WorldWideScience

Sample records for zu dem ubereinkommen

  1. Social Entrepreneurship im etablierten Wohlfahrtsstaat : Aktuelle empirische Befunde zu neuen und alten Akteuren auf dem Wohlfahrtsmarkt

    OpenAIRE

    Heinze, Rolf G.; Schönauer, Anna-Lena; Schneiders, Katrin; Grohs, Stephan; Ruddat, Claudia

    2013-01-01

    Im internationalen Vergleich hat sich die wissenschaftliche Diskussion um die gesellschaftliche Relevanz des Phänomens „Social Entrepreneurship“ (SE) in Deutschland relativ spät entwickelt. In Asien wurde die Debatte insbesondere durch die von Muhammad Yunus 1983 gegründete Grameen Bank angestoßen und spätestens seit der Auszeichnung Yunus‘ mit dem Friedensnobelpreis wird SE in vielen Nationen zunehmend als Chance wahrgenommen, soziale Missstände effektiv und nachhaltig zu bekämpfen....

  2. Quantenphysik und Kommunikationswissenschaft auf dem Weg zu einer allgemeinen Theorie der Kommunikation

    CERN Document Server

    Hamberger, Erich

    2015-01-01

    Der Quantenphysiker Herbert Pietschmann beschäftigt sich seit Jahrzehnten mit dem Phänomen Kommunikation. Der Kommunikationswissenschaftler Erich Hamberger setzt sich seit langem mit der Frage der Adaptierung erkenntnistheoretischer Einsichten der Quantentheorie für die Geistes- und Biowissenschaften auseinander. 2003 begegnen sich die beiden - und staunen über die „verschränkten Erkenntnisinteressen“. 2006 bestreiten sie eine erste gemeinsame universitäre Lehrveranstaltung. 2011 folgt Das Phänomen Kommunikation transdisziplinär betrachtet. Aus ihrer Zusammenarbeit ist dieses Buch entstanden. Naturwissenschaft arbeitet auf der Grundlage des mechanistischen Denkrahmens. Die bisher einzige Ausnahme ist die Quantenphysik. Weder Leben noch Kommunikation ist mittels des mechanistischen Denkrahmens zu verstehen. Auch der Denkrahmen der Quantenphysik reicht dazu nicht aus. Der Bedarf nach adäquatem Denken im Bereich der Kommunikation kann durch quantenphysikalisches Denken NICHT befriedigt werden, jedoc...

  3. Auf dem Weg zu semantischen APIs für Forschungsdatendienste

    Directory of Open Access Journals (Sweden)

    Anna Fensel

    2017-09-01

    Full Text Available Die schnelle Entwicklung der Internet- und Web-Technologie verändert den Stand der Technik in der Kommunikation von Wissen oder  Forschungsergebnissen. Insbesondere werden semantische Technologien, verknüpfte und offene Daten zu entscheidenden Faktoren für einen  erfolgreichen und effizienten Forschungsfortschritt. Zuerst definiere ich den Research Data Service (RDS und diskutiere typische aktuelle  und mögliche zukünftige Nutzungsszenarien mit RDS. Darüber hinaus bespreche ich den Stand der Technik in den Bereichen semantische Dienstleistung und Datenanmerkung und API-Konstruktion sowie infrastrukturelle Lösungen, die für die RDS-Realisierung anwendbar sind. Zum Schluss werden noch innovative Methoden der Online-Verbreitung, Förderung und effizienten Kommunikation der Forschung diskutiert.

  4. Euphemismen und Dysphemismen im Flexibilisierungsdiskurs. Auf dem Weg zu einem mehrperspektivischen Untersuchungsdesign

    Directory of Open Access Journals (Sweden)

    Goranka Rocco

    2015-07-01

    Full Text Available Abstract – This article outlines  theoretical and empirical prolegomena to the discourse-analytical study of euphemisms and dysphemisms which appear in the discourse of ‘flexibility’. After giving an operative definition of the euphemisms and dysphemisms and discussing some epistemological and other problems, the article presents an „EuDy-Modell“ called framework for studying euphemisms and dysphemisms from the perspective of discourse linguistics.Abstract – Der Beitrag enthält theoretische und empirische Prolegomena zu einer diskurslinguistisch orientierten Untersuchung von Euphemismen und Dysphemismen im Flexibilisierungsdiskurs. Zunächst werden eine funktionale Arbeitsdefinition der Begriffe Euphemismus und Dysphemismus gegeben und einige epistemologische und andere Probleme des Forschungsvorhabens erörtert, um im Anschluss ein Modell zur Analyse von Euphemismen und Dysphemismen aus der diskurslinguistischen Perspektive – das „EuDy-Modell“ – vorzustellen.

  5. „Weder dem Vergangenen anheimfallen noch dem Zukünftigen. Es kommt darauf an, ganz gegenwärtig zu sein“

    Directory of Open Access Journals (Sweden)

    Christian Filk

    2012-03-01

    Full Text Available Aufwachsen und Leben in der Wissensgesellschaft wird schon länger durch die Diskussion um ‚Informationsarme‘ und ‚Informationsreiche‘ begleitet. Jüngere wissenschaftliche Studien belegen das mangelnde oder gar nicht vorhandene Wissen zu wichtigen politischen, geschichtlichen und ethischen Themen wie Nationalsozialismus und Shoah. Christian Filk untersucht wesentliche Grundsätze moderner Geschichtsschreibung und den angemessenen Einsatz von Wissensmedien. Schliesslich erörtert er, wie elektronische, digitale und soziale Medien dazu beitragen können, mehr über den Genozid von etwa sechs Millionen europäischen Juden während des Zweitens Weltkriegs zu erfahren.For some time, growing up and living in a knowledge-based society is accompanied by the discussion on ‚information poor‘ and ‚information rich‘. Recent Scientific studies show the lack or non-existing knowledge on important political, historical and ethical issues such as Nazism and the Holocaust. Christian Filk examines essential principles of modern history and appropriate use of knowledge media. Finally he discusses, how electronic, digital and social media could help to learn more about the genocide of six million European Jews during World War II.

  6. Lider fallen zu wie die Tore der Burg : [luuletused kogust "Simunapäev"] / Kristiina Ehin ; aus dem Estnischen von Gisbert Jänicke

    Index Scriptorium Estoniae

    Ehin, Kristiina, 1977-

    2004-01-01

    Sisu: die nachricht von der sanktgeorgsnacht = Jüriöö sõnum ; sie standen unter einem schiefen dach = nad seisid viltuse katuse all ; "der soldat steht auf dem hof ..." = "püssimees seisab õues..." ; "der mond heult..." = "kuu ulub..." ; der frauenräuber = naisteröövija ; "ich schlafe als schlamm im wald..." = "magan mudana metsas..." ; "ruhig erhebt sich der weihrauchdunst..." = "vaikselt tõuseb taevasse..."

  7. Teatras popieriaus lape: Egono Schiele’s ekspresionistiniai autoportretai | Das Theater auf dem Papierblatt: zu den expressionistischen Selbstbildnissen von Egon Schiele

    Directory of Open Access Journals (Sweden)

    Dalia Kolytaitė

    2004-01-01

    Full Text Available Im Werk von Egon Schiele ist der Körper (besonders sein eigener mit seinen mannigfaltigen Ausdrucksformen ein zentrales Thema. Die stark ausgeprägte und sehr spezifische Körpersprache entwickelte der Künstler vor dem Spiegel, wovon nicht nur biographische Daten, sondern auch Photos zeugen. Mit dem ausdrucksvollen Variieren seines Körpers präsentiert Schiele seine Neigung zum Wechseln der Identität, der Rollen, des Selbst, wobei er sich gleichzeitig in drei Positionen befindet: des Darstellers, des Regisseurs und des Zuschauers.Als Objekt der Analyse wurden die sechs Selbstbildnisse ausgewählt: „Selbstbildnis mit kariertem Hemd“ (1917, „Der Prediger (Selbstbildnis“ (1913, „Der Kämpfer (Selbstbildnis“ (1913, „Sitzender männlicher Akt (Selbstbildnis“ (1917, „Der Tänzer (Selbstbildnis“ (1911, „Männlicher Halbakt mit rotem Lendentuch (Selbstbildnis“ (1914. Sie stellen verschiedene plastischen Konfigurationen des Körpers im Raum dar. Obwohl diese Bilder in unterschiedlichen Jahren entstanden sind, lassen sich alle sechs Selbstbildnisse aufgrund der ähnlichen Darstellungsweise, Manier und derselben Technik als ein Pantomimestück betrachten. Für eine solche Betrachtungsweise spricht nicht nur die visuelle Assoziation – der Körper in allen Bildern stellt gleichsam stillgestellte Fragmente einer Bewegung dar, wie man dies bei den Photoherausgaben von Pantomimen oder beim Drehen eines Stummfilmes (sie haben ja die gleichen Elemente Bild und Bewegung beobachten kann. Den Anstoß für eine solche Behauptung gibt die Kunstgattung der Pantomime selbst. Sie ist ja „die große schweigende Kunst“, „das Spiel des bewusst bewegten Körpers“, „die Kunst der Form“, und das „Material, aus dem diese Form geschaffen wird, ist der menschliche Körper“. Schieles Selbstbildnisse entsprechen ihren Grundforderungen: dem begrenzten Raum, der Beleuchtung, dem eng am Körper anliegenden Kostüm, der sehr pers

  8. Melanie Ulz: Auf dem Schlachtfeld des Empire. Männlichkeitskonzepte in der Bildproduktion zu Napoleons Ägyptenfeldzug. Marburg: Jonas Verlag 2008.

    Directory of Open Access Journals (Sweden)

    Wolfgang Schmale

    2010-11-01

    Full Text Available Der Ägyptenfeldzug Napoleons am Ende des 18. Jahrhunderts wurde im Nachhinein bildpublizistisch extensiv aufgearbeitet. Diese Publizistik wird von Melanie Ulz unter dem Gesichtspunkt dargestellter und sich wandelnder Männlichkeitskonzepte untersucht. Zentral entfaltet sich in den Visualisierungen der später so genannte „Orientalismus“. Dem europäischen/französischen Mann und Krieger wird der orientalische Mann als multivalentes und kulturell unterlegenes Wesen gegenübergestellt. Bei aller Subtilität der Kunst handelt es sich im Kern um die Gegenüberstellung von Stereotypen. Ulz kann in ihrer Studie überzeugend den sexuierten Subtext des Orientalismus nachweisen.Napoleon’s Campaign of Egypt at the end of the 18th century had afterwards been worked with and addressed in graphical media extensively. Melanie Ulz analyzes these media in respect to expressed as well as changing concepts of masculinity. The visualizations essentially display what has later been called “Orientalism”. The European/ French man and warrior is opposed to the Oriental man, who is depicted as multivalent and culturally inferior. Despite the subtlety of the art, the works basically deal with the opposition of stereotypes. Ulz manages to convincingly prove the sexualized subtext of Orientalism.

  9. Auf dem Weg zu einer ‹vernetzenden› Profession. Theoretisch-konzeptionelle Überlegungen zum Selbstverständnis der Medienpädagogik

    Directory of Open Access Journals (Sweden)

    Kai-Uwe Hugger

    2017-06-01

    Full Text Available In die Professionalisierungsdebatte der erziehungswissenschaftlichen Disziplin gehört auch die Auseinandersetzung mit dem Selbstverständnis der Medienpädagogik bzw. des Medienpädagogen. Die Medienpädagogische Professionalisierungsdiskussion stellt daher für den Autor gleichzeitig die Basis für einen Klärungsversuch einer medienpädagogischen Identität dar. Er beschreibt und analysiert Professionalisierungsstrategien aufgrund von vier Konzepten medienpädagogischer Professionalität: der beschützend-wertevermittelnde, der gesellschaftskritisch-wissenschaftszentrierte, der bildungstechnologisch-opitimierende und der vernetzte Medienpädagoge. Über den Begriff der Medienkompetenz nach Baacke stellt er zentrale Eckpunkte einer Struktur medienpädagogischen Handelns auf. (DIPF/Orig..

  10. Hin zu Utopia - eine empirische Spekulation

    Directory of Open Access Journals (Sweden)

    Wolfgang Frindte

    2017-04-01

    Full Text Available Hin zu Utopia - eine empirische Spekulation (von Wolfgang Frindte & Nico Dietrich Der vorliegende Text nutzt Befunde, die die Autoren im Rahmen einer Studie zu Einstellungen gegenüber Muslimen und dem Islam erhoben haben (Frindte/Dietrich 2017, um über die Möglichkeit einer kosmopolitischen Utopie zu spekulieren und nach den Akteuren der Zukunft und den künftigen Gestaltern eines friedlichen und menschenfreundlichen europäischen Kontinents zu fahnden. Im Ergebnis ihrer Suche kommen die Autoren zu dem Schluss: Es gibt noch immer gebildete und politisch informierte Menschen, die eine positive Sicht auf ethnische Minderheiten, Flüchtlinge im Allgemeinen und Muslime im Besonderen haben, autoritäre und machtorientierte Gesellschaftsstrukturen ablehnen und sich mit Europa identifizieren. Auf ihren persönlichen Einsatz, ihre Entschlossenheit, ihren Zusammenhalt über die Zeit und ihre Zukunftsorientierung kommt es an.

  11. Beiträge zu einer kognitiv ausgerichteten Lexikographie

    African Journals Online (AJOL)

    rbr

    Jahrhunderten immer wieder abgelegte Bekenntnis zu dem Satz Sprache dient dem Ausdruck von Gedanken oder einer seiner Varianten zeigt, kognitive Orien- tierung ein altes Programm mit Sprache befaßter Disziplinen ist, hat sich eine. Linguistik, die dieses Programm wirklich auf ihre Fahnen geschrieben hat, erst.

  12. Neues aus dem Forschungsfeld Deutsch als Zweitsprache. Sammelrezension

    Directory of Open Access Journals (Sweden)

    Claus Altmayer

    2015-03-01

    Full Text Available Neues aus dem Forschungsfeld Deutsch als Zweitsprache. Sammelrezension (Teil 2 von Bernt Ahrenholz (Hrsg. (2009, Empirische Befunde zu DaZ-Erwerb und Sprachförderung. Beiträge aus dem 3. ‚Workshop Kinder mit Migrationshintergrund‘; Karen Schramm & Christoph Schröder (Hrsg. (2009, Empirische Zugänge zu Spracherwerb und Sprachförderung in Deutsch als Zweitsprache; Stefan Jeuk (2010, Deutsch als Zweitsprache in der Schule. Grundlagen - Diagnose – Förderung

  13. Beiträge zu einer kognitiv ausgerichteten lexikographie | Figge ...

    African Journals Online (AJOL)

    Nach einer "kognitiven Wende" in der Psychologie in der zweiten Hälfte der sechziger Jahre haben auch Teile der Linguistik und der Psycholinguistik begonnen, sich kognitiv zu orientieren. Hier wird ein Modell zugrunde gelegt, nach dem sprachliche Einheiten auf Einheiten des Gedächtnisses referieren. Einheiten des ...

  14. Der Ritter mit dem Hemd : drei Fassungen einer mittelalterlichen Erzählung

    OpenAIRE

    Dunphy, Graeme

    2011-01-01

    Unter den zahlreichen Motiven, die in der mittelalterlichen Literatur mit Frauendienst verbunden sind, gehört das vom Ritter mit dem Hemd zu den besonders interessanten. Es erscheint zunächst in dem ersten von fünf Fabliaux aus einer verlorenen Turiner Handschrift, die dem sonst unbekannten altfranzösischen Dichter Jacques de Baisieux zugeschrieben werden, einer heiteren Kurzgeschichte mit dem Titel "Des trois chevaliers et del chainse". In der vorliegenden Untersuchung gilt es, der Frage der...

  15. Zwei Anmerkungen zu WACC

    OpenAIRE

    Löffler, Andreas

    2017-01-01

    Der WACC–Ansatz zählt zu den beliebtesten Verfahren der Unternehmensbewertung. In dieser Note wird gezeigt, dass dieser Ansatz auch dann verwendet werden kann, wenn die von Miles und Ezzell getroffene Annahme einer konstanten Kapitalstruktur fallen gelassen und die WACC-Bewertungsgleichung entsprechend angepasst wird. Des Weiteren wird gezeigt, wie der WACC-Ansatz in ein zeitstetiges Modell übertragen werden kann. Die sich ergebende Bewertungsgleichung zeigt große Ähnlichkeiten mit den Er...

  16. S1-Leitlinie Lipödem.

    Science.gov (United States)

    Reich-Schupke, Stefanie; Schmeller, Wilfried; Brauer, Wolfgang Justus; Cornely, Manuel E; Faerber, Gabriele; Ludwig, Malte; Lulay, Gerd; Miller, Anya; Rapprich, Stefan; Richter, Dirk Frank; Schacht, Vivien; Schrader, Klaus; Stücker, Markus; Ure, Christian

    2017-07-01

    Die vorliegende überarbeitete Leitlinie zum Lipödem wurde unter der Federführung der Deutschen Gesellschaft für Phlebologie (DGP) erstellt und finanziert. Die Inhalte beruhen auf einer systematischen Literaturrecherche und dem Konsens von acht medizinischen Fachgesellschaften und Berufsverbänden. Die Leitlinie beinhaltet Empfehlungen zu Diagnostik und Therapie des Lipödems. Die Diagnose ist dabei auf der Basis von Anamnese und klinischem Befund zu stellen. Charakteristisch ist eine umschriebene, symmetrisch lokalisierte Vermehrung des Unterhautfettgewebes an den Extremitäten mit deutlicher Disproportion zum Stamm. Zusätzlich finden sich Ödeme, Hämatomneigung und eine gesteigerte Schmerzhaftigkeit der betroffenen Körperabschnitte. Weitere apparative Untersuchungen sind bisher besonderen Fragestellungen vorbehalten. Die Erkrankung ist chronisch progredient mit individuell unterschiedlichem und nicht vorhersehbarem Verlauf. Die Therapie besteht aus vier Säulen, die individuell kombiniert und an das aktuelle Beschwerdebild angepasst werden sollten: komplexe physikalische Entstauungstherapie (manuelle Lymphdrainage, Kompressionstherapie, Bewegungstherapie, Hautpflege), Liposuktion und plastisch-chirurgische Interventionen, Ernährung und körperliche Aktivität sowie ggf. additive Psychotherapie. Operative Maßnahmen sind insbesondere dann angezeigt, wenn trotz konsequent durchgeführter konservativer Therapie noch Beschwerden bestehen bzw. eine Progredienz des Befundes und/oder der Beschwerden auftritt. Eine begleitend zum Lipödem bestehende morbide Adipositas sollte vor einer Liposuktion therapeutisch angegangen werden. © 2017 The Authors | Journal compilation © Blackwell Verlag GmbH, Berlin.

  17. Emotional Branding in der Automobilindustrie: ein Schlüssel zu langfristigem Markenerfolg?

    OpenAIRE

    Nadler, Sabrina; Rennhak, Carsten

    2011-01-01

    In der Automobilindustrie vollzieht sich aktuell ein Wandel von der Technik- zur Kundenorientierung. Die Konsumenten sollen Produkte und Dienstleistungen nicht nur einfach nutzen, sondern eine emotionale Bindung zu ihnen aufbauen und sie im Idealfall sogar lieben. Seit Gobé (2001) werden entsprechende Markenführungsansätze mit dem Schlagwort „Emotional Branding“ bezeichnet.

  18. Ein Versuch, Naturverhältnisse aus feministischer Sicht zu interpretieren

    Directory of Open Access Journals (Sweden)

    Helga Purgand

    2002-07-01

    Full Text Available Mit dem vorliegenden Sammelband Geschlechterverhältnisse – Naturverhältnisse wird nach dem innovativen Beitrag der feministischen Debatte für umweltsoziologisches Denken gefragt und nach Überschneidungen, Grenzen und Zwischenräumen zwischen „Geschlecht“ und „Natur“ gesucht. In ihm wird der lobenswerte Versuch unternommen, einen Zusammenhang zwischen Geschlechter- und Naturverhältnissen herzustellen „die in der Umweltsoziologie bislang stark vernachlässigte feministische Diskussion und Geschlechterforschung einzubeziehen und als genderbezogene Perspektive zu etablieren“. (S. 9 Das Buch enthält Beiträge von 15 Autorinnen, die unterschiedliche Natur- und Geschlechtsverhältnisse facettenreich, überwiegend kreativ und theoretisch anspruchsvoll betrachten. Das Buch enthält Zugänge aus der allgemeinen Soziologie, den Sprach- und Kulturwissenschaften, aus politik- und naturwissenschaftlichen Zusammenhängen. Den ausdrücklich formulierten Anspruch, von multi- zu einer inter-disziplinären Durchdringung zu gelangen, erfüllt es nur in Ansätzen (besonders mit der Einleitung und den theoretischen Problemexplikationen. Das zustande gekommene „Nach-, Zusammen- und Querdenken“ über Begriffe, Theorien und neuere Forschungsansätze (von Foucault über Butler bis zu Donna Haraway belegt die Notwendigkeit, die naturwissenschaftlichen Annahmen „immanent zu dekonstruieren“. Sehr aufschlussreich sind in diesem Zusammenhang die Beiträge von Irmgard Schultz, Elvira Scheich, aber auch von Mary Mellor und besonders von Paula-Irene Villa, die interessante und kreative Gedanken zur Klärung des Verhältnisses von Natur, Kultur und Geschlecht anbieten. Deutlich wurde, dass weiterhin ein kontroverses Ringen um angemessene konzeptionelle Fassungen von Geschlechts- und Naturverhältnissen und die Integration von Gender als zentraler analytischer Querschnitts-Kategorie nötig sind. Insgesamt ist dem Buch ist eine schnelle Verbreitung und

  19. Geschlecht zwischen Körper und Konstruktion: Aktuelle Impulse zu einer langen Debatte

    Directory of Open Access Journals (Sweden)

    Natascha Gruber

    2002-11-01

    Full Text Available Die mit dem Erscheinen von Judith Butlers Unbehagen der Geschlechter ausgelöste „Essentialismus versus Konstruktivismus“-Debatte um die Frage, wie Materialität und Körper zu denken sei, hält die Geschlechterforschung bis heute in dilemmatischer Spannung. Kann auf die Kategorie Geschlecht überhaupt verzichtet werden? Der Sammelband Verhandlungen des Geschlechts dokumentiert anhand von 15 Beiträgen aus den Bereichen Kulturwissenschaften, Philosophie, Psychoanalyse und Politik die aktuelle Entwicklung der Debatte rund um den an Butler orientierten feministischen Konstruktionsbegriff. Unter Rückgriff auf unterschiedliche Ansätze wird versucht, zwischen „Körper“ und „Diskurs“ zu vermitteln und Materialität neu zu denken.

  20. kawaihae_dem.grd

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to...

  1. Die Geburt des Kosmos aus dem Nichts die Theorie des inflationären Universums

    CERN Document Server

    Guth, Alan

    2002-01-01

    Selten wird die Wissenschaft über Nacht so stark revolutioniert wie die Kosmologie durch Alan Guths Entdeckung der inflationären Theorie des Universums. Noch seltener gelingt es dem Urheber einer solchen Revolution, eine derart verständliche und einprägsame Darstellung von einer der aufregendsten Epochen in der modernen Kosmologie zu geben. Sogar Kenner werden Neues lernen.

  2. Theoretical and experimental investigations of on-board control of combustion air and/or fuel for emission reduction in internal combustion engines. Final report; Durchfuehrung theoretischer und experimenteller Untersuchungen zu den Moeglichkeiten der On-Board-Beeinflussung der Verbrennungsluftzusammensetzung und/oder des Kraftstoffs fuer Verbrennungsmotoren mit dem Ziel der Emissionsminderung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Velji, A.; Hofmann, U.

    2001-11-01

    Theoretical and experimental investigations were made in order to find the optimal composition of combustion air for simultaneous reduction of NOx and particulate emissions. The effect was found to be in the same order of magnitude as with exhaust recirculation. 'Optimized' air should have an oxygen content of more than 20 percent and a CO2 content of more than 10 percent, with nitrogen more or less accounting for the rest. [German] Ausgehend von der Abgasrueckfuehrung wurde in theoretischen und experimentellen Untersuchungen die optimale Zusammensetzung der Verbrennungsluft zur gleichzeitigen Reduktion der NO{sub x}- und Partikelemission ermittelt. Es konnte gezeigt werden, dass es mit dieser Verbrennungsluft moeglich ist, eine aehnlich hohe NO{sub x}-Reduktion wie bei der Abgasrueckfuehrung zu erzielen, ohne dass die Partikelemission drastisch ansteigt. Die 'optimale' Verbrennungsluft muss einen Sauerstoffgehalt groesser als 20% und einen CO{sub 2}-Gehalt groesser als 10% aufweisen. Der Rest besteht im Wesentlichen aus Stickstoff. (orig.)

  3. Wie viel muss ich wissen, um global handeln zu können? Verantwortung für Weltarmut und das Problem der epistemischen Überforderung

    Directory of Open Access Journals (Sweden)

    Weber-Guskar Eva

    2015-12-01

    Full Text Available Was heißt es, sich in unserer globalisierten Welt als eine vollverantwortliche Person zu verstehen und zu verhalten? Einerseits scheint es richtig, dass wir global verantwortlich sind, d.h. dass wir auch gegen entferntes Leid etwas tun sollten; andererseits aber ist wegen vielfacher Überforderungsproblemen unklar ist, wie man diese Verantwortung tatsächlich übernehmen können soll – was wiederum dagegen spricht, dass wir diese Verantwortung berechtigtermaßen zuschreiben können. Um einen Aspekt dieses großen Themas zu behandeln, konzentriere ich mich in diesem Aufsatz auf den Anwendungsbereich von extremer Armut und argumentiere in folgenden Schritten. Zuerst spitze ich das Thema zu auf ein Problem, das Samuel Scheffler in diesem Zusammenhang konstatiert hat, nämlich einen Widerstreit zwischen dem, was Verantwortung unter den Bedingungen der Globalisierung bedeutet und dem, wie wir uns grundsätzlich als Handelnde zu verstehen gewohnt sind. Dann zeige ich erstens, dass dem Thema einer epistemischen Überforderung dabei entscheidendes Gewicht zugesprochen wird, zweitens jedoch, dass sich, genauer besehen, dieses Problem gar nicht in dieser Art stellt. Dafür schlage ich eine Analyse des Verantwortungsbegriffs vor, die es ermöglicht, Kriterien zu identifizieren, anhand derer gewisse Grenzen gezogen werden können, so dass die Zuschreibung der Verantwortung gerechtfertigt werden kann.

  4. Coastal Digital Elevation Models (DEMs)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation models (DEMs) of U.S. and other coasts that typically integrate ocean bathymetry and land topography. The DEMs support NOAA's mission to understand...

  5. Der antiskeptische Boden unter dem Gehirn im Tank

    OpenAIRE

    Müller, Olaf L.

    2001-01-01

    Crispin Wright hat die bislang beste Rekonstruktion von Putnams Beweis gegen die skeptische Hypothese vom Gehirn im Tank vorgelegt. Aber selbst in Wrights Fassung hat der Beweis einen Mangel: Er wird mithilfe eines Prädikates wie z.B. "Tiger" geführt und funktioniert nur, wenn man sich darauf verlassen kann, dass es Tiger wirklich gibt. Aber die Skeptikerin bestreitet, über die Existenz von Tigern bescheid zu wissen. Das Problem lässt sich dadurch beheben, dass man den Beweis – statt mit dem ...

  6. Stille wird zu Farben : [aus "Vaikus saab värvideks" ("Stille wird zu Farben")] : [luuletused] / Jaan Kaplinski ; tlk. Irja Grönholm ja Gisbert Jänicke

    Index Scriptorium Estoniae

    Kaplinski, Jaan, 1941-

    2006-01-01

    Sisu: Stille wird zu Farben ; Der letzte rote Apfel ; Wer allein bleibt ; Ruf nach dem Vorherigen ; Mit jedem Frühling ; So viele Namen ; In die Spuren ; Höher ; Es wird Licht ; Mit dem Sommerwrind um die Wette ; Ob sie noch hört. Orig.: Vaikus saab värvideks ; Viimane verev õun ; Üksi jääb ; Hüüab eelmist ; Iga kevadega ; Niipalju nimesid ; Astub tuule jälgedele ; Käib kõrgemalt ; Saab valguseks ; Suvetuulega võidu ; Kas kuuleb enam

  7. Literatur zu Gast im Globe

    CERN Multimedia

    2006-01-01

    Der deutsche Schriftsteller Thomas LEHR liest am 23. März 2006 aus seinem Roman '42', einem philosophischen Abenteuerroman über die Suche nach der Zeit, erzählt in einer funkelnden und souveränen Sprache. Eine Welt von vernichtender Schönheit und bizarren Schrecken wartet auf eine Besuchergruppe, die in der Nähe von Genf die unterirdischen Anlagen des Forschungszentrums für Teilchenphysik CERN besichtigt. Als sie um 12:47:42 wieder ans Tageslicht tritt, scheint ganz Europa in einen Dornröschenschlaf gefallen. Allein die 70 Besucher können sich noch bewegen. Monate und Jahre verharrt die Welt wie in einer riesigen dreidimensionalen Fotografie, bis ein wiederum schockierendes Ereignis die 'Chronifizierten' aus ihren physikalischen Spekulationen und seltsamen Lebensformen reisst. Zu dieser literarischen Veranstaltung im 'Globe of Science and Innovation' laden gemeinsam das Generalkonsulat der Bundesrepublik Deutschland in Genf und CERN ein. Vor Beginn der Lesung wird eine Führung in deutscher Sprac...

  8. Beiträge zu einer kognitiv ausgerichteten Lexikographie

    Directory of Open Access Journals (Sweden)

    Udo L. Figge

    2011-10-01

    Full Text Available

    Zusammenfassung: Nach einer "kognitiven Wende" in der Psychologie in der zweitenHälfte der sechziger Jahre haben auch Teile der Linguistik und der Psycholinguistik begonnen, sichkognitiv zu orientieren. Hier wird ein Modell zugrunde gelegt, nach dem sprachliche Einheiten aufEinheiten des Gedächtnisses referieren. Einheiten des Gedächtnisses sind zunächst Merkmale,sodann Konzepte, die sich aus Merkmalen konstituieren, und schließlich Gebilde von Merkmalen,Konzepten und Beziehungen zwischen Merkmalen. Eine solche Konzeption entspricht in denGrundzügen zeitgenössischen neuropsychologischen Erkenntnissen. Konzepte manifestieren sichin substantivischen Satzgliedern. Die Bedeutung eines Substantivs ist lexikographisch als Mengevon Merkmalen zu beschreiben, und zwar ohne Beachtung der ohnehin schwer zu rechtfertigendenUnterscheidung zwischen semantischem und enzyklopädischem Wissen. Die Bedeutungeines attributiven Adjektivs ist lexikographisch als Merkmal der Konzepte zu beschreiben, diedurch die zugehörigen Substantive ausgedrückt werden. Einem Verb liegt ein konverses Netz vonMerkmalen zugrunde; es muß lexikographisch dieser Bedeutung entsprechend beschrieben werden.Bei der Beschreibung von Substantiven ist systematisch zwischen echten Substantiven undsolchen Substantiven zu unterscheiden, die, meist als Ableitungen, eine verbale oder adjektivischeBedeutung haben. Insbesondere ist zu beachten, daß solche Substantive in Nebensatzäquivalentendie Funktion substantivischer Verbformen haben, daß sie weiterhin auch substantivische Bedeutungannehmen können und daß sie schließlich häufig Konstituenten von Stützverbgefügen sind.Die Bedeutung von Konjunktionen und von Präpositionen in Nebensatzäquivalenten kann nurnach einer exakten grammatischen Analyse verläßlich beschrieben werden. Texte werden unteranderem durch Textgliederungssignale gegliedert, die meist die Gestalt von Adverbien oder Adverbialenhaben. Diese

  9. Rehkitzrettung mit dem Fliegenden Wildretter: Erfahrungen der ersten Feldeinsätze

    OpenAIRE

    Wimmer, Tilman; Israel, Martin; Haschberger, Peter; Weimann, Anita

    2013-01-01

    Der Fliegende Wildretter des Deutschen Zentrums für Luft- und Raumfahrt ist als prototypische Kleinserie seit dem Jahr 2010 erfolgreich in Deutsch-land und Österreich im Einsatz, um aus der Luft Wildtiere während der Wiesenmahd aufzuspüren, und diese so vor dem Tod durch das Mähwerk zu retten. Der Prototyp basiert auf einem ferngesteuerten Multikopter, der mit mehreren Kameras ausgestattet ist und damit im Flug zuverlässiger und wesentlich schneller Wildtiere er-kennen kann, als dies mit b...

  10. Steueroptimierte Alters- und Berufsunfähigkeitsvorsorge nach dem Alterseinkünftegesetz

    OpenAIRE

    Eberhardt, Michael G.

    2007-01-01

    Eine höhere Lebenserwartung bei gleichzeitiger Überalterung der deutschen Gesellschaft sind maßgebliche Gründe eines heute bereits festzustellenden Defizits der gesetzlichen Rentenversicherung. Die jüngste Rentenreform mit dem Altersvermögens- und Alterseinkünftegesetz setzte deshalb maßgebliche Anreize, die Alterssicherung eigenverantwortlich um eine private, staatlich geförderte Vorsorge zu ergänzen. Jedoch mangelt es derzeit vorwiegend an einer fachkundigen Informations- und Beratungsleist...

  11. Zu einigen mittelalterlichen Amtsbezeichungen in der Toponymie Serbiens

    Directory of Open Access Journals (Sweden)

    Aleksandar Loma

    2015-12-01

    Full Text Available Die vorliegende Arbeit behandelt den Ortsnamen Šepšin, wie ein Dorf in Serbien unweit von Mladenovac, südlich von Belgrad, heißt. Nach dem Zeugnis der türkischen Verzeichnisse des 16. Jh.s, hat sich die heutige Form des Namens über Šemšin aus Šemčin entwickelt, wie sein Erstbeleg aus 1528 lautet. Vorausgesetzt, dass sich das anlautende Š- aus S- durch Assimilation vom Typ šiče < siče ‘zischt’ entwickelt hat, lässt sich die ursprügliche Namenform als *Sěmčijin wiederherstellen, wo sich um ein Possessivadjektiv zur altserbischen Amtsbezeichnung sěmьčija handelt. Nur als Hapax in der BanjskaUrkunde aus 1316. belegt, wird sie mit aksl. samъčii ‘praefectus’ gleichgesetzt, wo wahrscheinlich ein Lehnwort aus dem Protobulgarischen vorliegt. In diesem Fall liesse sich das ě der altserbischen Nebenform durch den Einfluss des urslav. Wortes *sěmь ‘Familie’ erklären. Anknüpfend wird die Frage nach der Herkunft eines anderen Ortsnamens aus demselben Gebiet, Hrčin, heute Vrčin, wieder in Betracht gezogen. Bisher unterschiedlich gedeutet, lässt sich er analogisch zu *Sěmčijin auf *Hrtčijin als Possessivbildung zur sonst unbelegten Hofamtsbezeichnung *xъrtьčii ‘für Windhunde (*xъrtъ zuständig, Hofjägermeister’ zurückführen. In beiden Fällen dürfte sich das maskuline Possessivadjektiv auf -in ursprünglich auf potok ‘Bach’ oder dol ‘Tal’ im Lehensbesitz der betreffenden Person bezogen haben.

  12. Coastal DEMs with Cross-Track Interferometry

    NARCIS (Netherlands)

    Greidanus, H.S.F.; Huising, E.J.; Platschorre, Y.; Bree, R.J.P. van; Halsema, D. van; Vaessen, E.M.J.

    1999-01-01

    Digital elevation models (DEMs) are produced from airborne radar cross-track interferometric measurements. Radar DEMs recorded from perpendicular orientations are intercompared, and compared to DEMs derived from airborne laser altimetry

  13. Intertextuelle und intramediale Bezüge als Orientierungsangebot – systematische Überlegungen und exemplarische Untersuchungen zu Verweisen auf das Fernsehangebot

    Directory of Open Access Journals (Sweden)

    Ben Bachmair

    2017-07-01

    Full Text Available Auch wenn das Internet sich weder so schnell noch so nachhaltig im Alltag und als Bestandteil von Massenkommunikation etablierte, wie es Ende der neunziger Jahre den Anschein hatte, so zeigt sich am Internet doch, was sich mit der Vernetzungs- und Verfügbarkeitslogik verändern könnte, die dem Internet zu eigen ist. Manuel Castells (2001 mit seiner Analyse des „Informationszeitalters“ und der als instrumentellem Netzwerk organisierten Gesellschaft skizziert die Umrisse, wie sich unsere Gesellschaft mit welcher Dynamik entwickelt. Er spricht von einer „informationeilen Entwicklungsweise“ (ebd., S. 17, die anders als die „agrarische“ oder die „industrielle“ auf das gesellschaftliche Verhältnis der Menschen zur Natur („Produktion“, zu sich selber („Erfahrung“, „kulturelle Identität“ und zu anderen (.Macht“ einwirkt. Einen Aspekt dieser „informationellen Entwicklungsweise“ beschreibt Castells mit dem Hinweis auf „globale Netzwerke der Instrumentalität“, die eine „unüberschaubare Anzahl virtueller Gemeinschaften“ hervorbringt (ebd., S. 23. Dabei konstituiert sich auch eine Art von Subjektivität, die sich im Moment als „zunehmende Distanz zwischen Globalisierung und Identität, zwischen dem Netz und dem Ich“ beschreiben lässt (ebd., S. 24. In dieser Spannung bekommt .Multimedia“ die Funktion einer „symbolischen Umwelt“ (ebd., S. 415.

  14. No Escape from the Burbs. Rezension zu Roger Keil (Hg. (2013: Suburban Constellations: Governance, Land and Infrastructure in the 21st Century. Berlin: JOVIS.

    Directory of Open Access Journals (Sweden)

    Markus Kip

    2016-11-01

    Full Text Available Den Begriff des Urbanen in Auseinandersetzung mit dem Suburbanen zu bestimmen, ist horizonterweiternd. Nicht, dass er nach der Lektüre von Suburban Constellations an Schärfe gewonnen hätte, wohl aber hat sich meine Aufmerksamkeit für scheinbar banale Phänomene außerhalb der Stadt geschärft. Neu ist die enorme Bandbreite suburbaner Fallstudien aus dem ‚Globalen Norden‘ und dem ‚Globalen Süden‘, die hier versammelt werden.Der Band ist ein wichtiger Output des Forschungsverbunds „Global Suburbanism. Governance, Land and Infrastructure in the 21st Century“, dem über fünfzig Wissenschaftler_innen und Praktiker_innen angehörenAm Ende hat mich die Hauptthese des Buches überzeugt, der zufolge suburbane Räume keine Randphänomene, sondern Schlüsselaspekte der Urbanisierung im 21. Jahrhundert darstellen.

  15. Zu einer inhaltsorientierten Theorie des Lernens und Lehrens der biologischen Evolution

    Science.gov (United States)

    Wallin, Anita

    Der Zweck dieser Studie (zwecks Überblick siehe dazu Abb. 9.1) war zu untersuchen, wie die Schüler der Sekundarstufe II ein Verständnis von der Theorie der biologischen Evolution entwickeln. Vom Ausgangspunkt "Vorurteile der Schüler“ ausgehend wurden Unterrichtssequenzen entwickelt und drei verschiedene Lernexperimente in einem zyklischen Prozess durchgeführt. Das Wissen der Schüler wurde vor, während und nach den Unterrichtssequenzen mit Hilfe von schriftlichen Tests, Interviews und Diskussionsrunden in kleinen Gruppen abgefragt. Etwa 80 % der Schüler hatten vor dem Unterricht alternative Vorstellungen von Evolution, und in dem Nachfolgetest erreichten circa 75 % ein wissenschaftliches Niveau. Die Argumentation der Schüler in den verschiedenen Tests wurde sorgfältig unter Rücksichtnahme auf Vorurteile, der konzeptionellen Struktur der Theorie der Evolution und den Zielen des Unterrichts analysiert. Daraus konnten Einsichten in solche Anforderungen an Lehren und Lernen gewonnen werden, die Herausforderungen an Schüler und Lehrer darstellen, wenn sie anfangen, evolutionäre Biologie zu lernen oder zu lehren. Ein wichtiges Ergebnis war, dass das Verständnis existierender Variation in einer Population der Schlüssel zum Verständnis von natürlicher Selektion ist. Die Ergebnisse sind in einer inhaltsorientierten Theorie zusammengefasst, welche aus drei verschiedenen Aspekten besteht: 1) den inhaltsspezifischen Aspekten, die einzigartig für jedes wissenschaftliche Feld sind; 2) den Aspekten, die die Natur der Wissenschaft betreffen; und 3) den allgemeinen Aspekten. Diese Theorie kann in neuen Experimenten getestet und weiter entwickelt werden.

  16. [Aus dem Schrifttum] / Carmen Schmidt

    Index Scriptorium Estoniae

    Schmidt, Carmen, 1956-

    1999-01-01

    Arvustus: Die selbstverwaltete Gemeinde : Beiträge zu ihrer Vergangenheit, Gegenwart und Zukunft in Estland, Deutschland und Europa / Hrsg. W. Drechsler. - Berlin, 1999. - 128 S. (Schriften zum öffentlichen Recht ; 784). Arvustus artiklite kogumikule, mis on pühendatud Lübecki linnaõiguse 750.-le aastapäevale

  17. Rezension zu: Christina Holtz-Bacha (Hg.: Frauen, Politik und Medien. Wiesbaden: VS Verlag für Sozialwissenschaften 2008

    Directory of Open Access Journals (Sweden)

    Tanja Maier

    2009-03-01

    Full Text Available In dem von Christina Holtz-Bacha herausgegebenen Sammelband wird aus einer kommunikationswissenschaftlichen Perspektive untersucht, wie Politikerinnen in höchsten politischen Ämtern medial repräsentiert werden. In den einzelnen Beiträgen wird der Frage nachgegangen, ob die zunehmende Sichtbarkeit von Politikerinnen wie Angela Merkel, Christina Kirchner oder Ségolène Royal auch zu einer veränderten medialen Berichterstattung geführt habe. Analysiert werden nicht nur die mediale Präsenz von Politikerinnen im Vergleich zu ihren männlichen Kollegen, sondern auch die Gemeinsamkeiten und Unterschiede in den textuellen und bildlichen Darstellungsweisen. Der Band liefert aus der Perspektive der politischen Kommunikationsforschung einige interessante empirische Einzelanalysen. Die theoretische Auseinandersetzung mit Konzepten der Geschlechterforschung spielt nur am Rande eine Rolle.

  18. Rezension zu: Yvonne Haffner, Beate Krais: Arbeit als Lebensform? Frankfurt am Main u.a.: Campus Verlag 2008

    Directory of Open Access Journals (Sweden)

    Daniela Heitzmann

    2009-07-01

    Full Text Available Nachdem der Mythos des unerbittlich arbeitenden Wissenschaftlers, der sich mit Haut und Haar ‚seiner‘ Forschung verschrieben hat, langsam zu bröckeln beginnt, stellt sich aus der Genderperspektive die Frage nach der Bedeutung der Arbeitskultur für die fortbestehende Unterrepräsentanz von Frauen in der Wissenschaft, besonders in leitenden Positionen. Gleichzeitig trägt die allmähliche ‚Entdeckung‘ des Privaten für Männer, die nun auch Väter und Lebenspartner sein sollen (können, zur Entmythologisierung bei. Der vorliegende Sammelband widmet sich dem Balance-Akt zwischen Arbeits- und Privatleben, den Frauen und Männer zu leisten haben. Auf Grundlage zahlreicher empirischer Untersuchungen wird ein umfassendes und erkenntnisreiches Panorama über die Verquickungen individueller und struktureller Anforderungen an berufstätige Akademikerinnen und Akademiker vorgelegt.

  19. Radar and Lidar Radar DEM

    Science.gov (United States)

    Liskovich, Diana; Simard, Marc

    2011-01-01

    Using radar and lidar data, the aim is to improve 3D rendering of terrain, including digital elevation models (DEM) and estimates of vegetation height and biomass in a variety of forest types and terrains. The 3D mapping of vegetation structure and the analysis are useful to determine the role of forest in climate change (carbon cycle), in providing habitat and as a provider of socio-economic services. This in turn will lead to potential for development of more effective land-use management. The first part of the project was to characterize the Shuttle Radar Topography Mission DEM error with respect to ICESat/GLAS point estimates of elevation. We investigated potential trends with latitude, canopy height, signal to noise ratio (SNR), number of LiDAR waveform peaks, and maximum peak width. Scatter plots were produced for each variable and were fitted with 1st and 2nd degree polynomials. Higher order trends were visually inspected through filtering with a mean and median filter. We also assessed trends in the DEM error variance. Finally, a map showing how DEM error was geographically distributed globally was created.

  20. Digitial Elevation Model (DEM) 100K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USG to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  1. Digtial Elevation Model (DEM) 250K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  2. Digital Elevation Model (DEM) 24K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  3. Philosophisch und theologisch denken (lernen. Fachdidaktische Skizzierungen zu einer ReligionslehrerInnenbildung NEU

    Directory of Open Access Journals (Sweden)

    Philipp Klutz

    2013-10-01

    Full Text Available ENGLISH: It is an essential challenge for (religious teachers to initiate successful learning at school. How teachers act in their instruction is a key factor for successful learning at school. So teacher education has to focus on the process of professionalization of teachers. The faculty of Catholic Theology at the University of Vienna realigns the courses of subject didactic. According to the course ‘Philosophisch und theologisch denken’ this paper illustrates the students’ process of professionalization. The aim of this process is to form a ‘habitus’ in which religious education at schools and subject didactic (didactic of RE is visible under a theological approach. GERMAN: Wie gelingendes Lernen an der Schule initiiert werden kann, ist eine zentrale Herausforderung von (Religions LehrerInnen. Dabei kommt der Qualität des unterrichtlichen Handelns von Lehrpersonen eine entscheidende Rolle zu. In der Ausbildungsphase von ReligionslehrerInnen gilt es, sich dem Prozess der Professionalisierung zu widmen. An der Katholisch-Theologischen Fakultät der Universität Wien wird die fachdidaktische Lehre neu ausgerichtet, die sich so den Herausforderungen des Religionslehrberufs stellt. Anhand des fachdidaktischen Seminars ‚Philosophisch und theologisch denken‘ wird der Professionalisierungsprozess von Studierenden aufgezeigt. Durch diesen soll eine Haltung (Habitus ausgebildet werden, der eine theologisch begründete Sichtweise religiöser Bildung an der Schule und somit von Fachdidaktik (Religionsdidaktik sichtbar werden lässt.

  4. Radiosurgery with the gamma knife; Radiochirurgie mit dem Gamma-Knife

    Energy Technology Data Exchange (ETDEWEB)

    Wowra, B.; Reulen, H.J.

    1996-05-10

    Radiosurgery is a novel modality introduced by the neurosurgeon Lars Leksell. For the most important lesions, (arteriovenous angiomas, benign tumors in the base of the skull, formation of metastases in the brain), radiosurgery is a valuable additional tool in the range of therapies available to the benefit of patients. The gamma knife has been gaining a leading rank in the range of therapies applied in Germany. (orig.) [Deutsch] Radiochirurgie ist ein neues, von dem Neurochirurgen Lars Leksell konzipiertes Prinzip. Bei den wichtigsten Indikationen (arteriovenoese Angiome, gutartige Tumoren der Schaedelbasis, Hirnmetastasen etc.) bereichert und ergaenzt die Radiochirurgie das therapeutische Arsenal der Neurochirurgie zum Vorteil der Patienten betraechtlich. Dem Gamma-Knife kommt jetzt auch in Deutschland ein prominenter Platz unter den verschiedenen radiochirurgischen Verfahren zu. (orig.)

  5. Auf dem Wege zu neuzeitlicher Toleranz und Gewissensfreiheit : Randbemerkungen zu Frage der (Nicht)tolerierung der Täufer in der Reformationszeit / Andres Saumets

    Index Scriptorium Estoniae

    Saumets, Andres

    2003-01-01

    Ettekanne sümpoosionilt: Gemeinsames Symposium der Evangelisch-Theologischen Fakultät der Universität Tartu, der Estnischen Studiengesellschaft für Morgenlandkunde und der Deutschen Religionsgeschichtlichen Studiengesellschaft. Tartu, 2001

  6. Alte Thesen neu gelesen: Perspektiven kritischer Stadtforschung. Kommentar zu Hartmut Häußermann & Walter Siebels „Thesen zur Soziologie der Stadt“

    Directory of Open Access Journals (Sweden)

    Carsten Keller

    2013-07-01

    Full Text Available [Dieser Artikel ist Teil einer Debatte] Der Text „Thesen zur Soziologie der Stadt“ scheint mir besonders in den abschließend formulierten Perspektiven, die Hartmut Häußermann und Walter Siebel unter der Überschrift „Aufgaben einer kritischen Soziologie der Stadt“ formulieren, nach wie vor lesenswert und aktuell zu sein. Drei Perspektiven werden hier aufgezeigt: erstens eine Wissenschafts- und Ideologiekritik, zweitens eine empirisch orientierte Zustandsbeschreibung städtischer Strukturen und von Stadtentwicklung sowie drittens eine Analyse der staatlichen Stadtpolitik. Diese drei abschließenden Perspektiven möchte ich im Folgenden kommentieren. Es wird mithin keine immanente Auseinandersetzung mit dem gesamten Text und weiteren Arbeiten der beiden Autoren angestrebt. Es hätte mich zwar durchaus gereizt, die Entwicklung der Arbeiten von Häußermann und Siebel vor dem Hintergrund dieses frühen, emphatisch formulierten Textes zu reflektieren. Vielleicht auch wegen der persönlichen Bekanntschaft mit Häußermann, den ich als Projekt- und Dissertationsbetreuer an der Humboldt-Universität kennenlernte, erschien mir eine solche Zugangsweise zu den „Thesen“ durchaus naheliegend. [...

  7. Eine polizeiliche ‚Moral‘ der Demütigung. Nebeneffekte der ‚Kriminalitätsbekämpfung‘ in einem französischen Vorort

    Directory of Open Access Journals (Sweden)

    Mélina Germes

    2014-10-01

    Full Text Available Im Anschluss an eine langfristige ethnographische Beobachtung der Arbeit einer Brigade Anti-Criminalité (Einheit zur Kriminalitätsbekämpfung; im Folgenden: BAC in einem Pariser Vorort zwischen 2005 und 2007 hat der Anthropologe Didier Fassin im Jahr 2011 das Buch La force de l'ordre. Une anthropologie de la police des quartiers veröffentlicht, das zu einem Meilenstein in der französischen Polizeiforschung geworden ist und einen wichtigen Beitrag auch zur öffentlichen Debatte geleistet hat. Diese Debatte um das Polizieren der ,Viertelʼ beschäftigt sich mit den diskursiven, organisatorischen und alltagsweltlichen Hintergründen der Polizeiarbeitum wiederholte Identitätskontrollen, ethnischen Diskriminierung und exzessiver Gewaltanwendung zu beschreiben und einzuordnen. Ziel der Untersuchung Fassins in Kontext dieser Debatte ist es, die Polizeiarbeit in den ,Viertelnʼ zu begleiten, zu hinterfragen sowie zu erklären, was diese Polizeiarbeit über die französische Gesellschaft aussagt. Der für dieses Heft von s u b \\ u r b a n übersetzte Auszug aus dem vierten Kapitel seines Buches reflektiert den Begriff von ,Gewaltʼ (zu weiteren Begriffserläuterung vgl. den Textauszug von Fassin in Bezug auf die Polizeiarbeit und unterscheidet zwischen physischer, körperlicher Gewalt und unsichtbaren Formen von psychischer und verbaler Gewalt.  

  8. Riots ‒ Anmerkungen zu Begriff und Konzept

    Directory of Open Access Journals (Sweden)

    Dieter Rucht

    2016-05-01

    Full Text Available Ausgehend von sozialwissenschaftlichen Befunden werden zunächst ältere massenpsychologische Deutungen von riots zurückgewiesen. Die überwiegende Mehrzahl der im riot Aufbegehrenden entspricht nicht dem Typus entfremdeter und verängstigter Einzeltäter_innen. Zweitens benennt der Beitrag eine Reihe von Bedingungen für das Zustandekommen von riots. Drittens wird der Begriff ‚riot‘ in formaler Hinsicht näher bestimmt und einerseits von moderateren Formen des Protests, andererseits von geplanter und organisierter Gewalt (z. B. Terrorismus abgegrenzt. Abschließend wird die Frage des politischen Gehalts von riots und deren normativen Grundlagen erörtert.

  9. Declining price difference from gas to coal provides for a new situation in the electricity market; Sinkende Preisdifferenz von Gas zu Kohle sorgt fuer neue Lage am Strommarkt

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2017-01-15

    The price difference (spread) between power coal and natural gas has increased sharply since 1999. This gap reached its peak in 2013 with 171 Euro/t SKE. In many cases, higher CO{sub 2} prices were required to promote gas use in the electricity sector. However, it has now become clear that falling gas prices lead to a growing competitiveness of natural gas. Interventions in the EU-ETS or at the national level with the aim to promote gas use in the electricity sector do not make sense and would merely reduce the competitive pressure on the gas producers and lead them to become a monopoly rents. [German] Der Preisabstand (Spread) zwischen Kraftwerkskohle und Erdgas stieg seit 1999 stark an. Dieser Gap erreichte in 2013 mit 171 Euro/t SKE seinen Hoechststand. Vielfach wurden hoehere CO{sub 2}-Preise gefordert, um den Gaseinsatz im Stromsektor zu foerdern. Doch inzwischen zeigt sich, dass fallende Gaspreise zu einer wachsenden Wettbewerbsfaehigkeit von Erdgas fuehren. Interventionen in das EU-ETS oder auf nationaler Ebene mit dem Ziel, den Gaseinsatz im Stromsektor zu foerdern, machen daher keinen Sinn und wuerden lediglich den Wettbewerbsdruck auf die Gasproduzenten mindern sowie fuer diese zu einer Monopolrente fuehren.

  10. Automated Quality Control for Ortholmages and DEMs

    DEFF Research Database (Denmark)

    Höhle, Joachim; Potucková, Marketa

    2005-01-01

    The checking of geometric accurancy of orthoimages and digital elevation models (DEMs) is discussed. As a reference, an existing orthoimage and a second orthoimage derived from an overlapping aerial image, are used. The proposed automated procedures for checking the orthoimages and DEMs are based...

  11. Der Einfluss des Country-of-Origin Effekts im Vergleich zu anderen Faktoren auf die Kaufabsicht und Markenpräferenz in der Produktgruppe PKW

    OpenAIRE

    Gerhold, Christine

    2009-01-01

    Der Konsument sieht sich im zunehmenden Maße mit einer großen Produktvielfalt, einer allgemeinen Homogenisierung der Produkte und einer ständigen Informationsüberflutung konfrontiert. Zur leichteren Orientierung werden aus dem großen Bündel an Produktinformationen, einzelne "Schlüsselinformationen", verstärkt zur Kaufentscheidung herangezogen. In der vorliegenden Arbeit wird untersucht, welche Bedeutung die Schlüsselinformation "Country-of-Origin" im Vergleich zu anderen Faktoren, wie Marke o...

  12. ArcticDEM Validation and Accuracy Assessment

    Science.gov (United States)

    Candela, S. G.; Howat, I.; Noh, M. J.; Porter, C. C.; Morin, P. J.

    2017-12-01

    ArcticDEM comprises a growing inventory Digital Elevation Models (DEMs) covering all land above 60°N. As of August, 2017, ArcticDEM had openly released 2-m resolution, individual DEM covering over 51 million km2, which includes areas of repeat coverage for change detection, as well as over 15 million km2 of 5-m resolution seamless mosaics. By the end of the project, over 80 million km2 of 2-m DEMs will be produced, averaging four repeats of the 20 million km2 Arctic landmass. ArcticDEM is produced from sub-meter resolution, stereoscopic imagery using open source software (SETSM) on the NCSA Blue Waters supercomputer. These DEMs have known biases of several meters due to errors in the sensor models generated from satellite positioning. These systematic errors are removed through three-dimensional registration to high-precision Lidar or other control datasets. ArcticDEM is registered to seasonally-subsetted ICESat elevations due its global coverage and high report accuracy ( 10 cm). The vertical accuracy of ArcticDEM is then obtained from the statistics of the fit to the ICESat point cloud, which averages -0.01 m ± 0.07 m. ICESat, however, has a relatively coarse measurement footprint ( 70 m) which may impact the precision of the registration. Further, the ICESat data predates the ArcticDEM imagery by a decade, so that temporal changes in the surface may also impact the registration. Finally, biases may exist between different the different sensors in the ArcticDEM constellation. Here we assess the accuracy of ArcticDEM and the ICESat registration through comparison to multiple high-resolution airborne lidar datasets that were acquired within one year of the imagery used in ArcticDEM. We find the ICESat dataset is performing as anticipated, introducing no systematic bias during the coregistration process, and reducing vertical errors to within the uncertainty of the airborne Lidars. Preliminary sensor comparisons show no significant difference post coregistration

  13. Estimating Coastal Digital Elevation Model (DEM) Uncertainty

    Science.gov (United States)

    Amante, C.; Mesick, S.

    2017-12-01

    Integrated bathymetric-topographic digital elevation models (DEMs) are representations of the Earth's solid surface and are fundamental to the modeling of coastal processes, including tsunami, storm surge, and sea-level rise inundation. Deviations in elevation values from the actual seabed or land surface constitute errors in DEMs, which originate from numerous sources, including: (i) the source elevation measurements (e.g., multibeam sonar, lidar), (ii) the interpolative gridding technique (e.g., spline, kriging) used to estimate elevations in areas unconstrained by source measurements, and (iii) the datum transformation used to convert bathymetric and topographic data to common vertical reference systems. The magnitude and spatial distribution of the errors from these sources are typically unknown, and the lack of knowledge regarding these errors represents the vertical uncertainty in the DEM. The National Oceanic and Atmospheric Administration (NOAA) National Centers for Environmental Information (NCEI) has developed DEMs for more than 200 coastal communities. This study presents a methodology developed at NOAA NCEI to derive accompanying uncertainty surfaces that estimate DEM errors at the individual cell-level. The development of high-resolution (1/9th arc-second), integrated bathymetric-topographic DEMs along the southwest coast of Florida serves as the case study for deriving uncertainty surfaces. The estimated uncertainty can then be propagated into the modeling of coastal processes that utilize DEMs. Incorporating the uncertainty produces more reliable modeling results, and in turn, better-informed coastal management decisions.

  14. Druckausgleich im außenpolitischen Umfeld der ASEAN: Auf dem Langen Marsch von ASEAN+1 zu ASEAN+6?

    OpenAIRE

    Weggel, Oskar

    2006-01-01

    The nineties of the last century began as an agreeable time for the three Indochina states, at least as far as foreign policy and the options for joining subregional and regional FTAs were concerned. After China had succeeded in getting leverage on the ASEAN however, they became more and more squeezed into the Chinese corner, particularly after having signed the China-ASEAN FTA (CAFTA) Agreement with Beijing in November 2002. Soon afterwards not only the volume of trade, but al...

  15. Nationale und transnationale Vernetzung polnischer Städte und Regionen: Auf dem Weg zu einer nachhaltigen Stadt- und Regionalentwicklung

    OpenAIRE

    Dorsch, Pamela

    2003-01-01

    "Die Studie 'Nationale und transnationale Vernetzung polnischer Städte und Regionen - Bedeutung für eine nachhaltige Stadt- und Regionalentwicklung' liefert einen Überblick über die Einbindung polnischer Kommunen und Wojewodschaften in allgemeine und politikfeldspezifische Netzwerke auf nationaler und transnationaler Ebene. Besondere Berücksichtigung findet hierbei die Vernetzung in Fragen von Nachhaltigkeit und des Umweltschutzes. Einführend zeigt die Studie den Prozess zunehmender Dezentral...

  16. The water framework directive. On the way to good waters; Die Wasserrahmenrichtlinie. Auf dem Weg zu guten Gewaessern

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Sandra; Voelker, Jeanette [Helmholtz-Zentrum fuer Umweltforschung - UFZ (Germany)

    2010-05-15

    The aim of the water framework directive of the European Union is a good quality of for all European waters. The brochure under consideration informs on targets and contents of the water framework directive and its meaning in water-economical practice. The contribution summarizes the facts and results of management planning in Germany and describes the most important planning steps and their statements. The implementation of a totally integrated management of river basins for the protection of our waters is described. The brochure obtains a country wide overview of the current condition of waters.

  17. Urban DEM generation, analysis and enhancements using TanDEM-X

    Science.gov (United States)

    Rossi, Cristian; Gernhardt, Stefan

    2013-11-01

    This paper analyzes the potential of the TanDEM-X mission for the generation of urban Digital Elevation Models (DEMs). The high resolution of the sensors and the absence of temporal decorrelation are exploited. The interferometric chain and the problems encountered for correct mapping of urban areas are analyzed first. The operational Integrated TanDEM-X Processor (ITP) algorithms are taken as reference. The ITP main product is called the raw DEM. Whereas the ITP coregistration stage is demonstrated to be robust enough, large improvements in the raw DEM such as fewer percentages of phase unwrapping errors, can be obtained by using adaptive fringe filters instead of the conventional ones in the interferogram generation stage. The shape of the raw DEM in the layover area is also shown and determined to be regular for buildings with vertical walls. Generally, in the presence of layover, the raw DEM exhibits a height ramp, resulting in a height underestimation for the affected structure. Examples provided confirm the theoretical background. The focus is centered on high resolution DEMs produced using spotlight acquisitions. In particular, a raw DEM over Berlin (Germany) with a 2.5 m raster is generated and validated. For this purpose, ITP is modified in its interferogram generation stage by adopting the Intensity Driven Adaptive Neighbourhood (IDAN) algorithm. The height Root Mean Square Error (RMSE) between the raw DEM and a reference is about 8 m for the two classes defining the urban DEM: structures and non-structures. The result can be further improved for the structure class using a DEM generated with Persistent Scatterer Interferometry. A DEM fusion is thus proposed and a drop of about 20% in the RMSE is reported.

  18. Dewatering of sludge using the hydrosoft high-pressure process; Entwaessern von Schlaemmen mit dem Hydrosoft-Hochdruckverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Eder, C.; Eder, G. [Christian Eder Technology GbR, Neunkirchen (Germany)

    1999-07-01

    The hydrosoft process permits to dewater sludge, especially also sludge from municipal sewage treatment plant, until it contains a high proportion of dry substance. For existing dewatering systems equipped with the long-lived chamber filter presses, too, the dry matter content of the filter cake can be substantially increased using the hydrosoft process; only the pump system must be retrofitted. As a preliminary measure, tests with mobile pilot plants should be carried out. (orig.) [German] Mit dem Hydrosoft-Verfahren besteht die Moeglichkeit Schlaemme, insbesondere auch Schlaemme aus kommunalen Klaeranlagen, auf hohe Trockensubstanz-Gehalte zu entwaessern. Auch bei bestehenden Entwaesserungsanlagen, die mit den langlebigen Kammerfilterpressen ausgeruestet sind, koennen die Trockensubstanzgehalte der Filterkuchen mit dem Hydrosoft-Verfahren, fuer das dann nur noch das Pumpsystem nachgeruestet werden muss, wesentlich angehoben werden. Vorausgehen sollten jeweils Vorversuche mit mobilen Versuchsanlagen. (orig.)

  19. 2014 USACE NCMP Topobathy Lidar DEM: Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  20. 2016 USGS Lidar DEM: Maine QL2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Product: These are Digital Elevation Model (DEM) data for Franklin, Oxford, Piscataquis, and Somerset Counties, Maine as part of the required deliverables for the...

  1. Eine Analyse des Zusammenhangs zwischen dem Konsum von Alkopops und dem Problemverhalten von Jugendlichen

    OpenAIRE

    Metzner, Cornelia Beate Isabel

    2007-01-01

    Zielsetzung: In dieser Arbeit wird untersucht, ob bei Jugendlichen ein Zusammenhang zwischen dem Konsum von Alkopops einerseits und dem sonstigen Alkoholtrinkverhalten, dem Konsum von Zigaretten und illegalen Drogen sowie weiteren Risikoverhaltensweisen andererseits besteht, ferner ob sich Unterschiede im Verhalten von Jungen und Mädchen ergeben. Theoretischer und empirischer Hintergrund: �Alkopops�, d. h. Mischgetränke diverser Hersteller aus Likör bzw. Schnaps und Limonade sowie wein- ...

  2. Die Erforschung kollektiver und individueller Dynamik – Zu einer historisch und prozess-soziologisch orientierten interpretativen Sozialforschung

    Directory of Open Access Journals (Sweden)

    Gabriele Rosenthal

    2016-04-01

    Full Text Available In diesem Beitrag konzentriere ich mich auf die Vorteile einer konsequent durchgeführten interpretativen oder rekonstruktiven Sozialforschung gegenüber anderen qualitativen Verfahren und verdeutliche, inwiefern wir diese Vorteile noch konsequenter verfolgen können als bisher. Dabei stellen sich die folgenden Fragen: Was können wir mit wenigen, aber aufwendigen Fallrekonstruktionen mit dem Ziel einer "theoretischen Verallgemeinerung" am Einzelfall im Unterschied zu qualitativen Verfahren mit umfangreichen Stichproben leisten, die eher eine numerische oder quantitative Verallgemeinerung zum Ziel haben? Inwiefern kommen wir damit überhaupt zu "allgemeinen" Aussagen über die soziale (kollektive und individuelle Wirklichkeit, über eine bestimmte Gruppierung, Organisation oder Ortsgemeinde, einen kollektiver Konflikt, ein bestimmtes Milieu oder soziales Netzwerk? Bei der Behandlung dieser Fragen geht es mir vor allem um ein Plädoyer für eine methodisch stärker historisch und prozess-soziologisch orientierte interpretative Sozialforschung. M.E. liegen in einer konsequenten Rekonstruktion der Verläufe und Wandlungsprozesse von einzelnen "Fällen" und ihrer Verflechtungen mit anderen "Fällen" die Chancen für eine wirklich empirisch geerdete Theorieentwicklung. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1602139

  3. Landbrugets trædemølle

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2016-01-01

    Teorien om landbrugets trædemølle siger, at teknologi medfører stigende produktivitet, stigende udbud og dermed faldende priser. Dermed øges behovet for ny teknologi. Det vedvarende teknologipres gavner de innovative landmænd, mens de mere afventende landmænd kun oplever de negative virkninger i...... form af prisfald. I denne artikel beskrives nærmere de enkelte elementer i trædemøllen. Samtidig vurderes trædemøllens betydning og mulige påvirkning. Det konkluderes, at trædemøllen, dens forudsætninger og afledte virkninger stadig er fuldt gældende. Det er ikke muligt for et enkelt land eller region...... af bremse trædemøllen på lang sigt. På lokalt plan kan man løse nogle sociale og økonomiske problemer skabt af trædemøllen gennem nemmere afvandring....

  4. Sind gesetze (noch immer zu hoch aufgehängt?

    Directory of Open Access Journals (Sweden)

    Ada Gruntar Jermol

    2015-08-01

    Full Text Available Es braucht nicht besonders betont zu werden, dass Gesetze für den fachlichen Laien eine rätselhafte undfast unverständliche Lektüre darstellen. Im vorliegenden Beitrag wird versucht, deutlich zu machen, warum - bildlich gesprochen - Gesetze zu hoch aufgehängt sind; oder mit anderen Worten: worauf die meisten Verständnisschwierigkeiten von Gesetzestexten zurückzuführen sind. Wurzelt die Unverstäindlichkeit von Gesetzen in ihrer sprachlichen Beschaffenheit (die Stilthese oder in der mangelnden Referenz auf die betreffenden Bezugssysteme (die Wissensthese? Die einleitende Diskussion sei mit einem Zitat Els Oksaars (1988, 185 eröffnet: Vor mehr als zweitausend Jahren liess der Tyrann Dionysios von Syrakus die Gesetze so hoch aufhängen, dass sie kein Bfuger lesen konnte. Hegel vergleicht in seiner Rechtsphilosophie dieses Umecht mit der Tatsache, dass das Recht seiner Gestalt nach nur denen zugänglich gemacht wird, die sich - wie er es ausdrückt - gelehrt darauflegen. Heute kannjeder Bürger, wenn er will, alle Gesetze lesen, es scheint jedoch, dass sich seit Dionysios im Prinzip nicht viel geändert hat: sind nicht Gesetze auch heute noch zu hoch aufgehängt, und zwar auf der Abstraktions- und Begriffsleiter der Sprache?

  5. Geschlecht zwischen Körper und Konstruktion: Aktuelle Impulse zu einer langen Debatte Between Bodies and Constructions: Current Takes on a Long-Standing Debate

    Directory of Open Access Journals (Sweden)

    Natascha Gruber

    2002-11-01

    Full Text Available Die mit dem Erscheinen von Judith Butlers Unbehagen der Geschlechter ausgelöste „Essentialismus versus Konstruktivismus“-Debatte um die Frage, wie Materialität und Körper zu denken sei, hält die Geschlechterforschung bis heute in dilemmatischer Spannung. Kann auf die Kategorie Geschlecht überhaupt verzichtet werden? Der Sammelband Verhandlungen des Geschlechts dokumentiert anhand von 15 Beiträgen aus den Bereichen Kulturwissenschaften, Philosophie, Psychoanalyse und Politik die aktuelle Entwicklung der Debatte rund um den an Butler orientierten feministischen Konstruktionsbegriff. Unter Rückgriff auf unterschiedliche Ansätze wird versucht, zwischen „Körper“ und „Diskurs“ zu vermitteln und Materialität neu zu denken.The “essentialism-versus-constructivism” debate which was sparked by Butler’s work, Gender Trouble, a debate centered around the question how to best think about materiality and bodies, continues to be relevant to gender studies to the present day. Is it at all possible to avoid gender as a category? 15 essays from scholars in cultural studies, philosophy, psycho-analysis, and politics document the current development of the debates that were inspired by Butler’s ideas about feminist constructions. Using a variety of different approaches, the authors attempt to mediate between the concepts of “body” and “discourse” and to conceive of materiality in a new way.

  6. Fracture assessment of laser welde joints using numerical crack propagation simulation with a cohesive zone model; Bruchmechanische Bewertung von Laserschweissverbindungen durch numerische Rissfortschrittsimulation mit dem Kohaesivzonenmodell

    Energy Technology Data Exchange (ETDEWEB)

    Scheider, I.

    2001-07-01

    This thesis introduces a concept for fracture mechanical assessment of structures with heterogenuous material properties like weldments. It is based on the cohesive zone model for numerical crack propagation analysis. With that model the failure of examined structures due to fracture can be determined. One part of the thesis contains the extension of the capabilities of the cohesive zone model regarding modelling threedimensional problems, shear fracture and unloading. In a second part new methods are developed for determination of elastic-plastic and fracture mechanical material properties, resp., which are based on optical determination of the specimen deformation. The whole concept has been used successfully for the numerical simulation of small laser welded specimens. (orig.) [German] In der vorliegenden Arbeit wird ein Konzept vorgestellt, mit dem es moeglich ist, Bauteile mit heterogenen Materialeigenschaften, wie z.B. Schweissverbindungen, bruchmechanisch zu bewerten. Es basiert auf einem Modell zur numerischen Rissfortschrittsimulation, dem Kohaesivzonenmodell, um das Versagen des zu untersuchenden Bauteils infolge von Bruch zu bestimmen. Ein Teil der Arbeit umfasst die Weiterentwicklung des Kohaesivzonenmodells zur Vorhersage des Bauteilversagens in Bezug auf die Behandlung dreidimensionaler Probleme, Scherbuch und Entlastung. In einem zweiten Teil werden Methoden zur Bestimmung sowohl der elastischplastischen als auch der bruchmechanischen Materialparameter entwickelt, die zum grossen Teil auf optischen Auswertungsmethoden der Deformationen beruhen. Das geschlossene Konzept wird erfolgreich auf lasergeschweisste Kleinproben angewendet. (orig.)

  7. Large Scale Landform Mapping Using Lidar DEM

    Directory of Open Access Journals (Sweden)

    Türkay Gökgöz

    2015-08-01

    Full Text Available In this study, LIDAR DEM data was used to obtain a primary landform map in accordance with a well-known methodology. This primary landform map was generalized using the Focal Statistics tool (Majority, considering the minimum area condition in cartographic generalization in order to obtain landform maps at 1:1000 and 1:5000 scales. Both the primary and the generalized landform maps were verified visually with hillshaded DEM and an orthophoto. As a result, these maps provide satisfactory visuals of the landforms. In order to show the effect of generalization, the area of each landform in both the primary and the generalized maps was computed. Consequently, landform maps at large scales could be obtained with the proposed methodology, including generalization using LIDAR DEM.

  8. Essay (with abstract in English Drei Avantgarde-Strömungen des heutigen US-Geisteslebens – und ihre Beziehung zu Europa

    Directory of Open Access Journals (Sweden)

    Roland Benedikter

    2006-12-01

    Full Text Available Die heutigen USA gelten vielen als Vorreiter auf dem Weg zur integrativen Erneuerung von Wissenschafts- und Erkenntnisparadigmen. Dies vor allem im Bereich der traditionellen Kern- und Grundlagen-Wissenschaft der neuzeitlichen Universität: der Philosophie und der historisch aus ihr erwachsenen Psychologien. Seit einigen Jahren ist in den USA in der Tat eine Entwicklung im Gang, welche die Einseitigkeiten des nominalistisch-subjektivistischen Paradigmas der „Postmoderne“, welches aus ideengeschichtlicher Sicht die Epoche zwischen 1979 und 2001 geprägt hat, um einen neuen geistigen Objektivismus ausgleichen und beide zu einem neuen, „subjektiv-objektiven“ Paradigma integrieren will. Diese Entwicklung findet ihren Ausdruck in drei exemplarischen Avantgarde-Strömungen, die im vorliegenden Beitrag vorgestellt sowie auf Charakteristiken und Wechselbeziehungen untersucht werden. Dabei erweist sich, dass die heutige ideengeschichtliche Avantgarde der USA in Kernterminologie, historischer Kontinuität und Ausrichtung stark pazifisch-asiatisch, aber noch zu wenig atlantisch-europäisch geprägt ist. Das scheint mit ein Grund dafür zu sein, warum diese Avantgarde-Ansätze trotz ihres hochwertigen Anregungs- und Innovations-Potentials im Hinblick auf ein ganzheitliches Wissenschafts-Paradigma für das 21. Jahrhundert noch unübersehbare Schwierigkeiten haben, den atlantisch-europäisch geprägten Hauptstrom des Geistes-, Kultur- und politisch-sozialen Lebens ihrer Gesellschaft zu erreichen. Es zeigt sich, dass der innere Ausgleich zwischen pazifischen und atlantischen Ideen-Einflüssen eine der zentralen Herausforderungen für diese Avantgarde-Strömungen, aber darüber hinaus im Spiegelverhältnis auch für das europäische Kultur- und Gesellschafts-Paradigma sowie für die Entwicklung der integralen Bewegungen auf Weltebene insgesamt ist.

  9. Open Access für Forschung und Kultur: Die Staatsbibliothek zu Berlin unterstützt den offenen Zugang zu wissenschaftlichem Wissen

    OpenAIRE

    Staatsbibliothek zu Berlin

    2017-01-01

    Seit ihrer Gründung im Jahr 1661 ist die Staatsbibliothek zu Berlin (SBB) für die Öffentlichkeit zugänglich. In dieser Tradition sowie im Bewusstsein ihrer besonderen historischen Verantwortung steht die SBB zu ihrer Verpflichtung, wissenschaftliches Wissen der Gesellschaft unbeschränkt und gleichberechtigt zur Verfügung zu stellen. Als Einrichtung der Stiftung Preußischer Kulturbesitz hat sie die Berliner Erklärung über den offenen Zugang zu wissenschaftlichem Wissen unterzeichnet. Deren Zie...

  10. Open Access für Forschung und Kultur: Die Staatsbibliothek zu Berlin unterstützt den offenen Zugang zu wissenschaftlichem Wissen

    OpenAIRE

    Staatsbibliothek zu Berlin

    2016-01-01

    Seit ihrer Gründung im Jahr 1661 ist die Staatsbibliothek zu Berlin (SBB) für die Öffentlichkeit zugänglich. In dieser Tradition sowie im Bewusstsein ihrer besonderen historischen Verantwortung steht die SBB zu ihrer Verpflichtung, wissenschaftliches Wissen der Gesellschaft unbeschränkt und gleichberechtigt zur Verfügung zu stellen. Als Einrichtung der Stiftung Preußischer Kulturbesitz hat sie die Berliner Erklärung über den offenen Zugang zu wissenschaftlichem Wissen unterzeichnet. Deren Zie...

  11. Customer Confusion: Wie Produktvielfalt dem Unternehmen schaden kann

    OpenAIRE

    Kuester, Sabine; Buys, Sebastian

    2009-01-01

    In einer von starkem Wettbewerb gekennzeichneten Umwelt müssen Unternehmen ihr Produktportfolio positiv von ihren Wettbewerbern differenzieren, um langfristig erfolgreich zu sein. Das Festlegen der einzelnen Produktliniengrößen ist dabei eine besonders kritische Herausforderung. Auf der einen Seite ist es wichtig, Produktvielfalt zu bieten, um die Bedürfnisse verschiedener Kundensegmente zu erfüllen. Auf der anderen Seite laufen U...

  12. Aussteigen aus dem Rechtsextremismus: Foto-Praxis, bildwissenschaftliche Analyse und Ausstellungsarbeit als Methoden individueller Reflexion und des wissenschaftlichen und (sozialpädagogischen Kompetenzerwerbs

    Directory of Open Access Journals (Sweden)

    Ulrike Pilarczyk

    2013-06-01

    Full Text Available Der Beitrag zeigt die medienpädagogischen und bildwissenschaftlichen Dimensionen eines zeitlich und thematisch gestaffelten Projektes auf. Ausgangspunkt war das in den Jahren 2009/10 von der Organisation EXIT-Deutschland in Berlin mit Aussteigern/-innen aus der rechtsextremen Szene initiierte Fotoprojekt «Lebensbilder». Die im Rahmen biografisch orientierter, medien- und sozialpädagogischer Fallarbeit entstandenen Fotos wurden als Prozess individueller Bilderzeugung und als Mittel zur Reflexion der jeweiligen Lebenssituation der Aussteiger(innen verstanden und eingesetzt. Eine Ausstellung schloss diese erste Phase des hier beschriebenen Projektes ab. Dem Wunsch folgend, die praktischen Erfahrungen aus der Arbeit mit Fotos wissenschaftlich überprüfen zu lassen, wurden in den Jahren 2011 und 2012 mit Studierenden am erziehungswissenschaftlichen Institut der TU Braunschweig die «Lebensbilder» zunächst einer wissenschaftlichen Bildanalyse unterzogen und anschliessend in einem gestalterisch-interpretativen Projekt durch die Studierenden zu einer Ausstellung weiterentwickelt.

  13. ASTER Orthorectified Digital Elevation Model (DEM) V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The ASTER L3 DEM and Orthorectified Images form a multi-file product that contains both the Digital Elevation Model (DEM), and the Orthorectified Image products....

  14. Massenmedien und Versöhnung: Die Berichterstattung über den deutsch-französischen Friedensprozeß nach dem 2. Weltkrieg

    Directory of Open Access Journals (Sweden)

    Susanne Jaeger

    2003-10-01

    Full Text Available Der vorliegende Beitrag beinhaltet die ersten Ergebnisse einer Langzeitstudie, bei der flächendeckend die deutsche Nachkriegsberichterstattung über Frankreich von 1946 bis 1970 inhaltsanalytisch ausgewertet wurde. Die Studie stützt sich dabei auf das Modell der Nachrichtenfaktoren von Johan Galtung, welche nach seiner Ansicht die Auswahl der Themen bestimmen, die zu einer Nachricht werden. Genau in diesen Selektionsroutinen liegt jedoch die implizite Gefahr, Konflikte zu vertiefen statt sie einzudämmen bzw. durch ein breites Verständnis der Hintergründe gewaltfrei bearbeitbar zu machen. Für die Zeit nach einem Krieg könnten sie Hindernisse auf dem Weg zur Annäherung und Aussöhnung ehemaliger Gegner darstellen. Wie jedoch sieht die Berichterstattung nach dem Krieg tatsächlich aus? Zeigen Massenmedien Bereitschaft zu einer veränderten Berichterstattung? Der Fall der französisch-deutschen Aussöhnung, welcher als Beispiel für einen gelungenen Aussöhnungsprozess gelten kann, belegt, dass Friedensprozesse von den Medien durchaus adäquat begleitet werden können: Z.B. ist der Anteil "positiver" Themen bzw. Berichterstattung konsistent höher als der "negativer", und der Anteil von Non-Elite-Themen steigt an und kündet von Interesse an französischer Lebensart und Kultur. Die Ergebnisse zeigen, dass Negativismus in den Medien kein Naturgesetz ist, sondern überwunden werden kann, wenn Frieden und Versöhnung auf der Tagesordnung stehen.

  15. Auf dem Weg zur Digitalen Bibliothek

    OpenAIRE

    Degkwitz, Andreas; Frank, Nina; Hendrix, Imma; Pfeifenberger, Regina; Tollkühn, Katharina

    2013-01-01

    Nichts hat den Lebensalltag in den vergangenen zwanzig Jahren mehr verändert als das Internet, das uns mit Handys, Laptops, Net- und Notebooks, Smartphones und Tablet-PCs allgegenwärtig begleitet. Das iPhone bietet den permanenten Zugang zu weltweit verfügbarer Information in der Westentasche und hat damit einen völlig neuen Umgang mit Interaktion und Informationsrecherche herbeigeführt. Der tief greifende Wandel hat sich massiv auf die Weiterentwicklung der Serviceprofile wissenschaftl...

  16. Rezension zu: Sabine Hark, Paula-Irene Villa (Hg.: Anti-Genderismus. Sexualität und Geschlecht als Schauplätze aktueller politischer Auseinandersetzungen. Bielefeld: transcript Verlag 2015.

    Directory of Open Access Journals (Sweden)

    Christian Hammermann

    2017-05-01

    Full Text Available Der von Sabine Hark und Paula-Irene Villa herausgegebene Sammelband analysiert die öffentlichen Angriffe auf Gender Studies und Gender Mainstreaming, die unter dem Begriff Anti-Genderismus auftreten und verhandelt werden. Die einzelnen Beiträge untersuchen Themen und Methoden des anti-genderistischen Diskurses, seine Akteur_Innen und gesellschaftlichen Bedingung. Dabei entwerfen sie ein sehr kohärentes Porträt dieser Politiken, das allerdings von einer weiteren Untersuchung der gesellschaftlichen Bedingungen und intersektionalen Bezüge zu anderen Ressentiments profitieren würde.

  17. The role of DEM at CERN

    CERN Document Server

    Van der Bij, E

    2005-01-01

    The DEM group in the Technical Support department provides services for the fabrication of special printed circuits that are invaluable for the whole particle physics community. The capability is based around a core technology that is developed by using skills to etch and process materials that are not commonly used in industry, combined with production methods used in PCB manufacturing. The role of the prototyping facilities is to assist engineers and physicists and to offer them easy access to competencies often not available from industry. At the same time, with the expertise and production capacity available, it makes that CERN is always geared up to handle emergency situations. The design office and the assembly workshop that are also part of DEM have similar roles that lower the cost and improve the quality and maintainability of electronics developed at CERN.

  18. "Un'artefice cristiano" : Studien zu Lavinia Fontana als Historienmalerin

    OpenAIRE

    Schmidt, Sandra

    2015-01-01

    Lavinia Fontana (1552-1614) war die erste Frau, die den Beruf der Malerin professionell ausübte und sich bereits zu Lebzeiten eine beeindruckende Reputation erarbeitete. In den Quellen wird sie als „Pittora singolare tra le donne” bezeichnet und in der Tat konnte sie aufgrund ihrer zahlreichen Aufträge und Erfolge von der Kunst leben und ihre Familie ernähren, was im 16. Jahrhundert außergewöhnlich war. Auch ihr Œuvre ist ungewöhnlich umfangreich. Lavinia Fontana hinterließ ein Gesamtwerk ...

  19. Kurz zum Klima: Zu viel Salz verdirbt den Boden

    OpenAIRE

    Zimmer, Markus; Lippelt, Jana; Frank, Jonas

    2012-01-01

    Der zunehmende Einsatz von Anlagen zur Bewässerung sowie mangelnde Erfahrungswerte und Unkenntnis über den richtigen Einsatz der künstlichen Bewässerung haben in den letzten Jahrzehnten zu einer massiven Zunahme der Versalzung des Bodens geführt. Durch diese Bodenversalzung werden weite Flächen für die Landwirtschaft unbrauchbar. Sie sind nur durch hohen Aufwand und Kosten wieder renaturierbar. Der Beitrag in der Reihe »Kurz zum Klima« gibt einen Überblick über die Versalzung in Anbaugebiet...

  20. Volcanic geomorphology using TanDEM-X

    Science.gov (United States)

    Poland, Michael; Kubanek, Julia

    2016-04-01

    Topography is perhaps the most fundamental dataset for any volcano, yet is surprisingly difficult to collect, especially during the course of an eruption. For example, photogrammetry and lidar are time-intensive and often expensive, and they cannot be employed when the surface is obscured by clouds. Ground-based surveys can operate in poor weather but have poor spatial resolution and may expose personnel to hazardous conditions. Repeat passes of synthetic aperture radar (SAR) data provide excellent spatial resolution, but topography in areas of surface change (from vegetation swaying in the wind to physical changes in the landscape) between radar passes cannot be imaged. The German Space Agency's TanDEM-X satellite system, however, solves this issue by simultaneously acquiring SAR data of the surface using a pair of orbiting satellites, thereby removing temporal change as a complicating factor in SAR-based topographic mapping. TanDEM-X measurements have demonstrated exceptional value in mapping the topography of volcanic environments in as-yet limited applications. The data provide excellent resolution (down to ~3-m pixel size) and are useful for updating topographic data at volcanoes where surface change has occurred since the most recent topographic dataset was collected. Such data can be used for applications ranging from correcting radar interferograms for topography, to modeling flow pathways in support of hazards mitigation. The most valuable contributions, however, relate to calculating volume changes related to eruptive activity. For example, limited datasets have provided critical measurements of lava dome growth and collapse at volcanoes including Merapi (Indonesia), Colima (Mexico), and Soufriere Hills (Montserrat), and of basaltic lava flow emplacement at Tolbachik (Kamchatka), Etna (Italy), and Kīlauea (Hawai`i). With topographic data spanning an eruption, it is possible to calculate eruption rates - information that might not otherwise be available

  1. Zu den Ursachen des mangelnden Erfolges der Honorarberatung

    OpenAIRE

    Trott, Thomas; Thießen, Friedrich

    2014-01-01

    Die Honorarberatung befindet sich überall in Europa auf dem Vormarsch. Sie ist eine von Regulierern geschätzte Alternative zur viel kritisierten Provisionsberatung. Im Widerspruch dazu verhalten sich Bankkunden zurückhaltend bis ablehnend. Dies wirft die Frage auf, worin die Ursachen liegen könnten. Mögliche Antworten werden auf Basis einer Choice-Based Conjoint-Analyse mit Kundenclusterung abgeleitet. Es zeigt sich, dass die Bankkunden gespalten sind. Eine kleine Gruppe von agilen, gut infor...

  2. Mediengestaltung im interkulturellen Vergleich. Eine Studie zu Mikroaspekten der Globalisierung

    OpenAIRE

    Vera-Stahl, Gilda

    2017-01-01

    Die vorliegende Arbeit befasst sich mit dem interkulturellen Vergleich von lokalen Werbespots aus Deutschland und Ecuador. Im Zentrum des Interesses steht die implizite Dimension der technisch gebundenen audiovisuellen Kommunikation, d.h. die Art und Weise, wie die Kommunikationsmedien – das Bild, die Sprache und die Musik – bei der Gestaltung der Spots verwendet werden. Ausgangspunkt der Untersuchung bildet der Ansatz von Nothnagel/Vera (2004, 2005), dass Habitusformen der Face-to-Face-...

  3. Extraprostatische Expansion des Prostatakarzinoms und seine Beziehung zu den Resektionsrändern bei der radikalen Prostatektomie aus Sicht des Pathologen

    Directory of Open Access Journals (Sweden)

    Noll P

    2008-01-01

    Full Text Available Das Prostatakarzinom stellt heute in der westlichen Welt das am häufigsten diagnostizierte Karzinom beim Mann dar. Entsprechend dieser Häufigkeit werden zunehmend radikale Prostatektomien durchgeführt. Die histologische Aufarbeitung des Operationspräparates liefert dem Urologen die wichtigsten Prognosefaktoren des Prostatakarzinoms. Hierbei besteht ein enger Zusammenhang zwischen der extraprostatischen Ausdehnung des Tumors und seiner Beziehung zu den Resektionsrändern. Anhand einer eigenen Untersuchung an 200 radikal operierten Prostatakarzinomen konnte gezeigt werden, dass hierbei die Lokalisation, der Malignitätsgrad und die Größe des Tumors entscheidende Bedeutung haben. Die Ermittlung dieser Parameter ist abhängig von einer standardisierten Untersuchungstechnik auf der Grundlage einer vollständigen histologischen Aufarbeitung der Prostata.

  4. Ein Paradigma, das es weiter zu konkretisieren gilt. Der Begriff der Mediatisierung bei Krotz

    Directory of Open Access Journals (Sweden)

    Hans-Dieter Kübler

    2010-01-01

    Full Text Available Rezension zu: Krotz, Friedrich. 2007. Mediatisierung: Fallstudien zum Wandel von Kommunikation. 1. Aufl. Medien - Kultur - Kommunikation. Wiesbaden: VS Verlag für Sozialwissenschaften.

  5. Interkulturelle kommunikative Kompetenz – ein Versuch der Operationalisierung aus dem Fach Deutsch an der dänischen Lehrerausbildung

    DEFF Research Database (Denmark)

    Bjerre, Kirsten; Daryai-Hansen, Petra

    2017-01-01

    Mit diesem Artikel versuchen wir, den Begriff 'interkulturelle kommunikative Kompetenz‘ theoretisch zu entwickeln. Wir gehen zunächst der Frage nach, warum im Fach Deutsch als Fremdsprache mit interkultureller kommunikativer Kompetenz gearbeitet werden sollte und welche Herausforderungen sich...... hierbei stellen. Im Anschluss präsentieren wir unser Modell der interkulturellen kommunikativen Kompetenz, das wir für das Fach Deutsch ain der dänischen Lehrerausbildung auf der Grundlage eines Modells von Michael Byram aus dem Jahre 1997 entwickelt haben. Byrams Modell der interkulturellen...... zunächst die Begriffe ‚Kompetenz‘, ‚Kultur‘, ‚kommunikative Kompetenz‘ und ‚interkulturelle Kompetenz‘. Wir konkretisieren die Dimensionen des Modells im Anschluss anhand eines Unterrichtsbeispiels für das Fach Deutsch an der dänischen Einheitsschule („Folkeskole“). Abschließend skizzieren wir, wie unser...

  6. Operating experience for a closed-circuit interconnected system for flue gas desulphurization at Klingenberg heating power station; Betriebserfahrungen zu einem Kreislaufverbundsystem fuer die Rauchgasentschwefelung im Heizkraftwerk Klingenberg

    Energy Technology Data Exchange (ETDEWEB)

    Hultsch, T [Berliner Kraft- und Licht (BEWAG)-AG, Heizkraftwerk Klingenberg, Berlin (Germany); Mueller, U [BDAG Balcke-Duerr AG, Ratingen (Germany)

    1995-05-01

    The cleaning of flue gases imposes extreme demands on the material concerned. By keeping below the acid dewpoint, this leads to condensation of acid products on the heating surfaces. The correct selection of the appropriate material is decisive for the availability of the overall plant. In the case of the application described in this paper, it has been possible to show that nickel-based alloys are outstandingly suitable for withstanding those kinds of stresses over many years. However, independently of this, it is valid to test material selection for each individual case of application. (orig.) [Deutsch] Die Reinigung von Rauchgasen stellt extreme Anforderungen an den jeweiligen Werkstoff. Durch die Unterschreitung des Saeuretaupunktes kommt es dabei zu einer Kondensation der Saeureprodukte auf den Heizflaechen. Die Auswahl des geeigneten Materials ist entscheidend fuer die Verfuegbarkeit der Gesamtanlage. In dem hier dargestellten Anwendungsfall konnte gezeigt werden, dass Nickelbasis-Legierungen hervorragend geeignet sind, einer derartigen Beanspruchung ueber Jahre hinaus standzuhalten. Unabhaengig hiervon gilt es jedoch, fuer die Materialauswahl jeden Anwendungsfall einzeln zu pruefen. (orig.)

  7. Recent developments in the electricity generation market in 2014; Aktuelle Entwicklungen auf dem Stromerzeugungsmarkt im Jahr 2014

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, Holger [Oppenhoff und Partner Rechtsanwaelte Steuerberater mbB, Koeln (Germany)

    2015-02-16

    europaeischer Ebene. Zu grosser Unsicherheit bei Anlagenbetreibern, Investoren und Unternehmen im deutschen Energieerzeugungsmarkt hat neben dem genannten Gesetzespaket die Ueberarbeitung der EU-Umwelt- und Energiebeihilfeleitlinien, das Beihilfeverfahren der Europaeischen Kommission in Bezug auf die deutsche Foerderung der Stromerzeugung aus erneuerbaren Energien und das Verfahren im Fall Aalands Vindkraft vor dem EuGH gefuehrt. Auch die Dynamik auf der Erzeugerseite, u.a. durch den vermehrten Anschluss von dezentralen Erzeugeranlagen, hat fuer eine zunehmende Regulierung bei der Stromerzeugung gesorgt. Schliesslich ist ein erster Gesetzentwurf zum Fracking Ende 2014 veroeffentlicht worden.

  8. DEM Calibration Approach: design of experiment

    Science.gov (United States)

    Boikov, A. V.; Savelev, R. V.; Payor, V. A.

    2018-05-01

    The problem of DEM models calibration is considered in the article. It is proposed to divide models input parameters into those that require iterative calibration and those that are recommended to measure directly. A new method for model calibration based on the design of the experiment for iteratively calibrated parameters is proposed. The experiment is conducted using a specially designed stand. The results are processed with technical vision algorithms. Approximating functions are obtained and the error of the implemented software and hardware complex is estimated. The prospects of the obtained results are discussed.

  9. Rezension zu: Sheila Jeffreys: The Industrial Vagina. The Political Economy of the Global Sex Trade. London: Routledge 2008.

    Directory of Open Access Journals (Sweden)

    Susanne Hofmann

    2010-02-01

    Full Text Available Sheila Jeffreys analysiert die Prozesse, die zu einer Industrialisierung und Globalisierung von Prostitution im späten 20. und 21. Jahrhundert geführt haben. Hauptverantwortlich für die gegenwärtige Diskursverschiebung um Prostitution ist für Jeffreys zum einen die sexuelle Revolution der 1970er Jahre und zum anderen die massive Finanzierung von Unterstützer/-innen der Sexarbeiterinnen zur HIV-Prävention in den 1980ern. Jeffreys legt wie in früheren Arbeiten ihre radikal-feministische Position dar und fordert eine Abschaffung der Prostitution. In ihrer Abrechnung mit dem liberalen feministischen Diskurs, für den eine Unterstützung von Sexarbeiterinnen prioritär ist, ignoriert sie die Widersprüchlichkeiten und Komplexitäten der gelebten Realitäten. An vielen Stellen ihres Buches bekräftigt Jeffreys stereotypische Männlichkeitsvorstellungen, was durch einen Blick über den Tellerrand des ihr vertrauten wissenschaftlichen Bezugsrahmens hätte vermieden werden können.

  10. Small catchments DEM creation using Unmanned Aerial Vehicles

    Science.gov (United States)

    Gafurov, A. M.

    2018-01-01

    Digital elevation models (DEM) are an important source of information on the terrain, allowing researchers to evaluate various exogenous processes. The higher the accuracy of DEM the better the level of the work possible. An important source of data for the construction of DEMs are point clouds obtained with terrestrial laser scanning (TLS) and unmanned aerial vehicles (UAV). In this paper, we present the results of constructing a DEM on small catchments using UAVs. Estimation of the UAV DEM showed comparable accuracy with the TLS if real time kinematic Global Positioning System (RTK-GPS) ground control points (GCPs) and check points (CPs) were used. In this case, the main source of errors in the construction of DEMs are the errors in the referencing of survey results.

  11. Preparation of MMC structures consisting of carbonfibre/aluminium prepregs by using the high velocity flame spraying; Herstellen von Halbzeugen aus kohlenstoffaserverstaerkten Aluminiumprepregs mit dem Hochgeschwindigkeitsflammspritzen

    Energy Technology Data Exchange (ETDEWEB)

    Wielage, B.; Rahm, J. [Lehrstuhl fuer Verbundwerkstoffe, TU Chemnitz-Zwickau, Chemnitz (Germany)

    1994-12-01

    The application of the thermal spraying process is a new way to produce carbon fibre reinforced Al-Matrix composites. Spreaded fibre rovings are enveloped in the matrix material with high velocity flame spraying. The advantage of the thermal spraying process is based in the low times for contacting between carbon fibres and liquid matrix material. Chemical reactions on the interface fibre/matrix, which are caused the decreasing of the fibre tensile strange, can be excluded. The thermal sprayed prepregs are compressed to MMC by hot pressing process. This longfibre reinforced composites are used to increase for instance casted components of motors. The aim of this research is the estimation of possibility to applicate the high velocity flame process for prepreg manufacturing. (orig.) [Deutsch] Die Anwendung des thermischen Spritzens zur Herstellung C/langfaserverstaerkter Al-Matrix Verbundwerkstoffe mittels Prepregtechnik beschreitet einen neuartigen Verfahrensweg. Zu Fasergelegen aufgespreizte Rovings werden durch Flamm- oder Hochgeschwindigkeitsflammspritzen mit dem Matrixmetall eingehuellt. Der Vorteil des thermischen Spritzens liegt in den geringen Kontaktzeiten der C-Fasern mit dem schmelzfluessigen Matrixmetall. Chemische Reaktionen zwischen Fasern und der Matrix, die zur Karbidbildung und Reduzierung der Verbundfestigkeit fuehren, koennen auch beim Verwenden von C-Fasern ohne Barriereschicht weitgehend ausgeschlossen werden. Die so hergestellten Prepregs koennen z.B. durch Heisspressen zu MMC kompaktiert werden, und als Halbzeuge (Inserts) Gussbauteile in hochbelasteten Bereichen partiell verstaerken. Die im Rahmen der Veroeffentlichung dargestellten Untersuchungen haben die kritische Beurteilung der Ergebnisse des HVOF-Spritzverfahrens zur Herstellung von C/Faser/Aluminiumprepregs zum Ziel. (orig.)

  12. "Das unausgesprochene Gefühl der Unzugehörigkeit" : Amerika als Zufluchtsmöglichkeit vor dem Selbst in Max Frischs Romanen Stiller und Homo faber

    Directory of Open Access Journals (Sweden)

    Vesna Kondrič Horvat

    1993-12-01

    Full Text Available In seiner Rede Emigranten, die er 1958 anläßlich der Georg-BtichnerPreis- Verleihung hielt und woraus das Titelzitat des vorliegenden Beitrags stammt, äußerte Max Frisch die Meinung, jeder frei gewahlte Wohnsitz solle dem Schriftsteller das unausgesprochene Gefühl der Unzugehörigkeit gestatten. Mit dem Satz: "Ich bin nicht Stiller!" (St 9 beginnt Frisch seinen 1954 veröffentlichten Roman Stiller. Ein Mann - ein Bildhauer -, der viele Versuche unternommen hat, seiner 'eigentlichen ', seelisch-existentiellen Identität zu entgehen, flieht schlieBlich, als alle anderen Versuche (sich im Spanischen Bürgerkrieg als ein mutiger Mann, sich in der Ehe als ein idealer Mann, sich in der Kunst als erfolgreicher Bildhauer zu bewahren scheitern, nach Amerika und läßt seine lungenkranke Frau Julika im Sanatorium in Davos zurück. Nach mehr als sechsjahrigem Fernbleiben kehrt er unter anderem Namen in die Heimat zurück und wird an der Schweizer Grenze - wegen vermeintlicher Verwicklung in eine Spionage-Affäre - verhaftet. An diesem Punkt beginnt der Roman.

  13. Die grossen Physiker und ihre Entdeckungen von den fallenden Körpern zu den Quarks

    CERN Document Server

    Segrè, Emilio

    1998-01-01

    Von Galileo Galilei bis zu Richard Feynman und Murray Gell-Mann - von den fallenden Körpern zu den Quarks: Der Physiknobelpreisträger Emilio Segre hat seine ganz persönliche Geschichte der Physik geschrieben. Er erzählt von den großen Gestalten und deren wichtigen Entdeckungen mit großer Anschaulichkeit und Lebendigkeit.

  14. Christine Löw: Frauen aus der Dritten Welt und Erkenntniskritik? Die postkolonialen Untersuchungen von Gayatri C. Spivak zu Globalisierung und Theorieproduktion. Sulzbach im Taunus: Ulrike Helmer Verlag 2009.

    Directory of Open Access Journals (Sweden)

    Heike Kahlert

    2011-07-01

    Full Text Available Christine Löw setzt sich in ihrer politikwissenschaftlichen Dissertation mit dem postkolonial-feministischen Denken Gayatri C. Spivaks auseinander und zielt in ihren sorgfältigen, überwiegend affirmativen Ausführungen darauf, Spivaks Überlegungen für die Politikwissenschaft nutzbar zu machen. Hierzu diskutiert sie deren theoretische Verortung in kritischen Ansätzen von Marxismus, Feminismus und Dekonstruktion sowie ihre Reflexionen zur epistemischen Gewalt westlichen Denkens gegenüber dem Süden und illustriert ihre Thesen zur Subalternität an vier ausgewählten politischen Themenfeldern. Zentrale Verdienste des Buches liegen darin, Spivaks Arbeiten in den deutschsprachigen sozialwissenschaftlichen Kontext einzuschreiben und weiterführende Forschungsfragen zu Globalisierung und Erkenntnisproduktion aufzuwerfen.Christine Löw’s dissertation (in the field of Political Science examines Gayatri C. Spivak’s postcolonial-feminist thinking. In her careful, mainly affirmative explanations she aims at utilizing Spivak’s considerations for Political Science. To this end, she discusses their theoretical position within critical approaches of Marxism, feminism, and deconstruction as well as her reflections on epistemic violence of western thinking against the south while also illustrating her theses on subalternity with four selected political topics. Situating Spivak’s works within the context of German-speaking social science and posing additional research questions on globalization and production of knowledge are the main achievements of this book.

  15. Von eingebetteten Systemen zu Cyber-Physical Systems

    Science.gov (United States)

    Wedde, Rorst F.; Lehnhoff, Sebastian; Rehtanz, Christian; Krause, Olav

    Das Hauptanliegen des Papiers ist, ein Paradigma für Probleme mit neuartigen Integrationsanforderungen für Forschung und Entwicklung in verteilten eingebetteten Echtzeitsystemen zu motivieren und vorzustellen, nämlich den Begriff Cyber-Physical Systems. Bei einer in letzter Zeit stark zunehmenden Anzahl von Realzeitanwendungen können ohne die Berücksichtigung solcher Forderungen keine praktisch brauchbaren Lösungen erwartet werden. Einige Anwendungsfelder werden angesprochen. Im Einzelnen werden dann für Elektroautos, die mit erneuerbaren Energien betrieben werden sollen, einerseits die Management-, verteilte Verhandlungs- und Verteilungsprobleme der benötigten Energie in einem bottom-up Ansatz gelöst. Andererseits wird als Teil unserer Projektarbeit die Bereitstellung von Reserveenergie für den allgemeinen Bedarf durch Autobatterien vorgestellt. Es zeigt sich, dass dies effizienter und wesentlich kurzfristiger in unserem verteilten Vorgehen geschehen kann als in traditionellen Verfahren.

  16. Wäre es Dir lieber, ich würde zu Recht verurteilt? - Sokrates Bund und die Frage der Kontrolle

    Directory of Open Access Journals (Sweden)

    Katharina Kaiser-Müller

    2014-09-01

    Full Text Available Die Ablösung von zweifelhafter menschlicher Kontrolle durch eine zuverlässige Software bietet eindrucksvolle Möglichkeiten. Mit der flächendeckenden Einführung von Sokrates Bund zum Schuljahr 2014/2015 wird endlich die Identifzierung von Pisadurchschnittsverderbern möglich. Die AutorInnen diskutieren die Lage ... Die Situation war dramatisch: Ungerecht angeklagt wegen Verführung der Jugend und Gottlosigkeit, sieht Sokrates dem Tod durch den Schierlingsbecher entgegen und antwortet auf die ob des Fehlurteils durchaus verständliche Klage von Xanthippe mit der titelgebenden Frage. Anschließend verweigert er die Flucht und zieht es vor, sich dem formal korrekt gefällten falschen Urteil zu beugen. Eine legendäre Entscheidung, in der Sokrates die Gesetzestreue mit der Begründung, man müsse schlechte Gesetze ändern, dürfe sie aber nicht übertreten, über das eigene Wohl stellt.

  17. Drei Avantgarde-Strömungen des heutigen US-Geisteslebens – und ihre Beziehung zu Europa

    Directory of Open Access Journals (Sweden)

    Roland Benedikter

    2006-12-01

    Full Text Available Zusammenfassung: Die heutigen USA gelten vielen als Vorreiter auf dem Weg zur integrativen Erneuerung von Wissenschafts- und Erkenntnisparadigmen. Dies vor allem im Bereich der traditionellen Kern- und Grundlagen-Wissenschaft der neuzeitlichen Universität: der Philosophie und der historisch aus ihr erwachsenen Psychologien. Seit einigen Jahren ist in den USA in der Tat eine Entwicklung im Gang, welche die Einseitigkeiten des nominalistisch-subjektivistischen Paradigmas der „Postmoderne“, welches aus ideengeschichtlicher Sicht die Epoche zwischen 1979 und 2001 geprägt hat, um einen neuen geistigen Objektivismus ausgleichen und beide zu einem neuen, „subjektiv-objektiven“ Paradigma integrieren will. Diese Entwicklung findet ihren Ausdruck in drei exemplarischen Avantgarde-Strömungen, die im vorliegenden Beitragvorgestellt sowie auf Charakteristiken und Wechselbeziehungen untersucht werden. Dabei erweist sich, dass die heutige ideengeschichtliche Avantgarde der USA in Kernterminologie, historischer Kontinuität und Ausrichtung stark pazifisch-asiatisch, aber noch zu wenig atlantisch-europäisch geprägt ist. Das scheint mit ein Grund dafür zu sein, warum diese Avantgarde-Ansätze trotz ihres hochwertigen Anregungs- und Innovations-Potentials im Hinblick auf ein ganzheitlichen Wissenschafts-Paradigma für das 21. Jahrhundert noch unübersehbare Schwierigkeiten haben, den atlantisch-europäisch geprägten Hauptstrom des Geistes-, Kultur- und politisch-sozialen Lebens ihrer Gesellschaft zu erreichen. Es zeigt sich, dass der innere Ausgleich zwischen pazifischen und atlantischen Ideen-Einflüssen eine der zentralen Herausforderungen für diese Avantgarde-Strömungen, aber darüber hinaus im Spiegelverhältnis auch für das europäische Kultur- und Gesellschafts-Paradigma sowie für die Entwicklung der integralen Bewegungen auf Weltebene insgesamt ist. Three avant-garde currents within the contemporary intellectual life in the United States

  18. Investigations on pretreatment of waste prior to fermentation by percolation using the ISKA {sup registered} process; Untersuchungen zur Vorbehandlung von Abfaellen vor der Vergaerung mittels Perkolation nach dem ISKA {sup registered} -Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Santen, H. [Technische Univ. Braunschweig (Germany). FG Abfallwirtschaft; Fricke, K. [Technische Univ. Braunschweig (Germany). Lehrstuhl Abfallwirtschaft; Engelhard, T.; Widmer, C. [ISKA GmbH, Ettlingen (Germany)

    2004-07-01

    Waste treatment prior to fermentation is a key aspect in achieving economic efficiency. One process is presented here in particular: percolation, in which waste is hydrolyzed aerobically, treated mechanically, and washed out with the aid of process water. The process involves a percolation stage followed by a fermentation stage. The process water burdened with organic matter is passed into a fermentation reactor in which the organic components are reacted anaerobically into biogas and bacterial mass, and the process water is recirculated into the percolation reactor. (orig.) [German] Vergaerungstechnologien zaehlen zu den etablierten Verfahren zur Gewinnung regenerativer Energien aus Biomasse. Fuer die Energieeffizienz dieser Verfahren sind die Leistung der Vergaerungsstufe, die Hoehe der Verfuegbarkeit der anaerob abzubauenden organischen Substanzen und der spezifische Energiebedarf des Behandlungsverfahrens massgeblich. Eine Schluesselstellung fuer die Optimierung beider Faktoren nimmt die Abfallaufbereitung vor der Vergaerung ein. Eine Technoloie zur Aufbereitung vor der Vergaerung basiert auf dem Verfahren der Perkolation, in der der Abfall aerob hydrolysiert,mechanisch aufgeschlossen und durch Zugabe von Prozesswasser ausgewaschen wird. Das Verfahren besteht aus einer Aufbereitung - der Perkolation - sowie einer nachgeschalteten Vergaerung. Das mit vergaerbarer Organik beladene Prozesswasser wird einem Vergaerungsreaktor zugefuehrt, in dem die organischen Komponenten anaerob zu Biogas und Bakterienmasse umgesetzt werden. Das aufbereitete Prozesswasser wird anschliessend wieder dem Perkolationsreaktor zugefuehrt. (orig.)

  19. Impacts of DEM resolution and area threshold value uncertainty on ...

    African Journals Online (AJOL)

    ... that DEM resolution influences the selected flow accumulation threshold value; the suitable flow accumulation threshold value increases as the DEM resolution increases, and shows greater variability for basins with lower drainage densities. The link between drainage area threshold value and stream network extraction ...

  20. Passive houses: houses without heatings. Experience with the first demonstration building at Darmstadt, and prospects for low-cost passive houses; Passivhaeuser: Gebaeude ohne Heizung. Erfahrungen mit dem ersten Demonstrationsgebaeude in Darmstadt und Perspektiven fuer kostenguenstige Passivhaeuser

    Energy Technology Data Exchange (ETDEWEB)

    Feist, W. [Inst. Wohnen und Umwelt, Darmstadt (Germany)

    1998-12-31

    `Passive` houses, i.e. houses without active heating, are extremely energy-optimized houses: thanks to their efficient thermal protection, their heat demand falls below the threshold requiring a separate space heat distribution system (15 kWh/(m{sup 2}a)). Passive houses will account for an increasing proportion of new buildings already during the next years. Houses with zero thermal energy demand involve notably higher construction effort but do not contribute essentially more to the mitigation of environmental pollution. (orig.) [Deutsch] Das Passivhaus ist ein extremes Niedrigenergiehaus, bei welchem durch guten Waermeschutz gerade die Schwelle unterschritten wird, bei der kein separates Heizwaermeverteilsystem mehr benoetigt wird (15 kWh/(m{sup 2}a)). Passivhaeuser werden schon in den naechsten Jahren einen zunehmenden Anteil an den Neubauten haben. Nullheizenergiehaeuser fuehren gegenueber dem Passivhaus zu spuerbar hoeherem baulichen Aufwand, ohne die Umwelt bedeutend mehr zu entlasten. (orig.)

  1. „Dichtes Verstehen“ als Schritt zu einer begegnenden Bibliothekskultur

    Directory of Open Access Journals (Sweden)

    Barbara Schellhammer

    2013-11-01

    Full Text Available Mit seiner ethnografischen Methode der dichten Beschreibung schlug der amerikanische Sozial­wissenschaftler Clifford Geertz eine völlig neue Richtung in der Kulturanthropologie ein. Diese sogenannte „interpretative Wende“ stellt auch jenseits der Ethnografie eine grosse Bereicherung dar. Überall wo Men­schen unterschiedlicher sozio-kultureller Herkunft aufeinander treffen, eignet sich die dichte Beschreibung, um kulturelle Bedeutungssysteme besser verstehen und einordnen zu können. Dies hilft nicht nur im Be­reich der qualitativen Sozialforschung, sondern auch ganz konkret im alltäglichen Leben, im privaten, wie auch im beruflichen Umgang mit fremden Erfahrungshorizonten. Denn die dichte Beschreibung sprengt vorgefertigte, „dünne“, sozio-kulturelle Typologien und Etikettierungen. Sie möchte vielmehr kulturelle Symbole auf deren tiefe Bedeutung phänomenologisch beschreiben und hermeneutisch ergründen. Diese Fähigkeit kann gerade auch im Umgang mit Kundinnen und Kunden im Bibliotheksbereich eine grosse Be­reicherung darstellen und dazu beitragen, eine positive Bibliothekskultur zu begründen. With his ethnographic approach Clifford Geertz established a new way of thinking and doing re­search in cultural anthropology. This so called “ethnographic turn” continues to be of great significance for many disciplines, not only for ethnological studies. Wherever people of different socio-cultural back­grounds meet, Geertz's method of “Thick Description” helps to understand foreign cultures, or, what Geertz calls “complex systems of meaning-making”. This is important for scientific research settings, but also for day-to-day encounters in multi-cultural societies in a globalized world. “Thin” forms of describing other­ness categorize, stereotype or come up with set explanations which will never be able to grasp the complex­ity and ever changing nature of peoples and cultures. Geertz's method seeks to (1 thoroughly

  2. Characterization of surface defects in high strength galvannealed steels; Charakterisierung der Oberflaechendefekte in hochfesten, nach dem Verzinken waermebehandelten Staehlen

    Energy Technology Data Exchange (ETDEWEB)

    Hong, M.H. [Automotive Steels Research Center, Technical Research Labs., POSCO, Gwangyang (Korea)

    2004-03-01

    Hot-dip galvannealed steel sheets, in which Fe of the substrate steel diffused into upper coating layer so as to be alloyed with Zn through a galvannealing above 450 C followed by hot-dip galvanizing process, generally show superior corrosion resistance, weldability and paintability. They have been widely used in automobile, construction, appliance industries and others. In particular, many researches have been carrying out to produce defect-free coating for an exposed automotive body panel. In the present study, high strength interstitial-free steel sheets containing Mn and P were galvannealed in an industrial continuous galvanizing line and defects on the coating surface were investigated by optical microscopy, scanning electron microscopy and transmission electron microscopy. It is clear that the quality of the substrate strongly affects galvannealed coating and it is essential to keep clean surface just before immediately dipping into molten Zn pot. (orig.) [German] Feuerverzinkte und danach waermebehandelte Stahlbleche, wo Fe aus dem Substratstahl in die obere Beschichtungsschicht diffundiert wie bei Legieren mit Zn und einer Waermebehandlung von ueber 450 C, gefolgt von einem Feuerverzinkverfahren, zeigen im Allgemeinen hervorragende Korrosionsbestaendigkeit, Schweissbarkeit und Anstreichbarkeit. Sie finden ein breites Einsatzgebiet bei Automobilen, im Bauwesen, in Werkzeugindustrien und anderen. Insbesondere wurde von vielen Forschern versucht, eine fehlerfreie Beschichtung fuer ein ungeschuetztes Karosserieteil herzustellen. In der vorliegenden Arbeit wurden hochfeste porenfreie Stahlbleche mit Mn- und P-Gehalt nach dem Verzinken in einer industriellen Endlos-Verzinkungslinie (CGL) waermebehandelt, wobei die Defekte auf der Schichtoberflaeche lichtmikroskopisch, rasterund transmissionselektronenmikroskopisch untersucht wurden. Klar ist, dass die Qualitaet des Substrats die nach dem Verzinken waermebehandelten Schichten beeinflusst und es ist von grosser

  3. ASPECTS OF DEM GENERATION FROM UAS IMAGERY

    Directory of Open Access Journals (Sweden)

    A. Greiwe

    2013-08-01

    Full Text Available Since a few years, micro UAS (unmanned aerial systems with vertical take off and landing capabilities like quadro- or octocopter are used as sensor platform for Aerophotogrammetry. Since the restricted payload of micro UAS with a total weight up of 5 kg (payload only up to 1.5 kg, these systems are often equipped with small format cameras. These cameras can be classified as amateur cameras and it is often the case, that these systems do not meet the requirements of a geometric stable camera for photogrammetric measurement purposes. However, once equipped with a suitable camera system, an UAS is an interesting alternative to expensive manned flights for small areas. The operating flight height of the above described UAS is about 50 up to 150 meters above ground level. This low flight height lead on the one hand to a very high spatial resolution of the aerial imagery. Depending on the cameras focal length and the sensor's pixel size, the ground sampling distance (GSD is usually about 1 up to 5 cm. This high resolution is useful especially for the automatic generation of homologous tie-points, which are a precondition for the image alignment (bundle block adjustment. On the other hand, the image scale depends on the object's height and the UAV operating height. Objects like mine heaps or construction sites show high variations of the object's height. As a result, operating the UAS with a constant flying height will lead to high variations in the image scale. For some processing approaches this will lead to problems e.g. the automatic tie-point generation in stereo image pairs. As precondition to all DEM generating approaches, first of all a geometric stable camera, sharp images are essentially. Well known calibration parameters are necessary for the bundle adjustment, to control the exterior orientations. It can be shown, that a simultaneous on site camera calibration may lead to misaligned aerial images. Also, the success rate of an automatic tie

  4. Methodische Anregungen zu Literarischen Gesprächen in der Sekundarstufe

    OpenAIRE

    Spinner, Kaspar H.

    2014-01-01

    Methodische Anregungen zu Literarischen Gesprächen in der Sekundarstufe. - In: Standardorientierung im Lese- und Literaturunterricht der Sekundarstufe I / Cornelia Rosebrock ; Heike Wirthwein. - Baltmannsweiler : Schneider-Verl. Hohengehren, 2014. - S. 126-132

  5. [Memel als Brücke zu den baltischen Ländern] / Ralph Tuchtenhagen

    Index Scriptorium Estoniae

    Tuchtenhagen, Ralph, 1961-

    2014-01-01

    Arvustus: Memel als Brücke zu den baltischen Ländern. Kulturgeschichte Klaipedas vom Mittelalter bis ins 20. Jahrhundert. (Tagungsberichte der Historischen Kommission für ost- und westpreussische Landesforschung. Bd. 26)

  6. Hydraulic fracturing - an attempt of DEM simulation

    Science.gov (United States)

    Kosmala, Alicja; Foltyn, Natalia; Klejment, Piotr; Dębski, Wojciech

    2017-04-01

    Hydraulic fracturing is a technique widely used in oil, gas and unconventional reservoirs exploitation in order to enable the oil/gas to flow more easily and enhance the production. It relays on pumping into a rock a special fluid under a high pressure which creates a set of microcracks which enhance porosity of the reservoir rock. In this research, attempt of simulation of such hydrofracturing process using the Discrete Element Method approach is presented. The basic assumption of this approach is that the rock can be represented as an assembly of discrete particles cemented into a rigid sample (Potyondy 2004). An existence of voids among particles simulates then a pore system which can be filled out by fracturing fluid, numerically represented by much smaller particles. Following this microscopic point of view and its numerical representation by DEM method we present primary results of numerical analysis of hydrofracturing phenomena, using the ESyS-Particle Software. In particular, we consider what is happening in distinct vicinity of the border between rock sample and fracking particles, how cracks are creating and evolving by breaking bonds between particles, how acoustic/seismic energy is releasing and so on. D.O. Potyondy, P.A. Cundall. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 41 (2004), pp. 1329-1364.

  7. Ebenen des Verstehens: Überlegungen zu einem Verfahren zum Wurzelziehen

    Science.gov (United States)

    Winter, Martin

    Wir bemühen uns, insbesondere bei Kindern, den Lernprozess auch im Mathematikunterricht durch den Einsatz von Materialien zu unterstützen. Die Arbeitsschritte dienen dabei oft der Vorbereitung oder Herleitung von Verfahren - in der Hoffnung, dass durch die Veranschaulichung Zusammenhänge besser verstanden werden. Worin dann das Verstehen besteht, wenn im Ergebnis ein Verfahren von den Kindern erfolgreich abgearbeitet wird, ist nicht unmittelbar zu sehen.

  8. RECHTSEXTREME LINKS LIEGEN LASSEN? EINE EINSCHÄTZUNG VON SZENEAUSSTEIGERN ZU MEDIENEFFEKTEN INNERHALB DER RECHTSEXTREMEN SZENE

    Directory of Open Access Journals (Sweden)

    Katharina Neumann

    2014-12-01

    Full Text Available Die vorliegende Arbeit geht der Frage nach, welche Reaktionen durch unterschiedliche Formen der Berichterstattung über Rechtsextremismus bei den Anhängern der rechten Szene ausgelöst werden und welche Strategien diese verfolgen, um ihre mediale Selbstinszenierung zu optimieren. Das Ziel der Arbeit ist es, Ansätze für einen verantwortungsbewussten Umgang mit Themen rechtsextremen Schwerpunkts für Medienmacher zu finden. Es werden 7 Aussteiger zu ihren Erfahrungen mit Medien in der Szene befragt. Zu den wichtigsten Ergebnissen dieser Arbeit zählt die Erkenntnis, dass die rechtsextreme Führungsriege aktiv Berichterstattung in den Massenmedien rezipiert und systematisch auswertet, um auf dieser Basis ihre politischen Selbstinszenierungsstrategien zu entwickeln. Die Szene reagiert also taktisch auf Berichte in den Massenmedien und versucht diese durch Anschlusskommunikation für ihre Zwecke zu instrumentalisieren. Wichtig für die Berichterstattung über Rechtsextremismus erscheint den Probanden die Betonung der Pluralität der Szene und eine ausführliche Hintergrundberichterstattung, die im besten Falle identitätsstiftende Attribute rechtsextremer Gruppen dekonstruiert und somit deren Glaubwürdigkeit in Frage stellt.

  9. Erictho und die Figuren der Entzweiung – Vorüberlegungen zu einer Poetik der Emergenz in Lucans Bellum civile

    Directory of Open Access Journals (Sweden)

    Alexander Arweiler

    2010-10-01

    Full Text Available Im Ausgang von der Möglichkeit, mit dem Wort figura Gestalten der Handlungsebene, dynamisch gefaßte Gedanken- / Wortgebilde und Erscheinungsweisen von Phänomenen geistiger und materieller Natur zu bezeichnen, läßt sich das Bellum civile als Werk beschreiben, an dessen Grund die Figur der Entzweiung steht, die durch eine Poetik der Emergenz in den Stoff entfaltet wird. Die vorgeschlagene Lektüre des Bellum civile wendet sich damit gegen das verbreitete Verständnis des Textes als eines (politischen, moralischen Kommentars zum Bürgerkrieg und kehrt die Hierarchie um: Der (sekundäre Bürgerkriegsstoff soll die zugrunde liegende Figur der Entzweiung explizieren, wird von dieser aber nicht gedeutet, sondern benutzt. Emergenz tritt als poetische Verhältnisbestimmung an die Stelle chronologischer und kausaler Erklärungsmodelle und behauptet eine bleibende Verbindung von Untergrund und hervortretendem Relief (Ereignis, Wesen, Gestalt. Dementsprechend lassen sich die Gestalten der Handlungsebene (figurae als Ekstasen des Textes fassen, die in einer Verdichtung des Textes aus dessen Oberfläche hervortreten, zugleich gemeinsam mit anderen Textelementen Erscheinungsweisen (figurae der abstrakten Figur der Entzweiung sind. Im sechsten Buch des Bellum civile wird die Ekstase insbesondere im Hervorgehen der Erictho aus der Konstruktion eines raum-zeitlich unmöglichen Thessalien kompositionell konkretisiert und imitationstechnischumgesetzt: Die ovidisch geprägte Begegnungsszenezwischen Sextus Pompeius und der textuell übercodierten Erictho bereitet den Boden für die Auffassung der Hexesowohl als einer Fortschreibung der nach Ovid vergehenden Sibylle als auch als figura (Gestalt und Erscheinungsweise Roms, das sich in einer Trennung von sich selbst gegenübertritt und im (poetischen Kannibalismus die Entzweiung zumVollzug bringt.

  10. Digital Elevation Models (DEMs) for the main 8 Hawaiian Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation model (DEM) data are arrays of regularly spaced elevation values referenced horizontally either to a Universal Transverse Mercator (UTM) projection...

  11. VT USGS NED Hydro-flattened DEM (30 meter) - statewide

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) VTHYDRODEM was created to produce a "hydrologically correct" DEM, compliant with the Vermont Hydrography Dataset (VHD) in support of the "flow...

  12. An Overview of the CapDEM Integrated Engineering Environment

    National Research Council Canada - National Science Library

    Lam, Sylvia; Poursina, Shiva; Spafford, Tim

    2005-01-01

    In order to gain a better understanding of the approach and the technology requirements to support collaborative engineering activities, the Collaborative Capability Definition, Engineering and Management (CapDEM...

  13. 2015 USACE NCMP Topobathy Lidar DEM: Avalon (NJ)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  14. IceBridge DMS L3 Photogrammetric DEM

    Data.gov (United States)

    National Aeronautics and Space Administration — The IceBridge DMS L3 Photogrammetric DEM (IODMS3) data set contains gridded digital elevation models and orthorectified images of Greenland derived from the Digital...

  15. 2013 USACE NCMP Topobathy Lidar DEM: Niihau (HI)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  16. 2015 USACE NCMP Topobathy Lidar DEM: Sand Island (WA)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  17. 2016 USACE NCMP Topobathy Lidar DEM: Gulf Coast (TX)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These bare earth Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 meter grid size, generated from data collected by the...

  18. 2016 NOAA Topobathy Lidar DEM: Upper Lake Michigan Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This digital elevation model (DEM) was created from data collected by Leading Edge Geomatics using a Leica Chiroptera II Bathymetric & Topographic Sensor. The...

  19. 2015 USACE NCMP Topobathy Lidar DEM: Egmont Key (FL)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These 1 m gridded bare earth Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations generated from data collected by the Coastal Zone...

  20. Greenland 5 km DEM, Ice Thickness, and Bedrock Elevation Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — A Digital Elevation Model (DEM), ice thickness grid, and bedrock elevation grid of Greenland acquired as part of the PARCA program are available in ASCII text format...

  1. On the way to greater transparency. Electricity labelling in Austria and Germany; Auf dem Weg zu mehr Transparenz. Stromkennzeichnung in Oesterreich und Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Kuhlmann, Josefine; Puchbauer-Schnabel, Angela [Energie-Control Austria, Wien (Austria)

    2012-03-15

    The liberalisation of the electricity markets and resulting emergence of competition have created a need for greater transparency towards consumers. The idea is to provide consumers with several criteria for selecting their electricity supplier, thus granting them an influence on production structures and allowing them to contribute to the development of a sustainable energy supply system. For this purpose the EU has set itself the goal of creating an appropriately transparent electricity labelling system involving the use of certificates of origin and has obliged the member states to transpose such requirements into national law. This article examines the relevant German and Austrian regulations and identifies points of departure for establishing a uniform procedure for the entire EU.

  2. Boreal forest biomass classification with TanDEM-X

    OpenAIRE

    Torano Caicoya, Astor; Kugler, Florian; Papathanassiou, Kostas; Hajnsek, Irena

    2013-01-01

    High spatial resolution X-band interferometric SAR data from the TanDEM-X, in the operational DEM generation mode, are sensitive to forest structure and can therefore be used for thematic boreal forest classification of forest environments. The interferometric coherence in absence of temporal decorrelation depends strongly on forest height and structure. Due to the rather homogenous structure of boreal forest, forest biomass can be derived from forest height, on the basis of allometric equati...

  3. Biodegradable plastics in composting. Results of a practical experiment in the Bad Duerkheim district; Einsatz von biologisch abbaubaren Kunststoffen in der Kompostwirtschaft. Erkenntnisse und Erfahrungen aus dem Praxisversuch im Landkreis Bad Duerkheim

    Energy Technology Data Exchange (ETDEWEB)

    Pabst, Klaus [Abfallwirtschaftsbetrieb Landkreis Bad Duerkheim, Bad Duerkheim (Germany)

    2012-11-01

    For collecting biomass waste, about 65,000 households in the Bad Duerkheim district were given ten bags each of the compostable BASF plastic material Ecovio {sup registered} FS. The biomass waste collected in the Ecovio {sup registered} bags were composted in a composting plant. After the compost process, no residues of the Ecovio {sup registered} bags were found in the rotting, i.e. they are completely degradable. Neither the compost quality nor the working processes in the composting plant were affected, and there was no bigger volume of sorting residues. 90% of the users stated that they were satisfied with the new biomass waste bags. (orig.) [German] Fuer die Entsorgung des Bioabfalls erhielten rund 65.000 Haushalte aus dem Landkreis Bad Duerkheim je zehn Biomuelltuten aus dem kompostierbaren BASF-Kunststoff Ecovio {sup registered} FS. Die in diesen Ecovio {sup registered} -Tueten gesammelten Bioabfaelle wurden im Biokompostwerk zu Kompost verarbeitet. Nach dem Kompostierungsprozess konnten keine Reste der Ecovio {sup registered} -Folien mehr in der Rotte gefunden werden, und sie wurden vollstaendig biologisch abgebaut. Durch den Einsatz dieser Tueten wurden weder die Kompostqualitaet noch die Arbeitsablaeufe im Biokompostwerk beeintraechtigt. Eine Erhoehung der Sortierreste war nicht festzustellen. Im Rahmen einer Kundenbefragung aeusserten sich rund 90% zufrieden mit dem Einsatz dieser Biomuelltueten. (orig.)

  4. Ein Versuch, Naturverhältnisse aus feministischer Sicht zu interpretieren Another attempt to explain the natural environment from a feminist perspective

    Directory of Open Access Journals (Sweden)

    Helga Purgand

    2002-07-01

    Full Text Available Mit dem vorliegenden Sammelband Geschlechterverhältnisse – Naturverhältnisse wird nach dem innovativen Beitrag der feministischen Debatte für umweltsoziologisches Denken gefragt und nach Überschneidungen, Grenzen und Zwischenräumen zwischen „Geschlecht“ und „Natur“ gesucht. In ihm wird der lobenswerte Versuch unternommen, einen Zusammenhang zwischen Geschlechter- und Naturverhältnissen herzustellen „die in der Umweltsoziologie bislang stark vernachlässigte feministische Diskussion und Geschlechterforschung einzubeziehen und als genderbezogene Perspektive zu etablieren“. (S. 9 Das Buch enthält Beiträge von 15 Autorinnen, die unterschiedliche Natur- und Geschlechtsverhältnisse facettenreich, überwiegend kreativ und theoretisch anspruchsvoll betrachten. Das Buch enthält Zugänge aus der allgemeinen Soziologie, den Sprach- und Kulturwissenschaften, aus politik- und naturwissenschaftlichen Zusammenhängen. Den ausdrücklich formulierten Anspruch, von multi- zu einer inter-disziplinären Durchdringung zu gelangen, erfüllt es nur in Ansätzen (besonders mit der Einleitung und den theoretischen Problemexplikationen. Das zustande gekommene „Nach-, Zusammen- und Querdenken“ über Begriffe, Theorien und neuere Forschungsansätze (von Foucault über Butler bis zu Donna Haraway belegt die Notwendigkeit, die naturwissenschaftlichen Annahmen „immanent zu dekonstruieren“. Sehr aufschlussreich sind in diesem Zusammenhang die Beiträge von Irmgard Schultz, Elvira Scheich, aber auch von Mary Mellor und besonders von Paula-Irene Villa, die interessante und kreative Gedanken zur Klärung des Verhältnisses von Natur, Kultur und Geschlecht anbieten. Deutlich wurde, dass weiterhin ein kontroverses Ringen um angemessene konzeptionelle Fassungen von Geschlechts- und Naturverhältnissen und die Integration von Gender als zentraler analytischer Querschnitts-Kategorie nötig sind. Insgesamt ist dem Buch ist eine schnelle Verbreitung und

  5. Römerzeitliche keramik aus dem nordöstlichen Turm der Römerstadt Horreum Margi

    Directory of Open Access Journals (Sweden)

    Petković Sofija

    2011-01-01

    Full Text Available Ćuprija, die ehemalige Römerstadt Horreum Margi, liegt im zentralen Teil Serbiens, an der Mündung des Flusses Ravanica in die Morava. Der Ort war ein Militärlager und spielte eine wichtige Rolle als Sammlungszentrum der Römerprovinz Moesia Superior (Moesia Prima. Zwischen 1986 und 1990 fanden die Ausgrabungen von Horreum Margi statt. Dabei wurden der Innenraum der spätrömischen Festung, die nördliche Mauer und der nordöstliche Turm erforscht. Während der Ausgrabung im Turm wurden unterschiedliche Keramiktypen entdeckt. Schüsseln (acht Typen bilden dabei die Mehrheit. Danach kommen Töpfe (sieben Typen, Amphoren (zwei Typen, Krüge (zwei Typen, Deckel (ein Typ und Becher (ein Typ. Sie gehören alle zu einer komplexen spätrömerzeitlichen Typologie, die für diese Fundstelle erstellt wurde und entsprechen zu den restlichen Keramiktypen, die im Festungsinneren und entlang der Nordmauer ausgegraben kamen. Der Text bietet einen Überblick aller Keramiktypen an, die im nordöstlichen Turm der Römerfestung Horreum Margi entdeckt wurden. [Projekat Ministarstva nauke Republike Srbije, br. 177007: Romanisierung, Urbanisierung und Transformation städtischer Zentren vomzivilen, militärischen und Wohnungscharakter in den römischen Provinzen auf dem Territorium Serbiens i br. 177007: Viminacium dierömische Stadt und Militärlager-Forschung der materiellen und geistigen Hinterlassenschaft mit der Verwendung moderner Technologien: Ferndetektion, Geophysik, Gis Digitalisierung und 3.D Visualisierung

  6. Power generation from animal meal in the circulating fluidized bed combustor at Lippewerk, Luenen; Energetische Nutzung von Tiermehl in der Zirkulierenden Wirbelschichtanlage (ZWS) auf dem Lippewerk, Luenen

    Energy Technology Data Exchange (ETDEWEB)

    Fendel, A. [Rethmann Lippewerk GmbH, Luenen (Germany)

    2001-07-01

    Experiments have shown that the Luenen plant can be operated with animal meal as mono-fuel. In fact, combustion characteristics will be better and emissions lower. The ash has an excellent burnout. It contains no proteins, so it appears reasonable to assume that any prions will be destroyed during combustion. [German] Auf Basis der bestehenden Betriebserfahrungen ist die ZWS in Luenen technisch nachweislich in der Lage, 100% der Feuerungswaermeleistung ueber Tiermehl abzudecken. Damit ist ein Betrieb als Monobrennstoffanlage durchfuehrbar. Besonders erfreulich ist zu werten, dass sich bei dem Einsatz von Tiermehl das Verbrennungsverhalten der Anlage positiver darstellt und eine Verbesserung der Emissionssituation auftritt. Die entstehende Asche weist einen ungewoehnlich guten Ausbrand auf. In ihr sind Proteine nicht mehr nachweisbar und daraus kann rueckgeschlossen werden, dass in der ZWS auch potentiell Prionen vernichtet werden. (orig.)

  7. Enhanced ASTER DEMs for Decadal Measurements of Glacier Elevation Changes

    Science.gov (United States)

    Girod, L.; Nuth, C.; Kääb, A.

    2016-12-01

    Elevation change data is critical to the understanding of a number of geophysical processes, including glaciers through the measurement their volume change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system on-board the Terra (EOS AM-1) satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available today, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. We developed MMASTER, an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC) model and the detection and correction of cross-track sensor jitter in order to compute DEMs. Our sensor modeling does not require ground control points and thus potentially allows for automatic processing of large data volumes. When compared to ground truth data, we have assessed a ±5m accuracy in DEM differencing when using our processing method, improved from the ±30m when using the AST14DMO DEM product. We demonstrate and discuss this improved ASTER DEM quality for a number of glaciers in Greenland (See figure attached), Alaska, and Svalbard. The quality of our measurements promises to further unlock the underused potential of ASTER DEMs for glacier volume change time series on a global scale. The data produced by our method will thus help to better understand the response of glaciers to climate change and their influence on runoff and sea level.

  8. Mobilization of PAH by synthetic gastrointestinal juice from contaminated soil of a former landfill area; Mobilisierung von PAK durch synthetische Verdauungssaefte aus dem kontaminierten Bodenmaterial einer Altlastenflaeche

    Energy Technology Data Exchange (ETDEWEB)

    Hack, A.; Selenka, F.; Wilhelm, M. [Bochum Univ. (Germany). Abt. fuer Hygiene, Sozial- und Umweltmedizin

    1998-10-01

    In the present study, the amount of polycyclic aromatic hydrocarbons (PAH) in contaminated soil material, which may be available for absorption in the gastrointestinal tract, is estimated by means of evaluating the PAH mobilization by synthetic gastric and intestinal juice in an in vitro test system. Five contaminated soil materials from a former landfill site are analysed in this gastrointestinal model for the PAH of the U.S.EPA-standard. For quantification, an HPLC method with reversed-phase chromatography and on line fluorescence detection is used. The PAH concentration of the contaminated soil materials ranged from 37 {mu}g/g up to 196 {mu}g/g in total. The mobilization of the PAH in the gastrointestinal model ranged from 0.3% up to 1.3% when gastrointestinal juice was used alone. In the presence of whole milk powder, however, the mobilization was enhanced to values from 10.8% up to 14.5%. Since the soil material was taken from different parts of the contaminated area, and since the mobilization of the PAH from the different materials shows only minor differences, the mobilization data evaluated may be considered as representative for the whole contaminated area. Compared to other contaminated soil materials, especially those from gas work areas or coke plants, the mobilization rate of PAH by the gastrointestinal model from the soil materials used in this study is low. The health risk caused, by ingestion of this soil material, as far as PAH are concerned, is actually smaller than the risk calculated from the total content of PAH of the contaminated soil. (orig.) [Deutsch] Im allgemeinen wird nur ein Teil der Schadstoffe aus oral aufgenommenem kontaminiertem Bodenmaterial im Gastrointestinaltrakt resorbiert. In der vorliegenden Studie wird der resorptionsverfuegbare Anteil der PAK aus dem real kontaminierten Bodenmaterial einer ehemaligen Deponie aus dem sueddeutschen Raum anhand der Mobilisierbarkeit der PAK durch die Verdauungssaefte des oberen

  9. Algumas anedotas sobre Demóstenes: uma releitura

    Directory of Open Access Journals (Sweden)

    Maddalena Vallozza

    2013-06-01

    Full Text Available Muitas das anedotas sobre Demóstenes estão relacionados a seus problemas de voz e a suas dificuldades no momento da hypokrisis. Eu proponho uma reinterpretação das páginas em que eles nos são transmitidos: de Quintiliano (11, 3, a principal testemunha, a Cícero (Orator 26 e 56-58, Brutus 142, De Oratore I 261 e III 213, do autor da seção sobre Demóstenes nas Vidas dos Dez Oradores (844 d-845 b à Vida de Demóstene, de Plutarco. Com base nisso, particularmente graças a Plutarco, que cita Hermipo e Demétrio de Fáleros, é possível formular a hipótese de que a tradição nasceu no Perípato, na área de interesses pela hypokrisis que demonstram o perdido Perì hypokríseos de Teofrasto e os fragmentos da Retórica de Demétrio de Fáleros.

  10. Famulaturreife: Eine Idee auf dem Prüfstand [Clerkship maturity: Does the idea of training clinical skills work?

    Directory of Open Access Journals (Sweden)

    Stosch, Christoph

    2011-08-01

    Full Text Available [english] Background: With the reformed curriculum “4C”, the Medical Faculty of the University of Cologne has started to systematically plan practical skills training, for which Clerkship Maturity is the first step. The key guidelines along which the curriculum was development were developed by experts. This approach has now been validated. Materials and methods: Both students and teachers were asked to fill in a questionnaire regarding preclinical practical skills training to confirm the concept of Clerkship Maturity. Results and discussion: The Cologne training program Clerkship Maturity can be validated empirically overall through the activities of the students awaiting the clerkship framework and through the evaluation by the medical staff providing the training. The subjective ratings of the advantages of the training by the students leave room for improvement. Apart from minor improvements to the program, the most likely solution providing sustainable results will involve an over-regional strategy for establishing skills training planned as part of the curriculum.[german] Hintergrund: Mit dem Modellstudiengang Humanmedizin hat die Medizinische Fakultät der Universität zu Köln begonnen, die praktische Ausbildung, deren erster Schritt die „Famulaturreife“ ist, systematisch zu planen. Dabei wurden die handlungsleitenden Strukturen, entlang derer das Curriculum entwickelt wurde, auf Experteneinschätzung basierend entworfen. Dieses Vorgehen wurde nun einer Validierung unterworfen.Material und Methode: Sowohl Studierende als auch Lehrende wurden mit einem Fragebogen zur Ausbildung in Praktischen Fertigkeiten konfrontiert, um das Konstrukt „Famulaturreife“ zu bestätigen. Ergebnisse und Diskussion: Das Kölner Ausbildungsprogramm zur „Famulaturreife“ kann insgesamt empirisch durch die Tätigkeiten der Studierenden im Rahmen der Famulatur sowie durch die Einschätzung seitens der ausbildenden Ärzte bestätigt werden. Der

  11. Präferenzen, Wohlergehen und Rationalität – Zu den begrifflichen Grundlagen des libertären Paternalismus und ihren Konsequenzen für seine Legitimierbarkeit

    Directory of Open Access Journals (Sweden)

    Klonschinski Andrea

    2016-07-01

    Full Text Available Der libertäre Paternalismus (LP genießt in Politik, Wissenschaft und Öffentlichkeit eine große Popularität, die er insbesondere zwei Merkmalen verdankt: Erstens stützt sich der LP auf verhaltensökonomische Ergebnisse, die zeigen, dass individuelle Entscheidungen oft nicht der neoklassischen Rationalitätskonzeption entsprechen, sodass Individuen durch sogenanntes Nudging zu besseren, ihren wahren Präferenzen entsprechenden Entscheidungen verholfen werden könne. Zweites ist damit der Anspruch verbunden, das Wohlergehen der Individuen, wie sie selbst es verstehen, zu erhöhen. Dieser Beitrag zeigt anhand einer dogmengeschichtlichen Analyse der zentralen, dem LP zugrunde liegenden Begriffe Präferenz, Nutzen, Rationalität und Wohlergehen, dass der LP diesen Anspruch nicht einlösen kann. Eine detaillierte begriffliche Analyse ist deshalb geboten, weil diese Konzepte in der Ökonomik immer wieder für Missverständnisse sorgen. Eine theoriegeschichtlich informierte Untersuchung wiederum ist notwendig, da diese Konfusion insbesondere auf der Tatsache beruht, dass der Gehalt dieser Begriffe sich im Laufe der Zeit gravierend verändert hat und sich die verschiedenen Bedeutungen heute z. T. wechselseitig überlagern.

  12. Novel application of DEM to modelling comminution processes

    International Nuclear Information System (INIS)

    Delaney, Gary W; Cleary, Paul W; Sinnott, Matt D; Morrison, Rob D

    2010-01-01

    Comminution processes in which grains are broken down into smaller and smaller sizes represent a critical component in many industries including mineral processing, cement production, food processing and pharmaceuticals. We present a novel DEM implementation capable of realistically modelling such comminution processes. This extends on a previous implementation of DEM particle breakage that utilized spherical particles. Our new extension uses super-quadric particles, where daughter fragments with realistic size and shape distributions are packed inside a bounding parent super-quadric. We demonstrate the flexibility of our approach in different particle breakage scenarios and examine the effect of the chosen minimum resolved particle size. This incorporation of the effect of particle shape in the breakage process allows for more realistic DEM simulations to be performed, that can provide additional fundamental insights into comminution processes and into the behaviour of individual pieces of industrial machinery.

  13. EVALUATING THE ACCURACY OF DEM GENERATION ALGORITHMS FROM UAV IMAGERY

    Directory of Open Access Journals (Sweden)

    J. J. Ruiz

    2013-08-01

    Full Text Available In this work we evaluated how the use of different positioning systems affects the accuracy of Digital Elevation Models (DEMs generated from aerial imagery obtained with Unmanned Aerial Vehicles (UAVs. In this domain, state-of-the-art DEM generation algorithms suffer from typical errors obtained by GPS/INS devices in the position measurements associated with each picture obtained. The deviations from these measurements to real world positions are about meters. The experiments have been carried out using a small quadrotor in the indoor testbed at the Center for Advanced Aerospace Technologies (CATEC. This testbed houses a system that is able to track small markers mounted on the UAV and along the scenario with millimeter precision. This provides very precise position measurements, to which we can add random noise to simulate errors in different GPS receivers. The results showed that final DEM accuracy clearly depends on the positioning information.

  14. Lightcurve and Rotation Period Determinations for 1599 Giomus and 1888 Zu Chong-Zhi

    Science.gov (United States)

    Foylan, Mike; Rowe, Basil; Smith, Kevin Stephen

    2018-04-01

    Collaborative CCD photometric observations of mainbelt asteroids 1599 Giomus (1950 WA) and 1888 Zu Chong-Zhi (1964 VO1) were acquired during 2017 November and December. A rotation period of 9.53 ± 0.03 h and amplitude of A = 0.06 ± 0.05 mag were determined for 1599 Giomus and 11.053 ± 0.003 h and amplitude of A = 0.56 ± 0.05 mag were determined for 1888 Zu Chong-Zhi.

  15. Zu einigen entwicklungstendenzen beim ausdruck der gewissheits modalität

    Directory of Open Access Journals (Sweden)

    Stojan Bračič

    1981-12-01

    Full Text Available Das verfolgte Ziel in diesem Artikel - einem für den Druck bear­ beiteten Kapitel aus der Magisterarbeit des Verfassers - ist es, möglichst viele Ausdrucksmittel zum Ausdruck der Gewissheits­ modälitat (im weiteren GMO zu finden und sie sys.tematisch zu behandeln. Ausserdem soll durch statistische Bearbeitung der im Korpus gefundenen Belege festgestellt werden, ob man in der Zeit­ spanne derletzten siebzig Jahre beim Ausdruck der GMO in der deutschen Sprache mit Entwicklungstendenzen /ET/ rechnen kann.

  16. Influence of Terraced area DEM Resolution on RUSLE LS Factor

    Science.gov (United States)

    Zhang, Hongming; Baartman, Jantiene E. M.; Yang, Xiaomei; Gai, Lingtong; Geissen, Viollette

    2017-04-01

    Topography has a large impact on the erosion of soil by water. Slope steepness and slope length are combined (the LS factor) in the universal soil-loss equation (USLE) and its revised version (RUSLE) for predicting soil erosion. The LS factor is usually extracted from a digital elevation model (DEM). The grid size of the DEM will thus influence the LS factor and the subsequent calculation of soil loss. Terracing is considered as a support practice factor (P) in the USLE/RUSLE equations, which is multiplied with the other USLE/RUSLE factors. However, as terraces change the slope length and steepness, they also affect the LS factor. The effect of DEM grid size on the LS factor has not been investigated for a terraced area. We obtained a high-resolution DEM by unmanned aerial vehicles (UAVs) photogrammetry, from which the slope steepness, slope length, and LS factor were extracted. The changes in these parameters at various DEM resolutions were then analysed. The DEM produced detailed LS-factor maps, particularly for low LS factors. High (small valleys, gullies, and terrace ridges) and low (flats and terrace fields) spatial frequencies were both sensitive to changes in resolution, so the areas of higher and lower slope steepness both decreased with increasing grid size. Average slope steepness decreased and average slope length increased with grid size. Slope length, however, had a larger effect than slope steepness on the LS factor as the grid size varied. The LS factor increased when the grid size increased from 0.5 to 30-m and increased significantly at grid sizes >5-m. The LS factor was increasingly overestimated as grid size decreased. The LS factor decreased from grid sizes of 30 to 100-m, because the details of the terraced terrain were gradually lost, but the factor was still overestimated.

  17. Discrete Element Modeling (DEM) of Triboelectrically Charged Particles: Revised Experiments

    Science.gov (United States)

    Hogue, Michael D.; Calle, Carlos I.; Curry, D. R.; Weitzman, P. S.

    2008-01-01

    In a previous work, the addition of basic screened Coulombic electrostatic forces to an existing commercial discrete element modeling (DEM) software was reported. Triboelectric experiments were performed to charge glass spheres rolling on inclined planes of various materials. Charge generation constants and the Q/m ratios for the test materials were calculated from the experimental data and compared to the simulation output of the DEM software. In this paper, we will discuss new values of the charge generation constants calculated from improved experimental procedures and data. Also, planned work to include dielectrophoretic, Van der Waals forces, and advanced mechanical forces into the software will be discussed.

  18. Precise baseline determination for the TanDEM-X mission

    Science.gov (United States)

    Koenig, Rolf; Moon, Yongjin; Neumayer, Hans; Wermuth, Martin; Montenbruck, Oliver; Jäggi, Adrian

    The TanDEM-X mission will strive for generating a global precise Digital Elevation Model (DEM) by way of bi-static SAR in a close formation of the TerraSAR-X satellite, already launched on June 15, 2007, and the TanDEM-X satellite to be launched in May 2010. Both satellites carry the Tracking, Occultation and Ranging (TOR) payload supplied by the GFZ German Research Centre for Geosciences. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), and a Laser retro-reflector (LRR) for precise orbit determination (POD) and atmospheric sounding. The IGOR is of vital importance for the TanDEM-X mission objectives as the millimeter level determination of the baseline or distance between the two spacecrafts is needed to derive meter level accurate DEMs. Within the TanDEM-X ground segment GFZ is responsible for the operational provision of precise baselines. For this GFZ uses two software chains, first its Earth Parameter and Orbit System (EPOS) software and second the BERNESE software, for backup purposes and quality control. In a concerted effort also the German Aerospace Center (DLR) generates precise baselines independently with a dedicated Kalman filter approach realized in its FRNS software. By the example of GRACE the generation of baselines with millimeter accuracy from on-board GPS data can be validated directly by way of comparing them to the intersatellite K-band range measurements. The K-band ranges are accurate down to the micrometer-level and therefore may be considered as truth. Both TanDEM-X baseline providers are able to generate GRACE baselines with sub-millimeter accuracy. By merging the independent baselines by GFZ and DLR, the accuracy can even be increased. The K-band validation however covers solely the along-track component as the K-band data measure just the distance between the two GRACE satellites. In addition they inhibit an un-known bias which must be modelled in the comparison, so the

  19. MR imaging of gastric wall layers in vitro: correlation to the histologic wall structure; Experimentelle Darstellung der Schichten der Magenwand mittels MRT: Korrelation mit dem histologischen Wandaufbau

    Energy Technology Data Exchange (ETDEWEB)

    Lubienski, A.; Grenacher, L.; Schipp, A.; Duex, M. [Radiologische Klinik, Abt. Radiodiagnostik, Ruprecht-Karls-Univ. Heidelberg (Germany); Reith, W. [Abt. fuer Neuroradiologie der Radiologischen Universitaetsklinik, Univ. Saarland (Germany); Mechtersheimer, G. [Inst. fuer Allgemeine Pathologie, Ruprecht-Karls-Univ. Heidelberg (Germany)

    2002-04-01

    Purpose: To correlate gastric wall layers visible of MRI with the anatomical structure of the gastric wall. Methods: After macroscopic preparation 5 x 5 cm post-mortem tissue sections of the gastric antrum were evaluated using a 2.4 Tesla MR unit (Bruker, Ettlingen, Germany). MR imaging consisted of T2-weighted multi-spinecho sequences in longitudinal and axial directions. The specimens then were stained with hematoxylin-eosin for histological examination. After that histological correlation of the gastric wall layers visible on MRI was performed. Results: In all specimens four gastric wall layers could be clearly identified on MRI. The direct comparison of those layers to the histological findings showed the following correlation: 1. intermediate signal = mucosa, 2. hypointense signal = lamina muscularis mucosae, 3. hyperintense signal = submucosa, 4. intermediate signal = muscularis propria. Conclusions: Gastric wall layers visible on MRI were successfully correlated to the anatomic layers of the gastric wall. This allows us for the first time to classify invasion of gastric carcinoma using high spatial-resolution MR imaging. However, the subserosa and serosa are excluded from this conclusion, because so far a reliable statement concerning the value of MRI to depict these very variable layers is not possible. (orig.) [German] Ziel: Ziel der Studie war es, magnetresonanztomographisch sichtbare Schichten der Magenwand mit dem anatomischen Wandaufbau des Magens zu korrelieren. Methoden: Nach makroskopischer Skelettierung wurden 5 x 5 cm messende Stuecke des Magenantrums von fuenf Leichenmaegen in einem 2.4 Tesla MR-Geraet (Bruker, Ettlingen, Deutschland) untersucht. Es wurden T2-gewichtete Multispinechosequenzen in longitudinaler und axialer Richtung zum Praeparat angefertigt. Nach Faerbung der Magenpraeparate mit Haematoxylin-Eosin wurden die MR-Bilder mit den histologischen Schnitten in Bezug auf sichtbare Wandschichten korreliert. Ergebnisse: Regelmaessig konnten

  20. Polilingvizmas kaip „grįžimas namõ“: tarp Babilono katastrofos ir Jeruzalės Sekminių stebuklo. Vlado Braziūno poezijos at(sivėrimai | Der Polylinguismus als „Rückkehr nach Hause“: zwischen der babylonischen Katastrophe und dem Pfingstwunder von Jerusalem

    Directory of Open Access Journals (Sweden)

    Skirmantas Valentas

    2006-01-01

    Full Text Available In diesem Beitrag wird ein Versuch unternommen, die Widerspiegelung von zwei philologisch wichtigen Episoden der Heiligen Schrift in der modernen Poesie zu vermitteln. Es geht um die Erzählung von der babylonischen Sprachenverwirrung im Buch der Anfänge und um das in den Apostelgeschichten erwähnte Pfingstwunder, die beide unter einen Begriff Polylinguismus fallen.Der Polylinguismus in der Poesie ist als eine syntagmatische Mehrsprachigkeit, anders gesagt, als eine implizite Benennung desgleichen Denotats in einigen Sprachen, zu betrachten.Der verallgemeinernde Begriff „Rückkehr nach Hause“ lässt zwei Begriffe in Verbindung setzen: die sich nach der babylonischen Katastrophe etablierte Mehrsprachigkeit und das Pfingstwunder als eine Möglichkeit die verwirrten Sprachen wieder zu einem Harmonischen zusammenzufügen.Da die Poesie als ein Grammatik modellierender Text vorliegt, ist eine Idee hervorzuheben, dass neben einer üblichen Sprache in der Poesie eine andere Sprache mit völlig anderen Regeln aufgedeckt werden muss.Als eines der Grundmerkmale der üblichen Sprache ist ein in ihr enthaltenes Oppositionsystem zu betrachten. Als Grundmerkmal einer anderen Sprache gilt dagegen das Schwinden der grundlegenden Oppositionen, das einen endlosen und periodischen Text schafft.Der Polylinguismus der Poesie wird in den linguistischen Geschichten am deutlichsten sichtbar. Der Polylinguismus in der Poesie, der dem Simultandolmetschen nahsteht, führt uns auf das Pfingstwunder zurück.

  1. The legal compatibility of the German Act for mandatory use of electricity from renewables (Stromeinspeisungsgesetz) with the Treaty of Rome; Die Vereinbarkeit des Stromeinspeisungsgesetzes mit dem EG-Vertrag

    Energy Technology Data Exchange (ETDEWEB)

    Iro, S.P.

    1998-04-01

    In force since 1990, the German Stromeinspeisungsgesetz (obliging electric utilities to purchase at mandatory prices electricity from renewable energy sources) still is an issue of debates about legal justification under German law and compatibility with legislation on the European Internal Market for elctricity. The contribution analyses the points of friction with the Treaty of Rome, in particular the European regulations governing subsidization of national industries or undertakings by their government, aspects of freedom of trade within the EU and restrictive trade practices law. The conclusion of the legal analysis is that the German act is compatible with the subsidy regulations of the EU, but calls for amendment to correct infringements of the principles of free trade and competition within the EU in the provisions excluding electricity from renewables generated in other EU Member States. (CB) [Deutsch] Es ist schon seit 1990 in Kraft, und das Stromeinspeisungsgesetz bietet nach wie vor Anlass zu Diskussionen, sowohl aus dem Blickwinkel des deutschen Rechts wie auch vom Standpunkt des EGV. Der Beitrag konzentriert sich auf die rechtlichen Reibungspunkte mit europaeischem Recht, konkret die Regelungen ueber erlaubte staatliche Beihilfen an nationale Unternehmen, deren Abgrenzung zu allgemein wirtschaftspolitischen Massnahmen eines Staates und Aspekte der Warenverkehrsfreiheit und des Wettbewerbs auf dem europaeischen Binnenmarkt. Das Ergebnis der rechtlichen Analyse des Beitrags sieht in der Subventionierung der Stromerzeugung aus erneuerbaren Energien eine politische Entscheidung, die mit EG-Interessen und EG-Recht vereinbar ist. Das Gesetz verstosse jedoch gegen die Warenverkehrsfreieheit auf dem Binnenmarkt in den Regelungen, wo es entsprechend erzeugten Strom aus anderen Mitgliedslaendern von der Subventionierung ausnimmt. (orig./CB)

  2. Biotechnologische Konversion von Nebenströmen der Lebensmittelindustrie zu hochwertigen Aromastoffen durch Basidiomyceten

    OpenAIRE

    Kunkel, Katrin

    2013-01-01

    29 Basidiomyceten wurden hinsichtlich der Bildung von natürlichen Aromastoffgemischen in Substrat-supplementierten Submerskulturen untersucht. Als Substrate dienten Karottenschalen, Blattspinat, Sellerietrester, Zwiebelschalen, Lauchtrester und Zitruspellets, die als Reststoffe in der lebensmittelverarbeitenden Industrie anfallen. Die Geruchseindrücke von 61 Biotransformationen wurden im Vergleich zu den Substrat- und Pilz-Blindwerten beurteilt und die Reproduzierbarkeit der ansprechendsten B...

  3. Design of the intake and outlet areas of turbines; Gestaltung der Zu- und Abstroemung von Turbinen

    Energy Technology Data Exchange (ETDEWEB)

    Ruprecht, A. [Stuttgart Univ. (Germany). Abt. Numerische Stroemungsmechanik

    1997-12-31

    Especially in the case of plants with a small height of drop, efficiency can be substantially impaired. Moreover, an unfavourable design of the inlet area can result in operating problems because of instationary flow phenomena. Similar considerations apply to the draft tube and outflow area. Selected examples are chosen to demonstrate problems and propose improvements. As modelling demands too much effort in the case of small plants, the investigations are carried out using modern numerical flow calculation methods. As demonstrated, inlet and outflow areas can be economically designed using these methods even in the case of small hydro power stations so as to present favourable flow parameters. [Deutsch] Vor allem bei Anlagen mit kleiner Fallhoehe kann der Verlust betraechtlich sein. Darueber hinaus kann eine unguenstige Gestaltung des Einlaufbereichs durch instationaere Stroemungsphaenomene auch zu Problemen beim Betrieb der Anlage fuehren. Aehnliches gilt bei der Gestaltung des Saugrohrs und der Abstroemung. An ausgewaehlten Beispielen werden Probleme dargestellt und Verbesserungsvorschlaege aufgezeigt. Da bei kleinen Anlagen Modellversuche zu aufwendig sind, erfolgen die Untersuchungen mit modernen Methoden der numerischen Stroemungsrechnung. Es wird gezeigt, dass man mit diesen Methoden in der Lage ist, auch bei Kleinwasserkraftanlagen wirtschaftlich eine stroemungsguenstige Gestaltung von Zu- und Abstroemung zu erreichen. (orig.)

  4. Gefährlicher Trend : Smartphone im Strassenverkehr : auch zu Fuss ist das Ablenkungspotenzial sehr gross.

    NARCIS (Netherlands)

    2016-01-01

    Viele Menschen, die sich zu Fuß im Straßenverkehr bewegen, nutzen dabei das Smartphone. Dies ist das Ergebnis einer Erhebung von DEKRA in sechs europäischen Hauptstädten. Von den rund 14.000 erfassten Personen nutzten fast 17 Prozent ihr Handy — für Textnachrichten, zum Telefonieren oder Musikhören.

  5. Neue Welle an IFRS: Wechseln schon bald mehr Firmen zu Swiss GAAP FER?

    OpenAIRE

    Sager, Marc; Vial, Jérôme

    2016-01-01

    Seit 2008 wechseln an der SIX kotierte Firmen vermehrt den Rechnungslegungsstandard von den IFRS zu Swiss GAAP FER (FER). Mit IFRS 9 (Finanzinstrumente), IFRS 15 (Erlöse aus Verträgen mit Kunden) und IFRS 16 (Leasingverhältnisse) werden die Anwender einmal mehr mit weitreichenden Änderungen konfrontiert.

  6. Resource Management in Diffserv On DemAnd (RODA) PHR

    NARCIS (Netherlands)

    Westberg, L.; Jacobsson, M.; de Kogel, M.; Oosthoek, S.; Partain, D.; Rexhepi, V.; Wallentin, P.; Karagiannis, Georgios

    The purpose of this draft is to present the Resource Management in Diffserv (RMD) On DemAnd (RODA) Per Hop Reservation (PHR) protocol. The RODA PHR protocol is used on a per-hop basis in a Differentiated Services (Diffserv) domain and extends the Diffserv Per Hop Behavior (PHB) with resource

  7. Spatial Characterization of Landscapes through Multifractal Analysis of DEM

    Directory of Open Access Journals (Sweden)

    P. L. Aguado

    2014-01-01

    Full Text Available Landscape evolution is driven by abiotic, biotic, and anthropic factors. The interactions among these factors and their influence at different scales create a complex dynamic. Landscapes have been shown to exhibit numerous scaling laws, from Horton’s laws to more sophisticated scaling of heights in topography and river network topology. This scaling and multiscaling analysis has the potential to characterise the landscape in terms of the statistical signature of the measure selected. The study zone is a matrix obtained from a digital elevation model (DEM (map 10 × 10 m, and height 1 m that corresponds to homogeneous region with respect to soil characteristics and climatology known as “Monte El Pardo” although the water level of a reservoir and the topography play a main role on its organization and evolution. We have investigated whether the multifractal analysis of a DEM shows common features that can be used to reveal the underlying patterns and information associated with the landscape of the DEM mapping and studied the influence of the water level of the reservoir on the applied analysis. The results show that the use of the multifractal approach with mean absolute gradient data is a useful tool for analysing the topography represented by the DEM.

  8. Eine neue Tornaria aus dem Ostindischen Archipel (Tornaria Sunieri)

    NARCIS (Netherlands)

    Stiasny, G.

    1921-01-01

    Da aus dem malayischen Archipel durch die Siboga-Monographie Spengels (2) zwar eine Anzahl Enteropneusten, jedoch nur eine einzige Tornaria bekannt worden ist, war anzunehmen, dass noch andere Tornarien in diesem Gebiete nachzuweisen sein würden. Von dieser Erwartung ausgehend wandte ich mich an

  9. Artificial terraced field extraction based on high resolution DEMs

    Science.gov (United States)

    Na, Jiaming; Yang, Xin; Xiong, Liyang; Tang, Guoan

    2017-04-01

    With the increase of human activities, artificial landforms become one of the main terrain features with special geographical and hydrological value. Terraced field, as the most important artificial landscapes of the loess plateau, plays an important role in conserving soil and water. With the development of digital terrain analysis (DTA), there is a current and future need in developing a robust, repeatable and cost-effective research methodology for terraced fields. In this paper, a novel method using bidirectional DEM shaded relief is proposed for terraced field identification based on high resolution DEM, taking Zhifanggou watershed, Shannxi province as the study area. Firstly, 1m DEM is obtained by low altitude aerial photogrammetry using Unmanned Aerial Vehicle (UAV), and 0.1m DOM is also obtained as the test data. Then, the positive and negative terrain segmentation is done to acquire the area of terraced field. Finally, a bidirectional DEM shaded relief is simulated to extract the ridges of each terraced field stages. The method in this paper can get not only polygon feature of the terraced field areas but also line feature of terraced field ridges. The accuracy is 89.7% compared with the artificial interpretation result from DOM. And additional experiment shows that this method has a strong robustness as well as high accuracy.

  10. Evaluating DEM results with FEM perspectives of load : soil interaction

    NARCIS (Netherlands)

    Tadesse, D.

    2004-01-01

    Keywords: Load - soil interaction, soil structure, soil mechanical properties, FEM (Finite Element Method), Plaxis (Finite Element Code), granular particles, shear stress, DEM (Distinct Element Method),

  11. Estimating River Surface Elevation From ArcticDEM

    Science.gov (United States)

    Dai, Chunli; Durand, Michael; Howat, Ian M.; Altenau, Elizabeth H.; Pavelsky, Tamlin M.

    2018-04-01

    ArcticDEM is a collection of 2-m resolution, repeat digital surface models created from stereoscopic satellite imagery. To demonstrate the potential of ArcticDEM for measuring river stages and discharges, we estimate river surface heights along a reach of Tanana River near Fairbanks, Alaska, by the precise detection of river shorelines and mapping of shorelines to land surface elevation. The river height profiles over a 15-km reach agree with in situ measurements to a standard deviation less than 30 cm. The time series of ArcticDEM-derived river heights agree with the U.S. Geological Survey gage measurements with a standard deviation of 32 cm. Using the rating curve for that gage, we obtain discharges with a validation accuracy (root-mean-square error) of 234 m3/s (23% of the mean discharge). Our results demonstrate that ArcticDEM can accurately measure spatial and temporal variations of river surfaces, providing a new and powerful data set for hydrologic analysis.

  12. DEM-based research on the landform features of China

    Science.gov (United States)

    Tang, Guoan; Liu, Aili; Li, Fayuan; Zhou, Jieyu

    2006-10-01

    Landforms can be described and identified by parameterization of digital elevation model (DEM). This paper discusses the large-scale geomorphological characteristics of China based on numerical analysis of terrain parameters and develop a methodology for characterizing landforms from DEMs. The methodology is implemented as a two-step process. First, terrain variables are derived from a 1-km DEM in a given statistical unit including local relief, the earth's surface incision, elevation variance coefficient, roughness, mean slope and mean elevation. Second, every parameter regarded as a single-band image is combined into a multi-band image. Then ISODATA unsupervised classification and the Bayesian technique of Maximum Likelihood supervised classification are applied for landform classification. The resulting landforms are evaluated by the means of Stratified Sampling with respect to an existing map and the overall classification accuracy reaches to rather high value. It's shown that the derived parameters carry sufficient physiographic information and can be used for landform classification. Since the classification method integrates manifold terrain indexes, conquers the limitation of the subjective cognition, as well as a low cost, apparently it could represent an applied foreground in the classification of macroscopic relief forms. Furthermore, it exhibits significance in consummating the theory and the methodology of DEMs on digital terrain analysis.

  13. Grain sedimentation with SPH-DEM and its validation

    NARCIS (Netherlands)

    Robinson, M.J.; Luding, Stefan; Ramaioli, Marco; Yu, A; Dong, K; Yang, R; Luding, S

    2013-01-01

    Our mesoscale simulation method [M. Robinson, S. Luding, and M. Ramaioli, submitted (2013)] for multiphase fluid-particle flows couples Smoothed Particle Hydrodynamics (SPH) and the Discrete Element Method (DEM) and enjoys the flexibility of meshless methods, such as being capable to handling free

  14. a High Precision dem Extraction Method Based on Insar Data

    Science.gov (United States)

    Wang, Xinshuang; Liu, Lingling; Shi, Xiaoliang; Huang, Xitao; Geng, Wei

    2018-04-01

    In the 13th Five-Year Plan for Geoinformatics Business, it is proposed that the new InSAR technology should be applied to surveying and mapping production, which will become the innovation driving force of geoinformatics industry. This paper will study closely around the new outline of surveying and mapping and then achieve the TerraSAR/TanDEM data of Bin County in Shaanxi Province in X band. The studying steps are as follows; Firstly, the baseline is estimated from the orbital data; Secondly, the interferometric pairs of SAR image are accurately registered; Thirdly, the interferogram is generated; Fourth, the interferometric correlation information is estimated and the flat-earth phase is removed. In order to solve the phase noise and the discontinuity phase existing in the interferometric image of phase, a GAMMA adaptive filtering method is adopted. Aiming at the "hole" problem of missing data in low coherent area, the interpolation method of low coherent area mask is used to assist the phase unwrapping. Then, the accuracy of the interferometric baseline is estimated from the ground control points. Finally, 1 : 50000 DEM is generated, and the existing DEM data is used to verify the accuracy through statistical analysis. The research results show that the improved InSAR data processing method in this paper can obtain the high-precision DEM of the study area, exactly the same with the topography of reference DEM. The R2 can reach to 0.9648, showing a strong positive correlation.

  15. ArcticDEM Year 3; Improving Coverage, Repetition and Resolution

    Science.gov (United States)

    Morin, P. J.; Porter, C. C.; Cloutier, M.; Howat, I.; Noh, M. J.; Willis, M. J.; Candela, S. G.; Bauer, G.; Kramer, W.; Bates, B.; Williamson, C.

    2017-12-01

    Surface topography is among the most fundamental data sets for geosciences, essential for disciplines ranging from glaciology to geodynamics. The ArcticDEM project is using sub-meter, commercial imagery licensed by the National Geospatial-Intelligence Agency, petascale computing, and open source photogrammetry software to produce a time-tagged 2m posting elevation model and a 5m posting mosaic of the entire Arctic region. As ArcticDEM enters its third year, the region has gone from having some of the sparsest and poorest elevation data to some of the most precise and complete data of any region on the globe. To date, we have produced and released over 80,000,000 km2 as 57,000 - 2m posting, time-stamped DEMs. The Arctic, on average, is covered four times though there are hotspots with more than 100 DEMs. In addition, the version 1 release includes a 5m posting mosaic covering the entire 20,000,000 km2 region. All products are publically available through arctidem.org, ESRI web services, and a web viewer. The final year of the project will consist of a complete refiltering of clouds/water and re-mosaicing of all elevation data. Since inception of the project, post-processing techniques have improved significantly, resulting in fewer voids, better registration, sharper coastlines, and fewer inaccuracies due to clouds. All ArcticDEM data will be released in 2018. Data, documentation, web services and web viewer are available at arcticdem.org

  16. Theoretical and experimental studies on the improvement of the time structure of the extracted electron beam from the stretcher ring ELSA; Theoretische und experimentelle Untersuchungen zur Verbesserung der Zeitstruktur des extrahierten Elektronenstrahls aus dem Stretcherring ELSA

    Energy Technology Data Exchange (ETDEWEB)

    Neckenig, M.

    1993-03-01

    The Electron Stretcher Accelerator ELSA of Bonn University is the first electron-pulse-stretcher-ring in the GeV-range. It delivers an external electron beam in the energy range from 500 MeV to 3.5 GeV, with a current between 10 pA and 100 nA, depending on the demands of the experiments. A synchrotron is used to preaccelerate the electrons to energies between 500 MeV and 1.8 GeV. In this energy-range, ELSA is used in the pure stretcher-mode, whereas for higher energies it is used as a post accelerator. For beam extraction, a third-integer resonance, driven by sextupoles, is applied. The problems, delimiting the duty-factor of the extracted beam in the pure stretcher-mode, have been investigated and solved. In this mode, duty-factors - measured by coincidence methods - of up to 55% have been reached, which are of the order of the theoretical limit for the applied extraction method of about 60%. (orig.) [Deutsch] Ziel dieser Arbeit war es, die Phaenomene, die das Tastverhaeltnis des aus ELSA extrahierten Strahles beeinflussen, zu verstehen. Aus dem gewonnenen Verstaendnis heraus sollten Massnahmen getroffen werden, um das Tastverhaeltnis zu verbessern. Die Effekte, die ein gutes Tastverhaeltnis in der Vergangenheit verhindert haben, waren in der Hauptsache ein Stromrippel in den Netzgeraeten der Hauptmagnete sowie die Extraktion aus dem Synchrotron, die nur eine schlechte Fuellung von ELSA erlaubte. Der Rippel wurde durch den Einbau von Filtern in die Netzgeraete behoben. Bei den gegenwaertigen Extraktionszeiten von 20 msec spielt der Rippel nur noch eine geringe Rolle. Die Extraktion aus dem Synchrotron wurde modifiziert, so dass ohne Beschaffung neuer Komponenten eine Verbesserung der ELSA-Fuellung von 40% auf maximal 75% moeglich wurde. Durch eine Reihe von Massnahmen konnte der Wert des Tastverhaeltnisses von 6%-7% kurz nach der Inbetriebnahme auf heute 50%-55% gesteigert werden. Die Extraktion kann durch ein einfaches Modell beschrieben werden, dass alle

  17. Hydraulic correction method (HCM) to enhance the efficiency of SRTM DEM in flood modeling

    Science.gov (United States)

    Chen, Huili; Liang, Qiuhua; Liu, Yong; Xie, Shuguang

    2018-04-01

    Digital Elevation Model (DEM) is one of the most important controlling factors determining the simulation accuracy of hydraulic models. However, the currently available global topographic data is confronted with limitations for application in 2-D hydraulic modeling, mainly due to the existence of vegetation bias, random errors and insufficient spatial resolution. A hydraulic correction method (HCM) for the SRTM DEM is proposed in this study to improve modeling accuracy. Firstly, we employ the global vegetation corrected DEM (i.e. Bare-Earth DEM), developed from the SRTM DEM to include both vegetation height and SRTM vegetation signal. Then, a newly released DEM, removing both vegetation bias and random errors (i.e. Multi-Error Removed DEM), is employed to overcome the limitation of height errors. Last, an approach to correct the Multi-Error Removed DEM is presented to account for the insufficiency of spatial resolution, ensuring flow connectivity of the river networks. The approach involves: (a) extracting river networks from the Multi-Error Removed DEM using an automated algorithm in ArcGIS; (b) correcting the location and layout of extracted streams with the aid of Google Earth platform and Remote Sensing imagery; and (c) removing the positive biases of the raised segment in the river networks based on bed slope to generate the hydraulically corrected DEM. The proposed HCM utilizes easily available data and tools to improve the flow connectivity of river networks without manual adjustment. To demonstrate the advantages of HCM, an extreme flood event in Huifa River Basin (China) is simulated on the original DEM, Bare-Earth DEM, Multi-Error removed DEM, and hydraulically corrected DEM using an integrated hydrologic-hydraulic model. A comparative analysis is subsequently performed to assess the simulation accuracy and performance of four different DEMs and favorable results have been obtained on the corrected DEM.

  18. Digital Elevation Model (DEM), The county-wide DEM is published with a 20-foot grid size, though we have a more detailed DEM/DTM for some parts of the county, particularly the Green Bay Metro area, Published in 2000, 1:4800 (1in=400ft) scale, Brown County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2000. The county-wide DEM is published with a 20-foot grid size, though we have a more detailed DEM/DTM for some...

  19. Accuracy of Cartosat-1 DEM and its derived attribute at multiple ...

    Indian Academy of Sciences (India)

    and information content was compared using mean elevation, variance and entropy statistics. Various ... required, but for local studies large scale represen- tation is ... been made to examine the effect of DEM accuracy ... accuracy of DEM is evaluated with respect to grid .... that loss of entropy is a measure of DEM quality or.

  20. Present evaluation of the use of rape oil/RME compared to diesel fuel. Appendix 1: Resources and emission balances: rape oil and RME compared to diesel fuel. Appendix 2: Economic evaluation of the use of rape oil and RME compared to diesel fuel; Aktuelle Bewertung des Einsatzes von Rapsoel/RME im Vergleich zu Dieselkraftstoff. Anhang 1: Ressourcen- und Emissionsbilanzen: Rapsoel und RME im Vergleich zu Dieselkraftstoff. Anhang 2: Oekonomische Bewertung des Einsatzes von Rapsoel und RME gegenueber Dieselkraftstoff

    Energy Technology Data Exchange (ETDEWEB)

    Kraus, K.; Niklas, G.; Tappe, M.; Reinhardt, G.A. [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany); Folkers, C. [Bochum Univ. (Germany). Lehrstuhl fuer Finanzwissenschaft

    1999-12-01

    Umweltwirkungen ueber den gesamten Lebenszyklus der rapsoelbasierten Kraftstoffe im Vergleich zu Dieselkraftstoff bilanziert. Die Einschraenkung auf diese Bereiche beruht darauf, dass hier die besonderen Umweltvorteile der Pflanzenoelkraftstoffe vermutet werden. Ferner konnten aufgrund der von der Deutschen Bundesstiftung Umwelt gefoerderten, juengst veroeffentlichten Studie 'Nachwachsende Energietraeger - Grundlagen, Verfahren, Oekologische Bilanzierung' aktuelle wesentliche Erkenntnisse, wie z.B. die Neubestimmung des Referenzsystems (Rotations- statt Dauerbrache), in dem Gutachten beruecksichtigt werden. Als besonders vorteilhaft fuer Rapsoel und RME gilt die Einsparung fossiler Energietraeger und die damit verbundene Minderung der Treibhausgase (vor allem CO{sub 2}). Die Treibhausgasemissionen zu reduzieren, ist eines der vorrangigen Ziele der nationalen und internationalen Umweltpolitik, um eine gefaehrliche anthropogene Stoerung des Klimas zu verhindern. (orig.)

  1. A comparative appraisal of hydrological behavior of SRTM DEM at catchment level

    Science.gov (United States)

    Sharma, Arabinda; Tiwari, K. N.

    2014-11-01

    The Shuttle Radar Topography Mission (SRTM) data has emerged as a global elevation data in the past one decade because of its free availability, homogeneity and consistent accuracy compared to other global elevation dataset. The present study explores the consistency in hydrological behavior of the SRTM digital elevation model (DEM) with reference to easily available regional 20 m contour interpolated DEM (TOPO DEM). Analysis ranging from simple vertical accuracy assessment to hydrological simulation of the studied Maithon catchment, using empirical USLE model and semidistributed, physical SWAT model, were carried out. Moreover, terrain analysis involving hydrological indices was performed for comparative assessment of the SRTM DEM with respect to TOPO DEM. Results reveal that the vertical accuracy of SRTM DEM (±27.58 m) in the region is less than the specified standard (±16 m). Statistical analysis of hydrological indices such as topographic wetness index (TWI), stream power index (SPI), slope length factor (SLF) and geometry number (GN) shows a significant differences in hydrological properties of the two studied DEMs. Estimation of soil erosion potentials of the catchment and conservation priorities of microwatersheds of the catchment using SRTM DEM and TOPO DEM produce considerably different results. Prediction of soil erosion potential using SRTM DEM is far higher than that obtained using TOPO DEM. Similarly, conservation priorities determined using the two DEMs are found to be agreed for only 34% of microwatersheds of the catchment. ArcSWAT simulation reveals that runoff predictions are less sensitive to selection of the two DEMs as compared to sediment yield prediction. The results obtained in the present study are vital to hydrological analysis as it helps understanding the hydrological behavior of the DEM without being influenced by the model structural as well as parameter uncertainty. It also reemphasized that SRTM DEM can be a valuable dataset for

  2. Die Behandlung des Akustikusneurinoms mit dem Gamma-Knife

    OpenAIRE

    Hempel, Elizabeta

    2005-01-01

    Das Akustikusneurinom ist mit ca. 6% der häufigste intrakranielle Tumor und hat eine jährliche Inzidenz von 1:100000. Die durchschnittliche Wachstumsrate beträgt 2 mm pro Jahr, wobei es auch Akustikusneurinome gibt, die sehr viel schneller wachsen können. Bei der Behandlung des Schwannoms stehen uns zwei Modalitäten zur Verfügung. Die konventionelle Chirurgie und die stereotaktische Radiochirurgie, zu der die Gamma-Knife Therapie und der Linearbeschleuniger zählen. Sorgfältig ausgesuchte P...

  3. DEM analysis of FOXSI-2 microflare using AIA observations

    Science.gov (United States)

    Athiray Panchapakesan, Subramania; Glesener, Lindsay; Vievering, Juliana; Camilo Buitrago-Casas, Juan; Christe, Steven; Inglis, Andrew; Krucker, Sam; Musset, Sophie

    2017-08-01

    The second flight of Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment was successfully completed on 11 December 2014. FOXSI makes direct imaging and spectral observation of the Sun in hard X-rays using grazing incidence optics modules which focus X-rays onto seven focal plane detectors kept at a 2m distance, in the energy range 4 to 20 keV, to study particle acceleration and coronal heating. Significant HXR emissions were observed by FOXSI during microflare events with A0.5 and A2.5 class, as classified by GOES, that occurred during FOXSI-2 flight.Spectral analysis of FOXSI data for these events indicate presence of plasma at higher temperatures (>10MK). We attempt to study the plasma content in the corona at different temperatures, characterized by the differential emission measure (DEM), over the FOXSI-2 observed flare regions using the Atmospheric Imaging Assembly (SDO/AIA) data. We utilize AIA observations in different EUV filters that are sensitive to ionized iron lines, to determine the DEM by using a regularized inversion method. This poster will show the properties of hot plasma as derived from FOXSI-2 HXR spectra with supporting DEM analysis using AIA observations.

  4. Rückwärtsintegration - Zu den Verhältnissen Gymnasium, Hochschule und Arbeitswelt

    Science.gov (United States)

    Schmid, Gerhard; Heppner, Winfried; Focht, Eva

    In seiner 2007 erschienen Sammlung von Vorträgen und Essays beschäftigt sich Wolfgang Frühwald, mit der Frage "Wieviel Wissen brauchen wir?“ [1] Die Kernproblematik moderner Wissenschaft und Forschung sieht der Autor, emeritierter Ordinarius für Neuere Deutsche Literaturwissenschaft und von 1992 bis 1997 Präsident der Deutschen Forschungsgemeinschaft, einerseits in der zunehmenden Spezialisierung der Wissenschaftsbereiche, andererseits in der Gefahr der Abkoppelung der Naturwissenschaften von den Geisteswissenschaften. Wiederholt plädiert er dafür, über der rasanten Entwicklung beispielsweise in der Biologie und Physik, die historische, gesellschaftliche und besonders die ethische Dimension der Forschung nicht zu übersehen und fordert eine übergeordnete Theorie der Wissenschaft, die nur im Dialog zwischen den einzelnen Fachgebieten zu entwickeln sei.

  5. Rezension zu: Rita Pawlowski (Hg.: „Unsere Frauen stehen ihren Mann“. Berlin: trafo Wissenschaftsverlag 2008

    Directory of Open Access Journals (Sweden)

    Susanne Freund

    2009-07-01

    Full Text Available Rita Pawlowski stellt in diesem Band in alphabethischer Ordnung insgesamt 651 Frauen vor, die Abgeordnete der Volkskammer der DDR waren. Nach einer knappen Einführung zur Wahlhäufigkeit weiblicher Abgeordneter, zum Frauenanteil in der Volkskammer und in den Ausschüssen geben die Biographen im Wesentlichen Auskunft über die soziale Herkunft, die Parteizugehörigkeit, die schulische und berufliche Ausbildung und die Berufstätigkeit der einzelnen Frauen. Ziel dieses Bandes ist die Dokumentation des außergewöhnlichen Engagements von Frauen in der DDR, neben Berufstätigkeit und Familienpflichten politische Einflussmöglichkeiten zu nutzen. Damit wird ein Teilaspekt der Lebensgeschichte dieser Frauen beleuchtet, der – wie die Autorin im Vorfeld einräumt – keinen Anspruch auf Vollständigkeit erhebt. Dieser Hinweis ist wichtig, um dieses lexikalische Nachschlagewerk sinnvoll zu handhaben.

  6. Web 2.0 Dienste als Ergänzung zu algorithmischen Suchmaschinen

    CERN Document Server

    Deutschland. Bundesministerium für Wirtschaft und Technologie; Maas, Christian

    2008-01-01

    Dokumentiert die Ergebnisse des Fachprojekts "Einbingung von Frage-Antwort-Diensten in die Web-Suche", Wintersemester 2007/2008, Dept. Information, Hochschule für angewandte Wissenschaften Hamburg. Mit sozialen Suchdiensten - wie z.B. Yahoo Clever, Lycos iQ oder Mister Wong - ist eine Ergänzung zu den bisherigen Ansätzen in der Web-Suche entstanden. Während Google und Co. automatisch generierte Trefferlisten bieten, binden soziale Suchdienste die Anwender zur Generierung der Suchergebnisse in den Suchprozess ein. Vor diesem Hintergrund wird in diesem Buch der Frage nachgegangen, inwieweit soziale Suchdienste mit traditionellen Suchmaschinen konkurrieren oder diese qualitativ ergänzen können. Der vorliegende Band beleuchtet die hier aufgeworfene Fragestellung aus verschiedenen Perspektiven, um auf die Bedeutung von sozialen Suchdiensten zu schließen.

  7. THE GLOBAL TANDEM-X DEM: PRODUCTION STATUS AND FIRST VALIDATION RESULTS

    Directory of Open Access Journals (Sweden)

    M. Huber

    2012-07-01

    Full Text Available The TanDEM-X mission will derive a global digital elevation model (DEM with satellite SAR interferometry. Two radar satellites (TerraSAR-X and TanDEM-X will map the Earth in a resolution and accuracy with an absolute height error of 10m and a relative height error of 2m for 90% of the data. In order to fulfill the height requirements in general two global coverages are acquired and processed. Besides the final TanDEM-X DEM, an intermediate DEM with reduced accuracy is produced after the first coverage is completed. The last step in the whole workflow for generating the TanDEM-X DEM is the calibration of remaining systematic height errors and the merge of single acquisitions to 1°x1° DEM tiles. In this paper the current status of generating the intermediate DEM and first validation results based on GPS tracks, laser scanning DEMs, SRTM data and ICESat points are shown for different test sites.

  8. Zum Entwicklungsstand und zu Entwicklungsproblemen unserer Jugend - 1987 : Forschungsergebnisse - Beobachtungen - Überlegungen in 10 Thesen

    OpenAIRE

    Friedrich, Walter

    1987-01-01

    Dieser Bericht gibt in zehn Thesen einen Überblick über Forschungsergebnisse, Beobachtungen und Überlegungen zum Entwicklungsstand der DDR-Jugend im Jahre 1987. Diese sei "in ihrer großen Mehrheit durch ein hohes Niveau ihrer sozialistischen Persönlichkeitsentwicklung charakterisiert". Kritisiert wird die Rolle der FDJ, die die Interessenvertretung der Jugend nicht ausreichend wahrnehme. Weiterhin nehme die Rezeption westlicher Rundfunk- und Fernsehsendungen immer mehr zu, jedoch sei es verbo...

  9. Verzwickte Flussgemeinschaft - Warum es so schwierig ist, den Flüssen Raum zu geben

    NARCIS (Netherlands)

    Hartmann, T.

    2011-01-01

    Extreme Hochwasser verursachen enorme Schäden in Flusslandschaften. Flussgemeinschaften müssen künftig den Flüssen mehr Raum geben, um Hochwasser in der Fläche zurückzuhalten, statt in der Höhe (der Deiche) zu bekämpfen. Die Idee „den Flüssen mehr Raum geben“ beschreibt eigentlich etwas

  10. Untersuchungen zu mummy, kette und Interaktionspartnern bei der Entwicklung des Drosophila Nervensystems

    OpenAIRE

    Strunk, J.M. (Judith)

    2006-01-01

    Die Dissertation beinhaltet genetische, funktionelle und phänotypische Analysen von Mutationen, die zu Defekten der Musterbildung des embryonalen ZNS von Drosophila melanogaster führen. Das Gen mummy wurde im Bereich 26D7 lokalisiert und codiert eine UDP-N-ACETYLGLUCOSAMIN-PYROPHOSPHORYLASE. MUMMY katalysiert eine Reaktion, deren Produkt, das UDP-N-Acetylglucosamin, Grundbaustein für Glycosylierung und GPI-Ankersynthese ist. Effekte von mummy auf diese Prozesse konnten dargestellt werden. Für...

  11. Von der Europäischen Rechtsgeschichte zu einer Rechtsgeschichte Europas in globalhistorischer Perspektive

    Directory of Open Access Journals (Sweden)

    Thomas Duve

    2012-01-01

    In den letzten Jahren sind im Zuge der Diskussion um postkoloniale Perspektiven auf die Geschichte, um Transnationale und Globalgeschichte, viele Grundlagen der traditionellen Europahistoriographie kritisiert und massiv erschüttert worden. Das wirft Fragen auch an die Europäische Rechtsgeschichte auf: Welches Europabild liegt ihr zu Grunde? Auf welchen intellektuellen und konzeptionellen Grundlagen beruht sie? Wie antwortet sie auf die Vorwürfe des Eurozentrismus, des epistemischen Kolonialismus, wie auf die Forderung, Europa zu ›provinzialisieren‹? Wie definiert sie das Verhältnis der Europäischen zur Transnationalen und Globalen Rechtsgeschichte? – Diesen und ähnlichen Fragen wenden sich die folgenden Überlegungen zu. Der Schwerpunkt liegt auf einer Auseinandersetzung mit der Tradition, ihren konzeptionellen Grundlagen und deren wissenschaftshistorischem Kontext (1. Teil, 1.–6.. Aus dieser kritischen Bestandsaufnahme und den Ergebnissen der Debatte um Globalgeschichte ergeben sich Ausgangspunkte und Aufgaben einer in Vielem auf den Leistungen der Disziplin aufbauenden, doch notwendigerweise auf einer anderen Konzeption beruhenden Rechtsgeschichte Europas in globalhistorischer Perspektive (2. Teil, 7.–11..

  12. Modelling above Ground Biomass in Tanzanian Miombo Woodlands Using TanDEM-X WorldDEM and Field Data

    Directory of Open Access Journals (Sweden)

    Stefano Puliti

    2017-09-01

    Full Text Available The use of Interferometric Synthetic Aperture Radar (InSAR data has great potential for monitoring large scale forest above ground biomass (AGB in the tropics due to the increased ability to retrieve 3D information even under cloud cover. To date; results in tropical forests have been inconsistent and further knowledge on the accuracy of models linking AGB and InSAR height data is crucial for the development of large scale forest monitoring programs. This study provides an example of the use of TanDEM-X WorldDEM data to model AGB in Tanzanian woodlands. The primary objective was to assess the accuracy of a model linking AGB with InSAR height from WorldDEM after the subtraction of ground heights. The secondary objective was to assess the possibility of obtaining InSAR height for field plots when the terrain heights were derived from global navigation satellite systems (GNSS; i.e., as an alternative to using airborne laser scanning (ALS. The results revealed that the AGB model using InSAR height had a predictive accuracy of R M S E = 24.1 t·ha−1; or 38.8% of the mean AGB when terrain heights were derived from ALS. The results were similar when using terrain heights from GNSS. The accuracy of the predicted AGB was improved when compared to a previous study using TanDEM-X for a sub-area of the area of interest and was of similar magnitude to what was achieved in the same sub-area using ALS data. Overall; this study sheds new light on the opportunities that arise from the use of InSAR data for large scale AGB modelling in tropical woodlands.

  13. [Von den Restgütern zu den Sowchosen in Estland 1939-1953. Dokumentensammlung] / Olev Liivik

    Index Scriptorium Estoniae

    Liivik, Olev, 1975-

    2011-01-01

    Arvustus: Von den Restgütern zu den Sowchosen in Estland 1939-1953 : Dokumentensammlung / Hrsg. von David Feest, Karsten Brüggemann. Berlin : Lit Verlag, 2010. (Schriften der Baltischen historischen Kommission ; Bd. 15)

  14. Der Meteorologe : (aus dem Band "V". Tallinn 1998) / Elo Viiding ; aus dem Estnischen von Gisbert Jänicke

    Index Scriptorium Estoniae

    Viiding, Elo, 1974-

    2002-01-01

    Sisu : Die Möglichkeit des Meteorologen = Meteoroloogi võimalikkusest ; "Der Meteorologe kam 1990 in die Stadt..." = "Meteoroloog saabus linna aastal 1990..." ; "Was wäre dir "Arbeit" des Meteorologen..." = "Mis oleks meteoroloogi töö..." ; "Und ein Unglück für den Meteorologen ist es auch..." = "Ja Meteoroloogi õnnetus on veel see..." ; Angst vor dem Altwerden des Meteorologen = Hirm Meteoroloogi vanakssaamise ees ; Fest. Geschenk = Pidu. Kink ; "Wenn der Meteorologe eine Grösse sieht, ist er darüber..." = "Kui meteoroloog näeb suurust, on ta selle kohal..." ; Der Meteorologe wird im Saal erwartet = Meteoroloogi oodatakse saali ; "Das Abkommen mit der Meteorologenerwartung kündigen..." = "Katkestada leping meteoroloogiootusega..." ; "Die "Wege des Herrn" sind der Meteorologe..." = "Looja tee" on Meteoroloog..." ; Von dem Fremden, der im Saal den Meteorologen traf = Võõra lugu, kes Meteoroloogi saalis kohtas ; "Den Fremden hervorzuhusten, der von dem..." = "Köhida enesest välja võõras, kes tahtis teha..." ; Der Fremde beruhigt sich nicht = Võõras ei jää rahule

  15. [Julia Rosche. Zwischen den Fronten. Die Rolle Estlands zwischen dem Hitler-Stalin-Pakt und dem Ende des Zweiten Weltkriegs im internationalen Kontext] / Olaf Mertelsmann

    Index Scriptorium Estoniae

    Mertelsmann, Olaf, 1969-

    2014-01-01

    Arvustus: Rosche, Julia. Zwischen den Fronten. Die Rolle Estlands zwischen dem Hitler-Stalin-Pakt und dem Ende des Zweiten Weltkriegs im internationalen Kontext. Diplomica Verlag. Hamburg 2012. Unter demselben Titel mit identischem Text auch: Grin Verlag. München 2013

  16. Nemški Pavliha im Vergleich zu seiner Vorlage Tyll Eulenspiegels wunderbare und seltsame Historien

    Directory of Open Access Journals (Sweden)

    Marija Javor Briški

    2017-12-01

    Full Text Available Unter Berücksichtigung des soziohistorischen Hintergrundes der Zielleser befasst sich der Beitrag auf inhaltlicher, struktureller, medialer und phraseologischer Ebene mit dem Vergleich der slowenischen Übersetzung Nemški Pavliha und seiner wiederentdeckten Vorlage Tyll Eulenspiegels wunderbare und seltsame Historien.

  17. Research on a dem Coregistration Method Based on the SAR Imaging Geometry

    Science.gov (United States)

    Niu, Y.; Zhao, C.; Zhang, J.; Wang, L.; Li, B.; Fan, L.

    2018-04-01

    Due to the systematic error, especially the horizontal deviation that exists in the multi-source, multi-temporal DEMs (Digital Elevation Models), a method for high precision coregistration is needed. This paper presents a new fast DEM coregistration method based on a given SAR (Synthetic Aperture Radar) imaging geometry to overcome the divergence and time-consuming problem of the conventional DEM coregistration method. First, intensity images are simulated for two DEMs under the given SAR imaging geometry. 2D (Two-dimensional) offsets are estimated in the frequency domain using the intensity cross-correlation operation in the FFT (Fast Fourier Transform) tool, which can greatly accelerate the calculation process. Next, the transformation function between two DEMs is achieved via the robust least-square fitting of 2D polynomial operation. Accordingly, two DEMs can be precisely coregistered. Last, two DEMs, i.e., one high-resolution LiDAR (Light Detection and Ranging) DEM and one low-resolution SRTM (Shutter Radar Topography Mission) DEM, covering the Yangjiao landslide region of Chongqing are taken as an example to test the new method. The results indicate that, in most cases, this new method can achieve not only a result as much as 80 times faster than the minimum elevation difference (Least Z-difference, LZD) DEM registration method, but also more accurate and more reliable results.

  18. Research on the method of extracting DEM based on GBInSAR

    Science.gov (United States)

    Yue, Jianping; Yue, Shun; Qiu, Zhiwei; Wang, Xueqin; Guo, Leping

    2016-05-01

    Precise topographical information has a very important role in geology, hydrology, natural resources survey and deformation monitoring. The extracting DEM technology based on synthetic aperture radar interferometry (InSAR) obtains the three-dimensional elevation of the target area through the phase information of the radar image data. The technology has large-scale, high-precision, all-weather features. By changing track in the location of the ground radar system up and down, it can form spatial baseline. Then we can achieve the DEM of the target area by acquiring image data from different angles. Three-dimensional laser scanning technology can quickly, efficiently and accurately obtain DEM of target area, which can verify the accuracy of DEM extracted by GBInSAR. But research on GBInSAR in extracting DEM of the target area is a little. For lack of theory and lower accuracy problems in extracting DEM based on GBInSAR now, this article conducted research and analysis on its principle deeply. The article extracted the DEM of the target area, combined with GBInSAR data. Then it compared the DEM obtained by GBInSAR with the DEM obtained by three-dimensional laser scan data and made statistical analysis and normal distribution test. The results showed the DEM obtained by GBInSAR was broadly consistent with the DEM obtained by three-dimensional laser scanning. And its accuracy is high. The difference of both DEM approximately obeys normal distribution. It indicated that extracting the DEM of target area based on GBInSAR is feasible and provided the foundation for the promotion and application of GBInSAR.

  19. A coupled DEM-CFD method for impulse wave modelling

    Science.gov (United States)

    Zhao, Tao; Utili, Stefano; Crosta, GiovanBattista

    2015-04-01

    Rockslides can be characterized by a rapid evolution, up to a possible transition into a rock avalanche, which can be associated with an almost instantaneous collapse and spreading. Different examples are available in the literature, but the Vajont rockslide is quite unique for its morphological and geological characteristics, as well as for the type of evolution and the availability of long term monitoring data. This study advocates the use of a DEM-CFD framework for the modelling of the generation of hydrodynamic waves due to the impact of a rapid moving rockslide or rock-debris avalanche. 3D DEM analyses in plane strain by a coupled DEM-CFD code were performed to simulate the rockslide from its onset to the impact with still water and the subsequent wave generation (Zhao et al., 2014). The physical response predicted is in broad agreement with the available observations. The numerical results are compared to those published in the literature and especially to Crosta et al. (2014). According to our results, the maximum computed run up amounts to ca. 120 m and 170 m for the eastern and western lobe cross sections, respectively. These values are reasonably similar to those recorded during the event (i.e. ca. 130 m and 190 m respectively). In these simulations, the slope mass is considered permeable, such that the toe region of the slope can move submerged in the reservoir and the impulse water wave can also flow back into the slope mass. However, the upscaling of the grains size in the DEM model leads to an unrealistically high hydraulic conductivity of the model, such that only a small amount of water is splashed onto the northern bank of the Vajont valley. The use of high fluid viscosity and coarse grain model has shown the possibility to model more realistically both the slope and wave motions. However, more detailed slope and fluid properties, and the need for computational efficiency should be considered in future research work. This aspect has also been

  20. A new subsidy regulation for coal after 2002 on the basis of the EC treaty; Eine neue Beihilferegelung fuer die Steinkohle nach dem Jahr 2002 auf der Basis des EG-Vertrags

    Energy Technology Data Exchange (ETDEWEB)

    Reichel, W. [Gesamtverband des Deutschen Steinkohlenbergbaus, Essen (Germany)

    2000-08-10

    Coal is and will remain the most important indigenous energy resource in Europe. Hence, an appropriate ECSC regulation must be drawn up for coal subsidies in the EC Treaty after 2002 to enable a core mining industry based on the long-term safeguarding of supply. This is primarily not a legal, but a political question. Neither Kyoto nor the expansion of natural gas or image problems militate against coal. Its future contribution to the energy mix requires above all advances in technology. (orig.) [German] Die Kohle ist und bleibt die wichtigste heimische Energieressource Europas. Fuer die Kohlenbeihilfen muss daher ab dem Jahr 2002 eine adaequate EGKS-Nachfolgeregelung im Rahmen des EG-Vertrags getroffen werden, um einen mit der langfristigen Versorgungssicherung begruendeten Kernbergbau zu ermoeglichen. Dies ist primaer keine rechtliche, sondern eine politische Frage. Weder Kyoto noch die Erdgasexpansion oder Imageprobleme sprechen grundsaetzlich gegen die Kohle. Ihr zukuenftiger Beitrag zum Energiemix erfordert vor allem eine Technikoffensive. (orig.)

  1. 3D DEM analyses of the 1963 Vajont rock slide

    Science.gov (United States)

    Boon, Chia Weng; Houlsby, Guy; Utili, Stefano

    2013-04-01

    The 1963 Vajont rock slide has been modelled using the distinct element method (DEM). The open-source DEM code, YADE (Kozicki & Donzé, 2008), was used together with the contact detection algorithm proposed by Boon et al. (2012). The critical sliding friction angle at the slide surface was sought using a strength reduction approach. A shear-softening contact model was used to model the shear resistance of the clayey layer at the slide surface. The results suggest that the critical sliding friction angle can be conservative if stability analyses are calculated based on the peak friction angles. The water table was assumed to be horizontal and the pore pressure at the clay layer was assumed to be hydrostatic. The influence of reservoir filling was marginal, increasing the sliding friction angle by only 1.6˚. The results of the DEM calculations were found to be sensitive to the orientations of the bedding planes and cross-joints. Finally, the failure mechanism was investigated and arching was found to be present at the bend of the chair-shaped slope. References Boon C.W., Houlsby G.T., Utili S. (2012). A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, vol 44, 73-82, doi.org/10.1016/j.compgeo.2012.03.012. Kozicki, J., & Donzé, F. V. (2008). A new open-source software developed for numerical simulations using discrete modeling methods. Computer Methods in Applied Mechanics and Engineering, 197(49-50), 4429-4443.

  2. Optimization of Particle Search Algorithm for CFD-DEM Simulations

    Directory of Open Access Journals (Sweden)

    G. Baryshev

    2013-09-01

    Full Text Available Discrete element method has numerous applications in particle physics. However, simulating particles as discrete entities can become costly for large systems. In time-driven DEM simulation most computation time is taken by contact search stage. We propose an efficient collision detection method which is based on sorting particles by their coordinates. Using multiple sorting criteria allows minimizing number of potential neighbours and defines fitness of this approach for simulation of massive systems in 3D. This method is compared to a common approach that consists of placing particles onto a grid of cells. Advantage of the new approach is independence of simulation parameters upon particle radius and domain size.

  3. The Importance of Precise Digital Elevation Models (DEM) in Modelling Floods

    Science.gov (United States)

    Demir, Gokben; Akyurek, Zuhal

    2016-04-01

    Digital elevation Models (DEM) are important inputs for topography for the accurate modelling of floodplain hydrodynamics. Floodplains have a key role as natural retarding pools which attenuate flood waves and suppress flood peaks. GPS, LIDAR and bathymetric surveys are well known surveying methods to acquire topographic data. It is not only time consuming and expensive to obtain topographic data through surveying but also sometimes impossible for remote areas. In this study it is aimed to present the importance of accurate modelling of topography for flood modelling. The flood modelling for Samsun-Terme in Blacksea region of Turkey is done. One of the DEM is obtained from the point observations retrieved from 1/5000 scaled orthophotos and 1/1000 scaled point elevation data from field surveys at x-sections. The river banks are corrected by using the orthophotos and elevation values. This DEM is named as scaled DEM. The other DEM is obtained from bathymetric surveys. 296 538 number of points and the left/right bank slopes were used to construct the DEM having 1 m spatial resolution and this DEM is named as base DEM. Two DEMs were compared by using 27 x-sections. The maximum difference at thalweg of the river bed is 2m and the minimum difference is 20 cm between two DEMs. The channel conveyance capacity in base DEM is larger than the one in scaled DEM and floodplain is modelled in detail in base DEM. MIKE21 with flexible grid is used in 2- dimensional shallow water flow modelling. The model by using two DEMs were calibrated for a flood event (July 9, 2012). The roughness is considered as the calibration parameter. From comparison of input hydrograph at the upstream of the river and output hydrograph at the downstream of the river, the attenuation is obtained as 91% and 84% for the base DEM and scaled DEM, respectively. The time lag in hydrographs does not show any difference for two DEMs and it is obtained as 3 hours. Maximum flood extents differ for the two DEMs

  4. Sick building syndrome - results of the 'Proklima' research project; Befindlichkeitsstoerungen in Buerogebaeuden - Ergebnisse aus dem Proklima Forschungsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Kruppa, B. [Bundesindustrieverband Heizungs-, Klima-, Sanitaertechnik und Technische Gebaeudesysteme e.V., Bonn (Germany); Bischof, W.; Brasche, S. [Arbeitsgruppe Raumklimatologie der FSU Jena (ARK), Erfurt (Germany); Bullinger-Naber, M. [Hamburg Univ. (Germany). Abt. fuer Medizinische Psychologie; Mayer, E. [Fraunhofer-Institut fuer Bauphysik, Holzkirchen (Germany); Gebhardt, H. [Wuppertal Univ. (Gesamthochschule) (Germany). Inst. fuer Arbeitsmedizin, Sicherheitstechnik und Ergonomie

    2000-07-01

    In the world's biggest research project, the sick building syndrome was investigated in Germany between 1995 and 1999. In all, 8 air-conditioned buildings and 6 non-air-conditioned buildings, 40 space HVAC systems and 1497 places of work were analyzed, and 4,500 persons were asked to provide data. For the first time ever, measured physical, biological and chemical data were compared with the subjective data provided by the inquiry forms. It was found that the concentrations and hygienic status of air conditioning systems do have an effect on subjective comfort. Buildings with well-designed and well-serviced space HVAC systems had better results than buildings without air conditioning systems. However, it is the psychosocial environment and the job description of building inhabitants that decide their response in terms of sick building syndrome. Factors like gender, job satisfaction, job specifications and educational level are more important than space HVAC systems. [German] Im Rahmen eines der weltweit groessten Forschungsprojekte zum Thema 'Sick Building Syndrome' wurden in Deutschland zwischen 1995 und 1999 umfangreiche Untersuchungen durchgefuehrt mit dem Ziel, die Ursachen und Folgen von Befindlichkeitsstoerungen in Buerogebaeuden zu ermitteln. Insgesamt wurden 8 klimatisierte und 6 nicht klimatisierte Gebaeude, 40 raumlufttechnische Anlagen und 1497 Arbeitsplaetze untersucht sowie ueber 4.500 Personen befragt. Die Ergebnisse erlauben zum ersten Mal einen direkten Vergleich der gemessenen physikalischen, biologischen und chemischen Werte mit den subjektiven Angaben (Fragebogendaten) an klimatisierten und nicht klimatisierten Arbeitsplaetzen. Die Auswertung zeigt, dass die Konzentration der Anlagen und deren hygienischer Wartungszustand einen Einfluss auf die Befindlichkeit der Mitarbeiter haben. Gebaeude mit gut geplanten und gewarteten RLT-Anlagen schneiden in der Bewertung sogar besser ab als nicht klimatisierte Gebaeude. Die groessten

  5. Socio-political Turmoil in Mali: The Public Debate Following the Coup d’État on 22 March 2012 Sozio-politische Turbulenzen in Mali: Die öffentliche Debatte nach dem Staatsstreich vom 22. März 2012

    Directory of Open Access Journals (Sweden)

    Sten Hagberg

    2012-01-01

    Full Text Available During the night between 21 and 22 March 2012, a group of young military officers overthrew Mali’s president, Amadou Toumani Touré. The group justified the coup by citing the inability of the regime to both deal with the crisis in the North and provide the army with the appropriate material and manpower to defend the national territory. The coup plunged Mali into violence, and caused a de facto partition of the country. The socio-political turmoil pitting different political and armed factions against each other has continued unabated and has been accompanied by intense mass media debates. In this report we focus on the Malian public debate. By looking at the political class, the international community, and the partition of the country, we analyse representations and stereotypes prevailing in this debate.In der Nacht vom 21. zum 22. März 2012 wurde der Präsident Malis, Amadou Toumani Touré, durch eine Gruppe junger Offiziere gestürzt. Die Gruppe rechtfertigte den Putsch, indem sie auf die Unfähigkeit des Regimes verwies, die Krise im Norden zu bewältigen und die Armee personell und materiell angemessen auszustatten, um die Grenzen das Landes verteidigen zu können. Der Staatsstreich stürzte Mali in eine gewaltsame Auseinandersetzung und führte zu einer faktischen Teilung des Landes. Die sozio-politischen Turbulenzen, in denen verschiedene politische und bewaffnete Gruppierungen gegeneinander antraten, haben seither unvermindert angehalten und wurden von intensiven Debatten in den Massenmedien begleitet. Der vorliegende Bericht konzentriert sich auf die öffentliche Debatte in Mali. Vor dem Hintergrund der politischen Entwicklung des Landes, der Positionen der internationalen Gemeinschaft und der Ursachen für die Teilung des Landes stellen die Autoren die Darstellungsweisen und Stereotypen dar, die in dieser Debatte Verwendung finden.

  6. GPU based contouring method on grid DEM data

    Science.gov (United States)

    Tan, Liheng; Wan, Gang; Li, Feng; Chen, Xiaohui; Du, Wenlong

    2017-08-01

    This paper presents a novel method to generate contour lines from grid DEM data based on the programmable GPU pipeline. The previous contouring approaches often use CPU to construct a finite element mesh from the raw DEM data, and then extract contour segments from the elements. They also need a tracing or sorting strategy to generate the final continuous contours. These approaches can be heavily CPU-costing and time-consuming. Meanwhile the generated contours would be unsmooth if the raw data is sparsely distributed. Unlike the CPU approaches, we employ the GPU's vertex shader to generate a triangular mesh with arbitrary user-defined density, in which the height of each vertex is calculated through a third-order Cardinal spline function. Then in the same frame, segments are extracted from the triangles by the geometry shader, and translated to the CPU-side with an internal order in the GPU's transform feedback stage. Finally we propose a "Grid Sorting" algorithm to achieve the continuous contour lines by travelling the segments only once. Our method makes use of multiple stages of GPU pipeline for computation, which can generate smooth contour lines, and is significantly faster than the previous CPU approaches. The algorithm can be easily implemented with OpenGL 3.3 API or higher on consumer-level PCs.

  7. Effect of aging in HDPE blended with DEM in decalin

    International Nuclear Information System (INIS)

    Silva, P.; Albano, C.; Karam, A.; Vargas, M.G.; Perera, R.

    2006-01-01

    Electron paramagnetic resonance (EPR) was used to study the effect of aging on irradiated samples of high-density polyethylene (HDPE) blended with diethyl maleate (DEM) in different proportions. Initially, we synthesize the HDPE using bis-(cyclopentadienyl) zirconium dichloride and P-MAO. The functionalization of the synthesized HDPE was carried out in a 10% weight/vol of polyethylene in decalin solution using different percentages of diethyl maleate (5, 10, 15 and 30% in weight). The samples were irradiated at 5, 15 and 30 kGy. An exponential decay in the total free radicals concentration was observed in the pure HDPE sample at the 15 and 30 kGy irradiation doses, as it was expected. For the 15 and 30 kGy irradiation doses the HDPE blended with 15 and 30% of DEM in decalin shows an increase in the total free radical concentrations as the storage time is increased. This behavior has been interpreted in terms of trapped free radicals. (Author)

  8. Multi-scale sensitivity analysis of pile installation using DEM

    Science.gov (United States)

    Esposito, Ricardo Gurevitz; Velloso, Raquel Quadros; , Eurípedes do Amaral Vargas, Jr.; Danziger, Bernadete Ragoni

    2017-12-01

    The disturbances experienced by the soil due to the pile installation and dynamic soil-structure interaction still present major challenges to foundation engineers. These phenomena exhibit complex behaviors, difficult to measure in physical tests and to reproduce in numerical models. Due to the simplified approach used by the discrete element method (DEM) to simulate large deformations and nonlinear stress-dilatancy behavior of granular soils, the DEM consists of an excellent tool to investigate these processes. This study presents a sensitivity analysis of the effects of introducing a single pile using the PFC2D software developed by Itasca Co. The different scales investigated in these simulations include point and shaft resistance, alterations in porosity and stress fields and particles displacement. Several simulations were conducted in order to investigate the effects of different numerical approaches showing indications that the method of installation and particle rotation could influence greatly in the conditions around the numerical pile. Minor effects were also noted due to change in penetration velocity and pile-soil friction. The difference in behavior of a moving and a stationary pile shows good qualitative agreement with previous experimental results indicating the necessity of realizing a force equilibrium process prior to any load-test to be simulated.

  9. Idle load losses of an injection-lubricated spur gear drive; Untersuchungen zu den Leerlaufverlusten eines einspritzgeschmierten Stirnradgetriebes

    Energy Technology Data Exchange (ETDEWEB)

    Dick, A.K.

    2000-07-01

    Arbeitsmaschine in Reihe geschaltet sind, wirkt sich dies direkt auf den Wirkungsgrad der Anlage aus. Mit dem im Rahmen dieser Arbeit gebauten Pruefstand wurde die Druckabhaengigkeit der lastunabhaengigen Verzahnungsverluste eines Stirnradpaares bis zu Umfangsgeschwindigkeiten von v{sub t}=200 m/s fuer Druecke von p{sub G}=0.13 bar / 1.4 bar ermittelt. Die gemessenen Ventilations- und Quetschverluste sind linear vom Druck abhaengig. Die aus bekannten Potenzansaetze zur Berechnung der lastunabhaengigen Verzahnungsverluste wurden bezueglich der Impulsverluste korrigiert. Ausserdem wurde der Faktor F{sub Druck} zur Beschreibung der Druckabhaengigkeit von Ventilations- und Quetschverlusten neu eingefuehrt. Die Stroemungsvorgaenge im Getriebegehaeuse beeinflussen die lastunabhaengigen Verluste. Durch das Teilvakuum werden die Stroemungsvorgaenge im Getriebe veraendert. Aehnliche Effekte koennen u.U. durch eine enge Kapselung der Rotoren erzielt werden. Die Versuchsergebnisse zeigen, dass das Potential fuer eine weitere Verlustreduzierung bei niedrigen Druecken gering ist. Da jedoch auch in Zukunft Turbogetriebe bei Atmosphaerendruck betrieben werden, sollte der Einfluss von eng anliegenden Getriebegehaeusen untersucht werden. (orig./AKF)

  10. Optimizing digital elevation models (DEMs) accuracy for planning and design of mobile communication networks

    Science.gov (United States)

    Hassan, Mahmoud A.

    2004-02-01

    Digital elevation models (DEMs) are important tools in the planning, design and maintenance of mobile communication networks. This research paper proposes a method for generating high accuracy DEMs based on SPOT satellite 1A stereo pair images, ground control points (GCP) and Erdas OrthoBASE Pro image processing software. DEMs with 0.2911 m mean error were achieved for the hilly and heavily populated city of Amman. The generated DEM was used to design a mobile communication network resulted in a minimum number of radio base transceiver stations, maximum number of covered regions and less than 2% of dead zones.

  11. DEM Resolution Impact on the Estimation of the Physical Characteristics of Watersheds by Using SWAT

    Directory of Open Access Journals (Sweden)

    Waranyu Buakhao

    2016-01-01

    Full Text Available A digital elevation model (DEM is an important spatial input for automatic extraction of topographic parameters for the soil and water assessment tool (SWAT. The objective of this study was to investigate the impact of DEM resolution (from 5 to 90 m on the delineation process of a SWAT model with two types of watershed characteristics (flat area and mountain area and three sizes of watershed area (about 20,000, 200,000, and 1,500,000 hectares. The results showed that the total lengths of the streamline, main channel slope, watershed area, and area slope were significantly different when using the DEM datasets to delineate. Delineation using the SRTM DEM (90 m, ASTER DEM (30 m, and LDD DEM (5 m for all watershed characteristics showed that the watershed sizes and shapes obtained were only slightly different, whereas the area slopes obtained were significantly different. The total lengths of the generated streams increased when the resolution of the DEM used was higher. The stream slopes obtained using the small area sizes were insignificant, whereas the slopes obtained using the large area sizes were significantly different. This suggests that water resource model users should use the ASTER DEM as opposed to a finer resolution DEM for model input to save time for the model calibration and validation.

  12. Envolving the Operations of the TerraSAR-X/TanDEM-X Mission Planning System during the TanDEM-X Science Phase

    OpenAIRE

    Stathopoulos, Fotios; Guillermin, Guillaume; Garcia Acero, Carlos; Reich, Karin; Mrowka, Falk

    2016-01-01

    After the successful Global Coverage of the Digital Elevation Model, the TanDEM-X Science phase was initiated in September of 2014, dedicated to the demonstration of innovative techniques and experiments. The TanDEM-X Science phase had a large impact on the TerraSAR-X/TanDEM-X Mission Planning System. The two main challenges were the formation flying changes and the activation of a new acquisition mode, the so called Dual Receive Antenna (DRA) acquisition mode. This paper describes all action...

  13. Viele Daten, hohe Hürden: eine Bilanz aus dem Projekt Open-Access-Statistik

    OpenAIRE

    Herb, Ulrich

    2018-01-01

    Dieser Artikel referiert die Ergebnisse des Projekts Open-Access-Statistik, dessen Ziel es war, standardisierte Nutzungszahlen für wissenschaftliche Dokumente zu erheben. Die gesammelten Nutzungsdaten sollten in erster Linie dazu dienen, Impact-Werte für Open-Access-Dokumente zu ermitteln. Das Projekt sah auch die Implementierung anspruchsvollerer Verfahren wie Netzwerk-Analysen vor, sah sich jedoch mit komplexen rechtlichen Anforderungen konfrontiert. Der Beitrag versucht überdies, Open-Acce...

  14. Experimentelle und bioinformatische Analyse der aeroben anoxygenen Photosynthese in dem photoheterotrophen Meeresbakterium Dinoroseobacter shibae DFL12

    OpenAIRE

    Tomasch, Jürgen Martin

    2011-01-01

    Bakterielle aerobe anoxygene Photosynthese (AAP) ist ein bedeutenter Mechanismus zur Energiegewinnung in marinen Habitaten. Sie trägt bis zu 5% zum photosynthetischen Elektronentransport an der Oberfläche der Ozeane bei. In dieser Arbeit wurde Dinoroseobacter shibae, ein Vertreter der global verbreiteten marinen Roseobacter-Gruppe genutzt um die Antwort des Transkriptoms auf eine Veränderung der Lichtverhältnisse zu untersuchen. Hierfür wurde kontinuierliche Kultivierung im Chemostat in Kombi...

  15. Dolmetscher/inneneinsatz in der qualitativen Sozialforschung. Zu Anforderungen und Auswirkungen in gedolmetschten Interviews

    Directory of Open Access Journals (Sweden)

    Gwendolin Lauterbach

    2014-03-01

    Full Text Available Der Einsatz von Dolmetscher/innen in der qualitativen Sozialforschung, insbesondere in qualitativen Interviews, stand bisher nicht im Mittelpunkt der Forschung, stellt jedoch die Interviewteilnehmer/innen vor Herausforderungen. Diese betreffen v.a. den Umgang mit dem Dolmetscher/der Dolmetscherin und deren Rolle sowie die Interviewauswertung und die Qualität der Daten und folgenden wissenschaftlichen Erkenntnisse. Aus der bisherigen Diskussion lassen sich nur bedingt methodische Leitlinien aus anderen, verwandten Bereichen ableiten. Anhand von Expert/inneninterviews mit Forscher/innen und Dolmetscher/innen werden daher Erfahrungen mit dem Dolmetscher/inneneinsatz in der qualitativen Sozialforschung dokumentiert und Handlungsempfehlungen abgeleitet. Mithilfe von Gesprächsaufzeichnungen gedolmetschter Interviews werden die Aushandlungen zwischen Originalen und Dolmetschungen aufgezeigt sowie Auswirkungen des Dolmetscher/inneneinsatzes auf den Interviewprozess dargelegt. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs140250

  16. Neue Medien in der Lehrerausbildung. Zu angemessenen (und unangemessenen Zielen und Inhalten des Lehramtsstudiums

    Directory of Open Access Journals (Sweden)

    Sigrid Blömeke

    2003-01-01

    Full Text Available In vier Schritten wird dem Verhältnis von Lehrerausbildung und neuen Medien nachgegangen. Zunächst werden grundsätzliche medienpädagogische Aufgaben der Lehrerausbildung herausgearbeitet, bevor das Ausbildungsprofil ihrer ersten und zweiten Phase in den Blick genommen wird. Ausgangspunkt der Theoriebildung sind professions- und institutionentheoretische Ansätze, die auf die neuen Medien bezogen werden; Konkretisierungen erfolgen an Beispielen aus der Germanistik, der Anglistik, der Geschichte und der Mathematik. Anschliessend wird der Erwerb medienpädagogischer Kompetenz durch zukünftige Lehrerinnen und Lehrer von dem Erwerb basaler Medienkompetenz als eines Elements von Allgemeinbildung abgegrenzt. Zum Schluss werden Konsequenzen für die strukturelle Gestaltung der Lehrerausbildung gezogen.

  17. Abfallentsorgung zu Lasten der Bürger? : Probleme der Kreislaufwirtschaft und Lösungsansätze für eine Entlastung der Haushalte

    OpenAIRE

    Kaimer, Martin; Schade, Diethard

    2000-01-01

    Das heutige Abfallentsorgungssystem und die ihm zugrunde liegenden gesetzlichen Regelungen haben eine lange Vorgeschichte und beruhen auf unterschiedlichen Zielsetzungen. Im Ergebnis haben die daraus folgenden Anforderungen zu teilweise fragwürdigen Entsorgungspfaden, zu einem komplizierten Nebeneinander privater und öffentlichrechtlicher Entsorger und vor allem zu höheren Müllgebühren für die Bürger geführt. Ausgehend von den Wirkungen, die mit der Umsetzung der gesetzlichen Regelungen errei...

  18. Uncertainty of soil erosion modelling using open source high resolution and aggregated DEMs

    Directory of Open Access Journals (Sweden)

    Arun Mondal

    2017-05-01

    Full Text Available Digital Elevation Model (DEM is one of the important parameters for soil erosion assessment. Notable uncertainties are observed in this study while using three high resolution open source DEMs. The Revised Universal Soil Loss Equation (RUSLE model has been applied to analysis the assessment of soil erosion uncertainty using open source DEMs (SRTM, ASTER and CARTOSAT and their increasing grid space (pixel size from the actual. The study area is a part of the Narmada river basin in Madhya Pradesh state, which is located in the central part of India and the area covered 20,558 km2. The actual resolution of DEMs is 30 m and their increasing grid spaces are taken as 90, 150, 210, 270 and 330 m for this study. Vertical accuracy of DEMs has been assessed using actual heights of the sample points that have been taken considering planimetric survey based map (toposheet. Elevations of DEMs are converted to the same vertical datum from WGS 84 to MSL (Mean Sea Level, before the accuracy assessment and modelling. Results indicate that the accuracy of the SRTM DEM with the RMSE of 13.31, 14.51, and 18.19 m in 30, 150 and 330 m resolution respectively, is better than the ASTER and the CARTOSAT DEMs. When the grid space of the DEMs increases, the accuracy of the elevation and calculated soil erosion decreases. This study presents a potential uncertainty introduced by open source high resolution DEMs in the accuracy of the soil erosion assessment models. The research provides an analysis of errors in selecting DEMs using the original and increased grid space for soil erosion modelling.

  19. Vom Geschäftsgang zum Prozess: Prozessmanagement in Bibliotheken am Beispiel der Staatsbibliothek zu Berlin

    Directory of Open Access Journals (Sweden)

    Cornelia Vonhof

    2015-12-01

    Full Text Available Der Beitrag skizziert den Weg der Staatsbibliothek zu Berlin bei der Implementierung eines systematischen Prozessmanagements. Basierend auf den Erfahrungen aus einem Pilotprojekt werden Vorgehensweisen und Methoden reflektiert und weiterentwickelt, die sich eignen, in einer großen, arbeitsteiligen Organisation eingesetzt zu werden. Beleuchtet werden Motivationsfaktoren für Prozessmanagement sowie neue Ansätze wie Service Blueprint und Adaptiv Case Management, die das klassische Verständnis von Prozessmanagement erweitern. The article outlines the path of the Berlin State Library working towards the implementation of a systematic process management. Based on the experience of a pilot project procedures and methods are reflected and further developed to be suitable for a large, work-sharing organization. Motivating factors for process management as well as new approaches such as Service Blueprint and Adaptive Case Management, that expand the classical understanding of process management, are covered.

  20. Comparative DEMS study on the electrochemical oxidation of carbon blacks

    DEFF Research Database (Denmark)

    Ashton, Sean James; Arenz, Matthias

    2012-01-01

    Publication year: 2012 Source:Journal of Power Sources, Volume 217 Sean J. Ashton, Matthias Arenz The intention of the study presented here is to compare the electrochemical oxidation tendencies of a pristine Ketjen Black EC300 high surface area (HSA) carbon black, and four graphitised counterparts...... heat-treated between 2100 and 3200 °C, such as those typically used as corrosion resistant carbon (CRC) supports for polymer electrolyte membrane fuel cell (PEMFC) catalysts. A methodology combining cyclic voltammetry (CV) and differential electrochemical mass spectrometry (DEMS) is used, which allows......; however, CRC samples graphitised =2800 °C did not exhibit this same behaviour. Highlights ¿ We quantitatively determine electrooxidation of carbon support materials. ¿ We can distinguish between the total and partial electrooxidation. ¿ Non or mildly heat treated carbon forms passivating layer. ¿ Heat...

  1. Pharmakobotanische Untersuchungen von Lavendelsorten auf dem Plattensee- Plateau

    Directory of Open Access Journals (Sweden)

    Tóth, Frida

    2014-09-01

    Full Text Available Auf dem Hof Dörgicsei Levendula Major GmbH wurden 9 Lavendelsorten (6 Sorten von Lavandula angustifolia und 3 Sorten von Lavandula x intermedia untersucht. Neben den morphologischen und Wachstumseigenschaften wurden auch Frisch- und Trockengewichte bewertet. Quantitative und qualitative Untersuchungen von den Blüten- und Ätherischöldrogen wurden auch durchgeführt. Die statistische Analyse zeigte signifikant höhere Erträge bei den Sorten L. angustifolia ’Essence Purple’ und L. x intermedia ’Edelweiss’. Gehalt und Zusammensetzung von ätherischem Öl war eindeutig bei der Sorte L. angustifolia ’Ellagance Purple’ am günstigsten.

  2. Inferring sediment connectivity from high-resolution DEMs of Difference

    Science.gov (United States)

    Heckmann, Tobias; Vericat, Damià

    2017-04-01

    Topographic changes due to the erosion and deposition of bedrock, sediments and soil can be measured by differencing Digital Elevation Models (DEM) acquired at different points in time. So-called morphological sediment budgets can be computed from such DEMs of Difference (DoD) on an areal rather than a point basis. The advent of high-resolution and highly accurate surveying techniques (e.g. LiDAR, SfM), together with recent advances of survey platforms (e.g. UaVs) provides opportunities to improve the spatial and temporal scale (in terms of extent and resolution), the availability and quality of such measurements. Many studies have used DoD to investigate and interpret the spatial pattern of positive and negative vertical differences in terms of erosion and deposition, or of horizontal movement. Vertical differences can be converted to volumes, and negative (erosion) and positive (deposition) volumetric changes aggregated for spatial units (e.g., landforms, hillslopes, river channels) have been used to compute net balances. We argue that flow routing algorithms common in digital terrain analysis provide a means to enrich DoD-based investigations with some information about (potential) sediment pathways - something that has been widely neglected in previous studies. Where the DoD indicates a positive surface change, flow routing delineates the upslope area where the deposited sediment has potentially been derived from. In the downslope direction, flow routing indicates probable downslope pathways of material eroded/detached/entrained where the DoD shows negative surface change. This material has either been deposited along these pathways or been flushed out of the area of investigation. This is a question of sediment connectivity, a property of a system (i.e. a hillslope, a sub-/catchment) that describes its potential to move sediment through itself. The sediment pathways derived from the DEM are related to structural connectivity, while the spatial pattern of (net

  3. Cross Validation on the Equality of Uav-Based and Contour-Based Dems

    Science.gov (United States)

    Ma, R.; Xu, Z.; Wu, L.; Liu, S.

    2018-04-01

    Unmanned Aerial Vehicles (UAV) have been widely used for Digital Elevation Model (DEM) generation in geographic applications. This paper proposes a novel framework of generating DEM from UAV images. It starts with the generation of the point clouds by image matching, where the flight control data are used as reference for searching for the corresponding images, leading to a significant time saving. Besides, a set of ground control points (GCP) obtained from field surveying are used to transform the point clouds to the user's coordinate system. Following that, we use a multi-feature based supervised classification method for discriminating non-ground points from ground ones. In the end, we generate DEM by constructing triangular irregular networks and rasterization. The experiments are conducted in the east of Jilin province in China, which has been suffered from soil erosion for several years. The quality of UAV based DEM (UAV-DEM) is compared with that generated from contour interpolation (Contour-DEM). The comparison shows a higher resolution, as well as higher accuracy of UAV-DEMs, which contains more geographic information. In addition, the RMSE errors of the UAV-DEMs generated from point clouds with and without GCPs are ±0.5 m and ±20 m, respectively.

  4. Dementia-free life expectancy (demFLE) in the Netherlands

    NARCIS (Netherlands)

    Perenboom, R.J.M.; Boshuizen, H.C.; Breteler, M.M.B.; Alewijn, O.; Water, H.P.A. van de

    1996-01-01

    To gain an insight into the burden of dementia in an aging society, life expectancy with dementia and its counterpart dementia-free life expectancy (DemFLE) in The Netherlands are presented. Sullivan's method was used to calculate DemFLE. For elderly living either independently or in homes for the

  5. INFLUENCE OF DEM IN WATERSHED MANAGEMENT AS FLOOD ZONATION MAPPING

    Directory of Open Access Journals (Sweden)

    M. Alrajhi

    2016-06-01

    Full Text Available Despite of valuable efforts from working groups and research organizations towards flood hazard reduction through its program, still minimal diminution from these hazards has been realized. This is mainly due to the fact that with rapid increase in population and urbanization coupled with climate change, flood hazards are becoming increasingly catastrophic. Therefore there is a need to understand and access flood hazards and develop means to deal with it through proper preparations, and preventive measures. To achieve this aim, Geographical Information System (GIS, geospatial and hydrological models were used as tools to tackle with influence of flash floods in the Kingdom of Saudi Arabia due to existence of large valleys (Wadis which is a matter of great concern. In this research paper, Digital Elevation Models (DEMs of different resolution (30m, 20m,10m and 5m have been used, which have proven to be valuable tool for the topographic parameterization of hydrological models which are the basis for any flood modelling process. The DEM was used as input for performing spatial analysis and obtaining derivative products and delineate watershed characteristics of the study area using ArcGIS desktop and its Arc Hydro extension tools to check comparability of different elevation models for flood Zonation mapping. The derived drainage patterns have been overlaid over aerial imagery of study area, to check influence of greater amount of precipitation which can turn into massive destructions. The flow accumulation maps derived provide zones of highest accumulation and possible flow directions. This approach provide simplified means of predicting extent of inundation during flood events for emergency action especially for large areas because of large coverage area of the remotely sensed data.

  6. Experimental investigations on the mechanisms of the warm prestress effect; Experimentelle Untersuchungen zu den Mechanismen des WPS-Effekts

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E.; Alsmann, U. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt

    1998-11-01

    The Government-supported, joint project by IWW Freiburg, BAM Berlin, IWW Magdeburg, and MPA Stuttgart is intended to yield insight into the mechanisms underlying the WPS, warm prestress effect, and to derive on this basis a quantitative description of the WPS effect. (orig./CB) [Deutsch] Ziel eines durch das BMBF gefoerderten Gemeinschaftsprojekts von IWW Freiburg, BAM Berlin, IWW Magdeburg und MPA Stuttgart ist es, die Mechanismen des WPS-(warm prestress)-Effekts zu erklaeren und auf dieser Basis eine quantitative Beschreibung des WPS-Effekts zu ermoeglichen. (orig./MM)

  7. Accuracy assessment of the global TanDEM-X Digital Elevation Model with GPS data

    Science.gov (United States)

    Wessel, Birgit; Huber, Martin; Wohlfart, Christian; Marschalk, Ursula; Kosmann, Detlev; Roth, Achim

    2018-05-01

    The primary goal of the German TanDEM-X mission is the generation of a highly accurate and global Digital Elevation Model (DEM) with global accuracies of at least 10 m absolute height error (linear 90% error). The global TanDEM-X DEM acquired with single-pass SAR interferometry was finished in September 2016. This paper provides a unique accuracy assessment of the final TanDEM-X global DEM using two different GPS point reference data sets, which are distributed across all continents, to fully characterize the absolute height error. Firstly, the absolute vertical accuracy is examined by about three million globally distributed kinematic GPS (KGPS) points derived from 19 KGPS tracks covering a total length of about 66,000 km. Secondly, a comparison is performed with more than 23,000 "GPS on Bench Marks" (GPS-on-BM) points provided by the US National Geodetic Survey (NGS) scattered across 14 different land cover types of the US National Land Cover Data base (NLCD). Both GPS comparisons prove an absolute vertical mean error of TanDEM-X DEM smaller than ±0.20 m, a Root Means Square Error (RMSE) smaller than 1.4 m and an excellent absolute 90% linear height error below 2 m. The RMSE values are sensitive to land cover types. For low vegetation the RMSE is ±1.1 m, whereas it is slightly higher for developed areas (±1.4 m) and for forests (±1.8 m). This validation confirms an outstanding absolute height error at 90% confidence level of the global TanDEM-X DEM outperforming the requirement by a factor of five. Due to its extensive and globally distributed reference data sets, this study is of considerable interests for scientific and commercial applications.

  8. OPEN-SOURCE DIGITAL ELEVATION MODEL (DEMs EVALUATION WITH GPS AND LiDAR DATA

    Directory of Open Access Journals (Sweden)

    N. F. Khalid

    2016-09-01

    Full Text Available Advanced Spaceborne Thermal Emission and Reflection Radiometer-Global Digital Elevation Model (ASTER GDEM, Shuttle Radar Topography Mission (SRTM, and Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010 are freely available Digital Elevation Model (DEM datasets for environmental modeling and studies. The quality of spatial resolution and vertical accuracy of the DEM data source has a great influence particularly on the accuracy specifically for inundation mapping. Most of the coastal inundation risk studies used the publicly available DEM to estimated the coastal inundation and associated damaged especially to human population based on the increment of sea level. In this study, the comparison between ground truth data from Global Positioning System (GPS observation and DEM is done to evaluate the accuracy of each DEM. The vertical accuracy of SRTM shows better result against ASTER and GMTED10 with an RMSE of 6.054 m. On top of the accuracy, the correlation of DEM is identified with the high determination of coefficient of 0.912 for SRTM. For coastal zone area, DEMs based on airborne light detection and ranging (LiDAR dataset was used as ground truth data relating to terrain height. In this case, the LiDAR DEM is compared against the new SRTM DEM after applying the scale factor. From the findings, the accuracy of the new DEM model from SRTM can be improved by applying scale factor. The result clearly shows that the value of RMSE exhibit slightly different when it reached 0.503 m. Hence, this new model is the most suitable and meets the accuracy requirement for coastal inundation risk assessment using open source data. The suitability of these datasets for further analysis on coastal management studies is vital to assess the potentially vulnerable areas caused by coastal inundation.

  9. Batteries and accumulators: everything you always wanted to know. Batteries, accumulators and the environment - questions and answers; Batterien und Akkus - Das wollten Sie wissen.. Fragen und Antworten zu Batterien, Akkus und Umwelt

    Energy Technology Data Exchange (ETDEWEB)

    Leuthold, S.; Minkos, A. (comps.)

    2006-07-15

    Batteries and accumulators are part of our everyday life. This brochure answers problems related to their use and disposal, chargers and charging. Starter batteries for motor vehicles are left out of account, as are special batteries e.g. for electric fences or lights on building sites. The brochure also explains the legal fundamentals for disposal of batteries and provides information on environmental problems relating to production and disposal. Frequently asked questions are answered on the final pages. [German] Batterien und Akkus begleiten unseren Alltag. Solange sie die noetige mobile Versorgung ermoeglichen, sind sie gern gesehen. Versagen sie ihren Dienst, beginnen die Probleme: Wohin mit der leeren Batterie, dem nicht mehr funktionsfaehigen Akku (Keinesfalls in den Hausmuell.)? Welches ist das richtige Ladegeraet und das richtige Ladeverfahren fuer den Akku? Zu diesen und anderen Fragen rund um Geraetebatterien und -akkus gibt diese Broschuere Auskunft. Nicht betrachtet werden hier allerdings Starterbatterien (z.B. fuer Autos und Motorraeder) und bestimmte Spezialbatterien (z.B. fuer Weidezaeune oder Baustellenlampen), die einen Sonderfall darstellen. Die Broschuere erlaeutert auch die gesetzlichen Grundlagen fuer die Entsorgung unbrauchbarer Batterien und Akkus und gibt Informationen zur Umweltbelastung durch Herstellung und Entsorgung. Am Ende der Broschuere werden haeufig gestellte Fragen und deren Antworten zusammengestellt.

  10. Threshold-Konzepte, das ANCIL-Curriculum und die Metaliteracy – Überlegungen zu Konsequenzen für die Förderung von Informationskompetenz in deutschen Hochschulen

    Directory of Open Access Journals (Sweden)

    Wilfried Sühl-Strohmenger

    2017-04-01

    Full Text Available Das Verständnis von Informationskompetenz, wie es sich im deutschsprachigen Raum seit etwa 15 Jahren entwickelt hat, steht auch aufgrund neuer Ansätze und Ideen zur Information Literacy aus dem angloamerikanischen Raum zur Diskussion. Vor allem bezieht sich das auf die Threshold-Konzepte sowie das Framework-Modell der US-amerikanischen Association of College & Research Libraries (ACRL, ferner die Metaliteracy-Theorie von Mackey und Jacobson und schließlich auf das neue britische ANCIL-Curriculum. Nun sind aus deutscher bibliothekarischer Sicht nicht alle mit den oben genannten neuen Konzepten verbundenen Gedankengänge und Argumente der Kolleginnen und Kollegen aus den USA und aus Großbritannien ohne weiteres nachvollziehbar gewesen. Und wie verhalten sie sich zu den Standards der Informationskompetenz? Jetzt liegen erste Ansätze in den USA vor, die explizit auf dem Threshold-Modell bzw. dem ACRL-Framework aufbauen, so dass eine konkretere Grundlage für mögliche Übertragungen der Modelle auf Kurs- und Schulungskonzepte zur Förderung von Informationskompetenz im deutschsprachigen Raum gegeben ist.   The concept of information competency, as developed in the German-speaking countries for about 15 years, has recently come up for discussion because of new approaches and ideas about information literacy from the Anglo-American countries. This mostly refers to the threshold concepts as well as the framework model of the US-American ACRL, the Metaliteracy Theory by Mackey and Jacobson and finally the new curriculum of the British ANCIL. From a German librarian's point of view, not all of the ideas and arguments of our American and British colleagues which are connected to the above-mentioned new concepts were easy to understand. Another question is how they relate to the standards of information competency. By now, first approaches in the US, which are explicitly based on the Threshold Model or the ACRL Framework, have been made available

  11. Antarctic 1 km Digital Elevation Model (DEM) from Combined ERS-1 Radar and ICESat Laser Satellite Altimetry

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides a 1 km resolution Digital Elevation Model (DEM) of Antarctica. The DEM combines measurements from the European Remote Sensing Satellite-1...

  12. Original Product Resolution (OPR) Source Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data collection is the Original Product Resolution (OPR) Digital Elevation Model (DEM) as provided to the USGS. This DEM is delivered in the original...

  13. Ungeklärte Fragen zu den Handschriften Codex Calixtinus und Ripoll 99

    Directory of Open Access Journals (Sweden)

    Förster Binz, Verena

    2004-12-01

    Full Text Available There are still a number of unanswered questions in connection with the Codex Calixtinus (E-SCc s.s. They concern the origin of the compilation as it stands in the Codex Calixtinus and also partly in the manuscript Ripoll 99 (E-Bac 99, as well as the relationship between these two sources. This article takes up observations which are based on a detailed comparison of the versions of the tunes from the Mass for the Feast of St. James which appears in both Mss. and of these two with manuscripts in the tradition of Aquitaine and Central France. Several factors suggest that the original compilation was of Spanish or Southern French provenance and was edited and copied in Central France, also that the Mss. Ripoll 99 is neither a copy of the Codex Calixtinus nor based on a common original.

    [de] Im Zusammenhang mit dem Codex Calixtinus (E-SCc s.s. gibt es nach wie vor eine Reihe ungeklärter Fragen. Sie betreffen den Ursprung der im Codex Calixtinus und zum Teil auch in der Handschrift Ripoll 99 (E-Bac 99 überlieferten Kompilation sowie das Verhältnis zwischen diesen beiden Quellen. Der vorliegende Beitrag nimmt Beobachtungen auf, die auf einem detaillierten Vergleich der Melodiefassungen der in beiden Handschriften enthaltenen Messe für das Hauptfest des Jacobus und auf einer Gegeniiberstellung derselben mit Handschriften aus dem zentralfranzösischen und dem aquitanischen Überlieferungskontext basieren. Mehrere Faktoren sprechen dafür, daß die ursprtingliche Kompilation spanischer oder südfranzösischer Provenienz war und in Zentralfrankreich redigiert und kopiert wurde und daß die Handschrift Ripoll 99 keine Abschrift des Codex Calixtinus ist und auch nicht auf der selben Vorlage basiert wie dieser.

  14. Sensitivity of Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations

    Science.gov (United States)

    2016-06-12

    Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations Venkatesh Babu, Kumar Kulkarni, Sanjay...buried in soil viz., (1) coupled discrete element & particle gas methods (DEM-PGM) and (2) Arbitrary Lagrangian-Eulerian (ALE), are investigated. The...DEM_PGM and identify the limitations/strengths compared to the ALE method. Discrete Element Method (DEM) can model individual particle directly, and

  15. Which DEM is best for analyzing fluvial landscape development in mountainous terrains?

    Science.gov (United States)

    Boulton, Sarah J.; Stokes, Martin

    2018-06-01

    Regional studies of fluvial landforms and long-term (Quaternary) landscape development in remote mountain landscapes routinely use satellite-derived DEM data sets. The SRTM and ASTER DEMs are the most commonly utilised because of their longer availability, free cost, and ease of access. However, rapid technological developments mean that newer and higher resolution DEM data sets such as ALOS World 3D (AW3D) and TanDEM-X are being released to the scientific community. Geomorphologists are thus faced with an increasingly problematic challenge of selecting an appropriate DEM for their landscape analyses. Here, we test the application of four medium resolution DEM products (30 m = SRTM, ASTER, AW3D; 12 m = TanDEM-X) for qualitative and quantitative analysis of a fluvial mountain landscape using the Dades River catchment (High Atlas Mountains, Morocco). This landscape comprises significant DEM remote sensing challenges, notably a high mountain relief, steep slopes, and a deeply incised high sinuosity drainage network with narrow canyon/gorge reaches. Our goal was to see which DEM produced the most representative best fit drainage network and meaningful quantification. To achieve this, we used ArcGIS and Stream Profiler platforms to generate catchment hillshade and slope rasters and to extract drainage network, channel long profile and channel slope, and area data. TanDEM-X produces the clearest landscape representation but with channel routing errors in localised high relief areas. Thirty-metre DEMs are smoother and less detailed, but the AW3D shows the closest fit to the real drainage network configuration. The TanDEM-X elevation values are the closest to field-derived GPS measurements. Long profiles exhibit similar shapes but with minor differences in length, elevation, and the degree of noise/smoothing, with AW3D producing the best representation. Slope-area plots display similarly positioned slope-break knickpoints with modest differences in steepness and concavity

  16. Rezension : Wissen um den Wahn. Foucaults Geschichte der Psychiatrie ; zu "Foucaults Geschichte der Psychiatrie"

    OpenAIRE

    Krause, Robert

    2006-01-01

    Aus dem umfangreichen Werk des französischen Philosophen und Sozialhistorikers Michel Foucault (1926-1984) ist ein weiteres Buch auf Deutsch erschienen. Der Band „Die Macht der Psychiatrie" geht auf eine Reihe von Vorlesungen zurück, die Foucault im Wintersemester '73/'74 am Collège de France gehalten hat. Die in Frankreich bereits im Jahr 2003 veröffentlichten 12 Vorlesungen sind der Geschichte der Psychiatrie gewidmet und konzentrieren sich vor allem auf ihre Frühphase. Wesentlich gestützt ...

  17. Ideen zu einer Literatursoziologie des Internets. Mit einer Blogotop-Analyse

    Directory of Open Access Journals (Sweden)

    Peer Trilcke

    2013-11-01

    Full Text Available Der Essay skizziert und exemplifiziert die Möglichkeiten einer Literatursoziologie des Internets und plädiert in diesem Zusammenhang für eine Empirisierung der Forschung zu diesem rasant wachsenden, jedoch bisher in seiner Differenziertheit allenfalls oberflächlich beschriebenen Feld der Kommunikation über Literatur. Hierzu werden die literaturwissenschaftlichen Internet Studies und ihr literatursoziologischer Teilbereich innerhalb der allgemeinen Digital Humanities verortet. Als Beispiel für eine in diesem Sinne relational-empirische Literatursoziologie des Internets werden erste Ergebnisse der Analyse eines sog. Bücherblogotops präsentiert, anhand derer sich einige Mechanismen der sekundären literarischen Kommunikation zwar nicht repräsentativ, aber doch exemplarisch diskutieren lassen.

  18. Cyborg oder Göttin: Wie Technikforscherinnen ihr Verhältnis zu Technik sehen

    Directory of Open Access Journals (Sweden)

    Ulrike Kissmann

    2001-11-01

    Full Text Available Die Autorinnen haben für die Beiträge eigene auto/biographische Erlebnisse ausgewählt, in denen der mediale Charakter von Technik deutlich wird. Die Geschichten erzählen also von Technik, die soziale Ordnung und Bedeutung vermittelt und auf diese Weise dazu beiträgt, Geschlechtergrenzen und andere Grenzen wie die zwischen „bekannt“ und „fremd“ oder „normal“ und „anormal“ herzustellen. Die Auto/Biographien sind durch Technik einerseits fremdbestimmt, andererseits zeigen die Autorinnen auch, wie Selbstbestimmung über diese Grenzen hinweg möglich ist. Sie benutzen Donna Haraways Cyborg Metapher (1985, um das Selbst in der Verflechtung von Sozialem und Technischem auto/biographisch zu rekonstruieren.

  19. Analyse der Literatur zu Klimawirkungen in Deutschland: ein Gesamtbild mit Lücken

    Science.gov (United States)

    Fleischhauer, Mark; Greiving, Stefan; Lindner, Christian; Lückenkötter, Johannes; Schauser, Inke

    Dieses Kapitel präsentiert Ergebnisse einer umfassenden Literaturauswertung zu relevanten Klimawirkungen für Deutschland, die im Rahmen des Projekts "Netzwerk Vulnerabilität" vorgenommen wurde. Es zeigt auf, dass ein aggregiertes Gesamtbild der Klimawirkungen für Deutschland als Grundlage für Folgenabschätzungen und Anpassungsplanungen noch nicht gezeichnet werden kann, da eine große Bandbreite an Ansätzen zur Bewertung von Vulnerabilitäten oder Klimawandelfolgen existiert und die gegenwärtig vorhandenen Klimawirkungs- und Vulnerabilitätsstudien von großer Heterogenität gekennzeichnet sind. Als erster Schritt wird deshalb eine Zusammenschau bereits vorhandener Ansätze geliefert.

  20. ALBA, organisation interaméricaine ou vénézuélienne ?

    Directory of Open Access Journals (Sweden)

    Jean-Jacques Kourliandsky

    2011-01-01

    Full Text Available L’«Alliance Bolivarienne des peuples de notre Amérique», ou ALBA, est de toutes les organisations interaméricaines celle dont l’identité est la plus originale. S’affirmant anti-impérialiste elle donne en effet à l’idéologie une place centrale qui commande la coopération entre ses membres. Mais l’ALBA au quotidien diffère-t-elle d’autres organisations d’intégration ? Le lien entre les différents pays qui la composent n’est-il pas au-delà de l’hommage unanime rendu à Bolivar bien davantage celui de pouvoir bénéficier du pétrole vénézuélien à un prix préférentiel ? L’ALBA, comme d’autres institutions latino-américaines, ne répond-elle pas à l’ambition d’un État, en l’occurrence ici le Venezuela, plus qu’à celle de construire un projet collectif pérenne? Ce lien entre le pétrole de son initiateur vénézuélien et l’ALBA, est une garantie pour le présent. Mais l’ALBA survivrait-elle à une alternance politique au Venezuela, ou à une chute des prix du baril affectant le nerf de l’organisation ?

  1. The new IEA research programme on PV systems in buildings; Das neue Forschungsprogramm der internationalen Energieagentur zu Photovoltaik an Gebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    Laukamp, H.; Erge, T. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. fuer Photovoltaische Systeme und Messtechnik

    1998-02-01

    The International Energy Agency coordinates and supports the cooperation of OECD countries in energy politics and energy technologies by technology-oriented scientific programmes (`implementing agreements`). Under these agreements subject-oriented scientific projects (`tasks`) are carried out. Within the `Photovoltaic Power Systems Programme` the Task VII (Photovoltaics in the Built Environment) has just begun. The Fraunhofer ISE was contracted to coordinate the German contribution to Task VII and to organize information transfer to interested German institutions. So far Task VII focussed on a selection of architecturally outstanding PV buildings, on developing criteria to assess their quality and on a critical review of planned PV buildings. (orig.) [Deutsch] Die Internationale Energieagentur foerdert die Zusammenarbeit der OECD Laender in der Energiepolitik und bei den Energietechnologien, durch gemeinsam vereinbarte technologiespezifische Programme (`Implementing Agreements`). Die Programme werden durch Projekte (`Tasks`) konkretisiert. Im Programm `Photovoltaic Power Systems` wird derzeit Task VII `Photovoltaics in the Built Environment` begonnen. Das Fraunhofer ISE wurde gebeten, die deutsche Beteiligung hieran zu koordinieren und den Informationstransfer zu interessierten deutschen Firmen und Instituten zu organisieren. Schwerpunkte bisheriger Arbeiten lagen bei der Auswahl architektonisch herausragender PV-Gebaeude, bei der Erarbeitung von Kriterien zu ihrer Beurteilung und bei der kritischen Diskussion geplanter PV-Gebaeude. (orig.)

  2. Analysis the Accuracy of Digital Elevation Model (DEM) for Flood Modelling on Lowland Area

    Science.gov (United States)

    Zainol Abidin, Ku Hasna Zainurin Ku; Razi, Mohd Adib Mohammad; Bukari, Saifullizan Mohd

    2018-04-01

    Flood is one type of natural disaster that occurs almost every year in Malaysia. Commonly the lowland areas are the worst affected areas. This kind of disaster is controllable by using an accurate data for proposing any kinds of solutions. Elevation data is one of the data used to produce solutions for flooding. Currently, the research about the application of Digital Elevation Model (DEM) in hydrology was increased where this kind of model will identify the elevation for required areas. University of Tun Hussein Onn Malaysia is one of the lowland areas which facing flood problems on 2006. Therefore, this area was chosen in order to produce DEM which focussed on University Health Centre (PKU) and drainage area around Civil and Environment Faculty (FKAAS). Unmanned Aerial Vehicle used to collect aerial photos data then undergoes a process of generating DEM according to three types of accuracy and quality from Agisoft PhotoScan software. The higher the level of accuracy and quality of DEM produced, the longer time taken to generate a DEM. The reading of the errors created while producing the DEM shows almost 0.01 different. Therefore, it has been identified there are some important parameters which influenced the accuracy of DEM.

  3. Generation and performance assessment of the global TanDEM-X digital elevation model

    Science.gov (United States)

    Rizzoli, Paola; Martone, Michele; Gonzalez, Carolina; Wecklich, Christopher; Borla Tridon, Daniela; Bräutigam, Benjamin; Bachmann, Markus; Schulze, Daniel; Fritz, Thomas; Huber, Martin; Wessel, Birgit; Krieger, Gerhard; Zink, Manfred; Moreira, Alberto

    2017-10-01

    The primary objective of the TanDEM-X mission is the generation of a global, consistent, and high-resolution digital elevation model (DEM) with unprecedented global accuracy. The goal is achieved by exploiting the interferometric capabilities of the two twin SAR satellites TerraSAR-X and TanDEM-X, which fly in a close orbit formation, acting as an X-band single-pass interferometer. Between December 2010 and early 2015 all land surfaces have been acquired at least twice, difficult terrain up to seven or eight times. The acquisition strategy, data processing, and DEM calibration and mosaicking have been systematically monitored and optimized throughout the entire mission duration, in order to fulfill the specification. The processing of all data has finally been completed in September 2016 and this paper reports on the final performance of the TanDEM-X global DEM and presents the acquisition and processing strategy which allowed to obtain the final DEM quality. The results confirm the outstanding global accuracy of the delivered product, which can be now utilized for both scientific and commercial applications.

  4. Eröffnung des „Hauses der Astronomie“ auf dem Königsstuhl

    OpenAIRE

    Pössel, Markus; Tschira, Klaus

    2012-01-01

    Mit dem „Haus der Astronomie“ (HdA) auf dem Königsstuhl ist ein neues Zentrum für astronomische Bildungs- und Öffentlichkeitsarbeit in Heidelberg eröffnet. Das Haus der Astronomie ist eine gemeinsame Einrichtung der Max-Planck-Gesellschaft (MPG) und der Klaus Tschira Stiftung unter Beteiligung der Stadt Heidelberg und der Ruperto Carola, deren Zentrum für Astronomie eng mit dem HdA zusammenarbeitet. Ziel des HdA ist es, astronomische Forschung einer breiten Öffentlichkeit in verständlicher Fo...

  5. DEM Simulation of Particle Stratification and Segregation in Stockpile Formation

    Directory of Open Access Journals (Sweden)

    Zhang Dizhe

    2017-01-01

    Full Text Available Granular stockpiles are commonly observed in nature and industry, and their formation has been extensively investigated experimentally and mathematically in the literature. One of the striking features affecting properties of stockpiles are the internal patterns formed by the stratification and segregation processes. In this work, we conduct a numerical study based on DEM (discrete element method model to study the influencing factors and triggering mechanisms of these two phenomena. With the use of a previously developed mixing index, the effects of parameters including size ratio, injection height and mass ratio are investigated. We found that it is a void-filling mechanism that differentiates the motions of particles with different sizes. This mechanism drives the large particles to flow over the pile surface and segregate at the pile bottom, while it also pushes small particles to fill the voids between large particles, giving rise to separate layers. Consequently, this difference in motion will result in the observed stratification and segregation phenomena.

  6. „Wir verbrachten mehr als 24 Stunden, ohne etwas anderes als Schokolade und Limonade zu uns zu nehmen“. Hinweise in Alexander von Humboldts Tagebuchaufzeichnungen zu Fragen der Verpflegung auf der Forschungsreise durch Spanisch-Amerika

    Directory of Open Access Journals (Sweden)

    Ursula Thiemer-Sachse

    2013-12-01

    Full Text Available Zusammenfassung In Alexander von Humboldts Tagebüchern seiner berühmten Forschungsreise durch Spanisch-Amerika finden sich Bemerkungen und Hinweise für künftige Leser seiner Reisedarstellungen zu Problemen der Verpflegung. Zumeist werden Engpässe und Missstände erwähnt sowie Fragen soziopolitischer Situation verdeutlicht. Sie beziehen sich auf Extrembedingungen in stadtfernen Gebieten und im Kontakt mit den indigenen Trägern und Helfern während der einzelnen Exkursionen. Die Darstellungen der alltäglichen Gegebenheiten sind zugleich eine interessante Quelle für Verhaltensmuster der verschiedenen Schichten der spanischkolonialen Gesellschaft wie der Forschungsreisenden, die mit den Schwierigkeiten umzugehen hatten, sich anzupassen verstanden oder ihre eigenen Verhaltensmuster entwickelt haben. Damit ermöglichen Humboldts Aufzeichnungen zugleich auch auf diesem Gebiet manchen Blick auf den seither erfolgten Kulturwandel. Resumen En los diarios del famoso viaje de estudios de Alejandro de Humboldt por la América española se encuentran observaciones y notas sobre problemas de aprovisionamiento, en favor de lectores futuros de sus relaciones de viaje. En la mayoría de los casos Humboldt menciona situaciones precarias o ilustra cuestiones de carácter sociopolítico. Frecuentemente, sus apuntes se refieren a condiciones extremas en regiones remotas y en contacto con los cargadores y ayudantes indígenas durante las diferentes excursiones. Las descripciones de los acontecimientos cotidianos al mismo tiempo son una fuente interesante sobre los modos de proceder de las diferentes capas de la sociedad colonial española así como de los viajeros científicos que tuvieron que enfrentar dificultades a las cuales había que adaptarse o desarrollar modelos propios de comportamiento. Por esto al mismo tiempo las noticias de Humboldt también en este asunto posibilitan más de una vez la atención al cambio cultural que se ha realizado hasta hoy

  7. Power plants at the bottom of the sea; Kraftwerke auf dem Meeresgrund

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, Klaus

    2011-07-01

    The depths of the ocean are a hostile environment. In a bid to defy these adverse conditions, many organisms have teamed up to form close relationships called symbioses. Nicole Dubilier and her colleagues at the Max Planck Institute for Marine Microbiology in Bremen keep discovering new symbioses that provide these deep-sea inhabitants with a guaranteed energy supply. (orig.) [German] Die Tiefen der Ozeane sind ein lebensfeindlicher Ort. Um den widrigen Bedingungen zu trotzen, haben sich viele Organismen zu Lebensgemeinschaften zusammengeschlossen. Nicole Dubilier und ihre Mitarbeiter am Max-Planck-Institut fuer marine Mikrobiologie in Bremen entdecken immer wieder neue Symbiosen, mit denen die Tiefseebewohner ihre Energieversorgung sicherstellen.

  8. A photogrammetric DEM of Greenland based on 1978-1987 aerial photos: validation and integration with laser altimetry and satellite-derived DEMs

    DEFF Research Database (Denmark)

    Korsgaard, Niels Jákup; Kjær, Kurt H.; Nuth, Christopher

    Here we present a DEM of Greenland covering all ice-free terrain and the margins of the GrIS and local glaciers and ice caps. The DEM is based on the 3534 photos used in the aero-triangulation which were recorded by the Danish Geodata Agency (then the Geodetic Institute) in survey campaigns...... spanning the period 1978-1987. The GrIS is covered tens of kilometers into the interior due to the large footprints of the photos (30 x 30 km) and control provided by the aero-triangulation. Thus, the data are ideal for providing information for analysis of ice marginal elevation change and also control...

  9. 2012 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar DEM: Rogue River Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset encompasses portions of Coos, Curry, Douglas, Jackson, and Josephine Counties.The bare earth digital elevation model (DEM) represents the earth's surface...

  10. Relative Error Evaluation to Typical Open Global dem Datasets in Shanxi Plateau of China

    Science.gov (United States)

    Zhao, S.; Zhang, S.; Cheng, W.

    2018-04-01

    Produced by radar data or stereo remote sensing image pairs, global DEM datasets are one of the most important types for DEM data. Relative error relates to surface quality created by DEM data, so it relates to geomorphology and hydrologic applications using DEM data. Taking Shanxi Plateau of China as the study area, this research evaluated the relative error to typical open global DEM datasets including Shuttle Radar Terrain Mission (SRTM) data with 1 arc second resolution (SRTM1), SRTM data with 3 arc second resolution (SRTM3), ASTER global DEM data in the second version (GDEM-v2) and ALOS world 3D-30m (AW3D) data. Through process and selection, more than 300,000 ICESat/GLA14 points were used as the GCP data, and the vertical error was computed and compared among four typical global DEM datasets. Then, more than 2,600,000 ICESat/GLA14 point pairs were acquired using the distance threshold between 100 m and 500 m. Meanwhile, the horizontal distance between every point pair was computed, so the relative error was achieved using slope values based on vertical error difference and the horizontal distance of the point pairs. Finally, false slope ratio (FSR) index was computed through analyzing the difference between DEM and ICESat/GLA14 values for every point pair. Both relative error and FSR index were categorically compared for the four DEM datasets under different slope classes. Research results show: Overall, AW3D has the lowest relative error values in mean error, mean absolute error, root mean square error and standard deviation error; then the SRTM1 data, its values are a little higher than AW3D data; the SRTM3 and GDEM-v2 data have the highest relative error values, and the values for the two datasets are similar. Considering different slope conditions, all the four DEM data have better performance in flat areas but worse performance in sloping regions; AW3D has the best performance in all the slope classes, a litter better than SRTM1; with slope increasing

  11. VT Lidar Hydro-flattened DEM (0.7 meter) - 2014 - Chittenden, Lamoille, Orleans, & Washington Counties

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Eastern VT 2014 0.7m and Digital Elevation Model (DEM) dataset of the following...

  12. Evaluation of TanDEMx and SRTM DEM on watershed simulated ...

    Indian Academy of Sciences (India)

    57

    **Department of Environmental and Water Resource Engineering. School of Civil .... Few studies have investigated the impact of DEM on watershed delineation like ..... on Integrating GIS and Environmental Modelling, Santa Fe, New. Mexico.

  13. VT Lidar Hydro-flattened DEM (0.7 meter) - 2015 - Windham County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Windham County 2015 0.7m and Digital Elevation Model (DEM) dataset of the following...

  14. 5 Meter Alaska Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is comprised of 5-meter ifsar-derived Digital Elevation Models (DEMs) over Alaska only. It is distributed as one-degree blocks with overedge. Horizontal...

  15. Glacier Volume Change Estimation Using Time Series of Improved Aster Dems

    Science.gov (United States)

    Girod, Luc; Nuth, Christopher; Kääb, Andreas

    2016-06-01

    Volume change data is critical to the understanding of glacier response to climate change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system embarked on the Terra (EOS AM-1) satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available to date, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. Here, we developed an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC) model and the detection and correction of cross-track sensor jitter in order to compute DEMs. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 km and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. Our sensor modeling does not require ground control points and allows thus potentially for the automatic processing of large data volumes. As a proof of concept, we chose a set of glaciers with reference DEMs available to assess the quality of our measurements. We use time series of ASTER scenes from which we extracted DEMs with a ground sampling distance of 15m. Our method directly measures and accounts for the cross-track component of jitter so that the resulting DEMs are not contaminated by this process. Since the along-track component of jitter has the same direction as the stereo parallaxes, the two cannot be separated and the elevations extracted are thus contaminated by along-track jitter. Initial tests reveal no clear relation between the cross-track and along-track components so that the latter seems not to be

  16. GLACIER VOLUME CHANGE ESTIMATION USING TIME SERIES OF IMPROVED ASTER DEMS

    Directory of Open Access Journals (Sweden)

    L. Girod

    2016-06-01

    Full Text Available Volume change data is critical to the understanding of glacier response to climate change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER system embarked on the Terra (EOS AM-1 satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available to date, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. Here, we developed an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC model and the detection and correction of cross-track sensor jitter in order to compute DEMs. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 km and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. Our sensor modeling does not require ground control points and allows thus potentially for the automatic processing of large data volumes. As a proof of concept, we chose a set of glaciers with reference DEMs available to assess the quality of our measurements. We use time series of ASTER scenes from which we extracted DEMs with a ground sampling distance of 15m. Our method directly measures and accounts for the cross-track component of jitter so that the resulting DEMs are not contaminated by this process. Since the along-track component of jitter has the same direction as the stereo parallaxes, the two cannot be separated and the elevations extracted are thus contaminated by along-track jitter. Initial tests reveal no clear relation between the cross-track and along-track components so that the latter

  17. Sterblichkeit: der paradoxe Kunstgriff des Lebens - Eine Betrachtung vor dem Hintergrund der modernen Biologie

    Science.gov (United States)

    Verbeek, Bernhard

    Leben gibt es auf der Erde seit fast 4 Mio. Jahren, trotz allen Katastrophen. Die Idee des Lebens scheint unsterblich. Der Tod aber offenbar auch. Jedes Lebewesen ist davon bedroht, ja für Menschen und andere "höhere“ Lebewesen ist er im Lebensprogramm eingebaut - todsicher. Diese Tatsache ist alles andere als selbstverständlich. Ist sie überhaupt kompatibel mit dem Prinzip der Evolution, nach dem der am besten Angepasste überlebt?

  18. Uncertainty of SWAT model at different DEM resolutions in a large mountainous watershed.

    Science.gov (United States)

    Zhang, Peipei; Liu, Ruimin; Bao, Yimeng; Wang, Jiawei; Yu, Wenwen; Shen, Zhenyao

    2014-04-15

    The objective of this study was to enhance understanding of the sensitivity of the SWAT model to the resolutions of Digital Elevation Models (DEMs) based on the analysis of multiple evaluation indicators. The Xiangxi River, a large tributary of Three Gorges Reservoir in China, was selected as the study area. A range of 17 DEM spatial resolutions, from 30 to 1000 m, was examined, and the annual and monthly model outputs based on each resolution were compared. The following results were obtained: (i) sediment yield was greatly affected by DEM resolution; (ii) the prediction of dissolved oxygen load was significantly affected by DEM resolutions coarser than 500 m; (iii) Total Nitrogen (TN) load was not greatly affected by the DEM resolution; (iv) Nitrate Nitrogen (NO₃-N) and Total Phosphorus (TP) loads were slightly affected by the DEM resolution; and (v) flow and Ammonia Nitrogen (NH₄-N) load were essentially unaffected by the DEM resolution. The flow and dissolved oxygen load decreased more significantly in the dry season than in the wet and normal seasons. Excluding flow and dissolved oxygen, the uncertainties of the other Hydrology/Non-point Source (H/NPS) pollution indicators were greater in the wet season than in the dry and normal seasons. Considering the temporal distribution uncertainties, the optimal DEM resolutions for flow was 30-200 m, for sediment and TP was 30-100 m, for dissolved oxygen and NO₃-N was 30-300 m, for NH₄-N was 30 to 70 m and for TN was 30-150 m. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. An experimentally validated DEM study of powder mixing in a paddle blade mixer

    OpenAIRE

    Pantaleev, Stefan; Yordanova, Slavina; Janda, Alvaro; Marigo, Michele; Ooi, Jin

    2017-01-01

    An investigation on the predictive capabilities of Discrete Element Method simulations of a powder mixing process in a laboratory scale paddle blade mixer is presented. The visco-elasto-plastic frictional adhesive DEM contactmodel of Thakur et al. (2014) was used to represent the cohesive behaviour of an aluminosilicate powder in which the model parameters were determined using experimental flow energy measurements from the FT4powder rheometer. DEM simulations of the mixing process using the ...

  20. An Investigation into Solution Verification for CFD-DEM

    Energy Technology Data Exchange (ETDEWEB)

    Fullmer, William D. [National Energy Technology Lab. (NETL), AECOM, Morgantown, WV (United States); Musser, Jordan [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2017-10-01

    This report presents the study of the convergence behavior of the computational fluid dynamicsdiscrete element method (CFD-DEM) method, specifically National Energy Technology Laboratory’s (NETL) open source MFiX code (MFiX-DEM) with a diffusion based particle-tocontinuum filtering scheme. In particular, this study focused on determining if the numerical method had a solution in the high-resolution limit where the grid size is smaller than the particle size. To address this uncertainty, fixed particle beds of two primary configurations were studied: i) fictitious beds where the particles are seeded with a random particle generator, and ii) instantaneous snapshots from a transient simulation of an experimentally relevant problem. Both problems considered a uniform inlet boundary and a pressure outflow. The CFD grid was refined from a few particle diameters down to 1/6th of a particle diameter. The pressure drop between two vertical elevations, averaged across the bed cross-section was considered as the system response quantity of interest. A least-squares regression method was used to extrapolate the grid-dependent results to an approximate “grid-free” solution in the limit of infinite resolution. The results show that the diffusion based scheme does yield a converging solution. However, the convergence is more complicated than encountered in simpler, single-phase flow problems showing strong oscillations and, at times, oscillations superimposed on top of globally non-monotonic behavior. The challenging convergence behavior highlights the importance of using at least four grid resolutions in solution verification problems so that (over-determined) regression-based extrapolation methods may be applied to approximate the grid-free solution. The grid-free solution is very important in solution verification and VVUQ exercise in general as the difference between it and the reference solution largely determines the numerical uncertainty. By testing

  1. ASTER Global DEM contribution to GEOSS demonstrates open data sharing

    Science.gov (United States)

    Sohre, T.; Duda, K. A.; Meyer, D. J.; Behnke, J.; Nasa Esdis Lp Daac

    2010-12-01

    across all the GEOSS Societal Benefit areas was shown. The release of the global tiled research-grade DEM resulted in a significant increase in demand for ASTER elevation models, and increased awareness of related products. No cost access to these data has also promoted new applications of remotely sensed data, increasing their use across the full range of the GEOSS societal benefit areas. In addition, the simplified data access and greatly expanded pool of users resulted in a number of suggestions from researchers in many disciplines for possible enhancements to future versions of the ASTER GDEM. The broad distribution of the product can be directly attributed to the adoption of fundamental GEOSS data sharing principles, which are directed toward expanded access by minimizing time delay and cost, thus facilitating data use for education, research, and a range of other applications. The ASTER GDEM demonstrated the need and user demand for an improved global DEM product as well as the added benefit of not only “full and open” distribution, but “free and open” distribution.

  2. DEM simulation of granular flows in a centrifugal acceleration field

    Science.gov (United States)

    Cabrera, Miguel Angel; Peng, Chong; Wu, Wei

    2017-04-01

    The main purpose of mass-flow experimental models is abstracting distinctive features of natural granular flows, and allow its systematic study in the laboratory. In this process, particle size, space, time, and stress scales must be considered for the proper representation of specific phenomena [5]. One of the most challenging tasks in small scale models, is matching the range of stresses and strains among the particle and fluid media observed in a field event. Centrifuge modelling offers an alternative to upscale all gravity-driven processes, and it has been recently employed in the simulation of granular flows [1, 2, 3, 6, 7]. Centrifuge scaling principles are presented in Ref. [4], collecting a wide spectrum of static and dynamic models. However, for the case of kinematic processes, the non-uniformity of the centrifugal acceleration field plays a major role (i.e., Coriolis and inertial effects). In this work, we discuss a general formulation for the centrifugal acceleration field, implemented in a discrete element model framework (DEM), and validated with centrifuge experimental results. Conventional DEM simulations relate the volumetric forces as a function of the gravitational force Gp = mpg. However, in the local coordinate system of a rotating centrifuge model, the cylindrical centrifugal acceleration field needs to be included. In this rotating system, the centrifugal acceleration of a particle depends on the rotating speed of the centrifuge, as well as the position and speed of the particle in the rotating model. Therefore, we obtain the formulation of centrifugal acceleration field by coordinate transformation. The numerical model is validated with a series of centrifuge experiments of monodispersed glass beads, flowing down an inclined plane at different acceleration levels and slope angles. Further discussion leads to the numerical parameterization necessary for simulating equivalent granular flows under an augmented acceleration field. The premise of

  3. Modelling of Singapore's topographic transformation based on DEMs

    Science.gov (United States)

    Wang, Tao; Belle, Iris; Hassler, Uta

    2015-02-01

    Singapore's topography has been heavily transformed by industrialization and urbanization processes. To investigate topographic changes and evaluate soil mass flows, historical topographic maps of 1924 and 2012 were employed, and basic topographic features were vectorized. Digital elevation models (DEMs) for the two years were reconstructed based on vector features. Corresponding slope maps, a surface difference map and a scatter plot of elevation changes were generated and used to quantify and categorize the nature of the topographic transformation. The surface difference map is aggregated into five main categories of changes: (1) areas without significant height changes, (2) lowered-down areas where hill ranges were cut down, (3) raised-up areas where valleys and swamps were filled in, (4) reclaimed areas from the sea, and (5) new water-covered areas. Considering spatial proximity and configurations of different types of changes, topographic transformation can be differentiated as either creating inland flat areas or reclaiming new land from the sea. Typical topographic changes are discussed in the context of Singapore's urbanization processes. The two slope maps and elevation histograms show that generally, the topographic surface of Singapore has become flatter and lower since 1924. More than 89% of height changes have happened within a range of 20 m and 95% have been below 40 m. Because of differences in land surveying and map drawing methods, uncertainties and inaccuracies inherent in the 1924 topographic maps are discussed in detail. In this work, a modified version of a traditional scatter plot is used to present height transformation patterns intuitively. This method of deriving categorical maps of topographical changes from a surface difference map can be used in similar studies to qualitatively interpret transformation. Slope maps and histograms were also used jointly to reveal additional patterns of topographic change.

  4. COMPARISON AND CO-REGISTRATION OF DEMS GENERATED FROM HiRISE AND CTX IMAGES

    Directory of Open Access Journals (Sweden)

    Y. Wang

    2016-06-01

    Full Text Available Images from two sensors, the High-Resolution Imaging Science Experiment (HiRISE and the Context Camera (CTX, both on-board the Mars Reconnaissance Orbiter (MRO, were used to generate high-quality DEMs (Digital Elevation Models of the Martian surface. However, there were discrepancies between the DEMs generated from the images acquired by these two sensors due to various reasons, such as variations in boresight alignment between the two sensors during the flight in the complex environment. This paper presents a systematic investigation of the discrepancies between the DEMs generated from the HiRISE and CTX images. A combined adjustment algorithm is presented for the co-registration of HiRISE and CTX DEMs. Experimental analysis was carried out using the HiRISE and CTX images collected at the Mars Rover landing site and several other typical regions. The results indicated that there were systematic offsets between the HiRISE and CTX DEMs in the longitude and latitude directions. However, the offset in the altitude was less obvious. After combined adjustment, the offsets were eliminated and the HiRISE and CTX DEMs were co-registered to each other. The presented research is of significance for the synergistic use of HiRISE and CTX images for precision Mars topographic mapping.

  5. TanDEM-X the Earth surface observation project from space level - basis and mission status

    Directory of Open Access Journals (Sweden)

    Jerzy Wiśniowski

    2015-03-01

    Full Text Available TanDEM-X is DLR (Deutsches Zentrum für Luft- und Raumfahrt the Earth surface observation project using high-resolution SAR interferometry. It opens a new era in space borne radar remote sensing. The system is based on two satellites: TerraSAR-X (TSX and TanDEM-X (TDX flying on the very close, strictly controlled orbits. This paper gives an overview of the radar technology and overview of the TanDEM-X mission concept which is based on several innovative technologies. The primary objective of the mission is to deliver a global digital elevation model (DEM with an unprecedented accuracy, which is equal to or surpass the HRTI-3 specifications (12 m posting, relative height accuracy ±2 m for slope < 20% and ±4 m for slope > 20% [8]. Beyond that, TanDEM-X provides a highly reconfigurable platform for the demonstration of new radar imaging techniques and applications.[b]Keywords[/b]: remote sensing, Bistatic SAR, digital elevation model (DEM, Helix formation, SAR interferomery, HRTI-3, synchronization

  6. Die Radiofrequenz-Kyphoplastie - Fallstudie zu multiplen osteoporotischen Sinterungen der Lendenwirbelsäule

    Directory of Open Access Journals (Sweden)

    Schekelmann R

    2010-01-01

    Full Text Available Im St. Marien-Krankenhaus wurden von Januar 2007 bis September 2009 insgesamt 176 Patienten mit osteoporotischen Wirbelkörperfrakturen mittels Ballonkyphoplastie (BKP behandelt. Die funktionellen Ergebnisse waren gut; es traten keine interventionspflichtigen Komplikationen auf. Seit September 2009 wurden weitere 41 Patienten bei gleicher Indikation mit dem neuen Verfahren der Radiofrequenz- Kyphoplastie (DFine behandelt. Die OPZeiten waren erheblich verkürzt und die Austrittsrate des Zements konnte um 2/3 verringert werden. Wir sahen weder Komplikationen, noch Kreislauf-Beeinträchtigungen. Das neue Verfahren (RF-Kyphoplastie ergab funktionell gleich gute Ergebnisse wie die BKP, benötigte kürzere OP-Zeiten und reduzierte die Anzahl unerwünschter Nebeneffekte.

  7. Gesundheits- und Konzentrationsfähigkeitsuntersuchungen bei Büroangestellten im Rahmen einer Pilotstudie zu Exposition gegenüber tonerbasierten Bürogeräten

    OpenAIRE

    Schumann, Henrik

    2011-01-01

    Ziel der vorliegenden Arbeit war es zu untersuchen, ob und gegebenenfalls in welchem Maße der Betrieb von Laserdruckern und Fotokopiergeräten in Büro-räumen Einfluss auf die von Büroangestellten geäußerten Konzentrations- und Gesundheitsbeschwerden hat. Die Studie wurde dabei als eine Pilotstudie an-gelegt, die primär zur Aufgabe hatte, Erhebungsinstrumente auszuwählen, wei-terzuempfehlen und auf ihre Einsetzbarkeit zu überprüfen. Zu diesem Zwecke wurden zwischen Januar und Oktober 2006 in Ko...

  8. Sewage sludge disposal and recycling; Klaerschlammverwertung mit dem Ziel der Schadstoff-Wertstofftrennung

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, J. [Umweltbundesamt, Abt. III 3 - Abfall- und Awasserwirtschaft, Berlin (Germany)

    2002-07-01

    The potential land pollution from sewage sludge used as agricultural fertilizer was investigated. It was found that sewage sludge contains high levels of heavy metals which will accumulate in the soil to an unacceptable level. Further, it is to be expected that sewage sludge will contain problematic organic pollutants discharged from private households and industrial processes which are not completely removed or filtered out in the sewage plant. Recovery of phosphates is necessary because the supply of phosphate worldwide is limited, and there is no substitute for phosphates as fertilizers. The measures outlined in this contribution should become part of national and EU regulations. [German] Es wurde untersucht, welche Schadstoffeintraege in den Boden durch die Verwendung von Klaerschlaemmen entsprechend den Vorgaben der geltenden deutschen Klaerschlammverordnung in der Praxis zu erwarten und welche Austraege gleichzeitig durch Auswaschung und Erntevorgang in Rechnung zu stellen sind: Danach fuehrt die Klaerschlammduengung zu erhoehten Eintraegen von Schwermetallen und somit ueber die Jahre zu einer Anreicherung im Boden, die auf Dauer nicht akzeptabel ist. Ausserdem ist davon auszugehen, dass Klaerschlaemme aufgrund von Abwassereinleitungen aus privaten Haushalten und Gewerbe eine Vielzahl von problematischen organischen Schadstoffen enthalten, die in den Klaeranlagen nicht abgebaut oder abgetrennt werden und die sich deshalb im Klaerschlamm wiederfinden. Die Rueckgewinnung von Phosphat aus Klaerschlamm und Abwasser ist notwendig, weil die Phosphatvorkommen weltweit begrenzt und Phosphate als Duengemittel nicht ersetzbar sind. Die dargestellten Massnahmen sollen sowohl in die nationalen als auch die EU-Regelungen eingebracht werden. (orig.)

  9. Der kleine Unterschied. Zu den Selbstverhältnissen von Verantwortung und Pflicht

    Directory of Open Access Journals (Sweden)

    Vogelmann Frieder

    2015-12-01

    Full Text Available Die Debatte um die Differenz von „Verantwortung“ und „Pflicht“ ist kein bloßer Streit um Wörter, geht es doch um Begriffe, für die der Anspruch erhoben wird, sie seien konstitutiv für moralische Normativität oder gar für Normativität per se. Doch welchen Unterschied macht es, die besondere Bindungskraft von Normativität über Verantwortung oder über Pflicht zu explizieren? Die Genealogie der philosophischen Reflexionen auf Verantwortung lokalisiert die Differenz zwischen Pflicht und Verantwortung in den jeweiligen Selbstverhältnissen, die mit diesen Begriffen verbunden werden. Die Analyse der Struktur dieser Selbstverhältnisse erklärt sowohl, warum Verantwortung häufig als moderner Ersatzbegriff für Pflicht gedacht wird, als auch, welchen Unterschied die Explikation der Bindungskraft von Normativität über Verantwortung oder Pflicht macht: Je nachdem, mit welchem Begriff normative Kraft erläutert wird, wandert das entsprechende Selbstverhältnis in die Verfasstheit von Normativität ein.

  10. Medienbildung als konstruktive Aneignung von Medienensembles. Vorbemerkungen zu einer Theorie der Medienpädagogik

    Directory of Open Access Journals (Sweden)

    Tilman Bechthold-Hengelhaupt

    2016-12-01

    Full Text Available Die These dieses Aufsatzes lautet, dass im medienpädagogischen Handeln und Kommunizieren Erfahrungen mit dinglich gegebenen Medien verarbeitet und dass dadurch Medienensembles konstruiert werden, also praktisch verfügbare Konfigurationen von Geräten und Gegenständen, unter denen die beteiligten Akteure eine Auswahl treffen können. Der Begriff der Wahl lässt insbesondere einen Anschluss an die Idee einer demokratischen Medienbildung zu. Als erkenntnistheoretische Grundlage wird eine Orientierung an der sinnlichen Erfahrung vorgeschlagen, die gerade in Immanuel Kants "Kritik der reinen Vernunft" als Erkenntnisquelle begründet wird. Dass der Begriff der Medienensembles auch die historische Dimension aufschließen kann, wird am Beispiel des so genannten Neumagener Schulreliefs gezeigt, einem archäologischen Dokument aus der Zeit um 180 n.Chr. This essay proposes the thesis that media education should be understood as consisting in negotiations about experiences with media ensembles. In a constructivist approach, the acting with media ensembles is seen as a form of coming to terms with devices and other media objects that are accessible via sensory experience. In this context, a pivotal idea is that choices are made between different media that are at hand for educational purposes. This concept is further elaborated in the concepts of Immanuel Kant's theory of perception. As an example, an archaeological monument from ca. 180 AD ("Neumagener Schulrelief" is described and interpreted.

  11. Rezension zu: Uta Fenske: Mannsbilder. Eine geschlechterhistorische Betrachtung von Hollywoodfilmen 1946–1960. Bielefeld: transcript Verlag 2008.

    Directory of Open Access Journals (Sweden)

    Asokan Nirmalarajah

    2009-10-01

    Full Text Available Uta Fenske beschäftigt sich in ihrer Dissertation mit den Männlichkeitsentwürfen des klassischen Hollywoodfilms der 1950er Jahre. Die Historikerin blickt damit zurück in eine Ära US-amerikanischer Geschichte, in der soziokulturelle Umbrüche zu einer Erschütterung tradierter Männlichkeitsbilder, zu einem Krisendiskurs über den modernen Mann führten. Fenskes kulturwissenschaftliche Studie kann sich dabei aus zweierlei Sicht profilieren. Zum einen erweitert sie mit der unorthodoxen Wahl ihres Untersuchungsgegenstandes das geschichtswissenschaftliche Quellenkorpus. Zum anderen kann sie durch ihren Rekurs auf eine Vielzahl von Genres zeigen, dass die Hollywoodfilme der 1950er eine größere Fülle an Antworten auf die Krise anbieten als gemeinhin angenommen.

  12. Die Plattform-Ökonomie vor dem EuGH. Zu den Schlussanträgen des Generalanwalts in der Rs. Coty Germany/Parfümerie Akzente / Ruth Janal

    Index Scriptorium Estoniae

    Janal, Ruth

    2017-01-01

    Euroopa Kohtu kohtuasjast (C‑230/16), mis puudutab olukorda, kus turustajad kasutavad üha rohkem kauplemiskohana tootjatest sõltumatuid elektroonilisi platvorme ning arutletakse nende valikuliste turustussüsteemide õiguspärasusest konkurentsieeskirjade seisukohast

  13. Baron von Zach's business relations with the Munich entrepreneur Joseph von Utzschneider (German Title: Geschäftsbeziehungen des Barons von Zach zu dem Münchner Unternehmer Joseph von Utzschneider)

    Science.gov (United States)

    Schneider, Ivo

    The relationship between the astronomer von Zach on the one side and the entrepreneur Joseph von Utzschneider and his partner Georg von Reichenbach on the other dates presumably from the year 1807 when Zach spent two months in Munich. Already in the same year Zach had ordered an instrument for himself and began to solicit business for the institute of Reichenbach, Utzschneider, and Liebherr, which was founded in 1804. One of the clients canvassed by Zach was the director of the observatory in Naples Zuccari. Zuccari had ordered the whole equipment for the new observatory from this institute in 1813. The instruments for Naples, which were completed in 1814, were sent accompanied by Reichenbach by land and sea to their destination where Reichenbach supervised their setup. At that time Reichenbach had separated from Utzschneider who kept the optical institute in Benediktbeuern with his new partner Joseph von Fraunhofer whereas Reichenbach became owner of the mathematical-mechanical institute in Munich. For personal and economical reasons Utzschneider began soon after to produce not only optical glass but also optical devices similar to those offered by Reichenbach. As soon as two institutes in Munich competed against each other on the market for sophisticated geodetical and astronomical instruments Zach sided with Utzschneider. Zach's main professional argument for this decision was that both competitors got the optical glass for their instruments from Utzschneider's optical institute in Benediktbeuern. This meant that Utzschneider had first choice and so the optical part of his instruments could be considered as better than that of Reichenbach`s instruments. Zach's role as an agent in Italy and France for the sale of products coming from Utzschneider's manufactories is highlighted by three of Zach's letters to Utzschneider from 1817 and 1818, two of which are reproduced here for the first time.

  14. On the way to a self-reliance of 90 %. The new construction of the Monte Rosa Lodge in the Swiss Canton Wallis; Auf dem Weg zu 90% Autarkie. Der Neubau der Monte Rosa-Huette im Wallis

    Energy Technology Data Exchange (ETDEWEB)

    Sinn, Ruediger

    2010-07-01

    The new Monte Rosa Lodge in the Swiss Canton Wallis was established not only as a passive house, but also achieves a degree of self-reliance of 90 % due to a thought-out energy management. This is how the future of the alpine construction might look.

  15. Textkritische Edition der Übersetzung des Psalters in die Litauische Sprache von Johannes Bretke, Pastor zu Labiau und Königsberg i. Pr., nach der Handschrift aus dem Jahre 1580 [...

    OpenAIRE

    Gelumbeckaitė, Jolanta

    2003-01-01

    The review discusses the historical critical edition of the Psalm Book translated into Lithuanian by Jonas Bretkūnas in 1580 prepared by Friedrich Scholz, Professor Emeritus at Münster University. This is the first textologically diplomatically in corpore published volume of the Bible manuscript by Bretkūnas (1579–1590) and the first critical edition of the 16th c. Lithuanian manuscript text. The critical edition of the Psalm Book is part of a large Bretkūnas’ Bible publishing project, consis...

  16. Beratung und Coaching zum Fremdsprachenlernen : Konzepte, Qualitätssicherung, praktische Erfahrungen : Beiträge zu einer Arbeitstagung (Hannover 2015)

    OpenAIRE

    Böcker, Jessica; Saunders, Constanze; Koch, Lennart; Langner, Michael (Hrsg.)

    2017-01-01

    Dieser Band entstand im Anschluss an eine Tagung zu Sprachlernberatung, die im Juli 2015 an der Leibniz-Universität Hannover stattgefunden hat. Die wesentlichen Beiträge aus drei Sektionen behandeln theoretisch-konzeptionelle Aspekte neben Fragen der Qualitätssicherung und Beispielen von good practice. Der Band gliedert sich dementsprechend in drei Bereiche: Konzepte und Forschung behandelt Fragen der Definitionen und der Konzepte zu Sprachlernberatung bzw. -coaching und ihre wissenschaft...

  17. Carry-over of plant protection agents through wet deposition on the Kleine Feldberg/Taunus; Eintrag von Pflanzenschutzmitteln durch nasse Deposition auf dem Kleinen Feldberg/Taunus

    Energy Technology Data Exchange (ETDEWEB)

    Gath, B. [Zentrum fuer Umweltforschung der Johann Wolfgang Goethe-Universitaet, Frankfurt am Main (Germany); Jaeschke, W. [Zentrum fuer Umweltforschung der Johann Wolfgang Goethe-Universitaet, Frankfurt am Main (Germany); Kubiak, R. [Landes-Lehr- und Forschungsanstalt fuer Landwirtschaft, Weinbau und Gartenbau, Neustadt an der Weinstrasse (Germany); Ricker, I. [Battelle Europe Battelle-Institut e.V., Frankfurt am Main (Germany); Schmider, F. [BASF AG, Landwirtschaftliche Versuchsstation, Limburgerhof (Germany); Zietz, E. [Battelle Europe Battelle-Institut e.V., Frankfurt am Main (Germany)

    1993-11-01

    On the Feldberg and at two more sites precipitation samples were taken and analysed for selected pesticides (Lindan, Isoproturon, Triadimenol, Pirimicarb, Parathion-ethyl and atrazine). Bulk samplers (acc. to Daemmgen) were used in 14-day intervals. At two stations wet-only samplers were used in addition to the bulk samplers. Parathion-ethyl, Pirimicarb and Triadimenol were only found in single cases only. Distinct annual curves could be established for atrazin and isoproturon, they are shown in desposition charts. Only Lindan was detectable all year round. Concentrations were between 3 and 300 ng l{sup {minus}1}. Annual curves show good correlation with application periods of the individual substances. In general the annual mean value of the concentrations are below 50 ng l{sup {minus}1}. The share of dry deposition depends on substance and weather and account roughly for 10-20% of total deposition. (orig./EW) [Deutsch] Auf dem Feldberg sowie an zwei weiteren Messstandorten wurden parallel Niederschlagsproben genommen und auf ausgewaehlte Pestizide (Lindan, Isoproturon, Triadimenol, Pirimicarb, Parathion-ethyl und Atrazin) untersucht. Die Probenahme erfolgte in bulk-Sammlern nach Daemmgen in 14-Tage Intervallen. An zwei Stationen wurden parallel zu den bulk-Sammlern auch wet-only Sammler betrieben. Parathion-ethyl, Pirimicarb und Triadimenol konnten nur vereinzelt nachgewiesen werden. Von Atrazin und Isoproturon wurden ausgepraegte Jahresgaenge ermittelt und in Depositionsgraphiken dargestellt. Lediglich Lindan war nahezu das ganze Jahr ueber nachweisbar. Die gemessenen Konzentrationen lagen zwischen 3 und 300 ng 1{sup -1}. Die dargestellten Jahresgaenge korrelieren gut mit den jeweiligen Anwendungszeitraeumen der einzelnen Substanzen. Insgesamt liegen die gemessenen Konzentrationen im Jahresmittel unter 50 ngl{sup -1}. Der Beitrag der trockenen Deposition ist substanz- und wetterabhaengig und macht etwa 10-20% der Gesamtdeposition aus. (orig.)

  18. Non-destructive testing of concrete structures with the impact-echo method; Zerstoerungsfreie Pruefung von Betonbauteilen mit dem Impact-Echo-Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Algernon, Daniel; Feistkorn, Sascha; Scherrer, Michael [SVTI Schweizerischer Verein fuer technische Inspektionen, Wallisellen (Switzerland). Nuklearinspektorat

    2016-05-01

    The impact-echo method is based on the use of elastic waves. It was developed in the 1980 for the testing of concrete structures and is currently widespread. Main application areas are the component and coating thickness measurement and detection of delaminations, voids and other defects. Specifically, the method is also used to check the injection faults of clamping channels. Another application is the determination of mechanical material parameters such as the modulus of elasticity. Since the original development of the method has undergone several enhancements. The conversion of a single-point measurement method towards a area component testing, the use by the optimized measurement data acquisition and evaluation enlarged and delivered an important prerequisite for increasing the efficiency. The use of air-coupled sensors not only increases the measurement speed but also provides advantages in rough component surfaces. The imaging analysis in conjunction with signal processing algorithms simplifies the interpretation and allows statistical evaluation. [German] Das Impact-Echo-Verfahren beruht auf der Nutzung elastischer Wellen. Es wurde in den 1980er Jahren fuer die Pruefung von Stahlbetonbauteilen entwickelt und ist derzeit weit verbreitet. Haupteinsatzgebiete sind die Bauteil- und Schichtdickenmessung sowie die Detektion von Delaminationen, Hohl- und anderen Fehlstellen. Insbesondere wird das Verfahren auch zur Pruefung des Verpresszustandes von Spannkanaelen herangezogen. Eine weitere Anwendung ist die Bestimmung mechanischer Materialparameter wie dem Elastizitaetsmodul. Seit der urspruenglichen Entwicklung hat das Verfahren verschiedene Weiterentwicklungen erfahren. Die Ueberfuehrung von einem Einzelpunktmessverfahren hin zu einer flaechigen Bauteilpruefung hat die Einsatzmoeglichkeiten durch die optimierte Messdatenaufnahme und -auswertung vergroessert und eine wichtige Voraussetzung zur Erhoehung der Leistungsfaehigkeit geliefert. Der Einsatz

  19. Die Digitale Bibliothek der Akademie der Wissenschaften zu Göttingen

    Directory of Open Access Journals (Sweden)

    Daniel Beucke

    2014-12-01

    Full Text Available Die Akademie der Wissenschaften zu Göttingen (AdWG und die niedersächsische Staats- und Universitätsbibliothek Göttingen (SUB haben ihre bestehende Kooperation zum Webportal der AdWG intensiviert, das einen Überblick über die Aktivitäten der Göttinger Akademie und umfangreiche Information zu den zahlreichen Langzeitvorhaben bietet und die digitalen Publikationen präsentiert. Zentraler Bestandteil des Webportals ist die Digitale Bibliothek der AdWG, für die im Rahmen der Kooperation neue Präsentationsformen für die Forschungsdaten aus den Akademie-Vorhaben konzipiert und entwickelt wurden. Ein Beispiel für die Umsetzung neuer Präsentationsformen im Portal ist das Edfu-Projekt, dessen Ziel eine Gesamtübersetzung aller Inschriften des Tempels von Edfu in Oberägypten ist. Hinzugezogen werden dazu alle internen, greifbaren, in den Schriften enthaltenen Parallelen, auf die online über das Webportal zugegriffen werden kann. Zerstörte Bereiche lassen sich dadurch oftmals ebenso ergänzen, wie zunächst unverständliche Textpassagen mit Sinn versehen werden können. Nicht nur die bereits vorübersetzten Texte sind auf diese Weise abrufbar, sondern darüber hinaus zahlreiche zusätzliche Materialien, wie z.B. das Fotoarchiv mit seinen mehr als 20.000 Bildern. Die Vernetzung all dieser Daten schafft einen für die Wissenschaft ungewöhnlich tiefen Einblick in die Planung und Konzeption eines altägyptischen Tempels, seiner religiösen Hintergründe und historischen Zusammenhänge. The Göttingen Academy of Sciences and Humanities (AdWG and the Göttingen State and University Library (SUB have intensified their existing cooperation on the web portal of the AdWG. The portal provides an overview of the activities of the Göttingen Academy as well as extensive information on its numerous long-term projects. It also presents the academy’s digital publications. A crucial part of the web portal is the Digital Library of the AdWG. Within the

  20. Planning, budgeting and performance management at Swiss hospitals – Are Swiss hospitals at a crossroads – Will these medical specialist organisations in future develop into institutions with a business orientation? [Die Krankenhäuser der Schweiz am Wendepunkt von der medizinischen Expertenorganisation hin zu betriebswirtschaftlich geführten Institutionen? – Untersuchung zu deren Performance-Management-System

    Directory of Open Access Journals (Sweden)

    Walser, Konrad

    2013-11-01

    die Schweizer Krankenhäuser ein kohärentes und langfristig ausgerichtetes Performance Management aufbauen können. Mit der Einführung von Wettbewerbsmechanismen (DRG-System im neuen Krankenversicherungsgesetz wird die betriebswirtschaftliche Ausrichtung der Krankenhausführung zum Schlüsselfaktor für ein Bestehen am Markt. Die Basis der vorliegenden Untersuchung bildet eine schriftliche Befragung aller Deutschschweizer Krankenhäuser. Diese wurden auf der Grundlage eines Reifegrade-Modells zum Ist- sowie dem Soll-Zustand von deren Performance-Management-Systemen befragt. Das Reifegradmodell wurde für Krankenhäuser angepasst.Die deskriptive Auswertung der Daten zeigt, dass die meisten Krankenhäuser auf dem richtigen Weg sind. Planung und Controlling haben mehrheitlich einen hohen Reifegrad, indes wird die strategische Wichtigkeit eines wirksamen Performance Managements (Reporting, IT-Integration vielerorts noch unterschätzt. So verfügen die meisten Krankenhäuser bereits heute über ausgebaute Planungsmechanismen, beurteilen aber die dazu gehörige Informatikunterstützung als nicht prioritär.Dabei zeigen die bivariaten Auswertungen (Korrelationsmatrizen der Umfrage, dass gerade der IT als Träger oder Plattform des Performance-Managements eine zentrale Rolle zukommt. Gleichzeitig weisen diese weiterführenden Analysen darauf hin, dass die betriebswirtschaftliche Krankenhausplanung der eigentliche Treiber zum Auf- und Ausbau von leistungsfähigen Performance-Management-Systemen ist. Erst eine gut entwickelte und integrierte IT und klare Planwerte, so zeigt sich ausgehend von der Untersuchung, lassen ein umfassendes Performance Management zu.Ein gut funktionierendes Performance Management beinhaltet überdies auch eine organisatorische Komponente. Erst wenn die Aufgaben, Kompetenzen und Verantwortlichkeiten im Hinblick auf die Krankenhaussteuerung bezüglich Betriebswirtschaft, Medizin und Pflege aufeinander abgestimmt sind, können Krankenh

  1. Acute environmental toxicity and persistence of DEM, a chemical agent simulant: Diethyl malonate. [Diethyl malonate

    Energy Technology Data Exchange (ETDEWEB)

    Cataldo, D.A.; Ligotke, M.W.; Harvey, S.D.; Fellows, R.J.; Li, Shu-mei W.; Van Voris, P.; Wentsel, R.S.

    1990-05-01

    The purpose of the following chemical simulant studies is to assess the potential acute environmental effects and persistence of diethyl malonate (DEM). Deposition velocities for DEM to soil surfaces ranged from 0.04 to 0.2 cm/sec. For foliar surfaces, deposition velocities ranged from 0.0002 cm/sec at low air concentrations to 0.05 cm/sec for high dose levels. The residence times or half-lives of DEM deposited to soils was 2 h for the fast component and 5 to 16 h for the residual material. DEM deposited to foliar surfaces also exhibited biphasic depuration. The half-life of the short residence time component ranged from 1 to 3 h, while the longer time component had half-times of 16 to 242 h. Volatilization and other depuration mechanisms reduce surface contaminant levels in both soils and foliage to less than 1% of initial dose within 96 h. DEM is not phytotoxic at foliar mass loading levels of less than 10 {mu}m/cm{sup 2}. However, severe damage is evident at mass loading levels in excess of 17 {mu}g/cm{sup 2}. Tall fescue and sagebrush were more affected than was short-needle pine, however, mass loading levels were markedly different. Regrowth of tall fescue indicated that the effects of DEM are residual, and growth rates are affected only at higher mass loadings through the second harvest. Results from in vitro testing of DEM indicated concentrations below 500 {mu}g/g dry soil generally did not negatively impact soil microbial activity. Short-term effects of DEM were more profound on soil dehydrogenase activity than on soil phosphatase activity. No enzyme inhibition or enhancement was observed after 28 days in incubation. Results of the earthworm bioassay indicate survival to be 86 and 66% at soil doses of 107 and 204 {mu}g DEM/cm{sup 2}, respectively. At higher dose level, activity or mobility was judged to be affected in over 50% of the individuals. 21 refs., 10 figs., 15 tabs.

  2. Was der Religionspädagogik zu denken gibt. Exegetische Denkanstöße.

    Directory of Open Access Journals (Sweden)

    Jeremia Josef M. Mayr

    2014-07-01

    Full Text Available ENGLISH: The following article addresses three exegetical impulses which should be understood as food for thought to religious education. The first concentrates on the relation between exegesis and religious education because of the importance of reflecting on the concrete design of this special relation. The second centers what is indeed the centre of exegesis and religious education: the biblical text itself and the question of its real role and ways to handle it. Finally follows the presentation of a model of interaction with texts trying to equally respect all participants of this process. Simultaneously, this approach arranges a scope for the concrete biblical text allowing it to speak. This model is composed of three central steps: analysis (an exactly methodic procedure, interpretation (based on analysis, posing the question of meaning and appropriation (individually existential meaning. DEUTSCH: Der vorliegende Beitrag möchte aus exegetischer Perspektive drei Denkanstöße an die Religionspädagogik richten. Zunächst wird der Blick auf das Verhältnis zwischen Exegese und Religionspädagogik gelenkt, denn die Gestaltung dieses Verhältnisses ist entscheidend. Der zweite Denkanstoß rückt in die Mitte, was tatsächlich Mittelpunkt der Exegese und der Bibeldidaktik ist: den Text der Bibel selbst und die Frage, wie mit ihm umgegangen wird. Danach soll ein Modell der Textannäherung vorgestellt werden, das es ermöglichen will, mit Blick auf die Beteiligten auch den Texten genügend Raum zu geben, damit sie tatsächlich sprechen können. Die drei zentralen Teile dieses Modells sind Analyse (genaues methodisches Vorgehen, Interpretation (darauf aufbauend die Frage nach der Bedeutung und Aneignung (persönlich-existentielle Bedeutung.

  3. Dem Generation from Close-Range Photogrammetry Using Extended Python Photogrammetry Toolbox

    Science.gov (United States)

    Belmonte, A. A.; Biong, M. M. P.; Macatulad, E. G.

    2017-10-01

    Digital elevation models (DEMs) are widely used raster data for different applications concerning terrain, such as for flood modelling, viewshed analysis, mining, land development, engineering design projects, to name a few. DEMs can be obtained through various methods, including topographic survey, LiDAR or photogrammetry, and internet sources. Terrestrial close-range photogrammetry is one of the alternative methods to produce DEMs through the processing of images using photogrammetry software. There are already powerful photogrammetry software that are commercially-available and can produce high-accuracy DEMs. However, this entails corresponding cost. Although, some of these software have free or demo trials, these trials have limits in their usable features and usage time. One alternative is the use of free and open-source software (FOSS), such as the Python Photogrammetry Toolbox (PPT), which provides an interface for performing photogrammetric processes implemented through python script. For relatively small areas such as in mining or construction excavation, a relatively inexpensive, fast and accurate method would be advantageous. In this study, PPT was used to generate 3D point cloud data from images of an open pit excavation. The PPT was extended to add an algorithm converting the generated point cloud data into a usable DEM.

  4. Uncertainty modelling and analysis of volume calculations based on a regular grid digital elevation model (DEM)

    Science.gov (United States)

    Li, Chang; Wang, Qing; Shi, Wenzhong; Zhao, Sisi

    2018-05-01

    The accuracy of earthwork calculations that compute terrain volume is critical to digital terrain analysis (DTA). The uncertainties in volume calculations (VCs) based on a DEM are primarily related to three factors: 1) model error (ME), which is caused by an adopted algorithm for a VC model, 2) discrete error (DE), which is usually caused by DEM resolution and terrain complexity, and 3) propagation error (PE), which is caused by the variables' error. Based on these factors, the uncertainty modelling and analysis of VCs based on a regular grid DEM are investigated in this paper. Especially, how to quantify the uncertainty of VCs is proposed by a confidence interval based on truncation error (TE). In the experiments, the trapezoidal double rule (TDR) and Simpson's double rule (SDR) were used to calculate volume, where the TE is the major ME, and six simulated regular grid DEMs with different terrain complexity and resolution (i.e. DE) were generated by a Gauss synthetic surface to easily obtain the theoretical true value and eliminate the interference of data errors. For PE, Monte-Carlo simulation techniques and spatial autocorrelation were used to represent DEM uncertainty. This study can enrich uncertainty modelling and analysis-related theories of geographic information science.

  5. Identification and delineation of areas flood hazard using high accuracy of DEM data

    Science.gov (United States)

    Riadi, B.; Barus, B.; Widiatmaka; Yanuar, M. J. P.; Pramudya, B.

    2018-05-01

    Flood incidents that often occur in Karawang regency need to be mitigated. These expectations exist on technologies that can predict, anticipate and reduce disaster risks. Flood modeling techniques using Digital Elevation Model (DEM) data can be applied in mitigation activities. High accuracy DEM data used in modeling, will result in better flooding flood models. The result of high accuracy DEM data processing will yield information about surface morphology which can be used to identify indication of flood hazard area. The purpose of this study was to identify and describe flood hazard areas by identifying wetland areas using DEM data and Landsat-8 images. TerraSAR-X high-resolution data is used to detect wetlands from landscapes, while land cover is identified by Landsat image data. The Topography Wetness Index (TWI) method is used to detect and identify wetland areas with basic DEM data, while for land cover analysis using Tasseled Cap Transformation (TCT) method. The result of TWI modeling yields information about potential land of flood. Overlay TWI map with land cover map that produces information that in Karawang regency the most vulnerable areas occur flooding in rice fields. The spatial accuracy of the flood hazard area in this study was 87%.

  6. Automatic relative RPC image model bias compensation through hierarchical image matching for improving DEM quality

    Science.gov (United States)

    Noh, Myoung-Jong; Howat, Ian M.

    2018-02-01

    The quality and efficiency of automated Digital Elevation Model (DEM) extraction from stereoscopic satellite imagery is critically dependent on the accuracy of the sensor model used for co-locating pixels between stereo-pair images. In the absence of ground control or manual tie point selection, errors in the sensor models must be compensated with increased matching search-spaces, increasing both the computation time and the likelihood of spurious matches. Here we present an algorithm for automatically determining and compensating the relative bias in Rational Polynomial Coefficients (RPCs) between stereo-pairs utilizing hierarchical, sub-pixel image matching in object space. We demonstrate the algorithm using a suite of image stereo-pairs from multiple satellites over a range stereo-photogrammetrically challenging polar terrains. Besides providing a validation of the effectiveness of the algorithm for improving DEM quality, experiments with prescribed sensor model errors yield insight into the dependence of DEM characteristics and quality on relative sensor model bias. This algorithm is included in the Surface Extraction through TIN-based Search-space Minimization (SETSM) DEM extraction software package, which is the primary software used for the U.S. National Science Foundation ArcticDEM and Reference Elevation Model of Antarctica (REMA) products.

  7. TecDEM: A MATLAB Based Toolbox for understanding Tectonics from Digital Elevation Models

    Science.gov (United States)

    Shahzad, F.; Mahmood, S. A.; Gloaguen, R.

    2009-04-01

    TecDEM is a MATLAB based tool box for understanding the tectonics from digital elevation models (DEMs) of any area. These DEMs can be derived from data of any spatial resolution (Low, medium and High). In the first step we extract drainage network from the DEMs using flow grid approach. Drainage network is a group of streams having elevation and catchment area information as a function of spatial locations. We implement an array of stream structure to study this drainage network. Knickpoints can be identified on each stream of the drainage network by a graphical user interface and are helpful for understanding stream morphology. Stream profile analysis in steady state condition is applied on all streams to calculate geomorphic parameters and regional uplift rates. Hack index is calculated for all the profiles at a certain interval and over the change of knickpoints. Reports menu of this tool box generates detailed statistics report, complete tabulated report, graphical output of each analyzed stream profile and Hack index profile. All the calculated values are part of stream structure and is saved as .mat file for later use with this tool box. The spatial distribution of geomorphic parameters, uplift rates and knickpoints are exported as a shape files for visualization in professional GIS software. We test this tool box on DEMs from different tectonic settings worldwide and received verifiable results with other studies.

  8. Auf dem Weg zum Web 3.0: Taxonomien und Ontologien für die medizinische Ausbildung - eine systematische Literaturrecherche [Towards Web 3.0: Taxonomies and ontologies for medical education - a systematic review

    Directory of Open Access Journals (Sweden)

    Blaum, Wolf E.

    2013-02-01

    Curriculumsentwicklung und –kartierung als auch zur Orientierung innerhalb der seit Jahren zunehmenden Fülle von Lernressourcen in der medizinischen Ausbildung stellt das semantische Web („Web 3.0“ ein niedrigschwelliges, effektives Hilfsmittel dar, das es ermöglicht, inhaltlich verwandte Elemente über Systemgrenzen hinweg zu identifizieren. Voraussetzung dafür ist der Einsatz eines geeigneten strukturierten Vokabulars zur maschinenlesbaren, inhaltlichen Beschreibung von Objekten, um die bisher notwendige manuelle Verknüpfung durch eine automatisch erzeugte, inhaltsbasierte bzw. semantische Verknüpfung zu ersetzen. Ziel dieser Arbeit ist es, existierende Taxonomien und Ontologien zur Annotation medizinischer Lernressourcen und -inhalte zusammenzustellen und anhand ausgewählter Kriterien zu vergleichen sowie auf ihre Eignung zum Einsatz im eingangs beschriebenen Kontext zu überprüfen.Methoden: Anhand einer systematischen Literaturrecherche wurden existierende Taxonomien und Ontologien zur Beschreibung medizinischer Lernressourcen identifiziert. Für jedes so identifizierte strukturierte Vokabular wurden mittels Websuche und/oder Kontakt zu den Herausgebern Thema, Struktur, Sprache, Umfang, Wartung und Technik der Taxonomie/Ontologie ermittelt und deren Eignung für den Einsatz im semantischen Web überprüft.Ergebnisse: In 20 identifizierten Publikationen wurden 14 strukturierte Vokabulare identifiziert, die sich in Sprache, Umfang, Aktualität und Wartung zum Teil sehr stark unterschieden. Keines der identifizierten Vokabulare erfüllte die erforderlichen Kriterien zur inhaltlichen Beschreibung medizinischer Ausbildungsinhalte und Lernressourcen im deutschsprachigen Raum.Diskussion: Auf dem Weg zum Web 3.0 stellen Auswahl und Einsatz eines geeigneten, deutschsprachigen Vokabulars zur maschinenlesbaren, inhaltlichen Beschreibung von Objekten ein relevantes Problem dar. Mögliche Lösungsansätze umfassen die Neuentwicklung, die Übersetzung und/ oder die Kombination

  9. Disease specific stress of tumor patients at the beginning of radiotherapy. Effect on psychosocial support requirement; Krankheitsspezifische Belastungen von Tumorpatienten zu Beginn einer Strahlentherapie. Auswirkungen auf den psychosozialen Betreuungsbedarf

    Energy Technology Data Exchange (ETDEWEB)

    Sehlen, S.; Hollenhorst, H.; Schymura, B.; Firsching, M.; Duehmke, E. [Ludwig-Maximilians-Univ., Muenchen (Germany). Klinik und Poliklinik fuer Strahlentherapie und Radioonkologie; Aydemir, U. [Inst. fuer Biometrie und Epidemiologie, Klinikum Grosshadern, Ludwig-Maximilians-Univ., Muenchen (Germany); Herschbach, P. [Technische Univ. Muenchen (Germany). Inst. und Poliklinik fuer Psychosomatische Medizin, Psychotherapie und medizinische Psychologie

    2001-10-01

    requirement. (orig.) [German] Hintergrund: Die Radiotherapie bringt Tumorpatienten in eine besondere Lebenssituation, in der sie eine Reihe von unterschiedlichen Faktoren ausgesetzt werden, deren Auspraegung weitgehend unbekannt ist. Intention dieser Querschnittsstudie war es, erstmals systematisch die spezifischen Belastungen von Tumorpatienten zu Beginn einer Strahlentherapie aufzuzeigen und einen belastungsabhaengigen Betreuungswunsch zu erheben mit dem Ziel einer Belastungsreduktion und Verbesserung von Lebensqualitaet und Compliance waehrend einer radioonkologischen Behandlung. Patienten und Methoden: 732 Patienten wurden zunaechst in die Studie aufgenommen, von denen 446 (60,9%) die Einschlusskriterien erfuellten (Ablehnung 21,0%, Karnofsky-Index 6,6%, organisatorische Probleme 3,4%, Sprachbarrieren 3,0%, kognitive Einschraenkung 2,6%, Tod 2,5%). Folgende Erhebungsinstrumente gingen in die Auswertung zu Beginn der Strahlentherapie ein: medizinische und soziodemographische Daten, Lebenssituation (LS), Fragebogen zur Belastung von Krebspatienten (FBK), selbst definierter Betreuungswunsch (BB). 262 Maenner und 184 Frauen (medianes Alter 60,0 Jahre) mit unterschiedlichen Diagnosen wurden untersucht. Ergebnisse: Auf Skalenebene des Fragebogens zur Belastung von Krebspatienten zeigte sich vor allem eine Belastung durch Einschraenkung der Leistungsfaehigkeit, Angst und Schmerz. Frauen hatten signifikant hoehere Belastungswerte in den Bereichen Schmerz (p=0,016) und Angst (p=0,009), Patienten unter 45 Jahren im Bereich Information (p=0,002) und Patienten zwischen 45 und 60 Jahren in den Bereichen Angst (p=0,002) und Gesamtbelastung (p=0,003). Patientinnen mit einem Mammakarzinom waren am staerksten belastet. Der Anteil von stark belasteten Patienten war in den Skalen Leistungsfaehigkeit (43%) und Angst (40%) am hoechsten. Es bestand ein signifikanter Zusammenhang zwischen hoher Belastung und hohem Betreuungswunsch (insbesondere nach Arzt-/Psychologengespraechen und Information

  10. FUSION OF MULTI-SCALE DEMS FROM DESCENT AND NAVCM IMAGES OF CHANG’E-3 USING COMPRESSED SENSING METHOD

    Directory of Open Access Journals (Sweden)

    M. Peng

    2017-07-01

    Full Text Available The multi-source DEMs generated using the images acquired in the descent and landing phase and after landing contain supplementary information, and this makes it possible and beneficial to produce a higher-quality DEM through fusing the multi-scale DEMs. The proposed fusion method consists of three steps. First, source DEMs are split into small DEM patches, then the DEM patches are classified into a few groups by local density peaks clustering. Next, the grouped DEM patches are used for sub-dictionary learning by stochastic coordinate coding. The trained sub-dictionaries are combined into a dictionary for sparse representation. Finally, the simultaneous orthogonal matching pursuit (SOMP algorithm is used to achieve sparse representation. We use the real DEMs generated from Chang’e-3 descent images and navigation camera (Navcam stereo images to validate the proposed method. Through the experiments, we have reconstructed a seamless DEM with the highest resolution and the largest spatial coverage among the input data. The experimental results demonstrated the feasibility of the proposed method.

  11. Blaze-DEMGPU: Modular high performance DEM framework for the GPU architecture

    Directory of Open Access Journals (Sweden)

    Nicolin Govender

    2016-01-01

    Full Text Available Blaze-DEMGPU is a modular GPU based discrete element method (DEM framework that supports polyhedral shaped particles. The high level performance is attributed to the light weight and Single Instruction Multiple Data (SIMD that the GPU architecture offers. Blaze-DEMGPU offers suitable algorithms to conduct DEM simulations on the GPU and these algorithms can be extended and modified. Since a large number of scientific simulations are particle based, many of the algorithms and strategies for GPU implementation present in Blaze-DEMGPU can be applied to other fields. Blaze-DEMGPU will make it easier for new researchers to use high performance GPU computing as well as stimulate wider GPU research efforts by the DEM community.

  12. Granular dynamics, contact mechanics and particle system simulations a DEM study

    CERN Document Server

    Thornton, Colin

    2015-01-01

    This book is devoted to the Discrete Element Method (DEM) technique, a discontinuum modelling approach that takes into account the fact that granular materials are composed of discrete particles which interact with each other at the microscale level. This numerical simulation technique can be used both for dispersed systems in which the particle-particle interactions are collisional and compact systems of particles with multiple enduring contacts. The book provides an extensive and detailed explanation of the theoretical background of DEM. Contact mechanics theories for elastic, elastic-plastic, adhesive elastic and adhesive elastic-plastic particle-particle interactions are presented. Other contact force models are also discussed, including corrections to some of these models as described in the literature, and important areas of further research are identified. A key issue in DEM simulations is whether or not a code can reliably simulate the simplest of systems, namely the single particle oblique impact wit...

  13. Diagnostic of the temperature and differential emission measure (DEM based on Hinode/XRT data

    Directory of Open Access Journals (Sweden)

    P. Rudawy

    2008-10-01

    Full Text Available We discuss here various methodologies and an optimal strategy of the temperature and emission measure diagnostics based on Hinode X-Ray Telescope data. As an example of our results we present the determination of the temperature distribution of the X-rays emitting plasma using a filters ratio method and three various methods of the calculation of the differential emission measure (DEM. We have found that all these methods give results similar to the two filters ratio method. Additionally, all methods of the DEM calculation gave similar solutions. We can state that the majority of the pairs of the Hinode filters allows one to derive the temperature and emission measure in the isothermal plasma approximation using standard diagnostics based on the two filters ratio method. In cases of strong flares one can also expect good conformity of the results obtained using a Withbroe – Sylwester, genetic algorithm and least-squares methods of the DEM evaluation.

  14. FEM × DEM: a new efficient multi-scale approach for geotechnical problems with strain localization

    Directory of Open Access Journals (Sweden)

    Nguyen Trung Kien

    2017-01-01

    Full Text Available The paper presents a multi-scale modeling of Boundary Value Problem (BVP approach involving cohesive-frictional granular materials in the FEM × DEM multi-scale framework. On the DEM side, a 3D model is defined based on the interactions of spherical particles. This DEM model is built through a numerical homogenization process applied to a Volume Element (VE. It is then paired with a Finite Element code. Using this numerical tool that combines two scales within the same framework, we conducted simulations of biaxial and pressuremeter tests on a cohesive-frictional granular medium. In these cases, it is known that strain localization does occur at the macroscopic level, but since FEMs suffer from severe mesh dependency as soon as shear band starts to develop, the second gradient regularization technique has been used. As a consequence, the objectivity of the computation with respect to mesh dependency is restored.

  15. Developmental Eye Movement (DEM Test Norms for Mandarin Chinese-Speaking Chinese Children.

    Directory of Open Access Journals (Sweden)

    Yachun Xie

    Full Text Available The Developmental Eye Movement (DEM test is commonly used as a clinical visual-verbal ocular motor assessment tool to screen and diagnose reading problems at the onset. No established norm exists for using the DEM test with Mandarin Chinese-speaking Chinese children. This study aims to establish the normative values of the DEM test for the Mandarin Chinese-speaking population in China; it also aims to compare the values with three other published norms for English-, Spanish-, and Cantonese-speaking Chinese children. A random stratified sampling method was used to recruit children from eight kindergartens and eight primary schools in the main urban and suburban areas of Nanjing. A total of 1,425 Mandarin Chinese-speaking children aged 5 to 12 years took the DEM test in Mandarin Chinese. A digital recorder was used to record the process. All of the subjects completed a symptomatology survey, and their DEM scores were determined by a trained tester. The scores were computed using the formula in the DEM manual, except that the "vertical scores" were adjusted by taking the vertical errors into consideration. The results were compared with the three other published norms. In our subjects, a general decrease with age was observed for the four eye movement indexes: vertical score, adjusted horizontal score, ratio, and total error. For both the vertical and adjusted horizontal scores, the Mandarin Chinese-speaking children completed the tests much more quickly than the norms for English- and Spanish-speaking children. However, the same group completed the test slightly more slowly than the norms for Cantonese-speaking children. The differences in the means were significant (P0.05; compared with Spanish-speaking children, the scores were statistically significant (P0.05. DEM norms may be affected by differences in language, cultural, and educational systems among various ethnicities. The norms of the DEM test are proposed for use with Mandarin Chinese

  16. How large is the Upper Indus Basin? The pitfalls of auto-delineation using DEMs

    Science.gov (United States)

    Khan, Asif; Richards, Keith S.; Parker, Geoffrey T.; McRobie, Allan; Mukhopadhyay, Biswajit

    2014-02-01

    Extraction of watershed areas from Digital Elevation Models (DEMs) is increasingly required in a variety of environmental analyses. It is facilitated by the availability of DEMs based on remotely sensed data, and by Geographical Information System (GIS) software. However, accurate delineation depends on the quality of the DEM and the methodology adopted. This paper considers automated and supervised delineation in a case study of the Upper Indus Basin (UIB), Pakistan, for which published estimates of the basin area show significant disagreement, ranging from 166,000 to 266,000 km2. Automated delineation used ArcGIS Archydro and hydrology tools applied to three good quality DEMs (two from SRTM data with 90m resolution, and one from 30m resolution ASTER data). Automatic delineation defined a basin area of c.440,000 km2 for the UIB, but included a large area of internal drainage in the western Tibetan Plateau. It is shown that discrepancies between different estimates reflect differences in the initial extent of the DEM used for watershed delineation, and the unchecked effect of iterative pit-filling of the DEM (going beyond the filling of erroneous pixels to filling entire closed basins). For the UIB we have identified critical points where spurious addition of catchment area has arisen, and use Google Earth to examine the geomorphology adjacent to these points, and also examine the basin boundary data provided by the HydroSHEDS database. We show that the Pangong Tso watershed and some other areas in the western Tibetan plateau are not part of the UIB, but are areas of internal drainage. Our best estimate of the area of the Upper Indus Basin (at Besham Qila) is 164,867 km2 based on the SRTM DEM, and 164,853 km2 using the ASTER DEM). This matches the catchment area measured by WAPDA SWHP. An important lesson from this investigation is that one should not rely on automated delineation, as iterative pit-filling can produce spurious drainage networks and basins, when

  17. Evaluation of fracturing process of soft rocks at great depth by AE measurement and DEM simulation

    International Nuclear Information System (INIS)

    Aoki, Kenji; Mito, Yoshitada; Kurokawa, Susumu; Matsui, Hiroya; Niunoya, Sumio; Minami, Masayuki

    2007-01-01

    The authors developed the stress-based evaluation system of EDZ by AE monitoring and Distinct Element Method (DEM) simulation. In order to apply this system to the soft rock site, the authors try to grasp the relationship between AE parameters, stress change and rock fracturing process by performing the high stiffness tri-axial compression tests including AE measurements on the soft rock samples, and its simulations by DEM using bonded particle model. As the result, it is found that change in predominant AE frequency is effective to evaluate fracturing process in sedimentary soft rocks, and the relationship between stress change and fracturing process is also clarified. (author)

  18. Dem Gemeinwohl verpflichtet? Was motiviert die Beschäftigten des öffentlichen Dienstes?

    OpenAIRE

    Vogel, Dominik

    2011-01-01

    Die Arbeit befasst sich theoretisch und empirisch mit der so genannten Public Service Motivation (PSM) und ihrem Zusammenhang zu anderen psychologischen Motivationstheorien. Die Public Service Motivation geht davon aus, dass öffentlich Beschäftigte unter anderem dadurch motiviert sind, dass sie in ihrer Arbeit einen Dienst am Gemeinwohl sehen. Auf Basis einer empirischen Erhebung konnte dieses Konstrukt auch für Beschäftigte in Deutschland nachgewiesen und der Einfluss soziodemographischer Va...

  19. Dem Gemeinwohl verpflichtet? - Was motiviert die Beschäftigten des öffentlichen Dienstes?

    OpenAIRE

    Vogel, Dominik

    2011-01-01

    Die Arbeit befasst sich theoretisch und empirisch mit der so genannten Public Service Motivation (PSM) und ihrem Zusammenhang zu anderen psychologischen Motivationstheorien. Die Public Service Motivation geht davon aus, dass öffentlich Beschäftigte unter anderem dadurch motiviert sind, dass sie in ihrer Arbeit einen Dienst am Gemeinwohl sehen. Auf Basis einer empirischen Erhebung konnte dieses Konstrukt auch für Beschäftigte in Deutschland nachgewiesen und der Einfluss soziodemographischer Va...

  20. Brief Study and Spanish Translation of Die Kunst das Clavier zu Spielen by Friedrich Wilhelm Marpurg (Berlin, Henning, 1750

    Directory of Open Access Journals (Sweden)

    María de las Nieves Pascual León

    2017-01-01

    Full Text Available This paper includes the fi rst Spanish version of F. W. Marpurg’s treaty Die Kunst das Clavier zu spielen, which had been restricted for the common Spanish-speaking reader since its fi rst appearance in 1750. This philological translation of the treaty (with the facsimile of the fi rst edition and its Spanish translation on the opposite page is instroduced by a brief study of the text’s various editions published during the author’s life, and pretends to offer an initial approach to the treaty, to facilitate the public’s access to the work and to contribute to its full disclosure.

  1. Jenseits von "Identität"? : Zu den Un/Möglichkeiten nicht-identitärer Strategien politischen Handelns

    OpenAIRE

    Rostock, Petra

    2014-01-01

    Kulturalisierungen und Zuschreibungen ›kollektiver Identitäten‹ dienen in Debatten um die Einwande­rungsgesellschaft Deutschland immer wieder dazu eine soziale Ordnung zu konstruieren, die zwischen denen unterscheidet, die dazu gehören und jenen, die nicht dazu gehören. Gleichzeitig formiert sich ›Identitätspolitik‹ als eine widerständige politische Praxis. Sie greift im Bewusstsein einer gemeinsamen Geschichte der Ausbeutung und Unterdrückung infolge einer zugewiesenen und konstruierten ›Ide...

  2. Tropical-forest biomass estimation at X-Band from the spaceborne TanDEM-X interferometer

    Science.gov (United States)

    R. Treuhaft; F. Goncalves; J.R. dos Santos; M. Keller; M. Palace; S.N. Madsen; F. Sullivan; P.M.L.A. Graca

    2014-01-01

    This letter reports the sensitivity of X-band interferometric synthetic aperture radar (InSAR) data from the first dual-spacecraft radar interferometer, TanDEM-X, to variations in tropical-forest aboveground biomass (AGB). It also reports the first tropical-forest AGB estimates fromTanDEM-X data. Tropical forests account for...

  3. High-Accuracy Tidal Flat Digital Elevation Model Construction Using TanDEM-X Science Phase Data

    Science.gov (United States)

    Lee, Seung-Kuk; Ryu, Joo-Hyung

    2017-01-01

    This study explored the feasibility of using TanDEM-X (TDX) interferometric observations of tidal flats for digital elevation model (DEM) construction. Our goal was to generate high-precision DEMs in tidal flat areas, because accurate intertidal zone data are essential for monitoring coastal environment sand erosion processes. To monitor dynamic coastal changes caused by waves, currents, and tides, very accurate DEMs with high spatial resolution are required. The bi- and monostatic modes of the TDX interferometer employed during the TDX science phase provided a great opportunity for highly accurate intertidal DEM construction using radar interferometry with no time lag (bistatic mode) or an approximately 10-s temporal baseline (monostatic mode) between the master and slave synthetic aperture radar image acquisitions. In this study, DEM construction in tidal flat areas was first optimized based on the TDX system parameters used in various TDX modes. We successfully generated intertidal zone DEMs with 57-m spatial resolutions and interferometric height accuracies better than 0.15 m for three representative tidal flats on the west coast of the Korean Peninsula. Finally, we validated these TDX DEMs against real-time kinematic-GPS measurements acquired in two tidal flat areas; the correlation coefficient was 0.97 with a root mean square error of 0.20 m.

  4. Development of a LiDAR derived digital elevation model (DEM) as Input to a METRANS geographic information system (GIS).

    Science.gov (United States)

    2011-05-01

    This report describes an assessment of digital elevation models (DEMs) derived from : LiDAR data for a subset of the Ports of Los Angeles and Long Beach. A methodology : based on Monte Carlo simulation was applied to investigate the accuracy of DEMs ...

  5. Illustrations to “Gespräche in dem Reiche derer Todten zwischen dem vortreflichen Moscowitischen Czaar Petro Magno und dem grossen Tyrannen Ivan Basilowiz II” (Peter the Great and Ivan the Terrible) by David Fassmann (1725)

    OpenAIRE

    Ekaterina A. Skvortcova

    2017-01-01

    The journal created by David Fassmann (1683–1744), Gespräche in dem Reiche derer Todten, edited in Leipzig, was a huge success. Each of the 240 issues presents a dialogue between two historical figures from the afterworld. In the 83rd–86th Entrevuë, the interlocutors are Peter the Great and Ivan the Terrible. The texts of the four conversations were thoroughly examined by Eckhard Matthes (1987). The present paper explores how the illustrations to the 83rd–86th Entrevuë visualize the texts, w...

  6. Usability-Studie zu KonSearch : Evaluation der neuen Literatursuchmaschine der Universität Konstanz

    OpenAIRE

    Luca, Helena

    2011-01-01

    Der vorliegende Bericht beschreibt Hintergründe, Methodik und Ergebnisse einer Usability-Evaluation, die im Sommersemester 2011 im Zuge der Einführung der Literatursuchmaschine KonSearch an der Universität Konstanz durchgeführt wurde. Die neue Suchmaschine basiert auf dem Resource Discovery Service Summon der Firma SerialsSolutions. Sie soll den Benutzern der Bibliothek der Universität Konstanz eine effektive, effiziente und zufriedenstellende Suche nach wissenschaftlichen Informationen ermög...

  7. DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

    Science.gov (United States)

    Pizette, Patrick; Govender, Nicolin; Wilke, Daniel N.; Abriak, Nor-Edine

    2017-06-01

    The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time.

  8. DEM Simulation of Biaxial Compression Experiments of Inherently Anisotropic Granular Materials and the Boundary Effects

    Directory of Open Access Journals (Sweden)

    Zhao-Xia Tong

    2013-01-01

    Full Text Available The reliability of discrete element method (DEM numerical simulations is significantly dependent on the particle-scale parameters and boundary conditions. To verify the DEM models, two series of biaxial compression tests on ellipse-shaped steel rods are used. The comparisons on the stress-strain relationship, strength, and deformation pattern of experiments and simulations indicate that the DEM models are able to capture the key macro- and micromechanical behavior of inherently anisotropic granular materials with high fidelity. By using the validated DEM models, the boundary effects on the macrodeformation, strain localization, and nonuniformity of stress distribution inside the specimens are investigated using two rigid boundaries and one flexible boundary. The results demonstrate that the boundary condition plays a significant role on the stress-strain relationship and strength of granular materials with inherent fabric anisotropy if the stresses are calculated by the force applied on the wall. However, the responses of the particle assembly measured inside the specimens are almost the same with little influence from the boundary conditions. The peak friction angle obtained from the compression tests with flexible boundary represents the real friction angle of particle assembly. Due to the weak lateral constraints, the degree of stress nonuniformity under flexible boundary is higher than that under rigid boundary.

  9. An Optimal DEM Reconstruction Method for Linear Array Synthetic Aperture Radar Based on Variational Model

    Directory of Open Access Journals (Sweden)

    Shi Jun

    2015-02-01

    Full Text Available Downward-looking Linear Array Synthetic Aperture Radar (LASAR has many potential applications in the topographic mapping, disaster monitoring and reconnaissance applications, especially in the mountainous area. However, limited by the sizes of platforms, its resolution in the linear array direction is always far lower than those in the range and azimuth directions. This disadvantage leads to the blurring of Three-Dimensional (3D images in the linear array direction, and restricts the application of LASAR. To date, the research on 3D SAR image enhancement has focused on the sparse recovery technique. In this case, the one-to-one mapping of Digital Elevation Model (DEM brakes down. To overcome this, an optimal DEM reconstruction method for LASAR based on the variational model is discussed in an effort to optimize the DEM and the associated scattering coefficient map, and to minimize the Mean Square Error (MSE. Using simulation experiments, it is found that the variational model is more suitable for DEM enhancement applications to all kinds of terrains compared with the Orthogonal Matching Pursuit (OMPand Least Absolute Shrinkage and Selection Operator (LASSO methods.

  10. Modeling bubble heat transfer in gas-solid fluidized beds using DEM

    NARCIS (Netherlands)

    Patil, A.V.; Peters, E.A.J.F.; Kolkman, T.; Kuipers, J.A.M.

    2014-01-01

    Discrete element method (DEM) simulations of a pseudo 2-D fluidized bed at non-isothermal conditions are presented. First implementation details are discussed. This is followed by a validation study where heating of a packed column by a flow of heated fluid is considered. Next hot gas injected into

  11. Rockslide and Impulse Wave Modelling in the Vajont Reservoir by DEM-CFD Analyses

    Science.gov (United States)

    Zhao, T.; Utili, S.; Crosta, G. B.

    2016-06-01

    This paper investigates the generation of hydrodynamic water waves due to rockslides plunging into a water reservoir. Quasi-3D DEM analyses in plane strain by a coupled DEM-CFD code are adopted to simulate the rockslide from its onset to the impact with the still water and the subsequent generation of the wave. The employed numerical tools and upscaling of hydraulic properties allow predicting a physical response in broad agreement with the observations notwithstanding the assumptions and characteristics of the adopted methods. The results obtained by the DEM-CFD coupled approach are compared to those published in the literature and those presented by Crosta et al. (Landslide spreading, impulse waves and modelling of the Vajont rockslide. Rock mechanics, 2014) in a companion paper obtained through an ALE-FEM method. Analyses performed along two cross sections are representative of the limit conditions of the eastern and western slope sectors. The max rockslide average velocity and the water wave velocity reach ca. 22 and 20 m/s, respectively. The maximum computed run up amounts to ca. 120 and 170 m for the eastern and western lobe cross sections, respectively. These values are reasonably similar to those recorded during the event (i.e. ca. 130 and 190 m, respectively). Therefore, the overall study lays out a possible DEM-CFD framework for the modelling of the generation of the hydrodynamic wave due to the impact of a rapid moving rockslide or rock-debris avalanche.

  12. Landsat 5 TM images and DEM in lithologic mapping of Payen Volcanic Field (Mendoza Province, Argentina)

    International Nuclear Information System (INIS)

    Fornaciai, A.; Bisson, M.; Mazzarini, F.; Del Carlo, P.; Pasquare, G.

    2009-01-01

    Satellite image such as Landsat 5 TM scene provides excellent representation of Earth and synoptic view of large geographic areas in different band combination. Landsat TM images allow automatic and semi-automatic classification of land cover, nevertheless the software frequently may some difficulties in distinguishing between similar radiometric surfaces. In this case, the use of Digital Elevation Model (DEM) can be an important tool to identify different surface covers. In this study, several False Color Composite (FCC) of Landsat 5 TM Image, DEM and the respective draped image of them, were used to delineate lithological boundaries and tectonic features of regional significance of the Paven Volcanic Field (PVF). PFV is a Quaternary fissural structure belonging to the black-arc extensional areas of the Andes in the Mendoza Province (Argentina) characterized by many composite basaltic lava flow fields. The necessity to identify different lava flows with the same composition, and then with same spectral features, allows to highlight the improvement of synergic use of TM images and shaded DEM in the visual interpretation. Information obtained from Satellite data and DEM have been compared with previous geological maps and transferred into a topographical base map. Based on these data a new lithological map at 1:100.000 scale has been presented [it

  13. Discrete element simulation of mill charge in 3D using the BLAZE-DEM GPU framework

    CSIR Research Space (South Africa)

    Govender, Nicolin

    2015-08-01

    Full Text Available The Discrete Element Method (DEM) simulation of charge motion in ball, semi autogenous (SAG) and autogenous mills has advanced to a stage where the effects of lifter design, power draft and product size can be evaluated with sufficient accuracy...

  14. Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

    Czech Academy of Sciences Publication Activity Database

    Prokešová, R.; Kardoš, M.; Tábořík, Petr; Medveďová, A.; Stacke, V.; Chudý, F.

    2014-01-01

    Roč. 224, NOV 1 (2014), s. 86-101 ISSN 0169-555X R&D Projects: GA MŠk LM2010008 Institutional support: RVO:67985891 Keywords : earthflow * surface displacement * strain modelling * DEM differencing * kinematic behaviour Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.577, year: 2013

  15. Impact of mesh and DEM resolutions in SEM simulation of 3D seismic response

    NARCIS (Netherlands)

    Khan, Saad; van der Meijde, M.; van der Werff, H.M.A.; Shafique, Muhammad

    2017-01-01

    This study shows that the resolution of a digital elevation model (DEM) and model mesh strongly influences 3D simulations of seismic response. Topographic heterogeneity scatters seismic waves and causes variation in seismic response (am-plification and deamplification of seismic amplitudes) at the

  16. Estimating Horizontal Displacement between DEMs by Means of Particle Image Velocimetry Techniques

    Directory of Open Access Journals (Sweden)

    Juan F. Reinoso

    2015-12-01

    Full Text Available To date, digital terrain model (DTM accuracy has been studied almost exclusively by computing its height variable. However, the largely ignored horizontal component bears a great influence on the positional accuracy of certain linear features, e.g., in hydrological features. In an effort to fill this gap, we propose a means of measurement different from the geomatic approach, involving fluid mechanics (water and air flows or aerodynamics. The particle image velocimetry (PIV algorithm is proposed as an estimator of horizontal differences between digital elevation models (DEM in grid format. After applying a scale factor to the displacement estimated by the PIV algorithm, the mean error predicted is around one-seventh of the cell size of the DEM with the greatest spatial resolution, and around one-nineteenth of the cell size of the DEM with the least spatial resolution. Our methodology allows all kinds of DTMs to be compared once they are transformed into DEM format, while also allowing comparison of data from diverse capture methods, i.e., LiDAR versus photogrammetric data sources.

  17. Use of DEMs Derived from TLS and HRSI Data for Landslide Feature Recognition

    Directory of Open Access Journals (Sweden)

    Maurizio Barbarella

    2018-04-01

    Full Text Available This paper addresses the problems arising from the use of data acquired with two different remote sensing techniques—high-resolution satellite imagery (HRSI and terrestrial laser scanning (TLS—for the extraction of digital elevation models (DEMs used in the geomorphological analysis and recognition of landslides, taking into account the uncertainties associated with DEM production. In order to obtain a georeferenced and edited point cloud, the two data sets require quite different processes, which are more complex for satellite images than for TLS data. The differences between the two processes are highlighted. The point clouds are interpolated on a DEM with a 1 m grid size using kriging. Starting from these DEMs, a number of contour, slope, and aspect maps are extracted, together with their associated uncertainty maps. Comparative analysis of selected landslide features drawn from the two data sources allows recognition and classification of hierarchical and multiscale landslide components. Taking into account the uncertainty related to the map enables areas to be located for which one data source was able to give more reliable results than another. Our case study is located in Southern Italy, in an area known for active landslides.

  18. Wie "zukunftsreich" ist das neue Lehramtsstudium? Bestandsaufnahme zu Medienbildung und digitalen Kompetenzen in den Curriculaentwürfen der Sekundarstufe der PädagogInnenbildung_NEU

    Directory of Open Access Journals (Sweden)

    Klaus Himpsl-Gutermann

    2015-12-01

    Full Text Available Durch die PädagogInnenbildung_NEU eröffnet sich derzeit die Chance, österreichweit in vier Verbundregionen in Kooperation zwischen Universitäten und Pädagogischen Hochschulen die Lehramtsausbildung für alle Schulstufen und Schultypen zukunftsweisend zu reformieren. Zu den Ansprüchen an das neue Studium gehört auch, dass es künftige LehrerInnen an die Schulen entsendet, die neben ihrer fachlichen Expertise mit aktuellen gesellschaftlichen Herausforderungen und Entwicklungen adäquat umgehen können. Die rasant voranschreitende Technologisierung und Digitalisierung unserer Gesellschaft gehört zweifelsohne zu diesen Herausforderungen. Die E-Learning-Strategiegruppe der österreichischen Pädagogischen Hochschulen (PHELS hat deshalb die aktuell vorliegenden Curricula und Curriculaentwürfe der Sekundarstufe Allgemeinbildung in den vier Verbundregionen einer kritischen Analyse hinsichtlich Medienbildung und digitaler Kompetenzen unterzogen − mit einem ernüchternden bis verheerenden Ergebnis: Es scheint nicht nur die historische Chance vertan, Medienbildung systematisch in der LehrerInnenausbildung und damit in den Schulen zu verankern, sondern durch die fehlende informatische Grundbildung laufen künftige Generationen auch Gefahr, auf zunehmend digitalisierten Arbeitsmärkten den internationalen Anschluss zu verlieren.

  19. Demência na doença de Parkinson Dementia in Parkinsn's disease

    Directory of Open Access Journals (Sweden)

    Leonardo Caixeta

    2008-12-01

    Full Text Available OBJETIVO: A presença de síndromes psiquiátricas, incluindo demência, associada a distúrbios motores tem sido cada vez mais reconhecida durante a última década, com destaque para o prejuízo cognitivo na doença de Parkinson idiopática. Esta revisão enfocará a epidemiologia, os aspectos clínicos, diagnósticos diferenciais, mecanismos subjacentes e o tratamento da demência na doença de Parkinson idiopática. MÉTODO: Uma revisão da literatura dos estudos que investigaram a demência da doença de Parkinson idiopática foi realizada. RESULTADOS: A demência é altamente prevalente na doença de Parkinson idiopática. O protótipo da demência na doença de Parkinson idiopática consiste numa síndrome disexecutiva com comprometimento da atenção, funções executivas e, secundariamente, a memória. Neuroquimicamente, o déficit mais significativo parece ser colinérgico; a demência se correlaciona com a presença de corpos de Lewy corticais e límbicos. Evidências preliminares sugerem que os anticolinesterásicos podem ser efetivos na demência da doença de Parkinson idiopática. CONCLUSÕES: O prejuízo cognitivo na doença de Parkinson idiopática é associado a características próprias e é responsável por importante incapacidade nestes pacientes.OBJECTIVE: The concomitant presence of psychiatric syndromes, including dementia, with motor disturbance has been increasingly recognized during the last decade, with emphasis on cognitive impairment in idiopatic Parkinson's disease. This review will focus on the epidemiology, clinical aspects, differential diagnosis, underlying mechanisms and treatment of dementia in Parkinson's disease. METHOD: A literature review of the studies that investigated the dementia in Parkinson's disease was performed. RESULTS: Dementia is highly prevalent in Parkinson's disease. The prototype of dementia in Parkinson's disease is a dysexecutive syndrome with impaired attention, executive functions and

  20. Effect of DEM resolution and comparison between different weighting factors for hydrologic connectivity index

    Science.gov (United States)

    Cantreul, Vincent; Cavalli, Marco; Degré, Aurore

    2016-04-01

    The emerging concept of hydrological connectivity is difficult to quantify. Some indices have been proposed. The most cited is Borselli's one. It mainly uses the DEM as input. The pixel size may strongly impacts the result of the calculation. It has not been studied yet in silty areas. Another important aspect is the choice of the weighting factor which strongly influences the index value. The objective of this poster is so to compare 8 different DEM's resolutions (12, 24, 48, 72, 96, 204, 504 and 996cm) and 3 different weighting factors (factor C of Wischmeier, Manning's factor and rugosity index) in the Borselli's index calculation. The IC was calculated in a 124ha catchment (Hevillers), in the loess belt, in Belgium. The DEM used is coming from a UAV with a maximum resolution of 12 cm. Permanent covered surfaces are not considered in order to avoid artefact due to the vegetation (2% of the surface). Regarding the DEM pixel size, the IC increases for a given pixel when the pixel size decreases. That confirms some results observed in the Alpine region by Cavalli (2014). The mean difference between 12 cm and 10 m resolution is 35% with higher values up to 100% for higher connectivity zones (flow paths). Another result is the lower impact of connections in the watershed (grass strips…) at lower pixel sizes. This is linked to the small width of some connections which are sometimes comparing to cell size. Furthermore, a great loss of precision is observed from the 500 cm pixel size and upper. That remark is quite intuitive. Finally, some very well disconnected zones appear for the highest resolutions. Regarding the weighting factor, IC values calculated using C factor are lower than with the rugosity index which is only a topographic factor. With very high resolution DEM, it permits to represent the fine topography. For the C factor, the zones up to very well disconnected areas (grass strips, wood…) are well represented with lower index values than downstream

  1. DemQSAR: predicting human volume of distribution and clearance of drugs.

    Science.gov (United States)

    Demir-Kavuk, Ozgur; Bentzien, Jörg; Muegge, Ingo; Knapp, Ernst-Walter

    2011-12-01

    In silico methods characterizing molecular compounds with respect to pharmacologically relevant properties can accelerate the identification of new drugs and reduce their development costs. Quantitative structure-activity/-property relationship (QSAR/QSPR) correlate structure and physico-chemical properties of molecular compounds with a specific functional activity/property under study. Typically a large number of molecular features are generated for the compounds. In many cases the number of generated features exceeds the number of molecular compounds with known property values that are available for learning. Machine learning methods tend to overfit the training data in such situations, i.e. the method adjusts to very specific features of the training data, which are not characteristic for the considered property. This problem can be alleviated by diminishing the influence of unimportant, redundant or even misleading features. A better strategy is to eliminate such features completely. Ideally, a molecular property can be described by a small number of features that are chemically interpretable. The purpose of the present contribution is to provide a predictive modeling approach, which combines feature generation, feature selection, model building and control of overtraining into a single application called DemQSAR. DemQSAR is used to predict human volume of distribution (VD(ss)) and human clearance (CL). To control overtraining, quadratic and linear regularization terms were employed. A recursive feature selection approach is used to reduce the number of descriptors. The prediction performance is as good as the best predictions reported in the recent literature. The example presented here demonstrates that DemQSAR can generate a model that uses very few features while maintaining high predictive power. A standalone DemQSAR Java application for model building of any user defined property as well as a web interface for the prediction of human VD(ss) and CL is

  2. DEM GENERATION FROM HIGH RESOLUTION SATELLITE IMAGES THROUGH A NEW 3D LEAST SQUARES MATCHING ALGORITHM

    Directory of Open Access Journals (Sweden)

    T. Kim

    2012-09-01

    Full Text Available Automated generation of digital elevation models (DEMs from high resolution satellite images (HRSIs has been an active research topic for many years. However, stereo matching of HRSIs, in particular based on image-space search, is still difficult due to occlusions and building facades within them. Object-space matching schemes, proposed to overcome these problem, often are very time consuming and critical to the dimensions of voxels. In this paper, we tried a new least square matching (LSM algorithm that works in a 3D object space. The algorithm starts with an initial height value on one location of the object space. From this 3D point, the left and right image points are projected. The true height is calculated by iterative least squares estimation based on the grey level differences between the left and right patches centred on the projected left and right points. We tested the 3D LSM to the Worldview images over 'Terrassa Sud' provided by the ISPRS WG I/4. We also compared the performance of the 3D LSM with the correlation matching based on 2D image space and the correlation matching based on 3D object space. The accuracy of the DEM from each method was analysed against the ground truth. Test results showed that 3D LSM offers more accurate DEMs over the conventional matching algorithms. Results also showed that 3D LSM is sensitive to the accuracy of initial height value to start the estimation. We combined the 3D COM and 3D LSM for accurate and robust DEM generation from HRSIs. The major contribution of this paper is that we proposed and validated that LSM can be applied to object space and that the combination of 3D correlation and 3D LSM can be a good solution for automated DEM generation from HRSIs.

  3. Pollutant condensation as integrated environmental central technology for the air pollution control with the emphasis of recycling of raw materials into production circuit. Final report; Schadstoffkondensation als integrierte Umweltschutzmassnahme zur Luftreinhaltung mit dem Schwerpunkt der Rueckfuehrung von Rohstoffen in Produktionsablaeufe. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Anlauft, H.; Krusche, J.; Ruoss, H.; Schenk, J.; Schmidt, W.; Riedel, R.; Schmalfuss, S.

    1997-01-01

    zur Zeit mit kommerzieller Kaeltetechnik bis -45 C fuer Abluftkonzentrationen groesser 10 g/m{sup 3} angeboten und eingesetzt. Um den Einsatzbereich des wirtschaftlichen Kondensationsverfahrens zu erweitern, sollten mit den Erfahrungen auf dem Gebiet der Tieftemperaturtechnik bis -80 C und mit der Konzeption der Modulbauweise flexible einsetzbare Kondensationsanlagen entwickelt werden. Die Entwicklung des Prototypen wurde begleitet von systematischen Laboruntersuchungen zu Kondensations- und Vereisungsproblemen in einem Modell-Waermetauscher. Als Grundlage fuer die Auslegung der einzelnen Module der Anlage wurde eine Loesungsmittel-Datenbank erstellt, die auch eine schnelle Beurteilung von Einsatzfaellen gestattet. Im Rahmen des Themas wurde ein Prototyp einer Schadstoffkondensationsanlage entwickelt, mit dem ein Teilluftstrom der 6-Farben-Tiefdruckmaschine in der Elbtal-Folie GmbH gereinigt werden kann. Da das Trockenrad zur Entfeuchtung des Abluftstromes entgegen den Angaben des Herstellers nicht funktionsfaehig war, wurde ein eigenes Trockenrad entwickelt. Die Loesungsmittel werden bei -80 C auskondensiert und koennen dem Produktionsprozess wieder zugefuehrt werden. Dabei kann die Moeglichkeit der fraktionierten Kondensation genutzt werden, um Loesungsmittelgemische in variabler Zusammensetzung zu entnehmen. Durch das nachgeschaltete Feinreinigungsmodul werden auch bei Loesungsmitteln mit hohem Dampfdruck die Forderungen der TA-Luft erfuellt. Mit dem Einsatz von Waermerueckgewinnungsmodulen konnte der Energieaufwand minimiert werden. Die Kosten fuer die eingesparten Loesungsmittel sind beachtlich. Mit den gesammelten Erfahrungen wurden die immateriellen Voraussetzungen fuer die Weiterentwicklung der Kondensationsanlagen zur Loesungsmittel- und Wertstoffgewinnung in flexibler Modulbauweise bis zur Serienreife bei der Nema Industrietechnik GmbH geschaffen. (orig.)

  4. Rezension zu: Elisabeth Tuider, Martin Dannecker: Das Recht auf Vielfalt. Aufgaben und Herausforderungen sexueller Bildung. Göttingen: Wallstein Verlag 2016.

    Directory of Open Access Journals (Sweden)

    Marcus Felix

    2017-06-01

    Full Text Available Sexuelle Bildung ist und war schon immer eine umkämpfte Disziplin der Pädagogik. Dabei ist die aktuelle Erregung um diese als Reaktion auf die fortschreitende Pluralisierung von Lebensentwürfen und die Liberalisierung von Normen und Werten zu verstehen, auf die eine diversitätsbewusste Sexualpädagogik in ihren Konzepten Bezug nimmt, die aber von ultrakonservativen, fundamentalistischen und rechtsradikalen Gruppierungen angegriffen werden. Diese Gemengelage nehmen die Autor_innen zum Anlass, um ausgewählte in der Kritik stehende Inhalte einer sexualfreundlichen Bildung zu besprechen und die Argumentationsmuster der Kritiker_innen zu verdeutlichen. Damit trägt der Band zur (Re-Kontextualisierung und Versachlichung einer hochemotionalen Auseinandersetzung über sexuelle Bildung bei.

  5. Rezension zu: Isabelle Stauffer: Weibliche Dandys, blickmächtige Femmes fragiles. Köln u.a.: Böhlau Verlag 2008

    Directory of Open Access Journals (Sweden)

    Jens F. Heiderich

    2009-07-01

    Full Text Available Stauffer legt eine hervorragende Studie zu ironischen Inszenierungen geschlechtsspezifischer Topoi vor. Literaturgeschichtlich präzise werden die Geschlechterverwirrungen im Fin de Siècle unter besonderer Berücksichtigung der Werke Annette Kolbs und Franziska zu Reventlows kontextualisiert und mit Hilfe eines eigens entwickelten methodologischen Ansatzes analysiert. Überzeugend kann Stauffer darlegen, dass den Ironisierungen der Femme fragile und der Femme fatale, des Décadents und des Dandy die Funktion zukommt, Geschlecht als Konstruktion zu enthüllen. Avant la lettre werde dadurch Judith Butlers Theorie der subversiven Performativität bestätigt. Für die Beschreibung der damit verbundenen Konstruktionsverfahren hält Stauffer allerdings den Begriff der Ironie für treffender als den von Butler u. a. favorisierten Begriff der Parodie.

  6. Rezension zu: Heike Brabandt, Bettina Roß, Susanne Zwingel (Hg.: Mehrheit am Rand? Wiesbaden: VS Verlag für Sozialwissenschaften 2008

    Directory of Open Access Journals (Sweden)

    Katja Strobel

    2009-03-01

    Full Text Available Im vorliegenden Sammelband werden aktuelle Diskussionen zu den Themen Globalierung, Exklusion, Geschlechterverhältnisse und Ethnizität zusammengeführt. Vor allem noch wenig rezipierte postkoloniale Ansätze werden berücksichtigt. Das breite Spektrum an Themen und die Vielfalt an Ansätzen, die von empirischen Studien zur Makroökonomik über historische Analysen bis hin zu detaillierten Fallstudien reicht, überzeugt. Der Anspruch, zum Thema globale Ungleichheit Beiträge aus den zentralen sozialwissenschaftlichen Feldern sinnvoll zusammenzuführen, wird eingelöst.

  7. A new DEM of the Austfonna ice cap by combining differential SAR interferometry with ICESat laser altimetry

    Directory of Open Access Journals (Sweden)

    Geir Moholdt

    2012-05-01

    Full Text Available We present a new digital elevation model (DEM of the Austfonna ice cap in the Svalbard Archipelago, Norwegian Arctic. Previous DEMs derived from synthetic aperture radar (SAR and optical shape-from-shading have been tied to airborne radio echo-sounding surface profiles from 1983 which contain an elevation-dependent bias of up to several tens of metres compared with recent elevation data. The new and freely available DEM is constructed purely from spaceborne remote sensing data using differential SAR interferometry (DInSAR in combination with ICESat laser altimetry. Interferograms were generated from pairs of SAR scenes from the one-day repeat tandem phase of the European Remote Sensing Satellites 1/2 (ERS-1/2 in 1996. ICESat elevations from winter 2006–08 were used as ground control points to refine the interferometric baseline. The resulting DEM is validated against the same ground control points and independent surface elevation profiles from Global Navigation Satellite Systems (GNSS and airborne laser altimetry, yielding root mean square (RMS errors of about 10 m in all cases. This quality is sufficient for most glaciological applications, and the new DEM will be a baseline data set for ongoing and future research at Austfonna. The technique of combining satellite DInSAR with high-resolution satellite altimetry for DEM generation might also be a good solution in other glacier regions with similar characteristics, especially when data from TanDEM-X and CryoSat-2 become available.

  8. Assessment of neuro-optometric rehabilitation using the Developmental Eye Movement (DEM) test in adults with acquired brain injury.

    Science.gov (United States)

    Kapoor, Neera; Ciuffreda, Kenneth Joseph

    This pilot study sought to determine the efficacy of using the Developmental Eye Movement (DEM) test in the adult, acquired brain injury (ABI) population to quantify clinically the effects of controlled, laboratory-performed, oculomotor-based vision therapy/vision rehabilitation. Nine adult subjects with mild traumatic brain injury (mTBI) and five with stroke were assessed before and after an eight-week, computer-based, versional oculomotor (fixation, saccades, pursuit, and simulated reading) training program (9.6h total). The protocol incorporated a cross-over, interventional design with and without the addition of auditory feedback regarding two-dimensional eye position. The clinical outcome measure was the Developmental Eye Movement (DEM) test score (ratio, errors) taken before, midway, and immediately following training. For the DEM ratio parameter, improvements were found in 80-89% of the subjects. For the DEM error parameter, improvements were found in 100% of the subjects. Incorporation of the auditory feedback component revealed a trend toward enhanced performance. The findings were similar for both DEM parameters, as well as for incorporation of the auditory feedback, in both diagnostic groups. The results of the present study demonstrated considerable improvements in the DEM test scores following the oculomotor-based training, thus reflecting more time-optimal and accurate saccadic tracking after the training. The DEM test should be considered as another clinical test of global saccadic tracking performance in the ABI population. Copyright © 2017 Spanish General Council of Optometry. All rights reserved.

  9. Wie wichtig ist der Unterricht in Medizinethik und Medizingeschichte im Medizinstudium? Eine empirische Studie zu den Einschätzungen Studierender [How Important is Medical Ethics and History of Medicine Teaching in the Medical Curriculum? An Empirical Approach towards Students' Views

    Directory of Open Access Journals (Sweden)

    Schulz, Stefan

    2012-02-01

    negative impact. Therefore the teaching of GTE should already begin in the 1 semester. The teaching of GTE must take into account that even right at the start of their studies, students judge medical ethics and the history of medicine differently.[german] Zielsetzung: Es wurde untersucht, wie Studierende zu Beginn und im Verlauf ihres Studiums den Unterricht in Medizinethik und Medizingeschichte einschätzen und welchen Einfluss der durchgeführte bzw. fehlende fachspezifische Unterricht in Geschichte, Theorie und Ethik der Medizin (GTE auf die Wertschätzung der Fächer hat.Methodik: Befragt wurden im WS 2005/6 insgesamt 533 Studierende des 1. und 5. Fachsemesters aus dem Bochumer Modell- (GTE-Unterricht ab dem 1. Fachsemester und Regelstudiengang (GTE-Unterricht im 5./6. Fachsemester. Befragt wurde jeweils vor und nach dem 1. bzw. 5. oder 6. Semester. Wir fragten nach der Einschätzung der Bedeutung der Lehre in Medizinethik und Medizingeschichte für die Studierenden, nach der Bedeutung der Fächer für den Arzt sowie nach ihrer Lehr- und Prüfbarkeit (Likert Skala von -2 (stimme überhaupt nicht zu bis +2 (stimme völlig zu.Ergebnisse: 331 Fragebogenpaare wurden in die Studie einbezogen. Zwischen den Studierenden der beiden Studiengänge fanden sich zu Beginn des 1. Semesters keine signifikanten Unterschiede. Die Einschätzungen der Medizinethik und der Medizingeschichte unterschieden sich zu Beginn des Studiums jedoch signifikant: Die Bedeutung der Medizinethik für die eigene Person und für den Arzt wurde als sehr hoch eingeschätzt, deutlich schlechter ihre Lehr- und Prüfbarkeit. Für die Medizingeschichte waren die Ergebnisse genau entgegengesetzt.Durch den GTE-Unterricht verbesserten sich dann in beiden Studiengängen die Einschätzungen in den vorher weniger gut bewerteten Items. Fehlender Unterricht führte zur Verschlechterung der Einschätzung beider Fächer in den vorher gut bewerteten Items.Schlussfolgerung: Im Einklang mit der Literatur unterst

  10. Strategies for product-based environmental protection - integrated product policy and integrated product management. Proceedings of a seminar of Zentrale Informationsstelle Umweltberatung Bayern; Wege zu einem produktbezogenen Umweltschutz - integrierte Produktpolitik und integriertes Produktmanagement. Seminarband der Zentralen Informationsstelle Umweltberatung Bayern. Bd. 18

    Energy Technology Data Exchange (ETDEWEB)

    Stroh, K.; Behling, G.; Koller, U.; Lattner, A. (comps.)

    2001-09-01

    Apart from waste, exhaust and waste heat, also products should be regarded as 'emissions' of the production process, as the environment is burdened both by their use and disposal. An integrated product policy involves optimization of products through their whole product life and the cooperation of all parties involved (politics, industry, trade, consumers, waste managers). Competent experts from all groups discussed this problem in scientific and practical lectures, which are contained in this proceedings volume. [German] Heute geraten neben den Abfaellen, Abgasen oder Abwaessern auch die Produkte als groesste ''Emission'' aus dem Produktionsprozess ins Blickfeld der Umweltpolitik. Besonders in der Phase der Produktnutzung und -entsorgung entstehen bedeutende Umweltbelastungen. Daher ist es das Ziel einer integrierten Produktpolitik, die Produkte bereits bei der Neuentwicklung fuer ihren gesamten Lebenzyklus, also ''von der Wiege bis zur Bahre'', in ihren Umweltauswirkungen zu optimieren. In diesen Prozess sollen alle Beteiligten (Politik, Wirtschaft, Handel, Verbraucher, Entsorger) eingebunden werden. Ueber dieses breite Thema informierten kompetente Referenten aus den relevanten Akteursgruppen. Neben wissenschaftlichen Vortraegen wurden vor allem anhand zahlreicher Beispiele aus der Praxis der Schwierigkeiten und Chancen von umweltfreundlichen Produktneuentwicklungen diskutiert. Im vorliegenden Seminarband sind die Vortraege schriftlich wiedergegeben. (orig.)

  11. Lectures held at the congress on ``Gas hydrates: problem substance / resource``, organised by the GDMK Division for ``Exploration and Extraction`` and the Institute for Mineral Oil and Natural Gas Research, in Clausthal-Zellerfeld (Harz) on 6/7 November 1997. Author`s manuscripts; Vortraege der Veranstaltung ``Gashydrate: Problemstoff/Resource`` des GDMK-Fachbereichs `Aufsuchung und Gewinnung` und dem Institut fuer Erdoel- und Erdgasforschung am 06. und 07. November 1997 in Clausthal-Zellerfeld (Harz). Autorenmanuskripte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The following topics are dealt with in detail: the chemical and physical properties of gas hydrates as derivable from their phase behaviour; the significance and occurrence of gas hydrates in offshore areas; gas hydrates and permafrost in continental northern West Siberia; information on HYACE, a research project of the European Union on test drilling for gas hydrates in offshore areas; sediment-mechanical criteria of gas hydrate formation in deep-sea sediments; gas hydrate formation in gas cavern storages; the use of hydrate inhibitors in operating natural gas storages; and the inhibition of gas hydrates with kinetic inhibitors. Eight abstracts were abstracted individually for the Energy Database. (MSK) [Deutsch] Folgende Themen werden detailliert behandelt: die chemischen und physikalischen Eigenschaften von Gashydraten,welche aus dem Phasenverhalten der Gashydrate herzuleiten sind; zur Bedeutung und Vorkommen von Gashydraten im Offshore-Bereich; Gashydrate und Permafrost im kontinentalen noerdlichen Westsibirien; Informationen zu HYACE, einem Forschungsprojekt der Europaeischen Union zu Probebohrungen nach Gashydraten im Offshore-Bereich; sedimentmechanische Kriterien bei der Gashydratbildung in Tiefseesedimenten; die Gashydratbildung in Gaskavernenspeichern; der Einsatz von Hydratinhibitoren beim Betrieb von Erdgasspeichern sowie die Inhibierung von Gashydraten mit kinetischen Inhibitoren. Fuer die Datenbank Energy wurden acht Beitraege einzeln aufgenommen.

  12. Interaktionen des humanpathogenen Pilzes Aspergillus fumigatus mit dem angeborenen Immunsystem und Thrombozyten

    OpenAIRE

    Czakai, Kristin Bernadette

    2015-01-01

    Pilze sind in unserer Umwelt allgegenwärtig und besiedeln im Fall von Candida albicans (C. albicans) sogar bei über 50% der Menschen die Schleimhäute, während Sporen von Aspergillus fumigatus (A. fumigatus) täglich über die Atmung in die Lunge des Menschen gelangen. Dennoch sind Erkrankungen, die durch diese zwei Pilze ausgelöst werden, bei gesunden Menschen selten. Ist jedoch das Immunsystem beeinträchtigt, können diese Pilze zu systemischen und damit lebensbedrohlichen Erkrankungen wie der ...

  13. Öffentliche Wohnraumförderung — auf dem richtigen Weg?

    OpenAIRE

    van Suntum, Ulrich; Gedaschko, Axel; Voigtländer, Michael; Schrooten, Mechthild; Theurl, Theresia

    2016-01-01

    Die hohen Flüchtlingszahlen und die wachsende Nachfrage nach Wohnungen in den Ballungsräumen haben die Politik veranlasst, die lange vernachlässigte öffentliche Wohnraumförderung wieder in den Blick zu nehmen. Um rasch neuen Wohnraum anzubieten, schlagen die Autoren unterschiedliche Maßnahmen vor. Dabei kommt es darauf an, sie effizient auf die Zielgruppe zuzuschneiden. Welche Gewichtung die Objekt- und die Subjektförderung dabei haben sollte, wird unterschiedlich bewertet. Genossenschaften s...

  14. Prevention, screening and therapy of thyroid diseases and their cost-effectiveness; Praevention, Screening und Therapie gutartiger Schilddruesenerkrankungen unter dem Aspekt von Kosten und Nutzen

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Moka, D.; Schmidt, M.; Theissen, P.; Schicha, H. [Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2003-10-01

    60%. (orig.) [German] Kosten/Nutzenanalysen in Bezug auf gutartige Schilddruesenerkrankungen sind in der Literatur unterrepraesentiert. Insbesondere die Erhebung eines Geldwertes pro gewonnenem Lebensjahr gestaltet sich methodisch schwierig: Der Nutzen praeventiver Massnahmen ist weit in die Zukunft verlagert. Der Einfluss einer unbehandelten Schilddruesenerkrankung auf die Lebenszeit wird ebenfalls erst durch einen langfristigen Horizont und dann eher epidemiologisch als individuell zu erfassen sein. Als Prophylaxe (primaere Praevention) sind Programme zum Ausgleich des Iodmangels sowie die Aufklaerung ueber den negativen Einfluss des Rauchens auf die Entwicklung einer Struma oder eines M. Basedows aus entscheidungstheoretischer Sicht sehr kosteneffektiv. Screening-Programme (sekundaere Praevention) werden fuer die Parameter TSH, Calcium und Calcitonin diskutiert. Eine besonders guenstige Kosten-Effektivitaet des TSH-Screenings ist in besonderen Lebensphasen (Neugeborene, Schwangerschaft, postpartal, hoeheres Alter, stationaerer Patient mit akuter Erkrankung) und bei definierten Vorbefunden (TSH>2mU/l, TPO-Antikoerper) aus klinisch-epidemiologischer Sicht zu erwarten, ohne dass hierzu gesonderte gesundheitsoekonomische Berechnungen vorgelegt wurden. Andererseits konnte die Kosten-Effektivitaet eines generellen TSH-Screening ab dem 35. Lebensjahr in einer qualitativ hochwertigen gesundheitsoekonomischen Studie bereits belegt werden. Die Therapiestrategien bei gutartigen Schilddruesenerkrankungen (tertiaere Praevention) zielen auf eine Minimierung sekundaerer Krankheitsfolgen (Vorhofflimmern, Myokardinfarkt, Herztod) und iatrogener Nebenwirkungen. Beispiele fuer eine solche tertiaere Praevention sind die definitive Therapie (Radioiodtherapie) der Immunhyperthyreose M. Basedow bei unguenstigen initialen Praedikatoren fuer eine Rezidivhyperthyreose, die Radioiodtherapie der latenten Hyperthyreose sowie die Radioiodtherapie der grossvolumigen Struma bei aelteren oder

  15. Micromechanics of non-active clays in saturated state and DEM modelling

    Directory of Open Access Journals (Sweden)

    Pagano Arianna Gea

    2017-01-01

    Full Text Available The paper presents a conceptual micromechanical model for 1-D compression behaviour of non-active clays in saturated state. An experimental investigation was carried out on kaolin clay samples saturated with fluids of different pH and dielectric permittivity. The effect of pore fluid characteristics on one-dimensional compressibility behaviour of kaolin was investigated. A three dimensional Discrete Element Method (DEM was implemented in order to simulate the response of saturated kaolin observed during the experiments. A complex contact model was introduced, considering both the mechanical and physico-chemical microscopic interactions between clay particles. A simple analysis with spherical particles only was performed as a preliminary step in the DEM study in the elastic regime.

  16. Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

    International Nuclear Information System (INIS)

    Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N.

    2004-01-01

    The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values

  17. Doppler Centroid Estimation for Airborne SAR Supported by POS and DEM

    Directory of Open Access Journals (Sweden)

    CHENG Chunquan

    2015-05-01

    Full Text Available It is difficult to estimate the Doppler frequency and modulating rate for airborne SAR by using traditional vector method due to instable flight and complex terrain. In this paper, it is qualitatively analyzed that the impacts of POS, DEM and their errors on airborne SAR Doppler parameters. Then an innovative vector method is presented based on the range-coplanarity equation to estimate the Doppler centroid taking the POS and DEM as auxiliary data. The effectiveness of the proposed method is validated and analyzed via the simulation experiments. The theoretical analysis and experimental results show that the method can be used to estimate the Doppler centroid with high accuracy even in the cases of high relief, instable flight, and large squint SAR.

  18. Effect of particle breakage on cyclic densification of ballast: A DEM approach

    International Nuclear Information System (INIS)

    Thakur, P K; Vinod, J S; Indraratna, B

    2010-01-01

    In this paper, an attempt has been made to investigate the effect of particle breakage on densification behaviour of ballast under cyclic loading using Discrete Element Method (DEM). Numerical simulations using PFC 2D have been carried out on an assembly of angular particles with and without incorporation of particle breakage. Two-dimensional projection of angular ballast particles were simulated using clusters of bonded circular particles. Degradation of the bonds within a cluster was considered to represent particle breakage. Clump logic was used to make the cluster of particles unbreakable. DEM simulation results highlight that the particle breakage has a profound influence on the cyclic densification behaviour of ballast. The deformation behaviour exhibited by the assembly with breakage is in good agreement with the laboratory experiments. In addition, the evolution of particle displacement vectors clearly explains the breakage mechanism and associated deformations during cyclic loading.

  19. Numerical modelling of powder caking at REV scale by using DEM

    Science.gov (United States)

    Guessasma, Mohamed; Silva Tavares, Homayra; Afrassiabian, Zahra; Saleh, Khashayar

    2017-06-01

    This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM). In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV), the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation) in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength).

  20. Numerical modelling of powder caking at REV scale by using DEM

    Directory of Open Access Journals (Sweden)

    Guessasma Mohamed

    2017-01-01

    Full Text Available This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM. In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV, the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength.

  1. Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N

    2004-09-15

    The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values.

  2. Production of 17-O-demethyl-geldanamycin, a cytotoxic ansamycin polyketide, by Streptomyces hygroscopicus DEM20745.

    Science.gov (United States)

    Baksh, Aron; Kepplinger, Bernhard; Isah, Hadiza A; Probert, Michael R; Clegg, William; Wills, Corinne; Goodfellow, Michael; Errington, Jeff; Allenby, Nick; Hall, Michael J

    2017-08-01

    The actinomycete DEM20745, collected from non-rhizosphere soil adjacent to Paraserianthes falactaria trees (Cangkringan, Indonesia), is an efficient producer of the anticancer ansamycin polyketide 17-O-demethyl-geldanamycin (17-O-DMG), a biosynthetic precursor of the Hsp90 inhibitor geldanamycin (GDM). In DEM20745, 17-O-DMG is the major ansamycin product observed reaching a maximum titre of 17 mg/L in the fermentation broth. 17-O-DMG has the potential to be a key starting material for the semi-synthesis of GDM analogues for use in anticancer therapy. Thus, this preferential biosynthesis of 17-O-DMG facilitates easy access to this important molecule and provides further insight in the biosynthesis of the geldanamycins.

  3. Rezension zu: Julia Kristeva: Das weibliche Genie – Melanie Klein. Gießen: Psychosozial-Verlag 2008

    Directory of Open Access Journals (Sweden)

    Lilli Gast

    2009-07-01

    Full Text Available Julia Kristeva widmet sich im zweiten Teil ihrer Trilogie über das weibliche Genie dem Leben und Werk von Melanie Klein, die mit ihren Arbeiten über die früheste Verfasstheit des Psychischen das psychoanalytische Denken für die Psychosen und den Wahn aufschloss und die Rolle des Mütterlichen im psychoanalytischen Diskurs neu definierte. In ihrer Auseinandersetzung mit Klein gelingt Kristeva nicht nur eine ausgesprochen gelungene Einführung in Kleins Denken, sondern auch eine Analyse weiblicher Intellektualität im 20. Jahrhundert. Zudem werden die Schnittstellen im Denken Kleins und Kristevas sichtbar.

  4. "Ich soll nicht zu mir selbst kommen" : Werther, Goethe und die Formung des Subjekts in der Moderne

    OpenAIRE

    Petersdorff, Dirk von (Prof. Dr.)

    2012-01-01

    Die Leiden des jungen Werther: Sie gehen aus einem neuen Reflexions- uns Ausgleichungsbedürfnis hervor, aus der Suche nach einem konsistenten Ich. Werther erlebt die kognitiven und affektiven Veränderungen, die die Moderne heraufführt, und aus diesen Erfahrungen geht sein Verlangen nach Einheit hervor (...). Die Suche nach dem einheitlichen, festen, verläßlichen Ich hält den Briefroman zusammen, und die Gattungswahl korrespondiert mit der Fragestellung, denn das Medium des Briefes hat im 18. ...

  5. Mit Expertenwissen zu Aussagen über künftige Entwicklungen — der Horizon Report Higher Education

    Directory of Open Access Journals (Sweden)

    Rudolf Mumenthaler

    2014-03-01

    Full Text Available Der Horizon Report Higher Education dient auch für Hochschulbibliotheken als wichtige Referenz zur Bewertung aktueller Trends und künftiger Entwicklungen. Der Autor stellt die dem Report zugrunde liegende Methode vor, beleuchtet diese kritisch und reflektiert die Aussagekraft der Prognosen. Die Stärken des Horizon Report liegen in der breiten Abstützung, der Offenheit des Verfahrens und der Publikation sowie der Ausarbeitung der von Expertinnen und Experten ausgewählten Themen. Gewisse Schwächen sieht der Autor in der Abhängigkeit von anderen Trendstudien sowie beim Auswahlverfahren der Trendthemen.

  6. L’eau convoitée de la Guyane vénézuélienne1

    Directory of Open Access Journals (Sweden)

    Anne Pene-Annette

    2004-12-01

    Full Text Available La Guyane vénézuélienne, région dont la planification est contrôlée par l’Etat, joue un rôle majeur dans le développement économique du pays. Le potentiel hydrologique du fleuve Caroni est convoité pour les usages hydroélectriques, industriels et urbains qui se concentrent dans le pôle d’industrie lourde de Ciudad Guayana. La planification dirigiste, qui se reflète aussi dans la gestion du « pétrole bleu », est en concurrence avec la politique de décentralisation.

  7. Fluchen und Flamen, um ein Mann zu sein? Die Verknüpfung von Geschlecht und Sprache durch Vorurteile

    Directory of Open Access Journals (Sweden)

    Nicola Döring

    2001-11-01

    Full Text Available Die hier besprochene Monographie der Linguistin Anja Gottburgsen beschäftigt sich theoretisch und empirisch mit sprachbezogenen Geschlechterstereotypen, also mit unseren Vorstellungen darüber, ob und wie Männer und Frauen jeweils in spezifischer und distinkter Weise sprachlich kommunizieren. Im Theorieteil der Arbeit wird der aktuelle Stand der soziolinguistischen und sozialpsychologischen Diskussion zu Geschlecht, Sprachverhalten und Stereotypisierung kritisch referiert und die Bedeutung von sprachbezogenen Geschlechterstereotypen erläutert. Im empirischen Teil berichtet die Autorin die Ergebnisse von drei Fragebogen-Studien mit deutschsprachigen Studierenden. Es zeigt sich, dass bei Studierenden unabhängig von Geschlecht und Geschlechtsrollenorientierung stereotype Vorstellungen über das sprachliche Verhalten von Männern und Frauen verbreitet sind.

  8. Zu entwicklungstendenzen im satzbau der Deutschen sprache der gegenwart unter besonderer Berücksichtigung der ausrahmung

    Directory of Open Access Journals (Sweden)

    Jasna Makovec

    1983-01-01

    Full Text Available Die vorliegende Arbeit wurde durch das Bestreben motiviert, weitere Ergänzungen zum Phänornen "Ausrahrnung in der modernen deutschen Schriftsprache der Gegenwart" zu leisten. Der Ausgangspunkt dieses "fakultativ" geregelten Bereiches ist die Annahme bzw. die Arbeitshypothese, daß sich linguistische und außerlinguistische Faktoren einander zuordnen lassen. Das bedeutet, daß die Linearität innerhalb des Kornrnunikationspro­ zesses auch einige wichtige kommunikative Funktionen auszuüben hat, und daß die kontextuellen Modifikationen der Stellungsva­ rianten bei gleichern Denotatsbezug unter diesern Blickwinkel untersucht werden müssen, und nicht gleich als stilistische Varianten qualifiziert werden.

  9. Rezension zu: Nicole C. Karafyllis, Gotling Ulshöfer: Sexualized Brains. Cambridge u.a.: MIT Press 2008

    Directory of Open Access Journals (Sweden)

    Sigrid Schmitz

    2009-07-01

    Full Text Available In der Auseinandersetzung um geschlechtliche Normierungen spielt die moderne Hirnforschung eine wirkmächtige und inzwischen disziplinenübergreifende Rolle. Nicole Karafyllis und Gotlind Ulshöfer stellen in diesem Sammelband mit Beiträgen aus Neurowissenschaft, Psychologie, Soziologie, Kulturwissenschaft und Philosophie ein multiperspektivisches Diskursfeld zu der Frage vor, ob die Emotionale Intelligenz (EI als erstrebenswerte Fähigkeit die klassische Kodierung in männliche Rationalität bzw. weibliche Emotionalität dekonstruieren und ein emanzipatorisches Potential entgegen gesellschaftlichen Hierarchisierungen entfalten kann. Viele Aspekte, Verbindungen zwischen den Diskurssträngen und wechselseitige Beeinflussungen, aber auch disziplinäre Eingrenzungen werden sichtbar, die eine kritische Fortführung des hier angestoßenen Dialogs notwendig machen.

  10. All you need is shape: Predicting shear banding in sand with LS-DEM

    Science.gov (United States)

    Kawamoto, Reid; Andò, Edward; Viggiani, Gioacchino; Andrade, José E.

    2018-02-01

    This paper presents discrete element method (DEM) simulations with experimental comparisons at multiple length scales-underscoring the crucial role of particle shape. The simulations build on technological advances in the DEM furnished by level sets (LS-DEM), which enable the mathematical representation of the surface of arbitrarily-shaped particles such as grains of sand. We show that this ability to model shape enables unprecedented capture of the mechanics of granular materials across scales ranging from macroscopic behavior to local behavior to particle behavior. Specifically, the model is able to predict the onset and evolution of shear banding in sands, replicating the most advanced high-fidelity experiments in triaxial compression equipped with sequential X-ray tomography imaging. We present comparisons of the model and experiment at an unprecedented level of quantitative agreement-building a one-to-one model where every particle in the more than 53,000-particle array has its own avatar or numerical twin. Furthermore, the boundary conditions of the experiment are faithfully captured by modeling the membrane effect as well as the platen displacement and tilting. The results show a computational tool that can give insight into the physics and mechanics of granular materials undergoing shear deformation and failure, with computational times comparable to those of the experiment. One quantitative measure that is extracted from the LS-DEM simulations that is currently not available experimentally is the evolution of three dimensional force chains inside and outside of the shear band. We show that the rotations on the force chains are correlated to the rotations in stress principal directions.

  11. Thieves, Parent Abusers, Draft Dodgers... and Homicides?:The authenticity of Dem. 24.105

    OpenAIRE

    Canevaro, Mirko

    2013-01-01

    This article discusses the authenticity of the document preserved at Dem. 24.105. This purportedly reports two laws, one about theft and the other about parent abusers, draft dodgers and homicides. Scholars have often believed it to provide reliable information about the procedures of dike klopes, apagoge phonou and apagoge against atimoi. This analysis shows that the document is inconsistent with other, reliable, information about the same topics and its language does not conform to that of ...

  12. CFD-DEM Onset of Motion Analysis for Application to Bed Scour Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, M. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Lottes, S. A. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    This CFD study with DEM was done as a part of the Federal Highway Administration’s (FHWA’s) effort to improve scour design procedures. The Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) model, available in CD-Adapco’s StarCCM+ software, was used to simulate multiphase systems, mainly those which combine fluids and solids. In this method the motion of discrete solids is accounted for by DEM, which applies Newton's laws of motion to every particle. The flow of the fluid is determined by the local averaged Navier–Stokes equations that can be solved using the traditional CFD approach. The interactions between the fluid phase and solids phase are modeled by use of Newton's third law. The inter-particle contact forces are included in the equations of motion. Soft-particle formulation is used, which allows particles to overlap. In this study DEM was used to model separate sediment grains and spherical particles laying on the bed with the aim to analyze their movement due to flow conditions. Critical shear stress causing the incipient movement of the sediment was established and compared to the available experimental data. An example of scour around a cylindrical pier is considered. Various depths of the scoured bed and flow conditions were taken into account to gain a better understanding of the erosion forces existing around bridge foundations. The decay of these forces with increasing scour depth was quantified with a ‘decay function’, which shows that particles become increasingly less likely to be set in motion by flow forces as a scour hole increases in depth. Computational and experimental examples of the scoured bed around a cylindrical pier are presented.

  13. Deep Convolutional Generative Adversarial Network for Procedural 3D Landscape Generation Based on DEM

    OpenAIRE

    Wulff-Jensen, Andreas; Rant, Niclas Nerup; Møller, Tobias Nordvig; Billeskov, Jonas Aksel

    2018-01-01

    This paper proposes a novel framework for improving procedural generation of 3D landscapes using machine learning. We utilized a Deep Convolutional Generative Adversarial Network (DC-GAN) to generate heightmaps. The network was trained on a dataset consisting of Digital Elevation Maps (DEM) of the alps. During map generation, the batch size and learning rate were optimized for the most efficient and satisfying map production. The diversity of the final output was tested against Perlin noise u...

  14. Erinnerung und Geschichte – Ein früher Bericht aus dem Frauen-KZ Moringen 1936/37

    Directory of Open Access Journals (Sweden)

    Christa Schikorra

    2007-03-01

    Full Text Available Der Erinnerungsbericht von Gabriele Herz ist einerseits bedeutsam wegen der Beschreibung individuelle Erfahrungen und der Einnahme einer persönlichen Perspektive. Andererseits stellt er ein bedeutendes Dokument für die Geschichtsschreibung zu frühen Konzentrationslagern dar, und hier insbesondere zu den Verfolgungserfahrungen jüdischer Frauen im Deutschland der 30er Jahre. In der äußerst aufschlussreichen Einleitung der Historikerin Jane Caplan, die den Anstoß für die Herausgabe dieses einzigartigen Dokuments gab, wird die Komplexität des Erinnerungszeugnisses von Gabriele Herz aufgezeigt und gewürdigt.

  15. Combined SDO/AIA, Hinode/XRT and FOXSI-2 microflare observations - DEM analysis and energetics

    Science.gov (United States)

    Panchapakesan, S. A.; Glesener, L.; Vievering, J. T.; Ryan, D.; Christe, S.; Inglis, A. R.; Buitrago-Casas, J. C.; Musset, S.; Krucker, S.

    2017-12-01

    The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket makes directimaging and spectral observation of the Sun in hard X-rays (HXRs) using highlysensitive focusing HXR optics. The second flight of FOXSI was launchedsuccessfully on 11 December 2014 and observed significant HXR emissions duringmicroflares. Some of these flares showed heating up to severalmillion Kelvin and were visible in the Extreme Ultraviolet (EUV) with the AtmosphericImaging Assembly (SDO/AIA). Spectral observations from FOXSI suggest emission upto 10-12 MK. We utilize SDO/AIA EUV, Hinode/XRT soft X-ray, and FOXSI-2 highenergy X-ray observations to derive the differential emission measure (DEM) ofthe microflares. The AIA and XRT observations provide broad temperaturecoverage but are poorly constrained at the hotter end. We therefore use FOXSI-2to better determine the high temperature component, thus producing a moreconstrained DEM than is possible with typically available observations. We usethis more highly constrained DEM to investigate the energetics of the observedmicroflares.

  16. Dissipation consistent fabric tensor definition from DEM to continuum for granular media

    Science.gov (United States)

    Li, X. S.; Dafalias, Y. F.

    2015-05-01

    In elastoplastic soil models aimed at capturing the impact of fabric anisotropy, a necessary ingredient is a measure of anisotropic fabric in the form of an evolving tensor. While it is possible to formulate such a fabric tensor based on indirect phenomenological observations at the continuum level, it is more effective and insightful to have the tensor defined first based on direct particle level microstructural observations and subsequently deduce a corresponding continuum definition. A practical means able to provide such observations, at least in the context of fabric evolution mechanisms, is the discrete element method (DEM). Some DEM defined fabric tensors such as the one based on the statistics of interparticle contact normals have already gained widespread acceptance as a quantitative measure of fabric anisotropy among researchers of granular material behavior. On the other hand, a fabric tensor in continuum elastoplastic modeling has been treated as a tensor-valued internal variable whose evolution must be properly linked to physical dissipation. Accordingly, the adaptation of a DEM fabric tensor definition to a continuum constitutive modeling theory must be thermodynamically consistent in regards to dissipation mechanisms. The present paper addresses this issue in detail, brings up possible pitfalls if such consistency is violated and proposes remedies and guidelines for such adaptation within a recently developed Anisotropic Critical State Theory (ACST) for granular materials.

  17. Drainage network extraction from a high-resolution DEM using parallel programming in the .NET Framework

    Science.gov (United States)

    Du, Chao; Ye, Aizhong; Gan, Yanjun; You, Jinjun; Duan, Qinyun; Ma, Feng; Hou, Jingwen

    2017-12-01

    High-resolution Digital Elevation Models (DEMs) can be used to extract high-accuracy prerequisite drainage networks. A higher resolution represents a larger number of grids. With an increase in the number of grids, the flow direction determination will require substantial computer resources and computing time. Parallel computing is a feasible method with which to resolve this problem. In this paper, we proposed a parallel programming method within the .NET Framework with a C# Compiler in a Windows environment. The basin is divided into sub-basins, and subsequently the different sub-basins operate on multiple threads concurrently to calculate flow directions. The method was applied to calculate the flow direction of the Yellow River basin from 3 arc-second resolution SRTM DEM. Drainage networks were extracted and compared with HydroSHEDS river network to assess their accuracy. The results demonstrate that this method can calculate the flow direction from high-resolution DEMs efficiently and extract high-precision continuous drainage networks.

  18. Flow Dynamics of green sand in the DISAMATIC moulding process using Discrete element method (DEM)

    International Nuclear Information System (INIS)

    Hovad, E; Walther, J H; Thorborg, J; Hattel, J H; Larsen, P

    2015-01-01

    The DISAMATIC casting process production of sand moulds is simulated with DEM (discrete element method). The main purpose is to simulate the dynamics of the flow of green sand, during the production of the sand mould with DEM. The sand shot is simulated, which is the first stage of the DISAMATIC casting process. Depending on the actual casting geometry the mould can be geometrically quite complex involving e.g. shadowing effects and this is directly reflected in the sand flow during the moulding process. In the present work a mould chamber with “ribs” at the walls is chosen as a baseline geometry to emulate some of these important conditions found in the real moulding process. The sand flow is simulated with the DEM and compared with corresponding video footages from the interior of the chamber during the moulding process. The effect of the rolling resistance and the static friction coefficient is analysed and discussed in relation to the experimental findings. (paper)

  19. Simulation of TanDEM-X interferograms for urban change detection

    Science.gov (United States)

    Welte, Amelie; Hammer, Horst; Thiele, Antje; Hinz, Stefan

    2017-10-01

    Damage detection after natural disasters is one of the remote sensing tasks in which Synthetic Aperture Radar (SAR) sensors play an important role. Since SAR is an active sensor, it can record images at all times of day and in all weather conditions, making it ideally suited for this task. While with the newer generation of SAR satellites such as TerraSAR-X or COSMOSkyMed amplitude change detection has become possible even for urban areas, interferometric phase change detection has not been published widely. This is mainly because of the long revisit times of common SAR sensors leading to temporal decorrelation. This situation has changed dramatically with the advent of the TanDEM-X constellation, which can create single-pass interferograms from space at very high resolutions, avoiding temporal decorrelation almost completely. In this paper the basic structures that are present for any building in InSAR phases, i.e. layover, shadow, and roof areas, are examined. Approaches for their extraction from TanDEM-X interferograms are developed using simulated SAR interferograms. The extracted features of the building signature will in the future be used for urban change detection in real TanDEM-X High Resolution Spotlight interferograms.

  20. A Review of Discrete Element Method (DEM) Particle Shapes and Size Distributions for Lunar Soil

    Science.gov (United States)

    Lane, John E.; Metzger, Philip T.; Wilkinson, R. Allen

    2010-01-01

    As part of ongoing efforts to develop models of lunar soil mechanics, this report reviews two topics that are important to discrete element method (DEM) modeling the behavior of soils (such as lunar soils): (1) methods of modeling particle shapes and (2) analytical representations of particle size distribution. The choice of particle shape complexity is driven primarily by opposing tradeoffs with total number of particles, computer memory, and total simulation computer processing time. The choice is also dependent on available DEM software capabilities. For example, PFC2D/PFC3D and EDEM support clustering of spheres; MIMES incorporates superquadric particle shapes; and BLOKS3D provides polyhedra shapes. Most commercial and custom DEM software supports some type of complex particle shape beyond the standard sphere. Convex polyhedra, clusters of spheres and single parametric particle shapes such as the ellipsoid, polyellipsoid, and superquadric, are all motivated by the desire to introduce asymmetry into the particle shape, as well as edges and corners, in order to better simulate actual granular particle shapes and behavior. An empirical particle size distribution (PSD) formula is shown to fit desert sand data from Bagnold. Particle size data of JSC-1a obtained from a fine particle analyzer at the NASA Kennedy Space Center is also fitted to a similar empirical PSD function.

  1. Bank gully extraction from DEMs utilizing the geomorphologic features of a loess hilly area in China

    Science.gov (United States)

    Yang, Xin; Na, Jiaming; Tang, Guoan; Wang, Tingting; Zhu, Axing

    2018-04-01

    As one of most active gully types in the Chinese Loess Plateau, bank gullies generally indicate soil loss and land degradation. This study addressed the lack of detailed, large scale monitoring of bank gullies and proposed a semi-automatic method for extracting bank gullies, given typical topographic features based on 5 m resolution DEMs. First, channel networks, including bank gullies, are extracted through an iterative channel burn-in algorithm. Second, gully heads are correctly positioned based on the spatial relationship between gully heads and their corresponding gully shoulder lines. Third, bank gullies are distinguished from other gullies using the newly proposed topographic measurement of "relative gully depth (RGD)." The experimental results from the loess hilly area of the Linjiajian watershed in the Chinese Loess Plateau show that the producer accuracy reaches 87.5%. The accuracy is affected by the DEM resolution and RGD parameters, as well as the accuracy of the gully shoulder line. The application in the Madigou watershed with a high DEM resolution validated the duplicability of this method in other areas. The overall performance shows that bank gullies can be extracted with acceptable accuracy over a large area, which provides essential information for research on soil erosion, geomorphology, and environmental ecology.

  2. Pre-2014 mudslides at Oso revealed by InSAR and multi-source DEM analysis

    Science.gov (United States)

    Kim, J. W.; Lu, Z.; QU, F.

    2014-12-01

    The landslide is a process that results in the downward and outward movement of slope-reshaping materials including rocks and soils and annually causes the loss of approximately $3.5 billion and tens of casualties in the United States. The 2014 Oso mudslide was an extreme event costing nearly 40 deaths and damaging civilian properties. Landslides are often unpredictable, but in many cases, catastrophic events are repetitive. Historic record in the Oso mudslide site indicates that there have been serial events in decades, though the extent of sliding events varied from time to time. In our study, the combination of multi-source DEMs, InSAR, and time-series InSAR analysis has enabled to characterize the Oso mudslide. InSAR results from ALOS PALSAR show that there was no significant deformation between mid-2006 and 2011. The combination of time-series InSAR analysis and old-dated DEM indicated revealed topographic changes associated the 2006 sliding event, which is confirmed by the difference of multiple LiDAR DEMs. Precipitation and discharge measurements before the 2006 and 2014 landslide events did not exhibit extremely anomalous records, suggesting the precipitation is not the controlling factor in determining the sliding events at Oso. The lack of surface deformation during 2006-2011 and weak correlation between the precipitation and the sliding event, suggest other factors (such as porosity) might play a critical role on the run-away events at this Oso and other similar landslides.

  3. Calibration of DEM parameters on shear test experiments using Kriging method

    Science.gov (United States)

    Xavier, Bednarek; Sylvain, Martin; Abibatou, Ndiaye; Véronique, Peres; Olivier, Bonnefoy

    2017-06-01

    Calibration of powder mixing simulation using Discrete-Element-Method is still an issue. Achieving good agreement with experimental results is difficult because time-efficient use of DEM involves strong assumptions. This work presents a methodology to calibrate DEM parameters using Efficient Global Optimization (EGO) algorithm based on Kriging interpolation method. Classical shear test experiments are used as calibration experiments. The calibration is made on two parameters - Young modulus and friction coefficient. The determination of the minimal number of grains that has to be used is a critical step. Simulations of a too small amount of grains would indeed not represent the realistic behavior of powder when using huge amout of grains will be strongly time consuming. The optimization goal is the minimization of the objective function which is the distance between simulated and measured behaviors. The EGO algorithm uses the maximization of the Expected Improvement criterion to find next point that has to be simulated. This stochastic criterion handles with the two interpolations made by the Kriging method : prediction of the objective function and estimation of the error made. It is thus able to quantify the improvement in the minimization that new simulations at specified DEM parameters would lead to.

  4. Investigation of the fluidized bed-chemical vapor deposition (FBCVD) process using CFD-DEM method

    International Nuclear Information System (INIS)

    Liu Malin; Liu Rongzheng; Wen Yuanyun; Liu Bing; Shao Youlin

    2014-01-01

    The CFD-DEM-CVD multiscale coupling simulation concept was proposed based on the mass/momentum/energy transfer involved in the FB-CVD process. The pyrolysis process of the reaction gas in the spouted bed can be simulated by CFD method, then the concentration field and velocity field can be extracted and coupled with the particle movement behavior which can be simulated by DEM. Particle deposition process can be described by the CVD model based on particle position, velocity and neighboring gas concentration. This multiscale coupling method can be implemented in the Fluent@-EDEM@ software with their UDF (User Definition Function) and API (Application Programming Interface). Base on the multiscale coupling concept, the criterion for evaluating FB-CVD process is given. At first, the volume in the coating furnace is divided into two parts (active coating area and non-active coating area) based on simulation results of chemical pyrolysis process. Then the residence time of all particles in the active coating area can be obtained using the CFD-DEM simulation method. The residence time distribution can be used as a criterion for evaluating the gas-solid contact efficiency and operation performance of the coating furnace. At last different coating parameters of the coating furnace are compared based on the proposed criterion. And also, the future research emphasis is discussed. (author)

  5. KAJIAN PEMANFAATAN DEM SRTM & GOOGLE EARTH UNTUK PARAMETER PENILAIAN POTENSI KERUGIAN EKONOMI AKIBAT BANJIR ROB

    Directory of Open Access Journals (Sweden)

    Arief L Nugraha

    2013-12-01

    Full Text Available Tidal flood is a significant threat for the economic growth rate in the city of Semarang. The threat mitigation requires planning, thereby reducing the impact of the losses. The availability of global data with free access can provide solutions in disaster management, the data are SRTM DEM and Google Earth. With both of these data can be mapped potential economic losses caused by tidal flooding. With the techniques of remote sensing and GIS to handle the SRTM DEM data and Google Earth, the techniques can be generated maps and models of tidal inundation area maps woke up in the city of Semarang. Analysis of potential economic losses can be calculated by doing an overlay of the two maps generated. The results achieved from this study is SRTM DEM and Google Earth can able to produce thematic maps of situational tidal flood disaster so that it can be used as a parameter value calculation of the potential economic losses. This study also obtain the result that the area of ​​land affected by the tidal flood an area of ​​8339.31 hectares and the number of buildings reaching 78 299 pieces, which the district that has the highest impact on the tidal flood that North Semarang.

  6. A Novel DEM Approach to Simulate Block Propagation on Forested Slopes

    Science.gov (United States)

    Toe, David; Bourrier, Franck; Dorren, Luuk; Berger, Frédéric

    2018-03-01

    In order to model rockfall on forested slopes, we developed a trajectory rockfall model based on the discrete element method (DEM). This model is able to take the complex mechanical processes at work during an impact into account (large deformations, complex contact conditions) and can explicitly simulate block/soil, block/tree contacts as well as contacts between neighbouring trees. In this paper, we describe the DEM model developed and we use it to assess the protective effect of different types of forest. In addition, we compared it with a more classical rockfall simulation model. The results highlight that forests can significantly reduce rockfall hazard and that the spatial structure of coppice forests has to be taken into account in rockfall simulations in order to avoid overestimating the protective role of these forest structures against rockfall hazard. In addition, the protective role of the forests is mainly influenced by the basal area. Finally, the advantages and limitations of the DEM model were compared with classical rockfall modelling approaches.

  7. DEM investigation of weathered rocks using a novel bond contact model

    Directory of Open Access Journals (Sweden)

    Zhenming Shi

    2015-06-01

    Full Text Available The distinct element method (DEM incorporated with a novel bond contact model was applied in this paper to shed light on the microscopic physical origin of macroscopic behaviors of weathered rock, and to achieve the changing laws of microscopic parameters from observed decaying properties of rocks during weathering. The changing laws of macroscopic mechanical properties of typical rocks were summarized based on the existing research achievements. Parametric simulations were then conducted to analyze the relationships between macroscopic and microscopic parameters, and to derive the changing laws of microscopic parameters for the DEM model. Equipped with the microscopic weathering laws, a series of DEM simulations of basic laboratory tests on weathered rock samples was performed in comparison with analytical solutions. The results reveal that the relationships between macroscopic and microscopic parameters of rocks against the weathering period can be successfully attained by parametric simulations. In addition, weathering has a significant impact on both stress–strain relationship and failure pattern of rocks.

  8. Alle Wege führen nach Rom: Trifft dies auch für die Veränderungsmessung zu?

    DEFF Research Database (Denmark)

    Boecker, Maren; Volz-Sidiropoulou, Eftychia; Nielsen, Tine

    Die Erfassung von Veränderungen mithilfe von Fragebögen spielt eine wichtige Rolle in der klinischen Praxis und Forschung. Ziel dieser Studie war es zu untersuchen, ob im Rahmen der Veränderungsmessung die verwendete Datenanalysemethode einen Einfluss auf die Studienergebnisse hat. Insbesondere w...

  9. Nachtraege zu den „Tertiaerschichten auf Java.” 1ter Nachtrag: Mollusken. Nach Sammlungen der Indischen Bergbeamten, Hunghuhn’s und Reinwardt’s

    NARCIS (Netherlands)

    Martin, K.

    1881-01-01

    Durch Vermittelung Verbeek’s erhielt ich eine grosse Reihe von Versteinerungen, welche von Bergbeamten Indiens (hauptsächlich von R. Everwijn und P. van Dijk) gesammelt waren und sich bis vor Kurzem, ohne näher untersucht zu sein, in Batavia befanden ¹). Diese Sammlung umfasste neben vielem

  10. [Antjekathrin Grassmann. Zu den wirtschaftlichen und persönlichen Beziehungen Lübecks ins Baltikum im Lichte einer unbeachteten mittelalterlichen Quellegruppe]/ Dennis Hortmuth

    Index Scriptorium Estoniae

    Hormuth, Dennis

    2012-01-01

    Arvustus: Antjekathrin Grassmann. Zu den wirtschaftlichen und persönlichen Beziehungen Lübecks ins Baltikum im Lichte einer unbeachteten mittelalterlichen Quellegruppe. In: Leder ist Brot. Beiträge zur norddeutschen Landes- und Archivgeseten. Schwerin 2011. S. 125-135

  11. VT Data - Lidar Hydro-flattened DEM (0.7m) 2016, Essex, Caledonia, Orange, and Windsor Counties

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Middle CT River subbasin 2016 0.7m and Digital Elevation Model (DEM) dataset of the...

  12. Joint use of multi-orbit high-resolution SAR interferometry for DEM generation in mountainous area

    KAUST Repository

    Zhang, Lu; Jiang, Houjun; Liao, Mingsheng; Balz, Timo; Wang, Teng

    2014-01-01

    SAR interferometry has long been regarded as an effective tool for wide-area topographic mapping in hilly and mountainous areas. However, quality of InSAR DEM product is usually affected by atmospheric disturbances and decorrelation-induced voids, especially for data acquired in repeat-pass mode. In this paper, we proposed an approach for improved topographic mapping by optimal fusion of multi-orbit InSAR DEMs with correction of atmospheric phase screen (APS). An experimental study with highresolution TerraSAR-X and COSMO-SkyMed datasets covering a mountainous area was carried out to demonstrate the effectiveness of the proposed approach. Validation with a reference DEM of scale 1:50,000 indicated that vertical accuracy of the fused DEM can be better than 5 m.

  13. Joint use of multi-orbit high-resolution SAR interferometry for DEM generation in mountainous area

    KAUST Repository

    Zhang, Lu

    2014-07-01

    SAR interferometry has long been regarded as an effective tool for wide-area topographic mapping in hilly and mountainous areas. However, quality of InSAR DEM product is usually affected by atmospheric disturbances and decorrelation-induced voids, especially for data acquired in repeat-pass mode. In this paper, we proposed an approach for improved topographic mapping by optimal fusion of multi-orbit InSAR DEMs with correction of atmospheric phase screen (APS). An experimental study with highresolution TerraSAR-X and COSMO-SkyMed datasets covering a mountainous area was carried out to demonstrate the effectiveness of the proposed approach. Validation with a reference DEM of scale 1:50,000 indicated that vertical accuracy of the fused DEM can be better than 5 m.

  14. Extraction and Validation of Geomorphological Features from EU-DEM in The Vicinity of the Mygdonia Basin, Northern Greece

    Science.gov (United States)

    Mouratidis, Antonios; Karadimou, Georgia; Ampatzidis, Dimitrios

    2017-12-01

    The European Union Digital Elevation Model (EU-DEM) is a relatively new, hybrid elevation product, principally based on SRTM DEM and ASTER GDEM data, but also on publically available Russian topographic maps for regions north of 60° N. More specifically, EU-DEM is a Digital Surface Model (DSM) over Europe from the Global Monitoring for Environment and Security (GMES) Reference Data Access (RDA) project - a realisation of the Copernicus (former GMES) programme, managed by the European Commission/DG Enterprise and Industry. Even if EU-DEM is indeed more reliable in terms of elevation accuracy than its constituents, it ought to be noted that it is not representative of the original elevation measurements, but is rather a secondary (mathematical) product. Therefore, for specific applications, such as those of geomorphological interest, artefacts may be induced. To this end, the purpose of this paper is to investigate the performance of EU-DEM for geomorphological applications and compare it against other available datasets, i.e. topographic maps and (almost) global DEMs such as SRTM, ASTER-GDEM and WorldDEM™. This initial investigation is carried out in Central Macedonia, Northern Greece, in the vicinity of the Mygdonia basin, which corresponds to an area of particular interest for several geoscience applications. This area has also been serving as a test site for the systematic validation of DEMs for more than a decade. Consequently, extensive elevation datasets and experience have been accumulated over the years, rendering the evaluation of new elevation products a coherent and useful exercise on a local to regional scale. In this context, relief classification, drainage basin delineation, slope and slope aspect, as well as extraction and classification of drainage network are performed and validated among the aforementioned elevation sources. The achieved results focus on qualitative and quantitative aspects of automatic geomorphological feature extraction from

  15. Combined DEM Extration Method from StereoSAR and InSAR

    Science.gov (United States)

    Zhao, Z.; Zhang, J. X.; Duan, M. Y.; Huang, G. M.; Yang, S. C.

    2015-06-01

    A pair of SAR images acquired from different positions can be used to generate digital elevation model (DEM). Two techniques exploiting this characteristic have been introduced: stereo SAR and interferometric SAR. They permit to recover the third dimension (topography) and, at the same time, to identify the absolute position (geolocation) of pixels included in the imaged area, thus allowing the generation of DEMs. In this paper, StereoSAR and InSAR combined adjustment model are constructed, and unify DEM extraction from InSAR and StereoSAR into the same coordinate system, and then improve three dimensional positioning accuracy of the target. We assume that there are four images 1, 2, 3 and 4. One pair of SAR images 1,2 meet the required conditions for InSAR technology, while the other pair of SAR images 3,4 can form stereo image pairs. The phase model is based on InSAR rigorous imaging geometric model. The master image 1 and the slave image 2 will be used in InSAR processing, but the slave image 2 is only used in the course of establishment, and the pixels of the slave image 2 are relevant to the corresponding pixels of the master image 1 through image coregistration coefficient, and it calculates the corresponding phase. It doesn't require the slave image in the construction of the phase model. In Range-Doppler (RD) model, the range equation and Doppler equation are a function of target geolocation, while in the phase equation, the phase is also a function of target geolocation. We exploit combined adjustment model to deviation of target geolocation, thus the problem of target solution is changed to solve three unkonwns through seven equations. The model was tested for DEM extraction under spaceborne InSAR and StereoSAR data and compared with InSAR and StereoSAR methods respectively. The results showed that the model delivered a better performance on experimental imagery and can be used for DEM extraction applications.

  16. Digital Elevation Model (DEM), DEM data are useful for terrain analysis and modeling including slope and aspect calculations. They may be used to produced shaded relief maps and contour maps., Published in 2001, 1:24000 (1in=2000ft) scale, Louisiana State University (LSU).

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2001. DEM data are useful for terrain analysis and modeling including slope and aspect calculations. They may be...

  17. Durch Kooperation und Vernetzung zu neuen Aufgabenfeldern – Serviceentwicklung in der Bibliothek der Medizinischen Fakultät Mannheim [Opening up new tasks through cooperation and networking – service development in the Library for the Medical Faculty of Mannheim

    Directory of Open Access Journals (Sweden)

    Semmler-Schmetz, Martina

    2013-09-01

    - und Beratungsangebote entwickelt werden. Die jüngste Kooperation mit Akteuren auf dem Gebiet der evidenzbasierten Medizin hat einen innovativen Service „Systematische Literaturrecherche“ hervorgebracht, der Ärzte und Wissenschaftler bei der Erstellung von Förderanträgen zu klinischen Studien sowie systematischen Übersichtsarbeiten und Leitlinien unterstützt. Mit entsprechenden kostenpflichtigen Services testet die Bibliothek nun auch eine Öffnung ihrer neuen Angebote für Ärzte, Wissenschaftler und Angehörige von Gesundheitsberufen in der Region.

  18. FE-DEM Analysis of the Effect of Tread Pattern on the Tractive Performance of Tires Operating on Sand

    Science.gov (United States)

    Nakashima, Hiroshi; Takatsu, Yuzuru; Shinone, Hisanori; Matsukawa, Hisao; Kasetani, Takahiro

    Soil-tire system interaction is a fundamental and important research topic in terramechanics. We applied a 2D finite element, discrete element method (FE-DEM), using FEM for the tire and the bottom soil layer and DEM for the surface soil layer. Satisfactory performance analysis was achieved. In this study, to clarify the capabilities and limitations of the method for soil-tire interaction analysis, the tractive performance of real automobile tires with two different tread patterns—smooth and grooved—was analyzed by FE-DEM, and the numerical results compared with the experimental results obtained using an indoor traction measurement system. The analysis of tractive performance could be performed with sufficient accuracy by the proposed 2D dynamic FE-DEM. FE-DEM obtained larger drawbar pull for a tire with a grooved tread pattern, which was verified by the experimental results. Moreover, the result for the grooved tire showed almost the same gross tractive effort and similar running resistance as in experiments. However, for a tire with smooth tread pattern, the analyzed gross tractive effort and running resistance behaved differently than the experimental results, largely due to the difference in tire sinkage in FE-DEM.

  19. EVALUATION OF AIRBORNE L- BAND MULTI-BASELINE POL-INSAR FOR DEM EXTRACTION BENEATH FOREST CANOPY

    Directory of Open Access Journals (Sweden)

    W. M. Li

    2018-04-01

    Full Text Available DEM beneath forest canopy is difficult to extract with optical stereo pairs, InSAR and Pol-InSAR techniques. Tomographic SAR (TomoSAR based on different penetration and view angles could reflect vertical structure and ground structure. This paper aims at evaluating the possibility of TomoSAR for underlying DEM extraction. Airborne L-band repeat-pass Pol-InSAR collected in BioSAR 2008 campaign was applied to reconstruct the 3D structure of forest. And sum of kronecker product and algebraic synthesis algorithm were used to extract ground structure, and phase linking algorithm was applied to estimate ground phase. Then Goldstein cut-branch approach was used to unwrap the phases and then estimated underlying DEM. The average difference between the extracted underlying DEM and Lidar DEM is about 3.39 m in our test site. And the result indicates that it is possible for underlying DEM estimation with airborne L-band repeat-pass TomoSAR technique.

  20. Evaluation of Airborne l- Band Multi-Baseline Pol-Insar for dem Extraction Beneath Forest Canopy

    Science.gov (United States)

    Li, W. M.; Chen, E. X.; Li, Z. Y.; Jiang, C.; Jia, Y.

    2018-04-01

    DEM beneath forest canopy is difficult to extract with optical stereo pairs, InSAR and Pol-InSAR techniques. Tomographic SAR (TomoSAR) based on different penetration and view angles could reflect vertical structure and ground structure. This paper aims at evaluating the possibility of TomoSAR for underlying DEM extraction. Airborne L-band repeat-pass Pol-InSAR collected in BioSAR 2008 campaign was applied to reconstruct the 3D structure of forest. And sum of kronecker product and algebraic synthesis algorithm were used to extract ground structure, and phase linking algorithm was applied to estimate ground phase. Then Goldstein cut-branch approach was used to unwrap the phases and then estimated underlying DEM. The average difference between the extracted underlying DEM and Lidar DEM is about 3.39 m in our test site. And the result indicates that it is possible for underlying DEM estimation with airborne L-band repeat-pass TomoSAR technique.

  1. On the COSMO-SkyMed Exploitation for Interferometric DEM Generation

    Science.gov (United States)

    Teresa, C. M.; Raffaele, N.; Oscar, N. D.; Fabio, B.

    2011-12-01

    DEM products for Earth observation space-borne applications are being to play a role of increasing importance due to the new generation of high resolution sensors (both optical and SAR). These new sensors demand elevation data for processing and, on the other hand, they provide new possibilities for DEM generation. Till now, for what concerns interferometric DEM, the Shuttle Radar Topography Mission (SRTM) has been the reference product for scientific applications all over the world. SRTM mission [1] had the challenging goal to meet the requirements for a homogeneous and reliable DEM fulfilling the DTED-2 specifications. However, new generation of high resolution sensors (including SAR) pose new requirements for elevation data in terms of vertical precision and spatial resolution. DEM are usually used as ancillary input in different processing steps as for instance geocoding and Differential SAR Interferometry. In this context, the recent SAR missions of DLR (TerraSAR-X and TanDEM-X) and ASI (COSMO-SkyMed) can play a promising role thanks to their high resolution both in space and time. In particular, the present work investigates the potentialities of the COSMO/SkyMed (CSK) constellation for ground elevation measurement with particular attention devoted to the impact of the improved spatial resolution wrt the previous SAR sensors. The recent scientific works, [2] and [3], have shown the advantages of using CSK in the monitoring of terrain deformations caused by landslides, earthquakes, etc. On the other hand, thanks to the high spatial resolution, CSK appears to be very promising in monitoring man-made structures, such as buildings, bridges, railways and highways, thus enabling new potential applications (urban applications, precise DEM, etc.). We present results obtained by processing both SPOTLIGHT and STRIPMAP acquisitions through standard SAR Interferometry as well as multi-pass interferometry [4] with the aim of measuring ground elevation. Acknowledgments

  2. Coastal Digital Elevation Models (DEMs) for tsunami hazard assessment on the French coasts

    Science.gov (United States)

    Maspataud, Aurélie; Biscara, Laurie; Hébert, Hélène; Schmitt, Thierry; Créach, Ronan

    2015-04-01

    Building precise and up-to-date coastal DEMs is a prerequisite for accurate modeling and forecasting of hydrodynamic processes at local scale. Marine flooding, originating from tsunamis, storm surges or waves, is one of them. Some high resolution DEMs are being generated for multiple coast configurations (gulf, embayment, strait, estuary, harbor approaches, low-lying areas…) along French Atlantic and Channel coasts. This work is undertaken within the framework of the TANDEM project (Tsunamis in the Atlantic and the English ChaNnel: Definition of the Effects through numerical Modeling) (2014-2017). DEMs boundaries were defined considering the vicinity of French civil nuclear facilities, site effects considerations and potential tsunamigenic sources. Those were identified from available historical observations. Seamless integrated topographic and bathymetric coastal DEMs will be used by institutions taking part in the study to simulate expected wave height at regional and local scale on the French coasts, for a set of defined scenarii. The main tasks were (1) the development of a new capacity of production of DEM, (2) aiming at the release of high resolution and precision digital field models referred to vertical reference frameworks, that require (3) horizontal and vertical datum conversions (all source elevation data need to be transformed to a common datum), on the basis of (4) the building of (national and/or local) conversion grids of datum relationships based on known measurements. Challenges in coastal DEMs development deal with good practices throughout model development that can help minimizing uncertainties. This is particularly true as scattered elevation data with variable density, from multiple sources (national hydrographic services, state and local government agencies, research organizations and private engineering companies) and from many different types (paper fieldsheets to be digitized, single beam echo sounder, multibeam sonar, airborne laser

  3. Landform classification using a sub-pixel spatial attraction model to increase spatial resolution of digital elevation model (DEM

    Directory of Open Access Journals (Sweden)

    Marzieh Mokarrama

    2018-04-01

    Full Text Available The purpose of the present study is preparing a landform classification by using digital elevation model (DEM which has a high spatial resolution. To reach the mentioned aim, a sub-pixel spatial attraction model was used as a novel method for preparing DEM with a high spatial resolution in the north of Darab, Fars province, Iran. The sub-pixel attraction models convert the pixel into sub-pixels based on the neighboring pixels fraction values, which can only be attracted by a central pixel. Based on this approach, a mere maximum of eight neighboring pixels can be selected for calculating of the attraction value. In the mentioned model, other pixels are supposed to be far from the central pixel to receive any attraction. In the present study by using a sub-pixel attraction model, the spatial resolution of a DEM was increased. The design of the algorithm is accomplished by using a DEM with a spatial resolution of 30 m (the Advanced Space borne Thermal Emission and Reflection Radiometer; (ASTER and a 90 m (the Shuttle Radar Topography Mission; (SRTM. In the attraction model, scale factors of (S = 2, S = 3, and S = 4 with two neighboring methods of touching (T = 1 and quadrant (T = 2 are applied to the DEMs by using MATLAB software. The algorithm is evaluated by taking the best advantages of 487 sample points, which are measured by surveyors. The spatial attraction model with scale factor of (S = 2 gives better results compared to those scale factors which are greater than 2. Besides, the touching neighborhood method is turned to be more accurate than the quadrant method. In fact, dividing each pixel into more than two sub-pixels decreases the accuracy of the resulted DEM. On the other hand, in these cases DEM, is itself in charge of increasing the value of root-mean-square error (RMSE and shows that attraction models could not be used for S which is greater than 2. Thus considering results, the proposed model is highly capable of

  4. Anwendung der extrakorporalen Stoßwellentherapie bei kalzifizierender Periathropathia humeroscapularis, Fersensporn und Epicondylitis humeri - Erfahrungsbericht aus dem Wilhelminenspital

    Directory of Open Access Journals (Sweden)

    Feyertag J

    2004-01-01

    Full Text Available Die Stoßwellentherapie wird bei verschiedenen Indikationen, die unter konservativen Therapien schwer zu schwer zu behandeln sind, eingesetzt. Dazu zählen die kalzifizierenden Schultererkrankungen (Tendinitis calcarea, Epicondylitis humeri (EHR und die plantare Fasciitis mit/ohne plantarem Fersensporn (FSP. Berichtet werden die Ergebnisse von 147 Patienten (102 Frauen/45 Männer, mittleres Alter betrug 57,8 Jahre, die mittels einer einmaligen extrakorporalen Stoßwellentherapie (ESWT (Tend. calc. 82 %, FSP 11 % oder EHR 7 % mittels eines HMT-ReflecTron therapiert wurden. Verabreicht wurden im Mittel 1.800 Stoßwellen. Untersucht wurde die subjektive Verbesserung der Schmerzen anhand einer visuellen Analogskala vor und 6 Wochen nach der Therapie bei allen Patienten. Bei Patienten mit Tendinitis calcarea wurde auch eine Verbesserung der Funktion sowie Veränderungen der Kalzifizierungen untersucht. Bei allen Patienten konnte eine statistisch signifikante Verbesserung der Schmerzen sowie des Bewegungsumfanges beobachtet werden (p 0,0001. Röntgenaufnahmen ergaben eine partielle Verkleinerung der Kalkdepots bei ca. 80 % der Patienten. Aufgrund der geringen Zahl der Patienten fand sich für die EHR keine signifikante Verbesserung der Schmerzsymptomatik. Eine einmalige ESWT kann zu einer deutlichen Verbesserung der Schmerzsymptomatik und zu einer Verbesserung des Bewegungsumfanges führen. Bei 80 % der Patienten mit einer Tendinitis calcarea findet sich weiter eine partielle Verkleinerung der Kalkdepots 6 Wochen nach Therapie.

  5. A new 100-m Digital Elevation Model of the Antarctic Peninsula derived from ASTER Global DEM: methods and accuracy assessment

    Directory of Open Access Journals (Sweden)

    A. J. Cook

    2012-10-01

    Full Text Available A high resolution surface topography Digital Elevation Model (DEM is required to underpin studies of the complex glacier system on the Antarctic Peninsula. A complete DEM with better than 200 m pixel size and high positional and vertical accuracy would enable mapping of all significant glacial basins and provide a dataset for glacier morphology analyses. No currently available DEM meets these specifications. We present a new 100-m DEM of the Antarctic Peninsula (63–70° S, based on ASTER Global Digital Elevation Model (GDEM data. The raw GDEM products are of high-quality on the rugged terrain and coastal-regions of the Antarctic Peninsula and have good geospatial accuracy, but they also contain large errors on ice-covered terrain and we seek to minimise these artefacts. Conventional data correction techniques do not work so we have developed a method that significantly improves the dataset, smoothing the erroneous regions and hence creating a DEM with a pixel size of 100 m that will be suitable for many glaciological applications. We evaluate the new DEM using ICESat-derived elevations, and perform horizontal and vertical accuracy assessments based on GPS positions, SPOT-5 DEMs and the Landsat Image Mosaic of Antarctica (LIMA imagery. The new DEM has a mean elevation difference of −4 m (± 25 m RMSE from ICESat (compared to −13 m mean and ±97 m RMSE for the original ASTER GDEM, and a horizontal error of less than 2 pixels, although elevation accuracies are lower on mountain peaks and steep-sided slopes. The correction method significantly reduces errors on low relief slopes and therefore the DEM can be regarded as suitable for topographical studies such as measuring the geometry and ice flow properties of glaciers on the Antarctic Peninsula. The DEM is available for download from the NSIDC website: http://nsidc.org/data/nsidc-0516.html (Mehr Last als Lust – Ein weiterer Sammelband zu „(Frauen-Körper“ More Encumbrance than Enjoyment

    Directory of Open Access Journals (Sweden)

    Paula-Irene Villa

    2006-11-01

    Full Text Available Dieser Band vereint acht heterogene Aufsätze zu „Lust und Last am eigenen Körper“ von Frauen. Alle Beiträge gehören zum Spektrum psychologischer Reflexion; die Themen reichen dabei von Sport über Kochen und Essen bis Schönheit, die Zugänge von Psychoanalyse über experimentelle Psychologie bis hin zu freier Assoziation auf der Grundlage klinisch-praktischer Arbeit. Ein roter Faden durch die Beiträge ist nicht erkennbar und so wirkt die Vielfalt beliebig. So unterschiedlich die Beiträge sind, so unterschiedlich ist auch ihre Qualität. Leider kommen einige Artikel über die unkritische Zusammenstellung anderer Arbeiten nicht hinaus, die meisten nehmen kaum Bezug auf das inzwischen breite und institutionalisierte Feld der (sozial- und kulturwissenschaftlichen Körperforschung. Doch haben manche Aufsätze interessante empirische Einblicke zu bieten, die zur weiteren Reflexion anregen, und einige wenige Beiträge sind so differenziert, dass sich mit ihnen weiterdenken und -forschen lässt. Insgesamt bereitet die Lektüre des Buches weder ‚Einsteiger/-innen‘ noch ‚Fortgeschrittenen‘ der wissenschaftlichen Beschäftigung mit (Frauen-Körpern Lust, sondern erweist sich – bis auf Ausnahmen, die allerdings auch in ausführlicherer Form anderenorts publiziert wurden – eher als Last. Ärgerlich und alles andere als argumentativ überzeugend ist darüber hinaus das in manchen Texten enthaltene, mehr oder minder explizit artikulierte, ‚Feminismus- bzw. Frauenforschungs-Bashing‘.This volume joins together eight heterogeneous essays by women under the theme “enjoyment and encumbrance of the body.” All of the contributions belong within the spectrum of psychological reflection; the themes range from sports, cooking and eating, and beauty, to the process of psychoanalysis, experimental psychology, and free-association based on clinical practice. The thread throughout the contributions remains indiscernible and thus the

  6. Gear's method with a BICG variant - solutions, algorithms, applications in temperature calculation in fire protection and thermal insulation; Das Verfahren von Gear mit BICG-Loeser - Grundlagen, Algorithmen und Anwendungen auf Temperaturberechnungen aus dem Brand- und Waermeschutz

    Energy Technology Data Exchange (ETDEWEB)

    Liebau, F. [Technische Univ. Berlin (Germany). Fachbereich 3 - Mathematik; Rudolphi, R. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2001-07-01

    If we apply the multistep method of W. Gear for the integration of a system of ordinary differential equations to the nonlinear heat conduction equation in the implementation EPISODE, this results in memory problems due to the band structure of the Jacobian, because EPISODE uses a LU-decomposition with pivoting. The report describes measures which suit this method to the actual conditions. If we use the storage scheme for sparse matrices from Liebau, Rudolphi, only the nonzero elements of the Jacobian are stored. In case of a linear problem, this matrix only has to be computed once. The BI-CGSTAB-method, an iterative method, replaces the LU-decomposition resp. the solution of the linear (and possibly non-symmetric) system of equations resulting from the corrector step. If {tau} is the time step length and h the space step length, this BICG-variant has good convergence properties for a moderate ratio of {tau}/h{sup 2}. The report also includes a short description of the program INSTATCP developed in Borland Delphi 4/Object Pascal. Two applications from the field of fire protection and thermal insulation in buildings (fire insulated steel column and vertically perforated brick) show that the modifications of the Gear method work effectively. (orig.) [German] Wird das Mehrschnittverfahren von W. Gear zur Integration eines Systems gewoehnlicher Differentialgleichungen in der Implementation EPISODE auf die nichtlineare Waermeleitungsgleichung angewandt, so ergeben sich aufgrund der Bandstruktur der Jacobi-Matrix Speicherplatzprobleme, da EPISODE eine LU-Zerlegung mit Pivot-Wahl benutzt. Der Bericht beschreibt Massnahmen, mit denen das Verfahren an die hier vorliegende Situation angepasst wird. Durch die Verwendung des Speicherschemas fuer Sparse-Matrizen aus Liebau, Rudolphi werden nur die Nichtnullelemente der Jacobi-Matrix gespeichert. Liegt insbesondere ein lineares Problem vor, so braucht diese Matrix nur einmal berechnet zu werden. Das BI-CGSTAB-Verfahren, also

  7. ANALYSIS AND VALIDATION OF GRID DEM GENERATION BASED ON GAUSSIAN MARKOV RANDOM FIELD

    Directory of Open Access Journals (Sweden)

    F. J. Aguilar

    2016-06-01

    Full Text Available Digital Elevation Models (DEMs are considered as one of the most relevant geospatial data to carry out land-cover and land-use classification. This work deals with the application of a mathematical framework based on a Gaussian Markov Random Field (GMRF to interpolate grid DEMs from scattered elevation data. The performance of the GMRF interpolation model was tested on a set of LiDAR data (0.87 points/m2 provided by the Spanish Government (PNOA Programme over a complex working area mainly covered by greenhouses in Almería, Spain. The original LiDAR data was decimated by randomly removing different fractions of the original points (from 10% to up to 99% of points removed. In every case, the remaining points (scattered observed points were used to obtain a 1 m grid spacing GMRF-interpolated Digital Surface Model (DSM whose accuracy was assessed by means of the set of previously extracted checkpoints. The GMRF accuracy results were compared with those provided by the widely known Triangulation with Linear Interpolation (TLI. Finally, the GMRF method was applied to a real-world case consisting of filling the LiDAR-derived DSM gaps after manually filtering out non-ground points to obtain a Digital Terrain Model (DTM. Regarding accuracy, both GMRF and TLI produced visually pleasing and similar results in terms of vertical accuracy. As an added bonus, the GMRF mathematical framework makes possible to both retrieve the estimated uncertainty for every interpolated elevation point (the DEM uncertainty and include break lines or terrain discontinuities between adjacent cells to produce higher quality DTMs.

  8. DEVELOPMENT AND EVALUATION OF SIMPLE MEASUREMENT SYSTEM USING THE OBLIQUE PHOTO AND DEM

    Directory of Open Access Journals (Sweden)

    H. Nonaka

    2016-06-01

    Full Text Available When a disaster occurs, we must grasp and evaluate its damage as soon as possible. Then we try to estimate them from some kind of photographs, such as surveillance camera imagery, satellite imagery, photographs taken from a helicopter and so on. Especially in initial stage, estimation of decent damage situation for a short time is more important than investigation of damage situation for a long time. One of the source of damage situation is the image taken by surveillance camera, satellite sensor and helicopter. If we can measure any targets in these imagery, we can estimate a length of a lava flow, a reach of a cinder and a sediment volume in volcanic eruption or landslide. Therefore in order to measure various information for a short time, we developed a simplified measurement system which uses these photographs. This system requires DEM in addition to photographs, but it is possible to use previously acquired DEM. To measure an object, we require only two steps. One is the determination of the position and the posture in which the photograph is shot. We determine these parameters using DEM. The other step is the measurement of an object in photograph. In this paper, we describe this system and show the experimental results to evaluate this system. In this experiment we measured the top of Mt. Usu by using two measurement method of this system. Then we can measure it about one hour and the difference between the measurement results and the airborne LiDAR data are less than 10 meter.

  9. Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach

    Directory of Open Access Journals (Sweden)

    Alireza Baghbanan

    2017-06-01

    Full Text Available Due to existence of uncertainties in input geometrical properties of fractures, there is not any unique solution for assessing the stability of slopes in jointed rock masses. Therefore, the necessity of applying probabilistic analysis in these cases is inevitable. In this study a probabilistic analysis procedure together with relevant algorithms are developed using Discrete Fracture Network-Distinct Element Method (DFN-DEM approach. In the right abutment of Karun 4 dam and downstream of the dam body, five joint sets and one major joint have been identified. According to the geometrical properties of fractures in Karun river valley, instability situations are probable in this abutment. In order to evaluate the stability of the rock slope, different combinations of joint set geometrical parameters are selected, and a series of numerical DEM simulations are performed on generated and validated DFN models in DFN-DEM approach to measure minimum required support patterns in dry and saturated conditions. Results indicate that the distribution of required bolt length is well fitted with a lognormal distribution in both circumstances. In dry conditions, the calculated mean value is 1125.3 m, and more than 80 percent of models need only 1614.99 m of bolts which is a bolt pattern with 2 m spacing and 12 m length. However, as for the slopes with saturated condition, the calculated mean value is 1821.8 m, and more than 80 percent of models need only 2653.49 m of bolts which is equivalent to a bolt pattern with 15 m length and 1.5 m spacing. Comparison between obtained results with numerical and empirical method show that investigation of a slope stability with different DFN realizations which conducted in different block patterns is more efficient than the empirical methods.

  10. Demência como fator de risco para fraturas graves em idosos

    Directory of Open Access Journals (Sweden)

    Carvalho Aline de Mesquita

    2002-01-01

    Full Text Available INTRODUÇÃO: As quedas entre pessoas idosas constituem importante problema de saúde pública devido à sua alta incidência, às complicações para a saúde e aos altos custos assistenciais. O estudo realizado visa a estimar a associação entre demência e ocorrência de quedas e fraturas entre idosos. MÉTODOS: Foi conduzido estudo caso-controle de 404 indivíduos com 60 ou mais anos de idade, da cidade do Rio de Janeiro, Brasil. Casos e controles foram pareados por idade, sexo e hospital. Os dados foram coletados por meio de entrevista estruturada com os idosos. Foram considerados portadores de quadro demencial idosos cuja pontuação no questionário BOAS fosse superior a dois. Foram obtidos odds ratios (OR ajustados por fatores potenciais de confusão, utilizando-se regressão logística condicional. RESULTADOS: As quedas distribuíram-se igualmente entre os períodos da manhã, tarde e noite, havendo uma redução em sua freqüência durante a madrugada. Acidentaram-se dentro de casa 78% dos idosos com demência, contra 55% daqueles sem essa doença. O OR não-ajustado para a associação entre demência e fratura grave foi de 2,0 (IC95%, 1,23-3,25. Após o ajuste por fatores de confusão, houve uma pequena redução dessa associação (OR=1,82, 1,03-3,23. CONCLUSÃO: Idosos com quadro demencial apresentam maior risco de caírem e ser hospitalizados por fratura do que idosos sem demência. Tal fato implica a necessidade de cuidados especiais com esses indivíduos, visando a minimizar o risco desses acidentes.

  11. DEM L241, A SUPERNOVA REMNANT CONTAINING A HIGH-MASS X-RAY BINARY

    International Nuclear Information System (INIS)

    Seward, F. D.; Charles, P. A.; Foster, D. L.; Dickel, J. R.; Romero, P. S.; Edwards, Z. I.; Perry, M.; Williams, R. M.

    2012-01-01

    A Chandra observation of the Large Magellanic Cloud supernova remnant DEM L241 reveals an interior unresolved source which is probably an accretion-powered binary. The optical counterpart is an O5III(f) star making this a high-mass X-ray binary with an orbital period likely to be of the order of tens of days. Emission from the remnant interior is thermal and spectral information is used to derive density and mass of the hot material. Elongation of the remnant is unusual and possible causes of this are discussed. The precursor star probably had mass >25 M ☉

  12. DEM L241, A SUPERNOVA REMNANT CONTAINING A HIGH-MASS X-RAY BINARY

    Energy Technology Data Exchange (ETDEWEB)

    Seward, F. D. [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Charles, P. A. [School of Physics and Astronomy, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Foster, D. L. [South African Astronomical Observatory, P.O. Box 9, Observatory 7935, Cape Town (South Africa); Dickel, J. R.; Romero, P. S. [Department of Physics and Astronomy, University of New Mexico, 1919 Lomas Boulevard NE, Albuquerque, NM 87131 (United States); Edwards, Z. I.; Perry, M.; Williams, R. M. [Department of Earth and Space Sciences, Columbus State University, Coca Cola Space Science Center, 701 Front Avenue, Columbus, GA 31901 (United States)

    2012-11-10

    A Chandra observation of the Large Magellanic Cloud supernova remnant DEM L241 reveals an interior unresolved source which is probably an accretion-powered binary. The optical counterpart is an O5III(f) star making this a high-mass X-ray binary with an orbital period likely to be of the order of tens of days. Emission from the remnant interior is thermal and spectral information is used to derive density and mass of the hot material. Elongation of the remnant is unusual and possible causes of this are discussed. The precursor star probably had mass >25 M {sub Sun}.

  13. Was kommt nach dem Handel? Umnutzung von Einzelhandelsflächen und deren Beitrag zur Stadtentwicklung

    OpenAIRE

    Sperle, Tilman

    2012-01-01

    In der Stadt europäischen Typs sind Stadt und Handel eng miteinander verwoben. Die Bedeutung des Handels geht weit über dessen originäre Versorgungsfunktion hinaus. Für die städtischen Zentren und Nebenzentren übernimmt er sowohl gestaltende als auch soziale Funktionen und trägt mit seiner belebenden Wirkung maßgeblich zum urbanen Leben bei. Mit dem tief greifenden Strukturwandel im Einzelhandel verändert sich diese Beziehung zwischen Stadt und Handel dramatisch, Trading-down-Prozesse geh...

  14. Rechargable Lithium-Air Batteries: Investigation of Redox Mediators Using DEMS

    DEFF Research Database (Denmark)

    Christensen, Mathias Kjærgård; Storm, Mie Møller; Norby, Poul

    2016-01-01

    material or electrolyte is being decomposed. This is also seen with Thermally reduced Graphene Oxide (TrGO). The graphene based cathode is interesting as it exhibits a high surface area which in turn increases capacity. Using the additive LiI, functioning as a redox mediator, the discharge curve remains...... is observed without the redox mediator [2]. This results in higher energy densities and ideally higher cyclability due to the lower over-potentials. Using DEMS we have investigated the gas evolved in the process to determine the electron to oxygen ratio using both cathode materials mentioned. As has been...

  15. O efeito de um programa psicomotor para idosos com demência

    OpenAIRE

    Henriques, Bebiana Maria Pais

    2013-01-01

    Trabalho de Projeto apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Fisioterapia, ramo de Fisioterapia da Senescência Resultados de vários estudos fornecem informações relevantes à literatura do envelhecimento, sugerindo que há uma relação positiva entre a intervenção motora e cognitiva em idosos com demência (p. ex. Ferrer et al., 2003). Segundo a Alzheimer Europe (2012) existem 7,3 milhões de europeus dementes (153.000 port...

  16. Dem Sog der Arbeit widerstehen. Leben im egalitären Modell

    Directory of Open Access Journals (Sweden)

    Aschermann Ellen

    2007-07-01

    Full Text Available Die Autorinnen untersuchen die Einschätzungen von deutschschweizer Ehepaaren und ihren heranwachsenden Kindern zum Leben in einem egalitären Familienmodell. Die Längsschnittstudie umfasst dabei einen Zeitraum von 10 Jahren. In halbstrukturierten Interviews werden die Veränderungen in der Organisation in Arbeits-, Haushalts- und Familienbereich erhoben und mittels qualitativer Analyse strukturiert. Der erste Band enthält die theoretischen Grundlagen und die Befunde zu den Veränderungen bei den Eltern. Im zweiten Band wird auf die Erfahrungen der Kinder eingegangen, die in diesen Familien aufwuchsen. Auch sie wurden mit halbstrukturierten Interviews befragt. Zusätzlich wird die Kinderperspektive mit einer stärker traditionell aufwachsenden Kontrollgruppe verglichen.

  17. The new special report of the Monopolies Commission on the energy markets; Das neue Sondergutachten der Monopolkommission zu den Energiemaerkten

    Energy Technology Data Exchange (ETDEWEB)

    Zenke, Ines; Heymann, Tigran; Poppe, Sebastian [Kanzlei BBH, Becker Buettner Held, Berlin (Germany)

    2015-12-15

    The Monopolies Commission has published once more a special report on the energy market, which is now 71. In this they examined regularly for many years as well the competition in the German electricity and gas markets work and how he is developping foreseeable. Especially the five-member Commission comments current changes of the regulatory framework and gives the legislature from competitive economic perspective suggestions for possible need for adaptation. In the current special report itself the Monopolies Commission therefore also daels with the current plans of the Federal Government for an electricity market law apart, outlined in the Green and White Papers of the Federal Government to the electricity market 2.0. This contribution begins with an overview of the investigation by the Monopolies Commission on the situation of competition in the German energy markets since the last special report (Point A). Proceeding from this point is the analysis of Monopolies Commission with the projects of the electricity market law ist taken up and assessed (point B). Closing the authors draw a conclusion (point C). [German] Die Monopolkommission hat wieder einmal ein Sondergutachten zum Energiemarkt veroeffentlicht, das mittlerweile 71. In diesen begutachtet sie seit vielen Jahren regelmaessig, wie gut der Wettbewerb auf den deutschen Strom- und Gasmaerkten funktioniert und auch, wie er sich absehbar entwickelt. Insbesondere kommentiert die fuenfkoepfige Kommission aktuelle Aenderungen des ordnungspolitischen Rahmens und gibt dem Gesetzgeber aus wettbewerbsoekonomischer Perspektive Anregungen fuer etwaigen Anpassungsbedarf. Im aktuellen Sondergutachten setzt sich die Monopolkommission daher auch mit den aktuellen Plaenen der Bundesregierung fuer ein Strommarktgesetz auseinander, angelegt im Gruen- und Weissbuch der Bundesregierung zum Strommarkt 2.0. Dieser Beitrag beginnt mit einem Ueberblick ueber die Untersuchungen der Monopolkommission zur Lage des Wettbewerbs auf den

  18. Intermediale Bezugnahme und mediale Materialität Eine Replik auf Beatrice Nickels Aufsatz »Poetry gets into the city. Beobachtungen zu intermedialen Dichtungen in der Stadt«

    Directory of Open Access Journals (Sweden)

    Johanne Mohs

    2012-05-01

    Full Text Available In ihrer Replik auf den Beitrag von Beatrice Nickel weitet Johanne Mohs die Perspektive auf ›Gedichtobjekte‹ im städtischen Raum nach 1945 aus. Eingangs differenziert sie den Begriff der Intermedialität, um daraufhin die von Beatrice Nickel angeführten Beispiele analytisch zu spezifizieren und interpretatorisch zu vertiefen. Letztlich folgt ihre Lesart den Avantgardekonzepten des frühen 20. Jahrhunderts, um das von den Künstlern problematisierte Wechselverhältnis von ›Kunst‹ und ›Leben‹ zu beleuchten.

  19. Intermediale Bezugnahme und mediale Materialität. Eine Replik auf Beatrice Nickels Aufsatz »Poetry gets into the city: Beobachtungen zu intermedialen Dichtungen in der Stadt«

    Directory of Open Access Journals (Sweden)

    Johanne Mohs

    2012-05-01

    Full Text Available In ihrer Replik auf den Beitrag von Beatrice Nickel weitet Johanne Mohs die Perspektive auf ›Gedichtobjekte‹ im städtischen Raum nach 1945 aus. Eingangs differenziert sie den Begriff der Intermedialität, um daraufhin die von Beatrice Nickel angeführten Beispiele analytisch zu spezifizieren und interpretatorisch zu vertiefen. Letztlich folgt ihre Lesart den Avantgardekonzepten des frühen 20. Jahrhunderts, um das von den Künstlern problematisierte Wechselverhältnis von ›Kunst‹ und ›Leben‹ zu beleuchten.

  1. Electric heat pump for motor vehicles with R744 (CO{sub 2}) as refrigerant; Elektrisch betriebene Waermepumpe fuer Fahrzeuge mit dem Kaeltemittel R744 (CO{sub 2})

    Energy Technology Data Exchange (ETDEWEB)

    Huenemoerder, W.; Kakehashi, N. [DENSO Automotive Deutschland GmbH, Eching (Germany)

    2003-07-01

    R744 (carbon dioxide) is suited for low ambient temperatures. A motor car air conditioner on this basis was developed for engines with low heat emissions. The passenger compartment is heated and cooled by a single system comprising a semihermetic electric compressor and three air-filled heat transfer units, i.e. an evaporator and a gas cooler for heating inside the car and a heat exchanger on the outside which can serve as evaporator or gas cooler as desired. The system can be operated in four modes: Heating without dehumidification, heating and dehumidification, cooling, thawing of the external heat exchanger. In contrast to conventional systems, the heating and cooling mode are not independent of each other, so a special control concept was developed which enables automatic operation of the four above modes of operation. The system is used in the Toyota FCHV fuel cell car. (orig.) [German] Das Kaeltemittel CO{sub 2} (R744) kann auch bei niederen Umgebungstemperaturen fuer Waermepumpenanwendungen eingesetzt werden. Eine CO{sub 2}-Klimaanlage mit Waermepumpe wurde fuer die Klimatisierung (Heizen, Kuehlen und Entfeuchten) des Fahrzeuginnenraumes entwickelt. Diese Anlage ist fuer Elektro- und Breenstoffzellenfahrzeuge geeignet, bei denen keine Motorabwaerme zu Heizzwecken zur Verfuegung steht. Heizen und Kuehlen des Innenraumes erfolgt durch ein einziges System unter Verwendung derselben Komponenten. Die Anlage besteht aus einem halbhermetischen elektrischen Verdichter und drei luftbeaufschlagten Waermeuebertragern - ein Verdampfer und ein Gaskuehler (zum Heizen) im Innenraum und ein Waermeuebertrager aussen, der - je nach Betriebsart - als Verdampfer oder Gaskuehler betrieben wird. Die Anlage kann in vier Betriebsarten betrieben werden: Heizen ohne Entfeuchtung, Heizen mit Entfeuchtung, Kuehlen, Abtauen des aeusseren Waermeuebertragers. In konventionellen Systemen koennen Heiz- und Kuehlsystem unabhaengig voneinander geregelt werden. Bei dem hier vorgestellten

  2. Tutorium Quantenfeldtheorie was Sie schon immer über QFT wissen wollten, aber bisher nicht zu fragen wagten

    CERN Document Server

    Edelhäuser, Lisa

    2016-01-01

    Dieses Buch richtet sich an alle, die sich schon immer gefragt haben, wie die kanonische Quantisierung, die LSZ-Reduktionsformel, Pfadintegrale, Feynman-Graphen und die Renormierung miteinander zusammenhängen. Als locker geschriebene Begleitlektüre zu Vorlesungen über Quantenfeldtheorie oder zum Selbststudium geeignet, gibt sich das Buch gesprächig und liefert Rechentricks und Erklärungen, die für Einsteiger sehr hilfreich sind. Im ersten Teil werden anhand von Skalarfeldern grundlegende Konzepte von der klassischen Feldtheorie bis zur Renormierung eingeführt. Der zweite Teil verallgemeinert diese für Felder mit Spin und legt mit der Einführung des Eichprinzips die Grundlagen für den dritten Teil. Hier werden „Anwendungen auf die reale Welt“ behandelt: Die Quantenelektrodynamik und ihre Renormierung, sowie das Standardmodell der Teilchenphysik und der Higgs-Mechanismus. Durch ausführlich vorgerechnete und in den Text eingebundene Aufgaben eignet sich das Tutorium sowohl zum schnellen Nachschla...

  3. Vulnerabilität. Erläuterungen zu einem Schlüsselbegriff im Denken Judith Butlers

    Directory of Open Access Journals (Sweden)

    Pistrol Florian

    2016-07-01

    Full Text Available Im neueren Denken Judith Butlers nimmt der Begriff der Vulnerabilität eine Schlüsselrolle ein. Kaum eines der vielen Themen, denen sich die US-amerikanische Autorin seit der Jahrtausendwende widmet, kann ohne Kenntnis ihrer Überlegungen zu diesem Terminus angemessen verstanden werden. Der Versuch einer Rekonstruktion ihrer Konzeption von Vulnerabilität steht allerdings vor der Schwierigkeit, dass Butlers Gedanken hierzu über zahlreiche Texte hinweg verstreut sind, wobei bisweilen unterschiedliche Aspekte betont und verschiedene Schwerpunktsetzungen vorgenommen werden. Im vorliegenden Beitrag werden Butlers vulnerabilitätstheoretische Ausführungen in gebündelter Weise dargestellt und interpretiert. Dabei wird (1 die Bedeutsamkeit von Butlers Überlegungen zur Vulnerabilität für ihre Vorstellung von Körperlichkeit aufgewiesen, (2 der Zusammenhang von Vulnerabilität und Anerkennung erläutert und (3 gezeigt, welche ethischen Erwägungen Butler ausgehend von ihrer Anerkennungskonzeption und ihrem Denken der Vulnerabilität anstellt und inwiefern Vulnerabilität und politische Handlungsfähigkeit einander nicht ausschließen. Abschließend wird (4 Butlers Vulnerabilitätsverständnis mit einigen kritischen Rückfragen konfrontiert.

  4. Gerechtigkeit, ethische Subjektivität und Alterität. Zu den normativen Implikationen der Philosophie von Emmanuel Levinas

    Directory of Open Access Journals (Sweden)

    Seitz Sergej

    2016-07-01

    Full Text Available Obwohl seit einiger Zeit ein verstärktes Forschungsinteresse an Emmanuel Levinas’ Denken des Politischen, verbunden mit einer genaueren Inblicknahme der zentralen Begriffe des Dritten und der Gerechtigkeit aufgekommen ist, blieb bislang unklar, inwiefern aus Levinas’ intrinsisch ‚ethischem‘ Denken in konkreterer Weise normative Konsequenzen zu ziehen sind. Diesem Desiderat versucht der vorliegende Beitrag nachzukommen. Das Levinas’sche Gerechtigkeitsdenken wird dabei so eingeführt, dass es zugleich als alternativer Entwurf und als produktive kritische Provokation für gegenwärtige Gerechtigkeitstheorien lesbar wird. Ausgehend von einer Rekonstruktion des alteritären Verständnisses ethischer Subjektivität, wie es Levinas insbesondere in Jenseits des Seins erarbeitet, wird ausgelotet, wie tragfähig Levinas’ ethische Konzeption plural alteritär durchfurchter Subjektivität für normative Gerechtigkeitsfragen ist. Aus einer Reflexion auf den Begriff des ‚Dritten‘ werden einige konkrete Konsequenzen für das Denken gerechter Institutionen gezogen.

  5. Der Zusammenhang von Partnermarktopportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen : Eine Analyse mit den Daten des Partnermarktsurvey

    OpenAIRE

    Häring, Armando

    2014-01-01

    "Der Beitrag analysiert den Zusammenhang zwischen Partnermarktoportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen. Unter Verwendung des theoretischen Konzepts der Theorie der Interaktionsgelegenheiten sowie von Annahmen der Austauschtheorie und der Familienökonomie, werden mögliche Zusammenhänge zwischen gemeinsamen Freundeskreisen mit dem Partner, Partnermarktgelegenheiten aus dem Freundeskreis (sex ratio) und der Stabilität von Paarbeziehungen diskutiert. Der Beitrag ...

  6. Investigações epidemiológicas sobre demência nos países em desenvolvimento

    Directory of Open Access Journals (Sweden)

    M Scazufca

    2002-12-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.

  7. Investigações epidemiológicas sobre demência nos países em desenvolvimento

    Directory of Open Access Journals (Sweden)

    Scazufca M

    2002-01-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.

  8. Comparison of elevation derived from insar data with dem from topography map in Son Dong, Bac Giang, Viet Nam

    Science.gov (United States)

    Nguyen, Duy

    2012-07-01

    Digital Elevation Models (DEMs) are used in many applications in the context of earth sciences such as in topographic mapping, environmental modeling, rainfall-runoff studies, landslide hazard zonation, seismic source modeling, etc. During the last years multitude of scientific applications of Synthetic Aperture Radar Interferometry (InSAR) techniques have evolved. It has been shown that InSAR is an established technique of generating high quality DEMs from space borne and airborne data, and that it has advantages over other methods for the generation of large area DEM. However, the processing of InSAR data is still a challenging task. This paper describes InSAR operational steps and processing chain for DEM generation from Single Look Complex (SLC) SAR data and compare a satellite SAR estimate of surface elevation with a digital elevation model (DEM) from Topography map. The operational steps are performed in three major stages: Data Search, Data Processing, and product Validation. The Data processing stage is further divided into five steps of Data Pre-Processing, Co-registration, Interferogram generation, Phase unwrapping, and Geocoding. The Data processing steps have been tested with ERS 1/2 data using Delft Object-oriented Interferometric (DORIS) InSAR processing software. Results of the outcome of the application of the described processing steps to real data set are presented.

  9. Rezension zu: Mary Pepchinski: Feminist Space. Exhibitions and Discourses between Philadelphia and Berlin 1865–1912. Weimar: VDG Verlag und Datenbank für Geisteswissenschaften 2007.

    Directory of Open Access Journals (Sweden)

    Monika Kaiser

    2009-10-01

    Full Text Available Mary Pepchinski widmet ihre Untersuchung temporären Ausstellungen, die im Zeitraum von 1865 bis 1912 im deutschsprachigen Raum und in den USA entstanden sind und die zum Ziel hatten, in der bürgerlichen Öffentlichkeit Räume für feministische Anliegen und Diskussionen zu schaffen. In diesen um 1900 neu entstehenden Räumen der weiblichen Kultur spiegeln sich die feministischen Diskurse der Epoche und fließen in die von den Akteurinnen des gehobenen Bürgertums geschaffenen, charakteristischen Raumschöpfungen ein. Die Autorin stellt bislang unbekanntes Quellenmaterial vor und eröffnet durch ihren interdisziplinären Blick den Zugang zu einem vernachlässigten, da bislang unbekannten Teil der Kulturgeschichte der Moderne.

  10. Wybrane Aspekty Zużywania Się Połączeń Wpustowych I Wielowypustowych W Procesie Eksploatacji

    Directory of Open Access Journals (Sweden)

    Gębura Andrzej

    2014-12-01

    Full Text Available W artykule przedstawiono wybrane wady połączeń wielowypustowych: mimośrodowości, przekoszenia, zwiększonych luzów. Przedstawiono znaczenie tych wad dla poprawności funkcjonowania całego zespołu napędowego. Zaprezentowano swoisty katalog tych wad w formie: wizualnego zużycia, pomiarów mechanicznych płaszczyzn przyporu, opisu matematycznego przebiegów dynamiki ruchu takiego połączenia, zobrazowań dla metod FAM-C i FDM-A. Zaznaczono skutki długotrwałej eksploatacji połączeń wielowypustowych o nadmiernym zużyciu dla bezpieczeństwa latania

  11. DEM study of granular flow around blocks attached to inclined walls

    Directory of Open Access Journals (Sweden)

    Samsu Joel

    2017-01-01

    Full Text Available Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i flow analysis in terms of flow patterns and particle velocities, (ii force distributions within the model geometry, and (iii wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  12. Historic Low Wall Detection via Topographic Parameter Images Derived from Fine-Resolution DEM

    Directory of Open Access Journals (Sweden)

    Hone-Jay Chu

    2017-11-01

    Full Text Available Coral walls protect vegetation gardens from strong winds that sweep across Xiji Island, Taiwan Strait for half the year. Topographic parameters based on light detection and ranging (LiDAR-based high-resolution digital elevation model (DEM provide obvious correspondence with the expected form of landscape features. The information on slope, curvature, and openness can help identify the location of landscape features. This study applied the automatic landscape line detection to extract historic vegetable garden wall lines from a LiDAR-derived DEM. The three rapid processes used in this study included the derivation of topographic parameters, line extraction, and aggregation. The rules were extracted from a decision tree to check the line detection from multiple topographic parameters. Results show that wall line detection with multiple topographic parameter images is an alternative means of obtaining essential historic wall feature information. Multiple topographic parameters are highly related to low wall feature identification. Furthermore, the accuracy of wall feature detection is 74% compared with manual interpretation. Thus, this study provides rapid wall detection systems with multiple topographic parameters for further historic landscape management.

  13. DEM study of granular flow around blocks attached to inclined walls

    Science.gov (United States)

    Samsu, Joel; Zhou, Zongyan; Pinson, David; Chew, Sheng

    2017-06-01

    Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM) is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i) flow analysis in terms of flow patterns and particle velocities, (ii) force distributions within the model geometry, and (iii) wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  14. CFD-DEM Simulation of Minimum Fluidisation Velocity in Two Phase Medium

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-09-01

    Full Text Available In this work, CFD-DEM (computational fluid dynamics - discrete element method has been used to model the 2 phase flow composed of solid particle and gas in the fluidised bed. This technique uses the Eulerian and the Langrangian methods to solve fluid and particles respectively. Each particle is treated as a discrete entity whose motion is governed by Newton's laws of motion. The particle-particle and particle-wall interaction is modelled using the classical contact mechanics. The particles motion is coupled with the volume averaged equations of the fluid dynamics using drag law. In fluidised bed, particles start experiencing drag once the fluid is passing through. The solid particles response to it once drag experienced is just equal to the weight of the particles. At this moment pressure drop across the bed is just equal to the weight of particles divide by the cross-section area. This is the first regime of fluidization, also referred as ‘the regime of minimum fluidization’. In this study, phenomenon of minimum fluidization is studied using CFD-DEM simulation with 4 different sizes of particles 0.15 mm, 0.3 mm, 0.6 mm, and 1.2 mm diameters. The results are presented in the form of pressure drop across the bed with the fluid superficial velocity. The achieved results are found in good agreement with the experimental and theoretical data available in literature.

  15. CFD-DEM Simulation of Propagation of Sound Waves in Fluid Particles Fluidised Medium

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-09-01

    Full Text Available In this work, speed of sound in 2 phase mixture has been explored using CFD-DEM (Computational Fluid Dynamcis - Discrete Element Modelling. In this method volume averaged Navier Stokes, continuity and energy equations are solved for fluid. Particles are simulated as individual entities; their behaviour is captured by Newton's laws of motion and classical contact mechanics. Particle-fluid interaction is captured using drag laws given in literature. The speed of sound in a medium depends on physical properties. It has been found experimentally that speed of sound drops significantly in 2 phase mixture of fluidised particles because of its increased density relative to gas while maintaining its compressibility. Due to the high rate of heat transfer within 2 phase medium as given in Roy et al. (1990, it has been assumed that the fluidised gas-particle medium is isothermal. The similar phenomenon has been tried to be captured using CFD-DEM numerical simulation. The disturbance is introduced and fundamental frequency in the medium is noted to measure the speed of sound for e.g. organ pipe. It has been found that speed of sound is in agreement with the relationship given in Roy et al. (1990. Their assumption that the system is isothermal also appears to be valid.

  16. Toward the modeling of combustion reactions through discrete element method (DEM) simulations

    Science.gov (United States)

    Reis, Martina Costa; Alobaid, Falah; Wang, Yongqi

    2018-03-01

    In this work, the process of combustion of coal particles under turbulent regime in a high-temperature reaction chamber is modeled through 3D discrete element method (DEM) simulations. By assuming the occurrence of interfacial transport phenomena between the gas and solid phases, one investigates the influence of the physicochemical properties of particles on the rates of heterogeneous chemical reactions, as well as the influence of eddies present in the gas phase on the mass transport of reactants toward the coal particles surface. Moreover, by considering a simplistic chemical mechanism for the combustion process, thermochemical and kinetic parameters obtained from the simulations are employed to discuss some phenomenological aspects of the combustion process. In particular, the observed changes in the mass and volume of coal particles during the gasification and combustion steps are discussed by emphasizing the changes in the chemical structure of the coal. In addition to illustrate how DEM simulations can be used in the modeling of consecutive and parallel chemical reactions, this work also shows how heterogeneous and homogeneous chemical reactions become a source of mass and energy for the gas phase.

  17. Magnetisches Tracking für die Navigation mit dem da Vinci® Surgical System

    Science.gov (United States)

    Nickel, Felix; Wegner, Ingmar; Kenngott, Hannes; Neuhaus, Jochen; Müller-Stich, Beat P.; Meinzer, Hans-Peter; Gutt, Carsten N.

    In dieser Studie wurde untersucht ob in einem typischen OP-Aufbau mit dem da Vinci® Telemanipulator elektromagnetisches Tracking für die Realisation eines Navigationssystems eingesetzt werden kann. Hierfür wurde in einem realen OP-Aufbau untersucht, wie stark metallische und ferromagnetisch wirksame Objekte wie Operationstisch und Telemanipulator das elektromagnetische Feld des Trackingsystems beeinflussen. Die Ergebnisse zeigen, dass der Telemanipulator nur unwesentlich die Störung des Magnetfeldes durch den OP-Tisch verstärkt. Insbesondere die Bewegung der Instrumente im Trackingvolumen verursachte keine zusätzliche relevante Störung des Magnetfeldes. Bei Begrenzung des Trackingvolumens auf eine Länge von 190 mm, Höhe von 200mm und Breite von 400 mm war der maximale Fehler in diesem Bereich an allen Messpunkten kleiner 10 mm. Der Einsatz von elektromagnetischem Tracking für die Navigation mit dem da Vinci® Surgical System ist somit in einem begrenzten Arbeitsvolumen mit hinreichender Genauigkeit möglich.

  18. 1963 Vajont rock slide: a comparison between 3D DEM and 3D FEM

    Science.gov (United States)

    Crosta, Giovanni; Utili, Stefano; Castellanza, Riccardo; Agliardi, Federico; Bistacchi, Andrea; Weng Boon, Chia

    2013-04-01

    Data on the exact location of the failure surface of the landslide have been used as the starting point for the modelling of the landslide. 3 dimensional numerical analyses were run employing both the discrete element method (DEM) and a Finite Element Method (FEM) code. In this work the focus is on the prediction of the movement of the landlside during its initial phase of detachment from Mount Toc. The results obtained by the two methods are compared and conjectures on the observed discrepancies of the predictions between the two methods are formulated. In the DEM simulations the internal interaction of the sliding blocks and the expansion of the debris is obtained as a result of the kinematic interaction among the rock blocks resulting from the jointing of the rock mass involved in the slide. In the FEM analyses, the c-phi reduction technique was employed along the predefine failure surface until the onset of the landslide occurred. In particular, two major blocks of the landslide were identified and the stress, strain and displacement fields at the interface between the two blocks were analysed in detail.

  19. DEM modeling of failure mechanisms induced by excavations on the Moon

    Science.gov (United States)

    jiang, mingjing; shen, zhifu; Utili, Stefano

    2013-04-01

    2D Discrete Element Method (DEM) analyses were performed for excavations supported by retaining walls in lunar environment. The lunar terrain is made of a layer of sand (regolith) which differs from terrestrial sands for two main features: the presence of adhesive attractive forces due to van der Waals interactions and grains being very irregular in shape leading to high interlocking. A simplified contact model based on linear elasticity and perfect plasticity was employed. The contact model includes a moment - relative rotation law to account for high interlocking among grains and a normal adhesion law to account for the van der Waals interactions. Analyses of the excavations were run under both lunar and terrestrial environments. Under lunar environment, gravity is approximately one sixth than the value on Earth and adhesion forces between grains of lunar regolith due to van der Waals interactions are not negligible. From the DEM simulations it emerged that van der Waals interactions may significantly increase the bending moment and deflection of the retaining wall, and the ground displacements. Hence this study indicates that an unsafe estimate of the wall response to an excavation on the Moon would be obtained from physical experiments performed in a terrestrial environment, i.e., considering the effect of gravity but neglecting the van der Waals interactions.

  20. An Automated Processing Algorithm for Flat Areas Resulting from DEM Filling and Interpolation

    Directory of Open Access Journals (Sweden)

    Xingwei Liu

    2017-11-01

    Full Text Available Correction of digital elevation models (DEMs for flat areas is a critical process for hydrological analyses and modeling, such as the determination of flow directions and accumulations, and the delineation of drainage networks and sub-basins. In this study, a new algorithm is proposed for flat correction/removal. It uses the puddle delineation (PD program to identify depressions (including their centers and overflow/spilling thresholds, compute topographic characteristics, and further fill the depressions. Three different levels of elevation increments are used for flat correction. The first and second level of increments create flows toward the thresholds and centers of the filled depressions or flats, while the third level of small random increments is introduced to cope with multiple threshold conditions. A set of artificial surfaces and two real-world landscapes were selected to test the new algorithm. The results showed that the proposed method was not limited by the shapes, the number of thresholds, and the surrounding topographic conditions of flat areas. Compared with the traditional methods, the new algorithm simplified the flat correction procedure and reduced the final elevation increments by 5.71–33.33%. This can be used to effectively remove/correct topographic flats and create flat-free DEMs.

  1. Application of the PROMETHEE technique to determine depression outlet location and flow direction in DEM

    Science.gov (United States)

    Chou, Tien-Yin; Lin, Wen-Tzu; Lin, Chao-Yuan; Chou, Wen-Chieh; Huang, Pi-Hui

    2004-02-01

    With the fast growing progress of computer technologies, spatial information on watersheds such as flow direction, watershed boundaries and the drainage network can be automatically calculated or extracted from a digital elevation model (DEM). The stubborn problem that depressions exist in DEMs has been frequently encountered while extracting the spatial information of terrain. Several filling-up methods have been proposed for solving depressions. However, their suitability for large-scale flat areas is inadequate. This study proposes a depression watershed method coupled with the Preference Ranking Organization METHod for Enrichment Evaluations (PROMETHEEs) theory to determine the optimal outlet and calculate the flow direction in depressions. Three processing procedures are used to derive the depressionless flow direction: (1) calculating the incipient flow direction; (2) establishing the depression watershed by tracing the upstream drainage area and determining the depression outlet using PROMETHEE theory; (3) calculating the depressionless flow direction. The developed method was used to delineate the Shihmen Reservoir watershed located in Northern Taiwan. The results show that the depression watershed method can effectively solve the shortcomings such as depression outlet differentiating and looped flow direction between depressions. The suitability of the proposed approach was verified.

  2. Landslide Detection in the Carlyon Beach, WA Peninsula: Analysis Of High Resolution DEMs

    Science.gov (United States)

    Fayne, J.; Tran, C.; Mora, O. E.

    2017-12-01

    Landslides are geological events caused by slope instability and degradation, leading to the sliding of large masses of rock and soil down a mountain or hillside. These events are influenced by topography, geology, weather and human activity, and can cause extensive damage to the environment and infrastructure, such as the destruction of transportation networks, homes, and businesses. It is therefore imperative to detect early-warning signs of landslide hazards as a means of mitigation and disaster prevention. Traditional landslide surveillance consists of field mapping, but the process is expensive and time consuming. This study uses Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and k-means clustering and Gaussian Mixture Model (GMM) to analyze surface roughness and extract spatial features and patterns of landslides and landslide-prone areas. The methodology based on several feature extractors employs an unsupervised classifier on the Carlyon Beach Peninsula in the state of Washington to attempt to identify slide potential terrain. When compared with the independently compiled landslide inventory map, the proposed algorithm correctly classifies up to 87% of the terrain. These results suggest that the proposed methods and LiDAR-derived DEMs can provide important surface information and be used as efficient tools for digital terrain analysis to create accurate landslide maps.

  3. Experimental study and DEM simulation of granular flow through a new sphere discharge valve

    International Nuclear Information System (INIS)

    Zhang He; Li Tianjin; Huang Zhiyong; Gao Zhi; Qi Weiwei; Bo Hanliang

    2015-01-01

    Experiments and DEM simulation have been conducted to investigate the granular flow through a new type of sphere discharge valve. The new sphere discharge valve was based on the principle of angle of repose. The glass sphere was used in the granular discharge experiments. Experimental results showed that the relation between the averaging sphere discharge mass flow rate and the stroke of the sphere discharge valve were consisted of three zones, i.e. the idle stroke zone, linearly zone and orifice restriction zone. The Beverloo's law was suitable for the granular flow through multi-orifices in the orifice restriction zone. The variation of averaging sphere discharge mass flow rate with the stroke of the sphere discharge valve was described by Beverloo's law with the modification based on the stroke of the sphere discharge valve. DEM simulation results showed that the drained angle of repose during granular flow in the sphere storage vessel remained 23 degrees with different stroke of the sphere discharge valve. (authors)

  4. Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

    Science.gov (United States)

    Prokešová, Roberta; Kardoš, Miroslav; Tábořík, Petr; Medveďová, Alžbeta; Stacke, Václav; Chudý, František

    2014-11-01

    Large earthflow-type landslides are destructive mass movement phenomena with highly unpredictable behaviour. Knowledge of earthflow kinematics is essential for understanding the mechanisms that control its movements. The present paper characterises the kinematic behaviour of a large earthflow near the village of Ľubietová in Central Slovakia over a period of 35 years following its most recent reactivation in 1977. For this purpose, multi-temporal spatial data acquired by point-based in-situ monitoring and optical remote sensing methods have been used. Quantitative data analyses including strain modelling and DEM differencing techniques have enabled us to: (i) calculate the annual landslide movement rates; (ii) detect the trend of surface displacements; (iii) characterise spatial variability of movement rates; (iv) measure changes in the surface topography on a decadal scale; and (v) define areas with distinct kinematic behaviour. The results also integrate the qualitative characteristics of surface topography, in particular the distribution of surface structures as defined by a high-resolution DEM, and the landslide subsurface structure, as revealed by 2D resistivity imaging. Then, the ground surface kinematics of the landslide is evaluated with respect to the specific conditions encountered in the study area including slope morphology, landslide subsurface structure, and local geological and hydrometeorological conditions. Finally, the broader implications of the presented research are discussed with particular focus on the role that strain-related structures play in landslide kinematic behaviour.

  5. Aerial photography flight quality assessment with GPS/INS and DEM data

    Science.gov (United States)

    Zhao, Haitao; Zhang, Bing; Shang, Jiali; Liu, Jiangui; Li, Dong; Chen, Yanyan; Zuo, Zhengli; Chen, Zhengchao

    2018-01-01

    The flight altitude, ground coverage, photo overlap, and other acquisition specifications of an aerial photography flight mission directly affect the quality and accuracy of the subsequent mapping tasks. To ensure smooth post-flight data processing and fulfill the pre-defined mapping accuracy, flight quality assessments should be carried out in time. This paper presents a novel and rigorous approach for flight quality evaluation of frame cameras with GPS/INS data and DEM, using geometric calculation rather than image analysis as in the conventional methods. This new approach is based mainly on the collinearity equations, in which the accuracy of a set of flight quality indicators is derived through a rigorous error propagation model and validated with scenario data. Theoretical analysis and practical flight test of an aerial photography mission using an UltraCamXp camera showed that the calculated photo overlap is accurate enough for flight quality assessment of 5 cm ground sample distance image, using the SRTMGL3 DEM and the POSAV510 GPS/INS data. An even better overlap accuracy could be achieved for coarser-resolution aerial photography. With this new approach, the flight quality evaluation can be conducted on site right after landing, providing accurate and timely information for decision making.

  6. Inundation Analysis of Reservoir Flood Based on Computer Aided Design (CAD and Digital Elevation Model (DEM

    Directory of Open Access Journals (Sweden)

    Jiqing Li

    2018-04-01

    Full Text Available GIS (Geographic Information System can be used to combine multiple hydrologic data and geographic data for FIA (Flood Impact Assessment. For a developing country like China, a lot of geographic data is in the CAD (Computer Aided Design format. The commonly used method for converting CAD into DEM may result in data loss. This paper introduces a solution for the conversion between CAD data and DEM data. The method has been applied to the FIA based on the topographic map of CAD in Hanjiang River. When compared with the other method, the new method solves the data loss problem. Besides, the paper use GIS to simulate the inundation range, area, and the depth distribution of flood backwater. Based on the analysis, the author concludes: (1 the differences of the inundation areas between the flood of HQ100 and the flood of HQ50 are small. (2 The inundation depth shows a decreasing trend along the upstream of the river. (3 The inundation area less than 4 m in flood of HQ50 is larger than that in flood of HQ100, the result is opposite when the inundation depth is greater than 4 m. (4 The flood loss is 392.32 million RMB for flood of HQ50 and 610.02 million RMB for flood of HQ100. The method can be applied to FIA.

  7. Parallel Resolved Open Source CFD-DEM: Method, Validation and Application

    Directory of Open Access Journals (Sweden)

    A. Hager

    2014-03-01

    Full Text Available In the following paper the authors present a fully parallelized Open Source method for calculating the interaction of immersed bodies and surrounding fluid. A combination of computational fluid dynamics (CFD and a discrete element method (DEM accounts for the physics of both the fluid and the particles. The objects considered are relatively big compared to the cells of the fluid mesh, i.e. they cover several cells each. Thus this fictitious domain method (FDM is called resolved. The implementation is realized within the Open Source framework CFDEMcOupling (www.cfdem.com, which provides an interface between OpenFOAM® based CFD-solvers and the DEM software LIGGGHTS (www.liggghts.com. While both LIGGGHTS and OpenFOAM® were already parallelized, only a recent improvement of the algorithm permits the fully parallel computation of resolved problems. Alongside with a detailed description of the method, its implementation and recent improvements, a number of application and validation examples is presented in the scope of this paper.

  8. CFD-DEM simulation of a conceptual gas-cooled fluidized bed nuclear reactor

    International Nuclear Information System (INIS)

    Almeida, Lucilla C.; Su, Jian

    2015-01-01

    Several conceptual designs of the fluidized-bed nuclear reactor have been proposed due to its many advantages over conventional nuclear reactors such as PWRs and BWRs. Amongst their characteristics, the enhanced heat transfer and mixing enables a more uniform temperature distribution, reducing the risk of hot-spot and excessive fuel temperature, in addition to resulting in a higher burnup of the fuel. Furthermore, the relationship between the bed height and reactor neutronics turns the coolant flow rate control into a power production mechanism. Moreover, the possibility of removing the fuel by gravity from the movable core in case of a loss-of-cooling accident increases its safety. High-accuracy modeling of particles and coolant flow in fluidized bed reactors is needed to evaluate reliably the thermal-hydraulic efficiency and safety margin. The two-way coupling between solid and fluid can account for high-fidelity solid-solid interaction and reasonable accuracy in fluid calculation and fluid-solid interaction. In the CFD-DEM model, the particles are modeled as a discrete phase, following the DEM approach, whereas the fluid flow is treated as a continuous phase, described by the averaged Navier-Stokes equations on a computational cell scale. In this work, the coupling methodology between Fluent and Rocky is described. The numerical approach was applied to the simulation of a bubbling fluidized bed and the results were compared to experimental data and showed good agreement. (author)

  9. Constructing Palaeo-DEMs in landscape evolution: example of the Geren catchment, Turkey

    Science.gov (United States)

    van Gorp, Wouter; Schoorl, Jeroen M.; Veldkamp, Tom; Maddy, Darrel; Demir, Tuncer; Aytac, Serdar

    2017-04-01

    How to reconstruct the past landscape and how does this influence your modelling results? This is an important paradigma in the soilscape and landscape evolution modelling community. Here an example of Turkey will be presented where a 300 ka LEM simulation requested to the thoroughly think about the initial landscape as an important input. What information can be used to know the morphology of a landscape 300 ka ago? The Geren catchment, a tributary of the upstream Gediz river near Kula, Turkey, has been influenced by base level changes during the Late Pleistocene and Holocene. Different lavaflows have blocked the Gediz and Geren river several times over in the timespan of the last 300 ka -200 Ka and in the recent Holocene. The heavily dissected Geren catchment shows a landscape evolution which is more complex than just a reaction on these base level changes. The steps and inputs of the palaeo DEM reconstruction will be presented and the modelling results will be presented. Keywords: Digital Elevation Model, Palaeo DEMs, Numerical modelling

  10. Comparison Between Topographic Expression of RADARSAT and DEM in Simpang Pulai to Pos Selim, Malaysia

    Directory of Open Access Journals (Sweden)

    M.F.Ramli

    2010-01-01

    Full Text Available Radar and digital elevation model had been utilised in many structural studies. The main objective of this study is to compare the RADARSAT and digital elevation model for lineament interpretation which probably represent the main joints or faults along the Simpang Pulai to Pos Selim highway, Malaysia. These joints and faults may influence the instability along the highway. Manual comparison in terms of topographical aspect was undertaken between RADARSAT with 25 m spatial resolution and digital elevation model derived from 20 m contour interval of the topographical map. The previously interpreted lineaments of more than 2 km in the study area was draped over the RADARSAT and digital elevation model to compared whether the lineament concurred with the topographical representation. The interpreted lineaments were derived from Landsat TM of 1990 and 2002, where the DEM had been utilised in the negative lineament determination. It is concluded that the application RADARSAT is not very useful in terms of topographical expression in the structural geological interpretation for the study area compared to DEM derived from contour data. Further work is suggested before any conclusion can be confidently derived.

  11. Qualitative Forschung auf der Basis von Eigenproduktionen mit Medien. Erfahrungswerte aus dem EU-Forschungsprojekt CHICAM – Children In Communication About Migration

    Directory of Open Access Journals (Sweden)

    Horst Niesyto

    2017-09-01

    Full Text Available Visuelle Methoden haben in verschiedenen Bereichen qualitativer Forschung eine wichtige Bedeutung. Zu nennen sind vor allem die visuelle Soziologie und die visuelle Anthropologie. Fotografie und Video werden bei teilnehmender Beobachtung zusätzlich zu Feldnotizen eingesetzt. Video dient zur Dokumentation von Interviews und Gruppendiskussionen. Bilder oder Filmsequenzen sind geeignet, um Kommunikation im Rahmen von Interviews zu stimulieren ("photo-elicitation", vgl. Prosser/Schwartz 1998, S. 123. In Pierre Bourdieus Arbeiten lassen sich einige interessante Beispiele für diesen Ansatz finden (Bourdieu 1987, S. 87. Eine weitere Möglichkeit besteht darin, bereits existierende visuelle Darstellungen von Subjekten zum Gegenstand der Analyse zu machen (z.B. Kinderzeichnungen oder Graffiti-Malereien; vgl. Neuß 1999; Holzwarth 2001. Interessante Erfahrungswerte gibt es auch im umfangreichen Gebiet des ethnologischen Films (u.a. Curtis, Flaherty, Mead, Rouch, insbesondere das dialogische Vorgehen bei Rouch (die Kamera als integraler Bestandteil der Erfahrung und Erkenntnis sozialer Wirklichkeit; vgl. Friedrich 1984.

  12. Die Übung an sich selbst außerhalb der Ästhetik: das Gegenmittel zu Instrumentalisierungen der Kultur.

    Directory of Open Access Journals (Sweden)

    Stanislas d’Ornano

    2005-10-01

    Full Text Available In heutiger Zeit den politischen Status der Kultur und der Kunst zu untersuchen setzt voraus, dass man ebenfalls drei Aspekte unserer Epoche in Betracht zieht. Wir haben die Orientierung verloren aufgrund des Widerspruchs zwischen der Vielfalt der Wege (Theorien, Lebensstile, Kunstrichtungen einerseits und der Vorstellung der Erreichung eines Ziels (das Ende der Geschichte, die vollkommene Gesellschaft andererseits. Wir erleben täglich die Situation einer zweifachen Instrumentalisierung, ...

  13. An algorithm for generation of DEMs from contour lines considering geomorphic features

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Rui

    2016-04-01

    Full Text Available Geomorphic information is omitted from many existing methods of generating gridded digital elevation models (DEMs from contour lines, resulting in significant errors during interpolation. Here, we present an advanced schema for improvement of the comprehensive regionalized method of linear interpolation. This approach uses a moving fitting method for an interpolated point and selects elevation points that are representative of geomorphic features as a whole to improve interpolation quality. A total of 16 points are selected, according to certain criteria, in eight directions surrounding the interpolated point; thus, there are two points in each direction, which is sufficient to provide an accurate representation of the geomorphic features of the DEM. Our method introduces virtual control points to prevent sudden changes in the interpolation results, which helps to overcome problems related to the distortion of the local geospatial distribution in areas where feature geomorphic information is inadequate. We construct the spline interpolation function using intersection points and virtual control points, all of which are applied to compute the point elevation. Moreover, we index all elevation values and spatial points of linear features using the R-tree method to ensure that points related to an interpolated position can be retrieved as quickly as possible. Finally, we test our method using a coal mine elevation dataset. The results confirm that our proposed method can generate DEMs smoothly and, in particular, avoid problems related to local distortion.    Resumen La información geomórfica se omite en muchos de los métodos de generación de Modelos Digitales de Elevación (DEM, en inglés que se elaboran a partir de líneas de contorno, lo que resulta en errores significativos durante la interpolación. En este trabajo se presenta un esquema avanzado para el mejoramiento del método comprensivo regionalizado de interpolación lineal. Esta

  14. Satisfação sexual na demência Sexual satisfaction in dementia

    Directory of Open Access Journals (Sweden)

    Marcela Moreira Lima Nogueira

    2013-01-01

    Full Text Available CONTEXTO: A demência pode resultar em comprometimento da intimidade e sexualidade de casais idosos. OBJETIVOS: Avaliar alterações na atividade sexual, bem como os fatores de satisfação e/ou insatisfação sexual de casais nos quais um dos parceiros possua demência. MÉTODO: Busca nas bases de dados ISI, PubMed/Medline e SciELO de artigos sobre sexualidade na demência, entre janeiro de 1990 e março de 2012, utilizando as palavras-chave: "demência", "satisfação sexual", "intimidade" e "sexualidade". RESULTADOS: Foram encontrados 12 artigos. A sobrecarga de cuidados e a alteração de papéis na relação conjugal foram consideradas as principais causas para o declínio da atividade sexual. A disfunção erétil em pacientes e cônjuges, a capacidade decisória para o consentimento da relação sexual por parte do paciente demenciado e os problemas referentes à idade e à saúde (física e emocional do cônjuge e/ou paciente foram os fatores associados à insatisfação sexual. CONCLUSÃO: A intimidade e a atividade sexual dos casais em que um dos parceiros é portador de demência são influenciadas negativamente pela relação de cuidados decorrente da doença e pela sobrecarga dos cônjuges. Por outro lado, a atividade sexual pode ser positivamente substituída por demonstrações de carinho e empatia entre os cônjuges.BACKGROUND: Dementia may result on impairment in intimacy and sexuality of elderly couples. OBJECTIVES: Evaluate changes in sexual activity, as well as the factors which cause sexual satisfaction and/or dissatisfaction in couples in which one of the partners has dementia. METHOD: A search at ISI, PubMed/Medline and SciELO was made for articles about sexuality in dementia, from January 1990 to March 2012, using the keywords: "dementia", "sexual satisfaction", "intimacy" and "sexuality". RESULTS: Twelve articles were selected. The burden of care and the change of roles in couples' relationship were the main reasons for

  15. Das Re-entry von Kritik: Assemblageforschung nach der Kritik an der Kritik. Kommentar zu Alexa Färbers „Potenziale freisetzen“

    Directory of Open Access Journals (Sweden)

    Hanna Göbel

    2014-05-01

    Full Text Available Der Kommentar zum Beitrag von Alexa Färber diskutiert eine Vermengung von drei unterschiedlichen Kritikbegriffen sowie Orten von Kritik in der aktuellen Debatte um die Assemblageforschung im Feld der Urban Studies. Ich rekonstruiere und unterscheide zwischen einem Kritikbegriff als theoretischer Norm, wie er von der (neo-marxistischen Stadt- und Raumforschung vertreten wird, und der ontologischen Kritik dieser Norm seitens der Assemblageforscher_innen. Alexa Färbers Beitrag zeigt drittens exemplarisch eine sich einschleichende normative Ebene in der Assemblageforschung auf, die bislang als Kritikform unterbelichtet geblieben ist. Diese wird als Wiedereinführung (re-entry von empirisch vollzogener Kritik in die Assemblageforschung bezeichnet. Damit ist eine theoretische Neupositionierung von Kritik ‚innerhalb’ einer Assemblage gemeint, indem Kritik nicht mehr als theoretische Norm ‚außerhalb’ zu verorten ist. In diesem Kommentar plädiere ich dafür, in der Assemblageforschung eine differenzierte Auseinandersetzung mit unterschiedlichen Begriffen und Orten von Kritik zu pflegen, um innerhalb der Urban Studies und für interessierte städtische Akteure mit urbaner Expertise (u.a. Architekt_innen, Planer_innen, Künstler_innen, Aktivist_innen, Kultur- und Sozialarbeiter_innen, DIY-Gemeinschaften klarer adressierbar zu sein.

  16. Für Forschung und Kultur - Öffentlichkeitswirksame Darstellung bibliothekarischer Weltschätze und bibliothekarischer Wissenschaftsservices am Beispiel der Staatsbibliothek zu Berlin

    Directory of Open Access Journals (Sweden)

    Barbara Schneider-Kempf

    2014-12-01

    Full Text Available Die Öffentlichkeitsarbeit der Staatsbibliothek zu Berlin zielt auf eine wirksame Darstellung ihrer bibliothekarischen Weltschätze und ihrer Serviceangebote für die Wissenschaft ab. Sie ruht auf drei Säulen: kulturelle Breitenbildung für wenig bibliotheksaffine Kreise, allgemeine und breit gefächerte Öffentlichkeitsarbeit sowie Aktionen, die sich an spezielle communities in der Wissenschaft richten. Der Beitrag informiert auch über die erfolgreiche Umsetzung dieser Strategie anhand zahlreicher Beispiele. Er zeigt, wie es der Staatsbibliothek in der Hauptstadt Berlin, in der viele Gedächtnisinstitutionen tätig sind, gelingt, öffentlich präsent zu bleiben und ihr Profil zu vermitteln. The public relations work of the Berlin State Library – Prussian Cultural Heritage aims at effectively presenting its globally significant treasures as well as its services for the scientific world. It is based on three pillars: cultural education for the general public, especially for people who are not naturally close to libraries; a general and wide variety of public relations work; and events which target special communities in science. The paper also presents many examples for the effectual implementation of this strategy. It shows how the State Library, in the capital city of Berlin with its many memory institutions, succeeds in keeping a strong presence and communicating its profile to the public.

  17. Optimizing landslide susceptibility zonation: Effects of DEM spatial resolution and slope unit delineation on logistic regression models

    Science.gov (United States)

    Schlögel, R.; Marchesini, I.; Alvioli, M.; Reichenbach, P.; Rossi, M.; Malet, J.-P.

    2018-01-01

    We perform landslide susceptibility zonation with slope units using three digital elevation models (DEMs) of varying spatial resolution of the Ubaye Valley (South French Alps). In so doing, we applied a recently developed algorithm automating slope unit delineation, given a number of parameters, in order to optimize simultaneously the partitioning of the terrain and the performance of a logistic regression susceptibility model. The method allowed us to obtain optimal slope units for each available DEM spatial resolution. For each resolution, we studied the susceptibility model performance by analyzing in detail the relevance of the conditioning variables. The analysis is based on landslide morphology data, considering either the whole landslide or only the source area outline as inputs. The procedure allowed us to select the most useful information, in terms of DEM spatial resolution, thematic variables and landslide inventory, in order to obtain the most reliable slope unit-based landslide susceptibility assessment.

  18. BOREAS HYD-8 DEM Data Over the NSA-MSA and SSA-MSA in the UTM Projection

    Science.gov (United States)

    Wang, Xue-Wen; Hall, Forrest G. (Editor); Knapp, David E. (Editor); Band, L. E.; Smith, David E. (Technical Monitor)

    2000-01-01

    The BOREAS HYD-8 team focused on describing the scaling behavior of water and carbon flux processes at local and regional scales. These DEMs were produced from digitized contours at a cell resolution of 100 meters. Vector contours of the area were used as input to a software package that interpolates between contours to create a DEM representing the terrain surface. The vector contours had a contour interval of 25 feet. The data cover the BOREAS MSAs of the SSA and NSA and are given in a UTM map projection. Most of the elevation data from which the DEM was produced were collected in the 1970s or 1980s. The data are stored in binary, image format files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  19. Benjamin Ortmeyer: Mythos und Pathos statt Logos und Ethos, Zu den Publikationen führender Erziehungswissenschaftler in der NS-Zeit: Eduard Spranger, Herman Nohl, Erich Weniger und Peter Petersen, Weinheim / Basel: Beltz 2009 [Rezension

    OpenAIRE

    Zimmer, Hasko

    2010-01-01

    Rezension von: Benjamin Ortmeyer: Mythos und Pathos statt Logos und Ethos, Zu den Publikationen führender Erziehungswissenschaftler in der NS-Zeit: Eduard Spranger, Herman Nohl, Erich Weniger und Peter Petersen, Weinheim / Basel: Beltz 2009, 606 S.

  20. The EVE plus RHESSI DEM for Solar Flares, and Implications for Residual Non-Thermal X-Ray Emission

    Science.gov (United States)

    McTiernan, James; Caspi, Amir; Warren, Harry

    2016-05-01

    Solar flare spectra are typically dominated by thermal emission in the soft X-ray energy range. The low energy extent of non-thermal emission can only be loosely quantified using currently available X-ray data. To address this issue, we combine observations from the EUV Variability Experiment (EVE) on-board the Solar Dynamics Observatory (SDO) with X-ray data from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI) to calculate the Differential Emission Measure (DEM) for solar flares. This improvement over the isothermal approximation helps to resolve the ambiguity in the range where the thermal and non-thermal components may have similar photon fluxes. This "crossover" range can extend up to 30 keV.Previous work (Caspi et.al. 2014ApJ...788L..31C) concentrated on obtaining DEM models that fit both instruments' observations well. For this current project we are interested in breaks and cutoffs in the "residual" non-thermal spectrum; i.e., the RHESSI spectrum that is left over after the DEM has accounted for the bulk of the soft X-ray emission. As in our earlier work, thermal emission is modeled using a DEM that is parametrized as multiple gaussians in temperature. Non-thermal emission is modeled as a photon spectrum obtained using a thin-target emission model ('thin2' from the SolarSoft Xray IDL package). Spectra for both instruments are fit simultaneously in a self-consistent manner.For this study, we have examined the DEM and non-thermal resuidual emission for a sample of relatively large (GOES M class and above) solar flares observed from 2011 to 2014. The results for the DEM and non-thermal parameters found using the combined EVE-RHESSI data are compared with those found using only RHESSI data.

  1. Influence of different DEMs on the quality of the InSAR results: case study over Bankya and Mirovo areas

    Science.gov (United States)

    Nikolov, Hristo; Atanasova, Mila

    2017-10-01

    One of the key input parameters in obtaining end products from SAR data is the DEM used during their processing. This holds true especially when persistent scatterers InSAR method should be applied for example to study slow moving landslides or subsidence. Since nowadays most of the raw SAR data are of space borne origin for their correct processing to high precision products for relatively small areas with centimeter accuracy a DEM taking into account the particularities of the local topography is needed. Most of the DEMs used by the SAR processing software such as SRTM or ASTER are obtained by the same type of instrument and present some disagreements with height information acquired by leveling measurements or other geodetic means. This was the motivation for initiating this research - to prove the need of creating and using local DEM in SAR data processing at small scale and to check what the magnitude of the discrepancy between final InSAR products is in both cases where SRTM/ASTER and local DEM has been used. In addition investigated were two scenarios for SAR data processing - one with small baseline between image pairs and one having large baseline image pairs - in order to find out in which case local DEM has bigger impact. In course of this study two reference areas were considered - Bankya village near Sofia (SW region of Bulgaria) and Mirovo salt extraction site (NE region of Bulgaria). The reason those areas were selected lies in the high number of landslides registered and monitored by the competent authorities in the mentioned locations. The significance of the results obtained is witnessed by the fact that both sites we used have been included as reference sites for Bulgaria in the PanGeo EU funded project dealing with delivering information regarding ground instability geohazard as areas prone to subsidence of natural and manmade origin. In the said project largest part of the information has been extracted from Envisat SAR data, but now this

  2. Nitrogen dioxide - current knowledge on the pollution situation and health effects; Stickstoffdioxid - Kenntnisstand zur Belastungssituation und zu gesundheitlichen Wirkungen

    Energy Technology Data Exchange (ETDEWEB)

    Muecke, H.G. [Umweltbundesamt, Berlin (Germany). Inst. fuer Wasser-, Boden- und Lufthygiene

    1999-07-01

    Feuerstellen (z.B. Gasherde, Gasheizautomaten und Heisswasserbereiter) und das Tabakrauchen sind die NO{sub 2}-Hauptquellen der Luftbelastung in Innenraeumen. NO{sub 2}-Messungen in deutschen Kuechen ergaben mittlere Konzentrationen von bis zu 50 {mu}g/m{sup 3} und Spitzenkonzentrationen von fast 200 {mu}G/m{sup 3}. Die NO{sub 2}-Konzentration in Innenraeumen ohne Stickstoffoxid-Quellen wird von den Aussenluftverhaeltnissen bestimmt und liegt im Durchschnitt zwischen 20 und 30 {mu}G/m{sup 3}. Die ueberarbeiteten NO{sub 2}-Richtwerte der WHO von 1998 sind: 40 {mu}g/m{sup 3} als Jahresmittel und 200 {mu}g/m{sup 3} als Einstundenmittel. Als oxidatives und gering wasserloesliches Reizgas entwickelt NO{sub 2} nach Inhalation seine Hauptwirkung in der Lungenperipherie. Veraenderungen von Lungenfunktionsparametern und Zunahme der bronchialen Reagibilitaet sind die wesentlichen gesundheitlichen Wirkungen. Expositionsstudien zur Belastungssituation zeigen, dass Innenraumquellen zusaetzlich im Mittel bis zu 5 {mu}g NO{sub 2}/m{sup 3} beitragen koennen und dass das Lueftungsverhalten als eine wesentliche Einflussgroesse mitangesehen werden kann. (orig.)

  3. From eco-efficiency in overall sustainable development in enterprises; Von Oekoeffizienz zu nachhaltiger Entwicklung in Unternehmen

    Energy Technology Data Exchange (ETDEWEB)

    Weizsaecker, E.U. von; Stigson, B; Seiler-Hausmann, J D [eds.

    2001-07-01

    Eco-efficiency is achieved when goods and services satisfy human needs, increase the quality of life, at prices which are competitive and when environmental impacts and resource intensity are decreased to a degree that they are in accordance with the expected capacities of the Earth. Eco-efficiency is a management approach that allows enterprises to carry out environmental protection measures from a market-oriented point of view. Eco-efficiency shows that ecology and economy do not contradict each other. On the contrary, in combination, they present a gain for enterprises. The motto is: To produce more with less. The WBCSD and its member enterprises have agreed to make economic growth and sustainable development the guideline for their economic entrepreneurial actions. The WBCSD supports the close co-operation of the economy, government and other organizations, as it is only together that we can help sustainable development to achieve a breakthrough. (orig.) [German] Oekoeffizienz ist dann erreicht, wenn Gueter und Dienstleistungen die menschlichen Beduerfnisse befriedigen, die Lebensqualitaet erhoehen und wettbewerbsfaehige Preise aufweisen, und die oekologischen Auswirkungen und die Ressourcenintensitaet waehrend des Lebenszyklus soweit verringert werden, dass eine Uebereinstimmung mit der voraussichtlichen Belastbarkeit der Erde besteht. Oekoeffizienz steht fuer einen Managementansatz, der Unternehmen erlaubt, Umweltschutzmassnahmen unter Marktgesichtspunkten durchzufuehren. Mit Oekoeffizienz wird zum Ausdruck gebracht, dass Oekonomie und Oekologie sich nicht ausschliessen, sondern in Kombination einen Gewinn fuer Unternehmen darstellen. Das Motto lautet: Mehr mit weniger produzieren. Der WBCSD und seine Mitgliedsunternehmen haben sich darauf verstaendigt, ihr Handeln von den Prinzipien des oekonomischen Wachstums und der nachhaltigen Entwicklung leiten zu lassen. Der WBCSD unterstuetzt die enge Zusammenarbeit von Wirtschaft, Staat und anderen Organisationen

  4. MARE2DEM: a 2-D inversion code for controlled-source electromagnetic and magnetotelluric data

    Science.gov (United States)

    Key, Kerry

    2016-10-01

    This work presents MARE2DEM, a freely available code for 2-D anisotropic inversion of magnetotelluric (MT) data and frequency-domain controlled-source electromagnetic (CSEM) data from onshore and offshore surveys. MARE2DEM parametrizes the inverse model using a grid of arbitrarily shaped polygons, where unstructured triangular or quadrilateral grids are typically used due to their ease of construction. Unstructured grids provide significantly more geometric flexibility and parameter efficiency than the structured rectangular grids commonly used by most other inversion codes. Transmitter and receiver components located on topographic slopes can be tilted parallel to the boundary so that the simulated electromagnetic fields accurately reproduce the real survey geometry. The forward solution is implemented with a goal-oriented adaptive finite-element method that automatically generates and refines unstructured triangular element grids that conform to the inversion parameter grid, ensuring accurate responses as the model conductivity changes. This dual-grid approach is significantly more efficient than the conventional use of a single grid for both the forward and inverse meshes since the more detailed finite-element meshes required for accurate responses do not increase the memory requirements of the inverse problem. Forward solutions are computed in parallel with a highly efficient scaling by partitioning the data into smaller independent modeling tasks consisting of subsets of the input frequencies, transmitters and receivers. Non-linear inversion is carried out with a new Occam inversion approach that requires fewer forward calls. Dense matrix operations are optimized for memory and parallel scalability using the ScaLAPACK parallel library. Free parameters can be bounded using a new non-linear transformation that leaves the transformed parameters nearly the same as the original parameters within the bounds, thereby reducing non-linear smoothing effects. Data

  5. Illustrations to “Gespräche in dem Reiche derer Todten zwischen dem vortreflichen Moscowitischen Czaar Petro Magno und dem grossen Tyrannen Ivan Basilowiz II” (Peter the Great and Ivan the Terrible by David Fassmann (1725

    Directory of Open Access Journals (Sweden)

    Ekaterina A. Skvortcova

    2017-12-01

    Full Text Available The journal created by David Fassmann (1683–1744, Gespräche in dem Reiche derer Todten, edited in Leipzig, was a huge success. Each of the 240 issues presents a dialogue between two historical figures from the afterworld. In the 83rd–86th Entrevuë, the interlocutors are Peter the Great and Ivan the Terrible. The texts of the four conversations were thoroughly examined by Eckhard Matthes (1987. The present paper explores how the illustrations to the 83rd–86th Entrevuë visualize the texts, which is significant as they were an important instrument for disseminating certain notions about Russia. While the illustration to the first dialogue of the suite juxtaposes Peter and Ivan, the illustration to the second one emphasizes the similarities between them. So the image of the “tyrant” and “barbarian” Ivan becomes a reference point with which a reader is urged to compare Peter’s deeds, seeing not only the differences but also the similarities. This greatly contributes to the creation of the multifaceted image of Russia of the early 18th century. The characters of the second illustration—a tiger and an executioner—can be identified as Ivan and Peter only if the reader takes into consideration an epigram to the illustration, the illustration to the previous dialogue, the text of the next Entrevuë, and facts about the execution of the strel’tsy known from other texts and images, about which Fassmann remains silent in the spirit of ars dissimulandi, which was typical for baroque culture. The paper offers an attempt to trace the iconography of the tyrant as a tiger. In the frontispiece to the 85th Entrevuë, a secretary bringing news from the world of the living and a portrait of Catherine I emphasize the connection of the past and the present, i.e., history and policy. Finally, the illustration to the last dialogue of the series returns to the glorification of Peter the Great declared in the first dialogue.

  6. Zur Entwicklung eines interaktiven Verfahrens der Sprachstandsermittlung bei mehrsprachig aufwachsenden Kindern – von der Idee zu ersten Umsetzungsschritten

    Directory of Open Access Journals (Sweden)

    Jörg Roche et al.

    2016-10-01

    Full Text Available Dieser Beitrag skizziert ein Konzept zur Sprachstandsermittlung, das aufbauend auf Ergebnissen der gebrauchsbasierten Spracherwerbsforschung die sprachlichen Fähigkeiten von Vorschulkindern in quasi-natürlichen Gesprächssituationen misst. Den Maßstab bilden dabei die altersgemäßen Deutschkompetenzen monolingualer und bilingualer Kinder im Vorschulalter. Mit dem neuen Verfahren soll eine akkurate Bewertung der kommunikativen Kompetenzen der Kinder am Übergang zur Schule erfolgen, die eine systematische Benachteiligung mehrsprachig aufwachsender Kinder aufgrund von Vergleichen mit zielsprachlichen Erwachsenennormen vermeidet. Das neuartige Erhebungsverfahren wird dabei in Form einer digitalen Spielumgebung (App entwickelt, die eine Umsetzung der Prinzipien des handlungsorientierten Sprachenlernens erlaubt. This paper presents the implementation of a new concept of first and second language assessment for pre-school children between four and six years. The concept is theoretically grounded in usage-based linguistics. It assesses language in authentic communicative settings in a game based app. The settings provide the children with incentives to engage in communication. As a result, the assessment tool does not evaluate formal aspects of language. Instead it relies on functional categories for evaluation. Norms for evaluations are derived from longitudinal corpus studies of authentic child language production. The goal of the new approach is to generate an accurate and fair assessments of the children’s communicative capacities. Pilot studies indicate that children with L2 German appear to be more advanced than shown by traditional form-based assessment methods.

  7. Bestimmung der Mas'se des neutralen Bs-Mesons mit dem ALEPH-Experiment

    CERN Document Server

    Stehle, M

    2001-01-01

    Gegenstand der vorliegenden Arbeit ist die Bestimmung der Masse des neutralen Bs-Mesons. Dazu wurden B~-Mesonen in den beiden Zerfallskanalen B~ -+ J/W P und B~ -+ W(2S) P rekonstruiert, wobei die Subresonanzen in den Zerfallsmoden J /w -+ l+ l-, W(2S) -+ l+ l- und P -+ K+ K- untersucht wurden. Diese beiden Kanale werden auf Grund ihrer eindeutigen Signatur auch als "goldene Kanale" bezeichnet und eignen sich deshalb sehr gut fur eine exklusive Rekonstruktion, wie sie hier angewendet wurde. Grundlage der Analyse waren ca. 4 Millionen hadronische ZO-Zerfalle, die in den Jahren 1991 1995 mit dem ALEPH-Detektor am e+e--Speicherring LEP am CERN aufgezeichnet wurden. Die zwischenzeitliche Reprozessierung der Daten ermoglichte eine prazisere und effizientere Rekonstruktion als das in fruheren Messungen der Fall war. Wegen der niedrigen Verzweigungsverhaltnisse der untersuchten Zerfallsmoden wurden nur wenige einzelne Ereignisse in den Daten erwartet. Die selektierten Kandidaten wurden durch Schnitte in mehreren Ere...

  8. Robust 3D Quantification of Glacial Landforms: A Use of Idealised Drumlins in a Real DEM

    Science.gov (United States)

    Hillier, J. K.; Smith, M. S.

    2012-04-01

    Drumlins' attributes, such as height (h) and volume (V ), may preserve important information about the dynamics of former ice sheets. However, measurement errors are large (e.g., 39.2% of V within ±25% of their real values for the 'cookie cutter') and, in general, poorly understood. To accurately quantify the morphology of glacial landforms, the relief belonging to that landform must be reliably isolated from other components of the landscape (e.g. buildings, hills). A number of techniques have been proposed for this regional-residual separation (RRS). Which is best? Justifications for those applied remain qualitative assertions. A recently developed, novel method using idealised drumlins of known size (hin, V in) in a real digital elevation model (DEM) is used to quantitatively determine the best RRS technique, allowing general guidelines for quantifying glacial landforms to be proposed. 184 drumlins with digitised outlines in western Central Scotland are used as a case study. The NEXTMap surface model (DSM) is the primary dataset employed. A variety of techniques are then investigated for their ability to recover sizes (hr, V r). A metric, ɛ, is used that maximises the number of Hr/Hin values near 1.0 whilst giving equal weight to different drumlin sizes: a metric dominated by the large number of small drumlins is not desirable. For simplicity, the semi-automated 'cookie cutter' technique is used as a baseline for comparison. This removes heights within a drumlin from a DEM, cuts a hole, then estimates its basal surface by interpolating across the space with a fully tensioned bi-cubic spline (-T1). Metrics for h and V are ɛh = 0.885 and ɛV = 0.247. Other tensions do not improve this significantly, with ɛV of 0.245 at best, but using Delauney triangulation reduces ɛV to 0.206. Windowed 'sliding median' filters, which do not require heights within drumlins to be removed, attain a minimum ɛV of 0.470 at a best width of 340 m (-Fm340). Finally, even crudely

  9. Combined DFT and DEMS investigation of the effect of dopants in secondary zinc‐air batteries

    DEFF Research Database (Denmark)

    Lysgaard, Steen; Christensen, Mathias K.; Hansen, Heine A.

    2018-01-01

    Zinc‐air batteries offer the potential of low cost energy storage with high energy density, but at present secondary batteries suffer from poor cyclability. To develop secondary Zn‐air batteries, several challenges need to be overcome: choking of the cathode, catalyzing the oxygen evolution...... and reduction reactions, limiting dendrite formation and the hydrogen evolution reaction (HER). Understanding and alleviating HER at the anode is a challenge, where it is necessary to involve computational as well as experimental research. Here, we combine Differential Electrochemical Mass Spectrometry (DEMS......) and density functional theory calculations to investigate the fundamental role and stability over cycling of possible additives such as In, Bi and Ag. We show that both In and Bi have the desired property for a secondary battery that upon recharging, they will remain in the surface, thereby retaining...

  10. Revealing topographic lineaments through IHS enhancement of DEM data. [Digital Elevation Model

    Science.gov (United States)

    Murdock, Gary

    1990-01-01

    Intensity-hue-saturation (IHS) processing of slope (dip), aspect (dip direction), and elevation to reveal subtle topographic lineaments which may not be obvious in the unprocessed data are used to enhance digital elevation model (DEM) data from northwestern Nevada. This IHS method of lineament identification was applied to a mosiac of 12 square degrees using a Cray Y-MP8/864. Square arrays from 3 x 3 to 31 x 31 points were tested as well as several different slope enhancements. When relatively few points are used to fit the plane, lineaments of various lengths are observed and a mechanism for lineament classification is described. An area encompassing the gold deposits of the Carlin trend and including the Rain in the southeast to Midas in the northwest is investigated in greater detail. The orientation and density of lineaments may be determined on the gently sloping pediment surface as well as in the more steeply sloping ranges.

  11. FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy

    Directory of Open Access Journals (Sweden)

    Ruitao Peng

    2016-01-01

    Full Text Available Due to the complicated contact loading at the tool-chip interface, ceramic tool wear in prestressed machining superalloy is rare difficult to evaluate only by experimental approaches. This study aims to develop a methodology to predict the tool wear evolution by using combined FEM and DEM numerical simulations. Firstly, a finite element model for prestressed cutting is established, subsequently a discrete element model to describe the tool-chip behaviour is established based on the obtained boundary conditions by FEM simulations, finally, simulated results are experimentally validated. The predicted tool wear results show nice agreement with experiments, the simulation indicates that, within a certain range, higher cutting speed effectively results in slighter wear of Sialon ceramic tools, and deeper depth of cut leads to more serious tool wear.

  12. Untersuchung der Produktion charmhaltiger Mesonen in der Photon-Photon-Streuung mit dem OPAL-Experiment

    CERN Document Server

    Patt, Jochen

    2001-01-01

    Die Produktion von Charm-Quarks in der Photon-Photon-Streuung wird ueber den Nachweis charmhaltiger Mesonen untersucht. Die Arbeit basiert auf den Daten, die mit dem OPAL-Detektor am Elektron-Positron-Speicherring LEP am CERN in Genf in den Jahren von 1989 bis 1998 aufgenommen worden sind. Anhand des Charmonium-Zustandes Chi(c2) wird die Resonanzproduktion von Charm-Quarks untersucht und die Zwei-Photon-Breite des Chi(c2)-Mesons wird gemessen. Geladene D*-Mesonen werden zur Untersuchung der offenen Produktion von Charm-Quarks benutzt. Der Anteil des direkten und des einfach-aufgeloesten Produktionsmechanismus, differentielle D*-Wirkungsquerschnitte, der totale Charm-Wirkungsquerschnitt sowie die Charm-Strukturfunktion des Photons werden bestimmt.

  13. Zur Rekonstruktion einer Typologie jugendlichen Medienhandelns gemäß dem Leitbild der Triangulation

    Directory of Open Access Journals (Sweden)

    Klaus Peter Treumann

    2017-09-01

    Full Text Available Die im Folgenden dargestellten Ergebnisse sind im Rahmen des von der DFG geförderten Forschungsprojekts „Eine Untersuchung zum Mediennutzungsverhalten 12- bis 20-Jähriger und zur Entwicklung von Medienkompetenz im Jugendalter“ entstanden, das gemeinsam von Klaus Peter Treumann, Uwe Sander und Dorothee Meister geleitet wird. Das Forschungsprojekt untersucht das Medienhandeln Jugendlicher sowohl hinsichtlich Neuer als auch alter Medien. Zum einen fragen wir dabei nach den Ausprägungen von Medienkompetenz in verschiedenen Dimensionen und zum anderen konzentrieren wir uns auf die Entwicklung einer empirisch fundierten Typologie jugendlichen Medienhandelns. Methodologisch ist die Untersuchung an dem Leitbild der Triangulation orientiert und kombiniert qualitative und quantitative Zugänge zum Forschungsfeld in Form von Gruppendiskussionen, leitfadengestützten Einzelinterviews und einer Repräsentativerhebung.

  14. DEM-CFD simulation of purge gas flow in a solid breeder pebble bed

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Li, Zhenghong [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); University of Science and Technology of China, Hefei 230027 (China); Guo, Haibing [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Ye, Minyou [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Huang, Hongwen, E-mail: inpclane@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

    2016-12-15

    Solid tritium breeding blanket applying pebble bed concept is promising for fusion reactors. Tritium bred in the pebble bed is purged out by inert gas. The flow characteristics of the purge gas are important for the tritium transport from the solid breeder materials. In this study, a randomly packed pebble bed was generated by Discrete Element Method (DEM) and verified by radial porosity distribution. The flow parameters of the purge gas in channels were solved by Computational Fluid Dynamics (CFD) method. The results show that the normalized velocity magnitudes have the same damped oscillating patterns with radial porosity distribution. Besides, the bypass flow near the wall cannot be ignored in this model, and it has a slight increase with inlet velocity. Furthermore, higher purging efficiency becomes with higher inlet velocity and especially higher in near wall region.

  15. Cerebellar volume in patients with dementia Volume cerebelar em pacientes com demência

    Directory of Open Access Journals (Sweden)

    Leonardo Baldaçara

    2011-01-01

    Mental e do Questionário de Atividades Funcionais. Os sujeitos foram divididos em cinco grupos de acordo com a Escala de Gravidade da Demência. Vinte e seis indivíduos do grupo original que não tinham o diagnóstico de demência no início do estudo foram reavaliados após dois anos para detectar o desenvolvimento da doença. RESULTADOS: Os volumes dos hemisférios cerebelares, lobo cerebelar posterior, vermis e lobo temporal estavam diminuídos proporcionalmente à gravidade da doença. Houve correlações positivas e significativas entre o Questionário de Atividades Funcionais, Mini Exame do Estado Mental e seus respectivos subtestes para linguagem e atenção com os volumes do lobo temporal e cerebelar. A análise de regressão logística demonstrou que o volume reduzido do lobo temporal, lobo cerebelar posterior e vermis pode ser um fator de risco para o futuro desenvolvimento de demência. CONCLUSÃO: Este é o primeiro estudo que demonstrou que o volume do cerebelo pode estar reduzido na fase pré-demência e reforça o papel dessa estrutura na progressão da doença de Alzheimer. Considerando que o cerebelo pode não estar diretamente associado com a origem da doença de Alzheimer, este achado tem valor para o prognóstico.

  16. Cerebellar volume in patients with dementia Volume cerebelar em pacientes com demência

    Directory of Open Access Journals (Sweden)

    Leonardo Baldaçara

    2011-06-01

    Mental e do Questionário de Atividades Funcionais. Os sujeitos foram divididos em cinco grupos de acordo com a Escala de Gravidade da Demência. Vinte e seis indivíduos do grupo original que não tinham o diagnóstico de demência no início do estudo foram reavaliados após dois anos para detectar o desenvolvimento da doença. RESULTADOS: Os volumes dos hemisférios cerebelares, lobo cerebelar posterior, vermis e lobo temporal estavam diminuídos proporcionalmente à gravidade da doença. Houve correlações positivas e significativas entre o Questionário de Atividades Funcionais, Mini Exame do Estado Mental e seus respectivos subtestes para linguagem e atenção com os volumes dos lobos temporal e cerebelar. A análise de regressão logística demonstrou que o volume reduzido do lobo temporal, lobo cerebelar posterior e vermis pode ser um fator de risco para o futuro desenvolvimento de demência. CONCLUSÃO: Este é o primeiro estudo que demonstrou que o volume do cerebelo pode estar reduzido na fase pré-demência e reforça o papel dessa estrutura na progressão da doença de Alzheimer. Considerando que o cerebelo pode não estar diretamente associado com a origem da doença de Alzheimer, este achado tem valor para o prognóstico.

  17. Coupled DEM-CFD analyses of landslide-induced debris flows

    CERN Document Server

    Zhao, Tao

    2017-01-01

    This book reflects the latest research results in computer modelling of landslide-induced debris flows. The book establishes an understanding of the initiation and propagation mechanisms of landslides by means of numerical simulations, so that mitigation strategies to reduce the long-term losses from landslide hazards can be devised. In this context, the book employs the Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) to investigate the mechanical and hydraulic behaviour of granular materials involved in landslides – an approach that yields meaningful insights into the flow mechanisms, concerning e.g. the mobilization of sediments, the generation and dissipation of excess pore water pressures, and the evolution of effective stresses. As such, the book provides valuable information, useful methods and robust numerical tools that can be successfully applied in the field of debris flow research.

  18. DEM4-26, Least Square Fit for IBM PC by Deming Method

    International Nuclear Information System (INIS)

    Rinard, P.M.; Bosler, G.E.

    1989-01-01

    1 - Description of program or function: DEM4-26 is a generalized least square fitting program based on Deming's method. Functions built into the program for fitting include linear, quadratic, cubic, power, Howard's, exponential, and Gaussian; others can easily be added. The program has the following capabilities: (1) entry, editing, and saving of data; (2) fitting of any of the built-in functions or of a user-supplied function; (3) plotting the data and fitted function on the display screen, with error limits if requested, and with the option of copying the plot to the printer; (4) interpolation of x or y values from the fitted curve with error estimates based on error limits selected by the user; and (5) plotting the residuals between the y data values and the fitted curve, with the option copying the plot to the printer. 2 - Method of solution: Deming's method

  19. Evaluating the Quality and Accuracy of TanDEM-X Digital Elevation Models at Archaeological Sites in the Cilician Plain, Turkey

    Directory of Open Access Journals (Sweden)

    Stefan Erasmi

    2014-10-01

    Full Text Available Satellite remote sensing provides a powerful instrument for mapping and monitoring traces of historical settlements and infrastructure, not only in distant areas and crisis regions. It helps archaeologists to embed their findings from field surveys into the broader context of the landscape. With the start of the TanDEM-X mission, spatially explicit 3D-information is available to researchers at an unprecedented resolution worldwide. We examined different experimental TanDEM-X digital elevation models (DEM that were processed from two different imaging modes (Stripmap/High Resolution Spotlight using the operational alternating bistatic acquisition mode. The quality and accuracy of the experimental DEM products was compared to other available DEM products and a high precision archaeological field survey. The results indicate the potential of TanDEM-X Stripmap (SM data for mapping surface elements at regional scale. For the alluvial plain of Cilicia, a suspected palaeochannel could be reconstructed. At the local scale, DEM products from TanDEM-X High Resolution Spotlight (HS mode were processed at 2 m spatial resolution using a merge of two monostatic/bistatic interferograms. The absolute and relative vertical accuracy of the outcome meet the specification of high resolution elevation data (HRE standards from the National System for Geospatial Intelligence (NSG at the HRE20 level.

  20. Quantitative Analysis of Accuracy of Voidage Computations in CFD-DEM Simulations

    Directory of Open Access Journals (Sweden)

    H. A. Khawaja

    2012-06-01

    Full Text Available CFD-DEM (Computational Fluid Dynamics – Discrete Element Modelling is a two-phase flow numerical modelling technique, where the Eulerian method is used for the fluid and the Lagrangian method for the particles. The two phases are coupled by a fluid-particle interaction force (i.e. drag force which is computed using a correlation. In a two-phase flow, one critical parameter is the voidage (or void fraction, which is defined as the ratio of the volume occupied by the fluid to the total volume. In a CFD-DEM simulation the local voidage is computed by calculating the volume of particles in a given fluid cell. For spherical particles, this computation is difficult when a particle is on the boundary of fluid cells. In this case, it is usual to compute the volume of a particle in a fluid cell approximately. One such approximation divides the volume of a particle into each cell in the same ratio as an equivalent cube of width equal to the particle diameter. Whilst this approach is computationally straight forward, the approximation introduces an error in the voidage computation. Here we estimate the error by comparing the approximate volume calculation with an exact (numerical computation of the volume of a particle in a fluid cell. The results show that the error varies with the position of the particle relative to the cell boundary. A new approach is suggested which limits the error to less than 2.5 %, without significantly increasing the computational complexity.

  1. Comparison Between 2D and 3D Simulations of Rate Dependent Friction Using DEM

    Science.gov (United States)

    Wang, C.; Elsworth, D.

    2017-12-01

    Rate-state dependent constitutive laws of frictional evolution have been successful in representing many of the first- and second- order components of earthquake rupture. Although this constitutive law has been successfully applied in numerical models, difficulty remains in efficient implementation of this constitutive law in computationally-expensive granular mechanics simulations using discrete element methods (DEM). This study introduces a novel approach in implementing a rate-dependent constitutive relation of contact friction into DEM. This is essentially an implementation of a slip-weakening constitutive law onto local particle contacts without sacrificing computational efficiency. This implementation allows the analysis of slip stability of simulated fault gouge materials. Velocity-stepping experiments are reported on both uniform and textured distributions of quartz and talc as 3D analogs of gouge mixtures. Distinct local slip stability parameters (a-b) are assigned to the quartz and talc, respectively. We separately vary talc content from 0 to 100% in the uniform mixtures and talc layer thickness from 1 to 20 particles in the textured mixtures. Applied shear displacements are cycled through velocities of 1μm/s and 10μm/s. Frictional evolution data are collected and compared to 2D simulation results. We show that dimensionality significantly impacts the evolution of friction. 3D simulation results are more representative of laboratory observed behavior and numerical noise is shown at a magnitude of 0.01 in terms of friction coefficient. Stability parameters (a-b) can be straightforwardly obtained from analyzing velocity steps, and are different from locally assigned (a-b) values. Sensitivity studies on normal stress, shear velocity, particle size, local (a-b) values, and characteristic slip distance (Dc) show that the implementation is sensitive to local (a-b) values and relations between (Dc) and particle size.

  2. A robust method of thin plate spline and its application to DEM construction

    Science.gov (United States)

    Chen, Chuanfa; Li, Yanyan

    2012-11-01

    In order to avoid the ill-conditioning problem of thin plate spline (TPS), the orthogonal least squares (OLS) method was introduced, and a modified OLS (MOLS) was developed. The MOLS of TPS (TPS-M) can not only select significant points, termed knots, from large and dense sampling data sets, but also easily compute the weights of the knots in terms of back-substitution. For interpolating large sampling points, we developed a local TPS-M, where some neighbor sampling points around the point being estimated are selected for computation. Numerical tests indicate that irrespective of sampling noise level, the average performance of TPS-M can advantage with smoothing TPS. Under the same simulation accuracy, the computational time of TPS-M decreases with the increase of the number of sampling points. The smooth fitting results on lidar-derived noise data indicate that TPS-M has an obvious smoothing effect, which is on par with smoothing TPS. The example of constructing a series of large scale DEMs, located in Shandong province, China, was employed to comparatively analyze the estimation accuracies of the two versions of TPS and the classical interpolation methods including inverse distance weighting (IDW), ordinary kriging (OK) and universal kriging with the second-order drift function (UK). Results show that regardless of sampling interval and spatial resolution, TPS-M is more accurate than the classical interpolation methods, except for the smoothing TPS at the finest sampling interval of 20 m, and the two versions of kriging at the spatial resolution of 15 m. In conclusion, TPS-M, which avoids the ill-conditioning problem, is considered as a robust method for DEM construction.

  3. Exploring the Potential of TanDEM-X Data in Rice Monitoring

    Science.gov (United States)

    Erten, E.

    2015-12-01

    In this work, phenological parameters such as growth stage, calendar estimation, crop density and yield estimation for rice fields are estimated employing TanDEM-X data. Currently, crop monitoring is country-dependent. Most countries have databases based on cadastral information and annual farmer inputs. Inaccuracies are coming from wrong or missing farmer declarations and/or coarsely updated cadastral boundary definitions. This leads to inefficient regulation of the market, frauds as well as to ecological risks. An accurate crop calendar is also missing, since farmers provide estimations in advance and there is no efficient way to know the growth status over large plantations. SAR data is of particular interest for these purposes. The proposed method includes two step approach including field detection and phenological state estimation. In the context of precise farming it is substantial to define field borders which are usually changing every cultivation period. Linking the SAR inherit properties to transplanting practice such as irrigation, the spatial database of rice-planted agricultural crops can be updated. Boundaries of agricultural fields will be defined in the database, and assignments of crops and sowing dates will be continuously updated by our monitoring system considering that sowing practice variously changes depending on the field owner decision. To define and segment rice crops, the system will make use of the fact that rice fields are characterized as flooded parcels separated by path networks composed by soil or rare grass. This natural segmentation is well detectable by inspecting low amplitude and coherence values of bistatic acquisitions. Once the field borders are defined, the phenology estimation of crops monitored at any time is the key point of monitoring. In this aspect the wavelength and the polarization option of TanDEM-X are enough to characterize the small phenological changes. The combination of bistatic interferometry and Radiative

  4. Application of Digital Elevation Model (DEM for description of soil microtopography changes in laboratory experiments

    Directory of Open Access Journals (Sweden)

    Stańczyk Tomasz

    2016-12-01

    Full Text Available In the study we evaluated spatial and quantitative changes in soil surface microtopography to describe water erosion process under simulated rain with use of a non-contact optical 3D scanner. The experiment was conducted in two variants: with and without drainage layer. Two clay soils collected from farmlands from the catchment of lake Zgorzała (Warsaw were investigated. Six tests of simulated rain were applied, with 55 mm·h−1. The surface roughness and microrelief were determined immediately after every 10 min of rainfall simulation by 3D scanner. The volume of surface and underground runoff as well as soil moisture were measured. The surface points coordinates obtained while scanning were interpolated using natural neighbour method and GIS software to generate Digital Elevation Models (DEM with a 0.5 mm resolution. Two DEM-derived surface roughness indices: Random Roughness (RR and Terrain Ruggedness Index (TRI were used for microrelief description. Calculated values of both roughness factors have decreased with time under the influence of rainfall in all analyzed variants. During the sprinkling the moisture of all samples had been growing rapidly from air-dry state reaching values close to the maximum water capacity (37–48% vol. in 20–30 min. Simultaneously the intensity of surface runoff was increasing and cumulative runoff value was: 17–35% for variants with drainage and 72–83% for the variants without drainage, relative to cumulative rainfall. The observed soil surface elevation changes were associated with aggregates decomposition, erosion and sedimentation, and above all, with a compaction of the soil, which was considered to be a dominant factor hindering the assessment of the erosion intensity of the of the scanned surface.

  5. Examination of the e{sup +} and e{sup +}e{sup -} pair emission from heavy ion collisions at the EPoS II spectrometer; Untersuchung der e{sup +}- und e{sup +}e{sup -}-Paaremission aus Schwerionenkollisionen mit dem EPoS II Spektrometer

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, J.

    1996-12-01

    In the course of examination of the positron and positron-electron pair emission from heavy ion collisions at the Coulomb barrier, the research groups EPOS I and ORANGE have found a number of line structures in the measured positron energy and cumulative pair energy spectra which up to present could not be fully explained, as theoretical interpretations so far remain inconsistent in some respects. For clarification, further measurements have been made at the completely new designed EPoS II spectrometer. Reproducibility of the lines is possible at a high level of statistical significance. (orig./CB) [Deutsch] Bei Untersuchungen der Positron- und Positron- Elektron- Paaremissionaus Schwerionenkollisionen an der Coulombbarriere wurde von den Gruppen EPOS I und ORANGE eine Reihe von Linienstrukturen in den gemessenen Positronenenergie- und Paarsummenenergiespektren beobachtet, fuer die bislang keine in allen Punkten konsistente, theoretische Erklaerunggefunden werden konnte. Um ihre Ursachen zu klaeren, wurden mit dem voellig neu aufgebauten EPoS II Spektrometer weitere Messreihen durgefuehrt. Die Reproduzierbarkeit der Linien ist auf einem hohen statistischen Signifikanzniveau moeglich.

  6. EXTRACTING PRECISE AND AFFORDABLE DEMS DESPITE OF THE CLOUDS. AJAX: THE JOINING OF RADAR AND OPTICAL STRENGTHS

    Directory of Open Access Journals (Sweden)

    1 L. Cunin

    2012-07-01

    The DEMs extracted from TerraSAR-X and HRS proved extremely consistent with each other, showing a mean difference of 0.80m. This allows to propose a unified Elevation30 product to the users, with a guaranteed accuracy materialized into the product through a dedicated vertical Accuracy Commitment Mask.

  7. Relationship between oculomotor scanning determined by the DEM test and a contextual reading test in schoolchildren with reading difficulties.

    Science.gov (United States)

    Palomo-Alvarez, Catalina; Puell, María C

    2009-09-01

    The relationship between oculomotor scanning and reading in poor readers of primary school age is not well known. This study was designed to assess this relationship by determining mean Developmental Eye Movement (DEM) test times and reading speeds in a Spanish non-clinical population of children with poor reading skills but without dyslexia. We conducted a cross-sectional study on 81 poor readers (8-11 years of age) in the third to fifth grades recruited from 11 elementary schools in Madrid, Spain. In each subject with best spectacle correction, oculomotor scanning was measured using the DEM test, and reading speed (words per minute) was assessed by a standardized Spanish contextual reading test. Mean horizontal DEM times were higher than normative values for children in the third, fourth and fifth grades, by 20 seconds, 12 seconds, and 3 seconds respectively. Mean reading speeds were 18 words per minute lower than the norm for the third and fourth grades respectively, and 30 words per minute lower than the norm for the fifth grade. Reading speeds were significantly related to horizontal DEM times (r = -0.53, p school children at an early stage.

  8. Briefe aus dem Morgenland - Otto Friedrich von Richters Forschungsreise in den Jahren 1814-1816 / Vladimir Sazonov

    Index Scriptorium Estoniae

    Sazonov, Vladimir, 1979-

    2013-01-01

    Arvustus: Briefe aus dem Morgenland - Otto Friedrich von Richters Forschungsreise in den Jahren 1814-1816, hrsg. von Indrek Jürjo, Sergei Stadnikov, Hamburger Beiträge zur Geschichte des östlichen Europa, Bd. 20. Hamburg: Verlag Dr. Kovač 2013, 313 lk.

  9. Assessment of neuro-optometric rehabilitation using the Developmental Eye Movement (DEM test in adults with acquired brain injury

    Directory of Open Access Journals (Sweden)

    Neera Kapoor

    2018-04-01

    Full Text Available Purpose: This pilot study sought to determine the efficacy of using the Developmental Eye Movement (DEM test in the adult, acquired brain injury (ABI population to quantify clinically the effects of controlled, laboratory-performed, oculomotor-based vision therapy/vision rehabilitation. Methods: Nine adult subjects with mild traumatic brain injury (mTBI and five with stroke were assessed before and after an eight-week, computer-based, versional oculomotor (fixation, saccades, pursuit, and simulated reading training program (9.6 h total. The protocol incorporated a cross-over, interventional design with and without the addition of auditory feedback regarding two-dimensional eye position. The clinical outcome measure was the Developmental Eye Movement (DEM test score (ratio, errors taken before, midway, and immediately following training. Results: For the DEM ratio parameter, improvements were found in 80–89% of the subjects. For the DEM error parameter, improvements were found in 100% of the subjects. Incorporation of the auditory feedback component revealed a trend toward enhanced performance. The findings were similar for both DEM parameters, as well as for incorporation of the auditory feedback, in both diagnostic groups. Discussion: The results of the present study demonstrated considerable improvements in the DEM test scores following the oculomotor-based training, thus reflecting more time-optimal and accurate saccadic tracking after the training. The DEM test should be considered as another clinical test of global saccadic tracking performance in the ABI population. Resumen: Objetivo: Este estudio piloto trató de determinar la eficacia del uso de la prueba DEM (Developmental Eye Movement en la población adulta con daño cerebral adquirido (DCA para cuantificar clínicamente los efectos de la rehabilitación/terapia visual controlada, realizada en laboratorio, y de carácter oculomotor. Métodos: Se valoraron nueve sujetos adultos con

  10. DEM Development from Ground-Based LiDAR Data: A Method to Remove Non-Surface Objects

    Directory of Open Access Journals (Sweden)

    Maneesh Sharma

    2010-11-01

    Full Text Available Topography and land cover characteristics can have significant effects on infiltration, runoff, and erosion processes on watersheds. The ability to model the timing and routing of surface water and erosion is affected by the resolution of the digital elevation model (DEM. High resolution ground-based Light Detecting and Ranging (LiDAR technology can be used to collect detailed topographic and land cover characteristic data. In this study, a method was developed to remove vegetation from ground-based LiDAR data to create high resolution DEMs. Research was conducted on intensively studied rainfall–runoff plots on the USDA-ARS Walnut Gulch Experimental Watershed in Southeast Arizona. LiDAR data were used to generate 1 cm resolution digital surface models (DSM for 5 plots. DSMs created directly from LiDAR data contain non-surface objects such as vegetation cover. A vegetation removal method was developed which used a slope threshold and a focal mean filter method to remove vegetation and create bare earth DEMs. The method was validated on a synthetic plot, where rocks and vegetation were added incrementally. Results of the validation showed a vertical error of ±7.5 mm in the final DEM.

  11. Numerical Investigation of Simultaneously Deposition and Re-Entrainment Fouling Processes in Corrugated Tubes by Coupling CFD and DEM

    DEFF Research Database (Denmark)

    Hærvig, Jakob; Condra, Thomas Joseph; Sørensen, Kim

    Computational Fluid Dynamics (CFD) software OpenFOAM is coupled to the Discrete Element Method (DEM) software LIGGGHTS using the coupling software CFDEM. A four-way coupling is used to model fluid-particle and particle-particle interactions and thereby allowing for a particle fouling layer to build up along...

  12. Improving low-relief coastal LiDAR DEMs with hydro-conditioning of fine-scale and artificial drainages

    Directory of Open Access Journals (Sweden)

    Thomas Richard Allen

    2015-11-01

    Full Text Available Improvements in Light Detection and Ranging (LiDAR technology and spatial analysis of high-resolution digital elevation models (DEMs have advanced the accuracy and diversity of applications for coastal hazards and natural resources management. This article presents a concise synthesis of LiDAR analysis for coastal flooding and management applications in low-relief coastal plains and a case study demonstration of a new, efficient drainage mapping algorithm. The impetus for these LiDAR applications follows historic flooding from Hurricane Floyd in 1999, after which the State of North Carolina and the Federal Emergency Management Agency undertook extensive LiDAR data acquisition and technological developments for high-resolution floodplain mapping. An efficient algorithm is outlined for hydro-conditioning bare earth LiDAR DEMs using available US Geological Survey National Hydrography Dataset canal and ditch vectors. The methodology is illustrated in Moyock, North Carolina, for refinement of hydro-conditioning by combines pre-existing bare earth DEMs with spatial analysis of LiDAR point clouds in segmented and buffered ditch and canal networks. The methodology produces improved maps of fine-scale drainage, reduced omission of areal flood inundation, and subwatershed delineations that typify heavily ditched and canalled drainage areas. These preliminary results illustrate the capability of the technique to improve the representation of ditches in DEMs as well as subsequent flow and inundation modeling that could spur further research on low-relief coastal LiDAR applications.

  13. Investigation of Drag Force on Fibres of Bonded Spherical Elements using a Coupled CFD-DEM Approach

    DEFF Research Database (Denmark)

    Jensen, Anna Lyhne; Sørensen, Henrik; Rosendahl, Lasse Aistrup

    2016-01-01

    Clogging in wastewater pumps is often caused by flexible, stringy objects. Therefore, simulation of clogging effects in wastewater pumps entails simulation of such flexible objects and the interaction between these objects and fluid in the pump. Using a coupled CFD-DEM approach, the flexible obje...

  14. BOREAS HYP-8 DEM Data Over The NSA-MSA and SSA-MSA in The AEAC Projection

    Science.gov (United States)

    Knapp, David E.; Hall, Forrest G. (Editor); Wang, Xue-Wen; Band, L. E.; Smith, David E. (Technical Monitor)

    2000-01-01

    These data were derived from the original Digital Elevation Models (DEMs) produced by the Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team. The original DEMs were in the Universal Transverse Mercator (UTM) projection, while this product is projected in the Albers Equal-Area Conic (AEAC) projection. The pixel size of the data is 100 meters, which is appropriate for the 1:50,000-scale contours from which the DEMs were made. The original data were compiled from information available in the 1970s and 1980s. This data set covers the two Modeling Sub-Areas (MSAs) that are contained within the Southern Study Area (SSA) and the Northern Study Area (NSA). The data are stored in binary, image format files. The DEM data over the NSA-MSA and SSA-MSA in the AEAC projection are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

  15. Computerunterstützte Sacherschließung mit dem Digitalen Assistenten (DA-2

    Directory of Open Access Journals (Sweden)

    Imma Hinrichs

    2016-12-01

    Full Text Available Wir beschreiben den Digitalen Assistenten DA-2, den wir zur Unterstützung der Sacherschliessung im IBS-Verbund implementiert haben. Diese webbasierte Anwendung ist eine vollständige Neuimplementierung, welche die Erkenntnisse des Vorgängersystems bei der Zentralbibliothek Zürich berücksichtigt. Wir stellen Überlegungen zur Zukunft der Sacherschliessung an und geben eine Übersicht über Projekte mit ähnlichen Zielsetzungen, die Sacherschließung mit Computerunterstützung effizienter und besser zu gestalten.   We describe the digital assistant DA-2 which we have implemented to support the subject indexing process in the IBS-Verbund. This web-based service is a new implementation from scratch based on the lessons learned with its predecessor used by the Zentralbibliothek Zürich. We also discuss the future of intellectual subject indexing and we give an overview on related projects also aiming at digitizing and economizing this challenging process.

  16. Stimmen zu Estlands Eurobeitritt

    Index Scriptorium Estoniae

    2011-01-01

    Arvamusi Eesti liitumisest eurotsooniga: Toomas Hendrik Ilves, Andrus Ansip, Juhan Parts, Angela Merkel, Jose Manuel Barroso, Olli Rehn, Paul Krugman Anti Poolamets, Nicolaus Heinen, Edgar Savisaar. Lisatud väljavõtted saksakeelsetest ajakirjadest ja ajalehtedest. Euro kasutuselevõttu seostatakse heaolu ja stabiilsusega, samas peetakse üleminekut uuele vääringule liiga kulukaks ja rutakaks

  17. High-accuracy single-pass InSAR DEM for large-scale flood hazard applications

    Science.gov (United States)

    Schumann, G.; Faherty, D.; Moller, D.

    2017-12-01

    In this study, we used a unique opportunity of the GLISTIN-A (NASA airborne mission designed to characterizing the cryosphere) track to Greenland to acquire a high-resolution InSAR DEM of a large area in the Red River of the North Basin (north of Grand Forks, ND, USA), which is a very flood-vulnerable valley, particularly in spring time due to increased soil moisture content near state of saturation and/or, typical for this region, snowmelt. Having an InSAR DEM that meets flood inundation modeling and mapping requirements comparable to LiDAR, would demonstrate great application potential of new radar technology for national agencies with an operational flood forecasting mandate and also local state governments active in flood event prediction, disaster response and mitigation. Specifically, we derived a bare-earth DEM in SAR geometry by first removing the inherent far range bias related to airborne operation, which at the more typical large-scale DEM resolution of 30 m has a sensor accuracy of plus or minus 2.5 cm. Subsequently, an intelligent classifier based on informed relationships between InSAR height, intensity and correlation was used to distinguish between bare-earth, roads or embankments, buildings and tall vegetation in order to facilitate the creation of a bare-earth DEM that would meet the requirements for accurate floodplain inundation mapping. Using state-of-the-art LiDAR terrain data, we demonstrate that capability by achieving a root mean squared error of approximately 25 cm and further illustrating its applicability to flood modeling.

  18. Weltliche Einflüsse in der Notre-Dame-Musik? Überlegungen zu einer Klausel im Codex F

    Directory of Open Access Journals (Sweden)

    Büttner, Fred

    2002-12-01

    Full Text Available The unlimited validity of the rectilinear evolution that, according to Friedrich Ludwig, led from Notre Dame Clausula to Latin and thenceforth to French Motet was most recently questioned by Wolf Frobenius in his article "Zum genetischen Verhältnis zwischen Notre-Dame-Klauseln und ihren Motetten" (1987. Nevertheless, Frobenius does not thoroughly examine the pieces concerned, with hardly more far-reaching conclusions being attached to the priority claimed for many French Motets when comparing their concordances as Clausula and Latin Motet. With a setting of the choral melisma "ne" (Sm8 - already used by Ludwig in order to substantiate his estimation of the historical precedence of the Clausula - as an example, the point of view held by Frobenius is therefore once again subjected to critical scrutiny. Thus several traits can be established in the specifics of the Clausula that point to the field of secular music. Although this corroborates the considerations made by Frobenius, on the other hand such a result will open up new perspectives for further research into the School of Notre Dame.

    [de] Spätestens durch den Aufsatz „Zum genetischen Verhältnis zwischen Notre-Dame-Klauseln und ihren Motetten" von Wolf Frobenius (1987 wurde die uneingeschränkte Gültigkeit des geradlinigen Entwicklungsgangs, den Friedrich Ludwig von der Notre-Dame-Klausel über die lateinische bis zur franzosischen Motette zeichnete, in Frage gestellt. Jedoch bleibt Frobenius eine gründliche Untersuchung der betreffenden Stücke ebenso schuldig, wie auch an die behauptete Priorität vieler französischer Motetten gegenüber ihren Konkordanzen als Klausel und lateinische Motette kaum weiterreichende Schlußfolgerungen geknüpft werden. Anhand des „Ne"-Satzes Sm8, den bereits Ludwig exemplarisch hervorhob, um seine Auffassung von der Klausel als ältestem Stadium zu belegen, wird deshalb die Sichtweise von Frobenius noch einmal auf ihre Stichhaltigkeit

  19. Der grüne Weg zu Open Access: institutionelle und fachliche Repositorien / The Green Road to Open access: institutional and subject repositories

    Directory of Open Access Journals (Sweden)

    Bauer, Bruno

    2009-06-01

    Full Text Available The recent issue 1/2009 of GMS Medizin – Bibliothek – Information has a focus on „The green road to open Access: institutional and subject repositories“. Self-archiving and storing scholarly publications on a print server were also central topics in many presentations at the 9th International Bielefeld Conference in February 2009. The authors in this issue are Birgit Schmidt and Karin Ilg-Hartecke (Open Access in Deutschland – erweiterte Perspektiven für die Wissenschaft, Christoph Bruch and Anja Lengenfelder (Unterstützung des Grünen Weges zu Open Access an der Max-Planck-Gesellschaft, Ulrich Herb and Matthias Müller (Nuancen in Grün: Betrieb eines institutionellen und disziplinären Repositoriums – Erfahrungen und Entwicklungen an der Saarländischen Universitäts- und Landesbibliothek, Timo Borst and Jan B. Weiland (EconStor: ein fachliches Repositorium für die Wirtschaftswissenschaften, Antonella de Robbio and Michael Katzmayr (The management of an international open access repository: the case of E-LIS and Christian Gumpenberger (The EPrints story: Southampton as the cradle of institutional self-archiving.Furthermore this focus issue features an interview of a representative of a research funding organisation (Repositorien: Der grüne Weg zu Open Access Publishing aus der Perspektive einer Forschungsförderungsorganisation. 10 Fragen von Bruno Bauer an Falk Reckling, Mitarbeiter des FWF Der Wissenschaftsfonds and an interview of a publisher (Repositorien: Der grüne Weg zu Open Access Publishing aus der Perspektive der International Association of Scientific, Technical & Medical Publishers (STM: 10 Fragen von Bruno Bauer an Barbara Kalumenos, Director of Public Affairs bei STM.

  20. Erhöht ein Opfer-Täter-Zyklus das Risiko, Sexualstraftaten als pädosexuelle Straftaten zu begehen? : Ergebnisse einer ereignisanalytischen Pilotstudie

    OpenAIRE

    Urban, Dieter; Lindhorst, Heiko

    2004-01-01

    Die Pilotstudie untersucht mittels multivariater Ereignisanalysen den Übergang vom ehemaligen Opfer pädosexuellen bzw. körperlichen Missbrauchs zum pädosexuellen Täter im Lebensverlauf verurteilter Sexualstraftäter. Zur Erklärung dieses Übergangs werden aus den wichtigsten täterorientierten Theoriemodellen drei Hypothesen abgeleitet, die empirisch getestet werden sollen. Diese Hypothesen betreffen das Risiko, nach Opfererfahrungen in der Kindheit zum Täter pädosexuellen Missbrauchs zu werden....

  1. Erhöht ein Opfer-Täter-Zyklus das Risiko, Sexualstraftaten als pädosexuelle Straftaten zu begehen? : Ergebnisse einer ereignisanalytischen Pilotstudie

    OpenAIRE

    Urban, Dieter; Lindhorst, Heiko

    2004-01-01

    "Die Pilotstudie untersucht mittels multivariater Ereignisanalysen den Übergang vom ehemaligen Opfer pädosexuellen bzw. körperlichen Missbrauchs zum pädosexuellen Täter im Lebensverlauf verurteilter Sexualstraftäter. Zur Erklärung dieses Übergangs werden aus den wichtigsten täterorientierten Theoriemodellen drei Hypothesen abgeleitet, die empirisch getestet werden sollen. Diese Hypothesen betreffen das Risiko, nach Opfererfahrungen in der Kindheit zum Täter pädosexuellen Missbrauchs zu werden...

  2. Rezension zu: Thomas Ballhausen, Thomas Edlinger, Linda Henschel, Katherina Zakrawsky: The Porn Identity. Expeditionen in die Dunkelzone. Nürnberg: Verlag für Moderne Kunst 2009.

    Directory of Open Access Journals (Sweden)

    Florian Cramer

    2010-02-01

    Full Text Available Die Ausstellung „The Porn Identity“ und ihr begleitender Katalog- und Essayband kartografieren die Schnittmengen von Pornografie, zeitgenössischer Kunst und Kulturtheorie umfassend genug, um als Einführungen ins Themengebiet nützlich zu sein. Indem der Katalog Pornobilder und -lifestyle zugleich schwelgerisch zelebriert und genderpolitisch-korrekt verbrämt, ist er jedoch so schmierig wie kommerzielle Pornografie. Dies macht ihn zum Konzeptkunstwerk – und setzt Fragezeichen hinter den Diskurs der porn studies.

  3. Benefit analysis of e-business solutions for utilities; Nutzenbetrachtung von E-Business-Branchenloesungen. Der Online-Weg zu den Privatkunden

    Energy Technology Data Exchange (ETDEWEB)

    Koch, M.; Baier, D. [Lehrstuhl fuer Marketing und Innovationsmanagement und BTU Cottbus (Germany)

    2003-04-07

    E-Business-applications for internal and external business processes are an often dealt subject. In opposition to that the implementation of E-Business-Systems at the interface to the many private customers are taken only few notice. Even though the implementation requires additional investments utilities could save considerable costs. (orig.) [German] Die Unterstuetzung der internen und externen Geschaeftsprozesse durch E-Business-Systeme ist eine aufgrund ihrer Bedeutung oft behandelte Thematik. Weitgehend unbeachtet blieb bisher der Einsatz von E-Business-Systemen an der Schnittstelle zu den vielen Privatkunden. Trotz zusaetzlich notwendiger Investitionen lassen sich gerade an dieser Stelle hohe Kosten sparen. (orig.)

  4. Rezension zu: Vera Cuntz-Leng: Harry Potter Que(er. Eine Filmsaga im Spannungsfeld von Queer-Reading, Slash-Fandom und Fantasyfilmgenre. Bielefeld: transcript Verlag 2015.

    Directory of Open Access Journals (Sweden)

    Marcus Felix

    2016-12-01

    Full Text Available Vera Cuntz-Leng brilliert mit einer queertheoretischen Untersuchung der Romanreihe um den Zauberlehrling Harry Potter und ihrer Verfilmung, die beide durch eine Form der Fanfiction, dem Slash, einer queeren Auswertung ausgesetzt sind. Mit der Verzahnung von queertheoretischer Relektüre und der Analyse queerer Fanpraxis gelingt es der Autorin herauszustellen, weshalb sich die Septalogie herausragender Beliebtheit bei queerer Harry-Potter-Fan-Art erfreut. Sie erweitert dadurch nicht nur den Blickwinkel auf das Phänomen Harry Potter, das durch das inflationäre Neu- und Weiterschreiben durch Fans ein Eigenleben entwickelt hat. Sie trägt damit auch zur Verwissenschaftlichung des Subgenres Fantasy bei und dem mangelnden Interesse der Queer Theory am popkulturellen Phänomen des Fandom Rechnung.

  5. Understanding the microscopic moisture migration in pore space using DEM simulation

    Directory of Open Access Journals (Sweden)

    Yuan Guo

    2015-04-01

    Full Text Available The deformation of soil skeleton and migration of pore fluid are the major factors relevant to the triggering of and damages by liquefaction. The influence of pore fluid migration during earthquake has been demonstrated from recent model experiments and field case studies. Most of the current liquefaction assessment models are based on testing of isotropic liquefiable materials. However the recent New Zealand earthquake shows much severer damages than those predicted by existing models. A fundamental cause has been contributed to the embedded layers of low permeability silts. The existence of these silt layers inhibits water migration under seismic loads, which accelerated liquefaction and caused a much larger settlement than that predicted by existing theories. This study intends to understand the process of moisture migration in the pore space of sand using discrete element method (DEM simulation. Simulations were conducted on consolidated undrained triaxial testing of sand where a cylinder sample of sand was built and subjected to a constant confining pressure and axial loading. The porosity distribution was monitored during the axial loading process. The spatial distribution of porosity change was determined, which had a direct relationship with the distribution of excess pore water pressure. The non-uniform distribution of excess pore water pressure causes moisture migration. From this, the migration of pore water during the loading process can be estimated. The results of DEM simulation show a few important observations: (1 External forces are mainly carried and transmitted by the particle chains of the soil sample; (2 Porosity distribution during loading is not uniform due to non-homogeneous soil fabric (i.e. the initial particle arrangement and existence of particle chains; (3 Excess pore water pressure develops differently at different loading stages. At the early stage of loading, zones with a high initial porosity feature higher

  6. CREATION OF A MULTIRESOLUTION AND MULTIACCURACY DTM: PROBLEMS AND SOLUTIONS FOR HELI-DEM CASE STUDY

    Directory of Open Access Journals (Sweden)

    L. Biagi

    2014-01-01

    Full Text Available The work is part of "HELI-DEM" (HELvetia-Italy Digital Elevation Model project, funded by the European Regional Development Fund within the Italy-Switzerland cooperation program. The aim of the project is the creation of a unique DTM for the alpine and subalpine area between Italy (Piedmont, Lombardy and Switzerland (Ticino and Grisons Cantons; at present, different DTMs, that are in different reference frames and have been obtained with different technologies, accuracies, and resolutions, have been acquired. The final DTM should be correctly georeferenced and produced validating and integrating the data that are available for the project. DTMs are fundamental in hydrogeological studies, especially in alpine areas where hydrogeological risks may exist. Moreover, when an event, like for example a landslide, happens at the border between countries, a unique and integrated DTM which covers the interest area is useful to analyze the scenario. In this sense, HELI-DEM project is helpful. To perform analyses along the borders between countries, transnational geographic information is needed: a transnational DTM can be obtained by merging regional low resolution DTMs. Moreover high resolution local DTMs should be used where they are available. To be merged, low and high resolution DTMs should be in the same three dimensional reference frame, should not present biases and should be consistent in the overlapping areas. Cross-validation between the different DTMs is therefore needed. Two different problems should be solved: the merging of regional, partly overlapping low and medium resolution DTMs into a unique low/medium resolution DTM and the merging with other local high resolution/high accuracy height data. This paper discusses the preliminary processing of the data for the fusion of low and high resolution DTMs in a study-case area within the Lombardy region: Valtellina valley. In this region the Lombardy regional low resolution DTM is available, with

  7. Fusion of space-borne multi-baseline and multi-frequency interferometric results based on extended Kalman filter to generate high quality DEMs

    Science.gov (United States)

    Zhang, Xiaojie; Zeng, Qiming; Jiao, Jian; Zhang, Jingfa

    2016-01-01

    Repeat-pass Interferometric Synthetic Aperture Radar (InSAR) is a technique that can be used to generate DEMs. But the accuracy of InSAR is greatly limited by geometrical distortions, atmospheric effect, and decorrelations, particularly in mountainous areas, such as western China where no high quality DEM has so far been accomplished. Since each of InSAR DEMs generated using data of different frequencies and baselines has their own advantages and disadvantages, it is therefore very potential to overcome some of the limitations of InSAR by fusing Multi-baseline and Multi-frequency Interferometric Results (MMIRs). This paper proposed a fusion method based on Extended Kalman Filter (EKF), which takes the InSAR-derived DEMs as states in prediction step and the flattened interferograms as observations in control step to generate the final fused DEM. Before the fusion, detection of layover and shadow regions, low-coherence regions and regions with large height error is carried out because MMIRs in these regions are believed to be unreliable and thereafter are excluded. The whole processing flow is tested with TerraSAR-X and Envisat ASAR datasets. Finally, the fused DEM is validated with ASTER GDEM and national standard DEM of China. The results demonstrate that the proposed method is effective even in low coherence areas.

  8. Experimental dem Extraction from Aster Stereo Pairs and 3d Registration Based on Icesat Laser Altimetry Data in Upstream Area of Lambert Glacier, Antarctica

    Science.gov (United States)

    Hai, G.; Xie, H.; Chen, J.; Chen, L.; Li, R.; Tong, X.

    2017-09-01

    DEM Extraction from ASTER stereo pairs and three-dimensional registration by reference to ICESat laser altimetry data are carried out in upstream area of Lambert Glacier, East Antarctica. Since the study area is located in inland of East Antarctica where few textures exist, registration between DEM and ICESat data is performed. Firstly, the ASTER DEM generation is based on rational function model (RFM) and the procedure includes: a) rational polynomial coefficient (RPC) computation from ASTER metadata, b) L1A image product de-noise and destriping, c) local histogram equalization and matching, d) artificial collection of tie points and bundle adjustment, and e) coarse-to-fine hierarchical matching of five levels and grid matching. The matching results are filtered semi-automatically. Hereafter, DEM is interpolated using spline method with ground points converted from matching points. Secondly, the generated ASTER DEM is registered to ICESat data in three-dimensional space after Least-squares rigid transformation using singular value decomposition (SVD). The process is stated as: a) correspondence selection of terrain feature points from ICESat and DEM profiles, b) rigid transformation of generated ASTER DEM using selected feature correspondences based on least squares technique. The registration shows a good result that the elevation difference between DEM and ICESat data is low with a mean value less than 2 meters and the standard deviation around 7 meters. This DEM is generated and specially registered in Antarctic typical region without obvious ground rock control points and serves as true terrain input for further radar altimetry simulation.

  9. Insight From the Statistics of Nothing: Estimating Limits of Change Detection Using Inferred No-Change Areas in DEM Difference Maps and Application to Landslide Hazard Studies

    Science.gov (United States)

    Haneberg, W. C.

    2017-12-01

    Remote characterization of new landslides or areas of ongoing movement using differences in high resolution digital elevation models (DEMs) created through time, for example before and after major rains or earthquakes, is an attractive proposition. In the case of large catastrophic landslides, changes may be apparent enough that simple subtraction suffices. In other cases, statistical noise can obscure landslide signatures and place practical limits on detection. In ideal cases on land, GPS surveys of representative areas at the time of DEM creation can quantify the inherent errors. In less-than-ideal terrestrial cases and virtually all submarine cases, it may be impractical or impossible to independently estimate the DEM errors. Examining DEM difference statistics for areas reasonably inferred to have no change, however, can provide insight into the limits of detectability. Data from inferred no-change areas of airborne LiDAR DEM difference maps of the 2014 Oso, Washington landslide and landslide-prone colluvium slopes along the Ohio River valley in northern Kentucky, show that DEM difference maps can have non-zero mean and slope dependent error components consistent with published studies of DEM errors. Statistical thresholds derived from DEM difference error and slope data can help to distinguish between DEM differences that are likely real—and which may indicate landsliding—from those that are likely spurious or irrelevant. This presentation describes and compares two different approaches, one based upon a heuristic assumption about the proportion of the study area likely covered by new landslides and another based upon the amount of change necessary to ensure difference at a specified level of probability.

  10. BRS Deméter: nova cultivar de cevada cervejeira irrigada para o Cerrado do Brasil Central BRS Deméter: new malting barley cultivar for irrigated Brazilian savanna

    Directory of Open Access Journals (Sweden)

    Renato Fernando Amabile

    2008-09-01

    Full Text Available BRS Deméter é uma cultivar de cevada dística (duas fileiras de grãos de ampla adaptação, sob irrigação, ao Cerrado do Brasil Central. Apresenta potencial produtivo de grãos acima de 5.000 kg ha-1, estabilidade de produção e alta qualidade industrial malte-cervejeira. A cultivar atende às demandas do produtor por rendimento competitivo e às da indústria malteira por alta qualidade cervejeira.BRS Deméter is a spring, two-rowed barley, widely adapted to irrigated areas of the savanna, in Central Brazil. It presents production stability and high malting quality, with yield potential above 5,000 kg ha-1. It fulfills both the farmer and malting industry expectations regarding competitive yield and brewing quality.

  11. Volcanic activity at Etna volcano, Sicily, Italy between June 2011 and March 2017 studied with TanDEM-X SAR interferometry

    Science.gov (United States)

    Kubanek, J.; Raible, B.; Westerhaus, M.; Heck, B.

    2017-12-01

    High-resolution and up-to-date topographic data are of high value in volcanology and can be used in a variety of applications such as volcanic flow modeling or hazard assessment. Furthermore, time-series of topographic data can provide valuable insights into the dynamics of an ongoing eruption. Differencing topographic data acquired at different times enables to derive areal coverage of lava, flow volumes, and lava extrusion rates, the most important parameters during ongoing eruptions for estimating hazard potential, yet most difficult to determine. Anyhow, topographic data acquisition and provision is a challenge. Very often, high-resolution data only exists within a small spatial extension, or the available data is already outdated when the final product is provided. This is especially true for very dynamic landscapes, such as volcanoes. The bistatic TanDEM-X radar satellite mission enables for the first time to generate up-to-date and high-resolution digital elevation models (DEMs) repeatedly using the interferometric phase. The repeated acquisition of TanDEM-X data facilitates the generation of a time-series of DEMs. Differencing DEMs generated from bistatic TanDEM-X data over time can contribute to monitor topographic changes at active volcanoes, and can help to estimate magmatic ascent rates. Here, we use the bistatic TanDEM-X data to investigate the activity of Etna volcano in Sicily, Italy. Etna's activity is characterized by lava fountains and lava flows with ash plumes from four major summit crater areas. Especially the newest crater, the New South East Crater (NSEC) that was formed in 2011 has been highly active in recent years. Over one hundred bistatic TanDEM-X data pairs were acquired between January 2011 and March 2017 in StripMap mode, covering episodes of lava fountaining and lava flow emplacement at Etna's NSEC and its surrounding area. Generating DEMs of every bistatic data pair enables us to assess areal extension of the lava flows, to

  12. Review of preliminary results of the project `Co-cracking of plastics and petroleum residues`; Uebersicht zu den ersten Ergebnissen des Projektes Cocracking von Kunststoffen und Erdoelrueckstand

    Energy Technology Data Exchange (ETDEWEB)

    Uhmann, R; Koepsel, R F; Kuchling, T; Simanjenkov, V [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Energieverfahrenstechnik und Chemieingenieurwesen

    1998-09-01

    Coprocessing of petroleum residues and plastics is a promising technology, although some problems concerning waste plastics must be clarified prior to its implementation. In general, it can be stated that with a careful choice of operating parameter combinations, oil yields will be higher than for thermal treatment of petroleum residues alone (e.g. a 35% yield increase is achieved by adding 25% of plastics, which is a disproportionately high increase). Waste plastics thus become a valuable material for processing. (orig.) [Deutsch] Das untersuchte Coprocessing von VR und Kunststoffen ist ein erfolgversprechender Weg der Kunststoffverwertung und des tiefen Crackens von Erdoelrueckstand. Die Klaerung der mit Altkunststoffen verbundenen Fragen bedarf weiterer Untersuchungen. Allgemein kann festgestellt werden, dass bei entsprechenden Parameterkombinationen bessere Oelausbeuten erzielt werden als bei der thermischen Behandlung von reinem VR. Ein Beispiel dafuer ist in der Abbildung 10 dargestellt. Durch eine 25%-ige Erhoehung der Einsatzstoffmasse durch Kunststoffzugabe wird eine im Vergleich zu reinem VR um ca. 36% hoehere Oelausbeute erzielt, was einer ueberproportionalen Erhoehung entspricht. Altkunststoff wird bei diesem Prozess unter Nutzung des Wasserstoff-potentials von Polymeren zu einem wertvollen Einsatzstoff. (orig.)

  13. "Bildung für nachhaltige Entwicklung" - die Sicht der Kinder : Ergebnisse aus dem weltweiten OMEP-Projekt

    OpenAIRE

    Engdahl, Ingrid

    2017-01-01

    Während der UNESCO Dekade „Bildung für nachhaltige Entwicklung“ (BNE) führte die Weltorganisation für Frühe Bildung (OMEP) zwischen 2009-2014 ein umfangreiches Projekt zum Thema Nachhaltigkeit durch. Das übergeordnete Ziel des Projektes war das Bewußtsein der OMEP Mitglieder und der internationalen Fachgemeinde für die Bildung für nachhaltige Entwicklung (BNE) zu stärken. Dabei wurde ein besonderer Fokus auf die kindorientierte Perspektive gelegt.

  14. DEM simulation of particle mixing for optimizing the overcoating drum in HTR fuel fabrication

    Science.gov (United States)

    Liu, Malin; Lu, Zhengming; Liu, Bing; Shao, Youlin

    2013-06-01

    The rotating drum was used for overcoating coated fuel particles in HTR fuel fabrication process. All the coated particles should be adhered to equal amount of graphite powder, which means that the particle should be mixed quickly in both radial and axial directions. This paper investigated the particle flow dynamics and mixing behavior in different regimes using the discrete element method (DEM). By varying the rotation speed, different flow regimes such as slumping, rolling, cascading, cataracting, centrifuging were produced. The mixing entropy based on radial and axial grid was introduced to describe the radial and axial mixing behaviors. From simulation results, it was found that the radial mixing can be achieved in the cascading regime more quickly than the slumping, rolling and centrifuging regimes, but the traditional rotating drum without internal components can not achieve the requirements of axial mixing and should be improved. Three different structures of internal components are proposed and simulated. The new V-shaped deflectors were found to achieve a quick axial mixing behavior and uniform axial distribution in the rotating drum based on simulation results. At last, the superiority was validated by experimental results, and the new V-shaped deflectors were used in the industrial production of the overcoating coated fuel particles in HTR fuel fabrication process.

  15. Investigating the Effects of Underplating at Raukumara Peninsula, New Zealand: Insights from DEM Modeling

    Science.gov (United States)

    Farrell, W. C.; Morgan, J.

    2017-12-01

    It is thought that subcretion and underplating are important processes at subduction zones worldwide. Despite its proposed common occurrence, the physical mechanisms controlling if underplating occurs and the rate of its associated uplift are poorly understood. Basic questions about the tectonic and geomechanical parameters governing subduction channel stability, subcretion, and the rate and shape of associated uplift have proven difficult to answer. In this study we employ the Discrete Element Method (DEM) to address these questions, using the Raukumara Peninsula of New Zealand as the real-world basis of many of our model inputs. Multiple geophysical datasets suggest that the Raukumara Peninsula is underlain by underplated sediments at Moho depths, and these may be responsible for anomalously high rates of uplift in the area. The combined geologic, geophysical, and geodetic data from the region serve to constrain model geometries and boundary conditions, allowing us to test the mechanisms for underplating and upper crustal response. The effects of surface processes and potential for shallow trenchward sliding are also investigated in the modeling effort.

  16. Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

    International Nuclear Information System (INIS)

    Cho, Migyung

    2017-01-01

    Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

  17. Discrete element method (DEM) simulations of stratified sampling during solid dosage form manufacturing.

    Science.gov (United States)

    Hancock, Bruno C; Ketterhagen, William R

    2011-10-14

    Discrete element model (DEM) simulations of the discharge of powders from hoppers under gravity were analyzed to provide estimates of dosage form content uniformity during the manufacture of solid dosage forms (tablets and capsules). For a system that exhibits moderate segregation the effects of sample size, number, and location within the batch were determined. The various sampling approaches were compared to current best-practices for sampling described in the Product Quality Research Institute (PQRI) Blend Uniformity Working Group (BUWG) guidelines. Sampling uniformly across the discharge process gave the most accurate results with respect to identifying segregation trends. Sigmoidal sampling (as recommended in the PQRI BUWG guidelines) tended to overestimate potential segregation issues, whereas truncated sampling (common in industrial practice) tended to underestimate them. The size of the sample had a major effect on the absolute potency RSD. The number of sampling locations (10 vs. 20) had very little effect on the trends in the data, and the number of samples analyzed at each location (1 vs. 3 vs. 7) had only a small effect for the sampling conditions examined. The results of this work provide greater understanding of the effect of different sampling approaches on the measured content uniformity of real dosage forms, and can help to guide the choice of appropriate sampling protocols. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Blurring the boundary between rapid granular flow and dense granular flow regimes: Evidence from DEM simulations

    Science.gov (United States)

    Tripathi, Anurag; Prasad, Mahesh; Kumar, Puneet

    2017-11-01

    The saturation of the effective friction coefficient for granular flows at high inertial numbers has been assumed widely by researchers, despite little simulation/experimental evidence. In contrast, a recent simulation study of plane shear flows by Mandal and Khakhar, suggests that the effective friction coefficient becomes maximum and then starts to decrease with increase in the inertial number for I > 0.5 . In order to investigate whether such a dip at higher inertial numbers is indeed a feature of granular rheology, we perform DEM simulations of chute flow of highly inelastic disks. We show that steady, fully developed flows are possible at inclinations much higher than those normally reported in literature. At such high inclinations, the flow is characterised by a significant slip at the base; the height of the layer increases by more than 300 % and kinetic energy of the layer increases by nearly 5 orders of magnitude. We observe, for the first time, steady chute flows at inertial number I 2 and show that the dip at higher inertial numbers can be observed in case of chute flow as well. The predictions of modified μ - I rheology, however, seem to remain valid in the bulk of the layer for packing fractions as low as 0.2. AT acknowledges the funding obtained from IIT Kanpur through the initiation Grant for this study.

  19. Mapping Landslides in Lunar Impact Craters Using Chebyshev Polynomials and Dem's

    Science.gov (United States)

    Yordanov, V.; Scaioni, M.; Brunetti, M. T.; Melis, M. T.; Zinzi, A.; Giommi, P.

    2016-06-01

    Geological slope failure processes have been observed on the Moon surface for decades, nevertheless a detailed and exhaustive lunar landslide inventory has not been produced yet. For a preliminary survey, WAC images and DEM maps from LROC at 100 m/pixels have been exploited in combination with the criteria applied by Brunetti et al. (2015) to detect the landslides. These criteria are based on the visual analysis of optical images to recognize mass wasting features. In the literature, Chebyshev polynomials have been applied to interpolate crater cross-sections in order to obtain a parametric characterization useful for classification into different morphological shapes. Here a new implementation of Chebyshev polynomial approximation is proposed, taking into account some statistical testing of the results obtained during Least-squares estimation. The presence of landslides in lunar craters is then investigated by analyzing the absolute values off odd coefficients of estimated Chebyshev polynomials. A case study on the Cassini A crater has demonstrated the key-points of the proposed methodology and outlined the required future development to carry out.

  20. Effect of Nonsmooth Nose Surface of the Projectile on Penetration Using DEM Simulation

    Directory of Open Access Journals (Sweden)

    Jing Han

    2017-01-01

    Full Text Available The nonsmooth body surface of the reptile in nature plays an important role in reduction of resistance and friction when it lives in a soil environment. To consider whether it was feasible for improving the performance of penetrating projectile we investigated the influence of the convex as one of nonsmooth surfaces for the nose of projectile. A numerical simulation study of the projectile against the concrete target was developed based on the discrete element method (DEM. The results show that the convex nose surface of the projectile is beneficial for reducing the penetration resistance greatly, which is also validated by the experiments. Compared to the traditional smooth nose structure, the main reason of difference is due to the local contact normal pressure, which increases dramatically due to the abrupt change of curvature caused by the convex at the same condition. Accordingly, the broken particles of the concrete target obtain more kinetic energy and their average radial flow velocities will drastically increase simultaneously, which is in favor of decreasing the interface friction and the compaction density of concrete target around the nose of projectile.

  1. Modelling of Coke Layer Collapse during Ore Charging in Ironmaking Blast Furnace by DEM

    Science.gov (United States)

    Narita, Yoichi; Mio, Hiroshi; Orimoto, Takashi; Nomura, Seiji

    2017-06-01

    A technical issue in an ironmaking blast furnace operation is to realize the optimum layer thickness and the radial distribution of burden (ore and coke) to enhance its efficiency and productivity. When ore particles are charged onto the already-embedded coke layer, the coke layer-collapse phenomenon occurs. The coke layer-collapse phenomenon has a significant effect on the distribution of ore and coke layer thickness in the radial direction. In this paper, the mechanical properties of coke packed bed under ore charging were investigated by the impact-loading test and the large-scale direct shear test. Experimental results show that the coke particle is broken by the impact force of ore charging, and the particle breakage leads to weaken of coke-layer strength. The expression of contact force for coke in Discrete Element Method (DEM) was modified based on the measured data, and it followed by the 1/3-scaled experiment on coke's collapse phenomena. Comparing a simulation by modified model to the 1/3-scaled experiment, they agreed well in the burden distribution.

  2. Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Migyung [Tongmyong Univ., Busan (Korea, Republic of)

    2017-02-15

    Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

  3. Waste incineration on its way to the power plants; Muellverbrennung auf dem Weg zum Kraftwerk

    Energy Technology Data Exchange (ETDEWEB)

    Reich, J. [STEAG encotec GmbH, Essen (Germany); Neukirchen, B. [STEAG AG, Essen (Germany)

    2004-07-01

    Looking at the year 2005 and the end of disposal of untreated domestic waste the politic hopes that the prognosticated lack of waste treatment capacity is remedied by coal-fired power plants. The classical municipal waste incinerators by contrast want to get recognition as energetic recycler in comparison with power stations. The decision of the European Court of Justice concerning recycling and disposal of domestic waste by incineration has started the discussion and competition on fuel-rich commercial waste. Are municipal waste incineration plants power stations or must power plants be regarded as incinerators? These questions are still open. (orig.) [German] Mit Blick auf das Jahr 2005 und das Ende der Ablagerung von unbehandeltem Siedlungsabfall hofft die Politik, dass der prognostizierte Mangel an Vorbehandlungskapazitaeten von den Kohlekraftwerken behoben wird. Die klassischen Muellverbrennungsanlagen wollen dagegen mit dem Kraftwerksvergleich die Anerkennung als energetische Verwerter erreichen. Das EuGH-Urteil zur Verwertung oder Beseitigung von Siedlungsabfall durch Verbrennen hat in diesem Jahr die Diskussion und den Kampf um den heizwertreichen Gewerbeabfall angeheizt. Die Frage, wie weit in Zukunft die Muellverbrennungsanlagen als Kraftwerke, aber auch die Kraftwerke als Muellverbrennungsanlagen angesehen werden muessen, ist noch offen. (orig.)

  4. Landslide Change Detection Based on Multi-Temporal Airborne LiDAR-Derived DEMs

    Directory of Open Access Journals (Sweden)

    Omar E. Mora

    2018-01-01

    Full Text Available Remote sensing technologies have seen extraordinary improvements in both spatial resolution and accuracy recently. In particular, airborne laser scanning systems can now provide data for surface modeling with unprecedented resolution and accuracy, which can effectively support the detection of sub-meter surface features, vital for landslide mapping. Also, the easy repeatability of data acquisition offers the opportunity to monitor temporal surface changes, which are essential to identifying developing or active slides. Specific methods are needed to detect and map surface changes due to landslide activities. In this paper, we present a methodology that is based on fusing probabilistic change detection and landslide surface feature extraction utilizing multi-temporal Light Detection and Ranging (LiDAR derived Digital Elevation Models (DEMs to map surface changes demonstrating landslide activity. The proposed method was tested in an area with numerous slides ranging from 200 m2 to 27,000 m2 in area under low vegetation and tree cover, Zanesville, Ohio, USA. The surface changes observed are probabilistically evaluated to determine the likelihood of the changes being landslide activity related. Next, based on surface features, a Support Vector Machine (SVM quantifies and maps the topographic signatures of landslides in the entire area. Finally, these two processes are fused to detect landslide prone changes. The results demonstrate that 53 out of 80 inventory mapped landslides were identified using this method. Additionally, some areas that were not mapped in the inventory map displayed changes that are likely to be developing landslides.

  5. Extraction of Dems and Orthoimages from Archive Aerial Imagery to Support Project Planning in Civil Engineering

    Science.gov (United States)

    Cogliati, M.; Tonelli, E.; Battaglia, D.; Scaioni, M.

    2017-12-01

    Archive aerial photos represent a valuable heritage to provide information about land content and topography in the past years. Today, the availability of low-cost and open-source solutions for photogrammetric processing of close-range and drone images offers the chance to provide outputs such as DEM's and orthoimages in easy way. This paper is aimed at demonstrating somehow and to which level of accuracy digitized archive aerial photos may be used within a such kind of low-cost software (Agisoft Photoscan Professional®) to generate photogrammetric outputs. Different steps of the photogrammetric processing workflow are presented and discussed. The main conclusion is that this procedure may come to provide some final products, which however do not feature the high accuracy and resolution that may be obtained using high-end photogrammetric software packages specifically designed for aerial survey projects. In the last part a case study is presented about the use of four-epoch archive of aerial images to analyze the area where a tunnel has to be excavated.

  6. Case studies of heat conduction in rotary drums with L-shaped lifters via DEM

    Directory of Open Access Journals (Sweden)

    Qiang Xie

    2018-03-01

    Full Text Available Rotary drums are widely used in numerous processes in industry to handle granular materials. In present work, heat transfer processes in drums with L-shaped lifters have been investigated by coupling the discrete element method (DEM with heat transfer model. Effects of both operational and structural parameters have been analyzed. It is found that increasing rotational speed could improve heat transfer to a certain extent, however, just in relatively low speed stage. When lifter number increases, the heat transfer speed slightly decreases. An increasing lifter height could promote heat transfer first and then reduces it, but the amplitude of variation keeps small. The heat transfer rate descends with increasing lifter width. The heat transfer mechanisms have also been discussed by comparing mixing rates, total contact areas for thermal conduction, time constants (TC indicating apparent heat transfer rate and effective heat transfer coefficients(HTC. It is concluded that dynamic conduction due to particle flow is dominated in all cases. The L-shaped lifers are turned out not a good choice when heat conduction between particles is prominent.

  7. Transformation (normalization) of slope gradient and surface curvatures, automated for statistical analyses from DEMs

    Science.gov (United States)

    Csillik, O.; Evans, I. S.; Drăguţ, L.

    2015-03-01

    Automated procedures are developed to alleviate long tails in frequency distributions of morphometric variables. They minimize the skewness of slope gradient frequency distributions, and modify the kurtosis of profile and plan curvature distributions toward that of the Gaussian (normal) model. Box-Cox (for slope) and arctangent (for curvature) transformations are tested on nine digital elevation models (DEMs) of varying origin and resolution, and different landscapes, and shown to be effective. Resulting histograms are illustrated and show considerable improvements over those for previously recommended slope transformations (sine, square root of sine, and logarithm of tangent). Unlike previous approaches, the proposed method evaluates the frequency distribution of slope gradient values in a given area and applies the most appropriate transform if required. Sensitivity of the arctangent transformation is tested, showing that Gaussian-kurtosis transformations are acceptable also in terms of histogram shape. Cube root transformations of curvatures produced bimodal histograms. The transforms are applicable to morphometric variables and many others with skewed or long-tailed distributions. By avoiding long tails and outliers, they permit parametric statistics such as correlation, regression and principal component analyses to be applied, with greater confidence that requirements for linearity, additivity and even scatter of residuals (constancy of error variance) are likely to be met. It is suggested that such transformations should be routinely applied in all parametric analyses of long-tailed variables. Our Box-Cox and curvature automated transformations are based on a Python script, implemented as an easy-to-use script tool in ArcGIS.

  8. Probability- and curve-based fractal reconstruction on 2D DEM terrain profile

    International Nuclear Information System (INIS)

    Lai, F.-J.; Huang, Y.M.

    2009-01-01

    Data compression and reconstruction has been playing important roles in information science and engineering. As part of them, image compression and reconstruction that mainly deal with image data set reduction for storage or transmission and data set restoration with least loss is still a topic deserved a great deal of works to focus on. In this paper we propose a new scheme in comparison with the well-known Improved Douglas-Peucker (IDP) method to extract characteristic or feature points of two-dimensional digital elevation model (2D DEM) terrain profile to compress data set. As for reconstruction in use of fractal interpolation, we propose a probability-based method to speed up the fractal interpolation execution to a rate as high as triple or even ninefold of the regular. In addition, a curve-based method is proposed in the study to determine the vertical scaling factor that much affects the generation of the interpolated data points to significantly improve the reconstruction performance. Finally, an evaluation is made to show the advantage of employing the proposed new method to extract characteristic points associated with our novel fractal interpolation scheme.

  9. Biomass utilisation seen against the background of AGENDA 21; Biomassenutzung vor dem Hintergrund der AGENDA 21

    Energy Technology Data Exchange (ETDEWEB)

    Schoenwiesner-Bozkurt, C. [efreso AG, Muenchen (Germany)

    2000-07-01

    From 3 to 14 June 1992 Rio de Janeiro was host to the largest conference that had ever taken place up to that point in human history, the United Nations Conference on Environment and Development (UNCED). One major programmatic outcome of the conference was the approval of Agenda 21. This document was signed by 179 states, but it is not binding under international law. Altogether AGENDA 21 comprises 40 chapters. The present paper draws on a selection of these chapters to exemplify the significance of energy production from biomass and its relationship with the goals of Agenda 21. The author has refrained from discussing the issue of climate and energy policy in a wider context, as this matter will undoubtedly already be known to the reader. [German] Zwischen dem 03. und 14. Juni 1992 fand in Rio die bis dahin groesste Konferenz der Menschheitsgeschichte statt. Die Konferenz der Vereinten Nationen ueber Umwelt und Entwicklung 'United Nations Conference on Environment and Development (UNCED)'. Als greifbares programmatisches Ergebnis der Konferenz wurde am Ende die Agenda 21 verabschiedet. Sie wurde von 179 Staaten unterzeichnet, ist aber voelkerrechtlich nicht verbindlich. Insgesamt umfasst die Agenda 21 40 Einzelkapitel. Beispielhaft soll anhand einiger Kapitel die Bedeutung und der Zusammenhang zwischen der energetischen Nutzung der Biomasse und den Zielen der Agenda 21 aufgezeigt werden. Bewusst wird hierbei der Themenbereich 'Klima- und Energiepolitik' nicht weiter betrachtet, da dieser Zusammenhang den Teilnehmern sicherlich bekannt ist. (orig.)

  10. Methodological application so as to obtain digital elevation models DEM in wetland areas

    International Nuclear Information System (INIS)

    Quintero, Deiby A; Montoya V, Diana M; Betancur, Teresita

    2009-01-01

    In order to understand hydrological systems and the description of flow processes that occur among its components it is essential to have a physiographic description that morphometric and relief characteristics. When local studies are performed, the basic cartography available, in the best case 1:25,000 scale, tends not to obey the needs required to represent the water dynamics that characterize the interactions between streams, aquifers and lenticular water bodies in flat zones particularly in those where there are wetlands localized in ancient F100D plains of rivers. A lack of financial resources is the principal obstacle to acquiring; information that is current and sufficient for the scale of the project. Geomorphologic conditions of flat relief zones are a good alternative for the construction of the new data. Using the basic cartography available and the new data, it is possible to obtain DEMs that are improved and consistent with the dynamics of surface and groundwater flows in the hydrological system. To accomplish this one must use spatial modeling tools coupled with Geographic Information System - GIS. This article present a methodological application for the region surrounding the catchment of wetland Cienaga Colombia in the Bajo Cauca region of Antioquia.

  11. DEM simulation of undrained behaviour with preshearing history for saturated granular media

    International Nuclear Information System (INIS)

    Gong, Guobin; Zha, Xiaoxiong

    2013-01-01

    This paper presents the results of the three-dimensional (3D) discrete element method (DEM) simulations of undrained axisymmetric/triaxial tests on loose assemblies of polydisperse spheres with and without preshearing history using a periodic cell. Undrained tests are modelled by deforming the samples under constant volume conditions. The simulations show that the preshearing process will not induce initial structural anisotropy, and that the presheared and unpresheared samples follow the same initial stress path along a unique limiting boundary in the q–p space, as observed in the published experimental literature, which was not crossed over by any of the stress paths of the presheared samples. It is also shown that the presheared samples are denser compared with the original unpresheared one, and therefore exhibit higher resistance to (temporary) liquefaction. At the grain scale, such higher resistance is found to be attributed to the evolution of a redundancy factor, a microscopic definition of liquefaction (temporary liquefaction). The Lade instability (peak deviator stress) is found to correspond to a unique mechanical coordination number of 4.5, independent of preshearing history. It is also found that the onset of liquefaction (temporary liquefaction) in terms of the redundancy factor lags behind the onset of macroscopic strain softening in terms of the Lade instability for the presheared and unpresheared samples under undrained conditions. (paper)

  12. Automated Topographic Change Detection via Dem Differencing at Large Scales Using The Arcticdem Database

    Science.gov (United States)

    Candela, S. G.; Howat, I.; Noh, M. J.; Porter, C. C.; Morin, P. J.

    2016-12-01

    In the last decade, high resolution satellite imagery has become an increasingly accessible tool for geoscientists to quantify changes in the Arctic land surface due to geophysical, ecological and anthropomorphic processes. However, the trade off between spatial coverage and spatial-temporal resolution has limited detailed, process-level change detection over large (i.e. continental) scales. The ArcticDEM project utilized over 300,000 Worldview image pairs to produce a nearly 100% coverage elevation model (above 60°N) offering the first polar, high spatial - high resolution (2-8m by region) dataset, often with multiple repeats in areas of particular interest to geo-scientists. A dataset of this size (nearly 250 TB) offers endless new avenues of scientific inquiry, but quickly becomes unmanageable computationally and logistically for the computing resources available to the average scientist. Here we present TopoDiff, a framework for a generalized. automated workflow that requires minimal input from the end user about a study site, and utilizes cloud computing resources to provide a temporally sorted and differenced dataset, ready for geostatistical analysis. This hands-off approach allows the end user to focus on the science, without having to manage thousands of files, or petabytes of data. At the same time, TopoDiff provides a consistent and accurate workflow for image sorting, selection, and co-registration enabling cross-comparisons between research projects.

  13. Hugo Chavez : le renouveau du populisme vénézuélien ?

    Directory of Open Access Journals (Sweden)

    Olivier Folz

    2005-09-01

    Full Text Available Pour aborder la problématique du populisme en tant que phénomène politique, nous avons choisi de nous placer dans une perspective latino-américaine en nous intéressant au cas particulier du Venezuela et de son Président Hugo Chavez. La crise généralisée qui, à partir des années quatre-vingts, s’est abattue sur le pays a mis un terme à quarante années de bipartisme et a considérablement affaibli le modèle de démocratie représentative mis en place par les partis politiques Action Démocratique et Copei. Profitant de ce vide, de nouveaux acteurs politiques, indépendants des partis traditionnels, émergèrent dans le panorama politique vénézuélien et parmi eux Hugo Chavez. Ex-putschiste et leader incontesté des secteurs défavorisés, il construisit sa victoire aux élections présidentielles de 1998 en s’appuyant sur un discours virulent envers les partis et l’ancienne classe politique. Grâce à cette technique, Chavez sut capter l’attention des laissés-pour-compte et des déçus du système en s’imposant comme le candidat de la rupture, du changement en faveur d’une démocratie participative et du retour à l’âge d’or, inspiré de Bolivar, jugé plus à même de conduire le Venezuela vers un avenir meilleur.Afin d’appréhender les principales caractéristiques de ce leader charismatique, dans un premier temps, après une brève étude du populisme vénézuélien des années cinquante, nous nous concentrerons sur le personnage, puis, à travers ses déclarations et ses écrits, nous examinerons le diagnostic qu’il porte sur la crise que traverse le Venezuela, la nature de son programme électoral et, enfin, son rapport au peuple. Grâce à ces différents axes de recherches et à leur analyse, nous verrons si Hugo Chavez est ou non un leader populiste.Con el propósito de abordar la problemática del populismo como fenómeno político, hemos decidido ubicarnos en una perspectiva latinoamericana interes

  14. Dementia Population Risk Tool (DemPoRT): study protocol for a predictive algorithm assessing dementia risk in the community

    OpenAIRE

    Fisher, Stacey; Hsu, Amy; Mojaverian, Nassim; Taljaard, Monica; Huyer, Gregory; Manuel, Douglas G; Tanuseputro, Peter

    2017-01-01

    Introduction The burden of disease from dementia is a growing global concern as incidence increases dramatically with age, and average life expectancy has been increasing around the world. Planning for an ageing population requires reliable projections of dementia prevalence; however, existing population projections are simple and have poor predictive accuracy. The Dementia Population Risk Tool (DemPoRT) will predict incidence of dementia in the population setting using multivariable modellin...

  15. GIS-based debris flow source and runout susceptibility assessment from DEM data – a case study in NW Nicaragua

    Directory of Open Access Journals (Sweden)

    J. M. Vilaplana

    2007-11-01

    Full Text Available In October 1998, Hurricane Mitch triggered numerous landslides (mainly debris flows in Honduras and Nicaragua, resulting in a high death toll and in considerable damage to property. The potential application of relatively simple and affordable spatial prediction models for landslide hazard mapping in developing countries was studied. Our attention was focused on a region in NW Nicaragua, one of the most severely hit places during the Mitch event. A landslide map was obtained at 1:10 000 scale in a Geographic Information System (GIS environment from the interpretation of aerial photographs and detailed field work. In this map the terrain failure zones were distinguished from the areas within the reach of the mobilized materials. A Digital Elevation Model (DEM with 20 m×20 m of pixel size was also employed in the study area. A comparative analysis of the terrain failures caused by Hurricane Mitch and a selection of 4 terrain factors extracted from the DEM which, contributed to the terrain instability, was carried out. Land propensity to failure was determined with the aid of a bivariate analysis and GIS tools in a terrain failure susceptibility map. In order to estimate the areas that could be affected by the path or deposition of the mobilized materials, we considered the fact that under intense rainfall events debris flows tend to travel long distances following the maximum slope and merging with the drainage network. Using the TauDEM extension for ArcGIS software we generated automatically flow lines following the maximum slope in the DEM starting from the areas prone to failure in the terrain failure susceptibility map. The areas crossed by the flow lines from each terrain failure susceptibility class correspond to the runout susceptibility classes represented in a runout susceptibility map. The study of terrain failure and runout susceptibility enabled us to obtain a spatial prediction for landslides, which could contribute to landslide risk

  16. Uso de espectrometria de massas em medidas eletroquímicas - a técnica de DEMS

    Directory of Open Access Journals (Sweden)

    Souza José Pio I. de

    2000-01-01

    Full Text Available The combination of cyclic voltammetry and on line mass spectrometry, called differential electrochemical mass spectrometry (DEMS, is already a well established method for on line identification and quantitative detection of the products and intermediates of electrochemical reactions. This article aims to show the principles of the method and how this technique have been used to study electrochemical problems such the electrocatalytic oxidation of organic molecules, as methanol and ethanol, at noble metal electrodes.

  17. Precise Determination of the Baseline Between the TerraSAR-X and TanDEM-X Satellites

    Science.gov (United States)

    Koenig, Rolf; Rothacher, Markus; Michalak, Grzegorz; Moon, Yongjin

    TerraSAR-X, launched on June 15, 2007, and TanDEM-X, to be launched in September 2009, both carry the Tracking, Occultation and Ranging (TOR) category A payload instrument package. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), for precise orbit determination and atmospheric sounding and a Laser retro-reflector (LRR) serving as target for the global Satellite Laser Ranging (SLR) ground station network. The TOR is supplied by the GeoForschungsZentrum Potsdam (GFZ) Germany, and the Center for Space Research (CSR), Austin, Texas. The objective of the German/US collaboration is twofold: provision of atmospheric profiles for use in numerical weather predictions and climate studies from the occultation data and precision SAR data processing based on precise orbits and atmospheric products. For the scientific objectives of the TanDEM- X mission, i.e., bi-static SAR together with TerraSAR-X, the dual-frequency GPS receiver is of vital importance for the millimeter level determination of the baseline or distance between the two spacecrafts. The paper discusses the feasibility of generating millimeter baselines by the example of GRACE, where for validation the distance between the two GRACE satellites is directly available from the micrometer-level intersatellite link measurements. The distance of the GRACE satellites is some 200 km, the distance of the TerraSAR-X/TanDEM-X formation will be some 200 meters. Therefore the proposed approach is then subject to a simulation of the foreseen TerraSAR-X/TanDEM-X formation. The effect of varying space environmental conditions, of possible phase center variations, multi path, and of varying center of mass of the spacecrafts are evaluated and discussed.

  18. To the question on accuracy of forest heights’ measurements by the TanDEM-X radar interferometry data

    Directory of Open Access Journals (Sweden)

    T. N. Chimitdorzhiev

    2016-08-01

    Full Text Available The paper presents the validation results of the InSAR method for determining the forest canopy height, based on TanDEM-X and ALOS PALSAR data. The research conducted on the territory of the Baikal-Kudara forest area of the Republic of Buryatia (52°10'N, 106°48'E. Forest vegetation is represented mainly by conifers – pine, and spruce, with a small admixture of deciduous trees – aspen, birch, etc. The forest vegetation height was determined by subtracting the digital elevation model (DEM of the digital terrain model (DTM. DEM is built according to the L-band (wavelength of 23.5 cm ALOS PALSAR satellite with horizontal co-polarization mode. In the investigation it was assumed that a radar signal of ALOS PALSAR passes all forest thickness and reflected from the underlying surface, made it possible to recover terrain under forest canopy. DTM has been built using the TanDEM-X data (wavelength 3 cm. In this case, it was assumed that the radar echoes scattered from a some virtual phase centers of scattering surface, which characterizes the upper limit of the continuous forest canopy. To check the accuracy of satellite definitions of forest height in study area were made high-precision geodetic measurement of trees heights using electronic total station and the coordinates of geographic control points using differential GPS receivers. The discrepancy between the satellite and ground-based measurements at 11 test sites did not exceed 2 m, which is mainly due to the difference in measurement techniques: height of individual trees by ground methods and continuous forest canopy height using radar interferometry.

  19. Extraction of multi-scale landslide morphological features based on local Gi* using airborne LiDAR-derived DEM

    Science.gov (United States)

    Shi, Wenzhong; Deng, Susu; Xu, Wenbing

    2018-02-01

    For automatic landslide detection, landslide morphological features should be quantitatively expressed and extracted. High-resolution Digital Elevation Models (DEMs) derived from airborne Light Detection and Ranging (LiDAR) data allow fine-scale morphological features to be extracted, but noise in DEMs influences morphological feature extraction, and the multi-scale nature of landslide features should be considered. This paper proposes a method to extract landslide morphological features characterized by homogeneous spatial patterns. Both profile and tangential curvature are utilized to quantify land surface morphology, and a local Gi* statistic is calculated for each cell to identify significant patterns of clustering of similar morphometric values. The method was tested on both synthetic surfaces simulating natural terrain and airborne LiDAR data acquired over an area dominated by shallow debris slides and flows. The test results of the synthetic data indicate that the concave and convex morphologies of the simulated terrain features at different scales and distinctness could be recognized using the proposed method, even when random noise was added to the synthetic data. In the test area, cells with large local Gi* values were extracted at a specified significance level from the profile and the tangential curvature image generated from the LiDAR-derived 1-m DEM. The morphologies of landslide main scarps, source areas and trails were clearly indicated, and the morphological features were represented by clusters of extracted cells. A comparison with the morphological feature extraction method based on curvature thresholds proved the proposed method's robustness to DEM noise. When verified against a landslide inventory, the morphological features of almost all recent (historical (> 10 years) landslides were extracted. This finding indicates that the proposed method can facilitate landslide detection, although the cell clusters extracted from curvature images should

  20. La revista Demófilo y la antropología cultural en Andalucía

    Directory of Open Access Journals (Sweden)

    Rodríguez Becerra, Salvador

    2002-06-01

    Full Text Available Published since 1987 by the Machado Foundation, of Seville, Demófilo represents the resumption of scientific folklore studies in the late 19th century championed by Antonio Machado y Álvarez and published in the journal El Folk-lore Andaluz. The basic objectives of Demófilo are «to rescue, analyze and divulge Andalousia's traditional culture.» The journal is oriented toward high schools, colleges and universities in Andalousia as well as any institution interested in the traditional culture of the area, such as museums and organizations supporting Andalousia's cultural heritage. The authors also include in this article a summary of the journal's monographic issues published to date.

    Publicación de la Fundación Machado, de Sevilla, y nacida en 1987, Demófilo enlaza con su predecesora en el siglo XIX, El Folk-lore Andaluz, del movimiento sevillano de estudio científico del folklore que animara sobre todo Antonio Machado y Álvarez. Demófilo tiene como objetivos básicos «rescatar, analizar y difundir la cultura tradicional andaluza» y va dirigida especialmente a centros de enseñanza media y universidades de Andalucía, así como a instituciones interesadas en la cultura tradicional de la región, como museos y asociaciones de defensa del patrimonio cultural. Los autores incluyen también en este artículo un resumen de los números monográficos de la revista publicados hasta la fecha.