The book offers a comprehensive treatment of the subject, from air pollution monitoring and effects on human and animal health, on plants and materials, to pollution reduction measures, practical applications, and legal regulations. It intends to give the air pollution expert a basis for developing practicable solutions. Apart from the 'classic' pollutants, also radioactive air pollution is gone into. (DG) With 366 figs., 190 tabs
P Bhave, Prashant; Kulkarni, Nikhil
Air pollution in urban areas arises from multiple sources, which may vary with location and developmental activities. Anthropogenic activities as rampant industrialization, exploitation and over consumption of natural resources, ever growing population size are major contributors of air pollution. The presented review is an effort to discuss various aspects of air pollution and control legislation in India emphasizing on the history, present scenario, international treaties, gaps and drawbacks. The review also presents legislative controls with judicial response to certain landmark judgments related to air pollution. The down sides related to enforcement mechanism for the effective implementation of environmental laws for air pollution control have been highlighted.
There are a lot of reasons why emissions of air pollutants have to be reduced. Acid deposition and its consequences are among them, but they are not the only ones. This paper presents the comprehensive legal basis of air pollution control policy in Switzerland as well as the overall air pollution control strategy. The present situation with respect to air pollution is discussed. A list of implemented and planned measures is given as well as emission trends of major air pollutants from 1950 to 2010. 6 refs., 1 fig
HAO Jiming; HE Kebin; DUAN Lei; LI Junhua; WANG Litao
The rapid growth of China's economy has led to severe air pollution characterized by acid rain,severe pollution in cities,and regional air pollution.High concentrations are found for various pollutants such as sulfur dioxides(SO2),nitrogen oxides(NOx),and fine particulates.Great efforts have thus been undertaken for the control of air pollution in the country.This paper discusses the development and application of appropriate technologies for reducing the major pollutants produced by coal and vehicles,and investi gates air quality modeling as an important support for policy-making.
Wolverton, Billy C. (Inventor); Jarrell, Lamont (Inventor)
A bioaquatic air pollution control system for controlling both water and atmospheric pollution is disclosed. The pollution control system includes an exhaust for directing polluted gases out of a furnace and a fluid circulating system which circulates fluid, such as waste water, from a source, past the furnace where the fluid flow entrains the pollutants from the furnace. The combined fluid and pollutants are then directed through a rock/plant/microbial filtering system. A suction pump pumps the treated waste water from the filter system past the exhaust to again entrain more pollutants from the furnace where they are combined with the fluid (waste water) and directed to the filter system.
Full Text Available Indoor air quality (IAQ control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs of traditional Chinese medicine (TCM may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO2, carbon monoxide (CO, formaldehyde (HCHO, total volatile organic compounds (TVOCs, airborne particulate matter with a diameter of ≤10 µm (PM10 and ≤2.5 µm (PM2.5 during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy.
Lu, Chung-Yen; Kang, Sy-Yuan; Liu, Shu-Hui; Mai, Cheng-Wei; Tseng, Chao-Heng
Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO2), carbon monoxide (CO), formaldehyde (HCHO), total volatile organic compounds (TVOCs), airborne particulate matter with a diameter of ≤10 µm (PM10) and ≤2.5 µm (PM2.5) during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy. PMID:27331817
The Air Pollution Technology Branch (APTB) of NRMRL's Air Pollution Prevention and Control Division in Research Triangle Park, NC, has conducted several research projects for evaluating the use of artificial intelligence (AI) to improve the control of pollution control systems an...
Chung-Yen Lu; Sy-Yuan Kang; Shu-Hui Liu; Cheng-Wei Mai; Chao-Heng Tseng
Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstra...
Highlights: • Air pollution policies do not affect long-term climate targets. • Reduction of aerosols counteracts a fraction of the reduction of Kyoto forcing. • Air pollution policies may affect the rate of climate change in the short term. • There is no tradeoff between clean air and climate policies. - Abstract: In this paper we analyze the interaction between climate and air pollution policies using the integrated assessment model REMIND coupled to the reduced-form climate model MAGICC. Since overall, aerosols tend to cool the atmosphere, there is a concern that a reduction of pollutant emissions could accelerate global warming and offset the climate benefits of carbon dioxide emission reductions. We investigate scenarios which independently reduce emissions from either large-scale sources, such as power plants, or small-scale sources, such as cooking and heating stoves. Large-scale sources are likely to be easier to control, but their aerosol emissions are characterized by a relatively high sulfur content, which tends to result in atmospheric cooling. Pollution from small-scale sources, by contrast, is characterized by a high share of carbonaceous aerosol, which is an important contributor to global warming. We find that air pollution policies can significantly reduce aerosol emissions when no climate policies are in place. Stringent climate policies lead to a large reduction of fossil fuel use, and therefore result in a concurrent reduction of air pollutant emissions. These reductions partly reduce aerosol masking, thus initially counteracting the reduction of greenhouse gas forcing, however not overcompensating it. If climate policies are in place, air pollution policies have almost no impacts on medium- and long-term radiative forcing. Therefore there is no conflict of objectives between clean air and limiting global warming. We find that the stringency of air pollution policies may influence the rate of global temperature change in the first decade
The Air Pollution Technology Branch (APTB) of NRMRL's Air Pollution Prevention and Control Division produces and publishes highly specialized technical and scientific documents related to APTB's research. Areas of research covered include artificial intelligence, CFC destruction,...
Leutert, G. [Forests and Landscape, Berne (Switzerland). Federal Office of Environment
The legal basis of the Swiss air pollution control policy is set by the Federal Law on the Protection of the Environment, which came into force in 1985. It aims to protect human beings, animals and plants, their biological communities and habitats against harmful effects or nuisances and to maintain the fertility of the soil. The law is source-oriented (by emission standards) as well as effect-oriented (by ambient air quality standards). To link both elements a two-stage approach is applied. In the first stage preventive measures are taken at the emitting sources, irrespective of existing air pollution levels. Emissions have to be limited by early preventive measures as much as technical and operational conditions allow and as far as economically acceptable (prevention principle). By this, air pollution shall be kept as low as possible as a matter of principle, without the environment having to be in danger first. In a second stage the measures are strengthened or backed up by additional measures if ambient air quality standards laid down in the Ordinance on Air Pollution Control are exceeded. At this second stage, protection of man and his environment has priority over economic considerations. (author)
Jensen, Pernille Erland
Air pollution control (APC) residue from municipal solid waste incineration (MSWI) consists of the fly ash, and, in dry and semi-dry systems, also the reaction products from the flue gas cleaning process. APC residue is considered a hazardous waste due to its high alkalinity, high content of salts...
Environmental Protection Agency, Research Triangle Park, NC. Office of Manpower Development.
The Legal References: Air Pollution Control Regulations Manual is the last in a set of 21 manuals (AA 001 009-001 029) used in APEX (Air Pollution Exercise), a computerized college and professional level "real world" game simulation of a community with urban and rural problems, industrial activities, and air pollution difficulties. The manual…
The Department of Energy (DOE) plutonium production program Produced some of the greatest scientific and engineering accomplishments of all time. It is remarkable to consider the accomplishments of the Manhattan Project. The Reactor on the Hanford Site, the first production reactor in the world, began operation only 13 months after the start of construction. The DOE nuclear production program was also instrumental in pioneering other fields such as health physics an radiation monitoring. The safety record of these installations is remarkable considering that virtually every significant accomplishment was on the technological threshold of the time. One other area that the DOE Facilities pioneered was the control of radioactive particles and gases emitted to the atmosphere. The high efficiency particulate air filter (HEPA) was a development that provided high collection efficiencies of particulates to protect workers and the public. The halogen and noble gases also were of particular concern. Radioactive iodine is captured by adsorption on activated carbon or synthetic zeolites. Besides controlling radioncuclide air pollution, DOE facilities are concerned with other criteria pollutants and hazardous air pollutant emissions. The Hanford Site encompasses all those air pollution challenges
During fiscal year 1994, this author used the Bernard J. Steigerwald Opportunity for Independent Study, sponsored by US Environmental Protection Agency's Office of Air Quality Planning and Standards (Research Triangle Park, N.C.), to develop a group of quarterly indexes for adjusting or escalating air pollution control costs from one period to another. In all, nine indexes were developed, one equipment cost index (ECI) for each of nine control device categories. For convenience to the reader, additional indexes for two other equipment categories--available as part of the Producer Price Indexes compiled by the US Bureau of Labor Statistics--are also presented here. These 11 indexes--collectively known as the Vatavuk Air Pollution Control Cost Indexes (VAPCCI)--can be used to escalate costs from the initial (base) period (first quarter 1994) forward to any quarter in the future. To date, final indexes have been calculated (and are presented at the end of this article) for the second, third, and fourth quarters of 1994, and first quarter 1995; preliminary indexes are provided for second quarter 1995. Quarterly updates of these cost indexes will be computed as soon as the required input data become available. To date, no other set of cost indexes has been developed for such a wide array of pollution-control devices
... Air Pollution From Motor Vehicles AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule... Title 30 of the Texas Administrative Code (TAC), Chapter 114, Control of Air Pollution from...
Our central health cost estimate from particulate matter (PM) concentrations in larger Peruvian cities is approximately USD 790 million/year. More than 60 percent of these costs occur in Lima-Callao. Diesel vehicles are the most important emission source. Various abatement actions could yield health benefits of around USD 50 million in 2008 and USD 185 million after 2010. Some of the most important cost effective actions would be an inspection and maintenance (I&M) program for vehicles (planned to start in 2006) and introduction of low sulphur diesel (<50 ppm) from 2010. When low sulphur diesel is available, installing retrofit particle control technology on existing vehicles could be very cost effective. Some actions towards stationary sources could also be cost effective. In addition a mixture of several measures like tax incentives to promote use of gasoline cars at the expense of diesel cars, accelerated scrapping of old, polluting vehicles, ban on the use of some diesel vehicles and import restrictions on used cars could be chosen to yield short and long term air pollution benefits.
Air pollution is a mixture of solid particles and gases in the air. Car emissions, chemicals from factories, dust, ... a gas, is a major part of air pollution in cities. When ozone forms air pollution, it's ...
Air pollution is a mixture of solid particles and gases in the air. Car emissions, chemicals from factories, dust, pollen and ... Ozone, a gas, is a major part of air pollution in cities. When ozone forms air pollution, ...
Air pollution is a well known phenomenon experienced in every day life. The air we breathe consist of gases and aerosol particles on which pollutants such as toxic elements and bacteria reside. These microscopic particles are transported to long distances from the source of origin the direction and magnitude of which depends upon the prevailing meteorological conditions. In order to assess the impact of air pollution, systematic studies are carried out which consist of: 1) sampling of air, 2) measurement of pollutants, 3) identification of pollutant source and 4) adoption of control methods. Each of these topics are fairly exhaustive and their understanding requires accurate scientific approach. An overview of these topic has been presented in this talk. Air samples are best collected by filtering air through suitable medium and analyses are carried out by diverse analytical techniques. Source identifications is a very important step which is done either by emission modeling or receptor modeling techniques. A general survey of these techniques, especially receptor modeling is presented in this talk. The control of air pollution is carried out by using carried devices and the processes especially developed for this purpose. Air pollution has given rise to a number of global problems such as depletion of stratospheric ozone, acid rain and greenhouse effect, which are being tackled on international scale. These problems have been discussed very briefly and a summary of international efforts has been presented. (author)
The problem of optimal control of air pollution using weather forecastresults and numerical air pollution models is discussed. A mathematical formulation of the problem is presented. The control is an act on pollution sources with feasible constraints. Based on forecasted weather conditions, the objective ofthe optimal control is to minimize total cost caused by control under the constraint that the pollution concentrations over a certain period and a certain spatial domain are less than some specified values. Using the adjoint method, an effective algorithm is given. Since the optimal solutions are based on weather forecasts, the errors in weather forecasts will cause uncertainties in the optimal solutions. Estimation of impacts of weather forecast errors on the optimal solutions is discussed using the adjoint sensitivity analysis technique that is an approximated, however very effective method. The adjoint sensitivity analysis technique can be used to calculate the impacts of errors in wind, temperature and initial pollutant concentration fields on performances of the optimal control.
Australian cites experience a number of current and emerging air pollution problems. Concentrations of traditional primary pollutants such as CO, lead and dust have fallen in recent years as a consequence of air pollutant control measures, and the widespread introduction of lead-free petrol. However, recommended guidelines for ozone, the principal component of photochemical smog, are regularly exceeded in major capital cities in the summer months. In addition, it is predicted that extensive urban expansion will lead to much greater dependence on the motor vehicle as the primary means of transportation. Effects of air pollution are felt at a variety of scales. Traditionally, concerns about gaseous and particulate emissions from industrial and vehicular sources were focused on local impacts due to exposure to toxic species such as CO and lead. As noted above, concentrations of these pollutants have been reduced by a variety of control measures. Pollutants which have effects at a regional scale, such as photochemically-produced ozone, and acidic gases and particles have proved more difficult to reduce. In general, these pollutants arc not the result of direct emissions to atmosphere, but result from complex secondary processes driven by photochemical reactions of species such as NO2 and aldehydes. In addition, global effects of gaseous and particulate emissions to the atmosphere have received significant recent attention, concentrations of atmospheric CO2 with predicted impacts on global climate, and ozone depletion due to anthropogenic emissions of chlorine-containing chemicals are the two major examples. Combustion processes from petrol- and diesel-fuelled vehicles, make major contributions to air pollution, and the magnitude of this contribution is discussed in this article
... Pollution Control District and Feather River Air Quality Management District; Stationary Source Permits... County Air Pollution Control District (PCAPCD) and Feather River Air Quality Management District (FRAQMD... in a previous EPA rulemaking (76 FR 44809, July 27, 2011). DATES: Any comments must arrive by...
Hackney, J D; Linn, W S
In controlled clinical studies, volunteers are deliberately exposed to specific air pollutants under conditions simulating ambient exposures, and health-related responses are documented. Studies of the health risks of air pollution need to be scientifically rigorous and clearly relevant to "real-world" pollution exposures. Their results should be confirmed by independent replication if they are to be used as a basis for air quality regulations. Well-designed controlled clinical studies readil...
Lawther, P. J.
The human costs of air pollution are considerable in Jordan. According to a report published in 2000 by the World Bank under the Mediterranean Environmental Technical Assistance Program (METAP), approximately 600 people die prematurely each year in Jordan because of urban pollution. 50-90% of air pollution in Jordanian towns is caused by road traffic. Readings taken in 2007 by Jordanian researchers showed that levels of black carbon particles in the air were higher in urban areas (caused by v...
Jensen, Pernille Erland; Ferreira, Celia; Hansen, Henrik K.;
Air pollution control (APC) residue from municipal solid waste incineration (MSWI) is considered a hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist in different regions; however, most commercial...
This report presents some facts about how Canadian companies can work within the many innovative programs designed by the Canadian federal government to facilitate the export of Canadian products and services into the Argentine air pollution control market. As the economy stabilizes in Argentina, more effort is being given to issues of environmental protection and the Argentine government is increasing funding on environmental programs. The country is also strengthening its environmental legislation and increasing enforcement. The Kyoto and Montreal Protocols have brought attention to air quality issues such as climate change, emissions trading, and ozone depleting substances. Several initiatives currently focus on air quality monitoring and data collection since much information has to be gathered on air pollution levels. Emission control equipment for chemical, petrochemical, mining and power sectors are the best prospects for air pollution control, along with monitoring equipment, consulting services and fuel conversion equipment for vehicles and industrial plants. It was noted that there are legal and practical difficulties regarding new contract negotiations in Argentina, particularly with the decline in credit availability. This paper outlined the key factors shaping market growth. Most opportunities lies with projects funded by international financial institutions. The report includes a section on international competition, and the Canadian position for both private- and public-sector companies. A section on market logistics focused on issues such as direct sales, import regulations, and export credit risks. It is recommended that companies interested in the Argentine market contact the Embassy in Buenos Aires for information. refs., tabs
Indoor air pollution is typically associated with terms sick building syndrome, tight building syndrome, building related illness, and problem building. Indoor air pollution is a relatively new public health concern (approximately 15 years old) although this issue is an age-old problem dating back to prehistoric times when humans came to live indoors. This presentation summarizes indoor air quality issues in order to provide you with usable information concerning the recognition and evaluation of indoor air quality (IAQ) problems and the subsequent control measures which can be used for maintaining or improving the indoor air environment for better occupant health and comfort control. Why has the subject become so vocalized in the last fifteen years? Why the sudden interest and awareness concerning indoor air quality issues? During the last half of the 1970's and all of the 1980's, buildings were built or remodeled to minimize air handling, heating, and cooling costs, often limiting the amount of outside air brought into the buildings to near minimums. Paralleling these developments, complaints related to modern buildings increased. The new terms tight building syndrome, sick building syndrome, and indoor air quality became widely used by health and safety professionals and subsequently by newspaper columnist and the general public
Air quality is affected by many types of pollutants that are emitted from various sources, including stationary and mobile. These sources release both criteria and hazardous air pollutants, which cause health effects, ecological harm, and material damage. They are generally categ...
Contents of this study: air quality trends, monitoring, and modeling; air pollution research programs; development of national ambient air; quality standards; assessment and control of toxic air pollutants; status of air quality management programs; control of stationary source emissions; stationary source compliance; control of mobile source emissions; stratospheric ozone protection; indoor air quality; acid deposition; radon assessment and remediation; litigation
This book summarises the results of the ''Markal Study'', which is part of the scientific cooperation between the Indonesian and German governments. The nine chapters cover: an introduction to Indonesia and the objectives of the study; demographic and economic developments; fast increasing domestic energy use; pollution development on Jawa in the case of insufficient control; risks for ecosystems on Jawa; health risks from air pollution; pollution development and control cost in the case of reduced emissions, carbon dioxide emission analysis, and final recommendations for air quality management. A bibliography of the project reports on which the book is based as well as other sources is presented. (UK)
Quina, Margarida J.; Bordado, João C.M.; Quinta-Ferreira, Rosa M.
Municipal solid waste (MSW) remains a major problem in modern societies, even though the significant efforts to prevent, reduce, reuse and recycle. At present, municipal solid waste incineration (MSWI) in waste-to-energy (WtE) plants is one of the main management options in most of the developed countries. The technology for recovering energy from MSW has evolved over the years and now sophisticated air pollution control (APC) equipment insures that emissions comply with the st...
The collection of status reports has been prepared in order to provide a timely summary of selected EPA air pollution control activities to those individuals who are involved with the implementation of these programs. The report contains ozone/carbon monoxide (CO) programs; mobile sources programs; particulate matter nominally 10M and less (PM-10), sulfur dioxide (SO2) and lead programs; New Source Review (NSR); economics programs; emission standards programs; Indian activity programs; mobile sources programs; air toxics programs; acid rain programs; permits programs; chlorofluorocarbons programs; enforcement programs; and other programs
Jensen, Pernille Erland; Ferreira, Célia M. D.; Hansen, Henrik K.;
Air pollution control (APC) residue from municipal solid waste incineration is considered hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist, however most commercial solutions involve landfilling. A demand...... were made with raw residue, water-washed residue, acid washed residue and acid-treated residue with emphasis on reduction of heavy metal mobility. Main results indicate that the reactor successfully removes toxic elements lead, copper, cadmium and zinc from the feed stream, suggesting...
... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Clean Air-Water Pollution Control Acts...-Water Pollution Control Acts. Clean Air-Water Pollution Control Acts July 2002 If this cooperative... Violating Facilities” published pursuant to 40 CFR 15.20. By acceptance of a cooperative agreement in...
... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Air and water pollution control....45 Air and water pollution control requirements. The program must incorporate, by reference or otherwise, all requirements established by the Federal Water Pollution Control Act, as amended (Clean...
Air pollutants are the most dangerous type of pollution and they effect our environment the worst. The main air pollutants are CO/sub 2/, CO, NOx, SOx and particulate matter. These pollutants are causing some major environmental and health concerns. There are number of techniques to control these emissions to the atmosphere. The flue gas data of boilers and generators from ICI polyester industry is also included in this paper. The techniques in use to control the pollutants are discussed. One of the most common techniques is the switching of the fuel. The Natural gas emits almost 30 percent less carbon dioxide than oil, and just under 45 percent less carbon dioxide than coal. Emissions of particulates from natural gas combustion are 90 percent lower than from the combustion of oil, and 99 percent lower than burning coal. Natural gas emits virtually no sulfur dioxide, and upto 80 percent less nitrogen oxides than the combustion of coal. Similarly, use of compressed natural gas in vehicle reduces the amount of these emissions considerably. The other methods for the control and reduction of these emissions are combustion control techniques, Flue gas treatment and Fuel re-burning. NOx can be reduced considerably by combustion control techniques like Low excess air, staged air combustion, staged fuel combustion, external flue gas recirculation, Fuel induced recirculation and steam/water injection. The flue gas treatments like selective non-catalytic reduction (SNCR) and selective catalytic reduction (SCR) are also used for reduction of NOx. (author)
... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Addresses of State air pollution control agencies and EPA Regional Offices. 63.13 Section 63.13 Protection of Environment ENVIRONMENTAL... POLLUTANTS FOR SOURCE CATEGORIES General Provisions § 63.13 Addresses of State air pollution control...
... Pollution Control District and Feather River Air Quality Management District; Stationary Source Permits... EPA rulemaking (76 FR 44809, July 27, 2011). EPA is also making a technical amendment to the Code of... February 22, 2013 (78 FR 12267), EPA proposed a limited approval and limited disapproval of the...
... Facebook Twitter Google+ Pinterest Contact Us Hazardous Air Pollutants Hazardous air pollutants are those known to cause ... protect against adverse environmental effects. About Hazardous Air Pollutants What are hazardous air pollutants? Health and Environmental ...
Shahrabi, Narges Salehi; Pourezzat, Aliasghar; Fayaz-Bakhsh, Ahmad; Mafimoradi, Shiva; Poursafa, Parinaz
Background: Regarding the importance of air pollution issue for large cities, as Tehran metropolis, many plans, programs, projects and regulations have been developed to manage urban air pollution. However, most of them failed to decline the pollution. The purpose of this study is to pathologically analyze air-pollution control plans in order to offer effective solutions for Tehran metropolis. Methods: A qualitative content analysis and a semi-structured interview with 14 practicing professio...
Narges Salehi Shahrabi; Aliasghar Pourezzat; Fayaz-Bakhsh Ahmad; Shiva Mafimoradi; Parinaz Poursafa
Background: Regarding the importance of air pollution issue for large cities, as Tehran metropolis, many plans, programs, projects and regulations have been developed to manage urban air pollution. However, most of them failed to decline the pollution. The purpose of this study is to pathologically analyze air-pollution control plans in order to offer effective solutions for Tehran metropolis. Methods: A qualitative content analysis and a semi-structured interview with 14 practicing profe...
Conclusion: Application of local exhaust ventilation system and integrated collectors for control of air pollutants in rendering plant can remove large amounts of particulate and gaseous pollutants. Control of these pollutants can cause loss of smell nuisance and environmental pollution and improving the health and welfare of workers and neighboring residents of such industries.
There are two approaches for the protection of ambient air against the violation of the admissible threshold values and pollution impacts in large industrial regions. The first approach is the so-called "technological way". This approach leads to "green" technologies supporting the lowest level of a harmful pollutant emission. It would be the best solution for the FSU countries, but, unfortunately, this approach is difficult to implement. Many industrial enterprises in these countries ar...
Vaz, A. Ismael F.; Ferreira, E. C.
Environment issues are more than ever important in a modern society. Complying with stricter legal thresholds on pollution emissions raises an important economic issue. This paper presents some ideas in the use of optimization tools to help in the planning and control of stationary pollution sources. Three main semi-infinite programming approaches are described. The first consists in optimizing an objective function while the pollution level in a given region is kept bellow a ...
V V R Kishore Ch; Suman M
vehicles became important in human life. This air pollution mainly caused by vehicles and industries. This paper mainly concentrated on controlling the air pollution from vehicles by using semi-conductor gas sensor for detecting the emission level from vehicles. If the vehicle do not get service regularly, then pollution level higher than standard emission level. In this paper, smoke sensor has been used to detect carbon monoxide from vehicles. Smoke sensor senses the pollution level from veh...
... AGENCY 40 CFR Part 52 Revisions to the California State Implementation Plan, San Diego County Air Pollution Control District AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA is proposing to approve revisions to the San Diego Air Pollution Control District...
... AGENCY 40 CFR Part 52 Revisions to the California State Implementation Plan, Monterey Bay Unified Air Pollution Control District AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA is proposing to approve revisions to the Monterey Bay Unified Air Pollution Control...
In recent years, traditional forms of regulation have been combined with economic instruments in Swedish air pollution control policy. Major economic incentives are provided by the sulfur tax, the nitrogen oxides charge, and the environmental classification of diesel fuels. Both economic instruments and administrative regulations have played a part in reducing emissions, but the new economic instruments must be considered to have been the major driving force behind the reductions. The average sulfur content of heavy fuel oil has decreased to approximately 0.4% while that of almost all gas oil is now less than 0.1%. Total nitrogen oxides emissions from boilers liable to the nitrogen oxides charge have decreased by about 40%. The tax on diesel fuels is differentiated to stimulate the use of environmentally better grades of fuel, which are taxes at a lower rate than the standard grade. As a result, diesel fuels with better specifications than the standard grade have captured a large fraction - about 75% - if diesel sales in only a few years. 12 refs., 5 tabs
Boubel, R.W.; Fox, D.L.; Turner, D.B.; Stern, A.C.
This book presents an overview of air pollution. In Part I, the history of air pollution and the basic concepts involved with air pollution such as sources, scales, definitions are covered. Part II describes how airborne pollutants damage materials, vegetation, animals, and humans. Six fundamental aspects of air pollution are included in the text: The Elements of Air Pollution; The Effects of Air Pollution; Measurement and Monitoring of Air Pollution; Meterology of Air Pollution; regulatory Control of Air Pollution; and Engineering Control of Air Pollution.
Baumueller, J.; Reuter, U. [Office of Environmental Protection, Stuttgart (Germany). Dept. for Climatology
The immense increase of motor traffic, in the future reinforced by the European market and the opening of boarders to the east countries, requires new efforts in traffic policy. In the city agglomerations the motor traffic is nearly collapsing. The increase of motor traffic is the reason for a considerable degradation of environment, especially by noise and air pollution. For the region of Stuttgart the problems and possibilities of counter-measures are discussed. (author)
Under the first international agreement adopted to combat transboundary air pollution (the 1979 Geneva Convention), the Goteborg Protocol was signed on 1 December 1999. It heralds a new approach in implementing the European strategy. The new Protocol is based on a multi-pollutant/ multi-effect approach, taking into account the interconnected nature of the three issues of acidification, eutrophication and the formation of tropospheric (ground-level) ozone. It aims to achieve, at the least cost, a significant reduction in emissions of the pollutants that cause these phenomena. France is one of the first countries to become involved in this effort. Although emissions of the pollutants in France are among the lowest in Europe, France will nevertheless have to halve her SO2 and NOx emissions in the next 10 years at an annual cost of Euros 9 billion. International negotiations on transboundary pollution issues are based on policy-makers decisions and estimates produced through scientific modelling. However, when interpreting the results, the fundamental question arises as to how the efforts required are to be divided among the countries that are Party to the Protocol, and to how acceptable the corresponding costs are to the market. (author)
Barker, K.; And Others
Pollution of the general environment, which exposes an entire population group for an indeterminate period of time, certainly constitutes a problem in public health. Serious aid pollution episodes have resulted in increased mortality and a possible relationship between chronic exposure to a polluted atmosphere and certain diseases has been…
... Valley Unified Air Pollution Control District (SJVUAPCD) portion of the California State Implementation......... 12/17/92 08/24/07 On September 17, 2007, the submittal for San Joaquin Valley Unified Air Pollution... December 13, 1994 (59 FR 64132), EPA approved into the SIP a previous version of Rule 4402, SJVUAPCD...
... 45 Public Welfare 4 2010-10-01 2010-10-01 false Clean Air Act and the Federal Water Pollution... Water Pollution Control Act. Contracts and subgrants of amounts in excess of $100,000 shall contain a... regulations issued pursuant to the Clean Air Act (42 U.S.C. 7401 et seq.) and the Federal Water...
... Students to Environmental Health Information Menu Home Air Pollution Air Pollution Home Indoor Air Pollution Outdoor Air Pollution ... Pollution Indoor Air Pollution Print this Page Air Pollution Air Pollution Home Indoor Air Pollution Outdoor Air Pollution ...
Indoor air pollution is a potential risk to human health. Prolonged exposure to indoor pollutants may cause various infectious, allergic and other diseases. Indoor pollutants can emanate from a broad array of internal and external sources. Internal sources include building and furnishing materials, consumer and commercial products, office equipment, micro-organisms, pesticides and human occupants activities. External sources include soil, water supplies and outside makeup air. The main indoor air pollutants of concern are inorganic gases, formaldehyde and other volatile organic compounds, pesticides, radon and its daughters, particulates and microbes. The magnitude of human exposure to indoor pollutants can be estimated or predicted with the help of mathematical models which have been developed using the data from source emission testing and field monitoring of pollutants. In order to minimize human exposure to indoor pollutants, many countries have formulated guidelines / standards for the maximum permissible levels of main pollutants. Acceptable indoor air quality can be achieved by controlling indoor pollution sources and by effective ventilation system for removal of indoor pollutants. (author)
Although official efforts to control air pollution have traditionally focused on outdoor air, it is now apparent that elevated contaminant concentrations are common inside some private and public buildings. Concerns about potential public health problems due to indoor air pollution are based on evidence that urban residents typically spend more than 90 percent of their time indoors, concentrations of some contaminants are higher indoors than outdoors, and for some pollutants personal exposures are not characterized adequately by outdoor measurements. Among the more important indoor contaminants associated with health or irritation effects are passive tobacco smoke, radon decay products, carbon monoxide, nitrogen dioxide, formaldehyde, asbestos fibers, microorganisms and aeroallergens. Efforts to assess health risks associated with indoor air pollution are limited by insufficient information about the number of people exposed, the pattern and severity of exposures, and the health consequences of exposures. An overall strategy should be developed to investigate indoor exposures, health effects, control options, and public policy alternatives
Begum, Bilkis A.; Biswas, Swapan K.; Hopke, Philip K.
Particulate matter (PM) sampling for both coarse and fine fractions was conducted in a semi-residential site (AECD) in Dhaka from February 2005 to December 2006. The samples were analyzed for mass, black carbon (BC), and elemental compositions. The resulting data set were analyzed for sources by Positive Matrix Factorization (EPA-PMF). From previous studies, it is found that, the air quality became worse in the dry winter period compared to the rainy season because of higher particulate matter concentration in the ambient air. Therefore, seasonal source contributions were determined from seasonally segregated data using EPA-PMF modeling so that further policy interventions can be undertaken to improve air quality. From the source apportionment results, it is observed that vehicular emissions and emission from brick kiln are the major contributors to air pollution in Dhaka especially in the dry seasons, while contribution from emissions from metal smelters increases during rainy seasons. The Government of Bangladesh is considering different interventions to reduce the emissions from those sources by adopting conversion of diesel/petrol vehicles to CNG, increasing traffic speed in the city and by introducing green technologies for brick production. However, in order to reduce the transboundary effect it is necessary to take action regionally.
Narges Salehi Shahrabi
Full Text Available Background: Regarding the importance of air pollution issue for large cities, as Tehran metropolis, many plans, programs, projects and regulations have been developed to manage urban air pollution. However, most of them failed to decline the pollution. The purpose of this study is to pathologically analyze air-pollution control plans in order to offer effective solutions for Tehran metropolis. Methods: A qualitative content analysis and a semi-structured interview with 14 practicing professionals were used to identify key causes and sources of Tehran′s air pollution, to recognize challenges and obstacles towards effective performance of air-pollution control plans in this metropolitan area, and to suggest the most effective controlling solutions. Results: Challenges related to air-pollution control plans can be divided into two major categories: Firstly lack of integrated and organized stewardship and secondly those related to political, economical, social and technical environmental abbreviated as PEST, challenges. For effective control of the Tehran air pollution, the following eight controlling alternatives were identified: Systematization of plan preparation process, organizing the stewardship, standardization and utilization of new technologies and professional experts, cultural and infrastructural development, realization of social justice, developing coordination and controlling mechanisms, improving citizen′s participatory capacity, and focusing on effective management of fuel and energy. Conclusions: Controlling air pollution in Tehran should be considered as a priority for policymakers to make enforcements through applying a systemic cycle of preparation effective and comprehensive plans. Further, implement the enforcements and evaluate the environmental impact of the plans through involving all stakeholders.
... AGENCY Air Pollution Control: Proposed Actions on Clean Air Act Section 105 Grant to the Lane Regional... Lane Regional Air Protection Agency (LRAPA) in Eugene, Oregon is a result of agency wide non-selective...-selective reduction on September 30, 2011. In consideration of legislative history, the guidance...
Full Text Available The most important environmental pollutant in steel industry is air pollution due to the process of its products. Optimise sitting for this industry, in a great extend will prevent pollutants and emissions. Khorasan Steel Company is located near some populous villages and three rivers. It is necessary to perform an investigation for providing abatement and control of air pollution, in time of planning and manufacturing of control instruments. The manufacturing company has determined air pollution reduction instruments in this site, according to the emission suspended particulate and its climatic conditions. The air pollution reducer's instruments were used back-fither. But, this offer was not agreed by the Department of the Environment of Iran. Perhaps, this disagreement was announced just for another original problem, which was the site selection of plants. This research was on the filtration which has been offered by the manufacturing company, if this selection can improve the future regional air pollution. These figures, of course, were obtained from the present data and plume rise particulate, considering Gausian distribution mode for all the rural population and rivers rounding to the site, up to 5 km. The results showed that the produced particulates were less than permissible limit and the proposed methods will improve the complex air pollution difficulties So, the proposed methods were provided for increasing the control and operating the system for conducting of cyclone before input of particulate to the back-filter.
The nature of chemical, biological and physical contaminants present in indoor air, their sources, and the health effects they cause are reviewed. Among the physical agents, the interaction between tobacco smoke and radon is discussed. Control and improvement of indoor air quality can be achieved combining the use of two main strategies: proper design and construction of buildings, and control of indoor air pollution through source control, ventilation, air cleaning, exposure control, or a combination of them. A number of control measures primarily targeted to pollutants other than radon can also be particularly effective for radon. On the other hand, measures primarily targeted to radon containment can also be beneficial for other pollutants. Effective programmes on indoor air improvement are urgently needed to benefit the health, comfort and productivity of our communities. (author)
Chiara Ravetti; Yana Popp Jin; Mu Quan; Zhang Shiqiu; Timothy Swanson
This paper looks at the problem of information control behind the unsustainable levels of air pollution in China. In particular, it focuses on a large urban area, Beijing, and it examines the role of the public, government-controlled information and the adaptation choices of households in response to signals about high pollution. Our analysis is based on a simple theoretical framework in which people migrate from rural areas to polluted cities, receiving a signal from the government about urb...
We usually think of air pollution as being outdoors, but the air in your house or office could also be polluted. Sources of indoor pollution include Mold and pollen Tobacco smoke Household products ...
... covered calcium carbide furnaces with wet air pollution control devices subcategory. 424.40 Section 424.40... FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Calcium Carbide Furnaces With Wet Air Pollution... with wet air pollution control devices subcategory. The provisions of this subpart are applicable...
... to a close in June 2013 when the company, Conscious Clothing, was awarded the My Air grand ... Page Options: Request Translation Services Facebook Twitter LinkedIn Google+ Reddit Email Evernote More Increase Font Size Decrease ...
F. Wagner; Schoepp, W.
This paper compares cost curves of SO2, NOx and PM2.5 emission controls generated with the RAINS (Regional Air Pollution Information and Simulation) model with cost estimates obtained from the GAINS (Greenhouse Gas - Air Pollution Interactions and Synergies) model. Based on the same set of input data, results from both models are very similar, and differences are considered as insignificant.
The total quantity control of pollutant emissions for an industrial district is determined by coefficient (A) method (Qian, 1990). It is suggested that average daily concentrations of air pollutants should be estimated in relation with metrological parameters, such as wind directions, wind speed and atmospheric stability in the period of monitoring by Gaussian model (SEPB, 1991), and that the sources of pollution should be redistributed on the basis of the result of monitoring with a view improving local atmosphere environment.
Facing the increasing environmental degradation locally and globally, the Chinese government sets mandatory goals of 10% reduction of SO2 emission and 20% reduction of energy intensity in its 11th Five-Year Plan period (FYP, 2006-2010). This study uses Shanxi Province to show the health effects of air pollution and health benefits resulting from various air pollution control scenarios in Shanxi province, illustrate how policies and measures have been implemented in practice in the province as...
National Air Pollution Control Administration (DHEW), Washington, DC.
Described is the Federal air pollution program as it was in 1967. The booklet is divided into these major topics: History of the Federal Program; Research; Assistance to State and Local Governments; Abatement and Prevention of Air Pollution; Control of Motor Vehicle Pollution; Information and Education; and Conclusion. Federal legislation has…
Haapaniemi, J. [Turku Univ. (Finland). Dept. of Political Science
The aim of this research is to show how the general wording of the Air Pollution Control Act which came into force in 1982 has been given practical meanings. The main interest is the administrational implementation of the aims of the air pollution legislation for regulation of industrial activities and the energy sector. The article focuses on the decisions and the decision-making process through the Air Pollution Control Act with its relatively flexible norms. It gives a view of air pollution control practices and its problems, especially concerning sulphur emissions of whose control there is already lot of experiences. The grounds for resolutions given according to the Air Pollution Control Act and the possibility of public participation in their making are the centre of attention here. The greatest interest is cases on the decisions made by applying general governmental decisions, especially regulations concerning coal-fired power plants, and the regulations for sulphur dioxide emissions, in the governmental decision of 1987. (author)
Xiao, Te; Xu, Jingyao
This paper mainly deals with the promotion of fuel cell vehicles in Chinese typically polluted city－Beijing. In order to implement the project successfully, two major motivators, from the respective aspect of the fuel cell technical characteristics as well as the Beijing current pollution, were accordingly studied and analyzed in the first four chapters. Subsequently, the authors deepened the understanding of the Chinese development environment towards fuel cell vehicles in the fifth chapter....
Public Health Service (DHEW), Rockville, MD.
This catalog lists the universities, both supported and not supported by the Division of Air Pollution, which offer graduate programs in the field of air pollution. The catalog briefly describes the programs and their entrance requirements, the requirements, qualifications and terms of special fellowships offered by the Division of Air Pollution.…
We usually think of air pollution as being outdoors, but the air in your house or office could also be polluted. Sources of indoor pollution ... is known as sick building syndrome. Usually indoor air quality problems only cause discomfort. Most people feel ...
Estrada, José M; Bernal, Oscar I; Flickinger, Michael C; Muñoz, Raúl; Deshusses, Marc A
Although biofilm-based biotechnologies exhibit a large potential as solutions for off-gas treatment, the high water content of biofilms often causes pollutant mass transfer limitations, which ultimately limit their widespread application. The present study reports on the proof of concept of the applicability of bioactive latex coatings for air pollution control. Toluene vapors served as a model volatile organic compound (VOC). The results showed that Pseudomonas putida F1 cells could be successfully entrapped in nanoporous latex coatings while preserving their toluene degradation activity. Bioactive latex coatings exhibited toluene specific biodegradation rates 10 times higher than agarose-based biofilms, because the thin coatings were less subject to diffusional mass transfer limitations. Drying and pollutant starvation were identified as key factors inducing a gradual deterioration of the biodegradation capacity in these innovative coatings. This study constitutes the first application of bioactive latex coatings for VOC abatement. These coatings could become promising means for air pollution control. PMID:25115963
The solution of applications for air pollution control in foundries for iron and non-ferrous metals may not only be understood as theobservance of requested emission limit values at the stack outlet. An effective environmental protection already starts with the greatest possible capture of pollutants at the source with at the same time minimisation of the volume flow necessary for this. Independent of this, the downstream installed filtration system has to realise a degree of separation of de...
J. C. Gong; Zhu, T.; M. Hu; L. W. Zhang; Cheng, H.; L. Zhang; Tong, J; Zhang, J.
Aldehydes are ubiquitous constituents of the atmosphere. Their concentrations are elevated in polluted urban atmospheres. The present study was carried out to characterize three aldehydes of most health concern (formaldehyde, acetaldehyde, and acrolein) in a central Beijing site in the summer and early fall of 2008 (from June to October). Measurements were made before, during, and after the Beijing Olympics to examine whether the air pollution control measures implemented to improve Beijing's...
... Pollution Control Act. Pursuant to regulations of the Environmental Protection Agency (40 CFR part 15) implementing requirements with respect to the Clean Air Act and the Federal Water Pollution Control Act are... Water Pollution Control Act. 633.211 Section 633.211 Highways FEDERAL HIGHWAY ADMINISTRATION,...
Air pollution is as much a product of our society as it is one of chemistry and meteorology. Social variables such as gender, age, health status and poverty are often linked with our exposure to air pollutants. Pollution can also affect our behaviour, while regulations to improve the environment can often challenge of freedom.
Lavaroni, Charles W.; O'Donnell, Patrick A.
One of three in a series about pollution, this teacher's guide for a unit on air pollution is designed for use in junior high school grades. It offers suggestions for extending the information and activities contained in the textual material for students. Chapter 1 discusses the problem of air pollution and involves students in processes of…
HONGYAN－FENG; LIUFAN; 等
The total quantity control of pollutant emissions for an industrial district is determined by coefficient(A) method(Qian,1990).It is suggested that average daily concentrations of air pollutants should be estimated in relation with metrological parameters,such as wind directions,wind speed and atmospheric stability in the period of moniforing by Gaussian model(SEPB,1991),and that the sources of Pollution should be redistributed on the basis of the resulf of monitoring with a view improving local atmosphere environment.
Hernandez, Rodolfo Andres
China’s air pollution has reached a critical state, and is characterized by heavy coal smoke and a wide presence of ozone and particulate matter (PM2.5). From 2011, through the 12th five year plan, the prevention and control of air pollution entered a new ‘transition stage’ guided by the principles of sustainability and energy conservation, and also intensified by pressure from the society. This article is divided into two parts: first, it introduces the most important changes, problems and a...
Cochet, C.; Fernandes, E.O.; Jantunen, M.;
ECA-IAQ (European Collaborative Action, Urban Air, Indoor Environment and Human Exposure), 2006. Strategies to determine and control the contributions of indoor air pollution to total inhalation exposure (STRATEX), Report No 25. EUR 22503 EN. Luxembourg: Office for Official Publications of the Eu...... strategies described should be considered as a framework. This framework may have to be adapted to specific situations by policy makers, risk assessors, and risk managers....
Fu, Joshua S.; Zhuang, Guoshun; Zhou, Ying; Levy, Jonathan Ian
Background: The Yangtze River Delta (YRD) in China is a densely populated region with recent dramatic increases in energy consumption and atmospheric emissions. Objectives: We studied how different emission sectors influence population exposures and the corresponding health risks, to inform air pollution control strategy design. Methods: We applied the Community Multiscale Air Quality (CMAQ) Modeling System to model the marginal contribution to baseline concentrations from different sectors. ...
Guan, Zhenzhen; Chen, Dezhen; Astrup, Thomas Fruergaard
Application of selective non-catalytic reduction systems at municipal solid waste incinerators (MSWIs) often involves over-stoichiometric injection of ammonia into flue gases. Un-reacted ammonia may be deposited on fly ash particles and can ultimately influence the leaching behaviour of air-pollution-control...
In this article emission reduction is considered as an option for air pollution control for coal-fired power generation. The few projects selected in this article have shown that detailed site-specific assessments are necessary to find the most cost-effective solution
Astrup, Thomas; Mosbæk, Hans; Christensen, Thomas Højlund
Assessment of long-term leaching from MSWI air-pollution-control (APC) residues is discussed with respect to use in environmental impact assessment, such as life-cycle assessment (LCA). A method was proposed for estimating leaching as a function of the liquid-to-solid (L/S) ratio in a long...
...: EPA is taking direct final action to approve revisions to the San Diego County Air Pollution Control... earlier version of Rule 2 into the SIP on February 3, 2000 (65 FR 5262). C. What is the purpose of the... Federalism (64 FR 43255, August 10, 1999) revokes and replaces Executive Orders 12612 (Federalism) and...
Weisburd, Melvin I.
The Field Operations and Enforcement Manual for Air Pollution Control, Volume III, explains in detail the following: inspection procedures for specific sources, kraft pulp mills, animal rendering, steel mill furnaces, coking operations, petroleum refineries, chemical plants, non-ferrous smelting and refining, foundries, cement plants, aluminum…
Astrup, Thomas; Dijkstra, J.J.; Comans, R.N.J.; van der Sloot, H.; Christensen, Thomas Højlund
This paper provides an improved understanding of the leaching behavior of waste incineration air-pollution-control (APC) residues in a long-term perspective. Leaching was investigated by a series of batch experiments reflecting leaching conditions after initial washout of highly soluble salts from...
...EPA is finalizing a limited approval and limited disapproval of revisions to the San Joaquin Valley Air Pollution Control District (SJVAPCD) portion of the California State Implementation Plan (SIP). This action was proposed in the Federal Register on July 14, 2009 and concerns volatile organic compounds (VOCs) from confined animal facilities, such as dairies, cattle feedlots, and poultry and......
Direct measurement of arsenic release requires a good sampling and analysis procedure in order to capture and detect the total amount of metals emitted. The literature is extensively reviewed in order to evaluate the efficiency of full field-scale and laboratory scale techniques for capturing particulate and gaseous emissions of arsenic from the thermo-chemical treatment of different sources of arsenic. Furthermore, trace arsenic concentrations in ambient air, national standard sampling methods and arsenic analysis methods are considered. Besides sampling techniques, the use of sorbents is also reviewed with respect to both approaches (1) to prevent the metals from exiting with the flue gas and (2) to react or combine with the metals in order to be collected in air pollution control systems. The most important conclusion is that submicron arsenic fumes are difficult to control in conventional air pollution control devices. Complete capture of the arsenic species requires a combination of particle control and vapour control devices. - Submicron arsenic fumes are difficult to control in conventional air pollution control devices
Richman, Barbara T., Ed.
Reports findings of the Global Environment Monitoring System study concerning air pollution in the world's megacities. Discusses sources of air pollution, air pollution impacts, air quality monitoring, air quality trends, and control strategies. Provides profiles of the problem in Beijing, Los Angeles, Mexico City, India, Cairo, Sao Paulo, and…
LIU Gang-jun; FU Er-jiang; WANG Yun-jia; ZHANG Ke-fei; HAN Bao-ping; ARROWSMITH Colin
More effective environmental pollution control and management are needed due to the increasing environmental impacts from a range of human activities and the growing public demands for a better living environment. Urban air pollution is a serious environmental issue that poses adverse impacts on the health of people and the environment in most metropolitan areas. In this paper, we propose a geoinformatics augmented framework of environmental modelling and information sharing for supporting effective urban air pollution control and management. This framework is outlined in terms of its key components and processes including: 1) an integrated, adaptive network of sensors for environmental monitoring; 2) a set of distributed, interoperable databases for data management; 3) a set of intelligent, robust algorithms and models for environmental modelling; 4) a set of flexible, efficient user interfaces for data access and information sharing; and 5) a reliable, high capacity, high performance computing and communication infrastructure for integrating and supporting other framework components and processes.
The volume treats an issue from the boundary zone between environmental law and environmental economics, namely the regionalization of air pollution control standards in installation-related emission control law. In order to examine the question of whether this proposal, which originates in the field of environmental economics, can be adopted and is purposeful, the author initially performs a complete inventorization of applicable norms, this covering emission control law, the law of regional planning, and the provisions of international law. This status quo is then reviewed using conformity and optimization criteria developed by the political sciences. The assessment comes to the conclusion that the introduction of regionally differentiated air pollution control standards is not desirable. The author further submits proposals for the streamlining of the law of installation-related air pollution control in the Federal Republic of Germany. (orig.)
Narges Salehi Shahrabi; Aliasghar Pourezzat; Hossein Mobaraki; Shiva Mafimoradi
Abstract Background The centralization of human activities is associated with different pollutants which enter into environment easily and cause the urban environment more vulnerable. Regarding the importance of air pollution issue for Tehran metropolis, many plans and regulations have been developed. However, most of them failed to decline the pollution. The purpose of this study was to pathologically analyze air-pollution control plans to offer effective solutions for Tehran metropolis. Met...
This report is intended as a training cum reference document for scientists posted at the Environmental Laboratories at the Nuclear Power Station Sites and other sites of the Department of Atomic Energy with installations emitting air pollutants, radioactive or otherwise. Since a manual already exists for the computation of doses from radioactive air pollutants, a general approach is take here i.e. air pollutants in general are considered. The first chapter presents a brief introduction to the need and scope of air pollution dispersion modelling. The second chapter is a very important chapter discussing the aspects of meteorology relevant to air pollution and dispersion modelling. This chapter is important because without this information one really does not understand the phenomena affecting dispersion, the scope and applicability of various models or their limitations under various weather and site conditions. The third chapter discusses the air pollution models in detail. These models are applicable to distances of a few tens of kilometres. The fourth chapter discusses the various aspects of meteorological measurements relevant to air pollution. The chapters are followed by two appendices. Apendix A discusses the reliability of air pollution estimates. Apendix B gives some practical examples relevant to general air pollution. It is hoped that the document will prove very useful to the users. (author)
This tenth volume of the series of Air Pollution Studies, published under the auspices of the Executive Body for the Convention on Long-range Transboundary Air Pollution, contains the documents reviewed and approved for publication at the eleventh session of the Executive Body held at Geneva from 1 to 3 December 1993. Part One is the Annual Review of Strategies and Policies for Air Pollution Abatement. National emission data and forecasts for sulphur dioxide (SO2), nitrogen oxides (NOx), volatile organic compounds (VOCs), ammonia (NH3) and carbon dioxide (CO2) from 1980 to 2005 are presented. Conclusions are drawn concerning the status of implementation of the sulphur and nitrogen oxides protocols on the basis of these data. Part Two is an executive summary of the 1992 Report on the Forest Condition in Europe. The main objective of this report is to give a condensed description of the condition of forests in Europe, as it has been assessed by the transnational and national annual surveys, carried out jointly by the ECE under the Convention on Long-range Transboundary Air Pollution and by the European Community (EC). Part Three is a summary report that focuses on the reduction of air pollution from heat and electric energy production. It is based on discussion papers submitted to the fifth ECE Seminar on Emission Control Technology for Stationary Sources, held in Nuremberg (Germany) from 10 to 14 June 1991. This chapter presents the main control techniques to reduce emissions from fuel combustion, which is a major contribution in most ECE countries to air pollution by sulphur and nitrogen compounds, carbon oxides, organic compounds, as well as heavy metals. Three principal abatement options are reviewed: fuel cleaning and fuel conversion, low-emission combustion processes, and flue gas cleaning processes. Both technical and economic aspects of the different measures are discussed
... AGENCY 40 CFR Part 80 RIN 2060-AQ86 Control of Air Pollution From Motor Vehicles: Tier 3 Motor Vehicle... hearings to be held for the proposed rule ``Control of Air Pollution from Motor Vehicles: Tier 3 Motor... cars, light-duty trucks, medium- duty passenger vehicles, and some heavy-duty vehicles. This...
One of the primary topics of concern to those planning, developing, and operating waste-to-energy (W-T-E) [also known as municipal waste combustors (MWCs)] facilities is air emissions. This paper presents a description of the state-of-the-art air pollution control (APC) systems and technology for particulate, heavy metals, organics, and acid gases control for W-T-E facilities. Items covered include regulations, guidelines, and control techniques as applied in the W-T-E industry. Available APC technologies are viewed in detail on the basis of their potential removal efficiencies, design considerations, operations, and maintenance costs
Watt, Lewis C.; Cannon, Fred S.; Heinsohn, Robert J.; Spaeder, Timothy A.
This paper describes a Strategic Environmental Research and Development Program (SERDP) funded project led jointly by the Marine Corps Multi-Commodity Maintenance Centers, and the Air and Energy Engineering Research Laboratory (AEERL) of the USEPA. The research focuses on paint booth exhaust minimization using recirculation, and on volatile organic compound (VOC) oxidation by the modules of a hybrid air pollution control system. The research team is applying bench, pilot and full scale systems to accomplish the goals of reduced cost and improved effectiveness of air treatment systems for paint booth exhaust.
Ross, R. D., Ed.
This book is an authoritative reference and practical guide designed to help the plant engineer identify and solve industrial air pollution problems in order to be able to meet current air pollution regulations. Prepared under the editorial supervision of an experienced chemical engineer, with each chapter contributed by an expert in his field,…
Lin, Hualiang; Zhang, Yonghui; Liu, Tao; Xiao, Jianpeng; Xu, Yanjun; Xu, Xiaojun; Qian, Zhenmin; Tong, Shilu; Luo, Yuan; Zeng, Weilin; Ma, Wenjun
Though increased particulate air pollution has been consistently associated with elevated mortality, evidence regarding whether diminished particulate air pollution would lead to mortality reduction is limited. Citywide air pollution mitigation program during the 2010 Asian Games in Guangzhou, China, provided such an opportunity. Daily mortality from non-accidental, cardiovascular and respiratory diseases was compared for 51 intervention days (November 1-December 21) in 2010 with the same calendar date of baseline years (2006-2009 and 2011). Relative risk (RR) and 95% confidence interval (95% CI) were estimated using a time series Poisson model, adjusting for day of week, public holidays, daily mean temperature and relative humidity. Daily PM10 (particle with aerodynamic diameter less than 10 μm) decreased from 88.64 μg/m3 during the baseline period to 80.61 μg/m3 during the Asian Games period. Other measured air pollutants and weather variables did not differ substantially. Daily mortality from non-accidental, cardiovascular and respiratory diseases decreased from 32, 11 and 6 during the baseline period to 25, 8 and 5 during the Games period, the corresponding RR for the Games period compared with the baseline period was 0.79 (95% CI: 0.73-0.86), 0.77 (95% CI: 0.66-0.89) and 0.68 (95% CI: 0.57-0.80), respectively. No significant decreases were observed in other months of 2010 in Guangzhou and intervention period in two control cities. This finding supports the efforts to reduce air pollution and improve public health through transportation restriction and industrial emission control.
A report on air quality and contribution of individual sources on its pollution in the Slovak Republic in 2003 is presented. This report consists of two parts: (1) Pollutants part and (2) Emission part. Pollutants part is divided into the following chapters: Regional air pollution and quality of of precipitation; Local air pollution; Atmospheric ozone. Emission part is divided into the following chapters: Inventory control of emissions and sources of pollution, Emission of greenhouse gases
A report on air quality and contribution of individual sources on its pollution in the Slovak Republic in 2004 is presented. This report consists of two parts: (1) Pollutants part and (2) Emission part. Pollutants part is divided into the following chapters: Regional air pollution and quality of precipitation; Local air pollution; Atmospheric ozone. Emission part is divided into the following chapters: Inventory control of emissions and sources of pollution, Emission of greenhouse gases
... air pollution How to protect yourself from air pollution Chemicals Noise Quizzes Links to more information girlshealth glossary girlshealth.gov home http://www.girlshealth.gov/ Home The environment and your health Air Health effects of air pollution ... Health effects of air pollution Breathing air that ...
Magro, Cátia Joana Costa
Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais Air pollution control (APC) residues from municipal solid waste incineration are classified as hazardous waste and disposed of, although it contains potential resources. Due to the different fuel gas cleaning system designs (wet or semi-dry), the APC residues present distinct chemical and physical characteristics that influence the remediation success and their possible reuse. ...
Quina, Margarida J.; Santos, Regina C.; Bordado, João C.; Quinta-Ferreira, Rosa M.
This study is mainly related with the physical and chemical characterization of a solid waste, produced in a municipal solid waste (MSW) incineration process, which is usually referred as air pollution control (APC) residue. The moisture content, loss on ignition (LOI), particle size distribution, density, porosity, specific surface area and morphology were the physical properties addressed here. At the chemical level, total elemental content (TC), total availability (TA) and the leaching beh...
1.Clean air is important to good health.If the aircontains impurities,they may be absorbed by ourbodies and make us ill.We need clean air,butunfortunately,air pollution is generally present,especially in cities. 2.Our cities have many factories,which we need tomake food products,clothing and many other things.
This manual is provided for the guidance of those persons or authorities who are responsible for the organization, control and operation of ventilation systems and air-cleaning installations in nuclear establishments. It is intended to generalize about existing experience in the operation of such systems at nuclear facilities including reactors and laboratories for production, use and handling of radionuclides and other toxic materials. This manual will provide designers and operators of nuclear facilities in which ventilation and air-cleaning systems are used with the factors which have to be considered to create safe working conditions inside facilities and without polluting the atmosphere or the environment to a hazardous level.
Narges Salehi Shahrabi
Full Text Available The centralization of human activities is associated with different pollutants which enter into environment easily and cause the urban environment more vulnerable. Regarding the importance of air pollution issue for Tehran metropolis, many plans and regulations have been developed. However, most of them failed to decline the pollution. The purpose of this study was to pathologically analyze air-pollution control plans to offer effective solutions for Tehran metropolis.A Qualitative content analysis in addition to a semi-structured interview with 14 practicing professional were used to identify 1 key sources of Tehran's air pollution, 2 recognize challenges towards effective performance of pertinent plans and 3, offer effective solutions.Related challenges to air-pollution control plans can be divided into two major categories including lack of integrated and organized stewardship and PEST challenges.For controlling the air pollution of Tehran effectively, various controlling alternatives were identified as systematization of plan preparation process, standardization and utilization of new technologies & experts, infrastructural development, realization of social justice, developing coordination mechanisms, improving citizens' participatory capacity and focusing on effective management of fuel and energy. Controlling air pollution in Tehran needs a serious attention of policymakers to make enforcements through applying a systemic cycle of preparation comprehensive plans. Further, implement the enforcements and evaluate the environmental impact of the plans through involving all stakeholders.
All WtE (waste-to-energy) plants, based on combustion or other thermal processes, need an efficient gas cleaning for compliance with legislative air emission standards. The development of gas cleaning technologies started along with environment protection regulations in the late 1960s. Modern APC (air pollution control) systems comprise multiple stages for the removal of fly ashes, inorganic and organic gases, heavy metals, and dioxins from the flue gas. The main technologies and devices used for abatement of the various pollutants are described and their basic principles, their peculiarities, and their application are discussed. Few systems for cleaning of synthesis gas from waste gasification plants are included. Examples of APC designs in full scale plants are shown and cautious prospects for the future development of APC systems are made. PMID:25022549
This paper puts forward a novel concept, the spatial flow influence factor (SFIF), which provides a new insight into the airflow structure. This concept is very helpful in the control of indoor air pollutants since: (1) for a given indoor airflow and given sources of volatile organic compounds (VOCs), the optimal arrangement of the VOC sources can easily be obtained; (2) for given positions of VOC sources and occupied regions (or target regions), the optimal indoor airflow pattern or organization can be determined; (3) the SFIF for an indoor space can also be regarded as the indoor air safety index of that space. To illustrate this concept, we present several examples of applying a SFIF to indoor air VOC control.
Kirk R Smith
Outdoor air pollution in developing-country cities is difficult to overlook. Indoor air pollution caused by burning such traditional fuels as wood, crop residues, and dung is less evident, yet it is responsible for a significant part of country and global disease burdens. The main groups affected are poor women and children in rural areas and urban slums as they go about their daily activi...
Ahmet Soysal; Yucel Demiral
The existance of hazardious materials including biological, chemical, and physical agents such as carbon dioxide, carbon monoxide, sulphur dioxide, nitrogen oxides, radon, volotile organic compounds, microorganisms in houses and the other non-industrilized buildings have been defined as indoor air pollution. Indoor air pollutants could possible arised from inside or outside environment and categorized into six subgroups. Almost 80% Turkish population have living in the urban areas...
Indoor air pollution after being a neglected subject for a number of years, is attracting attention recently because it is a side effect of energy crisis. About 50% of world's 6 billion population, mostly in developing countries, depend on biomass and coal in the form of wood, dung and crop residues for domestic energy because of poverty. These materials are burnt in simple stoves with incomplete combustion and infants, children and women are exposed to high levels of indoor air pollution for a considerable period, approximately between 2-4 hours daily. Current worldwide trade in wood fuel is over US $7 billion and about 2 million people are employed full time in production and marketing it. One of the most annoying and common indoor pollutant in both, developing and developed countries, is cigarette smoke. Children in gas-equipped homes had higher incidences of respiratory disease. Babies' DNA can be damaged even before they are born if their mothers breathe polluted air. Exposure to indoor air pollution may be responsible for nearly 2 million excess deaths in developing countries and for 4% of the global burden of the disease. Only a few indoor pollutants have been studied in detail. Indoor air pollution is a major health threat on which further research is needed to define the extent of the problem more precisely and to determine solutions by the policy-makers instead of neglecting it because sufferers mostly belong to Third World countries. (author)
Full Text Available Monitoring of the atmosphere and determination of the types and amounts of pollutants is becoming more important issue in complex and global monitoring of the environment. On the geocomponent and geocomplex level problem of monitoring the environment is attracting the attention of the scientific experts of different profiles (chemists, physicists, geographers, biologists, meteorologists, both in the national and international projects. Because of the general characteristics of the Earth's atmosphere (Dynamically Ballanced Instability DBI and the potential contribution to climate change solutions air-pollution monitoring has become particularly important field of environmental research. Control of aerosol distribution over Europe is enabled by EARLINET systems (European Aerosol Lidar NETwork. Serbia’s inclusion into these European courses needs development of the device, the standardization of methods and direct activity in determining the type, quantity and location of aerosol. This paper is analyzing the first step in the study of air-pollution, which is consisted of the realization of a functional model of LIDAR remote sensing devices for the large particle pollutants.
The World Bank is analyzing the role of economic policy instruments for the control of air pollution in Poland, in cooperation with Polish and international experts. The first stage, covering Poland as a whole, was recently completed, jointly financed with the U.S. E.P.A. and the Government of the Netherlands. The second stage, now under way, will extend the analysis into a specific regional framework. Stage 2 is financed by the World Bank, the Polish Government, and the U.K. Environment Know-How Fund. Air Pollution in Poland is overwhelmingly caused by energy production and uses, due to the fact that the Polish economy depends heavily on coal and lignite. At present, vehicles contribute less to total emissions than do coal burning and industrial processes, although they account for 25-35% of nitrogen oxides, carbon monoxide, hydrocarbons and lead; and the concentrated in areas of high population density. The paper shows how economic, technical and meteorological modelling can be used, to reach conclusions about cost-effective strategies for the control of emissions and the improvement of ambient air quality. A simulation approach is presented, to compare alternative policy instruments, in terms of their impact on emissions and control costs for Poland as a whole. The main instruments considered are open-quotes command-and-controlclose quotes regimes (C ampersand C) and economic incentives, namely fuel taxes, emissions taxes and emissions trading. Next, the paper describes how the analysis is being extended, to link emissions with ambient air quality, using air dispersion modelling, based on a case study for Krakow. Finally, some conclusions are drawn on the importance of sound economic policies for air quality management, the costs of alternative standards, C ampersand C approaches versus economic incentives, a practical strategy to develop an effective role for emissions taxes and trading, and the regional differentiation of policy instruments
J. C. Gong
Full Text Available Aldehydes are ubiquitous constituents of the atmosphere. Their concentrations are elevated in polluted urban atmospheres. The present study was carried out to characterize three aldehydes of most health concern (formaldehyde, acetaldehyde, and acrolein in a central Beijing site in the summer and early fall of 2008 (from June to October. Measurements were made before, during, and after the Beijing Olympics to examine whether the air pollution control measures implemented to improve Beijing's air quality during the Olympics had any impact on concentrations of the three aldehydes. Average concentrations of formaldehyde, acetaldehyde and acrolein were 29.34 ± 15.12 μg/m3, 27.09 ± 15.74 μg/m3 and 2.32 ± 0.95 μg/m3, respectively, for the entire period of measurements, all being the highest among the levels measured in cities around the world in photochemical smog seasons. Among the three measured aldehydes, only acetaldehyde had a substantially reduced mean concentration during the Olympic air pollution control period compared to the pre-Olympic period. Formaldehyde and acrolein followed the changing pattern of temperature and were each significantly correlated with ozone (a secondary product of photochemical reactions. In contrast, acetaldehyde was significantly correlated with several pollutants emitted mainly from local emission sources (e.g., NO2, CO, and PM2.5. These findings suggest that local direct emissions had a larger impact on acetaldehyde than formaldehyde and acrolein.
The hourly and daily air quality concentration in the total air pollutant emission amount control zone is not sure to be continuously up to national ambient air quality standard,even though the total annual air pollutant emission is permitted under the total air pollutant emission amount control (TAPEAC) on the basis of A-value method. So the concept of the environmental quality guarantee ratio (EQGR) for TAPEAC is advanced in this paper and its quantitative formula is figured out for both hourly and daily EQGR. It is concluded that the EQGR is related with the yearly arrangement of A-value besides the pollutant type.According to the meteorological data in a lower area along Yangtze River in 2000, the yearly A-value trend is analyzed. Based on the data, the hourly EQGR of SO2 and NO2 is respectively 97.4% and 90.2%, and daily EQGR respectively 90.2% and 79.5%.
National Tuberculosis and Respiratory Disease Association, New York, NY.
As the dangers of polluted air to the health and welfare of all individuals became increasingly evident and as the complexity of the causes made responsibility for solutions even more difficult to fix, the National Tuberculosis and Respiratory Disease Association felt obligated to give greater emphasis to its clean air program. To this end they…
Xiaodan Guo; Dongxiao Niu; Bowen Xiao
Recently, China has brought out several air-pollution control policies, which indicate the prominent position that PV power hold in improving atmosphere environment. Under this policy environment, the development of China’s PV power will be greatly affected. Firstly, after analyzing the influencing path of air-pollution control policies on PV power, this paper built a system dynamics model, which can be used as a platform for predicting China’s PV power development in every policy scenario du...
Felsvang, K.; Jacobsen, N. [NIRO A/S, Copenhagen (Denmark); Christiansen, O.B. [NIRO Inc., Columbia, MD (United States); Morvan, G. [ABB, Paris (France); Klinke, G. [GEA-Wiegand, Karlsruhe (Germany)
During the last two decades, incineration of sewage sludge, municipal solid waste (MSW) and hazardous waste as a means of volume reduction have grown in importance. Although Europe has been leading the development in the use of incineration, North America today also has a substantial amount of incinerators. As the application of incinerators has increased, concerns have been raised over potential air pollution impacts associated with their use. This has led to the promulgation of emission limits and control requirements for a wide range of pollutants. This paper describes the trends in the emission requirements both in Europe and North America as well as the development of air pollution control technology to cope with the more stringent requirements. The paper describes development of a new process, the High-Performance Spray Dryer Absorber System, which is designed to meet all the new and future emission requirements. Finally the paper deals with mercury removal and results of a 5-year study of mercury revolatilization from dry end product.
Sozzi, Roberto; Favaron, Maurizio [Servizi Territorio, Cinisello Balsamo, (Italy)
What all the environmental laws of the various nations manifest is to permit a harmonic economical development without creating problems to the environment. This paper states that in order to achieve the former it is needed first to know the air pollution, second, the understanding of the transport phenomena and the dispersion of the pollutants in the air, and third the air pollution control. To confront in an effective manner the air pollution problems it is proposed the use of the MONIQA System. This system will aid the designer, the authorities and the population to respond to their questions in a fast and quick manner [Espanol] Lo que expresan todas las leyes ambientales de las diferentes naciones es permitir un desarrollo economico armonico sin crear problemas al medio ambiente. Esta ponencia propone que para lograr lo anterior es necesario primero el conocimiento de la contaminacion atmosferica, segundo la comprension de los fenomenos del transporte y de la dispersion de los contaminantes en el aire y tercero, el control de la contaminacion del aire. Para confrontar de manera eficaz los problemas de contaminacion atmosferica se propone el uso del sistema MONIQA. Este sistema ayudara a los proyectistas, autoridades y a la poblacion a responder sus preguntas de manera rapida y veloz
The Consolidated Incineration Facility (CIF) at the Savannah River Site is designed to treat solid and liquid RCRA hazardous and mixed wastes generated by site operations and clean-up activities. The technologies selected for use in the CIF air pollution control system (APCS) were based on reviews of existing commercial and DOE incinerators, on-site air pollution control experience, and recommendations from contracted consultants. In order to study the CIF APCS prior to operation, a 1/10 scale pilot facility, known as the Offgas Components Test Facility (OCTF) was constructed and has been in operation since late 1994. Its current mission is to demonstrate the design integrity of the CIF APCS and optimize equipment/instrument performance of the full scale production facility. Due to the nature of the wastes to be incinerated at the CIF, High Efficiency Particulate Air (HEPA) filters are used to remove hazardous and radioactive particulates from the exhaust gas stream before being released into the atmosphere. The HEPA filter change-out frequency has been a potential issue and was the first technical issue to be studied at the OCTF. Tests were conducted to evaluate the performance of HEPA filters under different operating conditions. These tests included evaluating the impact on HEPA life of scrubber operating parameters and the type of HEPA prefilter used. This pilot-scale testing demonstrated satisfactory HEPA filter life when using cleanable metal prefilters and high flows of steam and water in the offgas scrubber
Hwang, Bing-Fang; Lee, Yungling Leo; Jaakkola, Jouni J K
Previous epidemiologic studies have assessed the role of the exposure to ambient air pollution in the development of cardiac birth defects, but they have provided somewhat inconsistent results. To assess the associations between exposure to ambient air pollutants and the risk of cardiac defects, a population-based case-control study was conducted using 1087 cases of cardiac defects and a random sample of 10,870 controls from 1,533,748 Taiwanese newborns in 2001 to 2007.Logistic regression was performed to calculate odds ratios for 10 ppb increases in O3 and 10 μg/m increases in PM10. In addition, we compared the risk of cardiac defects in 4 categories-high exposure (>75th percentile); medium exposure (75th to 50th percentile); low exposure (patent ductus arteriosus (PDA) were associated with 10 ppb increases in O3 exposure during the first 3 gestational months among term and preterm babies. In comparison between high PM10 exposure and reference category, there were statistically significant elevations in the effect estimates of ASD for all and terms births. In addition, there was a negative or weak association between SO2, NO2, CO, and cardiac defects.The study proved that exposure to outdoor air O3 and PM10 during the first trimester of gestation may increase the risk of VSD, ASD, and PDA. PMID:26554783
Lundtorp, Kasper; Jensen, Dorthe Lærke; Sørensen, Mette Abildgaard;
Air pollution control (APC) residues from municipal solid waste incineration (MSWI) are difficult to landfill due to substantial leaching of trace metals. An on-site pretreatment prior to landfilling of APC-residues was investigated in terms of bench-scale experiments with a semidry APC-residue and...... a fly ash. The treatment involved mixing of the residues with a ferrous sulphate solution and subsequent oxidation of the suspension. Afterwards, the suspension was spread on a dedicated landfill section and allowed to drain by gravity through the drainage system of the landfill. The wastewater from...
Orrin, John (South Bank Univ., London (United Kingdom))
Modern control theory is now being used to reduce pollution from fossil fuel combustion. Powerful microprocessors using digital control algorithms are now used to make combustion systems, such as industrial furnaces and car engines, operate with optimal performance. These systems operate to achieve a balance between lean fuel burning with the reduced pollution produced, but more engine noise and vibration, and an air/fuel mixture that produces good engine performance but worse pollution. (UK)
Vehlow, J., E-mail: email@example.com
Highlights: • The paper describes in brief terms the development of gas cleaning in waste incineration. • The main technologies for pollutant removal are described including their basic mechanisms. • Their respective efficiencies and their application are discussed. • A cautious outlook regarding future developments is made. - Abstract: All WtE (waste-to-energy) plants, based on combustion or other thermal processes, need an efficient gas cleaning for compliance with legislative air emission standards. The development of gas cleaning technologies started along with environment protection regulations in the late 1960s. Modern APC (air pollution control) systems comprise multiple stages for the removal of fly ashes, inorganic and organic gases, heavy metals, and dioxins from the flue gas. The main technologies and devices used for abatement of the various pollutants are described and their basic principles, their peculiarities, and their application are discussed. Few systems for cleaning of synthesis gas from waste gasification plants are included. Examples of APC designs in full scale plants are shown and cautious prospects for the future development of APC systems are made.
Highlights: • The paper describes in brief terms the development of gas cleaning in waste incineration. • The main technologies for pollutant removal are described including their basic mechanisms. • Their respective efficiencies and their application are discussed. • A cautious outlook regarding future developments is made. - Abstract: All WtE (waste-to-energy) plants, based on combustion or other thermal processes, need an efficient gas cleaning for compliance with legislative air emission standards. The development of gas cleaning technologies started along with environment protection regulations in the late 1960s. Modern APC (air pollution control) systems comprise multiple stages for the removal of fly ashes, inorganic and organic gases, heavy metals, and dioxins from the flue gas. The main technologies and devices used for abatement of the various pollutants are described and their basic principles, their peculiarities, and their application are discussed. Few systems for cleaning of synthesis gas from waste gasification plants are included. Examples of APC designs in full scale plants are shown and cautious prospects for the future development of APC systems are made
Zhao, Y.; Zhang, J.; C. P. Nielsen
To examine the efficacy of China's actions to control atmospheric pollution, three levels of growth of energy consumption and three levels of implementation of emission controls are estimated, generating a total of nine combined activity-emission control scenarios that are then used to estimate trends of national emissions of primary air pollutants through 2030. The emission control strategies are expected to have more effects than the energy paths on the future emission tre...
Zhao, Y.; Zhang, J.; C. P. Nielsen
To examine the efficacy of China's actions to control atmospheric pollution, three levels of growth of energy consumption and three levels of implementation of emission controls are estimated, generating a total of nine combined activity-emission control scenarios that are then used to estimate trends of national emissions of primary air pollutants through 2030. The emission control strategies are expected to have more effects than the energy paths on the fu...
Wu, Chengli; Cao, Yan; Dong, Zhongbing; Cheng, Chinmin; Li, Hanxu; Pan, Weiping
Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation affect mercury removal efficiently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor affecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation efficiency reached 71.0%. Therefore, oxidized mercury removal efficiency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%-96.8% of oxidized mercury was controlled, but only 54.9%-68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal efficiency was 95.9%-98.0%, and there was a big difference in the total mercury removal efficiencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08. PMID:20397418
Schwartz, Joel David
Although particulate air pollution has been associated with increased numbers of daily deaths in dozens of cities around the world, issues still remain about the association. Some have questioned the complex modeling used to control for season in Poisson regression or the role of gaseous air pollutants as potential confounders of the association. I examined the association between deaths and particulate matter with an aerodynamic diameter less than or equal to 10 microm (PM10) using a case-cr...
Dimitriou, Anastasia; Christidou, Vasilia
This paper reports on a study of pupils' knowledge and understanding of atmospheric pollution. Specifically, the study is aimed at identifying: 1) the extent to which pupils conceptualise the term "air pollution" in a scientifically appropriate way; 2) pupils' knowledge of air pollution sources and air pollutants; and 3) pupils' knowledge of air…
The pollution of air with SO2 and NOx constitutes a problem which can be regionally delimited and can be solved by a harmonization of pollution control standards at the highest possible level. The growing CO2 concentration in the atmosphere, however, has possibly a strong impact on the global climate. In this context it has to be borne in mind in particular that it will be impossible to undo environmental damage once it has arisen. Once lasting changes of the world climate have been caused by the increased CO2 concentration, all the pollution control efforts will not achieve any short-term success but will produce desired effects only with a time-lag of decades at the earliest. All measures by a country to contain CO2 emissions on a national level are almost ineffective if a reduction of CO2 emissions is not aimed at by international agreements at the same time. All nations are therefore called upon to help solve the CO2 problem. National single-handed approaches are equally inappropriate as the oft-heard reference to the just marginal contribution by the respective countries to global CO2 emissions. In light of their possibilities and the magnitude of the problem, it is precisely the industrial nations that have the duty not only to cut CO2 emissions in their own countries but also to give the developing countries the assistance required to keep the CO2 content of the atmosphere from rising further. (author). 9 figs
With increasing urbanization and economic growth, air pollution is becoming an urgent concern in South Asia. The objective of this study is to look into and discuss the socioeconomic situation of South Asia, the existing situation of air pollution in the countries of the region, resulting health impacts of air pollution on the population and the responses, if any, of national governments to combat this problem. With the increase in industrial activity and exponential growth in number of vehicles and population, the contribution of each South Asian country to the regional air pollution will increase over time. As evident from the review of the available country data, sulfur dioxides, nitrogen oxides and particulate matter (PM) emissions have been rising steadily over past few decades. The air pollutants can be transported across state and national boundaries, therefore, pollutants produced by one country can, as well, have adverse impacts on the environment and public health of neighboring countries. It has been reported by the country national health authorities that air pollution has pushed respiratory diseases up in the ranks as the leading cause of hospitalization. To minimize the socio-economic and health impacts, resulting from air pollution, South Asian states have developed environmental legal and regulatory frameworks in their respective countries. However, the implementation of country national environmental action plan has been limited due to lack of financial resources and technical know-how. Recommendations have been made for policy actions, including a legally binding agreement for South Asia (LBA-SA), for strengthening the framework for air pollution reduction at regional and national levels in South Asia. (author)
In 1997, the Department of Energy (DOE) Savannah River Site (SRS) plans to begin operation of the Consolidated Incineration Facility (CIF) to treat solid and liquid RCRA hazardous and mixed wastes. The Savannah River Technology Center (SRTC) leads an extensive technical support program designed to obtain incinerator and air pollution control equipment performance data to support facility start-up and operation. A key component of this technical support program includes the Offgas Components Test Facility (OCTF), a pilot-scale offgas system test bed. The primary goal for this test facility is to demonstrate and evaluate the performance of the planned CIF Air Pollution Control System (APCS). To accomplish this task, the OCTF has been equipped with a 1/10 scale CIF offgas system equipment components and instrumentation. In addition, the OCTF design maximizes the flexibility of APCS operation and facility instrumentation and sampling capabilities permit accurate characterization of all process streams throughout the facility. This allows APCS equipment performance to be evaluated in an integrated system under a wide range of possible operating conditions. This paper summarizes the use of this DOE test facility to successfully demonstrate APCS operability and maintainability, evaluate and optimize equipment and instrument performance, and provide direct CIF start-up support. These types of facilities are needed to permit resolution of technical issues associated with design and operation of systems that treat and dispose combustible hazardous, mixed, and low-level radioactive waste throughout and DOE complex
Gao, Jinglei; Yuan, Zengwei; Liu, Xuewei; Xia, Xiaoming; Huang, Xianjin; Dong, Zhanfeng
To mitigate serious air pollution, the State Council of China promulgated the Air Pollution Prevention and Control Action Plan in 2013. To verify the feasibility and validity of industrial energy-saving and emission-reduction policies in the action plan, we conducted a cost-benefit analysis of implementing these policies in 31 provinces for the period of 2013 to 2017. We also completed a scenario analysis in this study to assess the cost-effectiveness of different measures within the energy-saving and the emission-reduction policies individually. The data were derived from field surveys, statistical yearbooks, government documents, and published literatures. The results show that total cost and total benefit are 118.39 and 748.15 billion Yuan, respectively, and the estimated benefit-cost ratio is 6.32 in the S3 scenario. For all the scenarios, these policies are cost-effective and the eastern region has higher satisfactory values. Furthermore, the end-of-pipe scenario has greater emission reduction potential than energy-saving scenario. We also found that gross domestic product and population are significantly correlated with the benefit-cost ratio value through the regression analysis of selected possible influencing factors. The sensitivity analysis demonstrates that benefit-cost ratio value is more sensitive to unit emission-reduction cost, unit subsidy, growth rate of gross domestic product, and discount rate among all the parameters. Compared with other provinces, the benefit-cost ratios of Beijing and Tianjin are more sensitive to changes of unit subsidy than unit emission-reduction cost. These findings may have significant implications for improving China's air pollution prevention policy. PMID:26595398
In California, significant progress has been made to control emissions from industrial sources as well as from motor vehicles. Nonetheless, policy analysts still debate over whether it makes sense to control motor vehicle emissions through legislated reductions in vehicle use, especially when new vehicle emission standards are becoming even more stringent in California. In this paper, the emission reduction benefits of California's new low-emission vehicles and clean fuels program are reviewed. The air quality management plans of three major metropolitan areas in California are examined, to identify emission reductions needed to meet federal and state air quality standards. For each of these three areas, emission reductions expected from transportation control measure implementation are presented. Then, the extent to which the reductions are open-quotes significantclose quotes and relied upon in each of the local attainment efforts is analyzed. The emission reductions expected from the stringent exhaust emission standards of California's new low-emission vehicles and clean fuels program will not be sufficient to meet mandated clean air standards in the study areas. Based upon our review, transportation control measures appear to be necessary components of the air quality management plans in California's major metropolitan areas. The paper concludes that cost-effective transportation control measures (TCMs) will be needed as a complementary strategy to California's stringent tail-pipe standards in moderate to extreme nonattainment areas
Introduction/Rationale: Exposure to air pollutants, including ozone and diesel exhaust (DE) are known to cause acute cardiopulmonary dysfunction; however, the molecular mechanisms underlying these changes remain elusive. One mechanism for rapid regulation of multiple genes is a...
HAO; Jiming; WANG; Litao; LI; Lin; HU; Jingnan; YU; Xuechun
Based on the statistical analysis of emission inventory and ISCST3 model simulation, the emission and ambient concentration contributions of energy-use related sources to the major pollutants of SO2, NOx and PM10 in urban areas of Beijing were analyzed. The SO2 emission contributions of coal burning in power plants, industrial and heating sectors were 49%, 26% and 24% respectively. The vehicle exhaust contributed 74% of the NOx concentration. As to PM10, the industrial sector was the largest emission (28%) and concentration (21%) contributor despite of the fugitive sources. The source emission contributions of VOC and NH3, which greatly influence the generation of secondary pollutants, were discussed as well. This paper also analyzed the control strategies of energy consumption and vehicle sources, based on which the control scenario in 2008 was established and the change of emission and concentration contribution were estimated. The results show that the cleaner energy use, industrial structure improvement, transportation mode modification and single vehicle emission control will greatly improve air quality. The industrial sector will change to the largest contributor of SO2 and as to NOx, vehicle emission control is still important.
Aflalo, Sergio S. [Groupe Environnement S.A., Poissy (France)
After a review of the energy consumption and pollutants emitted in the European Community, especially those concerning the `green house effect`, the author proceeded a summary of the actual legislation and Europeans directives, and also, the Best Available Technology for reducing air pollution is discussed. Original Air Quality monitoring networks performed by Environnement SA are described including measurements obtained around Paris and other areas of France. 7 refs., 11 figs.
Hamming, W.J.; MacBeth, W.C.; Chass, R.L.
There are two distinct pollution problems in the Los Angeles Basin - one in winter, the other most frequently in summer and fall. In winter the concentrations of carbon monoxide, nitrogen oxides, sulfur dioxide and black filterable aerosols are higher than in summer, but the secondary pollutants such as ozone and photochemical oxidants are not as high. The photochemical air pollution syndrome is due to a pattern set by previous smog attacks. This pattern is due to low wind speeds, low inversion heights, a trajectory to carry the pollution and sufficient sunlight to photodissociate the nitrogen dioxide formed and to form nitric oxide and atomic oxygen. The results are high levels of oxidant or ozone and large quantities of particles. 5 references, 9 figures, 7 tables.
The objective of this paper is to present geostatistical models applied to the spatial characterisation of air pollution phenomena. A concise presentation of the geostatistical methodologies is illustrated with practical examples. The case study was conducted in an underground copper-mine located on the southern of Portugal, where a biomonitoring program using lichens has been implemented. Given the characteristics of lichens as indicators of air pollution it was possible to gather a great amount of data in space, which enabled the development and application of geostatistical methodologies. The advantages of using geostatistical models compared with deterministic models, as environmental control tools, are highlighted. (author)
Burns, D.B.; Wong, A.; Walker, B.W.; Paul, J.D. [Westinghouse Savannah River Co., Aiken, SC (United States)
The Consolidated Incineration Facility (CIF) at the US DOE Savannah River Site is undergoing preoperational testing. The CIF is designed to treat solid and liquid RCRA hazardous and mixed wastes from site operations and clean-up activities. The technologies selected for use in the air pollution control system (APCS) were based on reviews of existing incinerators, air pollution control experience, and recommendations from consultants. This approach resulted in a facility design using experience from other operating hazardous/radioactive incinerators. In order to study the CIF APCS prior to operation, a 1/10 scale pilot facility, the Offgas Components Test Facility (OCTF), was constructed and has been in operation since late 1994. Its mission is to demonstrate the design integrity of the CIF APCS and optimize equipment/instrument performance of the full scale production facility. Operation of the pilot facility has provided long-term performance data of integrated systems and critical facility components. This has reduced facility startup problems and helped ensure compliance with facility performance requirements. Technical support programs assist in assuring all stakeholders the CIF can properly treat combustible hazardous, mixed, and low-level radioactive wastes. High Efficiency Particulate Air (HEPA) filters are used to remove hazardous and radioactive particulates from the exhaust gas strewn before being released into the atmosphere. The HEPA filter change-out frequency has been a potential issue and was the first technical issue to be studied at the OCTF. Tests were conducted to evaluate the performance of HEPA filters under different operating conditions. These tests included evaluating the impact on HEPA life of scrubber operating parameters and the type of HEPA prefilter used. This pilot-scale testing demonstrated satisfactory HEPA filter life when using cleanable metal prefilters and high flows of steam and water in the offgas scrubber. 8 figs., 2 tabs.
The Consolidated Incineration Facility (CIF) at the US DOE Savannah River Site is undergoing preoperational testing. The CIF is designed to treat solid and liquid RCRA hazardous and mixed wastes from site operations and clean-up activities. The technologies selected for use in the air pollution control system (APCS) were based on reviews of existing incinerators, air pollution control experience, and recommendations from consultants. This approach resulted in a facility design using experience from other operating hazardous/radioactive incinerators. In order to study the CIF APCS prior to operation, a 1/10 scale pilot facility, the Offgas Components Test Facility (OCTF), was constructed and has been in operation since late 1994. Its mission is to demonstrate the design integrity of the CIF APCS and optimize equipment/instrument performance of the full scale production facility. Operation of the pilot facility has provided long-term performance data of integrated systems and critical facility components. This has reduced facility startup problems and helped ensure compliance with facility performance requirements. Technical support programs assist in assuring all stakeholders the CIF can properly treat combustible hazardous, mixed, and low-level radioactive wastes. High Efficiency Particulate Air (HEPA) filters are used to remove hazardous and radioactive particulates from the exhaust gas strewn before being released into the atmosphere. The HEPA filter change-out frequency has been a potential issue and was the first technical issue to be studied at the OCTF. Tests were conducted to evaluate the performance of HEPA filters under different operating conditions. These tests included evaluating the impact on HEPA life of scrubber operating parameters and the type of HEPA prefilter used. This pilot-scale testing demonstrated satisfactory HEPA filter life when using cleanable metal prefilters and high flows of steam and water in the offgas scrubber. 8 figs., 2 tabs
Full Text Available Recently, China has brought out several air-pollution control policies, which indicate the prominent position that PV power hold in improving atmosphere environment. Under this policy environment, the development of China’s PV power will be greatly affected. Firstly, after analyzing the influencing path of air-pollution control policies on PV power, this paper built a system dynamics model, which can be used as a platform for predicting China’s PV power development in every policy scenario during 2015–2025. Secondly, different model parameters are put into the SD model to simulate three scenarios of air-pollution control policies. Comparisons between the simulated results of different policy scenarios measure the air-pollution control policy’s impact on China’s PV power in the aspect of generation, installed capacity, power curtailment and so on. This paper points out the long-term development pattern of China’s PV power under latest incentive policies, and provides reference for the policymakers to increase the effect and efficiency of air-pollution control policies.
This bibliography contains citations concerning indoor air pollution in residential, commercial, industrial, and institutional buildings. Indoor air quality assessment, health hazard evaluation, and contaminant identification and measurement are discussed. Indoor air pollution control methods and equipment are evaluated. Air quality analyses of energy efficient buildings are presented. Indoor air pollution from radon and asbestos are discussed in other bibliographies. (This updated bibliography contains 75 citations, 16 of which are new entries to the previous edition.)
This book aims to be a comprehensive reference for technological advances in pollution control and abatement and pollution regulations. The first chapter, 'The dilemma of environmental pollution' summarises pollution legislation in the United States and discusses worldwide interest in pollution abatement. Chapter 2 describes some recent environmental disasters and discusses the major air pollutants and their harmful effects. Chapters 3 and 4 assess the various techniques for air pollution control and water pollution control. Chapter 5 is devoted to oil pollution impact and abatement. Solid waste management and methods of solid waste disposal are discussed in chapter 6, and noise pollution, its harmful effects and its control are dealt within chapter 7. Appendices contain a glossary, a summary of the US Clean Air Act and the US drinking water regulations and reference figures and tables relating to energy and the environment. Individual chapters contain many references
Stokes, N. J.; Lucas, P. W.; Nicholas Hewitt, C.
The design and construction of eight 1-m 3 fumigation chambers for exposing plants to reactive air pollutants at low concentrations are reported. Teflon surfaces are used where possible to minimize the adsorption, absorption, desorption and chemical reaction of the pollutants. A purified ambient air supply, to which metered quantities of gaseous pollutants are added, is used to give two air changes per minute at constant, low, pollutant concentrations. Comparative analysis of the chambers indicates that conditions may be maintained with a significant degree of precision, i.e. temperature ±0.3°C, RH ±6%, light intensity ±5 μmol m -2 s -1. Boundary layer analysis from models of cherry tree ( Prunus avium) leaves indicate that the minimum conductance value within these chambers is 2 cm s -1.
Downing, Paul B., Ed.
The social science literature, dealing with air quality, up to mid-1970 is reviewed and synthesized in five separately authored chapters, one for each of sociology, psychology, political science, law and economies. In addition to suggesting what each discipline can contribute to the solution of the air pollution problem, gaps in the literature are…
This paper surveys recent efforts to relax the rigid regulatory frameworks for air pollution control in Europe and the USA. European policies have mainly taken the form of bubbles and compensation or offset schemes. Emission trading has been limited to intra-firm solutions for various reasons: industry structure, absence of real scarcity, and too restrictive trading rules. Bubbles have been granted to homogenous sectors only and can be characterized as direct regulation for a group rather than tradeable permit systems. By contrast, the sulphur allowance program in the USA has laid down the foundation for a pollution permit market with few formal restrictions. Problems that arise arc mainly related to local environmental and public utility controls. Europe can learn from the USA that regular national permit markets could be installed, preferably for homogenous sectors. In designing the permit system, the differences between the USA and Europe in terms of ecosystem sensitively, stringency of regulation and differentiation of regional environmental policy have to be taken into account. 1 fig., 2 tabs., 54 refs
Kim, Seong Soo; Son, Jae Ik; Park, Young Ok; Kim, Hong Yong; Cho, Sung Ho [Korea Inst. of Energy Research, Taejon (Korea, Republic of)
1. Status of photochemical air pollution in the capital area and control strategy. The results of this study show that the air quality in the capital area has an indication of regional photochemical air pollution. Primary pollutants can be controlled at the emission sources, but it is not easy to find the target of photochemical pollution control. For effective photochemical pollution control, basic studies on the fraction of VOCs in total hydrocarbon emissions, the composition of VOCs, and non-traditional emissions such as those from solvent use should be conducted. Comprehensive studies on photochemical pollution control strategies in this report would be useful for identifying essential factors on devising strategies. 2. Air quality modelling using STEM-II. Modelling domain in the last year was confined to the capital area that was too small for a regional-scale model. Modeling domain in this year covered the east of China to the East Sea. The results of modeling in this year were much better than those of the last year. However, the limitations associated with incomplete input data and modeling domain that was too large for the capital area would not be overcome without sufficient basic studies. (author). 29 refs., 34 figs., 21 tabs.
Wu, Dan; Xu, Yuan; Zhang, Shiqiu
By following an empirical approach, this study proves that joint regional air pollution control (JRAPC) in the Beijing-Tianjin-Hebei region will save the expense on air pollution control compared with a locally-based pollution control strategy. The evidences below were found. (A) Local pollutant concentration in some of the cities is significantly affected by emissions from their surrounding areas. (B) There is heterogeneity in the marginal pollutant concentration reduction cost among various districts as a result of the cities' varying contribution of unit emission reduction to the pollutant concentration reduction, and their diverse unit cost of emission reduction brought about by their different industry composition. The results imply that the cost-efficiency of air pollution control will be improved in China if the conventional locally based regime of air pollution control can shift to a regionally based one. PMID:25463568
A description of the principal characteristics regarding the Italian electrical power system and the evolution of standardization in air pollution control is given. Afterwards, ENEL (the Italian National Electricity Board) actions in the environmental protection field (with particular respect to thermo-electrical production) are presented. Finally, principal ENEL research programs on new air pollution control technologies are discussed
The large urban centers of the industrializing countries of the world are experiencing severe air quality problems as their demands for energy increase faster than their ability to afford strong environmental protection. This situation is particularly true in the fast-growing part of Asia, where coal often provides the fuel for power generation and industrial development and where the transportation sector grows unchecked. This paper describes the development of an integrated assessment of urban air quality and mitigation options for the city of Shanghai, China. First, a sector-specific, gridded inventory of emissions of SO(sub 2), NO(sub x), and particulate matter (PM) is developed. PM is divided into three size categories (TSP, PM(sub 10), and PM(sub 2.5)) and split into carbonaceous and mineral classes. The URBAT model, a non-steady-state Lagrangian puff model, and related techniques are used to determine the spatial distribution of ambient concentrations of primary and secondary pollutant species. Damage functions are developed to determine the effects of these levels on human health in the greater Shanghai area. Two control scenarios are developed (for power generation and industry), and their effects on emissions of each species are estimated. The health benefits of the control measures are determined, and their relative costs are calculated. The result is a rudimentary cost-benefit analysis that can be used by urban and environmental planners as a guide for determining the relative effectiveness of taking different courses of action
Full Text Available The solution of applications for air pollution control in foundries for iron and non-ferrous metals may not only be understood as theobservance of requested emission limit values at the stack outlet. An effective environmental protection already starts with the greatest possible capture of pollutants at the source with at the same time minimisation of the volume flow necessary for this. Independent of this, the downstream installed filtration system has to realise a degree of separation of definitely above 99%.Furthermore, when selecting the filter construction, attention has to be paid to a high availability. An even temporarily productionwithout filter will more and more no longer be accepted by residents and authorities. Incidents at the filter lead to a shutdown of the whole production.Additional measures for heat recovery while preparing concepts for filtration plants help to reduce the energy consumption and servefor a sustained conservation of environment.A consequent consideration of the items above is also condition for the fact that environmental protection in foundries remainsaffordable. The lecture deals with the subjects above from the point of view of a plant constructor.
... Control District, Sacramento Municipal Air Quality Management District and South Coast Air Quality... Municipal Air Quality Management District (SMAQMD) and South Coast Air Quality Management District (SCAQMD... ``anonymous access'' system, and EPA will not know your identity or contact information unless you provide...
Wang, Lining; Patel, Pralit L.; Yu, Sha; Liu, Bo; Mcleod, Jeffrey D.; Clarke, Leon E.; Chen, Wenying
The rapid growth of energy consumption in China has led to increased emissions of air pollutants. As a response, in its 12th Five Year Plan the Chinese government proposed mitigation targets for SO2 and NOx emissions. Herein we have investigated mitigation measures taken in different sectors and their corresponding impacts on the energy system. Additionally, as non-fossil energy development has gained traction in addressing energy and environmental challenges in China, we further investigated the impact of non-fossil energy development on air pollutant emissions, and then explored interactions and co-benefits between these two types of policies. An extended Global Change Assessment Model (GCAM) was used in this study, which includes an additional air pollutant emissions control module coupling multiple end-of-pipe (EOP) control technologies with energy technologies, as well as more detailed end-use sectors in China. We find that implementing EOP control technologies would reduce air pollution in the near future, but with little room left to implement these EOP technologies, other cleaner and more efficient technologies are also effective. These technologies would reduce final energy consumption, increase electricity’s share in final energy, and increase the share of non-fossil fuels in primary energy and electricity consumption. Increasing non-fossil energy usage at China’s proposed adoption rate would in turn also reduce SO2 and NOx emissions, however, the reductions from this policy alone still lag behind the targeted requirements of air pollutant reduction. Fortunately, a combination of air pollutant controls and non-fossil energy development could synergistically help realize the respective individual targets, and would result in lower costs than would addressing these issues separately.
Damgaard, Anders; Riber, C.; Fruergaard, Thilde;
Incineration of municipal solid waste is a debated waste management technology. In some countries it is the main waste management option whereas in other countries it has been disregarded. The main discussion point on waste incineration is the release of air emissions from the combustion of the...... waste, but also the energy recovery efficiency has a large importance. The historical development of air pollution control in waste incineration was studied through life-cycle-assessment modelling of eight different air pollution control technologies. The results showed a drastic reduction in the...... standard impacts. With regards to the toxic impact categories, emissions from the waste incineration process were always larger than those from the avoided energy production based on natural gas. The results shows that the potential environmental impacts from air emissions have decreased drastically during...
...: EPA is taking direct final action to approve revisions to the Monterey Bay Unified Air Pollution... Rule 400 into the SIP on August 11, 2005 (70 FR 46770). The MBUAPCD adopted revisions to the SIP.../15/04 version of the rule on June 30, 2010 (75 FR 37727) C. What is the purpose of the submitted...
Nitrogen oxide air pollution control is considered from both mobile and stationary sources. Fluidized bed combustion, boiler combustion modification, and engine design are discussed, as they relate to emissions reduction. (This updated bibliography contains citations, 76 of which are new entries to the previous edition.)
... Procedures for Aircraft;'' Final Rule, 38 FR 19088, July 17, 1973. \\12\\ U.S. EPA, ``Control of Air Pollution from Aircraft and Aircraft Engines; Emission Standards and Test Procedures;'' Final Rule, 62 FR 25356... Engines; Emission Standards and Test Procedures;'' Final Rule, 70 FR 2521, November 17, 2005. E....
In spite of improvements relative to air pollution, there is still much to do. more than thirty millions of European people are exposed to sulfur dioxide concentrations superior to guide values for health fixed by European Union, 20% of ecosystems in Europe are above the critical charges in the area of acidification and 33% concern eutrophication. Relative to the carbon dioxide, it is not sure that European Union realize the objective to stabilize the emissions for the year 2000 at the level of the year 1990, because of the increasing of automobile traffic and the energy consumption. Four subjects are presented: the climatic change, acidification and eutrophication, tropospheric ozone and air quality. (N.C.)
Cohen, A J; Pope, C A
Epidemiologic studies over the last 40 years suggest rather consistently that general ambient air pollution, chiefly due to the incomplete combustion of fossil fuels, may be responsible for increased rates of lung cancer. This evidence derives from studies of lung cancer trends, studies of occupational groups, comparisons of urban and rural populations, and case-control and cohort studies using diverse exposure metrics. Recent prospective cohort studies observed 30 to 50% increases in lung ca...
Full Text Available The metropolitan city of Seoul uses more energy than any other area in South Korea due to its high population density. It also has high emissions of air pollutants. Since an individual usually spends most of his/her working hours indoors, the ambient air quality refers to indoor air quality. In particular, PM10 concentration in the underground areas should be monitored to preserve the health of commuters in the subway system. Seoul Metro and Seoul Metropolitan Rapid Transit Corporation measure several air pollutants regularly. In this study, the accuracy of an instrument for PM measurement using the light scattering method was improved with the help of a linear regression analysis technique to continuously measure the PM10 concentrations in subway stations. In addition, an air quality monitoring system based on environmental sensors was implemented to display and record the data of PM10, CO2, temperature, and humidity. Through experimental studies, we found that ventilation fans could improve air quality and decrease PM10 concentrations in the tunnels effectively by increasing the air flow rate.
Hyks, Jiri; Astrup, Thomas; Christensen, Thomas H
Long-term leaching of Ca, Fe, Mg, K, Na, S, Al, As, Ba, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Zn, Mo, Sb, Si, Sn, Sr, Ti, V, P, Cl, and dissolved organic carbon from two different municipal solid waste incineration (MSWI) air-pollution-control residues was monitored during 24 months of column percolation experiments; liquid-to-solid (L/S) ratios of 200-250L/kg corresponding to more than 10,000 years in a conventional landfill were reached. Less than 2% of the initially present As, Cu, Pb, Zn, Cr, and Sb had leached during the course of the experiments. Concentrations of Cd, Fe, Mg, Hg, Mn, Ni, Co, Sn, Ti, and P were generally bellow 1microg/L; overall less than 1% of their mass leached. Column leaching data were further used in a two-step geochemical modeling in PHREEQC in order to (i) identify solubility controlling minerals and (ii) evaluate their interactions in a water-percolated column system over L/S of 250L/kg. Adequate predictions of pH, alkalinity, and the leaching of Ca, S, Al, Si, Ba, and Zn were obtained in a simultaneous calculation. Also, it was suggested that removal of Ca and S together with depletion of several minerals apparently caused dissolution of ettringite-like phases. In turn, significant increase in leaching of oxyanions (especially Sb and Cr) was observed at late stage of leaching experiments. PMID:18583034
ZHANG Hua; HE Pin-jing; SHAO Li-ming; FENG Jun-hui; CAO Qun-ke
Increasing attention has been paid to air pollution control (APC) residues in China recently due to the rising proportion of waste incineration and the hazardous characteristics of the residues, among which heavy metal leaching toxicity plays an important role. Leaching behavior and potential risk of Pb and Zn in the APC residues from a Shanghai municipal solid waste (MSW) incinerator was studied, based on the leaching tests under different conditions and theoretical calculation using a geochemical thermodynamic equilibrium model MINTEQA2. Results showed that, extractant species and liquid to solid (L/S) ratio predominantly controlled the leaching toxicity of Pb and Zn, while ionic strength, vibration method and leaching time had less effect on the metals release.Leachate/final pH determined the metal leaching behavior, which changed the speciation of heavy metals in the extraction system. The equilibrium aqueous speciation, precipitation-dissolution of Pb and Zn was investigated according to the model computation, which was well in agreement with the experimental results.
Zhou, B S; Wang, T J; Guan, P; Wu, J M
Factors that affect the risk of lung adenocarcinoma among females were investigated in Shenyang, China, using a population-based case-control study design. A total of 72 new cases, ages 35-69, diagnosed with incident, primary pulmonary adenocarnoma, were collected between April 1991 and December 1995, and were 1:1 age-matched with healthy females randomly selected from the general population. A questionnaire covering demographics, diet/nutritional preferences and cooking habits, living conditions, family history of cancer, sources of indoor/outdoor/occupational pollution, exposure to ETS from spousal smoking, workplace exposure, and exposure during childhood, history of menstruation and pregnancy, was given to each subject in a structured in-person interview given by trained field workers. Univariate analysis was performed on the data collected. The results showed that cooking fumes, family history of lung cancer, economic status, and number of live births and intake of vitamin E were risk factors significantly associated with adenocarcinoma of the lung. In particular, exposure to different levels of cooking fumes, an indoor air pollutant, increased the odds ratio of lung adenocarcinoma by 1.33, 7.33 and 1.67, respectively (trend p=0.006). Another important risk factor was family history of lung cancer, which gave an OR of 7.65 (95% CI, 0.90-169.84). Intake of beta-carotene from vegetables and fruit offered protection against lung adenocarcinoma, giving an OR of 0.28 (95% CI, 0.12-0.69). These results were confirmed by multivariable logistic regression analysis. PMID:11032925
Getachew A. Adnew
Full Text Available Gas-phase advanced oxidation (GPAO is an emerging air cleaning technology based on the natural self-cleaning processes that occur in the Earth’s atmosphere. The technology uses ozone, UV-C lamps and water vapor to generate gas-phase hydroxyl radicals that initiate oxidation of a wide range of pollutants. In this study four types of GPAO systems are presented: a laboratory scale prototype, a shipping container prototype, a modular prototype, and commercial scale GPAO installations. The GPAO systems treat volatile organic compounds, reduced sulfur compounds, amines, ozone, nitrogen oxides, particles and odor. While the method covers a wide range of pollutants, effective treatment becomes difficult when temperature is outside the range of 0 to 80 °C, for anoxic gas streams and for pollution loads exceeding ca. 1000 ppm. Air residence time in the system and the rate of reaction of a given pollutant with hydroxyl radicals determine the removal efficiency of GPAO. For gas phase compounds and odors including VOCs (e.g. C6H6 and C3H8 and reduced sulfur compounds (e.g. H2S and CH3SH, removal efficiencies exceed 80%. The method is energy efficient relative to many established technologies and is applicable to pollutants emitted from diverse sources including food processing, foundries, water treatment, biofuel generation, and petrochemical industries.
Major cities in South-central Chile suffer high levels of particulate matter PM10 and PM2.5 due to combustion of solid fuels for heating. Exposure to these air pollutants is recognized as a major contribution to ill health in the region. Here we discuss new strategies to reduce air pollution. Regulations and subsidies focusing on improved combustion by providing drier wood fuel and better stoves have been in effect since 2007. However, air pollution due to combustion of wood fuel has been steadily rising, along with reports on health consequences. The paper analyzes a survey of 2025 households in the city of Valdivia, which found that wood fuel quality, stove renewal, and awareness of programs are strongly affected by income level, and that higher consumption of wood fuel is found in households already having better stoves and drier wood fuel. The analysis suggests that regulations intended to improve combustion are influenced by user's behavior and have limited potential for lowering pollution. We conclude that thermal refurbishment has a larger potential for improvement, not yet been implemented as an energy policy for the majority. Here we propose improvements and additions to current programs to enhance effectiveness and cover the whole social spectrum. - Highlights: • High levels of PM2.5 from wood combustion affect cities of south-central Chile. • Current programs on dry wood fuel and stoves renewal have not reduced air pollution. • Real operation of wood stoves strongly depends on user's behavior. • Buildings' energy efficiency has greater potential for reducing emissions. • Retrofit prevents degradation of native forest and improves indoor temperature
Fossil fuel combustion creates a the treat to environment. Waste quantities of SO2, NOx and VOC (volatile organic compounds) are emitted in to atmosphere. Municipal wastes incineration is another air pollution potential problem. New technologies for simultaneous removal of different pollutants are searched for. Electron beam process is among the most promising advanced technologies of new generation. The laboratory unit (400 Nm3/h) and industrial pilot plant (20000 Nm3/h) have been constructed in Poland. Full scale industrial project is under development (270000 Nm3/h). New developments, connected mostly with energy consumption reduction, made this process very competitive in comparison with conventional technologies. (author)
This eleventh volume of the series of Air Pollution Studies, published under the auspices of the Executive Body for the Convention on Long-range Transboundary Air Pollution, contains the documents reviewed and approved for publication at the twelfth session of the Executive Body held at Geneva from 28 November to 1 December 1994. Part one focuses on the possible impact of acid deposition on the quality of groundwater in the ECE region. The objective of this report is to present an updated review of available knowledge on the possible impact of deposition of sulphur and nitrogen compounds on the status of groundwater, including a brief survey of recent research results in this field. It updates an earlier report on the effects of air pollutants on groundwater, prepared within the Convention (EB.AIR/WG.1/R.9). Part two is an executive summary of the 1993 Report on the Forest Condition in Europe (Forest Condition in Europe. Results of the 1993 Survey. 1994 Report, EC-UN/ECE, Brussels, Geneva, 1994). The report describes the results of both the national and the transnational surveys which are conducted annually within the International Cooperative Programme on the Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests) of the United Nations Economic Commission for Europe (ECE) and under European Community Council Regulation (EEC) 3528/86 on the protection of the Community's Forests against Atmospheric Pollution. Part three is a summary report on the options for further reduction of nitrogen oxide emissions from road heavy-duty vehicles (HDVs). This report is primarily focused on reduction options for road HDVs, but some of the technical measures reviewed can, however, also be applied to some non-road diesel engines, such as machinery in construction, agriculture or forestry
SIERRA-VARGAS, MARTHA PATRICIA; Teran, Luis M.
ABSTRACT Air pollution is becoming a major health problem that affects millions of people worldwide. In support of this observation, the World Health Organization estimates that every year, 2.4 million people die because of the effects of air pollution on health. Mitigation strategies such as changes in diesel engine technology could result in fewer premature mortalities, as suggested by the US Environmental Protection Agency. This review: (i) discusses the impact of air pollution on respirat...
Travar, I; Kihl, A; Kumpiene, J
The aim of this study was to evaluate the stabilization/solidification (S/S) of trace element-contaminated soil using air pollution control residues (APCRs) prior to disposal in landfill sites. Two soil samples (with low and moderate concentrations of organic matter) were stabilized using three APCRs that originated from the incineration of municipal solid waste, bio-fuels and a mixture of coal and crushed olive kernels. Two APCR/soil mixtures were tested: 30% APCR/70% soil and 50% APCR/50% soil. A batch leaching test was used to study immobilization of As and co-occurring metals Cr, Cu, Pb and Zn. Solidification was evaluated by measuring the unconfined compression strength (UCS). Leaching of As was reduced by 39-93% in APCR/soil mixtures and decreased with increased amounts of added APCR. Immobilization of As positively correlated with the amount of Ca in the APCR and negatively with the amount of soil organic matter. According to geochemical modelling, the precipitation of calcium arsenate (Ca3(AsO4)2/4H2O) and incorporation of As in ettringite (Ca6Al2(SO4)3(OH)12 · 26H2O) in soil/APCR mixtures might explain the reduced leaching of As. A negative effect of the treatment was an increased leaching of Cu, Cr and dissolved organic carbon. Solidification of APCR/soil was considerably weakened by soil organic matter. PMID:26233740
Full Text Available The number concentration of cloud droplets determines several climatically relevant cloud properties. A major cause for the high uncertainty in the indirect aerosol forcing is the availability of cloud condensation nuclei (CCN, which in turn is highly sensitive to atmospheric new particle formation. Here we present the effect of new particle formation on anthropogenic aerosol forcing in present-day (year 2000 and future (year 2100 conditions. The present-day total aerosol forcing is increased from −1.0 W m−2 to −1.6 W m−2 when nucleation is introduced into the model. Nucleation doubles the change in aerosol forcing between years 2000 and 2100, from +0.6 W m−2 to +1.4 W m−2. Two climate feedbacks are studied, resulting in additional negative forcings of −0.1 W m−2 (+10% DMS emissions in year 2100 and −0.5 W m−2 (+50% BVOC emissions in year 2100. With the total aerosol forcing diminishing in response to air pollution control measures taking effect, warming from increased greenhouse gas concentrations can potentially increase at a very rapid rate.
Quina, Margarida J; Bordado, João M; Quinta-Ferreira, Rosa M
This work focuses on the assessment of technological properties and on the leaching behavior of lightweight aggregates (LWA) produced by incorporating different quantities of air pollution control (APC) residues from municipal solid waste (MSW) incineration. Currently this hazardous waste has been mostly landfilled after stabilization/solidification. The LWA were produced by pelletizing natural clay, APC residues as-received from incineration plant, or after a washing treatment, a small amount of oil and water. The pellets were fired in a laboratory chamber furnace over calcium carbonate. The main technological properties of the LWA were evaluated, mainly concerning morphology, bulk and particle densities, compressive strength, bloating index, water adsorption and porosity. Given that APC residues do not own expansive (bloating) properties, the incorporation into LWA is only possible in moderate quantities, such as 3% as received or 5% after pre-washing treatment. The leaching behavior of heavy metals from sintered LWA using water or acid solutions was investigated, and despite the low acid neutralization capacity of the synthetic aggregates, the released quantities were low over a wide pH range. In conclusion, after a washing pre-treatment and if the percentage of incorporation is low, these residues may be incorporated into LWA. However, the recycling of APC residues from MSW incineration into LWA does not revealed any technical advantage. PMID:24238798
Zhao, Y.; Zhang, J.; Nielsen, C. P.
To examine the efficacy of China's actions to control atmospheric pollution, three levels of growth of energy consumption and three levels of implementation of emission controls are estimated, generating a total of nine combined activity-emission control scenarios that are then used to estimate trends of national emissions of primary air pollutants through 2030. The emission control strategies are expected to have more effects than the energy paths on the future emission trends for all the concerned pollutants. As recently promulgated national action plans of air pollution prevention and control (NAPAPPC) are implemented, China's anthropogenic pollutant emissions should decline. For example, the emissions of SO2, NOx, total suspended particles (TSP), PM10, and PM2.5 are estimated to decline 7, 20, 41, 34, and 31% from 2010 to 2030, respectively, in the "best guess" scenario that includes national commitment of energy saving policy and implementation of NAPAPPC. Should the issued/proposed emission standards be fully achieved, a less likely scenario, annual emissions would be further reduced, ranging from 17 (for primary PM2.5) to 29% (for NOx) declines in 2015, and the analogue numbers would be 12 and 24% in 2030. The uncertainties of emission projections result mainly from the uncertain operational conditions of swiftly proliferating air pollutant control devices and lack of detailed information about emission control plans by region. The predicted emission trends by sector and chemical species raise concerns about current pollution control strategies: the potential for emissions abatement in key sectors may be declining due to the near saturation of emission control devices use; risks of ecosystem acidification could rise because emissions of alkaline base cations may be declining faster than those of SO2; and radiative forcing could rise because emissions of positive-forcing carbonaceous aerosols may decline more slowly than those of SO2 emissions and thereby
Full Text Available To examine the efficacy of China's actions to control atmospheric pollution, three levels of growth of energy consumption and three levels of implementation of emission controls are estimated, generating a total of nine combined activity-emission control scenarios that are then used to estimate trends of national emissions of primary air pollutants through 2030. The emission control strategies are expected to have more effects than the energy paths on the future emission trends for all the concerned pollutants. As recently promulgated national action plans of air pollution prevention and control (NAPAPPC are implemented, China's anthropogenic pollutant emissions should decline. For example, the emissions of SO2, NOx, total primary particulate matter (PM, PM10, and PM2.5 are estimated to decline 7%, 20%, 41%, 34%, and 31% from 2010 to 2030, respectively, in the "best guess" scenario that includes national commitment of energy saving policy and partial implementation of NAPAPPC. Should the issued/proposed emission standards be fully achieved, a less likely scenario, annual emissions would be further reduced, ranging from 17% (for primary PM2.5 to 29% (for NOx declines in 2015, and the analogue numbers would be 12% and 24% in 2030. The uncertainties of emission projections result mainly from the uncertain operational conditions of swiftly proliferating air pollutant control devices and lack of detailed information about emission control plans by region. The predicted emission trends by sector and chemical species raise concerns about current pollution control strategies: the potential for emissions abatement in key sectors may be declining due to the near saturation of emission control devices use; risks of ecosystem acidification could rise because emissions of alkaline base cations may be declining faster than those of SO2; and radiative forcing could rise because emissions of positive-forcing carbonaceous aerosols may decline more slowly than
F. Mohsenzadeh, J. Nouri, A. Ranjbar, M. Mohammadian Fazli, A. A. Babaie
Full Text Available Air pollution is a major problem in the industrial areas. Cement dust is one of the important environmental pollutants. In this study the possibility of dust recycling especially kiln dust which has significant importance regarding air pollution in the cement plant, was examined. Tehran cement factory is one of the most important Iranian factories which is located in Tehran. This factory produces high volume of pollutants that are released to in environment. The possibility of reusing of kiln by pass returned dust has been examined in this factory. Different percentages of kiln by-pass dust of this factory were added to products and outcomes of its presence in parameters such as chemical compound, granulation, primary and final catch time, volume expansion, consumed water and resistance of mortar were surveyed. The result indicated that by adding the amounts of 3-8 dust the mortar resistance increase, but adding more than 15%, the mortar resistance has been decreased. Survey in consumed water proved that adding dust to cement, the trend for consuming water is decreased. After dust addition dust, primary and final catch time were compared in different samples and data which showed decrease in dust added samples. Cements with dust added showed increase in auto clave expansion. Overally, results proved that, the best percentage rate of dust addition to the cement was 15%.
Ambient air pollution arising from different sources in Karachi and its surroundings has been studied. The urban centres like Karachi are mostly confronted with eye-irritation, reduce visibility, heart-diseases, nervous disorder, smog and other unpleasant experiences. In this paper quantitative estimations of some air-pollutants such as sulphur dioxide, carbon monoxide, oxides of nitrogen, chlorine and particular matters are presented with their hazardous effects. The remedial measures for the control of major air emissions are also discussed. (author)
Takahashi, Fumitake; Kida, Akiko; Shimaoka, Takayuki
Although representative removal efficiencies of gaseous mercury for air pollution control devices (APCDs) are important to prepare more reliable atmospheric emission inventories of mercury, they have been still uncertain because they depend sensitively on many factors like the type of APCDs, gas temperature, and mercury speciation. In this study, representative removal efficiencies of gaseous mercury for several types of APCDs of municipal solid waste incineration (MSWI) were offered using a statistical method. 534 data of mercury removal efficiencies for APCDs used in MSWI were collected. APCDs were categorized as fixed-bed absorber (FA), wet scrubber (WS), electrostatic precipitator (ESP), and fabric filter (FF), and their hybrid systems. Data series of all APCD types had Gaussian log-normality. The average removal efficiency with a 95% confidence interval for each APCD was estimated. The FA, WS, and FF with carbon and/or dry sorbent injection systems had 75% to 82% average removal efficiencies. On the other hand, the ESP with/without dry sorbent injection had lower removal efficiencies of up to 22%. The type of dry sorbent injection in the FF system, dry or semi-dry, did not make more than 1% difference to the removal efficiency. The injection of activated carbon and carbon-containing fly ash in the FF system made less than 3% difference. Estimation errors of removal efficiency were especially high for the ESP. The national average of removal efficiency of APCDs in Japanese MSWI plants was estimated on the basis of incineration capacity. Owing to the replacement of old APCDs for dioxin control, the national average removal efficiency increased from 34.5% in 1991 to 92.5% in 2003. This resulted in an additional reduction of about 0.86Mg emission in 2003. Further study using the methodology in this study to other important emission sources like coal-fired power plants will contribute to better emission inventories. PMID:20713298
Xu, Changqing; Hong, Jinglan; Ren, Yixin; Wang, Qingsong; Yuan, Xueliang
This study aims at qualifying air pollutants and environmental impacts generated from coal-based power plants and providing useful information for decision makers on the management of coal-based power plants in China. Results showed that approximately 9.03, 54.95, 62.08, and 12.12% of the national carbon dioxide, sulfur dioxide, nitrogen oxides, and particulate matter emissions, respectively, in 2011were generated from coal-based electricity generation. The air pollutants were mainly generated from east China because of the well-developed economy and energy-intensive industries in the region. Coal-washing technology can simply and significantly reduce the environmental burden because of the relativity low content of coal gangue and sulfur in washed coal. Optimizing the efficiency of raw materials and energy consumption is additional key factor to reduce the potential environmental impacts. In addition, improving the efficiency of air pollutants (e.g., dust, mercury, sulfur dioxide, nitrogen oxides) control system and implementing the strict requirements on air pollutants for power plants are important ways for reducing the potential environmental impacts of coal-based electricity generation in China. PMID:25903190
Berg, Rolf W.
A Danish new book on ozone as an air pollutant has been reviewed. The Book is "Ozon som luftforurening" by Jes Fenger, Published by "Danmarks Miljøundersøgelser, 1995.......A Danish new book on ozone as an air pollutant has been reviewed. The Book is "Ozon som luftforurening" by Jes Fenger, Published by "Danmarks Miljøundersøgelser, 1995....
Hoare, John L.
The original choice of particulate matter mass (PM) as a realistic surrogate for gross air pollution has gradually evolved into routine use nowadays of epidemiologically-based estimates of the monetary and other benefits expected from regulating urban air quality. Unfortunately, the statistical associations facilitating such calculations usually are based on single indices of air pollution whereas the health effects themselves are more broadly based causally. For this and other reasons the economic benefits of control tend to be exaggerated. Primarily because of their assumed inherently inferior respirability, particles ≥10 μm are generally excluded from such considerations. Where the particles themselves are chemically heterogeneous, as in an urban context, this may be inappropriate. Clearly all air-borne particles, whether coarse or fine, are susceptible to inhalation. Hence, the possibility exists for any adhering potentially harmful semi-volatile substances to be subsequently de-sorbed in vivo thereby facilitating their transport deeper into the lungs. Consequently, this alone may be a sufficient reason for including rather than rejecting during air quality monitoring the relatively coarse 10-100 μm particle fraction, ideally in conjunction with routine estimation of the gaseous co-pollutants thereby facilitating a multi-pollutant approach apropos regulation.
Full Text Available This paper studies the interannual variability of pollution pathways from northern hemisphere (NH continents into the Arctic. Using a 15-year model simulation of the dispersion of passive tracers representative of anthropogenic emissions from NH continents, we show that the North Atlantic Oscillation (NAO exerts a strong control on the pollution transport into the Arctic, particularly in winter and spring. For tracer lifetimes of 5 (30 days, surface concentrations in the Arctic winter are enhanced by about 70% (30% during high phases of the NAO (in the following referred to as NAO+ compared to its low phases (NAO-. This is mainly due to great differences in the pathways of European pollution during NAO+ and NAO- phases, respectively, but reinforced by North American pollution, which is also enhanced in the Arctic during NAO+ phases. In contrast, Asian pollution in the Arctic does not significantly depend on the NAO phase. The model results are confirmed using remotely-sensed NO2 vertical atmospheric columns obtained from seven years of satellite measurements, which show enhanced northward NO2 transport and reduced NO2 outflow into the North Atlantic from Central Europe during NAO+ phases. Surface measurements of carbon monoxide (CO and black carbon at high-latitude stations further corroborate the overall picture of enhanced Arctic pollution levels during NAO+ phases
Zhang, Yuanyuan; Yuan, Shuai; Feng, Xiao; Li, Haiwei; Zhou, Junwen; Wang, Bo
Environmental challenges especially air pollution (particulate matter (PM) and toxic gases) pose serious threats to public health globally. Metal-organic frameworks (MOFs) are crystalline materials with high porosity, tunable pore size, and rich functionalities, holding the promise for poisonous pollutants capture. Here, nanocrystals of four unique MOF structures are processed into nanofibrous filters (noted as MOFilter) with high MOF loadings (up to 60 wt %). The MOFilters show high PM removal efficiencies up to 88.33 ± 1.52% and 89.67 ± 1.33% for PM2.5 and PM10, respectively, in the hazy environment, and the performance remains largely unchanged over 48 h of continuous filtration. For the first time, the interactions between such porous crystalline material and particulate pollutants were explored. These thin MOFilters can further selectively capture and retain SO2 when exposed to a stream of SO2/N2 mixture, and their hierarchical nanostructures can easily permeate fresh air at high gas flow rate with the pressure drop <20 Pa. PMID:27090776
Flachs, Esben Meulengracht; Sørensen, Jan; Bønløkke, Jacob;
Objective. To explore how three different assumptions on demographics affect the health impact of Danish emitted air pollution in Denmark from 2005 to 2030, with health impact modeled from 2005 to 2050. Methods. Modeled air pollution from Danish sources was used as exposure in a newly developed......) a static year 2005 population, (2) morbidity and mortality fixed at the year 2005 level, or (3) an expected development. Results. The health impact of air pollution was estimated at 672,000, 290,000, and 280,000 lost life years depending on demographic assumptions and the corresponding social costs at 430.......4 M€, 317.5 M€, and 261.6 M€ through the modeled years 2005–2050. Conclusion. The modeled health impact of air pollution differed widely with the demographic assumptions, and thus demographics and assumptions on demographics played a key role in making health impact assessments on air pollution....
Katsouyanni, K. [Athens Univ. (Greece). Dept. of Hygiene and Epidemiology
Air pollution epidemiology is the study of the occurrence and distribution of health outcomes in association with community air pollution exposure. It is therefore specific in the exposure variable. Air pollution health effects became evident during high air pollution episodes which occurred in the first decades of our century. Since then, legal and other control measures have led to lower air pollution levels. However, recent results from several studies indicate that lower levels of air pollution than the previously considered safe have serious adverse health effects. Although, there is increasingly agreement that air pollution, at levels measured today, affects health, there is still a lot to be understood concerning specific causal pollutants, biologic mechanisms involved and sensitive groups of individuals. The extent of potential confounding, time-considerations in air pollution effects, individual variation in air pollution exposure and exposure misclassification are some factors which complicate the study of these issues. (author)
Guan, Zhenzhen; Chen, Dezhen; Astrup, Thomas Fruergaard
Application of selective non-catalytic reduction systems at municipal solid waste incinerators (MSWIs) often involves over-stoichiometric injection of ammonia into flue gases. Un-reacted ammonia may be deposited on fly ash particles and can ultimately influence the leaching behaviour of air-pollution-control (APC) residues. Batch tests were conducted to investigate the impacts of ammonia levels on leaching of a range of metals (sodium, potassium, calcium, aluminium, chromium, iron, lead, cadmium, copper, nickel and zinc), as well as chloride and dissolved organic carbon (DOC). Specific conductivity was also identified to reflect the soluble components. The results showed that with ammonia concentrations rising from a background level of 4 to 26,400 mg l(-1), the specific conductivity increased by 2-7 times as pH varied from alkaline to acidic values. DOC release was also significantly enhanced with high ammonia levels of 1400 mg l(-1) or higher at pH > 9; however at these high ammonia concentrations, the role of DOC in cadmium, copper, nickel and zinc leaching was negligible. Based on the experimental data, chloride, sodium and potassium were leached at high concentrations regardless of pH and ammonia concentrations. For aluminium, chromium, iron and lead, ammonia had little impact on their leaching behaviour. With respect to cadmium, copper, nickel and zinc, high ammonia concentrations significantly increased leaching in the pH range of 8-12 due to the formation of metal-ammonia complexes, which was also proved in the speciation calculations. However, the overall results suggest that typical levels of ammonia injection in MSWIs are not likely to affect metal leaching from APC residues. PMID:25147306
waves in controlled human air pollution exposure studies is a feasible tool for characterization of cardio-pulmonary effects of such exposures.
... Air Pollution Control District AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule... Valley Unified Air Pollution Control District portion of the California State Implementation Plan (SIP... Valley Unified Air Pollution Control District (SJVUAPCD) Rule 4682, Polystyrene, Polyethylene,...
Dias-Ferreira, Celia; Kirkelund, Gunvor Marie; Jensen, Pernille Erland
Fly ash and Air Pollution Control (APC) residues collected from three municipal solid waste incinerators in Denmark and Greenland were treated by electrodialytic remediation at pilot scale for 8-10 h. This work presents for the first time the effect of electrodialytic treatment on polychlorinated...... materials dissolve, leaving behind the non-water soluble compounds, such as PCDD/PCDF. According to the Basel Convention, PCDD/PCDF levels in these materials is low (
Kindle, E. C.; Bandy, E. C.; Copeland, G.; Blais, R.; Levy, G.; Sonenshine, D.
Past research projects for the year 1974-1975 are listed along with future research programs in the area of air pollution control, remote sensor analysis of smoke plumes, the biosphere component, and field experiments. A detailed budget analysis is presented. Attachments are included on the following topics: mapping forest vegetation with ERTS-1 MSS data and automatic data processing techniques, and use of LARS system for the quantitative determination of smoke plume lateral diffusion coefficients from ERTS images of Virginia.
In the summer of 1988, sixteen superconducting RF cavities were installed to increase the beam energy of TRISTAN and they began to be effective operation in November. One of the obvious problems created by the installation of superconducting equipment to the tunnel is oxygen-poor in case of bursting the liquefied gases. Air pollution in the tunnel from poisonous gases formed by synchrotron radiations is also becoming serious problem as upgrading TRISTAN. It is the purpose of this paper to show the special safety control problems and the system used in TRISTAN to give a solution for these problems. 3 refs., 5 figs., 1 tab
Gaffney, Jeffrey S.; Marley, Nancy A.
Atmospheric chemistry is an important discipline for understanding air pollution and its impacts. This mini-review gives a brief history of air pollution and presents an overview of some of the basic photochemistry involved in the production of ozone and other oxidants in the atmosphere. Urban air quality issues are reviewed with a specific focus on ozone and other oxidants, primary and secondary aerosols, alternative fuels, and the potential for chlorine releases to amplify oxidant chemistry...
This study investigates the potential real world application of passive control systems to reduce personal pollutant exposure in an urban street canyon in Dublin, Ireland. The implementation of parked cars and/or low boundary walls as a passive control system has been shown to minimise personal exposure to pollutants on footpaths in previous investigations. However, previous research has been limited to generic numerical modelling studies. This study combines real-time traffic data, meteorological conditions and pollution concentrations, in a real world urban street canyon before and after the implementation of a passive control system. Using a combination of field measurements and numerical modelling this study assessed the potential impact of passive controls on personal exposure to nitric oxide (NO) concentrations in the street canyon in winter conditions. A calibrated numerical model of the urban street canyon was developed, taking into account the variability in traffic and meteorological conditions. The modelling system combined the computational fluid dynamic (CFD) simulations and a semi-empirical equation, and demonstrated a good agreement with measured field data collected in the street canyon. The results indicated that lane distribution, fleet composition and vehicular turbulence all affected pollutant dispersion, in addition to the canyon geometry and local meteorological conditions. The introduction of passive controls displayed mixed results for improvements in air quality on the footpaths for different wind and traffic conditions. Parked cars demonstrated the most comprehensive passive control system with average improvements in air quality of up to 15% on the footpaths. This study highlights the potential of passive controls in a real street canyon to increase dispersion and improve air quality at street level. - Highlights: • Parked cars and LBWs were assessed as passive controls in an urban street canyon. • The calibrated model combined CFD
The city of Colombo is gradually being choked to death by motor traffic and urgently needs to implement a raft of economic measures to curb emissions. This is the verdict of a study that has attracted the attention of local policymakers. The study looked at the growth of traffic in the city and the impact it is having on air quality. It then analysed the feasibility and cost-effectiveness of different pollution reduction strategies. The main conclusions were that new pricing policies could he...
Getachew A. Adnew; Carl Meusinger; Nicolai Bork; Michael Gallus; Mildrid Kyte; Thomas Rosenørn; Johnson, Matthew S.; Vitalijs Rodins
Gas-phase advanced oxidation (GPAO) is an emerging air cleaning technology based on the natural self-cleaning processes that occur in the Earth’s atmosphere. The technology uses ozone, UV-C lamps and water vapor to generate gas-phase hydroxyl radicals that initiate oxidation of a wide range of pollutants. In this study four types of GPAO systems are presented: a laboratory scale prototype, a shipping container prototype, a modular prototype, and commercial scale GPAO installations. The GPAO s...
Jeffrey S. Gaffney
Full Text Available Atmospheric chemistry is an important discipline for understanding air pollution and its impacts. This mini-review gives a brief history of air pollution and presents an overview of some of the basic photochemistry involved in the production of ozone and other oxidants in the atmosphere. Urban air quality issues are reviewed with a specific focus on ozone and other oxidants, primary and secondary aerosols, alternative fuels, and the potential for chlorine releases to amplify oxidant chemistry in industrial areas. Regional air pollution issues such as acid rain, long-range transport of aerosols and visibility loss, and the connections of aerosols to ozone and peroxyacetyl nitrate chemistry are examined. Finally, the potential impacts of air pollutants on the global-scale radiative balances of gases and aerosols are discussed briefly.
He, Hao; Vinnikov, Konstantin Y.; Li, Can; Krotkov, Nickolay A.; Jongeward, Andrew R.; Li, Zhanqing; Stehr, Jeffrey W.; Hains, Jennifer C.; Dickerson, Russell R.
This paper addresses the questions of what effect local regulations can have on pollutants with different lifetimes and how surface observations and remotely sensed data can be used to determine the impacts. We investigated the decadal trends of tropospheric sulfur dioxide (SO2) and aerosol pollution over Maryland and its surrounding states, using surface, aircraft, and satellite measurements. Aircraft measurements indicated fewer isolated SO2 plumes observed in summers, a ˜40% decrease of column SO2, and a ˜20% decrease of atmospheric optical depth (AOD) over Maryland after the implementation of local regulations on sulfur emissions from power plants (˜90% reduction from 2010). Surface observations of SO2 and particulate matter (PM) concentrations in Maryland show similar trends. OMI SO2 and MODIS AOD observations were used to investigate the column contents of air pollutants over the eastern U.S.; these indicate decreasing trends in column SO2 (˜60% decrease) and AOD (˜20% decrease). The decrease of upwind SO2 emissions also reduced aerosol loadings over the downwind Atlantic Ocean near the coast by ˜20%, while indiscernible changes of the SO2 column were observed. A step change of SO2 emissions in Maryland starting in 2009-2010 had an immediate and profound benefit in terms of local surface SO2 concentrations but a modest impact on aerosol pollution, indicating that short-lived pollutants are effectively controlled locally, while long-lived pollutants require regional measures.
Arbex, Marcos Abdo; Santos, Ubiratan de Paula; Martins, Lourdes Conceição; Saldiva, Paulo Hilário Nascimento; Pereira, Luiz Alberto Amador; Braga, Alfésio Luis Ferreira
Over the past 250 years-since the Industrial Revolution accelerated the process of pollutant emission, which, until then, had been limited to the domestic use of fuels (mineral and vegetal) and intermittent volcanic emissions-air pollution has been present in various scenarios. Today, approximately 50% of the people in the world live in cities and urban areas and are exposed to progressively higher levels of air pollutants. This is a non-systematic review on the different types and sources of air pollutants, as well as on the respiratory effects attributed to exposure to such contaminants. Aggravation of the symptoms of disease, together with increases in the demand for emergency treatment, the number of hospitalizations, and the number of deaths, can be attributed to particulate and gaseous pollutants, emitted by various sources. Chronic exposure to air pollutants not only causes decompensation of pre-existing diseases but also increases the number of new cases of asthma, COPD, and lung cancer, even in rural areas. Air pollutants now rival tobacco smoke as the leading risk factor for these diseases. We hope that we can impress upon pulmonologists and clinicians the relevance of investigating exposure to air pollutants and of recognizing this as a risk factor that should be taken into account in the adoption of best practices for the control of the acute decompensation of respiratory diseases and for maintenance treatment between exacerbations. PMID:23147058
Although official efforts to control air pollution have traditionally focused on outdoor air, it is now apparent that elevated contaminant concentrations are common inside some private and public buildings. Concerns about potential public health problems due to indoor air pollution are based on evidence that urban residents typically spend more than 90 percent of their time indoors, concentrations of some contaminants are higher indoors than outdoors, and for some pollutants personal exposures are not characterized adequately by outdoor measurements. Among the more important indoor contaminants associated with health or irritation effects are passive tobacco smoke, radon decay products, carbon monoxide, nitrogen dioxide, formaldehyde, asbestos fibers, microorganisms, and aeroallergens. Efforts to assess health risks associated with indoor air pollution are limited by insufficient information about the number of people exposed, the pattern and severity of exposures, and the health consequences of exposures. An overall strategy should be developed to investigate indoor exposures, health effects, control options, and public policy alternatives
Ostro, Bart David
Since the passage of the environmental legislation in the early 1970's, critics have attacked these laws as being unnecessary and for contributing significantly to the problem of inflation in the United States. This paper is an attempt to put the inflationary costs of air pollution into perspective by considering them in light of the cost, especially to public health, of not proceeding with pollution control. There is now a great deal of evidence that the concentration of certain pollutants i...
Moses E EMETERE
Full Text Available Air pollution from cement factory is classified as one of the sources of air pollution. The control of the air pollution by addressing the wind field dynamics was the main objective of the paper. The dynamics of dispersion showed a three way flow which was calculated and explained accordingly. The 3D model showed good level of accuracy by determining field values of air deposited pollutants. Mean concentration of diffusing pollutants was shown to be directly proportional to the plume angular displacement. The 2D model explained the details of the wind field dynamics and proffers a solution which may be relevant in controlling air pollution from anthropogenic sources.
Air pollution, land price development and assessment of immission control needs in urban development plans. The impact of immission pollution by sulphur dioxide and dust precipitation on property prices in residential areas of Dortmund and Duisburg
Air pollution, land price development and assessment of immission control needs in urban development plans. The impact of immission pollution by sulphur dioxide and dust precipitation on property prices in residential areas of Dortmund and Duisburg. The focus of this thesis is on studying the links between property prices and air pollution. The ground rent theory which goes back to the 16th century provides the theoretical basis for this work. RICARDO put forward the theory, that air may, under certain circumstances, - as for instance different local air pollution levels or sensitivity of locals to air quality -, which did not apply 200 years ago actually produce rent. These circumstances do indeed apply widely today - different air pollution levels in urban areas are just a case in point. Various empiricial studies in the U.S. proved that air pollution with different substances does actually influence the value of property. The ground rent influenced by air pollution is called ''air rent''. This study contains empirical studies on the influence of air pollution by sulphur dioxide SO2 and dust precipitation on general property prices in residential areas of Dortmund between 1979 and 1989 and Duisburg between 1981 and 1989. (orig./UA)
Full Text Available The increase of air pollution over the years has major effects on the human skin. The skin is exposed to ultraviolet radiation (UVR and environmental air pollutants such as polycyclic aromatic hydrocarbons (PAHs, volatile organic compounds (VOCs, oxides, particulate matter (PM, ozone (O3 and cigarette smoke. Although human skin acts as a biological shield against pro-oxidative chemical and physical air pollutants, the prolonged or repetitive exposure to high levels of these pollutants may have profound negative effects on the skin. Exposure of the skin to air pollutants has been associated with skin aging and inflammatory or allergic skin conditions such as atopic dermatitis, eczema, psoriasis or acne, while skin cancer is among the most serious effects. On the other hand, some air pollutants (ie, ozone, nitrogen dioxide, and sulfur dioxide and scattering particulates (clouds and soot in the troposphere reduce the effects of shorter wavelength UVR and significant reductions in UV irradiance have been observed in polluted urban areas.
Zhongqiu Li; Franck Courchamp; Blumstein, Daniel T.
Air pollution, especially haze pollution, is creating health issues for both humans and other animals. However, remarkably little is known about how animals behaviourally respond to air pollution. We used multiple linear regression to analyse 415 pigeon races in the North China Plain, an area with considerable air pollution, and found that while the proportion of pigeons successfully homed was not influenced by air pollution, pigeons homed faster when the air was especially polluted. Our resu...
Sever air pollution in China has in recent years caused intensive public, media and governmental attention. Many questions need to be answered about the air pollution in China, such as how harmful is the air pollution, especially PM2.5? Why suddenly so many reports about sever air pollution, is the air in China getting more polluted? How to design a policy that can control the air pollution most efficiently? After updated the national Ambient Air Quality Standards in 2012 and included PM2.5 as one of the critical air pollutants, in 2013, Chinese central government released for the first time the "Air Pollution Prevention and Control Action Plan". The plan has set goals to reduce annual mean concentration of PM2.5 up to 25% in 2017 in different regions in China. If the ambitious goals were achieved, this could be the most significant air pollution reduction in such a short time that affects so many people in human history. To achieve these goals, however, there are enormous scientific and public policy challenges to deal with. For example: Identify the key components, size fraction of PM that have the largest health effects; and identify the sources of PM that has the most harmful effects on human health and ecosystem. Reduce the uncertainty in health risk assessment. Understand complicate chemical transformation processes in air pollution formation with intensive emissions from industry, power plant, vehicles, agriculture. Interactions between air pollution, PBL, and atmospheric circulation at different scales. The accountability, feasibility, effectiveness, and efficiency of air pollution control policies. Integrate multi-pollutant control and achieve co-benefit with climate and energy policy. Regional coordinated air pollution control. The largest challenge in China for air pollution control remains how to strength the link between science and policy.
Bleizgys, Rolandas; Bagdoniene, Indre
Experimental researches performed in manufacturing cowsheds have demonstrated a variation of ammonia concentration and the factors influencing this most during different periods of the year. The process of ammonia evaporation from manure is influenced by many varying and interrelated factors with temperature and the intensity of air ventilation being the most critical ones. The influence of these factors on the process of ammonia evaporation was established by laboratory researches. An increase in temperature results in an exponential increase in ammonia emission, whereas the dependence of the emission on the air velocity is best expressed by a second degree polynomial. The results obtained may be used as a forecast of the ammonia emissions from cowsheds during different periods of the year. Intensive ventilation is required for the removal of excess moisture from the housing, and this limits the possibilities to reduce ammonia emissions by controlling the intensity of ventilation. A reduction in the amount of ventilation is only recommended if the air quality indices meet the requirements applied to the housing. Better opportunities to reduce ammonia emissions are provided through management of the thermal processes in a cowshed. If the average annual air temperature (11.3°C) is reduced by one degree in a cubicle housing cowshed, the ammonia emissions will decrease by 10%. PMID:27350091
For more than 10 years, Argonne National Laboratory has supported the US DOE's Flue Gas Cleanup Program objective by developing new or improved environmental controls for industries that use fossil fuels. Argonne's pollutant emissions research has ranged from experiments in the basic chemistry of pollution-control systems, through laboratory-scale process development and testing, to pilot-scale field tests of several technologies. The work on air toxics is currently divided into two components: Investigating measures to improve the removal of mercury in existing pollution-control systems applied to coal combustion; and, Developing sensors and control techniques for emissions found in the textile industry
Full Text Available Abstract Background Few epidemiological studies of air pollution have used residential histories to develop long-term retrospective exposure estimates for multiple ambient air pollutants and vehicle and industrial emissions. We present such an exposure assessment for a Canadian population-based lung cancer case-control study of 8353 individuals using self-reported residential histories from 1975 to 1994. We also examine the implications of disregarding and/or improperly accounting for residential mobility in long-term exposure assessments. Methods National spatial surfaces of ambient air pollution were compiled from recent satellite-based estimates (for PM2.5 and NO2 and a chemical transport model (for O3. The surfaces were adjusted with historical annual air pollution monitoring data, using either spatiotemporal interpolation or linear regression. Model evaluation was conducted using an independent ten percent subset of monitoring data per year. Proximity to major roads, incorporating a temporal weighting factor based on Canadian mobile-source emission estimates, was used to estimate exposure to vehicle emissions. A comprehensive inventory of geocoded industries was used to estimate proximity to major and minor industrial emissions. Results Calibration of the national PM2.5 surface using annual spatiotemporal interpolation predicted historical PM2.5 measurement data best (R2 = 0.51, while linear regression incorporating the national surfaces, a time-trend and population density best predicted historical concentrations of NO2 (R2 = 0.38 and O3 (R2 = 0.56. Applying the models to study participants residential histories between 1975 and 1994 resulted in mean PM2.5, NO2 and O3 exposures of 11.3 μg/m3 (SD = 2.6, 17.7 ppb (4.1, and 26.4 ppb (3.4 respectively. On average, individuals lived within 300 m of a highway for 2.9 years (15% of exposure-years and within 3 km of a major industrial emitter for 6.4 years (32% of exposure-years. Approximately 50
Thamires Marques de Lima; Cristiane Mayumi Kazama; Andreas Rembert Koczulla; Hiemstra, Pieter S.; Mariangela Macchione; Ana Luisa Godoy Fernandes; Ubiratan de Paula Santos; Maria Lucia Bueno-Garcia; Dirce Maria Zanetta; Carmen Diva Saldiva de Andre; Paulo Hilario Nascimento Saldiva; Naomi Kondo Nakagawa
OBJECTIVE: To utilize low-cost and simple methods to assess airway and lung inflammation biomarkers related to air pollution. METHODS: A total of 87 male, non-smoking, healthy subjects working as street traffic-controllers or office-workers were examined to determine carbon monoxide in exhaled breath and to measure the pH in nasal lavage fluid and exhaled breath condensate. Air pollution exposure was measured by particulate matter concentration, and data were obtained from fixed monitoring ...
de Lima, Thamires Marques; Kazama, Cristiane Mayumi; Koczulla, Andreas Rembert; Hiemstra, Pieter S.; Macchione, Mariangela; Fernandes, Ana Luisa Godoy; de Paula Santos, Ubiratan; Bueno-Garcia, Maria Lucia; Zanetta, Dirce Maria; de André, Carmen Diva Saldiva; Saldiva, Paulo Hilario Nascimento; Nakagawa, Naomi Kondo
OBJECTIVE: To utilize low-cost and simple methods to assess airway and lung inflammation biomarkers related to air pollution. METHODS: A total of 87 male, non-smoking, healthy subjects working as street traffic-controllers or office-workers were examined to determine carbon monoxide in exhaled breath and to measure the pH in nasal lavage fluid and exhaled breath condensate. Air pollution exposure was measured by particulate matter concentration, and data were obtained from fixed monitoring st...
In the discussion on possible adverse effects of air pollution upon human health one has to distinguish between out-door and in-door environment. The most frequent pollutants in out-door air over industrialized areas are particulate substances, sulfur dioxide, nitrous oxide, carbonmonoxide, ozone and lead. Most of these substances have direct irritating effects on mucous surfaces. Hypersensitivity reactions have been described against sulfur dioxide and sulfites occurring as asthma, urticaria or anaphylactoid reactions. In-door air pollution is of much greater practical importance for a variety of diseases. Apart from physio-chemical irritants and microbial organisms leading to infections, organic allergens (e.g. house dust mites, moulds, animal epithelia) can induce a variety of allergic diseases via different pathomechanisms.
Flagan, Richard C.; Seinfeld, John H.
Analysis and abatement of air pollution involve a variety of technical disciplines. Formation of the most prevalent pollutants occurs during the combustion process, a tightly coupled system involving fluid flow, mass and energy transport, and chemical kinetics. Its complexity is exemplified by the fact that, in many respects, the simplest hydrocarbon combustion, the methane-oxygen flame, has been quantitatively modeled only within the last several years. Nonetheless, the development of combus...
World Heath Organization (WHO)
Metadata only record This is a fact sheet summarizing the indoor air pollution problem. The risk factors include health impacts such as respiratory infections and lung cancer. The fact sheet explains that women and children in developing nations are most vulnerable to the pollutants. It links Millennium Development Goals 1, 3, 4 and 7 (eradicate extreme poverty, empowering women, reducing child mortality, and ensure environmental sustainability) with the need for action. The fact sheet end...
A report on air quality and contribution of individual sources on its pollution in the Slovak Republic in 2001 is presented. This report consists of two parts: (1) Ambient air and (2) Emission. Ambient air part is divided into the following chapters: Regional air pollution and quality of precipitation; Local air pollution; Atmospheric ozone. Emission part is divided into the following chapters: Emission and air pollution source inventory, Greenhouse gas emissions
Hall, J; Gilligan, A; Schimmel, T; Cecchi, M; Cohen, J
Testing shows that most laboratories conducting human gamete and embryo culture have air quality and sources of contamination that exceed the levels measured in homes, businesses and schools. The sources of these contaminants have been shown to be either from activities outside the laboratory, or emitted from materials used in the facility, such as compressed gas, cleaning and sterilizing agents, plastic and stored materials. Both the laboratory structure and the air handling systems may affect the air composition. The significance of these findings is being validated by the accumulation of field case studies and now by assay procedures. Products given off by road sealant were shown to have accumulated in one of the examined laboratories, adjacent to a large re-surfaced parking area. Aldehydes such as acrolein, hexanal, decanal, pentanal and others were detected at elevated concentrations that were statistically significant. Since it is not appropriate to add potentially suspect chemicals to human embryos, we used a mouse-model to study the effect of acrolein. The growth of mouse embryos was significantly affected after acrolein was added at different concentrations to the culture environment. The physiological effect was noted at concentrations in the low ppm range. The testing end-point of embryo death must still be considered to be a crude basis for evaluating toxicological effects, since it involves addition of compounds to culture media and unprotected growth until the blastocyst stage. The findings may, however, support observations of decreased pregnancy rate following exposure of human embryos to aldehydes or other adverse conditions. With proper engineering and material selection, it is possible to reduce such contamination. The usefulness of this approach for controlling aldehydes has been demonstrated by decreasing levels in the laboratory to below those of the outside air. PMID:10091065
A new smartphone application takes advantage of various technological capabilities and sensors to help users monitor air quality. Tapping into smartphone cameras, Global Positioning System (GPS) sensors, compasses, and accelerometers, computer scientists with the University of Southern California's (USC) Viterbi School of Engineering have developed a new application, provisionally entitled “Visibility.” Currently available for the Android telephone operating system, the application is available for free download at http://robotics.usc.edu/˜mobilesensing/Projects/AirVisibilityMonitoring. An iPhone application may be introduced soon. Smartphone users can take a picture of the sky and then compare it with models of sky luminance to estimate visibility. While conventional air pollution monitors are costly and thinly deployed in some areas, the smartphone application potentially could help fill in some blanks in existing air pollution maps, according to USC computer science professor Gaurav Sukhatme.
Rössner ml., Pavel; Binková, B.; Rössnerová, Andrea; Šrám, Radim
Rieka: InTech, 2015 - (Nejadkoorki, F.), s. 609-643 ISBN 978-953-51-2180-0 R&D Projects: GA ČR GA13-13458S Institutional support: RVO:68378041 Keywords : molecular epidemiology * biomarkers * human populations * in vitro studies Subject RIV: DN - Health Impact of the Environment Quality http://www.intechopen.com/books/current-air-quality-issues/molecular-epidemiology-and-air- pollution
Kumar, Prashant; Khare, Mukesh; Harrison, Roy M.; Bloss, William J.; Lewis, Alastair C.; Coe, Hugh; Morawska, Lidia
Most major cities around the world experience periods of elevated air pollution levels, which exceed international health-based air quality standards (Kumar et al., 2013). Although it is a global problem, some of the highest air pollution levels are found in rapidly expanding cities in India and China. The sources, emissions, transformations and broad effects of meteorology on air pollution are reasonably well accounted in air quality control strategies in many developed cities; however these key factors remain poorly constrained in the growing cities of countries with emerging economies. We focus here on Delhi, one of the largest global population centres, which faces particular air pollution challenges, now and in the future.
Wong, Ping-hei, Benny; 黃丙熙
Air pollution is a major environmental problem that poses numerous health risks to those exposed to it. The adverse health effects are compounded in a place as dense as Hong Kong and further intensified due to its proximity to industrial and manufacturing plants across the border in Mainland China. Hong Kong has attempted to address the issue of air pollution through the enactment of legislation and policies such as the 1983 Air Pollution Control Ordinance and Air Quality Objectives, but so f...
Liu Zhaoyang; Mao Xianqiang; Liu Shengqiang; Kevin Jianjun TU
China is currently facing a major air pollution challenge and must make significant reductions in its emissions of conventional air pollutants (AP) and greenhouse gases (GHGs). This is especially the case for the iron and steel sector, which is one of country's biggest polluters. To help find the best way to address this problem, this study has looked at policies that will help reduce both GHGs and APs at the same time - so called, co-control policies. The study finds that a carbon tax regime...
An, Sukheon; Nishida, Osami
It is the purpose of this paper to introduce the usage of seawater and its electrolysis for the exhaust emission control in marine diesel engines. First, with using only seawater that is naturally alkaline (pH typically around 8.1), the SO2 and SO3 are absorbed by relatively high solubility compared to other components of exhaust pollutants, and PMs (Particulate Matter) are removed through direct contact with the sprayed seawater droplets. Besides, the electrolyzed alkaline seawater by electrolysis, which contains mainly NaOH together with alkali metal ions (i. e. Na+, Mg2+, Ca2+), is used as the absorption medium of NOx and CO2. Conditionally, before the NOx absorption treatment with using the alkaline seawater, nitric oxide (NO) must be adequately oxidized to nitrogen dioxide (NO2) by the acidic seawater in order to increase NOx absorption rate into the alkaline seawater. Because NOx absorption is the most suited to conditions when both volume fractions (NO: NO2 ratio) are of equal portions. Finally, this research would also plan to treat the effluent by applying electro-dialysis and electro-flotation techniques in the future. The way to reduce emissions from the marine diesel engines is to make it attractive from an operating perspective, as well as an environmental perspective.
Wang J., Zhang X.
Object and goals of indoor air pollution control with ventilation may influence improvement of indoor air quality, building energy consumption and even carbon emissions. Indicators of indoor air pollution caused by occupants-related sources and building-related sources were chosen based on sources emitting characteristics, pollutants composition, indicator choosing principles and indoor air pollution situation in China. Then the recommended concentration limits of indicators were given for un...
X. Jiang; Hong, C; Zheng, Y.; Zheng, B.; Guan, D; Gouldson, AP; Zhang, Q.; K. He
Following a series of extreme air pollution events, the Chinese government released the Air Pollution Prevention and Control Action Plan in 2013 (China's State Council 2013). The Action Plan sets clear goals for key regions (i.e. cities above the prefecture level, Beijing-Tianjin-Hebei Province, the Yangtze River Delta and the Pearl River Delta) and establishes near-term control efforts for the next five years. However, the extent to which the Action Plan can direct local governments' activit...
Full Text Available Once considered a taboo topic or stigma, cancer is the number one public health enemy in the world. Once a product of an almost untouchable industry, tobacco is indisputably recognized as a major cause of cancer and a target for anticancer efforts. With the emergence of new economic powers in the world, especially in highly populated countries such as China, air pollution has rapidly emerged as a smoking gun for cancer and has become a hot topic for public health debate because of the complex political, economic, scientific, and technologic issues surrounding the air pollution problem. This editorial and the referred articles published in this special issue of the Chinese Journal of Cancer discuss these fundamental questions. Does air pollution cause a wide spectrum of cancers? Should air pollution be considered a necessary evil accompanying economic transformation in developing countries? Is an explosion of cancer incidence coming to China and how soon will it arrive? What must be done to prevent this possible human catastrophe? Finally, the approaches for air pollution control are also discussed
Although some air pollution modeling studies examine events that have already occurred (e.g., the Chernobyl plume) with relevant meteorological conditions largely known, most pollution modeling studies address expected or potential scenarios for the future. Future meteorological conditions, the major pollutant forcing function other than emissions, are inherently uncertain although much relevant information is contained in past observational data. For convenience in our discussions of regional pollutant variability unrelated to emission changes, we define meteorological variability as short-term (within-season) pollutant variability and climatological variability as year-to-year changes in seasonal averages and accumulations of pollutant variables. In observations and in some of our simulations the effects are confounded because for seasons of two different years both the mean and the within-season character of a pollutant variable may change. Effects of climatological and meteorological variability on means and distributions of air pollution parameters, particularly those related to regional visibility, are illustrated. Over periods of up to a decade climatological variability may mask or overstate improvements resulting from emission controls. The importance of including climatological uncertainties in assessing potential policies, particularly when based partly on calculated source-receptor relationships, is highlighted
Oudin, Anna; Stroh, Emilie; Strömberg, Ulf; Jakobsson, Kristina; Björk, Jonas
Background Long-term exposure to air pollution is a hypothesized risk factor for ischemic stroke. In a large case-control study with a complete study base, we investigated whether hospital admissions for ischemic stroke were associated with residential concentrations of outdoor NOx, as a proxy for exposure to air pollution, in the region of Scania, Southern Sweden. Methods We used a two-phase case-control study design, including as first-phase controls all individuals born between 1923 and 19...
In most urban areas in Europe and Northern America serious corrosion impacts on buildings and cultural monuments have been caused by emissions of pollutants. The rapidly increasing pollution levels in many of the developing countries also exert a serious threat to materials. Beside the very important role of SO2 also the direct or synergistic effect of NOx and O3, the particulates and rain acidity may contribute in an import...
Aerosols were monitored in Greater Copenhagen in the period June 1973 to July 1974. Size-fractionated cascade impactor samples and unfractionated filter samples were regularly collected and analyzed be neutron activation analysis, spark emission spectroscopy or proton-induced X-ray emission spectroscopy. Concentrations were determined of the following elements: Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Mo, Cd, Sn, Sb, and Pb. All elements showed orders-of-magnitude fluctuationsthe mean concentrations were roughly the same as in other large cities. In relation to proposed air quality standards, Pb was the most critical component. Statistical analysis of variation patterns, size distributions and interelement correlations indicate that automotive exhaust is the source of Br and Pbfuel-oil combustion is the main source of V and Ni (and partly of S)soil dust raised by wind or by human activity (e.g. traffic) is the main source of Al, Si, Ca, Ti, and Fe. (author)
In most urban areas in Europe and Northern American serious corrosion impacts on buildings and cultural monuments have been caused by emissions of pollutants. The rapidly increasing pollution levels in many of the developing countries also exert a serious threat to materials. Beside the very important role of SO2 also the direct or synergistic effect of NO2 and O3, the particulates and rain acidity may contribute in an important way to materials degradation. Results from extensive international field exposure programmes i. e. within the UN/ECE have enabled development of dose-response relations which describe the effect of dry and wet deposition of pollutants on corrosion of different material groups. In most of the industrialized countries decreasing trends of sulphur and nitrogen pollutants and of acidity of precipitation have resulted in decreased corrosion rates. The concept of acceptable levels of pollutants is a useful tool in planning of abatement strategies and for defining of conditions for a suitable development in the field of corrosion of construction in the atmosphere. (Author) 12 refs
Junfeng Zhang; Lioy, Paul J.
The air pollution problem can be depicted as a system consisting of several basic components: source, concentration, exposure, dose, and adverse effects. Exposure, the contact between an agent (e.g., an air pollutant) and a target (e.g., a human respiratory tract), is the key to linking the pollution source and health effects. Human exposure to air pollutants depends on exposure concentration and exposure duration. Exposure concentration is the concentration of a pollutant at a contact bounda...
Hobbs, Peter V.
This article investigates the mechanism for those layers in the atmosphere that are free of air borne pollution even though the air above and below them carry pollutants. Atmospheric subsidence is posed as a mechanism for this phenomenon.
... nih.gov/medlineplus/news/fullstory_158558.html Mild Air Pollution of Concern in Pregnancy Study found risk for ... Being exposed to just a small amount of air pollution during pregnancy ups the risk of a pregnancy ...
... High Blood Pressure Tools & Resources Stroke More Air Pollution and Heart Disease, Stroke Updated:Aug 30,2016 ... routine or in a less populated place, tiny pollution particles in the air can lead to big ...
Sørensen, Mette Abildgaard; Bender-Koch, C.; Starckpoole, M. M.;
Stabilization of air pollution control residues by coprecipitation with ferrous iron and subsequent thermal treatment (at 600 and 900 °C) has been examined as a means to reduce heavy metal leaching and to improve product stability. Changes in mineralogy and metal binding were analyzed using various...... analytical and environmental techniques. Ferrihydrite was formed initially but transformed upon thermal treatment to more stable and crystalline iron oxides (maghemite and hematite). For some metals leaching studies showed more substantial binding after thermal treatment, while other metals either....... Thermal treatment of the stabilized residues produced structures with an inherently better iron oxide stability. However, the concentration of metals in the leachate generally increased as a consequence of the decreased solubility of metals in the more stable iron oxide structure....
This paper discusses air pollution models used in regional development planning in Poland. After outlining the institutional structure and legislature dealing with air pollution control, the paper describes the air quality standards currently in effect. Dispersion models used in predicting air pollution concentrations are then detailed. Finally the application of air pollution modelling to urban design is discussed.
In this study, an IFJMP (interval-parameter full-infinite joint-probabilistic mixed-integer programming) method is developed for supporting EPS (electric power systems) management. The IFJMP-EPS model cannot only deal with uncertainties expressed as joint probabilities, crisp interval values and functional intervals, but also examine the risk of violating joint-probabilistic constraints. The developed IFJMP-EPS model is then applied to a case study for planning EPS of Beijing within a multi-energy resource, multi-electric power plant and multi-period context, where MILP (mixed integer linear programming technique is employed to facilitate dynamic analysis for decisions of facility-capacity expansion. With the aid of IFJMP, tradeoffs among system costs, electricity-supply security, and air-pollution control can be obtained under joint probabilities. The results can be used to help managers to identify desired system designs and to determine which of these designs can most efficiently accomplish optimizing the system objective under uncertainty. The results can also address the challenges generated in the processes of electric-power production (such as imbalance between electricity supply and demand, the contradiction between air pollution emission and environmental protection); this allows an increased robustness in controlling electricity-generation and -supply risk for Beijing's EPS under various complexities and uncertainties. - Highlights: • An innovative optimization method is developed for tackling uncertainties. • It can reflect the risk of violating system constraints under joint probability. • The developed method is applied to planning electric power systems of Beijing. • Solutions related to electricity supply and capacity expansion are obtained. • Results can generate the city's energy policy to satisfy different objectives
Hu, Guoping; Zhong, Nanshan; Ran, Pixin
Recently, many researchers paid more attentions to the association between air pollution and chronic obstructive pulmonary disease (COPD). Haze, a severe form of outdoor air pollution, affected most parts of northern and eastern China in the past winter. In China, studies have been performed to evaluate the impact of outdoor air pollution and biomass smoke exposure on COPD; and most studies have focused on the role of air pollution in acutely triggering symptoms and exacerbations. Few studies...
Despite substantial regulations for nearly two decades, attainment of this ambient standards for ozone and carbon monoxide (CO) remain difficult goals to achieve, Even with of ozone precursors and CO. The 1990 Amendments to the Clean Air Act (CAA90) prescribe further reductions of mobile source emissions. One such reduction strategy is using clean fuels, such as methanol, ethanol, or other alcohols (in blends of 85 percent or more alcohol with gasoline or other fuel), reformulated gasoline or diesel, natural gas, liquified petroleum gas, hydrogen, or electricity. There are regulatory measures involving special fuels which will be required in areas heavily polluted with ozone and CO. The state of Colorado recently passed the 1992 Air Pollution Prevention and Control Act which included provisions for the use of alternative fuels which will be implemented in 1994. In addition to adhering to the Colorado state regulations, the city and county of Denver also have regulations pertaining to the use of alternative fuels in fleets of 10 or more vehicles. Denver's program began in 1992. This paper will address the issue of fleet conversion and its impact on industry in Colorado, and Denver in particular
Krysztofiak, G.; Catoire, V.; Dorf, M.; Grossmann, K.; Hamer, P. D.; Marécal, V.; Reiter, A.; Schlager, H.; Eckhardt, S.; Jurkat, T.; Oram, D.; Quack, B.; Atlas, E.; Pfeilsticker, K.
During the SHIVA (Stratospheric Ozone: Halogen Impacts in a Varying Atmosphere) campaign in Nov. and Dec. 2011 a number of polluted air masses were observed in the marine and terrestrial boundary layer (0 - 2 km) and in the free troposphere (2 - 12 km) over Borneo/Malaysia. The measurements include isoprene, CO, CO2, CH4, N2O, NO2, SO2 as primary pollutants, O3 and HCHO as secondary pollutants, and meteorological parameters. This set of trace gases can be used to fingerprint different sources of local and regional air pollution (e.g., biomass burning and fossil fuel burning, gas flaring on oil rigs, emission of ships and from urban areas, volcanic emissions, and biogenic emissions). Individual sources and location can be identified when the measurements are combined with a nested-grid regional scale chemical and meteorological model and lagrangian particle dispersion model (e.g., CCATT-BRAMS and FLEXPART). In the case of the former, emission inventories of the primary pollutants provide the basis for the trace gas simulations. In this region, the anthropogenic influence on air pollution seems to dominate over natural causes. For example, CO2 and CH4 often show strong correlations with CO, suggesting biomass burning or urban fossil fuel combustion dominates the combustion sources. The study of the CO/CO2 and CH4/CO ratios can help separate anthropogenic combustion from biomass burning pollution sources. In addition, these ratios can be used as a measure of combustion efficiency to help place the type of biomass burning particular to this region within the wider context of fire types found globally. On several occasions, CH4 enhancements are observed near the ocean surface, which are not directly correlated with CO enhancements thus indicating a non-combustion-related CH4 source. Positive correlations between SO2 and CO show the anthropogenic influence of oil rigs located in the South China Sea. Furthermore, SO2 enhancements are observed without any increase in CO
Full text: Chile, in general, and Santiago, its capital city, in particular, has serious air pollution problems mainly in winter time when the pollutants could reach dangerous levels which might be detrimental to older people and children. A project was undertaken within the framework of a Co-ordinated Research Programme (CRP) supported by the International Atomic Energy Agency (IAEA) to carry out a long term study on atmospheric air pollution in Chile using biomonitors. The present paper describes the activities carried out within this CRP. The lichens, collected in clean areas (native forests), were transplanted to selected sites in Santiago and exposed during three and six months. At a second stage, samples of Tillandsia recurvata were collected in the Metropolitan Area. All samples were carefully cleaned, using only clean plastic materials, milled at liquid nitrogen temperature, freeze dried, re-homogenized and stored at low temperature until analysis. The samples were mainly analysed by INAA, RNAA SS-AAS and ASV. As part of the routine QA/QC programme, analytical laboratories involved in the project participated in intercomparison runs organized by the IAEA for the determination of trace and minor elements in two lichens samples. From the data and its subsequent mapping over the area under study, it was possible to identify places exposed to higher amounts of some elements. Of interest are also the correlations between several elements, perhaps indicating a given source of pollutants. The results indicate the usefulness of biomonitoring air pollution using lichens and Tillandsias, which, jointly with multielemental analytical techniques, such as NAA, open the possibility to study extensive areas without the infrastructure needed for conventional APM sample collection and at reduced costs. (author)
Parkway School District, Chesterfield, MO.
This unit, designed for senior high school students, focuses on air pollution by examining its effect on man, plants and animals, the causes of air pollution, and possible solutions to the air pollution problems. It approaches each of these topics through both natural science and social science perspectives. The unit is divided into seven separate…
Seaports are major hubs of economic activity and of environmental pollution in coastal urban areas. Due to increasing global trade, transport of goods through ports has been steadily increasing and will likely continue to increase in the future. Evaluating air pollution impacts of ports requires consideration of numerous sources, including marine vessels, trucks, locomotives, and off-road equipment used for moving cargo. The air quality impacts of ports are significant, with particularly large emissions of diesel exhaust, particulate matter, and nitrogen oxides. The health effects of these air pollutants to residents of local communities include asthma, other respiratory diseases, cardiovascular disease, lung cancer, and premature mortality. In children, there are links with asthma, bronchitis, missed school days, and emergency room visits. The significance of these environmental health impacts requires aggressive efforts to mitigate the problem. Approaches to mitigation encompass a range of possibilities from currently available, low-cost approaches, to more significant investments for cleaner air. Examples of the former include restrictions on truck idling and the use of low-sulfur diesel fuel; the latter includes shore-side power for docked ships, and alternative fuels. A precautionary approach to port-related air pollution would encourage local production of goods in order to reduce marine traffic, greener design for new terminals, and state-of-the art approaches to emissions-control that have been successfully demonstrated at ports throughout the world
D’Amato, Gennaro; Bergmann, Karl Christian; Cecchi, Lorenzo; Annesi-Maesano, Isabella; Sanduzzi, Alessandro; Liccardi, Gennaro; Vitale, Carolina; Stanziola, Anna; D’Amato, Maria
Summary The observational evidence indicates that recent regional changes in climate, particularly temperature increases, have already affected a diverse set of physical and biological systems in many parts of the world. Allergens patterns are also changing in response to climate change and air pollution can modify the allergenic potential of pollen grains especially in the presence of specific weather conditions. Although genetic factors are important in the development of asthma and allergi...