WorldWideScience

Sample records for sand crushed sugarcane

  1. Studies on various characteristics of concrete structures using crushed sand

    International Nuclear Information System (INIS)

    Mimatsu, Makoto; Sugita, Hideaki; Yonemura, Masataka.

    1985-01-01

    With the recent advances of construction industry, the demands for concrete, hence for aggregate, are rising. The sand as such is in extreme shortage due to the exhaustion of river sand. Under the situation, the recent trends are for the use of crushed sand, i.e. the artificial sand obtained by crushing rocks, which have advantages of stabilized quality and adequate supplies. In building of nuclear power plants requiring large amounts of concrete, the usage of crushed sand is now unavoidable. The following are described : the situation of aggregate in Kyushu. production method of crushed sand and the quality standards, rocks used for crushed stone and sand and the properties, quality survey on crushed sand and the basic tests, characteristic tests of crushed-stone and -sand mixed concrete, the application of crushed sand in structures of the Sendai Nuclear Power Station. (Mori, K.)

  2. Crushed rock sand – An economical and ecological alternative to natural sand to optimize concrete mix

    Directory of Open Access Journals (Sweden)

    Sanjay Mundra

    2016-09-01

    Full Text Available The study investigates the use of crushed rock sand as viable alternative to Natural River sand that is being conventionally used as fine aggregate in cement concrete. Various mix designs were developed for different grades of concrete based on IS, ACI and British codes using Natural River sand and crushed rock sand. In each case, the cube compressive strength test, and beam flexure tests were conducted. The results of the study show that, the strength properties of concrete using crushed rock sand are nearly similar to the conventional concrete. The study has shown that crushed stone sand can be used as economic and readily available alternative to river sand and can therefore help to arrest the detrimental effects on the environment caused due to excessive mining of river sand.

  3. Research for the development of the crushed sand (II)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Chul Whan; Kang, Sun Duck; Min, Jeong Sik; Synn, Joong Ho; Park, Chan [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    The sand obtained from river is not sufficient in amount for the demand of construction industry. The production of sand from sea and mountain is rapidly increasing for the substitution of the river sand. The industry of the crushed sand has recently been bricked for the above. Crushing, classification and dewatering are the main processes in the crushed sand production. This report concentrates the improvement of classification technology and the quality of ready mixed concrete. Air separator with testing size for the classification in the process of dry system was developed by the Yeung Nam university. This plant has the excellent efficiency for the collection of fine powder, but needs the improvement for separating function. The collection efficiency of the testing size air separator is reached to 99% in the condition of high revolution and low feeding speed. The classification efficiency is checked about 50% maximum in the condition of 200 rpm and dry sample. Energy saving test was carried out in the production process of the dry system with the rock samples of 14-17% of water content. The classification efficiency for dewatering sample passed the heating process was analysed 91.5%. But that for high water content sample skipped the heating process was analysed more or less 77%. Even though the heating process causes the classification efficiency being high, the energy consumption can also cause the price of the crushed sand high. Water content of sample as the effective element for the optimization of classification efficiency and energy saving should be studied next year. The quality of crushed sand in the mixing design. The test was carried out with the various content in mixing, the strength of ready mixed concrete has the maximum for the mould with 50-60% content of crushed sand. This strength is higher by 5-30% than 30% content and by 20-32% than 0% content, which means that the industry has the possibility of progress. (author). 10 refs., 31 tabs., 49

  4. Physical, mechanical and thermal properties of Crushed Sand Concrete containing Rubber Waste

    Directory of Open Access Journals (Sweden)

    Mohamed Guendouz

    2018-01-01

    Full Text Available Over the past twenty years, the rubber wastes are an important part of municipal solid waste. This work focuses on the recycling of rubber waste, specifically rubber waste of used shoes discharged into the nature and added in the mass of crushed sand concrete with percentage (10%, 20%, 30% and 40%. The physical (workability, fresh density, mechanical (compressive and flexural strength and thermal (thermal conductivity of different crushed sand concrete made are analyzed and compared to the respective controls. The use of rubber waste in crushed sand concrete contributes to reduce the bulk density and performance of sand concrete. Nevertheless, the use of rubber aggregate leads to a significant reduction in thermal conductivity, which improves the thermal insulation of crushed sand concrete.

  5. Effect of Crushed Sandstone Sand on the Properties of High ...

    African Journals Online (AJOL)

    This paper presents results of the laboratory investigation on high performance concrete (HPC) using crushed sandstone sand as 20%, 40%, and 60% replacement of river sand together with superplastisizer and silica fume (SF). The fresh concrete properties such as slump, air content and fresh concrete density have been ...

  6. Mix proportioning and performance of a crushed limestone sand-concrete

    OpenAIRE

    Makhloufi Zoubir; Bouziani Tayeb; Bédérina Madani; Hadjoudja Mourad

    2014-01-01

    Satisfying the ever-growing demand of concrete aggregates poses a problem in many parts of the world due to shortage of natural sand. Moreover, to conserve natural resources and protect civil engineering infrastructures, there is a need to find alternative materials. Crushed stone sand has been identified as a potential substitute material for natural sand in making good quality concrete. The main objective of the present investigation is to determine an adequate mix design method and evaluat...

  7. Discrete element modeling of cemented sand and particle crushing at high pressures

    OpenAIRE

    de Bono, John Patrick

    2013-01-01

    This project aims to provide an insight into the behaviour of cemented sand under high pressures, and to further the understanding of the role of particle crushing. The discrete element method is used to investigate the micro mechanics of sand and cemented sand in high-pressure triaxial tests and one-dimensional normal compression. Using the software PFC3D, a new triaxial model has been developed, which features an effective flexible membrane that allows free deformation of the specimen ...

  8. Effect of crushed sand on mortar and concrete rheology

    Directory of Open Access Journals (Sweden)

    Cabrera, O. A.

    2011-09-01

    Full Text Available This article describes an experimental study conducted on fresh mortars and concretes made with crushed sand. The aim of this research was to assess the effect of aggregate particle shape and surface texture as well as dust content on mortar and concrete rheology. The experimental programme also addressed the impact of angular grains on chemical admixture performance and concrete bleeding. The findings showed that the use of crushed sand induces rheological behaviour that differs from the behaviour observed in natural sand and that superplasticisers can improve this behaviour considerably.

    En el presente trabajo se plantea un estudio experimental del estado fresco de morteros y hormigones con arenas de machaqueo, orientado a la evaluación de la incidencia de la forma y textura superficial de los granos del árido fino y del contenido de polvo sobre la reología de las mezclas. El programa experimental comprendió el estudio del estado fresco de hormigones con arenas con partículas angulares, la influencia de este tipo de partículas sobre la efectividad de los aditivos químicos y la evaluación de la influencia de las características físicas del árido fino sobre la exudación. Los resultados muestran que el empleo de arenas de machaqueo provoca un comportamiento reológico diferente al de hormigones con arenas naturales, y que el efecto de los aditivos superfluidificantes mejora notablemente este comportamiento.

  9. Flowability in crushed sand mortar

    Directory of Open Access Journals (Sweden)

    Cabrera, O. A.

    2010-12-01

    Full Text Available The present experimental study explored the relationship between mortar flowability and the voids content in crushed sand to determine the effect of grain shape and surface texture as well as dust content on the behaviour of fresh mortar. The findings revealed a close correlation between voids content and the volume of paste needed for mortar to begin to flow as a continuous material, mortar flowability and the water content needed to attain a given flowability. The comparison of the empirical findings to the results obtained with the Larrard (1, 2 model provided further information on the effect of sand grain morphology on fresh mortars.

    En el presente trabajo se plantea un estudio experimental de la fluidez de morteros basado en el contenido de vacíos de arenas machacadas, para comprender la influencia de la forma y textura superficial de los granos de arena y del contenido de polvo de las mismas sobre el estado fresco de morteros. Los resultados muestran la estrecha relación entre el contenido de vacíos entre granos y los volúmenes de pasta necesarios para iniciar el escurrimiento como un material continuo, la fluidez de los morteros, el contenido de agua para alcanzar una determinada fluidez, etc. El comportamiento evaluado se compara con resultados obtenidos aplicando el modelo de F. de Larrard (1, 2, permitiendo de este modo obtener mayor información de la influencia de la morfología de los granos de la arena sobre el estado fresco de los morteros.

  10. Crushed and River-Origin Sands Used as Aggregates in Repair Mortars

    Directory of Open Access Journals (Sweden)

    Maria Stefanidou

    2016-04-01

    Full Text Available The systematic analysis of mortars from monuments or historic buildings and the simultaneous study of the construction environment show that it was common practice to use naturally occurring sand from local rivers or streams for the production of the mortars. There are cases though, mainly on islands, where sands of natural origin were limited, and marine or crushed sands were used possibly after elaboration. In all cases the particle size analysis of old mortar confirms the presence of even distribution of the granules. As regards the design of the repair mortars, there are criteria that should be taken into consideration in order to produce materials with compatible properties. The main properties concerning sands are the grain distribution and maximum size, the color, the content of fines, and soluble salts. The objective of this research is the study of the physical characteristics of the sands such as the sand equivalent, the gradation, the apparent density, the morphology of the grains, their mineralogical composition and the influence of these properties on the behavior of lime mortars, notably the mechanical and physical properties acquired.

  11. Sugarcane Yield Response to Furrow-Applied Organic Amendments on Sand Soils

    Directory of Open Access Journals (Sweden)

    J. Mabry McCray

    2015-01-01

    Full Text Available Organic amendments have been shown to increase sugarcane yield on sand soils in Florida. These soils have very low water and nutrient-holding capacities because of the low content of organic matter, silt, and clay. Because of high costs associated with broadcast application, this field study was conducted to determine sugarcane yield response to furrow application of two organic amendments on sand soils. One experiment compared broadcast application (226 m3 ha−1 of mill mud and yard waste compost, furrow application (14, 28, and 56 m3 ha−1 of these materials, and no amendment. Another experiment compared furrow applications (28 and 56 m3 ha−1 of mill mud and yard waste compost with no amendment. There were significant yield (t sucrose ha−1 responses to broadcast and furrow-applied mill mud but responses to furrow applications were not consistent across sites. There were no significant yield responses to yard waste compost suggesting that higher rates or repeated applications of this amendment will be required to achieve results comparable to mill mud. Results also suggest that enhancing water and nutrient availability in the entire volume of the root zone with broadcast incorporation of organic amendments is the more effective approach for low organic matter sands.

  12. Use of Crushed Granite Fine as Replacement to River Sand in Concrete Production

    Directory of Open Access Journals (Sweden)

    Manasseh JOEL

    2010-12-01

    Full Text Available The suitability of Crushed granite fine (CGF to replace river sand in concrete production for use in rigid pavement was investigated. Slump, compressive and indirect tensile strength tests were performed on fresh and hardened concrete.28 days Peak compressive and indirect tensile strength values of 40.70N/mm2 and 2.30N/mm2 respectively was obtained, with the partial replacement of river sand with 20% CGF, as against values of 35.00N/mm2 and 1.75N/mm2, obtained with the use of river sand as fine aggregate. Based on economic analysis and results of tests, river sand replaced with 20% CGF is recommended for use in the production of concrete for use in rigid pavement. Conservation of river sand in addition to better ways of disposing wastes from the quarry sites are some of the merits of using CGF.

  13. Investigation of Water Holding Capacity of Sugarcane Mulch for Sand Dune Stabilization in Ahvaz

    Directory of Open Access Journals (Sweden)

    T. Jamili

    2017-01-01

    Full Text Available Introduction: Wind erosion is one of the most serious problems in southwest Iran. Fine-grained structure of sand dunes with not enough strong composition and their low moisture retention property make them susceptible to wind erosion. They lack organic matter and are considered inherently of low fertility (Ahmadi, 2002. Studies have shown that non-erodible materials which include bentonite clay (Diouf et al., 1990, ureamelamine formaldehyde and urea–formaldehyde with 0.25% sodium chloride (Lahalih and Ahmed, 1998, acids, enzymes, lignosulfonates, polymers, tree resins (Santoni et al., 2001, waterborne polymer emulsion (Al-Khanbashi and Abdalla, 2006, polyvinyl alcohol and a polyvinyl acetate emulsion (Newman et al., 2005; Han et al., 2007, ash and polyacrylamide (Yang and Zejun, 2012.have significant potential in reducing wind erosion The area under farming of sugarcane in Khuzestan, Iran, is more than 130,000, ha. Vinasse and Filter Kike are two organic ingredients of sugarcane residues which are generated as byproduct materials insugarcane processing. In recent years these residues have been released into the environment and cause it regarded as water pollutant. Over 800,000 m3 of Vinasse is annually stored in each agro-industry. Vinasse also is rich in K, Ca, and Mg with moderate amounts of P and N,and non toxic complexes or heavy metals. Filter Kike is another residue produced in huge amounts by the agro-industry that is composed of cellulosic substances, CaCO3, N, P, K, organic matter, and clay. Therefore, the objective of this research is to investigate the effect of sugarcane mulch on water holding capacity in soil. This study is performed to evaluate the feasibility of using sugarcane residues inproduce of ecofriendly mulches for environmental use. In order of achieving these goals, Vinase, Filter Cake, and clay soil from near the sand dunes were used as sugarcane mulches. Further comparison between traditional oil mulches and

  14. Determination of flavonoids in cultivated sugarcane leaves, bagasse, juice and in transgenic sugarcane by liquid chromatography-UV detection.

    Science.gov (United States)

    Colombo, Renata; Lanças, Fernando M; Yariwake, Janete H

    2006-01-20

    A high-performance liquid chromatography (HPLC) method with photo-diode array (DAD) detection was developed to separate and quantify flavonoids in sugarcane leaves and bagasse (= the crushed sugarcane refuse from juice extraction), and in sugarcane juice. Sugarcane flavonoids consist of a complex mixture of aglycones and glycosides (including flavonolignan glycosides), and the HPLC-UV method herein proposed is suitable for their quantification as total flavonoids. This method was applied to analyze samples of cultivated sugarcane, commercial juice and transgenic sugarcane leaves. Sugarcane leaves proved a promising source of flavonoids: an average of 1.10 mg of total flavonoids/g plant material was found in fresh leaves. Moreover, the flavonoid content of sugarcane juice (0.6 mg/mL) is comparable to other food sources of flavonoids previously reported. Transgenic sugarcane leaves ("Bowman-Birk" and "Kunitz") were compared with non-modified ("control") plant samples using the proposed HPLC-UV method, which indicated that the content of total flavonoids in transgenic plants is different from that in non-modified sugarcane.

  15. Assessment of crushed-recycled glass as filter media for drinking water treatment

    International Nuclear Information System (INIS)

    Rutledge, S.O.; Fahie, C.; Gagnon, G.A.

    2002-01-01

    The objective of this project was to evaluate the performance of a pressure filter utilizing crushed glass as the filter media. The performance of the crushed glass filter was compared to that of a sand filter. The research was conducted in Orangedale, Nova Scotia, which is a small community of with a population of approximately 500. Orangedale is located on the south shore of Bras d'Or Lakes and feeds into Miller Pond, which serves as the source the of drinking water. The Orangedale treatment plant produces an average daily flow of 35 m3/d (6.4-gpm). The treatment plant consists of coagulation (sodium aluminate and polyaluminum chloride), flocculation, dissolved air flotation (DAF), disinfection with sodium hypochlorite and dual-media filtration with anthracite and sand. In general, the particle removal capabilities of the crushed glass filter were slightly poorer than that of a sand filter, as quantified in a field application in the community of Orangedale, Nova Scotia. It was found that the crushed glass used in this project had a higher angularity and slightly higher uniformity coefficient. During initial start-up the performance of the crushed glass filter was more variable and appeared to improve as the glass began to wear. After six-months of use the crushed glass filter was able to produce a very consistent filter effluent that was only slightly greater than the silica sand filter. After six-months of use, the sand filter achieved a 1.6 log-removal of particles with diameters greater than 2 μm; whereas the crushed glass filter achieved a 1.4 log removal for the similar particle size range. The observed removal performance was particularly encouraging given that the sand used had properties that were consistent with the standards set by the American Water Works Association. The crushed glass filter media was initially sieved and washed, but had no other pre-treatment preparation. Thus the application of crushed glass shows considerable promise as filter

  16. Evaluation of crushed aggregate and sand-bentonite mixtures for application to sealing of the final repository for reactor waste

    International Nuclear Information System (INIS)

    Vaajasaari, M.; Saari, K.; Wang Zhen

    1986-09-01

    The Industrial Power Company Ltd (TVO) is planning to dispose the low- and intermediate level waste from the reactors of the Olkiluoto Nuclear Power Station into the bedrock of Olkiluoto at a depth of approximately 50-100 meters. In the TVO concept the reactor waste is disposed in silo shaped rock caverns. The bituminized waste is packed into steel drums, which are laid into a concrete silo inside the rock cavern. In this study the properties of sands, crushed aggregate and their mixtures with bentonite are reviewed. The applicability of these materials for use as a buffer on the top of the concrete silo is evaluated. This study is based on earlier experimental studies of the materials mentioned before and available literature. Gas production in the silo after disposal is estimated. General concepts of gas conductivity and gas migration in saturated soil are reviewed. The results of this study suggest that crushed aggregate and sand-bentonite mixtures are possible sealing materials for the silo in concern. But the need for further experimental study of their physical and mechanical properties and the gas migration processes through the saturated barrier is emphasized. A program for testing of these properties is presented

  17. Strength Properties of Foamed Concrete Containing Crushed Steel Slag as Partial Replacement of Sand with Specific Gradation

    Directory of Open Access Journals (Sweden)

    Tiong Hock Yong

    2017-01-01

    Full Text Available Lightweight construction material, notably foamed concrete, had become more favourable to reduce building weight and cost, accelerate construction process, and ease handling of precast segment. Simultaneously, rapid development had result in price rising of conventional material and environmental issue due to abundant wastes, for instance steel slag. As a consequence, feasibility of steel slag to be incorporated in lightweight foamed concrete for both structural and nonstructural purpose is worth to be investigated. This paper is aimed to evaluate the effects of crushed steel slag, as partial replacement of sand with specific gradation, on performance of lightweight foamed concrete (LFC with density of 1600 kg/m3 to 1700 kg/m3 in terms of compressive and tensile strengths. Different steel slag based LFCs were developed by replacing 0, 25, 50, 75 and 100% of steel slag for sand. Different water to cement ratios (w/c and dosages of super-plasticizer (sp were adopted to confirm certain workability, strength properties was then studied for ages of 7 and 28 days. The laboratory results showed that lightweight foamed concrete with incorporation of crushed steel slag has decreased strength; however it still achieves structural strength of 17 MPa when replacement level is less than 25% at density of 1600 kg/m3 to 1700 kg/m3.

  18. AE Test of Calcareous Sands with Particle Rushing

    Directory of Open Access Journals (Sweden)

    Tan Fengyi

    2017-08-01

    Full Text Available The particle of calcareous sands was forced to crush, then the energy from the crushing was released by the form of sound waves. Therefore the AE technique was used to detect the calcareous sands AE signal when it crushed. by to study the AE characteristics, the mechanics of calcareous sands was studied. Study showed that: (1 there was the AE activities on the low confining pressure condition at the beginnig of test, (2 there was more and more AE activities with the continuing of test until to the end, (3 the calcareous sands’ AE activities was on the whole testing, (4 the calcareous sands’ particle crushing and mutual friction played different roles for its AE activities. Then the AE model based on the calcarous sands’ particle crushing was discussed.

  19. Registration of ‘CP 09-1822’ Sugarcane

    Science.gov (United States)

    ‘CP 09-1822’ (Reg. No. __; PI 686942 sugarcane (a complex hybrid of Saccharum spp.) was released in June 2016 for commercial cultivation on sand (mineral) soils in Florida. This cultivar was developed through a collaborative sugarcane cultivar development program of the USDA-ARS, the University of F...

  20. Utilization of crushed clay brick in cellular concrete production

    Directory of Open Access Journals (Sweden)

    Ali A. Aliabdo

    2014-03-01

    Full Text Available The main objective of this research program is to study the effect of using crushed clay brick as an alternative aggregate in aerated concrete. Two series of mixtures were designed to investigate the physico-mechanical properties and micro-structural analysis of autoclave aerated concrete and foamed concrete, respectively. In each series, natural sand was replaced with crushed clay brick aggregate. In both series results showed a significant reduction in unit weight, thermal conductivity and sound attenuation coefficient while porosity has increased. Improvement on compressive strength of autoclave aerated concrete was observed at a percentage of 25% and 50% replacement, while in foamed concrete compressive strength gradually decreased by increasing crushed clay brick aggregate content. A comparatively uniform distribution of pore in case of foamed concrete with natural sand was observed by scanning electron microscope, while the pores were connected mostly and irregularly for mixes containing a percentage higher than 25% clay brick aggregate.

  1. Shape Effect of Crushed Sand Filler on Rheology: A Preliminary Experimental and Numerical Study

    DEFF Research Database (Denmark)

    Spangenberg, Jon; Cepuritis, Rolands; Hovad, Emil

    2016-01-01

    Two types of filler from crushed sand were mixed with cement paste with constant superplasticizer dosage per mass of cement to investigate how their shape affects the rheology. The fillers were mylonitic quartz diorite and limestone produced using Vertical Shaft Impact (VSI) crusher and air...... was quantified with the slump flow test (i.e. mini cone). The shape effect was isolated in the experiments by the use of non overlapping bimodal particle distributions of cement particles with a number average diameter of approximate to 0.01 mm and filler particles with a number average diameter of approximate...... to 0.1 mm. The two filler types were tested with a range of chi-values (volume of cement divided by total volume of solids). The flowability of the matrix increased with decreasing aspect ratios of the filler. However, the chi-value at which the maximum volume fraction threshold was obtained varied...

  2. Effect of feed source and pyrolysis conditions on sugarcane bagasse biochar

    Science.gov (United States)

    Processing of sugarcane in sugar mills yield ca. 30% bagasse, a fibrous waste material composed mostly of crushed cane stalks. While 80-90% of the bagasse used on site as fuel, the remaining portion can be converted into a value-added product. One such option is thermal conversion of bagasse into bi...

  3. PRODUÇÃO E QUALIDADE DE MELÃO RENDILHADO SOB DIFERENTES SUBSTRATOS EM CULTIVO PROTEGIDO

    Directory of Open Access Journals (Sweden)

    DANILO MESQUITA MELO

    2012-01-01

    Full Text Available This paper aimed to evaluate the performance of hybrids of muskmelon on different substrates. Five substrates were evaluated: S1 = coconut husk fiber, S2 = sand; S3 = ½ sand and ½ crushed of sugarcane, S4 = ½ sand and ½ of peanut shell, and S5 = I sand, I of crushed sugarcane and I of peanut shell and four hybrids of muskmelon (Bonus N°. 2, Louis, Fantasy Jab and 2007 # 16. The plants were cultivated in plastic pots of 13 dm3, which were filled with these substrates; they were arranged in plants spacing of 1,0 x 0,5 m between plants. The Fertirrigation was done by dripping, using a nutrient solution for the culture. The experimental design was a randomized blocks, in a 5 X 4 factorial design with four replications. The characteristics evaluated were: total production, average transverse and longitudinal diameter of fruit, fruit shape index; mesocarp thickness; average transverse and longitudinal diameter of the locule; index format locule; mass of fresh fruit; soluble solids, pH; titratable acidity; C vitamin; firmness of flesh; tracery of shell; and maturation index. The optimal substrate for muskmelon cultivation is a combination of 50% sand + 50% peanut shell. The hybrid Fantasy performed better compared to other hybrids.

  4. Field test on sand compaction pile method with copper slag sand; Dosuisai slag wo mochiita SCP koho no shiken seko

    Energy Technology Data Exchange (ETDEWEB)

    Minami, K.; Matsui, H.; Naruse, E.; Kitazume, M. [Port and Harbour Research Inst., Kanagawa (Japan)

    1997-09-20

    This paper describes the sand compaction pile (SCP) method using copper slag sand. The SCP method is a method by which sand compaction piles are constructed in the ground, and improvement can be obtained in a short period. This method has been widely used even in the port areas for enhancing the bearing power of soft clay ground and the lateral resistance of sheet pile. A great deal of sand is required as a material. The sand requires high permeability, proper size distribution with less fine particle fraction content, easy compaction property with enough strength, and easy discharging property from the casing of construction machines as required properties. Recently, it becomes hard to secure proper sand materials. The copper slag sand is obtained from refining process of copper as a by-product which is quenched in water flow and crushed in water. The copper slag sand has higher particle density than that of sand, excellent permeability, and similar size distribution to that of sand. From compaction drainage triaxial compression test and permeability test, it was found that the mechanical properties of copper slag sand did not change by the crushing of grains with keeping excellent permeability. Through the test construction, applicability of the copper slag sand to the SCP method could be confirmed as an alternate material of sand. 17 refs., 9 figs., 4 tabs.

  5. Effect of Natural Sand Percentages on Fatigue Life of Asphalt Concrete Mixture

    Directory of Open Access Journals (Sweden)

    Nahla Yassub Ahmed

    2016-03-01

    Full Text Available The design of a flexible pavement requires the knowledge of the material properties which are characterized by stiffness and fatigue resistance. The fatigue resistance relates the number of load cycles to failure with the strain level applied to the asphalt mixture. The main objective of this research is the evaluation of the fatigue life of asphalt mixtures by using two types of fine aggregate having different percentages. In this study, two types of fine aggregate were used natural sand (desert sand and crushed sand. The crushed sand was replaced by natural sand (desert sand with different percentages (0%, 25%, 75% and 100% by the weight of the sand (passing sieve No.8 and retained on sieve No.200 and one type of binder (40/50 penetration from Al-Daurah refinery. The samples of beams were tested by four point bending beam fatigue test at the control strain mode (250, 500 and 750 microstrain while the loading frequency (5Hz and testing temperature (20oC according to (AASHTO T321. The experimental work showed that fatigue life (Nf and initial flexural stiffness increased when control strain decreased for asphalt mixtures. Acceptable fatigue life at 750 microstrain was obtained with asphalt concrete mixtures containing 100% crushed sand as well as asphalt concrete contained 25% natural sand. The asphalt concrete contained 100% and 75% of natural sand exhibited high fatigue life at low level of microstrain (250. The main conclusion of this study found that best proportion of natural sand to be added to an asphaltic concrete mixture is falling within the range (0% and 25% by weight of fraction (passing No.8 and retained on No.200 sieve .

  6. Exploratory study of crushed coconut shell as partial replacement for ...

    African Journals Online (AJOL)

    The trend shows a decrease in strength as the quantity of CCS in the concrete cubes increases. The workability of the concrete decreased as the quantity of CSS increased with the mould slumping at 100% CSS. Aggregate Crushing Value (ACV) for CSS is 8% and that for fine sand is 17.89%,, while Aggregate Impact ...

  7. The Effect of the Kind of Sands and Additions on the Mechanical Behaviour of S.C.C

    Science.gov (United States)

    Zeghichi, L.; Benghazi, Z.; Baali, L.

    The sand is an inert element essential in the composition of concrete; its use ensures granular continuity between the cement and gravel for better cohesion of concrete. This paper presents the results of a study that investigated the influence of sand quality on the properties of fresh and hardened self-compacting concrete (SCC). The dune sands are very fine materials characterized by a high intergranular porosity, high surface area and low fineness modulus; on the other hand crushed (manufactured) sand has a high rate into thin and irregular shapes which are influencing the workability of concrete. The amount of dune sand varies from (0% 50%, to 100%) by weight of fine aggregates. The effect of additions is also treated (blast furnace slag and lime stone) The results show that the rheological properties favour the use of dune sands; however the mechanical properties support the use of crushed sand.

  8. Conditions of Thermal Reclamation Process Realization on a Sample of Spent Moulding Sand from an Aluminum Alloy Foundry Plant

    Directory of Open Access Journals (Sweden)

    Łucarz M.

    2017-06-01

    Full Text Available The results of investigations of thermal reclamation of spent moulding sands originating from an aluminum alloy foundry plant are presented in this paper. Spent sands were crushed by using two methods. Mechanical fragmentation of spent sand chunks was realized in the vibratory reclaimer REGMAS. The crushing process in the mechanical device was performed either with or without additional crushing-grinding elements. The reclaimed material obtained in this way was subjected to thermal reclamations at two different temperatures. It was found that a significant binder gathering on grain surfaces favors its spontaneous burning, even in the case when a temperature lower than required for the efficient thermal reclamation of furan binders is applied in the thermal reclaimer. The burning process, initiated by gas burners in the reclaimer chamber, generates favorable conditions for self-burning (at a determined amount of organic binders on grain surfaces. This process is spontaneously sustained and decreases the demand for gas. However, due to the significant amount of binder, this process is longer than in the case of reclaiming moulding sand prepared with fresh components.

  9. DK crush (double-kissing and double-crush) technique for treatment of true coronary bifurcation lesions: illustration and comparison with classic crush.

    Science.gov (United States)

    Chen, Shaoliang; Zhang, Junjie; Ye, Fei; Zhu, Zhongsheng; Lin, Song; Shan, Shoujie; Kwan, Tak W

    2007-04-01

    Classic crush has a lower success rate compared to final kissing balloon inflation (FKBI). We previously reported the double-kissing (DK) crush technique that involves double-kissing along with double-crushing for the treatment of true bifurcation coronary lesions in 2005. This is a consecutive, nonrandomized, open-label study. Eighty-eight consecutive patients with single, true coronary bifurcation lesions according to Lefevre Classification2 and side branch diameter >2.0 mm were enrolled. The first 44 patients (from October 2004 to January 2005) were assigned to the classic crush treatment arm and the next 44 patients (from February 2005 to June 2005) were assigned to the DK crush technique arm, respectively. Data within 30 days were analyzed. Patients in the DK crush group, compared to those in classic crush group, were characterized by longer lesion length in the side branch (13.5 +/- 3.4 mm vs 7.8 +/- 3.1 mm; p DK crush group, as well as longer lesion length in the main vessel (24.3 +/- 8.6 mm vs 21.1 +/- 7.3 mm), though without significant differences (p >0.05). Subacute stent thrombosis was detected in 2 patients with failure of FKBI in the classic crush group (4.3%). In addition, patients in the classic crush group were characterized by a smaller minimum lumen diameter (MLD) at the side branch ostium (2.74 +/- 0.12 mm vs 3.01 +/- 0.13 mm; p DK crush has the potential to improve the clinical outcome in patients with coronary bifurcation lesions. Further randomized, prospective, multicenter studies are required to confirm these differences between the classic crush and DK crush techniques.

  10. Modelling the behavior of an oil saturated sand

    International Nuclear Information System (INIS)

    Evgin, E.; Altaee, A.; Lord, S.; Konuk, I.

    1990-01-01

    The experiments carried out in an earlier study show the oil contamination affects the strength and deformation characteristics of a crushed quartz sand. In the present study, a mathematical soil model is used to simulate the mechanical behavior of the same sand. The model parameters are determined for both clean and oil contaminated soil. Simulations are made for the stress-strain behavior of the soil in drained and undrained conventional traixial compression tests. In order to illustrate the effect of changes in the soil properties on the behavior of an engineering structure, a finite element analysis is carried out. In this paper comparative results are presented to show the differences in the behavior of a foundation resting on a clean sand, on an oil contaminated sand, and on a sand contaminated locally

  11. Automation for Crushing and Screening Equipment to Produce Graded Paving Crushed Stone

    Science.gov (United States)

    Tikhonov, Anatoly; Velichkin, Vladimir

    2017-10-01

    This paper offers analysis of factors related to production and storage of graded crushed stone, which adversely impact the service life and wear resistance of asphalt-concrete motor road pavements. The paper describes external and technology-related parameters that may cause changes of the preset ratio in graded crushed stone. Control factors are described that ensure the formulated fraction ratio in crushed stone by controlling the operation mode of the crushing and screening equipment. The paper also contains an ACS flow chart for crushing and screening equipment engaged in continuous closed-cycle two-stage technology. Performance of the ACS to maintain the preset fractionated crushed stone ratio has been confirmed with a mathematical model.

  12. Crush Grinding

    International Nuclear Information System (INIS)

    Nguyen, T.Q.

    2005-01-01

    Crush Grinding is a special process used at the Kansas City Plant to finish stem sections of reservoir products. In this process, a precise profile of the desired product is formed on a tungsten carbide roll. This roll slowly transfers a mirror image of the profile onto the grinding surface of a wheel. The transfer rate of the profile is between 0.001 and 0.010 inches per minute. Crush grinding is desirable since it provides consistent surface finishes and thin walls at a high production rate. In addition, it generates very sharp fillet radii. However, crush grinding is a complex process since many variables affect the final product. Therefore, the process requires more attention and knowledge beyond basic metal removal practices. While the Kansas City Plant began using these machines in 1995, a formal study regarding crush grinding has not been conducted there. In addition, very little literature is available in the grinding industry regarding this process. As a result, new engineers at the Kansas City Plant must learn the process through trial and error. The purpose of this document is to address this literature deficit while specifically promoting a better understanding of the stem crush grinding process at the Kansas City Plant.

  13. Engineering Behavior and Characteristics of Wood Ash and Sugarcane Bagasse Ash

    Directory of Open Access Journals (Sweden)

    Francisco Grau

    2015-10-01

    Full Text Available Biomasses are organic materials that are derived from any living or recently-living structure. Plenty of biomasses are produced nationwide. Biomasses are mostly combusted and usually discarded or disposed of without treatment as biomass ashes, which include wood and sugarcane bagasse ashes. Thus, recycling or treatment of biomass ashes leads to utilizing the natural materials as an economical and environmental alternative. This study is intended to provide an environmental solution for uncontrolled disposal of biomass ashes by way of recycling the biomass ash and replacing the soils in geotechnical engineering projects. Therefore, in this study, characteristic tests of wood and sugarcane bagasse ashes that are considered the most common biomass ashes are conducted. The test of chemical compositions of biomass ashes is conducted using energy dispersive X-ray spectroscopy (EDS, and Scanning Electron Microscope (SEM, and heavy metal analysis is also conducted. Engineering behaviors including hydraulic conductivity, constrained modulus and shear modulus are examined. Also, coal fly ash Class C is used in this study for comparison with biomass ashes, and Ottawa 20/30 sands containing biomass ashes are examined to identify the soil replacement effect of biomass ashes. The results show that the particle sizes of biomass ashes are halfway between coal fly ash Class C and Ottawa 20/30 sand, and biomass ashes consist of a heterogeneous mixture of different particle sizes and shapes. Also, all heavy metal concentrations were found to be below the US Environmental Protection Agency (EPA maximum limit. Hydraulic conductivity values of Ottawa 20/30 sand decrease significantly when replacing them with only 1%–2% of biomass ashes. While both the constrained modulus and shear modulus of biomass ashes are lower than Ottawa 20/30 sand, those of mixtures containing up to 10% biomass ashes are little affected by replacing the soils with biomass ashes.

  14. Fisher Sand & Gravel New Mexico, Inc. General Air Quality Permit: Related Documents

    Science.gov (United States)

    Documents related to the Fisher Sand & Gravel – New Mexico, Inc., Grey Mesa Gravel Pit General Air Quality Permit for New or Modified Minor Source Stone Quarrying, Crushing, and Screening Facilities in Indian Country.

  15. Valorisation du sable de concassage et du sable du désert dans la composition des bétons autoplaçants Valorization of the crushed sand and of the desert sand in the composition of the self compacting concrete

    Directory of Open Access Journals (Sweden)

    R’mili A.

    2012-09-01

    Full Text Available Les bétons autopla÷ants (BAP sont des bétons très fluides qui demandent des dosages élevés en sables et en éléments fins par rapport au béton ordinaire (BO. Le sable de concassage (SC, à granularité étalée, est un sous-produit de concassage des roches massives. Le sable du désert (SD est un sable extra-fin, caractérisé par une distribution serrée de grosseur des grains. Renfermant des teneurs importantes en fines, ces deux sables peuvent êtres des composants intéressants des BAP. Cette recherché consiste à incorporer le SC dans la composition des bétons et étudier l’effet de son remplacement progressif par le SD sur le comportement à l’état frais et durci des BAP. L’étude expérimentale montre que les paramètres d’ouvrabilité des BAP sont améliorés lorsque le SC est partiellement remplacé par le SD ( 30%, des quantités supplémentaires en eau et en superplastifiant sont nécessaires, pour répondre aux propriétés autopla÷antes. Les résistances mécaniques diminuent en ajoutant le SD au SC, mais elles atteignent des valeurs acceptables pour des dosages modérés en SD. Les performances des BAP sont nettement meilleures que celles des BO confectionnées avec les mêmes granulats. Les essais de spécification de la durabilité montrent que les coefficients d’absorption d’eau par capillarité et par immersion augmentent en ajoutant le SD au SC alors que le coefficient de perméabilité diminue. Self-compacting concretes (SCC are highly fluid concretes that require high proportions in sand and fine particles with respect to the ordinary concrete (OC. The crushed sand (CS, spread granulometry, is a by-product of crushing rock mass. The desert sand (DS is an extra fine sand, characterized by a tight distribution of grain size. Containing significant levels of fine sand, these two sands can be both interesting components of the SCC. This research is to incorporate the CS in the composition of concrete and

  16. A big step change : new mobile slurry preparation and crushing technology on the horizon

    Energy Technology Data Exchange (ETDEWEB)

    Budd, G.

    2007-09-15

    The efficiency and productivity of the trucks used in oil sands mining operations can be compromised by unstable terrain, and they consume large amount of fuel. Hydro-transport systems with slurry preparation facilities may soon eliminate the expenses associated with truck and shovel processes. The slurry preparation facilities use on-board reject handling systems to remove large pieces of ore that can't be used in crushers. However, they are hard to move. Researchers are now focusing on the development of a semi-mobile slurry preparation facility that uses mobile crushing and sizing equipment. The equipment uses large tractor tracks instead of wheels and tires, and can accomplish the same amount of work as 6 trucks. Using the system, mine scoop shovels dump ore into a hopper on the mobile unit. The ore is then conveyed to the mobile unit's onboard primary crusher or sizer. Staged crushing is combined with water addition and mixing at the mine site to prepare an oil and slurry ready for hydro-transport. It was concluded that the system may significantly reduce the use of shovel and truck operations in the oil sands industry. 2 figs.

  17. EXPERIMENTAL RESEARCH OF PROCESSING OF DUMP SAND-CLAY MIXES BY THE CENTRIFUGAL AND SHOCK CRUSHING

    Directory of Open Access Journals (Sweden)

    V. V. Vorobev

    2015-01-01

    Full Text Available Results of experimental research of processing of centrifugal and shock crushing of dump sandy-clay mixes are given. Use of products of processing of received mixes in foundry production and in production of asphalt concrete mixes allows to exclude transportation of the mix to dumping.

  18. Diffusion in the pore water of compacted crushed salt

    Energy Technology Data Exchange (ETDEWEB)

    Fluegge, Judith; Herr, Sebastian; Lauke, Thomas; Meleshyn, Artur; Miehe, Ruediger; Ruebel, Andre

    2016-07-15

    Diffusion of dissolved radionuclides in the pore water of compacted crushed salt in the long-term is the most relevant process for the release of radionuclides from a dedicated repository for high-level waste in a salt formation as has been shown in latest safety assessments and research projects /BUH 16/. So far, diffusion coefficients for free water have been applied for the diffusion in pore water in models for long-term safety assessments. This conservative assumption was used, because data on the diffusion coefficient of dissolved substances in crushed salt have been missing. Furthermore, the diffusion coefficient in the pore water was assumed to be constant and independent from the degree of compaction of the crushed salt. The work presented in this report was intended to contribute to fill this gap of knowledge about how the diffusion of radionuclides takes place in the compacted backfill of a repository in salt. For the first time, the pore diffusion coefficient as well as its dependence on the porosity of the crushed salt was determined experimentally by means of through-diffusion experiments using caesium as tracer. The results achieved in this project suggest that the diffusion in compacted crushed salt is not fully comparable to that in a homogeneous, temporally stable porous medium like sand or clay. The results obtained from four diffusion experiments show a remarkably different behaviour and all yield unique concentration versus time plots which includes highly temporal variable tracer fluxes with even full interruptions of the flux for longer periods of time. This effect cannot be explained by assuming a tracer transport by diffusion in a temporarily invariant pore space and / or under temporally invariant experimental conditions. From our point of view, a restructuring of the pore space seems to lead to closed areas of pore water in the sample which may open up again after some time, leading to a variable pore space and hence variable diffusive

  19. The changing face of oilsands mining : mobile crushing systems on the way

    Energy Technology Data Exchange (ETDEWEB)

    Cook, D.L.M.

    2007-06-15

    The mobile crushing system (MCS) is a new technology used in oil sand mining. With MCS, the crusher is moved right to the mine face where it is continuously loaded by shovel. The ore is then crushed on site and transported by a mobile conveyor for further processing. MMD Mineral Sizing (Canada) and Krupp Canada are the only 2 manufacturers that currently build MCS for the oilsands sector. Suncor, Albian Sands and Syncrude Canada are the 3 major oilsands operators currently using MCS. The benefits and challenges of MCS were presented. The use of large mobile surface mining equipment such as the MCS means that ground stability issues associated with large mobile truck and shovel mining operations will be reduced. In addition, given the current worker shortage in the mining industry, using single-stream mobile surface mining equipment means operators can reduce their labour force. However, some challenges remain. The sheer size and weight of the unit means it can deform the ground surface and sink under adverse conditions. Alternative tire and suspension concepts that may alleviate some of these stability issues are currently being researched. Other issues that may affect the performance of MCS include the oil sand density and viscosity around material flow. Syncrude Canada is considering the use of MCS technology to mitigate common oilsands-related environmental issues. It is also testing compact slurry preparation technology in which shovels will feed the oilsands directly into a MCS and then into the in-pit bitumen production system slurry equipment. The MCS unit at Suncor's mine cost $150 million. It has been running at 5,000 tonnes of ore per hour, equivalent to 15 loads of ore in the large trucks. Given the success of the unit, plans are in place for 5 more units to be in operation over the next 5 years. 4 figs.

  20. Sand dune of Ruby, Arizona, an anthropogenically created biodiversity hotspot for wasps and their velvet ant parasitoids

    Science.gov (United States)

    Justin O. Schmidt

    2013-01-01

    A large artificial sand dune composed of finely crushed mine tailings was produced by deep mining operations at Ruby, Arizona. Today, the ghost town of Ruby is an important historical location and biodiversity refuge, with the newly formed dune forming the core of the refuge. The dune provides ideal nesting habitat for at least 13 species of sand-loving wasps,...

  1. 21 CFR 137.195 - Crushed wheat.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Crushed wheat. 137.195 Section 137.195 Food and... Related Products § 137.195 Crushed wheat. Crushed wheat, coarse ground wheat, is the food prepared by so crushing cleaned wheat other than durum wheat and red durum wheat that, when tested by the method...

  2. Sugarcane-Biorefinery.

    Science.gov (United States)

    Vaz, Sílvio

    2017-03-17

    Concepts such as biorefinery and green chemistry focus on the usage of biomass, as with the oil value chain. However, it can cause less negative impact on the environment. A biorefinery based on sugarcane (Saccharum spp.) as feedstock is an example, because it can integrate into the same physical space, of processes for obtaining biofuels (ethanol), chemicals (from sugars or ethanol), electricity, and heat.The use of sugarcane as feedstock for biorefineries is dictated by its potential to supply sugars, ethanol, natural polymers or macromolecules, organic matter, and other compounds and materials. By means of conversion processes (chemical, biochemical, and thermochemical), sugarcane biomass can be transformed into high-value bioproducts to replace petrochemicals, as a bioeconomy model.

  3. Crush Testing at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Feldman, Matthew R.

    2011-01-01

    The dynamic crush test is required in the certification testing of some small Type B transportation packages. International Atomic Energy Agency regulations state that the test article must be 'subjected to a dynamic crush test by positioning the specimen on the target so as to suffer maximum damage.' Oak Ridge National Laboratory (ORNL) Transportation Technologies Group performs testing of Type B transportation packages, including the crush test, at the National Transportation Research Center in Knoxville, Tennessee (United States). This paper documents ORNL's experiences performing crush tests on several different Type B packages. ORNL has crush tested five different drum-type package designs, continuing its 60 year history of RAM package testing. A total of 26 crush tests have been performed in a wide variety of package orientations and crush plate CG alignments. In all cases, the deformation of the outer drum created by the crush test was significantly greater than the deformation damage caused by the 9 m drop test. The crush test is a highly effective means for testing structural soundness of smaller nondense Type B shipping package designs. Further regulatory guidance could alleviate the need to perform the crush test in a wide range of orientations and crush plate CG alignments.

  4. Classic crush and DK crush stenting techniques.

    Science.gov (United States)

    Zhang, Jun-Jie; Chen, Shao-Liang

    2015-01-01

    Clinical data have supported the advantages of the double kissing (DK) crush technique, which consists of stenting the side branch (SB), balloon crush, first kissing, stenting the main vessel (MV) and final kissing balloon inflation, for complex coronary bifurcation lesions compared to other stenting techniques. Careful rewiring from the proximal cell of the MV stent to make sure the wire is in the true lumen of the SB stent is key to acquiring optimal angiographic results. Balloon anchoring from the MV, alternative inflation and each kissing inflation using large enough non-compliant balloons at high pressure, and the proximal optimisation technique are mandatory to improve both angiographic and clinical outcomes. Stratification of a given bifurcation lesion is recommended before decision making.

  5. [Experimental study on establishment of a simple model of rats crush injury-crush syndrome].

    Science.gov (United States)

    Chen, Xi; Liu, Yuehong; Xu, Wei; Qin, Tingwu; Zhao, Luping; Liu, Shuping; Zhang, Yi; Tan, Hong; Zhou, Yu

    2013-01-01

    To establish a repeatable, simple, and effective model of rat crush injury and crush syndrome. A total of 42 female Sprague Dawley rats (2-month-old, (CS) so as to lay a foundation for further study on CS. weighing 160-180 g) were divided randomly into the control group (n=6) and experimental group (n=36). The rats of the experimental group were used to establish the crush injury and CS model in both lower limbs by self-made crush injury mould. The survival rate and hematuria rate were observed after decompression. The biochemical indexes of blood were measured at 2, 4, 8, 12, 24, and 48 hours after decompression. The samples of muscle, kidney, and heart were harvested for morphological observation. There was no treatment in the control group, and the same tests were performed. Seven rats died and 15 rats had hematuria during compression in the experimental group. Swelling of the lower limb and muscle tissue was observed in the survival rats after reperfusion. The liver function test results showed that the levels of alanine transaminase and aspartate aminotransferase in the experimental group were significantly higher than those in the control group (P congestion and swelling, renal tubular epithelial cell degeneration, edema, necrosis, and myoglobin tube type were found in the kidneys; and myocardial structure had no obvious changes. The method of the crush injury and CS model by self-made crush injury mould is a simple and effective procedure and the experimental result is stable. It is a simple method to establish an effective model of rats crush injury and CS.

  6. Thermophysical properties of reconsolidating crushed salt.

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Stephen J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Urquhart, Alexander [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-03-01

    Reconsolidated crushed salt is being considered as a backfilling material placed upon nuclear waste within a salt repository environment. In-depth knowledge of thermal and mechanical properties of the crushed salt as it reconsolidates is critical to thermal/mechanical modeling of the reconsolidation process. An experimental study was completed to quantitatively evaluate the thermal conductivity of reconsolidated crushed salt as a function of porosity and temperature. The crushed salt for this study came from the Waste Isolation Pilot Plant (WIPP). In this work the thermal conductivity of crushed salt with porosity ranging from 1% to 40% was determined from room temperature up to 300°C, using two different experimental methods. Thermal properties (including thermal conductivity, thermal diffusivity and specific heat) of single-crystal salt were determined for the same temperature range. The salt was observed to dewater during heating; weight loss from the dewatering was quantified. The thermal conductivity of reconsolidated crushed salt decreases with increasing porosity; conversely, thermal conductivity increases as the salt consolidates. The thermal conductivity of reconsolidated crushed salt for a given porosity decreases with increasing temperature. A simple mixture theory model is presented to predict and compare to the data developed in this study.

  7. Crushed Salt Constitutive Model

    International Nuclear Information System (INIS)

    Callahan, G.D.

    1999-01-01

    The constitutive model used to describe the deformation of crushed salt is presented in this report. Two mechanisms -- dislocation creep and grain boundary diffusional pressure solution -- are combined to form the basis for the constitutive model governing the deformation of crushed salt. The constitutive model is generalized to represent three-dimensional states of stress. Upon complete consolidation, the crushed-salt model reproduces the Multimechanism Deformation (M-D) model typically used for the Waste Isolation Pilot Plant (WIPP) host geological formation salt. New shear consolidation tests are combined with an existing database that includes hydrostatic consolidation and shear consolidation tests conducted on WIPP and southeastern New Mexico salt. Nonlinear least-squares model fitting to the database produced two sets of material parameter values for the model -- one for the shear consolidation tests and one for a combination of the shear and hydrostatic consolidation tests. Using the parameter values determined from the fitted database, the constitutive model is validated against constant strain-rate tests. Shaft seal problems are analyzed to demonstrate model-predicted consolidation of the shaft seal crushed-salt component. Based on the fitting statistics, the ability of the model to predict the test data, and the ability of the model to predict load paths and test data outside of the fitted database, the model appears to capture the creep consolidation behavior of crushed salt reasonably well

  8. Screening for sugarcane brown rust in first clonal stage of the Canal Point sugarcane breeding program

    Science.gov (United States)

    Sugarcane (Saccharum spp.) brown rust (caused by Puccinia melanocephala H. & P. Sydow) was first reported in the United States in 1978 and is still one of great challenges for sugarcane production. A better understanding of sugarcane genotypic variation in response to brown rust will help optimize b...

  9. The use of laboratory sand, soil and crushed-glass filter columns for polishing domestic-strength synthetic wastewater that has undergone secondary treatment.

    Science.gov (United States)

    Healy, M G; Burke, P; Rodgers, M

    2010-10-01

    The aim of this study was to examine the performance of intermittently loaded, 150 mm-diameter stratified filter columns of 2 depths (0.65 and 0.375 m) comprising different media--sand, crushed glass and soil--in polishing the effluent from a laboratory horizontal flow biofilm reactor (HFBR) treating synthetic domestic-strength wastewater. The HFBR has been successfully used to remove organic carbon and ammonium-nitrogen (NH4-N) from domestic wastewater. In this treatment method, wastewater is allowed to flow over and back along a stack of polyvinyl chloride (PVC) sheets. Biofilms on the sheets reduce organic carbon, suspended matter, and nutrients in the wastewater, but to achieve the quality of a septic tank system, additional treatment is required. In all filters, at a hydraulic loading rate of 100 L m(-2) d(-1), 40-65% of chemical oxygen demand (COD) and practically 100% of total suspended solids (TSS) were removed, nitrification was complete, and bacterial numbers were reduced by over 80%, with best removals achieved in the soil filters (93%). Soil polishing filters with the depth of 0.65 m performed best in terms of organic carbon, total nitrogen (Tot-N) and bacterial removal. Data from this preliminary study are useful in the design of treatment systems to polish secondary wastewaters with similar water quality characteristics.

  10. Factors Affecting Sugarcane Production in Pakistan

    Directory of Open Access Journals (Sweden)

    Adnan Nazir

    2013-05-01

    Full Text Available This study was undertaken to identify the factors affecting sugarcane production in Pakistan. Data were collected from 387 sugarcane growers from Sindh, Punjab and NWFP province. Data were collected during the period 2007-08. The study reveals that the costs of inputs of sugarcane i.e. urea, DAP, FYM, land preparation, seed and its application, weeding and cost of irrigation were the important factors which influenced on the returns of sugarcane growers. The effectiveness was examined by using the Cobb-Douglas production function; MVP and allocative efficiency were calculated. The coefficient of multiple determinations R2 was 0.9249, which indicated that 92% variation in the cost of inputs was explained by all explanatory variables and the adjusted R2 was 92%. The F-value was 666.94 and was highly significant at 5% level of significance, indicating that the regression model was well fitted. The high prices of inputs, low price of output, delay in payments and lack of scientific knowledge were the major problems in sugarcane production. In order to enhance the productivity of sugarcane in the country, government should solve the identified problems to increase the income of sugarcane growers.

  11. Sugarcane starch: quantitative determination and characterization

    Directory of Open Access Journals (Sweden)

    Joelise de Alencar Figueira

    2011-09-01

    Full Text Available Starch is found in sugarcane as a storage polysaccharide. Starch concentrations vary widely depending on the country, variety, developmental stage, and growth conditions. The purpose of this study was to determine the starch content in different varieties of sugarcane, between May and November 2007, and some characteristics of sugarcane starch such as structure and granules size; gelatinization temperature; starch solution filterability; and susceptibility to glucoamylase, pullulanase, and commercial bacterial and fungal α-amylase enzymes. Susceptibility to debranching amylolytic isoamylase enzyme from Flavobacterium sp. was also tested. Sugarcane starch had spherical shape with a diameter of 1-3 µm. Sugarcane starch formed complexes with iodine, which showed greater absorption in the range of 540 to 620 nm. Sugarcane starch showed higher susceptibility to glucoamylase compared to that of waxy maize, cassava, and potato starch. Sugarcane starch also showed susceptibility to debranching amylolytic pullulanases similar to that of waxy rice starch. It also showed susceptibility to α-amylase from Bacillus subtilis, Bacillus licheniformis, and Aspergillus oryzae similar to that of the other tested starches producing glucose, maltose, maltotriose, maltotetraose, maltopentose and limit α- dextrin.

  12. Crushing method for nuclear fuel powder

    International Nuclear Information System (INIS)

    Hasegawa, Shin-ichi; Tsuchiya, Haruo.

    1997-01-01

    A crushing medium is contained in mill pots disposed at the circumferential periphery of a main axis. The diameter of each mill pot is determined such that powdery nuclear fuels containing aggregated powders and ground and mixed powders do not reach criticality. A plurality of mill pots are revolved in the direction of the main axis while each pots rotating on its axis. Powdery nuclear fuels containing aggregated powders are conveyed to a supply portion of the moll pot, and an inert gas is supplied to the supply portion. The powdery nuclear fuels are supplied from the supply portion to the inside of the mill pots, and the powdery nuclear fuels containing aggregated powders are crushed by centrifugal force caused by the rotation and the revolving of the mill pots by means of the crushing medium. UO 2 powder in uranium oxide fuels can be crushed continuously. PuO 2 powder and UO 2 powder in MOX fuels can be crushed and mixed continuously. (I.N.)

  13. Prospecting sugarcane resistance to Sugarcane yellow leaf virus by genome-wide association.

    Science.gov (United States)

    Debibakas, S; Rocher, S; Garsmeur, O; Toubi, L; Roques, D; D'Hont, A; Hoarau, J-Y; Daugrois, J H

    2014-08-01

    Using GWAS approaches, we detected independent resistant markers in sugarcane towards a vectored virus disease. Based on comparative genomics, several candidate genes potentially involved in virus/aphid/plant interactions were pinpointed. Yellow leaf of sugarcane is an emerging viral disease whose causal agent is a Polerovirus, the Sugarcane yellow leaf virus (SCYLV) transmitted by aphids. To identify quantitative trait loci controlling resistance to yellow leaf which are of direct relevance for breeding, we undertook a genome-wide association study (GWAS) on a sugarcane cultivar panel (n = 189) representative of current breeding germplasm. This panel was fingerprinted with 3,949 polymorphic markers (DArT and AFLP). The panel was phenotyped for SCYLV infection in leaves and stalks in two trials for two crop cycles, under natural disease pressure prevalent in Guadeloupe. Mixed linear models including co-factors representing population structure fixed effects and pairwise kinship random effects provided an efficient control of the risk of inflated type-I error at a genome-wide level. Six independent markers were significantly detected in association with SCYLV resistance phenotype. These markers explained individually between 9 and 14 % of the disease variation of the cultivar panel. Their frequency in the panel was relatively low (8-20 %). Among them, two markers were detected repeatedly across the GWAS exercises based on the different disease resistance parameters. These two markers could be blasted on Sorghum bicolor genome and candidate genes potentially involved in plant-aphid or plant-virus interactions were localized in the vicinity of sorghum homologs of sugarcane markers. Our results illustrate the potential of GWAS approaches to prospect among sugarcane germplasm for accessions likely bearing resistance alleles of significant effect useful in breeding programs.

  14. Evaluation of the Effects of Crushed and Expanded Waste Glass Aggregates on the Material Properties of Lightweight Concrete Using Image-Based Approaches.

    Science.gov (United States)

    Chung, Sang-Yeop; Abd Elrahman, Mohamed; Sikora, Pawel; Rucinska, Teresa; Horszczaruk, Elzbieta; Stephan, Dietmar

    2017-11-25

    Recently, the recycling of waste glass has become a worldwide issue in the reduction of waste and energy consumption. Waste glass can be utilized in construction materials, and understanding its effects on material properties is crucial in developing advanced materials. In this study, recycled crushed and expanded glasses are used as lightweight aggregates for concrete, and their relation to the material characteristics and properties is investigated using several approaches. Lightweight concrete specimens containing only crushed and expanded waste glass as fine aggregates are produced, and their pore and structural characteristics are examined using image-based methods, such as scanning electron microscopy (SEM), X-ray computed tomography (CT), and automated image analysis (RapidAir). The thermal properties of the materials are measured using both Hot Disk and ISOMET devices to enhance measurement accuracy. Mechanical properties are also evaluated, and the correlation between material characteristics and properties is evaluated. As a control group, a concrete specimen with natural fine sand is prepared, and its characteristics are compared with those of the specimens containing crushed and expanded waste glass aggregates. The obtained results support the usability of crushed and expanded waste glass aggregates as alternative lightweight aggregates.

  15. Evaluation of the Effects of Crushed and Expanded Waste Glass Aggregates on the Material Properties of Lightweight Concrete Using Image-Based Approaches

    Directory of Open Access Journals (Sweden)

    Sang-Yeop Chung

    2017-11-01

    Full Text Available Recently, the recycling of waste glass has become a worldwide issue in the reduction of waste and energy consumption. Waste glass can be utilized in construction materials, and understanding its effects on material properties is crucial in developing advanced materials. In this study, recycled crushed and expanded glasses are used as lightweight aggregates for concrete, and their relation to the material characteristics and properties is investigated using several approaches. Lightweight concrete specimens containing only crushed and expanded waste glass as fine aggregates are produced, and their pore and structural characteristics are examined using image-based methods, such as scanning electron microscopy (SEM, X-ray computed tomography (CT, and automated image analysis (RapidAir. The thermal properties of the materials are measured using both Hot Disk and ISOMET devices to enhance measurement accuracy. Mechanical properties are also evaluated, and the correlation between material characteristics and properties is evaluated. As a control group, a concrete specimen with natural fine sand is prepared, and its characteristics are compared with those of the specimens containing crushed and expanded waste glass aggregates. The obtained results support the usability of crushed and expanded waste glass aggregates as alternative lightweight aggregates.

  16. Determination of dispersity of crushed granite

    International Nuclear Information System (INIS)

    Liu Dejun; Fan Xianhua; Zhang Yingjie; Yao Jun; Zhou Duo; Wang Yong

    2004-01-01

    The experimental crushed granite column breakthrough curves, using 99 Tc as spike tracer and 3 H as invariant tracer, are analyzed by different linear regression techniques. Dispersity of crushed granite and retardation factor of 99 TcO 4 - on the crushed granite are determined simultaneously by one linear regression technique. Dispersity of crushed granite is also obtained with 3 H as invariant tracer by the other linear regression technique. The dispersities found by spike source and invariant source methods are compared. The experimental results show that the dispersity found by spike source method is close to that found by invariant source method. It indicates that dispersity is only the characteristic of dispersion medium

  17. Determination of dispersity of crushed granite

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    Experimental crushed granite column breakthrough curves, using 99 Tc as spike tracer and 3 H as invariant tracer, were analyzed by different linear regression techniques. Dispersity of crushed granite and the retardation factor of 99 TcO 4 - on the crushed granite were determined simultaneously by one linear regression. Dispersity of crushed granite was also obtained with 3 H as invariant tracer by the other linear regression. The dispersities found by spike source and invariant source methods are compared. Experimental results show that the dispersity found by the spike source method is close to that found by the invariant source method. This indicates that dispersity is only a characteristic of the dispersion medium. (author)

  18. Sugarcane outgrowers in Ethiopia

    DEFF Research Database (Denmark)

    Wendimu, Mengistu Assefa; Henningsen, Arne; Gibbon, Peter

    2016-01-01

    -users. Using data from the oldest and some more recently established sugarcane outgrower schemes in Ethiopia, this paper examines the effects of compulsory participation in sugarcane outgrower production on total household income and asset stocks. Because outgrowers and non-outgrowers may have some differences...

  19. Usage of Crushed Concrete Fines in Decorative Concrete

    Science.gov (United States)

    Pilipenko, Anton; Bazhenova, Sofia

    2017-10-01

    The article is devoted to the questions of usage of crushed concrete fines from concrete scrap for the production of high-quality decorative composite materials based on mixed binder. The main problem in the application of crushed concrete in the manufacture of decorative concrete products is extremely low decorative properties of crushed concrete fines itself, as well as concrete products based on them. However, crushed concrete fines could have a positive impact on the structure of the concrete matrix and could improve the environmental and economic characteristics of the concrete products. Dust fraction of crushed concrete fines contains non-hydrated cement grains, which can be opened in screening process due to the low strength of the contact zone between the hydrated and non-hydrated cement. In addition, the screening process could increase activity of the crushed concrete fines, so it can be used as a fine aggregate and filler for concrete mixes. Previous studies have shown that the effect of the usage of the crushed concrete fines is small and does not allow to obtain concrete products with high strength. However, it is possible to improve the efficiency of the crushed concrete fines as a filler due to the complex of measures prior to mixing. Such measures may include a preliminary mechanochemical activation of the binder (cement binder, iron oxide pigment, silica fume and crushed concrete fines), as well as the usage of polycarboxylate superplasticizers. The development of specific surface area of activated crushed concrete fines ensures strong adhesion between grains of binder and filler during the formation of cement stone matrix. The particle size distribution of the crushed concrete fines could achieve the densest structure of cement stone matrix and improve its resistance to environmental effects. The authors examined the mechanisms of structure of concrete products with crushed concrete fines as a filler. The results of studies of the properties of

  20. A numerical approach to model and predict the energy absorption and crush mechanics within a long-fiber composite crush tube

    Science.gov (United States)

    Pickett, Leon, Jr.

    Past research has conclusively shown that long fiber structural composites possess superior specific energy absorption characteristics as compared to steel and aluminum structures. However, destructive physical testing of composites is very costly and time consuming. As a result, numerical solutions are desirable as an alternative to experimental testing. Up until this point, very little numerical work has been successful in predicting the energy absorption of composite crush structures. This research investigates the ability to use commercially available numerical modeling tools to approximate the energy absorption capability of long-fiber composite crush tubes. This study is significant because it provides a preliminary analysis of the suitability of LS-DYNA to numerically characterize the crushing behavior of a dynamic axial impact crushing event. Composite crushing theory suggests that there are several crushing mechanisms occurring during a composite crush event. This research evaluates the capability and suitability of employing, LS-DYNA, to simulate the dynamic crush event of an E-glass/epoxy cylindrical tube. The model employed is the composite "progressive failure model", a much more limited failure model when compared to the experimental failure events which naturally occur. This numerical model employs (1) matrix cracking, (2) compression, and (3) fiber breakage failure modes only. The motivation for the work comes from the need to reduce the significant cost associated with experimental trials. This research chronicles some preliminary efforts to better understand the mechanics essential in pursuit of this goal. The immediate goal is to begin to provide deeper understanding of a composite crush event and ultimately create a viable alternative to destructive testing of composite crush tubes.

  1. Sugarcane bio ethanol and bioelectricity

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, Luiz Augusto Horta; Leal, Manoel Regis Lima Verde

    2012-07-01

    This chapter approaches the Brazilian sugar cane production and processing model, sugarcane processing, sugarcane reception, sugarcane preparation and juice extraction, juice treatment, fermentation, distillation, sector efficiencies and future improvement - 2007, 2015 and 2025, present situation (considering the 2007/2008 harvesting season), prospective values for 2015 and for 2025, bioelectricity generation, straw recovery, bagasse availability, energy balance, present situation, perspective for improvements in the GHG mitigation potential, bio ethanol production chain - from field to tank, and surplus electricity generation.

  2. Reuse of sand, crushed sugarcane and peanut hull-based substrates for cherry tomato cultivation Reutilização de substratos compostos por areia, bagaço de cana-de-açúcar e casca de amendoim no cultivo do tomateiro do grupo cereja

    Directory of Open Access Journals (Sweden)

    Carolina Fernandes

    2007-12-01

    Full Text Available The reuse of substrates for more than one growing season is an alternative to reduce production costs. The objective of this work was to evaluate the yield and quality fruits of the cherry tomato (Lycopersicon esculentum grown in reused substrates. The experimental design was a complete randomized block, with a factorial array of 7 × 2 (seven substrates and two growth periods, with four replications. The seven substrates consisted of different combinations of sand (S, crushed sugarcane (CS and peanut hull (PH. The substrates used were: S1 = S; S2 = [(2/3 S + (1/3 CS]; S3 = [(2/3 S + (1/3 PH]; S4 = [(2/3 S + (1/6 CS + (1/6 PH]; S5 = [(1/2 S + (1/2 CS]; S6 = [(1/2 S + (1/2 PH] and S7 = [(1/3 S + (1/3 CS + (1/3 PH]. These substrates were tested as new (one growth season, and reused (two sequentially growth seasons. The cherry tomato average yield was 9.07 kg m-2 when growth on the new substrates, and 8.44 kg m-2 when growth on the reused ones. The fruit quality was not affected by the reutilization of the substrates. The average values were 6.5 ºBrix for total soluble solids; 0.6 g for citric acid per 100 g for total titratable acidity and 4.2 for pH. A substrate consisting of equal parts of the three components can be recommended as a good growth medium for cherry tomato. All the substrates tested can be efficiently reused, at least once.A reutilização de substratos por mais de um cultivo é uma alternativa para reduzir os custos de produção. Objetivou-se assim avaliar a produtividade e a qualidade dos frutos do tomateiro (Lycopersicon esculentum do grupo cereja cultivado em substratos reutilizados. O delineamento experimental adotado foi o de blocos casualizados, com esquema fatorial 7 × 2 (sete substratos e duas utilizações dos substratos, em quatro repetições. Os substratos resultaram da combinação de diferentes proporções volumétricas de areia (A, bagaço de cana-de-açúcar (BC e casca de amendoim (CA. Testou-se: S1 = A; S2

  3. Technical viability of self-compacting concretes with by-products from crushed coarse aggregate production

    Directory of Open Access Journals (Sweden)

    Edgar Bacarji

    Full Text Available Abstract The main objective of this work is to present the technical viability of Self Compacting Concretes (SCC containing by-products from crushed coarse aggregate production. For this purpose, a vast characterization of these by-products was made; six mixtures of SCC were produced using two different aggregates: granite and mica schist. The binder/dry aggregate (b/agg ratio by mass was 1:3. The following properties were analyzed: compressive strength, direct tensile strength, flexural tensile strength and splitting tensile strength. Granite presented the best mechanical performance. The replacement of natural sand by granite sand generated concretes with the same level of compressive strength and caused an increase in tensile strength values. The incorporation of silica fume into concrete with granite produced an increase of 17% in compressive strength. So, the use of these by-product materials can provide a technically feasible solution that is also consistent with the aims of sustainable development and preservation of the environment.

  4. Characterizing large strain crush response of redwood

    International Nuclear Information System (INIS)

    Cramer, S.M.; Hermanson, J.C.

    1996-12-01

    Containers for the transportation of hazardous and radioactive materials incorporate redwood in impact limiters. Redwood is an excellent energy absorber, but only the most rudimentary information exists on its crush properties. The objectives of the study were to fill the information gap by collecting triaxial load-deformation data for redwood; to use these data to characterize redwood crush, assess current wood failure theories, provide developments toward a complete stress-strain theory for redwood; and to review the literature on strain-rate effects on redwood crush performance. The load-deformation responses of redwood at temperature conditions corresponding to ambient (70 degrees F), 150 degrees F, and -20 degrees F conditions were measured in approximately 100 confined compression tests for crush levels leading to material densification. Data analysis provided a more complete description of redwood crush performance and a basis for assessing proposed general orthotropic stress-strain relationships for redwood. A review of existing literature indicated that strain-rate effects cause at most a 20 percent increase in crush stress parallel to grain

  5. Sugarcane Elongin C is involved in infection by sugarcane mosaic disease pathogens.

    Science.gov (United States)

    Zhai, Yushan; Deng, Yuqing; Cheng, Guangyuan; Peng, Lei; Zheng, Yanru; Yang, Yongqing; Xu, Jingsheng

    2015-10-23

    Sugarcane (Saccharum sp. hybrid) provides the main source of sugar for humans. Sugarcane mosaic disease (SMD) is a major threat to sugarcane production. Currently, control of SMD is mainly dependent on breeding resistant cultivars through hybridization, which is time-consuming. Understanding the mechanism of viral infection may facilitate novel strategies to breed cultivars resistant to SMD and to control the disease. In this study, a wide interaction was detected between the viral VPg protein and host proteins. Several genes were screened from sugarcane cDNA library that could interact with Sugarcane streak mosaic virus VPg, including SceIF4E1 and ScELC. ScELC was predicted to be a cytoplasmic protein, but subcellular localization analysis showed it was distributed both in cytoplasmic and nuclear, and interactions were also detected between ScELC and VPg of SCMV or SrMV that reveal ScELC was widely used in the SMD pathogen infection process. ScELC and VPgs interacted in the nucleus, and may function to enhance the viral transcription rate. ScELC also interacted with SceIF4E2 both in the cytoplasm and nucleus, but not with SceIF4E1 and SceIF4E3. These results suggest that ScELC may be essential for the function of SceIF4E2, an isomer of eIF4E. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Crushed stone production plant for NPP building

    International Nuclear Information System (INIS)

    Obolenskij, V.Ya.

    1982-01-01

    The project of the granite-crushed stone quarry - the large modern plant producing building materials, is presented. The quarry is designated for providing NPP and other power objects building with high-strength crushed stone. The plant consists of: quarry; crushing-sorting plant with maintenance objects arranged on its ground; basis and service stores of explosive materials; tail facility and purifying systems; water supply purifying stations; water storage basin. The plant is reserved for 2335 thousand m 3 yearly utoput of crushed stone; the staff consists of 535 persons, the budgeted cost of building is 26.6 million rubles. Physicochemical characteristics of granosyenites of the ''Granitnoye'' deposit - the raw material resource base of the plant and technological scheme of the crushing-sorting plant are given. Planned measures on building organization and recultivation of disturbed grounds are presented

  7. Greenhouse Gas Emissions from Brazilian Sugarcane Soils

    Science.gov (United States)

    Carmo, J.; Pitombo, L.; Cantarella, H.; Rosseto, R.; Andrade, C.; Martinelli, L.; Gava, G.; Vargas, V.; Sousa-Neto, E.; Zotelli, L.; Filoso, S.; Neto, A. E.

    2012-04-01

    Bioethanol from sugarcane is increasingly seen as a sustainable alternative energy source. Besides having high photosynthetic efficiency, sugarcane is a perennial tropical grass crop that can re-grow up to five or more years after being planted. Brazil is the largest producer of sugarcane in the world and management practices commonly used in the country lead to lower rates of inorganic N fertilizer application than sugarcane grown elsewhere, or in comparison to other feedstocks such as corn. Therefore, Brazilian sugarcane ethanol potentially promotes greenhouse gas savings. For that reason, several recent studies have attempted to assess emissions of greenhouse gases (GHG) during sugarcane production in the tropics. However, estimates have been mainly based on models due to a general lack of field data. In this study, we present data from in situ experiments on emission of three GHG (CO2, N2O, and CH4) in sugarcane fields in Brazil. Emissions are provided for sugarcane in different phases of the crop life cycle and under different management practices. Our results show that the use of nitrogen fertilizer in sugarcane crops resulted in an emission factor for N2O similar to those predicted by IPCC (1%), ranging from 0.59% in ratoon cane to 1.11% in plant cane. However, when vinasse was applied in addition to mineralN fertilizer, emissions of GHG increased in comparison to those from the use of mineral N fertilizer alone. Emissions increased significantly when experiments mimicked the accumulation of cane trash on the soil surface with 14 tons ha-1and 21 tons ha-1, which emission factor were 1.89% and 3.03%, respectively. This study is representative of Brazilian sugarcane systems under specific conditions for key factors affecting GHG emissions from soils. Nevertheless, the data provided will improve estimates of GHG from Brazilian sugarcane, and efforts to assess sugarcane ethanol sustainability and energy balance. Funding provided by the São Paulo Research

  8. Migration behavior and sorption mechanisms of radionuclides in sedimentary sand stones

    International Nuclear Information System (INIS)

    Tanaka, Tadao; Kamiyama, Hideo; Sriyotha, K.

    1993-05-01

    The influence of crushed particle size and weathering of sedimentary rock on migration behavior and sorption mechanisms of 60 Co, 85 Sr and 137 Cs has been investigated by using the fresh sand stones (classified into two particle size ranges of 1 ∼ 3 mm and 2 , KCl, NH 2 OH-HCl, K-oxalate and H 2 O 2 solutions were carried out, to elucidate their dominated sorption mechanisms. Distribution coefficient values of the all three radionuclides, Kds, for the sand stone of 1 ∼ 3 mm was smaller than that of 85 Sr, and the same irreversible sorptions as the selective sorption of Co onto manganese oxides and fixation of Cs by the layer silicate for 60 Co and 137 Cs, respectively. Larger sorbability of the weathered sand stone was explained to be related to an increase of amounts of the effective sorption site, such as cation exchangeable site, calcite, smectite and manganese oxides, which was possibly caused from metamorphism induced by weathering the fresh sand stone. (author)

  9. Power plant perspectives for sugarcane mills

    International Nuclear Information System (INIS)

    Bocci, E.; Di Carlo, A.; Marcelo, D.

    2009-01-01

    Biomass, integral to life, is one of the main energy sources that modern technologies could widely develop, overcoming inefficient and pollutant uses. The sugarcane bagasse is one of the more abundant biomass. Moreover, the fluctuating sugar and energy prices force the sugarcane companies to implement improved power plants. Thanks to a multiyear collaboration between University of Rome and University of Piura and Chiclayo, this paper investigates, starting from the real data of an old sugarcane plant, the energy efficiency of the plant. Furthermore, it explores possible improvements as higher temperature and pressure Rankine cycles and innovative configurations based on gasifier plus hot gas conditioning and gas turbine or molten carbonate fuel cells. Even if the process of sugar extraction from sugarcane and the relative Rankine cycles power plants are well documented in literature, this paper shows that innovative power plant configurations can increase the bagasse-based cogeneration potential. Sugarcane companies can become electricity producers, having convenience in the use of sugarcane leaves and trash (when it is feasible). The worldwide implementation of advanced power plants, answering to a market competition, will improve significantly the renewable electricity produced, reducing CO 2 emissions, and increasing economic and social benefits.

  10. An Investigation into the Use of Manufactured Sand as a 100% Replacement for Fine Aggregate in Concrete

    Directory of Open Access Journals (Sweden)

    Martins Pilegis

    2016-06-01

    Full Text Available Manufactured sand differs from natural sea and river dredged sand in its physical and mineralogical properties. These can be both beneficial and detrimental to the fresh and hardened properties of concrete. This paper presents the results of a laboratory study in which manufactured sand produced in an industry sized crushing plant was characterised with respect to its physical and mineralogical properties. The influence of these characteristics on concrete workability and strength, when manufactured sand completely replaced natural sand in concrete, was investigated and modelled using artificial neural networks (ANN. The results show that the manufactured sand concrete made in this study generally requires a higher water/cement (w/c ratio for workability equal to that of natural sand concrete due to the higher angularity of the manufactured sand particles. Water reducing admixtures can be used to compensate for this if the manufactured sand does not contain clay particles. At the same w/c ratio, the compressive and flexural strength of manufactured sand concrete exceeds that of natural sand concrete. ANN proved a valuable and reliable method of predicting concrete strength and workability based on the properties of the fine aggregate (FA and the concrete mix composition.

  11. An Investigation into the Use of Manufactured Sand as a 100% Replacement for Fine Aggregate in Concrete.

    Science.gov (United States)

    Pilegis, Martins; Gardner, Diane; Lark, Robert

    2016-06-02

    Manufactured sand differs from natural sea and river dredged sand in its physical and mineralogical properties. These can be both beneficial and detrimental to the fresh and hardened properties of concrete. This paper presents the results of a laboratory study in which manufactured sand produced in an industry sized crushing plant was characterised with respect to its physical and mineralogical properties. The influence of these characteristics on concrete workability and strength, when manufactured sand completely replaced natural sand in concrete, was investigated and modelled using artificial neural networks (ANN). The results show that the manufactured sand concrete made in this study generally requires a higher water/cement (w/c) ratio for workability equal to that of natural sand concrete due to the higher angularity of the manufactured sand particles. Water reducing admixtures can be used to compensate for this if the manufactured sand does not contain clay particles. At the same w/c ratio, the compressive and flexural strength of manufactured sand concrete exceeds that of natural sand concrete. ANN proved a valuable and reliable method of predicting concrete strength and workability based on the properties of the fine aggregate (FA) and the concrete mix composition.

  12. The Suitability Of Local Quartz Sand In The Production Of Bath Crucibles.

    Directory of Open Access Journals (Sweden)

    C. O. Okpanachi

    2017-03-01

    Full Text Available The suitability of local quartz sand in the production of bath crucibles is a study that was carried out in order to impart overall strength on bath crucibles hence reduce breakages during fettling. Therefore this research constitutes a study to enhance the efficiency of production of bath crucibles by addition of quartz sand in slip preparation. The steps taken in the beneficiation of quartz sand for the production of bath crucibles are comminution which entails crushing and milling classification washing liquid dispersion sizing and reduction of iron content by magnetic separation. The slip contains materials like plastic clay feldspar kaolin talc sodium silicate water quartz sand etc. These were all milled in the ball mill for slip production casting and fettling glazing and sintering to get final bath crucibles as the end products. Quartz sand is used in a variety of products essentially as raw material for the foundry casting and glass industries and also in chemicals water filtration and ceramics the heat resistance nature of quartz sand makes it an excellent refractory substance for these industrial processes. Slip can be prepared for production of bath crucibles without the inclusion of quartz sand however the addition of quartz sand is needed to improve the mechanical performance of the slip in the production of bath crucibles.

  13. Sugarcane Elongin C is involved in infection by sugarcane mosaic disease pathogens

    Energy Technology Data Exchange (ETDEWEB)

    Zhai, Yushan; Deng, Yuqing; Cheng, Guangyuan; Peng, Lei; Zheng, Yanru; Yang, Yongqing, E-mail: yyq287346@163.com; Xu, Jingsheng, E-mail: xujingsheng@126.com

    2015-10-23

    Sugarcane (Saccharum sp. hybrid) provides the main source of sugar for humans. Sugarcane mosaic disease (SMD) is a major threat to sugarcane production. Currently, control of SMD is mainly dependent on breeding resistant cultivars through hybridization, which is time-consuming. Understanding the mechanism of viral infection may facilitate novel strategies to breed cultivars resistant to SMD and to control the disease. In this study, a wide interaction was detected between the viral VPg protein and host proteins. Several genes were screened from sugarcane cDNA library that could interact with Sugarcane streak mosaic virus VPg, including SceIF4E1 and ScELC. ScELC was predicted to be a cytoplasmic protein, but subcellular localization analysis showed it was distributed both in cytoplasmic and nuclear, and interactions were also detected between ScELC and VPg of SCMV or SrMV that reveal ScELC was widely used in the SMD pathogen infection process. ScELC and VPgs interacted in the nucleus, and may function to enhance the viral transcription rate. ScELC also interacted with SceIF4E2 both in the cytoplasm and nucleus, but not with SceIF4E1 and SceIF4E3. These results suggest that ScELC may be essential for the function of SceIF4E2, an isomer of eIF4E. - Highlights: • We cloned ScELC, SceIF4E1, SceIF4E2 and SceIF4E3 from sugarcane accession Badila. • We examined interactions among VPg, ScELC, SceIF4E1, SceIF4E2 and SceIF4E3. • We proofed that ScELC interacted with VPgs of SCMV, SrMV and SCSMV. • We proofed that ScELC interacted with SceIF4E2 but not SceIF4E1 or SceIF4E3.

  14. Sugarcane Elongin C is involved in infection by sugarcane mosaic disease pathogens

    International Nuclear Information System (INIS)

    Zhai, Yushan; Deng, Yuqing; Cheng, Guangyuan; Peng, Lei; Zheng, Yanru; Yang, Yongqing; Xu, Jingsheng

    2015-01-01

    Sugarcane (Saccharum sp. hybrid) provides the main source of sugar for humans. Sugarcane mosaic disease (SMD) is a major threat to sugarcane production. Currently, control of SMD is mainly dependent on breeding resistant cultivars through hybridization, which is time-consuming. Understanding the mechanism of viral infection may facilitate novel strategies to breed cultivars resistant to SMD and to control the disease. In this study, a wide interaction was detected between the viral VPg protein and host proteins. Several genes were screened from sugarcane cDNA library that could interact with Sugarcane streak mosaic virus VPg, including SceIF4E1 and ScELC. ScELC was predicted to be a cytoplasmic protein, but subcellular localization analysis showed it was distributed both in cytoplasmic and nuclear, and interactions were also detected between ScELC and VPg of SCMV or SrMV that reveal ScELC was widely used in the SMD pathogen infection process. ScELC and VPgs interacted in the nucleus, and may function to enhance the viral transcription rate. ScELC also interacted with SceIF4E2 both in the cytoplasm and nucleus, but not with SceIF4E1 and SceIF4E3. These results suggest that ScELC may be essential for the function of SceIF4E2, an isomer of eIF4E. - Highlights: • We cloned ScELC, SceIF4E1, SceIF4E2 and SceIF4E3 from sugarcane accession Badila. • We examined interactions among VPg, ScELC, SceIF4E1, SceIF4E2 and SceIF4E3. • We proofed that ScELC interacted with VPgs of SCMV, SrMV and SCSMV. • We proofed that ScELC interacted with SceIF4E2 but not SceIF4E1 or SceIF4E3.

  15. Kenaf and cowpea as sugarcane cover crops

    Science.gov (United States)

    The use of cover crops during the fallow period prior to planting sugarcane has the potential to influence not only the following sugarcane crop, but the economics of the production system as a whole. Typically, a Louisiana sugarcane field is replanted every four years due to declining yields, and,...

  16. Sugarcane for Bioethanol: Soil and Environmental Issues

    NARCIS (Netherlands)

    Hartemink, A.E.

    2008-01-01

    Cultivation of sugarcane for bioethanol is increasing and the area under sugarcane is expanding. Much of the sugar for bioethanol comes from large plantations where it is grown with relatively high inputs. Sugarcane puts a high demands on the soil because of the use of heavy machinery and because

  17. Sugarcane genes related to mitochondrial function

    Directory of Open Access Journals (Sweden)

    Fonseca Ghislaine V.

    2001-01-01

    Full Text Available Mitochondria function as metabolic powerhouses by generating energy through oxidative phosphorylation and have become the focus of renewed interest due to progress in understanding the subtleties of their biogenesis and the discovery of the important roles which these organelles play in senescence, cell death and the assembly of iron-sulfur (Fe/S centers. Using proteins from the yeast Saccharomyces cerevisiae, Homo sapiens and Arabidopsis thaliana we searched the sugarcane expressed sequence tag (SUCEST database for the presence of expressed sequence tags (ESTs with similarity to nuclear genes related to mitochondrial functions. Starting with 869 protein sequences, we searched for sugarcane EST counterparts to these proteins using the basic local alignment search tool TBLASTN similarity searching program run against 260,781 sugarcane ESTs contained in 81,223 clusters. We were able to recover 367 clusters likely to represent sugarcane orthologues of the corresponding genes from S. cerevisiae, H. sapiens and A. thaliana with E-value <= 10-10. Gene products belonging to all functional categories related to mitochondrial functions were found and this allowed us to produce an overview of the nuclear genes required for sugarcane mitochondrial biogenesis and function as well as providing a starting point for detailed analysis of sugarcane gene structure and physiology.

  18. Sugarcane energy use: The Cuban case

    Energy Technology Data Exchange (ETDEWEB)

    Alonso-Pippo, Walfrido; Luengo, Carlos A. [Grupo Combustiveis Alternativos, DFA/IFGW/UNICAMP, CP 6165, CEP 13083-970 Campinas, Sao Paulo (Brazil); Koehlinger, John [Energy Consultant. 1322 Hepburn Ave 1, Louisville, KY 40204 (United States); Garzone, Pietro; Cornacchia, Giacinto [ENEA Trisaia Research Centre. Prot-STP. SS106 Jonica, Rotondella (Italy)

    2008-06-15

    This paper examines the history, methods, costs, and future prospects of Cuba's attempts to develop the energy potential of sugarcane. An overview of the main factors affecting the current sugarcane agro-industry in Cuba is provided, along with an analysis of why, despite attempts by the Cuban government to revive the country's sugarcane agro-industry, the industry continues to decline. The prevailing conditions and degree of modernization in Cuban sugar factories are evaluated. The sugar-agro industry's main production bottlenecks are studied. The fall in sugarcane yield from 57.5 ton/ha in 1991 to 22.4 ton/ha in 2005 and its relation to land use is explained. The socio-economic impact of the sugarcane agro-industry's downsizing is assessed. The governmental and quasi-governmental entities in charge of sugarcane energy use development and the country's legal framework are analyzed. The Cuban sugarcane agro-industry's opportunities in the growing international biofuels and bioenergy market are evaluated. To situate Cuba within the global bioenergy market, international best practices relating to the production and commercialization of biofuels are examined to determine the degree to which these experiences can be transferred to Cuba. The analysis of the Cuba sugar industry's biofuel potential is based on a comparative technical-economic assessment of three possible production scenarios: (1) the current situation, where only sugar is produced; (2) simultaneous production of sugar-anhydrous ethanol; and (3) production of sugar-ethanol and simultaneous generation of surplus electricity exported to a public grid. Some of the key assumptions underlying these analyses are as follows: Ethanol production and operation costs for a 7000 ton/day-sugar mill are estimated to be 0.25 and 0.23 USD/l, respectively. The influence of gasoline prices on sugar-ethanol production is also assessed. The kWh production and operation costs starting from

  19. Sugarcane energy use: The Cuban case

    International Nuclear Information System (INIS)

    Alonso-Pippo, Walfrido; Luengo, Carlos A.; Koehlinger, John; Garzone, Pietro; Cornacchia, Giacinto

    2008-01-01

    This paper examines the history, methods, costs, and future prospects of Cuba's attempts to develop the energy potential of sugarcane. An overview of the main factors affecting the current sugarcane agro-industry in Cuba is provided, along with an analysis of why, despite attempts by the Cuban government to revive the country's sugarcane agro-industry, the industry continues to decline. The prevailing conditions and degree of modernization in Cuban sugar factories are evaluated. The sugar-agro industry's main production bottlenecks are studied. The fall in sugarcane yield from 57.5 ton/ha in 1991 to 22.4 ton/ha in 2005 and its relation to land use is explained. The socio-economic impact of the sugarcane agro-industry's downsizing is assessed. The governmental and quasi-governmental entities in charge of sugarcane energy use development and the country's legal framework are analyzed. The Cuban sugarcane agro-industry's opportunities in the growing international biofuels and bioenergy market are evaluated. To situate Cuba within the global bioenergy market, international best practices relating to the production and commercialization of biofuels are examined to determine the degree to which these experiences can be transferred to Cuba. The analysis of the Cuba sugar industry's biofuel potential is based on a comparative technical-economic assessment of three possible production scenarios: (1) the current situation, where only sugar is produced; (2) simultaneous production of sugar-anhydrous ethanol; and (3) production of sugar-ethanol and simultaneous generation of surplus electricity exported to a public grid. Some of the key assumptions underlying these analyses are as follows: Ethanol production and operation costs for a 7000 ton/day-sugar mill are estimated to be 0.25 and 0.23 USD/l, respectively. The influence of gasoline prices on sugar-ethanol production is also assessed. The kWh production and operation costs starting from sugarcane bagasse are estimated at 0

  20. Crushing of ship bows in head-on collision

    DEFF Research Database (Denmark)

    Ocakli, H.; Zhang, S.; Pedersen, Preben Terndrup

    2004-01-01

    Semi-analytical methods for analysis of plate crushing and ship bow damage in head-on collisions are developed in this paper. Existing experimental and theoretical studies for crushing analysis of plated structures are summarized and compared. Simple formulae for determining the crushing force....... The approach developed can be used easily to determine the crushing resistance and damage extent of the ship bow when ship length and collision speed are known. The method can be used in probabilistic analysis of damage extents in ship collisions where a large number of calculations are generally required....

  1. Crushed Stone Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes crushed stone operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  2. Soil uses during the sugarcane fallow period: influence on soil chemical and physical properties and on sugarcane productivity

    Directory of Open Access Journals (Sweden)

    Roniram Pereira da Silva

    2014-04-01

    Full Text Available The planting of diversified crops during the sugarcane fallow period can improve the chemical and physical properties and increase the production potential of the soil for the next sugarcane cycle. The primary purpose of this study was to assess the influence of various soil uses during the sugarcane fallow period on soil chemical and physical properties and productivity after the first sugarcane harvest. The experiment was conducted in two areas located in Jaboticabal, São Paulo State, Brazil (21º 14' 05'' S, 48º 17' 09'' W with two different soil types, namely: an eutroferric Red Latosol (RLe with high-clay texture (clay content = 680 g kg-1 and an acric Red Latosol (RLa with clayey texture (clay content = 440 g kg-1. A randomized block design with five replications and four treatments (crop sequences was used. The crop sequences during the sugarcane fallow period were soybean/millet/soybean, soybean/sunn hemp/soybean, soybean/fallow/soybean, and soybean. Soil use was found not to affect chemical properties and sugarcane productivity of RLe or RLa. The soybean/millet/soybean sequence improved aggregation in the acric Latosol.

  3. Study comparing the double kissing (DK) crush with classical crush for the treatment of coronary bifurcation lesions: the DKCRUSH-1 Bifurcation Study with drug-eluting stents.

    Science.gov (United States)

    Chen, S L; Zhang, J J; Ye, F; Chen, Y D; Patel, T; Kawajiri, K; Lee, M; Kwan, T W; Mintz, G; Tan, H C

    2008-06-01

    Classical crush has a lower rate of final kissing balloon inflation (FKBI) immediately after percutaneous coronary intervention (PCI). The double kissing (DK) crush technique has the potential to increase the FKBI rate, and no prospective studies on the comparison of classical with DK crush techniques have been reported. Three hundred and eleven patients with true bifurcation lesions were randomly divided into classical (n = 156) and DK crush (n = 155) groups. Clinical and angiographic details at follow-up at 8 months were indexed. The primary end point was major adverse cardiac events (MACE) including myocardial infarction, cardiac death and target lesion revascularization (TLR) at 8 months. FKBI was 76% in the classical crush group and 100% in the DK group (P DK crush group. Cumulative 8 month MACE was 24.4% in the classical crush group and 11.4% in the DK crush group (P = 0.02). The TLR-free survival rate was 75.4% in the classical crush group and 89.5% in the DK crush group (P = 0.002). DK crush technique has the potential of increasing FKBI rate and reducing stent thrombosis, with a further reduction of TLR and cumulative MACE rate at 8 months.

  4. The Brazilian sugarcane innovation system

    International Nuclear Information System (INIS)

    Tosi Furtado, Andre; Gaya Scandiffio, Mirna Ivonne; Barbosa Cortez, Luis Augusto

    2011-01-01

    Ethanol has recently been of great interest worldwide because it is a viable economic alternative to petroleum products and it is a renewable source of energy that mitigates the emission of greenhouse gases. Brazilian bioethanol from sugarcane is the most successful case at the world level because of its low cost and low level of greenhouse gas emissions. Brazil's success with sugarcane cannot be understood as based solely on a natural comparative advantage, but as a result of efforts that culminated in a positive trajectory of technological learning, relying mostly on incremental innovations. The purpose of this article is to analyze the key aspects of the innovation system built around the Brazilian sugarcane industry. It is based on the national innovation systems approach according to which innovation results from the interaction of different institutional actors. Institutional arrangements are analyzed as the basis for the innovative process, in particular R and D and the innovation policies and strategies of the main players in the sugarcane sector, including sugar and ethanol mills, industrial goods suppliers, public and private research institutions, and governmental agencies. - Research Highlights: → The Brazilian success in bioethanol is due to the sugarcane innovation system. → Private funds for R and D became central after IAA closure. → Nowadays Brazilian innovation system is transforming to keep its leadership. → Public funds for research in the second generation bioethanol.

  5. Fugitive emissions control on dry copper tailing with crushed rock armor

    International Nuclear Information System (INIS)

    Haase, E.F.

    1992-01-01

    Four inactive copper tailing impoundments totalling 1,900 acres near Ajo in southwestern Arizona were covered on horizontal surfaces with a 2 in. nominal thickness of crushed rock to control particulate emissions. The tailings are typically dominated by sand-sized particles but may also include significant PM 10 fractions towards the centers of the impoundments. The technology was selected by Phelps Dodge Corporation, after investigation of several alternatives, as a permanent and practical cover that essentially eliminates fugitive emissions. It simulates the natural desert pavement that characterizes this arid area of the Sonoran Desert. Rocky overburden was crushed to minus 3 in. diameter and broadcast on dry surfaces of tailing impoundments with all-terrain, balloon-tired spreaders. Stony residues in the rock armor tend to cement together following rainfall, forming a crust that enhances surface stability and erosion control. Slopes with windblown tailing deposition were covered to a nominal 6 in. thickness by conventional dozer pushing and blading of minus 10 in. rock over the sides. Athel trees, planted extensively since 1970 on two of the four inactive impoundments, provided partial control of fugitives, but were subjected to harsh environmental conditions, including abrasion from saltating particles. The rock armor functions as a mulch which is expected to improve water relations for existing vegetation and areas seeded with native species. New surface microenvironments, and the virtual elimination of surface creep and saltation, are expected to support native plant growth under favorable climatic conditions

  6. Effect of sugarcane waste in the control of interrill erosion

    Directory of Open Access Journals (Sweden)

    Wander Cardoso Valim

    2016-06-01

    Full Text Available The cultivation of sugarcane uses different cropping systems that result in varying quantities of crop waste, this may influence soil erosion. The objective of this study was to evaluate the loss of soil and water, the infiltration rate, and soil surface roughness in an area cultivated with sugarcane (Saccharum spp.. Six treatments with different levels of plant waste were evaluated: sugarcane without plant waste; sugarcane with 4.0 Mg ha-1 of waste; sugarcane with 8.0 Mg ha-1 of waste; sugarcane with 12.0 Mg ha-1 of waste; sugarcane with 16.0 Mg ha-1 of waste; and burned sugarcane. The treatments were arranged in a randomized block design with four replications, totalling 24 experimental plots. As soil depth increased, there is reduction in macroporosity, total soil porosity, organic carbon content, mean geometric diameter and weighted mean diameter of the soil aggregates, whereas the bulk density of the soil displays the opposite trend. The presence of sugarcane waste on the soil surface increases the time required for the initiation of surface runoff. Sugarcane waste does not alter soil surface roughness, and at the minimum amount of waste administered (4 Mg ha-1 reduces losses of soil and water and increases the infiltration rate. The lack of soil surface coverage after harvesting the sugarcane contributes to soil and water loss, and reduces the rate of stable infiltration of water into the soil.

  7. The sustainability of ethanol production from sugarcane

    International Nuclear Information System (INIS)

    Goldemberg, Jose; Coelho, Suani Teixeira; Guardabassi, Patricia

    2008-01-01

    The rapid expansion of ethanol production from sugarcane in Brazil has raised a number of questions regarding its negative consequences and sustainability. Positive impacts are the elimination of lead compounds from gasoline and the reduction of noxious emissions. There is also the reduction of CO 2 emissions, since sugarcane ethanol requires only a small amount of fossil fuels for its production, being thus a renewable fuel. These positive impacts are particularly noticeable in the air quality improvement of metropolitan areas but also in rural areas where mechanized harvesting of green cane is being introduced, eliminating the burning of sugarcane. Negative impacts such as future large-scale ethanol production from sugarcane might lead to the destruction or damage of high-biodiversity areas, deforestation, degradation or damaging of soils through the use of chemicals and soil decarbonization, water resources contamination or depletion, competition between food and fuel production decreasing food security and a worsening of labor conditions on the fields. These questions are discussed here, with the purpose of clarifying the sustainability aspects of ethanol production from sugarcane mainly in Sao Paulo State, where more than 60% of Brazil's sugarcane plantations are located and are responsible for 62% of ethanol production. (author)

  8. Phytochemical profile of sugarcane and its potential health aspects.

    Science.gov (United States)

    Singh, Amandeep; Lal, Uma Ranjan; Mukhtar, Hayat Muhammad; Singh, Prabh Simran; Shah, Gagan; Dhawan, Ravi Kumar

    2015-01-01

    Sugarcane (Saccharum officinarum Linn.) is an important perennial grass of Poaceae family, indigenous to tropical South Asia and Southeast Asia. It is cultivated worldwide due to the economical and medicinal value of its high yielding products. Sugarcane juice is well known as a raw material for the production of refined sugar and its wax is considered as a potential substitute for the expensive carnauba wax, which is of cosmetic and pharmaceutical interest. Refined sugar is the primary product of sugarcane juice, but during its processing, various other valuable products are also obtained in an unrefined form, such as, brown sugar, molasses, and jaggery. Sugarcane juice is widely used in India in the treatment of jaundice, hemorrhage, dysuria, anuria, and other urinary diseases. Herein, we have summarized the different phytoconstituents and health benefits of sugarcane and its valuable products. The phytochemistry of sugarcane wax (obtained from the leaves and stalks of sugarcane), leaves, juice, and its products has revealed the presence of various fatty acid, alcohol, phytosterols, higher terpenoids, flavonoids, -O- and -C-glycosides, and phenolic acids. The future prospective of some of the sugarcane products has been discussed, which needs a phytopharmacological study and has a great potential to be a valuable medicinal product.

  9. Screening for Sugarcane Brown Rust in the First Clonal Stage of the Canal Point Sugarcane Breeding Program

    Directory of Open Access Journals (Sweden)

    Duli Zhao

    2015-07-01

    Full Text Available Sugarcane (Saccharum spp. brown rust (caused by Puccinia melanocephala Syd. & P. Syd. was first reported in the United States in 1978 and is still one of the great challenges for sugarcane production. A better understanding of sugarcane genotypic variation in response to brown rust will help optimize breeding and selection strategies for disease resistance. Brown rust ratings were scaled from non-infection (0 to severe infection (4 with intervals of 0.5 and routinely recorded for genotypes in the first clonal selection stage of the Canal Point sugarcane breeding program in Florida. Data were collected from 14,272 and 12,661 genotypes and replicated check cultivars in 2012 and 2013, respectively. Mean rust rating, % infection, and severity in each family and progeny of female parent were determined, and their coefficients of variation (CV within and among families (females were estimated. Considerable variation exists in rust ratings among families or females. The families and female parents with high susceptibility or resistance to brown rust were identified and ranked. The findings of this study can help scientists to evaluate sugarcane crosses and parents for brown rust disease, to use desirable parents for crossing, and to improve genetic resistance to brown rust in breeding programs.

  10. Functionally relevant microsatellites in sugarcane unigenes

    Directory of Open Access Journals (Sweden)

    Singh Nagendra K

    2010-11-01

    Full Text Available Abstract Background Unigene sequences constitute a rich source of functionally relevant microsatellites. The present study was undertaken to mine the microsatellites in the available unigene sequences of sugarcane for understanding their constitution in the expressed genic component of its complex polyploid/aneuploid genome, assessing their functional significance in silico, determining the extent of allelic diversity at the microsatellite loci and for evaluating their utility in large-scale genotyping applications in sugarcane. Results The average frequency of perfect microsatellite was 1/10.9 kb, while it was 1/44.3 kb for the long and hypervariable class I repeats. GC-rich trinucleotides coding for alanine and the GA-rich dinucleotides were the most abundant microsatellite classes. Out of 15,594 unigenes mined in the study, 767 contained microsatellite repeats and for 672 of these putative functions were determined in silico. The microsatellite repeats were found in the functional domains of proteins encoded by 364 unigenes. Its significance was assessed by establishing the structure-function relationship for the beta-amylase and protein kinase encoding unigenes having repeats in the catalytic domains. A total of 726 allelic variants (7.42 alleles per locus with different repeat lengths were captured precisely for a set of 47 fluorescent dye labeled primers in 36 sugarcane genotypes and five cereal species using the automated fragment analysis system, which suggested the utility of designed primers for rapid, large-scale and high-throughput genotyping applications in sugarcane. Pair-wise similarity ranging from 0.33 to 0.84 with an average of 0.40 revealed a broad genetic base of the Indian varieties in respect of functionally relevant regions of the large and complex sugarcane genome. Conclusion Microsatellite repeats were present in 4.92% of sugarcane unigenes, for most (87.6% of which functions were determined in silico. High level of

  11. Genetic Divergence in Sugarcane Genotypes

    OpenAIRE

    Tahir, Mohammad; Rahman, Hidayatur; Gul, Rahmani; Ali, Amjad; Khalid, Muhammad

    2012-01-01

    To assess genetic divergence of sugarcane germplasm, an experiment comprising 25 sugarcane genotypes was conducted at Sugar Crops Research Institute (SCRI), Mardan, Khyber Pakhtunkhwa, Pakistan, in quadruple lattice design during 2008-09. Among the 14 parameters evaluated, majority exhibited significant differences while some showed nonsignificant mean squares. The initial correlation matrix revealed medium to high correlations. Principal Component Analysis (PCA) showed that there were two pr...

  12. Concentration on Callus Induction in Sugarcane

    African Journals Online (AJOL)

    protocols for in vitro micro propagation of sugarcane through callus culture from foliage leaves (Bugun et al., ... protocol for specific genotypes. Sucrose is the most important type of sugar produced from sugarcane. ... laboratories via plant tissue culture technique. (Lorenzo and Ganzalez, 1998). This allows for an extended ...

  13. Short-term effects of sugarcane waste products from ethanol production plant as soil amendments on sugarcane growth and metal stabilization.

    Science.gov (United States)

    Akkajit, Pensiri; DeSutter, Thomas; Tongcumpou, Chantra

    2013-05-01

    Numerous waste products have been widely studied and used as soil amendments and metal immobilizing agents. Waste utilization from ethanol production processes as soil amendments is one of the most promising and sustainable options to help utilize materials effectively, reduce waste disposal, and add value to byproducts. As a consequence, this present work carried out a four-month pot experiment of sugarcane (Saccharum officinarum L.) cultivation in Cd and Zn contaminated soil to determine the effect of three sugarcane waste products (boiler ash, filter cake and vinasse) as soil amendment on sugarcane growth, metal translocation and accumulation in sugarcane, and fractionation of Cd and Zn in soil by the BCR sequential extraction. Four treatments were tested: (1) non-amended soil; (2) 3% w/w boiler ash; (3) 3% w/w filter cake; and (4) a combination of 1.5% boiler ash and 1.5% vinasse (w/w). Our findings showed the improved biomass production of sugarcanes; 6 and 3-fold higher for the above ground parts (from 8.5 to 57.6 g per plant) and root (from 2.1 to 6.59 g per plant), respectively, as compared to non-amended soil. Although there was no significant difference in Cd and Zn uptake in sugarcane (mg kg(-1)) between the non-amended soil and the treated soils (0.44 to 0.52 mg Cd kg(-1) and 39.9 to 48.1 mg Zn kg(-1), respectively), the reduction of the most bioavailable Cd concentration (BCR1 + 2) in the treated soils (35.4-54.5%) and the transformation of metal into an insoluble fraction (BCR3) highlighted the beneficial effects of sugarcane waste-products in promoting the sugarcane growth and Cd stabilization in soil.

  14. Identification of virus isolates inducing mosaic of sugarcane in ...

    African Journals Online (AJOL)

    Sugarcane mosaic disease caused by sugarcane mosaic virus (SCMV), Johnsongrass mosaic virus (JGMV), maize dwarf mosaic virus (MDMV) and sorghum mosaic Virus (SrMV) is an economically important viral disease of sugarcane worldwide. Field survey was conducted to assess the presence of the viruses involve in ...

  15. Disease resistance in sugarcane – An overview

    Directory of Open Access Journals (Sweden)

    A. Ramesh Sundar

    2015-12-01

    Full Text Available Sugarcane is one of the important commercial crops cultivated world-wide both under tropical and sub-tropical conditions. The crop gains economic importance by virtue of its industrial potential in terms of products like crystal white sugar, bagasse, pressmud, power etc. Among the various production constraints of the crop, diseases are seen as a major threat for sustaining the productivity of sugarcane. Conventional Breeding is a lengthy process and it involves almost more than 10 years for the release of a commercial variety. Many varieties with superior agronomical traits have succumbed to diseases like red rot and smut during the course of cultivation, which hitherto at the time of release were rated to be resistant. The breakdown of disease resistance is attributed to the possible emergence of new virulent pathotypes. This situation has warranted a pertinent need to have a thorough understanding on inheritance pattern and mechanism of disease resistance in sugarcane, which would aid for quick screening of disease resistant clones and successful management of the diseases, respectively. Overall, there is a paradigm shift in the understanding of plant disease resistance, thanks to the advent of robust molecular tools. An integration of the tools of “Omics” namely genomics, proteomics, metabolomics etc. has further strengthened in deciphering plant-pathogen interactions at the molecular level. With the accomplishments in elucidating sugarcane ESTs, which was ably supported by employing the next generation sequencing platforms to unlock the secrets of pathogenomics in sugarcane, it is now made possible to further improve our understanding on disease resistance in sugarcane. Giving the scenario, the future looks evenmore promising, wherein convincing results are in the offing to thoroughly unravel the enigmatic relationship between sugarcane and its important pathogens.

  16. 27 CFR 24.176 - Crushing and fermentation.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Crushing and fermentation..., DEPARTMENT OF THE TREASURY LIQUORS WINE Production of Wine § 24.176 Crushing and fermentation. (a) Natural... fermentation but the density of the juice may not be reduced below 22 degrees Brix. However, if the juice is...

  17. [Comparison of DK crush with classical crush technique with drug-eluting stents for the treatment of coronary bifurcation lesions from DKCRUSH-1 study].

    Science.gov (United States)

    Chen, Shao-liang; Zhang, Jun-jie; Ye, Fei; Chen, Yun-dai; Lü, Shu-zheng; Tan, Huaycheem; Patel, Tejas; Kenji, Kawajiri; Tamari, Israel; Shan, Shou-jie; Zhu, Zhong-sheng; Lin, Song; Tian, Nai-liang; Li, Xiao-bo; Liu, Zhi-zhong; Lee, Michael; Wei, Meng; Xu, Ya-wei; Yuan, Zheng-bai; Qian, Jun; Sun, Xue-wen; Yang, Song; Chen, Jin-guo; He, Ben; Sumit, Suji

    2008-02-01

    To determine independent factors correlated with clinical effects of DK crush and classical crush technique with drug-eluting stents on bifurcation lesions. 311 patients with bifurcation lesions were randomized to classical (C, n = 156) or double kissing (DK) crush (n = 155) stent implantation group. The primary endpoints included major adverse cardiac events (MACE). Final kissing balloon inflation (FKBI) success rate was 76% in C and 100% in DK groups (P DK crush procedure was characterized by lower unsatisfactory FKBI rate (27.6% vs.6.3%, P DK groups (P = 0.01), respectively. Cumulative 8-month MACE was 35.9% in without-FKBI and 19.7% in with-FKBI sub-groups, and 11.4% in DK group (P = 0.02). The incidence of stent thrombosis was 3.2% in C group (5.1% without vs. 1.7% with FKBI) and 1.3% in DK group (P > 0.05). The predictive factors of MACE included minimal side branch stent lumen diameter and lack of DK crush technique. DK crush technique is an alternative of double stenting techniques in terms of improvement of restenosis and clinical outcomes.

  18. 2G ethanol from the whole sugarcane lignocellulosic biomass.

    Science.gov (United States)

    Pereira, Sandra Cerqueira; Maehara, Larissa; Machado, Cristina Maria Monteiro; Farinas, Cristiane Sanchez

    2015-01-01

    In the sugarcane industry, large amounts of lignocellulosic residues are generated, which includes bagasse, straw, and tops. The use of the whole sugarcane lignocellulosic biomass for the production of second-generation (2G) ethanol can be a potential alternative to contribute to the economic viability of this process. Here, we conducted a systematic comparative study of the use of the lignocellulosic residues from the whole sugarcane lignocellulosic biomass (bagasse, straw, and tops) from commercial sugarcane varieties for the production of 2G ethanol. In addition, the feasibility of using a mixture of these residues from a selected variety was also investigated. The materials were pretreated with dilute acid and hydrolyzed with a commercial enzymatic preparation, after which the hydrolysates were fermented using an industrial strain of Saccharomyces cerevisiae. The susceptibility to enzymatic saccharification was higher for the tops, followed by straw and bagasse. Interestingly, the fermentability of the hydrolysates showed a different profile, with straw achieving the highest ethanol yields, followed by tops and bagasse. Using a mixture of the different sugarcane parts (bagasse-straw-tops, 1:1:1, in a dry-weight basis), it was possible to achieve a 55% higher enzymatic conversion and a 25% higher ethanol yield, compared to use of the bagasse alone. For the four commercial sugarcane varieties evaluated using the same experimental set of conditions, it was found that the variety of sugarcane was not a significant factor in the 2G ethanol production process. Assessment of use of the whole lignocellulosic sugarcane biomass clearly showed that 2G ethanol production could be significantly improved by the combined use of bagasse, straw, and tops, when compared to the use of bagasse alone. The lower susceptibility to saccharification of sugarcane bagasse, as well as the lower fermentability of its hydrolysates, can be compensated by using it in combination with straw

  19. Genome Editing in Sugarcane: Challenges ahead

    Directory of Open Access Journals (Sweden)

    Chakravarthi Mohan

    2016-10-01

    Full Text Available Genome editing opens new and unique opportunities for researchers to enhance crop production. Until 2013, the zinc finger nucleases (ZFNs and transcription activator-like effector nucleases (TALENs were the key tools used for genome editing applications. The advent of RNA-guided engineered nucleases - the type II clustered regularly interspaced short palindromic repeat (CRISPR/Cas9 (CRISPR-associated system from Streptococcus pyogenes holds great potential since it is simple, effective and more versatile than ZFNs and TALENs. CRISPR/Cas9 system has already been successfully employed in several crop plants. Use of these techniques is in its infant stage in sugarcane. Jung and Altpeter (2016 have reported TALEN mediated approach for the first time to reduce lignin content in sugarcane to make it amenable for biofuel production. This is so far the only report describing genome editing in sugarcane. Large genome size, polyploidy, low transformation efficiency, transgene silencing and lack of high throughput screening techniques are certainly great challenges for genome editing in sugarcane which would be discussed in detail in this review.

  20. Evaluation of crushed ticagrelor tablet doses: recovery following crushing and naso-gastric tube passage ex vivo.

    Science.gov (United States)

    Crean, Barry; Finnie, Cindy; Crosby, Anna

    2013-06-01

    Orally available ticagrelor in combination with low-dose aspirin (75-100 mg/day) is indicated for adult patients with acute coronary syndromes. However, patients with swallowing difficulties may be unable to consume the currently available 90-mg tablet. It is hypothesized that ticagrelor could be given to this patient cohort as a crushed dose administered either orally or via a naso-gastric (NG) tube. To investigate the potential use of crushed ticagrelor tablets (90- and 180-mg doses) for oral dose or NG tube administration. Ticagrelor tablets (90 or 180 mg [two 90-mg tablets]) were prepared to emulate oral and NG tube administration by similar methods. For the oral dose, ticagrelor tablets were crushed using a mortar and pestle and transferred to a dosing cup. 100 mL of water was added to the mortar, stirred, and the contents were transferred to the dosing cup and stirred to form a suspension. At this stage, where the suspension would normally be administered to a patient, it was collected for high performance liquid chromatography (HPLC) analysis. The mortar was then flushed with 100 mL of water, and the contents were again transferred to the dosing cup, stirred, and collected for HPLC analysis. For the NG dose, polyvinylchloride, polyurethane, and silicone size CH10 NG tubes were used. The tablets were crushed using a mortar and pestle, diluted with 50 mL of water, and stirred. At this stage, where the suspension would normally be administered to a patient through an NG tube using a syringe, it was collected for HPLC analysis. The mortar was then flushed with two additional 50 mL aliquots of water and the contents were passed through the NG tube. HPLC analysis examined the recoverability of ticagrelor in each of the dose suspensions and flushes and the stability of the suspension when held in a syringe for up to 2 h. One or two crushed 90-mg ticagrelor tablets, prepared for either oral or NG tube administration, delivers a mean dose of ≥97% of the original

  1. Residual biomass potential of commercial and pre-commercial sugarcane cultivars

    Directory of Open Access Journals (Sweden)

    Marcos Guimarães de Andrade Landell

    2013-10-01

    Full Text Available Sugarcane (Saccharum spp. is an efficient and sustainable alternative for energy generation compared to non-renewable sources. Currently, during the mechanized harvest process, the straw left in the field can be used in part for the second generation ethanol and increasing the electric energy production. Thus, this study aimed to provide information on the potential for residual biomass cultivars of sugarcane cropping system. This study provides the following information: yield of straw, depending on the calculated leaf area index and the number of tillers per linear meter; primary energy production of several sugarcane genotypes; contribution of dry tops and leaves; biomass yield; and evaluation of fiber, cellulose, hemicellulose and lignin. Preliminary results obtained by researchers of the State of São Paulo, Brazil, and reCviews related studies are presented. The results suggest that the production of sugarcane straw content varies according to the cultivars; the greater mass of sugarcane straw is in the top leaves and that the potential for the crude energy production of sugarcane per area unit can be increased using fiber-rich species or species that produce more straw. The straw indexes was shown to be a good indicator and allow the estimation of straw volumes generated in a sugarcane crop. The cellulose, hemicellulose and lignin composition in sugarcane is distinct among varieties. Therefore, it is possible to develop distinct biomass materials for energy production and for the development of sugarcane mills using biochemical processes and thermal routes.

  2. Documenting the global impacts of beach sand mining

    Science.gov (United States)

    Young, R.; Griffith, A.

    2009-04-01

    significant rise in global sea level over the coming decades. Most governments recognize the local impacts of sand mining and mining activities are illegal in many localities. However, enforcement of these protections has been problematic and there has been little pressure to stop the practice from local or international environmental groups. In many cases, addressing the issue of sand mining requires addressing the local issues that allow it to persist. This includes poverty, corruption, and unregulated development. In areas where beach sand mining significantly supports the local economy, care needs to be given that local workers are given alternative means of income, and builders are provided an affordable substitute for the sand (e.g. crushed rock). Regardless, it is time for both academics and NGOs to address the cumulative environmental impacts of the direct destruction of the world's beaches through mining activities.

  3. Sugarcane Bagasse: A Potential Medium for Fungal Cultures

    OpenAIRE

    Arushdeep Sidana; Umar Farooq

    2014-01-01

    Worldwide, sugarcane industries produce tons of sugarcane bagasse as residual/waste material. This residual material is rich in complex lignocellulosic substances and may be used as a low cost carbon and energy source for the growth of fungal species. The present work was aimed at designing a sugarcane waste-based medium as a substitute for expensive commercial media for growing fungal cultures. Eight species of fungi, namely, Aspergillus niger, Candida albicans, Saccharomyces cerevisiae, Fus...

  4. Coke properties in relation to charge preparation techniques. [Selective crushing

    Energy Technology Data Exchange (ETDEWEB)

    Morozov, O S

    1979-01-01

    Selective crushing is essential to obtain the required coke properties, so that in the coarse fractions there is a considerable reduction in the middlings and dirt normally difficult to crush. These are at the same time enriched with vitrinite so that there is an increase in the coal substance as such, reflected in improved caking capacity in the coarse size range. Various methods of selective crushing are employed, including air entrainment mills, fluidised bed systems. Other advantages claimed for selective crushing are the uniform pore distribution and air permeability and also the diminished breakage stress.

  5. The aptitude of the soils for the production of sugarcane. Part 2: Comparison of two methods at ‘Ciudad Caracas’ sugarcane mill

    Directory of Open Access Journals (Sweden)

    Nelson C. Arzola Pina

    2015-03-01

    Full Text Available The object of this study was to compare two methods for determining the aptitude of soils for growing Sugarcane in Cuba. The information was provided by three sugarcane farms owned by Ciudad Caracas sugarcane mill in the municipality of Santa Isabel de Las Lajas in Cienfuegos. The information of the soils from each farm was taken from the 1:25 000 scale cadastral maps designed by Ministerio de la Agricultura (MINAG. Rainfall data was collected from the nearby stations rain gauges. And the sugarcane yield was reported by each farm. The aptitude of the soils was determined by two methods (AGRO 24 de 1993 y Arzola de 1999 using the information available. Results showed that both methods are appropriate for selecting soils with higher productive potential, and are a useful tool for making right decisions for optimizing the land use at each sugarcane farm.

  6. Controlling sugarcane diseases in Florida: a challenge in constant evolution

    Science.gov (United States)

    Diseases are limiting factors for the sugarcane crop in almost any sugarcane growing location. More than 40 diseases have been recorded in Florida, with bown rust, orange rust and yellow leaf currently impacting on sugarcane production. Ideally, these diseases should be controlled using resistant ...

  7. Controlling sugarcane diseases in Florida: a challenge in constant evolution

    Science.gov (United States)

    Diseases are limiting factors for the sugarcane crop in almost any sugarcane growing location. More than 40 diseases have been recorded in Florida, with brown rust, orange rust and yellow leaf currently impacting on sugarcane production. Ideally, these diseases should be controlled using resistant c...

  8. Ethanol production using hemicellulosic hydrolyzate and sugarcane ...

    African Journals Online (AJOL)

    The use of vegetable biomass as substrate for ethanol production could reduce the existing usage of fossil fuels, thereby minimizing negative environmental impacts. Due to mechanical harvesting of sugarcane, the amount of pointer and straw has increased in sugarcane fields, becoming inputs of great energy potential.

  9. Ethanol production using hemicellulosic hydrolyzate and sugarcane ...

    African Journals Online (AJOL)

    Juliana

    2015-02-11

    Feb 11, 2015 ... The use of vegetable biomass as substrate for ethanol production could reduce the ... Fermentation was performed in a laboratory scale using the J10 and FT858 ... Key words: Hydrolysis of sugarcane straw and pointers, sugarcane juice, ..... Ethanol: An Overview about Composition, Pretreatment Methods,.

  10. Influence of Local Sand on the Physicomechanical Comportment and Durability of High Performance Concrete

    Directory of Open Access Journals (Sweden)

    Nadia Tebbal

    2016-01-01

    Full Text Available This research consists of incorporating the crushed sand (CS in the composition of a concrete and studies the effect of its gradual replacement by the sand dune (SD on sustainability of high performance concrete (HPC in aggressive environments. The experimental study shows that the parameters of workability of HPC are improved when the CS is partially replaced by the SD (1/3 additional quantities of water is needed to meet the workability properties. The mechanical strengths decrease by adding the SD to CS, but they reach acceptable values with CS in moderate dosages. The HPC performances are significantly better than the control concrete made up with the same aggregates. The specification tests of durability show that the water absorbing coefficients by capillarity increase after adding SD to the CS.

  11. Sugarcane boiler ash as an amendment for soilless growing media

    Science.gov (United States)

    In 2016, research was conducted to investigate the use of sugarcane bagasse ash (SBA) as an amendment to soilless planting media for the production of vegetable seedlings. Typically, the eleven Louisiana sugarcane mills use a portion of the sugarcane bagasse for fuel, producing over 60,000 tons of S...

  12. Vegetable seedling production with sugarcane bagasse ash

    Science.gov (United States)

    The eleven sugarcane mills in Louisiana processed 380,000 ac and 12.8 million tons of harvested sugarcane in 2014, producing 1.5 million tons of raw sugar (brown sugar), and an estimated 3 million tons of the fibrous plant residue called bagasse. Bagasse is the fibrous material remaining after remov...

  13. Integrated management of bermudagrass (Cynodon dactylon) in sugarcane

    Science.gov (United States)

    Bermudagrass is a difficult perennial weed to manage in Louisiana sugarcane. Research was conducted to compare interrow tillage practice, postharvest residue management, and herbicide placement on bermudagrass proliferation and sugarcane yield. Tillage frequencies included conventional (four tillage...

  14. Evaluation of the juice brix of wild sugarcanes (Saccharum spontaneum indigenous to Japan

    Directory of Open Access Journals (Sweden)

    Takeo Sakaigaichi

    2016-04-01

    Full Text Available Modern sugarcane cultivars are derived from the interspecific crossing between Saccharum officinarum and wild sugarcane, Saccharum spontaneum. The introgression of valuable characteristics from wild sugarcane is recognized as extremely important, but this process typically requires long-term effort over multiple generations of backcrosses owing to the low sugar content of the initial interspecific hybrids. In this study, we aimed to identify Japanese wild sugarcanes with high juice brix in order to promote effective interspecific crossing of sugarcane. Sixty-four accessions from the Nansei Islands and 70 accessions from the Honshu were evaluated for juice brix. Wild sugarcanes with high juice brix were demonstrated to exist among wild sugarcanes indigenous to the Honshu. A significant difference was observed between the median juice brix values of wild sugarcanes of the Nansei Islands and those of the Honshu. The relationship between juice brix and stem traits was then examined in 20 wild sugarcanes, 10 each from the Nansei Islands and the Honshu. The reproducibility of juice brix value in both experiments was confirmed. In contrast to juice brix, stem traits, such as length, diameter, and volume, were typically smaller in wild sugarcanes from the Honshu. Moreover, a negative correlation was observed between the index of stem volume and juice brix. In this study, we identified outstanding wild sugarcanes with high juice brix. Using germplasms from the identified wild sugarcanes in interspecific crossing could contribute to the increases in both yield and sugar content.

  15. Impact of biotechnology on sugarcane agriculture and industry

    Science.gov (United States)

    There are nine key issues that can influence the productivity and sustainability of the sugarcane industry. These include land, soil fertility, water, variety, planting density, crop protection, cultural practices, harvesting and processing, and information technology. To all sugarcane farmers, it r...

  16. Crushed aggregates for roads and their properties for frost protection

    Science.gov (United States)

    Kuznetsova, Elena; Willy Danielsen, Svein

    2015-04-01

    Crushed aggregates for roads and their properties for frost protection Elena Kuznetsova, NTNU and Svein Willy Danielsen, SINTEF With natural (fluvial, glaciofluvial) sand/gravel resources being rapidly depleted in many countries, the last decade has seen a significant trend towards using more alternative materials for construction purpose. In Norway the development and implementation of crushed aggregate technology has been the most important way to get around the problem with increased resource scarcity. Today Norway is one the European countries with the highest percentage of crushed/manufactured aggregates. A crushed product will reveal a different particle size distribution, a sharper, more angular particle shape, and not least - a significantly different mineral composition. The latter may often be characterised by more polymineral composition, and it will also much more depend on the local bedrock. When handled with care and knowledge, these differences can give the user a lot of new opportunities relating to materials design. Norwegian road construction practice has changed significantly during the last 40 years due to the replacement of gravel by crushed rock materials in the granular layers of the pavements. The use of non-processed rock materials from blasting was allowed in the subbase layer until 2012. This was a reason for a lot of problems with frost heaving due to inhomogeneity of this material, and in practice it was difficult to control the size of large stones. Since 2012 there is a requirement that rock materials for use in the subbase layer shall be crushed (Handbook N200, 2014). During the spring 2014 The Norwegian Public Roads Administration introduced a new handbook with requirements for roads construction in Norway, including new specifications for the frost protection layer. When pavements are constructed over moist and/or frost susceptible soils in cold and humid environments, the frost protection layer also becomes a very important part

  17. 2G ethanol from the whole sugarcane lignocellulosic biomass

    OpenAIRE

    Pereira, Sandra Cerqueira; Maehara, Larissa; Machado, Cristina Maria Monteiro; Farinas, Cristiane Sanchez

    2015-01-01

    Background In the sugarcane industry, large amounts of lignocellulosic residues are generated, which includes bagasse, straw, and tops. The use of the whole sugarcane lignocellulosic biomass for the production of second-generation (2G) ethanol can be a potential alternative to contribute to the economic viability of this process. Here, we conducted a systematic comparative study of the use of the lignocellulosic residues from the whole sugarcane lignocellulosic biomass (bagasse, straw, and to...

  18. Impact of sugarcane field residue and mill bagasse on seed germination

    Science.gov (United States)

    Research indicates that sugarcane field residue and sugarcane mill bagasse may be allelopathic. Allelopathy is the chemical interaction between plants, which may result in the inhibition of plant growth and development. Previous research in Louisiana indicated that sugarcane field residue may inhibi...

  19. Separability studies of construction and demolition waste recycled sand.

    Science.gov (United States)

    Ulsen, Carina; Kahn, Henrique; Hawlitschek, Gustav; Masini, Eldon A; Angulo, Sérgio C

    2013-03-01

    The quality of recycled aggregates from construction and demolition waste (CDW) is strictly related to the content of porous and low strength phases, and specifically to the patches of cement that remain attached to the surface of natural aggregates. This phase increases water absorption and compromises the consistency and strength of concrete made from recycled aggregates. Mineral processing has been applied to CDW recycling to remove the patches of adhered cement paste on coarse recycled aggregates. The recycled fine fraction is usually disregarded due to its high content of porous phases despite representing around 50% of the total waste. This paper focus on laboratory mineral separability studies for removing particles with a high content of cement paste from natural fine aggregate particles (quartz/feldspars). The procedure achieved processing of CDW by tertiary impact crushing to produce sand, followed by sieving and density and magnetic separability studies. The attained results confirmed that both methods were effective in reducing cement paste content and producing significant mass recovery (80% for density concentration and 60% for magnetic separation). The production of recycled sand contributes to the sustainability of the construction environment by reducing both the consumption of raw materials and disposal of CDW, particularly in large Brazilian centers with a low quantity of sand and increasing costs of this material due to long transportation distances. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Quality control chart for crushed granite concrete

    Directory of Open Access Journals (Sweden)

    Ewa E. DESMOND

    2016-07-01

    Full Text Available A chart for assessing in-situ grade (strength of concrete, has been developed in this study. Four grades of concrete after the Nigerian General Specification for Roads and bridges (NGSRB-C20, C25, C30 and C35, is studied at different water-cement ratios for medium and high slump range. The concrete mixes are made from crushed granite rock as coarse aggregate with river sand as fine aggregate. Compression test on specimens are conducted at curing age of 1, 3, 7, 14, 21, 28 and 56 days. Results on concrete workability from slump values, and water-cement ratios revealed that specimens with lower water-cement ratio were less workable but had higher strength, compared to mixes with higher water cement ratio. A simple algorithm using nonlinear regression analysis performed on each experimental data set produced Strength-Age (S-A curves which were used to establish a quality control chart. The accuracy of these curves were evaluated by computing average absolute error (AAS, the error of estimate (EoE and the average absolute error of estimate (Abs EoE for each concrete mix. These were done based on the actual average experimental strengths to measure how close the predicted values are to the experimental data set. The absolute average error of estimate (Abs. EoE recorded was less than ±10% tolerance zone for concrete works.

  1. Characteristics of Crushing Energy and Fractal of Magnetite Ore under Uniaxial Compression

    Science.gov (United States)

    Gao, F.; Gan, D. Q.; Zhang, Y. B.

    2018-03-01

    The crushing mechanism of magnetite ore is a critical theoretical problem on the controlling of energy dissipation and machine crushing quality in ore material processing. Uniaxial crushing tests were carried out to research the deformation mechanism and the laws of the energy evolution, based on which the crushing mechanism of magnetite ore was explored. The compaction stage and plasticity and damage stage are two main compression deformation stages, the main transitional forms from inner damage to fracture are plastic deformation and stick-slip. In the process of crushing, plasticity and damage stage is the key link on energy absorption for that the specimen tends to saturate energy state approaching to the peak stress. The characteristics of specimen deformation and energy dissipation can synthetically reply the state of existed defects inner raw magnetite ore and the damage process during loading period. The fast releasing of elastic energy and the work done by the press machine commonly make raw magnetite ore thoroughly broken after peak stress. Magnetite ore fragments have statistical self-similarity and size threshold of fractal characteristics under uniaxial squeezing crushing. The larger ratio of releasable elastic energy and dissipation energy and the faster energy change rate is the better fractal properties and crushing quality magnetite ore has under uniaxial crushing.

  2. Crushed-salt constitutive model update

    International Nuclear Information System (INIS)

    Callahan, G.D.; Loken, M.C.; Mellegard, K.D.; Hansen, F.D.

    1998-01-01

    Modifications to the constitutive model used to describe the deformation of crushed salt are presented in this report. Two mechanisms--dislocation creep and grain boundary diffusional pressure solutioning--defined previously but used separately are combined to form the basis for the constitutive model governing the deformation of crushed salt. The constitutive model is generalized to represent three-dimensional states of stress. New creep consolidation tests are combined with an existing database that includes hydrostatic consolidation and shear consolidation tests conducted on Waste Isolation Pilot Plant and southeastern New Mexico salt to determine material parameters for the constitutive model. Nonlinear least-squares model fitting to data from the shear consolidation tests and a combination of the shear and hydrostatic consolidation tests produced two sets of material parameter values for the model. The change in material parameter values from test group to test group indicates the empirical nature of the model but demonstrates improvement over earlier work with the previous models. Key improvements are the ability to capture lateral strain reversal and better resolve parameter values. To demonstrate the predictive capability of the model, each parameter value set was used to predict each of the tests in the database. Based on the fitting statistics and the ability of the model to predict the test data, the model appears to capture the creep consolidation behavior of crushed salt quite well

  3. Crushed-salt constitutive model update

    Energy Technology Data Exchange (ETDEWEB)

    Callahan, G.D.; Loken, M.C.; Mellegard, K.D. [RE/SPEC Inc., Rapid City, SD (United States); Hansen, F.D. [Sandia National Labs., Albuquerque, NM (United States)

    1998-01-01

    Modifications to the constitutive model used to describe the deformation of crushed salt are presented in this report. Two mechanisms--dislocation creep and grain boundary diffusional pressure solutioning--defined previously but used separately are combined to form the basis for the constitutive model governing the deformation of crushed salt. The constitutive model is generalized to represent three-dimensional states of stress. New creep consolidation tests are combined with an existing database that includes hydrostatic consolidation and shear consolidation tests conducted on Waste Isolation Pilot Plant and southeastern New Mexico salt to determine material parameters for the constitutive model. Nonlinear least-squares model fitting to data from the shear consolidation tests and a combination of the shear and hydrostatic consolidation tests produced two sets of material parameter values for the model. The change in material parameter values from test group to test group indicates the empirical nature of the model but demonstrates improvement over earlier work with the previous models. Key improvements are the ability to capture lateral strain reversal and better resolve parameter values. To demonstrate the predictive capability of the model, each parameter value set was used to predict each of the tests in the database. Based on the fitting statistics and the ability of the model to predict the test data, the model appears to capture the creep consolidation behavior of crushed salt quite well.

  4. Agrobiodiversity endangered by sugarcane farming in Mumias and ...

    African Journals Online (AJOL)

    user

    Victoria basin of Kenya and Uganda. In Kenya sugarcane is commercially grown in Western and Nyanza provinces, primarily by small scale farmers followed by large-scale farmers and company/factory nucleus estates (Gok,. 2002). While setting up infrastructure for sugarcane farming and processing, minimal input is ...

  5. Dynamic Response and Residual Helmet Liner Crush Using Cadaver Heads and Standard Headforms.

    Science.gov (United States)

    Bonin, S J; Luck, J F; Bass, C R; Gardiner, J C; Onar-Thomas, A; Asfour, S S; Siegmund, G P

    2017-03-01

    Biomechanical headforms are used for helmet certification testing and reconstructing helmeted head impacts; however, their biofidelity and direct applicability to human head and helmet responses remain unclear. Dynamic responses of cadaver heads and three headforms and residual foam liner deformations were compared during motorcycle helmet impacts. Instrumented, helmeted heads/headforms were dropped onto the forehead region against an instrumented flat anvil at 75, 150, and 195 J. Helmets were CT scanned to quantify maximum liner crush depth and crush volume. General linear models were used to quantify the effect of head type and impact energy on linear acceleration, head injury criterion (HIC), force, maximum liner crush depth, and liner crush volume and regression models were used to quantify the relationship between acceleration and both maximum crush depth and crush volume. The cadaver heads generated larger peak accelerations than all three headforms, larger HICs than the International Organization for Standardization (ISO), larger forces than the Hybrid III and ISO, larger maximum crush depth than the ISO, and larger crush volumes than the DOT. These significant differences between the cadaver heads and headforms need to be accounted for when attempting to estimate an impact exposure using a helmet's residual crush depth or volume.

  6. Constitutive behavior of reconsolidating crushed salt

    International Nuclear Information System (INIS)

    Callahan, G.D.; Mellegard, K.D.; Hansen, F.D.

    1998-02-01

    The constitutive model used to describe deformation of crushed salt is presented in this paper. Two mechanisms--dislocation creep and grain boundary diffusional pressure solutioning--are combined to form the basis for the constitutive model governing deformation of crushed salt. The constitutive model is generalized to represent three-dimensional states of stress. Recently completed creep consolidation tests are combined with an existing database that includes hydrostatic consolidation and shear consolidation tests conducted on Waste Isolation Pilot Plant (WIPP) and southeastern New Mexico salt to determine material parameters for the constitutive model. Nonlinear least-squares model fitting to data from shear consolidation tests and a combination of shear and hydrostatic tests produces two sets of material parameter values for the model. Changes in material parameter values from test group to test group indicate the empirical nature of the model but show significant improvement over earlier work. To demonstrate the predictive capability of the model, each parameter value set was used to predict each of the tests in the database. Based on fitting statistics and ability of the model to predict test data, the model appears to capture the creep consolidation behavior of crushed salt quite well

  7. Crop rotation biomass and arbuscular mycorrhizal fungi effects on sugarcane yield

    Energy Technology Data Exchange (ETDEWEB)

    Ambrosano, Edmilson Jose; Rossi, Fabricio; Guirado, Nivaldo; Teramoto, Juliana Rolim Salome [Agencia Paulista de Tecnologia dos Agronegocios (APTA), Piracicaba, SP (Brazil). Polo Regional Centro Sul; Azcon, Rozario [Consejo Superior de Investigaciones Cientificas (CSIC), Granada (Spain). Estacao Experimental de Zaidin; Cantarela, Heitor [Agencia Paulista de Tecnologia dos Agronegocios (APTA/IAC), Campinas, SP (Brazil). Inst. Agronomico. Centro de Solos e Recursos Ambientais; Ambrosano, Glaucia Maria Bovi [Universidade Estadual de Campinas (UNICAMP), Piracicaba, SP (Brazil). Fac. de Odontologia. Dept. de Odontologia Social], Email: ambrosano@apta.sp.gov.br; Schammass, Eliana Aparecida [Agencia Paulista de Tecnologia dos Agronegocios (APTA/IZ), Nova Odessa, SP (Brazil). Inst. de Zootecnia; Muraoka, Takashi; Trivelin, Paulo Cesar Ocheuze [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil); Ungaro, Maria Regina Goncalves [Agencia Paulista de Tecnologia dos Agronegocios (APTA/IAC), Campinas, SP (Brazil). Inst. Agronomico. Centro de Plantas Graniferas

    2010-07-01

    Sugarcane (Saccharum spp.) is an important crop for sugar production and agro-energy purposes in Brazil. In the sugarcane production system after a 4- to 8-year cycle crop rotation may be used before replanting sugarcane to improve soil conditions and give an extra income. This study had the objective of characterizing the biomass and the natural colonization of arbuscular mycorrhizal fungi (AMF) of leguminous green manure and sunflower (Helianthus annuus L.) in rotation with sugarcane. Their effect on stalk and sugar yield of sugarcane cv. IAC 87-3396 grown subsequently was also studied. Cane yield was harvested in three subsequent cuttings. Peanut cv. IAC-Caiapo, sunflower cv. IAC-Uruguai and velvet bean (Mucuna aterrimum Piper and Tracy) were the rotational crops that resulted in the greater percentage of AMF. Sunflower was the specie that most extracted nutrients from the soil, followed by peanut cv. IAC-Tatu and mung bean (Vigna radiata L. Wilczek). The colonization with AMF had a positive correlation with sugarcane plant height, at the first cut (p = 0.01 and R = 0.52) but not with the stalk or cane yields. Sunflower was the rotational crop that brought about the greatest yield increase of the subsequent sugarcane crop: 46% increase in stalk yield and 50% in sugar yield compared with the control. Except for both peanut varieties, all rotational crops caused an increase in net income of the cropping system in the average of three sugarcane harvests. (author)

  8. 611 A QUANTITATIVE ESTIMATE OF WEEDS OF SUGARCANE ...

    African Journals Online (AJOL)

    Osondu

    Abstract. A survey was conducted in the sugarcane fields of Unilorin Sugar Research Institute, Ilorin in the southern. Guinea savanna agro-ecological zone of Nigeria during 2011 and 2012 cropping seasons with an objective to identify the current status of prevalent weeds in rainfed and irrigated sugarcane fields. A.

  9. Evaluating the Psychological Concomitants of Other-Sex Crush Experiences during Early Adolescence

    Science.gov (United States)

    Bowker, Julie C.; Etkin, Rebecca G.

    2016-01-01

    Very little empirical attention has been paid to other-sex crush experiences during adolescence. As a result, it is not known whether such experiences, which appear to be relatively common, impact psychological adjustment outcomes. This two-wave (3 month interval) longitudinal study of 268 young adolescents (48% girls; M age at Time 1 = 11.84 years) examined the psychological concomitants of other-sex crush experiences (having and being viewed by others as a crush). Anxious-withdrawal and gender were evaluated as moderators. Peer nomination measures at Time 1 assessed both types of crush experiences and mutual friendship involvement, and participants completed self-report measures of loneliness and depressive symptoms at Times 1 and 2. The results from regression analyses revealed significant associations between having an other-sex crush and depressive symptoms at Time 1, after accounting for the effects of mutual friendship. Two interaction effects also revealed that crush status was a risk factor for depressive symptoms at low levels of anxious-withdrawal but a protective factor at high levels. The findings provide the first empirical evidence that other-sex crush experiences are developmentally significant during early adolescence. PMID:26984754

  10. Cold alkaline extraction as a pretreatment for bioethanol production from eucalyptus, sugarcane bagasse and sugarcane straw

    International Nuclear Information System (INIS)

    Carvalho, Danila Morais de; Sevastyanova, Olena; Queiroz, José Humberto de; Colodette, Jorge Luiz

    2016-01-01

    Highlights: • Mathematical approach to optimize the process of cold alkaline extraction. • Hemicelluloses and lignin removal from biomasses by cold alkaline extraction. • Higher xylan and lignin removal for straw during pretreatment. • Formation of pseudo-extractives for eucalyptus during pretreatment. • Higher ethanol production for pretreated sugarcane straw. - Abstract: Optimal conditions for the cold alkaline extraction (CAE) pretreatment of eucalyptus, sugarcane bagasse and sugarcane straw are proposed in view of their subsequent bioconversion into ethanol through the semi-simultaneous saccharification and fermentation (SSSF) process (with presaccharification followed by simultaneous saccharification and fermentation, or SSF). The optimum conditions, which are identified based on an experiment with a factorial central composite design, resulted in the removal of 46%, 52% and 61% of the xylan and 15%, 37% and 45% of the lignin for eucalyptus, bagasse and straw, respectively. The formation of pseudo-extractives was observed during the CAE of eucalyptus. Despite the similar glucose concentration and yield for all biomasses after 12 h of presaccharification, the highest yield (0.065 g_e_t_h_a_n_o_l/g_b_i_o_m_a_s_s), concentrations (5.74 g L"−"1) and volumetric productivity for ethanol (0.57 g L"−"1 h"−"1) were observed for the sugarcane straw. This finding was most likely related to the improved accessibility of cellulose that resulted from the removal of the largest amount of xylan and lignin.

  11. Life cycle assessment of biofuels from an integrated Brazilian algae-sugarcane biorefinery

    International Nuclear Information System (INIS)

    Souza, Simone P.; Gopal, Anand R.; Seabra, Joaquim E.A.

    2015-01-01

    Sugarcane ethanol biorefineries in Brazil produce carbon dioxide, electricity and heat as byproducts. These are essential inputs for algae biodiesel production. In this paper, we assessed ethanol's life cycle greenhouse gas emissions and fossil energy use produced in an integrated sugarcane and algae biorefinery where biodiesel replaces petroleum diesel for all agricultural operations. Carbon dioxide from cane juice fermentation is used as the carbon source for algae cultivation, and sugarcane bagasse is the sole source of energy for the entire facility. Glycerin produced from the biodiesel plant is consumed by algae during the mixotrophic growth phase. We assessed the uncertainties through a detailed Monte-Carlo analysis. We found that this integrated system can improve both the life cycle greenhouse gas emissions and the fossil energy use of sugarcane ethanol by around 10% and 50%, respectively, compared to a traditional Brazilian sugarcane ethanol distillery. - Highlights: • A high diesel consumption is associated to the ethanol sugarcane life-cycle. • Sugarcane industry can provide sources of carbon and energy for the algae growing. • The sugarcane-algae integration can improve the ethanol life-cycle performance. • This integration is a promising pathway for the deployment of algae biodiesel. • There are still significant techno-economic barriers associated with algae biodiesel

  12. Continuous-flow leaching studies of crushed and cored SYNROC

    International Nuclear Information System (INIS)

    Coles, D.G.; Bazan, F.

    1980-01-01

    Both crushed (150 to 300 μm) and cored 1.8 mm diameter) samples of SYNROC have been leached with the single-pass continuous-flow leaching equipment. Crushed samples of Cs-hollandite were also leached in a similar experiment. Temperatures used were 25 0 C and 75 0 C and leachates were 0.03 N NaHCO 3 and distilled water. Leaching rates from SYNROC C were ranked Cs > Sr greater than or equal to Ca > Ba > Zr. A comparison of leaching rates is made between crushed SYNROC, cored SYNROC, and PNL 76-68 glass beads. Problems encountered when comparing the leaching rates of different waste forms are discussed

  13. Registration of ‘CP 09-1430’ Sugarcane

    Science.gov (United States)

    ‘CP 09-1430’ (Reg. No. ; PI 686940 sugarcane (a complex hybrid of Saccharum spp.) was developed and released (6 Jun. 2016) through cooperative research conducted by the USDA-ARS Sugarcane Field Station , Canal Point, the University of Florida, and the Florida Sugar Cane League, Inc. for use on ...

  14. Fractal and Morphological Characteristics of Single Marble Particle Crushing in Uniaxial Compression Tests

    Directory of Open Access Journals (Sweden)

    Yidong Wang

    2015-01-01

    Full Text Available Crushing of rock particles is a phenomenon commonly encountered in geotechnical engineering practice. It is however difficult to study the crushing of rock particles using classical theory because the physical structure of the particles is complex and irregular. This paper aims at evaluating fractal and morphological characteristics of single rock particle. A large number of particle crushing tests are conducted on single rock particle. The force-displacement curves and the particle size distributions (PSD of crushed particles are analysed based on particle crushing tests. Particle shape plays an important role in both the micro- and macroscale responses of a granular assembly. The PSD of an assortment of rocks are analysed by fractal methods, and the fractal dimension is obtained. A theoretical formula for particle crushing strength is derived, utilising the fractal model, and a simple method is proposed for predicting the probability of particle survival based on the Weibull statistics. Based on a few physical assumptions, simple equations are derived for determining particle crushing energy. The results of applying these equations are tested against the actual experimental data and prove to be very consistent. Fractal theory is therefore applicable for analysis of particle crushing.

  15. Computational identification and analysis of novel sugarcane microRNAs

    Directory of Open Access Journals (Sweden)

    Thiebaut Flávia

    2012-07-01

    Full Text Available Abstract Background MicroRNA-regulation of gene expression plays a key role in the development and response to biotic and abiotic stresses. Deep sequencing analyses accelerate the process of small RNA discovery in many plants and expand our understanding of miRNA-regulated processes. We therefore undertook small RNA sequencing of sugarcane miRNAs in order to understand their complexity and to explore their role in sugarcane biology. Results A bioinformatics search was carried out to discover novel miRNAs that can be regulated in sugarcane plants submitted to drought and salt stresses, and under pathogen infection. By means of the presence of miRNA precursors in the related sorghum genome, we identified 623 candidates of new mature miRNAs in sugarcane. Of these, 44 were classified as high confidence miRNAs. The biological function of the new miRNAs candidates was assessed by analyzing their putative targets. The set of bona fide sugarcane miRNA includes those likely targeting serine/threonine kinases, Myb and zinc finger proteins. Additionally, a MADS-box transcription factor and an RPP2B protein, which act in development and disease resistant processes, could be regulated by cleavage (21-nt-species and DNA methylation (24-nt-species, respectively. Conclusions A large scale investigation of sRNA in sugarcane using a computational approach has identified a substantial number of new miRNAs and provides detailed genotype-tissue-culture miRNA expression profiles. Comparative analysis between monocots was valuable to clarify aspects about conservation of miRNA and their targets in a plant whose genome has not yet been sequenced. Our findings contribute to knowledge of miRNA roles in regulatory pathways in the complex, polyploidy sugarcane genome.

  16. Lifecycle assessment of fuel ethanol from sugarcane in Brazil

    DEFF Research Database (Denmark)

    Ometto, A. R.; Hauschild, Michael Zwicky; Roma, W. N. L.

    2009-01-01

    This paper presents the lifecycle assessment (LCA) of fuel ethanol, as 100% of the vehicle fuel, from sugarcane in Brazil. The functional unit is 10,000 km run in an urban area by a car with a 1,600-cm(3) engine running on fuel hydrated ethanol, and the resulting reference flow is 1,000 kg......, and study cases at sugarcane farms and fuel ethanol industries in the northeast of SA o pound Paulo State, Brazil. The methodological structure for this LCA study is in agreement with the International Standardization Organization, and the method used is the Environmental Design of Industrial Products...... fuel. The recommendations for the ethanol lifecycle are: harvesting the sugarcane without burning; more environmentally benign agricultural practices; renewable fuel rather than diesel; not washing sugarcane and implementing water recycling systems during the industrial processing; and improving...

  17. Competitiveness of Brazilian sugarcane ethanol compared to US corn ethanol

    International Nuclear Information System (INIS)

    Crago, Christine L.; Khanna, Madhu; Barton, Jason; Giuliani, Eduardo; Amaral, Weber

    2010-01-01

    Corn ethanol produced in the US and sugarcane ethanol produced in Brazil are the world's leading sources of biofuel. Current US biofuel policies create both incentives and constraints for the import of ethanol from Brazil and together with the cost competitiveness and greenhouse gas intensity of sugarcane ethanol compared to corn ethanol will determine the extent of these imports. This study analyzes the supply-side determinants of cost competitiveness and compares the greenhouse gas intensity of corn ethanol and sugarcane ethanol delivered to US ports. We find that while the cost of sugarcane ethanol production in Brazil is lower than that of corn ethanol in the US, the inclusion of transportation costs for the former and co-product credits for the latter changes their relative competitiveness. We also find that the relative cost of ethanol in the US and Brazil is highly sensitive to the prevailing exchange rate and prices of feedstocks. At an exchange rate of US1=R2.15 the cost of corn ethanol is 15% lower than the delivered cost of sugarcane ethanol at a US port. Sugarcane ethanol has lower GHG emissions than corn ethanol but a price of over $113 per ton of CO 2 is needed to affect competitiveness. (author)

  18. Fermentation of irradiated sugarcane must

    International Nuclear Information System (INIS)

    Alcarde, Andre Ricardo; Horii, Jorge; Walder, Julio Marcos Melges

    2003-01-01

    Bacillus and Lactobacillus are bacteria that usually contaminate the ethanolic fermentation by yeasts and my influence yeast viability. As microorganisms can be killed by ionizing radiation, the efficacy of gamma radiation in reducing the population of certain contaminating bacteria from sugarcane must was examined and, as a consequence, the beneficial effect of lethal doses of radiation on some parameters of yeast-based ethanolic fermentation was verified. Must from sugarcane juice was inoculated with bacteria of the general Bacillus and Lactobacillus. The contaminated must was irradiated with 2.0, 4.0, 6.0, 8.0 and 10.0 kGy of gamma radiation. After ethanolic fermentation by the yeast (Saccharomyces cerevisiae) the total and volatile acidity produced during the process were evaluated: yeast viability and ethanol yield were also recorded. Treatments of gamma radiation reduced the population of the contaminating bacteria in the sugarcane must. The acidity produced during the fermentation decreased as the dose rate of radiation increased. Conversely, the yeast viability increased as the dose rate of radiation increased. Gamma irradiation was an efficient treatment to decontaminate the must and improved its parameters related to ethanolic fermentation, including ethanol yield, which increased 1.9%. (author)

  19. Design and fabrication of an exprerimental model of a seeding unit with widthwise sugarcane scions seeding for use in sugarcane planter

    Directory of Open Access Journals (Sweden)

    A Akbarnia

    2017-05-01

    Full Text Available Introduction Sugarcane, a plant which sugar is extracted from, is planted in vast areas with hot and humid climate. Brazil is the largest producer of sugarcane in the world. The next five major producers, in decreasing order, are India, China, Thailand, Pakistan and Mexico. Sugarcane is a tropical, perennial grass that forms lateral shoots at the base to produce multiple stems, typically three to four meters high and about 5 cm in diameter. The total area under sugarcane plantation in Iran (Khozestan Province is about 80,000 hectares with an average yield of 100 tons per hectare. To increase the yield per unit of land and reduce production costs and move toward sustainable agriculture, mechanization of agricultural operations seems inevitable. Planters are the most important of farm machinery among the mechanization equipment. Sugarcane cultivation is done both by hand and machine. Hand planting operations is laborious and painstaking work and work efficiency is so low and culture costs are so high. In Iran farms, the sugarcane plantation process is carried out manually by the farmers. Considering the climatic conditions, the agricultural soil composition and constitution, and the different plantation pattern used in Iran, the imported planting machines are not suitable for the farming conditions in the country. Moreover, the domestically produced machines, which are mostly based on the imported versions, do not provide adequate performance. Therefore, fabrication of a machine, capable of continuously lifting the sugarcane scions from a container and sending them to a dropper pipe, uniformly and in conformance with the climatic conditions of the sugarcane farms in the country, is of great importance. Materials and Methods In this research, initially, a field study was carried out to identify the problems and shortcomings of imported and copied planting machines in sugarcane farms, such as jamming of the scions conveying mechanism and the

  20. Gas adsorption on crushed quartz and basalt. [in vacuum

    Science.gov (United States)

    Barker, C.; Torkelson, B. E.

    1975-01-01

    The new surfaces generated by crushing rocks and minerals adsorb gases. Different gases are adsorbed to different extents so that both the total amount and composition of the released gases are changed. This affects the interpretation of the composition of the gases obtained by vacuum crushing lunar basalts, meteorites and minerals with fluid inclusions.

  1. Sliding-surface-liquefaction of sand-dry ice mixture and submarine landslides

    Science.gov (United States)

    Fukuoka, H.; Tsukui, A.

    2010-12-01

    In the historic records of off-shore mega-earthquakes along the subduction zone offshore Japan, there are a lot of witnesses about large-scale burning of flammable gas possibly ejected from sea floor. This gas was supposed to be the dissolved methane hydrates (MH), which have been found in the soundings of IODP and other oceanology projects. Since the vast distribution of the BSR in the continental margins, a lot of papers have been published which pointed out the possibilities of that gasification of those hydrates could have triggered gigantic submarine landslides. Global warming or large earthquake or magma intrusion may trigger extremely deep gigantic landslides in continental margins that which could cause catastrophic tsunami. However, recent triaxial compression tests on artificially prepared sand-MH-mixture samples revealed that the they have slightly higher strength than the ones of only sands and MH’s endothermal characteristics may resist against accelerating shear and large-displacement landslides as well. While, the stress-controlled undrained ring shear apparatuses have been developed by Sassa and Fukuoka at Disaster Prevention Research Institute, Kyoto University to reproduce subaerial landslides induced by earthquakes and rainfalls. Using the apparatuses, they found localized liquefaction phenomenon along the deep saturated potential sliding surface due to excess pore pressure generation during the grain crushing induced bulk volume change. This phenomenon was named as “sliding surface liquefaction.” Similar sudden large pore pressure generation was observed in pore pressure control test simulating rain-induced landslides. In this paper, authors examined the shear behavior of the dry sand-dry ice mixture under constant normal stress and shear speed control tests using the latest ring shear apparatus. Sample was mixture of silica sands and dry-ice pellets (frozen carbon-dioxide). Those mixtures are often used for studying the mechanism of the

  2. Inoculation of sugarcane with diazotrophic bacteria

    Directory of Open Access Journals (Sweden)

    Nivaldo Schultz

    2014-04-01

    Full Text Available The sugarcane industry, a strategic crop in Brazil, requires technological improvements in production efficiency to increase the crop energy balance. Among the various currently studied alternatives, inoculation with diazotrophic bacteria proved to be a technology with great potential. In this context, the efficiency of a mixture of bacterial inoculant was evaluated with regard to the agronomic performance and N nutrition of sugarcane. The experiment was carried out on an experimental field of Embrapa Agrobiologia, in Seropédica, Rio de Janeiro, using a randomized block, 2 × 3 factorial design (two varieties and three treatments with four replications, totaling 24 plots. The varieties RB867515 and RB72454 were tested in treatments consisting of: inoculation with diazotrophic bacteria, N-fertilized control with 120 kg ha-1 N and absolute control (no inoculation and no N fertilizer. The inoculum was composed of five strains of five diazotrophic species. The yield, dry matter accumulation, total N in the shoot dry matter and the contribution of N by biological fixation were evaluated, using the natural 15N abundance in non-inoculated sugarcane as reference. The bacterial inoculant increased the stalk yield of variety RB72454 similarly to fertilization with 120 kg ha-1 N in the harvests of plant-cane and first ratoon crops, however the contribution of biological N fixation was unchanged by inoculation, indicating that the benefits of the inoculant in sugarcane may have resulted from plant growth promotion.

  3. Soil Quality Indexing Strategies for Evaluating Sugarcane Expansion in Brazil.

    Science.gov (United States)

    Cherubin, Maurício R; Karlen, Douglas L; Cerri, Carlos E P; Franco, André L C; Tormena, Cássio A; Davies, Christian A; Cerri, Carlos C

    2016-01-01

    Increasing demand for biofuel has intensified land-use change (LUC) for sugarcane (Saccharum officinarum) expansion in Brazil. Assessments of soil quality (SQ) response to this LUC are essential for quantifying and monitoring sustainability of sugarcane production over time. Since there is not a universal methodology for assessing SQ, we conducted a field-study at three sites within the largest sugarcane-producing region of Brazil to develop a SQ index (SQI). The most common LUC scenario (i.e., native vegetation to pasture to sugarcane) was evaluated using six SQI strategies with varying complexities. Thirty eight soil indicators were included in the total dataset. Two minimum datasets were selected: one using principal component analysis (7 indicators) and the other based on expert opinion (5 indicators). Non-linear scoring curves were used to interpret the indicator values. Weighted and non-weighted additive methods were used to combine individual indicator scores into an overall SQI. Long-term conversion from native vegetation to extensive pasture significantly decreased overall SQ. In contrast, conversion from pasture to sugarcane had no significant impact on overall SQ at the regional scale, but site-specific responses were found. In general, sugarcane production improved chemical attributes (i.e., higher macronutrient levels and lower soil acidity); however it has negative effects on physical and biological attributes (i.e., higher soil compaction and structural degradation as well as lower soil organic carbon (SOC), abundance and diversity of macrofauna and microbial activity). Overall, we found that simple, user-friendly strategies were as effective as more complex ones for identifying SQ changes. Therefore, as a protocol for SQ assessments in Brazilian sugarcane areas, we recommend using a small number of indicators (e.g., pH, P, K, Visual Evaluation of Soil Structure -VESS scores and SOC concentration) and proportional weighting to reflect chemical

  4. Soil Quality Indexing Strategies for Evaluating Sugarcane Expansion in Brazil

    Science.gov (United States)

    Cherubin, Maurício R.; Karlen, Douglas L.; Cerri, Carlos E. P.; Franco, André L. C.; Tormena, Cássio A.; Davies, Christian A.; Cerri, Carlos C.

    2016-01-01

    Increasing demand for biofuel has intensified land-use change (LUC) for sugarcane (Saccharum officinarum) expansion in Brazil. Assessments of soil quality (SQ) response to this LUC are essential for quantifying and monitoring sustainability of sugarcane production over time. Since there is not a universal methodology for assessing SQ, we conducted a field-study at three sites within the largest sugarcane-producing region of Brazil to develop a SQ index (SQI). The most common LUC scenario (i.e., native vegetation to pasture to sugarcane) was evaluated using six SQI strategies with varying complexities. Thirty eight soil indicators were included in the total dataset. Two minimum datasets were selected: one using principal component analysis (7 indicators) and the other based on expert opinion (5 indicators). Non-linear scoring curves were used to interpret the indicator values. Weighted and non-weighted additive methods were used to combine individual indicator scores into an overall SQI. Long-term conversion from native vegetation to extensive pasture significantly decreased overall SQ. In contrast, conversion from pasture to sugarcane had no significant impact on overall SQ at the regional scale, but site-specific responses were found. In general, sugarcane production improved chemical attributes (i.e., higher macronutrient levels and lower soil acidity); however it has negative effects on physical and biological attributes (i.e., higher soil compaction and structural degradation as well as lower soil organic carbon (SOC), abundance and diversity of macrofauna and microbial activity). Overall, we found that simple, user-friendly strategies were as effective as more complex ones for identifying SQ changes. Therefore, as a protocol for SQ assessments in Brazilian sugarcane areas, we recommend using a small number of indicators (e.g., pH, P, K, Visual Evaluation of Soil Structure -VESS scores and SOC concentration) and proportional weighting to reflect chemical

  5. Soil Quality Indexing Strategies for Evaluating Sugarcane Expansion in Brazil.

    Directory of Open Access Journals (Sweden)

    Maurício R Cherubin

    Full Text Available Increasing demand for biofuel has intensified land-use change (LUC for sugarcane (Saccharum officinarum expansion in Brazil. Assessments of soil quality (SQ response to this LUC are essential for quantifying and monitoring sustainability of sugarcane production over time. Since there is not a universal methodology for assessing SQ, we conducted a field-study at three sites within the largest sugarcane-producing region of Brazil to develop a SQ index (SQI. The most common LUC scenario (i.e., native vegetation to pasture to sugarcane was evaluated using six SQI strategies with varying complexities. Thirty eight soil indicators were included in the total dataset. Two minimum datasets were selected: one using principal component analysis (7 indicators and the other based on expert opinion (5 indicators. Non-linear scoring curves were used to interpret the indicator values. Weighted and non-weighted additive methods were used to combine individual indicator scores into an overall SQI. Long-term conversion from native vegetation to extensive pasture significantly decreased overall SQ. In contrast, conversion from pasture to sugarcane had no significant impact on overall SQ at the regional scale, but site-specific responses were found. In general, sugarcane production improved chemical attributes (i.e., higher macronutrient levels and lower soil acidity; however it has negative effects on physical and biological attributes (i.e., higher soil compaction and structural degradation as well as lower soil organic carbon (SOC, abundance and diversity of macrofauna and microbial activity. Overall, we found that simple, user-friendly strategies were as effective as more complex ones for identifying SQ changes. Therefore, as a protocol for SQ assessments in Brazilian sugarcane areas, we recommend using a small number of indicators (e.g., pH, P, K, Visual Evaluation of Soil Structure -VESS scores and SOC concentration and proportional weighting to reflect

  6. Development of somaclones in sugarcane genotype BF-162 and ...

    African Journals Online (AJOL)

    pris

    2012-02-21

    Feb 21, 2012 ... Cluster and sub cluster formation further verified the presence of variability in the red rot resistant somaclones with respect to the parent. Key words: Sugarcane, callogenesis, organogenesis, somaclone, polymorphism, cluster. INTRODUCTION. Sugarcane (Saccharum officinarum L) is a major source.

  7. Crushing Strength of Ship Structures

    DEFF Research Database (Denmark)

    Cerup-Simonsen, Bo; Abramowicz, W.; Høstgaard-Brene, C.N.S.

    1999-01-01

    The crushing response of ship structures is of primary importance to the designers and practicing engineers concerned with accidental loading and accident reconstruction of marine vehicles. Ship to-ship collisions, ship-harbor infrastructure interaction or ship-offshore structure interaction are ...

  8. Crushing strength of HTGR fuel particles

    International Nuclear Information System (INIS)

    Lackey, W.J.; Stinton, D.P.; Davis, L.E.; Beatty, R.L.

    1976-01-01

    The whole-particle crushing strengths of High-Temperature Gas-Cooled Reactor fertile and fissile coated particles were measured and correlated with fabrication procedures. The crushing strength of Biso-coated fertile particles was increased by the following factors: (1) increasing the outer coating thickness by 10 μm increased strengths by 0.3 lb (1.3 N) for annealed particles and by 0.5 lb (2.2 N) for unannealed particles. (2) An 1800 0 C postcoating anneal increased strengths by 1 lb (4.4 N) for particles with thick outer coatings and by 2 lb (8.9 N) for particles having thin coatings. (3) Increasing the inner coating density by 0.1 g/cm 3 increased strength by 0.6 lb (2.7 N). The crushing strength of Triso-coated fissile particles was proportional to the thickness of the SiC coatings, and strength decreased on annealing by about 0.2 lb (0.9 N) when a porous plate was used to distribute the coating gas and by about 1.5 lb (6.7 N) when a conical gas distributor was used. The strengths of fertile and fissile coated particles as well as uncoated kernels appear adequate to allow fuel fabrication without excessive particle damage

  9. Frost Damage Detection in Sugarcane Crop Using Modis Images and Srtm Data

    Science.gov (United States)

    Rudorff, B.; Alves de Aguiar, D.; Adami, M.

    2011-12-01

    Brazil is the largest world producer of sugarcane which is used to produce almost equal proportions of either sugar (food) or ethanol (biofuel). In recent years sugarcane crop production has increased fast to meet the growing market demand for sugar and ethanol. This increase has been mainly due to expansion in crop area, but sugarcane production is also subjected to several factors that influence both the agricultural crop yield (tons of stalks/ha) and the industrial yield (kg of sugar/ton of stalks). Sugarcane is a semi-perennial crop that experiences major growth during spring and summer seasons with large demands for water and high temperatures to produce good stalk formation (crop yield). The harvest is performed mainly during fall and winter seasons when water availability and temperature should be low in order to accumulate sucrose in the stalks (industrial yield). These favorable climatic conditions for sugarcane crop are found in several regions in Brazil, particularly in São Paulo state, which is the major sugarcane producer in Brazil being responsible for almost 60% of its production. Despite the favorable climate in São Paulo state there is a certain probability of frost occurrence from time to time that has a negative impact on sugarcane crop, particularly on industrial yield, reducing the amount of sugar in the stalks; having consequences on price increase and product shortage. To evaluate the impact of frost on sugarcane crop, in the field, on a state level, is not a trivial task; however, this information is relevant due to its direct impact on the consumer market. Remote sensing images allow a synoptic view and present great potential to monitor large sugarcane plantations as has been done since 2003 in São Paulo state by the Canasat Project with Landsat type images (http://www.dsr.inpe.br/laf/canasat/en/). Images acquired from sensors with high temporal resolution such as MODIS (Moderate-Resolution Imaging Spectroradiometer) present the

  10. Study of protein and metabolic profile of sugarcane workers

    Energy Technology Data Exchange (ETDEWEB)

    Polachini, G.M.; Tajara, E.H. [Faculdade de Medicina de Sao Jose do Rio Preto (FAMERP), SP (Brazil); Santos, U.P. [Universidade de Sao Paulo (USP), SP (Brazil); Zeri, A.C.M.; Paes Leme, A.F. [Laboratorio Nacional de Luz Sincrotron (LNLS), Campinas, SP (Brazil)

    2012-07-01

    Full text: The National Alcohol Program (Proalcool) is a successful Brazilian renewable fuel initiative aiming to reduce the country's oil dependence. Producing ethanol from sugar cane, the program has shown positive results although accompanied by potential damage. The environmental impact mainly derives from the particulate matter emissions due to sugarcane burning, which is potentially harmful to human health. The physical activity of sugarcane workers is repetitive and exhaustive and is carried out in presence of dust, smoke and soot. The efforts by the sugarcane workers during the labor process result in increased risks of nervous, respiratory and cardiovascular system diseases and also in premature death. The aim of the present study was to investigate the effect of occupational stress on protein and metabolic profile of sugarcane workers. Forty serum samples were analyzed by 1-DE and LC MS/MS proteomic shotgun strategy and nuclear magnetic resonance (NMR). A set of proteins was found to be altered in workers after crops when compared with controls. The analysis of NMR spectra by Chenomx also showed differences in the expression of metabolites. For example, lactate displayed higher levels in control subjects than in sugarcane workers, and vice versa for the acetate. The concentrations of the two metabolites were lower after the crop, except in the case of acetate, which remained uniform in the control subjects before and after the crop. The present findings can have important application for rational designs of preventive measures and early disease detection in sugarcane workers. (author)

  11. Study of protein and metabolic profile of sugarcane workers

    International Nuclear Information System (INIS)

    Polachini, G.M.; Tajara, E.H.; Santos, U.P.; Zeri, A.C.M.; Paes Leme, A.F.

    2012-01-01

    Full text: The National Alcohol Program (Proalcool) is a successful Brazilian renewable fuel initiative aiming to reduce the country's oil dependence. Producing ethanol from sugar cane, the program has shown positive results although accompanied by potential damage. The environmental impact mainly derives from the particulate matter emissions due to sugarcane burning, which is potentially harmful to human health. The physical activity of sugarcane workers is repetitive and exhaustive and is carried out in presence of dust, smoke and soot. The efforts by the sugarcane workers during the labor process result in increased risks of nervous, respiratory and cardiovascular system diseases and also in premature death. The aim of the present study was to investigate the effect of occupational stress on protein and metabolic profile of sugarcane workers. Forty serum samples were analyzed by 1-DE and LC MS/MS proteomic shotgun strategy and nuclear magnetic resonance (NMR). A set of proteins was found to be altered in workers after crops when compared with controls. The analysis of NMR spectra by Chenomx also showed differences in the expression of metabolites. For example, lactate displayed higher levels in control subjects than in sugarcane workers, and vice versa for the acetate. The concentrations of the two metabolites were lower after the crop, except in the case of acetate, which remained uniform in the control subjects before and after the crop. The present findings can have important application for rational designs of preventive measures and early disease detection in sugarcane workers. (author)

  12. Application of sugarcane bagasse ash as a partial cement ...

    African Journals Online (AJOL)

    Sugarcane bagasse ash is a byproduct of sugar factories found after burning sugarcane ... making materials especially cement, resulting in an increase in price. ... advantages can also be exploited by using bagasse ash as a partial cement ... Normal consistency, Setting time, Compressive strength, Water penetration depth.

  13. [Effects of reduced nitrogen application and soybean intercropping on nitrogen balance of sugarcane field].

    Science.gov (United States)

    Liu, Yu; Zhang, Ying; Yang, Wen-ting; Li, Zhi-xian; Guan, Ao-mei

    2015-03-01

    A four-year (2010-2013) field experiment was carried out to explore the effects of three planting patterns (sugarcane, soybean monoculture and sugarcane-soybean 1:2 intercropping) with two nitrogen input levels (300 and 525 kg . hm-2) on soybean nitrogen fixation, sugarcane and soybean nitrogen accumulation, and ammonia volatilization and nitrogen leaching in sugarcane field. The results showed that the soybean nitrogen fixation efficiency (NFE) of sugarcane-soybean inter-cropping was lower than that of soybean monoculture. There was no significant difference in NFE among the treatments with the two nitrogen application rates. The nitrogen application rate and inter-cropping did not remarkably affect nitrogen accumulation of sugarcane and soybean. The ammonia volatilization of the reduced nitrogen input treatment was significantly lower than that of the conventional nitrogen input treatment. Furthermore, there was no significant difference in nitrogen leaching at different nitrogen input levels and among different planting patterns. The sugarcane field nitrogen balance analysis indicated that the nitrogen application rate dominated the nitrogen budget of sugarcane field. During the four-year experiment, all treatments leaved a nitrogen surplus (from 73.10 to 400.03 kg . hm-2) , except a nitrogen deficit of 66.22 kg . hm-2 in 2011 in the treatment of sugarcane monoculture with the reduced nitrogen application. The excessive nitrogen surplus might increase the risk of nitrogen pollution in the field. In conclusion, sugarcane-soybean intercropping with reduced nitrogen application is feasible to practice in consideration of enriching the soil fertility, reducing nitrogen pollution and saving production cost in sugarcane field.

  14. Lack of Detection of Bt Sugarcane Cry1Ab and NptII DNA and Proteins in Sugarcane Processing Products Including Raw Sugar

    Directory of Open Access Journals (Sweden)

    Adriana Cheavegatti-Gianotto

    2018-03-01

    Full Text Available Brazil is the largest sugarcane producer and the main sugar exporter in the world. The industrial processes applied by Brazilian mills are very efficient in producing highly purified sugar and ethanol. Literature presents evidence of lack of DNA/protein in these products, regardless of the nature of sugarcane used as raw material. Recently CTNBio, the Brazilian biosafety authority, has approved the first biotechnology-derived sugarcane variety for cultivation, event CTC175-A, which expresses the Cry1Ab protein to control the sugarcane borer (Diatraea saccharalis. The event also expresses neomycin-phosphotransferase type II (NptII protein used as selectable marker during the transformation process. Because of the high purity of sugar and ethanol produced from genetically modified sugarcane, these end-products should potentially be classified as “pure substances, chemically defined,” by Brazilian Biosafety Law No. 11.105. If this classification is to be adopted, these substances are not considered as “GMO derivatives” and fall out of the scope of Law No. 11.105. In order to assess sugar composition and quality, we evaluate Cry1Ab and NptII expression in several sugarcane tissues and in several fractions from laboratory-scale processing of event CTC175-A for the presence of these heterologous proteins as well as for the presence of traces of recombinant DNA. The results of these studies show that CTC175-A presents high expression of Cry1Ab in leaves and barely detectable expression of heterologous proteins in stalks. We also evaluated the presence of ribulose-1,5-bisphosphate carboxylase/oxygenase protein and DNA in the fractions of the industrial processing of conventional Brazilian sugarcane cultivars. Results from both laboratory and industrial processing were concordant, demonstrating that DNA and protein are not detected in the clarified juice and downstream processed fractions, including ethanol and raw sugar, indicating that protein

  15. Properties of Sugarcane Fiber on the Strength of the Normal and Lightweight Concrete

    Directory of Open Access Journals (Sweden)

    Sheikh Khalid Faisal

    2017-01-01

    Full Text Available The usage of natural fiber in construction are widely used in building materials engineering. However, using sugarcane fiber waste material as a natural in construction is very precious, because it can increase crack control and ductility, brittle concrete. Furthermore, the usage of sugarcane in construction can reduce of environmental pollution.In this study, a mixture of sugarcane fiber to be used in normal grade concrete and lightweight concrete to determine whether there is an increase in the compressive and tensile strength of the concrete. The objective of this study was to determine the compressive and tensile strength between control concrete and concrete mix with sugarcane fiber. In addition, the optimal volume of sugarcane fiber in the concrete mixture where the percentage of sugarcane fiber used was 0.5%, 1.0% and 1.5%. Compessive strength was tested on days 7 and 28 after curing test is carried out. Meanwhile, the tensile test, has been carried out to measure the tensile strength of sugarcane fiber relations in concrete mixes only at 28 day curing. Result of the testing showed that the optimum value containing admixtures of sugarcane is 0.5%. This percentage get the value of compressive strength is nearest with concrete control and the value of tensile strength is higher than concrete control and also the timing of concrete to cracked getting slower. Therefore, the use of sugarcane fiber suitable for addition that do not exceed 0.5% of the concrete mixture.

  16. Growing Sugarcane for Bioenergy – Effects on the Soil

    NARCIS (Netherlands)

    Hartemink, A.E.

    2010-01-01

    An increasing area of sugarcane is being growing for the production of bioenergy. Sugarcane puts a high demands on the soil due to the use of heavy machinery and because large amounts of nutrients are removed with the harvest. Biocides and inorganic fertilizers introduces risks of groundwater

  17. The effect of proposed crush tests on transport containers

    International Nuclear Information System (INIS)

    1984-09-01

    Crush tests were performed on two AECL F112 packaging specimens, two simulated AECL-CRNL 4H packaging specimens, and on empty steel drums. The 9 m drop test was carried out on two simulated AECL-CRNL 4H packaging specimens for comparison with the effects of the crush test. The tests were filmed using high speed photography and 35mm still photographs

  18. Incorporation des sables concassés à différents taux de fillers dans la composition des bétons à très hautes performances : Comportement mécanique et Durabilité

    Directory of Open Access Journals (Sweden)

    D. Chiheb

    2016-12-01

    Full Text Available Chiheb, D., Belaoura, M., Oudjit, M.N. and Bali, A. 2016. Incorporation of crushed sand at different rates of fillers in the composition of concretes with very high performances: mechanical behavior and durability. Lebanese Science Journal, 17 (2: 146-165. This study focuses on the characterization of concretes Very High Performance comparing crushed sand to high levels of fine limestone available in large quantities in Algeria as an alternative resource to rolled sand. The parameters studied were the sand substitution rate to roll crushed sands, and the dosage of silica fume, cement and superplasticizer. Several tests were performed such as mechanical strength, shrinkage and a sustainability study to identify the mechanisms that govern the behavior of these new concretes. The results showed that the crushed sand is a very promising material; it opens up great horizons to optimize VHPC in Algeria, since it provides good compactness, better mechanical performance, very good different behavior and excellent sustainability indicators when combined with rolled sand.

  19. Climate change and sugarcane expansion increase Hantavirus infection risk.

    Science.gov (United States)

    Prist, Paula Ribeiro; Uriarte, María; Fernandes, Katia; Metzger, Jean Paul

    2017-07-01

    Hantavirus Cardiopulmonary Syndrome (HCPS) is a disease caused by Hantavirus, which is highly virulent for humans. High temperatures and conversion of native vegetation to agriculture, particularly sugarcane cultivation can alter abundance of rodent generalist species that serve as the principal reservoir host for HCPS, but our understanding of the compound effects of land use and climate on HCPS incidence remains limited, particularly in tropical regions. Here we rely on a Bayesian model to fill this research gap and to predict the effects of sugarcane expansion and expected changes in temperature on Hantavirus infection risk in the state of São Paulo, Brazil. The sugarcane expansion scenario was based on historical data between 2000 and 2010 combined with an agro-environment zoning guideline for the sugar and ethanol industry. Future evolution of temperature anomalies was derived using 32 general circulation models from scenarios RCP4.5 and RCP8.5 (Representative greenhouse gases Concentration Pathways adopted by IPCC). Currently, the state of São Paulo has an average Hantavirus risk of 1.3%, with 6% of the 645 municipalities of the state being classified as high risk (HCPS risk ≥ 5%). Our results indicate that sugarcane expansion alone will increase average HCPS risk to 1.5%, placing 20% more people at HCPS risk. Temperature anomalies alone increase HCPS risk even more (1.6% for RCP4.5 and 1.7%, for RCP8.5), and place 31% and 34% more people at risk. Combined sugarcane and temperature increases led to the same predictions as scenarios that only included temperature. Our results demonstrate that climate change effects are likely to be more severe than those from sugarcane expansion. Forecasting disease is critical for the timely and efficient planning of operational control programs that can address the expected effects of sugarcane expansion and climate change on HCPS infection risk. The predicted spatial location of HCPS infection risks obtained here can be

  20. Climate change and sugarcane expansion increase Hantavirus infection risk.

    Directory of Open Access Journals (Sweden)

    Paula Ribeiro Prist

    2017-07-01

    Full Text Available Hantavirus Cardiopulmonary Syndrome (HCPS is a disease caused by Hantavirus, which is highly virulent for humans. High temperatures and conversion of native vegetation to agriculture, particularly sugarcane cultivation can alter abundance of rodent generalist species that serve as the principal reservoir host for HCPS, but our understanding of the compound effects of land use and climate on HCPS incidence remains limited, particularly in tropical regions. Here we rely on a Bayesian model to fill this research gap and to predict the effects of sugarcane expansion and expected changes in temperature on Hantavirus infection risk in the state of São Paulo, Brazil. The sugarcane expansion scenario was based on historical data between 2000 and 2010 combined with an agro-environment zoning guideline for the sugar and ethanol industry. Future evolution of temperature anomalies was derived using 32 general circulation models from scenarios RCP4.5 and RCP8.5 (Representative greenhouse gases Concentration Pathways adopted by IPCC. Currently, the state of São Paulo has an average Hantavirus risk of 1.3%, with 6% of the 645 municipalities of the state being classified as high risk (HCPS risk ≥ 5%. Our results indicate that sugarcane expansion alone will increase average HCPS risk to 1.5%, placing 20% more people at HCPS risk. Temperature anomalies alone increase HCPS risk even more (1.6% for RCP4.5 and 1.7%, for RCP8.5, and place 31% and 34% more people at risk. Combined sugarcane and temperature increases led to the same predictions as scenarios that only included temperature. Our results demonstrate that climate change effects are likely to be more severe than those from sugarcane expansion. Forecasting disease is critical for the timely and efficient planning of operational control programs that can address the expected effects of sugarcane expansion and climate change on HCPS infection risk. The predicted spatial location of HCPS infection risks

  1. Reduced Renshaw Recurrent Inhibition after Neonatal Sciatic Nerve Crush in Rats

    Directory of Open Access Journals (Sweden)

    Liang Shu

    2014-01-01

    Full Text Available Renshaw recurrent inhibition (RI plays an important gated role in spinal motion circuit. Peripheral nerve injury is a common disease in clinic. Our current research was designed to investigate the change of the recurrent inhibitory function in the spinal cord after the peripheral nerve crush injury in neonatal rat. Sciatic nerve crush was performed on 5-day-old rat puppies and the recurrent inhibition between lateral gastrocnemius-soleus (LG-S and medial gastrocnemius (MG motor pools was assessed by conditioning monosynaptic reflexes (MSR elicited from the sectioned dorsal roots and recorded either from the LG-S and MG nerves by antidromic stimulation of the synergist muscle nerve. Our results demonstrated that the MSR recorded from both LG-S or MG nerves had larger amplitude and longer latency after neonatal sciatic nerve crush. The RI in both LG-S and MG motoneuron pools was significantly reduced to virtual loss (15–20% of the normal RI size even after a long recovery period upto 30 weeks after nerve crush. Further, the degree of the RI reduction after tibial nerve crush was much less than that after sciatic nerve crush indicatig that the neuron-muscle disconnection time is vital to the recovery of the spinal neuronal circuit function during reinnervation. In addition, sciatic nerve crush injury did not cause any spinal motor neuron loss but severally damaged peripheral muscle structure and function. In conclusion, our results suggest that peripheral nerve injury during neonatal early development period would cause a more sever spinal cord inhibitory circuit damage, particularly to the Renshaw recurrent inhibition pathway, which might be the target of neuroregeneration therapy.

  2. Sugar-cane juice induces pectin lyase and polygalacturonase in Penicillium griseoroseum

    Directory of Open Access Journals (Sweden)

    Minussi Rosana Cristina

    1998-01-01

    Full Text Available The use of other inducers as substitutes for pectin was studied aiming to reduce the production costs of pectic enzymes. The effects of sugar-cane juice on the production of pectin lyase (PL and polygalacturonase (PG by Penicillium griseoroseum were investigated. The fungus was cultured in a mineral medium (pH 6.3 in a rotary shaker (150 rpm for 48 h at 25oC. Culture media were supplemented with yeast extract and sucrose or sugar-cane juice. Sugar-cane juice added singly to the medium promoted higher PL activity and mycelial dry weight when compared to pectin and the use of sugar-cane juice and yeast extract yielded levels of PG activity that were similar to those obtained with sucrose-yeast extract or pectin. The results indicated that, even at low concentrations, sugar-cane juice was capable of inducing pectin lyase and polygalacturonase with no cellulase activity in P. griseoroseum.

  3. Sugarcane maturity estimation through edaphic-climatic parameters

    Directory of Open Access Journals (Sweden)

    Scarpari Maximiliano Salles

    2004-01-01

    Full Text Available Sugarcane (Saccharum officinarum L. grows under different weather conditions directly affecting crop maturation. Raw material quality predicting models are important tools in sugarcane crop management; the goal of these models is to provide productivity estimates during harvesting, increasing the efficiency of strategical and administrative decisions. The objective of this work was developing a model to predict Total Recoverable Sugars (TRS during harvesting, using data related to production factors such as soil water storage and negative degree-days. The database of a sugar mill for the crop seasons 1999/2000, 2000/2001 and 2001/2002 was analyzed, and statistical models were tested to estimate raw material. The maturity model for a one-year old sugarcane proved to be significant, with a coefficient of determination (R² of 0.7049*. No differences were detected between measured and estimated data in the simulation (P < 0.05.

  4. Rumen dry matter degradability of fresh and ensiled sugarcane ...

    African Journals Online (AJOL)

    This study aimed to evaluate the chemical composition and in situ ruminal degradability of fresh (FSC) and ensiled (ESC) sugarcane. In situ dry matter degradability (DMD) was determined using the nylon bag technique with four cows equipped ruminal fistulas. Cows were fed with fresh or ensiled sugarcane and ...

  5. The political organization of sugarcane production in Western Mexico

    NARCIS (Netherlands)

    Guzman - Flores, E.

    1995-01-01

    The strike of CNC sugarcane producers and the immediate response by the refinery administration are a good example of the ongoing political negotiations between the main actors involved in the organization of sugarcane production in the Valley of Autlán-El Grullo. I introduced in Chapter I

  6. Soil carbon, nitrogen and phosphorus changes under sugarcane expansion in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Franco, André L.C., E-mail: andrefranco@usp.br [Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000 Piracicaba, SP (Brazil); Cherubin, Maurício R. [Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000 Piracicaba, SP (Brazil); Pavinato, Paulo S.; Cerri, Carlos E.P. [Department of Soil Science, “Luiz de Queiroz” College of Agriculture, University of São Paulo, Av. Pádua Dias 11, 13418-900 Piracicaba, SP (Brazil); Six, Johan [Department of Environmental Systems Science, ETH Zurich, Tannenstrasse 1, 8092 Zurich (Switzerland); Davies, Christian A. [Shell Technology Centre Houston, 3333 Highway 6 South, Houston, TX 77082 (United States); Cerri, Carlos C. [Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000 Piracicaba, SP (Brazil)

    2015-05-15

    Historical data of land use change (LUC) indicated that the sugarcane expansion has mainly displaced pasture areas in Central–Southern Brazil, globally the largest producer, and that those pastures were prior established over native forests in the Cerrado biome. We sampled 3 chronosequences of land use comprising native vegetation (NV), pasture (PA), and sugarcane crop (SC) in the sugarcane expansion region to assess the effects of LUC on soil carbon, nitrogen, and labile phosphorus pools. Thirty years after conversion of NV to PA, we found significant losses of original soil organic matter (SOM) from NV, while insufficient new organic matter was introduced from tropical grasses into soil to offset the losses, reflecting in a net C emission of 0.4 Mg ha{sup −1} yr{sup −1}. These findings added to decreases in {sup 15}N signal indicated that labile portions of SOM are preserved under PA. Afterwards, in the firsts five years after LUC from PA to SC, sparse variations were found in SOM levels. After more than 20 years of sugarcane crop, however, there were losses of 40 and 35% of C and N stocks, respectively, resulting in a rate of C emission of 1.3 Mg ha{sup −1} yr{sup −1} totally caused by the respiration of SOM from C4-cycle plants. In addition, conversion of pastures to sugarcane mostly increased {sup 15}N signal, indicating an accumulation of more recalcitrant SOM under sugarcane. The microbe- and plant-available P showed site-specific responses to LUC as a function of different P-input managements, with the biological pool mostly accounting for more than 50% of the labile P in both anthropic land uses. With the projections of 6.4 Mha of land required by 2021 for sugarcane expansion in Brazil to achieve ethanol's demand, this explanatory approach to the responses of SOM to LUC will contribute for an accurate assessment of the CO{sub 2} balance of sugarcane ethanol. - Highlights: • An explanatory approach to the responses of soil C, N and P to

  7. Soil carbon, nitrogen and phosphorus changes under sugarcane expansion in Brazil

    International Nuclear Information System (INIS)

    Franco, André L.C.; Cherubin, Maurício R.; Pavinato, Paulo S.; Cerri, Carlos E.P.; Six, Johan; Davies, Christian A.; Cerri, Carlos C.

    2015-01-01

    Historical data of land use change (LUC) indicated that the sugarcane expansion has mainly displaced pasture areas in Central–Southern Brazil, globally the largest producer, and that those pastures were prior established over native forests in the Cerrado biome. We sampled 3 chronosequences of land use comprising native vegetation (NV), pasture (PA), and sugarcane crop (SC) in the sugarcane expansion region to assess the effects of LUC on soil carbon, nitrogen, and labile phosphorus pools. Thirty years after conversion of NV to PA, we found significant losses of original soil organic matter (SOM) from NV, while insufficient new organic matter was introduced from tropical grasses into soil to offset the losses, reflecting in a net C emission of 0.4 Mg ha −1 yr −1 . These findings added to decreases in 15 N signal indicated that labile portions of SOM are preserved under PA. Afterwards, in the firsts five years after LUC from PA to SC, sparse variations were found in SOM levels. After more than 20 years of sugarcane crop, however, there were losses of 40 and 35% of C and N stocks, respectively, resulting in a rate of C emission of 1.3 Mg ha −1 yr −1 totally caused by the respiration of SOM from C4-cycle plants. In addition, conversion of pastures to sugarcane mostly increased 15 N signal, indicating an accumulation of more recalcitrant SOM under sugarcane. The microbe- and plant-available P showed site-specific responses to LUC as a function of different P-input managements, with the biological pool mostly accounting for more than 50% of the labile P in both anthropic land uses. With the projections of 6.4 Mha of land required by 2021 for sugarcane expansion in Brazil to achieve ethanol's demand, this explanatory approach to the responses of SOM to LUC will contribute for an accurate assessment of the CO 2 balance of sugarcane ethanol. - Highlights: • An explanatory approach to the responses of soil C, N and P to sugarcane expansion is provided.

  8. Large-Scale Transcriptome Analysis of Two Sugarcane Genotypes Contrasting for Lignin Content.

    Directory of Open Access Journals (Sweden)

    Renato Vicentini

    Full Text Available Sugarcane is an important crop worldwide for sugar and first generation ethanol production. Recently, the residue of sugarcane mills, named bagasse, has been considered a promising lignocellulosic biomass to produce the second-generation ethanol. Lignin is a major factor limiting the use of bagasse and other plant lignocellulosic materials to produce second-generation ethanol. Lignin biosynthesis pathway is a complex network and changes in the expression of genes of this pathway have in general led to diverse and undesirable impacts on plant structure and physiology. Despite its economic importance, sugarcane genome was still not sequenced. In this study a high-throughput transcriptome evaluation of two sugarcane genotypes contrasting for lignin content was carried out. We generated a set of 85,151 transcripts of sugarcane using RNA-seq and de novo assembling. More than 2,000 transcripts showed differential expression between the genotypes, including several genes involved in the lignin biosynthetic pathway. This information can give valuable knowledge on the lignin biosynthesis and its interactions with other metabolic pathways in the complex sugarcane genome.

  9. Feed Technology of Fibrous Sugarcane Residues for Ruminants

    Directory of Open Access Journals (Sweden)

    Kuswandi

    2007-06-01

    Full Text Available Abundant sugarcane residue during shortage of roughage in dry season gives an opportunity to raise ruminants around sugarcane industries. However, these products are not widely used by farmers due to an assumption that the usage is inefficient and that the feed utilization technology is not widely recognized. Sugarcane fibrous residues (tops, bagasse and pith may be a potential feed component if pre-treated to increase its digestion and consumption by the animal, and/or supplemented by other ingredients to balance nutrients in the rumen as well as those for production purpose. Digestibility can be increased by chemical treatments such as ammoniation and other alkaline treatments, whereas consumption can be increased by physical treatments such as grinding, hammermilling or pelleting. Nutrients that are missing in these fibrous residues can be provided by addition of urea, molasses and minerals for maintenance need, and bypass nutrients (carbohydrates, protein and fats that are digested in the small intestine and available for tissue or milk synthesis. There are three options for development of livestock agribusiness based on fibrous sugarcane residues; however, these require several technologies to optimize the utilization of these residues.

  10. Preparation-induced errors in EPR dosimetry of enamel: pre- and post-crushing sensitivity

    International Nuclear Information System (INIS)

    Haskell, E.H.; Hayes, R.B.; Kenner, G.H.

    1996-01-01

    Errors in dose estimation as a function of grain size for tooth enamel has been previously shown for beta irradiation after crushing. We tested the effect of gamma radiation applied to specimens before and after crushing. We extend the previous work in that we found that post-crushing irradiation altered the slope of the dose-response curve of the hydroxyapatite signal and produced a grain-size dependent offset. No changes in the slope of the dose-response curve were seen in enamel caps irradiated before crushing

  11. Isolation and screening of glycolipid biosurfactant producers from sugarcane.

    Science.gov (United States)

    Morita, Tomotake; Fukuoka, Tokuma; Imura, Tomohiro; Hirose, Naoto; Kitamoto, Dai

    2012-01-01

    Forty-three fungal producers for glycolipid biosurfactants, mannosylerythritol lipids (MELs), were isolated from leaves and smuts of sugarcane plants. These isolates produced MELs with sugarcane juice as nutrient source. The strains were taxonomically categorized into the genera Pseudozyma and Ustilago on the basis of partial sequences of the ribosomal RNA gene.

  12. Investigation on Compressive Strength of Special Concrete made with Crushed Waste Glass

    Directory of Open Access Journals (Sweden)

    Mohd Sani Mohd Syahrul Hisyam

    2015-01-01

    Full Text Available Special concrete is the type of concrete that produced by using waste material or using unusual techniques/method of preparation. Special concrete made with waste material is becoming popular in a construction site. This is because the special concrete is selected due to quality, integrity, economic factor and environmental factor. The waste glass is selected as an additional material to provide a good in compressive strength value. The compressive strength is the importance of mechanical properties of concrete and typically the concrete is sustained and stiffed in compression load. The significant issue to utilize the waste glass from the automotive windscreen is to improve the strength of concrete. The waste glass is crushed to become 5 mm size and recognised as crushed waste glass that be used in concrete as additional material. The main objective of the study is to determine the appropriate percentage of crushed waste glass in concrete grade, 30 in order to enhance the compressive strength. There are four mixes of concrete that contained of crushed waste glass with percentage of 2 %, 4 %, 6 % and 8 % and one control mix with 0 % of crushed waste glass. As the result, crushed waste glass with an additional 4 % in concrete is reported having a higher value of compressive strength in early and mature stage. In addition, if the percentage of crushed glass wastes in concrete increases and it leads to a reduction in the workability of concrete.

  13. Behavior of crushed rock aggregates used in road construction exposed to cold climate conditions

    Science.gov (United States)

    Kuznetsova, Elena; Pérez Fortes, Ana Patricia; Anastasio, Sara; Willy Danielsen, Svein

    2016-04-01

    Presently, about 90% of the aggregate production in Europe comes from naturally occurring resources: quarries and pits. Due to the increased demand for sand and gravel for construction purposes, not only in building but also in road construction, the last decade has seen a significant trend towards the use of more crushed rock aggregates. This resource has been more and more preferred to sand and gravel thanks to the significant technological development of its process and use phase. The performance of the aggregates is generally evaluated depending on three main factors: the geological origin (mineral composition, texture, structure, degree of weathering), the aggregate processing (crushing, sieving, washing, storing) and the user technology for a specific area of use (e.g. road construction, asphalt binders). Nevertheless climatic conditions should carefully be taken into account in application such as road construction. Large temperature gradients and high levels of humidity are known to significantly affect the performance of the material. Although the problem is, at least in the asphalt field, considered mostly from the binder point of view, this article aims to investigate the effect of aggregate properties on road performance in cold climatic conditions. Two different climatic areas will be taken into account: Norway and Spain. While both these countries are listed among the main European producers of aggregates, they represent significantly different climatic regions. While Norwegian weather is characterized by humid cold winters and relatively mild summers, Spain has temperate climate with cold regions in mountainous and internal areas. Both countries have been significantly affected by climate change with increasing temperature variations and instability. At the same time, similar winter maintenance measures, including the use of a considerable amount of solid and liquid chemicals to avoid ice formation (e.g. NaCl) and/or to provide better friction, are

  14. Persistence of Selected Pesticides used in Sugarcane Production in ...

    African Journals Online (AJOL)

    This study was conducted to monitor pesticide levels in soils and runoff water following treatment of a sugarcane field in the Northern Lake Victoria watershed. Soil and water samples were collected over a period of 304 days after planting of the sugarcane and analysed for pesticide residues. In soils, glyphosate levels ...

  15. Identification of virus isolates inducing mosaic of sugarcane in ...

    African Journals Online (AJOL)

    SAM

    2014-03-19

    Mar 19, 2014 ... (JGMV), maize dwarf mosaic virus (MDMV) and sorghum mosaic Virus (SrMV) is an economically important viral disease of sugarcane ... race (“Bahausa”) and the least infected was the white land race (“fararkwama”). ... stripes symptoms on leaf blade and white stripe on stem in infected sugarcane and are ...

  16. Optimized Subsurface Irrigation System: The Future of Sugarcane Irrigation

    Directory of Open Access Journals (Sweden)

    M. H. J. P. Gunarathna

    2018-03-01

    Full Text Available Climate change may harm the growth and yield of sugarcane (Saccharum officinarum L. without the introduction of appropriate irrigation facilities. Therefore, new irrigation methods should be developed to maximize water use efficiency and reduce operational costs. OPSIS (optimized subsurface irrigation system is a new solar-powered automatic subsurface irrigation system that creates a phreatic zone below crop roots and relies on capillarity to supply water to the root zone. It is designed for upland crops such as sugarcane. We investigated the performance of OPSIS for irrigating sugarcane and evaluated its performance against sprinkler irrigation under subtropical conditions. We conducted field experiments in Okinawa, Japan, over the period from 2013 to 2016 and took measurements during spring- and summer-planted main crops and two ratoon crops of the spring-planted crop. Compared with sprinkler irrigation, OPSIS produced a significantly higher fresh cane yield, consumed less irrigation water and provided a higher irrigation water use efficiency. We conclude that OPSIS could be adopted as a sustainable solution to sugarcane irrigation in Okinawa and similar environments.

  17. Assessment of Clinical Practices for Crushing Medication in Geriatric Units.

    Science.gov (United States)

    Fodil, M; Nghiem, D; Colas, M; Bourry, S; Poisson-Salomon, A-S; Rezigue, H; Trivalle, C

    2017-01-01

    To assess the modification of the form of medication and evaluate staff observance of good clinical practices. One-day assessment of clinical practices. 17 geriatrics units in the 3 Teaching Hospitals of Paris-Sud (APHP), France. Elderly in-patients with difficulties swallowing capsules and tablets. Assessment of target-patient prescriptions and direct observation of nurses' medical rounds. 155/526 in-patients (29.5%) were unable to swallow tablets or capsules: 98 (40.3%) in long-term care, 46 patients (23.8%) in the rehabilitation unit and 11 (12.2%) in the acute care unit (p = .005). In thirty-nine (27.3%) of the 143 prescriptions studied all tablets were safe to crush and all capsules were safe to open. In 104 cases, at least one medication could not be safely modified, including 26 cases (18.2%) in which none of the prescribed drugs were safe to crush or open. In 48.2% of the 110 medications that were crushed, crushing was forbidden, and presented a potential threat in 12.7% of cases or a reduced efficacy in 8.2% of cases. Crushing methods were rarely appropriate: no specific protective equipment was used (81.8%), crushing equipment was shared between patients without cleaning (95.1%), medications were spilled or lost (69.9%). The method of administration was appropriate (water, jellified water) in 25% of the cases, questionable (soup, coffee, compote, juice, cream) in 55% of the cases and unacceptable (laxative) in 21% of the cases. Management of drug prescriptions in patients with swallowing difficulties is not optimal, and may even have iatrogenic effects. In this study, 12.7% of the modifications of the drug form could have been harmful. Doctors, pharmacists and nurses need to reevaluate their practices.

  18. Application of radiation processing to produce biotic elicitor for sugarcane in Vietnam

    International Nuclear Information System (INIS)

    Nguyen, Quoc Hien; Tran, Tich Canh; Truong, Thi Hanh; Vo, Thi Kim Lang; Dang, Van Phu; Cao, Anh Duong

    2007-01-01

    Sugarcane is the main raw material for production of sugar and ethanol. In Vietnam, it was reported in 1998 that the area for sugarcane growth was about 257,000ha. Up to now, the biotic elicitor, oligosaccharide has not been used for sugarcane yet. This study has been carried out to investigate the elicitation and the growth promotion effect of irradiated chitosan (oligochitosan) for sugarcane. The field test results indicated that alpha chitosan (shrimp shell) and beta chitosan (squid pen) samples with the content of water soluble oligomer of about 70% were the most effective. The disease ratio of sugarcane tree-trunk treated with irradiated chitosan before harvesting time decreased to 30-40% compared to non-treated one (100%). In addition, the productivity of sugarcane increased to about 20%. The combination of metal ion (Zn ++ , Cu ++ ) with oligochitosan did not show the synergic elicitation effect. The results revealed that biotic elicitor made from chitosan by radiation degradation method is very promising for field application not only for protection of disease infection but also for growth promotion of plants. It is believed that this biotic elicitor could be largely used for safe and sustainable development of agriculture. (author)

  19. Sugarcane outgrowers in Ethiopia

    DEFF Research Database (Denmark)

    Assefa Wendimu, Mengistu; Henningsen, Arne; Gibbon, Peter

    smallholders. We apply matching methods to analyze the effects of a public sugarcane outgrower scheme in Ethiopia. Participation in the outgrower scheme significantly reduces the income and asset stocks of outgrowers who contributed irrigated land to the outgrower scheme, while the effect was insignificant...

  20. POOR FERTILITY, SHORT LONGEVITY AND LOW ABUNDANCE IN THE SOIL SEED BANK LIMIT VOLUNTEER SUGARCANE FROM SEED

    Directory of Open Access Journals (Sweden)

    Johann S Pierre

    2015-06-01

    Full Text Available The recent development of genetically modified sugarcane, with the aim of commercial production, requires an understanding of the potential risks of increased weediness of sugarcane as a result of spread and persistence of volunteer sugarcane. As sugarcane is propagated vegetatively from pieces of stalk and the seed plays no part in the production cycle the fate of seed in the environment is yet to be studied. In this study sugarcane seed samples, collected in fields over a two year period, were used to determine the overall level of sugarcane fertility, seed dormancy and longevity of seed under field conditions. A survey of the soil seed bank in and around sugarcane fields was used to quantify the presence of sugarcane seeds and to identify and quantify the weeds that would compete with sugarcane seedlings. We demonstrated that under field conditions, sugarcane has low fertility and produces non-dormant seed. The viability of the seeds decayed rapidly (half life between 1.5 and 2.1 months. This means that, in Australia, sugarcane seeds die before they encounter climatic conditions that could allow them to germinate and establish. Finally, the soil seed bank analysis revealed there were very few sugarcane seeds relative to the large number of weed seeds that exert a large competitive effect. In conclusion, low fertility, short persistence and poor ability to compete limit the capacity of sugarcane seed spread and persistence in the environment.

  1. Poor Fertility, Short Longevity, and Low Abundance in the Soil Seed Bank Limit Volunteer Sugarcane from Seed.

    Science.gov (United States)

    Pierre, Johann S; Perroux, Jai; Whan, Alex; Rae, Anne L; Bonnett, Graham D

    2015-01-01

    The recent development of genetically modified sugarcane, with the aim of commercial production, requires an understanding of the potential risks of increased weediness of sugarcane as a result of spread and persistence of volunteer sugarcane. As sugarcane is propagated vegetatively from pieces of stalk and the seed plays no part in the production cycle, the fate of seed in the environment is yet to be studied. In this study, sugarcane seed samples, collected in fields over a 2-year period, were used to determine the overall level of sugarcane fertility, seed dormancy, and longevity of seed under field conditions. A survey of the soil seed bank in and around sugarcane fields was used to quantify the presence of sugarcane seeds and to identify and quantify the weeds that would compete with sugarcane seedlings. We demonstrated that under field conditions, sugarcane has low fertility and produces non-dormant seed. The viability of the seeds decayed rapidly (half-life between 1.5 and 2.1 months). This means that, in Australia, sugarcane seeds die before they encounter climatic conditions that could allow them to germinate and establish. Finally, the soil seed bank analysis revealed that there were very few sugarcane seeds relative to the large number of weed seeds that exert a large competitive effect. In conclusion, low fertility, short persistence, and poor ability to compete limit the capacity of sugarcane seed spread and persistence in the environment.

  2. Biomass of cocoa and sugarcane

    Science.gov (United States)

    Siswanto; Sumanto; Hartati, R. S.; Prastowo, B.

    2017-05-01

    The role of the agricultural sector is very important as the upstream addressing downstream sectors and national energy needs. The agricultural sector itself is also highly dependent on the availability of energy. Evolving from it then it must be policies and strategies for agricultural development Indonesia to forward particularly agriculture as producers as well as users of biomass energy or bioenergy for national development including agriculture balance with agriculture and food production. Exports of biomass unbridled currently include preceded by ignorance, indifference and the lack of scientific data and potential tree industry in the country. This requires adequate scientific supporting data. This study is necessary because currently there are insufficient data on the potential of biomass, including tree biomasanya detailing the benefits of bioenergy, feed and food is very necessary as a basis for future policy. Measurement of the main estate plants biomass such as cocoa and sugarcane be done in 2015. Measurements were also conducted on its lignocellulose content. Tree biomass sugarcane potential measured consist of leaves, stems and roots, with the weight mostly located on the stem. Nevertheless, not all the potential of the stem is a good raw material for bioethanol. For cocoa turned out leaves more prospective because of its adequate hemicellulose content. For sugarcane, leaf buds contain a good indicator of digestion of feed making it more suitable for feed.

  3. Effect of crushing temperature on virgin olive oil quality and composition

    Directory of Open Access Journals (Sweden)

    Ö. Kula

    2018-03-01

    Full Text Available The objective of the current study was to assess the influence of a modified crushing process and kneading operation on the quality parameters, volatile compounds, and the fatty acid and sterol profiles of virgin olive oil from the Edremit yaglik variety. In the study, olive oil samples were produced in two different processes. The first one was produced without malaxation and the second one was produced with the malaxing process. During crushing, the effect of different temperatures was tested. The results demonstrate that different crushing temperatures generally did not affect the amount of free fatty acids, or peroxide value. Total phenol contents were positively affected by the additional malaxation process. Fatty acids and sterol composition were not significantly altered at different crushing temperatures or during the subsequent malaxation application. PCA enabled a clear classification of the oils obtained from different processing techniques.

  4. Influence green sand system by core sand additions

    Directory of Open Access Journals (Sweden)

    N. Špirutová

    2012-01-01

    Full Text Available Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this contribution is: “How the green sand systems are influenced by core sands?”This effect is considered by determination of selected technological properties and degree of green sand system re-bonding. From the studies, which have been published yet, there is not consistent opinion on influence of core sand dilution on green sand system properties. In order to simulation of the effect of core sands on the technological properties of green sands, there were applied the most common used technologies of cores production, which are based on bonding with phenolic resin. Core sand concentration added to green sand system, was up to 50 %. Influence of core sand dilution on basic properties of green sand systems was determined by evaluation of basic industrial properties: moisture, green compression strength and splitting strength, wet tensile strength, mixture stability against staling and physical-chemistry properties (pH, conductivity, and loss of ignition. Ratio of active betonite by Methylene blue test was also determined.

  5. Soil carbon, nitrogen and phosphorus changes under sugarcane expansion in Brazil.

    Science.gov (United States)

    Franco, André L C; Cherubin, Maurício R; Pavinato, Paulo S; Cerri, Carlos E P; Six, Johan; Davies, Christian A; Cerri, Carlos C

    2015-05-15

    Historical data of land use change (LUC) indicated that the sugarcane expansion has mainly displaced pasture areas in Central-Southern Brazil, globally the largest producer, and that those pastures were prior established over native forests in the Cerrado biome. We sampled 3 chronosequences of land use comprising native vegetation (NV), pasture (PA), and sugarcane crop (SC) in the sugarcane expansion region to assess the effects of LUC on soil carbon, nitrogen, and labile phosphorus pools. Thirty years after conversion of NV to PA, we found significant losses of original soil organic matter (SOM) from NV, while insufficient new organic matter was introduced from tropical grasses into soil to offset the losses, reflecting in a net C emission of 0.4 Mg ha(-1)yr(-1). These findings added to decreases in (15)N signal indicated that labile portions of SOM are preserved under PA. Afterwards, in the firsts five years after LUC from PA to SC, sparse variations were found in SOM levels. After more than 20 years of sugarcane crop, however, there were losses of 40 and 35% of C and N stocks, respectively, resulting in a rate of C emission of 1.3 Mg ha(-1)yr(-1) totally caused by the respiration of SOM from C4-cycle plants. In addition, conversion of pastures to sugarcane mostly increased (15)N signal, indicating an accumulation of more recalcitrant SOM under sugarcane. The microbe- and plant-available P showed site-specific responses to LUC as a function of different P-input managements, with the biological pool mostly accounting for more than 50% of the labile P in both anthropic land uses. With the projections of 6.4 Mha of land required by 2021 for sugarcane expansion in Brazil to achieve ethanol's demand, this explanatory approach to the responses of SOM to LUC will contribute for an accurate assessment of the CO₂ balance of sugarcane ethanol. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Sugarcane Aphid in Sorghum

    Science.gov (United States)

    Evers, Logan

    2018-01-01

    This article is intended for readers in the production agriculture industry who deal with grain sorghum throughout the growing season. This publication will discuss the impacts of the sugarcane aphid in various crops and the ways to manage and identify them as they continue to advance north.

  7. Evaluation of constitutive models for crushed salt

    International Nuclear Information System (INIS)

    Callahan, G.D.; Loken, M.C.; Hurtado, L.D.; Hansen, F.D.

    1996-01-01

    Three constitutive models are recommended as candidates for describing the deformation of crushed salt. These models are generalized to three-dimensional states of stress to include the effects of mean and deviatoric stress and modified to include effects of temperature, grain size, and moisture content. A database including hydrostatic consolidation and shear consolidation tests conducted on Waste Isolation Pilot Plant (WIPP) and southeastern New Mexico salt is used to determine material parameters for the models. To evaluate the capability of the models, parameter values obtained from fitting the complete database are used to predict the individual tests. Finite element calculations of a WIPP shaft with emplaced crushed salt demonstrate the model predictions

  8. Production of Citric Acid from Solid State Fermentation of Sugarcane ...

    African Journals Online (AJOL)

    Aspergillus niger is the leading microorganism of choice for citric acid production. Sugarcane waste was used as substrate under solid state fermentation to comparatively evaluate the citric acid production capacity of Aspergillus niger isolates and the indigenous microflora in the sugarcane waste. Known optimal cultural ...

  9. Potential of diazotrophic bacteria associated with sugarcane for energycane production

    Science.gov (United States)

    Crosses between sugarcane and wild species of Saccharum and other closely related genera are made to introgress new genes from the wild species into sugarcane. Characteristics of the progeny from these crosses may include increased biomass and the ability to be grown in a broader geographical range ...

  10. The sugarcane-biofuel expansion and dairy farmers' responses in Brazil

    NARCIS (Netherlands)

    Monteiro Novo, A.L.; Jansen, K.; Slingerland, M.A.

    2012-01-01

    The expansion of sugarcane for biofuels is a highly contentious issue. The growth of sugarcane area has occurred simultaneously with a reduction of dairy production in São Paulo state, the primary production region for sugar and ethanol in Brazil. This paper analyses different dairy farm rationales

  11. Louisiana sugarcane entomology: A look at the back and a peek at the future

    Science.gov (United States)

    Controlling insect pests is an important consideration for sugarcane farmers seeking to minimize losses and maximize profits. Research in managing insects has been conducted for almost as long as sugarcane has been grown in Louisiana. This presentation reviews Louisiana sugarcane entomology from the...

  12. Physical-chemical and microbiological changes in Cerrado Soil under differing sugarcane harvest management systems

    NARCIS (Netherlands)

    Rachid, Caio T. C. C.; Piccolo, Marisa C.; Leite, Deborah Catharine A.; Balieiro, Fabiano C.; Coutinho, Heitor Luiz C.; van Elsas, Jan Dirk; Peixoto, Raquel S.; Rosado, Alexandre S.

    2012-01-01

    Background: Sugarcane cultivation plays an important role in Brazilian economy, and it is expanding fast, mainly due to the increasing demand for ethanol production. In order to understand the impact of sugarcane cultivation and management, we studied sugarcane under different management regimes

  13. The effect of motorcycle helmet fit on estimating head impact kinematics from residual liner crush.

    Science.gov (United States)

    Bonin, Stephanie J; Gardiner, John C; Onar-Thomas, Arzu; Asfour, Shihab S; Siegmund, Gunter P

    2017-09-01

    Proper helmet fit is important for optimizing head protection during an impact, yet many motorcyclists wear helmets that do not properly fit their heads. The goals of this study are i) to quantify how a mismatch in headform size and motorcycle helmet size affects headform peak acceleration and head injury criteria (HIC), and ii) to determine if peak acceleration, HIC, and impact speed can be estimated from the foam liner's maximum residual crush depth or residual crush volume. Shorty-style helmets (4 sizes of a single model) were tested on instrumented headforms (4 sizes) during linear impacts between 2.0 and 10.5m/s to the forehead region. Helmets were CT scanned to quantify residual crush depth and volume. Separate linear regression models were used to quantify how the response variables (peak acceleration (g), HIC, and impact speed (m/s)) were related to the predictor variables (maximum crush depth (mm), crush volume (cm 3 ), and the difference in circumference between the helmet and headform (cm)). Overall, we found that increasingly oversized helmets reduced peak headform acceleration and HIC for a given impact speed for maximum residual crush depths less than 7.9mm and residual crush volume less than 40cm 3 . Below these levels of residual crush, we found that peak headform acceleration, HIC, and impact speed can be estimated from a helmet's residual crush. Above these crush thresholds, large variations in headform kinematics are present, possibly related to densification of the foam liner during the impact. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Mitigating the Health Risks of Stone Quarrying and Crushing in India ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Safety and health in the stone crushing industry : a practical manual for preventing accidents preserving health and keeping a company profitable. Études. Abstract for oral presentation : addressing health risk of communities residing close to stone quarrying and crushing unit using ecohealth framework in Central India.

  15. 49 CFR 587.15 - Verification of aluminum honeycomb crush strength.

    Science.gov (United States)

    2010-10-01

    ... analog or digital form for each sample tested. If analog data are collected, a means of converting the data to digital data must be made available. All digital data are collected at a rate consistent with... all data prior to 6.4 mm (0.25 in) of crush and after 16.5 mm (0.65 in) of crush. Divide the remaining...

  16. Sugarcane exergy calculation; Calculo de la exergia de la cana de azucar

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez P, Maria I.; Nebra P, Silvia A. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia]. E-mails: mariai@fem.unicamp.br.; sanebra@fem.unicamp.br; Martinez R, Arnaldo [Universidade de Oriente, Santiago de Cuba (Cuba). Facultad de Ingenieria Mecanica. Centro de Estudios de Refrigeracion Luis Fernando Brossard Perez]. E-mail: arnaldo@fim.ceefe.uo.edu.cu

    2000-07-01

    This paper presents a sugarcane exergy calculation, carried out considering the material as constituted by dry fiber and juice, being the last one that includes all the sucrose and water present in sugarcane. The variation intervals of sugarcane chemical composition and consequently the chemical composition of fibre and juice were obtained from a bibliography research. the finals results show that, the fibre exergy, as was considered totally dry and without sucrose, is a function of it chemical composition only. The quotient between the exergy and low calorific value has a middle value of 1,14 and the middle value of it exergy was 2329 kJ/kg of cane. Based on the environmental reference proposed by Szargut for the sugarcane juice exergy determination, it was obtained that the mixture component of the juice exergy has no piratical influence in the total exergy juice value, being the value of the reactive exergy component the determining of a middle value of sugarcane juice exergy of 2814,25 kJ/kg of juice and 2380Kj/Kg of cane. The sugarcane exergy value obtained for 8-18% of fiber, 75-82% of water and 14.5-22% of sucrose was 4709Kj/kg of cane. (author)

  17. Thermal conductivity of crushed salt

    International Nuclear Information System (INIS)

    Kuehn, K.

    Heat transfer through an annular space filled with crushed salt depends primarily on the thermal conductivity, lambda, of the material. This report gives a formula with which lambda can be computed. The formula includes two quantities that can be influenced through screening of the salt smalls: the porosity, psi, and the fraction, alpha, of the more highly resistive heat-flow paths. The report computes and presents graphically the thermal conductivities for various values of psi and alpha. Heat-transfer properties are computed and compared for an annular space filled with crushed salt and for an air gap. The comparison shows that the properties of the annular space are larger only up to a certain temperature, because the properties of the air gap increase exponentially while those f the annular space increase only in an approximately linear way. Experimental results from Project Salt Vault in the U.S. are in good agreement with the calculations performed. Trials in Temperature Experimental Field 2 at the Asse II salt mine will provide an additional check on the calculations. 3 figures, 3 tables

  18. The Branding of Sugarcane Juice in India

    Directory of Open Access Journals (Sweden)

    R. Sinha

    2014-06-01

    Full Text Available Sugarcane juice is traditionally sold in India by roadside vendors, often in unhygienic conditions. That’s why a few entrepreneurs have taken the initiative venturing into the marketing of branded sugarcane juice through a chain of franchised outlets. Initial indications are that this model is headed for success. Pune, Kolhapur, more known for its leather chappals, has also been blessed with an abundance of milk, water and sugar, which has made the region the nation's kitchen for many years. The Warana milk producers' cooperative located here has lived up to this reputation. It has been a contract manufacturer for products such as Cadbury's Bournvita, butter for Britannia Industries and Soya milk for Ruchi Soya. Now, the cooperative is preparing to assert its own identity through the launch of Warana Joy, its national brand. Among its new products is sugarcane juice in aseptic packs (Tetra Pak. This article outlines the development of this business; the opportunities and threats faced and also offer suggestions for the growth in this market.

  19. The Branding of Sugarcane Juice in India

    Directory of Open Access Journals (Sweden)

    Rajendra Sinha

    2014-01-01

    Full Text Available Sugarcane juice is traditionally sold in India by roadside vendors, often in unhygienic conditions. That’s why a few entrepreneurs have taken the initiative venturing into the marketing of branded sugarcane juice through a chain of franchised outlets. Initial indications are that this model is headed for success. Pune, Kolhapur, more known for its leather chappals, has also been blessed with an abundance of milk, water and sugar, which has made the region the nation's kitchen for many years. The Warana milk producers' cooperative located here has lived up to this reputation. It has been a contract manufacturer for products such as Cadbury's Bournvita, butter for Britannia Industries and Soya milk for Ruchi Soya. Now, the cooperative is preparing to assert its own identity through the launch of Warana Joy, its national brand. Among its new products is sugarcane juice in aseptic packs (Tetra Pak. This article outlines the development of this business; the opportunities and threats faced and also offer suggestions for the growth in this market.

  20. First report of Sugarcane yellow leaf virus infecting Columbus Grass (Sorghum almum) in Florida

    Science.gov (United States)

    Sugarcane yellow leaf virus (SCYLV) [genus Polerovirus, family Luteoviridae] is the causal agent of sugarcane yellow leaf disease. SCYLV is widespread in Florida where sugarcane was the only known natural host of this virus. During spring 2015, we collected (leaves or stalks) and tested several gras...

  1. RB975242 and RB975201 - Late maturation sugarcane varieties

    Directory of Open Access Journals (Sweden)

    Monalisa Sampaio Carneiro

    2016-11-01

    Full Text Available The sugarcane varieties RB975201 and RB975242 were developed and released for harvest at the end of the season (late maturation in the CentralSouth region of Brazil. In specific environments, these varieties were compared with commercial standards in sugar yield per area. They are resistant to major sugarcane diseases and present the Bru1 gene of resistance to brown rust.

  2. Influence of limestone waste as partial replacement material for sand and marble powder in concrete properties

    Directory of Open Access Journals (Sweden)

    Omar M. Omar

    2012-12-01

    Full Text Available Green concrete are generally composed of recycling materials as hundred or partial percent substitutes for aggregate, cement, and admixture in concrete. Limestone waste is obtained as a by-product during the production of aggregates through the crushing process of rocks in rubble crusher units. Using quarry waste as a substitute of sand in construction materials would resolve the environmental problems caused by the large-scale depletion of the natural sources of river and mining sands. This paper reports the experimental study undertaken to investigate the influence of partial replacement of sand with limestone waste (LSW, with marble powder (M.P as an additive on the concrete properties. The replacement proportion of sand with limestone waste, 25%, 50%, and 75% were practiced in the concrete mixes except in the concrete mix. Besides, proportions of 5%, 10% and 15% marble powder were practiced in the concrete mixes. The effects of limestone waste as fine aggregate on several fresh and hardened properties of the concretes were investigated. The investigation included testing of compressive strength, indirect tensile strength, flexural strength, modulus of elasticity, and permeability. It was found that limestone waste as fine aggregate enhanced the slump test of the fresh concretes. But the unit weight concretes were not affected. However, the good performance was observed when limestone waste as fine aggregate was used in presence of marble powder.

  3. Crush Can Behaviour as an Energy Absorber in a Frontal Impact

    International Nuclear Information System (INIS)

    Bhuyan, Atanu; Ganilova, Olga

    2012-01-01

    The work presented is devoted to the investigation of a state-of-the-art technological solution for the design of a crush-can characterized by optimal energy absorbing properties. The work is focused on the theoretical background of the square tubes, circular tubes and inverbucktube performance under impact with the purpose of design of a novel optimized structure. The main system under consideration is based on the patent US 2008/0185851 A1 and includes a base flange with elongated crush boxes and back straps for stabilization of the crush boxes with the purpose of improvement of the energy-absorbing functionality. The modelling of this system is carried out applying both a theoretical approach and finite element analysis concentrating on the energy absorbing abilities of the crumple zones. The optimization process is validated under dynamic and quasi-static loading conditions whilst considering various modes of deformation and stress distribution along the tubular components. Energy absorbing behaviour of the crush-cans is studied concentrating on their geometrical properties and their diamond or concertina modes of deformation. Moreover, structures made of different materials, steel, aluminium and polymer composites are considered for the material effect analysis and optimization through their combination. Optimization of the crush-can behaviour is done within the limits of the frontal impact scenario with the purpose of improvement of the structural performance in the Euro NCAP tests.

  4. Crush Can Behaviour as an Energy Absorber in a Frontal Impact

    Science.gov (United States)

    Bhuyan, Atanu; Ganilova, Olga

    2012-08-01

    The work presented is devoted to the investigation of a state-of-the-art technological solution for the design of a crush-can characterized by optimal energy absorbing properties. The work is focused on the theoretical background of the square tubes, circular tubes and inverbucktube performance under impact with the purpose of design of a novel optimized structure. The main system under consideration is based on the patent US 2008/0185851 A1 and includes a base flange with elongated crush boxes and back straps for stabilization of the crush boxes with the purpose of improvement of the energy-absorbing functionality. The modelling of this system is carried out applying both a theoretical approach and finite element analysis concentrating on the energy absorbing abilities of the crumple zones. The optimization process is validated under dynamic and quasi-static loading conditions whilst considering various modes of deformation and stress distribution along the tubular components. Energy absorbing behaviour of the crush-cans is studied concentrating on their geometrical properties and their diamond or concertina modes of deformation. Moreover, structures made of different materials, steel, aluminium and polymer composites are considered for the material effect analysis and optimization through their combination. Optimization of the crush-can behaviour is done within the limits of the frontal impact scenario with the purpose of improvement of the structural performance in the Euro NCAP tests.

  5. Signal transduction-related responses to phytohormones and environmental challenges in sugarcane

    Directory of Open Access Journals (Sweden)

    Hemerly Adriana S

    2007-03-01

    Full Text Available Abstract Background Sugarcane is an increasingly economically and environmentally important C4 grass, used for the production of sugar and bioethanol, a low-carbon emission fuel. Sugarcane originated from crosses of Saccharum species and is noted for its unique capacity to accumulate high amounts of sucrose in its stems. Environmental stresses limit enormously sugarcane productivity worldwide. To investigate transcriptome changes in response to environmental inputs that alter yield we used cDNA microarrays to profile expression of 1,545 genes in plants submitted to drought, phosphate starvation, herbivory and N2-fixing endophytic bacteria. We also investigated the response to phytohormones (abscisic acid and methyl jasmonate. The arrayed elements correspond mostly to genes involved in signal transduction, hormone biosynthesis, transcription factors, novel genes and genes corresponding to unknown proteins. Results Adopting an outliers searching method 179 genes with strikingly different expression levels were identified as differentially expressed in at least one of the treatments analysed. Self Organizing Maps were used to cluster the expression profiles of 695 genes that showed a highly correlated expression pattern among replicates. The expression data for 22 genes was evaluated for 36 experimental data points by quantitative RT-PCR indicating a validation rate of 80.5% using three biological experimental replicates. The SUCAST Database was created that provides public access to the data described in this work, linked to tissue expression profiling and the SUCAST gene category and sequence analysis. The SUCAST database also includes a categorization of the sugarcane kinome based on a phylogenetic grouping that included 182 undefined kinases. Conclusion An extensive study on the sugarcane transcriptome was performed. Sugarcane genes responsive to phytohormones and to challenges sugarcane commonly deals with in the field were identified

  6. Estimating Canopy Nitrogen Concentration in Sugarcane Using Field Imaging Spectroscopy

    Directory of Open Access Journals (Sweden)

    Marc Souris

    2012-06-01

    Full Text Available The retrieval of nutrient concentration in sugarcane through hyperspectral remote sensing is widely known to be affected by canopy architecture. The goal of this research was to develop an estimation model that could explain the nitrogen variations in sugarcane with combined cultivars. Reflectance spectra were measured over the sugarcane canopy using a field spectroradiometer. The models were calibrated by a vegetation index and multiple linear regression. The original reflectance was transformed into a First-Derivative Spectrum (FDS and two absorption features. The results indicated that the sensitive spectral wavelengths for quantifying nitrogen content existed mainly in the visible, red edge and far near-infrared regions of the electromagnetic spectrum. Normalized Differential Index (NDI based on FDS(750/700 and Ratio Spectral Index (RVI based on FDS(724/700 are best suited for characterizing the nitrogen concentration. The modified estimation model, generated by the Stepwise Multiple Linear Regression (SMLR technique from FDS centered at 410, 426, 720, 754, and 1,216 nm, yielded the highest correlation coefficient value of 0.86 and Root Mean Square Error of the Estimate (RMSE value of 0.033%N (n = 90 with nitrogen concentration in sugarcane. The results of this research demonstrated that the estimation model developed by SMLR yielded a higher correlation coefficient with nitrogen content than the model computed by narrow vegetation indices. The strong correlation between measured and estimated nitrogen concentration indicated that the methods proposed in this study could be used for the reliable diagnosis of nitrogen quantity in sugarcane. Finally, the success of the field spectroscopy used for estimating the nutrient quality of sugarcane allowed an additional experiment using the polar orbiting hyperspectral data for the timely determination of crop nutrient status in rangelands without any requirement of prior

  7. Protocol optimization for in vitro mass propagation of two sugarcane ...

    African Journals Online (AJOL)

    SAM

    2014-03-19

    Mar 19, 2014 ... The present study was initiated to optimize in vitro protocol for mass propagation of two commercial sugarcane clones (Co 449 and Co .... mass propagation of sugarcane genotypes grown in. Ethiopia, and due to this the .... transferred cultures showed multiple shooting with an average of 9.10 ± 0.10 shoots ...

  8. Regional based estimates of water use for commercial sugar-cane ...

    African Journals Online (AJOL)

    The water use of rain-fed sugar-cane has come under the spotlight in South Africa, largely as a result of changes in legislation and a focus on streamflow reduction activities. In this study a robust relationship between sugar-cane yield and evapotranspiration derived by Thompson in 1976 is applied in conjunction with ...

  9. Regional-based estimates of water use for commercial sugar-cane ...

    African Journals Online (AJOL)

    derived by Thompson in 1976 is applied in conjunction with regional cane production records in South Africa. These were used to provide regional estimates of water use of commercial rain-fed and irrigated sugar-cane as affected by environmental limitations. The mean water use of sugar-cane at an industry scale was 598 ...

  10. Where is sugarcane cropping expanding in the brazilian cerrado, and why? A case study

    Directory of Open Access Journals (Sweden)

    MURILO R. DE ARRUDA

    2017-08-01

    Full Text Available ABSTRACT Sugarcane growing area in Brazil sharply expanded between 2000 and 2010 due to the increasing world demand for sugar and ethanol. Since this expansion of sugarcane is said to occur in areas covered by degraded pastures, it is likely not threatening the environment or food production. In order to verify this assumption, we investigate at farm and field levels which types of land use sugarcane cropping replaced between 2005 and 2010 and the reasons for farmers shifting or not shifting to sugarcane, as a case study in two counties in the state of Goiás. Within the studied period, sugarcane cropping expansion was related to large farms, lower risk perceived by farmers, and higher profitability compared with soybean and beef cattle-raising. For smallholders, particularly dairy farmers, the need to comply with the set-aside rules under Brazilian Forest Code (Código Florestal Brasileiro made a shift to sugarcane less attractive, as it would have forced them to reduce farm cultivable area, with loss of incomes. From 30,408 ha under sugarcane surveyed, 45.7% had used to be pastures, 31% had previously been pastures rotated with soybean and maize, and 23.3% had been cropped exclusively with soybean or maize.

  11. Nutrient Partitioning and Stoichiometry in Unburnt Sugarcane Ratoon at Varying Yield Levels

    Directory of Open Access Journals (Sweden)

    José Marcos Leite

    2016-04-01

    Full Text Available Unraveling nutrient imbalances in contemporary agriculture is a research priority to improve whenever possible yield and nutrient use efficiency in sugarcane (Saccharum spp. systems while minimizing the costs of cultivation (e.g., use of fertilizers and environmental concerns. The main goal of this study was therefore to investigate biomass and nutrient [nitrogen (N, phosphorus (P, and potassium (K] content, partitioning, stoichiometry and internal efficiencies in sugarcane ratoon at varying yield levels. Three sites were established on highly weathered tropical soils located in the Southeast region of Brazil. At all sites, seasonal biomass and nutrient uptake patterns were synthesized from four sampling times taken throughout the sugarcane ratoon season. At all sites, in-season nutrient partitioning (in diverse plant components, internal efficiencies (yield to nutrient content ratio and nutrient ratios (N:P and N:K were determined at harvesting. Sugarcane exhibited three distinct phases of plant growth, as follows: lag, exponential-linear, and stationary. Across sites, nutrient requirement per unit of yield was 1.4 kg N, 0.24 kg P, and 2.7 kg K per Mg of stalk produced, but nutrient removal varied with soil nutrient status (based on soil plus fertilizer nutrient supply and crop demand (potential yield. Dry leaves had lower nutrient content (N, P, and K and broader N:P and N:K ratios when compared with tops and stalks plant fractions. Greater sugarcane yield and narrowed N:P ratio (6:1 were verified for tops of sugarcane when increasing both N and P content. High-yielding sugarcane systems were related to higher nutrient content and more balanced N:P (6:1 and N:K (0.5:1 ratios.

  12. Chronic consumption of distilled sugarcane spirit induces anxiolytic-like effects in mice.

    Science.gov (United States)

    Sena, Maria Clecia P; Nunes, Fabíola C; Salvadori, Mirian G S Stiebbe; Carvalho, Cleyton Charles D; Morais, Liana Clebia S L; Braga, Valdir A

    2011-01-01

    Chronic ethanol consumption is a major public health problem throughout the world. We investigated the anxiolytic-like effects and the possible ever injury induced by the chronic consumption of ethanol or sugarcane spirit in mice. Adult mice were exposed to a two-bottle free-choice paradigm for 6 weeks. The mice in Group A (n = 16) had access to sugarcane spirit + distilled water, the mice in Group B (n = 15) had access to ethanol + distilled water, and the mice in Group C (control, n = 14) had access to distilled water + distilled water. The ethanol content in the beverages offered to Groups A and B was 2% for the first week, 5% for the second week and 10% for the remaining four weeks. At the end of the experimental period, the mice were evaluated using the elevated-plus maze and the hole-board test to assess their anxiety-related behaviors. We also determined the serum aspartate aminotransferase and alanine aminotransferase levels. In the elevated-plus maze, the time spent in the open arms was increased in the mice exposed to chronic ethanol (32 ± 8 vs. 7 ± 2 s, n = 9) or sugarcane spirit (36 ± 9 vs. 7 ± 2 s, n = 9) compared to the controls. In the hole-board test, the mice exposed to ethanol or sugarcane spirit displayed increases in their head-dipping frequency (16 ± 1 for the control group, 27 ± 2 for the ethanol group, and 31 ± 3 for the sugarcane-spirit group; n = 9 for each group). In addition, the mice exposed to sugarcane spirit displayed an increase in the aspartate aminotransferase / alanine aminotransferase ratio compared to the ethanol group (1.29 ± 0.17 for the control group and 2.67 ± 0.17 for the sugarcane spirit group; n = 8 for each group). The chronic consumption of sugarcane-spirit produces liver injury and anxiolytic-like effects and the possible liver injury in mice.

  13. Chronic consumption of distilled sugarcane spirit induces anxiolytic-like effects in mice

    Directory of Open Access Journals (Sweden)

    Maria Clecia P. Sena

    2011-01-01

    Full Text Available OBJECTIVE: Chronic ethanol consumption is a major public health problem throughout the world. We investigated the anxiolytic-like effects and the possible ever injury induced by the chronic consumption of ethanol or sugarcane spirit in mice. METHOD: Adult mice were exposed to a two-bottle free-choice paradigm for 6 weeks. The mice in Group A (n = 16 had access to sugarcane spirit + distilled water, the mice in Group B (n = 15 had access to ethanol + distilled water, and the mice in Group C (control, n = 14 had access to distilled water + distilled water. The ethanol content in the beverages offered to Groups A and B was 2% for the first week, 5% for the second week and 10% for the remaining four weeks. At the end of the experimental period, the mice were evaluated using the elevated-plus maze and the hole-board test to assess their anxiety-related behaviors. We also determined the serum aspartate aminotransferase and alanine aminotransferase levels. RESULTS: In the elevated-plus maze, the time spent in the open arms was increased in the mice exposed to chronic ethanol (32 + 8 vs. 7 + 2 s, n = 9 or sugarcane spirit (36 + 9 vs. 7 + 2 s, n = 9 compared to the controls. In the hole-board test, the mice exposed to ethanol or sugarcane spirit displayed increases in their head-dipping frequency (16 + 1 for the control group, 27 + 2 for the ethanol group, and 31 + 3 for the sugarcane-spirit group; n = 9 for each group. In addition, the mice exposed to sugarcane spirit displayed an increase in the aspartate aminotransferase / alanine aminotransferase ratio compared to the ethanol group (1.29 + 0.17 for the control group and 2.67 + 0.17 for the sugarcane spirit group; n = 8 for each group. CONCLUSION: The chronic consumption of sugarcane-spirit produces liver injury and anxiolytic-like effects and the possible liver injury in mice.

  14. Detection of Genetically Modified Sugarcane by Using Terahertz Spectroscopy and Chemometrics

    Science.gov (United States)

    Liu, J.; Xie, H.; Zha, B.; Ding, W.; Luo, J.; Hu, C.

    2018-03-01

    A methodology is proposed to identify genetically modified sugarcane from non-genetically modified sugarcane by using terahertz spectroscopy and chemometrics techniques, including linear discriminant analysis (LDA), support vector machine-discriminant analysis (SVM-DA), and partial least squares-discriminant analysis (PLS-DA). The classification rate of the above mentioned methods is compared, and different types of preprocessing are considered. According to the experimental results, the best option is PLS-DA, with an identification rate of 98%. The results indicated that THz spectroscopy and chemometrics techniques are a powerful tool to identify genetically modified and non-genetically modified sugarcane.

  15. The influence of heavy mineral crushing in analysis of U mobile

    International Nuclear Information System (INIS)

    Tatang-Suherman

    2000-01-01

    The aim of experiments is to find out the influence of sample crushing in analysis of U mobile it was compared between U content of crusher and uncrushed samples. The uncrushed samples including the grain size of minus 40, 60, 80 and 100 mesh, since while the uncrushed sample was minus 60, 80, 100, 120 and 150 mesh. The U analysis was done by comparing with fluorescence of standard sample using Fluorimetric determination. The result of uncrushed samples have a same concentration in all of grain fractions and the crushed samples have a higher concentration on the smallest of grain fractions. The content of U mobile from crushed sample have significant result at - 120 mesh to - 150 mesh

  16. Discrimination of sugarcane according to cultivar by 1H NMR and chemometric analyses

    Energy Technology Data Exchange (ETDEWEB)

    Alves Filho, Elenilson G.; Silva, Lorena M.A.; Choze, Rafael; Liao, Luciano M. [Laboratorio de Ressonancia Magnetica Nuclear, Instituto de Quimica, Universidade Federal de Goias (UFG), Goiania, GO (Brazil); Honda, Neli K.; Alcantara, Glaucia B. [Departamento de Quimica, Universidade Federal de Mato Grosso do Sul (UFMS), Campo Grande, MS (Brazil)

    2012-07-01

    Several technologies for the development of new sugarcane cultivars have mainly focused on the increase in productivity and greater disease resistance. Sugarcane cultivars are usually identified by the organography of the leaves and stems, the analysis of peroxidase and esterase isoenzyme activities and the total soluble protein as well as soluble solid content. Nuclear magnetic resonance (NMR) associated with chemometric analysis has proven to be a valuable tool for cultivar assessment. Thus, this article describes the potential of chemometric analysis applied to 1H high resolution magic angle spinning (HRMAS) and NMR in solution for the investigation of sugarcane cultivars. For this purpose, leaves from eight different cultivars of sugarcane were investigated by {sup 1}H NMR spectroscopy in combination with chemometric analysis. The approach shows to be a useful tool for the distinction and classification of different sugarcane cultivars as well as to access the differences on its chemical composition. (author)

  17. A structured approach to target starch solubilisation and hydrolysis for the sugarcane industry.

    Science.gov (United States)

    Cole, Marsha R; Rose, Ingrid; Chung, Yoo Jin; Eggleston, Gillian

    2015-01-01

    In sugarcane processing, starch is considered an impurity that negatively affects processing and reduces the quality of the sugar end-product. In the last decade, there has been a general world-wide increase in starch concentrations in sugarcane. Industrial α-amylases have been used for many years to mitigate issues arising from starch in the sugarcane industry. Mixed results have prompted further studies of the behaviour of different physical forms of starch and their interactions with α-amylases during processing. By using corn starch as a reference in model juices and syrups, processing parameters, activities, and hydrolysis of insoluble, swollen, and soluble starch forms were evaluated for two commercial α-amylases with high (HT) and intermediate (IT) temperature stability, respectively. The ability of starch to solubilise across a sugarcane factory is largely limited by increased Brix values. Optimum target locations and conditions for the application of α-amylases in sugarcane processing are discussed in detail. Published by Elsevier Ltd.

  18. Rock Crushing Using Microwave Pre-Treatment

    KAUST Repository

    Kim, Seunghee; Santamarina, Carlos

    2016-01-01

    Crushing and grinding are primary contributors to a high energy demand in the mining industry, yet, both are surprisingly inefficient processes, often with efficiencies as low as 1%. We analyze size reductions during crushing and grinding operations and explore the potential of multiplying internal weaknesses in rock materials by non-mechanical means. In particular, when rock blocks (wet or even dry if polycrystalline) are exposed to microwaves, internal cracks can develop along grain boundaries via differential thermal expansion between grains and volumetric thermal expansion of water in pores. Brazilian tests conducted on granite and cement mortar specimens show that the tensile strength decreases proportional to the duration of microwave treatment. Thermal changes, excessive fluid pressure buildup and induced stresses are analyzed in the context of hydro-Thermo-mechanically coupled processes. Results confirm that both differential thermal expansion of mineral grains and volumetric thermal expansion of water can generate cracks upon microwave exposure. Optimal conditions are suggested to lower the combined consumption of electric and mechanical energy.

  19. Rock Crushing Using Microwave Pre-Treatment

    KAUST Repository

    Kim, Seunghee

    2016-08-11

    Crushing and grinding are primary contributors to a high energy demand in the mining industry, yet, both are surprisingly inefficient processes, often with efficiencies as low as 1%. We analyze size reductions during crushing and grinding operations and explore the potential of multiplying internal weaknesses in rock materials by non-mechanical means. In particular, when rock blocks (wet or even dry if polycrystalline) are exposed to microwaves, internal cracks can develop along grain boundaries via differential thermal expansion between grains and volumetric thermal expansion of water in pores. Brazilian tests conducted on granite and cement mortar specimens show that the tensile strength decreases proportional to the duration of microwave treatment. Thermal changes, excessive fluid pressure buildup and induced stresses are analyzed in the context of hydro-Thermo-mechanically coupled processes. Results confirm that both differential thermal expansion of mineral grains and volumetric thermal expansion of water can generate cracks upon microwave exposure. Optimal conditions are suggested to lower the combined consumption of electric and mechanical energy.

  20. N-glycosylation in sugarcane

    Directory of Open Access Journals (Sweden)

    Maia Ivan G.

    2001-01-01

    Full Text Available The N-linked glycosylation of secretory and membrane proteins is the most complex posttranslational modification known to occur in eukaryotic cells. It has been shown to play critical roles in modulating protein function. Although this important biological process has been extensively studied in mammals, much less is known about this biosynthetic pathway in plants. The enzymes involved in plant N-glycan biosynthesis and processing are still not well defined and the mechanism of their genetic regulation is almost completely unknown. In this paper we describe our first attempt to understand the N-linked glycosylation mechanism in a plant species by using the data generated by the Sugarcane Expressed Sequence Tag (SUCEST project. The SUCEST database was mined for sugarcane gene products potentially involved in the N-glycosylation pathway. This approach has led to the identification and functional assignment of 90 expressed sequence tag (EST clusters sharing significant sequence similarity with the enzymes involved in N-glycan biosynthesis and processing. The ESTs identified were also analyzed to establish their relative abundance.

  1. Transcriptome analysis of Aspergillus niger grown on sugarcane bagasse

    Directory of Open Access Journals (Sweden)

    Goldman Gustavo H

    2011-10-01

    Full Text Available Abstract Background Considering that the costs of cellulases and hemicellulases contribute substantially to the price of bioethanol, new studies aimed at understanding and improving cellulase efficiency and productivity are of paramount importance. Aspergillus niger has been shown to produce a wide spectrum of polysaccharide hydrolytic enzymes. To understand how to improve enzymatic cocktails that can hydrolyze pretreated sugarcane bagasse, we used a genomics approach to investigate which genes and pathways are transcriptionally modulated during growth of A. niger on steam-exploded sugarcane bagasse (SEB. Results Herein we report the main cellulase- and hemicellulase-encoding genes with increased expression during growth on SEB. We also sought to determine whether the mRNA accumulation of several SEB-induced genes encoding putative transporters is induced by xylose and dependent on glucose. We identified 18 (58% of A. niger predicted cellulases and 21 (58% of A. niger predicted hemicellulases cellulase- and hemicellulase-encoding genes, respectively, that were highly expressed during growth on SEB. Conclusions Degradation of sugarcane bagasse requires production of many different enzymes which are regulated by the type and complexity of the available substrate. Our presently reported work opens new possibilities for understanding sugarcane biomass saccharification by A. niger hydrolases and for the construction of more efficient enzymatic cocktails for second-generation bioethanol.

  2. Transcriptome analysis of Aspergillus niger grown on sugarcane bagasse

    Science.gov (United States)

    2011-01-01

    Background Considering that the costs of cellulases and hemicellulases contribute substantially to the price of bioethanol, new studies aimed at understanding and improving cellulase efficiency and productivity are of paramount importance. Aspergillus niger has been shown to produce a wide spectrum of polysaccharide hydrolytic enzymes. To understand how to improve enzymatic cocktails that can hydrolyze pretreated sugarcane bagasse, we used a genomics approach to investigate which genes and pathways are transcriptionally modulated during growth of A. niger on steam-exploded sugarcane bagasse (SEB). Results Herein we report the main cellulase- and hemicellulase-encoding genes with increased expression during growth on SEB. We also sought to determine whether the mRNA accumulation of several SEB-induced genes encoding putative transporters is induced by xylose and dependent on glucose. We identified 18 (58% of A. niger predicted cellulases) and 21 (58% of A. niger predicted hemicellulases) cellulase- and hemicellulase-encoding genes, respectively, that were highly expressed during growth on SEB. Conclusions Degradation of sugarcane bagasse requires production of many different enzymes which are regulated by the type and complexity of the available substrate. Our presently reported work opens new possibilities for understanding sugarcane biomass saccharification by A. niger hydrolases and for the construction of more efficient enzymatic cocktails for second-generation bioethanol. PMID:22008461

  3. Effect of orange rust on sugarcane breeding program at canal Point

    Science.gov (United States)

    Orange rust of sugarcane (Saccharum spp. hybrids), caused by Puccinia kuehnii (W. Krüger) E.J. Butler, appeared in the Western Hemisphere ten years ago. Orange rust substantially reduces yields in susceptible sugarcane genotypes. Majority of the commercial cultivars were susceptible at the time of o...

  4. A search for markers of sugarcane evolution

    Directory of Open Access Journals (Sweden)

    M. Bacci Jr.

    2001-12-01

    Full Text Available To determine the phylogenetic relationship between sugarcane cultivars and other members of the Saccharinae subtribe, we identified the fast evolving ITS1-5.8S-ITS2 (ITS = internal transcribed spacer; 5.8S = 5.8S ribosomal DNA region of the sugarcane genome in the Sugarcane Expressed Sequence Tag (SUCEST genome project database. Parsimony analysis utilizing this region and homologs belonging to the 23 closely related Andropogoneae currently deposited in the GenBank database has shown sugarcane as the sister group of Saccharum sinense. However, because there are few parsimony-informative characters and high homoplasy in the ITS1-5.8S-ITS2 region we were not able to determine with confidence the phylogenetic relationship between sugarcane and some of the remaining members of Saccharine subtribe. To find alternatives for the phylogenetic reconstruction of sugarcane evolutionary history, we selected 17 markers (nuclear, chloroplastic or mitochondrial from the SUCEST database of which apha-tubulin, ribosomal protein L16 (rpl16 and DNA-directed RNA polymerase beta chain (rpoC2 were found to have a low incidence of polymorphism and comparable, or even faster, rates of evolution than the ITS1-5.8S-ITS2 region. We suggest that these markers should be considered as preferential choices for phylogenetic studies of Saccharinae subtribe.Com o propósito de determinar a relação filogenética entre a cana-de-açúcar e membros da subtribo Saccharinae, a região gênica nuclear ITS1-5,8S-ITS2 (ITS: espaçador interno transcrito; 5,8S: DNA ribossomal 5.8S, com alta taxa evolutiva, foi identificada no banco de dados do projeto genoma "Sugarcane Expressed Sequence Tag" (SUCEST. Uma análise através do método de parcimônia, utilizando esta região e seqüências homólogas de 23 Andropogoneae retiradas da base de dados GenBank, indicou que a cana-de-açúcar é o grupo-irmão de Saccharum sinense. No entanto, devido à pequena quantidade de caracteres

  5. [Hygienic assessment of metal-lurgical slag crushed stone for its use in road-building].

    Science.gov (United States)

    Tikhomirov, Iu P; Ippolitova, V P; Bezrokov, M E

    2010-01-01

    The increasing amount of industrial waste generates a need for its use as recycled materials. The paper presents the results of hygienic assessment of metallurgic slag crushed stone to be added to natural materials in highway building. The research program has included the measurement of content of water-soluble forms of metals, the evaluation of the acute toxicity of waste after oral administration to mice and rats, the study of the toxicity of waste by biotesting and the activity of natural radionuclides. The slag crushed stone virtually lacks water-soluble elements when it contains a high level of bulk forms of metals. According to acute toxicity for warm-blooded animals, the slag crushed stone belongs to Hazard Class IV by GOST 12.1.007-76 (low hazard substances). The biotesting on hydrocoles, the slag crushed stone is also referred to as Class IV (low hazard substances). In terms of the level of natural radionuclides, the slag crushed stone poses no hazard to the environment. The performed studies give grounds to recommend metallurgical slag crushed stone to be added to natural materials for highway building.

  6. CRUSH1: a simplified computer program for impact analysis of radioactive material transport casks

    Energy Technology Data Exchange (ETDEWEB)

    Ikushima, Takeshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-07-01

    In drop impact analyses for radioactive transport casks, it has become possible to perform them in detail by using interaction evaluation, computer programs, such as DYNA2D, DYNA3D, PISCES and HONDO. However, the considerable cost and computer time are necessitated to perform analyses by these programs. To meet the above requirements, a simplified computer program CRUSH1 has been developed. The CRUSH1 is a static calculation computer program capable of evaluating the maximum acceleration of cask bodies and the maximum deformation of shock absorbers using an Uniaxial Displacement Method (UDM). The CRUSH1 is a revised version of the CRUSH. Main revisions of the computer program are as follows; (1) not only main frame computer but also work stations (OS UNIX) and personal computer (OS Windows 3.1 or Windows NT) are available for use of the CRUSH1 and (2) input data set are revised. In the paper, brief illustration of calculation method using UDM is presented. The second section presents comparisons between UDM and the detailed method. The third section provides a use`s guide for CRUSH1. (author)

  7. CRUSH1: a simplified computer program for impact analysis of radioactive material transport casks

    International Nuclear Information System (INIS)

    Ikushima, Takeshi

    1996-07-01

    In drop impact analyses for radioactive transport casks, it has become possible to perform them in detail by using interaction evaluation, computer programs, such as DYNA2D, DYNA3D, PISCES and HONDO. However, the considerable cost and computer time are necessitated to perform analyses by these programs. To meet the above requirements, a simplified computer program CRUSH1 has been developed. The CRUSH1 is a static calculation computer program capable of evaluating the maximum acceleration of cask bodies and the maximum deformation of shock absorbers using an Uniaxial Displacement Method (UDM). The CRUSH1 is a revised version of the CRUSH. Main revisions of the computer program are as follows; (1) not only main frame computer but also work stations (OS UNIX) and personal computer (OS Windows 3.1 or Windows NT) are available for use of the CRUSH1 and (2) input data set are revised. In the paper, brief illustration of calculation method using UDM is presented. The second section presents comparisons between UDM and the detailed method. The third section provides a use's guide for CRUSH1. (author)

  8. Effect of Raw Crushed Garlic (Allium sativum L.) on Components of Metabolic Syndrome.

    Science.gov (United States)

    Choudhary, Prema Ram; Jani, Rameshchandra D; Sharma, Megh Shyam

    2017-09-28

    Metabolic syndrome consists of a group of risk factors characterized by abdominal obesity, hypertension, atherogenic dyslipidemia, hyperglycemia, and prothrombotic and proinflammatory conditions. Raw garlic homogenate has been reported to reduce serum lipid levels in animal model; however, no precise studies have been performed to evaluate the effect of raw crushed garlic (Allium sativum L.) on components of metabolic syndrome. Therefore, the present study was designed to investigate the effect of raw crushed garlic on components of metabolic syndrome. A total of 40 metabolic syndrome patients were randomly selected from the diabetic center of SP Medical College, Bikaner, Rajasthan, India. They underwent treatment with 100 mg/kg body weight raw crushed garlic 2 times a day with standard diet for 4 weeks; their anthropometric and serum biochemical variables were measured at both the beginning and the end of the study. Statistical analysis was performed using IBM SPSS version 20, and Student's paired "t" test was used to compare variables before and after treatment with garlic preparation. Raw crushed garlic significantly reduced components of metabolic syndrome including waist circumference (p .05) of patients with metabolic syndrome after consumption of raw crushed garlic for 4 weeks. Raw crushed garlic has beneficial effects on components of metabolic syndrome; therefore, it can be used as an accompanying remedy for prevention and treatment of patients with metabolic syndrome.

  9. Analysis of the stress-inducible transcription factor SsNAC23 in sugarcane plants

    Directory of Open Access Journals (Sweden)

    Renata Fava Ditt

    2011-08-01

    Full Text Available Stresses such as cold and drought can impair plant yield and induce a highly complex array of responses. Sugarcane (Saccharum spp. is cultivated in tropical and subtropical areas and is considered a cold-sensitive plant. We previously showed that cold stress induces the expression of several genes in in vitro sugarcane plantlets. Here we characterize one of those genes, SsNAC23, a member of the NAC family of plant-specific transcription factors, which are induced by low temperature and other stresses in several plant species. The expression of SsNAC23 was induced in sugarcane plants exposed to low temperatures (4ºC. With the aim of further understanding the regulatory network in response to stress, we used the yeast two-hybrid system to identify sugarcane proteins that interact with SsNAC23. Using SsNAC23 as bait, we screened a cDNA expression library of sugarcane plants submitted to 4ºC for 48 h. Several interacting partners were identified, including stress-related proteins, increasing our knowledge on how sugarcane plants respond to cold stress. One of these interacting partners, a thioredoxin h1, offers insights into the regulation of SsNAC23 activity.

  10. The impact of some physiomorphic characters of sugarcane genotypes on their resistance against sugarcane pyrilla, pyrilla perpusilla wlk. (lophopidae: homoptera)

    International Nuclear Information System (INIS)

    Rasul, A.; Hassan, M.; Suhail, A.; Sahi, S.T.

    2010-01-01

    Field trials were conducted in the Research Area, Directorate of Sugarcane, Ayub Agricultural Research Institute, Faisalabad to study he physio-morphic characters of sugarcane resistance to the sucking pest Pyrilla perpusilla. Twenty genotypes of sugarcane were tested for their resistance susceptibility against P. perpusilla, as a preliminary screening experiment, during 2006. Based on the population-density count, 3 genotypes, viz., HSF- 240, CPF-243 and S-2002-US-114 showing resistance responses, 3 genotypes viz. CPHS-35, S-2003-US-394 and S-2003-US-623 showing susceptible trends and 3 genotypes viz. S-2003-US-809, S-2002-US-140 and S- 2002-US-104 exerting intermediate trends against the pest under test were selected for the final screening trials during 2007.The genotype S-2003-US-623, was found to be comparatively susceptible; whereas, HSF-240, showed resistance responses. The leaf-width and cane length showed a positive and significant correlation whereas the leaf-spine density had a significant negative effect with pest-population. The Leaf-length and Cane-Diameter did not show a significant correlation with the pest population. (author)

  11. Converting developing and mature sugarcane carbohydrates into ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Rolz, Carlos; De Leon, Roberto [Biochemical Engineering Center, Research Institute, Universidad del Valle de Guatemala (Guatemala)

    2010-10-15

    Experiments were performed employing cane particles obtained from sugarcane at different growth stages until maturation measuring the amount of ethanol produced and the carbohydrate consumption in order to estimate the sugarcane growth stage where both parameters were optimized. Two non-flowering commercial cane varieties NA56 and PR752002 were cultivated and samples taken at different time intervals. Two Saccharomyces cerevisae strains were also compared in the trials. Sucrose was poorly consumed in young cane, which was an unexpected result. Fructose on the other hand was the hexose that remained in the medium at the end of the fermentations specially when using mature sugarcane. There was an increasing trend in ethanol production as a function of days after planting (DAP) as expected; however, a plateau was reached after 225 DAP and the maximum value obtained was between 300 and 325 DAP. When these figures were compared with the corresponding DAP used for sugar production, only 25 days less were needed in the field for maximum ethanol production. On the other hand, it was clear from the data that cane harvesting for ethanol production should not be done after the recommended DAP for commercial sugar production. If this is done, the excess fructose present will not be completely utilized by yeast. Finally, it was observed that the yeast with more affinity for sugarcane fibers showed better ethanol yields in all samples tested. (Copyright copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  12. Biotechnological interventions in sugarcane improvement: strategies, methods and progress

    International Nuclear Information System (INIS)

    Suprasanna, P.

    2010-01-01

    Work has been conducted towards employing in vitro culture system combined with radiation induced mutagenesis in the improvement of sugarcane. Several radiation induced mutants with agronomically desirable traits were isolated and evaluated under field conditions, besides studying abiotic stress responses using biochemical, physiological and molecular tools. This article describes the developments in the in vitro culture systems and related biotechnologies that are evolving as novel strategies in the recent years for use in sugarcane improvement

  13. Phosphorus fertilization in sugarcane cultivation under different soil managements

    OpenAIRE

    Sousa Junior, Paulo R. de; Brunharo, Caio A. C. G.; Furlani, Carlos E. A.; Prado, Renato de M.; Maldonado Júnior, Walter; Zerbato, Cristiano

    2017-01-01

    ABSTRACT Soil preparation along with its chemical adjustment is the most important step in sugarcane plantation, especially because it provides proper conditions for plant development. The objective of the present research was to evaluate sugarcane response to the application of different phosphorus doses and their location, associated with both minimum soil tillage and conventional soil tillage. The experiment was conducted in a split-split-plot randomized block design, where the main plots ...

  14. Sugarcane field residue and bagasse allelopathic impact on vegetable seed germination

    Science.gov (United States)

    The chemical interaction between plants, which is referred to as allelopathy, may result in the inhibition of plant growth and development. The objective of this research was to determine the allelopathic impact of sugarcane (Saccharum officinarum) var. ‘HoCP 96-540’ field residue and sugarcane baga...

  15. Strain-rate effect on initial crush stress of irregular honeycomb under dynamic loading and its deformation mechanism

    Science.gov (United States)

    Wang, Peng; Zheng, Zhijun; Liao, Shenfei; Yu, Jilin

    2018-02-01

    The seemingly contradictory understandings of the initial crush stress of cellular materials under dynamic loadings exist in the literature, and a comprehensive analysis of this issue is carried out with using direct information of local stress and strain. Local stress/strain calculation methods are applied to determine the initial crush stresses and the strain rates at initial crush from a cell-based finite element model of irregular honeycomb under dynamic loadings. The initial crush stress under constant-velocity compression is identical to the quasi-static one, but less than the one under direct impact, i.e. the initial crush stresses under different dynamic loadings could be very different even though there is no strain-rate effect of matrix material. A power-law relation between the initial crush stress and the strain rate is explored to describe the strain-rate effect on the initial crush stress of irregular honeycomb when the local strain rate exceeds a critical value, below which there is no strain-rate effect of irregular honeycomb. Deformation mechanisms of the initial crush behavior under dynamic loadings are also explored. The deformation modes of the initial crush region in the front of plastic compaction wave are different under different dynamic loadings.

  16. Impacts of sugarcane agriculture expansion over low-intensity cattle ranch pasture in Brazil on greenhouse gases.

    Science.gov (United States)

    Bento, Camila Bolfarini; Filoso, Solange; Pitombo, Leonardo Machado; Cantarella, Heitor; Rossetto, Raffaella; Martinelli, Luiz Antonio; do Carmo, Janaina Braga

    2018-01-15

    Sugarcane is a widespread bioenergy crop in tropical regions, and the growing global demand for renewable energy in recent years has led to a dramatic expansion and intensification of sugarcane agriculture in Brazil. Currently, extensive areas of low-intensity pasture are being converted to sugarcane, while management in the remaining pasture is becoming more intensive, i.e., includes tilling and fertilizer use. In this study, we assessed how such changes in land use and management practices alter emissions of greenhouse gases (GHG) such as CO 2 , N 2 O and CH 4 by measuring in situ fluxes for one year after conversion from low-intensity pasture to conventional sugarcane agriculture and management-intensive pasture. Results show that CO 2 and N 2 O fluxes increased significantly in pasture and sugarcane with tillage, fertilizer use, or both combined. Emissions were highly variable for all GHGs, yet, cumulatively, it was clear that annual emissions in CO 2 -equivalent (CO 2 -eq) were higher in management-intense pasture and sugarcane than in unmanaged pasture. Surprisingly, tilled pasture with fertilizer (management-intensive pasture) resulted in higher CO 2 -eq emissions than conventional sugarcane. We concluded that intensification of pasture management and the conversion of pasture to sugarcane can increase the emission factor (EF) estimated for sugarcane produced in Brazil. The role of management practices and environmental conditions and the potential for reducing emissions are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Expansion of Sugarcane area for Ethanol production in Brazil: a Threat to Food Production and Environmental Sustainability?

    Science.gov (United States)

    Monteiro, J. M.; Coutinho, H. L.; Veiga, L. B.

    2012-12-01

    The raise in fossil fuels prices and the increase in Greenhouse Gas emissions is leading nations to adopt non-fossil fuels based energy sources. Sugarcane crops for biofuel production are expanding fast in Brazil, mainly through land use change (LUC) processes, in substitution of pasturelands and grain crops plantations. Would these changes affect negatively sustainability assessments of bioethanol production in the future? We estimate the extent of sugarcane cropland needed to produce sufficient ethanol to attend to market demands. This work presents a baseline scenario for sugarcane cropping area in Brazil in 2017, taking into account market forces (supply and demand). We also comment on a policy instrument targetting sustainable sugarcane production in Brazil. The expansion scenarios took into account the demand for ethanol from 2008-2017, produced by the Energy Research Corporation, of Brazil. In order to develop the expansion scenario, we estimated the amount of sugarcane needed to attend the ethanol demand. We then calculated the area needed to generate that amount of sugarcane. The analytical parameters were: 1) one tonne of sugarcane produces an average 81.6 liters of ethanol; 2) the average sugarcane crop productivity varied linearly from 81.4 tons/hectare in 2008 to 86.2 tons/hectare in 2017. We also assumed that sugarcane productivity in 2017 as the current average productivity of sugarcane in the State of São Paulo. The results show that the requirement for 3.5 million ha in 2007 will increase to 9 million ha in 2017. The Sugarcane Agroecologic Zoning (ZAECANA), published by Embrapa (2009), is a tool that not only informs the territory occupation and use policies, but also classifies land as qualified, restricted or non-qualified for the plantation of sugarcane crops. The ZAECANA is based on soil and climate suitability assessments, and is presented in a spatially-explicit format. Adopting the precautionary principle, a national policy was established

  18. Continuous-flow leaching studies of crushed and cored SYNROC

    International Nuclear Information System (INIS)

    Coles, D.G.; Bazan, F.

    1982-01-01

    Both crushed (150- to 300- μm) and cored (1,8- mm-diam) samples of SYNROC have been leached with single-pass continuous-flow leaching equipment. Crushed samples of cesium-hollandite were also leached in a similar experiment. Temperatures used were 25 0 and 75 0 C and leachates were 0.03 N NaHCO 3 and distilled water. Leaching rates from SYNROC-C were ranked cesium > strontium greater than or equal to calcium > barium > zirconium. A comparison of leaching rates is made between crushed SYNROC, cored SYNROC, and Pacific Northwest Laboratory 76-68 glass beads. This comparison depends on how the surface areas are determined for each sample. Based on geometric surface areas for SYNROC cores and glass beads, cesium leach rates from SYNROC compare well with both sodium and neptunium leached from the glass. The other elements leached from SYNROC are lower than sodium and neptunium leached from glass. They also vary for each element, while glass shows nearly the same leach rate for both sodium and neptunium

  19. Continuous-flow leaching studies of crushed and cored SYNROC

    International Nuclear Information System (INIS)

    Coles, D.G.; Bazan, F.

    1981-01-01

    Both crushed (150 to 300 μm) and cored (1.8 mm diameter) samples of SYNROC have been leached with the single-pass continuous-flow leaching equipment. Crushed samples of Cs-hollandite were also leached in a similar experiment. Temperatures used were 25 and 75 0 C and leachates were 0.03 N NaHCO 3 and distilled water. Leaching rates from SYNROC C were ranked Cs > Sr greater than or equal to Ca > Ba > Zr. A comparison of leaching rates is made between crushed SYNROC, cored SYNROC, and PNL 76-68 glass beads. This comparison depends on how the surface areas are determined for each sample. Based on geometric surface areas for SYNROC cores and glass beads Cs leach rates from SYNROC compare well with both Na and Np leached from the glass. The other elements leached from SYNROC are lower than Na and Np leached from glass. They also vary for each element while glass shows nearly the same leach rate for both Na and Np

  20. Growth, cane yield and sugar content of six genotypes of sugarcane ...

    African Journals Online (AJOL)

    The growth and yield of six sugarcane genotypes were studied in field plots between 1999 and 2001, at Umudike, in the humid forest zone of southeastern Nigeria. Treatments comprised five improved sugarcane genotypes (NCS 001, NCS 003, NCS 004, NCS 005 and C062175) and one local variety (Umudike Local) ...

  1. NDVI to Detect Sugarcane Aphid Injury to Grain Sorghum.

    Science.gov (United States)

    Elliott, N C; Backoulou, G F; Brewer, M J; Giles, K L

    2015-06-01

    Multispectral remote sensing has potential to provide quick and inexpensive information on sugarcane aphid, Melanaphis sacchari (Zehntner), pest status in sorghum fields. We describe a study conducted to determine if injury caused by sugarcane aphid to sorghum plants in fields of grain sorghum could be detected using multispectral remote sensing from a fixed wing aircraft. A study was conducted in commercial grain sorghum fields in the Texas Gulf Coast region in June 2014. Twenty-six commercial grain sorghum fields were selected and rated for the level of injury to sorghum plants in the field caused by sugarcane aphid. Plant growth stage ranged from 5.0 (watery ripe) to 7.0 (hard dough) among fields; and plant injury rating from sugarcane aphid ranged from 1.0 (little or no injury) to 4.0 (>40% of plants displaying injury) among fields. The normalized differenced vegetation index (NDVI) is calculated from light reflectance in the red and near-infrared wavelength bands in multispectral imagery and is a common index of plant stress. High NDVI indicates low levels of stress and low NDVI indicates high stress. NDVI ranged from -0.07 to 0.26 among fields. The correlation between NDVI and plant injury rating was negative and significant, as was the correlation between NDVI and plant growth stage. The negative correlation of NDVI with injury rating indicated that plant stress increased with increasing plant injury. Reduced NDVI with increasing plant growth probably resulted from reduced photosynthetic activity in more mature plants. The correlation between plant injury rating and plant growth stage was positive and significant indicating that plant injury from sugarcane aphid increased as plants matured. The partial correlation of NDVI with plant injury rating was negative and significant indicating that NDVI decreased with increasing plant injury after adjusting for its association with plant growth stage. We demonstrated that remotely sensed imagery acquired from grain

  2. Seismic tipping analysis of a spent nuclear fuel shipping cask sitting on a crush pad

    International Nuclear Information System (INIS)

    Uldrich, E.D.; Hawkes, B.D.

    1998-04-01

    A crush pad has been designed and analyzed to absorb the kinetic energy of an accidentally dropped spent nuclear fuel shipping cask into a 44 ft. deep cask unloading pool. Conventional analysis techniques available for evaluating a cask for tipping due to lateral seismic forces assume that the cask rests on a rigid surface. In this analysis, the cask (110 tons) sits on a stainless steel encased (0.25 in. top plate), polyurethane foam (4 ft. thick) crush pad. As the cask tends to rock due to horizontal seismic forces, the contact area between the cask and the crush pad is reduced, increasing the bearing stress, and causing the pivoting corner of the cask to depress into the crush pad. As the crush pad depresses under the cask corner, the pivot point shifts from the corner toward the cask center, which facilitates rocking and potential tipping of the cask. Subsequent rocking of the cask may deepen the depression, further contributing to the likelihood of cask tip over. However, as the depression is created, the crush pad is absorbing energy from the rocking cask. Potential tip over of the cask was evaluated by performing a non-linear, dynamic, finite element analysis with acceleration time history input. This time history analysis captured the effect of a deforming crush pad, and also eliminated conservatisms of the conventional approaches. For comparison purposes, this analysis was also performed with the cask sitting on a solid stainless steel crush pad. Results indicate that the conventional methods are quite conservative relative to the more exacting time history analysis. They also indicate that the rocking motion is less on the foam crush pad than on the solid stainless steel pad

  3. Assessment of Sugarcane Germplasm ( Saccharum spp. complex Against Red Rot Pathogen Colletotrichum Falcatum

    Directory of Open Access Journals (Sweden)

    Atul Singh

    2017-08-01

    Full Text Available ABSTRACT Red rot, caused by Colletotrichum falcatum Went is the most important disease of sugarcane in India inflicting substantial loss to both cane industry and cane growers. To keep in view the importance of red rot disease of sugarcane, 117 accession of sugarcane germplasm including different Saccharum species and Indian and foreign commercial hybrids were tested against red rot with Cf 07, Cf 08 & Cf 09 (national pathotypes by plug method of inoculation. Out of 117, 6 were found resistant and 12 were moderately resistant against red rot and rest were moderately susceptible/susceptible/highly susceptible. Theses resistance and moderately resistant accession can be further utilize to produce resistance varieties against the most devastating pathogen of sugarcane.

  4. Potential of Sugarcane in Modern Energy Development in Southern Africa

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Simone P., E-mail: sp.souza@yahoo.com.br; Horta Nogueira, Luiz A. [Interdisciplinary Center for Energy Planning, University of Campinas (UNICAMP), Campinas, SP (Brazil); Watson, Helen K. [School of Agricultural, Earth and Environmental Sciences, University of KwaZulu-Natal, Durban, KZN (South Africa); Lynd, Lee Rybeck [Dartmouth College, Thayer School of Engineering, Dartmouth, NH (United States); Elmissiry, Mosad [New Partnership for Africa’s Development (NEPAD), Johannesburg, GT (South Africa); Cortez, Luís A. B. [Faculty of Agricultural Engineering, University of Campinas (UNICAMP), Campinas, SP (Brazil)

    2016-12-26

    For more than half of the Southern African population, human development is limited by a lack of access to electricity and modern energy for cooking. Modern bioenergy merits consideration as one means to address this situation in areas where sufficient arable land is available. While numerous studies have concluded that Africa has significant biomass potential, they do not indicate by how much it can effectively reduce the use of traditional biomass and provide more accessible energy, especially at a country level. Here, we evaluate the potential of sugarcane to replace traditional biomass and fossil fuel and enlarge the access to electricity in Southern Africa. By using its current molasses for ethanol production, Swaziland could increase electricity generation by 40% using bagasse and replace 60% of cooking fuel or 30% of liquid fossil fuel. Sugarcane expansion over 1% of the pasture land in Angola, Mozambique, and Zambia could replace greater than 70% of cooking fuel. Bioelectricity generation from modest sugarcane expansion could be increased by 10% in Malawi, Mozambique, and Zambia and by 20% in Angola. Our results support the potential of sugarcane as a modern energy alternative for Southern Africa.

  5. Potential of Sugarcane in Modern Energy Development in Southern Africa

    International Nuclear Information System (INIS)

    Souza, Simone P.; Horta Nogueira, Luiz A.; Watson, Helen K.; Lynd, Lee Rybeck; Elmissiry, Mosad; Cortez, Luís A. B.

    2016-01-01

    For more than half of the Southern African population, human development is limited by a lack of access to electricity and modern energy for cooking. Modern bioenergy merits consideration as one means to address this situation in areas where sufficient arable land is available. While numerous studies have concluded that Africa has significant biomass potential, they do not indicate by how much it can effectively reduce the use of traditional biomass and provide more accessible energy, especially at a country level. Here, we evaluate the potential of sugarcane to replace traditional biomass and fossil fuel and enlarge the access to electricity in Southern Africa. By using its current molasses for ethanol production, Swaziland could increase electricity generation by 40% using bagasse and replace 60% of cooking fuel or 30% of liquid fossil fuel. Sugarcane expansion over 1% of the pasture land in Angola, Mozambique, and Zambia could replace greater than 70% of cooking fuel. Bioelectricity generation from modest sugarcane expansion could be increased by 10% in Malawi, Mozambique, and Zambia and by 20% in Angola. Our results support the potential of sugarcane as a modern energy alternative for Southern Africa.

  6. Phenotype adaptability and stability of sugarcane genotypes in the sugarcane belt of the state of Pernambuco, Brazil.

    Science.gov (United States)

    Dutra Filho, J A; Junior, T C; Simões Neto, D E

    2014-08-29

    We assessed the agroindustrial performance of 25 sugarcane genotypes adapted to the edaphoclimatic conditions of the State of Pernambuco, Brazil, within the microregions Mata Norte, Mata Sul, Região Central, Litoral Norte, and Litoral Sul. The variables analyzed were POL tonnage per hectare, sugarcane tonnage per hectare, fiber and total recoverable sugar tonnage per hectare, using a randomized block design with four repetitions. Combined variance of experiments, genetic parameter estimates, decomposition of the genotype-environment interaction, and environment stratification were analyzed. Phenotype adaptability and stability were also analyzed. The various genotypes presented great potential for improvement and a similar response pattern to the microregions Centro and Mata Sul of the state of Pernambuco. Genotypes RB863129, RB867515, RB92579, RB953180, SP81-3250, RB75126, and RB942520 were better in productivity and phenotype adaptability and stability compared to genotypes RB892700, RB943365, SP79-1011, Q138, RB943538, SP78-4764, RB953281, RB943066, RB928064, RB93509, RB72454, RB952675, RB952991, RB943161, RB942898, RB872552, RB952900, and RB942849. These genotypes are recommended as cultivation options in the sugarcane belt in the state of Pernambuco, since they stand out in terms of phenotype adaptability and stability as evaluated using the method by Annicchiarico, Lin and Bins, and the method by Eberhart and Russel.

  7. Calculation of density and permeability of compacted crushed salt within an engineered shaft sealing system

    International Nuclear Information System (INIS)

    Loken, M.; Statham, W.

    1997-01-01

    Crushed salt from the host Salado Formation is proposed as a sealing material in one component of a multicomponent seal system design for the shafts of the Waste Isolation Pilot Plant (WIPP), a mined geological repository for storage and disposal of transuranic radioactive wastes located near Carlsbad, New Mexico. The crushed salt will be compacted and placed at a density approaching 90% of the intact density of the host Salado salt. Creep closure of the shaft will further compact the crushed salt over time, thereby reducing the crushed-salt permeability from the initial state and creating an effective long-term seal. A structural model and a fluid flow model have been developed to provide an estimate of crushed-salt reconsolidation rate as a function of depth, time, and pore pressure. Model results are obtained in terms of crushed-salt permeability as a function of time and depth within the salt column. Model results indicate that average salt column permeability will be reduced to 3.3 x 10 -20 m 2 in about 100 years, which provides for an acceptable long-term seal component

  8. Pre-Harvest Sugarcane Burning: Determination of Emission Factors through Laboratory Measurements

    Directory of Open Access Journals (Sweden)

    João Andrade Carvalho

    2012-02-01

    Full Text Available Sugarcane is an important crop for the Brazilian economy and roughly 50% of its production is used to produce ethanol. However, the common practice of pre-harvest burning of sugarcane straw emits particulate material, greenhouse gases, and tropospheric ozone precursors to the atmosphere. Even with policies to eliminate the practice of pre-harvest sugarcane burning in the near future, there is still significant environmental damage. Thus, the generation of reliable inventories of emissions due to this activity is crucial in order to assess their environmental impact. Nevertheless, the official Brazilian emissions inventory does not presently include the contribution from pre-harvest sugarcane burning. In this context, this work aims to determine sugarcane straw burning emission factors for some trace gases and particulate material smaller than 2.5 μm in the laboratory. Excess mixing ratios for CO2, CO, NOX, UHC (unburned hydrocarbons, and PM2.5 were measured, allowing the estimation of their respective emission factors. Average estimated values for emission factors (g kg−1 of burned dry biomass were 1,303 ± 218 for CO2, 65 ± 14 for CO, 1.5 ± 0.4 for NOX, 16 ± 6 for UHC, and 2.6 ± 1.6 for PM2.5. These emission factors can be used to generate more realistic emission inventories and therefore improve the results of air quality models.

  9. Phytochemical profile of sugarcane and its potential health aspects

    OpenAIRE

    Singh, Amandeep; Lal, Uma Ranjan; Mukhtar, Hayat Muhammad; Singh, Prabh Simran; Shah, Gagan; Dhawan, Ravi Kumar

    2015-01-01

    Sugarcane (Saccharum officinarum Linn.) is an important perennial grass of Poaceae family, indigenous to tropical South Asia and Southeast Asia. It is cultivated worldwide due to the economical and medicinal value of its high yielding products. Sugarcane juice is well known as a raw material for the production of refined sugar and its wax is considered as a potential substitute for the expensive carnauba wax, which is of cosmetic and pharmaceutical interest. Refined sugar is the primary produ...

  10. Experimental assessment of the accuracy of genomic selection in sugarcane.

    Science.gov (United States)

    Gouy, M; Rousselle, Y; Bastianelli, D; Lecomte, P; Bonnal, L; Roques, D; Efile, J-C; Rocher, S; Daugrois, J; Toubi, L; Nabeneza, S; Hervouet, C; Telismart, H; Denis, M; Thong-Chane, A; Glaszmann, J C; Hoarau, J-Y; Nibouche, S; Costet, L

    2013-10-01

    Sugarcane cultivars are interspecific hybrids with an aneuploid, highly heterozygous polyploid genome. The complexity of the sugarcane genome is the main obstacle to the use of marker-assisted selection in sugarcane breeding. Given the promising results of recent studies of plant genomic selection, we explored the feasibility of genomic selection in this complex polyploid crop. Genetic values were predicted in two independent panels, each composed of 167 accessions representing sugarcane genetic diversity worldwide. Accessions were genotyped with 1,499 DArT markers. One panel was phenotyped in Reunion Island and the other in Guadeloupe. Ten traits concerning sugar and bagasse contents, digestibility and composition of the bagasse, plant morphology, and disease resistance were used. We used four statistical predictive models: bayesian LASSO, ridge regression, reproducing kernel Hilbert space, and partial least square regression. The accuracy of the predictions was assessed through the correlation between observed and predicted genetic values by cross validation within each panel and between the two panels. We observed equivalent accuracy among the four predictive models for a given trait, and marked differences were observed among traits. Depending on the trait concerned, within-panel cross validation yielded median correlations ranging from 0.29 to 0.62 in the Reunion Island panel and from 0.11 to 0.5 in the Guadeloupe panel. Cross validation between panels yielded correlations ranging from 0.13 for smut resistance to 0.55 for brix. This level of correlations is promising for future implementations. Our results provide the first validation of genomic selection in sugarcane.

  11. Informative genomic microsatellite markers for efficient genotyping applications in sugarcane.

    Science.gov (United States)

    Parida, Swarup K; Kalia, Sanjay K; Kaul, Sunita; Dalal, Vivek; Hemaprabha, G; Selvi, Athiappan; Pandit, Awadhesh; Singh, Archana; Gaikwad, Kishor; Sharma, Tilak R; Srivastava, Prem Shankar; Singh, Nagendra K; Mohapatra, Trilochan

    2009-01-01

    Genomic microsatellite markers are capable of revealing high degree of polymorphism. Sugarcane (Saccharum sp.), having a complex polyploid genome requires more number of such informative markers for various applications in genetics and breeding. With the objective of generating a large set of microsatellite markers designated as Sugarcane Enriched Genomic MicroSatellite (SEGMS), 6,318 clones from genomic libraries of two hybrid sugarcane cultivars enriched with 18 different microsatellite repeat-motifs were sequenced to generate 4.16 Mb high-quality sequences. Microsatellites were identified in 1,261 of the 5,742 non-redundant clones that accounted for 22% enrichment of the libraries. Retro-transposon association was observed for 23.1% of the identified microsatellites. The utility of the microsatellite containing genomic sequences were demonstrated by higher primer designing potential (90%) and PCR amplification efficiency (87.4%). A total of 1,315 markers including 567 class I microsatellite markers were designed and placed in the public domain for unrestricted use. The level of polymorphism detected by these markers among sugarcane species, genera, and varieties was 88.6%, while cross-transferability rate was 93.2% within Saccharum complex and 25% to cereals. Cloning and sequencing of size variant amplicons revealed that the variation in the number of repeat-units was the main source of SEGMS fragment length polymorphism. High level of polymorphism and wide range of genetic diversity (0.16-0.82 with an average of 0.44) assayed with the SEGMS markers suggested their usefulness in various genotyping applications in sugarcane.

  12. Research of environmentally-friendly utilization methods of the crushed stone waste on granite quarries

    Directory of Open Access Journals (Sweden)

    Levytskyi V.G.

    2017-12-01

    Full Text Available The analysis of activity of stone-mining enterprises shows the low competitiveness of crushed stone products Upgrading the quality of crushed stone and production of the European standard fractions requires to use of new technologies and equipment. The main waste of crushed stone pits is сrushed granite waste, which high percent of an exit is caused by outdated equipment and incorrectly selected technological parameters of the crushing process. Crushed-granite waste is stored in dumps which occupy large areas and negatively effect on production area ecology. In November 2017, the Government of Ukraine accepted the National Waste Management Strategy until 2030, the main aim of it is develop a strategy of the mineral raw materials balanced use and international standards introduction at the national level. Therefore, the problem of complex utilization and recycling of waste from stone-mining enterprises with receiving a qualitative secondary product is relevant. The publication presents the сrushed granite waste volumes by crushed stone pit, its properties and main directions of utilization. The ecological influence of waste dumps, in particular granite dust, on the environment and human, the strategy of using non-waste technologies and ecological features of сrushed granite waste secondary processing are considered

  13. Brazilian organic sugarcane spirits: Physicochemical and chromatographic profile

    Directory of Open Access Journals (Sweden)

    Felipe Cimino Duarte

    Full Text Available ABSTRACT There has been a growing demand for products from organic agriculture for the food market. Brazil leads the production of sugarcane spirits and produces about 1.6 billion liters/year. New technologies have been sought throughout the supply chain to improve production, and organic raw material has been used in the production of sugar cane for the production of beverages. This study aimed to define the physicochemical and chromatographic profiles of eleven organic sugarcane spirits samples from various Brazilian states. The secondary components and contaminants were identified and quantified through physicochemical analyses, HPLC and gas chromatography (GC. A significant percentage of the organic sugarcane spirits samples contained concentrations of components that were above the limits required by the Ministry of Agriculture, Livestock and Provisioning (MAPA, specifically the esters (18.20%, copper and dry extract (9.10%. This contamination is caused by bad conditions employed during the production process, which are not in compliance with the good manufacturing practices determined and legislated by Brazilian law.

  14. Sugarcane Initial Growth with Vinasse Application in Latosol under Gradual Aluminum Stress

    Science.gov (United States)

    Marques Viglio, Larissa; Leal Varanda, Leticia; Soares, Marcio Roberto; Casagrande, José Carlos

    2015-04-01

    One of the strategies for overcoming the high acidity of soils and the consequent toxicity of aluminum (Al) is based on the use of varieties adapted to these conditions. In Brazil, the application of vinasse is routine practice in the cultivation of sugarcane due to its fertilizing effect, mainly because of high potassium content. However, the vinasse may also attenuate the toxic effects of Al in the soil by forming complexes with low molecular weight organic acids providing greater depth of the root of sugarcane. The aim of this work was to evaluate the effect of vinasse on the initial growth of three cultivars of sugarcane (RB855453, RB966928 and RB867515), as well as its influence on root depth in a Dystrophic Red-Yellow Latosol (Typic Hapludox) with gradient of saturation by Al. The experiment was conducted in a greenhouse, in totally randomized design with factorial arrangement and three replications. Seedlings of sugarcane were transplanted to PVC columns 0.8 m high, built by stacking four rings (0.2 m high), filled with soil samples, which offered an increasing gradient of saturation by Al (m%) at depth (0-0.2 m (m% = 0,7); 0.2-0.4 m (m% = 7,9); 0.4-0.6 m (m %= 40.8); 0.6-0.8 m (m%= 62.6)). The collection of the experiment was conducted 120 days after planting, with the determination of the stalk diameter (DC), plant height (ALT), leaf nutrient content, dry matter of the aerial part (MSPA) and dry matter of the root system (MSSR). Cultivars of sugarcane and the application of vinasse had effect on DC and the MSSR. Cultivar RB867515 showed higher DC than in other cultivars, with 20.8 mm. The increase of MSSR by sugarcane cultivars varied due to depth. There were no effects of sugarcane cultivars and vinasse application in MSPA. The vinasse application resulted in plants with higher ALT. With the exception of the foliar content of Fe, the N, Ca, Mg, S and Mn content were below those considered appropriate for sugarcane. Unlike other cultivars, the application

  15. Biosynthesis of secondary metabolites in sugarcane

    Directory of Open Access Journals (Sweden)

    S.C. França

    2001-12-01

    Full Text Available A set of genes related to secondary metabolism was extracted from the sugarcane expressed sequence tag (SUCEST database and was used to investigate both the gene expression pattern of key enzymes regulating the main biosynthetic secondary metabolism pathways and the major classes of metabolites involved in the response of sugarcane to environmental and developmental cues. The SUCEST database was constructed with tissues in different physiological conditions which had been collected under varied situation of environmental stress. This database allows researchers to identify and characterize the expressed genes of a wide range of putative enzymes able to catalyze steps in the phenylpropanoid, isoprenoid and other pathways of the special metabolic mechanisms involved in the response of sugarcane to environmental changes. Our results show that sugarcane cDNAs encoded putative ultra-violet induced sesquiterpene cyclases (SC; chalcone synthase (CHS, the first enzyme in the pathway branch for flavonoid biosynthesis; isoflavone synthase (IFS, involved in plant defense and root nodulation; isoflavone reductase (IFR, a key enzyme in phenylpropanoid phytoalexin biosynthesis; and caffeic acid-O-methyltransferase, a key enzyme in the biosynthesis of lignin cell wall precursors. High levels of CHS transcripts from plantlets infected with Herbaspirillum rubri or Gluconacetobacter diazotroficans suggests that agents of biotic stress can elicit flavonoid biosynthesis in sugarcane. From this data we have predicted the profile of isoprenoid and phenylpropanoid metabolism in sugarcane and pointed the branches of secondary metabolism activated during tissue-specific stages of development and the adaptive response of sugarcane to agents of biotic and abiotic stress, although our assignment of enzyme function should be confirmed by careful biochemical and genetic supporting evidence.Este trabalho foi realizado com os objetivos de gerar uma coleção de genes

  16. Trimming and clustering sugarcane ESTs

    Directory of Open Access Journals (Sweden)

    Guilherme P. Telles

    2001-12-01

    Full Text Available The original clustering procedure adopted in the Sugarcane Expressed Sequence Tag project (SUCEST had many problems, for instance too many clusters, the presence of ribosomal sequences, etc. We therefore redesigned the clustering procedure entirely, including a much more careful initial trimming of the reads. In this paper the new trimming and clustering strategies are described in detail and we give the new official figures for the project, 237,954 expressed sequence tags and 43,141 clusters.O método de clustering adotado no Projeto SUCEST (Sugarcane EST Project tinha vários problemas (muitos clusters, presença de seqüências de ribossomo etc. Nós assumimos a tarefa de reprojetar todo o processo de clustering, propondo uma "limpeza" inicial mais cuidadosa das seqüências. Neste artigo as estratégias de limpeza das seqüências e de clustering são descritas em detalhe, incluindo os números oficiais do projeto (237,954 ESTs e 43,141 clusters.

  17. Study on characteristics of printed circuit board liberation and its crushed products.

    Science.gov (United States)

    Quan, Cui; Li, Aimin; Gao, Ningbo

    2012-11-01

    Recycling printed circuit board waste (PCBW) waste is a hot issue of environmental protection and resource recycling. Mechanical and thermo-chemical methods are two traditional recycling processes for PCBW. In the present research, a two-step crushing process combined with a coarse-crushing step and a fine-pulverizing step was adopted, and then the crushed products were classified into seven different fractions with a standard sieve. The liberation situation and particle shape in different size fractions were observed. Properties of different size fractions, such as heating value, thermogravimetric, proximate, ultimate and chemical analysis were determined. The Rosin-Rammler model was applied to analyze the particle size distribution of crushed material. The results indicated that complete liberation of metals from the PCBW was achieved at a size less than 0.59 mm, but the nonmetal particle in the smaller-than-0.15 mm fraction is liable to aggregate. Copper was the most prominent metal in PCBW and mainly enriched in the 0.42-0.25 mm particle size. The Rosin-Rammler equation adequately fit particle size distribution data of crushed PCBW with a correlation coefficient of 0.9810. The results of heating value and proximate analysis revealed that the PCBW had a low heating value and high ash content. The combustion and pyrolysis process of PCBW was different and there was an obvious oxidation peak of Cu in combustion runs.

  18. Remote Sensing Time Series to Evaluate Direct Land Use Change of Recent Expanded Sugarcane Crop in Brazil

    Directory of Open Access Journals (Sweden)

    Marcio Pupin Mello

    2012-04-01

    Full Text Available The use of biofuels to mitigate global carbon emissions is highly dependent on direct and indirect land use changes (LUC. The direct LUC (dLUC can be accurately evaluated using remote sensing images. In this work we evaluated the dLUC of about 4 million hectares of sugarcane expanded from 2005 to 2010 in the South-central region of Brazil. This region has a favorable climate for rain-fed sugarcane, a great potential for agriculture expansion without deforestation, and is currently responsible for almost 90% of Brazilian’s sugarcane production. An available thematic map of sugarcane along with MODIS and Landast images, acquired from 2000 to 2009, were used to evaluate the land use prior to the conversion to sugarcane. A systematic sampling procedure was adopted and the land use identification prior to sugarcane, for each sample, was performed using a web tool developed to visualize both the MODIS time series and the multitemporal Landsat images. Considering 2000 as reference year, it was observed that sugarcane expanded: 69.7% on pasture land; 25.0% on annual crops; 0.6% on forest; while 3.4% was sugarcane land under crop rotation. The results clearly show that the dLUC of recent sugarcane expansion has occurred on more than 99% of either pasture or agriculture land.

  19. Productivity of sugarcane plants of ratooning with fertilizing treatment

    Directory of Open Access Journals (Sweden)

    MUHADIONO

    2010-01-01

    Full Text Available Latief AS, Syarief R, Pramudya B, Muhadiono. 2010. Productivity of sugarcane plants of ratooning with various fertilizing treatments. Nusantara Bioscience 2: 43-47. This research aims to determine the sugarcane plants of ratooning productivity with low external input of fertilization treatment towards farmers can increase profits. The method used is the Completely Randomized Block Design (CRBD with four treatments and three repetitions (4x3. Sugarcane varieties R 579 planted in each patch experiment 5x5 m2. Dosage of fertilizer: P0 = 3.6 kg/year plot experiment was 100% dosage usage of chemical fertilizers used by farmers. Further dosages were P1 (75% = 2.7 kg/plot, P2 (50% = 1.8 kg/plot and P3 (0.25% = 0.9 kg/plot, each supplemented with fertilizer 5 mL of liquid organic/patch a year. Sugarcane crops with a variety of treatment showed no significant difference. The highest productivity was achieved at dosages of P2 (50% chemical fertilizers plus organic fertilizer is 21.67 kg per square meter. Chemical fertilizers can be saved 7 quintals per hectare a year or Rp 997,500 per year. Additional costs of liquid organic fertilizer Rp. 100,000 per hectare year and labor Rp 100,000 per hectare, so the additional advantage of saving farmers fertilizer Rp. 797,500 per year.

  20. Surplus electricity production in sugarcane mills using residual bagasse and straw as fuel

    International Nuclear Information System (INIS)

    Alves, Moises; Ponce, Gustavo H.S.F.; Silva, Maria Aparecida; Ensinas, Adriano V.

    2015-01-01

    The cogeneration system is one of the most important parts of sugarcane mills which use the bagasse as fuel. In the recent years, modern equipments and energy efficiency measures made possible to the sugarcane industry, the production of surplus electricity which become, besides the sugar and ethanol, a third product from the same renewable source, the sugarcane. This work analyses the surplus electric power systems for three different schemes of cogeneration system in the sugarcane industry through the simulator Thermoflow"®. The analysis is made considering both the available bagasse and sugarcane straw recovery as fuel in three different scenarios for the industrial process energy requirements. The results show that the CEST (Condensing Extraction Steam Turbine) system can have a surplus of electricity of up to four times higher than the BPST (Backpressure Steam Turbine) system. The system CEST can have an increase in surplus power above 23% and 102% for the rate of 10% and 50% of cane straw recovery in the field respectively. The BPST-C (Backpressure and Condensing Turbines) system can produce similar values of surplus electricity when compared with the system CEST, but may represent an opportunity of flexible operation of the cogeneration systems in harvest and off-seasons. - Highlights: • At least three cogeneration system options are available in sugarcane mills. • Nowadays, only steam-based cycle cogeneration systems are used in sugarcane mills. • BPST system is limited to 70 e kWh/t cane of surplus electricity production. • CEST system increases the surplus electricity up to four times than the BPST. • Operation during off-season of the BPST-C system is an advantage for this option.

  1. CHANGES OF SUCROSE CONTENT AND INVERTASE ACTIVITY DURING SUGARCANE STEM STORAGE

    Directory of Open Access Journals (Sweden)

    Tri Agus Siswoyo

    2016-10-01

    Full Text Available Invertases (beta-D-fructofuranosidase, E.C. 3.2.1.26 are the key enzymes involved in sucrose metabolism in sugarcane plants. They are highly correlated with sucrose and reducing sugar contents during plant growth. The sugarcane plants have two kinds of invertases, namely neutral invertase (NI and acid invertase (AI. They have different function in sucrose accumulation. The research aimed to study the role of AI and NI in accumulation of reducing sugar during storage of sugarcane stems. Plant materials of 18-month-old field grown sugarcane of the commercial variety R-579 (wet-land and M 442-51 (dry-land were used. Three internodes were sampled to represent immature (internode 1-8/F1, maturing (internode 9-16/F2, and mature (internode 17-24/F3 stem tissues. All tissues were stored for 0-9 days at room temperature (28-32oC and each day, the samplewas extracted to determine invertase activity, total soluble protein, and sugar contents. This observation was valid for invertase activity expressed on a protein basis. At the initiateharvested (0-3 days, NI had a higher specific activity than AI in the sucrose-accumulating region of the sugarcane stems. Negative significant correlation was found between NI specific activity and sucrose accumulation (r2 = 0.41, P < 0.05. AI showed a higher specific activity after 4 days harvested and had negative correlation with sucrose accumulation (r2 = 0.40, P < 0.05. These results showed that NI could be more  responsible in sucrose hydrolisis than AI at early storage of sugarcane stems.

  2. Genotype-specific microsatellite (SSR) markers for the sugarcane germplasm in the Karst region of Guizhou, China

    Science.gov (United States)

    It is the first report on SSR-based molecular evaluation of genetic variability among sugarcane genotypes from the Karst region of China that provides useful information for local sugarcane improvement. Eighteen sugarcane genotypes including 13 active cultivars and five elite QT-series clones bred l...

  3. Effects of phosphate limestone on structure and quality under sugarcane vertisoles

    Directory of Open Access Journals (Sweden)

    Pedro Cairo Cairo

    2017-10-01

    Full Text Available The work was developed in sugarcane areas of cuban vertisols of the north coast of the province of Villa Clara municipality of Sagua la Grande, with the aim of evaluating the effectiveness of phosphate limestone and their combinations with fertilizers and organic manure on the structure and quality of vertisols under sugarcane cultivation. An experiment with phosphate limestone levels and combinations with organic manure (compost, filter cake and fertilizers (NPK was carried out on a wasstrip-block design. A soil analysis was performedat the depth of 0-20 and 20 -40 cm 36 months after the application of treatments. Organic matter, stable aggregates, factor structure, permeability, T value, exchangeable cations, index soil quality and productivity of sugarcane were evaluated. Phosphate limestone and there combinations with organic manures manifested significant effects on soil structure both in the surface layer and subsurface with residual impact over time to 36 months. The results show the close relationship between phosphate limestone and there combinations with organic manures on soil quality index additive, yield of sugarcane and economic impact.

  4. A mixed model QTL analysis for sugarcane multiple-harvest-location trial data

    NARCIS (Netherlands)

    Pastina, M.M.; Malosetti, M.; Gazaffi, R.; Mollinari, M.; Margarido, G.R.A.; Oliveira, K.M.; Pinto, L.R.; Souza, A.P.; Eeuwijk, van F.A.; Garcia, A.A.F.

    2012-01-01

    Sugarcane-breeding programs take at least 12 years to develop new commercial cultivars. Molecular markers offer a possibility to study the genetic architecture of quantitative traits in sugarcane, and they may be used in marker-assisted selection to speed up artificial selection. Although the

  5. Epicoccum nigrum P16, a Sugarcane Endophyte, Produces Antifungal Compounds and Induces Root Growth

    Science.gov (United States)

    Fávaro, Léia Cecilia de Lima; Sebastianes, Fernanda Luiza de Souza; Araújo, Welington Luiz

    2012-01-01

    Background Sugarcane is one of the most important crops in Brazil, mainly because of its use in biofuel production. Recent studies have sought to determine the role of sugarcane endophytic microbial diversity in microorganism-plant interactions, and their biotechnological potential. Epicoccum nigrum is an important sugarcane endophytic fungus that has been associated with the biological control of phytopathogens, and the production of secondary metabolites. In spite of several studies carried out to define the better conditions to use E. nigrum in different crops, little is known about the establishment of an endophytic interaction, and its potential effects on plant physiology. Methodology/Principal Findings We report an approach based on inoculation followed by re-isolation, molecular monitoring, microscopic analysis, plant growth responses to fungal colonization, and antimicrobial activity tests to study the basic aspects of the E. nigrum endophytic interaction with sugarcane, and the effects of colonization on plant physiology. The results indicate that E. nigrum was capable of increasing the root system biomass and producing compounds that inhibit the in vitro growth of sugarcane pathogens Fusarium verticillioides, Colletotrichum falcatum, Ceratocystis paradoxa, and Xanthomomas albilineans. In addition, E. nigrum preferentially colonizes the sugarcane surface and, occasionally, the endophytic environment. Conclusions/Significance Our work demonstrates that E. nigrum has great potential for sugarcane crop application because it is capable of increasing the root system biomass and controlling pathogens. The study of the basic aspects of the interaction of E. nigrum with sugarcane demonstrated the facultative endophytism of E. nigrum and its preference for the phylloplane environment, which should be considered in future studies of biocontrol using this species. In addition, this work contributes to the knowledge of the interaction of this ubiquitous endophyte

  6. Cask crush pad analysis using detailed and simplified analysis methods

    International Nuclear Information System (INIS)

    Uldrich, E.D.; Hawkes, B.D.

    1997-01-01

    A crush pad has been designed and analyzed to absorb the kinetic energy of a hypothetically dropped spent nuclear fuel shipping cask into a 44-ft. deep cask unloading pool at the Fluorinel and Storage Facility (FAST). This facility, located at the Idaho Chemical Processing Plant (ICPP) at the Idaho national Engineering and Environmental Laboratory (INEEL), is a US Department of Energy site. The basis for this study is an analysis by Uldrich and Hawkes. The purpose of this analysis was to evaluate various hypothetical cask drop orientations to ensure that the crush pad design was adequate and the cask deceleration at impact was less than 100 g. It is demonstrated herein that a large spent fuel shipping cask, when dropped onto a foam crush pad, can be analyzed by either hand methods or by sophisticated dynamic finite element analysis using computer codes such as ABAQUS. Results from the two methods are compared to evaluate accuracy of the simplified hand analysis approach

  7. Nitrous oxide emissions from sugarcane straw left on the soil surface in Brazil

    Science.gov (United States)

    Galdos, M. V.; Cerri, C. E.; Carvalho, J. L.; Cerri, C. C.

    2012-12-01

    In Brazil, the largest exporter of ethanol from sugarcane in the world, burning the dry leaves and tops in order to facilitate the harvest and transportation of the stalks is still a common practice. Burning plant residues causes emissions of greenhouse gases (GHGs) such as CO2, CH4 and N2O, besides the release of charcoal particles into the atmosphere. Due to a combination of pressure from changes in the public opinion and economical reasons, in Brazil sugarcane harvest is changing from a burned into an unburned system. Since manual harvest of sugarcane without burning is not economically feasible, mechanical harvesters have been developed that can take the stalk and leave the residues on the field, forming a mulch, in a system called green cane management. It is expected that 80% of the cane harvested in the main producing regions in Brazil will be harvested without burning by 2014. The conversion from burning sugarcane to green management of sugarcane will have impacts on the biogeochemical cycling of carbon and nitrogen in the plant soil system. The green cane management results in the deposition of large amounts of plant litter on the soil surface after harvest, ranging from 10 to 20 tons per hectare, which impact the whole production process of sugarcane, influencing yields, fertilizer management and application, soil erosion, soil organic matter dynamics as well as greenhouse gas emissions (CO2, N2O, CH4). From a GHG perspective, the conservation of sugarcane residues prevents emissions from the burning process, may promote carbon sequestration in soils and releases nitrogen during the decomposition process replacing the need for, and GHG emissions from, fossil fuel based nitrogen fertilizer sources. Measurements of soil C and N stocks and associated greenhouse gas emissions from the burned and unburned sugarcane systems and in the sugarcane expansion areas are still scarce. Therefore, the main objective of this work was to quantify the nitrous oxide

  8. Estimation of herbicide bioconcentration in sugarcane (Saccharum officinarum L.

    Directory of Open Access Journals (Sweden)

    Antonio Luiz Cerdeira

    2015-04-01

    Full Text Available Sugarcane is an important crop for sugar and biofuel production in Brazil. Growers depend greatly on herbicides to produce it. This experiment used herbicide physical-chemical and sugarcane plant physiological properties to simulate herbicide uptake and estimate the bioconcentration factor (BCF. The (BCF was calculated for the steady state chemical equilibrium between the plant herbicide concentration and soil solution. Plant-water partition coefficient (sugarcane bagasse-water partition coefficient, herbicide dilution rate, metabolism and dissipation in the soil-plant system, as well as total plant biomass factors were used. In addition, we added Tebuthiuron at rate of 5.0kg a.i. ha-1 to physically test the model. In conclusion, the model showed the following ranking of herbicide uptake: sulfentrazone > picloram >tebuthiuron > hexazinone > metribuzin > simazine > ametryn > diuron > clomazone > acetochlor. Furthermore, the highest BCF herbicides showed higher Groundwater Ubiquity Score (GUS index indicating high leaching potential. We did not find tebuthiuron in plants after three months of herbicide application

  9. Axial Crush of the Tubular Structure with Various Cee-Shaped Cross-Sections

    International Nuclear Information System (INIS)

    Afshar, Reza; Ali, Aidy; Sahari, B B; Bayat, M

    2011-01-01

    Tubular structure with various Cee-shaped cross sections is numerically investigated in order to find the centre of gravity (COG) under axial crush by using program code of ANSYS/LS-DYNA. A subroutine is developed using this code to obtain the COG of deformed shape, during and after crush deformation. The effect of wall thickness of the structure on displacement of COG is also studied. Subsequently, the effect of opening angle of Cee become more prominent as the wall thickness of the structure decreases and as the thickness increases, displacement of the COG in crush direction almost stabilizes for all opening angle of Cee in the range of (10 0 - 90 0 ). Furthermore, Variation of I yy of structure with thicker wall for different cases of applied weight is approximately identical. The value of mass moment of inertia with respect to X and Z axes through the model COG (I zx ) in comparison with I yy can be neglected in the case of axial crush along Y direction.

  10. Determining yield loss caused by brown rust in production fields of sugarcane

    Science.gov (United States)

    Infections of Puccinia melanocephala, the causal agent of brown rust, appear on Louisiana sugarcane in the spring. Disease expression is usually limited to 2 to 3 months until temperatures exceed those favorable for spore production. The affected sugarcane is harvested 4 to 6 months after rust sympt...

  11. Glyphosate Control of Orange and Brown Rusts in Glyphosate-Sensitive Sugarcane Cultivars

    Science.gov (United States)

    Technical Abstract: Brown and orange rust diseases cause substantial yield reductions on sugarcane (Saccharum spp.) in Florida and other regions where sugarcane is grown. Brown rust caused by Puccinia melanocephala Syd. & P. Syd has been present in Florida since 1978 and orange rust caused by Pucci...

  12. Building organic matter of long-term sugarcane soils in a temperate environment

    Science.gov (United States)

    Mineral soils with a history of sugarcane monoculture cropping contain less soil organic matter (-35%), and plant macro- and micronutrients, including N (-20%), K (-26%), S (-7%), Ca (-8%), B (-33%), Zn (-88%), Mn (-29%), and Cu (-26%), than adjacent non-cultivated soils. Harvesting sugarcane ‘green...

  13. Status of Sugarcane yellow leaf virus and its impact in different progenies

    Science.gov (United States)

    Yellow leaf disease caused by Sugarcane yellow leaf virus (SCYLV) a Polerovirus is an important disease for sugarcane industries worldwide. High yield losses up to 50% were reported in susceptible varieties. Most of the commercial cultivars in Florida are infected with SCYLV; therefore, there is a ...

  14. Reducing dissolved inorganic nitrogen in surface runoff water from sugarcane production systems.

    Science.gov (United States)

    Webster, A J; Bartley, R; Armour, J D; Brodie, J E; Thorburn, P J

    2012-01-01

    Nitrogen (N) lost from farms, especially as the highly bioavailable dissolved inorganic form, may be damaging Australia's Great Barrier Reef (GBR). As sugarcane is the dominant cropping system in GBR catchments, its N management practises are coming under increasing scrutiny. This study measured dissolved inorganic N lost in surface runoff water and sugarcane productivity over 3 years. The experiment compared the conventional fertiliser N application rate to sugarcane (average 180kg N/ha/year) and a rate based on replacing N exported in the previous crop (average 94kg N/ha/year). Dissolved inorganic N losses in surface water were 72%, 48% and 66% lower in the three monitored years in the reduced N fertiliser treatment. There was no significant difference in sugarcane yield between the two fertiliser N treatments, nor any treatment difference in soil mineral N - both of these results are indicators of the sustainability of the lower fertiliser N applications. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. AMMI analysis to evaluate the adaptability and phenotypic stability of sugarcane genotypes

    Directory of Open Access Journals (Sweden)

    Luís Cláudio Inácio da Silveira

    2013-02-01

    Full Text Available Sugarcane (Saccharum sp. is one of the most important crops in Brazil. The high demand for sugarcane-derived products has stimulated the expansion of sugarcane cultivation in recent years, exploring different environments. The adaptability and the phenotypic stability of sugarcane genotypes in the Minas Gerais state, Brazil, were evaluated based on the additive main effects and multiplicative interaction (AMMI method. We evaluated 15 genotypes (13 clones and two checks: RB867515 and RB72454 in nine environments. The average of two cuttings for the variable tons of pol per hectare (TPH measure was used to discriminate genotypes. Besides the check RB867515 (20.44 t ha-1, the genotype RB987935 showed a high average TPH (20.71 t ha-1, general adaptability and phenotypic stability, and should be suitable for cultivation in the target region. The AMMI method allowed for easy visual identification of superior genotypes for each set of environments.

  16. Physical and Mechanical Characterization of Sugarcane Bagasse Particleboards for Civil Construction

    Directory of Open Access Journals (Sweden)

    Rosane Battistelle

    2016-12-01

    Full Text Available In the worldwide market of particleboard production, the use of alternative raw materials is increasing, due to high demand and lack of traditional raw material, despite efforts of reforestation. In Brazil, the main agricultural commodity is sugarcane due to the copious production of sugar and ethanol. In the state of São Paulo alone approximately 140 million tons of sugarcane bagasse are produced every year, from which around 70% is burned for energy production, not adding value to the residue and generating pollution to the environment; and the other 30% is sold for composting. The objective of this work is to add value to the sugarcane bagasse by using it as a raw material for particleboard production to be employed as flooring in the area of civil construction. To achieve this, the present research characterized the physical and mechanical characteristics of the particleboards with the following alternative raw materials: sugarcane bagasse and leaves of bamboo. Particleboards were produced to reach high density (0.8g/cm3 using the resin (bi-component polyurethane castor oil. Tests for abrasion, roughness and resistance to denting and wear (Janka hardness verified that the addition of leaves of bamboo in the mixtures, contrary to what was expected, did not confer a greater degree of resistance to the particleboards. Lastly, the results showed that sugarcane bagasse is a viable raw material alternative for the production of particleboards, intended to be used as products and flooring.

  17. Comparative performance of sugarcane bagasse and black polyethylene as mulch for squash (Cucurbita pepo L.) production

    Science.gov (United States)

    Louisiana processed 11.6 million mt of sugarcane in 2014, producing 1.36 million mt of raw sugar and an estimated 3.5 million mt of bagasse. Sugarcane bagasse is the fibrous material remaining after removing the sucrose, water, and other impurities (filter mud) from the millable sugarcane. Typically...

  18. Evaluation of potential crushed-salt constitutive models

    International Nuclear Information System (INIS)

    Callahan, G.D.; Loken, M.C.; Sambeek, L.L. Van; Chen, R.; Pfeifle, T.W.; Nieland, J.D.; Hansen, F.D.

    1995-12-01

    Constitutive models describing the deformation of crushed salt are presented in this report. Ten constitutive models with potential to describe the phenomenological and micromechanical processes for crushed salt were selected from a literature search. Three of these ten constitutive models, termed Sjaardema-Krieg, Zeuch, and Spiers models, were adopted as candidate constitutive models. The candidate constitutive models were generalized in a consistent manner to three-dimensional states of stress and modified to include the effects of temperature, grain size, and moisture content. A database including hydrostatic consolidation and shear consolidation tests conducted on Waste Isolation Pilot Plant and southeastern New Mexico salt was used to determine material parameters for the candidate constitutive models. Nonlinear least-squares model fitting to data from the hydrostatic consolidation tests, the shear consolidation tests, and a combination of the shear and hydrostatic tests produces three sets of material parameter values for the candidate models. The change in material parameter values from test group to test group indicates the empirical nature of the models. To evaluate the predictive capability of the candidate models, each parameter value set was used to predict each of the tests in the database. Based on the fitting statistics and the ability of the models to predict the test data, the Spiers model appeared to perform slightly better than the other two candidate models. The work reported here is a first-of-its kind evaluation of constitutive models for reconsolidation of crushed salt. Questions remain to be answered. Deficiencies in models and databases are identified and recommendations for future work are made. 85 refs

  19. Lithium storage into carbonaceous materials obtained from sugarcane bagasse

    International Nuclear Information System (INIS)

    Matsubara, Elaine Y.; Lala, Stella M.; Rosolen, Jose Mauricio

    2010-01-01

    Carbonaceous materials with different structures are prepared by carbonization of sugarcane bagasse. Depending on carbonization conditions, it is possible to obtain soot rich in flakes or in honeycomb-shaped micrometric particles, whose concentration has large influence on lithium storage into electrodes. The soot rich in honeycomb-shaped particles provides the best electrochemical performance, with a reversible specific capacity of 310 mAh g -1 . The results suggest that the sugarcane bagasse can be potentially used in the design of anodic materials for lithium ion batteries. (author)

  20. RNAseq Transcriptional Profiling following Whip Development in Sugarcane Smut Disease.

    Directory of Open Access Journals (Sweden)

    Patricia D C Schaker

    Full Text Available Sugarcane smut disease is caused by the biotrophic fungus Sporisorium scitamineum. The disease is characterized by the development of a whip-like structure from the primary meristems, where billions of teliospores are produced. Sugarcane smut also causes tillering and low sucrose and high fiber contents, reducing cane productivity. We investigated the biological events contributing to disease symptoms in a smut intermediate-resistant sugarcane genotype by examining the transcriptional profiles (RNAseq shortly after inoculating the plants and immediately after whip emission. The overall picture of disease progression suggests that premature transcriptional reprogramming of the shoot meristem functions continues until the emergence of the whip. The guidance of this altered pattern is potentially primarily related to auxin mobilization in addition to the involvement of other hormonal imbalances. The consequences associated with whip emission are the modulation of typical meristematic functions toward reproductive organ differentiation, requiring strong changes in carbon partitioning and energy production. These changes include the overexpression of genes coding for invertases and trehalose-6P synthase, as well as other enzymes from key metabolic pathways, such as from lignin biosynthesis. This is the first report describing changes in the transcriptional profiles following whip development, providing a hypothetical model and candidate genes to further study sugarcane smut disease progression.

  1. RNAseq Transcriptional Profiling following Whip Development in Sugarcane Smut Disease

    Science.gov (United States)

    Taniguti, Lucas M.; Peters, Leila P.; Creste, Silvana; Aitken, Karen S.; Van Sluys, Marie-Anne; Kitajima, João P.; Vieira, Maria L. C.; Monteiro-Vitorello, Claudia B.

    2016-01-01

    Sugarcane smut disease is caused by the biotrophic fungus Sporisorium scitamineum. The disease is characterized by the development of a whip-like structure from the primary meristems, where billions of teliospores are produced. Sugarcane smut also causes tillering and low sucrose and high fiber contents, reducing cane productivity. We investigated the biological events contributing to disease symptoms in a smut intermediate-resistant sugarcane genotype by examining the transcriptional profiles (RNAseq) shortly after inoculating the plants and immediately after whip emission. The overall picture of disease progression suggests that premature transcriptional reprogramming of the shoot meristem functions continues until the emergence of the whip. The guidance of this altered pattern is potentially primarily related to auxin mobilization in addition to the involvement of other hormonal imbalances. The consequences associated with whip emission are the modulation of typical meristematic functions toward reproductive organ differentiation, requiring strong changes in carbon partitioning and energy production. These changes include the overexpression of genes coding for invertases and trehalose-6P synthase, as well as other enzymes from key metabolic pathways, such as from lignin biosynthesis. This is the first report describing changes in the transcriptional profiles following whip development, providing a hypothetical model and candidate genes to further study sugarcane smut disease progression. PMID:27583836

  2. Toxic heavy metal contamination assessment and speciation in sugarcane soil

    Science.gov (United States)

    Wang, Xiaofei; Deng, Chaobing; Yin, Juan; Tang, Xiang

    2018-01-01

    The increasing heavy metal pollution in the sugarcane soils along the Great Huanjiang River was caused by leakage and spills of Lead (Pb) and Zinc (Zn) tailing dams during a flood event. Copper (Cu), Zn, Pb, Cadmium (Cd), and Arsenic (As) concentrations of soil samples collected from 16 different sites along the Great Huanjiang River coast typical pollution area were analyzed by Inductive Coupled Plasma Mass Spectrometry (ICP-MS). The mean concentrations of Pb, Cd, Zn, Cu, and As in the sugarcane soils were 151.57 mg/kg, 0.33 mg/kg, 155.52 mg/kg, 14.19 mg/kg, and 18.74 mg/kg, respectively. Results from the analysis of heavy metal speciation distribution showed that Cu, Zn, Pb, and Cd existed in weak acid, reducible, and oxidizable fractions, and the sum of these fractions accounted for significant proportions in sugarcane soils. However, the residual fraction of As with high proportion of reducible fraction indicated that this trace element still poses some environmental risk in the sugarcane soils because of its high content. Assessments of pollution levels revealed that the highest environmental risk was arouse by Pb. In addition, moderate to strong Cd and Zn pollution were found, while As has zero to medium level of pollution and Cu has zero level.

  3. Relationship between sugarcane rust severity and soil properties in louisiana.

    Science.gov (United States)

    Johnson, Richard M; Grisham, Michael P; Richard, Edward P

    2007-06-01

    ABSTRACT The extent of spatial and temporal variability of sugarcane rust (Puccinia melanocephala) infestation was related to variation in soil properties in five commercial fields of sugarcane (interspecific hybrids of Saccharum spp., cv. LCP 85-384) in southern Louisiana. Sugarcane fields were grid-soil sampled at several intensities and rust ratings were collected at each point over 6 to 7 weeks. Soil properties exhibited significant variability (coefficients of variation = 9 to 70.1%) and were spatially correlated in 39 of 40 cases with a range of spatial correlation varying from 39 to 201 m. Rust ratings were spatially correlated in 32 of 33 cases, with a range varying from 29 to 241 m. Rust ratings were correlated with several soil properties, most notably soil phosphorus (r = 0.40 to 0.81) and soil sulfur (r = 0.36 to 0.68). Multiple linear regression analysis resulted in coefficients of determination that ranged from 0.22 to 0.73, and discriminant analysis further improved the overall predictive ability of rust models. Finally, contour plots of soil properties and rust levels clearly suggested a link between these two parameters. These combined data suggest that sugarcane growers that apply fertilizer in excess of plant requirements will increase the incidence and severity of rust infestations in their fields.

  4. microRNAs Associated with Drought Response in the Bioenergy Crop Sugarcane (Saccharum spp.)

    Science.gov (United States)

    Vilela, Romel Duarte; Costa, Gustavo Gilson Lacerda; Dias, Lara Isys; Endres, Laurício; Menossi, Marcelo

    2012-01-01

    Sugarcane (Saccharum spp.) is one of the most important crops in the world. Drought stress is a major abiotic stress factor that significantly reduces sugarcane yields. However the gene network that mediates plant responses to water stress remains largely unknown in several crop species. Although several microRNAs that mediate post-transcriptional regulation during water stress have been described in other species, the role of the sugarcane microRNAs during drought stress has not been studied. The objective of this work was to identify sugarcane miRNAs that are differentially expressed under drought stress and to correlate this expression with the behavior of two sugarcane cultivars with different drought tolerances. The sugarcane cultivars RB867515 (higher drought tolerance) and RB855536 (lower drought tolerance) were cultivated in a greenhouse for three months and then subjected to drought for 2, 4, 6 or 8 days. By deep sequencing of small RNAs, we were able to identify 18 miRNA families. Among all of the miRNAs thus identified, seven were differentially expressed during drought. Six of these miRNAs were differentially expressed at two days of stress, and five miRNAs were differentially expressed at four days. The expression levels of five miRNAs (ssp-miR164, ssp-miR394, ssp-miR397, ssp-miR399-seq 1 and miR528) were validated by RT-qPCR (quantitative reverse transcriptase PCR). Six precursors and the targets of the differentially expressed miRNA were predicted using an in silico approach and validated by RT-qPCR; many of these targets may play important roles in drought tolerance. These findings constitute a significant increase in the number of identified miRNAs in sugarcane and contribute to the elucidation of the complex regulatory network that is activated by drought stress. PMID:23071617

  5. Diversity and antifungal activity of endophytic diazotrophic bacteria colonizing sugarcane in Egypt

    Science.gov (United States)

    The price of nitrogen continues to increase and is a major input in sugarcane production. Sugarcane grown in Egypt was screened for the presence of nitrogen-fixing bacteria. Nitrogen-free medium LGI-P was used to isolate bacteria from cane stalks. Among the 52 isolates subjected to acetylene redu...

  6. Roles of Non-Coding RNA in Sugarcane-Microbe Interaction.

    Science.gov (United States)

    Thiebaut, Flávia; Rojas, Cristian A; Grativol, Clícia; Calixto, Edmundo P da R; Motta, Mariana R; Ballesteros, Helkin G F; Peixoto, Barbara; de Lima, Berenice N S; Vieira, Lucas M; Walter, Maria Emilia; de Armas, Elvismary M; Entenza, Júlio O P; Lifschitz, Sergio; Farinelli, Laurent; Hemerly, Adriana S; Ferreira, Paulo C G

    2017-12-20

    Studies have highlighted the importance of non-coding RNA regulation in plant-microbe interaction. However, the roles of sugarcane microRNAs (miRNAs) in the regulation of disease responses have not been investigated. Firstly, we screened the sRNA transcriptome of sugarcane infected with Acidovorax avenae . Conserved and novel miRNAs were identified. Additionally, small interfering RNAs (siRNAs) were aligned to differentially expressed sequences from the sugarcane transcriptome. Interestingly, many siRNAs aligned to a transcript encoding a copper-transporter gene whose expression was induced in the presence of A. avenae , while the siRNAs were repressed in the presence of A. avenae . Moreover, a long intergenic non-coding RNA was identified as a potential target or decoy of miR408. To extend the bioinformatics analysis, we carried out independent inoculations and the expression patterns of six miRNAs were validated by quantitative reverse transcription-PCR (qRT-PCR). Among these miRNAs, miR408-a copper-microRNA-was downregulated. The cleavage of a putative miR408 target, a laccase, was confirmed by a modified 5'RACE (rapid amplification of cDNA ends) assay. MiR408 was also downregulated in samples infected with other pathogens, but it was upregulated in the presence of a beneficial diazotrophic bacteria. Our results suggest that regulation by miR408 is important in sugarcane sensing whether microorganisms are either pathogenic or beneficial, triggering specific miRNA-mediated regulatory mechanisms accordingly.

  7. Roles of Non-Coding RNA in Sugarcane-Microbe Interaction

    Science.gov (United States)

    Grativol, Clícia; Motta, Mariana R.; Ballesteros, Helkin G. F.; Peixoto, Barbara; Vieira, Lucas M.; Walter, Maria Emilia; de Armas, Elvismary M.; Entenza, Júlio O. P.; Lifschitz, Sergio; Farinelli, Laurent; Hemerly, Adriana S.

    2017-01-01

    Studies have highlighted the importance of non-coding RNA regulation in plant-microbe interaction. However, the roles of sugarcane microRNAs (miRNAs) in the regulation of disease responses have not been investigated. Firstly, we screened the sRNA transcriptome of sugarcane infected with Acidovorax avenae. Conserved and novel miRNAs were identified. Additionally, small interfering RNAs (siRNAs) were aligned to differentially expressed sequences from the sugarcane transcriptome. Interestingly, many siRNAs aligned to a transcript encoding a copper-transporter gene whose expression was induced in the presence of A. avenae, while the siRNAs were repressed in the presence of A. avenae. Moreover, a long intergenic non-coding RNA was identified as a potential target or decoy of miR408. To extend the bioinformatics analysis, we carried out independent inoculations and the expression patterns of six miRNAs were validated by quantitative reverse transcription-PCR (qRT-PCR). Among these miRNAs, miR408—a copper-microRNA—was downregulated. The cleavage of a putative miR408 target, a laccase, was confirmed by a modified 5′RACE (rapid amplification of cDNA ends) assay. MiR408 was also downregulated in samples infected with other pathogens, but it was upregulated in the presence of a beneficial diazotrophic bacteria. Our results suggest that regulation by miR408 is important in sugarcane sensing whether microorganisms are either pathogenic or beneficial, triggering specific miRNA-mediated regulatory mechanisms accordingly. PMID:29657296

  8. Roles of Non-Coding RNA in Sugarcane-Microbe Interaction

    Directory of Open Access Journals (Sweden)

    Flávia Thiebaut

    2017-12-01

    Full Text Available Studies have highlighted the importance of non-coding RNA regulation in plant-microbe interaction. However, the roles of sugarcane microRNAs (miRNAs in the regulation of disease responses have not been investigated. Firstly, we screened the sRNA transcriptome of sugarcane infected with Acidovorax avenae. Conserved and novel miRNAs were identified. Additionally, small interfering RNAs (siRNAs were aligned to differentially expressed sequences from the sugarcane transcriptome. Interestingly, many siRNAs aligned to a transcript encoding a copper-transporter gene whose expression was induced in the presence of A. avenae, while the siRNAs were repressed in the presence of A. avenae. Moreover, a long intergenic non-coding RNA was identified as a potential target or decoy of miR408. To extend the bioinformatics analysis, we carried out independent inoculations and the expression patterns of six miRNAs were validated by quantitative reverse transcription-PCR (qRT-PCR. Among these miRNAs, miR408—a copper-microRNA—was downregulated. The cleavage of a putative miR408 target, a laccase, was confirmed by a modified 5′RACE (rapid amplification of cDNA ends assay. MiR408 was also downregulated in samples infected with other pathogens, but it was upregulated in the presence of a beneficial diazotrophic bacteria. Our results suggest that regulation by miR408 is important in sugarcane sensing whether microorganisms are either pathogenic or beneficial, triggering specific miRNA-mediated regulatory mechanisms accordingly.

  9. Environmental Impacts of Sand Exploitation. Analysis of Sand Market

    Directory of Open Access Journals (Sweden)

    Marius Dan Gavriletea

    2017-06-01

    Full Text Available Sand is an indispensable natural resource for any society. Despite society’s increasing dependence on sand, there are major challenges that this industry needs to deal with: limited sand resources, illegal mining, and environmental impact of sand mining. The purpose of this paper is twofold: to present an overview of the sand market, highlighting the main trends and actors for production, export and import, and to review the main environmental impacts associated with sand exploitation process. Based on these findings, we recommend different measures to be followed to reduce negative impacts. Sand mining should be done in a way that limits environmental damage during exploitation and restores the land after mining operations are completed.

  10. Butanol-acetone fermentation of sugar-cane juice

    Energy Technology Data Exchange (ETDEWEB)

    Perdomo, E V

    1958-01-01

    Sixteen new varieties of Clostridium acetobutylicum of varying activity were isolated from different sources. The most active one was obtained from sugar-cane roots. The effects of 86 additives were studied. The following formulation gave a 32% yield (with respect to sucrose) of solvent mixture (73% BuOH, 19 to 23% acetone, and 3 to 4% EtOH) sugar-cane juice (I) (20/sup 0/ Brix) 250 ml, ground Vicia sativa 1 g, KH/sub 2/PO/sub 4/ 2.5 g, CaCO/sub 3/ 4 g, H/sub 2/O 1000 ml; the pH of this solution was 5.6 to 6.0. Unclarified, it was inverted by invertase; the other components were added and the mixture was sterilized (20 minutes, 15 pounds).

  11. Role of mutation breeding in sugarcane improvement

    International Nuclear Information System (INIS)

    Shama Rao, H.K.

    1980-01-01

    Bud setts of a popular sugarcane var. Co-419 irradiated with Co 60 gamma rays produced wide genetic variations. It was easy to rapidly multiply and maintain the mutants appearing in the MV1 generation by repeated vegetative propagations. Two promising mutants (TS-1 and TS-8) found stable over 8 vegetative generations show increased cane girth and weight, enhanced sucrose content and possible early maturity, as compared to var. Co-419. Large scale field trials under different agroclimatic conditions for yield and mill tests are in progress in collaboration with some of the leading sugar factories in the country. Simultaneously, they are also being tested for disease resistance and agronomic performance at several Government Sugarcane Research Stations. Results obtained so far are presented. (author)

  12. An overview of sugarcane brown rust in Cuba

    Directory of Open Access Journals (Sweden)

    María La O

    Full Text Available ABSTRACT: Multiple pathogens affect sugarcane, among them Puccinia melanocephala, the causal agent of brown rust. This disease was first reported in Cuba in 1979 when it was responsible for a severe attack on the main sugarcane variety B4362. The aims of the present study were to give an overview of sugarcane brown rust in Cuba and show the current disease situation in the country. A retrospective analysis regard to sugarcane cultivar composition resistant to brown rust in Cuba was carried out. In addition 154 genotypes, including the most used progenitors in the breeding program and commercial varieties were evaluated under natural infection conditions. The identity of P. melanocephala was verified by Polymerase Chain Reaction (PCR and by sequencing the ITS1 region. After the introduction of P. melanocephala into Cuba, the susceptible variety, B4362, was replaced by Ja60-5 which remained resistant until 1998. Since 2002, a varietal policy supported by a governmental resolution establishing that any single cultivar cannot occupy more than 20 % of the production area for each production company, local area and province, has been applied. Out of the genotypes evaluated, 49 showed resistance to the disease and 35 intermediate behavior, while 39 were susceptible and 31, highly susceptible. P. melanocephala was detected by PCR in all symptomatic samples and its identify confirmed by sequencing the ITS1 region. The adopted measurement together with permanent phytosanitary monitoring and commercial release of resistant or intermediate cultivars succeeded in avoiding any new epidemic. Inoculum pressure was reduced, even on susceptible and highly susceptible varieties since, by resolution, they cannot occupy more than 10 % of the planted area.

  13. Life cycle assessment of sugarcane ethanol production in India in comparison to Brazil

    NARCIS (Netherlands)

    Tsiropoulos, Ioannis; Faaij, André P C; Seabra, Joaquim E A; Lundquist, Lars; Schenker, Urs; Briois, Jean François; Patel, Martin K.

    2014-01-01

    Purpose: India's biofuel programme relies on ethanol production from sugarcane molasses. However, there is limited insight on environmental impacts across the Indian ethanol production chain. This study closes this gap by assessing the environmental impacts of ethanol production from sugarcane

  14. Sugarcane Genotype Performance in Three Environments (Based on Crop Cycle) at Mardan, Pakistan

    Science.gov (United States)

    Sugarcane breeders often face significant genotype x environment interactions in their trials grown under multiple environments. Hence, genotypes need to be tested for their stability across different environments keeping in view the significant interactions. An experiment comprising 28 sugarcane ge...

  15. Analysis of the engine fragment threat and the crush environment for small packages carried on U.S. commercial jet aircraft

    International Nuclear Information System (INIS)

    Hartman, W.F.; McClure, J.D.; von Riesemann, W.A.

    1978-01-01

    The results of two separate analyses are reported. The engine fragment analysis determined the probability of a small package being in the path of a fragment from a failure in a gas turbine engine. The calculated values show that, depending on aircraft type, the incidence rate varies by approximately an order of magnitude from a high of about once per 5 million flights to a low of nearly once every 40 million package flights for a flight of five hours' duration. The analysis of the crush environment consisted of an examination of two principal crush modes, i.e., vertical and longitudinal crush. The vertical crush mode was examined by formulating a structural model of the cargo deck beams of the aircraft. The longitudinal crush mode was studied by using dynamic models of the aircraft cargo and the radioactive material package (RAM). The results of the analysis of these crush modes provided the basis for the formulation of a 310 kN/(70,000 lb) crush test to simulate vertical crush. The longitudinal crush analysis indicated that it was possible, under infrequently occurring conditions, to produce extremely large crush forces and hence it was recommended that RAM packages be located in the aft end of aircraft cargo compartments to minimize the effects of longitudinal crush

  16. Callus induction, regeneration and transformation of sugarcane ...

    African Journals Online (AJOL)

    Yomi

    2012-03-22

    Mar 22, 2012 ... dichlorophenoxyacetic acid (2,4-D), naphthalene acetic acid (NAA), yeast extract and coconut water .... transformed (control) plantlets using CTAB method (Doyle and .... Embryogenic Sugarcane Callus by Image Analysis.

  17. Analysis of a hypothetical dropped spent nuclear fuel shipping cask impacting a floor mounted crush pad

    International Nuclear Information System (INIS)

    Hawkes, B.D.; Uldrich, E.D.

    1998-03-01

    A crush pad has been designed and analyzed to absorb the kinetic energy of a hypothetically dropped spent nuclear fuel shipping cask into a 44-ft. deep cask unloading pool at the Idaho Chemical Processing Plant. The 110-ton Large Cell Cask was assumed to be accidentally dropped onto the parapet of the unloading pool, causing the cask to tumble through the pool water and impact the floor mounted crush pad with the cask's top corner. The crush pad contains rigid polyurethane foam, which was modeled in a separate computer analysis to simulate the manufacturer's testing of the foam and to determine the foam's stress and strain characteristics. This computer analysis verified that the foam was accurately represented in the analysis to follow. A detailed non-linear, dynamic finite element analysis was then performed on the crush pad and adjacent pool structure to assure that a drop of this massive cask does not result in unacceptable damage to the storage facility. Additionally, verification was made that the crush pad adequately protects the cask from severe impact loading. At impact, the cask has significant vertical, horizontal and rotational velocities. The crush pad absorbs much of the energy of the cask through plastic deformation during primary and secondary impacts. After the primary impact with the crush pad, the cask still has sufficient energy to rebound and rotate until it impacts the pool wall. An assessment is made of the damage to the crush pad and pool wall and of the impact loading on the cask

  18. A benchmark study of procedures for analysis of axial crushing of bulbous bows

    DEFF Research Database (Denmark)

    Yamada, Yasuhira; Pedersen, Preben Terndrup

    2008-01-01

    Simplified methods to estimate mean axial crushing forces of plated structures are reviewed and applied to a series of experimental results for axial crushing of large-scale bulbous bow models. Methods based on intersection unit elements such as L-, T- and X-type elements as well as methods based...

  19. Soil Carbon and Nitrogen Stocks of Different Hawaiian Sugarcane Cultivars

    Directory of Open Access Journals (Sweden)

    Rebecca Tirado-Corbalá

    2015-06-01

    Full Text Available Sugarcane has been widely used as a biofuel crop due to its high biological productivity, ease of conversion to ethanol, and its relatively high potential for greenhouse gas reduction and lower environmental impacts relative to other derived biofuels from traditional agronomic crops. In this investigation, we studied four sugarcane cultivars (H-65-7052, H-78-3567, H-86-3792 and H-87-4319 grown on a Hawaiian commercial sugarcane plantation to determine their ability to store and accumulate soil carbon (C and nitrogen (N across a 24-month growth cycle on contrasting soil types. The main study objective establish baseline parameters for biofuel production life cycle analyses; sub-objectives included (1 determining which of four main sugarcane cultivars sequestered the most soil C and (2 assessing how soil C sequestration varies among two common Hawaiian soil series (Pulehu-sandy clay loam and Molokai-clay. Soil samples were collected at 20 cm increments to depths of up to 120 cm using hand augers at the three main growth stages (tillering, grand growth, and maturity from two experimental plots at to observe total carbon (TC, total nitrogen (TN, dissolved organic carbon (DOC and nitrates (NO−3 using laboratory flash combustion for TC and TN and solution filtering and analysis for DOC and NO−3. Aboveground plant biomass was collected and subsampled to determine lignin and C and N content. This study determined that there was an increase of TC with the advancement of growing stages in the studied four sugarcane cultivars at both soil types (increase in TC of 15–35 kg·m2. Nitrogen accumulation was more variable, and NO−3 (<5 ppm were insignificant. The C and N accumulation varies in the whole profile based on the ability of the sugarcane cultivar’s roots to explore and grow in the different soil types. For the purpose of storing C in the soil, cultivar H-65-7052 (TC accumulation of ~30 kg·m−2 and H-86-3792 (25 kg·m−2 rather H-78

  20. Adaptation of oral medication in people institutionalized in nursing homes for whom medication is crushed: The ADECUA Study

    Directory of Open Access Journals (Sweden)

    Francisco Apolo Carvajal

    2016-12-01

    Full Text Available Purpose: To evaluate the effect of pharmacist interventions in the adaptation of pharmaceutical forms in elders institutionalized in nursing homes whose medicines are crushed, which may have a clinical relevance. Methods: Quasi-experimental, multicenter, transversal and prospective study carried out in 10 nursing homes. Subjects for whom drugs were being crushed were identified. Their treatments were reviewed in order to identify drugs that should not be crushed. In these cases, we proposed an alternative to the physician and we evaluated the degree of acceptance, its association to other variables and the pre-post adaptation index (tablets that can be crushed and capsules that can be opened/ total number of tablets and capsules before and after the intervention. Moreover, health professionals received a training course. Results: Medication was being crushed for 33% (618/1875 of residents (mean: 5 drugs susceptible of crushing. 220 pharmaceutical interventions were performed, mostly in extended release or gastro-resistant drugs (48% were accepted. Switch was the type of intervention more frequent (79%, mainly to Purpose: To evaluate the effect of pharmacist interventions in the adaptation of pharmaceutical forms in elders institutionalized in nursing homes whose medicines are crushed, which may have a clinical relevance. Methods: Quasi-experimental, multicenter, transversal and prospective study carried out in 10 nursing homes. Subjects for whom drugs were being crushed were identified. Their treatments were reviewed in order to identify drugs that should not be crushed. In these cases, we proposed an alternative to the physician and we evaluated the degree of acceptance, its association to other variables and the pre-post adaptation index (tablets that can be crushed and capsules that can be opened/ total number of tablets and capsules before and after the intervention. Moreover, health professionals received a training course. Results

  1. Plant resistance in sorghums to the sugarcane aphid Melanaphis sacchari (Hemiptera: Aphididae)

    Science.gov (United States)

    We evaluated ten sorghum lines that were near or in commercial release with the intent of identifying phenotypic expression of host-plant resistance to the sugarcane aphid. Two of the ten entries OL2042 and SP7715 expressed a high degree of resistance to the sugarcane aphid with damage ratings <3.0...

  2. Effect of crushing temperature on virgin olive oil quality and composition

    OpenAIRE

    Ö. Kula; A. Yıldırım; A. Yorulmaz; M. Duran; İ. Mutlu; M. Kıvrak

    2018-01-01

    The objective of the current study was to assess the influence of a modified crushing process and kneading operation on the quality parameters, volatile compounds, and the fatty acid and sterol profiles of virgin olive oil from the Edremit yaglik variety. In the study, olive oil samples were produced in two different processes. The first one was produced without malaxation and the second one was produced with the malaxing process. During crushing, the effect of different temperatures was test...

  3. Considerations when ranking stochastically modeled oil sands resource models for mining applications

    Energy Technology Data Exchange (ETDEWEB)

    Etris, E.L. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Petro-Canada, Calgary, AB (Canada); Idris, Y.; Hunter, A.C. [Petro-Canada, Calgary, AB (Canada)

    2008-10-15

    Alberta's Athabasca oil sands deposit has been targeted as a major resource for development. Bitumen recovery operations fall into 2 categories, namely mining and in situ operations. Mining recovery is done above ground level and consists of open pit digging, disaggregation of the bitumen-saturated sediment through crushing followed by pipeline transport in a water-based slurry and then separation of oil, water and sediment. In situ recovery consists of drilling wells and stimulating the oil sands in the subsurface with a thermal treatment to reduce the viscosity of the bitumen and allow it to come to the surface. Steam assisted gravity drainage (SAGD) is the most popular thermal treatment currently in use. Resource models that simulate the recovery process are needed for both mining and in situ recovery operations. Both types can benefit from the advantages of a stochastic modeling process for resource model building and uncertainty evaluation. Stochastic modeling provides a realistic geology and allows for multiple realizations, which mining operations can use to evaluate the variability of recoverable bitumen volumes and develop mine plans accordingly. This paper described the processes of stochastic modelling and of determining the appropriate single realization for mine planning as applied to the Fort Hills oil sands mine which is currently in the early planning stage. The modeling exercise was used to estimate the in-place resource and quantify the uncertainty in resource volumes. The stochastic models were checked against those generated from conventional methods to identify any differences and to make the appropriate adaptations. 13 refs., 3 tabs., 16 figs.

  4. Exogenous nitric oxide improves sugarcane growth and photosynthesis under water deficit.

    Science.gov (United States)

    Silveira, Neidiquele M; Frungillo, Lucas; Marcos, Fernanda C C; Pelegrino, Milena T; Miranda, Marcela T; Seabra, Amedea B; Salgado, Ione; Machado, Eduardo C; Ribeiro, Rafael V

    2016-07-01

    Nitric oxide (NO)-mediated redox signaling plays a role in alleviating the negative impact of water stress in sugarcane plants by improving root growth and photosynthesis. Drought is an environmental limitation affecting sugarcane growth and yield. The redox-active molecule nitric oxide (NO) is known to modulate plant responses to stressful conditions. NO may react with glutathione (GSH) to form S-nitrosoglutathione (GSNO), which is considered the main reservoir of NO in cells. Here, we investigate the role of NO in alleviating the effects of water deficit on growth and photosynthesis of sugarcane plants. Well-hydrated plants were compared to plants under drought and sprayed with mock (water) or GSNO at concentrations ranging from 10 to 1000 μM. Leaf GSNO sprayed plants showed significant improvement of relative water content and leaf and root dry matter under drought compared to mock-sprayed plants. Additionally, plants sprayed with GSNO (≥ 100 μM) showed higher leaf gas exchange and photochemical activity as compared to mock-sprayed plants under water deficit and after rehydration. Surprisingly, a raise in the total S-nitrosothiols content was observed in leaves sprayed with GSH or GSNO, suggesting a long-term role of NO-mediated responses to water deficit. Experiments with leaf discs fumigated with NO gas also suggested a role of NO in drought tolerance of sugarcane plants. Overall, our data indicate that the NO-mediated redox signaling plays a role in alleviating the negative effects of water stress in sugarcane plants by protecting the photosynthetic apparatus and improving shoot and root growth.

  5. Mites associated with sugarcane crop and with native trees from adjacent Atlantic forest fragment in Brazil.

    Science.gov (United States)

    Duarte, Mércia E; Navia, Denise; dos Santos, Lucas R; Rideiqui, Pedro J S; Silva, Edmilson S

    2015-08-01

    In some Brazilian regions the Atlantic forest biome is currently restrict to fragments occurring amid monocultures, as sugarcane crops in the Northeast region. Important influence of forest remnants over mite fauna of permanent crops have been showed, however it has been poorly explored on annual crops. The first step for understanding ecological relationship in an agricultural systems is known its composition. The objective of this study was to investigate the plant-inhabiting mite fauna associated with sugarcane crop (Saccharum officinarum L.) (Poaceae) and caboatã (Cupania oblongifolia Mart.) (Sapindaceae) trees in the state of Alagoas, Brazil. Sugarcane stalks and sugarcane and caboatã apical, middle and basal leaves were sampled. A total of 2565 mites were collected from sugarcane and classified into seven families of Trombidiformes and Mesostigmata orders, with most individuals belonging to the Eriophyidae, Tetranychidae and Tarsonemidae families. Among predatory mites, the Phytoseiidae were the most common. A total of 1878 mites were found on C. oblongifolia and classified into 13 families of Trombidiformes and Mesostigmata orders. The most abundant phytophagous mite family on caboatã was also Eriophyidae. In contrast to sugarcane, Ascidae was the most common predatory mite family observed in caboatã. No phytophagous species were common to both sugarcane and C. oblongifolia. However two predatory mites were shared between host plants. Although mites associated with only one native species in the forest fragment were evaluated in this study, our preliminary results suggest Atlantic forest native vegetation can present an important role in the sugarcane agricultural system as a source of natural enemies.

  6. Diffusion in crushed rock and in bentonite clay

    International Nuclear Information System (INIS)

    Olin, M.

    1994-04-01

    Diffusion theories for porous media with sorption are reviewed to serve as a basis for considering diffusion in simple systems like sand of crushed rock. A Fickian diffusion and linear sorption model is solved both by analytical Laplance transform and Green's function methods and by numerical methods, and then applied to small-scale experiments for Finnish low- and medium-level operating waste repositories. The main properties of bentonite are reviewed. The hydraulic conductivity of compacted bentonite is so low that the major transport mechanism is diffusion. A Fickian diffusion and linear sorption model is applied to bentonite. The main component of bentonite, montmorillonite, has a high ion-exchange capacity and thus, transport in bentonite consists of interactive chemical and diffusion phenomena. A chemical equilibrium model, CHEQ, is developed for ion-exchange reactions in bentonite water systems. CHEQ is applied to some bentonite experiments with success, especially for monovalent ions. The fitted log-binding constants for sodium exchange with potassium, magnesium, and calcium were 0.27, 1.50, and 2.10, respectively. A coupled chemical and diffusion model, CHEQDIFF, is developed to take account of diffusion in pore water, surface diffusion and ion-exchange reactions. The model is applied to the same experiments as CHEQ, and validation is partly successful. In the diffusion case, the above-mentioned values for binding constants are used. The apparent diffusion (both anions and cations) and surface diffusion (only for cations) constants used are 3.0*10 -11 m 2 /s and 6.0*10 -12 m 2 /s, respectively, but these values are questionable, as experimental results good enough for fitting are not available. (orig.). (74 refs., 27 figs., 12 tabs.)

  7. Development of a Crush and Mix Machine for Composite Brick Fabrication

    International Nuclear Information System (INIS)

    Sothea, Kruy; Fazli, Nik; Hamdi, M.; Aoyama, Hideki

    2011-01-01

    Currently, people are more and more concerned about the environmental protection. Municipal solid wastes (MSW) have bad effect on the environment and also human health. In addition, the amounts of municipal solid wastes are increasing due to the economic development, density of population, especially in the developing countries and they are recycled in a little percentage. To address this problem, the composite brick forming machine was designed and developed to make brick using combination of MSW and mortar. The machine consists of two independent parts, crusher and mixer part, and molding part. This paper explores the design of crusher and mixer part. The crusher has ability to cut MSW such as wood, paper and plastic into small size. There are two mixers; one is used for making mortar and other use for making slurry. FEA analyses were carried out to address the suitable strength of the critical parts of the crusher which ensures that crusher can run properly with high efficiency. The experimentation of the crusher shows that it has high performance for cutting MSW. The mixers also work very well in high efficiency. The results of composite brick testing have been shown that ability of the machine can performance well. This is the innovation of crush and mix machine which is portable and economic by using MSW in replacement of sand.

  8. Magnetic resonance imaging evaluation of acute crush injury of rabbit sciatic nerve: correlation with histology

    International Nuclear Information System (INIS)

    Li, X.; Shen, J.; Chen, J.; Wang, X.; Liu, Q.; Liang, B.

    2008-01-01

    To investigate the relation between the quantitative assessment of magnetic resonance imaging (MRI) features and the correlation with histology and functional recovery by using the rabbit sciatic nerve crush model. In New Zealand, 32 rabbits were randomly divided into 2 groups (group A and B); all rabbits underwent crushing injury of their left sciatic nerve. In group A (n = 16), the sciatic nerves were crushed by using microvessel clamps with a strength of 3.61 kg. In group B (n = 16), the sciatic nerves were crushed with a strength of 10.50 kg. Right sciatic nerves were served as controls. Serial MRI of both hind limbs in each rabbit was performed before and at the time point of 1, 2, 4, and 8 weeks after crushed injury. The MRI protocol included T1-weighted spin-echo (T1WI), 3 dimension turbo spin-echo T2-weighted (3DT2WI), T2-weighted turbo spin-echo images with spectral presaturation with inversion recovery (T2WI/SPIR), balanced fast-field echo (B-FFE) and short-time inversion recovery (STIR) sequences. The coronal image of the sciatic nerve was obtained. The nerve and muscle signal ratio (SIR) on each sequence was measured. The function recovery was observed and pathological examination was performed at each time point. A signal intensity increase of the distal segment of crushed sciatic nerves was found on 3DT2WI, T2WI/SP1R, B-FFE, and STIR, but not on T,WI images. Of 32 crushed nerves, 30 nerves showed high signal intensity. The correct diagnostic rate was 93.75% with false negative-positive of 6.25%. The SIR of the crushed sciatic nerve at distal portion was higher than those of the control nerves; there was a statistically significant difference (P 0.05). The SIR between group A and group B was not found statistically significantly different (P > 0.05). The SIR of crushed nerves at distal portion increased at one week after the crush injury, subsequently further increased, and reached a maximum at 2 weeks. The pathological examination revealed myelin

  9. Sugarcane trash management assessed by the interaction of yield with soil properties

    Directory of Open Access Journals (Sweden)

    Flávio Carlos Dalchiavon

    2013-12-01

    Full Text Available Currently, sugarcane plays an important global role, particularly with a view to alternative energy sources. Thus, in a sugarcane field of the mill Vale do Paraná S/A Álcool e Açúcar, Rubineia, São Paulo State, managed under two green cane harvest systems (cane trash left on and cane trash removed from the soil, Pearson and spatial correlations between the sugarcane yield (variety RB855035 in the third cut and soil physical and chemical properties were studied to identify the property best correlated with stalk yield and the best harvest method. For this purpose, two geostatistical grids (121 sampling points on 1.30 ha were installed on a eutrophic Red Argisol (homogeneous slope of 0.065 m m-1, in 2011, to determine the properties: stalk yield and sugarcane plant population, and soil resistance to penetration, gravimetric moisture, bulk density, and carbon stock, in the layers 0-0.20 and 0.20-0.40 m. The data were analyzed by descriptive, linear correlation and geostatistical analysis. In both treatments, the property stand density was best correlated with sugarcane yield (r = 0.725 in the trash mulching treatment - TM and r = 0.769 in the trash removal treatment - TR. However, in relation to the soil properties, bulk density (0-0.20 m was best correlated (r = 0.305 in TM, r = 0.211 in TR. Similarly, from the spatial point of view, stand density was the property that best explained the sugarcane yield. However, in the TM treatment the density (0.20-0.40 m was the only soil property spatially correlated with stalk yield. The carbon stock in the soil of the TM was 11.5 % higher than in the TR treatment. Results of the TM treatment were best, also with regard to soil management and conservation.

  10. Using normalized difference vegetation index (NDVI) to estimate sugarcane yield and yield components

    Science.gov (United States)

    Sugarcane (Saccharum spp.) yield and yield components are important traits for growers and scientists to evaluate and select cultivars. Collection of these yield data would be labor intensive and time consuming in the early selection stages of sugarcane breeding cultivar development programs with a ...

  11. Identifying Quantitative Trait Loci (QTLs) and Developing Diagnostic Markers Linked to Orange Rust Resistance in Sugarcane (Saccharum spp.).

    Science.gov (United States)

    Yang, Xiping; Islam, Md S; Sood, Sushma; Maya, Stephanie; Hanson, Erik A; Comstock, Jack; Wang, Jianping

    2018-01-01

    Sugarcane ( Saccharum spp.) is an important economic crop, contributing up to 80% of table sugar used in the world and has become a promising feedstock for biofuel production. Sugarcane production has been threatened by many diseases, and fungicide applications for disease control have been opted out for sustainable agriculture. Orange rust is one of the major diseases impacting sugarcane production worldwide. Identifying quantitative trait loci (QTLs) and developing diagnostic markers are valuable for breeding programs to expedite release of superior sugarcane cultivars for disease control. In this study, an F 1 segregating population derived from a cross between two hybrid sugarcane clones, CP95-1039 and CP88-1762, was evaluated for orange rust resistance in replicated trails. Three QTLs controlling orange rust resistance in sugarcane (qORR109, qORR4 and qORR102) were identified for the first time ever, which can explain 58, 12 and 8% of the phenotypic variation, separately. We also characterized 1,574 sugarcane putative resistance ( R ) genes. These sugarcane putative R genes and simple sequence repeats in the QTL intervals were further used to develop diagnostic markers for marker-assisted selection of orange rust resistance. A PCR-based Resistance gene-derived maker, G1 was developed, which showed significant association with orange rust resistance. The putative QTLs and marker developed in this study can be effectively utilized in sugarcane breeding programs to facilitate the selection process, thus contributing to the sustainable agriculture for orange rust disease control.

  12. Feruloyl esterase from Aspergillus clavatus improves xylan hydrolysis of sugarcane bagasse

    Directory of Open Access Journals (Sweden)

    Dyoni M. de Oliveira

    2016-12-01

    Full Text Available Feruloyl esterase is a subclass of carboxylic acid esterases with the capacity to release ferulic acid and other cinnamic acids from plant cell walls and synthetic substrates. Feruloyl esterases act synergistically with xylanases removing ferulic acid residues esterified to arabinoxylans. Feruloyl esterase type D from Aspergillus clavatus (AcFAE was expressed in Escherichia coli, purified, and applied with a commercial xylanase consortium (Novozymes for hydrolysis of sugarcane bagasse. Feruloyl esterase plus xylanase increased 5.13-fold the releasing of ferulic acid from sugarcane bagasse. Removal of only 7.7% of ferulic acid content by AcFAE increased 97.3% the sugarcane bagasse hydrolysis by xylanase. These data support the use of AcFAE as an interesting adjuvant enzyme to improve lignocellulose digestion and biotechnological tool for biorefineries.

  13. Celecoxib accelerates functional recovery after sciatic nerve crush in the rat

    Directory of Open Access Journals (Sweden)

    Fernández-Garza Nancy E

    2008-11-01

    Full Text Available Abstract The inflammatory response appears to be essential in the modulation of the degeneration and regeneration process after peripheral nerve injury. In injured nerves, cyclooxygenase-2 (COX-2 is strongly upregulated around the injury site, possibly playing a role in the regulation of the inflammatory response. In this study we investigated the effect of celecoxib, a COX-2 inhibitor, on functional recovery after sciatic nerve crush in rats. Unilateral sciatic nerve crush injury was performed on 10 male Wistar rats. Animals on the experimental group (n = 5 received celecoxib (10 mg/kg ip immediately before the crush injury and daily for 7 days after the injury. Control group (n = 5 received normal saline at equal regimen. A sham group (n = 5, where sciatic nerve was exposed but not crushed, was also evaluated. Functional recovery was then assessed by calculating the sciatic functional index (SFI on days 0,1,7,14 and 21 in all groups, and registering the day of motor and walking onset. In comparison with control group, celecoxib treatment (experimental group had significant beneficial effects on SFI, with a significantly better score on day 7. Anti-inflammatory drug celecoxib should be considered in the treatment of peripheral nerve injuries, but further studies are needed to explain the mechanism of its neuroprotective effects.

  14. Sugarcane productivity correlated with physical-chemical attributes to create soil management zone

    Directory of Open Access Journals (Sweden)

    Flávio Carlos Dalchiavon

    2013-10-01

    Full Text Available The socioeconomic importance of sugar cane in Brazil is unquestionable because it is the raw material for the production of ethanol and sugar. The accurate spatial intervention in the management of the crop, resulting zones of soil management, increases productivity as well as its agricultural yields. The spatial and Person's correlations between sugarcane attributes and physico-chemical attributes of a Typic Tropustalf were studied in the growing season of 2009, in Suzanápolis, State of São Paulo, Brazil (20°28'10'' S lat.; 50°49'20'' W long., in order to obtain the one that best correlates with agricultural productivity. Thus, the geostatistical grid with 120 sampling points was installed to soil and data collection in a plot of 14.6 ha with second crop sugarcane. Due to their substantial and excellent linear and spatial correlations with the productivity of the sugarcane, the population of plants and the organic matter content of the soil, by evidencing substantial correlations, linear and spatial, with the productivity of sugarcane, were indicators of management zones strongly attached to such productivity.

  15. A TaqMan Real-Time PCR Assay for Detection and Quantification of Sporisorium scitamineum in Sugarcane

    Directory of Open Access Journals (Sweden)

    Yachun Su

    2013-01-01

    Full Text Available Sporisorium scitamineum is a fungal smut pathogen epidemic in sugarcane producing areas. Early detection and proper identification of the smut are an essential requirement in its management practice. In this study, we developed a TaqMan real-time PCR assay using specific primers (bEQ-F/bEQ-R and a TaqMan probe (bEQ-P which were designed based on the bE (b East mating type gene (Genbank Accession no. U61290.1. This method was more sensitive (a detection limit of 10 ag pbE DNA and 0.8 ng sugarcane genomic DNA than that of conventional PCR (10 fg and 100 ng, resp.. Reliability was demonstrated through the positive detection of samples collected from artificially inoculated sugarcane plantlets (FN40. This assay was capable of detecting the smut pathogen at the initial stage (12 h of infection and suitable for inspection of sugarcane pathogen-free seed cane and seedlings. Furthermore, quantification of pathogen was verified in pathogen-challenged buds in different sugarcane genotypes, which suggested its feasibility for evaluation of smut resistance in different sugarcane genotypes. Taken together, this novel assay can be used as a diagnostic tool for sensitive, accurate, fast, and quantitative detection of the smut pathogen especially for asymptomatic seed cane or plants and evaluation of smut resistance of sugarcane genotypes.

  16. Soil bacterial community shifts associated with sugarcane straw removal

    Science.gov (United States)

    Pimentel, Laisa; Gumiere, Thiago; Andreote, Fernando; Cerri, Carlos

    2017-04-01

    In Brazil, the adoption of the mechanical unburned sugarcane harvest potentially increase the quantity of residue left in the field after harvesting. Economically, this material has a high potential for second generation ethanol (2G) production. However, crop residues have an essential role in diverse properties and processes in the soil. The greater part of the uncertainties about straw removal for 2G ethanol production is based on its effects in soil microbial community. In this sense, it is important to identify the main impacts of sugarcane straw removal on soil microbial community. Therefore, we conducted a field study, during one year, in Valparaíso (São Paulo state - Brazil) to evaluate the effects of straw decomposition on soil bacterial community. Specifically, we wanted: i) to compare the rates of straw removal and ii) to evaluate the effects of straw decomposition on soil bacterial groups over one year. The experiment was in a randomized block design with treatments arranged in strip plot. The treatments are different rates of sugarcane straw removal, namely: no removal, 50, 75 and 100% of straw removal. Soil sampling was carried out at 0, 4, 8 and 12 months after the sugarcane harvest (August 2015). Total DNA was extracted from soil using the PowersoilTM DNA Isolation kit. And the abundance of bacterial in each soil sample was estimated via quantification of 16S rRNA gene. The composition of the bacterial communities was estimated via terminal restriction fragment length polymorphism (T-RFLP) analysis, and the T-RF sizes were performed on a 3500 Genetic Analyzer. Finally, the results were examined with GeneMapper 4.1 software. There was bacterial community shifts through the time and among the rates of sugarcane straw removal. Bacterial community was firstly determined by the time scale, which explained 29.16% of total variation. Rates of straw removal explained 11.55% of shifts on bacterial community. Distribution through the time is an important

  17. Sustainability assessment of sugarcane biorefinery and molasses ethanol production in Thailand using eco-efficiency indicator

    International Nuclear Information System (INIS)

    Silalertruksa, Thapat; Gheewala, Shabbir H.; Pongpat, Patcharaporn

    2015-01-01

    Highlights: • Sugarcane biorefinery in Thailand is evaluated using the eco-efficiency concept. • Green cane along with cane trash use for electricity yields highest eco-efficiency. • Proposed biorefinery system increases eco-efficiency by 20–70%. - Abstract: The study aims to evaluate the sugarcane biorefinery and molasses ethanol production in Thailand using the combined environmental and economic sustainability indicator, so called “Eco-efficiency”. Four sugarcane biorefinery scenarios in Thailand are evaluated. The total output values (US$) and the life cycle greenhouse gas (GHG) emissions (kg CO_2eq) are selected as the indicators for characterizing economic and environmental performance, respectively. The results show that the biorefinery system of mechanized farming along with cane trash utilization for power generation yields the highest eco-efficiency. The benefits come from the increased value added of the biorefinery together with the decreased GHG emissions of the biorefinery system. As compared to the base case scenario, the new systems proposed result in the eco-efficiency improvement by around 20–70%. The biorefinery concept induces reduction of GHG emissions attributed to molasses ethanol. Green cane production and harvesting results in further lowering of the GHG emissions. Integration of sugarcane biomass utilization across the entire sugarcane complex would enhance the sustainability of the sugarcane production system.

  18. Sugarcane straw and the populations of pests and nematodes

    Directory of Open Access Journals (Sweden)

    Leila Luci Dinardo-Miranda

    2013-10-01

    Full Text Available The green cane harvesting represented a significant change in sugarcane ecosystem due to the presence of straw left on the soil and to the absence of fire. These two factors may affect the populations of pests and their natural enemies. Among the pests benefit from the green cane harvesting stand out the spittlebug, Mahanarva fimbriolata, the curculionid Sphenophorus levis and sugarcane borer, Diatraea saccharalis. In areas of green cane harvesting, the population of these species grew faster than in areas of burnt cane. On the other hand, there are virtually no records of attacks by lesser cornstalk borers in areas of green cane harvesting. Populations of plant parasitic nematodes and the beetles Migdolus fryanus, very important pests of sugarcane, were apparently not affected by the green cane harvesting. Despite the absence of more consistent information, it appears that populations of ants and the giant borer Telchin licus can increase in green cane areas, due primarily to the difficulty of pest control. The partial or total removal of straw from the field represents an additional change to the ecosystem that could alter the status of pests and nematodes. It is likely that spittlebug, the curculionid S. levis and sugarcane borer populations decrease if a portion of the straw is removed from the field. However, the pest populations in areas where the straw is collected will not return to their original conditions at the time of burnt cane harvesting because the absence of fire will be maintained.

  19. Sugarcane leaf area estimate obtained from the corrected Normalized Difference Vegetation Index (NDVI

    Directory of Open Access Journals (Sweden)

    Rodrigo Moura Pereira

    2016-06-01

    Full Text Available Large farmland areas and the knowledge on the interaction between solar radiation and vegetation canopies have increased the use of data from orbital remote sensors in sugarcane monitoring. However, the constituents of the atmosphere affect the reflectance values obtained by imaging sensors. This study aimed at improving a sugarcane Leaf Area Index (LAI estimation model, concerning the Normalized Difference Vegetation Index (NDVI subjected to atmospheric correction. The model generated by the NDVI with atmospheric correction showed the best results (R2 = 0.84; d = 0.95; MAE = 0.44; RMSE = 0.55, in relation to the other models compared. LAI estimation with this model, during the sugarcane plant cycle, reached a maximum of 4.8 at the vegetative growth phase and 2.3 at the end of the maturation phase. Thus, the use of atmospheric correction to estimate the sugarcane LAI is recommended, since this procedure increases the correlations between the LAI estimated by image and by plant parameters.

  20. Multivariate genetic divergence among sugarcane clones by multivariate analysis associated with mixed models

    Directory of Open Access Journals (Sweden)

    Valéria Rosa Lopes

    2014-02-01

    Full Text Available This work had the aim to evaluate the genetic divergence in sugarcane clones using the methodology of graphic dispersion by principal components analysis associated to linear mixed models, indentifying the more divergent and productive genotypes with more precision, for a subsequent combination. 138 sugarcane clones of the RB97 series of the Sugarcane Breeding Program of the Universidade Federal do Parana, more two standard cultivars were evaluated in three environments, with two replications. The two first components explained 96% of the total variation, sufficiently for explaining the divergence found. The variable that contributed the most to de divergence was kilogram of brix per plot (BKP followed by brix, mass of 10 stalks and number of stalks per plot. The more divergent sugarcane clones were RB975008, RB975112, RB975019, RB975153 and RB975067 and the more productive clones were RB975269, RB977533, RB975102, RB975317 and RB975038.

  1. Selection of Suitable Endogenous Reference Genes for Relative Copy Number Detection in Sugarcane

    Directory of Open Access Journals (Sweden)

    Bantong Xue

    2014-05-01

    Full Text Available Transgene copy number has a great impact on the expression level and stability of exogenous gene in transgenic plants. Proper selection of endogenous reference genes is necessary for detection of genetic components in genetically modification (GM crops by quantitative real-time PCR (qPCR or by qualitative PCR approach, especially in sugarcane with polyploid and aneuploid genomic structure. qPCR technique has been widely accepted as an accurate, time-saving method on determination of copy numbers in transgenic plants and on detection of genetically modified plants to meet the regulatory and legislative requirement. In this study, to find a suitable endogenous reference gene and its real-time PCR assay for sugarcane (Saccharum spp. hybrids DNA content quantification, we evaluated a set of potential “single copy” genes including P4H, APRT, ENOL, CYC, TST and PRR, through qualitative PCR and absolute quantitative PCR. Based on copy number comparisons among different sugarcane genotypes, including five S. officinarum, one S. spontaneum and two S. spp. hybrids, these endogenous genes fell into three groups: ENOL-3—high copy number group, TST-1 and PRR-1—medium copy number group, P4H-1, APRT-2 and CYC-2—low copy number group. Among these tested genes, P4H, APRT and CYC were the most stable, while ENOL and TST were the least stable across different sugarcane genotypes. Therefore, three primer pairs of P4H-3, APRT-2 and CYC-2 were then selected as the suitable reference gene primer pairs for sugarcane. The test of multi-target reference genes revealed that the APRT gene was a specific amplicon, suggesting this gene is the most suitable to be used as an endogenous reference target for sugarcane DNA content quantification. These results should be helpful for establishing accurate and reliable qualitative and quantitative PCR analysis of GM sugarcane.

  2. Loss of soil (macro)fauna due to the expansion of Brazilian sugarcane acreage.

    Science.gov (United States)

    Franco, André L C; Bartz, Marie L C; Cherubin, Maurício R; Baretta, Dilmar; Cerri, Carlos E P; Feigl, Brigitte J; Wall, Diana H; Davies, Christian A; Cerri, Carlos C

    2016-09-01

    Land use changes (LUC) from pasture to sugarcane (Saccharum spp.) crop are expected to add 6.4Mha of new sugarcane land by 2021 in the Brazilian Cerrado and Atlantic Forest biomes. We assessed the effects of these LUC on the abundance and community structure of animals that inhabit soils belowground through a field survey using chronosequences of land uses comprising native vegetation, pasture, and sugarcane along a 1000-km-long transect across these two major tropical biomes in Brazil. Macrofauna community composition differed among land uses. While most groups were associated with samples taken in native vegetation, high abundance of termites and earthworms appeared associated with pasture soils. Linear mixed effects analysis showed that LUC affected total abundance (X(2)(1)=6.79, p=0.03) and taxa richness (X(2)(1)=6.08, p=0.04) of soil macrofauna. Abundance increased from 411±70individualsm(-2) in native vegetation to 1111±202individualsm(-2) in pasture, but decreased sharply to 106±24individualsm(-2) in sugarcane soils. Diversity decreased 24% from native vegetation to pasture, and 39% from pasture to sugarcane. Thus, a reduction of ~90% in soil macrofauna abundance, besides a loss of ~40% in the diversity of macrofauna groups, can be expected when sugarcane crops replace pasture in Brazilian tropical soils. In general, higher abundances of major macrofauna groups (ants, coleopterans, earthworms, and termites) were associated with higher acidity and low contents of macronutrients and organic matter in soil. This study draws attention for a significant biodiversity loss belowground due to tropical LUC in sugarcane expansion areas. Given that many groups of soil macrofauna are recognized as key mediators of ecosystem processes such as soil aggregation, nutrients cycling and soil carbon storage, our results warrant further efforts to understand the impacts of altering belowground biodiversity and composition on soil functioning and agriculture performance

  3. Efficacy of Alkali-treated Sugarcane Fiber for Improving Physicochemical and Textural Properties of Meat Emulsions with Different Fat Levels

    Science.gov (United States)

    Kim, Hyun-Wook; Setyabrata, Derico; Lee, Yong-Jae; Brad Kim, Yuan H.

    2018-01-01

    Abstract The objective of this study was to evaluate the efficacy of alkaline-treated sugarcane bagasse fiber on physicochemical and textural properties of meat emulsion with different fat levels. Crude sugarcane bagasse fiber (CSF) was treated with calcium hydroxide (Ca(OH2)) to obtain alkaline-treated sugarcane bagasse fiber (ASF). The two types of sugarcane bagasse fiber (CSF and ASF) were incorporated at 2% levels in pork meat emulsions prepared with 5%, 10% and 20% fat levels. Alkaline-treatment markedly increased acid detergent fiber content (p=0.002), but significantly decreased protein, fat, ash and other carbohydrate contents. ASF exhibited significantly higher water-binding capacity, but lower oil-binding and emulsifying capacities than CSF. Meat emulsions formulated with 10% fat and 2% sugarcane bagasse fiber had equivalent cooking loss and textural properties to control meat emulsion (20% fat without sugarcane bagasse fiber). The two types of sugarcane bagasse fiber had similar impacts on proximate composition, cooking yield and texture of meat emulsion at the same fat level, respectively (p>0.05). Our results confirm that sugarcane bagasse fiber could be a functional food ingredient for improving physicochemical and textural properties of meat emulsion, at 2% addition level. Further, the altered functional properties of alkaline-treated sugarcane bagasse fiber had no impacts on physicochemical and textural properties of meat emulsions, regardless of fat level at 5%, 10% and 20%. PMID:29805281

  4. Residual recovery and yield performance of nitrogen fertilizer applied at sugarcane planting

    Directory of Open Access Journals (Sweden)

    Henrique Coutinho Junqueira Franco

    2015-12-01

    Full Text Available ABSTRACTThe low effectiveness of nitrogen fertilizer (N is a substantial concern that threatens global sugarcane production. The aim of the research reported in this paper was to assess the residual effect of N-fertilizer applied at sugarcane planting over four crop seasons in relation to sugarcane crop yield. Toward this end three field experiments were established in the state of São Paulo, Brazil, during February of 2005 and July of 2009, in a randomized block design with four treatments: 0, 40, 80 and 120 kg ha−1 of N applied as urea during sugarcane planting. Within each plot, a microplot was established to which 15N-labeled urea was applied. The application of N at planting increased plant cane yield in two of the three sites and sucrose content at the other, whereas the only residual effect was higher sucrose content in one of the following ratoons. The combined effect was an increase in sugar yield for three of the 11 crop seasons evaluated. Over the crop cycle of a plant cane and three ratoon crops, only 35 % of the applied N was recovered, split 75, 13, 7 and 5 % in the plant cane, first, second and third ratoons, respectively. These findings document the low efficiency of N recovery by sugarcane, which increases the risk that excessive N fertilization will reduce profitability and have an adverse effect on the environment.

  5. Physical chemical evaluation of sugarcane spirit with Anatto subjected to gamma irradiation for aging

    International Nuclear Information System (INIS)

    Perina, Vanessa C.S.; Arthur, Valter; Silva, Lucia A.C.S.; Harder, Marcia N.C.; Pires, Juliana A.; Scanholato, Mariana; Santos, Mariana R.; Bortoleto, Gisele G.

    2011-01-01

    The sugarcane spirit beverage has economic and cultural importance in Brazil, and is produced by distilling the fermented sugarcane juice. The aging process, generally done in oak barrels, consists of chemical reactions which occur slowly and continuously, leading to richer and more complex flavours. Annatto, a native fruit from tropical America is used in the production of natural dyes, in the replacement for artificial colorants, especially by the food industry. Also, the beverage industry uses it to make products resembling the natural aged ones. Nowadays, modern methods use irradiation to accelerate the aging process. There are many reasons to use it in sugarcane spirit production: sterilizing the wort, changing sensory characteristics of sugarcane liquor and aging speedup. For this study, samples of sugarcane spirit were obtained at FATEC Piracicaba and annatto was added at a ratio of 3%, when using annatto seeds, and 0.25%, when using annatto extract. The samples, except the controls, were directly irradiated in polyethylene containers with doses of 200 Gy and 300 Gy at a rate of 0.406 Gy/h. The evaluation parameters were soluble solids, pH, acidity and ashes content. For statistical purposes, the Tukey test was used with a 5% significance level. From the obtained results, the gamma radiation ages the sugarcane spirit and parameters as soluble solids and acidity can be used for aging determination. Annatto addition is allowed in the process. (author)

  6. Land Suitability Assessment for Sugarcane in "Herois de Caxito" (Angola

    Directory of Open Access Journals (Sweden)

    Baert, G.

    2005-01-01

    Full Text Available The suitability of the soils surrounding the sugarcane plantation at "Herois de Caxito" (7068 ha is assessed. The main goal is to identify land suitability for the enlargement of the present plantation, using FAO land evaluation models (modified to suit Herois de Caxito conditions and GIS. Calculations of the radiationthermal production potential (RPP, land production potential (LPP, irrigation suitability index, and evaluation of the irrigation water quality are done. The water-limited production potential (WPP is found equal to the RPP, because water needs were fully met under irrigation. Maps showing the spatial distribution of the LPP and the suitability for irrigation are generated. The matching of irrigation and fertility indices has shown that, about 40% of the soils with good fertility for sugarcane production present low suitability for irrigation, the main limitations being the very fine texture and the drainage. The available surface water at Herois de Caxito (Dande river is of very good quality for irrigation of sugarcane.

  7. Preparation and characterization of super absorbent polymer from sugarcane bagasse

    International Nuclear Information System (INIS)

    Wiwien Andriyanti; Suyanti; Ngasifudin

    2012-01-01

    Sugarcane bagasse is a source of biomass which large enough numbers and has not been fully exploited. At this time has developed a super absorbent polymer material of sugarcane bagasse that can absorb water up to several times of its own weight and keep this water. Super absorbent polymers can be used as a soil conditioner that can be used as an absorber and storage of ground water, the giver of nutrients for plants, and can improve soil properties. The purpose of this study is to make and characterization of super absorbent polymer (PCS) from sugarcane bagasse. Preparation of super absorbent polymers (PCS) has been done by grafting method using ionizing radiation from Electron Beam Engineering (MBE) 350 mA keV/10. Irradiation process carried out with a dose variation of 20, 35, and 50 kGy. Increasing doses of radiation will increase the percentage fraction of transplantation (grafting) and the fraction of water absorption ability (swelling ratio). (author)

  8. Nutritional parameters of steers receiving different levels of sunflower crushed in partial replacement of soybean meal.

    Science.gov (United States)

    Lima, Hellen L; Goes, Rafael H T B de; Cerilo, Sara L N; Oliveira, Euclides R de; Gressler, Maria G M; Brabes, Kelly C S

    2013-01-01

    To evaluate of the sunflower crushed in nutritional parameters in steers, supplemented at pasture, we used four steers in 4×4 Latin square design. The supplements were provided in 6 g/kg of body weight/animal/day, consisting of sunflower crushed, corn, soybean meal and mineral. All the supplements was isonitrogenous and soybean meal was replaced in 0, 20, 40, and 60% for sunflower crushed. The determination of ruminal pH and ammonia was at 0, 2, 4, 6 and 8 h. after feeding and for short-chain fatty acids it was collected at 0 and 6 h. post-feeding. The dry matter intake was not affected (P>0.05) by inclusion of sunflower crushed (mean=6.59 kg/day). There was no significant effect (P>0.05) for pH for the inclusion of sunflower crushed (mean=6.41). For contents of ruminal NH₃-N was a significant effect (P replacement of soybean meal did not alter nutrition parameters.

  9. The sugarcane signal transduction (SUCAST catalogue: prospecting signal transduction in sugarcane

    Directory of Open Access Journals (Sweden)

    Glaucia Mendes Souza

    2001-12-01

    Full Text Available EST sequencing has enabled the discovery of many new genes in a vast array of organisms, and the utility of this approach to the scientific community is greatly increased by the establishment of fully annotated databases. The present study aimed to identify sugarcane ESTs sequenced in the sugarcane expressed sequence tag (SUCEST project (http://sucest.lad.ic.unicamp.br that corresponded to signal transduction components. We also produced a sugarcane signal transduction (SUCAST catalogue (http://sucest.lad.ic.unicamp.br/private/mining-reports/QG/QG-mining.htm that covered the main categories and pathways. Expressed sequence tags (ESTs encoding enzymes for hormone (gibberellins, ethylene, auxins, abscisic acid and jasmonic acid biosynthetic pathways were found and tissue specificity was inferred from their relative frequency of occurrence in the different libraries. Whenever possible, transducers of hormones and plant peptide signaling were catalogued to the respective pathway. Over 100 receptors were found in sugarcane, which contains a large family of Ser/Thr kinase receptors and also photoreceptors, histidine kinase receptors and their response regulators. G-protein and small GTPases were analyzed and compared to known members of these families found in mammalian and plant systems. Major kinase and phosphatase pathways were mapped, with special attention being given to the MAP kinase and the inositol pathway, both of which are well known in plants.O sequenciamento de ESTs (etiquetas de sequencias transcritas tem possibilitado a descoberta de muitos novos genes em uma ampla variedade de organismos. Um aumento do aproveitamento desta informação pela comunidade científica tem sido possível graças ao desenvolvimento de base de dados contendo seqüências completamente anotadas. O trabalho aqui relatado teve como objetivo a identificação de ESTs de cana de açúcar seqüenciadas através do projeto SUCEST (http://sucest.lad.ic. unicamp.br que

  10. Assessment of three cuban sites for testing resistance to sugarcane mosaic virus

    Directory of Open Access Journals (Sweden)

    Yaquelin Puchades

    2015-03-01

    Full Text Available Sugarcane mosaic disease is amongst the world’s most important diseases affecting sugarcane worldwide. The objective was to assess the environmental conditions of the sites where the test for SCMV resistance is done. Multi-environment trial Data were analyzed using a Principal Components Analysis Eighteen sugarcane genotypes s were evaluated from the main testing sites in Cuba (Jovellanos, Florida, Mayarí . The information of the climatic conditions was recorded at local weather stations. The assessment of the sites was done by analyzing the main components. Results showed that the testing sites were different from one another, and proved that the environment strongly influences on the mosaic symptom manifestation. PCA was an excellent procedure to assess the testing sites .for SCMV resistance.

  11. Ametryn Leaching in Soils from the Sugarcane Region in Northeastern Brazilian

    OpenAIRE

    SILVA, K.S.; FREITAS, F.C.L.; BRAGA, D.F.; DOMBROSKI, J.L.D.; SANTOS, A.F.B.

    2016-01-01

    ABSTRACT Ametryn is one of the most widely used herbicides in the sugarcane culture. Little is known about the interactions between this herbicide and the attributes of soils in the sugarcane region of northeastern Brazil. This knowledge, before recommending herbicide, will minimize the negative effects on the environment, particularly on water resources, and will ensure weed control efficacy. In this work, ametryn leaching potential was estimated through bioassays and chromatography, in five...

  12. Sandvik sharpens in-pit crushing focus

    Energy Technology Data Exchange (ETDEWEB)

    Casteel, K.

    2009-04-15

    Major mining equipment supplier Sandvik Mining and Construction has announced a full-fledged fully mobile crushing plant, the PF300. This is shaping up to be the decade's major addition to the large scale open-cut mining toolkit. The PF300 can be connected to a face conveyor by a loading bridge as well as by belt wagon or transfer conveyor. The article describes design features. 2 figs.

  13. AN APPROACH TO FINANCIAL RISK IN A PORTFOLIO FOR PLANNING THE INDUSTRIAL PRODUCTION OF PRODUCTS DERIVED FROM SUGARCANE

    Directory of Open Access Journals (Sweden)

    Thárcylla R.N. Clemente

    2015-12-01

    Full Text Available ABSTRACT Brazil's location and tropical weather conditions are favourable cultivating sugarcane, which has led to Brazil being one of the world's largest producers of sugarcane. The influence of the sugarcane industry on its economy stands out among the indicators of Brazilian economic growth and because the diversified investment when planning the production of products derived from this sector is encouraged. The decision on which derivative (for example, crystal sugar, anhydrous ethanol, or hydrous ethanol to produce from raw sugarcane can be modelled as an investment decision in a portfolio decision problem whenever a combination of these products is considered. As to the future price of these commodities, raw sugarcane is considered to be capital that should be invested. Thus, this paper puts forward a decision model which uses concepts from Decision Analysis and Bayesian Risk Analysis that may well assist the process of managing assets in the Brazilian sugarcane industry by considering the financial aspect when compiling a portfolio for planning production.

  14. Sugarcane yield estimation for climatic conditions in the state of Goiás

    Directory of Open Access Journals (Sweden)

    Jordana Moura Caetano

    Full Text Available ABSTRACT Models that estimate potential and depleted crop yield according to climatic variable enable the crop planning and production quantification for a specific region. Therefore, the objective of this study was to compare methods to sugarcane yield estimates grown in the climatic condition in the central part of Goiás, Brazil. So, Agroecological Zone Method (ZAE and the model proposed by Scarpari (S were correlated with real data of sugarcane yield from an experimental area, located in Santo Antônio de Goiás, state of Goiás, Brazil. Data yield refer to the crops of 2008/2009 (sugarcane plant, 2009/2010, 2010/2011 and 2011/2012 (ratoon sugarcane. Yield rates were calculated as a function of atmospheric water demand and water deficit in the area under study. Real and estimated yields were adjusted in function of productivity loss due to cutting stage of sugarcane, using an average reduction in productivity observed in the experimental area and the average reduction in the state of Goiás. The results indicated that the ZAE method, considering the water deficit, displayed good yield estimates for cane-plant (d > 0.90. Water deficit decreased the yield rates (r = -0.8636; α = 0.05 while the thermal sum increased that rate for all evaluated harvests (r > 0.68; α = 0.05.

  15. Carbon Footprint of Biofuel Sugarcane Produced in Mineral and Organic Soils in Florida

    Energy Technology Data Exchange (ETDEWEB)

    Izursa, Jose-Luis; Hanlon, Edward; Amponsah, Nana; Capece, John

    2013-02-06

    Ethanol produced from sugarcane is an existing and accessible form of renewable energy. In this study, we applied the Life Cycle Assessment (LCA) approach to estimate the Carbon Footprint (CFP) of biofuel sugarcane produced on mineral (sandy) and organic (muck) soils in Florida. CFP was estimated from greenhouse gas (GHG) emissions (CO2, CH4, and N2O) during the biofuel sugarcane cultivation. The data for the energy (fossil fuels and electricity), equipment, and chemical fertilizers were taken from enterprise budgets prepared by the University of Florida based on surveys and interviews obtained from local growers during the cropping years 2007/2008 and 2009/2010 for mineral soils and 2008/2009 for organic soils. Emissions from biomass burning and organic land use were calculated based on the IPCC guidelines. The results show that the CFP for biofuel sugarcane production is 0.04 kg CO2e kg-1y-1 when produced in mineral soils and 0.46 kg CO2e kg-1y-1 when produced in organic soils. Most of the GHG emissions from production of biofuel sugarcane in mineral soils come from equipment (33%), fertilizers (28%), and biomass burning (27%); whereas GHG emissions from production in organic soils come predominantly from the soil (93%). This difference should be considered to adopt new practices for a more sustainable farming system if biofuel feedstocks are to be considered.

  16. Simulation and modeling of the crushing behavior of structural members

    International Nuclear Information System (INIS)

    Toi, Yutaka

    1986-01-01

    The analysis of the crushing behavior (the behavior of compressive breakdown accompanied by super large deformation) of structural members is an important subject which becomes the base of the ultimate strength design of the structures which may cause collision accident such as automobiles, ships and aircrafts, and of those which are feared to be collided such as offshore structures, bridge piers and nuclear power plants. However, since it is a phenomenon of very strong nonlinearity, its analysis is accompanied by large difficulty. In this report, three kinds of the approach for this problem, that is, rigid-plastic theoretical analysis, the simulation using a rigid body and spring model and nonlinear finite element analysis, are explained, referring to the example of calculation by the authors on the non-axisymmetric crushing problem of cylindrical shells. In crushing problem, the matters of concern are the amount of collision energy which can be absorbed by the plastic deformation of structures and the amount of deformation. It can be said that the increase of calculation cost brings about the heightening of calculation accuracy. The nonlinear finite element analysis is promising because its calculation cost is expected to lower in future. (Kako, I.)

  17. Brazilian sugarcane ethanol as an expandable green alternative to crude oil use

    Science.gov (United States)

    Jaiswal, Deepak; de Souza, Amanda P.; Larsen, Søren; Lebauer, David S.; Miguez, Fernando E.; Sparovek, Gerd; Bollero, Germán; Buckeridge, Marcos S.; Long, Stephen P.

    2017-11-01

    Reduction of CO2 emissions will require a transition from fossil fuels to alternative energy sources. Expansion of Brazilian sugarcane ethanol provides one near-term scalable solution to reduce CO2 emissions from the global transport sector. In contrast to corn ethanol, the Brazilian sugarcane ethanol system may offset 86% of CO2 emissions compared to oil use, and emissions resulting from land-use change to sugarcane are paid back in just 2-8 years. But, it has been uncertain how much further expansion is possible given increasing demand for food and animal feed, climate change impacts and protection of natural ecosystems. We show that Brazilian sugarcane ethanol can provide the equivalent of 3.63-12.77 Mb d-1 of crude oil by 2045 under projected climate change while protecting forests under conservation and accounting for future land demand for food and animal feed production. The corresponding range of CO2 offsets is 0.55-2.0 Gigatons yr-1. This would displace 3.8-13.7% of crude oil consumption and 1.5-5.6% of net CO2 emission globally relative to data for 2014.

  18. Pyraclostrobin wash-off from sugarcane leaves and aerobic dissipation in agricultural soil.

    Science.gov (United States)

    Fulcher, James M; Wayment, Darcey G; White, Paul M; Webber, Charles L

    2014-03-12

    To mitigate damage from the fungal sugarcane pathogen brown rust (Puccinia melanocephala), a Section 18 Emergency Use Label was put in place by the United States Environmental Protection Agency (U.S. EPA) for the application of pyraclostrobin (trade name Headline SC, produced by BASF, Research Triangle Park, NC) on sugarcane in 2008. To assess the dynamics of this fungicide in Louisiana soil, samples (n = 24) from a non-treated field were spiked with pyraclostrobin (3.1 μg g(-1)) and analyzed in laboratory conditions over the course of 63 days using quick, easy, cheap, effective, rugged, and safe (QuEChERS) dispersive solid-phase extraction/high-performance liquid chromatography with ultraviolet-visible detection (dSPE/HPLC-UV). Modeling was performed using Microsoft Excel to predict DTx values. Pyraclostrobin was found to follow biphasic kinetics with DT50 and DT90 values of 60 and 282 days, suggesting that it is moderately persistent to persistent in soils. Wash-off studies on sugarcane indicate that very little fungicide is in the wash-off after 48 h. If applied to sugarcane according to label recommendations, the fungicide should have minimal dissipation from rainfall events.

  19. Sand transportation and reverse patterns over leeward face of sand dune

    Science.gov (United States)

    Jiang, Hong; Dun, Hongchao; Tong, Ding; Huang, Ning

    2017-04-01

    Sand saltation has complex interactions with turbulent flow and dune form. Most models of wind-blown sand consider ideal circumstances such as steady wind velocity and a flat surface, and the bulk of data on wind flow and sand transport over an individual dune has focused mostly on the influence of dune shape or inter-dune space on the wind flow, neglecting the effect of morphology on sand saltation, particularly airflow and sand transportation over the leeward slope. Wind flow structures over the leeward slope of sand dunes have a fundamental influence on the organization of sand dunes. In order to understand sand dune dynamics, lee face airflow and sediment transportation should be paid more attention. Previous field observations could not measure turbulent flow structure well because of the limited observation points and the influence of experiment structure on wind field. In addition, the reverse sand particles over leeward face could not be collected by sand trap in field. Numerous field observations could not measure turbulent flow structure because of the limited observation points and the influence of experimental structures on the wind field. In addition, the reverse transport of sand particles over leeward face could not be collected by sand traps in field. Therefore, this paper aims to investigate the turbulent flow structure and sand transport pattern over the leeward slope. A numerical model of sand saltation over slope terrain is constructed, which also considers the coupling effects between air flow and sand particles. The large eddy simulation method is used to model turbulent flow. Sand transport is simulated by tracking the trajectory of each sand particle. The results show that terrain significantly alters the turbulent air flow structure and wind-blown sand movement, especially over the leeward slope. Here, mass flux increases initially and then decreases with height in the reversed flow region in the direction of wind flow, and the mass flux

  20. A LCA (life cycle assessment) of the methanol production from sugarcane bagasse

    International Nuclear Information System (INIS)

    Reno, Maria Luiza Grillo; Lora, Electo Eduardo Silva; Palacio, Jose Carlos Escobar; Venturini, Osvaldo Jose; Buchgeister, Jens; Almazan, Oscar

    2011-01-01

    Nowadays one of the most important environmental issues is the exponential increase of the greenhouse effect by the polluting action of the industrial and transport sectors. The production of biofuels is considered a viable alternative for the pollution mitigation but also to promote rural development. The work presents an analysis of the environmental impacts of the methanol production from sugarcane bagasse, taking into consideration the balance of the energy life cycle and its net environmental impacts, both are included in a LCA (Life Cycle Assessment) approach. The evaluation is done as a case study of a 100,000 t/y methanol plant, using sugarcane bagasse as raw material. The methanol is produced through the BTL (Biomass to Liquid) route. The results of the environmental impacts were compared to others LCA studies of biofuel and it was showed that there are significant differences of environmental performance among the existing biofuel production system, even for the same feedstock. The differences are dependent on many factors such as farming practices, technology of the biomass conversion. With relation to the result of output/input ratio, the methanol production from sugarcane bagasse showed to be a feasible alternative for the substitution of an amount of fossil methanol obtained from natural gas. -- Highlights: → High and favorable energy ratio value of methanol from bagasse. → Sugarcane production has a low participation on environmental impacts. → The gasification and methanol synthesis can be combined in a biorefinery. → Farming biomass could cause the environmental impact land competition. → The trash of sugarcane can be used successfully in methanol production.

  1. Effects of crushed conspecifics on growth and survival of Penaeus monodon Fabricius post larvae

    NARCIS (Netherlands)

    Nga, B.T.; Lürling, M.F.L.L.W.; Peeters, E.T.H.M.; Roijackers, R.M.M.; Scheffer, M.; Nghia, T.T.

    2006-01-01

    In the present study, the hypothesis tested was that Penaeus monodon post-larvae (PL) experience lower growth when exposed to crushed conspecifics, which was achieved by exposing individual P. monodon PL with abundant food for 4 weeks to a gradient from 0 to 100 crushed conspecific PL L1. Both dry

  2. Prioritizing Crop Management to Increase Nitrogen Use Efficiency in Australian Sugarcane Crops.

    Science.gov (United States)

    Thorburn, Peter J; Biggs, Jody S; Palmer, Jeda; Meier, Elizabeth A; Verburg, Kirsten; Skocaj, Danielle M

    2017-01-01

    Sugarcane production relies on the application of large amounts of nitrogen (N) fertilizer. However, application of N in excess of crop needs can lead to loss of N to the environment, which can negatively impact ecosystems. This is of particular concern in Australia where the majority of sugarcane is grown within catchments that drain directly into the World Heritage listed Great Barrier Reef Marine Park. Multiple factors that impact crop yield and N inputs of sugarcane production systems can affect N use efficiency (NUE), yet the efficacy many of these factors have not been examined in detail. We undertook an extensive simulation analysis of NUE in Australian sugarcane production systems to investigate (1) the impacts of climate on factors determining NUE, (2) the range and drivers of NUE, and (3) regional variation in sugarcane N requirements. We found that the interactions between climate, soils, and management produced a wide range of simulated NUE, ranging from ∼0.3 Mg cane (kg N) -1 , where yields were low (i.e., 5 Mg cane (kg N) -1 in plant crops where yields were high and N inputs low. Of the management practices simulated (N fertilizer rate, timing, and splitting; fallow management; tillage intensity; and in-field traffic management), the only practice that significantly influenced NUE in ratoon crops was N fertilizer application rate. N rate also influenced NUE in plant crops together with the management of the preceding fallow. In addition, there is regional variation in N fertilizer requirement that could make N fertilizer recommendations more specific. While our results show that complex interrelationships exist between climate, crop growth, N fertilizer rates and N losses to the environment, they highlight the priority that should be placed on optimizing N application rate and fallow management to improve NUE in Australian sugarcane production systems. New initiatives in seasonal climate forecasting, decisions support systems and enhanced efficiency

  3. Prioritizing Crop Management to Increase Nitrogen Use Efficiency in Australian Sugarcane Crops

    Directory of Open Access Journals (Sweden)

    Peter J. Thorburn

    2017-09-01

    Full Text Available Sugarcane production relies on the application of large amounts of nitrogen (N fertilizer. However, application of N in excess of crop needs can lead to loss of N to the environment, which can negatively impact ecosystems. This is of particular concern in Australia where the majority of sugarcane is grown within catchments that drain directly into the World Heritage listed Great Barrier Reef Marine Park. Multiple factors that impact crop yield and N inputs of sugarcane production systems can affect N use efficiency (NUE, yet the efficacy many of these factors have not been examined in detail. We undertook an extensive simulation analysis of NUE in Australian sugarcane production systems to investigate (1 the impacts of climate on factors determining NUE, (2 the range and drivers of NUE, and (3 regional variation in sugarcane N requirements. We found that the interactions between climate, soils, and management produced a wide range of simulated NUE, ranging from ∼0.3 Mg cane (kg N-1, where yields were low (i.e., <50 Mg ha-1 and N inputs were high, to >5 Mg cane (kg N-1 in plant crops where yields were high and N inputs low. Of the management practices simulated (N fertilizer rate, timing, and splitting; fallow management; tillage intensity; and in-field traffic management, the only practice that significantly influenced NUE in ratoon crops was N fertilizer application rate. N rate also influenced NUE in plant crops together with the management of the preceding fallow. In addition, there is regional variation in N fertilizer requirement that could make N fertilizer recommendations more specific. While our results show that complex interrelationships exist between climate, crop growth, N fertilizer rates and N losses to the environment, they highlight the priority that should be placed on optimizing N application rate and fallow management to improve NUE in Australian sugarcane production systems. New initiatives in seasonal climate forecasting

  4. Burnt sugarcane harvesting - cardiovascular effects on a group of healthy workers, Brazil.

    Directory of Open Access Journals (Sweden)

    Cristiane Maria Galvão Barbosa

    Full Text Available Brazil is the world's largest producer of sugarcane. Harvest is predominantly manual, exposing workers to health risks: intense physical exertion, heat, pollutants from sugarcane burning.Panel study to evaluate the effects of burnt sugarcane harvesting on blood markers and on cardiovascular system.Twenty-eight healthy male workers, living in the countryside of Brazil were submitted to blood markers, blood pressure, heart rate variability, cardiopulmonary exercise testing, sympathetic nerve activity evaluation and forearm blood flow measures (venous occlusion plethysmography during burnt sugarcane harvesting and four months later while they performed other activities in sugar cane culture.Mean participant age was 31 ± 6.3 years, and had worked for 9.8 ± 8.4 years on sugarcane work. Work during the harvest period was associated with higher serum levels of Creatine Kinase - 136.5 U/L (IQR: 108.5-216.0 vs. 104.5 U/L (IQR: 77.5-170.5, (p = 0.001; plasma Malondialdehyde-7.5 ± 1.4 µM/dl vs. 6.9 ± 1.0 µM/dl, (p = 0.058; Glutathione Peroxidase - 55.1 ± 11.8 Ug/Hb vs. 39.5 ± 9.5 Ug/Hb, (p<0.001; Glutathione Transferase- 3.4±1.3 Ug/Hb vs. 3.0 ± 1.3 Ug/Hb, (p = 0.001; and 24-hour systolic blood pressure - 120.1 ± 10.3 mmHg vs. 117.0 ± 10.0 mmHg, (p = 0.034. In cardiopulmonary exercise testing, rest-to-peak diastolic blood pressure increased by 11.12 mmHg and 5.13 mmHg in the harvest and non-harvest period, respectively. A 10 miliseconds reduction in rMSSD and a 10 burst/min increase in sympathetic nerve activity were associated to 2.2 and 1.8 mmHg rises in systolic arterial pressure, respectively.Work in burnt sugarcane harvesting was associated with changes in blood markers and higher blood pressure, which may be related to autonomic imbalance.

  5. A METHOD FOR EXERGY ANALYSIS OF SUGARCANE BAGASSE BOILERS

    Directory of Open Access Journals (Sweden)

    CORTEZ L.A.B.

    1998-01-01

    Full Text Available This work presents a method to conduct a thermodynamic analysis of sugarcane bagasse boilers. The method is based on the standard and actual reactions which allows the calculation of the enthalpies of each process subequation and the exergies of each of the main flowrates participating in the combustion. The method is presented using an example with real data from a sugarcane bagasse boiler. A summary of the results obtained is also presented together based on the 1st Law of Thermodynamics analysis, the exergetic efficiencies, and the irreversibility rates. The method presented is very rigorous with respect to data consistency, particularly for the flue gas composition.

  6. Road dust from pavement wear and traction sanding

    Energy Technology Data Exchange (ETDEWEB)

    Kupiainen, K.

    2007-07-01

    sanding and physical properties of the traction sand aggregate affect formation of road dust (ii) How do studded tires affect the formation of road dust when compared with friction tires (iii) What are the composition and sources of airborne road dust in a road simulator and during a springtime road dust episode in Finland (iv) What is the size distribution of abrasion particles from tire-road interaction. The studies were conducted both in a road simulator and in field conditions. The test results from the road simulator showed that traction sanding increased road dust emissions, and that the effect became more dominant with increasing sand load. A high percentage of fine-grained anti-skid aggregate of overall grading increased the PM10 concentrations. Anti-skid aggregate with poor resistance to fragmentation resulted in higher PM levels compared with the other aggregates, and the effect became more significant with higher aggregate loads. Glaciofluvial aggregates tended to cause higher particle concentrations than crushed rocks with good fragmentation resistance. Comparison of tire types showed that studded tires result in higher formation of PM emissions compared with friction tires. The same trend between the tires was present in the tests with and without anti-skid aggregate. This finding applies to test conditions of the road simulator with negligible resuspension. Source and composition analysis showed that the particles in the road simulator were mainly minerals and originated from both traction sand and pavement aggregates. A clear contribution of particles from anti-skid aggregate to ambient PM and dust deposition was also observed in urban conditions. The road simulator results showed that the interaction between tires, anti-skid aggregate and road surface is important in dust production and the relative contributions of these sources depend on their properties. Traction sand grains are fragmented into smaller particles under the tires, but they also wear the

  7. Application of Crushed Concrete in Geotechnical Engineering - Selected Issues

    Science.gov (United States)

    Kawalec, Jacek; Kwiecien, Slawomir; Pilipenko, Anton; Rybak, Jarosław

    2017-12-01

    The reuse of building materials becomes an important issue in sustainable engineering. As the technical requirements for civil engineering structures changes with time and the life time is limited, the need of building new objects meets the necessity of recycling of the existing ones. In the case of steel structures, the possibility of recycling is obvious, also in the case of wooden constructions, the possibility of “burning” solves the problem. The concrete waste is generated mainly as a result of the demolition and reconstruction of residential and industrial buildings. These types of waste are basically made from crushed rocks and cement minerals and contain non-hydrated cement particles in its composition. Concrete poses a lot of problems mainly for two reasons. It is difficult to crush, heavy and hard to transport and demanding in reuse. Different fractions (particle sizes) may be used for different purposes. Starting from very fine particles which can be used in concrete production, through regular 16-300 mm fractions used to form new fills and fill the mats, up to very irregular mixtures used to form stone columns by means of Impulse Compaction or in Dynamic Replacement. The presented study juxtaposes authors experience with crushed concrete used in civil engineering, mainly in geotechnical projects. Authors’ experiences comprise the application of crushed concrete in the new concrete production in Russia, changing pulverized bridge into the fill of mesh sacks, or mattresses used as an effective way to protect the shoreline and the New Orleans East land bridge after Katrina storm (forming a new shoreline better able to withstand wave actions), and finally the use of very irregular concrete fractions to form stone columns in week soils on the example of railway and road projects in Poland. Selected case studies are presented and summarized with regard to social, technical and economic issues including energy consumption needed for proposed technologies

  8. Climate Variability and Sugarcane Yield in Louisiana.

    Science.gov (United States)

    Greenland, David

    2005-11-01

    This paper seeks to understand the role that climate variability has on annual yield of sugarcane in Louisiana. Unique features of sugarcane growth in Louisiana and nonclimatic, yield-influencing factors make this goal an interesting and challenging one. Several methods of seeking and establishing the relations between yield and climate variables are employed. First, yield climate relations were investigated at a single research station where crop variety and growing conditions could be held constant and yield relations could be established between a predominant older crop variety and a newer one. Interviews with crop experts and a literature survey were used to identify potential climatic factors that control yield. A statistical analysis was performed using statewide yield data from the American Sugar Cane League from 1963 to 2002 and a climate database. Yield values for later years were adjusted downward to form an adjusted yield dataset. The climate database was principally constructed from daily and monthly values of maximum and minimum temperature and daily and monthly total precipitation for six cooperative weather-reporting stations representative of the area of sugarcane production. The influence of 74 different, though not independent, climate-related variables on sugarcane yield was investigated. The fact that a climate signal exists is demonstrated by comparing mean values of the climate variables corresponding to the upper and lower third of adjusted yield values. Most of these mean-value differences show an intuitively plausible difference between the high- and low-yield years. The difference between means of the climate variables for years corresponding to the upper and lower third of annual yield values for 13 of the variables is statistically significant at or above the 90% level. A correlation matrix was used to identify the variables that had the largest influence on annual yield. Four variables [called here critical climatic variables (CCV

  9. Registration of 'CP 09-2392' Sugarcane

    Science.gov (United States)

    CP 09-2392’ (Reg. No.____; PI _____) sugarcane, a complex hybrid of Saccharum spp, was developed through cooperative research conducted by the USDA-ARS, the University of Florida, and the Florida Sugar Cane League, Inc., and was released to growers in June 2016. ‘CP 09-2392’ was selected from a cro...

  10. Policies, Socioeconomic, Institutional and Biophysical Factors Influencing the Change from Rice to Sugarcane in Nong Bua Lamphu Province, Thailand

    Science.gov (United States)

    Lakapunrat, Narinpat; Thapa, Gopal B.

    2017-06-01

    For the past decade, Thailand pursued a strategy of promoting biofuel crop production, including sugarcane, to meet the ever increasing energy demand and to increase the income of farmers. This study analyzed the influence of policy instruments implemented to promote the sugarcane cultivation, farm household socioeconomic levels, biophysical, and institutional factors driving the conversion of rice fields into sugarcane farms. Primary information was collected from 230 farm households through a structured questionnaire. Relevant policy documents published by the responsible government agencies were the main sources of secondary information collected for policy analysis. The analyses revealed that farmers in the study area converted 25-75% of their rice fields into sugarcane farms as a result of implementation of policy instruments that made sugarcane financially far more attractive than rice. The results of the regression analysis showed that eight variables were found significant and positively influenced the conversion of rice fields into sugarcane farms. These were access to extension services, information, sugarcane loading stations, and ground water for irrigation, and duration of experience in sugarcane farming as well as household head's age and education. Irrespective of landholding size, the majority of farmers were not concerned about food security. In view of the finding, if feasible, in the form of additional price supports and commercial cane sugar index-based pricing strategies to promote sugarcane production should benefit all concerned farmers. Likewise, attention should be paid to deliver essential extension and marketing services in an effective way, particularly to those farmers who are not receiving such services.

  11. Development and integration of an SSR-based molecular identity database into sugarcane breeding program

    Science.gov (United States)

    Sugarcane breeding is very difficult and it takes 12 to 14 years to develop a new cultivar for commercial production. This is because sugarcane varieties are highly polyploid, inter-specific hybrids with 100 to 130 chromosomes that may vary across geographical areas. Other obstacles/constraints incl...

  12. Early myelin breakdown following sural nerve crush: a freeze-fracture study

    Directory of Open Access Journals (Sweden)

    Martinez A.M.B.

    2000-01-01

    Full Text Available In this study we describe the early changes of the myelin sheath following surgical nerve crush. We used the freeze-fracture technique to better evaluate myelin alterations during an early stage of Wallerian degeneration. Rat sural nerves were experimentally crushed and animals were sacrificed by transcardiac perfusion 30 h after surgery. Segments of the nerves were processed for routine transmission electron microscopy and freeze-fracture techniques. Our results show that 30 h after the lesion there was asynchrony in the pattern of Wallerian degeneration, with different nerve fibers exhibiting variable degrees of axon disruption. This was observed by both techniques. Careful examination of several replicas revealed early changes in myelin membranes represented by vacuolization and splitting of consecutive lamellae, rearrangement of intramembranous particles and disappearance of paranodal transverse bands associated or not with retraction of paranodal myelin terminal loops from the axolemma. These alterations are compatible with a direct injury to the myelin sheath following nerve crush. The results are discussed in terms of a similar mechanism underlying both axon and myelin breakdown.

  13. Identification and Functional Characterization of Sugarcane Invertase Inhibitor (ShINH1: A Potential Candidate for Reducing Pre- and Post-harvest Loss of Sucrose in Sugarcane

    Directory of Open Access Journals (Sweden)

    Suresha G. Shivalingamurthy

    2018-05-01

    Full Text Available In sugarcane, invertase enzymes play a key role in sucrose accumulation and are also involved in futile reactions where sucrose is continuously degraded during the pre- and post-harvest period, thereby reducing sugar yield and recovery. Invertase inhibitor (INVINH proteins play a key role in post-translation regulation of plant invertases through which sucrose hydrolysis is controlled. INVINH proteins are small (18 kDa members of the pectin methylesterase inhibitor superfamily and they are moderately conserved across plants. In the present study, we identified two INVINH genes from sugarcane, ShINH1 and ShINH2. In silico characterization of the encoded proteins revealed 43% sequence identity at the amino acid level, confirming the non-allelic nature of the proteins. The presence of putative signal peptide and subcellular targeting sequences revealed that ShINH1 and ShINH2 likely have apoplasmic and vacuolar localization, respectively. Experimental visualization of ShINH1–GFP revealed that ShINHI is indeed exported to the apoplast. Differential tissue-specific and developmental expression of ShINH1 between leaf, stalk, flower and root suggest that it plays a role in controlling source-sink metabolic regulation during sucrose accumulation in sugarcane. ShINH1 is expressed at relatively high levels in leaves and stalk compared to flowers and roots, and expression decreases significantly toward internodal maturity during stalk development. ShINH1 is expressed at variable levels in flowers with no specific association to floral maturity. Production of recombinant ShINH1 enabled experimental validation of protein function under in vitro conditions. Recombinant ShINH1 potently inhibited acid invertase (IC50 22.5 nM, making it a candidate for controlling pre- and post-harvest deterioration of sucrose in sugarcane. Our results indicate that ShINH1 and ShINH2 are likely to play a regulatory role in sucrose accumulation and contribute to the improvement

  14. Sugarcane biorefineries: Case studies applied to the Brazilian sugar–alcohol industry

    International Nuclear Information System (INIS)

    Renó, Maria Luiza Grillo; Olmo, Oscar Almazán del; Palacio, José Carlos Escobar; Lora, Electo Eduardo Silva; Venturini, Osvaldo José

    2014-01-01

    Highlights: • Advanced system of co-generation improves the energy performance of biorefineries. • Sugarcane straw as additional source of fuel in the biorefinery resulted positive. • The farming and transport of sugarcane cause the main environmental impacts. - Abstract: The use of biomasses is becoming increasingly appealing alternative, to give an partial solution lack of energy, with an ecofriendly approach, having on sugarcane a solid fundament; that receives the new and valuable complement of the innovative concept of the biorefineries it is productive installations, that can be summarized as to reach the higher overall yield from the raw materials, with the lowest environmental impact, at minimum energy input and giving the maximum of the energy output. The biorefinery is the true valuable option of a wide diversification, with by-products like the single cell protein and biogas from the distillery vinasse, new oxidants like methanol, second generation biofuels, biobutanol, etc. In this context this paper presents a study of five different configurations of biorefineries. Each case study being a system based on an autonomous distillery or sugar mill with an annexed distillery and coproduction of methanol from bagasse. The paper includes the use of sugarcane harvest residues (mainly straw) and a BIG–GT plant (Biomass Integrated Gasification–Gas Turbine) as alternatives to fulfill the energy demands of the complex

  15. Cultivating C4 crops in a changing climate: sugarcane in Ghana

    International Nuclear Information System (INIS)

    Black, Emily; Vidale, Pier Luigi; Osborne, Tom; Van den Hoof, Catherine; Verhoef, Anne; Cuadra, Santiago Vianna

    2012-01-01

    Over the next few decades, it is expected that increasing fossil fuel prices will lead to a proliferation of energy crop cultivation initiatives. The environmental sustainability of these activities is thus a pressing issue—particularly when they take place in vulnerable regions, such as West Africa. In more general terms, the effect of increased CO 2 concentrations and higher temperatures on biomass production and evapotranspiration affects the evolution of the global hydrological and carbon cycles. Investigating these processes for a C4 crop, such as sugarcane, thus provides an opportunity both to extend our understanding of the impact of climate change, and to assess our capacity to model the underpinning processes. This paper applies a process-based crop model to sugarcane in Ghana (where cultivation is planned), and the São Paulo region of Brazil (which has a well-established sugarcane industry). We show that, in the Daka River region of Ghana, provided there is sufficient irrigation, it is possible to generate approximately 75% of the yield achieved in the São Paulo region. In the final part of the study, the production of sugarcane under an idealized temperature increase climate change scenario is explored. It is shown that doubling CO 2 mitigates the degree of water stress associated with a 4 °C increase in temperature. (letter)

  16. Frequency and distribution of the brown rust resistance gene Bru1 and implications for the Louisiana sugarcane breeding programme

    Science.gov (United States)

    Brown rust, caused by the fungus Puccinia melanocephala, is an important disease of sugarcane posing an increasing threat to sugarcane industries worldwide. A major gene, Bru1, has been shown to contribute a significant proportion of brown rust resistance in multiple sugarcane industries. The recent...

  17. Probing genetic diversity to characterize red rot resistance in sugarcane

    Energy Technology Data Exchange (ETDEWEB)

    Mumtaz, A S; Dure-e-Nayab,; Iqbal, M J; Shinwari, Z.K., E-mail: asmumtaz@qau.edu.pk

    2011-10-15

    Genetic diversity was assessed in a set of twelve sugarcane genotypes using Random Amplified Polymorphic DNA (RAPD). A total of thirty-two oligo-primers were employed, sixteen of them revealed amplification at 149 loci, out of which 136 were polymorphic. The genotype SPSG-26 showed the highest number of polymorphic loci, followed by CSSG-668 and HSF-242. Pairwise genetic similarity ranged from 67.2% to 83.3%. The UPGMA cluster analysis resolved most of the accessions in two groups. The clustering pattern did not place all resistant varieties in one or related group which depict diverse resistance source in the present set of sugarcane varieties. Ten primers revealed genotype specific bands among which four primers (K07, H02, K10 and F01) produced multiple genotype specific bands that aid genotype identification especially those with red rot resistance. The present study not only provided information on the genetic diversity among the genotypes but also revealed the potential of RAPD-PCR markers for genotype identification and therefore could be utilized in marker assisted selection for red rot resistance in sugarcane. (author)

  18. Crushed tablets: does the administration of food vehicles and thickened fluids to aid medication swallowing alter drug release?

    Science.gov (United States)

    Manrique, Yady J; Lee, Danielle J; Islam, Faiza; Nissen, Lisa M; Cichero, Julie A Y; Stokes, Jason R; Steadman, Kathryn J

    2014-01-01

    To evaluate the influence of co-administered vehicles on in vitro dissolution in simulated gastric fluid of crushed immediate release tablets as an indicator for potential drug bioavailability compromise. Release and dissolution of crushed amlodipine, atenolol, carbamazepine and warfarin tablets were tested with six foods and drinks that are frequently used in the clinical setting as mixers for crushed medications (water, orange juice, honey, yoghurt, strawberry jam and water thickened with Easythick powder) in comparison to whole tablets. Five commercial thickening agents (Easythick Advanced, Janbak F, Karicare, Nutilis, Viscaid) at three thickness levels were tested for their effect on the dissolution of crushed atenolol tablets. Atenolol dissolution was unaffected by mixing crushed tablets with thin fluids or food mixers in comparison to whole tablets or crushed tablets in water, but amlodipine was delayed by mixing with jam. Mixing crushed warfarin and carbamazepine tablets with honey, jam or yoghurt caused them to resemble the slow dissolution of whole tablets rather than the faster dissolution of crushed tablets in water or orange juice. Crushing and mixing any of the four medications with thickened water caused a significant delay in dissolution. When tested with atenolol, all types of thickening agents at the greatest thickness significantly restricted dissolution, and products that are primarily based on xanthan gum also delayed dissolution at the intermediate thickness level. Dissolution testing, while simplistic, is a widely used and accepted method for comparing drug release from different formulations as an indicator for in vivo bioavailability. Thickened fluids have the potential to retard drug dissolution when used at the thickest levels. These findings highlight potential clinical implications of the addition of these agents to medications for the purpose of dose delivery and indicate that further investigation of thickened fluids and their

  19. Sugarcane transcriptome analysis in response to infection caused by Acidovorax avenae subsp. avenae.

    Directory of Open Access Journals (Sweden)

    Ailton B Santa Brigida

    Full Text Available Sugarcane is an important tropical crop mainly cultivated to produce ethanol and sugar. Crop productivity is negatively affected by Acidovorax avenae subsp avenae (Aaa, which causes the red stripe disease. Little is known about the molecular mechanisms triggered in response to the infection. We have investigated the molecular mechanism activated in sugarcane using a RNA-seq approach. We have produced a de novo transcriptome assembly (TR7 from sugarcane RNA-seq libraries submitted to drought and infection with Aaa. Together, these libraries present 247 million of raw reads and resulted in 168,767 reference transcripts. Mapping in TR7 of reads obtained from infected libraries, revealed 798 differentially expressed transcripts, of which 723 were annotated, corresponding to 467 genes. GO and KEGG enrichment analysis showed that several metabolic pathways, such as code for proteins response to stress, metabolism of carbohydrates, processes of transcription and translation of proteins, amino acid metabolism and biosynthesis of secondary metabolites were significantly regulated in sugarcane. Differential analysis revealed that genes in the biosynthetic pathways of ET and JA PRRs, oxidative burst genes, NBS-LRR genes, cell wall fortification genes, SAR induced genes and pathogenesis-related genes (PR were upregulated. In addition, 20 genes were validated by RT-qPCR. Together, these data contribute to a better understanding of the molecular mechanisms triggered by the Aaa in sugarcane and opens the opportunity for the development of molecular markers associated with disease tolerance in breeding programs.

  20. Sugarcane transcriptome analysis in response to infection caused by Acidovorax avenae subsp. avenae.

    Science.gov (United States)

    Santa Brigida, Ailton B; Rojas, Cristian A; Grativol, Clícia; de Armas, Elvismary M; Entenza, Júlio O P; Thiebaut, Flávia; Lima, Marcelo de F; Farrinelli, Laurent; Hemerly, Adriana S; Lifschitz, Sérgio; Ferreira, Paulo C G

    2016-01-01

    Sugarcane is an important tropical crop mainly cultivated to produce ethanol and sugar. Crop productivity is negatively affected by Acidovorax avenae subsp avenae (Aaa), which causes the red stripe disease. Little is known about the molecular mechanisms triggered in response to the infection. We have investigated the molecular mechanism activated in sugarcane using a RNA-seq approach. We have produced a de novo transcriptome assembly (TR7) from sugarcane RNA-seq libraries submitted to drought and infection with Aaa. Together, these libraries present 247 million of raw reads and resulted in 168,767 reference transcripts. Mapping in TR7 of reads obtained from infected libraries, revealed 798 differentially expressed transcripts, of which 723 were annotated, corresponding to 467 genes. GO and KEGG enrichment analysis showed that several metabolic pathways, such as code for proteins response to stress, metabolism of carbohydrates, processes of transcription and translation of proteins, amino acid metabolism and biosynthesis of secondary metabolites were significantly regulated in sugarcane. Differential analysis revealed that genes in the biosynthetic pathways of ET and JA PRRs, oxidative burst genes, NBS-LRR genes, cell wall fortification genes, SAR induced genes and pathogenesis-related genes (PR) were upregulated. In addition, 20 genes were validated by RT-qPCR. Together, these data contribute to a better understanding of the molecular mechanisms triggered by the Aaa in sugarcane and opens the opportunity for the development of molecular markers associated with disease tolerance in breeding programs.

  1. Bench-scale experimental determination of the thermal diffusivity of crushed tuff

    International Nuclear Information System (INIS)

    Ryder, E.E.; Finley, R.E.; George, J.T.; Ho, C.K.; Longenbaugh, R.S.; Connolly, J.R.

    1996-06-01

    A bench-scale experiment was designed and constructed to determine the effective thermal diffusivity of crushed tuff. Crushed tuff particles ranging from 12.5 mm to 37.5 mm (0.5 in. to 1.5 in.) were used to fill a cylindrical volume of 1.58 m 3 at an effective porosity of 0.48. Two iterations of the experiment were completed; the first spanning approximately 502 hours and the second 237 hours. Temperatures near the axial heater reached 700 degrees C, with a significant volume of the test bed exceeding 100 degrees C. Three post-test analysis techniques were used to estimate the thermal diffusivity of the crushed tuff. The first approach used nonlinear parameter estimation linked to a one dimensional radial conduction model to estimate thermal diffusivity from the first 6 hours of test data. The second method used the multiphase TOUGH2 code in conjunction with the first 20 hours of test data not only to estimate the crushed tuffs thermal diffusivity, but also to explore convective behavior within the test bed. Finally, the nonlinear conduction code COYOTE-II was used to determine thermal properties based on 111 hours of cool-down data. The post-test thermal diffusivity estimates of 5.0 x 10-7 m 2 /s to 6.6 x 10-7 m 2 /s were converted to effective thermal conductivities and compared to estimates obtained from published porosity-based relationships. No obvious match between the experimental data and published relationships was found to exist; however, additional data for other particle sizes and porosities are needed

  2. Influence of the catalyzer in the esterification of the sugarcane bagasse fibers

    International Nuclear Information System (INIS)

    Maia, Tatiana F.; Mulinari, Daniella R.; Suzuki, Paulo A.

    2011-01-01

    In this work chemical modification of the sugarcane bagasse fibers by anhydride system using amount Abstract: In this work chemical modification of the sugarcane bagasse fibers by anhydride system using amount different of catalyze was studied. The chemical modification of the fibers was evaluated by techniques of X-Ray Diffractometry (XRD) and Infrared Spectrophotometer (FTIR). Results showed that the amount of catalyze influenced in the chemical modification of the fibers. (author)

  3. TECHNOLOGICAL SCENARIOS TO THE DEMAND FOR SUGARCANE

    Directory of Open Access Journals (Sweden)

    Ana Paula Franco Paes Leme Barbosa

    2012-06-01

    Full Text Available From the first decade of the 2000s, it is clear that there is an increase in discussions involving sustainability, including the bioenergy issue, to which Brazil has drawn the attention due to advances in the ethanol industry. Advances in engine technology reflected new opportunities for this industry and, according to the Ten-Year Energy Plan for 2019 developed by the Ministry of Mines and Energy, there is an expected increase in demand for ethanol of 90% by 2019 (Brazil, 2010. However, new technologies for the conversion and use of sugarcane and the complex context of this industry add uncertainties to this sector. Aiming to discuss and include the uncertainties on the agenda of this industry, this study proposes to elaborate and discuss prospective scenarios to the demand for sugarcane. Four scenarios with different perspectives of technological advance and market development were elaborated and discussed in the conclusion.

  4. Where is sugarcane cropping expanding in the brazilian cerrado, and why? A case study

    NARCIS (Netherlands)

    Arruda, de M.R.; Giller, K.E.; Slingerland, M.A.

    2017-01-01

    Sugarcane growing area in Brazil sharply expanded between 2000 and 2010 due to the increasing world demand for sugar and ethanol. Since this expansion of sugarcane is said to occur in areas covered by degraded pastures, it is likely not threatening the environment or food production. In order to

  5. Genotyping Sugarcane for the Brown Rust Resistance Locus Bru1 Using Unlabeled Probe Melting

    Science.gov (United States)

    Brown rust, caused by the fungus Puccinia melanocephala, is a major disease of sugarcane (Saccharum spp.) in Florida, Louisiana, and other sugarcane growing regions. The Bru1 locus has been used as a durable and effective source of resistance, and markers are available to select for the trait. The...

  6. Scale insects (Hemiptera: Coccomorpha) on sugarcane in Colombia, with description of a new species of Tillancoccus Ben-Dov (Coccidae).

    Science.gov (United States)

    Caballero, Alejandro; Ramos-Portilla, Andrea Amalia; Kondo, Takumasa

    2017-05-02

    Herein we describe a new species, Tillancoccus koreguajae Caballero & Ramos, sp. n. (Hemiptera: Coccidae) from Colombia collected on sugarcane. Pinnaspis strachani (Cooley) is also recorded on sugarcane for the first time worldwide. An updated list of seven species of Coccomorpha on sugarcane in Colombia is provided, including information on its distribution, biology, and mutualistic ants for each species. Seven species of scale insects (Hemiptera: Coccomorpha) have been recorded previously on sugarcane, Saccharum officinarum L. (Poaceae) in Colombia: Pseudococcidae: Dysmicoccus boninsis (Kuwana), D. brevipes (Cockerell), Pseudococcus calceolariae (Maskell), Saccharicoccus sacchari (Cockerell); Coccidae: Pulvinaria elongata Newstead; Diaspididae: Duplachionaspis divergens (Green) and Serenaspis minima (Maskell). However, the record of S. minima in Colombia is considered doubtful as there are no voucher specimens from Colombia and because the distribution of this species is currently limited to the Australasian region. Pseudococcus calceolariae is present in Colombia but its record on sugarcane is also doubtful. A taxonomic key for the identification of scale insects on sugarcane in Colombia is provided.

  7. Vinasse from Sugarcane Ethanol Production: Better Treatment or Better Utilization?

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues Reis, Cristiano E.; Hu, Bo, E-mail: bhu@umn.edu [Department of Bioproducts and Biosystems Engineering, University of Minnesota, Saint Paul, MN (United States)

    2017-04-10

    Ethanol production from sugarcane in Brazil is a well-established industry, with relatively simple operations and high yield. The ethanol primarily serves as a renewable fuel blending with gasoline and diesel to increase the energy security in Brazil. Several environmental concerns are emerged around the by-products from this industry. Vinasse, the liquid fraction generated from the rectification and distillation operations of ethanol, is a sulfur-rich, low pH, dark-colored, and odorous effluent, produced at volumes as high as 20-fold of ethanol. Traditional wastewater treatments, such as bioprocessing, advanced oxidative processes, anaerobic digestion (AD), and chemical-based processes, have been applied to vinasse management. Despite most of its utilization being in fertirrigation practices, vinasse may represent a key factor in enhancing profitability and environmental outcomes of a sugarcane-to-ethanol plant. The application of some upgrade solutions to sugarcane-derived vinasse may represent additional sources of energy, production of animal feed components, and reduction in water consumption within a plant. The use of mature technologies, yet not widespread in the sugarcane-to-ethanol industry, could help attenuate environmental concerns. Oxidation and chemical processes, AD, and microbial fermentation have been presented as alternative impactful alternatives to (i) reduce its organic and mineral load, converting it to a feedstock with fewer environmental applications when applied as fertilizer and (ii) to convert organic matter and nutrients to a nutritious biomass, simultaneously increasing water reclamation potential by plants. This mini-review article provides a critical and comprehensive summary of the alternatives developed or under development to vinasse management.

  8. Isolation and characterization of pulp from sugarcane bagasse and rice straw

    International Nuclear Information System (INIS)

    Saiful Azhari, S.; Suhardy, D.; Kasim, F.H; Nazry Saleh, M.

    2007-01-01

    The amount of sugarcane bagasse and rice straw in the state of Perlis (Malaysia) is abundant while its utilization is still limited. One of the alternatives for the bagasse and straw utilization is as pulp raw material. This paper reviews on pulp from sugarcane bagasse and rice straw and its suitability for paper production. In this study, the pulp was extracted by the Soxhlet extraction method. The objective of this study was to investigate the cellulose, lignin and silica content of the pulp from sugarcane bagasse and rice straw. For rice straw, the presence of large amount of pentosanes in the pulp and black liquors, which also contain silica were decreased the using of straw in the paper industry. Therefore, formic acid pulping and NaOH treatment are studied to reduce or prevent silica. The isolated pulp samples were further characterized by Scanning Electron Microscope (SEM) to investigate their fiber dimensions. (Author)

  9. AREAS OF ECONOMIC INFLUENCE OF SUGARCANE INDUSTRY IN MATO GROSSO, 2010.

    Directory of Open Access Journals (Sweden)

    Wladimir Colman de Azevedo Junior

    2015-09-01

    Full Text Available The Macroeconomic data reveals the increase of sugarcane chain relevance to Mato Grosso economy, however does not exist studies that evaluate the scope of regional impacts. This research has as the main objective the identification of the territory extension of the sugarcane industry influence in Mato Grosso during 2010, characterizing relationships between industrial plants and the regions where they acting. Was used the gravitational model developed by Isard (1956 to estimate this interrelation commerce patterns of the chain in the state, to find the sugarcane regional centers, as well as, to set up their potential areas of influence. As results has the identification of the 13 cane regions, three cities in first level, seven in the second level and three sub-centers. The relations between this centers and the respective regions has different specifications and their complete understanding allows destination of private investments and public politics. Keywords: Gravitational Model. Cane Sugar Suply Chain. Mato Grosso.

  10. Distribution of crushing strength of tablets

    DEFF Research Database (Denmark)

    Sonnergaard, Jørn

    2002-01-01

    The distribution of a given set of data is important since most parametric statistical tests are based on the assumption that the studied data are normal distributed. In analysis of fracture mechanics the Weibull distribution is widely used and the derived Weibull modulus is interpreted as a mate...... data from nine model tablet formulations and four commercial tablets are shown to follow the normal distribution. The importance of proper cleaning of the crushing strength apparatus is demonstrated....

  11. Biogas Production from Sugarcane Waste: Assessment on Kinetic Challenges for Process Designing

    Science.gov (United States)

    Janke, Leandro; Leite, Athaydes; Nikolausz, Marcell; Schmidt, Thomas; Liebetrau, Jan; Nelles, Michael; Stinner, Walter

    2015-01-01

    Biogas production from sugarcane waste has large potential for energy generation, however, to enable the optimization of the anaerobic digestion (AD) process each substrate characteristic should be carefully evaluated. In this study, the kinetic challenges for biogas production from different types of sugarcane waste were assessed. Samples of vinasse, filter cake, bagasse, and straw were analyzed in terms of total and volatile solids, chemical oxygen demand, macronutrients, trace elements, and nutritional value. Biochemical methane potential assays were performed to evaluate the energy potential of the substrates according to different types of sugarcane plants. Methane yields varied considerably (5–181 Nm3·tonFM−1), mainly due to the different substrate characteristics and sugar and/or ethanol production processes. Therefore, for the optimization of AD on a large-scale, continuous stirred-tank reactor with long hydraulic retention times (>35 days) should be used for biogas production from bagasse and straw, coupled with pre-treatment process to enhance the degradation of the fibrous carbohydrates. Biomass immobilization systems are recommended in case vinasse is used as substrate, due to its low solid content, while filter cake could complement the biogas production from vinasse during the sugarcane offseason, providing a higher utilization of the biogas system during the entire year. PMID:26404248

  12. Characterization of typical aquatic humic substances in areas of sugarcane cultivation in Brazil using tetramethylammonium hydroxide thermochemolysis

    Energy Technology Data Exchange (ETDEWEB)

    Tadini, A.M.; Constantino, I.C. [Departamento de Química e Ciências Ambientais, Instituto de Biociências, Letras e Ciências Exatas, Universidade Estadual Paulista “Júlio de Mesquita Filho”, R. Cristóvão Colombo 2265, 15054-000 São José do Rio Preto, SP (Brazil); Nuzzo, A.; Spaccini, R.; Piccolo, A. [Dipartimento Scienze del Suolo, della Pianta, e dell' Ambiente, Università di Napoli Federico II, Via Università 100, 80055 Portici (Italy); Moreira, A.B. [Departamento de Química e Ciências Ambientais, Instituto de Biociências, Letras e Ciências Exatas, Universidade Estadual Paulista “Júlio de Mesquita Filho”, R. Cristóvão Colombo 2265, 15054-000 São José do Rio Preto, SP (Brazil); and others

    2015-06-15

    Aquatic humic substances (AHSs) differ from one environment to another depending on land use and occupation. In addition, the effects of planting sugarcane on AHSs are not well known. Thus, the aim of this study was to characterize AHSs extracted from a river in a typical region of sugarcane cultivation during dry and rainy seasons. The main characteristics of the AHSs were obtained using Fourier transformation infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and off-line pyrolysis coupled with gas chromatography and mass spectrometry (off-line tetramethylammonium hydroxide (TMAH)-GC–MS-thermochemolysis). The FTIR and NMR results were used to infer that no distinctions occurred between the sampling periods. The samples were composed of aromatic groups that were potentially associated with the presence of residual vegetable materials (lignin). The results of the off-line TMAH-GC–MS-thermochemolysis indicated that the structures of the AHSs had uniform compositions that were rich in fatty acid methyl esters (FAMEs), polysaccharide derivatives, aliphatic biopolymers derived from plants, long hydrocarbon chains, branched alkyl groups and methylene carbons. Thus, the results showed that the AHSs obtained from the sugarcane cultivation area during the crop period mainly consisted of resistant aliphatic hydrocarbons, which are derivatives of lignin and FAMEs in compounds rich in humic acid. Therefore, we concluded that sugarcane cultivation produces changes in AHSs because greater amounts of lignin derivatives were observed during the dry season, corresponding to sugarcane cultivation. - Highlights: • AHSs differ from one environment to another depending on land use and occupation. • AHSs extracted from a river in a typical region of sugarcane cultivation. • AHSs from the sugarcane area are influenced by the soil use and occupation. • AHSs contain lignin derivatives, fatty acid methyl esters and others. • Lignin was observed with

  13. A local isotropic/global orthotropic finite element technique for modeling the crush of wood in impact limiters

    International Nuclear Information System (INIS)

    Attaway, S.W.; Yoshimura, H.R.

    1989-01-01

    Wood is often used as the energy absorbing material in impact limiters, because it begins to crush at low strains, then maintains a near constant crush stress up to nearly 60% volume reduction, and then locks up. Hill (Hill and Joseph, 1974) has performed tests that show that wood is an excellent absorber. However, wood's orthotropic behavior for large crush is difficult to model. In the past, analysts have used isotropic foam-like material models for modeling wood. A new finite element technique is presented in this paper that gives a better model of wood crush than the model currently in use. The orthotropic technique is based on locally isotropic, but globally orthotropic (LIGO) (Attaway, 1988) assumptions in which alternating layers of hard and soft crushable material are used. Each layer is isotropic; however, by alternating hard and soft thin layers, the resulting global behavior is orthotropic. In the remainder of this paper, the new technique for modeling orthotropic wood crush will be presented. The model is used to predict the crush behavior for different grain orientations of balsa wood. As an example problem, an impact limiter containing balsa wood as the crushable material is analyzed using both an isotropic model and the LIGO model

  14. Reclaimability of the spent sand mixture – sand with bentonite – sand with furfuryl resin

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2011-04-01

    Full Text Available Introduction of new binding materials and new technologies of their hardening in casting moulds and cores production requires theapplication of reclamation methods adequate to their properties as well as special devices realizing tasks. The spent sands circulationsystem containing the same kind of moulding and core sands is optimal from the point of view of the expected reclamation results.However, in the face of a significant variability of applied technologies and related to them various reclamation methods, the need - of theobtained reclamation products assessment on the grounds of systematic criteria and uniform bases – arises, with a tendency of indicatingwhich criteria are the most important for the given sand system. The reclaimability results of the mixture of the spent moulding sand withGeko S bentonite and the spent core sand with the Kaltharz 404U resin hardened by acidic hardener 100 T3, are presented in the paper.Investigations were performed with regard to the estimation of an influence of core sands additions (10 –25% on the reclaimed materialquality. Dusts and clay content in the reclaim, its chemical reaction (pH and ignition loss were estimated. The verification of the reclaiminstrumental assessment was performed on the basis of the technological properties estimation of moulding sand with bentonite, where the reclaimed material was used as a matrix.

  15. Health risks due to pre-harvesting sugarcane burning in São Paulo State, Brazil

    Directory of Open Access Journals (Sweden)

    Maria Leticia de Souza Paraiso

    2015-09-01

    Full Text Available After 2003, a new period of expansion of the sugarcane culture began in Brazil. Pre-harvesting burning of sugarcane straw is an agricultural practice that, despite the nuisance for the population and pollution generated, still persisted in over 70% of the municipalities of São Paulo State in 2010. In order to study the distribution of this risk factor, an ecological epidemiological study was conducted associating the rates of deaths and hospital admissions for respiratory diseases, for each municipality in the State, with the exposure to the pre-harvesting burning of sugarcane straw. A Bayesian multivariate regression model, controlled for the possible effects of socioeconomic and climate (temperature, humidity, and rainfall variations, has been used. The effect on health was measured by the standardized mortality and morbidity ratio. The measures of exposure to the pre-harvesting burning used were: percentage of the area of sugarcane harvested with burning, average levels of aerosol, and number of outbreaks of burning. The autocorrelation between data was controlled using a neighborhood matrix. It was observed that the increase in the number of outbreaks of burning was significantly associated with higher rates of hospital admissions for respiratory disease in children under five years old. Pre-harvesting burning of sugarcane effectively imposes risk to population health and therefore it should be eliminated.

  16. Reutilización de plástico pet, papel y bagazo de caña de azúcar, como materia prima en la elaboración de concreto ecológico para la construcción de viviendas de bajo costo

    OpenAIRE

    Reyna Pari, César Alberto

    2016-01-01

    In the present research was determined the results of reusing the PET plastic, paper and sugarcane bagasse waste as raw material in the manufacture of concrete ecological for the cheapest house building. For mix design, the extra forte Portland cement, gravel 1/2", coarse sand and the PET plastic, paper and sugarcane bagasse waste were used as raw material, these waste replaced to the coarse sand in weight percentages of 5%, 10% and 20% respectively. Specimens of simple concrete and concrete ...

  17. The Effects of Phrenic Nerve Degeneration by Axotomy and Crush on the Electrical Activities of Diaphragm Muscles of Rats.

    Science.gov (United States)

    Alkiş, Mehmet Eşref; Kavak, Servet; Sayır, Fuat; Him, Aydin

    2016-03-01

    The aim of this study was to investigate the effect of axotomy and crush-related degeneration on the electrical activities of diaphragm muscle strips of experimental rats. In the present study, twenty-one male Wistar-albino rats were used and divided into three groups. The animals in the first group were not crushed or axotomized and served as controls. Phrenic nerves of the rats in the second and third groups were crushed or axotomized in the diaphragm muscle. Resting membrane potential (RMP) was decreased significantly in both crush and axotomy of diaphragm muscle strips of experimental rats (p phrenic nerves may produce electrical activities in the diaphragm muscle of the rat by depolarization time and half-repolarization time prolonged in crush and axotomy rats.

  18. GENETIC VARIABILITY OF SUGARCANE-ASSOCIATED DIAZOTROPHIC BACTERIA CAPABLE OF INORGANIC PHOSPHATE SOLUBILIZING

    OpenAIRE

    Lira-Cadete, Luana; Barbosa de Farias, Andreza Raquel; de Souza Ramos, Andresa Priscila; da Costa, Diogo Paes; Freire, Fernando Jose; Kuklinsky-Sobral, Julia

    2013-01-01

    The sugarcane is a culture of great importance for the Brazilian agriculture. Every year this culture consumes great amounts of nitrogen and phosphate fertilizers. However, the use of plant growth-promoting bacteria can reduce the use of the chemical fertilizers, contributing to the economy and the environment conservation. So, the goal of this study was to select sugarcane-associated diazotrophic bacteria able to solubilize inorganic phosphate and to evaluate the genetic diversity of these b...

  19. Contribution of Root Respiration to Soil Respiration in Sugarcane Plantation in Thailand

    OpenAIRE

    Wilaiwan Sornpoon; Sebastien Bonnet; Poonpipope Kasemsap; Savitri Garivait

    2013-01-01

    The understanding on the contribution of root respiration to total soil respiration is still very limited, especially for sugarcane. In this study, trenching experiments in sugarcane plantations were conducted to separate and investigate soil respiration for this crop. The measurements were performed for the whole growing period of 344 days to quantify root respiration. The obtained monitoring data showed that the respiration rate is increasing with the age of the plant, accounting for up to ...

  20. Impact on demersal fish of a large-scale and deep sand extraction site with ecosystem-based landscaped sandbars

    Science.gov (United States)

    de Jong, Maarten F.; Baptist, Martin J.; van Hal, Ralf; de Boois, Ingeborg J.; Lindeboom, Han J.; Hoekstra, Piet

    2014-06-01

    For the seaward harbour extension of the Port of Rotterdam in the Netherlands, approximately 220 million m3 sand was extracted between 2009 and 2013. In order to decrease the surface area of direct impact, the authorities permitted deep sand extraction, down to 20 m below the seabed. Biological and physical impacts of large-scale and deep sand extraction are still being investigated and largely unknown. For this reason, we investigated the colonization of demersal fish in a deep sand extraction site. Two sandbars were artificially created by selective dredging, copying naturally occurring meso-scale bedforms to increase habitat heterogeneity and increasing post-dredging benthic and demersal fish species richness and biomass. Significant differences in demersal fish species assemblages in the sand extraction site were associated with variables such as water depth, median grain size, fraction of very fine sand, biomass of white furrow shell (Abra alba) and time after the cessation of sand extraction. Large quantities of undigested crushed white furrow shell fragments were found in all stomachs and intestines of plaice (Pleuronectes platessa), indicating that it is an important prey item. One and two years after cessation, a significant 20-fold increase in demersal fish biomass was observed in deep parts of the extraction site. In the troughs of a landscaped sandbar however, a significant drop in biomass down to reference levels and a significant change in species assemblage was observed two years after cessation. The fish assemblage at the crests of the sandbars differed significantly from the troughs with tub gurnard (Chelidonichthys lucerna) being a Dufrêne-Legendre indicator species of the crests. This is a first indication of the applicability of landscaping techniques to induce heterogeneity of the seabed although it remains difficult to draw a strong conclusion due the lack of replication in the experiment. A new ecological equilibrium is not reached after 2

  1. Use of radiation and in vitro techniques for development of salt tolerant mutants in sugarcane and potato

    International Nuclear Information System (INIS)

    Saif-Ur-Rasheed, M.; Asad, S.; Zafar, Y.; Waheed, R.A.

    2001-01-01

    Sugarcane and potato are propagated vegetatively and are important crops in Pakistan. Protocols were established to initiate callus and regenerate plants in sugarcane and to multiply potato in- vitro from nodal segments. Cultures of potato and sugarcane were irradiated with 5, 20, 40, and 60 Gy. Increase in radiation dose above 20 Gy reduced regeneration capacity of sugarcane callus. Doses higher than 20 Gy were lethal to micropropagated plants of potato. Culture of irradiated sugarcane callus on media containing salt was tried, but no regeneration was obtained. Variants for tolerance to salinity were selected, and evaluated under saline field conditions at four locations. The study showed that the selected variants of both sugarcane and potato were sensitive to high levels of salinity. Variants tested within the same salinity treatment did not differ significantly from each other in the traits investigated. Only boron uptake in the variants was much higher on saline soil than on the normal soil. Polymorphism was detected among the variants by DNA fingerprinting using randomly amplified polymorphic DNA (RAPD) markers. RAPD analysis showed that most of the variants reverted back to normal type. It is concluded that a large number of variants need be screened to obtain the desired mutants. (author)

  2. Nutritional parameters of steers receiving different levels of sunflower crushed in partial replacement of soybean meal

    Directory of Open Access Journals (Sweden)

    HELLEN L. LIMA

    2013-10-01

    Full Text Available ABSTRACT To evaluate of the sunflower crushed in nutritional parameters in steers, supplemented at pasture, we used four steers in 4×4 Latin square design. The supplements were provided in 6 g/kg of body weight/animal/day, consisting of sunflower crushed, corn, soybean meal and mineral. All the supplements was isonitrogenous and soybean meal was replaced in 0, 20, 40, and 60% for sunflower crushed. The determination of ruminal pH and ammonia was at 0, 2, 4, 6 and 8 h. after feeding and for short-chain fatty acids it was collected at 0 and 6 h. post-feeding. The dry matter intake was not affected (P>0.05 by inclusion of sunflower crushed (mean=6.59 kg/day. There was no significant effect (P>0.05 for pH for the inclusion of sunflower crushed (mean=6.41. For contents of ruminal NH3-N was a significant effect (P <0.05 only for collection time, and ammonia peaks occurred between 2 and 4 h after feeding, with values of 22.56 and 21.40 mg/dL. The total concentration of short chain fatty acids and the C2:C3 ratio was reduced in 9.6 and 15.43%. The ruminal degradability of NDF was not affected by the supplements. The supplementation with sunflower crushed to beef steers grazing, in partial replacement of soybean meal did not alter nutrition parameters.

  3. Assessment of crushed salt consolidation and fracture healing processes in a nuclear waste repository in salt

    International Nuclear Information System (INIS)

    1984-11-01

    For a nuclear waste repository in salt, two aspects of salt behavior are expected to contribute to favorable conditions for waste isolation. First, consolidation of crushed salt backfill due to creep closure of the underground openings may result in a backfill barrier with low permeability. Second, fractures created in the salt by excavation may heal under the influence of stress and temperature following sealing. This report reviews the status of knowledge regarding crushed salt consolidation and fracture healing, provides analyses which predict the rates at which the processes will occur under repository conditions, and develops requirements for future study. Analyses of the rate at which crushed salt will consolidate are found to be uncertain because of unexplained wide variation in the creep properties of crushed salt obtained from laboratory testing, and because of uncertainties in predictions of long term closure rates of openings in salt. This uncertainty could be resolved to a large degree by additional laboratory testing of crushed salt. Similarly, additional testing of fracture healing processes is required to confirm that healing will be effective under repository conditions. Extensive references, 27 figures, 5 tables

  4. Evaluation of Loss Resources during Sugarcane Production Process and Provide Solutions to Reduce Waste

    Directory of Open Access Journals (Sweden)

    H Zakidizaji

    2018-03-01

    Full Text Available Introduction No use of advanced mechanization and weakness in post harvesting technology are the main reasons of agricultural losses. Some of these wastes (agricultural losses are related to crop growing conditions in field and the remaining to processing of sugar in mill. The most useful priority setting methods for agricultural projects are the Analytic Hierarchy Process (AHP. So, this study presents an introduction of application manner of the AHP as a mostly common method of setting agricultural projects priorities. The purpose of this work is studying the sugarcane loss during production process using AHP in Khuzestan province. Materials and Methods The resources of sugarcane waste have been defined based on expert’s opinions. A questionnaire and personal interviews have formed the basis of this research. The study was applied to a panel of qualified informants made up of thirty-two experts. Those interviewed were distributed in Sugarcane Development and By-products Company in 2015-2016. Then, with using the analytical hierarchy process, a questionnaire was designed for defining the weight and importance of parameters effecting on sugarcane waste. For this method of evaluation, three main criteria considered, were yield criteria, cost criteria and income criteria. Criteria and prioritizing of them was done by questionnaire and interview with sophisticated experts. This technique determined and ranked the importance of sugarcane waste resources based on attributing relative weights to factors with respect to comments provided in the questionnaires. Analytical Hierarchy Process was done by using of software (Expert choice and the inconsistency rate on expert judgments was investigated. Results and Discussion How to use agricultural implements and machinery during planting and harvesting of sugarcane, can increase or decrease the volume of waste. In planting period, the losses mainly consists of loss of setts during cutting them by machine

  5. Treatment of solid waste highly contaminated by alpha emitters low-temperature impact crushing/leaching and incineration

    International Nuclear Information System (INIS)

    Carpentier, S.; Bertolotti, G.

    1986-01-01

    Reprocessing plants, hot laboratories, fuel fabrication plants all produce waste containing residual quantities of plutonium and uranium in oxide form which often reach some tens of grammes per m 3 . Appropriate treatment recovers an appreciable amount of fissile material, which could lead to the waste being declassified and able to be disposed of in near ground-level facilities. After a summary sorting at production level, waste can be sent to a low-temperature impact crushing/leaching unit which considerably reduces volumes to be stored. We call this process cryo-crushing/leaching. For burnable crushed particles, a further volume reduction may be obtained by incineration, an operation which is made easier by the low fissile material residue content. Incineration can, of course also be applied directly to burnable solid waste sorted at source and crushed following more conventional methods [fr

  6. Selected Abiotic and Biotic Environmental Stress Factors Affecting Two Economically Important Sugarcane Stalk Boring Pests in the United States

    Directory of Open Access Journals (Sweden)

    Allan T. Showler

    2016-02-01

    Full Text Available Sugarcane, Saccharum spp., in the United States is attacked by a number of different arthropod pests. The most serious among those pests are two stalk boring moths in the Family Crambidae: the sugarcane borer, Diatraea saccharalis (F., and the Mexican rice borer, Eoreuma loftini (Dyar. The two species are affected by abiotic and biotic environmental stress factors. Water deficit and excessive soil nitrogen alter physical and physiochemical aspects of the sugarcane plant that make the crop increasingly vulnerable to E. loftini. Weed growth can be competitive with sugarcane but it also supports enhanced abundances and diversity of natural enemies that can suppress infestations of D. saccharalis. In an instance where the stalk borer is considered a stress factor, proximity of vulnerable crops to sugarcane can influence levels of E. loftini infestation of sugarcane. The adverse effects of each stress factor, in terms of stalk borer attack, can be reduced by adopting appropriate cultural practices, such as adequate irrigation, judicious use of nitrogen fertilizer, using noncompetitive weed growth, and not planting vulnerable crops near sugarcane fields. Understanding the relationships between stress factors and crop pests can provide valuable insights for plant breeders and tools for incorporation into integrated pest management strategies.

  7. Callus induction, regeneration and transformation of sugarcane ...

    African Journals Online (AJOL)

    Yomi

    2012-03-22

    Mar 22, 2012 ... 2Department of Agronomy, Faculty of Agriculture, Khon Kaen University, Khonkaen 40002, Thailand. ... The genetic transformation was achieved ..... image processing. Int. J. Eng. Technol. 3(5): 297-301. Nasir NM, Qureshi RH, Aslam M (2000). Effect of salinity on emergence of sugarcane lines. Pak.

  8. Exposure- and flux-based assessment of ozone risk to sugarcane plants

    Science.gov (United States)

    Moura, Bárbara Baêsso; Hoshika, Yasutomo; Ribeiro, Rafael Vasconcelos; Paoletti, Elena

    2018-03-01

    Ozone (O3) is a toxic oxidative air pollutant, with significant detrimental effects on crops. Sugarcane (Saccharum spp.) is an important crop with no O3 risk assessment performed so far. This study aimed to assess O3 risk to sugarcane plants by using exposure-based indices (AOT40 and W126) based on O3 concentrations in the air, and the flux-based index (PODy, where y is a threshold of uptake) that considers leaf O3 uptake and the influence of environmental conditions on stomatal conductance (gsto). Two sugarcane genotypes (IACSP94-2094 and IACSP95-5000) were subjected to a 90-day Free-Air Controlled Experiment (FACE) exposure at three levels of O3 concentrations: ambient (Amb); Amb x1.2; and Amb x1.4. Total above-ground biomass (AGB), stalk biomass (SB) and leaf biomass (LB) were evaluated and the potential biomass production in a clean air was estimated by assuming a theoretical clean atmosphere at 10 ppb as 24 h O3 average. The Jarvis-type multiplicative algorithm was used to parametrize gsto including environmental factors i.e. air temperature, light intensity, air vapor pressure deficit, and minimum night-time temperature. Ozone exposure caused a negative impact on AGB, SB and LB. The O3 sensitivity of sugarcane may be related to its high gsto (∼535 mmol H2O m-2 s-1). As sugarcane is adapted to hot climate conditions, gsto was restricted when the current minimum air temperature (Tmin) was below ∼14 °C and the minimum night-time air temperature of the previous day (Tnmin) was below ∼7.5 °C. The flux-based index (PODy) performed better than the exposure-based indices in estimating O3 effect on biomass losses. We recommend a y threshold of 2 nmol m-2 s-1 to incorporate O3 effects on both AGB and SB and 1 nmol m-2 s-1 on LB. In order not to exceed 4% reduction in the growth of these two sugarcane genotypes, we recommend the following critical levels: 1.09 and 1.04 mmol m-2 POD2 for AGB, 0.91 and 0.96 mmol m-2 POD2 for SB, and 3.00 and 2.36 mmol m-2 POD1 for

  9. Optimal energy control of a crushing process based on vertical shaft impactor

    International Nuclear Information System (INIS)

    Numbi, B.P.; Xia, X.

    2016-01-01

    Highlights: • Energy optimal control strategy of a VSI crushing process is modeled. • Potential of a daily energy cost saving of about 49.7% is shown. • Potential of a daily energy saving of about 15.3% is shown. • Most of energy cost saving is due to the optimal load shifting under time-of-use tariff. • Energy saving is due to the operation of the process at the boundary of the admissible region. - Abstract: This paper presents an optimal control model to improve the operation energy efficiency of a vertical shaft impact (VSI) crushing process. The optimal control model takes the energy cost as the performance index to be minimized by accounting for the time-of-use tariff and process constraints such as storage capacity of the VSI crusher hopper, capacity of the main storage system, flow rate limits, cascade ratio setting, production requirement and product quality requirement. The control variables in the developed model are the belt conveyor feed rate, the material feed rate into the VSI crusher rotor, the bi-flow or cascade feed rate and the rotor tip speed of the crusher. These four control variables are optimally coordinated in order to improve the operation energy efficiency of the VSI crushing process. Simulation results based on a crushing process in a coal-fired power plant demonstrate a potential of a daily energy cost saving of about 49.7% and energy saving of about 15.3% in a high-demand season weekday.

  10. Functional characterization of sugarcane mustang domesticated transposases and comparative diversity in sugarcane, rice, maize and sorghum

    Directory of Open Access Journals (Sweden)

    Daniela Kajihara

    2012-01-01

    Full Text Available Transposable elements (TEs account for a large portion of plant genomes, particularly in grasses, in which they correspond to 50%-80% of the genomic content. TEs have recently been shown to be a source of new genes and new regulatory networks. The most striking contribution of TEs is referred as “molecular domestication”, by which the element coding sequence loses its movement capacity and acquires cellular function. Recently, domesticated transposases known as mustang and derived from the Mutator element have been described in sugarcane. In order to improve our understanding of the function of these proteins, we identified mustang genes from Sorghum bicolor and Zea mays and performed a phenetic analysis to assess the diversity and evolutionary history of this gene family. This analysis identified orthologous groups and showed that mustang genes are highly conserved in grass genomes. We also explored the transcriptional activity of sugarcane mustang genes in heterologous and homologous systems. These genes were found to be ubiquitously transcribed, with shoot apical meristem having the highest expression levels, and were downregulated by phytohormones. Together, these findings suggest the possible involvement of mustang proteins in the maintenance of hormonal homeostasis.

  11. Assessment of chemical and sensory quality of sugarcane alcoholic fermented beverage.

    Science.gov (United States)

    Resende Oliveira, Érica; Caliari, Márcio; Soares Soares Júnior, Manoel; Ribeiro Oliveira, Aryane; Cristina Marques Duarte, Renata; Valério de Barros Vilas Boas, Eduardo

    2018-01-01

    This study aimed to verify the technological feasibility, chemical quality and sensory acceptance of alcoholic fermented beverage obtained from sugarcane juice. A completely randomized design was applied. Sugar and alcohol content, phenolic (HPLC-MS) and volatile (GS-MS) compounds, pH, density, dry matter and acidity of the fermented beverage of sugarcane were quantified, as well as the acceptance of the product was carried out. The complete fermentation of sugarcane lasted 7 days, and it was obtained an alcohol content of 8.0% v/v. Titrable acidity of the beverage was of 67.31 meq L -1 , pH 4.03, soluble solids of 5 °Brix, reducing sugar of 0.07 g glucose 100 g -1 , density of 0.991 g cm -3 , reduced dry matter of 14.15 g L -1 , sulfates lower than 0.7 g K 2 SO 4  L -1 . Various phenolic compounds, among which, gallic acid (10.97%), catechin (1.73%), chlorogenic acid (3.52%), caffeic acid (1.49%), vanillic acid (0.28%), p -coumaric acid (0.24%), ferulic acid (6.63%), m -coumaric acid (0.36%), and o -coumaric acid (0.04%). Amongst aromatic compounds, were found mainly esters with fruity aromas (ethyl ester hexanoic acid and ethyl ester octanoic acid). The sugarcane juice can be commercialized as an alternative wine, as it presented adequate features to an alcoholic fermented beverage and was sensory accepted by consumers.

  12. environmental impact of aggregate mining by crush rock industries

    African Journals Online (AJOL)

    2012-07-02

    Jul 2, 2012 ... in form of crushed rock and it is also an essential con- stituent of many ... of production; processing or during extraction. Since .... reserves through deep quarrying. 1.3. ...... Audit Report of Port Harcourt Flour Mill Port Har- court.

  13. Design, Fabrication and Performance Evaluation of an Inter-Row Cultivator for Sugarcane Fields

    Directory of Open Access Journals (Sweden)

    Yuttana Khaehanchanpong

    2017-09-01

    Full Text Available The aims of this research were to design and fabricate an inter-row cultivator for mounting on a medium-sized tractor (25.3 or 37.3 kW for sugarcane fields, and to assess the performance of the cultivator when harvesting is conducted either by hand or with a sugarcane harvester. Moreover, this study was also designed to assess the performance of the cultivator in mixing sugarcane residues in the field. The inter-row cultivator has a working width of 80 cm, a rotor shaft speed of 500 rpm, and a total weight of 518 kg. The cultivator comprises 18 European C-type blades attached to three disk holder flanges arranged in a spiral formation. Two notch-cutting discs were mounted on the front to cut and press the sugarcane leaves before they were chopped and mixed by the inter-row cultivator. The working performance test was conducted for different thicknesses of trash blankets while using the inter-row cultivator mounted on 25.3 kW- and 37.3 kW-size tractors. The effective field capacity for trash incorporation of the inter-row cultivator was 0.30 ha·h−1 when trash was left through harvesting by hand. On the other hand, effective field capacity was 0.31 ha·h−1 when a sugarcane harvester was used. Moreover, the field efficiency exceeded 90% in all tested fields, with greater soil inversion. The results also showed that the fuel consumption of both tractors was higher when harvesting by hand compared with harvesting using a harvester.

  14. Evaluating the bio-energy potential of groundnut shell and sugarcane bagasse waste composite

    Directory of Open Access Journals (Sweden)

    Olatunde Ajani Oyelaran

    2015-12-01

    Full Text Available An assessment has been carried out on bio-coal briquettes from coal with sugarcane bagasse and coal with groundnut shell. Proximate analyses and elemental compositions of the coal and biomasses were determined. Different samples of briquettes were produced by blending varying composition of the coal with the biomasses in the ratio of 100:0; 90:10, 80:20, 70:30, 60:40, 50:50, 40:60 and 0: 100, using calcium carbonate as a desulfurizing agent and cassava starch as a binder. A manual hydraulically operated briquetting machine was used with the pressure kept at 5MPa. The results of the properties evaluated shows that biomass increases the burning efficiency of briquettes with increase in the biomass material, increasing combustion rate, faster ignition, producing lesser ash and fewer pollutants. Results obtained shows that the calorific value of briquettes produced from coal-groundnut shells and coal-sugarcane bagasse ranges from 16.94 - 20.81 and 17.31 – 21.03 MJ/kg respectively. The ignition time ranges from 6.9 – 12.5 minutes for coal-groundnut shells briquettes while that of coal-sugarcane bagasse ranges from 6.5 – 11.1 minutes. The bio-coal blends with sugarcane bagasse were better than that of groundnut shells. However, both sugarcane bagasse and groundnut shells produce bio-coal briquettes that are very efficient, providing sufficient heat as at the time necessary, generating less smoke and gases (e.g sulphur that are harmful to environment, and generating less ash, as these have adverse effect during cooking.

  15. Mining the enzymes involved in the detoxification of reactive oxygen species (ROS) in sugarcane.

    Science.gov (United States)

    Kurama, Eiko E; Fenille, Roseli C; Rosa, Vicente E; Rosa, Daniel D; Ulian, Eugenio C

    2002-07-01

    Summary Adopting the sequencing of expressed sequence tags (ESTs) of a sugarcane database derived from libraries induced and not induced by pathogens, we identified EST clusters homologous to genes corresponding to enzymes involved in the detoxification of reactive oxygen species. The predicted amino acids of these enzymes are superoxide dismutases (SODs), glutathione-S-transferase (GST), glutathione peroxidase (GPX), and catalases. Three MnSOD mitochondrial precursors and 10 CuZnSOD were identified in sugarcane: the MnSOD mitochondrial precursor is 96% similar to the maize MnSOD mitochondrial precursor and, of the 10 CuZnSOD identified, seven were 98% identical to maize cytosolic CuZnSOD4 and one was 67% identical to putative peroxisomal CuZnSOD from Arabidopsis. Three homologues to class Phi GST were 87-88% identical to GST III from maize. Five GPX homologues were identified: three were homologous to cytosolic GPX from barley, one was 88% identical to phospholipid hydroperoxide glutathione peroxidase (PHGPX) from rice, and the last was 71% identical to GPX from A. thaliana. Three enzymes similar to maize catalase were identified in sugarcane: two were similar to catalase isozyme 3 and catalase chain 3 from maize, which are mitochondrial, and one was similar to catalase isozyme 1 from maize, whose location is peroxisomal subcellular. All enzymes were induced in all sugarcane libraries (flower, seed, root, callus, leaves) and also in the pathogen-induced libraries, except for CuZnSOD whose cDNA was detected in none of the libraries induced by pathogens (Acetobacter diazotroficans and Herbaspirillum rubrisubalbicans). The expression of the enzymes SOD, GST, GPX, and catalases involved in the detoxification was examined using reverse transcriptase-polymerase chain reaction in cDNA from leaves of sugarcane under biotic stress conditions, inoculated with Puccinia melanocephala, the causal agent of sugarcane rust disease.

  16. Baseline effects of lysophosphatidylcholine and nerve growth factor in a rat model of sciatic nerve regeneration after crush injury

    Directory of Open Access Journals (Sweden)

    Ryan L Wood

    2018-01-01

    Full Text Available Schwann cells play a major role in helping heal injured nerves. They help clear debris, produce neurotrophins, upregulate neurotrophin receptors, and form bands of Büngner to guide the healing nerve. But nerves do not always produce enough neurotrophins and neurotrophin receptors to repair themselves. Nerve growth factor (NGF is an important neurotrophin for promoting nerve healing and lysophosphatidylcholine (LPC has been shown to stimulate NGF receptors (NGFR. This study tested the administration of a single intraneural injection of LPC (1 mg/mL for single LPC injection and 10 mg/mL for multiple LPC injections at day 0 and one (day 7, two (days 5 and 7, or three (days 5, 7, and 9 injections of NGF (160 ng/mL for single injections and 80 ng/mL for multiple injections to determine baseline effects on crushed sciatic nerves in rats. The rats were randomly divided into four groups: control, crush, crush-NGF, and crush-LPC-NGF. The healing of the nerves was measured weekly by monitoring gait; electrophysiological parameters: compound muscle action potential (CMAP amplitudes; and morphological parameters: total fascicle areas, myelinated fiber counts, fiber densities, fiber packing, and mean g-ratio values at weeks 3 and 6. The crush, crush-NGF, and crush-LPC-NGF groups statistically differed from the control group for all six weeks for the electrophysiological parameters but only differed from the control group at week 3 for the morphological parameters. The crush, crush-NGF, and crush-LPC-NGF groups did not differ from each other over the course of the study. Single injections of LPC and NGF one week apart or multiple treatments of NGF at 5, 7 and 9 days post-injury did not alter the healing rate of the sciatic nerves during weeks 1-6 of the study. These findings are important to define the baseline effects of NGF and LPC injections, as part of a larger effort to determine the minimal dose regimen of NGF to regenerate peripheral nerves.

  17. Current status of crushed rock and whole rock column studies

    International Nuclear Information System (INIS)

    Vine, E.N.; Daniels, W.R.; Rundberg, R.S.; Thompson, J.L.

    1980-01-01

    Measurements on a large number of crushed rock columns of tuff, granite, and argillite are discussed. The isotopes 85 Sr, 137 Cs, 133 Ba, 141 Ce, 152 Eu, /sup 95m/Tc, and 233 U were used. Flow rates were varied from approx. 30 to approx. 30000 m/y. Other parameters studied include isotope concentration and atmosphere. The sorption ratios calculated were compared with batch sorption ratios on the same samples. Methods of studying the movement of radionuclides through whole rock cores are described. The problems associated with sealing the cores to prevent leaking along the exterior surface and one possible solution are discussed. The strontium sorption ratio obtained by elution of one solid tuff core is compared with the batch and crushed rock column sorption ratios

  18. Assessment of Crushed Water Hyacinth ( Eichhornia crassipes ) as ...

    African Journals Online (AJOL)

    A preliminary study was conducted to evaluate and compare organic buffering capacity of crushed water hyacinth and calcium carbonate on acidic borehole water for aquaculture. Thirty, 25-litre shaded plastic tanks (20-litre filled with experimental water, pH 3.0) of three replicates per treatment of 180 g buffer agent were ...

  19. Eastern Scheldt Sand, Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Andersen, A. T; Madsen, E. B.; Schaarup-Jensen, A. L.

    The present data report contains data from 13 drained triaxial tests, performed on two different sand types in the Soil Mechanics Laboratory at Aalborg University in March, 1997. Two tests have been performed on Baskarp Sand No. 15, which has already ken extensively tested in the Soil Mechanics...... Laboratory. The remaining 11 triaxial tests have ben performed on Eastern Scheldt Sand, which is a material not yet investigated at the Soil Mechanics Laboratory. In the first pari of this data report, the characteristics of the two sand types in question will be presented. Next, a description...... will described. In this connection, the procedure for preparation of the soil specimens will be presented, and the actual performance of the tests will be briefly outlined. Finally, the procedure for processing of the measurements from the laboratory in order to obtain usable data will be described. The final...

  20. Integrated production of sugarcane ethanol and soybean biodiesel: Environmental and economic implications of fossil diesel displacement

    International Nuclear Information System (INIS)

    Souza, Simone P.; Seabra, Joaquim E.A.

    2014-01-01

    Highlights: • Sugarcane sector is responsible for around 4% of the diesel consumption in Brazil. • Soybean biodiesel can reduce the fossil diesel demand in the sugarcane sector. • The local use of biodiesel could reduce logistic problems and environmental burdens. • The sugarcane–soybean integration is likely to improve ethanol life cycle performance. • Fiscal incentives could reduce the economic uncertainties of the integration. - Abstract: The sugarcane industry in Brazil has been considered promising for the production of advanced fuels and bio-based products. However, the sugarcane crop requires high volumes of fossil fuel for cultivation and transport. The use of biodiesel as a diesel substitute could reduce the environmental burdens associated with this high consumption. This work performed a stochastic evaluation of the environmental and economic implications of the integrated production of sugarcane bioethanol and soybean biodiesel, in comparison with the traditional sugarcane-to-ethanol process. The analysis was focused on the states of Goiás, Mato Grosso and São Paulo, where this integration would be particularly attractive. The environmental aspects addressed were the fossil energy use and the GHG emissions in a cradle-to-gate approach. The economic analysis comprised the evaluation of the net present value of an incremental cash flow generated by the soybean production and by the adjacent plants of oil extraction and biodiesel. Results indicate that the integrated system is likely to improve the ethanol environmental performance, especially with regard to the fossil energy use. The integration is economically feasible but highly uncertain; however, it could be significantly improved through fiscal incentives to biodiesel producers, founded on the reduction of fossil energy use and on improvements in logistics. In addition, the proposed model may also assist in the design of other integrated systems applied to the sugarcane sector in Brazil

  1. Genetic variability among the brown rust resistant and susceptible genotypes of sugarcane by RAPD technique

    Science.gov (United States)

    Brown leaf rust in sugarcane is caused by Puccinia melanocephala (Syd. & P. Syd.), which is major cause of cultivar withdrawal. We attempted to analyze the RAPD diversity of two discrete phenotypic classes i.e. rust resistant (R) and rust susceptible (S) of six commercially available sugarcane elite...

  2. Alleviation of Salinity Effects by Exogenous Applications of Salicylic Acid in Sugarcane (Saccharum officinarum L. Seedlings

    Directory of Open Access Journals (Sweden)

    F Chaharlang Badil

    2016-12-01

    Full Text Available Introduction Abiotic stresses cause 71% reduction in crop yield around the world, from which 20% is related to salinity stress. The importance of sugarcane increases every day due to greater demand for sugar. Since sugarcane has mainly grown in arid and semi-arid regions, salinity is one of the main problems for this crop due to higher evaporation in these areas. Salicylic acid (SA is classified as a phyto – hormone and belongs to a group of phenol compounds. Salicylic acid can improve plant tolerance to abiotic stresses. This research aimed at studying the effect of SA on the alleviating of salinity stress in sugarcane. Materials and Methods The effects of salicylic acid on the growth and some physiological responses of sugarcane (Saccharum officinarum L. cv. CP69-1062 were studied under salt stress. The experiment design was a factorial of two factors, based on a randomized completely design with three replications. The experiment was conducted in a greenhouse at the Sugarcane Research and Training Institute of Khuzestan, Iran in 2012. Treatments evaluated in this study were three levels of salt stress, including (ECW

  3. Improvement of gaseous energy recovery from sugarcane bagasse by dark fermentation followed by biomethanation process.

    Science.gov (United States)

    Kumari, Sinu; Das, Debabrata

    2015-10-01

    The aim of the present study was to enhance the gaseous energy recovery from sugarcane bagasse. The two stage (biohydrogen and biomethanation) batch process was considered under mesophilic condition. Alkali pretreatment (ALP) was used to remove lignin from sugarcane bagasse. This enhanced the enzymatic digestibility of bagasse to a great extent. The maximum lignin removal of 60% w/w was achieved at 0.25 N NaOH concentration (50°C, 30 min). The enzymatic hydrolysis efficiency was increased to about 2.6-folds with alkali pretreated sugarcane bagasse as compared to untreated one. The maximum hydrogen and methane yields from the treated sugarcane bagasse by biohydrogen and biomethanation processes were 93.4 mL/g-VS and 221.8 mL/g-VS respectively. This process resulted in significant increase in energy conversion efficiency (44.8%) as compared to single stage hydrogen production process (5.4%). Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Cytidine 5’-diphosphocholine administration prevents peripheral neuropathic pain after sciatic nerve crush injury in rats

    Directory of Open Access Journals (Sweden)

    Emril DR

    2016-05-01

    Full Text Available Dessy R Emril,1 Samekto Wibowo,2 Lucas Meliala,2 Rina Susilowati3 1Department of Neurology, Faculty of Medicine, Syiah Kuala University, Banda Aceh, 2Department of Neurology, 3Department of Histology and Cell Biology, Faculty of Medicine, Universitas Gadjah Mada, Yogyakarta, IndonesiaBackground: Cytidine 5’-diphosphocholine (citicoline has been shown to have beneficial effects in central nervous system injury as well as in motoric functional recovery after peripheral nerve injury. This study aimed to examine the effect of citicoline on prevention of neuropathic pain in a rat model of sciatic nerve crush injury.Methods: Forty experimental rats were divided into four groups. In three groups, the right sciatic nerves were crushed in the mid-thigh region, and a gelatin sponge moistened with 0.4 or 0.8 mL of 100 µmol/L citicoline, or saline 0.4 mL in the control group, was applied. The fourth group of rats was sham-operated, ie the sciatic nerve was exposed with no crush. Functional assessments were performed 4 weeks after crush injury. von Frey filaments (100 g threshold were used to assess neuropathic pain. In addition, the sciatic functional index and extensor postural thrust (EPT tests were used to assess motoric function.Results: The crush/citicoline 0.4 mL group had a lower percentage of pain (23.53%, n=17 compared with the crush/saline group (53.33%, n=15, P<0.005. The crush/citicoline 0.4 mL group also showed better motoric recovery, as seen in stronger EPT results (P<0.001. However, the sciatic functional index analysis did not show significant differences between groups (P=0.35. The crush/citicoline 0.8 mL group showed a higher percentage of pain (66.67%, n=18 and less EPT recovery. These results may be explained by more severe nerve injury due to compression with a larger administered volume.Conclusion: In situ administration of 0.4 mL of 100 μmol/L citicoline prevents the occurrence of neuropathic pain and induces motoric recovery

  5. Carcass characteristics of lambs fed spineless cactus as a replacement for sugarcane.

    Science.gov (United States)

    de Oliveira, Juliana Paula Felipe; de Andrade Ferreira, Marcelo; Alves, Adryanne Marjorie Souza Vitor; de Melo, Ana Caroline Cerqueira; de Andrade, Ida Barbosa; Urbano, Stela Antas; Suassuna, Juraci Marcos Alves; de Barros, Leonardo José Assis; de Barros Melo, Tobias Tobit

    2018-04-01

    Fresh sugarcane has been a new roughage source for ruminant's in semiarid regions, a function of the decline of sugar and alcohol industry in recent years. However, there is little data published regarding lambs fed sugarcane associated with spineless cactus. This study evaluated the effect of sugarcane replacement with spineless cactus (0%, 33%, 66%, and 100%) in the diet of Santa Inês lambs on carcass characteristics. Thirty-six non-castrated Santa Ines lambs at four months of age and an initial body weight of 22±2.3 kg were assigned in a randomized block design and slaughtered after 70 days of confinement. The effects of spineless cactus as a replacement for sugarcane in the diet of the lambs on the carcass characteristics, commercial cut weight and yield, leg tissue composition, and carcass measurements were studied. The study revealed quadratic behavior in slaughter body weight, and hot and cold carcass weight, with maximum values of 38.60, 18.60, and 18.11 kg and replacement levels of 40.18%, 44.42%, and 43.14%, respectively. The cold carcass yield presented an increasing linear behavior. The compactness index of carcass and leg presented a quadratic effect, with estimated maximal values of 0.28 and 0.57 kg/cm and replacement levels of 43.37% and 45.5%, respectively. The weights of commercial cuts of leg, loin, shoulder, and breast showed quadratic behavior, with maximum values of 2.79, 0.852, 1.46, and 1.30 kg and replacement levels of 49.5, 45.32, 39.0, and 40.7, respectively. For tissue composition, quadratic behavior was verified for leg weight, subcutaneous fat, and total fat. The replacement of sugarcane by spineless cactus at level 44% is recommended for finishing lambs considering that this level improved most of the carcass characteristics, weights, and yields of commercial cuts and leg tissue composition.

  6. Soil and crop residue CO2-C emission under tillage systems in sugarcane-producing areas of southern Brazil

    Directory of Open Access Journals (Sweden)

    Luís Gustavo Teixeira

    2013-10-01

    Full Text Available Appropriate management of agricultural crop residues could result in increases on soil organic carbon (SOC and help to mitigate gas effect. To distinguish the contributions of SOC and sugarcane (Saccharum spp. residues to the short-term CO2-C loss, we studied the influence of several tillage systems: heavy offset disk harrow (HO, chisel plow (CP, rotary tiller (RT, and sugarcane mill tiller (SM in 2008, and CP, RT, SM, moldboard (MP, and subsoiler (SUB in 2009, with and without sugarcane residues relative to no-till (NT in the sugarcane producing region of Brazil. Soil CO2-C emissions were measured daily for two weeks after tillage using portable soil respiration systems. Daily CO2-C emissions declined after tillage regardless of tillage system. In 2008, total CO2-C from SOC and/or residue decomposition was greater for RT and lowest for CP. In 2009, emission was greatest for MP and CP with residues, and smallest for NT. SOC and residue contributed 47 % and 41 %, respectively, to total CO2-C emissions. Regarding the estimated emissions from sugarcane residue and SOC decomposition within the measurement period, CO2-C factor was similar to sugarcane residue and soil organic carbon decomposition, depending on the tillage system applied. Our approach may define new emission factors that are associated to tillage operations on bare or sugarcane-residue-covered soils to estimate the total carbon loss.

  7. Molecular characterization of soil organic matter from native vegetation–pasture–sugarcane transitions in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Dener Márcio da Silva, E-mail: denermsoliveira@gmail.com [University of São Paulo, Luiz de Queiroz College of Agriculture, Department of Soil Science, 11 Páduas Dias Avenue, 13418-900 Piracicaba, SP (Brazil); Colorado State University, Natural Resource Ecology Laboratory, 1231 East Drive, 80523-1499 Fort Collins, CO (United States); Schellekens, Judith; Cerri, Carlos Eduardo Pellegrino [University of São Paulo, Luiz de Queiroz College of Agriculture, Department of Soil Science, 11 Páduas Dias Avenue, 13418-900 Piracicaba, SP (Brazil)

    2016-04-01

    Replacing pastures (PA) with sugarcane (SG) has been deemed an agronomically feasible strategy for sugarcane expansion in Brazil. However, there are some uncertainties about the environmental impacts regarding this land use change (LUC), mainly related to soil organic matter (SOM), a key factor of environmental sustainability of Brazilian ethanol. LUC-related losses of SOM can overcome the C savings from biofuels. The molecular composition of SOM was evaluated to understand the C dynamics regarding LUC from PA to SG, using native vegetation (NV) as reference. Our study area was located in the south-central region of Brazil. Soil sampling was performed at three depths (0–0.1 m, 0.2–0.3 m and 0.9–1 m) in three representative sites with known LUC history and management practice since 1970. Pyrolysis–gas chromatography/mass spectrometry (Py–GC/MS) was chosen to study SOM chemistry. Content and isotopic composition of soil organic C and N were also determined. The LUC caused decreases on C and N contents and on δ{sup 13}C isotopic values. Depth was the major factor that influenced SOM composition, while the influence of LUC was mainly evident in surface soils and diminished rapidly with depth. The main difference in SOM composition undergoing the conversion PA-SG was a higher contribution from compounds associated to fresh litter inputs. The high contribution from fresh litter, having a relatively low mean residence time and increasing decomposition rates, is probably a major factor that drives C losses in areas undergoing sugarcane expansion. - Graphical abstract: We chose 3 sites in Brazil (1) and collected soil samples in areas undergoing LUC pasture–sugarcane (2) to evaluate SOM composition using Py–GC/MS (3). The LUC causes shifts on SOM signature (4), highlighting the increase of fresh litter compounds in sugarcane areas (5). - Highlights: • Effect of land use change (LUC) on SOM composition in Brazilian soils • Py-GC/MS of NaOH extractable SOM

  8. Potential to expand sustainable bioenergy from sugarcane in southern Africa

    International Nuclear Information System (INIS)

    Watson, Helen K.

    2011-01-01

    The Cane Resources Network for Southern Africa evaluated how bioenergy from sugarcane can support sustainable development and improve global competitiveness in the region. The assessment of six countries with good contemporary potential for expanding sugarcane cultivation described in this paper was part of their analysis. Its principal objective was to identify land where such production will not have detrimental environmental and/or socio-economic impacts. Geographic Information Systems (GIS) was used to interrogate 1 km 2 resolution protected area, land cover, climate, elevation and soil data sets. To avoid detrimental impacts on biodiversity, all categories of protected areas, closed canopy forests and wetlands were excluded. To safeguard food security, all areas under food and/or cash crop production were excluded. Areas unsuitable because of climate, terrain and soil constraints were also excluded. The assessment found that almost 6 million hectares of suitable land is available in these countries, clearly suggesting that 'land' is unlikely to be a limiting factor in harnessing sugarcane's bioenergy potential in the region. However, land identified as such in this study needs to be verified using better resolution, preferably ground, information.

  9. Survey of transposable elements in sugarcane expressed sequence tags (ESTs

    Directory of Open Access Journals (Sweden)

    Rossi Magdalena

    2001-01-01

    Full Text Available The sugarcane expressed sequence tag (SUCEST project has produced a large number of cDNA sequences from several plant tissues submitted or not to different conditions of stress. In this paper we report the result of a search for transposable elements (TEs revealing a surprising amount of expressed TEs homologues. Of the 260,781 sequences grouped in 81,223 fragment assembly program (Phrap clusters, a total of 276 clones showed homology to previously reported TEs using a stringent cut-off value of e-50 or better. Homologous clones to Copia/Ty1 and Gypsy/Ty3 groups of long terminal repeat (LTR retrotransposons were found but no non-LTR retroelements were identified. All major transposon families were represented in sugarcane including Activator (Ac, Mutator (MuDR, Suppressor-mutator (En/Spm and Mariner. In order to compare the TE diversity in grasses genomes, we carried out a search for TEs described in sugarcane related species O.sativa, Z. mays and S. bicolor. We also present preliminary results showing the potential use of TEs insertion pattern polymorphism as molecular markers for cultivar identification.

  10. Digital radiography of crush thoracic trauma in the Sichuan earthquake

    Science.gov (United States)

    Dong, Zhi-Hui; Shao, Heng; Chen, Tian-Wu; Chu, Zhi-Gang; Deng, Wen; Tang, Si-Shi; Chen, Jing; Yang, Zhi-Gang

    2011-01-01

    AIM: To investigate the features of crush thoracic trauma in Sichuan earthquake victims using chest digital radiography (CDR). METHODS: We retrospectively reviewed 772 CDR of 417 females and 355 males who had suffered crush thoracic trauma in the Sichuan earthquake. Patient age ranged from 0.5 to 103 years. CDR was performed between May 12, 2008 and June 7, 2008. We looked for injury to the thoracic cage, pulmonary parenchyma and the pleura. RESULTS: Antero-posterior (AP) and lateral CDR were obtained in 349 patients, the remaining 423 patients underwent only AP CDR. Thoracic cage fractures, pulmonary contusion and pleural injuries were noted in 331 (42.9%; 95% CI: 39.4%-46.4%), 67 and 135 patients, respectively. Of the 256 patients with rib fractures, the mean number of fractured ribs per patient was 3. Rib fractures were mostly distributed from the 3rd through to the 8th ribs and the vast majority involved posterior and lateral locations along the rib. Rib fractures had a significant positive association with non-rib thoracic fractures, pulmonary contusion and pleural injuries (P < 0.001). The number of rib fractures and pulmonary contusions were significant factors associated with patient death. CONCLUSION: Earthquake-related crush thoracic trauma has the potential for multiple fractures. The high number of fractured ribs and pulmonary contusions were significant factors which needed appropriate medical treatment. PMID:22132298

  11. Cultivar Evaluation and Essential Test Locations Identification for Sugarcane Breeding in China

    Directory of Open Access Journals (Sweden)

    Jun Luo

    2014-01-01

    Full Text Available The discrepancies across test sites and years, along with the interaction between cultivar and environment, make it difficult to accurately evaluate the differences of the sugarcane cultivars. Using a genotype main effect plus genotype-environment interaction (GGE Biplot software, the yield performance data of seven sugarcane cultivars in the 8th Chinese National Sugarcane Regional Tests were analyzed to identify cultivars recommended for commercial release. Fn38 produced a high and stable sugar yield. Gn02-70 had the lowest cane yield with high stability. Yz06-407 was a high cane yield cultivar with poor stability in sugar yield. Yz05-51 and Lc03-1137 had an unstable cane yield but relatively high sugar yield. Fn39 produced stable high sugar yield with low and unstable cane production. Significantly different sugar and cane yields were observed across seasons due to strong cultivar-environment interactions. Three areas, Guangxi Chongzuo, Guangxi Baise, and Guangxi Hechi, showed better representativeness of cane yield and sugar content than the other four areas. On the other hand, the areas Guangxi Chongzuo, Yunnan Lincang, and Yunnan Baoshan showed strong discrimination ability, while the areas Guangxi Hechi and Guangxi Liuzhou showed poor discrimination ability. This study provides a reference for cultivar evaluation and essential test locations identification for sugarcane breeding in China.

  12. Increased sink strength offsets the inhibitory effect of sucrose on sugarcane photosynthesis.

    Science.gov (United States)

    Ribeiro, Rafael V; Machado, Eduardo C; Magalhães Filho, José R; Lobo, Ana Karla M; Martins, Márcio O; Silveira, Joaquim A G; Yin, Xinyou; Struik, Paul C

    2017-01-01

    Spraying sucrose inhibits photosynthesis by impairing Rubisco activity and stomatal conductance (g s ), whereas increasing sink demand by partially darkening the plant stimulates sugarcane photosynthesis. We hypothesized that the stimulatory effect of darkness can offset the inhibitory effect of exogenous sucrose on photosynthesis. Source-sink relationship was perturbed in two sugarcane cultivars by imposing partial darkness, spraying a sucrose solution (50mM) and their combination. Five days after the onset of the treatments, the maximum Rubisco carboxylation rate (V cmax ) and the initial slope of A-C i curve (k) were estimated by measuring leaf gas exchange and chlorophyll fluorescence. Photosynthesis was inhibited by sucrose spraying in both genotypes, through decreases in V cmax , k, g s and ATP production driven by electron transport (J atp ). Photosynthesis of plants subjected to the combination of partial darkness and sucrose spraying was similar to photosynthesis of reference plants for both genotypes. Significant increases in V cmax , g s and J atp and marginal increases in k were noticed when combining partial darkness and sucrose spraying compared with sucrose spraying alone. Our data also revealed that increases in sink strength due to partial darkness offset the inhibition of sugarcane photosynthesis caused by sucrose spraying, enhancing the knowledge on endogenous regulation of sugarcane photosynthesis through the source-sink relationship. Copyright © 2016 Elsevier GmbH. All rights reserved.

  13. Anaerobic biodigestion of sugarcane vinasse under mesophilic conditions using manure as inoculum

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo de Farias Silva

    2016-11-01

    Full Text Available Sugarcane vinasse is one of the most polluting residues produced by Brazilian ethanol industries, mainly because of its harmful effects on the environmental, such as high organic matter load and acidity. Anaerobic digestion is a highly efficient wastewater treatment method that could potentially be used to treat sugarcane vinasse. This study examined the anaerobic biodigestion of sugarcane vinasse in mesophilic conditions (30 - 45°C by varying the inoculum concentration (0.5 to 5.5% and pH (6 - 8. Changes of Chemical Oxygen Demand (COD, total solids content, and yield and composition of biogas after the biodigestion of the vinasse were assessed. The vinasse was efficiently digested under mesophilic anaerobic conditions over a 23-day Hydraulic Retention Time (HRT and a 5-day acidogenic phase with a consequent reduction of COD (54 - 83% and total solids (52 - 87%. Statistical analyses at a confidence level of 95% suggested that temperature, pH and inoculum concentration did not influence on the anaerobic biodigestion of the vinasse. The optimal operating parameters were found to be temperatures of 30 - 35°C, inoculum concentration of 0.5% and pH of 6 - 7. The results emphasize the promising use of the treated sugarcane vinasse as a biofertilizer for agriculture, indicating that the anaerobic digestion process is an excellent alternative for Brazilian ethanol industries.

  14. Utilisation of sugarcane trash and other cellulosic wastes for production of oxalic acid

    Energy Technology Data Exchange (ETDEWEB)

    Mane, J D; Modak, H M; Ramaiah, N A; Jadhav, S J

    1988-01-01

    The nitric acid oxidation process was developed for the production of oxalic acid from sugarcane trash, groundnut shells, corn cobs and rice husks. Good yields of oxalic acid from the above raw materials were obtained under optimum conditions, with sugarcane trash as the preferable raw material. The absorption of waste nitrogen oxide gases in aqueous NaOH to get a valuable by-product, sodium nitrite, was also successful.

  15. A New Proposal Of Cellulosic Ethanol To Boost Sugarcane Biorefineries: Techno-economic Evaluation

    OpenAIRE

    Albarelli J.Q.; Ensinas A.V.; Silva M.A.

    2014-01-01

    Commercial simulator Aspen Plus was used to simulate a biorefinery producing ethanol from sugarcane juice and second generation ethanol production using bagasse fine fraction composed of parenchyma cells (P-fraction). Liquid hot water and steam explosion pretreatment technologies were evaluated. The processes were thermal and water integrated and compared to a biorefinery producing ethanol from juice and sugarcane bagasse. The results indicated that after thermal and water integration, the ev...

  16. Micromechanics of pressure-induced grain crushing in porous rocks

    Science.gov (United States)

    Zhang, Jiaxiang; Wong, Teng-Fong; Davis, Daniel M.

    1990-01-01

    The hydrostatic compaction behavior of a suite of porous sandstones was investigated at confining pressures up to 600 MPa and constant pore pressures ranging up to 50 MPa. These five sandstones (Boise, Kayenta, St. Peter, Berea, and Weber) were selected because of their wide range of porosity (5-35%) and grain size (60-460 μm). We tested the law of effective stress for the porosity change as a function of pressure. Except for Weber sandstone (which has the lowest porosity and smallest grain size), the hydrostat of each sandstone shows an inflection point corresponding to a critical effective pressure beyond which an accelerated, irrecoverable compaction occurs. Our microstructural observations show that brittle grain crushing initiates at this critical pressure. We also observed distributed cleavage cracking in calcite and intensive kinking in mica. The critical pressures for grain crushing in our sandstones range from 75 to 380 MPa. In general, a sandstone with higher porosity and larger grain size has a critical pressure which is lower than that of a sandstone with lower porosity and smaller grain size. We formulate a Hertzian fracture model to analyze the micromechanics of grain crushing. Assuming that the solid grains have preexisting microcracks with dimensions which scale with grain size, we derive an expression for the critical pressure which depends on the porosity, grain size, and fracture toughness of the solid matrix. The theoretical prediction is in reasonable agreement with our experimental data as well as other data from soil and rock mechanics studies for which the critical pressures range over 3 orders of magnitude.

  17. Analysis of the crush environment for lightweight air-transportable accident-resistant containers

    International Nuclear Information System (INIS)

    McClure, J.D.; Hartman, W.F.

    1981-12-01

    This report describes the longitudinal dynamic crush environment for a Lightweight Air-Transportable Accident-Resistant Container (LAARC, now called PAT-2) that can be used to transport small quantities of radioactive material. The analysis of the crush environment involves evaluation of the forces imposed upon the LAARC package during the crash of a large, heavily loaded, cargo aircraft. To perform the analysis, a cargo load column was defined which consisted of a longitudinal prism of cargo of cross-sectional area equal to the projected area of the radioactive-material package and length equal to the longitudinal extent of the cargo compartment in a commercial cargo jet aircraft. To bound the problem, two analyses of the cargo load column were performed, a static stability analysis and a dynamic analysis. The results of these analyses can be applied to other packaging designs and suggest that the physical limits or magnitude of the longitudinal crush forces, which are controlled in part by the yield strength of the cargo and the package size, are much smaller than previously estimated

  18. Hyperbaric oxygenation therapy for crush injuries reduces the risk of complications: research report.

    Science.gov (United States)

    Yamada, Noriaki; Toyoda, Izumi; Doi, Tomoaki; Kumada, Keisuke; Kato, Hisaaki; Yoshida, Shozo; Shirai, Kunihiro; Kanda, Norihide; Ogura, Shinji

    2014-01-01

    Hyperbaric oxygen (HBO2) therapy has been adopted for crush injuries, but there are few studies supporting its use. We therefore investigated the effects of HBO2 on management of patients with complicated crush injuries. This historic cohort study included patients with crush injuries and open fractures with severities greater than or equal to Gustilo class IIIA. We divided the patients into two groups: Control and HBO2. The control group received conventional treatment, while the HBO2 group received conventional treatment plus HBO2. We compared the groups with respect to the incidence of infection, need for additional surgery, and length of intensive care unit (ICU) and hospital stays. There were 16 patients in the HBO2 group and 13 in the control group. There were no patients with infections in the HBO2 group, whereas in the control group six patients had infections and five needed another drainage procedure. These incidences were significantly lower in the HBO2 group (p = 0.003 and 0.013). However, the durations of ICU and hospital stays were similar across the two groups. HBO2 is effective in the management of crush injuries from the viewpoint of reducing complications and reoperations. These observations should be verified in additional studies with larger sample sizes because the patient number is limited.

  19. Antioxidant enzymes activity in embryogenic and non-embryogenic tissues in Sugarcane

    International Nuclear Information System (INIS)

    Marina Medeiros de Araujo Silva; Ulisses, Claudia; Lacerda E Medeiros, Maria Jaislanny; Cavalcante Granja, Manuela Maria; Willadino, Lilia; Camara, Terezinha

    2014-01-01

    The objective of this work was to induce direct somatic embryogenesis from segments of immature leaves of the RB872552 variety of sugarcane and to correlate this morphogenic event with oxidative stress. Two previously described protocols were utilized for the induction of somatic embryogenesis in sugarcane with different supplementations of the culture medium and different incubation conditions. For the conversion of embryos into plants was used ms medium without phytoregulators. Histological analyses and activity of antioxidant enzymes were also conducted for the embryogenic and non-embryogenic tissues. The formation of somatic embryos was obtained in 81 % of the explants with the combination of regulators 2,4-D (2,4-dichlorophenoxyacetic acid)and BAP (6-benzylaminopurine) when incubated under 16 h photoperiod. With regards to the antioxidant enzymes, there was increased activity of peroxidase and an increase in the soluble protein content in embryogenic tissues, whereas lower activities of polyphenol oxidase and catalase appeared in these tissues compared to nonembryogenic tissues. It could be inferred that oxidative stress plays an important role in the induction of somatic embryogenesis in sugarcane.

  20. Water stress indices for the sugarcane crop on different irrigated surfaces

    Directory of Open Access Journals (Sweden)

    Rodrigo G. Brunini

    Full Text Available ABSTRACT Sugarcane (Saccharum officinarum L. is a crop of vital importance to Brazil, in the production of sugar and ethanol, power generation and raw materials for various purposes. Strategic information such as topography and canopy temperature can provide management technologies accessible to farmers. The objective of this study was to determine water stress indices for sugarcane in irrigated areas, with different exposures and slopes. The daily water stress index of the plants and the water potential in the soil were evaluated and the production system was analyzed. The experiment was carried out in an “Experimental Watershed”, using six surfaces, two horizontal and the other ones with 20 and 40% North and South exposure slopes. Water stress level was determined by measuring the temperatures of the vegetation cover and the ambient air. Watering was carried out using a drip irrigation system. The results showed that water stress index of sugarcane varies according to exposure and slope of the terrain, while areas whose water stress index was above 5.0 oC had lower yield values.

  1. Pathogen toxin-indiced electrolyte leakage and phytoalexin accumulation as indices of red-rot (Colletotrichum falcatum Went resistance in sugarcane

    Directory of Open Access Journals (Sweden)

    D. Mohanraj

    2003-08-01

    Full Text Available A phytotoxin produced by the sugarcane red-rot fungus Colletotrichum falcatum Went was partially purified. The phytotoxin caused increased electrolyte leakage in susceptible sugarcane varieties and higher levels of phytoalexins (3-deoxyanthocyanidins in resistant sugarcane varieties. This relationship between phytotoxin induced changes and disease reaction could possibly be used as an additional index to rapidly identify red-rot resistant varieties.

  2. Liming in the sugarcane burnt system and the green harvest practice affect soil bacterial community in northeastern São Paulo, Brazil.

    Science.gov (United States)

    Val-Moraes, Silvana Pompeia; de Macedo, Helena Suleiman; Kishi, Luciano Takeshi; Pereira, Rodrigo Matheus; Navarrete, Acacio Aparecido; Mendes, Lucas William; de Figueiredo, Eduardo Barretto; La Scala, Newton; Tsai, Siu Mui; de Macedo Lemos, Eliana Gertrudes; Alves, Lúcia Maria Carareto

    2016-12-01

    Here we show that both liming the burnt sugarcane and the green harvest practice alter bacterial community structure, diversity and composition in sugarcane fields in northeastern São Paulo state, Brazil. Terminal restriction fragment length polymorphism fingerprinting and 16S rRNA gene cloning and sequencing were used to analyze changes in soil bacterial communities. The field experiment consisted of sugarcane-cultivated soils under different regimes: green sugarcane (GS), burnt sugarcane (BS), BS in soil amended with lime applied to increase soil pH (BSL), and native forest (NF) as control soil. The bacterial community structures revealed disparate patterns in sugarcane-cultivated soils and forest soil (R = 0.786, P = 0.002), and overlapping patterns were shown for the bacterial community structure among the different management regimes applied to sugarcane (R = 0.194, P = 0.002). The numbers of operational taxonomic units (OTUs) found in the libraries were 117, 185, 173 and 166 for NF, BS, BSL and GS, respectively. Sugarcane-cultivated soils revealed higher bacterial diversity than NF soil, with BS soil accounting for a higher richness of unique OTUs (101 unique OTUs) than NF soil (23 unique OTUs). Cluster analysis based on OTUs revealed similar bacterial communities in NF and GS soils, while the bacterial community from BS soil was most distinct from the others. Acidobacteria and Alphaproteobacteria were the most abundant bacterial phyla across the different soils with Acidobacteria Gp1 accounting for a higher abundance in NF and GS soils than burnt sugarcane-cultivated soils (BS and BSL). In turn, Acidobacteria Gp4 abundance was higher in BS soils than in other soils. These differential responses in soil bacterial community structure, diversity and composition can be associated with the agricultural management, mainly liming practices, and harvest methods in the sugarcane-cultivated soils, and they can be detected shortly after harvest.

  3. Florescimento em cana-de-açúcar Flowering in sugarcane

    Directory of Open Access Journals (Sweden)

    Rosilaine Araldi

    2010-03-01

    Full Text Available O florescimento da cana-de-açúcar é um processo fisiológico complexo formado por vários estádios de desenvolvimento, e cada estádio tem a sua própria necessidade ambiental e fisiológica. Os fatores externos relacionados com o florescimento são: fotoperíodo, temperatura, umidade e radiação solar, além da fertilidade do solo. Por outro lado, os fatores internos envolvem fitocromo, hormônios, florígeno, ácidos nucleicos, dentre outros. A intensidade do processo de florescimento e as consequências na qualidade da cana-de-açúcar variam com a variedade e com o clima. A redução do volume de caldo é o principal fator no qual o florescimento interfere, resultante do aumento do teor de fibras. Como as demais Poaceae, a cana-de-açúcar floresce, frutifica e morre, garantindo a perpetuação da espécie. Dessa forma, o homem procura interferir na natureza tentando evitar o florescimento da cana-de-açúcar, seja por meio de melhoramento genético ou por meio de reguladores vegetais. Em áreas comerciais de produção de cana-de-açúcar, onde há condições ideais para o florescimento da cultura, é recomendado o uso de variedade com potencial menos florífero. E, quando não é possível esse manejo varietal, o uso de inibidores do florescimento é a melhor alternativa para evitar mais perdas no conteúdo de sacarose.The sugarcane flowering is a complex physiological process that consists of several stages of development, each stage has its physiological and environmental requisition. The external factors related to flowering are: photoperiod, temperature, humidity, solar radiation in addition to soil fertility. Already the internal factors involved are: phytochrome, hormones, florigene, nucleic acids, among others. The intensity of the flowering and the consequences on the quality of sugarcane vary with the variety and the climate. The reduction of the sugarcane juice is the main factor which affected by the flowering, resulting

  4. Nitrate removal from aquaculture effluents using woodchip bioreactors improved by adding sulfur granules and crushed seashells

    DEFF Research Database (Denmark)

    von Ahnen, Mathis; Pedersen, Per Bovbjerg; Dalsgaard, Johanne

    2018-01-01

    This study examined the effects on nitrate removal when adding sulfur granules and crushed seashells to a woodchip bioreactor treating aquaculture effluents. Using a central composite design, the two components were added at three levels (0.000, 0.125 and 0.250 m3/m3 bioreactor volume) to 13......, the inclusion of crushed seashells together with sulfur granules helped to maintain the pH above 7.4 and prevent a production (i.e., release) of nitrite. According to the modeled response surfaces, a sulfur granule:crushed seashell:woodchip mixture ratio containing about 0.2 m3 sulfur granules and 0.1 m3...... crushed seashells per m3 reactor volume would give the best results with respect to high N removal and minimal nitrite release. In conclusion, the study showed that N removal in woodchip bioreactors may be improved by adding sulfur granules and seashells, contributing to the optimization of woodchip...

  5. Treatment of solid waste highly contaminated by alpha emitters: Low-temperature impact crushing, leaching and incineration

    International Nuclear Information System (INIS)

    Bertolotti, G.; Vigreux, B.; Caillol, A.; Koehly, G.

    1987-01-01

    Reprocessing plants, hot laboratories and fuel fabrication plants produce solid wastes containing residual amounts of plutonium and uranium in nitrate and oxide form at concentrations up to several tens of grams per m/sup 3/. Dismantling of nuclear facilities having handled these radioelements also generates large volumes of solid wastes highly contaminated with alpha emitters. It is desirable to process these alpha wastes to recover valuable fissile materials and/or permit surface storage. Solid waste treatment by low-temperature impact crushing and then leaching, after minimal sorting and classifying at the sites of production, meets the corresponding requirements for high volume reduction plus fissile material recovery or waste decontamination. Additional volume reduction of crushed wastes containing mainly combustible materials can be obtained by incineration. This is facilitated by the low fissile material content after low-temperature impact crushing and leaching. Sorted wastes can also be leached or incinerated directly after, in most cases, crushing by more conventional techniques

  6. Plant growth inhibitors isolated from sugarcane (Saccharum officinarum) straw.

    Science.gov (United States)

    Sampietro, Diego Alejandro; Vattuone, Marta Amelia; Isla, María Ines

    2006-07-01

    Several compounds related with plant defense and pharmacological activities have been isolated from sugarcane. Straw phytotoxins and their possible mechanisms of growth inhibition are largely unknown. A bioassay-guided fractionation of the phytotoxic constituents leachated from a sugarcane straw led to the isolation of trans-ferulic (trans-FA), cis-ferulic (cis-FA), vanillic (VA) and syringic (SA) acids. The straw leachates and their identified constituents significantly inhibited root growth of lettuce and four weeds. VA was more phytotoxic to root elongation than FA and SA. The identified phenolic compounds significantly increased leakage of root cell constituents, inhibited dehydrogenase activity and reduced chlorophyll content in lettuce. VA and FA inhibited mitotic index while SA increased cell division. Additive (VA-FA and FA-SA) and synergistic (VA-SA) interactions on root growth were observed at the response level of EC(25). Although the isolated compounds differed in their relative phytotoxic activities, the observed physiological responses suggest that they have a common mode of action. HPLC analysis indicated that sugarcane straw can potentially release 1.43 (ratio 2:1, trans:cis), 1.14 and 0.14mmolkg(-1) (straw dry weight) of FA, VA and SA, respectively. As phenolic acids are often found spatially concentrated in the top soil layers under plant straws, further studies are needed to establish the impact of these compounds in natural settings.

  7. Axial Crushing Behaviors of Thin-Walled Corrugated and Circular Tubes - A Comparative Study

    Science.gov (United States)

    Reyaz-Ur-Rahim, Mohd.; Bharti, P. K.; Umer, Afaque

    2017-10-01

    With the help of finite element analysis, this research paper deals with the energy absorption and collapse behavior with different corrugated section geometries of hollow tubes made of aluminum alloy 6060-T4. Literature available experimental data were used to validate the numerical models of the structures investigated. Based on the results available for symmetric crushing of circular tubes, models were developed to investigate corrugated thin-walled structures behavior. To study the collapse mechanism and energy absorbing ability in axial compression, the simulation was carried in ABAQUS /EXPLICIT code. In the simulation part, specimens were prepared and axially crushed to one-fourth length of the tube and the energy diagram of crushing force versus axial displacement is shown. The effect of various parameters such as pitch, mean diameter, corrugation, amplitude, the thickness is demonstrated with the help of diagrams. The overall result shows that the corrugated section geometry could be a good alternative to the conventional tubes.

  8. Properties of concrete containing foamed concrete block waste as fine aggregate replacement

    Science.gov (United States)

    Muthusamy, K.; Budiea, A. M. A.; Zaidan, A. L. F.; Rasid, M. H.; Hazimmah, D. S.

    2017-11-01

    Environmental degradation due to excessive sand mining dumping at certain places and disposal of foamed concrete block waste from lightweight concrete producing industry are issues that should be resolved for a better and cleaner environment of the community. Thus, the main intention of this study is to investigate the potential of foamed concrete block waste as partial sand replacement in concrete production. The foamed concrete waste (FCW) used in this research that were supplied by a local lightweight concrete producing industry. The workability and compressive strength of concrete containing various percentage of foamed concrete waste as partial sand replacement has been investigated. Prior to the use, the foamed concrete waste were crushed to produce finer particles. Six concrete mixes containing various content of crushed foamed concrete waste that are 0%, 10%, 20%, 30%, 40% and 50% were used in this experimental work. Then the prepared specimens were placed in water curing until the testing age. Compressive strength test and flexural strength tests were conducted at 7, 14 and 28 days. The result shows that integration of crushed foamed concrete waste as partial sand replacement in concrete reduces the mix workability. It is interesting to note that both compressive strength and flexural strength of concrete improves when 30% crushed foamed concrete waste is added as partial sand replacement.

  9. The sugarcane defense protein SUGARWIN2 causes cell death in Colletotrichum falcatum but not in non-pathogenic fungi.

    Directory of Open Access Journals (Sweden)

    Flávia P Franco

    Full Text Available Plants respond to pathogens and insect attacks by inducing and accumulating a large set of defense-related proteins. Two homologues of a barley wound-inducible protein (BARWIN have been characterized in sugarcane, SUGARWIN1 and SUGARWIN2 (sugarcane wound-inducible proteins. Induction of SUGARWINs occurs in response to Diatraea saccharalis damage but not to pathogen infection. In addition, the protein itself does not show any effect on insect development; instead, it has antimicrobial activities toward Fusarium verticillioides, an opportunistic fungus that usually occurs after D. saccharalis borer attacks on sugarcane. In this study, we sought to evaluate the specificity of SUGARWIN2 to better understand its mechanism of action against phytopathogens and the associations between fungi and insects that affect plants. We used Colletotrichum falcatum, a fungus that causes red rot disease in sugarcane fields infested by D. saccharalis, and Ceratocystis paradoxa, which causes pineapple disease in sugarcane. We also tested whether SUGARWIN2 is able to cause cell death in Aspergillus nidulans, a fungus that does not infect sugarcane, and in the model yeast Saccharomyces cerevisiae, which is used for bioethanol production. Recombinant SUGARWIN2 altered C. falcatum morphology by increasing vacuolization, points of fractures and a leak of intracellular material, leading to germling apoptosis. In C. paradoxa, SUGARWIN2 showed increased vacuolization in hyphae but did not kill the fungi. Neither the non-pathogenic fungus A. nidulans nor the yeast S. cerevisiae was affected by recombinant SUGARWIN2, suggesting that the protein is specific to sugarcane opportunistic fungal pathogens.

  10. Selection and evaluation of reference genes for RT-qPCR expression studies on Burkholderia tropica strain Ppe8, a sugarcane-associated diazotrophic bacterium grown with different carbon sources or sugarcane juice.

    Science.gov (United States)

    da Silva, Paula Renata Alves; Vidal, Marcia Soares; de Paula Soares, Cleiton; Polese, Valéria; Simões-Araújo, Jean Luís; Baldani, José Ivo

    2016-11-01

    Among the members of the genus Burkholderia, Burkholderia tropica has the ability to fix nitrogen and promote sugarcane plant growth as well as act as a biological control agent. There is little information about how this bacterium metabolizes carbohydrates as well as those carbon sources found in the sugarcane juice that accumulates in stems during plant growth. Reverse transcription quantitative PCR (RT-qPCR) can be used to evaluate changes in gene expression during bacterial growth on different carbon sources. Here we tested the expression of six reference genes, lpxC, gyrB, recA, rpoA, rpoB, and rpoD, when cells were grown with glucose, fructose, sucrose, mannitol, aconitic acid, and sugarcane juice as carbon sources. The lpxC, gyrB, and recA were selected as the most stable reference genes based on geNorm and NormFinder software analyses. Validation of these three reference genes during strain Ppe8 growth on the same carbon sources showed that genes involved in glycogen biosynthesis (glgA, glgB, glgC) and trehalose biosynthesis (treY and treZ) were highly expressed when Ppe8 was grown in aconitic acid relative to other carbon sources, while otsA expression (trehalose biosynthesis) was reduced with all carbon sources. In addition, the expression level of the ORF_6066 (gluconolactonase) gene was reduced on sugarcane juice. The results confirmed the stability of the three selected reference genes (lpxC, gyrB, and recA) during the RT-qPCR and also their robustness by evaluating the relative expression of genes involved in glycogen and trehalose biosynthesis when strain Ppe8 was grown on different carbon sources and sugarcane juice.

  11. Radiometric relations of a sugarcane crop

    International Nuclear Information System (INIS)

    Machado, E.C.; Pereira, A.R.; Camargo, M.B.P. de; Fahl, J.I.

    1985-01-01

    The radiometric relations of a sugarcane crop, cv. NA56-79, are studied during the period of maximum leaf area index. The coefficients of reflection, transmission and absorption of the incoming solar radiation were function of solar elevation and the waveband considered. The photosynthetically active radiation was always less reflected and transmitted but more absorved than the near infrared radiation. (M.A.C.) [pt

  12. Direct saponification preparation and analysis of free and conjugated phytosterols in sugarcane (Saccharum officinarum L.) by reversed-phase high-performance liquid chromatography.

    Science.gov (United States)

    Feng, Simin; Liu, Songbai; Luo, Zisheng; Tang, Kaichen

    2015-08-15

    A simple method based on direct saponification followed by RP-HPLC analysis was developed for quantification of free and conjugated sterols in sugarcane. Acid hydrolysis prior to alkaline saponification was used to determined acylated steryl glycoside and steryl glycoside in sugarcane. The applicability and generality of this method were improved with intensive investigation. Compared to traditional solvent extraction method, this method was more time saving and appropriate for characterization of sterol fractions in sugarcane. This method was successfully applied for determination of free and conjugated sterols in different sugarcane samples. The results exhibited that stigmasterol (varied from 883.3 ± 23.5 to 1823.9 ± 24.5 μg/g dry weigh) and β-sitosterol (varied from 117.6 ± 19.9 to 801.4 ± 33.5 μg/g dry weight) were major phytosterols in the sugarcane sample, and their glycosylated forms accounted for almost 87.0% of stigmasterol and 87.5% of β-sitosterol in sugarcane, respectively. In addition, among other parts of sugarcane, tips contained the greatest amount of phytosterols. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Primary amenorrhea caused by crushing trauma of the pelvis

    NARCIS (Netherlands)

    Donner, G. G.; Pel, M.; Lammes, F. B.

    2000-01-01

    An 18-year-old woman sought treatment for primary amenorrhea. Crushing trauma of the pelvis in her childhood had caused separation between the uterine corpus and the cervix. Through a combined abdominal and vaginal approach the continuity of the uterine outflow tract was restored. Years later, after

  14. Crushing and Fracture of Lightweight Structures

    DEFF Research Database (Denmark)

    Urban, Jesper

    2003-01-01

    and Latham (1968). Good agreement between the analytical models and the experiments is found. The crushing behaviour of two high speed ferries has been analysed with the numerical and analytical methods and the results are compared with the existing regulations for high speed craft (HSC). Several failure......The overall objective of the present study has been to develop rational analytical and numerical calculation models to quantify the consequences of collision accidents. The work has primarily been focused on high speed craft (HSC) built in lightweight materials such as aluminium and sandwich...

  15. Endophytic nitrogen fixation in sugarcane: Present knowledge and future applications

    International Nuclear Information System (INIS)

    Boddey, Robert M.; Urquiaga, Segundo; Alves, Bruno J.R.; Reis, Veronica

    2001-01-01

    In Brazil the long-term continuous cultivation of sugarcane with low N fertiliser inputs, without apparent depletion of soil-N reserves, led to the suggestion that N 2 -fixing bacteria associated with the plants may be the source of agronomically significant N inputs to this crop. From the 1950s to 1970s, considerable numbers of N 2 -fixing bacteria were found to be associated with the crop, but it was not until the late 1980s that evidence from N balance and 15 N dilution experiments showed that some Brazilian varieties of sugarcane were able to obtain significant contributions from this source. The results of these studies renewed the efforts to search for N 2 -fixing bacteria, but this time the emphasis was on those diazotrophs that infected the interior of the plants. Within a few years several species of such 'endophytic diazotrophs' were discovered including Gluconacetobacter diazotrophicus, Herbaspirillum seropedicae, H. rubrisubalbicans and Burkholderia sp. Work has continued on these endophytes within sugarcane plants, but to date little success has been attained in elucidating which endophyte is responsible for the observed BNF and in what site, or sites, within the cane plants the N 2 fixation mainly occurs. Until such important questions are answered further developments or extension of this novel N 2 -fixing system to other economically important non-legumes (e.g. cereals) will be seriously hindered. As far as application of present knowledge to maximise BNF with sugarcane is concerned, molybdenum is an essential micronutrient. An abundant water supply favours high BNF inputs, and the best medium term strategy to increase BNF would appear to be based on cultivar selection on irrigated N deficient soils fertilised with Mo. (author)

  16. Sweet attraction: sugarcane pollen-associated volatiles attract gravid Anopheles arabiensis.

    Science.gov (United States)

    Wondwosen, Betelehem; Birgersson, Göran; Tekie, Habte; Torto, Baldwyn; Ignell, Rickard; Hill, Sharon R

    2018-02-21

    Anopheles arabiensis is a key vector for the transmission of human malaria in sub-Saharan Africa. Over the past 10,000 years, humans have successfully cultivated grasses and altered the landscape, creating An. arabiensis favourable environments that contain excellent habitats for both larvae and adults. Sugarcane is the most expanding agricultural system in sub-Saharan Africa, and is linked to the increased threat of malaria in rural communities. The prolific production and wind dispersal of sugarcane pollen, together with standing pools of water, often provide, as a result of irrigation, a nutrient-rich environment for the offspring of gravid malaria mosquitoes. In the present study, sugarcane pollen-associated volatiles from two cultivars are shown to attract gravid An. arabiensis in a still air two-port olfactometer and stimulate egg laying in an oviposition bioassay. Through combined gas chromatography and electroantennographic detection, as well as combined gas chromatography and mass spectrometric analyses, we identified the bioactive volatiles and generated a synthetic blend that reproduced the full behavioural repertoire of gravid mosquitoes in the Y-tube assay. Two subtractive odour blends, when compared with the full blend, were significantly more attractive. These three and four-component subtractive blends share the compounds (1R)-(+)-α-pinene, nonanal and benzaldehyde, of which, (1R)-(+)-α-pinene and nonanal are found in the attractive odour blends from rice plants and maize pollen. In pairwise comparisons, the rice synthetic odour blend was more attractive to gravid mosquitoes than either of the pollen blends, whereas the pollen blends did not differ in attraction. The attraction of gravid females to sugarcane pollen volatiles demonstrated in this study, together with the previously found grass-associated volatiles, raise the potential of developing a bioactive chimeric blend to attract gravid malaria mosquitoes. This is discussed in relation to

  17. Submarine sand ridges and sand waves in the eastern part of the China Sea

    Science.gov (United States)

    Wu, Ziyin; Li, Shoujun; Shang, Jihong; Zhou, Jieqiong; Zhao, Dineng; Liang, Yuyang

    2016-04-01

    Integrated with multi-beam and single-beam echo sounding data, as well as historical bathymetric data, submarine bathymetric maps of the eastern part of the China Sea, including the Bohai Sea, Huanghai Sea, and East China Sea, are constructed to systematically study submarine sand ridges and sand waves in the eastern part of the China Sea, combined with high-resolution seismic, sub-bottom profile and borehole data. Submarine sand ridges are extraordinarily developed in the eastern part of the China Sea, and 7 sand ridge areas can be divided from north to south, that is, the Laotieshan Channel sand ridge area in the Bohai Sea, the Korea Bay sand ridge area in the southern Huanghai Sea, the sand ridge area in the eastern Huanghai islands and the Huanghai Troughs, the Jianggang sand ridge area in the western Huanghai Sea, the sand ridge area in the East China Sea shelf, and the sand ridge and sand wave area in the Taiwan Strait and Taiwan Banks. The distribution area of the sand ridges and sand waves covers more than 450,000 km2, wherein ~10,000 km2 in the Bohai Bay, ~200,000 km2 in the Huanghai Sea, ~200,000 km2 in the East China Sea shelf, and ~40,000 km2 in the Taiwan Strait and Taiwan Banks, respectively. The great mass of sand ridges are distributed within water depth of 5-160 m, with a total length of over 160 km and a main width of 5-10 km. The inner structure of the sand ridges presents features of high-angle inclined beddings, with main lithology of sands, sand-mud alternations partly visible, and a small number of mud cores. Dating results indicate that the sand ridges in the eastern part of the China Sea are mainly developed in the Holocene. Sea-level variation dominates the sand ridge evolution in the eastern part of the China Sea since the LGM, and the sand ridges developed in the area of < 60m water depth are appeared in bad activity, meanwhile sand ridges with good activity are still developed in large scale.

  18. Highly Organic Soil Stabilization by Using Sugarcane Bagasse Ash (SCBA

    Directory of Open Access Journals (Sweden)

    Abu Talib Mohd Khaidir

    2017-01-01

    Full Text Available The study objective is to develop alternative binders that are environment friendly by utilizing sugarcane bagasse ash (SCBA in the organic soil stabilization. Together with SCBA, Ordinary Portland Cement (OPC, calcium chloride (CaCl2 and silica sand (K7 were used as additives to stabilize the peat. In obtaining the optimal mix design, specimens of stabilized peat were tested in unconfined compression. It was found that stabilized peat comprising 20% and 5% (PCB1-20 and PCB2-5 partial replacement of OPC with SCBA 1 and SCBA 2 attain the maximum unconfined compressive strength (UCS and discovered greater than UCS of peat-cement (PC specimen. At the optimal mix design, the UCS of the stabilized peat specimens increased with increasing of curing time, preloading rate, OPC and K7 dosage. For PCB1-20 mixture, inclusion of a minimum OPC of 300kg/m3 and K7 of 500kg/m3 along with curing under 20kPa pressure is recommendable for the peat stabilization to be effective. However for PCB2-5, it suggested to use more OPC and K7 dosage or alternatively increase the preloading during curing to 40kPa in order to achieve target UCS. It can be concluded that SCBA 1 has better quality than SCBA 2 in peat stabilization especially the contribution made by its fine particle size.

  19. Extraction optimization by response surface methodology: Purification and characterization of phytosterol from sugarcane (Saccharum officinarum L.) rind.

    Science.gov (United States)

    Feng, Simin; Luo, Zisheng; Zhong, Zhou; Jiang, Lei; Tang, Kaichen

    2014-06-01

    A green, simple, and effective method for the extraction of sugarcane lipids from sugarcane rind was investigated by response surface methodology. The optimum conditions of technological progress obtained through response surface methodology were as follows: liquid-to-solid ratio 7.94: 1 mL/g, extraction temperature 50°C and extraction time 5.98 h. The practical sugarcane lipids extraction yield was 6.55 ± 0.28%, which was in good consistence with the predicted extraction yield of 6.47%. The results showed that the sugarcane lipids extraction yield obtained in optimum conditions increased by 1.16∼7.28-fold compared to the yields obtained in single-factor experiments. After saponification and SPE steps, the nonsaponifiable fraction of sugarcane lipids was analyzed by gas chromatography with mass spectrometry and high-performance liquid chromatography. β-Sitosterol, stigmasterol, and campesterol were the prevailing phytosterols in the sample, while fucosterol, gramisterol, stigmast-7-en-3-ol, (3β,5α,24S)-, stigmasta-4,6,22-trien-3α-ol, and cholest-8(14)-en-3β-ol acetate were also identified as minor steroids. Furthermore, the content of β-sitosterol and a mixture of campesterol and stigmasterol (quantified by high-performance liquid chromatography) was 44.18 mg/100 g dry weight and 43.20 mg stigmasterol/100 g dry weight, respectively. Our results indicate that sugarcane rind is a good source of phytosterol. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. [Frontier, sugarcane and trafficking: slavery, disease and death in Capivari, São Paulo, 1821-1869].

    Science.gov (United States)

    Lima, Carlos A M

    2015-01-01

    The deaths and diseases of slaves in the São Paulo State sugarcane municipality of Capivari are addressed, associating the causes attributed to these deaths to the social and economic context and characteristics of the local slave communities. The impact of malaria, relating it to the age brackets, the environment created by work on the sugarcane plantations and the evolution of the occupation of the area, initially by expanding frontiers, is emphasized. The relationship between illness and work processes, as well as the post-disembarkation mortality of Africans and the possibility of mortality crises among the sugarcane captives is explored. The results lead to a discussion of the impact of habitat and Atlantic displacement and the difficulty in acclimatizing.

  1. Assessment of Cane Yields on Well-drained Ferralsols in the Sugar-cane Estate of Central Cameroon

    Directory of Open Access Journals (Sweden)

    Van Ranst, E.

    1999-01-01

    Full Text Available The potential yields of irrigated and of rainfed sugar-cane on three ferrallitic soil series, well represented in the Nkoteng sugar-cane estate of Central Cameroon, are estimated following different methods. The potential yield of irrigated sugar-cane is estimated from the total maximum evapotranspiration during the crop cycle. The potential yield of rainfed sugar-cane is estimated following two methods for the establishment of a water balance and for the determination of a yield reduction as a result of a water deficit. The calculated potential yields are higher than the observed ones. The yield reduction due to rain fed cropping can mainly be attributed to water shortage during the late yield formation and the ripening periods. A supplementary yield decline is due to a combined action of an acid soil reaction, a possible Al-toxicity a low base saturation, an inadequate CEC, organic matter content and P-availability which may adequately explain the actual yield level.

  2. Inheritance of resistance to orange rust in sugarcane

    Science.gov (United States)

    Orange rust, caused by Puccinia kuehnii, is an economically important disease in the Florida sugarcane industry. In this study, orange rust reactions of seedlings in progenies originating from 12 crosses between female and male parents with differing resistance to orange rust (three of each categor...

  3. Cryptanalysis of an Iterated Halving-based hash function: CRUSH

    DEFF Research Database (Denmark)

    Bagheri, Nasour; Henricksen, Matt; Knudsen, Lars Ramkilde

    2009-01-01

    Iterated Halving has been suggested as a replacement to the Merkle–Damgård (MD) construction in 2004 anticipating the attacks on the MDx family of hash functions. The CRUSH hash function provides a specific instantiation of the block cipher for Iterated Halving. The authors identify structural pr...

  4. Salt stress induces changes in the proteomic profile of micropropagated sugarcane shoots

    Science.gov (United States)

    Reis, Ricardo S.; Heringer, Angelo S.; Rangel, Patricia L.; Santa-Catarina, Claudete; Grativol, Clícia; Veiga, Carlos F. M.; Souza-Filho, Gonçalo A.

    2017-01-01

    Salt stress is one of the most common stresses in agricultural regions worldwide. In particular, sugarcane is affected by salt stress conditions, and no sugarcane cultivar presently show high productivity accompanied by a tolerance to salt stress. Proteomic analysis allows elucidation of the important pathways involved in responses to various abiotic stresses at the biochemical and molecular levels. Thus, this study aimed to analyse the proteomic effects of salt stress in micropropagated shoots of two sugarcane cultivars (CB38-22 and RB855536) using a label-free proteomic approach. The mass spectrometry proteomics data are available via ProteomeXchange with identifier PXD006075. The RB855536 cultivar is more tolerant to salt stress than CB38-22. A quantitative label-free shotgun proteomic analysis identified 1172 non-redundant proteins, and 1160 of these were observed in both cultivars in the presence or absence of NaCl. Compared with CB38-22, the RB855536 cultivar showed a greater abundance of proteins involved in non-enzymatic antioxidant mechanisms, ion transport, and photosynthesis. Some proteins, such as calcium-dependent protein kinase, photosystem I, phospholipase D, and glyceraldehyde-3-phosphate dehydrogenase, were more abundant in the RB855536 cultivar under salt stress. Our results provide new insights into the response of sugarcane to salt stress, and the changes in the abundance of these proteins might be important for the acquisition of ionic and osmotic homeostasis during exposure to salt stress. PMID:28419154

  5. Assessing the Likelihood of Gene Flow From Sugarcane (Saccharum Hybrids to Wild Relatives in South Africa

    Directory of Open Access Journals (Sweden)

    Sandy J. Snyman

    2018-06-01

    Full Text Available Pre-commercialization studies on environmental biosafety of genetically modified (GM crops are necessary to evaluate the potential for sexual hybridization with related plant species that occur in the release area. The aim of the study was a preliminary assessment of factors that may contribute to gene flow from sugarcane (Saccharum hybrids to indigenous relatives in the sugarcane production regions of Mpumalanga and KwaZulu-Natal provinces, South Africa. In the first instance, an assessment of Saccharum wild relatives was conducted based on existing phylogenies and literature surveys. The prevalence, spatial overlap, proximity, distribution potential, and flowering times of wild relatives in sugarcane production regions based on the above, and on herbaria records and field surveys were conducted for Imperata, Sorghum, Cleistachne, and Miscanthidium species. Eleven species were selected for spatial analyses based on their presence within the sugarcane cultivation region: four species in the Saccharinae and seven in the Sorghinae. Secondly, fragments of the nuclear internal transcribed spacer (ITS regions of the 5.8s ribosomal gene and two chloroplast genes, ribulose-bisphosphate carboxylase (rbcL, and maturase K (matK were sequenced or assembled from short read data to confirm relatedness between Saccharum hybrids and its wild relatives. Phylogenetic analyses of the ITS cassette showed that the closest wild relative species to commercial sugarcane were Miscanthidium capense, Miscanthidium junceum, and Narenga porphyrocoma. Sorghum was found to be more distantly related to Saccharum than previously described. Based on the phylogeny described in our study, the only species to highlight in terms of evolutionary divergence times from Saccharum are those within the genus Miscanthidium, most especially M. capense, and M. junceum which are only 3 million years divergent from Saccharum. Field assessment of pollen viability of 13 commercial sugarcane

  6. Assessing the Likelihood of Gene Flow From Sugarcane (Saccharum Hybrids) to Wild Relatives in South Africa

    Science.gov (United States)

    Snyman, Sandy J.; Komape, Dennis M.; Khanyi, Hlobisile; van den Berg, Johnnie; Cilliers, Dirk; Lloyd Evans, Dyfed; Barnard, Sandra; Siebert, Stefan J.

    2018-01-01

    Pre-commercialization studies on environmental biosafety of genetically modified (GM) crops are necessary to evaluate the potential for sexual hybridization with related plant species that occur in the release area. The aim of the study was a preliminary assessment of factors that may contribute to gene flow from sugarcane (Saccharum hybrids) to indigenous relatives in the sugarcane production regions of Mpumalanga and KwaZulu-Natal provinces, South Africa. In the first instance, an assessment of Saccharum wild relatives was conducted based on existing phylogenies and literature surveys. The prevalence, spatial overlap, proximity, distribution potential, and flowering times of wild relatives in sugarcane production regions based on the above, and on herbaria records and field surveys were conducted for Imperata, Sorghum, Cleistachne, and Miscanthidium species. Eleven species were selected for spatial analyses based on their presence within the sugarcane cultivation region: four species in the Saccharinae and seven in the Sorghinae. Secondly, fragments of the nuclear internal transcribed spacer (ITS) regions of the 5.8s ribosomal gene and two chloroplast genes, ribulose-bisphosphate carboxylase (rbcL), and maturase K (matK) were sequenced or assembled from short read data to confirm relatedness between Saccharum hybrids and its wild relatives. Phylogenetic analyses of the ITS cassette showed that the closest wild relative species to commercial sugarcane were Miscanthidium capense, Miscanthidium junceum, and Narenga porphyrocoma. Sorghum was found to be more distantly related to Saccharum than previously described. Based on the phylogeny described in our study, the only species to highlight in terms of evolutionary divergence times from Saccharum are those within the genus Miscanthidium, most especially M. capense, and M. junceum which are only 3 million years divergent from Saccharum. Field assessment of pollen viability of 13 commercial sugarcane cultivars using

  7. The percentage of macrophage numbers in rat model of sciatic nerve crush injury

    Directory of Open Access Journals (Sweden)

    Satrio Wicaksono

    2016-02-01

    Full Text Available ABSTRACT Excessive accumulation of macrophages in sciatic nerve fascicles inhibits regeneration of peripheral nerves. The aim of this study is to determine the percentage of the macrophages inside and outside of the fascicles at the proximal, at the site of injury and at the distal segment of rat model of sciatic nerve crush injury. Thirty male 3 months age Wistar rats of 200-230 g were divided into sham-operation group and crush injury group. Termination was performed on day 3, 7, and 14 after crush injury. Immunohistochemical examination was done using anti CD68 antibody. Counting of immunopositive and immunonegative cells was done on three representative fields for extrafascicular and intrafascicular area of proximal, injury and distal segments. The data was presented as percentage of immunopositive cells. The percentage of the macrophages was significantly increased in crush injury group compared to the sham-operated group in all segments of the peripheral nerves. While the percentage of macrophages outside fascicle in all segments of sciatic nerve and within the fascicle in the proximal segment reached its peak on day 3, the percentage of macrophages within the fascicles at the site of injury and distal segments reached the peak later at day 7. In conclusions, accumulation of macrophages outside the nerve fascicles occurs at the beginning of the injury, and then followed later by the accumulation of macrophages within nerve fascicles

  8. Sugarcane biochar as an amendment for greenhouse growing media for the production of cucurbit seedlings

    Science.gov (United States)

    Louisiana sugarcane farmers in 2016 harvested 11.7 million mt millable sugarcane from 163,000 ha, producing 1.47 million mg of raw sugar and an estimated 3.5 million mt of bagasse. Even though Louisiana sugar mills use 80 to 90% of the bagasse for fuel production, another 350,000 to 700,000 mt of ba...

  9. Surface runoff generation in a small watershed covered by sugarcane and riparian forest

    Directory of Open Access Journals (Sweden)

    Rafael Pires Fernandes

    2013-12-01

    Full Text Available Since an understanding of how runoff is generated is of great importance to soil conservation, to water availability and to the management of a watershed, the objective of this study was to understand the generation of surface runoff in a watershed covered by sugarcane and riparian forest. Nine surface runoff plots were set up, evenly distributed on the lower, middle and upper slopes. The lower portion was covered by riparian forest. We showed that the average surface runoff coefficient along the slope in the present study was higher than in other studies under different land uses. Furthermore, the surface runoff was higher under sugarcane compared to the riparian forest, especially after sugarcane harvesting. Besides land cover, other factors such as the characteristics of rainfall events, relief and physical soil characteristics such as soil bulk density and saturated hydraulic conductivity influenced the surface runoff generation.

  10. Comparison of Microwave and Ozonolysis Effect as Pretreatment on Sugarcane Bagasse Enzymatic Hydrolysis

    Directory of Open Access Journals (Sweden)

    N Eqra

    2015-03-01

    Full Text Available Bioethanol production from agricultural residues is one of the promising methods. Pretreatment is the most important step in this type of bioethanol production. In this study, the saccharification percentage of sugarcane bagasse was investigated after two types of pretreatments including ozone steaming and microwave. Microwave pretreatment was studied with two factors of microwave radiation (170, 450, and 850 w and microwave duration (2, 6, and 10 min. The ozonolysis (ozone steaming pretreatment was surveyed with two factors of moisture content of bagasse (30, 40, and 50% and ozonolysis time (1.5, 2.5, 3.5, and 4.5 hr. After hydrolysis, the Saccharification percentage of sugarcane bagasse increased to 57.2% and 67.06% with microwave and ozonolysis pretreatments, respectively; compare to 20.85% in non-ozonated bagasse. It can be concluded that the ozonolysis is the most effective pretreatment regarding to saccharification percentage of sugarcane bagasse.

  11. Sugarcane bagasse as exclusive roughage for dairy cows in smallholder livestock system

    Directory of Open Access Journals (Sweden)

    Gleidiana Amélia Pontes de Almeida

    2018-03-01

    Full Text Available Objective The study aimed to evaluate sugarcane bagasse as roughage in lactating cow on feed intake, digestibility, ingestive behavior, milk production and composition, and microbial protein synthesis. Methods Ten Girolando cows at initial body weight of 450±25.6 kg and at 143.7±30.7 days in milk were assigned in two 5×5 Latin square designs. Five 21-day experimental periods were adopted (1° to 14-day: diets adaptation period; 15° to 21-day: data collection and sampling period. The diets consisted of four different levels of sugarcane bagasse (45%, 50%, 55%, and 60% and a control diet, commonly adopted in the region, based on spineless cactus (25% sugarcane bagasse, formulated to meet 12 kg/d milk yield. Results The dry matter (DM, organic matter (OM, and total digestible nutrients intakes and DM and OM digestibilities observed for 45% and 50% bagasse inclusion were similar to control diet, while that 55% and 60% bagasse inclusion were lower. Cows fed control diet, and bagasse diets of 45%, and 50% levels had the nutritional requirements attended, that guaranteed 12 kg/d of milk yield. The crude protein intake and digestibility of cows fed 45%, 50%, and 55% of bagasse inclusion were similar to control diet. The neutral detergent fiber (NDF intake and digestibility differ for all bagasse diets related to control diet, while the non-fiber carbohydrates intake and digestibility for cows fed 45% of bagasse were similar for control diet. The intakes and digestibilities of nutrients decreased linearly in function of bagasse inclusion; NDF and indigestible NDF intakes did not vary. The ruminating time, feeding and rumination efficiency, microbial protein synthesis and milk yield decreased linearly with sugarcane bagasse inclusion. Conclusion Sugarcane bagasse decreases milk production; however, its inclusion level in between 45% to 50% associated to concentrate could replace diets based on spineless cactus for crossbred dairy cow's producing 12 kg

  12. Sugarcane bagasse as exclusive roughage for dairy cows in smallholder livestock system.

    Science.gov (United States)

    de Almeida, Gleidiana Amélia Pontes; de Andrade Ferreira, Marcelo; de Lima Silva, Janaina; Chagas, Juana Catarina Cariri; Véras, Antônia Sherlânea Chaves; de Barros, Leonardo José Assis; de Almeida, Gledson Luiz Pontes

    2018-03-01

    The study aimed to evaluate sugarcane bagasse as roughage in lactating cow on feed intake, digestibility, ingestive behavior, milk production and composition, and microbial protein synthesis. Ten Girolando cows at initial body weight of 450±25.6 kg and at 143.7±30.7 days in milk were assigned in two 5×5 Latin square designs. Five 21-day experimental periods were adopted (1° to 14-day: diets adaptation period; 15° to 21-day: data collection and sampling period). The diets consisted of four different levels of sugarcane bagasse (45%, 50%, 55%, and 60%) and a control diet, commonly adopted in the region, based on spineless cactus (25% sugarcane bagasse), formulated to meet 12 kg/d milk yield. The dry matter (DM), organic matter (OM), and total digestible nutrients intakes and DM and OM digestibilities observed for 45% and 50% bagasse inclusion were similar to control diet, while that 55% and 60% bagasse inclusion were lower. Cows fed control diet, and bagasse diets of 45%, and 50% levels had the nutritional requirements attended, that guaranteed 12 kg/d of milk yield. The crude protein intake and digestibility of cows fed 45%, 50%, and 55% of bagasse inclusion were similar to control diet. The neutral detergent fiber (NDF) intake and digestibility differ for all bagasse diets related to control diet, while the non-fiber carbohydrates intake and digestibility for cows fed 45% of bagasse were similar for control diet. The intakes and digestibilities of nutrients decreased linearly in function of bagasse inclusion; NDF and indigestible NDF intakes did not vary. The ruminating time, feeding and rumination efficiency, microbial protein synthesis and milk yield decreased linearly with sugarcane bagasse inclusion. Sugarcane bagasse decreases milk production; however, its inclusion level in between 45% to 50% associated to concentrate could replace diets based on spineless cactus for crossbred dairy cow's producing 12 kg/d of milk.

  13. Nitrous oxide emission factors from N-fertilizer in sugarcane production in Brazil

    Science.gov (United States)

    Galdos, M. V.; Siqueira Neto, M.; Feigl, B. J.; Carvalho, J. L.; Cerri, C. E.; Cerri, C. C.

    2013-12-01

    The Brazilian sugarcane production is rapidly expanding due to the increase of global demand for ethanol. Concurrently the necessary inputs to culture, especially N-fertilizer, are growing, since N is one of the key element to maintain sugarcane productivity. However, it is known that N-fertilizer is responsible for the largest share of N2O emissions from agricultural soils. The Intergovernmental Panel on Climate Changes (IPCC) estimated that under favorable climatic conditions approximately 1% of the N-fertilizer applied can be emitted as N2O. Our goal was to estimate N2O emission factors from N-fertilizer used in the sugarcane ratoon for ethanol production. A field study was conducted at the Capuava Mill, located in southeastern Brazil. The experimental design was completely randomized, with four replications in a factorial scheme (2 x 2): two N sources (urea and ammonium nitrate), two application rates (80 and 120 kg ha-1), and a control treatment. N2O concentrations were determined by gas chromatography using a Shimadzu© GC-mini. N2O fluxes were calculated from linear regressions of concentration versus incubation time in the soil static chambers. The N2O emission factor of N-fertilizer was calculated according to the methodology described in the Guidelines for National Greenhouse Gas Inventories (IPCC). Comparatively, ammonium nitrate emitted 45 to 75% less N2O than urea application. There was no significant difference in N2O emission between the two applied rates of urea. Also the N2O emission factor of ammonium nitrate (0.3×0.2%) was lower than that of urea (1.1×0.4%). Our results indicated that on average the N fertilization of sugarcane plantation has an emission factor of 0.7×0.5% suggesting that N-fertilizer management can be used to reduce greenhouse gas emissions in order to improve the sustainability of bioethanol from sugarcane.

  14. Assessment of genetic diversity among sugarcane cultivars using ...

    African Journals Online (AJOL)

    Genetic diversity based on the characterization of genetic makeup, using molecular markers is of utmost importance for breeders in crop improvement programme. A total of 26 microsatellite primers were used to determine the genetic diversity among 40 sugarcane genotypes including their parents. The polymerase chain ...

  15. Fontainebleau Sand

    DEFF Research Database (Denmark)

    Leth, Caspar Thrane

    2006-01-01

    The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand.......The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand....

  16. Ionizing Radiation Conversion of Lignocellulosic Biomass from Sugarcane Bagasse to Production Ethanol Biofuel

    International Nuclear Information System (INIS)

    Duarte, C.L.; Mori, M.N.; Oikawa, H.; Finguerut, J.; Galvão, A.; Nagatomi, H.R.; Célia, M.

    2010-01-01

    Sugarcane bagasse has been considered as a substrate for single cell protein, animal feed, and renewable energy production. Sugarcane bagasse generally contain up to 45% glucose polymer cellulose, 40% hemicelluloses, and 20% lignin. Pure cellulose is readily depolymerised by radiation, but in biomass, the cellulose is intimately bonded with lignin, that protect it from radiation effects. The objective of this study is the evaluation of the electron beam irradiation as a pre-treatment to enzymatic hydrolysis of cellulose in order to facilitate its fermentation and improves the production of ethanol biofuel. Samples of sugarcane bagasse were obtained in sugar/ethanol Iracema Mill sited in Piracicaba, Brazil, and were irradiated using Radiation Dynamics Electron Beam Accelerator with 1.5 MeV energy and 37kW, in batch systems. The applied absorbed doses of the fist sampling, Bagasse A, were 20 kGy, 50 kGy, 100 kGy and 200 kGy. After the evaluation the preliminary obtained results, it was applied lower absorbed doses in the second assay: 5 kGy, 10 kGy, 20 kGy, 30 kGy, 50 kGy, 70 kGy, 100 kGy and 150 kGy. The electron beam processing took to changes in the sugarcane bagasse structure and composition, lignin and cellulose cleavage. The yield of enzymatic hydrolyzes of cellulose increase about 75 % with 30 kGy of absorbed dose. (author)

  17. Qualitative parameters of sugarcane silages treated with urea and calcium oxide

    Directory of Open Access Journals (Sweden)

    Susi Cristina dos Santos Guimarães Martins

    2015-04-01

    Full Text Available The objective was to evaluate the fermentation parameters, chemical composition and fractionation of carbohydrates of sugarcane silages treated with urea and calcium oxide (CaO. Upon ensiling, the treatments applied to the sugarcane were: 1% urea; 0.5% urea + 0.5% CaO; and 1% CaO, in relation to a control silage, without additive. The chemical additives (urea and CaO were added at ensiling, in an amount calculated based on the fresh matter (as is. A completely randomized design consisting of four treatments (silages and nine replicates was adopted. The material was conditioned in PVC mini-silos for five months. At the end of the storage period, silos were weighed again and samples were collected to quantify the losses caused by fermentation, dry matter recovery, pH, and ammonia nitrogen (N-NH3 of the silages and to evaluate the chemical composition and fractionation of carbohydrates. The silage with 1% CaO showed the highest recovery of dry matter, and in terms of carbohydrate fractionation, it showed the highest levels of soluble and potentially soluble carbohydrates. Addition of 1% CaO during ensiling reduces the fermentation losses of sugarcane silages.

  18. Spittlebug impacts on sugarcane quality and ethanol production

    Directory of Open Access Journals (Sweden)

    Gisele Cristina Ravaneli

    2011-02-01

    Full Text Available The objective of this work was to evaluate the impacts of spittlebug (Mahanarva fimbriolata attack on sugarcane quality and ethanol production. Technological and microbiological parameters of juice and fermentation process were evaluated in ten fermentation cycles and two harvest seasons. Treatments consisted of different spittlebug stalk damage levels: control, with 100% of apparently healthy stalks; medium, with 15% of damaged or dry stalks (DDS; high, with 30% of DDS; and very high, with 60% of DDS. Spittlebug attack caused significant losses in cane quality, reducing total soluble solids, sucrose content, total reducing sugars, and pH, and increasing total phenolic compounds, and total and volatile juice acidity. The fermentation process was also significantly affected, resulting in lower ethanol content in wine. There was an increase in acetaldehyde concentration in the distillate. The spittlebug attack caused negative impacts on sugarcane quality and fermentation process, and these impacts are stronger in late season harvests.

  19. SOCIAL AND ENVIRONMENTAL IMPACTS OF THE SUGARCANE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Luciana Oranges Cezarino

    2012-06-01

    Full Text Available Currently, the concern about the environmental degradation and the conditions of life of our planet has increased. An alarm literally sounded relating the environmental problems and the uncertainties of the future. An energy revolution is necessary in face of the climate changes. Nature offers numerous possibilities of energy production and Brazil is in a great position in this scenario. It is the greatest producer, consumer and exporter of ethanol. Analyzing the Brazilian sugarcane industry, it is easy to recognize its historical and economic importance. More than ever, this industry has shown environmental solutions with changes in the energy matrix using ethanol as renewable fuel. It is essential to have the industry development in balance with social and environmental values. Thus, the first step to expand this sector would be to identify the social and environmental impacts of the sugarcane industry. Public policies are also acting on the sector and have a prominent role in the scenario.

  20. Qualitative and Quantitative Features Evaluation of Two Methods of Sugarcane Harvesting (with aim of Energy and Sugar Production

    Directory of Open Access Journals (Sweden)

    K Andekaeizadeh

    2018-03-01

    Full Text Available Introduction Sugarcane is an important plant in the world that cultivate for the production of sugar and energy. For this purpose, evaluation of Sugarcane (SC and Energycane (EC methods is necessary. Energy is vital for economic and social development and the demand for it is rising. The international community look toward alternative to fossil fuels is the aim of using liquid fuel derived from agricultural resources. According to calculations, about 47% from renewable energy sources in Brazil comes from sugarcane so as, the country is known the second largest source of renewable energy. Sugarcane in Brazil provides about 17.5% of primary energy sources. Material such as bagasse and ethanol are derived from sugarcane that provide 4.2% and 11.2 % consumed energy, respectively . In developing countries, the use of this product increase in order to achieve self-sufficiency in the production of starch and sugar and thus independence in bioethanol production. Evaluation of energy consumption in manufacturing systems, show the measurement method of yield conversion to the amount of energy. Many of products of Sugarcane have ability to produce bioenergy. Many materials obtain from sugarcane such as, cellulosic ethanol, biofuels and other chemical materials. Hence, Energycane is introduced as a new method of sugarcane harvesting. But, one of the problems of this method is high cost and high energy consumption of harvester. So that the total cost of Energycane method is 38.4 percent of production total costs, whereas, this cost, in Sugarcane method is 5.32 percent of production total costs. In a study that was conducted by Matanker et al (2014 with title “Power requirements and field performance in harvesting EC and SC”, the power requirements of some components of sugarcane harvester and its field capacity, in Sugarcane and Energycane methods were examined. The consumed power by basecutter, elevator and chopper was measured in terms of Mega grams

  1. Sucrose and color profiles in sugarcane (Saccharum sp.) juice analyzed by UFLC-ELSD and Synapt High-Definition Mass Spectrometry during radiation treatment

    Science.gov (United States)

    Lima, Roberta B.; de Aguiar, Claudio Lima; Galaverna, Renan; Baptista, Antonio S.; Eberlin, Marcos N.; Arthur, Valter

    2016-04-01

    This work evaluated the effect of electron beam irradiation (E-beam) on sugarcane juice and compared the results with preliminary tests performed on sugarcane juice treated with gamma irradiation. The samples were irradiated at 5, 10 and 20 kGy doses and results were compared wile control samples without irradiation. The results showed a significant increase (p≤0.05) of phenolic compounds in both treatments. We also observed increased contents of reducing sugars (glucose and fructose) for the samples irradiated with gamma rays and E-beam measured by the DNS methods. However, there was no significant difference of sugars content measured by chromatographic analyses performed in the sugarcane juice treated with E-beam. Therefore reducing sugars content could be overestimated by the DNS method because salts in sugarcane juice. The treatments were able to reduce sugarcane juice ICUMSA color intensity in both treatments with irradiation. E-beam reduced sugarcane juice color by roughly 49% compared the control, while gamma irradiation reduced it by 30%.

  2. As-pyrolyzed sugarcane bagasse possessing exotic field emission properties

    Science.gov (United States)

    Krishnia, Lucky; Yadav, Brajesh S.; Palnitkar, Umesh; Satyam, P. V.; Gupta, Bipin Kumar; Koratkar, Nikhil A.; Tyagi, Pawan K.

    2018-06-01

    The present study aims to demonstrate the application of sugarcane bagasse as an excellent field emitter. Field emission property of as-pyrolyzed sugarcane bagasse (p-SBg) before and after the plasma treatment has been investigated. It has been observed that electronic nature of p-SBg transformed from semiconducting to metallic after plasma treatment. Maximum current and turn-on field defined at 10 μA/cm2 was found to be 800 μA/cm2 and 2.2 V/μm for as-pyrolyzed sugarcane bagasse (p-SBg) and 25 μA/cm2 and 8.4 V/μm for H2-plasma treated p-SBg. These values are found to be better than the reported values for graphene and activated carbon. In this report, pyrolysis of bagasse has been carried in a thermal chemical vapor deposition (Th-CVD) system in inert argon atmosphere. Scanning electron microscopy (SEM), X-ray Diffraction (XRD), High-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) have been used to study the structure of both pre and post plasma-treated p-SBg bagasse's sample. HRTEM study reveals that carbonaceous structures such as 3D-nanographene oxide (3D-NGO), graphite nanodots (GNDs), carbon nanotubes (CNTs), and carbon onions are present in both pre-treated and plasma-treated p-SBg. Hence, we envision that the performed study will be a forwarding step to facilitate the application of p-SBg in display devices.

  3. Kinetics of thermophilic acidogenesis of typical Brazilian sugarcane vinasse

    International Nuclear Information System (INIS)

    Koyama, Mirian Harumi; Araújo Júnior, Moacir Messias; Zaiat, Marcelo

    2016-01-01

    The kinetics of the acidogenic phase during anaerobic digestion of sugarcane vinasse in differential reactors containing immobilized cells was investigated. The maximum substrate conversion rate (r_m_a_x), substrate saturation constant (K_s) and constant of inhibition by excess substrate (K_i_s) were determined using vinasse with and without pH adjustment. Simulation and scaling-up of a thermophilic-hydrogen production system were performed. The r_m_a_x values obtained at different pH were similar and near 0.9 mg-Total carbohydrates g-VS"−"1 h"−"1. The K_s obtained from the system without pH adjustment was 10,762.3 mg-Total carbohydrates L"−"1 (i.e., 2.5 times higher than the system with pH adjustment). No inhibition by excess substrate was achieved in the system without pH adjustment, indicating that sugarcane vinasse can be used to produce hydrogen without input costs. The simulation revealed that hydrogen production is a sensitive process that requires careful balancing of various operational parameters. The payback for the investment in system implementation is 4.4 years. - Highlights: • Sugarcane vinasse can be used to produce hydrogen without pH adjustment. • Excess substrate inhibition was observed when vinasse with pH adjusted was used. • A careful balancing of operational conditions is required to produce hydrogen. • The payback for the investment in system implementation is four years.

  4. Life-cycle greenhouse gas emissions and energy balances of sugarcane ethanol production in Mexico

    International Nuclear Information System (INIS)

    Garcia, Carlos A.; Fuentes, Alfredo; Hennecke, Anna; Riegelhaupt, Enrique; Manzini, Fabio; Masera, Omar

    2011-01-01

    The purpose of this work was to estimate GHG emissions and energy balances for the future expansion of sugarcane ethanol fuel production in Mexico with one current and four possible future modalities. We used the life cycle methodology that is recommended by the European Renewable Energy Directive (RED), which distinguished the following five system phases: direct Land Use Change (LUC); crop production; biomass transport to industry; industrial processing; and ethanol transport to admixture plants. Key variables affecting total GHG emissions and fossil energy used in ethanol production were LUC emissions, crop fertilization rates, the proportion of sugarcane areas that are burned to facilitate harvest, fossil fuels used in the industrial phase, and the method for allocation of emissions to co-products. The lower emissions and higher energy ratios that were observed in the present Brazilian case were mainly due to the lesser amount of fertilizers applied, also were due to the shorter distance of sugarcane transport, and to the smaller proportion of sugarcane areas that were burned to facilitate manual harvest. The resulting modality with the lowest emissions of equivalent carbon dioxide (CO 2e ) was ethanol produced from direct juice and generating surplus electricity with 36.8 kgCO 2e /GJ ethanol . This was achieved using bagasse as the only fuel source to satisfy industrial phase needs for electricity and steam. Mexican emissions were higher than those calculated for Brazil (27.5 kgCO 2e /GJ ethanol ) among all modalities. The Mexican modality with the highest ratio of renewable/fossil energy was also ethanol from sugarcane juice generating surplus electricity with 4.8 GJ ethanol /GJ fossil .

  5. Transportation and Production Lot-size for Sugarcane under Uncertainty of Machine Capacity

    Directory of Open Access Journals (Sweden)

    Sudtachat Kanchala

    2018-01-01

    Full Text Available The integrated transportation and production lot size problems is important effect to total cost of operation system for sugar factories. In this research, we formulate a mathematic model that combines these two problems as two stage stochastic programming model. In the first stage, we determine the lot size of transportation problem and allocate a fixed number of vehicles to transport sugarcane to the mill factory. Moreover, we consider an uncertainty of machine (mill capacities. After machine (mill capacities realized, in the second stage we determine the production lot size and make decision to hold units of sugarcane in front of mills based on discrete random variables of machine (mill capacities. We investigate the model using a small size problem. The results show that the optimal solutions try to choose closest fields and lower holding cost per unit (at fields to transport sugarcane to mill factory. We show the results of comparison of our model and the worst case model (full capacity. The results show that our model provides better efficiency than the results of the worst case model.

  6. Reproducible in vitro regeneration system for purifying sugarcane ...

    African Journals Online (AJOL)

    This procedure may be considered as one of the best ever published report on regeneration from in vitro grown plants to purify clones without subjecting the plants to field conditions and harvesting the mature cane. This technique was used to purify transgenic sugarcane plants carrying Bacillus thuringiensis gene.

  7. suitability of burnt and crushed cow bones as partial replacement

    African Journals Online (AJOL)

    HOD

    3 mix ratio measuring 150x150x150mm were tested for the compressive strength at 7, 14, 21 and 28 days respectively. ... the suitability of using waste products to produce lightweight ... suitability of machine crushed animal bones as partial or.

  8. River water quality in the northern sugarcane-producing regions of ...

    African Journals Online (AJOL)

    2011-02-16

    Feb 16, 2011 ... Sugarcane production in South Africa occurs exclusively in the eastern regions of ... transboundary rivers, making their management internation- ...... KOEGELENBERG FH (2004) Irrigation User's Manual – Chapter 5: Water.

  9. In-vitro regeneration of sugarcane (saccharum officinarum L.)

    International Nuclear Information System (INIS)

    Azu, E.

    2009-01-01

    Sugarcane (Saccharum officinarum L.) cultivars Barbados 46 (B46), Natal Coimbatore 339 (NC0339), Ragna, local sugarcane cultivar (LSC) and Kenana (Kn) series sourced from Kyebi, Akorley, Subriso, Jejeti and the University of Ghana Agriculture Research Station, Kpong, were evaluated for sterilisation, multiplication and rooting. An efficient double sterilisation protocol was achieved by immersing axillary buds pre-treated with Goldazim (active ingredient carbendazim) in 0.2% mercuric chloride for 7 minutes followed by 0.1 % mercuric chloride for 3 minutes. At this optimal sterilisation regime, 70% of the cultured buds were decontaminated. However, post sterilisation survival required the incorporation of 0.002g/L and 0.001g/L of amphotericin Band cefotaxime respectively in the culture medium indicating that the contaminants were endophytic. Evaluation for multiple shoot induction was conducted using Murashige and Skoog (1962) basal salts (MS) medium supplemented with 25g/L sucrose, 2mg/L IAA, 2mg/L GA 3 , 3g/L activated charcoal and varying concentrations (mg/L) of BAP or kinetin. The response of the cultivars to shoot induction varied with Ragna producing the highest number of shoots (2.17) on 5mg/L BAP indicating genotypic differences. Naphthalene acetic acid (NAA) at a concentration of 5mg/L induced the highest frequency (65%) of roots in all the cultivars tested. Post-flask acclimatization and survival of plantlets was high and independent of the age at which regenerated plantlets were transferred to the plant barn for weaning. This procedure could therefore be useful for regenerating sugarcane plantlets as well as provide target tissues for genetic transformation studies (au).

  10. Economic-energy-environment analysis of prospective sugarcane bioethanol production in Brazil

    International Nuclear Information System (INIS)

    Lopes de Carvalho, Ariovaldo; Antunes, Carlos Henggeler; Freire, Fausto

    2016-01-01

    Highlights: • A Hybrid IO-MOLP model is formulated for energy-economic-environmental analysis. • Scenarios for sugarcane cultivation and 1st- and 2nd-generation bioethanol production. • Higher energy use and GHG emissions due to chemicals in 2G processes. • Lower overall employment level in the 1G + 2G scenarios compared to the 1G scenario. • Policies and technological choices should consider direct and indirect effects of 2G. - Abstract: Bioethanol from sugarcane can be produced using first-generation (1G) or second-generation (2G) technologies. 2G technologies can increase the capacity of production per sugarcane mass input and are expected to have a key role in future reductions of environmental impacts of sugarcane bioethanol. A hybrid Input-Output (IO) framework is developed for Brazil coupling the System of National Accounts and the National Energy Balance, which is extended to assess Greenhouse Gas (GHG) emissions. Life-cycle based estimates for two sugarcane cultivation systems, two 1G and eight 2G bioethanol production scenarios, are coupled in the IO framework. A multi-objective linear programming (MOLP) model is formulated based on this framework for energy-economic-environmental analysis of the Brazilian economic system and domestic bioethanol supply in prospective scenarios. Twenty-four solutions are computed: four “extreme” solutions resulting from the individual optimization of each objective function (GDP, employment level, total energy consumption and total GHG emissions - 1G scenario), ten compromise solutions minimizing the distance of the feasible region to the ideal solution (1G, 1G-optimized and prospective 1G + 2G scenarios), and ten solutions maximizing the total bioethanol production (1G, 1G-optimized and prospective 1G + 2G scenarios). Higher diesel oil and lubricants consumption in the mechanical harvesting process has counterbalanced the positive effects of more efficient trucks leading to higher energy consumption and GHG

  11. Detection of Bar Transgenic Sugarcane with a Rapid and Visual Loop-Mediated Isothermal Amplification Assay.

    Science.gov (United States)

    Zhou, Dinggang; Wang, Chunfeng; Li, Zhu; Chen, Yun; Gao, Shiwu; Guo, Jinlong; Lu, Wenying; Su, Yachun; Xu, Liping; Que, Youxiong

    2016-01-01

    Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP) assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg(2+), 6:1 ratio of inner vs. outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was 10-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100%) by LAMP and 97/100 cases (97%) by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable, and cost-effective for detection of the bar specific transgenic sugarcane.

  12. Detection of bar transgenic sugarcane with a rapid and visual loop-mediated isothermal amplification assay

    Directory of Open Access Journals (Sweden)

    Dinggang eZhou

    2016-03-01

    Full Text Available Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg2+, 6:1 ratio of inner vs outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was ten-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100% by LAMP and 97/100 cases (97% by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable and cost-effective for detection of the bar specific transgenic sugarcane.

  13. Infestation of froghopper nymphs changes the amounts of total phenolics in sugarcane

    Directory of Open Access Journals (Sweden)

    Silva Rafael José Navas da

    2005-01-01

    Full Text Available The increased rate of sugarcane harvest without previous burn has provided a very favorable environment to the froghopper Mahanarva fimbriolata (Stal, 1854, with high moisture and low temperature variation. Few works have studied the response of sugarcane to this pest, so little is known about resistant cultivars. Plant phenolics are widely studied compounds because of their known antiherbivore effect. This research aims to determine if the attack of M. fimbriolata nymphs stimulates the accumulation of total phenolics in sugarcane. The experiment was carried out in greenhouse and arranged in completely randomized design, in a 3 X 2 X 4 factorial with three replications. Second instar nymphs of M. fimbriolata were infested at the following rates: control, 2-4 and 4-8 nymphs per pot (first-second infestations, respectively. Pots were covered with nylon net and monitored daily to isolate the effect of leaf sucking adults. Leaf and root samples were collected and kept frozen in liquid nitrogen until analyses. Infested plants showed higher levels of phenolics in both root and leaf tissues. In roots, the cultivar SP80-1816 accumulated more phenolic compounds in response to the infestation of M. fimbriolata. On the other hand, higher levels were found in leaves and roots of control plants of SP86-42, which might be an indication of a non-preference mechanism. The increase of total phenolics in sugarcane infested with root-sucking froghopper nymphs does not seem to be useful to detect the resistance to this pest.

  14. Green synthesis of highly fluorescent carbon quantum dots from sugarcane bagasse pulp

    Energy Technology Data Exchange (ETDEWEB)

    Thambiraj, S. [Nano-Bio Materials and Sensors Laboratory, PSG Institute of Advanced Studies, Coimbatore, 641 004, Tamil Nadu (India); Ravi Shankaran, D., E-mail: dravishankaran@hotmail.com [Nano-Bio Materials and Sensors Laboratory, PSG Institute of Advanced Studies, Coimbatore, 641 004, Tamil Nadu (India); National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy Campus, Chennai, 600 025, Tamil Nadu (India)

    2016-12-30

    Graphical abstract: Schematic representation of CQDs from sugarcane bagasse carbon. - Highlights: • CQDs were synthesised from sugarcane bagasse waste with top down approaches. • Synthesis method is green, simple and efficient process. • CQDs possess high quantum yield, good stability and highly fluorescent in nature. • The morphological and topographical study of CQDs was done by HR-TEM and AFM and was observed that the average size is 4.1 ± 0.17 nm and surface thickness is 5 nm. - Abstract: Carbon quantum dots (CQDs) have great potential due to its advantageous characteristics of highly fluorescent nature and good stability. In this study, we aimed to develop a simple and efficient method for the green synthesis of fluorescent CQDs from sugarcane bagasse, a renewable and sustainable resource. The process involves the top down approach of chemical oxidation followed by exfoliation of sugarcane carbon. The synthesized CQDs was characterized by UV–vis absorption spectroscopy, Spectrofluorophotometry, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Raman spectroscopy, X-ray photon spectroscopy (XPS), Atomic force microscopy (AFM) and High-resolution transmission electron microscopy (HR-TEM). The synthesized CQDs possess stable fluorescent properties, good bio-compatibility and high quantum yield. The CQDs are highly crystalline with longitudinal dimensions of 4.1 ± 0.17 nm with an average roughness of around 5 nm. The XRD and TEM analysis indicates that the synthesized CQDs possess face centred cubic crystal structure. The results suggest that the proposed CQDs could be utilized for bio-sensor, bio-imaging and drug delivery applications.

  15. Silicate fertilization of tropical soils: silicon availability and recovery index of sugarcane

    Directory of Open Access Journals (Sweden)

    Mônica Sartori de Camargo

    2013-10-01

    Full Text Available Sugarcane is considered a Si-accumulating plant, but in Brazil, where several soil types are used for cultivation, there is little information about silicon (Si fertilization. The objectives of this study were to evaluate the silicon availability, uptake and recovery index of Si from the applied silicate on tropical soils with and without silicate fertilization, in three crops. The experiments in pots (100 L were performed with specific Si rates (0, 185, 370 and 555 kg ha-1 Si, three soils (Quartzipsamment-Q, 6 % clay; Rhodic Hapludox-RH, 22 % clay; and Rhodic Acrudox-RA, 68 % clay, with four replications. The silicon source was Ca-Mg silicate. The same Ca and Mg quantities were applied to all pots, with lime and/or MgCl2, when necessary. Sugarcane was harvested in the plant cane and first- and second-ratoon crops. The silicon rates increased soil Si availability and Si uptake by sugarcane and had a strong residual effect. The contents of soluble Si were reduced by harvesting and increased with silicate application in the following decreasing order: Q>RH>RA. The silicate rates promoted an increase in soluble Si-acetic acid at harvest for all crops and in all soils, except RA. The amounts of Si-CaCl2 were not influenced by silicate in the ratoon crops. The plant Si uptake increased according to the Si rates and was highest in RA at all harvests. The recovery index of applied Si (RI of sugarcane increased over time, and was highest in RA.

  16. Subtractive hybridization-mediated analysis of genes and in silico prediction of associated microRNAs under waterlogged conditions in sugarcane (Saccharum spp.

    Directory of Open Access Journals (Sweden)

    Mohammad Suhail Khan

    2014-01-01

    Full Text Available Sugarcane is an important tropical cash crop meeting 75% of world sugar demand and it is fast becoming an energy crop for the production of bio-fuel ethanol. A considerable area under sugarcane is prone to waterlogging which adversely affects both cane productivity and quality. In an effort to elucidate the genes underlying plant responses to waterlogging, a subtractive cDNA library was prepared from leaf tissue. cDNA clones were sequenced and annotated for their putative functions. Major groups of ESTs were related to stress (15%, catalytic activity (13%, cell growth (10% and transport related proteins (6%. A few stress-related genes were identified, including senescence-associated protein, dehydration-responsive family protein, and heat shock cognate 70 kDa protein. A bioinformatics search was carried out to discover novel microRNAs (miRNAs that can be regulated in sugarcane plants subjected to waterlogging stress. Taking advantage of the presence of miRNA precursors in the related sorghum genome, seven candidate mature miRNAs were identified in sugarcane. The application of subtraction technology allowed the identification of differentially expressed sequences and novel miRNAs in sugarcane under waterlogging stress. The comparative global transcript profiling in sugarcane plants undertaken in this study suggests that proteins associated with stress response, signal transduction, metabolic activity and ion transport play important role in conferring waterlogging tolerance in sugarcane.

  17. Subtractive hybridization-mediated analysis of genes and in silico prediction of associated microRNAs under waterlogged conditions in sugarcane (Saccharum spp.)

    KAUST Repository

    Khan, Mohammad Suhail

    2014-06-09

    Sugarcane is an important tropical cash crop meeting 75% of world sugar demand and it is fast becoming an energy crop for the production of bio-fuel ethanol. A considerable area under sugarcane is prone to waterlogging which adversely affects both cane productivity and quality. In an effort to elucidate the genes underlying plant responses to waterlogging, a subtractive cDNA library was prepared from leaf tissue. cDNA clones were sequenced and annotated for their putative functions. Major groups of ESTs were related to stress (15%), catalytic activity (13%), cell growth (10%) and transport related proteins (6%). A few stress-related genes were identified, including senescence-associated protein, dehydration-responsive family protein, and heat shock cognate 70. kDa protein. A bioinformatics search was carried out to discover novel microRNAs (miRNAs) that can be regulated in sugarcane plants subjected to waterlogging stress. Taking advantage of the presence of miRNA precursors in the related sorghum genome, seven candidate mature miRNAs were identified in sugarcane. The application of subtraction technology allowed the identification of differentially expressed sequences and novel miRNAs in sugarcane under waterlogging stress. The comparative global transcript profiling in sugarcane plants undertaken in this study suggests that proteins associated with stress response, signal transduction, metabolic activity and ion transport play important role in conferring waterlogging tolerance in sugarcane. © 2014 The Authors.

  18. Identification and Characterization of Pathogenic and Endophytic Fungal Species Associated with Pokkah Boeng Disease of Sugarcane

    Directory of Open Access Journals (Sweden)

    Angelyn Hilton

    2017-06-01

    Full Text Available Pokkah Boeng is a serious disease of sugarcane, which can lead to devastating yield losses in crop-producing regions, including southern China. However, there is still uncertainty about the causal agent of the disease. Our aim was to isolate and characterize the pathogen through morphological, physiological, and molecular analyses. We isolated sugarcane-colonizing fungi in Fujian, China. Isolated fungi were first assessed for their cell wall degrading enzyme capabilities, and five isolates were identified for further analysis. Internal transcribed spacer sequencing revealed that these five strains are Fusarium, Alternaria, Phoma, Phomopsis, and Epicoccum. The Fusarium isolate was further identified as F. verticillioides after Calmodulin and EF-1α gene sequencing and microscopic morphology study. Pathogenicity assay confirmed that F. verticillioides was directly responsible for disease on sugarcane. Co-inoculation of F. verticillioides with other isolated fungi did not lead to a significant difference in disease severity, refuting the idea that other cellulolytic fungi can increase disease severity as an endophyte. This is the first report characterizing pathogenic F. verticillioides on sugarcane in southern China.

  19. Growth and metal uptake of energy sugarcane (Saccharum spp.) in different metal mine tailings with soil amendments.

    Science.gov (United States)

    Zhang, Xin; Zhu, Yongguan; Zhang, Yuebin; Liu, Yunxia; Liu, Shaochun; Guo, Jiawen; Li, Rudan; Wu, Songlin; Chen, Baodong

    2014-05-01

    A pot experiment was conducted to investigate the feasibility of growing energy sugarcane (Saccharum spp.) in three different metal mine tailings (Cu, Sn and Pb/Zn tailings) amended with uncontaminated soil at different mixing ratios. The results indicated that sugarcane was highly tolerant to tailing environments. Amendments of 20% soil to Sn tailings and 30% soil to Cu tailings could increase the biomass of cane-stem for use as the raw material for bioethanol production. Heavy metals were mostly retained in roots, which indicated that sugarcane was useful for the stabilization of the tailings. Bagasse and juice, as the most valuable parts to produce bioethanol, only accounted for 0.6%-3% and 0.6%-7% of the total metal content. Our study supported the potential use of sugarcane for tailing phytostabilization and bioenergy production. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  20. Study of Black Sand Particles from Sand Dunes in Badr, Saudi Arabia Using Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Haider Abbas Khwaja

    2015-08-01

    Full Text Available Particulate air pollution is a health concern. This study determines the microscopic make-up of different varieties of sand particles collected at a sand dune site in Badr, Saudi Arabia in 2012. Three categories of sand were studied: black sand, white sand, and volcanic sand. The study used multiple high resolution electron microscopies to study the morphologies, emission source types, size, and elemental composition of the particles, and to evaluate the presence of surface “coatings or contaminants” deposited or transported by the black sand particles. White sand was comprised of natural coarse particles linked to wind-blown releases from crustal surfaces, weathering of igneous/metamorphic rock sources, and volcanic activities. Black sand particles exhibited different morphologies and microstructures (surface roughness compared with the white sand and volcanic sand. Morphological Scanning Electron Microscopy (SEM and Laser Scanning Microscopy (LSM analyses revealed that the black sand contained fine and ultrafine particles (50 to 500 nm ranges and was strongly magnetic, indicating the mineral magnetite or elemental iron. Aqueous extracts of black sands were acidic (pH = 5.0. Fe, C, O, Ti, Si, V, and S dominated the composition of black sand. Results suggest that carbon and other contaminant fine particles were produced by fossil-fuel combustion and industrial emissions in heavily industrialized areas of Haifa and Yanbu, and transported as cloud condensation nuclei to Douf Mountain. The suite of techniques used in this study has yielded an in-depth characterization of sand particles. Such information will be needed in future environmental, toxicological, epidemiological, and source apportionment studies.

  1. Deformations during saturation of the crushed aggregate, Olkiluoto tonalite

    International Nuclear Information System (INIS)

    Laaksonen, R.; Rathmayer, H.; Takala, J.; Toernqvist, J.

    1994-03-01

    Crushed aggregate tonalite produced of crystalline tonalite or a correspondent rock with particle size up to 8 mm (or 16 mm) will be used as backfill material in the VLJ repository caverns at Olkiluoto (in Finland). The backfill material has to retard radionuclides, to restrict the groundwater perlocation and to support mechanically the concrete structure of the repository silos. Mechanical and hydraulic behaviour of crushed tonalite when effected by stresses applied during compaction of the backfill and due to groundwater perlocation was studied at three batches having different gradations. Information about the phenomenon of settlement due to saturation and as a function of the compaction methods was obtained from a literature survey. The maximum amount of possible deformation due to compaction was analyzed with a gyratory device, known to have a good repeatability. In a group of simulation tests using a large oedometer cell the amount of compression due to the saturation process was measured. Also studies on the suitability of different compaction methods could be done with these tests. (43 refs., 49 figs., 3 tabs.)

  2. Technics study on high accuracy crush dressing and sharpening of diamond grinding wheel

    Science.gov (United States)

    Jia, Yunhai; Lu, Xuejun; Li, Jiangang; Zhu, Lixin; Song, Yingjie

    2011-05-01

    Mechanical grinding of artificial diamond grinding wheel was traditional wheel dressing process. The rotate speed and infeed depth of tool wheel were main technics parameters. The suitable technics parameters of metals-bonded diamond grinding wheel and resin-bonded diamond grinding wheel high accuracy crush dressing were obtained by a mount of experiment in super-hard material wheel dressing grind machine and by analysis of grinding force. In the same time, the effect of machine sharpening and sprinkle granule sharpening was contrasted. These analyses and lots of experiments had extent instruction significance to artificial diamond grinding wheel accuracy crush dressing.

  3. pesticide residues in water from tpc sugarcane plantations

    African Journals Online (AJOL)

    ABSTRACT. We report herein, the analysis of water samples collected from TPC Sugarcane Plantation and its environs in Kilimanjaro region, which is the earliest intensive user of pesticides in Tanzania. A total of 50 water samples collected from 18 sampling sites between 2000 and 2001 were analyzed for pesticide ...

  4. Repeatibility of agroindustrial characters in sugarcane in different harvest cycles

    Directory of Open Access Journals (Sweden)

    Hudsonkléio Da Costa Silva

    Full Text Available ABSTRACT In commercial cultivation of sugarcane, knowledge about the repetition of agroindustrial characters is essential to identify long-lived genotypes in production cycles, which when selected, will contribute to the significant increase in productivity. This work evaluated the agroindustrial performance of 16 sugarcane genotypes in the sugarcane microregion Litoral Norte of Pernambuco in four harvest cycles and the regularity in the repetition of characters. The experiment was conducted in the agricultural area of São José sugar mill, Igarassu, state of Pernambuco, Brazil. The experiment was carried out following a randomized block design with four replications. The variables evaluated were: tons of POL per hectare (TPH, tons of cane per hectare (TCH, fiber (FIB, adjusted POL% (PCC, soluble solids content (BRIX, and total recoverable sugar (TRS. The variance analysis detected significant differences among the genotypes along the four harvest seasons, indicating genetic variability and possibility of success in the selection of superior genotypes. Estimates of repeatability coefficient point to regularity in the repetition of agro-industrial characteristics allowing to identify genotypes with the highest longevity. The genotypes SP79-1011, RB863129, RB92579, RB813804, RB982559 e RB982613 presented best agroindustrial performance, and two evaluations based on TPH and TCH characters are enough to select superior genotypes with 90% predictability of their actual values.

  5. Geo-Engineering Evaluation of Rock Masses for Crushed Rock and Cut Stones in Khartoum State, Sudan

    Science.gov (United States)

    Kheirelseed, E. E.; Ming, T. H.; Abdalla, S. B.

    The purpose of this study is to find artificial coarse aggregates and cut stones around Khartoum. To meat the objectives of the study, data from both field and laboratory are collected. The field data includes geological investigations based on different methods and samples collection, whereas the laboratory tests consists of specific gravity, water absorption, impact value, crushing value, Los Angeles abrasion, soundness tests. The field and laboratory results were weighed and compiled together to reveal the engineering performance of the different rock masses in term of cut stone and crushed aggregates. The results show that most of the examined rock masses are suitable for crushing, building and dressed stones. For decorative slabs only foliated granite and syenite masses can be used.

  6. Distribution and frequency of Bru1, a major brown rust resistance gene, in the sugarcane world collection

    Science.gov (United States)

    Brown rust, caused by Puccinia melanocephala, is an important disease of sugarcane worldwide. Molecular markers for a major brown rust resistance gene, Bru1, were used to screen a total of 1,282 clones in the World Collection of Sugarcane and Related Grasses (WCSRG) to determine the distribution and...

  7. ORGANIC MATTER LABILE FRACTIONS AND CARBON STOCKS IN A TYPIC QUARTZIPSAMMENT CULTIVATED WITH SUGARCANE HARVESTED WITHOUT BURNING

    Directory of Open Access Journals (Sweden)

    JOSÉ DE SOUZA OLIVEIRA FILHO

    2017-01-01

    Full Text Available The permanence of sugarcane straw on the soil surface, in systems without the pre-harvest straw burning practice, directly affects the soil organic matter dynamics. The objective of this work was to evaluate the changes in total organic carbon (TOC, carbon in the light organic matter (CLOM and particulate organic carbon (POC, and their carbon stocks in a typic Quartzipsamment cultivated for nine years with sugarcane crops, which were conducted without the pre-harvest straw burning practice, in Paraipaba, State of Ceará, Brazil. Disturbed and undisturbed soil samples were collected at depths of 0.0-0.025, 0.025-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.30 m, in the sugarcane crop area and in an adjacent native forest area, in order to quantify the TOC, CLOM and POC, as well as the carbon stocks accumulated in the layer 0.0-0.30 m related to these fractions (TOCSt, CLOMSt and POCSt. TOC content changes after nine years of sugarcane crops, conducted without pre-harvest straw burning, were found only in the layers 0.10-0.20 and 0.20-0.30 m. The CLOM varied only in the layer 0.025-0.05 m. The POC content changes were more noticeable than the changes in TOC and CMOL. The CLOM of the sugarcane crop area presented high similarity with TOC, which may affect their quantification in studies related to the soil organic matter dynamics. The sugarcane crop increased the TOCSt, POCSt and CLOMSt in the layer 0.0-0.30 m, compared with the adjacent native forest area.

  8. LEAF WHORL INOCULATION METHOD FOR SCREENING SUGARCANE RUST RESISTANCE

    Science.gov (United States)

    Technical Abstract: Sugarcane rust diseases, brown rust caused by Puccinia melanocephala, and orange rust caused by P. kuehnii, are agronomically important diseases in Florida. Cultivar resistance is the best means of controlling these diseases. Natural infection has been the primary means of asses...

  9. Towards a sustainable sugarcane industry in India : baseline results on Solidaridad’s programme: Increasing water use efficiency in sugarcane growing in India

    NARCIS (Netherlands)

    Plaisier, C.; Rijn, van F.; Ende, van der H.; Koster, T.

    2017-01-01

    Wageningen Economic Research conducts a study to evaluate the socioeconomic impact on sugarcane farmers of the Solidaridad programme. A pipeline approach was used, which clusters the farmers in cohorts based on the year they receive support and training: 2016, 2017 and 2018. A baseline survey was

  10. Recovery of salmonella serovar enteritidis from inoculated broiler hatching eggs using shell rinse and shell crush sampling methods

    Science.gov (United States)

    This study compared the recovery of Salmonella from hatching eggs using three sampling methods (eggshell rinsing, eggshell crush following a previous rinse, and eggshell crush without previous rinse). Eggshells were drop-inoculated with approximately 10, 100, or 1,000 cfu/eggshell of S. Enteritidis...

  11. New generation expandable sand screens

    OpenAIRE

    Syltøy, Christer

    2014-01-01

    Master's thesis in Petroleum engineering This thesis aims to give a general insight into sand control and various sorts of sand control measures and applications of sand control tools. Special focus will be given to expandable sand screens – a technology which came about in the late 1990’s through the use of flexible, expandable tubulars as base pipe in sand screens. More specifically Darcy’s Hydraulic Endurance Screens, a compliant sand screen system using hydraulic activation, and the fu...

  12. Screening for Resistance to Brown Rust of Sugarcane: Use of Bru1 resistance gene prospects and challenges

    Science.gov (United States)

    Brown rust of sugarcane caused by, Puccinia melanocephala, is a serious problem in the US sugarcane industry. A major resistance gene, Bru1 was identified and methodology for detecting it was developed by French scientists at CIRAD. The majority of the research resulting in the discovery of Bru1 res...

  13. Sugarcane straw harvest effects on soil quality and plant growth: preliminary data synthesis of a multi-local project running in Brazil

    Science.gov (United States)

    Cherubin, Maurício; Cerri, Carlos E. P.; Feigl, Brigitte J.; Cerri, Carlos C.

    2017-04-01

    Brazil is the largest sugarcane producer in the world, and consequently, it is one of major players in the bioenergy production sector. Despite that, growing demands for bioenergies have raised the interest of Brazilian sugarcane industry to harvest the sugarcane straw left on the field for cellulosic ethanol production and/or bioelectricity cogeneration. However, crop residues have a key role in the soil, affecting directly or indirectly multiple soil functions and related ecosystem services. Therefore, indiscriminate straw harvest could jeopardize soil quality, decreasing its capacity to sustain plant productivity over time. In order to evaluate the potential impacts of sugarcane straw harvest on soil quality and plant growth, we are conducting since 2014 a multi-local project across central-southern Brazil, the main core of sugarcane production in the world. A wide range of soil chemical, physical and biological parameters, as well as, plant biomass production has been quantified under increasing straw harvest intensities. Our preliminary findings have showed that short-term straw harvest management did not affect total organic C stocks; however, high straw harvest led to significant reduction in labile C forms (e.g., microbial biomass C and N), and abundance of microbial communities as well. Sugarcane straw harvest affects soil nutrient cycling, since significant amount of nutrients are removed annually by straw, especially in top (green) leaves. In addition, our data show that straw acts as a thermal insulator, decreasing soil temperature amplitude and keeping soil moisture for a longer time. Straw harvest management did not affect sugarcane yields in the first two crop seasons. Based on this first synthesis of the project, we conclude that short-term sugarcane straw harvest led to soil changes, especially in more sensitive and dynamic properties, which did not affect the plant yield. However, long-term impacts should be monitored towards a better

  14. Fine-Needle Aspiration, Touch Imprint, and Crush Preparation Cytology for Diagnosing Thyroid Malignancies in Thyroid Nodules.

    Science.gov (United States)

    Ahmadinejad, Mojtaba; Aliepour, Asghar; Anbari, Khatereh; Kaviani, Mojhgan; Ganjizadeh, Hasan; Nadri, Sedigheh; Foroutani, Niloufar; Meysami, Masoumeh; Almasi, Vahid

    2015-12-01

    Several methods are used to evaluate the thyroid nodules. The aim of this study was to determine the sensitivity, specificity, false positive and negative rates, positive predictive value (PPV), and negative predictive value (NPV) of touch imprint, crush preparation, and fine-needle aspiration (FNA) methods. This cross-sectional study was done in Shohada-ye Ashayer University Hospital in Khorramabad. All the patients who underwent thyroid surgery due to thyroid nodules in this hospital between March and September 2011 were evaluated. The thyroid nodules of all the patients were evaluated by touch imprint, crush preparation, FNA, and permanent pathology methods. Finally, the results of the first three methods were compared with the result of permanent pathology method. The mean age of 104 patients who underwent thyroid surgery was 42.6 ± 11.9 years old. Based on permanent pathology, touch imprint, crush preparation, and FNA methods, 15.3, 6.25, 6.25, and 4.4 % of thyroid nodules were malignant, respectively. Sensitivity, specificity, false positive rate, false negative rate, PPV, and NPV of FNA biopsy were 62.5, 100, 0, 37.5, 100, and 95.3 %, respectively. Also, sensitivity, specificity, false positive rate, false negative rate, PPV, and NPV of touch imprint and crush preparation were equal and were 80, 100, 0, 20, 100, and 96.7 %, respectively. Using touch imprint and crush preparation in evaluation of thyroid nodules for rapid evaluation of these nodules in operating rooms seems to be logical, and it can prevent further surgeries.

  15. Saltation of non-spherical sand particles.

    Directory of Open Access Journals (Sweden)

    Zhengshi Wang

    Full Text Available Saltation is an important geological process and the primary source of atmospheric mineral dust aerosols. Unfortunately, no studies to date have been able to precisely reproduce the saltation process because of the simplified theoretical models used. For example, sand particles in most of the existing wind sand movement models are considered to be spherical, the effects of the sand shape on the structure of the wind sand flow are rarely studied, and the effect of mid-air collision is usually neglected. In fact, sand grains are rarely round in natural environments. In this paper, we first analyzed the drag coefficients, drag forces, and starting friction wind speeds of sand grains with different shapes in the saltation process, then established a sand saltation model that considers the coupling effect between wind and the sand grains, the effect of the mid-air collision of sand grains, and the effect of the sand grain shape. Based on this model, the saltation process and sand transport rate of non-spherical sand particles were simulated. The results show that the sand shape has a significant impact on the saltation process; for the same wind speed, the sand transport rates varied for different shapes of sand grains by as much as several-fold. Therefore, sand shape is one of the important factors affecting wind-sand movement.

  16. Optimization of Protocols for In Vitro Regeneration of Sugarcane (Saccharum officinarum

    Directory of Open Access Journals (Sweden)

    Shakra Jamil

    2017-01-01

    Full Text Available Sugarcane contributes 60–70% of annual sugar production in the world. Somaclonal variation has potential to enhance genetic variation present within a species. Present study was done to optimize an in vitro propagation protocol for sugarcane. The experiments included four varieties, 9 callus induction media, 27 regeneration media, and 9 root induction media under two-factor factorial CRD. Data were recorded on callus induction, embryogenic callus formation, shoot elongation (cm, root induction, and plant regeneration. Statistically significant differences existed between genotypes and treatments for callus induction (%, embryogenic callus formation (%, shoot elongation (cm, root induction, and plant regeneration (%. All parameters showed dependency on genotypes, culture media, and their interaction. Highest callus induction (95% embryogenic callus formation (95% was observed in callus induction media 5. Highest plantlet regeneration (98.9% capacity was observed in regeneration media 11 whereas maximum shoot elongation (12.13 cm and root induction (8.32 were observed in rooting media 4. G1 showed best response for all traits and vice versa for G4. Hence it was concluded that G1, callus induction media 5, regeneration media 11, and rooting media 4 are the best conditions for in vitro propagation of sugarcane.

  17. Otimização do planejamento hierárquico da produção em usinas cooperadas do setor sucroenergético Optimization of the hierarchical production planning of a cooperative society of sugarcane milling companies

    Directory of Open Access Journals (Sweden)

    Rafael Piatti Oiticica de Paiva

    2012-01-01

    Full Text Available Neste trabalho apresenta-se um modelo de otimização para o planejamento agregado da produção em usinas cooperadas do setor sucroenergético. Esta modelagem considera a relação hierárquica existente entre o planejamento anual da cooperativa e o planejamento tático de safra das usinas cooperadas. No nível de decisão da cooperativa, o modelo indica a meta de produção de cada usina e define a política de estocagem e de atendimento da demanda. No nível de decisão de uma usina cooperada, o modelo possibilita definir a quantidade de cana-de-açúcar colhida, a quantidade transportada por prestador de serviço, a seleção dos processos de produção de açúcar, álcool, melaço e energia elétrica. Para resolver os modelos de programação linear e programação inteira mista envolvidos, utilizou-se uma linguagem de modelagem algébrica e um software de última geração de programação matemática. Resultados computacionais obtidos em estudo de caso são apresentados como forma de ilustrar e validar a aplicação.The main concern of this work is related to the presentation of an aggregate production planning model of a cooperative society of sugar and alcohol milling companies. This mathematical model is based on a hierarchical approach between the annual planning problem of the cooperative and the tactical planning horizon of the sugarcane mills. At the cooperative level, the main questions are related to the allocation of production goals to each mill and the management of inventory and dynamic demands. At the milling companies' level, a process selection model aims at helping the decision makers to determine the following: quantity of sugarcane crushed; selection of sugarcane suppliers; selection of sugarcane transport system; and selection of industrial processes used in sugar, alcohol, molasses and energy production. In order to solve the linear and mixed integer mathematical models involved, a modeling language with an

  18. Improving yield and water use efficiency of sugarcane under drip irrigation in the Gharb region of Morocco

    Directory of Open Access Journals (Sweden)

    M. AABAD

    2017-03-01

    Full Text Available One of the most limiting factors for agricultural development in Morocco is water scarcity linked to climate change. Since 2008, an important program promoting drip irrigation was undertaken by the state to achieve water saving and productivity. An experiment on sugarcane was conducted in the Gharb region under Mediterranean climate with a silty clay soil during two cropping seasons. The objectives were to assess the sugarcane water requirements, optimize WUE and test the crop response to variable irrigation water supplies under drip irrigation. The experiment was conducted using ‘’CP70-321’’ sugarcane cultivar in an experimental station using a randomized block design with four replications and five water regimes. The results showed a highly significant effect of the water regime on sugar and stems yields and also on height of stems. Water requirements for sugarcane were estimated at 7500 m³.ha-1, but 5000 m³.ha-1 equivalent to 67%ETc, was sufficient to optimize WUE (132 to 157 kg of stems ha-1.mm-1 and 22.2 to 24.2 kg of sugar ha-1.mm-1. This means that drip irrigation on sugarcane could potentially i save about 50% of the irrigation volume, comparatively to sprinkler irrigation, ii almost double the stem yields and iii increase the sugar yields from 8 to 23 tons/ha.

  19. Interaction between an Eco-Spiral Bolt and Crushed Rock in a Borehole Evaluated by Pull-Out Testing

    Directory of Open Access Journals (Sweden)

    Seong-Seung Kang

    2017-01-01

    Full Text Available The interactions between an eco-spiral bolt and crushed rocks in a borehole were evaluated by pull-out testing in a laboratory and numerical analysis. The porosity of the crushed rock surrounding the bolt depended on the size of the eco-spiral bolt and affected the eco-spiral bolt’s axial resistance force. The axial resistance force and the porosity of the crushed rocks in the borehole showed an inverse relationship. The porosity was also related to the size of the eco-spiral bolt. The maximum principal stress between the bolt and the rock was related to the porosity of the crushed rock and the size difference between the eco-spiral bolt and the borehole. At low porosity the experimental and numerical analyses show similar relationships between the axial resistance force and the displacement. However, at high porosity, the numerical results deviated greatly from the experimental observation. The initial agreement is attributed to the state of residual resistance after the maximum axial resistance force, and the latter divergence was due to the decreasing axial resistance force owing to slippage.

  20. Transient convergence and compaction of crushed salt as incorporated in the computer code EMOS

    International Nuclear Information System (INIS)

    Heijdra, J.J.; Hamilton, L.F.M.; Prij, J.; Slagter, W.

    1995-11-01

    An improved model for description of the transient convergence of cavities in rock salt, together with an improved model for the compaction of crushed salt is introduced. The covergence model is based on solutions of the analytical expressions based on secondary creep for a cylindrical and spherical cavity in rock salt. For the model for compaction of crushed salt the relations based on theoretical micro mechanisms have been fitted to laboratory results. A description is given of how the improved models are incorporated into the program EMOS. (orig.)