AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT

Energy Technology Data Exchange (ETDEWEB)

Potts, T. Todd; Hylko, James M.; Douglas, Terence A.

2003-02-27

WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHA then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment

Application of Modern Tools and Techniques for Mine Safety & Disaster Management

Science.gov (United States)

Kumar, Dheeraj

2016-04-01

The implementation of novel systems and adoption of improvised equipment in mines help mining companies in two important ways: enhanced mine productivity and improved worker safety. There is a substantial need for adoption of state-of-the-art automation technologies in the mines to ensure the safety and to protect health of mine workers. With the advent of new autonomous equipment used in the mine, the inefficiencies are reduced by limiting human inconsistencies and error. The desired increase in productivity at a mine can sometimes be achieved by changing only a few simple variables. Significant developments have been made in the areas of surface and underground communication, robotics, smart sensors, tracking systems, mine gas monitoring systems and ground movements etc. Advancement in information technology in the form of internet, GIS, remote sensing, satellite communication, etc. have proved to be important tools for hazard reduction and disaster management. This paper is mainly focused on issues pertaining to mine safety and disaster management and some of the recent innovations in the mine automations that could be deployed in mines for safe mining operations and for avoiding any unforeseen mine disaster.

Laser safety tools and training

CERN Document Server

Barat, Ken

2008-01-01

Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

Pickering tool management system

International Nuclear Information System (INIS)

Wong, E.H.; Green, A.H.

1997-01-01

Tools were being deployed in the station with no process in effect to ensure that they are maintained in good repair so as to effectively support the performance of Maintenance activities. Today's legal requirements require that all employers have a process in place to ensure that tools are maintained in a safe condition. This is specified in the Ontario Health and Safety Act. The Pickering Tool Management System has been chosen as the process at Pickering N.D to manage tools. Tools are identified by number etching and bar codes. The system is a Windows application installed on several file servers

Survey on the use of configuration risk and safety management tools at nuclear power plants. Final report

International Nuclear Information System (INIS)

Fleming, K.N.; Read, J.W.; Dagan, W.J.; Bidwell, D.A.

1998-09-01

In order to provide input to Electricite de France's (EDF) evaluation of the use of configuration safety and risk management tools in the French plants and to collect information to guide the EPRI efforts to provide useful tools for the EPRI member utilities and international partners, a joint effort to survey US and selected non-US nuclear power stations was conducted. This survey examined the use of various approaches, techniques, and software tools that are being used to evaluate the safety and risk aspects of plant configuration changes and configuration changes during plant outages as well as during power operation. The use of these tools has increased in recent years as a result of efforts to optimize plant maintenance programs, improve plant safety, and increase plant reliability and availability. This report provides the results of the survey of 37 organizations covering 54 nuclear plant sites and 97 reactor units

Safety-barrier diagrams as a tool for modelling safety of hydrogen applications

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Markert, Frank

2009-01-01

Safety-barrier diagrams have proven to be a useful tool in documenting the safety measures taken to prevent incidents and accidents in process industry. Especially during the introduction of new hydrogen technologies or applications, as e.g. hydrogen refuelling stations, safety-barrier diagrams...... are considered a valuable supplement to other traditional risk analysis tools to support the communication with authorities and other stakeholders during the permitting process. Another advantage of safety-barrier diagrams is that they highlight the importance of functional and reliable safety barriers in any...... system and here is a direct focus on those barriers that need to be subject to safety management in terms of design and installation, operational use, inspection and monitoring, and maintenance. Safety-barrier diagrams support both quantitative and qualitative approaches. The paper will describe...

Safety management: a few techniques and their application

International Nuclear Information System (INIS)

Soundararajan, S.

2016-01-01

Industrial safety practice has grown in its stature tremendously since the age of industrial revolution. A number of modern techniques are available to strengthen design safety features, to review operational safety, and to critically appraise and upgrade practices of occupational safety and health management. This talk focuses on three prominent yet simple techniques and their usefulness in the overall safety management of a workplace. Any industrial set-up undergoes different stages in its life cycle-conceptual design, actual design, construction, fabrication and installation, commissioning, operation, shutdown/re-start up and decommissioning. Checklist procedure is a safety tool that can be applied at any of these stages. Thus it is a quite useful technique in safety management and accident prevention. It can serve as a form of approval from one step to another in the course of any routine or specific task. Safety Audit or Safety Review is a critical safety management appraisal tool. It gives a reasonable indication of how well a company's safety programme works, how hazards are recognised, how well employees are motivated and so on. It gives a clear picture about where a company stands as far as framing and implementation of its SHE policy is concerned. Each of the above tools is complementing each other and required to be applied at appropriate juncture in sustaining good safety management system at the workplace

Human factors in safety and business management.

Science.gov (United States)

Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

2010-02-01

Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is

INTEGRATED SAFETY MANAGEMENT SYSTEM IN AIR TRAFFIC SERVICES

Directory of Open Access Journals (Sweden)

Volodymyr Kharchenko

2014-06-01

Full Text Available The article deals with the analysis of the researches conducted in the field of safety management systems.Safety management system framework, methods and tools for safety analysis in Air Traffic Control have been reviewed.Principles of development of Integrated safety management system in Air Traffic Services have been proposed.

Safety management - policy, analysis and implementation

International Nuclear Information System (INIS)

Allen, F.R.

1993-01-01

The nuclear industry is moving towards a period of ever increasing emphasis on business performance and profitability. Safety has, of course, always been a major concern of management in the nuclear industry and elsewhere. The civil aviation industry , for example, has had a similar concern for safety. Other industry sectors are also developing safety management as a response to events within and outside their sectors. In this paper the way that the risk management process as a whole is being addressed is looked at. Can we use risk management, initially a safety-orientated tool, to improve business performance? (author)

Development of a numerical tool for safety assessment and emergency management of experimental reactors

International Nuclear Information System (INIS)

Maas, L.; Beuter, A.; Seropian, C.

2010-01-01

The Institute of Radiological Protection and Nuclear Safety (IRSN) acts as technical support to French public authorities. Among its duties, one important item is to provide help for emergency situations management in case of an accident occurring in a French nuclear facility. In this framework, IRSN develops and applies numerical tools dealing with containment management issues. Up to now IRSN has not got any specific tool for experimental reactors. Accordingly, it has been then decided to extend the ASTEC code, devoted to severe accident scenarios for Pressurized Water Reactors, to this kind of reactors. This lumped-parameter code, co-developed by IRSN and GRS (Germany), covers the entire phenomenology from the initiating event up to fission products release outside the reactor containment, except for the steam explosion and the mechanical integrity of the containment. A first application to experimental reactors was carried out to assess the High Flux Reactor (HFR) operator's improvement proposal concerning the containment management during accidental situations. This reactor, located in Grenoble (France), is composed of a double wall containment with a pressurized containment annulus preventing any direct leakage into the environment. Until now, in case of severe accidents (mainly core melting in pool, explosive reactivity accident called BORAX), the HFR emergency management consisted in isolating the containment building in the early stage of the accident, to prevent any radioactive products release to the environment. The operator decided to improve this containment management during accidental situations by using an air filtering venting system able to maintain a slight sub-atmospheric pressure in the reactor building. The operator's demonstration of the efficiency of this new system is mainly based on containment pressure evaluations during accidental transients. IRSN assessed these calculations through ASTEC calculations. Finally, a global agreement was

A web-based tool for the Comprehensive Unit-based Safety Program (CUSP).

Science.gov (United States)

Pronovost, Peter J; King, Jay; Holzmueller, Christine G; Sawyer, Melinda; Bivens, Shauna; Michael, Michelle; Haig, Kathy; Paine, Lori; Moore, Dana; Miller, Marlene

2006-03-01

An organization's ability to change is driven by its culture, which in turn has a significant impact on safety. The six-step Comprehensive Unit-Based Safety Program (CUSP) is intended to improve local culture and safety. A Web-based project management tool for CUSP was developed and then pilot tested at two hospitals. HOW ECUSP WORKS: Once a patient safety concern is identified (step 3), a unit-level interdisciplinary safety committee determines issue criticality and starts up the projects (step 4), which are managed using project management tools within eCUSP (step 5). On a project's completion, the results are disseminated through a shared story (step 6). OSF St. Joseph's Medical Center-The Medical Birthing Center (Bloomington, Illinois), identified 11 safety issues, implemented 11 projects, and created 9 shared stories--including one for its Armband Project. The Johns Hopkins Hospital (Baltimore) Medical Progressive Care (MPC4) Unit identified 5 safety issues and implemented 4 ongoing projects, including the intravenous (IV) Tubing Compliance Project. The eCUSP tool's success depends on an organizational commitment to creating a culture of safety.

A tool for safety evaluations of road improvements.

Science.gov (United States)

Peltola, Harri; Rajamäki, Riikka; Luoma, Juha

2013-11-01

Road safety impact assessments are requested in general, and the directive on road infrastructure safety management makes them compulsory for Member States of the European Union. However, there is no widely used, science-based safety evaluation tool available. We demonstrate a safety evaluation tool called TARVA. It uses EB safety predictions as the basis for selecting locations for implementing road-safety improvements and provides estimates of safety benefits of selected improvements. Comparing different road accident prediction methods, we demonstrate that the most accurate estimates are produced by EB models, followed by simple accident prediction models, the same average number of accidents for every entity and accident record only. Consequently, advanced model-based estimates should be used. Furthermore, we demonstrate regional comparisons that benefit substantially from such tools. Comparisons between districts have revealed significant differences. However, comparisons like these produce useful improvement ideas only after taking into account the differences in road characteristics between areas. Estimates on crash modification factors can be transferred from other countries but their benefit is greatly limited if the number of target accidents is not properly predicted. Our experience suggests that making predictions and evaluations using the same principle and tools will remarkably improve the quality and comparability of safety estimations. Copyright © 2013 Elsevier Ltd. All rights reserved.

Operational safety performance indicator system - a management tool for the self assessment of safety and reliability of nuclear power plants

International Nuclear Information System (INIS)

Anil Kumar; Mandowara, S.L.; Mittal, S.

2006-01-01

Operational Safety Performance Indicator system is one of the self assessment tools for station management to monitor safety and reliability of nuclear power plants. It provides information to station management about the performance of various areas of the plants by means of different colours of relevant performance indicators. Such systems have been implemented at many nuclear power plants in the world and have been considered as strength during WANO Peer Review. IAEA had a Coordinated Research Programme (CRP) on this with several countries participating including India. In NPCIL this system has been implemented in KAPS about a year back and found very useful in identifying areas which needs to be given more attention. Based on the KAPS feedback Implementation of this system has been taken up in RAPS-3 and 4 and KGS-l and 2. (author)

Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

Science.gov (United States)

Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

2008-05-01

Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

A tool for assessment of animal health laboratory safety and biosecurity: The safety module of the Food and Agriculture Organization’s laboratory mapping tool

OpenAIRE

Mouillé, B; Dauphin, G; Wiersma, L; Blacksell, SD; Claes, F; Kalpravidh, W; Kabore, Y; Hietala, S

2018-01-01

The Laboratory Management Tool (LMT) is a standardized spreadsheet-based assessment tool developed to help support national, regional, and global efforts to maintain an effective network of animal health and veterinary public health laboratories. The safety and biosecurity module of the LMT (LMT-S) includes 98 measures covering administrative, operational, engineering, and personal protective equipment practices used to provide laboratory safety and biosecurity. Performance aspects of laborat...

Safety Culture Assessment Tools in Nuclear and Non-Nuclear Domains

International Nuclear Information System (INIS)

Mkrtchyan, L.; Turcanu, C.

2012-01-01

Over the last decades, in many domains especially in high risk industries, the authorities paid increasing attention to safety management systems and, in particular, to safety culture. Consequently, in the applied and academic literature a huge amount of studies explored the main challenges, issues and obstacles related with safety culture. We undertake a survey of safety culture experiences in the main safety-critical industries such as nuclear, railways, offshore, aviation, airlines, health care, etc. We review both academic and applied literature up to the year 2011. Our results help to establish a comprehensive view on the subject, its main terminologies, existing tools, and main difficulties. The purpose of this report is to raise awareness about the current tools of safety culture assessment, both in the nuclear as well as in the non-nuclear domain. The report provides also practical recommendations about the possible use of each tool given different circumstances and different factors. We do not aim to rank the tools pointing the best one, but we highlight instead the unique features of these tools, pointing their strong and weak sides

Safety Culture Assessment Tools in Nuclear and Non-Nuclear Domains

Energy Technology Data Exchange (ETDEWEB)

Mkrtchyan, L; Turcanu, C

2012-03-15

Over the last decades, in many domains especially in high risk industries, the authorities paid increasing attention to safety management systems and, in particular, to safety culture. Consequently, in the applied and academic literature a huge amount of studies explored the main challenges, issues and obstacles related with safety culture. We undertake a survey of safety culture experiences in the main safety-critical industries such as nuclear, railways, offshore, aviation, airlines, health care, etc. We review both academic and applied literature up to the year 2011. Our results help to establish a comprehensive view on the subject, its main terminologies, existing tools, and main difficulties. The purpose of this report is to raise awareness about the current tools of safety culture assessment, both in the nuclear as well as in the non-nuclear domain. The report provides also practical recommendations about the possible use of each tool given different circumstances and different factors. We do not aim to rank the tools pointing the best one, but we highlight instead the unique features of these tools, pointing their strong and weak sides.

MIDAS: an effective tool for work management

International Nuclear Information System (INIS)

Ball, D.L.; Billings, M.P.; McCargar, S.B.; Talbot, M.D.; Topping, C.F.

1985-01-01

The computerized Master Information Data Acquisition System (MIDAS) is used to control work at facilities that support the Liquid Metal Reactor (LMR) program on the Hanford Site at Richland, Washington. Functions of this software system are to: track authorized maintenance activities, enhance operational safety, track schedule, manpower, and material constraints during work preparation, provide a management tool for quality measurement techniques, and provide an overall repository for technical and safety-related information on components at the Hanford Site 400 Area facilities. This paper describes MIDAS and how it is used as a work management tool. 1 fig

Pushing and pulling: an assessment tool for occupational health and safety practitioners.

Science.gov (United States)

Lind, Carl Mikael

2018-03-01

A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator's health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.

Navigation Tools and Equipment and How They Have Improved Aviation Safety

OpenAIRE

Sulaiman D. S Alsahli FadalahassanALfadala

2017-01-01

This paper highlights the impact of navigation tools and equipment, such as the GPS, navigation radar, and other communications tools, which aid in ensuring aviation safety. It emphasizes the need for aviation safety and how these navigation methods are of great help to reduce the hazards and clearly indicate the problems related to the aircraft, aircraft traffic management, weather disturbances, among others. It also recommends how these tools and equipment must be further developed to promo...

Tools to quantify safety culture

International Nuclear Information System (INIS)

Avella, B.

2011-01-01

This paper reviews the notion of safety culture and then describes some of the tools that can be used to assess it. Required characteristics to obtain reliable tools and techniques are provided, along with a short summary of the most common and important tools and techniques used to assess safety culture at the nuclear field is described. At the end of this paper, the reader will better understand the importance of the safety culture of the organization and will have requirements to help him in choosing reliable tools and techniques. Further, there will be recommendations on how best to follow-up after an assessment of safety culture. (author)

Outage Risk Assessment and Management (ORAM) technology to improve outage safety and economics

International Nuclear Information System (INIS)

Kalra, S.P.

2004-01-01

The Electric Power Research Institute (EPRI) has undertaken an aggressive program, called ORAM (Outage Risk Assessment and Management), to provide utilities with tools and technology to assist in managing risk during the planning and conduct of outages. The ORAM program consists of the following 6 steps: i) Perform utility surveys and visits on shutdown risk management needs, ii) Perform probabilistic shutdown safety assessments (PSSAs) to identify generic insights that can be incorporated into risk management guidelines and identify selected areas for the development of contingency actions, iii) Develop risk management guidelines (RMG's) that provide a systematic approach to the planning and conduct of outages from a safety perspective. Incorporate insights from the shutdown safety assessments and other operating experience into the RMG's. iv) Develop selected contingency actions including a thermalhydraulic tool kit to address higher risk time periods and activities identified in the shutdown safety assessments, v) Develop computer software that integrates all of the above capability into an easy to use tool for effective shutdown operation management for utilities, vi) Provide assistance in the transfer of this technology and the application of these tools. This paper briefly describes the technical approach and tools developed under EPRI's ORAM program and its applications for improving outage safety and economics. (author)

Safety indicators: an efficient tool for a better safety

International Nuclear Information System (INIS)

Aufort, P.; Lars, R.

1993-01-01

Safety indicators based on the examination of the Operating Technical Specifications have been defined with the aim of following the in-operation safety level of French nuclear power plants. These safety indicators are operation feedback tools which permit the a posteriori justification and the adjustment of actual procedures. They would allow detection of an abnormal unavailability occurrence rate or a situation revealing a potential safety problem. So, data acquisition, processing, analysis and display software allowing trend analysis of these indicators has been developed so far as: a reflexion tool for the power plant operators about the safety instructions and the adjustment of preventive maintenance, and a help for decision making at a national level for the examination and the improvement of Operating Technical Specifications. This paper presents the objectives of these safety indicators, the processing tool associated, the preliminary results obtained and more elaborate processing of these indicators. These safety indicators may be very useful in framing probabilistic safety assessments. (author)

Assessment and applicability of evaluation tools: Current practice in a sample of European countries and steps towards a state-of-the-art approach. Road Infrastructure Safety Management Evaluation Tools (RISMET), Deliverables No. 4 and 5.

NARCIS (Netherlands)

Elvik, R.

2014-01-01

This report surveys current practice in a sample of European countries with respect to the use of ten different tools for safety management of road systems. The report also proposes steps that can be taken to bring the use of these management tools closer to their state-of-the-art versions. These

Methodology for Safety Assessment Applied to Predisposal Waste Management. Report of the Results of the International Project on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) 2004–2010)

International Nuclear Information System (INIS)

2015-12-01

Report of the Results of the International Project on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) (2004–2010) The IAEA’s progamme on Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) focused on approaches and mechanisms for application of safety assessment methodologies for the predisposal management of radioactive waste. The initial outcome of the SADRWMS Project was achieved through the development of flowcharts, which have since been incorporated into IAEA Safety Standards Series No. GSG-3, Safety Case and Safety Assessment for Predisposal Management of Radioactive Waste. In 2005, an initial specification was developed for the Safety Assessment Framework (SAFRAN) software tool to apply the SADRWMS flowcharts. In 2008, an in-depth application of the SAFRAN tool and the SADRWMS methodology was carried out on the predisposal management facilities of the Thailand Institute of Nuclear Technology Radioactive Waste Management Centre (TINT Facility). This publication summarizes the content and outcomes of the SADRWMS programme. The Chairman’s Report of the SADRWMS Project and the Report of the TINT test case are provided on the CD-ROM which accompanies this report

Integrating environment health and safety management at Petro-Canada

International Nuclear Information System (INIS)

Raymond, G.

1993-01-01

Petro-Canada has developed a tool to integrate, measure, and improve its management systems of environment, health, and safety (EH ampersand S). This tool, called the Total Loss Management System, is described in the areas of general management issues, policies and procedures, evaluations, organization, stewardship, issue management, and performance measures. Petro-Canada's policies on occupational health and safety are consistent with its environmental policy, being structured in the same way. An integrated audit system is used to cover health, safety, industrial hygiene, reliability, environment, and risk management. EH ampersand S matters are integrated at the corporate level in a separate department. Regional divisions review EH ampersand S performance every month, incidents are discussed, and preventive measures are taken as necessary. Regional performances are combined every quarter for ultimate presentation to the Petro-Canada board. New or emerging issues that may affect divisions are assigned an issue sponsor, a member of divisional management who makes sure the issue receives the resources necessary to study and define its impact. Examples of issues include soil contamination, process hazard management, and benzene exposure limits. Performance measures flow from the corporate environment and occupational health and safety policies, and come in two types: those that measure activities to improve performance and those that measure the outcome of the activities

Use of information technologies to contribute for optimizing the safety radiation management in Cuba

International Nuclear Information System (INIS)

Valdes Ramos, M.; Prendes Alonso, M.; Hernandez Saiz, A.; Manzano de Armas, J.

2013-01-01

This paper presents the results achieved in Cuba, with the development of a group of information management tools to implement radiation safety systemic and proactive approaches to safety and ICT supported. These tools were designed for different organisms with responsibility for the security at the country level, to the regulatory authority, for user entities, for individual monitoring services and other radiation protection services. It describes the philosophy of information management model used, the characteristics of the developed tools and their integration, the work performed for the homogenization of information available and the ability to capture and deliver data at different levels in decision making. The tools developed are based on the use of variables and indicators of importance to the safety and the systemic approach adopted allows to facilitate the optimization process for supervision of safety practices as well as contribute to the management of knowledge in radiation safety, through a synergistic combination of process data, information, information management systems, and the creative and innovative radiation safety experts

Food safety performance indicators to benchmark food safety output of food safety management systems.

Science.gov (United States)

Jacxsens, L; Uyttendaele, M; Devlieghere, F; Rovira, J; Gomez, S Oses; Luning, P A

2010-07-31

There is a need to measure the food safety performance in the agri-food chain without performing actual microbiological analysis. A food safety performance diagnosis, based on seven indicators and corresponding assessment grids have been developed and validated in nine European food businesses. Validation was conducted on the basis of an extensive microbiological assessment scheme (MAS). The assumption behind the food safety performance diagnosis is that food businesses which evaluate the performance of their food safety management system in a more structured way and according to very strict and specific criteria will have a better insight in their actual microbiological food safety performance, because food safety problems will be more systematically detected. The diagnosis can be a useful tool to have a first indication about the microbiological performance of a food safety management system present in a food business. Moreover, the diagnosis can be used in quantitative studies to get insight in the effect of interventions on sector or governmental level. Copyright 2010 Elsevier B.V. All rights reserved.

Engineered nanomaterials: toward effective safety management in research laboratories.

Science.gov (United States)

Groso, Amela; Petri-Fink, Alke; Rothen-Rutishauser, Barbara; Hofmann, Heinrich; Meyer, Thierry

2016-03-15

It is still unknown which types of nanomaterials and associated doses represent an actual danger to humans and environment. Meanwhile, there is consensus on applying the precautionary principle to these novel materials until more information is available. To deal with the rapid evolution of research, including the fast turnover of collaborators, a user-friendly and easy-to-apply risk assessment tool offering adequate preventive and protective measures has to be provided. Based on new information concerning the hazards of engineered nanomaterials, we improved a previously developed risk assessment tool by following a simple scheme to gain in efficiency. In the first step, using a logical decision tree, one of the three hazard levels, from H1 to H3, is assigned to the nanomaterial. Using a combination of decision trees and matrices, the second step links the hazard with the emission and exposure potential to assign one of the three nanorisk levels (Nano 3 highest risk; Nano 1 lowest risk) to the activity. These operations are repeated at each process step, leading to the laboratory classification. The third step provides detailed preventive and protective measures for the determined level of nanorisk. We developed an adapted simple and intuitive method for nanomaterial risk management in research laboratories. It allows classifying the nanoactivities into three levels, additionally proposing concrete preventive and protective measures and associated actions. This method is a valuable tool for all the participants in nanomaterial safety. The users experience an essential learning opportunity and increase their safety awareness. Laboratory managers have a reliable tool to obtain an overview of the operations involving nanomaterials in their laboratories; this is essential, as they are responsible for the employee safety, but are sometimes unaware of the works performed. Bringing this risk to a three-band scale (like other types of risks such as biological, radiation

A Tool for Assessment of Animal Health Laboratory Safety and Biosecurity: The Safety Module of the Food and Agriculture Organization’s Laboratory Mapping Tool

Directory of Open Access Journals (Sweden)

Beatrice Mouillé

2018-03-01

Full Text Available The Laboratory Management Tool (LMT is a standardized spreadsheet-based assessment tool developed to help support national, regional, and global efforts to maintain an effective network of animal health and veterinary public health laboratories. The safety and biosecurity module of the LMT (LMT-S includes 98 measures covering administrative, operational, engineering, and personal protective equipment practices used to provide laboratory safety and biosecurity. Performance aspects of laboratory infrastructure and technical compliance considered fundamental for ensuring that a laboratory is able to appropriately function in a safe and biosecure manner are systematically queried and scored for compliance on a four-point scale providing for a semi-quantitative assessment. Data collected is used to generate graphs and tables mapping levels of compliance with international standards and good practices, as well as for documenting progress over time. The LMT-S was employed by trained auditors in 34 laboratories located in 19 countries between 2015 and 2017. The tool is intended to help standardize animal health laboratory assessments, document compliance with recognized laboratory safety and biosecurity measures, serve as a self-help and training tool, and assist global laboratory development efforts by providing an accurate measurement of laboratory safety and biosecurity at local, national, and regional levels.

Social Networking for Emergency Management and Public Safety

Energy Technology Data Exchange (ETDEWEB)

Lesperance, Ann M.; Olson, Jarrod; Godinez, Melanie A.

2010-08-31

On March 10, 2010 the workshop titled Social Networking for Emergency Management and Public Safety was held in Seattle, WA. The objective of this workshop was to showcase ways social media networking technologies can be used to support emergency management and public safety operations. The workshop highlighted the current state of social networking and where this dynamic engagement is heading, demonstrated some of the more commonly used technologies, highlighted case studies on how these tools have been used in a variety of jurisdictions and engaged the private sector on how these tools might serve as a conduit for two way communication between with the public sector to address regional recovery issues and decision making.

Uncertain added value of Global Trigger Tool for monitoring of patient safety in cancer care

DEFF Research Database (Denmark)

Lipczak, Henriette; Neckelmann, Kirsten; Steding-Jessen, Marianne

2011-01-01

Monitoring patient safety is a challenging task. The lack of a golden standard has contributed to the recommendation and introduction of several methods. In 2000 the Danish Lung Cancer Registry (DLCR) was established to monitor the clinical management of lung cancer. In 2008 the Global Trigger Tool...... (GTT) was recommended in Denmark as a tool for the monitoring of patient safety. Ideally, the recommendation of a new tool should be preceded by a critical assessment of its added value....

Application of SAFRAN Tool for Knowledge Management at the Decommissioning Stage of Nuclear Facilities

International Nuclear Information System (INIS)

Smetnik, A.; Potapov, V.; Kapralov, E.; Murlis, D.

2016-01-01

Full text: As a result of the work performed by specialists of FSUE VO “Safety” under the scope of the CRAFT Project, the IAEA methodology and SAFRAN tool were used for safety assessment of radioactive waste removal from historical near-surface storage of the radon type. SAFRAN tool can be considered as an effective tool for record keeping, safety assessment and knowledge management at the stage of decommissioning of nuclear facilities. Main advantages of SAFRAN: • it uses methodologies agreed upon at the international level, namely, by IAEA standards; • several experts can work more effectively when performing the same safety assessment. SAFRAN makes it easier to exchange experience through sharing projects and data bases; • it is helpful for systematic and structured safety assessment as per safety standards; • it manages information and data in the same software environment. (author

Design an optimum safety policy for personnel safety management - A system dynamic approach

International Nuclear Information System (INIS)

Balaji, P.

2014-01-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making

Design an optimum safety policy for personnel safety management - A system dynamic approach

Energy Technology Data Exchange (ETDEWEB)

Balaji, P. [The Glocal University, Mirzapur Pole, Delhi- Yamuntori Highway, Saharanpur 2470001 (India)

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Design an optimum safety policy for personnel safety management - A system dynamic approach

Science.gov (United States)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

A Tool for Safety Officers Investigating " simple" Accidents

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2010-01-01

Most workplace accidents that happen in enterprises are simple and seldom result in serious injuries. Very often these kinds of workplace accidents are not investigated, and if they are, then the investigation is very brief, with comments such as that it was the victim’s own fault or just...... accidents normally caused by apparent banalities occur much more frequently and with a higher rate of fatalities, disablements and other serious injuries than the ostensibly most dangerous kinds of accidents. In 1999 a practical tool for use by safety officers was developed; this tool is based...... on the investigation methods applied in major accidents, but comprises a simpler and more user-friendly presentation. The tool involves three steps: Mapping the facts, analysing the events, and developing preventive solutions. Practical application of the tool has shown that it affords managers and workers...

Bridging the Divide between Safety and Risk Management for your Project or Program

Science.gov (United States)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

Forest management practices and the occupational safety and health administration logging standard

Science.gov (United States)

John R. Myers; David Elton Fosbroke

1995-01-01

The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

International Nuclear Information System (INIS)

Tyrer, M.J.

2002-01-01

This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

Design and Testing of BACRA, a Web-Based Tool for Middle Managers at Health Care Facilities to Lead the Search for Solutions to Patient Safety Incidents

Science.gov (United States)

Mira, José Joaquín; Vicente, Maria Asuncion; Fernandez, Cesar; Guilabert, Mercedes; Ferrús, Lena; Zavala, Elena; Silvestre, Carmen; Pérez-Pérez, Pastora

2016-01-01

Background Lack of time, lack of familiarity with root cause analysis, or suspicion that the reporting may result in negative consequences hinder involvement in the analysis of safety incidents and the search for preventive actions that can improve patient safety. Objective The aim was develop a tool that enables hospitals and primary care professionals to immediately analyze the causes of incidents and to propose and implement measures intended to prevent their recurrence. Methods The design of the Web-based tool (BACRA) considered research on the barriers for reporting, review of incident analysis tools, and the experience of eight managers from the field of patient safety. BACRA’s design was improved in successive versions (BACRA v1.1 and BACRA v1.2) based on feedback from 86 middle managers. BACRA v1.1 was used by 13 frontline professionals to analyze incidents of safety; 59 professionals used BACRA v1.2 and assessed the respective usefulness and ease of use of both versions. Results BACRA contains seven tabs that guide the user through the process of analyzing a safety incident and proposing preventive actions for similar future incidents. BACRA does not identify the person completing each analysis since the password introduced to hide said analysis only is linked to the information concerning the incident and not to any personal data. The tool was used by 72 professionals from hospitals and primary care centers. BACRA v1.2 was assessed more favorably than BACRA v1.1, both in terms of its usefulness (z=2.2, P=.03) and its ease of use (z=3.0, P=.003). Conclusions BACRA helps to analyze incidents of safety and to propose preventive actions. BACRA guarantees anonymity of the analysis and reduces the reluctance of professionals to carry out this task. BACRA is useful and easy to use. PMID:27678308

Design and Testing of BACRA, a Web-Based Tool for Middle Managers at Health Care Facilities to Lead the Search for Solutions to Patient Safety Incidents.

Science.gov (United States)

Carrillo, Irene; Mira, José Joaquín; Vicente, Maria Asuncion; Fernandez, Cesar; Guilabert, Mercedes; Ferrús, Lena; Zavala, Elena; Silvestre, Carmen; Pérez-Pérez, Pastora

2016-09-27

Lack of time, lack of familiarity with root cause analysis, or suspicion that the reporting may result in negative consequences hinder involvement in the analysis of safety incidents and the search for preventive actions that can improve patient safety. The aim was develop a tool that enables hospitals and primary care professionals to immediately analyze the causes of incidents and to propose and implement measures intended to prevent their recurrence. The design of the Web-based tool (BACRA) considered research on the barriers for reporting, review of incident analysis tools, and the experience of eight managers from the field of patient safety. BACRA's design was improved in successive versions (BACRA v1.1 and BACRA v1.2) based on feedback from 86 middle managers. BACRA v1.1 was used by 13 frontline professionals to analyze incidents of safety; 59 professionals used BACRA v1.2 and assessed the respective usefulness and ease of use of both versions. BACRA contains seven tabs that guide the user through the process of analyzing a safety incident and proposing preventive actions for similar future incidents. BACRA does not identify the person completing each analysis since the password introduced to hide said analysis only is linked to the information concerning the incident and not to any personal data. The tool was used by 72 professionals from hospitals and primary care centers. BACRA v1.2 was assessed more favorably than BACRA v1.1, both in terms of its usefulness (z=2.2, P=.03) and its ease of use (z=3.0, P=.003). BACRA helps to analyze incidents of safety and to propose preventive actions. BACRA guarantees anonymity of the analysis and reduces the reluctance of professionals to carry out this task. BACRA is useful and easy to use.

Leadership and Management for Safety. General Safety Requirements

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

Automated tools for safety-critical software

International Nuclear Information System (INIS)

Lapassat, A.M.

1993-01-01

The regulatory (DSIN), the utilities (EDF, CEA..) and the CEA-Institute for Protection and Nuclear Safety (IPSN) work together at the French nuclear safety. This paper presents a tool, called CLAIRE, for simulation and tests of different nuclear safety system. (TEC)

Improving diabetic foot care in a nurse-managed safety-net clinic.

Science.gov (United States)

Peterson, Joann M; Virden, Mary D

2013-05-01

This article is a description of the development and implementation of a Comprehensive Diabetic Foot Care Program and assessment tool in an academically affiliated nurse-managed, multidisciplinary, safety-net clinic. The assessment tool parallels parameters identified in the Task Force Foot Care Interest Group of the American Diabetes Association's report published in 2008, "Comprehensive Foot Examination and Risk Assessment." Review of literature, Silver City Health Center's (SCHC) 2009 Annual Report, retrospective chart review. Since the full implementation of SCHC's Comprehensive Diabetic Foot Care Program, there have been no hospitalizations of clinic patients for foot-related complications. The development of the Comprehensive Diabetic Foot Assessment tool and the implementation of the Comprehensive Diabetic Foot Care Program have resulted in positive outcomes for the patients in a nurse-managed safety-net clinic. This article demonstrates that quality healthcare services can successfully be developed and implemented in a safety-net clinic setting. ©2012 The Author(s) Journal compilation ©2012 American Association of Nurse Practitioners.

Assessing organisational culture for quality and safety improvement: a national survey of tools and tool use.

Science.gov (United States)

Mannion, R; Konteh, F H; Davies, H T O

2009-04-01

There is growing international interest in managing organisational culture as a lever for healthcare improvement. This has prompted a practical need to understand what instruments and tools exist for assessing cultures in healthcare contexts. The present study was undertaken to determine the culture assessment tools being used in the English NHS and assess their fitness for purpose. Postal questionnaire survey of clinical governance leads in 275 English NHS organisations, with a response rate of 77%. A third of the organisations were currently using a culture assessment instrument to support their clinical governance activity. Although we found a high degree of satisfaction with existing instruments, in terms of ease of use and relevance, there is an immediate practical need to develop new and better bespoke culture assessment tools to bridge the gap between the cultural domains covered by extant instruments and the broader range of concerns of clinical governance managers. There is growing interest in understanding and shaping local cultures in healthcare, which is not yet matched by widespread use of available instruments. Even though extant tools cover many of the most important cultural attributes identified by clinical governance managers, the over-riding focus of tools in use is on safety rather than a holistic assessment of the dimensions of healthcare quality and performance.

RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

OpenAIRE

V. A. Nikolayev

2012-01-01

Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

Workplace road safety risk management: An investigation into Australian practices.

Science.gov (United States)

Warmerdam, Amanda; Newnam, Sharon; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

2017-01-01

In Australia, more than 30% of the traffic volume can be attributed to work-related vehicles. Although work-related driver safety has been given increasing attention in the scientific literature, it is uncertain how well this knowledge has been translated into practice in industry. It is also unclear how current practice in industry can inform scientific knowledge. The aim of the research was to use a benchmarking tool developed by the National Road Safety Partnership Program to assess industry maturity in relation to risk management practices. A total of 83 managers from a range of small, medium and large organisations were recruited through the Victorian Work Authority. Semi-structured interviews aimed at eliciting information on current organisational practices, as well as policy and procedures around work-related driving were conducted and the data mapped onto the benchmarking tool. Overall, the results demonstrated varying levels of maturity of risk management practices across organisations, highlighting the need to build accountability within organisations, improve communication practices, improve journey management, reduce vehicle-related risk, improve driver competency through an effective workplace road safety management program and review organisational incident and infringement management. The findings of the study have important implications for industry and highlight the need to review current risk management practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

The safety evaluation guide for laboratories and plants a tool for enhancing safety

International Nuclear Information System (INIS)

Lhomme, Veronique; Daubard, Jean-Paul

2013-01-01

The Institute for Radioprotection and Nuclear Safety (IRSN) acts as technical support for the French government Authorities competent in nuclear safety and radiation protection for civil and defence activities. In this frame, the Institute's performs safety assessments of the safety cases submitted by operators to these Authorities for each stage in the life cycle of a nuclear facility, including dismantling operations, which is subjected to a licensing procedure. In the fuel cycle field, this concerns a large variety of facilities. Very often, depending on facilities and on safety cases, safety assessment to be performed is multidisciplinary and involves the supervisor in charge of the facility and several safety experts, particularly to cover the whole set of risks (criticality, exposure to radiation, fire, handling, containment, human and organisational factors...) encountered during facility's operations. Taking these into account, and in order to formalize the assessment process of the fuel cycle facilities, laboratories, irradiators, particle accelerators, under-decommissioning reactors and radioactive waste management, the 'Plants, Laboratories, Transports and Waste Safety' Division of IRSN has developed an internal guide, as a tool: - To present the methodological framework, and possible specificities, for the assessment according to the 'Defence in Depth Concept' (Part 1); - To provide key questions associated to the necessary contradictory technical review of the safety cases (Part 2); - To capitalise on experience on the basis of technical examples (coming from incident reports, previous safety assessments...) demonstrating the questioning (Part 3). The guide is divided in chapters, each dedicated to a type of risk (dissemination of radioactive material, external or internal exposure from ionising radiation, criticality, radiolysis mechanisms, handling operations, earthquake, human or organisational factors...) or to a type

Language Management Tools

DEFF Research Database (Denmark)

Sanden, Guro Refsum

This paper offers a review of existing literature on the topic of language management tools – the means by which language is managed – in multilingual organisations. By drawing on a combination of sociolinguistics and international business and management studies, a new taxonomy of language...... management tools is proposed, differentiating between three categories of tools. Firstly, corporate policies are the deliberate control of issues pertaining to language and communication developed at the managerial level of a firm. Secondly, corporate measures are the planned activities the firm’s leadership...... may deploy in order to address the language needs of the organisation. Finally, front-line practices refer to the use of informal, emergent language management tools available to staff members. The language management tools taxonomy provides a framework for operationalising the management of language...

Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. National Report of the Kingdom of the Netherlands

International Nuclear Information System (INIS)

2005-10-01

On 10 March 1999, the Netherlands signed the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, which was subsequently formally ratified on 26 April 2000 and entered into force on 18 June 2001. The Joint Convention obliges each contracting party to apply widely recognized principles and tools in order to achieve and maintain high standards of safety during management of spent fuel and radioactive waste. The Joint Convention also requires each party to report on the national implementation of these principles to review meetings of the parties to this Convention. This report describes the manner in which the Netherlands is fulfilling its obligations under the Joint Convention

Applying decision trial and evaluation laboratory as a decision tool for effective safety management system in aviation transport

Directory of Open Access Journals (Sweden)

Ifeanyichukwu Ebubechukwu Onyegiri

2016-10-01

Full Text Available In recent years, in the aviation industry, the weak engineering controls and lapses associated with safety management systems (SMSs are responsible for the seemingly unprecedented disasters. A previous study has confirmed the difficulties experienced by safety managers with SMSs and the need to direct research to this area of investigation for more insights and progress in the evaluation and maintenance of SMSs in the aviation industry. The purpose of this work is to examine the application of Decision Trial and Evaluation Laboratory (DEMATEL to the aviation industry in developing countries with illustration using the Nigerian aviation survey data for the validation of the method. The advantage of the procedure over other decision making methods is in its ability to apply feedback in its decision making. It also affords us the opportunity of breaking down the complex aviation SMS components and elements which are multi-variate in nature through the analysis of the contributions of the diverse system criteria from the perspective of cause and effects, which in turn yields easier and yet more effective aviation transportation accident pre-corrective actions. In this work, six revised components of an SMS were identified and DEMATEL was applied to obtain their direct and indirect impacts and influences on the overall SMS performance. Data collection was by the survey questionnaire, which served as the initial direct-relation matrix, coded in Matlab software for establishing the impact relation map (IRM. The IRM was then plotted in MS Excel spread-sheet software. From our results, safety structure and regulation has the highest impact level on an SMS with a corresponding positive relation level value. In conclusion, the results agree with those of previous researchers that used grey relational analysis. Thus, DEMATEL serves as a great tool and resource for the safety manager.

Machine and Woodworking Tool Safety. Module SH-24. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on machine and woodworking tool safety is one of 50 modules concerned with job safety and health. This module discusses specific practices and precautions concerned with the efficient operation and use of most machine and woodworking tools in use today. Following the introduction, 13 objectives (each keyed to a page in the…

Safety Climate, Perceived Risk, and Involvement in Safety Management

OpenAIRE

Kouabenan , Dongo Rémi; Ngueutsa , Robert ,; Safiétou , Mbaye

2015-01-01

International audience; This article examines the relationship between safety climate, risk perception and involvement in safety management by first-line managers (FLM). Sixty-three FLMs from two French nuclear plants answered a questionnaire measuring perceived workplace safety climate, perceived risk, and involvement in safety management. We hypothesized that a positive perception of safety climate would promote substantial involvement in safety management, and that this effect would be str...

RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

Directory of Open Access Journals (Sweden)

V. A. Nikolayev

2012-01-01

Full Text Available Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

Management of safety, safety culture and self assessment

International Nuclear Information System (INIS)

Carnino, A.

2000-01-01

Safety management is the term used for the measures required to ensure that an acceptable level of safety is maintained throughout the life of an installation, including decommissioning. The safety culture concept and its implementation are described in part one of the paper. The principles of safety are now quite well known and are implemented worldwide. It leads to a situation where harmonization is being achieved as indicated by the entry into force of the Convention on Nuclear Safety. To go beyond the present nuclear safety levels, management of safety and safety culture will be the means for achieving progress. Recent events which took place in major nuclear power countries have shown the importance of the management and the consequences on safety. At the same time, electricity deregulation is coming and will impact on safety through reductions in staffing and in operation and maintenance cost at nuclear installations. Management of safety as well as its control and monitoring by the safety authorities become a key to the future of nuclear energy.(author)

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

Input to electronic food safety management tools in catering

DEFF Research Database (Denmark)

Knøchel, S.; Hansen, H.F.; Hansen, B.S.

-food outlets, hospitals and nursing homes, nurseries etc. Often a great variety of raw materials and cooking processes are used. This requires a high degree of food safety know-how and management skills in the kitchens. Although a short course in food hygiene is mandatory, the labour force may be transient...... officers. A simple questionnaire helps the production site to identify the critical control points and target values. Danish style open-faced sandwiches as well as other sandwiches constitute a major part of the meals and they are characterized by not being heated prior to consumption and by the mix...

COMSY - A Software Tool for Aging and Plant Life Management

International Nuclear Information System (INIS)

Zander, Andre; Nopper, Helmut

2012-01-01

A Plant-wide and systematic Aging and Plant Life Management is essential for the safe operation and/or availability of nuclear power plants. The Aging Management (AM) has the objective to monitor and control degradation effects for safety relevant Systems, Structures and Components (SSCs) which may compromise safety functions of the plant. The Plant Life Management (PLM) methodology also includes aging surveillance for availability relevant SSCs. AM and PLM cover mechanical components, electrical and I and C systems and civil structures All Aging and Plant Life Management rules call for a comprehensive approach, requiring the systematic collection of various aging and safety relevant data on a plant-wide basis. This data needs to be serviced and periodically evaluated. Due to the complexity of the process, this activity needs to be supported by a qualified software tool for the management of aging relevant data and associated documents (approx. 30 000 SSCs). In order to support the power plant operators AREVA NP has developed the software tool COMSY. The COMSY software with its integrated AM modules enables the design and setup of a knowledge-based power plant model compatible to the requirements of international and national rules (e.g. IAEA Safety Guide NS-G-2.12, KTA 1403). In this process, a key task is to identify and monitor degradation mechanisms. For this purpose the COMSY tool provides prognosis and trending functions, which are based on more than 30 years of experience in the evaluation of degradation effects and numerous experimental studies. Since 1998 COMSY has been applied successfully in more than fifty reactor units in this field. The current version 3.0 was revised completely and offers additional AM functions. All aging-relevant component data are compiled and allocated via an integrated power plant model. Owing to existing interfaces to other software solutions and flexible import functions, COMSY is highly compatible with already existing data

Risk monitor - a tool for operational safety assessment risk monitor - user's manual

International Nuclear Information System (INIS)

Hari Prasad, M.; Vinod, Gopika; Saraf, R.K.; Ghosh, A.K.

2006-06-01

Probabilistic Safety Assessment has become a key tool as on today to identify and understand Nuclear Power Plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk Monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk Monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear Power plant. Operation of Risk Monitor is based on PSA methods for assisting in day to day applications. Risk Monitoring programs can assess the risk profile and are used to optimize the operation of Nuclear Power Plants with respect to a minimum risk level over the operating time. This report presents the background activities of Risk Monitor, its application areas and the step by step procedure for the user.to interact with the software. This software can be used with the PSA model of any Nuclear Power Plant. (author)

The Role of Labor-Management Committees in Safeguarding Worker Safety and Health.

Science.gov (United States)

Ruttenberg, Ruth

There are thousands of labor-management committees for occupational safety and health in the United States. Most were established or activated after passage of the Occupational Safety and Health Act of 1970. Such committees can be an important tool when used as part of a comprehensive effort to achieve safety and health in the workplace. In the…

The safety performance management system: A tool for diagnosis, intervention and measurement

International Nuclear Information System (INIS)

Haber, S.B.; Shurberg, D.A.

2002-01-01

Many organizations depend on human performance to avoid incidents involving significant adverse consequences. Such organizations are typically termed high reliability organizations (HROs). While heavy emphasis has been placed on designing system hardware and software to intercept and mitigate events that could cause adverse consequences, dealing with the design of the human component has proven to be more complicated. Examination of various safety-related incidents makes it clear that human performance, and in particular organizational processes, plays a dominant role. The human errors are of various origins and are typically part of larger organizational processes that encourage unsafe acts that ultimately produce system failures. It is generally postulated that without an effective organizational safety culture, a safe working environment is impossible. While many different perspectives exist from which safety issues might be addressed, a method that allows the quantitative measurement of organizational processes deemed to impact overall safety performance is considered useful to understand the potential for future inadequate safety performance. This paper describes the Safety Performance Management System, a method useful for diagnosis, subsequent intervention and follow-on measurement. Implications for use of this method are presented and the concluding discussion includes insights regarding the general application of the method to improved facility safety performance. (author)

Development of a Safety Assessment Information System for the Management of Periodic Safety Assessment Activities

International Nuclear Information System (INIS)

Song, Tae Young

2007-01-01

At present, the 10-year Periodic Safety Review(PSR) has been performing to confirm all the aspects of safety issues for all the operating plants in compliance with domestic nuclear law of article 23, subarticle 3. For each plant, in addition, Probabilistic Safety Assessment(PSA) and Severe Accident Management Guideline(SAMG) are being implemented and revised periodically to reflect the latest safety level according to principle fulfillment of severe accident policy statement. The assessment reports, as one of outcomes from these activities, are submitted into and reviewed by domestic regulatory body. During reviewing (in-office duty) and licensing (regulatory duty) process, a large number of outcomes of which most are the formal technical reports and licensing materials, are inevitably produced. Moreover, repeated review process over the plants can make them accumulated and produce a variety of documents additionally. This circumstance motivates to develop effective tool or system for the management of these reports and related technical documents for the future use in licensing process and for subsequent plant assessments. This paper presents the development status of Safety Assessment Information System(SAIS) which manages safety-related documents of PSR, PSA and SAMG for practical use for experienced engineers in charge of these areas

Development of a Safety Assessment Information System for the Management of Periodic Safety Assessment Activities

Energy Technology Data Exchange (ETDEWEB)

Song, Tae Young [Nuclear Engineering and Technology Institute, Daejeon (Korea, Republic of)

2007-07-01

At present, the 10-year Periodic Safety Review(PSR) has been performing to confirm all the aspects of safety issues for all the operating plants in compliance with domestic nuclear law of article 23, subarticle 3. For each plant, in addition, Probabilistic Safety Assessment(PSA) and Severe Accident Management Guideline(SAMG) are being implemented and revised periodically to reflect the latest safety level according to principle fulfillment of severe accident policy statement. The assessment reports, as one of outcomes from these activities, are submitted into and reviewed by domestic regulatory body. During reviewing (in-office duty) and licensing (regulatory duty) process, a large number of outcomes of which most are the formal technical reports and licensing materials, are inevitably produced. Moreover, repeated review process over the plants can make them accumulated and produce a variety of documents additionally. This circumstance motivates to develop effective tool or system for the management of these reports and related technical documents for the future use in licensing process and for subsequent plant assessments. This paper presents the development status of Safety Assessment Information System(SAIS) which manages safety-related documents of PSR, PSA and SAMG for practical use for experienced engineers in charge of these areas.

FLUOR HANFORD SAFETY MANAGEMENT PROGRAMS

Energy Technology Data Exchange (ETDEWEB)

GARVIN, L. J.; JENSEN, M. A.

2004-04-13

This document summarizes safety management programs used within the scope of the ''Project Hanford Management Contract''. The document has been developed to meet the format and content requirements of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses''. This document provides summary descriptions of Fluor Hanford safety management programs, which Fluor Hanford nuclear facilities may reference and incorporate into their safety basis when producing facility- or activity-specific documented safety analyses (DSA). Facility- or activity-specific DSAs will identify any variances to the safety management programs described in this document and any specific attributes of these safety management programs that are important for controlling potentially hazardous conditions. In addition, facility- or activity-specific DSAs may identify unique additions to the safety management programs that are needed to control potentially hazardous conditions.

Construction managers' perceptions of construction safety practices in small and large firms: a qualitative investigation.

Science.gov (United States)

Gillen, Marion; Kools, Susan; McCall, Cade; Sum, Juliann; Moulden, Kelli

2004-01-01

Despite the institution of explicit safety practices in construction, there continue to be exceedingly high rates of morbidity and mortality from work-related injury. This study's purpose was to identify, compare and contrast views of construction managers from large and small firms regarding construction safety practices. A complementary analysis was conducted with construction workers. A semi-structured interview guide was used to elicit information from construction managers (n = 22) in a series of focus groups. Questions were designed to obtain information on direct safety practices and indirect practices such as communication style, attitude, expectations, and unspoken messages. Data were analyzed using thematic content analysis. Managers identified a broad commitment to safety, worker training, a changing workplace culture, and uniform enforcement as key constructs in maintaining safe worksites. Findings indicate that successful managers need to be involved, principled, flexible, and innovative. Best practices, as well as unsuccessful injury prevention programs, were discussed in detail. Obstacles to consistent safety practice include poor training, production schedules and financial constraints. Construction managers play a pivotal role in the definition and implementation of safety practices in the workplace. In order to succeed in this role, they require a wide variety of management skills, upper management support, and tools that will help them instill and maintain a positive safety culture. Developing and expanding management skills of construction managers may assist them in dealing with the complexity of the construction work environment, as well as providing them with the tools necessary to decrease work-related injuries.

Waste management safety

International Nuclear Information System (INIS)

Boehm, H.

1983-01-01

All studies carried out by competent authors of the safety of a waste management concept on the basis of reprocessing of the spent fuel elements and storage in the deep underground of the radioactive waste show that only a minor technical risk is involved in this step. This also holds true when evaluating the accidents which have occurred in waste management facilities. To explain the risk, first the completely different safety aspects of nuclear power plants, reprocessing plants and repositories are outlined together with the safety related characteristics of these plants. Also this comparison indicates that the risk of waste management facilities is considerably lower than the, already very small, risk of nuclear power plants. For the final storage of waste from reprocessing and for the direct storage of fuel elements, the results of safety analyses show that the radiological exposure following an accident with radioactivity releases, even under conservative assumptions, is considerably below the natural radiation exposure. The very small danger to the environment arising from waste management by reprocessing clearly indicates that aspects of technical safety alone will hardly be a major criterion for the decision in favor of one or the other waste management approach. (orig.) [de

Safety management in nuclear technology. Proceedings

International Nuclear Information System (INIS)

2008-01-01

At the symposium of TueV Sued AG (Munich, Federal Republic of Germany) held in Munich on 28 and 29 October 2008, the following lectures were held: (1) Fundamental requirements of the management system in nuclear technology - Experiences from the international developments at IAEA and WENRA (M. Herttrich); (2) Information from a comparison of requirements of safety management systems (B. Kallenbach-Herbert); (3) Requirements of a modern management system in German nuclear power plants from the view of nuclear safety (D. Majer); (4) Requirements on safety management in module 8 of the regulations project (M. Maqua); (5) Requirements on the management system in nuclear power plants according to GRS-229 and developments at the KTA 1402 ''Integrated management system for safe operation of nuclear power plants (in progress)'' (C. Verstegen); (6) Experiences from the development and implementation of safety management systems in connection with the works management of a nuclear power plant (K. Ramler); (7) Design of a safety management system of a nuclear power plant in consideration of existing management systems (U. Naumann); (8) Experiences in the utilization and evaluation of a safety management system (J. Ritter); (9) Aspects of leadership of safety management systems (S. Seitz); (10) Management of safety or safety management system? Prevailing or administration? (A. Frischknecht); (11) Change management - strategies for successful transfer of new projects: How can I motivate co-workers for a further development of the safety management system? (U. Schnabel); (12) Requirements concerning indicators in integrated management systems and safety management systems (J. Stiller); (13) Integration of proactive and reactive indicators in the safety management system (B. Fahlbruch); (14) What do indicators show? About the use of indicators by regulatory authorities (A. Kern); (15) Safety management and radiation protection in nuclear technology (K. Grantner); (16) Any more

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

Use of reliability engineering tools in safety and risk assessment of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Raso, Amanda Laureano; Vasconcelos, Vanderley de; Marques, Raíssa Oliveira; Soares, Wellington Antonio; Mesquita, Amir Zacarias, E-mail: amandaraso@hotmail.com, E-mail: vasconv@cdtn.br, E-mail: raissaomarques@gmail.com, E-mail: soaresw@cdtn.br, E-mail: amir@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Serviço de Tecnologia de Reatores

2017-07-01

Safety, reliability and availability are fundamental criteria in design, construction and operation of nuclear facilities, as nuclear power plants. Deterministic and probabilistic risk assessments of such facilities are required by regulatory authorities in order to meet licensing regulations, contributing to assure safety, as well as reduce costs and environmental impacts. Probabilistic Risk Assessment has become an important part of licensing requirements of the nuclear power plants in Brazil and in the world. Risk can be defined as a qualitative and/or quantitative assessment of accident sequence frequencies (or probabilities) and their consequences. Risk management is a systematic application of management policies, procedures and practices to identify, analyze, plan, implement, control, communicate and document risks. Several tools and computer codes must be combined, in order to estimate both probabilities and consequences of accidents. Event Tree Analysis (ETA), Fault Tree Analysis (FTA), Reliability Block Diagrams (RBD), and Markov models are examples of evaluation tools that can support the safety and risk assessment for analyzing process systems, identifying potential accidents, and estimating consequences. Because of complexity of such analyzes, specialized computer codes are required, such as the reliability engineering software develop by Reliasoft® Corporation. BlockSim (FTA, RBD and Markov models), RENO (ETA and consequence assessment), Weibull++ (life data and uncertainty analysis), and Xfmea (qualitative risk assessment) are some codes that can be highlighted. This work describes an integrated approach using these tools and software to carry out reliability, safety, and risk assessment of nuclear facilities, as well as, and application example. (author)

Use of reliability engineering tools in safety and risk assessment of nuclear facilities

International Nuclear Information System (INIS)

Raso, Amanda Laureano; Vasconcelos, Vanderley de; Marques, Raíssa Oliveira; Soares, Wellington Antonio; Mesquita, Amir Zacarias

2017-01-01

Safety, reliability and availability are fundamental criteria in design, construction and operation of nuclear facilities, as nuclear power plants. Deterministic and probabilistic risk assessments of such facilities are required by regulatory authorities in order to meet licensing regulations, contributing to assure safety, as well as reduce costs and environmental impacts. Probabilistic Risk Assessment has become an important part of licensing requirements of the nuclear power plants in Brazil and in the world. Risk can be defined as a qualitative and/or quantitative assessment of accident sequence frequencies (or probabilities) and their consequences. Risk management is a systematic application of management policies, procedures and practices to identify, analyze, plan, implement, control, communicate and document risks. Several tools and computer codes must be combined, in order to estimate both probabilities and consequences of accidents. Event Tree Analysis (ETA), Fault Tree Analysis (FTA), Reliability Block Diagrams (RBD), and Markov models are examples of evaluation tools that can support the safety and risk assessment for analyzing process systems, identifying potential accidents, and estimating consequences. Because of complexity of such analyzes, specialized computer codes are required, such as the reliability engineering software develop by Reliasoft® Corporation. BlockSim (FTA, RBD and Markov models), RENO (ETA and consequence assessment), Weibull++ (life data and uncertainty analysis), and Xfmea (qualitative risk assessment) are some codes that can be highlighted. This work describes an integrated approach using these tools and software to carry out reliability, safety, and risk assessment of nuclear facilities, as well as, and application example. (author)

BARC-risk monitor- a tool for operational safety assessment in nuclear power plants

International Nuclear Information System (INIS)

Vinod, Gopika; Saraf, R.K.; Babar, A.K.; Hadap, Nikhil

2000-12-01

Probabilistic safety assessment has become a key tool as on today to identify and understand nuclear power plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear power plant. Operation of risk monitor is based on PSA methods for assisting in day to day applications. Risk monitoring programs can assess the risk profile and are used to optimise the operation of nuclear power plants with respect to a minimum risk level over the operating time. This report presents the background activities of risk monitor, its application areas and also gives the status of such tools in international scenarios. The software is based on the PSA model of Kaiga generating station and would be applicable to similar design configuration. (author)

Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Design and Development of a Clinical Risk Management Tool Using Radio Frequency Identification (RFID).

Science.gov (United States)

Pourasghar, Faramarz; Tabrizi, Jafar Sadegh; Yarifard, Khadijeh

2016-04-01

Patient safety is one of the most important elements of quality of healthcare. It means preventing any harm to the patients during medical care process. This paper introduces a cost-effective tool in which the Radio Frequency Identification (RFID) technology is used to identify medical errors in hospital. The proposed clinical error management system (CEMS) is consisted of a reader device, a transfer/receiver device, a database and managing software. The reader device works using radio waves and is wireless. The reader sends and receives data to/from the database via the transfer/receiver device which is connected to the computer via USB port. The database contains data about patients' medication orders. The CEMS has the ability to identify the clinical errors before they occur and then warns the care-giver with voice and visual messages to prevent the error. This device reduces the errors and thus improves the patient safety. A new tool including software and hardware was developed in this study. Application of this tool in clinical settings can help the nurses prevent medical errors. It can also be a useful tool for clinical risk management. Using this device can improve the patient safety to a considerable extent and thus improve the quality of healthcare.

Management and organizational indicators of process safety

International Nuclear Information System (INIS)

Van Hemel, S.B.; Connelly, E.M.; Haas, P.M.

1991-01-01

This study is part of a Nuclear Regulatory Commission research element on organizational factors in plant safety under the Human Factors research program. This paper reports that the study investigated the chemical industry, to find leading management or organizational tools which could be useful for the NRC. After collecting information form a variety of information sources, the authors concentrated our study on two types of indicators currently in use: the first is audit- or review-based, and concentrates on programmatic factors; the second, based on frequent behavioral observations, concentrates on the management of individual worker behaviors. The authors analyzed data on the relationships between the leading indictors and direct indictors such as accident and injury rates in three case studies, to determine whether sufficient evidence of validity and utility exists to justify consideration of these indicators as public safety indicators. This paper states that on the basis of statistical associations and other evidence, the authors concluded that the two indicator types have promise for use as plant safety performance indicators, and that further development and testing of the candidate indicators should be performed

A proactive method for safety management in nuclear facilities

International Nuclear Information System (INIS)

Grecco, Claudio Henrique dos Santos; Carvalho, Paulo Victor Rodrigues de; Santos, Isaac Antonio Luquetti dos

2014-01-01

Due to the modern approach to address the safety of nuclear facilities which highlights that these organizations must be able to assess and proactively manage their activities becomes increasingly important the need for instruments to evaluate working conditions. In this context, this work presents a proactive method of managing organizational safety, which has three innovative features: 1) the use of predictive indicators that provide current information on the performance of activities, allowing preventive actions and not just reactive in safety management, different from safety indicators traditionally used (reactive indicators) that are obtained after the occurrence of undesired events; 2) the adoption of resilience engineering approach in the development of indicators - indicators are based on six principles of resilience engineering: top management commitment, learning, flexibility, awareness, culture of justice and preparation for the problems; 3) the adoption of the concepts and properties of fuzzy set theory to deal with subjectivity and consistency of human trials in the evaluation of the indicators. The fuzzy theory is used primarily to map qualitative models of decision-making, and inaccurate representation methods. The results of this study aim an improvement in performance and safety in organizations. The method was applied in a radiopharmaceutical shipping sector of a nuclear facility. The results showed that the method is a good monitoring tool objectively and proactively of the working conditions of an organizational domain

Understanding the application of knowledge management to the safety critical facilities

International Nuclear Information System (INIS)

Ilina, Elena

2010-01-01

Challenges to the operating nuclear power plants and transport infrastructures are outlined. It is concluded that most aggravating factors are related to knowledge. Thus, of necessity, effective knowledge management is required. Knowledge management theories are reviewed in their historical perspective as a natural extension and unification of information theories and theories about learning. The first line is identified with names as Wiener, Ashby, Shannon, Jaynes, Dretske, Harkevich. The second line - with Vygotsky, Engestroem, Carayannis. The recent developments of knowledge management theorists as Davenport, Prusak, Drew, Wiig, Zack are considered stressing learning, retaining of knowledge, approaching the state awareness of awareness, and alignment of knowledge management with the strategy of the concerned organizations. Further, some of the details and results are presented of what is achieved so far. More specifically, knowledge management tools are applied to the practical work activities as event reporting, data collection, condition assessment, verification of safety functions and incident investigation. Obstacles are identified and improvements are proposed. Finally, it is advised to continue to implement and further develop knowledge management tools in the organizations involved in various aspects of safety critical facilities

IAEA Safety Standards on Management Systems and Safety Culture

International Nuclear Information System (INIS)

Persson, Kerstin Dahlgren

2007-01-01

The IAEA has developed a new set of Safety Standard for applying an integrated Management System for facilities and activities. The objective of the new Safety Standards is to define requirements and provide guidance for establishing, implementing, assessing and continually improving a Management System that integrates safety, health, environmental, security, quality and economic related elements to ensure that safety is properly taken into account in all the activities of an organization. With an integrated approach to management system it is also necessary to include the aspect of culture, where the organizational culture and safety culture is seen as crucial elements of the successful implementation of this management system and the attainment of all the goals and particularly the safety goals of the organization. The IAEA has developed a set of service aimed at assisting it's Member States in establishing. Implementing, assessing and continually improving an integrated management system. (author)

Electronic Safety Resource Tools -- Supporting Hydrogen and Fuel Cell Commercialization

Energy Technology Data Exchange (ETDEWEB)

Barilo, Nick F.

2014-09-29

The Pacific Northwest National Laboratory (PNNL) Hydrogen Safety Program conducted a planning session in Los Angeles, CA on April 1, 2014 to consider what electronic safety tools would benefit the next phase of hydrogen and fuel cell commercialization. A diverse, 20-person team led by an experienced facilitator considered the question as it applied to the eight most relevant user groups. The results and subsequent evaluation activities revealed several possible resource tools that could greatly benefit users. The tool identified as having the greatest potential for impact is a hydrogen safety portal, which can be the central location for integrating and disseminating safety information (including most of the tools identified in this report). Such a tool can provide credible and reliable information from a trustworthy source. Other impactful tools identified include a codes and standards wizard to guide users through a series of questions relating to application and specific features of the requirements; a scenario-based virtual reality training for first responders; peer networking tools to bring users from focused groups together to discuss and collaborate on hydrogen safety issues; and a focused tool for training inspectors. Table ES.1 provides results of the planning session, including proposed new tools and changes to existing tools.

Road Safety Data, Collection, Transfer and Analysis DaCoTa. Deliverable 1.2: Road safety management investigation model and questionnaire.

NARCIS (Netherlands)

Dupont, H. Martensen, H. Papadimitriou, E. Yannis, G. Muhlrad, N. Jähi, H. Vallet, G. Giustiniani, G. Tripodi, A. Usami, D. Bax, C. Wijnen, W. Schöne, M.-L. Machata, K. Buttler, I. Zysinska, M. Talbot, R. Gitelman, V. & Hakkert, S. & Muhlrad, N. Gitelman, V. & Buttler, I. (Eds.)

2012-01-01

The aim of the DaCoTA Work Package 1 is to investigate road safety policy-making and management processes in Europe. In the Deliverables released previously, the Work Package 1 assessed the experts’ needs in terms of road safety knowledge, data and decision support tools (Deliverable 1.1/4.1), as

Risk management: A tool for improving nuclear power plant performance

International Nuclear Information System (INIS)

2001-04-01

This technical document on risk management as a tool for improving nuclear power plant (NPP) operations is part of an ongoing project on management of NPP operations in a competitive environment. The overall objective of this project is to assist the management of operating organizations and NPPs in identifying and implementing appropriate measures to remain competitive in a rapidly changing business environment. Other reports developed through this project have identified overall strategies and techniques that NPP operating organization managers can use to succeed in more competitive energy markets. For example, in IAEA-TECDOC-1123, Strategies for Competitive Nuclear Power Plants, one of the most important strategies identified was integrated risk management. This publication provides a recommended structure for risk management along with examples of how NPP operating organizations are using this tool to help them integrate safety, operational and economic related risks in a changing business environment

ePORT, NASA's Computer Database Program for System Safety Risk Management Oversight (Electronic Project Online Risk Tool)

Science.gov (United States)

Johnson, Paul W.

2008-01-01

ePORT (electronic Project Online Risk Tool) provides a systematic approach to using an electronic database program to manage a program/project risk management processes. This presentation will briefly cover the standard risk management procedures, then thoroughly cover NASA's Risk Management tool called ePORT. This electronic Project Online Risk Tool (ePORT) is a web-based risk management program that provides a common framework to capture and manage risks, independent of a programs/projects size and budget. It is used to thoroughly cover the risk management paradigm providing standardized evaluation criterion for common management reporting, ePORT improves Product Line, Center and Corporate Management insight, simplifies program/project manager reporting, and maintains an archive of data for historical reference.

Safe operation of nuclear power plants - Is safety culture an adequate management method?

International Nuclear Information System (INIS)

Piirto, A.

2012-01-01

One of the characteristics of a good safety culture is a definable commitment to the improvement of safety behaviours and attitudes at all organisational levels. A second characteristic of an organisation with excellent safety culture is free and open communication. The general understanding has been that safety culture is a part of organisation culture. In addition to safety culture thinking, proactive programmes and displays of proactive work to improve safety are required. This work needs to include, qt a minimum, actions aiming at reducing human errors, the development of human error prevention tools, improvements in training, and the development of working methods and the organisation's activities. Safety depends not only on the technical systems, but also on the organisation. There is a need for better methods and tools for organisational assessment and development. Today there is universal acceptance of the significant impact that management and organisational factors have over the safety significance of complex industrial installations such as nuclear power plants. Many events with significant economic and public impact had causes that have been traced to management deficiencies. The objective of this study is development of new methods to increase safety of nuclear power plant operation. The research has been limited to commercial nuclear power plants that are intended for electrical power generation in Finland. Their production activities, especially operation and maintenance, are primarily reviewed from a safety point of view, as well as human performance and organisational factors perspective. This defines the scope and focus of the study. The research includes studies related to knowledge management and tacit knowledge in the project management context and specific studies related to transfer of tacit knowledge in the maintenance organization and transfer of tacit knowledge between workers of old generation and young generation. The empirical results

Safe operation of nuclear power plants - Is safety culture an adequate management method?

Energy Technology Data Exchange (ETDEWEB)

Piirto, A.

2012-07-01

One of the characteristics of a good safety culture is a definable commitment to the improvement of safety behaviours and attitudes at all organisational levels. A second characteristic of an organisation with excellent safety culture is free and open communication. The general understanding has been that safety culture is a part of organisation culture. In addition to safety culture thinking, proactive programmes and displays of proactive work to improve safety are required. This work needs to include, qt a minimum, actions aiming at reducing human errors, the development of human error prevention tools, improvements in training, and the development of working methods and the organisation's activities. Safety depends not only on the technical systems, but also on the organisation. There is a need for better methods and tools for organisational assessment and development. Today there is universal acceptance of the significant impact that management and organisational factors have over the safety significance of complex industrial installations such as nuclear power plants. Many events with significant economic and public impact had causes that have been traced to management deficiencies. The objective of this study is development of new methods to increase safety of nuclear power plant operation. The research has been limited to commercial nuclear power plants that are intended for electrical power generation in Finland. Their production activities, especially operation and maintenance, are primarily reviewed from a safety point of view, as well as human performance and organisational factors perspective. This defines the scope and focus of the study. The research includes studies related to knowledge management and tacit knowledge in the project management context and specific studies related to transfer of tacit knowledge in the maintenance organization and transfer of tacit knowledge between workers of old generation and young generation. The empirical

Industrial safety management with emphasis on construction safety

International Nuclear Information System (INIS)

Bhattacharya, R.

2016-01-01

Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

Managing electrical safety

CERN Document Server

Wiggins, James H, Jr

2001-01-01

Managing Electrical Safety provides an overview of electric basics, hazards, and established standards that enables you to understand the hazards you are likely to encounter in your workplace. Focusing on typical industrial environments-which utilize voltages much higher than household or office circuits-the author identifies the eight key components of an electrical safety program and examines each using a model safety management process. You'll learn how to identify electrical hazards, how to prescribe necessary electrical Personal Protective Equipment, how to ensure that equipment is de-ene

Organization and management of the plant safety evaluation of the VVER-440/230 units at Novovoronezh

International Nuclear Information System (INIS)

Afshar, C. M.; Pizzica, P.; Puglia, W. J.; Rozin, V.

1999-01-01

As part of the Soviet-Designed Reactor Safety (SDRS) element of the International Nuclear Safety Program (INSP), the US Department of Energy (US DOE) is funding a plant safety evaluation (PSE) project for the Novovoronezh Nuclear Power Plant (NvNPP). The Novovoronezh PSE Project is a multi-faceted project with participants from sixteen different international organizations from five different countries scattered across eleven time zones. The purpose of this project is to provide a thorough Probabilistic Risk Analysis (PRA) and Deterministic Safety Analysis (DSA) for Units 3 and 4 of the NvNPP. In addition, this project provides assistance to the operation organizations in meeting their international commitments in support of safety upgrades, and their regulatory requirements for the conduct of safety analyses. Managing this project is a complex process requiring numerous management tools, constant monitoring, and effective communication skills. Employing management tools to resolve unanticipated problems one of the keys to project success. The overall scope, programmatic context, objectives, project interactions, communications, practical hindrances, and lessons learned from the challenging performance of the PSE project are summarized in this paper

Implementation of the safety culture for HANARO Safety Management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which the management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of the safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of safety management in nuclear activities for a reactor application and utilization has also been emphasized more than 10 years in HANARO which is a 30 MW multi-purpose research reactor and achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation like the seminars and lectures related to safety matters, participation in international workshops, the development of safety culture indicators, the survey on the attitude of safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e-Learning program for safety education. (author)

Voluntary Safety Management System in the Manufacturing Industry – To What Extent does OHSAS 18001 Certification Help?

Directory of Open Access Journals (Sweden)

Paas Õnnela

2015-11-01

Full Text Available Occupational risk prevention can be managed in several ways. Voluntary safety management standard OHSAS 18001 is a tool, which is considered to give contribution in effective risk management in the manufacturing industry. The current paper examines the benefits of OHSAS 18001 based on the statistical analysis. MISHA method is used for safety audit in 16 Estonian enterprises. The results demonstrate the objectives why companies implement or are willing to implement OHSAS 18001, bring out differences in safety activities for 3 types of companies and determine correlations among different safety activity areas. The information is valuable for enterprises that are willing to improve their safety activities via a voluntary safety management system.

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose

Integration of safety in management tasks in onshore transport SME´s

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2015-01-01

with animals and the risk of violence and robbery. To create a high level of safety in an enterprise is a difficult task that demands a great degree of management engagement. It is not only a question of having the right equipment, procedures and organization etc.; it is also necessary for everyone...... in the enterprise to have an understanding of safety and feel obligated to take responsibility for safety in all work at all times. Accident research shows that safety must be integrated in the whole enterprise and function on all levels of management, while it must also involve all employees in their daily work...... prevention. The result is a realistic strategy for integration safety, quality and environmental factors in an SME and procedures for how to go from strategy to action. Different tools were developed to fulfil the strategy ranging from risk identification, involvement of the employee and motivational...

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose

Radiation safety requirements for radioactive waste management in the framework of a quality management system

International Nuclear Information System (INIS)

Salgado, M.M.; Benitez, J.C.; Pernas, R.; Gonzalez, N.

2007-01-01

The Center for Radiation Protection and Hygiene (CPHR) is the institution responsible for the management of radioactive wastes generated from nuclear applications in medicine, industry and research in Cuba. Radioactive Waste Management Service is provided at a national level and it includes the collection and transportation of radioactive wastes to the Centralized Waste Management Facilities, where they are characterized, segregated, treated, conditioned and stored. A Quality Management System, according to the ISO 9001 Standard has been implemented for the RWM Service at CPHR. The Management System includes the radiation safety requirements established for RWM in national regulations and in the Licence's conditions. The role of the Regulatory Body and the Radiation Protection Officer in the Quality Management System, the authorization of practices, training and personal qualification, record keeping, inspections of the Regulatory Body and internal inspection of the Radiation Protection Officer, among other aspects, are described in this paper. The Quality Management System has shown to be an efficient tool to demonstrate that adequate measures are in place to ensure the safety in radioactive waste management activities and their continual improvement. (authors)

FLIGHT SAFETY MANAGEMENT PROBLEMS AND EVALUATION OF FLIGHT SAFETY LEVEL OF AN AVIATION ENTERPRISE

Directory of Open Access Journals (Sweden)

B. V. Zubkov

2017-01-01

Full Text Available This article is devoted to studying the problem of safety management system (SMS and evaluating safety level of an aviation enterprise.This article discusses the problems of SMS, presented at the 41st meeting of the Russian Aviation Production Commanders Club in June 2014 in St. Petersburg in connection with the verification of the status of the CA of the Russian Federation by the International Civil Aviation Organization (ICAO in the same year, a set of urgent measures to eliminate the deficiencies identified in the current safety management system by participants of this meeting were proposed.In addition, the problems of evaluating flight safety level based on operation data of an aviation enterprise were analyzed. This analysis made it possible to take into account the problems listed in this article as a tool for a comprehensive study of SMS parameters and allows to analyze the quantitative indicators of the flights safety level.The concepts of Acceptable Safety Level (ASL indicators are interpreted differently depending on the available/applicable methods of their evaluation and how to implement them in SMS. However, the indicators for assessing ASL under operational condition at the aviation enterprise should become universal. Currently, defined safety levels and safety indicators are not yet established functionally and often with distorted underrepresented models describing their contextual contents, as well as ways of integrating them into SMS aviation enterprise.The results obtained can be used for better implementation of SMS and solving problems determining the aviation enterprise technical level of flight safety.

Quality management tool

Energy Technology Data Exchange (ETDEWEB)

Lee, Tae Hun

2011-09-15

This book introduces basic conception of quality with characteristic, price, cost, and function, basic conception on quality management, introduction and operation of quality management, quality guaranteed and claim like handling of claim of goods, standards, and quality guaranteed method, basic tools of quality management such as Pareto diagram, characteristic diagram, cause-and-effect, fish born diagram check sheet histogram scatter diagram graph and stratification new seven tools of QC, quality deployment function and measurement system.

Quality management tool

International Nuclear Information System (INIS)

Lee, Tae Hun

2011-09-01

This book introduces basic conception of quality with characteristic, price, cost, and function, basic conception on quality management, introduction and operation of quality management, quality guaranteed and claim like handling of claim of goods, standards, and quality guaranteed method, basic tools of quality management such as Pareto diagram, characteristic diagram, cause-and-effect, fish born diagram check sheet histogram scatter diagram graph and stratification new seven tools of QC, quality deployment function and measurement system.

Management Tools

Science.gov (United States)

1987-01-01

Manugistics, Inc. (formerly AVYX, Inc.) has introduced a new programming language for IBM and IBM compatible computers called TREES-pls. It is a resource management tool originating from the space shuttle, that can be used in such applications as scheduling, resource allocation project control, information management, and artificial intelligence. Manugistics, Inc. was looking for a flexible tool that can be applied to many problems with minimal adaptation. Among the non-government markets are aerospace, other manufacturing, transportation, health care, food and beverage and professional services.

The Taskload-Efficiency-Safety-Buffer Triangle--development and validation with air traffic management.

Science.gov (United States)

Kallus, K Wolfgang; Hoffmann, Peter; Winkler, Hildegard; Vormayr, Elisabeth M

2010-02-01

The Taskload-Efficiency-Safety-Buffer Triangle (TEST) was developed as a new computerised scaling tool for quickly visualising changes in and trade-offs between the three critical factors that determine the work situation of air traffic management (ATM), i.e. taskload, efficiency and safety-buffers. Based on a task analysis of ATM and backed up by the stress-strain model, an easy-to-interpret triangle was constructed and validated both in simulated and real ATM workplaces. Results from the validation studies show that TEST does not only reflect the most relevant task characteristics, but also provides additional insights in the controllers' working styles. The TEST tool can make ATM safety surveys more efficient and help supervisors to decide about optimal times for opening or closing additional sectors. Statement of Relevance: TEST is a new tool to assess taskload, efficiency and safety-buffers in a joint scaling. It reflects increases in taskload and effects of taskload on safety-buffers and efficiency, as well as trade-offs in opposite directions. This tool might be very useful to check sector capacity in ATM and other high risk environments.

Managing nuclear safety at Point Lepreau

Energy Technology Data Exchange (ETDEWEB)

Paciga, J [New Brunswick Power, Point Lepreau NGS, PQ (Canada)

1997-12-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance).

Managing nuclear safety at Point Lepreau

International Nuclear Information System (INIS)

Paciga, J.

1997-01-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance)

Development of a multilevel health and safety climate survey tool within a mining setting.

Science.gov (United States)

Parker, Anthony W; Tones, Megan J; Ritchie, Gabrielle E

2017-09-01

This study aimed to design, implement and evaluate the reliability and validity of a multifactorial and multilevel health and safety climate survey (HSCS) tool with utility in the Australian mining setting. An 84-item questionnaire was developed and pilot tested on a sample of 302 Australian miners across two open cut sites. A 67-item, 10 factor solution was obtained via exploratory factor analysis (EFA) representing prioritization and attitudes to health and safety across multiple domains and organizational levels. Each factor demonstrated a high level of internal reliability, and a series of ANOVAs determined a high level of consistency in responses across the workforce, and generally irrespective of age, experience or job category. Participants tended to hold favorable views of occupational health and safety (OH&S) climate at the management, supervisor, workgroup and individual level. The survey tool demonstrated reliability and validity for use within an open cut Australian mining setting and supports a multilevel, industry specific approach to OH&S climate. Findings suggested a need for mining companies to maintain high OH&S standards to minimize risks to employee health and safety. Future research is required to determine the ability of this measure to predict OH&S outcomes and its utility within other mine settings. As this tool integrates health and safety, it may have benefits for assessment, monitoring and evaluation in the industry, and improving the understanding of how health and safety climate interact at multiple levels to influence OH&S outcomes. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Development of configuration risk management tool

International Nuclear Information System (INIS)

Masuda, Takahiro; Doi, Eiji

2003-01-01

Tokyo Electric Power Company (referred to as TEPCO hereinafter), and other Japanese utilities as well, have been trying to improve the capacity factor of their Nuclear Power Plants (NPPs) through modernization of Operation and Maintenance strategy. TEPCO intends to apply risk information to O and M field with maintaining or even improving both safety and production efficiency. Under these situations, TEPCO with some BWR utilities started to develop a Configuration Risk Management (CRM) tool that can estimate risk in various plant conditions due to configuration changes during outage. Moreover, we also intend to apply CRM to on-line maintenance (OLM) in the near future. This tool can calculate the Core Damage Frequency (CDF) according to given plant condition, such as SSCs availability, decay heat level and the inventory of coolant in both outage state and full-power operation. From deterministic viewpoint, whether certain configuration meet the related requirements of Technical Specifications. User-friendly interface is one of the important features of this tool because this enables the site engineers with little experience in PSA to quantify and utilize the risk information by this tool. (author)

[B-BS and occupational health and safety management systems: the SGSL certification].

Science.gov (United States)

Calabrese, G; Candura, G

2010-01-01

The social costs deriving from the lack of occupational safety, which nowadays constitute approximately 2.8% of the GDP, tend not to come down despite the regulations, the inspections and the sanctions. The problems may be ascribed both to a shortage of systemic actions and to inappropriate training of the workers. Possible solutions are represented by the adoption of organizational models (D. Lgs. 81 art. 30) and by the implementation of protocols such as the Behavior-Based Safety (B-BS). Organisational and Management Models have been introduced with art. 30 D.Lgs. 81/2008 and with art. 6 D.Lgs. 231/2001. The comparison between their requisites and the ones specified by the OHSAS 18001 standards, confirms the partial overlapping of the Organizational Models with the Occupational Health & Safety Management Systems. Nevertheless such Systems are rarely adopted by Italian companies and their implementation still doesn't grant complete effectiveness. The B-BS protocol is proving to be a tool of extraordinary value to increase the level of safety, especially when used along with the known Health & Safety Management Systems.

Occupational Safety. Hand Tools. Pre-Apprenticeship Phase 1 Training.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This self-paced student training module on safety when using hand tools is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to teach students the correct safety techniques for operating common hand- and arm-powered tools, including selection, maintenance, technique, and uses. The module may…

Program Management Tool

Science.gov (United States)

Gawadiak, Yuri; Wong, Alan; Maluf, David; Bell, David; Gurram, Mohana; Tran, Khai Peter; Hsu, Jennifer; Yagi, Kenji; Patel, Hemil

2007-01-01

The Program Management Tool (PMT) is a comprehensive, Web-enabled business intelligence software tool for assisting program and project managers within NASA enterprises in gathering, comprehending, and disseminating information on the progress of their programs and projects. The PMT provides planning and management support for implementing NASA programmatic and project management processes and requirements. It provides an online environment for program and line management to develop, communicate, and manage their programs, projects, and tasks in a comprehensive tool suite. The information managed by use of the PMT can include monthly reports as well as data on goals, deliverables, milestones, business processes, personnel, task plans, monthly reports, and budgetary allocations. The PMT provides an intuitive and enhanced Web interface to automate the tedious process of gathering and sharing monthly progress reports, task plans, financial data, and other information on project resources based on technical, schedule, budget, and management criteria and merits. The PMT is consistent with the latest Web standards and software practices, including the use of Extensible Markup Language (XML) for exchanging data and the WebDAV (Web Distributed Authoring and Versioning) protocol for collaborative management of documents. The PMT provides graphical displays of resource allocations in the form of bar and pie charts using Microsoft Excel Visual Basic for Application (VBA) libraries. The PMT has an extensible architecture that enables integration of PMT with other strategic-information software systems, including, for example, the Erasmus reporting system, now part of the NASA Integrated Enterprise Management Program (IEMP) tool suite, at NASA Marshall Space Flight Center (MSFC). The PMT data architecture provides automated and extensive software interfaces and reports to various strategic information systems to eliminate duplicative human entries and minimize data integrity

DART - for design basis justification and safety related information management

International Nuclear Information System (INIS)

Billington, A.; Blondiaux, P.; Boucau, J.; Cantineau, B.; Doumont, C.; Mared, A.

2000-01-01

DART is the acronym for Design Analysis Re-engineering Tool. It embodies a systematic and integrated approach to NPP safety re-assessment and configuration management, that makes use of Reverse Failure Mode and Effect Analysis in conjunction with a state-of-the-art relational database and a standardized data format, to permit long-term management of plant safety related information. The plant design is reviewed in a step-by-step logical fashion by constructing fault trees that identify the link between undesired consequences and their causes. Each failure cause identified in a fault tree is addressed by defining functional requirements, which are in turn addressed by documenting the specific manner in which the plant complies with the requirement. The database can be used to generate up-to-date plant safety related documents, including: SAR, Systems Descriptions, Technical Specifications and plant procedures. The approach is open-minded by nature and therefore is not regulatory driven, however the plant licensing basis will also be reviewed and documented within the same database such that a Regulatory Conformance Program may be integrated with the other safety documentation. This methodology can thus reconstitute the plant design bases in a comprehensive and systematic way, while allowing to uncover weaknesses in design. The original feature of the DART methodology is that it links all the safety related documents together, facilitating the evaluation of the safety impact resulting from any plant modification. Due to its capability to retrieve the basic justifications of the plant design, it is also a useful tool for training the young generation of plant personnel. The DART methodology has been developed for application to units 2, 3 and 4 at Vattenfall's Ringhals site in Sweden. It may be applied to any nuclear power plant or industrial facility where public safety is a concern. (author)

DART - for design basis justification and safety related information management

International Nuclear Information System (INIS)

Billington, A.; Blondiaux, B.; Boucau, J.; Cantineau, B.; Mared, A.

2001-01-01

DART is the acronym for Design Analysis Re-Engineering Tool. It embodies a systematic and integrated approach to NPP safety re-assessment and configuration management, that makes use of Reverse Failure Mode and Effect Analysis in conjunction with a state-of-the-art relational database and a standardized data format, to permit long-term management of plant safety related information. The plant design is reviewed in a step-by-step logical fashion by constructing fault trees that identify the link between undesired consequences and their causes. Each failure cause identified in a fault tree is addressed by defining functional requirements, which are in turn addressed by documenting the specific manner in which the plant complies with the requirement. The database can then be used to generate up-to-date plant safety related documents, including: SAR, Systems Descriptions, Technical Specifications and plant procedures. The approach is open-minded by nature and therefore is not regulatory driven, however the plant licensing basis will also be reviewed and documented within the same database such that a Regulatory Conformance Program may be integrated with the other safety documentation. This methodology can thus reconstitute the plant design bases in a comprehensive and systematic way, while allowing to uncover weaknesses in design. The original feature of the DART methodology is that it links all the safety related documents together, facilitating the evaluation of the safety impact resulting from any plant modification. Due to its capability to retrieve the basic justifications of the plant design, it is also a useful tool for training the young generation of plant personnel. The DART methodology has been developed for application to units 2, 3 and 4 at Vattenfall's Ringhals site in Sweden. It may be applied to any nuclear power plant or industrial facility where public safety is a concern. (author)

Communication's Role in Safety Management and Performance for the Road Safety Practices

OpenAIRE

Salim Keffane (s)

2014-01-01

Communication among organizations could play an important role in increasing road safety. To get in-depth knowledge of its role, this study measured managers' and employees' perceptions of the communication's role on six safety management and performance criteria for road safety practices by conducting a survey using a questionnaire among 165 employees and 135 managers. Path analysis using AMOS-19 software shows that some of the safety management road safety practices have high correlation wi...

Tools to support the self assessment of the performance of Food Safety Management Systems

NARCIS (Netherlands)

Luning, P.A.; Jacxsens, L.; Jasson, V.; Marcelis, W.J.; Kussaga, J.; Spiegel, van der M.; Koesta, M.; Oses Gomez, S.; Rovira, J.; Devlieghere, F.; Uyttendaele, M.

2010-01-01

Changes in food supply chains, health and demographic situations, lifestyle and social situations, environmental conditions, and increased legislative requirements have led to significant efforts in the development of quality and safety management systems in agribusiness and food industry worldwide

Shift in performance of food safety management systems in supply chains

NARCIS (Netherlands)

Nanyunja, Jessica; Jacxsens, Liesbeth; Kirezieva, Klementina; Kaaya, A.N.; Uyttendaele, Mieke; Luning, P.A.

2016-01-01

BACKGROUND: This study investigates the level of design and operation of food safety management systems (FSMS) of farmers and export traders in Kenya and Uganda. FSMS diagnostic tools developed for the fresh produce chain were used to assess the levels of context riskiness, FSMS activities and

Managing for safety at nuclear installations

International Nuclear Information System (INIS)

1996-01-01

This publication, by the Health and Safety Executive's (HSE's) Nuclear Safety Division (NSD), provides a statement of the criteria the Nuclear Installations Inspectorate (NII) uses to judge the adequacy of any proposed or existing system for managing a nuclear installation in so far as it affects safety. These criteria have been developed from the basic HSE model, described in the publication Successful health and safety management that applies to industry generally, in order to meet the additional needs for managing nuclear safety. In addition, the publication identifies earlier studies upon which this work was based together with the key management activities and outputs. (Author)

APMS: An Integrated Set of Tools for Measuring Safety

Science.gov (United States)

Statler, Irving C.; Reynard, William D. (Technical Monitor)

1996-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through

Safety management and public spaces: restoring balance.

Science.gov (United States)

Ball, David J; Ball-King, Laurence

2013-05-01

Since 2000, the reputation of health and safety in the United Kingdom has been tarnished, so much so that it has become the subject of both a media circus and a government inquiry. This not only threatens the worthy goals of health and safety, but also impacts upon the associated tool of risk assessment itself such that "risk assessment" is increasingly seen by the public at large as a term inviting ridicule, even abuse. The main thrust of the government's examination of health and safety has been its concern that safety requirements were placing a disproportionate burden on business. However, there is another source of discontent, which is public chagrin over the impact of injury control measures upon life beyond the conventional workplace, in particular upon the public spaces that people frequent in their leisure time and on the activities they engage in there. This article provides a perspective on this second dimension of the crisis in confidence. It describes how many U.K. agencies with responsibilities for a wide portfolio of public amenities ranging from the provision of play spaces for the young to the management of publicly accessible countryside, the maintenance of urban and rural trees, the stewardship of sites of cultural heritage, and the pursuit of outdoor educational activities have responded to some conflicts posed to their services by the new safety culture. It concludes with a discussion of implications for the management of public space and for risk assessment itself. © 2012 Society for Risk Analysis.

OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT IN ROMANIA IN VIEW OF THE ECONOMIC DEVELOPMENT OF SOCIETY

Directory of Open Access Journals (Sweden)

Rusu-Zagar Gilda

2013-07-01

Full Text Available Health and safety at work has become one of the most substantial and important sectors in the EU social policy over the last years.In Romania, the implementation of health and safety management systems is performed by: a systematic approach to problems, training and awareness, effective and efficient tools for managing a company's specific issues as well as involvement at all its organizational levels.The article deals with the implementation of the management systems for health and safety at work, which complements the enterprises' existing organizational system and promotes enforcement of the legislation regarding health and safety at work.Creating a healthier and safer working environment is a goal that exceeds the resources and expertise of a single institution or a single country.

Effective Safety Management in Construction Project

Science.gov (United States)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

Effective safety management is one of the serious problems in the construction industry worldwide, especially in large-scale construction projects. There have been significant reductions in the number and the rate of injury over the last 20 years. Nevertheless, construction remains as one of the high risk industry. The purpose of this study is to examine safety management in the Malaysian construction industry, as well as to highlight the importance of construction safety management. The industry has contributed significantly to the economic growth of the country. However, when construction safety management is not implemented systematically, accidents will happen and this can affect the economic growth of the country. This study put the safety management in construction project as one of the important elements to project performance and success. The study emphasize on awareness and the factors that lead to the safety cases in construction project.

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector.

Science.gov (United States)

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2016-03-01

The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = -0.33, p safety facilities and equipment (r = -0.32, p safety procedure (r = -0.27, p safety leadership and safety facility were significant predictors of turnover intention, (β = -0.28, p safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations.

Performance standards of road safety management

Directory of Open Access Journals (Sweden)

Čabarkapa Milenko R.

2016-01-01

Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

Study of industry safety management

International Nuclear Information System (INIS)

Park, Pil Su

1987-06-01

This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

STARS software tool for analysis of reliability and safety

International Nuclear Information System (INIS)

Poucet, A.; Guagnini, E.

1989-01-01

This paper reports on the STARS (Software Tool for the Analysis of Reliability and Safety) project aims at developing an integrated set of Computer Aided Reliability Analysis tools for the various tasks involved in systems safety and reliability analysis including hazard identification, qualitative analysis, logic model construction and evaluation. The expert system technology offers the most promising perspective for developing a Computer Aided Reliability Analysis tool. Combined with graphics and analysis capabilities, it can provide a natural engineering oriented environment for computer assisted reliability and safety modelling and analysis. For hazard identification and fault tree construction, a frame/rule based expert system is used, in which the deductive (goal driven) reasoning and the heuristic, applied during manual fault tree construction, is modelled. Expert system can explain their reasoning so that the analyst can become aware of the why and the how results are being obtained. Hence, the learning aspect involved in manual reliability and safety analysis can be maintained and improved

Management of safety and safety culture at the NPPs of Ukraine

International Nuclear Information System (INIS)

Koltakov, Vladimir

2002-01-01

The report contains general aspects of safety and safety culture. The brief description of operational characteristics and basic indexes of atomic power plants at the Ukraine are represented. The information referring to structure of NPPs of Operation organization license-holder, safety responsibility of both Regulatory and Utility Bodies also is given. The main part of the report include seven sections: 1. Practical application of safety management models; 2. erspective on the relationship between safety management and safety culture; 3. The role of leadership in achieving high standards of safety; 4. Current and future challengers that impact on safety culture and safety management (e.g. the impact of competition, changing, economic and political circumstances, workforce demographics, etc.); 5. Key lessons learned from major events; 6. Practical applications of safety culture concepts (e.g. learning organizations, training staff communications, etc.); 7. dvance in human performance. Some of the main pending safety and safety culture problems that are necessary to achieve in the near future are mentioned

Evaluating safety management system implementation

International Nuclear Information System (INIS)

Preuss, M.

2009-01-01

Canada is committed to not only maintaining, but also improving upon our record of having one of the safest aviation systems in the world. The development, implementation and maintenance of safety management systems is a significant step towards improving safety performance. Canada is considered a world leader in this area and we are fully engaged in implementation. By integrating risk management systems and business practices, the aviation industry stands to gain better safety performance with less regulatory intervention. These are important steps towards improving safety and enhancing the public's confidence in the safety of Canada's aviation system. (author)

[Road map for health and safety management systems in healthcare facilities, according to the OHSAS 18001:2007 standard].

Science.gov (United States)

Pugliese, F; Albini, E; Serio, O; Apostoli, P

2011-01-01

The 81/2008 Act has defined a model of a health and safety management system that can contribute to prevent the occupational health and safety risks. We have developed the structure of a health and safety management system model and the necessary tools for its implementation in health care facilities. The realization of a model is structured in various phases: initial review, safety policy, planning, implementation, monitoring, management review and continuous improvement. Such a model, in continuous evolution, is based on the responsibilities of the different corporate characters and on an accurate analysis of risks and involved norms.

Development of IFC based fire safety assesment tools

DEFF Research Database (Denmark)

Taciuc, Anca; Karlshøj, Jan; Dederichs, Anne

2016-01-01

Due to the impact that the fire safety design has on the building's layout and on other complementary systems, as installations, it is important during the conceptual design stage to evaluate continuously the safety level in the building. In case that the task is carried out too late, additional...... changes need to be implemented, involving supplementary work and costs with negative impact on the client. The aim of this project is to create a set of automatic compliance checking rules for prescriptive design and to develop a web application tool for performance based design that retrieves data from...... Building Information Models (BIM) to evacuate the safety level in the building during the conceptual design stage. The findings show that the developed tools can be useful in AEC industry. Integrating BIM from conceptual design stage for analyzing the fire safety level can ensure precision in further...

Investigation on regulatory requirements for radiation safety management

International Nuclear Information System (INIS)

Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

2013-01-01

NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

STRATEGIC MANAGEMENT ACCOUNTING: DEFINITION AND TOOLS

Directory of Open Access Journals (Sweden)

Nadiia Pylypiv

2017-08-01

Full Text Available The article is dedicated to learning the essence of the definition of “strategic management accounting” in domestic and foreign literature. Strategic management accounting tools has been studied and identified constraints that affect its choice. The result of the study is that the understanding of strategic management accounting was formed by authors. The tools which are common for both traditional managerial accounting and strategic and the specific tools necessary for efficient implementation of strategic management accounting have been defined. Keywords: strategic management accounting, definition, tools, strategic management decisions.

Biosensor: an emerging safety tool for meat industry.

Science.gov (United States)

Singh, Pradeep Kumar; Jairath, Gauri; Ahlawat, Satyavir Singh; Pathera, Ashok; Singh, Prashant

2016-04-01

The meat industry associated with the health hazards like deadly pathogens, veterinary drugs, pesticide residues, toxins and heavy metals is in need of a tool to tackle the awful situation and ensure safer product to consumer. The growth in the industry, global trade scenario, stringent laws and consumer awareness has placed an extra onus on the meat industry to meet out the expectations and demands. Biosensors are the latest tool of detection in the fast growing industries including the food industry. Hence an attempt is envisaged here to review the possibility of harnessing biosensors as tool of safety to safe guard the consumer health and address safety issues in reference to the common threats of concern in the meat industry.

Management of construction safety at KKNPP site

International Nuclear Information System (INIS)

Khare, P.K.

2016-01-01

Construction is considered as one of the most hazardous activities owing to the number of accidents and injuries. At KKNPP, management of industrial safety has been envisaged since the preliminary stage of construction planning, including design aspects. The governing principles of safety management are evolved from the Factories Act, 1948, the Atomic Energy(Factories) Rules, 1996, AERB safety guidelines on Control of works (2011) and Corporate HSE policy of NPCIL (2014). Numerous risk assessment and hazard control measures are adopted consistently to ensure a safe work environment during the construction, which includes Job Hazard Analysis, work permit through Computerized Maintenance Management System, safety procedures, exclusive safety training facility for the contractor's workmen, safety motivational measures, safety surveillance and reporting through Safety Related Deficiencies Management System. Assessment of efficacy of safety management system is continuously done through safety audits and observations are being circulated and discussed in committee meetings. Fire safety is also being taken care of since inception of project work. Well-equipped fire station with trained fire fighters was made available since the beginning as per AERB safety standard on fire protection system for Nuclear facilities. Fire prevention measures specific to the work are implemented during all activities. (author)

Examination of issues related to the development and implementation of real-time operational safety monitoring tools in the nuclear power industry

International Nuclear Information System (INIS)

Puglia, William J.; Atefi, Bahman

1995-01-01

In recent years, risk and reliability techniques have been increasingly used to optimize deterministic requirements and to improve the operational safety of nuclear power stations. This paper discusses the historical development and current status of implementation of real-time operational safety monitoring tools in the nuclear power industry worldwide. A safety monitor is defined as a PC-based risk management tool, based on a plant specific PSA, which can be used to manage plant safety during the day-to-day operation of a nuclear power plant by planning maintenance activities and providing advisory information to plant operational staff in order to avoid high risk plant configurations. As this technique has only been applied in a few plants worldwide, the technology is still evolving and there are several technical and implementation-related issues which still need to be resolved. This paper attempts to summarize all such issues and describe how they have been addressed in several different applications of this technology around the world

Predicting safety culture: the roles of employer, operations manager and safety professional.

Science.gov (United States)

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Associations between safety climate and safety management practices in the construction industry.

Science.gov (United States)

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

COMSY- A Software Tool For Aging And Plant Life Management With An Integrated Documentation Tool

International Nuclear Information System (INIS)

Baier, Roman; Zander, Andre

2008-01-01

For the aging and plant life management the integrity of the mechanical components and structures is one of the key objectives. In order to ensure this integrity it is essential to implement a comprehensive aging management. This should be applied to all safety relevant mechanical systems or components, civil structures, electrical systems as well as instrumentation and control (I and C). The following aspects should be covered: - Identification and assessment of relevant degradation mechanisms; - Verification and evaluation of the quality status of all safety relevant systems, structures and components (SSC's); - Verification and modernization of I and C and electrical systems; - Reliable and up-to-date documentation. For the support of this issue AREVA NP GmbH has developed the computer program COMSY, which utilizes more than 30 years of experience resulting from research activities and operational experience. The program provides the option to perform a plant-wide screening for identifying system areas, which are sensitive to specific degradation mechanisms. Another object is the administration and evaluation of NDE measurements from different techniques. An integrated documentation tool makes the document management and maintenance fast, reliable and independent from staff service. (authors)

Safety Management and Safety Culture Self Assessment of Kartini Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Syarip, S., E-mail: syarip@batan.go.id [Centre for Accelerator and Material Process Technology, National Nuclear Energy Agency (BATAN), Yogyakarta (Indonesia)

2014-10-15

The self-assessment of safety culture and safety management status of Kartini research reactor is a step to foster safety culture and management by identifying good practices and areas for improvement, and also to improve reactor safety in a whole. The method used in this assessment is based on questionnaires provided by the Forum for Nuclear Cooperation in Asia (FNCA), then reviewed by experts. Based on the assessment and evaluation results, it can be concluded that there were several good practices in maintaining the safety status of Kartini reactor such as: reactor operators and radiation protection workers were aware and knowledgeable of the safety standards and policies that apply to their operation, readily accept constructive criticism from their management and from the inspectors of regulatory body that address safety performance. As a proof, for the last four years the number of inspection/audit findings from Regulatory Body (BAPETEN) tended to decrease while the reactor utilization and its operating hour increased. On the other hands there were also some comments and recommendations for improvement of reactor safety culture, such as that there should be more frequent open dialogues between employees and managers, to grow and attain a mutual support to achieve safety goals. (author)

Study on Food Quality and Safety Management Based on Hotel Management

OpenAIRE

Shi Zengye

2017-01-01

In recent years, with the frequent occurrence of food safety problems, people have begun to pay attention to food safety, especially the food safety of hotels. This paper proposed a Hazard Analysis and Critical Control Point (HACCP) management system to analyze food safety issues of hotels in order to improve the food quality and safety in hotel management. Through the practical application of the HACCP management system in the hotel catering industry, it was found that the amount of bacteria...

VRLane: a desktop virtual safety management program for underground coal mine

Science.gov (United States)

Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

2008-10-01

VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

NEAMS Nuclear Waste Management IPSC: evaluation and selection of tools for the quality environment

International Nuclear Information System (INIS)

Bouchard, Julie F.; Stubblefield, William Anthony; Vigil, Dena M.; Edwards, Harold Carter

2011-01-01

The objective of the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation Nuclear Waste Management Integrated Performance and Safety Codes (NEAMS Nuclear Waste Management IPSC) is to provide an integrated suite of computational modeling and simulation (M and S) capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive-waste storage facility or disposal repository. These M and S capabilities are to be managed, verified, and validated within the NEAMS Nuclear Waste Management IPSC quality environment. M and S capabilities and the supporting analysis workflow and simulation data management tools will be distributed to end-users from this same quality environment. The same analysis workflow and simulation data management tools that are to be distributed to end-users will be used for verification and validation (V and V) activities within the quality environment. This strategic decision reduces the number of tools to be supported, and increases the quality of tools distributed to end users due to rigorous use by V and V activities. This report documents an evaluation of the needs, options, and tools selected for the NEAMS Nuclear Waste Management IPSC quality environment. The objective of the U.S. Department of Energy (DOE) Office of Nuclear Energy Advanced Modeling and Simulation Nuclear Waste Management Integrated Performance and Safety Codes (NEAMS Nuclear Waste Management IPSC) program element is to provide an integrated suite of computational modeling and simulation (M and S) capabilities to assess quantitatively the long-term performance of waste forms in the engineered and geologic environments of a radioactive-waste storage facility or disposal repository. This objective will be fulfilled by acquiring and developing M and S capabilities, and establishing a defensible level of confidence in these M and S capabilities. The foundation for assessing the

Evidence-based and data-driven road safety management

Directory of Open Access Journals (Sweden)

Fred Wegman

2015-07-01

Full Text Available Over the past decades, road safety in highly-motorised countries has made significant progress. Although we have a fair understanding of the reasons for this progress, we don't have conclusive evidence for this. A new generation of road safety management approaches has entered road safety, starting when countries decided to guide themselves by setting quantitative targets (e.g. 50% less casualties in ten years' time. Setting realistic targets, designing strategies and action plans to achieve these targets and monitoring progress have resulted in more scientific research to support decision-making on these topics. Three subjects are key in this new approach of evidence-based and data-driven road safety management: ex-post and ex-ante evaluation of both individual interventions and intervention packages in road safety strategies, and transferability (external validity of the research results. In this article, we explore these subjects based on recent experiences in four jurisdictions (Western Australia, the Netherlands, Sweden and Switzerland. All four apply similar approaches and tools; differences are considered marginal. It is concluded that policy-making and political decisions were influenced to a great extent by the results of analysis and research. Nevertheless, to compensate for a relatively weak theoretical basis and to improve the power of this new approach, a number of issues will need further research. This includes ex-post and ex-ante evaluation, a better understanding of extrapolation of historical trends and the transferability of research results. This new approach cannot be realized without high-quality road safety data. Good data and knowledge are indispensable for this new and very promising approach.

Study on Food Quality and Safety Management Based on Hotel Management

Directory of Open Access Journals (Sweden)

Shi Zengye

2017-12-01

Full Text Available In recent years, with the frequent occurrence of food safety problems, people have begun to pay attention to food safety, especially the food safety of hotels. This paper proposed a Hazard Analysis and Critical Control Point (HACCP management system to analyze food safety issues of hotels in order to improve the food quality and safety in hotel management. Through the practical application of the HACCP management system in the hotel catering industry, it was found that the amount of bacteria greatly reduced and the pass rate of tableware disinfection increased significantly in the hotel's food processing links, while customer satisfaction greatly improved. Therefore, the HACCP management system had great applicability in improving the food quality and safety of hotels.

Failure Modes Effects and Criticality Analysis, an Underutilized Safety, Reliability, Project Management and Systems Engineering Tool

Science.gov (United States)

Mullin, Daniel Richard

2013-09-01

The majority of space programs whether manned or unmanned for science or exploration require that a Failure Modes Effects and Criticality Analysis (FMECA) be performed as part of their safety and reliability activities. This comes as no surprise given that FMECAs have been an integral part of the reliability engineer's toolkit since the 1950s. The reasons for performing a FMECA are well known including fleshing out system single point failures, system hazards and critical components and functions. However, in the author's ten years' experience as a space systems safety and reliability engineer, findings demonstrate that the FMECA is often performed as an afterthought, simply to meet contract deliverable requirements and is often started long after the system requirements allocation and preliminary design have been completed. There are also important qualitative and quantitative components often missing which can provide useful data to all of project stakeholders. These include; probability of occurrence, probability of detection, time to effect and time to detect and, finally, the Risk Priority Number. This is unfortunate as the FMECA is a powerful system design tool that when used effectively, can help optimize system function while minimizing the risk of failure. When performed as early as possible in conjunction with writing the top level system requirements, the FMECA can provide instant feedback on the viability of the requirements while providing a valuable sanity check early in the design process. It can indicate which areas of the system will require redundancy and which areas are inherently the most risky from the onset. Based on historical and practical examples, it is this author's contention that FMECAs are an immense source of important information for all involved stakeholders in a given project and can provide several benefits including, efficient project management with respect to cost and schedule, system engineering and requirements management

Ageing Management for Research Reactors. Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-10-15

This Safety Guide was developed under the IAEA programme for safety standards for research reactors, which covers all the important areas of research reactor safety. It supplements and elaborates upon the safety requirements for ageing management of research reactors that are established in paras 6.68-6.70 and 7.109 of the IAEA Safety Requirements publication, Safety of Research Reactors. The safety of a research reactor requires that provisions be made in its design to facilitate ageing management. Throughout the lifetime of a research reactor, including its decommissioning, ageing management of its structures, systems and components (SSCs) important to safety is required, to ensure continued adequacy of the safety level, reliable operation of the reactor, and compliance with the operational limits and conditions. Managing the safety aspects of research reactor ageing requires implementation of an effective programme for the monitoring, prediction, and timely detection and mitigation of degradation of SSCs important to safety, and for maintaining their integrity and functional capability throughout their service lives. Ageing management is defined as engineering, operation, and maintenance strategy and actions to control within acceptable limits the ageing degradation of SSCs. Ageing management includes activities such as repair, refurbishment and replacement of SSCs, which are similar to other activities carried out at a research reactor in maintenance and testing or when a modification project takes place. However, it is important to recognize that effective management of ageing requires the use of a methodology that will detect and evaluate ageing degradation as a consequence of the service conditions, and involves the application of countermeasures for prevention and mitigation of ageing degradation. The objective of this Safety Guide is to provide recommendations on managing ageing of SSCs important to safety at research reactors on the basis of international

Ageing Management for Research Reactors. Specific Safety Guide

International Nuclear Information System (INIS)

2010-01-01

This Safety Guide was developed under the IAEA programme for safety standards for research reactors, which covers all the important areas of research reactor safety. It supplements and elaborates upon the safety requirements for ageing management of research reactors that are established in paras 6.68-6.70 and 7.109 of the IAEA Safety Requirements publication, Safety of Research Reactors. The safety of a research reactor requires that provisions be made in its design to facilitate ageing management. Throughout the lifetime of a research reactor, including its decommissioning, ageing management of its structures, systems and components (SSCs) important to safety is required, to ensure continued adequacy of the safety level, reliable operation of the reactor, and compliance with the operational limits and conditions. Managing the safety aspects of research reactor ageing requires implementation of an effective programme for the monitoring, prediction, and timely detection and mitigation of degradation of SSCs important to safety, and for maintaining their integrity and functional capability throughout their service lives. Ageing management is defined as engineering, operation, and maintenance strategy and actions to control within acceptable limits the ageing degradation of SSCs. Ageing management includes activities such as repair, refurbishment and replacement of SSCs, which are similar to other activities carried out at a research reactor in maintenance and testing or when a modification project takes place. However, it is important to recognize that effective management of ageing requires the use of a methodology that will detect and evaluate ageing degradation as a consequence of the service conditions, and involves the application of countermeasures for prevention and mitigation of ageing degradation. The objective of this Safety Guide is to provide recommendations on managing ageing of SSCs important to safety at research reactors on the basis of international

Safety Management System in Croatia Control Ltd.

OpenAIRE

Pavlin, Stanislav; Sorić, Vedran; Bilać, Dragan; Dimnik, Igor; Galić, Daniel

2009-01-01

International Civil Aviation Organization and other international aviation organizations regulate the safety in civil aviation. In the recent years the International Civil Aviation Organization has introduced the concept of the safety management system through several documents among which the most important is the 2006 Safety Management Manual. It treats the safety management system in all the segments of civil aviation, from carriers, aerodromes and air traffic control to design, constructi...

Report of study group 4.3 ''pipeline integrity management and safety''

Energy Technology Data Exchange (ETDEWEB)

Clavel, P.

2000-07-01

This report highlights the Pipeline integrity Management methods being implemented by gas companies. These aim at maintaining the current high safety level, prevent major hazards, ensure the integrity of the pipeline and protect people and environment in the vicinity of the pipeline in the most cost effective way. It should be noticed that Pipeline Integrity Management aspects, technical and organisational, are included in the more general framework of the Safety Management System. Currently, more and more gas companies implement such a system on the basis of standards like ISO 9000 and so on. In this way, the report shows how practices of Pipeline Integrity Management are continually developing in order to adapt to their environment, and to improve performance. Past experience and imminent developments show that Pipeline Integrity Management is a flexible and efficient approach to improve safety in the long term. Consequently, Pipeline Integrity Management Systems are, under the control of authorities, the best alternative to additional safety regulations. Within the context of deregulation of the European markets and globalization Pipeline Integrity Management appears to be a tool to promote the gas industry in the eyes of the authorities, the market regulators and the customers (industrialists,...). (author)

PSA - a tool for the nuclear safety

International Nuclear Information System (INIS)

Himanen, R.

1992-01-01

The PSA-model for BWR-type reactors of Finnish power company, Teollisuuden Voima Oy (TVO) was finished in year 1989. This basic PSA model included all safety systems, normal operating systems and auxiliary systems. Today TVO is working to enlarge the PSA to level 2 (environmental effects, for the fires, for the floodings and the outages). The TVO's experiences has been showed the PSA an useful tool for the developing the safety of BWR's (orig.)

Use of the Home Safety Self-Assessment Tool (HSSAT) within Community Health Education to Improve Home Safety.

Science.gov (United States)

Horowitz, Beverly P; Almonte, Tiffany; Vasil, Andrea

2016-10-01

This exploratory research examined the benefits of a health education program utilizing the Home Safety Self-Assessment Tool (HSSAT) to increase perceived knowledge of home safety, recognition of unsafe activities, ability to safely perform activities, and develop home safety plans of 47 older adults. Focus groups in two senior centers explored social workers' perspectives on use of the HSSAT in community practice. Results for the health education program found significant differences between reported knowledge of home safety (p = .02), ability to recognize unsafe activities (p = .01), safely perform activities (p = .04), and develop a safety plan (p = .002). Social workers identified home safety as a major concern and the HSSAT a promising assessment tool. Research has implications for reducing environmental fall risks.

Evaluating Performance of Safety Management and Occupational Health Using Total Quality Safety Management Model (TQSM

Directory of Open Access Journals (Sweden)

E Mohammadfam

2015-11-01

Full Text Available Introduction: All organizations, whether public or private, necessitate performance evaluation systems in regard with growth, stability, and development in the competitive fields. One of the existing models for performance evaluation of occupational health and safety management is Total Quality Safety Management model (TQSM. Therefore, the present study aimed to evaluate performance of safety management and occupational health utilizing TQSM model. Methods: In this descriptive-analytic study, the population consisted of 16 individuals, including managers, supervisors, and members of technical protection and work health committee. Then the participants were asked to respond to TQSM questionnaire before and after the implementation of Occupational Health & Safety Advisory Services 18001 (OHSAS18001. Ultimately, the level of each program as well as the TQSM status were determined before and after the implementation of OHSAS18001. Results: The study results showed that the scores obtained by the company before OHSAS 18001’s implementation, was 43.7 out of 312. After implementing OHSAS 18001 in the company and receiving the related certificate, the total score of safety program that company could obtain was 127.12 out of 312 demonstrating a rise of 83.42 scores (26.8%. The paired t-test revealed that mean difference of TQSM scores before and after OHSAS 18001 implementation was proved to be significant (p> 0.05. Conclusion: The study findings demonstrated that TQSM can be regarded as an appropriate model in order to monitor the performance of safety management system and occupational health, since it possesses the ability to quantitatively evaluate the system performance.

Application of Risk Assessment Tools in the Continuous Risk Management (CRM) Process

Science.gov (United States)

Ray, Paul S.

2002-01-01

Marshall Space Flight Center (MSFC) of the National Aeronautics and Space Administration (NASA) is currently implementing the Continuous Risk Management (CRM) Program developed by the Carnegie Mellon University and recommended by NASA as the Risk Management (RM) implementation approach. The four most frequently used risk assessment tools in the center are: (a) Failure Modes and Effects Analysis (FMEA), Hazard Analysis (HA), Fault Tree Analysis (FTA), and Probabilistic Risk Analysis (PRA). There are some guidelines for selecting the type of risk assessment tools during the project formulation phase of a project, but there is not enough guidance as to how to apply these tools in the Continuous Risk Management process (CRM). But the ways the safety and risk assessment tools are used make a significant difference in the effectiveness in the risk management function. Decisions regarding, what events are to be included in the analysis, to what level of details should the analysis be continued, make significant difference in the effectiveness of risk management program. Tools of risk analysis also depends on the phase of a project e.g. at the initial phase of a project, when not much data are available on hardware, standard FMEA cannot be applied; instead a functional FMEA may be appropriate. This study attempted to provide some directives to alleviate the difficulty in applying FTA, PRA, and FMEA in the CRM process. Hazard Analysis was not included in the scope of the study due to the short duration of the summer research project.

The use of case tools in OPG safety analysis code qualification

International Nuclear Information System (INIS)

Pascoe, J.; Cheung, A.; Westbye, C.

2001-01-01

Ontario Power Generation (OPG) is currently qualifying its critical safety analysis software. The software quality assurance (SQA) framework is described. Given the legacy nature of much of the safety analysis software the reverse engineering methodology has been adopted. The safety analysis suite of codes was developed over a period of many years to differing standards of quality and had sparse or incomplete documentation. Key elements of the reverse engineering process require recovery of design information from existing coding. This recovery, if performed manually, could represent an enormous effort. Driven by a need to maximize productivity and enhance the repeatability and objectivity of software qualification activities the decision was made to acquire or develop and implement Computer Aided Software Engineering (CASE) tools. This paper presents relevant background information on CASE tools and discusses how the OPG SQA requirements were used to assess the suitability of available CASE tools. Key findings from the application of CASE tools to the qualification of the OPG safety analysis software are discussed. (author)

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

International Nuclear Information System (INIS)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla

2004-11-01

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Safety management in research and development organisation

International Nuclear Information System (INIS)

Nivedha, T.

2016-01-01

Health and safety is one of the most important aspects of an organizations smooth and effective functioning. It depends on the safety management, health management, motivation, leadership and training, welfare facilities, accident statistics, policy, organization and administration, hazard control and risk analysis, monitoring, statistics and reporting. Workplace accidents are increasingly common, main causes are untidiness, noise, too hot or cold environments, old or poorly maintained machines, and lack of training or carelessness of employees. One of the biggest issues facing employers today is the safety of their employees. This study aims at analyzing the occupational health and safety of Research organization in Indira Gandhi Centre for Atomic Research by gathering information on health management, safety management, motivation, leadership and training, welfare facilities, accident statistics, organization and administration, hazard control and risk analysis, monitoring, statistics and reporting. Data were collected by using questionnaires which were developed on health and safety management system. (author)

Management concepts and safety applications for nuclear fuel facilities

International Nuclear Information System (INIS)

Eisner, H.; Scotti, R.S.

1995-05-01

This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities

Management concepts and safety applications for nuclear fuel facilities

Energy Technology Data Exchange (ETDEWEB)

Eisner, H.; Scotti, R.S. [George Washington Univ., Washington, DC (United States). School of Engineering and Applied Science; Delicate, W.S. [KEVRIC Co., Inc., Silver Spring, MD (United States)

1995-05-01

This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities.

Reload safety analysis automation tools

International Nuclear Information System (INIS)

Havlůj, F.; Hejzlar, J.; Vočka, R.

2013-01-01

Performing core physics calculations for the sake of reload safety analysis is a very demanding and time consuming process. This process generally begins with the preparation of libraries for the core physics code using a lattice code. The next step involves creating a very large set of calculations with the core physics code. Lastly, the results of the calculations must be interpreted, correctly applying uncertainties and checking whether applicable limits are satisfied. Such a procedure requires three specialized experts. One must understand the lattice code in order to correctly calculate and interpret its results. The next expert must have a good understanding of the physics code in order to create libraries from the lattice code results and to correctly define all the calculations involved. The third expert must have a deep knowledge of the power plant and the reload safety analysis procedure in order to verify, that all the necessary calculations were performed. Such a procedure involves many steps and is very time consuming. At ÚJV Řež, a.s., we have developed a set of tools which can be used to automate and simplify the whole process of performing reload safety analysis. Our application QUADRIGA automates lattice code calculations for library preparation. It removes user interaction with the lattice code and reduces his task to defining fuel pin types, enrichments, assembly maps and operational parameters all through a very nice and user-friendly GUI. The second part in reload safety analysis calculations is done by CycleKit, a code which is linked with our core physics code ANDREA. Through CycleKit large sets of calculations with complicated interdependencies can be performed using simple and convenient notation. CycleKit automates the interaction with ANDREA, organizes all the calculations, collects the results, performs limit verification and displays the output in clickable html format. Using this set of tools for reload safety analysis simplifies

IDMT, Integrated Decommissioning Management Tools

International Nuclear Information System (INIS)

Alemberti, A.; Castagna, P.; Marsiletti, M.; Orlandi, S.; Perasso, L.; Susco, M.

2005-01-01

Nuclear Power Plant decommissioning requires a number of demolition activities related to civil works and systems as well as the construction of temporary facilities used for treatment and conditioning of the dismantled parts. The presence of a radiological, potentially hazardous, environment due to the specific configuration and history of the plant require a professional, expert and qualified approach approved by the national safety authority. Dismantling activities must be designed, planned and analysed in detail during an evaluation phase taking into account different scenarios generated by possible dismantling sequences and specific waste treatments to be implemented. The optimisation process of the activities becomes very challenging taking into account the requirement of the minimisation of the radiological impact on exposed workers and people during normal and accident conditions. While remote operated equipment, waste treatment and conditioning facilities may be designed taking into account this primary goal also a centralised management system and corresponding software tools have to be designed and operated in order to guarantee the fulfilment of the imposed limits as well as the traceability of wastes. Ansaldo Nuclear Division has been strongly involved in the development of a qualified and certified software environment to manage the most critical activities of a decommissioning project. The IDMT system (Integrated Decommissioning Management Tools) provide a set of stand alone user friendly applications able to work in an integrated configuration to guarantee waste identification, traceability during treatment and conditioning process as well as location and identification at the Final Repository site. Additionally, the system can be used to identify, analyse and compare different specific operating scenarios to be optimised in term of both economical and radiological considerations. The paper provides an overview of the different phases of

Nuclear safety management at the Wolsong NGS

Energy Technology Data Exchange (ETDEWEB)

Bong-Seob, Han [Korea Electric Power Corp., Wolson NPP no. 1 and 2 (Korea, Republic of)

1997-12-01

Nuclear safety management at the Wolsong nuclear power plant is described, including the following issues: site selection; plant history; operational goals; operational guidelines; reactor safety; safety training; plant maintenance; management of plant equipment lifetime; future tasks.

Nuclear safety management at the Wolsong NGS

International Nuclear Information System (INIS)

Han Bong-Seob

1997-01-01

Nuclear safety management at the Wolsong nuclear power plant is described, including the following issues: site selection; plant history; operational goals; operational guidelines; reactor safety; safety training; plant maintenance; management of plant equipment lifetime; future tasks

Airline Safety Management: The development of a proactive safety mechanism model for the evolution of safety management system

OpenAIRE

Hsu, Yueh-Ling

2004-01-01

The systemic origins of many accidents have led to heightened interest in the way in which organisations identify and manage risks within the airline industry. The activities which are thought to represent the term "organisational accident", "safety culture" and "proactive approach" are documented and seek to explain the fact that airlines differ in their willingness and ability to conduct safety management. However, an important but yet relatively undefined task in the airline...

INNOVATION MANAGEMENT TOOLS IN PUBLISHING COMPANIES

Directory of Open Access Journals (Sweden)

A. Shegda

2013-09-01

Full Text Available This article is devoted to the highly topical issue of modern publishing business as innovation management. introduction of technological innovation, measured as a promising strategy for the development of a constructive industry. The paper deals with main problems in managing of publishing companies. The reference consider of innovation management tools. In the article are exams the problems of books trend decline which require publishers introducing innovative methods of production and distribution. It was found that while the tools can be used. The process of innovation management with the following basic tools like as marketing innovation bench marketing, franchising, engineering innovation. It was found that while the tools can be used. So, the aim of the article is to analyze the modern tools of innovation management in the publishing field.

KIT safety management. Annual report 2012

International Nuclear Information System (INIS)

Frank, Gerhard

2013-01-01

The KIT Safety Management Service Unit (KSM) guarantees radiological and conventional technical safety and security of Karlsruhe Institute of Technology and controls the implementation and observation of legal environmental protection requirements. KSM is responsible for - licensing procedures, - industrial safety organization, - control of environmental protection measures, - planning and implementation of emergency preparedness and response, - operation of radiological laboratories and measurement stations, - extensive radiation protection support and the - the execution of security tasks in and for all organizational units of KIT. Moreover, KSM is in charge of wastewater and environmental monitoring for all facilities and nuclear installations all over the KIT campus. KSM is headed by the Safety Commissioner of KIT, who is appointed by the Presidential Committee. Within his scope of procedure for KIT, the Safety Commissioner controls the implementation of and compliance with safety-relevant requirements. The KIT Safety Management is certified according to DIN EN ISO 9001, its industrial safety management is certified by the VBG as ''AMS-Arbeitsschutz mit System'' and, hence, fulfills the requirements of NLF / ISO-OSH 2001. KSM laboratories are accredited according to DIN EN ISO/IEC 17025. To the extent possible, KSM is committed to maintaining competence in radiation protection and to supporting research and teaching activities. The present reports lists the individual tasks of the KIT Safety Management and informs about the results achieved in 2012. Status figures in principle reflect the status at the end of the year 2012. The processes described cover the areas of competence of KSM.

Integrating risk management and safety culture in a framework for risk informed decision making

International Nuclear Information System (INIS)

Nelson, W.R.

2009-01-01

Operators and regulators of nuclear power plants agree on the importance of maintaining safety and controlling accident risks. Effective safety and risk management requires treatment of both technical and organizational components. Probabilistic Risk Assessment (PRA) provides tools for technical risk management. However, organizational factors are not treated in PRA, but are addressed using different approaches. To bring both components together, a framework of Risk Informed Decision Making (RIDM) is needed. The objective tree structure of the International Atomic Energy Agency (IAEA) is a promising approach to combine both elements. Effective collaboration involving regulatory and industry groups is needed to accomplish the integration. (author)

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla (Risk Analysis, Social and Decision Research Unit, Dept. of Psychology, Stockholm Univ., Stockholm (Sweden))

2004-11-15

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Safety management systems and their role in achieving high standards of operational safety

International Nuclear Information System (INIS)

Coulston, D.J.; Baylis, C.C.

2000-01-01

Achieving high standards of operational safety requires a robust management framework that is visible to all personnel with responsibility for its implementation. The structure of the management framework must ensure that all processes used to manage safety interlink in a logical and coherent manner, that is, they form a management system that leads to continuous improvement in safety performance. This Paper describes BNFL's safety management system (SMS). The SMS has management processes grouped within 5 main elements: 1. Policy, 2. Organisation, 3. Planning and Implementation, 4. Measuring and Reviewing Performance, 5. Audit. These elements reflect the overall process of setting safety objective (from Policy), measuring success and reviewing the performance. Effective implementation of the SMS requires senior managers to demonstrate leadership through their commitment and accountability. However, the SMS as a whole reflects that every employee at every level within BNFL is responsible for safety of operations under their control. The SMS therefore promotes a proactive safety culture and safe operations. The system is formally documented in the Company's Environmental, Health and Safety (EHS) Manual. Within in BNFL Group, the Company structures enables the Manual to provide overall SMS guidance and co-ordination to its range of nuclear businesses. Each business develops the SMS to be appropriate at all levels of its organisation, but ensuring that each level is consistent with the higher level. The Paper concludes with a summary of BNFL's safety performance. (author)

Review article: video-laryngoscopy: another tool for difficult intubation or a new paradigm in airway management?

Science.gov (United States)

Paolini, Jean-Baptiste; Donati, François; Drolet, Pierre

2013-02-01

An adequate airway management plan is essential for patient safety. Recently, new tools have been developed as alternatives to direct laryngoscopy and intubation. Among these, video-laryngoscopy has enjoyed a rapid increase in popularity and is now considered by many as the first-line technique in airway management. This paradigm shift may have an impact on patient safety. Studies show that video-laryngoscopes are associated with better glottic visualization, a higher success rate for difficult airways, and a faster learning curve, resulting in a higher success rate for intubations by novice physicians. Thus, unanticipated difficult intubations may be less frequent if video-laryngoscopy is used as the first-line approach. In addition, on-screen viewing by the operator creates a new dynamic interaction during airway management. The entire operating room team can assess progress in real time, which enhances communication and improves teaching. However, if video-laryngoscopes become standard tools for tracheal intubation, these more costly devices will need to be widely available in all locations where airway management is conducted. Furthermore, algorithms for difficult intubation will require modification, and the question of selecting alternate devices will arise. If the incidence of difficult intubation decreases, the lack of motivation to teach and learn the use of alternative devices might adversely impact patient safety. The greater effectiveness of video-laryngoscopes associated with multi-person visualization could enhance overall patient safety during airway management. However, the routine use of video-laryngoscopy also introduces some issues that need to be addressed to avoid potentially dangerous pitfalls.

Test tools of physics radiography children as a support for safety radiation and safety patients

International Nuclear Information System (INIS)

Siti Masrochah; Yeti Kartikasari; Ardi Soesilo Wibowo

2013-01-01

Radiographic examination of the thorax children aged 1-3 years have a high sufficiently failure. This failure is caused by the movement and difficulty positioning the patient, resulting in the risk of repeat radiographs to patient safety particularly unnecessary radiation risks. It is therefore necessary to develop research on children design fixation devices. This research aims to create a design tool fixation on radiographs children to support radiation safety and patient safety. This research is a descriptive exploratory approach to tool design. The independent variables were the design tools, variable tool function test results, and radiographic variables controlled thorax. The procedure is done by designing data collection tools, further trials with 20 samples. Processing and analysis of data is done by calculating the performance assessment tool scores with range 1-3. The results showed that the design tool of fixation in the form of standard radiographic cassette equipped with chairs and some form of seat belt fixation. The procedure uses a tool fixation is routine radiographic follow thorax child in an upright position. Function test results aids fixation is to have an average score of 2.66, which means good. While the test results for each component, the majority of respondents stated that the reliability of the device is quite good with a score of 2.45 (60 %), convenience tool with a score of 2.60 (70 %), quality of the radiographs did not incontinence of the thorax radiograph with a score 2.55 (85 %), the child protection (security) with a score of 2.70 (70 %), good design aesthetic design with a score of 2.80 (80 %), addition of radiation from the others on the use of these tools do not need with a score of 2.80 (80 %), and there is no additional radiation due to repetitions with a score of 2.85 (90 %). (author)

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

Science.gov (United States)

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (prisk-management practice, in a sustainable way.

Analysis and design on airport safety information management system

Directory of Open Access Journals (Sweden)

Yan Lin

2017-01-01

Full Text Available Airport safety information management system is the foundation of implementing safety operation, risk control, safety performance monitor, and safety management decision for the airport. The paper puts forward the architecture of airport safety information management system based on B/S model, focuses on safety information processing flow, designs the functional modules and proposes the supporting conditions for system operation. The system construction is helpful to perfecting the long effect mechanism driven by safety information, continually increasing airport safety management level and control proficiency．

Implementation of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

International Nuclear Information System (INIS)

Stewart, L.; Tonkay, D.

2004-01-01

This paper discusses the implementation of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. The Joint Convention: establishes a commitment with respect to safe management of spent nuclear fuel and radioactive waste; requires the Parties to ''take appropriate steps'' to ensure the safety of their spent fuel and waste management activities, but does not delineate standards the Parties must meet; and seeks to attain, through its Contracting Parties, a higher level of safety with respect to management of their spent nuclear fuel, disused sealed sources, and radioactive waste

Editorial safety science special issue road safety management.

NARCIS (Netherlands)

Wegman, F.C.M. & Hagezieker, M.P.

2014-01-01

The articles presented in this Special Issue on Road Safety Management represent an illustration of the growing interest in policy-related research in the area of road safety. The complex nature of this type of research combined with the observation that scientific journals pay limited attention to

Standardized safety management of AP1000 nuclear power plant

International Nuclear Information System (INIS)

Li Xingwen; Cao Zhiqiang; Cong Jiuyuan

2011-01-01

In 2002, China published and implemented the Law of the People's Republic of China on Work Safety and promulgated a series of guidelines and policies, which strengthened the safety management supervision. Standardization of safety, as another important step on safety supervision, comes after safety assesment and safety production licensing system, is also a permanent solution. Standardization of safety is a strategic, long term and fundamental work, which is also the basic access to achieving scientific safety management and increasing the inherent safety of an enterprise. Haiyang AP1000 nuclear power plant, adopting the modularized, 'open-top' and parallel construction means, overturned the traditional construction theory of installation work comes after the civil work and greatly shorten the construction period. At the same time, the notable increase of oversize module transportation and lifting and parallel construction raises higher demands for safety management. This article combines the characteristics and difficulties of safety management for Haiyang AP1000 nuclear power plant, puts forward ideas and methods for standardized safety management, and could also serve as reference to the safety management for other AP1000 projects. (authors)

Safety management in a competitiveness context

International Nuclear Information System (INIS)

Rousseau, J.M.

2013-01-01

This paper summarizes the first assessment performed by the IRSN related to the management of French power water reactors (PWR) safety. The conclusions of this assessment were submitted to the 'advisory committee' in April 2008. After an introduction reminding the French industrial and regulatory context as well as the way the assessment has been conducted, the relationship between safety and competitiveness is briefly discussed. Then the main issues and recommendations pointed out by the IRSN assessment are presented. These concern in particular: the balance between the shift operation team and the outage project team; the real-time decision-making capabilities of plant managers; the lessons learnt from the analyses of decision-making processes; the management of cultural changes. Finally, a conclusion presents a global diagnosis in terms of strengths and weaknesses of the EDF safety management system and proposes some ideas regarding the 'priority given to safety', the meaning of safety used by operative people and the continuous improvement approach. Lastly, methodological lessons are pointed out. The slides of the presentation have been added at the end of the paper. (author)

FOOD QUALITY MANAGEMENT AND SAFETY

OpenAIRE

Rizwana Khatoon; Debkumar Chakraborty; R.C. Chandni; Amar Sankar; A.V. Raghu

2017-01-01

Food safety system mainly focuses on identifying and preventing hazards that may lead product to deteriorate. The main important of manufacturing practice is a system that ensures that products meet food safety, quality and legal requirements. The hazard analysis and critical control point system, applies to food safety management, uses the approach of controlling critical points in food handling to prevent food safety problems. Besides enhancing food safety, other benefits of applying HACCP ...

The safety monitor and RCM workstation as complementary tools in risk based maintenance optimization

International Nuclear Information System (INIS)

Rawson, P.D.

2000-01-01

Reliability Centred Maintenance (RCM) represents a proven technique for rendering maintenance activities safer, more effective, and less expensive, in terms of systems unavailability and resource management. However, it is believed that RCM can be enhanced by the additional consideration of operational plant risk. This paper discusses how two computer-based tools, i.e., the RCM Workstation and the Safety Monitor, can complement each other in helping to create a living preventive maintenance strategy. (author)

Management commitment to safety vs. employee perceived safety training and association with future injury.

Science.gov (United States)

Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2012-07-01

The purpose of this study is to explore and examine, specific to the restaurant industry, two important constructs emerging from the safety climate literature: employee perceptions of safety training and management commitment to safety. Are these two separate constructs? Are there both individual- and shared group-level safety perceptions for these two constructs? What are the relationships between these two constructs and future injury outcomes? A total of 419 employees from 34 limited-service restaurants participated in a prospective cohort study. Employees' perceptions of management commitment to safety and safety training and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. Even though results showed that the correlation between employees'perceived safety training and management commitment to safety was high, confirmatory factor analysis of measurement models showed that two separate factors fit the model better than as two dimensions of a single factor. Homogeneity tests showed that there was a shared perception of the factor of management commitment to safety for the restaurant workers but there was no consistent perception among them for the factor of perceived safety training. Both individual employees'perceived management commitment to safety and perceptions of safety training can predict employees' subsequent injuries above and beyond demographic variables. However, there was no significant relationship between future injury and employees' shared perception of management commitment to safety. Further, our results suggest that the

Food Safety Practices Assessment Tool: An Innovative Way to Test Food Safety Skills among Individuals with Special Needs

Science.gov (United States)

Carbone, Elena T.; Scarpati, Stanley E.; Pivarnik, Lori F.

2013-01-01

This article describes an innovative assessment tool designed to evaluate the effectiveness of a food safety skills curriculum for learners receiving special education services. As schools respond to the increased demand for training students with special needs about food safety, the need for effective curricula and tools is also increasing. A…

Tool and its management for nuclear power plant

International Nuclear Information System (INIS)

Yan Rui

2000-01-01

The tool and its management are a necessary part for the operation and maintenance of NPP.And NPP tool management is,in fact.a process of study, allocation, development, procurement, utilization, decontamination and scrap of the tools needed in the operation and outage, and also includes the organization, coordination and control of the whole process. NPP shall strengthen the scientific management of the process from procurement to scrap. According to its scale and characteristics, NPP may, implement unified and centralized management policy, establish necessary tool management organization, define the responsibilities of the management departments, make relevant management regulations and perfect tool quality assurance system to bring the tools into full play.Furthermore, the development and application of special management software provides a quite efficient means for the realization of scientific management of tools in NPP

Safety research activities on radioactive waste management in JNES

International Nuclear Information System (INIS)

Otsuka, Ichiro; Aoki, Hiroomi; Suko, Takeshi; Onishi, Yuko; Masuda, Yusuke; Kato, Masami

2010-01-01

Research activities in safety regulation of radioactive waste management are presented. Major activities are as follows. As for the geological disposal, major research areas are, developing 'safety indicators' to judge the adequacy of site investigation results presented by an implementer (NUMO), compiling basic requirements of safety design and safety assessment needed to make a safety review of the license application and developing an independent safety assessment methodology. In proceeding research, JNES, Japan Atomic Energy Agency (JAEA) and the National Institute of Advanced Industrial Science and Technology (AIST) signed an agreement of cooperative study on geological disposal in 2007. One of the ongoing joint studies under this agreement has been aimed at investigating regional-scale hydrogeological modeling using JAEA's Horonobe Underground Research Center. In the intermediate depth disposal, JNES conducted example analysis of reference facility and submitted the result to Nuclear Safety Commission of Japan (NSC). JNES is also listing issues to be addressed in the safety review of the license application and tries to make criteria of the review. Furthermore, JNES is developing analysis tool to evaluate long term safety of the facility and conducting an experiment to investigate long term behavior of engineered barrier system. In the near surface disposal of waste package, it must be confirmed by a regulatory inspector whether each package meets safety requirements. JNES continuously updates the confirmation methodology depending on new processing technologies. The clearance system was established in 2005. Two stages of regulatory involvement were adapted, 1) approval for measurement and judgment methods developed by the nuclear operator and 2) confirmation of measurement and judgment results based on approved methods. JNES is developing verification methodology for each stage. As for decommissioning, based on the regulatory needs and a research program

Managing Epilepsy Well: Emerging e-Tools for epilepsy self-management.

Science.gov (United States)

Shegog, Ross; Bamps, Yvan A; Patel, Archna; Kakacek, Jody; Escoffery, Cam; Johnson, Erica K; Ilozumba, Ukwuoma O

2013-10-01

The Managing Epilepsy Well (MEW) Network was established in 2007 by the Centers for Disease Control and Prevention Epilepsy Program to expand epilepsy self-management research. The network has employed collaborative research strategies to develop, test, and disseminate evidence-based, community-based, and e-Health interventions (e-Tools) for epilepsy self-management for people with epilepsy, caregivers, and health-care providers. Since its inception, MEW Network collaborators have conducted formative studies (n=7) investigating the potential of e-Health to support epilepsy self-management and intervention studies evaluating e-Tools (n=5). The MEW e-Tools (the MEW website, WebEase, UPLIFT, MINDSET, and PEARLS online training) and affiliated e-Tools (Texting 4 Control) are designed to complement self-management practices in each phase of the epilepsy care continuum. These tools exemplify a concerted research agenda, shared methodological principles and models for epilepsy self-management, and a communal knowledge base for implementing e-Health to improve quality of life for people with epilepsy. © 2013.

APMS: An Integrated Suite of Tools for Measuring Performance and Safety

Science.gov (United States)

Statler, Irving C.; Lynch, Robert E.; Connors, Mary M. (Technical Monitor)

1997-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through

Developing a strong safety culture - a safety management challenge

International Nuclear Information System (INIS)

Low, M.; Gipson, G. P.; Williams, M.

1995-01-01

The approach is presented adapted by Nuclear Electric to build a strong safety culture through the development of its safety management system. Two features regarded as critical to a strong safety culture are: provision of effective communications to promote an awareness and ownership of safety among craft, and commitment to continuous improvement with a genuine willingness to learn from own experiences and those from others. (N.T.) 5 refs., 4 figs., 1 tab

Inspirations from Dupont Safety Management System

Institute of Scientific and Technical Information of China (English)

Ma Yong

2009-01-01

@@ Dupont,with its 200 years of safety management experience,tells us:all safety accidents can be prevented. Dupont has a history of more than 200 years,the concept of "safety is priority"has never changed.Dupont is just another word for safety.

Managing Safety and Operations: The Effect of Joint Management System Practices on Safety and Operational Outcomes.

Science.gov (United States)

Tompa, Emile; Robson, Lynda; Sarnocinska-Hart, Anna; Klassen, Robert; Shevchenko, Anton; Sharma, Sharvani; Hogg-Johnson, Sheilah; Amick, Benjamin C; Johnston, David A; Veltri, Anthony; Pagell, Mark

2016-03-01

The aim of this study was to determine whether management system practices directed at both occupational health and safety (OHS) and operations (joint management system [JMS] practices) result in better outcomes in both areas than in alternative practices. Separate regressions were estimated for OHS and operational outcomes using data from a survey along with administrative records on injuries and illnesses. Organizations with JMS practices had better operational and safety outcomes than organizations without these practices. They had similar OHS outcomes as those with operations-weak practices, and in some cases, better outcomes than organizations with safety-weak practices. They had similar operational outcomes as those with safety-weak practices, and better outcomes than those with operations-weak practices. Safety and operations appear complementary in organizations with JMS practices in that there is no penalty for either safety or operational outcomes.

Restaurant manager and worker food safety certification and knowledge.

Science.gov (United States)

Brown, Laura G; Le, Brenda; Wong, Melissa R; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A

2014-11-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N=387) and workers (N=365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge.

Restaurant Manager and Worker Food Safety Certification and Knowledge

Science.gov (United States)

Brown, Laura G.; Le, Brenda; Wong, Melissa R.; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A.

2017-01-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N = 387) and workers (N = 365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge. PMID:25361386

Use of a Computerized Tool (ORAM) to Help Manage Outage Safety and Risk at NPP Krsko

International Nuclear Information System (INIS)

Spiler, J.; Basic, I.; Vrbanic, I.; Fifnja, I.; Kastelan, M.; Dagan, W. J.; Shanley, L. B.; Naum, T. J.

1998-01-01

Outage Risk Assessment and Management (ORAM) is a computerized methodology developed by the U.S. Electric Power Research Institute (EPRI) to help Nuclear Power Plant personnel manage the risk and safety associated with refueling and forced plant outages. Today, over 60 plants including NPP Krsko are using ORAM during the preparation and performance of plant outages. In fact, many plants are attributing much of the reductions in the duration of refueling outages to the use of ORAM. The success of the ORAM methodology is the capability to provide plant and management personnel with understandable results from both deterministic evaluations of plant safety and quantitative risk assessments. The Nuklearna Elektrarna Krsko (NEK) use of ORAM involves both of these approaches. The deterministic portion of ORAM is used to model the NPP Krsko Shutdown Technical Specifications and administrative considerations. The probabilistic portion of ORAM uses industry and NEK specific initiating events and other risk elements pertaining to shutdown to derive a quantitative risk assessment for various end states, including core damage and RCS boiling. This paper expands on the value of each approach and demonstrates the benefits of combining these elements in the decision-making process. Another key advantage of ORAM is the ability to apply the methodology to specific outages. Since no outage is identical, this provides tremendous benefits to plant personnel for managing the safety and risk of a particular outage. ORAM does this ba organizing all of the various plant configurations and equipment unavailability windows into numerous plant states. Furthermore, ORAM evaluations can be a utomated b y interfacing with outage scheduling software programs such as Primavera. For each plant state, the deterministic and the probabilistic logic evaluations are applied. This paper will demonstrate the ORAM evaluation for an actual NPP Krsko outage. (author)

Safety culture improvement. An adaptive management framework

International Nuclear Information System (INIS)

Obadia, Isaac Jose

2005-01-01

After the Chernobyl nuclear accident in 1986, the International Atomic Energy Agency (IAEA) established the safety culture concept as a proactive mean to contribute to safety improvement, starting a worldwide safety culture enhancement program within nuclear organizations mainly focused on nuclear power plants. More recently, the safety culture concept has been extended to non-power applications such as nuclear research reactors and nuclear technological research and development organizations. In 1999, the Nuclear Engineering Institute (IEN), a research and technological development unit of the Brazilian Nuclear Energy Commission (CNEN), started a management change program aiming at improving its performance level of excellence. This change program has been developed assuming the occurrence of complex causal inter-relationships between the organizational culture and the implementation of the management process. A systematic and adaptive management framework comprised of a safety culture improvement practice integrated to a management process based on the Criteria for Excellence of the Brazilian Quality Award Model, has been developed and implemented at IEN. The case study has demonstrated that the developed framework makes possible an effective safety culture improvement and simultaneously facilitates an effective implementation of the management process, thus providing some governance to the change program. (author)

An Integrated Development Tool for a safety application using FBD language

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Jun; Lee, Jang Soo; Lee, Dong Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

Regarding digitalizing the Nuclear Instrumentation and Control Systems, the application program responsible for the safety functions of Nuclear I and C Systems shall ensure the robustness of the safety function through development, testing, and validation roles for a life cycle process during software development. The importance of software in nuclear systems increases continuously. The integrated engineering tools to develop, test, and validate safety application programs require increasingly more complex parts among a number of components within nuclear digital I and C systems. This paper introduces the integrated engineering tool (SafeCASE-PLC) developed by our project. The SafeCASE-PLC is a kind of software engineering tool to develop, test, and validate the nuclear application program performed in an automatic controller

STRATEGIC MANAGEMENT ACCOUNTING: DEFINITION AND TOOLS

OpenAIRE

Pylypiv, Nadiia; Pіatnychuk, Iryna

2017-01-01

The article is dedicated to learning the essence of the definition of “strategic management accounting” in domestic and foreign literature. Strategic management accounting tools has been studied and identified constraints that affect its choice. The result of the study is that the understanding of strategic management accounting was formed by authors. The tools which are common for both traditional managerial accounting and strategic and the specific tools necessary for efficient implementati...

Risk management and safety

International Nuclear Information System (INIS)

Niehaus, F.; Novegno, A.

1985-01-01

Risk assessment, including probabilistic analyses, has made great progress over the past decade. In spite of the inherent uncertainties it has now become possible to utilize methods and results for decision making at various levels. This paper will, therefore, review risk management in industrial installations, risk management for energy safety policy and prospects of risk management in highly industrialized areas. (orig.) [de

Workplace safety management as correlates of wellbeing among ...

African Journals Online (AJOL)

Workplace safety management as correlates of wellbeing among factory ... working in manufacturing firms do not enjoy the desirable level of wellbeing ... Keywords: employees' wellbeing, safety management, workers safety training, design of ...

Safety management in the industry

International Nuclear Information System (INIS)

Jaecklin, A.

1996-01-01

The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

[Process management in the hospital pharmacy for the improvement of the patient safety].

Science.gov (United States)

Govindarajan, R; Perelló-Juncá, A; Parès-Marimòn, R M; Serrais-Benavente, J; Ferrandez-Martí, D; Sala-Robinat, R; Camacho-Calvente, A; Campabanal-Prats, C; Solà-Anderiu, I; Sanchez-Caparrós, S; Gonzalez-Estrada, J; Martinez-Olalla, P; Colomer-Palomo, J; Perez-Mañosas, R; Rodríguez-Gallego, D

2013-01-01

To define a process management model for a hospital pharmacy in order to measure, analyse and make continuous improvements in patient safety and healthcare quality. In order to implement process management, Igualada Hospital was divided into different processes, one of which was the Hospital Pharmacy. A multidisciplinary management team was given responsibility for each process. For each sub-process one person was identified to be responsible, and a working group was formed under his/her leadership. With the help of each working group, a risk analysis using failure modes and effects analysis (FMEA) was performed, and the corresponding improvement actions were implemented. Sub-process indicators were also identified, and different process management mechanisms were introduced. The first risk analysis with FMEA produced more than thirty preventive actions to improve patient safety. Later, the weekly analysis of errors, as well as the monthly analysis of key process indicators, permitted us to monitor process results and, as each sub-process manager participated in these meetings, also to assume accountability and responsibility, thus consolidating the culture of excellence. The introduction of different process management mechanisms, with the participation of people responsible for each sub-process, introduces a participative management tool for the continuous improvement of patient safety and healthcare quality. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

THE CONFORMITY OF MACHINE TOOLS WITH RESPECT TO EUROPEAN SAFETY STANDARDS

CERN Multimedia

TIS/TE

2001-01-01

European regulations require that all motorized machine tools conform to the latest safety standards by the end of the year 2000. CERN must follow these regulations and has already modified most of its machine tools accordingly. However, there is still a small number of machine tools which have not yet been modified as required. These machines should not be used until they are brought up to the required safety standards, failing which the machines should be discarded. One can recognise which machine tools conform with the latest standards by the indication 'CS' on the identification plate of the machine, see foto below. In cases of doubt about the status of a machine tool you should contact K. Altherr/EST or C. Margaroli/TIS for advice.

THE CONFORMITY OF MACHINE TOOLS WITH RESPECT TO EUROPEAN SAFETY STANDARDS

CERN Multimedia

TIS/TE

2000-01-01

European regulations require that all motorized machine tools conform to the latest safety standards by the end of the year 2000. CERN must follow these regulations and has already modified most of its machine tools accordingly. However, there is still a small number of machine tools which have not yet been modified as required. These machines should not be used until they are brought up to the required safety standards, failing which the machines should be discarded. One can recognise which machine tools conform with the latest standards by the indication 'CS' on the identification plate of the machine, see foto below. In cases of doubt about the status of a machine tool you should contact K. Altherr/EST or C. Margaroli/TIS for advice.

Occupational safety management: the role of causal attribution.

Science.gov (United States)

Gyekye, Seth Ayim

2010-12-01

The paper addresses the causal attribution theory, an old and well-established theme in social psychology which denotes the everyday, commonsense explanations that people use to explain events and the world around them. The attribution paradigm is considered one of the most appropriate analytical tools for exploratory and descriptive studies in social psychology and organizational literature. It affords the possibility of describing accident processes as objectively as possible and with as much detail as possible. Causal explanations are vital to the formal analysis of workplace hazards and accidents, as they determine how organizations act to prevent accident recurrence. Accordingly, they are regarded as fundamental and prerequisite elements for safety management policies. The paper focuses primarily on the role of causal attributions in occupational and industrial accident analyses and implementation of safety interventions. It thus serves as a review of the contribution of attribution theory to occupational and industrial accidents. It comprises six sections. The first section presents an introduction to the classic attribution theories, and the second an account of the various ways in which the attribution paradigm has been applied in organizational settings. The third and fourth sections review the literature on causal attributions and demographic and organizational variables respectively. The sources of attributional biases in social psychology and how they manifest and are identified in the causal explanations for industrial and occupational accidents are treated in the fifth section. Finally, conclusion and recommendations are presented. The recommendations are particularly important for the reduction of workplace accidents and associated costs. The paper touches on the need for unbiased causal analyses, belief in the preventability of accidents, and the imperative role of management in occupational safety management.

Watershed Management Optimization Support Tool (WMOST) ...

Science.gov (United States)

EPA's Watershed Management Optimization Support Tool (WMOST) version 2 is a decision support tool designed to facilitate integrated water management by communities at the small watershed scale. WMOST allows users to look across management options in stormwater (including green infrastructure), wastewater, drinking water, and land conservation programs to find the least cost solutions. The pdf version of these presentations accompany the recorded webinar with closed captions to be posted on the WMOST web page. The webinar was recorded at the time a training workshop took place for EPA's Watershed Management Optimization Support Tool (WMOST, v2).

The use of a basic safety investment model in a practical risk management context

International Nuclear Information System (INIS)

Aven, Terje; Hiriart, Yolande

2011-01-01

We consider a basic model in economic safety analysis: a firm is willing to invest an amount x in safety measures to avoid an accident A, which in the case of occurrence, leads to a loss of size L. The probability of an accident is a function of x. The optimal value of x is determined by minimizing the expected costs. In the paper, we re-examine this model by adopting a practical risk/safety management perspective. We question how this model can be used for guiding the firm and regulators in determining the proper level of investment in safety. Attention is given to issues like how to determine the probability of an accident and how to take into account uncertainties that extend beyond the expected value. It is concluded that the model, with suitable extensions and if properly implemented, provides a valuable decision support tool. By focusing on investment levels and stimulating thereby the generation of alternative risk-reducing measures, the model is considered particularly useful in risk reduction (ALARP) processes. - Highlights: → It is shown how to use a basic investment model in a practical risk management setting. → The model may be a valuable decision support tool if properly implemented. → It guides decision makers on risk reduction and how to determine what is ALARP. → The model stimulates the generation of alternative risk-reducing measures.

Defining safety culture and the nexus between safety goals and safety culture. 1. An Investigation Study on Practical Points of Safety Management

International Nuclear Information System (INIS)

Hasegawa, Naoko; Takano, Kenichi; Hirose, Ayako

2001-01-01

In a report after the Chernobyl accident, the International Atomic Energy Agency indicated the definition and the importance of safety culture and the ideal organizational state where safety culture pervades. However, the report did not mention practical approaches to enhance safety culture. In Japan, although there had been investigations that clarified the consciousness of employees and the organizational climate in the nuclear power and railway industries, organizational factors that clarified the level of organization safety and practical methods that spread safety culture in an organization had not been studied. The Central Research Institute of the Electric Power Industry conducted surveys of organizational culture for the construction, chemical, and manufacturing industries. The aim of our study was to clarify the organizational factors that influence safety in an organization expressed in employee safety consciousness, commitment to safety activities, rate of accidents, etc. If these areas were clarified, the level of organization safety might be evaluated, and practical ways could be suggested to enhance the safety culture. Consequently, a series of investigations was conducted to clarify relationships among organizational climate, employee consciousness, safety management and activities, and rate of accidents. The questionnaire surveys were conducted in 1998-1999. The subjects were (a) managers of the safety management sections in the head offices of the construction, chemical, and manufacturing industries; (b) responsible persons in factories of the chemical and manufacturing industries; and (c) general workers in factories of the chemical and manufacturing industries. The number of collected data was (a) managers in the head office: 48 from the construction industry and 58 from the chemical and manufacturing industries, (b) responsible persons in factories: 567, and (c) general workers: from 29 factories. Items in the questionnaires were selected from

Integrated therapy safety management system.

Science.gov (United States)

Podtschaske, Beatrice; Fuchs, Daniela; Friesdorf, Wolfgang

2013-09-01

The aim is to demonstrate the benefit of the medico-ergonomic approach for the redesign of clinical work systems. Based on the six layer model, a concept for an 'integrated therapy safety management' is drafted. This concept could serve as a basis to improve resilience. The concept is developed through a concept-based approach. The state of the art of safety and complexity research in human factors and ergonomics forms the basis. The findings are synthesized to a concept for 'integrated therapy safety management'. The concept is applied by way of example for the 'medication process' to demonstrate its practical implementation. The 'integrated therapy safety management' is drafted in accordance with the six layer model. This model supports a detailed description of specific work tasks, the corresponding responsibilities and related workflows at different layers by using the concept of 'bridge managers'. 'Bridge managers' anticipate potential errors and monitor the controlled system continuously. If disruptions or disturbances occur, they respond with corrective actions which ensure that no harm results and they initiate preventive measures for future procedures. The concept demonstrates that in a complex work system, the human factor is the key element and final authority to cope with the residual complexity. The expertise of the 'bridge managers' and the recursive hierarchical structure results in highly adaptive clinical work systems and increases their resilience. The medico-ergonomic approach is a highly promising way of coping with two complexities. It offers a systematic framework for comprehensive analyses of clinical work systems and promotes interdisciplinary collaboration. © 2013 The Authors. British Journal of Clinical Pharmacology © 2013 The British Pharmacological Society.

General principles of nuclear safety management related to research reactor decommissioning

International Nuclear Information System (INIS)

Banciu, Ortenzia; Vladescu, Gabriela

2003-01-01

The paper contents the general principles applicable to the decommissioning of research reactors to ensure a proper nuclear safety management, during both decommissioning activities and post decommissioning period. The main objective of decommissioning is to ensure the protection of workers, population and environment against all radiological and non-radiological hazards that could result after a reactor shutdown and dismantling. In the same time, it is necessary, by some proper provisions, to limit the effect of decommissioning for the future generation, according to the new Romanian, IAEA and EU Norms and Regulations. Assurance of nuclear safety during decommissioning process involves, in the first step, to establish of some safety principles and requirements to be taken into account during whole process. In the same time, it is necessary to perform a series of analyses to ensure that the whole process is conducted in a planned and safe manner. The general principles proposed for a proper management of safety during research reactor decommissioning are as follows: - Set-up of all operations included in a Decommissioning Plan; - Set-up and qualitative evaluation of safety problems, which could appear during normal decommissioning process, both radiological and nonradiological risks for workers and public; - Set-up of accident list related to decommissioning process the events that could appear both due to some abnormal working conditions and to some on-site and off-site events like fires, explosions, flooding, earthquake, etc.); - Development and qualitative/ quantitative evaluation of scenarios for each incidents; - Development (and evaluation) of safety indicator system. The safety indicators are the most important tools used to assess the level of nuclear safety during decommissioning process, to discover the weak points and to establish safety measures. The paper contains also, a safety case evaluation (description of facility according to the decommissioning

Safety assessment methodologies for near surface disposal facilities. Results of a co-ordinated research project (ISAM). Volume 1: Review and enhancement of safety assessment approaches and tools. Volume 2: Test cases

International Nuclear Information System (INIS)

2004-07-01

For several decades, countries have made use of near surface facilities for the disposal of low and intermediate level radioactive waste. In line with the internationally agreed principles of radioactive waste management, the safety of these facilities needs to be ensured during all stages of their lifetimes, including the post-closure period. By the mid 1990s, formal methodologies for evaluating the long term safety of such facilities had been developed, but intercomparison of these methodologies had revealed a number of discrepancies between them. Consequently, in 1997, the International Atomic Energy Agency launched a Co-ordinated Research Project (CRP) on Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities (ISAM). The particular objectives of the CRP were to provide a critical evaluation of the approaches and tools used in post-closure safety assessment for proposed and existing near-surface radioactive waste disposal facilities, enhance the approaches and tools used and build confidence in the approaches and tools used. The CRP ran until 2000 and resulted in the development of a harmonized assessment methodology (the ISAM project methodology), which was applied to a number of test cases. Over seventy participants from twenty-two Member States played an active role in the project and it attracted interest from around seven hundred persons involved with safety assessment in seventy-two Member States. The results of the CRP have contributed to the Action Plan on the Safety of Radioactive Waste Management which was approved by the Board of Governors and endorsed by the General Conference in September 2001. Specifically, they contribute to Action 5, which requests the IAEA Secretariat to 'develop a structured and systematic programme to ensure adequate application of the Agency's waste safety standards', by elaborating on the Safety Requirements on 'Near Surface Disposal of Radioactive Waste' (Safety Standards Series No. WS-R-1) and

The ConCom Safety Management Scale: developing and testing a measurement instrument for control-based and commitment-based safety management approaches in hospitals.

Science.gov (United States)

Alingh, Carien W; Strating, Mathilde M H; van Wijngaarden, Jeroen D H; Paauwe, Jaap; Huijsman, Robbert

2018-03-06

Nursing management is considered important for patient safety. Prior research has predominantly focused on charismatic leadership styles, although it is questionable whether these best characterise the role of nurse managers. Managerial control is also relevant. Therefore, we aimed to develop and test a measurement instrument for control-based and commitment-based safety management of nurse managers in clinical hospital departments. A cross-sectional survey design was used to test the newly developed questionnaire in a sample of 2378 nurses working in clinical departments. The nurses were asked about their perceptions of the leadership behaviour and management practices of their direct supervisors. Psychometric properties were evaluated using confirmatory factor analysis and reliability estimates. The final 33-item questionnaire showed acceptable goodness-of-fit indices and internal consistency (Cronbach's α of the subscales range: 0.59-0.90). The factor structure revealed three subdimensions for control-based safety management: (1) stressing the importance of safety rules and regulations; (2) monitoring compliance; and (3) providing employees with feedback. Commitment-based management consisted of four subdimensions: (1) showing role modelling behaviour; (2) creating safety awareness; (3) showing safety commitment; and (4) encouraging participation. Construct validity of the scale was supported by high factor loadings and provided preliminary evidence that control-based and commitment-based safety management are two distinct yet related constructs. The findings were reconfirmed in a cross-validation procedure. The results provide initial support for the construct validity and reliability of our ConCom Safety Management Scale. Both management approaches were found to be relevant for managing patient safety in clinical hospital departments. The scale can be used to deepen our understanding of the influence of patient safety management on healthcare professionals

Integrated environment, safety, and health management system description

International Nuclear Information System (INIS)

Zoghbi, J. G.

2000-01-01

The Integrated Environment, Safety, and Health Management System Description that is presented in this document describes the approach and management systems used to address integrated safety management within the Richland Environmental Restoration Project

On safety management and nuclear safety - A frame of reference for studies of safety management with examples from non-nuclear contects of relevance for nuclear safety

International Nuclear Information System (INIS)

Svenson, O.; Allwin, P.; Salo, I.

2004-03-01

The report includes three case studies of safety management. The studies are presented as chapters, but are written in a format that makes them easy to read separately. Two of the studies cover regulators (the Swedish Civil Aviation Safety Authority, Luftfartsinspektionen) and the Norwegian Petroleum Directorate) and one a regulated activity/industry (a car manufacturer, Volvo Car). The introduction outlines a living system framework and relates this to concepts used in organizational management. The report concludes with some findings with potential relevance for safety management in the nuclear power domain. In the next phase of the work, the regulated counterparts of the regulators here will be investigated in addition to a fourth case study of a regulated activity/industry. (au)

Bridging probabilistic safety assessment studies with information Management System

International Nuclear Information System (INIS)

Luanco, E. M.

2010-01-01

Probabilistic Safety Assessment (PSA) is a critical business often known in conjunction with either new build or life extension of nuclear power plant. However, it is not so often referred to the operation phase of the plant, although it could bring a lot of long term benefits to the operator. The purpose of this paper is to discuss the potential contribution of PSA with day to day operation in bridging the deficiencies and specific failures characteristics of critical Structure System and Component (SSC) with the results of PSA studies. From and Information System prospective, the use of Information Management system (IMS) -also known as EAM solution -widely used by the majority of nuclear operators- is the potential vehicle to bridge the 2 worlds of PSA and daily operation. Most EAM solution get reliability management functionalities which are not really integrated with PSA tools and data and thus cannot provide the anticipated benefits of addressing typical aging phenomena beyond the only predictive models used by the PSA studies. The paper will also discuss potential integration scenario between PSA tools and EAM solutions. (authors)

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

Science.gov (United States)

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

EUMENES, a computer software for managing the radiation safety program information at an institutional level

International Nuclear Information System (INIS)

Hernandez Saiz, Alejandro; Cornejo Diaz, Nestor; Valdes Ramos, Maryzury; Martinez Gonzalez, Alina; Gonzalez Rodriguez, Niurka; Vergara Gil, Alex

2008-01-01

The correct application of national and international regulations in the field of Radiological Safety requires the implementation of Radiation Safety Programs appropriate to the developed practice. These Programs demand the preparation and keeping of an important number of records and data, the compliance with working schedules, systematic quality controls, audits, delivery of information to the Regulatory Authority, the execution of radiological assessments, etc. Therefore, it is unquestionable the necessity and importance of having a computer tool to support the management of the information related to the Radiation Safety Program in any institution. The present work describes a computer program that allows the efficient management of these data. Its design was based on the IAEA International Basic Safety Standards recommendations and on the requirements of the Cuban national standards, with the objective of being flexible enough to be applied in most of the institutions using ionizing radiations. The most important records of Radiation Safety Programs were incorporated and reports can be generated by the users. An additional tools-module allows the user to access to a radionuclide data library, and to carry out different calculations of interest in radiological protection. The program has been developed in Borland Delphi and manages Microsoft Access databases. It is a user friendly code that aims to support the optimization of Radiation Safety Programs. The program contributes to save resources and time, as the generated information is electronically kept and transmitted. The code has different security access levels according to the user responsibility at the institution and also provides for the analysis of the introduced data, in a quick and efficient way, as well as to notice deadlines, the exceeding of reference levels and situations that require attention. (author)

Management Tools in Engineering Education.

Science.gov (United States)

Fehr, M.

1999-01-01

Describes a teaching model that applies management tools such as delegation, total quality management, time management, teamwork, and Deming rules. Promotes the advantages of efficiency, reporting, independent scheduling, and quality. (SK)

DASAO: software tool for the management of safeguards, waste and decommissioning

International Nuclear Information System (INIS)

Noynaert, Luc; Verwaest, Isi; Libon, Henri; Cuchet, Jean-Marie

2013-01-01

Decommissioning of nuclear facilities is a complex process involving operations such as detailed surveys, decontamination and dismantling of equipment's, demolition of buildings and management of resulting waste and nuclear materials if any. This process takes place in a well-developed legal framework and is controlled and followed-up by stakeholders like the Safety Authority, the Radwaste management Agency and the Safeguards Organism. In the framework of its nuclear waste and decommissioning program and more specifically the decommissioning of the BR3 reactor, SCK-CEN has developed different software tools to secure the waste and material traceability, to support the sound management of the decommissioning project and to facilitate the control and the follow-up by the stakeholders. In the case of Belgium, it concerns the Federal Agency for Nuclear Control, the National Agency for radioactive waste management and fissile material and EURATOM and IAEA. In 2005, Belgonucleaire decided to shutdown her Dessel MOX fuel fabrication plant and the production stopped in 2006. According to the final decommissioning plan ('PDF') approved by NIRAS, the decommissioning works should start in 2008 at the earliest. In 2006, the management of Belgonucleaire identified the need for an integrated database and decided to entrust SCK-CEN with its development, because SCK-CEN relies on previous experience in comparable applications namely already approved by authorities such as NIRAS, FANC and EURATOM. The main objectives of this integrated software tool are: - simplified and updated safeguards; - waste and material traceability; - computerized documentation; - support to project management; - periodic and final reporting to waste and safety authorities. The software called DASAO (Database for Safeguards, Waste and Decommissioning) was successfully commissioned in 2008 and extensively used from 2009 to the satisfaction of Belgonucleaire and the stakeholders. SCK-CEN is

Chronic condition self-management support for Aboriginal people: Adapting tools and training.

Science.gov (United States)

Battersby, Malcolm; Lawn, Sharon; Kowanko, Inge; Bertossa, Sue; Trowbridge, Coral; Liddicoat, Raylene

2018-04-22

Chronic conditions are major health problems for Australian Aboriginal people. Self-management programs can improve health outcomes. However, few health workers are skilled in self-management support and existing programs are not always appropriate in Australian Aboriginal contexts. The goal was to increase the capacity of the Australian health workforce to support Australian Aboriginal people to self-manage their chronic conditions by adapting the Flinders Program of chronic condition self-management support for Australian Aboriginal clients and develop and deliver training for health professionals to implement the program. Feedback from health professionals highlighted that the Flinders Program assessment and care planning tools needed to be adapted to suit Australian Aboriginal contexts. Through consultation with Australian Aboriginal Elders and other experts, the tools were condensed into an illustrated booklet called 'My Health Story'. Associated training courses and resources focusing on cultural safety and effective engagement were developed. A total of 825 health professionals  across Australia was trained and 61 people qualified as accredited trainers in the program, ensuring sustainability. The capacity and skills of the Australian health workforce to engage with and support Australian Aboriginal people to self-manage their chronic health problems significantly increased as a result of this project. The adapted tools and training were popular and appreciated by the health care organisations, health professionals and clients involved. The adapted tools have widespread appeal for cultures that do not have Western models of health care and where there are health literacy challenges. My Health Story has already been used internationally. © 2018 National Rural Health Alliance Ltd.

A total safety management model

International Nuclear Information System (INIS)

Obadia, I.J.; Vidal, M.C.R.; Melo, P.F.F.F.

2002-01-01

In nuclear organizations, quality and safety are inextricably linked. Therefore, the search for excellence means reaching excellence in nuclear safety. The International Atomic Energy Agency, IAEA, developed, after the Chernobyl accident, the organizational approach for improving nuclear safety based on the safety culture, which requires a framework necessary to provide modifications in personnel attitudes and behaviors in situations related to safety. This work presents a Total Safety Management Model, based on the Model of Excellence of the Brazilian Quality Award and on the safety culture approach, which represents an alternative to this framework. The Model is currently under validation at the Nuclear Engineering Institute, in Rio de Janeiro, Brazil, and the results of its initial safety culture self assessment are also presented and discussed. (author)

[Safety Walkround as a risk assessment tool: the first Italian experience].

Science.gov (United States)

Levati, A; Amato, S; Adrario, E; De Flaviis, C; Delia, C; Milesi, S; Petrini, F; Bevilacqua, L

2009-01-01

In 2007 the Study Group "Clinical Risk Management" of the Italian Society of Anaesthesia and Intensive Care Unit (SIAARTI) performed a multicentric study in Intensive Care Unit (ICU) to assess the feasibility and efficacy of the Safety WalkRound (SWR) as a tool for the risk assessment. As the environment and organization of ICU are more complex than anaesthesia ones, mainly due to the severity of patients, high number of involved healthcare givers and different kinds of procedures, the Study Group decided that a check list is not fit for ICU and , after a careful review of the literature, chose to test the Safety WalkRound. in four Italian General ICUs. The SWR was born in 2003 when Frankel plans a structured interview of 15 questions (about 50% open) to collect operators' opinion about rate and type of errors, near misses, communication, problems regarding the report of adverse events and suggestions to increase patient safety. Consequently SWR is a tool of risk assessment alternative to the Incident Reporting which is marked by a diffuse underreporting of operators. Although the SWR is a new tool not validated in Italian language neither published in Italy on PubMed journals , the Study Group has decided that it might be fit for the organization of Italian Healthcare System. A back translation of the validated model of Joint Commission was provided and the translated version has been lightly changed to be employed in hospitals with and without Incident Reporting . The questions have been changed or introduced on the basis of the organization vulnerabilities detected with observational techniques or Focus Group. The interview performed in Italy contains 16 questions classified into five groups: a) error, b) error prevention, c) communication, teamwork and leadership, d) error discussion and e) relationship with patients and their families. The answers collected have been analyzed to detect the vulnerabilities in the organizations and specify the improvements to

Perceived safety management practices in the logistics sector.

Science.gov (United States)

Auyong, Hui-Nee; Zailani, Suhaiza; Surienty, Lilis

2016-03-09

Malaysia's progress on logistics has been slowed to keep pace with its growth in trade. The Government has been pressing companies to improve the safety of their activities in order to reduce society's loss due to occupational accidents and illnesses. Occupational safety and health is a crucial part of a workplace because every worker has to take care of his/her own safety and health. The main occupational safety and health (OSH) national policy in Malaysia is the enactment of the Occupational Safety and Health Act (OSHA) 1994. Only those companies which have excellent health and safety care have good quality and productive employees. This study investigated safety management practices in the logistics sector. The present study is concerned with the human factors to safety in the logistics industry. The authors examined the perceived safety management practices of workers in the logistics sector. The purpose was to identify the perception of safety management practices of Malaysian logistics personnel. Survey questionnaires were distributed to assess logistics personnel about management commitment. The quantitative method using the availability sampling method was applied. The data gathered from the survey were analysed using SPSS software. The responses to the survey were rated according to the Likert scale type, with '1' indicating strongly disagree and '5' indicating strongly agree. One hundred and three employees of logistics functions completed the survey. The highest mean scores were found for fire apparatus, prioritisation of safety, and safety policy. The results from this study also emphasise the importance of the management's commitment in enhancing workplace safety. Specifically, companies should maintain good relations between the employer and the employee to help reduce workplace injuries.

The role of PSA in safety management

International Nuclear Information System (INIS)

Szikszai, T.

1997-01-01

The presentation discusses the following issues: defence in depth principle (the role of the barriers, how does PSA represents the barriers?); the safety management and nuclear power plants; the probabilistic and deterministic approaches; the PSA applications and safety management

Setting clear expectations for safety basis development

International Nuclear Information System (INIS)

MORENO, M.R.

2003-01-01

DOE-RL has set clear expectations for a cost-effective approach for achieving compliance with the Nuclear Safety Management requirements (10 CFR 830, Nuclear Safety Rule) which will ensure long-term benefit to Hanford. To facilitate implementation of these expectations, tools were developed to streamline and standardize safety analysis and safety document development resulting in a shorter and more predictable DOE approval cycle. A Hanford Safety Analysis and Risk Assessment Handbook (SARAH) was issued to standardized methodologies for development of safety analyses. A Microsoft Excel spreadsheet (RADIDOSE) was issued for the evaluation of radiological consequences for accident scenarios often postulated for Hanford. A standard Site Documented Safety Analysis (DSA) detailing the safety management programs was issued for use as a means of compliance with a majority of 3009 Standard chapters. An in-process review was developed between DOE and the Contractor to facilitate DOE approval and provide early course correction. As a result of setting expectations and providing safety analysis tools, the four Hanford Site waste management nuclear facilities were able to integrate into one Master Waste Management Documented Safety Analysis (WM-DSA)

Knowledge Management Implementation and the Tools Utilized in Healthcare for Evidence-Based Decision Making: A Systematic Review.

Science.gov (United States)

Shahmoradi, Leila; Safadari, Reza; Jimma, Worku

2017-09-01

Healthcare is a knowledge driven process and thus knowledge management and the tools to manage knowledge in healthcare sector are gaining attention. The aim of this systematic review is to investigate knowledge management implementation and knowledge management tools used in healthcare for informed decision making. Three databases, two journals websites and Google Scholar were used as sources for the review. The key terms used to search relevant articles include: "Healthcare and Knowledge Management"; "Knowledge Management Tools in Healthcare" and "Community of Practices in healthcare". It was found that utilization of knowledge management in healthcare is encouraging. There exist numbers of opportunities for knowledge management implementation, though there are some barriers as well. Some of the opportunities that can transform healthcare are advances in health information and communication technology, clinical decision support systems, electronic health record systems, communities of practice and advanced care planning. Providing the right knowledge at the right time, i.e., at the point of decision making by implementing knowledge management in healthcare is paramount. To do so, it is very important to use appropriate tools for knowledge management and user-friendly system because it can significantly improve the quality and safety of care provided for patients both at hospital and home settings.

MOSEG code for safety oriented maintenance management Safety of management of maintenance oriented by MOSEG code

International Nuclear Information System (INIS)

Torres Valle, Antonio

2005-01-01

Full text: One of the main reasons that makes maintenance contribute highly when facing safety problems and facilities availability is the lack of maintenance management systems to solve these fields in a balanced way. Their main setbacks are shown in this paper. It briefly describes the development of an integrating algorithm for a safety and availability-oriented maintenance management by virtue of the MOSEG Win 1.0 code. (author)

Nuclear safety culture and integrated risk management

International Nuclear Information System (INIS)

Joksimovich, V.; Orvis, D.D.

1993-01-01

A primary focus of nuclear safety is the prevention of large releases of radioactivity in the case of low-probability severe accidents. An analysis of the anatomy of nuclear (Chernobyl, Three Mile Island Unit 2) and nonnuclear (Challenger, Bhopal, Piper Alpha, etc.) severe accidents yields four broad categories of root causes: human (operating crew response), machine (design with its basic flaws), media (natural phenomena, operational considerations, political environment, commercial pressures, etc.)-providing triggering events, and management (basic organizational safety culture flaws). A strong management can minimize the contributions of humans, machines, and media to the risk arising from the operation of hazardous facilities. One way that management can have a powerful positive influence is through the establishment of a proper safety culture. The term safety culture is used as defined by the International Atomic Energy Agency's International Safety Advisory Group

Safety in home care: A research protocol for studying medication management

Directory of Open Access Journals (Sweden)

Easty Anthony

2010-06-01

Full Text Available Abstract Background Patient safety is an ongoing global priority, with medication safety considered a prevalent, high-risk area of concern. Yet, we have little understanding of the supports and barriers to safe medication management in the Canadian home care environment. There is a clear need to engage the providers and recipients of care in studying and improving medication safety with collaborative approaches to exploring the nature and safety of medication management in home care. Methods A socio-ecological perspective on health and health systems drives our iterative qualitative study on medication safety with elderly home care clients, family members and other informal caregivers, and home care providers. As we purposively sample across four Canadian provinces: Alberta (AB, Ontario (ON, Quebec (QC and Nova Scotia (NS, we will collect textual and visual data through home-based interviews, participant-led photo walkabouts of the home, and photo elicitation sessions at clients' kitchen tables. Using successive rounds of interpretive description and human factors engineering analyses, we will generate robust descriptions of managing medication at home within each provincial sample and across the four-province group. We will validate our initial interpretations through photo elicitation focus groups with home care providers in each province to develop a refined description of the phenomenon that can inform future decision-making, quality improvement efforts, and research. Discussion The application of interpretive and human factors lenses to the visual and textual data is expected to yield findings that advance our understanding of the issues, challenges, and risk-mitigating strategies related to medication safety in home care. The images are powerful knowledge translation tools for sharing what we learn with participants, decision makers, other healthcare audiences, and the public. In addition, participants engage in knowledge exchange

Effect of national cultural values on safety climate, and safety management system

International Nuclear Information System (INIS)

Ali, T.H.; Memon, N.A.

2008-01-01

This paper investigates the critical role played by the national culture in influencing how workers safely or otherwise behave (mainly in risky situations) on construction sites, and how site managers implement safety management processes and practices. The paper presents the findings of an empirical research study based on a questionnaire survey, administered in Pakistan, targeting construction site managers and workers to gauge the effect national culture has on managers preferences for and perceptions of safety management systems (policies and practices) and than linking this effect to predict workers attitudes and intentional behaviors. (author)

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

Science.gov (United States)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

A Safety Management Model for FAR 141 Approved Flight Schools

OpenAIRE

Mendonca, Flavio A. C.; Carney, Thomas Q

2017-01-01

The Safety Management Annex (Annex 19), which became applicable in November 2013, consolidates safety management provisions previously contained in six other International Civil Aviation Organization (ICAO) Annexes, and will serve as a resource for overarching state safety management responsibilities. Through Annex 19, ICAO has required that its member states develop and implement safety management systems (SMS) to improve safety. This mandate includes an approved training organization that i...

A management system integrating radiation protection and safety supporting safety culture in the hospital

International Nuclear Information System (INIS)

Almen, A.; Lundh, C.

2015-01-01

Quality assurance has been identified as an important part of radiation protection and safety for a considerable time period. A rational expansion and improvement of quality assurance is to integrate radiation protection and safety in a management system. The aim of this study was to explore factors influencing the implementing strategy when introducing a management system including radiation protection and safety in hospitals and to outline benefits of such a system. The main experience from developing a management system is that it is possible to create a vast number of common policies and routines for the whole hospital, resulting in a cost-efficient system. One of the key benefits is the involvement of management at all levels, including the hospital director. Furthermore, a transparent system will involve staff throughout the organisation as well. A management system supports a common view on what should be done, who should do it and how the activities are reviewed. An integrated management system for radiation protection and safety includes key elements supporting a safety culture. (authors)

Safety standards of IAEA for management systems

International Nuclear Information System (INIS)

Vincze, P.

2005-01-01

IAEA has developed a new series of safety standards which are assigned for constitution of the conditions and which give the instruction for setting up the management systems that integrate the aims of safety, health, life environment and quality. The new standard shall replace IAEA 50-C-Q - Requirements for security of the quality for safety in nuclear power plants and other nuclear facilities as well as 14 related safety instructions mentioned in the Safety series No. 50-C/SG-Q (1996). When developing of this complex, integrated set of requirements for management systems, the IAEA requirements 50-C-Q (1996) were taken into consideration as well as the publications developed within the International organisation for standardization (ISO) ISO 9001:2000 and ISO14001: 1996. The experience of European Union member states during the development, implementation and improvement of the management systems were also taken into consideration

A systems engineering approach to implementation of safety management systems in the Norwegian fishing fleet

International Nuclear Information System (INIS)

McGuinness, Edgar; Utne, Ingrid B.

2014-01-01

The fishing industry is plagued by a long history of fatality and injury occurrence. Commercial fishing is hence recognized as the most dangerous and difficult of professional callings, in all jurisdictions. Fishing vessels have their own unique set of hazards, a myriad collection of complex occupational accident potentials, barely controlled, co-existing in a perilous work environment. The work in this article is directed by the Norwegian Systematic Health, Environmental and Safety Activities in Enterprises (1997) (Internal Control Regulations [1]), the ISM Code [2] for vessels and their recent applicability to the fishing fleet of Norway. Both safety management works place requirements on the vessel operators and crew to actively manage safety as an on-going concern. The application of these safety management system (SMS) control documents to fishing vessels is just the latest instalment in a continual drive to improve safety in this sector. The difficulty is that there has been no previous systematic approach to safety within the fishing fleet. This article uses the tenants of systems engineering to determine the requirements for such a SMS, detailing the limiting factors and restrictive issues of this complex operating environment. - Highlights: • Systems engineer is applied as a tool for determining requirements for design and construction of a safety management system (SMS). • Outlining a simplistic format, identifying, designingand facilitating improvement opportunities in the conduction and application of SMS’s on fishing vessels. • Knowledge provision is a key requirement of management systems, through provision of understanding, detail orientation and applicable skills for realization. • Outlining, what is to be done and how it is to be completed to accomplish compliance with pertinent legislative requirements. • Promoting a combination of documentation and communication arrangements by which the actionsnecessary for management can be

Software Tools Streamline Project Management

Science.gov (United States)

2009-01-01

Three innovative software inventions from Ames Research Center (NETMARK, Program Management Tool, and Query-Based Document Management) are finding their way into NASA missions as well as industry applications. The first, NETMARK, is a program that enables integrated searching of data stored in a variety of databases and documents, meaning that users no longer have to look in several places for related information. NETMARK allows users to search and query information across all of these sources in one step. This cross-cutting capability in information analysis has exponentially reduced the amount of time needed to mine data from days or weeks to mere seconds. NETMARK has been used widely throughout NASA, enabling this automatic integration of information across many documents and databases. NASA projects that use NETMARK include the internal reporting system and project performance dashboard, Erasmus, NASA s enterprise management tool, which enhances organizational collaboration and information sharing through document routing and review; the Integrated Financial Management Program; International Space Station Knowledge Management; Mishap and Anomaly Information Reporting System; and management of the Mars Exploration Rovers. Approximately $1 billion worth of NASA s projects are currently managed using Program Management Tool (PMT), which is based on NETMARK. PMT is a comprehensive, Web-enabled application tool used to assist program and project managers within NASA enterprises in monitoring, disseminating, and tracking the progress of program and project milestones and other relevant resources. The PMT consists of an integrated knowledge repository built upon advanced enterprise-wide database integration techniques and the latest Web-enabled technologies. The current system is in a pilot operational mode allowing users to automatically manage, track, define, update, and view customizable milestone objectives and goals. The third software invention, Query

National report of the Slovak Republic compiled in terms of the Join on the safety of spent fuel management and on the safety of radwaste management

International Nuclear Information System (INIS)

Jurina, V.; Viktory, D.; Petrik, T.; Sovcik, J.; Suess, J.; Tomek, J.; Lukacovic, J.; Ivan, J.; Ziakova, M.; Metke, E.; Pospisil, M.; Turner, M.; Homola, J.; Vaclav, J.; Bystricka, S.; Barbaric, M.; Horvath, J.; Betak, J.; Mihaly, B.; Adamovsky, V.; Baloghova, A.; Orihel, M.; Vasina, D.; Balaz, J.; Misovicova, D.; Vrtoch, M.; Mlcuch, J.; Granak, P.; Meleg, J.; Bardy, M.; Gogoliak, J.

2011-08-01

The National safety report of the Slovak Republic on the safety of spent fuel management and on the safety of radwaste management in 2011 is presented. These activities in the safety of spent fuel management and radioactive waste management in the Slovak Republic are reported under the headings: (A) Introduction; B) Concept for spent nuclear fuel management (SNF) and radwaste management (RAW); (C) Scope of application of the convention; (D) Spent fuel management and radioactive waste (RAW) management facilities; (E) Legislation and regulation; (F) General safety provisions; (G) Safety of spent fuel management; (H) Safety of radioactive waste (RAW) management; (I) Transboundary movement of spent nuclear fuel and radioactive waste; (J) Disused sealed sources; (K) Planned measures to improve safety; (L) Communication with the public; (M) Annexes. Annexes consists of following parts: I. List of nuclear facilities for spent fuel and RAW management. II. Limits of radioactive material discharges into atmosphere and hydrosphere. III. List of nuclear installations in decommissioning. IV. Inventory of stored spent nuclear fuel. V. Inventory of stored RAW. VI. List of national laws, decrees and guidelines. VII. List of international expert reports (including safety reports). VIII. List of authors.

Using Cognitive Work Analysis to fit decision support tools to nurse managers' work flow.

Science.gov (United States)

Effken, Judith A; Brewer, Barbara B; Logue, Melanie D; Gephart, Sheila M; Verran, Joyce A

2011-10-01

To better understand the environmental constraints on nurse managers that impact their need for and use of decision support tools, we conducted a Cognitive Work Analysis (CWA). A complete CWA includes system analyses at five levels: work domain, decision-making procedures, decision-making strategies, social organization/collaboration, and worker skill level. Here we describe the results of the Work Domain Analysis (WDA) portion in detail then integrate the WDA with other portions of the CWA, reported previously, to generate a more complete picture of the nurse manager's work domain. Data for the WDA were obtained from semi-structured interviews with nurse managers, division directors, CNOs, and other managers (n = 20) on 10 patient care units in three Arizona hospitals. The WDA described the nurse manager's environment in terms of the constraints it imposes on the nurse manager's ability to achieve targeted outcomes through organizational goals and priorities, functions, processes, as well as work objects and resources (e.g., people, equipment, technology, and data). Constraints were identified and summarized through qualitative thematic analysis. The results highlight the competing priorities, and external and internal constraints that today's nurse managers must satisfy as they try to improve quality and safety outcomes on their units. Nurse managers receive a great deal of data, much in electronic format. Although dashboards were perceived as helpful because they integrated some data elements, no decision support tools were available to help nurse managers with planning or answering "what if" questions. The results suggest both the need for additional decision support to manage the growing complexity of the environment, and the constraints the environment places on the design of that technology if it is to be effective. Limitations of the study include the small homogeneous sample and the reliance on interview data targeting safety and quality. Copyright © 2011

Taking ownership of safety. What are the active ingredients of safety coaching and how do they impact safety outcomes in critical offshore working environments?

Science.gov (United States)

Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan

2015-01-01

Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.

Dairy farmer use of price risk management tools.

Science.gov (United States)

Wolf, C A

2012-07-01

Volatility in milk and feed prices can adversely affect dairy farm profitability. Many risk management tools are available for use by US dairy farmers. This research uses surveys of Michigan dairy farmers to examine the extent to which price risk management tools have been used, the farm and operator characteristics that explain the use of these tools, and reasons farmers have not used these tools. A 1999 survey was used to benchmark the degree to which dairy producers had used milk and feed price risk management instruments to compare with 2011 use rates. The surveys collected information about the farm characteristics such as herd size, farmland operated, business organization, and solvency position. Farm operator characteristics collected include age, education, and experience. Dairy farmer use of both milk and feed price risk management tools increased between 1999 and 2011. In 2011, herd size was positively related to the use of milk price risk management tools, whereas farms organized as a sole proprietorship were less likely to use them. Also in 2011, herd size and land operated were positively related to feed price risk management tools, whereas operator age was negatively related. Reasons why farmers had not used price risk management tools included basis risk, cost, lack of management time, cooperative membership, and lack of understanding. Conclusions include the need for educational programming on price risk management tools and a broader exploration of dairy farm risk management programs. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Improving safety in small enterprises through an integrated safety management intervention.

Science.gov (United States)

Kines, Pete; Andersen, Dorte; Andersen, Lars Peter; Nielsen, Kent; Pedersen, Louise

2013-02-01

This study tests the applicability of a participatory behavior-based injury prevention approach integrated with safety culture initiatives. Sixteen small metal industry enterprises (10-19 employees) are randomly assigned to receive the intervention or not. Safety coaching of owners/managers result in the identification of 48 safety tasks, 85% of which are solved at follow-up. Owner/manager led constructive dialogue meetings with workers result in the prioritization of 29 tasks, 79% of which are accomplished at follow-up. Intervention enterprises have significant increases on six of eight safety-perception-survey factors, while comparisons increase on only one factor. Both intervention and comparison enterprises demonstrate significant increases in their safety observation scores. Interview data validate and supplement these results, providing some evidence for behavior change and the initiation of safety culture change. Given that over 95% of enterprises in most countries have less than 20 employees, there is great potential for adapting this integrated approach to other industries. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Safety behavior: Job demands, job resources, and perceived management commitment to safety.

Science.gov (United States)

Hansez, Isabelle; Chmiel, Nik

2010-07-01

The job demands-resources model posits that job demands and resources influence outcomes through job strain and work engagement processes. We test whether the model can be extended to effort-related "routine" safety violations and "situational" safety violations provoked by the organization. In addition we test more directly the involvement of job strain than previous studies which have used burnout measures. Structural equation modeling provided, for the first time, evidence of predicted relationships between job strain and "routine" violations and work engagement with "routine" and "situational" violations, thereby supporting the extension of the job demands-resources model to safety behaviors. In addition our results showed that a key safety-specific construct 'perceived management commitment to safety' added to the explanatory power of the job demands-resources model. A predicted path from job resources to perceived management commitment to safety was highly significant, supporting the view that job resources can influence safety behavior through both general motivational involvement in work (work engagement) and through safety-specific processes.

Achievements and Perspectives of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

International Nuclear Information System (INIS)

Louvat, D.; Lacoste, A.C.

2006-01-01

The Joint Convention on the Safety of Spent Fuel management and on the Safety of Radioactive Waste Management is the first legal instrument to directly address the safety of spent fuel and radioactive waste management on a global scale. The Joint Convention entered into force in 2001. This paper describes its process and its main achievements to date. The perspectives to establish of a Global Waste Safety Regime based on the Joint Convention are also discussed. (authors)

Strategies to Improve Management of Shoulder Dystocia Under the AHRQ Safety Program for Perinatal Care.

Science.gov (United States)

McArdle, Jill; Sorensen, Asta; Fowler, Christina I; Sommerness, Samantha; Burson, Katrina; Kahwati, Leila

2018-03-01

To assess implementation of safety strategies to improve management of births complicated by shoulder dystocia in labor and delivery units. Mixed-methods implementation evaluation. Labor and delivery units (N = 18) in 10 states participating in the Safety Program for Perinatal Care (SPPC). Shoulder dystocia is unpredictable, requiring rapid and coordinated action. Key informants were labor and delivery unit staff who implemented SPPC safety strategies. The SPPC was implemented by using the TeamSTEPPS teamwork and communication framework and tools, applying safety science principles (standardization, independent checks, and learn from defects) to shoulder dystocia management, and establishing an in situ simulation program focused on shoulder dystocia to practice teamwork and communication skills. Unit staff received training, a toolkit, technical assistance, and unit-specific feedback reports. Quantitative data on unit-reported process improvement measures and qualitative data from staff interviews were used to understand changes in use of safety principles, teamwork/communication, and in situ simulation. Use of shoulder dystocia safety strategies improved on the units. Differences between baseline and follow-up (10 months) were as follows: in situ simulation (50% vs. 89%), teamwork and communication (67% vs. 94%), standardization (67% to 94%), learning from defects (67% vs. 89%), and independent checks (56% vs. 78%). Interview data showed reasons to address management of shoulder dystocia, various approaches to implement safety practices, and facilitators and barriers to implementation. Successful management of shoulder dystocia requires a rapid, standardized, and coordinated response. The SPPC strategies to increase safety of shoulder dystocia management are scalable, replicable, and adaptable to unit needs and circumstances. Copyright © 2018 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights

Use of information technologies to contribute for optimizing the safety radiation management in Cuba; Uso de las tecnologias de la informacion, para contribuir a la optimizacion de la gestion de la seguridad radiologica en Cuba

Energy Technology Data Exchange (ETDEWEB)

Valdes Ramos, M.; Prendes Alonso, M.; Hernandez Saiz, A.; Manzano de Armas, J., E-mail: zury@cphr.edu.cu [Agencia de Energia Nuclear y Tecnologias de Avanzada (CPHR/AENTA), La Habana (Cuba). Centro de Proteccion e Higiene de las Radiaciones

2013-11-01

This paper presents the results achieved in Cuba, with the development of a group of information management tools to implement radiation safety systemic and proactive approaches to safety and ICT supported. These tools were designed for different organisms with responsibility for the security at the country level, to the regulatory authority, for user entities, for individual monitoring services and other radiation protection services. It describes the philosophy of information management model used, the characteristics of the developed tools and their integration, the work performed for the homogenization of information available and the ability to capture and deliver data at different levels in decision making. The tools developed are based on the use of variables and indicators of importance to the safety and the systemic approach adopted allows to facilitate the optimization process for supervision of safety practices as well as contribute to the management of knowledge in radiation safety, through a synergistic combination of process data, information, information management systems, and the creative and innovative radiation safety experts.

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries.

Science.gov (United States)

McGonagle, Alyssa K; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive.

Independent accident investigation: a modern safety tool

International Nuclear Information System (INIS)

Stoop, John A.

2004-01-01

Historically, safety has been subjected to a fragmented approach. In the past, every department has had its own responsibility towards safety, focusing either on working conditions, internal safety, external safety, rescue and emergency, public order or security. They each issued policy documents, which in their time were leading statements for elaboration and regulation. They also addressed safety issues with tools of various nature, often specifically developed within their domain. Due to a series of major accidents and disasters, the focus of attention is shifting from complying with quantitative risk standards towards intervention in primary operational processes, coping with systemic deficiencies and a more integrated assessment of safety in its societal context. In The Netherlands recognition of the importance of independent investigations has led to an expansion of this philosophy from the transport sector to other sectors. The philosophy now covers transport, industry, defense, natural disaster, environment and health and other major occurrences such as explosions, fires, and collapse of buildings or structures. In 2003 a multi-sector covering law will establish an independent safety board in The Netherlands. At a European level, mandatory investigation agencies are recognized as indispensable safety instruments for aviation, railways and the maritime sector, for which EU Directives are in place or being progressed [Transport accident and incident investigation in the European Union, European Transport Safety Council, ISBN 90-76024-10-3, Brussel, 2001]. Due to a series of major events, attention has been drawn to the consequences of disasters, highlighting the involvement of rescue and emergency services. They also have become subjected to investigative efforts, which in return, puts demands on investigation methodology. This paper comments on an evolutionary development in safety thinking and of safety boards, highlighting some consequences for strategic

Triangulating case-finding tools for patient safety surveillance: a cross-sectional case study of puncture/laceration.

Science.gov (United States)

Taylor, Jennifer A; Gerwin, Daniel; Morlock, Laura; Miller, Marlene R

2011-12-01

To evaluate the need for triangulating case-finding tools in patient safety surveillance. This study applied four case-finding tools to error-associated patient safety events to identify and characterise the spectrum of events captured by these tools, using puncture or laceration as an example for in-depth analysis. Retrospective hospital discharge data were collected for calendar year 2005 (n=48,418) from a large, urban medical centre in the USA. The study design was cross-sectional and used data linkage to identify the cases captured by each of four case-finding tools. Three case-finding tools (International Classification of Diseases external (E) and nature (N) of injury codes, Patient Safety Indicators (PSI)) were applied to the administrative discharge data to identify potential patient safety events. The fourth tool was Patient Safety Net, a web-based voluntary patient safety event reporting system. The degree of mutual exclusion among detection methods was substantial. For example, when linking puncture or laceration on unique identifiers, out of 447 potential events, 118 were identical between PSI and E-codes, 152 were identical between N-codes and E-codes and 188 were identical between PSI and N-codes. Only 100 events that were identified by PSI, E-codes and N-codes were identical. Triangulation of multiple tools through data linkage captures potential patient safety events most comprehensively. Existing detection tools target patient safety domains differently, and consequently capture different occurrences, necessitating the integration of data from a combination of tools to fully estimate the total burden.

Safety in waste management plants: An Indian perspective

International Nuclear Information System (INIS)

Shekhar, P.; Ozarde, P.D.; Gandhi, P.M.

2000-01-01

Assurance of safety of public and plant workers and protection of the environment are prime objectives in the design and construction of Waste Management Plants. In India, waste management principles and strategies have been evolved in accordance with national and international regulations and standards for radiation protection. The regulations governing radiation protection have a far-reaching impact on the management of the radioactive waste. The wastes arise at each stages of the fuel cycle with varying chemical nature, generation rate and specific activity levels depending upon the type of the facility. Segregation of waste based on its chemical nature and specific activity levels is an essential feature, as its aids in selection of treatment and conditioning process. Selection of the process, equipment and materials in the plant, are governed by safety consideration alongside factors like efficiency and simplicity. The plant design considerations like physical separation, general arrangement, ventilation zoning, access control, remote handling, process piping routing, decontamination etc. have major role in realizing waste safety. Stringent quality control measures during all stages of construction have helped in achieving the design intended safety. These aspects together with operating experience gained form basis for the improved safety features in the design and construction of waste management plants. The comprehensive safety is derived from adoption of waste management strategies and appropriate plant design considerations. The paper briefly brings safety in waste management programme in India, in its current perspective. (author)

Safety and Waste Management for SAM Pathogen Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Predisposal Management of Radioactive Waste. General Safety Requirements Pt. 5

International Nuclear Information System (INIS)

2010-01-01

There are a large number of facilities and activities around the world in which radioactive material is produced, handled and stored. This Safety Requirements publication presents international consensus requirements for the management of radioactive waste prior to its disposal. It provides the safety imperatives on the basis of which facilities can be designed, operated and regulated. The publication is supported by a number of Safety Guides that provide up to date recommendations and guidance on best practices for management of particular types of radioactive waste, for storage of radioactive waste, for assuring safety by developing safety cases and supporting safety assessments, and for applying appropriate management systems. Contents: 1. Introduction; 2. Protection of human health and the environment; 3. Responsibilities associated with the predisposal management of radioactive waste; 4. Steps in the predisposal management of radioactive waste; 5. Development and operation of predisposal radioactive waste management facilities and activities; Annex: Predisposal management of radioactive waste and the fundamental safety principles.

Predisposal Management of Radioactive Waste. General Safety Requirements Pt. 5

International Nuclear Information System (INIS)

2009-01-01

There are a large number of facilities and activities around the world in which radioactive material is produced, handled and stored. This Safety Requirements publication presents international consensus requirements for the management of radioactive waste prior to its disposal. It provides the safety imperatives on the basis of which facilities can be designed, operated and regulated. The publication is supported by a number of Safety Guides that provide up to date recommendations and guidance on best practices for management of particular types of radioactive waste, for storage of radioactive waste, for assuring safety by developing safety cases and supporting safety assessments, and for applying appropriate management systems. Contents: 1. Introduction; 2. Protection of human health and the environment; 3. Responsibilities associated with the predisposal management of radioactive waste; 4. Steps in the predisposal management of radioactive waste; 5. Development and operation of predisposal radioactive waste management facilities and activities; Annex: Predisposal management of radioactive waste and the fundamental safety principles.

Safety and Waste Management for SAM Chemistry Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Institutional failure: are safety management systems the answer?

Energy Technology Data Exchange (ETDEWEB)

Waddington, J.G.; Lafortune, J.F. [International Safety Research, Ottawa, Ontario (Canada); Duffey, R.B. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2009-07-01

In spite of an overwhelming number of safety management programs, incidents and accidents that could seemingly, in hindsight, have been prevented, still occur. Institutional failure is seen as a major contributor in almost all cases. With the anticipated significant increase in the number of nuclear plants around the world, a drastic step in the way we manage safety is deemed essential to further reduce the currently already very low rate of accidents to levels that will not cause undue public concern and threaten the success of the nuclear 'renaissance'. To achieve this, many industries have already started implementing a Safety Management System (SMS) approach, aimed at harmonizing, rationalizing and integrating management processes, safety culture and operational risk assessment. This paper discusses the origins and the nature of SMS based in part on the experience of the aviation industry, and shows how SMS is poised to be the next generation in the way the nuclear industry manages safety. It also discusses the need for better direct measures of risk to demonstrate the success of SMS implementation. (author)

Institutional failure: are safety management systems the answer?

International Nuclear Information System (INIS)

Waddington, J.G.; Lafortune, J.F.; Duffey, R.B.

2009-01-01

In spite of an overwhelming number of safety management programs, incidents and accidents that could seemingly, in hindsight, have been prevented, still occur. Institutional failure is seen as a major contributor in almost all cases. With the anticipated significant increase in the number of nuclear plants around the world, a drastic step in the way we manage safety is deemed essential to further reduce the currently already very low rate of accidents to levels that will not cause undue public concern and threaten the success of the nuclear 'renaissance'. To achieve this, many industries have already started implementing a Safety Management System (SMS) approach, aimed at harmonizing, rationalizing and integrating management processes, safety culture and operational risk assessment. This paper discusses the origins and the nature of SMS based in part on the experience of the aviation industry, and shows how SMS is poised to be the next generation in the way the nuclear industry manages safety. It also discusses the need for better direct measures of risk to demonstrate the success of SMS implementation. (author)

Joint convention on the safety of spent fuel management and on the safety of radioactive waste management

International Nuclear Information System (INIS)

1997-01-01

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management was adopted on 5 September 1997 by a Diplomatic Conference convened by the IAEA from 1 to 5 September 1997. The Joint Convention was opened for signature at Vienna on 29 September 1997 during the forty-first session of the General Conference of the IAEA. This document reproduces the text of the Convention

Joint convention on the safety of spent fuel management and on the safety of radioactive waste management

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-24

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management was adopted on 5 September 1997 by a Diplomatic Conference convened by the IAEA from 1 to 5 September 1997. The Joint Convention was opened for signature at Vienna on 29 September 1997 during the forty-first session of the General Conference of the IAEA. This document reproduces the text of the Convention.

Meeting the management challenges of the Decade of Action for Road Safety

Directory of Open Access Journals (Sweden)

Tony Bliss

2012-03-01

Full Text Available In low- and middle-income countries, the high price paid for mobility in terms of human loss and suffering is forecast to rise to unprecedented levels. More than 50 million deaths and 500 million serious injuries on the world's roads can be projected with some certainty over the first 50 years of the 21st century, unless sustained new initiatives are taken. This paper addresses the emergence of road safety as a development priority over the last decade and the management challenges facing the planned global response aimed at bringing road safety outcomes in developing countries under control. It outlines the decade of advocacy that created the UN Decade of Action for Road Safety 2011–2020 and related Global Plan, and highlights the concern that over the coming decade low and middle income countries will face considerable management challenges in successfully implementing related measures and sustaining their delivery. The paper discusses new road safety management tools that have been developed by the World Bank and ISO to provide assistance to countries and organizations within an integrated framework that ensures that measures taken are properly sequenced and adjusted to their absorptive and learning capacities. It concludes that strengthened institutions and the accelerated knowledge creation and transfer central to this, plus scaled-up investment and increased international cooperation and development aid are critical to the successful achievement of the Global Plan's ambitious goal.

Enhancing NPP Safety Through an Effective Dependability Management

Energy Technology Data Exchange (ETDEWEB)

Vieru, G., E-mail: g_vieru@yahoo.com [AREN, Bucharest (Romania)

2014-10-15

Taking into account the importance of the continuous improvement of the performance and reliability of a NPP and practical measures to strengthen nuclear safety and security, it is to be noted that a good management for a nuclear power reactor involves a ''good dependability management'' of the activities, such as: Reliability, Availability, Maintainability (RAM) and maintenance support. In order to evaluate certain safety assessment criteria intended to be applied at the level of the nuclear reactor unit management, equipment dependability indicators and their impact over the availability and reactor safety have to be evaluated. Reactor equipment dependability indicators provide a quantitative indication of equipment RAM performances (Reliability, Availability and Maintenance). One of the important benefits of maintenance and failure data gathering is that it can be used as a support of probabilistic safety assessment (PSA). Also, a good dependability management implementation may be used to complement reactor level unit performance indicators in the field of safe operation, maintenance and improving operating parameters, as well as for Strengthening Safety and Improving Reliability of a NPP. This paper underlines the importance of nuclear safety and security as prerequisites for nuclear power. In addition, it demonstrates how different technical aspects, through implementation of a good dependability management, contribute to a strengthened safety and an improvement of availability of the NPP through dependability indicators determination and evaluation. (author)

Norwegian national report. Joint convention on the safety of spent fuel management and on the safety of radioactive waste management

International Nuclear Information System (INIS)

2011-11-01

This report contains the national report from Norway to the fourth review meeting of the JointConvention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management to be held 14-23 May 2012. (Author)

Risk and Work Configuration Management as a Function of Integrated Safety Management

International Nuclear Information System (INIS)

Lana Buehrer; Michele Kelly; Fran Lemieux; Fred Williams

2007-01-01

National Security Technologies, LLC (NSTec), has established a work management program and corresponding electronic Facilities and Operations Management Information System (e-FOM) to implement Integrated Safety Management (ISM). The management of work scopes, the identification of hazards, and the establishment of implementing controls are reviewed and approved through electronic signatures. Through the execution of the program and the implementation of the electronic system, NSTec staff work within controls and utilize feedback and improvement process. The Integrated Work Control Manual further implements the five functions of ISM at the Activity level. By adding the Risk and Work Configuration Management program, NSTec establishes risk acceptance (business and physical) for liabilities within the performance direction and work management processes. Requirements, roles, and responsibilities are specifically identified in the program while e-FOM provides the interface and establishes the flowdown from the Safety Chain to work and facilities management processes to company work-related directives, and finally to Subject Matter Expert concurrence. The Program establishes, within the defined management structure, management levels for risk identification, risk mitigation (controls), and risk acceptance (business and physical) within the Safety Chain of Responsibility. The Program also implements Integrated Safeguards and Security Management within the NSTec Safety Chain of Responsibility. Once all information has been entered into e-FOM, approved, and captured as data, the information becomes searchable and sortable by hazard, location, organization, mitigating controls, etc

National report of the Slovak Republic compiled in terms of the join convention on the safety of spent fuel management and on the safety of radwaste management

International Nuclear Information System (INIS)

Jurina, V.; Viktory, D.; Petrik, T.; Sovcik, J.; Suess, J.; Tomek, J.; Lukacovic, J.; Ivan, J.; Ziakova, M.; Metke, E.; Pospisil, M.; Turner, M.; Homola, J.; Vaclav, J.; Bystricka, S.; Barbaric, M.; Horvath, J.; Betak, J.; Mihaly, B.; Adamovsky, V.; Baloghova, A.; Orihel, M.; Vasina, D.; Balaz, J.; Misovicova, D.; Vrtoch, M.; Mlcuch, J.; Granak, P.; Meleg, J.; Bardy, M.; Gogoliak, J.

2011-08-01

The National safety report of the Slovak Republic on the safety of spent fuel management and on the safety of radwaste management in 2011 is presented. These activities in the safety of spent fuel management and radioactive waste management in the Slovak Republic are reported under the headings: (A) Introduction; B) Concept for spent nuclear fuel management (SNF) and radwaste management (RAW); (C) Scope of application of the convention; (D) Spent fuel management and radioactive waste (RAW) management facilities; (E) Legislation and regulation; (F) General safety provisions; (G) Safety of spent fuel management; (H) Safety of radioactive waste (RAW) management; (I) Transboundary movement of spent nuclear fuel and radioactive waste; (J) Disused sealed sources; (K) Planned measures to improve safety; (L) Communication with the public; (M) Annexes. Annexes consists of following parts: I. List of nuclear facilities for spent fuel and RAW management. II. Limits of radioactive material discharges into atmosphere and hydrosphere. III. List of nuclear installations in decommissioning. IV. Inventory of stored spent nuclear fuel. V. Inventory of stored RAW. VI. List of national laws, decrees and guidelines. VII. List of international expert reports (including safety reports). VIII. List of authors.

The role of the ward manager in promoting patient safety.

Science.gov (United States)

Pinnock, David

In this article the role of the ward manager in promoting patient safety is explored. The background to the development of the patient safety agenda is briefly discussed and the relationship between quality and safety is illustrated. The pivotal importance of the role of the ward manager in delivering services to patients is underlined and literature on patient safety is examined to identify what a ward manager can do to make care safer. Possible actions of the ward manager to improve safety discussed in the literature are structured around the Leadership Framework. This framework identifies seven domains for the leadership of service delivery. Ward managers use their personal qualities, and network and work within teams, while managing performance and facilitating innovation, change and measurement for improvement. The challenge of promoting patient safety for ward managers is briefly explored and recommendations for further research are made.

Safety management of radioisotopes and others in educational institutions

International Nuclear Information System (INIS)

1981-01-01

Radioisotopes are extensively used in the fields of research in various educational institutions. While considerable progress has been seen in the safety management of RI utilization, such accidents as the loss of radioisotopes and radioactive contamination occurred. Under the situation, the safety management of RIs and others in RI-using facilities provided by the law has been examined by the ad hoc committee. A report by the committee is described as follows: need for a RI safety management organization, defining the responsibility of the chief technicians handling radiation, need for the practices of using RIs, etc. in education and traininng, planned RI-handling facilities, cautions for the loss of RIs and the contamination, centralization in RI safety management, improvement of remuneration for the chief technicians handling radiation, occasional restudy on the safety management of RIs, etc. (J.P.N.)

Applying Sensor-Based Technology to Improve Construction Safety Management.

Science.gov (United States)

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Administrative Management Competencies for Safety Professionals.

Science.gov (United States)

Blair, Earl H.; Logan, Joyce P.

1999-01-01

In a 1997 study, 245 safety professionals and educators identified and prioritized management competencies that are important for safety professionals. Results show that the most important competencies are communication, listening, motivating others, creative thinking, and flexibility. (JOW)

Measurement of Food Safety Culture using Survey and Maturity Profiling Tools

OpenAIRE

Jespersen, Lone; Griffiths, Mansel; Maclaurin, Tanya; Chapman, Ben; Wallace, Carol A.

2016-01-01

Organizational culture is defined by dimensions and characteristics that can be used to measure food safety culture in food manufacturing through a food safety maturity model. Maturity models from quality, health care, and information technology have been used since early 1970 and this work presents a novel food safety culture maturity model with five capability areas and food safety pinpointed behaviours specific to functions and levels in a food manufacturing company. A survey tool linked t...

Examining the Relationship Between Safety Management System Implementation and Safety Culture in Collegiate Flight Schools

OpenAIRE

Robertson, Michael F

2018-01-01

Safety management systems (SMS) are becoming the industry standard for safety management throughout the aviation industry. As the Federal Aviation Administration continues to mandate SMS for different segments, the assessment of an organization’s safety culture becomes more important. An SMS can facilitate the development of a strong aviation safety culture. This study describes how safety culture and SMS are integrated. The purpose of this study was to examine the relationship between an ...

Study Of Safety Management By Using Gis In Coimbatore

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-08-01

Full Text Available The safety management is very important in the process of construction .The traditional methods of construction safety control cannot meet the construction of big project. To ensure the safety of construction and reduce accidents in the process of construction the current situation and problems we face in construction safety management should be studied first. And then the project risk warning mechanism based on the GIS is constructed according to the problems we faced to achieve visual monitoring and warning of construction safety risk management and to provide decision support for construction. This project aims to develop a web-based spatial decision support system model for proactive health and safety management in linear construction projects. 5 Currently health and safety management is usually performed reactively instead of proactive management since hazard identification and risk assessment is mostly performed on paper based documents that are not effectively used at site. An information system relates to a chain of operations lead to planning the observation and collection of data to storage and analysis of data to the use of derived information in decision-making processes. To create a web-based free and open sourced GIS that can work with different data formats by exchanging and presenting data as a real-time map on web.

Module Testing Techniques for Nuclear Safety Critical Software Using LDRA Testing Tool

International Nuclear Information System (INIS)

Moon, Kwon-Ki; Kim, Do-Yeon; Chang, Hoon-Seon; Chang, Young-Woo; Yun, Jae-Hee; Park, Jee-Duck; Kim, Jae-Hack

2006-01-01

The safety critical software in the I and C systems of nuclear power plants requires high functional integrity and reliability. To achieve those requirement goals, the safety critical software should be verified and tested according to related codes and standards through verification and validation (V and V) activities. The safety critical software testing is performed at various stages during the development of the software, and is generally classified as three major activities: module testing, system integration testing, and system validation testing. Module testing involves the evaluation of module level functions of hardware and software. System integration testing investigates the characteristics of a collection of modules and aims at establishing their correct interactions. System validation testing demonstrates that the complete system satisfies its functional requirements. In order to generate reliable software and reduce high maintenance cost, it is important that software testing is carried out at module level. Module testing for the nuclear safety critical software has rarely been performed by formal and proven testing tools because of its various constraints. LDRA testing tool is a widely used and proven tool set that provides powerful source code testing and analysis facilities for the V and V of general purpose software and safety critical software. Use of the tool set is indispensable where software is required to be reliable and as error-free as possible, and its use brings in substantial time and cost savings, and efficiency

Integrated Management System in construction company-effective tool of quality, environment and safety level improving

OpenAIRE

Gašparík, Jozef

2009-01-01

Contribution Presents the struCture of integrated M anageMent systeM ( iMs) according to international standards ISO 9001:2008, ISO 14001:2004 and STN OHSAS 18001:2009, which consists of 3 management systems focused to quality, environment and safety of building processes. The purpose of paper is to describe basic steps concerning the development of IMS. Paper analises basic processes of IMS like company vision, IMS planning, implementing, monitoring, revive and improving. The paper presents ...

New Paradigm in Nuclear Safety from Quality Assurance to Safety Management System

International Nuclear Information System (INIS)

Lim, Nam-Jin; Park, Chan-Gook; Nam, Ji-Hee; Kim, Kwan-Hyun; Kwon, Hyuk-il; Lee, Young-Gun Lee

2006-01-01

The initial concept of Quality Control (QC) controlling the quality of products is now evolving toward the Management System (MS) achieving safety, through Quality Assurance (QA) ensuring the quality of products and Quality Management (QM) managing the quality by a systematic approach. Nuclear safety can be achieved through an integrated MS that ensures the health, environmental, security, quality and economic requirements being considered together with nuclear safety requirements. MS approach is developed through realizing that most of nuclear accidents had occurred not by the malfunction of hardware or equipment, but by the human error. The MS is a set of inter-related or interacting elements (system) that establishes policies and objectives and which enables those objectives to be achieved in an efficient and effective way

Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos

2009-01-01

Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: vasconv@cdtn.br, e-mail: silvaem@cdtn.br, e-mail: aclc@cdtn.br, e-mail: reissc@cdtn.br

2009-07-01

Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

Improving operational safety management through probabilistic safety assessment on personal computers

International Nuclear Information System (INIS)

1988-10-01

The Technical Committee Meeting considered the current effort in the implementation and use of PSA information for day-to-day operational safety management on Personal Computers. Due to the very recent development of the necessary hardware and software for Personal Computers, the application of PSA information for day-to-day operational safety management on PCs is essentially still in a pioneering stage. There is at present only one such system for end users existing, the PRISIM (Plant Risk Status Information Management) program for which a limited practical application experience is available. Others are still in the development stage. The main aim of the Technical Committee Meeting was to discuss the present status of PSA based systems for operational safety management support on small computers, to consider practical aspects when implementing these systems into a nuclear installation and to address problems related to the further work in the area. A separate abstract was prepared for the summary of the Technical Committee Meeting and for the 8 papers presented by the participants. Refs, figs and tabs

Research on station management in subway operation safety

Science.gov (United States)

Li, Yiman

2017-10-01

The management of subway station is an important part of the safe operation of urban subway. In order to ensure the safety of subway operation, it is necessary to study the relevant factors that affect station management. In the protection of subway safety operations on the basis of improving the quality of service, to promote the sustained and healthy development of subway stations. This paper discusses the influencing factors of subway operation accident and station management, and analyzes the specific contents of station management security for subway operation, and develops effective suppression measures. It is desirable to improve the operational quality and safety factor for subway operations.

A proposal of safety indicators aggregation to assess the safety management effectiveness of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Jose Antonio B.; Saldanha, Pedro L.C. [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao-Geral de Reatores e Ciclo Combustivel], e-mail: jantonio@cnen.gov.br, e-mail: saldanha@cnen.gov.br; Melo, Paulo F.F. Frutuoso e [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear], e-mail: frutuoso@con.ufrj.br

2009-07-01

Safety management has changed with the evolution of management methods, named Quality Systems, moving from Quality Control, where the focus was the product, passing through Quality Assurance, which takes care of the whole manufacturing process and reaching the Total Quality Management, where policies and goals are established. Nowadays, there is a trend towards Management Systems, which integrate all different aspects related to the management of an organization (safety, environment, security, quality, costs and, etc), but it is necessary to have features to establish and assure that safety overrides the remaining aspects. The most usual way to reach this goal is to establish a policy where safety is a priority, but its implementation and the assessment of its effectiveness are no so simple. Nuclear power plants usually have over a hundred safety indicators in many processes dedicated to prevent and detect problems, although a lot of them do not evaluate these indicators in an integrated manner or point out degradation trends of organizational aspects, which can affect the plant safety. This work develops an aggregation of proactive and reactive safety indicators in order to evaluate the effectiveness of nuclear power plant safety management and to detect, at early stages, signs of process degradation or activities used to establish, maintain and assure safety conditions. The aggregation integrates indicators of the usual processes and is based on the manner the management activities have been developed in the last decades, that is: Planning, Doing, Checking and Acting - known as PDCA cycle - plus a fifth element related to the capability of those who perform safety activities. The proposed aggregation is in accordance to Brazilian standards and international recommendations and constitutes a friendly link between the top management level and the daily aspects of the organization. (author)

A proposal of safety indicators aggregation to assess the safety management effectiveness of nuclear power plants

International Nuclear Information System (INIS)

Carvalho, Jose Antonio B.; Saldanha, Pedro L.C.; Melo, Paulo F.F. Frutuoso e

2009-01-01

Safety management has changed with the evolution of management methods, named Quality Systems, moving from Quality Control, where the focus was the product, passing through Quality Assurance, which takes care of the whole manufacturing process and reaching the Total Quality Management, where policies and goals are established. Nowadays, there is a trend towards Management Systems, which integrate all different aspects related to the management of an organization (safety, environment, security, quality, costs and, etc), but it is necessary to have features to establish and assure that safety overrides the remaining aspects. The most usual way to reach this goal is to establish a policy where safety is a priority, but its implementation and the assessment of its effectiveness are no so simple. Nuclear power plants usually have over a hundred safety indicators in many processes dedicated to prevent and detect problems, although a lot of them do not evaluate these indicators in an integrated manner or point out degradation trends of organizational aspects, which can affect the plant safety. This work develops an aggregation of proactive and reactive safety indicators in order to evaluate the effectiveness of nuclear power plant safety management and to detect, at early stages, signs of process degradation or activities used to establish, maintain and assure safety conditions. The aggregation integrates indicators of the usual processes and is based on the manner the management activities have been developed in the last decades, that is: Planning, Doing, Checking and Acting - known as PDCA cycle - plus a fifth element related to the capability of those who perform safety activities. The proposed aggregation is in accordance to Brazilian standards and international recommendations and constitutes a friendly link between the top management level and the daily aspects of the organization. (author)

Investigating road safety management processes in Europe.

NARCIS (Netherlands)

Jähi, H. Muhlrad, N. Buttler, I. Gitelman, V. Bax, C. Dupont, E. Giustiniani, G. Machata, K. Martensen, H. Papadimitriou, E. Persia, L. Talbot, R. Vallet, G. & Yannis, G.

2012-01-01

The work package 1 of the EC FP7 project DaCoTA investigates road safety management processes in Europe. It has drafted a model to investigate the state of the art of road safety policy-making and management at the national level and to define “good practice”. The DaCoTA “good practice”

Safety managements of the linear IFMIF/EVEDA prototype accelerator

International Nuclear Information System (INIS)

Takahashi, Hiroki; Maebara, Sunao; Kojima, Toshiyuki; Narita, Takahiro; Tsutsumi, Kazuyoshi; Sakaki, Hironao; Suzuki, Hiromitsu; Sugimoto, Masayoshi

2014-01-01

Highlights: •Safety management is needed to secure the personnel safety from high dose rate. •The management of access to the accelerator vault is mainly performed by PPS. •The operation management is needed for safety during Injector and RFQ commissioning. •Pulse Duty Management system is newly developed for Injector commissioning for operation management. •PDM system is useful to reduce the radioactivation of equipment and the radiation exposure during and after beam operation. -- Abstract: On the Linear IFMIF/EVEDA Prototype Accelerator (LIPAc), the validation up to 9 MeV deuteron beam with 125 mA continuous wave is planned in Rokkasho, Aomori, Japan. Since the deuteron beam power exceeds 1 MW, safety issue related to γ-ray and neutron production is critical. To establish the safety management indispensable to reduce radiation exposure for personnel and activation of accelerator equipment, Personnel Protection System (PPS) of LIPAc control system, which works together with Radiation Monitoring System and Access Control System, was developed for LIPAc. The management of access to the accelerator vault by PPS and the beam duty management of PPS are presented in details

Human and organizational biases affecting the management of safety

Energy Technology Data Exchange (ETDEWEB)

Reiman, Teemu, E-mail: teemu.reiman@vtt.fi [VTT, Espoo (Finland); Rollenhagen, Carl [KTH, Stockholm (Sweden)

2011-10-15

Management of safety is always based on underlying models or theories of organization, human behavior and system safety. The aim of the article is to review and describe a set of potential biases in these models and theories. We will outline human and organizational biases that have an effect on the management of safety in four thematic areas: beliefs about human behavior, beliefs about organizations, beliefs about information and safety models. At worst, biases in these areas can lead to an approach where people are treated as isolated and independent actors who make (bad) decisions in a social vacuum and who pose a threat to safety. Such an approach aims at building barriers and constraints to human behavior and neglects the measures aiming at providing prerequisites and organizational conditions for people to work effectively. This reductionist view of safety management can also lead to too drastic a strong separation of so-called human factors from technical issues, undermining the holistic view of system safety. Human behavior needs to be understood in the context of people attempting (together) to make sense of themselves and their environment, and act based on perpetually incomplete information while relying on social conventions, affordances provided by the environment and the available cognitive heuristics. In addition, a move toward a positive view of the human contribution to safety is needed. Systemic safety management requires an increased understanding of various normal organizational phenomena - in this paper discussed from the point of view of biases - coupled with a systemic safety culture that encourages and endorses a holistic view of the workings and challenges of the socio-technical system in question. - Highlights: > Biases in safety management approaches are reviewed and described. > Four thematic areas are covered: human behavior, organizations, information, safety models. > The biases influence how safety management is defined, executed

Human and organizational biases affecting the management of safety

International Nuclear Information System (INIS)

Reiman, Teemu; Rollenhagen, Carl

2011-01-01

Management of safety is always based on underlying models or theories of organization, human behavior and system safety. The aim of the article is to review and describe a set of potential biases in these models and theories. We will outline human and organizational biases that have an effect on the management of safety in four thematic areas: beliefs about human behavior, beliefs about organizations, beliefs about information and safety models. At worst, biases in these areas can lead to an approach where people are treated as isolated and independent actors who make (bad) decisions in a social vacuum and who pose a threat to safety. Such an approach aims at building barriers and constraints to human behavior and neglects the measures aiming at providing prerequisites and organizational conditions for people to work effectively. This reductionist view of safety management can also lead to too drastic a strong separation of so-called human factors from technical issues, undermining the holistic view of system safety. Human behavior needs to be understood in the context of people attempting (together) to make sense of themselves and their environment, and act based on perpetually incomplete information while relying on social conventions, affordances provided by the environment and the available cognitive heuristics. In addition, a move toward a positive view of the human contribution to safety is needed. Systemic safety management requires an increased understanding of various normal organizational phenomena - in this paper discussed from the point of view of biases - coupled with a systemic safety culture that encourages and endorses a holistic view of the workings and challenges of the socio-technical system in question. - Highlights: → Biases in safety management approaches are reviewed and described. → Four thematic areas are covered: human behavior, organizations, information, safety models. → The biases influence how safety management is defined

Renewal of JOYO plant operation management expert tool (JOYPET)

International Nuclear Information System (INIS)

Okawa, Toshikatsu; Aita, Tsuyoshi; Murakami, Takanori; Ito, Hideaki; Aoki; Hiroshi; Oda, Toshihiro

2004-03-01

JOYO Plant Operation Management Expert Tool system named JOYPET has been developed with the aim of confirming the stable and safety operation of JOYO and improving operational reliability in future FBR plants. New JOYPET system was designed and manufactured in 2002, and began on operation in 2003, because the former system, which was designed in 1988 and operated from 1991 to 2002, was superannuated, and it was difficult to obtain alternative hardwares and replace parts. The difference between the former system and the later new one was adopted the web-online system to use LAN (Local Area Network) instead of the host and the terminal computer system. Then the new system enabled to take unitary document management for reactor operation, and each person was able to search, refer and make document on line directly. This paper summarized the new JOYPET system design, manufacturing, system constitution and operation actual result. (author)

Lean Six-Sigma in Aviation Safety: An implementation guide for measuring aviation system’s safety performance

OpenAIRE

Panagopoulos, I.; Atkin, C.J.; Sikora, I.

2016-01-01

The paper introduces a conceptual framework that could improve the safety performance measurement process and ultimately the aviation system safety performance. The framework provides an implementation guide on how organisations could design and develop a proactive, measurement tool for assessing and measuring the Acceptable Level of Safety Performance (ALoSP) at sigma (σ) level, a statistical measurement unit. In fact, the methodology adapts and combines quality management tools, a leading i...

Examining the Relationship between Safety Management System Implementation and Safety Culture in Collegiate Flight Schools

Science.gov (United States)

Robertson, Mike Fuller

2017-01-01

Safety Management Systems (SMS) are becoming the industry standard for safety management throughout the aviation industry. As the Federal Aviation Administration (FAA) continues to mandate SMS for different segments, the assessment of an organization's safety culture becomes more important. An SMS can facilitate the development of a strong…

Managing health and safety risks: Implications for tailoring health and safety management system practices.

Science.gov (United States)

Willmer, D R; Haas, E J

2016-01-01

As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

Safety cost management in construction companies: A proposal classification.

Science.gov (United States)

López-Alonso, M; Ibarrondo-Dávila, M P; Rubio, M C

2016-06-16

Estimating health and safety costs in the construction industry presents various difficulties, including the complexity of cost allocation, the inadequacy of data available to managers and the absence of an accounting model designed specifically for safety cost management. Very often, the costs arising from accidents in the workplace are not fully identifiable due to the hidden costs involved. This paper reviews some studies of occupational health and safety cost management and proposes a means of classifying these costs. We conducted an empirical study in which the health and safety costs of 40 construction worksites are estimated. A new classification of the health and safety cost and its categories is proposed: Safety and non-safety costs. The costs of the company's health and safety policy should be included in the information provided by the accounting system, as a starting point for analysis and control. From this perspective, a classification of health and safety costs and its categories is put forward.

Investigation of status of safety management in radiation handle works

International Nuclear Information System (INIS)

Amauchi, Hiroshi; Nishimura, Kenji; Izumi, Kokichi

2007-01-01

This report describes the investigation in the title concerning the system for safety management and for accident prevention, which was done by a questionnaire in a period of 1.5 months in 2005. The questionnaire including 55 questions for safety management system, 33 for instruments and safety utilization of radiation and 57 for present status of safety management in high-risk radiation works, was performed in 780 hospitals, of which 313 answered. The first 55 questions concerned with the facility, patient identification, information exchange, management of private information, safety management activities, measures to prevent accident, manual preparation, personnel education and safety awareness; the second, with management of instruments, package insert, system for reporting the safety information, management of implants, re-imaging and radiation protection; and the third, with the systems for patients' emergency, in departments of CT/MR, of IVR, of nuclear diagnosis and of radiation therapy. Based on the results obtained, many problems, tasks and advices are presented to various items and further continuation of efforts to improve the present status is mentioned to be necessary. Details are given in the homepage of the Japanese Society of Radiological Technology. (T.I.)

Project safety studies - nuclear waste management (PSE)

International Nuclear Information System (INIS)

1981-10-01

The project 'Safety Studies-Nuclear Waste Management' (PSE) is a research project performed by order of the Federal Minister for Research and Technology, the general purpose of which is to deepen and ensure the understanding of the safety aspects of the nuclear waste management and to prepare a risk analysis which will have to be established in the future. Owing to this the project is part of a series of projects which serve the further development of the concept of nuclear waste management and its safety, and which are set up in such a way as to accompany the realization of that concept. This report contains the results of the first stage of the project from 1978 to mid-1981. (orig./RW) [de

Cockpit Resource Management (CRM): A tool for improved flight safety (United Airlines CRM training)

Science.gov (United States)

Carroll, J. E.; Taggart, William R.

1987-01-01

The approach and methodology used in developing cockpit management skills is effective because of the following features: (1) A comparative method of learning is used enabling crewmembers to study different forms of teamwork. (2) The learning comes about as a result of crewmembers learning from one another instead of from an expert instructor. (3) Key elements of cockpit teamwork and effective management are studied so that crewmembers can determine how these elements can improve safety and problem solving. (4) Critique among the crewmembers themselves rather than from outsiders is used as a common focusing point for crews to provide feedback to one another on how each can be a more effective crewmember. (5) The training is continuous in the sense that it becomes part of recurrent, upgrade, and other forms of crewmember training and development. And (6) the training results in sound and genuine insights that come about through solid education as opposed to tutoring, coaching, or telling crewmembers how to behave more effectively.

Screening of Gas-Cooled Reactor Thermal-Hydraulic and Safety Analysis Tools and Experimental Database

International Nuclear Information System (INIS)

Lee, Won Jae; Kim, Min Hwan; Lee, Seung Wook

2007-08-01

This report is a final report of I-NERI Project, 'Screening of Gas-cooled Reactor Thermal Hydraulic and Safety Analysis Tools and Experimental Database 'jointly carried out by KAERI, ANL and INL. In this study, we developed the basic technologies required to develop and validate the VHTR TH/safety analysis tools and evaluated the TH/safety database information. The research tasks consist of; 1) code qualification methodology (INL), 2) high-level PIRTs for major nucleus set of events (KAERI, ANL, INL), 3) initial scaling and scoping analysis (ANL, KAERI, INL), 4) filtering of TH/safety tools (KAERI, INL), 5) evaluation of TH/safety database information (KAERI, INL, ANL) and 6) key scoping analysis (KAERI). The code qualification methodology identifies the role of PIRTs in the R and D process and the bottom-up and top-down code validation methods. Since the design of VHTR is still evolving, we generated the high-level PIRTs referencing 600MWth block-type GT-MHR and 400MWth pebble-type PBMR. Nucleus set of events that represents the VHTR safety and operational transients consists of the enveloping scenarios of HPCC (high pressure conduction cooling: loss of primary flow), LPCC/Air-Ingress (low pressure conduction cooling: loss of coolant), LC (load changes: power maneuvering), ATWS (anticipated transients without scram: reactivity insertion), WS (water ingress: water-interfacing system break) and HU (hydrogen-side upset: loss of heat sink). The initial scaling analysis defines dimensionless parameters that need to be reflected in mixed convection modeling and the initial scoping analysis provided the reference system transients used in the PIRTs generation. For the PIRTs phenomena, we evaluated the modeling capability of the candidate TH/safety tools and derived a model improvement need. By surveying and evaluating the TH/safety database information, a tools V and V matrix has been developed. Through the key scoping analysis using available database, the modeling

Screening of Gas-Cooled Reactor Thermal-Hydraulic and Safety Analysis Tools and Experimental Database

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Jae; Kim, Min Hwan; Lee, Seung Wook (and others)

2007-08-15

This report is a final report of I-NERI Project, 'Screening of Gas-cooled Reactor Thermal Hydraulic and Safety Analysis Tools and Experimental Database 'jointly carried out by KAERI, ANL and INL. In this study, we developed the basic technologies required to develop and validate the VHTR TH/safety analysis tools and evaluated the TH/safety database information. The research tasks consist of; 1) code qualification methodology (INL), 2) high-level PIRTs for major nucleus set of events (KAERI, ANL, INL), 3) initial scaling and scoping analysis (ANL, KAERI, INL), 4) filtering of TH/safety tools (KAERI, INL), 5) evaluation of TH/safety database information (KAERI, INL, ANL) and 6) key scoping analysis (KAERI). The code qualification methodology identifies the role of PIRTs in the R and D process and the bottom-up and top-down code validation methods. Since the design of VHTR is still evolving, we generated the high-level PIRTs referencing 600MWth block-type GT-MHR and 400MWth pebble-type PBMR. Nucleus set of events that represents the VHTR safety and operational transients consists of the enveloping scenarios of HPCC (high pressure conduction cooling: loss of primary flow), LPCC/Air-Ingress (low pressure conduction cooling: loss of coolant), LC (load changes: power maneuvering), ATWS (anticipated transients without scram: reactivity insertion), WS (water ingress: water-interfacing system break) and HU (hydrogen-side upset: loss of heat sink). The initial scaling analysis defines dimensionless parameters that need to be reflected in mixed convection modeling and the initial scoping analysis provided the reference system transients used in the PIRTs generation. For the PIRTs phenomena, we evaluated the modeling capability of the candidate TH/safety tools and derived a model improvement need. By surveying and evaluating the TH/safety database information, a tools V and V matrix has been developed. Through the key scoping analysis using available database, the

Ethical issues in patient safety: Implications for nursing management.

Science.gov (United States)

Kangasniemi, Mari; Vaismoradi, Mojtaba; Jasper, Melanie; Turunen, Hannele

2013-12-01

The purpose of this article is to discuss the ethical issues impacting the phenomenon of patient safety and to present implications for nursing management. Previous knowledge of this perspective is fragmented. In this discussion, the main drivers are identified and formulated in 'the ethical imperative' of patient safety. Underlying values and principles are considered, with the aim of increasing their visibility for nurse managers' decision-making. The contradictory nature of individual and utilitarian safety is identified as a challenge in nurse management practice, together with the context of shared responsibility and identification of future challenges. As a conclusion, nurse managers play a strategic role in patient safety. Their role is to incorporate ethical values of patient safety into decision-making at all levels in an organization, and also to encourage clinical nurses to consider values in the provision of care to patients. Patient safety that is sensitive to ethics provides sustainable practice where the humanity and dignity of all stakeholders are respected.

Self arrangements in occupational safety and health management

International Nuclear Information System (INIS)

Ismail Bahari

2002-01-01

The book is written with the awareness of safe work culture where success does not lie to compliance with the law only. Instead it is more of an excellent management based on the principle of self organization. Self arrangements in the management of occupational safety and health do not rest on the shoulders of the employer or the safety management and safety communities, but are committed together with the leadership of the employer. Self arrangements will be more meaningful and successful if those involved have knowledge about the philosophy and principles of why and how this management is done, and so the method can be practiced and eventually cultivated as a working system. (author)

Evaluation of safety management in an Appliances manufacturing company

Directory of Open Access Journals (Sweden)

F. Golbabaei

2015-01-01

Full Text Available Introduction: Prevention of accidents and work related diseases, are not allowed regardless of the safety of employees, customers, contractors and other persons. Assessment of individual safety management activities could reduce many losses. Present study aimed to evaluate the safety management of a household appliance manufacturing company.  .Material and Method: This study has done in a household appliance manufacturing company in Damavand city. Two questionnaires were firstly designed based on the weighted scores. The questionnaire 1 consisted of 4 indicators: Safety of machinery, Electrical safety, Risk assessment and Fire safety. Questionnaire 2 consisted of 11 sub indicators. Both questionnaires were completed by 30 HSE experts and supervisors. Reliability of questionnaires was based on cronbachs alpha coefficient. the safety status of each unit was determined and scored using information acquired by the questionnaires. Lastly, the safety of the entire company was determined.  .Result: Results showed that in safety management: the pressing and store house were in a good range of 66.66 and 60.12 points. Powder painting, enameling, laboratory were in a average range of 56.25, 55.92 and 54.15 points. Assembling and door storage were in a week range of 46.06 points.  .Conclusion: The findings showed that the safety status in the studied appliances company is in average range with 55.45 points. Therefore, it is recommended that the safety indicators should be improved for the betterment of the safety management in the company.

From aviation to medicine: applying concepts of aviation safety to risk management in ambulatory care.

Science.gov (United States)

Wilf-Miron, R; Lewenhoff, I; Benyamini, Z; Aviram, A

2003-02-01

The development of a medical risk management programme based on the aviation safety approach and its implementation in a large ambulatory healthcare organisation is described. The following key safety principles were applied: (1). errors inevitably occur and usually derive from faulty system design, not from negligence; (2). accident prevention should be an ongoing process based on open and full reporting; (3). major accidents are only the "tip of the iceberg" of processes that indicate possibilities for organisational learning. Reporting physicians were granted immunity, which encouraged open reporting of errors. A telephone "hotline" served the medical staff for direct reporting and receipt of emotional support and medical guidance. Any adverse event which had learning potential was debriefed, while focusing on the human cause of error within a systemic context. Specific recommendations were formulated to rectify processes conducive to error when failures were identified. During the first 5 years of implementation, the aviation safety concept and tools were successfully adapted to ambulatory care, fostering a culture of greater concern for patient safety through risk management while providing support to the medical staff.

Open Source and Proprietary Project Management Tools for SMEs.

Directory of Open Access Journals (Sweden)

Veronika Abramova

2017-05-01

Full Text Available The dimensional growth and increasing difficulty in project management promoted the development of different tools that serve to facilitate project management and track project schedule, resources and overall progress. These tools offer a variety of features, from task and time management, up to integrated CRM (Customer Relationship Management and ERP (Enterprise Resource Planning modules. Currently, a large number of project management software is available, to assist project team during the entire project lifecycle. We present the main differences between open source and proprietary project management tools and how those could be important for SMEs, describing the key features and how those can assist the project manager and the development team. In this paper, we analyse four open-source project management tools: OpenProject, ProjectLibre, Redmine, LibrePlan and four proprietary tools: Bitrix24, JIRA, Microsoft Project and Asana.

Development of a core management tool for MYRRHA

International Nuclear Information System (INIS)

Jalůvka, David; Van den Eynde, Gert; Vandewalle, Stefan

2013-01-01

Highlights: • An in-core fuel management tool is being developed for the flexible irradiation machine MYRRHA. • Specific issues of the MYRRHA in-core fuel management are briefly discussed. • The tool addresses the loading pattern optimization problem. • Illustrative in-core fuel management optimization problems are solved using the tool. - Abstract: MYRRHA is an advanced multi-purpose irradiation facility under development at SCK• CEN in Mol, Belgium. In order to ensure an economical and safe operation of the reactor, an in-core fuel management tool is being developed within the project to address the loading pattern optimization problem. In the paper, the current version of the tool – its architecture and design, unique features, and the field of its application, are presented. In the second part of the paper, the tool’s capabilities are demonstrated on simple MYRRHA in-core fuel management optimization problems

Food safety objective: an integral part of food chain management

NARCIS (Netherlands)

Gorris, L.G.M.

2005-01-01

The concept of food safety objective has been proposed to provide a target for operational food safety management, leaving flexibility in the way equivalent food safety levels are achieved by different food chains. The concept helps to better relate operational food safety management to public

The Management System for Nuclear Installations Safety Guide

International Nuclear Information System (INIS)

2009-01-01

This Safety Guide is applicable throughout the lifetime of a nuclear installation, including any subsequent period of institutional control, until there is no significant residual radiation hazard. For a nuclear installation, the lifetime includes site evaluation, design, construction, commissioning, operation and decommissioning. These stages in the lifetime of a nuclear installation may overlap. This Safety Guide may be applied to nuclear installations in the following ways: (a)To support the development, implementation, assessment and improvement of the management system of those organizations responsible for research, site evaluation, design, construction, commissioning, operation and decommissioning of a nuclear installation; (b)As an aid in the assessment by the regulatory body of the adequacy of the management system of a nuclear installation; (c)To assist an organization in specifying to a supplier, via contractual documentation, any specific element that should be included within the supplier's management system for the supply of products. This Safety Guide follows the structure of the Safety Requirements publication on The Management System for Facilities and Activities, whereby: (a)Section 2 provides recommendations on implementing the management system, including recommendations relating to safety culture, grading and documentation. (b)Section 3 provides recommendations on the responsibilities of senior management for the development and implementation of an effective management system. (c)Section 4 provides recommendations on resource management, including guidance on human resources, infrastructure and the working environment. (d)Section 5 provides recommendations on how the processes of the installation can be specified and developed, including recommendations on some generic processes of the management system. (e)Section 6 provides recommendations on the measurement, assessment and improvement of the management system of a nuclear installation. (f

Conception of a PWR simulator as a tool for safety analysis

International Nuclear Information System (INIS)

Lanore, J.M.; Bernard, P.; Romeyer Dherbey, J.; Bonnet, C.; Quilchini, P.

1982-09-01

A simulator can be a very useful tool for safety analysis to study accident sequences involving malfunctions of the systems and operator interventions. The main characteristics of the simulator SALAMANDRE (description of the systems, physical models, programming organization, control desk) have then been selected according tot he objectives of safety analysis

Safety risk management of underground engineering in China: Progress, challenges and strategies

Directory of Open Access Journals (Sweden)

Qihu Qian

2016-08-01

Full Text Available Underground construction in China is featured by large scale, high speed, long construction period, complex operation and frustrating situations regarding project safety. Various accidents have been reported from time to time, resulting in serious social impact and huge economic loss. This paper presents the main progress in the safety risk management of underground engineering in China over the last decade, i.e. (1 establishment of laws and regulations for safety risk management of underground engineering, (2 implementation of the safety risk management plan, (3 establishment of decision support system for risk management and early-warning based on information technology, and (4 strengthening the study on safety risk management, prediction and prevention. Based on the analysis of the typical accidents in China in the last decade, the new challenges in the safety risk management for underground engineering are identified as follows: (1 control of unsafe human behaviors; (2 technological innovation in safety risk management; and (3 design of safety risk management regulations. Finally, the strategies for safety risk management of underground engineering in China are proposed in six aspects, i.e. the safety risk management system and policy, law, administration, economy, education and technology.

Management of safety culture

International Nuclear Information System (INIS)

Kavsek, D.

2004-01-01

The strengthening of safety culture in an organization has become an increasingly important issue for nuclear industry. A high level of safety performance is essential for business success in intensely competitive global environment. This presentation offers a discussion of some principles and activities used in enhancing safety performance and appropriate safety behaviour at the Krsko NPP. Over the years a number of events have occurred in nuclear industry that have involved problems in human performance. A review of these and other significant events has identified recurring weaknesses in plant safety culture and policy. Focusing attention on the strengthening of relevant processes can help plants avoid similar undesirable events. The policy of the Krsko NPP is that all employees concerned shall constantly be alert to opportunities to reduce risks to the lowest practicable level and to achieve excellence in plant safety. The most important objective is to protect individuals, society and the environment by establishing and maintaining an effective defense against radiological hazard in the nuclear power plant. It is achieved through the use of reliable structures, components, systems, and procedures, as well as plant personnel committed to a strong safety culture. The elements of safety culture include both organizational and individual aspects. Elements commonly included at the organizational level are senior management commitment to safety, organizational effectiveness, effective communication, organizational learning, and a culture that encourages identification and resolution of safety issues. Elements identified at the individual level include personal accountability, a questioning attitude, communication, procedural adherence, etc.(author)

Road safety issues for bus transport management.

Science.gov (United States)

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

New safety management method at Cominak

International Nuclear Information System (INIS)

Kallam, A.

1993-01-01

Operations manager Mr. Kallam presents the new safety management system, its implementation and results in this underground uranium mine in northern Niger, where the rate of accidents increased dangerously during the eighties. 3 figs., 3 photos

Life Management and Safety of Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Fabbri, S.; Diluch, A.; Vega, G., E-mail: fabbri@cnea.gov.ar [Comisión Nacional de Energía Atómica, Buenos Aires (Argentina)

2014-10-15

The nuclear programme in Argentina includes: nuclear power and related supplies, medical and industrial applications, waste management, research and development and human training. Nuclear facilities require life management programs that allow a safe operation. Safety is the first priority for designers and operators. This can be attained with defence in depth: regular inspections and maintenance procedures to minimize failure risks. CNEA objectives in this area are to possess the necessary capability to give safe and fast technical support. Within this scheme, one of the main activities undertaken by CNEA is to provide technological assistance to the nuclear plants and research reactors. As a consequence of an increasing concern about safety and ageing a Life Management Department for safe operation was created to take care of these subjects. The goal is to elaborate a Safety Evaluation Process for the critical components of nuclear plants and other facilities. The overall objectives of a safety process are to ensure a continuous safe, reliable and effective operation of nuclear facilities and it means the implementation of the defence in deep concept to enhance safety for the protection of the public, the workers and the environment. (author)

Process management - critical safety issues with focus on risk management

International Nuclear Information System (INIS)

Sanne, Johan M.

2005-12-01

Organizational changes focused on process orientation are taking place among Swedish nuclear power plants, aiming at improving the operation. The Swedish Nuclear Power Inspectorate has identified a need for increased knowledge within the area for its regulatory activities. In order to analyze what process orientation imply for nuclear power plant safety a number of questions must be asked: 1. How is safety in nuclear power production created currently? What significance does the functional organization play? 2. How can organizational forms be analysed? What consequences does quality management have for work and for the enterprise? 3. Why should nuclear power plants be process oriented? Who are the customers and what are their customer values? Which customers are expected to contribute from process orientation? 4. What can one learn from process orientation in other safety critical systems? What is the effect on those features that currently create safety? 5. Could customer values increase for one customer without decreasing for other customers? What is the relationship between economic and safety interests from an increased process orientation? The deregulation of the electricity market have caused an interest in increased economic efficiency, which is the motivation for the interest in process orientation. among other means. It is the nuclear power plants' owners and the distributors (often the same corporations) that have the strongest interest in process orientation. If the functional organization and associated practices are decomposed, the prerequisites of the risk management regime changes, perhaps deteriorating its functionality. When nuclear power operators consider the introduction of process orientation, the Nuclear Power Inspectorate should require that 1. The operators perform a risk analysis beforehand concerning the potential consequences that process orientation might convey: the analysis should contain a model specifying how safety is currently

Organizational and methodological aspects for contemporary health and safety management system

Directory of Open Access Journals (Sweden)

Sugak Evgeny

2017-01-01

Full Text Available Industrial injuries and work-related disorders considerable lowering we are facing in developed countries may be due to switching to a new health and safety management system entitled “Occupational Safety and Health Management System”. The Russian Federation has prepared certain regulatory documents prescribing some suggestions regarding implementing the contemporary system for industrial injuries prevention based upon the methods for professional risks management. However, despite the efforts made by the Russian Government, reformation of the health and safety management system at various companies is being performed rather slowly that may be as well owing to poor competence of managers and specialists regarding contemporary labor safety model content, methodical and organizational novations in the sphere of occupational safety and health management.. The article refers to a number of principal issues distinguishing the new health and safety management system from conventional approach.

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries

OpenAIRE

McGonagle, Alyssa K.; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42...

Development of an Evaluation Tool for Online Food Safety Training Programs

Science.gov (United States)

Neal, Jack A., Jr.; Murphy, Cheryl A.; Crandall, Philip G.; O'Bryan, Corliss A.; Keifer, Elizabeth; Ricke, Steven C.

2011-01-01

The objective of this study was to provide the person in charge and food safety instructors an assessment tool to help characterize, identify strengths and weaknesses, determine the completeness of the knowledge gained by the employee, and evaluate the level of content presentation and usability of current retail food safety training platforms. An…

Implementing process safety management in gas processing operations

International Nuclear Information System (INIS)

Rodman, D.L.

1992-01-01

The Occupational Safety and Health Administration (OSHA) standard entitled Process Safety Management of Highly Hazardous Chemicals; Explosives and Blasting Agents was finalized February 24, 1992. The purpose of the standard is to prevent or minimize consequences of catastrophic releases of toxic, flammable, or explosive chemicals. OSHA believes that its rule will accomplish this goal by requiring a comprehensive management program that integrates technologies, procedures, and management practices. Gas Processors Association (GPA) member companies are significantly impacted by this major standard, the requirements of which are extensive and complex. The purpose of this paper is to review the requirements of the standard and to discuss the elements to consider in developing and implementing a viable long term Process Safety Management Program

Safety Psychology Applicating on Coal Mine Safety Management Based on Information System

Science.gov (United States)

Hou, Baoyue; Chen, Fei

In recent years, with the increase of intensity of coal mining, a great number of major accidents happen frequently, the reason mostly due to human factors, but human's unsafely behavior are affected by insecurity mental control. In order to reduce accidents, and to improve safety management, with the help of application security psychology, we analyse the cause of insecurity psychological factors from human perception, from personality development, from motivation incentive, from reward and punishment mechanism, and from security aspects of mental training , and put forward countermeasures to promote coal mine safety production,and to provide information for coal mining to improve the level of safety management.

Evaluation of static analysis tools used to assess software important to nuclear power plant safety

Energy Technology Data Exchange (ETDEWEB)

Ourghanlian, Alain [EDF Lab CHATOU, Simulation and Information Technologies for Power Generation Systems Department, EDF R and D, Cedex (France)

2015-03-15

We describe a comparative analysis of different tools used to assess safety-critical software used in nuclear power plants. To enhance the credibility of safety assessments and to optimize safety justification costs, Electricit e de France (EDF) investigates the use of methods and tools for source code semantic analysis, to obtain indisputable evidence and help assessors focus on the most critical issues. EDF has been using the PolySpace tool for more than 10 years. Currently, new industrial tools based on the same formal approach, Abstract Interpretation, are available. Practical experimentation with these new tools shows that the precision obtained on one of our shutdown systems software packages is substantially improved. In the first part of this article, we present the analysis principles of the tools used in our experimentation. In the second part, we present the main characteristics of protection-system software, and why these characteristics are well adapted for the new analysis tools.

The role of knowledge management tools in supporting sustainable forest management

Energy Technology Data Exchange (ETDEWEB)

Vacik, H.; Torresan, C.; Hujala, T.; Khadka, C.; Reynolds, K.

2013-07-01

Aim of study: Knowledge Management (KM) tools facilitate the implementation of knowledge processes by identifying, creating, structuring, and sharing knowledge through use of information technology in order to improve decision-making. In this contribution, we review the way in which KM tools and techniques are used in forest management, and categorize a selected set of them according to their contribution to support decision makers in the phases of problem identification, problem modelling, and problem solving. Material and methods: Existing examples of cognitive mapping tools, web portals, work flow systems, best practices, and expert systems as well as intelligent agents are screened for their applicability and use in the context of decision support for sustainable forest management. Evidence from scientific literature and case studies is utilized to evaluate the contribution of the different KM tools to support problem identification, problem modelling, and problem solving. Main results: Intelligent agents, expert systems and cognitive maps support all phases of the forest planning process strongly. Web based tools have good potential to support participatory forest planning. Based on the needs of forest management decision support and the thus-far under utilized capabilities of KM tools it becomes evident that future decision analysis will have to consider the use of KM more intensively. Research highlights: As the problem-solving process is the vehicle for connecting both knowledge and decision making performance, the next generation of DSS will need to better encapsulate practices that enhance and promote knowledge management. Web based tools will substitute desktop applications by utilizing various model libraries on the internet. (Author)

Establishing management information system to solve the information management problem of nuclear safety related personnel's qualification management

International Nuclear Information System (INIS)

Sun Haipeng; Liu Zhijun; Li Tianshu

2013-01-01

With the rapid progress of nuclear energy and nuclear technology utilization, nuclear safety related personnel play an increasingly important role in ensuring nuclear safety. NNSA personnel qualification management information system conducts a multi-faceted, effective, real-time monitoring and information collection for nuclear safety staff practice unit management, knowledge management, license application, appraisal management or supervision, training management or supervision and certified staff management, and also is a milestone for NNSA to build the state department with 'five-feature' (learning-oriented, service-oriented, economical, innovative, clean-type). (authors)

Radiation safety management system in a radioactive facility

International Nuclear Information System (INIS)

Amador, Zayda H.

2008-01-01

Full text: This paper illustrates the Cuban experience in implementing and promoting an effective radiation safety system for the Centre of Isotopes, the biggest radioactive facility of our country. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. All those areas of the radiation protection program are considered (e.g. licensing and training of the staff, occupational exposure, authorization of the practices, control of the radioactive material, radiological occurrences, monitoring equipment, radioactive waste management, public exposure due to airborne effluents, audits and safety costs). A set of indicators designed to monitor key aspects of operational safety performance are used. Their trends over a period of time are analyzed with the modern information technologies, because this can provide an early warning to plant management for searching causes behind the observed changes. In addition to analyze the changes and trends, these indicators are compared against identified targets and goals to evaluate performance strengths and weaknesses. A structured and proper radiation self-auditing system is seen as a basic requirement to meet the current and future needs in sustainability of radiation safety. The integrated safety management system establishment has been identified as a goal and way for the continuous improvement. (author)

The practical implementation of integrated safety management for nuclear safety analysis and fire hazards analysis documentation

International Nuclear Information System (INIS)

COLLOPY, M.T.

1999-01-01

In 1995 Mr. Joseph DiNunno of the Defense Nuclear Facilities Safety Board issued an approach to describe the concept of an integrated safety management program which incorporates hazard and safety analysis to address a multitude of hazards affecting the public, worker, property, and the environment. Since then the U S . Department of Energy (DOE) has adopted a policy to systematically integrate safety into management and work practices at all levels so that missions can be completed while protecting the public, worker, and the environment. While the DOE and its contractors possessed a variety of processes for analyzing fire hazards at a facility, activity, and job; the outcome and assumptions of these processes have not always been consistent for similar types of hazards within the safety analysis and the fire hazard analysis. Although the safety analysis and the fire hazard analysis are driven by different DOE Orders and requirements, these analyses should not be entirely independent and their preparation should be integrated to ensure consistency of assumptions, consequences, design considerations, and other controls. Under the DOE policy to implement an integrated safety management system, identification of hazards must be evaluated and agreed upon to ensure that the public. the workers. and the environment are protected from adverse consequences. The DOE program and contractor management need a uniform, up-to-date reference with which to plan. budget, and manage nuclear programs. It is crucial that DOE understand the hazards and risks necessarily to authorize the work needed to be performed. If integrated safety management is not incorporated into the preparation of the safety analysis and the fire hazard analysis, inconsistencies between assumptions, consequences, design considerations, and controls may occur that affect safety. Furthermore, confusion created by inconsistencies may occur in the DOE process to grant authorization of the work. In accordance with

Development of the Advanced Nuclear Safety Information Management (ANSIM) System

Energy Technology Data Exchange (ETDEWEB)

Sohn, Jae Min; Ko, Young Cheol; Song, Tai Gil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

Korea has become a technically independent nuclear country and has grown into an exporter of nuclear technologies. Thus, nuclear facilities are increasing in significance at KAERI (Korea Atomic Energy Research Institute), and it is time to address the nuclear safety. The importance of nuclear safety cannot be overemphasized. Therefore, a management system is needed urgently to manage the safety of nuclear facilities and to enhance the efficiency of nuclear information. We have established ISP (Information Strategy Planning) for the Integrated Information System of nuclear facility and safety management. The purpose of this paper is to develop a management system for nuclear safety. Therefore, we developed the Advanced Nuclear Safety Information Management system (hereinafter referred to as the 'ANSIM system'). The ANSIM system has been designed and implemented to computerize nuclear safety information for standardization, integration, and sharing in real-time. Figure 1 shows the main home page of the ANSIM system. In this paper, we describe the design requirements, contents, configurations, and utilizations of the ANSIM system

Measurement tools and process indicators of patient safety culture in primary care. A mixed methods study by the LINNEAUS collaboration on patient safety in primary care

Science.gov (United States)

Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M

2015-01-01

ABSTRACT Background: There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. Objective: To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Methods: Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. Results: The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Conclusion: Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care. PMID:26339832

Cluster-based DBMS Management Tool with High-Availability