WorldWideScience

Sample records for windy iec class

  1. Two Rebt Therapists and One Client: Windy Dryden Transcript

    OpenAIRE

    Dryden, Windy

    2010-01-01

    In the summer of 1994, two of the most published authors in the field of Rational Emotive Behavior Therapy (REBT), Albert Ellis and Windy Dryden, each saw the same client. The transcript of Windy Dryden is presented with slight modifications to protect the confidentiality of the client and those in the client’s life.

  2. Developing IEC prototypes for adolescents. IEC workshop.

    Science.gov (United States)

    1997-01-01

    Participants of the IEC Workshop for the Production of OHP Material on Reproductive Health for Adolescents and Young Adults held November 25-30 in Japan developed innovative, visually appealing overhead projector (OHP) transparencies to serve as prototype information, education, and communication (IEC) materials for the Asian Region. The materials cover a wide range of topics from early marriage to unwanted pregnancy. This paper briefly describes the prototypes. One group focused upon early marriage, an issue of considerable importance to the health and welfare of young women in countries such as Bhutan, India, and Nepal. Participants from China, Laos, Malaysia, and Thailand focused upon the issue of gender equality, while a third group developed OHP material to teach a range of issues related to young people's sexual and reproductive health. Finally, the fourth group, drawn from Indonesia, the Philippines, and Vietnam, focused upon the topic of menstruation with a prototype targeted to boys and girls aged 9-14 years. Boys were included to foster their understanding of menstruation as a natural phenomenon.

  3. 2015 Big Windy, Oregon 4-Band 8 Bit Imagery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data are LiDAR orthorectified aerial photographs (8-bit GeoTIFF format) within the Oregon Lidar Consortium Big Windy project area. The imagery coverage is...

  4. Management training for IEC.

    Science.gov (United States)

    Bhatia, B; Mathur, K B

    1987-06-01

    Communication plays an essential role in creating the necessary social climate for the development and adoption of population policies and in supporting actions undertaken to implement these policies. To be effective, however, there must be integrated communication for population and development programs. In addition to knowledge of the mass media and community organizations, communicators in the field of population must have the ability to collaborate with other development programs in an intersectoral effort, Toward this end, UNESCO, in collaboration with the Asia-Pacific Institute for broadcasting Development, has organized specialized courses in the management of population communication programs. A review of the situation at the time this program was initiated revealed that IEC directors had minimal knowledge and understanding of the role of IEC in family planning programs, little practical experience in planning and managing multimedia, community-based, interpersonal communication activities, and these programs had no scientifically established data base. As result, a pilot 2-week course comprised of o modules was held in India in 1983. Module 1 focused on a systematic problem-solving approach to IEC program situations, Module ii emphasized human resource management, and Module III was designed to impart specific communication skills. The course was subsequently expanded to 3 weeks, and has in the past 3 years involved 54 persons from 20 countries. Unesco has also developed a population communication course in collaboration with the Arab States Broadcasting Union.

  5. IEC 61850 and IEC 62351 Cyber Security Acceleration Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Clements, Samuel L.; Edgar, Thomas W.; Manz, David O.

    2012-04-01

    The purpose of this workshop was to identify and discuss concerns with the use and adoption of IEC 62351 security standard for IEC 61850 compliant control system products. The industry participants discussed performance, interoperability, adoption, challenges, business cases, and future issues.

  6. IEC 61850 Industrial Communication Standards under Test

    CERN Document Server

    Tilaro, F M; Gonzalez-Berges, M

    2014-01-01

    IEC-61850, as part of the International Electrotechnical Commission's (IEC) Technical Committee 57 (TC57), defines an international and standardized methodology to design electric power automation substations.

  7. 76 FR 74074 - Final Environmental Impact Statement for the Windy Gap Firming Project, Colorado

    Science.gov (United States)

    2011-11-30

    ... deliver Windy Gap water to Colorado's Front Range community participants in all years. The purpose of the... to 2005, Windy Gap diverted an average annual 11,080 AF of water per year. However, demands among the... Windy Gap Firming Project, Colorado AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of...

  8. Inertial Electrostatic Confinement (IEC) devices

    International Nuclear Information System (INIS)

    Nebel, R.A.; Turner, L.; Tiouririne, T.N.; Barnes, D.C.; Nystrom, W.D.; Bussard, R.W.; Miley, G.H.; Javedani, J.; Yamamoto, Y.

    1994-01-01

    Inertial Electrostatic Confinement (IEC) is one of the earliest plasma confinement concepts, having first been suggested by P. T. Farnsworth in the 1950s. The concept involves a simple apparatus of concentric spherical electrostatic grids or a combination of grids and magnetic fields. An electrostatic structure is formed from the confluence of electron or ion beams. Gridded IEC systems have demonstrated neutron yields as high as 2 * 10 10 neutrons/sec. These systems have considerable potential as small, inexpensive, portable neutron sources for assaying applications. Neutron tomography is also a potential application. Atomic physics effects strongly influence the performance of all of these systems. Important atomic effects include elastic scattering, ionization, excitation, and charge exchange. This paper discusses how an IEC system is influenced by these effects and how to design around them. Theoretical modeling and experimental results are presented

  9. IEC-based Hearing Aids Fitting

    OpenAIRE

    Hideyuki, Takagi; 高木, 英行; Ohsaki, Miho; Osaki, Miho

    1999-01-01

    We propose a hearing aid fitting method based on an interactive evolutionary computation (IEC). First, we identify the problems with current hearing aid fitting methods and propose an IEC fitting method to improve the fitting process with completely different approach from that of conventional fitting methods. Then, we design an experimental hearing aid system and evaluate the IEC fitting method. Using speech and music sources, we show that our proposed IEC fitting method outperforms conventi...

  10. Effective IEC approaches for Asia. IEC evaluation workshop.

    Science.gov (United States)

    1996-02-01

    The UNFPA-supported project on development and distribution of information, education, and communication (IEC) materials in support of improving women's health and status was evaluated at a workshop held in Tokyo in December 13-15, 1995. The 1992-95 cycle of the project was analyzed by experts from Bangladesh, China, India, Indonesia, Malaysia, Nepal, the Philippines, and Vietnam plus three experts from the UNFPA/Country Support Team. The workshop also made it possible for the experts to identify needs as well as effective utilization of existing IEC materials. It was suggested that a nongovernmental organization be established for the distribution and effective use of these materials. The workshop mostly reviewed the print and audiovisual materials. Videos were also evaluated. The materials were found useful for the targeted region. Among other subregional issues it was noted that youth needs were inadequately addressed as they related to sexually transmitted diseases (STDs), unwanted pregnancy, risk of maternal mortality and morbidity, low birth weight, and premature birth. Although the women of the region comprise one-third of the world's population, 70% of the global annual maternal mortality of 500,000 occurs in the subregion. IEC materials should also target adolescents and their support groups. Other needs were also outlined: the expansion of educational opportunities for women, the promotion of employment, the involvement of men, and the training of personnel. The strategies used in the cycle helped strengthen self-reliance through information and experience sharing. The focus on women should be continued with more attention paid to adolescents and young adults, including males. Women's health issues should be expanded to include menopause, reproductive tract infections, STDs, HIV/AIDS prevention, and legal rights including abortion. The production of IEC materials should be identified through research and analysis of existing materials, focus group

  11. IEC Newsletter, No. 49, Third Quarter 2014

    International Nuclear Information System (INIS)

    2014-12-01

    The IEC Newsletter is prepared by the Incident and Emergency Centre (IEC), Department of Nuclear Safety and Security of the IAEA. The Incident and Emergency Centre (IEC) is the global focal point for emergency preparedness and response for nuclear and radiological safety or security related incidents, emergencies, threats or events of media interest. The IEC is also the world’s centre for coordination of international assistance in emergency. Table of contents: • Spolighting IEC Activities at the 58th IAEA General Conference; • TM on Lessons Learned from Past Emergency Preparedness Review (EPREV) Missions; • Third Full Response Exercise of 2014; • Israel joins RANET; • Launch of Emergency Preparedness Network (EPnet); • IEC Response to Recent Events; Member State Prepaedness; • New Publications Translation; • New USIE Training Video; • The IEC in Numbers

  12. IEC Newsletter, No. 53/3 (2015)

    International Nuclear Information System (INIS)

    2015-12-01

    The IEC Newsletter is prepared by the Incident and Emergency Centre (IEC), Department of Nuclear Safety and Security of the IAEA. The Incident and Emergency Centre (IEC) is the global focal point for emergency preparedness and response for nuclear and radiological safety or security related incidents, emergencies, threats or events of media interest. The IEC is also the world’s centre for coordination of international assistance in emergency. The following topics are presented in this newsletter: Prepared to Respond International Conference on Global EPR; Launch of EPRIMS; First meeting of EPR Standards Committee; IEC and French experts test assessment and prognosis arrangements; IEC and Swiss counterparts conduct an assessment and prognosis drill; Consultancy on CANDUspecific EALs; Regional Workshops; Recently reported events; Member State preparedness; IEC welcomes young visitors on Bring Your Children to Work day

  13. Impact Of IEC Intervention On Knowledge Regarding AIDS Amongst Senior Secondary School Children Of East Delhi

    Directory of Open Access Journals (Sweden)

    Bhasin S. K

    1999-01-01

    Full Text Available Research questions: 1. What is the level of awareness regarding HIV/AIDS amongst school children in East Delhi? 2. What is the impact of IEC intervention on the level of awareness regarding HIV/AIDS in these children? Objective: To find out the impact of IEC intervention on awareness regarding HIV/AIDS amongst senior secondary boys and girls in schools of East Delhi. Study design: Pre and post IEC interventional study. Settings: In four randomly selected senior secondary schools in East Delhi. Participants: 294 boys and 333 girls of class XI and XII in pre IEC group and 239 boys and 203 girls in post IEC group. Intervention: An IEC package of exhibition of posters, videotapes and intra group open discussion. Outcome variables: Proportion (prevalence of school children having correct knowledge of various aspects of HIV/AIDS after IEC intervention. Statistical analysis: Chi-square test. Results: IEC intervention significantly generated an enhancing effect on most aspects of their awareness towards HIV/AIDS among both boys and girls. Conclusions: There is an urgent need to impart health education for dispelling misconceptions regarding this disease.

  14. From IEC 61131 to IEC 61499 for Distributed Systems: A Case Study

    Directory of Open Access Journals (Sweden)

    Christian Gerber

    2008-02-01

    Full Text Available A new concept for distributed control systems based on the new IEC 61499 standard is tested in this work in cooperation with LAE Engineering GmbH, a medium-sized company. Based on a catalogue of requirements, a customer-related testbed is developed. In the following this testbed is used as a reference to realise an IEC 61499 compliant-distributed control system based on PC technics. By doing this, rules are defined to convert user-owned IEC 61131 function blocks to IEC 61499 compliant function blocks. Concluding, some trends for IEC 61499-based distributed control systems will be summarised.

  15. IEC Newsletter, No. 50, Fourth Quarter, 2014

    International Nuclear Information System (INIS)

    2014-12-01

    The IEC Newsletter is prepared by the Incident and Emergency Centre (IEC), Department of Nuclear Safety and Security of the IAEA. The Incident and Emergency Centre (… IEC) is the global focal point for emergency preparedness and response for nuclear and radiological safety or security related incidents, emergencies, threats or events of media interest. The IEC is also the world’s centre for coordination of international assistance in emergency. The following topics are presented in this newsletter: Three Workshops at the Fukushima RANET Capacity Building Centre; Belgium joins RANET; IEC Response to Recent Events; Recent Exercises; Israel conducts National Response Exercise at Soreq; IACRNE: 24th Regular Meeting; Safety Requirements on Emergency Preparedness and Response; NIRS 2014 Workshop on Radiation Emergency Medicine; Member State Preparedness; New Publications and Translations and Forthcoming Events

  16. 2015 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar: Big Windy

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Quantum Spatial collected Light Detection and Ranging (LiDAR) data for the Oregon LiDAR Consortium (OLC) Big Windy 2015 study area. This study area is located near...

  17. 2013 Oregon Department of Geology and Mineral Industries (DOGAMI) Oregon Lidar: Big Windy

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In July of 2013, lightning strikes ignited three wildfires in southwest Oregon that became known as the Big Windy Complex. The fires were fully contained by the end...

  18. A multi-function IEC 61850 packet generator based on FPGA

    Science.gov (United States)

    Wei, Wei; Li, Hong-bin; Cheng, Han-miao

    2016-07-01

    An IEC 61850 packet generator is used to produce IEC 61850-9-2 packets by simulating the merging unit and testing the IEC 61850 digital device. While the existing IEC packet generator can produce ideal digital without any noise, it does not take into account the fact that the merging unit output signal packets will be inevitably superimposed with noise. Since the International Electrical Commission standard of the electronic current transformer specifies the minimum output signal-to-noise ratio of the merging unit to be 30 dB, and the signal superimposed with noise will influence the operation performance of the digital device, it is necessary to design a multi-function IEC 61850-9-2 packet generator for a digital device test. Therefore, in this paper, a multi-function IEC 61850 packet generator has been developed, which not only can output various IEC 61850-9-2 packets, but also can add white Gaussian noise to the signal for digital device testing. By testing three digital electricity meters from different manufacturers, we showed that the error of the digital electricity meter is significantly larger when the signal packet is superimposed with noise. Also when the signal-to-noise ration is 30 dB, the error of one of the meters exceeds the allowed range of the accuracy class. This indicates that the noise testing and the noise setting function of the system has an important role in the testing of a digital device.

  19. A multi-function IEC 61850 packet generator based on FPGA

    International Nuclear Information System (INIS)

    Wei, Wei; Li, Hong-bin; Cheng, Han-miao

    2016-01-01

    An IEC 61850 packet generator is used to produce IEC 61850-9-2 packets by simulating the merging unit and testing the IEC 61850 digital device. While the existing IEC packet generator can produce ideal digital without any noise, it does not take into account the fact that the merging unit output signal packets will be inevitably superimposed with noise. Since the International Electrical Commission standard of the electronic current transformer specifies the minimum output signal-to-noise ratio of the merging unit to be 30 dB, and the signal superimposed with noise will influence the operation performance of the digital device, it is necessary to design a multi-function IEC 61850-9-2 packet generator for a digital device test. Therefore, in this paper, a multi-function IEC 61850 packet generator has been developed, which not only can output various IEC 61850-9-2 packets, but also can add white Gaussian noise to the signal for digital device testing. By testing three digital electricity meters from different manufacturers, we showed that the error of the digital electricity meter is significantly larger when the signal packet is superimposed with noise. Also when the signal-to-noise ration is 30 dB, the error of one of the meters exceeds the allowed range of the accuracy class. This indicates that the noise testing and the noise setting function of the system has an important role in the testing of a digital device. (paper)

  20. Power system EMC and IEC publication 1000

    International Nuclear Information System (INIS)

    Teichmann, H.

    1997-01-01

    A classification of the principal phenomena causing electromagnetic disturbances has been prepared by the International Electrotechnical Commission (IEC). Electromagnetic compatibility was defined (by the IEC) as 'the ability of a device, equipment or system to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances in that environment'. The classification includes the following phenomena relative to power systems: (1) low-frequency phenomena, (2) radiated low-frequency phenomena, (2) conducted high-frequency phenomena, (3) radiated high-frequency phenomena, and (4) electrostatic discharge phenomena. The structure of the IEC publication 1000 was explained. Parts 1, 2, 3 and 6 of the publication were highlighted. The issues covered in those parts were: (Part 1) general, (Part 2) environment, (Part 3) limits, and (Part 6) generic standards. 6 refs

  1. Developing IEC strategies for population programmes.

    Science.gov (United States)

    Cohen, S I

    1993-01-01

    The thrust of this article is to define terms of IEC, IEC strategies, the stepwise planning process for IEC, data requirements, the ideational change process, and the need for situational and institutional analysis. A chart provided an at-a-glance perspective on the 11 steps in IEC strategic planning for as many specific target groups as needed. The steps are to state the goals, select and prioritize the target audience, describe the target audience,, determine the IEC activities, outline appropriate messages, identify communication channels, identify managerial and organizational strategies, calculate the amount of resources required, identify a realistic time frame, and evaluate critical factors and obstacles. IEC goals are to contribute to solving a problem or supporting an issue, which involved attitudinal and/or behavioral changes. Many strategies are possible. The common weaknesses are the lack of priorities, the view of targets as a mass audience, a lack in support for population strategies, a lack of integration with family planning or specific population sectors, a lack of integration of up-to-data research findings on population programs, vague or difficult-to-measure objectives, reliance on printed media, and sporadic assessment of personnel needs. THe levels of strategy are identified as follows: 1) national and multisectoral, 2) national and sectoral specific, and 3) project specific. Traditional sociocultural research and KAP surveys are not sufficient to provide an understanding of the target audience. There must be an understanding of the stages of individual change: unaware, aware, concerned, information seeking, learning, motivated to change, initial behavior change, sustained behavior change, and adoption or refusal of behavior change. Beliefs must be distinguished from attitudes in measurement. Changes in beliefs may involve correction of misinformation; attitude change requires a motivational approach. Behavior may be determined by other

  2. Implementing service quality based on ISO/IEC 20000 a management guide

    CERN Document Server

    Kunas, Michael

    2012-01-01

    Potential customers will look for suppliers with ISO/IEC 20000 certification, seeking the reassurance it provides. This book will guide you through implementation and certification. Your streamlined management processes will enable you to offer first-class customer service at competitive prices. The impact on your profit margins is clear!

  3. IEC Newsletter, No. 52/2 (2015)

    International Nuclear Information System (INIS)

    2015-10-01

    The IEC Newsletter is prepared by the Incident and Emergency Centre (IEC), Department of Nuclear Safety and Security of the IAEA. The Incident and Emergency Centre (IEC) is the global focal point for emergency preparedness and response for nuclear and radiological safety or security related incidents, emergencies, threats or events of media interest. The IEC is also the world’s centre for coordination of international assistance in emergency. The following topics are presented in this newsletter: Peer Review of UAE’s Emergency Plans for Barakah NPP; IEM 9: Assessment and Prognosis in Response to a Nuclear or Radiological Emergency; Tabletop exercise simulating marime transport emergency; Establishment of EPR Standards Committee; Annual ConvEx-1c; Advisory Mission to Kuwait on medical aspects of EPR; EPR self-assessment for Arab Member States; Event at Cattenom NPP; Train the Trainers Workshop for first responders in Vienna; Member States Preparedness; Republic of Korea joins RANET — USA registers new capabilities; Workshop on Emergency Radiation Monitoring; #EPR15: International Conference on Global EPR; Recent Events

  4. Interpretation of MS ISO/ IEC 17020

    International Nuclear Information System (INIS)

    Mohamad Pauzi Ismail

    2012-01-01

    MS ISO/ IEC 17020 is an international standard which adopted by Malaysian Standard states the requirement criteria for inspection bodies. The author involved in the NDT technical assessment to several NDT companies in Malaysia. The experience in performing NDT assessment activity is explained and discussed. (author)

  5. Effectiveness of Information, Education and Communication (IEC) on ...

    African Journals Online (AJOL)

    IEC) on the public acceptability of unsafe abortion solution options of contraception, family life education including sex education and liberalization of abortion laws. Our aim was to use IEC to improve public acceptability of the recommended ...

  6. IEC 61850 – for much more than substations

    OpenAIRE

    Etherden, Nicholas; Öhlen, Carl

    2010-01-01

    IEC61850 is a standardized concept for information handling and communication for power utility automation. It is NOT just another protocol. IEC 61850 is today being expanded to apply to many domains beyond the original scope of the substation. Figure 1 illustrates the Expansion of IEC 61850 world to both control centre communication and modelling of communication with renewable energy resources.

  7. IEC 61850: integrating substation automation into the power plant control system; IEC 61850: Integration der Schaltanlagenautomatisierung in die Kraftwerksleittechnik

    Energy Technology Data Exchange (ETDEWEB)

    Orth, J. [ABB AG, Mannheim (Germany)

    2008-07-01

    The new communication standard IEC 61850 has been developed in the substation automation domain and was released 2004 as a worldwide standard. Meanwhile IEC 61850 is already established in many substation automation markets. The paper discusses the implementation of IEC 61850 integrating process control and substation automation into one consistent system in a power plant. (orig.)

  8. Progress in IEC 61400-27

    DEFF Research Database (Denmark)

    Sørensen, Poul Ejnar; Andresen, Björn; Bech, John

    2012-01-01

    This paper presents the status of the ongoing work in IEC Technical Committee 88 Working Group 27 (TC88 WG27) developing a standard IEC 61400-27 for “Electrical simulation models for wind power generation”. The purpose of this standardization work is to define generic simulation models for wind...... turbines (part 1) and wind power plants (part 2), which are intended for short-term power system stability analyses. WG27 submitted the first CD of Part 1 in December 2012. The CD describes generic wind turbine models and a procedure for validation of wind turbine models. The generic model description...... consists of a general model structure intending to cover existing as well as future types of wind turbines, and specific fundamental frequency positive sequence models for the four wind turbine types which are widely used today. The validation procedure can be applied to the generic models specified...

  9. Record of Decision for the Electrical Interconnection of the Windy Point Wind Energy Project.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    2006-11-01

    The Bonneville Power Administration (BPA) has decided to offer contract terms for interconnection of 250 megawatts (MW) of power to be generated by the proposed Windy Point Wind Energy Project (Wind Project) into the Federal Columbia River Transmission System (FCRTS). Windy Point Partners, LLC (WPP) propose to construct and operate the proposed Wind Project and has requested interconnection to the FCRTS. The Wind Project will be interconnected at BPA's Rock Creek Substation, which is under construction in Klickitat County, Washington. The Rock Creek Substation will provide transmission access for the Wind Project to BPA's Wautoma-John Day No.1 500-kilovolt (kV) transmission line. BPA's decision to offer terms to interconnect the Wind Project is consistent with BPA's Business Plan Final Environmental Impact Statement (BP EIS) (DOE/EIS-0183, June 1995), and the Business Plan Record of Decision (BP ROD, August 15, 1995). This decision thus is tiered to the BP ROD.

  10. Nuclear Knowledge Capture and IEC Standards

    International Nuclear Information System (INIS)

    Sheldon, J.

    2016-01-01

    Full text: An International Standard is a document, established by consensus and approved by a recognized body that provides, for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context. As such, it is a mechanism for sharing knowledge in a particular field. The consensus process used to approve the content of standards ensures that the content is essentially peer-reviewed. This presentation will explain how International Standards are developed and used and their importance in the dissemination of scientific and engineering information. It will also explain the role of the IEC in ensuring that the process for developing standards meets the core principles of the Code of Good Practice of the WTO TBT agreement: transparency, openness, impartiality and consensus, effectiveness and relevance, coherence, and addressing the concerns of developing countries. (author

  11. Basic Characteristics of IEC Flickermeter Processing

    Directory of Open Access Journals (Sweden)

    Jarosław Majchrzak

    2012-01-01

    . This paper presents the results of the numerical simulations that reconstruct the processing of flickermeter in frequency domain. With the use of standard test signals, the characteristics of flickermeter were determined for the case of amplitude modulation of input signal, frequency modulation of input signal, and for input signal with interharmonic component. For the needs of simulative research, elements of standard IEC flickermeter signal chain as well as test signal source and tools for acquisition, archiving, and presentation of the obtained results were modeled. The results were presented with a set of charts, and the specific fragments of the charts were pointed out and commented on. Some examples of the influence of input signal’s bandwidth limitation on the flickermeter measurement result were presented for the case of AM and FM modulation. In addition, the diagrams that enable the evaluation of flickermeter’s linearity were also presented.

  12. Enhanced Hover Control of Quad Tilt Frame UAV under Windy Conditions

    Directory of Open Access Journals (Sweden)

    R. Krishnakumar

    2015-10-01

    Full Text Available A key research subject in the area of unmanned aerial vehicles (UAVs is how to make them autonomous. Towards this goal, the most vital step is stabilizing the attitude of the vehicles. This paper presents the design of an autonomous control system for a hybrid UAV to enable it to carry out a stable hovering mission under external wind disturbances. The hovering capability of the hybrid UAV under windy conditions is analysed with computational fluid dynamics (CFD and a control law is designed to stabilize the craft in the hovering position. The proposed hovering controller is verified with simulations and experiments. Finally, the flight control system is installed in a small prototype and a full transition flight test, including vertical take-off, transition from vertical flight to cruise, cruise, transition cruise to vertical mode and hover landing, is successfully accomplished.

  13. Electron emitter pulsed-type cylindrical IEC

    International Nuclear Information System (INIS)

    Miley, G.H.; Gu, Y.; Stubbers, R.; Zich, R.; Anderl, R.; Hartwell, J.

    1997-01-01

    A cylindrical version of the single grid Inertial Electrostatic Confinement (IEC) device (termed the C-device) has been developed for use as a 2.5-MeV D-D fusion neutron source for neutron activation analysis. The C-device employs a hollow-tube type cathode with similar anodes backed up by ''reflector'' dishes. The resulting discharge differs from a conventional hollow cathode discharge, by creating an explicit ion beam which is ''pinched'' in the cathode region. Resulting fusion reactions generate ∼10 6 neutron/s. A pulsed version is under development for applications requiring higher fluxes. Several pulsing techniques are under study, including an electron emitter (e-emitter) assisted discharge in a thorated tungsten wire emitter located behind a slotted area in the reflector dishes. Pulsing is initiated after establishing a low power steady-state discharge by pulsing the e-emitter current using a capacitor switch type circuit. The resulting electron jet, coupled with the discharge by the biased slot array, creates a strong pulse in the pinched ion beam. The pulse length/repetition rate are controlled by the e-emitter pulse circuit. Typical parameters in present studies are ∼30micros, 10Hz and 1-amp ion current. Corresponding neutron measurements are an In-foil type activation counter for time averaged rates. Results for a wide variety of operating conditions are presented

  14. ITIL and ISO/IEC 20000 a practical handbook

    CERN Document Server

    Hernandez, Alex

    2012-01-01

    The purpose of this publication is to provide your organization with a pragmatic approach to effectively implementing service management, incorporating practices from the ITIL framework and the ISO/IEC 20000 standard.

  15. OSI95 Contributions to ISO/IEC and ETSI

    OpenAIRE

    Leduc, Guy; Danthine, André

    1994-01-01

    This paper summarizes the activities that were carried out within the standardization bodies ISO/IEC and ETSI during the two-year period of the OSI95 project. However it focuses mainly on the OSI95 contributions.

  16. Building an Interoperability Test System for Electric Vehicle Chargers Based on ISO/IEC 15118 and IEC 61850 Standards

    Directory of Open Access Journals (Sweden)

    Minho Shin

    2016-05-01

    Full Text Available The electric vehicle market is rapidly growing due to its environmental friendliness and governmental support. As electric vehicles are powered by electricity, the interoperability between the vehicles and the chargers made by multiple vendors is crucial for the success of the technology. Relevant standards are being published, but the methods for conformance testing need to be developed. In this paper, we present our conformance test system for the electric vehicle charger in accordance with the standards ISO/IEC 15118, IEC 61851 and IEC 61850-90-8. Our test system leverages the TTCN-3 framework for its flexibility and productivity. We evaluate the test system by lab tests with two reference chargers that we built. We also present the test results in two international testival events for the ISO/IEC 15118 interoperability. We confirmed that our test system is robust, efficient and practical.

  17. IEC Newsletter, No. 47, First Quarter 2014

    International Nuclear Information System (INIS)

    2014-05-01

    The ConvEx-3 (2013) evaluation meeting - the Fifth Meeting of the Inter-Agency Committee on Radiological and Nuclear Emergencies Working Group on Coordinated International Exercises (IACRNE-WG-CIE) - took place at IAEA Headquarters in Vienna from 11-12 February 2014. Representatives from the Moroccan authorities, members of the IACRNE Working Group on Coordinated International Exercises, exercise chief evaluators, and the chairperson of the National Competent Authority Coordination Group (NCACG) were invited and participated in the meeting. The objectives of the meeting were to evaluate the ConvEx-3 (2013) exercise, to review the draft Exercise Report, and to discuss exercise findings and conclusions. On the first day of the meeting (11 February), the exercise was evaluated by the host country Morocco and by chief evaluators of some international organizations and Member States. National objectives, findings, conclusions and recommendations for emergency preparedness and response improvements were presented and discussed. On the second day (12 February), the Lead Exercise Evaluator and chair of the ICARNE WG-CIE, presented the draft Exercise Report, and proposals for common findings, conclusions and recommendations based on the Chief Evaluator's reports were consolidated. It was also agreed that the revised draft Exercise Report will be distributed for comment and feedback to all chief evaluators who have submitted evaluation reports to the IAEA. The ConvEx-3 exercise was conducted by the Incident and Emergency Centre (IEC) on 20-21 November 2013. Fifty-nine Member States (including Morocco) and ten international organizations (including the IAEA) participated in the exercise

  18. Information security for energy automation. IEC 62351 Challenges and possible solutions; Informationsicherheit fuer die Energieautomatisierung. IEC 62351 - Herausforderungen und Loesungsansaetze

    Energy Technology Data Exchange (ETDEWEB)

    Knorr, K.; Fries, S. [Sector Corporate Technology, Siemens AG, Muenchen (Germany); Seewald, M.G. [Sector Energy, Siemens AG, Nuernberg (Germany)

    2008-10-06

    Information security has gained tremendous importance for energy automation systems over the last years. New standards like IEC 62351 address this topic and specify technical requirements which have to be met by the vendors. Especially vendors that cover the entire energy automation chain with their product portfolio have to face several new demanding challenges. The authors describe suitable approaches and implementation issues that are derived from selected IEC 62351 requirements following the product lifecycle process. (orig.)

  19. Determining Parameters of Photodiodes which are Characteristics from Ionisation Chambers Following IEC 731-1982 Standards

    International Nuclear Information System (INIS)

    Barbosa, R.A.; Lopes, R.T.; Tauhata, L.; Poledna, R.

    1999-01-01

    A dosemeter is presented with a photodiode base, characterised as a field class instrument. The performance of three photodiode models, a commercially available (Siemens) and two others (Hamamatsu), were compared with the performance of the ionisation chamber, using the limits established in the IEC 731 Standard as requirement. The long-term stability and the energy dependence tests have shown results outside the limits but, in special situations such as X ray beam monitoring, these deficiencies have no influence on the dosemeter performance. The rotation test results have shown the possibility of using a photodiode to determine the field uniformity. (author)

  20. Changes in IEC standards related to diagnostic radiology

    International Nuclear Information System (INIS)

    Porubszky, T.; Barsai, J.

    2007-01-01

    Complete test of publication follows. Purposes. Technical Committee TC62 of International Electrotechnical Commission (IEC) deals with medical electrical equipment (i.e. medical devices using electricity). Standardization concerning diagnostic radiology equipment is task of its Sub-Committee SC62B. An outlook of its activities and present situation, and especially of radiation protection aspects, is given. Materials and methods. Third edition of basic safety standard for medical electrical equipment IEC 60601-1 was issued in 2005. Elaboration of new collateral and particular standards - applicable together with it - is in progress. These standards are generally at the same time also European - EN - and national standards. There is a great importance of radiation protection in diagnostic X-ray equipment. Collateral standard IEC 6060-1-3 about it was at first issued in 1994. Rapid development of imaging technology demands updating of requirements. SC62B in 2003 founded a maintenance team MT37 for preparation of the second edition of this standard. According to new safety philosophy of IEC all modality specific requirements are to be collected in 'safety and essential performance' particular standards. A new working group WG42 - founded in 2006 - elaborates a new particular standard IEC 60601-2-54 for radiographic and radioscopic equipment. Maintenance team MT32 deals with safety and performance standards for X-ray tube assemblies. The authors actively participate in these activities. Results and discussion. Present and future system of diagnostic radiology IEC standards and some interesting details are presented. Conclusions. International standards - although they are not 'obligatory' - are generally the basis of safety and performance certification of diagnostic radiology equipment and often also of their quality assurance.

  1. Um modelo de integração entre os padrões IEC 61850 e IEC 61970 (CIM/ XML).

    OpenAIRE

    Osvaldo Rein Junior

    2006-01-01

    REIN JR., O. UM MODELO DE INTEGRAÇÃO ENTRE OS PADRÕES IEC 61850 E IEC 61970 (CIM/XML). 2006. 98 p. Dissertação Mestrado – Escola Politécnica, Universidade de São Paulo, São Paulo. A troca de informação entre os vários sistemas de gerenciamento e outros sistemas de informação de uma empresa do setor elétrico não é apenas desejada, mas, na maioria dos casos, necessária. Dois padrões internacionais surgiram, um relacionado à troca de dados nas subestações (IEC 61850) e outro relacionado à troca ...

  2. SysGRID: IEC 61850 and IEC 61499 Standard Based Engineering Tool for Smart Grid Automation Design

    Directory of Open Access Journals (Sweden)

    Chen-Wei Yang

    2014-12-01

    Full Text Available The so called Smart Grid is said to be distributed in nature with an accompanying control architecture which is made up of a heterogeneous network of controllers communicating in a peer-to-peer manner. The paper proposes a novel computer-aided model-based system engineering process for the design of a Smart Grid applications from the initial design specification through to the validation of the control system and hardware deployment. The process is supported by the SysGRID tool, which plays the roles of a system configurator and device configurator adopted from the International Standard IEC 61850. SysGRID supports system-level design of automation logic in the form of function block networks compliant with the international standard IEC 61499. The capabilities of SysGRID are demonstrated through the process of designing a distributed protection application based on IEC 61850 and the resultant validation process in a close-loop co-simulation.

  3. Inertial electrostatic confinement (IEC) fusion fundamentals and applications

    CERN Document Server

    Miley, George H

    2014-01-01

    This book provides readers with an introductory understanding of Inertial Electrostatic Confinement (IEC), a type of fusion meant to retain plasma using an electrostatic field. IEC provides a unique approach for plasma confinement, as it offers a number of spin-off applications, such as a small neutron source for Neutron Activity Analysis (NAA), that all work towards creating fusion power. The IEC has been identified in recent times as an ideal fusion power unit because of its ability to burn aneutronic fuels like p-B11 as a result of its non-Maxwellian plasma dominated by beam-like ions. This type of fusion also takes place in a simple mechanical structure small in size, which also contributes to its viability as a source of power. This book posits that the ability to study the physics of IEC in very small volume plasmas makes it possible to rapidly investigate a design to create a power-producing device on a much larger scale. Along with this hypothesis the book also includes a conceptual experiment propose...

  4. Handling IEC1157: Complicated output measurements - A challenge

    NARCIS (Netherlands)

    Hekkenberg, R.T.; Oosterbaan, W.A.; Teirlinck, C.J.P.M.

    1996-01-01

    The parameters listed in IEC1157 standard 'Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment' are mainly based on the safety aspects of medical ultrasound in diagnostic examinations. The standard can be used in the process of satisfying the European

  5. Can we use IEC 61850 for safety related functions?

    Directory of Open Access Journals (Sweden)

    Luca Rocca

    2016-08-01

    Full Text Available Safety is an essential issue for processes that present high risk for human beings and environment. An acceptable level of risk is obtained both with actions on the process itself (risk reduction and with the use of special safety systems that switch the process into safe mode when a fault or an abnormal operation mode happens. These safety systems are today based on digital devices that communicate through digital networks. The IEC 61508 series specifies the safety requirements of all the devices that are involved in a safety function, including the communication network. Also electrical generation and distribution systems are processes that may have a significant level of risk, so the criteria stated by the IEC 61508 applies. Starting from this consideration, the paper analyzes the safety requirement for the communication network and compare them with the services of the communication protocol IEC 61850 that represents the most used protocol for automation of electrical plants. The goal of this job is to demonstrate that, from the technical point of view, IEC 61850 can be used for implementing safety-related functions, even if a formal safety certification is still missing.

  6. ISO/IEC 38500 the IT governance standard

    CERN Document Server

    Calder, Alan

    2008-01-01

    The emergence of ISO/IEC 38500 - the international standard for the corporate governance of information and communication technology - puts boards around the world in a position from which they can take effective action to apply core governance principles to their information and communication technology.

  7. IEC-TC88WG8 testing of rotor blades

    Energy Technology Data Exchange (ETDEWEB)

    Delft, D.R.V. van [Delft Univ. of Technology, STEVIN Lab., Delft (Netherlands)

    1996-09-01

    In 1994 the TC88 of IEC installed a working group (WG8) to draft a guideline on blade testing. This paper gives a description of the task of the working group. Furthermore it gives a report of the progress of the work and summarizes the possible contents of the working group document on blade testing. (au)

  8. IEC Thrusters for Space Probe Applications and Propulsion

    Science.gov (United States)

    Miley, George H.; Momota, Hiromu; Wu, Linchun; Reilly, Michael P.; Teofilo, Vince L.; Burton, Rodney; Dell, Richard; Dell, Dick; Hargus, William A.

    2009-03-01

    Earlier conceptual design studies (Bussard, 1990; Miley et al., 1998; Burton et al., 2003) have described Inertial Electrostatic Confinement (IEC) fusion propulsion to provide a high-power density fusion propulsion system capable of aggressive deep space missions. However, this requires large multi-GW thrusters and a long term development program. As a first step towards this goal, a progression of near-term IEC thrusters, stating with a 1-10 kWe electrically-driven IEC jet thruster for satellites are considered here. The initial electrically-powered unit uses a novel multi-jet plasma thruster based on spherical IEC technology with electrical input power from a solar panel. In this spherical configuration, Xe ions are generated and accelerated towards the center of double concentric spherical grids. An electrostatic potential well structure is created in the central region, providing ion trapping. Several enlarged grid opening extract intense quasi-neutral plasma jets. A variable specific impulse in the range of 1000-4000 seconds is achieved by adjusting the grid potential. This design provides high maneuverability for satellite and small space probe operations. The multiple jets, combined with gimbaled auxiliary equipment, provide precision changes in thrust direction. The IEC electrical efficiency can match or exceed efficiencies of conventional Hall Current Thrusters (HCTs) while offering advantages such as reduced grid erosion (long life time), reduced propellant leakage losses (reduced fuel storage), and a very high power-to-weight ratio. The unit is ideally suited for probing missions. The primary propulsive jet enables delicate maneuvering close to an object. Then simply opening a second jet offset 180 degrees from the propulsion one provides a "plasma analytic probe" for interrogation of the object.

  9. IEC Thrusters for Space Probe Applications and Propulsion

    International Nuclear Information System (INIS)

    Miley, George H.; Momota, Hiromu; Wu Linchun; Reilly, Michael P.; Teofilo, Vince L.; Burton, Rodney; Dell, Richard; Dell, Dick; Hargus, William A.

    2009-01-01

    Earlier conceptual design studies (Bussard, 1990; Miley et al., 1998; Burton et al., 2003) have described Inertial Electrostatic Confinement (IEC) fusion propulsion to provide a high-power density fusion propulsion system capable of aggressive deep space missions. However, this requires large multi-GW thrusters and a long term development program. As a first step towards this goal, a progression of near-term IEC thrusters, stating with a 1-10 kWe electrically-driven IEC jet thruster for satellites are considered here. The initial electrically-powered unit uses a novel multi-jet plasma thruster based on spherical IEC technology with electrical input power from a solar panel. In this spherical configuration, Xe ions are generated and accelerated towards the center of double concentric spherical grids. An electrostatic potential well structure is created in the central region, providing ion trapping. Several enlarged grid opening extract intense quasi-neutral plasma jets. A variable specific impulse in the range of 1000-4000 seconds is achieved by adjusting the grid potential. This design provides high maneuverability for satellite and small space probe operations. The multiple jets, combined with gimbaled auxiliary equipment, provide precision changes in thrust direction. The IEC electrical efficiency can match or exceed efficiencies of conventional Hall Current Thrusters (HCTs) while offering advantages such as reduced grid erosion (long life time), reduced propellant leakage losses (reduced fuel storage), and a very high power-to-weight ratio. The unit is ideally suited for probing missions. The primary propulsive jet enables delicate maneuvering close to an object. Then simply opening a second jet offset 180 degrees from the propulsion one provides a 'plasma analytic probe' for interrogation of the object.

  10. IEC Information Bulletin, No. 39, First Quarter 2012

    International Nuclear Information System (INIS)

    2012-01-01

    On 28 March, the Incident and Emergency Centre (IEC) conducted its first Full Response Exercise of 2012. Over 30 staff members from the Department of Nuclear Safety and Security and the Division of Public Information participated. The IEC was activated into full response mode at approximately 9 a.m. This full response lasted most of the day and led up to a 'lessons learned' discussion at the end of the day. Florian Baciu, the IEC Response System Coordinator, noted: ''Although many of the participants were involved in the IAEA response to the accident at TEPCO's Fukushima Daiichi nuclear power plant, this exercise gave them the opportunity to practice procedures which they had not used since then. In addition, we had several staff members relatively new to the IAEA's Incident and Emergency System among the participants.'' Hilaire Mansoux, one of the Emergency Response Managers for the exercise, stated: ''The scenario was quite complex, requiring a good flow of information.'' The IEC staff had developed a scenario in which a meltdown and resulting release of radioactive materials to the environment from a nuclear power plant in a Member State was caused by a criminal act. All outside organizations were represented by the IEC staff in a simulation cell, which periodically contributed information using telephone calls, faxes, emails and messages through the IAEA's Unified System for Information Exchange in Incidents and Emergencies (USIE). The tasks of the IAEA in the area of emergency response were expanded through the mandate given by Member States following the events at Fukushima Daiichi last year. In the area of communication and information dissemination, the IAEA was also given, among other tasks, the mandate to assess emergency situations by providing 'analysis of available information and prognosis of possible scenarios'. Together with other matters, the assessment aspect was addressed in this full response exercise.

  11. State estimation for autopilot control of small unmanned aerial vehicles in windy conditions

    Science.gov (United States)

    Poorman, David Paul

    -zero mean error that increases when gyro bias is increased. The second method is shown to not exhibit any steady state error in the tested scenarios that is inherent to its design. The second method can correct for attitude errors that arise from both integration error and gyro bias states, but it suffers from lack of attitude error observability. The attitude errors are shown to be more observable in wind, but increased integration error in wind outweighs the increase in attitude corrections that such increased observability brings, resulting in larger attitude errors in wind. Overall, this work highlights many technical deficiencies of both of these methods of state estimation that could be improved upon in the future to enhance state estimation for small UAVs in windy conditions.

  12. US-Japan IEC Workshop on Small Plasma and Accelerator Neutron Sources

    Energy Technology Data Exchange (ETDEWEB)

    Miley, George H. [Univ. of Illinois, Champaign, IL (United States). Dept. of Nuclear, Plasma, and Radiological Engineering

    2007-05-25

    This report lays out the agenda for the entire workshop and then lists the abstracts for all 29 presentations. All of these presentations cover small plasma and accelerator neutron sources. A few of the presentations include: Comments about IEC History and Future Directions; Characteristics in Pulse Operation of IEC Device with Confronting Two Plasma Sources; Overview of the University of Wisconsin-Madison IEC Program; Improving IEC Particle Confinement Times Using Multiple Grids; Integral Transport Approach for Molecular Ion Processes in IEC Devices; A Counter Stream Beam D-D Neutron Generator; Low Pressure IECF Operation Using Differentially-Pumped Ion Sources, and more.

  13. Testování komunikace ochran podle IEC 61850

    OpenAIRE

    Bolgár, Robert

    2011-01-01

    Cieľom práce je praktické použitie normy IEC 61850, ktorá sa zaoberá komunikáciou zariadení v rozvodni ale aj mimo ňu. Hlavná myšlienka je v návrhu modelu, ktorý bude slúžiť pre testovanie komunikácie medzi ochranami za pomoci testovacieho zariadenia CMC 256plus od firmy OMICRON a jeho softvérového vybavenia „IEDScout“, „GOOSE Configuration“ a „QuickCMC“. Goal of this thesis is practical use of standard IEC 61850, which deals with communication between devices in substation. The main idea ...

  14. A collimator-converter system for IEC propulsion

    Science.gov (United States)

    Momota, Hiromu; Miley, George H.

    2002-01-01

    The collimator-converter system extracts fusion power from D-3He fueled IEC devices and provides electricity needed to operate ionic thrusters and other-power components. The whole system is linear and consists of a series of collimator units at the center, magnetic expander units at both sides of the fusion units, followed by direct energy converters at both ends. This system is enclosed in a vacuum chamber with a magnetic channel provided by magnetic solenoids out of respective chambers. The fusion unit consists of an IEC fusion core, a pair of coils anti-parallel to the solenoid coils, and a stabilization coil that stabilizes the position of coil pair coils. The IEC fusion core is installed at the center of the pair coils. After the magnetic expander, velocities of fusion particles from D-3He fueled IEC units are directed to the magnetic channel, which guides energetic fusion particles as well as leaking unburned fuel components to a high-efficiency traveling wave direct energy converter (TWDEC). Leaking unburned fuel components are separated with a magnetic separator at the entrance of a direct energy converter and pumped out for further refueling. A TWDEC is made of an array of metallic meshed grids, each of which is connected to every terminal with an external transmission circuit. The transmission line couples to the direct energy converter. Substations for electricity, a cryogenic plant, and various power control systems are outside of the vacuum chamber. The length of the cylindrical system is essentially determined by the proton energy of 14.8 MeV and the radius should be large so as to reduce power flow density. The present system provides 250 MWf fusion power and converting it to 150 MWc electricity. Its size is 150 m(length)×6.6 m(diameter) in size and 185 tons in weight. .

  15. Adaptive Micro-Grid Operation Based on IEC 61850

    Directory of Open Access Journals (Sweden)

    Wei Deng

    2015-05-01

    Full Text Available Automatically identifying the new equipment after its integration and adjusting operation strategy to realize “plug and play” functionality are becoming essential for micro-grid operations. In order to improve and perfect the micro-grid “plug and play” function with the increased amount of equipment with different information protocols and more diverse system applications, this paper presents a solution for adaptive micro-grid operation based on IEC 61850, and proposes the design and specific implementation methods of micro-grid “plug and play” function and system operation mode conversion in detail, by using the established IEC 61850 information model of a micro-grid. Actual operation tests based on the developed IED and micro-grid test platform are performed to verify the feasibility and validity of the proposed solution. The tests results show that the solution can automatically identify the IEC 61850 information model of equipment after its integration, intelligently adjust the operation strategies to adapt to new system states and achieves a reliable system operation mode conversion.

  16. Direct energy conversion for IEC fusion for space applications

    International Nuclear Information System (INIS)

    Momota, Hiromu; Nadler, Jon; Miley, George H.

    2000-08-01

    The paper describes a concept of extracting fusion power from D- 3 He fueled IEC (Inertia Electrostatic Configuration) devices. The fusion system consists of a series of fusion modules and direct energy converters at an end or at both ends. This system of multiple units is linear and is connected by a magnetic field. A pair of coils anti-parallel to the magnetic field yields a field-null domain at the center of each unit as required for IEC operation. A stabilizing coil installed between the coil pairs eliminates the strong attractive force between the anti-parallel coils. Accessible regions for charged particle trajectories are essentially isolated from the coil structure. Thus, charged particles are directed along magnetic field lines to the direct energy converter without appreciable losses. A direct energy converter unit designed to be compatible to this unique system is also described. It basically consists of a separator and a traveling wave converter. A separator separates low energy ions and electron from the 14.7 MeV fusion protons and then converts their energy into electricity. In the traveling wave direct energy converter, fusion protons are modulated to form bunches. It couples with a transmission line to couple AC power out. The overall conversion efficiency of this system, combined with E- 3 He IEC cores, is estimated as high as 60%. (author)

  17. Direct energy conversion for IEC fusion for space applications

    Energy Technology Data Exchange (ETDEWEB)

    Momota, Hiromu; Nadler, Jon [National Inst. for Fusion Science, Toki, Gifu (Japan); Miley, George H. [Fusion Studies Laboratory, Urbana, IL (United States)

    2000-08-01

    The paper describes a concept of extracting fusion power from D-{sup 3}He fueled IEC (Inertia Electrostatic Configuration) devices. The fusion system consists of a series of fusion modules and direct energy converters at an end or at both ends. This system of multiple units is linear and is connected by a magnetic field. A pair of coils anti-parallel to the magnetic field yields a field-null domain at the center of each unit as required for IEC operation. A stabilizing coil installed between the coil pairs eliminates the strong attractive force between the anti-parallel coils. Accessible regions for charged particle trajectories are essentially isolated from the coil structure. Thus, charged particles are directed along magnetic field lines to the direct energy converter without appreciable losses. A direct energy converter unit designed to be compatible to this unique system is also described. It basically consists of a separator and a traveling wave converter. A separator separates low energy ions and electron from the 14.7 MeV fusion protons and then converts their energy into electricity. In the traveling wave direct energy converter, fusion protons are modulated to form bunches. It couples with a transmission line to couple AC power out. The overall conversion efficiency of this system, combined with E-{sup 3}He IEC cores, is estimated as high as 60%. (author)

  18. Design and Experiment of FBG-Based Icing Monitoring on Overhead Transmission Lines with an Improvement Trial for Windy Weather

    Directory of Open Access Journals (Sweden)

    Min Zhang

    2014-12-01

    Full Text Available A scheme for monitoring icing on overhead transmission lines with fiber Bragg grating (FBG strain sensors is designed and evaluated both theoretically and experimentally. The influences of temperature and wind are considered. The results of field experiments using simulated ice loading on windless days indicate that the scheme is capable of monitoring the icing thickness within 0–30 mm with an accuracy of ±1 mm, a load cell error of 0.0308v, a repeatability error of 0.3328v and a hysteresis error is 0.026%. To improve the measurement during windy weather, a correction factor is added to the effective gravity acceleration, and the absolute FBG strain is replaced by its statistical average.

  19. US-Japan IEC Workshop on Small Plasma and Accelerator Neutron Sources. Final report

    International Nuclear Information System (INIS)

    Miley, George H.

    2008-01-01

    The history of IEC development will be briefly described, and some speculation about future directions will be offered. The origin of IEC is due to the brilliance of Phil Farnsworth, inventor of electronic TV in the US. Early experiments were pioneered in the late 1960s by Robert Hirsch who later became head of the DOE fusion program. At that time studies of IEC physics quickly followed at the University of Illinois and at Penn State University. However, despite many successes in this early work, IEC research died as DOE funding stopped in the mid 1980s. In the early 90's, R. W. Bussard of EMC revived work with a new major project based on a magnetic assisted IEC. While doing supportive studies for that project, G. Miley proposed a grided 'STAR mode' IEC as a neutron source for NAA. This concept was later used commercially by Daimler-Benz in Germany to analysis impurities in incoming ores. This represented a first practical application of the IEC. During this period other research groups at LANL, U of Wisconsin and Kyoto University entered IEC research with innovative new concepts and approaches to IEC physics and applications. Much of this work is documented in the present and in past US-Japan Workshops. At present we stand on the threshold of a new area of IEC applications as neutron source, for isotope production, and as a plasma source. These applications provide a way to continue IEC understanding and technology development with the ultimate goal being a fusion power plant. Indeed, a distinguishing feature of the IEC vs. other fusion confinement approaches is the unique opportunity for 'spin off' applications along the way to a power producing plant.

  20. System for Coupling an IEC Reactor to Ion Thrusters

    Science.gov (United States)

    Webber, Jason; Burton, Rodney; Momoto, Hiromu; Miley, George; Richardson, Nathan

    2002-11-01

    A conceptual design for an electric-thruster-driven space ship using a D-He3 fueled Inertial Electrostatic Confinement (IEC) fusion power unit was recently developed [1]. This propulsion system uses a bank of modified NSTAR-type krypton ion thrusters (specific impulse of 16,000 sec.) giving a total thrust of 1020 N. The thrust time for a typical outer planet mission ( e.g. Jupiter) with a delta-V of 50,000 m/s is then 200 days. A key component of this concept is a traveling wave direct energy converter that converts the kinetic energy of 14-MeV fusion reaction product protons to high voltage (about 1 MV) DC electrical output. A unique step-down transformer and rectifier system condition this output for use in the ion thrusters. Details of these components, the NSTAR-thruster modifications plus a magnetic hexa-pole collimator designed to guide the emitted protons into the traveling wave converter will be described. This advanced electric thruster design offers a very high power-to-weight ratio system that is crucial for deep space propulsion. [1] George H. Miley, Hiromu Momota, R. Burton, N.Richardson, M. Coventry, and Y. Shaban, IEC Based D-He3 Fusion for Space Propulsion, Trans Am. Nuclear Society, Annual Meeting, Hollywood, FL, June 2002.

  1. ISO-IEC MPEG-2 software video codec

    Science.gov (United States)

    Eckart, Stefan; Fogg, Chad E.

    1995-04-01

    Part 5 of the International Standard ISO/IEC 13818 `Generic Coding of Moving Pictures and Associated Audio' (MPEG-2) is a Technical Report, a sample software implementation of the procedures in parts 1, 2 and 3 of the standard (systems, video, and audio). This paper focuses on the video software, which gives an example of a fully compliant implementation of the standard and of a good video quality encoder, and serves as a tool for compliance testing. The implementation and some of the development aspects of the codec are described. The encoder is based on Test Model 5 (TM5), one of the best, published, non-proprietary coding models, which was used during MPEG-2 collaborative stage to evaluate proposed algorithms and to verify the syntax. The most important part of the Test Model is controlling the quantization parameter based on the image content and bit rate constraints under both signal-to-noise and psycho-optical aspects. The decoder has been successfully tested for compliance with the MPEG-2 standard, using the ISO/IEC MPEG verification and compliance bitstream test suites as stimuli.

  2. Testování komunikace ochran podle IEC 61850

    OpenAIRE

    Uchytil, Tomáš

    2011-01-01

    V práci je vytvořený přehled o novém souboru norem IEC 61850. Jsou zde stručně popsány jednotlivé části normy. Větší prostor je věnován rozboru komunikace v rozvodnách a vlastnostem vysílaných horizontálních zpráv GOOSE. Další část práce je věnována testerům ochran a jejich využití v testování komunikace v rozvodnách podle IEC 61850. Poslední částí je praktická ukázka použití testeru a softwaru pro monitorování komunikace na síti a měření reakce zařízení ovládaného pomocí GOOSE zpráv. This...

  3. Migración de un SGSI basado en ISO/IEC 27001:2005 a la versión ISO/IEC 27001:2013

    OpenAIRE

    Espol; Rendón Freire, María José

    2015-01-01

    Este proyecto tiene como objetivo identificar los cambios en los requisitos de la norma ISO/IEC 27001:2013 respecto a la versión 2005, para lograr la actualización de un sistema de gestión de seguridad de la información basado en ISO/IEC 27001:2005 acorde a lo establecido en el nuevo estándar. Guayaquil Magíster en Seguridad Informática Aplicada

  4. Prototype of generic server for wind power plants using IEC 61400-25 standard

    DEFF Research Database (Denmark)

    Olsen, Andreas K.; Ösdil, B.; Poulsen, Bjarne

    2006-01-01

    IEC61850[1] has defined a family of standards for the power grid. For instance, the new IEC 61400-25[2] defines protocols for communication, control, and monitor-ing of wind power plants (WPP). This standard includes a wide range of mandatory and optional elements in the defined models, ranging...

  5. Choosing change strategy for ISO/IEC 33014

    DEFF Research Database (Denmark)

    Pries-Heje, Jan; Johansen, Jørn

    2015-01-01

    of how to select change strategy. The framework contains 10 different change strategies to choose from. But which ones are chosen in practice? To answer that, we have analyzed data from 134 assessments in 129 organizations that have used the framework. We give a ranking of strategies chosen, and we......The ISO/IEC 33014.2013 [1] standard on process improvement includes a core activity called ‘identify the overall change strategy’, which includes selecting a change strategy among the many available. This selection can be carried out using the ImprovAbility model [2] in which there is a framework...... analyze how they adapt the change strategy to their specific conditions. We conclude that the most often recommended organizational change strategy is optionality followed by three other strategies: specialist-driven, production-organized, and learning-driven....

  6. Efficient IEC permanent-magnet motor (3 kW) - Final report; Effizienter IEC Permanent-Magnet-Motor (3 kW) - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Lindegger, M. [Circle Motor AG, Guemligen (Switzerland); Biner, H. P.; Evequoz, B. [Haute Ecole valaisanne, Sion (Switzerland); Salathe, D. [Hochschule Luzern, Technik und Architektur, Horw (Switzerland)

    2008-04-15

    Efficient permanent-magnet motors achieve in the area up to 100 kW a higher efficiency than induction machines (standard motors). A simple and fast energy saving option is the exchange of inefficient standard motors. The objective of this work is to install a 3 kW permanent-magnet motor in a standard IEC housing and the optimization of the design for high efficiency. Another objective is the development and the realization of an efficient variable speed control. The efficiency of the motor and the inverter with the control system must be demonstrated by tests. These tasks have been split between Circle Motor AG and the universities of applied sciences of Valais and Lucerne. Considering high-efficiency and low manufacturing cost, a brushless DC solution was adopted. This resulted in an optimum design of the motor and the control system realized with a three-phase rectifier, a buck converter with variable DC voltage, and a three-phase inverter feeding full positive and negative current to two of the legs simultaneously. The maximum measured efficiency is about 96.5% for the inverter and 92% for the motor. With the advantage of the variable speed operation, the efficiency of the realized 3 kW permanent magnet motor together with the control system is always higher than the efficiency of a measured class EFF1 induction motor, even with a direct connection to the grid. The permanent-magnet motor is also about 10 kg lighter. The cost calculation shows that the permanent-magnet motor can be competitive with the induction motor when speed control is desired. This is also the domain with the largest potential for energy savings from variable speed pumps, compressors, fans. (author)

  7. An IEC standard on quality assurance for diagnostic X-ray systems

    International Nuclear Information System (INIS)

    Boer, J.A. den

    1985-01-01

    A presentation is given of some characteristics of the International Electrotechnical Commission (IEC). This is followed by a short discussion of general aspects of quality assurance in the diagnostic department. From this discussion it becomes apparent to which aspects of quality assurance IEC can contribute. Within that framework a working group of Sub-Committee 62 is at present active in developing a standard on quality assurance for diagnostic X-ray systems. The standard will contain a set of constancy tests that is claimed to allow a balanced quality assurance programme. The democratic procedure of IEC should guarantee that the proposed standard gains wide acceptance. (author)

  8. Software-defined networking model for smart transformers with ISO/IEC/IEEE 21451 sensors

    Directory of Open Access Journals (Sweden)

    Longhua Guo

    2017-06-01

    Full Text Available The advanced IEC 61850 smart transformer has shown an improved performance in monitoring, controlling, and protecting the equipment in smart substations. However, heterogeneity, feasibility, and network control problems have limited the smart transformer’s performance in networks. To address these issues, a software-defined networking model was proposed using ISO/IEC/IEEE 21451 networks. An IEC-61850-based network controller was designed as a new kind of intelligent electrical device (IED. The proposed data and information models enhanced the network awareness ability and facilitated the access of smart sensors in transformer to communication networks. The performance evaluation results showed an improved efficiency.

  9. FPGA-based network intrusion detection for IEC 61850-based industrial network

    Directory of Open Access Journals (Sweden)

    Junsik Kim

    2018-03-01

    Full Text Available This paper proposes an FPGA-based network intrusion detection system for the IEC 61850-based industrial network that is specially designed for substation automation. The proposed system uses the Shift-And algorithm for detecting malicious network packets within IEC 61850 messages. To implement a complex rule matching module with a limited memory size of FPGA, a specially designed rule matching module was proposed in this paper. For feasibility evaluation, a prototype with 265 regular expression matching modules was implemented using Xilinx Zynq-7030 FPGA and its performance is presented in this paper. Keywords: Network intrusion detection system (NIDS, IEC 61850, Regular expression, Substation automation, FPGA

  10. Late Holocene dune mobilizations in the northwestern Negev dunefield, Israel: A response to combined anthropogenic activity and short-term intensified windiness

    Science.gov (United States)

    Roskin, Joel; Katra, Itzhak; Blumberg, Dan G.

    2013-04-01

    The study of the effects of past climates on ancient cultures is usually based on geologic records pertaining to rainfall and temperature fluctuations and shifts. This study proposes a paradigm of anthropogenic activity and windiness fluctuations to explain aeolian sedimentation and dune mobilization in the northwestern (NW) Negev Desert dunefield (Israel). The proposed paradigm contributes a different approach to estimating the effect of climate changes on the unprecedented agricultural and urban settlement expansion during the late Roman to Early Islamic period in the northern and central Negev Desert. This study builds upon the late Holocene cluster of luminescence ages of Roskin et al. (Age, origin and climatic controls on vegetated linear dunes in the northwestern Negev Desert (Israel), Quaternary Science Reviews 30 (2011), 1649-1674) coupled with analysis of archaeological finds and historical texts. We suggest that whereas the NW Negev dunefield was generally stable during the Holocene, intermittent dune mobilization during the late Holocene, at ~1.8 ka and mostly 1.4-1.1 ka (~600-900 CE), are linked to periods of human occupation. The idea that the last glacial dune encroachments alone that formed the NW Negev dunefield is connected to cold-event windy climates that may have intensified East Mediterranean cyclonic winter storms, cannot explain the late Holocene dune mobilizations. We conceptually model a connection between late Holocene dune mobilization, widespread anthropogenic occupation and activity, and windiness. We maintain that historic grazing and uprooting shrubs for fuel in the past by nomads and sedentary populations led to decimation of dune stabilizers, biogenic soil crusts and vegetation, causing dune erodibility and low-grade activity. Short-term events of amplified wind power in conjunction with periods of augmented anthropogenic activity that triggered major events of dune mobilization (elongation) and accretion have been preserved in the

  11. Auto-Mapping and Configuration Method of IEC 61850 Information Model Based on OPC UA

    Directory of Open Access Journals (Sweden)

    In-Jae Shin

    2016-11-01

    Full Text Available The open-platform communication (OPC unified architecture (UA (IEC62541 is introduced as a key technology for realizing a variety of smart grid (SG use cases enabling relevant automation and control tasks. The OPC UA can expand interoperability between power systems. The top-level SG management platform needs independent middleware to transparently manage the power information technology (IT systems, including the IEC 61850. To expand interoperability between the power system for a large number of stakeholders and various standards, this paper focuses on the IEC 61850 for the digital substation. In this paper, we propose the interconnection method to integrate communication with OPC UA and convert OPC UA AddressSpace using system configuration description language (SCL of IEC 61850. We implemented the mapping process for the verification of the interconnection method. The interconnection method in this paper can expand interoperability between power systems for OPC UA integration for various data structures in the smart grid.

  12. A primer on the Petri Net Markup Language and ISO/IEC 15909-2

    DEFF Research Database (Denmark)

    Hillah, L. M.; Kindler, Ekkart; Kordon, F.

    2009-01-01

    ISO/IEC 15909 is an International Standard that is concerned with the high-level Petri nets. Part 1 defines the concepts, the mathematics, and the graphical notation -- and some variants of high-level nets. Part 2 of ISO/IEC 15909, which is currently under the last ballot to be an International......, it is used in a setting restricted to high-level nets and a simple version of Petri nets called Place/Transition-Systems. Future parts, of PNML will use the generality of PNML and also standardise some of its other concepts. For example, it is planned that Part 3 will define a module concepts known from...... modular PNML and will make the concept for defining new Petri net types explicit. In this paper, discuss PNML, its relation to ISO/IEC 15909 and the main ideas for the future extensions of PNML and its standardisation in Part 3 of ISO/IEC 15909-2....

  13. RWE Power and Siemens implement IEC 61850 in power plant auxiliary power supply; RWE Power und Siemens realisieren IEC 61850 im Kraftwerkseigenbedarf

    Energy Technology Data Exchange (ETDEWEB)

    Ciuches, J. [RWE Power AG, Kraftwerksneubau Braunkohlenkraftwerke, Kraftwerk Neurath, Essen (Germany); Ostertag, R. [Siemens AG, Erlangen (Germany). Energy Sector Fossil Power Generation, Kraftwerksleittechnik/E-Technik

    2008-07-01

    RWE Power is currently building the two most modern lignite-fired generating units in the world at its Neurath site. The technical solutions are built upon the good results with the BoA technology (lignite-fired power station with optimised plant engineering) at the RWE Niederaussem power plant. One innovation is the direct integration of the electrical auxiliary power in the main C and I system technology utilising IEC61850 standards. For the first time with IEC 61850, there is a standardised Ethernet and TCP/IP based solution in power distribution systems. (orig.)

  14. Plan de implementación de la ISO/IEC 27001:2013

    OpenAIRE

    Sánchez Navarro, Félix

    2016-01-01

    En el desarrollo del proyecto se analizaron las directrices establecidas en la norma ISO/IEC 27001:2013, que especifica los requisitos necesarios para establecer, implantar, mantener y mejorar un SGSI mediante un proceso de mejora continua. In the development there were analyzed the directives established in the norm ISO/IEC27001:2013, which specifies the necessary requirements to establish, to implement, to support and to improve a SGSI by means of a process of constant improvement. En...

  15. Code Quality Evaluation Methodology Using The ISO/IEC 9126 Standard

    OpenAIRE

    Kanellopoulos, Yiannis; Antonellis, Panos; Antoniou, Dimitris; Makris, Christos; Theodoridis, Evangelos; Tjortjis, Christos; Tsirakis, Nikos

    2010-01-01

    This work proposes a methodology for source code quality and static behaviour evaluation of a software system, based on the standard ISO/IEC-9126. It uses elements automatically derived from source code enhanced with expert knowledge in the form of quality characteristic rankings, allowing software engineers to assign weights to source code attributes. It is flexible in terms of the set of metrics and source code attributes employed, even in terms of the ISO/IEC-9126 characteristics to be ass...

  16. IEC Information Bulletin, No. 45, Third Quarter 2013

    International Nuclear Information System (INIS)

    2013-12-01

    On Tuesday 17 September 2013, on the second day of the IAEA 57th General Conference, the Incident and Emergency Centre (IEC) organized a side event entitled Assessment and Prognosis during a Nuclear Power Plant Accident. This event provided an opportunity for the Secretariat to present to Member States the work that has been undertaken to achieve the requirements of the new IAEA expanded mandate during a nuclear emergency. The expanded mandate of the IAEA's role during a nuclear emergency is in line with a specific request from the IAEA Action Plan on Nuclear Safety, unanimously endorsed by IAEA Member States in 2011. The Action Plan requires the IAEA Secretariat to provide Member States, international organizations and the general public with timely, clear, factually correct, objective and easily understandable information during a nuclear emergency on its potential consequences, including analysis of available information and prognosis of possible scenarios based on evidence, scientific knowledge and the capabilities of Member States.' For the last two years, the IAEA Secretariat, in cooperation with Member States and International Organizations, has been developing a comprehensive process to provide assessment and prognosis during a nuclear emergency. Specific details on the actions that were taken in the last 24 months by the Secretariat was presented. The current direction and future path were also discussed, including the importance of having significant cooperation and collaboration with Member States to achieve and maintain a truly robust process for assessment and prognosis during any type of nuclear emergency. The presentation also included the description of challenges, such as the need for availability of technical information and clear communication of any uncertainties. Finally, the potential use of the IAEA Response and Assistance Network (RANET) in this process, as appropriate, was explained. The discussions demonstrated the importance of the

  17. IEC Information Bulletin, No. 44, Second Quarter 2013

    International Nuclear Information System (INIS)

    2013-09-01

    The latest publication in the IAEA Emergency Preparedness and Response (EPR)-series, Actions to Protect the Public in an Emergency due to Severe Conditions at a Light Water Reactor (EPR-NPP PUBLIC PROTECTIVE ACTIONS, 2013), was issued in May 2013. It is intended for those responsible for making and for acting on decisions in the event of an emergency involving actual or projected severe damage to the fuel in the reactor core or in the spent fuel pool of a light water reactor, to provide an understanding of the actions necessary to protect the public. It provides a basis for developing the tools and criteria at the preparedness stage that would be needed to take appropriate protective actions and other actions in response to an emergency. It provides guidance on: - Taking actions to protect the public based on conditions at the nuclear power plant using an emergency classification system; - Assessing environmental monitoring measurements taken after a release of radioactive material to determine if protective actions are needed; and - How to place the radiological health hazard in perspective for the public and answer key questions, such as ''Am I safe?'' and ''What do I need to do to protect myself and family?'' The publication is currently only available in English, but will soon be available in Spanish and Russian. The associated training materials will be available from the IAEA's and the Incident and Emergency Centre's websites later this year, and are also planned to be translated into other official UN languages. In addition, the IEC offers workshops on this publication at the national, regional and inter regional levels when requested by a Member State

  18. Consistent integrated automation. Optimized power plant control by means of IEC 61850; Durchgaengig automatisieren. Optimierte Kraftwerksleittechnik durch die Norm IEC 61850

    Energy Technology Data Exchange (ETDEWEB)

    Orth, J. [ABB AG, Mannheim (Germany). Geschaeftsbereich Power Generation

    2007-07-01

    Today's power plants are highly automated. All subsystems of large thermal power plants can be controlled from a central control room. The electrical systems are an important part. In future the new standard IEC 61850 will improve the integration of electrical systems into automation of power plants supporting the reduction of operation and maintenance cost. (orig.)

  19. Answering the request for emergency assistance worldwide. The Incident and Emergency Centre (IEC)

    International Nuclear Information System (INIS)

    2007-01-01

    In 2005, the IAEA announced the establishment of a fully integrated Incident and Emergency Centre (IEC). The functions of the IEC include coordinating prompt assistance to requesting States in the case of a nuclear security incident. As the global focal point for international preparedness, communication and response to nuclear and radiological incidents or emergencies irrespective of their cause, the IEC stands at the centre of coordinating effective and efficient activities worldwide. The IEC's work includes the evaluation of emergency plans and assistance in their development. The Centre also develops accident classifications based on plant conditions and supports effective communication between neighbouring countries. In addition, it develops various response procedures and facilitates national exercises on response to reactor emergencies. This includes training a broad range of IAEA staff to respond to emergencies as well as training of external experts. Response to incidents and emergencies can involve the exchange of information, provision of advice and/or the coordination of field response. In order to coordinate a global response, the IEC hosts a Response Assistance Network (RANET) under which Member States, Parties to the Emergency Conventions and relevant international organizations are able to register their response capabilities. This network aims to facilitate assistance in case of a nuclear or radiological incident or emergency in a timely and effective manner. An important component of the global emergency response system is the notification and reporting arrangements and systems operated by the IEC. The IEC operates systems that are reliable and secure. Member States, Non-Member States and international organizations have historically reported events and requests for assistance to the IAEA through the ENATOM arrangements using the ENAC web site, phone or fax. Under these arrangements, States have nominated Competent Authorities and National Warning

  20. Qualification of a Human-System Interface to Meet IEC 61513

    International Nuclear Information System (INIS)

    Malcom, Scott; Kim, Sun Ho; Macdonald, Marienna

    2011-01-01

    This paper describes the steps Atomic Energy of Canada Limited (AECL TM ) undertook to qualify its Advanced Control Centre Information System (ACCIS TM ) to meet the requirements of IEC 61513. It will address the different strategies used for software versus hardware. As well, the paper will discuss the steps that have been taken to qualify third-party commercial-off-the-shelf products that are used in conjunction with a qualified product. ACCIS is a display, monitoring and supervisory control system that is designed to be readily configurable and scalable to satisfy the display requirements for single functions or complex industrial plant systems. The ACCIS software services are configured and deployed across a distributed computing environment to meet the needs of a given implementation. From small single-node applications to large, complex, multi-node configurations, system behaviour is largely configured via data specifications. This design reduces the costs associated with development of custom software and allows the user to have greater control of behavioral attributes of the system, including data sampling and storage rates, the appearance and behaviour of displays, alarm annunciation features, and the configuration of system health checks. Utilities and regulators are demanding that these computer-based systems are developed and maintained with an appropriate amount of engineering rigor. To meet this challenge, AECL is qualifying its ACCIS HSI, which is intended for use in all future CANada Nuclear Deuterium (CANDU TM ) nuclear power plants, to meet the requirements of the International Electrotechnical Commission's (IEC) standard for instrumentation and control systems important to safety, IEC 61513. Transitioning to the IEC standards has not been without its challenges. While AECL previously used a software development model very similar to the IEC model, absorbing the volume of the IEC standards and understanding how they should be applied has been

  1. Whole greater than the parts: integrated esophageal centers (IEC) and advanced training in esophageal diseases.

    Science.gov (United States)

    Triadafilopoulos, G; Clarke, J; Hawn, M

    2017-10-01

    An integrated esophageal center (IEC) is a multidisciplinary team with expertise, skill, range, and facilities necessary to achieve optimal outcomes in patients with esophageal diseases efficiently and expeditiously. Within IEC, patients presenting with esophageal symptoms undergo a detailed clinical, functional and structural evaluation of their esophagus prior to implementation of tailored medical, endoscopic or surgical therapy. Serving as a core, the IEC clinical practice also supports research and innovation in esophageal diseases as well as public and physician education. Referrals to the unit may be primary, either from primary care or self-initiated, or secondary from other specialty practices, to reassess patients who have previously failed therapies and to manage complex or complicated cases. The fundamental goals of the IEC are to provide value for patients with esophageal diseases, streamlining complex diagnostic investigations and expediting therapies aiming at reducing costs while improving clinical outcomes, and to accelerate knowledge generation through robust interaction and cross-training across disciplines. The organization of the IEC goes beyond traditional academic and clinical silos and involves a director and administrative team coordinating faculty and fellows from both medical and surgical disciplines and supported by other clinical lines, such as radiology, pathology, etc., while it interfaces with physicians, the public, basic, translational and clinical research groups, and related industry partners. © The Authors 2017. Published by Oxford University Press on behalf of International Society for Diseases of the Esophagus. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  2. Scaling of the Inertial Electrostatic Confinement (IEC) for near-term thrusters and future fusion propulsion

    International Nuclear Information System (INIS)

    Miley, G.; Bromley, B.; Jurczyk, B.; Stubbers, R.; DeMora, J.; Chacon, L.; Gu, Y.

    1998-01-01

    Inertial Electrostatic Confinement (IEC) is a unique approach to fusion and plasma energy systems that was conceptualized in the 1960s (Hirsch 1967) and has been the focus of recent development in the 1990s (Miley et al. 1995a). In the interests of space power and propulsion systems, conceptual rocket design studies (Bussard and Jameson 1994, Miley et al. 1995b) using the IEC have predicted excellent performance for a variety of space missions, since the power unit avoids the use of magnets and heavy drives resulting in a very high, specific impulse compared to other fusion systems. In their recent survey of prior conceptual design studies of fusion rockets, Williams and Borowski (1997) found that the Bussard IEC conceptual study (the open-quotes QEDclose quotes engine) offered a thrust-to-weight ratio of 10 milli-g close-quote s, a factor of five higher than conventional magnetic confinement concepts and even slightly above anti-proton micro fission/fusion designs. Thus there is considerable motivation to study IEC concepts for eventual space applications. However, the physics feasibility of the IEC still requires experimental demonstration, and an expanded data base is needed to insure that a power unit can in fact be built. copyright 1998 American Institute of Physics

  3. Q-Scrum: una fusión de Scrum y el estándar ISO/IEC 29110

    OpenAIRE

    Pasini, Ariel C.; Esponda, Silvia; Boracchia, Marcos; Pesado, Patricia Mabel

    2013-01-01

    Se realiza una comparación de la metodología de desarrollo ágil Scrum con los requerimientos del estándar ISO/IEC 29110. Se analizan las competencias de los roles ISO/IEC 29110 versus los roles de la metodología Scrum, los documentos que exige el estándar ISO/IEC 29110 contra los documentos definidos por Scrum y las actividades definidas en el estándar ISO/IEC 29110 respecto las de Scrum. Se presenta Q-Scrum, el modelo propuesto que permite una aproximación de los desarrollos en Scrum a los r...

  4. The influence of bubble populations generated under windy conditions on the blue-green light transmission in the upper ocean: An exploratory approach

    Science.gov (United States)

    Wang, Chengan; Tan, Jianyu; Lai, Qingzhi

    2016-12-01

    The “blue-green window” in the ocean plays an important role in functions such as communication between vessels, underwater target identification, and remote sensing. In this study, the transmission process of blue-green light in the upper ocean is analyzed numerically using the Monte Carlo method. First, the effect of total number of photons on the numerical results is evaluated, and the most favorable number is chosen to ensure accuracy without excessive costs for calculation. Then, the physical and mathematical models are constructed. The rough sea surface is generated under windy conditions and the transmission signals are measured in the far field. Therefore, it can be conceptualized as a 1D slab with a rough boundary surface. Under windy conditions, these bubbles form layers that are horizontally homogeneous and decay exponentially with depth under the influence of gravity. The effects of bubble populations on the process of blue-green light transmission at different wind speeds, wavelengths, angle of incidence and chlorophyll-a concentrations are studied for both air-incident and water-incident cases. The results of this study indicate that the transmission process of blue-green light is significantly influenced by bubbles under high wind-speed conditions.

  5. Upgrading the Medical Physics Calibration Laboratory Towards ISO/IEC 17025: Radiation Standards and Calibration in Diagnostic Radiology

    International Nuclear Information System (INIS)

    Asmaliza Hashim; Muhammad Jamal Md Isa; Abd Aziz Mhd Ramli; Wan Hazlinda Ismail; Norhayati Abdullah; Shahrul Azlan Azizan; Siti Sara Deraman; Nor Azlin Azraai; Md Khairusalih Md Zin

    2010-01-01

    Calibration of quality control (QC) test tools used in diagnostic radiology is legally required under the Ministry of Health (MOH) requirement. The Medical Physics Calibration Laboratory of the Malaysian Nuclear Agency is the national focal point for the calibration of quality control test tools used in diagnostic radiology. The Medical Physics Calibration Laboratory has measurement traceability to primary standard dosimetry laboratory (Physikalisch-Technische Bundesanstalt (PTB)), thus providing an interface between the primary standard dosimetry laboratory and Malaysian hospitals, clinics and license class H holder. The Medical Physics Calibration Laboratory facility is comprised of a constant potential x-ray system with a capability of 160 kV tube and a series of reference and working standard ion chambers. The stability of reference and working standard ion chambers was measured using strontium-90. Dosimetric instruments used in diagnostic radiology is calibrated in terms of air kerma to comply with an International Code of Practices of dosimetry for example IAEA's Technical Report Series number 457. The new series of standard radiation qualities was established based on ISO/IEC 61267. The measurement of beam homogeneity was measured using film and ion chamber to define the field size at certain distance and kV output was measured using the spectrometer and non-invasive kVp meter. The uncertainties measurement was determined with expended uncertainties to a level of confidence of approximately 95% (coverage factor k=2). This paper describes the available facility and the effort of the Medical Physics Calibration Laboratory to upgrade the laboratory towards ISO/IEC 17025. (author)

  6. Implementation and Validation of IEC Generic Type 1A Wind Turbine Generator Model

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei; Margaris, Ioannis

    2015-01-01

    This paper presents the implementation of the International Electrotechnical Commission (IEC) generic Type 1A wind turbine generator (WTG) model in Power Factory (PF) and the validation of the implemented model against field measurements. The IEC generic Type 1A WTG model structure is briefly...... measurement validation of the implemented model was carried out by using the “play-back” approach and the measurement data from Siemens Wind Power. The results of the model to field measurement validation show that there is a good match between the simulation results and the measurements. The errors between...... described. The details are explained regarding how the two mass mechanical model is implemented when the generator mass is included in the PF built-in generator model. In order to verify the IEC generic Type 1A WTG model, the model to field measurement validation method was employed. The model to field...

  7. Improving the quality control program for patient dose calibrator according to IEC 60580

    International Nuclear Information System (INIS)

    Costa, Nathalia Almeida; Potiens, Maria da Penha Albuquerque

    2013-01-01

    The objective of this work was to improve the program quality control of this equipment based on the International Standard IEC 60580 - Medical electrical equipment - Dose area product meters . The initial program was established following the recommendations of IEC 61674 quoting dosimeters with ionization chambers and / or semiconductor detectors used in diagnostic X-ray image, however, the IEC 60580 is referred specifically to gauges and KAP (kerma-area product) presents additional tests. Tests included: intrinsic relative error, repeatability, scanning resolution, settling time, restarting, float values, response time and spatial uniformity of response. As a rule, all measurements are within the range characteristic of equipment performance. Thus, the PDC (Patient Dose Calibrator) again shows a device with excellent functionality and reliability in characterization tests carried out to quality control as( for the test in clinical PKA meters

  8. OpenIEC61850 -kirjaston käyttöönotto

    OpenAIRE

    Selkäinaho, Sami

    2015-01-01

    Tämän opinnäytetyön tarkoituksena oli tehdä työ, jossa tutkitaan IEC 61850 -standardia sekä siihen perustuvan OpenIEC61850 -kirjaston käyttöä. Työ on tehty Vaasan ammattikorkeakoululle. Toissijaisena tehtävänkuvana on ollut, että koulu voisi käyttää työn osia opetusmateriaalina koulutuksessa. IEC 61850 on sähköautomaatiossa käytettävä tiedonsiirtostandardi. Se tarjoaa standardisoidun tavan ilmaista koko sähköaseman toiminnallisuutta. Tämän ansiosta eri valmistajien laitteet voivat kommunikoid...

  9. Competence Requirements of ISO/IEC Standards for Information Security Professionals

    Directory of Open Access Journals (Sweden)

    Natalia G. Miloslavskaya

    2017-11-01

    Full Text Available The rapid progress in the filed of information security (IS puts one in a need of periodic revision of professional competencies (formulated in the federal state educational standards –FSESs and working functions (formulated in the professional standards – PSs. Under these conditions, a timely reaction to everything new that emerges or will appear in modern regulatory documents (primarily in standards is extremely important. We make a forecast for the content of the ISO/IEC 27021 and ISO/IEC 19896 standards drafted by the International Organization for Standardization (ISO, which should contain the requirements for the competencies of IS management system professionals and the competence of IS testers and evaluators. Our forecast takes into account the requirements of the ISO/IEC 27000 standard group and the recommendations of the European e-Competence Framework e-CF 3.0.

  10. Type tests performed on a personnel dosimetry system according to IEC 61066

    International Nuclear Information System (INIS)

    Castillo, Romel; Huamanlazo, Paula; Rojas, Enrique

    2015-01-01

    In this study, the verification of the Harshaw 6600 Plus TLD personal dosimetry system was made using the method of the IEC-61066 type tests and the recommendations of the ISO 4037 standards. For this purpose, five dosimeters were irradiated over a water phantom using an irradiator with a 137 Cs source; five dosimeters as control were also used. The evaluated parameters were homogeneity, detection limit, residual reading, linearity, reproducibility, droppings and temperature and humidity variations. The obtained results show that the Harshaw 6600 TLD dosimetric system fulfills the IEC 61066 criteria. (author)

  11. Plan de implementación de la norma ISO/IEC 27001:2013

    OpenAIRE

    Cárdenas Restrepo, Juan Manuel

    2014-01-01

    El objetivo de este trabajo es elaborar un plan de implementación de la ISO/IEC 27001 en la organización seleccionada. El proyecto establecerá las bases para la implementación de un SGSI. L'objectiu d'aquest treball és elaborar un pla d'implementació de la ISO/IEC 27001 en l'organització seleccionada. El projecte establirà les bases per a la implementació d'un SGSI. Master thesis for the ICT Security management program.

  12. Modelling of plug and play interface for energy router based on IEC61850

    Science.gov (United States)

    Shi, Y. F.; Yang, F.; Gan, L.; He, H. L.

    2017-11-01

    Under the background of the “Internet Plus”, as the energy internet infrastructure equipment, energy router will be widely developed. The IEC61850 standard is the only universal standard in the field of power system automation which realizes the standardization of engineering operation of intelligent substation. To eliminate the lack of International unified standard for communication of energy router, this paper proposes to apply IEC61850 to plug and play interface and establishes the plug and play interface information model and information transfer services. This paper provides a research approach for the establishment of energy router communication standards, and promotes the development of energy router.

  13. Field Validation of IEC 61400-27-1 Wind Generation Type 3 Model with Plant Power Factor Controller

    DEFF Research Database (Denmark)

    Göksu, Ömer; Altin, Müfit; Fortmann, Jens

    2016-01-01

    Generic electrical simulation models of wind power generation have been developed as standards, such as the IEC 61400-27-1, to be used by wind industry, system operators, and academia for power system stability studies. In this paper, the IEC type 3 wind turbine model with wind turbine level...

  14. Plan de implementación de un SGSI acorde a la norma ISO/IEC 27001:2005

    OpenAIRE

    Álvarez Verdugo, Joaquín

    2014-01-01

    Plan de implementación de un SGSI acorde a la norma ISO/IEC 27001:2005 en un organismo público municipal. Pla d'implementació d'un SGSI d'acord amb la norma ISO/IEC 27001:2005 en un organisme públic municipal. Master thesis for the ICT Security management program.

  15. Compatibility of IEC 61400-27-1 Ed 1 and WECC 2nd Generation Wind Turbine Models

    DEFF Research Database (Denmark)

    Göksu, Ömer; Sørensen, Poul Ejnar; Morales, Ana

    2016-01-01

    The IEC TC88 WG27 and the Western Electric Coordinating Council (WECC) Renewable Energy Modeling Task Force, in North America, have been developing the IEC 61400-27-1 and WECC 2nd Generation Wind Turbine generic electrical models, where the first editions are published in 2014 and 2013...

  16. Implementation and Practical Benefits of ISO/IEC 17025:2005 in a ...

    African Journals Online (AJOL)

    User

    the ISO/IEC 17025 standard, is also acquiring steady acceptance in local companies. The Mauritius Accreditation Service (MAURITAS) is the organisation ..... A CRM is a sample for which the values are known and recognised on an international level. Laboratories generally use CRMs for periodic performance checks of ...

  17. Reliability Prediction Approaches For Domestic Intelligent Electric Energy Meter Based on IEC62380

    Science.gov (United States)

    Li, Ning; Tong, Guanghua; Yang, Jincheng; Sun, Guodong; Han, Dongjun; Wang, Guixian

    2018-01-01

    The reliability of intelligent electric energy meter is a crucial issue considering its large calve application and safety of national intelligent grid. This paper developed a procedure of reliability prediction for domestic intelligent electric energy meter according to IEC62380, especially to identify the determination of model parameters combining domestic working conditions. A case study was provided to show the effectiveness and validation.

  18. Leveraging Software Architectures through the ISO/IEC 42010 standard: A Feasibility Study

    NARCIS (Netherlands)

    Tamburri, D.A.; Lago, P.; Muccini, H.; Proper, E.; Lankhorst, M.; Schoenherr, M.

    2011-01-01

    The state of the practice in enterprise and software architecture learnt that relevant architectural aspects should be illustrated in multiple views, targeting the various concerns of different stakeholders. This has been expressed a.o. in the ISO/IEC 42010 Standard on architecture descriptions. In

  19. Internal Audit Status For ISO 9001 And ISO/ IEC 17025 In Malaysian Nuclear Agency

    International Nuclear Information System (INIS)

    Fazila Said; Nurul Huda Mudri; Nik Arlina Ali

    2012-01-01

    The development of MS ISO 9001 and MS ISO/ IEC 17025 in Malaysian Nuclear Agency is the basic step to enhance and improve the Quality Management System (QMS) for processes and laboratories that involve customers and suppliers in delivering products and services. The effectiveness of QMS is monitored by Research and Innovation Management Centre (RIMC) to ensure that all activities related to audit such as Internal Audit are well organized and implemented as documented in quality manual and procedure. This paper will discuss the status of internal audit for processes that implement MS ISO 9001 and laboratories that accredited with MS/ ISO IEC 17025 in year 2008, 2009 and 2010. The total of non-conformance (nc) and opportunity for improvement (ofi) for processes and laboratories and their numbers as per clause in MS ISO 9001 and MS ISO/ IEC 17025 are the indicators that reflects the effectiveness of QMS. Then, the total effectiveness of QMS for MS 9001 and MS ISO/ IEC 17025 is also determined via the number of conformance clause versus non-conformance clause for those three years. (author)

  20. Implementation and Practical Benefits of ISO/IEC 17025:2005 in a ...

    African Journals Online (AJOL)

    ISO/IEC 17025:2005 – General Requirements for the Competence of Testing and Calibration Laboratories is the standard used for laboratory accreditation. An evaluation and comparison of the quality system in a case study laboratory, XYZ Laboratory, to the quality management system of an accredited laboratory showed ...

  1. Information Reliability in Smart Grid Scenario over Imperfect Communication Networks using IEC-61850 MMS

    DEFF Research Database (Denmark)

    Umair, Rafia; Shahid, Kamal; Olsen, Rasmus Løvenstein

    2017-01-01

    information reliability and evaluate the performance of a controller. Therefore, considering the dynamic nature of information, this paper analyzes the information reliability in terms of correct and timely delivery of message signals, for remote control of a WPP using IEC-61850 MMS in a smart grid scenario...

  2. Modular structure of wind turbine models in IEC 61400-27-1

    DEFF Research Database (Denmark)

    Sørensen, Poul Ejnar; Andresen, Bjørn; Fortmann, Jens

    2013-01-01

    This paper presents the modular structure of wind turbine models to be published in a new standard IEC 61400-27 for “Electrical simulation models for wind power generation”. The purpose of this standardization work is to define generic simulation models for wind turbines (Part 1) and wind power p...

  3. Tunneling Horizontal IEC 61850 Traffic through Audio Video Bridging Streams for Flexible Microgrid Control and Protection

    Directory of Open Access Journals (Sweden)

    Michael Short

    2016-03-01

    Full Text Available In this paper, it is argued that some low-level aspects of the usual IEC 61850 mapping to Ethernet are not well suited to microgrids due to their dynamic nature and geographical distribution as compared to substations. It is proposed that the integration of IEEE time-sensitive networking (TSN concepts (which are currently implemented as audio video bridging (AVB technologies within an IEC 61850 / Manufacturing Message Specification framework provides a flexible and reconfigurable platform capable of overcoming such issues. A prototype test platform and bump-in-the-wire device for tunneling horizontal traffic through AVB are described. Experimental results are presented for sending IEC 61850 GOOSE (generic object oriented substation events and SV (sampled values messages through AVB tunnels. The obtained results verify that IEC 61850 event and sampled data may be reliably transported within the proposed framework with very low latency, even over a congested network. It is argued that since AVB streams can be flexibly configured from one or more central locations, and bandwidth reserved for their data ensuring predictability of delivery, this gives a solution which seems significantly more reliable than a pure MMS-based solution.

  4. A fully automated system for ultrasonic power measurement and simulation accordingly to IEC 61161:2006

    NARCIS (Netherlands)

    Costa-Felix, R.P.B.; Alvarenga, A.V.; Hekkenberg, R.

    2011-01-01

    The ultrasonic power measurement, worldwide accepted, standard is the IEC 61161, presently in its 2nd edition (2006), but under review. To fulfil its requirements, considering that a radiation force balance is to be used as ultrasonic power detector, a large amount of raw data (mass measurement)

  5. On the problems regarding the risk calculation used in IEC 62305

    Energy Technology Data Exchange (ETDEWEB)

    Gellen, T B; Szedenik, N; Kiss, I; Nemeth, B, E-mail: szedenik.norbert@vet.bme.hu [Budapest University of Technology and Economics, Egry J.u.18, Budapest (Hungary)

    2011-06-23

    The 2nd part of the international standard on lightning protection (IEC 62305) deals with risk management. The explanations of the mathematical principles and the basic terms of this part facilitate the proper application of the standard. This paper gives additional information for better understanding of the standard and highlights some issues that might occur in its practical application.

  6. Use of the TEM Cell for Compliance Testing of Emissions and Immunity, an IEC Perspective

    DEFF Research Database (Denmark)

    Bentz, Sigurd

    1996-01-01

    The current work of the IEC on preparing a standard for the use of TEM cells for compliance testing of emissions and immunity is reviewed. The requirements of TEM cells are related to the established procedures: “open area test site” and “shielded enclosure with area of uniform field”, respectively...

  7. Evolution of IEC/TC 45 works and its sub-committees from 1960 to 1983

    International Nuclear Information System (INIS)

    Weill, J.

    1983-10-01

    The IEC, founded in 1906, is an independent international standards organization. Its standardization work deals with almost all branches of electrotechnology in the electrotechnical, electronical and data-processing field, covering all applications, as for example telecommunications and nuclear energy. The IEC Central Office is situated in Geneva (Switzerland). The Technical Committee No. 45 was set up in 1960 at the IEC general meeting in New Delhi, with the scope as given in the IEC Directory. Its revised scope is under consideration in the Committee of Action of the IEC and reads: ''To prepare international standards relating to electrical and electronic equipment and systems specific to nuclear applications''. The chart shows the organigram of the Technical Committee which comprises about 75 experts in the nuclear field from about 20 industrial countries. We can see here the standard diagram of a Technical Committee with its Sub-committees and Working Groups. The meetings are held in a member country at the request of its National Committee. One shows the places of the plenary meetings of TC 45 as well as the meetings of its Sub-committees and their Working Groups held till now. The Technical Committee 45 has in addition to its seven Working Groups also two Sub-committees having several further Working Groups of their own. The Sub-committee 45 A ''Reactor Instrumentation''. The Sub-committee 45 B ''Radiation protection instrumentation''. Till now TC 45 has published about 85 standards. Regarding work in preparation, one shows the present and future work within the Technical Committee and its Sub-committees. Impact of works and liaisons is briefly discussed [fr

  8. Wind Plant Models in IEC 61400-27-2 and WECC - latest developments in international standards on wind turbine and wind plant modeling

    DEFF Research Database (Denmark)

    Fortmann, Jens; Miller, Nicholas; Kazachkov, Yuri

    This paper describes the latest developments in the standardization of wind plant and wind plant controller models. As a first step IEC TC88 WG 27 and WECC jointly developed generic wind turbine models which have been published by WECC in 2014 and IEC in 2015 as IEC 61400-27-1, which also include...

  9. X radiation qualities characterization following the standard IEC 61267 recommendations at the calibration laboratory of IPEN

    International Nuclear Information System (INIS)

    Franciscatto, Priscila Cerutti

    2009-01-01

    This work presents a methodology for the X radiation qualities characterization following the new recommendations of the standard 61267 of the International Electrotechnical Commission (IEC) to establish a new procedure for calibration of dosimetric systems used in the field of diagnostic radiology. The reference qualities radiation of IEC 61267: RQR 2 to RQR 10, RQA 2 to RQA 10, RQB 2 to RQB 10 and RQN 2 to RQN 10 were implanted at the calibration laboratory of IPEN (LCI). Their characteristics were analyzed through measurements of beam parameters such as: Practical peak voltage (PPV), specific additional filtrations for each qualities (high purity aluminum of about 99.9%), 1st and 2nd Half Value Layers, homogeneity coefficient. The inherent filtration of the X ray tube was also determined. With the establishment of these radiation qualities, the LCI will be ready to calibrate the measuring instruments of radiation in the new qualities, allowing an improvement in radiological services offered by IPEN. (author)

  10. Wind power communication design and implementation of test environment for IEC61850/UCA2

    Energy Technology Data Exchange (ETDEWEB)

    Johnsson, A.; Svensson, J.

    2002-04-01

    Elforsk has sponsored a joint Swedish-Danish project aiming at finding and recommend a common solution for communication with wind power plants. The first stage of the work resulted in a requirement specification Functional Requirements on Communication System for Wind Turbine Applications. During the project a number of possible communication solutions were identified. The two most promising solutions have been tested in order to verify to what extent they fulfil the requirements in the specification. A version of the IEC 61850 standard based on the communication protocol MMS, has been tested at a wind power plant at Gotland, Sweden, and an OPC-interface has been tested in Denmark. This report includes a description of the design choices made for the test implementation of MMS, as well as a detailed description of the implementation of the IEC 61850/UCA2 software including information models and information exchange services. (BA)

  11. Control and management of distribution system with integrated DERs via IEC 61850 based communication

    Directory of Open Access Journals (Sweden)

    Ikbal Ali

    2017-06-01

    Full Text Available Distributed Energy Resources (DERs are being increasingly integrated in the distribution systems and resulting in complex power flow scenarios. In such cases, effective control, management and protection of distribution systems becomes highly challenging. Standardized and interoperable communication in distribution systems has the potential to deal with such challenges to achieve higher energy efficiency and reliability. Ed. 2 of IEC 61850 standards, for utility automation, standardizing the exchange of data among different substations, DERs, control centers, PMUs and PDCs. This paper demonstrates the modelling of information and services needed for control, management and protection of distribution systems with integrated DERs. This paper has used IP tunnels and/or mapping over IP layer for transferring IEC 61850 messages, such as sample values (SVs and GOOSE (Generic Object Oriented Substation Event, over distribution system Wide Area Network (WAN. Finally performance of the proposed communication configurations for different applications is analyzed by calculating End-to-End (ETE delay, throughput and jitter.

  12. Analysis of Norm IEC 61850 in the transmission of data via communications network of substations

    Energy Technology Data Exchange (ETDEWEB)

    Renda, T.; Botura Junior, G. [Universidade Estadual Paulista (UNESP), Sorocaba, SP (Brazil); Mesquita, L.; Rizol, P.M.S.R. [Universidade Estadual Paulista (UNESP), Guaratingueta, SP (Brazil)

    2009-07-01

    The tendency of using a protocol allows electrical substations to become 'intelligent', that is, capable of communicating in a much more efficient manner. This greatly reduces the number of connections, and as a consequence optimizes the speed between messages. The Norm IEC 61850-9-2 came to minimize the use of cables for the interconnections of various equipment involved in safety procedures of a substation. The present paper, has the objective of identifying a way of integrating the Norm IEC-61850 with the transmission of data via 'Generic Object Oriented Substation Event' (GOOSE) and of substituting the direct connection of binary I/O's of the Intelligent Electronic Devices also known as IED's. (author)

  13. Architectural constraints in IEC 61508: Do they have the intended effect?

    International Nuclear Information System (INIS)

    Lundteigen, Mary Ann; Rausand, Marvin

    2009-01-01

    The standards IEC 61508 and IEC 61511 employ architectural constraints to avoid that quantitative assessments alone are used to determine the hardware layout of safety instrumented systems (SIS). This article discusses the role of the architectural constraints, and particularly the safe failure fraction (SFF) as a design parameter to determine the hardware fault tolerance (HFT) and the redundancy level for SIS. The discussion is based on examples from the offshore oil and gas industry, but should be relevant for all applications of SIS. The article concludes that architectural constraints may be required to compensate for systematic failures, but the architectural constraints should not be determined based on the SFF. The SFF is considered to be an unnecessary concept

  14. Comparative study on implementation of management requires from ABNT NBR ISO/IEC 17025

    International Nuclear Information System (INIS)

    Suplino Filho, Carlos Alberto Lucas; Souza, Luciane de Rezende; Oliveira, Estela Maria de

    2014-01-01

    This work was developed in order to emphasize the importance of laboratory management system in the direction and control of the company or institute with regard to the quality of delivery of ionizing radiation service to society. It was developed a comparative study of managerial points of Deming with the managerial requirements of ISO / IEC 17025, which found that the difficulties of the laboratories indicated by nonconformities tracked during audits, are related to specific points cited by Deming. (author)

  15. Efficiency increase of a high-efficient IEC 3 kW permanent-magnet-motor - Implementation in a pump system; Effizienzsteigerung eines hocheffizienten IEC 3 kW Permanent-Magnet-Motors inklusiv energetische Messung als Pumpenanwendung - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Lindegger, M. [Circle Motor AG, Guemligen (Switzerland); Biner, H.-P.; Evequoz, B. [University of Applied Sciences, Western Switzerland, Delemont (Switzerland); Salathe, D. [Fachhochschule Luzern, Technik und Architektur, Horw (Switzerland)

    2009-11-15

    The IEC norm 60034-30 defines new international standards for efficiency of electric motors. IE1 is standard efficiency, IE2 is high efficiency, and IE3/IE4 are the premium class. Circle Motor AG assumes that the premium class efficiency factor for motors with power less than 22 kW is easier to achieve with Permanent-Magnet-Motors enhanced by electric inverters than with asynchronous motors. The goal of this work is to achieve an overall 'efficiency factor' of 90% through a high-efficiency 3 kW-rated input Permanent-Magnet-Motor enhanced with an electric inverter, and then to perform measurements on the pump drive. The 'efficiency factor' measurement results showed worse performance than expected for both the inverter and the motor. One reason is due to high iron losses in the motor that are produced by high frequency currents of inverter. Another reason is the relatively high ohmic resistance of the copper motor winding caused by the chosen coil production method. By filtering high frequency currents at the rated power, the motor efficiency factor reaches up to 89.5%, which complies with premium class IE3. In generator mode the efficiency reaches 92.8%. We note that the positive result of this work is that the inverter can be produced with very low standby power losses - in our current work with 160 mW. It is necessary to admit that every detail can be responsible for success or failure during research and development activities of premium class motors. The optimization activities mainly belong to the area of additional losses of electric machines. In this report we have encountered all research results on the theme of Additional Losses that resulted from the current research work. The concept of drive control from the previous research project has shown itself as efficiency aware. The total efficiency factor of 90% can be reached by a system coupling a drive controller with a synchronous motor and the 'know how' from this work. The

  16. Jefferson Lab IEC 61508/61511 Safety PLC Based Safety System

    Energy Technology Data Exchange (ETDEWEB)

    Kelly Mahoney, Henry Robertson

    2009-10-01

    This paper describes the design of the new 12 GeV Upgrade Personnel Safety System (PSS) at the Thomas Jefferson National Accelerator Facility (TJNAF). The new PSS design is based on the implementation of systems designed to meet international standards IEC61508 and IEC 61511 for programmable safety systems. In order to meet the IEC standards, TJNAF engineers evaluated several SIL 3 Safety PLCs before deciding on an optimal architecture. In addition to hardware considerations, software quality standards and practices must also be considered. Finally, we will discuss R&D that may lead to both high safety reliability and high machine availability that may be applicable to future accelerators such as the ILC. Key words: PLC, Safety, TJNAF, SIL, PSS, PPS, Software, ILC Notice: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes.

  17. A new 3D finite element model of the IEC 60318-1 artificial ear

    Science.gov (United States)

    Bravo, Agustín; Barham, Richard; Ruiz, Mariano; López, Juan Manuel; DeArcas, Guillermo; Recuero, Manuel

    2008-08-01

    The artificial ear specified in IEC 60318-1 is used for the measurement of headphones and has been designed to present an acoustic load equivalent to that of normal human ears. In this respect it is specified in terms of an acoustical impedance, and modelled by a lumped parameter approach. However, this has some inherent frequency limitations and becomes less valid as the acoustic wavelength approaches the characteristic dimensions within the device. In addition, when sound propagates through structures such as narrow tubes, annular slits or over sharp corners, noticeable thermal and viscous effects take place causing further departure from the lumped parameter model. A new numerical model has therefore been developed, which gives proper consideration to the aforementioned effects. Both kinds of losses can be simulated by means of the LMS Virtual Lab acoustic software which facilitates finite and boundary element modelling of the whole artificial ear. A full 3D model of the artificial ear has therefore been developed based on key dimensional data found in IEC 60318-1. The model has been used to calculate the acoustical impedance, and the results compared with the corresponding data determined from the lumped parameter model. The numerical simulation of the artificial ear has been shown to provide realistic results, and is a powerful tool for developing a detailed understanding of the device. It is also proving valuable in the revision of IEC 60318-1 that is currently in progress.

  18. Progress in IEC 61400-27. Electrical simulation models for wind power generation

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, Poul [DTU Wind Energy, Roskilde (Denmark); Andresen, Bjoern; Bech, John [Siemens Wind Power, Brande (Denmark). Electrical Systems and Generators; Fortmann, Jens [REpower Systems AG, Osterroenfeld (Germany). Wind Power Plant; Pourbeik, Pouyan [Electric Power Research Institute, Inc. (EPRI), Knoxville, TN (United States). Grid Operations and Planning

    2012-07-01

    This paper presents the status of the ongoing work in IEC Technical Committee 88 Working Group 27 (TC88 WG27) developing a standard IEC 61400-27 for ''Electrical simulation models for wind power generation''. The purpose of this standardization work is to define generic simulation models for wind turbines (part 1) and wind power plants (part 2), which are intended for short-term power system stability analyses. WG27 submitted the first CD of Part 1 in December 2012. The CD describes generic wind turbine models and a procedure for validation of wind turbine models. The generic model description consists of a general model structure intending to cover existing as well as future types of wind turbines, and specific fundamental frequency positive sequence models for the four wind turbine types which are widely used today. The validation procedure can be applied to the generic models specified in the standard, or to manufacturer specific fundamental frequency models. The paper will provide a general description of the wind turbine models, a more detailed description of type 4 models, a description of the validation procedure and finally a validation example. Part 2 is in an early stage of development. IEC has approved the New Work Item Proposal (NWIP) of part 2, and this work has officially started 1 October 2012. (orig.)

  19. Implementing IEC 61850-7-420 DER Logical Nodes in a single board

    Directory of Open Access Journals (Sweden)

    Anderson Salazar-Zuluaga

    2017-09-01

    Full Text Available This article discusses the implementation of a variety of logical nodes (LNs of power generation systems based on distributed energy resources (DER in a single board computer (SBC. The SBC allows for the acquisition and encapsulation of analog signals from a photovoltaic (PV array with batteries, based on the IEC 61850-7-420 standard. To achieve this, an SBC integrated with an analog-digital conversion card (ADC enables to read the system’s analog values. The SBC communicates with the ADC card to encapsulate the collected data in the IEC 61850 data object by using the corresponding logical node (LN. An open license library was used to create the IEC 61850 server inside the SBC and the driver of the ADC card manufacturer to communicate both cards. This work aims to develop LNs for DERs in such way that manufacturers of power generation technologies based on renewable sources (such as the sun and/or the wind implement Intelligent Electronic Devices (IED and controllers in accordance with the scope of the standard for these logical nodes (LNs. Finally, the communication testing of the implementation and the results obtained are presented.

  20. Maturity index on reliability: covering non-technical aspects of IEC61508 reliability certification

    International Nuclear Information System (INIS)

    Brombacher, A.C.

    1999-01-01

    One of the more recent developments in the field of reliability and safety is the realisation that these aspects are not only a function of the product itself, but also of the organisation realising this product. A second development is a trend from an often predominantly qualitative analysis towards a quantitative analysis. In contrast to the (older) DIN 0801, the (more recent) IEC61508 requires, on product level, also a quantitative analysis and, on organisational level, an assessment of the lifecycle of a product by analysing the (maturity of the) relevant business processes (DIN V VDE 0801. Grundsaetze fuer Rechner in Systemen mit Sicherheitsaufgaben, 1990; DIN V 0801. Grundlegende Sicherheitsbetrachtungen fuer MSR-Schutzeinrichtungen, 1994; DIN V VDE 0801 A1. Grundsaetze fuer Rechner in Systemen mit Sicherheitsaufgaben, Aenderung A1, 1994; IEC 61508 Functional Safety of electrical/electronic/programmable electronic safety-related systems, draft 4.0, 1997). The IEC standard 61508 covers: (i) technical aspects, both on a quantitative and a qualitative level; (ii) organisational aspects, both on aspects of maturity of business processes (quantitative) and on aspects of the definition and application of procedures (qualitative). This paper shows the necessity for an analysis on all aspects in a safety certification process, and presents an overview of the available tools and techniques for the various quadrants. As methods and tools for especially quadrant C are currently unavailable, this paper will propose a method to assess and improve the maturity of an organisation on reliability management: the maturity index on reliability (MIR)

  1. The common information model CIM IEC 61968/61970 and 62325 : a practical introduction to the CIM

    CERN Document Server

    Uslar, Mathias; Rohjans, Sebastian; Trefke, Jörn; Vasquez Gonzalez, Jose Manuel

    2012-01-01

    Within the Smart Grid, the combination of automation equipment, communication technology and IT is crucial. Interoperability of devices and systems can be seen as the key enabler of smart grids. Therefore, international initiatives have been started in order to identify interoperability core standards for Smart Grids.   IEC 62357, the so called Seamless Integration Architecture, is one of these very core standards, which has been identified by recent Smart Grid initiatives and roadmaps to be essential for building and managing intelligent power systems. The Seamless Integration Architecture provides an overview of the interoperability and relations between further standards from IEC TC 57 like the IEC 61970/61968: Common Information Model - CIM.   CIM has proven to be a mature standard for interoperability and engineering; consequently, it is a cornerstone of the IEC Smart Grid Standardization Roadmap. This book provides an overview on how the CIM developed, in which international projects and roadmaps is h...

  2. Lutein Protects against Methotrexate-Induced and Reactive Oxygen Species-Mediated Apoptotic Cell Injury of IEC-6 Cells

    Science.gov (United States)

    Chang, Chi-Jen; Lin, Ji-Fan; Chang, Hsun-Hsien; Lee, Gon-Ann; Hung, Chi-Feng

    2013-01-01

    Purpose High-dose chemotherapy using methotrexate (MTX) frequently induces side effects such as mucositis that leads to intestinal damage and diarrhea. Several natural compounds have been demonstrated of their effectiveness in protecting intestinal epithelial cells from these adverse effects. In this paper, we investigated the protection mechanism of lutein against MTX-induced damage in IEC-6 cells originating from the rat jejunum crypt. Methods The cell viability, induced-apoptosis, reactive oxygen species (ROS) generation, and mitochondrial membrane potential in IEC-6 cells under MTX treatment were examined in the presence or absence of lutein. Expression level of Bcl2, Bad and ROS scavenging enzymes (including SOD, catalase and Prdx1) were detected by quantitative RT-PCR. Results The cell viability of IEC-6 cells exposed to MTX was decreased in a dose- and time-dependent manner. MTX induces mitochondrial membrane potential loss, ROS generation and caspase 3 activation in IEC-6 cells. The cytotoxicity of MTX was reduced in IEC-6 cells by the 24 h pre-treatment of lutein. We found that pre-treatment of lutein significantly reduces MTX-induced ROS and apoptosis. The expression of SOD was up-regulated by the pre-treatment of lutein in the MTX-treated IEC-6 cells. These results indicated that lutein can protect IEC-6 cells from the chemo-drugs induced damage through increasing ROS scavenging ability. Conclusion The MTX-induced apoptosis of IEC-6 cells was shown to be repressed by the pre-treatment of lutein, which may represent a promising adjunct to conventional chemotherapy for preventing intestinal damages. PMID:24039779

  3. Compatibility of IEC 61400-27-1 Ed 1 and WECC 2nd Generation Wind Turbine Models

    OpenAIRE

    Göksu, Ömer; Sørensen, Poul Ejnar; Morales, Ana; Weigel, Stefan; Fortmann, Jens; Pourbeik, Pouyan

    2016-01-01

    The IEC TC88 WG27 and the Western Electric Coordinating Council (WECC) Renewable Energy Modeling Task Force, in North America, have been developing the IEC 61400-27-1 and WECC 2nd Generation Wind Turbine generic electrical models, where the first editions are published in 2014 and 2013, respectively. Although the two working groups have been collaborating closely, there are small differences between the approaches of the two modelling standards, especially in terms of parameter sets and compl...

  4. Implementation of draft IEC Generic Model of Type 1 Wind Turbine Generator in PowerFactory and Simulink

    OpenAIRE

    Zhao, Haoran; Wu, Qiuwei; Sørensen, Poul Ejnar; Bech, John; Andresen, Bjørn

    2013-01-01

    This paper presents the implementation work of IEC generic model of Type 1 wind turbine generator (WTG) in two commercial simulation tools: DIgSILENTPowerFactory (PF) and Matlab Simulink. The model topology, details of the composite blocks and implementation procedure in PF and Simulink environments are described. Case studies under both normal and fault conditions have been conducted with the implemented IEC Type 1 WTG model. The dynamicresponses are captured and analyzed. The simulation res...

  5. Implementasi Iso/iec 27001:2013 Untuk Sistem Manajemen Keamanan Informasi (Smki) Pada Fakultas Teknik Uika-bogor

    OpenAIRE

    Ritzkal, Ritzkal; Goeritno, Arief; Hendrawan, A. Hendri Hendrawan

    2016-01-01

    Telah dilakukan analisis terhadap sistem manajemen keamanan informasi pada lingkungan Fakultas Teknik Universitas Ibn Khaldun (UIKA) Bogor berdasarkan ISO/IEC 27001: 2013 Klausal 11 Kontrol Akses. Standardisasi ISO/IEC 27001:2013, adalah suatu standar berkenaan dengan Sistem Manajemen Keamanan Informasi (SMKI, ISMS: Information Security Management System) yang dipublikasikan pada 25 September 2013. Sistem Manajemen Keamanan Informasi (SMKI), adalah pendekatan sistematis untuk pengelolaan ...

  6. TU-G-213-02: IEC Subcommittee 62B (Diagnostic Imaging Equipment): Recent and Active Projects

    International Nuclear Information System (INIS)

    Supanich, M.

    2015-01-01

    The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetric safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists

  7. Methodology to establish the profile that defines a meta-specification that applies to distribution substations - Mexico case based on norm IEC-61850; Metodologia para establecer el perfil que define una meta-especificacion que aplica a subestaciones de distribucion -caso Mexico- basada en la norma IEC-61850

    Energy Technology Data Exchange (ETDEWEB)

    Picazo Blanquel, Cuitlahuac; Chairez Campos Carlos; Garcia Hernandez, Joaquin; Godinez Enriquez, Hebert; Poujol Galvan, Francisco C.; Suarez Cerda, Dionisio A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Villalobos Ramos, Andres; LLamas Gonzalez, Rosa E. [Comision Federal de Electricidad (Mexico); Samitier Otero, Carlos [Global Networking Engineering (Spain)

    2010-07-01

    In this article is presented a case of study of automation of electrical substations of Comision Federal de Electricidad (CFE) of Mexico, in which the Norm IEC-61850 has been taken as reference. The case of study consists of defining a metaspecification for the protection, control, measurement and communication systems required by the substations of electrical distribution. For the development the obtained previous experience in the development of a bequeathed system SA, norm IEC61850 has been taken as reference, as well as the experiences documented in the Instituto de Investigaciones Electricas (IIE), the Comision Federal de Electricidad (CFE) and Global Networking Engineering (GNE), Spain. This way, the obtained result is the metaspecification, which establishes the application of the control, protective equipment and measurement under the interoperability concepts, as well as the automation functions of substations applied in the intelligent networks (REI's). The methodology put into practice includes the design of the system architecture (SAS), the operation philosophy, the topology of the communications network, the data modeling one with logical nodes that include data types and classes of common data (CDC), transference of information, and administration of the archives ICD, SSD, SCD, and CID. [Spanish] En este articulo se presenta un caso de estudio de automatizacion de subestaciones electricas de la Comision Federal de Electricidad (CFE) de Mexico, en el cual se ha tomado como referencia la norma IEC-61850. El caso de estudio consiste en definir una metaespecificacion para los sistemas proteccion, control, medicion y comunicaciones requeridos por las subestaciones de distribucion electrica. Para el desarrollo se ha tomado como referencia la experiencia previa obtenida en el desarrollo de un sistema SA legado, la norma IEC61850, asi como las experiencias documentadas en el Instituto de Investigaciones Electricas (IIE), la Comision Federal de

  8. Lutein Induces Autophagy via Beclin-1 Upregulation in IEC-6 Rat Intestinal Epithelial Cells.

    Science.gov (United States)

    Chang, Chi-Jen; Lin, Ji-Fan; Hsiao, Chien-Yu; Chang, Hsun-Hao; Li, Hsin-Ju; Chang, Hsun-Hsien; Lee, Gon-Ann; Hung, Chi-Feng

    2017-01-01

    Lutein is a carotenoid with anti-oxidant properties. Autophagy, an evolutionarily conserved catabolic cellular pathway for coping with stress conditions, is responsive to reactive oxygen species (ROS) and degrades damaged organelles. We previously demonstrated that lutein can induce anti-oxidant enzymes to relieve methotrexate-induced ROS stress. We therefore hypothesized that lutein, which activates ROS-scavenging enzymes, can also induce autophagy for cell survival. In this study, we demonstrated that lutein treatment attenuated the reduction in cell viability caused by H 2 O 2 . Lutein dose-dependently induced the processing of microtubule-associated protein light chain 3 (LC3)-II, an autophagy marker protein, and accumulation of LC3-positive puncta in rat intestinal IEC-6 cells. Furthermore, (a) direct observation of autophagosome formation through transmission electron microscopy, (b) upregulation of autophagy-related genes including ATG4A, ATG5, ATG7, ATG12, and beclin-1 (BENC1), and (c) increased BECN1/Bcl-2 ratio confirmed the induction of autophagy by lutein. The results revealed that bafilomycin-A1-induced inhibition of autophagy reduced cell viability and increased apoptosis in lutein-treated cells, indicating a protective role of lutein-induced autophagy. Lutein treatment also activated adenosine monophosphate-activated protein kinase (AMPK), c-Jun N-terminal kinase (JNK), and p-38, but had no effects on the induction of extracellular signal-related kinase or inhibition of mTOR; however, the inhibition of activated AMPK, JNK, or p-38 did not attenuate lutein-induced autophagy. Finally, increased BECN1 expression levels were detected in lutein-treated cells, and BECN1 knockdown abolished autophagy induction. These results suggest that lutein-induced autophagy was mediated by the upregulation of BECN1 in IEC-6 cells. We are the first to demonstrate that lutein induces autophagy. Elevated autophagy in lutein-treated IEC-6 cells may have a protective role

  9. Determination of inherent and additional filtration in order to establish radiation qualities according to IEC 61267

    Energy Technology Data Exchange (ETDEWEB)

    Franciscatto, Priscila Cerutti; Potiens, Maria da Penha Albuquerque, E-mail: pfranciscatto@yahoo.com.b, E-mail: mppalbu@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    In order to establish the radiation qualities recommended do the IEC 61267 to diagnostic radiology calibration, it was determined the inherent and additional filtration of an X rays system at the Calibration Laboratory of IPEN. To determine the inherent filtration it was used the methodology recommended by the norm ISO 4037-1. The HVL found was 0.1 mmAl. After that, using the published data at the ISO 4037-1, it was calculated the inherent filtration correspondent to this HVL, by extrapolation method. The inherent filtration found was 0.138 mmAl. To determine the additional filtration necessary to get each one of the RQR radiation qualities, according to IEC 61267, it is necessary to make an attenuation curve with no filtration. After that a transparent rectangle template representing the first and the second HVL, correspondent to the specific RQR, was made and it was slid through the curve. When the edges of the rectangle fit the curve, it is found the additional filtration to the specific radiation quality. This procedure was applied to each radiation quality from 40 to 150 kV. According to the IEC 61267, after the additional filtration determination, the correspondent HVL must be added and the relation between the values obtained with and without this HVL must be from 0.485 and 0.515. In this work all obtained values were inside this range, nevertheless, a fine adjustment was made in order to get a relation of 0.500. The obtained additional filtration to the RQR qualities was from 2.3 mmAl to 4.2 mmAl. (author)

  10. QA Programme of the TLD laboratory of the University of Costa Rica: IEC 61066 testing

    International Nuclear Information System (INIS)

    Mora, Patricia; Porras Chaverria, Mariela

    2008-01-01

    The Thermoluminescence Personal Dosimetry Laboratory of the University of Costa Rica provides dose measurements for around 90% of occupational radiation workers in the country. The assessment of doses to workers routinely exposed to external sources of radiation constitutes an integral part of any radiation protection programme and helps national authorities to ensure acceptably safe and satisfactory radiological conditions in workplaces. Harshaw Readers Model 4000 and 4500, dosimeter holders Type 8814 with TLD-100 in 0110 cards and loose TLD-100 chips are used to monitor personal dose equivalent, Hp(10) and Hp(0.07). In order to provide a reliable measurement of the operational quantities, a study was undertaken to verify the fulfillment of international requirements in our system (Model 4500 with cards) against the Thermoluminescence dosimetry systems for personal and environmental monitoring CEI IEC 61066 (1991 -2012). The type tests performed were nine in total: batch homogeneity, reproducibility, linearity, detection threshold, effect of climate conditions on reader, effect of light exposure on dosimeters, isotropy, transient voltage and dropping on dosimeters. A Cesium-137 source was used to irradiate the dosimeters and all procedures follow the indications given on the standard. Results showed that all IEC criteria were met by our Laboratory. Acceptable uncertainties were also studied under the ICRP recommendations; the analysis of the Trumpet Curve was done with satisfactory results (for doses above 0.5 mSv; quotient of measure to real dose less than 3%). For purposes of accreditation (ISO/IEC 17025:2005) and performance testing this work is very relevant since the University of Costa Rica wants to establish a solid individual monitoring programme for external radiation exposure that will provide users, registrants, licensees and regulatory bodies with information that can be used for the optimization of protection and dose limitation of Costa Rican workers

  11. Study on Public Flood Risk Cognition and Behavioral Response Based on IEC Strategy

    Science.gov (United States)

    Shen, Xin; Xu, Xiaofeng; Zhou, Guilin; Pan, Shaolin; Mi, Tengfei

    2017-11-01

    In order to disseminate knowledge and information on flood risks in flood-prone areas, raise public awareness of flood risks and reduce possible damage to the public, a questionnaire survey was coducted among 260 residents of nine selected communities in Jiaozhou City to learn the public awareness and behavioral response to flood risks at different early warning levels. IEC key information of flood risk awareness was modified and formulated through group discussions, in-depth individual interviews and on-site observation. The awareness of residents in the project area was enhanced through the public participation, environmental management and flood management training, which plays a very important role in reducing flood losses.

  12. Plan director de seguridad de la información ISO/IEC 27001:2013

    OpenAIRE

    Cortijo Solera, José Antonio

    2015-01-01

    El presente TFM ha consistido en la elaboración de un plan director de seguridad para la empresa de seguros FINALIN S.L., una empresa pyme que carecía de cualquier análisis previo de esta índole. El análisis se realizó tomando como referencia el estándar internacional ISO/IEC 27001:2013. Durante el desarrollo del presente plan, este estándar se establece como objetivo deseable a alcanzar. El present TFM ha consistit en l'elaboració d'un pla director de seguretat per a l'empresa d'asseguran...

  13. NC ISO/IEC1725:00 Accreditation process of CPHR main laboratories

    International Nuclear Information System (INIS)

    Marrero Garcia, Mariela; Molina perez, Daniel; Fernandez Gomez, Maria; Walwyn Salas, Gonzalo

    2003-01-01

    With the objective of offering technically qualified and competitive services one works in our laboratories under the requirements of a System of the Quality from 1993. In 1999 that was already with a draft of the new model ISO/IEC 17025:00 the steps they were given for the change of the Guide 25. At the moment with 3 laboratories accredited by the Cuban organ (ONARC), we are pioneer in these changes because alone a very reduced group of laboratories in the country has achieved it. The present work enunciates the antecedents of the change, the main non conformities during the evaluations for the accreditation and the obtained results

  14. MEMBANGUN HUBUNGAN ANTARA METRIK CHIDAMBER DAN KEMERER DENGAN KARAKTERISTIK EFISIENSI PADA ISO/IEC 9126-2 UNTUK APLIKASI SUMBER TERBUKA

    OpenAIRE

    Achmad Arwan; Siti Rochimah

    2013-01-01

    Chidamber dan Kemerer menemukan metrik untuk mengukur kualitas sebuah perangkat lunak. Karakteristik efisiensi pada ISO/IEC 9126-2 merupakan karakteristik yang mudah diukur dengan angka. Penelitian ini bertujuan untuk mengetahui adanya hubungan antara metrik Chidamber dan Kemerer dengan ISO/IEC 9126-2. Hal ini dilakukan dengan cara melakukan pengukuran metrik Chidamber dan Kemerer dan metrik ISO/IEC 9126-2 karakteristik efisiensi pada kode sumber dari aplikasi sumber terbuka yang berbasis Ja...

  15. Energy efficiency through industrial automation. IEC Technical Report 62837: Presentation held at International Symposium on Industrial Energy Saving Technologies, July 11, 2014, Shenyang, China

    OpenAIRE

    Hörcher, Günter

    2014-01-01

    The first edition of the IEC Technical Report 62837 "Energy Efficiency Through Automation Systems" was published in September 2013. The IEC TR 62837 is not a standard itself but gives guidelines to Technical Committees how to implement energy efficiency aspects into their standardisation work in a standardised way. Based on the structural concepts of manufacturing systems described in IEC 62264 it defines generic models, tools, and methods to be applied for the improvement of energy efficienc...

  16. Surfactant Proteins-A and -D Attenuate LPS-Induced Apoptosis in Primary Intestinal Epithelial Cells (IECs).

    Science.gov (United States)

    Zhang, Linlin; Meng, Qinghe; Yepuri, Natesh; Wang, Guirong; Xi, Xiuming; Cooney, Robert N

    2018-01-01

    SP-A/D KO mice with sepsis demonstrate more severe lung, kidney, and gut injury/apoptosis than WT controls. We hypothesize SP-A and SP-D directly regulate lipopolysaccharide (LPS)-induced P38 mitogen-activated protein kinase (MAPK) activation and gut apoptosis during sepsis. Primary IECs were established from SP-A/D KO or C57BL/6 WT mice, stimulated with LPS and harvested at 24 h. IECs from WT mice were treated with SP-A, SP-D, or vehicle for 20 h, then LPS for 24 h. Apoptosis, cleaved caspase-3 levels and the ratio of BAX/Bcl-2 were assayed. The role of P38 MAPK was examined using the P38 MAPK-agonist U46619 and inhibitor SB203580 in LPS-treated cells. p-P38 MAPK/t-P38 MAPK, TLR4, and CD14 were measured by Western Blot. LPS-induced apoptosis, caspase-3 levels, BAX/Bcl-2, and p-P38/t-P38 MAPK were increased in SP-A/D KO IECs. SP-A and SP-D attenuate LPS-induced increase in apoptosis, cleaved caspase-3, BAX/Bcl-2, and p-P38/t-P38 MAPK in WT IECs. U46619 increased apoptosis, caspase-3, and BAX/Bcl-2 in IECs which was attenuated by SP-A/D. SB203580 attenuates the LPS-induced increase in apoptosis, caspase-3, and BAX/Bcl-2 in WT IECs. Addition of SP-A or SP-D to SB203580 completely ameliorates LPS-induced apoptosis. The LPS-induced increase in TLR4 and CD14 expression is greater in IECs from SP-A/D KO mice and treatment of WT IECs with SP-A or SP-D prevents the LPS-induced increase in TLR4 and CD14. SP-A and SP-D attenuate LPS-induced increases in apoptosis, caspase-3, and BAX/Bcl-2 in IECs. Attenuation of LPS-induced activation of TLR4 and P38 MAPK signaling pathways represents potential mechanisms for the protective effects of SP-A/D on apoptosis.

  17. Wind Plant Models in IEC 61400-27-2 and WECC - latest developments in international standards on wind turbine and wind plant modeling

    DEFF Research Database (Denmark)

    Fortmann, Jens; Miller, Nicholas; Kazachkov, Yuri

    2015-01-01

    This paper describes the latest developments in the standardization of wind plant and wind plant controller models. As a first step IEC TC88 WG 27 and WECC jointly developed generic wind turbine models which have been published by WECC in 2014 and IEC in 2015 as IEC 61400-27-1, which also included...... a draft plant controller model in an informative annex. In a second step, parallel activities have been going on in WECC and IEC TC88 WG 27 to create plant models that can include a number of wind turbines, a plant controller and optional equipment. The WECC models are intended to be finalized in 2015...

  18. 80 years of IEC: Future requirements on teaching and research in the field of energy. Papers; 80 Jahre IEC: Zukuenftige Anforderungen an Lehre und Forschung auf dem Gebiet der Energie. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    Born, M. [comp.

    2000-07-01

    The conference was part of the festivities of the 80{sup th} Anniversary of the Brown Coal Research Institute, that were celebrated at the Institute of Energy Processing and Chemical Engineering (IEC), Freiberg University of Mining and Technology. The Institute of Energy Processing and Chemical Engineering preserves and continues the traditional cooperation with the Brown Coal Industry in the field of the energy conversion processes. The conference proceedings give the reader an impression of the presently meaning of fossil energy sources and explain the competence of the IEC in educating and researching on fuel techniques in future. (orig.) [German] Die Tagung wurde anlaesslich des 80. Jahrestages der Gruendung des Braunkohlenforschungsinstitutes an der TU Bergakademie Freiberg durchgefuehrt. Das Institut fuer Energieverfahrenstechnik und Chemieingenieurwesen fuehrt die traditionsreiche Kooperation mit der Braunkohleindustrie auf dem Gebiet der Energiewandlungsprozesse fort. Die Beitraege charakterisieren die derzeitige Bedeutung der fossilen Energietraeger und erlaeutern die Kompetenz des IEC fuer eine zukunftsorientierte Lehre und Forschung in der Brennstofftechnik. (orig.)

  19. Improving the quality control program for patient dose calibrator according to IEC 60580; Aperfeicoamento de um programa de controle de qualidade do 'patient dose calibrator' de acordo com a norma IEC 60580

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Nathalia Almeida; Potiens, Maria da Penha Albuquerque, E-mail: nathaliac@gmail.com, E-mail: mppalbu@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-11-01

    The objective of this work was to improve the program quality control of this equipment based on the International Standard IEC 60580 - Medical electrical equipment - Dose area product meters . The initial program was established following the recommendations of IEC 61674 quoting dosimeters with ionization chambers and / or semiconductor detectors used in diagnostic X-ray image, however, the IEC 60580 is referred specifically to gauges and KAP (kerma-area product) presents additional tests. Tests included: intrinsic relative error, repeatability, scanning resolution, settling time, restarting, float values, response time and spatial uniformity of response. As a rule, all measurements are within the range characteristic of equipment performance. Thus, the PDC (Patient Dose Calibrator) again shows a device with excellent functionality and reliability in characterization tests carried out to quality control as( for the test in clinical PKA meters.

  20. Perencanaan dan Implementasi Information Security Management System Menggunakan Framework ISO/IEC 20071

    Directory of Open Access Journals (Sweden)

    Anggi Anugraha Putra

    2016-01-01

    Full Text Available Penerapan tata kelola Teknologi Informasi saat ini sudah menjadi kebutuhan dan tuntutan di setiap instansi penyelenggara pelayanan publik mengingat peran TI yang semakin penting bagi upaya peningkatan kualitas layanan sebagai salah satu realisasi dari tata kelola pemerintahan yang baik (Good Corporate Governance. Dalam penyelenggaraan tata kelola TI, faktor keamanan informasi merupakan aspek yang sangat penting diperhatikan mengingat kinerja tata kelola TI akan terganggu jika informasi sebagai salah satu objek utama tata kelola TI mengalami masalah keamanan informasi yang menyangkut kerahasiaan (confidentiality, keutuhan (integrity dan ketersediaan (availability. Information Security Management System (ISMS adalah seperangkat kebijakan berkaitan dengan manajemen keamanan informasi atau terkait dengan risiko TI. Prinsip yang mengatur di balik ISMS adalah bahwa organisasi harus merancang, menerapkan dan memelihara seperangkat kebijakan, proses dan sistem untuk mengelola risiko aset informasi mereka, sehingga memastikan tingkat risiko keamanan informasi yang dapat diterima. Dari perencanaan dan implementasi sistem manajemen keamanan informasi ini, dihasilkan daftar nilai risiko akhir aset- aset kritikal dan dokumen-dokumen tata kelola penunjang ISMS. Metode penelitian yang digunakan adalah studi kasus yang didalam hal ini, merupakan penelitian kualitatif. Adapun proses yang digunakan untuk mengukur tingkat kematangan dari tata kelola keamanan sistem informasi ini berdasarkan kerangka kerja ISO/IEC 27001. Dari kerangka tersebut kemudian dilakukan evaluasi terhadap objek kontrol yang dimiliki ISO/IEC 27001. Hasil yang didapat adalah peningkatan terhadap tata kelola keamanan sistem informasi. Kesimpulan dari penelitian ini adalah dibutuhkannya tata kelola keamanan sistem informasi agar IT dapat diandalkan untuk mencapai tujuan bisnis.

  1. Hybrid Multi-Agent Control in Microgrids: Framework, Models and Implementations Based on IEC 61850

    Directory of Open Access Journals (Sweden)

    Xiaobo Dou

    2014-12-01

    Full Text Available Operation control is a vital and complex issue for microgrids. The objective of this paper is to explore the practical means of applying decentralized control by using a multi agent system in actual microgrids and devices. This paper presents a hierarchical control framework (HCF consisting of local reaction control (LRC level, local decision control (LDC level, horizontal cooperation control (HCC level and vertical cooperation control (VCC level to meet different control requirements of a microgrid. Then, a hybrid multi-agent control model (HAM is proposed to implement HCF, and the properties, functionalities and operating rules of HAM are described. Furthermore, the paper elaborates on the implementation of HAM based on the IEC 61850 Standard, and proposes some new implementation methods, such as extended information models of IEC 61850 with agent communication language and bidirectional interaction mechanism of generic object oriented substation event (GOOSE communication. A hardware design and software system are proposed and the results of simulation and laboratory tests verify the effectiveness of the proposed strategies, models and implementations.

  2. Establishing the Isotope Hydrology Laboratory in accordance with ISO/IEC 17025:2005 standard

    International Nuclear Information System (INIS)

    Nguyen Thi Hong Thinh; Ha Lan Anh; Vo Thi Anh; Dinh Thi Bich Lieu; Vo Thi Tuong Hanh

    2013-01-01

    The ISO/IEC 17025:2005 General requirements for the competence calibration laboratories is basis for the accreditation body of the country in general and VILAS in particular recognizing the competence of laboratories. With the desire to prove that we have sufficient technical , management capacity , and the ability to provide the legally recognized and technically valuable test results, the Isotope Hydrology Laboratory have developed a quality management system in accordance with ISO / IEC 17025:2005, in which the laboratory quality manual has been developed. It describes the laboratory management system , scope of activities related to quality assurance of 13 major ions and tritium content measurement services in water samples. Under quality management system, there are management and technical procedures, analysis procedures, work instructions, technical documentation, file and form system. These documents define the roles, responsibilities, powers, detailed instructions for applying and maintaining effective quality management system. Isotope Hydrology Laboratory received a certificate of accreditation issued by Bureau of Accreditation which recognized the laboratory in accordance with ISO 17025:2005 with VILAS 670 accreditation code. Scope of recognition is analyzed 14 parameters: F - , Cl - , NO 2 - , NO 3 - , Br - , PO 4 3- , SO 4 2- , Li + , Na + , NH 4 + , K + , Mg 2+ , Ca 2+ and 3 H in water by ion chromatography and liquid scintillator counting method. (author)

  3. The Design and Operation of IEC 61850 – Based Transformer Measuring Device

    Directory of Open Access Journals (Sweden)

    Paweł Kopański

    2014-03-01

    Full Text Available The submitted paper presents the results of research on the development of a monitoring system for HV power transformers using the IEC 61850 communication standard. The characteristic feature of this system is its implementation on Linux-based programmable PLC. Data registration functionality, aggregation, archiving and data visualization are merged on one controller. Data registration is performed through built-in digital and analogue input cards, Ethernet and serial ports used for communication with external devices. Data aggregation and archiving is based on the MySQL database system, through data visualization and presentation thanks to an in-built HTML server with an implemented HTML web page that shows the most important parameters in real time. In addition, the implemented IEC 61850 stack enables a direct communication with the SCADA system. The stack has been implemented within the controller in such a way that the need for additional equipment, such as standard machine translation, is reduced. Both the device and all the algorithms developed in the Institute of Electrical Engineering allow collecting and recording the signals in real time, and moreover make a preliminary diagnosis of the transformer.

  4. A novel PRP based deterministic, redundant and resilient IEC 61850 substation communication architecture

    Directory of Open Access Journals (Sweden)

    S.M. Suhail Hussain

    2016-09-01

    Full Text Available A secure, reliable, redundant, resilient, time critical, efficient and interoperable substation communication network (SCN is a prerequisite for a viable Substation Automation System (SAS. Due to emergence of IEC 61850 as a global standard for substation automation, the interoperability issues among components of substation from different vendors are resolved. The communication network must be fault tolerant and any substantial levels of disturbances should not affect the normal operation of the SAS. Due to digitization in SCN, the communication methodology is mainly focused on exchange of encrypted packet information. Failure of the communication mechanism, even for the order of milliseconds, would lead to catastrophic effects within the substation and also impacts the operation of grid, if not cleared timely. The high reliability of such a system is only possible under a redundant communication network which has a zero switchover time. Hence IEC 62439-3 based redundant protocols such as Parallel Redundancy Protocol (PRP recommended to be used in SCNs to achieve redundancy and seamless recovery in case of a failure. PRP based SAS along with detailed analysis of underlying process for implementing PRP protocol and its comparison with existing conventional protocols based SCN reported in literature is presented.

  5. The Load Level of Modern Wind Turbines according to IEC 61400-1

    International Nuclear Information System (INIS)

    Freudenreich, K; Argyriadis, K

    2007-01-01

    The paper describes some effects on the load level of state-of-the art multi megawatt wind turbines introduced by the new edition of the standard IEC 61400-1:2005 W ind Turbines - Part 1: Design requirements . Compared to the previous edition, especially the extreme load determination has been modified by applying stochastic and statistical analyses. Within this paper the effect on the overall load level of wind turbines is demonstrated and occurring problems are discussed. Load simulations have been carried out for four state-of-the-art multi-megawatt wind turbines of different design concepts and from different manufacturers. The blade root bending moments and tip deflection have been determined by applying different extrapolation methods. Advantages and disadvantages of these methods and tail fittings for different load components and wind turbine technologies are discussed and interpreted. Further on, the application of the extreme turbulence model is demonstrated. The dependence of the load level on the turbulence intensity and control system, as well as the interaction with extrapolated loads is discussed and limitations outlined. The obtained load level is compared to the overall load level of the turbines according to the previous edition of the standard, IEC 61400-1:1999

  6. Overview, status and outline of the new IEC 61400-27. Electrical simulation models for wind power generation

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, Poul [Wiley (John) and Sons, Inc., New York, NY (United States). Journal Dept.; Andresen, Bjoern [Siemens Wind Power (Denmark); Fortmann, Jens [RE-Power Systems AG (Germany); Johansen, Knud [Energinet.dk (Denmark); Pourbeik, Pouyan [EPRI (United States)

    2011-07-01

    This paper presents the ongoing work in Working Group (WG) 27 of IEC Technical Committee (TC) 88 developing a standard IEC 61400-27 for 'Electrical simulation models for wind power generation'. The purpose of the standardization work is to define generic simulation models for wind turbines and wind power plants, which are intended for power systems stability analyses. Thus, the models will be applicable for dynamic simulations of power system events such as faults, loss of generation or loads and switching of lines. The paper presents the actual status of the IEC TC88 WG27 work. Some of the challenges encountered during the process of the development of the standard are described, and expected outcome of the standard is also presented. (orig.)

  7. Observations of a Windy Star

    Science.gov (United States)

    Kohler, Susanna

    2017-06-01

    Hubble view of the Homunculus Nebula surrounding Eta Carinae [NASA Hubble Space Telescope/Jon Morse (University of Colorado)]The incredibly luminous massive star Eta Carinae has long posed a challenge for astronomers to model. New observations are now in so were our models correct?Dramatic TargetThe massive evolved star Eta Carinae, located 7,500 light-years away in the constellation Carina, is the most luminous star in the Milky Way. Eta Carinae has a quite a reputation for drama: it has been very unstable in the past, exhibiting repeated eruptions that have created the spectacular Homunculus Nebula surrounding it. Its present-day wind has the highest mass-loss rate of any hot star weve observed.Picture of Stellar WindTop panel: February 2017 observations of Eta Carinae in continuum (left) and H-alpha. Middle panel: the normalized radial profile for H-alpha and continuum emission. Bottom panel: the full width at half maximum for H-alpha and continuum emission of Eta Carinae. The H-alpha is about 2.5 to 3 milliarcseconds wider than the continuum. [Adapted from Wu et al. 2017]In our goal to understand the late evolutionary phases of very massive stars, weve developed radiative-transfer models to explain the behavior of Eta Carinae. One of the most well-known models, developed by John Hillier and collaborators in 2001, describes Eta Carinaes mass loss via stellar winds. With the right observations, this model is testable, since it predicts observable locations for different types of emission. In particular, one prediction of the Hillier et al. model is that the dense, ionized winds surrounding the star should emit in H-alpha at distances between 6 and 60 AU, with a peak around 20 AU.This nicely testable hypothesis is rendered less convenient by the fact that its hard to get resolved images of Eta Carinaes H-alpha emission. Its distance from us and the fact that its shrouded in the complex nebula it created have thus far prevented us from resolving the H-alpha emission from this star. Now, however, a team of scientists from Steward Observatory, University of Arizona have changed this.Confirming the ModelLed by Ya-Lin Wu, the team obtained diffraction-limited images of Eta Carinae using the Magellan adaptive optics system. The observations, made in both H-alpha and continuum, show that the H-alpha emitting region is significantly wider than the continuum emitting region, as predicted by the model. In fact, the measured emission implies that the H-alpha line-forming region may have a characteristic emitting radius of 2530 AU in very good agreement with the Hillier et al. stellar-wind model.This confirmation is strong support of the physical wind parameters estimated for Eta Carinae in the model, like the mass-loss rate of 10^-3 solar masses per year. These parameters are enormously helpful as we attempt to understand the physics of strong stellar-wind mass loss and the late evolutionary phases of very massive stars.CitationYa-Lin Wu et al 2017 ApJL 841 L7. doi:10.3847/2041-8213/aa70ed

  8. Model-driven design using IEC 61499 a synchronous approach for embedded and automation systems

    CERN Document Server

    Yoong, Li Hsien; Bhatti, Zeeshan E; Kuo, Matthew M Y

    2015-01-01

    This book describes a novel approach for the design of embedded systems and industrial automation systems, using a unified model-driven approach that is applicable in both domains.  The authors illustrate their methodology, using the IEC 61499 standard as the main vehicle for specification, verification, static timing analysis and automated code synthesis.  The well-known synchronous approach is used as the main vehicle for defining an unambiguous semantics that ensures determinism and deadlock freedom. The proposed approach also ensures very efficient implementations either on small-scale embedded devices or on industry-scale programmable automation controllers (PACs). It can be used for both centralized and distributed implementations. Significantly, the proposed approach can be used without the need for any run-time support. This approach, for the first time, blurs the gap between embedded systems and automation systems and can be applied in wide-ranging applications in automotive, robotics, and industri...

  9. Security Process Capability Model Based on ISO/IEC 15504 Conformant Enterprise SPICE

    Directory of Open Access Journals (Sweden)

    Mitasiunas Antanas

    2014-07-01

    Full Text Available In the context of modern information systems, security has become one of the most critical quality attributes. The purpose of this paper is to address the problem of quality of information security. An approach to solve this problem is based on the main assumption that security is a process oriented activity. According to this approach, product quality can be achieved by means of process quality - process capability. Introduced in the paper, SPICE conformant information security process capability model is based on process capability modeling elaborated by world-wide software engineering community during the last 25 years, namely ISO/IEC 15504 that defines the capability dimension and the requirements for process definition and domain independent integrated model for enterprise-wide assessment and Enterprise SPICE improvement

  10. IMPLEMENTATION OF SECURITY CONTROLS ACCORDING TO ISO/IEC 27002 IN A SMALL ORGANISATION

    Directory of Open Access Journals (Sweden)

    MATÚŠ HORVÁTH

    2009-12-01

    Full Text Available Information security should be today a key issue in any organization. With the implementation of information security management system (ISMS the organization can identify and reduce risks in this area. This the area of information security management covers a numbers of ISO / IEC 27000 standards, which are based on best practice solutions. However, smaller organizations are often discourages with the implementation of these systems, because of fear of high cost and complexity. Especially due to the fact that the standards does not strictly require implementation of all security controls it is possible to implement these systems in small-size organizations. In this article, we want to point on this fact through describing practical experience with ISMS implementation in small-size organization.

  11. Revealing the ISO/IEC 9126-1 Clique Tree for COTS Software Evaluation

    Science.gov (United States)

    Morris, A. Terry

    2007-01-01

    Previous research has shown that acyclic dependency models, if they exist, can be extracted from software quality standards and that these models can be used to assess software safety and product quality. In the case of commercial off-the-shelf (COTS) software, the extracted dependency model can be used in a probabilistic Bayesian network context for COTS software evaluation. Furthermore, while experts typically employ Bayesian networks to encode domain knowledge, secondary structures (clique trees) from Bayesian network graphs can be used to determine the probabilistic distribution of any software variable (attribute) using any clique that contains that variable. Secondary structures, therefore, provide insight into the fundamental nature of graphical networks. This paper will apply secondary structure calculations to reveal the clique tree of the acyclic dependency model extracted from the ISO/IEC 9126-1 software quality standard. Suggestions will be provided to describe how the clique tree may be exploited to aid efficient transformation of an evaluation model.

  12. Implementation of IEC Generic Model Type 1 Wind Turbine Generators using RTDS

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Wu, Qiuwei; Zhao, Haoran

    are useful tools to evaluate the impact of the wind power on the power system stability. Thus, a strong stimulus exists for the development of a generic dynamic model in order to further investigate the dynamic response of WTG under grid disturbances. This paper presents the implementation of the IEC generic......With the ever increasing penetration of the wind power generation, transmission system operators (TSOs) and distribution system operators (DSOs) are demanding an accurate dynamic wind turbine generator (WTG) models for power system stability studies. However, the confidential requirements from wind...... turbine manufacturers prevent the academia and researchers from working on a real or/and manufacturer specific models. A generic WTG model is of great interest that does not contain the confidential information meanwhile represents the manufacturer specific models. These generic dynamic simulation models...

  13. Implementation of Electrical Simulation Model for IEC Standard Type-3A Generator

    DEFF Research Database (Denmark)

    Subramanian, Chandrasekaran; Casadei, Domenico; Tani, Angelo

    2013-01-01

    turbine with partial scale power converter WEG including a two mass mechanical model. The generic models for fixed and variable speed WEGs models are suitable for fundamental frequency positive sequence response simulations during short events in the power system such as voltage dips. The wind power......This paper describes the implementation of electrical simulation model for IEC 61400-27-1 standard Type-3A generator. A general overview of the different wind electric generators(WEG) types are given and the main focused on Type-3A WEG standard models, namely a model for a variable speed wind...... penetration level continue to increase and the dynamic performance of WEG is more important with power system. The general configuration of the Type-3A model is presented and discussed, model implementation and results are provided in order to illustrate the range of applicability of the generic models....

  14. Introducción al modelo Topic Maps (ISO/IEC13250:2003

    Directory of Open Access Journals (Sweden)

    Maria Jesús Colmenero Ruiz

    2005-07-01

    Full Text Available Se realiza una revisión del estándar ISO/IEC 13250:2003 Topic Maps, resaltando sus posibilidades en el ámbito documental. Tras describir su evolución histórica y la situación actual se desarrollan los conceptos que componen este modelo, los tres elementos básicos (topic, association, y occurrence y dos más (scope y public subject, analizando sus posibilidades para la organización del conocimiento, como estructura de navegación semántica y para la interoperabilidad. Se analizan los elementos más interesantes de la especificación XTM 1.0 y, por último, se detallan algunos de los entornos en los que está siendo aplicado.

  15. Implementation of IEC Generic Model of Type 1 Wind Turbine Generator in DIgSILENT PowerFactory

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei; Margaris, Ioannis

    2013-01-01

    The implementation method for the International Electrotechnical Commission (IEC) generic models of Type 1 wind turbine generator (WTG) in DIgSILENT PowerFactory is presented. The following items are described, i.e. model structure, model blocks and how to implement these blocks in the Power...... both normal and fault conditions. © 2013 State Grid Electric Power Research Institute Press....

  16. Implementation of draft IEC Generic Model of Type 1 Wind Turbine Generator in PowerFactory and Simulink

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei; Sørensen, Poul Ejnar

    2013-01-01

    This paper presents the implementation work of IEC generic model of Type 1 wind turbine generator (WTG) in two commercial simulation tools: DIgSILENT PowerFactory (PF) and Matlab Simulink. The model topology, details of the composite blocks and implementation procedure in PF and Simulink...... correctly represent the performance of Type 1 WTG for power system stability studies....

  17. Evaluation of the hierarchical control of distributed Energy Storage Systems in islanded Microgrids based on Std IEC/ISO 62264

    DEFF Research Database (Denmark)

    Palizban, Omid; Kauhaniemi, Kimmo; Guerrero, Josep M.

    2016-01-01

    In this paper, a decentralized control methodology based on hierarchical control levels is investigated. In recent years, efforts have been made to standardize microgrids (MGs), and the decentralized control method evaluated here is based on the IEC/ISO 62264 standard. Since the main challenge to...

  18. The IEC-publication 336/1981 - new formulation of the standards for X-ray foci

    International Nuclear Information System (INIS)

    Geldner, E.; Schnitger, H.

    1982-01-01

    With the new IEC-standard for foci a clear distinction has been made between application oriented focus classification, expressed by the focus nominal value as a dimensionless number and the detectable real geometric focus measured in the sense of the principle 'Truth in advertising'. Now, even regions of a size [de

  19. Elaboración de un plan de implementación de la ISO/IEC 27001:2013 para la empresa Liancar Ltda

    OpenAIRE

    Barajas Largo, Emilio

    2016-01-01

    Elaboración de un plan de implementación de la norma ISO/IEC 27001:2013 en la empresa Liancar Ltda ubicada en Bogotá, Colombia. Elaboració d'un pla d'implementació de la norma ISO/IEC 27001: 2013 a l'empresa Liancar Ltda situada a Bogotà, Colòmbia. Elaboration of a plan for the implementation of the ISO/IEC 27001: 2013 standard in the company Liancar Ltda located in Bogota, Colombia.

  20. Application of standard IEC 61850 im smart grids and their benefit in the field of electromobility; Anwendung der Norm IEC 61850 in Smart Grids und deren Nutzen im Bereich der Elektromobilitaet

    Energy Technology Data Exchange (ETDEWEB)

    Nauck, Enrico; Oswald, Erik; Spaehn, Michael [Fraunhofer ESK, Muenchen (Germany)

    2012-07-01

    This study indicates the possibility to control the charging stations by a secondary actor, e.g. the grid operator for network applications such as charging of electric vehicles. For this purpose the IEC 61850 Standard is extended for the use in charging stations. Part -90-8 describes a specific information model for an electric charging station. At the moment, different regulatory authorities in Germany are discussing a new concept for controlling the consumption and electrical loads such as electro mobility. The concept will be based on a smart market platform. Only in exceptional cases such as overload, the grid operator have the priority to control the charging process. Additional functions, e.g. reservation of the charging station are not supported by the IEC 61850. (orig.)

  1. Characterization of radiation qualities used for the determination of characteristic in CT application according to IEC 61267:2005;Caracterizacao das qualidades de radiacao usadas na determinacao das caracteristicas em aplicacoes de CT de acordo com a IEC 61267: 2005

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Daniel M.; Silva Junior, Iremar A. da; Potiens, Maria da Penha A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    The purpose of this study was to establish the standard RQT radiation qualities which represent simulations of the unattenuated beam used in Computed Tomography (CT). Thus, to avoiding excessive efforts for establishing a radiation quality by means of the spectral distribution of the photon fluence, the characterization of these standard radiation qualities was expressed in terms of the X-ray tube voltage, first and second half-value layer (HVL). To establishing the standard radiation beam, according to the IEC 61267 and the TRS 457 was measured first of all the correct values of the X ray tube voltages in terms of Practical Peak Voltage. The standard radiation qualities RQT were produced using the same set up mounted for the RQR qualities which had been early established, and for simulating the patient in order to achieve the standard RQT series, suitable thicknesses of layers of copper were used to obtain the values of the first HVL according to IEC 61267. (author)

  2. Inflammatory bowel diseases influence major histocompatibility complex class I (MHC I) and II compartments in intestinal epithelial cells.

    Science.gov (United States)

    Bär, F; Sina, C; Hundorfean, G; Pagel, R; Lehnert, H; Fellermann, K; Büning, J

    2013-05-01

    Antigen presentation by intestinal epithelial cells (IEC) is crucial for intestinal homeostasis. Disturbances of major histocompatibility complex class I (MHC I)- and II-related presentation pathways in IEC appear to be involved in an altered activation of CD4(+) and CD8(+) T cells in inflammatory bowel disease. However, a comprehensive analysis of MHC I- and II-enriched compartments in IEC of the small and large bowel in the healthy state as opposed to inflammatory bowel diseases is lacking. The aim of this study was to characterize the subcellular expression of MHC I and II in the endocytic pathway of IEC throughout all parts of the intestinal tract, and to identify differences between the healthy state and inflammatory bowel diseases. Biopsies were taken by endoscopy from the duodenum, jejunum, ileum and colon in healthy individuals (n = 20). In Crohn's disease (CD), biopsies were obtained from the ileum and colon and within the colon from ulcerative colitis (UC) patients (n = 15). Analysis of IEC was performed by immunoelectron microscopy. MHC I and II were identified in early endosomes and multi-vesicular, multi-lamellar, electrondense and vacuolar late endosomes. Both molecules were enriched in multi-vesicular bodies. No differences were found between the distinct parts of the gut axis. In CD and UC the expression of MHC I and II showed a shift from multi-vesicular bodies towards the basolateral membranes. Within the multi-vesicular bodies, MHC I and II moved from internal vesicles to the limiting membranes upon inflammation in CD and UC. MHC I- and II-enriched compartments in IEC were identical in all parts of the small and large bowel. CD and UC appear to modulate the MHC I- and II-related presentation pathways of exogenous antigens in IEC. © 2012 British Society for Immunology.

  3. Certification of boiler safety equipment with ALSPA P320 system, to IEC 61508 standard; Certification des equipements de securite chaudiere avec le systeme ALSPA P320 selon la norme IEC 61508

    Energy Technology Data Exchange (ETDEWEB)

    Dalzon, J.P. [Alstom Power (France)

    2002-02-01

    Safety and environmental protection are major priorities governing Alstom work on control systems (Alspa P320) for power plant applications, especially when potentially dangerous processes like high-power flame boilers (typically rated at 100 to 600 MW) are involved. Here, automatic protection chains are implemented to guard against the risk of serious incident such as explosion and equipment destruction. In this kind of situation, the IEC 61508 standard provides baseline specifications for certification of safety systems. (authors)

  4. Dosimeter with a photodiode base evaluation by IEC 731 standard and its application in X and gamma radiation field parameters determination and in vivo dosimetry

    International Nuclear Information System (INIS)

    Barbosa, Ricardo Amorim

    1998-03-01

    This work presents a dosimeter with a photodiode base, characterized as field class instrument, for determination of X and gamma radiation field parameters, which are specified in the ISO 4037-1 Standard, and for in vivo dosimetry. Three photodiode models performance, a commercially available (Siemens) and two special others (Hamamatsu), were compared with the ionization chamber's, using the limits established in the IEC 731 Standard as requirement. The long-term stability and the energy dependence tests have shown results higher than the limits but, in special situations, as X-ray beams monitoring, these deficiencies have no influence on the dosimeter performance. The photodiode Siemens has shown uncertainty of 7% for determination of the radiation field diameter, against 4% from the ionization chamber, 16% from the photographic emulsion and 18% from the TDL. At the rotation test, in a water phantom, none of the models has shown satisfactory results. However, using two photodiodes, it was obtained a dosimeter that overcomes these deficiencies, and it could be used for in vivo dosimetry. The relation between the output signal, from the proposed dosimeter, and the phantom depth, has shown agreement of 0,7% with the depth dose distribution curve. So, the dosimeter has shown its capability to evaluate the absorbed dose correctly. (author)

  5. "Racializing" Class

    Science.gov (United States)

    Hatt-Echeverria, Beth; Urrieta, Luis, Jr.

    2003-01-01

    In an effort to explore how racial and class oppressions intersect, the authors use their autobiographical narratives to depict cultural and experiential continuity and discontinuity in growing up white working class versus Chicano working class. They specifically focus on "racializing class" due to the ways class is often used as a copout by…

  6. Kerangka Investigasi Forensik Pada Peladen Pertukaran Berkas Samba Berdasarkan SNI ISO/IEC 27037:2014

    Directory of Open Access Journals (Sweden)

    Dedy Haryadi

    2017-07-01

    Full Text Available Network File System (NFS dan Common Internet File System (CIFS merupakan protokol yang biasa dipakai dalam melakukan pertukaran berkas di dalam sebuah jaringan komputer yang terhubung dengan Network Attached Storage. Mudahnya dalam bertukar berkas dalam sebuah jaringan tidak menutup kemungkinan adanya pertukaran berkas yang bersifat ilegal ataupun berkas yang mengandung tindak kejahatan. Oleh karena itu, diperlukan sebuah model pendekatan investigasi forensik dalam proses pertukaran berkas di sebuah jaringan komputer. Proses akuisisi dalam penelitian ini dilakukan dengan 2 model, yaitu: akuisisi secara langsung pada mesin peladen file-sharing dan akuisisi secara langsung melalui jaringan. Akuisisi secata langsung pada mesin peladen berfokus pada proses akuisisi log dari mesin peladen yang dihasilkan dari layanan samba dan direktori pertukaran berkas. Akusisi secara langsung melalui jaringan berfokus pada direktori pertukaran berkas yang diakses oleh pengguna. Model akuisisi ini berdasarkan SNI ISO/IEC 27037:2014 tentang Pedoman Identifikasi, Pengumpulan, Akuisisi dan Preservasi Bukti Digital yang fokus pada barang bukti elektronik kritis dengan kondisi tidak diperkenankan mati atau shutdown.

  7. Excerpt from: Testing of radiotherapy dosimeters in accordance with specifications given by IEC publication 731 (1982)

    International Nuclear Information System (INIS)

    Jaervinen, Hannu; Rantanen, Erkii; Jokela, Kari

    1986-01-01

    In their position as centres for expertise in radiation dosimetry and its applications, the Secondary Standard Dosimetry Laboratories (SSDLs) are expected to advise the radiation users, the radiotherapy centres in particular, in selection and use of the most suitable dosimetric equipment. Various dosimeters are commercially available, but objective information on their fundamental technical characteristics is lacking. Such information would be valuable and necessary for the SSDLs to be able to judge the accuracy and reliability of the many choices which exist for a given application. The results of systematic evaluations of dosimeters in a recognized SSDL (or SSDLs) could be helpful supplementary information to the other SSDLs and to the radiation users. In 1983 The Finnish Centre for Radiation and Nuclear Safety (STUK; old name: Institute of Radiation Protection) and the International Atomic Energy Agency (IAEA) made a research contract, the purpose of which was to test selected dosimeters for use in radiotherapy in accordance with the specifications by the International Electrotechnical Commission (IEC)

  8. Digital substation based on IEC 61850 : its features and benefits for power system protection

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J.; Dahlgren, M. [ABB AB Corporate Research, Vasteras (Sweden)

    2008-07-01

    This paper described features of modern digital substations with particular reference to protection and control systems that are vital to power systems security and safety. Protection relays in substations have evolved from electro-mechanical relays to static relays in the 1970s, to microprocessor based relays in the 1980s, to present-day multifunctional numerical relays with strong communication facilities such as internet connections. In order to maximize the use of microprocessor based numerical relays, many different communication protocols have been introduced into substation automation systems to form station level monitoring and control functions. The breakthrough in modern substation protection and control systems was the introduction of the advanced standard known as IEC61850. With the new standard, protection relays can communicate with each other without using protocol converters. The modern substations will not only permit a common communication link within a substation secondary system, but create the possibility for even higher level integration of protection and control functions. Non-conventional sensors for current and voltage inputs has created a need to optimize the structure of modern substations due to the simplified and standard digital outputs from those new sensors. This paper described the development stages of modern technology in substation secondary systems and then described the features for a modern digital substation in considering practical evolution of substations in terms of data acquisition and security. The main benefit of such a power system is better use of real time data for optimized control of a safe power system. 7 refs., 8 figs.

  9. Pembuatan Tata Kelola Keamanan Informasi Kontrol Akses Berbasis ISO/IEC 27001:2005 Pada Kantor Pelayanan Perbendaharaan Surabaya I

    Directory of Open Access Journals (Sweden)

    Margo Utomo

    2012-09-01

    Full Text Available Perkembangan teknologi informasi yang pesat saat ini turut berimbas kepada penggunaan teknologi informasi di lingkungan pemerintahan. KPPN Surabaya I sebagai instansi vertikal dari Direktorat Jenderal Perbendaharaan juga menerapkan teknologi informasi dalam untuk mendukung kegiatan pelayanan terhadap satuan kerja yang berada di lingkup bayarnya. Sayangnya masalah keamanan informasi yang merupakan bagian penting dari teknologi informasi sering kali kurang mendapatkan perhatian. Tidak dapat dipungkiri bahwa munculnya ancaman ataupun kelemahan dalam teknologi informasi dapat menggangu jalannya kegiatan pelayanan yang menggunakan teknologi informasi. Oleh karena itu diperlukan pengelolaan teknologi informasi berbasis risiko yang dituangkan dalam tata kelola untuk mengelola ancaman ataupun kelemahan yang muncul. ISO/IEC 27001:2005 merupakan framework sistem manajemen keamanan informasi yang dapat dijadikan dasar dalam pengelolaan keamanan informasi. Tata kelola keamanan informasi yang dibuat ini menitikberatkan pada kontrol akses yang merupakan salah satu kotrol keamanan dari ISO/IEC 27001:2005

  10. Tailoring ISO/IEC 27001 for SMEs: A Guide to Implement an Information Security Management System in Small Settings

    Science.gov (United States)

    Valdevit, Thierry; Mayer, Nicolas; Barafort, Béatrix

    While Information Security Management Systems (ISMS) are being adopted by the biggest IT companies, it remains quite difficult for smaller entities to implement and maintain all the requirements of ISO/IEC 27001. In order to increase information security in Luxembourg, the Public Research Centre Henri Tudor has been charged by the Luxembourg Ministry of Economy and Foreign Trade to find solutions to facilitate ISMS deployment for SMEs. After an initial experiment aiming at assisting a SME in getting the first national ISO/IEC 27001 certification for a private company, an implementation guide for deploying an ISMS, validated by local experts and experimented in SMEs, has been released and is presented in this paper.

  11. Comparisons process-to-bay level peer-to-peer network delay in IEC 61850 substation communication systems

    Directory of Open Access Journals (Sweden)

    Nasser Hasan Ali

    2014-12-01

    Full Text Available This paper presents the application of IEC 61850 protocol in electrical power engineering industry for data communication systems between substations. This IEC 61850 protocol presents new challenges for real-time communication performance between Intelligent Electronic Devices (IEDs within substation because of the Generic Object Oriented Substation Event (GOOSE messages. The analyses of substation Ethernet and WLAN (wireless LAN communication delay, its impact factors, various methods and different network topologies which can improve the real-time performance are discussed. For basic analysis of data flow within a substation, the Optimized Network Engineering Tool (OPNET software is used. The process-to-bay level network simulation model is performed by using the OPNET software. The Ethernet delay and WLAN peer-to-peer performance of the process-to-bay level network simulation results are analyzed which is based on AP (access point, switched, shared Ethernet network or peer-to-peer network.

  12. Safety critical systems handbook a straightforward guide to functional safety : IEC 61508 (2010 edition) and related standards

    CERN Document Server

    Smith, David J

    2010-01-01

    Electrical, electronic and programmable electronic systems increasingly carry out safety functions to guard workers and the public against injury or death and the environment against pollution. The international functional safety standard IEC 61508 was revised in 2010, and this is the first comprehensive guide available to the revised standard. As functional safety is applicable to many industries, this book will have a wide readership beyond the chemical and process sector, including oil and gas, power generation, nuclear, aircraft, and automotive industries, plus project, instrumentation, design, and control engineers. * The only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards* Helps readers understand the process required to apply safety critical systems standards* Real-world approach helps users to interpret the standard, with case studies and best practice design examples...

  13. Cytoprotective effects of essential oil of Pinus halepensis L. against aspirin-induced toxicity in IEC-6 cells.

    Science.gov (United States)

    Bouzenna, Hafsia; Hfaiedh, Najla; Bouaziz, Mouhamed; Giroux-Metges, Marie-Agnès; Elfeki, Abdelfattah; Talarmin, Hélène

    2017-12-01

    Essential oils from Pinus species have been reported to have various therapeutic properties. This study was undertaken to identify the chemical composition and cytoprotective effects of the essential oil of Pinus halepensis L. against aspirin-induced damage in cells in vitro. The cytoprotection of the oil against toxicity of aspirin on the small intestine epithelial cells IEC-6 was tested. The obtained results have shown that 35 different compounds were identified. Aspirin induced a decrease in cell viability, and exhibited significant damage to their morphology and an increase in superoxide dismutase (SOD) and catalase (CAT) activities. However, the co-treatment of aspirin with the essential oil of Pinus induced a significant increase in cell viability and a decrease in SOD and CAT activities. Overall, these finding suggest that the essential oil of Pinus halepensis L. has potent cytoprotective effect against aspirin-induced toxicity in IEC-6 cells.

  14. Sophisticated Calculation of the 1oo4-architecture for Safety-related Systems Conforming to IEC61508

    International Nuclear Information System (INIS)

    Hayek, A; Al Bokhaiti, M; Schwarz, M H; Boercsoek, J

    2012-01-01

    With the publication and enforcement of the standard IEC 61508 of safety related systems, recent system architectures have been presented and evaluated. Among a number of techniques and measures to the evaluation of safety integrity level (SIL) for safety-related systems, several measures such as reliability block diagrams and Markov models are used to analyze the probability of failure on demand (PFD) and mean time to failure (MTTF) which conform to IEC 61508. The current paper deals with the quantitative analysis of the novel 1oo4-architecture (one out of four) presented in recent work. Therefore sophisticated calculations for the required parameters are introduced. The provided 1oo4-architecture represents an advanced safety architecture based on on-chip redundancy, which is 3-failure safe. This means that at least one of the four channels have to work correctly in order to trigger the safety function.

  15. The suitability of the IEC 61400-2 wind model for small wind turbines operating in the built environment★

    Directory of Open Access Journals (Sweden)

    Evans Samuel P.

    2017-01-01

    Full Text Available This paper investigates the applicability of the assumed wind fields in International Electrotechnical Commission (IEC standard 61400 Part 2, the design standard for small wind turbines, for a turbine operating in the built environment, and the effects these wind fields have on the predicted performance of a 5 kW Aerogenesis turbine using detailed aeroelastic models developed in Fatigue Aerodynamics Structures and Turbulence (FAST. Detailed wind measurements were acquired at two built environment sites: from the rooftop of a Bunnings Ltd. warehouse at Port Kennedy (PK (Perth, Australia and from the small wind turbine site at the University of Newcastle at Callaghan (Newcastle, Australia. For both sites, IEC 61400-2 underestimates the turbulence intensity for the majority of the measured wind speeds. A detailed aeroelastic model was built in FAST using the assumed wind field from IEC 61400-2 and the measured wind fields from PK and Callaghan as an input to predict key turbine performance parameters. The results of this analysis show a modest increase in the predicted mean power for the higher turbulence regimes of PK and Callaghan as well as higher variation in output power. Predicted mean rotor thrust and blade flapwise loading showed a minor increase due to higher turbulence, with mean predicted torque almost identical but with increased variations due to higher turbulence. Damage equivalent loading for the blade flapwise moment was predicted to be 58% and 11% higher for a turbine operating at Callaghan and PK respectively, when compared with IEC 61400-2 wind field. Time series plots for blade flapwise moments and power spectral density plots in the frequency domain show consistently higher blade flapwise bending moments for the Callaghan site with both the sites showing a once-per-revolution response.

  16. Otestovaní komunikace po IEC61850 s využitím GOOSE mezi ABB a Siemens ochranou

    OpenAIRE

    Vavreczky, Gábor

    2012-01-01

    Hlavním úkolem této diplomové práce je seznámit se s možnostmi spolupráce IED od společností ABB a Siemens podle IEC61850. Cílem práce je vytvoření a otestování pracovního postupu, po kterém ochrany od ABB a Siemens budou mezi sebou komunikovat prostřednictvím GOOSE zpráv. Tato práce se k tomu poskytuje popis standardu IEC61850, jako teoretický základ. Podrobně se zabývá konfigurací ochran Siprotec 7SA610 podle IEC61850. Dále jsou popsány konfigurační nástroje PCM600 a IET600, které slouží pr...

  17. Protective effects of essential oil of Citrus limon against aspirin-induced toxicity in IEC-6 cells.

    Science.gov (United States)

    Bouzenna, Hafsia; Hfaiedh, Najla; Giroux-Metges, Marie-Agnès; Elfeki, Abdelfattah; Talarmin, Hélène

    2017-05-01

    Aspirin, one of the widely used nonsteroidal anti-inflammatory drugs, is the most highly consumed pharmaceutical product in the world. However, it has several side effects in cells. This study was designed to investigate the antioxidative activity and cytoprotective effects of essential oil of Citrus limon (EOC) extracted from leaves against aspirin-induced damages in the rat small intestine epithelial cells (IEC-6). Biochemical indicators were used to assess cytotoxicity and oxidative damages caused by aspirin treatment on IEC-6. Our results showed that the chemical characterization of EOC identified 25 compounds representing 98.19% of the total oil. The major compounds from this oil were z-citral (53.21%), neryl acetate (13.06%), geranyl acetate (10.33%), and limonene (4.23%). Aspirin induced a decrease in cell viability as well as an increase in superoxide dismutase (SOD) and catalase (CAT) activities. Contrariwise, the co-exposure of cells to aspirin and EOC alleviated every above syndrome by an increase in cell survival and decrease in SOD and CAT activities. In conclusion, the essential oil of C. limon has a potent cytoprotective effect against aspirin-induced toxicity in IEC-6 cells.

  18. Dependent Classes

    DEFF Research Database (Denmark)

    Gasiunas, Vaidas; Mezini, Mira; Ostermann, Klaus

    2007-01-01

    of dependent classes and a machine-checked type soundness proof in Isabelle/HOL [29], the first of this kind for a language with virtual classes and path-dependent types. [29] T.Nipkow, L.C. Poulson, and M. Wenzel. Isabelle/HOL -- A Proof Assistant for Higher-Order Logic, volume 2283 of LNCS, Springer, 2002......Virtual classes allow nested classes to be refined in subclasses. In this way nested classes can be seen as dependent abstractions of the objects of the enclosing classes. Expressing dependency via nesting, however, has two limitations: Abstractions that depend on more than one object cannot...... be modeled and a class must know all classes that depend on its objects. This paper presents dependent classes, a generalization of virtual classes that expresses similar semantics by parameterization rather than by nesting. This increases expressivity of class variations as well as the flexibility...

  19. Coding Class

    DEFF Research Database (Denmark)

    Ejsing-Duun, Stine; Hansbøl, Mikala

    Sammenfatning af de mest væsentlige pointer fra hovedrapporten: Dokumentation og evaluering af Coding Class......Sammenfatning af de mest væsentlige pointer fra hovedrapporten: Dokumentation og evaluering af Coding Class...

  20. Characterization of a PET-NEMA/IEC body phantom for quality control tests of PET/CT equipment

    International Nuclear Information System (INIS)

    Oliveira, Cassio M.; Vieira, Igor F.; Lima, Fernando R.A.; Sa, Lidia V. de

    2011-01-01

    The Brazilian Sanitary Agency from Ministry of Health requires that all PET/CT equipment must undergo minimal quality control tests using manufacturer simulators. The PET-NEMA/IEC body phantom is recommended by the IEC and NEMA to perform acceptance testing and quality control in PET/CT equipment according to specific protocols. It is essential that all simulator components (spheres and body) are properly characterized in relation to their size and internal structure volumes, since they are used to calculate the overall activity concentration and the total weight. The objective of this work was characterize a PET-NEMA/IEC body phantom for the true reconstruction in computational modeling and correct analysis of experimental results. The simulator is basically composed of three structures: the body (simulating a portion of the chest), an inner cylinder (simulating the lung tissue) and a top cover in which are coupled spheres of different sizes simulating 'hot' (tumors) and cold lesions. The spheres were evaluated in terms of volume. The same evaluations were performed with the body of the simulator and the inner cylinder, beyond of analysis of their weights (filled with water) and wall thickness. The data showed that the total weight of the simulator with all its internal structures is 12.5 kg and the volume of the 'hot' and 'cold' spheres are approximately equal to those presented by the manufacturer. The inner cylinder volume showed a significant difference between the measured and the presented in the manual. The results were used for reconstruction of the simulator in computational modeling using the code GATE. (author)

  1. Chemical chaperones reduce ionizing radiation-induced endoplasmic reticulum stress and cell death in IEC-6 cells

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun Sang; Lee, Hae-June; Lee, Yoon-Jin [Division of Radiation Effects, Korea Institute of Radiological and Medical Sciences, Seoul 139-706 (Korea, Republic of); Jeong, Jae-Hoon [Division of Radiotherapy, Korea Institute of Radiological and Medical Sciences, Seoul 139-706 (Korea, Republic of); Kang, Seongman [Division of Life Sciences, Korea University, Seoul 136-701 (Korea, Republic of); Lim, Young-Bin, E-mail: yblim@kirams.re.kr [Division of Radiation Effects, Korea Institute of Radiological and Medical Sciences, Seoul 139-706 (Korea, Republic of)

    2014-07-25

    Highlights: • UPR activation precedes caspase activation in irradiated IEC-6 cells. • Chemical ER stress inducers radiosensitize IEC-6 cells. • siRNAs that targeted ER stress responses ameliorate IR-induced cell death. • Chemical chaperons prevent cell death in irradiated IEC-6 cells. - Abstract: Radiotherapy, which is one of the most effective approaches to the treatment of various cancers, plays an important role in malignant cell eradication in the pelvic area and abdomen. However, it also generates some degree of intestinal injury. Apoptosis in the intestinal epithelium is the primary pathological factor that initiates radiation-induced intestinal injury, but the mechanism by which ionizing radiation (IR) induces apoptosis in the intestinal epithelium is not clearly understood. Recently, IR has been shown to induce endoplasmic reticulum (ER) stress, thereby activating the unfolded protein response (UPR) signaling pathway in intestinal epithelial cells. However, the consequences of the IR-induced activation of the UPR signaling pathway on radiosensitivity in intestinal epithelial cells remain to be determined. In this study, we investigated the role of ER stress responses in IR-induced intestinal epithelial cell death. We show that chemical ER stress inducers, such as tunicamycin or thapsigargin, enhanced IR-induced caspase 3 activation and DNA fragmentation in intestinal epithelial cells. Knockdown of Xbp1 or Atf6 with small interfering RNA inhibited IR-induced caspase 3 activation. Treatment with chemical chaperones prevented ER stress and subsequent apoptosis in IR-exposed intestinal epithelial cells. Our results suggest a pro-apoptotic role of ER stress in IR-exposed intestinal epithelial cells. Furthermore, inhibiting ER stress may be an effective strategy to prevent IR-induced intestinal injury.

  2. Método para la evaluación de calidad de software basado en ISO/IEC 25000

    OpenAIRE

    Baldeón Villanes, Edú James

    2015-01-01

    La gestión de la calidad del producto es un factor crítico de éxito en los proyectos de desarrollo de software. En este sentido, el presente trabajo de investigación propone un método basado en ISO/IEC 25000 (2005) para evaluar la calidad de los entregables de un proyecto. Este método proporciona los lineamientos necesarios para contribuir al incremento de la calidad del producto final y asegurar el cumplimiento de los requisitos del usuario. En esta investigación se revisa la literatura r...

  3. Software Realization on the MSC nanoRISC Hardware Platform, for Communication according to the IEC61850 Standard

    Directory of Open Access Journals (Sweden)

    A. V. Kabović

    2015-06-01

    Full Text Available This paper describes software realization and its implementation for the communication, according to the IEC61850 standard, between the module for monitoring teleprotection devices and the control/monitoring server in a power substation. Teleprotection devices have an important role in the transmission of messages for power line section tripping. The software is implemented on the “MSC nanoRISC-S3C2416 MB2” hardware platform type, which belongs to the COM (computer on module systems.

  4. Assessment of Information Security Management System based on ISO/IEC 27001:2013 On Subdirectorate of Data Center and Data Recovery Center in Ministry of Internal Affairs

    Directory of Open Access Journals (Sweden)

    Kurnianto Ari

    2018-01-01

    Full Text Available Information security is a problem effected business process of an organization, so it needs special concern. Information security assessment which is good and has international standard is done using Information Security Management System (ISMS ISO/IEC 27001:2013. In this research, the high level assessment has been done using ISO/IEC 27001:2013 to observe the strength of information secuity in Ministry of Internal Affairs. The research explains about the assessment of information security management which is built using PHP. The input data use primary and secondary data which passed observation. The process gets maturity using the assessment of ISO/IEC 27001:2013. GAP Analysis observes the condition now a days and then to get recommendation and road map. The result of this research gets all of the information security process which has not been already good enough in Ministry of Internal Affairs, gives recommendation and road map to improve part of all information system being running. It indicates that ISO/IEC 27001:2013 is good used to rate maturity of information security management. As the next analyzation, this research use Clause and Annex in ISO/IEC 27001:2013 which is suitable with condition of Data Center and Data Recovery Center, so it gets optimum result and solving problem of the weakness information security.

  5. Assessment of Information Security Management System based on ISO/IEC 27001:2013 On Subdirectorate of Data Center and Data Recovery Center in Ministry of Internal Affairs

    Science.gov (United States)

    Kurnianto, Ari; Isnanto, Rizal; Widodo, Aris Puji

    2018-02-01

    Information security is a problem effected business process of an organization, so it needs special concern. Information security assessment which is good and has international standard is done using Information Security Management System (ISMS) ISO/IEC 27001:2013. In this research, the high level assessment has been done using ISO/IEC 27001:2013 to observe the strength of information secuity in Ministry of Internal Affairs. The research explains about the assessment of information security management which is built using PHP. The input data use primary and secondary data which passed observation. The process gets maturity using the assessment of ISO/IEC 27001:2013. GAP Analysis observes the condition now a days and then to get recommendation and road map. The result of this research gets all of the information security process which has not been already good enough in Ministry of Internal Affairs, gives recommendation and road map to improve part of all information system being running. It indicates that ISO/IEC 27001:2013 is good used to rate maturity of information security management. As the next analyzation, this research use Clause and Annex in ISO/IEC 27001:2013 which is suitable with condition of Data Center and Data Recovery Center, so it gets optimum result and solving problem of the weakness information security.

  6. On the Implementation of the IEC 61850 Standard: Will Different Manufacturer Devices Behave Similarly under Identical Conditions?

    Directory of Open Access Journals (Sweden)

    Mohamad El Hariri

    2016-12-01

    Full Text Available Standardization in smart grid communications is necessary to facilitate complex operations of modern power system functions. However, the strong coupling between the cyber and physical domains of the contemporary grid exposes the system to vulnerabilities and thus places more burden on standards’ developers. As such, standards need to be continuously assessed for reliability and are expected to be implemented properly on field devices. However, the actual implementation of common standards varies between vendors, which may lead to different behaviors of the devices even if present under similar conditions. The work in this paper tested the implementation of the International Electro-technical Commission’s Generic Object Oriented Substation Event GOOSE (IEC 61850 GOOSE messaging protocol on commercial Intelligent Electronic Devices (IEDs and the open source libiec61850 library—also used in commercial devices—which showed different behaviors in identical situations. Based on the test results and analysis of some features of the IEC 61850 GOOSE protocol itself, this paper proposes guidelines and recommendations for proper implementation of the standard functionalities.

  7. Combining ITIL, COBIT and ISO/IEC 27002 for structuring comprehensive information technology for management in organizations

    Directory of Open Access Journals (Sweden)

    Maico Gehrmann

    2012-09-01

    Full Text Available Several methodologies, tools and standards have been designed to help IT management within organizations. Companies seek, with the use of these mechanisms, the placement of IT management and organizational strategies, mainly to ensure that IT helps with the objectives of the business and the results of the organization. Despite the vast amount of options for tools, methodologies and standards available, when they are used independently, these are not sufficiently wide-ranging to meet all the needs of IT management. This document analyzes ITIL, COBIT and ISO/IEC 27002 methodologies through literature review, highlighting their similarities and differences through the comparison between them. From this analysis, an overall structure is proposed which uses a combination of ITIL, COBIT and ISO/IEC 27002 that can be used by any organization as a more comprehensive solution for the handling and servicing of IT management. As any process, there are positive and negative points. Some negative points of a methodology may be strengthened by the positive ones of other methodologies. This creates more efficient processes.

  8. COMBINING ITIL, COBIT AND ISO/IEC 27002 FOR STRUCTURING COMPREHENSIVE INFORMATION TECHNOLOGY FOR MANAGEMENT IN ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Maico Gehrmann

    2012-09-01

    Full Text Available Several methodologies, tools and standards have been designed to help IT management within organizations. Companies seek, with the use of these mechanisms, the placement of IT management and organizational strategies, mainly to ensure that IT helps with the objectives of the business and the results of the organization. Despite the vast amount of options for tools, methodologies and standards available, when they are used independently, these are not sufficiently wide-ranging to meet all the needs of IT management. This document analyzes ITIL, COBIT and ISO/IEC 27002 methodologies through literature review, highlighting their similarities and differences through the comparison between them. From this analysis, an overall structure is proposed which uses a combination of ITIL, COBIT and ISO/IEC 27002 that can be used by any organization as a more comprehensive solution for the handling and servicing of IT management. As any process, there are positive and negative points. Some negative points of a methodology may be strengthened by the positive ones of other methodologies. This creates more efficient processes.

  9. Functional Suitability Measurement using Goal-Oriented Approach based on ISO/IEC 25010 for Academics Information System

    Directory of Open Access Journals (Sweden)

    Ajeng Savitri Puspaningrum

    2017-10-01

    Full Text Available Rapid of information technology development grow a new competitive environment. Including higher education, they need to improve their service quality in order to provide education service in more competitive. One of the ways of using information technology in higher education is the used of Academic Information System (AIS. AIS was developed to achieve the goals of the learning process which is one of vision and mission organization success factor. The measurement is needed to evaluate the quality of AIS. Functionality is one of the quality factors which is measured by observing the correlation between function and functional suitability. In this study, the quality of AIS functional suitability is measured using goal-oriented approach base on ISO/IEC 25010 in the perspective of a lecturer. The strategic plan of an institution is used as a reference to measure if the system used to have meet institution goals when using this approach. The result shows that the measurement using goal-oriented approach become more objective and suitable to the need of used AIS quality improvement for the institution than the measurement with ISO/IEC 25010 only.

  10. Adaptación del proceso de desarrollo software para cumplimiento de la adecuación funcional según ISO/IEC 25000.

    OpenAIRE

    Martínez López, José Antonio

    2017-01-01

    Hoy en día la calidad es una propiedad fundamental en cualquier ámbito comercial y tecnológico. Si ya de por si la calidad es un concepto difícil de cuantificar, la calidad software es aún más difícil al ser un producto intangible y relativamente nuevo. Hasta hace poco esta calidad se medía exclusivamente a través de la calidad de los procesos del ciclo de vida (ISO/IEC 15504 e ISO/IEC 12207), pero a partir de 2005 surge el estándar ISO/IEC 25000 que permite la medición de la c...

  11. Increased IGF-IEc expression and mechano-growth factor production in intestinal muscle of fibrostenotic Crohn's disease and smooth muscle hypertrophy.

    Science.gov (United States)

    Li, Chao; Vu, Kent; Hazelgrove, Krystina; Kuemmerle, John F

    2015-12-01

    The igf1 gene is alternatively spliced as IGF-IEa and IGF-IEc variants in humans. In fibrostenotic Crohn's disease, the fibrogenic cytokine TGF-β1 induces IGF-IEa expression and IGF-I production in intestinal smooth muscle and results in muscle hyperplasia and collagen I production that contribute to stricture formation. Mechano-growth factor (MGF) derived from IGF-IEc induces skeletal and cardiac muscle hypertrophy following stress. We hypothesized that increased IGF-IEc expression and MGF production mediated smooth muscle hypertrophy also characteristic of fibrostenotic Crohn's disease. IGF-IEc transcripts and MGF protein were increased in muscle cells isolated from fibrostenotic intestine under regulation by endogenous TGF-β1. Erk5 and MEF2C were phosphorylated in vivo in fibrostenotic muscle; both were phosphorylated and colocalized to nucleus in response to synthetic MGF in vitro. Smooth muscle-specific protein expression of α-smooth muscle actin, γ-smooth muscle actin, and smoothelin was increased in affected intestine. Erk5 inhibition or MEF2C siRNA blocked smooth muscle-specific gene expression and hypertrophy induced by synthetic MGF. Conditioned media of cultured fibrostenotic muscle induced muscle hypertrophy that was inhibited by immunoneutralization of endogenous MGF or pro-IGF-IEc. The results indicate that TGF-β1-dependent IGF-IEc expression and MGF production in patients with fibrostenotic Crohn's disease regulates smooth muscle cell hypertrophy a critical factor that contributes to intestinal stricture formation. Copyright © 2015 the American Physiological Society.

  12. Certificación de una empresa de informática y telecomunicaciones en ISO/IEC 27001:2013

    OpenAIRE

    Rodríguez Pubill, Alejandro

    2015-01-01

    En este trabajo se plantea la creación, mantenimiento y mejora de un sistema de gestión de seguridad de la información de una empresa privada basándome en la norma ISO/IEC 27001:2013 y su anexo a la ISO 27002. En aquest treball es planteja la creació, manteniment i millora d'un sistema de gestió de seguretat de la informació d'una empresa privada basant-me en la norma ISO/IEC 27001: 2013 i el seu annex a la ISO 27002. Master thesis for the ICT Security management program.

  13. Aplicación del estándar ISO/IEC 9126-3 en el modelo de datos conceptual entidad-relación

    OpenAIRE

    Miguel Fernando González Pinzón; Juan Sebastián González Sanabria

    2013-01-01

    Presenta una reflexión sobre las consideraciones y recomendaciones que se deben tener en cuenta para evaluar los criterios de calidad del ModeloConceptual, dentro del ciclo de vida de las bases de datos, presentando una revisión de la temática, en la que se tienen en cuenta diversos factores dados por autores destacados en el área, y por estándares como la ISO/IEC 25012, la ISO/IEC 9126-3 y la ISO/IEC 25024.

  14. The ISO/IEC 9126-1 as a Supporting Means for the System Development Process of a Patient Information Web Service.

    Science.gov (United States)

    Hörbst, Alexander; Fink, Kerstin; Goebel, Georg

    2005-01-01

    The development of patient information systems faces the mayor problems of increasing and more complex content as well as the introduction of new techniques of system implementation. An integrated development demands for a method to deal with both aspects. The ISO/IEC 9126-1 offers a framework where both views can be integrated to a general view of the system and can be used as a basis for further development. This article wants to introduce the ISO/IEC 9126-1 as a supporting means for the development of patient information systems considering the example of a web service for a patient information system.

  15. Steady State Modelling of Three-core Wire Armoured Submarine Cables: Power losses and Ampacity Estimation based on FEM and IEC

    DEFF Research Database (Denmark)

    Baù, Matteo; Viafora, Nicola; Hansen, Chris Skovgaard

    2016-01-01

    This paper introduces Finite Element Method mod-elling techniques applied to wire armoured submarine three-core cables, whose nominal voltages range from 36 to 245 kV. The analysis is focused on the implementation of the net voltage cancellation principle in a 2D environment. The model is utilised...... confirm that the wire armour stranding is not accounted for, but also suggest that the ampacity underrating might be due to other inaccuracies in the IEC modelling indications. Overall, the difference in terms of current rating between the FEM and the IEC approach is found to be voltage dependent and more...

  16. Steady State Modelling of Three-core Wire Armoured Submarine Cables: Power losses and Ampacity Estimation based on FEM and IEC

    DEFF Research Database (Denmark)

    Baù, Matteo; Viafora, Nicola; Hansen, Chris Skovgaard

    2016-01-01

    This paper introduces Finite Element Method mod-elling techniques applied to wire armoured submarine three-core cables, whose nominal voltages range from 36 to 245 kV. The analysis is focused on the implementation of the net voltage cancellation principle in a 2D environment. The model is utilised...... in a comparative study with the IEC 60287 Standard, developed in terms of power losses, loss factors and cable ampacity. Despite the model limitations, the estimated loss factors are mainly in compliance with the state of the art, verifying the widely recognized conservatism of the IEC standard. Simulation results...

  17. General criteria for validation of dosimetry methods in the context of a quality system ISO / IEC 17025; Criterios generales sobre validacion de metodos de dosimetria en el marco de un sistema de calidad ISO/IEC 17025

    Energy Technology Data Exchange (ETDEWEB)

    Martin Garcia, R.; Navarro Bravo, T.

    2011-07-01

    The accreditation of a testing laboratory in accordance with ISO / IEC 17025 recognizes the technical competence of a laboratory to perform certain tests. One of the requirements of that rule states that laboratories must demonstrate that the methods used are valid and appropriate for the intended use and customer needs. This demonstration is accomplished through the process of validation of methods, defined in the rule it self as {sup c}onfirmation by examination and provision of objective evidence that the requirements for a particular purpose{sup .} The process of validating a test method should be well planned and documented, including the requirements under the applicable rules and criteria established by the laboratory to comply with these requirements.

  18. Monolayers of IEC-18 cells as an in vitro model for screening the passive transcellular and paracellular transport across the intestinal barrier: Comparison of active and passive transport with the human colon carcinoma Caco-2 cell line

    NARCIS (Netherlands)

    Versantvoort, C.H.M.; Ondrewater, R.C.A.; Duizer, E.; Sandt, J.J.M. van de; Gilde, A.J.; Groten, J.P.

    2002-01-01

    Purpose: previous studies have shown that the rat small intestinal cell line IEC-18 provides a size-selective barrier for paracellularly transported hydrophilic macromolecules. In order to determine the utility of IEC-18 cells as an in vitro model to screen the passive paracellular and transcellular

  19. A Method for Remote Control of EV Charging by Modifying IEC61851 Compliant EVSE Based PWM Signal

    DEFF Research Database (Denmark)

    Pedersen, Anders Bro; Martinenas, Sergejus; Andersen, Peter Bach

    2016-01-01

    The Electric Vehicle (EV) has properties that can not only load but can elevate its value as a resource to the power system. An EV represents a high-power, fast-responding flexible demand unit, with an attached energy storage (battery) and the potential for bi-directional capabilities (V2G......). These properties can be used in a number of power and energy services, which can support power system operation while lowering the cost of EV ownership. Such services depend on the support from the communications technologies and standards that connect controllers and logic in the EVs with those in the charging...... for smart charging - to gain this ability by simply adhering to the widely supported IEC61851 standard. This paper describes the solution, demonstrates the implementation and discusses the potential it has for unlocking EV power- and energy services....

  20. ISO/IEC 17025: custos de acreditação em uma universidade pública brasileira

    Directory of Open Access Journals (Sweden)

    Rodrigo S. Bender

    2017-01-01

    Full Text Available ISO/IEC 17025 is an international standard that specifies the general requirements for evaluating the competence of laboratories involved in testing and calibration. This standard brings several benefits to university laboratories, which, thus, seek to obtain the accreditation. However, although cost is one of the main obstacles in this process; this topic has not been sufficiently studied. Since the Universidade Federal de Santa Maria (UFSM supports its laboratories for the implementation of this standard, it was chosen for this article to identify and quantify the accreditation costs of its laboratories that have obtained it or are working toward the goal. An exploratory literature review was carried out, and the data gathered were analyzed qualitatively and quantitatively. This study observed that the costs related to hours worked are linked to staff qualification and that high expenses in equipment and infrastructure occur in laboratories that receive financial resources from external providers.

  1. Evaluation of a LiF:Mg,Ti thermoluminescent ring dosimeter according to the IEC 62387:2012 Standards

    Science.gov (United States)

    Oliveira, Edyelle L. B.; de Barros, Vinícius S. M.; Asfora, Viviane K.; Khoury, Helen J.

    2018-03-01

    This work shows results of type testing of a ring radiation dosimeter system under IEC 62387:2012. The personal dosimeter investigated in this work consists of a commercial one element plastic ring which contains an LiF:Mg,Ti thermoluminescent pellet. By applying requirements for statistical fluctuations and linearity, a minimum measurable dose in Hp(0.07) was established. Energy and angular dependence aided in determining energy correction factors and fading requirements were used to select the most appropriate preheat scheme. Type testing of passive radiation monitors was performed in the Radiation Metrology Laboratory (LMRI-DEN/UFPE) of the Federal University of Pernambuco and is a major step in Brazil for the independent evaluation of these dosimeters, currently not available in the country.

  2. Usability and Safety of Software Medical Devices: Need for Multidisciplinary Expertise to Apply the IEC 62366: 2007.

    Science.gov (United States)

    Bras Da Costa, Sabrina; Beuscart-Zéphir, M C; Bastien, J-M Christian; Pelayo, Sylvia

    2015-01-01

    Software medical devices must now comply with the "ergonomics" essential requirement of the Medical Device Directive. However, the usability standard aiming to guide the manufacturers is very difficult to understand and apply. Relying on a triangulation of methods, this study aims to highlight the need to combine various expertises to be able to grasp the standard. To identify the areas of expertise on which the usability standard relies, an analytical review of this document was performed as well as an analysis of a discussion forum dedicated to it and an analysis of a case study of its application for CE marking. The results show that the IEC 62366 is a usability standard structured as a risk management one. It obviously requires Human Factors/Ergonomics expertise to be able to correctly identify and prevent risks of use errors, but it also requires risk management expertise to be able to grasp the issues of the risk analysis and master the related methods.

  3. Community-based IEC campaign. TFR has dropped to 2.15 in Binh Thanh District, Ho Chi Minh City.

    Science.gov (United States)

    Nguyen Ngoc Lich

    1995-01-01

    Binh Thanh District of Ho Chin Minh City in 1989 had a crude birth rate (CBR) of 20.3 per 1000 population and an average of 5.5 persons per household. The rate of total fertility (TFR) in the district was one of the highest among the city's 18 districts in 1990. Concerned about these demographics, the Binh Thanh District Committee for Population and Family Planning reviewed the family planning program with the goal of developing a special information, education, and communication (IEC) campaign. The following incentive scheme for sterilization was developed: each poor entrepreneur in need of seed money for new business ventures who allows himself to be sterilized receives dong 120,000 (US$11) from the National Committee for Population and Family Planning and dong 220,000 from the District Committee for Population and Family Planning to buy medicine and supplementary food. An IEC room was established in each commune health center to disseminate the relevant information. The results of the campaign have been positive, with 910 people requesting sterilization in 1994, 34% of whom were male. Over the period January-April 1995, the proportion of male sterilization increased dramatically, such that men accounted for 68% of the 153 people who underwent sterilization. The district now ranks the lowest among the 18 districts with regard to the percentage of couples with three children, the CBR is 15.3/1000, TFR is 2.15, the contraceptive prevalence rate is 68%, and sterilization is the fourth most popular method of contraception (13%) behind the IUD (37%), condom (30%), and oral pill (18.5%).

  4. Augmented internalisation of ferroportin to late endosomes impairs iron uptake by enterocyte-like IEC-6 cells.

    Science.gov (United States)

    Oates, Phillip S; Thomas, Carla

    2005-08-01

    Absorption of iron occurs by duodenal enterocytes, involving uptake by the divalent metal transporter-1 (DMT1) and release by ferroportin. Ferroportin responds to the hepatocyte-produced 25-amino-acid-peptide hepcidin-25 by undergoing internalisation to late endosomes that impair iron release. Ferroportin is also expressed on the apical membrane of polarised Caco-2 cells, rat intestinal cells and in IEC-6 cells (an intestinal epithelial cell line). A blocking antibody to ferroportin also impairs the uptake, but not the release, of iron. In this study IEC-6 cells were used to study the mechanism of impairment or recovery from impairment produced by the blocking antibody and the fate of DMT1 and ferroportin. Uptake of 1 muM Fe(II) was studied by adding the antibody from time 0 and after adding or removing the antibody once a steady state had been reached. Surface binding, maximum iron transport rate V(max) and transporter affinity (K(m)) were measured after impairment of iron uptake. Ferroportin and DMT1 distribution were assessed by immunofluorescence microscopy. Antibody-mediated impairment, or recovery from impairment, of Fe(II) uptake occurred within minutes. Impairment was lost when the antibody was combined with the immunizing peptide. DMT1 and ferroportin undergo internalisation to late endosomes and, in the presence of the antibody, augmented internalisation of DMT1 and ferroportin caused swelling of late endosomes. Surface binding of Fe(II) and iron transport V(max) were reduced by 50%, indicating that the antibody removed membrane-bound DMT1. The ferroportin antibody induced rapid turnover of membrane ferroportin and DMT1 and its internalisation to late endosomes, resulting in impaired Fe(II) uptake.

  5. Word classes

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2007-01-01

    This article provides an overview of recent literature and research on word classes, focusing in particular on typological approaches to word classification. The cross-linguistic classification of word class systems (or parts-of-speech systems) presented in this article is based on statements found...... in grammatical descriptions of some 50 languages, which together constitute a representative sample of the world’s languages (Hengeveld et al. 2004: 529). It appears that there are both quantitative and qualitative differences between word class systems of individual languages. Whereas some languages employ...... a parts-of-speech system that includes the categories Verb, Noun, Adjective and Adverb, other languages may use only a subset of these four lexical categories. Furthermore, quite a few languages have a major word class whose members cannot be classified in terms of the categories Verb – Noun – Adjective...

  6. Coding Class

    DEFF Research Database (Denmark)

    Ejsing-Duun, Stine; Hansbøl, Mikala

    Denne rapport rummer evaluering og dokumentation af Coding Class projektet1. Coding Class projektet blev igangsat i skoleåret 2016/2017 af IT-Branchen i samarbejde med en række medlemsvirksomheder, Københavns kommune, Vejle Kommune, Styrelsen for IT- og Læring (STIL) og den frivillige forening......, design tænkning og design-pædagogik, Stine Ejsing-Duun fra Forskningslab: It og Læringsdesign (ILD-LAB) ved Institut for kommunikation og psykologi, Aalborg Universitet i København. Vi har fulgt og gennemført evaluering og dokumentation af Coding Class projektet i perioden november 2016 til maj 2017....... Coding Class projektet er et pilotprojekt, hvor en række skoler i København og Vejle kommuner har igangsat undervisningsaktiviteter med fokus på kodning og programmering i skolen. Evalueringen og dokumentationen af projektet omfatter kvalitative nedslag i udvalgte undervisningsinterventioner i efteråret...

  7. 14th EuCheMS International Conference on Chemistry and the Environment ICCE 2013: IEC-WTC, Barcelona, Spain, 25-28 June 2013.

    Science.gov (United States)

    Luis, Santiago V; Jover, Eric

    2014-10-01

    The 14th European Association of Chemical and Molecular Sciences (EuCheMS) International Conference on Chemistry and the Environment (ICCE 2013) took place on 25-28 June 2013 at the IEC and the WTC in Barcelona, Spain. The ICCE is a well-established biannual conference organized by the Division of Chemistry and the EuCheMS.

  8. Automatizace rozvodny VN s využitím řídicího systému COM600 a standardu IEC61850

    OpenAIRE

    Havelka, Tomáš

    2016-01-01

    Předkládaná práce se zabývá problematikou standardu IEC 61850 zvláště jeho kapitolou IEC 61850- 9-2 LE. Kapitola IEC 61850-9-2 LE je spíše známá jako komunikace Process bus. V práci jsou popsány rozšiřující nástroje použité v řídicím systému COM 600 a jejich detailní konfigurace. Dále se práce zabývá konfigurací standardu IEC 61850- 9-2 LE v ochranných terminálech rodiny Relion a její následné implementaci do řídicího systému COM 600. Hlavním cílem předkládané práce je konfigurování standardu...

  9. RBMK nuclear reactors: Proposals for instrumentation and control improvements to enhanced safety and availability. IEC technical report of type 3. Working material

    International Nuclear Information System (INIS)

    1995-01-01

    The present material presents a CD+V draft report ''RBMK nuclear reactors: Proposals for instrumentation and control improvements to enhance safety and availability'' prepared by the Joint IEC/IAEA team during 1993-1995. Experience has demonstrated the need to improve the safety instrumentation of the RBMK type reactors using well proven modern technology. The working group identified the upgrades and changes of the highest priority based on the evaluation of the RBMK systems and the events where the instrumentation was found to be inadequate for safe operation. The subjects discussed in this document were not selected on a systematic basis but were selected by the IEC and IAEA experts as considered to be appropriate to the activities of the IEC and for which technical experience was available. The items identified therefore do not reflect any ranking of the safety issues or any priority or impact on safety of any of the measures were they to be implemented. Many important safety issued and areas where physical measures are required to improve safety have been omitted and indeed not even acknowledged in this document. The recommendations presented in the document differ from those normally produced by the IEC in the form of standards as they are of a transitory nature and some have already been overtaken by the continuing process of improvements to plant safety. Figs and tabs

  10. Comparison of IEEE383-2003 and IEC60505-2004 standards for harmonization of environmental qualification procedure of electric cable

    International Nuclear Information System (INIS)

    Kim, Jong Seog; Jeong, Sun Chul; Park, Kyung Heum; Jang, Kyung Nam

    2010-01-01

    Needs for harmonization of international equipment qualification(EQ) standards have been raised several years due to purchasing problem of nuclear equipment supplied from abroad country. To meet the regulatory requirement of domestic nuclear power plant, manufacturers have to qualify their equipment in accordance with each standard such as IEEE, IEC and RCC-E. Double qualification increase the equipment cost, which result in high construction cost. Even the unification of each standard have been discussed several years, we have got the long way to go yet. Comparison and harmonization of each international standard will give help to purchase the equipment qualified by not endorsed standard. Environmental qualification, seismic qualification and EMI/EMC qualification are major targets for harmonization. Since concern about cable qualification of 60 years life has been raised recently, harmonization of cable qualification standard also needs to be discussed. KEPRI launched a project for harmonization of EQ relative standards such as IEEE, IEC and RCC-E. A study for harmonization of IEEE323 and IEC60780 is known in progress by IEEE committee. In this paper, harmonization of international standards for cable qualification will be discussed. IEEE383 standard is qualification standard for electric cable broadly used in Asian pacific area while IEC60505 is mostly used in European area. Since these two standards have different requirements for environmental qualification of cable, problem can be happened in the plant site when they purchase cable qualified by not endorsed standard. IEEE383-2003 and IEC60505-2004 is the latest version of each standard. Comparison results and recommendations for harmonization of these two standards are introduced herein

  11. Is Focus on Prevention Missing in National Health Programs? A Situation Analysis of IEC/BCC/Health Promotion Activities in a District Setting of Punjab and Haryana.

    Science.gov (United States)

    Thakur, Jarnail Singh; Jaswal, Nidhi; Grover, Ashoo

    2017-01-01

    Health promotion (HP) has been an integral part of all national programs although it has been a low priority in India, which has resulted in a failure to achieve the desired results. Situation analysis of information education communication (IEC)/behavior change communication (BCC)/HP activities within the existing national health programs was undertaken in the district of Hoshiarpur in Punjab and the district of Ambala in Haryana during 2013-14. Facility-based assessments were done by conducting in-depth interviews with stakeholders, program officers, medical officers, health workers, and counselors. Household survey (332 individuals) and exit interview (102 interviews) were conducted to assess the knowledge of the community regarding key risk factors. There was a high vacancy in the mass media division with 40% (2 out of 5) and 89% (8 out of 9) of the sanctioned positions vacant in Hoshiarpur and Ambala, respectively, with low capacity of staff and budget. There was no annual calendar, logbook of activities with poor recording of IEC material received and disseminated. The knowledge of community members regarding key risk factors such as tobacco use, salt intake, blood pressure level, anemia, and tuberculosis was 77.3%, 26.4%, 16.4%, 32.7%, and 91.8%, respectively, in the district of Ambala as compared to 77.5%, 37.5%, 33.3%, 25.8%, and 88.3%, respectively, in the district of Hoshiarpur. The village health and sanitation committee (VHSC) in the district of Hoshiarpur and village level core committee (VLCC) in the district of Ambala were found to be nonfunctional with no Iec/Bcc activities in the covered villages in the last month. Monitoring and supervision of Iec/Bcc activities were poor in both the districts. Iec/Bcc/HP is a neglected area in national health programs in the selected districts with inadequate budget, human resources with poor implementation, and requires strengthening for better implementation of the national health programs.

  12. Social Classes

    DEFF Research Database (Denmark)

    Aktor, Mikael

    2018-01-01

    , and the Vaiśyas, the fourth underprivileged class, the Śūdras, and, at the bottom of the society, the lowest so-called ‘untouchable’ castes. It also discusses the understanding of human differences that lies at the center of the system and the possible economic and political motivations of the Brahmin authors......The notions of class (varṇa) and caste (jāti) run through the dharmaśāstra literature (i.e. Hindu Law Books) on all levels. They regulate marriage, economic transactions, work, punishment, penance, entitlement to rituals, identity markers like the sacred thread, and social interaction in general....... Although this social structure was ideal in nature and not equally confirmed in other genres of ancient and medieval literature, it has nevertheless had an immense impact on Indian society. The chapter presents an overview of the system with its three privileged classes, the Brahmins, the Kṣatriyas...

  13. Social Classes

    DEFF Research Database (Denmark)

    Aktor, Mikael

    2018-01-01

    The notions of class (varṇa) and caste (jāti) run through the dharmaśāstra literature (i.e. Hindu Law Books) on all levels. They regulate marriage, economic transactions, work, punishment, penance, entitlement to rituals, identity markers like the sacred thread, and social interaction in general....... Although this social structure was ideal in nature and not equally confirmed in other genres of ancient and medieval literature, it has nevertheless had an immense impact on Indian society. The chapter presents an overview of the system with its three privileged classes, the Brahmins, the Kṣatriyas......, and the Vaiśyas, the fourth underprivileged class, the Śūdras, and, at the bottom of the society, the lowest so-called ‘untouchable’ castes. It also discusses the understanding of human differences that lies at the center of the system and the possible economic and political motivations of the Brahmin authors...

  14. HACIA LA EXTENSION DEL MÉTODO GRAY WATCH BASADO EN EL ESTÁNDAR DE CALIDAD ISO/IEC 25010 // TOWARDS THE EXTENSION OF THE GRAY WATCH METHOD BASED ON THE QUALITY STANDARD ISO/IEC 25010

    Directory of Open Access Journals (Sweden)

    Jorge Luis Pérez-Medina

    2012-06-01

    Full Text Available Talk about software quality implies the need to rely on parameters that should allow to establish the minimal levels that a product of this type must reach in order to be considered of quality. This paper aims to propose an extension of the method GRAY WATCH, specifically in the technical processes of Analysis and Design connecting the products obtained to the process of Implementation. The orientation of our proposal consists of using the standard of product quality ISO/IEC 25010, which establishes criteria for the specification of quality requirements of software products, their metrics and evaluation, and includes a quality model composed by characteristics and subcharacteristics. The result of this proposal, adds significant value to the extended method, Allowing to system analysts and Computer professionals to specify the precise activities to be performed to obtain quality requirements. To make this work we have supported our efforts in the Domain Engineering process based in Software Quality named InDoCaS as methodology for the definition of activities and products in the processes of Analysis, Design and Implementation of the Application.// RESUMEN: Hablar de calidad de software implica la necesidad de contar con parámetros que permitan establecer los niveles mínimos que un producto de este tipo debe alcanzar para que se considere de calidad. El presente articulo tiene como finalidad proponer una extension del método GRAY WATCH, especificamente en los procesos técnicos de análisis y diseño acoplando los productos obtenidos al proceso de implementación. La orientación de nuestra propuesta consiste en utilizar el estándar de calidad del producto ISO/IEC 25010, que establece criterios para la especificacion de requisitos de calidad de productos de software, sus métricas y su evaluación, e incluye un modelo de calidad compuesto por características y subcaracteristicas. El resultado de esta propuesta, agrega un valor importante al

  15. Interferon-γ induces expression of MHC class II on intestinal epithelial cells and protects mice from colitis.

    Directory of Open Access Journals (Sweden)

    Christoph Thelemann

    Full Text Available Immune responses against intestinal microbiota contribute to the pathogenesis of inflammatory bowel diseases (IBD and involve CD4(+ T cells, which are activated by major histocompatibility complex class II (MHCII molecules on antigen-presenting cells (APCs. However, it is largely unexplored how inflammation-induced MHCII expression by intestinal epithelial cells (IEC affects CD4(+ T cell-mediated immunity or tolerance induction in vivo. Here, we investigated how epithelial MHCII expression is induced and how a deficiency in inducible epithelial MHCII expression alters susceptibility to colitis and the outcome of colon-specific immune responses. Colitis was induced in mice that lacked inducible expression of MHCII molecules on all nonhematopoietic cells, or specifically on IECs, by continuous infection with Helicobacter hepaticus and administration of interleukin (IL-10 receptor-blocking antibodies (anti-IL10R mAb. To assess the role of interferon (IFN-γ in inducing epithelial MHCII expression, the T cell adoptive transfer model of colitis was used. Abrogation of MHCII expression by nonhematopoietic cells or IECs induces colitis associated with increased colonic frequencies of innate immune cells and expression of proinflammatory cytokines. CD4(+ T-helper type (Th1 cells - but not group 3 innate lymphoid cells (ILCs or Th17 cells - are elevated, resulting in an unfavourably altered ratio between CD4(+ T cells and forkhead box P3 (FoxP3(+ regulatory T (Treg cells. IFN-γ produced mainly by CD4(+ T cells is required to upregulate MHCII expression by IECs. These results suggest that, in addition to its proinflammatory roles, IFN-γ exerts a critical anti-inflammatory function in the intestine which protects against colitis by inducing MHCII expression on IECs. This may explain the failure of anti-IFN-γ treatment to induce remission in IBD patients, despite the association of elevated IFN-γ and IBD.

  16. Birthing Classes

    Science.gov (United States)

    ... management options. Breastfeeding basics. Caring for baby at home. Birthing classes are not just for new parents, though. ... midwife. Postpartum care. Caring for your baby at home, including baby first aid. Lamaze One of the most popular birthing techniques in the U.S., Lamaze has been around ...

  17. Class Trash.

    Science.gov (United States)

    Chemecology, 1992

    1992-01-01

    Presents a classroom activity in which students calculate the amount and types of trash thrown out by their class at school to investigate how much trash is generated, where it goes, and speculate about alternatives. Students need to be familiar with the concepts of weight, volume, and numbers. (MCO)

  18. Class size versus class composition

    DEFF Research Database (Denmark)

    Jones, Sam

    Raising schooling quality in low-income countries is a pressing challenge. Substantial research has considered the impact of cutting class sizes on skills acquisition. Considerably less attention has been given to the extent to which peer effects, which refer to class composition, also may affect...... outcomes. This study uses new microdata from East Africa, incorporating test score data for over 250,000 children, to compare the likely efficacy of these two types of interventions. Endogeneity bias is addressed via fixed effects and instrumental variables techniques. Although these may not fully mitigate...

  19. Post-translational inhibition of IP-10 secretion in IEC by probiotic bacteria: impact on chronic inflammation.

    Directory of Open Access Journals (Sweden)

    Gabriele Hoermannsperger

    Full Text Available BACKGROUND: Clinical and experimental studies suggest that the probiotic mixture VSL#3 has protective activities in the context of inflammatory bowel disease (IBD. The aim of the study was to reveal bacterial strain-specific molecular mechanisms underlying the anti-inflammatory potential of VSL#3 in intestinal epithelial cells (IEC. METHODOLOGY/PRINCIPAL FINDINGS: VSL#3 inhibited TNF-induced secretion of the T-cell chemokine interferon-inducible protein (IP-10 in Mode-K cells. Lactobacillus casei (L. casei cell surface proteins were identified as active anti-inflammatory components of VSL#3. Interestingly, L. casei failed to block TNF-induced IP-10 promoter activity or IP-10 gene transcription at the mRNA expression level but completely inhibited IP-10 protein secretion as well as IP-10-mediated T-cell transmigration. Kinetic studies, pulse-chase experiments and the use of a pharmacological inhibitor for the export machinery (brefeldin A showed that L. casei did not impair initial IP-10 production but decreased intracellular IP-10 protein stability as a result of blocked IP-10 secretion. Although L. casei induced IP-10 ubiquitination, the inhibition of proteasomal or lysosomal degradation did not prevent the loss of intracellular IP-10. Most important for the mechanistic understanding, the inhibition of vesicular trafficking by 3-methyladenine (3-MA inhibited IP-10 but not IL-6 expression, mimicking the inhibitory effects of L. casei. These findings suggest that L. casei impairs vesicular pathways important for the secretion of IP-10, followed by subsequent degradation of the proinflammatory chemokine. Feeding studies in TNF(DeltaARE and IL-10(-/- mice revealed a compartimentalized protection of VSL#3 on the development of cecal but not on ileal or colonic inflammation. Consistent with reduced tissue pathology in IL-10(-/- mice, IP-10 protein expression was reduced in primary epithelial cells. CONCLUSIONS/SIGNIFICANCE: We demonstrate segment

  20. Quality control methodology and implementation of X-radiation standards beams, mammography level, following the standard IEC 61267

    International Nuclear Information System (INIS)

    Correa, Eduardo de Lima

    2010-01-01

    In this work it was developed and applied a quality control program of the X radiation system (160 kV, constant potential, target of tungsten) of the Calibration Laboratory of IPEN(LCI) in the energy range relative to mammography beams (from 25 kV to 35 kV). The X radiation standards beams, level mammography, using molybdenum and aluminum as additional filtration, were established after the application of this quality control program following national and international recommendations. The reference ionization chamber has traceability to PTB and was regularly submitted to quality control tests for evaluation and analysis of its performance. The radiation qualities emerging from the X-radiation assembly (RQR-M), based on a phantom made up of an aluminum added filter (RQA-M), narrow beam condition (RQN-M) and broad beam condition (RQB-M), following the recommendations of the international standard IEC 61267 (2005) and the IAEA code of practice, TRS 457 (2007) were established. For the implantation of RQN-M and RQB-M radiation qualities, two mammography phantoms were developed. The half-value layers found are those presented by the German primary laboratory PTB, and varied from 0.35 to 1.21 mm Al. The air kerma rates were obtained for all the 15 implanted qualities. (author)

  1. On the right track. The integrated IEC campaign succeeds in recruiting many acceptors in a fishing commune.

    Science.gov (United States)

    Hata, K

    1995-01-01

    The Population and Family Planning Committee of Quangnam Danang Province's integrated information, education, and communication (IEC) campaign promotes late marriage, having two children, and spacing births from 3 to 5 years. The total fertility rate (TFR) in the province is 3.4. One urgent priority of the committee is to tackle poverty by reducing the rapid rate of natural population increase in rural areas. Xa Cam Ha is a poor, rice-producing commune of population 11,114 in which family planning used to be widely unaccepted among families. TFR in the commune is now slightly less than 3. The steady promotion of the Population and Family Planning Program has encouraged couples to accept and practice family planning such that the rate of natural increase fell from 2.0% in 1985 to 1.8% in 1994. Financial incentives are also offered to family planning acceptors; poor acceptors are eligible for loans from the People's Committee to start income-generating activities. More and more couples are accepting family planning.

  2. Availability of systems with self-diagnostic components--applying Markov model to IEC 61508-6

    International Nuclear Information System (INIS)

    Zhang Tieling; Long, Wei; Sato, Yoshinobu

    2003-01-01

    Of all the techniques applicable to safety-related analyses, each one may be adaptable to some aspects of the system safety behavior. On the other hand, some of them can fit to analysis on one aspect of the system behavior concerning risk, but they do not always lead to the same results. Rouvroye and Brombacher made a comparison of these techniques and indicated that Markov and Enhanced Markov analysis techniques can cover most aspects of system's safety-related behavior. According to their conclusion, the Markov method is introduced to Part 6 of the standard IEC 61508 for quantitative analysis in this paper. The purpose is to present explanation in details for solutions given in the standard because there are not clear descriptions for many results and it is not easy for a safety engineer to find the clue. In addition, the down time t c1 shown in the standard is newly defined because it is the basis to get the results of average probability of failure on demand of system architectures and its meaning is not clearly explained. Through derivation, however, a discrepancy is found in the standard. From this point of view, new suggestions are proposed based on the results obtained

  3. IEC 61267: Feasibility of type 1100 aluminium and a copper/aluminium combination for RQA beam qualities.

    Science.gov (United States)

    Leong, David L; Rainford, Louise; Zhao, Wei; Brennan, Patrick C

    2016-01-01

    In the course of performance acceptance testing, benchmarking or quality control of X-ray imaging systems, it is sometimes necessary to harden the X-ray beam spectrum. IEC 61267 specifies materials and methods to accomplish beam hardening and, unfortunately, requires the use of 99.9% pure aluminium (Alloy 1190) for the RQA beam quality, which is expensive and difficult to obtain. Less expensive and more readily available filters, such as Alloy 1100 (99.0% pure) aluminium and copper/aluminium combinations, have been used clinically to produce RQA series without rigorous scientific investigation to support their use. In this paper, simulation and experimental methods are developed to determine the differences in beam quality using Alloy 1190 and Alloy 1100. Additional simulation investigated copper/aluminium combinations to produce RQA5 and outputs from this simulation are verified with laboratory tests using different filter samples. The results of the study demonstrate that although Alloy 1100 produces a harder beam spectrum compared to Alloy 1190, it is a reasonable substitute. A combination filter of 0.5 mm copper and 2 mm aluminium produced a spectrum closer to that of Alloy 1190 than Alloy 1100 with the added benefits of lower exposures and lower batch variability. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  4. Elaboración de un plan de implementación de la ISO/IEC 27001:2013 en la IES

    OpenAIRE

    Plaza Cordero, Andrea Maricela

    2015-01-01

    El presente trabajo fin de máster consiste en la elaboración de un plan de implementación bajo la norma ISO/IEC 27001:2013 para un instituto de educación secundaria, ya que la misma es genérica y por ende aplicable en cualquier tipo de empresa. El present treball fi de màster consisteix en l'elaboració d'un pla d'implementació sota la norma ISO/IEC 27001:2013 per a un institut d'educació secundària, ja que la mateixa és genèrica i per tant aplicable a qualsevol tipus d'empresa. This fin...

  5. Elaboración de un plan de implementación de la norma ISO/IEC 27001:2013

    OpenAIRE

    Arcos Argudo, Miguel

    2014-01-01

    El presente trabajo consiste en la implementación de un SGSI basado en la norma ISO/IEC 27001:2013 en un empresa que se ha interesado en proteger su información mediante la identificación de los riesgos a los que está expuesta, y la definición de procesos para controlar dichos riesgos, así como determinar un plan de mejora continua para la seguridad de su información. Aquest treball consisteix en la implementació d'un SGSI basat en la norma ISO/IEC 27001:2013 en un empresa que s'ha interes...

  6. Using IEC 61850 GOOSE Service for Adaptive ANSI 67/67N Protection in Ring Main Systems with Distributed Energy Resources

    Directory of Open Access Journals (Sweden)

    Ángel Silos

    2017-10-01

    Full Text Available Smart Grids are electricity networks that use digital technology to co-ordinate the needs and capabilities of all generators, grid operators, end users and electricity market stakeholders in such a way that it can optimize asset utilization and operation while maintaining system reliability, resilience and stability. However, Smart Grids are increasingly proposing a much more distributed architecture with the integration of multiple Distributed Energy Resources (DERs that demand different control and protection schemes. In that sense, the implementation of standards such as IEC 61850 and the integration with Ethernet-based communication networks provide novel tools to manage DER efficiently. This paper analyses the potential usage and benefits of ANSI 67/67N protection in combination with Generic Object Oriented Substation Event (GOOSE communication service, from the standard 61850 of the International Electro-technical Commission (IEC, for providing adaptive network protection, specifying the configuration and implementation and exposing the obtained results.

  7. Analisis Sistem Manajemen Keamanan Informasi Menggunakan ISO/IEC 27001 : 2013 Serta Rekomendasi Model Sistem Menggunakan Data Flow Diagram pada Direktorat Sistem Informasi Perguruan Tinggi

    OpenAIRE

    Yuni Cintia Yuze; Yudi Priyadi; Candiwan .

    2016-01-01

    The importance of information and the possible risk of disruption, therefore the universities need to designed and implemented of the information security.  One of the standards that can be used to analyze the level of information security in the organization is ISO/IEC 27001 : 2013 and this standard has been prepared to provide requirements for establishing, implementing, maintaining and continually improving an information security management system. The objective of this research is to mea...

  8. Cybersécurité des sous-stations électriques IEC 61850 : Présentation de travaux de thèse

    OpenAIRE

    Mocanu, Stéphane; Kabir-Querrec, Maëlle; Thiriet, Jean-Marc; Savary, Eric

    2015-01-01

    National audience; Présentation du projet de recherche d'une thèse intitulée "Cybersécurité du smart-grids". Les travaux en cours qui sont présentés ici concernent en particulier la cybersécurité des systèmes et réseaux de communication de systèmes d'automatisation des postes électriques IEC 61850.

  9. Arquitectura flexible basada en ISA 88 para el diseño del diagrama de control de ejecución en aplicaciones distribuidas usando IEC 61499

    Directory of Open Access Journals (Sweden)

    Fabricio Chicaiza

    2018-03-01

    Full Text Available En la actualidad los sistemas de automatización industrial deben optimizar las técnicas de control y comunicación de sus procesos, para introducir conceptos dados por la Industria 4.0. Para lograr esto se necesita de la introducción de nuevas normas de automatización para obtener sistemas de fabricación ágiles e inteligentes, es por esto que la norma IEC 61499 es considerada como la opción principal. Industria 4.0 en unión con IEC 61499 permitirá la integración de sistemas de adquisición de datos tradicionales y novedosos sistemas de procesamiento inteligente de datos, con el objetivo de extraer información y mejorar el rendimiento general del sistema productivo. El presente trabajo establece un enfoque de arquitectura flexible para el diseño de los Diagramas de Control de Ejecución de los Bloques de Función basado en la norma ISA 88 aplicado a un proceso industrial, lo que permitirá implementar el control industrial bajo IEC 61499 de manera eficiente y rápida permitiendo un diseño se software basado en componentes con independencia de la plataforma hardware usada.

  10. A quality assurance system for personal monitoring in Ireland: experience to date and transition from EN 45001 to ISO/IEC 17025

    International Nuclear Information System (INIS)

    Currivan, L.; Spain, D.; Rafferty, B.

    2002-01-01

    Up to 2000 the RPII was the competent authority for approval of dosimetry services operating within Ireland. However the transposition into Irish Law of Council Directive 96/29 Euratom in May 2000 means that dosimetry services operating in Ireland must now attain accreditation to the standard of EN-45001 or its equivalent. To comply with this new legislation the RPII sought accreditation for the Dosimetry Service from the Irish National Accreditation Board (NAB). In accordance with the EN-45000 series of European Standards and the relevant ISO guides NAB tests accuracy of results and accredits organisations as appropriate. In September 2000 accreditation was granted to the Dosimetry Service for individual monitoring of personnel who are occupationally exposed to ionising radiation. The scope of the accreditation covers the evaluation of personal doses, for photon and beta, using TLD. Frequent internal quality audits, together with periodic inter-laboratory test programmes, ensure that these quality standards are maintained. This accreditation fulfils the approval under legislation for dosimetry services. The new standard, ISO/IEC 17025, was introduced by ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) in 1999. This standard was introduced in Ireland by NAB and will be implemented for future assessments. The aim of this paper is to describe the quality system currently operated by the RPII's Dosimetry Service, our practical experience to date, and to outline the transition from EN-45001 to ISO/IEC 17025

  11. Is focus on prevention missing in national health programs? A situation analysis of IEC/BCC/Health promotion activities in a district setting of Punjab and Haryana

    Directory of Open Access Journals (Sweden)

    Jarnail Singh Thakur

    2017-01-01

    Full Text Available Context: Health promotion (HP has been an integral part of all national programs although it has been a low priority in India, which has resulted in a failure to achieve the desired results. Settings and Design: Situation analysis of information education communication (IEC/behavior change communication (BCC/HP activities within the existing national health programs was undertaken in the district of Hoshiarpur in Punjab and the district of Ambala in Haryana during 2013-14. Materials and Methods: Facility-based assessments were done by conducting in-depth interviews with stakeholders, program officers, medical officers, health workers, and counselors. Household survey (332 individuals and exit interview (102 interviews were conducted to assess the knowledge of the community regarding key risk factors. Results: There was a high vacancy in the mass media division with 40% (2 out of 5 and 89% (8 out of 9 of the sanctioned positions vacant in Hoshiarpur and Ambala, respectively, with low capacity of staff and budget. There was no annual calendar, logbook of activities with poor recording of IEC material received and disseminated. The knowledge of community members regarding key risk factors such as tobacco use, salt intake, blood pressure level, anemia, and tuberculosis was 77.3%, 26.4%, 16.4%, 32.7%, and 91.8%, respectively, in the district of Ambala as compared to 77.5%, 37.5%, 33.3%, 25.8%, and 88.3%, respectively, in the district of Hoshiarpur. The village health and sanitation committee (VHSC in the district of Hoshiarpur and village level core committee (VLCC in the district of Ambala were found to be nonfunctional with no Iec/Bcc activities in the covered villages in the last month. Monitoring and supervision of Iec/Bcc activities were poor in both the districts. Conclusions: Iec/Bcc/HP is a neglected area in national health programs in the selected districts with inadequate budget, human resources with poor implementation, and requires

  12. Knowledge, attitude, behaviour and practices (KABP) of the community and resultant IEC leading to behaviour change about dengue in Jodhpur City, Rajasthan.

    Science.gov (United States)

    2016-01-01

    In recent years dengue has been witnessed as an emerging public health problem. Therefore, the present study was undertaken in order to assess the knowledge, attitude, behaviour and practices (KABP) adopted by the society for its control and prevention. The changes in behaviour of community after imparting health education were also recorded to determine the effectiveness of information, education and communication (IEC) for dengue prevention and control in Jodhpur City of Rajasthan, India. A threefold study was conducted in Jodhpur City regarding KABP about dengue fever amongst the community. Out of 106 cases of dengue reported from Jodhpur City in the year 2008, only 20 households (HHs) could be located. Therefore, nine HHs around one dengue positive household were selected so as to cover the sample size of 200 HHs for eliciting information through structured recorded interview-schedule. Health education as provided through audiovisuals and group discussion etc. and resultant change in KABP was recorded again through interview of respondents from 100 households. Prevention from dengue mosquito bites through mats and liquid vaporizer was known to 32 and 22% HHs respectively. Inhabitants of 87% HHs preferred to visit private health facility, 85% of HHs were not aware about the symptoms of dengue, while74% HHs stated that dengue mosquito breeds in dirty water. Awareness about source of mosquito breeding and source reduction was found to be very poor, i.e. 3 and 13% which improved to 78 and 88% respectively after undertaking IEC activities. Being urban area, the economic condition and education level were somewhat similar and satisfactory in Jodhpur City. IEC resulted in significant improvement in knowledge about transmission, breeding habitats of mosquito transmitting dengue, source reduction and health treatment seeking behaviour at government facility. Through such mass awareness programmes in the communities, desired results in prevention and control of dengue

  13. Qualidade e educação superior: a norma de qualidade para a aprendizagem, educação e formação: ISO/IEC 19796-1 = Quality and Higher Education: the standard ISO/IEC 19796-1 for learning, education and training

    Directory of Open Access Journals (Sweden)

    Viebrantz, Rosalir

    2009-01-01

    Full Text Available Em 2005, uma nova norma de qualidade para a aprendizagem, educação e formação, a ISO/IEC 19796-1, foi publicada. O objetivo desta norma é orientar as organizações educacionais e desenvolver sistemas de qualidade e melhorar a qualidade dos seus processos, produtos e serviços. Este artigo busca entender a norma com base em conceitos de qualidade e na tendência à garantia da qualidade. A ISO/IEC é apresentada de forma sucinta, mostrando a metodologia e suas vantagens para as organizações educacionais. É ressaltado que a norma é um modelo de referência e necessita ser adaptada às necessidades e exigências de cada organização

  14. Evaluation of the central libraries information security management at governmental universities located in Tehran, according to the international standard ISO/IEC 27002

    Directory of Open Access Journals (Sweden)

    Milad Malekolkalami

    2014-02-01

    Full Text Available This study assessed the evaluation of information security management status in central Libraries of governmental universities located in Tehran, according to ISO / I.E.C. 27002. Research method applied for the study is descriptive Survey and a questionnaire was used for collecting information. The questionnaire was distributed between the 74 central library managers of governmental universities in Tehran according to the recent list on the website of Ministry of Science, Research and Technology, that includes 39 components based on 11 indicators of the standard ISO/ I.E.C. 27002. Analysis of data has been done by using both descriptive and inferential statistics by Microsoft Excel 2007and SPSS statistical softwares. The results of research showed that the mean for libraries in 11 indexes are as follows: The mean for the first index, Security policy, is 3.91 , in the second index, organization of information security, is 4.23, in the third index, asset security management, is 4.38, in the fourth index, Human Resources Security management, is 4, in the fifth index, physical and environment Security management, is 4.07, in the sixth index, operations management and communications, is 4.15, in the Seventh index, access controls management, is 4.38, in the eighth index, information system acquisition, development and maintenance, is 3.92, in the ninth index, information security incident management, is 3.84, in the tenth index, business continuity management, is 3.46, in the eleventh index, compliance, is 3.69 that match with the standard ISO / IEC. 27002. The results of Research shown that totally mean for standard ISO/I.E.C. 27002 in the field of information security management in the central libraries, is 4 being in a good condition and there is no significant differences between the performance of the Central libraries of the governmental Universities in Tehran, since It is not observed significant difference between them in the field of

  15. Elaboración de un plan de implementación de la ISO/IEC 27001:2013 en un ayuntamiento

    OpenAIRE

    Tur Hartmann, Juan Enrique

    2016-01-01

    El objeto del presente documento es desarrollar el plan de implementación de la ISO/IEC 27001:2013 en un ayuntamiento. Se trata de un aspecto clave en cualquier organización que desea alinear sus objetivos y principios de seguridad a la normativa internacional de referencia. El principal objetivo es sentar las bases del proceso de mejora continua en materia de seguridad de la información, permitiendo a las organizaciones conocer el estado de la misma y plantear las acciones necesarias para mi...

  16. Análisis de la norma ISO/IEC 27001 : Diseño de implementación en la red de una empresa.

    OpenAIRE

    Sandoval Vargas, César Andrés

    2014-01-01

    Durante el proceso de esta investigación se aborda el tema relacionado con la seguridad informática, haciendo énfasis en el análisis de la norma ISO/IEC (International Organization for Standardization / International Electrotechnical Commission) 27001 y su puesta en práctica en una empresa o institución. El trabajo se encuentra dividido en tres capítulos. En el primero se efectúa un estudio de la seguridad informática.- Durante el segundo capítulo se lleva a cabo una caracterización general ...

  17. Ensayo metodológico para la formulación estadística de un modelo de riesgo de crédito para el IECE

    OpenAIRE

    Nieto Boada, Humberto Ricardo.

    2010-01-01

    149 p.: il.; + CD 1465. El IECE es una institución financiera pública que califica a sus clientes mediante políticas que no se ajustan a las modernas técnicas de riesgos de crédito. Por una parte existe una normativa del organismo de control para que se implementen en todas las instituciones del sistema financiero modelos de pérdidas esperadas basados en probabilidades de incumplimiento que a su vez están basados en sistemas de scoring generados mediante modelos estadísticos. Por otra part...

  18. Analisis Sistem Manajemen Keamanan Informasi Menggunakan ISO/IEC 27001 : 2013 Serta Rekomendasi Model Sistem Menggunakan Data Flow Diagram pada Direktorat Sistem Informasi Perguruan Tinggi

    Directory of Open Access Journals (Sweden)

    Yuni Cintia Yuze

    2016-11-01

    Full Text Available The importance of information and the possible risk of disruption, therefore the universities need to designed and implemented of the information security.  One of the standards that can be used to analyze the level of information security in the organization is ISO/IEC 27001 : 2013 and this standard has been prepared to provide requirements for establishing, implementing, maintaining and continually improving an information security management system. The objective of this research is to measure the level of information security based on standard ISO/IEC 27001: 2013 and modeling systems for information security management. This research uses descriptive qualitative approach, data collection and validation techniques with tringulasi (interview, observation and documentation. Data was analyzed using gap analysis and to measure the level of maturity this research uses SSE-CMM (Systems Security Engineering Capability Maturity Model. Based on the research results, Maturity level clause Information Security Policy reaches level 1 (Performed-Informally, clause Asset Management reaches level 3 (Well-Defined, clause Access Control reaches level 3 (Well-Defined, clause Physical and Environmental Security reaches level 3 (Well-Defined, clause Operational Security reaches level 3 (Well-Defined, Communication Security clause reaches the level 2 (Planned and Tracked. Based on the results of maturity level discovery of some weakness in asset management in implementing the policy. Therefore, the modeling system using the flow map and CD / DFD focused on Asset Management System.

  19. EVALUASI KEAMANAN INFORMASI PADA PTI PDAM TIRTA MOEDAL KOTA SEMARANG BERDASARKAN INDEKS KEAMANAN INFORMASI SNI ISO/IEC 27001:2009

    Directory of Open Access Journals (Sweden)

    Diah Restu Wardani

    2015-10-01

    Full Text Available Adanya rencana untuk meningkatkan keamanan informasi sesuai dengan Standar Nasional Indonesia (SNI. Selain rencana tersebut, ditemukan kurangnya kesadaran dari masing-masing staff PTI PDAM Tirta Moedal Kota Semarang terkait dengan keamanan informasi menyebabkan terjadinya berbagai masalah salah satunya penyalahgunaan wewenang yang dilakukan oleh staff PTI yaitu dengan mengubah sistem operasi yang telah ditetapkan oleh PTI PDAM dan kejadian tersebut berdampak pada proses bisnis. Ditemukan pula bahwa kurangnya pengamanan pada ruang server yang ada di divisi PTI. Tujuan dari penelitian ini adalah untuk mengevaluasi tingkat kelengkapan dan tingkat kematangan keamanan informasi pada divisi PTI serta memberikan rekomendasi perbaikan untuk meningkatkan tingkat kelengkapan dan tingkat kematangan keamanan informasi. Dari hasil studi dokumen, wawancara, dan kuesioner berdasarkan Indeks Keamanan Informasi SNI ISO/IEC 27001:2009 dihasilkan tingkat kelengkapan keamanan informasi sebesar 325 dan tingkat kematangan berada pada tingkat I+ dimana sudah ada pemahaman mengenai perlunya pengelolaan kemanan informasi akan tetapi penerapan langkah pengamanan masih belum teratur. Untuk mencapai tingkat kematangan V dan sesuai dengan Standar Nasional Indonesia (SNI PTI PDAM Tirta Moedal Kota Semarang dapat melakukan strategi perbaikan secara bertahap. Kata Kunci: Indeks Keamanan Informasi, SNI ISO/IEC 27001:2009, Evaluasi Keamanan Informasi, Tingkat Kelengkapan, Tingkat Kematangan

  20. Analysis of a provider of proficiency testing by interlaboratory comparisons for dosimetry in function of guides ISO/IEC 43 and ILAC G13

    International Nuclear Information System (INIS)

    Lohr, J.; Zaretzky, Alba; Stefanic, Amalia M.; Saravi, M.

    2009-01-01

    The Ionising Radiation Dosimetry Group (CNEA) has participated of the last intercomparison scheme organized by EUROMET. This intercomparison was held starting 2005 until 2008.The objective of this paper is to analyze this Association as a proficiency test provider according to the ISO/IEC Guide 43 (1997) 'Proficiency testing by interlaboratory comparisons' and ILAC G13 Guide (2007) 'Guidelines for the Requirements for the Competence of Providers of Proficiency Testing Schemes'. The analysis of EURAMET (so called since 2007) as the provider of this dosimetric comparison was made taking into account the following sections of the ILAC G13 Guide: Conduct of proficiency testing schemes; Statistical design, Communication with participants and Reports, taking them as essential parameters of the compliance of a proficiency test provider with the general requirements set by the Guides. This intercomparison had special characteristics coming from the participants and the primary objective of the scheme. It is remarkable the important degree of agreement of the organization with Guides ISO/IEC 43 and ILAC G13. (author)

  1. Critical issues for implementation of the standard NBR ISO/IEC 17025:2005 in Testing and Calibration Laboratory: case study at a public institution

    International Nuclear Information System (INIS)

    Castro, Denise Confar Carvalho de

    2013-01-01

    The public institution aims to promote excellence in public management to contribute to the quality of services provided to its customers and to increase competitiveness in the country, as well as its international projection. A technical barrier to trade that can lead to dissatisfaction and achieve the reputation of the institution is failing the test or calibration results and measurement data, thereby accreditation is regarded as the first essential step to facilitate the mutual acceptance of test results and calibration or measurement data. For recognition, laboratories need to demonstrate full compliance with both the sections of ISO/IEC 17025:2005, i.e. management and technical requirements. This research aims to discuss the critical aspects for implementation of ABNT NBR ISO / IEC 17025:2005 for calibration and testing of a Public Institution seeking accreditation of its laboratories with INMETRO, national accreditation body Laboratories. Besides getting preventive, corrective and improvement actions continues guidelines. Furthermore, the methodology used was to conduct a literature search and apply a questionnaire to identify the degree of agreement / disagreement of the foundations of the standard servers. Analysis of the results showed that the critical issues were: commitment, training, resources (infrastructure, human) and culture. (author)

  2. Characterization of the exradin A18 chamber ionization according to the IEC70631 standards. This work aims at the characterization of the Exradin model (Standard Imaging) A18 ionization chamber, according to the international standard IEC 607311. Intends to use the camera Exradin A18 for the quality control of a linear accelerator VARIAN model TrueBeam with capacity to produce beams of photons of high energy, unfiltered flatter (in later FFF) with high dose absorbed by pulse rate, why is verified, according to the mentioned standard IEC 60731, even under conditions of high dose absorbed by pulse rate, the efficiency of ion collection from this camera is within tolerances; Caracterizacion de la camara de ionizacion exradin A18 segun el estandar IEC70631. Estudio para haces de fotones sin filtro aplanador

    Energy Technology Data Exchange (ETDEWEB)

    Onses Segarra, A.; Puxeu Vaque, J.; Sancho Kolster, I.; Lizuain Arroyo, M. C.; Picon Olmos, C.

    2013-07-01

    This work aims at the characterization of the Exradin model (Standard Imaging) A18 ionization chamber, according to the international standard IEC 607311. Intends to use the camera Exradin A18 for the quality control of a linear accelerator VARIAN model TrueBeam with capacity to produce beams of photons of high energy, unfiltered flatter (in later FFF) with high dose absorbed by pulse rate, why is verified, according to the mentioned standard IEC 60731, even under conditions of high dose absorbed by pulse rate, the efficiency of ion collection from this camera is within tolerances. (Author)

  3. RxClass

    Data.gov (United States)

    U.S. Department of Health & Human Services — The RxClass Browser is a web application for exploring and navigating through the class hierarchies to find the RxNorm drug members associated with each class....

  4. FINANCIAL INDICATORS FOR THE IMPLEMENTATION OF AN EUROPEAN FUNDED INVESTMENT PROJECT UNDER SOP IEC PROGRAMME – CASE STUDY OF A ROMANIAN SME

    Directory of Open Access Journals (Sweden)

    Droj Laurentiu

    2010-07-01

    Full Text Available The European Integration came with new challenges for the Romanian enterprises especially for the SMEs, the opportunities arising from operating on the European Single Market and the possibility for accession of European Regional Development Funds. The main programme designed to offer access for small, medium and large Romanian enterprises to European funding is the Sectorial Operational Programme “Increase of Economic Competitiveness”- SOP IEC. This paper will analyze the area of intervention “D1.1. Productive and environment friendly investments and preparation for market competition in which Romanian SMEs” are competing to access European funding in order to develop their activities or to extend them into new ones. One of the main challenges for these SMEs is to generate, fulfil and to respect the financial indicators of the programme, which are part of the financial analysis of the project.

  5. Proposal and application of an approach based on AHP and ISO/IEC 25000 to support the evaluation of the quality of project management software systems

    Directory of Open Access Journals (Sweden)

    Matheus Henrique Bartolomeu Marques Morais

    2017-06-01

    Full Text Available In the current competitive scenario, organizations are seeking to improve factors that influence the administration and the success of their projects. The adoption of a project management software suitable to organizational requirements contributes to ensure satisfactory results. In this context, this study proposes a methodology to support the quality evaluation of project management software, which is based on the AHP method (Analytic Hierarchy Process as well as on the criteria and sub-criteria of ISO/IEC 25000. The AHP method is used to define the relevance of the criteria and sub-criteria chosen. The proposed methodology was applied to an illustrative case to select the most appropriate software. The alternatives Basecamp, MS Project, Service Desk and Primavera were evaluated. Primavera and MS Project achieved the higher global performance in the process evaluation, since they fulfill 29 of 30 requirements. However, due to some particularities of the evaluated products, Primavera was selected as being the most suitable.

  6. Determinig Logistics Center’s ISO/IEC 9126 Software Product Quality Criteria Based On Analytic Hierarcy Process

    OpenAIRE

    KABAK, Mehmet; KAZANÇOĞLU, Yiğit; KURTEL, Kaan

    2009-01-01

    ISO/IEC 9126 yazılım kalite modeli iki önemli özelliğini işaret eder. Birincisi; kullanıcı, geliştiren ve yöneticinin ürün kalitesine ait görüşü; ikincisi kullanım kılavuzlarında yer alan kalite karakteristikleri ile ilgilidir. Bu iki özellik, bizi lojistik merkezi yazılım kalite karakteristiklerinin daha iyi anlaşılması konusunda çalışmak için cesaret veren unsurlardı. Biz bu çalışmada, lojistik merkezi yazılım kalite gereksinimlerini karşılamada yeterince güçlü olan yazılım ürün kalite kara...

  7. Generation of a plan for the implementation of INTE/ISO IEC 17025 in a paint industry and modification of a quality manual

    International Nuclear Information System (INIS)

    Salazar Gomez, Andrea Marcela

    2014-01-01

    A diagnosis to the integrated management system and quality control laboratories is done in a paint industry. The administrative aspects related with the documentation are evaluated: procedures, instructions, records, processes of sampling, testing, for possible accreditation of some methods of analysis under the norm ISO/IEC 17025 representing an opportunity for growth and improvement in labs. The laboratories of the paint industry have analyzed a number of materials such as products for the various stages of construction and beautification of homes, buildings and other, as well as evaluation of the requirements established by international standards to demonstrate competence regarding these. The feasibility of implementing the standard is visualized, solving the disagreements that have been found during the evaluation period. The impact of the perception of quality is determined by the direction, the need for investment in resources, training and equipment. (author) [es

  8. Tamarix gallica phenolics protect IEC-6 cells against H2O2 induced stress by restricting oxidative injuries and MAPKs signaling pathways.

    Science.gov (United States)

    Bettaib, Jamila; Talarmin, Hélène; Droguet, Mickaël; Magné, Christian; Boulaaba, Mondher; Giroux-Metges, Marie-Agnès; Ksouri, Riadh

    2017-05-01

    Polyphenolic compounds gained interest in the pharmaceutical research area due to their beneficial properties. Herein, antioxidant and cytoprotective capacities of T. gallica extract on H 2 O 2 -challenged rat small intestine epithelial cells were investigated. To set stress conditions, IEC-6 cultures were challenged with numerous H 2 O 2 doses and durations. Then, 40μM H 2 O 2 during 4h were selected to assess the cytoprotective effect of different T. gallica extract concentrations. Oxidative parameters, measured through CAT and SOD activities as well as MDA quantification were assessed. In addition, the expression of possibly involved MAPKs was also valued. Main results reported that T. gallica was rich in polyphenols and exhibited an important antioxidant activity (DPPH Assay, IC 50 =6μgmL -1 ; ABTS + test, IC 50 =50μgmL -1 ; Fe-reducing power, EC 50 =100μgmL -1 ). The exposure of IEC-6 cultures to 40μM H 2 O 2 during 4h caused oxidative stress manifested by (i) over 70% cell mortality, (ii) over-activity of CAT (246%), (iii) excess in MDA content (18.4nmolmg -1 ) and (iiii) a trigger of JNK phosphorylation. Pretreatment with T. gallica extract, especially when used at 0.25μgmL -1 , restored cell viability to 122%, and normal cell morphology in H 2 O 2 -chalenged cells. In addition, this extract normalized CAT activity and MDA content (100% and 14.7nmolmg -1 , respectively) to their basal levels as compared to control cells. Furthermore, stopping cell death seems to be due to dephosphorylated JNK MAPK exerted by T. gallica bioactive compounds. In all, T. gallica components provided a cross-talk between regulatory pathways leading to an efficient cytoprotection against harmful oxidative stimulus. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  9. Evaluation of the BPW34 photodiode response in quality of RQR radiation of the regulation IEC 61267 implanted at the IPEN and CRCN-NE, Brazil; Avaliacao da resposta do fotodiodo BPW34 em qualidades de radiacao RQR da norma IEC 61267 implantadas no IPEN e no CRCN-NE

    Energy Technology Data Exchange (ETDEWEB)

    Magalhaes, Cinthia M.S. de; Santos, Luiz A.P. dos; Santos, Marcus A.P. dos, E-mail: lasantos@cnen.gov.b, E-mail: masantos@cnen.gov.b [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Caldas, Linda V.E., E-mail: lcaldas@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Souza, Divanizia do N., E-mail: divanizi@ufs.b [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil). Dept. de Fisica

    2011-10-26

    This paper evaluated the answer of two commercial BPW34 photodiodes in four RQR radiation qualities implanted, in accordance with the regulation IEC 61267, at the laboratory of the instrument calibrations of the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN) and radiation metrology laboratory of Northeastern Centro Regional de Ciencias Nucleares (CRCN-NE/CNEN). The results have shown that is possible to relate the qualities implanted at those laboratories and that the BPW34 photodiode can be useful for comparative evaluations of distinct qualities of radiodiagnostic beams

  10. Handbook of quality management according to the regulation DIN EN ISO/IEC 17025 for the national EU reference laboratory or air quality at the Federal Office for Environmental Protection. State of the art: September 2009; Qualitaetsmanagement-Handbuch nach DIN EN ISO/IEC 17025 fuer das Nationale EU-Referenzlabor fuer Luftqualitaet im Umweltbundesamt. Stand September 2009

    Energy Technology Data Exchange (ETDEWEB)

    Medem, Anneliese (comp.)

    2010-01-15

    The past quality management manual of the national EU reference laboratory for air quality completely was revised. The new quality management manual under consideration contains a determination of the following aspects: Organisation of construction processing, fundamental regulations of the management system concerning to quality, statements to the quality politics, paramount goals. The presented quality management system is regarded to all elements of the regulation DIN EN ISO/IEC 17025:2005 with consideration of the special requirements of the national European Union reference laboratory for air quality in the Federal Office for Environment Protection (Dessau-Rosslau, Federal Republic of Germany).

  11. International Electronical Committee (IEC 61850 Mapping with Constrained Application Protocol (CoAP in Smart Grids Based European Telecommunications Standard Institute Machine-to-Machine (M2M Environment

    Directory of Open Access Journals (Sweden)

    In-Jae Shin

    2017-03-01

    Full Text Available As power systems develop rapidly into smarter and more flexible configurations, so too must the communication technologies that support them. Machine-to-machine (M2M communication in power systems enables information collection by combining sensors and communication protocols. In doing so, M2M technology supports communication between machines to improve power quality and protection coordination. When functioning in a “smart grid” environment, M2M has been labelled by the European Telecommunications Standard Institute (ETSI. International Electronical Committee (IEC 61850 as the most important standard in power network systems. As evidence, this communication platform has been used for device data collection/control in substation automation systems and distribution automation systems. If the IEC 61850 information model were to be combined with a set of contemporary web protocols, the potential benefits would be enormous. Therefore, a constrained application protocol (CoAP has been adopted to create an ETSI M2M communication architecture. CoAP is compared with other protocols (MQTT, SOAP to demonstrate the validity of using it. This M2M communication technology is applied in an IEC61850, and use the OPNET Modeler 17.1 to demonstrate intercompatibility of CoAP Gateway. The proposed IEC 61850 and CoAP mapping scheme reduces the mapping time and improves throughput. CoAP is useful in the ETSI M2M environment where device capability is able to be limited.

  12. PRCR Classes and Activities

    Data.gov (United States)

    Town of Cary, North Carolina — This data is specific to Parks and Recreation classes, workshops, and activities within the course catalog. It contains an entry for upcoming classes.*This data set...

  13. Class 1 Areas

    Data.gov (United States)

    U.S. Environmental Protection Agency — A "Class 1" area is a geographic area recognized by the EPA as being of the highest environmental quality and requiring maximum protection. Class I areas are areas...

  14. Spectrum of Class Operators

    Directory of Open Access Journals (Sweden)

    Yuan Jiangtao

    2007-01-01

    Full Text Available This paper discusses some spectral properties of class operators for , , , and . It is shown that if is a class operator, then the Riesz idempotent of with respect to each nonzero isolated point spectrum is selfadjoint and . Afterwards, we prove that every class operator has SVEP and property , and Weyl's theorem holds for when .

  15. A Virtual Class Calculus

    DEFF Research Database (Denmark)

    Ernst, Erik; Ostermann, Klaus; Cook, William Randall

    2006-01-01

    model for virtual classes has been a long-standing open question. This paper presents a virtual class calculus, vc, that captures the essence of virtual classes in these full-fledged programming languages. The key contributions of the paper are a formalization of the dynamic and static semantics of vc...

  16. Adopting ISO 9712:2005 and ISO/IEC 17024:2003 as Philippine national standard for NDT for global competitiveness

    International Nuclear Information System (INIS)

    Banaga, Renato T.; Mateo, Alejandro J.

    2005-01-01

    This paper describes and promotes the adoption of ISO 9712: 2005 edition and the ISO/IEC 17024: 2003 edition by the Philippines to be globally competitive. ISO 9712 is a standard for qualifications and certification of nondestructive testing (NDT) personnel while ISO/IEC 17024 is conformity assessment-general requirements for bodies operating certification of persons. ISO 9712 defies that the effectiveness of an application of nondestructive testing depends on the capabilities and qualifications of personnel performing the NDT test. The Philippines through the national certifying body (NCB) implements the certification of proficiency of NDT personnel in accordance with the Philippine National Standards (PNS-146: 1998) This standard (formerly PNS-146: 1987) was originally based from the draft ISO/TC-135/SC7N35.3 and was later revised to conform to the latest ISO FDIS 9712: 1997 and rename PNS-146: 1998. Now with the issuance of the latest ISO 9712:2005 edition and to keep abreast with the current trends of NDT technology, present time and conditions dictates for us to revise our NDT personnel certification to the latest edition of ISO 9712. The International Atomic Energy Agency (IAEA) supports the establishment of a common NDT standard. The IAEA is promoting af financially supporting the establishment in developing countries of only one NDT standard. The IAEA through the Regional Cooperative Agreement (RCA) has initiated the harmonization of the NDT qualification and certification of personnel in the RCA member states. In October 2001, the IAEA sponsored the Dhaka meeting where the International Committee for Nondestructive Testing (ICNDT), Asia-Pacific Committee (APCNDT) and RCA member states representatives drafted a Mutual Recognition Agreement (MRA) for the Asia-Pacific NDT (APCNDT) personnel certification schemes acording to ISO 9712. Last August 2005, IAEA/RCA sponsored the Colombo meeting for the harmonization of regional NDT applying ISO 9712 and ISO/IEC

  17. Loosely coupled class families

    DEFF Research Database (Denmark)

    Ernst, Erik

    2001-01-01

    are expressed using virtual classes seem to be very tightly coupled internally. While clients have achieved the freedom to dynamically use one or the other family, it seems that any given family contains a xed set of classes and we will need to create an entire family of its own just in order to replace one...... of the members with another class. This paper shows how to express class families in such a manner that the classes in these families can be used in many dierent combinations, still enabling family polymorphism and ensuring type safety....

  18. Class, Culture and Politics

    DEFF Research Database (Denmark)

    Harrits, Gitte Sommer

    2013-01-01

    Even though contemporary discussions of class have moved forward towards recognizing a multidimensional concept of class, empirical analyses tend to focus on cultural practices in a rather narrow sense, that is, as practices of cultural consumption or practices of education. As a result......, discussions within political sociology have not yet utilized the merits of a multidimensional conception of class. In light of this, the article suggests a comprehensive Bourdieusian framework for class analysis, integrating culture as both a structural phenomenon co-constitutive of class and as symbolic...

  19. James Webb Space Telescope (JWST) Integrated Science Instruments Module (ISIM) Electronics Compartment (IEC) Conformal Shields Composite Bond Structure Qualification Test Method

    Science.gov (United States)

    Yew, Calinda; Stephens, Matt

    2015-01-01

    The JWST IEC conformal shields are mounted onto a composite frame structure that must undergo qualification testing to satisfy mission assurance requirements. The composite frame segments are bonded together at the joints using epoxy, EA 9394. The development of a test method to verify the integrity of the bonded structure at its operating environment introduces challenges in terms of requirements definition and the attainment of success criteria. Even though protoflight thermal requirements were not achieved, the first attempt in exposing the structure to cryogenic operating conditions in a thermal vacuum environment resulted in approximately 1 bonded joints failure during mechanical pull tests performed at 1.25 times the flight loads. Failure analysis concluded that the failure mode was due to adhesive cracks that formed and propagated along stress concentrated fillets as a result of poor bond squeeze-out control during fabrication. Bond repairs were made and the structures successfully re-tested with an improved LN2 immersion test method to achieve protoflight thermal requirements.

  20. Atvērtā pirmkoda programmatūras pielietojuma iespējas ISO/IEC 27000 standartu sērijas prasību apmierināšanai

    OpenAIRE

    Vasiļjevs, Oļegs

    2014-01-01

    Bakalaura darba ietvaros tiek apskatīta un izanalizēta informācijas drošības pārvaldes sistēmas apakškategorija - ISO/IEC 27000 standartu sērijā. Ievērojot sertifikāta iegūšanas projekta apjomu un standartu kopas īpatnējo “zarošanas” struktūru, ir viegli definējams galvenais darba uzdevums – saprast kas tieši ir vajadzīgs no sistēmas administratora, lai īstenotu savu darba daļu pietiekami ātri. Galvenais darba mērķis ir sniegt vienkāršoto ISO/IEC 27000 standartu sērijas prasības izklāstu sis...

  1. Diseño e implementación de un algoritmo para translación de protocolo entre las normas IEC60870-5-104 y MODBUS TCP/IP

    OpenAIRE

    Feria Briceño, John Henry; Universidad Distrital Francisco José de Caldas

    2015-01-01

    Este artículo muestra los resultados del proceso de diseño, implementación y prueba de un algoritmo para hacer la translación de protocolo entre las normas IEC 60870-5-104 y MODBUS TCP/IP, éste modelo de algoritmos son de amplio uso en los procesos de supervisión y automatización en sub-estaciones eléctricas.

  2. Class network routing

    Science.gov (United States)

    Bhanot, Gyan [Princeton, NJ; Blumrich, Matthias A [Ridgefield, CT; Chen, Dong [Croton On Hudson, NY; Coteus, Paul W [Yorktown Heights, NY; Gara, Alan G [Mount Kisco, NY; Giampapa, Mark E [Irvington, NY; Heidelberger, Philip [Cortlandt Manor, NY; Steinmacher-Burow, Burkhard D [Mount Kisco, NY; Takken, Todd E [Mount Kisco, NY; Vranas, Pavlos M [Bedford Hills, NY

    2009-09-08

    Class network routing is implemented in a network such as a computer network comprising a plurality of parallel compute processors at nodes thereof. Class network routing allows a compute processor to broadcast a message to a range (one or more) of other compute processors in the computer network, such as processors in a column or a row. Normally this type of operation requires a separate message to be sent to each processor. With class network routing pursuant to the invention, a single message is sufficient, which generally reduces the total number of messages in the network as well as the latency to do a broadcast. Class network routing is also applied to dense matrix inversion algorithms on distributed memory parallel supercomputers with hardware class function (multicast) capability. This is achieved by exploiting the fact that the communication patterns of dense matrix inversion can be served by hardware class functions, which results in faster execution times.

  3. Culture and social class.

    Science.gov (United States)

    Miyamoto, Yuri

    2017-12-01

    A large body of research in Western cultures has demonstrated the psychological and health effects of social class. This review outlines a cultural psychological approach to social stratification by comparing psychological and health manifestations of social class across Western and East Asian cultures. These comparisons suggest that cultural meaning systems shape how people make meaning and respond to material/structural conditions associated with social class, thereby leading to culturally divergent manifestations of social class. Specifically, unlike their counterparts in Western cultures, individuals of high social class in East Asian cultures tend to show high conformity and other-orientated psychological attributes. In addition, cultures differ in how social class impacts health (i.e. on which bases, through which pathways, and to what extent). Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Semantic Analysis of Virtual Classes and Nested Classes

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1999-01-01

    Virtual classes and nested classes are distinguishing features of BETA. Nested classes originated from Simula, but until recently they have not been part of main stream object- oriented languages. C++ has a restricted form of nested classes and they were included in Java 1.1. Virtual classes...... classes and parameterized classes have been made. Although virtual classes and nested classes have been used in BETA for more than a decade, their implementation has not been published. The purpose of this paper is to contribute to the understanding of virtual classes and nested classes by presenting...

  5. First multivendor scheme in CFE to protection of 400 kV transmission line, using optical TC's, digital relays and bus IEC 61850-9-2; Primer esquema multivendedor en CFE para proteccion de linea de transmision de 400 kV, utilizando TC's opticos, relevadores digitales y bus IEC 61850-9-2

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Colon, V.R; Rasgado, J.P [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Lara C, H; Melendez, C; Juarez, N [Subdireccion de Transmision, Comision Federal de Electricidad (Mexico)

    2013-03-15

    This paper presents the details of design, installation and putting into service in the Comision Federal de Electricidad (CFE), of the first multi-vendor scheme that exists in the world, for the protection of a 400kV transmission line, which uses optical current transformers and digital relays IEC 61850-9-2. This system arises as a pilot project of the Subdireccion de Transmision of the CFE with the Instituto de Investigaciones Electricas (IIE). To ensure success in the implementation of the protection scheme, CFE joined a team coordinated by the Instituto de Investigaciones Electricas (IIE)involving nine international companies and a university. Pilot protection scheme is in operation under continuous monitoring, in one of the transmission lines of CFE that interconnect Manuel Moreno Torres with El Juile substations. The construction features, the challenges that were overcome and the first results obtained in operation are presented below. [Spanish] Este articulo presenta los detalles del diseno, instalacion y puesta en servicio en la Comision Federal de Electricidad (CFE) del primer esquema multivendedor que existe en el mundo, para la proteccion de una linea de transmision de 400kV, que utiliza transformadores de corriente opticos y relevadores digitales IEC 61850-9-2. Este sistema surge como un proyecto piloto de la Subdireccion de Transmision de la CFE con el Instituto de Investigaciones Electricas (IIE). Para asegurar el exito en la implementacion del esquema de proteccion, la CFE integro un equipo de trabajo coordinado por el Instituto de Investigaciones Electricas (IIE) en el que participaron 9 empresas internacionales y una universidad. El esquema de proteccion piloto, se encuentra en operacion bajo monitoreo continuo, en una de las lineas de transmision de la CFE que interconecta las subestaciones de Manuel Moreno Torres y El Juile. Las caracteristicas de construccion, los retos que fueron vencidos y los primeros resultados obtenidos en su operacion se

  6. Spirulina platensis Improves Mitochondrial Function Impaired by Elevated Oxidative Stress in Adipose-Derived Mesenchymal Stromal Cells (ASCs) and Intestinal Epithelial Cells (IECs), and Enhances Insulin Sensitivity in Equine Metabolic Syndrome (EMS) Horses.

    Science.gov (United States)

    Nawrocka, Daria; Kornicka, Katarzyna; Śmieszek, Agnieszka; Marycz, Krzysztof

    2017-08-03

    Equine Metabolic Syndrome (EMS) is a steadily growing life-threatening endocrine disorder linked to insulin resistance, oxidative stress, and systemic inflammation. Inflammatory microenvironment of adipose tissue constitutes the direct tissue milieu for various cell populations, including adipose-derived mesenchymal stromal cells (ASCs), widely considered as a potential therapeutic cell source in the course of the treatment of metabolic disorders. Moreover, elevated oxidative stress induces inflammation in intestinal epithelial cells (IECs)-the first-line cells exposed to dietary compounds. In the conducted research, we showed that in vitro application of Spirulina platensis contributes to the restoration of ASCs' and IECs' morphology and function through the reduction of cellular oxidative stress and inflammation. Enhanced viability, suppressed senescence, and improved proliferation of ASCs and IECs isolated from metabolic syndrome-affected individuals were evident following exposition to Spirulina. A protective effect of the investigated extract against mitochondrial dysfunction and degeneration was also observed. Moreover, our data demonstrate that Spirulina extract effectively suppressed LPS-induced inflammatory responses in macrophages. In vivo studies showed that horses fed with a diet based on Spirulina platensis supplementation lost weight and their insulin sensitivity improved. Thus, our results indicate the engagement of Spirulina platensis nourishing as an interesting alternative approach for supporting the conventional treatment of equine metabolic syndrome.

  7. Establishment of qualities mammography according to the standard IEC-61267 in the laboratory of metrology of ionizing radiation of the National Center of Dosimetry and enlargement of the accreditation by ENAC; Establecimiento de las calidades de mamografia segun la norma IEC-61267 en el laboratorio de metrologia de radiaciones ionizantes del centro nacional de dosimetria (CND) y proceso de ampliacion de su acreditacion por ENAC

    Energy Technology Data Exchange (ETDEWEB)

    Roig Petit, F.; Mestre de Juan, V.; Alabau Albors, J.; Palma Copete, J.; Ruiz Rodriguez, J. C.; Pons Mocholi, S.

    2013-07-01

    The extension of the accreditation of the laboratory of the National Center Dosimetry (No. 58/LC10.036) by the national accreditation entity (ENAC), according to the ISO 17025 standard [2], for the standard qualities of mammography by the IEC 61267 comes to meet part of the needs that demand our health care environment in terms of radiation measuring instruments calibration. This work intends to publicize this enlargement commenting on the different phases of the process to get the accreditation. (Author)

  8. The Question of Class

    Science.gov (United States)

    Gorski, Paul C.

    2007-01-01

    For too long, educators' approach to understanding the relationships between poverty, class and education has been framed by studying the behaviors and cultures of poor students and their families. If only people--in the middle and upper-middle classes--can understand "their" culture, why "those people" do not value education, why "those parents"…

  9. The Conversation Class

    Science.gov (United States)

    Jackson, Acy L.

    2012-01-01

    The conversation class occupies a unique place in the process of learning English as a second or foreign language. From the author's own experience in conducting special conversation classes with Persian-speaking adults, he has drawn up a number of simple but important guidelines, some of which he hopes may provide helpful suggestions for the…

  10. Teaching Social Class

    Science.gov (United States)

    Tablante, Courtney B.; Fiske, Susan T.

    2015-01-01

    Discussing socioeconomic status in college classes can be challenging. Both teachers and students feel uncomfortable, yet social class matters more than ever. This is especially true, given increased income inequality in the United States and indications that higher education does not reduce this inequality as much as many people hope. Resources…

  11. Cutting Class Harms Grades

    Science.gov (United States)

    Taylor, Lewis A., III

    2012-01-01

    An accessible business school population of undergraduate students was investigated in three independent, but related studies to determine effects on grades due to cutting class and failing to take advantage of optional reviews and study quizzes. It was hypothesized that cutting classes harms exam scores, attending preexam reviews helps exam…

  12. Analysis and design of the installation of a lightning rod in risk areas of atmospheric discharge according to the standards NFPA 70, NFPA 780 and IEC 62305

    International Nuclear Information System (INIS)

    Cordoba Alfaro, Marco

    2012-01-01

    The design, analysis of the installation and handling of electrical protections oriented to atmospheric discharge in specific locations of the north zone of Costa Rica, are focused. Related topics with the devices of protection against atmospheric discharge, definitions, types, uses and characteristics were developed. The regulations NFPA 70, NFPA 780 and IEC 62305 are studied for the analysis and design of the lightning rod. The standards are analyzed, according to the rules applied at specialized companies in the elaboration and installation of lightning rod, in order to determine if these are adequate and used in correctly shape . A report is made about the design of a lightning rod and preventive measures for areas with regular activity of atmospheric discharges. The different devices for the elaboration and installation of a lightning rod are investigated in order to later use and exploitation. The design for the implementation of a system of conventional lightning rod, type tips of Franklin, was realized at the Iglesia Catedral of Ciudad Quesada. The materials that were used in this type of lightning rod, have followed the regulation NFPA 780. Several approximate plans of the cathedral have been performed to appreciate good the design, both in 2D as in 3D; these allow a better panorama of the installation. The distance between devices has been fundamental to take into account in the design of a system of lightning rod, as it marks an important difference between the area to protect and areas that may be exposed to an atmospheric discharge. The rule NFPA 780 has been established that to design the location of the lightning captors can use the rolling sphere method, also has marked the requirements of the downspouts systems and grounding systems. Before locating a lightning protection system it is important to be informed of the principal characteristics of the area to be protected; as on several occasions, the particularities of the selected area have

  13. 47 CFR 73.25 - Clear channels; Class A, Class B and Class D stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Clear channels; Class A, Class B and Class D... RADIO SERVICES RADIO BROADCAST SERVICES AM Broadcast Stations § 73.25 Clear channels; Class A, Class B and Class D stations. The frequencies in the following tabulations are designated as clear channels...

  14. Risikomanagement für medizinische Netzwerke in der Intensiv- und Notfallmedizin. Gemeinsames Positionspapier zur Norm IEC 80001-1 [Risk management for medical networks in intensive care and emergency medicine – a joint position paper on IEC 80001-1

    Directory of Open Access Journals (Sweden)

    Imhoff, Michael

    2013-02-01

    Full Text Available [english] IEC 80001-1 is an international standard and offers recommendations for a risk management process for medical information technology networks (MITs. MITs are defined as IT networks incorporating at least one medical device. The goal is to build and maintain reliable and secure MITs for hospitals of all kids. To achieve it, the standard suggests applying risk management and defines the roles involved as well as their responsibilities. A central role is the medical IT-network risk manager, assigned by the top management of organizations. He communicates with and mediates between clinical, medical device and IT divisions and compiles risk relevant facts usually distributed among them. All identified risks are analyzed, evaluated and documented in the risk management file along with counter measures and a final assessment of acceptability.We acknowledge that implementing the suggested process will create an overhead cost in documentation and – partly by extension – in personnel. However we believe that the investment at the start of projects is worthwhile, because it helps to prevent or solve problems in later stages. Especially consecutive projects can profit from the investment, reducing required effort and costs. Furthermore, a reliable and secure MIT forms the basis for frictionless routine operations and innovations for connected medical devices. Hence the investment is justified. Applying risk management to the whole cooperation all at once is unrealistic. Focusing on parts of the network, which are crucial to a new project is more recommendable. With a smaller scope, risk management remains feasible and can later be expanded to other parts of the network.IEC 80001-1 demands communication among involved employees from different specialties and divisions. This offers a chance for cooperation to find better decisions and solutions regarding an organization’s medical IT network.[german] Die IEC 80001-1 ist eine Norm, die

  15. Social Class Dialogues and the Fostering of Class Consciousness

    Science.gov (United States)

    Madden, Meredith

    2015-01-01

    How do critical pedagogies promote undergraduate students' awareness of social class, social class identity, and social class inequalities in education? How do undergraduate students experience class consciousness-raising in the intergroup dialogue classroom? This qualitative study explores undergraduate students' class consciousness-raising in an…

  16. Venture Class Launch Services

    Science.gov (United States)

    Wiese, Mark

    2016-01-01

    Provide an introduction to the Launch Services Program, and specifically the strategic initiative that drove the Venture Class Launch Services contracts. Provide information from the VCLS request for proposals, as well as the Agency's CubeSat Launch Initiative.

  17. Nordic Walking Classes

    CERN Multimedia

    Fitness Club

    2015-01-01

    Four classes of one hour each are held on Tuesdays. RDV barracks parking at Entrance A, 10 minutes before class time. Spring Course 2015: 05.05/12.05/19.05/26.05 Prices 40 CHF per session + 10 CHF club membership 5 CHF/hour pole rental Check out our schedule and enroll at: https://espace.cern.ch/club-fitness/Lists/Nordic%20Walking/NewForm.aspx? Hope to see you among us! fitness.club@cern.ch

  18. Generalized Fourier transforms classes

    DEFF Research Database (Denmark)

    Berntsen, Svend; Møller, Steen

    2002-01-01

    The Fourier class of integral transforms with kernels $B(\\omega r)$ has by definition inverse transforms with kernel $B(-\\omega r)$. The space of such transforms is explicitly constructed. A slightly more general class of generalized Fourier transforms are introduced. From the general theory foll...... follows that integral transform with kernels which are products of a Bessel and a Hankel function or which is of a certain general hypergeometric type have inverse transforms of the same structure....

  19. Power through education. IEC materials.

    Science.gov (United States)

    1995-09-01

    This news brief is about a video on adolescent reproductive health in developing countries, which was produced in preparation for the Beijing Fourth World Conference on Women. The video documents the adolescent experiences of a rural girl in Bangladesh, an urban girl in Mexico City, and a poor girl from rural Thailand. The photos and story explain the actual lives of these adolescent women and give voice to their thoughts about their lives. Moni, who is 13, lives in a remote rural village in Bangladesh. She began menstruating 6 months after her marriage. Her role is to do the housework for her husband's family of 12 people. There is no choice. Luz, who is 15 years of age and lives in Mexico City, experienced a nonmarital pregnancy and cessation of education. The unplanned pregnancy occurred due to lack of knowledge. The 19-year-old Nagor lived in a small Thai village until she became involved in prostitution through her sister and other village girls. The attraction was income to help her family. Lack of knowledge and being the youngest of 9 children contributed to her situation. The video uses these cases to illustrate the importance of empowerment of women through equal educational opportunity, access to reproductive health information and services, and economic independence. The cases illustrate dramatically how the lack of information can impact strongly on women's lives. The video is available with English narration. JOICFP has a variety of audio-visual materials on reproductive health education, family planning, and empowerment of women.

  20. Safety class methodology

    International Nuclear Information System (INIS)

    Donner, E.B.; Low, J.M.; Lux, C.R.

    1992-01-01

    DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

  1. How ISO/IEC 17799 can be used for base lining information assurance among entities using data mining for defense, homeland security, commercial, and other civilian/commercial domains

    Science.gov (United States)

    Perry, William G.

    2006-04-01

    One goal of database mining is to draw unique and valid perspectives from multiple data sources. Insights that are fashioned from closely-held data stores are likely to possess a high degree of reliability. The degree of information assurance comes into question, however, when external databases are accessed, combined and analyzed to form new perspectives. ISO/IEC 17799, Information technology-Security techniques-Code of practice for information security management, can be used to establish a higher level of information assurance among disparate entities using data mining in the defense, homeland security, commercial and other civilian/commercial domains. Organizations that meet ISO/IEC information security standards have identified and assessed risks, threats and vulnerabilities and have taken significant proactive steps to meet their unique security requirements. The ISO standards address twelve domains: risk assessment and treatment, security policy, organization of information security, asset management, human resources security, physical and environmental security, communications and operations management, access control, information systems acquisition, development and maintenance, information security incident management and business continuity management and compliance. Analysts can be relatively confident that if organizations are ISO 17799 compliant, a high degree of information assurance is likely to be a characteristic of the data sets being used. The reverse may be true. Extracting, fusing and drawing conclusions based upon databases with a low degree of information assurance may be wrought with all of the hazards that come from knowingly using bad data to make decisions. Using ISO/IEC 17799 as a baseline for information assurance can help mitigate these risks.

  2. Proposta de critério para avaliação de softwares de questionários eletrônicos, com base nas normas ABNT NBR ISO/IEC 9126 e 14598

    OpenAIRE

    Alquimim, Hebert Bratefixe

    2013-01-01

    Com o advento e a popularização da Internet, diversos Softwares que permitem a criação de questionários eletrônicos como foco na avaliação de ensino aparecem como uma alternativa para o docente, mesmo que a disciplina lecionada seja presencial, permitindo assim uma forma diferenciada de avaliação. Este trabalho tem por objetivo descrever uma proposta de critério para avaliação de questionários eletrônicos na Web, utilizando como base a norma ABNT NBR ISO/IEC 9126, que especifica as qualidades...

  3. Translation in ESL Classes

    Directory of Open Access Journals (Sweden)

    Nagy Imola Katalin

    2015-12-01

    Full Text Available The problem of translation in foreign language classes cannot be dealt with unless we attempt to make an overview of what translation meant for language teaching in different periods of language pedagogy. From the translation-oriented grammar-translation method through the complete ban on translation and mother tongue during the times of the audio-lingual approaches, we have come today to reconsider the role and status of translation in ESL classes. This article attempts to advocate for translation as a useful ESL class activity, which can completely fulfil the requirements of communicativeness. We also attempt to identify some activities and games, which rely on translation in some books published in the 1990s and the 2000s.

  4. Talking Class in Tehroon

    DEFF Research Database (Denmark)

    Elling, Rasmus Christian; Rezakhani, Khodadad

    2016-01-01

    Persian, like any other language, is laced with references to class, both blatant and subtle. With idioms and metaphors, Iranians can identify and situate others, and thus themselves, within hierarchies of social status and privilege, both real and imagined. Some class-related terms can be traced...... back to medieval times, whereas others are of modern vintage, the linguistic legacy of television shows, pop songs, social media memes or street vernacular. Every day, it seems, an infectious set of phrases appears that make yesterday’s seem embarrassingly antiquated....

  5. MIDDLE CLASS MOVEMENTS

    OpenAIRE

    Dr. K. Sravana Kumar

    2016-01-01

    The middle class is placed between labour and capital. It neither directly awns the means of production that pumps out the surplus generated by wage labour power, nor does it, by its own labour, produce the surplus which has use and exchange value. Broadly speaking, this class consists of the petty bourgeoisie and the white-collar workers. The former are either self-employed or involved in the distribution of commodities and the latter are non-manual office workers, supervisors and profession...

  6. Class Actions in Denmark

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2009-01-01

    The article deals with the relatively new Danish Act on Class Action (Danish: gruppesøgsmål) which was suggested by The Permanent Council on Civil procedure (Retsplejerådet) of which the article's author is a member. The operability of the new provisions is illustrated through some wellknown Danish...... cases: Hafnia case (investment prospectus), and Danish Eternit (roof elements) where the existence of Danish provisions on class actions might have made a difference, and the article also deals with the delicate questions of opt-in and opt-out....

  7. The Class Number Problem

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 7. The Class Number Problem - An Introduction to Algebraic Number Theory. Rajat Tandon. General ... Author Affiliations. Rajat Tandon1. Department of Mathematics, University of Hyderabad, Central University P.O., Hyderabad 500 046, India ...

  8. The Class Number Problem

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 6. The Class Number Problem - Binary Quadratic Forms. Rajat Tandon. General Article Volume 3 Issue ... Author Affiliations. Rajat Tandon1. Department of Mathematics, University of Hyderabad, Central University P.O. Hyderabad 500 046. India ...

  9. The Class Number Problem

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 7. The Class Number Problem - An Introduction to Algebraic Number Theory. Rajat Tandon. General Article Volume 3 Issue 7 July 1998 pp 28-37. Fulltext. Click here to view fulltext PDF. Permanent link:

  10. The Class Number Problem

    Indian Academy of Sciences (India)

    The Class Number Problem. 2. An Introduction to Algebraic Number Theory. Rajat Tandon received his PhD from Yale. University, USA. After an initial period as a visiting post-doctoral fellow at. TIFR, he joined the faculty of the North. Eastern Hill University, where he taught for a few years. For about two decades now, he ...

  11. Reference class forecasting

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    Underbudgettering og budgetoverskridelser forekommer i et flertal af større bygge- og anlægsprojekter. Problemet skyldes optimisme og/eller strategisk misinformation i budgetteringsprocessen. Reference class forecasting (RCF) er en prognosemetode, som er udviklet for at reducere eller eliminere...

  12. Working Together in Class

    Directory of Open Access Journals (Sweden)

    Pateşan Marioara

    2017-12-01

    Full Text Available The scores obtained by the military students are very important as a lot of opportunities depend on them: the choice of the branch, selection for different in and off-campus activities, the appointment to the workplace and so on. A qualifier, regardless of its form of effective expression, can make a difference in a given context of issuing a value judgment, in relation to the student's performance assessment. In our research we tried to find out what motives students, what determines them to get actively involved in the tasks they are given and the ways we can improve their participation in classes and assignments. In order to have an educated generation we need to have not only well prepared teachers but ones that are open-minded, flexible and in pace with the methodological novelties that can improve the teaching learning process in class. Along the years we have noticed that in classes where students constituted a cohesive group with an increasing degree of interaction between members, the results were better than in a group that did not appreciate team-work. In this article we want to highlight the fact that a teacher can bring to class the appropriate methods and procedures can contribute decisively to the strengthening of the group cohesion and high scores.

  13. EPA Web Training Classes

    Science.gov (United States)

    Scheduled webinars can help you better manage EPA web content. Class topics include Drupal basics, creating different types of pages in the WebCMS such as document pages and forms, using Google Analytics, and best practices for metadata and accessibility.

  14. Class in disguise

    DEFF Research Database (Denmark)

    Faber, Stine Thidemann; Prieur, Annick

    . The paper picks out two sets of discourses from this city: on the one hand a newspapers discourses about the city’s brand and on the other interviews with female inhabitants about experiences and visions of social differences and divides. The analysis reveals indirect and euphemized forms of class divisions...

  15. Adeus à classe trabalhadora?

    Directory of Open Access Journals (Sweden)

    Geoff Eley

    2013-12-01

    Full Text Available No início da década de 1980, a política centrada em classes da tradição socialista estava em crise, e comentadores importantes adotaram tons apocalípticos. No final da década, a esquerda permanecia profundamente dividida entre os advogados da mudança e os defensores da fé. Em meados dos anos 1990, os primeiros tinham, de modo geral, ganhado a batalha. O artigo busca apresentar essa mudança contemporânea não como a 'morte da classe', mas como o desa­parecimento de um tipo particular de ­sociedade de classes, marcado pelo ­processo de formação da classe trabalhadora entre os anos 1880 e 1940 e pelo alinhamento político daí resultante, atingindo seu apogeu na construção social-democrata do acordo do pós-guerra. Quando mudanças de longo prazo na economia se combinaram com o ataque ao keynesianismo na política de recessão a partir de meados da década de 1970, a unidade da classe trabalhadora deixou de estar disponível da forma antiga e bastante utilizada, como o terreno natural da política de esquerda. Enquanto uma coletividade dominante da classe trabalhadora entrou em declínio, outra se corporificou de modo lento e desigual para tomar o lugar daquela. Mas a unidade operacional dessa nova agregação da classe trabalhadora ainda está, em grande parte, em formação. Para recuperar a eficácia política da tradição socialista, alguma nova visão de agência política coletiva será necessária, uma visão imaginativamente ajustada às condições emergentes da produção e acumulação capitalista no início do século XXI.

  16. Spirulina platensis Improves Mitochondrial Function Impaired by Elevated Oxidative Stress in Adipose-Derived Mesenchymal Stromal Cells (ASCs) and Intestinal Epithelial Cells (IECs), and Enhances Insulin Sensitivity in Equine Metabolic Syndrome (EMS) Horses

    Science.gov (United States)

    Nawrocka, Daria; Kornicka, Katarzyna; Śmieszek, Agnieszka

    2017-01-01

    Equine Metabolic Syndrome (EMS) is a steadily growing life-threatening endocrine disorder linked to insulin resistance, oxidative stress, and systemic inflammation. Inflammatory microenvironment of adipose tissue constitutes the direct tissue milieu for various cell populations, including adipose-derived mesenchymal stromal cells (ASCs), widely considered as a potential therapeutic cell source in the course of the treatment of metabolic disorders. Moreover, elevated oxidative stress induces inflammation in intestinal epithelial cells (IECs)—the first-line cells exposed to dietary compounds. In the conducted research, we showed that in vitro application of Spirulina platensis contributes to the restoration of ASCs’ and IECs’ morphology and function through the reduction of cellular oxidative stress and inflammation. Enhanced viability, suppressed senescence, and improved proliferation of ASCs and IECs isolated from metabolic syndrome-affected individuals were evident following exposition to Spirulina. A protective effect of the investigated extract against mitochondrial dysfunction and degeneration was also observed. Moreover, our data demonstrate that Spirulina extract effectively suppressed LPS-induced inflammatory responses in macrophages. In vivo studies showed that horses fed with a diet based on Spirulina platensis supplementation lost weight and their insulin sensitivity improved. Thus, our results indicate the engagement of Spirulina platensis nourishing as an interesting alternative approach for supporting the conventional treatment of equine metabolic syndrome. PMID:28771165

  17. World Class Facilities Management

    DEFF Research Database (Denmark)

    Malmstrøm, Ole Emil; Jensen, Per Anker

    2013-01-01

    Alle der med entusiasme arbejder med Facilities Management drømmer om at levere World Class. DFM drømmer om at skabe rammer og baggrund for, at vi i Danmark kan bryste os at være blandt de førende på verdensplan. Her samles op på, hvor tæt vi er på at nå drømmemålet.......Alle der med entusiasme arbejder med Facilities Management drømmer om at levere World Class. DFM drømmer om at skabe rammer og baggrund for, at vi i Danmark kan bryste os at være blandt de førende på verdensplan. Her samles op på, hvor tæt vi er på at nå drømmemålet....

  18. La flotta di Classe

    OpenAIRE

    Gnoli, Tommaso

    2003-01-01

    Testo di una conferenza tenuta a Ravenna il 17 gennaio 2003. La flotta imperiale romana di Classe è presentata nel suo contesto storico e istituzionale. Inquadramento della condizione dei classiarii nell'ambito più generale dell'esercito romano. Ipotesi e problemi sullo sviluppo dell'area ravennate in età imperiale in rapporto all'installazione di questa grande unità militare.

  19. [Social classes and poverty].

    Science.gov (United States)

    Benach, Joan; Amable, Marcelo

    2004-05-01

    Social classes and poverty are two key social determinants fundamental to understand how disease and health inequalities are produced. During the 90's in Spain there has been a notable oscillation in the inequality and poverty levels, with an increase in the middle of the decade when new forms of social exclusion, high levels of unemployment and great difficulties in accessing the labour market, especially for those workers with less resources, emerged. Today society is still characterized by a clear social stratification and the existence of social classes with a predominance of high levels of unemployment and precarious jobs, and where poverty is an endemic social problem much worse than the EU average. To diminish health inequalities and to improve the quality of life will depend very much on the reduction of the poverty levels and the improvement of equal opportunities and quality of employment. To increase understanding of how social class and poverty affect public health, there is a need to improve the quality of both information and research, and furthermore planners and political decision makers must take into account those determinants when undertaking disease prevention and health promotion.

  20. Class Action and Class Settlement in a European Perspective

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2013-01-01

    The article analyses the options for introducing common European rules on class action lawsuits with an opt-out-model in individual cases. An analysis is made of how the risks of misuse of class actions can be prevented. The article considers the Dutch rules on class settlements (the WCAM procedure...

  1. Class impressions : Higher social class elicits lower prosociality

    NARCIS (Netherlands)

    Van Doesum, Niels J.; Tybur, Joshua M.; Van Lange, Paul A.M.

    2017-01-01

    Social class predicts numerous important life outcomes and social orientations. To date, literature has mainly examined how an individual's own class shapes interactions with others. But how prosocially do people treat others they perceive as coming from lower, middle, or higher social classes?

  2. Class field theory

    CERN Document Server

    Artin, Emil

    2009-01-01

    This classic book, originally published in 1968, is based on notes of a year-long seminar the authors ran at Princeton University. The primary goal of the book was to give a rather complete presentation of algebraic aspects of global class field theory, and the authors accomplished this goal spectacularly: for more than 40 years since its first publication, the book has served as an ultimate source for many generations of mathematicians. In this revised edition, two mathematical additions complementing the exposition in the original text are made. The new edition also contains several new foot

  3. An "expanded" class perspective

    DEFF Research Database (Denmark)

    Steur, Luisa Johanna

    2014-01-01

    -back of Adivasis against their age-old colonization or the work of ‘external’ agitators. Capitalist restructuring and ‘globalization’ was generally seen as simply the latest chapter in the suffering of these Adivasis. Little focused attention was paid to the recent class trajectory of their lives under changing......Following the police raid on the ‘Muthanga’ land occupation by Adivasi (‘indigenous’) activists in Kerala, India, in February 2003, intense public debate erupted about the fate of Adivasis in this ‘model’ development state. Most commentators saw the land occupation either as the fight...

  4. ESPA Class Redefined

    OpenAIRE

    Sanford, Gregory; Williams, Andy; Maly, Joseph R.; Berenberg, Lisa

    2017-01-01

    ESPA is established launch infrastructure for small satellites on Atlas V, Falcon 9, and Delta IV. Satellites mount to ESPA in a cantilever mount with defined limits on spacecraft mass and center of gravity (CG). ESPA auxiliary payload (APL) capability was established by test in 2002 as 181 kg with CG at 51 cm (400 lb at 20 in). This mass/CG combination is a defining characteristic of the small satellite standard “ESPA class.” Increased APL capability for ESPA has been validated with Delta...

  5. LEVANTAMENTO PARA IMPLANTAÇÃO DE UM SISTEMA DE GESTÃO DA QUALIDADE SEGUNDO A NORMA NBR ISO/IEC 17025:2005 NO LABORATÓRIO DE CELULOSE E PAPEL DA UNESP-ITAPEVA

    Directory of Open Access Journals (Sweden)

    Bruno BATAGIN

    2013-11-01

    Full Text Available O objetivo desse trabalho é realizar um diagnóstico situacional do Laboratório de celulose e papel da UNESP- ITAPEVA para realização de proposta de acreditação de acordo com a NBR ISO/IEC 17025:2005. A NBR ISO/IEC 17025 estabelece os critérios para aqueles laboratórios que desejem demonstrar sua competência técnica, que possuem um sistema da qualidade efetivo e que são capazes de produzir resultados tecnicamente válidos, estabelecendo um padrão internacional e único para atestar a competência dos laboratórios para realizarem ensaios e/ou calibrações, incluindo amostragem. O estudo de caso foi realizado no laboratório de Celulose e Papel da Universidade Estadual Paulista (UNESP, campus de Itapeva, onde foram comparadas as visões do técnico responsável pelo laboratório e um usuário comum. A conclusão gerada é que o laboratório não tem condições de iniciar um processo de acreditação porque falha nos requisitos, como manual da qualidade, cadastro dos subcontratados, pesquisa de satisfação dos clientes, cronograma da realização das auditorias internas, cronograma de realização da análise crítica, perfil das funções requeridas, descrição das funções atuais, documentação dos requisitos técnicos para as acomodações e condições ambientais, programas de calibração, programa de calibração dos equipamentos, programa para calibração dos padrões e relatório e/ou certificado de ensaio e/ou calibração, que são de acordo com a NBR ISO/IEC 17025:2005, além de que não há a possibilidade de desenvolver e implantar um sistema de qualidade sem o comprometimento de todas as pessoas envolvidas, independente de hierarquia funcional. 

  6. Teachers, Social Class and Underachievement

    Science.gov (United States)

    Dunne, Mairead; Gazeley, Louise

    2008-01-01

    Addressing the "the social class attainment gap" in education has become a government priority in England. Despite multiple initiatives, however, little has effectively addressed the underachievement of working-class pupils within the classroom. In order to develop clearer understandings of working-class underachievement at this level,…

  7. Understanding Class in Contemporary Societies

    DEFF Research Database (Denmark)

    Harrits, Gitte Sommer

    2007-01-01

    In this paper, I argue that claims about the death of class and the coming of the classless society are premature. Such claims are seldom genuinely empirical, and the theoretical argument often refers to a simple and therefore easily dismissible concept of class. By rejecting the concept of class...

  8. Pseudo Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Fadia M. Al-Hummayani

    2016-04-01

    Full Text Available The treatment of deep anterior crossbite is technically challenging due to the difficulty of placing traditional brackets with fixed appliances. This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors. Treatment was carried out in 2 phases. Phase I treatment was performed by removable appliance “modified Hawley appliance with inverted labial bow,” some modifications were carried out to it to suit the presented case. Positive overbite and overjet was accomplished in one month, in this phase with minimal forces exerted on the lower incisors. Whereas, phase II treatment was performed with fixed appliances (braces to align teeth and have proper over bite and overjet and to close posterior open bite, this phase was accomplished within 11 month.

  9. Network class superposition analyses.

    Directory of Open Access Journals (Sweden)

    Carl A B Pearson

    Full Text Available Networks are often used to understand a whole system by modeling the interactions among its pieces. Examples include biomolecules in a cell interacting to provide some primary function, or species in an environment forming a stable community. However, these interactions are often unknown; instead, the pieces' dynamic states are known, and network structure must be inferred. Because observed function may be explained by many different networks (e.g., ≈ 10(30 for the yeast cell cycle process, considering dynamics beyond this primary function means picking a single network or suitable sample: measuring over all networks exhibiting the primary function is computationally infeasible. We circumvent that obstacle by calculating the network class ensemble. We represent the ensemble by a stochastic matrix T, which is a transition-by-transition superposition of the system dynamics for each member of the class. We present concrete results for T derived from boolean time series dynamics on networks obeying the Strong Inhibition rule, by applying T to several traditional questions about network dynamics. We show that the distribution of the number of point attractors can be accurately estimated with T. We show how to generate Derrida plots based on T. We show that T-based Shannon entropy outperforms other methods at selecting experiments to further narrow the network structure. We also outline an experimental test of predictions based on T. We motivate all of these results in terms of a popular molecular biology boolean network model for the yeast cell cycle, but the methods and analyses we introduce are general. We conclude with open questions for T, for example, application to other models, computational considerations when scaling up to larger systems, and other potential analyses.

  10. Type Families with Class, Type Classes with Family

    DEFF Research Database (Denmark)

    Serrano, Alejandro; Hage, Jurriaan; Bahr, Patrick

    2015-01-01

    Type classes and type families are key ingredients in Haskell programming. Type classes were introduced to deal with ad-hoc polymorphism, although with the introduction of functional dependencies, their use expanded to type-level programming. Type families also allow encoding type-level functions......, now as rewrite rules. This paper looks at the interplay of type classes and type families, and how to deal with shortcomings in both of them. Furthermore, we show how to use families to simulate classes at the type level. However, type families alone are not enough for simulating a central feature...

  11. Second Class Minors

    Science.gov (United States)

    Sahara, Hiroeki; Shastri, Nilabh

    2003-01-01

    CD4 T cells regulate immune responses that cause chronic graft rejection and graft versus host disease but their target antigens remain virtually unknown. We developed a new method to identify CD4 T cell–stimulating antigens. LacZ-inducible CD4 T cells were used as a probe to detect their cognate peptide/MHC II ligand generated in dendritic cells fed with Escherichia coli expressing a library of target cell genes. The murine H46 locus on chromosome 7 was thus found to encode the interleukin 4–induced IL4i1 gene. The IL4i1 precursor contains the HAFVEAIPELQGHV peptide which is presented by Ab major histocompatibility complex class II molecule via an endogenous pathway in professional antigen presenting cells. Both allelic peptides bind Ab and a single alanine to methionine substitution at p2 defines nonself. These results reveal novel features of H loci that regulate CD4 T cell responses as well as provide a general strategy for identifying elusive antigens that elicit CD4 T cell responses to tumors or self-tissues in autoimmunity. PMID:12566421

  12. Reconciling Virtual Classes with Genericity

    DEFF Research Database (Denmark)

    Ernst, Erik

    2006-01-01

    is functional abstraction, yielding more precise knowledge about the outcome; the prime ex- ample is type parameterized classes. This paper argues that they should be clearly separated to work optimally. We have applied this design philosophy to a lan- guage based on an extension mechanism, namely virtual...... classes. As a result, a kind of type parameters have been introduced, but they are simple and only used where they excel. Conversely, final definitions of virtual classes have been re- moved from the language, thus making virtual classes more flexible. The result- ing language presents a clearer and more...

  13. Are Ghanaian Diaspora Middle Class? Linking Middle Class to ...

    African Journals Online (AJOL)

    What constitutes the Ghanaian middle class? How do they organise themselves politically? Are they truly the vanguard of political stability in Ghana? If so, how have they accomplished this? These are some of the questions the article will provide answers to. Keywords: Diaspora, Middle Class, Political Participation ...

  14. Class Matters in the Interview Setting? Positionality, Situatedness and Class

    Science.gov (United States)

    Mellor, Jody; Ingram, Nicola; Abrahams, Jessie; Beedell, Phoebe

    2014-01-01

    In this article we argue that despite methodological and analytical advancements in the field of social class research, these developments have not led to a wholehearted discussion about class positionality and situatedness in relation to interviewer-participant dynamics. Despite--or perhaps due to--this methodological gap, there remains an…

  15. Subaltern Classes, Class Struggles and Hegemony : a Gramscian Approach

    Directory of Open Access Journals (Sweden)

    Ivete Simionatto

    2009-01-01

    Full Text Available This article sought to revive the concept of subaltern classes and their relation with other categories, particularly the State, civil society and hegemony in the thinking of Antonio Gramsci, as a support for contemporary class struggles. It also analyzes the relations between subaltern classes, common sense and ideology, as well as the forms of “overcoming” conceptualized by Gramsci, through the culture and philosophy of praxis. The paper revives the discussion of the subaltern classes, based on the original Gramscian formulation in the realm of Marxism, through the dialectic interaction between structure and superstructure, economy and politics. In addition to the conceptual revival, it indicates some elements that can support the discussion of the forms of subalternity found in contemporary reality and the possibilities for strengthening the struggles of these class layers, above all in moments of strong demobilization of popular participation.

  16. Race and Class on Campus

    Science.gov (United States)

    Perez, Angel B.

    2016-01-01

    Colleges and universities have a significant role to play in shaping the future of race and class relations in America. As exhibited in this year's presidential election, race and class continue to divide. Black Lives Matter movements, campus protests, and police shootings are just a few examples of the proliferation of intolerance, and higher…

  17. Social Class and the Extracurriculum

    Science.gov (United States)

    Barratt, Will

    2012-01-01

    Social class is a powerful and often unrecognized influence on student participation in the extracurriculum. Spontaneous student-created extracurricular experiences depend on students affiliating and interacting with each other; student social class is a powerful influence on student affiliations. Students tend to exercise consciousness of kind-…

  18. Class Differences in Cohabitation Processes

    Science.gov (United States)

    Sassler, Sharon; Miller, Amanda J.

    2011-01-01

    Despite the burgeoning cohabitation literature, research has failed to examine social class variation in processes of forming and advancing such unions. Drawing upon in-depth interviews with 122 working- and middle-class cohabitors, we examine the duration between dating and moving in together, reasons for cohabiting, and subsequent plans.…

  19. 75 FR 17297 - Account Class

    Science.gov (United States)

    2010-04-06

    ... COMMODITY FUTURES TRADING COMMISSION 17 CFR Part 190 RIN 3038-AC94 Account Class AGENCY: Commodity... ``Commission'') is amending its regulations (the ``Regulations'') \\1\\ to create a sixth and separate ``account... Commission can be found at 17 CFR Chapter 1. \\2\\ In general, the concept of ``account class'' governs the...

  20. Class 1 railroad statistics, 2010

    Science.gov (United States)

    2010-05-24

    U.S. Class I Railroads are line haul freight railroads with 2008 operating revenue in excess of $401.4 million. Two Canadian railroads, CN and Canadian Pacific, have enough revenue that they would be U.S. Class I railroads if they were U.S. companies...

  1. A Touch of...Class!

    Science.gov (United States)

    Netten, Joan W., Ed.

    1984-01-01

    A collection of ideas for class activities in elementary and secondary language classes includes a vocabulary review exercise and games of memory, counting, vocabulary, flashcard tic-tac-toe, dice, trashcans, questioning, and spelling. Some are designed specifically for French. (MSE)

  2. Propagating Class and Method Combination

    DEFF Research Database (Denmark)

    Ernst, Erik

    1999-01-01

    number of implicit combinations. For example, it is possible to specify separate aspects of a family of classes, and then combine several aspects into a full-fledged class family. The combination expressions would explicitly combine whole-family aspects, and by propagation implicitly combine the aspects...

  3. ADULT EDUCATION AND SOCIAL CLASS.

    Science.gov (United States)

    LONDON, JACK; AND OTHERS

    IDENTIFICATION OF SOME OF THE VARIABLES THAT ENCOURAGE OR DISCOURAGE PARTICIPATION IN ADULT EDUCATION AMONG MIDDLE-CLASS AND WORKING-CLASS MEN WAS THE BASIS FOR THIS STUDY. A COMMUNITY SURVEY WAS USED TO LOCATE A SAMPLE OF PARTICIPANTS AND NONPARTICIPANTS, AS WELL AS TO PROVIDE DESCRIPTIVE DATA ABOUT THE RATES OF PARTICIPATION. A MATCHED SAMPLE…

  4. CALCULATION AND EXPERIMENTAL ESTIMATION OF RESULTS OF ELECTRO-THERMAL ACTION OF RATIONED BY THE INTERNATIONAL STANDARD IEC 62305-1-2010 IMPULSE CURRENT OF SHORT BLOW OF ARTIFICIAL LIGHTNING ON THE THIN-WALLED COVERAGE FROM STAINLESS STEEL

    Directory of Open Access Journals (Sweden)

    M. I. Baranov

    2017-03-01

    Full Text Available Purpose. Calculation and experimental researches of electro-thermal resistibility of the pre-production thin-walled sheet models of outward roof of height technical buildings from stainless steel are easily soiled 12Х18Н10Т to direct action on them rationed by the International Standard IEC 62305-1-2010 aperiodic impulse of current of short bow of artificial lightning of temporal form 10/350 μs with the proper admittances on his peak-temporal parameters (PTP. Methodology. Electrophysics bases of technique of high voltage and large impulsive currents (LIC, and also scientific and technical bases of planning of high-voltage impulsive devices and measuring methods in them LIC with followings below extreme PTP: amplitude of impulse of current of ImL=200 кА (with admittance ±10 %; integral of action of impulse of current of JL=10·106 A2·s (with admittance ±35 %; %; duration of wavefront current of T1=10 μs (with admittance ±20 %; time, proper amplitude of impulse of current of ImL, tmL≤24 μs (with admittance ±20 %; duration of flowing of impulse of current of T2=350 μs (with admittance ±10 %. Results. The results of evaluation calculation and experimental researches of electro-thermal resistibility of the indicated pre-production sheet models are resulted measuring in the plan of 0,5 x 0,5 m from stainless steel are easily soiled the 12Х18Н10Т thickness of 1 mm to action on them of aperiodic impulse of current of short blow of artificial lightning with rationed PTP on the requirements of the International Standard IEC 62305-1-2010. In high current experiments amplitude of ImL of the aperiodic rationed impulse of current of artificial lightning of temporal form of T1/T2=15 μs/315 μs changed in the range of (100-184 кА. The integral of action of JL of impulse of current for I-IV of levels of protection of lightning of technical objects (TO numeral made from 2,32·106 А2·s to 7,88·106 А2·s, and the flowing through the

  5. The Relationship between Class I and Class II Methanol Masers

    OpenAIRE

    Ellingsen, S. P.

    2005-01-01

    The Australia Telescope National Facility Mopra millimetre telescope has been used to search for 95.1-GHz class I methanol masers towards sixty-two 6.6-GHz class II methanol masers. A total of twenty-six 95.1-GHz masers were detected, eighteen of these being new discoveries. Combining the results of this search with observations reported in the literature, a near complete sample of sixty-six 6.6-GHz class II methanol masers has been searched in the 95.1-GHz transition, with detections towards...

  6. Homogeneous products of conjugacy classes

    OpenAIRE

    Adan-Bante, Edith

    2006-01-01

    Let $G$ be a finite group and $a\\in G$. Let $a^G=\\{g^{-1}ag\\mid g\\in G\\}$ be the conjugacy class of $a$ in $G$. Assume that $a^G$ and $b^G$ are conjugacy classes of $G$ with the property that ${\\bf C}_G(a)={\\bf C}_G(b)$. Then $a^G b^G$ is a conjugacy class if and only if $[a,G]=[b,G]=[ab,G]$ and $[ab,G]$ is a normal subgroup of $G$.

  7. Three Classes of Orthomodular Lattices

    Science.gov (United States)

    Greechie, Richard J.; Legan, Bruce J.

    2006-02-01

    Let mathcal{OML} denote the class of all orthomodular lattices and mathcal{C} denote the class of those that are commutator-finite. Also, let mathcal{C}1 denote the class of orthomodular lattices that satisfy the block extension property, mathcal{C}2 those that satisfy the weak block extension property, and mathcal{C}3 those that are locally finite. We show that the following strict containments hold: mathcal{C} subset mathcal{C}1 subset mathcal{C}2 subset mathcal{C}3 subset mathcal{OML}.

  8. 76 FR 53048 - Amendment of Class D and Class E Airspace and Establishment of Class E Airspace; Casper, WY

    Science.gov (United States)

    2011-08-25

    ... Federal Aviation Administration 14 CFR Part 71 Amendment of Class D and Class E Airspace and Establishment of Class E Airspace; Casper, WY AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: This action amends Class D and Class E airspace at Casper, Natrona County International...

  9. 76 FR 64233 - Amendment of Class D and Class E Airspace and Establishment of Class E Airspace; Casper, WY

    Science.gov (United States)

    2011-10-18

    ... Federal Aviation Administration 14 CFR Part 71 Amendment of Class D and Class E Airspace and Establishment of Class E Airspace; Casper, WY AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... published in the Federal Register of August 25, 2011 that amends Class D and Class E airspace, and...

  10. 77 FR 9839 - Amendment of Class D and Class E Airspace, and Establishment of Class E Airspace; Bozeman, MT

    Science.gov (United States)

    2012-02-21

    ... Federal Aviation Administration 14 CFR Part 71 Amendment of Class D and Class E Airspace, and Establishment of Class E Airspace; Bozeman, MT AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: This action modifies Class D and Class E airspace at Bozeman, Gallatin Field Airport...

  11. Characterization of a test device for determination of the half value layer and of filtration with quality equity of materials in accordance with standard ABNT NBR IEC 60601-1-3

    International Nuclear Information System (INIS)

    Viana, Vlamir

    2012-01-01

    The motivation of this work was the development and validation of a device to perform the tests established by ABNT NBR IEC 60601-1-3 versions published in 2001 and 2011. The purpose of the tests is to determine the half-value layer – HVL and filtration with equivalent filtration quality in mmAl, materials that intercept the X-ray beam from their emission to the X-ray image receiving device. This filtration includes all the materials present in radiation source assembly, formed by the x-ray tube housing with x-ray tube inserted, the collimator (inherent filtration) and by materials present in the patients support, as Table and wall bucky, both incorporate image receiving device which is also evaluated. In the development was taken in consideration the routine of tests execution routine, in order to reduce the operator interaction with the system and in order to reduce the human factor in the execution, reflecting directly on the measurement uncertainty, in the runtime reduction of the runtime and radiation safety. The device was validated with respect to: a) Effect of positioning and distribution of the filters in the filter changer device; b) Influence of purity of the aluminum filter used in the device, and c) Comparison tests carried out with the testing device with respect to the tests carried out with a reference X-ray generator. (author)

  12. CRITERIOS Y CONSIDERACIONES METODOLÓGICAS Y TECNOLÓGICAS A TENER EN CUENTA EN EL DISEÑO E IMPLEMENTACIÓN DEL PROTOCOLO IEC 61850 EN LA AUTOMATIZACIÓN Y PROTECCIÓN DE SISTEMAS DE POTENCIA ELÉCTRICA

    Directory of Open Access Journals (Sweden)

    Juan Carlos Carreño Pérez

    2012-08-01

    Full Text Available En este artículo se estudia y analiza los elementos que se involucran en redes Ethernet implementadas en sistema eléctricos desarrollados con la norma IEC 61850. El concepto de redes inteligentes (RI está actualmente capturando la atención del sector eléctrico en todo el mundo y la norma es el primer avance para poder llegar a lo que se denomina red de distribución de energía eléctrica inteligente, por lo que uno de los objetivos principales de este escrito es dar a conocer la estructura y beneficios de la norma IEC 61850. Adicionalmente se presentan criterios y consideraciones que se deben tener en cuenta en el diseño de una red Ethernet para sistemas de potencia eléctrica.

  13. Less than a Class Set

    Science.gov (United States)

    Bennett, Kristin Redington

    2012-01-01

    The iPad holds amazing potential for classroom use. Just a few--or even only one--is enough to get results. Having a class set promotes traditional, whole-class instruction, but fewer iPads facilitate individualized and tailored instruction. In this article, the author discusses the potential of the iPad and suggests ways to put the iPad to use in…

  14. The theory of social classes Maurice Halbwachs

    OpenAIRE

    L. V. Kozlova

    2014-01-01

    The article considers the basic thesis of Maurice Halbwachs’s theory of social classes outlined in the “Social classes and morphology” (1942): the concept of class is revealed as the object of collective representation, the main characteristics of classes, the criteria for its selection and conditions for classes formation are analyzed.

  15. Effect of technology on student class performance and class absence.

    Science.gov (United States)

    Sesodia, Sanjay; Molnar, David

    2012-01-01

    This study examined the effect of instructional technology availability on the performance of students enrolled in a medical physiology course at a podiatric medical school. Multiple linear regression analysis was used to predict student overall test performance based on instructional technology, Medical College Admission Test score, undergraduate grade point average, and class absence. The availability of instructional technology was associated with a small decline in mean test performance and a small increase in class absence. Class absence had a negative effect on test performance only when the technology was available. Total Medical College Admission Test score and grade point average were positively correlated with performance. Instructional technology did not enhance absentee student course performance and, indeed, hurt it. Its use as a means of providing access to additional lecture material needs to be reevaluated.

  16. Imagining class : A study into material social class position, subjective identification, and voting behavior across Europe

    NARCIS (Netherlands)

    D'Hooge, L.; Achterberg, P.H.J.; Reeskens, T.

    2018-01-01

    The traditional approach to class voting has largely ignored the question whether material class positions coincide with subjective class identification. Following Sosnaud et al. (2013), this study evaluates party preferences when Europeans’ material and subjective social class do not coincide.

  17. Parenting classes: focus on discipline.

    Science.gov (United States)

    Campbell, J M

    1992-01-01

    Nurses in community settings have an opportunity to provide instruction related to health and life-style needs. An important consideration is the parental role. A particularly controversial and opinion-laden aspect of parenting is disciplining children. Discipline provides children with the security of clearly enforced rules to help them learn self-control and social standards. Parenting classes are worthwhile for people who have little formal or informal preparation. A survey of middle-class elementary school district parents' and childrens' attitudes toward discipline was conducted to develop meaningful parenting classes. Parents' feelings about being a mother or father were surprisingly negative. A parent educational program was developed to cover child growth and development and disciplinary practices. Parent evaluations led to continuation and an expansion of this program to other schools within the area.

  18. Inclusion relations between classes of hypergeometric functions

    Directory of Open Access Journals (Sweden)

    O. P. Ahuja

    1994-01-01

    Conjecture. In this paper we consider certain classes of analytic functions and examine the distortion and containment properties of generalized hypergeometric functions under some operators in these classes.

  19. Gender, social class, and women's employment.

    Science.gov (United States)

    McGinn, Kathleen L; Oh, Eunsil

    2017-12-01

    People in low-power positions, whether due to gender or class, tend to exhibit other-oriented rather than self-oriented behavior. Women's experiences at work and at home are shaped by social class, heightening identification with gender for relatively upper class women and identification with class for relatively lower class women, potentially mitigating, or even reversing, class-based differences documented in past research. Gender-class differences are reflected in women's employment beliefs and behaviors. Research integrating social class with gendered experiences in homes and workplaces deepens our understanding of the complex interplay between sources of power and status in society. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Are Ghanaian Diaspora Middle Class? Linking Middle Class to ...

    African Journals Online (AJOL)

    2015-06-24

    Jun 24, 2015 ... leaders went on to obtain higher education in the United Kingdom and the. United States in the 1940s, 1950s and .... The increasing number of returnee diasporans to Ghana can be partly attributed to the recent ... This emerging social class with a high purchasing power will, however, drive a niche in the ...

  1. On uniqueness of characteristic classes

    DEFF Research Database (Denmark)

    Feliu, Elisenda

    2011-01-01

    We give an axiomatic characterization of maps from algebraic K-theory. The results apply to a large class of maps from algebraic K-theory to any suitable cohomology theory or to algebraic K-theory. In particular, we obtain comparison theorems for the Chern character and Chern classes...... and for the Adams operations and ¿-operations on higher algebraic K-theory. We show that the Adams operations and ¿-operations defined by Grayson agree with the ones defined by Gillet and Soulé....

  2. Supervised Object Class Colour Normalisation

    DEFF Research Database (Denmark)

    Riabchenko, Ekatarina; Lankinen, Jukka; Buch, Anders Glent

    2013-01-01

    Colour is an important cue in many applications of computer vision and image processing, but robust usage often requires estimation of the unknown illuminant colour. Usually, to obtain images invariant to the illumination conditions under which they were taken, color normalisation is used....... In this work, we develop a such colour normalisation technique, where true colours are not important per se but where examples of same classes have photometrically consistent appearance. This is achieved by supervised estimation of a class specic canonical colour space where the examples have minimal variation...

  3. Active Learning in Large Classes

    DEFF Research Database (Denmark)

    Gørtz, Inge Li

    2011-01-01

    teaching large classes (more than 50 students), and describe how we successfully have in a second semester course in the Bachelor of Engineering (BEng) and Bachelor of Science Engineering (BSc Eng) program at the Technical University of Denmark (DTU). Approximately 200 students is attending...... the lectures in the course. The main idea is to use inductive, case-based learning, with many small exercises/ discussions during the lectures. We describe a framework for the lectures, that most lectures in the class were based on. The framework contains the conceive, design, and implement stage from the CDIO...

  4. Two classes of metric spaces

    Directory of Open Access Journals (Sweden)

    Isabel Garrido

    2016-04-01

    Full Text Available The class of metric spaces (X,d known as small-determined spaces, introduced by Garrido and Jaramillo, are properly defined by means of some type of real-valued Lipschitz functions on X. On the other hand, B-simple metric spaces introduced by Hejcman are defined in terms of some kind of bornologies of bounded subsets of X. In this note we present a common framework where both classes of metric spaces can be studied which allows us to see not only the relationships between them but also to obtain new internal characterizations of these metric properties.

  5. Enzymatic Browning: a practical class

    Directory of Open Access Journals (Sweden)

    Maria Teresa Pedrosa Silva Clerici

    2014-10-01

    Full Text Available This paper presents a practical class about the enzymes polyphenol oxidases, which have been shown to be responsible for the enzymatic browning of fruits and vegetables. Vegetables samples were submitted to enzymatic inactivation process with chemical reagents, as well as by bleaching methods of applying heat by conventional oven and microwave oven. Process efficiency was assessed qualitatively by both observing the guaiacol peroxidase activity and after the storage period under refrigeration or freezing. The practical results obtained in this class allow exploring multidisciplinary knowledge in food science, with practical applications in everyday life.

  6. 47 CFR 74.708 - Class A TV and digital Class A TV station protection.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Class A TV and digital Class A TV station... SERVICES Low Power TV, TV Translator, and TV Booster Stations § 74.708 Class A TV and digital Class A TV station protection. (a) The Class A TV and digital Class A TV station protected contours are specified in...

  7. Professional Elites in "Classes" Societies

    NARCIS (Netherlands)

    S.J. Magala (Slawomir)

    2003-01-01

    textabstractModern European identity has been forged in class struggles between the French revolution and fall of the Berlin Wall, which fell twice. Once, with the rest of the city in May 1945, when a national socialist alternative to a modernizing mix of parliamentary democracy and market economy

  8. Social Class and School Music

    Science.gov (United States)

    Bates, Vincent C.

    2012-01-01

    This article takes a practical look at social class in school music by exploring the manifestations and impact of three of its dimensions: financial resources, cultural practices, and social networks. Three suggestions are discussed: provide a free and equal music education for all students, understand and respect each student's cultural…

  9. Cultural Concepts for Spanish Classes.

    Science.gov (United States)

    Lertora, Luis H.

    This report integrates instructional materials and concepts on the teaching of culture in foreign language classes in three major areas. Part 1 deals with the description of sociocultural concepts of Spanish peoples with emphasis on the basic features of Latin American Culture including: (1) the family, (2) family events, (3) social peculiarities,…

  10. Ethnicity, class, and civil war

    DEFF Research Database (Denmark)

    Hechter, Michael Norman; Siroky, David

    2016-01-01

    Why are some countries prone to ethno-nationalist conflict, whereas others are plagued by class conflict? This is a question that has seldom been raised and rarely been examined empirically. This paper presents a social-structural theory to account for the variable incidence of these two forms...

  11. Civility in Classes and Sports

    Science.gov (United States)

    Lumpkin, Angela

    2010-01-01

    Civility is a polite or courteous act, expression, or standard of conduct, including the display of respect and tolerance to everyone. Teaching and modeling civility in classes and with sport teams is essential so students and athletes can learn the importance of and demonstrate civility in their interactions with others. Teachers and coaches…

  12. Nonobtuse simplices & special matrix classes

    NARCIS (Netherlands)

    Cihangir, A.

    2016-01-01

    This thesis focuses on the study of certain special classes of n-simplices that occur in the context of numerical analysis, linear algebra, abstract algebra, geometry, and combinatorics. The type of simplex that is of central interest is the nonobtuse simplex, a simplex without any obtuse dihedral

  13. Filters in Fuzzy Class Theory

    Czech Academy of Sciences Publication Activity Database

    Kroupa, Tomáš

    2008-01-01

    Roč. 159, č. 14 (2008), s. 1773-1787 ISSN 0165-0114 R&D Projects: GA MŠk 1M0572; GA AV ČR KJB100300502 Institutional research plan: CEZ:AV0Z10750506 Keywords : filter * prime filter * fuzzy class theory Subject RIV: BA - General Mathematics Impact factor: 1.833, year: 2008

  14. A Touch of...Class.

    Science.gov (United States)

    Courtel, Claudine, Ed.; Amyot, Denise, Ed.

    1985-01-01

    A series of class activities for French instruction includes uses of the telephone book, tape recordings, advertising, word and pattern games, and creation of a radio program. Suggestions for instruction of Canadian natives include games for animal, body, and clothing vocabulary. (MSE)

  15. Class-Size Effects in Secondary School

    Science.gov (United States)

    Krassel, Karl Fritjof; Heinesen, Eskil

    2014-01-01

    We analyze class-size effects on academic achievement in secondary school in Denmark exploiting an institutional setting where pupils cannot predict class size prior to enrollment, and where post-enrollment responses aimed at affecting realized class size are unlikely. We identify class-size effects combining a regression discontinuity design with…

  16. On the Meaning of Class Identification.

    Science.gov (United States)

    Ben-Porat, A.

    1987-01-01

    Asked 118 blue-collar employees to indicate whether they perceived class-based stratified structure, to rate themselves on standard class scale, and to assess correspondence between their class identification and six socioeconomic items. Economic items explained about 20 percent of class identification, and three were stable: income, influence on…

  17. Trabalho e classes sociais Work and social classes

    Directory of Open Access Journals (Sweden)

    Fernando Haddad

    1997-10-01

    Full Text Available Exposição, discussão e refutação das principais tentativas de atualizar a teoria marxista de classes e posterior reavaliação dessa teoria à luz da transformação da ciência em fator de produção e da possível perda de centralidade do trabalho no processo produtivo, tendo por base as interpretações lógicas da obra de Marx feitas por Ruy Fausto.Exposition, discussion and refutation of the main attempts of actualizing marxist class theory and a posterior reevaluation of this theory taking into account the transformation of Science into a factor of production and of the possible centrality-loss of work in the productive process, based on the logic interpretations of Marx's work made by Ruy Fausto.

  18. A class of quantum gate entanglers

    International Nuclear Information System (INIS)

    Heydari, Hoshang

    2010-01-01

    We construct quantum gate entanglers for different classes of multipartite states based on the definition of W and GHZ concurrence classes. First, we review the basic construction of concurrence classes based on the orthogonal complement of a positive operator valued measure (POVM) on quantum phase. Then, we construct quantum gate entanglers for different classes of multi-qubit states. In particular, we show that these operators can entangle multipartite states if they satisfy some conditions for W and GHZ classes of states. Finally, we explicitly give the W class and GHZ classes of quantum gate entanglers for four-qubit states.

  19. FDM Video Classe: Modes d'emploi pour la classe (FDM Video Class: Classroom Uses).

    Science.gov (United States)

    Beacco, Marcella Di Giura

    1996-01-01

    Content and design of the videotape series FDM Video Classe, produced by the journal "Le francais dans le monde," are described and classroom uses suggested. The materials are from authentic television programs, selected to illustrate aspects of French culture. It is suggested that the teacher also provide students with supporting…

  20. Concurrence classes for general pure multipartite states

    International Nuclear Information System (INIS)

    Heydari, Hoshang

    2005-01-01

    We propose concurrence classes for general pure multipartite states based on an orthogonal complement of a positive operator-valued measure on quantum phase. In particular, we construct W m class, GHZ m , and GHZ m-1 class concurrences for general pure m-partite states. We give explicit expressions for W 3 and GHZ 3 class concurrences for general pure three-partite states and for W 4 , GHZ 4 and GHZ 3 class concurrences for general pure four-partite states

  1. Understanding Intra-Class Knowledge Inside CNN

    OpenAIRE

    Wei, Donglai; Zhou, Bolei; Torrabla, Antonio; Freeman, William

    2015-01-01

    Convolutional Neural Network (CNN) has been successful in image recognition tasks, and recent works shed lights on how CNN separates different classes with the learned inter-class knowledge through visualization. In this work, we instead visualize the intra-class knowledge inside CNN to better understand how an object class is represented in the fully-connected layers. To invert the intra-class knowledge into more interpretable images, we propose a non-parametric patch prior upon previous CNN...

  2. Higher social class predicts increased unethical behavior

    OpenAIRE

    Piff, Paul K.; Stancato, Daniel M.; Côté, Stéphane; Mendoza-Denton, Rodolfo; Keltner, Dacher

    2012-01-01

    Seven studies using experimental and naturalistic methods reveal that upper-class individuals behave more unethically than lower-class individuals. In studies 1 and 2, upper-class individuals were more likely to break the law while driving, relative to lower-class individuals. In follow-up laboratory studies, upper-class individuals were more likely to exhibit unethical decision-making tendencies (study 3), take valued goods from others (study 4), lie in a negotiation (study 5), cheat to incr...

  3. Timely management of developing class III malocclusion

    OpenAIRE

    M R Yelampalli; M R Rachala

    2012-01-01

    Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of p...

  4. STUDENTS’ ANXIETIES IN SPEAKING CLASS

    Directory of Open Access Journals (Sweden)

    Mahyuzar Rahman

    2017-08-01

    Full Text Available This qualitative research discussed the anxieties the students of semester 3, English Department, IAIN STS Jambi faced during the speaking class. The result of the research indicated that the causes of the students’ anxieties were the lack of grammar mastery, pronunciation problem, lack of vocabulary, unconfident feeling, fear of making mistakes and feared of being laughed by other students. But the dominant factors found were the lack of grammar, the lack of good pronunciation, and lack of vocabulary mastery. The lecturer had taken part to overcome these problems by giving them motivation not to give up easily, how to cope with vocabulary problems, and how to prepare well before coming into the class.

  5. The Fermilab physics class library

    International Nuclear Information System (INIS)

    Fischler, M.; Brown, W.; Gaines, I.; Kennedy, R.D.; Marraffino, J.; Michelotti, L.; Sexton-Kennedy, E.; Yoh, J.; Adams, D.; Paterno, M.

    1997-02-01

    The Fermilab Physics Class Library Task Force has been formed to supply classes and utilities, primarily in support of efforts by CDF and D0 toward using C++. A collection of libraries and tools will be assembled via development by the task force, collaboration with other HEP developers, and acquisition of existing modules. The main emphasis is on a kit of resources which physics coders can incorporate into their programs, with confidence in robustness and correct behavior. The task force is drawn from CDF, DO and the FNAL Computing and Beams Divisions. Modules-containers, linear algebra, histograms, etc.-have been assigned priority, based on immediate Run II coding activity, and will be available at times ranging from now to late May

  6. Asymptotics for incidence matrix classes

    OpenAIRE

    Cameron, Peter; Prellberg, Thomas; Stark, Dudley

    2005-01-01

    We define {\\em incidence matrices} to be zero-one matrices with no zero rows or columns. A classification of incidence matrices is considered for which conditions of symmetry by transposition, having no repeated rows/columns, or identification by permutation of rows/columns are imposed. We find asymptotics and relationships for the number of matrices with $n$ ones in these classes as $n\\to\\infty$.

  7. Luminosity class of neutron reflectometers

    International Nuclear Information System (INIS)

    Pleshanov, N.K.

    2016-01-01

    The formulas that relate neutron fluxes at reflectometers with differing q-resolutions are derived. The reference luminosity is defined as a maximum flux for measurements with a standard resolution. The methods of assessing the reference luminosity of neutron reflectometers are presented for monochromatic and white beams, which are collimated with either double diaphragm or small angle Soller systems. The values of the reference luminosity for unified parameters define luminosity class of reflectometers. The luminosity class characterizes (each operation mode of) the instrument by one number and can be used to classify operating reflectometers and optimize designed reflectometers. As an example the luminosity class of the neutron reflectometer NR-4M (reactor WWR-M, Gatchina) is found for four operation modes: 2.1 (monochromatic non-polarized beam), 1.9 (monochromatic polarized beam), 1.5 (white non-polarized beam), 1.1 (white polarized beam); it is shown that optimization of measurements may increase the flux at the sample up to two orders of magnitude with monochromatic beams and up to one order of magnitude with white beams. A fan beam reflectometry scheme with monochromatic neutrons is suggested, and the expected increase in luminosity is evaluated. A tuned-phase chopper with a variable TOF resolution is recommended for reflectometry with white beams.

  8. IEC Newsletter, No. 46, Fourth Quarter 2013

    International Nuclear Information System (INIS)

    2014-02-01

    ConvEx exercises (Convention Exercises) are prepared for Member States and relevant international organizations by the IAEA under the framework of the Convention on Early Notification of a Nuclear Accident and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency. These exercises are carried out at three levels of complexity with the third level (ConvEx-3) being a full scale exercise prepared every three to five years within the Inter-Agency Committee on Radiological and Nuclear Emergencies (IACRNE), which comprises 17 international intergovernmental organizations. ConvEx-3 (2013), code-named 'Bab Al Maghrib', was hosted by Morocco and designed to allow Member States and international organizations to evaluate their response in a severe radiological emergency triggered by a nuclear security event and to identify emergency preparedness and response (EPR) areas requiring improvements. The exercise was conducted on 20 and 21 November 2013 and lasted approximately 25 hours. Fifty-nine Member States (including Morocco) and ten international organizations (including the IAEA) participated in the exercise. Twenty-four of the participating Member States and six of the international organizations participated in the exercise at the highest level possible (Level B) to actively test their EPR arrangements and capabilities for responding to such an event, and to test the sharing and exchange of information internationally. During the exercise, several Member States actively offered their national assistance capabilities to the exercise Accident State (Morocco). It was the first time in the history of ConvEx-3 exercises that country specific injects were prepared in a way that required specific Member State responses. The active participation of relevant international organizations (including INTERPOL and EUROPOL), information sharing, response coordination and sharing public updates among press officers of these organizations contributed to a harmonized international response and consistent information to the public. The active role played by the Agency's Director General, senior Agency staff and the Moroccan management in the exercise helped to stress the importance of conducted exercises. Chief evaluators from Member States and international organizations, including the IAEA, are currently preparing evaluation reports. Based on these reports, the Lead Exercise Evaluator (IAEA) will prepare a final Exercise Report, which will be discussed at the ConvEx-3 (2013) evaluation meeting taking place in Vienna on 11-12 February 2014. The initial assessment and feedback underscore that this exercise was well prepared and achieved its objectives

  9. IEC Newsletter, No. 43, First Quarter 2013

    International Nuclear Information System (INIS)

    2013-07-01

    With an objective to enhance international emergency preparedness and response (EPR), the IAEA Board of Governors in 2004 approved the five-year International Action Plan for Strengthening the International Preparedness and Response System for Nuclear and Radiological Emergencies. In 2010 the action plan activities ended with a report that identified activities that need to be addressed by Member States and the IAEA Secretariat, recommended key strategic elements for successful implementation of sustainable EPR systems, and provided a number of detailed recommendations on international communications, international assistance and sustainable infrastructure. One of the key strategic elements recommended was to establish a senior EPR advisory group that would provide advice on EPR matters to the IAEA's Deputy Director General, Head of the Department of Nuclear Safety and Security. The Emergency Preparedness and Response Expert Group (EPREG) was established at the end of 2012 as a standing body of senior experts with high professional competence and demonstrated leadership in the field of preparedness for and response to radiation emergencies to provide advice to the IAEA Secretariat on actions needed to ensure continuous and coordinated EPR enhancement and implementation strategies. The group consists of 16 experts in EPR covering all regions. The first meeting of EPREG was convened on 11 and 12 February 2013. The purpose of the meeting was to constitute the EPREG, to discuss current international activities in the area of emergency preparedness and response and to discuss priorities for their further implementation

  10. 75 FR 51171 - Amendment of Class D and Class E Airspace; Kaneohe, HI

    Science.gov (United States)

    2010-08-19

    ...; Airspace Docket No. 10-AWP-10] Amendment of Class D and Class E Airspace; Kaneohe, HI AGENCY: Federal... Class D and Class E airspace at Kaneohe Bay Marine Corps Air Station (MCAS), Kaneohe, HI. The FAA is... airspace and Class E airspace upward from 700 feet above the surface at Kaneohe Bay MCAS, Kaneohe Bay, HI...

  11. Do class size effects differ across grades?

    DEFF Research Database (Denmark)

    Nandrup, Anne Brink

    This paper contributes to the class size literature by analyzing whether short-run class size effects are constant across grade levels in compulsory school. Results are based on administrative data on all pupils enroled in Danish public schools. Identification is based on a government-imposed class...... size cap that creates exogenous variation in class sizes. Significant (albeit modest) negative effects of class size increases are found for children on primary school levels. The effects on math abilities are statistically different across primary and secondary school. Larger classes do not affect...

  12. Revisiting Parametric Types and Virtual Classes

    DEFF Research Database (Denmark)

    Madsen, Anders Bach; Ernst, Erik

    2010-01-01

    This paper presents a conceptually oriented updated view on the relationship between parametric types and virtual classes. The traditional view is that parametric types excel at structurally oriented composition and decomposition, and virtual classes excel at specifying mutually recursive families...... of classes whose relationships are preserved in derived families. Conversely, while class families can be specified using a large number of F-bounded type parameters, this approach is complex and fragile; and it is difficult to use traditional virtual classes to specify object composition in a structural......, it shows how a novel kind of dynamic type check can detect compatibility among entire families of classes....

  13. Análisis en seguridad informática y seguridad de la información basado en la norma ISO/IEC 27001- sistemas de gestión de seguridad de la información dirigido a una empresa de servicios financieros

    OpenAIRE

    Bermúdez Molina, Kelly Gabriela

    2015-01-01

    Mediante la elaboración del análisis de seguridad de la información y seguridad informática basada en la norma ISO/IEC 27001, el presente trabajo tuvo como finalidad conocer las vulnerabilidades a las que está expuesta la información por la falta de aplicación de controles de seguridad. El análisis estuvo dirigido a una empresa financiera, teniendo como objetivo principal el estudio de seguridad en los procesos críticos. A través de reuniones, revisión de documentación, consultas, observa...

  14. Generación automática de la configuración de subestaciones eléctricas según el Estándar IEC 61850 a partir de una herramienta de diseño gráfico

    OpenAIRE

    Arribas López, Marcos

    2015-01-01

    La evolución de las redes eléctricas se dirige hacia lo que se conoce como “Smart Grids” o “Redes Eléctricas Inteligentes”. Estas “Smart Grids” se componen de subestaciones eléctricas, que a su vez se componen de unos dispositivos llamados IEDs (Dispositivos Electrónicos Inteligentes – Intelligent Electronic Devices). El diseño de IEDs se encuentra definido en la norma IEC 61850, que especifica además un Lenguaje de Configuración de Subestaciones (Substation Configuration Language SCL) para l...

  15. New class of combustion processes

    International Nuclear Information System (INIS)

    Merzhanov, A.G.; Borovinskaya, I.P.

    1975-01-01

    A short review is given of the results of work carried out since 1967 on studying the combustion processes caused by the interaction of chemical elements in the condensed phase and leading to the formation of refractory compounds. New phenomena and processes are described which are revealed when investigating the combustion of the systems of this class, viz solid-phase combustion, fast combustion in the condensed phase, filtering combustion, combustion in liquid nitrogen, spinning combustion, self-oscillating combustion, and repeated combustion. A new direction in employment of combustion processes is discussed, viz. a self-propagating high-temperature synthesis of refractory nitrides, carbides, borides, silicides and other compounds

  16. First-Class Object Sets

    DEFF Research Database (Denmark)

    Ernst, Erik

    Typically, objects are monolithic entities with a fixed interface. To increase the flexibility in this area, this paper presents first-class object sets as a language construct. An object set offers an interface which is a disjoint union of the interfaces of its member objects. It may also be used...... for a special kind of method invocation involving multiple objects in a dynamic lookup process. With support for feature access and late-bound method calls object sets are similar to ordinary objects, only more flexible. The approach is made precise by means of a small calculus, and the soundness of its type...

  17. Mandatory Class 1 Federal Areas Web Service

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web service contains the following layers: Mandatory Class 1 Federal Area polygons and Mandatory Class 1 Federal Area labels in the United States. The polygon...

  18. 48 CFR 2901.404 - Class deviations.

    Science.gov (United States)

    2010-10-01

    ... ACQUISITION REGULATION SYSTEM Deviations From the FAR and DOLAR 2901.404 Class deviations. (a) The Senior Procurement Executive is authorized to approve class deviations from FAR or DOLAR provisions which affect more...

  19. 29 CFR 1614.204 - Class complaints.

    Science.gov (United States)

    2010-07-01

    ... that discriminates against the group on the basis of their race, color, religion, sex, national origin... practice adversely affecting the class as well as the specific action or matter affecting the class agent...

  20. Investment Company Series and Class Information

    Data.gov (United States)

    Securities and Exchange Commission — The Series and Class Report provides basic identification information for all active registered investment company series and classes that have been issued IDs by...

  1. Software extension and integration with type classes

    DEFF Research Database (Denmark)

    Lämmel, Ralf; Ostermann, Klaus

    2006-01-01

    expressiveness, by using the language concept of \\emph{type classes}, as it is available in the functional programming language Haskell. A detailed comparison with related work shows that type classes provide a powerful framework in which solutions to known software extension and integration problems can...... be provided. We also pinpoint several limitations of type classes in this context....

  2. Intersection numbers with Witten's top Chern class

    NARCIS (Netherlands)

    Shadrin, S.; Zvonkine, D.

    2008-01-01

    Witten’s top Chern class is a particular cohomology class on the moduli space of Riemann surfaces endowed with r-spin structures. It plays a key role in Witten’s conjecture relating to the intersection theory on these moduli spaces. Our first goal is to compute the integral of Witten’s class over

  3. On the structure of the class NP

    OpenAIRE

    Plotnikov, Anatoly D.

    2013-01-01

    A new class UF of problems is introduced, strictly included in the class NP, which arises in the analysis of the time verifying the intermediate results of computations. The implications of the introduction of this class are considered. First of all, we prove that $P\

  4. Conceptualizing "Homework" in Flipped Mathematics Classes

    Science.gov (United States)

    de Araujo, Zandra; Otten, Samuel; Birisci, Salih

    2017-01-01

    Flipped instruction is becoming more common in the United States, particularly in mathematics classes. One of the defining characteristics of this increasingly popular instructional format is the homework teachers assign. In contrast to traditional mathematics classes in which homework consists of problem sets, homework in flipped classes often…

  5. Factors Related to In-Class Spiritual Experience: Relationship between Pre-Class Scripture Reading, In-Class Note-Taking, and Perceived In-Class Spiritual Experiences

    Science.gov (United States)

    Hilton, John, III; Sweat, Anthony R.; Plummer, Kenneth

    2015-01-01

    The purpose of this study is to examine the relationship between student in-class note-taking and pre-class reading with perceived in-class spiritual and religious outcomes. This study surveyed 620 students enrolled in six different sections of an introductory religion course at a private religious university. Full-time religious faculty members…

  6. Class composition influences on pupils' cognitive development

    NARCIS (Netherlands)

    Peetsma, T.; van der Veen, I.; Koopman, P.; van Schooten, E.

    2006-01-01

    The proportion of low-achieving children in a class can affect the progress of individual pupils in that class. Having a large proportion of low achievers in a class could slow down growth in cognitive achievement but, might also boost such growth, due to the effects of specialist teaching geared to

  7. A class of Yang-Mills solutions

    International Nuclear Information System (INIS)

    Castillejo, L.; Kugler, M.

    1980-09-01

    We investigate a class of solutions of the classical SU(2) Yang-Mills equations. The symmetry of this class prescribes a natural set of gauge invariant degrees of freedom. Using these degrees of freedom we obtain a simple set of equations which enables us to find all the solutions belonging to the class under discussion. (Author)

  8. Application of TBT in Reading Class

    Science.gov (United States)

    Yu, Hong-qin

    2007-01-01

    "TBT" means "task-based teaching". In a TBT class, students play the central role. In the class where students are provided with plenty of chances to be engaged in activities, the teacher is more like a patient listener rather than a talkative speaker. This paper mainly explores how task-based teaching is used in English reading class.

  9. Making the Most of Your Class Website

    Science.gov (United States)

    Dunn, Lemoyne S.

    2011-01-01

    Students today are electronically connected, and they expect their learning to be connected as well. Many college students prefer online classes, even if they live on campus. Students who do take face-to-face classes often expect the class to have an online communication component (such as a discussion board). However, despite the fact that K-12…

  10. The Upper Class in Higher Education

    Science.gov (United States)

    Useem, Michael; Miller, S. M.

    1977-01-01

    The college education of upper-class youth facilitates the renewal of the upper class, since colleges give their students the personality, values, and personal contacts needed to manage the modern corporation. Higher education should equalize both cognitive and noncognitive gains for all social classes. (Author/JM)

  11. The Social Psychology of Class and Classism

    Science.gov (United States)

    Lott, Bernice

    2012-01-01

    In the United States, one is born into a family that can be identified as working class, middle class, or affluent--divisions that denote status and power, as defined by access to resources. This article explores the relationships between social class membership and a wide array of personal and social daily life experiences. It concludes with a…

  12. Do Class Size Effects Differ across Grades?

    Science.gov (United States)

    Nandrup, Anne Brink

    2016-01-01

    This paper contributes to the class size literature by analysing whether short-run class size effects are constant across grade levels in compulsory school. Results are based on administrative data on all pupils enrolled in Danish public schools. Identification is based on a government-imposed class size cap that creates exogenous variation in…

  13. 7 CFR 30.5 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 30.5 Section 30.5 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... AND STANDARDS Classification of Leaf Tobacco Covering Classes, Types and Groups of Grades § 30.5 Class...

  14. Imagining class: A study into material social class position, subjective identification, and voting behavior across Europe.

    Science.gov (United States)

    D'Hooge, Lorenzo; Achterberg, Peter; Reeskens, Tim

    2018-02-01

    The traditional approach to class voting has largely ignored the question whether material class positions coincide with subjective class identification. Following Sosnaud et al. (2013), this study evaluates party preferences when Europeans' material and subjective social class do not coincide. Seminal studies on voting behavior have suggested that members of lower classes are more likely to vote for the economic left and cultural right and that higher classes demonstrate the opposite pattern. Yet, these studies have on the one hand overlooked the possibility that there is a mismatch between the material class people can be classified in and the class they think they are part of, and on the other hand the consequences of this discordant class identification on voting behavior. Analyzing the 2009 wave of the European Elections Study, we find that the majority of the Europeans discordantly identify with the middle class, whereas only a minority of the lower and higher classes concordantly identify with their material social class. Further, material class only seems to predict economic voting behavior when it coincides with subjective class; for instance, individuals who have an inflated class identification are more likely to vote for the economic left, even when they materially can be classified as middle or high class. We conclude this paper with a discussion on scholarly debates concerning class and politics. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. The character strengths of class clowns.

    Science.gov (United States)

    Ruch, Willibald; Platt, Tracey; Hofmann, Jennifer

    2014-01-01

    Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of "identified as a class clown," "comic talent," "disruptive rule-breaker," and "subversive joker." Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park and Peterson, 2006) showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, class clown behaviors were generally shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors "identified as the class clown" and "comic talent" were correlated with leadership strengths and the two negative factors ("disruptive rule-breaker," "subversive joker") were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

  16. A Class-Specific Optimizing Compiler

    Directory of Open Access Journals (Sweden)

    Michael D. Sharp

    1993-01-01

    Full Text Available Class-specific optimizations are compiler optimizations specified by the class implementor to the compiler. They allow the compiler to take advantage of the semantics of the particular class so as to produce better code. Optimizations of interest include the strength reduction of class:: array address calculations, elimination of large temporaries, and the placement of asynchronous send/recv calls so as to achieve computation/communication overlap. We will outline our progress towards the implementation of a C++ compiler capable of incorporating class-specific optimizations.

  17. New universality class in three dimensions

    DEFF Research Database (Denmark)

    Codello, A.; Safari, M.; Vacca, G. P.

    2017-01-01

    We study the Blume-Capel universality class in d=103-ϵ dimensions. The renormalization group flow is extracted by looking at poles in fractional dimension of three loop diagrams using MS. The theory is the only nontrivial universality class which admits an expansion to three dimensions with ϵ=13<......-Capel classes as special cases.......We study the Blume-Capel universality class in d=103-ϵ dimensions. The renormalization group flow is extracted by looking at poles in fractional dimension of three loop diagrams using MS. The theory is the only nontrivial universality class which admits an expansion to three dimensions with ϵ=13...

  18. Class effects on racial inequality in Brazil

    Directory of Open Access Journals (Sweden)

    José Alcides Figueiredo Santos

    2006-01-01

    Full Text Available This article analyzes the conditioning exercised by class inequality on racial inequality in income between whites and non-whites (the latter including both pardos, or mixed race, and pretos, or blacks in Brazil. The study uses linear regression techniques aimed at unveiling the "moderating" effect of class categories in the attenuation or exacerbation of race effects on personal income. There is a racial gap favoring whites in nearly all class categories, but its effect is significantly moderated by class condition. The racial gap in income is higher among middle-class positions and especially among managers. The proletarian segments per se display the lowest racial gaps in income.

  19. First-Class Object Sets

    DEFF Research Database (Denmark)

    Ernst, Erik

    2009-01-01

    Typically, an object is a monolithic entity with a fixed interface.  To increase flexibility in this area, this paper presents first-class object sets as a language construct.  An object set offers an interface which is a disjoint union of the interfaces of its member objects.  It may also be used...... for a special kind of method invocation involving multiple objects in a dynamic lookup process.  With support for feature access and late-bound method calls, object sets are similar to ordinary objects, only more flexible.  Object sets are particularly convenient as a lightweight primitive which may be added...

  20. Vibhute Class II Correction Appliance

    Directory of Open Access Journals (Sweden)

    Pavankumar Janardan Vibhute

    2013-01-01

    Full Text Available Fixed functional appliances have gained the popularity for growth modification in noncompliant patients, especially hybrid types. But for this, clinicians have to depend on certain commercially available appliances; otherwise components required in fabrication of hybrid type appliances are not routinely available in clinics, which discourage their, use. Additionally, these preformed appliances have less scope in changing their length as per patient′s requirement of particular mandibular advancement. This article explains the chairside fabrication of open coil NiTi spring loaded hybrid type fixed functional appliance named ′Vibhute Class II Correction Appliance′ (VCCA. This custom-made tinier and hygienic design provides stable fixation, less breakages with increased range of mandibular movement involving unrestricted mouth opening. VCCA permits quick chairside fabrication with ease in installation of appliance and is inexpensive.

  1. Context-sensitive intra-class clustering

    KAUST Repository

    Yu, Yingwei

    2014-02-01

    This paper describes a new semi-supervised learning algorithm for intra-class clustering (ICC). ICC partitions each class into sub-classes in order to minimize overlap across clusters from different classes. This is achieved by allowing partitioning of a certain class to be assisted by data points from other classes in a context-dependent fashion. The result is that overlap across sub-classes (both within- and across class) is greatly reduced. ICC is particularly useful when combined with algorithms that assume that each class has a unimodal Gaussian distribution (e.g., Linear Discriminant Analysis (LDA), quadratic classifiers), an assumption that is not always true in many real-world situations. ICC can help partition non-Gaussian, multimodal distributions to overcome such a problem. In this sense, ICC works as a preprocessor. Experiments with our ICC algorithm on synthetic data sets and real-world data sets indicated that it can significantly improve the performance of LDA and quadratic classifiers. We expect our approach to be applicable to a broader class of pattern recognition problems where class-conditional densities are significantly non-Gaussian or multi-modal. © 2013 Elsevier Ltd. All rights reserved.

  2. Middle-class projects in modern Malaysia

    DEFF Research Database (Denmark)

    Fischer, Johan

    2017-01-01

    research projects that each in their own way examine how Malay Muslim informants understand and practice “middle-classness” in different spatial and temporal contexts. In short, my findings show how Malay Muslim middle-class projects such as Islamic consumption shape local class culture in Malaysia.......Within the last two decades or so there has been increased scholarly focus on the emergence, consolidation and future of the middle class in developing Asia. This is also the case with the Malay Muslim middle class in Malaysia, but how this class is developing over time is not well understood even...... if the Malays constitute the largest and fastest growing section of the middle class in Malaysia. Based on research projects I have carried out from the mid-1990s to the present, this article argues that an unpacking of the Malay Muslim middle class over time is important in order to understand the broader...

  3. 78 FR 21044 - Amendment of Class D and Class E Airspace; Reading, PA

    Science.gov (United States)

    2013-04-09

    ...-1270; Airspace Docket No. 12-AEA-16] Amendment of Class D and Class E Airspace; Reading, PA AGENCY... Class E Airspace at Reading, PA, as the SHAPP OM navigation aid has been decommissioned, requiring the... D and Class E airspace at Reading, PA (78 FR 5754) Docket No. FAA-2012-1270. Interested parties were...

  4. The bovine class II major histocompatibility complex : serological definition and further characterization of class II haplotypes

    NARCIS (Netherlands)

    Nilsson, P.R.

    1994-01-01

    In this thesis an analysis of the major histocompatibility complex (MHC) class II in cattle is reported, with emphasis on the development of class II serology. First, the production of class II alloantisera, and the serological definition of bovine MHC class II polymorphism is described.

  5. We are all ordinary people : Perceptions of class and class differences in personal relationships

    NARCIS (Netherlands)

    Van Eijk, G.

    2009-01-01

    This paper examines people’s perceptions of class and class differences—in general and with regard to personal relationships. Data from an original survey on personal networks (n=195) shows that most people think they are middle class, although many lower class respondents classify themselves as

  6. 77 FR 40488 - Amendment of Class D and Class E Airspace; Lakehurst, NJ

    Science.gov (United States)

    2012-07-10

    ...-0456; Airspace Docket No. 12-AEA-9] Amendment of Class D and Class E Airspace; Lakehurst, NJ AGENCY... changes the name of the airport associated with the Class D and Class E airspace at Lakehurst, NJ. The..., at Lakehurst, NJ. The airport name is changed from Lakehurst Naval Air Experimental Center Airport...

  7. 78 FR 21043 - Amendment of Class D and Class E Airspace; Caldwell, NJ

    Science.gov (United States)

    2013-04-09

    ...-0609; Airspace Docket No. 12-AEA-10] Amendment of Class D and Class E Airspace; Caldwell, NJ AGENCY... Class E Airspace at Caldwell, NJ as the Paterson Non-Directional Radio Beacon (NDB) has been... D and Class E airspace at Caldwell, NJ (78 FR 5149) Docket No. FAA-2012-0609. Interested parties...

  8. 47 CFR 73.6017 - Digital Class A TV station protection of Class A TV and digital Class A TV stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Digital Class A TV station protection of Class A TV and digital Class A TV stations. 73.6017 Section 73.6017 Telecommunication FEDERAL... Broadcast Stations § 73.6017 Digital Class A TV station protection of Class A TV and digital Class A TV...

  9. Class-E Amplifier Design Improvements for GSM Frequencies

    Directory of Open Access Journals (Sweden)

    Z. Nadir

    2011-06-01

    Full Text Available Efficient power amplifiers are essential in portable battery-operated systems such as mobile phones. Also, the power amplifier (PA is the most power-consuming building block in the transmitter of a portable system. This paper investigates how the efficiency of the power amplifier (which is beneficial for multiple applications in communcation sector can be improved by increasing the efficiency of switching mode class E power amplifiers for frequencies of 900 MHz and 1800 MHz. The paper tackles modeling, design improvements and verification through simulation for higher efficiencies. This is the continuation of previous work by the authors. These nonlinear power amplifiers can only amplify constant-envelope RF signals without introducing significant distortion. Mobile systems such as Advanced Mobile Phone System (AMPS and Global System for Mobile communications (GSM use modulation schemes which generate constant amplitude RF outputs in order to use efficient but nonlinear power amplifiers. Improvements in designs are suggested and higher efficiencies are achieved, to the tune of 67.1% (for 900 MHz and 67.0% (1800 MHz.

  10. Residents' Class Status and Social Political Attitude: Two Cases of Middle-Class Community in Beijing

    OpenAIRE

    Lipeng  ZHAO

    2016-01-01

    According to the data in two type of middle class community, this paper finds out that differences on residents' objective class status exist, so does subjective class status. The type of the community, occupation, and annual household income influences residents' subjective class status. This paper also compares people's social political attitude in two types of communities. People value some social political issues according to their subjective class status.

  11. Social class rank, essentialism, and punitive judgment.

    Science.gov (United States)

    Kraus, Michael W; Keltner, Dacher

    2013-08-01

    Recent evidence suggests that perceptions of social class rank influence a variety of social cognitive tendencies, from patterns of causal attribution to moral judgment. In the present studies we tested the hypotheses that upper-class rank individuals would be more likely to endorse essentialist lay theories of social class categories (i.e., that social class is founded in genetically based, biological differences) than would lower-class rank individuals and that these beliefs would decrease support for restorative justice--which seeks to rehabilitate offenders, rather than punish unlawful action. Across studies, higher social class rank was associated with increased essentialism of social class categories (Studies 1, 2, and 4) and decreased support for restorative justice (Study 4). Moreover, manipulated essentialist beliefs decreased preferences for restorative justice (Study 3), and the association between social class rank and class-based essentialist theories was explained by the tendency to endorse beliefs in a just world (Study 2). Implications for how class-based essentialist beliefs potentially constrain social opportunity and mobility are discussed.

  12. What are lay theories of social class?

    Science.gov (United States)

    Varnum, Michael E W

    2013-01-01

    Numerous studies have documented the effects of social class on psychological and behavioral variables. However, lay beliefs about how social class affects these dimensions have not been systematically tested. Studies 1 and 2 assessed lay beliefs about the association between social class and 8 variables (including psychological and behavioral tendencies and cognitive ability). Study 3 assessed lay beliefs about the Big five personality traits and social class, and study 4 reframed the 8 variables from study 1 in opposite terms and yielded similar results. Study 5 contained the variables framed as in both studies 1 and 4, and replicated those results suggesting that framing effects were not responsible for the effects observed. Interestingly, for the most part lay beliefs about social class did not differ as a function of participants' own social class. In general people held relatively accurate and consistent stereotypes about the relationship between social class and well-being, health, intelligence, and neuroticism. In contrast lay beliefs regarding social class and reasoning styles, as well as relational, social, and emotional tendencies were less consistent and coherent. This work suggests that on the whole people's beliefs about social class are not particularly accurate, and further that in some domains there are contradictory stereotypes about the consequences of social class.

  13. Class B0631+519: Last of the Class Lenses

    Energy Technology Data Exchange (ETDEWEB)

    York, Tom; Jackson, N.; Browne, I.W.A.; Koopmans, L.V.E.; McKean, J.P.; Norbury, M.A.; Biggs, A.D.; Blandford, R.D.; de Bruyn, A.G.; Fassnacht, C.D.; Myers, S.T.; Pearson, T.J.; Phillips, P.M.; Readhead, A.C.S.; Rusin, D.; Wilkinson, P.N.; /Jodrell Bank /Kapteyn Astron. Inst., Groningen /UC, Davis /JIVE, Dwingeloo /KIPAC, Menlo Park /NFRA,

    2005-05-31

    We report the discovery of the new gravitational lens system CLASS B0631+519. Imaging with the VLA, MERLIN and the VLBA reveals a doubly-imaged flat-spectrum radio core, a doubly-imaged steep-spectrum radio lobe and possible quadruply-imaged emission from a second lobe. The maximum separation between the lensed images is 1.16 arcsec. High resolution mapping with the VLBA at 5 GHz resolves the most magnified image of the radio core into a number of sub-components spread across approximately 20 mas. No emission from the lensing galaxy or an odd image is detected down to 0.31 mJy (5{sigma}) at 8.4 GHz. Optical and near-infrared imaging with the ACS and NICMOS cameras on the HST show that there are two galaxies along the line of sight to the lensed source, as previously discovered by optical spectroscopy. We find that the foreground galaxy at z=0.0896 is a small irregular, and that the other, at z=0.6196 is a massive elliptical which appears to contribute the majority of the lensing effect. The host galaxy of the lensed source is detected in the HST near-infrared imaging as a set of arcs, which form a nearly complete Einstein ring. Mass modeling using non-parametric techniques can reproduce the near-infrared observations and indicates that the small irregular galaxy has a (localized) effect on the flux density distribution in the Einstein ring at the 5-10% level.

  14. New class of neutron detectors

    International Nuclear Information System (INIS)

    Czirr, J.B.

    1997-01-01

    An optimized neutron scattering instrument design must include all significant components, including the detector. For example, useful beam intensity is limited by detector dead time; detector pixel size determines the optimum beam diameter, sample size, and sample to detector distance; and detector efficiency vs. wavelength determines the available energy range. As an example of the next generation of detectors that could affect overall instrumentation design, we will describe a new scintillator material that is potentially superior to currently available scintillators. We have grown and tested several small, single crystal scintillators based upon the general class of cerium-activated lithium lanthanide borates. The outstanding characteristic of these materials is the high scintillation efficiency-as much as five times that of Li-glass scintillators. This increase in light output permits the practical use of the exothermic B (n, alpha) reaction for low energy neutron detection. This reaction provides a four-fold increase in capture cross section relative to the Li (n, alpha) reaction, and the intriguing possibility of demanding a charged-particle/gamma ray coincidence to reduce background detection rates. These new materials will be useful in the thermal and epithermal energy ran at reactors and pulsed neutron sources

  15. Speech-based Class Attendance

    Science.gov (United States)

    Faizel Amri, Umar; Nur Wahidah Nik Hashim, Nik; Hazrin Hany Mohamad Hanif, Noor

    2017-11-01

    In the department of engineering, students are required to fulfil at least 80 percent of class attendance. Conventional method requires student to sign his/her initial on the attendance sheet. However, this method is prone to cheating by having another student signing for their fellow classmate that is absent. We develop our hypothesis according to a verse in the Holy Qur’an (95:4), “We have created men in the best of mould”. Based on the verse, we believe each psychological characteristic of human being is unique and thus, their speech characteristic should be unique. In this paper we present the development of speech biometric-based attendance system. The system requires user’s voice to be installed in the system as trained data and it is saved in the system for registration of the user. The following voice of the user will be the test data in order to verify with the trained data stored in the system. The system uses PSD (Power Spectral Density) and Transition Parameter as the method for feature extraction of the voices. Euclidean and Mahalanobis distances are used in order to verified the user’s voice. For this research, ten subjects of five females and five males were chosen to be tested for the performance of the system. The system performance in term of recognition rate is found to be 60% correct identification of individuals.

  16. A new Class of Extremal Composites

    DEFF Research Database (Denmark)

    Sigmund, Ole

    2000-01-01

    and for both well- and non-well-ordered isotropic constituent phases. The new class of composites constitutes an alternative to the three previously known extremal composite classes: finite rank laminates, composite sphere assemblages and Vigdergauz microstructures. An isotropic honeycomb-like hexagonal......The paper presents a new class of two-phase isotropic composites with extremal bulk modulus. The new class consists of micro geometrics for which exact solutions can be proven and their bulk moduli are shown to coincide with the Hashin-Shtrikman bounds. The results hold for two and three dimensions...... microstructure belonging to the new class of composites has maximum bulk modulus and lower shear modulus than any previously known composite. Inspiration for the new composite class comes from a numerical topology design procedure which solves the inverse homogenization problem of distributing two isotropic...

  17. The class pictures in citizens' minds.

    Science.gov (United States)

    Robison, Joshua; Stubager, Rune

    2017-10-07

    Social class has traditionally played a key role in explaining social behaviour and cognition. However, recent analyses have been dominated by the view that the relevance of class for behaviour has dwindled in advanced industrial societies. We contest this view by focusing on the subjective components of class consciousness. Using a national survey of Danish citizens, we show that individuals continue to hold meaningful conceptions of classes, to identify with them and, moreover, to perceive substantial levels of differences between them with these latter beliefs being strongly structured by respondent class identification. These results are all the more intriguing because they stem from a high affluence/low inequality national context that should be a particularly good case for failing to find such rich class perceptions. © London School of Economics and Political Science 2017.

  18. Exploring social class differences at work

    OpenAIRE

    Evans, Samantha

    2016-01-01

    This paper is part of a wider project that investigates how organisational and individual factors within the workplace contribute to social class differences and inequality by examining the relative impact of objective and subjective indicators of social class on explicit (e.g. salary, promotions) and implicit (e.g. career satisfaction, quality of working life, stress and well-being) career and work outcomes. \\ud There is increasing recognition that social class differences play a crucial rol...

  19. Using Nonverbal Communication in Efl Classes

    OpenAIRE

    Aysenil Barabar; Cagda Kivanc Caganaga

    2015-01-01

    This paper aims at providing information about nonverbal communication and to state its use in EFL classes. Briefly, this paper introduces the definition, aspects and importance of nonverbal communication. Especially, this study explains some ways of using nonverbal communication in EFL classes, in order to have good classroom management in the class. Based upon this assumption, we aimed to shed light on this area of research, by showing that teachers’ nonverbal behaviour plays a highly signi...

  20. Middle Class Youth: Myth or Reality

    Directory of Open Access Journals (Sweden)

    U V Goliusova

    2008-09-01

    Full Text Available Many researches both in Russia and abroad are concerned with the question of whether middle class exists in Russia and, if so, what its distinctive features are. The problem of particular interest is the sources of recruiting to that social group. One of its source clusters is youth. The article considers main traits of middle class youth, their self-identification and their perception of Russian middle class.

  1. ON nth CLASS PRESERVING AUTOMORPHISMS OF n ...

    Indian Academy of Sciences (India)

    92

    (H), which maps the group of nth class preserving auto- morphisms of G to the group of nth class preserving automorphisms of. H. Also, for a nilpotent group G of class (n + 1), if γn+1(G) is cyclic, then we prove that Aut γn+1(G). Zn(G). (G) is isomorphic to the group of inner automorphisms of a quotient group of G. 1.

  2. 7 CFR 1007.51 - Class I differential, adjustments to Class I prices, and Class I price.

    Science.gov (United States)

    2010-01-01

    ... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHEAST MARKETING AREA Order Regulating Handling Class Prices § 1007.51 Class I... MARENGO 01091 0.50 AL MARION 01093 0.20 AL MARSHALL 01095 0.40 AL MOBILE 01097 0.50 AL MONROE 01099 0.35...

  3. MHC class II expression in lung cancer.

    Science.gov (United States)

    He, Yayi; Rozeboom, Leslie; Rivard, Christopher J; Ellison, Kim; Dziadziuszko, Rafal; Yu, Hui; Zhou, Caicun; Hirsch, Fred R

    2017-10-01

    Immunotherapy is an exciting development in lung cancer research. In this study we described major histocompatibility complex (MHC) Class II protein expression in lung cancer cell lines and patient tissues. We studied MHC Class II (DP, DQ, DR) (CR3/43, Abcam) protein expression in 55 non-small cell lung cancer (NSCLC) cell lines, 42 small cell lung cancer (SCLC) cell lines and 278 lung cancer patient tissues by immunohistochemistry (IHC). Seven (12.7%) NSCLC cell lines were positive for MHC Class II. No SCLC cell lines were found to be MHC Class II positive. We assessed 139 lung cancer samples available in the Hirsch Lab for MHC Class II. There was no positive MHC Class II staining on SCLC tumor cells. MHC Class II expression on TILs in SCLC was significantly lower than that on TILs in NSCLC (P<0.001). MHC Class II was also assessed in an additional 139 NSCLC tumor tissues from Medical University of Gdansk, Poland. Patients with positive staining of MHC Class II on TILs had longer regression-free survival (RFS) and overall survival (OS) than those whose TILs were MHC Class II negative (2.980 years, 95% CI 1.628-4.332 vs. 1.050 years, 95% CI 0.556-1.554, P=0.028) (3.230 years, 95% CI 2.617-3.843 vs. 1.390 years, 95% CI 0.629-2.151, P=0.014). MHC Class II was expressed both in NSCLC cell lines and tissues. However, MHC Class II was not detected in SCLC cell lines or tissue tumor cells. MHC Class II expression was lower on SCLC TILs than on NSCLC TILs. Loss of expression of MHC Class II on SCLC tumor cells and reduced expression on SCLC TILs may be a means of escaping anti-cancer immunity. Higher MHC Class II expression on TILs was correlated with better prognosis in patients with NSCLC. Copyright © 2017. Published by Elsevier B.V.

  4. Class categories and the subjective dimension of class: the case of Denmark.

    Science.gov (United States)

    Harrits, Gitte Sommer; Pedersen, Helene Helboe

    2018-03-01

    Class relations have been proven to affect various aspects of social life, even in modern individualized societies. However, following claims on individualization and the so-called 'death of class' thesis, studying the subjective dimension of class - that is, the way individuals perceive of class relations and their own position within them - has gone out of style. We argue that even in equalized societies, subjective class perceptions may still influence attitudes and behaviour as they evolve to fit modern class relations. To explore the existence as well as structure and content of perceived social classes, this article investigates how people describe society and social groups in focus group discussions. We find that groups in different positions in terms of education and economy all tend to apply hierarchical class categories to describe Danish society, which is normally seen as one of the most equal societies and political systems in the world. In addition, we find that economic resources serve as a baseline for the hierarchical ordering, often supplemented with notions of education, lifestyle and/or occupational profile. Even though people are somewhat uncomfortable with the notion of class, their descriptions of Danish society and classes are surprisingly similar within and across groups. We conclude that not only do class relations matter; people are also highly aware of the existing classes and able to position themselves and others according to their notion of classes. © London School of Economics and Political Science 2017.

  5. Race, class, gender, and American environmentalism.

    Science.gov (United States)

    Dorceta E. Taylor

    2002-01-01

    This paper examines the environmental experiences of middle and working class whites and people of color in the United States during the 19th and 20th centuries. It examines their activism and how their environmental experiences influenced the kinds of discourses they developed. The paper posits that race, class, and gender had profound effects on people's...

  6. Higher Education and Class: Production or Reproduction?

    Science.gov (United States)

    Sotiris, Panagiotis

    2013-01-01

    This article deals with questions relating to the role of education and especially Higher Education in the reproduction of class division in society. Social classes and how they are formed and reproduced has always been one of the greatest challenges for Marxism and social theory in general. The questions regarding the role of education, and…

  7. Gender, Class and Rurality: Australian Case Studies

    Science.gov (United States)

    Bryant, Lia; Pini, Barbara

    2009-01-01

    The interrelationship between gender and class in rural spaces has received little attention. While rural scholars have focused on the implications for class from processes of gentrification and agricultural and rural restructuring, these analyses have remained largely ungendered. Similarly, feminist rural studies have rarely explored subjectivity…

  8. Student-Created Skits: Interactive Class Demonstrations.

    Science.gov (United States)

    Sheldon, Jane P.

    1996-01-01

    Describes a non-graded, one-class-period activity that can help undergraduates understand and explore fundamental psychological concepts. Groups of three or four students perform short skits illustrating basic concepts (moral development, defense mechanisms, identity status) and the class tries to guess the concept. (MJP)

  9. So, Where Are We with Class Size?

    Science.gov (United States)

    Johnson, Donald P.

    2001-01-01

    Although class-size reductions cannot guarantee better student performance, the Tennessee and Wisconsin experiences, along with other studies, suggest that successful programs share key characteristics: concentration in the primary schooling years, classes with not more than 20 students, greater benefits for urban minority students, and alignment…

  10. Social Class on Campus: Theories and Manifestations

    Science.gov (United States)

    Barratt, Will

    2011-01-01

    This is at once a playful text with a serious purpose: to provide the reader with the theoretical lenses to analyze the dynamics of social class. It will appeal to students, and indeed anyone interested in how class mediates relationships in higher education, both because of its engaging tone, and because it uses the college campus as a microcosm…

  11. Social Class and Education: Global Perspectives

    Science.gov (United States)

    Weis, Lois, Ed.; Dolby, Nadine, Ed.

    2012-01-01

    "Social Class and Education: Global Perspectives" is the first empirically grounded volume to explore the intersections of class, social structure, opportunity, and education on a truly global scale. Fifteen essays from contributors representing the US, Europe, China, Latin America and other regions offer an unparralleled examination of…

  12. An Operational Definition of Class Participation

    Science.gov (United States)

    Petress, Ken

    2006-01-01

    This article operationally defines effective student class participation. Optimum class management and effectiveness depends on students being actively engaged, supportive of each other, and civil in their exchanges. Examples of student behaviors to avoid are also discussed. Desired student classroom behavior is argued to be enhanced by good…

  13. Using Mobile Phone Technology in EFL Classes

    Science.gov (United States)

    Sad, Süleyman Nihat

    2008-01-01

    Teachers of English as a foreign language (EFL) who want to develop successful lessons face numerous challenges, including large class sizes and inadequate instructional materials and technological support. Another problem is unmotivated students who refuse to participate in class activities. According to Harmer (2007), uncooperative and…

  14. The YouTube Makeup Class

    Science.gov (United States)

    Haase, David G.

    2009-01-01

    When a college instructor goes out of town and must miss a lecture, the standard options are to cancel the class meeting or to enlist a colleague to fill in. In the former case a teaching opportunity is lost; in the latter the substitute may not lead the class in the same way as the instructor. Some students routinely skip lectures by a guest…

  15. 7 CFR 29.2255 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 29.2255 Section 29.2255 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Official Standard Grades for Virginia Fire-Cured Tobacco (u.s. Type 21) § 29.2255 Class...

  16. 7 CFR 29.1003 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 29.1003 Section 29.1003 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1003 Class. A major division of tobacco based on method of cure or principal usage. ...

  17. 7 CFR 29.3008 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 29.3008 Section 29.3008 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Class. A major division of tobacco based on method of cure or principal usage. [24 FR 8771, Oct. 29...

  18. 7 CFR 29.2505 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 29.2505 Section 29.2505 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...-Cured Tobacco (u.s. Types 22, 23, and Foreign Type 96) § 29.2505 Class. A major division of tobacco...

  19. 7 CFR 29.3506 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 29.3506 Section 29.3506 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3506 Class. A major division of tobacco based on method of cure or principal usage. ...

  20. Rapport: Coding Class - Dokumentation og evaluering

    DEFF Research Database (Denmark)

    Hansbøl, Mikala; Ejsing-Duun, Stine

    2017-01-01

    Denne rapport rummer evaluering og dokumentation af Coding Class projektet . Coding Class projektet blev igangsat i skoleåret 2016/2017 af IT-Branchen i samarbejde med en række medlemsvirksomheder, Københavns kommune, Vejle Kommune, Styrelsen for IT- og Læring (STIL) og den frivillige forening Co...

  1. Our Class as an Icosahedral Community.

    Science.gov (United States)

    Christman, Elizabeth Ann

    Multicultural study, visual and language arts, social studies, and geometry are integrated into this 2-month unit for the elementary classroom. The unit is divided into 3 segments, centering around the creation of a class icosahedron in which each of the shape's 20 faces represents 1 class member. Actual construction of the icosahedron constitutes…

  2. Conservatoire Students' Perceptions of Master Classes

    Science.gov (United States)

    Creech, Andrea; Gaunt, Helena; Hallam, Susan; Robertson, Linnhe

    2009-01-01

    The aim of this research was to investigate the value and purpose of Master Classes, from the perspective of Conservatoire students. Thirty-seven UK Conservatoire students responded to a questionnaire, providing information about their prior experiences of Master Classes, the factors that they considered to be important in a successful Master…

  3. Various chapter styles for the memoir class

    DEFF Research Database (Denmark)

    Madsen, Lars

    2012-01-01

    Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded.......Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded....

  4. Flipping a Calculus Class: One Instructor's Experience

    Science.gov (United States)

    Palmer, Katrina

    2015-01-01

    This paper describes one instructor's experiences during a year of flipping four calculus classes. The first exploration attempts to understand student expectations of a math class and their preference towards a flipped classroom. The second examines success of students from a flipped classroom, and the last investigates relationships with student…

  5. Automatically extracting class diagrams from spreadsheets

    NARCIS (Netherlands)

    Hermans, F.; Pinzger, M.; Van Deursen, A.

    2010-01-01

    The use of spreadsheets to capture information is widespread in industry. Spreadsheets can thus be a wealthy source of domain information. We propose to automatically extract this information and transform it into class diagrams. The resulting class diagram can be used by software engineers to

  6. Social class, dementia and the fourth age.

    Science.gov (United States)

    Jones, Ian Rees

    2017-02-01

    Research addressing social class and dementia has largely focused on measures of socioeconomic status as causal risk factors for dementia and in observed differences in diagnosis, treatment and care. This large body of work has produced important insights but also contains numerous problems and weaknesses. Research needs to take account of the ways in which ageing and social class have been transformed in tandem with the economic, social and cultural coordinates of late modernity. These changes have particular consequences for individual identities and social relations. With this in mind this article adopts a critical gaze on research that considers interactions between dementia and social class in three key areas: (i) epidemiological approaches to inequalities in risk (ii) the role of social class in diagnosis and treatment and (iii) class in the framing of care and access to care. Following this, the article considers studies of dementia and social class that focus on lay understandings and biographical accounts. Sociological insights in this field come from the view that dementia and social class are embedded in social relations. Thus, forms of distinction based on class relations may still play an important role in the lived experience of dementia. © 2017 Foundation for the Sociology of Health & Illness.

  7. Early cephalometric characteristics in Class III malocclusion

    OpenAIRE

    Farias,Vanessa Costa; Tesch,Ricardo de Souza; Denardin,Odilon Victor Porto; Ursi,Weber

    2012-01-01

    OBJECTIVE: Early identification of craniofacial morphological characteristics allows orthopedic segmented interventions to attenuate dentoskeletal discrepancies, which may be partially disguised by natural dental compensation. To investigate the morphological characteristics of Brazilian children with Class III malocclusion, in stages I and II of cervical vertebrae maturation and compare them with the characteristics of Class I control patients. METHODS: Pre-orthodontic treatment records of 2...

  8. 7 CFR 29.6006 - Class.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Class. 29.6006 Section 29.6006 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Definitions § 29.6006 Class. A major division of tobacco based on method of cure or...

  9. Software Training Classes Now Open | Poster

    Science.gov (United States)

    By Nancy Parrish, Staff Writer                                            Data Management Services, Inc. (DMS), has announced the opening of its spring session of software training classes, available to all employees at NCI at Frederick. Classes begin on March 31 and run through June 30.

  10. International Master Classes in health informatics

    NARCIS (Netherlands)

    Gatewood, L.; Limburg, M.; Gardner, R.; Haux, R.; Jaspers, M.; Schmidt, D.; Wetter, T.

    2004-01-01

    Master Classes arose within the performing arts and are now being offered in system sciences. The IPhiE group of faculty from six universities in Europe and the United States has offered Master Classes in health informatics to provide an integrative forum for honors students. Featured are

  11. Comparing traditional AP classes to portfolio AP classes in effectiveness of measuring knowledge.

    Directory of Open Access Journals (Sweden)

    Olona, L.

    2017-07-01

    Full Text Available High school students across the United States and internationally take Advanced Placement exams in May each year. These students also spend their school year enrolled in an Advanced Placement (AP class in preparation for the exam. There is a lack of research on any correlation between a student’s performance in class and performance on the exam. This study aims to compare the difference in correlation between traditional AP classes and portfolio AP classes. Second-semester grades and exam scores were collected from 2015 and 2016 from Norman High School students. Traditional classes had weak, if any, correlation, and portfolio classes presented no correlation. This lack of a relationship between class grade and exam score implies that students are unable to gauge their future exam performance based on class performance. Future researchers should compare data for a greater sample of students as well as regional samples.

  12. A Highly Efficient Broadband Class-E Power Amplifier with Nonlinear Shunt Capacitance

    Directory of Open Access Journals (Sweden)

    Ninh Dang-Duy

    2017-10-01

    Full Text Available A new approach to designing a broadband and highly efficient class-E power amplifier based on nonlinear shunt capacitance analysis is proposed. The nonlinear shunt capacitance method accurately extracts optimum class-E power amplifier parameters, including an external shunt capacitance and an output impedance, at different frequencies. The dependence of the former parameter on the frequency is considered to select an optimal value of external shunt capacitor. Then, upon determining the latter parameter, an output matching network is optimized to obtain the highest efficiency across the bandwidth of interest. An analytical approach is presented to design the broadband class-E power amplifier of a MOSFET transistor. The proposed method is experimentally verified by a 140–170 MHz class-E power amplifier design with maximum added power efficiency of 82% and output power of 34 dBm.

  13. The Effect of Late Registration for College Classes

    Science.gov (United States)

    Safer, Alan M.

    2009-01-01

    Objective: To assess the outcome of late registration for college classes and early class withdrawal. Method: Computerized 2007-9 school record data on 7,200 college students were analyzed to evaluate the effect of late class registration on the class grade--relative to the average class grade--and on class withdrawal. Assessed by multiple…

  14. A fully enclosed, compact standard lightning impulse generator for testing ultra-high-voltage-class gas-insulated switchgears with high capacitance

    Science.gov (United States)

    Wen, Tao; Zhang, Qiaogen; Zhang, Lingli; Zhao, Junping; Liu, Xuandong; Li, Xiaoang; Guo, Can; You, Haoyang; Chen, Weijiang; Yin, Yu; Shi, Weidong

    2016-03-01

    At present, conducting standard lightning impulse (LI) tests in the field for gas-insulated switchgear (GIS) equipment is difficult because of the high capacitance of the test equipment and large circuit inductance of traditional impulse devices, which leads to a wavefront time Tf ≥ 2.5 μs. A novel fully enclosed, compact standard LI generator for testing ultra-high-voltage-class GIS equipment with high capacitance is presented to solve the problem of Tf exceeding the standard during LI voltage tests for actual large-sized equipment. The impulse generator is installed in a metal vessel filled with SF6 or SF6/N2 gas mixture at a pressure of 0.3-0.5 MPa, providing a more compact structure and a lower series inductance. A newly developed conical voltage sensor is used to accurately measure the output voltage waveform. Two test modes (via bushing docking and direct docking) for the GIS test based on the impulse generator are introduced. Calculation results show that the impulse generator can generate an LI test waveform following the present IEC standard for the test of equipment with capacitance >10 000 pF.

  15. An approach to operational risk modeling and estimation of safety levels for deep water work class remotely operated vehicle—A case study with reference to ROSUB 6000

    Directory of Open Access Journals (Sweden)

    N. Vedachalam

    2016-04-01

    Full Text Available This paper presents a quantitative approach to operational risk modeling and estimation of safety integrity levels, required for the deep water electric work class remotely operated vehicle with reference to ROSUB6000 developed by the National Institute of Ocean Technology, India. ROSUB6000 is used for carrying out bathymetric surveys, gas hydrate surveys, poly-metallic nodule exploration, salvage operations, and meeting emergency response situations. The system is expected to be in operation for a period of 300h per year, and has to be extremely safe and reliable. Methods and models for the quantitative assessment of operational safety and estimation of safety integrity levels for ROV are seldom available in the deep water intervention industry. The safety instrumented functions implemented in the ROV should be able to meet the SIL requirements of specific mission. This study indicates that the required safety factors are implemented into the design of the state-of-the-art ROV ROSUB 6000, considering IEC 61508/61511 recommendations on Health, Safety and Environment and it is found that the system is able to meet the required SIL for seven identified functions. This paper gives the design and safety engineers in the ROV industry, an overview of the numerical operational risk assessment methods and safety-centered ROV engineering.

  16. Gait and Function in Class III Obesity

    Directory of Open Access Journals (Sweden)

    Catherine Ling

    2012-01-01

    Full Text Available Walking, more specifically gait, is an essential component of daily living. Walking is a very different activity for individuals with a Body Mass Index (BMI of 40 or more (Class III obesity compared with those who are overweight or obese with a BMI between 26–35. Yet all obesity weight classes receive the same physical activity guidelines and recommendations. This observational study examined the components of function and disability in a group with Class III obesity and a group that is overweight or has Class I obesity. Significant differences were found between the groups in the areas of gait, body size, health condition, and activity capacity and participation. The Timed Up and Go test, gait velocity, hip circumference, and stance width appear to be most predictive of activity capacity as observed during gait assessment. The findings indicate that Class III-related gait is pathologic and not a normal adaptation.

  17. MATLAB tensor classes for fast algorithm prototyping.

    Energy Technology Data Exchange (ETDEWEB)

    Bader, Brett William; Kolda, Tamara Gibson (Sandia National Laboratories, Livermore, CA)

    2004-10-01

    Tensors (also known as mutidimensional arrays or N-way arrays) are used in a variety of applications ranging from chemometrics to psychometrics. We describe four MATLAB classes for tensor manipulations that can be used for fast algorithm prototyping. The tensor class extends the functionality of MATLAB's multidimensional arrays by supporting additional operations such as tensor multiplication. The tensor as matrix class supports the 'matricization' of a tensor, i.e., the conversion of a tensor to a matrix (and vice versa), a commonly used operation in many algorithms. Two additional classes represent tensors stored in decomposed formats: cp tensor and tucker tensor. We descibe all of these classes and then demonstrate their use by showing how to implement several tensor algorithms that have appeared in the literature.

  18. The structural dynamics of social class.

    Science.gov (United States)

    Kraus, Michael W; Park, Jun Won

    2017-12-01

    Individual agency accounts of social class persist in society and even in psychological science despite clear evidence for the role of social structures. This article argues that social class is defined by the structural dynamics of society. Specifically, access to powerful networks, groups, and institutions, and inequalities in wealth and other economic resources shape proximal social environments that influence how individuals express their internal states and motivations. An account of social class that highlights the means by which structures shape and are shaped by individuals guides our understanding of how people move up or down in the social class hierarchy, and provides a framework for interpreting neuroscience studies, experimental paradigms, and approaches that attempt to intervene on social class disparities. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Social class & risk preferences and behavior.

    Science.gov (United States)

    Kish-Gephart, Jennifer J

    2017-12-01

    This paper reviews recent work regarding the link between one's societal ranking (or social class), and risk preferences and behavior. While the topic of social class and its relationship to risk has been studied only tentatively in psychology, preliminary evidence suggests that experiences with rank, access to resources, and movement between classes have a meaningful impact on people's risk preferences and behaviors. Yet, a clear pattern of results remains elusive. Some studies suggest that lower social class standing is related to risk aversion, while others suggest it is related to risk taking. These mixed results highlight the need for future research that examines when and why lower social class standing is related to more or less risky decisions. By shedding light on this important phenomenon, the hope is to offer intervention opportunities that influence policies and mitigate inequality. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Implementación Piloto de la Norma ISO/IEC 17025:2005 con base en un Sistema de Gestión de Calidad para el Laboratorio de Aguas de la Empresa Municipal Regional de Agua Potable de Arenillas y Huaquillas: EMRAPAH

    OpenAIRE

    Gadvay Yambay, Katty Alexandra

    2015-01-01

    161 hojas : ilustraciones, 29 x 21 cm + CD-ROM 6304 Resumen.- La importancia de garantizar que los resultados analíticos sean confiables en un laboratorio es de mucha responsabilidad del personal técnico. Además la validación de los métodos analíticos y la calibración del equipo son elementos importantes de la garantía de calidad de los mismos. Por tal razón el propósito de la presente investigación fue realizar una implementación piloto de la Norma ISO/IEC 17025: 2005 con base en un siste...

  1. Análisis del índice de morosidad en la cartera de créditos del iece-guayaquil y propuesta de mecanismos de prevención de morosidad y técnicas eficientes de cobranzas

    OpenAIRE

    Parrales Ramos, Carlos

    2013-01-01

    El desarrollo del trabajo está enfocado en el análisis del índice de morosidad del Instituto Ecuatoriano de Crédito Educativo y Becas de Guayaquil, para que a partir de ésta investigación se puedan generar estrategias que permitan prevenir la morosidad y establecer técnicas de cobranzas efectivas. Con corte a abril/2012, el índice de morosidad de la banca pública ecuatoriana fue de 8.22%, mientras que el del IECE-Guayaquil, fue de 12.13%. Como parte de la investigación se analizó cómo se mane...

  2. Present Yourself! By MHC Class I and MHC Class II Molecules

    NARCIS (Netherlands)

    Rock, Kenneth L.; Reits, Eric; Neefjes, Jacques

    2016-01-01

    Since the discovery of MHC molecules, it has taken 40 years to arrive at a coherent picture of how MHC class I and MHC class II molecules really work. This is a story of the proteases and MHC-like chaperones that support the MHC class I and II molecules in presenting peptides to the immune system.

  3. Self-Education, Class and Gender in Edwardian Britain: Women in Lower Middle Class Families

    Science.gov (United States)

    Sutherland, Gillian

    2015-01-01

    Once societies embarked on programmes of mass education home schooling became essentially a middle-class project and remains so. This paper looks at the educational experiences of some lower middle class women at the turn of the nineteenth and twentieth centuries for whom the resources of the middle-class home were simply not available. It…

  4. Social Class (In)Visibility and the Professional Experiences of Middle-Class Novice Teachers

    Science.gov (United States)

    Hall, David; Jones, Lisa

    2013-01-01

    This article focuses upon the classed and early professional experiences of middle-class novice teachers in England experiencing and contemplating working in schools serving socio-economically disadvantaged communities. Through an examination of the visibility and invisibility of social class in education set within an increasingly unequal and…

  5. Social class, power, and selfishness: when and why upper and lower class individuals behave unethically.

    Science.gov (United States)

    Dubois, David; Rucker, Derek D; Galinsky, Adam D

    2015-03-01

    Are the rich more unethical than the poor? To answer this question, the current research introduces a key conceptual distinction between selfish and unethical behavior. Based on this distinction, the current article offers 2 novel findings that illuminate the relationship between social class and unethical behavior. First, the effects of social class on unethical behavior are not invariant; rather, the effects of social class are moderated by whether unethical behavior benefits the self or others. Replicating past work, social class positively predicted unethical behavior; however, this relationship was only observed when that behavior was self-beneficial. When unethical behavior was performed to benefit others, social class negatively predicted unethical behavior; lower class individuals were more likely than upper class individuals to engage in unethical behavior. Overall, social class predicts people's tendency to behave selfishly, rather than predicting unethical behavior per se. Second, individuals' sense of power drove the effects of social class on unethical behavior. Evidence for this relationship was provided in three forms. First, income, but not education level, predicted unethical behavior. Second, feelings of power mediated the effect of social class on unethical behavior, but feelings of status did not. Third, two distinct manipulations of power produced the same moderation by self-versus-other beneficiary as was found with social class. The current theoretical framework and data both synthesize and help to explain a range of findings in the social class and power literatures. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  6. 78 FR 5754 - Proposed Amendment of Class D and Class E Airspace; Reading, PA

    Science.gov (United States)

    2013-01-28

    ... Class E Airspace; Reading, PA AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: This action proposes to amend Class D and Class E Airspace at Reading... Approach Procedures (SIAPs) at Reading Regional/Carl A. Spaatz Field. This action would enhance the safety...

  7. Evolution of major histocompatibility complex class I and class II genes in the brown bear

    Science.gov (United States)

    2012-01-01

    Background Major histocompatibility complex (MHC) proteins constitute an essential component of the vertebrate immune response, and are coded by the most polymorphic of the vertebrate genes. Here, we investigated sequence variation and evolution of MHC class I and class II DRB, DQA and DQB genes in the brown bear Ursus arctos to characterise the level of polymorphism, estimate the strength of positive selection acting on them, and assess the extent of gene orthology and trans-species polymorphism in Ursidae. Results We found 37 MHC class I, 16 MHC class II DRB, four DQB and two DQA alleles. We confirmed the expression of several loci: three MHC class I, two DRB, two DQB and one DQA. MHC class I also contained two clusters of non-expressed sequences. MHC class I and DRB allele frequencies differed between northern and southern populations of the Scandinavian brown bear. The rate of nonsynonymous substitutions (dN) exceeded the rate of synonymous substitutions (dS) at putative antigen binding sites of DRB and DQB loci and, marginally significantly, at MHC class I loci. Models of codon evolution supported positive selection at DRB and MHC class I loci. Both MHC class I and MHC class II sequences showed orthology to gene clusters found in the giant panda Ailuropoda melanoleuca. Conclusions Historical positive selection has acted on MHC class I, class II DRB and DQB, but not on the DQA locus. The signal of historical positive selection on the DRB locus was particularly strong, which may be a general feature of caniforms. The presence of MHC class I pseudogenes may indicate faster gene turnover in this class through the birth-and-death process. South–north population structure at MHC loci probably reflects origin of the populations from separate glacial refugia. PMID:23031405

  8. Evolution of major histocompatibility complex class I and class II genes in the brown bear

    Directory of Open Access Journals (Sweden)

    Kuduk Katarzyna

    2012-10-01

    Full Text Available Abstract Background Major histocompatibility complex (MHC proteins constitute an essential component of the vertebrate immune response, and are coded by the most polymorphic of the vertebrate genes. Here, we investigated sequence variation and evolution of MHC class I and class II DRB, DQA and DQB genes in the brown bear Ursus arctos to characterise the level of polymorphism, estimate the strength of positive selection acting on them, and assess the extent of gene orthology and trans-species polymorphism in Ursidae. Results We found 37 MHC class I, 16 MHC class II DRB, four DQB and two DQA alleles. We confirmed the expression of several loci: three MHC class I, two DRB, two DQB and one DQA. MHC class I also contained two clusters of non-expressed sequences. MHC class I and DRB allele frequencies differed between northern and southern populations of the Scandinavian brown bear. The rate of nonsynonymous substitutions (dN exceeded the rate of synonymous substitutions (dS at putative antigen binding sites of DRB and DQB loci and, marginally significantly, at MHC class I loci. Models of codon evolution supported positive selection at DRB and MHC class I loci. Both MHC class I and MHC class II sequences showed orthology to gene clusters found in the giant panda Ailuropoda melanoleuca. Conclusions Historical positive selection has acted on MHC class I, class II DRB and DQB, but not on the DQA locus. The signal of historical positive selection on the DRB locus was particularly strong, which may be a general feature of caniforms. The presence of MHC class I pseudogenes may indicate faster gene turnover in this class through the birth-and-death process. South–north population structure at MHC loci probably reflects origin of the populations from separate glacial refugia.

  9. Evolution of major histocompatibility complex class I and class II genes in the brown bear.

    Science.gov (United States)

    Kuduk, Katarzyna; Babik, Wiesław; Bojarska, Katarzyna; Sliwińska, Ewa B; Kindberg, Jonas; Taberlet, Pierre; Swenson, Jon E; Radwan, Jacek

    2012-10-02

    Major histocompatibility complex (MHC) proteins constitute an essential component of the vertebrate immune response, and are coded by the most polymorphic of the vertebrate genes. Here, we investigated sequence variation and evolution of MHC class I and class II DRB, DQA and DQB genes in the brown bear Ursus arctos to characterise the level of polymorphism, estimate the strength of positive selection acting on them, and assess the extent of gene orthology and trans-species polymorphism in Ursidae. We found 37 MHC class I, 16 MHC class II DRB, four DQB and two DQA alleles. We confirmed the expression of several loci: three MHC class I, two DRB, two DQB and one DQA. MHC class I also contained two clusters of non-expressed sequences. MHC class I and DRB allele frequencies differed between northern and southern populations of the Scandinavian brown bear. The rate of nonsynonymous substitutions (dN) exceeded the rate of synonymous substitutions (dS) at putative antigen binding sites of DRB and DQB loci and, marginally significantly, at MHC class I loci. Models of codon evolution supported positive selection at DRB and MHC class I loci. Both MHC class I and MHC class II sequences showed orthology to gene clusters found in the giant panda Ailuropoda melanoleuca. Historical positive selection has acted on MHC class I, class II DRB and DQB, but not on the DQA locus. The signal of historical positive selection on the DRB locus was particularly strong, which may be a general feature of caniforms. The presence of MHC class I pseudogenes may indicate faster gene turnover in this class through the birth-and-death process. South-north population structure at MHC loci probably reflects origin of the populations from separate glacial refugia.

  10. The Cosmology Large Angular Scale Surveyor (CLASS)

    Science.gov (United States)

    Cleary, Joseph

    2018-01-01

    The Cosmology Large Angular Scale Surveyor (CLASS) is an array of four telescopes designed to measure the polarization of the Cosmic Microwave Background. CLASS aims to detect the B-mode polarization from primordial gravitational waves predicted by cosmic inflation theory, as well as the imprint left by reionization upon the CMB E-mode polarization. This will be achieved through a combination of observing strategy and state-of-the-art instrumentation. CLASS is observing 70% of the sky to characterize the CMB at large angular scales, which will measure the entire CMB power spectrum from the reionization peak to the recombination peak. The four telescopes operate at frequencies of 38, 93, 145, and 217 GHz, in order to estimate Galactic synchrotron and dust foregrounds while avoiding atmospheric absorption. CLASS employs rapid polarization modulation to overcome atmospheric and instrumental noise. Polarization sensitive cryogenic detectors with low noise levels provide CLASS the sensitivity required to constrain the tensor-to-scalar ratio down to levels of r ~ 0.01 while also measuring the optical depth the reionization to sample-variance levels. These improved constraints on the optical depth to reionization are required to pin down the mass of neutrinos from complementary cosmological data. CLASS has completed a year of observations at 38 GHz and is in the process of deploying the rest of the telescope array. This poster provides an overview and update on the CLASS science, hardware and survey operations.

  11. Maxillary molar distalization with first class appliance.

    Science.gov (United States)

    Ramesh, Namitha; Palukunnu, Biswas; Ravindran, Nidhi; Nair, Preeti P

    2014-02-27

    Non-extraction treatment has gained popularity for corrections of mild-to-moderate class II malocclusion over the past few decades. The distalization of maxillary molars is of significant value for treatment of cases with minimal arch discrepancy and mild class II molar relation associated with a normal mandibular arch and acceptable profile. This paper describes our experience with a 16-year-old female patient who reported with irregularly placed upper front teeth and unpleasant smile. The patient was diagnosed to have angles class II malocclusion with moderate maxillary anterior crowding, deep bite of 4 mm on a skeletal class II base with an orthognathic maxilla and retrognathic mandible and normal growth pattern. She presented an ideal profile and so molar distalization was planned with the first-class appliance. Molars were distalised by 8 mm on the right and left quadrants and class I molar relation achieved within 4 months. The space gained was utilised effectively to align the arch and establish a class I molar and canine relation.

  12. How social-class stereotypes maintain inequality.

    Science.gov (United States)

    Durante, Federica; Fiske, Susan T

    2017-12-01

    Social class stereotypes support inequality through various routes: ambivalent content, early appearance in children, achievement consequences, institutionalization in education, appearance in cross-class social encounters, and prevalence in the most unequal societies. Class-stereotype content is ambivalent, describing lower-SES people both negatively (less competent, less human, more objectified), and sometimes positively, perhaps warmer than upper-SES people. Children acquire the wealth aspects of class stereotypes early, which become more nuanced with development. In school, class stereotypes advantage higher-SES students, and educational contexts institutionalize social-class distinctions. Beyond school, well-intentioned face-to-face encounters ironically draw on stereotypes to reinforce the alleged competence of higher-status people and sometimes the alleged warmth of lower-status people. Countries with more inequality show more of these ambivalent stereotypes of both lower-SES and higher-SES people. At a variety of levels and life stages, social-class stereotypes reinforce inequality, but constructive contact can undermine them; future efforts need to address high-status privilege and to query more heterogeneous samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. MHC class I and II deficiencies.

    Science.gov (United States)

    Hanna, Suheir; Etzioni, Amos

    2014-08-01

    Deficiencies of MHC complex class I or II are rare primary immunodeficiencies, both of which are inherited in an autosomal recessive pattern. MHC class II deficiency is a prototype of a disease of gene regulation. Defects in transacting regulatory factors required for expression of MHC class II genes, rather than the genes themselves, are responsible for the disease phenotype. The affected genes are known to encode 4 distinct regulatory factors controlling transcription of MHC class II genes. These transacting factors are the class II transactivator and 3 subunits of regulatory factor X (RFX): RFX containing ankyrin repeats (RFXANK), the fifth member of the RFX family (RFX5), and RFX-associated protein (RFXAP). Mutations in one of each define 4 distinct complementation groups termed A, B, C, and D, respectively. MHC class I deficiency is extremely rare and has been reported in less than 30 patients worldwide. Here we review the clinical, genetic, and molecular features that characterize these primary immunodeficiencies and discuss therapy options. Beyond the description of MHC class I and II deficiencies, their discovery has fascinated scientists and clinicians because of their ability to reveal the molecular basis of MCH regulation. Copyright © 2014 American Academy of Allergy, Asthma & Immunology. Published by Mosby, Inc. All rights reserved.

  14. Early cephalometric characteristics in Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Vanessa Costa Farias

    2012-04-01

    Full Text Available OBJECTIVE: Early identification of craniofacial morphological characteristics allows orthopedic segmented interventions to attenuate dentoskeletal discrepancies, which may be partially disguised by natural dental compensation. To investigate the morphological characteristics of Brazilian children with Class III malocclusion, in stages I and II of cervical vertebrae maturation and compare them with the characteristics of Class I control patients. METHODS: Pre-orthodontic treatment records of 20 patients with Class III malocclusion and 20 control Class I patients, matched by the same skeletal maturity index and sex, were selected. The craniofacial structures and their relationships were divided into different categories for analysis. Angular and linear measures were adopted from the analyses previously described by Downs, Jarabak, Jacobson and McNamara. The differences found between the groups of Class III patients and Class I control group, both subdivided according to the stage of cervical vertebrae maturation (I or II, were assessed by analysis of variance (ANOVA, complemented by Bonferroni's multiple mean comparisons test. RESULTS: The analysis of variance showed statistically significant differences in the different studied groups, between the mean values found for some angular (SNA, SNB, ANB and linear variables (Co - Gn, N - Perp Pog, Go - Me, Wits, S - Go, Ar - Go. CONCLUSION: Assessed children displaying Class III malocclusion show normal anterior base of skull and maxilla, and anterior positioning of the mandible partially related to increased posterior facial height with consequent mandibular counterclockwise rotation.

  15. Timely management of developing class III malocclusion

    Directory of Open Access Journals (Sweden)

    M R Yelampalli

    2012-01-01

    Full Text Available Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the jaw bases and may result in severe facial deformities. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. This paper deals with the selection of an appropriate appliance from the various current options available for early intervention in developing class III malocclusion through two case reports.

  16. Timely management of developing class III malocclusion.

    Science.gov (United States)

    Yelampalli, M R; Rachala, M R

    2012-01-01

    Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the jaw bases and may result in severe facial deformities. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. This paper deals with the selection of an appropriate appliance from the various current options available for early intervention in developing class III malocclusion through two case reports.

  17. Early failure of Class II resin composite versus Class II amalgam restorations placed by dental students.

    Science.gov (United States)

    Overton, J D; Sullivan, Diane J

    2012-03-01

    Using the information from remake request slips in a dental school's predoctoral clinic, we examined the short-term survival of Class II resin composite restorations versus Class II dental amalgam restorations. In the student clinic, resin composite is used in approximately 58 percent of Class II restorations placed, and dental amalgam is used in the remaining 42 percent. In the period examined, Class II resin composite restorations were ten times more likely to be replaced at no cost to the patient than Class II dental amalgam restorations. A total of eighty-four resin composite restorations and six amalgam restorations were replaced due to an identified failure.

  18. Present Yourself! By MHC Class I and MHC Class II Molecules

    Science.gov (United States)

    Rock, Kenneth L.; Reits, Eric; Neefjes, Jacques

    2016-01-01

    Since the discovery of major histocompatibility complex (MHC) molecules, it took some 40 years to arrive at a coherent picture of how MHC class I and MHC class II molecules really work. This is a story of proteases and MHC-like chaperones that support the MHC class I and II molecules in presenting peptides to the immune system. We now understand that the MHC system shapes both the repertoire of presented peptides and the subsequent T cell responses, with important implications ranging from transplant rejection to tumor immunotherapies. Here we present an illustrated review on the ins and outs of MHC class I and MHC class II antigen presentation. PMID:27614798

  19. Sartorial symbols of social class elicit class-consistent behavioral and physiological responses: a dyadic approach.

    Science.gov (United States)

    Kraus, Michael W; Mendes, Wendy Berry

    2014-12-01

    Social rank in human and nonhuman animals is signaled by a variety of behaviors and phenotypes. In this research, we examined whether a sartorial manipulation of social class would engender class-consistent behavior and physiology during dyadic interactions. Male participants donned clothing that signaled either upper-class (business-suit) or lower-class (sweatpants) rank prior to engaging in a modified negotiation task with another participant unaware of the clothing manipulation. Wearing upper-class, compared to lower-class, clothing induced dominance--measured in terms of negotiation profits and concessions, and testosterone levels--in participants. Upper-class clothing also elicited increased vigilance in perceivers of these symbols: Relative to perceiving lower-class symbols, perceiving upper-class symbols increased vagal withdrawal, reduced perceptions of social power, and catalyzed physiological contagion such that perceivers' sympathetic nervous system activation followed that of the upper-class target. Discussion focuses on the dyadic process of social class signaling within social interactions. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  20. Social affiliation in same-class and cross-class interactions.

    Science.gov (United States)

    Côté, Stéphane; Kraus, Michael W; Carpenter, Nichelle C; Piff, Paul K; Beermann, Ursula; Keltner, Dacher

    2017-02-01

    Historically high levels of economic inequality likely have important consequences for relationships between people of the same and different social class backgrounds. Here, we test the prediction that social affiliation among same-class partners is stronger at the extremes of the class spectrum, given that these groups are highly distinctive and most separated from others by institutional and economic forces. An internal meta-analysis of 4 studies (N = 723) provided support for this hypothesis. Participant and partner social class were interactively, rather than additively, associated with social affiliation, indexed by affiliative behaviors and emotions during structured laboratory interactions and in daily life. Further, response surface analyses revealed that paired upper or lower class partners generally affiliated more than average-class pairs. Analyses with separate class indices suggested that these patterns are driven more by parental income and subjective social class than by parental education. The findings illuminate the dynamics of same- and cross-class interactions, revealing that not all same-class interactions feature the same degree of affiliation. They also reveal the importance of studying social class from an intergroup perspective. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  1. Considerations when using videos in lamaze classes.

    Science.gov (United States)

    Hotelling, Barbara A

    2012-01-01

    There are enough worthwhile videos available today so that a Lamaze Certified Childbirth Educator could literally teach an entire class series using only videos and feedback discussion. In this column, the author explores considerations in choosing videos for adult learners in Lamaze birth classes. Some things to consider when using videos should be the adult learner's attention span, whether the video increases fear of birth or empowers the learner, and if the video is appropriate for the culture of the class participants. Finally, the author provides a list of some of the many wonderful videos available to Lamaze birth educators.

  2. Marking the Moral Boundaries of Class

    OpenAIRE

    John Kirk

    2006-01-01

    This article welcomes the recent renewed interest in the topic of class within sociology and cultural studies. This comes after a long period – from around the middle part of the 1980s and into the 1990s – during which social class was dismissed as a mode of understanding socio-economic and cultural conditions on the part of both academics and mainstream political organisations alike. Working-class formations in particular came under scrutiny, increasingly seen to be in terminal decline a...

  3. VIRTUAL CLASS FOR STUDENTS’ INDIVIDUAL TRAINING ORGANIZATION

    Directory of Open Access Journals (Sweden)

    S. Lytvynova

    2011-11-01

    Full Text Available In the article the problem of modernization of individual studies of students rises by modern facilities of computer-reference educational environment. The criteria of determination of level of ІКТ-компетентності of teachers-предметників which work with a virtual class are given, the model of integration of virtual class is described in an educational-educate process. Research of virtual class is in-process presented as a computer-reference educational environment.

  4. Class, race, and social mobility in Brazil

    Directory of Open Access Journals (Sweden)

    Carlos Antonio Costa Ribeiro

    2007-01-01

    Full Text Available This article analyzes the differences in inter-generational social mobility and schooling between white, brown, and black men in Brazil. The main objective is to analyze inequality of opportunities for mobility and educational transitions. The results indicate that for individuals from lower social origins, inequality of opportunities is significantly marked by racial differences, and that for persons originating in the upper classes, racial inequality influences the odds of social mobility. The results suggest that theories of stratification by race and class in Brazil should be rethought, taking into account the observed interactions between race and class.

  5. The State of the Australian Middle Class

    Directory of Open Access Journals (Sweden)

    Clive Hamilton

    2008-09-01

    Full Text Available There is a widespread view that the middle class in Australia is doing it tough, that they arefinding it increasingly difficult to maintain a decent standard of living and are suffering frommortgage stress. Indeed, some media reports have announced the end of the middle classdream.This paper tests a number of these popular views against the statistical data. It asks whetherthe typical Australian family can be said to be struggling? Are mortgages creating severeproblems for middle-class families? Is the middle class shrinking? Are families copingfinancially only because wives are going out to work?

  6. Aeroflex Technology as Class-Y Demonstrator

    Science.gov (United States)

    Suh, Jong-ook; Agarwal, Shri; Popelar, Scott

    2014-01-01

    Modern space field programmable gate array (FPGA) devices with increased functional density and operational frequency, such as Xilinx Virtex 4 (V4) and S (V5), are packaged in non-hermetic ceramic flip chip forms. These next generation space parts were not qualified to the MIL-PRF-38535 Qualified Manufacturer Listing (QML) class-V when they were released because class-V was only intended for hermetic parts. In order to bring Xilinx V5 type packages into the QML system, it was suggested that class-Y be set up as a new category. From 2010 through 2014, a JEDEC G12 task group developed screening and qualification requirements for Class-Y products. The Document Standardization Division of the Defense Logistics Agency (DLA) has completed an engineering practice study. In parallel with the class-Y efforts, the NASA Electronic Parts and Packaging (NEPP) program has funded JPL to study potential reliability issues of the class-Y products. The major hurdle of this task was the absence of adequate research samples. Figure 1-1 shows schematic diagrams of typical structures of class-Y type products. Typically, class-Y products are either in ceramic flip chip column grid array (CGA) or land grid array (LGA) form. In class-Y packages, underfill and heat spread adhesive materials are directly exposed to the spacecraft environment due to their non-hermeticity. One of the concerns originally raised was that the underfill material could degrade due to the spacecraft environment and negatively impact the reliability of the package. In order to study such issues, it was necessary to use ceramic daisy chain flip chip package samples so that continuity of flip chip solder bumps could be monitored during the reliability tests. However, none of the commercially available class-Y daisy chain parts had electrical connections through flip chip solder bumps; only solder columns were daisy chained, which made it impossible to test continuity of flip chip solder bumps without using extremely

  7. Windy Mars: A Dynamic Planet as Seen by the HiRISE Camera

    Science.gov (United States)

    Bridges, N. T.; Geissler, P. E.; McEwen, A. S.; Thomson, B. J.; Chuang, F. C.; Herkenhoff, K. E.; Keszthelyi, L. P.; Martnez-Alonso, S.

    2007-01-01

    With a dynamic atmosphere and a large supply of particulate material, the surface of Mars is heavily influenced by wind-driven, or aeolian, processes. The High Resolution Imaging Science Experiment (HiRISE) camera on the Mars Reconnaissance Orbiter (MRO) provides a new view of Martian geology, with the ability to see decimeter-size features. Current sand movement, and evidence for recent bedform development, is observed. Dunes and ripples generally exhibit complex surfaces down to the limits of resolution. Yardangs have diverse textures, with some being massive at HiRISE scale, others having horizontal and cross-cutting layers of variable character, and some exhibiting blocky and polygonal morphologies. 'Reticulate' (fine polygonal texture) bedforms are ubiquitous in the thick mantle at the highest elevations.

  8. Bottom shear stress and salinity distribution in a windy Mediterranean lagoon

    Science.gov (United States)

    Alekseenko, Elena; Roux, Bernard; Kuznetsov, Konstantin

    2017-04-01

    This work concerns the wind influence on bottom shear stress and salinity levels in a Mediterranean semi-enclosed coastal lagoon (Etang de Berre), with respect to a replanting program of Zostera noltii. The MARS3D numerical model is used to analyze the 3D current, salinity and temperature distribution induced by three meteorological, oceanic and anthropogenic forcings in this lagoon. The numerical model has been carefully validated by comparison with daily observations of the vertical salinity and temperature profiles at three mooring stations, for one year. Then, two modelling scenarios are considered. The first scenario (scen.#1), starting with an homogeneous salinity of S=20 PSU and without wind forcing, studies a stratification process under the influence of a periodic seawater inflow and a strong freshwater inflow from an hydropower plant (250 m3/s). Then, in the second scenario (scen.#2), we study how a strong wind of 80 km/h can mix the haline stratification obtained at the end of scen.#1. The most interesting results concern four nearshore replanting areas ; two are situated on the eastern side of EB and two on the western side. The results of scen.#2 show that all these areas are subject to a downwind coastal jet. Concerning bottom salinity, the destratification process is very beneficial; it always remains greater than 12 PSU for a N-NW wind of 80 km/h and a hydropower runoff of 250 m3/s. Special attention is devoted to the bottom shear stress (BSS) for different values of the bottom roughness parameter (for gravels, sands and silts), and to the bottom salinity. BSS presents a maximum near the shoreline and decreases along transects perpendicular to the shoreline. There exists a zone, parallel to the shoreline, where BSS presents a minimum (close to zero). When comparing the BSS value at the four replanting areas with the critical value, BSScr, at which the sediment mobility would occur, we see that for the smaller roughness values (ranging from z0=3.5 e-4 mm, to 3.5 e-2 mm) BSS largely surpasses this critical value. For a N-NW wind speed of 40 km/h (which is blowing for around 100 days per year), BSS still largely surpasses BSScr - at least for the silt sediments (ranging from z0=3.5 e-4 mm, to 3.5 e-3 mm). This confirms the possibility that the coastal jet could generate sediment mobility which could have a negative impact for SAV replanting. Acknowledgements We acknowledge financial supports by the French Water Agency (Agence de l'Eau-RMC - convention N 2010-0042) and by the Regional Council (Conseil Regional Provence-Alpes-Cote d'Azur): Projet HYDROSYS - Subvention N2008-11944CA and the French Ministry of Foreign Affairs (ARCUS-Russia program). We also acknowledge PhD grants received from the French Ministry of Higher Education and Research (Direction des Relations Europeennes et Internationales et de la Cooperation: reseau formation-recherche Franco-Russe). Part of this research is also a contribution to the grant of Russian Foundation for Basic Research (RFBR) N16-35-00526.

  9. 78 FR 60273 - Granby Pumping Plant Switchyard-Windy Gap Substation Transmission Line Rebuild, Grand County...

    Science.gov (United States)

    2013-10-01

    ... marketing administration in the U.S. Department of Energy (DOE), owns and operates the 69-kilovolt (kV... the project. No new sources of power would be needed for the project. The resource mix would not be...

  10. Investigation of wind speed cooling effect on PV panels in windy locations

    DEFF Research Database (Denmark)

    Gökmen, Nuri; Hu, Weihao; Hou, Peng

    2016-01-01

    Environmental concerns have considerably increased the penetration of renewable energy sources in the electricity grid. Especially, the quick rise of photovoltaic (PV) installations aroused more research interests in efficiency improvement during the recent years. Even one percent more gain is of...

  11. Evaluating the Coda Phase Delay Method for Determining Temperature Ratios in Windy Environments

    Energy Technology Data Exchange (ETDEWEB)

    Albert, Sarah [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bowman, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodgers, Arthur [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Seastrand, Douglas [National Security Technologies, LLC. (NSTec), Las Vegas, NV (United States)

    2017-07-01

    We evaluate the acoustic coda phase delay method for estimating changes in atmospheric phenomena in realistic environments. Previous studies verifying the method took place in an environment with negligible wind. The equation for effective sound speed, which the method is based upon, shows that the influence of wind is equal to the square of temperature. Under normal conditions, wind is significant and therefore cannot be ignored. Results from this study con rm the previous statement. The acoustic coda phase delay method breaks down in non-ideal environments, namely those where wind speed and direction varies across small distances. We suggest that future studies make use of gradiometry to better understand the effect of wind on the acoustic coda and subsequent phase delays.

  12. Flight Load Assessment for Light Aircraft Landing Trajectories in Windy Atmosphere and Near Wind Farms

    Directory of Open Access Journals (Sweden)

    Carmine Varriale

    2018-04-01

    Full Text Available This work focuses on the wake encounter problem occurring when a light, or very light, aircraft flies through or nearby a wind turbine wake. The dependency of the aircraft normal load factor on the distance from the turbine rotor in various flight and environmental conditions is quantified. For this research, a framework of software applications has been developed for generating and controlling a population of flight simulation scenarios in presence of assigned wind and turbulence fields. The JSBSim flight dynamics model makes use of several autopilot systems for simulating a realistic pilot behavior during navigation. The wind distribution, calculated with OpenFOAM, is a separate input for the dynamic model and is considered frozen during each flight simulation. The aircraft normal load factor during wake encounters is monitored at different distances from the rotor, aircraft speeds, rates of descent and crossing angles. Based on these figures, some preliminary guidelines and recommendations on safe encounter distances are provided for general aviation aircraft, with considerations on pilot comfort and flight safety. These are needed, for instance, when an accident risk assessment study is required for flight in proximity of aeolic parks. A link to the GitHub code repository is provided.

  13. Quantitative and creative design tools for urban design in cold and windy climates

    DEFF Research Database (Denmark)

    Koss, Holger; Jensen, Lotte Bjerregaard; Nielsen, Thomas Alexander Sick

    2014-01-01

    , the Technical University of Denmark has had an initiative to combine the University’s existing knowledge, relevant for large scale physical planning, in new ways. Technical-scientific knowledge about traffic and transportation, water-management, snow drift, wind engineering, sun and daylight have prospered...... between the design processes and the academic knowledge available is a focus area. The effects of climate change and a general higher demand for quantitative assessment of urban planning proposals in hard climatic locations have created a demand for research based design advice. The paper will present...

  14. Warm, windy winters drive cod north and homing of spawners keeps them there

    DEFF Research Database (Denmark)

    Rindorf, Anna; Lewy, Peter

    2006-01-01

    , stock size or limited directional movement of cod. Using the derived models, we investigated whether fishing has increased the sensitivity of the cod population to climate-induced distribution changes. 3. A series of winters characterized by high temperatures and southerly winds during the egg...... of older age groups. Unless a series of cold and calm years combined with a reduced mortality in the southern areas allows a southern spawning population to rebuild, the cod stock is unlikely to return to its previous area of distribution. Furthermore, protecting adult cod mainly in northern areas...

  15. Control of bridge cranes with distributed-mass payloads under windy conditions

    Science.gov (United States)

    Tang, Rui; Huang, Jie

    2016-05-01

    Operating cranes is challenging because payloads experience large and dangerous oscillations, especially when the system is suffering from wind disturbances and the large-size payload is modeled as a distributed-mass model. The payload oscillations induced by both intentional motions commanded by the human operator and by the external wind disturbances make the dynamics more complicated. This paper presents a novel combined control architecture to limit oscillations of the distributed-mass payload caused by both human-operator commands and wind disturbances. While a smoothed command suppressed operator-induced oscillations, a wind-rejection command eliminated the payload swing resulting from the wind gusts. Through simulations, a large range of system parameters and motions are analyzed to investigate the dynamic behavior of bridge cranes with distributed-mass beams and wind disturbances by using the new control scheme. Experimental results obtained from a small-scale bridge crane validate the simulated dynamic behavior and the effectiveness of the proposed method.

  16. Class and ideological orientations revisited: an exploration of class-based mechanisms.

    Science.gov (United States)

    Bengtsson, Mattias; Berglund, Tomas; Oskarson, Maria

    2013-12-01

    Studies of the relationship between class position and political outlooks still only have a limited understanding of the class-related mechanisms that matter for ideological orientations. This article presents a comprehensive analysis of the mechanisms that link class position and left/right and authoritarian/libertarian orientations. Besides main factors such as income, career prospects, job security, education, class origin and class identification, the significance of work-related factors such as work autonomy, working in a team, a physically demanding job and a mentally demanding job is studied. The findings are based on a survey specifically designed for this purpose and collected in Sweden in 2008/2009. A great deal of the association between class position and left/right orientations is explained by socio-economic conditions; different classes sympathize with policies that will benefit them economically. Another important factor is class identification. Work-related factors also have relevance, but the effect of class position on left/right orientations works mainly through the remuneration system. Class position is also related to authoritarian/libertarian orientations. However, this relationship is less explained by socio-economic position per se, but is rather an effect of the educational system and its allocation of the workforce into different class positions. It also turns out that work-related factors do not explain the class effects; however, a physically demanding job shows a unique effect. Overall, our findings suggest that besides factors such as class position, income, education and class identification, we need to consider work-related aspects to derive a more complete understanding of the distribution of ideological orientations in Western societies. © London School of Economics and Political Science 2013.

  17. Certain Admissible Classes of Multivalent Functions

    Directory of Open Access Journals (Sweden)

    M. K. Aouf

    2014-01-01

    Full Text Available We investigate some applications of the differential subordination and the differential superordination of certain admissible classes of multivalent functions in the open unit disk U. Several differential sandwich-type results are also obtained.

  18. Combination Classes and "Hora de comunicacion."

    Science.gov (United States)

    Eldredge, Dee L.

    1989-01-01

    Ways to combine small classes of higher education students studying Spanish at various levels are described, including judicious use of language laboratories, staggering of the different level groups, and rotation of activities geared toward students' individual proficiency levels. (CB)

  19. On nilpotent groups and conjugacy classes

    OpenAIRE

    Adan-Bante, Edith

    2005-01-01

    Let $G$ be a nilpotent group and $a\\in G$. Let $a^G=\\{g^{-1}ag\\mid g\\in G\\}$ be the conjugacy class of $a$ in $G$. Assume that $a^G$ and $b^G$ are conjugacy classes of $G$ with the property that $|a^G|=|b^G|=p$, where $p$ is an odd prime number. Set $a^G b^G=\\{xy\\mid x\\in a^G, y\\in b^G\\}$. Then either $a^G b^G=(ab)^G$ or $a^G b^G$ is the union of at least $\\frac{p+1}{2}$ distinct conjugacy classes. As an application of the previous result, given any nilpotent group $G$ and any conjugacy class...

  20. Class, Social Suffering, and Health Consumerism.

    Science.gov (United States)

    Merrild, Camilla Hoffmann; Risør, Mette Bech; Vedsted, Peter; Andersen, Rikke Sand

    2016-01-01

    In recent years an extensive social gradient in cancer outcome has attracted much attention, with late diagnosis proposed as one important reason for this. Whereas earlier research has investigated health care seeking among cancer patients, these social differences may be better understood by looking at health care seeking practices among people who are not diagnosed with cancer. Drawing on long-term ethnographic fieldwork among two different social classes in Denmark, our aim in this article is to explore the relevance of class to health care seeking practices and illness concerns. In the higher middle class, we predominantly encountered health care seeking resembling notions of health consumerism, practices sanctioned and encouraged by the health care system. However, among people in the lower working class, health care seeking was often shaped by the inseparability of physical, political, and social dimensions of discomfort, making these practices difficult for the health care system to accommodate.