WorldWideScience

Sample records for actinide compounds

  1. Photoelectron spectra of actinide compounds

    A brief overview of the application of photoelectron spectroscopy is presented for the study of actinide materials. Phenomenology as well as specific materials are discussed with illustrative examples

  2. Superconductivity in rare earth and actinide compounds

    Rare earth and actinide compounds and the extraordinary superconducting and magnetic phenomena they exhibit are surveyed. The rare earth and actinide compounds described belong to three classes of novel superconducting materials: high temperature, high field superconductors (intermetallics and layered cuprates); superconductors containing localized magnetic moments; heavy fermion superconductors. Recent experiments on the resistive upper critical field of high Tc cuprate superconductors and the peak effect in the critical current density of the f-electron superconductor CeRu2 are discussed. (orig.)

  3. Spin and orbital moments in actinide compounds

    Lebech, B.; Wulff, M.; Lander, G.H.

    1991-01-01

    -electron band-structure calculations, is that the orbital moments of the actinide 5f electrons are considerably reduced from the values anticipated by a simple application of Hund's rules. To test these ideas, and thus to obtain a measure of the hybridization, we have performed a series of neutron scattering...... experiments designed to determine the magnetic moments at the actinide and transition-metal sublattice sites in compounds such as UFe2, NpCo2, and PuFe2 and to separate the spin and orbital components at the actinide sites. The results show, indeed, that the ratio of the orbital to spin moment is reduced as...

  4. Magnetic form factor studies of actinide compounds

    Some results obtained at ILL on Actinide compound form factors are reviewed. In the paramagnetic NpO2 single crystal (5mg), an induced magnetic moment of 0.07μsub(B) was obtained at 4.2K (4.6T). In the ferromagnetic phase of NpAs2 single crystal (0.2mm3), the magnetic moment (1.46μsub(B)/Np atom) has been found fixed along the [001] direction. In both cases, the Np form factors fit satisfactorily the Np4+ form factor calculated with relativistic atomic wave functions. The Fermi length for Np was deduced (b(Np) = 1.015(15)10-12cm). In the paramagnetic Laves phase UNi2 compound, equally small moments are observed on U atom (0.013(1)μsub(B)) and on Ni atom (0.016(1)μsub(B)) confirming important changes in 3d band structure of Ni by hybridization with U electrons

  5. Cerium compounds in the fashion of the light actinides

    Researchers familiar with the light actinides easily recognize in cerium compounds a microcosm of the rich variety of properties seen in the light actinides. The parallelism seen between comparable cerium and actinide compounds strongly suggests that the same physical models are applicable. The most significant is the relative size of the f-orbital. Localization is generally tighter in Ce compounds than uranium compounds, making Ce roughly analogous to Np through Am. A way to see the actinide parallelism is to compare Hill plots. Compounds in the different regions of the plots (representing different physics) are isostructural compounds with the same companion (B) elements. The most common materials exhibiting a direct f-f interaction are the cubic Laves compounds. Accordingly, we have determined the band structures of CeRu2, CeRh2, CeIr2, CeOs2, and CeNi2. Compounds illustrative of the interaction of f-orbitals with ligand orbitals are the Cu3Au structured materials. Materials calculated in this class are CeRh3, CePd3, and CeSn3 - the materials of much interest as mixed valent. Although the focus is on the Ce compounds, calculations performed on uranium isomorphs are used to highlight the interesting physics

  6. Prediction of thermodynamic properties of actinide and lanthanide compounds

    LU Chunhai; NI Shijun; SUN Ying; CHEN Wenkai; ZHANG Chengjiang

    2008-01-01

    Several relationship models for thermodynamic functions of actinide and lanthanide compounds are built. The descriptors such as the difference of atomic radii between metal atoms and nonmetal atoms and the molecular mass are used in quantitative structure-activity/property relationships. The relative errors for entropy and heat capacity are less than 20% in the majority of gaseous compounds. Similar results are obtained from solid compounds.

  7. Synthesis and structural characterization of actinide oxalate compounds

    Oxalic acid is a well-known reagent to recover actinides thanks to the very low solubility of An(IV) and An(III) oxalate compounds in acidic solution. Therefore, considering mixed-oxide fuel or considering minor actinides incorporation in ceramic fuel materials for transmutation, oxalic co-conversion is convenient to synthesize mixed oxalate compounds, precursors of oxide solid solutions. As the existing oxalate single crystal syntheses are not adaptable to the actinide-oxalate chemistry or to their manipulation constrains in gloves box, several original crystal growth methods were developed. They were first validate and optimized on lanthanides and uranium before the application to transuranium elements. The advanced investigations allow to better understand the syntheses and to define optimized chemical conditions to promote crystal growth. These new crystal growth methods were then applied to a large number of mixed An1(IV)-An2(III) or An1(IV)-An2(IV) systems and lead to the formation of the first original mixed An1(IV)-An2(III) and An1(IV)-An2(IV) oxalate single crystals. Finally thanks to the first thorough structural characterizations of these compounds, single crystal X-ray diffraction, EXAFS or micro-RAMAN, the particularly weak oxalate-actinide compounds structural database is enriched, which is essential for future studied nuclear fuel cycles. (author)

  8. Organometallic compounds of the lanthanides, actinides and early transition metals

    This book provides a reference compilation of physical and biographical data on over 1500 of the most important and useful organometallic compounds of the lanthanides, actinides and early transition metals representing 38 different elements. The compounds are listed in molecular formula order in a series of entries in dictionary format. Details of structure, physical and chemical properties, reactions and key references are clearly set out. All the data is fully indexed and a structural index is provided. (U.K.)

  9. Non-compound nucleus fission in actinide and pre-actinide regions

    R Tripathi; S Sodaye; K Sudarshan

    2015-08-01

    In this article, some of our recent results on fission fragment/product angular distributions are discussed in the context of non-compound nucleus fission. Measurement of fission fragment angular distribution in 28Si+176Yb reaction did not show a large contribution from the non-compound nucleus fission. Data on the evaporation residue cross-sections, in addition to those on mass and angular distributions, are necessary for better understanding of the contribution from non-compound nucleus fission in the pre-actinide region. Measurement of mass-resolved angular distribution of fission products in 20Ne+232Th reaction showed an increase in angular anisotropy with decreasing asymmetry of mass division. This observation can be explained based on the contribution from pre-equilibrium fission. Results of these studies showed that the mass dependence of anisotropy may possibly be used to distinguish pre-equilibrium fission and quasifission.

  10. Hybridization effects in selected actinides and their compounds

    El-Khatib, Sami T.

    Many actinide systems exhibit 'unusual' phenomena that differ from the normal text-book behavior. This occurs because the 5f electrons of the actinides and their compounds experience a delicate balance between local-moment and itinerant magnetism. It is well established that strong-electron correlations affect the different properties in such systems. Even though the actinides and their compounds have been extensively studied in recent decades, both experimentally and theoretically, to date, no complete understanding of the full range of their properties has been achieved. My thesis focuses mainly on understanding the role of 5f electrons and their interactions with the electron states of the surrounding ligands. Particularly, the effect of the 5f-ligand hybridization in the development of bulk properties is investigated. The experimental studies utilized macroscopic techniques, such as magnetization, electrical-resistivity, specific-heat and resonant-ultrasound-spectroscopy measurements, as well as microscopic techniques, such as neutron-diffraction and muon-spin-resonance studies. The results are used to disentangle the importance of direct 5f--5f overlap and 5 f-ligand hybridization. The following features have been investigated in this thesis: (a) the dual nature of hybridization effects (magnetic moment reduction vs. exchange mediation) was studied for two isostructural uranium compounds U2Pd2Sn and U2Ni2 In; (b) the formation of complex magnetic structures and its connection to the hybridization effects was studied for UCuSn, UPdSn and UPdGe; (c) the tuning of the hybridization to critical values through substitutions was attempted for two single crystals of UCoAl1-xSn x and UNi1-xRh xAl alloys; (d) the effects of compositional deficiencies was studied for the copper-deficient compound in UCu1.5Sn 2; and finally, (e) the influence of strong electron correlations on the elastic properties was studied in the case of alpha-Pu.

  11. The chemical thermodynamics of actinide elements and compounds

    This compilation forms the twelfth part of a comprehensive assessment and selection of actinide thermodynamic data. The other parts of the compilation deal mostly with actinide elements and compounds. This part, which is the last one to be published in this Series, concerns inorganic actinide complexes in aqueous solution. The properties considered include the stability constant as a function of ionic strength and temperature and, whenever possible, enthalpy and entropy values. The present assessment is based on a literature survey that was terminated in early 1989. In tabulating literature data, only experimental results were used; estimates as well as recalculated data were ignored. Unlike in previous assessments of this kind in this assessment the selection of a best value is discussed and justified, and reasons are given for the rejection of data. In addition, our estimates of the thermodynamic properties, based on interrelationships between analogous systems, are given when this can be done reliably. Another essential aim of this assessment is to indicate those areas in which additional research is required. Refs

  12. Basic research on solvent extraction of actinide cations with diamide compounds

    Sasaki, Yuji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-11-01

    Newly synthesized 4 diamide compounds were tested for solvent extraction of actinide cations. It is obvious that N,N`-dimethyl-N,N`-dihexyl-3-oxapentanediamide (DMDHOPDA) can extract Eu(III), Th(IV), U(VI), Np(V), and Am(III) into organic solvent. Other 3 diamides hardly extract actinide ions, which is supposed that the reasons come from the difference of their chemical structures. In the synergistic extraction with a diamide and thenoyltrifluoroacetone (TTA), all diamides work as a extractant. Furthermore, by examining extracted species, it was confirmed that there are 4 kinds of chemical species of actinides with diamide and TTA. Finally, the mutual separation method of actinide (III), (IV), (V) and (VI) ions by solvent extraction using DMDHOPDA and TTA were developed. (author). 147 refs.

  13. Basic research on solvent extraction of actinide cations with diamide compounds

    Newly synthesized 4 diamide compounds were tested for solvent extraction of actinide cations. It is obvious that N,N'-dimethyl-N,N'-dihexyl-3-oxapentanediamide (DMDHOPDA) can extract Eu(III), Th(IV), U(VI), Np(V), and Am(III) into organic solvent. Other 3 diamides hardly extract actinide ions, which is supposed that the reasons come from the difference of their chemical structures. In the synergistic extraction with a diamide and thenoyltrifluoroacetone (TTA), all diamides work as a extractant. Furthermore, by examining extracted species, it was confirmed that there are 4 kinds of chemical species of actinides with diamide and TTA. Finally, the mutual separation method of actinide (III), (IV), (V) and (VI) ions by solvent extraction using DMDHOPDA and TTA were developed. (author). 147 refs

  14. Semi-microdetermination of nitrogen in actinide compounds by Dumas method

    This report describes the application of the Dumas method for the semi-micro determination of nitrogen in actinide compounds and actinide complexes with organic ligands. The usual set up has been modified to make it adaptable for glove box operations. The carbon dioxide generator and nitrometer assemblies were located outside the glove box while the reaction tube and combustion furnaces were housed inside. The nitrogen gas collected in the nitrometer was read with the help of a travelling microscope with a vernier attachment fitted in front of the nitrometer burette. The set up was standardised using acetanilide and employed for the determination of nirtogen in various substances such as uranium nitride, and a variety of substituted quinoline and pyrazolone derivatives of actinides as well as some ternary uranium-PMBR-sulphoxide complexes. Full details of the technique and the analytical data obtained are contained in this report. (author)

  15. Hydroxyaromatic compounds of tantalum, tungsten, and the lighter actinides

    Some hydroxyaromatic compounds of the elements tantalum, tungsten, thorium and uranium were prepared as well as the basic materials for these synthesis processes, i.e. metal halides and metal alkoxides. The hydroxyaromatic compounds were studied by elemental analysis, IR spectroscopy, 1H-NMR spectroscopy (if soluble in suitable solvents) and, in some cases, by X-ray fine structure analysis. (orig./EF)

  16. Relations between structural and magnetic properties of actinide oxidic compounds

    In the present work ternary oxides of Pr(IV), U(VI), Np(IV) and Np(VI) have been synthesized and investigated by X-ray-, spectroscopic and magnetic methods. In the case of Pr(IV), the paramagnetic ion was diluted with the diamagnetic Ce(IV) to perform EPR studies. In all compounds with metal ions with the f1-electronic configuration, the central ion shows a distorted octahedral coordination. The experimental effective magnetic moments are lower than the theoretical value for a f1-system in an ideal octahedral symmetry. This leads to the conclusion, that the covalent part of the bond between the central ion and oxygen can not be neglected in the investigated compounds. Magnetic ordering phenomena can be correlated definitely with the existence of An-O-An-chains in the lattice at least in one direction. The experimental data support the assumption of a critical An-An-spacing. In compounds with An-An-distances greater than the critical value no magnetic ordering was observed within the investigated temperature range. In NpGeO4 with eightfold coordination of the 5f3-electronic system, the Np-O-Np-chains are not linear. The angle of the O-Np-O-bonds seems to favour orbital overlapping, as the compound orders magnetically with a Np-Np-distance above the critical value. On some Np-compounds, Moessbauer studies were performed in the Institute of Experimental Nuclear Physics of the University of Karlsruhe. The results confirm the suggested structural and magnetic properties. (orig./RB)

  17. The pressure-induced transformation B1 to B2 in actinide compounds

    The phase transformation from NaCl structure (B1) to CsCl structure (B2) in actinide compounds has been studied using X-ray powder diffraction in the pressure range up to about 60 GPa. It is shown that the transition is sluggish, has a strong hysteresis and is accompanied with a volume change in the range 8-12%. These features are similar to those of the corresponding transition in the alkali halides and other compounds, indicating a common mechanism for the transformation as concerns the lattice geometry. (orig.)

  18. Ultrasoft x-ray resonance emission bands of lanthanide and actinide compounds

    A study is reported of the ultrasoft emission spectra of some lanthanide and actinide compounds at a low accelerating voltage in the X-ray tube: a strong and wide emission band was observed in the region of the giant resonance. The following results are shown: the lanthanum emission spectra in La2O3 obtained at accelerating voltages of 4, 1.5 and 0.5 KV and the absorption spectrum at the 4d threshold; similar measurements for Th in ThO2 (and absorption spectrum at the 5d threshold) and U in U3O8 (and absorption spectrum at the 5d threshold); and for Ce in CeO2 (and absorption spectrum at the 4d threshold). The results are discussed. (U.K.)

  19. Sol gel chemistry applied to the synthesis of actinide-based compounds for the fabrication of advanced fuels

    The chemistry of the sol-gel process is based on hydroxylation and condensation of molecular precursors and can be used for the elaboration of advanced nuclear fuel or transmutation targets. On the one hand, some fundamental studies are conducted, based on complexation reactions to modulate and control the reactivity of the different cations (Zr(IV) and minor actinides) prior to hydrolysis and condensation step. The purpose of this work is to obtain hetero poly-condensation in order to form homogenous compounds with a controlled microstructure. On the other hand, internal gelation process, one of the important sol-gel routes for the preparation of actinides microspheres (the dedicated design for advanced nuclear fuel or transmutation targets) is developed. Investigations are currently carried out to study the gelation behaviour of solutions containing actinides (III) or (IV) in comparison with the more well known behaviour of U(VI) studied during the development of process for beads production (1960 - 1990). (authors)

  20. On the synthesis of actinide complexes with neutral organic phosphorus compounds

    The complexes of uranium (6) and (4) nitrates with trialkyl-phosphine oxides (TAPO) have been synthetized, and qeneral methods of their synthesis, separation and purification described. It has been found that, whatever the method of preparation, each compound of the synthesized homologous series of complexes corresponds only to disolvate stoichiometry of a qeneral formula, UO2(NO3)2 x 2(Csub(n)Hsub(2n+1))3PO and U(NO3)4 x 2(Csub(n)Hsub(2n+1))3PO. It is shown that the complexes prepared do not contain water and nitric acid. The absence of water and acid in the complex composition, as well as the possibility of preparing the same compounds by the methods where no nitric acid is used, make it possible to believe that formation of acidocomplexes is unlikely. The described methods pf complex synthesis may be of use for preparative and analytical purposes in separating (quantitatively, in some cases) complexes of actinide, rare-earth, noble, transplutonium, and other elements with phosphates, phosphinates, phosphine oxides, di- and polyoxides, as well as with other organic ligands. The experimental data on the thermal properties of the complexes separated are presented

  1. Separation of actinides from lanthanides using acidic organophosphorus compounds: extraction chromatographic studies

    The partitioning of actinides from HLW using TBP and CMPO generates a mixture of actinides and lanthanides as one of the secondary streams. The paper discusses the results of the extraction chromatographic separation using KSM-17 and HDEHP supported on Chromosorb-102. (author)

  2. Effect of organic compounds for the advection of actinide elements in the environments

    Muraoka, Susumu; Nagao, Seiya; Tanaka, Tadao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Hiraki, Keizo; Nakaguchi, Yuzuru; Suzuki, Yasuhiro

    1998-01-01

    The aim of this studies is understood the effects of humic substances for the advection of actinide elements in the environments. These substances are a major role of dissolved organic matter in natural waters. In order to obtain the informations on the structure of metal-humic substances complexes, these substances were studied by fluorescence spectroscopy. Observation the spectrum forms, peak positions of maximum intensity are related to these informations on the chemical structures and functional groups in organic compounds. Using three-dimensional excitation emission matrix (3-D EEM) spectroscopy, the characteristics of metal-humic substances complexes were studied. Observation the wavelengths and fluorescence intensity of the peaks were varied between humic substances before the complex to the metal and these substances after ones. Understanding the fluorescence properties of metal-humic substances complexes, working program of the 3-D EEM spectroscopy was studied to obtaining detailed data collection. New program was applied to copper-humic acid complex, the peak positions which different with before the complex and after ones were recorded. This program is supported by the interpreation of fluorescence properties in the metal-humic substances by the 3-D EEM spectroscopy. (author)

  3. Optical spectra and electronic structure of actinide ions in compounds and in solution

    This report provides a summary of theoretical and experimental studies of actinide spectra in condensed phases. Much of the work was accomplished at Argonne National Laboratory, but references to related investigations by others are included. Spectroscopic studies of the trivlent actinides are emphasized, as is the use of energy level parameters, evaluated from experimental data, to investigate systematic trends in electronic structure and other properties. Some reference is made to correlations with atomic spectra, as well as with spectra of the (II), (IV), and higher valence states. 207 refs., 39 figs., 38 tabs

  4. The local/non-local duality of 5f electrons in actinide compounds: A mean-field study

    The local/non-local duality of 5f electrons in actinide compounds has been observed in a great variety of experiments including photo-emission spectroscopy, inelastic neutron scattering, muon spin relaxation measurements, and X-ray inelastic scattering. A general microscopic mechanism leading to the partial localization of 5f orbitals has been proposed within the so-called dual model. It is a generalized multi-orbital Hubbard model which includes the direct Coulomb interaction as well as the Hund's rule correlations. Using a generalized slave boson method, we study this model for an electronic filling corresponding to the prototype compound UPt3. We then analyse the calculated phase diagram and discuss the local/non-local and magnetic/non-magnetic phases in terms of orbitally dependent quasi-particle residues and partial electronic occupations.

  5. Preparations and mechanism of hydrolysis of ((8)annulene)actinide compounds. [Uranocene

    Moore, R.M. Jr.

    1985-07-01

    The mechanism of hydrolysis for bis(8)annulene actinide and lanthanide complexes has been studied in detail. The uranium complex, uranocene, decomposes with good pseudo-first order kinetics (in uranocene) in 1 M degassed solutions of H/sub 2/O in THF. Decomposition of a series of aryl-substituted uranocenes demonstrates that the hydrolysis rate is dependent on the electronic nature of the substituent (Hammett rho value = 2.1, r/sup 2/ = 0.999), with electron-withdrawing groups increasing the rate. When D/sub 2/O is substituted for H/sub 2/O, kinetic isotope effects of 8 to 14 are found for a variety of substituted uranocenes. These results suggest a pre-equilibrium involving approach of a water molecule to the central metal, followed by rate determining proton transfer to the eight membered ring and rapid decomposition to products. Each of the four protonations of the complex has a significant isotope effect. The product ratio of cyclooctatriene isomers formed in the hydrolysis varies, depending on the central metal of the complex. However, the general mechanism of hydrolysis, established for uranocene, can be extended to the hydrolysis and alcoholysis of all the (8)annulene complexes of the lanthanides and actinides.

  6. Preparations and mechanism of hydrolysis of ([8]annulene)actinide compounds

    The mechanism of hydrolysis for bis[8]annulene actinide and lanthanide complexes has been studied in detail. The uranium complex, uranocene, decomposes with good pseudo-first order kinetics (in uranocene) in 1 M degassed solutions of H2O in THF. Decomposition of a series of aryl-substituted uranocenes demonstrates that the hydrolysis rate is dependent on the electronic nature of the substituent (Hammett rho value = 2.1, r2 = 0.999), with electron-withdrawing groups increasing the rate. When D2O is substituted for H2O, kinetic isotope effects of 8 to 14 are found for a variety of substituted uranocenes. These results suggest a pre-equilibrium involving approach of a water molecule to the central metal, followed by rate determining proton transfer to the eight membered ring and rapid decomposition to products. Each of the four protonations of the complex has a significant isotope effect. The product ratio of cyclooctatriene isomers formed in the hydrolysis varies, depending on the central metal of the complex. However, the general mechanism of hydrolysis, established for uranocene, can be extended to the hydrolysis and alcoholysis of all the [8]annulene complexes of the lanthanides and actinides

  7. A semi-micro combustion assembly for the determination of carbon and hydrogen in actinide compounds

    A rapid combustion unit (Baird and Tatlock) incorporating a combustion chamber provided with baffle plates for complete combustion of the sample without the use of a catalyst has been assembled in a glove box for the determination of carbon and hydrogen in actinide complexes. The unit has been modified employing a movable electric furnace and a proportional temperature controller, for decomposition of the sample at desired heating rates. The set-up was standardised employing various reference materials such as benzoic acid, acetanilide, sulphanilamide and 1-chloro 2:4 dinitrobenzene and the standard deviation in the measurements evaluated. It has also been used successfully for the determination of carbon in uranium carbide and carbon and hydrogen in some uranyl-β-diketone-amine N-oxide complexes and in plutonium(IV) oxalate. (auth.)

  8. High pressure studies of UFe5Al7 and UFe7Al5 actinide compounds

    The ternary inter-metallic compounds, UFe5Al7 and UFe7Al5, crystallize in a tetragonal ThMn12 type structure. In the as-cast samples a residual phase of FeAl (∼2%wt) was identified in the grain boundaries. The amount of the residual cubic phase of FeAl was determined by Rietveld analysis and reduced by the annealing process. UFe5Al7 and UFe7Al5 maintain the tetragonal symmetry as a function of pressure, while FeAl keeps the cubic structure as was determined by the Rietveld analysis. The volume-pressure curve calculated from the X-ray analysis gives V/V0=0.87 for UFe5Al7 at 26.0 GPa and 0.89 at 24.6 GPa for UFe7Al5. (author)

  9. Synthesis, growth, and studies (crystal chemistry, magnetic chemistry) of actinide-based intermetallic compounds and alloys with a 1.1.1 stoichiometry

    The first part of this research thesis reports the study of the synthesis and reactivity of intermetallic compounds with a 1.1.1 stoichiometry. It presents the thermal properties of 1.1.1 compounds: general presentation of physical transitions, and of solid solutions and formation heat, application to actinides (reactivity analysis from phase diagrams, techniques of crystal synthesis and crystal growth. It describes experimental techniques: synthesis, determination of fusion temperature by dilatometry, methods used for crystal growth, characterisation techniques (metallography, X ray diffraction on powders, dilatometry). It discusses the obtained results in terms of characterisation of synthesised samples, of crystal growth, and of measurements of fusion temperature. The second part addresses crystal chemistry studies: structure of compounds with a 1.1.1 stoichiometry (Laves structures, Zr, Ti and Pu compounds), techniques of analysis by X-ray diffraction (on powders and on single crystals), result interpretation (UNiX compounds, AnTAl compounds with T being a metal from group VIII, AnTGa compounds, AnNiGe compounds, distance comparison, structure modifications under pressure). The third part concerns physical issues. The author addresses the following topics: physical properties of intermetallic 1.1.1 compounds (magnetism of yttrium phases, behaviour of uranium-based Laves phases, analysis of pseudo-binary diagrams, physical characteristics of uranium-based 1.1.1 compounds, predictions of physical measurements), analysis techniques (Moessbauer spectroscopy, SQUID for Superconducting Quantum Interference Device), and result interpretation

  10. Actinides-1981

    1981-09-01

    Abstracts of 134 papers which were presented at the Actinides-1981 conference are presented. Approximately half of these papers deal with electronic structure of the actinides. Others deal with solid state chemistry, nuclear physic, thermodynamic properties, solution chemistry, and applied chemistry.

  11. Actinides-1981

    Abstracts of 134 papers which were presented at the Actinides-1981 conference are presented. Approximately half of these papers deal with electronic structure of the actinides. Others deal with solid state chemistry, nuclear physic, thermodynamic properties, solution chemistry, and applied chemistry

  12. Actinide co-conversion by internal gelation

    Suitable microstructures and homogenous microspheres of actinide compounds are of interest for future nuclear fuel or transmutation target concepts to prevent the generation and dispersal of actinide powder. Sol-gel routes are being investigated as one of the possible solutions for producing these compounds. Preliminary work is described involving internal gelation to synthesize mixed compounds including minor actinides, particularly mixed actinide or mixed actinide-inert element compounds. A parameter study is discussed to highlight the importance of the initial broth composition for obtaining gel microspheres without major defects (cracks, craters, etc.). In particular, conditions are defined to produce gel beads from Zr(IV)/Y(III)/Ce(III) or Zr(IV)/An(III) systems. After gelation, the heat treatment of these microspheres is described for the purpose of better understanding the formation of cracks after calcination and verifying the effective synthesis of an oxide solid-solution. (authors)

  13. Sensitivity to actinide doping of uranium compounds by resonant inelastic X-ray scattering at uranium L3 edge.

    Kvashnina, Kristina O; Kvashnin, Yaroslav O; Vegelius, Johan R; Bosak, Alexei; Martin, Philippe M; Butorin, Sergei M

    2015-09-01

    Valence-to-core resonant inelastic X-ray scattering (RIXS) and high energy resolution fluorescence detection (HERFD) X-ray absorption measurements were performed at the U L3 edges of UO2 and UO2(NO3)2(H2O)6. The results are compared with model calculations based on the local-density-approximation formalism, taking into account Coulomb interaction U (LDA + U). We show that despite strong 5f-5f electronic correlations in the studied systems and the use of core-level excitations in the intermediate stage of the spectroscopic process, the RIXS technique probes a convolution of the single-particle densities of states in the valence and conduction bands. For UO2, the detected crystal-field splitting between the U 6d eg and t2g orbitals from the RIXS spectra (∼3.5 eV) is larger than that previously derived from optical spectroscopy. Furthermore, by using an example of the U0.75Pu0.25O2 mixed oxide, we show that the RIXS technique at the U L3 edges is sensitive to the substitution of U with other actinide, in contrast to conventional X-ray absorption methods. That is, due to changes in the occupied part rather than in the unoccupied part of the U 6d states caused by the substitution. PMID:26255719

  14. Actinide recycle

    A multitude of studies and assessments of actinide partitioning and transmutation were carried out in the late 1970s and early 1980s. Probably the most comprehensive of these was a study coordinated by Oak Ridge National Laboratory. The conclusions of this study were that only rather weak economic and safety incentives existed for partitioning and transmuting the actinides for waste management purposes, due to the facts that (1) partitioning processes were complicated and expensive, and (2) the geologic repository was assumed to contain actinides for hundreds of thousands of years. Much has changed in the few years since then. A variety of developments now combine to warrant a renewed assessment of the actinide recycle. First of all, it has become increasingly difficult to provide to all parties the necessary assurance that the repository will contain essentially all radioactive materials until they have decayed. Assurance can almost certainly be provided to regulatory agencies by sound technical arguments, but it is difficult to convince the general public that the behavior of wastes stored in the ground can be modeled and predicted for even a few thousand years. From this point of view alone there would seem to be a clear benefit in reducing the long-term toxicity of the high-level wastes placed in the repository

  15. Recovering actinide values

    Actinide values are recovered from sodium carbonate scrub waste solutions containing these and other values along with organic compounds resulting from the radiolytic and hydrolytic degradation of neutral organophosphorus extractants such as tri-n butyl phosphate (TBP) and dihexyl-N, N-diethyl carbamylmethylene phosphonate (DHDECMP) which have been used in the reprocessing of irradiated nuclear reactor fuels. The scrub waste solution is made acidic with mineral acid, to form a feed solution which is then contacted with a water-immiscible, highly polar organic extractant which selectively extracts the degradation products from the feed solution. The feed solution can then be processed to recover the actinides for storage or recycled back into the high-level waste process stream. The extractant can be recycled after stripping the degradation products with a neutral sodium carbonate solution. (author)

  16. High-pressure studies of a ThMn12-type actinide compound: UFe5Al7

    The ternary inter-metallic compound, UFe5Al7, crystallize in a tetragonal ThMn12 type structure. In the as-cast samples a residual phase of FeAl (∼2% wt) was identified in the grain boundaries. The amount of the residual cubic phase of FeAl was determined by Rietveld analysis and reduced by the annealing process. UFe5Al7 maintains the tetragonal symmetry as a function of pressure, while FeAl keeps the cubic structure as was determined by the Rietveld analysis. The volume-pressure curve calculated from the x-ray analysis is V/V0 = 0.87 for UFe5Al7 at 26.0 GPa

  17. Experimental studies of actinides in molten salts

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs

  18. Experimental studies of actinides in molten salts

    Reavis, J.G.

    1985-06-01

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs.

  19. Synthesis of actinide nitrides, phosphides, sulfides and oxides

    Van Der Sluys, William G.; Burns, Carol J.; Smith, David C.

    1992-01-01

    A process of preparing an actinide compound of the formula An.sub.x Z.sub.y wherein An is an actinide metal atom selected from the group consisting of thorium, uranium, plutonium, neptunium, and americium, x is selected from the group consisting of one, two or three, Z is a main group element atom selected from the group consisting of nitrogen, phosphorus, oxygen and sulfur and y is selected from the group consisting of one, two, three or four, by admixing an actinide organometallic precursor wherein said actinide is selected from the group consisting of thorium, uranium, plutonium, neptunium, and americium, a suitable solvent and a protic Lewis base selected from the group consisting of ammonia, phosphine, hydrogen sulfide and water, at temperatures and for time sufficient to form an intermediate actinide complex, heating said intermediate actinide complex at temperatures and for time sufficient to form the actinide compound, and a process of depositing a thin film of such an actinide compound, e.g., uranium mononitride, by subliming an actinide organometallic precursor, e.g., a uranium amide precursor, in the presence of an effectgive amount of a protic Lewis base, e.g., ammonia, within a reactor at temperatures and for time sufficient to form a thin film of the actinide compound, are disclosed.

  20. Lanthanides and actinides in ionic liquids

    Binnemans, Koen

    2007-01-01

    This lecture gives an overview of the research possibilities offered by combining f-elements (lanthanides and actinides) with ionic liquids [1] Many ionic liquids are solvents with weakly coordinating anions. Solvation of lanthanide and actinide ions in these solvents is different from what is observed in conventional organic solvents and water. The poorly solvating behavior can also lead to the formation of coordination compounds with low coordination numbers. The solvation of f-elements can...

  1. The lanthanides and actinides

    This paper relates the chemical properties of the actinides to their position in the Mendeleev periodic system. The changes in the oxidation states of the actinides with increasing atomic number are similar to those of the 3d elements. Monovalent and divalent actinides are very similar to alkaline and alkaline earth elements; in the 3+ and 4+ oxidation states they resemble d elements in the respective oxidation states. However, in their highest oxidation states the actinides display their individual properties with only a slight resemblance to d elements. Finally, there is a profound similarity between the second half of the actinides and the first half of the lanthanides

  2. Recent progress in actinide borate chemistry.

    Wang, Shuao; Alekseev, Evgeny V; Depmeier, Wulf; Albrecht-Schmitt, Thomas E

    2011-10-21

    The use of molten boric acid as a reactive flux for synthesizing actinide borates has been developed in the past two years providing access to a remarkable array of exotic materials with both unusual structures and unprecedented properties. [ThB(5)O(6)(OH)(6)][BO(OH)(2)]·2.5H(2)O possesses a cationic supertetrahedral structure and displays remarkable anion exchange properties with high selectivity for TcO(4)(-). Uranyl borates form noncentrosymmetric structures with extraordinarily rich topological relationships. Neptunium borates are often mixed-valent and yield rare examples of compounds with one metal in three different oxidation states. Plutonium borates display new coordination chemistry for trivalent actinides. Finally, americium borates show a dramatic departure from plutonium borates, and there are scant examples of families of actinides compounds that extend past plutonium to examine the bonding of later actinides. There are several grand challenges that this work addresses. The foremost of these challenges is the development of structure-property relationships in transuranium materials. A deep understanding of the materials chemistry of actinides will likely lead to the development of advanced waste forms for radionuclides present in nuclear waste that prevent their transport in the environment. This work may have also uncovered the solubility-limiting phases of actinides in some repositories, and allows for measurements on the stability of these materials. PMID:21915396

  3. Actinide environmental chemistry

    In order to predict release and transport rates, as well as design cleanup and containment methods, it is essential to understand the chemical reactions and forms of the actinides under aqueous environmental conditions. Four important processes that can occur with the actinide cations are: precipitation, complexation, sorption and colloid formation. Precipitation of a solid phase will limit the amount of actinide in solution near the solid phase and have a retarding effect on release and transport rates. Complexation increases the amount of actinide in solution and tends to increase release and migration rates. Actinides can sorb on to mineral or rock surfaces which tends to retard migration. Actinide ions can form or become associated with colloidal sized particles which can, depending on the nature of the colloid and the solution conditions, enhance or retard migration of the actinide. The degree to which these four processes progress is strongly dependent on the oxidation state of the actinide and tends to be similar for actinides in the same oxidation state. In order to obtain information on the speciation of actinides in solution, i.e., oxidation state, complexation form, dissolved or colloidal forms, the use of absorption spectroscopy has become a method of choice. The advent of the ultrasensitive, laser induced photothermal and fluorescence spectroscopies has made possible the detection and study of actinide ions at the parts per billion level. With the availability of third generation synchrotrons and the development of new fluorescence detectors, X-ray absorption spectroscopy (XAS) is becoming a powerful technique to study the speciation of actinides in the environment, particularly for reactions at the solid/solution interfaces. (orig.)

  4. Research in actinide chemistry

    This research studies the behavior of the actinide elements in aqueous solution. The high radioactivity of the transuranium actinides limits the concentrations which can be studied and, consequently, limits the experimental techniques. However, oxidation state analogs (trivalent lanthanides, tetravalent thorium, and hexavalent uranium) do not suffer from these limitations. Behavior of actinides in the environment are a major USDOE concern, whether in connection with long-term releases from a repository, releases from stored defense wastes or accidental releases in reprocessing, etc. Principal goal of our research was expand the thermodynamic data base on complexation of actinides by natural ligands (e.g., OH-, CO32-, PO43-, humates). The research undertakes fundamental studies of actinide complexes which can increase understanding of the environmental behavior of these elements

  5. Spin–orbit coupling in actinide cations

    Bagus, Paul S.; Ilton, Eugene S.; Martin, Richard L.;

    2012-01-01

    The limiting case of Russell–Saunders coupling, which leads to a maximum spin alignment for the open shell electrons, usually explains the properties of high spin ionic crystals with transition metals. For actinide compounds, the spin–orbit splitting is large enough to cause a significantly reduced...

  6. Spin-Orbit Coupling in Actinide Cations

    Bagus, Paul S.; Ilton, Eugene S.; Martin, Richard L.; Jensen, Hans Jorgen A.; Knecht, Stefan

    2012-09-01

    The limiting case of Russell-Saunders coupling, which leads to a maximum spin alignment for the open shell electrons, usually explains the properties of high spin ionic crystals with transition metals. For actinide compounds, the spin-orbit splitting is large enough to cause a significantly reduced spin alignment. Novel concepts are used to explain the dependence of the spin alignment on the 5f shell occupation. We present evidence that the XPS of ionic actinide materials may provide direct information about the angular momentum coupling within the 5f shell.

  7. Spin-orbit coupling in actinide cations

    Bagus, Paul S.; Ilton, Eugene S.; Martin, Richard L.; Jensen, Hans Jørgen Aa.; Knecht, Stefan

    2012-09-01

    The limiting case of Russell-Saunders coupling, which leads to a maximum spin alignment for the open shell electrons, usually explains the properties of high spin ionic crystals with transition metals. For actinide compounds, the spin-orbit splitting is large enough to cause a significantly reduced spin alignment. Novel concepts are used to explain the dependence of the spin alignment on the 5f shell occupation. We present evidence that the XPS of ionic actinide materials may provide direct information about the angular momentum coupling within the 5f shell.

  8. In vitro removal of actinide (IV) ions

    Weitl, Frederick L.; Raymond, Kenneth N.

    1982-01-01

    A compound of the formula: ##STR1## wherein X is hydrogen or a conventional electron-withdrawing group, particularly --SO.sub.3 H or a salt thereof; n is 2, 3, or 4; m is 2, 3, or 4; and p is 2 or 3. The present compounds are useful as specific sequestering agents for actinide (IV) ions. Also described is a method for the 2,3-dihydroxybenzamidation of azaalkanes.

  9. Neutron scattering studies of the actinides

    The electronic structure of actinide materials presents a unique example of the interplay between localized and band electrons. Together with a variety of other techniques, especially magnetization and the Mossbauer effect, neutron studies have helped us to understand the systematics of many actinide compounds that order magnetically. A direct consequence of the localization of 5f electrons is the spin-orbit coupling and subsequent spin-lattice interaction that often leads to strongly anisotropic behavior. The unusual phase transition in UO2, for example, arises from interactions between quadrupole moments. On the other hand, in the monopnictides and monochalcogenides, the anisotropy is more difficult to understand, but probably involves an interaction between actinide and anion wave functions. A variety of neutron experiments, including form-factor studies, critical scattering and measurements of the elementary excitations have now been performed, and the conceptual picture emerging from these studies will be discussed

  10. TUCS/phosphate mineralization of actinides

    Nash, K.L. [Argonne National Lab., IL (United States)

    1997-10-01

    This program has as its objective the development of a new technology that combines cation exchange and mineralization to reduce the concentration of heavy metals (in particular actinides) in groundwaters. The treatment regimen must be compatible with the groundwater and soil, potentially using groundwater/soil components to aid in the immobilization process. The delivery system (probably a water-soluble chelating agent) should first concentrate the radionuclides then release the precipitating anion, which forms thermodynamically stable mineral phases, either with the target metal ions alone or in combination with matrix cations. This approach should generate thermodynamically stable mineral phases resistant to weathering. The chelating agent should decompose spontaneously with time, release the mineralizing agent, and leave a residue that does not interfere with mineral formation. For the actinides, the ideal compound probably will release phosphate, as actinide phosphate mineral phases are among the least soluble species for these metals. The most promising means of delivering the precipitant would be to use a water-soluble, hydrolytically unstable complexant that functions in the initial stages as a cation exchanger to concentrate the metal ions. As it decomposes, the chelating agent releases phosphate to foster formation of crystalline mineral phases. Because it involves only the application of inexpensive reagents, the method of phosphate mineralization promises to be an economical alternative for in situ immobilization of radionuclides (actinides in particular). The method relies on the inherent (thermodynamic) stability of actinide mineral phases.

  11. Research in actinide chemistry

    1991-01-01

    This report contains research results on studies of inorganic and organic complexes of actinide and lanthanide elements. Special attention is given to complexes of humic acids and to spectroscopic studies.

  12. Subsurface Biogeochemistry of Actinides

    Kersting, Annie B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Univ. Relations and Science Education; Zavarin, Mavrik [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Glenn T. Seaborg Inst.

    2016-06-29

    A major scientific challenge in environmental sciences is to identify the dominant processes controlling actinide transport in the environment. It is estimated that currently, over 2200 metric tons of plutonium (Pu) have been deposited in the subsurface worldwide, a number that increases yearly with additional spent nuclear fuel (Ewing et al., 2010). Plutonium has been shown to migrate on the scale of kilometers, giving way to a critical concern that the fundamental biogeochemical processes that control its behavior in the subsurface are not well understood (Kersting et al., 1999; Novikov et al., 2006; Santschi et al., 2002). Neptunium (Np) is less prevalent in the environment; however, it is predicted to be a significant long-term dose contributor in high-level nuclear waste. Our focus on Np chemistry in this Science Plan is intended to help formulate a better understanding of Pu redox transformations in the environment and clarify the differences between the two long-lived actinides. The research approach of our Science Plan combines (1) Fundamental Mechanistic Studies that identify and quantify biogeochemical processes that control actinide behavior in solution and on solids, (2) Field Integration Studies that investigate the transport characteristics of Pu and test our conceptual understanding of actinide transport, and (3) Actinide Research Capabilities that allow us to achieve the objectives of this Scientific Focus Area (SFA and provide new opportunities for advancing actinide environmental chemistry. These three Research Thrusts form the basis of our SFA Science Program (Figure 1).

  13. In-situ mineralization of actinides with phytic acid

    A new approach to the remediation of actinide contamination is described. A hydrolytically unstable organophosphorus compound, phytic acid, is introduced into the contaminated environment. In the short term (up to several hundred years), phytate acts as a cation exchanger to absorb mobile actinide ions from ground waters. Ultimately, phytate decomposes to release phosphate and promote the formation of insoluble phosphate mineral phases, considered an ideal medium to immobilize actinides, as it forms compounds with the lowest solubility of any candidate mineral species. This overview will discuss the rate of hydrolysis of phytic acid, the formation of lanthanide/actinide phosphate mineral forms, the cation exchange behavior of insoluble phytate, and results from laboratory demonstration of the application to soils from the Fernald site

  14. Low-temperature properties of rare-earth and actinide iron phosphide compounds MFe4P/sub 12/ (M = La, Pr, Nd, and Th)

    The low-temperature properties of MFe4P/sub 12/ (M = La, Pr, Nd, and Th) single crystals have been studied by means of electrical-resistivity, magnetization, specific-heat, and magnetoresistivity measurements. Superconductivity among these compounds is known to occur only in LaFe4P/sub 12/, which has a superconducting transition temperature T/sub c/ of ∼4 K. The compounds PrFe4P/sub 12/ and NdFe4P/sub 12/ display features that suggest the occurrence of antiferromagnetic ordering below ∼6.2 K and ferromagnetic ordering below ∼2 K, respectively. Isothermal magnetization curves for PrFe4P/sub 12/ below 6 K reveal a spin-flop or metamagnetic transition

  15. Electronic structure and properties of rare earth and actinide intermetallics

    There are 188 contributions, experimental and theoretical, a few on rare earth and actinide elements but mostly on rare earth and actinide intermetallic compounds and alloys. The properties dealt with include 1) crystal structure, 2) magnetic properties and magnetic structure, 3) magnetic phase transformations and valence fluctuations, 4) electrical properties and superconductivity and their temperature, pressure and magnetic field dependence. A few papers deal with crystal growth and novel measuring methods. (G.Q.)

  16. Actinide isotopic analysis systems

    This manual provides instructions and procedures for using the Lawrence Livermore National Laboratory's two-detector actinide isotope analysis system to measure plutonium samples with other possible actinides (including uranium, americium, and neptunium) by gamma-ray spectrometry. The computer program that controls the system and analyzes the gamma-ray spectral data is driven by a menu of one-, two-, or three-letter options chosen by the operator. Provided in this manual are descriptions of these options and their functions, plus detailed instructions (operator dialog) for choosing among the options. Also provided are general instructions for calibrating the actinide isotropic analysis system and for monitoring its performance. The inventory measurement of a sample's total plutonium and other actinides content is determined by two nondestructive measurements. One is a calorimetry measurement of the sample's heat or power output, and the other is a gamma-ray spectrometry measurement of its relative isotopic abundances. The isotopic measurements needed to interpret the observed calorimetric power measurement are the relative abundances of various plutonium and uranium isotopes and americium-241. The actinide analysis system carries out these measurements. 8 figs

  17. Actinides: from heavy fermions to plutonium metallurgy

    The actinide elements mark the emergence of 5f electrons. The f electrons possess sufficiently unusual characteristics that their participation in atomic binding often result in dramatic changes in properties. This provides an excellent opportunity to study the question of localization of electrons; a question that is paramount in predicting the physical and chemical properties of d and f electron transition metals. The transition region between localized (magnetic) and itinerant (often superconducting) behavior provides for many interesting phenomena such as structural instabilities (polymorphism), spin fluctuations, mixed valences, charge density waves, exceptional catalytic activity and hydrogen storage. This region offers most interesting behavior such as that exhibited by the actinide compounds UBe13 and UPt3. Both compounds are heavy-fermion superconductors in which both magnetic and superconducting behavior exist in the same electrons. The consequences of f-electron bonding (which appears greatest at Plutonium) show dramatic effects on phase stability, alloying behavior, phase transformations and mechanical behavior

  18. Radiochemistry and actinide chemistry

    The analysis of trace amounts of actinide elements by means of radiochemistry, is discussed. The similarities between radiochemistry and actinide chemistry, in the case of species amount by cubic cm below 1012, are explained. The parameters which allow to define what are the observable chemical reactions, are given. The classification of radionuclides in micro or macrocomponents is considered. The validity of the mass action law and the partition function in the definition of the average number of species for trace amounts, is investigated. Examples illustrating the results are given

  19. Non-aqueous synthesis of isotropic and anisotropic actinide oxide nano-crystals

    In summary, a non-aqueous method based on the 'heating- up' approach was developed to prepare well-defined and non-agglomerated actinide (Th, U) oxide NCs. To the best of our knowledge this is the first time that such a method has been successfully applied to prepare ThO2 NCs. Surprisingly, it has been shown that the experimental conditions well suited for the formation of uranium oxide NCs do not allow the formation of thorium oxide NCs. Our results show that for a given organic medium, the nature of the actinide precursor and/or the nature of the actinide centre drastically influence the reactivity and hence the characteristics of the final actinide oxide NCs. This work proves the feasibility of the controlled synthesis of actinide oxide NCs by a non-aqueous approach. It contributes to our understanding of the controlled synthesis of actinide oxide NCs and prepares the ground for the synthesis of transuranium-based (particularly Np and Pu) nano-objects. Even if the controlled synthesis of nano-objects of actinide compounds is not an end in itself, it is the cornerstone of investigation into the nano-world of actinides. Indeed, successful investigations of the size and shape effects on the properties of actinide compounds depends on our capability to synthesize well-defined actinide-based nano-objects. Without any doubt, we are at least one decade late compared to what has been (and is still) done with stable elements. (authors)

  20. Modern x-ray spectral methods in the study of the electronic structure of actinide compounds: Uranium oxide UO2 as an example

    Teterin Yury A.

    2004-01-01

    Full Text Available Fine X-ray photo electron spectral (XPS structure of uranium dioxide UO2 in the binding energy (BE range 0-~č40 eV was associated mostly with the electrons of the outer (OVMO (0-15 eV BE and inner (IVMO (15-40 eV BE valence molecular orbitals formed from the incompletely U5f,6d,7s and O2p and completely filled U6p and O2s shells of neighboring uranium and oxygen ions. It agrees with the relativistic calculation results of the electronic structure for the UO812–(Oh cluster reflecting uranium close environment in UO2, and was confirmed by the X-ray (conversion electron, non-resonance and resonance O4,5(U emission, near O4,5(U edge absorption, resonance photoelectron, Auger spectroscopy data. The fine OVMO and IVMO related XPS structure was established to yield conclusions on the degree of participation of the U6p,5f electrons in the chemical bond, uranium close environment structure and interatomic distances in oxides. Total contribution of the IVMO electrons to the covalent part of the chemical bond can be comparable with that of the OVMO electrons. It has to be noted that the IVMO formation can take place in compounds of any elements from the periodic table. It is a novel scientific fact in solid-state chemistry and physics.

  1. Modern x-ray spectral methods in the study of the electronic structure of actinide compounds: uranium oxide UO2 as an example

    Fine X-ray photoelectron spectral (XPS) structure of uranium dioxide UO2 in the binding energy (BE) range 0 - ∼40 eV was associated mostly with the electrons of the outer (OVMO) (0 - 15 eV BE) and inner (IVMO) (15 - 40 eV BE) valence molecular orbitals formed from the incompletely U5f,6d,7s and O2p and completely filled U6p and O2s shells of neighboring uranium and oxygen ions. It agrees with the relativistic calculation results of the electronic structure for the UO812- (Oh) cluster reflecting uranium close environment in UO2, and was confirmed by the X-ray (conversion electron, non-resonance and resonance O4,5(U) emission, near O4,5(U) edge absorption, resonance photoelectron, Auger) spectroscopy data. The fine OVMO and IVMO related XPS structure was established to yield conclusions on the degree of participation of the U6p, 5f electrons in the chemical bond, uranium close environment structure and interatomic distances in oxides. Total contribution of the IVMO electrons to the absolute value of the chemical bond can be comparable with that of the OVMO electrons. It has to be noted that the IVMO formation can take place in compounds of any elements from the periodic table. It is a novel scientific fact in solid-state chemistry and physics. (author)

  2. Actinide separative chemistry

    Actinide separative chemistry has focused very heavy work during the last decades. The main was nuclear spent fuel reprocessing: solvent extraction processes appeared quickly a suitable, an efficient way to recover major actinides (uranium and plutonium), and an extensive research, concerning both process chemistry and chemical engineering technologies, allowed the industrial development in this field. We can observe for about half a century a succession of Purex plants which, if based on the same initial discovery (i.e. the outstanding properties of a molecule, the famous TBP), present huge improvements at each step, for a large part due to an increased mastery of the mechanisms involved. And actinide separation should still focus R and D in the near future: there is a real, an important need for this, even if reprocessing may appear as a mature industry. We can present three main reasons for this. First, actinide recycling appear as a key-issue for future nuclear fuel cycles, both for waste management optimization and for conservation of natural resource; and the need concerns not only major actinide but also so-called minor ones, thus enlarging the scope of the investigation. Second, extraction processes are not well mastered at microscopic scale: there is a real, great lack in fundamental knowledge, useful or even necessary for process optimization (for instance, how to design the best extracting molecule, taken into account the several notifications and constraints, from selectivity to radiolytic resistivity?); and such a need for a real optimization is to be more accurate with the search of always cheaper, cleaner processes. And then, there is room too for exploratory research, on new concepts-perhaps for processing quite new fuels- which could appear attractive and justify further developments to be properly assessed: pyro-processes first, but also others, like chemistry in 'extreme' or 'unusual' conditions (supercritical solvents, sono-chemistry, could be

  3. SPECIFIC SEQUESTERING AGENTS FOR THE ACTINIDES

    Raymond, Kenneth N.; Smith, William L.; Weitl, Frederick L.; Durbin, Patricia W.; Jones, E.Sarah; Abu-Dari, Kamal; Sofen, Stephen R.; Cooper, Stephen R.

    1979-09-01

    This paper summarizes the current status of a continuing project directed toward the synthesis and characterization of chelating agents which are specific for actinide ions - especially Pu(IV) - using a biomimetic approach that relies on the observation that Pu(IV) and Fe(III) has marked similarities that include their biological transport and distribution in mammals. Since the naturally-occurring Fe(III) sequestering agents produced by microbes commonly contain hydroxamate and catecholate functional groups, these groups should complex the actinides very strongly and macrocyclic ligands incorporating these moieties are being prepared. We have reported the isolation and structure analysis of an isostructural series of tetrakis(catecholato) complexes with the general stoichiometry Na{sub 4}[M(C{sub 6}H{sub 4}O{sub 2}){sub 4}] • 21 H{sub 2}O (M = Th, U, Ce, Hf). These complexes are structural archetypes for the cavity that must be formed if an actinide-specific sequestering agent is to conform ideally to the coordination requirements of the central metal ion. The [M(cat){sub 4}]{sup 4-} complexes have the D{sub 2d} symmetry of the trigonal-faced dodecahedron.. The complexes Th [R'C(0)N(O)R]{sub 4} have been prepared where R = isopropyl and R' = t-butyl or neopentyl. The neopentyl derivative is also relatively close to an idealized D{sub 2d} dodecahedron, while the sterically more hindered t-butyl compound is distorted toward a cubic geometry. The synthesis of a series of 2, 3-dihydroxy-benzoyl amide derivatives of linear and cyclic tetraaza- and diazaalkanes is reported. Sulfonation of these compounds improves the metal complexation and in vivo removal of plutonium from test animals. These results substantially exceed the capabilities of compounds presently used for the therapeutic treatment of actinide contamination.

  4. ACTINET: a European Network for Actinide Sciences

    Full text of publication follows: The research in Actinide sciences appear as a strategic issue for the future of nuclear systems. Sustainability issues are clearly in connection with the way actinide elements are managed (either addressing saving natural resource, or decreasing the radiotoxicity of the waste). The recent developments in the field of minor actinide P and T offer convincing indications of what could be possible options, possible future processes for the selective recovery of minor actinides. But they point out, too, some lacks in the basic understanding of key-issues (such as for instance the control An versus Ln selectivity, or solvation phenomena in organic phases). Such lacks could be real obstacles for an optimization of future processes, with new fuel compounds and facing new recycling strategies. This is why a large and sustainable work appears necessary, here in the field of basic actinide separative chemistry. And similar examples could be taken from other aspects of An science, for various applications (nuclear fuel or transmutation targets design, or migration issues,): future developments need a strong, enlarged, scientific basis. The Network ACTINET, established with the support of the European Commission, has the following objectives: - significantly improve the accessibility of the major actinide facilities to the European scientific community, and form a set of pooled facilities, as the corner-stone of a progressive integration process, - improve mobility between the member organisations, in particular between Academic Institutions and National Laboratories holding the pooled facilities, - merge part of the research programs conducted by the member institutions, and optimise the research programs and infrastructure policy via joint management procedures, - strengthen European excellence through a selection process of joint proposals, and reduce the fragmentation of the community by putting critical mass of resources and expertise on

  5. Method for purifying bidentate organophosphorus compounds

    Schulz, Wallace W.

    1977-01-01

    Bidentate organophosphorus compounds useful for extracting actinide elements from acidic nuclear waste solutions are purified of undesirable acidic impurities by contacting the compounds with ethylene glycol which preferentially extracts the impurities found in technical grade bidentate compounds.

  6. Factors affecting actinide solubility in a repository for spent fuel, 1

    The main tasks in the study were to get information on the chemical conditions in a repository for spent fuel and information on factors affecting releases of actinides from spent fuel and solubility of actinides in a repository for spent fuel. The work in this field started at the Reactor Laboratory of the Technical Research Centre of Finland (VTT) in 1982. This is a report on the effects on the main parameters, Eh, pH, carbonate, organic compounds, colloids, microbes and radiation on the actinide solubility in the nearfield of the repository. Another task has been to identify available models and reported experience from actinide solubility calculations with different codes. 167 refs

  7. Photochemistry of the actinides

    It has been found that all three major actinides have a useful variety of photochemical reactions which could be used to achieve a separations process that requires fewer reagents. Several features merit enumerating: (1) Laser photochemistry is not now as uniquely important in fuel reprocessing as it is in isotopic enrichment. The photochemistry can be successfully accomplished with conventional light sources. (2) The easiest place to apply photo-reprocessing is on the three actinides U, Pu, and Np. The solutions are potentially cleaner and more amenable to photoreactions. (3) Organic-phase photoreactions are probably not worth much attention because of the troublesome solvent redox chemistry associated with the photochemical reaction. (4) Upstream process treatment on the raffinate (dissolver solution) may never be too attractive since the radiation intensity precludes the usage of many optical materials and the nature of the solution is such that light transmission into it might be totally impossible

  8. Actinides: why are they important biologically

    The following topics are discussed: actinide elements in energy systems; biological hazards of the actinides; radiation protection standards; and purposes of actinide biological research with regard to toxicity, metabolism, and therapeutic regimens

  9. On the indenyl compounds of actinide elements

    The complexes (eta5-C9H7)AnX3.Lsub(a).Lsub(b) (X = Cl or Br, An = U or Th, Lsub(a) = C4H8O (THF) or (C6H5)3PO (TPO), Lsub(b) = TPO or THF) have been prepared. Infrared, Raman, electronic and mass spectra as well as magnetic susceptibility measurements are reported and discussed. The solid-state molecular structure of (eta5-C9H7)UBr3. C4H8O. (C6H5)3PO is reported. The complexes (eta5-C9H7)AnX3.2(C6H5)3 PO in solution show a strong tendency to disproportionate giving (eta5-C9H7)3AnX. 2 AnX4.2(C6H5)3PO and free ligand. (author)

  10. Recovery of actinides from spent nuclear fuel by pyrochemical reprocessing

    The Partitioning and Transmutation (P and T) strategy is based on reduction of the long-term radiotoxicity of spent nuclear fuel by recovery and recycling of plutonium and minor actinides, i.e. Np, Am and Cm. Regardless if transmutation of actinides is conceived by a heterogeneous accelerator driven system, fast reactor concept or as integrated waste burning with a homogenous recycling of all actinides, the reprocessed fuels used are likely to be significantly different from the commercial fuels of today. Because of the fuel type and the high burn-up reached, traditional hydrometallurgical reprocessing such as used today might not be the most adequate method. The main reasons are the low solubility of some fuel materials in acidic aqueous solutions and the limited radiation stability of the organic solvents used in extraction processes. Therefore, pyrochemical separation techniques are under development worldwide, usually based on electrochemical methods, reductive extraction in a high temperature molten salt solvent or fluoride volatility techniques. The pyrochemical reprocessing developed in ITU is based on electrorefining of metallic fuel in molten LiCl-KCl using solid aluminium cathodes. This is followed by a chlorination process for the recovery of actinides from formed actinide-aluminium alloys, and exhaustive electrolysis is proposed for the clean-up of salt from the remaining actinides. In this paper, the main achievements in the electrorefining process are summarised together with results of the most recent experimental studies on characterisation of actinides-aluminium intermetallic compounds. U, Np and Pu alloys were investigated by electrochemical techniques using solid aluminium electrodes and the alloys formed by electrodeposition of the individual actinides were analysed by XRD and SEM-EDX. Some thermodynamic properties were determined from the measurements (standard electrode potentials, Gibbs energy, enthalpy and entropy of formation) as well as

  11. Physiochemical and spectroscopic behavior of actinides and lanthanides in solution, their sorption on minerals and their compounds formed with macromolecules; Comportamiento fisicoquimico y espectroscopico de actinidos y lantanidos en solucion, su sorcion sobre minerales y sus compuestos formados con macromoleculas

    Jimenez R, M., E-mail: melania.jimenez@inin.gob.m [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2010-07-01

    From the chemical view point, the light actinides has been those most studied; particularly the uranium, because is the primordial component of the nuclear reactors. The chemical behavior of these elements is not completely defined, since they can behave as transition metals or metals of internal transition, as they are the lanthanides. The actinides are radioactive; between them they are emitters of radiation alpha, highly toxic, of live half long and some very long, and artificial elements. For all this, to know them sometimes is preferable to use their chemical similarity with the lanthanides and to study these. In particular, the migration of emitters of radiation alpha to the environment has been studied taking as model the uranium. It is necessary to mention that actinides and lanthanides elements are in the radioactive wastes of the nuclear reactors. In the Chemistry Department of the Instituto Nacional de Investigaciones Nucleares (ININ) the researches about the actinides and lanthanides began in 1983 and, between that year and 1995 several works were published in this field. In 1993 the topic was proposed as a Department project and from then around of 13 institutional projects and managerial activity have been developed, besides 4 projects approved by the National Council of Science and Technology. The objective of the projects already developed and of the current they have been contributing knowledge for the understanding of the chemical behavior of the lanthanides and actinides, as much in solution as in the solid state, their behavior in the environment and the chemistry of their complexes with recurrent and lineal macromolecules. (Author)

  12. Optical techniques for actinide research

    In recent years, substantial gains have been made in the development of spectroscopic techniques for electronic properties studies. These techniques have seen relatively small, but growing, application in the field of actinide research. Photoemission spectroscopies, reflectivity and absorption studies, and x-ray techniques will be discussed and illustrative examples of studies on actinide materials will be presented

  13. Magnetism in the actinides: the role of neutron scattering

    Neutron scattering has played a crucial and unique role of elucidating the magnetism in actinide compounds. Examples are given of elastic scattering to determine magnetic structures, measure spatial correlations in the critical regime, and magnetic form factors, and of inelastic scattering to measure the (often elusive) spin excitations. Some future directions will be discussed

  14. Selective extraction of actinides from high level liquid wastes. Study of the possibilities offered by the Redox properties of actinides

    Partitioning of high level liquid wastes coming from nuclear fuel reprocessing by the PUREX process, consists in the elimination of minor actinides (Np, Am, and traces of Pu and U). Among the possible processes, the selective extraction of actinides with oxidation states higher than three is studied. First part of this work deals with a preliminary step; the elimination of the ruthenium from fission products solutions using the electrovolatilization of the RuO4 compound. The second part of this work concerns the complexation and oxidation reactions of the elements U, Np, Pu and Am in presence of a compound belonging to the insaturated polyanions family: the potassium phosphotungstate. For actinide ions with oxidation state (IV) complexed with phosphotungstate anion the extraction mechanism by dioctylamine was studied and the use of a chromatographic extraction technic permitted successful separations between tetravalents actinides and trivalents actinides. Finally, in accordance with the obtained results, the basis of a separation scheme for the management of fission products solutions is proposed

  15. Extraction of DBP and MBP from actinides: application to the recovery of actinides from TBP--Na2CO3 scrub solutions

    A flowsheet for the recovery of actinides from TBP--Na2CO3 scrub waste solutions has been developed, based on batch extraction data, and tested, using laboratory scale counter-current extraction techniques. The process utilizes 2-ethyl-1-hexanol (2-EHOH) to extract the TBP degradation products (HDBP and H2MBP) from acidified Na2CO3 scrub waste leaving the actinides in the aqueous phase. Dibutyl and monobutyl phosphoric acids are attached to the 2-EHOH molecules through hydrogen bonds. These hydrogen bonds also diminish the ability of the HDBP and H2MBP to complex actinides and thus all actinides remain in the aqueous raffinate. Dilute sodium hydroxide solutions can be used to back-extract the dibutyl and monobutyl phosphoric acid esters as their sodium salts. The 2-EHOH can then be recycled. After extraction of the acidified carbonate waste with 2-EHOH, the actinides may be readily extracted from the raffinate with DHDECMP or, in the case of tetra- and hexavalent actinides, with TBP. The alcohol extraction (ARALEX) process is relatively simple and involves inexpensive and readily available chemicals. The ARALEX process can also be applied to other actinide waste streams which contain appreciable concentrations of polar organic compounds that interfere with conventional actinide ion exchange and liquid--liquid extraction procedures

  16. New molecules for the separation of actinides (III): the picolinamides

    Minor actinide partitioning from high level liquid wastes produced during the reprocessing of nuclear fuels by the Purex process, requires the design of new extracting molecules. These new extractants must be able to separate, for example, actinides from lanthanides. This separation is very difficult, due to the similar chemical properties of these metallic species, but it can possibly be reached by using extractants with soft donor atoms (N or S). Some new molecules : the picolinamides are investigated in this way. The general chemical formula and the behaviour of these compounds in acidic media are given. (O.L.). 3 refs

  17. Study by X-ray diffraction of structure modifications induced by pressure in different actinide compounds: AnO2 dioxides (An=Th, Pu, Am), AnCl4 tetrachlorides (An=Th, U), UBx borides (x=2,4,12) and the carbide UC2

    Structural transitions, induced by pressure, of actinide compounds are studied by X-ray diffraction, the determination of incompressibility is also studied at atmospheric pressure. The crystal structure of ThO2, PuO2 and AmO2 evolves, near 40 MPa from a fcc lattice to an orthorhombic lattice. Incompressibility values associated to UO2 and NpO2 incompressibility evidence an important discontinuity between UO2 and NpO2 and other dioxides due to their different electronic structure. Tetragonal ThCl4 and UCl4 undergo a structure transition respectively at 2 and 5 GPa. UCl4 becomes monoclinic and its color changes. At higher pressure these compounds become progressively amorphous. The crystal structure of uranium borides is not changed up to 50 GPa. UC2 presents a phase transition at 17.6 GPa from a tetragonal to a hexagonal lattice

  18. Managing Inventories of Heavy Actinides

    The Department of Energy (DOE) has stored a limited inventory of heavy actinides contained in irradiated targets, some partially processed, at the Savannah River Site (SRS) and Oak Ridge National Laboratory (ORNL). The 'heavy actinides' of interest include plutonium, americium, and curium isotopes; specifically 242Pu and 244Pu, 243Am, and 244/246/248Cm. No alternate supplies of these heavy actinides and no other capabilities for producing them are currently available. Some of these heavy actinide materials are important for use as feedstock for producing heavy isotopes and elements needed for research and commercial application. The rare isotope 244Pu is valuable for research, environmental safeguards, and nuclear forensics. Because the production of these heavy actinides was made possible only by the enormous investment of time and money associated with defense production efforts, the remaining inventories of these rare nuclear materials are an important part of the legacy of the Nuclear Weapons Program. Significant unique heavy actinide inventories reside in irradiated Mark-18A and Mark-42 targets at SRS and ORNL, with no plans to separate and store the isotopes for future use. Although the costs of preserving these heavy actinide materials would be considerable, for all practical purposes they are irreplaceable. The effort required to reproduce these heavy actinides today would likely cost billions of dollars and encompass a series of irradiation and chemical separation cycles for at least 50 years; thus, reproduction is virtually impossible. DOE has a limited window of opportunity to recover and preserve these heavy actinides before they are disposed of as waste. A path forward is presented to recover and manage these irreplaceable National Asset materials for future use in research, nuclear forensics, and other potential applications.

  19. Concentration of actinides in the food chain

    Considerable concern is now being expressed over the discharge of actinides into the environment. This report presents a brief review of the chemistry of the actinides and examines the evidence for interaction of the actinides with some naturally-occurring chelating agents and other factors which might stimulate actinide concentration in the food chain of man. This report also reviews the evidence for concentration of actinides in plants and for uptake through the gastrointestinal tract. (author)

  20. Calorimetric assay of minor actinides

    Rudy, C.; Bracken, D.; Cremers, T.; Foster, L.A.; Ensslin, N.

    1996-12-31

    This paper reviews the principles of calorimetric assay and evaluates its potential application to the minor actinides (U-232-4, Am-241, Am- 243, Cm-245, Np-237). We conclude that calorimetry and high- resolution gamma-ray isotopic analysis can be used for the assay of minor actinides by adapting existing methodologies for Pu/Am-241 mixtures. In some cases, mixtures of special nuclear materials and minor actinides may require the development of new methodologies that involve a combination of destructive and nondestructive assay techniques.

  1. Calorimetric assay of minor actinides

    This paper reviews the principles of calorimetric assay and evaluates its potential application to the minor actinides (U-232-4, Am-241, Am- 243, Cm-245, Np-237). We conclude that calorimetry and high- resolution gamma-ray isotopic analysis can be used for the assay of minor actinides by adapting existing methodologies for Pu/Am-241 mixtures. In some cases, mixtures of special nuclear materials and minor actinides may require the development of new methodologies that involve a combination of destructive and nondestructive assay techniques

  2. Results of storage studies of separated minor actinides

    In the framework of the French law of 1991 about the management of radioactive wastes, studies have been carried out on the separation, conditioning and storage of minor actinides in order to dispose of a complete and thorough processing file for spent fuels: conversion of actinide nitrate liquid solutions from deep separation processes into solid compounds, conversion of these compounds into a physical form suitable for storage, conditioning of these compounds in the form of packages, and design of storage facilities compatible with the specificities (thermal, radioactive) of separated minor actinides and with storage durations of few decades. The already-tested industrial processes have been favored, the feasibility of conditioning and storage operations have been evaluated for curium, in particular concerning the thermal aspect. The studies carried out so far have permitted to define the conversion process and the conditioning solution and to evaluate different possibilities of storage facility concepts. The future studies will focus on the development of optimized versions of facilities specific to each category of separated minor actinides. (J.S.)

  3. Actinides and the environment

    The book combines in one volume the opinions of experts regarding the interaction of radionuclides with the environment and possible ways to immobilize and dispose of nuclear waste. The relevant areas span the spectrum from pure science, such as the fundamental physics and chemistry of the actinides, geology, environmental transport mechanisms, to engineering issues such as reactor operation and the design of nuclear waste repositories. The cross-fertilization between these various areas means that the material in the book will be accessible to seasoned scientists who may wish to obtain an overview of the current state of the art in the field of environmental remediation of radionuclides, as well as to beginning scientists embarking on a career in this field. refs

  4. Environmental research on actinide elements

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers

  5. Properties of minor actinide nitrides

    The present status of the research on properties of minor actinide nitrides for the development of an advanced nuclear fuel cycle based on nitride fuel and pyrochemical reprocessing is described. Some thermal stabilities of Am-based nitrides such as AmN and (Am, Zr)N were mainly investigated. Stabilization effect of ZrN was cleary confirmed for the vaporization and hydrolytic behaviors. New experimental equipments for measuring thermal properties of minor actinide nitrides were also introduced. (author)

  6. Radiochemical studies of neutron deficient actinide isotopes

    The production of neutron deficient actinide isotopes in heavy ion reactions was studied using alpha, gamma, x-ray, and spontaneous fission detection systems. A new isotope of berkelium, 242Bk, was produced with a cross-section of approximately 10 μb in reactions of boron on uranium and nitrogen on thorium. It decays by electron capture with a half-life of 7.0 +- 1.3 minutes. The alpha-branching ratio for this isotope is less than 1% and the spontaneous fission ratio is less than 0.03%. Studies of (Heavy Ion, pxn) and (Heavy Ion, αxn) transfer reactions in comparison with (Heavy ion, xn) compound nucleus reactions revealed transfer reaction cross-sections equal to or greater than the compound nucleus yields. The data show that in some cases the yield of an isotope produced via a (H.I.,pxn) or (H.I.,αxn) reaction may be higher than its production via an xn compound nucleus reaction. These results have dire consequences for proponents of the ''Z1 + Z2 = Z/sub 1+2/'' philosophy. It is no longer acceptable to assume that (H.I.,pxn) and (H.I.,αxn) product yields are of no consequence when studying compound nucleus reactions. No evidence for spontaneous fission decay of 228Pu, 230Pu, 232Cm, or 238Cf was observed indicating that strictly empirical extrapolations of spontaneous fission half-life data is inadequate for predictions of half-lives for unknown neutron deficient actinide isotopes

  7. Radiochemical studies of neutron deficient actinide isotopes

    Williams, K.E.

    1978-04-01

    The production of neutron deficient actinide isotopes in heavy ion reactions was studied using alpha, gamma, x-ray, and spontaneous fission detection systems. A new isotope of berkelium, /sup 242/Bk, was produced with a cross-section of approximately 10 ..mu..b in reactions of boron on uranium and nitrogen on thorium. It decays by electron capture with a half-life of 7.0 +- 1.3 minutes. The alpha-branching ratio for this isotope is less than 1% and the spontaneous fission ratio is less than 0.03%. Studies of (Heavy Ion, pxn) and (Heavy Ion, ..cap alpha..xn) transfer reactions in comparison with (Heavy ion, xn) compound nucleus reactions revealed transfer reaction cross-sections equal to or greater than the compound nucleus yields. The data show that in some cases the yield of an isotope produced via a (H.I.,pxn) or (H.I.,..cap alpha..xn) reaction may be higher than its production via an xn compound nucleus reaction. These results have dire consequences for proponents of the ''Z/sub 1/ + Z/sub 2/ = Z/sub 1+2/'' philosophy. It is no longer acceptable to assume that (H.I.,pxn) and (H.I.,..cap alpha..xn) product yields are of no consequence when studying compound nucleus reactions. No evidence for spontaneous fission decay of /sup 228/Pu, /sup 230/Pu, /sup 232/Cm, or /sup 238/Cf was observed indicating that strictly empirical extrapolations of spontaneous fission half-life data is inadequate for predictions of half-lives for unknown neutron deficient actinide isotopes.

  8. Molecular and electronic structure of actinide hexa-cyanoferrates

    The goal of this work is to improve our knowledge on the actinide-ligand bond properties. To this end, the hexacyanoferrate entities have been used as pre-organized ligand. We have synthesized, using mild chemistry, the following series of complexes: AnIV[FeII(CN)6].xH2O (An = Th, U, Np, Pu); AmIII[FeIII(CN)6].xH2O; Pu III[CoIII(CN)6].xH2O and K(H?)AnIII[FeII(CN)6].xH2O (An = Pu, Am). The metal oxidation states have been obtained thanks to the νCN, stretching vibration and to the actinide LIII absorption edge studies. As Prussian Blue, the AnIV[FeII(CN)6].xH2O (An = Np, Pu) are class II of Robin and Day compounds. X-ray Diffraction has shown besides that these complexes crystallize in the P63/m space group, as the isomorphic LaKFe(CN)6.4H2O complex used as structural model. The EXAFS oscillations at the iron K edge and at the An LIII edge allowed to determine the An-N, An-O, Fe-C and Fe-N distances. The display of the multiple scattering paths for both edges explains the actinide contribution absence at the iron edge, whereas the iron signature is present at the actinide edge. We have shown that the actinide coordination sphere in actinides hexa-cyanoferrates is comparable to the one of lanthanides. However, the actinides typical behavior towards the lanthanides is brought to the fore by the AnIV versus LnIII ions presence in this family of complexes. Contrarily to the 4f electrons, the 5f electrons influence the electronic properties of the compounds of this family. However, the gap between the An-N and Ln-N distances towards the corresponding metals ionic radii do not show any covalence bond evolution between the actinide and lanthanide series. (author)

  9. Using Correlations to Understand Changes in Actinide Bonding

    An important issue in actinide science is the changing role of the 5f electrons, both when progressing across the series, as well as how experimental variables affect these roles in a particular element's chemistries and physics. The function of these 5f electrons can be changed by experimental conditions: temperature and pressure being two of many such variables. The 5f electrons of several actinide metals, their alloys and compounds are affected greatly by pressure, due to the very large decreases in interatomic distances encountered under pressure. The latter bring about significant changes in the total energy of the system and in the electronic energy levels, which in turn affect the potential for overlap/hybridization) of their orbitals, promotion of electrons to other orbitals, etc. The physical state, temperature, pressure, specific structures, magnetic interactions and spin polarization effects are all critical parameters for bonding. Often correlations of behavior with these parameters can provide unique insights and understanding into the bonding and the changes that occur in it. With the advancement of modern computation approaches using FPMTO, or other approaches, theory has enlightened greatly the understanding of not only the bonding behavior of these elements but also the understanding of changes observed experimentally. But these computational efforts have some complications and limitations, and at times experimental findings and theory are not always in full agreement. In contrast to the behaviors of the elements, changes observed with compounds often are not be linked directly to the involvement of 5f electrons, due in part to the presence and bonding role of non-actinide atoms. The latter affect both the actinide interatomic distances and the type of electronic orbitals that interact. Presented here is an overview of the pressure behavior several actinide elements, some insights into the bonding behavior of compounds under pressure and selected

  10. The Dirac equation in electronic structure calculations: Accurate evaluation of DFT predictions for actinides

    Wills, John M [Los Alamos National Laboratory; Mattsson, Ann E [Sandia National Laboratories

    2012-06-06

    Brooks, Johansson, and Skriver, using the LMTO-ASA method and considerable insight, were able to explain many of the ground state properties of the actinides. In the many years since this work was done, electronic structure calculations of increasing sophistication have been applied to actinide elements and compounds, attempting to quantify the applicability of DFT to actinides and actinide compounds and to try to incorporate other methodologies (i.e. DMFT) into DFT calculations. Through these calculations, the limits of both available density functionals and ad hoc methodologies are starting to become clear. However, it has also become clear that approximations used to incorporate relativity are not adequate to provide rigorous tests of the underlying equations of DFT, not to mention ad hoc additions. In this talk, we describe the result of full-potential LMTO calculations for the elemental actinides, comparing results obtained with a full Dirac basis with those obtained from scalar-relativistic bases, with and without variational spin-orbit. This comparison shows that the scalar relativistic treatment of actinides does not have sufficient accuracy to provide a rigorous test of theory and that variational spin-orbit introduces uncontrolled errors in the results of electronic structure calculations on actinide elements.

  11. THERMODYNAMICS OF THE ACTINIDES

    Cunningham, Burris B.

    1962-04-01

    Recent work on the thermodynamic properties of the transplutonium elements is presented and discussed in relation to trends in thermodynamic properties of the actinide series. Accurate values are given for room temperature lattice parameters of two crystallographic forms, (facecentred cubic) fcc and dhcp (double-hexagonal closepacked), of americium metal and for the coefficients of thermal expansion between 157 and 878 deg K (dhcp) and 295 to 633 deg K (fcc). The meiting point of the metal, and its magnetic susceptibility between 77 and 823 deg K are reported and the latter compared with theoretical values for the tripositive ion calculated from spectroscopic data. Similar data (crystallography, meiting point and magnetic susceptibility) are given for metallic curium. A value for the heat of formation of americium monoxide is reported in conjunction with crystallographic data on the monoxide and mononitride. A revision is made in the current value for the heat of formation of Am/O/sub 2/ and for the potential of the Am(III)-Am(IV) couple. The crystal structures and lattice parameters are reported for the trichloride, oxychloride and oxides of californium. (auth)

  12. Molecular and electronic structure of actinide hexa-cyanoferrates; Structure moleculaire et electronique des hexacyanoferrates d'actinides

    Bonhoure, I

    2001-07-01

    The goal of this work is to improve our knowledge on the actinide-ligand bond properties. To this end, the hexacyanoferrate entities have been used as pre-organized ligand. We have synthesized, using mild chemistry, the following series of complexes: An{sup IV}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Th, U, Np, Pu); Am{sup III}[Fe{sup III}(CN){sub 6}].xH{sub 2}O; Pu {sup III}[Co{sup III}(CN){sub 6}].xH{sub 2}O and K(H?)An{sup III}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Pu, Am). The metal oxidation states have been obtained thanks to the {nu}{sub CN}, stretching vibration and to the actinide L{sub III} absorption edge studies. As Prussian Blue, the An{sup IV}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Np, Pu) are class II of Robin and Day compounds. X-ray Diffraction has shown besides that these complexes crystallize in the P6{sub 3}/m space group, as the isomorphic LaKFe(CN){sub 6}.4H{sub 2}O complex used as structural model. The EXAFS oscillations at the iron K edge and at the An L{sub III} edge allowed to determine the An-N, An-O, Fe-C and Fe-N distances. The display of the multiple scattering paths for both edges explains the actinide contribution absence at the iron edge, whereas the iron signature is present at the actinide edge. We have shown that the actinide coordination sphere in actinides hexa-cyanoferrates is comparable to the one of lanthanides. However, the actinides typical behavior towards the lanthanides is brought to the fore by the An{sup IV} versus Ln{sup III} ions presence in this family of complexes. Contrarily to the 4f electrons, the 5f electrons influence the electronic properties of the compounds of this family. However, the gap between the An-N and Ln-N distances towards the corresponding metals ionic radii do not show any covalence bond evolution between the actinide and lanthanide series. (author)

  13. Actinide burning and waste disposal

    Here we review technical and economic features of a new proposal for a synergistic waste-management system involving reprocessing the spent fuel otherwise destined for a U.S. high-level waste repository and transmuting the recovered actinides in a fast reactor. The proposal would require a U.S. fuel reprocessing plant, capable of recovering and recycling all actinides, including neptunium americium, and curium, from LWR spent fuel, at recoveries of 99.9% to 99.999%. The recovered transuranics would fuel the annual introduction of 14 GWe of actinide-burning liquid-metal fast reactors (ALMRs), beginning in the period 2005 to 2012. The new ALMRs would be accompanied by pyrochemical reprocessing facilities to recover and recycle all actinides from discharged ALMR fuel. By the year 2045 all of the LWR spent fuel now destined f a geologic repository would be reprocessed. Costs of constructing and operating these new reprocessing and reactor facilities would be borne by U.S. industry, from the sale of electrical energy produced. The ALMR program expects that ALMRs that burn actinides from LWR spent fuel will be more economical power producers than LWRs as early as 2005 to 2012, so that they can be prudently selected by electric utility companies for new construction of nuclear power plants in that era. Some leaders of DOE and its contractors argue that recovering actinides from spent fuel waste and burning them in fast reactors would reduce the life of the remaining waste to about 200-300 years, instead of 00,000 years. The waste could then be stored above ground until it dies out. Some argue that no geologic repositories would be needed. The current view expressed within the ALMR program is that actinide recycle technology would not replace the need for a geologic repository, but that removing actinides from the waste for even the first repository would simplify design and licensing of that repository. A second geologic repository would not be needed. Waste now planned

  14. Kinetics of actinide complexation reactions

    Though the literature records extensive compilations of the thermodynamics of actinide complexation reactions, the kinetics of complex formation and dissociation reactions of actinide ions in aqueous solutions have not been extensively investigated. In light of the central role played by such reactions in actinide process and environmental chemistry, this situation is somewhat surprising. The authors report herein a summary of what is known about actinide complexation kinetics. The systems include actinide ions in the four principal oxidation states (III, IV, V, and VI) and complex formation and dissociation rates with both simple and complex ligands. Most of the work reported was conducted in acidic media, but a few address reactions in neutral and alkaline solutions. Complex formation reactions tend in general to be rapid, accessible only to rapid-scan and equilibrium perturbation techniques. Complex dissociation reactions exhibit a wider range of rates and are generally more accessible using standard analytical methods. Literature results are described and correlated with the known properties of the individual ions

  15. 33rd Actinide Separations Conference

    McDonald, L M; Wilk, P A

    2009-05-04

    Welcome to the 33rd Actinide Separations Conference hosted this year by the Lawrence Livermore National Laboratory. This annual conference is centered on the idea of networking and communication with scientists from throughout the United States, Britain, France and Japan who have expertise in nuclear material processing. This conference forum provides an excellent opportunity for bringing together experts in the fields of chemistry, nuclear and chemical engineering, and actinide processing to present and discuss experiences, research results, testing and application of actinide separation processes. The exchange of information that will take place between you, and other subject matter experts from around the nation and across the international boundaries, is a critical tool to assist in solving both national and international problems associated with the processing of nuclear materials used for both defense and energy purposes, as well as for the safe disposition of excess nuclear material. Granlibakken is a dedicated conference facility and training campus that is set up to provide the venue that supports communication between scientists and engineers attending the 33rd Actinide Separations Conference. We believe that you will find that Granlibakken and the Lake Tahoe views provide an atmosphere that is stimulating for fruitful discussions between participants from both government and private industry. We thank the Lawrence Livermore National Laboratory and the United States Department of Energy for their support of this conference. We especially thank you, the participants and subject matter experts, for your involvement in the 33rd Actinide Separations Conference.

  16. Decorporation of inhaled actinides by chelation therapy

    This article describes recent work in NRPB laboratories that has identified some of the factors influencing the behaviour of plutonium, americium and curium compounds in the body after inhalation, together with a number of experimental approaches that are being developed to optimise their treatment with DTPA. It is concluded that the most effective treatment has yet to be developed, but progress must depend on a better understanding of the factors governing the transport of actinides in the body. It cannot be assumed that because the inhaled material is readily translocated to blood, that treatment regimens with Ca-DTPA based solely on previous understanding of the metabolic fate of soluble actinide complexes will be successful. In fact, depending on the nature of the material involved in the accident, inhalation alone or combined with prolonged infusion of DTPA may be more effective than the periodic intravenous injections of the chelating agent alone. For poorly transportable materials such as insoluble plutonium-239 dioxide, chelation treatment remains essentially ineffective. (U.K.)

  17. Thermal-hydraulics of actinide burner reactors

    As a part of conceptual study of actinide burner reactors, core thermal-hydraulic analyses were conducted for two types of reactor concepts, namely (1) sodium-cooled actinide alloy fuel reactor, and (2) helium-cooled particle-bed reactor, to examine the feasibility of high power-density cores for efficient transmutation of actinides within the maximum allowable temperature limits of fuel and cladding. In addition, calculations were made on cooling of actinide fuel assembly. (author)

  18. MICROBIAL TRANSFORMATIONS OF PLUTONIUM AND OTHER ACTINIDES IN TRANSURANIC AND MIXED WASTES

    The presence of the actinides Th, U, Np, Pu, and Am in transuranic (TRU) and mixed wastes is a major concern because of their potential for migration from the waste repositories and long-term contamination of the environment. The toxicity of the actinide elements and the long half-lives of their isotopes are the primary causes for concern. In addition to the radionuclides the TRU waste consists a variety of organic materials (cellulose, plastic, rubber, chelating agents) and inorganic compounds (nitrate and sulfate). Significant microbial activity is expected in the waste because of the presence of organic compounds and nitrate, which serve as carbon and nitrogen sources and in the absence of oxygen the microbes can use nitrate and sulfate as alternate electron acceptors. Biodegradation of the TRU waste can result in gas generation and pressurization of containment areas, and waste volume reduction and subsidence in the repository. Although the physical, chemical, and geochemical processes affecting dissolution, precipitation, and mobilization of actinides have been investigated, we have only limited information on the effects of microbial processes. Microbial activity could affect the chemical nature of the actinides by altering the speciation, solubility and sorption properties and thus could increase or decrease the concentrations of actinides in solution. Under appropriate conditions, dissolution or immobilization of actinides is brought about by direct enzymatic or indirect non-enzymatic actions of microorganisms. Dissolution of actinides by microorganisms is brought about by changes in the Eh and pH of the medium, by their production of organic acids, such as citric acid, siderophores and extracellular metabolites. Immobilization or precipitation of actinides is due to changes in the Eh of the environment, enzymatic reductive precipitation (reduction from higher to lower oxidation state), biosorption, bioaccumulation, biotransformation of actinides complexed

  19. Actinides and Life's Origins.

    Adam, Zachary

    2007-12-01

    There are growing indications that life began in a radioactive beach environment. A geologic framework for the origin or support of life in a Hadean heavy mineral placer beach has been developed, based on the unique chemical properties of the lower-electronic actinides, which act as nuclear fissile and fertile fuels, radiolytic energy sources, oligomer catalysts, and coordinating ions (along with mineralogically associated lanthanides) for prototypical prebiotic homonuclear and dinuclear metalloenzymes. A four-factor nuclear reactor model was constructed to estimate how much uranium would have been required to initiate a sustainable fission reaction within a placer beach sand 4.3 billion years ago. It was calculated that about 1-8 weight percent of the sand would have to have been uraninite, depending on the weight percent, uranium enrichment, and quantity of neutron poisons present within the remaining placer minerals. Radiolysis experiments were conducted with various solvents with the use of uraniumand thorium-rich minerals (metatorbernite and monazite, respectively) as proxies for radioactive beach sand in contact with different carbon, hydrogen, oxygen, and nitrogen reactants. Radiation bombardment ranged in duration of exposure from 3 weeks to 6 months. Low levels of acetonitrile (estimated to be on the order of parts per billion in concentration) were conclusively identified in 2 setups and tentatively indicated in a 3(rd) by gas chromatography/mass spectrometry. These low levels have been interpreted within the context of a Hadean placer beach prebiotic framework to demonstrate the promise of investigating natural nuclear reactors as power production sites that might have assisted the origins of life on young rocky planets with a sufficiently differentiated crust/mantle structure. Future investigations are recommended to better quantify the complex relationships between energy release, radioactive grain size, fissionability, reactant phase, phosphorus

  20. ALMR potential for actinide consumption

    The Advanced Liquid Metal Reactor (ALMR) is a US Department of Energy (DOE) sponsored fast reactor design based on the Power Reactor, Innovative Small Module (PRISM) concept originated by General Electric. This reactor combines a high degree of passive safety characteristics with a high level of modularity and factory fabrication to achieve attractive economics. The current reference design is a 471 MWt modular reactor fueled with ternary metal fuel. This paper discusses actinide transmutation core designs that fit the design envelope of the ALMR and utilize spent LWR fuel as startup material and for makeup. Actinide transmutation may be accomplished in the ALMR core by using either a breeding or burning configuration. Lifetime actinide mass consumption is calculated as well as changes in consumption behavior throughout the lifetime of the reactor. Impacts on system operational and safety performance are evaluated in a preliminary fashion. Waste disposal impacts are discussed. (author)

  1. Actinide cation-cation complexes

    The +5 oxidation state of U, Np, Pu, and Am is a linear dioxo cation (AnO2+) with a formal charge of +1. These cations form complexes with a variety of other cations, including actinide cations. Other oxidation states of actinides do not form these cation-cation complexes with any cation other than AnO2+; therefore, cation-cation complexes indicate something unique about AnO2+ cations compared to actinide cations in general. The first cation-cation complex, NpO2+·UO22+, was reported by Sullivan, Hindman, and Zielen in 1961. Of the four actinides that form AnO2+ species, the cation-cation complexes of NpO2+ have been studied most extensively while the other actinides have not. The only PuO2+ cation-cation complexes that have been studied are with Fe3+ and Cr3+ and neither one has had its equilibrium constant measured. Actinides have small molar absorptivities and cation-cation complexes have small equilibrium constants; therefore, to overcome these obstacles a sensitive technique is required. Spectroscopic techniques are used most often to study cation-cation complexes. Laser-Induced Photacoustic Spectroscopy equilibrium constants for the complexes NpO2+·UO22+, NpO2+·Th4+, PuO2+·UO22+, and PuO2+·Th4+ at an ionic strength of 6 M using LIPAS are 2.4 ± 0.2, 1.8 ± 0.9, 2.2 ± 1.5, and ∼0.8 M-1

  2. Orbital effects in actinide systems

    Actinide magnetism presents a number of important challenges; in particular, the proximity of 5f band to the Fermi energy gives rise to strong interaction with both d and s like conduction electrons, and the extended nature of the 5f electrons means that they can interact with electron orbitals from neighboring atoms. Theory has recently addressed these problems. Often neglected, however, is the overwhelming evidence for large orbital contributions to the magnetic properties of actinides. Some experimental evidence for these effects are presented briefly in this paper. They point, clearly incorrectly, to a very localized picture for the 5f electrons. This dichotomy only enhances the nature of the challenge

  3. Fabrication of actinide mononitride fuel

    Fabrication of actinide mononitride fuel in JAERI is summarized. Actinide mononitride and their solid solutions were fabricated by carbothermic reduction of the oxides in N2 or N2-H2 mixed gas stream. Sintering study was also performed for the preparation of pellets for the property measurements and irradiation tests. The products were characterized to be high-purity mononitride with a single phase of NaCl-type structure. Moreover, fuel pins containing uranium-plutonium mixed nitride pellets were fabricated for the irradiation tests in JMTR and JOYO. (author)

  4. Single crystal synthesis methods dedicated to structural investigations of very low solubility mixed-actinide oxalate coordination polymers

    Two crystal growth methods dedicated to very low solubility actinide coordination polymers have been developed and applied to the synthesis of mixed actinide(IV) actinide(IV) or actinide(IV)-actinide(III) oxalate single crystals of a size (typically 100-300 μm) suitable for isolating them and examining their crystal structure. These methods have been optimized on mixed systems composed of U(IV) and lanthanide (surrogate of trivalent actinides) and then assessed on U(IV) Am(III), Pu(IV)-Am(III), and U(IV) Pu(IV) mixtures. Three types of single crystals characterized by different structures have been obtained according to the synthesis and the chemical conditions. This is the first time that these well-known or recently discovered key compounds are formed by crystal growth methods specifically developed for actinide crystal handling (i.e., in glove boxes), thus enabling direct structural studies on transuranium element systems and acquisition of basic data. Characterization by X-ray diffraction, UV-visible solid spectroscopy, thermal ionization mass spectroscopy (TIMS), energy-dispersive X-ray spectroscopy (EDS), and inductively coupled plasma atomic emission spectroscopy (ICP-AES) demonstrates the potentialities and complementarity of the two crystal growth methods for obtaining the targeted mixed oxalates (actinide oxidation state and presence of both metallic ions in the crystal). More generally, this development opens broad prospects for single crystal synthesis of novel actinide organic frameworks and their structural description. (authors)

  5. Some new developments in actinide solvent extraction systems

    Consideration is given to application of neutral and acid organophosphoric compounds, adsorbed on various natural and synthetic carriers, in extraction chromatography for separation and isolation of actinides. It is shown that trioctylphosphine oxide (TOPO) on a solid combustible carrier represents the promising material for plutonium extraction. It was established experimentally that polyurethane foam possessed the maximal capacity with respect to TOPO; extractant losses at that after passing of 50 column volumes of nitric acid don't exceed 2 %

  6. Valence instabilities as a source of actinide system inconsistencies

    Light actinide elements alone, and in some of their alloys, may exist as a static or dynamic mixture of two configurations. Such a state can explain both a resistivity maximum and lack of magnetic order observed in so many actinide materials, and still be compatible with the existence of f-electrons in narrow bands. Impurity elements may stabilize slightly different intermediate valence states in U, Np, and Pu, thus contributing to inconsistencies in published results. The physical property behavior of mixed-valence, rare-earth compounds is very much like that observed in development of antiphase (martensitic) structures. Martensitic transformations in U, Np, and Pu, from high-temperature b. c. c. to alpha phase, may be a way of ordering an alloy-like metal of mixed or intermediate valence. The relative stability of each phase structure may depend upon its electron-valence ratio. A Hubbard model for electron correlations in a narrow energy band has been invoked in most recent theories for explaining light actinide behavior. Such a model may also be applicable to crystal symmetry changes in martensitic transformations in actinides

  7. Program and presentations of the 33th Actinide Days

    The 'Journees des Actinides' (JDA) is an annual conference which provides a forum for discussions on all aspects related to the chemical and physical properties of the actinides. At the 2003 meeting, mainly the following properties were discussed of actinides and a number of actinide compounds and complexes: crystal structure, crystal-phase transformations and transformation temperatures; electrical properties including superconductivity and superconducting transition temperatures; magnetic properties; specific heat and other thermodynamic properties; electronic structure, especially in condensed matter; chemical and physico-chemical properties. The relevant experimental techniques were also dealt with, such as neutron diffraction; X-ray diffraction, in particular using synchrotron radiation; photoemission techniques, electron microscopy and spectroscopy, etc. Altogether 96 contributions were presented, of which 42 were oral presentations and 54 poster presentations. A program of the meeting and texts of both type of presentations were published in electronic form in the PDF format. All contributions were inputted to INIS; the full text of the program and the presentations has been incorporated into the INIS collection of non-conventional literature on CD-ROM. (A.K.)

  8. Research on the chemical speciation of actinides

    A demand for the safe and effective management of spent nuclear fuel and radioactive waste generated from nuclear power plant draws increasing attention with the growth of nuclear power industry. The objective of this project is to establish the basis of research on the actinide chemistry by using advanced laser-based highly sensitive spectroscopic systems. Researches on the chemical speciation of actinides are prerequisite for the development of technologies related to nuclear fuel cycles, especially, such as the safe management of high level radioactive wastes and the chemical examination of irradiated nuclear fuels. For supporting these technologies, laser-based spectroscopies have been performed for the chemical speciation of actinide in an aqueous solutions and the quantitative analysis of actinide isotopes in spent nuclear fuels. In this report, results on the following subjects have been summarized. (1) Development of TRLFS technology for chemical speciation of actinides, (2) Development of LIBD technology for measuring solubility of actinides, (3) Chemical speciation of plutonium complexes by using a LWCC system, (4) Development of LIBS technology for the quantitative analysis of actinides, (5) Development of technology for the chemical speciation of actinides by CE, (6) Evaluation on the chemical reactions between actinides and humic substances, (7) Chemical speciation of actinides adsorbed on metal oxides surfaces, (8) Determination of actinide source terms of spent nuclear fuel

  9. Environmental research on actinide elements

    Pinder, J.E. III; Alberts, J.J.; McLeod, K.W.; Schreckhise, R.G. (eds.)

    1987-08-01

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers. (ACR)

  10. ENDF/B-V actinides

    This document summarizes the contents of the actinides part of the ENDF/B-V nuclear data library released by the US National Nuclear Data Center. This library or selective retrievals of it, are available from the IAEA Nuclear Data Section. (author)

  11. ACTINET: Establishment of a network of excellence for actinide sciences

    During the past decades, the actinide sciences have stagnated and become less attractive for young scientists, particularly in European countries. The safety requirements for maintaining up-to-date experimental capacities for handling alpha-emitting compounds, such as actinides, have gradually made researches very costly, and many radiochemistry laboratories have restricted their activities largely to beta- and gamma-emitting materials. This trend has dramatically reduced basic research in actinide sciences in Europe, and at present, only few national research institutions and one institute of the Joint Research Centre (ITU) are able to maintain the necessary research infrastructure. Very few laboratories in Europe possess now the expertise, technical competence and tools at the scale required by the technical challenges faced by the European countries, and none of them alone covers the full spectrum required. Furthermore, there are only a few places in Europe that have the appropriate research facilities to support education in actinide sciences with the appropriate research experience. Because of its strategic importance, the research in actinide sciences must therefore be revitalized, and become attractive again to students so that a next generation of actinide scientists and engineers can rise from the radiochemistry laboratories of universities. To sustain and disseminate the indispensable knowledge and expertise, as well as to maintain the threshold level of research activity in actinide sciences in Europe, success can only be envisaged by the use of Europe-wide networking. This particular research area requires reinforced links between national nuclear research institutes, the JRC, and radiochemistry laboratories of a number of academic research organisations: networking will not only facilitate the coordination and utilization of available facilities, but will also consolidate, optimise, and give the necessary impetus to enliven the research and training

  12. Organophosphorus reagents in actinide separations: Unique tools for production, cleanup and disposal

    Interactions of actinide ions with phosphate and organophosphorus reagents have figured prominently in nuclear science and technology, particularly in the hydrometallurgical processing of irradiated nuclear fuel. Actinide interactions with phosphorus-containing species impact all aspects from the stability of naturally occurring actinides in phosphate mineral phases through the application of the bismuth phosphate and PUREX processes for large-scale production of transuranic elements to the development of analytical separation and environment restoration processes based on new organophosphorus reagents. In this report, an overview of the unique role of organophosphorus compounds in actinide production, disposal, and environment restoration is presented. The broad utility of these reagents and their unique chemical properties is emphasized

  13. XAFS study on electronic structure analysis of actinide complexes

    Structures and electronic states of actinide complexes in solution were reviewed in relation to chemical separation required from nuclear fuel processing and nuclear waste disposal. Actinide complexes formed from organic compounds were studied in respect of solvent extraction in a wet method for nuclear fuel reprocessing. Particular attention was paid to the experiments by XAFS using synchrotron radiation. A Fourier transformation form of EXAFS oscillation was shown for a U(VI)-amide complex in dodecane solution. The structure radial function of Uranium-DH2EHA (N, N-dihyxyl-2-ethylhexanamice) in solution was determined by EXAFS, and the contributions of two oxygens in an axial direction and of ligand atoms coordinated in an equatorial plane, which combined with a central uranium ion, were indicated in the structure radial function. Structure parameters for U-, Np- and Pu-TBP(Tributyl phosphate) complexes, and for U-amide complexes were listed in Table. A theory predicted a systematic increase of covalency for complexes formed from UO22+∼PO22+ and TEP with an increase of atomic number of actinides, but for U-amide and U∼Pu-TBP complexes the effect of covalency was not reflected in interatomic distances. Some correlations between distribution ratios and different substituents were found in the interatomic distances between uranium and ligand atoms-Distribution ratios of U(VI) depended on interatomic distances between actinide atoms and oxygen ions in carbonyl and in nitric acid. Similarity of chemical bonds in all U-amide complexes except DH2EHA was indicated from XANES spectra of U LIII absorption edge. Three structures for Np(V)-carbon complexes were shown in a ball-and-stick model, and the structure parameters determined by EXAFS were also summarized in Table. Separation of trivalent actinide from the same valent lanthanide was described in connection with soft donors, which have donors such as sulfur and nitrogen atoms. (Kazumata, Y.)

  14. Actinide partitioning-transmutation program final report. I. Overall assessment

    This report is concerned with an overall assessment of the feasibility of and incentives for partitioning (recovering) long-lived nuclides from fuel reprocessing and fuel refabrication plant radioactive wastes and transmuting them to shorter-lived or stable nuclides by neutron irradiation. The principal class of nuclides considered is the actinides, although a brief analysis is given of the partitioning and transmutation (P-T) of 99Tc and 129I. The results obtained in this program permit us to make a comparison of the impacts of waste management with and without actinide recovery and transmutation. Three major conclusions concerning technical feasibility can be drawn from the assessment: (1) actinide P-T is feasible, subject to the acceptability of fuels containing recycle actinides; (2) technetium P-T is feasible if satisfactory partitioning processes can be developed and satisfactory fuels identified (no studies have been made in this area); and (3) iodine P-T is marginally feasible at best because of the low transmutation rates, the high volatility, and the corrosiveness of iodine and iodine compounds. It was concluded on the basis of a very conservative repository risk analysis that there are no safety or cost incentives for actinide P-T. In fact, if nonradiological risks are included, the short-term risks of P-T exceed the long-term benefits integrated over a period of 1 million years. Incentives for technetium and iodine P-T exist only if extremely conservative long-term risk analyses are used. Further RD and D in support of P-T is not warranted

  15. Extraction studies on the partitioning of actinides from HLW

    TRUEX process uses Octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) for the partitioning of actinides from acidic waste. CMPO is one of the most effective organophosphorus compounds. CMPO has drawbacks like third phase formation. A two-step process is developed using TBP and CMPO as extractants. The first step of the proposed process is a 'uranium depletion step' in which uranium in HLW is removed using 30% TBP in n-dodecane. Neptunium and plutonium, extracted in TBP, are recovered using a mixture of hydrogen peroxide (0.25 M) and ascorbic acid (0.05 M) in 2.0 M nitric acid medium. Neptunium and plutonium are reduced to Np(V) and Pu(III). Americium and curium as well as traces of uranium, neptunium and plutonium are partitioned in the second step. The separation of neptunium and plutonium from large quantities of uranium from loaded TBP will simplify their further separation. Use of citrate containing buffer solution for the recovery of actinides extracted in CMPO-TBP phase eliminates the problem of reflux of americium. This reduces the generation of secondary wastes. The process has been standardised based on the data generated in the batch and counter-current studies. Solvent extraction studies have also been carried out using a mixture of di-(2-ethylhexyl)phosphoric acid (HDEHP) and CMPO in n-paraffin. It is seen that the actinides can be extracted even from solutions of HLW at high acid concentration of 3 M using the mixed extractant. Plutonium is also stripped along with the trivalent actinides. This mixed solvent may find useful applications in the partitioning of actinides from waste solutions. Supported liquid membrane (SLM) technique for partitioning of actinides from high level waste of PUREX origin uses solution of CMPO in n-dodecane with polytetrafluoroethylene support and a mixture of citric acid, formic acid and hydrazine hydrate as a receiving phase. Studies indicated good transport of actinides across the membrane from nitric acid

  16. Actinides recycling assessment in a thermal reactor

    Highlights: • Actinides recycling is assessed using BWR fuel assemblies. • Four fuel rods are substituted by minor actinides rods in a UO2 and in a MOX fuel assembly. • Performance of standard fuel assemblies and the ones with the substitution is compared. • Reduction of actinides is measured for the fuel assemblies containing minor actinides rods. • Thermal reactors can be used for actinides recycling. - Abstract: Actinides recycling have the potential to reduce the geological repository burden of the high-level radioactive waste that is produced in a nuclear power reactor. The core of a standard light water reactor is composed only by fuel assemblies and there are no specific positions to allocate any actinides blanket, in this assessment it is proposed to replace several fuel rods by actinides blankets inside some of the reactor core fuel assemblies. In the first part of this study, a single uranium standard fuel assembly is modeled and the amount of actinides generated during irradiation is quantified for use it as reference. Later, in the same fuel assembly four rods containing 6 w/o of minor actinides and using depleted uranium as matrix were replaced and depletion was simulated to obtain the net reduction of minor actinides. Other calculations were performed using MOX fuel lattices instead of uranium standard fuel to find out how much reduction is possible to obtain. Results show that a reduction of minor actinides is possible using thermal reactors and a higher reduction is obtained when the minor actinides are embedded in uranium fuel assemblies instead of MOX fuel assemblies

  17. Results of coupled channels calculations for the neutrons cross sections of a set of actinide nuclei

    This report gathers recents results of neutrons interactions with the following actinide nuclei: 230Th, 232Th, 234U, 238U, 242Pu, 246Cm and 252Cf from the use of the coupled channels optical model. Tabulations of the following quantities are given in Annexe: total, direct elastic and inelastic scattering (integrated and differential), and compound nucleus formation cross sections; ground state generalized transmission coefficients needed to calculate the cross sections of partial compound nucleus processes. This work was carried out within the framework of the IAEA-NDS Coordinated Research Programme on the Intercomparison of Actinide Neutron Cross Section Evaluations

  18. Investigating Actinide Molecular Adducts From Absorption Edge Spectroscopy

    Den Auwer, C.; Conradson, S.D.; Guilbaud, P.; Moisy, P.; Mustre de Leon, J.; Simoni, E.; /SLAC, SSRL

    2006-10-27

    Although Absorption Edge Spectroscopy has been widely applied to the speciation of actinide elements, specifically at the L{sub III} edge, understanding and interpretation of actinide edge spectra are not complete. In that sense, semi-quantitative analysis is scarce. In this paper, different aspects of edge simulation are presented, including semi-quantitative approaches. Comparison is made between various actinyl (U, Np) aquo or hydroxy compounds. An excursion into transition metal osmium chemistry allows us to compare the structurally related osmyl and uranyl hydroxides. The edge shape and characteristic features are discussed within the multiple scattering picture and the role of the first coordination sphere as well as contributions from the water solvent are described.

  19. Synergistic extraction of actinides : Part II. Tetra-and trivalent actinides

    A detailed discussion on the synergistic solvent extraction behaviour of tetra- and trivalent actinide ions is presented. Structural aspects of the natural donor adducts of the tetravalent actinide ion chelates involved in synergism are also discussed. (author)

  20. Recovery of actinides from TBP-Na2Co3 scrub-waste solutions: the ARALEX process

    A flowsheet for the recovery of actinides from TBP-Na2CO3 scrub-waste solutions has been developed, based on batch extraction data, and tested, using laboratory-scale countercurrent extraction techniques. The process, called the ARALEX process, uses 2-ethyl-1-hexanol (2-EHOH) to extract the TBP degradation products (HDBP and H2MBP) from acidified Na2CO3 scrub waste leaving the actinides in the aqueous phase. Dibutyl and monobutyl phosphoric acids are attached to the 2-EHOH molecules through hydrogen bonds, which also diminish the ability of the HDBP and H2MBP to complex actinides. Thus all actinides remain in the aqueous raffinate. Dilute sodium hydroxide solutions can be used to back-extract the dibutyl and monobutyl phosphoric acid esters as their sodium salts. The 2-EHOH can then be recycled. After extraction of the acidified carbonate waste with 2-EHOH, the actinides may be readily extracted from the raffinate with DHDECMP or, in the case of tetra- and hexavalent actinides, with TBP. The ARALEX process can also be applied to other actinide waste streams which contain appreciable concentrations of polar organic compounds (e.g., detergents) that interfere with conventional actinide ion exchange and liquid-liquid extraction procedures. 20 figures, 6 tables

  1. Spin Hamiltonians for actinide ions

    The breakdown of Russel Saunders coupling for correlated f-levels of actinide ions is due to both spin orbit coupling and the crystalline electric field (CEF). Experiments on curium, an S-state ion in the metal for which the CEF is weak indicate a g-factor close to the Russel-Saunders value. Spin-orbit coupling is therefore too weak to produce jj coupling. This suggests a model for magnetic actinide ions in which the CEF ground multiplet is well separated from higher levels, completely determining thermodynamic magnetic properties. On this basis simplified spin Hamiltonians are derived for GAMMA1-GAMMA5 ground states in order to interpret thermodynamic measurements and ordering phenomena. (author)

  2. Actinide chemistry in ionic liquids.

    Takao, Koichiro; Bell, Thomas James; Ikeda, Yasuhisa

    2013-04-01

    This Forum Article provides an overview of the reported studies on the actinide chemistry in ionic liquids (ILs) with a particular focus on several fundamental chemical aspects: (i) complex formation, (ii) electrochemistry, and (iii) extraction behavior. The majority of investigations have been dedicated to uranium, especially for the 6+ oxidation state (UO2(2+)), because the chemistry of uranium in ordinary solvents has been well investigated and uranium is the most abundant element in the actual nuclear fuel cycles. Other actinides such as thorium, neptunium, plutonium, americium, and curiumm, although less studied, are also of importance in fully understanding the nuclear fuel engineering process and the safe geological disposal of radioactive wastes. PMID:22873132

  3. Actinide recovery techniques utilizing electromechanical processes

    Under certain conditions, the separation of actinides using electromechanical techniques may be an effective means of residue processing. The separation of granular mixtures of actinides and other materials discussed in this report is based on appreciable differences in the magnetic and electrical properties of the actinide elements. In addition, the high density of actinides, particularly uranium and plutonium, may render a simultaneous separation based on mutually complementary parameters. Both high intensity magnetic separation and electrostatic separation have been investigated for the concentration of an actinide waste stream. Waste stream constituents include an actinide metal alloy and broken quartz shards. The investigation of these techniques is in support of the Integral Fast Reactor (IFR) concept currently being developed at Argonne National Laboratory under the auspices of the Department of Energy

  4. Actinide Waste Forms and Radiation Effects

    Ewing, R. C.; Weber, W. J.

    Over the past few decades, many studies of actinides in glasses and ceramics have been conducted that have contributed substantially to the increased understanding of actinide incorporation in solids and radiation effects due to actinide decay. These studies have included fundamental research on actinides in solids and applied research and development related to the immobilization of the high level wastes (HLW) from commercial nuclear power plants and processing of nuclear weapons materials, environmental restoration in the nuclear weapons complex, and the immobilization of weapons-grade plutonium as a result of disarmament activities. Thus, the immobilization of actinides has become a pressing issue for the twenty-first century (Ewing, 1999), and plutonium immobilization, in particular, has received considerable attention in the USA (Muller et al., 2002; Muller and Weber, 2001). The investigation of actinides and

  5. Anthropogenic Actinides in the Environment

    The use of nuclear energy and the testing of nuclear weapons have led to significant releases of anthropogenic isotopes, in particular a number of actinide isotopes generally not abundant in nature. Most prominent amongst these are 239Pu, 240Pu, and 236U. The study of these actinides in nature has been an active field of study ever since. Measurements of actinides are applied to nuclear safeguards, investigating the sources of contamination, and as a tracer for a number of erosion and hydrology studies. Accelerator Mass Spectrometry (AMS) is ideally suited for these studies and generally offers higher sensitivities than competing techniques, like ICP-MS or decay counting. Recent advances in AMS allow the study of “minor” plutonium isotopes (241Pu, 242Pu, and 244Pu). Furthermore, 236U can now be measured at the levels expected from the global stratospheric fall-out of the atmospheric nuclear weapon tests in the 1950s and 1960s. Even the pre-anthropogenic isotope ratios could be within reach. However, the distribution and abundance levels of these isotopes are not well known yet. I will present an overview of the field, and in detail two recent studies on minor plutonium isotopes and 236U, respectively.(author)

  6. PWRs potentialities for minor actinides burning

    In the frame of the SPIN program at CEA, the impacts of the minor actinides (MA) incineration in PWRs are analysed. The aim is to reduce the mass, the potential radiotoxicity level. The recycling of all actinide elements is evaluated in a PWR nuclear yard. A sensitivity study is done to evaluate the incineration for each minor actinide element. This gives the most efficient way of incineration for each MA elements in a PWR and helps to design a PWR burner. This burner is disposed in a PWR nuclear system in which the actinides are recycled until equilibrium. (author)

  7. Research on the chemical speciation of actinides

    A demand for the safe and effective management of spent nuclear fuel and radioactive waste generated from nuclear power plant draws increasing attention with the growth of nuclear power industry. The objective of this project is to establish the basis of research on the actinide chemistry by using highly sensitive and advanced laser-based spectroscopic systems. Researches on the chemical speciation of actinides are prerequisite for the development of technologies related to nuclear fuel cycles, especially, such as the safe management of high level radioactive wastes and the chemical examination of irradiated nuclear fuels. For supporting these technologies, laser-based spectroscopies have been applied for the chemical speciation of actinide in aqueous solutions and the quantitative analysis of actinide isotopes in spent nuclear fuels. In this report, results on the following subjects have been summarized. Development of TRLFS technology for the chemical speciation of actinides, Development of laser-induced photo-acoustic spectroscopy (LPAS) system, Application of LIBD technology to investigate dynamic behaviors of actinides dissolution reactions, Development of nanoparticle analysis technology in groundwater using LIBD, Chemical speciation of plutonium complexes by using a LWCC system, Development of LIBS technology for the quantitative analysis of actinides, Evaluation on the chemical reactions between actinides and humic substances, Spectroscopic speciation of uranium-ligand complexes in aqueous solution, Chemical speciation of actinides adsorbed on metal oxides surfaces

  8. Long-term plant availability of actinides

    Environmental releases of actinide elements raise issues about which data are very limited. Quantitative information is required to assess the long-term behavior of actinides and their potential hazards resulting from the transport through food chains leading to man. Of special interest is the effect of time on the changes in the availability of actinide elements for uptake by plants from soil. This study provides valuable information on the effects of weathering and aging on the uptake of actinides from soil by range and crop plants grown under realistic field conditions

  9. Chemistry of actinides and fission products

    This task is concerned primarily with the fundamental chemistry of the actinide and fission product elements. Special efforts are made to develop research programs in collaboration with researchers at universities and in industry who have need of national laboratory facilities. Specific areas currently under investigation include: (1) spectroscopy and photochemistry of actinides in low-temperature matrices; (2) small-angle scattering studies of hydrous actinide and fission product polymers in aqueous and nonaqueous solvents; (3) kinetic and thermodynamic studies of complexation reactions in aqueous and nonaqueous solutions; and (4) the development of inorganic ion exchange materials for actinide and lanthanide separations. Recent results from work in these areas are summarized here

  10. Calculated Atomic Volumes of the Actinide Metals

    Skriver, H.; Andersen, O. K.; Johansson, B.

    1979-01-01

    The equilibrium atomic volume is calculated for the actinide metals. It is possible to account for the localization of the 5f electrons taking place in americium.......The equilibrium atomic volume is calculated for the actinide metals. It is possible to account for the localization of the 5f electrons taking place in americium....

  11. Environmental chemistry of the actinide elements

    The environmental chemistry of the actinide elements is a new branch of science developing with the application of nuclear energy on a larger and larger scale. Various aspects of the environmental chemistry of the actinide elements are briefly reviewed in this paper, such as its significance in the nuclear waste disposal, its coverage of research fields and possible directions for future study

  12. PIE analysis for minor actinide

    Minor actinide (MA) is generated in nuclear fuel during the operation of power reactor. For fuel design, reactivity decrease due to it should be considered. Out of reactors, MA plays key role to define the property of spent fuel (SF) such as α-radioactivity, neutron emission rate, and criticality of SF. In order to evaluate the calculation codes and libraries for predicting the amount of MA, comparison between calculation results and experimentally obtained data has been conducted. In this report, we will present the status of PIE data of MA taken by post irradiation examinations (PIE) and several calculation results. (author)

  13. Actinides analysis by accelerator mass spectrometry

    At the ANTARES accelerator at ANSTO a new beamline has been commissioned, incorporating new magnetic and electrostatic analysers, to optimise the efficiency for Actinides detection by Accelerator Mass Spectrometry (AMS). The detection of Actinides, particularly the isotopic ratios of uranium and plutonium, provide unique signatures for nuclear safeguards purposes. We are currently engaged in a project to evaluate the application of AMS to the measurement of Actinides in environmental samples for nuclear safeguards. Levels of certain fission products, Actinides and other radioactive species can be used as indicators of undeclared nuclear facilities or activities, either on-going or in the past Other applications of ultra-sensitive detection of Actinides are also under consideration. neutron-attenuation images of a porous reservoir rock

  14. Actinide ion sensor for pyroprocess monitoring

    Jue, Jan-fong; Li, Shelly X.

    2014-06-03

    An apparatus for real-time, in-situ monitoring of actinide ion concentrations which comprises a working electrode, a reference electrode, a container, a working electrolyte, a separator, a reference electrolyte, and a voltmeter. The container holds the working electrolyte. The voltmeter is electrically connected to the working electrode and the reference electrode and measures the voltage between those electrodes. The working electrode contacts the working electrolyte. The working electrolyte comprises an actinide ion of interest. The reference electrode contacts the reference electrolyte. The reference electrolyte is separated from the working electrolyte by the separator. The separator contacts both the working electrolyte and the reference electrolyte. The separator is ionically conductive to the actinide ion of interest. The reference electrolyte comprises a known concentration of the actinide ion of interest. The separator comprises a beta double prime alumina exchanged with the actinide ion of interest.

  15. The ALMR actinide burning system

    The advanced liquid-metal reactor (ALMR) actinide burning system is being developed under the sponsorship of the US Department of Energy to bring its unique capabilities to fruition for deployment in the early 21st century. The system consists of four major parts: the reactor plant, the metal fuel and its recycle, the processing of light water reactor (LWR) spent fuel to extract the actinides, and the development of a residual waste package. This paper addresses the status and outlook for each of these four major elements. The ALMR is being developed by an industrial group under the leadership of General Electric (GE) in a cost-sharing arrangement with the US Department of Energy. This effort is nearing completion of the advanced conceptual design phase and will enter the preliminary design phase in 1994. The innovative modular reactor design stresses simplicity, economics, reliability, and availability. The design has evolved from GE's PRISM design initiative and has progressed to the final stages of a prelicensing review by the US Nuclear Regulatory Commission (NRC); a safety evaluation report is expected by the end of 1993. All the major issues identified during this review process have been technically resolved. The next design phases will focus on implementation of the basic safety philosophy of passive shutdown to a safe, stable condition, even without scram, and passive decay heat removal. Economic projections to date show that it will be competitive with non- nuclear and advanced LWR nuclear alternatives

  16. Fast neutron scattering on actinide nuclei

    More and more sophisticated neutron experiments have been carried out with better samples in several laboratories and it was necessary to intercompare them. In this respect, let us quote for example (n,n'e) and (n,n'#betta#) measurements. Moreover, high precision (p,p), (p,p') and (p,n) measurements have been made, thus supplementing neutron experiments in the determination of the parameters of the optical model, still widely used to describe the neutron-nucleus interaction. The optical model plays a major role and it is therefore essential to know it well. The spherical optical model is still very useful, especially because of its simplicity and of the relatively short calculation times, but is obviously insufficient to treat deformed nuclei such as actinides. For accurate calculations about these nuclei, it is necessary to use a deformed potential well and solve a set of coupled equations, hence long computational times. The importance of compound nucleus formation at low energy requires also a good knowledge of the statistical model together with that of all the reaction mechanisms which are involved, including fission for which an accurate barrier is necessary and, of course, well-adjusted level densities. The considerations form the background of the Scientific Programme set up by a Programme Committee whose composition is given further on in this book

  17. Extraction chemistry of some bidentate organophosphorus compounds

    Martella, L.L.; Navratil, J.D.; Santiago, W.F.

    1978-01-01

    The extraction chemistry of methylenediphosphonates, carbamoylphosphonates, and carbamoylmethylenephosphonates has been investigated. The bidentate organophosphorus compounds extract actinides strongly, extract lanthanides, iron, gallium, molybdenum, titanium, vanadium, and zirconium partially, and do not extract most other elements from 5 to 7 M nitric acid. The properties of the extractants and extraction mechanisms are discussed. The effect of complexing agents on the extraction of actinides and lanthanides is also presented.

  18. Actinide chemistry in the far field

    The environmental chemistry of the actinides is complicated due both to the extensive redox and coordination chemistry of the elements and also to the complexity of the reactive phases encountered in natural environments. In the far field, interactions with reactive surfaces, coatings and colloidal particles will play a crucial role in controlling actinide mobility. By virtue of both their abundance and reactivity; clays and other layer aluminosilicate minerals, hydrous oxides and organic matter (humic substances) are all identified as having the potential to react with actinide ions and some possible modes of interaction are described, together with experimental evidence for their occurrence. (author)

  19. Electronic structure and magnetic properties of actinides

    The study of the actinide series shows the change between transition metal behavior and lanthanide behavior, between constant weak paramagnetism for thorium and strong Curie-Weiss paramagnetism for curium. Curium is shown to be the first metal of the actinide series to be magnetically ordered, its Neel temperature being 52K. The magnetic properties of the actinides depending on all the peripheral electrons, their electronic structure was studied and an attempt was made to determine it by means of a phenomenological model. Attempts were also made to interrelate the different physical properties which depend on the outer electronic structure

  20. X-ray study of chemical bonding in actinides(IV) and lanthanides(III) hexa-cyanoferrates

    Bimetallic cyanide molecular solids derived from Prussian blue are well known to foster long-range magnetic ordering and show an intense inter-valence charge transfer band resulting from an exchange interaction through the cyanide-bridge. For those reasons the ferrocyanide and ferricyanide building blocks have been chosen to study electronic delocalization and covalent character in actinide bonding using an experimental and theoretical approach based on X-ray absorption spectroscopy. In 2001, the actinide (IV) and early lanthanides (III) hexacyanoferrate have been found by powder X-ray diffraction to be isostructural (hexagonal, P63/m group). Here, extended X-ray Absorption Fine Structure (EXAFS) at the iron K-edge and actinide L3-edge have been undertaken to probe the local environment of both actinides and iron cations. In an effort to describe the cyano bridge, a double edge fitting procedure including both iron and actinide edges and based on multiple scattering approach has been developed. We have also investigated the electronic properties of these molecular solids. Low energy electronic transitions have been used iron L2,3 edge, nitrogen and carbon K-edge and also actinides N4,5 edge to directly probe the valence molecular orbitals of the complex. Using a phenomenological approach, a clear distinctive behaviour between actinides and lanthanides has been shown. Then a theoretical approach using quantum chemistry calculation has shown more specifically the effect of covalency in the actinide-ferrocyanide bond. More specifically, π interactions were underlined by both theoretical and experimental methods. Finally, in agreement with the ionic character of the lanthanide bonding no inter-valence charge transfer has been observed in the corresponding optical spectra of these compounds. On the contrary, optical spectra for actinides adducts (except for thorium) show an intense inter-valence charge transfer band like in the transition metal cases which is

  1. Endohedral Fullerenes with Actinide-Actinide Bonds: Unwilling Bonding in U2@C80

    Foroutan-Nejad, C.; Patzschke, M.; Straka, Michal

    Opole: -, 2014. [MMNB 2014. Polish-Taiwanese Conference. From Molecular Modeling to Nano- and Biotechnology . 04.09.2014-06.09.2014, Opole] R&D Projects: GA ČR(CZ) GA14-03564S Grant ostatní: European Social Fund(XE) CZ.1.07/2.3.00/30.009 Institutional support: RVO:61388963 Keywords : endohedral actinide fullerene * U-U bonding * actinide-actinide bonding Subject RIV: CF - Physical ; Theoretical Chemistry

  2. Actinide recovery from pyrochemical residues

    We demonstrated a new process for recovering plutonium and americium from pyrochemical waste. The method is based on chloride solution anion exchange at low acidity, or acidity that eliminates corrosive HCl fumes. Developmental experiments of the process flow chart concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 62- from high-chloride low-acid solution. Americium and other metals are washed from the ion exchange column with lN HNO3-4.8M NaCl. After elution, plutonium is recovered by hydroxide precipitation, and americium is recovered by NaHCO3 precipitation. All filtrates from the process can be discardable as low-level contaminated waste. Production-scale experiments are in progress for MSE residues. Flow charts for actinide recovery from electro-refining and direct oxide reduction residues are presented and discussed

  3. PF-4 actinide disposition strategy

    The dwindling amount of Security Category I processing and storage space across the DOE Complex has driven the need for more effective storage of nuclear materials at LANL's Plutonium Facility's (PF-4's) vault. An effort was begun in 2009 to create a strategy, a roadmap, to identify all accountable nuclear material and determine their disposition paths, the PF-4 Actinide Disposition Strategy (PADS). Approximately seventy bins of nuclear materials with similar characteristics - in terms of isotope, chemical form, impurities, disposition location, etc. - were established in a database. The ultimate disposition paths include the material to remain at LANL, disposition to other DOE sites, and disposition to waste. If all the actions described in the document were taken, over half of the containers currently in the PF-4 vault would been eliminated. The actual amount of projected vault space will depend on budget and competing mission requirements, however, clearly a significant portion of the current LANL inventory can be either dispositioned or consolidated.

  4. Subsurface interactions of actinide species and microorganisms. Implications for the bioremediation of actinide-organic mixtures

    By reviewing how microorganisms interact with actinides in subsurface environments, the way how bioremediation controls the fate of actinides is assessed. Actinides often are co-contaminants with strong organic chelators, chlorinated solvents, and fuel hydrocarbons. Bioremediation can immobilize the actinides, biodegrade the co-contaminants, or both. Actinides at the IV oxidation state are the least soluble, and microorganisms accelerate precipitation by altering the actinide's oxidation state or its speciation. The way how microorganisms directly oxidize or reduce actinides and how microbiological reactions that biodegrade strong organic chelators, alter the pH, and consume or produce precipitating anions strongly affect actinide speciation and, therefore, mobility is described. Why inhibition caused by chemical or radiolytic toxicities uniquely affects microbial reactions is explained. Due to the complex interactions of the microbiological and chemical phenomena, mathematical modeling is an essential tool for research on and application of bioremediation involving co-contamination with actinides. Development of mathematical models that link microbiological and geochemical reactions is described. Throughout, the key research needs are identified. (author)

  5. Subsurface interactions of actinide species and microorganisms : implications for the bioremediation of actinide-organic mixtures.

    Banaszak, J.E.; Reed, D.T.; Rittmann, B.E.

    1999-02-12

    By reviewing how microorganisms interact with actinides in subsurface environments, we assess how bioremediation controls the fate of actinides. Actinides often are co-contaminants with strong organic chelators, chlorinated solvents, and fuel hydrocarbons. Bioremediation can immobilize the actinides, biodegrade the co-contaminants, or both. Actinides at the IV oxidation state are the least soluble, and microorganisms accelerate precipitation by altering the actinide's oxidation state or its speciation. We describe how microorganisms directly oxidize or reduce actinides and how microbiological reactions that biodegrade strong organic chelators, alter the pH, and consume or produce precipitating anions strongly affect actinide speciation and, therefore, mobility. We explain why inhibition caused by chemical or radiolytic toxicities uniquely affects microbial reactions. Due to the complex interactions of the microbiological and chemical phenomena, mathematical modeling is an essential tool for research on and application of bioremediation involving co-contamination with actinides. We describe the development of mathematical models that link microbiological and geochemical reactions. Throughout, we identify the key research needs.

  6. Subsurface interactions of actinide species and microorganisms : implications for the bioremediation of actinide-organic mixtures

    By reviewing how microorganisms interact with actinides in subsurface environments, we assess how bioremediation controls the fate of actinides. Actinides often are co-contaminants with strong organic chelators, chlorinated solvents, and fuel hydrocarbons. Bioremediation can immobilize the actinides, biodegrade the co-contaminants, or both. Actinides at the IV oxidation state are the least soluble, and microorganisms accelerate precipitation by altering the actinide's oxidation state or its speciation. We describe how microorganisms directly oxidize or reduce actinides and how microbiological reactions that biodegrade strong organic chelators, alter the pH, and consume or produce precipitating anions strongly affect actinide speciation and, therefore, mobility. We explain why inhibition caused by chemical or radiolytic toxicities uniquely affects microbial reactions. Due to the complex interactions of the microbiological and chemical phenomena, mathematical modeling is an essential tool for research on and application of bioremediation involving co-contamination with actinides. We describe the development of mathematical models that link microbiological and geochemical reactions. Throughout, we identify the key research needs

  7. International Workshop on Orbital and Spin Magnetism of Actinides (IWOSMA-3)

    Temmerman, W; Tobin, J; der Laan, G v

    2006-11-08

    This International Workshop on Orbital and Spin Magnetism of Actinides (IWOSMA) is the third in a series. The first workshop took place in Daresbury in 1999 and the second in Berkeley, CA, USA in 2002. These workshops are informal gatherings of theoreticians and experimentalists addressing the latest issues in the electronic and magnetic properties of actinides. The magnetism of transition metal systems and lanthanide systems is now fairly well understood, where d and f electrons can be described in a delocalized and localized model, respectively. On the other hand, actinide systems do not fit in such a description. The localization of the 5f is in between that of the 3d and 4f and the strong spin-orbit interaction necessitates a relativistic approach. Furthermore, electron correlation effects play a major role in these compounds. Recently, it has become possible to determine element-specific magnetic moments using neutron diffraction and x-ray scattering and absorption. The latter technique makes it even possible to separate the orbital and spin contribution to the total magnetic moment. The results are very interesting but difficult to reproduce with present state-of-art calculations. Not only a very large orbital polarization but also a large magnetic dipole term has been measured in cubic compounds, such as US. This allows for severe testing of the extra terms included in band theory to account for orbital polarization. It is also clear that deeper insight in magnetism can be obtained by studying the unusual behavior of the actinides. The recent development and application of such techniques as DMFT could contribute to the understanding of magnetism in actinides. Despite the fact that actinides for health reasons will find less application in technological market products, the understanding of their magnetic and electronic properties will no doubt provide key elements for a general description of electron correlation and relativistic effects.

  8. Overview of actinide chemistry in the WIPP

    Borkowski, Marian [Los Alamos National Laboratory; Lucchini, Jean - Francois [Los Alamos National Laboratory; Richmann, Michael K [Los Alamos National Laboratory; Reed, Donald T [Los Alamos National Laboratory; Khaing, Hnin [Los Alamos National Laboratory; Swanson, Juliet [Los Alamos National Laboratory

    2009-01-01

    The year 2009 celebrates 10 years of safe operations at the Waste Isolation Pilot Plant (WIPP), the only nuclear waste repository designated to dispose defense-related transuranic (TRU) waste in the United States. Many elements contributed to the success of this one-of-the-kind facility. One of the most important of these is the chemistry of the actinides under WIPP repository conditions. A reliable understanding of the potential release of actinides from the site to the accessible environment is important to the WIPP performance assessment (PA). The environmental chemistry of the major actinides disposed at the WIPP continues to be investigated as part of the ongoing recertification efforts of the WIPP project. This presentation provides an overview of the actinide chemistry for the WIPP repository conditions. The WIPP is a salt-based repository; therefore, the inflow of brine into the repository is minimized, due to the natural tendency of excavated salt to re-seal. Reducing anoxic conditions are expected in WIPP because of microbial activity and metal corrosion processes that consume the oxygen initially present. Should brine be introduced through an intrusion scenario, these same processes will re-establish reducing conditions. In the case of an intrusion scenario involving brine, the solubilization of actinides in brine is considered as a potential source of release to the accessible environment. The following key factors establish the concentrations of dissolved actinides under subsurface conditions: (1) Redox chemistry - The solubility of reduced actinides (III and IV oxidation states) is known to be significantly lower than the oxidized forms (V and/or VI oxidation states). In this context, the reducing conditions in the WIPP and the strong coupling of the chemistry for reduced metals and microbiological processes with actinides are important. (2) Complexation - For the anoxic, reducing and mildly basic brine systems in the WIPP, the most important

  9. PWRs potentialities for minor actinides burning

    In the frame of the SPIN program at CEA, the impacts of the Minor Actinides (MA) incineration in PWRs are analysed. The aim is to reduce the mass and the potential radiotoxicity level. This study is done separately one on the Plutonium recycling. But the plutonium is essential. Thus, the recycling of all Actinide elements is evaluated in a PWR nuclear yard. A sensitivity study is done to evaluate the incineration for each Minor Actinide element. This gives us the most efficient way of incineration for each MA element in a PWR and help us to design a PWR burner. This burner is disposed in a PWR nuclear system in which the Actinides are recycled until equilibrium. (authors). 2 refs

  10. Electronic structure and correlation effects in actinides

    Albers, R.C.

    1998-12-01

    This report consists of the vugraphs given at a conference on electronic structure. Topics discussed are electronic structure, f-bonding, crystal structure, and crystal structure stability of the actinides and how they are inter-related.

  11. Preparation of actinide targets by electrodeposition

    Trautmann, N.; Folger, H.

    1989-10-01

    Actinide targets with varying thicknesses on different substrates have been prepared by electrodeposition either from aqueous solutions or from solutions of their nitrates in isopropyl alcohol. With these techniques the actinides can be deposited almost quantitatively on various backing materials within 15 to 30 min. Targets of thorium, uranium, neptunium, plutonium, americium, curium and californium with areal densities from almost carrier-free up to 1.4 mg/cm 2 on thin beryllium, carbon, titanium, tantalum and platinum foils have been prepared. In most cases, prior to the deposition, the actinides had to be purified chemically and for some of them, due to the limited amount of material available, recycling procedures were required. Applications of actinide targets in heavy-ion reactions are briefly discussed.

  12. Actinide research to solve some practical problems

    The following topics are discussed: generation of plutonium inventories by nuclear power plants; resettlement of the Marshallese Islanders into an actinide contaminated environment; high radiation background areas of the world; and radiation hazards to uranium miners

  13. Advanced Aqueous Separation Systems for Actinide Partitioning

    Nash, Kenneth L.; Clark, Sue; Meier, G Patrick; Alexandratos, Spiro; Paine, Robert; Hancock, Robert; Ensor, Dale

    2012-03-21

    One of the most challenging aspects of advanced processing of spent nuclear fuel is the need to isolate transuranium elements from fission product lanthanides. This project expanded the scope of earlier investigations of americium (Am) partitioning from the lanthanides with the synthesis of new separations materials and a centralized focus on radiochemical characterization of the separation systems that could be developed based on these new materials. The primary objective of this program was to explore alternative materials for actinide separations and to link the design of new reagents for actinide separations to characterizations based on actinide chemistry. In the predominant trivalent oxidation state, the chemistry of lanthanides overlaps substantially with that of the trivalent actinides and their mutual separation is quite challenging.

  14. BWR Assembly Optimization for Minor Actinide Recycling

    G. Ivan Maldonado; John M. Christenson; J.P. Renier; T.F. Marcille; J. Casal

    2010-03-22

    The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs).

  15. New molecules to separate actinides: the picolinamides

    The reprocessing of spent fuel is made with the Purex process, funded on liquid-liquid extraction of uranium nitrates(VI) and plutonium nitrates(IV) by the BTP (tributyl phosphate). To improve this proceeding, we look for extractants which allow, beyond U and Pu extractions, these of actinides (II) and allow separation of the whole actinides from the fission products, which have an important fraction of lanthanides. A new family seems to give good results: the picolinamides

  16. Lattice effects in the light actinides

    The light actinides show a variety of lattice effects that do not normally appear in other regions of the periodic table. The article will cover the crystal structures of the light actinides, their atomic volumes, their thermal expansion behavior, and their elastic behavior as reflected in recent thermal vibration measurements made by neutron diffraction. A discussion of the melting points will be given in terms of the thermal vibration measurements. Pressure effects will be only briefly indicated

  17. Evaluation of actinide partitioning and transmutation

    After a few centuries of radioactive decay the long-lived actinides, the elements of atomic numbers 89-103, may constitute the main potential radiological health hazard in nuclear wastes. This is because all but a very few fission products (principally technetium-99 and iodine-129) have by then undergone radioactive decay to insignificant levels, leaving the actinides as the principal radionuclides remaining. It was therefore at first sight an attractive concept to recycle the actinides to nuclear reactors, so as to eliminate them by nuclear fission. Thus, investigations of the feasibility and potential benefits and hazards of the concept of 'actinide partitioning and transmutation' were started in numerous countries in the mid-1970s. This final report summarizes the results and conclusions of technical studies performed in connection with a four-year IAEA Co-ordinated Research Programme, started in 1976, on the ''Environmental Evaluation and Hazard Assessment of the Separation of Actinides from Nuclear Wastes followed by either Transmutation or Separate Disposal''. Although many related studies are still continuing, e.g. on waste disposal, long-term safety assessments, and waste actinide management (particularly for low and intermediate-level wastes), some firm conclusions on the overall concept were drawn by the programme participants, which are reflected in this report

  18. Fabrication of indigenous computer controlled photoacoustic spectrometer for actinide spectroscopy

    The photoacoustic spectroscopy (PAS) monitoring the non-radiative de-excitation process is a powerful tool for investigating the absorption spectra of almost any type of samples like opaque solids, turbid solutions etc. Actinide compounds due to high probability of non-radiative relaxation process are good candidates for PAS investigations and also without any need for good optical quality crystals of these compounds. In addition, this technique is extremely useful for determination of thermal properties like thermal conductivity, diffusivity and related properties like phase transitions, thickness of thin film etc. In the present paper details of fabrication of indigenous PAS unit using low cost easily available components and interfacing this unit to a personal computer are given

  19. Multiconfigurational quantum chemistry for actinide containing systems: from isolated molecules to condensed phase

    Complete text of publication follows: Ab initio quantum chemistry is a mature science that allows the study of molecular species containing any of the atoms in the periodic system. In this lecture I will describe our latest achievements in the prediction of novel chemical bonds and chemical species, including the multiple bond in the early-di-actinide series [1] and some novel inorganic compounds containing the di-uranium moiety [2]. In nature most of actinide chemistry occurs in solution. We try to combine ab initio quantum chemistry with classical molecular dynamics simulations in order to understand the behavior of highly charged ions in solution. Our recent studies of uranyl [3] and Cm(III) [4] in water will be presented. References: [1] B. O. Roos, P.-A. Malmqvist and L. Gagliardi, Exploring the actinide-actinide bond: Theoretical studies of the chemical bond in Ac2, Th2, Pa2, and U2 J. Am. Chem. Soc. 128, 17000-17006 (2006) [2] G. La Macchia, M. Brynda, and L. Gagliardi, Quantum chemical calculations predict the diphenyl di-uranium compound, PhUUPh, to have a stable 1Ag ground state Angew. Chem. Int. Ed. 45, 6210-6213 (2006); [3] D. Hagberg, G. Karlstrom, B .O. Roos and L. Gagliardi, The coordination of uranyl in water: a combined quantum chemical and molecular simulation study J. Am. Chem. Soc. 127, 14250-14256 (2005); [4] E. Bednarz, D. Hagberg, L. Gagliardi in preparation

  20. Use of high gradient magnetic separation for actinide application

    Decontamination of materials such as soils or waste water that contain radioactive isotopes, heavy metals, or hazardous components is a subject of great interest. Magnetic separation is a physical separation process that segregates materials on the basis of magnetic susceptibility. Because the process relies on physical properties, separations can be achieved while producing a minimum of secondary waste. Most traditional physical separation processes effectively treat particles larger than 70 microns. In many situations, the radioactive contaminants are found concentrated in the fine particle size fraction of less than 20 microns. For effective decontamination of the fine particle size fraction most current operations resort to chemical dissolution methods for treatment. High gradient magnetic separation (HGMS) is able to effectively treat particles from 90 to ∼0.1 micron in diameter. The technology is currently used on the 60 ton per hour scale in the kaolin clay industry. When the field gradient is of sufficiently high intensity, paramagnetic particles can be physically captured and separated from extraneous nonmagnetic material. Because all actinide compounds are paramagnetic, magnetic separation of actinide containing mixtures is feasible. The advent of reliable superconducting magnets also makes magnetic separation of weakly paramagnetic species attractive. HGMS work at Los Alamos National Laboratory (LANL) is being developed for soil remediation, waste water treatment and treatment of actinide chemical processing residues. LANL and Lockheed Environmental Systems and Technologies Company (LESAT) have worked on a co-operative research and development agreement (CRADA) to develop HGMS for radioactive soil decontamination. The program is designed to transfer HGMS from the laboratory and other industries for the commercial treatment of radioactive contaminated materials. 9 refs., 2 figs., 2 tabs

  1. Radioecology of the actinide elements

    Research progress is reported in sections entitled: scope of studies supported by the Department of Energy; oxidation state diagrams are a potential tool for studying the redox chemistry of Pu in natural waters; studies are initiated to investigate the effect of pH and organic matter on the distribution coefficients of Cm with natural sediments; the relative distributions of resuspended and direct deposited Pu in a corn canopy are quantified; the retention of Pu surface contamination by corn plants is being studied; Pu concentrations in tobacco are being determined; concentrations of Pu per unit mass and per unit surface area are compared for subterranean crops; models of Pu behavior in agricultural crops are being validated; distribution of aerially released Pu in loblolly pine plantations is independent of deposition rate; investigation of the effects of chelate and redox potential of the uptake of Pu and Cm by rice is underway; studies of Cm cycling in a floodplain forest have been initiated; the effects of unusually large Pu deposition onto a wheat ecosystem are being studied using computer simulations; long-term kinetic models of Pu behavior in plant-soil systems are being developed; scope of studies supported by the Nuclear Regulatory Commission; growth form of broadleaf crop may affect Pu contents; root uptake of Pu and Cm measured for rice root uptake of Pu and Cm measured for rice; long-term actinide uptake study is continuing at SREL; and uranium cycling in major southeastern agricultural crops being studied

  2. Actinide transmutation in nuclear reactors

    An optimization method is developed to maximize the burning capability of the ALMR while complying with all constraints imposed on the design for reliability and safety. This method leads to a maximal transuranics enrichment, which is being limited by constraints on reactivity. The enrichment can be raised by using the neutrons less efficiently by increasing leakage from the fuel. With the developed optimization method, a metallic and an oxide fueled ALMR were optimized. Both reactors perform equally well considering the burning of transuranics. However, metallic fuel has a much higher heat conductivity coefficient, which in general leads to better safety characteristics. In search of a more effective waste transmuter, a modified Molten Salt Reactor was designed. A MSR operates on a liquid fuel salt which makes continuous refueling possible, eliminating the issue of the burnup reactivity loss. Also, a prompt negative reactivity feedback is possible for an overmoderated reactor design, even when the Doppler coefficient is positive, due to the fuel expansion with fuel temperature increase. Furthermore, the molten salt fuel can be reprocessed based on a reduction process which is not sensitive to the short-lived spontaneously fissioning actinides. (orig./HP)

  3. Unconventional excitations and critical behavior in actinide compounds

    The low lying electronic states of the uranium ion, at present imperfectly understood, have been probed by neutron inelastic scattering methods. In the rock-salt structure pnictides and chalcogenides the character of the magnetic excitations and the magnitudes of the ordered moments are highly sensitive to the U-U distance. For example, in the ferromagnetic chalcogenides, US with the smallest U-U distance exhibits only a broad distribution of scattering at low temperatures, whereas UTe with the largest U-U spacing exhibits several distinct branches of excitations. Similarly, for the antiferromagnetic pnictides those with small U-U distance (UN, UAs) exhibit only a broad magnetic response with no sign of the sharp collective features seen in USb. The pnictides exhibit very anisotropic longitudinal spin correlations above T/sub N/. For UN a dynamical scaling model has been obtained which incorporates the anisotropy and describes the linewidths of the critical scattering accurately

  4. Use of fast reactors for actinide transmutation

    The management of radioactive waste is one of the key issues in today's discussions on nuclear energy, especially the long term disposal of high level radioactive wastes. The recycling of plutonium in liquid metal fast breeder reactors (LMFBRs) would allow 'burning' of the associated extremely long life transuranic waste, particularly actinides, thus reducing the required isolation time for high level waste from tens of thousands of years to hundreds of years for fission products only. The International Working Group on Fast Reactors (IWGFR) decided to include the topic of actinide transmutation in liquid metal fast breeder reactors in its programme. The IAEA organized the Specialists Meeting on Use of Fast Breeder Reactors for Actinide Transmutation in Obninsk, Russian Federation, from 22 to 24 September 1992. The specialists agree that future progress in solving transmutation problems could be achieved by improvements in: Radiochemical partitioning and extraction of the actinides from the spent fuel (at least 98% for Np and Cm and 99.9% for Pu and Am isotopes); technological research and development on the design, fabrication and irradiation of the minor actinides (MAs) containing fuels; nuclear constants measurement and evaluation (selective cross-sections, fission fragments yields, delayed neutron parameters) especially for MA burners; demonstration of the feasibility of the safe and economic MA burner cores; knowledge of the impact of maximum tolerable amount of rare earths in americium containing fuels. Refs, figs and tabs

  5. Waste disposal aspects of actinide separation

    Two recent NRPB reports are summarized (Camplin, W.C., Grimwood, P.D. and White, I.F., The effects of actinide separation on the radiological consequences of disposal of high-level radioactive waste on the ocean bed, Harwell, National Radiological Protection Board, NRPB-R94 (1980), London, HMSO; Hill, M.D., White, I.F. and Fleishman, A.B., The effects of actinide separation on the radiological consequences of geologic disposal of high-level waste. Harwell, National Radiological Protection Board, NRPB-R95 (1980), London, HMSO). They describe preliminary environmental assessments relevant to waste arising from the reprocessing of PWR fuel. Details are given of the modelling of transport of radionuclides to man, and of the methodology for calculating effective dose equivalents in man. Emphasis has been placed on the interaction between actinide separation and the disposal options rather than comparison of disposal options. The reports show that the effects of actinide separation do depend on the disposal method. Conditions are outlined where the required substantial further research and development work on actinide separation and recycle would be justified. Toxicity indices or 'toxic potentials' can be misleading and should not be used to guide research and development. (U.K.)

  6. Solubility of actinide surrogates in nuclear glasses

    This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium LIII XANES spectroscopy showed that the Ce3+/Cetotal ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 deg. C. Cerium LIII XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce3+ is shown to be more soluble than Ce4+ in this borosilicate glass

  7. New reagents for actinide-lanthanide group separations

    Organic extractants which possess nitrogen or sulfur donor atoms preferentially complex the trivalent actinide. They are potential reagents for actinide lanthanide group separations, which can be performed at low pH without the addition of inorganic salts

  8. Actinides and rare earths complexation with adenosine phosphate nucleotides

    Organophosphorus compounds are important molecules in both nuclear industry and living systems fields. Indeed, several extractants of organophosphorus compounds (such as TBP, HDEHP) are used in the nuclear fuel cycle reprocessing and in the biological field. For instance, the nucleotides are organophosphates which play a very important role in various metabolic processes. Although the literature on the interactions of actinides with inorganic phosphate is abundant, published studies with organophosphate compounds are generally limited to macroscopic and / or physiological approaches. The objective of this thesis is to study the structure of several organophosphorus compounds with actinides to reach a better understanding and develop new specific buildings blocks. The family of the chosen molecules for this procedure consists of three adenine nucleotides mono, bi and triphosphate (AMP, adenosine monophosphate - ADP, adenosine diphosphate - ATP, adenosine triphosphate) and an amino-alkylphosphate (AEP O-phosphoryl-ethanolamine). Complexes synthesis was conducted in aqueous and weakly acidic medium (2.8-4) for several lanthanides (III) (Lu, Yb, Eu) and actinides (U (VI), Th (IV) and Am (III)). Several analytical and spectroscopic techniques have been used to describe the organization of the synthesized complexes: spectrometric analysis performed by FTIR and NMR were used to identify the functional groups involved in the complexation, analysis by ESI-MS and pH-metric titration were used to determine the solution speciation and EXAFS analyzes were performed on Mars beamline of the SOLEIL synchrotron, have described the local cation environment, for both solution and solid compounds. Some theoretical approaches of DFT were conducted to identify stable structures in purpose of completing the experimental studies. All solid complexes (AMP, ADP, ATP and AEP) have polynuclear structures, while soluble ATP complexes are mononuclear. For all synthesized complexes, it has been

  9. Separation of actinides with alkylpyridinium salts

    Various f-elements are separated as anionic complexes from both acidic and alkaline solutions by precipitation with alkylpyridinium salts. The precipitates are also cationic surfactants where the simple counter-ion (e.g. nitrate or chloride) is replaced by the negatively charged complex anion of an actinide or lanthanide. The low solubility of these precipitates is explained by a strong affinity of divalent complex counter-ions of f-elements to the quaternary nitrogen. Precipitations in solutions of nitric acid allow to separate tetravalent f-elements from other metals, in alkaline carbonate solutions tetravalent and hexavalent actinides are precipitated simultaneously. The last procedure yields precipitates, which are very intimate mixtures of hexavalent and tetravalent actinides. This allows to prepare mixed oxides in a simple way. (author) 6 refs.; 3 figs.; 3 tabs

  10. Minior Actinide Doppler Coefficient Measurement Assessment

    Nolan E. Hertel; Dwayne Blaylock

    2008-04-10

    The "Minor Actinide Doppler Coefficient Measurement Assessment" was a Department of Energy (DOE) U-NERI funded project intended to assess the viability of using either the FLATTOP or the COMET critical assembly to measure high temperature Doppler coefficients. The goal of the project was to calculate using the MCNP5 code the gram amounts of Np-237, Pu-238, Pu-239, Pu-241, AM-241, AM-242m, Am-243, and CM-244 needed to produce a 1E-5 in reactivity for a change in operating temperature 800C to 1000C. After determining the viability of using the assemblies and calculating the amounts of each actinide an experiment will be designed to verify the calculated results. The calculations and any doncuted experiments are designed to support the Advanced Fuel Cycle Initiative in conducting safety analysis of advanced fast reactor or acceoerator-driven transmutation systems with fuel containing high minor actinide content.

  11. Research on Actinides in Nuclear Fuel Cycles

    The electrochemical/spectroscopic integrated measurement system was designed and set up for spectro-electrochemical measurements of lanthanide and actinide ions in high temperature molten salt media. A compact electrochemical cell and electrode system was also developed for the minimization of reactants, and consequently minimization of radioactive waste generation. By applying these equipment, oxidation and reduction behavior of lanthanide and actinide ions in molten salt media have been made. Also, thermodynamic parameter values are determined by interpreting the results obtained from electrochemical measurements. Several lanthanide ions exhibited fluorescence properties in molten salt. Also, UV-VIS measurement provided the detailed information regarding the oxidation states of lanthanide and actinide ions in high temperature molten salt media

  12. Coordination chemistry for new actinide separation processes

    The amount of wastes and the number of chemical steps can be decreased by replacing the PUREX process extractant (TBP) by, N.N- dialkylamides (RCONR'2). Large amounts of deep underground storable wastes can be stored into sub-surface disposals if the long lived actinide isotopes are removed. Spent nuclear fuels reprocessing including the partitioning of the minor actinides Np, Am, Cm and their transmutation into short half lives fission products is appealing to the public who is not favorable to the deep underground storage of large amounts of long half lived actinide isotopes. In this paper coordination chemistry problems related to improved chemical separations by solvent extraction are presented. 2 tabs.; 4 refs

  13. Ternary phase equilibria in the systems actinide-transition metal-carbon and actinide metal-nitrogen

    Isothermal sections in the ternary phase diagrams of actinide-transition metal-carbon and actinide-transition metal-nitrogen systems are compiled on the basis of new phase studies, using thermodynamic data of carbides and nitrides, and considering the structure and lattice parameters of binary compounds. The lack of experimental results is compensated by estimating the solution behaviour and the phase stabilities. Phase diagrams are given for the systems: Th-(U or Pu)-C, U-(Th or Pu)-N, (Th or U or Pu)-Y-C, (Th or U or Pu)-Ce-C, (Th or U or Pu)-Y-N, (Th or U or Pu)-Ce-N, U-(La or Ce or Pr or Nd)-N, (Th or U or Pu)-Ti-C, (Th or U or Pu)-Zr-C, (Th or U or Pu)-Nb-C, (Th or U or Pu)-Mo-C, U-(Ti or Zr or Hf or Mo)-N, (Th or Pu)-Zr-N, (Th or U or Pu)-Cr-N and (Th or U or Pu)-(Ru or Rh or Pd)-C. Of particular interest is the occurrence of ternary carbides and nitrides. (orig.)

  14. Actinide and fission product separation and transmutation

    NONE

    1993-07-01

    The second international information exchange meeting on actinide and fission product separation and transmutation, took place in Argonne National Laboratory in Illinois United States, on 11-13 November 1992. The proceedings are presented in four sessions: Current strategic system of actinide and fission product separation and transmutation, progress in R and D on partitioning processes wet and dry, progress in R and D on transmutation and refinements of neutronic and other data, development of the fuel cycle processes fuel types and targets. (A.L.B.)

  15. Actinide phosphonate complexes in aqueous solutions

    Complexes formed by actinides with carboxylic acids, polycarboxylic acids, and aminopolycarboxylic acids play a central role in both the basic and process chemistry of the actinides. Recent studies of f-element complexes with phosphonic acid ligands indicate that new ligands incorporating doubly ionizable phosphonate groups (-PO3H2) have many properties which are unique chemically, and promise more efficient separation processes for waste cleanup and environmental restoration. Simple diphosphonate ligands form much stronger complexes than isostructural carboxylates, often exhibiting higher solubility as well. In this manuscript recent studies of the thermodynamics and kinetics of f-element complexation by 1,1 and 1,2 diphosphonic acid ligands are described

  16. Actinide elements in aquatic and terrestrial environments

    Progress is reported on the following research projects: water-sediment interactions of U, Pu, Am, and Cm; relative availability of actinide elements from abiotic to aquatic biota; comparative uptake of transuranic elements by biota bordering Pond 3513; metabolic reduction of 239Np from Np(V) to Np(IV) in cotton rats; evaluation of hazards associated with transuranium releases to the biosphere; predicting Pu in bone; adsorption--solubility--complexation phenomena in actinide partitioning between sorbents and solution; comparative soil extraction data; and comparative plant uptake data

  17. Sequential analysis of selected actinides in urine

    The monitoring of personnel by urinalysis for suspected contamination by actinides necessitated the development and implementation of an analytical scheme that will separate and identify alpha emitting radionuclides of these elements. The present work deals with Pu, Am, and Th. These elements are separated from an ashed urine sample by means of coprecipitation and ion exchange techniques. The final analysis is carried out by electroplating the actinides and counting in a α-spectrometer. Mean recoveries of these elements from urine are: Pu 64%, Am 74% and Th 69%. (auth)

  18. Actinide and fission product separation and transmutation

    The second international information exchange meeting on actinide and fission product separation and transmutation, took place in Argonne National Laboratory in Illinois United States, on 11-13 November 1992. The proceedings are presented in four sessions: Current strategic system of actinide and fission product separation and transmutation, progress in R and D on partitioning processes wet and dry, progress in R and D on transmutation and refinements of neutronic and other data, development of the fuel cycle processes fuel types and targets. (A.L.B.)

  19. Imaging the formation of high-energy dispersion anomalies in the actinide UCoGa$_5$

    Das, Tanmoy; Durakiewicz, Tomasz; Zhu, Jian-Xin; Joyce, John J.; Sarrao, John L.; Graf, Matthias J.

    2012-01-01

    We use angle-resolved photoemission spectroscopy (ARPES) to image the emergence of substaintial dispersion anomalies in the electronic renormalization of the actinide compound UCoGa$_5$ which was presumed to belong to a conventional Fermi liquid family. Kinks or abrupt breaks in the slope of the quasiparticle dispersion are detected both at low ($\\sim$130 meV) and high ($\\sim$1 eV) binding energies below the Fermi energy, ruling out any significant contribution of phonons. We perform numerica...

  20. Coordination polymers: trapping of radionuclides and chemistry of tetravalent actinides (Th, U) carboxylates

    The use of nuclear energy obviously raises the question of the presence of radionuclides in the environment. Currently, their mitigation is a major issue associated with nuclear chemistry. This thesis focuses on both the trapping of radionuclides by porous solids called Metal-Organic Frameworks (MOF) and the crystal chemistry of the carboxylate of tetravalent actinides (AnIV). The academic knowledge of the reactivity of carboxylate of AnIV could help the understanding of actinides speciation in environment. We focused on the sequestration of iodine by aluminum based MOF. The functionalization (electron-donor group) of the MOF drastically enhances the iodine capture capacity. The removal of light actinides (Th and U) from aqueous solution was also investigated as well as the stability of (Al)-MOF under γ radiation. More than twenty coordination polymers based on tetravalent actinides have been synthesized and characterized by single crystal X-ray diffraction. The use of controlled hydrolysis promotes the formation of coordination polymers exhibiting polynuclear cluster ([U4], [Th6], [U6] and [U38]). In order to understand the formation of the largest cluster, the ex-situ study of the solvo-thermal synthesis of compound {U38} has also been investigated. (author)

  1. Influence of the structure of bidentate organophosphorus compounds and their extraction capacity

    This paper studies the variation of the extraction capacity within a broad series of didentate organophosphorus compounds, from diphosphine dioxides to carbamoylphosphine oxides and phosphonates. The authors consider the disputed questions of the coordination of the actinides when carbamoyl compounds are used and they consider whether an effect of anomalous aryl strenghening exists in these systems. The compounds used are presented. The extraction of microquantities of americium and other actinides was performed from nitric acid media

  2. Actinide recycle in LMFBRs as a waste management alternative

    Beaman, S.L.

    1979-08-21

    A strategy of actinide burnup in fast reactor systems has been investigated as an approach for reducing the long term hazards and storage requirements of the actinide waste elements and their decay daughters. The actinide recycle studies also included plutonium burnup studies in the event that plutonium is no longer required as a fuel. Particular emphasis was placed upon the timing of the recycle program, the requirements for separability of the waste materials, and the impact of the actinides on the reactor operations and performance. It is concluded that actinide recycle and plutonium burnout are attractive alternative waste management concepts. 25 refs., 14 figs., 34 tabs.

  3. Chemical compatibility of HLW borosilicate glasses with actinides

    During liquid storage of HLLW the formation of actinide enriched sludges is being expected. Also during melting of HLW glasses an increase of top-to-bottom actinide concentrations can take place. Both effects have been studied. Besides, the vitrification of plutonium enriched wastes from Pu fuel element fabrication plants has been investigated with respect to an isolated vitrification process or a combined one with the HLLW. It is shown that the solidification of actinides from HLLW and actinide waste concentrates will set no principal problems. The leaching of actinides has been measured in salt brine at 230C and 1150C. (orig.)

  4. Actinide recycle in LMFBRs as a waste management alternative

    A strategy of actinide burnup in fast reactor systems has been investigated as an approach for reducing the long term hazards and storage requirements of the actinide waste elements and their decay daughters. The actinide recycle studies also included plutonium burnup studies in the event that plutonium is no longer required as a fuel. Particular emphasis was placed upon the timing of the recycle program, the requirements for separability of the waste materials, and the impact of the actinides on the reactor operations and performance. It is concluded that actinide recycle and plutonium burnout are attractive alternative waste management concepts. 25 refs., 14 figs., 34 tabs

  5. Diphosphine dioxides as extractants for actinides (in connection with the problem of anomalous aryl strengthening of complexes)

    Extraction study of uranylnitrate, plutonium in trivalent, tetravalent and gexavalent states and trivalent americium, curium, praseodymium and promethium by alkyl, aromatic and mixed diphosphine dioxides is briefly outlined. The influence of diphosphine dioxide structures on their extraction capacity and, in particular, the problem of anomalous aryl strengthening of compounds, both of entropy and binding character, are considered. Perchlorate media, as opposed to nitrate ones, are characteristic for their high distribution coefficients and extraction equilibrium constants. Anomalous aryl strengthening of trivalent lanthanides and actinides can be applied, at the minimum, for solution purifications from the traces of actinides and lanthanides

  6. High-Pressure Synthesis and Characterization of New Actinide Borates, AnB4O8 (An=Th, U)

    Hinteregger, Ernst; Hofer, Thomas S.; Heymann, Gunter; Perfler, Lukas; Kraus, Florian; Huppertz, Hubert

    2013-01-01

    New actinide borates ThB4O8 and UB4O8 were synthesized under high-pressure, high-temperature conditions (5.5 GPa/1100 °C for thorium borate, 10.5 GPa/1100 °C for the isotypic uranium borate) in a Walker-type multianvil apparatus from their corresponding actinide oxide and boron oxide. The crystal structure was determined on basis of single-crystal X-ray diffraction data that were collected at room temperature. Both compounds crystallized in the monoclinic space group C2/c (Z=4). Lattice param...

  7. Placental transfer of plutonium and other actinides

    The report is based on an extensive literature search. All data available from studies on placental transfer of plutonium and other actinides in man and animals have been collected and analysed, and the report presents the significant results as well as unresolved questions and knowledge gaps which may serve as a waypost to future research work. (orig./MG)

  8. Actinide and fission product partitioning and transmutation

    The third international information exchange meeting on actinide and fission product partitioning and transmutation, took place in Cadarache France, on 12-14 December 1994. The proceedings are presented in six sessions : an introduction session, the major programmes and international cooperation, the systems studies, the reactors fuels and targets, the chemistry and a last discussions session. (A.L.B.)

  9. Actinide and fission product partitioning and transmutation

    NONE

    1995-07-01

    The third international information exchange meeting on actinide and fission product partitioning and transmutation, took place in Cadarache France, on 12-14 December 1994. The proceedings are presented in six sessions : an introduction session, the major programmes and international cooperation, the systems studies, the reactors fuels and targets, the chemistry and a last discussions session. (A.L.B.)

  10. Rapid determination of actinides in asphalt samples

    A new rapid method for the determination of actinides in asphalt samples has been developed that can be used in emergency response situations or for routine analysis. If a radiological dispersive device, improvised nuclear device or a nuclear accident such as the accident at the Fukushima Nuclear Power Plant in March, 2011 occurs, there will be an urgent need for rapid analyses of many different environmental matrices, including asphalt materials, to support dose mitigation and environmental clean-up. The new method for the determination of actinides in asphalt utilizes a rapid furnace step to destroy bitumen and organics present in the asphalt and sodium hydroxide fusion to digest the remaining sample. Sample preconcentration steps are used to collect the actinides and a new stacked TRU Resin + DGA Resin column method is employed to separate the actinide isotopes in the asphalt samples. The TRU Resin plus DGA Resin separation approach, which allows sequential separation of plutonium, uranium, americium and curium isotopes in asphalt samples, can be applied to soil samples as well. (author)

  11. Treatment of actinide-containing organic waste

    A method has been developed for reducing the volume of organic wastes and recovering the actinide elements. The waste, together with gaseous oxygen (air) is introduced into a molten salt, preferably an alkali metal carbonate such as sodium carbonate. The bath is kept at 7500 - 10000C and 0.5 - 10 atm to thermally decompose and partially oxidize the waste, while substantially reducing its volume. The gaseous effluent, mainly carbon dioxide and water vapour, is vented to the atmosphere through a series of filters to remove trace amounts of actinide elements or particulate alkali metal salts. The remaining combustion products are entrained in the molten salt. Part of the molten salt-combustion product mixture is withdrawn and mixed with an aqueous medium. Insoluble combustion products are then removed from the aqueous medium and are leached with a mixture of hydrofluoric and nitric acids to solubilize the actinide elements. The actinide elements are easily recovered from the acid solution using conventional techniques. (DN)

  12. Actinide measurements by AMS using fluoride matrices

    Cornett, R. J.; Kazi, Z. H.; Zhao, X.-L.; Chartrand, M. G.; Charles, R. J.; Kieser, W. E.

    2015-10-01

    Actinides can be measured by alpha spectroscopy (AS), mass spectroscopy or accelerator mass spectrometry (AMS). We tested a simple method to separate Pu and Am isotopes from the sample matrix using a single extraction chromatography column. The actinides in the column eluent were then measured by AS or AMS using a fluoride target matrix. Pu and Am were coprecipitated with NdF3. The strongest AMS beams of Pu and Am were produced when there was a large excess of fluoride donor atoms in the target and the NdF3 precipitates were diluted about 6-8 fold with PbF2. The measured concentrations of 239,240Pu and 241Am agreed with the concentrations in standards of known activity and with two IAEA certified reference materials. Measurements of 239,240Pu and 241Am made at A.E. Lalonde AMS Laboratory agree, within their statistical uncertainty, with independent measurements made using the IsoTrace AMS system. This work demonstrated that fluoride targets can produce reliable beams of actinide anions and that the measurement of actinides using fluorides agree with published values in certified reference materials.

  13. Trends in actinide processing at Hanford

    In 1989, the mission at the Hanford Site began a dramatic and sometimes painful transition. The days of production--as we used to know it--are over. Our mission officially has become waste management and environmental cleanup. This mission change didn't eliminate many jobs--in fact, budgets have grown dramatically to support the new mission. Most all of the same skilled crafts, engineers, and scientists are still required for the new mission. This change has not eliminated the need for actinide processing, but it has certainly changed the focus that our actinide chemists and process engineers have. The focus used to be on such things as increasing capacity, improving separations efficiency, and product purity. Minimizing waste had become a more important theme in recent years and it is still a very important concept in the waste management and environmental cleanup arena. However, at Hanford, a new set of words dominates the actinide process scene as we work to deal with actinides that still reside in a variety of forms at the Hanford Site. These words are repackage, stabilize, remove, store and dispose. Some key activities in each of these areas are described in this report

  14. Report of the panel on inhaled actinides

    Some topics discussed are as follows: assessment of risks to man of inhaling actinides; use of estimates for developing protection standards; epidemiology of lung cancer in exposed human populations; development of respiratory tract models; and effects in animals: dose- and effect-modifying factors

  15. Electronic Structure of the Actinide Metals

    Johansson, B.; Skriver, Hans Lomholt

    1982-01-01

    itinerant to localized 5f electron behaviour calculated to take place between plutonium and americium. From experimental data it is shown that the screening of deep core-holes is due to 5f electrons for the lighter actinide elements and 6d electrons for the heavier elements. A simplified model for the full...

  16. ENDF/B-5 Actinides (Rev. 86)

    This document summarizes the contents of the Actinides part of the ENDF/B-5 nuclear data library released by the US National Nuclear Data Center. This library or selective retrievals of it, are available costfree from the IAEA Nuclear Data Section upon request. The present version of the library is the Revision of 1986. (author). Refs, figs and tabs

  17. Optical spectroscopy of f-element compounds

    It is noted that the energies and intensities of transitions observed in the optical spectra of lanthanide (Ln) and actinide (An) compounds can typically be measured with a high degree of accuracy. The observed transitions can then be directly represented as upper state energy levels where the structure is induced by the environment. A discussion is presented of the systematic theoretical interpretation of these transitions both in terms of energy level structure and transition probability. Particularly for the trivalent lanthanides and actinides, the detail to which the interpretation can be carried is unique in the periodic table. The electronic structure of organometallic lanthanides and actinides is emphasized in the discussion. It is made clear that this type of ligand does not present any unique interpretive problems. The basic framework of the interpretation is not dependent upon the specific ionic environment. On the other hand, organometallic compounds represent a particularly interesting group in which to study excited state relaxation

  18. Library of Recommended Actinide Decay Data, 2011

    A major objective of the nuclear data programme within the IAEA is to devise and promote improvements in the quality of nuclear data used in science and technology. Work of this nature was performed by participants in an IAEA coordinated research project (CRP) formulated in 2005 to produce an updated decay data library of important actinides recommended for adoption in various nuclear applications. The specific objectives of this project were to improve the accuracy of heavy element and actinide decay data in order to: determine more accurately the effects of these recommended data on fission reactor fuel cycles; aid in improved assessments of nuclear waste management procedures; provide more reliable decay data for nuclear safeguards; assess with greater confidence the environmental impact of specific actinides and other heavy element radionuclides generated through their decay chains; and extend the scientific knowledge of actinide decay characteristics for nuclear physics research and non-energy applications. Some CRP participants were able to perform a number of highly precise measurements, based on the availability of suitable source materials, and systematic in depth evaluations of the requested decay data. These requested data consisted primarily of half-lives, and α, β-, EC/β+, Auger electron, conversion electron, X ray and γ ray energies and emission probabilities, all with uncertainties expressed at the 1σ confidence level. The IAEA established a CRP entitled Updated Decay Data Library for Actinides in mid-2005. During the course of discussions at the coordinated research meetings, the participants agreed to undertake work programmes of measurements and evaluations, to be completed by the end of 2010. The results of the evaluation studies undertaken by the CRP are presented in Annex I. Annexes II-V include descriptions of the sources of the evaluated decay data and each individual evaluation process in detail, as well as data files in the Evaluated

  19. Solid-state actinide acid phosphites from phosphorous acid melts

    Oh, George N. [Department of Civil and Environmental Engineering and Earth Sciences, University of Notre Dame, 156 Fitzpatrick Hall, Notre Dame, IN 46556 (United States); Burns, Peter C., E-mail: pburns@nd.edu [Department of Civil and Environmental Engineering and Earth Sciences, University of Notre Dame, 156 Fitzpatrick Hall, Notre Dame, IN 46556 (United States); Department of Chemistry and Biochemistry, University of Notre Dame, Notre Dame, IN 46556 (United States)

    2014-07-01

    The reaction of UO{sub 3} and H{sub 3}PO{sub 3} at 100 °C and subsequent reaction with dimethylformamide (DMF) produces crystals of the compound (NH{sub 2}(CH{sub 3}){sub 2})[UO{sub 2}(HPO{sub 2}OH)(HPO{sub 3})]. This compound crystallizes in space group P2{sub 1}/n and consists of layers of uranyl pentagonal bipyramids that share equatorial vertices with phosphite units, separated by dimethylammonium. In contrast, the reaction of phosphorous acid and actinide oxides at 210 °C produces a viscous syrup. Subsequent dilution in solvents and use of standard solution-state methods results in the crystallization of two polymorphs of the actinide acid phosphites An(HPO{sub 2}OH){sub 4} (An=U, Th) and of the mixed acid phosphite–phosphite U(HPO{sub 3})(HPO{sub 2}OH){sub 2}(H{sub 2}O)·2(H{sub 2}O). α- and β-An(HPO{sub 2}OH){sub 4} crystallize in space groups C2/c and P2{sub 1}/n, respectively, and comprise a three-dimensional network of An{sup 4+} cations in square antiprismatic coordination corner-sharing with protonated phosphite units, whereas U(HPO{sub 3})(HPO{sub 2}OH){sub 2}(H{sub 2}O){sub 2}·(H{sub 2}O) crystallizes in a layered structure in space group Pbca that is composed of An{sup 4+} cations in square antiprismatic coordination corner-sharing with protonated phosphites and water ligands. We discuss our findings in using solid inorganic reagents to produce a solution-workable precursor from which solid-state compounds can be crystallized. - Graphical abstract: Reaction of UO{sub 3} and H{sub 3}PO{sub 3} at 100 °C and subsequent reaction with DMF produces crystals of (NH{sub 2}(CH{sub 3}){sub 2})[UO{sub 2}(HPO{sub 2}OH)(HPO{sub 3})] with a layered structure. Reaction of phosphorous acid and actinide oxides at 210 °C produces a viscous syrup and further solution-state reactions result in the crystallization of the actinide acid phosphites An(HPO{sub 2}OH){sub 4} (An=U, Th), with a three-dimensional network structure, and the mixed acid phosphite

  20. Criticality analysis of aggregations of actinides from commerical nuclear waste in geological storage

    An underground nuclear-waste terminal-storage facility for either spent fuel elements or high level waste from a reprocessing plant will contain large amounts of fissionable actinides. Such a facility must be designed to preclude the concentration of these isotopes into a critical mass. Information on the critical masses of the various isotopes present in spent fuel or high level waste is required as part of such a design effort. This study provides this information. The results of this study will be used, in conjunction with geologic transport rates of the actinide compounds, to estimate mass formation probabilities in waste repositories. A computational model was developed as part of the study to perform criticality calculations rapidly and efficiently and to produce tables and plots of actinide concentration in geologic material versus critical mass. The criticality model uses a discrete ordinates approximation to neutron transport theory and treats six energy groups and spherical geometry. Neutron cross sections were obtained from ENDF/B-IV or ENDF/B-V cross section libraries. Critical masses calculated with the computational model were checked against experimental values and against more detailed calculational values and were found to be from 30 percent less to 10 percent greater. Critical mass calculations were made for five waste types, five waste ages, five actinide elements, and four geologic compositions. Minimum critical masses were calculated for over 400 combinations of the above variables. The relative importance for criticality of the various actinides and waste types is presented in terms of the number of possible critical masses per waste container

  1. Adventures in Actinide Chemistry: A Year of Exploring Uranium and Thorium in Los Alamos

    The first part of this collection of slides is concerned with considerations when working with actinides. The topics discussed in the document as a whole are the following: Actinide chemistry vs. transition metal chemistry--tools we can use; New synthetic methods to obtain actinide hydrides; Actinide metallacycles: synthesis, structure, and properties; and Reactivity of actinide metallacycles.

  2. Adventures in Actinide Chemistry: A Year of Exploring Uranium and Thorium in Los Alamos

    Pagano, Justin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-08

    The first part of this collection of slides is concerned with considerations when working with actinides. The topics discussed in the document as a whole are the following: Actinide chemistry vs. transition metal chemistry--tools we can use; New synthetic methods to obtain actinide hydrides; Actinide metallacycles: synthesis, structure, and properties; and Reactivity of actinide metallacycles.

  3. Actinide halides and their complexes

    Papers are reviewed published since late 1967 to middle 1970. Problems involving the availability of actinoid halogenides with oxidation degrees from +6 to +2, actinoid oxihalogenides, and also halogenous actinoid complexes with oxidation degrees from +6 to +3, oxihalogenous actinoid complexes with valencies from +6 to -6. The NpF+L5, BKF4, CfF4, BKF3, CfF3 BKBr3, PaF5.2H2O and Pa2OF8 compounds with rhombic pseudocell with the parameters of a0=6.894A, b0=4.014A, c0=4.143A have been obtained for the first time. The process is described of the hew- synthesised ThOF with the face-centered lattice (a0=5.68A), hydrated U(5)-MU2F12 complexes where M=Co, Mi, Cu, and also MUF7 complexes where M=K1Rb, Cs. Csub(s)UFsub(7) is characterized by cubic symmetry with a0=5.54A. The crystal structure of the formally-divalent actinoid compound, ThI2, has been examined. In fact, this compound should be regarded as Th4+(e-)2I2. An interesting method for obtaining UOCl3 through a reaction between UO3 and MoCl5; UOF2.H2O from aqueous solution, and also a simple method for obtaining UCl5 by UO3 reduction with the silicon tetrachloride. The results of investigation of infrared spectra of halogenous and oxihalogenous actinoid complexes (valency from +6 to +4) with donor ligands

  4. Advanced Extraction Methods for Actinide/Lanthanide Separations

    The separation of An(III) ions from chemically similar Ln(III) ions is perhaps one of the most difficult problems encountered during the processing of nuclear waste. In the 3+ oxidation states, the metal ions have an identical charge and roughly the same ionic radius. They differ strictly in the relative energies of their f- and d-orbitals, and to separate these metal ions, ligands will need to be developed that take advantage of this small but important distinction. The extraction of uranium and plutonium from nitric acid solution can be performed quantitatively by the extraction with the TBP (tributyl phosphate). Commercially, this process has found wide use in the PUREX (plutonium uranium extraction) reprocessing method. The TRUEX (transuranium extraction) process is further used to coextract the trivalent lanthanides and actinides ions from HLLW generated during PUREX extraction. This method uses CMPO [(N, N-diisobutylcarbamoylmethyl) octylphenylphosphineoxide] intermixed with TBP as a synergistic agent. However, the final separation of trivalent actinides from trivalent lanthanides still remains a challenging task. In TRUEX nitric acid solution, the Am(III) ion is coordinated by three CMPO molecules and three nitrate anions. Taking inspiration from this data and previous work with calix[4]arene systems, researchers on this project have developed a C3-symmetric tris-CMPO ligand system using a triphenoxymethane platform as a base. The triphenoxymethane ligand systems have many advantages for the preparation of complex ligand systems. The compounds are very easy to prepare. The steric and solubility properties can be tuned through an extreme range by the inclusion of different alkoxy and alkyl groups such as methyoxy, ethoxy, t-butoxy, methyl, octyl, t-pentyl, or even t-pentyl at the ortho- and para-positions of the aryl rings. The triphenoxymethane ligand system shows promise as an improved extractant for both tetravalent and trivalent actinide recoveries form

  5. Advanced Extraction Methods for Actinide/Lanthanide Separations

    Scott, M.J.

    2005-12-01

    The separation of An(III) ions from chemically similar Ln(III) ions is perhaps one of the most difficult problems encountered during the processing of nuclear waste. In the 3+ oxidation states, the metal ions have an identical charge and roughly the same ionic radius. They differ strictly in the relative energies of their f- and d-orbitals, and to separate these metal ions, ligands will need to be developed that take advantage of this small but important distinction. The extraction of uranium and plutonium from nitric acid solution can be performed quantitatively by the extraction with the TBP (tributyl phosphate). Commercially, this process has found wide use in the PUREX (plutonium uranium extraction) reprocessing method. The TRUEX (transuranium extraction) process is further used to coextract the trivalent lanthanides and actinides ions from HLLW generated during PUREX extraction. This method uses CMPO [(N, N-diisobutylcarbamoylmethyl) octylphenylphosphineoxide] intermixed with TBP as a synergistic agent. However, the final separation of trivalent actinides from trivalent lanthanides still remains a challenging task. In TRUEX nitric acid solution, the Am(III) ion is coordinated by three CMPO molecules and three nitrate anions. Taking inspiration from this data and previous work with calix[4]arene systems, researchers on this project have developed a C3-symmetric tris-CMPO ligand system using a triphenoxymethane platform as a base. The triphenoxymethane ligand systems have many advantages for the preparation of complex ligand systems. The compounds are very easy to prepare. The steric and solubility properties can be tuned through an extreme range by the inclusion of different alkoxy and alkyl groups such as methyoxy, ethoxy, t-butoxy, methyl, octyl, t-pentyl, or even t-pentyl at the ortho- and para-positions of the aryl rings. The triphenoxymethane ligand system shows promise as an improved extractant for both tetravalent and trivalent actinide recoveries form

  6. Research and development for the fabrication of minor actinide-bearing fuel materials and technologies

    The transmutation of minor actinides (MA) in 4th-generation reactors can be envisioned in homogeneous or heterogeneous mode. Minor actinide-bearing blankets (MABB) -- fuel for heterogeneous transmutation comprising 10 to 20% MA dispersed in a UO2 matrix -- are largely unknown and warrant further research on the fabrication and properties of the materials, on their evolution under self-irradiation, and on their behavior in the reactor. This article summarizes progress in co conversion of uranium-americium compounds by oxalate precipitation or ion exchange resins. It also describes current R&D on MABB fabrication by powder metallurgy or spherical particle metallurgy. The fabrication processes in teleoperated shielded cells are discussed together with the technologies applicable to MABB fabrication equipment. (author)

  7. Minor actinide transmutation on PWR burnable poison rods

    Highlights: • Key issues associated with MA transmutation are the appropriate loading pattern. • Commercial PWRs are the only choice to transmute MAs in large scale currently. • Considerable amount of MA can be loaded to PWR without disturbing keff markedly. • Loading MA to PWR burnable poison rods for transmutation is an optimal loading pattern. - Abstract: Minor actinides are the primary contributors to long term radiotoxicity in spent fuel. The majority of commercial reactors in operation in the world are PWRs, so to study the minor actinide transmutation characteristics in the PWRs and ultimately realize the successful minor actinide transmutation in PWRs are crucial problem in the area of the nuclear waste disposal. The key issues associated with the minor actinide transmutation are the appropriate loading patterns when introducing minor actinides to the PWR core. We study two different minor actinide transmutation materials loading patterns on the PWR burnable poison rods, one is to coat a thin layer of minor actinide in the water gap between the zircaloy cladding and the stainless steel which is filled with water, another one is that minor actinides substitute for burnable poison directly within burnable poison rods. Simulation calculation indicates that the two loading patterns can load approximately equivalent to 5–6 PWR annual minor actinide yields without disturbing the PWR keff markedly. The PWR keff can return criticality again by slightly reducing the boric acid concentration in the coolant of PWR or removing some burnable poison rods without coating the minor actinide transmutation materials from PWR core. In other words, loading minor actinide transmutation material to PWR does not consume extra neutron, minor actinide just consumes the neutrons which absorbed by the removed control poisons. Both minor actinide loading patterns are technically feasible; most importantly do not need to modify the configuration of the PWR core and

  8. Measurements of minor actinides cross sections for transmutation

    The existing reactors produce two kinds of nuclear waste: the fission products and heavy nuclei beyond uranium called minor actinides (Americium and Curium isotopes). Two options are considered: storage in deep geological site and/or transmutation by fast neutron induced fission. These studies involve many neutron data. Unfortunately, these data bases have still many shortcomings to achieve reliable results. The aim of these measurements is to update nuclear data and complement them. We have measured the fission cross section of 243Am (7370 y) in reference to the (n,p) elastic scattering to provide new data in a range of fast neutrons (1-8 MeV). A statistical model has been developed to describe the reaction 243Am (n,f). Moreover, the cross sections from the following reactions have been be extracted from these calculations: inelastic scattering 243Am (n,n') and radiative capture 243Am (n,γ) cross sections. The direct measurements of neutron cross sections are often a challenge considering the short half-lives of minor actinides. To overcome this problem, a surrogate method using transfer reactions has been used to study few isotopes of curium. The reactions 243Am (3He, d)244Cm, 243Am (3He, t)243Cm and 243Am (3He, α)242Am allowed to measure the fission probabilities of 243,244Cm and 242Am. The fission cross sections of 242,243Cm (162,9 d, 28,5 y) and 241Am (431 y) have been obtained by multiplying these fission probabilities by the calculated compound nuclear neutron cross section relative to each channel. For each measurement, an accurate assessment of the errors was realized through variance-covariance studies. For measurements of the reaction 243Am(n,f), the analysis of error correlations allowed to interpret the scope of these measures within the existing measurements. (author)

  9. Sigma Team for Advanced Actinide Recycle FY2015 Accomplishments and Directions

    Moyer, Bruce A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-30

    The Sigma Team for Minor Actinide Recycle (STAAR) has made notable progress in FY 2015 toward the overarching goal to develop more efficient separation methods for actinides in support of the United States Department of Energy (USDOE) objective of sustainable fuel cycles. Research in STAAR has been emphasizing the separation of americium and other minor actinides (MAs) to enable closed nuclear fuel recycle options mainly within the paradigm of aqueous reprocessing of used oxide nuclear fuel dissolved in nitric acid. Its major scientific challenge concerns achieving selectivity for trivalent actinides vs lanthanides. Not only is this challenge yielding to research advances, but technology concepts such as ALSEP (Actinide Lanthanide Separation) are maturing toward demonstration readiness. Efforts are organized in five task areas: 1) combining bifunctional neutral extractants with an acidic extractant to form a single process solvent, developing a process flowsheet, and demonstrating it at bench scale; 2) oxidation of Am(III) to Am(VI) and subsequent separation with other multivalent actinides; 3) developing an effective soft-donor solvent system for An(III) selective extraction using mixed N,O-donor or all-N donor extractants such as triazinyl pyridine compounds; 4) testing of inorganic and hybrid-type ion exchange materials for MA separations; and 5) computer-aided molecular design to identify altogether new extractants and complexants and theory-based experimental data interpretation. Within these tasks, two strategies are employed, one involving oxidation of americium to its pentavalent or hexavalent state and one that seeks to selectively complex trivalent americium either in the aqueous phase or the solvent phase. Solvent extraction represents the primary separation method employed, though ion exchange and crystallization play an important role. Highlights of accomplishments include: Confirmation of the first-ever electrolytic oxidation of Am(III) in a

  10. Method to determine actinide pollution in water

    This patent describes a process for measuring small amounts, of actinide pollution in fluidic samples by use of solid state track recording devices. It comprises: containing a sample to be tested, containing small amounts of less than 3E-12 Curies per cubic centimeter of actinide pollution, in a sample cell defining an internal chamber and having means for ingress and egress and means for establishing a fluidic sample therein, the sample cell being substantially transparent to thermal neutron radiation and the internal chamber defined therein being configured to constitute a fluidic sample therein as an asymptotic fluid fission source; positioning a solid state track recorder within the internal chamber defined by the sample cell, so that the solid state track recorder has a radiation viewing window through an asymptotic thickness of a fluidic sample contained in the sample cell; capturing at least an asymptotic amount of fluidic sample in the sample cell

  11. Microbial Transformations of Actinides and Other Radionuclides

    Francis,A.J.; Dodge, C. J.

    2009-01-07

    Microorganisms can affect the stability and mobility of the actinides and other radionuclides released from nuclear fuel cycle and from nuclear fuel reprocessing plants. Under appropriate conditions, microorganisms can alter the chemical speciation, solubility and sorption properties and thus could increase or decrease the concentrations of radionuclides in solution in the environment and the bioavailability. Dissolution or immobilization of radionuclides is brought about by direct enzymatic action or indirect non-enzymatic action of microorganisms. Although the physical, chemical, and geochemical processes affecting dissolution, precipitation, and mobilization of radionuclides have been extensively investigated, we have only limited information on the effects of microbial processes and biochemical mechanisms which affect the stability and mobility of radionuclides. The mechanisms of microbial transformations of the major and minor actinides U, Pu, Cm, Am, Np, the fission products and other radionuclides such as Ra, Tc, I, Cs, Sr, under aerobic and anaerobic conditions in the presence of electron donors and acceptors are reviewed.

  12. Actinide and fission product separation and transmutation

    NONE

    1991-07-01

    The first international information exchange meeting on actinide and fission product separation and transmutation, took place in Mito in Japan, on 6-8 November 1990. It starts with a number of general overview papers to give us some broad perspectives. Following that it takes a look at some basic facts about physics and about the quantities of materials it is talking about. Then it proceeds to some specific aspects of partitioning, starting with evolution from today commercially applied processes and going on to other possibilities. At the end of the third session it takes a look at the significance of partitioning and transmutation of actinides before it embarks on two sessions on transmutation, first in reactors and second in accelerators. The last session is designed to throw back into the discussion the main points which need to be looked at when considering future work in this area. (A.L.B.)

  13. Interaction of actinide cations with synthetic polyelectrolytes

    The binding of Am+3, Th+4 and UO2+2 to polymaleic acid, polyethylenemaleic acid and polymethylvinylethermaleic acid has been measured by a solvent extraction technique at 250C and either 0.02 or 0.10 M ionic strength. The solutions were buffered over a pH range such that the percent of carboxylate groups ionized ranged from 25 to 74%. The binding was described by two constants, β1 and β2, which were evaluated after correction for complexation of the actinide cations by acetate and hydrolysis. For comparable degrees of ionization, all three polyelectrolytes showed similar binding strengths. In general, these results indicated that the binding of actinides to these synthetic polyelectrolytes is basically similar to that of natural polyelectrolytes such as humic and fulvic acids. (orig.)

  14. Actinide and fission product separation and transmutation

    The first international information exchange meeting on actinide and fission product separation and transmutation, took place in Mito in Japan, on 6-8 November 1990. It starts with a number of general overview papers to give us some broad perspectives. Following that it takes a look at some basic facts about physics and about the quantities of materials it is talking about. Then it proceeds to some specific aspects of partitioning, starting with evolution from today commercially applied processes and going on to other possibilities. At the end of the third session it takes a look at the significance of partitioning and transmutation of actinides before it embarks on two sessions on transmutation, first in reactors and second in accelerators. The last session is designed to throw back into the discussion the main points which need to be looked at when considering future work in this area. (A.L.B.)

  15. Actinide co-ordination and discrimination by human transferrin

    The design and evaluation of synthetic chelating agents which are specific for the actinide(IV) ions are described. The initial approach has been based on the biological and chemical similarities of Pu(IV) and Fe(III). In particular, using a philosophy influenced by naturally occurring ferric ion chelating agents, tetracatechoylamide ligands have been developed for the actinides. The test of the degree to which there was an actinide-specific complexing agent has been based on studies using Pu4+ as a biological contaminant. For a chelating agent to be able to sequester actinides effectively, it must remove actinides from actinide(IV)-protein complexes. The complexation chemistry of Th(IV)-transferrin system is described. The evidence suggests that, based on a size criterion, Th(IV) may be a poor biological model for Pu(IV) in some cases, with U(IV) being a somewhat better model. (author)

  16. Actinide Source Term Program, position paper. Revision 1

    The Actinide Source Term represents the quantity of actinides that could be mobilized within WIPP brines and could migrate with the brines away from the disposal room vicinity. This document presents the various proposed methods for estimating this source term, with a particular focus on defining these methods and evaluating the defensibility of the models for mobile actinide concentrations. The conclusions reached in this document are: the 92 PA open-quotes expert panelclose quotes model for mobile actinide concentrations is not defensible; and, although it is extremely conservative, the open-quotes inventory limitsclose quotes model is the only existing defensible model for the actinide source term. The model effort in progress, open-quotes chemical modeling of mobile actinide concentrationsclose quotes, supported by a laboratory effort that is also in progress, is designed to provide a reasonable description of the system and be scientifically realistic and supplant the open-quotes Inventory limitsclose quotes model

  17. Actinides reduction by recycling in a thermal reactor

    This work is directed towards the evaluation of an advanced nuclear fuel cycle in which radioactive actinides could be recycled to remove most of the radioactive material; firstly a production reference of actinides in standard nuclear fuel of uranium at the end of its burning in a BWR reactor is established, after a fuel containing plutonium is modeled to also calculate the actinides production in MOX fuel type. Also it proposes a design of fuel rod containing 6% of actinides in a matrix of uranium from the tails of enrichment, then four standard uranium fuel rods are replaced by actinides rods to evaluate the production and transmutation thereof, the same procedure was performed in the fuel type MOX and the end actinide reduction in the fuel was evaluated. (Author)

  18. Thermal properties of minor actinide targets

    Staicu, Dragos; Somers, Joseph; FERNANDEZ CARRETERO Asuncion; KONINGS Rudy

    2014-01-01

    The thermal properties of minor actinides targets for the management of high level and long lived radioactive waste are investigated. The microstructure, thermal diffusivity and specific heat of (Pu,Am)O2, (Zr,Pu,Am)O2, (Zr,Y,Am)O2, (Zr,Y,Pu,Am)O2 and CERMETS with Mo matrix are characterised in order to assess the safety limits of these materials.

  19. The electrochemical properties of actinide amalgams

    Standard potentials are selected for actinides (An) and their amalgams. From the obtained results, energy characteristics are calculated and analyzed for alloy formation in An-Hg systems. It is found that solutions of the f-elements in mercury are very close in properties to amalgams of the alkali and alkaline-earth metals, except that, for the active Group III metals, the ion skeletons have a greater number of realizable charged states in the condensed phase

  20. Actinide and fission product partitioning and transmutation

    NONE

    1997-07-01

    The fourth international information exchange meeting on actinide and fission product partitioning and transmutation, took place in Mito City in Japan, on 111-13 September 1996. The proceedings are presented in six sessions: the major programmes and international cooperation, the partitioning and transmutation programs, feasibility studies, particular separation processes, the accelerator driven transmutation, and the chemistry of the fuel cycle. (A.L.B.)

  1. The actinide waste problem in perspective

    The long lived alpha emitting actinide waste nuclides of transplutonium elements such as Np, Am, Cm etc (also called Byproduct Actinides or BPA for short) which are proposed to be disposed of as part of High Active Waste (HAW) in deep underground geological repositories has been a persistent source of concern to opponents and critics of nuclear fission energy. In this context the recent finding of the authors that each and every transuranium nuclide, without exception, can independently support a self sustaining chain reaction raises the important philosophical question: Is it justified to continue to refer to these nuclides as nuclear waste ? Our computations have revealed that the Ksub(eff) of an assembly of each of these nuclides increases linearly with the fissility parameter (Z2/A), its threshold value for Ksub(eff) to exceed unity being 34.1 for fissile (odd neutron) nuclides and 34.9 for fissible (even neutron) nuclides. In other words higher the (Z2/A) better is its performance as a fission reactor fuel. This finding suggests that the long lived actinide waste problem can be solved by separating all the actinide nuclides from the High Active Waste stream and recycling them back into any hard spectrum fission reactor. The studies strongly support the concept of partitioning-transmutation (p-t) revived with great enthusiasm in Japan under the banner of the OMEGA proposal. However it is found that there is no need to resort to any exotic devices such as proton accelerators or fusion reactor blankets for nuclear incineration. In the context of the 232Th/233U fuel cycle it is worth noting that the quantum of transuranium nuclides generated per se is smaller by several orders of magnitude as compared to that arising from 235U/238U bearing fuels. Thus on the whole it appears that in the thorium fuel cycle partitioning and recycle of byproduct nuclides would be a less cumbersome undertaking. (author). 26 refs., 6 figs., 3 tabs

  2. Actinide and fission product partitioning and transmutation

    The fourth international information exchange meeting on actinide and fission product partitioning and transmutation, took place in Mito City in Japan, on 111-13 September 1996. The proceedings are presented in six sessions: the major programmes and international cooperation, the partitioning and transmutation programs, feasibility studies, particular separation processes, the accelerator driven transmutation, and the chemistry of the fuel cycle. (A.L.B.)

  3. Thermodynamics and biogeochemistry of lanthanides and actinides

    Periodicity of changes in specific values of heat capacity and entropy of chemical elements, lanthanides, actinides, separating or transition elements, first of all, depending on their ordinal number, was considered. It is shown that entropy minima separate the chemical elements into light-weight and more heavy ones. The universal separation is fundamental, as it dictates the difference of the chemical elements not only in terms of thermodynamic, but also metallogenic, biogeochemical and physical properties, as well

  4. Strength of Coriolis alignment in actinide nuclei

    Analysis of aligned angular momenta i/sub α/(ω) in different rotational bands extracted from experimental data with a linear spin term approx.BI in the formulas for E/sub rot/(I) reveal that, in actinide nuclei in the levels with modest spin I< or =23, i/sub α/(ω) usually is very small (< or approx. =0.7), i.e., is much smaller than in rare earth nuclei

  5. Analysis of optical properties of actinide dioxides

    Ionic calculations, symmetry considerations, and detailed analysis of reflectivity experiments have been used to identify general features of the band structure of actinide dioxides with a fluorite lattice. The ionic calculations adjust atomic energy levels by the electrostatic energies arising from long range electric fields of the ionic lattice; the labelling of high lying energy bands is determined by symmetry; experimental analysis includes the use of appropriate sum rules. A combination of these considerations enable a tentative band scheme to be constructed. It is suggested that there are filled valence bands (GAMMA15,GAMMA'25) originating in oxygen 2p-states and empty conduction bands (GAMMA1,GAMMA12,GAMMA'25) originating in actinide 7s and 6d states. The mean band gap (Penn gap) is of the order of 14 eV. The actinide f-electron states, which lie approximately 5 eV below the conduction bands, are taken to be localized - at least in UO2. (author)

  6. Actinide behavior in a freshwater pond

    Long-term investigations of solution chemistry in an alkaline freshwater pond have revealed that actinide oxidation state behavior, particularly that of plutonium, is complex. The Pu(V,VI) fraction was predominant in solution, but it varied over the entire range reported from other natural aquatic environments, in this case, as a result of intrinsic biological and chemical cycles (redox and pH-dependent phenomena). A strong positive correlation between plutonium (Pu), but not uranium (U), and hydroxyl ion over the observation period, especially when both were known to be in higher oxidation states, was particularly notable. Coupled with other examples of divergent U and Pu behavior, this result suggests that Pu(V), or perhaps a mixture of Pu(V,VI), was the prevalent oxidation state in solution. Observations of trivalent actinide sorption behavior during an algal bloom, coupled with the association with a high-molecular weight (nominally 6000 to 10,000 mol wt) organic fraction in solution, indicate that solution-detritus cycling of organic carbon, in turn, may be the primary mechanism in amercium-curium (Am-Cm) cycling. Sorption by sedimentary materials appears to predominate over other factors controlling effective actinide solubility and may explain, at least partially, the absence of an expected strong positive correlation between carbonate and dissolved U. 49 references, 6 figures, 12 tables

  7. Nuclear data for plutonium and minor actinides

    Some experience in the usage of different evaluations of neutron constants for plutonium isotopes and minor actinides (MA) is described. That experience was obtained under designing the ABBN-93 group data set which nowadays is used widely for neutronics calculations of different cores with different spectrum and shielding. Under testing of the ABBN-93 data set through different integral and macroscopic experiments the main attention was paid to fuel nuclides and cross sections for MA practically did not verify. That gave an opportunity to change MA nuclear data for more modern without verification of the hole system. This desire appeared with new data libraries JENDL-3.2, JEF-2.2 and ENDF/B-6.2, which was not accessible under designing the ABBN-93. At the same time with the reevaluation of the basic MA nuclear data the ABBN-93 and the library FOND-2 of evaluated nuclear data files, which used as the basis for retrieving of the ABBN-93 data, were added with not very important MA data. So the FOND-2 library nowadays contents nuclear data files for all actinides with the half-life time more 1 day and also those MA which produce long-life actinides

  8. BWR Assembly Optimization for Minor Actinide Recycling

    The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs). A top-level objective of the Advanced Fuel Cycle Systems Analysis program element of the DOE NERI program is to investigate spent fuel treatment and recycling options for current light water reactors (LWRs). Accordingly, this project targets to expand the traditional scope of nuclear fuel management optimization into the following two complementary specific objectives: (1) To develop a direct coupling between the pin-by-pin within-bundle loading control variables and core-wide (bundle-by-bundle) optimization objectives, (2) to extend the methodology developed to explicitly encompass control variables, objectives, and constraints designed to maximize minor actinide incineration in BWR bundles and cycles. The first specific objective is projected to 'uncover' dormant thermal margin made available by employing additional degrees of freedom within the optimization process, while the addition of minor actinides is expected to 'consume' some of the uncovered thermal margin. Therefore, a key underlying goal of this project is to effectively invest some of the uncovered thermal margin into achieving the primary objective.

  9. Synthesis and characterization of novel lanthanide- and actinide-containing titanates and zircono-titanates; relevance to nuclear waste disposal

    Before experiments using actinide elements are performed, synthetic routes are tested using lanthanides of comparable ionic radii as surrogates. Compound and solid solution formation in several lanthanide-containing titanate and zircono-titanate systems have been established using X-ray diffraction (XRD) analysis, which helped to define interesting and novel experiments, some of which have been performed and are discussed, for selected actinide elements. The aqueous solubilities of several lanthanide- and actinide-containing compounds, representative of the systems studied, were tested in several leachants, including the WIPP open-quotes Aclose quotes brine, following modified Materials Characterization Center procedures (MCC-3). The WIPP open-quotes Aclose quotes brine is a synthetic substitute for that found in nature at the Waste Isolation Pilot Plant (WIPP) in New Mexico. The concentrations of cerium, used as a surrogate for plutonium, leached by the WIPP open-quotes Aclose quotes brine from all the cerium-containing compounds and solid solutions tested were below the Inductively Coupled Plasma (ICP) atomic emission spectrometry limit of detection (10 ppm) established for cerium in this brine. The concentrations of plutonium leached from the two plutonium-containing solid solutions were less than 1 ppm as determined by gross alpha counting and alpha pulse height analysis. Concentrations of strontium leached by the WIPP brine from stable strontium containing titanate compounds, studied as possible immobilizers of both 90Sr and actinide elements, were also quite low. These compound and solid solution formation investigations and the aqueous solubility studies suggest that the types of titanate and zircono-titanate compounds and solid solutions studied in this work appear to be useful as host matrices for nuclear waste immobilization

  10. Ground-state electronic structure of actinide monocarbides and mononitrides

    Petit, Leon; Svane, Axel; Szotek, Z.;

    2009-01-01

    The self-interaction corrected local spin-density approximation is used to investigate the ground-state valency configuration of the actinide ions in the actinide monocarbides, AC (A=U,Np,Pu,Am,Cm), and the actinide mononitrides, AN. The electronic structure is characterized by a gradually...... the localization transition. The calculated valence electron densities of states are in good agreement with photoemission data....

  11. Successive change regularity of actinide properties with atomic number

    The development and achievements on chemistry of actinide elements are summarised. The relations of properties of actinides to their electronic configurations of valence electronic shells are discussed. Some anomalies of solid properties, the radius contraction, the stable state effect of f7n-orbits (n = 0, 1, 2) and the tetrad effect of oxidation states, etc., with atomic number (Z) are described. 31 figures appended show directly the successive change regularity of actinide properties with Z

  12. Study on remain actinides recovery in pyro reprocessing

    The spent fuel reprocessing by dry process called pyro reprocessing have been studied. Most of U, Pu and MA (minor actinides) from the spent fuel will be recovered and be fed back to the reactor as new fuel. Accumulation of remain actinides will be separated by extraction process with liquid cadmium solvent. The research was conducted by computer simulation to calculate the stage number required. The calculation's results showed on the 20 stages extractor more than 99% actinides can be separated. (author)

  13. Bidentate organophosphorus solvent extraction process for actinide recovery and partition

    Schulz, Wallace W.

    1976-01-01

    A liquid-liquid extraction process for the recovery and partitioning of actinide values from acidic nuclear waste aqueous solutions, the actinide values including trivalent, tetravalent and hexavalent oxidation states is provided and includes the steps of contacting the aqueous solution with a bidentate organophosphorous extractant to extract essentially all of the actinide values into the organic phase. Thereafter the respective actinide fractions are selectively partitioned into separate aqueous solutions by contact with dilute nitric or nitric-hydrofluoric acid solutions. The hexavalent uranium is finally removed from the organic phase by contact with a dilute sodium carbonate solution.

  14. Advanced Aqueous Separation Systems for Actinide Partitioning

    Nash, Ken [Washington State Univ., Pullman, WA (United States); Martin, Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lumetta, Gregg [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-02

    One of the most challenging aspects of advanced processing of used nuclear fuel is the separation of transplutonium actinides from fission product lanthanides. This separation is essential if actinide transmutation options are to be pursued in advanced fuel cycles, as lanthanides compete with actinides for neutrons in both thermal and fast reactors, thus limiting efficiency. The separation is difficult because the chemistry of Am3+ and Cm3+ is nearly identical to that of the trivalent lanthanides (Ln3+). The prior literature teaches that two approaches offer the greatest probability of devising a successful group separation process based on aqueous processes: 1) the application of complexing agents containing ligand donor atoms that are softer than oxygen (N, S, Cl-) or 2) changing the oxidation state of Am to the IV, V, or VI state to increase the essential differences between Am and lanthanide chemistry (an approach utilized in the PUREX process to selectively remove Pu4+ and UO22+ from fission products). The latter approach offers the additional benefit of enabling a separation of Am from Cm, as Cm(III) is resistant to oxidation and so can easily be made to follow the lanthanides. The fundamental limitations of these approaches are that 1) the soft(er) donor atoms that interact more strongly with actinide cations than lanthanides form substantially weaker bonds than oxygen atoms, thus necessitating modification of extraction conditions for adequate phase transfer efficiency, 2) soft donor reagents have been seen to suffer slow phase transfer kinetics and hydro-/radiolytic stability limitations and 3) the upper oxidation states of Am are all moderately strong oxidants, hence of only transient stability in media representative of conventional aqueous separations systems. There are examples in the literature of both approaches having been described. However, it is not clear at present that any extant process is sufficiently robust for application at the scale

  15. The electronic g matrix of some actinide complexes

    Complete text of publication follows: The molecular g-factors are crucial parameters in Electron Paramagnetic Resonance (EPR) spectroscopy. They parametrize the Zeeman effect that involves the interaction of a spin magnetic moment with a magnetic field. Before the 90's, g-factors were mostly calculated by semi-empirical methods while in the last decade, ab initio techniques have been developed based on wave functions or density functional theories either using a sum over states (SOS) expansion or using response theory [1]. We have recently proposed an alternative method based on wave function theory including spin-orbit effects by the SO-RASSI method [2]. This method has been applied with success to small molecules containing atoms until the third series of the transition metals and to a mixed-valence bimetallic complex[3] and in this work, it is applied to actinide complexes with a 5f1 configuration. To our knowledge, only few attempts have been made to calculate g-factors of actinide complexes from first principles [4, 5]. Relativistic effects in actinide complexes are important, so the deviation of g-factors from the value of the free electron is large and can even become negative. Most of the experiments measuring magnetic properties of actinide complexes date from the sixties. EPR and magnetic susceptibilities give the absolute values of the g-factors while experiment using circularly polarized light provide the sign of the product of the three factors. Magnetic properties of these compounds are easily understood using ligand field theory models. In the first part of this presentation, we will discuss the arbitrary character of the g-matrix and specially of the effect of phase factors and of the choice of the spin quantification axis and we will show that only the G tensor gg* has a physical significance. In the second part, equilibrium distances, excitation energies and g-factors of the AnXq-6 series with An = Pa,U,Np and X = F,Cl,Br are calculated using the

  16. Programme and Abstracts. 38. Journees des Actinides together with the 7. School on the Physics and Chemistry of the Actinides

    Journees des Actinides (JdA) is a traditional informal actinide forum, including physics, chemistry, and materials research. It regularly brings together experts from fields involved, taking place in a very informal way, emphasizing exchanges and discussions on current issues in actinide science. At the 38th JdA (10-15 April 2008; Wroclaw, Poland) scientific communications on the following topics on physics and chemistry of the actinides were presented: (a) inorganic and organometallic chemistry; (b) strongly correlated behaviour, superconductivity, quantum criticality; (c) materials science; (d) theory, electronic structure; (e) nuclear fuel cycle, environment

  17. Synergistic extraction of actinides : Part I. Hexa-and pentavalent actinides

    A detailed discussion on the reported literature on the synergistic extraction of hexa- and pentavalent actinide ions, by different combinations of extractants and from different aqueous media, is presented. Structural aspects of the various complexes involved in synergism also are reviewed. A short account of the applications based on synergistic extraction is also given. (author)

  18. Extraction of actinides and lanthanides by calixarenes CMPO. Possibility to separate actinides from lanthanides (Calixpart project)

    The CALIXPART project accepted by the European Community within the framework of the 5 PCRD, relates to the 'selective extraction of minor actinides from H.A. liquid waste by organized matrices'. The objective of this new project is the selective extraction in only one step of minor actinides from a solution of fission products including lanthanides. This separation will be investigated through two strategies: - In the first one, macrocycles will be grafted with ligands containing nitrogen or sulphur which are able to discriminate actinides from lanthanides, but generally present very low distribution coefficients in strongly acidic solutions. Following the example of calixarenes CMPO, the grafting of these ligands on macrocyclic supports should increase the distribution coefficients, and thus allow to use these extractants at nitric acid concentrations up to 3 M. The nitrogen or sulphur ligands are not necessarily selective with respect to the other fission products, and the macrocyclic structure should also afford this necessary selectivity if one wishes to operate in a single step. Once americium and curium separated, the difference in size between both cations is undoubtedly sufficient to make it possible to separate them at the stripping stage. - The second strategy considered is the introduction of two types of ligands (hard and soft) on a macrocyclic structure, the first ensuring the extraction of lanthanides and trivalent actinides, the seconds bringing discrimination between these two groups of cations. (author)

  19. JOWOG 22/2 - Actinide Chemical Technology (July 9-13, 2012)

    Jackson, Jay M. [Los Alamos National Laboratory; Lopez, Jacquelyn C. [Los Alamos National Laboratory; Wayne, David M. [Los Alamos National Laboratory; Schulte, Louis D. [Los Alamos National Laboratory; Finstad, Casey C. [Los Alamos National Laboratory; Stroud, Mary Ann [Los Alamos National Laboratory; Mulford, Roberta Nancy [Los Alamos National Laboratory; MacDonald, John M. [Los Alamos National Laboratory; Turner, Cameron J. [Los Alamos National Laboratory; Lee, Sonya M. [Los Alamos National Laboratory

    2012-07-05

    The Plutonium Science and Manufacturing Directorate provides world-class, safe, secure, and reliable special nuclear material research, process development, technology demonstration, and manufacturing capabilities that support the nation's defense, energy, and environmental needs. We safely and efficiently process plutonium, uranium, and other actinide materials to meet national program requirements, while expanding the scientific and engineering basis of nuclear weapons-based manufacturing, and while producing the next generation of nuclear engineers and scientists. Actinide Process Chemistry (NCO-2) safely and efficiently processes plutonium and other actinide compounds to meet the nation's nuclear defense program needs. All of our processing activities are done in a world class and highly regulated nuclear facility. NCO-2's plutonium processing activities consist of direct oxide reduction, metal chlorination, americium extraction, and electrorefining. In addition, NCO-2 uses hydrochloric and nitric acid dissolutions for both plutonium processing and reduction of hazardous components in the waste streams. Finally, NCO-2 is a key team member in the processing of plutonium oxide from disassembled pits and the subsequent stabilization of plutonium oxide for safe and stable long-term storage.

  20. Advancement of reprocessing technology. The forefront of the actinides/fission products separation

    The subject which is important for building the future back end process of nuclear fuel is the better compatibility of the sharp rise of economic efficiency with global environmental conditions, taking up the fuel cycle system for fast reactors as the object. Wet reprocessing PUREX process is excellent in its reliability and safety, but from the viewpoint of economic efficiency and the load on waste disposal, same pointing-out has been done. In high level waste liquid, trace minor actinides and large amount of Na salt are the problems. As the advancement of PUREX process, the research on the reduction of Na waste liquid is reported. As for the recent improvement, emphasis has been placed on the control of the behavior of Np, Tc and Pt family. As the wet type actinide separation process, transuranium extraction (TRUEX) process is the relatively new, powerful solvent extraction process. Its development is described. By using the real waste liquid generated by the PUREX test of the spent fuel from fast reactors, the multi-stage, opposite flow extraction test on bench scale has been carried out at the hot cell of Chemical Processing Facility. The separation of actinides using macrocyclic compounds is reported. (K.I.)

  1. Partial oxidation of methane over bimetallic copper- and nickel-actinide oxides (Th, U)

    The study of partial oxidation of methane (POM) over bimetallic nickel- or copper-actinide oxides was undertaken. Binary intermetallic compounds of the type AnNi2 (An = Th, U) and ThCu2 were used as precursors and the products (2NiO.UO3, 2NiO.ThO2 and 2CuO.ThO2) characterized by means of X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy and temperature-programmed reduction. The catalysts were active and selective for the conversion of methane to H2 and CO and stable for a period of time of ∼18 h on stream. The nickel catalysts were more active and selective than the copper catalyst and, under the same conditions, show a catalytic behaviour comparable to that of a platinum commercial catalyst, 5 wt% Pt/Al2O3. The catalytic activity increases when uranium replaces thorium and the selectivity of this type of materials is clearly different from that of single metal oxides and/or mechanical mixtures. The good catalytic behaviour of the bimetallic copper- and nickel-actinide oxides was attributed to an unusual interaction between copper or nickel oxide and the actinide oxide phase as showed by H2-TPR, XPS and Raman analysis of the catalysts before and after reaction.

  2. Use of animal studies for assessing intakes of inhaled actinide-bearing dusts

    This paper reviews the methodology used in the execution and interpretation of animal studies (mostly conducted at NRPB) designed to provide guidance on limits of intake and the effectiveness of chest monitoring for persons exposed to various uranium, plutonium, americium, and thorium bearing dusts. The lung retention and transportability characteristics of the actinides in humans have been predicted by combining the absorption rates into blood calculated from the animal studies with particle transport rates from the alveolar region of the human lung. This approach is compatible with the application of the new ICRP respiratory tract model. The results of the animal experiments demonstrate the diversity of the absorption rates for the different chemical forms of the actinides and their disparity from the default values proposed by ICRP for Type F, M, and S compounds in the absence of specific data. The predicted lung retention kinetics of the actinides in humans provide the basis for assessing the validity of chest monitoring; for this purpose the most recent ICRP values for doses per unit intake and deposition in the alveolar region of the lungs have been taken into account. The results show that for some dusts, the data can be interpreted with confidence, while for others the method is impracticable or has considerable uncertainty. Overall, the results support the ICRP recommendation that material specific information is to be preferred for setting limits on intake and interpreting monitoring data. The paper concludes with suggestions for further work. (author). 44 refs., 4 figs., 6 tabs

  3. Selective Media for Actinide Collection and Pre-Concentration: Results of FY 2006 Studies

    Lumetta, Gregg J.; Addleman, Raymond S.; Hay, Benjamin P.; Hubler, Timothy L.; Levitskaia, Tatiana G.; Sinkov, Sergey I.; Snow, Lanee A.; Warner, Marvin G.; Latesky, Stanley L.

    2006-11-17

    In this work, we have investigated new materials for potential use in automated radiochemical separations. The work can be divided into three primary tasks: (1) synthesis of new ligands with high affinity for actinide ions, (2) evaluation of new materials for actinide ion affinity, and (3) computational design of advanced ligand architectures for highly selective binding of actinide ions. Ligand Synthesis Work was conducted on synthesizing Kl?ui ligand derivatives containing functionalized pendant groups on the cyclopentadienyl ring. The functionalized pendent groups would allow these ligands to be attached to organic and inorganic solid supports. This work focused on synthesizing the compound Na[Cp?Co(PO(OC2H5)2)3], where Cp?= C5H4C(O)OCH3. Synthesizing this compound is feasible, but the method used in FY 2006 produced an impure material. A modified synthetic scheme has been developed and will be pursued in FY 2007. Work was also initiated on synthesizing bicyclic diamides functionalized for binding to polymeric resins or other surfaces. Researchers at the University of Oregon are collaborators in this work. To date, this effort has focused on synthesizing and characterizing a symmetrically substituted bicyclic diamide ligand with the ?COOH functionality. Again, this synthetic effort will continue into FY 2007. Separations Material Evaluation Work was conducted in FY 2006 to provide a more extensive set of data on the selectivity and affinity of extraction chromatography resins prepared by sorption of Kl?ui ligand onto an inert macroreticular polymeric support. Consistent with previous observations, it was found that these materials strongly bind tetravalent actinides. These materials also adsorb trivalent actinides at low nitric acid concentrations, but the affinity for the trivalent actinides decreases with increasing nitric acid concentration. These materials have relatively low affinity for U(VI), but they do sorb U(VI) to a greater extent than Am(III) at [HNO

  4. Transmutation of minor actinide using thorium fueled BWR core

    One of the methods to conduct transmutation of minor actinide is the use of BWR with thorium fuel. Thorium fuel has a specific behaviour of producing a little secondary minor actinides. Transmutation of minor actinide is done by loading it in the BWR with thorium fuel through two methods, namely close recycle and accumulation recycle. The calculation of minor actinide composition produced, weigh of minor actinide transmuted, and percentage of reminder transmutation was carried SRAC. The calculations were done to equivalent cell modeling from one fuel rod of BWR. The results show that minor actinide transmutation is more effective using thorium fuel than uranium fuel, through both close recycle and accumulation recycle. Minor actinide transmutation weight show that the same value for those recycle for 5th recycle. And most of all minor actinide produced from 5 unit BWR uranium fuel can transmuted in the 6th of close recycle. And, the minimal value of excess reactivity of the core is 12,15 % Δk/k, that is possible value for core operation

  5. Research needs in metabolism and dosimetry of the actinides

    The following topics are discussed: uranium mine and mill tailings; environmental standards; recommendations of NCRP and ICRP; metabolic models and health effects; life-time exposures to actinides and other alpha emitters; high-specific-activity actinide isotopes versus naturally occurring isotopic mixtures of uranium isotopes; adequacy of the n factor; and metabolism and dosimetry;

  6. Solubility of actinides and surrogates in nuclear glasses

    The nuclear wastes are currently incorporated in borosilicate glass matrices. The resulting glass must be perfectly homogeneous. The work discussed here is a study of actinide (thorium and plutonium) solubility in borosilicate glass, undertaken to assess the extent of actinide solubility in the glass and to understand the mechanisms controlling actinide solubilization. Glass specimens containing; actinide surrogates were used to prepare and optimize the fabrication of radioactive glass samples. These preliminary studies revealed that actinide Surrogates solubility in the glass was enhanced by controlling the processing temperature, the dissolution kinetic of the surrogate precursors, the glass composition and the oxidizing versus reducing conditions. The actinide solubility was investigated in the borosilicate glass. The evolution of thorium solubility in borosilicate glass was determined for temperatures ranging from 1200 deg C to 1400 deg C.Borosilicate glass specimens containing plutonium were fabricated. The experimental result showed that the plutonium solubility limit ranged from 1 to 2.5 wt% PuO2 at 1200 deg C. A structural approach based on the determination of the local structure around actinides and their surrogates by EXAFS spectroscopy was used to determine their structural role in the glass and the nature of their bonding with the vitreous network. This approach revealed a correlation between the length of these bonds and the solubility of the actinides and their surrogates. (author)

  7. Separations chemistry for actinide elements: Recent developments and historical perspective

    With the end of the cold war, the principal mission in actinide separations has changed from production of plutonium to cleanup of the immense volume of moderately radioactive mixed wastes which resulted from fifty years of processing activities. In order to approach the cleanup task from a proper perspective, it is necessary to understand how the wastes were generated. Most of the key separations techniques central to actinide production were developed in the 40's and 50's for the identification and production of actinide elements. Total actinide recovery, lanthanide/actinide separations, and selective partitioning of actinides from inert constituents are currently of primary concern. To respond to the modern world of actinide separations, new techniques are being developed for separations ranging from analytical methods to detect ultra-trace concentrations (for bioassay and environmental monitoring) to large-scale waste treatment procedures. In this report, the history of actinide separations, both the basic science and production aspects, is examined and evaluated in terms of contemporary priorities

  8. Actinide management with commercial fast reactors

    The capability of plutonium-breeding and minor-actinide (MA) transmutation in the Japanese commercial sodium-cooled fast reactor offers one of practical solutions for obtaining sustainable energy resources as well as reducing radioactive toxicity and inventory. The reference core design meets the requirement of flexible breeding ratio from 1.03 to 1.2. The MA transmutation amount has been evaluated as 50-100 kg/GWey if the MA content in fresh fuel is 3-5 wt%, where about 30-40% of initial MA can be transmuted in the discharged fuel

  9. The electrochemical properties of actinide amalgams

    Selection of the values of standard potentials of An actinides and their amalgams was made. On the basis of the data obtained energy characteristics of alloy formation processes in the systems An-Hg were calculated and analyzed. It is ascertained that the properties of f-element solutions in mercury are similar to those of alkali and alkaline-earth metal amalgams with the only difference, i.e. in case of active metals of group 3 the number of realized charge value of ionic frames in condensed phase increases

  10. Status of nuclear data for actinides

    Guzhovskii, B.Y.; Gorelov, V.P.; Grebennikov, A.N. [Russia Federal Nuclear Centre, Arzamas (Russian Federation)] [and others

    1995-10-01

    Nuclear data required for transmutation problem include many actinide nuclei. In present paper the analysis of neutron fission, capture, (n,2n) and (n,3n) reaction cross sections at energy region from thermal point to 14 MeV was carried out for Th, Pa, U, Np, Pu, Am and Cm isotops using modern evaluated nuclear data libraries and handbooks of recommended nuclear data. Comparison of these data indicates on substantial discrepancies in different versions of files, that connect with quality and completeness of original experimental data.