WorldWideScience

Sample records for workshop working group

  1. INMM Physical Protection Technical Working Group Workshops

    International Nuclear Information System (INIS)

    Williams, J.D.

    1982-01-01

    The Institute of Nuclear Materials Management (INMM) established the Physical Protection Technical Working Group to be a focal point for INMM activities related to the physical protection of nuclear materials and facilities. The Technical Working Group has sponsored workshops with major emphasis on intrusion detection systems, entry control systems, and security personnel training. The format for these workshops has consisted of a series of small informal group discussions on specific subject matter which allows direct participation by the attendees and the exchange of ideas, experiences, and insights. This paper will introduce the reader to the activities of the Physical Protection Technical Working Group, to identify the workshops which have been held, and to serve as an introduction to the following three papers of this session

  2. Switched power workshop power supply working group

    International Nuclear Information System (INIS)

    Haseroth, H.; Hopkins, D.; Ikezi, H.; Kirbie, H.; Lincke, E.; Wilson, M.

    1988-01-01

    The power supply working group was assigned the problem of pulse charging the 3-MeV gun. The gun is a radial line structure that has two charging configurations: a single ring charged to 500 kV or nine rings charged from 100 to 200 kV. In either configuration, the pulsed source must rapidly charge the structure's ring(s) before breakdown can begin. The issues encountered in charging the structure can be divided into two categories. First, the charging system must be well matched to the gun structure. Proper impedance matching will avoid reflections and limit the fault current if the ring should spark. Second, several systems can achieve the wide range of charge voltages necessary. Some are better suited to high voltages, while others are better at low voltages. The following paragraphs will address the impedance matching issues are review three choices for pulse generators. A system for each type of source is described along with a very rough cost estimate. 1 ref., 4 figs., 2 tabs

  3. Switched power workshop: Power supply working group

    International Nuclear Information System (INIS)

    Haseroth, H.; Hopkins, D.; Ikezi, H.; Kirbie, H.C.; Lincke, E.; Wilson, M.

    1989-01-01

    The power supply working group was assigned the problem of pulse charging the 3-MeV gun. The gun is a radial line structure that has two charging configurations: a single ring charged to 500 kV or nine rings charged from 100 to 200 kV. In either configuration, the pulsed source must rapidly charge the structure's ring(s) before breakdown can begin. The issues encountered in charging the structure can be divided into two categories. First, the charging system must be well matched to the gun structure. Proper impedance matching will avoid reflections and limit the fault current if the ring should spark. Second, several systems can achieve the wide range of charge voltages necessary. Some are better suited to high voltages, while others are better at low voltages. The following paragraphs will address the impedance matching issues and review three choices for pulse generators. A system for each type of source is described along with a very rough cost estimate. 1 ref., 4 figs., 2 tabs

  4. Combustion Dynamics Facility: April 1990 workshop working group reports

    Energy Technology Data Exchange (ETDEWEB)

    Kung, A.H.; Lee, Y.T.

    1990-04-01

    This document summarizes results from a workshop held April 5--7, 1990, on the proposed Combustion Dynamics Facility (CDF). The workshop was hosted by the Lawrence Berkeley Laboratory (LBL) and Sandia National Laboratories (SNL) to provide an opportunity for potential users to learn about the proposed experimental and computational facilities, to discuss the science that could be conducted with such facilities, and to offer suggestions as to how the specifications and design of the proposed facilities might be further refined to address the most visionary scientific opportunities. Some 130 chemical physicists, combustion chemists, and specialists in UV synchrotron radiation sources and free-electron lasers (more than half of whom were from institutions other than LBL and SNL) attended the five plenary sessions and participated in one or more of the nine parallel working group sessions. Seven of these sessions were devoted to broadening and strengthening the scope of CDF scientific opportunities and to detail the experimental facilities required to realize these opportunities. Two technical working group sessions addressed the design and proposed performance of two of the major CDF experimental facilities. These working groups and their chairpersons are listed below. A full listing of the attendees of the workshop is given in Appendix A. 1 tab.

  5. Results of the 2015 Relationship Testing Workshop of the English Speaking Working Group

    DEFF Research Database (Denmark)

    Friis, Susanne Lunøe; Hallenberg, Charlotte; Simonsen, Bo Thisted

    2015-01-01

    Annually, members of the English Speaking Working Group of the International Society for Forensic Genetics are invited to participate in a Relationship Testing Workshop. In 2015, 64 laboratories participated. Here, we present the results from the 2015 workshop, which included relationship testing...

  6. Working Group summary reports from the Advanced Photon Source reliability workshop

    International Nuclear Information System (INIS)

    1992-05-01

    A workshop was held at APS to address reliability goals for accelerator systems. Seventy-one individuals participated in the workshop, including 30 from other institutions. The goals of the workshop were to: (1) Give attendees an introduction to the basic concepts of reliability analysis. (2) Exchange information on operating experience at existing accelerator facilities and strategies for achieving reliability at facilities under design or in construction. (3) Discuss reliability goals for APS and the means of their achievement. This report contains the working group summary report an APS's following systems: RF Systems; Power Supplies; Magnet Systems; Interlock and Diagnostics; and Vacuum Systems

  7. Summy of the working groupI of the care HHH LUMI-2005 workshop

    CERN Document Server

    Brüning, Oliver Sim

    2006-01-01

    The working group I of the LUMI-2005 workshop was asked to put together a catalogue of basic design options for the IR solutions for an LHC-upgrade. The goal of the working group was to discuss the different solutions with respect to the maximum beta-functions inside the first focusing quadrupole magnets and the resulting required quadrupole apertures the chromatic aberrations on the one hand and the implications for the magnet technology on the other hand. Such a comparison requires a wide range of input data ranging from the expected loss patterns at the magnetic elements and the resulting peak and average heat deposition to the obtainable peak magnetic field and quench limits for different magnet design options and the correct ability of the chromatic aberrations for a given optics design. Given the wide spectrum of relevant input data the working group could not yet prepare a final ranking of the various design options. Rather the working group succeeded in fixing some of the key boundary conditions in or...

  8. Fourth natural analogue working group meeting and Pocos de Caldas project final workshop

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.A.

    1991-01-01

    The fourth meeting of the CEC-sponsored natural analogue working group (NAWG) was held in Pitlochry, Scotland, from 18 to 22 June 1990, and also included the final workshop of the Pocos de Caldas (Brazil) natural analogue project, sponsored by Nagra (CH), SKB (S) UK-DOE and US-DOE. About 80 specialists attended this meeting, originating from EC Member States and also Australia, Brazil, Canada, Finland, Japan, Sweden, Switzerland and the USA. The IAEA and OCDE-NEA were also represented. This plenary meeting was the opportunity to review and discuss five years of progress and activities of natural analogues in central areas of performance assessment: waste forms and engineered barriers, geochemistry and radionuclide speciation, radionuclide migration and the overall geological context of radwaste disposal. In addition, a feedback session provided the opportunity for regulators and those individuals who had advisory roles to give their views and impressions on the significance of natural analogue research. These proceedings, divided into two sessions, contain 32 technical papers and 14 abstracts of published papers

  9. Results of the 2007 Paternity Testing Workshop of the English Speaking Working Group of the International Society for Forensic Genetics

    DEFF Research Database (Denmark)

    Hallenberg, C.; Langkjær, Rikke B.; Jensen, Peter Bjødstrup

    2008-01-01

    We present the results of the 2007 Paternity Testing Workshop of the English Speaking Working Group of the International Society for Forensic Genetics. The exercise included paternity testing of blood samples from a mother, a child and an alleged father. The laboratories were encouraged to answer...

  10. Results of the 2009 Paternity Testing Workshop of the English Speaking Working Group of the International Society for Forensic Genetics

    DEFF Research Database (Denmark)

    Friis, Susanne Lunøe; Hallenberg, Charlotte; Simonsen, Bo Thisted

    2009-01-01

    Here we present the results of the 2009 Paternity Testing Workshop of the English Speaking Working Group of the International Society for Forensic Genetics. The exercise included paternity testing of blood samples from a mother, a child and two alleged fathers. The laboratories were encouraged...

  11. Considerations on photochemical genotoxicity. II: Report of the 2009 International Workshop on Genotoxicity Testing Working Group

    NARCIS (Netherlands)

    Lynch, A.M.; Guzzie, P.J.; Bauer, D.; Gocke, E.; Itoh, S.; Jacobs, A.; Krul, C.A.M.; Schepky, A.; Tanaka, N.; Kasper, P.

    2011-01-01

    A workshop to reappraise the previous IWGT recommendations for photogenotoxicity testing [E. Gocke, L. Muller, P.J. Guzzie, S. Brendler-Schwaab, S. Bulera, C.F. Chignell, L.M. Henderson, A. Jacobs, H. Murli, R.D. Snyder, N. Tanaka, Considerations on photochemical genotoxicity: report of the

  12. U.S. - GERMAN BILATERAL WORKING GROUP WORKSHOP ON: ECONOMIC TOOLS FOR SUSTAINABLE BROWNFIELDS REDEVELOPMENT

    Science.gov (United States)

    This CD-ROM contains information from a two-day workshop discussing innovative brownfields financing and economic strategies in the United States and Germany. A special emphasis was given to the identification of advantages and disadvantages of different financial tools, economi...

  13. Working Group 7 Summary

    Energy Technology Data Exchange (ETDEWEB)

    Nagaitsev S.; Berg J.

    2012-06-10

    The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

  14. Summary of the IEA workshop/working group meeting on ferritic/martensitic steels for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Klueh, R.L. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    An International Energy Agency (IEA) Working Group on Ferritic/Martensitic Steels for Fusion Applications, consisting of researchers from Japan, the European Union, the United States, and Switzerland, met at the headquarters of the Joint European Torus (JET), Culham, United Kingdom, 24-25 October 1996. At the meeting preliminary data generated on the large heats of steel purchased for the IEA program and on other heats of steels were presented and discussed. The second purpose of the meeting was to continue planning and coordinating the collaborative test program in progress on reduced-activation ferritic/martensitic steels. The next meeting will be held in conjunction with the International Conference on Fusion Reactor Materials (ICFRM-8) in Sendai, Japan, 23-31 October 1997.

  15. Summary of the IEA workshop/working group meeting on ferritic/martensitic steels for fusion

    International Nuclear Information System (INIS)

    Klueh, R.L.

    1997-01-01

    An International Energy Agency (IEA) Working Group on Ferritic/Martensitic Steels for Fusion Applications, consisting of researchers from Japan, the European Union, the United States, and Switzerland, met at the headquarters of the Joint European Torus (JET), Culham, United Kingdom, 24-25 October 1996. At the meeting preliminary data generated on the large heats of steel purchased for the IEA program and on other heats of steels were presented and discussed. The second purpose of the meeting was to continue planning and coordinating the collaborative test program in progress on reduced-activation ferritic/martensitic steels. The next meeting will be held in conjunction with the International Conference on Fusion Reactor Materials (ICFRM-8) in Sendai, Japan, 23-31 October 1997

  16. Data And Informatics Working Group On Virtual Data Integration Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, D. N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Palanisamy, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dam, K. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-13

    This report is the outcome of a workshop that was commissioned by the Department of Energy’s Climate and Environmental Sciences Division (CESD) to examine current and future data infrastructure requirements that would be foundational to achieving CESD’s scientific mission goals. Over the past several years, data volumes in CESD disciplines have risen sharply to unprecedented levels (tens of petabytes). So too has the complexity and diversity of the research data (simulation, observation, and reanalysis) needing to be captured, stored, verified, analyzed, and integrated. With the trends of increased data volume (in the hundreds of petabytes), more complex analysis processes, and growing crossdisciplinary collaborations, it is timely to investigate whether the CESD community has the right computational and data support to realize the full scientific potential from its data collections. In recognition of the challenges, a partnership is forming across CESD and with national and international agencies to investigate the viability of creating an integrated, collaborative data infrastructure: a virtual laboratory. The overarching goal of this report is to identify the community’s key data technology requirements and high-priority development needs for sustaining and growing their scientific discovery potential. The report also aims to map these requirements to existing solutions and to identify gaps in current services, tools, and infrastructure that will need to be addressed in the short, medium, and long term so as not to impede scientific progress

  17. Computational methods working group

    International Nuclear Information System (INIS)

    Gabriel, T.A.

    1997-09-01

    During the Cold Moderator Workshop several working groups were established including one to discuss calculational methods. The charge for this working group was to identify problems in theory, data, program execution, etc., and to suggest solutions considering both deterministic and stochastic methods including acceleration procedures.

  18. Summary of the NICHD-BPCA Pediatric Formulation Initiatives Workshop-Pediatric Biopharmaceutics Classification System (PBCS) Working Group

    Science.gov (United States)

    Abdel-Rahman, Susan; Amidon, Gordon L.; Kaul, Ajay; Lukacova, Viera; Vinks, Alexander A.; Knipp, Gregory

    2012-01-01

    The Biopharmaceutics Classification System (BCS) allows compounds to be classified based on their in vitro solubility and intestinal permeability. The BCS has found widespread use in the pharmaceutical community as an enabling guide for the rational selection of compounds, formulation for clinical advancement and generic biowaivers. The Pediatric Biopharmaceutics Classification System (PBCS) working group was convened to consider the possibility of developing an analogous pediatric based classification system. Since there are distinct developmental differences that can alter intestinal contents, volumes, permeability and potentially biorelevant solubilities at the different ages, the PBCS working group focused on identifying age specific issues that would need to be considered in establishing a flexible, yet rigorous PBCS. Objective To summarize the findings of the PBCS working group and provide insights into considerations required for the development of a pediatric based biopharmaceutics classification system. Methods Through several meetings conducted both at The Eunice Kennedy Shriver National Institute of Child Health, Human Development (NICHD)-US Pediatric Formulation Initiative (PFI) workshop (November 2011) and via teleconferences, the PBCS working group considered several high level questions that were raised to frame the classification system. In addition, the PBCS working group identified a number of knowledge gaps that would need to be addressed in order to develop a rigorous PBCS. Results It was determined that for a PBCS to be truly meaningful, it would need to be broken down into several different age groups that would account for developmental changes in intestinal permeability, luminal contents, and gastrointestinal transit. Several critical knowledge gaps where identified including: 1) a lack of fully understanding the ontogeny of drug metabolizing enzymes and transporters along the gastrointestinal (GI) tract, in the liver and in the kidney; 2

  19. A report of the 2002-2008 paternity testing workshops of the English speaking working group of the International Society for Forensic Genetics

    DEFF Research Database (Denmark)

    Thomsen, Anni Rønfeldt; Hallenberg, Charlotte; Simonsen, Bo Thisted

    2009-01-01

    The English Speaking Working Group (ESWG) of the International Society for Forensic Genetics (ISFG) offers an annual Paternity Testing Workshop open to all members of the group. Blood samples, a questionnaire and a paper challenge are sent to the participants. Here, we present the results...

  20. A report of the 2000 and 2001 paternity testing workshops of the English speaking working group of the international society for forensic genetics

    DEFF Research Database (Denmark)

    Hallenberg, Charlotte; Morling, Niels

    2002-01-01

    During the last 10 years, the English Speaking Working Group (ESWG) of the International Society for Forensic Genetics (ISFG) has once a year arranged a Paternity Testing Workshop in which blood samples as well as a questionnaire concerning laboratory strategies were distributed to the participat......During the last 10 years, the English Speaking Working Group (ESWG) of the International Society for Forensic Genetics (ISFG) has once a year arranged a Paternity Testing Workshop in which blood samples as well as a questionnaire concerning laboratory strategies were distributed...

  1. Group Work

    Science.gov (United States)

    Wilson, Kristy J.; Brickman, Peggy; Brame, Cynthia J.

    2018-01-01

    Science, technology, engineering, and mathematics faculty are increasingly incorporating both formal and informal group work in their courses. Implementing group work can be improved by an understanding of the extensive body of educational research studies on this topic. This essay describes an online, evidence-based teaching guide published by…

  2. A report of the 1997, 1998 and 1999 Paternity Testing Workshops of the English Speaking Working Group of the International Society for Forensic Genetics

    DEFF Research Database (Denmark)

    Hallenberg, C; Morling, N

    2001-01-01

    We present the results of the 1997, 1998 and 1999 Paternity Testing Workshops of the English Speaking Working Group of the International Society for Forensic Genetics. The numbers of participating laboratories were 24 (1997), 31 (1998) and 32 (1999). In 1997, all laboratories drew the correct...

  3. Parton Distributions Working Group

    International Nuclear Information System (INIS)

    Barbaro, L. de; Keller, S. A.; Kuhlmann, S.; Schellman, H.; Tung, W.-K.

    2000-01-01

    This report summarizes the activities of the Parton Distributions Working Group of the QCD and Weak Boson Physics workshop held in preparation for Run II at the Fermilab Tevatron. The main focus of this working group was to investigate the different issues associated with the development of quantitative tools to estimate parton distribution functions uncertainties. In the conclusion, the authors introduce a Manifesto that describes an optimal method for reporting data

  4. A report of the 1995 and 1996 Paternity Testing Workshops of the English Speaking Working Group of the International Society for Forensic Haemogenetics

    DEFF Research Database (Denmark)

    Bjerre, A; Syndercombe-Court, Denise; Lincoln, P

    1997-01-01

    We report the results of the 1995 and 1996 Paternity Testing Workshops of the English Speaking Working Group of the International Society for Forensic Haemogenetics. In 1995, 18 laboratories participated and in 1996, 21 laboratories participated. Each year, blood samples from three persons (child...... of the laboratories performed RFLP typing of VNTR loci using very similar methods. The results and the inter-laboratory variations of the measured lengths of the DNA-fragments of the VNTR regions D2S44, D7S21, D7S22, and D12S11 of the trios were analysed. The overall coefficient of variation was 2.15% in 1995 and 1...

  5. Clinical research in implant dentistry: study design, reporting and outcome measurements: consensus report of Working Group 2 of the VIII European Workshop on Periodontology.

    Science.gov (United States)

    Tonetti, Maurizio; Palmer, Richard

    2012-02-01

    The objective of this working group was to assess and make specific recommendations to improve the quality of reporting of clinical research in implant dentistry and discuss ways to reach a consensus on choice of outcomes. Discussions were informed by three systematic reviews on quality of reporting of observational studies (case series, case-control and cohort) and experimental research (randomized clinical trials). An additional systematic review provided information on choice of outcomes and analytical methods. In addition, an open survey among all workshop participants was utilized to capture a consensus view on the limits of currently used survival and success-based outcomes as well as to identify domains that need to be captured by future outcome systems. The Workshop attempted to clarify the characteristics and the value in dental implant research of different study designs. In most areas, measurable quality improvements over time were identified. The Workshop recognized important aspects that require continued attention by clinical researchers, funding agencies and peer reviewers to decrease potential bias. With regard to choice of outcomes, the limitations of currently used systems were recognized. Three broad outcome domains that need to be captured by future research were identified: (i) patient reported outcome measures, (ii) peri-implant tissue health and (iii) performance of implant supported restorations. Peri-implant tissue health can be measured by marginal bone level changes and soft tissue inflammation and can be incorporated in time to event analyses. The Workshop recommended that collaboration between clinicians and epidemiologists/clinical trials specialists should be encouraged. Aspects of design aimed at limitation of potential bias should receive attention by clinical researchers, funding agencies and journal editors. Adherence to appropriate reporting guidelines such as STROBE and CONSORT are necessary standards. Research on outcome

  6. Report of the Beyond the Standard Model Working Group of the 1999 UK Phenomenology Workshop on Collider Physics (Durham)

    CERN Document Server

    Allanach, Benjamin C; Dedes, A; Djouadi, Abdelhak; Grosse-Knetter, J; Hetherington, J; Heinemeyer, S; Holt, J; Hutchcroft, D E; Kalinowski, Jan; Kane, G; Kartvelishvili, V G; King, S F; Lola, S; McNulty, R; Parker, M A; Patel, G D; Ross, Graham G; Spira, Michael; Teixeira-Dias, P; Weiglein, Georg; Wilson, G; Womersley, J; Walker, P; Webber, Bryan R; Wyatt, T R

    2000-01-01

    The Beyond the Standard Model Working Group discussed a variety of topics relating to exotic searches at current and future colliders, and the phenomenology of current models beyond the Standard Model. For example, various supersymmetric (SUSY) and extra dimensions search possibilities and constraints are presented. Fine-tuning implications of SUSY searches are derived. The implications of Higgs (non)-discovery are discussed, as well as the program HDECAY. The individual contributions are included seperately. Much of the enclosed work is original, although some is reviewed.

  7. Summary of the NICHD-BPCA Pediatric Formulation Initiatives Workshop-Pediatric Biopharmaceutics Classification System (PBCS) Working Group

    OpenAIRE

    Abdel-Rahman, Susan; Amidon, Gordon L.; Kaul, Ajay; Lukacova, Viera; Vinks, Alexander A.; Knipp, Gregory

    2012-01-01

    The Biopharmaceutics Classification System (BCS) allows compounds to be classified based on their in vitro solubility and intestinal permeability. The BCS has found widespread use in the pharmaceutical community as an enabling guide for the rational selection of compounds, formulation for clinical advancement and generic biowaivers. The Pediatric Biopharmaceutics Classification System (PBCS) working group was convened to consider the possibility of developing an analogous pediatric based clas...

  8. Invenio User Group Workshop 2015

    CERN Document Server

    2015-01-01

    The workshop is intended for Invenio administrators and will consist of a series of lectures, practical exercises, and discussions with Invenio developers. The goal is to enable better understanding of Invenio features and capabilities, to discuss specific needs, forthcoming features and developments, etc.

  9. Summary of the National Institute of Child Health and Human Development-best pharmaceuticals for Children Act Pediatric Formulation Initiatives Workshop-Pediatric Biopharmaceutics Classification System Working Group.

    Science.gov (United States)

    Abdel-Rahman, Susan M; Amidon, Gordon L; Kaul, Ajay; Lukacova, Viera; Vinks, Alexander A; Knipp, Gregory T

    2012-11-01

    The Biopharmaceutics Classification System (BCS) allows compounds to be classified based on their in vitro solubility and intestinal permeability. The BCS has found widespread use in the pharmaceutical community to be an enabling guide for the rational selection of compounds, formulation for clinical advancement, and generic biowaivers. The Pediatric Biopharmaceutics Classification System (PBCS) Working Group was convened to consider the possibility of developing an analogous pediatric-based classification system. Because there are distinct developmental differences that can alter intestinal contents, volumes, permeability, and potentially biorelevant solubilities at different ages, the PBCS Working Group focused on identifying age-specific issues that need to be considered in establishing a flexible, yet rigorous PBCS. We summarized the findings of the PBCS Working Group and provided insights into considerations required for the development of a PBCS. Through several meetings conducted both at The Eunice Kennedy Shriver National Institute of Child Health, Human Development-US Pediatric Formulation Initiative Workshop (November 2011) and via teleconferences, the PBCS Working Group considered several high-level questions that were raised to frame the classification system. In addition, the PBCS Working Group identified a number of knowledge gaps that need to be addressed to develop a rigorous PBCS. It was determined that for a PBCS to be truly meaningful, it needs to be broken down into several different age groups that account for developmental changes in intestinal permeability, luminal contents, and gastrointestinal (GI) transit. Several critical knowledge gaps were identified, including (1) a lack of fully understanding the ontogeny of drug metabolizing enzymes and transporters along the GI tract, in the liver, and in the kidney; (2) an incomplete understanding of age-based changes in the GI, liver, and kidney physiology; (3) a clear need to better understand

  10. Hunton Group core workshop and field trip

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.S. [ed.

    1993-12-31

    The Late Ordovician-Silurian-Devonian Hunton Group is a moderately thick sequence of shallow-marine carbonates deposited on the south edge of the North American craton. This rock unit is a major target for petroleum exploration and reservoir development in the southern Midcontinent. The workshop described here was held to display cores, outcrop samples, and other reservoir-characterization studies of the Hunton Group and equivalent strata throughout the region. A field trip was organized to complement the workshop by allowing examination of excellent outcrops of the Hunton Group of the Arbuckle Mountains.

  11. Genomics:GTL Contractor-Grantee Workshop IV and Metabolic Engineering Working Group Inter-Agency Conference on Metabolic Engineering 2006

    Energy Technology Data Exchange (ETDEWEB)

    Mansfield, Betty Kay [ORNL; Martin, Sheryl A [ORNL

    2006-02-01

    Welcome to the 2006 joint meeting of the fourth Genomics:GTL Contractor-Grantee Workshop and the six Metabolic Engineering Working Group Inter-Agency Conference. The vision and scope of the Genomics:GTL program continue to expand and encompass research and technology issues from diverse scientific disciplines, attracting broad interest and support from researchers at universities, DOE national laboratories, and industry. Metabolic engineering's vision is the targeted and purposeful alteration of metabolic pathways to improve the understanding and use of cellular pathways for chemical transformation, energy transduction, and supramolecular assembly. These two programs have much complementarity in both vision and technological approaches, as reflected in this joint workshop. GLT's challenge to the scientific community remains the further development and use of a broad array of innovative technologies and computational tools to systematically leverage the knowledge and capabilities brought to us by DNA sequencing projects. The goal is to seek a broad and predictive understanding of the functioning and control of complex systems--individual microbes, microbial communities, and plants. GTL's prominent position at the interface of the physical, computational, and biological sciences is both a strength and challenge. Microbes remain GTL's principal biological focus. In the complex 'simplicity' of microbes, they find capabilities needed by DOE and the nation for clean and secure energy, cleanup of environmental contamination, and sequestration of atmospheric carbon dioxide that contributes to global warming. An ongoing challenge for the entire GTL community is to demonstrate that the fundamental science conducted in each of your research projects brings us a step closer to biology-based solutions for these important national energy and environmental needs.

  12. Business working group

    International Nuclear Information System (INIS)

    Doroshuk, B.W.

    2000-01-01

    The workshop of 26-27 june 2000, on nuclear power Plant LIfe Management (PLIM), also included working groups in which major issues facing PLIM activities for nuclear power plants were identified and discussed. The third group was on Business. The discussion concerned the following points: There are concerns about retaining experienced/trained personnel, and maintaining a good working relationship among them, as well as about the closure of research facilities, the reduction in staff numbers under increasing economic pressure and the lack of new nuclear power plant constructions. The marginal cost of producing electricity is lower for most existing nuclear power plants than for almost all other energy sources. Refurbishment costs are usually relatively small compared with new investments. The ongoing regulatory reform of the electricity market will bring increasing competition. Although PLIM has been carried out in many countries with favourable results, there are still uncertainties which affect business decisions regarding financial and market risks in PLIM activities. Recommendations were made. (author)

  13. Proceedings of 1991-workshops of the working group on 'Development and application of facilities for low temperature irradiation as well as controlled irradiation'

    International Nuclear Information System (INIS)

    Kuramoto, Eiichi; Okada, Moritami

    1992-09-01

    This is the proceedings of 1991-workshops of the working group on 'Development and Application of Facilities for Low Temperature Irradiation as well as Controlled Irradiation' held at the Research Reactor Institute of Kyoto University on July 25, 1991 and on February 28, 1992. In the present proceedings, it is emphasized that the study of radiation damages in various materials must be performed under carefully controlled irradiation conditions (irradiation temperature, neutron spectrum and so forth) during reactor irradiations. Especially, it is pointed out that a middle scale reactor such as KUR is suitable for the precise control of neutron spectra. Several remarkable results, which are made through experiments using the Low Temperature Irradiation Facility in KUR (KUR-LTL), are reported. Also, possible advanced research programs are discussed including the worldwide topics on the radiation damages in metals, semi-conductors and also insulators. Further, the present status of KUR-LTL is reported and the advanced plan of the facility is proposed. (author)

  14. IAEA INTOR workshop report, group 8

    International Nuclear Information System (INIS)

    Tamura, Sanae; Shimada, Ryuichi; Miya, Naoyuki; Shinya, Kichiro; Kishimoto, Hiroshi

    1979-10-01

    This report provides material for discussion in Group 8, Power Supply and Transfer, of the IAEA Workshop on INTOR. A new system for the poloidal field power supply for INTOR is proposed and its overall system design is described. The results of simulation calculation of the system are also given. (author)

  15. Snowmass Fusion Summer Study Group workshop

    International Nuclear Information System (INIS)

    Clement, S.

    1999-01-01

    The Snowmass Fusion Summer Study Group workshop, has taken place at Snowmass, Colorado, 11-23 July 1999. Its purpose was to discuss opportunities and directions in fusion energy science for the next decade. About 300 experts from all fields in the magnetic and inertial fusion communities attended, coming mostly from the US, but with some foreign participation

  16. Enhancing the contribution and role of practitioner knowledge in the Intergovernmental Panel on Climate Change (IPCC Working Group (WG II process: Insights from UK workshops

    Directory of Open Access Journals (Sweden)

    Candice Howarth

    2017-01-01

    Full Text Available This perspective critically assesses how the Intergovernmental Panel on Climate Change (IPCC could facilitate a closer alignment of its activities and include lessons drawn from the policy and decision-making communities working on the ground at the regional/local levels. The objective is to facilitate practitioner input into the detailed choice of topics and priorities for IPCC review and in the conclusions drawn (we define practitioners as those engaged in the development and application of practical responses to climate change on the ground. By means of a series of workshops with academics, policy officials and decision-makers in the United Kingdom, the research reported here illuminates how the IPCC’s Working Group II (WGII has been used in the past to inform decision-making and how practitioner responses to climate change could better inform the IPCC process in the future. In particular, we recommend three key actions. Firstly that IPCC WGII should incorporate more practitioners as authors to improve the awareness and understanding amongst the writing teams of the nature and detail of decisions being made in response to climate change; secondly a practitioner-led IPCC Special Report should be commissioned on good-practice responses to climate change; and thirdly a new body should be created, attached to the IPCC, to synthesise and report on good practice on climate response strategies in a timely manner. By adopting these recommendations, the IPCC could become more directly useful to decision-makers working on adaptation at the national, regional and local levels and enable more actionable decision-making.

  17. Technology working group

    International Nuclear Information System (INIS)

    Tsujikura, Y.

    2000-01-01

    The workshop of 26-27 june 2000, on nuclear power Plant LIfe Management (PLIM), also included working groups in which major issues facing PLIM activities for nuclear power plants were identified and discussed. The first group was on Technology. Utilities should consider required provisions capacity by properly maintaining and preserving the existing power plants to the extent practicable and taking into account growing demand, limits of energy conservation, and difficulties in finding new power plant sites. Generally, the extension of the life of nuclear power plant (e.g. from 40 years to 60 years) is an attractive option for utilities, as the marginal cost of most existing nuclear power plants is lower than that of almost all other power sources. It is also an attractive option for environmental protection. Consequently, PLIM has become an important issue in the context of the regulatory reform of the electricity markets. Therefore, the three main objectives of the Technology working group are: 1) Documenting how the safety of nuclear power plants being operated for the long-term has been confirmed, and suggesting ways of sharing this information. 2) Addressing development of advanced maintenance technologies necessary over the plant lifetime, and clarifying their technical challenges. 3) Suggesting potential areas of research and development that might, be necessary. Some potential examples of such research include: - improving the effectiveness of maintenance methods to assure detection of incipient faults; - providing cost effective preventive maintenance programmes; - furnishing systematic, cost-effective refurbishment programmes framed to be consistent with efforts to extend the time between re-fuelling; - developing a methodology that moves routine maintenance on-line without compromising safety. (author)

  18. Group Work Publication-1991.

    Science.gov (United States)

    Zimpfer, David G.

    1992-01-01

    Lists 21 new publications in group work, of which 9 are reviewed. Those discussed include publications on group counseling and psychotherapy, structured groups, support groups, psychodrama, and social group work. (Author/NB)

  19. Working group report: Cosmology and astroparticle physics

    Indian Academy of Sciences (India)

    This is the report of the cosmology and astroparticle physics working group at ... discussions carried out during the workshop on selected topics in the above fields. ... Theoretical Physics Division, Physical Research Laboratory, Navrangpura, ...

  20. IAEA INTOR Workshop report, group 12

    International Nuclear Information System (INIS)

    1980-01-01

    This report gives the material for the IAEA INTOR Workshop for data base discussion in Group 12, Start-up, Burn and Shutdown. Number of problem areas from the generation of a plasma to the termination of the discharge are covered, which should be assessed to develop a scenario for sustaining a plasma for the whole duration of a pulse. The reactor relevant burn pulse is also assessed. (author)

  1. IAEA INTOR workshop report, group 16

    International Nuclear Information System (INIS)

    Hiraoka, Toru; Suzuki, Yasuo; Ogata, Atsushi

    1979-10-01

    This is the contribution of JAERI team to Group 16 of IAEA INTOR Workshop, which discusses diagnostics, data acquisition and control. Data assessment is made to consider diagnostics of INTOR. Also considered is how the diagnostics, data acquisition and control should be for a tokamak of the coming generation. The pending problems set at the Session 2 as hometasks are studied, which are given in Appendix. (author)

  2. Workshop on Topology and Geometric Group Theory

    CERN Document Server

    Fowler, James; Lafont, Jean-Francois; Leary, Ian

    2016-01-01

    This book presents articles at the interface of two active areas of research: classical topology and the relatively new field of geometric group theory. It includes two long survey articles, one on proofs of the Farrell–Jones conjectures, and the other on ends of spaces and groups. In 2010–2011, Ohio State University (OSU) hosted a special year in topology and geometric group theory. Over the course of the year, there were seminars, workshops, short weekend conferences, and a major conference out of which this book resulted. Four other research articles complement these surveys, making this book ideal for graduate students and established mathematicians interested in entering this area of research.

  3. Working group 8: inspection tools

    Energy Technology Data Exchange (ETDEWEB)

    Billey, Deb; Kania, Richard; Nickle, Randy; Wang, Rick; Westwood, Stephen

    2011-07-01

    This eighth working group of the Banff 2011 conference discussed the inspection tools and techniques used by the upstream and downstream pipeline industry to evaluate pipeline integrity. Special attention was given to the challenges and successes related to in-line inspection (ILI) technology. The background of current dent assessment criteria in B31.8 was presented, including dent definition for ILI vendors and pipeline operators as well as codes (CSA Z662 and B31.8). The workshop described examples of dents and assessments showing inconsistency with current criteria as set out by TCPL and Marathon. This workshop produced a single, industry-wide definition of the dent. It was found that the strain based criteria were more practical because depth based is conservative and may miss shallow occurrences. The creation of joint industry group was proposed to develop strain based criteria for incorporation into CSAZ662 and B31.8.

  4. Multicultural group work

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    2014-01-01

    Motivation for the activity I use this strategy for forming groups to ensure diverse/multicultural groups that combine a variety of different strengths and resources based on student's academic, disciplinary, linguistic, national, personal and work backgrounds.......Motivation for the activity I use this strategy for forming groups to ensure diverse/multicultural groups that combine a variety of different strengths and resources based on student's academic, disciplinary, linguistic, national, personal and work backgrounds....

  5. Group Work. Research Brief

    Science.gov (United States)

    Walker, Karen

    2010-01-01

    According to Johnson and Johnson, group work helps increase student retention and satisfaction, develops strong oral communication and social skills, as well as higher self-esteem (University of Minnesota, n.d.). Group work, when planned and implemented deliberately and thoughtfully helps students develop cognitive and leadership skills as well as…

  6. Multidisciplinary workshops: learning to work together.

    Science.gov (United States)

    Fatchett, Anita; Taylor, Dawn

    2013-03-01

    Health and social care professional practice needs to move with the times and to respond to the ever-changing combination of health needs, economic realities and health-policy imperatives. A clear understanding of the variety of forces at play and the ability to marshal these to good effect by working in partnership with multidisciplinary colleagues and children/families is a must, not least in this time of economic austerity and ever-rising health inequalities, when vulnerable children's lives and complex family relationships and behaviours so easily become increasingly strained and challenged. This sad reality calls out for relevant joined-up solutions by all participants--an agenda so often called into question by court judgement after court judgement. The multidisciplinary workshops to be discussed have developed and changed over the past decade and provide a safe but realistic learning environment for students from health and social care backgrounds to experience the difficulties and barriers to good multidisciplinary working, to better understand others' perspectives and activities and consider and develop new and better practical strategies for working with multidisciplinary professional colleagues, children and families. All of the workshops are underpinned by specific discipline-focused theoretical work.

  7. Critical issues with the in vivo comet assay: A report of the comet assay working group in the 6th International Workshop on Genotoxicity Testing (IWGT).

    Science.gov (United States)

    Speit, Günter; Kojima, Hajime; Burlinson, Brian; Collins, Andrew R; Kasper, Peter; Plappert-Helbig, Ulla; Uno, Yoshifumi; Vasquez, Marie; Beevers, Carol; De Boeck, Marlies; Escobar, Patricia A; Kitamoto, Sachiko; Pant, Kamala; Pfuhler, Stefan; Tanaka, Jin; Levy, Dan D

    2015-05-01

    As a part of the 6th IWGT, an expert working group on the comet assay evaluated critical topics related to the use of the in vivo comet assay in regulatory genotoxicity testing. The areas covered were: identification of the domain of applicability and regulatory acceptance, identification of critical parameters of the protocol and attempts to standardize the assay, experience with combination and integration with other in vivo studies, demonstration of laboratory proficiency, sensitivity and power of the protocol used, use of different tissues, freezing of samples, and choice of appropriate measures of cytotoxicity. The standard protocol detects various types of DNA lesions but it does not detect all types of DNA damage. Modifications of the standard protocol may be used to detect additional types of specific DNA damage (e.g., cross-links, bulky adducts, oxidized bases). In addition, the working group identified critical parameters that should be carefully controlled and described in detail in every published study protocol. In vivo comet assay results are more reliable if they were obtained in laboratories that have demonstrated proficiency. This includes demonstration of adequate response to vehicle controls and an adequate response to a positive control for each tissue being examined. There was a general agreement that freezing of samples is an option but more data are needed in order to establish generally accepted protocols. With regard to tissue toxicity, the working group concluded that cytotoxicity could be a confounder of comet results. It is recommended to look at multiple parameters such as histopathological observations, organ-specific clinical chemistry as well as indicators of tissue inflammation to decide whether compound-specific toxicity might influence the result. The expert working group concluded that the alkaline in vivo comet assay is a mature test for the evaluation of genotoxicity and can be recommended to regulatory agencies for use

  8. Natural analogue working group

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.

    1986-01-01

    A Natural Analogue Working Group was established by the Commission of the European Communities in 1985. The purpose of this group is to bring together modellers with earth scientists and others, so that maximum benefit can be obtained from natural analogue studies with a view to safe geological disposal of radioactive waste. The first meeting of this group was held in Brussels from November 5 to 7, 1985. The discussions mainly concerned the identification of the modellers' needs and of the earth scientists' capacity to provide for them. Following the debates, a written statement was produced by the Group; this document forms the core of the present Report. Notes and outlines of many of the presentations made are grouped in four appendixes. The valuable contribution of all those involved in the meeting is gratefully acknowledged

  9. Working Group Report: Neutrinos

    Energy Technology Data Exchange (ETDEWEB)

    de Gouvea, A.; Pitts, K.; Scholberg, K.; Zeller, G. P. [et al.

    2013-10-16

    This document represents the response of the Intensity Frontier Neutrino Working Group to the Snowmass charge. We summarize the current status of neutrino physics and identify many exciting future opportunities for studying the properties of neutrinos and for addressing important physics and astrophysics questions with neutrinos.

  10. Working group report: heavy ion physics

    International Nuclear Information System (INIS)

    Alam, Jan-E; Chattopadhyay, S.; Assamagan, K.; Gavai, R.; Gupta, Sourendra; Mukherjee, S.; Ray, R.; Layek, B.; Srivastava, A.; Roy, Pradip K.

    2004-01-01

    The 8th workshop on high energy physics phenomenology (WHEPP-8) was held at the Indian Institute of Technology, Mumbai, India during January 5-16, 2004. One of the four working groups, group III was dedicated to QCD and heavy ion physics (HIC). The present manuscript gives a summary of the activities of group III during the workshop. The activities of group III were focused to understand the collective behaviours of the system formed after the collisions of two nuclei at ultra-relativistic energies from the interactions of the elementary degrees of freedom, i.e. quarks and gluons, governed by non-Abelian gauge theory, i.e. QCD. This was initiated by two plenary talks on experimental overview of heavy ion collisions and lattice QCD and several working group talks and discussions. (author)

  11. Multibunch working group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The goal of this working group was to foment discussions about the use and limitations of multi-bunch, representatives from most operating or in-project synchrotron radiation sources (ALS, SPEAR, BESSY-2, SPRING-8, ANKA, DELTA, PEP-2, DIAMOND, ESRF...) have presented their experience. The discussions have been led around 3 topics: 1) resistive wall instabilities and ion instabilities, 2) higher harmonic cavities, and 3) multibunch feedback systems.

  12. Working group 4: Terrestrial

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    A working group at a Canada/USA symposium on climate change and the Arctic identified major concerns and issues related to terrestrial resources. The group examined the need for, and the means of, involving resource managers and users at local and territorial levels in the process of identifying and examining the impacts and consequences of climatic change. Climatic change will be important to the Arctic because of the magnitude of the change projected for northern latitudes; the apparent sensitivity of its terrestrial ecosystems, natural resources, and human support systems; and the dependence of the social, cultural, and economic welfare of Arctic communities, businesses, and industries on the health and quality of their environment. Impacts of climatic change on the physical, biological, and associated socio-economic environment are outlined. Gaps in knowledge needed to quantify these impacts are listed along with their relationships with resource management. Finally, potential actions for response and adaptation are presented

  13. Summary Report of Working Group: Laser-Plasma Acceleration

    International Nuclear Information System (INIS)

    Esarey, Eric; Schroeder, Carl B.; Tochitsky, Sergei; Milchberg, Howard M.

    2004-01-01

    A summary is given on the work presented and discussed in the Laser-Plasma Acceleration Working Group at the 2004 Advanced Accelerator Concepts Workshop, including the Plasma Acceleration Subgroup (Group-Leader: Eric Esarey; Co-Group-Leader: Sergei Tochitsky) and the Plasma Guiding Subgroup (Group-Leader: Howard Milchberg; Co-Group-Leader: Carl Schroeder)

  14. The BDA Dental Academic Staff Group Student Elective Workshop.

    Science.gov (United States)

    Walmsley, A D; White, D A; Hobson, R; Ensor, S

    2007-08-25

    In the current climate in dental education, many schools are re-evaluating the role of the student elective in the curriculum, with two schools no longer running elective programmes. In order to discuss the future of student electives in the dental curriculum, the Dental Academic Staff Group (DASG) of the British Dental Association organised a Student Elective Workshop, which attracted 42 delegates including nine student representatives. The following article is an account of the Workshop and its conclusions.

  15. Working Group Report: Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Artuso, M.; et al.,

    2013-10-18

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  16. Summary of the BDS and MDI CLIC08 Working Group

    CERN Document Server

    Tomás, R; Ahmed, I; Ambatu, PK; Angal-Kalinin, D; Barlow, R; Baud, J P; Bolzon, B; Braun, H; Burkhardt, H; Burt, GC; Corsini, R; Dalena, B; Dexter, AC; Dolgashev, V; Elsener, K; Fernandez Hernando, JL; Gaillard, G; Geffroy, N; Jackson, F; Jeremie, A; Jones, RM; McIntosh, P; Moffeit, K; Peltier, F; Resta-López, J; Rumolo, G; Schulte, D; Seryi, A; Toader, A; Zimmermann, F

    2008-01-01

    This note summarizes the presentations held within the Beam Delivery System and Machine Detector Interface working group of the CLIC08 workshop. The written contributions have been provided by the presenters on a voluntary basis.

  17. Summary of the Physics Opportunities Working Group

    International Nuclear Information System (INIS)

    Chen, Pisin; McDonald, K.T.

    1992-12-01

    The Physics Opportunities Working Group was convened with the rather general mandate to explore physic opportunities that may arise as new accelerator technologies and facilities come into play. Five topics were considered during the workshop: QED at critical field strength, novel positron sources, crystal accelerators, suppression of beamstrahlung, and muon colliders. Of particular interest was the sense that a high energy muon collider might be technically feasible and certainly deserves serious study

  18. Dynamics of group knowledge production in facilitated modelling workshops

    DEFF Research Database (Denmark)

    Tavella, Elena; Franco, L. Alberto

    2015-01-01

    by which models are jointly developed with group members interacting face-to-face, with or without computer support. The models produced are used to inform negotiations about the nature of the issues faced by the group, and how to address them. While the facilitated modelling literature is impressive......, the workshop. Drawing on the knowledge-perspective of group communication, we conducted a micro-level analysis of a transcript of a facilitated modelling workshop held with the management team of an Alternative Food Network in the UK. Our analysis suggests that facilitated modelling interactions can take...

  19. Oklo working group meeting

    International Nuclear Information System (INIS)

    Von Maravic, H.

    1993-01-01

    Natural analogue studies have been carried out for several years in the framework of the European Community's R and D programme on radioactive waste; and within its recent fourth five-year programme on 'Management and storage of radioactive waste (1990-94)' the Community is participating in the Oklo study, natural analogue for transfer processes in a geological repository. The Oklo project is coordinated by CEA-IPSN (F) and involves laboratories from several CEA directorates (IPSN, DTA and DCC) which collaborate with other institutions from France: CREGU, Nancy; CNRS, Strasbourg and ENSMD, Fontainebleau. Moreover, institutes from non-EC member States are also taking part in the Oklo study. The second joint CEC-CEA progress meeting of the Oklo Working Group was held in April 1992 in Brussels and gave the possibility of reviewing and discussing progress made since its first meeting in February 1991 at CEA in Fontenay-aux-Roses. About 40 participants from 15 laboratories and organizations coming from France, Canada, Gabon, Japan, Sweden and the USA underline the great interest in the ongoing research activities. The meeting focused on the different tasks within the CEC-CEA Oklo project concerning (i) field survey and sampling, (ii) characterization of the source term, (iii) studies of the petrographical and geochemical system, and (iv) studies of the hydrogeological system and hydrodynamic modelling. (author) 17 papers are presented

  20. [How to design workshops to promote health in community groups].

    Science.gov (United States)

    Hernández-Díaz, Josefina; Paredes-Carbonell, Joan J; Marín Torrens, Rosa

    2014-01-01

    One of the strategies of health promotion is to develop life skills people considering themselves as the main health resource. A workshop has to get its participants become «asset» to make decisions and create health, focusing on the development and acquisition of skills in a motivating group and in order to achieve health objectives. The concepts behind the design of a workshop are: participatory planning, training, meaningful learning, group learning and participatory techniques. The steps to follow to design a workshop and facilitate their application are: Stage 0, founding; initial stage, host and initial evaluation; central or construction stage based learning in the acquisition of knowledge, attitudes and skills, and final stage or evaluation. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  1. Total Quality Management (TQM): Group Dynamics Workshop

    Science.gov (United States)

    1990-05-15

    take for these changes to penetrate most OSD agencies. - The unique organizational culture, structure, and functioning of OSD (i.e., a gigantic size...Performing (group problem solving; Performing diagnosing and solving quality problems and sele2cting and implementing solutions). Total Quality Management...Stage, the quality improvement group diagnoses the quality problem/opportunity, gathers the right kind of quantitative data, and formulates, selects, and

  2. Fit for work? Evaluation of a workshop for rheumatology teams.

    Science.gov (United States)

    Cohen, D; Khan, S; Marfell, N

    2016-06-01

    People with rheumatoid arthritis (RA) may rapidly cease work prematurely due to ill-health. A recent survey noted that a quarter of respondents with RA experienced job loss within a year of diagnosis and 50% stopped work within 6 years. To develop and pilot workshops to increase the knowledge, skills and confidence of rheumatology team members to support work-related issues in outpatient clinics. A 3-h interactive workshop, informed by rheumatology experts and the Royal College of General Practitioners (RCGP) National Education Programme (NEP) about work and health, was developed to address both knowledge and skills in the management of health and work consultations in an outpatient setting. Questionnaires were developed for use pre- and immediately post-workshop, with questions that focused on the confidence of delegates in managing these discussions and the importance they placed upon them. Ninety-nine participants attended five workshops throughout the UK between 2013 and 2104. Seventy-three per cent (72) completed the post-workshop questionnaire. Eighty-nine per cent found the workshop useful or very useful, 88% found it relevant or very relevant and 79% responded that it had an impact or a considerable impact on their practice. Wilcoxon matched pairs signed rank tests were carried out that showed an overall increase in confidence after training. The results suggest that the workshop was both relevant and useful to participants and had an impact on their practice. This was true for all specialities. The workshops also highlighted participants' desire to understand how to use the 'fit note' to enhance their patient management. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  3. Group Work: How to Use Groups Effectively

    Science.gov (United States)

    Burke, Alison

    2011-01-01

    Many students cringe and groan when told that they will need to work in a group. However, group work has been found to be good for students and good for teachers. Employers want college graduates to have developed teamwork skills. Additionally, students who participate in collaborative learning get better grades, are more satisfied with their…

  4. African Network Operators Group (AfNOG) Training Workshops and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The African Network Operators Group (AfNOG) is a forum for technical cooperation and coordination between African network operators and engineers from the region's universities, research institutions and industry. This year, AfNOG's training workshops and meetings will be held in Rabat, Morocco, between 24 May and 6 ...

  5. International Workshop "Groups, Rings, Lie and Hopf Algebras"

    CERN Document Server

    2003-01-01

    The volume is almost entirely composed of the research and expository papers by the participants of the International Workshop "Groups, Rings, Lie and Hopf Algebras", which was held at the Memorial University of Newfoundland, St. John's, NF, Canada. All four areas from the title of the workshop are covered. In addition, some chapters touch upon the topics, which belong to two or more areas at the same time. Audience: The readership targeted includes researchers, graduate and senior undergraduate students in mathematics and its applications.

  6. Volcanism/tectonics working group summary

    International Nuclear Information System (INIS)

    Kovach, L.A.; Young, S.R.

    1995-01-01

    This article is a summary of the proceedings of a group discussion which took place at the Workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste in San Antonio, Texas on July 22-25, 1991. The working group concentrated on the subject of the impacts of earthquakes, fault rupture, and volcanic eruption on the underground repository disposal of high-level radioactive wastes. The tectonics and seismic history of the Yucca Mountain site in Nevada is discussed and geologic analogs to that site are described

  7. Working group 5: Safety

    International Nuclear Information System (INIS)

    Vinck, W.

    1976-01-01

    The technical aspects of safety for the LWR nuclear power plants, and a reprocessing plant are considered. The origin, the type and the extent of the risks for the civil populations are presented for normal working as well as accidental conditions. A general estimate of comparative risks is given for the nuclear industry with respect to other activities. The legal Belgian aspects and their applications, the kind and the quality of the technical testings, the back-fitting of plants are analysed. Considerations are given on the probabilistic analysis, the safety, and the off-shore power plants. (A.F.)

  8. Prevention of cardiovascular disease guided by total risk estimations - challenges and opportunities for practical implementation: highlights of a CardioVascular Clinical Trialists (CVCT) Workshop of the ESC Working Group on CardioVascular Pharmacology and Drug Therapy.

    LENUS (Irish Health Repository)

    Zannad, Faiez

    2011-11-03

    This paper presents a summary of the potential practical and economic barriers to implementation of primary prevention of cardiovascular disease guided by total cardiovascular risk estimations in the general population. It also reviews various possible solutions to overcome these barriers. The report is based on discussion among experts in the area at a special CardioVascular Clinical Trialists workshop organized by the European Society of Cardiology Working Group on Cardiovascular Pharmacology and Drug Therapy that took place in September 2009. It includes a review of the evidence in favour of the \\'treat-to-target\\' paradigm, as well as potential difficulties with this approach, including the multiple pathological processes present in high-risk patients that may not be adequately addressed by this strategy. The risk-guided therapy approach requires careful definitions of cardiovascular risk and consideration of clinical endpoints as well as the differences between trial and \\'real-world\\' populations. Cost-effectiveness presents another issue in scenarios of finite healthcare resources, as does the difficulty of documenting guideline uptake and effectiveness in the primary care setting, where early modification of risk factors may be more beneficial than later attempts to manage established disease. The key to guideline implementation is to improve the quality of risk assessment and demonstrate the association between risk factors, intervention, and reduced event rates. In the future, this may be made possible by means of automated data entry and various other measures. In conclusion, opportunities exist to increase guideline implementation in the primary care setting, with potential benefits for both the general population and healthcare resources.

  9. The didactics of group work

    DEFF Research Database (Denmark)

    Christensen, Gerd

    2017-01-01

    The aim of this paper is to discuss aims and means of group work as a teaching and learning method. In Denmark, group work has been implemented at all levels of education since the 1970s from primary school to university but also in training sessions in organizations. The discussion in this paper...... will take its point of departure in pedagogical textbook introductions where group work is often presented as a means to learning social skills and co-workability. However, as most students and teachers know, this is not always the case. Observations of long-term group work show that this can be a tough...... experience for the students (Christensen 2013). Contrary to expectations, the group work seemed to foster anti-social behavior and development of selfish skills. The paper will therefore conclude by suggesting how the (often) laissez-faire group pedagogy, which is dominant in Denmark, could be improved...

  10. TMAP ad hoc Working Group Fish Progress report 2007

    NARCIS (Netherlands)

    Bolle, L.J.; Damm, U.; Diederichs, B.; Jager, Z.; Overzee, van H.M.J.

    2007-01-01

    Building on previous work done by the TMAP ad hoc Working Group Fish, a meeting and a workshop were held in Hamburg in June and October 2007. The most important aim of both was to come to an agreement on how to proceed with the data preparations and analyses, and to facilitate the exchange of data

  11. Group Work with Transgender Clients

    Science.gov (United States)

    Dickey, Lore M.; Loewy, Michael I.

    2010-01-01

    Drawing on the existing literature, the authors' research and clinical experiences, and the first author's personal journey as a member and leader of the transgender community, this article offers a brief history of group work with transgender clients followed by suggestions for group work with transgender clients from a social justice…

  12. Challenges Facing Group Work Online

    Science.gov (United States)

    Chang, Bo; Kang, Haijun

    2016-01-01

    Online group work can be complicated because of its asynchronous characteristics and lack of physical presence, and its requirements for skills in handling technology, human relationships, and content-related tasks. This study focuses on the administrative, logistical and relationship-related challenges in online group work. Challenges in areas…

  13. Working with Difficult Group Members.

    Science.gov (United States)

    Kottler, Jeffrey A.

    1994-01-01

    Describes types of group members who are challenging in group settings including entitled, manipulative, and character-disordered clients. Provides suggestions for working with these group members, either as isolated cases or as homogenous populations, emphasizing the protection of other clients' rights. Includes 31 references. (Author/CRR)

  14. The Second Workshop of the European Network for Work Information (ENWI)

    DEFF Research Database (Denmark)

    Borlund, Pia; Mandl, Thomas; Womser-Hacker, Christa

    2013-01-01

    The second workshop of ENWI was held in Malmö, Sweden, June 12-13, 2013. ENWI is the European Network for Work Information which intends to establish a group of researchers who share a common interest in the study of workplace information practices. The better understanding of people and their ta...

  15. Metabolomics and Epidemiology Working Group

    Science.gov (United States)

    The Metabolomics and Epidemiology (MetEpi) Working Group promotes metabolomics analyses in population-based studies, as well as advancement in the field of metabolomics for broader biomedical and public health research.

  16. Group Work with Juvenile Delinquents.

    Science.gov (United States)

    Zimpfer, David G.

    1992-01-01

    Reviews group work literature on juvenile delinquents. Presents overview of interventions, including positive peer culture, cognitive-behavioral treatment, psychoeducational treatment, treatment of learned behavior, action-oriented treatment, milieu therapy, parental involvement, assertiveness training, and music therapy. Discusses outcome…

  17. Working group report: Neutrino physics

    Indian Academy of Sciences (India)

    olation. PACS No. 14.6.q. 1. Introduction. It was decided to cover a myriad of topics for discussion and work in the neu- trino physics working group, rather than restrict ourselves to any one focal theme. 269 ..... [8] Super-Kamiokande Collaboration: K Abe et al, Phys. Rev. Lett. 97, 171801 (2006), hep-ex/0607059.

  18. Accelerator technology working group summary

    International Nuclear Information System (INIS)

    Jameson, R.A.

    1985-01-01

    A summary is presented of workshop deliberations on basic scaling, the economic viability of laser drive power for HEP accelerators, the availability of electron beam injectors for near-term experiments, and a few very general remarks on technology issues

  19. Summary, Working Group 1: Electron guns and injector designs

    International Nuclear Information System (INIS)

    Ben-Zvi, I.; Bazarov, I.V.

    2006-01-01

    We summarize the proceedings of Working Group 1 of the 2005 Energy Recovery Linac (ERL) Workshop. The subject of this working group, the electron gun and injector design, is arguably the most critical part of the ERL as it determines the ultimate performance of this type of accelerators. Working Group 1 dealt with a variety of subjects: The technology of DC, normal-conducting RF and superconducting RF guns; beam dynamics in the gun and injector; the cathode and laser package; modeling and computational issues; magnetized beams and polarization. A short overview of these issues covered in the Working Group is presented in this paper

  20. Summary report for the Microwave Source Working Group

    International Nuclear Information System (INIS)

    Westenskow, G.A.

    1997-01-01

    This report summarizes the discussions of the Microwave Source Working Group during the Advanced Accelerator Concepts Workshop held October 13-19, 1996 in the Granlibakken Conference Center at Lake Tahoe, California. Progress on rf sources being developed for linear colliders is reviewed. Possible choices for high-power rf sources at 34 GHz and 94 GHz for future colliders are examined. 27 refs

  1. Summary report for the Microwave Source Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Westenskow, G.A.

    1997-01-01

    This report summarizes the discussions of the Microwave Source Working Group during the Advanced Accelerator Concepts Workshop held October 13-19, 1996 in the Granlibakken Conference Center at Lake Tahoe, California. Progress on rf sources being developed for linear colliders is reviewed. Possible choices for high-power rf sources at 34 GHz and 94 GHz for future colliders are examined. 27 refs.

  2. Summary of the accelerator working group

    International Nuclear Information System (INIS)

    Ankenbrandt, C.; Noble, R.J.

    1998-03-01

    We present a summary of the main topics discussed in the Accelerator Working Group during the ''Workshop on the Physics at the First Muon Collider''. The discussions centered on critical design issues for a high-intensity, medium-energy proton synchrotron that would replace the present Fermilab 8 GeV Booster early in the next century. Such a machine is intended both to serve the hadron program with an order of magnitude increase in average proton current and to be compatible as a source for a future muon collider. Particular issues discussed at length include rf system design, control of longitudinal space-charge effects, bunching of proton beams and beam instabilities

  3. CFCC working group meeting: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

  4. CEC natural analogue working group

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.A.

    1986-01-01

    The second meeting of the CEC Natural Analogue Working Group took place on June 17-19, 1986, hosted by the Swiss NAGRA in Interlaken (CH). A review of recent progress in natural analogue programmes was carried out, and complemented by detailed discussions about geomicrobiology, archaeological analogues, natural colloids, and use of analogues to increase confidence in safety assessments for radioactive waste disposal. A statement drafted by the Group, and the presentations made, are put together in this report

  5. Workshop on cultural usability and human work interaction design

    DEFF Research Database (Denmark)

    Clemmensen, Torkil; Ørngreen, Rikke; Roese, Kerstin

    2008-01-01

    it into interaction design. The workshop will present current research into cultural usability and human work interaction design. Cultural usability is a comprehensive concept, which adheres to all kinds of contexts in which humans are involved (private family, work, public and private organizations, nature......, Workplace observation, Think-Aloud Usability Test, etc. These techniques often give - seemingly - similar results when applied in diverse cultural settings, but experience shows that we need a deep understanding of the cultural, social and organizational context to interpret the results, and to transform...

  6. HIDE working groups: synchrotron based system: summary

    International Nuclear Information System (INIS)

    Barton, M.Q.

    1978-01-01

    A brief overview is given of the work resulting from a one-week workshop on the use of synchrotrons in heavy ion fusion, i.e., a Heavy Ion Demonstration Experiment (HIDE). Topics discussed concerned the number of beams on target, space charge limitations, choice of ion charge state, and areas identified as needing further work

  7. Working group report: Collider Physics

    Indian Academy of Sciences (India)

    11KEK, Tsukuba, Japan. 12Cornell University ... This is summary of the activities of the working group on collider physics in the IXth ... In view of the requirements of the hour and the available skills and interests, it was decided to .... The actual computation, which is long and somewhat tedious, is currently under way and is ...

  8. Group Work with Abusive Parents.

    Science.gov (United States)

    Kruger, Lois; And Others

    1979-01-01

    Social work students conclude from an experience that parents can consider alternative means of disciplining children when they participate in a parent group that is comfortable and when attendance is promoted by provision of tangible services. Parents achieved increased sense of self-worth and learned appropriate ways of expressing anger. (Author)

  9. CEC Natural Analogue Working Group

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.A.

    1989-01-01

    The central theme for the third meeting of the CEC analogue working group was ''How can analogue data be used for performance assessments, both in support of the results and for presentation to the public''. This report puts together the most recent achievements in this field, together with a review of on-going natural analogue programmes

  10. The FORATOM Transport Working Group

    International Nuclear Information System (INIS)

    Lehmann, P.

    2000-01-01

    Based in Brussels, the European atomic forum FORATOM is the trade association of the European nuclear industry which was established in the early 1960s to promote nuclear power and to facilitate relations with the European institutions. One of the main mechanisms which FORATOM uses, in its dealings with the European Commission and other international organisations, is the involvement of several working groups bringing together groups of experts drawn from the industrial companies in order to identify the issues and to develop the widest possible common views on which the industry must express its representative, substantial and deliverable opinion. The Transport Working Group (TWG) has the objective of dealing with transport of radioactive material, especially nuclear materials. The TWG usually meets three times a year in Brussels or another selected location. It has strong links with the European Commission which are evidenced by the fact that it officially represents the European nuclear industry, with the status of observer, at the meetings of the Standing Working Group on Safe Transport of Radioactive Material which was set up in 1982, upon a request of the European Parliament, to advise the European Commission in the field of safe transport of radioactive materials. The Standing Working Group (SWG) assists the European Union's Member States in the revision process of IAEA recommendations and helps a correct and harmonious application of these recommendations within the European Union. In previous years, the Standing Working Group has proposed over 40 different studies, financed by the European Commission, on important transport issues. The FORATOM TWG encourages its member organisations to participate in studies proposed by the Commission and has been cooperating for many years with the Commission in the field of many studies aimed to improve the application of transport regulations. The need to maintain the safe and reliable operation of plants that generate

  11. THE HIGGS WORKING GROUP: SUMMARY REPORT.

    Energy Technology Data Exchange (ETDEWEB)

    DAWSON, S.; ET AL.

    2005-08-01

    This working group has investigated Higgs boson searches at the Tevatron and the LHC. Once Higgs bosons are found their properties have to be determined. The prospects of Higgs coupling measurements at the LHC and a high-energy linear e{sup +}e{sup -} collider are discussed in detail within the Standard Model and its minimal supersymmetric extension (MSSM). Recent improvements in the theoretical knowledge of the signal and background processes are presented and taken into account. The residual uncertainties are analyzed in detail. Theoretical progress is discussed in particular for the gluon-fusion processes gg {yields} H(+j), Higgs-bremsstrahlung off bottom quarks and the weak vector-boson-fusion (VBF) processes. Following the list of open questions of the last Les Houches workshop in 2001 several background processes have been calculated at next-to-leading order, resulting in a significant reduction of the theoretical uncertainties. Further improvements have been achieved for the Higgs sectors of the MSSM and NMSSM. This report summarizes our work performed before and after the workshop in Les Houches. Part A describes the theoretical developments for signal and background processes. Part B presents recent progress in Higgs boson searches at the Tevatron collider. Part C addresses the determination of Higgs boson couplings, part D the measurement of tan {beta} and part E Higgs boson searches in the VBF processes at the LHC. Part F summarizes Higgs searches in supersymmetric Higgs decays, part G photonic Higgs decays in Higgs-strahlung processes at the LHC, while part H concentrates on MSSM Higgs bosons in the intense-coupling regime at the LHC. Part I presents progress in charged Higgs studies and part J the Higgs discovery potential in the NMSSM at the LHC. The last part K describes Higgs coupling measurements at a 1 TeV linear e{sup +}e{sup -} collider.

  12. THE HIGGS WORKING GROUP: SUMMARY REPORT

    International Nuclear Information System (INIS)

    DAWSON, S.

    2005-01-01

    This working group has investigated Higgs boson searches at the Tevatron and the LHC. Once Higgs bosons are found their properties have to be determined. The prospects of Higgs coupling measurements at the LHC and a high-energy linear e + e - collider are discussed in detail within the Standard Model and its minimal supersymmetric extension (MSSM). Recent improvements in the theoretical knowledge of the signal and background processes are presented and taken into account. The residual uncertainties are analyzed in detail. Theoretical progress is discussed in particular for the gluon-fusion processes gg → H(+j), Higgs-bremsstrahlung off bottom quarks and the weak vector-boson-fusion (VBF) processes. Following the list of open questions of the last Les Houches workshop in 2001 several background processes have been calculated at next-to-leading order, resulting in a significant reduction of the theoretical uncertainties. Further improvements have been achieved for the Higgs sectors of the MSSM and NMSSM. This report summarizes our work performed before and after the workshop in Les Houches. Part A describes the theoretical developments for signal and background processes. Part B presents recent progress in Higgs boson searches at the Tevatron collider. Part C addresses the determination of Higgs boson couplings, part D the measurement of tan β and part E Higgs boson searches in the VBF processes at the LHC. Part F summarizes Higgs searches in supersymmetric Higgs decays, part G photonic Higgs decays in Higgs-strahlung processes at the LHC, while part H concentrates on MSSM Higgs bosons in the intense-coupling regime at the LHC. Part I presents progress in charged Higgs studies and part J the Higgs discovery potential in the NMSSM at the LHC. The last part K describes Higgs coupling measurements at a 1 TeV linear e + e - collider

  13. Spent Fuel Working Group Report

    International Nuclear Information System (INIS)

    O'Toole, T.

    1993-11-01

    The Department of Energy is storing large amounts of spent nuclear fuel and other reactor irradiated nuclear materials (herein referred to as RINM). In the past, the Department reprocessed RINM to recover plutonium, tritium, and other isotopes. However, the Department has ceased or is phasing out reprocessing operations. As a consequence, Department facilities designed, constructed, and operated to store RINM for relatively short periods of time now store RINM, pending decisions on the disposition of these materials. The extended use of the facilities, combined with their known degradation and that of their stored materials, has led to uncertainties about safety. To ensure that extended storage is safe (i.e., that protection exists for workers, the public, and the environment), the conditions of these storage facilities had to be assessed. The compelling need for such an assessment led to the Secretary's initiative on spent fuel, which is the subject of this report. This report comprises three volumes: Volume I; Summary Results of the Spent Fuel Working Group Evaluation; Volume II, Working Group Assessment Team Reports and Protocol; Volume III; Operating Contractor Site Team Reports. This volume presents the overall results of the Working Group's Evaluation. The group assessed 66 facilities spread across 11 sites. It identified: (1) facilities that should be considered for priority attention. (2) programmatic issues to be considered in decision making about interim storage plans and (3) specific vulnerabilities for some of these facilities

  14. Reports from the Combined Performance Working Groups

    CERN Multimedia

    S. Haywood

    The main goal of the Combined Performance Groups is to study the detector performance for physics, as well as to monitor the effect of changes to the detector layout and the evolution of the software. The groups combine the expertise available in several different subdetectors. In addition, they are responsible for developing combined reconstruction algorithms and are involved in the calibration of energy scales and optimising resolutions. For the Workshop, the four groups made a real effort to compare the reconstruction in Athena (the "New" C++ software framework) and Atrecon (the "Old" software used for the TDR studies). b-tagging Working Group: Over the last few months, the description of the Inner Detector in the simulation has become more realistic, following the evolution of the detector design. This has caused the amount of material in the simulation to increase and the Pixel B-layer has been moved to a larger radius to allow for a wider beam-pipe. Nevertheless, the good performance of the b-tagging (...

  15. Summary Report of Working Group 1: Laser-Plasma Acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Geddes, C.G.R.; Clayton, C.; Lu, W.; Thomas, A.G.R.

    2010-06-01

    Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

  16. Summary Report of Working Group 1: Laser-Plasma Acceleration

    International Nuclear Information System (INIS)

    Geddes, C.G.R.; Clayton, C.; Lu, W.; Thomas, A.G.R.

    2010-01-01

    Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

  17. Working Group Report: Quantum Chromodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J. M. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-10-18

    This is the summary report of the energy frontier QCD working group prepared for Snowmass 2013. We review the status of tools, both theoretical and experimental, for understanding the strong interactions at colliders. We attempt to prioritize important directions that future developments should take. Most of the efforts of the QCD working group concentrate on proton-proton colliders, at 14 TeV as planned for the next run of the LHC, and for 33 and 100 TeV, possible energies of the colliders that will be necessary to carry on the physics program started at 14 TeV. We also examine QCD predictions and measurements at lepton-lepton and lepton-hadron colliders, and in particular their ability to improve our knowledge of strong coupling constant and parton distribution functions.

  18. Radiation sources working group summary

    International Nuclear Information System (INIS)

    Fazio, M.V.

    1998-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, components technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigation, and phenomena that impact source design such as fatigue in resonant structures due to RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

  19. Report for Working Group 2

    DEFF Research Database (Denmark)

    Bjerregaard Jensen, Lotte; Thompson, Mary Kathryn

    2013-01-01

    The theme for the second working group was design education in civil and environmental engineering. Issues discussed during this meeting included the current state of the art of civil design education, the importance of civil design education, tools and techniques that can be used to build design...... competencies, the importance of balancing hard and soft skills, and the role that culture and context play and will continue to play in civil design in the future....

  20. Historic Radio Astronomy Working Group

    Science.gov (United States)

    2007-06-01

    This special issue of Astronomische Nachrichten contains the proceedings of a session of the Historic Radio Astronomy Working Group of the International Astronomical Union that took place during the 26th General Assembly of the IAU in Prague on 17th August 2006. In addition to the talks presented in Prague some contributions were solicited to give a more complete overview of `The Early History of European Radio Astronomy'.

  1. Euratom Neutron Radiography Working Group

    DEFF Research Database (Denmark)

    Domanus, Joseph Czeslaw

    1986-01-01

    reactor fuel as well as establish standards for radiographic image quality of neutron radiographs. The NRWG meets once a year in each of the neutron radiography centers to review the progress made and draw plans for the future. Besides, ad-hoc sub-groups or. different topics within the field of neutron......In 1979 a Neutron Radiography Working Group (NRWG) was constituted within Buratom with the participation of all centers within the European Community at which neutron facilities were available. The main purpose of NRWG was to standardize methods and procedures used in neutron radiography of nuclear...... radiography are constituted. This paper reviews the activities and achievements of the NRWG and its sub-groups....

  2. Integration of Work and Learning. Proceedings of the Workshop on Curriculum Innovation (2nd, Bled, Slovenia, September 1997).

    Science.gov (United States)

    European Training Foundation, Turin (Italy).

    This proceedings consists of 13 papers and 3 working group presentations from a 3-day workshop on issues of work-linked learning relevant for curriculum development. "Welcome" (Slavko Gaber, Peter de Rooij) is followed by two introductory papers: "Integration of Work and Learning: A Challenge for Both Schools and Companies"…

  3. Teaching Note--Evaluation of an Avoiding Plagiarism Workshop for Social Work Students

    Science.gov (United States)

    Fenster, Judy

    2016-01-01

    A 1-hour workshop on how to avoid plagiarizing when writing academic papers was developed and delivered at an orientation session for BSW and MSW students at a university in the northeast United States. Six social work instructors led the workshops at the university's main campus and two extension centers. Before and after the workshop, students…

  4. Working Group Report: Higgs Boson

    Energy Technology Data Exchange (ETDEWEB)

    Dawson, Sally; Gritsan, Andrei; Logan, Heather; Qian, Jianming; Tully, Chris; Van Kooten, Rick [et al.

    2013-10-30

    This report summarizes the work of the Energy Frontier Higgs Boson working group of the 2013 Community Summer Study (Snowmass). We identify the key elements of a precision Higgs physics program and document the physics potential of future experimental facilities as elucidated during the Snowmass study. We study Higgs couplings to gauge boson and fermion pairs, double Higgs production for the Higgs self-coupling, its quantum numbers and $CP$-mixing in Higgs couplings, the Higgs mass and total width, and prospects for direct searches for additional Higgs bosons in extensions of the Standard Model. Our report includes projections of measurement capabilities from detailed studies of the Compact Linear Collider (CLIC), a Gamma-Gamma Collider, the International Linear Collider (ILC), the Large Hadron Collider High-Luminosity Upgrade (HL-LHC), Very Large Hadron Colliders up to 100 TeV (VLHC), a Muon Collider, and a Triple-Large Electron Positron Collider (TLEP).

  5. Summary muon detection working group

    International Nuclear Information System (INIS)

    Stanton, N.R.

    1993-01-01

    The areas of concentration of the Muon Working Group reflected its composition: about half of the group was interested primarily is extending the capability of existing general purpose colliders (CDF, D0). Smaller numbers of people were interested in B physics with general purpose colliders at the SSC and LHC, with SSC fixed target experiments, and with dedicated forward colliders. Good muon tagging, and possibly also muon triggering, is essential for studying CP violation in B i →J/ψX, J/ψ→μ + μ - ; as a flavor tag, with the semimuonic decay B→μ + X or bar B→μ - X tagging the flavor of the partner; for studying the physics of the semimuonic B decays themselves; and for looking for really rare decays like B→μ + μ -

  6. Space Interferometry Science Working Group

    Science.gov (United States)

    Ridgway, Stephen T.

    1992-12-01

    Decisions taken by the astronomy and astrophysics survey committee and the interferometry panel which lead to the formation of the Space Interferometry Science Working Group (SISWG) are outlined. The SISWG was formed by the NASA astrophysics division to provide scientific and technical input from the community in planning for space interferometry and in support of an Astrometric Interferometry Mission (AIM). The AIM program hopes to measure the positions of astronomical objects with a precision of a few millionths of an arcsecond. The SISWG science and technical teams are described and the outcomes of its first meeting are given.

  7. Summary of the laser working group

    International Nuclear Information System (INIS)

    Bigio, I.J.; Kurnit, N.A.; Donaldson, W.R.; Srinivasan-Rao, T.

    1988-10-01

    The laser working group considered several options to deliver synchronized laser pulses of the required energy to the photocathode and laser triggered switches. These requirements actually decreased during the course of the workshop, and the values finally settled upon (<10 μJ in 100 fs at ∼250 nm for the photocathode and ∼20 mJ in 2 ps near either 250 nm or 1 μm for the switches) were considered to be well within the state of the art. Some development work may be required, however, to provide a system that has the desirable characteristics of stability, ease of use and low maintenance. The baseline concept, which is similar to a number of existing systems, utilizes doubled Nd:YAG-pumped dye oscillator/amplifiers to produce an upconverted picosecond pulse that can be amplified to tens of mJ in a KrF excimer laser. A fraction of the dye oscillator output is also compressed by means of a fiber-grating compressor and further amplified in a dye amplifier before being upconverted to produce the synchronized pulse for the photocathode. 9 refs., 1 fig

  8. Mixed Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The treatment of mixed waste remains one of this country's most vexing environmental problems. Mixed waste is the combination of radioactive waste and hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA). The Department of Energy (DOE), as the country's largest mixed waste generator, responsible for 95 percent of the Nation's mixed waste volume, is now required to address a strict set of milestones under the Federal Facility Compliance Act of 1992. DOE's earlier failure to adequately address the storage and treatment issues associated with mixed waste has led to a significant backlog of temporarily stored waste, significant quantities of buried waste, limited permanent disposal options, and inadequate treatment solutions. Between May and November of 1993, the Mixed Waste Working Group brought together stakeholders from around the Nation. Scientists, citizens, entrepreneurs, and bureaucrats convened in a series of forums to chart a course for accelerated testing of innovative mixed waste technologies. For the first time, a wide range of stakeholders were asked to examine new technologies that, if given the chance to be tested and evaluated, offer the prospect for better, safer, cheaper, and faster solutions to the mixed waste problem. In a matter of months, the Working Group has managed to bridge a gap between science and perception, engineer and citizen, and has developed a shared program for testing new technologies

  9. Occupational Therapy in the practice of therapeutic groups and workshops with mental health patients

    Directory of Open Access Journals (Sweden)

    Janaina Bussola Montrezor

    2013-12-01

    Full Text Available In this study, we aimed to demonstrate the effectiveness of occupational therapy to patients with mental disorders through therapy groups in an intensive inpatient unit. The following treatment groups were performed: focus groups, operative groups, drawing workshops, and arts workshops. The study included 280 patients (46.07% with ICD F20-29, 23.57% with ICD F30-39, and 14.28% with ICD F19. Of all the patients studied (n = 280, 54.00% participated in the operative groups, 52.85% in the focus groups, 46.80% in the drawing workshops, and 45.70% in the art workshops. In all groups, the participation of the ICD F20-29 group was higher (focus group with 49.25%, 54.00% in the operative group, 51.00% in the workshops of drawing, and 66.00% in art workshops, followed by the ICD F30-39 group with 24.25% in the focus group, 27.00% in the operative group, and 22.00% in the drawing workshops; the ICD F19 group stood out in the arts workshops. Patients with schizophrenia, psychoses, bipolar disorders, among others (ICD F20-20 and ICD F30-39 were the most active in the therapeutic groups, which discussed contents such as joy, anger, fear, thoughts of death, etc. The ICD F19 group presented the greatest participation in the art workshops, a fact that can be explained by the profile of these patients, because many have been in prison and/or admitted to long-stays in hospitals where they learned to perform manual tasks for subsequent survival in society. We concluded that therapeutic groups are effective in treating mental health patients because they contribute to hospital discharge and improve patients’ conditions.

  10. Summary for working group B on long-term stability

    International Nuclear Information System (INIS)

    Peggs, S.G.

    1992-01-01

    A total of 36 workshop participants attended at least one session of the Long-Term Stability working group. We avoided turning these sessions into a specialized seminar series by meeting in two subgroups, loosely labeled Analysis and Diffusion ampersand Tracking, so that working discussions among a reasonably small number of people were possible. Nonetheless, no attempt is made to categorize the 13 group B papers according to original subgroup. A similar workshop, the Workshop on Accelerator Orbit and Particle Tracking Problems, was held almost exactly 10 years ago at Brookhaven. It is interesting to see how many of the participants in the photograph of that workshop appear again in the photograph at the front of these proceedings. Fortunately, it is not correct to infer that little progress has been made in the last decade, nor that the average age of the participants has increased significantly. Rather, the recent photograph has many more, younger, faces than its predecessor. This attests to the ongoing interest and vigorous activity in an area of central importance to accelerator physics

  11. Synthesis of the working group discussions

    International Nuclear Information System (INIS)

    2003-01-01

    activities. In coming years, a greater emphasis on EBS integrity issues can be expected within SKI's long-term programme for gradual development of review capability. In the autumn of 2004, an additional EBS workshop is planned, which will focus on EBS component quality and the expected initial state of the EBS. Subsequently, specialised workshops are planned for more detailed insight in selected areas, targeting issue resolution as well as identification. A few of the technical issues that received considerable attention during the workshop are noted below: The performance assessment need to contain a description of the initial state of the system that can be regarded as realistic rather than idealised. In particular, the characterisation and statistical analysis of both large and small defects in the weldments of the copper canister has to be rigorous. The long-term experiments aimed at demonstrating feasibility of the KBS-3 concept have to be reviewed in more detail. It was suggested that SKB consider whether the present programme needs to be extended. SKB needs to present a plan for monitoring during repository operation. One of the working groups recommended that SKB should set up a demonstration tunnel in the repository, which would be dismantled and examined, with the purpose of performance confirmation prior to sealing the repository. The understanding of the resaturation phase for the buffer needs to be improved. Preliminary results indicate that the resaturation phase may be more extended that previously anticipated. In addition, an uneven resaturation of the buffer may result in localised stress transfer to the canister. All conceivable implications of an extended or uneven resaturation phase has to be evaluated, if they cannot be very convincingly ruled out, e.g. thermal gradients across the buffer may lead to mass transfer of chemical components, and consequently variations in thermal, hydrological and mechanical properties. More data is needed for evaluation of

  12. Working group 4B - human intrusion: Design/performance requirements

    International Nuclear Information System (INIS)

    Channell, J.

    1993-01-01

    There is no summary of the progress made by working group 4B (Human Intrusion: Design/performance Requirements) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group was to discuss the waste disposal standard, 40 CFR Part 191, in terms of the design and performance requirements of human intrusion. Instead, because there were so few members, they combined with working group 4A and studied the three-tier approach to evaluating postclosure performance

  13. WICCI Wildlife Working Group Report

    Science.gov (United States)

    LeDee, Olivia E.; Hagell, Suzanne; Martin, K.; McFarland, David; Meyer, Michael; Paulios, Andy; Ribic, Christine A.; Sample, D.; Van Deelen, Timothy R.

    2013-01-01

    Wisconsin is world-renowned for its diversity of ecological landscapes and wildlife populations.  The northern forests, southern prairies, and interior and coastal wetlands of the state are home to more than 500 terrestrial animal species.  These animals supply the Wisconsin public with aesthetic, cultural, and economic benefits; our identity and economy are intertwined with these natural resources.  Climate change is altering the behavior, distribution, development, reproduction, and survival of these animal populations.  In turn, these changes will alter the aesthetic, cultural, and economic benefits we receive from them.  The focus of the Wildlife Working Group is to document past and current impacts, anticipate changes in wildlife distribution and abundance, and develop adaptation strategies to maintain the vitality and diversity of Wisconsin's wildlife populations.

  14. Nonaccelerator physics working group summary

    International Nuclear Information System (INIS)

    Ayres, D.S.; Beier, E.W.; Cherry, M.L.; Marciano, W.J.

    1986-01-01

    The Nonaccelerator Physics Working Group set itself the task of predicting the contributions of nonaccelerator experiments to particle physics during the 1990s, in order to assess the needs for new experimental facilities. The main topics studied by the subgroups were: (1) the possibility of doing particle physics experiments with high energy cosmic rays from astrophysical sources; (2) the prospects for experiments which seek to measure the masses of neutrinos and the mixing of neutrino flavors; (3) an examination of the implications for proton decay of recent theoretical developments in grand unified and string theories. Other topics included a survey of magnetic monopole searches, an assessment of future prospects for double-beta-decay and nucleon-decay experiments, and a review of recent progress on neutrino and dark-matter detectors based on quasiparticles in superconductors and phonons in crystals

  15. Theoretical Issues in Clinical Social Group Work.

    Science.gov (United States)

    Randall, Elizabeth; Wodarski, John S.

    1989-01-01

    Reviews relevant issues in clinical social group practice including group versus individual treatment, group work advantages, approach rationale, group conditions for change, worker role in group, group composition, group practice technique and method, time as group work dimension, pretherapy training, group therapy precautions, and group work…

  16. Learning a job: the workshop training with group of postgraduates

    Directory of Open Access Journals (Sweden)

    Corrado Pontalti

    2014-09-01

    Full Text Available In this work is faced the problem of the professional competence of the young students during their specialization in psychotherapy. Experience is described top work with them in small group, for three years, to fortnightly frequency. The clinical situations of the students are discusses with continuity, from the moment of the formulation of the project of care up to its conclusion. The sustained thesis is that the acquisition of competence stirs on two ways: a procedural competence (strategies and tactics of intervention and relational competence (co-transferal dynamics. Necessity is sustained that the teacher has a complete professional in comparison to the characteristics of the situation to transimit a work, almost artistic. The exploration of the relational dynamics it become important in once following, with objective to harmonize procedural competence and relational competence in a mature professional competence. Brief clinical illustrations are introduced.Keywords: training, procedural competence, relational competence, work group versus work community.

  17. Working group report on agriculture

    International Nuclear Information System (INIS)

    Stewart, B.

    1991-01-01

    A summary is provided of the results from a working group investigating the implications of climatic change on agriculture in the Great Plains. The group investigated the current state of knowledge concerning basic understanding of climatic impacts, scales of analysis, impact model validation, lack of integrated modelling, and incomplete and incompatible data sets. Basic understanding of current spatial and temporal climatic variability and its impacts and implications for agricultural production, land resource sustainability, and farm management decisions is imprecise. There is little understanding of the magnitude of potential longer-term changes, timing, likely regional changes, or probability of change. Most models are unvalidated, and knowledge of potential carbon dioxide enrichment effects on crops is very uncertain and the effects are poorly understood. Research should be expanded to develop a better understanding of the critical thresholds and sensitivity of Great Plains agricultural production and economic systems. Holistic methodology should be implemented to integrate weather and climatic information with crop and environmental processes, farm level decision making, and local and regional economic conditions

  18. Summary Report of Working Group 7: Muon Colliders and Advanced Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Nagaitsev, Sergei [Fermilab; Berg, J.Scott [Brookhaven

    2012-07-01

    The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

  19. Making Cooperative Learning Groups Work.

    Science.gov (United States)

    Hawley, James; De Jong, Cherie

    1995-01-01

    Discusses the use of cooperative-learning groups with middle school students. Describes cooperative-learning techniques, including group roles, peer evaluation, and observation and monitoring. Considers grouping options, including group size and configuration, dyads, the think-pair-share lecture, student teams achievement divisions, jigsaw groups,…

  20. Working Group Proposed to Preserve Archival Records

    Science.gov (United States)

    Bartlett, Jennifer L.

    2013-01-01

    The AAS and AIP co-hosted a Workshop in April 2012 with NSF support (AST-1110231) that recommends establishing a Working Group on Time Domain Astronomy (WGTDA) to encourage and advise on preserving historical observations in a form meaningful for future scientific analysis. Participants specifically considered archival observations that could describe how astronomical objects change over time. Modern techniques and increased storage capacity enable extracting additional information from older media. Despite the photographic plate focus, other formats also concerned participants. To prioritize preservation efforts, participants recommended considering the information density, the amount of previously published data, their format and associated materials, their current condition, and their expected deterioration rate. Because the best digitization still produces an observation of an observation, the originals should be retained. For accessibility, participants recommended that observations and their metadata be available digitally and on-line. Standardized systems for classifying, organizing, and listing holdings should enable discovery of historical observations through the Virtual Astronomical Observatory. Participants recommended pilot projects that produce scientific results, demonstrate the dependence of some advances on heritage data, and open new avenues of exploration. Surveying a broad region of the sky with a long time-base and high cadence should reveal new phenomena and improve statistics for rare events. Adequate financial support is essential. While their capacity to produce new science is the primary motivation for preserving astronomical records, their potential for historical research and citizen science allows targeting cultural institutions and other private sources. A committee was elected to prepare the WGTDA proposal. The WGTDA executive committee should be composed of ~10 members representing modern surveys, heritage materials, data management

  1. Writing for publication in medical education: the benefits of a faculty development workshop and peer writing group.

    Science.gov (United States)

    Steinert, Yvonne; McLeod, Peter J; Liben, Stephen; Snell, Linda

    2008-01-01

    Although educational innovations in medical education are increasing in number, many educators do not submit their ideas for publication. The goal of this initiative was to assist faculty members write about their educational innovations. Twenty-four faculty members participated in this intervention, which consisted of a half-day workshop, three peer writing groups, and independent study. We assessed the impact of this intervention through post-workshop evaluations, a one-year follow-up questionnaire, tracking of manuscript submissions, and an analysis of curriculum vitae. The workshop evaluations and one-year follow-up demonstrated that participants valued the workshop small groups, self-instructional workbook, and peer support and feedback provided by the peer writing groups. One year later, nine participants submitted a total of 14 manuscripts, 11 of which were accepted for publication. In addition, 10 participants presented a total of 38 abstracts at educational meetings. Five years later, we reviewed the curriculum vitae of all participants who had published or presented their educational innovation. Although the total number of publications remained the same, the number of educationally-related publications and presentations at scientific meetings increased considerably. A faculty development workshop and peer writing group can facilitate writing productivity and presentations of scholarly work in medical education.

  2. Working group report on forestry

    International Nuclear Information System (INIS)

    MacIver, D.

    1991-01-01

    The results and conclusions of a working group held to discuss the state of knowledge and information needs concerning potential climate change implications for forestry are presented. The lack of knowledge in some basic processes, for example physiological and genetics, limits ability to evaluate and project the adaptation and responses to climate change. Areas where knowledge is weak include: the potential maximum productivity for a given climate region; the extent to which climate change can be accomodated by genetic adaptation; ways to improve the temporal/spatial distribution of projected precipitation and temperature changes and their magnitudes; the effect of global warming on fire severity and behavior; the current lightning distribution and relationship to fire and the response of this to global warming; socio-economic needs and constraints for management of wilderness areas; carbon dioxide enrichment effects on forest growth and water use efficiency; carbon benefits associated with afforestation and other carbon sequestering programs; impacts of forest practices on the carbon cycle; and the definition of biological diversity on the Great Plains. Recommended research initiatives include improving climate projections, targetted biological process research, monitoring for change and adaptive management, and development of decision support systems

  3. Tevatron-for-LHC Report of the QCD Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Albrow, Michael G.; Begel, M.; Bourilkov, D.; Campanelli, M.; Chlebana, F.; De Roeck, A.; Dittmann, J.R.; Ellis, S.D.; Field, B.; Field, R.; Gallinaro, M.; /Fermilab

    2006-10-01

    The experiments at Run 2 of the Tevatron have each accumulated over 1 fb{sup -1} of high-transverse momentum data. Such a dataset allows for the first precision (i.e. comparisons between theory and experiment at the few percent level) tests of QCD at a hadron collider. While the Large Hadron Collider has been designed as a discovery machine, basic QCD analyses will still need to be performed to understand the working environment. The Tevatron-for-LHC workshop was conceived as a communication link to pass on the expertise of the Tevatron and to test new analysis ideas coming from the LHC community. The TeV4LHC QCD Working Group focused on important aspects of QCD at hadron colliders: jet definitions, extraction and use of Parton Distribution Functions, the underlying event, Monte Carlo tunes, and diffractive physics. This report summarizes some of the results achieved during this workshop.

  4. Summary Report of Working Group 5: Beam and Radiation Generation, Monitoring, and Control

    International Nuclear Information System (INIS)

    Church, Mike; Kim, Kiyong

    2010-01-01

    This paper summarizes the activities and presentations of Working Group 5 of the Advanced Accelerator Concepts Workshop held at Annapolis, Maryland in June 2010. Working Group 5 touched on a broad range of topics in the fields of beam and radiation generation and their monitoring and control. These topics were not comprehensively covered in this Workshop, but rather the Working Group concentrated on specific new developments and recent investigations. The Working Group divided its sessions into four broad categories: cathodes and electron guns, radiation generation, beam diagnostics, and beam control and dynamics. This summary is divided into the same structure.

  5. Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia.

    Science.gov (United States)

    Sudiajeng, Lilik; Adiputra, Nyoman; Leibbrandt, Richard

    2012-12-01

    This research was conducted to assess the positive effect of the ergonomics work station on the health impairment and electrical energy usage at the woodworking workshop in Bali, Indonesia. Woodworking workshops are dangerous, particularly when they are used improperly. Workers are exposed to health hazards that cause health impairment and inefficiencies in their work conditions. A preliminary study at a woodworking workshop at the Bali State Polytechnic showed that the work station was not suitable to body size of the participants and caused awkward postures. In addition, there was also an inappropriate physical work environment. Both inappropriate work station and physical work environment caused participants to be less active and motivated. This paper reports on an experimental study into the effects of an ergonomic intervention at this workshop. The participants were 2 groups of male students with 10 participants in each group. The first group performed the task with the original work station as a control group, while the second group performed the task with the new work station. The study found a significant difference between groups (p work station decreased the working heart rate (16.7%), the total score of musculoskeletal disorders (17.3%), and the total score of psychological fatigue (21.5%). Furthermore, it also decreased the electrical energy usage (38.7%). This shows that an ergonomics intervention on work station decreased the health impairment and saved electrical energy usage. It also protected the workers from woodworking hazards and allowed participants to perform their tasks in healthy, safe, convenient and efficient work conditions.

  6. Working group report: Quantum chromodynamics

    Indian Academy of Sciences (India)

    3NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam, The Netherlands. 4Harish-Chandra Research Institute, Chhatnag Road, Jhusi, Allahabad 211 ... tant to extend the resummation framework to polarised process to look at polarised.

  7. Report of the Second International Workshop on molecular blood group genotyping

    NARCIS (Netherlands)

    Daniels, G.; van der Schoot, C. E.; Olsson, M. L.

    2007-01-01

    The second International Society of Blood Transfusion and International Council for Standardization in Haematology workshop on molecular blood group genotyping was held in 2006. Forty-one laboratories participated. Six samples were distributed: two representing DNA from transfusion-dependent

  8. Social Maturation: Work Group Proceedings.

    Science.gov (United States)

    Resnick, Michael D.; And Others

    1985-01-01

    Each of the seven factors that affect adolescent social development is presented together with a description of potentially important research, service, and policy initiatives within each topic area. The factors are self-esteem, peer group, parenting, family, services, enforced dependency, and positive sexual socialization. (CT)

  9. Working Group 2 summary: Space charge effects in bending systems

    International Nuclear Information System (INIS)

    Bohn, C.L.; Emma, P.J.

    2000-01-01

    At the start of the Workshop, the authors asked the Working Group 2 participants to concentrate on three basic goals: (1) survey the status of how comprehensively the physics concerning space-charge effects in bends is understood and how complete is the available ensemble of analytic and computational tools; (2) guided by data from experiments and operational experience, identify sources of, and cures for, beam degradation; and (3) review space-charge physics in rings and the limitations it introduces. As the Workshop unfolded, the third goal naturally folded into the other two goals, and these goals, they believe, were fulfilled in that the Working Group was able to compile an end product consisting of a set of recommendations for potentially fruitful future work. This summary constitutes an overview of the deliberations of the Working Group, and it is their hope that the summary clarifies the motivation for the recommended work listed at the end. The summary is organized according to the two aforementioned goals, and the prime topics of discussion appear as subsections under these goals

  10. Scenario Development Workshop Synopsis. Integration Group for the Safety Case - June 2015

    International Nuclear Information System (INIS)

    Smith, Paul; Voinis, Sylvie; Griffault, Lise; De Meredieu, Jean; Kwong, Gloria; ); Van Luik, Abraham; Bailey, Lucy; Capouet, Manuel; Depaus, Christophe; Makino, Hitoshi; Leigh, Christi; Kirkes, Ross; Leino, Jaakko; Niemeyer, Matthias; Wolf, Jens; Watson, Sarah; Franke, Bettina; Ilett, Doug; Pastina, Barbara; Weetjens, Eef

    2016-03-01

    safety case that also includes a broad range of evidence and arguments that complement and support the reliability of the results of the quantitative analyses. Assessments typically describe and evaluate repository evolution and potential radiological and other consequences for a range of scenarios. The present report is based largely on the presentations and discussions at the second workshop, including the working group sessions, and on a review of the questionnaire responses. It is structured as follows: - Chapter 2 summarises the work of the NEA and other international organisations on scenario development and related topics. - Chapter 3 discusses regulatory perspectives on scenario development, including general regulatory principles, more specific guidance, the level of detail in regulatory guidance and the importance of dialogue and review. - Chapter 4 describes the roles of scenario development both in safety assessments and, more generally, in the management of uncertainty in repository programmes. Its role in promoting interdisciplinary communication is also discussed. - Chapter 5 describes the broad classes into which scenarios are generally divided, including what-if scenarios and the special case of human intrusion. - Chapter 6 reviews the approaches to scenario development followed by various national programmes, including their evolution, common features and differences between programmes, the main broad steps in scenario development and the tools that have been used to implement these and also the issues of comprehensiveness and sufficiency of the sets of scenarios that are derived. - Chapter 7 discusses the analysis of scenarios, including the development of models and their application in deterministic and probabilistic calculations. - Finally, Chapter 8 summarises the main findings of this report and draws some conclusions

  11. Working group on a database for cold moderators

    International Nuclear Information System (INIS)

    Broome, T. A.

    1997-09-01

    The working group meeting was chaired by Broome. The working group was charged with the task: Gather a table of neutronic performance known for specific designs; operational, test, theoretical/calculated. Set up generation of a (very briefly) annotated bibliography on this topic. A joint meeting with the Working Group on Moderator Performance Measurements was held to define the data on cold moderators which should be contained in the data base. It became clear that there exists only a small amount of data in very different forms much of it incomplete in its detail. So, rather than spending time collating existing data, it was considered to be more generally profitable to concentrate on the specification of the database and its implementation. The aim was to propose a system which could start quickly and simply yet be capable of extension and development in the future. The system was outlined in the summary session of the workshop and agreed by the participants.

  12. The effect of workshop groups on achievement goals and performance in biology: An outcome evaluation

    Science.gov (United States)

    Born, Wendi Kay

    This two-year quasi-experiment evaluated the effect of peer-led workshop groups on performance of minority and majority undergraduate biology students in a three-course series and investigated motivational explanations for performance differences. The workshop intervention used was modeled after a program pioneered by Treisman (1992) at the University of California. Majority volunteers randomly assigned to workshops (n = 61) performed between 1/2 and 1 standard deviation better than those assigned to the control group (n = 60; p challenge interventions can be highly beneficial for both majority and minority participants and that institutions can promote excellence by incorporating workshop programs like the one described here. These interventions have been shown to be more effective and cost less than remedial interventions.

  13. Report of the Working Group on novel concepts and materials

    International Nuclear Information System (INIS)

    Crawford, R.K.; Brun, T.O.

    1997-09-01

    The working group meeting was chaired by Carpenter and Brun. This session was intended as a session to present ideas that had not yet been fully explored, as well as a place for discussion of topics that did not readily fit in any of the other workshop sessions. The first part of the session focused on moderator materials. During the course of the discussions of some novel potential moderator materials it became clear that there was not even agreement on what makes a good moderator for cold neutrons at short-pulse sources. There were two competing diametrically-opposed schools of thought.

  14. Post-Disaster Social Justice Group Work and Group Supervision

    Science.gov (United States)

    Bemak, Fred; Chung, Rita Chi-Ying

    2011-01-01

    This article discusses post-disaster group counseling and group supervision using a social justice orientation for working with post-disaster survivors from underserved populations. The Disaster Cross-Cultural Counseling model is a culturally responsive group counseling model that infuses social justice into post-disaster group counseling and…

  15. AER Working Group B activities in 2001

    International Nuclear Information System (INIS)

    Darilek, P.

    2001-01-01

    Review of AER Working Group B Meeting in Czech Republic - Plzen is given. Regular meeting of Core Design Group was organized by SKODA JS, Inc. and held at Plzen-Bolevec, Czech Republic, May 21+22, 2001, together with Working Group A (Authors)

  16. AER Working Group B activities in 2010

    International Nuclear Information System (INIS)

    Darilek, P.

    2010-01-01

    Review of AER Working Group B Meeting in Modra - Harmonia, Slovakia is given. Regular meeting of Core Design Group was organized by VUJE, Inc. and held at Modra - pension Harmonia, Slovakia, April 20-22, 2010, together with Working Group A. Presented papers (see List of papers and List of participants) covered topics as follows. (Author)

  17. Working group 2: regulatory and standards development

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Chad; Lee, Shu; Peters, Mike; Parsonage, Kevin; Saad, Ziad

    2011-07-01

    This second workshop explored regulatory standards and developments in the pipeline industry. New methods of improved damage prevention for regulators and pipelines to implement were presented. First, incident trends were discussed, using incident analysis to identify the possible causes and solutions of incidents. The determination of realistic goals was attempted. Next, leak detection was discussed with the presentation of current work in annex E which will form part of the new CSA Z662 standard in a few years time. New testing methods such as external methods of leak detection were studied. A third presentation showed the recent development in overpressure protection with reference to the new annex M incorporated in the CSA Z662-11 standard. The last presentation introduced the topic of public safety issues associated with CO2 pipelines with regard to different failure scenarios and the appropriate emergency responses.

  18. Report of the Working Design Group

    Science.gov (United States)

    1992-01-01

    The engineering study group in the LOUISA workshop was responsible for producing a preliminary general design for an optical synthetic aperture telescope on the Moon. This design is intended to be a test case for focusing continuing design studies. The scope of the design included consideration of the array geometry, individual telescopes, metrology, site attributes, and construction. However, no attempt was made to go into further depth in the design than to cover the essential characteristics of the instrument. The starting point for the array design was the lunar optical array discussed by Burke (1985). His array geometry followed the design and correlation procedure of the 27-element Very Large Array (VLA) radio telescopes near Socorro, New Mexico.

  19. PERSPECTIVES ON GROUP WORK IN DISTANCE LEARNING

    Directory of Open Access Journals (Sweden)

    Rune Sarromaa HAUSSTÄTTER

    2007-01-01

    Full Text Available Current distance education benefits greatly from educational software that makes group work possible for students who are separated in time and space. However, some students prefer distance education because they can work on their own. This paper explores how students react to expectations on behalf of the course provider to do their assignments in collaborative groups. They are seemingly both positively surprised by the challenges that group work offer, and they are less positive to the downsides of group work. The paper discusses both sides of the experiences and suggests why this might be a paradox to live with.

  20. IAEA INTOR workshop report, groups 2, 5, 7, 9, 10 and 15

    International Nuclear Information System (INIS)

    1980-02-01

    In order to prove scientific feasibility of magnetic confinement fusion, large fusion devices are under construction in several countries (JT-60 in Japan, T-15 in U.S.S.R., TFTR in U.S.A. and JET in EC). International Tokamak Reactor (INTOR) Workshop was organized by the International Atomic Energy Agency (IAEA) to identify roles, objectives and characteristics of the next generation fusion device. This report is a compilation of the home task reports of six groups on INTOR engineering aspects by Japan Atomic Energy Research Institute for workshop sessions 2 and 3 held in 1979. Tasks of the respective groups are group 2: first wall/blanket/shield, group 5: magnetics, group 7: systems integration and structure, group 9: assembly and remote maintenance, group 10: radiation shielding and personnel access, group 15: safety and environment. (author)

  1. Working group report on water resources, supply and demand

    International Nuclear Information System (INIS)

    Marta, T.J.

    1990-01-01

    A summary is presented of the issues discussed, and the conclusions and recommendations of a working group on water resources, supply and demand. The issues were grouped into the categories of detecting climatic change and water impacts, simulating potential impacts, and responding to potential impacts. The workshop groups achieved consensus on the following points: the physics of global warming and climatic change have been satifactorily proven; there appears to be some evidence of climatic change and a signal could soon be detected; policy decisions and strategic plans for climatic change and its potential impacts are needed immediately; and targets and priorities for decison making should be identified and addressed immediately. Three top-priority issues are the identification of indicators for the detection of climatic change impacts on hydrology, determining response to climate-related change, and evaluation of design criteria. Better information on regional climate and hydrology under conditions of global warming is needed before design criteria could be altered

  2. School Counselors' Experiential Training in Group Work

    Science.gov (United States)

    Bore, Samuel K.; Armstrong, Stephen A.; Womack, Ashley

    2010-01-01

    School counselors' perceptions of the efficacy and satisfaction of their experiential training in group work were investigated. An exploratory factor analysis (n = 304) revealed four salient factors: leader characteristics, leader responsibilities, child/adolescent group leadership and adult group leadership. A majority of participants indicated…

  3. Report of the third international workshop on molecular blood group genotyping

    NARCIS (Netherlands)

    Daniels, G.; van der Schoot, C. E.; Gassner, C.; Olsson, M. L.

    2009-01-01

    The Third International Society of Blood Transfusion Workshop on Molecular Blood Group Genotyping was held in 2008, with a feedback meeting at the International Society of Blood Transfusion Congress in Macao SAR, China. Thirty-three laboratories participated, eight less than in 2006. Six samples

  4. Report of the fourth International Workshop on molecular blood group genotyping

    NARCIS (Netherlands)

    Daniels, G.; van der Schoot, C. E.; Olsson, M. L.

    2011-01-01

    The fourth International Society of Blood Transfusion (ISBT) workshop on molecular blood group genotyping was held in 2010, with a feedback meeting at the ISBT Congress in Berlin, Germany. Fifty laboratories participated, 17 more than in 2008. Six samples were distributed. Samples 1-3 were DNA

  5. Report of the First International Workshop on molecular blood group genotyping

    NARCIS (Netherlands)

    Daniels, G.; van der Schoot, C. E.; Olsson, M. L.

    2005-01-01

    The use of molecular genetic technology for blood group typing is becoming routine procedure in many reference laboratories worldwide. A First International Workshop was organized on behalf of the International Society of Blood Transfusion (ISBT) and the International Council for Standardization in

  6. Scenario Focus Group Workshop Report (2nd SFG Meeting)

    OpenAIRE

    Water Futures and Solution Initiative, (WFaS)

    2016-01-01

    The Scenario Focus Group (SFG) is comprised of water policy and planning decision makers at the national and international level who collaborate within the Water Futures and Solutions Initiative, primarily by identifying key water management challenges, priorities, trends, options, and trade-offs within their regions and advising on where further systems analysis and investigation would be most helpful for understanding externalities and guiding planning decisions. The SFG guides the developm...

  7. 2017 Cybersecurity Workshop: Readouts from Working Groups - Video Text

    Science.gov (United States)

    applicability of artificial intelligence to search for cybersecurity gaps in our existing SKATA networks. Second primarily renewable that all back each other up; that are all highly intelligent, artificial intelligence we have in cyber security, digital technologies, artificial intelligence. We think that that would

  8. Preliminary recommendations of the Noise Working Group

    International Nuclear Information System (INIS)

    Legerton, M.L.

    1995-01-01

    In 1993 the DTI set up a Working Group largely consisting of independent experts on wind turbine noise. The main objectives of the Working Group were to define a framework which can be used to measure and rate the noise from wind turbines and to provide indicative noise levels thought to offer a reasonable degree of protection to wind farm neighbours and encourage best practice in turbine design and wind farm siting and layout. This paper presents the preliminary recommendations of the Working Group. (Author)

  9. Working group 1A - basis for the standard-safety

    International Nuclear Information System (INIS)

    Whipple, C.

    1993-01-01

    This paper presents a summary of the progress made by working group 1A (Basis for the Safety Standard) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group discussed the semantics of terms within the standard 40 CFR Part 191, the implementation of this standard, the advanced notice of rulemaking, the issue of emitting carbon-14 through a gaseous pathway, the strategy of dealing with standards for contamination of drinking water and groundwater, the 100,000 year time frame, and the analysis of specific comments. The specific comments dealt with the cost effectiveness of the standard, the dose histogram for populations and individuals, groundwater definition and the underlying technology driver for this standard

  10. ORGANIZATIONAL WORK GROUPS AND WORK TEAMS – APPROACHES AND DIFFERENCES

    Directory of Open Access Journals (Sweden)

    Raluca ZOLTAN

    2015-02-01

    Full Text Available Work groups and work teams represents basic structures of traditional and modern organizations, and during the time they have been intensively researched. However, managers often do not always consider the fundamental differences between groups and teams, which will lead to unrealistic goals and results below expectations. Thus, in the present paper we propose a review of the main researching approaches on groups and teams (psychosocial, socio-technical, and behavioral approach, in the third part of the paper being detailed the fundamental differences between groups and teams in the light of these approaches.

  11. Working group report: Cosmology and astroparticle physics

    Indian Academy of Sciences (India)

    This is the report of the cosmology and astroparticle physics working group ... origin of the accelerating Universe: Dark energy and particle cosmology by Y-Y Keum, .... Neutrino oscillations with two and three mass varying supernova neutrinos ...

  12. Summary of the Linear Collider Working Group

    International Nuclear Information System (INIS)

    Ruth, R.D.

    1989-01-01

    The focus of the Linear Collider Working Group was on a next generation linear collider. Topics discussed are: parameters; damping rings; bunch compression and pre-acceleration; linac; final focus; and multibunch effects. 8 refs., 3 figs., 7 tabs

  13. Eastern and Southern Africa Seismological Working Group

    International Nuclear Information System (INIS)

    Ogubazghi, G.

    2002-01-01

    Member countries of the Eastern and Southern Africa Seismologica Working Group are listed. The presentation also gives the objectives, activities, date of birth and sponsors of the said ESARSWG. Areas of possible cooperation with CTBTO are indicated

  14. Summary of the polarized beam working group

    International Nuclear Information System (INIS)

    Wienands, U.; Dyck, O. van.

    1989-05-01

    The polarized beam working group reviewed the AGS Bookster and TRIUMF KAON Factory facilities, heard an overview of the subject of siberian snakes, discussed internal polarized gas targets, and made recommendations for further study

  15. Working group report: Collider and B physics

    Indian Academy of Sciences (India)

    The activities of the working group including some of the seminars are summarized. The written ... The search for supersymmetry at future colliders also received a lot of attention. It is believed that ..... Then the kinematic regions can be divided.

  16. Evaluation of Occupational Therapy Workshops to Prevent Work-Related Injuries or Illnesses among Vocational Students

    Science.gov (United States)

    Lecours, Alexandra; Therriault, Pierre-Yves

    2018-01-01

    The few studies aiming to evaluate prevention interventions provided by occupational therapists in health at work were conducted in work settings. However, to intervene in primary prevention, developing occupational therapy interventions with students learning a trade is relevant. The objective is to evaluate workshops designed and set up by…

  17. "Think Tank" Workshop in Work Evaluation: March 19-21, 1969.

    Science.gov (United States)

    Hoffman, Paul R., Ed.

    A two-day workshop, conducted to study the different meanings of the concept of work evaluation, was participated in by representatives from rehabilitation facilities, work evaluation training programs, institutional organizations, and rehabilitation research and training centers. In addition, different types of patient populations were…

  18. The petroleum industry's response to climate change: The role of the IPIECA Global Climate Change Working Group

    International Nuclear Information System (INIS)

    Lemlin, J.S.; Graham Bryce, I.

    1994-01-01

    IPIECA formed the Global Climate Change Working Group in 1988 to coordinate members' efforts to understand the global climate change issue, to promote support for education and research, and to serve as the focus for engaging with international activities. The working group has sponsored a number of activities, including seminars and workshops. The Lisbon Experts Workshop on Socio-Economic Assessment of Climate Change in 1993 represents the most recent IPIECA forum for interaction between industry experts and those involved in the production of the IPCC 1995 Second Assessment Report. This workshop is described in the article. (author)

  19. Beyond the Standard Model: Working group report

    Indian Academy of Sciences (India)

    Right-handed neutrino production in hot dense plasmas and constraints on the ... We thank all the participants of this Working Group for their all-round cooperation. The work of AR has been supported by grants from the Department of Science ...

  20. Working group report: Heavy ion physics

    Indian Academy of Sciences (India)

    The 8th workshop on high energy physics phenomenology (WHEPP-8) was ... by two plenary talks on experimental overview of heavy ion collisions and ... charge. At low temperature and density the quarks and gluons are confined within.

  1. Working group report: Neutrino and astroparticle physics

    Indian Academy of Sciences (India)

    8. We present the discussions carried out during the workshop on selected topics in the above fields and also indicate progress made subsequently. The neutrino physics subgroup studied the possibilities of constraining neutrino masses, ...

  2. Teaching Group Work with "The Great Debaters"

    Science.gov (United States)

    Moe, Jeffry; Autry, Linda; Olson, Joann S.; Johnson, Kaprea F.

    2014-01-01

    An experiential learning activity, based on the film "The Great Debaters" (Washington, D., 2007), was used during a group work class. Description and preliminary evaluation of the activity is provided, including analysis of participant scores on the group leader self-efficacy instrument at multiple points. Implications and future…

  3. Report of the tunnel safety working group

    International Nuclear Information System (INIS)

    Gannon, J.

    1991-04-01

    On 18 February 1991 the Project Manager formed a working group to address the safety guidelines and requirements for the underground facilities during the period of accelerator construction, installation, and commissioning. The following report summarizes the research and discussions conducted by the group and the recommended guidelines for safety during this phase of the project

  4. NEANSC Working Group on international evaluation cooperation

    International Nuclear Information System (INIS)

    Larson, D.C.; Nordborg, C.; Dunford, C.L.

    1992-01-01

    In the last three years, several newly evaluated nuclear data libraries have been released. Japan completed JENDL-3 in late 1989, JEF-2/EFF-2 was completed by Europe in 1991, and ENDF/B-VI was completed by the US in 1989. With the support of the NEACRP and the NEANDC, (recently combined into the NEA Nuclear Science Committee NEANSC), a Working Group was formed in 1989 to promote cooperative activities among the evaluation groups in OECD countries. Technical activities of the Working Group are carried out by subgroups formed to carry out specific investigations. Seven subgroups are currently active, with four more initiated by the Working Group at its meeting in May 1991. Brief descriptions of current subgroup activities are given

  5. Group identity and positive deviance in work groups.

    Science.gov (United States)

    Kim, Moon Joung; Choi, Jin Nam

    2017-12-05

    This study examines why and how identity cognitions, including group identification and individual differentiation, influence the positive deviance of employees. We identify the risk-taking intention of employees as a critical psychological mechanism to overcome stigma-induced identity threat of positive deviance. The analysis of data collected from 293 members comprising 66 work teams reveals that the relationship between individual differentiation and positive deviance is partially mediated by risk-taking intention. The indirect effect of group identification on positive deviance through risk-taking intention is also significant and positive in groups with low conformity pressure, whereas the same indirect effect is neutralized in groups with high conformity pressure. The current analysis offers new insights into the way the group context and the identity cognition of members explain the development of positive deviance and workplace creativity.

  6. The Individual Art of Speaking Well – teaching it by means of group and project work

    Directory of Open Access Journals (Sweden)

    Henrik Juel

    2010-03-01

    Full Text Available Based on experimental workshops in rhetoric and free public speaking involving student performance at Speaker’s Corner, London, this article argues that a focus on highly individualskills is compatible with group work and socio-cultural learning principles. The author maintains that collective responsibility may inspire the peak performance of the individual.

  7. Summary Report of Working Group 6: Laser-Plasma Acceleration

    International Nuclear Information System (INIS)

    Leemans, Wim P.; Downer, Michael; Siders, Craig

    2006-01-01

    A summary is given of presentations and discussions in the Laser-Plasma Acceleration Working Group at the 2006 Advanced Accelerator Concepts Workshop. Presentation highlights include: widespread observation of quasi-monoenergetic electrons; good agreement between measured and simulated beam properties; the first demonstration of laser-plasma acceleration up to 1 GeV; single-shot visualization of laser wakefield structure; new methods for measuring <100 fs electron bunches; and new methods for 'machining' laser-plasma accelerator structures. Discussion of future direction includes: developing a roadmap for laser-plasma acceleration beyond 1 GeV; a debate over injection and guiding; benchmarking simulations with improved wake diagnostics; petawatt laser technology for future laser-plasma accelerators

  8. Summary of Working Group 3: Machine Design and R and D

    International Nuclear Information System (INIS)

    Ohmori, C.; Kirk, H.; Haseroth, H.

    2006-01-01

    Various topics on machine studies and component R and D for Neutrino Factory subsystems were discussed in Working Group 3 (WG3) at the NuFact05 Workshop. In this working group, 29 talks and 2 posters were presented. We also had special focus sessions for lively discussions on several important issues; targets, cooling, proton driver, FFAGs and acceleration, and a World Wide Design study. Joint Sessions were held with WG1 and WG4 on machine requirements

  9. Working Conditions in Carpet Weaving Workshops and Muscu-loskeletal Complaints among Workers in Tabriz - Iran

    Directory of Open Access Journals (Sweden)

    Jalil Nazari

    2012-12-01

    Full Text Available Background: Background: Carpet weaving operations usualy involve poor working conditions that can lead to the development of musculoskeletal disorders (MSDs. This study investigated MSDs among car-pet weavers in relation to working conditions from workers' view in Tabriz City, Northwest Iran.Method: This cross-sectional and descriptive study was conducted in city of Tabriz, Iran. Data were col-lected using interviews and questionnaires. The study population consisted of 200 randomly selected healthy weavers from twenty five active carpet weaving workshops.Results: The results showed a high prevalence of musculoskeletal problems among the study population. The most commonly affected body areas were neck, lower back, ankles/feet, hands/wrists, upper back, shoulders and knees, respectively. More than half of the weavers were not satisfied with the thermal con-dition, noise level and cleanliness of the air in the workshops. The result indicated a significant relation-ship between upper back symptoms and daily working time and between lower back symptoms and the numbers of rows of knots woven in a day. Weavers' satisfaction with hand tools shape and thermal condi-tion of the workshops were associated with lower back symptoms, whereas satisfaction with weaving looms were associated with upper back complaints.Conclusion: The poor working condition of hand-woven carpet workshops such as environmental conditionsand work station design and tools should be the subject of ergonomics interventions.

  10. Report of the Workshop on the conclusion of initiated works; Relatorio consolidado do Workshop sobre conclusao das obras iniciadas: como implementa-las

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This work collects the discussions which took place during the workshop about initiated civil works in the Brazilian electric power system and how to make them feasible to be concluded. Several experts were present. The main topics were: the historical aspects, different options for financing the unfinished works and the present situations of several unfinished works

  11. Report of the Workshop on the conclusion of initiated works; Relatorio consolidado do Workshop sobre conclusao das obras iniciadas: como implementa-las

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    This work collects the discussions which took place during the workshop about initiated civil works in the Brazilian electric power system and how to make them feasible to be concluded. Several experts were present. The main topics were: the historical aspects, different options for financing the unfinished works and the present situations of several unfinished works

  12. Group work as an incentive for learning – students’ experiences of group work

    Science.gov (United States)

    Hammar Chiriac, Eva

    2014-01-01

    Group work is used as a means for learning at all levels in educational systems. There is strong scientific support for the benefits of having students learning and working in groups. Nevertheless, studies about what occurs in groups during group work and which factors actually influence the students’ ability to learn is still lacking. Similarly, the question of why some group work is successful and other group work results in the opposite is still unsolved. The aim of this article is to add to the current level of knowledge and understandings regarding the essence behind successful group work in higher education. This research is focused on the students’ experiences of group work and learning in groups, which is an almost non-existing aspect of research on group work prior to the beginning of the 21st century. A primary aim is to give university students a voice in the matter by elucidating the students’ positive and negative points of view and how the students assess learning when working in groups. Furthermore, the students’ explanations of why some group work ends up being a positive experience resulting in successful learning, while in other cases, the result is the reverse, are of interest. Data were collected through a study-specific questionnaire, with multiple choice and open-ended questions. The questionnaires were distributed to students in different study programs at two universities in Sweden. The present result is based on a reanalysis and qualitative analysis formed a key part of the study. The results indicate that most of the students’ experiences involved group work that facilitated learning, especially in the area of academic knowledge. Three important prerequisites (learning, study-social function, and organization) for group work that served as an effective pedagogy and as an incentive for learning were identified and discussed. All three abstractions facilitate or hamper students’ learning, as well as impact their experiences with

  13. Uganda group works to reduce AIDS' impact.

    Science.gov (United States)

    Mcbrier, P

    1996-10-01

    War and AIDS-related mortality in Uganda have created an estimated 1.2 million orphans in the country. Child welfare advocates and nongovernmental organizations (NGOs) have therefore been working together for the past 4 years under an umbrella organization to coordinate efforts for vulnerable children. The Uganda Community-Based Association for Child Welfare (UCOBAC), links people and organizations involved in child advocacy, facilitates relations between the government and NGOs, and helps to strengthen the capacity of NGOs to identify and implement projects. UCOBAC emphasizes community-based initiatives which allow children to remain in their own communities instead of being institutionalized. One example of such an approach is a vocational skills training program in Rakai district established to help young orphans trying to make it on their own. More than 300 youths had benefitted from the program as of December 1994 and plans are underway to expand the program to 10 more districts. UCOBAC is also training communities and NGOs to identify and implement viable projects, and helps child welfare organizations by serving as a network for sharing information. UCOBAC came into existence in October 1990 with 93 members, including 57 local NGOs, 17 international NGOs, and 19 individual members. The organization has since established local offices in 35 of Uganda's 39 districts. UNICEF has thus far provided about US$130,000 for UCOBAC activities and will continue to fund local NGO initiatives through UCOBAC. UCOBAC, however, is giving priority to becoming financially independent of UNICEF within a couple of years. Future projects include an inventory of NGO child welfare projects, a child welfare resource library, and networking workshops with NGOs and government policymakers.

  14. Astrophysics at RIA (ARIA) Working Group

    International Nuclear Information System (INIS)

    Smith, Michael S.; Schatz, Hendrik; Timmes, Frank X.; Wiescher, Michael; Greife, Uwe

    2006-01-01

    The Astrophysics at RIA (ARIA) Working Group has been established to develop and promote the nuclear astrophysics research anticipated at the Rare Isotope Accelerator (RIA). RIA is a proposed next-generation nuclear science facility in the U.S. that will enable significant progress in studies of core collapse supernovae, thermonuclear supernovae, X-ray bursts, novae, and other astrophysical sites. Many of the topics addressed by the Working Group are relevant for the RIKEN RI Beam Factory, the planned GSI-Fair facility, and other advanced radioactive beam facilities

  15. Abandoned Mine Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The Mine Waste Working Group discussed the nature and possible contributions to the solution of this class of waste problem at length. There was a consensus that the mine waste problem presented some fundamental differences from the other classes of waste addresses by the Develop On-Site Innovative Technologies (DOIT) working groups. Contents of this report are: executive summary; stakeholders address the problems; the mine waste program; current technology development programs; problems and issues that need to be addressed; demonstration projects to test solutions; conclusion-next steps; and appendices

  16. Military Munitions Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices

  17. Military Munitions Waste Working Group report

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-30

    This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices.

  18. Les Houches physics at TeV colliders 2005 beyond the standard model working group: Summary report

    CERN Document Server

    Allanach, Benjamin C.; Skands, Peter Z.; Accomando, E.; Azuelos, Georges; Baer, H.; Balazs, Csaba; Belanger, G.; Benakli, Karim; Boudjema, Fawzi; Brelier, B.; Bunichev, V.; Cacciapaglia, Giacomo; Carena, Marcela; Choudhury, D.; Delsart, Pierre-Antoine; De Sanctis, U.; Desch, Klaus; Dobrescu, Bogdan A.; Dudko, Lev V.; El Kacimi, M.; Ellwanger, Ulrich; Ferrag, S.; Finch, A.; Franke, F.; Fraas, H.; Freitas, A.; Gambino, Paolo; Ghodbane, Nabil; Godbole, R.M.; Goujdami, D.; Gris, Ph.; Guasch, Jaume Inglada; Guchait, M.; Hahn, Thomas; Heinemeyer, Sven; Hektor, A.; Hesselbach, Stefan; Hollik, W.; Hugonie, Cyril; Hurth, T.; Idarraga, J.; Jinnouchi, Osamu; Kalinowski, J.; Kneur, J.L.; Kraml, Sabine; Kadastik, M.; Kannike, K.; Lafaye, R.; Landsberg, Greg L.; Lari, T.; Lee, Jae Sik; Lykken, J.; Mahmoudi, F.; Mangano, Michelangelo L.; Menon, Arjun; Miller, D.J.; Millet, T.; Milstene, Caroline; Montesano, S.; Moortgat, F.; Moortgat-Pick, Gudrid A.; Moretti, Stefano; Morrissey, David Edgar; Muanza, S.; Muhlleitner, M.M.; Muntel, M.; Kluge, Hannelies; Ohl, Thorsten; Penaranda, Siannah; Perelstein, M.; Perez, E.; Perries, S.; Peskin, Michael E.; Petzoldt, J.; Pilaftsis, Apostolos; Plehn, Tilman; Polesello, G.; Pompos, A.; Porod, Werner; Przysiezniak, H.; Pukhov, A.; Raidal, Martti; Rainwater, David Landry; Raklev, Are R.; Rathsman, Johan; Reuter, Juergen; Richardson, Peter; Rindani, Saurabh D.; Rolbiecki, K.; Rzehak, H.; Schumacher, M.; Schumann, S.; Semenov, A.; Serin, L.; Servant, Geraldine; Shepherd-Themistocleous, Claire H.; Sherstnev, S.; Silvestrini, Luca; Singh, R.K.; Slavich, Pietro; Spira, Michael; Sopczak, A.; Sridhar, K.; Tompkins, Lauren Alexandra; Troncon, Clara; Tsuno, S.; Wagh, K.; Wagner, Carlos E.M.; Weiglein, Georg; Wienemann, P.; Zerwas, D.; Zhukov, V.; Gris, Ph

    2005-01-01

    The work contained herein constitutes a report of the Beyond the Standard Model'' working group for the Workshop Physics at TeV Colliders, Les Houches, France, 2-20 May, 2005. We present reviews of current topics as well as original research carried out for the workshop. Supersymmetric and non-supersymmetric models are studied, as well as computational tools designed in order to facilitate their phenomenology.

  19. Les Houches Physics at TeV Colliders 2005 Beyond the Standard Model Working Group: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Allanach, B.C.; /Cambridge U., DAMTP; Grojean, C.; /Saclay, SPhT /CERN; Skands, P.; /Fermilab; Accomando, E.; Azuelos, G.; Baer, H.; Balazs, C.; Belanger, G.; Benakli, K.; Boudjema, F.; Brelier, B.; Bunichev, V.; Cacciapaglia, G.; Carena, M.; Choudhury, D.; Delsart, P.-A.; De Sanctis, U.; Desch, K.; Dobrescu, B.A.; Dudko, L.; El Kacimi, M.; /Saclay,

    2006-03-17

    The work contained herein constitutes a report of the ''Beyond the Standard Model'' working group for the Workshop ''Physics at TeV Colliders'', Les Houches, France, 2-20 May, 2005. We present reviews of current topics as well as original research carried out for the workshop. Supersymmetric and non-supersymmetric models are studied, as well as computational tools designed in order to facilitate their phenomenology.

  20. Research workshop to research work: initial steps in establishing health research systems on Malaita, Solomon Islands

    Directory of Open Access Journals (Sweden)

    Kekuabata Esau

    2010-10-01

    Full Text Available Abstract Introduction Atoifi Adventist Hospital is a 90 bed general hospital in East Kwaio, Malaita, Solomon Islands providing services to the population of subsistence villagers of the region. Health professionals at the hospital and attached College of Nursing have considerable human capacity and willingness to undertake health research. However they are constrained by limited research experience, training opportunities, research systems, physical infrastructure and access to resources. This brief commentary describes an 'Introduction to Health Research' workshop delivered at Atoifi Adventist Hospital in September 2009 and efforts to move from 'research workshop' to 'research work'. The Approach Using a participatory-action research approach underpinned by decolonising methodologies, staff from Atoifi Adventist Hospital and James Cook University (Queensland, Australia collaboratively designed, implemented and evaluated a health research workshop. Basic health research principles and methods were presented using active learning methodologies. Following the workshop, Atoifi Adventist Hospital and Atoifi College of Nursing staff, other professionals and community members reported an increased awareness and understanding of health research. The formation of a local Research Committee, improved ethics review procedures and the identification of local research mentors followed the week long workshop. The workshop has acted as a catalyst for research activity, increasing structural and human resource capacity for local health professionals and community leaders to engage in research. Discussion and Conclusions Participants from a variety of educational backgrounds participated in, and received benefit from, a responsive, culturally and linguistically accessible health research workshop. Improving health research systems at a remote hospital and aligning these with local and national research agendas is establishing a base to strengthen public health

  1. S3T working group. Report 1: group aims

    International Nuclear Information System (INIS)

    Pouey, M.

    1983-04-01

    The work group S3T which is aimed to designing and developing devices using unconventional holographic optics is presented. These devices find applications that are classified here in four items high resolution spectrometers, high definition imaging, high flux devices, metrology and interferometry. The problems to solve and the aims of the group in each of these cases are presented. Three synthesis of lectures are in this report. The main one concerns stigmatism conditions of concave holographic gratings used in normal incidence. This new process of focusing is very interesting for hot plasma diagnostics [fr

  2. Group work as an incentive for learning – students’ experiences of group work

    Directory of Open Access Journals (Sweden)

    Eva eHammar Chiriac

    2014-06-01

    Full Text Available Group work is used as a means for learning at all levels in educational systems. There is strong scientific support for the benefits of having students learning and working in groups. Nevertheless, studies about what occurs in groups during group work and which factors actually influence the students’ ability to learn is still lacking. Likewise, the question of why some group work is successful and other work results in the opposite is still unsolved. The aim of this article is to add to the current level of knowledge and understandings regarding the essence behind successful group work in higher education. This research is focused on the students’ experiences of group work and learning in groups, which is an almost non-existing aspect of research on group work prior to the beginning of the 21st century. A primary aim is to give university students a voice in the matter by elucidating the students’ positive and negative points of view and how the students assess learning when working in groups. Furthermore, the students’ explanations of why some group work ends up being a positive experience resulting in successful learning, while in other cases, the result is the reverse, are of interest. Data were collected through a study-specific questionnaire, with multiple choice and open-ended questions. The questionnaires were distributed to students in different study programs at two universities in Sweden. The present result is based on a reanalysis and qualitative analysis formed a key part of the study. The results indicate that most of the students’ experiences involved group work that facilitated learning, especially in the area of academic knowledge. Three important prerequisites (learning, study-social function and organization for group work that served as an effective pedagogy and as an incentive for learning were identified and discussed. All three abstractions facilitate or hamper students’ learning, as well as impact their

  3. Minutes of TOPEX/POSEIDON Science Working Team Meeting and Ocean Tides Workshop

    Science.gov (United States)

    Fu, Lee-Lueng (Editor)

    1995-01-01

    This third TOPEX/POSEIDON Science Working Team meeting was held on December 4, 1994 to review progress in defining ocean tide models, precision Earth orbits, and various science algorithms. A related workshop on ocean tides convened to select the best models to be used by scientists in the Geophysical Data Records.

  4. Working through a psychotherapy group's political cultures.

    Science.gov (United States)

    Ettin, Mark F; Cohen, Bertram D

    2003-10-01

    Macropolitical evolution, starting with authoritarian monarchism, has moved through anarchistic transitions either to the totalitarianism of fascism and communism or to liberal and social democracy. We posit analogous micropolitical development in process-oriented therapy groups: "dependence" and "counterdependence" corresponding to monarchism and anarchism; and "independence" and "interdependence" to liberal and social democracy, respectively. Transition from counterdependence to independence and interdependence may be: (1) facilitated through group members' cooperative experience of rebellion, or (2) blocked by collective identification, the internalization of dystopian or utopian fantasies that coalesce as "group-self" perceptions. We explore how group therapists work clinically with and through these several "political cultures" in the service of group and self transformation.

  5. Rethinking Engineering by Working Interdisciplinary in Groups

    NARCIS (Netherlands)

    Dr. J.B.F. van Zonneveld; Dr.Ir. Hay Geraedts

    1997-01-01

    In this paper we will describe and present the results of an experiment at the Fontys University of Professional Education in which engineering students work together with students from other disciplines in a multidisciplinary group at the end of their study on a real-life environmental problem

  6. Particle physics-astrophysics working group

    International Nuclear Information System (INIS)

    Cronin, J.W.; Kolb, E.W.

    1989-01-01

    The working group met each afternoon and listened to mini-symposia on a broad range of subjects covering all aspects of particle physics---astrophysics both theoretical and experimental. This paper reports that as a result, a number of papers which follow were commissioned to reflect the present status and future prospects of the field

  7. Scattering kernels and cross sections working group

    International Nuclear Information System (INIS)

    Russell, G.; MacFarlane, B.; Brun, T.

    1998-01-01

    Topics addressed by this working group are: (1) immediate needs of the cold-moderator community and how to fill them; (2) synthetic scattering kernels; (3) very simple synthetic scattering functions; (4) measurements of interest; and (5) general issues. Brief summaries are given for each of these topics

  8. Complex dynamics in supervised work groups

    Science.gov (United States)

    Dal Forno, Arianna; Merlone, Ugo

    2013-07-01

    In supervised work groups many factors concur to determine productivity. Some of them may be economical and some psychological. According to the literature, the heterogeneity in terms of individual capacity seems to be one of the principal causes for chaotic dynamics in a work group. May sorting groups of people with same capacity for effort be a solution? In the organizational psychology literature an important factor is the engagement in the task, while expectations are central in the economics literature. Therefore, we propose a dynamical model which takes into account both engagement in the task and expectations. An important lesson emerges. The intolerance deriving from the exposure to inequity may not be only caused by differences in individual capacities, but also by these factors combined. Consequently, solutions have to be found in this new direction.

  9. PM of the Vuotos working group

    International Nuclear Information System (INIS)

    Ojala, J.; Oikarinen, S.

    1995-01-01

    In the program for the Finnish Government will study the premises of the Vuotos Basin Project in the light of the most recent environment studies. For this purpose the Ministry of Trade and Industry appointed a working group. The working group has studied the latest reports on the Vuotos Project which were available up to 30 9.1995. The working group also updated the projections of the energy significance of the project and how it would affect employment. The working group arrived at these conclusions: The Vuotos Project is still of energy economy significance because the need for domestic energy production capacity - and also capacity that can be regulated - is on the rise. The project will not cause any fatal diminishing of the abundance of any Finnish plant or animal species, but it will diminish the number of habitants for some threatened plants and birds. Thus it will diminish the diversity of Finnish nature and the possibilities to use the area for many purposes. The project will cause the weakening of water quality in the streams beneath the basin for the first few years. The project is important for employment reasons, because it will diminish unemployment during construction by 2-8 %-units, depending on the county, and it will make the creation of new jobs possible in the long run. The working group thinks that estimates of experts concerning the pros and cons of the project are quite different and that the final weighing of the considerable body of research and reports can best be made at the Water Court proceedings. (author)

  10. Working Group on Virtual Data Integration

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-07

    This report is the outcome of a workshop commissioned by the U.S. Department of Energy’s (DOE) Climate and Environmental Sciences Division (CESD) to examine current and future data infrastructure requirements foundational for achieving CESD scientific mission goals in advancing a robust, predictive understanding of Earth’s climate and environmental systems.

  11. The Physics and Applications of High Brightness Beams: Working Group C Summary on Applications to FELS

    International Nuclear Information System (INIS)

    Nuhn, Heinz-Dieter

    2003-01-01

    This is the summary of the activities in working group C, ''Application to FELs,'' which was based in the Bithia room at the Joint ICFA Advanced Accelerator and Beam Dynamics Workshop on July 1-6, 2002 in Chia Laguna, Sardinia, Italy. Working group C was small in relation to the other working groups at that workshop. Attendees include Enrica Chiadroni, University of Rome ape with an identical pulse length. ''La Sapienza'', Luca Giannessi, ENEA, Steve Lidia, LBNL, Vladimir Litvinenko, Duke University, Patrick Muggli, UCLA, Alex Murokh, UCLA, Heinz-Dieter Nuhn, SLAC, Sven Reiche, UCLA, Jamie Rosenzweig, UCLA, Claudio Pellegrini, UCLA, Susan Smith, Daresbury Laboratory, Matthew Thompson, UCLA, Alexander Varfolomeev, Russian Research Center, plus a small number of occasional visitors. The working group addressed a total of nine topics. Each topic was introduced by a presentation, which initiated a discussion of the topic during and after the presentation. The speaker of the introductory presentation facilitated the discussion. There were six topics that were treated in stand-alone sessions of working group C. In addition, there were two joint sessions, one with working group B, which included one topic, and one with working group C, which included two topics. The presentations that were given in the joint sessions are summarized in the working group summary reports for groups B and D, respectively. This summary will only discuss the topics that were addressed in the stand-alone sessions, including Start-To-End Simulations, SASE Experiment, PERSEO, ''Optics Free'' FEL Oscillators, and VISA II

  12. [Group psychotherapy. Working team in community psychiatry].

    Science.gov (United States)

    Quevedo, J S; Barrera, E H

    1977-01-01

    A Community Psychiatry program was begun, based on the needs and requests of a clinic (this approach is restricted because there are institutional factors that only the institution can change). The work was aimed at sensitizing the beneficiaries and change clinic factors modifiable through operative group technique. When a great deal of every day stereotypes appeared, role playing was used: as a result, people in the clinic realized how they acted and how they asked from others behaviors that they themselves found difficult to show. As results, it was found that when workers were confronted with reality, desertion from operative groups appeared, with projection of problems (them, not me), great fear of change (fantasized in different ways), group passivity and the image of the institution, that the group saw as a persecutor.

  13. Summary from working group on noninterceptive diagnostics

    International Nuclear Information System (INIS)

    Chamberlin, D.D.

    1985-01-01

    The working group for noninterceptive diagnostics spent much of its time comparing diagnostic techniques from different fields and their possible application to high-power injectors. The group included backgrounds from electron beam diagnostics, fusion power diagnostics, cw ion source and transport design, and ion beam of diagnostics. The probability of success for adapting techniques from these different areas is quite difficult to judge, short of a detailed examination of each application. Unexpected flaws or unforeseen noise sources can eliminate an idea that would otherwise appear promising. The report presents several ideas that were discussed, with an indication of those ideas most likely to succeed if implemented

  14. Radiation Sources Working Group Summary Report

    International Nuclear Information System (INIS)

    Fazio, Michael V.

    1999-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

  15. Radiation Sources Working Group Summary Report

    International Nuclear Information System (INIS)

    Fazio, M.V.

    1999-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations. copyright 1999 American Institute of Physics

  16. International workshop of the Confinement Database and Modelling Expert Group in collaboration with the Edge and Pedestal Physics Expert Group

    International Nuclear Information System (INIS)

    Cordey, J.; Kardaun, O.

    2001-01-01

    A Workshop of the Confinement Database and Modelling Expert Group (EG) was held on 2-6 April at the Plasma Physics Research Center of Lausanne (CRPP), Switzerland. Presentations were held on the present status of the plasma pedestal (temperature and energy) scalings from an empirical and theoretical perspective. An integrated approach to modelling tokamaks incorporating core transport, edge pedestal and SOL, together with a model for ELMs was presented by JCT. New experimental data on on global H-mode confinement were discussed and presentations on L-H threshold power were made

  17. Abstracts of the 15. annual workshop of the Peatland Ecology Research Group (PERG) : peatland event 2008

    International Nuclear Information System (INIS)

    2008-01-01

    The Peatland Ecology Research Group (PERG) deals with the integrated sustainable management of Canadian peatlands, with projects involving the development of ecological restoration of peatland ecosystems after peat mining; reclamation of abandoned peatlands; hydrology, geochemistry, microbiology of natural, harvested and restored peatlands; peatland conservation strategies; and Sphagnum moss ecology and productivity. The Group has established a method for the re-establishing vegetation on mined peatlands. Research by PERG has initiated the development of global peatland conservation strategies. This workshop featured 35 presentations, of which 9 have been catalogued separately for inclusion in this database

  18. Report of the CP-violation working group

    International Nuclear Information System (INIS)

    Hoffman, C.M.

    1982-01-01

    The CP-Violation Working Group met twice during the workshop. A nice summary of our present knowledge of CP-violation was presented in the talk by Prof. James W. Cronin. In the final paragraph of his talk, Prof. Cronin argues that higher precision experiments studying CP-violation at LAMPF II will be extremely important no matter what additional knowledge we acquire in the time before LAMPF II is constructed. The crucial issue at present is to uncover the underlying mechanism responsible for CP-violation. The Working Group heard several talks aimed at reviewing the theoretical status of CP-violation and the directions that future experimental efforts might take. These talks included: Kaon Experiments at KEK, T. Yamazaki, University of Tokyo; Mechanisms for CP Violation, P. Herczeg, Los Alamos; and The Experimental Status of eta 00 Experiments, J.W. Cronin, Univ. of Chicago. There were also extended discussions on which experiments appear to be the most important and how to best perform these measurements. A summary of these discussions is given

  19. Group Organized Project Work in Distance Education

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten; Jensen, Lars Peter

    2001-01-01

    Project organized problem based learning is a successful concept for on-campus education at Aalborg University. Recently this "Aalborg concept" has been used in networked distance education as well. This paper describes the experiences from two years of Internet-mediated project work in a new...... Master of Information Technology education. The main conclusions are, that the project work is a strong learning motivator, enhancing peer collaboration, for off-campus students as well. However, the concept cannot be directly transferred to off-campus learning. The main reasons are that the students...... must communicate electronically, and that they are under a fierce time strain, studying part time and typically with a full time job and a family. In this paper, the main problems experienced with group organized project work in distance education are described, and some possible solutions are listed...

  20. Test Blanket Working Group's recent activities

    International Nuclear Information System (INIS)

    Vetter, J.E.

    2001-01-01

    The ITER Test Blanket Working Group (TBWG) has continued its activities during the period of extension of the EDA with a revised charter on the co-ordination of the development work performed by the Parties and by the JCT leading to a co-ordinated test programme on ITER for a DEMO-relevant tritium breeding blanket. This follows earlier work carried out until July 1998, which formed part of the ITER Final Design Report (FDR), completed in 1998. Whilst the machine parameters for ITER-FEAT have been significantly revised compared to the FDR, testing of breeding blanket modules remains a main objective of the test programme and the development of a reactor-relevant breeding blanket to ensure tritium fuel self-sufficiency is recognized a key issue for fusion. Design work and R and D on breeding blanket concepts, including co-operation with the other Contacting Parties of the ITER-EDA for testing these concepts in ITER, are included in the work plans of the Parties

  1. Cold moderator test facilities working group

    International Nuclear Information System (INIS)

    Bauer, Guenter S.; Lucas, A. T.

    1997-09-01

    The working group meeting was chaired by Bauer and Lucas.Testing is a vital part of any cold source development project. This applies to specific physics concept verification, benchmarking in conjunction with computer modeling and engineering testing to confirm the functional viability of a proposed system. Irradiation testing of materials will always be needed to continuously extend a comprehensive and reliable information database. An ever increasing worldwide effort to enhance the performance of reactor and accelerator based neutron sources, coupled with the complexity and rising cost of building new generation facilities, gives a new dimension to cold source development and testing programs. A stronger focus is now being placed on the fine-tuning of cold source design to maximize its effectiveness in fully exploiting the facility. In this context, pulsed spallation neutron sources pose an extra challenge due to requirements regarding pulse width and shape which result from a large variety of different instrument concepts. The working group reviewed these requirements in terms of their consequences on the needs for testing equipment and compiled a list of existing and proposed facilities suitable to carry out the necessary development work.

  2. FAVL work group: report and recommendations

    International Nuclear Information System (INIS)

    2011-01-01

    This document reports the works of a work group dedicated to the process of search for storage site for low activity and long life radioactive wastes. The authors recall the history of this process which started in the early 1990's, and resulted in the selection of two sites, in Auxon and in Pars-les-Chavanges, and finally in the withdrawal of both towns. Then, the authors analyse the whole process in terms of intervention or participation of local authorities, of information and participation of waste producers. They also discuss the roles of the ASN, IRSN, DGEC, ANDRA and ANDRA's Coesdic. They make recommendations regarding site selection, agenda, responsibilities, preferential representative at the local level, public information, consultation, and project support

  3. Working group report on hadrons in the nuclear medium

    Energy Technology Data Exchange (ETDEWEB)

    Ent, R. [CEBAF, Newport News, VA (United States); Milner, R.G. [Masachusetts Inst. of Technology, Cambridge, MA (United States)

    1994-04-01

    This working group focussed on the subject of hadrons in the nuclear medium. It encompassed both the understanding of the nucleus itself in terms of its binding and its structure, and the use of the nucleus as a medium to probe QCD and the structure of hadrons. Both aspects were addressed during the workshop, though the emphasis tended towards the latter. Almost inescapably this working group had some overlap with the other working groups, as the nucleus can also be used as a medium to probe the production and structure of vector mesons. Also, inclusive and semi-inclusive processes can be used as a probe of nuclear effects, for instance in the case of deep-inelastic scattering for x > 1. In this summary report the authors will try to restrict themselves to only those issues where the nuclear medium is important. To increase their understanding of the nucleus in terms of its binding and structure, they would like to know the effect of a dense nuclear medium on a nucleon, to know the non-nucleonic degrees of freedom needed to describe a nuclear system, and to understand the implications of the fact that a bound nucleon is necessarily off its mass-shell. The results of many lepton scattering experiments during the last two decades have raised these questions, but at this moment there are no definitive answers. The hope is that the well-known electron probe, with sufficient energy to probe the short-range properties of nuclei, can provide insight. Especially, the authors would like a conclusive answer to the question if, and to what extent, quark degrees of freedom are necessary to describe a nuclear system.

  4. Working group report on hadrons in the nuclear medium

    International Nuclear Information System (INIS)

    Ent, R.; Milner, R.G.

    1994-01-01

    This working group focussed on the subject of hadrons in the nuclear medium. It encompassed both the understanding of the nucleus itself in terms of its binding and its structure, and the use of the nucleus as a medium to probe QCD and the structure of hadrons. Both aspects were addressed during the workshop, though the emphasis tended towards the latter. Almost inescapably this working group had some overlap with the other working groups, as the nucleus can also be used as a medium to probe the production and structure of vector mesons. Also, inclusive and semi-inclusive processes can be used as a probe of nuclear effects, for instance in the case of deep-inelastic scattering for x > 1. In this summary report the authors will try to restrict themselves to only those issues where the nuclear medium is important. To increase their understanding of the nucleus in terms of its binding and structure, they would like to know the effect of a dense nuclear medium on a nucleon, to know the non-nucleonic degrees of freedom needed to describe a nuclear system, and to understand the implications of the fact that a bound nucleon is necessarily off its mass-shell. The results of many lepton scattering experiments during the last two decades have raised these questions, but at this moment there are no definitive answers. The hope is that the well-known electron probe, with sufficient energy to probe the short-range properties of nuclei, can provide insight. Especially, the authors would like a conclusive answer to the question if, and to what extent, quark degrees of freedom are necessary to describe a nuclear system

  5. Activities of covariance utilization working group

    International Nuclear Information System (INIS)

    Tsujimoto, Kazufumi

    2013-01-01

    During the past decade, there has been a interest in the calculational uncertainties induced by nuclear data uncertainties in the neutronics design of advanced nuclear system. The covariance nuclear data is absolutely essential for the uncertainty analysis. In the latest version of JENDL, JENDL-4.0, the covariance data for many nuclides, especially actinide nuclides, was substantialy enhanced. The growing interest in the uncertainty analysis and the covariance data has led to the organisation of the working group for covariance utilization under the JENDL committee. (author)

  6. Report of ITER Special Working Group 2

    International Nuclear Information System (INIS)

    Roberts, M.

    1994-01-01

    ITER Special Working Group 2 (SWG-2) was established by the terms of the ITER-EDA Agreement. According to that agreement, open-quotes SWG-2 shall submit guidelines for implementation of task assignments by the Home Teams to the Council for approval at its second meeting. This SWG shall also draft Protocol 2 to the ITER-EDA Agreement and submit a draft to the Council not later than by 21 May 1993.close quotes The members of SWG-2 for Protocol 2 drafting are listed. The rest of this paper is the verbatim report of SWG-2 on Protocol 2

  7. Establishing Ozone Critical Levels II. UNECE Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Per Erik; Sellden, Gun; Pleijel, Haakan [eds.

    2003-06-01

    This document is the final report from the workshop. It contains the overall summary of the conclusions from the workshop, the reports from the three working groups that were active during the workshop as well as all background papers presented at the workshop.

  8. Summary -- Experiments with Radioactive Beams Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, D.J. [Los Alamos National Lab., NM (United States); Wiescher, M. [Notre Dame Univ., IN (United States)

    1992-12-31

    During the course of the workshop, a wide range of futuristic radioactive-beam experiments were discussed. These extended from the study of electroweak interactions in nuclei to materials science, nuclear astrophysics, and a host of nuclear physics investigations. Emphasis was placed on illustrating how these prototypical experiments could be done, discussing what types of detection systems would be needed, exploring the new problems which would be confronting the radioactive beam experimenter, and better defining the beam requirements. Contained herein is a summary of these discussions.

  9. IAEA Workshop (Training Course) on Codes and Standards for Sodium Cooled Fast Reactors. Working Material

    International Nuclear Information System (INIS)

    2010-01-01

    The training course consisted of lectures and Q&A sessions. The lectures dealt with the history of the development of Design Codes and Standards for Sodium Cooled Fast Reactors (SFRs) in the respective country, the detailed description of the current design Codes and Standards for SFRs and their application to ongoing Fast Reactor design projects, as well as the ongoing development work and plans for the future in this area. Annex 1 contains the detailed Workshop program

  10. The recommendations of the noise working group

    International Nuclear Information System (INIS)

    Legerton, M.L.

    1997-01-01

    In 1993 the DTI set up a Working Group to define a framework which can be used to measure and rate the noise from wind turbines. The final report of the Noise Working Group is now available for publication. The advice on the setting of noise limits for wind farms is largely unaltered from the preliminary recommendations presented at the 17th BWEA Annual Conference [1]. This paper recaps on those recommendations and provides additional information on the measurement procedures to be used with the recommendations on noise limits. The paper describes the measurement of the existing background noise climate on which the limits are based and the procedure to be used for the measurement of turbine noise levels in the investigation of complaints. The noise limits are rated noise levels in that they can include a penalty for tones present in the noise. The level of penalty depends upon the audibility of the tone and measurement procedure for determining audibility and the associated penalty system are also described. (author)

  11. NASA's Internal Space Weather Working Group

    Science.gov (United States)

    St. Cyr, O. C.; Guhathakurta, M.; Bell, H.; Niemeyer, L.; Allen, J.

    2011-01-01

    Measurements from many of NASA's scientific spacecraft are used routinely by space weather forecasters, both in the U.S. and internationally. ACE, SOHO (an ESA/NASA collaboration), STEREO, and SDO provide images and in situ measurements that are assimilated into models and cited in alerts and warnings. A number of years ago, the Space Weather laboratory was established at NASA-Goddard, along with the Community Coordinated Modeling Center. Within that organization, a space weather service center has begun issuing alerts for NASA's operational users. NASA's operational user community includes flight operations for human and robotic explorers; atmospheric drag concerns for low-Earth orbit; interplanetary navigation and communication; and the fleet of unmanned aerial vehicles, high altitude aircraft, and launch vehicles. Over the past three years we have identified internal stakeholders within NASA and formed a Working Group to better coordinate their expertise and their needs. In this presentation we will describe this activity and some of the challenges in forming a diverse working group.

  12. Summary Report of Working Group 2: Computation

    International Nuclear Information System (INIS)

    Stoltz, P. H.; Tsung, R. S.

    2009-01-01

    The working group on computation addressed three physics areas: (i) plasma-based accelerators (laser-driven and beam-driven), (ii) high gradient structure-based accelerators, and (iii) electron beam sources and transport [1]. Highlights of the talks in these areas included new models of breakdown on the microscopic scale, new three-dimensional multipacting calculations with both finite difference and finite element codes, and detailed comparisons of new electron gun models with standard models such as PARMELA. The group also addressed two areas of advances in computation: (i) new algorithms, including simulation in a Lorentz-boosted frame that can reduce computation time orders of magnitude, and (ii) new hardware architectures, like graphics processing units and Cell processors that promise dramatic increases in computing power. Highlights of the talks in these areas included results from the first large-scale parallel finite element particle-in-cell code (PIC), many order-of-magnitude speedup of, and details of porting the VPIC code to the Roadrunner supercomputer. The working group featured two plenary talks, one by Brian Albright of Los Alamos National Laboratory on the performance of the VPIC code on the Roadrunner supercomputer, and one by David Bruhwiler of Tech-X Corporation on recent advances in computation for advanced accelerators. Highlights of the talk by Albright included the first one trillion particle simulations, a sustained performance of 0.3 petaflops, and an eight times speedup of science calculations, including back-scatter in laser-plasma interaction. Highlights of the talk by Bruhwiler included simulations of 10 GeV accelerator laser wakefield stages including external injection, new developments in electromagnetic simulations of electron guns using finite difference and finite element approaches.

  13. Annual report of the Summit Members' Working Group on Controlled Thermonuclear Fusion (Fusin Working Group (FWG))

    International Nuclear Information System (INIS)

    1987-04-01

    The Summit Members' Working Group on Controlled Thermonuclear Fusion [Fusion Working Group (FWG)] was established in 1983 in response to the Declaration of the Heads of State and Government at the Versailles Economic Summit meeting of 1982, and in response to the subsequent report of the Working Group in Technology, Growth and Employment (TGE) as endorsed at the Williamsburg Summit meeting, 1983. This document contains the complete written record of each of the three FWG meetings which include the minutes, lists of attendees, agendas, statements, and summary conclusions as well as the full reports of the Technical Working Party. In addition, there is a pertinent exchange of correspondence between FWG members on the role of the Technical Working Party and a requested background paper on the modalities associated with a possible future ETR project

  14. Working Group Report: Lattice Field Theory

    Energy Technology Data Exchange (ETDEWEB)

    Blum, T.; et al.,

    2013-10-22

    This is the report of the Computing Frontier working group on Lattice Field Theory prepared for the proceedings of the 2013 Community Summer Study ("Snowmass"). We present the future computing needs and plans of the U.S. lattice gauge theory community and argue that continued support of the U.S. (and worldwide) lattice-QCD effort is essential to fully capitalize on the enormous investment in the high-energy physics experimental program. We first summarize the dramatic progress of numerical lattice-QCD simulations in the past decade, with some emphasis on calculations carried out under the auspices of the U.S. Lattice-QCD Collaboration, and describe a broad program of lattice-QCD calculations that will be relevant for future experiments at the intensity and energy frontiers. We then present details of the computational hardware and software resources needed to undertake these calculations.

  15. Executive Committee Working Group: Women in Astronomy

    Science.gov (United States)

    Primas, Francesca; Maddison, Sarah; Primas, Francesca; Aerts, Conny; Clayton, Geoffrey; Combes, Françoise; Elmegreen, Debra; Feretti, Luigina; Jog, Chanda; Kobayashi, Chiaki; Lazzaro, Daniela; Liang, Yanchun; Mandrini, Cristina; Mathews, Brenda; Rovira, Marta

    2016-04-01

    The gender† dimension of science and technology has become one of the most important and debated issues worldwide, impacting society at every level. A variety of international initiatives on the subject have been undertaken, including the continued monitoring of the status of women in science by Unesco Institute for Statistics (UIS) or the annual reports ``Education at a Glance'' by the Organization for Economic Co-operation and Development (OECD) as well as field-related working groups and networking in order to collect data in a consistent manner. The majority of the international organizations have made clear statements about their discrimination policies (independently of their main field(s) of action), including the International Council for Science whose regulations are followed by the IAU. Gender equality at large is one of the eight United Nations Millennium Development Goals, which clearly calls for action related to science, technology and gender.

  16. Faculty Development for Small-Group-Teaching with Simulated Patients (SP) - Design and Evaluation of a Competency-based Workshop.

    Science.gov (United States)

    Hölzer, Henrike; Freytag, Julia; Sonntag, Ulrike

    2017-01-01

    Objective: The introduction of innovative teaching formats and methods in medical education requires a specific didactic training for teachers to use complicated formats effectively. This paper describes preliminary considerations, design, implementation and evaluation of a skills-based workshop (7,5 hours long) for teaching with simulated patients. The aim is to describe the essential components for a lasting effect of the workshop so that the concept can be adapted to other contexts. Method: We present the theoretical framework, the objectives, the didactic methodology and the implementation of the workshop. The evaluation of the workshop was carried out using questionnaires. First the participants (teachers of the faculty of medicine, clinical and science subjects) were asked to estimate how well they felt prepared for small group teaching immediately after workshop. Later, after some teaching experience of their own, they gave feedback again as a part of the general evaluation of the semester. Results: In the course of three years 27 trainings were conducted and evaluated with a total of 275 participants. In the context of semester evaluation 452 questionnaires were evaluated on the quality of training. Conclusion: The evaluation shows that participants appreciate the concept of the workshop and also feel sufficiently well prepared. As a limitation it must be said that this is so far only the lecturers' self-assessment. Nevertheless, it can be stated that even a one-day workshop with a stringent teaching concept shows long term results regarding innovative teaching methods.

  17. Charter for Systems Engineer Working Group

    Science.gov (United States)

    Suffredini, Michael T.; Grissom, Larry

    2015-01-01

    This charter establishes the International Space Station Program (ISSP) Mobile Servicing System (MSS) Systems Engineering Working Group (SEWG). The MSS SEWG is established to provide a mechanism for Systems Engineering for the end-to-end MSS function. The MSS end-to-end function includes the Space Station Remote Manipulator System (SSRMS), the Mobile Remote Servicer (MRS) Base System (MBS), Robotic Work Station (RWS), Special Purpose Dexterous Manipulator (SPDM), Video Signal Converters (VSC), and Operations Control Software (OCS), the Mobile Transporter (MT), and by interfaces between and among these elements, and United States On-Orbit Segment (USOS) distributed systems, and other International Space Station Elements and Payloads, (including the Power Data Grapple Fixtures (PDGFs), MSS Capture Attach System (MCAS) and the Mobile Transporter Capture Latch (MTCL)). This end-to-end function will be supported by the ISS and MSS ground segment facilities. This charter defines the scope and limits of the program authority and document control that is delegated to the SEWG and it also identifies the panel core membership and specific operating policies.

  18. Subjectification in the education of pedagogues : the knowledgeing work-shop

    DEFF Research Database (Denmark)

    Rothuizen, Jan Jaap

    between theory and practice. That implies a personal responsibility and the ability to engage in ethical relationships. In my research I focus on three aspects: - A reading of the evaluations, reactions on those evaluations and steering-documents that are elaborated in relation to this education...... objectivism and relativism: a knowledgeing work-shop / researching lived experience with students. We work with narratives . The intervention is interpreted in relation to the question of subjectification and the transformative learning that is a part of it....

  19. Les Houches 2011: Physics at TeV Colliders New Physics Working Group Report

    Energy Technology Data Exchange (ETDEWEB)

    Brooijmans, G.; et al.

    2012-03-01

    We present the activities of the 'New Physics' working group for the 'Physics at TeV Colliders' workshop (Les Houches, France, 30 May-17 June, 2011). Our report includes new agreements on formats for interfaces between computational tools, new tool developments, important signatures for searches at the LHC, recommendations for presentation of LHC search results, as well as additional phenomenological studies.

  20. Summary report of working group 5: Beam sources, monitoring and control

    Science.gov (United States)

    Conde, Manoel; Zgadzaj, Rafal

    2017-03-01

    This paper summarizes the topics presented in Working Group 5 at the 17th Advanced Accelerator Concepts Workshop, which was held from 31 July to 5 August 2016 at the Gaylord Hotel and Conference Center, National Harbor, MD, USA. The presentations included a variety of topics covering cathode and RF gun design, new user facilities, beam phase space manipulation, and a range of novel diagnostic techniques.

  1. ''High intensity per bunch'' working group

    International Nuclear Information System (INIS)

    2001-01-01

    Third Generation Light Sources are supposed to store high intensity beams not only in many tightly spaced bunches (multibunch operation), but also in few bunch or even single lunch modes of operation, required for example for time structure experiments. Single bunch instabilities, driven by short-range wake fields, however spoil the beam quality, both longitudinally and transversely. Straightforward ways of handling them, by pushing up the chromaticity (ζ = ΔQ/(Δp/p)) for example, enabled to raise the charge per bunch, but to the detriment of beam lifetime. In addition, since the impedance of the vacuum chamber deteriorates with the installation of new insertion devices, the current thresholds tend to dope down continuously. The goal of this Working Group was then to review these limitations in the existing storage rings, where a large number of beam measurements have been performed to characterise them, and to discuss different strategies which are used against them. About 15 different laboratories reported on the present performance of storage rings, experiences gained in high charge per bunch, and on simulation results and theoretical studies. More than 25 presentations addressed the critical issues and stimulated the discussion. Four main topics came out: - Observation and experimental data; - Impedance studies and tracking codes; - Theoretical investigations; - Cures and feedback. (author)

  2. Working group report on wetlands and wildlife

    International Nuclear Information System (INIS)

    Teels, B.

    1991-01-01

    The results and conclusions of a working group held to discuss the state of knowledge and knowledge gaps concerning climatic change impacts on wetlands and wildlife are presented. Prairie pothole wetlands are extremely productive and produce ca 50% of all ducks in North America. The most productive, and most vulnerable to climate change, are small potholes, often less than one acre in area. Changes in water regimes and land use will have more impact on wildlife than changes in temperature. There are gaps in knowledge relating to: boreal wetlands and their wildlife, and response to climate; wetland inventories that include the smallest wetlands; coordinated schemes for monitoring status and trends of wetlands and wildlife; and understanding of ecological relationships within wetlands and their wildlife communities. Recommendations include: coordinate and enhance existing databases to provide an integrated monitoring system; establish research programs to increase understanding of ecological relationships within wetland ecosystems; evaluate programs and policies that affect wetlands; and promote heightened public awareness of general values of wetlands

  3. Beam-beam interaction working group summary

    International Nuclear Information System (INIS)

    Siemann, R.H.

    1995-01-01

    The limit in hadron colliders is understood phenomenologically. The beam-beam interaction produces nonlinear resonances and makes the transverse tunes amplitude dependent. Tune spreads result from the latter, and as long as these tune spreads do not overlap low order resonances, the lifetime and performance is acceptable. Experience is that tenth and sometimes twelfth order resonances must be avoided, and the hadron collider limit corresponds roughly to the space available between resonances of that and lower order when operating near the coupling resonance. The beam-beam interaction in e + e - colliders is not understood well. This affects the performance of existing colliders and could lead to surprises in new ones. For example. a substantial amount of operator tuning is usually required to reach the performance limit given above, and this tuning has to be repeated after each major shutdown. The usual interpretation is that colliding beam performance is sensitive to small lattice errors, and these are being reduced during tuning. It is natural to ask what these errors are, how can a lattice be characterized to minimize tuning time, and what aspects of a lattice should receive particular attention when a new collider is being designed. The answers to this type of question are not known, and developing ideas for calculations, simulations and experiments that could illuminate the details of the beam-beam interaction was the primary working group activity

  4. Working group report on water resources

    International Nuclear Information System (INIS)

    Baulder, J.

    1991-01-01

    The results and conclusions of a working group held to discuss climate change implications for water resources are presented. The existing water resources and climatological databases necessary to develop models and functional relationships lack integration and coordination. The density and spatial distribution of the existing sampling networks for obtaining necessary climatological data is inadequate, especially in areas of complex terrain, notably higher elevations in the Rocky Mountains. Little information and knowledge is available on potential socio-economic responses that can be anticipated from either increases in climate variability or major change. Recommended research initiatives include the following. Basic functional relationships between climatic events, climatic variability and change, and both surface and groundwater hydrologic processes need to be investigated and improved. Basin-scale and regional-scale climatic models need to be developed, tested, and interfaced with existing global climate models. Public sector attitudes to water management issues and opportunities need to be investigated, and integrated scientific, socio-economic, multidisciplinary, regional databases on climatic change and variability and associated processes need to be developed

  5. International Space Station Earth Observations Working Group

    Science.gov (United States)

    Stefanov, William L.; Oikawa, Koki

    2015-01-01

    The multilateral Earth Observations Working Group (EOWG) was chartered in May 2012 in order to improve coordination and collaboration of Earth observing payloads, research, and applications on the International Space Station (ISS). The EOWG derives its authority from the ISS Program Science Forum, and a NASA representative serves as a permanent co-chair. A rotating co-chair position can be occupied by any of the international partners, following concurrence by the other partners; a JAXA representative is the current co-chair. Primary functions of the EOWG include, 1) the exchange of information on plans for payloads, from science and application objectives to instrument development, data collection, distribution and research; 2) recognition and facilitation of opportunities for international collaboration in order to optimize benefits from different instruments; and 3) provide a formal ISS Program interface for collection and application of remotely sensed data collected in response to natural disasters through the International Charter, Space and Major Disasters. Recent examples of EOWG activities include coordination of bilateral data sharing protocols between NASA and TsNIIMash for use of crew time and instruments in support of ATV5 reentry imaging activities; discussion of continued use and support of the Nightpod camera mount system by NASA and ESA; and review and revision of international partner contributions on Earth observations to the ISS Program Benefits to Humanity publication.

  6. Neutron radiography working group test programme

    International Nuclear Information System (INIS)

    Domanus, J.C.

    1989-03-01

    Scope and results of the Euratom Neutron Radiography Working Group Test Program are described. Seven NR centers from six European Community countries have performed this investigation using eleven NR facilities. Four test items were neutron radiographed using 30 different film/converter combinations. From film density measurements neutron beam components were determined. Radiographic sensitivity was assessed from visual examinations of the radiographs. About 25,000 dimensional measurements were made and were used for the assessment of accuracies of dimensional measurements from neutron radiographs. The report gives a description of the test items used for the Test Program, the film density and dimensional measurements, and concentrates on the assessment of the measuring results. The usefulness of the beam purity and sensitivity indicators was assessed with the conclusion that they are not suitable for neutron radiography of nuclear reactor fuel. Ample information is included in the report about measuring accuracies which can be reached in dimensional measurements of fuel pins. After a general comparison of measuring accuracies is discussed. Results from different NR facilities are treated separately as are the different kinds of dimensions of the fuel pins. Finally human and instrument factors are discussed. After presenting final conclusions (which take into account the above-mentioned factors) results of other investigations about dimensional measurements are shortly reviewed

  7. Working group written presentation: Atomic oxygen

    International Nuclear Information System (INIS)

    Leger, L.J.; Visentine, J.T.

    1989-01-01

    Earlier Shuttle flight experiments have shown NASA and SDIO spacecraft designed for operation in low-Earth orbit (LEO) must take into consideration the highly oxidative characteristics of the ambient flight environment. Materials most adversely affected by atomic oxygen interactions include organic films, advanced (carbon-based) composites, thermal control coatings, organic-based paints, optical coatings, and thermal control blankets commonly used in spacecraft applications. Earlier results of NASA flight experiments have shown prolonged exposure of sensitive spacecraft materials to the LEO environment will result in degraded systems performance or, more importantly, lead to requirements for excessive on-orbit maintenance, with both conditions contributing significantly to increased mission costs and reduced mission objectives. Flight data obtained from previous Space Shuttle missions and results of the Solar Max recovery mission are limited in terms of atomic oxygen exposure and accuracy of fluence estimates. The results of laboratory studies to investigate the long-term (15 to 30 yrs) effects of AO exposure on spacecraft surfaces are only recently available, and qualitative correlations of laboratory results with flight results have been obtained for only a limited number of materials. The working group recommended the most promising ground-based laboratories now under development be made operational as soon as possible to study the full-life effects of atomic oxygen exposure on spacecraft systems

  8. TAP Report - Southwest Idaho Juniper Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Gresham, Garold Linn [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    There is explicit need for characterization of the materials for possible commercialization as little characterization data exists. Pinyon-juniper woodlands are a major ecosystem type found in the Southwest and the Intermountain West regions of the United States including Nevada, Idaho and Oregon. These widespread ecosystems are characterized by the presence of several different species of pinyon and juniper as the dominant plant cover. Since the 1800s, pinyon-juniper woodlands have rapidly expanded their range at the expense of existing ecosystems. Additionally, existing woodlands have become denser, progressively creating potential fire hazards as seen in the Soda Fire, which burned more than 400 sq. miles. Land managers responsible for these areas often desire to reduce pinyon-juniper coverage on their lands for a variety of reasons, as stated in the Working Group objectives. However, the cost of clearing thinning pinyon-juniper stands can be prohibitive. One reason for this is the lack of utilization options for the resulting biomass that could help recover some of the cost of pinyon-juniper stand management. The goal of this TAP effort was to assess the feedstock characteristics of biomass from a juniper harvested from Owyhee County to evaluate possible fuel and conversion utilization options.

  9. Working with Group-Tasks and Group Cohesiveness

    Science.gov (United States)

    Anwar, Khoirul

    2016-01-01

    This study aimed at exploring the connection between the use of group task and group cohesiveness. This study is very important because the nature of the learner's success is largely determined by the values of cooperation, interaction, and understanding of the learning objectives together. Subjects of this study are 28 students on the course…

  10. Working Group on Virtual Data Integration

    Energy Technology Data Exchange (ETDEWEB)

    Williams, D. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Palanisamy, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); van Dam, K. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-02-04

    This report is the outcome of a workshop commissioned by the U.S. Department of Energy’s (DOE) Climate and Environmental Sciences Division (CESD) to examine current and future data infrastructure requirements foundational for achieving CESD scientific mission goals in advancing a robust, predictive understanding of Earth’s climate and environmental systems. Over the past several years, data volumes in CESD disciplines have risen sharply to unprecedented levels (tens of petabytes). Moreover, the complexity and diversity of this research data— including simulations, observations, and reanalysis— have grown significantly, posing new challenges for data capture, storage, verification, analysis, and integration. With the trends of increased data volume (in the hundreds of petabytes), more complex analysis processes, and growing cross-disciplinary collaborations, it is timely to investigate whether the CESD community has the computational and data support needed to fully realize the scientific potential of its data collections. In recognition of the challenges, a partnership is forming across CESD and among national and international agencies to examine the viability of creating an integrated, collaborative data infrastructure: a Virtual Laboratory. The overarching goal of this report is to identify the community’s key data technology requirements and high-priority development needs for sustaining and growing its scientific discovery potential. The report also aims to map these requirements to existing solutions and to identify gaps in current services, tools, and infrastructure that will need to be addressed in the short, medium, and long term to advance scientific progress.

  11. Group work is political work: a feminist perspective of interpersonal group psychotherapy.

    Science.gov (United States)

    Bender, A; Ewashen, C

    2000-01-01

    When practicing as group leaders, mental health nurses often incorporate Irvin Yalom's (1995, 1998) concepts of social microcosm and here-and-now. This article examines these concepts from a feminist perspective and offers an approach to group psychotherapy that processes gender issues and fosters collective consciousness-raising. A feminist perspective in group therapy challenges us to view the social microcosm as a reenactment of sociopolitical contexts and the here-and-now as a medium for developing personal and social responsibility. Therapy is not only about individual and interpersonal change in group members, but is an opportunity for healthy social change. Therapy becomes political work, raising the social consciousness of each participant as well as the group as a whole.

  12. Analysis of Work Assignments After Medical Ethics Workshop for First-Year Residents at Siriraj Hospital

    Directory of Open Access Journals (Sweden)

    Sakda Sathirareuangchai

    2016-11-01

    Full Text Available Background: Upon entering the residency training program, all 1st year residents at Siriraj Hospital must join medical ethics workshop held by the Division of Postgraduate Studies. At the end of the workshop, the residents were given a work assignment to write a clinical ethics situation they have encountered in their past practice. Methods: This study is an analysis of content described in the work assignments in order to gain the information regarding common medical ethics dilemmas, which the physicians faced in the early days of practice. Results: 740 work assignments were reviewed. The 4 most common ethical principle mentioned in these assign- ments were autonomy (144, 19.5%, palliative care (133, 18.0%, beneficence (121, 16.4%, and confidentiality (110, 14.9%. More than half of the situations described were during their internship (474, 64.1% and tended to distributed equally among community hospital (39.1%, university hospital (28.0%, and general hospital (24.3%. Conclusion: This study should raise the awareness of the medical educator towards these medical ethics issues during curriculum planning.

  13. Group Chaos Theory: A Metaphor and Model for Group Work

    Science.gov (United States)

    Rivera, Edil Torres; Wilbur, Michael; Frank-Saraceni, James; Roberts-Wilbur, Janice; Phan, Loan T.; Garrett, Michael T.

    2005-01-01

    Group phenomena and interactions are described through the use of the chaos theory constructs and characteristics of sensitive dependence on initial conditions, phase space, turbulence, emergence, self-organization, dissipation, iteration, bifurcation, and attractors and fractals. These constructs and theoretical tenets are presented as applicable…

  14. 75 FR 34476 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2010-06-17

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Management Work Group. The purpose of the Adaptive Management Work Group is to advise and to provide... of the Glen Canyon Dam Adaptive Management Work Group is in the public interest in connection with...

  15. and collider physics: Working group report

    Indian Academy of Sciences (India)

    Theory Group, Physical Research Laboratory, Navrangpura, Ahmedabad 380 ... One such is anomaly mediation, wherein there is no tree level coupling ..... The role of the spectator quarks effect in the inclusive beauty decays were studied.

  16. Information behavior in dynamic group work contexts

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Pierce, Linda G.

    2000-01-01

    personnel and documentation on C2. During data analysis, three important themes that highlight the why, what, how and consequences of information behavior in C2 emerged. The first is the concept of interwoven situational awareness consisting of individual, intragroup and intergroup shared understanding...... of the situation. Interwoven situational awareness appears to facilitate response to dynamic, constraint-bound situations. The second theme describes the need for dense social networks or frequent communication between participants about the work context and situation, the work process and domain...

  17. HIDE working groups. A. Synchrotron based system

    International Nuclear Information System (INIS)

    Barton, M.Q.

    1977-01-01

    A summary is given of a week's discussions on an ion source to target scenario for a synchrotron for heavy ion fusion. Topics considered include: the number of beams on the target; beam dynamics; and a number of areas explicitly identified as needing further work

  18. Using collage art work as a common medium for communication in interprofessional workshops.

    Science.gov (United States)

    Williams, Brandon

    2002-02-01

    This paper explores the notion that interprofessional working is often hampered by the lack of a common language set and the variety of language sets used across the caring professions. The use of art as a common ground communication tool is presented with particular reference to the medium of magazine picture collage work. The paper describes how the use of this medium can enhance the understanding of individuals in interprofessional study days and workshops, where particular issues can be presented and explored by the participants, resulting in the increased awareness of the different perceptions of shared issues. In this way the use of magazine picture collage is advocated as a communication tool aimed to build bridges across the range of language sets used by different professionals.

  19. From birth to adolescence: Vienna 2005 European Childhood Obesity Group International Workshop.

    Science.gov (United States)

    Pietrobelli, A; Flodmark, C E; Lissau, I; Moreno, L A; Widhalm, K

    2005-09-01

    In the last 15 y there has been a tremendous increase in the number of studies on pediatric obesity looking at epidemiology, health-related risks, etiology, methodology and treatment. During the early 1990s, the European Childhood Obesity Group (ECOG) was born as a group of scientists' expert in the field of pediatric obesity. ECOG this year celebrates the approach to early maturity with an excited and omni-comprehensive program developing through eight different tracks. Comments on different 'key' papers in each of the eight tracks. The eight tracks were (1) Nutrition requirements and food habits, (2) physical activity, (3) prevention and political actions/strategies, (4) diabetes, (5) metabolism, (6) psychology, (7) pathology, and (8) treatment with emphasis on drugs. Looking at the overall picture of the ECOG workshop we could conclude that despite the fact that childhood obesity is a crisis facing worldwide youth, it is necessary that action to control it must be taken now. All the six relevant levels (ie, family, schools, health professionals, government, industry and media) could be involved in prevention of child and adolescent obesity.

  20. AER Working Group B activities in 2009

    International Nuclear Information System (INIS)

    Darilek, P.

    2009-01-01

    Regular meeting of Core Design Group was organized by SKODA JS a.s. in Plzen (Czech Republic) during the period of 4 to 6 May 2009. There were presented altogether 17 participants from 7 member organizations and 7 presentations were read. Presented papers covered topics as follows: 1) Two presentations dealt with upgrade of calculation and display tools. 2) Three presentations were devoted to benchmark calculations. 3) Two presentations informed about gradual improvement of fuel assembly and cycle for VVER-440 reactors

  1. Working Group Report: Dark Energy and CMB

    Energy Technology Data Exchange (ETDEWEB)

    Dodelson, S.; Honscheid, K.; Abazajian, K.; Carlstrom, J.; Huterer, D.; Jain, B.; Kim, A.; Kirkby, D.; Lee, A.; Padmanabhan, N.; Rhodes, J.; Weinberg, D.

    2013-09-20

    The American Physical Society's Division of Particles and Fields initiated a long-term planning exercise over 2012-13, with the goal of developing the community's long term aspirations. The sub-group "Dark Energy and CMB" prepared a series of papers explaining and highlighting the physics that will be studied with large galaxy surveys and cosmic microwave background experiments. This paper summarizes the findings of the other papers, all of which have been submitted jointly to the arXiv.

  2. Working group on VVER safety analysis - report of the 2010 meeting

    International Nuclear Information System (INIS)

    Kliem, S.

    2010-01-01

    The AER Working Group D on WWER reactor safety analysis held its nineteenth meeting in Pisa, Italy, during the period 15-16 April, 2010. The meeting was hosted by the San Piero a Grado Nuclear Research Group of the University of Pisa and was held in conjunction with the second workshop on the OECD/NEA Benchmark for the Kalinin-3 WWER-1000 NPP and the fourth workshop on the OECD Benchmark for Uncertainty Analysis in Best-Estimate Modelling (UAM) for Design, Operation and Safety Analysis of LWRs. Altogether 12 participants attended the meeting of the working group D, 8 from AER member organizations and 4 guests from non-member organization. The co-ordinator of the working group, Mr. S. Kliem, served as chairman of the meeting. The meeting started with a general information exchange about the recent activities in the participating organizations. The given presentations and the discussions can be attributed to the following topics:-Code validation and benchmarking including the calculation of the OECD/NEA Benchmark for the Kalinin-3 WWER-1000 NPP;-Safety analyses and code developments;-Future activities A list of the participants and a list of the handouts distributed at the meeting are attached to the report. The corresponding PDF-files can be obtained from the chairman. (Author)

  3. The QCD/SM Working Group: Summary Report

    International Nuclear Information System (INIS)

    Dobbs, M.

    2004-01-01

    Among the many physics processes at TeV hadron colliders, we look most eagerly for those that display signs of the Higgs boson or of new physics. We do so however amid an abundance of processes that proceed via Standard Model (SM) and in particular Quantum Chromodynamics (QCD) interactions, and that are interesting in their own right. Good knowledge of these processes is required to help us distinguish the new from the known. Their theoretical and experimental study teaches us at the same time more about QCD/SM dynamics, and thereby enables us to further improve such distinctions. This is important because it is becoming increasingly clear that the success of finding and exploring Higgs boson physics or other New Physics at the Tevatron and LHC will depend significantly on precise understanding of QCD/SM effects for many observables. To improve predictions and deepen the study of QCD/SM signals and backgrounds was therefore the ambition for our QCD/SM working group at this Les Houches workshop. Members of the working group made significant progress towards this on a number of fronts. A variety of tools were further developed, from methods to perform higher order perturbative calculations or various types of resummation, to improvements in the modeling of underlying events and parton showers. Furthermore, various precise studies of important specific processes were conducted. A significant part of the activities in Les Houches revolved around Monte Carlo simulation of collision events. A number of contributions in this report reflect the progress made in this area. At present a large number of Monte Carlo programs exist, each written with a different purpose and employing different techniques. Discussions in Les Houches revealed the need for an accessible primer on Monte Carlo programs, featuring a listing of various codes, each with a short description, but also providing a low-level explanation of the underlying methods. This primer has now been compiled and a

  4. International Technical Working Group Round Robin Tests

    Energy Technology Data Exchange (ETDEWEB)

    Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

    2003-02-01

    The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases.

  5. International Technical Working Group Round Robin Tests

    International Nuclear Information System (INIS)

    Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

    2003-01-01

    The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases

  6. Cementitious Materials in Safety Cases for Geological Repositories for Radioactive Waste: Role, Evolution and Interactions. A Workshop organised by the OECD/NEA Integration Group for the Safety Case and hosted by ONDRAF/NIRAS. Cementitious materials in safety cases for radioactive waste: role, evolution and interactions

    International Nuclear Information System (INIS)

    2012-01-01

    The OECD Nuclear Energy Agency (NEA) Integration Group for the Safety Case (IGSC) organised a workshop to assess current understanding on the use of cementitious materials in radioactive waste disposal. The workshop was hosted by the Belgian Agency for Radioactive Waste and Enriched Fissile Materials (Ondraf/Niras), in Brussels, Belgium on 17-19 November 2009. The workshop brought together a wide range of people involved in supporting safety case development and having an interest in cementitious materials: namely, cement and concrete experts, repository designers, scientists, safety assessors, disposal programme managers and regulators. The workshop was designed primarily to consider issues relevant to the post-closure safety of radioactive waste disposal, but also addressed some related operational issues, such as cementitious barrier emplacement. Where relevant, information on cementitious materials from analogous natural and anthropogenic systems was also considered. This report provides a synthesis of the workshop, and summarises its main results and findings. The structure of this report follows the workshop agenda: - Section 2 summarises plenary and working group discussions on the uses, functions and evolution of cementitious materials in geological disposal, and highlights key aspects and discussions points. - Section 3 summarises plenary and working group discussions on interactions of cementitious materials with other disposal system components, and highlights key aspects and discussions points. - Section 4 summarises the workshop session on the integration of issues related to cementitious materials using the safety case. - Section 5 presents the main conclusions from the workshop. - Section 6 contains a list of references. - Appendix A presents the workshop agenda. - Appendix B contains the abstracts and, where provided, technical papers supporting oral presentations at the workshop. - Appendix C contains the abstracts and, where provided, technical

  7. Report from the neutron diffraction work group

    International Nuclear Information System (INIS)

    1978-08-01

    This progress report of the neutron diffraction group at the Hahn Meitner Institute in Berlin comprises the following contributions: Three-dimensional critical properties of CsNiF 3 around the Neel point; Spin waves in CsNiF 3 with an applied magnetic field; Solitons in CsNiF 3 : Their experimental evidence and their thermodynamics; Neutron diffraction study of DAG at very low temperatures and in external magnetic field; Neutron diffraction investigation of tricritical behaviour in DyPO 4 ; Crystalline modifications and structural phase transitions of NaOH; Gitterdynamik von Cerhydrid; Investigation of the ferroelectric-ferroelastic phase transition in KH 2 PO 4 and RbH 2 PO 4 by means of γ-ray diffractometry; A γ-ray diffractometer for systematic measurements of absolute structure factors; Electron density in pyrite by combined γ-ray and neutron diffraction measurements: Thermal parameters from short wavelength neutron data; Accurate determination of temperature parameters from neutron diffraction data: Direct observation of the thermal diffuse scattering from silicon using perfect crystals; A Compton spectrometer for momentum density studies using 412 keV γ-radiation; Investigation of the electronic structure of Niobiumhydrides by means of gamma-ray Compton scattering; Interpretation of Compton profile data in position space; High resolution neutron scattering measurements on single crystals using a horizontally bent monochromator and a multidetecter; Statistical analysis of neutron diffraction studies of proteins. (orig.) [de

  8. Summary Record of the 15th Meeting of the Working Group on Risk Assessment (WGRISK)

    International Nuclear Information System (INIS)

    2015-01-01

    The main mission of the working group on risk assessment (WGRISK) is to advance the understanding and utilisation of probabilistic safety assessment (PSA) in ensuring the continued safety of nuclear installations in member countries. While PSA methodology has matured greatly over the years, further work is required. WGRISK has been active in several of these areas, including: human reliability; software reliability; low power and shutdown risk. In order to maintain a current perspective, the working group collaborates and assists other working groups within the CSNI, such as operating experience and organisational factors as well as keeping close co-ordination with other international organisations. Over the past twenty years, the NEA PWG5 and now WGRISK have looked at the technology and methods used for identifying contributors to risk and assessing their importance. Work during much of this period was concentrated on Level-1 PSA methodology. In recent years the focus has shifted into more specific PSA methodologies and risk-informed applications. This document summarizes the content of the 15. Meeting of WGRISK: - presentation of the new WGRISK Bureau, - Approval of the 14. WGRISK Meeting Summary Record [NEA/SEN/SIN/WGRISK (2013)1], - Use and Development of PSA in NEA Member Countries and by other International Organisations, - Report by the WGRISK Secretariat on the current WGRISK programme of work, actions taken by CSNI and CNRA and other recent developments in OECD/NEA, - Development of BPGs on failure mode taxonomy for reliability assessment of digital I and C systems for PSA [Task 2010-3], - Update Use of OECD Data Project Products in PSA [Task 2011-1], - Status report on the common WGHOF/WGRISK HRA Task, - Outcome on the International Workshop on PSA of Natural External Hazards Including Earthquakes, April 2014 [Task 2012-1], - Status report on the International Workshop on Fire PRA [Task 2012-2], - PSA insights relating to the loss of electrical sources

  9. Health in Transportation Working Group 2016 Annual Report

    Science.gov (United States)

    2017-06-30

    The Health in Transportation Working Group 2016 Annual Report provides an overview of the Working Groups activities and accomplishments in 2016, summarizes other USDOT health-related accomplishments, and documents its progress toward the recommend...

  10. Workshop presentations

    International Nuclear Information System (INIS)

    Sanden, Per-Olof; Edland, Anne; Reiersen, Craig; Mullins, Peter; Ingemarsson, Karl-Fredrik; Bouchard, Andre; Watts, Germaine; Johnstone, John; Hollnagel, Erik; Ramberg, Patric; Reiman, Teemu

    2009-01-01

    An important part of the workshop was a series of invited presentations. The presentations were intended to both provide the participants with an understanding of various organisational approaches and activities as well as to stimulate the exchange of ideas during the small group discussion sessions. The presentation subjects ranged from current organisational regulations and licensee activities to new organisational research and the benefits of viewing organisations from a different perspective. There were more than a dozen invited presentations. The initial set of presentations gave the participants an overview of the background, structure, and aims of the workshop. This included a short presentation on the results from the regulatory responses to the pre-workshop survey. Representatives from four countries (Sweden, Canada, Finland, and the United Kingdom) expanded upon their survey responses with detailed presentations on both regulatory and licensee safety-related organisational activities in their countries. There were also presentations on new research concerning how to evaluate safety critical organisations and on a resilience engineering perspective to safety critical organisations. Below is the list of the presentations, the slides of which being available in Appendix 2: 1 - Workshop Welcome (Per-Olof Sanden); 2 - CSNI Working Group on Human and Organisational Factors (Craig Reiersen); 3 - Regulatory expectations on justification of suitability of licensee organisational structures, resources and competencies (Anne Edland); 4 - Justifying the suitability of licensee organisational structures, resources and competencies (Karl-Fredrik Ingemarsson); 5 - Nuclear Organisational Suitability in Canada (Andre Bouchard); 6 - Designing and Resourcing for Safety and Effectiveness (Germaine Watts); 7 - Organisational Suitability - What do you need and how do you know that you've got it? (Craig Reiersen); 8 - Suitability of Organisations - UK Regulator's View (Peter

  11. 77 FR 9265 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2012-02-16

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning.... L. 102-575) of 1992. The AMP includes a Federal advisory committee, the AMWG, a technical work group...

  12. 78 FR 7810 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2013-02-04

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning..., the AMWG, a technical work group (TWG), a Grand Canyon Monitoring and Research Center, and independent...

  13. 78 FR 21415 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2013-04-10

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning... Federal advisory committee, the AMWG, a technical work group, a Grand Canyon Monitoring and Research...

  14. 77 FR 22801 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2012-04-17

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group...). SUMMARY: The Glen Canyon Dam Adaptive Management Work Group (AMWG) makes recommendations to the Secretary..., the AMWG, a technical work group, a Grand Canyon Monitoring and Research Center, and independent...

  15. 76 FR 24516 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2011-05-02

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning..., the AMWG, a technical work group (TWG), a Grand Canyon Monitoring and Research Center, and independent...

  16. Student Collaboration in Group Work: Inclusion as Participation

    Science.gov (United States)

    Forslund Frykedal, Karin; Hammar Chiriac, Eva

    2018-01-01

    Group work is an educational mode that promotes learning and socialisation among students. In this study, we focused on the inclusive processes when students work in small groups. The aim was to investigate and describe students' inclusive and collaborative processes in group work and how the teacher supported or impeded these transactions. Social…

  17. Learning rights, participation and toleration in student group work

    DEFF Research Database (Denmark)

    Wiberg, Merete

    2013-01-01

    . This article offers a moral perspective on group work by introducing a concept of ‘learning rights’ of the individual in group work. The aim of the paper is theoretically to offer a vocabulary concerning ‘learning rights’ of the individual in group work by applying John Dewey’s metaphor ‘the spectator versus...

  18. Are groups working in the Information Technology class? | Mentz ...

    African Journals Online (AJOL)

    We discuss teache rs' perce ption of the use of group work in the Information Technology (IT) classroom. We describe the current situation regarding the implementation of group work in IT classrooms in South Africa as well as the challenges that IT teachers face when implementing group work. This information will be used ...

  19. Qualitative Research in Group Work: Status, Synergies, and Implementation

    Science.gov (United States)

    Rubel, Deborah; Okech, Jane E. Atieno

    2017-01-01

    The article aims to advance the use of qualitative research methods to understand group work. The first part of this article situates the use of qualitative research methods in relationship to group work research. The second part examines recent qualitative group work research using a framework informed by scoping and systematic review methods and…

  20. Summary of the working group on modelling and simulation

    International Nuclear Information System (INIS)

    Schachinger, L.

    1991-11-01

    The discussions and presentations in the Simulations and Modelling subgroup of the Fifth ICFA Beam Dynamics Workshop ''The Effects of Errors in Accelerators'' are summarized. The workshop was held on October 3--8, 1991 in Corpus Christi, Texas

  1. Crop-water-environment models; selected papers to the workshop organized by the ICID Working Group on `Sustainable Crops and Water Use' at the occasion of the 16th Congress of the International Commission on Irrigation and Drainage at Cairo, Egypt

    NARCIS (Netherlands)

    Ragab, R.; El-Din El-Quosy, D.; Broek, van den B.J.; Pereira, L.S.

    1996-01-01

    The main aim of this workshop was to bring individuals and organizations together who contribute to the development and upgrading of crop-water-environment models. Twenty-four model papers were presented in three sessions: pesticides and nitrates, salinity, and crop water balance. Each presentation

  2. Creating Fantastic PI Workshops

    Energy Technology Data Exchange (ETDEWEB)

    Biedermann, Laura B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Blythe G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Colbert, Rachel S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dagel, Amber Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gupta, Vipin P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hibbs, Michael R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); West, Roger Derek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    The goal of this SAND report is to provide guidance for other groups hosting workshops and peerto-peer learning events at Sandia. Thus this SAND report provides detail about our team structure, how we brainstormed workshop topics and developed the workshop structure. A Workshop “Nuts and Bolts” section provides our timeline and check-list for workshop activities. The survey section provides examples of the questions we asked and how we adapted the workshop in response to the feedback.

  3. Les Houches 2015: Physics at TeV colliders - new physics working group report

    CERN Document Server

    Brooijmans, G.; Delgado, A.; Englert, C.; Falkowski, A.; Fuks, B.; Nikitenko, S.; Sekmen, S.; Barducci, D.; Bernon, J.; Bharucha, A.; Brehmer, J.; Brivio, I.; Buckley, A.; Burns, D.; Cacciapaglia, G.; Cai, H.; Carmona, A.; Carvalho, A.; Chalons, G.; Chen, Y.; Chivukula, R.S.; Conte, E.; Deandrea, A.; De Filippis, N.; Desai, N.; Flacke, T.; Frigerio, M.; Garcia-Pepin, M.; Gleyzer, S.; Goudelis, A.; Goertz, F.; Gras, P.; Henrot-Versillé, S.; Hewett, J.L.; Ittisamai, P.; Katz, A.; Kopp, J.; Kraml, S.; Krauss, M.E.; Kulkarni, S.; Laa, U.; Lacroix, S.; Lane, K.; Majumder, D.; Martin, A.; Mawatari, K.; Mohan, K.; Morse, D.M.; Mimasu, K.; Mühlleitner, M.; Nardecchia, M.; No, J.M.; Orlando, R.D.; Pani, P.; Papucci, M.; Polesello, G.; Pollard, C.; Porod, W.; Prosper, H.B.; Quirós, M.; Rizzo, T.; Sakurai, K.; Santiago, J.; Sanz, V.; Schmidt, T.; Schmeier, D.; Sengupta, D.; Shao, H.-S.; Simmons, E.H.; Sonneveld, J.; Spieker, T.; Spira, M.; Tattersall, J.; Unel, G.; Vega-Morales, R.; Waltenberger, W.; Weiler, A.; You, T.; Zapata, O.A.; Zerwas, D.

    2016-01-01

    We present the activities of the 'New Physics' working group for the 'Physics at TeV Colliders' workshop (Les Houches, France, 1-19 June, 2015). Our report includes new physics studies connected with the Higgs boson and its properties, direct search strategies, reinterpretation of the LHC results in the building of viable models and new computational tool developments. Important signatures for searches for natural new physics at the LHC and new assessments of the interplay between direct dark matter searches and the LHC are also considered.

  4. Reports of the Working Group on Precision Calculations for the Z Resonance

    International Nuclear Information System (INIS)

    Bardin, D.; Hollik, W.; Passarino, G.

    1995-01-01

    This Report summarizes the results of 12 months' activities of the Working Group on Precision Calculations for the Z Resonance, run at CERN in 1994. The main goal of the Working Group was to present a update of studies on radiative corrections for Z-resonance processes, integrating all new results that had appeared since the previous Workshop on ''Z Physics at LEP 1'', held in 1989. The Report is, however, more than a mere collection of the proceedings of the three general meetings held on January 14, March 31 and June 13, 1994. Three subgroups have been working in three related fields: electroweak physics, QCD at the Z resonance and Bhabha scattering in the luminosity region. An attempt has been made to present the final reports from these subgroups in a complete and homogeneous form. The subgroups' contributions in the three fields correspondingly comprise the three main parts of the Report. (orig.)

  5. Bioprocessing automation in cell therapy manufacturing: Outcomes of special interest group automation workshop.

    Science.gov (United States)

    Ball, Oliver; Robinson, Sarah; Bure, Kim; Brindley, David A; Mccall, David

    2018-04-01

    Phacilitate held a Special Interest Group workshop event in Edinburgh, UK, in May 2017. The event brought together leading stakeholders in the cell therapy bioprocessing field to identify present and future challenges and propose potential solutions to automation in cell therapy bioprocessing. Here, we review and summarize discussions from the event. Deep biological understanding of a product, its mechanism of action and indication pathogenesis underpin many factors relating to bioprocessing and automation. To fully exploit the opportunities of bioprocess automation, therapeutics developers must closely consider whether an automation strategy is applicable, how to design an 'automatable' bioprocess and how to implement process modifications with minimal disruption. Major decisions around bioprocess automation strategy should involve all relevant stakeholders; communication between technical and business strategy decision-makers is of particular importance. Developers should leverage automation to implement in-process testing, in turn applicable to process optimization, quality assurance (QA)/ quality control (QC), batch failure control, adaptive manufacturing and regulatory demands, but a lack of precedent and technical opportunities can complicate such efforts. Sparse standardization across product characterization, hardware components and software platforms is perceived to complicate efforts to implement automation. The use of advanced algorithmic approaches such as machine learning may have application to bioprocess and supply chain optimization. Automation can substantially de-risk the wider supply chain, including tracking and traceability, cryopreservation and thawing and logistics. The regulatory implications of automation are currently unclear because few hardware options exist and novel solutions require case-by-case validation, but automation can present attractive regulatory incentives. Copyright © 2018 International Society for Cellular Therapy

  6. The experiences and perceptions of persons with disabilities regarding work skills development in sheltered and protective workshops.

    Science.gov (United States)

    Soeker, Mohammed Shaheed; De Jongh, Jo Celene; Diedericks, Amy; Matthys, Kelly; Swart, Nicole; van der Pol, Petra

    2018-01-01

    Protective workshops and sheltered employment settings have been instrumental in developing the work skills of people with disabilities, however there has been a void in the literature about its influence on the ability of individuals to find employment in the open labor market. The aim of the study is to explore the experiences and perceptions of people with disabilities about the development of their work skills for transitioning into the open labor market. Five individuals with various types of disabilities and two key informants participated in the study. The research study was positioned within the qualitative paradigm specifically utilizing an exploratory and descriptive research design. In order to gather data from the participants, semi structured interviews were used. Three themes emerged from the findings of the study. Theme one, designated as "Reaching a ceiling", reflected the barriers that the participants experienced regarding work skills development. Theme two, designated as "Enablers for growth within the workplace", related to the enabling factors related to development of the work skills of persons with a disability (PWD). The final theme related to the meaning that PWD associated to their worker role and was designated as "A sense of universality". The participants highlighted that they felt their coworkers in the workshops were "like family" to them and thoroughly enjoyed the work tasks and work environment, expressing specific support from their fellow workers. Through reaching their goals, engaging in their work tasks and having the sense of universality in the workplace, the workers felt that the work they participated in gave them meaning to their life. The findings of the study indicated that managers of protective workshops and sheltered employment settings should consider selecting work tasks that enable the development of skills needed in the open labour market. A work skills development system whereby PWD in these workshops could

  7. 77 FR 45370 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-07-31

    ...-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders... take place at the North Fork Grange Hall, Dutch Creek Road, Junction City, CA 96048. The group will...

  8. Summary of the TeV33 working group

    International Nuclear Information System (INIS)

    Bagley, P.P.; Bieniosek, F.M.; Colestock, P.

    1996-10-01

    This summary of the TeV33 working group at Snowmass reports on work in the areas of Tevatron store parameters, the beam-beam interaction, Main Injector intensity (slip stacking), antiproton production, and electron cooling

  9. Replacing Lecture with Peer-led Workshops Improves Student Learning

    OpenAIRE

    Preszler, Ralph W.

    2009-01-01

    Peer-facilitated workshops enhanced interactivity in our introductory biology course, which led to increased student engagement and learning. A majority of students preferred attending two lectures and a workshop each week over attending three weekly lectures. In the workshops, students worked in small cooperative groups as they solved challenging problems, evaluated case studies, and participated in activities designed to improve their general learning skills. Students in the workshop versio...

  10. Closing plenary summary of working group 4 instrumentation and controls for ERL2011

    Energy Technology Data Exchange (ETDEWEB)

    Gassner, D.; Obina, T.

    2011-10-16

    Working group 4 was charged with presentations and discussions on instrumentation and controls with regards to Energy Recovery Linacs (ERL). There were 4 sessions spanning 3.5 hours in which 7 talks were delivered, the first being an invited plenary presentation. The time allotted for each talk was limited to 20-25 minutes in order to allow 5-10 minutes for discussion. Most of the talks were held in joint session with working group 5 (Unwanted Beam Loss). This format was effective for the purpose of this workshop. A final series of discussion sessions were also held with working group 5. Summary of the working group 4 activities, presented in the closing plenary session. We had a plenary presentation on operational performance, experience, and future plans at the existing ERL injector prototype at Cornell. This included instrumentation data, controls system configurations, as well as description of future needs. This was followed by four talks from KEK and RIKEN/SPring-8 that described electron beam instrumentation already in use or under development that can be applied to ERL facilities. The final talks described the ERLs under construction at KEK and BNL. The format of having joint sessions with working group 5 was beneficial as there were a significant number of common topics and concerns with regards to the causes of beam loss, instrumentation hardware, and techniques used to measure and analyze beam loss.

  11. Has Group Work Education Lost Its Social Group Work Essence? A Content Analysis of MSW Course Syllabi in Search of Mutual Aid and Group Conflict Content

    Science.gov (United States)

    Sweifach, Jay Stephen

    2015-01-01

    This article presents the results of a content analysis of MSW group work course syllabi in an effort to better understand the extent to which mutual aid and group conflict, two important dimensions of social group work, are included and featured as prominent elements in MSW-level group work instruction.

  12. Working group 1B - basis for the standard-liquid pathway

    International Nuclear Information System (INIS)

    Budnitz, R.

    1993-01-01

    This paper presents a summary of the progress made by working group 1B (Basis for the Standard-Liquid Pathway) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group discussed the containment requirements of Environmental Protection Agency (EPA) standard 40 CFR Part 191. This is a major issue when considering the liquid pathway of contamination during the disposal of high-level radioactive wastes. Questions that were raised by this group were (1) What were the problems with Table 1 of 40 CFR Part 191?; (2) What would be fixed with the person-rem alternative that is offered?; and (3) What would be fixed if Table 1 were supplemented with additional columns for other pathways? Other topics that were touched on were the definition of the term open-quotes reasonable expectationsclose quotes and 100,000 year criteria

  13. A working group for Japanese nuclear data measurement network

    International Nuclear Information System (INIS)

    Watanabe, Yukinobu

    2013-01-01

    A new working group in the Japanese Nuclear Data Committee has been established to make a cooperative network among researchers involved in nuclear data measurements and to discuss the strategy for nuclear data measurements. The working group activities are reported. (author)

  14. 77 FR 20789 - Work Group on Measuring Systems for Taxis

    Science.gov (United States)

    2012-04-06

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Work Group on Measuring.... SUMMARY: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to develop... states in laws, regulations, methods, and testing equipment that comprises the regulatory control of...

  15. Commission 41 Working Group on Astronomy and World Heritage

    Science.gov (United States)

    Ruggles, Clive; Wolfschmidt, Gudrun; Badolati, Ennio; Batten, Alan; Belmonte, Juan; Bhathal, Ragbir; Brosche, Peter; Dbarbat, Suzanne; DeVorkin, David; Duerbeck, Hilmar W.; Epifania, Priscilla; Ferlet, Roger; Funes, Jos; Glass, Ian S.; Griffin, Elizabeth; Gurshtein, Alexander; Hearnshaw, John; Helou, George; Hidayat, Bambang; Hockey, Thomas; Holbrook, Jarita; Incerti, Manuela; Kepler, S. O.; Kochhar, Rajesh; Krupp, Edwin C.; Locher, Kurt; Maglova-Stoeva, Penka; Mickaelian, Areg; Pettersen, Bjorn R.; Pineda de Caras, Mara Cristina; Pinigin, Gennadiy; Pompeia, Luciana; Pozhalova, Zhanna; Yun-li, Shi; Simonia, Irakli; Le Guet Tully, Francoise; Wainscoat, Richard

    2010-05-01

    What follows is a short report on the Business Meeting of the Astronomy and World Heritage Working Group held on Thursday August 6, 2009. This was the first formal Business Meeting of the Working Group since its formation following the signing of the Memorandum of Understanding between the IAU and UNESCO on Astronomy and World Heritage in October 2008.

  16. 75 FR 17158 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-04-05

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N065; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  17. 75 FR 51284 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-08-19

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N168; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  18. 77 FR 10766 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-02-23

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N039; FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  19. 75 FR 70947 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-11-19

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N253; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  20. 76 FR 52345 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-08-22

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N168; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  1. 76 FR 70751 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-11-15

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N237; FXFR1334088TWG0W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  2. 75 FR 27814 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-05-18

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N101; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  3. 76 FR 14044 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-03-15

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N044; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  4. 77 FR 74203 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-12-13

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N266; FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  5. 76 FR 34248 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-06-13

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N116; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  6. 76 FR 23621 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-04-27

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N083; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  7. 77 FR 30314 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-05-22

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N124: FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  8. 77 FR 50155 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-08-20

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N201;FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  9. 75 FR 10501 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-03-08

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N041; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  10. 75 FR 21602 - Online Safety and Technology Working Group Meeting

    Science.gov (United States)

    2010-04-26

    ... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

  11. 75 FR 1338 - Online Safety and Technology Working Group Meeting

    Science.gov (United States)

    2010-01-11

    ... promote a safe online environment for children. The Act requires the OSTWG to report its findings and... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

  12. Report of the Working Group on Publicity and Funding

    DEFF Research Database (Denmark)

    Gammeltoft, Peder

    2014-01-01

    The report highlights the activities of the working group in raising awareness of the need for geographical names standardization and the work of the Group of Experts, particularly in advancing the digital presence of UNGEGN, through web presence and updated Media Kit and Wikipedia presence...

  13. Division X, XII / Commission 40, 41 / Working Group Radio Astronomy

    NARCIS (Netherlands)

    Kellermann, Kenneth; Orchiston, Wayne; Davies, Rod; Gurvits, Leonid; Ishiguro, Masato; Lequeux, James; Swarup, Govind; Wall, Jasper; Wielebinski, Richard; van Woerden, Hugo

    The IAU Working Group on Historical Radio Astronomy (WGHRA) was formed at the 2003 General Assembly of the IAU as a Joint Working Group of Commissions 40 (Radio Astronomy) and 41 (History of Astronomy), in order to: a) assemble a master list of surviving historically-significant radio telescopes and

  14. Effects of Personality on Attitudes toward Academic Group Work

    Science.gov (United States)

    Forrester, William R.; Tashchian, Armen

    2010-01-01

    This study investigated the effects of personality on attitudes toward academic group work among a sample of 225 business students. Data were collected using pre-existing scales for measuring personality and attitudes toward academic group work. Specifically, the Neo-FFI scale was used to measure the five personality dimensions of openness,…

  15. Summary records of the meetings of INFCE Working Group 6

    International Nuclear Information System (INIS)

    These were 6 meetings of Working Group 6 that took place between 8 December 1977 and 7 September 1979. This document consists of the summaries of those meetings and it reports on the objectives of the Working Group, the participants, the guidelines for the study, and the outline of the final report

  16. Group Work in Schools: A Process Consultation Approach

    Science.gov (United States)

    Farouk, Shaalan

    2004-01-01

    This paper provides a description of how an educational psychologist can consult with groups of teachers mostly in relation to their work with pupils who display emotional behavioural difficulties. The paper includes a review of the work on group consultation in schools, followed by a description of process consultation (Schein, 1988 ) and how the…

  17. Ethical Issues in the Research of Group Work

    Science.gov (United States)

    Goodrich, Kristopher M.; Luke, Melissa

    2017-01-01

    This article provides a primer for researchers exploring ethical issues in the research of group work. The article begins with an exploration of relevant ethical issues through the research process and current standards guiding its practice. Next, the authors identify resources that group work researchers can consult prior to constructing their…

  18. Group Work, Interlanguage Talk,and Second Language Acquisition.

    Science.gov (United States)

    Long, Michael H.; Porter, Patricia A.

    1985-01-01

    Discusses both the pedagogical arguments and the psycholinguistic rationale for small-group work in the second language classroom. Claims that the negotiation work possible in group actiity makes it an attractive alternative to the teacher-led discussion. Reviews research findings on interlanguage which generally support the claims made for group…

  19. Invited and contributed papers presented by the theory group at the joint Varenna-Lausanne international workshop 'theory of fusion plasmas'

    International Nuclear Information System (INIS)

    1996-09-01

    In this report eight invited and contributed papers of the theory group are included which were presented at joint Varenna-Lausanne international workshop on 'theory of fusion plasmas'. (author) figs., tabs., refs

  20. Group work and undergraduate accounting students: a Bourdieusian analysis

    OpenAIRE

    Teviotdale, Wilma; Clancy, David; Fisher, Roy; Hill, Pat

    2017-01-01

    This study investigated students’ views and experiences of group work in a vocationally oriented undergraduate Accounting and Finance degree course in an English post-1992 university. In this context tutors prepare students for the profession and for the workplace, and the development of team-working skills is a core element in the curriculum. This presents a significant challenge to tutors given that students commonly report an aversion to aspects of group work, including a perceived loss of...

  1. Proceedings of the 7. annual workshop of the CEATI Water Management Group : water management 2006 : collecting and managing hydrologic data

    International Nuclear Information System (INIS)

    2006-01-01

    This workshop by the Water Management Interest Group of CEATI focused on the development and methods and tools needed to optimize hydraulic processes while maintaining safe and environmentally-sound operations. In particular, it addressed issues regarding watershed management and water use planning, meteorological forecasting, operational modeling, data acquisition techniques, and impact assessment. Hydrologic data must be acquired and processed in order to effectively operate water control structures. It was noted that although data requirements may change from basin to basin, depending on seasonal forecasting, quality data is the foundation of all hydrological operational modelling and decision support software packages. As such, better acquisition methods and equipment are needed along with well designed networks and modern control applications. The first session of this workshop dealt with network data collection offered an opportunity to expand network design criteria standards and technologies that can offer support for cost effective maintenance to achieve acceptable levels of reliability and accuracy. The second session on quality control and data validation explored potential solutions for improved methods and techniques in quality control. The third session on data sharing and network coordination examined ways that companies and government agencies manage and share hydrologic data. The workshop featured 22 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs

  2. Investigating the Effectiveness of Group Work in Mathematics

    Directory of Open Access Journals (Sweden)

    Anastasia Sofroniou

    2016-09-01

    Full Text Available Group work permits students to develop a range of critical thinking, analytical and communication skills; effective team work; appreciation and respect for other views, techniques and problem-solving methods, all of which promote active learning and enhance student learning. This paper presents an evaluation of employing the didactic and pedagogical customs of group work in mathematics with the aim of improving student performance as well as exploring students’ perceptions of working in groups. The evaluation of group work was carried out during tutorial time with first year civil engineering students undertaking a mathematics module in their second semester. The aim was to investigate whether group work learning can help students gain a deeper understanding of the module content, develop improved critical and analytical thinking skills and see if this method of pedagogy can produce higher performance levels. The group work sessions were conducted over four weeks whilst studying the topic of integration. Evaluation surveys were collected at the end of the intervention along with an investigation into the examination results from the end of semester examinations. In order to derive plausible and reasonable conclusions, these examination results were compared with an analogous cohort of first year mathematics students, also studying integration in their engineering-based degree. The investigation into the effectiveness of group work showed interesting and encouraging positive outcomes, supported by a combination of qualitative and quantitative analysis.

  3. Group Work and Leadership: Perception of FCS Students

    Science.gov (United States)

    Arendt, Susan W.; Gregoire, Mary B.

    2006-01-01

    No known studies have examined the perception of family and consumer science (FCS) students related to group work in the classroom and its relationship to leadership. In this qualitative study, two groups of FCS students--hospitality management and dietetics--viewed group projects as exercises in leadership skills that had many barriers.…

  4. Letting the Drama into Group Work: Using Conflict Constructively in Performing Arts Group Practice

    Science.gov (United States)

    Crossley, Tracy

    2006-01-01

    The article examines conflict avoidance in performing arts group work and issues arising in relation to teaching and learning. In group theory, conflict is addressed largely in terms of its detrimental effects on group work, and its constructive potential is often marginalized. Similarly, undergraduate students usually interpret "effective…

  5. Causal Relationships between Communication Confidence, Beliefs about Group Work, and Willingness to Communicate in Foreign Language Group Work

    Science.gov (United States)

    Fushino, Kumiko

    2010-01-01

    This article reports on the causal relationships between three factors in second language (L2) group work settings: communication confidence (i.e., confidence in one's ability to communicate), beliefs about group work, and willingness to communicate (WTC). A questionnaire was administered to 729 first-year university students in Japan. A model…

  6. Guideline group composition and group processes: article 3 in Integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

    Science.gov (United States)

    Kunz, Regina; Fretheim, Atle; Cluzeau, Françoise; Wilt, Timothy J; Qaseem, Amir; Lelgemann, Monika; Kelson, Marcia; Guyatt, Gordon; Schünemann, Holger J

    2012-12-01

    Professional societies, like many other organizations around the world, have recognized the need to use more rigorous processes to ensure that health care recommendations are informed by the best available research evidence. This is the third of a series of 14 articles that were prepared to advise guideline developers in respiratory and other diseases on considerations for group compositions and group processes in guideline development, and how this can be effectively integrated in the context of respiratory disease guidelines on a national and international level. We updated a review of the literature addressing group composition and group process, focusing on the following questions: 1. How to compose a functioning and representative guideline group; Who should be included in a guideline panel?; How to select organizations, groups, and individuals; What expertise is needed?; Consultation with non-included groups. 2. How to assure a functioning group process; How to make the process constructive; Balancing participation and finding agreement; Administrative support; What constitutes sufficient resources? Our conclusions are based on available evidence from published literature, experience from guideline developers, and workshop discussions. Formal studies addressing optimal processes in developing guidelines are limited, and experience from guideline organizations supplement the formal studies. When resources are available, guideline development groups should aim for multidisciplinary groups, including patients. Prerequisites for a multidisciplinary group include: a strong chair experienced in group facilitation with broad acceptance in the group, training the group in guideline methodology, and professional technical support. Formal consensus developing methods have proved effective in reaching agreement on the final recommendations.

  7. Effectiveness of an experiential workshop for enhancing helping professionals' self-competence in death work in Hong Kong: a randomised controlled trial.

    Science.gov (United States)

    Chan, Wallace Chi Ho; Tin, Agnes Fong; Wong, Karen Lok Yi

    2017-05-01

    Helping professionals require self-competence in coping with the existential and emotional challenges of death work. Previous training often focused on knowledge and skills rather than on this competence. This study aimed to examine the effectiveness of a 3-day workshop in Hong Kong to enhance helping professionals' self-competence in death work. A randomised controlled trial was conducted to examine the effects of the training between January and May 2014. Targeted participants were helping professionals who had been doing death work for at least 6 months. The 112 participants were openly recruited from hospitals and NGOs and were assigned to an intervention group or a waitlist control group. Data were collected at pre-intervention and post-intervention. Primary outcome was self-competence in death work. All participants were grouped for analysing the changes in outcomes at pre-intervention, post-intervention and 3-month follow-up. Participants in the intervention group experienced a significant increase in the total score of the Self-competence in Death Work Scale (SC-DWS) and in scores of the Existential and Emotional subscales of SC-DWS. The positive effects of training on self-competence in death work were maintained at the 3-month follow-up. This study provides evidence of the effectiveness of training in enhancing helping professionals' self-competence in death work. Further research is required to examine the long-term effects of training. © 2016 John Wiley & Sons Ltd.

  8. Discussions of the uranium geology working groups IGC, Sydney

    International Nuclear Information System (INIS)

    1978-01-01

    The report is divided into six working group discussions on the following subjects: 1) Chemical and physical mechanisms in the formation of uranium mineralization, geochronology, isotope geology and mineralogy; 2) Sedimentary basins and sandstone-type uranium deposits; 3) Uranium in quartz-pebble conglomerates; 4) Vein and similar type deposits (pitchblende); 5) Other uranium deposits; 6) Relation of metallogenic, tectonic and zoning factors to the origin of uranium deposits. Each working group paper contains a short introductory part followed by a discussion by the working group members

  9. The work of the 'Irradiation Damage' sub-group of the EURATOM Working Group on Research Reactor Dosimetry

    International Nuclear Information System (INIS)

    Genthon, J.P.

    1975-01-01

    The EURATOM Working Group on Reactor Dosimetry is investigating the problems of the dosimetry of radiation damage experiments. Papers have been published on the dosimetry of graphite and irradiation of metals: the model chosen, the quantities employed to express the fluences, numerical values, measurements, and measurement techniques. The ensuing work of the EURATOM Working Group of Reactor Dosimetry in these areas will deal with the measurement methods required for the dosimetry of radiation damage. (Auth.)

  10. The Power and Promise of Group Work: Consumer Evaluation of Group Work Services in Gauteng, South Africa

    Science.gov (United States)

    Rasool, Shahana; Ross, Eleanor

    2017-01-01

    Purpose: In light of the limited research into consumers' experiences of group work services in South Africa, the study evaluated groups offered by a range of social service agencies in Gauteng to determine whether group interventions were perceived by users as developmental and empowering. Methods: Program evaluation was employed to evaluate 47…

  11. Working group report: Flavor physics and model building

    Indian Academy of Sciences (India)

    cO Indian Academy of Sciences. Vol. ... This is the report of flavor physics and model building working group at ... those in model building have been primarily devoted to neutrino physics. ..... [12] Andrei Gritsan, ICHEP 2004, Beijing, China.

  12. Linear Collider Working Group reports from Snowmass '88

    International Nuclear Information System (INIS)

    Ruth, R.D.

    1989-03-01

    This report contains a summary of the Linear Collider Working Group. Papers on the following topics are discussed: parameters; damping ring; bunch compressor; linac; final focus; and multibunch effects

  13. Report from the Panama Canal Stakeholder Working Group.

    Science.gov (United States)

    2013-03-01

    This project assists the Texas Department of Transportation (TxDOT) in assessing the potential impacts of the Panama Canal expansion on Texas ports and the landside transportation system. TxDOT formed a Panama Canal Stakeholder Working Group (PCSWG) ...

  14. Environmental Working Group Arctic Meteorology and Climate Atlas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Environmental Working Group (EWG) was established in June 1995 under the framework of the U.S.-Russian Joint Commission on Economic and Technological...

  15. Final Report of the Advanced Coal Technology Work Group

    Science.gov (United States)

    The Advanced Coal Technology workgroup reported to the Clean Air Act Advisory Committee. This page includes the final report of the Advanced Coal Technology Work Group to the Clean Air Act Advisory Committee.

  16. Remarks of the SFRP working group about ICRP recommendations

    International Nuclear Information System (INIS)

    Schieber, C.; Cordoliani, Y.S.

    2005-01-01

    Remarks of the SFRP working group about ICRP recommendations. The International Commission on Radiological Protection has proposed last summer on its Web site the draft text of the 2005 ICRP recommendations for consultation. As it was done for the previous drafts, the French Society for Radiation Protection, has sent his comments to the ICRP, through a specific working group. The text sent to the ICRP is presented here to the readers of the SFRP's Journal. (author)

  17. Report of the Working Group on Publicity and Funding

    DEFF Research Database (Denmark)

    Gammeltoft, Peder

    2017-01-01

    The report presents the aims and activities of the working group and in its efforts with raising awareness of the need for geographical names standardization and the work of the Group of Experts, through presence on the web and social media and Media Kit. The report also highlights efforts to find...... financial support for training and for representatives from developing countries attending UNSCGN Conferences and UNGEGN Sessions....

  18. WORK GROUP DEVELOPMENT MODELS – THE EVOLUTION FROM SIMPLE GROUP TO EFFECTIVE TEAM

    Directory of Open Access Journals (Sweden)

    Raluca ZOLTAN

    2016-02-01

    Full Text Available Currently, work teams are increasingly studied by virtue of the advantages they have compared to the work groups. But a true team does not appear overnight but must complete several steps to overcome the initial stage of its existence as a group. The question that arises is at what point a simple group is turning into an effective team. Even though the development process of group into a team is not a linear process, the models found in the literature provides a rich framework for analyzing and identifying the features which group acquires over time till it become a team in the true sense of word. Thus, in this article we propose an analysis of the main models of group development in order to point out, even in a relative manner, the stage when the simple work group becomes an effective work team.

  19. Investigating the Effectiveness of Group Work in Mathematics

    Science.gov (United States)

    Sofroniou, Anastasia; Poutos, Konstantinos

    2016-01-01

    Group work permits students to develop a range of critical thinking, analytical and communication skills; effective team work; appreciation and respect for other views, techniques and problem-solving methods, all of which promote active learning and enhance student learning. This paper presents an evaluation of employing the didactic and…

  20. Applying an Activity System to Online Collaborative Group Work Analysis

    Science.gov (United States)

    Choi, Hyungshin; Kang, Myunghee

    2010-01-01

    This study determines whether an activity system provides a systematic framework to analyse collaborative group work. Using an activity system as a unit of analysis, the research examined learner behaviours, conflicting factors and facilitating factors while students engaged in collaborative work via asynchronous computer-mediated communication.…

  1. Physical Workload and Work Capacity across Occupational Groups.

    Directory of Open Access Journals (Sweden)

    Stefanie Brighenti-Zogg

    Full Text Available This study aimed to determine physical performance criteria of different occupational groups by investigating physical activity and energy expenditure in healthy Swiss employees in real-life workplaces on workdays and non-working days in relation to their aerobic capacity (VO2max. In this cross-sectional study, 337 healthy and full-time employed adults were recruited. Participants were classified (nine categories according to the International Standard Classification of Occupations 1988 and merged into three groups with low-, moderate- and high-intensity occupational activity. Daily steps, energy expenditure, metabolic equivalents and activity at different intensities were measured using the SenseWear Mini armband on seven consecutive days (23 hours/day. VO2max was determined by the 20-meter shuttle run test. Data of 303 subjects were considered for analysis (63% male, mean age: 33 yrs, SD 12, 101 from the low-, 102 from the moderate- and 100 from the high-intensity group. At work, the high-intensity group showed higher energy expenditure, metabolic equivalents, steps and activity at all intensities than the other groups (p<0.001. There were no significant differences in physical activity between the occupational groups on non-working days. VO2max did not differ across groups when stratified for gender. The upper workload limit was 21%, 29% and 44% of VO2max in the low-, moderate- and high-intensity group, respectively. Men had a lower limit than women due to their higher VO2max (26% vs. 37%, when all groups were combined. While this study did confirm that the average workload limit is one third of VO2max, it showed that the average is misrepresenting the actual physical work demands of specific occupational groups, and that it does not account for gender-related differences in relative workload. Therefore, clinical practice needs to consider these differences with regard to a safe return to work, particularly for the high-intensity group.

  2. Physical Workload and Work Capacity across Occupational Groups

    Science.gov (United States)

    Brighenti-Zogg, Stefanie; Mundwiler, Jonas; Schüpbach, Ulla; Dieterle, Thomas; Wolfer, David Paul; Leuppi, Jörg Daniel; Miedinger, David

    2016-01-01

    This study aimed to determine physical performance criteria of different occupational groups by investigating physical activity and energy expenditure in healthy Swiss employees in real-life workplaces on workdays and non-working days in relation to their aerobic capacity (VO2max). In this cross-sectional study, 337 healthy and full-time employed adults were recruited. Participants were classified (nine categories) according to the International Standard Classification of Occupations 1988 and merged into three groups with low-, moderate- and high-intensity occupational activity. Daily steps, energy expenditure, metabolic equivalents and activity at different intensities were measured using the SenseWear Mini armband on seven consecutive days (23 hours/day). VO2max was determined by the 20-meter shuttle run test. Data of 303 subjects were considered for analysis (63% male, mean age: 33 yrs, SD 12), 101 from the low-, 102 from the moderate- and 100 from the high-intensity group. At work, the high-intensity group showed higher energy expenditure, metabolic equivalents, steps and activity at all intensities than the other groups (pphysical activity between the occupational groups on non-working days. VO2max did not differ across groups when stratified for gender. The upper workload limit was 21%, 29% and 44% of VO2max in the low-, moderate- and high-intensity group, respectively. Men had a lower limit than women due to their higher VO2max (26% vs. 37%), when all groups were combined. While this study did confirm that the average workload limit is one third of VO2max, it showed that the average is misrepresenting the actual physical work demands of specific occupational groups, and that it does not account for gender-related differences in relative workload. Therefore, clinical practice needs to consider these differences with regard to a safe return to work, particularly for the high-intensity group. PMID:27136206

  3. Report for the 2014 DCEE Working Group Meeting

    DEFF Research Database (Denmark)

    Jensen, Lotte Bjerregaard; Thompson, Mary Kathryn

    2014-01-01

    The DCEE 2014 meeting at the Technical University of Denmark focused on interdisciplinarity in design processes while embracing the central issues of the previous workshops: design tools / methods and design education in Civil and Environmental Engineering (CEE)....

  4. Cultural diversity and work-group performance : Detecting the rules

    NARCIS (Netherlands)

    Girndt, T.

    2000-01-01

    With greater levels of international cooperation, work-groups are increasingly composed of members from different cultures. These groups often suffer from communication problems; however, research suggests that they also benefit from their members cultural diversity and generate higher ranges of

  5. Facilitating Support Groups for Professionals Working with People with AIDS.

    Science.gov (United States)

    Grossman, Arnold H.; Silverstein, Charles

    1993-01-01

    Describes support groups for health care professionals who work with people with human immunodeficiency virus (HIV) or Acquired Immune Deficiency Syndrome (AIDS) and who are experiencing burnout from excessive demands on their energy, strength, and resources. Discusses group administration, effective intervention techniques, and issues of health…

  6. Understanding the Process by Which New Employees Enter Work Groups

    Science.gov (United States)

    Summers, Donald B.

    1977-01-01

    The Group Integration Process, described in this article, serves as a broad and guiding set of steps (invitation, induction, orientation, training, relationship, and integration) that helps the supervisor better understand what is to be done in managing a new employee's entrance into a work group. (TA)

  7. From an Idea to a Working Robot Prototype: Distributing Knowledge of Robotics through Science Museum Workshops

    Science.gov (United States)

    Polishuk, Alexander; Verner, Igor; Mir, Ronen

    This paper presents our experience of teaching robotics to primary and middle school students at the Gelfand Center for Model Building, Robotics & Communication which is part of the Israel National Museum of Science, Technology and Space (MadaTech). The educational study examines the value and characteristics of students’ teamwork in the museum robotics workshops.

  8. Solvent exposure and related work practices amongst apprentice spray painters in automotive body repair workshops.

    Science.gov (United States)

    Winder, C; Turner, P J

    1992-08-01

    As part of a multidisciplinary study into the health effects of solvents, workplace assessments and airborne solvent vapour monitoring was conducted in 46 spray painting workshops in the Sydney metropolitan area. Breathing-zone samples were taken from 50 apprentices and 14 experienced spray painters. An interview schedule was developed to obtain information about the use of acrylic or two-pack paint systems, the use of engineering controls, the use of personal protective equipment and the availability of material safety data sheets. Contaminants typical of the chemical products used in this industry were encountered (aromatic hydrocarbons, C5-C7 aliphatic hydrocarbons, ketones, esters). The results of airborne solvent monitoring indicate a total solvent exposure in the range 1-99% of a combined Worksafe Australia exposure standard, with a mean of 19%. Solvent exposure was highest when spraying acrylic paint in the open workshop and lowest when spraying two pack paint in a spray booth. Much the same personal protective equipment was available in all workshops, but wide variation in its use was observed. Material safety data sheets were not observed in any of the workshops.

  9. Group dream work as a support for self – awareness

    OpenAIRE

    Brumen Žarn, Zarja

    2016-01-01

    Master's thesis discusses group dream work as a form of support for increasing the individual's self-awareness. Working with dreams encourages creativity, opens up the possibilities of self-knowing and helps individuals to guide their life paths. One of the fundamental concepts of social pedagogy is the empowerment of individuals for problem solving and self-development. For this purpose, social educational profession develops and uses a number of methods and approaches. Working with dreams i...

  10. Waste Contaminants at Military Bases Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The Waste Contaminants at Military Bases Working Group has screened six prospective demonstration projects for consideration by the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT). These projects include the Kirtland Air Force Base Demonstration Project, the March Air Force Base Demonstration Project, the McClellan Air Force Base Demonstration Project, the Williams Air Force Base Demonstration Project, and two demonstration projects under the Air Force Center for Environmental Excellence. A seventh project (Port Hueneme Naval Construction Battalion Center) was added to list of prospective demonstrations after the September 1993 Working Group Meeting. This demonstration project has not been screened by the working group. Two additional Air Force remediation programs are also under consideration and are described in Section 6 of this document. The following information on prospective demonstrations was collected by the Waste Contaminants at Military Bases Working Group to assist the DOIT Committee in making Phase 1 Demonstration Project recommendations. The remainder of this report is organized into seven sections: Work Group Charter's mission and vision; contamination problems, current technology limitations, and institutional and regulatory barriers to technology development and commercialization, and work force issues; screening process for initial Phase 1 demonstration technologies and sites; demonstration descriptions -- good matches;demonstration descriptions -- close matches; additional candidate demonstration projects; and next steps

  11. Flattening the organization: implementing self-directed work groups.

    Science.gov (United States)

    Brandon, G M

    1996-01-01

    In response to tremendous growth of managed care and threats to financial stability and job security, the Greater Baltimore Medical Center (GBMC) restructured itself into independent business units. The radiology department at GBMC resolved to reduce cost per unit-of-service, improve service, determine optimal staffing levels and reduce the number of layers of organization. It was decided to achieve those goals by implementing self-directed work groups. Staff buy-in was critical to success of the project. To begin, the staff was educated intensively about current trends in healthcare, managed care and potential changes in the job market. The radiology department was allowed to reduce the size of its staff through attrition and worked hard to focus staff concern on the impact each individual could have on the bottom line and the resultant effect on job security. Self-directed work groups were designed on a matrix that used small "service teams" in combinations to form larger "work groups." Actual work and daily activities occur at the service team level; information exchange and major decisions occue at the work group level. Seventeen months after beginning the project and 10 months after implementation, the organization has flattened, staff members have adjusted well to new roles, there have been no lay-offs, and the matrix system of small and large groups have proved particularly valuable.

  12. Working Group on Isotopes in Hydrology, Grenoble, October 1965

    International Nuclear Information System (INIS)

    1966-08-01

    The purpose of this Working Group organised by the International Atomic Energy Agency, which met at the Centre d'Etudes Nucleaires in Grenoble by invitation of the French Atomic Energy Commission, was to provide an opportunity for the different groups engaged upon the use of isotope techniques in hydrology to discuss their present work and indicate the main lines of future work. In accordance with the decision of the meeting, members of the Section of Hydrology of the Agency have prepared this report based on written contributions submitted by participants of the meeting and on the discussions which took place. It is hoped that this report will be of interest not only to groups engaged in this work but also to hydrologists wishing to know what types of studies are in progress and where they are being carried

  13. Summary of the eighth conference on protection against radon at home and at work and the 13. workshop on the geological aspects of radon risk mapping

    International Nuclear Information System (INIS)

    Navratilova Rovenska, K.; Thinova, L.; Neznal, M.

    2017-01-01

    This paper provides summary of the 8. Conference on Protection against Radon at Home and at Work and 13. Workshop on the Geological Aspects of Radon Risk Mapping held in September 2016 in Prague, Czech Republic. (authors)

  14. Workshop meeting

    International Nuclear Information System (INIS)

    Veland, Oeystein

    2004-04-01

    1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

  15. Background and future activities of PBNCC's nuclear training working group

    International Nuclear Information System (INIS)

    Chong Hun Rieh; Kunmo Chung; Hamlin, K.W.

    1987-01-01

    This paper presents a review of the background and activities of the nuclear training working group of the Pacific Basin Nuclear Cooperation Committee. The working group has examined various mechanisms for regional cooperation including the development of aregional catalog of training programs and the conceptualization of sharing training facilities among nuclear operators in the region. The working group has focused its attention on the exchange of information on the on-going training programs, operator training facilities, available resources for training assistance and proposed cooperative schemes. These activities are expected to continue and will provide invaluable information for nuclear power programs in the Pacific Basin region. The group also reviewed problems and issues associated with developing regional cooperation. (author)

  16. Background and future activities of PBNCC's nuclear training working group

    International Nuclear Information System (INIS)

    Rieh, C.H.; Chung, K.; Hamlin, K.W.

    1988-01-01

    This paper presents a review of the background and activities of the nuclear training working group of the Pacific Basin Nuclear Cooperation Committee. The working group has examined various mechanisms for regional cooperation including the development of a regional catalog of training programs and the conceptualization of sharing training facilities among nuclear operators in the region. The working group has focused its attention on the exchange of information on the on-going training programs, operator training facilities, available resources for training assistance and proposed cooperative schemes. These activities are expected to continue and will provide invaluable information for nuclear power programs in the Pacific Basin region. The group also reviewed problems and issues associated with developing regional cooperation

  17. Standardization activities of the Euratom Neutron Radiography Working Group

    International Nuclear Information System (INIS)

    Domanus, J.

    1982-06-01

    In 1979 a working group on neutron radiography was formed at Euratom. The purpose of this group is the standardization of neutron radiographic methods in the field of nuclear fuel. Activities of this Neutron Radiography Working Group are revised. Classification of defects revealed by neutron radiography is illustrated in a special atlas. Beam purity and sensitivity indicators are tested together with a special calibration fuel pin. All the Euratom neutron radiography centers will perform comparative neutron radiography with those items. The measuring results obtained, using various measuring aparatus will form the basis to formulate conclusions about the best measuring methods and instruments to be used in that field. Besides the atlas of neutron radiographic findings in light water reactor fuel, the Euratom Neutron Radiogrphy Working Group has published a neutron radiography handbook in which the neutron radiography installations in the European Community are also described. (author)

  18. The International Space Life Sciences Strategic Planning Working Group

    Science.gov (United States)

    White, Ronald J.; Rabin, Robert; Lujan, Barbara F.

    1993-01-01

    Throughout the 1980s, ESA and the space agencies of Canada, Germany, France, Japan, and the U.S. have pursued cooperative projects bilaterally and multilaterally to prepare for, and to respond to, opportunities in space life sciences research previously unapproachable in scale and sophistication. To cope effectively with likely future space research opportunities, broad, multilateral, coordinated strategic planning is required. Thus, life scientists from these agencies have allied to form the International Space Life Sciences Strategic Planning Working Group. This Group is formally organized under a charter that specifies the purpose of the Working Group as the development of an international strategic plan for the space life sciences, with periodic revisions as needed to keep the plan current. The plan will be policy-, not operations-oriented. The Working Group also may establish specific implementation teams to coordinate multilateral science policy in specific areas; such teams have been established for space station utilization, and for sharing of flight equipment.

  19. Annual report of the Summit Members' Working Group on Controlled Thermonuclear Fusion (Fusin Working Group (FWG))

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1987-04-01

    The Summit Members' Working Group on Controlled Thermonuclear Fusion (Fusion Working Group (FWG)) was established in 1983 in response to the Declaration of the Heads of State and Government at the Versailles Economic Summit meeting of 1982, and in response to the subsequent report of the Working Group in Technology, Growth and Employment (TGE) as endorsed at the Williamsburg Summit meeting, 1983. This document contains the complete written record of each of the three FWG meetings which include the minutes, lists of attendees, agendas, statements, and summary conclusions as well as the full reports of the Technical Working Party. In addition, there is a pertinent exchange of correspondence between FWG members on the role of the Technical Working Party and a requested background paper on the modalities associated with a possible future ETR project.

  20. Report on Workshop "Planning of Future Science in the Polar Ocean Study with Cooperation among Study Groups"

    Directory of Open Access Journals (Sweden)

    Mitsuo Fukuchi

    2001-03-01

    Full Text Available A workshop on "Planning of Future Science in the Polar Ocean Study with Cooperation among Study Groups" was held on November 1,2000,at the National Institute of Polar Research with 21 participants. In this workshop, a plan to charter a research vessel other than "Shirase" was introduced and a science plan using the chartered research vessel by 43rd Japanese Antarctic Research Expedition was discussed. This study is going to be conducted in the sea ice area around 140-150°E in mid-summer (February 2002, when biological production becomes active in the Antarctic Ocean. Oceanographic observations using "Shirase" are difficult to conduct in this season since she supports a wide range of summer operations around Syowa Station. The relationships between biological production and greenhouse effect gas production and the vertical transport of organic materials from the surface to deep ocean will be the focus of this study. At this stage, one deputy leader and three members of JARE, and 25-26 other scientists including graduate students and foreign scientists, will participate in the field observations using the chartered vessel. The members of JARE will conduct a project science program of the VI Phase of JARE, while the other participants will do part of the science program "Antarctic Ocean in Earth System". Since further observations for several years after the summer of 2002 will be required to understand the role of the Antarctic Ocean in global climate change, we have applied for a Grant-in-Aid for Scientific Research for the next project, which will start from 2001,to the Ministry of Education, Science, Sports and Culture of Japan. The proposal was discussed in detail in this workshop.

  1. Workshop on Subcritical Neutron Production

    International Nuclear Information System (INIS)

    Walter Sadowski; Roald Sagdeev

    2006-01-01

    of current fusion technology to utilize the actinides for generating energy and destroying long-lived fission products calls for a greater international effort in the area of fusion driven sub-critical systems The Workshop recommends that a series of steps be carried out by the technical community leading to a proof-of-principle facility. The workshop strongly recommends that the fusion community work closely with other technical communities to ensure that a wider range of technical solutions is available to solve the spent fuel problem and to utilize the current actinide inventories. The workshop formed a small group to facilitate follow-up interactions and cooperative work. It was agreed that a follow-on workshop, possibly under the aegis of the IAEA, will be held in April of 2005

  2. Progress report on the work of sub-group B

    International Nuclear Information System (INIS)

    Buck, C.; Tamiya, S.

    1979-01-01

    This paper reviews sub group B's 11 tasks, commenting upon each and noting what work remains to be done and the procedure adopted for completing it. The majority of the tasks have been completed and it was decided that further consideration of their assessment of proliferation resistance, institutional and safeguards questions and the economic assessment of reprocessing be carried out jointly with sub group A. It was also agreed that all further meetings of sub group B should take place jointly with sub group A

  3. Nuclear Forensics: Report of the AAAS/APS Working Group

    Science.gov (United States)

    Tannenbaum, Benn

    2008-04-01

    This report was produced by a Working Group of the American Physical Society's Program on Public Affairs in conjunction with the American Association for the Advancement of Science Center for Science, Technology and Security Policy. The primary purpose of this report is to provide the Congress, U.S. government agencies and other institutions involved in nuclear forensics with a clear unclassified statement of the state of the art of nuclear forensics; an assessment of its potential for preventing and identifying unattributed nuclear attacks; and identification of the policies, resources and human talent to fulfill that potential. In the course of its work, the Working Group observed that nuclear forensics was an essential part of the overall nuclear attribution process, which aims at identifying the origin of unidentified nuclear weapon material and, in the event, an unidentified nuclear explosion. A credible nuclear attribution capability and in particular nuclear forensics capability could deter essential participants in the chain of actors needed to smuggle nuclear weapon material or carry out a nuclear terrorist act and could also encourage states to better secure such materials and weapons. The Working Group also noted that nuclear forensics result would take some time to obtain and that neither internal coordination, nor international arrangements, nor the state of qualified personnel and needed equipment were currently enough to minimize the time needed to reach reliable results in an emergency such as would be caused by a nuclear detonation or the intercept of a weapon-size quantity of material. The Working Group assesses international cooperation to be crucial for forensics to work, since the material would likely come from inadequately documented foreign sources. In addition, international participation, if properly managed, could enhance the credibility of the deterrent effect of attribution. Finally the Working Group notes that the U.S. forensics

  4. IAU Astronomy for Equity and Inclusion Working Group

    Science.gov (United States)

    Ortiz-Gil, A.; García, B.; WG3 of Commission C1 Division C of the IAU

    2017-03-01

    In this talk we present the aims, goals and activities that have been started by the working group on Astronomy for Equity and Inclusion. This working group is part of Commission 1 ''Astronomy Education and Development'' of Division C ''Education, Outreach and Heritage'' of the International Astronomical Union (IAU). The working group was born with the aim of developing new strategies and resources to promote the access to Astronomy, both at the profesional and outreach levels, for persons with special needs or for those who could be excluded because of race or sexual orientation (among other reasons). It is composed of astronomers affiliated with the IAU and other volunteers who work in astronomy, education and special needs, as well as partner organizations like the IAU Office of Astronomy for Development (OAD), Astronomers without Borders (AWB), the Galileo Teacher Training Program (GTTP) or Universe Awareness (UNAWE). To reach those goals we have started different initiatives which are outlined at the working group’s website, like a repository of resources or the creation of a document about good practices, and the establishment of a tight collaboration with the Working Group about Accessibility of the American Astronomical Society, which was formed recently too.

  5. SUMMARY OF GENERAL WORKING GROUP A+B+D: CODES BENCHMARKING.

    Energy Technology Data Exchange (ETDEWEB)

    WEI, J.; SHAPOSHNIKOVA, E.; ZIMMERMANN, F.; HOFMANN, I.

    2006-05-29

    Computer simulation is an indispensable tool in assisting the design, construction, and operation of accelerators. In particular, computer simulation complements analytical theories and experimental observations in understanding beam dynamics in accelerators. The ultimate function of computer simulation is to study mechanisms that limit the performance of frontier accelerators. There are four goals for the benchmarking of computer simulation codes, namely debugging, validation, comparison and verification: (1) Debugging--codes should calculate what they are supposed to calculate; (2) Validation--results generated by the codes should agree with established analytical results for specific cases; (3) Comparison--results from two sets of codes should agree with each other if the models used are the same; and (4) Verification--results from the codes should agree with experimental measurements. This is the summary of the joint session among working groups A, B, and D of the HI32006 Workshop on computer codes benchmarking.

  6. Neural activity reveals perceptual grouping in working memory.

    Science.gov (United States)

    Rabbitt, Laura R; Roberts, Daniel M; McDonald, Craig G; Peterson, Matthew S

    2017-03-01

    There is extensive evidence that the contralateral delay activity (CDA), a scalp recorded event-related brain potential, provides a reliable index of the number of objects held in visual working memory. Here we present evidence that the CDA not only indexes visual object working memory, but also the number of locations held in spatial working memory. In addition, we demonstrate that the CDA can be predictably modulated by the type of encoding strategy employed. When individual locations were held in working memory, the pattern of CDA modulation mimicked previous findings for visual object working memory. Specifically, CDA amplitude increased monotonically until working memory capacity was reached. However, when participants were instructed to group individual locations to form a constellation, the CDA was prolonged and reached an asymptote at two locations. This result provides neural evidence for the formation of a unitary representation of multiple spatial locations. Published by Elsevier B.V.

  7. OVERVIEW OF THE ACTIVITIES OF THE NUCLEAR ENERGY AGENCY WORKING GROUP ON EXTERNAL EVENTS

    Energy Technology Data Exchange (ETDEWEB)

    Nakoski, John A.; Smith, Curtis L.; Kim, Min Kyu

    2016-10-01

    The Orgranisation for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) has established a Working Group on External Events (WGEV) that provides a forum for subject matter experts from the nuclear industry and regulators to improve the understanding and treatment of external hazards that would support the continued safety performance of nuclear installations, and improve the effectiveness of regulatory practices, in NEA member countries. This report provides a description of the ongoing work of the WGEV. The work of the WGEV includes the collection of information and conducting a workshop on severe weather and storm surge that brought together a diverse group of subject matter experts to identify commendable practices related to the treatment of severe weather and storm surge consideration in regulatory and operational decision-making. Other work of the WGEV includes looking at science-based screening of external events that are factored into decisions on the safe operation of nuclear facilities; and identification of commendable practices and knowledge gaps on riverine flooding.

  8. Development and Implementation of a Workshop to Enhance the Effectiveness of Mentors Working with Diverse Mentees in HIV Research

    Science.gov (United States)

    Fernandez, Alicia; Stoff, David M.; Narahari, Swathi; Blank, Michael; Fuchs, Jonathan; Evans, Clyde H.; Kahn, James S.; Johnson, Mallory O.

    2014-01-01

    Abstract A growing body of evidence highlights the importance of competent mentoring in academic research in the field of HIV, particularly for early stage investigators from diverse, underrepresented backgrounds. We describe the development and implementation of a 2-day intensive workshop to train mid-level and senior-level investigators conducting HIV-related clinical and translational research across multiple academic institutions on more effective mentoring, with an emphasis on techniques to foster mentees of diversity. The workshop was focused on training mentors in techniques designed to improve the effectiveness of the mentor–mentee relationship, and included didactic presentations, interactive discussions, and small-group problem-based learning activities. Mid-level or senior-level faculty involved or planning to be involved in significant mentorship activities related to HIV research were eligible. Surveys and formal actions plans allowed for workshop evaluation and laid the groundwork for subsequent workshops. Twenty-six faculty from 16 U.S.-based institutions participated, with good representation across discipline, gender, and race/ethnicity. The sessions were highly rated and discussions and evaluations revealed important barriers and facilitators to mentoring, challenges and solutions related to mentoring mentees from diverse backgrounds, and specific tools to enhance mentoring effectiveness. The Mentoring the Mentors training program for HIV researchers focusing on early career investigators of diversity was the first of its kind and was well attended, was rated highly, and provided guidance for improving the program in the future. This training program fills an important gap in the HIV researcher community and offers guidance for training mentors interested in diversity issues in settings outside of HIV. PMID:24735004

  9. Group Work with Adolescents: Principles and Practice. Second Edition. Social Work Practice with Children and Families

    Science.gov (United States)

    Malekoff, Andrew

    2006-01-01

    This popular text provides essential knowledge and skills for conducting creative, strengths-based group work with adolescents. A rich introduction to the field, enlivened by numerous illustrations from actual sessions, the book provides principles and guidelines for practice in a wide range of settings. The book covers all phases of group work,…

  10. Group Work Education in Social Work: A Review of the Literature Reveals Possible Solutions

    Science.gov (United States)

    LaRocque, Sarah E.

    2017-01-01

    This article examines the growing concerns in the literature that traditional group work education in social work is not providing the foundational knowledge, skills, evidence-based practice, professional uses of self, and adherence to practice standards necessary for effective group practice. An exploration of the best available evidence on group…

  11. Cultivating and Benefiting from Member Familiarity in Temporary Work Groups

    DEFF Research Database (Denmark)

    Hessel, Shannon

    In this paper, I investigate an example of short-duration, time-bound project work conducted by high-performing groups in order to surprise our expectations regarding the motivations and potential to cooperate and to cultivate group member familiarity within such temporary organizations. Project...... limited time and a perceived short shadow of the future. Several contributions result: First, I challenge our expectation that a short shadow of the future will decrease the likelihood of cooperation by demonstrating how the clan-like tendency to construct common values and aspirations motivated...... cooperative behavior in these groups. Second, I challenge our expectation that a task-oriented over relationship-oriented approach will inevitably dominate work when projects are time-bound and of short duration by describing moments in which these groups chose relationship-oriented activities despite time...

  12. UTM Data Working Group Demonstration 1: Final Report

    Science.gov (United States)

    Rios, Joseph L.; Mulfinger, Daniel G.; Smith, Irene S.; Venkatesan, Priya; Smith, David R.; Baskaran, Vijayakumar; Wang, Leo

    2017-01-01

    This document summarizes activities defining and executing the first demonstration of the NASA-FAA Research Transition Team (RTT) Data Exchange and Information Architecture (DEIA) working group (DWG). The demonstration focused on testing the interactions between two key components in the future UAS Traffic Management (UTM) System through a collaborative and distributed simulation of key scenarios. The summary incorporates written feedback from each of the participants in the demonstration. In addition to reporting the activities, this report also provides some insight into future steps of this working group.

  13. Enhancing the Effectiveness of Work Groups and Teams: A Reflection.

    Science.gov (United States)

    Kozlowski, Steve W J

    2018-03-01

    Teamwork has been at the core of human accomplishment across the millennia, and it was a focus of social psychological inquiry on small group behavior for nearly half a century. However, as organizations world-wide reorganized work around teams over the past two decades, the nature of teamwork and factors influencing it became a central focus of research in organizational psychology and management. In this article, I reflect on the impetus, strategy, key features, and scientific contribution of "Enhancing the Effectiveness of Work Groups and Teams," by Kozlowski and Ilgen, a review monograph published in Psychological Science in the Public Interest in 2006.

  14. GeneLab Analysis Working Group Kick-Off Meeting

    Science.gov (United States)

    Costes, Sylvain V.

    2018-01-01

    Goals to achieve for GeneLab AWG - GL vision - Review of GeneLab AWG charter Timeline and milestones for 2018 Logistics - Monthly Meeting - Workshop - Internship - ASGSR Introduction of team leads and goals of each group Introduction of all members Q/A Three-tier Client Strategy to Democratize Data Physiological changes, pathway enrichment, differential expression, normalization, processing metadata, reproducibility, Data federation/integration with heterogeneous bioinformatics external databases The GLDS currently serves over 100 omics investigations to the biomedical community via open access. In order to expand the scope of metadata record searches via the GLDS, we designed a metadata warehouse that collects and updates metadata records from external systems housing similar data. To demonstrate the capabilities of federated search and retrieval of these data, we imported metadata records from three open-access data systems into the GLDS metadata warehouse: NCBI's Gene Expression Omnibus (GEO), EBI's PRoteomics IDEntifications (PRIDE) repository, and the Metagenomics Analysis server (MG-RAST). Each of these systems defines metadata for omics data sets differently. One solution to bridge such differences is to employ a common object model (COM) to which each systems' representation of metadata can be mapped. Warehoused metadata records are then transformed at ETL to this single, common representation. Queries generated via the GLDS are then executed against the warehouse, and matching records are shown in the COM representation (Fig. 1). While this approach is relatively straightforward to implement, the volume of the data in the omics domain presents challenges in dealing with latency and currency of records. Furthermore, the lack of a coordinated has been federated data search for and retrieval of these kinds of data across other open-access systems, so that users are able to conduct biological meta-investigations using data from a variety of sources. Such meta

  15. Group Work Tests for Context-Rich Problems

    Science.gov (United States)

    Meyer, Chris

    2016-05-01

    The group work test is an assessment strategy that promotes higher-order thinking skills for solving context-rich problems. With this format, teachers are able to pose challenging, nuanced questions on a test, while providing the support weaker students need to get started and show their understanding. The test begins with a group discussion phase, when students are given a "number-free" version of the problem. This phase allows students to digest the story-like problem, explore solution ideas, and alleviate some test anxiety. After 10-15 minutes of discussion, students inform the instructor of their readiness for the individual part of the test. What follows next is a pedagogical phase change from lively group discussion to quiet individual work. The group work test is a natural continuation of the group work in our daily physics classes and helps reinforce the importance of collaboration. This method has met with success at York Mills Collegiate Institute, in Toronto, Ontario, where it has been used consistently for unit tests and the final exam of the grade 12 university preparation physics course.

  16. Introduction of the UNIX International Performance Management Work Group

    Science.gov (United States)

    Newman, Henry

    1993-01-01

    In this paper we presented the planned direction of the UNIX International Performance Management Work Group. This group consists of concerned system developers and users who have organized to synthesize recommendations for standard UNIX performance management subsystem interfaces and architectures. The purpose of these recommendations is to provide a core set of performance management functions and these functions can be used to build tools by hardware system developers, vertical application software developers, and performance application software developers.

  17. The Fisheries and Marine Renewable Energy Working Group: creating an agenda for improved co-existence.

    Science.gov (United States)

    Campbell, M. S.; De Groot, J.; Ashley, M.; Rodwell, L.

    2014-12-01

    As an emerging industry, Marine Renewable Energy (MRE) is expected to play a major contributory role if the UK is to successfully reach its desired target of renewable energy production by 2020. However, due to the competing objectives and priorities of MRE and other industries, for example fisheries, and in the delivering of conservation measures, the demand for space within our marine landscape is increasing, and interactions are inevitable. In order to promote better understanding of the challenges in resolving interactions between these industries, a Fisheries and Marine Renewable Energy Working Group was set up under the Natural Environment Research Council Marine Renewable Energy Knowledge Exchange Programme (NERC MREKEP). The Working Group carried out an initial scoping survey in order to summarise recent and current research activities and identify key issues and topics in the fields of fisheries and MRE interactions. Mixed stakeholder groups discussed four primary topics: priority issues; barriers to progress; problem mitigation; and thoughts on the consultation process. Points of discussion were categorized into themes to aid analysis and protocol development. These themes were: culture, community and economy; legislation and rights; data and information; and collaboration and communication. Subsequent invited stakeholder and expert panel workshops were held to facilitate knowledge exchange between fisheries and development of MRE in order to identify priority research issues, knowledge gaps and collaboration needs. Four group sessions identified: practical steps to aid interaction between industries; barriers, opportunities and solutions; an agenda for action, timescales and partners; and action points carried forward by each stakeholder group. This Working Group, guided under the MREKEP banner, is the first of its kind in the UK, bringing together individuals from a nationally diverse group of academics, regulators, policy makers and representatives

  18. Workshop on the RHIC performance

    Energy Technology Data Exchange (ETDEWEB)

    Khiari, F.; Milutinovic, J.; Ratti, A.; Rhoades-Brown, M.J. (eds.)

    1988-07-01

    The most recent conceptual design manual for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven was published in May 1986 (BNL 51932). The purpose of this workshop was to review the design specifications in this RHIC reference manual, and to discuss in detail possible improvements in machine performance by addressing four main areas. These areas are beam-beam interactions, stochastic cooling, rf and bunch instabilities. The contents of this proceedings are as follows. Following an overview of the workshop, in which the motivation and goals are discussed in detail, transcripts of the first day talks are given. Many of these transcripts are copies of the original transparencies presented at the meeting. The following four sections contain contributed papers, that resulted from discussions at the workshop within each of the four working groups. In addition, there is a group summary for each of the four working groups at the beginning of each section. Finally, a list of participants is given.

  19. Investigating the LGBTQ Responsive Model for Supervision of Group Work

    Science.gov (United States)

    Luke, Melissa; Goodrich, Kristopher M.

    2013-01-01

    This article reports an investigation of the LGBTQ Responsive Model for Supervision of Group Work, a trans-theoretical supervisory framework to address the needs of lesbian, gay, bisexual, transgender, and questioning (LGBTQ) persons (Goodrich & Luke, 2011). Findings partially supported applicability of the LGBTQ Responsive Model for Supervision…

  20. 77 FR 70421 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2012-11-26

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Department of the Air Force, DoD. ACTION: Meeting Notice. SUMMARY: This meeting notice is to inform GPS...

  1. 78 FR 63459 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2013-10-24

    ... DEPARTMENT OF DEFENSE Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Department of the Air Force. ACTION: Meeting Notice. SUMMARY: This meeting notice is to inform GPS simulator manufacturers, who supply products to the Department of Defense (DoD), and GPS simulator users, both government...

  2. Recent activities of the ESARDA working group on NDA

    International Nuclear Information System (INIS)

    Harry, R.J.S.

    1983-01-01

    The European Safeguards Research and Development Association, ESARDA, has one of the largest coordinated safeguards and development programs in the world. There are several working groups for specific R and D activities. One of these is the ''ESARDA Working Group on Techniques and Standards for non-Destructive Analysis''. The NDA working group has initiated the international project of the preparation of uranium oxide certified reference materials for the gamma spectrometric determination of the enrichment, which are made in a collaboration with the US NBS and the European Communities' Central Bureau for Nuclear Measurements, CBNM, at Geel. The possibility of a similar type of reference material for Pu isotopic abundance measurements is investigated at CBNM, and the pilot samples may become available for intercomparisons. Safeguards acceptability and users manual have been considered carefully. The working group has undertaken an intercomparison on the determination of plutonium isotopic ratios by gamma spectrometry, using NBS-SRM's-946, -947 and 948. A new exercise on 0,5 gram samples of seven different isotopic compositions samples will be executed under the name PIDIE (Plutonium Isotopic Determination Intercomparison Exercise)

  3. The OMERACT Ultrasound Working Group 10 Years On

    DEFF Research Database (Denmark)

    Bruyn, George A; Naredo, Esperanza; Iagnocco, Annamaria

    2015-01-01

    Musculoskeletal ultrasound (US) now thrives as an established imaging modality for the investigation and management of chronic inflammatory arthritis. We summarize here results of the Outcome Measures in Rheumatology (OMERACT) US working group (WG) projects of the last 2 years. These results were...

  4. 78 FR 67132 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2013-11-08

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group... simulator manufacturers, who supply products to the Department of Defense (DoD), and GPS simulator users..., and email address) to [email protected]us.af.mil and have your security personnel submit your VAR...

  5. Online Group Work Design: Processes, Complexities, and Intricacies

    Science.gov (United States)

    Kleinsasser, Robert; Hong, Yi-Chun

    2016-01-01

    This paper describes the challenges of designing and implementing online group work. We are responsible for a seven-and-a-half week's online literacy and bi-literacy graduate course in a Bilingual/English as a Second Language (BLE/ESL) Master of Arts program. One of the tasks includes online literacy circle exchanges where students are encouraged…

  6. ACPSEM brachytherapy working group recommendations for quality assurance in brachytherapy

    International Nuclear Information System (INIS)

    Dempsey, Claire; Smith, Ryan; Nyathi, Thulani; Ceylan, Abdurrahman; Howard, Lisa; Patel, Virendra; Dam, Ras; Haworth, Annette

    2013-01-01

    The Australasian College of Physical Scientists and Engineers in Medicine (ACPSEM) Radiation Oncology Specialty Group (ROSG) formed a series of working groups in 2011 to develop recommendation papers for guidance of radiation oncology medical physics practice within the Australasian setting. These recommendations are intended to provide guidance for safe work practices and a suitable level of quality control without detailed work instructions. It is the responsibility of the medical physicist to ensure that locally available equipment and procedures are sufficiently sensitive to establish compliance to these recommendations. The recommendations are endorsed by the ROSG, have been subject to independent expert reviews and have also been approved by the ACPSEM Council. For the Australian audience, these recommendations should be read in conjunction with the Tripartite Radiation Oncology Practice Standards. This publication presents the recommendations of the ACPSEM Brachytherapy Working Group (BTWG) and has been developed in alignment with other international associations. However, these recommendations should be read in conjunction with relevant national, state or territory legislation and local requirements, which take precedence over the ACPSEM recommendation papers. It is hoped that the users of this and other ACPSEM recommendation papers will contribute to the development of future versions through the Radiation Oncology Specialty Group of the ACPSEM.

  7. Division X Working Group on Historic Radio Astronomy

    NARCIS (Netherlands)

    Orchiston, Wayne; Kellermann, Kenneth I.; Davies, Rodney D.; Débarbat, Suzanne V.; Morimoto, Masaki; Slysh, Slava; Swarup, Govind; van Woerden, Hugo; Wall, Jasper V.; Wielebinski, Richard

    During the Rio General Assembly we held the following meetings of the Working Group: a Business Meeting, a Science Meeting on “The Development of Aperture Synthesis Imaging in Radio Astronomy”, and a Science Meeting on “Recent Research”.

  8. Improving Group Work Practices in Teaching Life Sciences: Trialogical Learning

    Science.gov (United States)

    Tammeorg, Priit; Mykkänen, Anna; Rantamäki, Tomi; Lakkala, Minna; Muukkonen, Hanni

    2017-08-01

    Trialogical learning, a collaborative and iterative knowledge creation process using real-life artefacts or problems, familiarizes students with working life environments and aims to teach skills required in the professional world. We target one of the major limitation factors for optimal trialogical learning in university settings, inefficient group work. We propose a course design combining effective group working practices with trialogical learning principles in life sciences. We assess the usability of our design in (a) a case study on crop science education and (b) a questionnaire for university teachers in life science fields. Our approach was considered useful and supportive of the learning process by all the participants in the case study: the students, the stakeholders and the facilitator. Correspondingly, a group of university teachers expressed that the trialogical approach and the involvement of stakeholders could promote efficient learning. In our case in life sciences, we identified the key issues in facilitating effective group work to be the design of meaningful tasks and the allowance of sufficient time to take action based on formative feedback. Even though trialogical courses can be time consuming, the experience of applying knowledge in real-life cases justifies using the approach, particularly for students just about to enter their professional careers.

  9. WWW-based environments for collaborative group work

    NARCIS (Netherlands)

    Collis, Betty

    1998-01-01

    Since 1994, we have been involved in the design and use of a series of WWW-based environments to support collaborative group work for students in a technical university in The Netherlands. These environments, and the course re-design that accompanies each new environment, began in April 1994 and

  10. Final detailed report of the work group number 3

    International Nuclear Information System (INIS)

    1999-01-01

    The objective of this work group was to propose the tools the most adapted for the evaluation of radionuclides concentration of the north Cotentin in environment, on searching to validate the model of transfer of radionuclides released by industries by comparing them to the measures realised by the different stakeholders. (N.C.)

  11. International Work Group Criteria for the Diagnosis of Alzheimer Disease

    NARCIS (Netherlands)

    Cummings, J.L.; Dubois, B; Molinuevo, J.L.; Scheltens, P.

    2013-01-01

    Alzheimer-type biomarker changes are identifiable in asymptomatic and mildly symptomatic predementia phases of Alzheimer disease (AD) and AD dementia. The International Work Group (IWG) guidelines for diagnosis identify a unified spectrum of 3 phases. The classic clinical feature that indicates AD

  12. International Consultation and Training on Group Work in South Asia

    Science.gov (United States)

    Ibrahim, Farah A.

    2015-01-01

    This article presents a consultation and training for faculty and graduate students in South Asia under the auspices of the United Nations' Transfer of Knowledge Through Expatriate Nationals (TOKTEN) Program. It describes the development of a consultation relationship and training on group work. Needs assessments focusing on both cultural…

  13. Big Data: Laying the Groundwork. ECAR Working Group Paper

    Science.gov (United States)

    Almes, Guy T.; Hillegas, Curtis W.; Lance, Timothy; Lynch, Clifford A.; Monaco, Gregory E.; Mundrane, Michael R.; Zottola, Ralph J.

    2014-01-01

    This paper is part of series of the EDUCAUSE Center for Analysis and Research Campus Cyberinfrastructure (ECAR-CCI) Working Group. The topic of big data continues to receive a great deal of publicity because of its promise for opening new avenues of scholarly discovery and commercial opportunity. The ability to sift rapidly through massive amounts…

  14. Small arms proliferation. Report on working group 2

    International Nuclear Information System (INIS)

    1998-01-01

    The working group reported on the proliferation of small arms, light weapons non-lethal weapons, which have traditionally been given little attention in international talks on peace on the contrary to nuclear weapons which have been tested during the Second World War but never used in war later

  15. Automated Image Analysis Corrosion Working Group Update: February 1, 2018

    Energy Technology Data Exchange (ETDEWEB)

    Wendelberger, James G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    These are slides for the automated image analysis corrosion working group update. The overall goals were: automate the detection and quantification of features in images (faster, more accurate), how to do this (obtain data, analyze data), focus on Laser Scanning Confocal Microscope (LCM) data (laser intensity, laser height/depth, optical RGB, optical plus laser RGB).

  16. Working group report: Low energy and flavour physics

    Indian Academy of Sciences (India)

    This is a report of the low energy and flavour physics working group at ... that calculates the non-leptonic decay amplitudes including the long-distance con- tributions. There were three lectures that lasted for over seven hours, and were.

  17. CEBAF/SURA 1985 Summer Workshop

    International Nuclear Information System (INIS)

    Crannel, H.

    1985-12-01

    The 1985 Summer Workshop began a new phase of planning for the experimental program at CEBAF. One goal of the Workshop was to define and describe options for equipping the CEBAF and stations with experimental equipment. Starting with an initial list of options which grew out of discussions during the Winter of 1984 and the Spring of 1985, the five working groups met during the Workshop and developed their final reports, included in these proceedings. The program of the Workshop consisted of invited talks on both theoretical and experimental topics, and working group meetings. The five working groups, include: Magnetic Spectrometers; Large Acceptance Detectors and Low Intensity Beams; Internal Targets; Positrons; Theory. These proceedings begin with an overview of CEBAF, and a report on progress made by the Magnetic Spectrometer and Internal Target Working Groups prior to the Workshop. The next part contains the invited talks, presented in the order which they were given during the week. The final reports of the five working groups follow this, and the proceedings conclude with papers contributed to the Workshop

  18. GGOS working group on ground networks and communications

    Science.gov (United States)

    Pearlman, M.; Altamimi, Z.; Beck, N.; Forsberg, R.; Gurtner, W.; Kenyon, S.; Behrend, D.; Lemoine, F. G.; Ma, C.; Noll, C. E.; hide

    2005-01-01

    Activities of this Working Group include the investigation of the status quo and the development of a plan for full network integration to support improvements in terrestrial reference frame establishment and maintenance, Earth orientation and gravity field monitoring, precision orbit determination, and other geodetic and gravimetric applications required for the long-term observation of global change. This integration process includes the development of a network of fundamental stations with as many co-located techniques as possible, with precisely determined intersystem vectors. This network would exploit the strengths of each technique and minimize the weaknesses where possible. This paper discusses the organization of the working group, the work done to date, and future tasks.

  19. Development Strategy of Microtakaful Institutions: Case Study Working Group Indonesia

    Directory of Open Access Journals (Sweden)

    Aam Slamet Rusydiana

    2017-07-01

    Full Text Available Indonesia is becoming one of potential countries in microtakaful institutions development. One of the expert in microtakaful is Takmin Working Group. TWG is a group of initiators who have commitment to develop micro takaful in Indonesia. Its members consist ofexperts in Islamic insurance, micro finance and accounting. The research objectives of this study are to identify and analyze the problems faced by TWG in developing of microtakaful institutions and identify the solutions to solve those kinds of problems, by using AnalticHierarchy Process (AHP method. The finding of this study shows the most priority solutions that can be undertake by Takmin Working Group to solve these both internal and external problem is information system development, and then followed by innovative product development. Communication & visitation to Islamic micro finance institutions and socialization about micro takaful product to society are being less priority on this matter.DOI: 10.15408/etk.v16i2.5267

  20. Workshop on Accelerators for Heavy Ion Fusion: Summary Report of the Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Seidl, P.A.; Barnard, J.J.

    2011-04-29

    The Workshop on Accelerators for Heavy Ion Fusion was held at Lawrence Berkeley National Laboratory May 23-26, 2011. The workshop began with plenary sessions to review the state of the art in HIF (heavy ion fusion), followed by parallel working groups, and concluded with a plenary session to review the results. There were five working groups: IFE (inertial fusion energy) targets, RF approach to HIF, induction accelerator approach to HIF, chamber and driver interface, ion sources and injectors.

  1. The TF1 Radio Astronomy Working Group in the Andean ROAD: goals and challenges for 2025

    Science.gov (United States)

    Chaparro Molano, G.

    2017-07-01

    Since the creation of the Andean Regional Office of Astronomy for Development (OAD) of the International Astronomical Union, one of the main goals has been to foster a scientific culture of radio astronomy in countries of the central and northern Andes (Bolivia, Colombia, Ecuador, Perú, and Venezuela). For this reason, Andean ROAD Task Force 1 (Research and Education in Universities) created the Radio Astronomy Working Group to set a path along which collaborative endeavors can grow and yield scientific results. The first official meeting of the Working Group took place in Bogotá, Colombia during the 2nd Astronomá en los Andes Workshop (2015) where scientists actively developing projects in radio astronomy set goals for the near future, such as improving mobility for researchers and students, developing collaborations in related areas such as engineering and data science, and building transnational collaborations aiming at developing VLBI across the countries of the Andean ROAD and beyond. In this poster, I present current projects and associated research groups (ROAS - Perú, SiAMo - Colombia, Alfa-Orion UTP - Colombia, RAIG - Chile) and discuss goalposts and current challenges in the development of transnational radioastronomical projects. As a case study, I present the development and early astronomical results of the privately funded UECCI 4m Radio Telescope for 21 cm line observations in Bogotá, Colombia.

  2. Working group report on the structure of the proton

    International Nuclear Information System (INIS)

    Badelek, B.; Vogt, A.; Gehrmann, T.; Martin, A.D.; Lancaster, M.

    1996-03-01

    We summarize the developments on the structure of the proton that we studied at the Workshop on HERA physics that was held in Durham in September 1995. We survey the latest structure function data; we overview the QCD interpretations of the measurements of the structure functions and of final state processes; we discuss charm production and the spin properties of the proton. (orig.)

  3. The use of group work and journal writing in reinventing ...

    African Journals Online (AJOL)

    ... a multidisciplinary Masters programme in Planning, Management and Practice of ... Most concepts (participation, sustainability, planning, development, and so ... In addition to formal lectures and discussion classes, writing skill workshops to ... need for more structure and guidance to steer individual learning processes.

  4. 'AER Working Group D On WWER Safety Analysis' Report Of The Meeting In Pisa, Italy, 26-27 April 2006

    International Nuclear Information System (INIS)

    Siltanen, P.

    2006-01-01

    AER Working Group D on WWER reactor safety analysis held its 15 t h meeting in Grand Hotel Duomo in Pisa, Italy during the period 26-27 April 2006. The meeting was hosted by the University of Pisa following the fourth workshop on the OECD/DOE/CEA WWER-1000 Coolant Transient Benchmark (W1000-CT) held at the same location on 24-25 April. Altogether 15 participants attended the Working Group D meeting, 11 from AER member organizations and 4 guests from non-member organizations. The coordinator for the working group, Mr. P. Siltanen (FNS) served as chairman. In addition to general information exchange on recent activities in the participating organizations, the topics of the meeting included: 1) Code development and benchmarking for reactor dynamics applications. 2) Safety analysis methodology and results. 3) Future activities. A list of participants and a list of handouts distributed at the meeting are attached to the report (Author)

  5. International workshop on WWER-440 reactor pressure vessel embrittlement and annealing. Working material

    International Nuclear Information System (INIS)

    1994-01-01

    The purpose of the Workshop was essentially to discuss the WWER 440 model 230 reactor pressure vessel integrity in terms of the measures already taken, current activities and future plans. The meeting was arranged in two parts, namely, the Scientific programme followed by the consideration, review and revision of the IAEA Consultancy report on RPV Embrittlement and Annealing. This particular report covers the first part of the meeting i.e., the Scientific Programme, in the form of proceedings of the meeting, while the re-drafted Consultancy report will be issued later. The meeting was attended by sixty-six representatives from thirteen countries. Refs, figs and tabs

  6. The dynamics of access to groups in working memory.

    Science.gov (United States)

    Farrell, Simon; Lelièvre, Anna

    2012-11-01

    The finding that participants leave a pause between groups when attempting serial recall of temporally grouped lists has been taken to indicate access to a hierarchical representation of the list in working memory. An alternative explanation is that the dynamics of serial recall solely reflect output (rather than memorial) processes, with the temporal pattern at input merely suggesting a basis for the pattern of output buffering. Three experiments are presented here that disentangle input structure from output buffering in serial recall. In Experiment 1, participants were asked to recall a subset of visually presented digits from a temporally grouped list in their original order, where either within-group position or group position was kept constant. In Experiment 2, participants performed more standard serial recall of spoken digits, and input and output position were dissociated by asking participants to initiate recall from a post-cued position in the list. In Experiment 3, participants were asked to serially recall temporally grouped lists of visually presented digits where the grouping structure was unpredictable, under either articulatory suppression or silent conditions. The 3 experiments point to a tight linkage between implied memorial structures (i.e., the pattern of grouping at encoding) and the output structure implied by retrieval times and call into question a purely motoric account of the dynamics of recall.

  7. Response to the Report of the Transfermium Working Group

    International Nuclear Information System (INIS)

    Armbruster, P.; Hessberger, F.P.; Hofmann, S.; Leino, M.; Muenzenberg, G.; Reisdorf, W.; Schmidt, K.-H.

    1993-01-01

    The research group at the Gesellschaft fuer Schwerionenforschung highly appreciates the efforts of the International Union of Applied Chemistry and the International Union of Applied Physics to solve the longstanding problem of the priority of discovery of the heaviest elements by appointing the Transfermium Working Group. This international group of renowned experts in nuclear physics and chemistry, headed by Sir Denys Wilkinson, established criteria for the discovery of a new element and on the basis judged on the priorities of the discoveries of the transfermium elements. Members of this group were scientists from countries not involved in the discovery of a new element. The criteria for the discovery of new elements were developed after a careful study of the literature and after visits to the involved laboratories. Permanent contact was established with the researchers concerned by distributing the protocols of the TWG meetings. Only this procedure made it possible that the criteria were adapted to the most recent experimental developments. (Author)

  8. Seismic design assessment by experimental methods. Notes from the workshop. Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees.

  9. Seismic design assessment by experimental methods. Notes from the workshop. Working material

    International Nuclear Information System (INIS)

    2001-01-01

    The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees

  10. Interim report of working group of Nuclear Fusion Committee

    International Nuclear Information System (INIS)

    Takuma, Hiroshi

    1986-01-01

    The conclusion of the working group was presented as an interim report to the general meeting of Nuclear Fusion Committee, which became the base for deciding the future plan. The report was the result of the hard work for about a half year by five Committee experts and 23 researchers, and has the rich contents. At present, the supply of petroleum relaxed, and the trend that a large amount of investment for a long period for nuclear fusion research is problematical has become strong. Of course, the importance of the nuclear fusion research never changes. The research projects of Heliotron E, Gekko 12, Gamma 10 and so on have advanced, and the base for synthetically promoting the research has been completed. It is indispensable to decide the most effective plan for the next stage. The working group discussed on the five year plan, especially on the research based on a large project. The policy of the works and problems, the progress of the works of respective subgroups, and the summarization are reported. The researches on nuclear burning simulation, no current plasma using an external conductor system and making an axisymmetrical high-beta torus steady were proposed. (Kako, I.)

  11. The PDF4LHC Working Group Interim Report

    CERN Document Server

    Alekhin, Sergey; Ball, Richard D.; Bertone, Valerio; Blumlein, Johannes; Botje, Michiel; Butterworth, Jon; Cerutti, Francesco; Cooper-Sarkar, Amanda; de Roeck, Albert; Del Debbio, Luigi; Feltesse, Joel; Forte, Stefano; Glazov, Alexander; Guffanti, Alberto; Gwenlan, Claire; Huston, Joey; Jimenez-Delgado, Pedro; Lai, Hung-Liang; Latorre, Jose I.; McNulty, Ronan; Nadolsky, Pavel; Olaf Moch, Sven; Pumplin, Jon; Radescu, Voica; Rojo, Juan; Sjostrand, Torbjorn; Stirling, W.J.; Stump, Daniel; Thorne, Robert S.; Ubiali, Maria; Vicini, Alessandro; Watt, Graeme; Yuan, C.-P.

    2011-01-01

    This document is intended as a study of benchmark cross sections at the LHC (at 7 TeV) at NLO using modern parton distribution functions currently available from the 6 PDF fitting groups that have participated in this exercise. It also contains a succinct user guide to the computation of PDFs, uncertainties and correlations using available PDF sets. A companion note, also submitted to the archive, provides an interim summary of the current recommendations of the PDF4LHC working group for the use of parton distribution functions and of PDF uncertainties at the LHC, for cross section and cross section uncertainty calculations.

  12. PROLIFERATION RESISTANCE AND PHYSICAL PROTECTION WORKING GROUP: METHODOLOGY AND APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Bari R. A.; Whitlock, J.; Therios, I.U.; Peterson, P.F.

    2012-11-14

    We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.

  13. Proliferation resistance and physical protection working group: methodology and applications

    International Nuclear Information System (INIS)

    Bari, Robert A.; Whitlock, Jeremy J.; Therios, Ike U.; Peterson, P.F.

    2012-01-01

    We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.

  14. Perceived discontinuities and continuities in transdisciplinary scientific working groups.

    Science.gov (United States)

    Crowston, Kevin; Specht, Alison; Hoover, Carol; Chudoba, Katherine M; Watson-Manheim, Mary Beth

    2015-11-15

    We examine the DataONE (Data Observation Network for Earth) project, a transdisciplinary organization tasked with creating a cyberinfrastructure platform to ensure preservation of and access to environmental science and biological science data. Its objective was a difficult one to achieve, requiring innovative solutions. The DataONE project used a working group structure to organize its members. We use organizational discontinuity theory as our lens to understand the factors associated with success in such projects. Based on quantitative and qualitative data collected from DataONE members, we offer recommendations for the use of working groups in transdisciplinary synthesis. Recommendations include welcome diverse opinions and world views, establish shared communication practices, schedule periodic synchronous face-to-face meetings, and ensure the active participation of bridge builders or knowledge brokers such as librarians who know how to ask questions about disciplines not their own. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Summary report: working group 2 on 'Plasma Based Acceleration Concepts'

    International Nuclear Information System (INIS)

    Esarey, E.; Leemans, W.P.

    1998-01-01

    A summary of the talks, papers and discussion sessions presented in the Working Group on Plasma Based Acceleration Concepts is given within the context of the progress towards a 1 GeV laser driven accelerator module. The topics covered within the Working Group were self-modulated laser wakefield acceleration, standard laser wakefield acceleration, plasma beat wave acceleration, laser guiding and wake excitation in plasma channels, plasma wakefield acceleration, plasma lenses and optical injection techniques for laser wakefield accelerators. An overview will be given of the present status of experimental and theoretical progress as well as an outlook towards the future physics and technological challenges for the development of an optimized accelerator module

  16. Executive committee report: geotechnical instrumentation working group meeting

    International Nuclear Information System (INIS)

    Wilder, D.G.; Rogue, F.; Beloff, W.R.; Binnall, E.; Gregory, E.C.

    1982-01-01

    Responding to the widespread need for the geotechnical community to discuss instrumentation for nuclear waste repositories, a meeting was held December 2 and 3, 1981, in Denver, Colorado. This report gives the group's consensus recommendations to aid in making decisions for development of instrumentation for future repository work. The main conclusions of the working group meeting were as follows: (1) monitoring of geotechnical parameters in nuclear waste repositories will be necessary to meet licensing requirements; (2) currently available instruments are underdeveloped for this monitoring; (3) research and development to provide adequate instrumentation will need to be performed under federal sponsorship by national laboratories, universities, contractors, and consultants; and (4) a NASA-type reliability program is needed to meet the quality assurance, durability, calibration, and time schedule demands of geotechnical instrumentation development. This will require significant financial commitments from the federal sector

  17. Working Group on Ionising Radiations. Report 1987-88

    International Nuclear Information System (INIS)

    1989-01-01

    The programme of work for 1987/88 by the Working Group on Ionising Radiation, Health and Safety Commision in February 1988, included the main topics of continuing interest and concern in relation to ionising radiations in general and the Ionising Radiations Regulations 1985 (IRR 85) (Ref 1) in particular. These were: emergency dose limitation, occupational dose limitation, practical experience of the principle of keeping doses as low as reasonably practicable, experience of the regulatory requirements in respect of internal dosimetry and the need for a standing advisory committee on ionising radiations. Calibration of radiotherapy equipment was also considered as a matter of principle following a specific incident involving cancer patients. This report of progress during the first year summarises the Group's opinions on each topic and gives recommendations. (author)

  18. E-Beam Driven Accelerators: Working Group Summary

    International Nuclear Information System (INIS)

    Muggli, P.; Southern California U.; Ng, J.S.T.; SLAC

    2005-01-01

    The working group has identified the parameters of an afterburner based on the design of a future linear collider. The new design brings the center of mass energy of the collider from 1 to 2 TeV. The afterburner is located in the final focus section of the collider, operates at a gradient of ∼4 GeV/m, and is only about 125 m long. Very important issues remain to be addressed, and include the physics and design of the positron side of the afterburner, as well as of the final focus system. Present plasma wakefield accelerator experiments have reached a level of maturity and of relevance to the afterburner, that make it timely to involve the high energy physics and accelerator community in the afterburner design process. The main result of this working group is the first integration of the designs of a future linear collider and an afterburner

  19. Overview of the EMRAS biota dosimetry working group

    International Nuclear Information System (INIS)

    Kawaguchi, Isao; Doi, Masahiro

    2008-01-01

    Current principle of radiation protection systems is protection of human, because the human is assumed as the most sensitive organism. Protection framework of human is also believed to be effective for protection of non-human species. On the other hand, it is recently attracting the international interests how sustainability of the ecological services is influenced by environmental disturbances such as chemicals and radiation. Therefore, international concern about protection framework of nonhuman biota has arisen. By the international concern, European and American countries were respectively developed models to evaluate effects of radiation to biota. However, the models are based on their own assumptions, so that the international validity has not been confirmed. Therefore, in IAEA, biota dosimetry working group (BWG) was established in Environmental Modeling for Radiation Safety (EMRAS) program, which aimed to intercompare the models to validate their assumptions and estimations. This paper reports summary of the activity in EMRAS biota dosimetry working group. (author)

  20. The GRIP method for collaborative roadmapping workshops

    DEFF Research Database (Denmark)

    Piirainen, Kalle

    2015-01-01

    Technology roadmapping is a well-known tool for technology management, but practical advice for facilitating collaborative roadmapping workshops is relatively scarce. To cater for this need, we have designed a method for collaborative roadmapping, dubbed the GRIP method, for facilitating group work...... in TRM workshops. The design is based on establish best practices in facilitation and our experiences with the method suggest it is a feasible tool for technology managers. The benefits of the method are that it enables engaging a diverse group of individuals to the roadmapping process effectively even...... during a short workshop session and facilitates shared understanding on the technology management issues....

  1. Managing a work-life balance: the experiences of midwives working in a group practice setting.

    Science.gov (United States)

    Fereday, Jennifer; Oster, Candice

    2010-06-01

    To explore how a group of midwives achieved a work-life balance working within a caseload model of care with flexible work hours and on-call work. in-depth interviews were conducted and the data were analysed using a data-driven thematic analysis technique. Children, Youth and Women's Health Service (CYWHS) (previously Women's and Children's Hospital), Adelaide, where a midwifery service known as Midwifery Group Practice (MGP) offers a caseload model of care to women within a midwife-managed unit. 17 midwives who were currently working, or had previously worked, in MGP. analysis of the midwives' individual experiences provided insight into how midwives managed the flexible hours and on-call work to achieve a sustainable work-life balance within a caseload model of care. it is important for midwives working in MGP to actively manage the flexibility of their role with time on call. Organisational, team and individual structure influenced how flexibility of hours was managed; however, a period of adjustment was required to achieve this balance. the study findings offer a description of effective, sustainable strategies to manage flexible hours and on-call work that may assist other midwives working in a similar role or considering this type of work setting. Copyright 2008 Elsevier Ltd. All rights reserved.

  2. Report of the Quark Flavor Physics Working Group

    CERN Document Server

    Butler, J N; Ritchie, J L; Cirigliano, V; Kettell, S; Briere, R; Petrov, A A; Schwartz, A; Skwarnicki, T; Zupan, J; Christ, N; Sharpe, S R; Van de Water, R S; Altmannshofer, W; Arkani-Hamed, N; Artuso, M; Asner, D M; Bernard, C; Bevan, A J; Blanke, M; Bonvicini, G; Browder, T E; Bryman, D A; Campana, P; Cenci, R; Cline, D; Comfort, J; Cronin-Hennessy, D; Datta, A; Dobbs, S; Duraisamy, M; El-Khadra, A X; Fast, J E; Forty, R; Flood, K T; Gershon, T; Grossman, Y; Hamilton, B; Hill, C T; Hill, R J; Hitlin, D G; Jaffe, D E; Jawahery, A; Jessop, C P; Kagan, A L; Kaplan, D M; Kohl, M; Krizan, P; Kronfeld, A S; Lee, K; Littenberg, L S; MacFarlane, D B; Mackenzie, P B; Meadows, B T; Olsen, J; Papucci, M; Parsa, Z; Paz, G; Perez, G; Piilonen, L E; Pitts, K; Purohit, M V; Quinn, B; Ratcliff, B N; Roberts, D A; Rosner, J L; Rubin, P; Seeman, J; Seth, K K; Schmidt, B; Schopper, A; Sokoloff, M D; Soni, A; Stenson, K; Stone, S; Sundrum, R; Tschirhart, R; Vainshtein, A; Wah, Y W; Wilkinson, G; Wise, M B; Worcester, E; Xu, J; Yamanaka, T

    2013-01-01

    This report represents the response of the Intensity Frontier Quark Flavor Physics Working Group to the Snowmass charge. We summarize the current status of quark flavor physics and identify many exciting future opportunities for studying the properties of strange, charm, and bottom quarks. The ability of these studies to reveal the effects of new physics at high mass scales make them an essential ingredient in a well-balanced experimental particle physics program.

  3. Using collaborative work groups to reduce O ampersand M costs

    International Nuclear Information System (INIS)

    Francoeur, R.; Jones, J.N.

    1995-01-01

    Commonwealth Edison Company (ComEd) entered the nineties burdened with external distractions from its core business of power generation. Its unresolved 1987 rate case continued to face intervention in the courts. Some of its largest industrial and municipal customers were exploring more economical alternatives. The new convention facility in Chicago actually engaged an independent energy supplier. Retail wheeling was the hot topic, and internal problems were present. Operations and Maintenance (O ampersand M) costs were steadily increasing. Two of their six nuclear stations were on the Nuclear Regulatory Commission's Watch List. Immediate changes had to occur if ComEd was to ensure its future competitiveness. At ComEd Braidwood Nuclear Power Station some untraditional work methodologies were embarked upon to help the parent company reduce its O ampersand M costs. Various types of collaborative work groups were formed, and have succeeded in lowering O ampersand M costs through shorter refueling outages and the use of fewer contracted personnel. These collaborative work groups are listed below and are described in detail in the remainder of this paper: (1) A core group of Maintenance Modification Contractor (MMC) supervision integrated into the Owner's Maintenance Staff, (2) A Corporate Outage Support Group of supervisory personnel which supplements the site's Maintenance Staff, (3) The Integrated Outage and Turbine Overhaul Contractor using a mixture of its own and Maintenance Staff supervisory personnel during outages with the Owner supplementing craft support using a third-party, (4) Six nuclear stations sharing key MMC personnel to insure experienced individuals are used effectively, and (5) Composite teams of maintenance personnel working across defined disciplines Braidwood Station has capitalized on the strategy of positive collaboration to become one of the lowest cost producers of nuclear power. Its use has enabled the Station to successfully complete the

  4. The Exclusive Group - Expatriates Working against Corporate Goals

    DEFF Research Database (Denmark)

    Lauring, Jakob

    2004-01-01

    Theories on expatriation have proposed international transfer as a mean to develop management capabilities and internationalise organisational communication networks. It has been argued that such developments are highly dependent on a sustained continual cross-cultural communication between...... as destructive towards overall corporate aims to internationalise and develop managerial and organisational competencies. Specifically excluding behaviour and cultural boundary creation of the expatriate group hindered the necessary cross-cultural communication and thereby working against corporate strategy...... of development....

  5. Food Parenting Measurement Issues: Working Group Consensus Report

    OpenAIRE

    Hughes, Sheryl O.; Frankel, Leslie A.; Beltran, Alicia; Hodges, Eric; Hoerr, Sharon; Lumeng, Julie; Tovar, Alison; Kremers, Stef

    2013-01-01

    Childhood obesity is a growing problem. As more researchers become involved in the study of parenting influences on childhood obesity, there appears to be a lack of agreement regarding the most important parenting constructs of interest, definitions of those constructs, and measurement of those constructs in a consistent manner across studies. This article aims to summarize findings from a working group that convened specifically to discuss measurement issues related to parental influences on...

  6. Report of working group for technical standard of cutting and melting works in Glovebox dismantling

    International Nuclear Information System (INIS)

    Asazuma, Shinichiroh; Takeda, Shinsoh; Tajima, Shoichi

    2004-11-01

    In order to prevent spread of contamination, glovebox dismantling activity is usually performed in a confined enclosure with personal radioactive protective equipment. Since large potion of these materials is made of vinyl acetate, there exist potential risks of fire, damage and injury to the environment and workers during the dismantling (cutting or melting) operation. It is therefore important to establish standard for proper use of equipment and hazard controls in such a specific environment. Working Group composed of Tokai Works and Oarai Works has examined and developed the operational standard for cutting work in glovebox dismantlement. The result is reflected to the Tokai Works Safety Operational Standard. (author)

  7. The life of relationship in globalized financial economic devices: Evidences from the experience of a group-analytic transcultural workshop

    Directory of Open Access Journals (Sweden)

    Valentina Lo Mauro

    2014-09-01

    Full Text Available The present contribution - starting from the experience of the EATGA Workshop 2011 that took place in Palermo and that had as its theme “Intersubjective bonds in the globalized economy” - invites to reflect on the quality of the life of relationship and intersubjective connectedness in social contemporary world. One of the characterizing cultural phenomena influencing contemporary reality is made up by the dominant and pervasive presence of logic and language of financial markets in policies and activities that organize and articulate daily life. Theoretical hypothesis driving our research is that the structures of subjectivity, the meaning and the way of being in a relationship are characteristics (cultural themes that emerge within a defined cultural and historical system. In such a theoretical perspective, cultural themes are incorporated or interiorized by men belonging a shared cultural system and so became elements of the shared subjectivity and of the meanings given to intersubjective exchanges and bonds. From the workshop experience some meanings emerge concerning the role of economical-financial system in promoting codes and symbols that define the shape and the sense of relationship. The cultural codes of the market have gone out from the economic circle in which they were born and they are offered as organizers of affections and relationships. This is an evidence for the critical actual historical moment, in which the values and the cultural codes organized on the trust, on the reciprocity, on the common share and participation seems to be interdicted.Keywords: Transcultural Group-Analysis, Intersubjective Relationship, Cultural Models of the Exchange

  8. Summary of the Optics, IR, Injection, Operations, Reliability and Instrumentation Working Group

    International Nuclear Information System (INIS)

    Wienands, U.

    2012-01-01

    The facilities reported on are all in a fairly mature state of operation, as evidenced by the very detailed studies and correction schemes that all groups are working on. First- and higher-order aberrations are diagnosed and planned to be corrected. Very detailed beam measurements are done to get a global picture of the beam dynamics. More than other facilities the high-luminosity colliders are struggling with experimental background issues, mitigation of which is a permanent challenge. The working group dealt with a very wide rage of practical issues which limit performance of the machines and compared their techniques of operations and their performance. We anticipate this to be a first attempt. In a future workshop in this series, we propose to attempt more fundamental comparisons of each machine, including design parameters. For example, DAPHNE and KEKB employ a finite crossing angle. The minimum value of β* y attainable at KEKB seems to relate to this scheme. Effectiveness of compensation solenoids and turn-by-turn BPMs etc. should be examined in more detail. In the near future, CESR-C and VEPP-2000 will start their operation. We expect to hear important new experiences from these machines; in particular VEPP-2000 will be the first machine to have adopted round beams. At SLAC and KEK, next generation B Factories are being considered. It will be worthwhile to discuss the design issues of these machines based on the experiences of the existing factory machines.

  9. Working Group VI Summary Report: New Ideas Employing High-Power Lasers

    International Nuclear Information System (INIS)

    Leemans, W.P.

    1999-01-01

    The objectives of this working group were to provide the ''Future Light Source Community'' information on: Electron-Laser interaction based sources; Plasma based radiation sources and accelerators; and Present and future high-power laser technology. A summary of presentations, discussions and opinions is presented next. At the end of this report, a few references are given. The list is very far from being complete but is meant as a start for further exploring the various topics discussed in this working group. Based on presentations and discussions during the workshop, a summarizing table of the performance of three different types of laser systems has been made. The emphasis is on listing performance parameters of solid state, FEL and gas based lasers, relevant to the development of a future fourth generation light source. Two types of solid state lasers capable of producing peak power in the multi-terawatt range are described: Nd:glass and Ti:sapphire lasers [1]. The main development for these lasers is towards higher average power levels: from the 10 W to the > 100 W level. An infrared FEL has recently produced 1 kW average power but with peak power on the order of 0.1 GW [2]. A terawatt class, short pulse CO 2 based gas laser is under development at the Advanced Test Facility at BNL [3

  10. Virtual Workshop

    DEFF Research Database (Denmark)

    Buus, Lillian; Bygholm, Ann

    In relation to the Tutor course in the Mediterranean Virtual University (MVU) project, a virtual workshop “Getting experiences with different synchronous communication media, collaboration, and group work” was held with all partner institutions in January 2006. More than 25 key-tutors within MVU...

  11. BUGS at work : a bicycle user group guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This guide provides practical advice to cyclists on how start a Bicycle User Group (BUG) at their workplace. It offers tools to encourage employers to be proactive in improving facilities in support of cycle commuting. Several BUGs across Canada have worked towards getting better bicycle parking, lockers and shower facilities at their workplace. Other incentives include policies such as flexible work hours for cyclist commuters; casual dress on Friday; reimbursement for the subsidized cost of free parking provided by employers; and, use of a company car if needed for company business during the work day. The advantages to employers include: reduced health care costs because cyclists are physically fit; decreased absenteeism; increased productivity; reduced parking costs; lower company transportation bills; and, a greener corporate image. BUGs provide cycling information ranging from cycling maps to pamphlets and they raise cycle awareness. This guide includes cycling survey samples and examples of successful BUG activities across Canada. refs., tabs., figs.

  12. Working group report: methane emissions from biomass burning

    International Nuclear Information System (INIS)

    Delmas, R.A.; Ahuja, D.

    1993-01-01

    Biomass burning is a significant source of atmospheric methane. Like most other sources of methane, it has both natural and anthropogenic causes, although anthropogenic causes now predominate. Most of the estimates of methane emissions from biomass burning in the past have relied on a uniform emission factor for all types of burning. This results in the share of trace gas emissions for different types of burning being the same as the amounts of biomass burned in those types. The Working Group endorsed the extension of an approach followed for Africa by Delmas et al. (1991) to use different emission factors for different types of biomass burning to estimate national emissions of methane. This is really critical as emission factors present important variations. While the focus of discussions of the Working Group was on methane emissions from biomass burning, the Group endorsed the IPCC-OECD methodology of estimating all greenhouse related trace gases from biomass burning. Neither the IPCC-OECD nor the methodology suggested here applies to estimation of trace gas emissions from the processing of biomass to upgraded fuels. They must be estimated separately. The Group also discussed technical options for controlling methane emissions from biomass. 12 refs

  13. Improving tsunami resiliency: California's Tsunami Policy Working Group

    Science.gov (United States)

    Real, Charles R.; Johnson, Laurie; Jones, Lucile M.; Ross, Stephanie L.; Kontar, Y.A.; Santiago-Fandiño, V.; Takahashi, T.

    2014-01-01

    California has established a Tsunami Policy Working Group to facilitate development of policy recommendations for tsunami hazard mitigation. The Tsunami Policy Working Group brings together government and industry specialists from diverse fields including tsunami, seismic, and flood hazards, local and regional planning, structural engineering, natural hazard policy, and coastal engineering. The group is acting on findings from two parallel efforts: The USGS SAFRR Tsunami Scenario project, a comprehensive impact analysis of a large credible tsunami originating from an M 9.1 earthquake in the Aleutian Islands Subduction Zone striking California’s coastline, and the State’s Tsunami Preparedness and Hazard Mitigation Program. The unique dual-track approach provides a comprehensive assessment of vulnerability and risk within which the policy group can identify gaps and issues in current tsunami hazard mitigation and risk reduction, make recommendations that will help eliminate these impediments, and provide advice that will assist development and implementation of effective tsunami hazard risk communication products to improve community resiliency.

  14. Danish Report: Work Stream 3: Fokus Group Interviews

    DEFF Research Database (Denmark)

    Siim, Birte; Larsen, Jeppe Fuglsang; Meret, Susi

    2014-01-01

    on – not only at the national level but especially beyond and below the nation state – at the transnational and local levels. It shows that some of the groups, for example Sabaah, offering counselling to homosexual youths with a Muslim background, work mainly on the local municipality level in Copenhagen. Other...... initiatives to combat hate speech hate crimes. The mapping of voluntary movements/groups/organizations presents an overview of the diverse policies and strategies towards racism, discrimination and hates speech and hate behavior. It looks at the kind of activities, campaigns and demonstrations...... the organizations have been engaged in demonstrating the close collaborations and negotiations/networking between the democratic anti-bodies as well as the struggles between antibodies and groups practicing hate speech and hate behavior. This identified important gaps in our knowledge about what is going...

  15. Summary of the particle physics and technology working group

    International Nuclear Information System (INIS)

    Stephan Lammel et al. email = crathbun@fnal.gov

    2002-01-01

    Progress in particle physics has been tightly related to technological advances during the past half century. Progress in technologies has been driven in many cases by the needs of particle physics. Often, these advances have benefited fields beyond particle physics: other scientific fields, medicine, industrial development, and even found commercial applications. The particle physics and technology working group of Snowmass 2001 reviewed leading-edge technologies recently developed or in the need of development for particle physics. The group has identified key areas where technological advances are vital for progress in the field, areas of opportunities where particle physics may play a principle role in fostering progress, and areas where advances in other fields may directly benefit particle physics. The group has also surveyed the technologies specifically developed or enhanced by research in particle physics that benefit other fields and/or society at large

  16. Network workshop

    DEFF Research Database (Denmark)

    Bruun, Jesper; Evans, Robert Harry

    2014-01-01

    This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

  17. Working with Diverse Groups of Learners in the Digital Age

    OpenAIRE

    Hughes, Julie; Kidd, Warren

    2011-01-01

    This publication and its wider project draw upon several years of ESCalate activity focussing upon the development of learning and teaching in relation to the use of technology. ESCalate is the UK Higher Education Academy (HEA)‟s Subject Centre for Education programmes in Higher Education (HE). Practitioner-focussed workshops, held over the past 3 years, have proved successful in the dissemination of the innovative use of emergent technologies and pedagogies in education subjects. Increasingl...

  18. New Physics at the LHC: A Les Houches Report. Physics at Tev Colliders 2007 - New Physics Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Brooijmans, Gustaaf H.; /Columbia U.; Delgado, A.; /Notre Dame U.; Dobrescu, Bogdan A.; /Fermilab; Grojean, C.; /CERN /Saclay, SPhT; Narain, Meenakshi; /Brown U.; Alwall, Johan; /SLAC; Azuelos, Georges; /Montreal U. /TRIUMF; Black, K.; /Harvard U.; Boos, E.; /SINP, Moscow; Bose, Tulika; /Brown U.; Bunichev, V.; /SINP, Moscow; Chivukula, R.S.; /Michigan State U.; Contino, R.; /CERN; Djouadi, A.; /Louis Pasteur U., Strasbourg I /Orsay, LAL; Dudko, Lev V.; /Durham U.; Ferland, J.; /Montreal U.; Gershtein, Yuri S.; /Florida State U.; Gigg, M.; /Durham U.; Gonzalez de la Hoz, S.; /Valencia U., IFIC; Herquet, M.; /Louvain U.; Hirn, J.; /Yale U. /Brown U. /Boston U. /Annecy, LAPTH /INFN, Turin /Valencia U., IFIC /Yale U. /Arizona U. /Louis Pasteur U., Strasbourg I /Orsay, LAL /KEK, Tsukuba /Moscow State U. /Lisbon, LIFEP /CERN /Durham U. /Valencia U., IFIC /Sao Paulo, IFT /Fermilab /Zurich, ETH /Boston U. /DESY /CERN /Saclay, SPhT /Durham U. /Cambridge U. /Michigan State U. /Louis Pasteur U., Strasbourg I /Orsay, LAL /Annecy, LAPTH /Fermilab /CERN /Arizona U. /Northwestern U. /Argonne /Kyoto U. /Valencia U., IFIC /UC, Berkeley /LBL, Berkeley

    2011-12-05

    We present a collection of signatures for physics beyond the standard model that need to be explored at the LHC. The signatures are organized according to the experimental objects that appear in the final state, and in particular the number of high p{sub T} leptons. Our report, which includes brief experimental and theoretical reviews as well as original results, summarizes the activities of the 'New Physics' working group for the 'Physics at TeV Colliders' workshop (Les Houches, France, 11-29 June, 2007).

  19. Mini-Proceedings, 18th Meeting of the Working Group on Radiative Corrections and MC Generators for Low Energies

    CERN Document Server

    Masjuan, P; Venanzoni, G

    2016-01-01

    The mini-proceedings of the 18$^{\\mathrm{th}}$ Meeting of the "Working Group on Radiative Corrections and MonteCarlo Generators for Low Energies" held in Frascati, 19$^{\\mathrm{th}}$ - 20$^{\\mathrm{st}}$ May, are presented. These meetings, started in 2006, have as aim to bring together experimentalists and theoreticians working in the fields of meson transition form factors, hadronic contributions to the anomalous magnetic moment of the leptons, and the effective fine structure constant. The development of MonteCarlo generators and Radiative Corrections for precision $e^+e^-$ and $\\tau$-lepton physics are also covered, with emphasis on meson production. At this workshop, a documentary entitled {\\it Bruno Touschek with AdA in Orsay} commemorating the first observation of electron-positron collisions in a laboratory was also presented. With this edition, the working group reaches 10 years of continuous activities.

  20. Workshops for state review of site suitability criteria for high-level radioactive waste repositories. Discussion Group reports

    International Nuclear Information System (INIS)

    1977-10-01

    The NRC Waste Management Program and the Office of State Programs held three regional workshops to solicit ideas from State executives and legislators on the siting and licensing procedures for high level waste repositories and to solicit comments on the NRC preliminary site suitability criteria. The workshops were held in Denver, Colorado; New Orleans, Louisiana; and Philadelphia, Pennsylvania during the period 19-30 September 1977. The reports from these workshops are contained herein. The workshops were attended by 170 invited State executives and legislators from 46 states. In addition, there were over 80 observers from diverse backgrounds including the general public, government, industry, professional consultants and university faculty. The workshops were announced in the Federal Register on September 1, 1977

  1. Workshop on decommissioning

    International Nuclear Information System (INIS)

    Broden, K.

    2005-12-01

    A Nordic workshop on decommissioning of nuclear facilities was held at Risoe in Denmark September 13-15, 2005. The workshop was arranged by NKS in cooperation with the company Danish Decommissioning, DD, responsible for decommissioning of nuclear facilities at Risoe. Oral presentations were made within the following areas: International and national recommendations and requirements concerning decommissioning of nuclear facilities Authority experiences of decommissioning cases Decommissioning of nuclear facilities in Denmark Decommissioning of nuclear facilities in Sweden Plans for decommissioning of nuclear facilities in Norway Plans for decommissioning of nuclear facilities in Finland Decommissioning of nuclear facilities in German and the UK Decommissioning of nuclear facilities in the former Soviet Union Results from research and development A list with proposals for future work within NKS has been prepared based on results from group-work and discussions. The list contains strategic, economical and political issues, technical issues and issues regarding competence and communication. (au)

  2. R and D activities of the ESARDA NDA working group

    International Nuclear Information System (INIS)

    Guardini, S.; Bignan, G.

    1999-01-01

    The aim of this paper is to report the R and D activities of the ESARDA Working Group on Techniques and Standards for Non-Destructive Analysis (NDA), as well as to discuss the role and possibilities of the group in the modern R and D scenario in safeguards and non-proliferation. The main tasks of the ESARDA NDA Working have been identified as being to: Define needs for procedural standards and reference materials; Design and manage the production and characterisation of reference materials; Assess and contribute to improving the performances of NDA techniques; Set up and maintain a list of NDA instruments and methods currently used for Safeguards purposes; and, through the above activities, assist Operators and Safeguards Authorities in their duty of Safeguards implementation. Members and observers appointed to the working group represent plant operators, the nuclear industry, R and D laboratories, NDA instrument developers and both safeguards control authorities. The participation of major European plant operators and of the EURATOM Safeguards Directorate and IAEA has always been assured and contributes to the good outcome of the WG activities. The ongoing R and D activities of the NDA Working Group are: Monte Carlo performance intercomparisons; 242 Pu accuracy assessment and improvement; NDA Sampling errors; General NDA performance evaluations. Some milestones have recently been reached: The 242 Pu uncertainty improvement project is coming to an end with the issuing of a new isotopic correlation; The NCC 'reals' evaluation and the Monte Carlo round robin is producing its first results; The Uranium Enrichment Round Robin Exercise has been completed; The waste drum standards are being characterised and constructed: they will be available by spring 1998. The round robin amongst laboratories will then start: summer 1998. Future activities comprise, beside the above issues, technical problems linked with the new challenges posed by new regimes of safeguards and non

  3. HEP Software Foundation Community White Paper Working Group - Detector Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Apostolakis, J; et al.

    2018-03-12

    A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation applications of HEP experiments and the improvements that will need to be made in order to meet the goals of future HEP experimental programmes. The scope of the topics covered includes the main components of a HEP simulation application, such as MC truth handling, geometry modeling, particle propagation in materials and fields, physics modeling of the interactions of particles with matter, the treatment of pileup and other backgrounds, as well as signal processing and digitisation. The resulting work programme described in this document focuses on the need to improve both the software performance and the physics of detector simulation. The goals are to increase the accuracy of the physics models and expand their applicability to future physics programmes, while achieving large factors in computing performance gains consistent with projections on available computing resources.

  4. Report of the Working Group on Far Field Accelerators

    International Nuclear Information System (INIS)

    Cha-Mei Tang

    1992-01-01

    This report describes the accomplishments of the Working Group on Far Field Accelerators. In addition to hearing presentations of current research, the group produced designs for ''100 MeV'' demonstration accelerators, ''1 GeV'' conceptual accelerators and a small electron beam source. Two of the ''100 MeV'' designs, an Inverse Free Electron Laser (IFEL) and an Inverse Cerenkov Accelerator (ICA), use the CO 2 laser and the 50 MeV linac at the Advanced Test Facility (ATF) at Brookhaven National Laboratory (BNL), requiring only modest changes in the current experimental setups. By upgrading the laser, an ICA design demonstrated 1 GeV acceleration in a gas cell about 50 cm in length. For high average power accelerators, examples based on the IFEL concept were also produced utilizing accelerators driven by high average power FELs. The Working Group also designed a small electron beam source based on the inverse electron cyclotron resonance concept. Accelerators based on the IFEL and ICA may be the first to achieve ''100 MeV'' and ''1 GeV'' energy gain demonstration with high accelerating gradients

  5. Report of the working group for nuclear damage compensation system

    International Nuclear Information System (INIS)

    1989-01-01

    The Working Group for Nuclear Damage Compensation System was established within the Atomic Energy Commision of Japan on August 2, 1988. The Group has held five meetings to make a study on the revision of the reserve for nuclear damage compensation. The nuclear damage compensation system in Japan has been established under the Law Concerning Compensation for Nuclear Damages and the Law Concerning Contract for Compensation for Nuclear Damages. The former law requires the nuclear power plant operators to set up a reserve for damage compensation to ensure positive and quick payment of compensation in the event of an accident. The reserve is currently rely on liability insurance and a government compensation contract. The Working Group has concluded that the total reserve should be increased from the current yen10 bill. to yen30 bill. The amount of the reserve specified in the enforcement law for the Law Concerning Compensation for Nuclear Damages should also be increased accordingly. The Law Concerning compensation for Nuclear damage will also be applied to damage which occurs overseas as a result of an accident in Japan. (N.K.)

  6. Workshop on Electron-Cloud Simulations for Proton and Positron Beams (ECLOUD'02) organized by the SL Accelerator Physics Group at CERN.

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    This workshop was organized by the SL Accelerator Physics group at CERN from 15 to 18 April 2002. More than 60 participants from 17 institutes reflect the great worldwide interest in the electron-cloud phenomenon, which presently limits the performance of several storage rings and has become a concern for the LHC.

  7. Mars Exploration Study Workshop II. Report of a workshop, Ames Research Center, Moffett Field, CA (USA), 24 - 25 May 1993.

    Science.gov (United States)

    Duke, M. B.; Budden, N. A.

    1993-11-01

    This report, which summarizes the Mars Exploration Study Workshop II, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues.

  8. Workshop objectives and structure

    International Nuclear Information System (INIS)

    2004-01-01

    The overall aim of the Workshop was to create a platform in order to better understand different approaches to managing uncertainty in post-closure safety cases and regulatory approaches in different national waste management programmes. The principal objectives of the Workshop were to: - To identify common elements in different approaches for managing uncertainty. - To facilitate information exchange and to promote discussion on different technical approaches to the management and characterisation of uncertainty and on the role of risk. - To explore the merits of alternative approaches to risk-informed decision making. - To identify the potential for further developments of methods or strategies to support the management of uncertainties. The workshop was organised into plenary sessions and working group discussions: The first plenary session focused on establishing a framework for understanding the management of uncertainties and the use of risk. It comprised oral presentations drawing on a range of experience from both active participants in the development and assessment of safety cases and keynotes presentations by external participants involved in risk management in other sectors. The working group discussions covered three technical themes: Risk management and decision making. Regulatory requirements and review of uncertainty and risk in safety cases. Practical approaches and tools for the management of uncertainties and the assignment of probabilities, the use of expert judgements, and the presentation of information on uncertainties and risk were examined. The aim of the working groups was to develop an understanding of the specific issues, and to identify any further activities that will support the development and/or evaluation of safety cases. The round up plenary session brought together information and conclusions from each of the working groups. Common elements in the different approaches to treating uncertainty and risk were identified, along with

  9. Working group on unbundling of electricity trade operations 2. A group report

    International Nuclear Information System (INIS)

    2000-09-01

    The current unbundling of operations in accounts has proved inadequate. No formula or model that could be made binding by provisions have been defined for unbundled accounts. In addition, unbundling can draw a distinct line between commercial activities and network operations, which have assumed various authoritative functions. Against this background, the need for clearer unbundling has become more marked. The working group suggests that the current provisions on unbundling of trade operations should be tightened and that the unbundling should be made clearer especially in terms of allocation of joint costs. For this, the necessary preparations by the authorities should be initiated urgently. At the same time, the working group proposes that network operations should be unbundled from other operations by incorporation or by unbundling them into a separate public utility. The smallest electric utilities should be exempted from the obligation of incorporating network operations. According to the working group, the lower limit could be fixed e.g. at 70 GWh a year. The working group also suggests that the licensees must own the electricity networks they operate. The licensees could not rent their networks from the mother company nor lease them from a financing company. The model proposed by the working group would redress the major problems connected with the supervision of the electricity market. The monopoly, i.e. the electricity network operations, under the supervision of the Electricity Market Authority could thus be unbundled. This would improve the functioning of the market and facilitate the supervision. However, the model would not abolish the tax concession of municipal public utilities in competitive trade operations, production and sale of electricity. The tax concession may affect the competitive situation on the electricity market. (orig.)

  10. Introducing the AAS Working Group on Astroinformatics and Astrostatistics

    Science.gov (United States)

    Ivezic, Zeljko

    2014-01-01

    In response to two White Papers submitted to the Astro2010 Decadal Survey (1,2), a new AAS Working Group on Astroinformatics and Astrostatistics (WGAA) has been approved by the AAS Council at the 220th Meeting, June 2012, in Anchorage. The motivation for this WG is the growing importance of the interface between astronomy and various branches of applied mathematics, computer science and the emerging field of data science. With the new data-intensive projects envisioned for the coming decade, the need for advice derived from the focused attention of a group of AAS members who work in these areas is bound to increase. The Working Group is charged with spreading awareness of rapidly advancing computational techniques, sophsticated statistical methods, and highly capble software to further the goals of astronomical and astrophysical research. The three main strategic goals adopted by the WGAA Steering Committee for the next few years are to: (i) develop, organize and maintain methodological resources (such as software tools, papers, books, and lectures); (ii) enhance human resources (such as foster the creation of career paths, establish a Speakers' Bureau, establish and maintain an archived discussion forum, enable periodic news distribution); and (iii) organize topical meetings. The WGAA Steering Committee at this time includes twelve members: Kirk Borne, George Djorgovski, Eric Feigelson, Eric Ford, Alyssa Goodman, Joe Hilbe, Zeljko Ivezic (chair), Ashish Mahabal, Aneta Siemiginowska, Alex Szalay, Rick White, and Padma Yanamandra-Fisher. I will summarize our accomplishments since July 2012. (1) Astroinformatics: A 21st Century Approach to Astronomy (Borne & 90 coauthors), (2) The Astronomical Information Sciences: A Keystone for 21st-Century Astronomy (Loredo & 72 coauthors)

  11. Standard compensation for power cuts. Working group report

    International Nuclear Information System (INIS)

    2002-07-01

    The Working Group was commissioned to draw up a proposal in the form of a Government Bill for provisions to be included in the Electricity Market Act on imposing an obligation on the distribution net operator to pay a standard compensation to the users of electricity for the event that they get no access to electricity. The Working Group should consider especially a model of standard compensation presented in the final report by Mr. Jarl Forsten, Deputy Director General of the Technical Research Centre of Finland VTT, published on 30 April 2002 that the amount of standard compensation should not depend on the reason for the power cut. The Working Group proposes that the Electricity Market Act should be amended by provisions providing that a distribution net operator shall pay to the user of electricity a standard compensation for power cuts lasting over 12 hours. The amount of compensation shall be based on the annual network service fee and a sliding scale of compensation related to the duration of the power cut shall be applied. The maximum compensation shall be paid when the power cut lasts more than five days. The maximum amount of individual compensations shall be fixed at EUR 700. The proposed provisions on standard compensation in the event of power cuts are aimed at amending the provisions in Chapter 6a of the Electricity Market Act on price reduction and compensation because of fault in the supply of electricity. The aim of the introduction of standard compensation for power cuts is to persuade distribution net operators to make an effort to minimize the time for power cuts. (orig.)

  12. Presentation of the G-24 technical working group on training

    International Nuclear Information System (INIS)

    Haber, S.

    1993-01-01

    The Technical Working Group on Training (TWG-T) was created during the Plenary Session of September 1992 in order to inform the Members on ongoing activities in the Nuclear Training field, define redundancies and gaps of the ''Assistance Programs'', and propose efficient ways to progress. Training was recognized as one major activity through which operational safety can be very effectively and quite quickly improved and therefore the Plenary Session unanimously decided to launch a TWG on the subject. The present report is issued one year after the creation of the TWG. It summarizes the major steps of the activities and presents the relevant results. It also contains copies of documents on training infrastructures and requirements, provided by the recipient countries during the course of the work

  13. Division XII / Commission 41 / Working Group Historical Instruments

    Science.gov (United States)

    Pigatto, Luisa; Il-Seong, Nha; Hamel, Jürgen; Johnson, Kevin; Kochhar, Rajesh K.; Nakamura, Tsuko; Orchiston, Wayne; Pettersen, Bjørn R.; Schechner, Sara J.; Yunli, Shi

    The Historical Instruments Working Group (WG-HI) and Commission 41 started planning an interdisciplinary conference titled Astronomy and its instruments before and after Galileo since January 2007. This conference, as an IYA2009 initiative, aims “to highlight mankind's path toward an improved knowledge of the sky using mathematical and mechanical tools as well as monuments and buildings, giving rise, in doing so, to scientific astronomy”. Commission 46 and Commission 55 also support this conference, to be held on the Isle of San Servolo, Venice (Italy), 27 September 3 October 2009. As a fact of history, it was in Venice that Galileo was advised and got material (glass) to make his telescope, and in Venice he presented an working instrument to Venetian Doge in August 1609. The conference is co-sponsored by IAU as a Joint Symposium with the INAF Astronomical Observatory of Padova, Italy.

  14. The AAS Working Group on Accessibility and Disability (WGAD)

    Science.gov (United States)

    Monkiewicz, Jacqueline A.; Shanahan, J.; Murphy, Nicholas Arnold; Gilbert, Lauren

    2016-06-01

    The Working Group on Accessibility and Disability (WGAD) was formed by the Council of the American Astronomical Society in late 2015 in order to monitor and addresses issues of inclusivity in the astronomical community related to disability. WGAD promotes of the principles of universal accessibility and disability justice in both professional astronomy and astronomy education. The short term goals of WGAD for the next two years include producing a set of guidelines for a wide range of activities including supporting improved access to journals, data, and conferences. We will provide information and training regarding universal design as a guiding principle. The longer term goals of WGAD include integrating universal design as primary design strategy across the board in our many aspects of daily work life.

  15. Work group design in pharmacy: the pharmacist-technician team.

    Science.gov (United States)

    Kershaw, B P; Solomon, D K; Zarowitz, B J

    1987-05-01

    The contemporary pharmacy practice manager faces the challenge of designing pharmacy service programs that not only satisfy the needs of the patient, but at the same time satisfy and motivate the pharmacists and technicians who sustain the programs. This research examined the team design, which has been recommended but not fully described in the literature. This application did not explore the full potential of the team design in the hospital pharmacy setting. More study is needed in this area to assess the impact of work group design on the expansion of clinical programs, employee turnover rates, quality and quantity of work produced, and, most important, the impact on job satisfaction enjoyed by pharmacists and technicians.

  16. Summary of conclusions of the vacuum photodiode working group

    International Nuclear Information System (INIS)

    Willis, W.

    1988-01-01

    This report presents the design of a 30 MV gun. In considering the design of the vacuum photodiode switched to drive the accelerating field in the gun, we have paid attention to the work of the groups on high-voltage pulsing and on the design of the laser. We have found that we can trade off reduced laser power at the cost of a higher charging voltage for our one stage accelerator. We have presented the various parameter sets to the two groups and attempted to measure their enthusiasm for each set, and we have chosen the set that seems to provide an equal level of difficulty on both sides. 1 fig., 1 tab

  17. Summary of the working group on FEL theory

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrini, C.

    1984-01-01

    The working group on FEL theory dedicated most of its discussions to topics relevant to the high gain regime in a free electron laser. In addition the area of interest was mainly restricted to FELs for the production of XUV radiation (<1000 A). A list of the topics that were felt to be relevant is: (1) characterization of the FEL high gain regime; (2) the amplified spontaneous emission mode of operation (ASE); (3) superradiance in FELs; (4) diffraction effects for high gain FELs; (5) noise and start-up; (6) coherence properties of the radiation for the ASE and superradiant FELS. 9 references.

  18. Summary of the working group on FEL theory

    International Nuclear Information System (INIS)

    Pellegrini, C.

    1984-01-01

    The working group on FEL theory dedicated most of its discussions to topics relevant to the high gain regime in a free electron laser. In addition the area of interest was mainly restricted to FELs for the production of XUV radiation (<1000 A). A list of the topics that were felt to be relevant is: (1) characterization of the FEL high gain regime; (2) the amplified spontaneous emission mode of operation (ASE); (3) superradiance in FELs; (4) diffraction effects for high gain FELs; (5) noise and start-up; (6) coherence properties of the radiation for the ASE and superradiant FELS. 9 references

  19. A User Guide to the ION Work Group Server

    CERN Document Server

    Miotto, A; CERN. Geneva; Jones, R W L; Dodgson, M; Miotto, A

    1999-01-01

    This guide describes the computing ressources available to the member of the ALICE collaboration. It includes a description of: the general services such as PLUS, SHIFT and CSF; the services such as the ION and NA49 WGS (Work Group Servers) dedicated to the members of ALICE and of the other heavy ion experiments at CERN; some Unix tools such as AFS, shells, HEPiX X11 environment, LSF etc; the access to magnetic tapes. This document is also available in pdf format.

  20. Activities of the PNC Nuclear Safety Working Group

    International Nuclear Information System (INIS)

    Kato, W.Y.

    1991-01-01

    The Nuclear Safety Working Group of the Pacific Nuclear Council promotes nuclear safety cooperation among its members. Status of safety research, emergency planning, development of lists of technical experts, severe accident prevention and mitigation have been the topics of discussion in the NSWG. This paper reviews and compares the severe accident prevention and mitigation program activities in some of the areas of the Pacific Basin region based on papers presented at a special session organized by the NSWG at an ANS Topical Meeting as well as papers from other sources

  1. Report of the 1997 LEP2 working group on 'searches'

    International Nuclear Information System (INIS)

    Allanach, B.C.; Blair, G.A.; Diaz, M.A.

    1997-08-01

    A number of research program reports are presented from the LEP2 positron-electron collider in the area of searches for Higgs bosons, supersymmetry and supergravity. Working groups' reports cover prospective sensitivity of Higgs boson searches, radiative corrections to chargino production, charge and colour breaking minima in minimal Supersymmetric Standard Model, R-party violation effects upon unification predictions, searches for new pair-produced particles, single sneutrino production and searches related to effects similar to HERA experiments. The final section of the report summarizes the LEP 2 searches, concentrating on gians from running at 200 GeV and alternative paradigms for supersymmetric phenomenology. (UK)

  2. Report of the Working Group on Diffractive Phenomena

    International Nuclear Information System (INIS)

    Bartel, W.; Bartels, J.W.

    1994-01-01

    The discussions in the working group on diffractive processes were structured according to a scheme, in which first the experimental basis was specified followed by a presentation of theoretical papers and a general exchange of views on diffractive phenomena. Since diffraction is observed in many different channels, a common session was organised with participants from other working groups, in particular from the photoproduction and DIS community. A total of about 20 individual contributions were presented including those of the common discussion. Not all of them will be included in the proceedings. Some speakers had contributions to different sessions and submitted only one summary paper, others presented ideas for future analysis and are still working and others were too busy to finish the write up before the deadline. Diffractive phenomena observed at HERA were presented by T. Greenshaw of H1 and T. Docker from the ZEUS collaboration. The DO results on diffraction may be looked up in G. Forden's contribution to the proceedings. Further experimental results relevant to the topic ran be found in papers by M. Costa and S. Levonian issued in the photoproduction subsection. Experimentally it is not always easy to identify diffractive processes because pion and ordinary Regge exchange contributions are also present. This question is addressed in G. Levman's paper. New ideas to exploit a similarity between gluon - and Pomeron exchange were discussed by H. Kowalski, and G. Knies proposed a thrust analysis for diffractive events. In both cases work is going on which is not yet ready for a publication. (i. Ingelman reviewed existing Mt. Carlo programs on diffractive processes like POMPYT, RAPGAP and a program based on the Nikolaev - Zakharov approach to diffraction. These programs are well documented and need no further description in these proceedings. The same argument applies to V. Fadins talk, who reviewed published results on higher order corrections to the BFKL

  3. COSPAR/PRBEM international working group activities report

    Science.gov (United States)

    Bourdarie, S.; Blake, B.; Cao, J. B.; Friedel, R.; Miyoshi, Y.; Panasyuk, M.; Underwood, C.

    It is now clear to everybody that the current standard AE8 AP8 model for ionising particle specification in the radiation belts must be updated But such an objective is quite difficult to reach just as a reminder to develop AE8 AP8 model in the seventies was 10 persons full time for ten years It is clear that world-wide efforts must be combined because not any individual group has the human resource to perform these new models by themselves Under COSPAR umbrella an international group of expert well distributed around the world has been created to set up a common framework for everybody involved in this field Planned activities of the international group of experts are to - Define users needs - Provide guidelines for standard file format for ionising measurements - Set up guidelines to process in-situ data on a common basis - Decide in which form the new models will have to be - Centralise all progress done world-wide to advise the community - Try to organise world-wide activities as a project to ensure complementarities and more efficiencies between all efforts done Activities of this working group since its creation will be reported as well as future plans

  4. Student attitudes towards socially acceptable and unacceptable group working practices.

    Science.gov (United States)

    Underwood, Jean D M

    2003-08-01

    While there is much support for co-operative learning among learning theorists, not all learners exhibit the same enthusiasm for groupwork. A number of factors such as sex, group size and ability mix, subject domain, task type and organization have been shown to influence the effectiveness of co-operative and collaborative learning. This study established learners' attitudes to various shared working scenarios. In this mixed design, 140 post-graduate teacher trainees were asked to imagine their responses to seven groupwork scenarios presented as a series of short vignettes. The vignettes varied on the degree of co-operation required; the sex of the prospective co-worker(s) including single and mixed-sex groups; type of assessment, including no assessment at all; and on academically acceptable and unacceptable 'shared' working practices. Anticipated attitudinal and behavioural responses of the students were assessed by questionnaire. On the whole, students were cautiously willing to be involved in groupwork. There were caveats, however. Factors such as the characteristics of the group members, the level and type of assessment procedures in operation, and individual differences, including sex and self-reported social deviance, also governed their responses. There was very limited agreement to be involved in socially undesirable collaborative group activities at a personal level or to condone such activities by others. Those students who showed a tendency towards mild anti-social behaviour were more willing to take direct punitive action against non-contributors than their peers. Female students were more willing to invoke the help of the tutor than their male counterparts, but only if the anti-social behaviour impacted on them personally.

  5. The Halden Reactor Project workshop on HAMMLAB 2000

    International Nuclear Information System (INIS)

    Sebok, Angelia L.; Grini, Rolf-Einar; Larsen, Marit; Ness, Eyvind; Soerensen, Aimar

    1998-01-01

    A workshop on HAMMLAB 2000 was organised in Halden, May 26-27, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the design of HAMMLAB 2000 and to discuss the future research agenda. The workshop began with several presentations summarising the status of the current HAMMLAB 2000 project. Three invited speakers with expertise in human-machine laboratories and simulators delivered presentations of their experiences. Later, the workshop was divided into five working groups that discussed the following issues in parallel: (1) Technical Studies, Research Agenda; (2) Human Factors Research Agenda; (3) Data Collection; (4) Synergy with Other Industries; (5) Virtual Reality. Each group produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. This report summarises the presentation of the invited speakers, and the discussions and recommendations of the individual working groups. (author)

  6. A stress management workshop improves residents' coping skills.

    Science.gov (United States)

    McCue, J D; Sachs, C L

    1991-11-01

    We describe the effectiveness of a stress management workshop designed for physicians. Of the 64 medicine, pediatrics, and medicine-pediatrics residents who agreed to participate in the workshop, the 43 who could be freed from clinical responsibilities constituted the intervention group; the 21 residents who could not be freed from clinical responsibilities were asked to be the nonintervention group. The ESSI Stress Systems Instrument and Maslach Burnout Inventory were administered to control subjects and workshop participants 2 weeks before and 6 weeks after the workshop. The half-day workshops taught management of the stresses of medical practice through: (1) learning and practicing interpersonal skills that increase the availability of social support; (2) prioritization of personal, work, and educational demands; (3) techniques to increase stamina and attend to self-care needs; (4) recognition and avoidance of maladaptive responses; and (5) positive outlook skills. Overall, the ESSI Stress Systems Instrument test scores for the workshop participants improved (+1.27), while the nonintervention group's mean scores declined (-0.65). All 21 individual ESSI Stress Systems Instrument scale items improved for the workshop, compared with eight of 21 items for the nonintervention group. The workshop group improved in the Maslach Burnout Inventory emotional exhaustion scale and deteriorated less than the nonintervention group in the depersonalization scale. We conclude that a modest, inexpensive stress management workshop was received positively, and can lead to significant short-term improvement in stress and burnout test scores for medicine and pediatrics residents.

  7. Work place air particulate monitoring of automobile workshops for public health and safety

    International Nuclear Information System (INIS)

    Siddique, N.; Waheed, S.

    2013-01-01

    Twenty-eight pairs of coarse and fine air particulate samples were collected in front of an automotive workshop located at Tasmasipabad on Chaklala Road in Rawalpindi using a Gent sampler and polycarbonate filters. These samples were collected during the period; 7th to 27th of April 2009. The gravimetric data (PM 2.5 and PM 10 ) were obtained for these samples and were found to exceed the Pakistani standards. Black carbon (BC) was also determined using reflectance measurements and it was found that BC contributed significantly more to the fine mass than to the coarse fraction; i.e. ∼10 to ∼3 %, respectively. This is not surprising as soot is emitted by combustion processes and is usually found in the fine particulate mass. Using instrumental neutron activation analysis technique all 28 pairs of filters were analyzed for >30 elements. Major elements, in the coarse mass fraction, include Al, K, Fe, Sr, Na, and Zn implying soil as the major source while BC was found to be a higher contributor of PM 2.5 . An episode of high PM 2.5 was observed on the 18th of April 2009. Back trajectory analysis showed that the air mass originated from the Middle East where a dust storm was in progress over Iraq. (author)

  8. Working Group I: Parton distributions: Summary report for the HERA LHC Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Dittmar, M.; /Zurich, ETH; Forte, S.; /Milan U. /INFN, Milan; Glazov, A.; /DESY; Moch, S.; /DESY, Zeuthen; Alekhin, S.; Altarelli, G.; Andersen, Jeppe R.; Ball, R.D.; Blumlein, J.; Bottcher, H.; Carli, T.; Ciafaloni, M.; Colferai, D.; Cooper-Sarkar, A.; Corcella, G.; Del Debbio, L.; Dissertori, G.; Feltesse, J.; Guffanti, A.; Gwenlan, C.; Huston, J.; /Zurich, ETH /DESY, Zeuthen /Serpukhov, IHEP /CERN /Rome III U. /INFN, Rome3 /Cambridge U. /Edinburgh U. /Florence U. /INFN, Florence /Oxford U. /DSM, DAPNIA, Saclay

    2005-11-01

    We provide an assessment of the impact of parton distributions on the determination of LHC processes, and of the accuracy with which parton distributions (PDFs) can be extracted from data, in particular from current and forthcoming HERA experiments. We give an overview of reference LHC processes and their associated PDF uncertainties, and study in detail W and Z production at the LHC.We discuss the precision which may be obtained from the analysis of existing HERA data, tests of consistency of HERA data from different experiments, and the combination of these data. We determine further improvements on PDFs which may be obtained from future HERA data (including measurements of F{sub L}), and from combining present and future HERA data with present and future hadron collider data. We review the current status of knowledge of higher (NNLO) QCD corrections to perturbative evolution and deep-inelastic scattering, and provide reference results for their impact on parton evolution, and we briefly examine non-perturbative models for parton distributions. We discuss the state-of-the art in global parton fits, we assess the impact on them of various kinds of data and of theoretical corrections, by providing benchmarks of Alekhin and MRST parton distributions and a CTEQ analysis of parton fit stability, and we briefly presents proposals for alternative approaches to parton fitting. We summarize the status of large and small x resummation, by providing estimates of the impact of large x resummation on parton fits, and a comparison of different approaches to small x resummation, for which we also discuss numerical techniques.

  9. Gender-heterogeneous working groups produce higher quality science.

    Directory of Open Access Journals (Sweden)

    Lesley G Campbell

    Full Text Available Here we present the first empirical evidence to support the hypothesis that a gender-heterogeneous problem-solving team generally produced journal articles perceived to be higher quality by peers than a team comprised of highly-performing individuals of the same gender. Although women were historically underrepresented as principal investigators of working groups, their frequency as PIs at the National Center for Ecological Analysis and Synthesis is now comparable to the national frequencies in biology and they are now equally qualified, in terms of their impact on the accumulation of ecological knowledge (as measured by the h-index. While women continue to be underrepresented as working group participants, peer-reviewed publications with gender-heterogeneous authorship teams received 34% more citations than publications produced by gender-uniform authorship teams. This suggests that peers citing these publications perceive publications that also happen to have gender-heterogeneous authorship teams as higher quality than publications with gender uniform authorship teams. Promoting diversity not only promotes representation and fairness but may lead to higher quality science.

  10. Gender-heterogeneous working groups produce higher quality science.

    Science.gov (United States)

    Campbell, Lesley G; Mehtani, Siya; Dozier, Mary E; Rinehart, Janice

    2013-01-01

    Here we present the first empirical evidence to support the hypothesis that a gender-heterogeneous problem-solving team generally produced journal articles perceived to be higher quality by peers than a team comprised of highly-performing individuals of the same gender. Although women were historically underrepresented as principal investigators of working groups, their frequency as PIs at the National Center for Ecological Analysis and Synthesis is now comparable to the national frequencies in biology and they are now equally qualified, in terms of their impact on the accumulation of ecological knowledge (as measured by the h-index). While women continue to be underrepresented as working group participants, peer-reviewed publications with gender-heterogeneous authorship teams received 34% more citations than publications produced by gender-uniform authorship teams. This suggests that peers citing these publications perceive publications that also happen to have gender-heterogeneous authorship teams as higher quality than publications with gender uniform authorship teams. Promoting diversity not only promotes representation and fairness but may lead to higher quality science.

  11. Reports from the working group on neutron scattering

    International Nuclear Information System (INIS)

    1979-06-01

    The present report contains papers dating from July 1978 until May 1979. During this period the experimental facilities have been expanded; a new four-circuit neutron spectrometer was installed and, together with the Fritz Hafer Institute, a measuring point was set up for investigations of ideal crystals, the Compton scattering equipment has been essentially improved. The report contains a contribution on the mechanics and the control of the neutron diffractometers existing at BER II. The main subjects of the scientific research work were magnetic structures and phase transitions, electron densities and chemical bonds, structure and dynamics of molecular crystals. At the BER II reactor measuring opportunities could be offered to a number of guest groups. Their research activities are reported, too. In addition to those made at the Berlin reactor BER II measurements could be made at the accelerator VICKSI of the Hahn-Meitner Institute and at the reactors of the Institute Laue-Langevin at Grenoble and of the Research Establishment at Riso by the working groups. (orig.) [de

  12. Chemical Safety Vulnerability Working Group report. Volume 3

    International Nuclear Information System (INIS)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 3 consists of eleven appendices containing the following: Field verification reports for Idaho National Engineering Lab., Rocky Flats Plant, Brookhaven National Lab., Los Alamos National Lab., and Sandia National Laboratories (NM); Mini-visits to small DOE sites; Working Group meeting, June 7--8, 1994; Commendable practices; Related chemical safety initiatives at DOE; Regulatory framework and industry initiatives related to chemical safety; and Chemical inventory data from field self-evaluation reports

  13. Chemical Safety Vulnerability Working Group report. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 3 consists of eleven appendices containing the following: Field verification reports for Idaho National Engineering Lab., Rocky Flats Plant, Brookhaven National Lab., Los Alamos National Lab., and Sandia National Laboratories (NM); Mini-visits to small DOE sites; Working Group meeting, June 7--8, 1994; Commendable practices; Related chemical safety initiatives at DOE; Regulatory framework and industry initiatives related to chemical safety; and Chemical inventory data from field self-evaluation reports.

  14. The Powell Volcano Remote Sensing Working Group Overview

    Science.gov (United States)

    Reath, K.; Pritchard, M. E.; Poland, M. P.; Wessels, R. L.; Biggs, J.; Carn, S. A.; Griswold, J. P.; Ogburn, S. E.; Wright, R.; Lundgren, P.; Andrews, B. J.; Wauthier, C.; Lopez, T.; Vaughan, R. G.; Rumpf, M. E.; Webley, P. W.; Loughlin, S.; Meyer, F. J.; Pavolonis, M. J.

    2017-12-01

    Hazards from volcanic eruptions pose risks to the lives and livelihood of local populations, with potential global impacts to businesses, agriculture, and air travel. The 2015 Global Assessment of Risk report notes that 800 million people are estimated to live within 100 km of 1400 subaerial volcanoes identified as having eruption potential. However, only 55% of these volcanoes have any type of ground-based monitoring. The only methods currently available to monitor these unmonitored volcanoes are space-based systems that provide a global view. However, with the explosion of data techniques and sensors currently available, taking full advantage of these resources can be challenging. The USGS Powell Center Volcano Remote Sensing Working Group is working with many partners to optimize satellite resources for global detection of volcanic unrest and assessment of potential eruption hazards. In this presentation we will describe our efforts to: 1) work with space agencies to target acquisitions from the international constellation of satellites to collect the right types of data at volcanoes with forecasting potential; 2) collaborate with the scientific community to develop databases of remotely acquired observations of volcanic thermal, degassing, and deformation signals to facilitate change detection and assess how these changes are (or are not) related to eruption; and 3) improve usage of satellite observations by end users at volcano observatories that report to their respective governments. Currently, the group has developed time series plots for 48 Latin American volcanoes that incorporate variations in thermal, degassing, and deformation readings over time. These are compared against eruption timing and ground-based data provided by the Smithsonian Institute Global Volcanism Program. Distinct patterns in unrest and eruption are observed at different volcanoes, illustrating the difficulty in developing generalizations, but highlighting the power of remote sensing

  15. Groups of Galaxies in the Nearby Universe Proceedings of the ESO Workshop held at Santiago de Chile

    CERN Document Server

    Saviane, Ivo; Borissova, Jordanka

    2007-01-01

    For every galaxy in the field or in clusters, there are about three galaxies in groups. The Milky Way itself resides in a group, and groups can be found at high redshift. The current generation of 10-m class telescopes and space facilities allows the observation of the members of nearby groups with exquisite detail, and their properties can be correlated with the global properties of their host group. Groups in the local Universe offer us the chance to study galaxies in environments characterized by strong interactions. In the cosmological context, groups trace large-scale structures better than clusters, and the evolution of groups and clusters appears to be related. All these aspects of research on groups of galaxies are summarized in this book written by scientists working in various fields.

  16. Government's role in power supply security. A working group report

    International Nuclear Information System (INIS)

    2004-01-01

    The working group was to analyse the Government's role in terms of improving the security of supply of the electricity market in exceptionally difficult capacity situations and to make propositions for the ways of arranging a tendering procedure concerning security of supply and capacity control, so as to meet the requirements of the EC Energy Internal Market Directives after 1 July 2004. The Working Group considers that there is no need at this stage to introduce a separate new system intended as a supplement to technical reserves in Finland. Such a system would not bring new capacity for the use of the power system, and in the case of existing capacity, production would only be transferred from one market to another. However, the situation may change from this, if there occur such factors on the market that aim to raise the market price of electricity or if it turned out that reserve power plants would be decommissioned on a large scale. The working group proposes that such a provision be added to the Electricity Market Act that would oblige the electricity supplier to notify the Energy Market Authority of a planned service outage of a power plant of at least 100 MVA producing electricity separately, which would fall within the time period 1 December - 28 February. The Energy Market Authority would be vested with the powers to postpone the outage due to a tight output situation, if there are not technical or safety- bound obstacles to this. It is important for the sufficiency of the power need of the Internal Market that the price signals of the market are reflected to both producers and consumers of electricity. The working group further proposes that the Ministry of Trade and Industry would look into development of the meter-reading requirements, so that they would, for their part, create the conditions for price flexibility in power consumption and for new sales products of electricity. In addition, tightening of the hourly metering requirement related to the

  17. The Emissions-Free Energy (EFE) Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Humphries, R., E-mail: Roger.Humphries@amec.com [AMEC NSS, Toronto, Ontario (Canada)

    2014-07-01

    There has been a growing international interest in smaller, simpler reactors for generating electricity and process heat. They incorporate modern technological advances in reactor design, reactor safety, modular construction, proliferation resistance, and risk reduction. The interest in these reactors has been driven by many factors, including the need to reduce greenhouse gas emissions and provide reliable power in 'off-grid' or 'edge-of-grid' locations. Licensing these new small reactors, particularly in Canada's resource rich remote northern regions, will raises issues in a wide variety of technical, institutional, socio-economic and regulatory policy areas. The first small reactor vendor to file a license application or to engage the CNSC in its pre-licensing vendor design review process is going to have to deal with these issues. However these issues affect the entire small reactor industry and it is essential that the industry as a whole address them. Accordingly, a small reactor industry-wide Working Group has been established to identify and prioritize the issues that need to be addressed and work with the CNSC and other interested stakeholders to agree on a resolution acceptable to all parties. The objective of the small reactor industry is to introduce an economical, emissions-free source of electrical and thermal energy. It is the opinion of the WG that our emphasis ought to be on the product rather than the technology, hence the name Emissions-Free Energy Working Group. The EFE WG has initiated contact with the CNSC and has started its review of CNSC draft regulatory and guidance documents. (author)

  18. Deliberations of working group 2: trust and the institutional framework

    International Nuclear Information System (INIS)

    Metlay, D.

    2000-01-01

    The meeting of Working Group 2 (WG-2) was preceded by two presentations in the plenary session: 'Legal and Institutional Frameworks for Government Relations with Citizens' and 'The Role and Experience of Technical Oversight Bodies'. The first identified trust and legitimacy as key resources for effective policy making and democratic governance as well as the current progress and difficulties at OECD governments' level in promoting public trust and participation. The second described the use of technical oversight bodies to provide a function of mediation between scientists, public authorities and the general public, in order to facilitate communication and understanding of technical issues and research. Dr. Aebersold gave a presentation to WG-2 on the results of Switzerland's Expert Group on Disposal Concepts for Radioactive Waste (EKRA). This group was established to bridge between nuclear power plant operators and environmental organisations, who had opposing views of radioactive waste disposal in general, and the choice of the Wellenberg site for a geological repository in particular. The success of EKRA in having its recommendations accepted and advancing the long term waste management programme was attributed to, among other things: the popular acceptance of the EKRA chairman; the competence, independence and commitment of the EKRA members; the responsiveness of their recommendations to public concerns and social issues; and the openness and transparency of their work (including broad media coverage). Dr. Metlay, who chaired WG-2, described field studies that he has undertaken dealing with trust in specific institutions in the US. This initiated the discussions, which ranged from a general understanding of the nature of trust, to why it may be important in the successful siting and development of a repository. (author)

  19. French experience with Uranium compounds: conclusions of medical working group

    International Nuclear Information System (INIS)

    Berard, P.; Mazeyrat, C.; Auriol, B.; Montegue, A.; Estrabaud, M.; Grappin, L.; Giraud, J.M.

    2002-01-01

    The authors who represent several organisations and industrial firms, present observations conducted for some thirty years in France, including routine monitoring or special measurements following contamination by uranium compounds. They propose recommendations for radio toxicological monitoring of workers exposed to industrial uranium compounds and they comment on urine and faecal collections in relation to specific exposures. Our working group, set up by the CEA Medical Adviser in 1975, consists of French specialists in uranium radio toxicology. Their role is to propose recommendations for the monitoring of working conditions and exposed workers. The different plants process chemically and metallurgically, and machine large quantities of uranium with various 235U enrichments. Radio toxicological monitoring of workers exposed to uranium compounds requires examinations prescribed according to the kind of product manipulated and the industrial risk of the workplace. The range of examinations that are useful for this kind of monitoring includes lung monitoring, urine analyses and faecal sampling. The authors present the frequency of the monitoring for routine or special conditions according to industrial exposure, time and duration of collection of excreta (urine and faeces), the necessity of a work break, precautions for preservation of the samples and the ways in interpreting excretion analysis according to natural food intakes

  20. The community development workshop, appendix B.

    Science.gov (United States)

    Brill, R.; Gastro, E.; Pennington, A. J.

    1973-01-01

    The Community Development Workshop is the name given to a collection of techniques designed to implement participation in the planning process. It is an electric approach, making use of current work in the psychology of groups, mathematical modeling and systems analysis, simulation gaming, and other techniques. An outline is presented for a session of the workshop which indicates some of the psychological techniques employed, i.e. confrontation, synectics, and encounter micro-labs.

  1. Sixth international workshop on linear colliders. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Urakawa, Junji [ed.

    1995-08-01

    The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.).

  2. Sixth international workshop on linear colliders. Proceedings

    International Nuclear Information System (INIS)

    Urakawa, Junji

    1995-08-01

    The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.)

  3. Report of the first interim meeting of the Seabed Working Group Engineering Studies Task Group

    International Nuclear Information System (INIS)

    Talbert, D.M.

    1982-02-01

    The first interim meeting of the Engineering Studies Task Group (ESTG) was held at the Delft Soil Mechanics Laboratory, Delft, The Netherlands, on 21-24 September 1981. The main business of the meeting was the development of a network analysis for the ESTG. Significant progress was made; however, substantial further development remains to be accomplished. Other items discussed were (1) progress relevant to engineering studies made in the various national programs since the sixth annual meeting of the Seabed Working Group (SWG) held in Paris, February, 1981; (2) the ESTG Boundary Conditions and Scope of Work as previously defined at the Paris meeting; (3) the Draft II SWG Five-Year Plan; (4) the deep ocean drilling proposal made by the Site Selection Task Group at the Paris meeting and expanded upon at their May, 1981, meeting; and (5) a recent compilation of data from the Nares Abyssal Plain arising from the US Program studies. Finally, consideration was given to a plan for continued work by the ESTG. A brief discussion of the principal items is given. The current state of the network analysis is shown

  4. WORKSHOP: Crystalline beams

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Following pioneer work by specialists at the Soviet Novosibirsk Laboratory some ten years ago, interest developed in the possibility of 'freezing' ion beams in storage rings by pushing cooling (to smooth out beam behaviour) to its limits, the final goal being to lock the ions into a neat crystal pattern. After advances by groups working on laser cooled ions in traps, and with several cooling rings now in operation, a workshop on crystalline ion beams was organized recently by the GSI (Darmstadt) Laboratory and held at Wertheim in Germany

  5. Chemical Safety Vulnerability Working Group report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 1 contains the Executive summary; Introduction; Summary of vulnerabilities; Management systems weaknesses; Commendable practices; Summary of management response plan; Conclusions; and a Glossary of chemical terms.

  6. Working group report on energy, transportation and recreation

    International Nuclear Information System (INIS)

    Hengeveld, H.

    1991-01-01

    A working group was held to discuss the sensitivities of ecosystems and socio-economic activities relating to energy and recreation to climate change and variability, and the state and deficiencies of knowledge concerning these topics. It was concluded that the ecological integrity of national parks is at risk. Aggregate yields of fish in the Great Plains should improve with rising temperature, however extinction in southerly rivers is likely. Net reduction in hydro power generation appears probable due to decreased runoff and more frequent and severe drought. Total energy demand will be impacted by increased space cooling demands, up to 30% reduction in space heating demands, changing demands in agriculture for irrigation, water management and crop cultivation, and changing energy demands for road transport. Alternative strategies for displacement of fossil fuel use include low head hydro development, nuclear, wind energy, photovoltaics, ethanol from wood fibre, and hydrogen generated from surplus hydro power

  7. The Third Annual NASA Science Internet User Working Group Conference

    Science.gov (United States)

    Lev, Brian S. (Editor); Gary, J. Patrick (Editor)

    1993-01-01

    The NASA Science Internet (NSI) User Support Office (USO) sponsored the Third Annual NSI User Working Group (NSIUWG) Conference March 30 through April 3, 1992, in Greenbelt, MD. Approximately 130 NSI users attended to learn more about the NSI, hear from projects which use NSI, and receive updates about new networking technologies and services. This report contains material relevant to the conference; copies of the agenda, meeting summaries, presentations, and descriptions of exhibitors. Plenary sessions featured a variety of speakers, including NSI project management, scientists, and NSI user project managers whose projects and applications effectively use NSI, and notable citizens of the larger Internet community. The conference also included exhibits of advanced networking applications; tutorials on internetworking, computer security, and networking technologies; and user subgroup meetings on the future direction of the conference, networking, and user services and applications.

  8. Working group investigates the electrical technology of the nineties

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    The article describes the terms of reference of the Working Group charged with clarifying the technical and economic as well as environmental prerequisites for new electrical supplies as a basis for decisions concerning practical application during the 1990's in Sweden. The article reports that electrical production in Sweden for the rest of this century will be principally based on conventional processes using fuels available within the country. And that further development of such processes will, to a certain extent be based on commercial principles. Over and above this, special efforts are motivated within the Energy Research Programme principally in the fields of the environment and the efficient combustion of fuels including nuclear fusion. The article also includes a list of facts covering the smooth integration of the various energy systems within the Swedish infrastructure. (H.J.P.)

  9. Chemical Safety Vulnerability Working Group report. Volume 1

    International Nuclear Information System (INIS)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 1 contains the Executive summary; Introduction; Summary of vulnerabilities; Management systems weaknesses; Commendable practices; Summary of management response plan; Conclusions; and a Glossary of chemical terms

  10. National Working Group Meeting on ALK diagnostics in lung cancer.

    Science.gov (United States)

    Cooper, Wendy; Fox, Stephen; O'Toole, Sandra; Morey, Adrienne; Frances, Glenn; Pavlakis, Nick; O'Byrne, Kenneth; Dettrick, Andrew; Leong, Trishe; Rathi, Vivek; Spagnolo, Dominic; Hemmings, Chris; Singh, Mahendra; Moffat, David; Tsao, Ming-Sound; Wilner, Keith; Buller, Richard; Pitman Lowenthal, Susan; Arifeen, Shams; Binko, Justin; Alam, Mahmood

    2014-04-01

    The global landscape of molecular testing is rapidly changing, with the recent publication of the International Association for the Study of Lung Cancer (IASLC)/College of American Pathologists (CAP) guidelines and the ALK Atlas. The IASLC/CAP guidelines recommend that tumors from patients with non-small cell lung cancer (NSCLC) be tested for ALK rearrangements in addition to epidermal growth factor receptor (EGFR) mutations. The spur for this recommendation is the availability of novel therapies that target these rearrangements. This article is based on coverage of a Pfizer-sponsored National Working Group Meeting on ALK Diagnostics in Lung Cancer, held around the 15th World Lung Cancer Conference, in Sydney on October 31, 2013. It is based on the presentations given by the authors at the meeting and the discussion that ensued. The content for this article was discussed and agreed on by the authors. © 2014 Wiley Publishing Asia Pty Ltd.

  11. International Technical Working Group Cooperation to Counter Illicit Nuclear Trafficking

    International Nuclear Information System (INIS)

    Smith, D K; Niemeyer, S

    2004-01-01

    The Nuclear Smuggling International Technical Working Group (ITWG) is an international body of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking

  12. Harmonization of nuclear codes and standards, pacific nuclear council working and task group report

    International Nuclear Information System (INIS)

    Dua, S.S.

    2006-01-01

    technology; Encourage commerce among PNC member countries; Reduce the costs of fabrication, construction, testing, operation and maintenance; Facilitate the sharing of spare parts; Facilitate harmonization and alignment with other regional and international standards and criteria, and Organize and conduct training and workshops to enhance Pacific Basin countries understanding of the harmonized suite of codes and standards and criteria for their application. This paper discusses the scope and activities of the Working Group and Task Group and what it has accomplished to date

  13. Activities of the EMRAS Tritium/C14 Working Group

    International Nuclear Information System (INIS)

    Davis, P.A.; Balonov, M.; Venter, A.

    2005-01-01

    A new model evaluation program, Environmental Modeling for Radiation Safety (EMRAS), was initiated by the International Atomic Energy Agency in September 2003. EMRAS includes a working group (WG) on modeling tritium and C-14 transfer through the environment to biota and man. The main objective of this WG is to develop and test models of the uptake, formation and translocation of organically bound tritium (OBT) in food crops, animals and aquatic systems. To the extent possible, the WG is carrying out its work by comparing model predictions with experimental data to identify the modeling approaches and assumptions that lead to the best agreement between predictions and observations. Results for scenarios involving a chronically contaminated aquatic ecosystem and short-term exposure of soybeans are presently being analyzed. In addition, calculations for scenarios involving chronically contaminated terrestrial food chains and hypothetical short-term releases are currently underway, and a pinetree scenario is being developed. The preparation of datasets on tritium dynamics in large animals and fish is being encouraged, since these are the areas of greatest uncertainty in OBT modeling. These activities will be discussed in this paper

  14. The SM and NLO Multileg Working Group: Summary Report

    International Nuclear Information System (INIS)

    Andersen, J.R.; Archibald, J.; Badger, S.; Ball, R.D.; Bevilacqua, G.; Bierenbaum, I.; Binoth, T.; Boudjema, F.; Boughezal, R.; Bredenstein, A.; Britto, R.; Campanelli, M.; Campbell, J.; Carminati, L.; Chachamis, G.; Ciulli, V.; Cullen, G.; Czakon, M.; Del Debbio, L.; Denner, A.; Dissertori, G.

    2012-01-01

    After years of waiting, and after six Les Houches workshops, the era of LHC running is finally upon us, albeit at a lower initial center-of-mass energy than originally planned. Thus, there has been a great sense of anticipation from both the experimental and theoretical communities. The last two years, in particular, have seen great productivity in the area of multi-parton calculations at leading order (LO), next-to-leading order (NLO) and next-to-next-to-leading order (NNLO), and this productivity is reflected in the proceedings of the NLM group. Both religions, Feynmanians and Unitarians, as well as agnostic experimenters, were well-represented in both the discussions at Les Houches, and in the contributions to the write-up. Next-to-leading order (NLO) is the first order at which the normalization, and in some cases the shape, of perturbative cross sections can be considered reliable. This can be especially true when probing extreme kinematic regions, as for example with boosted Higgs searches considered in several of the contributions to this writeup. A full understanding for both standard model and beyond the standard model physics at the LHC requires the development of fast, reliable programs for the calculation of multi-parton final states at NLO. There have been many advances in the development of NLO techniques, standardization and automation for such processes and this is reflected in the contributions to the first section of this writeup. Many calculations have previously been performed with the aid of semi-numerical techniques. Such techniques, although retaining the desired accuracy, lead to codes which are slow to run. Advances in the calculation of compact analytic expressions for Higgs + 2 jets have resulted in the development of much faster codes, which extend the phenomenology that can be conducted, as well as making the code available to the public for the first time. A prioritized list of NLO cross sections was assembled at Les Houches in 2005

  15. The SM and NLO Multileg Working Group: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, J.R.; Archibald, J.; Badger, S.; Ball, R.D.; Bevilacqua, G.; Bierenbaum, I.; Binoth, T.; Boudjema, F.; Boughezal, R.; Bredenstein, A.; Britto, R.; Campanelli, M.; Campbell, J.; Carminati, L.; Chachamis, G.; Ciulli, V.; Cullen, G.; Czakon, M.; Del Debbio, L.; Denner, A.; Dissertori, G.; /Edinburgh U. /Zurich, ETH /Michigan State U. /CAFPE, Granada /CERN /Durham U., IPPP /DESY, Zeuthen /Democritos Nucl. Res. Ctr. /Valencia U., IFIC /Annecy, LAPTH /Zurich U. /KEK, Tsukuba /Saclay, SPhT /University Coll. London /Fermilab /INFN, Milan /Milan U. /PSI, Villigen /Florence U. /INFN, Florence /RWTH Aachen U.

    2012-04-10

    After years of waiting, and after six Les Houches workshops, the era of LHC running is finally upon us, albeit at a lower initial center-of-mass energy than originally planned. Thus, there has been a great sense of anticipation from both the experimental and theoretical communities. The last two years, in particular, have seen great productivity in the area of multi-parton calculations at leading order (LO), next-to-leading order (NLO) and next-to-next-to-leading order (NNLO), and this productivity is reflected in the proceedings of the NLM group. Both religions, Feynmanians and Unitarians, as well as agnostic experimenters, were well-represented in both the discussions at Les Houches, and in the contributions to the write-up. Next-to-leading order (NLO) is the first order at which the normalization, and in some cases the shape, of perturbative cross sections can be considered reliable. This can be especially true when probing extreme kinematic regions, as for example with boosted Higgs searches considered in several of the contributions to this writeup. A full understanding for both standard model and beyond the standard model physics at the LHC requires the development of fast, reliable programs for the calculation of multi-parton final states at NLO. There have been many advances in the development of NLO techniques, standardization and automation for such processes and this is reflected in the contributions to the first section of this writeup. Many calculations have previously been performed with the aid of semi-numerical techniques. Such techniques, although retaining the desired accuracy, lead to codes which are slow to run. Advances in the calculation of compact analytic expressions for Higgs + 2 jets have resulted in the development of much faster codes, which extend the phenomenology that can be conducted, as well as making the code available to the public for the first time. A prioritized list of NLO cross sections was assembled at Les Houches in 2005

  16. Report of the accelerator and beam line options working group

    International Nuclear Information System (INIS)

    Ankenbrandt, C.; Bogacz, A.; Bogert, D.; Bossert, R.C.; Brown, B.; Childress, S.; Crawford, C.; Dugan, G.; Even, L.; Finley, D.; Gelfand, N.; Gerig, R.; Goderre, G.; Gourlay, S.; Griffin, J.; Hahn, A.; Holmes, S.; Jackson, G.; Johnson, R.; Johnson, D.; Kerby, J.; Koepke, K.; Koizumi, G.; Koul, R.; Lamm, M.; MacLachlan, J.; Malamud, E.; Malensek, A.; Mantsch, P.; Marriner, J.; Marsh, B.; Martin, P.; Hills, F.; Moore, C.; Murphy, T.; Nicol, T.; Peterson, T.; Pruss, S.; Rameika, G.; Riddiford, A.; Rosenzweig, J.; Russell, A.; Saritepe, S.; Stahl, S.; Strait, J.; Trbojevic, D.; Visnjic, V.; Volk, J.; Johnson, D.; Syphers, M.; Mohl, D.; Ruggiero, S.; Collins, T.

    1990-01-01

    This report summarizes work done before, during, and after the conference. The group was broken down into six subgroups. Subgroup 1 considered collider aspects of the phase 1 and phase 2 upgrade plans. Also considered were the collider aspects of a specific example of Phase 3, namely the replacement of the Tevatron with a new ring providing 1.8 TeV per beam. Subgroup 2 considered specific improvements to the proposed Main Injector (MI) which will enhance the performance of Phase 2. Also considered were improvements which may be made to the present Main Ring (MR) which will enchance performance of Phase 1. Subgroup 3 considered fixed target aspects of the Phase 1 and 2 upgrade plans and a specific example of Phase 3, namely the replacement of the Tevatron with a new ring providing 1.5 TeV fixed target operation. Subgroup 4 considered the external beam lines associated with the upgrades. Subgroup 5 considered the new designs of the superconducting magnets and associated large cryogenic systems connected with the accelerator systems proposed by the other groups. Subgroup 6 assumed the existence of Phase 1 and 2 upgrades and considered new possibilities for Phase 3 such as new accelerators in new tunnels

  17. International technical working group cooperation to counter illicit nuclear trafficking

    International Nuclear Information System (INIS)

    Smith, D.K.; Niemeyer, S.

    2004-01-01

    The Nuclear Smuggling International Technical Working Group (ITWG) is an international group of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking. ITWG members include policy and decision makers, law enforcement personnel, and scientists with expertise in, and responsibility for, nuclear forensics. (author)

  18. Bullying in work groups: the impact of leadership.

    Science.gov (United States)

    Nielsen, Morten Birkeland

    2013-04-01

    The aim of this study is to examine whether and how laissez-faire, transformational, and authentic leadership styles are related to the occurrence of bullying in work groups. It is hypothesized that the investigated leadership styles have direct associations, as well as indirect associations through group cohesion and safety perceptions, with indicators of bullying among subordinates. Using a cross-sectional survey design, the variables were assessed in a randomly selected sample comprising 594 seafarers from two Norwegian shipping companies. Laissez-faire leadership was associated with an increased risk of exposure to bullying behavior, self-labeled victimization from bullying, and perpetrated bullying. Transformational leadership and authentic leadership were related to decreased risk of exposure to bullying behavior. Authentic leadership contributed to the variance in bullying beyond laissez-faire and transformational leadership. Analyses of indirect effects showed that the association between transformational leadership and bullying was fully mediated through safety perceptions, whereas a partial indirect association through safety perceptions was found for authentic leadership. This study makes a significant contribution to the literature by providing evidence for how leadership styles predict workplace bullying. The findings highlight the importance of recruiting, developing, and training leaders who promote both positive psychological capacities and positive perceptions among their subordinates. © 2012 The Author. Scandinavian Journal of Psychology © 2012 The Scandinavian Psychological Associations.

  19. Assessing the Present in Perspective of the Past: Experiences from a Chronicle Workshop on Company-Level Work Disability Management

    Directory of Open Access Journals (Sweden)

    Ulrik Gensby

    2014-05-01

    Full Text Available Participatory approaches to jointly address development and change processes are increasingly applied in Nordic working life research. One approach, the Chronicle Workshop (CW, aims at facilitating collective history through collaborative exploration and joint analysis of organizational development and change processes to guide forthcoming change. This study presents the CW methodology as an interactive research process. The study examines how the CW can facilitate mutual understanding and explanation of sickness absence and return to work efforts in the healthcare workplace, and discuss the extent to which the CW methodology can inform researchers involved in organizational development and change to address some potential limitations that exist. The CW encouraged the expression of diverse perspectives, incorporating insight from different organizational levels, and identified various kinds of resources and dilemmas in mapping the collective history of company-level sickness absence and return to work efforts. More attention to consensus building and power relations, greater explicitness about theoretical groundings, researcher role, and follow-up action ought to be considered prospectively to develop the method further. Inspiration from action research principles and the combined use of critical realism and interactive research may guide future development of the CW methodology.

  20. IFLA General Conference, 1991. Workshops' Papers: Section of Geography and Map Libraries; Section of Art Libraries; Section of Children's Libraries joint with RT of Research in Reading; Children's Literature Documentation Centres (RT); Section of Libraries for the Blind joint with Section of Interlending and Document Delivery; Section of Government Information and Official Publications; Section of Information Technology; Professional Board Working Group on Management. Booklet 9.

    Science.gov (United States)

    International Federation of Library Associations and Institutions, The Hague (Netherlands).

    The 29 papers in this collection were presented at 9 conference workshops: "Inset Maps and Proposals for Their Description" (V. Kusov); "The Utilization of the Old Maps in Modern Researches" (H. Melnikova); (3) "New Series of Maps for Higher Schools: Their Role in the Cartographic Provision for the Higher Education"…

  1. A working plan for working group 2 'enrichment' within the scope of INFCE

    International Nuclear Information System (INIS)

    1977-01-01

    A working plan for INFCE/WG.2 is presented, outlining the major questions which the group needs to answer under the headings: 1. Enrichment needs and supply, 2. Models for cross-investment, 3. Market situation, 4. Technical and economic assessment of the different enrichment technologies, and 5. Safeguards aspects. It is suggested that the group's assessment should include: 1. Future enrichment capacities, 2. Multinational or regional fuel cycle centres, 3. Possible patterns for guarantees of supply, and 4. Special needs of developing countries

  2. NASA Engineering Safety Center NASA Aerospace Flight Battery Systems Working Group 2007 Proactive Task Status

    Science.gov (United States)

    Manzo, Michelle A.

    2007-01-01

    In 2007, the NASA Engineering Safety Center (NESC) chartered the NASA Aerospace Flight Battery Systems Working Group to bring forth and address critical battery-related performance/manufacturing issues for NASA and the aerospace community. A suite of tasks identifying and addressing issues related to Ni-H2 and Li-ion battery chemistries was submitted and selected for implementation. The current NESC funded are: (1) Wet Life of Ni-H2 Batteries (2) Binding Procurement (3) NASA Lithium-Ion Battery Guidelines (3a) Li-Ion Performance Assessment (3b) Li-Ion Guidelines Document (3b-i) Assessment of Applicability of Pouch Cells for Aerospace Missions (3b-ii) High Voltage Risk Assessment (3b-iii) Safe Charge Rates for Li-Ion Cells (4) Availability of Source Material for Li-Ion Cells (5) NASA Aerospace Battery Workshop This presentation provides a brief overview of the tasks in the 2007 plan and serves as an introduction to more detailed discussions on each of the specific tasks.

  3. Working group report on beam plasmas, electronic propulsion, and active experiments using beams

    Science.gov (United States)

    Dawson, J. M.; Eastman, T.; Gabriel, S.; Hawkins, J.; Matossian, J.; Raitt, J.; Reeves, G.; Sasaki, S.; Szuszczewicz, E.; Winkler, J. R.

    1986-01-01

    The JPL Workshop addressed a number of plasma issues that bear on advanced spaceborne technology for the years 2000 and beyond. Primary interest was on the permanently manned space station with a focus on identifying environmentally related issues requiring early clarification by spaceborne plasma experimentation. The Beams Working Group focused on environmentally related threats that platform operations could have on the conduct and integrity of spaceborne beam experiments and vice versa. Considerations were to include particle beams and plumes. For purposes of definition it was agreed that the term particle beams described a directed flow of charged or neutral particles allowing single-particle trajectories to represent the characteristics of the beam and its propagation. On the other hand, the word plume was adopted to describe a multidimensional flow (or expansion) of a plasma or neutral gas cloud. Within the framework of these definitions, experiment categories included: (1) Neutral- and charged-particle beam propagation, with considerations extending to high powers and currents. (2) Evolution and dynamics of naturally occurring and man-made plasma and neutral gas clouds. In both categories, scientific interest focused on interactions with the ambient geoplasma and the evolution of particle densities, energy distribution functions, waves, and fields.

  4. The Community Earth System Model-Polar Climate Working Group and the status of CESM2.

    Science.gov (United States)

    Bailey, D. A.; Holland, M. M.; DuVivier, A. K.

    2017-12-01

    The Polar Climate Working Group (PCWG) is a consortium of scientists who are interested in modeling and understanding the climate in the Arctic and the Antarctic, and how polar climate processes interact with and influence climate at lower latitudes. Our members come from universities and laboratories, and our interests span all elements of polar climate, from the ocean depths to the top of the atmosphere. In addition to conducting scientific modeling experiments, we are charged with contributing to the development and maintenance of the state-of-the-art sea ice model component (CICE) used in the Community Earth System Model (CESM). A recent priority for the PCWG has been to come up with innovative ways to bring the observational and modeling communities together. This will allow for more robust validation of climate model simulations, the development and implementation of more physically-based model parameterizations, improved data assimilation capabilities, and the better use of models to design and implement field experiments. These have been informed by topical workshops and scientific visitors that we have hosted in these areas. These activities will be discussed and information on how the better integration of observations and models has influenced the new version of the CESM, which is due to be released in late 2017, will be provided. Additionally, we will address how enhanced interactions with the observational community will contribute to model developments and validation moving forward.

  5. Final report of the tritium issues working group. Vol. 2

    International Nuclear Information System (INIS)

    Spratt, Peter; Hardy, David; Peirce, Denny; Smith, Ron; Wyatt, Alan.

    1985-09-01

    This report consists of a series of appendices relating to the sociological and technical considerations of tritium and its related technology. It is intended as a supplement to Volume 1 of the Final Report of the Tritium Issues Working Group. The work will the cover the following specific areas: A) Development of an ethical framework related to technology, morality, weapons, politics, etc. B) Review the history of nuclear power in Canada, placement of this technology in context with other technologies, waste products and the CANDU reactor system. C) Assessment of tritium as a unique product, as a class of isotopes, waste by-product and physical properties, effects on human life and its place in the natural environment. D) Assessment of tritium and the environment, diffusion through commerical application, European and American experience, waste management and recycling. E) Assessment of commercial applications, including current experience, historical applications for commercial purposes, offshore revenue for Canada value-added component and role of Ontario Hydro. F) Assessment of tritium and weapons, including technology and the military, past and future role of tritium in weapons, proliferation theories, generic conclusions regarding linkages, dependence of Americans on foreign sources of strategic resources. G) Review of regulations in effect now with respect to nuclear and/or other products with potential to military application, and what is needed. H) Review of traditional Canadian postures in the area of technology perception and political culture, the role, mandate and responsibility of Ontario Hydro, growth of international economy, Canada's competitive position in this economy and the challenges and dilemmas that modern decision makers have in a highly interrelated technological world

  6. Final report of the tritium issues working group. Vol. 1

    International Nuclear Information System (INIS)

    Spratt, Peter; Hardy, David; Peirce, Denny; Smith, Ron; Wyatt, Alan.

    1985-09-01

    Early in 1985 the proposed sale of the isotope 'tritium' by Ontario Hydro became a public issue. A number of community groups claimed in public forum that tritium recovered from Ontario Hydro's nuclear reactors would be sold or diverted to American thermonuclear (fusion) weapons. Their position was based on the following presumptions: that tritium was a major component in American nuclear weapons, that the United States has a supply problem with or shortage of this material, and that Ontario Hydro would directly or indirectly support the American nuclear weapons program: a) by providing tritium directly to the U.S. Department of Energy for use in nuclear weapons, or b) by supplying tritium to certain buyers - either traditional commercial facilities or the developing fusion research agencies associated with the Department of Energy, thus allowing or making possible the diversion of this isotope to nuclear weapons purposes, or c) by answering the needs of the commercial market, at present supplied from production reactors dedicated to supplying U.S. military requirements, indirectly allowing the U.S. government to concentrate its efforts on the production of tritium for nuclear weapons. When members of what has become known as the 'Tritium Issues Working Group' were first approached by Dr. T.S. Drolet in mid-April 1985, we were asked if we would agree to participate in a study to assess whether Canadian tritium, which is to be produced only for commercial and research purposes, could be inadvertantly utilized, either directly or indirectly, in the American nuclear weapons program. Our discussion of these issues is covered in Volume 1 of this report and is supplemented by appropriate Appendices in Volume 2. We could find absolutely nothing of a factual nature to justify the hypothesis that Canadian tritium would find its way into the American weapons program

  7. The Impact of Instructor's Group Management Strategies on Students' Attitudes to Group Work and Generic Skill Development

    Science.gov (United States)

    Natoli, Riccardo; Jackling, Beverley; Seelanatha, Lalith

    2014-01-01

    This paper examines the influence of two distinct group work management strategies on finance students' attitudes towards group work and their perceptions of generic skill development. Using quantitative and qualitative data, comparisons are made between students who experienced a supportive group work environment and students who experienced an…

  8. Effectiveness of a ‘Workshop on Decluttering and Organising’ programme for teens and middle-aged adults with difficulty decluttering: a study protocol of an open-label, randomised, parallel-group, superiority trial in Japan

    Science.gov (United States)

    Aso, Yasuko; Yamaoka, Kazue; Nemoto, Asuka; Naganuma, Yuki; Saito, Masashige

    2017-01-01

    Introduction Hoarding disorder can cause problems with work performance, personal hygiene, health and well-being. The disorder is a growing social problem in Japan. Having difficulty discarding rubbish, decluttering and organising can signal a future hoarding disorder, and early intervention is important. We developed an educational workshop on decluttering and organising for teens and adults with difficulty organising. The objective of this study is to evaluate the effectiveness of a workshop for reducing clutter and improving quality of life among younger people with difficulty decluttering and organising. Methods and analysis An open-label, parallel-group, randomised controlled trial will be conducted among volunteers aged 12–55 years with mild difficulty decluttering and organising. Those in the intervention group will attend the workshop and receive a visit from a professional cleaning company to declutter their living space. The control group will have only the latter. The primary outcome will be the score on the Japanese version of the Saving Inventory-Revised. Secondary outcomes will be scores on the Clutter Image Rating Scale, the Japanese version of the Rosenberg Self-Esteem Scale and the Roles of Private Space Scale. The results will be examined for differences between the two groups in changes from baseline to 7 months. We will examine crude effects and adjust for gender and age using a general linear model for continuous variables and a logistic regression model for dichotomous variables. Sample size was calculated assuming a significance level of 5% (two tailed), a power of 80% and an effect size of 0.75. In total, 60 subjects (30 in each group) will be required. Ethics and dissemination The study protocol has been approved by the Medical Ethical Committee of Teikyo University (No. 15-065). The findings will be disseminated widely through peer-reviewed publication and conference presentations. Trial registration number UMIN000020568. Issue date: 16

  9. Patterns of authorship in the IPCC Working Group III report

    Science.gov (United States)

    Corbera, Esteve; Calvet-Mir, Laura; Hughes, Hannah; Paterson, Matthew

    2016-01-01

    The Intergovernmental Panel on Climate Change (IPCC) has completed its Fifth Assessment Report (AR5). Here, we explore the social scientific networks informing Working Group III (WGIII) assessment of mitigation for the AR5. Identifying authors’ institutional pathways, we highlight the persistence and extent of North-South inequalities in the authorship of the report, revealing the dominance of US and UK institutions as training sites for WGIII authors. Examining patterns of co-authorship between WGIII authors, we identify the unevenness in co-authoring relations, with a small number of authors co-writing regularly and indicative of an epistemic community’s influence over the IPCC’s definition of mitigation. These co-authoring networks follow regional patterns, with significant EU-BRICS collaboration and authors from the US relatively insular. From a disciplinary perspective, economists, engineers, physicists and natural scientists remain central to the process, with insignificant participation of scholars from the humanities. The shared training and career paths made apparent through our analysis suggest that the idea that broader geographic participation may lead to a wider range of viewpoints and cultural understandings of climate change mitigation may not be as sound as previously thought.

  10. Energy-environment-development interactions. Report on working group 6

    International Nuclear Information System (INIS)

    1997-01-01

    Natural resources, including strategic resources as oil or fresh water, have been the cause of disputes and wars among nations. Natural resources have also been catalyzers of conflicts and objectives of military actions. In last decades, new potential sources of conflict have emerged, as high geographical concentration of fossil duels, acceleration of the depletion and pollution of otherwise renewable resources, and the increase of resource scarcity because of higher demands from population growth and larger consumption per capita. The potential change of climate threatens to become an important source of international tensions in the near future and to provoke the scarcity of vital resources in particular regions. If the world is to engage in a true process of sustainable development, radical changes in the present strategies and patterns of resources use are needed. This working group focused on the problems and potential solutions related to renewable energy sources. The topic of water and security were discussed as well as multilateral agreements and negotiations regarding global climate change

  11. National logistics working groups: A landscape analysis study.

    Science.gov (United States)

    Leab, Dorothy; Schreiber, Benjamin; Kasonde, Musonda; Bessat, Olivia; Bui, Son; Loisel, Carine

    2017-04-19

    Several countries have acknowledged the contributions made by national logistics working groups (NLWG) to ensure equitable access to the expanded program on immunization's (EPI) vaccines against preventable diseases. In order to provide key insights to the United Nations Children's Fund (UNICEF) and the World Health Organization (WHO) supply chain hub - as well as other players, including national EPI - a landscape analysis study was conducted from September 2015 to February 2016. This is a cross-sectional survey taken by 43 countries that combines qualitative and quantitative approaches. Data was collected through a desk review, consultation, interviews, and distance questioning. References and guidance were used to determine and specify the underlying mechanisms of NLWGs. The key findings are:This study has provided a general overview of the status of NLWGs for immunization in various countries. Based on the key insights of the study, technical assistance needs have been identified, and immunization partners will be required to help countries create and reinforce their NLWGs. Copyright © 2017. Published by Elsevier Ltd.

  12. Chemical Safety Vulnerability Working Group report. Volume 2

    International Nuclear Information System (INIS)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 2 consists of seven appendices containing the following: Tasking memorandums; Project plan for the CSV Review; Field verification guide for the CSV Review; Field verification report, Lawrence Livermore National Lab.; Field verification report, Oak Ridge Reservation; Field verification report, Savannah River Site; and the Field verification report, Hanford Site

  13. Free electron laser and coherent radiation. Working group summary

    International Nuclear Information System (INIS)

    Gover, A.; Csonka, P.; Deacon, D.

    1984-01-01

    The planned development of a new storage ring at SSRL gives hope for the exciting possibility that an x-ray laser may become available in a users facility. Such a device would certainly be a unique and revolutionary tool for scientific research and industrial applications, which may take advantage of the spatial and temporal coherence, high power and high brightness of this device in a wavelength regime where no alternative coherent radiation sources exist. The feasibility of implementing such a device in the new ring should be examined carefully by the ring designers. If conclusions are positive, the ring design should take into account the special requirements which are set by the x-ray laser design parameters. Our working group made the first step in this examination process. Most of the emphasis was put on the consideration of an X-Ray Free Electron Laser (XR FEL). FEL technology has developed in the last few years and was recently demonstrated to operate successfully in the visible wavelength regime in the ACO storage ring in Orsay

  14. Chemical Safety Vulnerability Working Group report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 2 consists of seven appendices containing the following: Tasking memorandums; Project plan for the CSV Review; Field verification guide for the CSV Review; Field verification report, Lawrence Livermore National Lab.; Field verification report, Oak Ridge Reservation; Field verification report, Savannah River Site; and the Field verification report, Hanford Site.

  15. The Halden Reactor Project workshop meeting on control room development

    International Nuclear Information System (INIS)

    Miberg, Ann Britt; Green, Marie; Haukenes, Hanne; Larsen, Marit; Seim, Lars Aage; Veland, Oeystein

    1999-03-01

    The 'Control Room Development' workshop was organised in. Halden, November 5-6, 1998. The purpose of the workshop was to bring forward recommendations for the future use of HAMMLAB with respect to control room development. The workshop comprised thirteen presentations summarising current issues and status in control room development projects and related projects. Following the presentations, five working groups were formed. The purpose of the working groups was to establish a set of recommendations for the future use of HAMMLAB. Each working group developed a set of recommendations. The outcomes of the working groups' discussions were summarised in plenum by the working group chairs. During the workshop, all participants excluding the Halden Project staff were asked to fill in a questionnaire indicating which research topics they found most interesting to pursue in future HAMMLAB research. The purpose of this report is to summarise the workshop participants' presentations, the working groups' discussions, and the recommendations given by the workshop participants concerning the future use of HAMMLAB (author) (ml)

  16. Working group report on wetlands, wildlife and fisheries

    International Nuclear Information System (INIS)

    Maltby, L.

    1990-01-01

    A workshop was held to discuss the impacts of climatic change on wetlands, wildlife and fisheries. Impacts that could occur as a result of climatic change include: sea level rise affecting coastal wetlands by inundation, erosion and saltwater intrusion; temperature rise/moisture balance changes on other wetlands; lake level changes affecting shoreline wetlands; vegetation species/community modification of biological systems; and changes in values derived from wetlands impacting socio-economic systems. The Great Lakes shoreline is considered to be at high risk, and it is predicted that there will be profound effects on the ecological and socio-economic value of the Great Lakes wetlands. Presentations were given on wildlife as biological indicators, modelling the effects of climate warming on the stream habitats of brook trout, and the effects of an altered water regime on Great Lakes coastal wetlands. It was concluded that a fundamental research program of an interdisciplinary nature be established to determine current linkages of climatic variables to the function, distribution and productivity of wetlands and associated fish and wildlife resources. A national wetlands monitoring network should be established to trace the influence of climatic variables on wetlands and fish, to identify environmental indicators for reporting and to complement other monitoring programs

  17. The Beyond the standard model working group: Summary report

    Energy Technology Data Exchange (ETDEWEB)

    G. Azuelos et al.

    2004-03-18

    In this working group we have investigated a number of aspects of searches for new physics beyond the Standard Model (SM) at the running or planned TeV-scale colliders. For the most part, we have considered hadron colliders, as they will define particle physics at the energy frontier for the next ten years at least. The variety of models for Beyond the Standard Model (BSM) physics has grown immensely. It is clear that only future experiments can provide the needed direction to clarify the correct theory. Thus, our focus has been on exploring the extent to which hadron colliders can discover and study BSM physics in various models. We have placed special emphasis on scenarios in which the new signal might be difficult to find or of a very unexpected nature. For example, in the context of supersymmetry (SUSY), we have considered: how to make fully precise predictions for the Higgs bosons as well as the superparticles of the Minimal Supersymmetric Standard Model (MSSM) (parts III and IV); MSSM scenarios in which most or all SUSY particles have rather large masses (parts V and VI); the ability to sort out the many parameters of the MSSM using a variety of signals and study channels (part VII); whether the no-lose theorem for MSSM Higgs discovery can be extended to the next-to-minimal Supersymmetric Standard Model (NMSSM) in which an additional singlet superfield is added to the minimal collection of superfields, potentially providing a natural explanation of the electroweak value of the parameter {micro} (part VIII); sorting out the effects of CP violation using Higgs plus squark associate production (part IX); the impact of lepton flavor violation of various kinds (part X); experimental possibilities for the gravitino and its sgoldstino partner (part XI); what the implications for SUSY would be if the NuTeV signal for di-muon events were interpreted as a sign of R-parity violation (part XII). Our other main focus was on the phenomenological implications of extra

  18. Conclusions from the engineering subgroup of the SSC liquid argon calorimeter working group

    International Nuclear Information System (INIS)

    Bederede, D.; Cooper, W.; Mulholland, G.; Kroon, P.; Guryn, W.; Lobkowicz, F.; Mason, I.; Pohlen, J.; Schindler, R.H.; Scholle, E.A.; Watanabe, Y.; Watt, R.

    1990-01-01

    The SSC Calorimeter Workshop was organized to explore the feasibility of each calorimeter technology for use in a 4π detector at the SSC. The Liquid Argon Calorimeter group further subdivided into four subgroups; Hermeticity, Engineering, Module Details, and Electronics. This is the report of the Engineering Subgroup whose charge was to evaluate the cost, schedule, manpower, safety, and facilities requirements for the construction of a large liquid argon calorimeter for the SSC

  19. Natural-orifice transluminal endoscopic surgery (NOTES) in Europe: summary of the working group reports of the Euro-NOTES meeting 2010

    DEFF Research Database (Denmark)

    Meining, A; Feussner, H; Swain, P

    2011-01-01

    The fourth Euro-NOTES workshop took place in September 2010 and focused on enabling intensive scientific dialogue and interaction between participants to discuss the state of the practice and development of natural-orifice transluminal endoscopic surgery (NOTES) in Europe. Five working groups were...... collaboration and indications, robotics and platforms, and matters related to training and education. This review summarizes consensus statements of the working groups to give an overview of what has been achieved so far and what might be relevant for research related to NOTES in the near future....

  20. Burgundy SRCAE - Renewable energies. Working paper - April 2011, Report of the first workshop, Wednesday, May 11, 2011. Report of the 2nd workshop, Wednesday, June 15, 2011

    International Nuclear Information System (INIS)

    2011-04-01

    A first document proposes a synthesis of renewable energy production in Burgundy, and an assessment of resources and of the theoretical available resource per energy source. A first part proposes a general overview of energetic issues in the region (energy consumption, greenhouse gas emissions, air quality, evolutions of energy consumption per sector), an assessment of renewable energy productions in France and in the region. Assessments of maximum theoretical potentials are then presented, with more detailed discussions for each source: biomass valorisation (wood, biogas, energetic crops, with discussions about impacts), waste valorisation, aero-thermal and geothermal energy, solar thermal energy, solar photovoltaic energy, wind energy, and hydroelectricity. Two documents then report workshops on renewable energies. These workshops were an opportunity for remarks and questions on diagnosis and global scenarios, on issues specific to biomass individual projects, to biomass collective projects (medium powers), and to biomass industrial projects, and on development scenarios and objectives for the different renewable energies (methanization, wind energy, and so on)