The Paradox of Precaution

International Nuclear Information System (INIS)

Bechmann, Gotthard

2009-12-01

The precautionary principle cannot rid itself of risk. In the area of precaution it re-emerges as the risk of precaution. This is due to the fact that precaution is a disposition of the future which can only be decided in the medium of probability/lack of probability. With this type of calculation, we take advantage of the uncertainty of the future and at the same time our own uncertainty to make decisions in the present that can be confirmed or refuted by future states of the present. We will never reach the safe side since the future as future is inherently uncertain. If we take this realisation as a basis, we see that precaution does not mean creating a future free of risk or danger, but that the precautionary principle is a meta-rule how this basic uncertainty can be, and is, processed communicatively, i.e. at the societal level. On this topic a number of remarks: - There are no apodeictic judgements possible with respect to issues of the future, in particular when these are possible catastrophes. Whoever operates in such cases with true assertions disqualifies himself. As we know, this has ruined the political reputation of scientific experts. - We must further do without consensus on principles or on the priority of certain values. Negotiations on decisions must be formulated and understood in a way that they are compatible with a disagreement on principle. Current coordination is then more important than correspondence in the cognitive and evaluative foundations of the assessment of future. - Communication itself is better set up not as communicative action in the sense of Habermas, but on the contrary as strategic action under conditions of uncertainty, that is we have to stay aware that debates related to the future are social constructions and not true statements. - All in all, the demand for 'participation' should be downplayed in favour of strengthening the right to information in order to able to develop the largest possible number of constructs. - The

The Paradox of Precaution

Energy Technology Data Exchange (ETDEWEB)

Bechmann, Gotthard [Forschungszentrum Karlsruhe Technik und Umwelt, Inst. fuer Technikfolgeabschaetzung und Systemanalyse (ITAS), Karlsruhe (Germany)], e-mail: bechmann@itas.fzk.de

2009-12-15

The precautionary principle cannot rid itself of risk. In the area of precaution it re-emerges as the risk of precaution. This is due to the fact that precaution is a disposition of the future which can only be decided in the medium of probability/lack of probability. With this type of calculation, we take advantage of the uncertainty of the future and at the same time our own uncertainty to make decisions in the present that can be confirmed or refuted by future states of the present. We will never reach the safe side since the future as future is inherently uncertain. If we take this realisation as a basis, we see that precaution does not mean creating a future free of risk or danger, but that the precautionary principle is a meta-rule how this basic uncertainty can be, and is, processed communicatively, i.e. at the societal level. On this topic a number of remarks: - There are no apodeictic judgements possible with respect to issues of the future, in particular when these are possible catastrophes. Whoever operates in such cases with true assertions disqualifies himself. As we know, this has ruined the political reputation of scientific experts. - We must further do without consensus on principles or on the priority of certain values. Negotiations on decisions must be formulated and understood in a way that they are compatible with a disagreement on principle. Current coordination is then more important than correspondence in the cognitive and evaluative foundations of the assessment of future. - Communication itself is better set up not as communicative action in the sense of Habermas, but on the contrary as strategic action under conditions of uncertainty, that is we have to stay aware that debates related to the future are social constructions and not true statements. - All in all, the demand for 'participation' should be downplayed in favour of strengthening the right to information in order to able to develop the largest possible number of

The Paradox of Precaution

Energy Technology Data Exchange (ETDEWEB)

Bechmann, Gotthard [Forschungszentrum Karlsruhe Technik und Umwelt, Inst. fuer Technikfolgeabschaetzung und Systemanalyse (ITAS), Karlsruhe (Germany)

2009-12-15

The precautionary principle cannot rid itself of risk. In the area of precaution it re-emerges as the risk of precaution. This is due to the fact that precaution is a disposition of the future which can only be decided in the medium of probability/lack of probability. With this type of calculation, we take advantage of the uncertainty of the future and at the same time our own uncertainty to make decisions in the present that can be confirmed or refuted by future states of the present. We will never reach the safe side since the future as future is inherently uncertain. If we take this realisation as a basis, we see that precaution does not mean creating a future free of risk or danger, but that the precautionary principle is a meta-rule how this basic uncertainty can be, and is, processed communicatively, i.e. at the societal level. On this topic a number of remarks: - There are no apodeictic judgements possible with respect to issues of the future, in particular when these are possible catastrophes. Whoever operates in such cases with true assertions disqualifies himself. As we know, this has ruined the political reputation of scientific experts. - We must further do without consensus on principles or on the priority of certain values. Negotiations on decisions must be formulated and understood in a way that they are compatible with a disagreement on principle. Current coordination is then more important than correspondence in the cognitive and evaluative foundations of the assessment of future. - Communication itself is better set up not as communicative action in the sense of Habermas, but on the contrary as strategic action under conditions of uncertainty, that is we have to stay aware that debates related to the future are social constructions and not true statements. - All in all, the demand for 'participation' should be downplayed in favour of strengthening the right to information in order to able to develop the largest possible number of constructs. - The

The Paradox of Precaution

Energy Technology Data Exchange (ETDEWEB)

Bechmann, Gotthard (Forschungszentrum Karlsruhe Technik und Umwelt, Inst. fuer Technikfolgeabschaetzung und Systemanalyse (ITAS), Karlsruhe (Germany)), e-mail: bechmann@itas.fzk.de

2009-12-15

The precautionary principle cannot rid itself of risk. In the area of precaution it re-emerges as the risk of precaution. This is due to the fact that precaution is a disposition of the future which can only be decided in the medium of probability/lack of probability. With this type of calculation, we take advantage of the uncertainty of the future and at the same time our own uncertainty to make decisions in the present that can be confirmed or refuted by future states of the present. We will never reach the safe side since the future as future is inherently uncertain. If we take this realisation as a basis, we see that precaution does not mean creating a future free of risk or danger, but that the precautionary principle is a meta-rule how this basic uncertainty can be, and is, processed communicatively, i.e. at the societal level. On this topic a number of remarks: - There are no apodeictic judgements possible with respect to issues of the future, in particular when these are possible catastrophes. Whoever operates in such cases with true assertions disqualifies himself. As we know, this has ruined the political reputation of scientific experts. - We must further do without consensus on principles or on the priority of certain values. Negotiations on decisions must be formulated and understood in a way that they are compatible with a disagreement on principle. Current coordination is then more important than correspondence in the cognitive and evaluative foundations of the assessment of future. - Communication itself is better set up not as communicative action in the sense of Habermas, but on the contrary as strategic action under conditions of uncertainty, that is we have to stay aware that debates related to the future are social constructions and not true statements. - All in all, the demand for 'participation' should be downplayed in favour of strengthening the right to information in order to able to develop the largest possible number of

Compliance with barrier precautions during paediatric trauma resuscitations.

Science.gov (United States)

Kelleher, Deirdre C; Carter, Elizabeth A; Waterhouse, Lauren J; Burd, Randall S

2013-03-01

Barrier precautions protect patients and providers from blood-borne pathogens. Although barrier precaution compliance has been shown to be low among adult trauma teams, it has not been evaluated during paediatric resuscitations in which perceived risk of disease transmission may be low. The purpose of this study was to identify factors associated with compliance with barrier precautions during paediatric trauma resuscitations. Video recordings of resuscitations performed on injured children (compliance with an established policy requiring gowns and gloves. Depending on activation level, trauma team members included up to six physicians, four nurses, and a respiratory therapist. Multivariate logistic regression was used to determine the effect of team role, resuscitation factors, and injury mechanism on barrier precaution compliance. Over twelve weeks, 1138 trauma team members participated in 128 resuscitations (4.7% penetrating injuries, 9.4% highest level activations). Compliance with barrier precautions was 81.3%, with higher compliance seen among roles primarily at the bedside compared to positions not primarily at the bedside (90.7% vs. 65.1%, pcompliance, while surgical attendings (20.8%) had the lowest (prole, increased compliance was observed during resuscitations of patients with penetrating injuries (OR=3.97 [95% CI: 1.35-11.70], p=0.01), during resuscitations triaged to the highest activation level (OR=2.61 [95% CI: 1.34-5.10], p=0.005), and among team members present before patient arrival (OR=4.14 [95% CI: 2.29-7.39], pCompliance with barrier precautions varies by trauma team role. Team members have higher compliance when treating children with penetrating and high acuity injuries and when arriving before the patient. Interventions integrating barrier precautions into the workflow of team members are needed to reduce this variability and improve compliance with universal precautions during paediatric trauma resuscitations. Copyright © 2012 Elsevier

Influence of undergraduate nursing student teaching methods on learning standard precautions and transmission-based precautions: Experimental research.

Science.gov (United States)

Kappes Ramirez, Maria Soledad

2018-02-01

An experimental study was performed with undergraduate nursing students in order to determine, between two methodologies, which is the best for learning standard precautions and precautions based on disease transmission mechanisms. Students in the sample are stratified by performance, with the experimental group (49 students) being exposed to self-instruction and clinical simulation on the topic of standard precautions and special precautions according to disease transmission mechanisms. Conventional classes on the same topics were provided to the control group (49 students). The experimental group showed the best performance in the multiple-choice post-test of knowledge (p=0.002) and in the assessment of essay questions (p=0.043), as well as in the evaluation of a simulated scenario, in relation to the control group. This study demonstrates that it is possible to transfer some teaching subjects on the prevention of Healthcare Associated Infections (HAIs) to self-learning by means of virtual teaching strategies with good results. This allows greater efficiency in the allocation of teachers to clinical simulation or learning situations in the laboratory, where students can apply what they have learned in the self-instruction module. Copyright © 2017 Elsevier Ltd. All rights reserved.

Implementing the principle of precaution in the nuclear industry - the place of probabilistic studies

International Nuclear Information System (INIS)

Carnino, A.

2003-01-01

Nuclear safety systems derive from implementation of the principle of precaution and seek to protect workers, the public and the environment against the effects of ionizing radiation. Basically, a nuclear safety system involves risk identification, radioprotection, a thorough understanding of the effects of ionizing radiation, an independent safety authority responsible for inspection and regulation, and a technical approach based on comprehensive defence. Probabilistic studies conducted over the last thirty years or so have generated descriptions of just about every imaginable scenario liable to cause dysfunction. And as our nuclear plants age, we also need to allow for the additional attendant risks. (author)

Knowledge and precaution

DEFF Research Database (Denmark)

Lassen, Jesper; Oelofse, Myles

2018-01-01

Organic farming is under constant pressure to reinvent itself by adopting new technologies. This article examines the role of precaution in organic farmers' assessments of new technologies, and asks how their assessments draw on different types of knowledge. The article further explores how knowl...

Scoping in environmental impact assessment: Balancing precaution and efficiency?

International Nuclear Information System (INIS)

Snell, Tim; Cowell, Richard

2006-01-01

Scoping is a crucial yet under-researched stage of environmental impact assessment, in which practice falls well behind conceptual ideals. We argue that such 'implementation deficits' reflect dilemmas between two key rationales for scoping - environmental precaution and decision-making efficiency - and between technical and participatory conceptions of the decision-making process. We use qualitative research to understand how scoping practice in the UK reconciles these competing imperatives. Our findings suggest that practitioners mainly rationalise their approach in terms of decision-making efficiency, while justifying excluding the public from scoping on grounds of prematurity, delay and risks of causing confusion. The tendency to scope issues in rather than exclude them reflects a pervasive concern for legal challenge, rather than environmental precaution, but this reinforces standard lists of environmental considerations rather than the investigation of novel, cumulative or indirect risks

Cocoa Farmers' Compliance with Safety Precautions in Spraying Agrochemicals and Use of Personal Protective Equipment (PPE) in Cameroon.

Science.gov (United States)

Oyekale, Abayomi Samuel

2018-02-13

The inability of farmers to comply with essential precautions in the course of spraying agrochemicals remains a policy dilemma, especially in developing countries. The objectives of this paper were to assess compliance of cocoa farmers with agrochemical safety measures, analyse the factors explaining involvement of cocoa farmers in the practice of reusing agrochemical containers and wearing of personal protective equipment (PPE). Data were collected with structured questionnaires from 667 cocoa farmers from the Centre and South West regions in Cameroon. Data analyses were carried out with Probit regression and Negative Binomial regression models. The results showed that average cocoa farm sizes were 3.55 ha and 2.82 ha in South West and Centre regions, respectively, and 89.80% and 42.64% complied with manufacturers' instructions in the use of insecticides. Eating or drinking while spraying insecticides and fungicides was reported by 4.20% and 5.10% of all farmers in the two regions, respectively. However, 37.78% and 57.57% of all farmers wore hand gloves and safety boots while spraying insecticides in the South West and Centre regions of Cameroon, respectively. In addition, 7.80% of all the farmers would wash agrochemical containers and use them at home, while 42.43% would wash and use them on their farms. Probit regression results showed that probability of reusing agrochemical containers was significantly influenced ( p agrochemicals.

Cocoa Farmers’ Compliance with Safety Precautions in Spraying Agrochemicals and Use of Personal Protective Equipment (PPE) in Cameroon

Science.gov (United States)

2018-01-01

The inability of farmers to comply with essential precautions in the course of spraying agrochemicals remains a policy dilemma, especially in developing countries. The objectives of this paper were to assess compliance of cocoa farmers with agrochemical safety measures, analyse the factors explaining involvement of cocoa farmers in the practice of reusing agrochemical containers and wearing of personal protective equipment (PPE). Data were collected with structured questionnaires from 667 cocoa farmers from the Centre and South West regions in Cameroon. Data analyses were carried out with Probit regression and Negative Binomial regression models. The results showed that average cocoa farm sizes were 3.55 ha and 2.82 ha in South West and Centre regions, respectively, and 89.80% and 42.64% complied with manufacturers’ instructions in the use of insecticides. Eating or drinking while spraying insecticides and fungicides was reported by 4.20% and 5.10% of all farmers in the two regions, respectively. However, 37.78% and 57.57% of all farmers wore hand gloves and safety boots while spraying insecticides in the South West and Centre regions of Cameroon, respectively. In addition, 7.80% of all the farmers would wash agrochemical containers and use them at home, while 42.43% would wash and use them on their farms. Probit regression results showed that probability of reusing agrochemical containers was significantly influenced (p agrochemicals. PMID:29438333

Precautions against radiations

International Nuclear Information System (INIS)

Osborn, S.B.

1986-01-01

In this chapter the characteristics of ionizing and non-ionizing radiations likely to cause hazards in a chemical laboratory are considered. Quantities and units of radiation are described. The general principles of radiation protection, precautions against radiation hazards, ICRP standards and recommendations and the legislation relating to the control of radiation hazards in the UK are discussed. (U.K.)

Safety Precautions for Total Release Foggers

Science.gov (United States)

Total release foggers, also known as bug bombs, are pesticide products containing aerosol propellants that release their contents at once to fumigate an area. They can pose a hazard if used incorrectly. Find safety information and videos on this page.

Job safety in magnetic particle inspection

International Nuclear Information System (INIS)

Gallardo, Gerald S.

2007-01-01

Safety in the workplace is utmost importance to both employees and employers. It is a shared responsibility to make safety a way of life. General precautions to be exercised when performing magnetic particle inspection include consideration of exposure to oils, paste, and electrical current. It is important that the following minimum safety requirement to be observed when performing magnetic particle inspection. Always consult the Material Safety Data Sheet (MSDS) for the specific product or products you will be using to insure all necessary safety precautions are taken for potential health effects, first aid, fire hazard, accidental release measures, exposure controls, personal protection, physical properties,stability, reactivity toxicological information, disposal and transportation. (author)

Standard restrictive sternal precautions and modified sternal precautions had similar effects in people after cardiac surgery via median sternotomy (‘SMART’ Trial: a randomised trial

Directory of Open Access Journals (Sweden)

Md Ali Katijjahbe

2018-04-01

Full Text Available Question: In people who have undergone cardiac surgery via median sternotomy, does modifying usual sternal precautions to make them less restrictive improve physical function, pain, kinesiophobia and health-related quality of life? Design: Two-centre, randomised, controlled trial with concealed allocation, blinded assessors and intention-to-treat analysis. Participants: Seventy-two adults who had undergone cardiac surgery via a median sternotomy were included. Intervention: Participants were randomly allocated to one of two groups at 4 (SD 1 days after surgery. The control group received the usual advice to restrict their upper limb use for 4 to 6 weeks (ie, restrictive sternal precautions. The experimental group received advice to use pain and discomfort as the safe limits for their upper limb use during daily activities (ie, less restrictive precautions for the same period. Both groups received postoperative individualised education in hospital and via weekly telephone calls for 6 weeks. Outcome measures: The primary outcome was physical function assessed by the Short Physical Performance Battery. Secondary outcomes included upper limb function, pain, kinesophobia, and health-related quality of life. Outcomes were measured before hospital discharge and at 4 and 12 weeks postoperatively. Adherence to sternal precautions was recorded. Results: There were no statistically significant differences in physical function between the groups at 4 weeks (MD 1.0, 95% CI –0.2 to 2.3 and 12 weeks (MD 0.4, 95% CI –0.9 to 1.6 postoperatively. There were no statistically significant between-group differences in secondary outcomes. Conclusion: Modified (ie, less restrictive sternal precautions for people following cardiac surgery had similar effects on physical recovery, pain and health-related quality of life as usual restrictive sternal precautions. Similar outcomes can be anticipated regardless of whether people following cardiac surgery are managed with

Radiation safety in industrial applications of nuclear techniques

International Nuclear Information System (INIS)

Lam, E.S.

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

Radiation safety in industrial applications of nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies.

Science.gov (United States)

Haas, Emily J

2018-03-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers' particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices.

SAFETY INSTRUCTION AND SAFETY NOTE

CERN Multimedia

TIS Secretariat

2002-01-01

Please note that the SAFETY INSTRUCTION N0 49 (IS 49) and the SAFETY NOTE N0 28 (NS 28) entitled respectively 'AVOIDING CHEMICAL POLLUTION OF WATER' and 'CERN EXHIBITIONS - FIRE PRECAUTIONS' are available on the web at the following urls: http://edms.cern.ch/document/335814 and http://edms.cern.ch/document/335861 Paper copies can also be obtained from the TIS Divisional Secretariat, email: TIS.Secretariat@cern.ch

Universal Precautions: A Review

African Journals Online (AJOL)

DATONYE ALASIA

and hazards could cause devastating effects on. 2 health and ... (splash of blood or other body fluids into the eyes, nose or ... nurses, laboratory staff and aides who work in .... electric hand dryers are available which is ideal. ... self, patient and co-workers from infection. All ... with universal precautions include the absence of ...

The effect of contact precautions on healthcare worker activity in acute care hospitals.

Science.gov (United States)

Morgan, Daniel J; Pineles, Lisa; Shardell, Michelle; Graham, Margaret M; Mohammadi, Shahrzad; Forrest, Graeme N; Reisinger, Heather S; Schweizer, Marin L; Perencevich, Eli N

2013-01-01

Contact precautions are a cornerstone of infection prevention but have also been associated with less healthcare worker (HCW) contact and adverse events. We studied how contact precautions modified HCW behavior in 4 acute care facilities. Prospective cohort study. Four acute care facilities in the United States performing active surveillance for methicillin-resistant Staphylococcus aureus. Trained observers performed "secret shopper" monitoring of HCW activities during routine care, using a standardized collection tool and fixed 1-hour observation periods. A total of 7,743 HCW visits were observed over 1,989 hours. Patients on contact precautions had 36.4% fewer hourly HCW visits than patients not on contact precautions (2.78 vs 4.37 visits per hour; [Formula: see text]) as well as 17.7% less direct patient contact time with HCWs (13.98 vs 16.98 minutes per hour; [Formula: see text]). Patients on contact precautions tended to have fewer visitors (23.6% fewer; [Formula: see text]). HCWs were more likely to perform hand hygiene on exiting the room of a patient on contact precautions (63.2% vs 47.4% in rooms of patients not on contact precautions; [Formula: see text]). Contact precautions were found to be associated with activities likely to reduce transmission of resistant pathogens, such as fewer visits and better hand hygiene at exit, while exposing patients on contact precautions to less HCW contact, less visitor contact, and potentially other unintended outcomes.

FACTORS AFFECTING THE COMPLIANCE OF MYANMAR NURSES IN PERFORMING STANDARD PRECAUTION

Directory of Open Access Journals (Sweden)

Sa Sa Aung

2017-06-01

Full Text Available Introduction: Exposure to pathogens is a serious issue for nurses. The literature explains that standard precaution have not consistently done in nursing. The purpose of this study was to analyze the factors affecting the compliance of nurses in Myanmar in performing standard precautions. Methods: This study used a cross-sectional design. Samples included 34 nurses in Waibagi Specialist Hospital (SHW, Myanmar. The independent variables were the characteristics of nurses, knowledge of standard precaution, and exposure to blood / body fluids and needle puncture wounds. The dependent variable was the performance of standard prevention. Data analyzed using descriptive analysis and logistic regression. Results: The result showed that almost respondents (91.18% had a good knowledge about prevention standards and 73.5% of respondents had good adherence in performing standard precaution. However, in practice nurses have not been consistent in closing the needles that have been used correctly. The results showed that nurse characteristics did not significantly affect adherence to standard precaution with statistical test results as follows: age (p = 0.97, gender (p = 1.00, religion (p = 0.72, education (p = 0.85, work experience at SHW (p = 0, 84, education training program (p = 0.71, knowledge (p = 0.76, and needle stick injury (p = 0,17. But, there was a significant influence between adherence to standard precaution on the incidence of injury due to puncture needle with p value = 0.01. Discussion: The barriers to applying standard precautions by Myanmar nurses can be reduced by providing basic training, supervision and improvement of operational standard procedures.

Clima de segurança organizacional e a adesão às precauções padrão entre dentistas Organizational safety climate and adherence to standard precautions among dentists

Directory of Open Access Journals (Sweden)

Patrícia Helena Vivan Ribeiro

2013-01-01

Full Text Available OBJETIVO: Verificar a percepção do dentista a respeito do clima de segurança no trabalho em relação à adesão às precauções padrão. MÉTODOS: Trata-se de um estudo quantitativo, transversal realizado através da aplicação da escala de Clima de Segurança a uma população de 224 dentistas que atuavam em unidades de Atenção Básica de Saúde de seis municípios do Paraná. RESULTADOS: O escore total de 3,43 (DP=0,88 revela a baixa percepção dos dentistas a respeito do incentivo e apoio organizacional para adoção das PP. CONCLUSÃO: Clima de segurança insatisfatório, onde a percepção do dentista sobre a segurança de seu ambiente de trabalho é deficiente, evidenciando ações gerenciais de apoio à segurança fragilizadas, falta de um programa de treinamento em saúde ocupacional e deficiência do feedback para favorecer a adoção de práticas seguras.OBJECTIVE: Check the perception of dentists about safety climate at work in relation to adherence to standard precautions. METHODS: It is a quantitative, cross-sectional study conducted through the application of the Safety Climate Scale to a population of 224 dentists who worked in units of primary health care in six municipalities of Paraná. RESULTS: The total score of 3.43 (SD = 0.88 reveals that dentists have a poor perception of the incentives and organizational support for adopting standard precautions. CONCLUSION: Unsatisfactory safety climate, where the perception of dentists about safety in their work environment is deficient, demonstrating fragile management actions of support to safety, lack of a training program in occupational health and deficient feedback to favor the adoption of safe practices.

Infection control and practice of standard precautions among healthcare workers in northern Nigeria

Directory of Open Access Journals (Sweden)

O E Amoran

2013-01-01

patients′ care products, 12.6% reported wash their hand before wearing the gloves, 10.7% washed hands after removal of gloves, and 72.4% changed gloves after each patient. Only 3.3% had a sharp disposal system in their various workplaces. Majority (98.6% of the respondents reported that the major reason for noncompliance to universal precautions is the nonavailability of the equipments. There was a statistically significant difference in the practice of standard precaution among those that were exposed to blood products and body fluid compared to those that had not been exposed in the last 6 months (c2 = 3.96, P = 0.03, public healthcare providers when compared to private health workers (c2 = 22.32, P = 0.001, among those working in secondary and tertiary facilities compared to primary healthcare centers (c2 = 14.64, P = 0.001 and urban areas when compared to rural areas (c2 = 4.06, P = 0.02. The only predictor of practice of standard precaution was exposure to blood and body fluid in the last 6 months odds ratio (OR = 4.56 (confidence interval (CI = 1.00-21.28. Conclusions: This study implies that inadequate workers′ knowledge and environment related problems, including the lack of protective materials and other equipments and utilities required to ensure safety of HCWs is a crucial issue that need urgent attention. Institution of a surveillance system for hospital acquired infection to improve consistent use of standard precautions among health workers is recommended in Nigeria and other low income countries in Africa.

Cocoa Farmers’ Compliance with Safety Precautions in Spraying Agrochemicals and Use of Personal Protective Equipment (PPE in Cameroon

Directory of Open Access Journals (Sweden)

Abayomi Samuel Oyekale

2018-02-01

Full Text Available The inability of farmers to comply with essential precautions in the course of spraying agrochemicals remains a policy dilemma, especially in developing countries. The objectives of this paper were to assess compliance of cocoa farmers with agrochemical safety measures, analyse the factors explaining involvement of cocoa farmers in the practice of reusing agrochemical containers and wearing of personal protective equipment (PPE. Data were collected with structured questionnaires from 667 cocoa farmers from the Centre and South West regions in Cameroon. Data analyses were carried out with Probit regression and Negative Binomial regression models. The results showed that average cocoa farm sizes were 3.55 ha and 2.82 ha in South West and Centre regions, respectively, and 89.80% and 42.64% complied with manufacturers’ instructions in the use of insecticides. Eating or drinking while spraying insecticides and fungicides was reported by 4.20% and 5.10% of all farmers in the two regions, respectively. However, 37.78% and 57.57% of all farmers wore hand gloves and safety boots while spraying insecticides in the South West and Centre regions of Cameroon, respectively. In addition, 7.80% of all the farmers would wash agrochemical containers and use them at home, while 42.43% would wash and use them on their farms. Probit regression results showed that probability of reusing agrochemical containers was significantly influenced (p < 0.05 by region of residence of cocoa farmers, gender, possession of formal education and farming as primary occupation. The Negative Binomial regression results showed that the log of number PPE worn was significantly influenced (p < 0.10 by region, marital status, attainment of formal education, good health, awareness of manufacturers’ instructions, land area and contact index. It was among others concluded that efforts to train farmers on the need to be familiar with manufacturers’ instructions and use PPE would enhance

Machine and Woodworking Tool Safety. Module SH-24. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on machine and woodworking tool safety is one of 50 modules concerned with job safety and health. This module discusses specific practices and precautions concerned with the efficient operation and use of most machine and woodworking tools in use today. Following the introduction, 13 objectives (each keyed to a page in the…

Universal isolation precautions for patients at an academic hospital

OpenAIRE

Maziero,Vanessa Gomes; Vannuchi,Marli Terezinha Oliveira; Vituri,Dagmar Willamourius; Haddad,Maria do Carmo Lourenço; Tada,Cristiane Nakaya

2012-01-01

OBJECTIVE: To apply universal isolation precautions for patients at an academic hospital by a nursing team. METHODS: This descriptive and prospective study used data from advice service of quality control and nursing care that were gathered in observational reports of universal isolation precautions for patients admitted in two surgical inpatient units during 2008 and 2010. RESULTS: The mean general classification for both units was between desirable and adequate in the observational analysis...

Hand hygiene compliance in patients under contact precautions and in the general hospital population.

Science.gov (United States)

Almaguer-Leyva, Martín; Mendoza-Flores, Lidia; Medina-Torres, Ana Gabriela; Salinas-Caballero, Ana Gabriela; Vidaña-Amaro, Jose Antonio; Garza-Gonzalez, Elvira; Camacho-Ortiz, Adrián

2013-11-01

Hand hygiene (HH) is the single most important intervention for preventing hospital-acquired infections. Contact precautions are a series of actions that infection control units take to reduce the transmission of nosocomial pathogens. We conducted an observational study of HH compliance. Observations were stratified as opportunities in patients under contact precautions and in the general hospital population. Trained infection control personnel performed all direct evaluations. A total of 3,270 opportunities were recorded. HH compliance was statistically higher in patients on contact precautions than in the overall population (70.3% vs 60.4%; P = .0001). Critical care areas had higher HH compliance when patients were isolated by contact precautions. Medical wards were statistically lower in HH when patients were under contact precautions. Respiratory technicians had the highest HH compliance in both overall performance and in patients under contact precautions. Medical students had a lower HH compliance in both evaluations (P Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

The practical of precaution/isolation from the medical diagnosis in infectious disease unit

Directory of Open Access Journals (Sweden)

Rosely Moralez de Figueiredo

2006-12-01

Full Text Available With the aim of analyzing the use of an infectious disease unit in a medium size general hospital, 95 patients records were examined; 72,6% of the patients were male; the average age was 41 and the average permanence in hospital was 15, 7 days. The death rate was 12,6%. The main medical diagnosis were AIDS in 52,4% and tuberculosis in 6,3% of patients. The speciality infectology was responsible for 35,8% of confinements. Regarding precautions for transmission 14,7% needed air precautions, 8,5% contact precautions, 1,1% droplets and the other 75,7% only standard precautions. A variety of criteria for confinement, not only the infectious nature of the disease, stands out in the unit; the generic term “isolation” is maintained in the records. Unification of the practical employed, education programs in service that aim at appropriation and the use of technical knowledge about precautions by the whole health team are advised.

Knowledge of nursing undergraduate students about the use of contact precautions measures

Directory of Open Access Journals (Sweden)

Julielen Salvador dos Santos

2013-12-01

Full Text Available Objective. To assess knowledge of nursing undergraduate students about the use of contact precautions. Methodology. There were 106 nursing undergraduate students from three universities within the state of Sao Paulo. The data collection was done between April and May 2012. A questionnaire was elaborated with questions assessing knowledge regarding contact precautions. The data were submitted to statistical procedures in the package MINITAB version 16. The knowledge were rated as adequate, partially adequate and inadequate. Results. There was a predominance of females (86% and age group between 20 and 29 years (70%. Regarding the definition of contact precaution of diseases in which these measures are used, undergraduate's knowledge was partially adequate (92% and 44%, respectively. The knowledge was considered adequate for the preventive measures used during assistance (86%. As difficulties mentioned in the use of these measures were discomfort, lack of material, personnel and time. Conclusion. Although undergraduate students know what measures to be used in contact precaution, they do not have adequate knowledge about which diseases they should use them. The three participating universities should reflect on the quality of training for nursing students regarding biosecurity and contact precautions.

Safety instruction for execution tasks involving ionizing radiations

International Nuclear Information System (INIS)

Fonseca, G.

1985-01-01

Basic directives are presented allow operations with ionizing radiations in industrial areas with high levels of safety. Contractual, technical, operational and administrative criteria are established for the safe performance of x-rays and gamographies and the use of fixed radiation based equipment (indicators of level, density, flow, etc) as well as precautions to be taken during project, procurement, transportation, assembly and maintenance of such equipment. Finally procedures are suggested for emergencies involving radioactive sources. (author)

The precaution principle in the human affairs management

International Nuclear Information System (INIS)

Godard, O.; Bourdeaux, I.; Dab, W.; Ewald, F.; Fabiani, J.L.; Gilbert, C.; Hermitte, M.A.; Hourcade, J.Ch.; Huber, G.; Laverie, M.; Martin, G.J.; Megie, G.; Pelegrin, J.; Reveret, J.P.; Weber, J.; Wynne, B.

1997-01-01

The precaution principle is applied in the example of The nuclear facilities in the United Kingdom, Windscale reactor and the Sellafield reprocessing plant. In the first case, an interpretation mistake in the behaviour of sediments in Irish Sea leads to a pollution by plutonium 239, and finally the admissible contamination of sediments became a possible ingestion of plutonium in atmosphere because of transport of this radioisotope from the sediments to the surface waters and then to atmosphere with this possibility of ingestion by man and ingestion is a more severe pollution than contamination. The second example is the difference of behaviour of Cesium 137 in front of acid soils or clayey soils, difference that the researchers did not see in United Kingdom around Sellafield plant but the Chernobyl accident brought to the fore this difference of behaviour. These examples proved if it was needed that scientific knowledge is uncomplete and consequently the precaution principle is highly required. Furthermore, the cases of the blood transfusion and the Aids virus, the impact on health of power lines and the ozone layer are also reviewed to enlight this precaution principle. (N.C.)

Assessment of biosafety precautions in Khartoum state diagnostic laboratories, Sudan

OpenAIRE

Elduma, Adel Hussein

2012-01-01

Background This study was conducted to evaluate the biosafety precautions that applied by diagnostic laboratories in Khartoum state, 2009. Methods A total number of 190 laboratories were surveyed about their compliance with standard biosafety precautions. These laboratories included 51 (27%) laboratories from government, 75 (39%) from private sectors and 64 (34%) laboratories belong to organization providing health care services. Results The study found that 32 (16.8%) of laboratories appoint...

Safety handbook

International Nuclear Information System (INIS)

1990-01-01

The purpose of the Australian Nuclear Science and Technology Organization's Safety Handbook is to outline simply the fundamental procedures and safety precautions which provide an appropriate framework for safe working with any potential hazards, such as fire and explosion, welding, cutting, brazing and soldering, compressed gases, cryogenic liquids, chemicals, ionizing radiations, non-ionising radiations, sound and vibration, as well as safety in the office. It also specifies the organisation for safety at the Lucas Heights Research Laboratories and the responsibilities of individuals and committees. It also defines the procedures for the scrutiny and review of all operations and the resultant setting of safety rules for them. ills

Factors influencing adherence to standard precautions among nursing professionals in psychiatric hospitals

Directory of Open Access Journals (Sweden)

Thaís Helena Piai-Morais

2015-06-01

Full Text Available OBJECTIVE Evaluate and correlate individual, work-related and organizational factors that influence adherence to standard precautions among nursing professionals of psychiatric hospitals in São Paulo. METHOD An exploratory cross-sectional study conducted with 35 nursing professionals, using the assessment tool for adherence to standard precautions through the Likert scale, ranging from 1 to 5. RESULTS Knowledge of the precautions received a high score (4.69; adherence received (3.86 and obstacles (3.78, while intermediaries and the scales of organizational factors received low scores (2.61. There was a strong correlation between the magnitude adherence scale and the personal protective equipment availability (r = 0.643; p = 0.000. The training scale for prevention of HIV exposure (p = 0.007 was statistically different between the nurses and nursing assistants. CONCLUSION The organizational factors negatively contributed to adherence to standard precautions, indicating that psychiatric institutions lack safe working conditions, ongoing training and management actions to control infections.

Suggestions on the Development of Safety Culture Assessment Method

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Kwang Sik; Kim, Woong Sik

2006-01-01

Several efforts have been made to assess safety culture of organization that operates nuclear power plants in Korea. The MOST and KINS played a major role to develop assessment methods and KHNP applied them to its NPPs. This paper explains the two methods developed by KINS briefly and presents the insights obtained from the two different applications. It concludes with some suggestions for safety culture assessment based on the insights

Fire protection and safety in working with sodium. Pt. 2

International Nuclear Information System (INIS)

Foerster, K.; Kremer, K.H.; Wolf, J.

1978-01-01

The use of sodium as a heat transfer medium in nuclear plant and the associated development of sodium technology caused the requirement for adapting fire and safety precautions to new conditions of dealing with this liquid. The comparison in the first part of this article of the properties of sodium with those of petrol clarified the different fire characteristics of sodium compared to many other combustible materials and the effects of fires which differ from conventional fires. Based on this, measures for fire precautions and for safety of personnel are introduced. (orig.) [de

[Healthcare professionals' knowledge, attitudes and practices in relation to standard hospital precautions].

Science.gov (United States)

Mandana Bambenongama, Norbert; Losimba Likwela, Joris

2013-01-01

The infectious risk in the healthcare setting is potentially ubiquitous. Several infectious agents may be transmitted to healthcare professionals, most of which are carried by blood and body fluids. The aim of this study was to assess knowledge, attitudes and practices of healthcare workers in delivery rooms and operating theatres about standard precautions in healthcare settings in order to deduce the actions to be implemented to improve their security. A descriptive cross-sectional survey was conducted in September 2011. A questionnaire was sent to 96 people using the direct interview technique. Only 20% of study subjects were familiar with the main bloodborne viruses (HBV, HCV and HIV). 67.8% of them considered that standard precautions must be applied only to women in labour and suspected HIV-positive patients. Almost all respondents (91.1%) had already been subject to at least one AES during the last 12 months. Respondents appeared to have a poor knowledge of the recommended actions following an AES. Recapping of needles after care is a practice reported by 55.6% of respondents. Routine use of protective barriers is unsatisfactory. The frequent failure of systematic application of standard precautions in healthcare settings by healthcare workers in the city of Isiro should lead the Ministry of Health to implement a process designed to increase awareness about standard precautions and improve the equipment necessary for strict compliance with these precautions.

RISK MANAGEMENT AND EXPERTISE: Biotechnology Risk Regulation in Europe: Linking Precaution with Sustainable Development

Directory of Open Access Journals (Sweden)

Levidow Les

2000-07-01

Full Text Available In the risk debate over genetically modified (GM crops, their status as ‘‘environmentally-friendly products’’ has been controversial. The 1990 precautionary legislation of the European Union was designed to anticipate potential harm from GMOs in advance. Yet the acceptability of harm - or even its definition - has been contentious in evaluating commercial products. The legislation has been interpreted in ways which implicitly link concepts of precaution and ‘‘sustainable development’’. In the mid-1990s risk regulation, the European Union framed ‘‘risk’’ within a commitment to intensive agriculture. Its familiar hazards were accepted as a normal baseline for evaluating the effects of GM crops. The regulatory procedure regarded choices of crop protection measures as irrelevant or interchangeable, and therefore regarded some future options as dispensible, regardless of whether they would be environmentally preferable. At least implicitly, safety claims presupposed environmental advantages of GM crops in reducing agrochemical usage. That risk-framing came under challenge from widespread protest and expert disagreements. In response, some governments applied more precautionary measures. They broadened the definition of the ‘‘adverse effects’’ which must be avoided, devised market-stage precautions for such effects, and increased the burden of evidence for demonstrating safety. Soon the EU-wide procedure began to formalize such approaches. In the contested definitions of relevant harm, there are deeper issues about the sort of environment which should be protected, sustained or created. Thus GM crops have become a test case for environmental norms, within a broader debate about how to construct a sustainable agriculture.

Communication interventions to improve adherence to infection control precautions: a randomised crossover trial.

Science.gov (United States)

Ong, Mei-Sing; Magrabi, Farah; Post, Jeffrey; Morris, Sarah; Westbrook, Johanna; Wobcke, Wayne; Calcroft, Ross; Coiera, Enrico

2013-02-06

Ineffective communication of infection control requirements during transitions of care is a potential cause of non-compliance with infection control precautions by healthcare personnel. In this study, interventions to enhance communication during inpatient transfers between wards and radiology were implemented, in the attempt to improve adherence to precautions during transfers. Two interventions were implemented, comprising (i) a pre-transfer checklist used by radiology porters to confirm a patient's infectious status; (ii) a coloured cue to highlight written infectious status information in the transfer form. The effectiveness of the interventions in promoting adherence to standard precautions by radiology porters when transporting infectious patients was evaluated using a randomised crossover trial at a teaching hospital in Australia. 300 transfers were observed over a period of 4 months. Compliance with infection control precautions in the intervention groups was significantly improved relative to the control group (p group was 38%. Applying the coloured cue resulted in a compliance rate of 73%. The pre-transfer checklist intervention achieved a comparable compliance rate of 71%. When both interventions were applied, a compliance rate of 74% was attained. Acceptability of the coloured cue was high, but adherence to the checklist was low (40%). Simple measures to enhance communication through the provision of a checklist and the use a coloured cue brought about significant improvement in compliance with infection control precautions by transport personnel during inpatient transfers. The study underscores the importance of effective communication in ensuring compliance with infection control precautions during transitions of care.

Standard precaution knowledge and adherence: Do Doctors differ ...

African Journals Online (AJOL)

document that health workers often fail to practice standard precautions ... and laboratory services have remained a major health issue .... Similarly, Safe injection practices were ..... Enablers: Situations which make the worker comply with SP.

Quantitative criteria in the application of the principle of precaution

International Nuclear Information System (INIS)

Touzet, Rodolfo; Ferrari, Jorge

2008-01-01

Full text: The Principle of Precaution establishes that 'when an activity represents a threat or damage for the human health or the environment, it is necessary to take measurements of precaution even when it could not have demonstrated the cause-effect relationship in a scientific and conclusive form'. This declaration implies acting even in presence of uncertainty, deriving the responsibility and the safety to who creates the risk, to analyze the possible alternatives and to use participate methods to take decisions. This presents practically two dilemmas: 1) How to perform a cost-benefit analysis when the relation cause-effect is not even established for the health of the exposed persons? (In case of ionizing radiations a factor α is in use, that represents the economic cost of the dose received by a person); 2) Which criterion must to be used in case of ionizing radiation act synergically with non ionizing radiation? How to integrate the quantitative optimization criterion with a qualitative criterion of precaution?. It will have to appear some temporary hypotheses in order to be able to perform the quantitative corresponding evaluations. In case of the low frequencies the situation was exactly the same in the past; but the epidemiological studies as well as the experiments in vivo and in vitro demonstrated that the exposure can increase the risk of leukaemia in children and induce other problems of health in children and adults. A temporary possible hypothesis for radio frequency is to assume that the effects are similar in magnitude to the ones caused for the fields of low frequency. In this case it is possible to demonstrate that if this was really like that the statistics would not allow to demonstrate it even due to the persons' quantity and the times used in the studied populations and the times of latency of the leukaemia. The use of some hypothesis of work to perform the cost - benefit studies allow us to establish different alternatives for the

Sex education sources and attitudes toward sexual precautions across a decade.

Science.gov (United States)

Guthrie, Mandy L; Bates, Larry W

2003-04-01

75 college students responded to Moore and Barling's AIDS questionnaire. Coopersmith's Self-esteem Inventory, and a background survey regarding sex education and sexual and religious activity. The most commonly reported sources of sex education were peers, parents, and high school courses, respectively. Ratings of the most important of 10 potential sources of sex education included peers, high school courses, and religious institutions, respectively. None of these were significantly correlated with future condom use. Virgins reported more open communication with parents about sex. Sexual experience was positively related to more confusion about sexual precautions but negatively related to foreclosed attitudes toward such precautions. Some types of religious involvement (church attendance and campus religious organization membership) were related to foreclosed attitudes. Data in attitudinal and sex education were compared with data collected in 1991. Although students more frequently reported having received sex education in 2000, their attitudes toward utilizing sexual precautions have become somewhat more diffused.

Knowledge of nursing undergraduate students about the use of contact precautions measures

OpenAIRE

Julielen Salvador dos Santos; Ione Corrêa; Manoel Henrique Salgado

2013-01-01

Objective. To assess knowledge of nursing undergraduate students about the use of contact precautions. Methodology. There were 106 nursing undergraduate students from three universities within the state of Sao Paulo. The data collection was done between April and May 2012. A questionnaire was elaborated with questions assessing knowledge regarding contact precautions. The data were submitted to statistical procedures in the package MINITAB version 16. The knowledge were rated as adequate, par...

12 CFR 555.210 - What precautions must I take?

Science.gov (United States)

2010-01-01

... precautions must I take? If you use electronic means and facilities under this subpart, your management must: (a) Identify, assess, and mitigate potential risks and establish prudent internal controls; and (b...

Driving with diabetes: precaution, not prohibition, is the proper approach.

Science.gov (United States)

Kohrman, Daniel B

2013-03-01

Safety issues posed by driving with diabetes are primarily related to severe hypoglycemia, yet some public authorities rely on categorical restrictions on drivers with diabetes. This approach is misguided. Regulation of all drivers with diabetes, or all drivers using insulin, ignores the diversity of people with diabetes and fails to focus on the subpopulation posing the greatest risk. Advances in diabetes care technology and understanding of safety consequences of diabetes have expanded techniques available to limit risks of driving with diabetes. New means of insulin administration and blood glucose monitoring offer greater ease of anticipating and preventing hypoglycemia, and thus, limit driving risk for persons with diabetes. So too do less sophisticated steps taken by people with diabetes and the health care professionals they consult. These include adoption and endorsement of safety-sensitive behaviors, such as testing before a drive and periodic testing on longer trips. Overall, and in most individual cases, driving risks for persons with diabetes are less than those routinely tolerated by our society. Examples include freedom to drive in dangerous conditions and lax regulation of drivers in age and medical cohorts with elevated overall rates of driving mishaps. Data linking specific diabetes symptoms or features with driving risk are quite uncertain. Hence, there is much to recommend: a focus on technological advances, human precautions, and identifying individuals with diabetes with a specific history of driving difficulty. By contrast, available evidence does not support unfocused regulation of all or most drivers with diabetes. © 2013 Diabetes Technology Society.

Universal precautions in Central Asia: the need for multiple strategies in this window of opportunity.

Science.gov (United States)

Nugmanova, Z; Patel, N; Nurbakhyt, A; Akhmetova, G M; Kovtunenko, N; Trumova, Z; McNutt, L-A

2015-03-01

Adoption of universal precautions remains a global concern. In low- and middle-income countries, the problem is exacerbated by a shortage of protective supplies, lack of training among clinicians, and an expanding human immunodeficiency virus (HIV) epidemic. To describe the perceptions of medical students about the risk of HIV and use of universal precautions, and to identify recent exposures to blood or bodily fluids. A cross-sectional study was conducted among Kazakh medical students taking a newly-implemented infection control course in 2013. Participants completed a survey to investigate the use of precautions and exposures to blood or bodily fluids. Attitudes towards HIV were explored. Bivariate analyses identified factors related to attitudes about universal precautions, and self-reported behaviours and exposures. Half (49.6%) of the 785 participants expressed 'a lot of concern' about contracting HIV while caring for patients, and 40.5% of students thought that physicians sometimes refuse to treat HIV-positive patients due to a fear of contracting HIV. Regarding precautions, only half (51.5%) of the students reported that they always use gloves, and even fewer reported that they always use masks or eye protection. Exposure to contaminated blood or bodily fluids was reported by 10.1% of respondents. The findings underscore the urgent need for interventions to improve universal precautions and reduce the fear of infectious diseases. Perhaps even more concerning, these data may underestimate the true magnitude of the problem given cultural impediments to transparency. Copyright © 2015 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Assessment of biosafety precautions in Khartoum state diagnostic ...

African Journals Online (AJOL)

Background: This study was conducted to evaluate the biosafety precautions that applied by diagnostic laboratories in Khartoum state, 2009. Methods: A total number of 190 laboratories were surveyed about ... Sharp disposable containers were found in 84 (44.2%). Fire alarm system was found in 2 (1.1%) laboratories, fire ...

A holistic view on Safety Management

DEFF Research Database (Denmark)

Jørgensen, Kirsten

to prevent accidents is to identify the risks in all kinds of situations and take precautions by establishing safety barriers either technically or by improving the processes involved in managing these barriers, as well as bringing about behavioral improvements through good leadership. A project initiated...

Safety of nuclear installations

International Nuclear Information System (INIS)

1991-01-01

In accordance with the Nuclear Energy Act, a Licence may only be issued if the precautions required by the state of the art have been taken to prevent damage resulting from the construction and operation of the installation. The maximum admissible body doses in the area around the installation which must be observed in planning constructional and other technical protective measures to counter accidents in or at a nuclear power station (accident planning values, are established). According to the Radiological Protection Ordinance the Licensing Authority can consider these precautions to have been taken if, in designing the installation against accidents, the applicant has assumed the accidents which, according to the Safety Criteria and Guidelines for Nuclear Power Stations published in the Federal Register by the Federal Minister of the Interior after hearing the competent senior state authorities, must determine the design of a nuclear power station. On the basis of previous experience from safety analysis, assessment and operation of nuclear power stations, the accident guidelines published here define which accidents are determinative for the safety-related design of PWR power stations and what verification -particularly with regard to compliance with the accident planning values of the Radiological Protection Ordinance -must be provided by the applicant. (author)

Poor compliance with standard precautions against infections during minor gynaecological procedures.

Science.gov (United States)

Maharaj, Dushyant; Lawton, Beverley; Garrett, Sue

2012-06-01

Splash injuries occurring during minor surgical procedures are associated with a significant infective risk to the operator. It is a common misconception that minor operations carry low risks. To determine the prevalence of the practice of Standard Precautions by medical staff in the obstetric and gynaecology (O & G) units of two hospitals in New Zealand, and to assess self-observed splash injury rates. A cross-sectional survey of all doctors working in the O & G units of two public hospitals servicing a population of 435 000. A self-administered questionnaire was provided to 43 doctors with questions related to the use of Standard Precautions, perceived likelihood of infection from a splash and splash injuries sustained during procedures. The response rate was 76.6% (n = 33/43). Of the respondents, only 30.3% (n = 10) used Standard Precautions during minor procedures. Sixty-four per cent (n = 21) routinely used goggles/visor for eye protection. Forty-five per cent (n = 15) thought they were likely to get an infection from a splash, and 55% (n = 18) of clinicians had experienced a splash injury. Of the minor procedures during which splash injuries had occurred, repair of episiotomy 45.8% (n = 11) was the commonest. This survey shows poor compliance with guidelines for Standard Precautions to protect from infection despite self-reported rates of splash injury being high at 55%. Effective interventions are needed to increase compliance and prevent infection. © 2012 The Authors ANZJOG © 2012 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Safety Management at PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Ligam, A.S.; Zarina Masood; Ahmad Nabil Abdul Rahim

2011-01-01

Adequate safety measures and precautions, which follow relevant safety standards and procedures, should be in place so that personnel safety is assured. Nevertheless, the public, visitor, contractor or anyone who wishes to enter or be in the reactor building should be well informed with the safety measures applied. Furthermore, these same elements of safety are also applied to other irradiation facilities within the premises of Nuclear Malaysia. This paper will describes and explains current safety management system being enforced especially in the TRIGA PUSPATI Reactor (RTP) namely radiation monitoring system, safety equipment, safe work instruction, and interconnected internal and external health, safety and security related departments. (author)

Compliance to Occupational Safety Measures among the Paramedical Workers in a Tertiary Hospital in Karnataka, South India

Directory of Open Access Journals (Sweden)

P Phukan

2014-01-01

Full Text Available Background: The guidelines for minimizing occupational health risk from exposure to highly infectious diseases is already established but little information exists on the compliance of these measures among paramedical workers in India. Objective: To study the awareness of occupational safety measures such as universal precautions, biomedical waste handling, disposal and its compliance in their daily practice. Methods: A hospital-based cross-sectional study was undertaken in a tertiary private hospital in Karnataka, Bangalore, India. Data was collected using a pretested and predesigned proforma from 120 respondents: 85 nurses and 35 laboratory technicians. Results: 27 (32% nurses and 20 (57% laboratory technicians could relate universal precautions to infection prevention. Only 6 (7% nurses and 2 (6% technicians had knowledge about proper hospital waste segregation. 45 (52.9% nurses and 15 (42.8% technicians had knowledge about post-exposure prophylaxis. 3 (4% nurses and 9 (26% technicians were formally trained in following universal precautions. Adequate hand washing was practiced among 17 (20% nurses and none of the technicians. Faulty practice such as recapping of needle was prevalent among 57 (67% nurses and 29 (83% technicians. 32 (38% nurses and 10 (29% technicians received hepatitis B vaccine. Conclusion: As knowledge and practice regarding different aspects of universal precautions was not satisfactory, training was warranted urgently in the study population. Also, suggestions were made to develop and implement institutional policies on the universal precautions and ensuring supply of personal protection equipment.

Planning and architectural safety considerations in designing nuclear power plants

International Nuclear Information System (INIS)

Konsowa, Ahmed A.

2009-01-01

To achieve optimum safety and to avoid possible hazards in nuclear power plants, considering architectural design fundamentals and all operating precautions is mandatory. There are some planning and architectural precautions should be considered to achieve a high quality design and construction of nuclear power plant with optimum safety. This paper highlights predicted hazards like fire, terrorism, aircraft crash attacks, adversaries, intruders, and earthquakes, proposing protective actions against these hazards that vary from preventing danger to evacuating and sheltering people in-place. For instance; using safeguards program to protect against sabotage, theft, and diversion. Also, site and building well design focusing on escape pathways, emergency exits, and evacuation zones, and the safety procedures such as; evacuation exercises and sheltering processes according to different emergency classifications. In addition, this paper mentions some important codes and regulations that control nuclear power plants design, and assessment methods that evaluate probable risks. (author)

Safety concerns and suggested design approaches to the HTGR Reformer process concept

Energy Technology Data Exchange (ETDEWEB)

Green, R.C.

1981-09-01

This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept.

Safety concerns and suggested design approaches to the HTGR Reformer process concept

International Nuclear Information System (INIS)

Green, R.C.

1981-09-01

This report is a safety review of the High Temperature Gas-Cooled Reactor Reformer Application Study prepared by Gas-Cooled Reactor Associates (GCRA) of La Jolla, California. The objective of this review was to identify safety concerns and suggests design approaches to minimize risk in the High Temperature Gas-Cooled Reactor Reformer (HTGR-R) process concept

Evaluation of Conceptual Frameworks Applicable to the Study of Isolation Precautions Effectiveness

Science.gov (United States)

Crawford, Catherine; Shang, Jingjing

2015-01-01

Aims A discussion of conceptual frameworks applicable to the study of isolation precautions effectiveness according to Fawcett and DeSanto-Madeya’s (2013) evaluation technique and their relative merits and drawbacks for this purpose Background Isolation precautions are recommended to control infectious diseases with high morbidity and mortality, but effectiveness is not established due to numerous methodological challenges. These challenges, such as identifying empirical indicators and refining operational definitions, could be alleviated though use of an appropriate conceptual framework. Design Discussion paper Data Sources In mid-April 2014, the primary author searched five electronic, scientific literature databases for conceptual frameworks applicable to study isolation precautions, without limiting searches by publication date. Implications for Nursing By reviewing promising conceptual frameworks to support isolation precautions effectiveness research, this paper exemplifies the process to choose an appropriate conceptual framework for empirical research. Hence, researchers may build on these analyses to improve study design of empirical research in multiple disciplines, which may lead to improved research and practice. Conclusion Three frameworks were reviewed: the epidemiologic triad of disease, Donabedian’s healthcare quality framework and the Quality Health Outcomes model. Each has been used in nursing research to evaluate health outcomes and contains concepts relevant to nursing domains. Which framework can be most useful likely depends on whether the study question necessitates testing multiple interventions, concerns pathogen-specific characteristics and yields cross-sectional or longitudinal data. The Quality Health Outcomes model may be slightly preferred as it assumes reciprocal relationships, multi-level analysis and is sensitive to cultural inputs. PMID:26179813

UK survey of occupational therapist's and physiotherapist's experiences and attitudes towards hip replacement precautions and equipment.

Science.gov (United States)

Smith, T O; Sackley, C M

2016-05-25

Total hip replacement (THR) is one of the most common orthopaedic procedures in the United Kingdom (UK). Historically, people following THR have been provided with hip precautions and equipment such as: raised toilet seats and furniture rises, in order to reduce the risks of dislocation post-operation. The purpose of this study was to determine current practices in the provision of these interventions in the UK for people following primary THR. A 27-question, self-administered online survey was developed and distributed to UK physiotherapists and occupational therapists involved in the management of people following primary THR (target respondents). The survey included questions regarding the current practices in the provision of equipment and hip precautions for THR patients, and physiotherapist's and occupational therapist's attitudes towards these practices. The survey was disseminated through print and web-based/social media channels. 170 health professionals (87 physiotherapists and 83 occupational therapists), responded to the survey. Commonly prescribed equipment in respondent's health trusts were raised toilet seats (95 %), toilet frames and rails (88 %), furniture raises (79 %), helping hands/grabbers (77 %), perching stools (75 %) and long-handled shoe horns (75 %). Hip precautions were routinely prescribed by 97 % of respondents. Hip precautions were most frequently taught in a pre-operative group (52 % of respondents). Similarly equipment was most frequently provided pre-operatively (61 % respondents), and most commonly by occupational therapists (74 % respondents). There was variability in the advice provided on the duration of hip precautions and equipment from up to 6 weeks post-operatively to life-time usage. Current practice on hip precautions and provision of equipment is not full representative of clinician's perceptions of best care after THR. Future research is warranted to determine whether and to whom hip precautions and equipment

Assessment of biosafety precautions in Khartoum state diagnostic laboratories, Sudan.

Science.gov (United States)

Elduma, Adel Hussein

2012-01-01

This study was conducted to evaluate the biosafety precautions that applied by diagnostic laboratories in Khartoum state, 2009. A total number of 190 laboratories were surveyed about their compliance with standard biosafety precautions. These laboratories included 51 (27%) laboratories from government, 75 (39%) from private sectors and 64 (34%) laboratories belong to organization providing health care services. The study found that 32 (16.8%) of laboratories appointed biosafety officers. Only, ten (5.2%) participated in training about response to fire emergency, and 28 (14.7%) reported the laboratory accident occurred during work. 45 (23.7%) laboratories had a written standard operation procedures (SOPs), and 35 (18.4%) had written procedures for the lean-up of spills. Moreover, biosafety cabinet was found in 11 (5.8%) laboratories, autoclave in 28 (14.7%) and incinerator in only two (1.1%) laboratories. Sharp disposable containers were found in 84 (44.2%). Fire alarm system was found in 2 (1.1%) laboratories, fire extinguisher in 39 (20.5%) laboratories, and fire emergency exit found in 14 (7.4%) laboratories. Furthermore, 19 (10%) laboratories had a hepatitis B virus vaccination programme, 5 (6.2%) applied BCG vaccine, and 2 (1.1%0) vaccinated the staff against influenza. The study concluded that the standards biosafety precautions adopted by the diagnostic laboratories in Khartoum state was very low. Further, the laboratory personnel awareness towards biosafety principles implementation was very low too.

Looking for evidence that personal hygiene precautions prevent traveler's diarrhea.

Science.gov (United States)

Shlim, David R

2005-12-01

In the 50 years during which traveler's diarrhea has been studied, it has always been assumed that personal hygiene precautions can prevent or reduce the likelihood of developing traveler's diarrhea. However, 7 of 8 studies that specifically addressed this issue showed no correlation between the types of food selected and the risk of acquiring traveler's diarrhea. The eighth study showed a correlation between a few dietary mistakes and a decreased risk of acquiring traveler's diarrhea. A further increase in the number of dietary mistakes, however, did not continue to increase the risk of acquiring traveler's diarrhea. Personal hygiene precautions, when performed under the direct supervision of an expatriate operating his or her own kitchen, can prevent traveler's diarrhea, but poor restaurant hygiene in most developing countries continues to create an insurmountable risk of acquiring traveler's diarrhea.

Operation safety of complex industrial systems

International Nuclear Information System (INIS)

Zwingelstein, G.

1999-01-01

Zero fault or zero risk is an unreachable goal in industrial activities like nuclear activities. However, methods and techniques exist to reduce the risks to the lowest possible and acceptable level. The operation safety consists in the recognition, evaluation, prediction, measurement and mastery of technological and human faults. This paper analyses each of these points successively: 1 - evolution of operation safety; 2 - definitions and basic concepts: failure, missions and functions of a system and of its components, basic concepts and operation safety; 3 - forecasting analysis of operation safety: reliability data, data-banks, precautions for the use of experience feedback data; realization of an operation safety study: management of operation safety, quality assurance, critical review and audit of operation safety studies; 6 - conclusions. (J.S.)

Improving adherence to Standard Precautions for the control of health care-associated infections.

Science.gov (United States)

Moralejo, Donna; El Dib, Regina; Prata, Rafaela A; Barretti, Pasqual; Corrêa, Ione

2018-02-26

'Standard Precautions' refers to a system of actions, such as using personal protective equipment or adhering to safe handling of needles, that healthcare workers take to reduce the spread of germs in healthcare settings such as hospitals and nursing homes. To assess the effectiveness of interventions that target healthcare workers to improve adherence to Standard Precautions in patient care. We searched CENTRAL, MEDLINE, Embase, CINAHL, LILACS, two other databases, and two trials registers. We applied no language restrictions. The date of the most recent search was 14 February 2017. We included randomised trials of individuals, cluster-randomised trials, non-randomised trials, controlled before-after studies, and interrupted time-series studies that evaluated any intervention to improve adherence to Standard Precautions by any healthcare worker with responsibility for patient care in any hospital, long-term care or community setting, or artificial setting, such as a classroom or a learning laboratory. Two review authors independently screened search results, extracted data from eligible trials, and assessed risk of bias for each included study, using standard methodological procedures expected by Cochrane. Because of substantial heterogeneity among interventions and outcome measures, meta-analysis was not warranted. We used the GRADE approach to assess certainty of evidence and have presented results narratively in 'Summary of findings' tables. We included eight studies with a total of 673 participants; three studies were conducted in Asia, two in Europe, two in North America, and one in Australia. Five studies were randomised trials, two were cluster-randomised trials, and one was a non-randomised trial. Three studies compared different educational approaches versus no education, one study compared education with visualisation of respiratory particle dispersion versus education alone, two studies compared education with additional infection control support versus

Knowledge, awareness and compliance with universal precautions among health care workers at the University Hospital of the West Indies, Jamaica.

Science.gov (United States)

Vaz, K; McGrowder, D; Alexander-Lindo, R; Gordon, L; Brown, P; Irving, R

2010-10-01

Universal precautions are not well understood or implemented by health care practitioners, though crucial in the prevention and transmission of blood-borne pathogens like HIV. To assess knowledge, awareness and compliance of universal precautions among health care workers at the University Hospital of the West Indies, Jamaica. A cross-sectional survey was conducted in September and October 2007. A 28-item self-administered questionnaire was provided to 200 health care workers including medical doctors, medical technologists, nurses and porters to assess their knowledge, awareness and practice towards universal precautions. Almost two-thirds (64.0%) of the respondents were very knowledgeable of universal precautions with significantly more females (75.4%) than males (42.9%) (p<0.0001). More nurses (90.0%), medical doctors (88.0%) and medical technologists (70%) were very knowledgeable of universal precautions (p<0.0001). More respondents (92.9%) who were employed in the health sector for 16 years and over reported high levels of awareness of universal precautions than those who were employed for less than five years (p<0.0001). 28.6% of males and only 6.2% of females reported that they do not use protective gear. More nurses reported frequent use of protective equipment followed by medical technologists and medical doctors (p<0.0001). There was adequate knowledge and a fair level of awareness among medical doctors, medical technologists, and nurses towards universal precautions.

STANDARD PRECAUTIONS: AN ASSESSMENT OF AWARENESS AMONG HEALTH CARE PERSONNEL IN A TEACHING HOSPITAL, SOUTH INDIA.

Directory of Open Access Journals (Sweden)

Sangeetha

2015-02-01

Full Text Available BACKGROUND : Standard precautions ar e crucial in the prevention and transmission of Healthcare associated infections ( HAI and transmission of blood - borne pathogens like Hepatitis B, Human Immunodeficiency Virus & Hepatitis C. They are not well u nderstood or implemented by health care practitioners. Hence this study was taken up to determine and compare knowledge, attitude of standard precautions among health care personnel at a teaching hospital, Bangalore. OBJECTIVE : To assess knowledge, attitud e, practices and compliance of Standard precautions among health care workers at a teaching hospital. METHODOLOGY : One hundred and fifty seven health care personnel participated in this study. A pretest and post test was administered to the study group. A pre - structured questionnaire on standard precautions was prepared which included knowledge, attitude and practices. RESULTS : 116 ( 73.88% nurses had knowledge about hand hygiene, but only 82 ( 52.2% nurses practiced hand hygiene before and after patient care. Knowledge about PPE measures like gloves, face mask & goggles, gowns were known to 101(64.33%, 56 ( 35.66% & 69 ( 43.94% nurses respectively. 117 ( 74.52% nurses discarded needles & sharps in correct puncture proof containers, but their correct knowled ge regarding colour coding of hospital waste segregation was comparatively less i.e. 104 ( 66.24%. 119 ( 75.79% of the nurses had practice of recapping the needles after use. CONCLUSION : There was significant improvement in the knowledge and practice of stan dard precautions in the present study after incorporating good training practices

Safety aspects of nuclear power stations

International Nuclear Information System (INIS)

Binner, W.

1980-01-01

Psychological aspects of the fear of nuclear power are discussed, cancer deaths due to a nuclear accident are predicted and the need for nuclear accident prevention is stressed. A simplified analysis of the safety precautions in a generalised nuclear power station is offered, with reference to loss-of-coolant incidents, and developments in reactor design for fail-safe modes are explained. The importance of learning from the Three Mile Island incident is noted and failure statistics are presented. Tasks to be undertaken at the Austrian Zwentendorf nuclear power station are listed, including improved quality control and acoustic detectors. Precautions against earthquakes are also discussed and it is stated that safe operation of the Zwentendorf station will be achieved. (G.M.E.)

Knowledge, Awareness and Compliance with Universal Precautions among Health Care Workers at the University Hospital of the West Indies, Jamaica

Directory of Open Access Journals (Sweden)

K Vaz

2010-09-01

Full Text Available Background: Universal precautions are not well understood or implemented by health care practitioners, though crucial in the prevention and transmission of blood-borne pathogens like HIV. Objective: To assess knowledge, awareness and compliance of universal precautions among health care workers at the University Hospital of the West Indies, Jamaica. Method: A cross-sectional survey was conducted in September and October 2007. A 28-item self-administered questionnaire was provided to 200 health care workers including medical doctors, medical technologists, nurses and porters to assess their knowledge, awareness and practice towards universal precautions. Results: Almost two-thirds (64.0% of the respondents were very knowledgeable of universal precautions with significantly more females (75.4% than males (42.9% (p<0.0001. More nurses (90.0%, medical doctors (88.0% and medical technologists (70% were very knowledgeable of universal precautions (p<0.0001. More respondents (92.9% who were employed in the health sector for 16 years and over reported high levels of awareness of universal precautions than those who were employed for less than five years (p<0.0001. 28.6% of males and only 6.2% of females reported that they do not use protective gear. More nurses reported frequent use of protective equipment followed by medical technologists and medical doctors (p<0.0001. Conclusions: There was adequate knowledge and a fair level of awareness among medical doctors, medical technologists, and nurses towards universal precautions.

Fire Safety. Managing School Facilities, Guide 6.

Science.gov (United States)

Department for Education and Employment, London (England). Architects and Building Branch.

This booklet discusses how United Kingdom schools can manage fire safety and minimize the risk of fire. The guide examines what legislation school buildings must comply with and covers the major risks. It also describes training and evacuation procedures and provides guidance on fire precautions, alarm systems, fire fighting equipment, and escape…

Activity assays and immunoassays for plasma Renin and prorenin: information provided and precautions necessary for accurate measurement

DEFF Research Database (Denmark)

Campbell, Duncan J; Nussberger, Juerg; Stowasser, Michael

2009-01-01

into focus the differences in information provided by activity assays and immunoassays for renin and prorenin measurement and has drawn attention to the need for precautions to ensure their accurate measurement. CONTENT: Renin activity assays and immunoassays provide related but different information...... provided by these assays and of the precautions necessary to ensure their accuracy....

The effect of police on crime, disorder and victim precaution

NARCIS (Netherlands)

Vollaard, B.A.; Koning, P.W.C.

2009-01-01

Using individual data from a large-scale Dutch crime victimization survey, we are able to expand the analysis of the effect of police on crime to crimes types that do not easily find their way into police statistics, and to public disorder and victim precaution. To address heterogeneity and

Radiation safety in Australia's mineral sands industry

International Nuclear Information System (INIS)

Hughes, W.

1989-06-01

This brochure is part of a training package aiming to explain in simple terms what radiation is, how it affects people's lives and how, in the specific case of the mineral sand industry, the risk of ill-effects from low-level radioactivity could be effectively guarded against by simple and easily followed safety precautions. ills

48 CFR 3036.570 - Special precautions for work at operating airports.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Special precautions for work at operating airports. 3036.570 Section 3036.570 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY ACQUISITION REGULATION (HSAR) SPECIAL CATEGORIES OF...

Safety evaluation of a conceptual fuel recycle complex

International Nuclear Information System (INIS)

Hodges, M.E.

1980-01-01

A conceptual design integration study for an integrated Fuel Recycle Complex (FRC) has been completed. A safety evaluation of the radiation shielding, fire precautions, handling of nonradioactive hazardous materials, criticality hazards, operating errors, and the influence of natural phenomena on the FRC shows that all federal regulations are met or exceeded

Management of sternal precautions following median sternotomy by physical therapists in Australia: a web-based survey.

Science.gov (United States)

Tuyl, Lara J; Mackney, Jennifer H; Johnston, Catherine L

2012-01-01

Sternal precautions are utilized within many hospitals with the aim of preventing the occurrence of sternal complications (eg, infection, wound breakdown) following midline sternotomy. The evidence base for sternal precaution protocols, however, has been questioned due to a paucity of research, unknown effect on patient outcomes, and possible discrepancies in pattern of use among institutions. The objective of this study was to investigate and document the use of sternal precautions by physical therapists in the treatment of patients following median sternotomy in hospitals throughout Australia, from immediately postsurgery to discharge from the hospital. A cross-sectional, observational design was used. An anonymous, Web-based survey was custom designed for use in the study. The questionnaire was content validated, and the online functionality was assessed. The senior cardiothoracic physical therapist from each hospital identified as currently performing cardiothoracic surgery (N=51) was invited to participate. The response rate was 58.8% (n=30). Both public (n=18) and private (n=12) hospitals in all states of Australia were represented. Management protocols reported by participants included wound support (n=22), restrictions on lifting and transfers (n=23), and restrictions on mobility aid use (n=15). Factors influencing clinical practice most commonly included "workplace practices/protocols" (n=27) and "clinical experience" (n=22). Limitations The study may be limited by response bias. Significant variation exists in the sternal precautions and protocols used in the treatment of patients following median sternotomy in Australian hospitals. Further research is needed to investigate whether the restrictions and precautions used are necessary and whether protocols have an impact on patient outcomes, including rates of recovery and length of stay.

Radiation Safety (General) Regulations 1983 (Western Australia)

International Nuclear Information System (INIS)

1983-01-01

The provisions of the Regulations cover, inter alia, the general precautions and requirements relating to radiation safety of the public and radiation workers and registration of irradiating apparatus or premises on which such apparatus is operated. In addition, the Regulations set forth requirements for the operation of such apparatus and for the premises involved. (NEA) [fr

Analysis of accidents in uranium mines and suggestions on safety in production

International Nuclear Information System (INIS)

Xue Shiqian.

1989-01-01

The serious and fatal accidents happening in the uranium mines in China are descibed and analysed based on the classification, cause, age of the dead and economic losses brought by the accidents. The suggestions on safety in production are also presented

JET-ISX-B beryllium limiter experiment safety analysis report and operational safety requirements

International Nuclear Information System (INIS)

Edmonds, P.H.

1985-09-01

An experiment to evaluate the suitability of beryllium as a limiter material has been completed on the ISX-B tokamak. The experiment consisted of two phases: (1) the initial operation and characterization in the ISX experiment, and a period of continued operation to the specified surface fluence (10 22 atoms/cm 2 ) of hydrogen ions; and (2) the disassembly, decontamination, or disposal of the ISX facility. During these two phases of the project, the possibility existed for beryllium and/or beryllium oxide powder to be produced inside the vacuum vessel. Beryllium dust is a highly toxic material, and extensive precautions are required to prevent the release of the beryllium into the experimental work area and to prevent the contamination of personnel working on the device. Details of the health hazards associated with beryllium and the appropriate precautions are presented. Also described in appendixes to this report are the various operational safety requirements for the project

A model of the precaution adoption process: evidence from home radon testing

International Nuclear Information System (INIS)

Weinstein, N.D.; Sandman, P.M.

1992-01-01

The authors present the precaution adoption process model--a stage theory consisting of seven distinct states between ignorance and completed preventive action. The stages are 'unaware of the issue,' 'aware of the issue but not personally engaged,' 'engaged and deciding what to do,' 'planning to act but not yet having acted,' 'having decided not to act,' 'acting,' and 'maintenance.' The theory asserts that these stages represent qualitatively different patterns of behavior, beliefs, and experience and that the factors that produce transitions between stages vary depending on the specific transition being considered. Data from seven studies of home radon testing are examined to test some of the claims made by this model. Stage theories of protective behavior are contrasted with theories that see precaution adoption in terms of movement along a single continuum of action likelihood.32 references

Risk factors and precautions of inpatient suicide from the perspective of nurses: A qualitative study.

Science.gov (United States)

Hu, De-ying; Huang, Di; Xiong, Yu; Lu, Cai-hong; Han, Yan-hong; Ding, Xiao-ping; Wang, Shu-jie; Liu, Yi-lan

2015-04-01

The risk factors and precautions of inpatient suicide were explored. Thirty suicide victims were drawn from the adverse event reports of suicidal act during hospitalization in a general hospital from 2008 to 2014. Data were gathered from the focus group interviews of twelve nurses who had experienced inpatient suicide. The data were analyzed by using analytical technique based on grounded theory, and software QSR NVIVO8 was used to aid the collation of data. Three main themes of risk factors about inpatient suicide emerged from the analysis: individual value, social factors and environmental factors. The individual value was categorized into different groups such as sense of guilt, hopelessness and low self-esteem. Social factors included two aspects of negative life events and social support. Three themes of precautions about inpatient suicide appeared in this study: evaluation, nursing and information exchange. Evaluation was elaborated from both physical and psychological assessments. This finding extends existing work of risk factors and precautions about inpatient suicide and brings new knowledge about the reasons why inpatients commit suicide.

Microbiological safety cabinets, cytotoxic safety cabinets. Choice and use

International Nuclear Information System (INIS)

Balty, I.; Belhanini, B.; Clermont, H.; Cornu, J.C.; Jacquet, M.A.; Texte, J.C.

2003-01-01

Drawn up by a working group composed of prevention professionals, manufacturers and control bodies, this guide is intended to help those responsible for safety in laboratories choose and acquire materials responding to the intended protection objectives. It provides recommendations for the commissioning and control of these materials as well as for their use. After a description of the operational characteristics of safety cabinets, this guide looks at the important points to be taken into account when ordering, accepting and commissioning equipment adapted to precise needs. It also covers verification of correct operation and provides a number of common sense rules relative to precautions for use. Material cleaning and decontamination is described briefly on account of the very specialized character of this activity. Detailed information relative to this subject should be sought in the literature. (authors)

Safety report concerning the reactor Pegase - volume 1 - Description of the installation - volume 2 - Safety of the installations

International Nuclear Information System (INIS)

Lacour, J.

1964-01-01

In the first volume: This report is a description of the reactor Pegase, given with a view to examine the safety of the installations. The Cadarache site at which they are situated is briefly described, in particular because of the consequences on the techniques employed for building Pegase. A description is also given of the original aspects of the reactor. The independent loops which are designed for full-scale testing of fuel elements used in natural uranium-gas-graphite reactor systems are described in this report, together with their operational and control equipment. In the second volume: In the present report are examined the accidents which could cause damage to the Pegase reactor installation. Among possible causes of accidents considered are the seismicity of the region, an excessive power excursion of the reactor and a fracture in the sealing of an independent loop. Although all possible precautions have been taken to offset the effects of such accidents, their ultimate consequences are considered here. The importance is stressed of the security action and regulations which, added to the precautions taken for the construction, ensure the safety of the installations. (authors) [fr

Infectious Gastroenteritis and the Need for Strict Contact Precaution Procedures in Adults Presenting in the Emergency Department

DEFF Research Database (Denmark)

Skyum, Florence; Andersen, Vibeke; Chen, Ming

2018-01-01

BACKGROUND: Acute infectious gastroenteritis requires contact precautions to prevent spreading. On acute admission the cause of diarrhoea is unknown, so the decision of whom to isolate has to be made on clinical information with a risk of inexpedient use of contact precautions. AIM: The aims...... of the study were to investigate how often gastroenteritis occurs, and thus the isolation indication has to be assessed, in Danish emergency departments, and how often patients have to remain on contact precaution according to the results of the faecal samples. METHODS: This Danish register based retrospective......: Among 66,885 acute admissions 4.3% patients had at least one feature of gastroenteritis: admission with a chief complaint of diarrhoea (1.6%); faecal sample microbiology examination (2.8%); discharged with a gastroenteritis diagnosis (1.7%). 19% of those who had a faecal sample tested were norovirus...

Licensing procedure by steps, indemnity precaution, control by administrative courts

International Nuclear Information System (INIS)

Sellner, D.

1986-01-01

The author describes three problems of the Wyhl-judgement of the Federal Administrative Court. The terms 'licensing procedure by steps', 'indemnity precaution pursuant to sec. 7, para. 2, No. 3 Atomic Energy Act', and 'control density of administrative courts' are concretized. The author chooses these terms because they have important impulses even for other fields than Atomic Energy Law. (CW) [de

Safety evaluation of the nuclear power plant at Cattenom

International Nuclear Information System (INIS)

Anon.

1987-01-01

This is a systematic compilation of the material which was dealt with at the level of the German-French Commission (on questions of the safety of nuclear installations) in this discussions about the nuclear power plant at Cattenom. As a supplement to the report published already in 1982, the Commission has officially released its deliberation results on the subjects constructive safety measures, radiological effects, and precautions in case of an emergency. The allegations according to which the installation is wanting in safety are countered by the joint statement of the chairmen of GPR (Permanent Group on Reactors) and RSK (German Commission on Reactor Safety) of August 29, 1986. (HSCH) [de

Occupational injury history and universal precautions awareness: a survey in Kabul hospital staff

Directory of Open Access Journals (Sweden)

Garner Paul

2010-01-01

Full Text Available Abstract Background Health staff in Afghanistan may be at high risk of needle stick injury and occupational infection with blood borne pathogens, but we have not found any published or unpublished data. Methods Our aim was to measure the percentage of healthcare staff reporting sharps injuries in the preceding 12 months, and to explore what they knew about universal precautions. In five randomly selected government hospitals in Kabul a total of 950 staff participated in the study. Data were analyzed with Epi Info 3. Results Seventy three percent of staff (72.6%, 491/676 reported sharps injury in the preceding 12 months, with remarkably similar levels between hospitals and staff cadres in the 676 (71.1% people responding. Most at risk were gynaecologist/obstetricians (96.1% followed by surgeons (91.1%, nurses (80.2%, dentists (75.4%, midwives (62.0%, technicians (50.0%, and internist/paediatricians (47.5%. Of the injuries reported, the commonest were from hollow-bore needles (46.3%, n = 361/780, usually during recapping. Almost a quarter (27.9% of respondents had not been vaccinated against hepatitis B. Basic knowledge about universal precautions were found insufficient across all hospitals and cadres. Conclusion Occupational health policies for universal precautions need to be implemented in Afghani hospitals. Staff vaccination against hepatitis B is recommended.

Effects of a mixed media education intervention program on increasing knowledge, attitude, and compliance with standard precautions among nursing students: A randomized controlled trial.

Science.gov (United States)

Xiong, Peng; Zhang, Jun; Wang, Xiaohui; Wu, Tat Leong; Hall, Brian J

2017-04-01

Standard precautions (SPs) are considered fundamental protective measures to manage health care-associated infections and to reduce occupational health hazards. This study intended to assess the effectiveness of a mixed media education intervention to enhance nursing students' knowledge, attitude, and compliance with SPs. A randomized controlled trial with 84 nursing students was conducted in a teaching hospital in Hubei, China. The intervention group (n = 42) attended 3 biweekly mixed media education sessions, consisting of lectures, videos, role-play, and feedback with 15-20 minutes of individual online supervision and feedback sessions following each class. The control group learned the same material through self-directed readings. Pre- and posttest assessments of knowledge, attitudes, and compliance were assessed with the Knowledge with Standard Precautions Questionnaire, Attitude with Standard Precautions Scale, and the Compliance with Standard Precautions Scale, respectively. The Standard Bacterial Colony Index was used to assess handwashing effectiveness. At 6-week follow-up, performance on the Knowledge with Standard Precautions Questionnaire, Attitude with Standard Precautions Scale, and Compliance with Standard Precautions Scale were significantly improved in the intervention group compared with the control group (P media education intervention is effective in improving knowledge, attitude, and compliance with SPs. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Restructuring of University Laboratories within the Scope of Occupational Health and Safety

OpenAIRE

Ordu, Kamil Musa; Çivi Bilir, Gülçin

2018-01-01

Laboratory safety is major of importance tooccupational health and safety, which manages, and responds to all issues andconcerns surrounding physical, biological, ergonomic, electrical, chemical, andother standard operating procedures. In this work, laboratory design and equipment,which are arranged according to precautions that are taken against to allhazards regarding to work environment or personal expose at the workenvironments in laboratories that are already exist or will be established...

21 CFR 111.365 - What precautions must you take to prevent contamination?

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What precautions must you take to prevent contamination? 111.365 Section 111.365 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN...

Preventing nosocomial infections: improving compliance with standard precautions in an Indonesian teaching hospital.

NARCIS (Netherlands)

Duerink, D.O.; Farida, H.; Nagelkerke, N.J.; Wahyono, H.; Keuter, M.; Lestari, E.S.; Hadi, U.; Broek, P.J.J.A. van den

2006-01-01

Standard precautions can prevent transmission of micro-organisms. This study investigated hand hygiene, handling of needles and use of personal protective equipment in an Indonesian teaching hospital, and performed a multi-faceted intervention study to improve compliance. An intervention was

Development of a New Safety Culture Assessment Method for Nuclear Power Plants (NPPs) (A study to suggest a new safety culture assessment method in nuclear power plants)

International Nuclear Information System (INIS)

Han, Sang Min; Seong, Poong Hyun

2014-01-01

This study is conducted to suggest a new safety culture assessment method in nuclear power plants. Criteria with various existing safety culture analysis methods are united, and reliability analysis methods are applied. The concept of the most representative methods, Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA), are adopted to assess safety culture. Through this application, it is expected that the suggested method will bring results with convenience and objectiveness

Development of a New Safety Culture Assessment Method for Nuclear Power Plants (NPPs) (A study to suggest a new safety culture assessment method in nuclear power plants)

Energy Technology Data Exchange (ETDEWEB)

Han, Sang Min; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

2014-08-15

This study is conducted to suggest a new safety culture assessment method in nuclear power plants. Criteria with various existing safety culture analysis methods are united, and reliability analysis methods are applied. The concept of the most representative methods, Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA), are adopted to assess safety culture. Through this application, it is expected that the suggested method will bring results with convenience and objectiveness.

: Principles of safety measures of sports events organizers without the involvement of police

OpenAIRE

Buchalová, Kateřina

2013-01-01

Title: Principles of safety measures of sports events organizers without the involvement of police Objectives: The aim of this thesis is a description of security measures at sporting events organizers. Methods: The thesis theoretical style is focused on searching for available sources of study and research, and writing their summary comparing safety measures of the organizers. Results: This work describes the activities of the organizers of sports events and precautions that must be provided...

Safety in times of crises - the importance of industrial emergency plans

International Nuclear Information System (INIS)

Rademacher, H.; Schulten, R.

1989-01-01

Technical and organizational precautions cannot always avoid everyday risks such as accidents, fire, explosions, and other critical situations which without appropriate countermeasures can easily develop into emergencies. While in recent years considerable efforts have been going into improving the technical safety of industrial plants particularly susceptible to accidents (e.g. the nuclear and chemical industry), organizational safety seems to have been neglected. An analysis of different accidents reveals human fallibility rather than technical failures to be causing damage in many cases. Industrial emergency plans are considered to be contributing to the improvement of organizational safety. (orig.) [de

Precautions against axial fan stall in reactor building to Tianwan NPP

International Nuclear Information System (INIS)

Liu Chunlong; Pei Junmin

2011-01-01

The paper introduces the mechanism and harm of rotating stall of axial fans, analyzes the necessity for prevention against axial fan stall in reactor building of Tianwan NPP, introduces the precautions, and then makes an assessment on anti-stall effect of flow separators. It can provide reference for model-selection or reconstruction of similar fans in power stations, and for operation and maintenance of axial fans. (authors)

Perceptions about safety and risks in gender-based violence research: implications for the ethics review process.

Science.gov (United States)

Sikweyiya, Yandisa; Jewkes, Rachel

2011-10-01

Does research on gender-based violence (GBV) pose greater than minimal risk to researchers and participants? This question needs to be understood particularly in light of hesitancy by Institutional Review Boards to approve research on GBV. The safety and risks of doing GBV studies and the implications for the ethical review process have not been a focus of much research. This qualitative study collected data through in-depth interviews with 12 experienced GBV researchers from various countries and a desk review. This paper explores researchers' interpretation of and meanings of the safety recommendations as provided in the WHO guidelines and whether there is empirical evidence on the presence of risks and safety concerns unique to GBV research. Informants raised a number of safety concerns about GBV research, yet in the interviews there were very few examples of problems having occurred, possibly because of the precautions applied. This paper argues that the notion that GBV studies carry greater than minimal risk when ethics precautions are followed is based on speculation, not evidence. It highlights the need for empirical evidence to support assertions of risk in research.

Evaluation of reactor safety

Energy Technology Data Exchange (ETDEWEB)

NONE

1960-04-15

Although the operation of nuclear reactors has a remarkably good record of safety, the prevention of possible reactor accidents is one of the major factors that atomic planners have to contend with. At the same time, excessive caution may breed an attitude that hampers progress, either by resisting new development or by demanding unnecessarily elaborate and expensive precautions out of proportion to the actual hazards involved. The best course obviously is to determine the possible dangers and adopt adequate measures for their prevention, providing of course, for a reasonable margin of error in judging the hazards and the effectiveness of the measures. The greater the expert understanding and thoroughness with which this is done, the narrower need the margin be. This is the basic idea behind the evaluation of reactor safety

78 FR 28495 - Safety Zone; Safety Precautions to Protect the Public from the Effects of a Potential...

Science.gov (United States)

2013-05-15

... environmental risk to health or risk to safety that might disproportionately affect children. 10. Indian Tribal... and port recovery operations in this part of the Illinois River, and the potential structural concerns... from the hazards associated with salvage and port recovery operations and the potential catastrophic...

Analysis of the Convention on Nuclear Safety and Suggestions for Improvement

International Nuclear Information System (INIS)

Choi, K. S.; Viet, Phuong Nguyen

2013-01-01

The innovative approach of the Convention, which is based on incentive after than legal binding, had been considered successful in strengthening the nuclear safety worldwide. However, the nuclear accident at the Fukushima Dai-ichi Nuclear Power Plant (Japan) in March 2011 has exposed a number of weaknesses of the Convention. Given that context, this paper will analyse the characteristics of the CNS in order to understand the advantages and disadvantages of the Convention, and finally to suggest some possible improvements. The analysis in this paper shows that the incentive approach of the CNS has succeeded in facilitating the active roles of its Contracting Parties in making the National Reports and participating in the peer review of these reports. However, the incoherent quality of the National Reports, the different level of participation in the peer review process by different Contracting Parties, and the lack of transparency of the peer review have undermined the effectiveness of the Convention in strengthening the international safety regime as well as preventing serious regulatory errors that had happened in Japan before the Fukushima accident. Therefore, the peer review process should be reformed into a more transparent and independent direction, while an advisory group of regulators within the CNS might also be useful in improving the effectiveness of the Convention as already proven by the good practice in the European Union. Only with such effective change, the CNS can maintain its pivotal role in the international safety regime

Improvement suggestions on license extension management for civil nuclear safety equipment activities

International Nuclear Information System (INIS)

Sun Xingjian; Liu Hongji; Han Guoli; Jia Fengcai

2013-01-01

Based on the concepts of Clear Requirements, Comprehensive Review, Objective Assessment, Dynamic Management, this paper gives improvement suggestions on license extension management for civil nuclear safety equipment design, manufacture, installation and non-destructive examination activities, which include establishing a relatively unified license extension review standard, combining multi-views and close linking license review and supervision, full utilizing the daily supervision and inspection results, as well as further improving motivation and elimination mechanism. (authors)

Design precautions for coupling interfaces between nuclear heating reactor and heating grid or desalination plant

International Nuclear Information System (INIS)

Zheng Wenxiang

1998-01-01

Nuclear heating reactor (NHR) has been developed by INET since the early eighties. To achieve its economic viability and safety goal, the NHR is designed with a number of advanced and innovative features, including integrated arrangement, natural circulation, self-pressurized performance, dynamically hydraulic control rod drive and passive safety systems. As a new promising energy system, the NHR can serve for district heating, air conditioning, sea-water desalination and other industrial processes. For all of these applications, it is vital that the design and performance of the coupling interfaces shall insure protection of user ends against radioactive contamination. Therefore, an intermediate circuit is provided in the NHR as a physical barrier, and the operating pressure in the intermediate circuit is higher than that in the primary system. In addition, the radioactivity in the intermediate circuit is monitored continuously, and there are also other protection measures in the design for isolating the intermediate circuit and the heating grid or desalination plant under some emergency conditions. The excellent performance of the above design precautions for the coupling interfaces has been demonstrated by operational practice from the NHR-5, a 5 MW(thermal) experimental NHR, which was put into operation in 1989. This paper presents the main design features of the NHR as well as the special provisions taken in the design for coupling the NHR to the heating grid or desalination plant and some operating experience from the NHR-5. (author)

Balloon brachytherapy for brain tumor-radiation safety experiences at the University of Medicine and Dentistry of New Jersey.

Science.gov (United States)

Lanka, Venkata K

2006-11-01

Balloon brachytherapy is a technique for the removal of a brain tumor in which an inflatable balloon is placed in a resection cavity and then filled with liquid I, delivering low energy dose to the cancerous cells surrounding the cavity. After preparing a patient room to mitigate any spills or contamination, liquid 125I (Iotrex) was assayed with a dose calibrator and injected into the balloon placed in the patient's brain. Approximately 98.6% of the isotope was recovered at the end of the procedure. Approximately 1.4% remained unrecovered and is assumed to have diffused through the balloon membrane. Each day, the patient's urine was collected and the total urine activity measured was less than 7% of the unrecovered activity. The remainder of the unrecovered activity was not evaluated. It was assumed to be distributed in the patient's body, and a tiny quantity of liquid spilled from an IV line while injecting. Training was conducted for radiation oncologists, neurosurgeons, and participating residents regarding balloon brachytherapy radiation safety precautions. Precautions during treatment included safe handling of body fluids. General radiation safety precautions and nursing care instructions were posted on the patient door. Air monitoring was conducted to detect any airborne iodine. At the time of balloon removal, the radiation safety department monitored the operating room and staff for contamination. Waste, including the balloon, was held for decay on site prior to disposal.

Pitfalls and Precautions When Using Predicted Failure Data for Quantitative Analysis of Safety Risk for Human Rated Launch Vehicles

Science.gov (United States)

Hatfield, Glen S.; Hark, Frank; Stott, James

2016-01-01

Launch vehicle reliability analysis is largely dependent upon using predicted failure rates from data sources such as MIL-HDBK-217F. Reliability prediction methodologies based on component data do not take into account system integration risks such as those attributable to manufacturing and assembly. These sources often dominate component level risk. While consequence of failure is often understood, using predicted values in a risk model to estimate the probability of occurrence may underestimate the actual risk. Managers and decision makers use the probability of occurrence to influence the determination whether to accept the risk or require a design modification. The actual risk threshold for acceptance may not be fully understood due to the absence of system level test data or operational data. This paper will establish a method and approach to identify the pitfalls and precautions of accepting risk based solely upon predicted failure data. This approach will provide a set of guidelines that may be useful to arrive at a more realistic quantification of risk prior to acceptance by a program.

Radiation safety in radioluminous paint workshop handling tritium activated paint

International Nuclear Information System (INIS)

Gaur, P.K.; Venkateswaran, T.V.

1986-01-01

This paper discusses the safety features related to a workshop when tritium activated luminous paint is handled by workmen. Salient features of the workshop and the methods employed for monitoring the radiation levels are briefly outlined and results are discussed. The importance of proper ventilation of the workplace and precautions to be taken in the storage of painted articles are highlighted. (author). 1 table, 3 figs

Improving Patient Safety: Improving Communication.

Science.gov (United States)

Bittner-Fagan, Heather; Davis, Joshua; Savoy, Margot

2017-12-01

Communication among physicians, staff, and patients is a critical element in patient safety. Effective communication skills can be taught and improved through training and awareness. The practice of family medicine allows for long-term relationships with patients, which affords opportunities for ongoing, high-quality communication. There are many barriers to effective communication, including patient factors, clinician factors, and system factors, but tools and strategies exist to address these barriers, improve communication, and engage patients in their care. Use of universal precautions for health literacy, appropriate medical interpreters, and shared decision-making are evidence-based tools that improve communication and increase patient safety. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Developing safety culture in nuclear activities. Practical suggestions to assist progress

International Nuclear Information System (INIS)

2000-01-01

The term 'safety culture' was introduced by the International Nuclear Safety Advisory Group (INSAG) in Summary Report on the Post-Accident Review Meeting on the Chernobyl Accident published by the IAEA as Safety Series No. 75-INSAG-1 in 1986, and expanded in Basic Safety Principles for Nuclear Power Plants, Safety Series No. 75-INSAG-3 in 1988. This publication supplements INSAG-4 published in 1991 which includes the definition and concept of safety culture describing practices valuable in establishing and maintaining a sound safety culture in a number of countries. It is intended for those who design, construct, manufacture, operate, maintain or decommission nuclear facilities. It should be practically useful for all those involved in operating nuclear facilities. It will also provide a reference for groups such as regulators who have an interest in developing, improving and evaluating safety culture training and individuals engaged in nuclear activities, and for bodies such as ethics review committees who should take into account safety culture issues for certifying professional excellence in the medical field

Developing safety culture in nuclear activities. Practical suggestions to assist progress

International Nuclear Information System (INIS)

1998-01-01

The term 'safety culture' was introduced by the International Nuclear Safety Advisory Group (INSAG) in Summary Report on the Post-Accident Review Meeting on the Chernobyl Accident published by IAEA as safety Series No. 75-INSAG-1 in 1986, and expanded in Basic Safety principles for Nuclear Power Plants, Safety Series No. 75-INSAG-3 in 1988. This publication supplements INSAG-4 published in 1991 which includes the definition and concept of safety culture describing practices valuable in establishing and maintaining a sound safety culture in a number of countries. It is intended for those who design, construct, manufacture, operate, maintain or decommission nuclear facilities. It should be practically useful for all those involved in operating nuclear facilities. It will also provide a reference for groups such as regulators who have an interest in developing, improving and evaluating safety culture training and individuals engaged in nuclear activities, and for bodies such as ethics review committees who should take into account safety culture issues for certifying professional excellence in the medical field

Beyond patchwork precaution in the dual-use governance of synthetic biology.

Science.gov (United States)

Kelle, Alexander

2013-09-01

The emergence of synthetic biology holds the potential of a major breakthrough in the life sciences by transforming biology into a predictive science. The dual-use characteristics of similar breakthroughs during the twentieth century have led to the application of benignly intended research in e.g. virology, bacteriology and aerobiology in offensive biological weapons programmes. Against this background the article raises the question whether the precautionary governance of synthetic biology can aid in preventing this techno-science witnessing the same fate? In order to address this question, this paper proceeds in four steps: it firstly introduces the emerging techno-science of synthetic biology and presents some of its potential beneficial applications. It secondly analyses contributions to the bioethical discourse on synthetic biology as well as precautionary reasoning and its application to life science research in general and synthetic biology more specifically. The paper then identifies manifestations of a moderate precautionary principle in the emerging synthetic biology dual-use governance discourse. Using a dual-use governance matrix as heuristic device to analyse some of the proposed measures, it concludes that the identified measures can best be described as "patchwork precaution" and that a more systematic approach to construct a web of dual-use precaution for synthetic biology is needed in order to guard more effectively against the field's future misuse for harmful applications.

Safety precautions in atomic pile control (1962); Securite dans le controle des piles atomiques (1962)

Energy Technology Data Exchange (ETDEWEB)

Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1962-07-01

We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [French] Nous avons aborde le probleme de la securite dans le controle des piles atomiques a la suite de notre participation d'une part aux avant rojets de piles atomiques du CE.A. et d'autre part a l'examen au sein de la sous ommission de surete des piles, de la securite des piles du CE.A. en fonctionnement ou en projet. Nous avons ete amenes a nous interesser alors aux risques encourus par les piles pendant leur fonctionnement et par la meme a leur comportement en regime dynamique. Ce travail traite principalement de l'importance des securites intrinseques, de l'influence des variations de reactivite sur les evolutions de puissance en regime d'accident et du developpement d'appareillages de securite robustes et de fonctionnement tres sur. L'accident de demarrage a ete particulierement developpe aussi bien pour les piles a bas

Safety precautions in atomic pile control (1962); Securite dans le controle des piles atomiques (1962)

Energy Technology Data Exchange (ETDEWEB)

Furet, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1962-07-01

We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [French] Nous avons aborde le probleme de la securite dans le controle des piles atomiques a la suite de notre participation d'une part aux avant rojets de piles atomiques du CE.A. et d'autre part a l'examen au sein de la sous ommission de surete des piles, de la securite des piles du CE.A. en fonctionnement ou en projet. Nous avons ete amenes a nous interesser alors aux risques encourus par les piles pendant leur fonctionnement et par la meme a leur comportement en regime dynamique. Ce travail traite principalement de l'importance des securites intrinseques, de l'influence des variations de reactivite sur les evolutions de puissance en regime d'accident et du developpement d'appareillages de securite robustes et de fonctionnement tres sur. L'accident de demarrage a ete particulierement

Late lessons from early warnings: science, precaution, innovation

DEFF Research Database (Denmark)

Hansen, Steffen Foss

2013-01-01

of chemical and technological innovations, and highlight a number of systemic problems. The 'Late Lessons Project' illustrates how damaging and costly the misuse or neglect of the precautionary principle can be, using case studies and a synthesis of the lessons to be learned and applied to maximising...... rather than present specific estimates for these costs. Making the best use of environmental science and modelling helps to make environmental protection and precaution a priority. Producing cost estimates should not be left to economists alone, but should rather be seen as a starting point for a broader...... discussion, featuring also the relevant expertise in health, ecology, demography, modelling and science. Well researched estimates, based on interdisciplinary collaboration, can strengthen some of those scattered and diffuse interests, which during the ordinary processes of policy-making have difficulty...

Quantitative criteria in the application of the principle of precaution

International Nuclear Information System (INIS)

Touzet, Rodolfo; Ferrari, Jorge

2008-01-01

The Principle of Precaution establishes that 'when an activity represents a threat or damage for the human health or the environment, it is necessary to take precautionary measures, even when it could not have been scientifically demonstrated the cause-effect relationship in conclusive form' This declaration implies acting even in presence of uncertainty, deriving the responsibility and the safety to who create the risk, to analyze the possible alternatives and to use participative methods for taking decisions. This presents practically two dilemmas: How make a cost-benefit analysis when is not yet established the relationship between cause and effect for the health of the exposed persons? (With regard to the ionizing radiations a major information does exist and a factor a is in use, that represents the economic cost of the dose gotten by a person) What criteria to use in the case if it were demonstrated that non ionizing radiations act in synergic form with the ionizing ones? How to integrate a quantitative criterion of optimization with a qualitative criterion of precaution? They will have to appear some temporary hypotheses in order to be able to perform the quantitative corresponding evaluations. In the case of low frequencies the situation was exactly equal in the past, but the epidemiological studies, as well as the experiments in vivo and in vitro, demonstrated that the exposure can increase the risk of cancer in children and induce other health problems in children and adults. A possible temporary hypothesis for the radio frequencies is to assume that the effects are similar in magnitude to those caused by the low frequency fields. In this case it is possible to demonstrate that if this were really true the epidemiological statistics would not even allow demonstrate it, due to the quantity of persons involved, the time devoted to the studied populations and the latency times of the leukaemia. The use of some work hypothesis to make the cost-benefit studies

Difference in compliance with Standard Precautions by nursing staff in Brazil versus Hong Kong.

Science.gov (United States)

Pereira, Fernanda Maria Vieira; Lam, Simon Ching; Chan, Jackie Hoi Man; Malaguti-Toffano, Silmara Elaine; Gir, Elucir

2015-07-01

The Standard Precautions (SP) are measures to reduce the risk of transmission of bloodborne and other pathogens, and should be used by health professionals in the care of all patients regardless of their condition of infection. However, suboptimal compliance with SP has been consistently reported in the nursing literature. This study evaluated the differences of compliance with SP among nurses from Brazil and Hong Kong. This cross-sectional study was conducted in 2 countries-Hong Kong and Brazil-with nurses working in hospitals who responded to a self-administered questionnaire with demographic data and responses to a 20-item Compliance with Standard Precautions Scale. The compliance rate of 560 nurses was 69.4% for the Brazilian sample and 57.4% for the Hong Kong sample. The additional clinical experience of the Brazilian nurses versus those in Hong Kong may be related to differences in compliance with SP between nurses. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Fusion-reactor blanket-material safety-compatibility studies

International Nuclear Information System (INIS)

Jeppson, D.W.; Muhlestein, L.D.; Keough, R.F.; Cohen, S.

1982-11-01

Blanket material selection for fusion reactors is strongly influenced by the desire to minimize safety and environmental concerns. Blanket material safety compatibility studies are being conducted to identify and characterize blanket-coolant-material interactions under postulated reactor accident conditions. Recently completed scoping compatibility tests indicate that : (1) ternary oxides (LiAlO 2 , Li 2 ZrO 3 , Li 2 SiO 3 , Li 4 SiO 4 and LiTiO 3 ) at postulated blanket operating temperatures are compatible with water coolant, while liquid lithium and Li 7 Pb 2 alloy reactions with water generate heat, aerosol and hydrogen; (2) lithium oxide and Li 17 Pb 83 alloy react mildly with water requiring special precautions to control hydrogen release; (3) liquid lithium reacts substantially, while Li 17 Pb 83 alloy reacts mildly with concrete to produce hydrogen; and (4) liquid lithium-air reactions present some major safety concerns

Safety analysis of the 2.5 MV accelerator in the Solid State Division's Positive Heavy Ion Scattering Implantation, Channeling and Sputtering (PHISICS) facility

International Nuclear Information System (INIS)

Schow, O.E.

1975-09-01

A safety system, with precautions against radiation hazards, electrical hazards, hazards from high pressure and high vacuum equipment, and fire hazards, is described. The possible radiation doses for operators are considered, including neutron production and ion implantation effects. The system logic and testing of the radiation monitor system are discussed, and a block diagram of the entire safety system is given. (PMA)

Laboratory testing in management of patients with suspected Ebolavirus disease: infection control and safety.

Science.gov (United States)

Gilbert, G L

2015-08-01

If routine laboratory safety precautions are followed, the risk of laboratory-acquired infection from handling specimens from patients with Ebolavirus disease (EVD) is very low, especially in the early 'dry' stage of disease. In Australia, border screening to identify travellers returning from EVD-affected west African countries during the 2014-2015 outbreak has made it unlikely that specimens from patients with unrecognised EVD would be sent to a routine diagnostic laboratory. Australian public health and diagnostic laboratories associated with hospitals designated for the care of patients with EVD have developed stringent safety precautions for EVD diagnostic and other tests likely to be required for supportive care of the sickest (and most infectious) patients with EVD, including as wide a range of point-of-care tests as possible. However, it is important that the stringent requirements for packaging, transport and testing of specimens that might contain Ebolavirus--which is a tier 1 security sensitive biology agent--do not delay the diagnosis and appropriate management of other potentially serious but treatable infectious diseases, which are far more likely causes of a febrile illness in people returning from west Africa. If necessary, urgent haematology, biochemistry and microbiological tests can be performed safely, whilst awaiting the results of EVD tests, in a PC-2 laboratory with appropriate precautions including: use of recommended personal protective equipment (PPE) for laboratory staff; handling any unsealed specimens in a class 1 or II biosafety cabinet; using only centrifuges with sealed rotors; and safe disposal or decontamination of all used equipment and laboratory waste.

Undergraduate Organic Chemistry Laboratory Safety

Science.gov (United States)

Luckenbaugh, Raymond W.

1996-11-01

Each organic chemistry student should become familiar with the educational and governmental laboratory safety requirements. One method for teaching laboratory safety is to assign each student to locate safety resources for a specific class laboratory experiment. The student should obtain toxicity and hazardous information for all chemicals used or produced during the assigned experiment. For example, what is the LD50 or LC50 for each chemical? Are there any specific hazards for these chemicals, carcinogen, mutagen, teratogen, neurotixin, chronic toxin, corrosive, flammable, or explosive agent? The school's "Chemical Hygiene Plan", "Prudent Practices for Handling Hazardous Chemicals in the Laboratory" (National Academy Press), and "Laboratory Standards, Part 1910 - Occupational Safety and Health Standards" (Fed. Register 1/31/90, 55, 3227-3335) should be reviewed for laboratory safety requirements for the assigned experiment. For example, what are the procedures for safe handling of vacuum systems, if a vacuum distillation is used in the assigned experiment? The literature survey must be submitted to the laboratory instructor one week prior to the laboratory session for review and approval. The student should then give a short presentation to the class on the chemicals' toxicity and hazards and describe the safety precautions that must be followed. This procedure gives the student first-hand knowledge on how to find and evaluate information to meet laboartory safety requirements.

Canadian Consumer Food Safety Practices and Knowledge: Foodbook Study.

Science.gov (United States)

Murray, Regan; Glass-Kaastra, Shiona; Gardhouse, Christine; Marshall, Barbara; Ciampa, Nadia; Franklin, Kristyn; Hurst, Matt; Thomas, M Kate; Nesbitt, Andrea

2017-10-01

Understanding consumers' food safety practices and knowledge supports food safety education for the prevention of foodborne illness. The objective of this study was to describe Canadian consumer food safety practices and knowledge. This study identifies demographic groups for targeted food safety education messaging and establishes a baseline measurement to assess the effectiveness of food safety interventions over time. Questions regarding consumer food safety practices and knowledge were included in a population-based telephone survey, Foodbook, conducted from November 2014 to March 2015. The results were analyzed nationally by age group and by gender. The results showed that approximately 90% of Canadians reported taking the recommended cleaning and separating precautions when handling raw meat to prevent foodborne illness. Only 29% of respondents reported using a food thermometer when cooking any meat, and even fewer (12%) reported using a food thermometer for small cuts of meat such as chicken pieces. The majority (>80%) of Canadians were aware of the foodborne illness risks related to chicken and hamburger, but fewer (poultry.

Reactor safety research against the backdrop of the Energy-Omnibus Law

International Nuclear Information System (INIS)

Kuczera, B.

1995-01-01

On July 19, 1994, the German Federal Parliament adopted the Coal/Nuclear Power Omnibus Law, in which a new quality of safety of future nuclear power plants has been laid down. The defense-in-depth safety concept underlying the nuclear power plants currently in operation is derived from the principle of safety precautions made against reactor accidents, and encompasses preventive measures of accident mangement and mitigating measures of containing possible consequences. Accident management leads to the requirement that even in the most unlikely accidents with core meltdown the consequences remain limited to the plant. A new quality in reactor safety is represented by the System 80+ advanced pressurized water reactor and by the European Pressurized Water Reactor, EPR. Despite different views about the approaches used to address individaul aspects in the achievement of safety goals, there is agreement on the principle that risk provisions, by achieving more transparency, are to result in better public acceptance of the peaceful uses of nuclear power. (orig.) [de

NAGRA - Sites for geological repositories - Technical safety factors: Suggestions for stage 3

International Nuclear Information System (INIS)

2015-01-01

This comprehensive brochure published by the Swiss National Cooperative for the Disposal of Radioactive Waste (NAGRA) examines the six sites for repositories for nuclear wastes in Switzerland which have been proposed in Stage 1 of the program concerning nuclear waste repositories. Three of these sites are proposed for both highly radioactive wastes as well as for low and medium-active wastes, the other three for low and medium-active wastes only. The evaluation of the sites is discussed. The sites are to be further evaluated in Stage 2 of the program. The work to be done in the further stages involved in the selection of the final site (or sites) is described. Along with definition of the regions where deep repositories could possibly be built, suggestions for the placing of the facilities required on the surface are discussed. Geological requirements on the repositories and safety-relevant characteristics of the various site options are discussed. The results of the assessments made are presented in tabular form. Maps and geological cross-sections of all the suggested areas are included

30-th anniversary of nuclear power engineering in the USSR. Safety problems of nuclear engineering

International Nuclear Information System (INIS)

Kulov, E.V.; Sidorenko, V.A.; Kovalevich, O.M.

1984-01-01

The problems of safety and protection of personnel, population and environments from the NPP radiation effect in the Soviet Union in cases of possible accidents and in the course of normal operation are discussed. The problem of safety assurance includes scientific technological and organizational aspects. The necessity of accounting the ''national factor'' in the form of a possible NPP location, existing legislation experience gained, etc. is noted. The main trends in ensuring safety are a high quality of equipment manufacturing and assembly, quality control of equipment at all stages of operation, development and realization of efficient protective measures and devices, assurance of safety precautions at all stages of designing equipment production, NPP operation and maintenance, functioning of the system of state control of NPP safety assurance. The skill and training of personnel are necessary prerequisite for ensuring safety of nuclear power plants

Preparation of safety analysis reports (SARs) for near surface radioactive waste disposal facilities. Format and content of SARs

International Nuclear Information System (INIS)

1995-02-01

All facilities at which radioactive wastes are processed, stored and disposed of have the potential for causing hazards to humans and to the environment. Precautions must be taken in the siting, design and operation of the facilities to ensure that an adequate level of safety is achieved. The processes by which this is evaluated is called safety assessment. An important part of safety assessment is the documentation of the process. A well prepared safety analysis report (SAR) is essential if approval of the facility is to be obtained from the regulatory authorities. This TECDOC describes the format and content of a safety analysis report for a near surface radioactive waste disposal facility and will serve essentially as a checklist in this respect

Action taken by the french safety authorities for fire protection and fire fighting in basic nuclear plants

International Nuclear Information System (INIS)

Savornin, J.; Gibault, M.; Berger, R.; Kaluzny, Y.; Wallard, H.E.; Winter, D.

1989-03-01

The safety goal for nuclear installations is to prevent the dispersal of radioactive substances, both in the work area and outside the buildings into the environment. It is therefore at the design stage, then during construction and subsequent operation that it is necessary to take preventive measures against the outbreak of fire, and to take precautions to ensure that the consequences will always be limited. The paper describes the arrangements made by the French safety authorities to provide protection against fire in both nuclear plants and nuclear fuel cycle installations at all these stages

Design of the system of maintenance operations occupational safety and health database application of nuclear power station

International Nuclear Information System (INIS)

Wang Xuehong; Li Xiangyang; Ye Yongjun

2011-01-01

Based on the KKS code of building equipment in nuclear power station, this paper introduces the method of establishing the system of maintenance operation occupational safety and health database application. Through the application system of maintenance occupational safety and health database, it can summarize systematically all kinds of maintenance operation dangerous factor of nuclear power station, and make a convenience for staff to learn the maintenance operation dangerous factors and the prevention measures, so that it can achieve the management concept of 'precaution crucial, continuous improvement' that advocated by OSHMS. (authors)

An Integrated Intervention for Increasing Clinical Nurses’ Knowledge of HIV/AIDS-Related Occupational Safety

Directory of Open Access Journals (Sweden)

Liping He

2016-11-01

Full Text Available Background: Approximately 35 new HIV (Human Immunodeficiency Virus, HIV cases and at least 1000 serious infections are transmitted annually to health care workers. In China, HIV prevalence is increasing and nursing personnel are encountering these individuals more than in the past. Contaminated needle-stick injuries represent a significant occupational burden for nurses. Evidence suggests that nurses in China may not fully understand HIV/AIDS (Acquired immunodeficiency syndrome, AIDS and HIV-related occupational safety. At this time, universal protection precautions are not strictly implemented in Chinese hospitals. Lack of training may place nurses at risk for occupational exposure to blood-borne pathogens. Objectives: To assess the effectiveness of integrated interventions on nurses’ knowledge improvement about reducing the risk of occupationally acquired HIV infection. Methods: We audited integrated interventions using 300 questionnaires collected from nurses at the Affiliated Hospital of Xiangnan University, a public polyclinic in Hunan Province. The intervention studied was multifaceted and included appropriate and targeted training content for hospital, department and individual levels. After three months of occupational safety integrated interventions, 234 participants who completed the program were assessed. Results: Of the subjects studied, 94.3% (283/300 were injured one or more times by medical sharp instruments or splashed by body fluids in the last year and 95.3% considered their risk of occupational exposure high or very high. After the intervention, awareness of HIV/AIDS-related knowledge improved significantly (χ2 = 86.34, p = 0.00, and correct answers increased from 67.9% to 82.34%. Correct answers regarding risk perception were significantly different between pre-test (54.4% and post-test (66.6% (χ2 = 73.2, p = 0.00. When coming into contact with patient body fluids and blood only 24.0% of subjects used gloves regularly

The TSN bill concerning transparency and safety in the nuclear sector

International Nuclear Information System (INIS)

Leger, M.; Lahorgue, M.B.; Strohl, P.

2009-01-01

This document gathers together 3 articles whose common purpose is to shed light on the 13. June 2006 French law on transparency and safety in the nuclear sector. This law is fundamental because it gave, for the first time, the legal definitions of basic concepts like nuclear safety, public information or transparency. It also gave a series of principles on which the right in nuclear activities, has to rely: the principle of precaution, the principle of prevention, the principle of remedial action, the principle of who pollutes has to pay, and the principle of public information. The law gives also a clear scheme of the roles and responsibilities in the nuclear sector: the state, the government, the nuclear safety authority, the nuclear facility operator and the land (on which the nuclear facility stands) owner. (A.C.)

Radiation safety handbook for ionizing and nonionizing radiation

International Nuclear Information System (INIS)

Kincaid, C.B.

1976-10-01

The Handbook is directed primarily to users of radiation sources throughout the Food and Drug Administration. Specific precautions regarding the possession and use of radiation sources in meeting the Agency's objectives are an inherent responsibility of all employees. In addition, the increased emphasis on occupational safety and health and the responsibilities placed on the Department by Public Law and Executive Order make it mandatory that all organizational levels and activities conform to the intent of this Handbook. The policies and procedures described in this document apply to all Agency operators and activities and are intended to protect employees and the general public

Safety report concerning the reactor Pegase - volume 1 - Description of the installation - volume 2 - Safety of the installations; Rapport de surete du reacteur pegase - tome 1 - Description des installations - tome 2 - Surete des installations

Energy Technology Data Exchange (ETDEWEB)

Lacour, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legoin, P. [S.E.M. Hispano-Suiza, 92 - Colombes (France)

1964-07-01

In the first volume: This report is a description of the reactor Pegase, given with a view to examine the safety of the installations. The Cadarache site at which they are situated is briefly described, in particular because of the consequences on the techniques employed for building Pegase. A description is also given of the original aspects of the reactor. The independent loops which are designed for full-scale testing of fuel elements used in natural uranium-gas-graphite reactor systems are described in this report, together with their operational and control equipment. In the second volume: In the present report are examined the accidents which could cause damage to the Pegase reactor installation. Among possible causes of accidents considered are the seismicity of the region, an excessive power excursion of the reactor and a fracture in the sealing of an independent loop. Although all possible precautions have been taken to offset the effects of such accidents, their ultimate consequences are considered here. The importance is stressed of the security action and regulations which, added to the precautions taken for the construction, ensure the safety of the installations. (authors) [French] Dans le volume 1: Ce rapport est une description du reacteur Pegase, afin d'examiner la surete des installations. Le site de CADARACHE ou elles sont situees, a ete sommairement decrit, en particulier, a cause des consequences sur les techniques mises en oeuvre pour la realisation de Pegase. Nous nous sommes egalement attache a decrire les aspects originaux du reacteur. Les boucles autonomes destinees a tester en vraie grandeur des elements combustibles de la filiere uranium naturel graphite-gaz, ainsi que leurs dispositifs de controle et d'exploitation, figurent egalement dans ce rapport. Dans le volume 2: Dans le present rapport, nous examinons des accidents pouvant endommager des installations du reacteur Pegase. Les origines d'accidents examines

Safety report concerning the reactor Pegase - volume 1 - Description of the installation - volume 2 - Safety of the installations; Rapport de surete du reacteur pegase - tome 1 - Description des installations - tome 2 - Surete des installations

Energy Technology Data Exchange (ETDEWEB)

Lacour, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legoin, P [S.E.M. Hispano-Suiza, 92 - Colombes (France)

1964-07-01

In the first volume: This report is a description of the reactor Pegase, given with a view to examine the safety of the installations. The Cadarache site at which they are situated is briefly described, in particular because of the consequences on the techniques employed for building Pegase. A description is also given of the original aspects of the reactor. The independent loops which are designed for full-scale testing of fuel elements used in natural uranium-gas-graphite reactor systems are described in this report, together with their operational and control equipment. In the second volume: In the present report are examined the accidents which could cause damage to the Pegase reactor installation. Among possible causes of accidents considered are the seismicity of the region, an excessive power excursion of the reactor and a fracture in the sealing of an independent loop. Although all possible precautions have been taken to offset the effects of such accidents, their ultimate consequences are considered here. The importance is stressed of the security action and regulations which, added to the precautions taken for the construction, ensure the safety of the installations. (authors) [French] Dans le volume 1: Ce rapport est une description du reacteur Pegase, afin d'examiner la surete des installations. Le site de CADARACHE ou elles sont situees, a ete sommairement decrit, en particulier, a cause des consequences sur les techniques mises en oeuvre pour la realisation de Pegase. Nous nous sommes egalement attache a decrire les aspects originaux du reacteur. Les boucles autonomes destinees a tester en vraie grandeur des elements combustibles de la filiere uranium naturel graphite-gaz, ainsi que leurs dispositifs de controle et d'exploitation, figurent egalement dans ce rapport. Dans le volume 2: Dans le present rapport, nous examinons des accidents pouvant endommager des installations du reacteur Pegase. Les origines d'accidents examines comprennent la seismicite

Cluster of cases of severe acute respiratory syndrome among Toronto healthcare workers after implementation of infection control precautions: a case series.

Science.gov (United States)

Ofner-Agostini, Marianna; Gravel, Denise; McDonald, L Clifford; Lem, Marcus; Sarwal, Shelley; McGeer, Allison; Green, Karen; Vearncombe, Mary; Roth, Virginia; Paton, Shirley; Loeb, Mark; Simor, Andrew

2006-05-01

To review the severe acute respiratory syndrome (SARS) infection control practices, the types of exposure to patients with SARS, and the activities associated with treatment of such patients among healthcare workers (HCWs) who developed SARS in Toronto, Canada, after SARS-specific infection control precautions had been implemented. A retrospective review of work logs and patient assignments, detailed review of medical records of patients with SARS, and comprehensive telephone-based interviews of HCWs who met the case definition for SARS after implementation of infection control precautions. Seventeen HCWs from 6 hospitals developed disease that met the case definition for SARS after implementation of infection control precautions. These HCWs had a mean age (+/-SD) of 39+/-2.3 years. Two HCWs were not interviewed because of illness. Of the remaining 15, only 9 (60%) reported that they had received formal infection control training. Thirteen HCWs (87%) were unsure of proper order in which personal protective equipment should be donned and doffed. Six HCWs (40%) reused items (eg, stethoscopes, goggles, and cleaning equipment) elsewhere on the ward after initial use in a room in which a patient with SARS was staying. Use of masks, gowns, gloves, and eyewear was inconsistent among HCWs. Eight (54%) reported that they were aware of a breach in infection control precautions. HCWs reported fatigue due to an increased number and length of shifts; participants worked a median of 10 shifts during the 10 days before onset of symptoms. Seven HCWs were involved in the intubation of a patient with SARS. One HCW died, and the remaining 16 recovered. Multiple factors were likely responsible for SARS in these HCWs, including the performance of high-risk patient care procedures, inconsistent use of personal protective equipment, fatigue, and lack of adequate infection control training.

Programmable Electronic Safety Systems

International Nuclear Information System (INIS)

Parry, R.

1993-05-01

Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement failsafe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

Investigation of Fire Safety Awareness and Management in Mall

Directory of Open Access Journals (Sweden)

Abdul Rahim N.

2014-03-01

Full Text Available In spite of having sufficient fire safety system installed in buildings, the incidence of fire hazard becomes the furthermost and supreme threat to health and safety, as well as property to any community. In order to make sure that the safety of the building and its users, the fundamental features depends on the fire precaution system and equipment which should be according to the standard requirements. Nevertheless, the awareness on fire safety could necessarily alleviate the damages or rate of fatality during the event of fire. This paper presents the results on the investigation of fire safety awareness and management, concentrating on shopping mall. The endeavour of this study is to explore the level of fire safety knowledge of the users in the mall, and to study the effectiveness level of fire safety management in a mall. From the study, public awareness is highly related to understanding human behaviour and their personal background. The respondents’ levels of awareness are rather low, which reflects on their poor action when facing emergency situation during fire. The most effective methods identified to improve the awareness and effectiveness of fire safety level is through involvement in related fire safety programmes, distribution of pamphlets or brochures on fire safety and appointing specific personnel for Emergency Response Team in the mall.

Review of safety precautions derived from six-year experience of a spent fuel reprocessing plant - Centre de Marcoule; Elements de securite tires de six annees d'exploitation de l'usine de traitement de combustibles irradies du Centre de Marcoule

Energy Technology Data Exchange (ETDEWEB)

Rodier, J [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

1964-07-01

In a center for the processing of irradiated fuels, as in any other factory, continuity of production can only be achieved through constant effort to maintain the standard of safety. The authors examine the safety elements inherent in the design of the installations, from the point of view of both radioactive and conventional protection. It is clear that in the nuclear industry it is not sufficient merely to adopt the usual precautions against the risks of explosion, fire, etc...; but great attention must be paid to the problems arising from the confinement of materials, radioactivity and the risks of criticality. The general principles of the technical prevention of radioactive risks are now well known. They must be applied as soon as the plans are drawn up for the installations, by taking into account : - the design and construction of the installations with respect to the risks mentioned above - the division of the plant into zones - the circulation of personnel and material - ventilation and purification of the air. The technical safety factors however, are not sufficient in themselves. However good the material and the degree of automation achieved, the smooth running of a factory depends on the man responsible for supervision and repair work or who takes initiatives. Technical safety is never definitive and must be continually maintained. The collaboration of the workers is necessary to its efficiency. Psychological measures must thus be taken as an addition to the technical precautions. This psychological prevention is based on: - education of the personnel - organization of the work and definition of the safety rules - checking on obedience to the rules and behaviour of the personnel - constant reminders of the necessity for the prevention of radioactive risks. Six years operation of the irradiated fuel processing plant at Marcoule have shown the importance of close collaboration between workers and technique. The authors analyse the results obtained from

Degowning the controversies of contact precautions for methicillin-resistant Staphylococcus aureus: A review.

Science.gov (United States)

Kullar, Ravina; Vassallo, Angela; Turkel, Sarah; Chopra, Teena; Kaye, Keith S; Dhar, Sorabh

2016-01-01

Contact precautions (CPs) are recommended to prevent methicillin-resistant Staphylococcus aureus (MRSA) transmission in institutions. Rising doubts about CP effectiveness and recognition of unintended consequences for patients have raised questions about the benefit. The objective of this study was to evaluate the effectiveness and adverse outcomes associated with CPs for prevention of MRSA transmission. We searched PubMed, Embase, and the Cochrane Library for articles related to effectiveness and adverse outcomes of CPs in patients with MRSA. Criteria for inclusion included the following: articles conducted in the United States, articles performed in an acute care setting, articles that were not a case series or review, and those with standardized collection of data or inclusion of case and control groups. Results were summarized and examined for potential limitations. Recommendations were based on our findings. CPs reduced MRSA transmission in epidemic settings and in instances with high compliance, but a decrease in infection rates was not shown. Unintended consequences of CPs include decreased health care provider (HCP) time spent with patients, low HCP compliance, decreased perceptions of comfort from patients, and greater likelihood of patient complaints and negative psychologic implications. In endemic settings, there are few data to support routine use of CPs to control the spread of MRSA. Education should be performed in hospitals to improve patients' perception of care and understanding of CPs when implemented and HCPs' adherence to good hand hygiene and standard precautions practices. Published by Elsevier Inc.

Sodium safety manual

International Nuclear Information System (INIS)

Hayes, D.J.; Gardiner, R.L.

1980-09-01

The sodium safety manual is based upon more than a decade of experience with liquid sodium at Berkeley Nuclear Laboratories (BNL). It draws particularly from the expertise and experience developed in the course of research work into sodium fires and sodium water reactions. It draws also on information obtained from the UKAEA and other sodium users. Many of the broad principles will apply to other Establishments but much of the detail is specific to BNL and as a consequence its application at other sites may well be limited. Accidents with sodium are at best unpleasant and at worst lethal in an extremely painful way. The object of this manual is to help prevent sodium accidents. It is not intended to give detailed advice on specific precautions for particular situations, but rather to set out the overall strategy which will ensure that sodium activities will be pursued safely. More detail is generally conveyed to staff by the use of local instructions known as Sodium Working Procedures (SWP's) which are not reproduced in this manual although a list of current SWP's is included. Much attention is properly given to the safe design and operation of larger facilities; nevertheless evidence suggests that sodium accidents most frequently occur in small-scale work particularly in operations associated with sodium cleaning and special care is needed in all such cases. (U.K.)

Cultural Adaptation and Reliability of the Compliance with Standard Precautions Scale (CSPS) for Nurses in Brazil 1

Science.gov (United States)

Pereira, Fernanda Maria Vieira; Lam, Simon Ching; Gir, Elucir

2017-01-01

ABSTRACT Objective: this study aimed to carry of the cultural adaptation and to evaluate the reliability of the Compliance with Standard Precautions Scale (CSPS) for nurses in Brazil. Method: the adaptation process entailed translation, consensus among judges, back-translation, semantic validation and pretest. The reliability was evaluated by internal consistency (Cronbach alpha) and stability (test-retest). The instrument was administered to a sample group of 300 nurses who worked in a large hospital located in the city of São Paulo/SP, Brazil. Results: through the semantic validation, the items from the scale were considered understandable and deemed important for the nurse´s clinical practice. The CSPS Brazilian Portuguese version (CSPS-PB) revealed excellent interpretability. The Cronbach`s alpha was 0.61 and the intraclass correlation coefficient was 0.85. Conclusion: the initial study showed that CSPS-PB is appropriate to assess compliance with standard precautions among nurses in Brazil. The reliability was considered acceptable. Furhter study is necessary to evaluate its comprehensive psychometric properties. PMID:28301030

Stretching the frontiers of precaution

Directory of Open Access Journals (Sweden)

Derek Osborn

2002-09-01

Full Text Available The increasing pace and impact of technological change in the world underline the growing need for taking due precautions. In this essay the author reviews a number of cases over the past 2 centuries where new technologies have been introduced too rapidly with too little attention to possible consequences and avoidable damage to health or the environment has been caused. The author goes on to discuss the precautionary approach to new technology, and urges more widespread use of it. He underlines the importance of 4 key points: (1 technology must not be demonised as the enemy - wise use of technology and technological solutions are themselves part of a precautionary approach; (2 a concern for social and environmental justice must be part of a broad precautionary approach - innovations which may potentially benefit one group while putting other groups at risk are very problematic; (3 we must safeguard the public realm and its ability to weigh up proposed innovations and new processes dispassionately - the privatisation of regulation and management of safeguards is very dangerous; (4 innovation and the management of precautionary safeguards are too important to be left to experts or governments alone - there must be sufficient public understanding and support for the introduction of new technologies with all the risks they may involve if public confidence is not to be eroded and greater restrictions imposed. The precautionary approach does not claim to be the answer to all issues concerning the wise use of new technologies. But it does point the way to how we can use public policy frameworks and processes to guide and constrain technological developments in the most appropriate way, and avoid some of the worst possible outcomes. At a time of accelerating technological change and overwhelming human dominance of the natural environment it is vital that we make wise use of this approach.

A Guide to Laser Safety

Energy Technology Data Exchange (ETDEWEB)

Davies, W M

1998-09-01

In one of the few volumes dedicated to laser safety to appear since the 'bible' of Sliney and Wolbarsht, Roy Henderson sets out to provide the reader with a practical account of both the philosophy and practice across contemporary application of lasers. The book is split into three sections. The first section is essentially a non-mathematical review of lasers, optical hazards and laser safety. It is intended as an easily digestible introduction to the subject, conveying the primary concepts of laser safety without the camouflage of equations. This piece of text is manifestly readable by all who have interest in the topic. The second section introduces more meat onto the bones introduced in the first section and some of the practical mathematics necessary to determine optical irradiance in simple laser beams. The book is not intended as a scientific treatise and rigorous treatment of laser physics is left (for the better) to other texts. Laser hazard assessment and safety management are covered in sufficient detail to allow the reader to understand what precautions are necessary to mitigate the risks of laser use. The final section takes a brief look at laser safety in a number of specific industrial applications. These include industrial processing, medicine, telecommunications and entertainment. These should be taken in the context of the second section and are not stand-alone text. With few typographical errors, and packed with practical hints, this book serves as an excellent text for any educational course on laser safety and provides a quick and easy reference for laser safety officers. (book review: A Roy Henderson - ISBN: 0 412 72940 7)

Programmable electronic safety systems

International Nuclear Information System (INIS)

Parry, R.R.

1993-01-01

Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement fail-safe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

Layout of the safety analysis report for nuclear power plants with pressurized water reactor or boiling water reactor in the Federal Republic of Germany

International Nuclear Information System (INIS)

Albrecht, E.

1980-01-01

For a licence according to paragraph 7 of the Atomic Energy Act to construct and operate a nuclear power plant, the applicant has to submit a safety analysis report, which must describe the site, the plant, all hazards in connection with the plant and the proposed safety precautions. For the structure and the content of a safety analysis report, a first guideline was published in 1959. Only a few safety analysis reports were prepared nearly strictly according to this guideline. In 1976 a second guideline was published for a standard safety analysis report. The lecture deals with the guidelines. A survey over the structure and content of the German safety analysis reports will be given. The experience gained by the new safety analysis reports will be discussed. (orig.)

21 CFR 1040.30 - High-intensity mercury vapor discharge lamps.

Science.gov (United States)

2010-04-01

... use. (4) Outer envelope means the lamp element, usually glass, surrounding a high-pressure arc... than a few minutes unless adequate shielding or other safety precautions are used. Lamps that will... unless adequate shielding or other safety precautions are used. Lamps that will automatically extinguish...

Suggestion on the safety classification of spent fuel dry storage in China’s pressurized water reactor nuclear power plant

Science.gov (United States)

Liu, Ting; Qu, Yunhuan; Meng, De; Zhang, Qiaoer; Lu, Xinhua

2018-01-01

China’s spent fuel storage in the pressurized water reactors(PWR) is stored with wet storage way. With the rapid development of nuclear power industry, China’s NPPs(NPPs) will not be able to meet the problem of the production of spent fuel. Currently the world’s major nuclear power countries use dry storage as a way of spent fuel storage, so in recent years, China study on additional spent fuel dry storage system mainly. Part of the PWR NPP is ready to apply for additional spent fuel dry storage system. It also need to safety classificate to spent fuel dry storage facilities in PWR, but there is no standard for safety classification of spent fuel dry storage facilities in China. Because the storage facilities of the spent fuel dry storage are not part of the NPP, the classification standard of China’s NPPs is not applicable. This paper proposes the safety classification suggestion of the spent fuel dry storage for China’s PWR NPP, through to the study on China’s safety classification principles of PWR NPP in “Classification for the items of pressurized water reactor nuclear power plants (GB/T 17569-2013)”, and safety classification about spent fuel dry storage system in NUREG/CR - 6407 in the United States.

Safety evaluation of interim stabilization of non-stabilized single-shell watch list tanks

International Nuclear Information System (INIS)

Stahl, S.M.

1994-01-01

This report provides results of a review of recently completed safety analyses related to hazards associated with Interim Stabilization of Single analyses related to hazards included oh the Hanford Site Waste Tank-Watch Shell Tanks (SSTs) that are included on the Hanford List. The purpose of the review was to identify and summarize conclusions regarding the safety of interim stabilization of Watch List SSTs, and to highlight applicable limitations, restrictions, and controls. The scope of this review was restricted to SSTs identified List in the categories of flammable gas ferrocyanide, and organic salts. High heat tanks were not included in the scope. A Watch List tank is defined as an underground storage tank containing waste that requires special safety precautions because it may have a serious potential for release of high level radioactive waste because of uncontrolled increases in temperature or pressure. Special restrictions have been placed on these tanks

Scientists versus Regulators: Precaution, Novelty & Regulatory Oversight as Predictors of Perceived Risks of Engineered Nanomaterials

Science.gov (United States)

Beaudrie, Christian E. H.; Satterfield, Terre; Kandlikar, Milind; Harthorn, Barbara H.

2014-01-01

Engineered nanoscale materials (ENMs) present a difficult challenge for risk assessors and regulators. Continuing uncertainty about the potential risks of ENMs means that expert opinion will play an important role in the design of policies to minimize harmful implications while supporting innovation. This research aims to shed light on the views of ‘nano experts’ to understand which nanomaterials or applications are regarded as more risky than others, to characterize the differences in risk perceptions between expert groups, and to evaluate the factors that drive these perceptions. Our analysis draws from a web-survey (N = 404) of three groups of US and Canadian experts: nano-scientists and engineers, nano-environmental health and safety scientists, and regulatory scientists and decision-makers. Significant differences in risk perceptions were found across expert groups; differences found to be driven by underlying attitudes and perceptions characteristic of each group. Nano-scientists and engineers at the upstream end of the nanomaterial life cycle perceived the lowest levels of risk, while those who are responsible for assessing and regulating risks at the downstream end perceived the greatest risk. Perceived novelty of nanomaterial risks, differing preferences for regulation (i.e. the use of precaution versus voluntary or market-based approaches), and perceptions of the risk of technologies in general predicted variation in experts' judgments of nanotechnology risks. Our findings underscore the importance of involving a diverse selection of experts, particularly those with expertise at different stages along the nanomaterial lifecycle, during policy development. PMID:25222742

Scientists versus regulators: precaution, novelty & regulatory oversight as predictors of perceived risks of engineered nanomaterials.

Directory of Open Access Journals (Sweden)

Christian E H Beaudrie

Full Text Available Engineered nanoscale materials (ENMs present a difficult challenge for risk assessors and regulators. Continuing uncertainty about the potential risks of ENMs means that expert opinion will play an important role in the design of policies to minimize harmful implications while supporting innovation. This research aims to shed light on the views of 'nano experts' to understand which nanomaterials or applications are regarded as more risky than others, to characterize the differences in risk perceptions between expert groups, and to evaluate the factors that drive these perceptions. Our analysis draws from a web-survey (N = 404 of three groups of US and Canadian experts: nano-scientists and engineers, nano-environmental health and safety scientists, and regulatory scientists and decision-makers. Significant differences in risk perceptions were found across expert groups; differences found to be driven by underlying attitudes and perceptions characteristic of each group. Nano-scientists and engineers at the upstream end of the nanomaterial life cycle perceived the lowest levels of risk, while those who are responsible for assessing and regulating risks at the downstream end perceived the greatest risk. Perceived novelty of nanomaterial risks, differing preferences for regulation (i.e. the use of precaution versus voluntary or market-based approaches, and perceptions of the risk of technologies in general predicted variation in experts' judgments of nanotechnology risks. Our findings underscore the importance of involving a diverse selection of experts, particularly those with expertise at different stages along the nanomaterial lifecycle, during policy development.

Establishment of radiation protection and safety programme in Nuclear Medicine

International Nuclear Information System (INIS)

Chene, E.

2014-04-01

Radiation is useful because of its ability to penetrate tissue, allowing imaging of internal structures. However radiation may produce harmful biological effects. Observations of exposed human populations and animal experimentation indicate that exposure to low levels of radiation over a period of time may lead to stochastic radiation effects. Exposures to high levels of radiation above threshold also leads to deterministic effects. Establishment of radiation protection and safety programme and implement it without fail may help prevent deterministic effect and limit chances of stochastic effects. This is achieved by assigning responsibilities to the proposed organizational structure, management commitment to safety culture by providing continuous education and training to employees, regular reviewing and auditing of radiation safety policies. Occupational, public and environmental radiation exposure is further achieved by implementation of set local rules and operational procedures, proper management of radioactive waste and safe transport of radioactive material. Medical radiation exposure is achieved by justified procedures, optimization of doses, guidance levels, quality assurance and quality control programme through image quality, radiopharmaceutical quality and records keeping of radiation doses, calibration certificates of equipment used, equipment service and test certificates. Diagnostic radiopharmaceuticals must deliver the minimum possible radiation dose to the patient while therapeutic radiopharmaceuticals must deliver the maximum dose to the target organ or tissue, while minimizing the dose to non-target tissues such as the bone marrow. Special considerations shall be given to pregnant and breast-feeding patients. The proper facility design and shielding of a nuclear medicine facility shall further provide for the radiation protection to the worker, the patient, public and the environment. Precautions should be given to radioactive patients as there

Mobbing Experiences of Instructors: Causes, Results, and Solution Suggestions

Science.gov (United States)

Celep, Cevat; Konakli, Tugba

2013-01-01

In this study, it was aimed to investigate possible mobbing problems in universities, their causes and results, and to attract attention to precautions that can be taken. Phenomenology as one of the qualitative research methods was used in the study. Sample group of the study was selected through the criteria sampling method and eight instructors…

Safety precautions of Dover Channel Tunnel boring machine; Kaitei tonneru kussakuki to anzen

Energy Technology Data Exchange (ETDEWEB)

Kondo, Y.; Fujioka, K. [Kawasaki Heavy Industries Ltd., Kobe (Japan)

1995-02-15

In May 6th 1994, the Dover Channel Tunnel referred to the largest project in this century has been opened for traffic. France and England, which have been separated by the strait with a width of about 38 km, have been connected through the submarine railway tunnel and became to be a land continuation. Since Napoleon the first, who conquested European Continent, has made a tunnel construction plan towards England, in really 27th planning, the Eurotunnel, which has been a dream in Europe for 200 years, was realized. A position of this tunnel is at a depth of 100 m under marine surface, and a geology of the strait part is a chalk layer with a calcium carbonate as a main component. For a tunnel excavation, 6 units in England side, and 5 units in France side, and therefore total 11 units of tunnel boring machines were used. Out of them, in 2 tunnels for train from France side, 2 units of tunnel boring machine (TBM) made in Japan were used. In this paper a structure and excavation method of TBM was explained, and a safety countermeasure of TBM adopted in this project was outlined. 1 ref., 10 figs.

Have IAEA safety precautions failed in Iraq

International Nuclear Information System (INIS)

Gruemm, H.

1981-01-01

Israel's air raid on the Tamuz-1 research reactor (Osirak) in Iraq has given new impetus to the discussion of the potential and limits of international control as carried out by the IAEA in the framework of the non-proliferation treaty. A lack of faith in the effectiveness of IAEA control must be assuemd to be one of the main reasons for this attack. Prof. Grimm, vice chairman of the nuclear safeguards department of the International Atomic Energy Agency, comments on the possibility of producing nuclear weapons with the aid of this reactor and on the efficiency of present and projected nuclear safeguards measures. (orig.) [de

[Quantitative assessment of fungal risk in the case of construction works in healthcare establishments: Proposed indicators for the determination of the impact of management precautions on the risk of fungal infection].

Science.gov (United States)

Gangneux, J-P; Adjidé, C-C; Bernard, L; Botterel, F; Carel, A; Castel, O; Derouin, F; Hoarau, G; Labussière, H; Lafaurie, M; Millon, L; Pottecher, B; Thiebaut, A; Turco, M; Baron, R

2012-03-01

Construction works in healthcare establishments produce airborne fungal spores and considerably increase the risk of exposure of immunosuppressed patients. It is necessary to reinforce protective measures, or even to implement specific precautions, during this critical phase. The aim of these precautions is to protect both those areas, which are susceptible to dust, and patients at risk of a fungal infection particularly invasive aspergillosis. When construction works are planned in healthcare establishments, the first step consists in the characterisation of the environmental fungal risk and the second one in proposing risk management methods. It is then essential to establish impact indicators in order to evaluate the risk management precautions applied. The working group promoted by the French societies of medical mycology and hospital hygiene (SFMM & SF2H) details here both environmental and epidemiological impact indicators that can be used. Copyright © 2012. Published by Elsevier SAS.

Barriers to standard precautions adherence in a dental school in Iran: a qualitative study.

Science.gov (United States)

Hedayati, Hamidreza; Marjadi, Brahmaputra; Askarian, Mehrdad

2014-07-01

Setting up good infection control practices in educational institutions is crucial in shaping future health professionals. The implementation of standard precautions (SPs) in Iranian dental schools has not been explored qualitatively to identify barriers to good practice. Twelve focus group discussions and 8 semistructured interviews were conducted with students, residents, and staff members (n = 83) of the Shiraz University of Medical Sciences Dental School. The interview guide addressed performance, subjective norms, and behavioral control domains of SP-related behaviors. Thematic analysis was performed manually to identify barriers to SP practices. Proximal factors of poor SP adherence were a lack of knowledge and technical difficulties. These factors were compounded by intermediate factors in the work environment: lack of facilities, heavy workload, patient expectations, interprofessional conflicts, and lack of good role models. Two underlying distal factors were financial issues and unsupportive organizational culture. The social constructionism theory was useful in analyzing the situation and suggesting an educational approach as part of the solution. Complex and intertwined barriers of SP adherence were found in this dental school. A social construction approach may assist in addressing these problems by shifting the culture through education to construct a contextual new knowledge. Further research in medical sociology of SP practices would be useful. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Integrating Safety and Security in the EU: Past developments and suggested ways forward

International Nuclear Information System (INIS)

Rossi, Loris

2016-01-01

The Framework provided by the UN Model Regulation for the Transport of Dangerous Goods is the core of the legislation on transport of radioactive material (and all classes of dangerous goods) in the EU. This has resulted in European agreements ADR, RID and ADN for international transport as well as a single directive for land transport within the EU. In addition the EU has adopted a range of directives and regulations dealing specifically with several aspects of safety of nuclear and radioactive material. While the overall safety framework is now well developed and fairly stable, a security framework is evolving, based on the IAEA recommendations. In the EU, several initiatives such as the CBRN action plan and the review of the application of telematics for the transport of dangerous goods will most likely result in more developments coming on stream in the near future. This suggests that an integrated approach would be beneficial to avoid divergent developments and to keep track of new developments in an orderly fashion. An integrated approach for a safe and secure supply chain for radioactive material is proposed. The framework for a supply chain can be built around the extensive corpus of legislation/recommendations and concepts that are already existing (such as the “Known Consignor” in the framework of the EU aviation security or the “Authorised Economic Operator” in the EU Community Custom Code). This would allow for the need to maintain control of the numerous proposals that are taking place. Advantages and drawbacks are outlined. More generally, the development of an integrated safe and secure supply chain would bring clarity and transparency to the overall system of provisions for a safe and secure management of radioactive material. (author)

Radiation protection and safety in the Australian Defence Organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.

1995-01-01

Very few organisations have to address such a diverse and complex range of radiation safety matters as the Australian Defence Organisation. The Australian Defence Force and the Department of Defence (its military and civilian branches) have to comply with strict regulations in normal peace time activities. The Surgeon-General, to whom responsibility for policy in radiation protection and safety falls, has established a Defence Radiation Safety Committee, which in turn oversees four specialist subcommittees. Their tasks include recommending policy and doctrine in relation to radiation safety, overseeing the implementation of appropriate regulations, monitoring their compliance. generating the relevant documentation (particularly on procedures to be followed), developing and improving any necessary training courses, and providing sound technical advice whenever and to whomever required. The internal Defence regulations do not permit radiation doses to exceed those limits recommended by the Australian National Health and Medical Research Council and precautions are taken to ensure during normal peace time duties that these levels are not exceeded. At times of national emergency, the Surgeon-General provides guidance and advice to military commanders on the consequences of receiving dose levels that would not be permitted during normal peace time activities. The paper describes the methods adopted to implement such arrangements

Cultural Adaptation and Reliability of the Compliance with Standard Precautions Scale (CSPS) for Nurses in Brazil.

Science.gov (United States)

Pereira, Fernanda Maria Vieira; Lam, Simon Ching; Gir, Elucir

2017-03-02

this study aimed to carry of the cultural adaptation and to evaluate the reliability of the Compliance with Standard Precautions Scale (CSPS) for nurses in Brazil. the adaptation process entailed translation, consensus among judges, back-translation, semantic validation and pretest. The reliability was evaluated by internal consistency (Cronbach alpha) and stability (test-retest). The instrument was administered to a sample group of 300 nurses who worked in a large hospital located in the city of São Paulo/SP, Brazil. through the semantic validation, the items from the scale were considered understandable and deemed important for the nurse´s clinical practice. The CSPS Brazilian Portuguese version (CSPS-PB) revealed excellent interpretability. The Cronbach`s alpha was 0.61 and the intraclass correlation coefficient was 0.85. the initial study showed that CSPS-PB is appropriate to assess compliance with standard precautions among nurses in Brazil. The reliability was considered acceptable. Furhter study is necessary to evaluate its comprehensive psychometric properties. adaptar culturalmente y evaluar la confiabilidad de la Compliance with Standard Precautions Scale (CSPS) para enfermeros en Brasil. el proceso de adaptación abarcó la traducción, consenso entre jueces, retrotraducción, validación semántica y pretest. La confiabilidad fue evaluada mediante la consistencia interna (alfa de Cronbach) y estabilidad (test-retest). El instrumento fue administrado a una muestra de 300 enfermeros actuantes en un gran hospital ubicado en la ciudad de São Paulo/SP, Brasil. a través de la validación semántica, los ítems de la escala fueron considerados comprensibles e importantes para la práctica clínica enfermera. La versión en portugués de Brasil de la CSPS (CSPS-PB) reveló excelente posibilidad de interpretación. El alfa de Cronbach correspondió a 0.61 y el coeficiente de correlación intraclase fue 0.85. el estudio inicial mostró que la CSPS-PB es

Universal isolation precautions for patients at an academic hospital Precauciones universales en el aislamiento de pacientes en un hospital universitario Precauções universais em isolamentos de pacientes em hospital universitário

OpenAIRE

Vanessa Gomes Maziero; Marli Terezinha Oliveira Vannuchi; Dagmar Willamourius Vituri; Maria do Carmo Lourenço Haddad; Cristiane Nakaya Tada

2012-01-01

OBJECTIVE: To apply universal isolation precautions for patients at an academic hospital by a nursing team. METHODS: This descriptive and prospective study used data from advice service of quality control and nursing care that were gathered in observational reports of universal isolation precautions for patients admitted in two surgical inpatient units during 2008 and 2010. RESULTS: The mean general classification for both units was between desirable and adequate in the observational analysis...

Emissions generated during laser cutting; safety precautions; Emissions produits lors du coupage au laser; mesures de securite

Energy Technology Data Exchange (ETDEWEB)

Haferkamp, H.; Goede, M.; Puster, T.; Seebaum, D. [Laser Eentrum, Hanovre (Germany); Bach, F. [Institut fur Werkstoffkunde, Universite de Hanovre (Germany)

1999-07-01

The generation of particulate and gaseous emissions from metals and organic materials during CO{sub 2} and Nd:YAG laser cutting is described. The laser-generated air contaminants (LGAC's) are characterised in terms of their quantity, composition, and chemical complexity, and the emissions are assessed on an occupational medicine basis. The hazard potential of LGAC's are mentioned, and safety systems are discussed.

A RULE-BASED SYSTEM APPROACH FOR SAFETY MANAGEMENT IN HAZARDOUS WORK SYSTEMS

Directory of Open Access Journals (Sweden)

Ercüment N. DİZDAR

1998-03-01

Full Text Available Developments in technology increased the importance of safety management in work life. These improvements also resulted in a requirement of more investment and assignment on human in work systems. Here we face this problem: Can we make it possible to forecast the possible accidents that workers can face, and prevent these accidents by taking necessary precautions? In this study made, we aimed at developing an rule-based system to forecast the occupational accidents in coming periods at the departments of the facilities in hazardous work systems. The validity of the developed system was proved by implementing it into practice in hazardous work systems in manufacturing industry.

Renovated Korean nuclear safety and security system: A review and suggestions to successful settlement

Energy Technology Data Exchange (ETDEWEB)

Chung, W. S.; Yun, S. W.; Lee, D. S. [Korea Atomic Energy Research Inst., Dukjin-dong 150, Yusung-gu, Daejon, R.O., 305-353 (Korea, Republic of); Go, D. Y. [Kyung Hee Univ., Kyung Hee daero 26, Dongdaemoon-gu, Seoul, R.O., 130-701 (Korea, Republic of)

2012-07-01

Questions of whether past nuclear regulatory body of Korea is not a proper system to monitor and check the country's nuclear energy policy and utilization have been raised. Moreover, a feeling of insecurity regarding nuclear safety after the nuclear accident in Japan has spread across the public. This has stimulated a renovation of the nuclear safety regime in Korea. The Nuclear Safety and Security Commission (NSSC) was launched on October 26, 2011 as a regulatory body directly under the President in charge of strengthening independence and nuclear safety. This was a meaningful event as the NSSC it is a much more independent regulatory system for Korea. However, the NSSC itself does not guarantee an enhanced public acceptance of the nuclear policy and stable use nuclear energy. This study introduces the new NSSC system and its details in terms of organization structure, appropriateness of specialty, budget stability, and management system. (authors)

Advanced power reactors with improved safety characteristics

International Nuclear Information System (INIS)

Birkhofer, A.

1994-01-01

The primary objective of nuclear safety is the protection of individuals, society and environment against radiological hazards from accidental releases of radioactive materials contained in nuclear reactors. Hereto, these materials are enclosed by several successive barriers and the barriers protected against mishaps and accidents by a multi-level system of safety precautions. The evolution of reactor technology continuously improves this concept and its implementation. At a world-wide scale, several advanced reactor concepts are currently being considered, some of them already at a design stage. Essential safety objectives include both further strengthening the prevention of accidents and improving the containment of fission products should an accident occur. The proposed solutions differ considerably with regard to technical principles, plant size and time scales considered for industrial application. Two typical approaches can be distinguished: The first approach basically aims at an evolution of power reactors currently in use, taking into account the findings from safety research and from operation of current plants. This approach makes maximum use of proven technology and operating experience but may nevertheless include new safety features. The corresponding designs are often termed 'large evolutionary'. The second approach consists in more fundamental changes compared to present designs, often with strong emphasis on specific passive features protecting the fuel and fuel cladding barriers. Owing to the nature and capability of those passive features such 'innovative designs' are mostly smaller in power output. The paper describes the basic objectives of such developments and illustrates important technical concepts focusing on next generation plants, i.e. designs to be available for industrial application until the end of this decade. 1 tab. (author)

Screening and contact precautions – A survey on infection control measures for multidrug-resistant bacteria in German university hospitals

Directory of Open Access Journals (Sweden)

Lena M. Biehl

2017-04-01

Full Text Available Abstract To assess the scope of infection control measures for multidrug-resistant bacteria in high-risk settings, a survey among university hospitals was conducted. Fourteen professionals from 8 sites participated. Reported policies varied largely with respect to the types of wards conducting screening, sample types used for screening and implementation of contact precautions. This variability among sites highlights the need for an evidence-based consensus of current infection control policies.

Technical organization of safety authorities in case of accident in a nuclear installation

International Nuclear Information System (INIS)

Scherrer, J.; Evrard, J.M.; Ney, J.

1985-11-01

The Central safety Service of Nuclear Facilities of the French industry Department and the CEA Protection and Nuclear Safety Institut (IPSN) are organized to estimate in real time, the evolution of an accidental situation with a sufficient margin in time to allow the local government representative to develop, in case of necessity, efficient procedures for the protection of the population. This paper presents the principles of this organization and the precautions taken to cope as well with problems of mobilization of experts as the full occupation of current telecommunication lines. The example of the organization concerning the installations of Electricite de France is detailed. The CEA IPSN has developed means widely advanced, concerning the atmospheric transfer of radioactivity. For PWRs, a method allowing to forecast releases in case of accidental situation is presented. Finally, the knowledge acquired with the accident simulations realized during the last years is described [fr

Electrical Safety Program: Nonelectrical Crafts at LANL, Live #12175

Energy Technology Data Exchange (ETDEWEB)

Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-12-22

Los Alamos National Laboratory (LANL) and the federal government require those working with or near electrical equipment to be trained on electrical hazards and how to avoid them. Although you might not be trained to work on electrical systems, your understanding of electricity, how it can hurt you, and what precautions to take when working near electricity could save you or others from injury or death. This course, Electrical Safety Program: Nonelectrical Crafts at LANL (12175), provides knowledge of basic electrical concepts, such as current, voltage, and resistance, and their relationship to each other. You will learn how to apply these concepts to safe work practices while learning about the dangers of electricity—and associated hazards—that you may encounter on the job. The course also discusses what you can do to prevent electrical accidents and what you should do in the event of an electrical emergency. The LANL Electrical Safety Program is defined by LANL Procedure (P) 101-13. An electrical safety officer (ESO) is well versed in this document and should be consulted regarding electrical questions. Appointed by the responsible line manager (RLM), ESOs can tell you if a piece of equipment or an operation is safe or how to make it safe.

Thefts, break-ins, etc.: Taking precautions is the best means of protection

CERN Multimedia

Property Protection Group

2004-01-01

As the summer holidays approach, you are strongly recommended, in your own interest as well as that of your colleagues and of the Organization, to take the following precautions: Money, valuables & keys: Do not leave money or valuables in your office or your lockers. If possible, valuable items (such as laptops, cameras, tools, projectors) must be locked away inside a piece of furniture. Keys and duplicates should be removed or kept in a safe place. Doors & windows: Lock all doors to offices, workshops and meeting-rooms, etc., when you leave. Also close the windows if they are easily accessible from outside. Reporting incidents: Each crime solved could prevent another from being perpetrated. Please report any thefts, losses, objects gone missing and other incidents to the CERN Fire Brigade (tel. 74848) and keep them informed of any important developments (objects found, new clues, suspicious people or vehicles, etc.). The Property Protection Group would like to wish you a very good holiday...

Operation Praetorian onsite radiological safety report, October 1981-September 1982

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1983-09-01

PRAETORIAN was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1981 through September 30, 1982. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection instruments surveyed reentry routes into ground zeros before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

Operation QUICKSILVER. Onsite radiological safety report, October 1978-September 1979

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1980-02-01

QUICKSILVER was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1978 to September 30, 1979. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection instruments surveyed reentry routes into ground zeroes before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific optional procedures are defined

Operation CRESSET: onsite radiological safety report, October 1977--September 1978

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1979-06-01

CRESSET was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1977 to September 30, 1978. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection instruments surveyed reentry routes into ground zeroes before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

Operation FULCRUM: onsite radiological safety report, October 1976--September 1977

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1978-03-01

FULCRUM was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1976 to September 30, 1977. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection instruments surveyed reentry routes into ground zeroes before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

Operation GUARDIAN onsite radiological safety report, October 1980-September 1981

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1983-02-01

GUARDIAN was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1980 to September 30, 1981. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection intruments surveyed reentry routes into ground zeroes before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

A Privacy-by-Design Contextual Suggestion System for Tourism

Directory of Open Access Journals (Sweden)

Pavlos S. Efraimidis

2016-05-01

Full Text Available We focus on personal data generated by the sensors and through the everyday usage of smart devices and take advantage of these data to build a non-invasive contextual suggestion system for tourism. The system, which we call Pythia, exploits the computational capabilities of modern smart devices to offer high quality personalized POI (point of interest recommendations. To protect user privacy, we apply a privacy by design approach within all of the steps of creating Pythia. The outcome is a system that comprises important architectural and operational innovations. The system is designed to process sensitive personal data, such as location traces, browsing history and web searches (query logs, to automatically infer user preferences and build corresponding POI-based user profiles. These profiles are then used by a contextual suggestion engine to anticipate user choices and make POI recommendations for tourists. Privacy leaks are minimized by implementing an important part of the system functionality at the user side, either as a mobile app or as a client-side web application, and by taking additional precautions, like data generalization, wherever necessary. As a proof of concept, we present a prototype that implements the aforementioned mechanisms on the Android platform accompanied with certain web applications. Even though the current prototype focuses only on location data, the results from the evaluation of the contextual suggestion algorithms and the user experience feedback from volunteers who used the prototype are very positive.

Expectations of the Swiss safety authorities

International Nuclear Information System (INIS)

Naegelin, R.

1994-01-01

On the one hand, nuclear energy can contribute significantly to our energy supply without much environmental consequences. On the other hand, there is a potential for large environmental consequences. The nuclear power plants are vastly different from conventional industrial activities where much has been learned through trial and error processes leading to slow improvements in their safety performance. Hence one cannot afford to learn from mistakes as an approach to safety improvement. It is more important to think ahead and precautions must be taken through proper design and operation before accidents can occur. The precondition for such an approach is what one now refers to as 'safety culture'. This requires a prerequisite frame of mind to 'desire' safety. In addition, the necessary technical 'ability' is also required, without which any culture cannot be realized. Culture is a human reaction to its environment so that it can live in harmony with the real or imaginary world. In the course of human history, different cultures, e.g. hunters and farmers, have evolved to adopt with the prevailing habitats. The term culture is also associated with a humane form of pre-industrial and industrial society. These cultures were, at least partially, the result of pressure to perform suitable actions. However, in the present modern times, things function quite well with less apparent pressure. Thereby positive values in the working culture become questionable. The traits that are endangered include thoroughness, carefulness and sense of duty in ones daily work habits. Also the removal of work from its central position in human life is involved, threatening care by pressure or time and costs. (author)

[The safety data sheets of the paint and coatings sector: analysis of the items of most interest to health and safety in the workplace].

Science.gov (United States)

Boniardi, Luca; Canti, Zulejka; Cantoni, Susanna; Fustinoni, Silvia

2014-07-15

The interlinked REACH-CLP regulations promote the sharing of knowledge regarding the risks and hazards of chemicals throughout the supply chain. The safety data sheet (SDS) is the main instrument to achieve this goal. to study 100 SDS of paints and coatings sector in order to highlight major criticisms related to health and safety of workers. Using the criteria prescribed by Regulation 453/2010/EC and preparing a suitable check list, some items of the sections 1 "Identification of the substance/mixture and of the company", 2 "Hazards identification", 3 "Composition/information on ingredients", the first part of section 7 "Precautions for safe handling", sections 8 "Exposure controls/personal protection" and 16 "Other information", were therefore evaluated for their appropriateness. Seven SDS were written in a foreign language and were excluded from further analysis. Of the remaining 93 SDS, only 23% had a proportion of adequate items greater than 80%, 49 % had adequate items between 60 and 80%, and 28% had less than 60% adequate items. The most critical sections were those relating to workers' safe handling and exposure controls and protection. In conclusion, from the analysis of SDS we found high percentages of inadequacy, especially in sections 7 and 8, the most relevant for the protection of the health and safety of workers.

Awareness of Occupational Injuries and Utilization of Safety Measures among Welders in Coastal South India

Directory of Open Access Journals (Sweden)

S Ganesh Kumar

2013-10-01

Full Text Available Background: Awareness of occupational hazards and its safety precautions among welders is an important health issue, especially in developing countries. Objective: To assess the awareness of occupational hazards and utilization of safety measures among welders in coastal South India. Methods: A cross-sectional study was conducted among 209 welders in Puducherry, South India. Baseline characteristics, awareness of health hazards, safety measures and their availability to and utilization by the participants were assessed using a pre-tested structured questionnaire. Results: The majority of studied welders aged between 20 and 40 years (n=160, 76.6% and had 1-10 years of education (n=181, 86.6%. They were more aware of hazards (n=174, 83.3% than safety measures (n=134, 64.1%. The majority of studied welders utilized at least one protective measure in the preceding week (n=200, 95.7%. Many of them had more than 5 years of experience (n=175, 83.7%, however, only 20% of them had institutional training (n=40, 19.1%. Age group, education level, and utilization of safety measures were significantly associated with awareness of hazards in univariate analysis (p<0.05. Conclusion: Awareness of occupational hazards and utilization of safety measures is low among welders in coastal South India, which highlights the importance of strengthening safety regulatory services towards this group of workers.

Safety concept of high-temperature reactors based on the experience with AVR and THTR

International Nuclear Information System (INIS)

Wachholz, Winfried; Kroeger, Wolfgang

1990-01-01

In the Federal Republic of Germany a reactor is considered safe if verification has been furnished that the requirements contained in paragraph 7 of the Federal German Atomic Energy Act are met for this reactor: demonstration of sufficient precautions against damage required according to the actual state of the art, and especially compliance with the dose rate limits for normal operation and accidental conditions. These requirements result in a deterministic multi-stage safety concept with specified requirements for the engineered safety systems. In recent years, proposals for enhanced safety of nuclear power reactors or a radical change in safety philosophy have been made. This is characterised by 'inherently safe', 'super safe' and similar slogans. A quantitative definition of these requirements has not yet been established, but it is clear as a common objective that the event of beyond design basis accidents evacuation, relocation, and large scale contamination of ground should not occur. As a consequence of the Chernobyl accident the safety of all the NPPs in Germany has been reviewed. This analysis was completed for the THTR reactor in 1988. The same has been done for AVR reactor. The final evaluation of the HTR specific safety features have been fully confirmed. The HTR concepts under development are based on this experience. The HTR-Modul unit is currently being designed

Site Safety Plan for Lawrence Livermore National Laboratory CERCLA investigations

Energy Technology Data Exchange (ETDEWEB)

Bainer, R.; Duarte, J.

1993-07-01

The safety policy of LLNL is to take every reasonable precaution in the performance of work to protect the environment and the health and safety of employees and the public, and to prevent property damage. With respect to hazardous agents, this protection is provided by limiting human exposures, releases to the environment, and contamination of property to levels that are as low as reasonably achievable (ALARA). It is the intent of this Plan to supply the broad outline for completing environmental investigations within ALARA guidelines. It may not be possible to determine actual working conditions in advance of the work; therefore, planning must allow the opportunity to provide a range of protection based upon actual working conditions. Requirements will be the least restrictive possible for a given set of circumstances, such that work can be completed in an efficient and timely fashion. Due to the relatively large size of the LLNL Site and the different types of activities underway, site-specific Operational Safety Procedures (OSPs) will be prepared to supplement activities not covered by this Plan. These site-specific OSPs provide the detailed information for each specific activity and act as an addendum to this Plan, which provides the general plan for LLNL Main Site operation.

[The road to patient safety: facts and desire].

Science.gov (United States)

Aibar-Remón, Carlos; Barrasa-Villar, Ignacio; Moliner-Lahoz, Javier; Gutiérrez-Cía, Isabel; Aibar-Villán, Laura; Obón-Azuara, Blanca; Mareca-Doñate, Rosa; Ríos-Faure, David

2018-01-27

To evaluate differences between the need and degree of implementation of safe practices recommended for patient safety and to check the usefulness of traffic sign iconicity to promote their implementation. The study was developed in two stages: 1) review of safe practices recommended by different organizations and 2) a survey to assess the perceptions for the need and implementation of them and the usefulness of signs to improve their implementation. The sample consisted of professionals from Spain and Latin America working in healthcare settings and in the academic field related to patient safety. 365 questionnaires were collected. All safe practices included were considered necessary (mean and lower limit of confidence interval over 3 out of 5 points). However, in six of the patient safety practices evaluated the implementation was considered insufficient: illegible handwriting, medication reconciliation, standardization of communication systems, early warning systems, procedures performed or equipment used only by trained people, and compliance with patient preferences at the end of life. Improve compliance of with hand hygiene and barrier precautions to prevent infections, ensure the correct identification of patients and the use of checklists are the four practices in which more than 75% of respondents found a high degree of consensus on the usefulness of traffic sings to broaden their use. The differences between perceived need and actual implementation in some safe practices indicate areas for improvement in patient safety. With this aim, the common language and the iconicity of traffic signs could constitute a simple instrument to improve compliance with safe practices for patient safety. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Cerebrospinal fluid protein and glucose examinations and tuberculosis:
Will laboratory safety regulations force a change of practice?

Science.gov (United States)

Tormey, William P; O'Hagan, Christopher

2015-01-01

Cerebrospinal fluid (CSF) protein and glucose examinations are usually performed in chemical pathology departments on autoanalysers. Tuberculosis (TB) is a group 3 biological agent under Directive 2000/54/EC of the European Parliament but in the biochemistry laboratory, no extra precautions are taken in its analysis in possible TB cases. The issue of laboratory practice and safety in the biochemical analyses of CSF specimens, when tuberculosis infection is in question is addressed in the context of ambiguity in the implementation of current national and international health and safety regulations. Additional protective measures for laboratory staff during the analysis of CSF TB samples should force a change in current laboratory practice and become a regulatory issue under ISO 15189. Annual Mantoux skin test or an interferon-γ release assay for TB should be mandatory for relevant staff. This manuscript addresses the issue of biochemistry laboratory practice and safety in the biochemical analyses of CSF specimens when tuberculosis infection is in question in the context of the ambiguity of statutory health and safety regulations.

Young people and snowmobiling in northern Norway: accidents, injury prevention and safety strategies.

Science.gov (United States)

Mehus, Grete; Mehus, Alf Gunnar; Germeten, Sidsel; Henriksen, Nils

2016-01-01

Snowmobiling among young people in Scandinavia frequently leads to accidents and injuries. Systematic studies of accidents exist, but few studies have addressed young drivers' experiences. The aim of this article is to reveal how young people experience and interpret accidents, and to outline a prevention strategy. Thirty-one girls and 50 boys aged 16-23 years from secondary schools in Northern Norway and on Svalbard, a Norwegian archipelago in the Arctic Ocean, participated in 17 focus groups segregated by gender. A content analysis identified themes addressing the research questions. Participants described risk as being inherent to snowmobiling, and claimed that accidents followed from poor risk assessment, careless driving or mishaps. Evaluation of accidents and recommendations for preventive measures varied. Girls acknowledged the risks and wanted knowledge about outdoor life, navigation and external risks. Boys underestimated or downplayed the risks, and wanted knowledge about safety precautions while freeriding. Both genders were aware of how and why accidents occurred, and took precautions. Boys tended to challenge norms in ways that contradict the promotion of safe driving behaviour. Stories of internal justice regarding driving under the influence of alcohol occurred. Adolescents are aware of how accidents occur and how to avoid them. Injury prevention strategies should include a general population strategy and a high-risk strategy targeted at extreme risk-seekers. Drivers, snowmobilers' organisations and the community should share local knowledge in an effort to define problem areas, set priorities and develop and implement preventive measures. Risk prevention should include preparation of safe tracks and focus on safety equipment and safe driving behaviour, but should also pay increased attention to the potential of strengthening normative regulation within peer groups regarding driving behaviour and mutual responsibility for preventing accidents.

A survey of costs incurred in U.K. X-ray diffraction research laboratories as a consequence of proposed regulations for radiological safety

International Nuclear Information System (INIS)

Blow, D.M.

1981-01-01

A small survey of British X-ray diffraction laboratories was undertaken, with the aim of discovering the effects of the Health and Safety at Work Act (1974) and the draft regulations on radiological protection and ionising radiations (1978) on the practice of X-ray crystallography. The responses lead to the conclusion that the average cost incurred in bringing X-ray diffraction equipment to a safety standard compatible with the draft regulations (as judged by the respondents) will exceed Pound2,000 per X-ray generator. The safety costs will represent an overhead charge of at least 15-18% on the purchase of an X-ray generator, requiring additional capital outlay of over Pound5m to maintain the current level of X-ray diffraction activity in the U.K. There seems to be no evidence of a high accident rate with diffraction equipment, and the cost of the safety precautions bears no relation to the risks involved. (author)

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 2. General Practices.

Science.gov (United States)

Mazur, Steven; Holbrook, Michael R; Burdette, Tracey; Joselyn, Nicole; Barr, Jason; Pusl, Daniela; Bollinger, Laura; Coe, Linda; Jahrling, Peter B; Lackemeyer, Matthew G; Wada, Jiro; Kuhn, Jens H; Janosko, Krisztina

2016-10-03

Work in a biosafety level 4 (BSL-4) containment laboratory requires time and great attention to detail. The same work that is done in a BSL-2 laboratory with non-high-consequence pathogens will take significantly longer in a BSL-4 setting. This increased time requirement is due to a multitude of factors that are aimed at protecting the researcher from laboratory-acquired infections, the work environment from potential contamination and the local community from possible release of high-consequence pathogens. Inside the laboratory, movement is restricted due to air hoses attached to the mandatory full-body safety suits. In addition, disinfection of every item that is removed from Class II biosafety cabinets (BSCs) is required. Laboratory specialists must be trained in the practices of the BSL-4 laboratory and must show high proficiency in the skills they are performing. The focus of this article is to outline proper procedures and techniques to ensure laboratory biosafety and experimental accuracy using a standard viral plaque assay as an example procedure. In particular, proper techniques to work safely in a BSL-4 environment when performing an experiment will be visually emphasized. These techniques include: setting up a Class II BSC for experiments, proper cleaning of the Class II BSC when finished working, waste management and safe disposal of waste generated inside a BSL-4 laboratory, and the removal of inactivated samples from inside a BSL-4 laboratory to the BSL-2 laboratory.

Gas and electric power 2003. Evolution of the energy panorama in Europe: evaluation, forecasting and precautions

International Nuclear Information System (INIS)

Boigegrain, R.; Tran Thiet, J.P.; Givry, L.; Lapierre, A.; Vivies, P. de; Brelle, B.; Vedrenne, Ph.; Didier, E.; Munch, P.; Rodrigues, St.; Lermusieau, Ph.; Macchiati, A.; Lamboley, Ph.; Bouchard, G.; Canetti, J.; Bresson, Th. de; Chevalier, J.M.; Saint Andre, B.; Werquin, A.; Mouton, F.R.; Boulanger, Ph.; Vivies, P. de; Terzian, P.

2003-11-01

This 12. international congress on gas and electricity covers the following topics: 1 - change in the energy panorama in Europe: statement, forecasting and precautions: fusions, acquisitions, partnerships and their consequences; evolution of the regulation: actors, decisions and time delays (regulation of electricity and gas in Europe - convergencies and divergences; specificities of the French gas and electricity markets and their perspectives of evolution; focus on the 2003 highlights: the January 3, 2003 law, about 20 new decrees and the 2. gas directive); market regulation: new missions, powers and limitations of the different actors (mission, power and place of regulation authorities today and their possible evolution, status competences extension towards gas; consequences of the introduction of the adjustment mechanism, new stakes of power transportation networks; stakes for gas transport and storage in France and in Europe); spot markets and suitable solutions for industrialists (short-term management of risks; juridical and legal precautions to take before starting a power trade activity; short- and medium-term risk management possibilities; 2 - markets opening and new strategies of energy purchase and selling: strategies of foreign actors in France and opportunities for French actors abroad (market opening and its stakes, specificities and opportunities of the energy market in Italy; challenges and opportunities of gas markets opening in Europe: the Ruhrgas approach; stakes of the French market opening: experience feedback of Endesa Europe); repositioning of activities (the new position of Gaz de France (GdF); the deregulated market: risks and opportunities); changing of supplier or partnerships power (towards commercial repositioning); round table: regulators, suppliers, purchasers: are you ready? The congress ends with a practical training course emceed by Endesa: the French electricity and gas markets in the European context; the management of the

Neglecting safety precautions may lead to trenching fatalities.

Science.gov (United States)

Deatherage, J Harold; Furches, Lisa K; Radcliffe, Mike; Schriver, William R; Wagner, John P

2004-06-01

Trench collapses ranked as the seventh leading cause of the possible twenty-nine causes of OSHA-inspected fatal construction events during the period 1991-2001. This study aims to examine why these fatalities occurred. Forty-four case files from OSHA inspections of fatal trench collapses were reviewed. Improper protection of the excavation site where work was taking place was the leading fatality cause. Several organizational or physical conditions were present at many fatal sites; the most frequent was that no training had been provided for trenching. Presence of a competent, diligent person at the site would have prohibited most fatalities. The top cited violation was lack of protection, that is, benching, shoring, sloping, trench boxes, etc. (29 CFR 1926.652 (a) (1)). Copyright 2004 Wiley-Liss, Inc.

Methodology for safety and security of radioactive sources and materials. The Israeli approach

International Nuclear Information System (INIS)

Keren, M.

1998-01-01

About 10 Radioactive incidents occurred in Israel during 1996-1997. Some of them were theft or lost of Radioactive equipment or sources, some happened because misuse of Radioactive equipment and some of other reasons. Part of them could be eliminated if a better methodological attitude to the subject existed. A new methodology for notification, registration and licensing is described. Hopefully this methodology will increase defense in depth and the Safety and Security of Radioactive sources and materials. Information on the inventory of Radioactive sources and materials is essential. Where they are situated, what is the supply rate or all history from berth to grave. Persons involved are important: Who are the Radiation Safety Officers (RSO), what is their training and updating programs. As much as possible information on the site and places where those Radioactive sources and materials are used. Procedures for security of sources and materials is part of site information, beside safety precautions. Users are obliged to inform on any changes and to ask for confirmation to those changes. The same is when high activity sources are moved across the country. (author)

Precautions to be taken by radiologists and radiographers when prescribing hyoscine-N-butylbromide

Energy Technology Data Exchange (ETDEWEB)

Dyde, R. [Department of Radiology, Leeds Teaching Hospitals NHS Trust, Leeds (United Kingdom); Chapman, A.H. [Department of Radiology, Leeds Teaching Hospitals NHS Trust, Leeds (United Kingdom)], E-mail: tony_chapman@ntlworld.com; Gale, R. [Department of Opthalmology, University of Leeds, Leeds (United Kingdom); Mackintosh, A. [Department of Cardiology, Leeds Teaching Hospitals NHS Trust, Leeds (United Kingdom); Tolan, D.J.M. [Department of Radiology, Leeds Teaching Hospitals NHS Trust, Leeds (United Kingdom)

2008-07-15

Hyoscine-N-butylbromide (Buscopan, Boehringer Ingelheim) is a widely used antispasmodic in radiological practice. There seems to be no consensus as to best practice within radiology regarding the precautions that need to be taken when prescribing Buscopan. We have performed a thorough review of the available literature and make the following recommendations to those administering Buscopan: (1) enquire whether there is an allergic history; (2) ensure patient literature warns that 'in the rare event that following the examination you develop painful, blurred vision in one or both eyes, you must attend hospital immediately for assessment'; (3) warn patients to expect blurred vision and not to drive until this has worn off; (4) remind clinicians that special consideration needs to be given as to the method of investigating patients with cardiac instability, such as those recently admitted with acute coronary syndrome, recurrent cardiac pain at rest, uncontrolled left ventricular failure and recent ventricular arrhythmias.

Precautions to be taken by radiologists and radiographers when prescribing hyoscine-N-butylbromide

International Nuclear Information System (INIS)

Dyde, R.; Chapman, A.H.; Gale, R.; Mackintosh, A.; Tolan, D.J.M.

2008-01-01

Hyoscine-N-butylbromide (Buscopan, Boehringer Ingelheim) is a widely used antispasmodic in radiological practice. There seems to be no consensus as to best practice within radiology regarding the precautions that need to be taken when prescribing Buscopan. We have performed a thorough review of the available literature and make the following recommendations to those administering Buscopan: (1) enquire whether there is an allergic history; (2) ensure patient literature warns that 'in the rare event that following the examination you develop painful, blurred vision in one or both eyes, you must attend hospital immediately for assessment'; (3) warn patients to expect blurred vision and not to drive until this has worn off; (4) remind clinicians that special consideration needs to be given as to the method of investigating patients with cardiac instability, such as those recently admitted with acute coronary syndrome, recurrent cardiac pain at rest, uncontrolled left ventricular failure and recent ventricular arrhythmias

Safety, safety case and society - Lessons from the experience of the Forum on Stakeholder Confidence and other NEA initiatives

International Nuclear Information System (INIS)

Pescatore, Claudio

2014-01-01

A vast amount of literature on radioactive waste management (RWM) and its governance is available on the web page of the Radioactive Waste Management Committee of the OECD Nuclear Energy Agency (NEA), in particular on the pages of the Forum on Stakeholder Confidence (FSC), the Reversibility and Retrievability (R and R) Project and the Project on Records, Knowledge and Memory (RK and M) Preservation across Generations. The FSC literature alone likely represents the largest collection of literature on RWM governance presently available on any single site. The safety case developed for any deep geological repository project deals with technical safety. A license is to be granted based on the repository being, after closure, safe 'by itself', i.e. without the need to watch it, independent of the existence of the implementer, regulator and others. The main legal requirement of the safety case is that it needs to show convincingly that the technical regulatory criteria are met. The latter are both qualitative and quantitative. Qualitative criteria are technical, but not in a strong sense, e.g. one requirement may simply be the use of 'sound technical and managerial principles'. The safety case also needs to argue robustness upon human intrusion. The human intrusion analyses, however, are only used to make a qualitative judgement on the robustness of the system. The international guidance suggests that their results need not be tested, by the authorities, for compliance against a numerical yardstick. The technical regulator will have an important role in decision making, but others aside from the technical regulator will also play a decision-making role in the development of a repository project and with regard to its safety. For instance, the technical regulator is largely removed from the initial choice of site. Safety nowadays is brought about by a system of actors comprising the implementer, technical regulators, specialist groups in various advisory roles and the

Special Radiation Protection Precautions in Therapeutic Nuclear Medicine

Science.gov (United States)

Stefanoyiannis, A. P.; Gerogiannis, J.

2010-01-01

Therapeutic Nuclear Medicine concerns the administration of appropriate amounts of radioactivity of certain isotopes, in order to achieve internal localized irradiation of neoplasmatic cells. Due to the increased level and the specific isotope characteristics of administered radioactivity, special Radiation Protection precautions must be taken. This study addresses such issues, based on national as well as international legislation and guidelines. Application of the principle of optimization is of outmost importance and is based on individual dose planning. The decision about the release of Nuclear Medicine patients after therapy is determined on an individual basis, taking into account patients' pattern of contact with other people, their age and that of persons in the home environment, in addition to other factors. Estimation of the absorbed dose given to the treated organ is based on uptake measurements and other biokinetic data, as well as on the mass of the treated tissue or organ. Concerning pregnant women, the rule of thumb is that they should not be treated, unless the radionuclide therapy is required to save their lives. In that case, the potential absorbed dose and risk to the foetus should be estimated and conveyed to the patient. After radionuclide therapy, a female should be advised to avoid pregnancy for the period of time depending on the specific radionuclide. This is to ensure that the dose to a conceptus/foetus would probably not exceed 1 mGy (the member of the public dose limit). The radiation risk for relatives and caregivers is small and unlikely to exceed the legal dose constraints during the period of the patient's treatment. Solid waste from the patient's stay in hospital is a different matter, and is normally incinerated or held for a period until radioactive decay brings the activity to an acceptable level.

Radiation safety of gamma and electron irradiation facilities

International Nuclear Information System (INIS)

1992-01-01

There are currently some 160 gamma irradiation facilities and over 600 electron beam facilities in operation throughout virtually all Member States of the IAEA. The most widespread uses of these facilities are for the sterilization of medical and pharmaceutical products, the preservation of foodstuffs, polymer synthesis and modification, and the eradication of insect infestation. The safety record of this industry has been very good. Nevertheless, there is a potential for accidents with serious consequences. Gamma and electron beam facilities produce very high dose rates during irradiation, so that a person accidentally present in the irradiation chamber can receive a lethal dose within minutes or seconds. Precautions against uncontrolled entry must therefore be taken. Furthermore, gamma irradiation facilities contain large amounts of radioactivity and if the mechanism for retracting the source is damaged, the source may remain exposed, inhibiting direct access to carry out remedial work. Contamination can result from corroded or damaged sources, and decontamination can be very expensive. These aspects clearly indicate the need to achieve a high degree of safety and reliability in the facilities. This can be accomplished by effective quality control together with careful design, manufacture, installation, operation and decommissioning. The guidance in this Safety Series publication is intended for competent authorities responsible for regulating the use of radiation sources as well as the manufacturers, suppliers, installers and users of gamma and electron beam facilities. 20 refs, 6 figs

Safety analysis report. Decontamination and decommissioning of the EBR-I Complex

International Nuclear Information System (INIS)

Commander, J.C.; Macbeth, P.J.; Michels, D.E.

1975-06-01

The safety aspects of the planned EBR-I Complex decontamination and decommissioning operations are assessed. The major operations are: (1) removal of NaK from the EBR-I primary and secondary coolant systems, (2) processing of the NaK to produce solid caustic for disposal, (3) decontamination of contaminated areas of EBR-I and ZPR-III, (4) removal of items that cannot be decontaminated economically to acceptably safe levels, (5) isolation of contaminated areas, (6) demolition of the AFSR Shielding, and (7) removal of contaminated vessels from the NaK storage pit. It may be concluded that although potential hazards do exist from explosion, chemical burns and low-level radioactive exposure from the D and D operation, these hazards represent acceptable risks provided that the established procedures and precautions are followed. (U.S.)

Suggestions for an improved HRA method for use in Probabilistic Safety Assessment

International Nuclear Information System (INIS)

Parry, Gareth W.

1995-01-01

This paper discusses why an improved Human Reliability Analysis (HRA) approach for use in Probabilistic Safety Assessments (PSAs) is needed, and proposes a set of requirements on the improved HRA method. The constraints imposed by the need to embed the approach into the PSA methodology are discussed. One approach to laying the foundation for an improved method, using models from the cognitive psychology and behavioral science disciplines, is outlined

Sociology, systems and (patient) safety: knowledge translations in healthcare policy.

Science.gov (United States)

Jensen, Casper Bruun

2008-03-01

In 2000 the American Institute of Medicine, adviser to the federal government on policy matters relating to the health of the public, published the report To Err is Human: Building a Safer Health System, which was to become a call to arms for improving patient safety across the Western world. By re-conceiving healthcare as a system, it was argued that it was possible to transform the current culture of blame, which made individuals take defensive precautions against being assigned responsibility for error - notably by not reporting adverse events, into a culture of safety. The IOM report draws on several prominent social scientists in accomplishing this re-conceptualisation. But the analyses of these authors are not immediately relevant for health policy. It requires knowledge translation to make them so. This paper analyses the process of translation. The discussion is especially pertinent due to a certain looping effect between social science research and policy concerns. The case here presented is thus doubly illustrative: exemplifying first how social science is translated into health policy and secondly how the transformation required for this to function is taken as an analytical improvement that can in turn be redeployed in social research.

Recommendations and Suggestions of the IRRS Mission in Croatia

International Nuclear Information System (INIS)

Novosel, N.

2016-01-01

According to the Act on Radiological and Nuclear Safety, Director General of the State Office for Radiological and Nuclear Safety (SORNS) is obliged to conduct self-assessment of the national legislative framework and of the competent authorities and to provide for international audit of important segments of the national legislative framework and competent authorities with the purpose of continuous improvement of radiological and nuclear safety. SORNS as a state administration body competent for activities pertaining to radiological and nuclear safety, submitted in April 2013 the request to the International Atomic Energy Agency (IAEA) to conduct an Integrated Regulatory Review Service (IRRS) mission. SORNS conducted a self-assessment in preparation for the mission and prepared a preliminary action plan. The results of SORNS self-assessment and supporting documentation were provided to the IRRS review team as advance reference material for the mission. IRRS mission took place in Zagreb from 7 to 17 Jun 2015. The IRRS team carried out the review in the following areas: responsibilities and functions of the government; the global nuclear safety regime; responsibilities and functions of the regulatory body; the management system of the regulatory body; the activities of the regulatory body including authorization, review and assessment, inspection and enforcement processes; development and content of regulations and guides; emergency preparedness and response; occupational radiation protection, patient protection, public and environmental exposure control, waste management and decommissioning. The IRRS team identified a number of recommendations and suggestions where improvements in the area of radiological and nuclear safety are necessary or desirable. Those recommendations and suggestions were translated and approved by the Government in the form of the Governmental conclusion. This conclusion presents the action plan for the SORNS and other governmental bodies and

Designing and Developing an Effective Safety Program for a Student Project Team

Directory of Open Access Journals (Sweden)

John Catton

2018-05-01

Full Text Available In the workplace, safety must be the first priority of all employers and employees alike. In order to maintain the safety and well-being of their employees, employers must demonstrate due diligence and provide the appropriate safety training to familiarize employees with the hazards within the workplace. Although, a student “project team” is not a business, the work done by students for their respective teams is synonymous with the work done in a place of business and thus requires that similar safety precautions and training be administered to students by their team leads and faculty advisors. They take on the role of supervisors within the team dynamic. Student teams often utilize the guidelines and policies that their universities or colleges have developed in order to build a set of standard operating procedures and safety training modules. These guidelines aid in providing a base for training for the team, however, they are no substitute for training specific to the safety risks associated with the work the team is doing. In order to comply with these requirements, a full analysis of the workplace is required to be completed. A variety of safety analysis techniques need to be applied to define the hazards within the workplace and institute appropriate measures to mitigate them. In this work, a process is developed for establishing a safety training program for a student project team, utilizing systems safety management techniques and the aspect of gamification to produce incentives for students to continue developing their skills. Although, systems safety management is typically applied to the design of active safety components or systems, the techniques for identifying and mitigating hazards can be applied in the same fashion to the workplace. They allow one to analyze their workplace and determine the hazards their employees might encounter, assign appropriate hazard ratings and segregate each respective hazard by their risks. In so

Survey of potential health and safety hazards of commercial-scale ethanol production facilities

Energy Technology Data Exchange (ETDEWEB)

Watson, A.P.; Smith, J.G.; Elmore, J.L.

1982-04-01

Generic safety and health aspects of commercial-scale (60 to 600 million L/y) anhydrous ethanol production were identified. Several common feedstocks (grains, roots and fibers, and sugarcane) and fuels (coal, natural gas, wood, and bagasse) were evaluated throughout each step of generic plant operation, from initial milling and sizing through saccharification, fermentation, distillation, and stillage disposal. The fermentation, digestion, or combustion phases are not particularly hazardous, although the strong acids and bases used for hydrolysis and pH adjustment should be handled with the same precautions that every industrial solvent deserves. The most serious safety hazard is that of explosion from grain dust or ethanol fume ignition and boiler/steam line overpressurization. Inhalation of ethanol and carbon dioxide vapors may cause intoxication or asphyxiation in unventilated areas, which could be particularly hazardous near equipment controls and agitating vats. Contact with low-pressure process steam would produce scalding burns. Benzene, used in stripping water from ethanol in the final distillation column, is a suspected leukemogen. Substitution of this fluid by alternative liquids is addressed.

Safety and Environment aspects of Tokamak- type Fusion Power Reactor- An Overview

Science.gov (United States)

Doshi, Bharat; Reddy, D. Chenna

2017-04-01

Naturally occurring thermonuclear fusion reaction (of light atoms to form a heavier nucleus) in the sun and every star in the universe, releases incredible amounts of energy. Demonstrating the controlled and sustained reaction of deuterium-tritium plasma should enable the development of fusion as an energy source here on Earth. The promising fusion power reactors could be operated on the deuterium-tritium fuel cycle with fuel self-sufficiency. The potential impact of fusion power on the environment and the possible risks associated with operating large-scale fusion power plants is being studied by different countries. The results show that fusion can be a very safe and sustainable energy source. A fusion power plant possesses not only intrinsic advantages with respect to safety compared to other sources of energy, but also a negligible long term impact on the environment provided certain precautions are taken in its design. One of the important considerations is in the selection of low activation structural materials for reactor vessel. Selection of the materials for first wall and breeding blanket components is also important from safety issues. It is possible to fully benefit from the advantages of fusion energy if safety and environmental concerns are taken into account when considering the conceptual studies of a reactor design. The significant safety hazards are due to the tritium inventory and energetic neutron fluence induced activity in the reactor vessel, first wall components, blanket system etc. The potential of release of radioactivity under operational and accident conditions needs attention while designing the fusion reactor. Appropriate safety analysis for the quantification of the risk shall be done following different methods such as FFMEA (Functional Failure Modes and Effects Analysis) and HAZOP (Hazards and operability). Level of safety and safety classification such as nuclear safety and non-nuclear safety is very important for the FPR (Fusion

Risk, Uncertainty and Precaution in Science: The Threshold of the Toxicological Concern Approach in Food Toxicology.

Science.gov (United States)

Bschir, Karim

2017-04-01

Environmental risk assessment is often affected by severe uncertainty. The frequently invoked precautionary principle helps to guide risk assessment and decision-making in the face of scientific uncertainty. In many contexts, however, uncertainties play a role not only in the application of scientific models but also in their development. Building on recent literature in the philosophy of science, this paper argues that precaution should be exercised at the stage when tools for risk assessment are developed as well as when they are used to inform decision-making. The relevance and consequences of this claim are discussed in the context of the threshold of the toxicological concern approach in food toxicology. I conclude that the approach does not meet the standards of an epistemic version of the precautionary principle.

Transformation toward a Secure and Precaution-Oriented Energy System with the Guiding Concept of Resilience—Implementation of Low-Exergy Solutions in Northwestern Germany

Directory of Open Access Journals (Sweden)

Urte Brand

2015-07-01

Full Text Available Climate changes, incidents like nuclear disasters, and associated political objectives call for significant changes to the current energy system. Despite these far-reaching transformation processes, within the intended changes security of supply and precautions against the possible consequences of climate change must be ensured. Consequently, the question arises how to direct energy systems. In this context the processes of guiding orientations with the help of the guiding concept of “resilient systems” and feasible and addressee-oriented guiding design principles can be an option to provide guidance in transformation processes. However, it is questionable whether and how such processes are effective in the long term and if they are able to give direction by doing so. Within the framework of empirical studies of a regional guiding orientation process for the energy system of Northwestern Germany, the long-term effectiveness of the process and its spread resilient guiding design principles of “low-exergy solutions” and “climate-adapted and energy-efficient refrigeration” has been confirmed. Such effectiveness requires the implementation of a four-phase guiding orientation process which takes content-related and process-related effectiveness factors into account. Therefore, the study shows how regional energy systems can be designed toward the major challenges of ensuring security and precaution.

30 CFR 56.4130 - Electric substations and liquid storage facilities.

Science.gov (United States)

2010-07-01

... LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control Prohibitions/precautions/housekeeping § 56.4130 Electric substations...

30 CFR 57.4130 - Surface electric substations and liquid storage facilities.

Science.gov (United States)

2010-07-01

... LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Prohibitions/precautions/housekeeping § 57.4130 Surface electric...

Large-Scale Spacecraft Fire Safety Tests

Science.gov (United States)

Urban, David; Ruff, Gary A.; Ferkul, Paul V.; Olson, Sandra; Fernandez-Pello, A. Carlos; T'ien, James S.; Torero, Jose L.; Cowlard, Adam J.; Rouvreau, Sebastien; Minster, Olivier;

Influence of shock waves as a result of assumed vessel failure on parts of the plant relevant to safety

International Nuclear Information System (INIS)

Danisch, R.; Graubner, U.

1981-01-01

The shock wave induced rupture is of subordinate importance for the laying out of the parts of the plant relevant to safety. It is covered by the precautions for maximum potential earthquakes, aircraft crashes and chemical explosions. The failure of vessels in the power house (WAZUe, SPWB) as the result of a maximum potential earthquake is extremely improbable. If a combination of the stresses resulting from maximum potential earthquakes with the hypothetical stresses resulting from vessel failure is undertaken, it can be seen that the total stresses are only increased by a minimal amount, due to the quadratic averaging of less than 3%. (orig./DG) [de

The safety and efficacy of contact lens wear in the industrial and chemical workplace.

Science.gov (United States)

Tyhurst, Keith; McNett, Ryan; Bennett, Edward

2007-11-01

The use and safety of contact lenses in the industrial and chemical workplace has often been questioned since the 1960s because of many unconfirmed reports of ocular injury resulting from contact lens wear. Because of these urban legends, contact lens wear has been banned or wearers have been required to wear additional personal protective equipment (PPE) not required of non-contact lens wearers. Literature review via Medline and Google search. Research has shown that contact lenses typically provide protective benefits that decrease the severity of ocular injury and improve worker performance. While contact lens wear contraindications do exist, in most cases, and with proper precautions, contact lens wear is still possible. Industrial and chemical companies need to establish written contact lens use policies based on current studies that have shown the safety of workplace contact lens wear when combined with the same PPE required of non-contact lens wearers. Practitioners need to discuss, with their contact lens patients, the additional responsibilities required to maintain proper lens hygiene and proper PPE in the workplace.

Nuclear power plant safety, the merits of separation

International Nuclear Information System (INIS)

Helander, L.I.; Tiren, L.I.

1977-01-01

The United States AEC General Design Criteria for Nuclear Power Plants are used worldwide as a basis for the assessment of nuclear plant safety. Several of these criteria require redundancy of safety systems, separation of protection and control systems, consideration of natural phenomena, etc. All these criteria point in one particular direction: the necessity for physically separating the various safety-related systems of a nuclear power plant, particularly with regard to single occurrences that may yield a multiple failure. Requirements in this regard have been amplified by the United States NRC Regulatory Guides and by IEEE Standards. The single occurrence that yields a multiple failure may be, for example, fire, pipe whip, missiles, flooding, hurricanes, or lightning. The paper discusses protection, against the quoted events and others, obtained through applying criteria regarding redundancy and separation of safety-related structures, systems and components. Such criteria affect nuclear plant design in many areas, such as building lay-out, arrangements for fire protection and ventilation, separation of mechanical systems and components, in particular emergency cooling systems, and separation of electric equipment and cables. Implementation of the ensuing design criteria for a BWR power plant is described. This design involves the separation of Emergency Cooling Systems into four 50% Capacity Systems which are independent and separated, including the distribution network for electric power from on-site standby diesel generators and the circuitry for the reactor protection system. The plant is subdivided into a number of fire zones each with its own independent ventilation system. The fire zones are further subdivided into a multitude of fire cells such that redundant subsystems are housed in separate cells. These design precautions with regard to fire are complemented by extensive fire fighting systems

[Relationship between perceptions of safety climate at workplace and depressive disorders in manufacturing workers].

Science.gov (United States)

Liu, Xu-hua; Xiao, Ya-ni; Huang, Zhi-xiong; Huang, Shao-bin; Cao, Xiao-ou; Guan, Dong-bo; Chen, Wei-qing

2013-04-01

To investigate the risk factors for depressive disorders in manufacturing workers and to provide a basis for developing health promotion measures at workplace. A questionnaire survey was performed in 8085 front-line production workers from 33 manufacturing enterprises in Nanhai District of Foshan, Guangdong Province, China. The questionnaire contained a survey of demographic characteristics, the Safety Climate Scale, the Center for Epidemiological Studies Depression Scale, etc. The multilevel logistic regression analysis was applied to investigate the risk factors for depressive disorders in workers. A total of 6260 workers completed the survey; their mean age was 31.1 ± 8.6 years, and 53.2% of them were males. The multilevel logistic regression analysis showed that after adjustment for sociodemographic factors such as age, sex, and martial status, more depressive disorders were reported in the enterprises with higher score of "production safety training" than in those with lower score (OR = 1.46, 95%CI = 1.07 ∼ 1.97); fewer depressive disorders were reported in the enterprises with higher score of "colleagues concerned about production safety" than in those with lower score (OR = 0.08, 95%CI = 0.03 ∼ 0.26); the relationships of "safety warnings and precautions" and "managers concerned about production safety" with workers' depressive disorders were not statistically significant (OR = 0.78, 95%CI = 0.48 ∼ 1.28; OR = 1.08, 95%CI = 0.68 ∼ 1.72). Depressive disorders in manufacturing workers are related to the safety climate at workplace, which indicates that a good safety climate at workplace should be created to prevent and control depressive disorders in workers.

Optimizing Quality of Care and Patient Safety in Malaysia: The Current Global Initiatives, Gaps and Suggested Solutions.

Science.gov (United States)

Jarrar, Mu'taman; Abdul Rahman, Hamzah; Don, Mohammad Sobri

2015-10-20

Demand for health care service has significantly increased, while the quality of healthcare and patient safety has become national and international priorities. This paper aims to identify the gaps and the current initiatives for optimizing the quality of care and patient safety in Malaysia. Review of the current literature. Highly cited articles were used as the basis to retrieve and review the current initiatives for optimizing the quality of care and patient safety. The country health plan of Ministry of Health (MOH) Malaysia and the MOH Malaysia Annual Reports were reviewed. The MOH has set four strategies for optimizing quality and sustaining quality of life. The 10th Malaysia Health Plan promotes the theme "1 Care for 1 Malaysia" in order to sustain the quality of care. Despite of these efforts, the total number of complaints received by the medico-legal section of the MOH Malaysia is increasing. The current global initiatives indicted that quality performance generally belong to three main categories: patient; staffing; and working environment related factors. There is no single intervention for optimizing quality of care to maintain patient safety. Multidimensional efforts and interventions are recommended in order to optimize the quality of care and patient safety in Malaysia.

Optimizing Quality of Care and Patient Safety in Malaysia: The Current Global Initiatives, Gaps and Suggested Solutions

Science.gov (United States)

Jarrar, Mu’taman; Rahman, Hamzah Abdul; Don, Mohammad Sobri

2016-01-01

Background and Objective: Demand for health care service has significantly increased, while the quality of healthcare and patient safety has become national and international priorities. This paper aims to identify the gaps and the current initiatives for optimizing the quality of care and patient safety in Malaysia. Design: Review of the current literature. Highly cited articles were used as the basis to retrieve and review the current initiatives for optimizing the quality of care and patient safety. The country health plan of Ministry of Health (MOH) Malaysia and the MOH Malaysia Annual Reports were reviewed. Results: The MOH has set four strategies for optimizing quality and sustaining quality of life. The 10th Malaysia Health Plan promotes the theme “1 Care for 1 Malaysia” in order to sustain the quality of care. Despite of these efforts, the total number of complaints received by the medico-legal section of the MOH Malaysia is increasing. The current global initiatives indicted that quality performance generally belong to three main categories: patient; staffing; and working environment related factors. Conclusions: There is no single intervention for optimizing quality of care to maintain patient safety. Multidimensional efforts and interventions are recommended in order to optimize the quality of care and patient safety in Malaysia. PMID:26755459

Reducing risks and increasing safety in everyday life: the role of the public

International Nuclear Information System (INIS)

Enander, A.

1998-01-01

Full text of publication follows: in social science risk research more attention has been paid to examining how people in general perceive risks than to how they perceive possible measures to reduce risks and to increase their own safety. The latter area is, however, becoming increasingly important to understand, particularly in the light of current emphasis on individual responsibility in risk prevention and emergency preparedness. For example, in Sweden a major effort to increase safety awareness among the general public and to increase knowledge and skills in a number of safety-related areas is at present being planned. This effort is being undertaken as a cooperative effort between different authorities and institutions and is coordinated by the Swedish Rescue Services Agency. The intentions behind this and similar programmes raise a number of questions concerning how people view risks and safety measures in their own immediate environment. Knowledge of the factors affecting willingness to take precautions is important in the design of communication and information. The factors which are of significance may be risk-related and concern perceptions of personal risk, but may also be related to attitudes an beliefs concerning different precautionary measures, to perception of social norms and conventions as well as to personal experiences and values. This paper presents some data concerning views and actions among lay groups in relation to reducing risks and increasing safety. Factors affecting these views are discussed in the light of previous research and of empirical data from some recent studies. (author)

Safety evaluation of cation-exchange resins

International Nuclear Information System (INIS)

Kalkwarf, D.R.

1977-08-01

Results are presented of a study to evaluate whether sufficient information is available to establish conservative limits for the safe use of cation-exchange resins in separating radionuclides and, if not, to recommend what new data should be acquired. The study was also an attempt to identify in-line analytical techniques for the evaluation of resin degradation during radionuclide processing. The report is based upon a review of the published literature and upon discussions with many people engaged in the use of these resins. It was concluded that the chief hazard in the use of cation-exchange resins for separating radionuclides is a thermal explosion if nitric acid or other strong oxidants are present in the process solution. Thermal explosions can be avoided by limiting process parameters so that the rates of heat and gas generation in the system do not exceed the rates for their transfer to the surroundings. Such parameters include temperature, oxidant concentration, the amounts of possible catalysts, the radiation dose absorbed by the resin and the diameter of the resin column. Current information is not sufficient to define safe upper limits for these parameters. They can be evaluated, however, from equations derived from the Frank-Kamenetskii theory of thermal explosions provided the heat capacities, thermal conductivities and rates of heat evolution in the relevant resin-oxidant mixtures are known. It is recommended that such measurements be made and the appropriate limits be evaluated. A list of additional safety precautions are also presented to aid in the application of these limits and to provide additional margins of safety. In-line evaluation of resin degradation to assess its safety hazard is considered impractical. Rather, it is recommended that the resin be removed from use before it has received the limiting radiation dose, evaluated as described above

Safety aspects in decontamination operations: Lessons learned during the decommissioning of a small PWR reactor

International Nuclear Information System (INIS)

Klein, M.; Ponnet, M.; Emond, O.

2002-01-01

Decontamination operations are generally executed during the decommissioning of nuclear installations for different objectives: decontamination of loops or large pieces to reduce the dose rate inside a contaminated plant or decontamination to minimize the amount of radioactive waste. These decontamination operations raise safety issues such as radiological exposure, classical safety, environmental releases, production and management of secondary waste, management of primary resources, etc. This paper presents the return of experience from decontamination operations performed during the dismantling of the BR3 PWR reactor. The safety issues are discussed for 3 types of decontamination operations: full system decontamination of the primary loop with a chemical process to reduce the dose rate by a factor of 10; thorough decontamination with an aggressive chemical process of dismantled pieces to reach the unconditional clearance values; and thorough decontamination processes with physical processes of metals and of concrete to reach the unconditional clearance values. For the protection of the workers, we must consider the ALARA aspects and the classical safety issues. During the progress of our dismantling operations, the dose rate issue was becoming less important but the classical safety issues were becoming preponderant due to the use of very aggressive techniques. For the protection of the environment, we must take all the precautions to avoid any leakages from the plant and we must use processes which minimize the use of toxic products and which minimize the production of secondary wastes. We therefore promote the use of regenerative processes. (author)

A Simple Predictive Method of Critical Flicker Detection for Human Healthy Precaution

Directory of Open Access Journals (Sweden)

Goh Zai Peng

2015-01-01

Full Text Available Interharmonics and flickers have an interrelationship between each other. Based on International Electrotechnical Commission (IEC flicker standard, the critical flicker frequency for a human eye is located at 8.8 Hz. Additionally, eye strains, headaches, and in the worst case seizures may happen due to the critical flicker. Therefore, this paper introduces a worthwhile research gap on the investigation of interrelationship between the amplitudes of the interharmonics and the critical flicker for 50 Hz power system. Consequently, the significant findings obtained in this paper are the amplitudes of two particular interharmonics are able to detect the critical flicker. In this paper, the aforementioned amplitudes are detected by adaptive linear neuron (ADALINE. After that, the critical flicker is detected by substituting the aforesaid amplitudes to the formulas that have been generated in this paper accordingly. Simulation and experimental works are conducted and the accuracy of the proposed algorithm which utilizes ADALINE is similar, as compared to typical Fluke power analyzer. In a nutshell, this simple predictive method for critical flicker detection has strong potential to be applied in any human crowded places (such as offices, shopping complexes, and stadiums for human healthy precaution purpose due to its simplicity.

Evaluation of Four Bedside Test Systems for Card Performance, Handling and Safety.

Science.gov (United States)

Giebel, Felix; Picker, Susanne M; Gathof, Birgit S

2008-01-01

SUMMARY: OBJECTIVE: Pretransfusion ABO compatibility testing is a simple and required precaution against ABO-incompatible transfusion, which is one of the greatest threats in transfusion medicine. While distinct agglutination is most important for correct test interpretation, protection against infectious diseases and ease of handling are crucial for accurate test performance. Therefore, the aim of this study was to evaluate differences in test card design, handling, and user safety. DESIGN: Four different bedside test cards with pre-applied antibodies were evaluated by 100 medical students using packed red blood cells of different ABO blood groups. Criteria of evaluation were: agglutination, labelling, handling, and safety regarding possible user injuries. Criteria were rated subjectively according to German school notes ranging from 1 = very good to 6 = very bad/insufficient. RESULTS: Overall, all cards received very good/good marks. The ABO blood group was identified correctly in all cases. Three cards (no. 1, no. 3, no. 4) received statistically significant (p labelling (1.5 vs. 2.2-2.4), handling (1.9-2.0 vs. 2.5), and user safety (2.5 vs. 3.4). Analysis of card self-explanation revealed no remarkable differences. CONCLUSION: Despite good performance of all card systems tested, the best results when including all criteria evaluated were obtained with card no. 4 (particularly concerning clear agglutination), followed by cards no. 2, no. 1, and no. 3.

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

Energy Technology Data Exchange (ETDEWEB)

Chang, C.K., E-mail: ckchang@kings.ac.kr [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); Lee, K.J., E-mail: klee@khu.ac.kr [Kyung Hee Univ., Seoul (Korea, Republic of)

2014-07-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

International Nuclear Information System (INIS)

Chang, C.K.; Lee, K.J.

2014-01-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

Operation Grenadier. Onsite radiological safety report for announced nuclear tests, October 1984-September 1985

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1986-09-01

Grenadier was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1984 through September 30, 1985. This report includes those experiments publicly announced. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection instruments surveyed reentry routes into ground zeros before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

Operation fusileer onsite radiological safety report for announced nuclear tests, October 1983-September 1984

International Nuclear Information System (INIS)

Mullen, O.W.; Eubank, B.F.

1985-08-01

Fusileer was the name assigned to the series of underground nuclear experiments conducted at the Nevada Test Site from October 1, 1983 through September 30, 1984. This report is limited to announced nuclear tests. Remote radiation measurements were taken during and after each nuclear experiment by a telemetry system. Monitors with portable radiation detection instruments surveyed reentry routes into ground zeros before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

The motivational safety helmet : Redesign suggestions improving the intrinsic motivation of construction site workers

NARCIS (Netherlands)

Beldman, T. (Teunis); Boer, de J. (Johannes); Lemmens, P. (Pim); Stilma, M. (Margot)

2014-01-01

In reaction to the lack of intrinsic motivation of construction site workers, to wear their safety helmets at all times, a series of research projects studied causes and possible solutions. Goal is to gain an inspirational discussion to get the design onto the next level. This paper describes a

Periodical safety review of the Goesgen-Daeniken nuclear power plant. Summary, results and evaluation; Periodische Sicherheitsueberpruefung fuer das Kernkraftwerk Goesgen-Daeniken. Zusammenfassung, Ergebnisse und Bewertung

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-15

The Goesgen nuclear power plant (KKG) received its operational licence on September 9, 1978. The operational start-up of the plant went on into the year 1979, but there was a short interruption because of the accident in the Three Mile Island reactor on March 28, 1979. In May 1985 KKG submitted a request for raising the thermal reactor power from the then 2808 MW to 3002 MW. Based on the examination by the Federal Agency for the Safety of Nuclear Installations (HSK), the Swiss Federal Council granted the licence in two steps: in December 1985 for raising the thermal power to 2900 MW, and, in April 1992, to 3002 MW. The licence for the second step was given under the condition that some more experience was to be gained concerning the fuel rod cladding under higher loading. As part of the yearly re-licensing on restart after fuel assembly reloading, HSK confirmed that the plant status conformed to the legal requirements. In November 1986, HSK asked all Swiss nuclear power plant managers to state their opinions on proposed measures concerning severe accidents. Some of the measures were already in discussion; the Chernobyl accident on April 26, 1986, accelerated their implementation and was also a reason for the introduction of the measures against severe accidents. In this context, KKG carried out a risk study which led to the installation of a filtered pressure release system for the containment. Another consequence of the Chernobyl accident was the introduction of technical Periodical Safety Reviews (PSR) for all operating nuclear power plants. Central points of the PSR are: a) comparison with the continuously improving state-of-the-art of science and technology concerning safety precautions; b) a systematic evaluation of operating experience and plant status; c) the taking into account of probabilistic safety analyses in the overall evaluation of the plant. Within the framework of the examination of the overall plant, HSK also checks how its requirements concerning

Cold, Ice, and Snow Safety (For Parents)

Science.gov (United States)

... to mention a few. Plus, someone has to shovel the snow, right? Once outdoors, however, take precautions ... re going to get the family outside to shovel the snow? Fine, but take care. Snow shoveling ...

Safety procedures for the MFTF sustaining-neutral-beam power supply

International Nuclear Information System (INIS)

Wilson, J.H.

1981-01-01

The MFTF SNBPSS comprises a number of sources of potentially hazardous electrical energy in a small physical area. Power is handled at 80 kV dc, 80 A; 70 V dc, 4000 A; 25 V dc, 5500 A; 3 kV dc, 10 A; and 2 kV dc, 10 A. Power for these systems is furnished from two separate 480 V distribution systems and a 13.8 kV distribution system. A defense in depth approach is used; interlocks are provided in the hardware to make it difficult to gain access to an energized circuit, and the operating procedure includes precautions which would protect personnel even if no interlocks were working. The complexity of the system implies a complex operating procedure, and this potential complexity is controlled by presenting the procedure in a modular form using 37 separate checklists for specific operations. The checklists are presented in flowchart form, so contingencies can be handled at the lowest possible level without compromising safety

Status of nuclear safety developments and prospects for the future

International Nuclear Information System (INIS)

Birkhofer, A.; Laverie, M.

1992-01-01

During the eighties, the emphasis on safety questions progressively shifted from design and construction of plants towards the operation of existing plants. Lessons learned from incidents and accidents in national or foreign plants, experience gained from the operation and maintenance of plants, research and ageing of installations were some of the issues on which, at that time, the nuclear community focused its attention and concern. At the same time, numerous actions, dedicated to the strengthening of defense-in-depth which consists of piling up enough dispositions (or defense lines) to be able to deal with situations even beyond the initial design of plants, were implemented. Despite all these technical precautions to reduce the risk to the public and the environment, the acceptance level decreased in some countries, due to the impact of T.M.T. and Chernobyl, a certain misunderstanding between technicians and the public proceeding from a lack of openness and poor communication

Safety Education and Science.

Science.gov (United States)

Ralph, Richard

1980-01-01

Safety education in the science classroom is discussed, including the beginning of safe management, attitudes toward safety education, laboratory assistants, chemical and health regulation, safety aids, and a case study of a high school science laboratory. Suggestions for safety codes for science teachers, student behavior, and laboratory…

Optimizing Quality of Care and Patient Safety in Malaysia: The Current Global Initiatives, Gaps and Suggested Solutions

OpenAIRE

Jarrar, Mu?taman; Rahman, Hamzah Abdul; Don, Mohammad Sobri

2015-01-01

Background and Objective: Demand for health care service has significantly increased, while the quality of healthcare and patient safety has become national and international priorities. This paper aims to identify the gaps and the current initiatives for optimizing the quality of care and patient safety in Malaysia. Design: Review of the current literature. Highly cited articles were used as the basis to retrieve and review the current initiatives for optimizing the quality of care and patie...

Upholding science in health, safety and environmental risk assessments and regulations

International Nuclear Information System (INIS)

Aschner, Michael; Autrup, Herman N.; Berry, Sir Colin L.; Boobis, Alan R.; Cohen, Samuel M.; Creppy, Edmond E.; Dekant, Wolfgang; Doull, John; Galli, Corrado L.; Goodman, Jay I.; Gori, Gio B.; Greim, Helmut A.; Joudrier, Philippe

2016-01-01

A public appeal has been advanced by a large group of scientists, concerned that science has been misused in attempting to quantify and regulate unmeasurable hazards and risks. The appeal recalls that science is unable to evaluate hazards that cannot be measured, and that science in such cases should not be invoked to justify risk assessments in health, safety and environmental regulations. The appeal also notes that most national and international statutes delineating the discretion of regulators are ambiguous about what rules of evidence ought to apply. Those statutes should be revised to ensure that the evidence for regulatory action is grounded on the standards of the scientific method, whenever feasible. When independent scientific evidence is not possible, policies and regulations should be informed by publicly debated trade-offs between socially desirable uses and social perceptions of affordable precaution. This article explores the premises, implications and actions supporting the appeal and its objectives.

Influence of time to diagnosis of severe influenza on antibiotic use, length of stay, isolation precautions, and mortality: a retrospective study.

Science.gov (United States)

Akers, Isabel E; Weber, Rainer; Sax, Hugo; Böni, Jürg; Trkola, Alexandra; Kuster, Stefan P

2017-07-01

Timely diagnosis of influenza infection in patients might help reduce antibiotic use during influenza seasons and, consequently, antibiotic selection pressure. In this retrospective cohort study, we aimed to evaluate whether time to influenza diagnosis in patients with severe influenza is associated with the duration of antibiotic therapy. We retrospectively included all hospitalized patients >16 years who tested positive for influenza A or B by polymerase chain reaction during influenza seasons 2013/2014 or 2014/2015 at the University Hospital Zurich. The primary aim was to assess the association between timing of laboratory-confirmed influenza diagnosis and duration of antibiotic therapy. Secondary outcomes were length of hospital stay, duration of isolation precautions, and mortality. Early diagnosis was defined as laboratory confirmation on the day of or the day after hospital admission or symptom onset. A total of 126 patients were included (median age 57 years). Timing of influenza diagnosis was not associated with the duration of antibiotic treatment, the duration of isolation precautions, or mortality. Early influenza was associated with reduced length of hospital stay (median 7 vs 9 days [P=.014]) in patients with community-acquired influenza. Although the duration of antibiotic therapy and mortality were found unaffected by early influenza diagnosis, our data indicate that it is linked with a reduction in the length of hospitalization in patients with community-acquired influenza. This highlights a need to also fully understand the effect of time to diagnosis of bacterial pathogens on antibiotic prescribing patterns in order to exploit the potential of early influenza diagnosis in patient care. © 2017 The Authors. Influenza and Other Respiratory Viruses Published by John Wiley & Sons Ltd.

Multi-approach model for improving agrochemical safety among rice farmers in Pathumthani, Thailand

Directory of Open Access Journals (Sweden)

Siriwong W

2012-07-01

safety precautions and the use of faulty protective gear. After 6 months, the intervention program showed significant improvements in the overall scores on knowledge, beliefs, behaviors, and home pesticide safety in the study group (P < 0.05. Therefore, this intervention model is effective in improving agrochemical safety behaviors among Khlong Seven Community rice farmers. These findings demonstrate that a multi-approach model for improving agrochemical safety behaviors can lead to sustainable prevention of agrochemical hazards for farmers.Keywords: rice farmer, agrochemical safety, community-based intervention, model

Systematic assessment of laser safety in otolaryngology

Science.gov (United States)

Oswal, V. H.

2001-01-01

Risk management of lasers can be broadly define das a process of identification of the risk, assessment of the risk and steps taken to avert the risk. The risk management may be divided into: Risk inherent to the technology and risk in clinical use. Within the National Health Service in the UK, a useful document, which provides hospital laser users with advice on safety, is the 'Guidance on the Safe Use of Lasers in Medical and Dental Practice' issued by the Medical Devices Agency for the Department of Health in the UK. It recommends the appointment of a Laser Protection Adviser (LPA) who is knowledgeable in the evaluation of laser hazards. One of the duties LPA is to ensure that Local Rules are drawn up for each specific application of a laser. A Laser Protection Supervisor (LPS) should also be appointed with responsibility to ensure that the Local Rules are observed. It is a sensible precaution that laser users should be those approved by the Laser Protection Supervisor in consultation with the Laser Protection Advisor. All laser users should sign a statement that they have read and understood the Local Rules.

In vitro and in vivo safety evaluation of Dipteryx alata Vogel extract

Directory of Open Access Journals (Sweden)

Esteves-Pedro Natália

2012-02-01

Full Text Available Abstract Background Dipteryx alata Vogel popularly known as "baru" is an important commercial leguminous tree species from the Brazilian Cerrado, which possess medicinal properties, besides its fruits consumption by animals and humans. The use of the "naturally occurring plants" as herbal remedies and foods mainly from leaves, seeds, flowers and roots of plants or extracts require precautions before ensuring these are safe and efficacious. The objective of this study was to evaluate the safety of D. alata barks extract. Methods Vegetal drugs of D. alata barks were submitted to quality control assays and further to the safety assays under 1 in vitro parameter by Salmonella (Ames mutagenicity, and 2 in vivo parameter on the pregnancy of rats. Results The extract was non-mutagenic to any of the assessed strains TA97a, TA98, TA100 and TA102 even after metabolic activation (+S9. All in vivo parameters (reproductive ability evaluation, physical development of rat offsprings, and neurobehavioral development assays showed no changes related to control group. Conclusion D. alata barks extract is neither mutagenic by the Ames test nor toxic in the pregnancy of rats, with no physical-neurobehavioral consequences on the rat offsprings development.

Operational and safety requirement of radiation facility

International Nuclear Information System (INIS)

Zulkafli Ghazali

2007-01-01

Gamma and electron irradiation facilities are the most common industrial sources of ionizing radiation. They have been used for medical, industrial and research purposes since the 1950s. Currently there are more than 160 gamma irradiation facilities and over 600 electron beam facilities in operation worldwide. These facilities are either used for the sterilization of medical and pharmaceutical products, the preservation of foodstuffs, polymer synthesis and modification, or the eradication of insect infestation. Irradiation with electron beam, gamma ray or ultra violet light can also destroy complex organic contaminants in both liquid and gaseous waste. EB systems are replacing traditional chemical sterilization methods in the medical supply industry. The ultra-violet curing facility, however, has found more industrial application in printing and furniture industries. Gamma and electron beam facilities produce very high dose rates during irradiation, and thus there is a potential of accidental exposure in the irradiation chamber which can be lethal within minutes. Although, the safety record of this industry has been relatively very good, there have been fatalities recorded in Italy (1975), Norway (1982), El Salvador (1989) and Israel (1990). Precautions against uncontrolled entry into irradiation chamber must therefore be taken. This is especially so in the case of gamma irradiation facilities those contain large amounts of radioactivity. If the mechanism for retracting the source is damaged, the source may remain exposed. This paper will, to certain extent, describe safety procedure and system being installed at ALURTRON, Nuclear Malaysia to eliminate accidental exposure of electron beam irradiation. (author)

Mobile phone radiation health risk controversy: the reliability and sufficiency of science behind the safety standards.

Science.gov (United States)

Leszczynski, Dariusz; Xu, Zhengping

2010-01-27

There is ongoing discussion whether the mobile phone radiation causes any health effects. The International Commission on Non-Ionizing Radiation Protection, the International Committee on Electromagnetic Safety and the World Health Organization are assuring that there is no proven health risk and that the present safety limits protect all mobile phone users. However, based on the available scientific evidence, the situation is not as clear. The majority of the evidence comes from in vitro laboratory studies and is of very limited use for determining health risk. Animal toxicology studies are inadequate because it is not possible to "overdose" microwave radiation, as it is done with chemical agents, due to simultaneous induction of heating side-effects. There is a lack of human volunteer studies that would, in unbiased way, demonstrate whether human body responds at all to mobile phone radiation. Finally, the epidemiological evidence is insufficient due to, among others, selection and misclassification bias and the low sensitivity of this approach in detection of health risk within the population. This indicates that the presently available scientific evidence is insufficient to prove reliability of the current safety standards. Therefore, we recommend to use precaution when dealing with mobile phones and, whenever possible and feasible, to limit body exposure to this radiation. Continuation of the research on mobile phone radiation effects is needed in order to improve the basis and the reliability of the safety standards.

Mobile phone radiation health risk controversy: the reliability and sufficiency of science behind the safety standards

Directory of Open Access Journals (Sweden)

Leszczynski Dariusz

2010-01-01

Full Text Available Abstract There is ongoing discussion whether the mobile phone radiation causes any health effects. The International Commission on Non-Ionizing Radiation Protection, the International Committee on Electromagnetic Safety and the World Health Organization are assuring that there is no proven health risk and that the present safety limits protect all mobile phone users. However, based on the available scientific evidence, the situation is not as clear. The majority of the evidence comes from in vitro laboratory studies and is of very limited use for determining health risk. Animal toxicology studies are inadequate because it is not possible to "overdose" microwave radiation, as it is done with chemical agents, due to simultaneous induction of heating side-effects. There is a lack of human volunteer studies that would, in unbiased way, demonstrate whether human body responds at all to mobile phone radiation. Finally, the epidemiological evidence is insufficient due to, among others, selection and misclassification bias and the low sensitivity of this approach in detection of health risk within the population. This indicates that the presently available scientific evidence is insufficient to prove reliability of the current safety standards. Therefore, we recommend to use precaution when dealing with mobile phones and, whenever possible and feasible, to limit body exposure to this radiation. Continuation of the research on mobile phone radiation effects is needed in order to improve the basis and the reliability of the safety standards.

Industrial safety management with emphasis on construction safety

International Nuclear Information System (INIS)

Bhattacharya, R.

2016-01-01

Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

Science.gov (United States)

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

Hazards in the chemical laboratory

International Nuclear Information System (INIS)

Bretherick, L.

1987-01-01

The contents of this book are: Preface; Introduction; Health and Safety at Work Act 1974; Safety Planning and Management; Fire Protection; Reactive Chemical Hazards; Chemical Hazards and Toxicology; Health Care and First Aid; Hazardous Chemicals; Precautions against Radiations; and An American View

the value of outdoor adventure activities as part of the enviro course ...

African Journals Online (AJOL)

technique of belaying is taught and specific safety precaut1ons are ... safety drills such as what to do if the canoe over- turns and the ... drive through the game area prior to the night march. ... the Wilderness Leadership School, works well with.

Operation Aqueduct: Onsite radiological safety report for announced nuclear tests, October 1989--September 1990

International Nuclear Information System (INIS)

Hernandez, G.M.; Jacklin, A.K.

1992-01-01

Aqueduct was the name assigned to the series of underground nuclear weapons tests conducted at the Nevada Test Site (NTS) from October 1, 1989, through September 30, 1990. This report includes those experiments publicly announced. Remote radiation measurements were taken during and after each nuclear event by a telemetry system. Reynolds Electrical ampersand Engineering Co., Inc. (REECO) Health Protection Department (HPD) Radiation Protection Technicians (RPTS) with portable radiation detection instruments surveyed reentry routes into ground zeros (GZ) before other planned entries were made. Continuous surveillance was provided while personnel were in radiation areas and appropriate precautions were taken to protect persons from unnecessary exposure to radiation and toxic gases. Protective clothing and equipment were issued as needed. Complete radiological safety and industrial hygiene (IH) coverage was provided during drilling and mineback operations. Telemetered and portable radiation detector measurements are listed. Detection instrumentation used is described and specific operational procedures are defined

Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

Science.gov (United States)

Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

2015-04-22

We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

Nuclear power plant safety. The merits of separation

International Nuclear Information System (INIS)

Helander, L.I.; Tiren, L.I.

1977-01-01

The paper illustrates how the physical separation of safety-related structures, systems and components can improve the protection of a nuclear power plant against multiple failures that may be caused by events such as fire, pipe-whip, missiles, flooding, hurricanes, lightning etc. Criteria for redundancy and separation requirements affect nuclear plant design in many areas such as building layout, arrangements for fire protection and ventilation, separation of mechanical systems and components, in particular emergency cooling systems, separation of electric equipment and cables. The implementation of the ensuing design criteria for a BWR power plant is described. This design involves the separation of emergency cooling systems into four 50% capacity systems, which are independent and separated, including the distribution network for electric power from on-site standby diesel generators and the circuitry for the reactor protection system. The plant is subdivided into a number of fire zones, each with its own independent ventilation system. The fire zones are further subdivided into a multitude of fire cells such that redundant subsystems are housed in separate cells. These design precautions with regard to fire are complemented by extensive fire fighting systems. (author)

Pilot Study on Harmonisation of Reactor Safety in WENRA Countries

International Nuclear Information System (INIS)

2003-03-01

Most of the objectives, set for the Pilot Study, were met. It can be concluded that the methodology was adequate for its purpose. National requirements on selected safety issues have been systematically compared and the major gaps and differences have been identified. Convenient overviews have been provided of differences and similarities between the countries. Furthermore, the conclusions are based on a safety justification and are detailed enough to provide input to a further more detailed analysis on the national level. It was not possible, however, to provide fully verified conclusions about the implementation of the reference levels in the different countries. This has to do with the following constraints on the study: In line with the Terms of Reference, the comparison of formal requirements did not address the more detailed use of criteria and methods to verify compliance. The same requirement could be enforced differently in different regulatory systems, and hence lead to different implementation. The Pilot Study also assessed the implementation, but it was not possible to do this in sufficient detail to identify such differences. The implementation was assessed on the basis of current knowledge of the respective regulatory body, but it was not possible to provide the panels with evidence of the implementation. For these reasons, conclusions about implemented safety provisions in the different countries should be drawn with precaution. The introduction of the panel assessments greatly improved the quality and consistency of the comparison assessments. Uncertainties in the assessments are mainly connected with lack of time to make a detailed analysis in some cases. The reliability of the assessments seems to be sufficient for the objectives of the Pilot Study. The introduction of the IAEA safety standards in the study proved to be helpful and provided confidence in the scope and strictness of the reference levels. This Pilot Study has contributed to

Assessment of the Knowledge and Practice of Universal Precaution ...

African Journals Online (AJOL)

TNHJOURNALPH

for the Prevention of HIV Transmission by Health Workers in Mangu Local ... the respondents included gloves (93.1%), safety goggles ... in the USA had reported 57 occupational HIV infections. ... were doctors, lab scientists/technicians,.

Mesothelioma

Science.gov (United States)

... job. Follow your employer's safety regulations Follow all safety precautions in your workplace, such as wearing protective equipment. You may also be required to shower and change out of your work clothes before taking a lunch break or going home. Talk to your doctor about ...

Health care-associated infection prevention in Japan: the role of safety culture.

Science.gov (United States)

Sakamoto, Fumie; Sakihama, Tomoko; Saint, Sanjay; Greene, M Todd; Ratz, David; Tokuda, Yasuharu

2014-08-01

Limited data exist on the use of infection prevention practices in Japan. We conducted a nationwide survey to examine the use of recommended infection prevention strategies and factors affecting their use in Japanese hospitals. Between April 1, 2012, and January 31, 2013, we surveyed 971 hospitals in Japan. The survey instrument assessed general hospital and infection prevention program characteristics and use of infection prevention practices, including practices specific to preventing catheter-associated urinary tract infection (CAUTI), central line-associated bloodstream infection (CLABSI), and ventilator-associated pneumonia (VAP). Logistic regression models were used to examine multivariable associations between hospital characteristics and the use of the various prevention practices. A total of 685 hospitals (71%) responded to the survey. Maintaining aseptic technique during catheter insertion and maintenance, avoiding routine central line changes, and using maximum sterile barrier precautions and semirecumbent positioning were the only practices regularly used by more than one-half of the hospitals to prevent CAUTI, CLABSI, and VAP, respectively. Higher safety-centeredness was associated with regular use of prevention practices across all infection types. Although certain practices were used commonly, the rate of regular use of many evidence-based prevention practices was low in Japanese hospitals. Our findings highlight the importance of fostering an organization-wide atmosphere that prioritizes patient safety. Such a commitment to patient safety should in turn promote the use of effective measures to reduce health care-associated infections in Japan. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

[Implementation of "5S" methodology in laboratory safety and its effect on employee satisfaction].

Science.gov (United States)

Dogan, Yavuz; Ozkutuk, Aydan; Dogan, Ozlem

2014-04-01

Health institutions use the accreditation process to achieve improvement across the organization and management of the health care system. An ISO 15189 quality and efficiency standard is the recommended standard for medical laboratories qualification. The "safety and accommodation conditions" of this standard covers the requirement to improve working conditions and maintain the necessary safety precautions. The most inevitable precaution for ensuring a safe environment is the creation of a clean and orderly environment to maintain a potentially safe surroundings. In this context, the 5S application which is a superior improvement tool that has been used by the industry, includes some advantages such as encouraging employees to participate in and to help increase the productivity. The main target of this study was to implement 5S methods in a clinical laboratory of a university hospital for evaluating its effect on employees' satisfaction, and correction of non-compliance in terms of the working environment. To start with, first, 5S education was given to management and employees. Secondly, a 5S team was formed and then the main steps of 5S (Seiri: Sort, Seiton: Set in order, Seiso: Shine, Seiketsu: Standardize, and Shitsuke: Systematize) were implemented for a duration of 3 months. A five-point likert scale questionnaire was used in order to determine and assess the impact of 5S on employees' satisfaction considering the areas such as facilitating the job, the job satisfaction, setting up a safe environment, and the effect of participation in management. Questionnaire form was given to 114 employees who actively worked during the 5S implementation period, and the data obtained from 63 (52.3%) participants (16 male, 47 female) were evaluated. The reliability of the questionnaire's Cronbach's alpha value was determined as 0.858 (p5S it was observed and determined that facilitating the job and setting up a safe environment created a statistically significant effect on

Patient participation in patient safety still missing: Patient safety experts' views.

Science.gov (United States)

Sahlström, Merja; Partanen, Pirjo; Rathert, Cheryl; Turunen, Hannele

2016-10-01

The aim of this study was to elicit patient safety experts' views of patient participation in promoting patient safety. Data were collected between September and December in 2014 via an electronic semi-structured questionnaire and interviews with Finnish patient safety experts (n = 21), then analysed using inductive content analysis. Patient safety experts regarded patients as having a crucial role in promoting patient safety. They generally deemed the level of patient safety as 'acceptable' in their organizations, but reported that patient participation in their own safety varied, and did not always meet national standards. Management of patient safety incidents differed between organizations. Experts also suggested that patient safety training should be increased in both basic and continuing education programmes for healthcare professionals. Patient participation in patient safety is still lacking in clinical practice and systematic actions are needed to create a safety culture in which patients are seen as equal partners in the promotion of high-quality and safe care. © 2016 John Wiley & Sons Australia, Ltd.

Fiscal 1999 phase 2 R and D report of WE-NET (International Clean Energy Network Using Hydrogen Conversion). Task 2. Research on safety measures; 1999 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) dainiki kenkyu kaihatsu seika hokokusho. Task 2. Anzen taisaku ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 WE-NET phase 2, task 2 research result on safety measures. In the study on preparation of the safety design standard, based on the concept design of the hydrogen supply station under investigation in task 7, latent anomalies and accidents, safety measures against them, and precautions for the safety design were arranged. Survey was made on databases available to collect failure rates necessary for quantitative risk assessment. In the study on establishment of a safety evaluation method, an evaporation apparatus for liquid hydrogen was prepared for comparative experiment with liquid nitrogen. Various information on flow and evaporation properties of liquid hydrogen were obtained. Survey was made on previously reported documents for hydrogen explosion experiment and preparation of an experiment plan. The simulation model for spillage, evaporation and diffusion of liquid hydrogen was verified and improved on the basis of the experiment results. A commercially available computation program for hydrogen deflagration was introduced, and its implementation was studied. (NEDO)

Associations between safety climate and safety management practices in the construction industry.

Science.gov (United States)

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

Radioprotection regulations of working place and the principle of precaution

International Nuclear Information System (INIS)

Maisseu, A.

2004-01-01

The World Council of Nuclear Workers, WONUC is an association of the Unions and any other organized bodies of the world's nuclear professionals and workers from industry, research and administration involved in nuclear technologies. WONUC is recognized as an N.G.O. by United Nations. It has a deep interest in radiation protection and in the assessment of the hazards associated with the biological effects of low and very low doses of ionizing radiation for at least three reasons: 1.The nuclear workers represent, with radiologists and technicians in hospitals, the largest group of workers for whom exposure to ionizing radiation is the main occupational hazard. 2.Their families usually live in the vicinity of nuclear plants. 3.They will be in charge of the implementation of any regulations. For these reasons, nuclear workers are very much concerned by the controversies which have arisen with regard to the dose limit and the LNT assessment of the risks associated with exposure to low and very low doses of radiation. This debate is of major importance for the future of the radiation protection system for our working conditions in ionizing environment. Two pitfalls must be avoided: fuelling unjustified anxiety on doubtful bases (the analysis of the Chernobyl data show that unjustified anxiety has been more harmful than ionising radiation) or underestimating the risks associated with exposure to ionizing radiation. As it is clear that following topics: The linear no threshold relationship, the effect of dose rate, DNA repair mechanisms, or indirect effects such as genomic instability and bystander effects, Hormesis, To assess the uncertainty of the various risk assessments and to analyse the scientific ways through which these uncertainties could be reduced, ought to be still discussed, the World Council of Nuclear Worker is claiming for the application of the principle of precaution to have the best advantage of the radiation protection system which will cover any

Pragmatic application of the precautionary principle to deal with unknown safety challenges

Energy Technology Data Exchange (ETDEWEB)

Frappier, G.; Viktorov, A., E-mail: gerry.frappier@cnsc-ccsn.gc.ca, E-mail: alex.viktorov@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada)

2011-07-01

Nuclear power technology has matured over a number of decades to the point where our understanding of the technology under a wide variety of circumstances is quite high. Despite this high degree of maturity, discoveries of new challenges occasionally surface. These may arise from either unusual or unexpected operational conditions or new experimental findings from ongoing research. With the early realization that such discoveries could occur, a conscious effort was made to take precautions against their negative impacts. Principles such as defence-in-depth, designing for high reliability, incorporation of robust safety margins and use of justified conservatisms are key examples of established practices that are embedded in national regulatory regimes of most, if not all countries with nuclear programs. Because of these provisions the safety cases of the current generation of reactors proved to be quite resilient to discoveries of earlier unrecognized challenges. A fundamentally important element in the management of “unknown unknowns” is a healthy research programme. Such a programme is especially necessary as a precondition for understanding potential impacts from changes in operating conditions or implementation of novel design features. A research programme helps minimizing chances of stumbling on “unknown unknowns”, and allows resolution of emerging issues to by virtue of the accumulated understanding and capability to predict challenges to safety. In the few instances when discoveries occurred with recognized negative effects on safety, these spurred changes in operating conditions, maintenance or testing practices, design modifications, as well as required targeted research projects. This paper outlines several CANDU-specific “discoveries” in the field of thermalhydraulics, illustrating past “unknown unknowns” and the actions taken to address those. The main message, however, is to point out that both the industry and the regulator should

Pragmatic application of the precautionary principle to deal with unknown safety challenges

International Nuclear Information System (INIS)

Frappier, G.; Viktorov, A.

2011-01-01

Nuclear power technology has matured over a number of decades to the point where our understanding of the technology under a wide variety of circumstances is quite high. Despite this high degree of maturity, discoveries of new challenges occasionally surface. These may arise from either unusual or unexpected operational conditions or new experimental findings from ongoing research. With the early realization that such discoveries could occur, a conscious effort was made to take precautions against their negative impacts. Principles such as defence-in-depth, designing for high reliability, incorporation of robust safety margins and use of justified conservatisms are key examples of established practices that are embedded in national regulatory regimes of most, if not all countries with nuclear programs. Because of these provisions the safety cases of the current generation of reactors proved to be quite resilient to discoveries of earlier unrecognized challenges. A fundamentally important element in the management of “unknown unknowns” is a healthy research programme. Such a programme is especially necessary as a precondition for understanding potential impacts from changes in operating conditions or implementation of novel design features. A research programme helps minimizing chances of stumbling on “unknown unknowns”, and allows resolution of emerging issues to by virtue of the accumulated understanding and capability to predict challenges to safety. In the few instances when discoveries occurred with recognized negative effects on safety, these spurred changes in operating conditions, maintenance or testing practices, design modifications, as well as required targeted research projects. This paper outlines several CANDU-specific “discoveries” in the field of thermalhydraulics, illustrating past “unknown unknowns” and the actions taken to address those. The main message, however, is to point out that both the industry and the regulator should

Patient Safety Culture

DEFF Research Database (Denmark)

Kristensen, Solvejg

of health care professional’s behaviour, habits, norms, values, and basic assumptions related to patient care; it is the way things are done. The patient safety culture guides the motivation, commitment to and know-how of the safety management, and how all members of a work place interact. This thesis......Patient safety is highly prioritised in the Danish health care system, never the less, patients are still exposed to risk and harmed every day. Implementation of a patient safety culture has been suggested an effective mean to protect patients against adverse events. Working strategically...

SRC-I demonstration plant analytical laboratory methods manual. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

1983-03-01

This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

requirements and safety precautions for transport beyond the site, off-site storage and ultimate disposal of irradiated fuel and core components are beyond the scope of this publication. Aspects of fuel accounting not directly related to nuclear safety are not considered in this publication. Thus, safeguards are beyond the scope of this publication. Section 2 provides guidance on the core management programme. Section 3 identifies the main aspects of handling and storage of fresh fuel. Section 4 gives guidance on the implementation of the refuelling programme. Section 5 explains the different aspects of handling, storage and inspection of irradiated fuel. Section 6 deals with the handling of core components, in particular those that have been irradiated. Section 7 provides general recommendations on the preparatory arrangements in connection with fuel dispatch from the site. Sections 8 and 9 give guidance on administrative and organizational arrangements for fuel management, including general aspects of documentation

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

requirements and safety precautions for transport beyond the site, off-site storage and ultimate disposal of irradiated fuel and core components are beyond the scope of this publication. Aspects of fuel accounting not directly related to nuclear safety are not considered in this publication; thus, safeguards are beyond the scope of this publication. Section 2 provides guidance on the core management programme. Section 3 identifies the main aspects of handling and storage of fresh fuel. Section 4 gives guidance on the implementation of the refuelling programme. Section 5 explains the different aspects of handling, storage and inspection of irradiated fuel. Section 6 deals with the handling of core components, in particular those that have been irradiated. Section 7 provides general recommendations on the preparatory arrangements in connection with fuel dispatch from the site. Sections 8 and 9 give guidance on administrative and organizational arrangements for fuel management, including general aspects of documentation

Evaluation of contact precautions for methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococcus.

Science.gov (United States)

Bardossy, Ana Cecilia; Alsafadi, Muhammad Yasser; Starr, Patricia; Chami, Eman; Pietsch, Jennifer; Moreno, Daniela; Johnson, Laura; Alangaden, George; Zervos, Marcus; Reyes, Katherine

2017-12-01

There are limited controlled data demonstrating contact precautions (CPs) prevent methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) infections in endemic settings. We evaluated changes in hospital-acquired MRSA and VRE infections after discontinuing CPs for these organisms. This is a retrospective study done at an 800-bed teaching hospital in urban Detroit. CPs for MRSA and VRE were discontinued hospital-wide in 2013. Data on MRSA and VRE catheter-associated urinary tract infections (CAUTIs), ventilator-associated pneumonia (VAP), central line-associated bloodstream infections (CLABSIs), surgical site infections (SSIs), and hospital-acquired MRSA bacteremia (HA-MRSAB) rates were compared before and after CPs discontinuation. There were 36,907 and 40,439 patients hospitalized during the two 12-month periods: CPs and no CPs. Infection rates in the CPs and no-CPs periods were as follows: (1) MRSA infections: VAP, 0.13 versus 0.11 (P = .84); CLABSI, 0.11 versus 0.19 (P = .45); SSI, 0 versus 0.14 (P = .50); and CAUTI, 0.025 versus 0.033 (P = .84); (2) VRE infections: CAUTI, 0.27 versus 0.13 (P = .19) and CLABSI, 0.29 versus 0.3 (P = .94); and (3) HA-MRSAB rates: 0.14 versus 0.11 (P = .55), respectively. Discontinuation of CPs did not adversely impact endemic MRSA and VRE infection rates. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Reconsidering contact precautions for endemic methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococcus.

Science.gov (United States)

Morgan, Daniel J; Murthy, Rekha; Munoz-Price, L Silvia; Barnden, Marsha; Camins, Bernard C; Johnston, B Lynn; Rubin, Zachary; Sullivan, Kaede V; Shane, Andi L; Dellinger, E Patchen; Rupp, Mark E; Bearman, Gonzalo

2015-10-01

Whether contact precautions (CP) are required to control the endemic transmission of methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant Enterococcus (VRE) in acute care hospitals is controversial in light of improvements in hand hygiene, MRSA decolonization, environmental cleaning and disinfection, fomite elimination, and chlorhexidine bathing. To provide a framework for decision making around use of CP for endemic MRSA and VRE based on a summary of evidence related to use of CP, including impact on patients and patient care processes, and current practices in use of CP for MRSA and VRE in US hospitals. A literature review, a survey of Society for Healthcare Epidemiology of America Research Network members on use of CP, and a detailed examination of the experience of a convenience sample of hospitals not using CP for MRSA or VRE. Hospital epidemiologists and infection prevention experts. No high quality data support or reject use of CP for endemic MRSA or VRE. Our survey found more than 90% of responding hospitals currently use CP for MRSA and VRE, but approximately 60% are interested in using CP in a different manner. More than 30 US hospitals do not use CP for control of endemic MRSA or VRE. Higher quality research on the benefits and harms of CP in the control of endemic MRSA and VRE is needed. Until more definitive data are available, the use of CP for endemic MRSA or VRE in acute care hospitals should be guided by local needs and resources.

Technical organization of safety authorities for the event of an accident at a nuclear installation

International Nuclear Information System (INIS)

Scherrer, J.; Evrard, J.M.; Ney, J.

1986-01-01

Within the general context of nuclear safety, the Central Nuclear Installation Safety Service of the French Ministry for Industry and its technical backup, the Institute for Radiation Protection and Nuclear Safety of the CEA (Atomic Energy Commission), have established a special organization designed to provide real-time forecasts of the evolution of a nuclear accident situation with sufficient forewarning for the local representative of the Government (the Commissaire de la Republique in the Departement affected) to implement, as required, effective countermeasures to protect the population - for example, confinement indoors or evacuation. Descriptions are given of the principles of this organization and the particular precautions taken to confront the problems of mobilizing experts and of dealing with the saturation of normal telecommunications channels to be expected in the event of a nuclear accident. The organization set up for the installations belonging to Electricite de France is given as a detailed example. Particular stress is placed on the organizational arrangements of the Institute for Radiation Protection and Nuclear Safety designed to provide the emergency teams with the evaluation and forecasting tools they require to carry out their tasks. The procedures are on the whole well developed for atmospheric radioactivity transport, for which operational models already exist. Computer-backed methods with improved performance are at present being developed. A method of forecasting the behaviour of the releases resulting from nuclear accidents is set out for pressurized water reactors, based on evaluating the physical state of the installation, confinement integrity, availability of safety and backup systems, support systems and feed sources and on forecasting how this state will develop on the basis of measured and inferred physical values transmitted from the affected power station through a national network. The experience acquired during accident

Human papillomavirus (HPV) vaccine knowledge, attitudes, and uptake in college students: Implications from the Precaution Adoption Process Model

Science.gov (United States)

2017-01-01

The purpose of this study was to examine human papillomavirus (HPV) and HPV vaccine knowledge, attitudes, and uptake in college students and to identify factors associated with vaccination status utilizing the Precaution Adoption Process Model (PAPM). The sample included 383 undergraduates from a public university who participated in February and March 2015. Students were emailed an anonymous online survey assessing knowledge, attitudes, and perceptions related to HPV and HPV vaccination, as well as their stage in the PAPM regarding vaccination completion. Significantly more females (47.3%) than males (15.8%) were vaccinated. While most students had basic knowledge of HPV, they had low perceptions of their susceptibility to contract HPV. Most unvaccinated students were in the early stages of decision-making related to vaccination. Campus health centers have an opportunity to increase HPV vaccination rates. This study indicates that students need prompts from providers, as well as education regarding susceptibility to HPV. PMID:28786994

Laser Holography.

Science.gov (United States)

Rapp, Carl Steven

1997-01-01

Discusses the principles behind holograms: the design and procedure to make either a reflection hologram or a transmission hologram, developing the hologram, safety precautions, and classroom applications. (JRH)

Chemical Safety Alert: Lightning Hazard to Facilities Handling Flammable Substances

Science.gov (United States)

Raises awareness about lightning strikes, which cause more death/injury and damage than all other environmental elements combined, so industry can take proper precautions to protect equipment and storage or process vessels containing flammable materials.

Total safety management: An approach to improving safety culture

International Nuclear Information System (INIS)

Blush, S.M.

1993-01-01

A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobyl nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair

Development of a Novel Nuclear Safety Culture Evaluation Method for an Operating Team Using Probabilistic Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Han, Sangmin; Lee, Seung Min; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

2015-05-15

IAEA defined safety culture as follows: 'Safety Culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance'. Also, celebrated behavioral scientist, Cooper, defined safety culture as,'safety culture is that observable degree of effort by which all organizational members direct their attention and actions toward improving safety on a daily basis' with his internal psychological, situational, and behavioral context model. With these various definitions and criteria of safety culture, several safety culture assessment methods have been developed to improve and manage safety culture. To develop a new quantitative safety culture evaluation method for an operating team, we unified and redefined safety culture assessment items. Then we modeled a new safety culture evaluation by adopting level 1 PSA concept. Finally, we suggested the criteria to obtain nominal success probabilities of assessment items by using 'operational definition'. To validate the suggested evaluation method, we analyzed the collected audio-visual recording data collected from a full scope main control room simulator of a NPP in Korea.

Development of a Novel Nuclear Safety Culture Evaluation Method for an Operating Team Using Probabilistic Safety Analysis

International Nuclear Information System (INIS)

Han, Sangmin; Lee, Seung Min; Seong, Poong Hyun

2015-01-01

IAEA defined safety culture as follows: 'Safety Culture is that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance'. Also, celebrated behavioral scientist, Cooper, defined safety culture as,'safety culture is that observable degree of effort by which all organizational members direct their attention and actions toward improving safety on a daily basis' with his internal psychological, situational, and behavioral context model. With these various definitions and criteria of safety culture, several safety culture assessment methods have been developed to improve and manage safety culture. To develop a new quantitative safety culture evaluation method for an operating team, we unified and redefined safety culture assessment items. Then we modeled a new safety culture evaluation by adopting level 1 PSA concept. Finally, we suggested the criteria to obtain nominal success probabilities of assessment items by using 'operational definition'. To validate the suggested evaluation method, we analyzed the collected audio-visual recording data collected from a full scope main control room simulator of a NPP in Korea

Safety Justification and Safety Case for Safety-critical Software in Digital Reactor Protection System

International Nuclear Information System (INIS)

Kwon, Kee-Choon; Lee, Jang-Soo; Jee, Eunkyoung

2016-01-01

Nuclear safety-critical software is under strict regulatory requirements and these regulatory requirements are essential for ensuring the safety of nuclear power plants. The verification & validation (V and V) and hazard analysis of the safety-critical software are required to follow regulatory requirements through the entire software life cycle. In order to obtain a license from the regulatory body through the development and validation of safety-critical software, it is essential to meet the standards which are required by the regulatory body throughout the software development process. Generally, large amounts of documents, which demonstrate safety justification including standard compliance, V and V, hazard analysis, and vulnerability assessment activities, are submitted to the regulatory body during the licensing process. It is not easy to accurately read and evaluate the whole documentation for the development activities, implementation technology, and validation activities. The safety case methodology has been kwon a promising approach to evaluate the level and depth of the development and validation results. A safety case is a structured argument, supported by a body of evidence that provides a compelling, comprehensible, and valid case that a system is safe for a given application in a given operating environment. It is suggested to evaluate the level and depth of the results of development and validation by applying safety case methodology to achieve software safety demonstration. A lot of documents provided as evidence are connected to claim that corresponds to the topic for safety demonstration. We demonstrated a case study in which more systematic safety demonstration for the target system software is performed via safety case construction than simply listing the documents

Safety Justification and Safety Case for Safety-critical Software in Digital Reactor Protection System

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee-Choon; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jee, Eunkyoung [KAIST, Daejeon (Korea, Republic of)

2016-10-15

Nuclear safety-critical software is under strict regulatory requirements and these regulatory requirements are essential for ensuring the safety of nuclear power plants. The verification & validation (V and V) and hazard analysis of the safety-critical software are required to follow regulatory requirements through the entire software life cycle. In order to obtain a license from the regulatory body through the development and validation of safety-critical software, it is essential to meet the standards which are required by the regulatory body throughout the software development process. Generally, large amounts of documents, which demonstrate safety justification including standard compliance, V and V, hazard analysis, and vulnerability assessment activities, are submitted to the regulatory body during the licensing process. It is not easy to accurately read and evaluate the whole documentation for the development activities, implementation technology, and validation activities. The safety case methodology has been kwon a promising approach to evaluate the level and depth of the development and validation results. A safety case is a structured argument, supported by a body of evidence that provides a compelling, comprehensible, and valid case that a system is safe for a given application in a given operating environment. It is suggested to evaluate the level and depth of the results of development and validation by applying safety case methodology to achieve software safety demonstration. A lot of documents provided as evidence are connected to claim that corresponds to the topic for safety demonstration. We demonstrated a case study in which more systematic safety demonstration for the target system software is performed via safety case construction than simply listing the documents.

Governing nanobiotechnology: lessons from agricultural biotechnology regulation

International Nuclear Information System (INIS)

Johnson, Robbin S.

2011-01-01

This article uses lessons from biotechnology to help inform the design of oversight for nanobiotechnology. Those lessons suggest the following: first, oversight needs to be broadly defined, encompassing not just regulatory findings around safety and efficacy, but also public understanding and acceptance of the technology and its products. Second, the intensity of scrutiny and review should reflect not just risks but also perceptions of risk. Finally, a global marketplace argues for uniform standards or commercially practical solutions to differences in standards. One way of designing oversight to achieve these purposes is to think about it in three phases—precaution, prudence, and promotion. Precaution comes early in the technology or product’s development and reflects real and perceived uncertainties. Prudence governs when risks and hazards have been identified, containment approaches established, and benefits broadly defined. Transparency and public participation rise to the fore. The promotional phase moves toward shaping public understanding and acceptance and involves marketing issues rather than safety ones. This flexible, three-phase approach to oversight would have avoided some of the early regulatory problems with agricultural biotechnology. It also would have led to a more risk-adjusted pathway to regulatory approval. Furthermore, it would avoid some of the arbitrary, disruptive marketing issues that have arisen.

Applications of probabilistic risk analysis in nuclear criticality safety design

International Nuclear Information System (INIS)

Chang, J.K.

1992-01-01

Many documents have been prepared that try to define the scope of the criticality analysis and that suggest adding probabilistic risk analysis (PRA) to the deterministic safety analysis. The report of the US Department of Energy (DOE) AL 5481.1B suggested that an accident is credible if the occurrence probability is >1 x 10 -6 /yr. The draft DOE 5480 safety analysis report suggested that safety analyses should include the application of methods such as deterministic safety analysis, risk assessment, reliability engineering, common-cause failure analysis, human reliability analysis, and human factor safety analysis techniques. The US Nuclear Regulatory Commission (NRC) report NRC SG830.110 suggested that major safety analysis methods should include but not be limited to risk assessment, reliability engineering, and human factor safety analysis. All of these suggestions have recommended including PRA in the traditional criticality analysis

Safety leadership: application in construction site.

Science.gov (United States)

Cooper, Dominic

2010-01-01

The extant safety literature suggests that managerial Safety Leadership is vital to the success and maintenance of a behavioral safety process. The current paper explores the role of Managerial Safety Leadership behaviors in the success of a behavioral safety intervention in the Middle-East with 47,000 workers from multiple nationalities employed by fourteen sub-contractors and one main contractor. A quasi-experimental repeating ABABAB, within groups design was used. Measurement focused on managerial Safety Leadership and employee safety behaviors as well as Corrective Actions. Data was collected over 104 weeks. During this time, results show safety behavior improved by 30 percentage points from an average of 65% during baseline to an average of 95%. The site achieved 121 million man-hours free of lost-time injuries on the longest run. Stepwise multiple regression analyses indicated 86% of the variation in employee safety behavior was associated with senior, middle and front-line manager's Safety Leadership behaviors and the Corrective Action Rate. Approximately 38% of the variation in the Total Recordable Incident Rate (TRIR) was associated with the Observation rate, Corrective Action Rate and Observers Records of managerial safety leaders (Visible Ongoing Support). The results strongly suggest manager's Safety Leadership influences the success of Behavioral Safety processes.

An Excel-Based System to Manage Radiation Safety for the Family of Patients Undergoing 131I Therapy.

Science.gov (United States)

Steward, Palmer G

2017-06-01

The purpose of this study was to develop spreadsheet workbooks that assist in the radiation safety counseling of 131 I therapy patients and their families, providing individualized guidelines that avoid imposing overly conservative restrictions on family members and others. Methods: The mathematic model included biphasic patient radionuclide retention. The extrathyroidal component was a cylindric volume with a diameter corresponding to the patient's size and included patient self-absorption, whereas the thyroidal component was a point source whose transmission was reduced by self-absorption. A separate model in which the thyroid, extrathyroid, and bladder compartments fed serially from one to the next was developed to depict the radionuclide levels within the patient and to estimate the activity entering the environment at each urination. Results: The system was organized into a set of 4 workbooks: the first to be used with ablation patients prepared using thyrogen, the second with ablation patients prepared by deprivation, the third with hyperthyroid patients, and the fourth with the unusual hyperthyroid patient who finds the restrictions to be oppressive and returns 5-10 d after administration for a measurement and reassessment. The workbooks evaluated the radiation field strength external to the patient and indicated restrictions based on selected dose limits. To assist physicians in suggesting contamination precautions, the workbooks also evaluated the radioactivity present within the patient and the estimated discharge into the environment as a function of time. Conclusion: The workbooks that were developed assist the radiation safety counselor in individualizing radiation protection procedures for the family of patients undergoing 131 I therapy. The workbook system avoids overly conservative assumptions while permitting selection of appropriate dose limits for each individual. © 2017 by the Society of Nuclear Medicine and Molecular Imaging.

Safety system status monitoring

International Nuclear Information System (INIS)

Lewis, J.R.; Morgenstern, M.H.; Rideout, T.H.; Cowley, P.J.

1984-03-01

The Pacific Northwest Laboratory has studied the safety aspects of monitoring the preoperational status of safety systems in nuclear power plants. The goals of the study were to assess for the NRC the effectiveness of current monitoring systems and procedures, to develop near-term guidelines for reducing human errors associated with monitoring safety system status, and to recommend a regulatory position on this issue. A review of safety system status monitoring practices indicated that current systems and procedures do not adequately aid control room operators in monitoring safety system status. This is true even of some systems and procedures installed to meet existing regulatory guidelines (Regulatory Guide 1.47). In consequence, this report suggests acceptance criteria for meeting the functional requirements of an adequate system for monitoring safety system status. Also suggested are near-term guidelines that could reduce the likelihood of human errors in specific, high-priority status monitoring tasks. It is recommended that (1) Regulatory Guide 1.47 be revised to address these acceptance criteria, and (2) the revised Regulatory Guide 1.47 be applied to all plants, including those built since the issuance of the original Regulatory Guide

Safety system status monitoring

Energy Technology Data Exchange (ETDEWEB)

Lewis, J.R.; Morgenstern, M.H.; Rideout, T.H.; Cowley, P.J.

1984-03-01

The Pacific Northwest Laboratory has studied the safety aspects of monitoring the preoperational status of safety systems in nuclear power plants. The goals of the study were to assess for the NRC the effectiveness of current monitoring systems and procedures, to develop near-term guidelines for reducing human errors associated with monitoring safety system status, and to recommend a regulatory position on this issue. A review of safety system status monitoring practices indicated that current systems and procedures do not adequately aid control room operators in monitoring safety system status. This is true even of some systems and procedures installed to meet existing regulatory guidelines (Regulatory Guide 1.47). In consequence, this report suggests acceptance criteria for meeting the functional requirements of an adequate system for monitoring safety system status. Also suggested are near-term guidelines that could reduce the likelihood of human errors in specific, high-priority status monitoring tasks. It is recommended that (1) Regulatory Guide 1.47 be revised to address these acceptance criteria, and (2) the revised Regulatory Guide 1.47 be applied to all plants, including those built since the issuance of the original Regulatory Guide.

Environment and globalization: equity and precautionary principles in the climate negotiation; Environnement et mondialisation. Principes d'equite et de precaution dans la negociation climat

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

Interviews and articles are dealing with the relationship between international trade and environment (WTO and agreements on the environment), the equity dimension in the negotiations on climate, the relationship between greenhouse effect and nuclear (a balance of precautions), the place of sustainable development in international discussions (the role of authorities created by the Rio conference), the French plan against the greenhouse effect, the weakness of the French policy on greenhouse gases, the joint application, the African example, the place of forestry projects in Kyoto mechanisms, the evolution from the joint North-South application to the self-development mechanism

Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-01-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross- sectional study was conducted among 160 non- industrial welding workers in Udupi district. A pre-structured interviewer-administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-09-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross--‐ sectional study was conducted among 160 non--‐ industrial welding workers in Udupi district. A pre--‐structured interviewer--‐administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

Facts on Three Mile Island. IV

International Nuclear Information System (INIS)

Hermansky

1980-01-01

A number of commissions and committees were established in the USA following the Three Mile Island-2 accident, charged with investigating the causes of the accident and suggesting precautions which would limit future possible occurrences of such accidents. The recommendations by the most significant bodies are briefly outlined, including the: (1) instructions by NRC for the operators of PWR type nuclear power plants; (2) recommendations by the Kemeny commission appointed by president Carter; (3) recommendations by the Advisory Committee for Reactor Safety (ACRS); (4) measures taken by the Tennessee Valley Authority. (Ha)

Intermediate probabilistic safety assessment approach for safety critical digital systems

International Nuclear Information System (INIS)

Taeyong, Sung; Hyun Gook, Kang

2001-01-01

Even though the conventional probabilistic safety assessment methods are immature for applying to microprocessor-based digital systems, practical needs force to apply it. In the Korea, UCN 5 and 6 units are being constructed and Korean Next Generation Reactor is being designed using the digital instrumentation and control equipment for the safety related functions. Korean regulatory body requires probabilistic safety assessment. This paper analyzes the difficulties on the assessment of digital systems and suggests an intermediate framework for evaluating their safety using fault tree models. The framework deals with several important characteristics of digital systems including software modules and fault-tolerant features. We expect that the analysis result will provide valuable design feedback. (authors)

Hospital safety climate and safety behavior: A social exchange perspective.

Science.gov (United States)

Ancarani, Alessandro; Di Mauro, Carmela; Giammanco, Maria D

Safety climate is considered beneficial to the improvement of hospital safety outcomes. Nevertheless, the relations between two of its key constituents, namely those stemming from leader-subordinate relations and coworker support for safety, are still to be fully ascertained. This article uses the theoretical lens of Social Exchange Theory to study the joint impact of leader-member exchange in the safety sphere and coworker support for safety on safety-related behavior at the hospital ward level. Social exchange constructs are further related to the existence of a shame-/blame-free environment, seen as a potential antecedent of safety behavior. A cross-sectional study including 166 inpatients in hospital wards belonging to 10 public hospitals in Italy was undertaken to test the hypotheses developed. Hypothesized relations have been analyzed through a fully mediated multilevel structural equation model. This methodology allows studying behavior at the individual level, while keeping into account the heterogeneity among hospital specialties. Results suggest that the linkage between leader support for safety and individual safety behavior is mediated by coworker support on safety issues and by the creation of a shame-free environment. These findings call for the creation of a safety climate in which managerial efforts should be directed not only to the provision of new safety resources and the enforcement of safety rules but also to the encouragement of teamwork and freedom to report errors as ways to foster the capacity of the staff to communicate, share, and learn from each other.

New Zealand code for nuclear powered shipping

International Nuclear Information System (INIS)

1976-06-01

This report recommends guidelines for the safety precautions and procedures to be implemented when New Zealand ports and approaches are used by nuclear powered merchant ships and nuclear powered naval ships

76 FR 30495 - National Safe Boating Week, 2011

Science.gov (United States)

2011-05-25

... precautions and sensible behavior when spending time on the water. Safe boating is responsible boating. Individuals can prepare for excursions by taking boating safety courses and filing float plans with family...

Nuclear safety in France

International Nuclear Information System (INIS)

Tanguy, P.

1979-01-01

A brief description of the main safety aspects of the French nuclear energy programme and of the general safety organization is followed by a discussion on the current thinking in CEA on some important safety issues. As far as methodology is concerned, the use of probabilistic analysis in the licensing procedure is being extensively developed. Reactor safety research is aimed at a better knowledge of the safety margins involved in the present designs of both PWRs and LMFBRs. A greater emphasis should be put during the next years in the safety of the nuclear fuel cycle installations, including waste disposals. Finally, it is suggested that further international cooperation in the field of nuclear safety should be developed in order to insure for all countries the very high safety level which has been achieved up till now. (author)

Machining of uranium and uranium alloys

International Nuclear Information System (INIS)

Morris, T.O.

1981-01-01

Uranium and uranium alloys can be readily machined by conventional methods in the standard machine shop when proper safety and operating techniques are used. Material properties that affect machining processes and recommended machining parameters are discussed. Safety procedures and precautions necessary in machining uranium and uranium alloys are also covered. 30 figures

Fire fighting precautions at Bohunice Atomic Power Plants

International Nuclear Information System (INIS)

Anon.

1984-01-01

Some shortcomings are discussed of the project design of fire protection at the V-1 and V-2 nuclear power plants. The basic shortcoming of the system is insufficient division of the units for fire protection. Fire fighting measures are described for cable areas, switch houses and outside transformers, primary and secondary circuits and auxiliary units. Measures are presented for increasing fire safety in Jaslovske Bohunice proceedi.ng from experience gained with a fire which had occurred at a nuclear power plant in Armenia. (E.S.)

Level of Evidence Associated with FDA Safety Communications with Drug Labeling Changes: 2010-2014

Directory of Open Access Journals (Sweden)

Benjamin Hixon

2017-02-01

Full Text Available Purpose: Approximately 800,000 safety reports are submitted to the FDA annually, however, only significant issues generate drug safety communications (DSC. The purpose of this study was to determine the type of clinical evidence used to warrant a change in drug labeling for drugs with DSC between January 1, 2010 and December 31, 2014. Methods: Selected data was obtained from the FDA website. The primary endpoint of the study was the frequency of the types of clinical evidence used in FDA communications, as reported through the FDA DSC. Results were evaluated via descriptive statistics, and chi-squared for nominal data. Results: A total of 2521 drug safety labeling changes were identified and 99 (3.9% of safety communications met the inclusion criteria. The majority of the labeling changes were associated with single agents (83.8%. The three most frequently reported labeling changes were warnings (68.7%, precautions (58.6%, and patient package insert/medication guide (23.2%. Case reports resulted in the greatest number of documented literature types (n = 791, followed by randomized controlled trials (n = 76, and case control/cohort studies (n = 74. Significantly more evidence for DSCs were classified as Level of Evidence B (LOE B, 68.6%, compared to LOE A (17.1%, and LOE C (14.1% (p = 0.007. Conclusions: The majority of drug labeling change initiators was associated with LOE equivalent to B. Practitioners should evaluate data associated with labeling changes to determine how to interpret the information for their patients. Conflict of Interest We declare no conflicts of interest or financial interests that the authors or members of their immediate families have in any product or service discussed in the manuscript, including grants (pending or received, employment, gifts, stock holdings or options, honoraria, consultancies, expert testimony, patents and royalties.   Type: Original Research

Innovation and Safety. A prestudy

International Nuclear Information System (INIS)

Rollenhagen, Carl; Hansson, Sven Ove; Hortberg, Johan; Jakobsson, Fredrik; Zhau, Victoria Jing; Mojeri, Sara

2010-04-01

The project summarized in this report was initiated to explore relations between innovation and safety. The first two sections of the report discuss some previously conducted research and give a general background to the subject. It is concluded that safety research and innovation research, by and large, has developed as separate academic disciplines. The concepts of 'innovative safety culture' and 'safe innovation cultures' are suggested as two concepts that can be used to integrate research: innovative safety cultures depart from safety culture research but attempts to introduce an innovative dimension with the aim to create adaptive and innovative safety cultures that efficiently can handle risks arising from existing innovations. Safe innovation cultures have focus on innovation itself, but with the ambition to introduce concepts and methods from safety research in the innovative processes. Three subprojects conducted in the context of the present research are summarized. The first project examines how an existing organization (e.g. SKB - Swedish Nuclear Fuel and Waste Management) attempts to integrate both innovative activities and operative activities in the same organisation. Interviews with key personnel explored different views about how innovative and safety work coexists in the organisation. The second project focuses on how major retrofit projects of a nuclear power plant is managed in parallel to operative activities (e.g. operating the plant on an everyday basis). By means of an innovative technique (e.g. system groups) seminars were held to suggest improvements in the technical change process. The third project conducted a risk analysis of a major organisational change (e.g. control centres for energy distribution). Experiences from the three projects are finally discussed in terms of similarities and differences associated with the cultures for innovation and safety. Suggestions for further research are made

Safety guidelines for magnetic resonance diagnostic facilities (1991)

International Nuclear Information System (INIS)

1992-01-01

These guidelines provide information on levels and health effects of exposure to magnetic and radiofrequency electromagnetic fields associated with magnetic resonance (MR) devices, and on precautions to minimize effects on patients, staff, and the general public. The guidelines are for use by regulatory authorities, MR users and health professionals. 22 refs., 1 tab

The issue of safety in the transports of radioactive materials

International Nuclear Information System (INIS)

Pallier, Lucien

1961-01-01

This report addresses and discusses the various hazards associated with transports of radioactive materials, their prevention, intervention measures, and precautions to be taken by rescuers, notably how these issues are addressed in regulations. For each of these issues, this report proposes guidelines, good practices, or procedures to handle the situation. The author first addresses hazards related to a transport of radioactive products: multiplicity of hazards, different hazards due to radioactivity, hazards due to transport modes, scale of dangerous doses. The second part addresses precautionary measures: for road transports, for air transports, for maritime transports, control procedures. The third part addresses the intervention in case of accident: case of a road accident with an unhurt or not vehicle crew, role of the first official rescuers, other kinds of accidents. The fourth part briefly addresses the case of transport of fissile materials. The fifth part discusses the implications of safety measures. Appendices indicate standards, and give guidelines for the construction of a storage building for radioactive products, for the control and storage of parcels containing radioactive products, and for the establishment of instructions for the first aid personnel

Economic consideration of nuclear safety and cost benefit analysis in nuclear safety regulation

International Nuclear Information System (INIS)

Choi, Y. S.; Choi, K. S.; Choi, K. W.; Song, I. J.; Park, D. K.

2001-01-01

For the optimization of nuclear safety regulation, understanding of economic aspects of it becomes increasingly important together with the technical approach used so far to secure nuclear safety. Relevant economic theories on private and public goods were reviewed to re-illuminate nuclear safety from the economic perspective. The characteristics of nuclear safety as a public good was reviewed and discussed in comparison with the car safety as a private safety good. It was shown that the change of social welfare resulted from the policy change induced can be calculated by the summation of compensating variation(CV) of individuals. It was shown that the value of nuclear safety could be determined in monetary term by this approach. The theoretical background and history of cost benefit analysis of nuclear safety regulation were presented and topics for future study were suggested

Knowledge, practice and factors associated with poor compliance ...

African Journals Online (AJOL)

USER

universal precautions among healthcare workers at Bugando Medical. Centre ..... therefore should be prohibited in the healthcare facilities in line with the Occupational Safety and. Health Administration (OSHA) guidelines (Janjua et al., 2007).

Development of safety analysis technology for integral reactor; evaluation on safety concerns of integral reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Hee Chul; Kim, Woong Sik; Lee, J. H. [Korea Institute of Nuclear Safety, Taejeon (Korea)

2002-03-01

The Nuclear Desalination Plant (NDP) is being developed to produce electricity and fresh water, and is expected to locate near population zone. In the aspect of safety, it is required to protect the public and environment from the possible releases of fission products and to prevent the fresh water from the contamination of radioactivity. Thus, in this study, the safety characteristics of the integral reactor adopting passive and inherent safety features significantly different from existing nuclear power plants were investigated. Also, safety requirements applicable to the NDP were analyzed based on the regulatory requirements for current light water reactor and advanced reactor designs, and user requirements for small-medium size reactors. Based on these analyses, some safety concerns to be considered in the design stage have been identified and discussed. They include the use of proven technology for new safety features, systematic event classification and selection, strengthening containment function, and the safety impacts on desalination-related systems. The study presents the general safety requirements applicable to licensing of an integral reactor and suggests additional regulatory requirements, which need to be developed, based on the direction to resolution of the safety concerns. The efforts to identify and technically resolve the safety concerns in the design stage will provide the early confidence of SMART safety and the technical basis to evaluate the safety to designers and reviewers in the future. Suggestion on the development of additional regulatory requirements will contribute for the regulator to taking actions for licensing of an integral reactor. 66 refs., 5 figs., 24 tabs. (Author)

Standard precautions: occupational exposure and behavior of health care workers in Ethiopia.

Directory of Open Access Journals (Sweden)

Ayalu A Reda

2010-12-01

Full Text Available Occupational exposure to blood and body fluids is a serious concern for health care workers, and presents a major risk for the transmission of infections such as HIV and hepatitis viruses. The objective of this study was to investigate occupational exposures and behavior of health care workers (HCWs in eastern Ethiopia.We surveyed 475 HCWs working in 10 hospitals and 20 health centers in eastern Ethiopia using a structured questionnaire with a response rate of 84.4%. Descriptive statistics and multivariate analysis using logistic regression were performed.Life time risks of needle stick (30.5%; 95% CI 26.4-34.6% and sharps injuries (25.7%; 95% CI 21.8-29.6% were high. The one year prevalence of needle stick and sharps injury were 17.5% (95% CI 14.1-20.9% and 13.5% (95% CI 10.4-16.6% respectively. There was a high prevalence of life time (28.8%; 95% CI = 24.7-32.9% and one year (20.2%; 95% CI = 16.6-23.8% exposures to blood and body fluids. Two hundred thirteen (44.8% HCWs reported that they were dissatisfied by the supply of infection prevention materials. HCWs had sub-optimal practices and unfavorable attitudes related to standard precautions such as needle recapping (46.9% and discriminatory attitudes (30.5% toward HIV/AIDS patients.There was a high level of exposure to blood and body fluids among HCWs. We detected suboptimal practices and behavior that put both patients and HCWs at significant risk of acquiring occupational infections. Health authorities in the study area need to improve the training of HCWs and provision of infection prevention equipment. In addition, regular reporting and assessment of occupational exposures need to be implemented.

Disentangling the roles of safety climate and safety culture: Multi-level effects on the relationship between supervisor enforcement and safety compliance.

Science.gov (United States)

Petitta, Laura; Probst, Tahira M; Barbaranelli, Claudio; Ghezzi, Valerio

2017-02-01

Despite increasing attention to contextual effects on the relationship between supervisor enforcement and employee safety compliance, no study has yet explored the conjoint influence exerted simultaneously by organizational safety climate and safety culture. The present study seeks to address this literature shortcoming. We first begin by briefly discussing the theoretical distinctions between safety climate and culture and the rationale for examining these together. Next, using survey data collected from 1342 employees in 32 Italian organizations, we found that employee-level supervisor enforcement, organizational-level safety climate, and autocratic, bureaucratic, and technocratic safety culture dimensions all predicted individual-level safety compliance behaviors. However, the cross-level moderating effect of safety climate was bounded by certain safety culture dimensions, such that safety climate moderated the supervisor enforcement-compliance relationship only under the clan-patronage culture dimension. Additionally, the autocratic and bureaucratic culture dimensions attenuated the relationship between supervisor enforcement and compliance. Finally, when testing the effects of technocratic safety culture and cooperative safety culture, neither safety culture nor climate moderated the relationship between supervisor enforcement and safety compliance. The results suggest a complex relationship between organizational safety culture and safety climate, indicating that organizations with particular safety cultures may be more likely to develop more (or less) positive safety climates. Moreover, employee safety compliance is a function of supervisor safety leadership, as well as the safety climate and safety culture dimensions prevalent within the organization. Copyright © 2016 Elsevier Ltd. All rights reserved.

Safety studies on Korean fusion DEMO plant using integrated safety assessment methodology

International Nuclear Information System (INIS)

Oh, Kyemin; Kang, Myoung-suk; Heo, Gyunyoung; Kim, Hyoung-chan

2014-01-01

Highlights: •The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant. •The concepts of integrated safety assessment methodology (ISAM) that can be applied in addressing regulatory requirements and recognizing safety issues for K-DEMO were emphasized. •Phenomena identification and ranking table (PIRT) was proposed. It can recognize vulnerabilities of systems and identify the gaps in technical areas requiring additional researches. •This work is expected to contribute on the conceptual design of safety features for K-DEMO to design engineers and the guidance for regulatory requirements to licensers. -- Abstract: The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant (K-DEMO) as a part of R and D program through the National Fusion Research Institute of Korea. Even though nuclear regulation and licensing framework is well setup due to the operating and design experience of Pressurized Water Reactors (PWRs) since 1970s, the regulatory authority of South Korea has concerns on the challenge of facing new nuclear facilities including K-DEMO due to the differences in systems, materials, and inherent safety feature from conventional PWRs. Even though the follow-up of the ITER license process facilitates to deal with significant safety issues of fusion facilities, a licensee as well as a licenser should identify the gaps between ITER and DEMO in terms of safety issues. First we reviewed the methods of conducting safety analysis for unprecedented nuclear facilities such as Generation IV reactors, particularly very high temperature reactor (VHTR), which is called as integrated safety assessment methodology (ISAM). Second, the analysis for the conceptual design of K-DEMO on the basis of ISAM was conducted. The ISAM consists of five analytical tools to develop the safety requirements from licensee

Safety studies on Korean fusion DEMO plant using integrated safety assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Oh, Kyemin; Kang, Myoung-suk [Kyung Hee University, Youngin-si, Gyeonggi-do 446-701 (Korea, Republic of); Heo, Gyunyoung, E-mail: gheo@khu.ac.kr [Kyung Hee University, Youngin-si, Gyeonggi-do 446-701 (Korea, Republic of); Kim, Hyoung-chan [National Fusion Research Institute, Daejeon-si 305-333 (Korea, Republic of)

2014-10-15

Highlights: •The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant. •The concepts of integrated safety assessment methodology (ISAM) that can be applied in addressing regulatory requirements and recognizing safety issues for K-DEMO were emphasized. •Phenomena identification and ranking table (PIRT) was proposed. It can recognize vulnerabilities of systems and identify the gaps in technical areas requiring additional researches. •This work is expected to contribute on the conceptual design of safety features for K-DEMO to design engineers and the guidance for regulatory requirements to licensers. -- Abstract: The purpose of this paper is to suggest methodology that can investigate safety issues and provides a case study for Korean fusion DEMO plant (K-DEMO) as a part of R and D program through the National Fusion Research Institute of Korea. Even though nuclear regulation and licensing framework is well setup due to the operating and design experience of Pressurized Water Reactors (PWRs) since 1970s, the regulatory authority of South Korea has concerns on the challenge of facing new nuclear facilities including K-DEMO due to the differences in systems, materials, and inherent safety feature from conventional PWRs. Even though the follow-up of the ITER license process facilitates to deal with significant safety issues of fusion facilities, a licensee as well as a licenser should identify the gaps between ITER and DEMO in terms of safety issues. First we reviewed the methods of conducting safety analysis for unprecedented nuclear facilities such as Generation IV reactors, particularly very high temperature reactor (VHTR), which is called as integrated safety assessment methodology (ISAM). Second, the analysis for the conceptual design of K-DEMO on the basis of ISAM was conducted. The ISAM consists of five analytical tools to develop the safety requirements from licensee

Stressing the Need for Safety in Technical Education

Science.gov (United States)

Defore, Jesse j.

1974-01-01

Discusses the importance of a safety orientation program in technical education and major components of a safety-conscious working enviroment. Suggests every institution take such measures as appointment of a safety officer, maintenance of a safety posture, inclusion of safety in curricula, and application of good safety practices. (CC)

Compliance with infection control standard precautions guidelines: a survey among dental healthcare workers in Hail Region, Saudi Arabia.

Science.gov (United States)

Haridi, Hassan Kasim; Al-Ammar, Abdalmohsen Saud; Al-Mansour, Moazzy Ibraheim

2016-11-01

The concept of standard precautions (SP) has been a cornerstone of dental infection control (IC) practice. Full adherence with SP guidelines is still a matter of concern in many institutions. The objectives of the present study were to assess and characterise compliance with SP guidelines among dental healthcare workers (DHCWs) and to analyse factors that affect compliance. A regional cross-sectional questionnaire survey among DHCWs in all health facilities was carried out from August to November 2014. A total of 307 returned valid self-report questionnaires with a response rate of 73.1%. Most participants (86.3%) were aware of the SP guidelines, 84.4% received IC training and 88.9% received hepatitis B vaccination. Compliance with SP was found to be high; the majority (90.1%) attained 75% on the compliance scale. In the multivariate logistic regression model, perceived higher institutional commitment as regard IC requirements (odds ratio [OR], 4.34; P guidelines. Institutional factors appear to have an important role. Attention should be paid to dental assistants and private DHCWs.

Safety advice sheets

CERN Multimedia

HSE Unit

2013-01-01

You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

[Knowledge and adherence to bio-safety measures and biological accidents by nursing students during their clinical practice].

Science.gov (United States)

Merino-de la Hoz, Felicitas; Durá-Ros, María Jesús; Rodríguez-Martín, Elías; González-Gómez, Silvia; Mariano López-López, Luis; Abajas-Bustillo, Rebeca; de la Horra-Gutiérrez, Inmaculada

2010-01-01

To identify the degree of knowledge and performance of bio-safety measures by nursing students and knowing the type of biological accidents suffered during their clinical practice. A cross-sectional study was conducted on the students of three Nursing courses held in May of 2008. Data was collected by an anonymous self-administered questionnaire, with a return of 54%. A total of 97% of students seemed to know the standard biosafety measures, and all of them (100%) stated that those measures must be applied to every patient. However, the reality of clinical practice shows that biosafety measures are only partially applied. An average of 60.2% implement the personal hygiene measures, 66.1% use physical barriers, and 44% use sharp materials safely. Around 32.25% of the students have suffered some biological accident, with a greater incidence in the second year: administering injections (24%), drawing blood samples with Venojet needles (18%) and recapping used needles (17%). The high level of knowledge shown by the students on standard precautions is not always shown in clinical practice. There are significant deficiencies in student safety practices: recapping of used needles continues to be one of the most common risk practices carried out. Copyright (c) 2009 Elsevier España, S.L. All rights reserved.

Applications of electricity and corrosion. Precautions for use of metals and stainless and refractory alloys

International Nuclear Information System (INIS)

Gras, J.M.

1993-09-01

The development of applications of electricity poses highly diversified problems with materials where the resistance to corrosion prevails. Corrosion occurs under various conditions, which sometimes look harmless, and it covers diverse phenomenons linked to the nature of materials and to the physical and chemical context. However, in spite of the diversity of the processes used (electrical boilers, mechanical steam compression, heat pumps, Joule effect,) the knowledge required to approach the corrosion problems corresponds to a limited number of generic situations with regard not only to the phenomenons proper (general corrosion of copper, pitting and stress corrosion cracking of stainless steels, refractory alloys oxidation,) but also to chemical conditions which favour the corrosion (natural waters, acidic condensates, hot gases). This report is a short guide to anti-corrosion. With the aid of questions asked during the past few years, it aims to provide engineers in charge of the development of applications of electricity with a few recommendations upon the precautions for use of metallic materials. We analyze in turn the problems met with wet air and drying mists, chloride-containing neutral waters, alkaline waters and caustic media, acidic waters and concentrated acids, and, last, hot gases. We lay stress upon the behaviour of materials deemed to withstand corrosion under aqueous conditions (stainless steels and alloys, copper,titanium) and corrosion at high temperatures (refractory alloys). (author). 11 figs., 43 refs., 11 tabs

Radiation (Safety Control) Ordinance 1978

International Nuclear Information System (INIS)

1978-01-01

This Ordinance provides for the control, regulation, possession, use and transport of radioactive substance and irradiating apparatus. The Director of Health is responsible for administration of the Ordinance, which contains detailed provisions concerning the terms and conditions of licences, duties of licensees, medical examinations, maximum radiation doses, precautions to be taken to avoid exceeding such doses. The Ordinance also lays down a system of record-keeping and registration as well as packaging specifications for the transport of radioactive substances. (NEA) [fr

Measuring Safety Culture on Ships Using Safety Climate: A Study among Indian Officers

Directory of Open Access Journals (Sweden)

Yogendra Bhattacharya

2015-12-01

Full Text Available Workplace safety continues to be an area of concern in the maritime industry due to the international nature of the operations. The effectiveness of extensive legislation to manage shipboard safety remains in doubt. The focus must therefore shift towards the human element - seafarers and their perceptions of safety. The study aims to understand the alignment that exists between safety culture and safety climate on board ships as perceived by seafarers. The underlying factors of safety climate were identified using factor analysis which isolated seven factors - Support on Safety, Organizational Support, Resource Availability, Work Environment, Job Demands, ‘Just’ Culture, and Safety Compliance. The perception of safety level of seafarers was found to be low indicating the existence of misalignments between safety culture values and the actual safety climate. The study also reveals that the safety perceptions of officers employed directly by ship owners and those by managers do not differ significantly, nor do they differ between senior and junior officers. A shift in perspective towards how seafarers themselves feel towards safety might provide more effective solutions – instead of relying on regulations - and indeed aid in reducing incidents on board. This paper details practical suggestions on how to identify the factors that contribute towards a better safety climate on board ships.

Design for safety: theoretical framework of the safety aspect of BIM system to determine the safety index

Directory of Open Access Journals (Sweden)

Ai Lin Evelyn Teo

2016-12-01

Full Text Available Despite the safety improvement drive that has been implemented in the construction industry in Singapore for many years, the industry continues to report the highest number of workplace fatalities, compared to other industries. The purpose of this paper is to discuss the theoretical framework of the safety aspect of a proposed BIM System to determine a Safety Index. An online questionnaire survey was conducted to ascertain the current workplace safety and health situation in the construction industry and explore how BIM can be used to improve safety performance in the industry. A safety hazard library was developed based on the main contributors to fatal accidents in the construction industry, determined from the formal records and existing literature, and a series of discussions with representatives from the Workplace Safety and Health Institute (WSH Institute in Singapore. The results from the survey suggested that the majority of the firms have implemented the necessary policies, programmes and procedures on Workplace Safety and Health (WSH practices. However, BIM is still not widely applied or explored beyond the mandatory requirement that building plans should be submitted to the authorities for approval in BIM format. This paper presents a discussion of the safety aspect of the Intelligent Productivity and Safety System (IPASS developed in the study. IPASS is an intelligent system incorporating the buildable design concept, theory on the detection, prevention and control of hazards, and the Construction Safety Audit Scoring System (ConSASS. The system is based on the premise that safety should be considered at the design stage, and BIM can be an effective tool to facilitate the efforts to enhance safety performance. IPASS allows users to analyse and monitor key aspects of the safety performance of the project before the project starts and as the project progresses.

Taking ownership of safety. What are the active ingredients of safety coaching and how do they impact safety outcomes in critical offshore working environments?

Science.gov (United States)

Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan

2015-01-01

Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.

Hanford surplus facilities hazards identification document

International Nuclear Information System (INIS)

Egge, R.G.

1997-01-01

This document provides general safety information needed by personnel who enter and work in surplus facilities managed by Bechtel Hanford, Inc. The purpose of the document is to enhance access control of surplus facilities, educate personnel on the potential hazards associated with these facilities prior to entry, and ensure that safety precautions are taken while in the facility

Recent innovations in IFR safety research

International Nuclear Information System (INIS)

Wade, D.C.

1994-01-01

Recent progress in IFR safety research suggests potential for two extensions of passive features to improve the robustness of safety response. This report provides a discussion of these recent innovations

29 CFR 1910.183 - Helicopters.

Science.gov (United States)

2010-07-01

... objects. The employer shall take all necessary precautions to protect employees from flying objects in the... safety. The size and weight of loads, and the manner in which loads are connected to the helicopter shall...

Safety indicators as a tool for operational safety evaluation of nuclear power plants

International Nuclear Information System (INIS)

Araujo, Jefferson Borges; Melo, Paulo Fernando Ferreira Frutuoso e; Schirru, Roberto

2009-01-01

Performance indicators have found a wide use in the conventional and nuclear industries. For the conventional industry, the goal is to optimize production, reducing loss of time with accidents, human error and equipment downtimes. In the nuclear industry, nuclear safety is an additional goal. This paper presents a general methodology to the establishment, selection and use of safety indicators for a two loop PWR plant, as Angra 1. The use of performance indicators is not new. The NRC has its own methodology and the IAEA presents methodology suggestions, but there is no detailed documentation about indicators selection, criteria and bases used. Additionally, only the NRC methodology performs a limited integrated evaluation. The study performed identifies areas considered critical for the plant operational safety. For each of these areas, strategic sub-areas are defined. For each strategic sub-area, specific safety indicators are defined. These proposed Safety Indicators are based on the contribution to risk considering a quantitative risk analysis. For each safety indicator, a goal, a bounded interval and proper bases are developed, to allow for a clear and comprehensive individual behavior evaluation. On the establishment of the intervals and boundaries, a probabilistic safety study, operational experience, international and national standards and technical specifications were used. Additionally, an integrated evaluation of the indicators, using expert systems, was done to obtain an overview of the plant general safety. This evaluation uses well-defined and clear rules and weights for each indicator to be considered. These rules were implemented by means of a computational language, on a friendly interface, so that it is possible to obtain a quick response about operational safety. This methodology can be used to identify situations where the plant safety is challenged, by giving a general overview of the plant operational condition. Additionally, this study can

Thinking of the safety assessment of HLW disposal

International Nuclear Information System (INIS)

Li Honghui; Zhao Shuaiwei; Liu Jianqin; Liu Wei; Wan Lei; Yang Zhongtian; An Hongxiang; Sun Qinghong

2014-01-01

The function and the research methods of safety assessment are discussed. Two methods about safety assessment and the requirement of safety assessment are introduced. The key parameters and influence factors in nuclide transport of safety assessment are specialized. The works will be done on safety assessment is discussed which will give some suggests for the development of safety assessment. (authors)

Nuclear power safety economics

International Nuclear Information System (INIS)

Legasov, V.A.; Demin, V.F.; Shevelev, Ya.V.

1984-01-01

The existing conceptual and methodical basis for the decision-making process insuring safety of the nuclear power and other (industrial and non-industrial) human activities is critically analyzed. Necessity of development a generalized economic safety analysis method (GESAM) is shown. Its purpose is justifying safety measures. Problems of GESAM development are considered including the problem of costing human risk. A number of suggestions on solving them are given. Using the discounting procedure in the assessment of risk or detriment caused by harmful impact on human health is substantiated. Examples of analyzing some safety systems in the nuclear power and other spheres of human activity are given

Stepping Up Occupational Safety and Health Through Employee Participation.

Science.gov (United States)

Vaughan, Gary R.

1986-01-01

The effectiveness of the Occupational Safety and Health Act of 1970 is examined, and it is suggested that employee participation could help improve occupational safety and health in the future, through safety committees, safety circles, safety teams, and individual participation. (MSE)

Healthful School Living: Environmental Health in the School.

Science.gov (United States)

Rowe, Daryl E.

1987-01-01

Environmental health, as it relates to schools, is defined. Site, chemical, biological, and physical health hazards are identified. Recommendations and precautions to help achieve optimal health, safety, and comfort are presented. Resources are noted. (Author/MT)

The operator's role and safety functions

International Nuclear Information System (INIS)

Corcoran, W.R.; Finnicum, D.J.; Hubbard, F.R.; Musick, C.R.; Walzer, R.F.

1980-01-01

A nuclear power plant can be thought of as a single system with two major subsystems: equipment and people. Both play important roles in nuclear safety. Whereas, in the past, the role of equipment had been emphasized in nuclear safety, the accident at Three Mile Island and its subsequent investigations point out the vital role of the operator. This paper outlines the operator's roles in nuclear safety and suggests how the concept of safety functions can be used to reduce economic losses and increase safety margins. (auth)

Development of Safety Culture Assessment Strategy for Korean NPP

International Nuclear Information System (INIS)

Park, Jung Hwan; Kim, Jong Hyun

2014-01-01

This paper aims at developing the requirements for a method to evaluate the operational safety culture, evaluating currently available methods based on the requirements, and suggesting a method to evaluate and improve the operational safety culture for Korean nuclear power plants. This paper reviews the widely-used methods to assess safety culture for NPPs and their basis. Then, this paper develops the requirements for the method to evaluate operational safety culture for Korean NPPs. Based on these requirements, Korean Safety Culture Indicators (KSCI) and evaluation measures are also suggested. Finally this paper proposes the guidelines to develop improvements to safety culture from the evaluation results

Development of Safety Culture Assessment Strategy for Korean NPP

Energy Technology Data Exchange (ETDEWEB)

Park, Jung Hwan; Kim, Jong Hyun [KEPCO, Ulsan (Korea, Republic of)

2014-08-15

This paper aims at developing the requirements for a method to evaluate the operational safety culture, evaluating currently available methods based on the requirements, and suggesting a method to evaluate and improve the operational safety culture for Korean nuclear power plants. This paper reviews the widely-used methods to assess safety culture for NPPs and their basis. Then, this paper develops the requirements for the method to evaluate operational safety culture for Korean NPPs. Based on these requirements, Korean Safety Culture Indicators (KSCI) and evaluation measures are also suggested. Finally this paper proposes the guidelines to develop improvements to safety culture from the evaluation results.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

Directory of Open Access Journals (Sweden)

Yuzhong Shen

2017-01-01

Full Text Available Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation and distal contextual factors (leadership and safety climate. However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX, and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites.

Science.gov (United States)

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J

2017-01-05

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader-member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

Science.gov (United States)

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J.

2017-01-01

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job. PMID:28067775

Hacking the lights out. The computer virus threat to the electrical grid; Angriff auf das Stromnetz

Energy Technology Data Exchange (ETDEWEB)

Nicol, David M. [Illinois Univ., Urbana-Champaign, IL (United States). Dept. of Electrical and Computer Engineering

2011-10-15

The Stuxnet virus which had penetrated in secured facilities to enrich uranium in Iran by June 2007 has made clear that a virus that was developed by experts for industrial automation may cause a large damage in a technical infrastructure. Our electricity network consists of a variety of networks whose components are monitored and controlled by computers or programmable logic controllers. This is a potential target of an attack for computers. Simulations suggest that a sophisticated attack can paralyze a large portion of the electricity networks. With this in mind the safety precautions are being greatly increased.

International policy and advisory response regarding children's exposure to radio frequency electromagnetic fields (RF-EMF).

Science.gov (United States)

Redmayne, Mary

2016-01-01

Radiofrequency electromagnetic field (RF-EMF) exposure regulations/guidelines generally only consider acute effects, and not chronic, low exposures. Concerns for children's exposure are warranted due to the amazingly rapid uptake of many wireless devices by increasingly younger children. This review of policy and advice regarding children's RF-EMF exposure draws material from a wide variety of sources focusing on the current situation. This is not a systematic review, but aims to provide a representative cross-section of policy and advisory responses within set boundaries. There are a wide variety of approaches which I have categorized and tabulated ranging from ICNIRP/IEEE guidelines and "no extra precautions needed" to precautionary or scientific much lower maxima and extensive advice to minimize RF-EMF exposure, ban advertising/sale to children, and add exposure information to packaging. Precautionary standards use what I term an exclusion principle. The wide range of policy approaches can be confusing for parents/carers of children. Some consensus among advisory organizations would be helpful acknowledging that, despite extensive research, the highly complex nature of both RF-EMF and the human body, and frequent technological updates, means simple assurance of long-term safety cannot be guaranteed. Therefore, minimum exposure of children to RF-EMF is recommended. This does not indicate need for alarm, but mirrors routine health-and-safety precautions. Simple steps are suggested. ICNIRP guidelines need to urgently publish how the head, torso, and limbs' exposure limits were calculated and what safety margin was applied since this exposure, especially to the abdomen, is now dominant in many children.

164 original article profile of institutional infrastructure

African Journals Online (AJOL)

Dr Oboro VO

At this level is the most critical health services delivery point, with an ... Methods: The objectives of this study were to assess the universal precaution profile of primary health care .... Availability of safety training and monitoring schedule.

In-depth Analysis of Pattern of Occupational Injuries and Utilization of Safety Measures among Workers of Railway Wagon Repair Workshop in Jhansi (U.P.).

Science.gov (United States)

Gupta, Shubhanshu; Malhotra, Anil K; Verma, Santosh K; Yadav, Rashmi

2017-01-01

Occupational injuries constitute a global health challenge, yet they receive comparatively modest scientific attention. Pattern of occupational injuries and its safety precautions among wagon repair workers is an important health issue, especially in developing countries like India. To assess the pattern of occupational injuries and utilization of safety measures among railway wagon repair workshop workers in Jhansi (U.P.). Railway wagon repair workshop urban area, Jhansi (U.P). Occupation-based cross-sectional study. A cross-sectional study was conducted among 309 workers of railway workshop in Jhansi (U.P.) who were all injured during the study period of 1 year from July 2015 to June 2016. Baseline characteristics, pattern of occupational injuries, safety measures, and their availability to and utilization by the participants were assessed using a pretested structured questionnaire. Data obtained were collected and analyzed statistically by simple proportions and Chi-square test. The majority of studied workers aged between 38 and 47 years ( n = 93, 30.6%) followed by 28-37 years ( n = 79, 26%). Among the pattern of occupational injuries, laceration (28.7%) was most common followed by abrasion/scratch (21%). Safety shoes and hat were utilized 100% by all workers. Many of them had more than 5 years of experience ( n = 237, 78%). Age group, education level, and utilization of safety measures were significantly associated with pattern of occupational injuries in univariate analysis ( P safety measures is low among workers on railway wagon repair workshop, which highlights the importance of strengthening safety regulatory services toward this group of workers. Younger age group workers show a significant association with open wounds and surface wounds. As the education level of workers increases, the incidence of injuries decreases. Apart from shoes, hat, and gloves, regular utilization of other personal protective equipment was not seen.

Industrial radiography

International Nuclear Information System (INIS)

1994-01-01

This Health and Safety Executive Information Sheet on industrial radiography aims to inform directors and managers of industrial radiography companies on the safety precautions necessary to ensure that their personnel do not exceed dose guidelines for exposure to ionizing radiation. The Ionising Radiations Regulations 1985 (IRR85) require that exposure doses for radiographers are kept as low reasonably practicable. Equipment maintenance, and the employment of proper emergency procedures will help to ensure personnel safety. (UK)

Comparing safety climate in naval aviation and hospitals: implications for improving patient safety.

Science.gov (United States)

Singer, Sara J; Rosen, Amy; Zhao, Shibei; Ciavarelli, Anthony P; Gaba, David M

2010-01-01

Evidence of variation in safety climate suggests the need for improvement among at least some hospitals. However, comparisons only among hospitals may underestimate the improvement required. Comparison of hospitals with analogous industries may provide a broader perspective on the safety status of our nation's hospitals. The purpose of this study was to compare safety climate among hospital workers with personnel from naval aviation, an organization that operates with high reliability despite intrinsically hazardous conditions. We surveyed a random sample of health care workers in 67 U.S. hospitals and, for generalizability, 30 veterans affairs hospitals using questions comparable with those posed at approximately the same time (2007) to a census of personnel from 35 squadrons of U.S. naval aviators. We received 13,841 (41%) completed surveys in U.S. hospitals, 5,511 (50%) in veterans affairs hospitals, and 14,854 (82%) among naval aviators. We examined differences in respondents' perceptions of safety climate at their institution overall and for 16 individual items. Safety climate was three times better on average among naval aviators than among hospital personnel. Naval aviators perceived a safer climate (up to seven times safer) than hospital personnel with respect to each of the 16 survey items. Compared with hospital managers, naval commanders perceived climate more like frontline personnel did. When contrasting naval aviators with hospital personnel working in comparably hazardous areas, safety climate discrepancies increased rather than decreased. One individual hospital performed as well as naval aviation on average, and at least one hospital outperformed the Navy benchmark for all but three individual survey items. Results suggest that hospitals have not sufficiently created a uniform priority of safety. However, if each hospital performed as well as the top-performing hospital in each area measured, hospitals could achieve safety climate levels comparable

IAEA safety glossary. Terminology used in nuclear safety and radiation protection. 2007 ed

International Nuclear Information System (INIS)

2007-01-01

legislation, should be aware that the terms included have been chosen and the definitions and explanations given have been drafted for the purpose mentioned above. Terminology and usage may differ in other contexts, such as in binding international legal instruments and in the publications of other organizations. It is recognized that the Safety Glossary will be of wider interest, and it is therefore now issued as an IAEA publication. It is intended to issue a CD-ROM that will include this Safety Glossary (2007 Edition) and versions of the publication in the other five official languages of the IAEA: Arabic, Chinese, French, Russian and Spanish. These other five versions will also be made available for downloading from the Safety Glossary web site. It is intended to revise and update the Safety Glossary periodically in the light of changes in terminology and usage in the safety standards due to developments in technology and changes in regulatory approaches in Member States. The IAEA Secretariat invites the submission of feedback concerning the definitions of technical terms and the explanations of their usage given in the Safety Glossary from users of the IAEA safety standards (in English and in translation) and other safety related publications. A change form is provided on the Safety Glossary web site - http://www-ns.iaea.org/standards/safetyglossary.htm - for the submission of information or suggestions for consideration in a revision of the Safety Glossary. The first version of the Safety Glossary was compiled and issued in 2000. The Safety Glossary, 2007 Edition, is a revised and updated version. In revising the Safety Glossary, account has been taken of safety standards issued since 2000 and of the comments and suggestions submitted in the revision process and in the course of its translation

IAEA safety glossary. Terminology used in nuclear safety and radiation protection. 2007 ed

International Nuclear Information System (INIS)

2007-06-01

legislation, should be aware that the terms included have been chosen and the definitions and explanations given have been drafted for the purpose mentioned above. Terminology and usage may differ in other contexts, such as in binding international legal instruments and in the publications of other organizations. It is recognized that the Safety Glossary will be of wider interest, and it is therefore now issued as an IAEA publication. It is intended to issue a CD-ROM that will include this Safety Glossary (2007 Edition) and versions of the publication in the other five official languages of the IAEA: Arabic, Chinese, French, Russian and Spanish. These other five versions will also be made available for downloading from the Safety Glossary web site. It is intended to revise and update the Safety Glossary periodically in the light of changes in terminology and usage in the safety standards due to developments in technology and changes in regulatory approaches in Member States. The IAEA Secretariat invites the submission of feedback concerning the definitions of technical terms and the explanations of their usage given in the Safety Glossary from users of the IAEA safety standards (in English and in translation) and other safety related publications. A change form is provided on the Safety Glossary web site - http://www-ns.iaea.org/standards/safetyglossary.htm - for the submission of information or suggestions for consideration in a revision of the Safety Glossary. The first version of the Safety Glossary was compiled and issued in 2000. The Safety Glossary, 2007 Edition, is a revised and updated version. In revising the Safety Glossary, account has been taken of safety standards issued since 2000 and of the comments and suggestions submitted in the revision process and in the course of its translation

IAEA safety glossary. Terminology used in nuclear safety and radiation protection. 2007 ed

International Nuclear Information System (INIS)

2007-01-01

legislation, should be aware that the terms included have been chosen and the definitions and explanations given have been drafted for the purpose mentioned above. Terminology and usage may differ in other contexts, such as in binding international legal instruments and in the publications of other organizations. It is recognized that the Safety Glossary will be of wider interest, and it is therefore now issued as an IAEA publication. It is intended to issue a CD-ROM that will include this Safety Glossary (2007 Edition) and versions of the publication in the other five official languages of the IAEA: Arabic, Chinese, French, Russian and Spanish. These other five versions will also be made available for downloading from the Safety Glossary web site. It is intended to revise and update the Safety Glossary periodically in the light of changes in terminology and usage in the safety standards due to developments in technology and changes in regulatory approaches in Member States. The IAEA Secretariat invites the submission of feedback concerning the definitions of technical terms and the explanations of their usage given in the Safety Glossary from users of the IAEA safety standards (in English and in translation) and other safety related publications. A change form is provided on the Safety Glossary web site - http://www-ns.iaea.org/standards/safetyglossary.htm - for the submission of information or suggestions for consideration in a revision of the Safety Glossary. The first version of the Safety Glossary was compiled and issued in 2000. The Safety Glossary, 2007 Edition, is a revised and updated version. In revising the Safety Glossary, account has been taken of safety standards issued since 2000 and of the comments and suggestions submitted in the revision process and in the course of its translation

Seeking a safety culture

International Nuclear Information System (INIS)

Lee, T.

1993-01-01

Human organisational failure has been shown to play a significant role in major accidents world-wide in both the nuclear and non-nuclear industries. A recent report called Organising for Safety, published by The Health and Safety Commission, suggests that the nuclear industry should give organisational factors the same emphasis as it does the reduction of equipment failures and individual error. (Author)

Risk communication activities toward nuclear safety in Tokai: your safety is our safety

International Nuclear Information System (INIS)

Tsuchiya, T.

2007-01-01

As several decades have passed since the construction of nuclear power plants began, residents have become gradually less interested in nuclear safety. The Tokai criticality accident in 1909, however, had roused residents in Tokai-Mura to realize that they live with nuclear technology risks. To prepare a field of risk communication, the Tokai-Mura C 3 project began as a pilot research project supported by NISA. Alter the project ended, we are continuing risk. communication activities as a non-profit organisation. The most important activity of C 3 project is the citizen's inspection programme for nuclear related facilities. This programme was decided by participants who voluntarily applied to the project. The concept of the citizen's inspection programme is 'not the usual facility tours'. Participants are involved from the planning stage and continue to communicate with workers of the inspected nuclear facility. Since 2003, we have conducted six programmes for five nuclear related organisations. Participants evaluated that radiation protection measures were near good but there were some problems concerning the worker's safety and safety culture, and proposed a mixture of advice based on personal experience. Some advice was accepted and it did improve the facility's safety measures. Other suggestions were not agreed upon by nuclear organisations. The reason lies in the difference of concept between the nuclear expert's 'safety' and the citizen's 'safety'. Residents do not worry about radiation only, but also about the facility's safety as a whole including the worker's safety. They say, 'If the workers are not safe, you also are unable to protect us'. Although the disagreement remained, the participants and the nuclear industry learned much about each other. Participating citizens received a substantial amount of knowledge about the nuclear industry and its safety measures, and feel the credibility and openness of the nuclear industry. On the other hand, the nuclear

Crying in infancy

Science.gov (United States)

... your child. As long as caregivers are taking safety precautions and comforting the baby when necessary, you may be sure that your child is well cared for during your break. Call your provider immediately if your baby's crying ...

Radiation safety and protection of close contacts from radiators after implantation of radioactive 125I seeds

International Nuclear Information System (INIS)

Sui Aixia; Li Jianmin; Tang Fulong; Zhang Hongtao; Ren Ju'na; Pang Linbin; Xia Haishui; Gao Zhen; Wu Lili; Wang Juan

2012-01-01

Objective: To study the effective dose and precaution time of the irradiation of the close contact from the radiators who underwent implantation of radioactive 125 I seeds so as to guide scientifically people how to avoid radiation damage. Methods: Twenty patients with different types of cancer underwent implantation of radioactive 125 I seeds with the median value of implantation depth of 2.16 cm. Within 24 h after the operations the dose rates 30 cm and 100 cm from the skin were measured with pocket-size radiometer so as to imitate the situations of the close contacts. The effective doses and precaution times of different persons were calculated according to relevant formula. Results: The dose rate a person received at the same time points (1, 54, 78, and 109 d, respectively) decreased along with the increase of the distance from the skin (t=5.962, 5.961, 5.961, 5.962, P<0.05), and the dose rate a person received at the same distance from the skin decreased along with the extension of time (30 cm: t=6.236, 6.236, 6.235, P<0.05; 100 cm: t=7.310, 7.315, 7.314, P<0.05). At different time points, the dose rates at 30 cm distance point were all significant higher than those at the 100 cm point (P <0.05). The adult living together, minors and pregnant women sharing the room, colleagues,adults who slept together with the patients began to reach the 50% dose constraint values 0, 54, 78 and 109 days after the operation. Conclusions: After their precaution time, it's safe to contact with the patients for the groups; otherwise, it's necessary to take some protect works within the precaution time. (authors)

Defining safety culture and the nexus between safety goals and safety culture. 1. An Investigation Study on Practical Points of Safety Management

International Nuclear Information System (INIS)

Hasegawa, Naoko; Takano, Kenichi; Hirose, Ayako

2001-01-01

In a report after the Chernobyl accident, the International Atomic Energy Agency indicated the definition and the importance of safety culture and the ideal organizational state where safety culture pervades. However, the report did not mention practical approaches to enhance safety culture. In Japan, although there had been investigations that clarified the consciousness of employees and the organizational climate in the nuclear power and railway industries, organizational factors that clarified the level of organization safety and practical methods that spread safety culture in an organization had not been studied. The Central Research Institute of the Electric Power Industry conducted surveys of organizational culture for the construction, chemical, and manufacturing industries. The aim of our study was to clarify the organizational factors that influence safety in an organization expressed in employee safety consciousness, commitment to safety activities, rate of accidents, etc. If these areas were clarified, the level of organization safety might be evaluated, and practical ways could be suggested to enhance the safety culture. Consequently, a series of investigations was conducted to clarify relationships among organizational climate, employee consciousness, safety management and activities, and rate of accidents. The questionnaire surveys were conducted in 1998-1999. The subjects were (a) managers of the safety management sections in the head offices of the construction, chemical, and manufacturing industries; (b) responsible persons in factories of the chemical and manufacturing industries; and (c) general workers in factories of the chemical and manufacturing industries. The number of collected data was (a) managers in the head office: 48 from the construction industry and 58 from the chemical and manufacturing industries, (b) responsible persons in factories: 567, and (c) general workers: from 29 factories. Items in the questionnaires were selected from

Safety evaluation of some wild plants in the New Nordic Diet

DEFF Research Database (Denmark)

Mithril, Charlotte; Dragsted, Lars Ove

2012-01-01

plants the majority of the bioactive components reported were within the range experienced when eating or drinking typical food stuffs. For most compounds the hazards could be evaluated as minor. The only precaution found was for common lambsquarters because of its presumed high level of oxalic acid...

Oxygen - Precautions to be taken in the preparation of plant and equipment

International Nuclear Information System (INIS)

1978-01-01

The inadequate maintenance and cleanness of equipment for use with oxygen under pressure is a frequent cause of spontaneous combustion in valves and fittings. Such accidents are always serious and frequently result in loss of life. This study by the Working Party 'Safety-Oxygen' of the Steel Industry Safety and Health Commission provides the most up-to-date information on this hazard and puts forward a draft specification for firms in the steel industry (or others using oxygen gas under pressure) and engineering consultants. The aim being to make manufacturers of the equipment and assembly firms comply with the conditions laid down

OSHA and Experimental Safety Design.

Science.gov (United States)

Sichak, Stephen, Jr.

1983-01-01

Suggests that a governmental agency, most likely Occupational Safety and Health Administration (OSHA) be considered in the safety design stage of any experiment. Focusing on OSHA's role, discusses such topics as occupational health hazards of toxic chemicals in laboratories, occupational exposure to benzene, and role/regulations of other agencies.…

75 FR 58281 - National Farm Safety and Health Week, 2010

Science.gov (United States)

2010-09-23

... Every day, the lives of Americans are touched by the hard work and dedication of our Nation's farmers... producers are stewards of our natural resources and precious open spaces, and they are playing a key role in... work, those in the agriculture sector must take special precautions in their daily tasks. Despite the...

Kadav Moun PSA (:60) (Human Remains)

Centers for Disease Control (CDC) Podcasts

2010-02-18

This is an important public health announcement about safety precautions for those handling human remains. Language: Haitian Creole.  Created: 2/18/2010 by Centers for Disease Control and Prevention (CDC).   Date Released: 2/18/2010.

The evaluation of the dust-related occupational respiratory disorders of dental laboratory technicians working in Denizli Province

Directory of Open Access Journals (Sweden)

Belkis Yurdasal

2015-01-01

DISCUSSION: Technicians′ use of personal protective tools is not enough and ratio of smoking is rather high. Pneumoconiosis cases clearly show this exposure. It is necessary to adopt comprehensive work health and safety precautions considering the determined risk factors.

Evoked Cultural Forms

Science.gov (United States)

2013-12-01

identifying particular cues of potential danger,  suggesting appropriate precautions  after precautions are taken, providing people with a sense of...and Non-White. The Non-White sample is varied and includes Zulu , Sotho, Xhoza, Indians and others. There was found a significant difference between

The material concept in German light water reactors. Contribution to plant safety economic efficiency and failure provision; Das Werkstoffkonzept in deutschen Leichtwasserreaktoren. Beitrag zur Anlagensicherheit, Wirtschaftlichkeit und Schadensvorsorge

Energy Technology Data Exchange (ETDEWEB)

Ilg, Ulf [EnBW Kernkraft GmbH (Germany). Kernkraftwerk Philippsburg; Koenig, Guenter [EnBW Kernkraft GmbH (Germany). Kernkraftwerk Neckarwestheim; Erve, Manfred [AREVA NP GmbH, Erlangen (Germany)

2008-07-01

In the design and construction stage of nuclear power plants relevant decisions may affect the service life of a component, and thus influence safety and availability of the plant. The German ''basic safety concept'' has an important effect on the quality of the BOL (begin of life) status. Materials selection and qualification are of significant importance for the component lifetime and the profitability of the plant. Examples for the implementation of this concept are demonstrated for the steam generator tubing material Incoloy 800, the inside-plated ferritic compound tubes as control rod drive mechanism nozzle through the RPV head of BWR plants that are not susceptible for corrosion enhanced cracking that was observed for Inconel 600 tubing. A fundamental failure analysis of crack formation in Ti stabilized austenitic pipes of BWR plants found since 1993 were definitely identified as intergranular stress corrosion caused by a local sensitization of the welding process induced overheated structured in the heat affected zone. This allowed target-oriented mitigation measures. The safety culture implemented in German nuclear plants in connection with the break preclusion or integrity concept, respectively, including a continuous actualization with respect to the state-of-the art are the technical prerequisites for damage precaution and possible life time extension.

FOOD SAFETY CONTROL SYSTEM IN CHINA

Institute of Scientific and Technical Information of China (English)

Liu Wei-jun; Wei Yi-min; Han Jun; Luo Dan; Pan Jia-rong

2007-01-01

Most countries have expended much effort to develop food safety control systems to ensure safe food supplies within their borders. China, as one of the world's largest food producers and consumers,pays a lot of attention to food safety issues. In recent years, China has taken actions and implemented a series of plans in respect to food safety. Food safety control systems including regulatory, supervisory,and science and technology systems, have begun to be established in China. Using, as a base, an analysis of the current Chinese food safety control system as measured against international standards, this paper discusses the need for China to standardize its food safety control system. We then suggest some policies and measures to improve the Chinese food safety control system.

Safety program considerations for space nuclear reactor systems

International Nuclear Information System (INIS)

Cropp, L.O.

1984-08-01

This report discusses the necessity for in-depth safety program planning for space nuclear reactor systems. The objectives of the safety program and a proposed task structure is presented for meeting those objectives. A proposed working relationship between the design and independent safety groups is suggested. Examples of safety-related design philosophies are given

Relationship Between Perceived Risk of Falling and Adoption of Precautions to Reduce Fall Risk.

Science.gov (United States)

Blalock, Susan J; Gildner, Paula L; Jones, Jennifer L; Bowling, James M; Casteel, Carri H

2016-06-01

To better understand the relationship between perceived risk of falling and awareness and adoption of four specific precautions that older adults have taken to reduce this risk. Cross-sectional. Data were collected in in-person interviews conducted in the homes of study participants. Interviews conducted between March 2011 and September 2013 and lasted an average of 60-90 minutes. A stratified sampling strategy designed to enroll an equal number of homebound and nonhomebound participants was used. All participants (N = 164) were recruited from central North Carolina. Participants were asked about 1-year fall history, perceived risk of falling, restriction of activities because of fear of falling, awareness of four recommended fall prevention behaviors (exercise, annual medication review, bathroom grab bars, safe footwear), and current practice of these behaviors. In bivariate analyses, individuals who were aware of two behaviors recommended to reduce the risk of falling (exercise, use of safe footwear) and had adopted these behaviors perceived their risk of falling as lower than individuals who were aware of the recommended behaviors but had not adopted them. Moreover, in multivariate analyses, individuals who did not know that exercise is recommended to reduce the risk of falling perceived their risk of falling as lower than those who were aware of this recommendation and had adopted it. Individuals were least likely to be aware that medication reviews and exercise are recommended to reduce fall risk. Awareness of behaviors recommended to reduce fall risk appears necessary for adoption of these behaviors to reduce perceived risk. Fall-prevention campaigns should emphasize behaviors where awareness is low. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

Improving School Bus Safety. Transportation Research Board Special Report 222.

Science.gov (United States)

National Academy of Sciences - National Research Council, Washington, DC. Transportation Research Board.

While school buses transport more passengers per trip, the rate of occupant fatalities per mile driven for school buses is one-quarter that for passenger cars. Nevertheless, the public expects school districts and other school bus operators to take all reasonable precautions to protect children as they travel to and from school. Although a variety…

Objective and character of safety culture

International Nuclear Information System (INIS)

Aastrand, K.

2005-01-01

The main topics of the lecture include: (1) concepts of safety culture introduced in INSAG-4, (2) stages of development of safety culture, (3) general practises to develop organizational effectiveness as a means of implementing and improving safety culture, (4) specific practises to develop safety culture applying to all stages of a nuclear installation's life cycle, (5) suggestions on assessing the progress of development of safety culture in an organization and on evaluating the influence of major environmental and internal organizational factors on that culture, and (6) guidance on the detection of incipient weaknesses in safety culture that may be of particular interest to regulators and those responsible for self-assessment in organization

Terms standardization between the rules of diagnosis radiation equipment safety management and atomic energy law: problems and suggestions

Energy Technology Data Exchange (ETDEWEB)

Kim, Hwa Gon; Kang, Se Sik; Kim, Chang Soo; Park, Cheol Seo [Catholic University of Pusan, Busan (Korea, Republic of)

2006-03-15

The rules and terms are described different meaning in this results the research is accomplished for preventing practical workers from confusion. Atomic law are kept up modification and development in our situation by the ICRP's recommendation, on the other hand, the rules of diagnosis radiation equipment safety managements are modified partial, then resulted in confusion. The study was comparison between the rules of diagnosis radiation equipment safety management and atomic energy law, and the modification items obtained were as follows. With each other different the terms and units are used. With the exception of special terms for affairs usage, it is needless to say that common term uniformity is standardized. The standardization of rules and guidance have not need to confusion radiological practical workers. The following is omitted. The radiation protection against the patient and the hospital visitor. Radiation dose limit of the woman patient who is in the process of becoming pregnant. Radiation dose limit of the person who is not regarded as medical exposure. The control of the exposure of pregnant of women at work.

Terms standardization between the rules of diagnosis radiation equipment safety management and atomic energy law: problems and suggestions

International Nuclear Information System (INIS)

Kim, Hwa Gon; Kang, Se Sik; Kim, Chang Soo; Park, Cheol Seo

2006-01-01

The rules and terms are described different meaning in this results the research is accomplished for preventing practical workers from confusion. Atomic law are kept up modification and development in our situation by the ICRP's recommendation, on the other hand, the rules of diagnosis radiation equipment safety managements are modified partial, then resulted in confusion. The study was comparison between the rules of diagnosis radiation equipment safety management and atomic energy law, and the modification items obtained were as follows. With each other different the terms and units are used. With the exception of special terms for affairs usage, it is needless to say that common term uniformity is standardized. The standardization of rules and guidance have not need to confusion radiological practical workers. The following is omitted. The radiation protection against the patient and the hospital visitor. Radiation dose limit of the woman patient who is in the process of becoming pregnant. Radiation dose limit of the person who is not regarded as medical exposure. The control of the exposure of pregnant of women at work

Robots and plant safety

International Nuclear Information System (INIS)

Christensen, P.

1996-02-01

The application of robots in the harsh environments in which TELEMAN equipment will have to operate has large benefits, but also some drawbacks. The main benefit is the ability gained to perform tasks where people cannot go, while there is a possibility of inflicting damage to the equipment handled by the robot, and the plant when mobile robots are involved. The paper describes the types of possible damage and the precautions to be taken in order to reduce the frequency of the damaging events. A literature study for the topic only gave some insight into examples, but no means for a systematic treatment of the topic. (au) 16 refs

Objectives of safety evaluation

International Nuclear Information System (INIS)

Rosen, M.

1980-01-01

An examination of the safety aspects of exported nuclear power plants demonstrates that additional and somewhat special considerations exist for these plants. In view of this and the generally small regulatory staffs of importing coutnries, suggestions are given for measures which should be taken by various organizations involved in the export and import of nuclear power facilities to raise the level of the very essential safety assessment. (orig.)

Hospital disinfection: efficacy and safety issues.

Science.gov (United States)

Dettenkofer, Markus; Block, Colin

2005-08-01

To review recent publications relevant to hospital disinfection (and cleaning) including the reprocessing of medical instruments. The key question as to whether the use of disinfectants on environmental surfaces rather than cleaning with detergents only reduces nosocomial infection rates still awaits conclusive studies. New disinfectants, mainly peroxygen compounds, show good sporicidal properties and will probably replace more problematical substances such as chlorine-releasing agents. The safe reprocessing of medical devices requires a well-coordinated approach, starting with proper cleaning. New methods and substances show promising activity for preventing the transmission of prions. Different aspects of virus inactivation have been studied, and the transmissibility, e.g. of norovirus, shows the need for sound data on how different disinfectant classes perform. Biofilms or other forms of surface-adherent organisms pose an extraordinary challenge to decontamination. Although resistance to biocides is generally not judged to be as critical as antibiotic resistance, scientific data support the need for proper use, i.e. the avoidance of widespread application, especially in low concentrations and in consumer products. Chemical disinfection of heat-sensitive instruments and targeted disinfection of environmental surfaces are established components of hospital infection control. To avoid danger to staff, patients and the environment, prudent use as well as established safety precautions are required. New technologies and products should be evaluated with sound methods. As emerging resistant pathogens will challenge healthcare facilities in the future even more than at present, there is a need for well-designed studies addressing the role of disinfection in hospital infection control.

Promoting safety voice with safety-specific transformational leadership: the mediating role of two dimensions of trust.

Science.gov (United States)

Conchie, Stacey M; Taylor, Paul J; Donald, Ian J

2012-01-01

Although safety-specific transformational leadership is known to encourage employee safety voice behaviors, less is known about what makes this style of leadership effective. We tested a model that links safety-specific transformational leadership to safety voice through various dimensions of trust. Data from 150 supervisor-employee dyads from the United Kingdom oil industry supported our predictions that the effects of safety-specific transformational leadership are sequentially mediated by affect-based trust beliefs and disclosure trust intentions. Moreover, we found that reliance trust intentions moderated the effect of disclosure: employees' disclosure intentions mediated the effects of affect-based trust on safety voice behaviors only when employees' intention to rely on their leader was moderate to high. These findings suggest that leaders seeking to encourage safety voice behaviors should go beyond "good reason" arguments and develop affective bonds with their employees.

Is Safety in Danger?

DEFF Research Database (Denmark)

Broncano-Berrocal, Fernando

2014-01-01

In “Knowledge Under Threat” (Philosophy and Phenomenological Research 2012), Tomas Bogardus proposes a counterexample to the safety condition for knowledge. Bogardus argues that the case demonstrates that unsafe knowledge is possible. I argue that the case just corroborates the well-known require......In “Knowledge Under Threat” (Philosophy and Phenomenological Research 2012), Tomas Bogardus proposes a counterexample to the safety condition for knowledge. Bogardus argues that the case demonstrates that unsafe knowledge is possible. I argue that the case just corroborates the well......-known requirement that modal conditions like safety must be relativized to methods of belief formation. I explore several ways of relativizing safety to belief-forming methods and I argue that none is adequate: if methods were individuated in those ways, safety would fail to explain several much-discussed cases. I...... then propose a plausible externalist principle of method individuation. On the one hand, relativizing safety to belief-forming methods in the way suggested allows the defender of safety to account for the cases. On the other hand, it shows that the target known belief of Bogardus’s example is safe. Finally, I...

SRP reactor safety evolution

International Nuclear Information System (INIS)

Rankin, D.B.

1984-01-01

The Savannah River Plant reactors have operated for over 100 reactor years without an incident of significant consequence to on or off-site personnel. The reactor safety posture incorporates a conservative, failure-tolerant design; extensive administrative controls carried out through detailed operating and emergency written procedures; and multiple engineered safety systems backed by comprehensive safety analyses, adapting through the years as operating experience, changes in reactor operational modes, equipment modernization, and experience in the nuclear power industry suggested. Independent technical reviews and audits as well as a strong organizational structure also contribute to the defense-in-depth safety posture. A complete review of safety history would discuss all of the above contributors and the interplay of roles. This report, however, is limited to evolution of the engineered safety features and some of the supporting analyses. The discussion of safety history is divided into finite periods of operating history for preservation of historical perspective and ease of understanding by the reader. Programs in progress are also included. The accident at Three Mile Island was assessed for its safety implications to SRP operation. Resulting recommendations and their current status are discussed separately at the end of the report. 16 refs., 3 figs

Some Thoughts on Regulating Food Safety in China

Institute of Scientific and Technical Information of China (English)

Wang Lei

2006-01-01

The article analyses the current situation of food safety supervision in China, summarizes the deep reason behind the food safety and puts forward some suggestions to strengthen the supervision by using foreign references and advance operations from the legislation, the food safety supervision system and other aspects.

An emerging playbook for antibody-drug conjugates: lessons from the laboratory and clinic suggest a strategy for improving efficacy and safety.

Science.gov (United States)

Drake, Penelope M; Rabuka, David

2015-10-01

Antibody-drug conjugates (ADCs) have become de rigueur for pharmaceutical oncology drug development pipelines. There are more than 40 ADCs undergoing clinical trials and many more in preclinical development. The field has rushed to follow the initial successes of Kadcyla™ and Adcetris™, and moved forward with new targets without much pause for optimization. In some respects, the ADC space has become divided into the clinical realm-where the proven technologies continue to represent the bulk of clinical candidates with a few exceptions-and the research realm-where innovations in conjugation chemistry and linker technologies have suggested that there is much room for improvement in the conventional methods. Now, two and four years after the approvals of Kadcyla™ and Adcetris™, respectively, consensus may at last be building that these two drugs rely on rather unique target antigens that enable their success. It is becoming increasingly clear that future target antigens will require additional innovative approaches. Next-generation ADCs have begun to move out of the lab and into the clinic, where there is a pressing need for continued innovation to overcome the twin challenges of safety and efficacy. Copyright © 2015 Elsevier Ltd. All rights reserved.

Foreign Body Retrieval

Medline Plus

Full Text Available ... so as not to expose the fetus to radiation. If an x-ray is necessary, precautions will be taken to minimize ... Safety page for more information about pregnancy and x-rays. If the foreign body is lodged in a ...

49 CFR 176.162 - Security.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Security. 176.162 Section 176.162 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION... Class 1 (Explosive) Materials Precautions During Loading and Unloading § 176.162 Security. A responsible...

Bilding (Kay) Ki Damaje PSA (:30) (Damaged Buildings)

Centers for Disease Control (CDC) Podcasts

2010-02-18

An important public health announcement about safety precautions for potential physical and chemical hazards found in damaged buildings. Language: Haitian Creole.  Created: 2/18/2010 by Centers for Disease Control and Prevention (CDC).   Date Released: 2/18/2010.

Patient safety--worker safety: building a culture of safety to improve healthcare worker and patient well-being.

Science.gov (United States)

Yassi, Annalee; Hancock, Tina

2005-01-01

Patient safety within the Canadian healthcare system is currently a high national priority, which merits a comprehensive understanding of the underlying causes of adverse events. Not least among these is worker health and safety, which is linked to patient outcomes. Healthcare workers have a high risk of workplace injuries and more mental health problems than most other occupational groups. Many healthcare professionals feel fatigued, stressed, in pain, or at risk of illness or injury-factors they feel impede their ability to provide consistent quality care. With this background, the Occupational Health and Safety Agency for Healthcare (OHSAH) in British Columbia, jointly governed by healthcare unions and healthcare employers, launched several major initiatives to improve the healthcare workplace. These included the promotion of safe patient handling, adaptive clothing, scheduled toileting, stroke management training, measures to improve management of aggressive behaviour and, of course, infection control-all intended to improve the safety of workers, but also to improve patient safety and quality of care. Other projects also explicitly promoting physical and mental health at work, as well as patient safety are also underway. Results of the projects are at various stages of completion, but ample evidence has already been obtained to indicate that looking after the well-being of healthcare workers results in safer and better quality patient care. While more research is needed, our work to date suggests that a comprehensive systems approach to promoting a climate of safety, which includes taking into account workplace organizational factors and physical and psychological hazards for workers, is the best way to improve the healthcare workplace and thereby patient safety.

Natural safety indicators and their application to repository safety cases

International Nuclear Information System (INIS)

Miller, B.

2002-01-01

Radiological dose and risk are the standard end-points calculated in all performance assessments. Their calculation requires, however, assumptions to be made for future human behaviour. To complement dose and risk, other safety indicators have been suggested which do not require such assumptions to be made. One proposed set of safety indicators are the concentrations and fluxes of naturally-occurring chemical species in the environment which may be compared with the performance assessment predictions of repository releases. Such comparisons can be valid because both the natural and repository species would occur in the same system and their transport behaviour would be controlled by exactly the same processes at the same rates. Although simple in concept, there is currently no consensus on the most appropriate comparisons to make or on the interpretation of such comparisons. A number of national and international research projects are evaluating this proposed approach, including an IAEA Co-ordinated Research Programme. These projects suggest that that the approach appears to be workable and that it may be a valuable component of a safety case, complementing the dose and risk presentations. Further work is, however, necessary to develop the approach to a level where it may be confidently applied in further performance assessments in a consistent and methodical manner. (author)

Measuring safety climate in elderly homes.

Science.gov (United States)

Yeung, Koon-Chuen; Chan, Charles C

2012-02-01

Provision of a valid and reliable safety climate dimension brings enormous benefits to the elderly home sector. The aim of the present study was to make use of the safety climate instrument developed by OSHC to measure the safety perceptions of employees in elderly homes such that the factor structure of the safety climate dimensions of elderly homes could be explored. In 2010, surveys by mustering on site method were administered in 27 elderly homes that had participated in the "Hong Kong Safe and Healthy Residential Care Home Accreditation Scheme" organized by the Occupational Safety and Health Council. Six hundred and fifty-one surveys were returned with a response rate of 54.3%. To examine the factor structure of safety climate dimensions in our study, an exploratory factor analysis (EFA) using principal components analysis method was conducted to identify the underlying factors. The results of the modified seven-factor's safety climate structure extracted from 35 items better reflected the safety climate dimensions of elderly homes. The Cronbach alpha range for this study (0.655 to 0.851) indicated good internal consistency among the seven-factor structure. Responses from managerial level, supervisory and professional level, and front-line staff were analyzed to come up with the suggestion on effective ways of improving the safety culture of elderly homes. The overall results showed that managers generally gave positive responses in the factors evaluated, such as "management commitment and concern to safety," "perception of work risks and some contributory influences," "safety communication and awareness," and "safe working attitude and participation." Supervisors / professionals, and frontline level staff on the other hand, have less positive responses. The result of the lowest score in the factors - "perception of safety rules and procedures" underlined the importance of the relevance and practicability of safety rules and procedures. The modified OSHC

Space Weather Nowcasting of Atmospheric Ionizing Radiation for Aviation Safety

Science.gov (United States)

Mertens, Christopher J.; Wilson, John W.; Blattnig, Steve R.; Solomon, Stan C.; Wiltberger, J.; Kunches, Joseph; Kress, Brian T.; Murray, John J.

2007-01-01

There is a growing concern for the health and safety of commercial aircrew and passengers due to their exposure to ionizing radiation with high linear energy transfer (LET), particularly at high latitudes. The International Commission of Radiobiological Protection (ICRP), the EPA, and the FAA consider the crews of commercial aircraft as radiation workers. During solar energetic particle (SEP) events, radiation exposure can exceed annual limits, and the number of serious health effects is expected to be quite high if precautions are not taken. There is a need for a capability to monitor the real-time, global background radiations levels, from galactic cosmic rays (GCR), at commercial airline altitudes and to provide analytical input for airline operations decisions for altering flight paths and altitudes for the mitigation and reduction of radiation exposure levels during a SEP event. The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) model is new initiative to provide a global, real-time radiation dosimetry package for archiving and assessing the biologically harmful radiation exposure levels at commercial airline altitudes. The NAIRAS model brings to bear the best available suite of Sun-Earth observations and models for simulating the atmospheric ionizing radiation environment. Observations are utilized from ground (neutron monitors), from the atmosphere (the METO analysis), and from space (NASA/ACE and NOAA/GOES). Atmospheric observations provide the overhead shielding information and the ground- and space-based observations provide boundary conditions on the GCR and SEP energy flux distributions for transport and dosimetry simulations. Dose rates are calculated using the parametric AIR (Atmospheric Ionizing Radiation) model and the physics-based HZETRN (High Charge and Energy Transport) code. Empirical models of the near-Earth radiation environment (GCR/SEP energy flux distributions and geomagnetic cut-off rigidity) are benchmarked

Communication from the Safety Service

CERN Multimedia

DG Unit - General Safety

In any emergency, you should call 74444 (+41 22 76 74444). There is something that bears repeating - especially in the light of recent events. The new Safety Bulletin, No. 2009-01, reminds us that, although raising the alarm and giving first aid in an emergency are everyone’s job, “medical transport is a job for professionals.” You are urged to read, print and share the Safety Bulletin No. 2009-01: remember for all emergencies you should dial 74444! We appreciate your comments and suggestions. Write to safety-general@cern.ch.

Radioactive hazards

International Nuclear Information System (INIS)

Gill, J.R.

1980-01-01

The use of radioactive substances in hospital laboratories is discussed and the attendant hazards and necessary precautions examined. The new legislation under the Health and Safety at Work Act which, it is proposed, will replace existing legal requirements in the field of health and safety at work by a system of regulations and approved codes of practice designed to maintain or improve the standards of health, safety and welfare already established, is considered with particular reference to protection against ionising radiations. (UK)

76 FR 67461 - Cosmetic Microbiological Safety Issues; Public Meeting

Science.gov (United States)

2011-11-01

...] Cosmetic Microbiological Safety Issues; Public Meeting AGENCY: Food and Drug Administration, HHS. ACTION... Administration (FDA) is announcing a public meeting entitled ``Cosmetic Microbiological Safety Issues.'' The... cosmetic microbiological safety and to suggest areas for the possible development of FDA guidance documents...

Early Childhood Safety Education: An Overview of Safety Curriculum in Outer Metropolitan, Regional and Rural NSW

Science.gov (United States)

Barr, Jennifer; Saltmarsh, Sue; Klopper, Christopher

2009-01-01

This article reports on preliminary findings from a 2008 survey and telephone interviews with 27 directors of early childhood education and care (ECEC) services located in regional and rural districts of the Australian state of New South Wales. Data from the study suggests that some areas of safety education--most notably road/traffic safety and…

Risk measures in living probabilistic safety assessment

International Nuclear Information System (INIS)

Holmberg, J.; Niemelae, I.

1993-05-01

The main objectives of the study are: to define risk measures and suggested uses of them in various living PSA applications for the operational safety management and to describe specific model features required for living PSA applications. The report is based on three case studies performed within the Nordic research project Safety Evaluation by Use of Living PSA and Safety Indicators. (48 refs., 11 figs., 17 tabs.)

The Key to School Security.

Science.gov (United States)

Hotle, Dan

1993-01-01

In addition to legislative accessibility requirements, other security issues facing school administrators who select a security system include the following: access control; user friendliness; durability or serviceability; life safety precautions; possibility of vandalism, theft, and tampering; and key control. Offers steps to take in considering…

Leadership, safety climate, and continuous quality improvement: impact on process quality and patient safety.

Science.gov (United States)

McFadden, Kathleen L; Stock, Gregory N; Gowen, Charles R

2014-10-01

Successful amelioration of medical errors represents a significant problem in the health care industry. There is a need for greater understanding of the factors that lead to improved process quality and patient safety outcomes in hospitals. We present a research model that shows how transformational leadership, safety climate, and continuous quality improvement (CQI) initiatives are related to objective quality and patient safety outcome measures. The proposed framework is tested using structural equation modeling, based on data collected for 204 hospitals, and supplemented with objective outcome data from the Centers for Medicare and Medicaid Services. The results provide empirical evidence that a safety climate, which is connected to the chief executive officer's transformational leadership style, is related to CQI initiatives, which are linked to improved process quality. A unique finding of this study is that, although CQI initiatives are positively associated with improved process quality, they are also associated with higher hospital-acquired condition rates, a measure of patient safety. Likewise, safety climate is directly related to improved patient safety outcomes. The notion that patient safety climate and CQI initiatives are not interchangeable or universally beneficial is an important contribution to the literature. The results confirm the importance of using CQI to effectively enhance process quality in hospitals, and patient safety climate to improve patient safety outcomes. The overall pattern of findings suggests that simultaneous implementation of CQI initiatives and patient safety climate produces greater combined benefits.

'Present nuclear emergency responses in India: tracing requirements and guidelines suggested after Fukushima accident in regards to public and plant safety

International Nuclear Information System (INIS)

Jawale, Priyanka M.

2014-01-01

In this poster the primary initiative is to educate the public at large and instill confidence about the present Emergency Response Systems of DAE and the imminent agencies in India. Poster attempts to analyse present regulatory and safety systems, mechanisms like plant and site emergency response plans are in place to handle radiation emergencies and how public will not be affected in any manner. In India also we needed some supplementary provisions to cope up with major disasters in Nuclear Power Plants (NPP) apart from the existing one. Some of the NPPs are not under the UN safeguards, which can not import Uranium also need extra care and protection. Regulatory and safety functions of Atomic Energy in India are carried out by the Atomic Energy Regulatory Board (Atomic Energy Regulatory Board), the poster attempts to explain the present regulatory and safety mechanism under Atomic Energy Regulatory Board. We have the plant and site emergency response plans in place. The well planned functioning of these is demonstrated here. India is equipped with detail plans of emergency response system, to handle the radiation emergencies in public domain even at the locations where DAE facility is not available

Nuclear Safety Review for the Year 2003

International Nuclear Information System (INIS)

2004-08-01

The Nuclear Safety Review reports on worldwide efforts to strengthen nuclear, radiation and transport safety and the safety of radioactive waste management. In line with the suggestions made by the Board of Governors in March 2002, the first part is more analytical and less descriptive. This short analytical overview is supported by a second part, which describes significant safety related events and issues worldwide during 2003. A Draft Nuclear Safety Review for the Year 2003 was submitted to the March 2004 session of the Board of Governors in document GOV/2004/3. The final version of the Nuclear Safety Review for the Year 2003 was prepared in the light of the discussion by the Board.

Selling safety: the use of celebrities in improving awareness of safety in commercial aviation.

Science.gov (United States)

Molesworth, Brett R C; Seneviratne, Dimuth; Burgess, Marion

2016-07-01

The aim of this study was to investigate the influential power of a celebrity to convey key safety messages in commercial aviation using a pre-flight safety briefing video. In addition, the present research sought to examine the effectiveness of subtitles in aiding the recall of these important messages as well as how in-cabin aircraft noise affects recall of this information. A total of 101 participants were randomly divided into four groups (no noise without subtitles, no noise with subtitles, noise without subtitles and noise with subtitles) and following exposure to a pre-recorded pre-flight safety briefing video were tested for recall of key safety messages within that video. Participants who recognised and recalled the name of the celebrity in the safety briefing video recalled significantly more of the messages than participants who did not recognise the celebrity. Subtitles were also found to be effective, however, only in the presence of representative in-cabin aircraft noise. Practitioner Summary: Passenger attention to pre-flight safety briefings on commercial aircraft is poor. Utilising the celebrity status of a famous person may overcome this problem. Results suggest that celebrities do increase the recall of safety-related information.

Work Pressure and Safety Behaviors among Health Workers in Ghana: The Moderating Role of Management Commitment to Safety

OpenAIRE

Amponsah-Tawaih, Kwesi; Adu, Michael Appiah

2016-01-01

Background: safety and healthy working environment has received numerous research attention over the years. Majority of these researches seem to have been conducted in the construction industry, with little attention in the health sector. Nonetheless, there are couple of studies conducted in Africa that suggest pressure in hospitals. Therefore the aim of the study was to examine how pressure influence safety behavior in the hospitals. With reference to the relevance of safety behavior in prim...

Traffic safety strategies

Directory of Open Access Journals (Sweden)

V. Sadauskas

2003-04-01

Full Text Available Fast development of the number of vehicles is closely related not only to large benefit for the public but also to certain undesirable social and economic consequences. Firstly - large numbers of injured and killed people are involved into the accidents. The target to improve traffic safety situation in Lithuania can be reached only after the detailed evaluation of transport system, environment, traffic participants, road and vehicle. Taking into consideration the accident situation in Lithuania and its causes the followings priority trends are suggested: The improvement of the coordination of road traffic safety system, the training and education of road users, the explanation of the importance of traffic safety and its propagation, the improvement of traffic conditions. Recommendations and proposals for differentiated criterion of maximum speed limit selection taking into account different factors are provided in the work.

Regulatory Activities for Licensee's Safety Culture

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Kwang Sik

2008-01-01

Weaknesses in safety culture have contributed to a number of incidents/accidents in the nuclear and other high hazard sectors worldwide in the past. These events have fostered an increasing awareness of the need for licensees to develop a strong safety culture to support successful and sustainable nuclear safety performance. Regulatory bodies are taking a growing interest in this issue, and several are actively working to develop and implement approaches to maintaining regulatory oversight of licensee safety culture. However, these approaches are not yet well-established, and it was considered prudent to share experiences and developing methodologies in order to disseminate good practices and avoid potential pitfalls. This paper presents the findings, conclusions and recommendations of international meetings and other countries' activities on safety culture and gives some suggestions for regulators to consider when planning regulatory oversight for licensee's safety culture

Safety Information System Guide

International Nuclear Information System (INIS)

Bullock, M.G.

1977-03-01

This Guide provides guidelines for the design and evaluation of a working safety information system. For the relatively few safety professionals who have already adopted computer-based programs, this Guide may aid them in the evaluation of their present system. To those who intend to develop an information system, it will, hopefully, inspire new thinking and encourage steps towards systems safety management. For the line manager who is working where the action is, this Guide may provide insight on the importance of accident facts as a tool for moving ideas up the communication ladder where they will be heard and acted upon; where what he has to say will influence beneficial changes among those who plan and control his operations. In the design of a safety information system, it is suggested that the safety manager make friends with a computer expert or someone on the management team who has some feeling for, and understanding of, the art of information storage and retrieval as a new and better means for communication

Maintenance of safety behaviors via response-produced stimuli.

Science.gov (United States)

Angelakis, Ioannis; Austin, Jennifer L

2015-11-01

Animal studies suggest that safety behaviors may be maintained by internally or externally produced safety signals, which function as positive reinforcers. We designed two experiments to test this phenomenon with humans. Participants played a computerized game in which they could earn or lose treasures by clicking on a map. In baseline, losses could be postponed by pressing a pedal that also produced a blue bar at the bottom of the screen. During test conditions, no losses were programmed, and pedal presses turned the bar from yellow to blue (Test 1) or blue to yellow (Test 2). In Experiment 2, new participants were exposed to the same conditions but were given information about the safety of the test environment. In both experiments, participants engaged in high rates of pedal pressing when presses were followed by blue bars, suggesting the bar functioned as a safety signal. We discuss how these findings may relate to safety behaviors commonly observed in certain mental health disorders. © The Author(s) 2015.

Suggestibility and suggestive modulation of the Stroop effect.

Science.gov (United States)

Kirsch, Irving

2011-06-01

Although the induction of a hypnotic state does not seem necessary for suggestive modulation of the Stroop effect, this important phenomenon has seemed to be dependent on the subject's level of hypnotic suggestibility. Raz and Campbell's (2011) study indicates that suggestion can modulate the Stroop effect substantially in very low suggestible subjects, as well as in those who are highly suggestible. This finding casts doubt on the presumed mechanism by which suggestive modulation is brought about. Research aimed at uncovering the means by which low suggestible individuals are able to modulate the Stroop effect would be welcome, as would assessment of this effect in moderately suggestible people. Copyright © 2010 Elsevier Inc. All rights reserved.

77 FR 58567 - Information Collection Activities: Well Control and Production Safety Training, Submitted for...

Science.gov (United States)

2012-09-21

... manner by well trained personnel using technology, precautions, and other techniques sufficient to prevent or minimize the likelihood of blowouts, loss of well control, fires, spillages, physical... jobs in a safe and pollution-free manner. In some instances, BSEE will conduct oral interviews of...

A suggested color scheme for reducing perception-related accidents on construction work sites.

Science.gov (United States)

Yi, June-seong; Kim, Yong-woo; Kim, Ki-aeng; Koo, Bonsang

2012-09-01

Changes in workforce demographics have led to the need for more sophisticated approaches to addressing the safety requirements of the construction industry. Despite extensive research in other industry domains, the construction industry has been passive in exploring the impact of a color scheme; perception-related accidents have been effectively diminished by its implementation. The research demonstrated that the use of appropriate color schemes could improve the actions and psychology of workers on site, thereby increasing their perceptions of potentially dangerous situations. As a preliminary study, the objects selected by rigorous analysis on accident reports were workwear, safety net, gondola, scaffolding, and safety passage. The colors modified on site for temporary facilities were adopted from existing theoretical and empirical research that suggests the use of certain colors and their combinations to improve visibility and conspicuity while minimizing work fatigue. The color schemes were also tested and confirmed through two workshops with workers and managers currently involved in actual projects. The impacts of color schemes suggested in this paper are summarized as follows. First, the color schemes improve the conspicuity of facilities with other on site components, enabling workers to quickly discern and orient themselves in their work environment. Secondly, the color schemes have been selected to minimize the visual work fatigue and monotony that can potentially increase accidents. Copyright © 2011 Elsevier Ltd. All rights reserved.

Nuclear Energy

International Nuclear Information System (INIS)

1982-11-01

A brief indication is given of the United Kingdom nuclear power programme including descriptions of the fission process, the Magnox, AGR and PWR type reactors, the recycling process, waste management and decommissioning, safety precautions, the prototype fast reactor at Dounreay, and the JET fusion experiment. (U.K.)

Eddy Current, Magnetic Particle and Hardness Testing, Aviation Quality Control (Advanced): 9227.04.

Science.gov (United States)

Dade County Public Schools, Miami, FL.

This unit of instruction includes the principles of eddy current, magnetic particle and hardness testing; standards used for analyzing test results; techniques of operating equipment; interpretation of indications; advantages and limitations of these methods of testing; care and calibration of equipment; and safety and work precautions. Motion…

30 CFR 75.335 - Seal strengths, design applications, and installation.

Science.gov (United States)

2010-07-01

... characteristics, flame spread index, entry size, engineering design and analysis, elasticity of design, material... land surveyor. (iv) Specific mine site information, including— (A) Type of seal; (B) Safety precautions... and materials used to maintain each type of seal; (K) Methods to address shafts and boreholes in the...

A proposed approach for enhancing design safety assurance of future plants

International Nuclear Information System (INIS)

Oh, Kyu Myeng; Ahn, Sang Kyu; Lee, Chang Ju; Kim, Inn Seock

2010-01-01

This paper provides various insights from a detailed review of deterministic approaches typically applied to ensure design safety of nuclear power plants (NPPs) and risk-informed approaches proposed to evaluate safety of advanced reactors such as Generation IV reactors. Also considered herein are the risk-informed safety analysis (RISA) methodology suggested by Westinghouse as a means to improve the conventional accident analysis, together with the Technology Neutral Framework recently suggested by the U.S. NRC for safety evaluation of future plants. These insights from the comparative review of deterministic and risk-informed approaches could be used in further enhancing the methodology for design safety assurance of future plants

Environmental, health and safety aspects of nanotechnology—implications for the R&D in (small companies

Directory of Open Access Journals (Sweden)

Steffi Friedrichs and Jurgen Schulte

2007-01-01

Full Text Available The growth of nanotechnology has led to an unprecedented research and development effort in both the public and the private sectors; world wide, an increasing number of laboratories, fabrication and manufacturing plants develop or apply novel nanometre-sized materials for applications ranging from large-scale industrial materials, to electronic components and healthcare and medical products; an increasing number of start-ups have been launched to establish their nanotechnology-based products in a trillion-dollar market.Very little, however, is known about the interaction of man-made nanostructured materials and living organisms, as studies of nanotoxicology are gaining increasing interest, but are still in their infancy. Despite the formation of many focus and lobbying groups, proper legislation of the environmental, health and safety aspects of nanotechnology will take years to be implemented. In the mean time, it is of utmost importance that companies working with nanometre-sized matter take appropriate precautions to protect their staff, the environment and the customer. Toxicology tests and agency approval of new nanometre-sized materials are prohibitively expensive, but, even if working on a tight budget, nanotechnology companies can achieve an ethical and safe business conduct via a number of possible routes.

The mediating role of integration of safety by activity versus operator between organizational culture and safety climate.

Science.gov (United States)

Auzoult, Laurent; Gangloff, Bernard

2018-04-20

In this study, we analyse the impact of the organizational culture and introduce a new variable, the integration of safety, which relates to the modalities for the implementation and adoption of safety in the work process, either through the activity or by the operator. One hundred and eighty employees replied to a questionnaire measuring the organizational climate, the safety climate and the integration of safety. We expected that implementation centred on the activity or on the operator would mediate the relationship between the organizational culture and the safety climate. The results support our assumptions. A regression analysis highlights the positive impact on the safety climate of organizational values of the 'rule' and 'support' type, as well as of integration by the operator and activity. Moreover, integration mediates the relation between these variables. The results suggest to take into account organizational culture and to introduce different implementation modalities to improve the safety climate.

Assessing verticalization effects on urban safety perception

OpenAIRE

Lourenço, Ricardo Barros

2017-01-01

We describe an experiment with the modeling of urban verticalization effects on perceived safety scores as obtained with computer vision on Google Streetview data for New York City. Preliminary results suggests that for smaller buildings (between one and seven floors), perceived safety increases with building height, but that for high-rise buildings, perceived safety decreases with increased height. We also determined that while height contributing for this relation, other zonal aspects also ...

Risk, fear and public safety

International Nuclear Information System (INIS)

Siddall, E.

1981-04-01

Part 1 of the paper advocates a rational approach to public safety based on unbiassed quantitative assessment of overall risks and benefits of any technological activity. It shows that improved safety should be attainable at less cost than is the case at present. Part 2 offers an explanation of why so little has been achieved in this direction and outlines the major errors in present practices. Part 3 suggests what might realistically be done towards the achievement of some of the possible benefits. Factors which are important in the study of safety and evidence supporting the arguments are discussed in six appendices. It is urged that the scientific and technological community should improve its understanding of safety as a specialization and should endeavour to lead rather than follow in our present political system

Evaluation of the improvement suggestion system in a nuclear facility

International Nuclear Information System (INIS)

Carnaval, Joao Paulo Rodrigues; Moraes, Geice Almeida

2017-01-01

This work evaluated methods for processing improvement suggestions of a nuclear factory, with the intention to verify those which best fits to the company purposes. Two methods for processing improvement suggestions were applied in the studied organization. The first one was guided to the processing suggestions by specific independent sectors of the company and the second one was conducted to the processing of suggestions by a multidisciplinary team. It has been concluded that a multidisciplinary team focused on research and development would be the best option to the implementation of improvement suggestions and technological innovation on this facility, instead of multi sector processing which revealed to be excessive bureaucratic before the expected goals. This study can be used by nuclear facilities to optimize an existing system of improvements analysis or even guide them for the implantation of a new one. It is more significant for the companies certified on ISO and OHSAS standards for the quality management, environmental and safety and occupational health systems which requires that the continuous improvement must exist and to be demonstrated. But it is also relevant for nuclear plants aiming to implement an Integrated Management System certified on ISO Standards. (author)

Evaluation of the improvement suggestion system in a nuclear facility

Energy Technology Data Exchange (ETDEWEB)

Carnaval, Joao Paulo Rodrigues; Moraes, Geice Almeida, E-mail: joaocarnaval@inb.gov.br, E-mail: geice@inb.gov.br [Industrias Nucleares do Brasil S.A (INB), Resende, RJ (Brazil)

2017-11-01

This work evaluated methods for processing improvement suggestions of a nuclear factory, with the intention to verify those which best fits to the company purposes. Two methods for processing improvement suggestions were applied in the studied organization. The first one was guided to the processing suggestions by specific independent sectors of the company and the second one was conducted to the processing of suggestions by a multidisciplinary team. It has been concluded that a multidisciplinary team focused on research and development would be the best option to the implementation of improvement suggestions and technological innovation on this facility, instead of multi sector processing which revealed to be excessive bureaucratic before the expected goals. This study can be used by nuclear facilities to optimize an existing system of improvements analysis or even guide them for the implantation of a new one. It is more significant for the companies certified on ISO and OHSAS standards for the quality management, environmental and safety and occupational health systems which requires that the continuous improvement must exist and to be demonstrated. But it is also relevant for nuclear plants aiming to implement an Integrated Management System certified on ISO Standards. (author)

Zásady bezpečnostních opatření pořadatelů na sportovní akci bez účasti policie ČR.

OpenAIRE

Buchalová, Kateřina

2012-01-01

Title: Principles of safety measures of sports events organizers without the involvement of police Objectives: The aim of this thesis is a description of security measures at sporting events organizers. Methods: The thesis theoretical style is focused on searching for available sources of study and research, and writing their summary comparing safety measures of the organizers. Results: This work describes the activities of the organizers of sports events and precautions that must be provided...

Patient safety: Safety culture and patient safety ethics

DEFF Research Database (Denmark)

Madsen, Marlene Dyrløv

2006-01-01

,demonstrating significant, consistent and sometimes large differences in terms of safety culture factors across the units participating in the survey. Paper 5 is the results of a study of the relation between safety culture, occupational health andpatient safety using a safety culture questionnaire survey......Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of researchis safety culture; through empirical and theoretical studies to comprehend the phenomenon, address...

Studying the Safety Impact of Autonomous Vehicles Using Simulation-Based Surrogate Safety Measures

Directory of Open Access Journals (Sweden)

Mark Mario Morando

2018-01-01

Full Text Available Autonomous vehicle (AV technology has advanced rapidly in recent years with some automated features already available in vehicles on the market. AVs are expected to reduce traffic crashes as the majority of crashes are related to driver errors, fatigue, alcohol, or drugs. However, very little research has been conducted to estimate the safety impact of AVs. This paper aims to investigate the safety impacts of AVs using a simulation-based surrogate safety measure approach. To this end, safety impacts are explored through the number of conflicts extracted from the VISSIM traffic microsimulator using the Surrogate Safety Assessment Model (SSAM. Behaviours of human-driven vehicles (HVs and AVs (level 4 automation are modelled within the VISSIM’s car-following model. The safety investigation is conducted for two case studies, that is, a signalised intersection and a roundabout, under various AV penetration rates. Results suggest that AVs improve safety significantly with high penetration rates, even when they travel with shorter headways to improve road capacity and reduce delay. For the signalised intersection, AVs reduce the number of conflicts by 20% to 65% with the AV penetration rates of between 50% and 100% (statistically significant at p<0.05. For the roundabout, the number of conflicts is reduced by 29% to 64% with the 100% AV penetration rate (statistically significant at p<0.05.

School Safety Concerns All Students.

Science.gov (United States)

Henderson, Megan

1999-01-01

Suggests that school safety is an issue that concerns all students. Discusses how the staff of the Rockwood South (Missouri) "RAMpage" covered the shootings at Columbine High School in a 14-page issue and in follow-up issues. Suggests that the student newspaper covered the controversial topic in an appropriate, tasteful manner. (RS)

Regional cooperation on nuclear safety

International Nuclear Information System (INIS)

Kato, W.Y.; Chen, J.H.; Kim, D.H.; Simmons, R.B.V.; Surguri, S.

1985-01-01

A review has been conducted of a number of multi-national and bilateral arrangements between governments and between utility-sponsored organizations which provide the framework for international cooperation in the field of nuclear safety. These arrangements include the routine exchange operational data, experiences, technical reports and regulatory data, provision of special assistance when requested, collaboration in safety research, and the holding of international conferences and seminars. Areas which may be better suited for cooperation on a regional basis are identified. These areas include: exchange of operational data and experience, sharing of emergency planning information, and collaboration in safety research. Mechanisms to initiate regional cooperation in these areas are suggested

Burnout in Chinese coal mine safety supervision

International Nuclear Information System (INIS)

Chen, Hong; Chen, Feiyu; Zhu, Dandan; Qi, Hui; Long, Ruyin

2015-01-01

This study examines commonly-suffered job burnout as it relates to the practice of safety supervision in Chinese coal mine enterprises. Commonly-suffered job burnout is a form of job burnout caused by external factors. It is closely related to task characteristics rather than individual idiosyncrasies. To explore the causes of commonly-suffered job burnout, the special attributes (the integrated output attributes, conditional output attributes, and public goods attributes) of coal mine safety output and the inevitability of the invalidation of the bounded authority in safety supervision were analyzed in this study, which reveals the formation mechanism of commonly-suffered job burnout. Moreover, a confirmatory game model was constructed to analyze how the attributes of the safety output and bounded authority of safety supervision act on the safety output. The theoretical connotation of commonly-suffered job burnout was explained based on the job demands-resources theory. A comparative analysis of commonly-suffered job burnout and the job burnout that occurs in the traditional research object was also undertaken from the viewpoint of the job demands, which are determined by the characteristics of the work task and their corresponding coping resources. Policy suggestions were given based on interventions in commonly-suffered job burnout. -- Highlights: •We discuss commonly-suffered job burnout in Chinese coal enterprises. •We analyze the special attributes of coal mine safety output. •We explore two main causes of commonly-suffered job burnout. •We construct a game model to validate how the two causes act on safety output. •We put forward related policy suggestions

Knowledge Representation in Patient Safety Reporting: An Ontological Approach

OpenAIRE

Liang Chen; Yang Gong

2016-01-01

Purpose: The current development of patient safety reporting systems is criticized for loss of information and low data quality due to the lack of a uniformed domain knowledge base and text processing functionality. To improve patient safety reporting, the present paper suggests an ontological representation of patient safety knowledge. Design/methodology/approach: We propose a framework for constructing an ontological knowledge base of patient safety. The present paper describes our desig...

Right Of Way Pest Control. Manual 88.

Science.gov (United States)

Missouri Univ., Columbia. Agricultural Experiment Station.

This training manual provides information needed to meet the minimum EPA standards for certification as a commercial applicator of pesticides in the right-of-way pest control category. The text discusses types of vegetation, the nature of herbicides, application methods, use for specific situations, and safety precautions. (CS)

Validation of Simulation Model for Full Scale Wave Simulator and Discrete Fuild Power PTO System

DEFF Research Database (Denmark)

Hansen, Anders Hedegaard; Pedersen, Henrik C.; Hansen, Rico Hjerm

2014-01-01

In controller development for large scale machinery a good simulation model may serve as a time and money saving factor as well as a safety precaution. Having good models enables the developer to design and test control strategies in a safe and possibly less time consuming environment. For applic...

Innovative safety ideas for fusion experimental machines

International Nuclear Information System (INIS)

Brereton, S.J.; Gouge, M.; Piet, S.J.; Merrill, B.J.; Holland, D.F.; Sze, D.K.

1990-01-01

Throughout the early stages of design of fusion experimental devices, such as ITER, safety experts have worked with designers to incorporate safety features into the design. Recent efforts have focused on passive safety features. Although designs of near-term fusion machines may appear consistent with expected regulatory requirements, the safety characteristics can potentially be more attractive. Here, a variety of suggestions that appear promising in terms of improving safety are given. These include new concepts, innovative technologies, further support of past concepts, and possible modification to operating scenarios. Some technical discussion on the feasibility of the proposals is provided. The ideas are generally conceptual at this stage and require further assessment and development work. However, each has the potential for enhancing the safety of experimental devices. 33 refs., 6 figs., 9 tabs

Monitoring product safety in the postmarketing environment.

Science.gov (United States)

Sharrar, Robert G; Dieck, Gretchen S

2013-10-01

The safety profile of a medicinal product may change in the postmarketing environment. Safety issues not identified in clinical development may be seen and need to be evaluated. Methods of evaluating spontaneous adverse experience reports and identifying new safety risks include a review of individual reports, a review of a frequency distribution of a list of the adverse experiences, the development and analysis of a case series, and various ways of examining the database for signals of disproportionality, which may suggest a possible association. Regulatory agencies monitor product safety through a variety of mechanisms including signal detection of the adverse experience safety reports in databases and by requiring and monitoring risk management plans, periodic safety update reports and postauthorization safety studies. The United States Food and Drug Administration is working with public, academic and private entities to develop methods for using large electronic databases to actively monitor product safety. Important identified risks will have to be evaluated through observational studies and registries.

Development of a new methodology for quantifying nuclear safety culture

International Nuclear Information System (INIS)

Han, Kiyoon; Jae, Moosung

2017-01-01

The present study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses a safety culture impact index (SCII) to monitor the status of safety culture of NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of NPPs. As a result of applying the SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

Development of a new methodology for quantifying nuclear safety culture

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of). Dept. of Nuclear Engineering

2017-01-15

The present study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses a safety culture impact index (SCII) to monitor the status of safety culture of NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of NPPs. As a result of applying the SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

77 FR 22602 - Information Collection Activities: Well Control and Production Safety Training, Submitted for...

Science.gov (United States)

2012-04-16

... Continental Shelf should be conducted in a safe manner by well trained personnel using technology, precautions, and other techniques sufficient to prevent or minimize the likelihood of blowouts, loss of well... to perform their jobs in a safe and pollution-free manner. In some instances, BSEE will conduct oral...

Safety and communication, a winning combination

CERN Multimedia

HSE Unit

2014-01-01

Since 2013, in line with its mission to support CERN’s proactive communication policy in matters of safety, the HSE unit has been following an annual plan for disseminating information on occupational health and safety and environmental protection.   Safety information designed to underline the importance of prevention is published through a variety of channels: Announcements in the CERN Bulletin, Safety bulletins, notably outlining lessons to be learned in the wake of accidents/incidents occuring at CERN, Safety alerts calling for immediate action, sent by e-mail to the services concerned, Prevention campaigns on the CERN site, Poster campaigns in well frequented public areas. Photo: Christoph Balle. Please heed all prevention messages and apply them in your everyday life. Also, we will be pleased to receive any information or suggestions you may have on safety matters. If you have questions about the HSE unit’s communication activities, please send us an e...

Management commitment to safety vs. employee perceived safety training and association with future injury.

Science.gov (United States)

Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2012-07-01

The purpose of this study is to explore and examine, specific to the restaurant industry, two important constructs emerging from the safety climate literature: employee perceptions of safety training and management commitment to safety. Are these two separate constructs? Are there both individual- and shared group-level safety perceptions for these two constructs? What are the relationships between these two constructs and future injury outcomes? A total of 419 employees from 34 limited-service restaurants participated in a prospective cohort study. Employees' perceptions of management commitment to safety and safety training and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. Even though results showed that the correlation between employees'perceived safety training and management commitment to safety was high, confirmatory factor analysis of measurement models showed that two separate factors fit the model better than as two dimensions of a single factor. Homogeneity tests showed that there was a shared perception of the factor of management commitment to safety for the restaurant workers but there was no consistent perception among them for the factor of perceived safety training. Both individual employees'perceived management commitment to safety and perceptions of safety training can predict employees' subsequent injuries above and beyond demographic variables. However, there was no significant relationship between future injury and employees' shared perception of management commitment to safety. Further, our results suggest that the

Report of the Federal Ministry for the Environment, Protection of Nature and Reactor Safety, on the reactor accident of Chernobyl, its repercussions, and precautions taken or to be taken - including addenda

International Nuclear Information System (INIS)

Petroll, M.

1986-01-01

Apart from the report of the Federal Ministry for the Environment, the publication contains the following chapters: 1) Monitoring of environmental radioactivity; 2) analysis of propagation processes; 3) control and measuring points of the Federal Laender to monitor environmental radioactivity; 4) determination of the local dose rate; 5) concentration of radioactivity in air and soil (graphs); 6) up-to-date knowledge of events, measures; 7) nuclear power plants in the Federal Republic of Germany (review of technical safety); 8) interim report of the Committee on Reactor Safety - Reaktorsicherheitskommission - for preliminary evaluation; 9) interim report of the Committee on Radiation Protection - Strahlenschutzkommission - for assessment and evaluation of the effects. (HP) [de

Reviewing industrial safety in nuclear power plants

International Nuclear Information System (INIS)

1990-02-01

This document contains guidance and reference materials for Operational Safety Review Team (OSART) experts, in addition to the OSART Guidelines (TECDOC-449), for use in the review of industrial safety activities at nuclear power plants. It sets out objectives for an excellent industrial safety programme, and suggests investigations which should be made in evaluating industrial safety programmes. The attributes of an excellent industrial safety programme are listed as examples for comparison. Practical hints for reviewing industrial safety are discussed, so that the necessary information can be obtained effectively through a review of documents and records, discussions with counterparts, and field observations. There are several annexes. These deal with major features of industrial safety programmes such as safety committees, reporting and investigation systems and first aid and medical facilities. They include some examples which are considered commendable. The document should be taken into account not only when reviewing management, organization and administration but also in the review of related areas, such as maintenance and operations, so that all aspects of industrial safety in an operating nuclear power plant are covered

Defining safety culture and the nexus between safety goals and safety culture. 4. Enhancing Safety Culture Through the Establishment of Safety Goals

International Nuclear Information System (INIS)

Tateiwa, Kenji; Miyata, Koichi; Yahagi, Kimitoshi

2001-01-01

Safety culture is the perception of each individual and organization of a nuclear power plant that safety is the first priority, and at Tokyo Electric Power Company (TEPCO), we have been practicing it in everyday activities. On the other hand, with the demand for competitiveness of nuclear power becoming even more intense these days, we need to pursue efficient management while maintaining the safety level at the same time. Below, we discuss how to achieve compatibility between safety culture and efficient management as well as enhance safety culture. Discussion at Tepco: safety culture-nurturing activities such as the following are being implemented: 1. informing the employees of the 'Declaration of Safety Promotion' by handing out brochures and posting it on the intranet home page; 2. publishing safety culture reports covering stories on safety culture of other industry sectors, recent movements on safety culture, etc.; 3. conducting periodic questionnaires to employees to grasp how deeply safety culture is being established; 4. carrying out educational programs to learn from past cases inside and outside the nuclear industry; 5. committing to common ownership of information with the public. The current status of safety culture in Japan sometimes seems to be biased to the quest of ultimate safety; rephrasing it, there have been few discussions regarding the sufficiency of the quantitative safety level in conjunction with the safety culture. Safety culture is one of the most crucial foundations guaranteeing the plant's safety, and for example, the plant safety level evaluated by probabilistic safety assessment (PSA) could be said to be valid only on the ground that a sound and sufficient safety culture exists. Although there is no doubt that the safety culture is a fundamental and important attitude of an individual and organization that keeps safety the first priority, the safety culture in itself should not be considered an obstruction to efforts to implement

Enhancing Safety through Generic Competencies

Directory of Open Access Journals (Sweden)

S. Mockel

2014-03-01

Full Text Available This article provides insights into proactive safety management and mitigation. An analysis of accident reports reveals categories of supervening causes of accidents which can be directly linked to the concept of generic competencies (information management, communication and coordination, problem solving, and effect control. These findings strongly suggest adding the human element as another safety-constituting pillar to the concept of ship safety next to technology and regulation. We argue that the human element has unique abilities in dealing with critical and highly dynamic situations which can contribute to the system's recovery from non-routine or critical situations. By educating seafarers in generic competencies we claim to enable the people onboard to successfully deal with critical situations.

Safety and environmental health handbook

Science.gov (United States)

,

1989-01-01

This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

Stadium disasters in Africa: The case for crowd management | Singh ...

African Journals Online (AJOL)

Managers of sport and recreation facilities have numerous legal duties. One of these duties is an obligation to take reasonable precautions to ensure safe activity programmes and facilities for all participants, spectators and staff. The responsibility of a facility manager to ensure the safety of patrons is known as premises ...

Sound propagation from a semi-open shooting range

NARCIS (Netherlands)

Eerden, F.J.M. van der; Berg, F. van den

2011-01-01

Semi-open shooting ranges, in contrast to a fully open shooting range, are often used in the densely populated area of the Netherlands. The Ministry of Defense operates a number of these ranges. In these shooting ranges above the line of fire a number of screens are situated for safety precautions

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

Science.gov (United States)

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

Basic research on human reliability in nuclear power plants

International Nuclear Information System (INIS)

Zhang Li; Deng Zhiliang

1996-10-01

Human reliability in nuclear power plants is one of key factors in nuclear safety and economic operation. According to cognitive science, behaviour theory and ergonomic and on the bases of human cognitive behaviour characteristics, performance shaping factors, human error mechanisms and organization management, the project systematically studied the human reliability in nuclear power plant systems, established the basic theory and methods for analyzing human factor accidents and suggested feasible approaches and countermeasures for precaution against human factor accidents and improving human reliability. The achievement has been applied in operation departments, management departments and scientific research institutions of nuclear power, and has produced guiding significance and practical value to design, operation and management in nuclear power plants. (11 refs.)

Fundamental right to freedom of genetic research and the protection of personal data: the principles of prevention and precaution to guarantee the right to privacy

Directory of Open Access Journals (Sweden)

Regina Linden Ruaro

2015-09-01

Full Text Available This article reviews fundamental rights of freedom of research and protection of personal data in the field of human genetics, it proposes the application of the precautionary principle of prevention. Evaluates the Brazilian legislation on the subject matter of research as to guarantee privacy measure of personal data and information collected in scientific research, a situation that worsens in the middle in digital and virtual world because it is a space virtually rapid development. Focuses on the limitation of fundamental rights, based on the conception that are not absolute. It proposes the principles of precaution and prevention among virtual environment. The deductive and dialectical methods are adopted, having premised most fundamental rights related and under Brazilian law; the dialectical method was used because the issue is the subject of constant debate is necessary confrontation of doctrinal currents and the Brazilian legislation.

Theories of risk and safety: what is their relevance to nursing?

Science.gov (United States)

Cooke, Hannah

2009-03-01

The aim of this paper is to review key theories of risk and safety and their implications for nursing. The concept of of patient safety has only recently risen to prominence as an organising principle in healthcare. The paper considers the wider social context in which contemporary concepts of risk and safety have developed. In particular it looks at sociological debates about the rise of risk culture and the risk society and their influence on the patient safety movement. The paper discusses three bodies of theory which have attempted to explain the management of risk and safety in organisations: normal accident theory, high reliability theory, and grid-group cultural theory. It examine debates between these theories and their implications for healthcare. It discusses reasons for the dominance of high reliability theory in healthcare and its strengths and limitations. The paper suggest that high reliability theory has particular difficulties in explaining some aspects of organisational culture. It also suggest that the implementation of high reliability theory in healthcare has involved over reliance on numerical indicators. It suggests that patient safety could be improved by openness to a wider range of theoretical perspectives.

Disposal of radioactive waste in the Atlantic

International Nuclear Information System (INIS)

1982-06-01

An operation to dispose of low-level radioactive waste in the North Atlantic deeps is undertaken each year. This leaflet seeks to answer questions which are sometimes asked about the operation. It deals with origin, composition, quantity, reason for sea- rather than land-disposal, packaging, transport (rail, road), route of transport, safety precautions, radiation protection, personnel, contamination, site of dump, international regulations, neutral observers, safety standards of containers and control of level of radioactivity of wastes. (U.K.)

Study 2: the precaution applied to long-life nuclear wastes

International Nuclear Information System (INIS)

Marignac, Y.

2000-01-01

Among the problems bonded to the energy development, some risks take a global aspect. These risks concerned the resources management, the safety and by-products accumulation (greenhouse gases or nuclear wastes). This document deals with the nuclear wastes problem, which is not studied today on at international scale. A first part presents the general problem of the long-life wastes in France to define an indicator for the nuclear wastes production. This criteria allows to measure the prevention strategy efficiency. A second part deals with financial aspects and calculates the cost-efficiency factor of the nuclear wastes storage facing their processing. (A.L.B.)

Discussion on safety culture general contract model of consultation enterprises

International Nuclear Information System (INIS)

Dong Huimin; Zhang Hao

2012-01-01

With a high safety requirement, long construction period, a large amount of investment and many influencing factors of the preparation and implementation of project schedule, local nuclear power always is built through EPC. Safety level depends on EPC. Some measures should be taken for local consultation enterprises to improve situation of safety. Some suggestion as follows: safety culture should be received enough attention; management system should be established in according with requirement of safety culture; try to encourage employee involvement; to assess it in time; safety system should be entirely compatible with enterprises system. (authors)

The application of the Appropriate Level of Protection (ALOP) and Food Safety Objective (FSO) concepts in food safety management, using Listeria monocytogenes in deli meats as a case study

NARCIS (Netherlands)

Gkogka, E.; Reij, M.W.; Gorris, L.G.M.; Zwietering, M.H.

2011-01-01

To establish a link between governmental food safety control and operational food safety management, the concepts of the Appropriate Level of Protection (ALOP) and the Food Safety Objective (FSO) have been suggested by international bodies as a means of making food safety control transparent and

Inactivated yellow fever 17D vaccine: development and nonclinical safety, immunogenicity and protective activity.

Science.gov (United States)

Monath, Thomas P; Lee, Cynthia K; Julander, Justin G; Brown, Alicja; Beasley, David W; Watts, Douglas M; Hayman, Edward; Guertin, Patrick; Makowiecki, Joseph; Crowell, Joseph; Levesque, Philip; Bowick, Gavin C; Morin, Merribeth; Fowler, Elizabeth; Trent, Dennis W

2010-05-14

In the last 10 years new concerns have arisen about safety of the live, attenuated yellow fever (YF) 17D vaccine, in particular viscerotropic adverse events, which have a case-fatality rate of 64%. A non-replicating cell culture-based vaccine would not cause these adverse events, and potentially could be used in persons with precautions or contraindications to use of the live vaccine, including age 60 years, egg allergy, immune suppression, and pregnancy. We developed a whole virion vaccine from the 17D strain inactivated with beta-propiolactone, and adsorbed to aluminum hydroxide. The inactivated vaccine was highly immunogenic in mice, hamsters, and cynomolgus macaques. After a single dose in hamsters and macaques, neutralizing antibody titers were similar to those elicited by the live 17D vaccine (YF-VAX, Sanofi Pasteur). After two doses of inactivated vaccine, neutralizing antibody titers in hamsters were significantly higher than after a single dose of YF-VAX [geometric mean titer (GMT) 20,480 vs. 1940, respectively (Pvaccine or a single dose of YF-VAX were fully protected against hepatitis, viremia, weight loss and death after challenge with YF virus (Jimenez strain). A clinical trial of the inactivated vaccine (XRX-001) has been initiated. Copyright 2010 Elsevier Ltd. All rights reserved.

Discussion about risk-informed regulations on the nuclear safety

International Nuclear Information System (INIS)

Gu Yeyi

2008-01-01

The article introduces the background and status quo of regulations on the nuclear safety in China, and points out the inadequacies existing with the current regulations. The author explains the risk-informed safety management concerning its development, status quo, and achievements made, in an attempt to make out the trend of improving regulations on the nuclear safety through risk-informed methods. Combining the U.S. development program of establishing risk-informed regulations on the nuclear safety, the author narrates principles and features of the new regulations system, and provides suggestions for the promotion of risk-informed safety management and establishment of risk-informed regulations on the nuclear safety. (author)

Automating the Generation of Heterogeneous Aviation Safety Cases

Science.gov (United States)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

Safety climate and firefighting: Focus group results.

Science.gov (United States)

DeJoy, David M; Smith, Todd D; Dyal, Mari-Amanda

2017-09-01

Firefighting is a hazardous occupation and there have been numerous calls for fundamental changes in how fire service organizations approach safety and balance safety with other operational priorities. These calls, however, have yielded little systematic research. As part of a larger project to develop and test a model of safety climate for the fire service, focus groups were used to identify potentially important dimensions of safety climate pertinent to firefighting. Analyses revealed nine overarching themes. Competency/professionalism, physical/psychological readiness, and that positive traits sometimes produce negative consequences were themes at the individual level; cohesion and supervisor leadership/support at the workgroup level; and politics/bureaucracy, resources, leadership, and hiring/promotion at the organizational level. A multi-level perspective seems appropriate for examining safety climate in firefighting. Safety climate in firefighting appears to be multi-dimensional and some dimensions prominent in the general safety climate literature also seem relevant to firefighting. These results also suggest that the fire service may be undergoing transitions encompassing mission, personnel, and its fundamental approach to safety and risk. These results help point the way to the development of safety climate measures specific to firefighting and to interventions for improving safety performance. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Safety culture: the concept and its practical application

International Nuclear Information System (INIS)

Edmondson, B.

1994-01-01

This paper draws together a number of topics concerned with safety culture: the first part of the paper describe the characteristics of an organisation giving rise to a good safety culture as suggested in INSAG-4. The second part of the paper examines sources of information on the characteristics of organisations giving rise to good and poor safety performance including a study into the causes of a number of recent severe accidents such as Clapham Junction and Piper Alpha. The final part of the paper describes the means by which safety culture within an organisation may be measured and therefore controlled. This enables an organisation to provide for a good safety culture and improve commercial performance by a process of continuous safety improvement eliminating the losses arising from poor safety standards. (author) 6 tabs., 5 refs

Safety in the design of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...

Safety in the redesigning of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...

Reflections on current nuclear safety problems

International Nuclear Information System (INIS)

Teillac, J.

1981-01-01

After operations totalling more than 2000 reactor-years, the safety balance is undeniably positive: no nuclear power plant in the world has so far caused significant damage to populations or to the environment. The paper reviews the darker and brighter aspects of recent analyses, in particular since the Harrisburg accident, and suggests three general lines of action: maintenance of a high level of technical competence in safety, systematic analysis of operational incidents and, finally, increased attention to the ''human factor'' as regards both the man/machine relationship and the training of personnel. With regard to the last-mentioned point, it is suggested that the greatest possible profit should be drawn from the tests carried out at the time of plant commissioning. International collaboration is particularly necessary both to ensure progress in the technical aspects of safety and to place the credibility of specialists on a firmer foundation. Finally, it is essential to assist countries which are embarking on nuclear power programmes. Nuclear safety is not always correctly perceived by public opinion, which will not definitively accept this new source of energy without having complete confidence in those who are promoting it. A clear and firm position on the part of those in positions of political responsibility is an important element in gaining public confidence. (author)

An Analysis of the Nurse Internship Program at Naval Medical Center San Diego

Science.gov (United States)

2003-03-01

for skin breakdown. • Identifies and describes appropriate interventions for patients at risk for nosocomial infections . • Identifies and describes...room, intensive care unit, emergency department, medical–surgical unit, maternal -child unit, and pediatrics. An extensive literature review...Clinical Orientation Safety, confidentiality, infection control, universal precautions Surgical Experience Intern follows a patient through

CNC Turning Center Advanced Operations. Computer Numerical Control Operator/Programmer. 444-332.

Science.gov (United States)

Skowronski, Steven D.; Tatum, Kenneth

This student guide provides materials for a course designed to introduce the student to the operations and functions of a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 presents course expectations and syllabus, covers safety precautions, and describes the CNC turning center components, CNC…

Notification of the commission on the eco-toxicity of chemical substances; Avis de la commission d'evaluation de l'ecotoxicite des substances chimiques

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The french commission on the evaluation of the chemical substances eco-toxicity, published recommendations concerning the use of additives for the automotive fuels, for the cooling circuit of electric power plants and for gases against fire. The risks for the public health are analysed and safety precautions are asked. (A.L.B.)

Controlled versus automatic processes: which is dominant to safety? The moderating effect of inhibitory control.

Directory of Open Access Journals (Sweden)

Yaoshan Xu

Full Text Available This study explores the precursors of employees' safety behaviors based on a dual-process model, which suggests that human behaviors are determined by both controlled and automatic cognitive processes. Employees' responses to a self-reported survey on safety attitudes capture their controlled cognitive process, while the automatic association concerning safety measured by an Implicit Association Test (IAT reflects employees' automatic cognitive processes about safety. In addition, this study investigates the moderating effects of inhibition on the relationship between self-reported safety attitude and safety behavior, and that between automatic associations towards safety and safety behavior. The results suggest significant main effects of self-reported safety attitude and automatic association on safety behaviors. Further, the interaction between self-reported safety attitude and inhibition and that between automatic association and inhibition each predict unique variances in safety behavior. Specifically, the safety behaviors of employees with lower level of inhibitory control are influenced more by automatic association, whereas those of employees with higher level of inhibitory control are guided more by self-reported safety attitudes. These results suggest that safety behavior is the joint outcome of both controlled and automatic cognitive processes, and the relative importance of these cognitive processes depends on employees' individual differences in inhibitory control. The implications of these findings for theoretical and practical issues are discussed at the end.

Psychological safety and error reporting within Veterans Health Administration hospitals.

Science.gov (United States)

Derickson, Ryan; Fishman, Jonathan; Osatuke, Katerine; Teclaw, Robert; Ramsel, Dee

2015-03-01

In psychologically safe workplaces, employees feel comfortable taking interpersonal risks, such as pointing out errors. Previous research suggested that psychologically safe climate optimizes organizational outcomes. We evaluated psychological safety levels in Veterans Health Administration (VHA) hospitals and assessed their relationship to employee willingness of reporting medical errors. We conducted an ANOVA on psychological safety scores from a VHA employees census survey (n = 185,879), assessing variability of means across racial and supervisory levels. We examined organizational climate assessment interviews (n = 374) evaluating how many employees asserted willingness to report errors (or not) and their stated reasons. Finally, based on survey data, we identified 2 (psychologically safe versus unsafe) hospitals and compared their number of employees who would be willing/unwilling to report an error. Psychological safety increased with supervisory level (P hospital (71% would report, 13% would not) were less willing to report an error than at the psychologically safe hospital (91% would, 0% would not). A substantial minority would not report an error and were willing to admit so in a private interview setting. Their stated reasons as well as higher psychological safety means for supervisory employees both suggest power as an important determinant. Intentions to report were associated with psychological safety, strongly suggesting this climate aspect as instrumental to improving patient safety and reducing costs.

Hazard Analysis and Safety Requirements for Small Drone Operations: To What Extent Do Popular Drones Embed Safety?

Science.gov (United States)

Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimihailidou, Maria Mikela

2018-03-01

Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this article presents: (1) a set of safety requirements generated from the application of the systems theoretic process analysis (STPA) technique on a generic small drone system; (2) a gap analysis between the set of safety requirements and the ones met by 19 popular drone models; (3) the extent of the differences between those models, their manufacturers, and the countries of origin; and (4) the association of drone prices with the extent they meet the requirements derived by STPA. The application of STPA resulted in 70 safety requirements distributed across the authority, manufacturer, end user, or drone automation levels. A gap analysis showed high dissimilarities regarding the extent to which the 19 drones meet the same safety requirements. Statistical results suggested a positive correlation between drone prices and the extent that the 19 drones studied herein met the safety requirements generated by STPA, and significant differences were identified among the manufacturers. This work complements the existing risk assessment frameworks for small drones, and contributes to the establishment of a commonly endorsed international risk analysis framework. Such a framework will support the development of a holistic and methodologically justified standardization scheme for small drone flights. © 2017 Society for Risk Analysis.

Innovation and Safety. A prestudy; Innovation och saekerhet. En foerstudie

Energy Technology Data Exchange (ETDEWEB)

Rollenhagen, Carl; Hansson, Sven Ove; Hortberg, Johan; Jakobsson, Fredrik; Zhau, Victoria Jing; Mojeri, Sara

2010-04-15

The project summarized in this report was initiated to explore relations between innovation and safety. The first two sections of the report discuss some previously conducted research and give a general background to the subject. It is concluded that safety research and innovation research, by and large, has developed as separate academic disciplines. The concepts of 'innovative safety culture' and 'safe innovation cultures' are suggested as two concepts that can be used to integrate research: innovative safety cultures depart from safety culture research but attempts to introduce an innovative dimension with the aim to create adaptive and innovative safety cultures that efficiently can handle risks arising from existing innovations. Safe innovation cultures have focus on innovation itself, but with the ambition to introduce concepts and methods from safety research in the innovative processes. Three subprojects conducted in the context of the present research are summarized. The first project examines how an existing organization (e.g. SKB - Swedish Nuclear Fuel and Waste Management) attempts to integrate both innovative activities and operative activities in the same organisation. Interviews with key personnel explored different views about how innovative and safety work coexists in the organisation. The second project focuses on how major retrofit projects of a nuclear power plant is managed in parallel to operative activities (e.g. operating the plant on an everyday basis). By means of an innovative technique (e.g. system groups) seminars were held to suggest improvements in the technical change process. The third project conducted a risk analysis of a major organisational change (e.g. control centres for energy distribution). Experiences from the three projects are finally discussed in terms of similarities and differences associated with the cultures for innovation and safety. Suggestions for further research are made

ESRS guidelines for software safety reviews. Reference document for the organization and conduct of Engineering Safety Review Services (ESRS) on software important to safety in nuclear power plants

International Nuclear Information System (INIS)

2000-01-01

made to help resolve any safety concerns, suggestions indicate useful changes that can enhance safety and good practices are singled out to serve as an example

Consumer anxieties about food grain safety in China

OpenAIRE

Jackson, P.A.; Zhu, H.; Wang, W.

2016-01-01

China has a long history of eating staple plant foods which are mainly derived from food grains, especially rice and wheat. Food grain safety has been a worrying challenge on health and nutrition grounds in China, although evidence clearly suggests that expanding agricultural production is linked to reducing undernourishment. The focus of this study is to investigate consumers' anxieties about food grain safety in China. The nature and extent of consumer anxieties about grain safety, the caus...

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 3. Aerobiology.

Science.gov (United States)

Bohannon, J Kyle; Janosko, Krisztina; Holbrook, Michael R; Barr, Jason; Pusl, Daniela; Bollinger, Laura; Coe, Linda; Hensley, Lisa E; Jahrling, Peter B; Wada, Jiro; Kuhn, Jens H; Lackemeyer, Matthew G

2016-10-03

Aerosol or inhalational studies of high-consequence pathogens have recently been increasing in number due to the perceived threat of intentional aerosol releases or unexpected natural aerosol transmission. Specific laboratories designed to perform these experiments require tremendous engineering controls to provide a safe and secure working environment and constant systems maintenance to sustain functionality. Class III biosafety cabinets, also referred to as gloveboxes, are gas-tight enclosures with non-opening windows. These cabinets are maintained under negative pressure by double high-efficiency-particulate-air (HEPA)-filtered exhaust systems and are the ideal primary containment for housing aerosolization equipment. A well planned workflow between staff members within high containment from, for instance, an animal biosafety level-4 (ABSL-4) suit laboratory to the ABSL-4 cabinet laboratory is a crucial component for successful experimentation. For smooth study execution, establishing a communication network, moving equipment and subjects, and setting up and placing equipment, requires staff members to meticulously plan procedures prior to study initiation. Here, we provide an overview and a visual representation of how aerobiology research is conducted at the National Institutes of Health, National Institute of Allergy and Infectious Diseases Integrated Research Facility at Fort Detrick, Maryland, USA, within an ABSL-4 environment.

Microbiological safety of mayonnaise, salad dressings, and sauces produced in the United States: a review.

Science.gov (United States)

Smittle, R B

2000-08-01

The literature on the death and survival of foodborne pathogens in commercial mayonnaise, dressing, and sauces was reviewed and statistically analyzed with emphasis on Salmonella, Escherichia coli O157:H7, and Listeria monocytogenes. The absence of reports of foodborne illness associated directly with the consumption of commercially prepared acidic dressings and sauces is evidence of their safety. Salmonella, E. coli O157:H7, E. coli, L. monocytogenes, Staphylococcus aureus, and Yersinia enterocolitica die when inoculated into mayonnaise and dressings. Historically, mayonnaise and dressings have been exempt from the acidified food regulations and have justly deserved this status due primarily to the toxic effect of acetic and to a lesser extent lactic and citric acids. These organic acids are inimical to pathogenic bacteria and are effective natural preservatives with acetic being the most effective in killing pathogenic bacteria at the pH values encountered in these products. Statistical analysis on data reported in the literature shows that the most important and significant factor in destroying pathogenic bacteria is pH as adjusted with acetic acid followed by the concentration of acetic acid in the water phase. The reported highest manufacturing target pH for dressings and sauces is 4.4, which is below the 4.75 pKa of acetic acid and below the reported inhibitory pH of 4.5 for foodborne pathogens in the presence of acetic acid. The overall conclusion is that these products are very safe. They should remain exempt from the acidified food regulations providing adequate research has been done to validate their safety, and the predominant acid is acetic and reasonable manufacturing precautions are taken.

Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

OpenAIRE

Ong Choon Hee

2014-01-01

The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

Hypnosis, suggestion, and suggestibility: an integrative model.

Science.gov (United States)

Lynn, Steven Jay; Laurence, Jean-Roch; Kirsch, Irving

2015-01-01

This article elucidates an integrative model of hypnosis that integrates social, cultural, cognitive, and neurophysiological variables at play both in and out of hypnosis and considers their dynamic interaction as determinants of the multifaceted experience of hypnosis. The roles of these variables are examined in the induction and suggestion stages of hypnosis, including how they are related to the experience of involuntariness, one of the hallmarks of hypnosis. It is suggested that studies of the modification of hypnotic suggestibility; cognitive flexibility; response sets and expectancies; the default-mode network; and the search for the neurophysiological correlates of hypnosis, more broadly, in conjunction with research on social psychological variables, hold much promise to further understanding of hypnosis.

Low-cost safety enhancements for stop-controlled and signalized intersections

Science.gov (United States)

2009-05-01

The purpose of this document is to present information on suggested effective, low-cost intersection countermeasures developed using intersection safety research results and input from an intersection safety expert panel. These low-cost countermeasur...

Revisiting the safety of aspartame.

Science.gov (United States)

Choudhary, Arbind Kumar; Pretorius, Etheresia

2017-09-01

Aspartame is a synthetic dipeptide artificial sweetener, frequently used in foods, medications, and beverages, notably carbonated and powdered soft drinks. Since 1981, when aspartame was first approved by the US Food and Drug Administration, researchers have debated both its recommended safe dosage (40 mg/kg/d) and its general safety to organ systems. This review examines papers published between 2000 and 2016 on both the safe dosage and higher-than-recommended dosages and presents a concise synthesis of current trends. Data on the safe aspartame dosage are controversial, and the literature suggests there are potential side effects associated with aspartame consumption. Since aspartame consumption is on the rise, the safety of this sweetener should be revisited. Most of the literature available on the safety of aspartame is included in this review. Safety studies are based primarily on animal models, as data from human studies are limited. The existing animal studies and the limited human studies suggest that aspartame and its metabolites, whether consumed in quantities significantly higher than the recommended safe dosage or within recommended safe levels, may disrupt the oxidant/antioxidant balance, induce oxidative stress, and damage cell membrane integrity, potentially affecting a variety of cells and tissues and causing a deregulation of cellular function, ultimately leading to systemic inflammation. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Implementation of ICRP-60, BBS-115 and the patient directives in radiation safety regulations of TAEK

International Nuclear Information System (INIS)

Okyar, H.B.; Vural, M.

2001-01-01

The use of radiation sources offers a wide range of benefits throughout the world in medicine, research and industry. Precautions are, however, necessary in order to limit the exposure of persons to the radiation that is emitted. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) were published as IAEA Safety Series No 115 in 1996. This publication marks the culmination of efforts that have continued over the past decades towards harmonization of radiation protection and safety standards internationally. The purpose of the Standards is to establish basic requirements for the protection against the risks associated with exposure to ionizing radiation and for the safety of radiation sources that may deliver such exposure. The Standards are based primarily on the recommendations of the ICRP which is a non-governmental scientific organization to establish basic principles and recommendations for radiation protection; the most recent recommendations of the ICRP were issued in 1991. In 1997, the Council of the European Union published a new directive laying down the general principles of the radiation protection of individuals undergoing exposures to ionizing radiations related to medical exposures (Directive 97/43 Euratom). Directive 97/43 Euratom is a supplement to Directive 96/29 Euratom on the basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionizing radiations. The European Directives 96/29-97/43 Euratom and BSS-115 constitute a complete and coherent set of regulatory measures on radiation protection. In Turkey, the infrastructure exists to account for ionizing radiation sources by, for example, a system of licensing, legislative requirements on the user to keep appropriate records and perhaps to report to the TAEK on a periodic basis or, in the case of imported items (including re-export procedures) and customs

Nuclear safety culture and nuclear safety supervision

International Nuclear Information System (INIS)

Chai Jianshe

2013-01-01

In this paper, the author reviews systematically and summarizes up the development process and stage characteristics of nuclear safety culture, analysis the connotation and characteristics of nuclear safety culture, sums up the achievements of our country's nuclear safety supervision, dissects the challenges and problems of nuclear safety supervision. This thesis focused on the relationship between nuclear safety culture and nuclear safety supervision, they are essential differences, but there is a close relationship. Nuclear safety supervision needs to introduce some concepts of nuclear safety culture, lays emphasis on humanistic care and improves its level and efficiency. Nuclear safety supervision authorities must strengthen nuclear safety culture training, conduct the development of nuclear safety culture, make sure that nuclear safety culture can play significant roles. (author)

Safety and Toxicology of Cannabinoids.

Science.gov (United States)

Sachs, Jane; McGlade, Erin; Yurgelun-Todd, Deborah

2015-10-01

There is extensive research on the safety, toxicology, potency, and therapeutic potential of cannabis. However, uncertainty remains facilitating continued debate on medical and recreational cannabis policies at the state and federal levels. This review will include a brief description of cannabinoids and the endocannabinoid system; a summary of the acute and long-term effects of cannabis; and a discussion of the therapeutic potential of cannabis. The conclusions about safety and efficacy will then be compared with the current social and political climate to suggest future policy directions and general guidelines.

Ethical aspects of radioactive waste disposal. Waste producer, responsible party, persons concerned; Ethische Aspekte der Entsorgung radioaktiver Abfaelle. Verursacher, Verantwortliche, Betroffene

Energy Technology Data Exchange (ETDEWEB)

Kamp, Georg [EA / European Academy GmbH, Bad Neuenahr-Ahrweiler (Germany)

2014-07-01

In the frame of the Gorleben memorandum the discussion on ethical aspects in connection with radioactive waste disposal has evolved. The controlled disposal includes the so called ''polluter pays principle''. Problems arise with the search for a final repository site with respect to future generations, the interests of Inhabitants and neighboring countries. A delayed decision might avoid overhasty compromises that could reduce adequate safety measures for future generations. The best possible precautions for safety and accident prevention are required.

Perinatal safety: from concept to nursing practice.

Science.gov (United States)

Lyndon, Audrey; Kennedy, Holly Powell

2010-01-01

Communication and teamwork problems are leading causes of documented preventable adverse outcomes in perinatal care. An essential component of perinatal safety is the organizational culture in which clinicians work. Clinicians' individual and collective authority to question the plan of care and take action to change the direction of a clinical situation in the patient's best interest can be viewed as their "agency for safety." However, collective agency for safety and commitment to support nurses in their role of advocacy is missing in many perinatal care settings. This article draws from Organizational Accident Theory, High Reliability Theory, and Symbolic Interactionism to describe the nurse's role in maintaining safety during labor and birth in acute care settings and suggests actions for supporting the perinatal nurse at individual, group, and systems levels to achieve maximum safety in perinatal care.

Perinatal Safety: From Concept to Nursing Practice

Science.gov (United States)

Kennedy, Holly Powell

2010-01-01

Communication and teamwork problems are leading causes of documented preventable adverse outcomes in perinatal care. An essential component of perinatal safety is the organizational culture in which clinicians work. Clinicians’ individual and collective authority to question the plan of care and take action to change the direction of a clinical situation in the patient’s best interest can be viewed as their “agency for safety.” However, collective agency for safety and commitment to support nurses in their advocacy role is missing in many perinatal care settings. This paper draws from Organizational Accident Theory, High Reliability Theory, and Symbolic Interactionism to describe the nurse’s role in maintaining safety during labor and birth in acute care settings, and suggests actions for supporting the perinatal nurse at individual, group, and systems levels to achieve maximum safety in perinatal care. PMID:20147827

Safety balance: Analysis of safety systems

International Nuclear Information System (INIS)

Delage, M.; Giroux, C.

1990-12-01

Safety analysis, and particularly analysis of exploitation of NPPs is constantly affected by EDF and by the safety authorities and their methodologies. Periodic safety reports ensure that important issues are not missed on daily basis, that incidents are identified and that relevant actions are undertaken. French safety analysis method consists of three principal steps. First type of safety balance is analyzed at the normal start-up phase for each unit including the final safety report. This enables analysis of behaviour of units ten years after their licensing. Second type is periodic operational safety analysis performed during a few years. Finally, the third step consists of safety analysis of the oldest units with the aim to improve the safety standards. The three steps of safety analysis are described in this presentation in detail with the aim to present the objectives and principles. Examples of most recent exercises are included in order to illustrate the importance of such analyses

A Computer Program for Assessing Nuclear Safety Culture Impact

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

2014-10-15

Through several accidents of NPP including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, a lack of safety culture was pointed out as one of the root cause of these accidents. Due to its latent influences on safety performance, safety culture has become an important issue in safety researches. Most of the researches describe how to evaluate the state of the safety culture of the organization. However, they did not include a possibility that the accident occurs due to the lack of safety culture. Because of that, a methodology for evaluating the impact of the safety culture on NPP's safety is required. In this study, the methodology for assessing safety culture impact is suggested and a computer program is developed for its application. SCII model which is the new methodology for assessing safety culture impact quantitatively by using PSA model. The computer program is developed for its application. This program visualizes the SCIs and the SCIIs. It might contribute to comparing the level of the safety culture among NPPs as well as improving the management safety of NPP.

Assessment of the safety of injection practices and injection-related procedures in family health units and centers in Alexandria.

Science.gov (United States)

Elhoseeny, Taghareed A; Mourad, Juidan K

2014-08-01

patients and providers include inadequate injection safety training and incomplete hepatitis B vaccination of healthcare providers. Indicators that may reflect risk to providers include nonadherence to safety precautions related to injection practices, such as inadequate access to heavy gloves by staff handling healthcare waste.

Assessing the relationship between patient safety culture and EHR strategy.

Science.gov (United States)