WorldWideScience

Sample records for wind ram pressure

  1. The Effects of Ram-pressure Stripping and Supernova Winds on the Tidal Stirring of Disky Dwarfs: Enhanced Transformation into Dwarf Spheroidals

    Energy Technology Data Exchange (ETDEWEB)

    Kazantzidis, Stelios [Section of Astrophysics, Astronomy and Mechanics, Department of Physics, National and Kapodistrian University of Athens, 15784 Zografos, Athens (Greece); Mayer, Lucio [Center for Theoretical Astrophysics and Cosmology, Institute for Computational Science, University of Zürich, CH-8057 Zürich (Switzerland); Callegari, Simone [Anthropology Institute and Museum, University of Zürich, CH-8057 Zürich (Switzerland); Dotti, Massimo [Università degli Studi di Milano-Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Moustakas, Leonidas A., E-mail: skazantzidis@phys.uoa.gr [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2017-02-10

    A conclusive model for the formation of dwarf spheroidal (dSph) galaxies still remains elusive. Owing to their proximity to the massive spirals Milky Way (MW) and M31, various environmental processes have been invoked to explain their origin. In this context, the tidal stirring model postulates that interactions with MW-sized hosts can transform rotationally supported dwarfs, resembling present-day dwarf irregular (dIrr) galaxies, into systems with the kinematic and structural properties of dSphs. Using N -body+SPH simulations, we investigate the dependence of this transformation mechanism on the gas fraction, f {sub gas}, in the disk of the progenitor dwarf. Our numerical experiments incorporate for the first time the combined effects of radiative cooling, ram-pressure stripping, star formation, supernova (SN) winds, and a cosmic UV background. For a given orbit inside the primary galaxy, rotationally supported dwarfs with gas fractions akin to those of observed dIrrs ( f {sub gas} ≳ 0.5), demonstrate a substantially enhanced likelihood and efficiency of transformation into dSphs relative to their collisionless ( f {sub gas} = 0) counterparts. We argue that the combination of ram-pressure stripping and SN winds causes the gas-rich dwarfs to respond more impulsively to tides, augmenting their transformation. When f {sub gas} ≳ 0.5, disky dwarfs on previously unfavorable low-eccentricity or large-pericenter orbits are still able to transform. On the widest orbits, the transformation is incomplete; the dwarfs retain significant rotational support, a relatively flat shape, and some gas, naturally resembling transition-type systems. We conclude that tidal stirring constitutes a prevalent evolutionary mechanism for shaping the structure of dwarf galaxies within the currently favored CDM cosmological paradigm.

  2. Windsock memory COnditioned RAM (CO-RAM) pressure effect: Forced reconnection in the Earth's magnetotail

    Science.gov (United States)

    Vörös, Z.; Facskó, G.; Khodachenko, M.; Honkonen, I.; Janhunen, P.; Palmroth, M.

    2014-08-01

    Magnetic reconnection (MR) is a key physical concept explaining the addition of magnetic flux to the magnetotail and closed flux lines back-motion to the dayside magnetosphere. This scenario elaborated by Dungey (1963) can explain many aspects of solar wind-magnetosphere interaction processes, including substorms. However, neither the Dungey model nor its numerous modifications were able to explain fully the onset conditions for MR in the tail. In this paper, we introduce new onset conditions for forced MR in the tail. We call our scenario the "windsock memory conditioned ram pressure effect." Our nonflux transfer-associated forcing is introduced by a combination of the large-scale windsock motions exhibiting memory effects and solar wind dynamic pressure actions on the nightside magnetopause during northward oriented interplanetary magnetic field (IMF). Using global MHD Grand Unified Magnetosphere Ionosphere Coupling Simulation version 4 simulation results, upstream data from Wind, magnetosheath data from Cluster 1 and distant tail data from the two-probe Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun mission, we show that the simultaneous occurrence of vertical windsock motions of the magnetotail and enhanced solar wind dynamic pressure introduces strong nightside disturbances, including enhanced electric fields and persistent vertical cross-tail shear flows. These perturbations, associated with a stream interaction region in the solar wind, drive MR in the tail during episodes of northward oriented interplanetary magnetic field (IMF). We detect MR indirectly, observing plasmoids in the tail and ground-based signatures of earthward moving fast flows. We also consider the application to solar system planets and close-in exoplanets, where the proposed scenario can elucidate some new aspects of solar/stellar wind-magnetosphere interactions.

  3. Investigation of Rapid Pressurization Techniques for the Ram Accelerator

    National Research Council Canada - National Science Library

    Bruckner, Adam

    2003-01-01

    ... and formed a good pressure seal. Live-fire ram accelerator experiments showed that projectiles with magnesium nose tips can readily penetrate the thick-walled polycarbonate diaphragms without any impact...

  4. MHD simulations of ram pressure stripping of a disc galaxy

    Science.gov (United States)

    Ramos-Martínez, Mariana; Gómez, Gilberto C.; Pérez-Villegas, Ángeles

    2018-05-01

    The removal of the interstellar medium (ISM) of disc galaxies through ram pressure stripping (RPS) has been extensively studied in numerous simulations. Nevertheless, the role of magnetic fields (MFs) on the gas dynamics in this process has been hardly studied, although the MF influence on the large-scale disc structure is well established. With this in mind, we present a 3D magnetohydrodynamic simulation of face-on RPS of a disc galaxy to study the impact of the galactic MF in the gas stripping. The main effect of including a galactic MF is a flared disc. When the intracluster medium wind hits this flared disc, oblique shocks are produced at the interaction interface, where the ISM is compressed, generating a gas inflow from large radii towards the central regions of the galaxy. This inflow is observed for {˜ } 150 {Myr} and may supply the central parts of the galaxy with material for star formation while the outskirts of the disc are being stripped of gas, thus the oblique shocks can induce and enhance the star formation in the remaining disc. We also observed that the MF alters the shape and structure of the swept gas, giving a smooth appearance in the magnetized case and clumpier and filamentary-like morphology in the hydro case. Finally, we estimated the truncation radius expected for our models using the Gunn-Gott criterion and found that that is in agreement with the simulations.

  5. Forecasting wind power production from a wind farm using the RAMS model

    DEFF Research Database (Denmark)

    Tiriolo, L.; Torcasio, R. C.; Montesanti, S.

    2015-01-01

    The importance of wind power forecast is commonly recognized because it represents a useful tool for grid integration and facilitates the energy trading. This work considers an example of power forecast for a wind farm in the Apennines in Central Italy. The orography around the site is complex...... and the horizontal resolution of the wind forecast has an important role. To explore this point we compared the performance of two 48 h wind power forecasts using the winds predicted by the Regional Atmospheric Modeling System (RAMS) for the year 2011. The two forecasts differ only for the horizontal resolution...... of the ECMWF Integrated Forecasting System (IFS), whose horizontal resolution over Central Italy is about 25 km at the time considered in this paper. Because wind observations were not available for the site, the power curve for the whole wind farm was derived from the ECMWF wind operational analyses available...

  6. Ram-pressure feeding of supermassive black holes.

    Science.gov (United States)

    Poggianti, Bianca M; Jaffé, Yara L; Moretti, Alessia; Gullieuszik, Marco; Radovich, Mario; Tonnesen, Stephanie; Fritz, Jacopo; Bettoni, Daniela; Vulcani, Benedetta; Fasano, Giovanni; Bellhouse, Callum; Hau, George; Omizzolo, Alessandro

    2017-08-16

    When a supermassive black hole at the centre of a galaxy accretes matter, it gives rise to a highly energetic phenomenon: an active galactic nucleus. Numerous physical processes have been proposed to account for the funnelling of gas towards the galactic centre to feed the black hole. There are also several physical processes that can remove gas from a galaxy, one of which is ram-pressure stripping by the hot gas that fills the space between galaxies in galaxy clusters. Here we report that six out of a sample of seven 'jellyfish' galaxies-galaxies with long 'tentacles' of material that extend for dozens of kiloparsecs beyond the galactic disks-host an active nucleus, and two of them also have galactic-scale ionization cones. The high incidence of nuclear activity among heavily stripped jellyfish galaxies may be due to ram pressure causing gas to flow towards the centre and triggering the activity, or to an enhancement of the stripping caused by energy injection from the active nucleus, or both. Our analysis of the galactic position and velocity relative to the cluster strongly supports the first hypothesis, and puts forward ram pressure as another possible mechanism for feeding the central supermassive black hole with gas.

  7. The Effects of Ram Pressure on the Cold Clouds in the Centers of Galaxy Clusters

    Science.gov (United States)

    Li, Yuan; Ruszkowski, Mateusz; Tremblay, Grant

    2018-02-01

    We discuss the effect of ram pressure on the cold clouds in the centers of cool-core galaxy clusters, and in particular, how it reduces cloud velocity and sometimes causes an offset between the cold gas and young stars. The velocities of the molecular gas in both observations and our simulations fall in the range of 100–400 km s‑1, which is much lower than expected if they fall from a few tens of kiloparsecs ballistically. If the intracluster medium (ICM) is at rest, the ram pressure of the ICM only slightly reduces the velocity of the clouds. When we assume that the clouds are actually “fluffier” because they are co-moving with a warm-hot layer, the velocity becomes smaller. If we also consider the active galactic nucleus wind in the cluster center by adding a wind profile measured from the simulation, the clouds are further slowed down at small radii, and the resulting velocities are in general agreement with the observations and simulations. Because ram pressure only affects gas but not stars, it can cause a separation between a filament and young stars that formed in the filament as they move through the ICM together. This separation has been observed in Perseus and also exists in our simulations. We show that the star-filament offset, combined with line-of-sight velocity measurements, can help determine the true motion of the cold gas, and thus distinguish between inflows and outflows.

  8. Ram pressure effects in the galactic plane and galactic dynamos in the no-z approximation

    Science.gov (United States)

    Moss, D.; Sokoloff, D.; Beck, R.

    2012-08-01

    Context. The magnetic field of galaxies is believed to be produced by internal dynamo action, but can be affected by motion of the galaxy through the surrounding medium. Observations of polarized radio emission of galaxies located in galaxy clusters have revealed noticeable features of large-scale magnetic configurations, including displacements of the magnetic structures from the optical images and tails, which are possible imprints of ram pressure effects arising from motion of the galaxies through the intracluster medium. Aims: We present a quantitative dynamo model, which attempts to describe the above effects. In contrast, to the traditional problem of a wind affecting a body with a prescribed magnetic field, we investigate how a non-magnetized wind flow affects a magnetic field that is being self-excited by galactic dynamo action. Methods: To isolate the leading physical effects, we exploit a simple dynamo model that can describe relevant effects. In particular, we use what is known as the "no-z" approximation for the mean-field dynamo equations. Results: In a suitable parametric range we obtain displacements of the large-scale magnetic field, as well as magnetic tails. However, the specific details of their locations are quite counterintuitive. The direction of displacement is perpendicular to, rather than parallel to, the wind direction. The point at which the tail emerges from the galaxy depends on details of the model. The tail is eventually directed downstream. In the simplest case the magnetic tail begins in the region where the wind decreases the total gas velocity. Any wind that penetrates the galaxy modifies the intrinsic dynamo action. These features are different from those found in ram-pressure models. Conclusions: Any determination of galactic motion through the cluster medium from observational data needs to take the effects of dynamo action into account.

  9. Impact of magnetic fields on ram pressure stripping in disk galaxies

    Energy Technology Data Exchange (ETDEWEB)

    Ruszkowski, M. [Department of Astronomy, University of Michigan, 500 Church Street, Ann Arbor, MI 48109 (United States); Brüggen, M. [Hamburger Sternwarte, Gojenbergsweg 112, D-21029 Hamburg (Germany); Lee, D. [The Flash Center for Computational Science, The University of Chicago, 5747 South Ellis, Chicago, IL 60637 (United States); Shin, M.-S., E-mail: mateuszr@umich.edu [Department of Physics, University of Oxford, Denys Wilkinson Building, Keble Road, Oxford OX1 3RH (United Kingdom)

    2014-03-20

    Ram pressure stripping can remove significant amounts of gas from galaxies in clusters and massive groups and thus has a large impact on the evolution of cluster galaxies. Recent observations have shown that key properties of ram-pressure-stripped tails of galaxies, such as their width and structure, are in conflict with predictions by simulations. To increase the realism of existing simulations, we simulated for the first time a disk galaxy exposed to a uniformly magnetized wind including radiative cooling and self-gravity of the gas. We find that magnetic fields have a strong effect on the morphology of the gas in the tail of the galaxy. While in the purely hydrodynamical case the tail is very clumpy, the magnetohydrodynamical case shows very filamentary structures in the tail. The filaments can be strongly supported by magnetic pressure and, wherever this is the case, the magnetic fields vectors tend to be aligned with the filaments. The ram pressure stripping process may lead to the formation of magnetized density tails that appear as bifurcated in the plane of the sky and resemble the double tails observed in ESO 137-001 and ESO 137-002. Such tails can be formed under a variety of situations, both for the disks oriented face-on with respect to the intracluster medium (ICM) wind and for the tilted ones. While this bifurcation is the consequence of the generic tendency for the magnetic fields to produce very filamentary tail morphology, the tail properties are further shaped by the combination of the magnetic field orientation and the sliding of the field past the disk surface exposed to the wind. Despite the fact that the effect of the magnetic field on the morphology of the tail is strong, magnetic draping does not strongly change the rate of gas stripping. For a face-on galaxy, the field tends to reduce the amount of gas stripping compared to the pure hydrodynamical case, and is associated with the formation of a stable magnetic draping layer on the side of

  10. Asymmetric Star Formation Efficiency Due to Ram Pressure Stripping

    Directory of Open Access Journals (Sweden)

    Paulina Troncoso Iribarren

    2016-12-01

    Full Text Available Previous works have shown that a dense cluster environment affects satellite galaxy properties and accelerates or truncates their evolutionary processes. In this work, we use the EAGLE simulation to study this effect, dissecting the galaxies in two halves: the one that is falling directly to the cluster (leading half and the one behind (trailing half. Considering all galaxies within the virial radius of the most massive groups and clusters of the simulation ( M h a l o > 10 13 . 8 [ M ⊙ ] , we find that on average the leading half presents an enhancement of the star formation rate with respect to the trailing half. We conclude that galaxies falling into the intra-cluster medium experience a boost in star-formation in their leading half due to ram pressure. Sparse observations of jellyfish galaxies have revealed visually the enhancement of the star formation in the leading half. In order to confirm this effect statistically using observations, different cases must be investigated using the simulation as a test dataset.

  11. Ram Pressure Stripping and Galaxy Orbits: The Case of the Virgo Cluster

    Science.gov (United States)

    Vollmer, B.; Cayatte, V.; Balkowski, C.; Duschl, W. J.

    2001-11-01

    We investigate the role of ram pressure stripping in the Virgo Cluster using N-body simulations. Radial orbits within the Virgo Cluster's gravitational potential are modeled and analyzed with respect to ram pressure stripping. The N-body model consists of 10,000 gas cloud complexes that can have inelastic collisions. Ram pressure is modeled as an additional acceleration on the clouds located at the surface of the gas distribution in the direction of the galaxy's motion within the cluster. We made several simulations, changing the orbital parameters in order to recover different stripping scenarios using realistic temporal ram pressure profiles. We investigate systematically the influence of the inclination angle between the disk and the orbital plane of the galaxy on the gasdynamics. We show that ram pressure can lead to a temporary increase of the central gas surface density. In some cases a considerable part of the total atomic gas mass (several 108 Msolar) can fall back onto the galactic disk after the stripping event. A quantitative relation between the orbit parameters and the resulting H I deficiency is derived containing explicitly the inclination angle between the disk and the orbital plane. The comparison between existing H I observations and the results of our simulations shows that the H I deficiency depends strongly on galaxy orbits. It is concluded that the scenario in which ram pressure stripping is responsible for the observed H I deficiency is consistent with all H I 21 cm observations in the Virgo Cluster.

  12. Pressure Characteristics of a Diffuser in a Ram RDE Propulsive Device

    Science.gov (United States)

    2017-07-21

    public release; distribution is unlimited. 1Innovative Scientific Solutions Incorporated, 7610 McEwen Road , Dayton, OH 45459 Unclassified...Continuous detonation Rotating-detonation- engine Ethylene-air Diffuser Pressure feedback Modeling and simulation Office of Naval Research 875 N. Randolph...RDE PROPULSIVE DEVICE INTRODUCTION This report focuses on the diffuser of a ram Rotating Detonation Engine (RDE) device. A ram RDE is a ramjet with

  13. Ram pressure stripping versus tidal interactions in the Abell clusters A85 and A496

    Science.gov (United States)

    Durret, F.; Bravo-Alfaro, H.; Venkatapathy, Y.; Mayya, Y. D.; Lobo, C.; van Gorkom, J. H.; Lopez-Gutierrez, M.

    2017-12-01

    We have undertaken a multi-wavelength survey of several nearby clusters of galaxies to compare the effects of ram pressure stripping to those of gravitational interactions and their role in galaxy evolution. We present here preliminary results for Abell 85 and Abell 496, based on optical, near infrared and HI imaging, as well as X-ray temperature maps.

  14. Discovery of Ram-pressure Stripped Gas around an Elliptical Galaxy in Abell 2670

    International Nuclear Information System (INIS)

    Sheen, Yun-Kyeong; Kim, Minjin; Smith, Rory; Yi, Sukyoung K.; Jaffé, Yara; Duc, Pierre-Alain; Nantais, Julie; Candlish, Graeme; Demarco, Ricardo; Treister, Ezequiel

    2017-01-01

    Studies of cluster galaxies are increasingly finding galaxies with spectacular one-sided tails of gas and young stars, suggestive of intense ram-pressure stripping. These so-called “jellyfish” galaxies typically have late-type morphology. In this paper, we present Multi Unit Spectroscopic Explorer (MUSE) observations of an elliptical galaxy in Abell 2670 with long tails of material visible in the optical spectra, as well as blobs with tadpole-like morphology. The spectra in the central part of the galaxy reveal a stellar component as well as ionized gas. The stellar component does not have significant rotation, while the ionized gas defines a clear star-forming gas disk. We argue, based on deep optical images of the galaxy, that the gas was most likely acquired during a past wet merger. It is possible that the star-forming blobs are also remnants of the merger. In addition, the direction and kinematics of the one-sided ionized tails, combined with the tadpole morphology of the star-forming blobs, strongly suggests that the system is undergoing ram pressure from the intracluster medium. In summary, this paper presents the discovery of a post-merger elliptical galaxy undergoing ram-pressure stripping.

  15. Discovery of Ram-pressure Stripped Gas around an Elliptical Galaxy in Abell 2670

    Energy Technology Data Exchange (ETDEWEB)

    Sheen, Yun-Kyeong; Kim, Minjin [Korea Astronomy and Space Science Institute, 776, Daedeokdae-ro, Yuseong-gu, Daejeon, 34055 (Korea, Republic of); Smith, Rory; Yi, Sukyoung K. [Department of Astronomy, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul, 03722 (Korea, Republic of); Jaffé, Yara [European Southern Observatory, Alonso de Cordova 3107, Vitacura, Casilla 19001, Santiago de Chile (Chile); Duc, Pierre-Alain [Laboratoire AIM Paris-Saclay, CEA/Irfu/SAp CNRS Universite Paris Diderot, F-91191 Gif-sur-Yvette Cedex (France); Nantais, Julie [Departamento de Ciencias Físicas, Universidad Andres Bello, Fernandez Concha 700, 7591538 Las Condes, Santiago (Chile); Candlish, Graeme [Instituto de Física y Astronomía, Universidad de Valparaíso, Gran Bretaña 1111, Valparaíso (Chile); Demarco, Ricardo [Departamento de Astronomía, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Treister, Ezequiel, E-mail: yksheen@kasi.re.kr [Instituto de Astrofísica, Facultad de Física, Pontificia Universidad Católica de Chile, Casilla 306, Santiago (Chile)

    2017-05-01

    Studies of cluster galaxies are increasingly finding galaxies with spectacular one-sided tails of gas and young stars, suggestive of intense ram-pressure stripping. These so-called “jellyfish” galaxies typically have late-type morphology. In this paper, we present Multi Unit Spectroscopic Explorer (MUSE) observations of an elliptical galaxy in Abell 2670 with long tails of material visible in the optical spectra, as well as blobs with tadpole-like morphology. The spectra in the central part of the galaxy reveal a stellar component as well as ionized gas. The stellar component does not have significant rotation, while the ionized gas defines a clear star-forming gas disk. We argue, based on deep optical images of the galaxy, that the gas was most likely acquired during a past wet merger. It is possible that the star-forming blobs are also remnants of the merger. In addition, the direction and kinematics of the one-sided ionized tails, combined with the tadpole morphology of the star-forming blobs, strongly suggests that the system is undergoing ram pressure from the intracluster medium. In summary, this paper presents the discovery of a post-merger elliptical galaxy undergoing ram-pressure stripping.

  16. Factors influencing delivered mean airway pressure during nasal CPAP with the RAM cannula.

    Science.gov (United States)

    Gerdes, Jeffrey S; Sivieri, Emidio M; Abbasi, Soraya

    2016-01-01

    To measure mean airway pressure (MAP) delivered through the RAM Cannula® when used with a ventilator in CPAP mode as a function of percent nares occlusion in a simulated nasal interface/test lung model and to compare the results to MAPs using a nasal continuous positive airway pressure (NCPAP) interface with nares fully occluded. An artificial airway model was connected to a spontaneous breathing lung model in which MAP was measured at set NCPAP levels between 4 and 8 cmH2 O provided by a Dräger Evita XL® ventilator and delivered through three sizes of RAM cannulae. Measurements were performed with varying leakage at the nasal interface by decreasing occlusion from 100% to 29%, half-way prong insertion, and simulated mouth leakage. Comparison measurements were made using the Dräger BabyFlow® NCPAP interface with a full nasal seal. With simulated mouth closed, the Dräger interface delivered MAPs within 0.5 cmH2 O of set CPAP levels. For the RAM cannula, with 60-80% nares occlusion, overall delivered MAPs were 60 ± 17% less than set CPAP levels (P CPAP levels when applied using the manufacturer recommended 60-80% nares occlusion, even with closed mouth and full nasal prong insertion conditions. © 2015 Wiley Periodicals, Inc.

  17. Observing RAM Pressure Stripping and Morphological Transformation in the Coma Cluster

    Science.gov (United States)

    Gregg, Michael; West, Michael

    2017-07-01

    The two largest spirals in the Coma cluster, NGC4911 and NGC4921, are being vigorously ram-pressure stripped by the hot intracluster medium. Our HST ACS and WFC3 images have revealed galactic scale shock fronts, giant "Pillars of Creation", rivulets of dust, and spatially coherent star formation in these grand design spirals. We have now obtained HST WFC3 imaging of five additional large Coma spirals to search for and investigate the effects of ram pressure stripping across the wider cluster environment. The results are equally spectacular as the first two examples. The geometry of the interactions in some cases allows an estimation of the various time scales involved, including gas flows out of the disk leading to creation of the ICM, and the attendant triggered star formation in the galaxy disks. The global star formation patterns yield insights into the spatial and temporal ISM-ICM interactions driving cluster galaxy evolution and ultimately transforming morphologies from spiral to S0. These processes were much more common in the early Universe when the intergalactic and intracluster components were initially created from stripping and destruction of member galaxies.

  18. Comparison of wind pressure measurements on Silsoe ...

    African Journals Online (AJOL)

    Comparison of wind pressure measurements on Silsoe experimental building from full-scale observation, wind-tunnel experiments and various CFD techniques. ... for anisotropic turbulence and curvature related strain effects and the same have been compared with the full-scale and wind-tunnel data for the present study.

  19. RAM analysis of earth pressure balance tunnel boring machines: A case study

    Directory of Open Access Journals (Sweden)

    Hasel Amini Khoshalan

    2015-12-01

    Full Text Available Earth pressure balance tunnel boring machines (EPB-TBMs are favorably applied in urban tunneling projects. Despite their numerous advantages, considerable delays and high maintenance cost are the main disadvantages these machines suffer from. Reliability, availability, and maintainability (RAM analysis is a practical technique that uses failure and repair dataset obtained over a reasonable time for dealing with proper machine operation, maintenance scheduling, cost control, and improving the availability and performance of such machines. In the present study, a database of failures and repairs of an EBP-TBM was collected in line 1 of Tabriz subway project over a 26-month interval of machine operation. In order to model the reliability of the TBM, this machine was divided into five distinct subsystems including mechanical, electrical, hydraulic, pneumatic, and water systems in a series configuration. According to trend and serial correlation tests, the renewal processes were applied, for analysis of all subsystems. After calculating the reliability and maintainability functions for all subsystems, it was revealed that the mechanical subsystem with the highest failure frequency has the lowest reliability and maintainability. Similarly, estimating the availability of all subsystems indicated that the mechanical subsystem has a relatively low availability level of 52.6%, while other subsystems have acceptable availability level of 97%. Finally, the overall availability of studied machine was calculated as 48.3%.

  20. Ram Pressure Stripping in the Low-Luminosity Virgo Cluster Elliptical Galaxy NGC 4476

    Science.gov (United States)

    Lucero, D. M.; Young, L. M.; van Gorkom, J. H.

    2005-09-01

    We present a deep VLA search for H I emission from the low-luminosity Virgo Cluster elliptical galaxy NGC 4476, which contains 1.1x108 solar masses of molecular gas in an undisturbed disk in regular rotation. No H I was detected. The total H I mass is less than 1.5x107 solar masses. If we compare our H I upper limit with the H2 content, we find that NGC 4476 is extremely deficient in H I compared with other galaxies detected in these two species. The H2/HI mass ratio for NGC 4476 is greater than 7, whereas typical H2/HI ratios for elliptical galaxies detected in both H I and H2 are less than 2. On the basis of this extreme H I deficiency and the intracluster medium density at the projected distance from M87, we argue that either NGC 4476 has undergone ram pressure stripping while traveling through the Virgo Cluster core or its average molecular gas density is larger and its interstellar UV field is smaller than in typical spiral galaxies. NGC 4476 is located 12 arcminutes in projection from M87, which causes extreme continuum confusion problems. We also discuss in detail the techniques used for continuum subtraction. The spectral dynamic range of our final image is 50,000 to 1. This work was partially supported by NSF grant AST 00-74709 to New Mexico Institute of Mining and Technology and NSF grant AST 00-98249 to Columbia University.

  1. Wind Tunnel Tests for Wind Pressure Distribution on Gable Roof Buildings

    Science.gov (United States)

    2013-01-01

    Gable roof buildings are widely used in industrial buildings. Based on wind tunnel tests with rigid models, wind pressure distributions on gable roof buildings with different aspect ratios were measured simultaneously. Some characteristics of the measured wind pressure field on the surfaces of the models were analyzed, including mean wind pressure, fluctuating wind pressure, peak negative wind pressure, and characteristics of proper orthogonal decomposition results of the measured wind pressure field. The results show that extremely high local suctions often occur in the leading edges of longitudinal wall and windward roof, roof corner, and roof ridge which are the severe damaged locations under strong wind. The aspect ratio of building has a certain effect on the mean wind pressure coefficients, and the effect relates to wind attack angle. Compared with experimental results, the region division of roof corner and roof ridge from AIJ2004 is more reasonable than those from CECS102:2002 and MBMA2006.The contributions of the first several eigenvectors to the overall wind pressure distributions become much bigger. The investigation can offer some basic understanding for estimating wind load distribution on gable roof buildings and facilitate wind-resistant design of cladding components and their connections considering wind load path. PMID:24082851

  2. HST IMAGING OF DUST STRUCTURES AND STARS IN THE RAM PRESSURE STRIPPED VIRGO SPIRALS NGC 4402 AND NGC 4522: STRIPPED FROM THE OUTSIDE IN WITH DENSE CLOUD DECOUPLING

    International Nuclear Information System (INIS)

    Abramson, A.; Kenney, J.; Crowl, H.; Tal, T.

    2016-01-01

    We describe and constrain the origins of interstellar medium (ISM) structures likely created by ongoing intracluster medium (ICM) ram pressure stripping in two Virgo Cluster spirals, NGC 4522 and NGC 4402, using Hubble Space Telescope (HST) BVI images of dust extinction and stars, as well as supplementary H i, H α , and radio continuum images. With a spatial resolution of ∼10 pc in the HST images, this is the highest-resolution study to date of the physical processes that occur during an ICM–ISM ram pressure stripping interaction, ram pressure stripping's effects on the multi-phase, multi-density ISM, and the formation and evolution of ram-pressure-stripped tails. In dust extinction, we view the leading side of NGC 4402 and the trailing side of NGC 4522, and so we see distinct types of features in both. In both galaxies, we identify some regions where dense clouds are decoupling or have decoupled and others where it appears that kiloparsec-sized sections of the ISM are moving coherently. NGC 4522 has experienced stronger, more recent pressure and has the “jellyfish” morphology characteristic of some ram-pressure-stripped galaxies. Its stripped tail extends up from the disk plane in continuous upturns of dust and stars curving up to ∼2 kpc above the disk plane. On the other side of the galaxy, there is a kinematically and morphologically distinct extraplanar arm of young, blue stars and ISM above a mostly stripped portion of the disk, and between it and the disk plane are decoupled dust clouds that have not been completely stripped. The leading side of NGC 4402 contains two kiloparsec-scale linear dust filaments with complex substructure that have partially decoupled from the surrounding ISM. NGC 4402 also contains long dust ridges, suggesting that large parts of the ISM are being pushed out at once. Both galaxies contain long ridges of polarized radio continuum emission indicating the presence of large-scale, ordered magnetic fields. We propose that

  3. Comparison of wind pressure measurements on Silsoe ...

    African Journals Online (AJOL)

    user

    lence and curvature related strain effects and the same have been compared with the full-scale and wind-tunnel data for the present study. Better turbulence models that will be more accurately predict bluff body flow fields and that are numerically stable for complex geometries are of paramount importance if the uses of ...

  4. Physical understanding of the tropical cyclone wind-pressure relationship.

    Science.gov (United States)

    Chavas, Daniel R; Reed, Kevin A; Knaff, John A

    2017-11-08

    The relationship between the two common measures of tropical cyclone intensity, the central pressure deficit and the peak near-surface wind speed, is a long-standing problem in tropical meteorology that has been approximated empirically yet lacks physical understanding. Here we provide theoretical grounding for this relationship. We first demonstrate that the central pressure deficit is highly predictable from the low-level wind field via gradient wind balance. We then show that this relationship reduces to a dependence on two velocity scales: the maximum azimuthal-mean azimuthal wind speed and half the product of the Coriolis parameter and outer storm size. This simple theory is found to hold across a hierarchy of models spanning reduced-complexity and Earth-like global simulations and observations. Thus, the central pressure deficit is an intensity measure that combines maximum wind speed, storm size, and background rotation rate. This work has significant implications for both fundamental understanding and risk analysis, including why the central pressure better explains historical economic damages than does maximum wind speed.

  5. Memoria RAM

    DEFF Research Database (Denmark)

    Cruz Suárez, Juan Carlos

    2013-01-01

    The present study intends to open a new theoretical means of analysis within the field of comparative memories. Through the metaphorical designation of RAM memory we will try to observe the continuous circulation of social discourses related to the collective memory of a particular community....... This constant movement of memory topics produces the internalization of those issues within the social discourse system. This fact leads to suppose that all the textual material produced by a certain social group remains outside the general archive and, therefore, acquires preponderance as a generative power...

  6. Wind turbine sound pressure level calculations at dwellings.

    Science.gov (United States)

    Keith, Stephen E; Feder, Katya; Voicescu, Sonia A; Soukhovtsev, Victor; Denning, Allison; Tsang, Jason; Broner, Norm; Leroux, Tony; Richarz, Werner; van den Berg, Frits

    2016-03-01

    This paper provides calculations of outdoor sound pressure levels (SPLs) at dwellings for 10 wind turbine models, to support Health Canada's Community Noise and Health Study. Manufacturer supplied and measured wind turbine sound power levels were used to calculate outdoor SPL at 1238 dwellings using ISO [(1996). ISO 9613-2-Acoustics] and a Swedish noise propagation method. Both methods yielded statistically equivalent results. The A- and C-weighted results were highly correlated over the 1238 dwellings (Pearson's linear correlation coefficient r > 0.8). Calculated wind turbine SPLs were compared to ambient SPLs from other sources, estimated using guidance documents from the United States and Alberta, Canada.

  7. Temperature, Humidity, Wind and Pressure Sensors (THWAPS) Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Ritsche, MT

    2011-01-17

    The temperature, humidity, wind, and pressure system (THWAPS) provide surface reference values of these measurements for balloon-borne sounding system (SONDE) launches. The THWAPS is located adjacent to the SONDE launch site at the Southern Great Plains (SGP) Central Facility. The THWAPS system is a combination of calibration-quality instruments intended to provide accurate measurements of meteorological conditions near the surface. Although the primary use of the system is to provide accurate surface reference values of temperature, pressure, relative humidity (RH), and wind velocity for comparison with radiosonde readings, the system includes a data logger to record time series of the measured variables.

  8. Effect of Opening the Sash of a Centre-Pivot Roof Window on Wind Pressure Coefficients

    DEFF Research Database (Denmark)

    Iqbal, Ahsan; Wigö, Hans; Heiselberg, Per

    2014-01-01

    . The wind pressures were defined in terms of wind pressure coefficients. Traditionally wind pressure coefficients are extracted from the analysis of sealed plain surface. These wind pressure coefficients are used to estimate the natural ventilation rate through windows/openings due to wind effect. Surface...... averaged wind pressure coefficients do not accurately estimate the airflow rates. Therefore, local wind pressure coefficients are needed especially for dynamic calculation of airflow rates. From the wind tunnel experiments, it is concluded that outward opening the sash can significantly affect the wind...... pressure distribution nearby the window. The use of wind pressure coefficients from the analysis of sealed plain surface may lead to erroneous estimation of airflow rate....

  9. Influence of Wind Pressure on the Carbonation of Concrete

    Directory of Open Access Journals (Sweden)

    Dujian Zou

    2015-07-01

    Full Text Available Carbonation is one of the major deteriorations that accelerate steel corrosion in reinforced concrete structures. Many mathematical/numerical models of the carbonation process, primarily diffusion-reaction models, have been established to predict the carbonation depth. However, the mass transfer of carbon dioxide in porous concrete includes molecular diffusion and convection mass transfer. In particular, the convection mass transfer induced by pressure difference is called penetration mass transfer. This paper presents the influence of penetration mass transfer on the carbonation. A penetration-reaction carbonation model was constructed and validated by accelerated test results under high pressure. Then the characteristics of wind pressure on the carbonation were investigated through finite element analysis considering steady and fluctuating wind flows. The results indicate that the wind pressure on the surface of concrete buildings results in deeper carbonation depth than that just considering the diffusion of carbon dioxide. In addition, the influence of wind pressure on carbonation tends to increase significantly with carbonation depth.

  10. A STATISTICAL SURVEY OF DYNAMIC PRESSURE PULSES IN THE SOLAR WIND BASED ON WIND OBSERVATIONS

    International Nuclear Information System (INIS)

    Zuo, Pingbing; Feng, Xueshang; Wang, Yi; Xie, Yanqiong; Xu, Xiaojun

    2015-01-01

    Solar wind dynamic pressure pulse (DPP) structures, across which the dynamic pressure changes abruptly over timescales from a few seconds to several minutes, are often observed in the near-Earth space environment. The space weather effects of DPPs on the magnetosphere–ionosphere coupling system have been widely investigated in the last two decades. In this study, we perform a statistical survey on the properties of DPPs near 1 AU based on nearly 20 years of observations from the WIND spacecraft. It is found that only a tiny fraction of DPPs (around 4.2%) can be regarded as interplanetary shocks. For most DPPs, the total pressure (the sum of the thermal pressure and magnetic pressure) remains in equilibrium, but there also exists a small fraction of DPPs that are not pressure-balanced. The overwhelming majority of DPPs are associated with solar wind disturbances, including coronal mass ejection-related flows, corotating interaction regions, as well as complex ejecta. The annual variations of the averaged occurrence rate of DPPs are roughly in phase with the solar activity during solar cycle 23, and during the rising phase of solar cycle 24

  11. Role of the pressure anisotropy in the relativistic pulsar wind

    Energy Technology Data Exchange (ETDEWEB)

    Asseo, E.; Beaufils, D. (Ecole Polytechnique, 91 - Palaiseau (France). Centre de Physique Theorique)

    1983-01-01

    We generalize the hot relativistic MHD wind analysis to include the anisotropy of the pressure created in the pulsar wind by the strong magnetic field. Even with anisotropy the relativistic MHD equations integrate. In a very intense magnetic field, the motion of relativistic particles becomes rapidly one-dimensional in the direction of the field due to the very important radiative losses. Consequently, their distribution function becomes also one-dimensional and the component of the pressure, in the direction perpendicular to the magnetic field, decrease. In the limit Psub(perpendicular to)approx.=0, Psub(parallel)not=0 we obtain a solution for the fluid flow which, starting at the neutron star surface, reaches smoothly infinity.

  12. Role of the pressure anisotropy in the relativistic pulsar wind

    Science.gov (United States)

    Asseo, E.; Beaufils, D.

    1983-01-01

    The hot relativistic MHD wind analysis is generalized to include the anisotropy of the pressure created in the pulsar wind by the strong magnetic field. Even with anisotropy the relativistic MHD equations integrate. In a very intense magnetic field, the motion of relativistic particles becomes rapidly one dimensional in the direction of the field due to the very important radiative losses. Consequently, their distribution function becomes also one-dimensional and the component of the pressure, in the direction perpendicular to the magnetic field, decrease. In the limit the transverse component of P approximately 0 the longitudinal component of P not equal 0 we obtain a solution for the fluid flow which, starting at the neutron star surface, reaches smoothly infinity.

  13. Composite Pressure Vessel Variability in Geometry and Filament Winding Model

    Science.gov (United States)

    Green, Steven J.; Greene, Nathanael J.

    2012-01-01

    Composite pressure vessels (CPVs) are used in a variety of applications ranging from carbon dioxide canisters for paintball guns to life support and pressurant storage on the International Space Station. With widespread use, it is important to be able to evaluate the effect of variability on structural performance. Data analysis was completed on CPVs to determine the amount of variation that occurs among the same type of CPV, and a filament winding routine was developed to facilitate study of the effect of manufacturing variation on structural response.

  14. Corotating pressure waves without streams in the solar wind

    International Nuclear Information System (INIS)

    Burlaga, L.F.

    1983-01-01

    Voyager 1 and 2 magnetic field and plasma data are presented which demonstrate the existence of large scale, corotating, non-linear pressure waves between 2 AU and 4 AU that are not accompanied by fast streams. The pressure waves are presumed to be generated by corotating streams near the Sun. For two of the three pressure waves that are discussed, the absence of a stream is probably a real, physical effect, viz., a consequence of deceleration of the stream by the associated compression wave. For the third pressure wave, the apparent absence of a stream may be a geometrical effect it is likely that the stream was at latitudes just above those of the spacecraft, while the associated shocks and compression wave extended over a broader range of latitudes so that they could be observed by the spacecraft. It is suggested that the development of large-scale non-linear pressure waves at the expense of the kinetic energy of streams produces a qualitative change in the solar wind in the outer heliosphere. Within a few AU the quasi-stationary solar wind structure is determined by corotating streams whose structure is determined by the boundary conditions near the Sun

  15. Magnetosheath waves under very low solar wind dynamic pressure: Wind/Geotail observations

    Directory of Open Access Journals (Sweden)

    C. J. Farrugia

    2005-06-01

    Full Text Available The expanded bow shock on and around "the day the solar wind almost disappeared" (11 May 1999 allowed the Geotail spacecraft to make a practically uninterrupted 54-h-long magnetosheath pass near dusk (16:30-21:11 magnetic local time at a radial distance of 24 to 30 RE (Earth radii. During most of this period, interplanetary parameters varied gradually and in such a way as to give rise to two extreme magnetosheath structures, one dominated by magnetohydrodynamic (MHD effects and the other by gas dynamic effects. We focus attention on unusual features of electromagnetic ion wave activity in the former magnetosheath state, and compare these features with those in the latter. Magnetic fluctuations in the gas dynamic magnetosheath were dominated by compressional mirror mode waves, and left- and right-hand polarized electromagnetic ion cyclotron (EIC waves transverse to the background field. In contrast, the MHD magnetosheath, lasting for over one day, was devoid of mirror oscillations and permeated instead by EIC waves of weak intensity. The weak wave intensity is related to the prevailing low solar wind dynamic pressures. Left-hand polarized EIC waves were replaced by bursts of right-hand polarized waves, which remained for many hours the only ion wave activity present. This activity occurred when the magnetosheath proton temperature anisotropy (= $T_{p, perp}/T_{p, parallel}{-}1$ became negative. This was because the weakened bow shock exposed the magnetosheath directly to the (negative temperature anisotropy of the solar wind. Unlike the normal case studied in the literature, these right-hand waves were not by-products of left-hand polarized waves but derived their energy source directly from the magnetosheath temperature anisotropy. Brief entries into the

  16. Magnetosheath waves under very low solar wind dynamic pressure: Wind/Geotail observations

    Directory of Open Access Journals (Sweden)

    C. J. Farrugia

    2005-06-01

    Full Text Available The expanded bow shock on and around "the day the solar wind almost disappeared" (11 May 1999 allowed the Geotail spacecraft to make a practically uninterrupted 54-h-long magnetosheath pass near dusk (16:30-21:11 magnetic local time at a radial distance of 24 to 30 RE (Earth radii. During most of this period, interplanetary parameters varied gradually and in such a way as to give rise to two extreme magnetosheath structures, one dominated by magnetohydrodynamic (MHD effects and the other by gas dynamic effects. We focus attention on unusual features of electromagnetic ion wave activity in the former magnetosheath state, and compare these features with those in the latter. Magnetic fluctuations in the gas dynamic magnetosheath were dominated by compressional mirror mode waves, and left- and right-hand polarized electromagnetic ion cyclotron (EIC waves transverse to the background field. In contrast, the MHD magnetosheath, lasting for over one day, was devoid of mirror oscillations and permeated instead by EIC waves of weak intensity. The weak wave intensity is related to the prevailing low solar wind dynamic pressures. Left-hand polarized EIC waves were replaced by bursts of right-hand polarized waves, which remained for many hours the only ion wave activity present. This activity occurred when the magnetosheath proton temperature anisotropy (= became negative. This was because the weakened bow shock exposed the magnetosheath directly to the (negative temperature anisotropy of the solar wind. Unlike the normal case studied in the literature, these right-hand waves were not by-products of left-hand polarized waves but derived their energy source directly from the magnetosheath temperature anisotropy. Brief entries into the low latitude boundary layer (LLBL and duskside magnetosphere occurred under such inflated conditions that the magnetospheric magnetic pressure was insufficient to maintain pressure balance. In these crossings, the inner edge of

  17. Expert judgment study on wind pressure coefficients. Part 2 : Unprocessed data: Expert rationales Wind tunnel data. Final report

    NARCIS (Netherlands)

    De Wit, S.

    1999-01-01

    In the design of low-rise buildings, wind tunnel experiments are scarcely employed to assess the wind-induced pressures, which are required e.g. for the simulation of ventilation flows or for the evaluation of the structural integrity. Instead, techniques are used, which predominandy rely on inter-

  18. Investigation of the spatial variability and possible origins of wind-induced air pressure fluctuations responsible for pressure pumping

    Science.gov (United States)

    Mohr, Manuel; Laemmel, Thomas; Maier, Martin; Zeeman, Matthias; Longdoz, Bernard; Schindler, Dirk

    2017-04-01

    The exchange of greenhouse gases between the soil and the atmosphere is highly relevant for the climate of the Earth. Recent research suggests that wind-induced air pressure fluctuations can alter the soil gas transport and therefore soil gas efflux significantly. Using a newly developed method, we measured soil gas transport in situ in a well aerated forest soil. Results from these measurements showed that the commonly used soil gas diffusion coefficient is enhanced up to 30% during periods of strong wind-induced air pressure fluctuations. The air pressure fluctuations above the forest floor are only induced at high above-canopy wind speeds (> 5 m s-1) and lie in the frequency range 0.01-0.1 Hz. Moreover, the amplitudes of air pressure fluctuations in this frequency range show a clear quadratic dependence on mean above-canopy wind speed. However, the origin of these wind-induced pressure fluctuations is still unclear. Airflow measurements and high-precision air pressure measurements were conducted at three different vegetation-covered sites (conifer forest, deciduous forest, grassland) to investigate the spatial variability of dominant air pressure fluctuations, their origin and vegetation-dependent characteristics. At the conifer forest site, a vertical profile of air pressure fluctuations was measured and an array consisting of five pressure sensors were installed at the forest floor. At the grassland site, the air pressure measurements were compared with wind observations made by ground-based LIDAR and spatial temperature observations from a fibre-optic sensing network (ScaleX Campaign 2016). Preliminary results show that at all sites the amplitudes of relevant air pressure fluctuations increase with increasing wind speed. Data from the array measurements reveal that there are no time lags between the air pressure signals of different heights, but a time lag existed between the air pressure signals of the sensors distributed laterally on the forest floor

  19. Radiation Belt Transport Driven by Solar Wind Dynamic Pressure Fluctuations

    Science.gov (United States)

    Kress, B. T.; Hudson, M. K.; Ukhorskiy, A. Y.; Mueller, H.

    2012-12-01

    The creation of the Earth's outer zone radiation belts is attributed to earthward transport and adiabatic acceleration of electrons by drift-resonant interactions with electromagnetic fluctuations in the magnetosphere. Three types of radial transport driven by solar wind dynamic pressure fluctuations that have been identified are: (1) radial diffusion [Falthammer, 1965], (2) significant changes in the phase space density radial profile due to a single or few ULF drift-resonant interactions [Ukhorskiy et al., 2006; Degeling et al., 2008], and (3) shock associated injections of radiation belt electrons occurring in less than a drift period [Li et al., 1993]. A progress report will be given on work to fully characterize different forms of radial transport and their effect on the Earth's radiation belts. The work is being carried out by computing test-particle trajectories in electric and magnetic fields from a simple analytic ULF field model and from global MHD simulations of the magnetosphere. Degeling, A. W., L. G. Ozeke, R. Rankin, I. R. Mann, and K. Kabin (2008), Drift resonant generation of peaked relativistic electron distributions by Pc 5 ULF waves, textit{J. Geophys. Res., 113}, A02208, doi:10.1029/2007JA012411. Fälthammar, C.-G. (1965), Effects of Time-Dependent Electric Fields on Geomagnetically Trapped Radiation, J. Geophys. Res., 70(11), 2503-2516, doi:10.1029/JZ070i011p02503. Li, X., I. Roth, M. Temerin, J. R. Wygant, M. K. Hudson, and J. B. Blake (1993), Simulation of the prompt energization and transport of radiation belt particles during the March 24, 1991 SSC, textit{Geophys. Res. Lett., 20}(22), 2423-2426, doi:10.1029/93GL02701. Ukhorskiy, A. Y., B. J. Anderson, K. Takahashi, and N. A. Tsyganenko (2006), Impact of ULF oscillations in solar wind dynamic pressure on the outer radiation belt electrons, textit{Geophys. Res. Lett., 33}(6), L06111, doi:10.1029/2005GL024380.

  20. The Solar Wind Environment in Time

    Science.gov (United States)

    Pognan, Quentin; Garraffo, Cecilia; Cohen, Ofer; Drake, Jeremy J.

    2018-03-01

    We use magnetograms of eight solar analogs of ages 30 Myr–3.6 Gyr obtained from Zeeman Doppler Imaging and taken from the literature, together with two solar magnetograms, to drive magnetohydrodynamical wind simulations and construct an evolutionary scenario of the solar wind environment and its angular momentum loss rate. With observed magnetograms of the radial field strength as the only variant in the wind model, we find that a power-law model fitted to the derived angular momentum loss rate against time, t, results in a spin-down relation Ω ∝ t ‑0.51, for angular speed Ω, which is remarkably consistent with the well-established Skumanich law Ω ∝ t ‑0.5. We use the model wind conditions to estimate the magnetospheric standoff distances for an Earth-like test planet situated at 1 au for each of the stellar cases, and to obtain trends of minimum and maximum wind ram pressure and average ram pressure in the solar system through time. The wind ram pressure declines with time as \\overline{{P}ram}}\\propto {t}2/3, amounting to a factor of 50 or so over the present lifetime of the solar system.

  1. Estudo de variabilidade do vento em escala sazonal sobre o nordeste brasileiro utilizando o RAMS: os casos de 1973-1974 e 1982-1983 Study of wind variability in seasonal scale over Northeast Brazil using RAMS: events of 1973-1974 and 1982-1983

    Directory of Open Access Journals (Sweden)

    Juliana Lima Oliveira

    2011-03-01

    Full Text Available O propósito deste trabalho é analisar a influência da variabilidade climática e os impactos da circulação geral no comportamento dos ventos sobre o Nordeste do Brasil, com enfoque no modelo atmosférico como uma possível ferramenta para previsão de geração de energia eólica. Análises estatísticas sugerem que há uma correlação bastante significativa entre os índices climáticos (índices de El Niño e dipolo e a intensidade do vento sobre o Nordeste brasileiro, principalmente nos meses de fevereiro a maio, correspondentes à quadra chuvosa. Dados de reanálise do NCEP para eventos de ENOS fortes (El Niño de 1982-83 e La Niña de 1973-74 sugerem que, nesses casos, a influência da circulação geral é tal que eventos fortes de El Niño e La Niña atuam no sentido de intensificar e enfraquecer, respectivamente, os ventos sobre essa região. Como circulações em menor escala, associadas ao sistema de brisa e à forçantes topográficos são bastante relevantes para determinar as características do vento local, o modelo atmosférico de mesoescala Regional Atmospheric Modeling System (RAMS foi utilizado para simular a velocidade e direção dos ventos de julho a junho de 1982-83 e 1973-74, a fim de estimar a variabilidade dos ventos em escala sazonal e os possíveis impactos dessas variações na produção de energia eólica no Nordeste.The purpose of this work is to analyze the influence of climate variability and general circulation impact on the behavior of the winds over Northeast Brazil, with emphasis in the atmospheric model as a feasible tool for forecasting of wind power generation. Statistical analysis suggest that there is a significant correlation between the climate indices (El Niño and Dipole indices and the average wind speed over Northeast Brazil, mainly between February and May, period that corresponds to the four-month rainy season. Data from NCEP Reanalysis for extreme events (as the 1982-1983 El Niño events

  2. L Shankar Ram

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education. L Shankar Ram. Articles written in Resonance – Journal of Science Education. Volume 8 Issue 3 March 2003 pp 57-63 Classroom. How much Flour should you Pack in a 1 kg Packet:-Use of a Gaussian Model · T Krishnan L Shankar Ram · More Details Fulltext ...

  3. v ram prabha

    Indian Academy of Sciences (India)

    Home; Journals; Sadhana. V RAM PRABHA. Articles written in Sadhana. Volume 42 Issue 2 February 2017 pp 143-151. Enhanced multi-attribute trust protocol for malicious node detection in wireless sensor networks · V RAM PRABHA P LATHA · More Details Abstract Fulltext PDF. There has been a tremendous growth in ...

  4. Ram Kumar Singh

    Indian Academy of Sciences (India)

    Home; Journals; Sadhana. Ram Kumar Singh. Articles written in Sadhana. Volume 38 Issue 5 October 2013 pp 999-1025. Integrated safety assessment of Indian nuclear power plants for extreme events: Reducing impact on public mind · Anil Kakodkar Ram Kumar Singh · More Details Abstract Fulltext PDF. Nuclear energy ...

  5. M Ram Murty

    Indian Academy of Sciences (India)

    M Ram Murty. Articles written in Resonance – Journal of Science Education. Volume 18 Issue 8 August 2013 pp 712-731 General Article. The Twin Prime Problem and Generalizations (apres Yitang Zhang) · M Ram Murty · More Details Fulltext PDF. Volume 18 Issue 9 September 2013 pp 789-798 General Article.

  6. Wind pressure testing of tornado safe room components made from wood

    Science.gov (United States)

    Robert Falk; Deepak Shrestha

    2016-01-01

    To evaluate the ability of a wood tornado safe room to resist wind pressures produced by a tornado, two safe room com-ponents were tested for wind pressure strength. A tornado safe room ceiling panel and door were static-pressure-tested according to ASTM E 330 using a vacuum test system. Re-sults indicate that the panels had load capacities from 2.4 to 3.5 times that...

  7. Field measurement of wind pressure and wind-induced vibration of large-span spatial cable-truss system under strong wind or typhoon

    Directory of Open Access Journals (Sweden)

    ZHANG Zhihong

    2013-10-01

    Full Text Available In order to ensure wind-resistance safety of large-span pre-stressed flexible system in southeast coast area of China,and to prepare something for revising of current codes of practice or technical standards,the present paper conducts field measurement of wind pressure and wind-induced vibration of a practical and typical large-span spatial cable-truss system-lunar stadium in Yueqing city.Wind loading and wind effects on full-scale structure under strong wind or typhoon in real architectural environment can be obtained directly and effectively.Field measurement is the best way to investigate the wind loading property,wind effects,and wind-structure interactions of large-span flexible system.Measured data will be highly valuable for scientific research and practical design.On the other hand,it also provides the basis of wind-resistance safety design of this kind of tension structures.If any creative development,it would dramatically improve the research level of large-span pre-stressed flexible system in our country.

  8. SQL-RAMS

    Science.gov (United States)

    Alfaro, Victor O.; Casey, Nancy J.

    2005-01-01

    SQL-RAMS (where "SQL" signifies Structured Query Language and "RAMS" signifies Rocketdyne Automated Management System) is a successor to the legacy version of RAMS -- a computer program used to manage all work, nonconformance, corrective action, and configuration management on rocket engines and ground support equipment at Stennis Space Center. The legacy version resided in the File-Maker Pro software system and was constructed in modules that could act as standalone programs. There was little or no integration among modules. Because of limitations on file-management capabilities in FileMaker Pro, and because of difficulty of integration of FileMaker Pro with other software systems for exchange of data using such industry standards as SQL, the legacy version of RAMS proved to be limited, and working to circumvent its limitations too time-consuming. In contrast, SQL-RAMS is an integrated SQL-server-based program that supports all data-exchange software industry standards. Whereas in the legacy version, it was necessary to access individual modules to gain insight into a particular workstatus document, SQL-RAMS provides access through a single-screen presentation of core modules. In addition, SQL-RAMS enables rapid and efficient filtering of displayed statuses by predefined categories and test numbers. SQL-RAMS is rich in functionality and encompasses significant improvements over the legacy system. It provides users the ability to perform many tasks, which in the past required administrator intervention. Additionally, many of the design limitations have been corrected, allowing for a robust application that is user centric.

  9. AUTOMATIC DETECTION ALGORITHM OF DYNAMIC PRESSURE PULSES IN THE SOLAR WIND

    International Nuclear Information System (INIS)

    Zuo, Pingbing; Feng, Xueshang; Wang, Yi; Xie, Yanqiong; Li, Huijun; Xu, Xiaojun

    2015-01-01

    Dynamic pressure pulses (DPPs) in the solar wind are a significant phenomenon closely related to the solar-terrestrial connection and physical processes of solar wind dynamics. In order to automatically identify DPPs from solar wind measurements, we develop a procedure with a three-step detection algorithm that is able to rapidly select DPPs from the plasma data stream and simultaneously define the transition region where large dynamic pressure variations occur and demarcate the upstream and downstream region by selecting the relatively quiet status before and after the abrupt change in dynamic pressure. To demonstrate the usefulness, efficiency, and accuracy of this procedure, we have applied it to the Wind observations from 1996 to 2008 by successfully obtaining the DPPs. The procedure can also be applied to other solar wind spacecraft observation data sets with different time resolutions

  10. Near 7-day response of ocean bottom pressure to atmospheric surface pressure and winds in the northern South China Sea

    Science.gov (United States)

    Zhang, Kun; Zhu, Xiao-Hua; Zhao, Ruixiang

    2018-02-01

    Ocean bottom pressures, observed by five pressure-recording inverted echo sounders (PIESs) from October 2012 to July 2014, exhibit strong near 7-day variability in the northern South China Sea (SCS) where long-term in situ bottom pressure observations are quite sparse. This variability was strongest in October 2013 during the near two years observation period. By joint analysis with European Center for Medium-Range Weather Forecasts (ECMWF) data, it is shown that the near 7-day ocean bottom pressure variability is closely related to the local atmospheric surface pressure and winds. Within a period band near 7 days, there are high coherences, exceeding 95% significance level, of observed ocean bottom pressure with local atmospheric surface pressure and with both zonal and meridional components of the wind. Ekman pumping/suction caused by the meridional component of the wind in particular, is suggested as one driving mechanism. A Kelvin wave response to the near 7-day oscillation would propagate down along the continental slope, observed at the Qui Nhon in the Vietnam. By multiple and partial coherence analyses, we find that local atmospheric surface pressure and Ekman pumping/suction show nearly equal influence on ocean bottom pressure variability at near 7-day periods. A schematic diagram representing an idealized model gives us a possible mechanism to explain the relationship between ocean bottom pressure and local atmospheric forcing at near 7-day periods in the northern SCS.

  11. Wind pressure loading for tall buidings: a case study of Warsaw Trade Tower

    CSIR Research Space (South Africa)

    Cwik, M

    2012-12-01

    Full Text Available This paper presents an overview of wind-tunnel tests of one of the highest buildings in Poland - Warsaw Trade Tower. The aim of the tests was to evaluate the extreme values of wind pressure over building facade. In the first part, the development...

  12. High-Lift Low Reynolds Number Aerofoils With Specified Pressure Drop for Ducted Wind Turbine

    NARCIS (Netherlands)

    Tang, J.; van Bussel, G.J.W.

    2017-01-01

    A new high-lift aerofoil modification for the duct has been developed and will be experimentally tested in a small wind tunnel. Aerofoils for such wind tunnel ducts typically operate in the low Reynolds number range from 2 × 105 to 6 × 105. The effect of a duct and of rotor on power and pressure

  13. Residential tornado safe room from commodity wood products – impact and wind pressure testing

    Science.gov (United States)

    Robert H. Falk; James J. Bridwell; C. Adam Senalik; Marshall Begel

    2018-01-01

    A tornado safe room is a shelter designed to provide protection during a tornado and is specifically engineered to resist the high wind pressures and debris impact generated by these high wind events. The required performance criteria of these shelters has been established and is found in the International Code Council Standard for the Design and Construction of Storm...

  14. An experimental investigation of wind pressures on square pillars in tornado-like vortices

    International Nuclear Information System (INIS)

    Iwatani, Yoshiharu; Maruta, Eizou; Kanda, Makoto; Hattori, Yousuke; Hamano, Naoki; Matsuura, Takeshi

    1992-01-01

    This report describes a laboratory simulation of tornado-like vortices and laboratory measurements of steady wind loads on model structures in tornado-like vortices. The variations of wind direction and wind speed of tornado-like vortices and ground surface pressure under tornado-like vortices with the swirl ratio, Reynolds number and the surface roughness were investigated. Wind pressure distributions on square pillars were measured in tornado-like vortices. It was observed in the experiment that the negative pressures on the roof faces of square pillars were high and distributed rather uniformly but these on the side faces differed greatly from place to place and locally became high. The high pressure regions on the side faces were close to ground surface in the case where the model structures stood in the center of tornado-like vortex, and became higher as the increase of distance between the model structures and the center of tornado-like vortices. (author)

  15. Converting Wind Energy to Ammonia at Lower Pressure

    International Nuclear Information System (INIS)

    Malmali, Mahdi; Reese, Michael; McCormick, Alon V.; Cussler, E. L.

    2017-01-01

    Renewable wind energy can be used to make ammonia. However, wind-generated ammonia costs about twice that made from a traditional fossil-fuel driven process. To reduce the production cost, we replace the conventional ammonia condensation with a selective absorber containing metal halides, e.g., calcium chloride, operating at near synthesis temperatures. With this reaction-absorption process, ammonia can be synthesized at 20 bar from air, water, and wind-generated electricity, with rates comparable to the conventional process running at 150–300 bar. In our reaction-absorption process, the rate of ammonia synthesis is now controlled not by the chemical reaction but largely by the pump used to recycle the unreacted gases. The results suggest an alternative route to distributed ammonia manufacture which can locally supply nitrogen fertilizer and also a method to capture stranded wind energy as a carbon-neutral liquid fuel.

  16. Design of a new urban wind turbine airfoil using a pressure-load inverse method

    Energy Technology Data Exchange (ETDEWEB)

    Henriques, J.C.C.; Gato, L.M.C. [IDMEC, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Marques da Silva, F. [LNEC - Laboratorio Nacional de Engenharia Civil, Av. Brasil, 101, 1700-066 Lisboa (Portugal); Estanqueiro, A.I. [INETI - Instituto Nacional de Engenharia, Tecnologia e Inovacao Estrada do Paco do Lumiar, 1649-038 Lisboa (Portugal)

    2009-12-15

    This paper presents the design methodology of a new wind turbine airfoil that achieves high performance in urban environment by increasing the maximum lift. For this purpose, an inverse method was applied to obtain a new wind turbine blade section with constant pressure-load along the chord, at the design inlet angle. In comparison with conventional blade section designs, the new airfoil has increased maximum lift, reduced leading edge suction peak and controlled soft-stall behaviour, due to a reduction of the adverse pressure gradient on the suction side. Wind tunnel experimental results confirmed the computational results. (author)

  17. Perturbations of the solar wind flow by radial and latitudinal pick-up ion pressure gradients

    Directory of Open Access Journals (Sweden)

    H. J. Fahr

    2004-06-01

    Full Text Available It has been found that pick-up ions at their dynamical incorporation into the solar wind modify the original conditions of the asymptotic solar wind plasma flow. In this respect, it has meanwhile been revealed in many papers that these type of solar wind modifications, i.e. deceleration and decrease of effective Mach number, are not only due to the pick-up ion loading effects, but also to the action of pick-up ion pressure gradients. Up to now only the effects of radial pick-up ion pressure gradients were considered, however, analogously but latitudinal pressure gradients also appear to be important. Here we study the effects of radial and latitudinal pick-up ion pressure gradients, occurring especially during solar minimum conditions at mid-latitude regions where slow solar wind streams change to fast solar wind streams. First, we give estimates of the latitudinal wind components connected with these gradients, and then after revealing its importance, present a more quantitative calculation of solar wind velocity and density perturbations resulting from these pressure forces. It is shown that the relative density perturbations near and in the ecliptic increase with radial distance and thus may well explain the measured non-spherically symmetric density decrease with distance. We also show that the solar wind decelerations actually seen with Voyager-1/2 are in conciliation with interstellar hydrogen densities of nH∞≥0.1cm-3, in contrast to earlier claims for nH∞=0.05cm-3.

  18. Perturbations of the solar wind flow by radial and latitudinal pick-up ion pressure gradients

    Directory of Open Access Journals (Sweden)

    H. J. Fahr

    2004-06-01

    Full Text Available It has been found that pick-up ions at their dynamical incorporation into the solar wind modify the original conditions of the asymptotic solar wind plasma flow. In this respect, it has meanwhile been revealed in many papers that these type of solar wind modifications, i.e. deceleration and decrease of effective Mach number, are not only due to the pick-up ion loading effects, but also to the action of pick-up ion pressure gradients. Up to now only the effects of radial pick-up ion pressure gradients were considered, however, analogously but latitudinal pressure gradients also appear to be important. Here we study the effects of radial and latitudinal pick-up ion pressure gradients, occurring especially during solar minimum conditions at mid-latitude regions where slow solar wind streams change to fast solar wind streams. First, we give estimates of the latitudinal wind components connected with these gradients, and then after revealing its importance, present a more quantitative calculation of solar wind velocity and density perturbations resulting from these pressure forces. It is shown that the relative density perturbations near and in the ecliptic increase with radial distance and thus may well explain the measured non-spherically symmetric density decrease with distance. We also show that the solar wind decelerations actually seen with Voyager-1/2 are in conciliation with interstellar hydrogen densities of nH∞≥0.1cm-3, in contrast to earlier claims for nH∞=0.05cm-3.

  19. m Ram Vivek

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences. M RAM VIVEK. Articles written in Journal of Chemical Sciences. Volume 129 Issue 5 May 2017 pp 515-531 Regular Article. Assessing therapeutic potential of molecules: molecular property diagnostic suite for tuberculosis (MPDS) · ANAMIKA SINGH GAUR ANSHU ...

  20. Sharma, Dr Ram Swaroop

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1989 Section: Earth & Planetary Sciences. Sharma, Dr Ram Swaroop Ph.D. (Basel), FNA. Date of birth: 10 July 1937. Specialization: Metamorphic Petrology, Mineralogy and Precambrian Geology Address: 70/36, Pratapnagar, Sector 7, Sanganer (RHB), Jaipur 302 033, Rajasthan

  1. Sharma, Dr Ram Prakash

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1987 Section: Chemistry. Sharma, Dr Ram Prakash Ph.D. (Aligarh and London). Date of birth: 5 January 1939. Specialization: Natural Products Chemistry and New Synthetic Methods Address: E-45, DGS Housing Society, Sector 22, Plot No. 6, Dwaraka, New Delhi 110 045, U.T.

  2. Yadav, Dr Ram Ratan

    Indian Academy of Sciences (India)

    Yadav, Dr Ram Ratan Ph.D. (Lucknow), FNASc. Date of birth: 5 January 1956. Specialization: Palaeoclimatology, Tree Ring Analysis, Climate Change, Biodiversity Address: CSIR Emeritus Scientist, Wadia Institute of Himalayan Geology, 33, Gen. Mahadev Singh Road, Dehra Dun 248 001, Uttrakhand Contact: Residence: ...

  3. Ram Sagar, Dr

    Indian Academy of Sciences (India)

    Ram Sagar, Dr Ph.D. (Gorakhpur), FNASc. Date of birth: 1 July 1952. Specialization: Astronomy & Astrophysics and High Energy Physics Address: NASI Senior Scientist, Indian Institute of Astrophysics, Sarjapur Road, Koramangala, Bengaluru 560 034, Karnataka Contact: Office: (080) 2254 1221. Residence: (080) 2571 ...

  4. Ram Sagar, Dr

    Indian Academy of Sciences (India)

    Fellow Profile. Elected: 2001 Section: Physics. Ram Sagar, Dr Ph.D. (Gorakhpur), FNASc. Date of birth: 1 July 1952. Specialization: Astronomy & Astrophysics and High Energy Physics Address: NASI Senior Scientist, Indian Institute of Astrophysics, Sarjapur Road, Koramangala, Bengaluru 560 034, Karnataka Contact:

  5. Effects of Abrupt Variations of Solar Wind Dynamic Pressure on the High-Latitude Ionosphere

    Directory of Open Access Journals (Sweden)

    Igino Coco

    2011-01-01

    Full Text Available We show the results of a statistical study on the effects in the high-latitude ionosphere of abrupt variations of solar wind dynamic pressure, using Super Dual Auroral Radar Network (SuperDARN data in both hemispheres. We find that, during periods of quiet ionospheric conditions, the amount of radar backscatter increases when a variation in the dynamic pressure occurs, both positive (increase of the pressure and negative (decrease of the pressure. We also investigate the behaviour of the Cross-Polar Cap Potential (CPCP during pressure variations and show preliminary results.

  6. Hydraulic rams; a comparative investigation

    NARCIS (Netherlands)

    Tacke, J.H.P.M.

    1988-01-01

    A mathematical model describing the essential features of hydraulic ram operation is developed in order to clarify the possibilities and limitations of the ram relative to its site and its adjustments. The model distinguishes three different periods in the pumping cycle of the hydraulic ram:

  7. HyRAM V1.0 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Groth, Katrina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zumwalt, Hannah Ruth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Andrew Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-03-01

    Hydrogen Risk Assessment Models (HyRAM) is a prototype software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards, including thermal effects from jet fires and thermal pressure effects from deflagration. HyRAM version 1.0 incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of various aspects of gaseous hydrogen release and flame physics. This document provides an example of how to use HyRAM to conduct analysis of a fueling facility. This document will guide users through the software and how to enter and edit certain inputs that are specific to the user-defined facility. Description of the methodology and models contained in HyRAM is provided in [1]. This User’s Guide is intended to capture the main features of HyRAM version 1.0 (any HyRAM version numbered as 1.0.X.XXX). This user guide was created with HyRAM 1.0.1.798. Due to ongoing software development activities, newer versions of HyRAM may have differences from this guide.

  8. Numerical investigation of vibration and dynamic pressure of a vertical axis wind turbine

    Directory of Open Access Journals (Sweden)

    F Erchiqui

    2016-10-01

    Full Text Available In the environmental field, the problems of noise reduction have become a major preoccupation, particularly on the noise generated by the acoustic radiation pressure produced by wind turbines. This paper is aimed at presenting the investigation on the application of variational indirect boundary element method for study the acoustic radiation pressure produced by vertical-axis wind turbine. For this initiative, we considered Neumann boundary condition. The formulation has two advantages: the first one is to avoid the meshing of the fluid domain; the second advantage is to treat the singular integral of the Green's function, solution of fundamental solution of the wave equation in frequency domain.

  9. Experimental and numerical characterization of wind-induced pressure coefficients on nuclear buildings and chimney exhausts

    Energy Technology Data Exchange (ETDEWEB)

    Ricciardi, Laurent, E-mail: laurent.ricciardi@irsn.fr; Gélain, Thomas; Soares, Sandrine

    2015-10-15

    Highlights: • Experiments on scale models of nuclear buildings and chimney exhausts were performed. • Pressure coefficient fields on buildings are shown for various wind directions. • Evolution of pressure coefficient vs U/W ratio is given for various chimney exhausts. • RANS simulations using SST k–ω turbulence model were performed on most studied cases. • A good agreement is overall observed, with Root Mean Square Deviation lower than 0.15. - Abstract: Wind creates pressure effects on different surfaces of buildings according to their exposure to the wind, in particular at external communications. In nuclear facilities, these effects can change contamination transfers inside the building and can even lead to contamination release into the environment, especially in damaged (ventilation stopped) or accidental situations. The diversity of geometries of facilities requires the use of a validated code for predicting pressure coefficients, which characterize the wind effect on the building walls and the interaction between the wind and chimney exhaust. The first aim of a research program launched by the French Institut de Radioprotection et de Sûreté Nucléaire (IRSN), was therefore to acquire experimental data of the mean pressure coefficients for different geometries of buildings and chimneys through wind tunnel tests and then to validate a CFD code (ANSYS CFX) from these experimental results. The simulations were performed using a steady RANS approach and a two-equation SST k–ω turbulence model. After a mesh sensitivity study for one configuration of building and chimney, a comparison was carried out between the numerical and experimental values for other studied configurations. This comparison was generally satisfactory, averaged over all measurement points, with values of Root Mean Square Deviations lower than 0.15 for most cases.

  10. Direct monitoring of wind-induced pressure-pumping on gas transport in soil

    Science.gov (United States)

    Laemmel, Thomas; Mohr, Manuel; Schindler, Dirk; Schack-Kirchner, Helmer; Maier, Martin

    2017-04-01

    Gas exchange between soil and atmosphere is important for the biogeochemistry of soils and is commonly assumed to be governed by molecular diffusion. Yet a few previous field studies identified other gas transport processes such as wind-induced pressure-pumping to enhance soil-atmosphere fluxes significantly. However, since these wind-induced non-diffusive gas transport processes in soil often occur intermittently, the quantification of their contribution to soil gas emissions is challenging. To quantify the effects of wind-induced pressure-pumping on soil gas transport, we developed a method for in situ monitoring of soil gas transport. The method includes the use of Helium (He) as a tracer gas which was continuously injected into the soil. The resulting He steady-state concentration profile was monitored. Gas transport parameters of the soil were inversely modelled. We used our method during a field campaign in a well-aerated forest soil over three months. During periods of low wind speed, soil gas transport was modelled assuming diffusion as transport process. During periods of high wind speed, the previously steady diffusive He concentration profile showed temporary concentration decreases in the topsoil, indicating an increase of the effective gas transport rate in the topsoil up to 30%. The enhancement of effective topsoil soil gas diffusivity resulted from wind-induced air pressure fluctuations which are referred to as pressure-pumping. These air pressure fluctuations had frequencies between 0.1 and 0.01 Hz and amplitudes up to 10 Pa and occurred at above-canopy wind speeds greater than 5 m s-1. We could show the importance of the enhancement of the gas transport rate in relation with the wind intensity and corresponding air pressure fluctuations characteristics. We directly detected and quantified the pressure-pumping effect on gas transport in soil in a field study for the first time, and could thus validate and underpin the importance of this non

  11. Wind-tunnel investigations of pressure distribution over high-rise buildings

    CSIR Research Space (South Africa)

    Cwik, M

    2013-09-01

    Full Text Available pressure distribution over the façade of 208 m high Warsaw Trade Tower building. Wind tunnel tests were a part of a wider research project which also includes full-scale measurements and numerical simulations (CFD, FEM), in order to examine the possibility...

  12. Large fog collectors: New strategies for collection efficiency and structural response to wind pressure

    Science.gov (United States)

    Holmes, Robert; Rivera, Juan de Dios; de la Jara, Emilio

    2015-01-01

    Most studies of large fog collectors (LFC) have focused on the collection efficiency, the amount of water collected, or economic and social aspects, but have not addressed the effects of strong winds on the system. Wind pressure is directly related to fog water collection efficiency but on the other hand may cause serious damage on the structure of LFCs. This study focuses in the effects of wind pressure on the components of the LFC as an integral system, and the ways to face strong winds with no significant damage. For this purpose we analysed cases of mechanical failure of LFCs both in our experimental station at Peña Blanca in Chile and elsewhere. The effects of wind pressure can be described as a sequence of physical processes, starting with the mesh deformation as a way of adapting to the induced stresses. For a big enough pressure, local stress concentrations generate a progressive rupture of the mesh. In cases where the mesh is sufficiently strong the wind force causes the partial or total collapse of the structure. Usually the weakest part is the mesh, especially close to where it is attached to the structure. The way the mesh is attached to the frame or cable of the structure is particularly important since it can induce significant stress concentrations. Mesh failure before the structure failure may be considered as a mechanical fuse, since it is cheaper to repair. However, more practical mechanical fuses can be conceived. In relation to structural performance and water collection efficiency, we propose a new design strategy that considers a three-dimensional spatial display of the collection screen, oblique incidence angle of wind on mesh and small mesh area between the supporting frame. The proposed design strategies consider both the wind pressure on mesh and structure and the collection efficiency as an integral solution for the LFC. These new design strategies are the final output of this research. Applying these strategies a multi-funnel LFC is

  13. Background Pressure Profiles for Sonic Boom Vehicle Testing in the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel

    Science.gov (United States)

    Castner, Raymond; Shaw, Stephen; Adamson, Eric; Simerly, Stephanie

    2013-01-01

    In an effort to identify test facilities that offer sonic boom measurement capabilities, an exploratory test program was initiated using wind tunnels at NASA research centers. The subject of this report is the sonic boom pressure rail data collected in the Glenn Research Center 8- by 6-Foot Supersonic Wind Tunnel. The purpose is to summarize the lessons learned based on the test activity, specifically relating to collecting sonic boom data which has a large amount of spatial pressure variation. The wind tunnel background pressure profiles are presented as well as data which demonstrated how both wind tunnel Mach number and model support-strut position affected the wind tunnel background pressure profile. Techniques were developed to mitigate these effects and are presented.

  14. Externally Verifiable Oblivious RAM

    Directory of Open Access Journals (Sweden)

    Gancher Joshua

    2017-04-01

    Full Text Available We present the idea of externally verifiable oblivious RAM (ORAM. Our goal is to allow a client and server carrying out an ORAM protocol to have disputes adjudicated by a third party, allowing for the enforcement of penalties against an unreliable or malicious server. We give a security definition that guarantees protection not only against a malicious server but also against a client making false accusations. We then give modifications of the Path ORAM [15] and Ring ORAM [9] protocols that meet this security definition. These protocols both have the same asymptotic runtimes as the semi-honest original versions and require the external verifier to be involved only when the client or server deviates from the protocol. Finally, we implement externally verified ORAM, along with an automated cryptocurrency contract to use as the external verifier.

  15. Atmospheric pressure, density, temperature and wind variations between 50 and 200 km

    Science.gov (United States)

    Justus, C. G.; Woodrum, A.

    1972-01-01

    Data on atmospheric pressure, density, temperature and winds between 50 and 200 km were collected from sources including Meteorological Rocket Network data, ROBIN falling sphere data, grenade release and pitot tube data, meteor winds, chemical release winds, satellite data, and others. These data were analyzed by a daily difference method and results on the distribution statistics, magnitude, and spatial structure of the irregular atmospheric variations are presented. Time structures of the irregular variations were determined by the analysis of residuals from harmonic analysis of time series data. The observed height variations of irregular winds and densities are found to be in accord with a theoretical relation between these two quantities. The latitude variations (at 50 - 60 km height) show an increasing trend with latitude. A possible explanation of the unusually large irregular wind magnitudes of the White Sands MRN data is given in terms of mountain wave generation by the Sierra Nevada range about 1000 km west of White Sands. An analytical method is developed which, based on an analogy of the irregular motion field with axisymmetric turbulence, allows measured or model correlation or structure functions to be used to evaluate the effective frequency spectra of scalar and vector quantities of a spacecraft moving at any speed and at any trajectory elevation angle.

  16. Development of tunable high pressure CO2 laser for lidar measurements of pollutants and wind velocities

    Science.gov (United States)

    Levine, J. S.; Guerra, M.; Javan, A.

    1980-01-01

    The problem of laser energy extraction at a tunable monochromatic frequency from an energetic high pressure CO2 pulsed laser plasma, for application to remote sensing of atmospheric pollutants by Differential Absorption Lidar (DIAL) and of wind velocities by Doppler Lidar, was investigated. The energy extraction principle analyzed is based on transient injection locking (TIL) at a tunable frequency. Several critical experiments for high gain power amplification by TIL are presented.

  17. Time-Accurate Unsteady Pressure Loads Simulated for the Space Launch System at Wind Tunnel Conditions

    Science.gov (United States)

    Alter, Stephen J.; Brauckmann, Gregory J.; Kleb, William L.; Glass, Christopher E.; Streett, Craig L.; Schuster, David M.

    2015-01-01

    A transonic flow field about a Space Launch System (SLS) configuration was simulated with the Fully Unstructured Three-Dimensional (FUN3D) computational fluid dynamics (CFD) code at wind tunnel conditions. Unsteady, time-accurate computations were performed using second-order Delayed Detached Eddy Simulation (DDES) for up to 1.5 physical seconds. The surface pressure time history was collected at 619 locations, 169 of which matched locations on a 2.5 percent wind tunnel model that was tested in the 11 ft. x 11 ft. test section of the NASA Ames Research Center's Unitary Plan Wind Tunnel. Comparisons between computation and experiment showed that the peak surface pressure RMS level occurs behind the forward attach hardware, and good agreement for frequency and power was obtained in this region. Computational domain, grid resolution, and time step sensitivity studies were performed. These included an investigation of pseudo-time sub-iteration convergence. Using these sensitivity studies and experimental data comparisons, a set of best practices to date have been established for FUN3D simulations for SLS launch vehicle analysis. To the author's knowledge, this is the first time DDES has been used in a systematic approach and establish simulation time needed, to analyze unsteady pressure loads on a space launch vehicle such as the NASA SLS.

  18. Influence of increased static pressure in MHD-channel of hypervelocity wind tunnel on its characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Alfyorov, V.I.; Rudakova, A.P.; Rukavets, V.P.; Shcherbakov, G.I. [Central Aerohydrodynamic Institute (TsAGI), Zhukovsky (Russian Federation)

    1995-12-31

    One of the main weaknesses of available MHD gas acceleration wind tunnels which restricts their application for simulating vehicle re-entry flights and reproducing scramjet combustion chamber conditions is a relatively low static pressure in the channel (P{approximately}0.1 to 0.2 Atm). The possibility of increasing this pressure and the influence of the increased pressure on the MHD-accelerator characteristics are the subject of the present paper. It is shown that the main challenge is the necessity of increasing the total Lorentz force proportionally to the channel gas density at electrode current density not resulting in heat and electrical breakdown and the development of the side walls and interelectrode insulators designed for higher heat fluxes, q {approximately} 5 to 10 kw/cm{sup 2}. Some possible wall design versions are suggested. The influence of increased pressure is investigated using the Faraday - type MED channel at static pressures in the MHD channel from 0.2 to 1.0 Atm and total accelerating current I = 300 to 1,100 Amps when B=2.5T. Forty five electrodes are used in the MHD channel at maximum current density of 50 A/cm{sup 2}. The channel flow is calculated by applying the model of a gas in thermodynamic equilibrium. The influence of the increased pressure on electrodynamic (accelerator electrode voltages and currents, Hall voltage and current) and gasdynamic (distributions of static pressure, temperature, velocity, Mach numbers, etc., along the channel length) characteristics is evaluated. Some recommendations on the development of MHD channels for hypersonic wind tunnels designed for high pressure are suggested.

  19. Aerodynamics of Tracked Ram Air Cushion Vehicles - Effects of Pitch Attitude and Upper Surface Flow

    Science.gov (United States)

    1979-12-01

    Three types of experiments were conducted on geometrically similar model of a Tracked Ram Air Cushion Vehicle (TRACV). The first consisted of wind tunnel tests with the vehicle model positioned within a short segment of stationary guideway. In the se...

  20. Time Accurate Unsteady Pressure Loads Simulated for the Space Launch System at a Wind Tunnel Condition

    Science.gov (United States)

    Alter, Stephen J.; Brauckmann, Gregory J.; Kleb, Bil; Streett, Craig L; Glass, Christopher E.; Schuster, David M.

    2015-01-01

    Using the Fully Unstructured Three-Dimensional (FUN3D) computational fluid dynamics code, an unsteady, time-accurate flow field about a Space Launch System configuration was simulated at a transonic wind tunnel condition (Mach = 0.9). Delayed detached eddy simulation combined with Reynolds Averaged Naiver-Stokes and a Spallart-Almaras turbulence model were employed for the simulation. Second order accurate time evolution scheme was used to simulate the flow field, with a minimum of 0.2 seconds of simulated time to as much as 1.4 seconds. Data was collected at 480 pressure taps at locations, 139 of which matched a 3% wind tunnel model, tested in the Transonic Dynamic Tunnel (TDT) facility at NASA Langley Research Center. Comparisons between computation and experiment showed agreement within 5% in terms of location for peak RMS levels, and 20% for frequency and magnitude of power spectral densities. Grid resolution and time step sensitivity studies were performed to identify methods for improved accuracy comparisons to wind tunnel data. With limited computational resources, accurate trends for reduced vibratory loads on the vehicle were observed. Exploratory methods such as determining minimized computed errors based on CFL number and sub-iterations, as well as evaluating frequency content of the unsteady pressures and evaluation of oscillatory shock structures were used in this study to enhance computational efficiency and solution accuracy. These techniques enabled development of a set of best practices, for the evaluation of future flight vehicle designs in terms of vibratory loads.

  1. STRONG SOLAR WIND DYNAMIC PRESSURE PULSES: INTERPLANETARY SOURCES AND THEIR IMPACTS ON GEOSYNCHRONOUS MAGNETIC FIELDS

    International Nuclear Information System (INIS)

    Zuo, Pingbing; Feng, Xueshang; Wang, Yi; Xie, Yanqiong; Xu, Xiaojun

    2015-01-01

    In this investigation, we first present a statistical result of the interplanetary sources of very strong solar wind dynamic pressure pulses (DPPs) detected by WIND during solar cycle 23. It is found that the vast majority of strong DPPs reside within solar wind disturbances. Although the variabilities of geosynchronous magnetic fields (GMFs) due to the impact of positive DPPs have been well established, there appears to be no systematic investigations on the response of GMFs to negative DPPs. Here, we study both the decompression effects of very strong negative DPPs and the compression from strong positive DPPs on GMFs at different magnetic local time sectors. In response to the decompression of strong negative DPPs, GMFs on the dayside near dawn and near dusk on the nightside, are generally depressed. But near the midnight region, the responses of GMF are very diverse, being either positive or negative. For part of the events when GOES is located at the midnight sector, the GMF is found to abnormally increase as the result of magnetospheric decompression caused by negative DPPs. It is known that under certain conditions magnetic depression of nightside GMFs can be caused by the impact of positive DPPs. Here, we find that a stronger pressure enhancement may have a higher probability of producing the exceptional depression of GMF at the midnight region. Statistically, both the decompression effect of strong negative DPPs and the compression effect of strong positive DPPs depend on the magnetic local time, which are stronger at the noon sector

  2. Measurement of temperature and pressure on the surface of a blunt cone using FBG sensor in hypersonic wind tunnel

    International Nuclear Information System (INIS)

    Guru Prasad, A S; Sharath, U; Asokan, S; Nagarjun, V; Hegde, G M

    2013-01-01

    Measurement of temperature and pressure exerted on the leeward surface of a blunt cone specimen has been demonstrated in the present work in a hypersonic wind tunnel using fiber Bragg grating (FBG) sensors. The experiments were conducted on a 30° apex-angle blunt cone with 51 mm base diameter at wind flow speeds of Mach 6.5 and 8.35 in a 300 mm hypersonic wind tunnel of Indian Institute of Science, Bangalore. A special pressure insensitive temperature sensor probe along with the conventional bare FBG sensors was used for explicit temperature and aerodynamic pressure measurement respectively on the leeward surface of the specimen. computational fluid dynamics (CFD) simulation of the flow field around the blunt cone specimen has also been carried out to obtain the temperature and pressure at conditions analogous to experiments. The results obtained from FBG sensors and the CFD simulations are found to be in good agreement with each other. (paper)

  3. Ram pressure stripping of tilted galaxies

    Czech Academy of Sciences Publication Activity Database

    Jáchym, Pavel; Köppen, J.; Palouš, Jan; Combes, F.

    2009-01-01

    Roč. 500, č. 2 (2009), s. 693-703 ISSN 0004-6361 R&D Projects: GA MŠk(CZ) LC06014; GA ČR GP205/08/P556 Institutional research plan: CEZ:AV0Z10030501 Keywords : interstellar medium * clusters of galaxies * gas stripping Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.179, year: 2009

  4. Impact of Spatial Resolution on Wind Field Derived Estimates of Air Pressure Depression in the Hurricane Eye

    Directory of Open Access Journals (Sweden)

    Linwood Jones

    2010-03-01

    Full Text Available Measurements of the near surface horizontal wind field in a hurricane with spatial resolution of order 1–10 km are possible using airborne microwave radiometer imagers. An assessment is made of the information content of the measured winds as a function of the spatial resolution of the imager. An existing algorithm is used which estimates the maximum surface air pressure depression in the hurricane eye from the maximum wind speed. High resolution numerical model wind fields from Hurricane Frances 2004 are convolved with various HIRAD antenna spatial filters to observe the impact of the antenna design on the central pressure depression in the eye that can be deduced from it.

  5. A RAM: Realidade e Utopia

    OpenAIRE

    Pereira, Carlos Santos

    2003-01-01

    Evoluções tecnológicas recentes, nomeadamente em matéria de electrónica e de informática, e a busca de conceitos operacionais adaptados às novas tecnologias estão a revolucionar a arte da guerra. O êxito da “Tempestade no Deserto”, em 1991 e das sucessivas intervenções militares dos EUA nos anos seguintes mais reforçaram a ideia de que se estava perante uma verdadeira revolução – É a Revolução nos Assuntos Militares (RAM). Na realidade, a RAM é um fenómeno comple...

  6. Measurement and analysis of the water hammer in ram pump

    Indian Academy of Sciences (India)

    This paper presents the results of experimental research of the phenomena occurring in water ram during a single cycle of its operation. Apart from a brief introduction and description of the test stand and data recording system, the work includes a broad interpretation of the obtained results. Based on the pressure ...

  7. Time-bin quantum RAM

    Science.gov (United States)

    Moiseev, E. S.; Moiseev, S. A.

    2016-11-01

    We have proposed a compact scheme of quantum random access memory (qRAM) based on the impedance matched multi-qubit photon echo quantum memory incorporated with the control four-level atom in two coupled QED cavities. A set of matching conditions for basic physical parameters of the qRAM scheme that provides an efficient quantum control of the fast single photon storage and readout has been found. In particular, it has been discovered that the efficient qRAM operations are determined by the specific properties of the excited photonic molecule coupling the two QED cavities. Herein, the maximal efficiency of the qRAM is realized when the cooperativity parameter of the photonic molecule equals to unity that can be experimentally achievable. We have also elaborated upon the new quantum address scheme where the multi-time-bin photon state is used for the control of the four-level atom during the readout of the photonic qubits from the quantum memory. The scheme reduces the required number of logical elements to one. Experimental implementation by means of current quantum technologies in the optical and microwave domains is also discussed.

  8. Mohan Ram, Prof. Holenarasipur Yoganarasimham

    Indian Academy of Sciences (India)

    Mohan Ram, Prof. Holenarasipur Yoganarasimham Ph.D. (Delhi), FNA, FNASc, FNAAS Council Service: 1983-88; Vice-President: 1986-88. Date of birth: 24 September 1930. Specialization: Plant Growth & Development and Economic Botany Address: No. 174, SFS DDA Flats, Mukherjee Nagar, Delhi 110 009, U.T.

  9. Miniaturized compact water-cooled pitot-pressure probe for flow-field surveys in hypersonic wind tunnels

    Science.gov (United States)

    Ashby, George C.

    1988-01-01

    An experimental investigation of the design of pitot probes for flowfield surveys in hypersonic wind tunnels is reported. The results show that a pitot-pressure probe can be miniaturized for minimum interference effects by locating the transducer in the probe support body and water-cooling it so that the pressure-settling time and transducer temperature are compatible with hypersonic tunnel operation and flow conditions. Flowfield surveys around a two-to-one elliptical cone model in a 20-inch Mach 6 wind tunnel using such a probe show that probe interference effects are essentially eliminated.

  10. Inspection and Reconstruction of Metal-Roof Deformation under Wind Pressure Based on Bend Sensors.

    Science.gov (United States)

    Yang, Liman; Cui, Langfu; Li, Yunhua; An, Chao

    2017-05-06

    Metal roof sheathings are widely employed in large-span buildings because of their light weight, high strength and corrosion resistance. However, their severe working environment may lead to deformation, leakage and wind-lift, etc. Thus, predicting these damages in advance and taking maintenance measures accordingly has become important to avoid economic losses and personal injuries. Conventionally, the health monitoring of metal roofs mainly relies on manual inspection, which unavoidably compromises the working efficiency and cannot diagnose and predict possible failures in time. Thus, we proposed a novel damage monitoring scheme implemented by laying bend sensors on vital points of metal roofs to precisely monitor the deformation in real time. A fast reconstruction model based on improved Levy-type solution is established to estimate the overall deflection distribution from the measured data. A standing seam metal roof under wind pressure is modeled as an elastic thin plate with a uniform load and symmetrical boundaries. The superposition method and Levy solution are adopted to obtain the analytical model that can converge quickly through simplifying an infinite series. The truncation error of this model is further analyzed. Simulation and experiments are carried out. They show that the proposed model is in reasonable agreement with the experimental results.

  11. Geosynchronous magnetic field responses to fast solar wind dynamic pressure enhancements: MHD field model

    Directory of Open Access Journals (Sweden)

    T. R. Sun

    2012-08-01

    Full Text Available We performed global MHD simulations of the geosynchronous magnetic field in response to fast solar wind dynamic pressure (Pd enhancements. Taking three Pd enhancement events in 2000 as examples, we found that the main features of the total field B and the dominant component Bz can be efficiently predicted by the MHD model. The predicted B and Bz varies with local time, with the highest level near noon and a slightly lower level around mid-night. However, it is more challenging to accurately predict the responses of the smaller component at the geosynchronous orbit (i.e., Bx and By. In contrast, the limitations of T01 model in predicting responses to fast Pd enhancements are presented.

  12. Radiation pressure in galactic disks: stability, turbulence, and winds in the single-scattering limit

    Science.gov (United States)

    Wibking, Benjamin D.; Thompson, Todd A.; Krumholz, Mark R.

    2018-04-01

    The radiation force on dust grains may be dynamically important in driving turbulence and outflows in rapidly star-forming galaxies. Recent studies focus on the highly optically-thick limit relevant to the densest ultra-luminous galaxies and super star clusters, where reprocessed infrared photons provide the dominant source of electromagnetic momentum. However, even among starburst galaxies, the great majority instead lie in the so-called "single-scattering" limit, where the system is optically-thick to the incident starlight, but optically-thin to the re-radiated infrared. In this paper we present a stability analysis and multidimensional radiation-hydrodynamic simulations exploring the stability and dynamics of isothermal dusty gas columns in this regime. We describe our algorithm for full angle-dependent radiation transport based on the discontinuous Galerkin finite element method. For a range of near-Eddington fluxes, we show that the medium is unstable, producing convective-like motions in a turbulent atmosphere with a scale height significantly inflated compared to the gas pressure scale height and mass-weighted turbulent energy densities of ˜0.01 - 0.1 of the midplane radiation energy density, corresponding to mass-weighted velocity dispersions of Mach number ˜0.5 - 2. Extrapolation of our results to optical depths of 103 implies maximum turbulent Mach numbers of ˜20. Comparing our results to galaxy-averaged observations, and subject to the approximations of our calculations, we find that radiation pressure does not contribute significantly to the effective supersonic pressure support in star-forming disks, which in general are substantially sub-Eddington. We further examine the time-averaged vertical density profiles in dynamical equilibrium and comment on implications for radiation-pressure-driven galactic winds.

  13. Aerodynamic noise characterization of a full-scale wind turbine through high-frequency surface pressure measurements

    DEFF Research Database (Denmark)

    Bertagnolio, Franck; Aagaard Madsen, Helge; Bak, Christian

    2015-01-01

    wind turbine with a 80 m diameter rotor as well as measurements of an airfoil section tested in a wind tunnel. The turbine was extensively equipped in order to monitor the local inflow onto the rotating blades. Further a section of the 38 m long blade was instrumented with 50 microphones flush...... in a wind tunnel on a copy of the blade section of the full scale blade. Computational Fluid Dynamics calculations were conducted to investigate the influence of the inflow conditions on the airfoil and blade sections aerodynamics and aeroacoustics. Comparisons between measurement data and model results......The aim of this work is to investigate and characterize the high-frequency surface pressure fluctuations on a full-scale wind turbine blade and in particular the influence of the atmospheric turbulence. As these fluctuations are highly correlated to the sources of both turbulent inflow noise...

  14. Surface wind, pressure and temperature fields near tornadic and non-tornadic narrow cold-frontal rainbands

    Science.gov (United States)

    Clark, Matthew; Parker, Douglas

    2014-05-01

    Narrow cold frontal rainbands (NCFRs) occur frequently in the UK and other parts of northwest Europe. At the surface, the passage of an NCFR is often marked by a sharp wind veer, abrupt pressure increase and a rapid temperature decrease. Tornadoes and other instances of localised wind damage sometimes occur in association with meso-gamma-scale vortices (sometimes called misocyclones) that form along the zone of abrupt horizontal wind veer (and associated vertical vorticity) at the leading edge of the NCFR. Using one-minute-resolution data from a mesoscale network of automatic weather stations, surface pressure, wind and temperature fields in the vicinity of 12 NCFRs (five of which were tornadic) have been investigated. High-resolution surface analyses were obtained by mapping temporal variations in the observed parameters to equivalent spatial variations, using a system velocity determined by analysis of the radar-observed movement of NCFR precipitation segments. Substantial differences were found in the structure of surface wind and pressure fields close to tornadic and non-tornadic NCFRs. Tornadic NCFRs exhibited a large wind veer (near 90°) and strong pre- and post-frontal winds. These attributes were associated with large vertical vorticity and horizontal convergence across the front. Tornadoes typically occurred where vertical vorticity and horizontal convergence were increasing. Here, we present surface analyses from selected cases, and draw comparisons between the tornadic and non-tornadic NCFRs. Some Doppler radar observations will be presented, illustrating the development of misocyclones along parts of the NCFR that exhibit strong, and increasing, vertical vorticity stretching. The influence of the stability of the pre-frontal air on the likelihood of tornadoes will also be discussed.

  15. Analysis of wind-induced dynamic pressure fluctuations during one and a half Martian years at Gale Crater

    Science.gov (United States)

    Ullán, Aurora; Zorzano, María-Paz; Javier Martín-Torres, Francisco; Valentín-Serrano, Patricia; Kahanpää, Henrik; Harri, Ari-Matti; Gómez-Elvira, Javier; Navarro, Sara

    2017-05-01

    The Rover Environmental Monitoring Station (REMS) instrument on-board the Mars Science Laboratory (MSL) has acquired unprecedented measurements of key environmental variables at the base of Gale Crater. The pressure measured by REMS shows modulations with a very structured pattern of short-time scale (of the order of seconds to several minutes) mild fluctuations (typically up to 0.2 Pa at daytime and 1 Pa at night-time). These dynamic pressure oscillations are consistent with wind, air and ground temperature modulations measured simultaneously by REMS. We detect the signals of a repetitive pattern of upslope/downslope winds, with maximal speeds of about 21 m/s, associated with thermal changes in the air and surface temperatures, that are initiated after sunset and finish with sunrise proving that Gale, a 4.5 km deep impact crater, is an active Aeolian environment. At nighttime topographic slope winds are intense with maximal activity from 17:00 through 23:00 Local Mean Solar Time, and simultaneous changes of surface temperature are detected. During the day, the wind modulations are related to convection of the planetary boundary layer, winds are softer with maximum wind speed of about 14 m/s. The ground temperature is modulated by the forced convection of winds, with amplitudes between 0.2 K and 0.5 K, and the air temperatures fluctuate with amplitudes of about 2 K. The analysis of more than one and a half Martian years indicates the year-to-year repeatability of these environmental phenomena. The wind pattern minimizes at the beginning of the south hemisphere winter (Ls 90) season and maximizes during late spring and early summer (Ls 270). The procedure that we present here is a useful tool to investigate in a semi-quantitative way the winds by: i) filling both seasonal and diurnal gaps where wind measurements do not exist, ii) providing an alternative way for comparisons through different measuring principia and, iii) filling the gap of observation of short

  16. Análisis RAMS

    OpenAIRE

    Zárate Fraga, Marta

    2012-01-01

    El objetivo principal de este proyecto es la realización de una plantilla en Microsoft Office Excel 2007, para la realización de cualquier análisis RAMS. De esta forma se evitará que cada vez que se quiera realizar un análisis RAMS se tenga que empezar de cero. Esta aplicación es especialmente útil para analistas sin experiencia, reduciendo el tiempo de búsqueda de qué información es conveniente introducir en el análisis, qué información se ha de obtener y qué pasos hay que seguir. La plantil...

  17. Wind interference between two high-rise building models: Interference factors for minimum peak pressures on facades and roof

    NARCIS (Netherlands)

    Bronkhorst, A.J.; Geurts, C.P.W.; Bentum, C.A. van; Blocken, B.

    2014-01-01

    A wind tunnel study was performed to assess the influence of interference between two high-rise building models on the minimum peak pressure coefficients on facades and roof. A total of 33 configurations were investigated for 24 angles of incidence. The influence of a square and circular interfering

  18. Wind-Tunnel Investigations on a Changed Mustang Profile with Nose Flap Force and Pressure-Distribution Measurements

    Science.gov (United States)

    Krueger, W.

    1947-01-01

    Measurements are described which were taken in the large wind tunnel of the AVA on a rectangular wing "Mustang 2" with nose flap of a chord of 10 percent. Besides force measurements the results of pressure-distribution measurements are given and compared with those on the same profile "without" nose flap.

  19. A Broad Continuum of Aeolian Impact Ripple Sizes on Mars is Allowed by Low Dynamic Wind Pressures

    Science.gov (United States)

    Sullivan, R. J., Jr.; Kok, J. F.; Yizhaq, H.

    2017-12-01

    Aeolian impact ripples are generated by impacts of wind-blown sand grains, and are common in environments with loose sand on Earth and Mars. Previous work has shown that, within a fully developed saltation cloud, impact ripple height grows upward into the boundary layer until limited by the effects of increasing wind dynamic pressure at the crest (e.g., lengthening of splash trajectories, or direct entrainment of grains by the wind). On Earth, this process limits ripples of well-sorted 250 µm dune sands to heights of millimeters, and strong winds can impose sufficient lateral dynamic pressure to flatten and erase these ripples. Rover observations show much larger ripple-like bedforms on Mars, raising questions about their formative mechanism. Here, we hypothesize that two factors allow impact ripples to grow much higher on Mars than on Earth: (1) previous work predicts a much larger difference between impact threshold and fluid threshold wind speeds on Mars than on Earth; and (2) recent analysis has revealed how low saltation flux can be initiated and sustained well below fluid threshold on Mars, allowing impact ripples to migrate entirely under prevailing conditions of relatively low wind speeds in the thin martian atmosphere. Under these circumstances, martian ripples would need to grow much larger than on Earth before reaching their maximum height limited by wind dynamic pressure effects. Because the initial size of impact ripples is similar on Mars and Earth, this should generate a much broader continuum of impact ripple sizes on Mars. Compared with Earth, far more time should be needed on Mars for impact ripples to achieve their maximum possible size. Consequently, in cases where wind azimuths are mixed but one azimuth is more dominant than others, martian impact ripples of all sizes can exist together in the same setting, with the largest examples reflecting the most common/formative wind azimuths. In cases where wind azimuth is not dominated by a single

  20. Thermal and Pressure Characterization of a Wind Tunnel Force Balance Using the Single Vector System. Experimental Design and Analysis Approach to Model Pressure and Temperature Effects in Hypersonic Wind Tunnel Research

    Science.gov (United States)

    Lynn, Keith C.; Commo, Sean A.; Johnson, Thomas H.; Parker, Peter A,

    2011-01-01

    Wind tunnel research at NASA Langley Research Center s 31-inch Mach 10 hypersonic facility utilized a 5-component force balance, which provided a pressurized flow-thru capability to the test article. The goal of the research was to determine the interaction effects between the free-stream flow and the exit flow from the reaction control system on the Mars Science Laboratory aeroshell during planetary entry. In the wind tunnel, the balance was exposed to aerodynamic forces and moments, steady-state and transient thermal gradients, and various internal balance cavity pressures. Historically, these effects on force measurement accuracy have not been fully characterized due to limitations in the calibration apparatus. A statistically designed experiment was developed to adequately characterize the behavior of the balance over the expected wind tunnel operating ranges (forces/moments, temperatures, and pressures). The experimental design was based on a Taylor-series expansion in the seven factors for the mathematical models. Model inversion was required to calculate the aerodynamic forces and moments as a function of the strain-gage readings. Details regarding transducer on-board compensation techniques, experimental design development, mathematical modeling, and wind tunnel data reduction are included in this paper.

  1. Ionic wind generation by a wire-cylinder-plate corona discharge in air at atmospheric pressure

    Science.gov (United States)

    Colas, Dorian F.; Ferret, Antoine; Pai, David Z.; Lacoste, Deanna A.; Laux, Christophe O.

    2010-11-01

    A wire-cylinder-plate electrode configuration is presented to generate ionic wind with a dc corona discharge in air at atmospheric pressure. The objective of the work is to maximize the power supplied to the flow in order to increase acceleration while avoiding breakdown. Thus, the proposed experimental setup addresses the problem of decoupling the mechanism of ion generation from that of ion acceleration. Using a wire-plate configuration as a reference, we have focused on improving the topography of the electric field to (1) separate the ionization and acceleration zones in space, and (2) guide the trajectory of charged particles as parallel to the median axis as possible. In the proposed wire-cylinder-plate setup, a dc corona discharge is generated in the space between a wire and two cylinders. The ions produced by the corona then drift past the cylinders and into a channel between two plates, where they undergo acceleration. To maximize the ionic wind it is found that the geometric configuration must be as compact as possible and that the voltage applied must be right below breakdown. Experimentally, the optimized wire-plate reference setup provides a maximum flow velocity of 8 m s-1, a flow rate per unit electrode length of 0.034 m2 s-1, and a thrust per unit electrode length of 0.24 N m-1. The wire-cylinder-plate configuration provides a maximum flow velocity of 10 m s-1, a flow rate per unit electrode length of 0.041 m2 s-1, and a thrust per unit electrode length of 0.35 N m-1. This 46% increase in thrust is obtained by increasing the electric power per unit electrode length by only 16% (from 175 to 210 W m-1), which confirms the gain in efficiency obtained with the decoupled system. In comparison with a simple wire-wire corona configuration, the wire-cylinder-plate configuration increases the ionic wind velocity by up to a factor of 3, and the thrust by an order of magnitude.

  2. Design and analysis of hydraulic ram water pumping system

    Science.gov (United States)

    Hussin, N. S. M.; Gamil, S. A.; Amin, N. A. M.; Safar, M. J. A.; Majid, M. S. A.; Kazim, M. N. F. M.; Nasir, N. F. M.

    2017-10-01

    The current pumping system (DC water pump) for agriculture is powered by household electricity, therefore, the cost of electricity will be increased due to the higher electricity consumption. In addition, the water needs to be supplied at different height of trees and different places that are far from the water source. The existing DC water pump can pump the water to 1.5 m height but it cost money for electrical source. The hydraulic ram is a mechanical water pump that suitable used for agriculture purpose. It can be a good substitute for DC water pump in agriculture use. The hydraulic ram water pumping system has ability to pump water using gravitational energy or the kinetic energy through flowing source of water. This project aims to analyze and develop the water ram pump in order to meet the desired delivery head up to 3 meter height with less operation cost. The hydraulic ram is designed using CATIA software. Simulation work has been done using ANSYS CFX software to validate the working concept. There are three design were tested in the experiment study. The best design reached target head of 3 m with 15% efficiency and flow rate of 11.82l/min. The results from this study show that the less diameter of pressure chamber and higher supply head will create higher pressure.

  3. Simulation of Time-Varying Spatially Uniform Pressure and Near-Surface Wind Flows on Building Components and Cladding

    Directory of Open Access Journals (Sweden)

    Seraphy Y. Shen

    2017-05-01

    Full Text Available This paper describes a new full-scale (FS testing apparatus for conducting performance evaluations of FS building envelope systems. The simulator can generate spatially uniform, time-varying pressure conditions associated with Saffir–Simpson Hurricane Wind Scale Category 5 winds while compensating for large air leakage through the specimen and also operate a high-speed wind tunnel, both with dynamic control. This paper presents system details, operating characteristics, and an early case study on the performance of large sectional door systems under wind pressure loading. Failure mechanisms are discussed, and finite element modeling is validated for two specimens. It demonstrates successful dynamic load control for large component and cladding systems, as well as simulation of flows near the building surface. These capabilities serve to complement other FS wind tunnel facilities by offering tools to generate ultimate load conditions on portions of the building. Further, the paper successfully demonstrates the utility of combining physical testing and computational analysis as a matter of routine, which underscores the potential of evolving FS testing to encompass cyber–physical approaches.

  4. Using Atmospheric Pressure Tendency to Optimise Battery Charging in Off-Grid Hybrid Wind-Diesel Systems for Telecoms

    Directory of Open Access Journals (Sweden)

    Stephen Daniels

    2013-06-01

    Full Text Available Off grid telecom base stations in developing nations are powered by diesel generators. They are typically oversized and run at a fraction of their rated load for most of their operating lifetime. Running generators at partial load is inefficient and, over time, physically damages the engine. A hybrid configuration uses a battery bank, which powers the telecoms’ load for a portion of the time. The generator only operates when the battery bank needs to be charged. Adding a wind turbine further reduces the generator run hours and saves fuel. The generator is oblivious to the current wind conditions, which leads to simultaneous generator-wind power production. As the batteries become charged by the generator, the wind turbine controller is forced to dump surplus power as heat through a resistive load. This paper details how the relationship between barometric pressure and wind speed can be used to add intelligence to the battery charger. A Simulink model of the system is developed to test the different battery charging configurations. This paper demonstrates that if the battery charger is aware of upcoming wind conditions, it will provide modest fuel savings and reduce generator run hours in small-scale hybrid energy systems.

  5. Features of energetic particle radial profiles inferred from geosynchronous responses to solar wind dynamic pressure enhancements

    Directory of Open Access Journals (Sweden)

    Y. Shi

    2009-02-01

    Full Text Available Determination of the radial profile of phase space density of relativistic electrons at constant adiabatic invariants is crucial for identifying the source for them within the outer radiation belt. The commonly used method is to convert flux observed at fixed energy to phase space density at constant first, second and third adiabatic invariants, which requires an empirical global magnetic field model and thus might produce some uncertainties in the final results. From a different perspective, in this paper we indirectly infer the shape of the radial profile of phase space density of relativistic electrons near the geosynchronous region by statistically examining the geosynchronous energetic flux response to 128 solar wind dynamic pressure enhancements during the years 2000 to 2003. We thus avoid the disadvantage of using empirical magnetic field models. Our results show that the flux response is species and energy dependent. For protons and low-energy electrons, the primary response to magnetospheric compression is an increase in flux at geosynchronous orbit. For relativistic electrons, the dominant response is a decrease in flux, which implies that the phase space density decreases toward increasing radial distance at geosynchronous orbit and leads to a local peak inside of geosynchronous orbit. The flux response of protons and non-relativistic electrons could result from a phase density that increases toward increasing radial distance, but this cannot be determined for sure due to the particle energization associated with pressure enhancements. Our results for relativistic electrons are consistent with previous results obtained using magnetic field models, thus providing additional confirmation that these results are correct and indicating that they are not the result of errors in their selected magnetic field model.

  6. Composite Behavior of Insulated Concrete Sandwich Wall Panels Subjected to Wind Pressure and Suction.

    Science.gov (United States)

    Choi, Insub; Kim, JunHee; Kim, Ho-Ryong

    2015-03-19

    A full-scale experimental test was conducted to analyze the composite behavior of insulated concrete sandwich wall panels (ICSWPs) subjected to wind pressure and suction. The experimental program was composed of three groups of ICSWP specimens, each with a different type of insulation and number of glass-fiber-reinforced polymer (GFRP) shear grids. The degree of composite action of each specimen was analyzed according to the load direction, type of the insulation, and number of GFRP shear grids by comparing the theoretical and experimental values. The failure modes of the ICSWPs were compared to investigate the effect of bonds according to the load direction and type of insulation. Bonds based on insulation absorptiveness were effective to result in the composite behavior of ICSWP under positive loading tests only, while bonds based on insulation surface roughness were effective under both positive and negative loading tests. Therefore, the composite behavior based on surface roughness can be applied to the calculation of the design strength of ICSWPs with continuous GFRP shear connectors.

  7. Composite Behavior of Insulated Concrete Sandwich Wall Panels Subjected to Wind Pressure and Suction

    Directory of Open Access Journals (Sweden)

    Insub Choi

    2015-03-01

    Full Text Available A full-scale experimental test was conducted to analyze the composite behavior of insulated concrete sandwich wall panels (ICSWPs subjected to wind pressure and suction. The experimental program was composed of three groups of ICSWP specimens, each with a different type of insulation and number of glass-fiber-reinforced polymer (GFRP shear grids. The degree of composite action of each specimen was analyzed according to the load direction, type of the insulation, and number of GFRP shear grids by comparing the theoretical and experimental values. The failure modes of the ICSWPs were compared to investigate the effect of bonds according to the load direction and type of insulation. Bonds based on insulation absorptiveness were effective to result in the composite behavior of ICSWP under positive loading tests only, while bonds based on insulation surface roughness were effective under both positive and negative loading tests. Therefore, the composite behavior based on surface roughness can be applied to the calculation of the design strength of ICSWPs with continuous GFRP shear connectors.

  8. Single-sided natural ventilation driven by wind pressure and temperature difference

    DEFF Research Database (Denmark)

    Larsen, Tine Steen; Heiselberg, Per

    2008-01-01

    Even though opening a window for ventilation of a room seems very simple, the flow that occurs in this situation is rather complicated. The amount of air going through the window opening will depend on the wind speed near the building, the temperatures inside and outside the room, the wind direct...... on the ratio between the forces and the wind direction. This change is also found in the velocity profiles measured in the opening, which might change from wind dominated to temperature dominated under the same wind direction but with increasing temperature difference.......Even though opening a window for ventilation of a room seems very simple, the flow that occurs in this situation is rather complicated. The amount of air going through the window opening will depend on the wind speed near the building, the temperatures inside and outside the room, the wind......-scale wind tunnel experiments have been made with the aim of making a new expression for calculation of the airflow rate in single-sided natural ventilation. During the wind tunnel experiments it was found that the dominating driving force differs between wind speed and temperature difference depending...

  9. Study of dust re-suspension at low pressure in a dedicated wind-tunnel

    Science.gov (United States)

    Rondeau, Anthony; Sabroux, Jean-Christophe; Chassefière, Eric

    2015-04-01

    The atmosphere of several telluric planets or satellites are dusty. Such is the case of Earth, Venus, Mars and Titan, each bearing different aeolian processes linked principally to the kinematic viscosity of the near-surface atmosphere. Studies of the Martian atmosphere are particularly relevant for the understanding of the dust re-suspension phenomena at low pressure (7 mbar). It turns out that operation of fusion reactors of the tokamak design produces significant amount of dust through the erosion of plasma-facing components. Such dust is a key issue, both regarding the performance and the safety of a fusion reactor such as ITER, under construction in Cadarache, France. Indeed, to evaluate the explosion risk in the ITER fusion reactor, it is essential to quantify the re-suspended dust fraction as a function of the dust inventory that can be potentially mobilized during a loss of vacuum accident (LOVA), with air or water vapour ingress. A complete accident sequence will encompass dust re-suspension from near-vacuum up to atmospheric pressure. Here, we present experimental results of particles re-suspension fractions measured at 1000, 600 and 300 mbar in the IRSN BISE (BlowIng facility for airborne releaSE) wind tunnel. Both dust monolayer deposits and multilayer deposits were investigated. In order to obtain experimental re-suspension data of dust monolayer deposits, we used an optical microscope allowing to measure the re-suspended particles fraction by size intervals of 1 µm. The deposits were made up of tungsten particles on a tungsten surface (an ubiquitous plasma facing component) and alumina particles on a glass plate, as a surrogate. A comparison of the results with the so-called Rock'nRoll dust re-suspension model (Reeks and Hall, 2001) is presented and discussed. The multilayer deposits were made in a vacuum sedimentation chamber allowing to obtain uniform deposits in terms of thickness. The re-suspension experimental data of such deposits were obtained

  10. Efficacy of spatial averaging of infrasonic pressure in varying wind speeds

    International Nuclear Information System (INIS)

    DeWolf, Scott; Walker, Kristoffer T.; Zumberge, Mark A.; Denis, Stephane

    2013-01-01

    Wind noise reduction (WNR) is important in the measurement of infra-sound. Spatial averaging theory led to the development of rosette pipe arrays. The efficacy of rosettes decreases with increasing wind speed and only provides a maximum of 20 dB WNR due to a maximum size limitation. An Optical Fiber Infra-sound Sensor (OFIS) reduces wind noise by instantaneously averaging infra-sound along the sensor's length. In this study two experiments quantify the WNR achieved by rosettes and OFISs of various sizes and configurations. Specifically, it is shown that the WNR for a circular OFIS 18 m in diameter is the same as a collocated 32-inlet pipe array of the same diameter. However, linear OFISs ranging in length from 30 to 270 m provide a WNR of up to 30 dB in winds up to 5 m/s. The measured WNR is a logarithmic function of the OFIS length and depends on the orientation of the OFIS with respect to wind direction. OFISs oriented parallel to the wind direction achieve 4 dB greater WNR than those oriented perpendicular to the wind. Analytical models for the rosette and OFIS are developed that predict the general observed relationships between wind noise reduction, frequency, and wind speed. (authors)

  11. Research on a new fiber-optic axial pressure sensor of transformer winding based on fiber Bragg grating

    Science.gov (United States)

    Liu, Yuan; Li, Lianqing; Zhao, Lin; Wang, Jiqiang; Liu, Tongyu

    2017-12-01

    Based on the principle of the fiber Bragg grating, a new type of fiber-optic pressure sensor for axial force measurement of transformer winding is designed, which is designed with the structure of bending plate beam, the optimization of the packaging process, and material of the sensor. Through the calibration experiment to calibrate the sensor, the field test results of the Taikai transformer factory show that the sensitivity of the sensor is 0.133 pm/kPa and the repeatability error is 2.7% FS. The data of the fiber-optic pressure sensor in different positions maintain consistent and repeatable, which can meet the requirement of the real-time monitoring of the axial force of transformer winding.

  12. Analysis on atmospheric pressure, temperature, and wind speed profiles during total solar eclipse 9 March 2016 using time series clustering

    Science.gov (United States)

    Septem Riza, Lala; Wihardi, Yaya; Nurdin, Enjang Ali; Dwi Ardi, Nanang; Puji Asmoro, Cahyo; Wijaya, Agus Fany Chandra; Aria Utama, Judhistira; Bayu Dani Nandiyanto, Asep

    2016-11-01

    Air temperature, pressure, and wind speed measurements on the surface taken during the Total Solar Eclipse (TSE) of March 9, 2016, are made. They were taken in Terentang Beach, Bangka Island, Indonesia. In this paper, we propose to analyze them by using time series clustering. The following steps are conducted: data collecting, splitting, smoothing, distance calculation, and clustering. The final results show cluster memberships of the three parameters on 3 time frames: one day before, the TSE day, and one day after. After doing some simulations, it can be seen that the profiles of temperature and pressure on the TSE day are on the same cluster while the wind-speed profile on the TSE day is the same as on the one day after.

  13. The Effects of Solar Wind Dynamic Pressure Changes on the Substorm Auroras and Energetic Electron Injections on 24 August 2005

    Science.gov (United States)

    Li, L. Y.; Wang, Z. Q.

    2018-01-01

    After the passage of an interplanetary (IP) shock at 06:13 UT on 24 August 2005, the enhancement (>6 nPa) of solar wind dynamic pressure and the southward turning of interplanetary magnetic field (IMF) cause the earthward movement of dayside magnetopause and the drift loss of energetic particles near geosynchronous orbit. The persistent electron drift loss makes the geosynchronous satellites cannot observe the substorm electron injection phenomenon during the two substorm expansion phases (06:57-07:39 UT) on that day. Behind the IP shock, the fluctuations ( 0.5-3 nPa) of solar wind dynamic pressure not only alter the dayside auroral brightness but also cause the entire auroral oval to swing in the day-night direction. However, there is no Pi2 pulsation in the nightside auroral oval during the substorm growth phase from 06:13 to 06:57 UT. During the subsequent two substorm expansion phases, the substorm expansion activities cause the nightside aurora oval brightening from substorm onset site to higher latitudes, and meanwhile, the enhancement (decline) of solar wind dynamic pressure makes the nightside auroral oval move toward the magnetic equator (the magnetic pole). These observations demonstrate that solar wind dynamic pressure changes and substorm expansion activities can jointly control the luminosity and location of the nightside auroral oval when the internal and external disturbances occur simultaneously. During the impact of a strong IP shock, the earthward movement of dayside magnetopause probably causes the disappearance of the substorm electron injections near geosynchronous orbit.

  14. On the motion of dayside auroras caused by a solar wind pressure pulse

    Directory of Open Access Journals (Sweden)

    A. Kozlovsky

    2005-02-01

    Full Text Available Global ultraviolet auroral images from the IMAGE satellite were used to investigate the dynamics of the dayside auroral oval responding to a sudden impulse (SI in the solar wind pressure. At the same time, the TV all-sky camera and the EISCAT radar on Svalbard (in the pre-noon sector allowed for detailed investigation of the auroral forms and the ionospheric plasma flow. After the SI, new discrete auroral forms appeared in the poleward part of the auroral oval so that the middle of the dayside oval moved poleward from about 70° to about 73° of the AACGM latitude. This poleward shift first occurred in the 15 MLT sector, then similar shifts were observed in the MLT sectors located more westerly, and eventually the shift was seen in the 6 MLT sector. Thus, the auroral disturbance "propagated" westward (from 15 MLT to 6 MLT at an apparent speed of the order of 7km/s. This motion of the middle of the auroral oval was caused by the redistribution of the luminosity within the oval and was not associated with the corresponding motion of the poleward boundary of the oval. The SI was followed by an increase in the northward plasma convection velocity. Individual auroral forms showed poleward progressions with velocities close to the velocity of the northward plasma convection. The observations indicate firstly a pressure disturbance propagation through the magnetosphere at a velocity of the order of 200km/s which is essentially slower than the velocity of the fast Alfvén (magnetosonic wave, and secondly a potential (curl-free electric field generation behind the front of the propagating disturbance, causing the motion of the auroras. We suggest a physical explanation for the slow propagation of the disturbance through the magnetosphere and a model for the electric field generation. Predictions of the model are supported by the global convection maps produced by the SuperDARN HF radars. Finally, the interchange instability and the eigenmode toroidal

  15. Perfectly Secure Oblivious RAM without Random Oracles

    DEFF Research Database (Denmark)

    Damgård, Ivan Bjerre; Meldgaard, Sigurd Torkel; Nielsen, Jesper Buus

    2011-01-01

    We present an algorithm for implementing a secure oblivious RAM where the access pattern is perfectly hidden in the information theoretic sense, without assuming that the CPU has access to a random oracle. In addition we prove a lower bound on the amount of randomness needed for implementing...... an information theoretically secure oblivious RAM....

  16. Ram Ramaswamy | Speakers | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Ram Ramaswamy. Prof. Ram Ramaswamy. School of Physical Sciences, JNU, New Delhi 110 067. Email: r.ramaswamy@gmail.com, ramaswamy@jnu.ac.in. Ramakrishna Ramaswamy, School of Physical Sciences, JNU, New Delhi, is President of Indian Academy of Sciences (2016-18). Ramaswamy's research interests ...

  17. Fast Responding Pressure-Sensitive Paint for Large-Scale Wind Tunnel Testing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed work focuses on implementing fast-response pressure-sensitive paint for measurements of unsteady pressure in rotorcraft applications. Significant...

  18. Base Pressure Computations of the DERA Generic Missile Wind Tunnel Model

    National Research Council Canada - National Science Library

    DeSpirito, James

    2005-01-01

    .... The investigation was an extension to a previous investigation in which the computed forebody axial force did not compare well with experimental wind tunnel data, while all other forces and moments...

  19. Inverse measurement of wall pressure field in flexible-wall wind tunnels using global wall deformation data

    Science.gov (United States)

    Brown, Kenneth; Brown, Julian; Patil, Mayuresh; Devenport, William

    2018-02-01

    The Kevlar-wall anechoic wind tunnel offers great value to the aeroacoustics research community, affording the capability to make simultaneous aeroacoustic and aerodynamic measurements. While the aeroacoustic potential of the Kevlar-wall test section is already being leveraged, the aerodynamic capability of these test sections is still to be fully realized. The flexibility of the Kevlar walls suggests the possibility that the internal test section flow may be characterized by precisely measuring small deflections of the flexible walls. Treating the Kevlar fabric walls as tensioned membranes with known pre-tension and material properties, an inverse stress problem arises where the pressure distribution over the wall is sought as a function of the measured wall deflection. Experimental wall deformations produced by the wind loading of an airfoil model are measured using digital image correlation and subsequently projected onto polynomial basis functions which have been formulated to mitigate the impact of measurement noise based on a finite-element study. Inserting analytic derivatives of the basis functions into the equilibrium relations for a membrane, full-field pressure distributions across the Kevlar walls are computed. These inversely calculated pressures, after being validated against an independent measurement technique, can then be integrated along the length of the test section to give the sectional lift of the airfoil. Notably, these first-time results are achieved with a non-contact technique and in an anechoic environment.

  20. On Kinetic Slow Modes, Fluid Slow Modes, and Pressure-balanced Structures in the Solar Wind

    International Nuclear Information System (INIS)

    Verscharen, Daniel; Chen, Christopher H. K.; Wicks, Robert T.

    2017-01-01

    Observations in the solar wind suggest that the compressive component of inertial-range solar-wind turbulence is dominated by slow modes. The low collisionality of the solar wind allows for nonthermal features to survive, which suggests the requirement of a kinetic plasma description. The least-damped kinetic slow mode is associated with the ion-acoustic (IA) wave and a nonpropagating (NP) mode. We derive analytical expressions for the IA-wave dispersion relation in an anisotropic plasma in the framework of gyrokinetics and then compare them to fully kinetic numerical calculations, results from two-fluid theory, and magnetohydrodynamics (MHD). This comparison shows major discrepancies in the predicted wave phase speeds from MHD and kinetic theory at moderate to high β . MHD and kinetic theory also dictate that all plasma normal modes exhibit a unique signature in terms of their polarization. We quantify the relative amplitude of fluctuations in the three lowest particle velocity moments associated with IA and NP modes in the gyrokinetic limit and compare these predictions with MHD results and in situ observations of the solar-wind turbulence. The agreement between the observations of the wave polarization and our MHD predictions is better than the kinetic predictions, which suggests that the plasma behaves more like a fluid in the solar wind than expected.

  1. Pressure integration technique for predicting wind-induced response in high-rise buildings

    Directory of Open Access Journals (Sweden)

    Aly Mousaad Aly

    2013-12-01

    Full Text Available This paper presents a procedure for response prediction in high-rise buildings under wind loads. The procedure is illustrated in an application example of a tall building exposed to both cross-wind and along-wind loads. The responses of the building in the lateral directions combined with torsion are estimated simultaneously. Results show good agreement with recent design standards; however, the proposed procedure has the advantages of accounting for complex mode shapes, non-uniform mass distribution, and interference effects from the surrounding. In addition, the technique allows for the contribution of higher modes. For accurate estimation of the acceleration response, it is important to consider not only the first two lateral vibrational modes, but also higher modes. Ignoring the contribution of higher modes may lead to underestimation of the acceleration response; on the other hand, it could result in overestimation of the displacement response. Furthermore, the procedure presented in this study can help decision makers, involved in a tall building design/retrofit to choose among innovative solutions like aerodynamic mitigation, structural member size adjustment, damping enhancement, and/or materials change, with an objective to improve the resiliency and the serviceability under extreme wind actions.

  2. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...... pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations...... induced by wind turbulence, vortex shedding, flutter and galloping. The book gives a comprehensive treatment of wind effects on structures and it will be useful for consulting engineers designing wind-sensitive structures. It will also be valuable for students of civil engineering as textbook...

  3. Pressure-Sensitive Paint Measurements on the NASA Common Research Model in the NASA 11-ft Transonic Wind Tunnel

    Science.gov (United States)

    Bell, James H.

    2011-01-01

    The luminescence lifetime technique was used to make pressure-sensitive paint (PSP) measurements on a 2.7% Common Research Model in the NASA Ames 11ft Transonic Wind Tunnel. PSP data were obtained on the upper and lower surfaces of the wing and horizontal tail, as well as one side of the fuselage. Data were taken for several model attitudes of interest at Mach numbers between 0.70 and 0.87. Image data were mapped onto a three-dimensional surface grid suitable both for comparison with CFD and for integration of pressures to determine loads. Luminescence lifetime measurements were made using strobed LED (light-emitting diode) lamps to illuminate the PSP and fast-framing interline transfer cameras to acquire the PSP emission.

  4. Analysis of Fluctuating Static Pressure Measurements in a Large High Reynolds Number Transonic Cryogenic Wind Tunnel. Ph.D. Thesis

    Science.gov (United States)

    Igoe, William B.

    1991-01-01

    Dynamic measurements of fluctuating static pressure levels were made using flush mounted high frequency response pressure transducers at eleven locations in the circuit of the National Transonic Facility (NTF) over the complete operating range of this wind tunnel. Measurements were made at test section Mach numbers from 0.2 to 1.2, at pressure from 1 to 8.6 atmospheres and at temperatures from ambient to -250 F, resulting in dynamic flow disturbance measurements at the highest Reynolds numbers available in a transonic ground test facility. Tests were also made independently at variable Mach number, variable Reynolds number, and variable drivepower, each time keeping the other two variables constant thus allowing for the first time, a distinct separation of these three important variables. A description of the NTF emphasizing its flow quality features, details on the calibration of the instrumentation, results of measurements with the test section slots covered, downstream choke, effects of liquid nitrogen injection and gaseous nitrogen venting, comparisons between air and nitrogen, isolation of the effects of Mach number, Reynolds number, and fan drive power, and identification of the sources of significant flow disturbances is included. The results indicate that primary sources of flow disturbance in the NTF may be edge-tones generated by test section sidewall re-entry flaps and the venting of nitrogen gas from the return leg of the tunnel circuit between turns 3 and 4 in the cryogenic mode of operation. The tests to isolate the effects of Mach number, Reynolds number, and drive power indicate that Mach number effects predominate. A comparison with other transonic wind tunnels shows that the NTF has low levels of test section fluctuating static pressure especially in the high subsonic Mach number range from 0.7 to 0.9.

  5. RAMS (Risk Analysis - Modular System) methodology

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, R.D.; Strenge, D.L.; Buck, J.W. [and others

    1996-10-01

    The Risk Analysis - Modular System (RAMS) was developed to serve as a broad scope risk analysis tool for the Risk Assessment of the Hanford Mission (RAHM) studies. The RAHM element provides risk analysis support for Hanford Strategic Analysis and Mission Planning activities. The RAHM also provides risk analysis support for the Hanford 10-Year Plan development activities. The RAMS tool draws from a collection of specifically designed databases and modular risk analysis methodologies and models. RAMS is a flexible modular system that can be focused on targeted risk analysis needs. It is specifically designed to address risks associated with overall strategy, technical alternative, and `what if` questions regarding the Hanford cleanup mission. RAMS is set up to address both near-term and long-term risk issues. Consistency is very important for any comparative risk analysis, and RAMS is designed to efficiently and consistently compare risks and produce risk reduction estimates. There is a wide range of output information that can be generated by RAMS. These outputs can be detailed by individual contaminants, waste forms, transport pathways, exposure scenarios, individuals, populations, etc. However, they can also be in rolled-up form to support high-level strategy decisions.

  6. Structure of Mercury's magnetosphere for different pressure of the solar wind: Three dimensional hybrid simulations

    Czech Academy of Sciences Publication Activity Database

    Trávníček, Pavel; Hellinger, Petr; Schriver, D.

    2007-01-01

    Roč. 34, č. 5 (2007), L05104/1-L05104/5 ISSN 0094-8276 R&D Projects: GA ČR GA205/05/1011 Institutional research plan: CEZ:AV0Z30420517 Keywords : Global simulations * Mercury's magnetosphere * solar wind * hybrid simulations * ion drift driven rings Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.744, year: 2007

  7. Experimental and Simulation Studies of Strength and Fracture Behaviors of Wind Turbine Bearing Steel Processed by High Pressure Torsion

    Directory of Open Access Journals (Sweden)

    Ning Wang

    2016-12-01

    Full Text Available White structure flaking (WSF has been found to be one of the failure modes in bearing steels under rolling contacts through the formation of cracks associated with a microstructural change called white etching area (WEA. In the present research, the effects of the high-pressure torsion (HPT process on the microstructure and mechanical properties of an AISI 52100 alloy are studied. An annealed AISI 52100 was subjected to high-pressure torsion at room temperature under a pressure of up to ~6 GPa for up to three turns. Finite-element modeling (FEM was used to simulate the process under high-pressure torsion and quasi-constrained conditions to reveal the material property changes occurring in HPT. Scanning electron microscopy and microhardness testing after processing were used to investigate the microstructural and mechanical property evolution of the steel. Strain induced microstructural transformations occur and affect the mechanical properties in a similar way to the well-known white etching area (WEA found beneath the surface of wind turbine bearings. Here, HPT is used to study the feasibility of creating microstructural changes that are similar to WEA. This paper presents the preliminary results of using HPT to produce WEAs.

  8. Real gas effects on the prediction of ram accelerator performance

    Science.gov (United States)

    Bauer, P.; Knowlen, C.; Bruckner, A.

    The analysis of ram accelerator performance is based on one-dimensional modelling of the flow process that propels the projectile. The conservation equations are applied to a control volume travelling with the projectile, and quasi-steady flow is assumed. To date the solution obtained, namely the generalized thrust equation, has been based on the ideal gas assumption. At the high level of pressure that is encountered during the ram accelerator process, this assumption cannot be regarded as adequate. Thus, a more appropriate equation of state (EOS) should be used instead. Depending upon the level of pressure, several equations of state are available for dense gaseous energetic materials. The virial type of EOS can be more or less sophisticated, depending upon the extent of complexity of the intermolecular modelling, and turns out to be totally appropriate for most gaseous explosive mixtures that have been investigated at moderate initial pressures, i.e., less than 10MPa. In the present case the Boltzmann EOS was applied. It is based on very simplified molecular interactions, which makes it relatively easy to use in calculations. Moreover, the energetic EOS needs to be taken into account. This concerns all the calorimetric coefficients, as well as the thermodynamic parameters, which can no longer be expressed as only a function of temperature. The higher the pressure level, the more sophisticated these corrections become, but the main relationships that account for real gas effects are basically the same. These include the use of a general form of analytical operators applied to correct the thermodynamic functions and coefficients. The equations governing the one-dimensional model were taken as a basis for the real gas corrections and were solved analytically. The parameters which play the most crucial roles in this correction can thus be highlighted. A complete set of equations involving the real gas effects are presented in this paper. The QUARTET code was used in

  9. Influence of placement and height of high-rise buildings on wind pressure distribution and natural ventilation of low- and medium-rise buildings

    Czech Academy of Sciences Publication Activity Database

    Kuznetsov, Sergeii; Butova, A.; Pospíšil, Stanislav

    2016-01-01

    Roč. 15, 3/4 (2016), s. 253-266 ISSN 1473-3315 R&D Projects: GA ČR(CZ) GA14-12892S; GA MŠk(CZ) LO1219 Keywords : natural ventilation * high-rise buildings * low- and medium-rise buildings * wind pressure coefficient * wind tunnel tests Subject RIV: JM - Building Engineering Impact factor: 0.391, year: 2016 http://www.tandfonline.com/doi/full/10.1080/14733315.2016.1214396

  10. Linear prediction studies for the solar wind and Saturn kilometric radiation

    Directory of Open Access Journals (Sweden)

    U. Taubenschuss

    2006-11-01

    Full Text Available The external control of Saturn kilometric radiation (SKR by the solar wind has been investigated in the frame of the Linear Prediction Theory (LPT. The LPT establishes a linear filter function on the basis of correlations between input signals, i.e. time profiles for solar wind parameters, and output signals, i.e. time profiles for SKR intensity. Three different experiments onboard the Cassini spacecraft (RPWS, MAG and CAPS yield appropriate data sets for compiling the various input and output signals. The time period investigated ranges from DOY 202 to 326, 2004 and is only limited due to limited availability of CAPS plasma data for the solar wind. During this time Cassini was positioned mainly on the morning side on its orbit around Saturn at low southern latitudes. Four basic solar wind quantities have been found to exert a clear influence on the SKR intensity profile. These quantities are: the solar wind bulk velocity, the solar wind ram pressure, the magnetic field strength of the interplanetary magnetic field (IMF and the y-component of the IMF. All four inputs exhibit nearly the same level of efficiency for the linear prediction indicating that all four inputs are possible drivers for triggering SKR. Furthermore, they act at completely different lag times ranging from ~13 h for the ram pressure to ~52 h for the bulk velocity. The lag time for the magnetic field strength is usually beyond ~40 h and the lag time for the y-component of the magnetic field is located around 30 h. Considering that all four solar wind quantities are interrelated in a corotating interaction region, only the influence of the ram pressure seems to be of reasonable relevance. An increase in ram pressure causes a substantial compression of Saturn's magnetosphere leading to tail collapse, injection of hot plasma from the tail into the outer magnetosphere and finally to an intensification of auroral dynamics and SKR emission. So, after the onset of magnetospheric

  11. Fast Pressure-Sensitive Paint System for Production Wind Tunnel Testing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Significant advances in the use of fast responding Pressure-Sensitive Paint have recently been achieved as demonstrated by a multi-camera fast PSP test conducted in...

  12. Single-sided Natural Ventilation Driven by a Combination of Wind Pressure and Temperature Difference

    DEFF Research Database (Denmark)

    Larsen, Tine Steen; Heiselberg, Per

    2007-01-01

    . In both situations the aim is to obtain a good indoor environment but to control the amount of air, some basic knowledge of the flow through an opening is necessary. The amount of air going through the window opening in single-sided ventilation will depend on the wind speed near the building......Natural ventilation is a commonly used principle when ventilation systems for buildings are designed. The ventilation can either be obtained by automatically controlled openings in the building envelope, or it can just be the simple action of opening a door or a window to let the fresh air in...

  13. Influence of surface rectangular defect winding layer on burst pressure of CNG-II composite cylinder

    Science.gov (United States)

    You, H. X.; Peng, L.; Zhao, C.; Ma, K.; Zhang, S.

    2018-01-01

    To study the influence of composite materials’ surface defect on the burst pressure of CNG-II composite cylinder, the surface defect was simplified as a rectangular slot of certain size on the basis of actually investigating the shape of cylinder’s surface defect. A CNG-II composite cylinder with a rectangular slot defect (2mm in depth) was used for burst test, and the numerical simulation software ANSYS was used to calculate its burst pressure. Through comparison between the burst pressure in the test and the numerical analysis result, the correctness of the numerical analysis method was verified. On this basis, the numerical analysis method was conducted for composite cylinders with surface defect in other depth. The result showed that surface defect in the form of rectangular slot had no significant effect on the liner stress of composite cylinder. Instead, it had a great influence on the stress of fiber-wrapped layer. The burst pressure of the composite cylinder decreased as the defect depth increasing. The hoop stress at the bottom of the defect in the shape of rectangular slot exceeded the maximum of the composite materials’ tensile strength, which could result in the burst pressure of composite cylinders decreasing.

  14. Effects of Mie tip-vane on pressure distribution of rotor blade and power augmentation of horizontal axis wind turbine; Yokutan shoyoku Mie ben ni yoru suiheijiku fusha yokumenjo no atsuryoku bunpu no kaizen to seino kojo tono kankei

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Y.; Maeda, T.; Kamada, Y. [Mie Univ., Mie (Japan); Seto, H. [Mitsubishi Motors Corp., Tokyo (Japan)

    2000-04-01

    By recent developments of exclusive rotor blade, the efficiency of wind turbine is improved substantially. By measuring pressure on rotor blades of horizontal axis wind turbines rotating in wind tunnels, this report clarified relation between improvement of pressure distribution on main rotor blades by Mie vane and upgrade of wind turbine performance. The results under mentioned have been got by measuring pressure distribution on rotor blades, visualization by tuft, and measuring resistance of Mie vane. (1) The difference of pressure between suction surface and pressure surface on the end of rotor blade increase, and output power of wind turbine improves. (2) Vortex of blade end is inhibited by Mie vane. (3) The reason of reduction on wind turbine performance with Mie vane in aria of high rotating speed ratio is the increase of Mie vane flow resistance.(NEDO)

  15. Wireless data over RAM's Mobitex network

    Science.gov (United States)

    Khan, M. Mobeen

    1995-12-01

    Mobitex is a mobile data technology standard created by Eritel, now a wholly owned subsidiary of Ericsson, that has been in existence for about a decade. Originally designed as a low speed (1.2 kbps) data system with a voice dispatch overlay, it was significantly enhanced in 1990 for use in North America and the UK. The enhanced system is a data-only system using cellular architecture and multi-channel frequency reuse, store-and-forward capability, and an 8 kbps over-the-air data rate. The mission of RAM Mobile Data USA Limited Partnership ('RAM') is to provide high quality, cost efficient, wireless data communications solutions in its targeted market segments. RAM's Mobitex network is currently one of the two networks providing two way wireless data services nationwide using a long distance service provider of the customer's choice.

  16. Low frequency geomagnetic field fluctuations at low latitude during the passage of a higher pressure solar wind region

    Directory of Open Access Journals (Sweden)

    U. Villante

    1997-06-01

    Full Text Available The passage of a higher pressure solar wind region at the Earth's orbit marked the onset of low latitude (L=1.6 fluctuations in the frequency range (0.8–5.5 mHz for both the horizontal geomagnetic field components. Spectral peaks mostly occur at the same frequencies as the spectral enhancements which appeared in the long term analysis of experimental measurements from the same station and were tentatively interpreted in terms of ground signatures of global magnetospheric modes. A comparison with simultaneous observations discussed by previous investigations allows us to conclude that the same set of frequencies is enhanced in a wide portion of the Earth's magnetosphere.

  17. Tests of Round and Flat Spoilers on a Tapered Wing in the NACA 19-Foot Pressure Wind Tunnel

    Science.gov (United States)

    Wenzinger, Carl J; Bowen, John D

    1941-01-01

    Several arrangements of round and flat spanwise spoilers attached to the upper surface of a tapered wing were tested in the NACA 19-foot pressure wind tunnel to determine the most effective type, location, and size of spoiler necessary to reduce greatly the lift on the wings of large flying boats when moored. The effect of the various spoilers on the lift, the drag, and the pitching-moment characteristics of the tapered wing was measured over a range of angles of attack from zero to maximum lift. The most effective type of spoiler was found to be the flat type with no space between it and the wing surface. The chordwise location of such a spoiler was not critical within the range investigated, from 5 to 20 percent of the wing chord from the leading edge.

  18. Watching the wind: seismic data contamination at long-periods due to atmospheric pressure-field-induced tilting

    Science.gov (United States)

    de Angelis, S.; Bodin, P.; Hagel, K.; Fletcher, D.

    2010-12-01

    Long-period noise generated by the elastic response of the Earth to atmospheric pressure fluctuations has long been recognized as a limiting factor for seismic investigations. The quality of seismic data recorded by sensitive, near-surface broadband seismometers can be severely corrupted by this effect. During the recent installation of a new broadband site on the Olympic Peninsula in Washington, the Pacific Northwest Seismic Network recorded and investigated elevated daytime noise levels at periods exceeding 30 seconds. Substantial power spectral density variations of the background noise field, 15-20 dB, were observed in the horizontal component seismograms. The pattern of the long-period noise exhibited striking correlations with local fluctuations of the air temperature and wind speed as measured nearby the seismic station by the National Weather Service Forecast Office, Seattle, Washington, and the National Oceanic and Atmospheric Administration. Several past studies have demonstrated that local wind systems may lead to variations of the atmospheric pressure field that deform the ground and perturb seismograms. The rotational component of this motion is detected by horizontal-component seismometers because at periods longer than the sensor’s low corner frequency the sensor is acting essentially as a tiltmeter. We obtained a transfer function that describes the response of the broadband seismometer to a tilt step change and estimated the amplitude of tilt noise to be on the order of 10-9 - 10-8 radians. Within the seismic pass-band of the sensor, it is not possible to remove the tilt signal from the observed seismograms because the details of the tilting depend on the pressure field variations, the compliance of the near surface to pressure variations, and the design and construction of the seismometer vault itself. At longer periods, using the seismic data to recover tilts of tectonic origin is made challenging because of the needed instrument correction

  19. Sulfur recovery hiked in Claus/ Sulfreen units at Ram River

    Energy Technology Data Exchange (ETDEWEB)

    Coward, R.S.; Skaret, W.M.

    1985-04-08

    Extensive work at the Ram River gas plant has been directed at increasing sulfur-recovery efficiency. Recently, emphasis has been on reducing the emission contribution of COS/CS/sub 2/ and improving Sulfreen plant operation. In 1983, recovery efficiency reached 98.7%. Present contribution by residual sulfur components to plant emissions are: H/sub 2/S/SO/sub 2/ 39%, COS/CS/sub 2/ 28%, ratio upsets 17%, sulfur vapor 12%, and the Sulfreen regeneration process 4%. The Ram River plant processes sour natural gas from 12 different pools, with a maximum H/sub 2/S content of 39%. Inlet capacity is 17.7 million cu m/day of raw gas, with an output of 12 million cu m/day of sales gas, 300 cu m/day of pentanes plus, and 4,600 tons/day of sulfur from the diethanolamine (DEA) sweetening process. The plant facility comprises two stages, each consisting of two highpressure DEA gas sweetening trains, two 1,150-ton/day sulfur plants, a Sulfreen tail gas clean-up unit, and an incinerator. Effluent from both Sulfreen incinerators is released through a common stack. A low-pressure gas sweetening unit was added in 1980 to handle increased flash gas due to a 50% increase in the load on the high-pressure DEA units.

  20. Experimental and numerical investigation of ram extrusion of bread dough

    Science.gov (United States)

    Mohammed, M. A. P.; Wanigasooriya, L.; Charalambides, M. N.

    2016-10-01

    An experimental and numerical study on ram extrusion of bread dough was conducted. A laboratory ram extrusion rig was designed and manufactured, where dies with different angles and exit radii were employed. Rate dependent behaviour was observed from tests conducted at different extrusion speeds, and higher extrusion pressure was reported for dies with decreasing exit radius. A finite element simulation of extrusion was performed using the adaptive meshing technique in Abaqus. Simulations using a frictionless contact between the billet and die wall showed that the model underestimates the response at high entry angles. On the other hand, when the coefficient of friction value was set to 0.09 as measured from friction experiments, the dough response was overestimated, i.e. the model extrusion pressure was much higher than the experimentally measured values. When a critical shear stress limit, τmax, was used, the accuracy of the model predictions improved. The results showed that higher die angles require higher τmax values for the model and the experiments to agree.

  1. Weather and climate needs for Lidar observations from space and concepts for their realization. [wind, temperature, moisture, and pressure data needs

    Science.gov (United States)

    Atlas, D.; Korb, C. L.

    1980-01-01

    The spectrum of weather and climate needs for Lidar observations from space is discussed with emphasis on the requirements for wind, temperature, moisture, and pressure data. It is shown that winds are required to realistically depict all atmospheric scales in the tropics and the smaller scales at higher latitudes, where both temperature and wind profiles are necessary. The need for means to estimate air-sea exchanges of sensible and latent heat also is noted. A concept for achieving this through a combination of Lidar cloud top heights and IR cloud top temperatures of cloud streets formed during cold air outbreaks over the warmer ocean is outlined. Recent theoretical feasibility studies concerning the profiling of temperatures, pressure, and humidity by differential absorption Lidar (DIAL) from space and expected accuracies are reviewed. An alternative approach to Doppler Lidar wind measurements also is presented. The concept involves the measurement of the displacement of the aerosol backscatter pattern, at constant heights, between two successive scans of the same area, one ahead of the spacecraft and the other behind it a few minutes later. Finally, an integrated space Lidar system capable of measuring temperature, pressure, humidity, and winds which combines the DIAL methods with the aerosol pattern displacement concept is described.

  2. Characteristics of reproductive performance of Garut rams

    Directory of Open Access Journals (Sweden)

    Muhammad Rizal

    2003-06-01

    Full Text Available Basic information on reproductive potency of Garut rams is necessary in order to identify the capacity of rams in producing chilled or frozen semen. Eight Garut rams (three to five years old were used in this study. The male sexual behaviors were observed and semen was collected once a week using artificial vagina. Semen quality was evaluated and its potency to produce frozen semen was calculated. Results of this study indicated that first, second, and third ejaculations were at the 29, 87 and 176th seconds, respectively. Fresh semen volume, sperm concentration, motility, intact acrosomal cap, and intact plasma membrane were 0.99 ml, 3224 million/ml; 76.67; 86.13 and 87.73%, respectively. Protein value, fructose, vitamin C, vitamin E, sodiu, potassium, calcium, magnesium, phosphor, chloride, and mangan in seminal plasma of fresh semen were 4140, 180, 3.2, 24, 180, 117, 9, 6.12, 60, 104, and 5 mg/ml, respectively. Measurement of head length, width, and length of sperm tail were 6.59, 3.99, and 42.65 μm, respectively. Length and width measurement of right and left testes, and scrotal circumference were 12.71, 6.5, and 32.36 cm, respectively. Capacity of each Garut rams to produce frozen semen from three consecutive ejaculations are 35.88 mini straw with the cencentration of 200 million motile sperm per 0.25 ml.

  3. Orthogonal Range Searching on the RAM, Revisited

    DEFF Research Database (Denmark)

    Chan, Timothy M.; Larsen, Kasper Green; Patrascu, Mihai

    2011-01-01

    We present a number of new results on one of the most extensively studied topics in computational geometry, orthogonal range searching. All our results are in the standard word RAM model: We present two data structures for 2-d orthogonal range emptiness. The first achieves O(n lg lg n) space and O...

  4. Rumenolith formation in a Bapedi ram

    Directory of Open Access Journals (Sweden)

    Rhoda Leask

    2012-04-01

    Full Text Available During a routine flock visit, a farmer observed that one of the eight tooth Bapedi rams had been losing body condition despite being separated from the flock and fed supplementary feed. The ram’s body condition score was assessed as 2 out of 5 (one point less than the average of the rest of the rams and the teeth appeared normal with no excessive wear. The rumen was assessed by auscultation, palpation and ballottement where a foreign body (approximately 20 cm × 5 cm – 10 cm was clearly palpated and ballotted. A rumenotomy was performed and a large mass of tightly compacted foreign matter and plant material was removed. The mass consisted of synthetic fibre, plant material and calcium phosphate (50.5%. It appeared to have formed as the result of the ingestion of a synthetic fibre which formed the nidus of a concretion. This was probably the result of deficient nutrition, with the rams eating the synthetic fibre in an attempt to increase feed intake. The ram recovered uneventfully after the rumenotomy was performed and supplementary feeding.

  5. Using Oblivious RAM in Genomic Studies

    NARCIS (Netherlands)

    Karvelas, Nikolaos P.; Peter, Andreas; Katzenbeisser, Stefan; Garcia-Alfaro, Joaquin; Navarro-Aribas, Guillermo; Hartenstein, Hannes; Herrera-Joancomarti, Jordi

    2017-01-01

    Since the development of tree-based Oblivious RAMs by Shi et al. it has become apparent that privacy preserving outsourced storage can be practical. Although most current constructions follow a client-server model, in many applications, such as Genome Wide Association Studies (GWAS), it is desirable

  6. Impact of Mantle Wind on Subducting Plate Geometry and Interplate Pressure: Insights From Physical Modelling.

    Science.gov (United States)

    Boutelier, D.; Cruden, A. R.

    2005-12-01

    New physical models of subduction investigate the impact of large-scale mantle flow on the structure of the subducted slab and deformation of the downgoing and overriding plates. The experiments comprise two lithospheric plates made of highly filled silicone polymer resting on a model asthenosphere of low viscosity transparent silicone polymer. Subduction is driven by a piston that pushes the subducting plate at constant rate, a slab-pull force due to the relative density of the slab, and a basal drag force exerted by flow in the model asthenosphere. Large-scale mantle flow is imposed by a second piston moving at constant rate in a tunnel at the bottom of the experiment tank. Passive markers in the mantle track the evolution of flow during the experiment. Slab structure is recorded by side pictures of the experiment while horizontal deformation is studied via passive marker grids on top of both plates. The initial mantle flow direction beneath the overriding plate can be sub-horizontal or sub-vertical. In both cases, as the slab penetrates the mantle, the mantle flow pattern changes to accommodate the subducting high viscosity lithosphere. As the slab continues to descend, the imposed flow produces either over- or under-pressure on the lower surface of the slab depending on the initial mantle flow pattern (sub-horizontal or sub-vertical respectively). Over-pressure imposed on the slab lower surface promotes shallow dip subduction while under-pressure tends to steepen the slab. These effects resemble those observed in previous experiments when the overriding plate moves horizontally with respect to a static asthenosphere. Our experiments also demonstrate that a strong vertical drag force (due to relatively fast downward mantle flow) exerted on the slab results in a decrease in strain rate in both the downgoing and overriding plates, suggesting a decrease in interplate pressure. Furthermore, with an increase in drag force deformation in the downgoing plate can switch

  7. Semen Characteristics of the West African Dwarf Rams in The ...

    African Journals Online (AJOL)

    WAD) rams in Makurdi. Semen samples were collected from five rams twice a week by electroejaculation method over a period of two months (September to October). The ejaculate volume, concentration, mass activity, progressive motility, the ...

  8. Alpha particle induced soft errors in NMOS RAMs: a review

    International Nuclear Information System (INIS)

    Carter, P.M.; Wilkins, B.R.

    1987-01-01

    The paper aims to explain the alpha particle induced soft error phenomenon using the NMOS dynamic random access memory (RAM) as a model. It discusses some of the many techniques experimented with by manufacturers to overcome the problem, and gives a review of the literature covering most aspects of soft errors in dynamic RAMs. Finally, the soft error performance of current dynamic RAM and static RAM products from several manufacturers are compared. (author)

  9. Development of solar wind shock models with tensor plasma pressure for data analysis. Final technical report, 1 Aug 1970--31 Dec 1975

    International Nuclear Information System (INIS)

    Abraham-shrauner, B.

    1975-01-01

    The development of solar wind shock models with tensor plasma pressure and the comparison of some of the shock models with the satellite data from Pioneer 6 through Pioneer 9 are reported. Theoretically, difficulties were found in non-turbulent fluid shock models for tensor pressure plasmas. For microscopic shock theories nonlinear growth caused by plasma instabilities was frequently not clearly demonstrated to lead to the formation of a shock. As a result no clear choice for a shock model for the bow shock or interplanetary tensor pressure shocks emerged

  10. A comparison of RAM importance measures

    International Nuclear Information System (INIS)

    Atwood, C.L.; Wolford, A.J.; Wright, R.E.

    1989-01-01

    In this paper measures of importance of components and cut sets of a system are reviewed. The measures considered are based on reliability, availability, and maintainability, the three elements of the acronym RAM. They follow the approaches of Fussell and Vesely and of Birnbaum. A new Birnbaum-type unmaintainability importance measure is proposed. The measures are compared in a simple example, and the appropriate use of unmaintainability importance is discussed

  11. Ram pressure statistics for bent tail radio galaxies

    CSIR Research Space (South Africa)

    Mguda, Z

    2015-01-01

    Full Text Available ), Department of Astronomy, University of Cape Town, Private Bag X3, Rondebosch 7701, South Africa 2South African Astronomical Observatory (SAAO), PO Box 9, 7935 Observatory, Cape Town, South Africa 3Department of Physics, University of Witwatersrand...

  12. RAM-Efficient External Memory Sorting

    DEFF Research Database (Denmark)

    Arge, Lars; Thorup, Mikkel

    2013-01-01

    In recent years a large number of problems have been considered in external memory models of computation, where the complexity measure is the number of blocks of data that are moved between slow external memory and fast internal memory (also called I/Os). In practice, however, internal memory time...... often dominates the total running time once I/O-efficiency has been obtained. In this paper we study algorithms for fundamental problems that are simultaneously I/O-efficient and internal memory efficient in the RAM model of computation....

  13. Radiation-hardened nonvolatile MNOS RAM

    International Nuclear Information System (INIS)

    Wrobel, T.F.; Dodson, W.H.; Hash, G.L.; Jones, R.V.; Nasby, R.D.; Olson, R.J.

    1983-01-01

    A radiation hardened nonvolatile MNOS RAM is being developed at Sandia National Laboratories. The memory organization is 128 x 8 bits and utilizes two p-channel MNOS transistors per memory cell. The peripheral circuitry is constructed with CMOS metal gate and is processed with standard Sandia rad-hard processing techniques. The devices have memory retention after a dose-rate exposure of 1E12 rad(Si)/s, are functional after total dose exposure of 1E6 rad(Si), and are dose-rate upset resistant to levels of 7E8 rad(Si)/s

  14. Optimizing Clinical Drug Product Performance: Applying Biopharmaceutics Risk Assessment Roadmap (BioRAM) and the BioRAM Scoring Grid.

    Science.gov (United States)

    Dickinson, Paul A; Kesisoglou, Filippos; Flanagan, Talia; Martinez, Marilyn N; Mistry, Hitesh B; Crison, John R; Polli, James E; Cruañes, Maria T; Serajuddin, Abu T M; Müllertz, Anette; Cook, Jack A; Selen, Arzu

    2016-11-01

    The aim of Biopharmaceutics Risk Assessment Roadmap (BioRAM) and the BioRAM Scoring Grid is to facilitate optimization of clinical performance of drug products. BioRAM strategy relies on therapy-driven drug delivery and follows an integrated systems approach for formulating and addressing critical questions and decision-making (J Pharm Sci. 2014,103(11): 3777-97). In BioRAM, risk is defined as not achieving the intended in vivo drug product performance, and success is assessed by time to decision-making and action. Emphasis on time to decision-making and time to action highlights the value of well-formulated critical questions and well-designed and conducted integrated studies. This commentary describes and illustrates application of the BioRAM Scoring Grid, a companion to the BioRAM strategy, which guides implementation of such an integrated strategy encompassing 12 critical areas and 6 assessment stages. Application of the BioRAM Scoring Grid is illustrated using published literature. Organizational considerations for implementing BioRAM strategy, including the interactions, function, and skillsets of the BioRAM group members, are also reviewed. As a creative and innovative systems approach, we believe that BioRAM is going to have a broad-reaching impact, influencing drug development and leading to unique collaborations influencing how we learn, and leverage and share knowledge. Published by Elsevier Inc.

  15. SeaRAM: an evaluation of the safety of RAM transport by sea

    International Nuclear Information System (INIS)

    McConnell, P.; Sorenson, K.B.; Carter, M.H.; Keane, M.P.; Keith, V.F.; Heid, R.J.

    1995-01-01

    SeaRAM is a multi-year Department of Energy (DOE) project designed to validate the safety of shipping radioactive materials (RAM) by sea. The project has an ultimate goal of developing and demonstrating analytic tools for performing comprehensive analyses to evaluate the risks to humans and the environment due to sea transport of plutonium, vitrified high-level waste (VHLW), and spent fuel associated with reprocessing and research reactors. To achieve this end, evaluations of maritime databases and structural an thermal analyses of particular severe collision and fire accidents have been and will continue to be conducted. Program management for SeaRAM is based at the DOE's Office of Environmental Restoration. Technical activities for the project are being conducted at Sandia National Laboratories (SNL). Several private organizations are also involved in providing technical support, notably Engineering Computer Optecnomics, Inc. (ECO). The technical work performed for SeaRAM also supports DOE participation in an International Atomic Energy Agency (IAEA) Cooperative Research Program (CRP) entitled Accident Severity at Sea During Transport of Radioactive Material. This paper discusses activities performed during the first year of the project

  16. The rams horn in western history

    Science.gov (United States)

    Lubman, David

    2003-10-01

    The shofar or rams horn-one of the most ancient of surviving aerophones-may have originated with early Neolithic herders. The shofar is mentioned frequently and importantly in the Hebrew bible and in later biblical and post-biblical literature. Despite its long history, contemporary ritual uses, and profound symbolic significance to western religion, no documentation of shofar acoustical properties was found. Since ancient times, shepherds of many cultures have fashioned sound instruments from the horns of herd animals for practical and musical uses. Shepherd horns of other cultures exhibit an evolution of form and technology (e.g., the inclusion of finger holes). The shofar is unique in having retained its primitive form. It is suggested that after centuries of practical use, the shofar became emblematic of the shepherd culture. Ritual use then developed, which froze its form. A modern ritual rams horn played by an experienced blower was examined. This rather short horn was determined to have a source strength of 92 dB (A) at 1 m, a fundamental frequency near 420 Hz, and maximum power output between 1.2 and 1.8 kHz. Sample sounds and detection range estimates are provided.

  17. Membangun Sistem Linux Mandrake Minimal Menggunakan Inisial Disk Ram

    OpenAIRE

    Wagito, Wagito

    2006-01-01

    Minimal Linux system is commonly used for special systems like router, gateway, Linux installer and diskless Linux system. Minimal Linux system is a Linux system that use a few facilities of all Linux capabilities. Mandrake Linux, as one of Linux distribution is able to perform minimal Linux system. RAM is a computer resource that especially used as main memory. A part of RAM's function can be changed into disk called RAM disk. This RAM disk can be used to run the Linux system. This ...

  18. Radiation Level Changes at RAM Package Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Opperman, Erich [Washington Savannah River Company; Hawk, Mark B [ORNL; Kapoor, Ashok [U.S. Department of Energy, Office of Packaging and Transportation; Natali, Ronald [R. B. Natali Consulting, Inc.

    2010-01-01

    This paper will explore design considerations required to meet the regulations that limit radiation level variations at external surfaces of radioactive material (RAM) packages. The radiation level requirements at package surfaces (e.g. TS-R-1 paragraphs 531 and 646) invoke not only maximum radiation levels, but also strict limits on the allowable increase in the radiation level during transport. This paper will explore the regulatory requirements by quantifying the amount of near surface movement and/or payload shifting that results in a 20% increase in the radiation level at the package surface. Typical IP-2, IP-3, Type A and Type B packaging and source geometries will be illustrated. Variations in surface radiation levels are typically the result of changes in the geometry of the surface due to an impact, puncture or crush event, or shifting and settling of radioactive contents.

  19. Ramón Cote Baraibar

    Directory of Open Access Journals (Sweden)

    Juan Gustavo Cobo Borda

    2005-05-01

    Full Text Available Hijo de poeta, como María Mercedes Carranza y Santiago Mutis, Ramón Cote nació en Cúcuta el 19 de mayo de 1963- Su primer libro fue publicado en 1984 por ediciones Arnao, de Madrid, donde se graduó en historia del arte en la Universidad Complutense. Al instalarse en Colombia, se dedicó a la publicidad. Ha publicado ensayos sobre poesía colombiana en revistas como ínsula, y en 1992, con el título de  |Diez de ultramar publicó una muestra de joven poesía latinoamericana que abarcaba nombres como José Luis Rivas, Coral Bracho, Raúl Zurita, Fabio Morabito, Yolanda Pantin y Eduardo Chirinos. Entre la nueva poesía colombiana, su voz es una de las más reconocibles. Vale la pena, entonces, repasar la totalidad de su trayectoria.

  20. Fire effects in Pinus uncinata Ram plantations

    Directory of Open Access Journals (Sweden)

    Adrián Cardil Forradellas

    2016-04-01

    Full Text Available Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU. PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future.Area of study: Cabdella fire (February 2012, in Lleida province, is one of the several wildland fires occurred in 2012 (winter season in the Central Pyrenees. Fire affected a large PU plantation (102 ha located at 1.800-2,100 meters above the sea.Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height.Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume.Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior.Abbreviations used: PU: Pinus uncinata Ram.

  1. Combining Unsteady Blade Pressure Measurements and a Free-Wake Vortex Model to Investigate the Cycle-to-Cycle Variations in Wind Turbine Aerodynamic Blade Loads in Yaw

    Directory of Open Access Journals (Sweden)

    Moutaz Elgammi

    2016-06-01

    Full Text Available Prediction of the unsteady aerodynamic flow phenomenon on wind turbines is challenging and still subject to considerable uncertainty. Under yawed rotor conditions, the wind turbine blades are subjected to unsteady flow conditions as a result of the blade advancing and retreating effect and the development of a skewed vortical wake created downstream of the rotor plane. Blade surface pressure measurements conducted on the NREL Phase VI rotor in yawed conditions have shown that dynamic stall causes the wind turbine blades to experience significant cycle-to-cycle variations in aerodynamic loading. These effects were observed even though the rotor was subjected to a fixed speed and a uniform and steady wind flow. This phenomenon is not normally predicted by existing dynamic stall models integrated in wind turbine design codes. This paper couples blade pressure measurements from the NREL Phase VI rotor to a free-wake vortex model to derive the angle of attack time series at the different blade sections over multiple rotor rotations and three different yaw angles. Through the adopted approach it was possible to investigate how the rotor self-induced aerodynamic load fluctuations influence the unsteady variations in the blade angles of attack and induced velocities. The hysteresis loops for the normal and tangential load coefficients plotted against the angle of attack were plotted over multiple rotor revolutions. Although cycle-to-cycle variations in the angles of attack at the different blade radial locations and azimuth positions are found to be relatively small, the corresponding variations in the normal and tangential load coefficients may be significant. Following a statistical analysis, it was concluded that the load coefficients follow a normal distribution at the majority of blade azimuth angles and radial locations. The results of this study provide further insight on how existing engineering models for dynamic stall may be improved through

  2. Enhanced horizontal extreme-echo speed occurrence leading to polar mesospheric summer echoes (PMSE) increase at solar-wind pressure enhancement during high-speed solar wind stream events

    Science.gov (United States)

    Lee, Y.; Kirkwood, S.; Kwak, Y.; Kim, K.; Shepherd, G. G.

    2013-12-01

    We report on horizontal extreme echo speeds (HEES, ≥ 300 ms^{-1}) observed in long-periodic polar mesospheric summer echoes (PMSE) correlated with solar-wind speed in high speed solar wind streams (HSS) events. The observations were made from VHF 52 MHz radar measurements at Esrange (67.8°N, 20.4°E) between June 1-August 8 in 2006 and 2008. The periodicities of PMSE counts and the volume reflectivity primarily occur at 7, 9 and 13.5 days possibly by the effects of HSS, while the periodicities at 4-6 days are competitively coherent between planetary waves appearing in temperature and solar-wind speed during HSS events. The peaks of both HEES occurrence rate relative to PMSE and turbulence dominantly occur at solar-wind pressure enhancement with minor peaks continued under the passage of HSS over the magnetopause, followed by PMSE peaks in 1-3 days later. This study gives the results that the precipitating high-energetic particles (> 30 keV) during HSS likely induce D-region ionization involved with the consecutive processes of HEES, turbulence and PMSE. The turbulence evolved from the HEES can be explained with the Kelvin-Helmholtz instability, which was observed in PMSE by Röttger et al. [11th International Workshop on technical and scientific aspects of MST Radar, 2006] and firstly simulated for PMSE generation by Hill et al. [Earth Planets Space, 1999]. The HEES is understood as the speed of fast moving ions, accelerated by strong electric field as Lee & Shepherd [JGR, 2010] suggested with the supersonic velocities persisting in polar mesospheric clouds (PMC) region observed at enhanced O(^1S) emission rate ( 10 kR) by WINDII/UARS satellite.

  3. Haematological Response and Blood Chemistry of Yankasa Rams ...

    African Journals Online (AJOL)

    A study was conducted to investigate the effect of graded levels of tamarind leaves (Tamarindus indica) based diets on the haematological and serum biochemical parameters of Yankasa rams. Twelve (12) rams with an average weight of 17.4 kg were allotted to three treatments. The treatments evaluated were 0%, 15% and ...

  4. Design and verification of a self-timed RAM

    DEFF Research Database (Denmark)

    Nielsen, Lars Skovby; Staunstrup, Jørgen

    1995-01-01

    This paper describes a self-timed static RAM. A single bit RAM is described in the design language SYNCHRONIZED TRANSITIONS and using the verification tools supporting this language, it is shown that the design is speed-independent. Furthermore, a transistor level implementation of the design...

  5. Classification of handwritten digits using a RAM neural net architecture

    DEFF Research Database (Denmark)

    Jørgensen, T.M.

    1997-01-01

    Results are reported on the task of recognizing handwritten digits without any advanced pre-processing. The result are obtained using a RAM-based neural network, making use of small receptive fields. Furthermore, a technique that introduces negative weights into the RAM net is reported. The results...

  6. Haematological Response and Blood Chemistry of Yankasa Rams ...

    African Journals Online (AJOL)

    ABSTRACT: A study was conducted to investigate the effect of graded levels of tamarind leaves (Tamarindus indica) based diets on the haematological and serum biochemical parameters of Yankasa rams. Twelve (12) rams with an average weight of 17.4 kg were allotted to three treatments. The treatments evaluated were ...

  7. Performance of growing Yankasa rams Fed graded levels of ...

    African Journals Online (AJOL)

    A feeding trial which lasted eight (8) weeks was carried out to determine the intake and nutrient digestibility by growing Yankasa rams fed graded levels of Tamarindus indica leaves. Twelve Yankasa rams with average liveweight of 17.40kg were randomly allocated to three treatments of four replicates in a Randomized ...

  8. ImPressOne: A Pressure Display and Acquisition Program for the Low Speed Wind Tunnel at DSTO

    National Research Council Canada - National Science Library

    Blandford, Adam

    2005-01-01

    ... time as the test progresses. A software package called ImPressOne was developed for this purpose giving a graphical display of the pressure and the ability to acquire pressure sets and save the data to file...

  9. Hormonal influences on sexual partner preference in rams.

    Science.gov (United States)

    Roselli, Charles E; Resko, John A; Stormshak, Fred

    2002-02-01

    Domestic rams display a naturally occurring variation in sexual partner preference, such that 6-10% of range-bred populations prefer male sexual partners (male-oriented) in contrast to the majority of rams that prefer female sexual partners (female-oriented). Male-oriented rams exhibit hormone profiles and stress responses distinctly different from their heterosexual counterparts. These differences include reduced circulating levels of testosterone that arise after anesthetization. Lower levels of aromatase activity in the medial preoptic area and estrogen receptor in the amygdala were also measured in male-oriented versus female-oriented rams and may represent an important link to sexual behavior that should be investigated. It is anticipated that the male-oriented ram model will be useful for studies aimed at identifying both the activational and organizational components and the neuronal substrates of male sexual partner preferences.

  10. The Ram as a Model for Behavioral Neuroendocrinology

    Science.gov (United States)

    Perkins, Anne; Roselli, Charles E.

    2007-01-01

    The sheep offers a unique model to study male sexual behavior and sexual partner preference. Rams are seasonal breeders and show the greatest libido during short days coincident with the resumption of ovarian cyclicity in the ewe. Threshold concentrations of testosterone are required for the acquisition and display of adult sexual behavior. In addition, estrogens produced from circulating testosterone by cytochrome P450 aromatase in the preoptic area are critical for the maintenance of sexual behaviors in rams. Sex differences in adult reproductive behaviors and hormone responsiveness are the result of permanent organizational effects exerted by testosterone and its metabolites on brain development. Early exposure to ewes enhances ram sexual performance, but cannot prevent some rams from exhibiting male-oriented sexual partner preferences. Neurochemical and neuroanatomical studies suggest that male-oriented ram behavior may be a consequence of individual variations in brain sexual differentiation. PMID:17482616

  11. Shear Ram Verification Test Protocol (VTP) Best Practices

    Energy Technology Data Exchange (ETDEWEB)

    Lindley, Roy A. [Argonne National Lab. (ANL), Argonne, IL (United States); Braun, Joseph C. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-01

    A blowout preventer (BOP) is a critical component used on subsea oil and gas wells during drilling, completion, and workover operations on the U. S. outer continental shelf (OCS). The purpose of the BOP is to seal oil and gas wells, and in the case of an emergency well-control event, to prevent the uncontrolled release of hydrocarbons. One of the most important components of the BOP is the hydraulically operated blind shear ram (BSR) that shears drilling-related components, such as drill pipes, casings, tubings, and wire-related tools that may have been placed in the well. In addition to shearing these components, the BSR must form a seal to keep hydrocarbons within the well bore, even when under the highest well-fluid pressures expected. The purpose of this document is for Argonne National Laboratory (ANL) to provide an independent view, based on current regulations, and best practices for testing and confirming the operability and suitability of BSRs under realistic (or actual) well conditions.

  12. Recombination-assisted megaprimer (RAM) cloning

    Science.gov (United States)

    Mathieu, Jacques; Alvarez, Emilia; Alvarez, Pedro J.J.

    2014-01-01

    No molecular cloning technique is considered universally reliable, and many suffer from being too laborious, complex, or expensive. Restriction-free cloning is among the simplest, most rapid, and cost-effective methods, but does not always provide successful results. We modified this method to enhance its success rate through the use of exponential amplification coupled with homologous end-joining. This new method, recombination-assisted megaprimer (RAM) cloning, significantly extends the application of restriction-free cloning, and allows efficient vector construction with much less time and effort when restriction-free cloning fails to provide satisfactory results. The following modifications were made to the protocol:•Limited number of PCR cycles for both megaprimer synthesis and the cloning reaction to reduce error propagation.•Elimination of phosphorylation and ligation steps previously reported for cloning methods that used exponential amplification, through the inclusion of a reverse primer in the cloning reaction with a 20 base pair region of homology to the forward primer.•The inclusion of 1 M betaine to enhance both reaction specificity and yield. PMID:26150930

  13. A diphtheria outbreak in Buri Ram, Thailand.

    Science.gov (United States)

    Pantukosit, Pantavee; Arpornsuwan, Manote; Sookananta, Kanokporn

    2008-07-01

    In May 1996 there was an outbreak of diphtheria in Buri Ram, Thailand which infected 31 patients, 8 males and 23 females. The mean age of the patients was 8 +/- 5 years. Seventy-four percent had a history of childhood vaccinations. Common signs and symptoms included fever (100%) which was low grade in 61%, sore throat (90%), upper airway obstruction (3%), and hoarseness (10%). Pseudomembranes (seen in 100%) were located on the tonsils (71%), pharynx (22%), larynx (9.6%), and uvula (6%). The mean duration of symptoms prior to admission was 2 days with a range of 1 to 5 days. Complications included upper airway obstruction (10%) and cardiac complications (10%). There were no neurological complication or deaths. There were negative associations between cardiac complications, severity of disease and previous diphtheria vaccination. The ages varied from children to adults. Early recognition and prompt treatment decreased complications and mortality in this group of patients when compared with Chiang Mai and Queen Sirikit National Institute of Child Health (QSNICH) studies.

  14. A comparison of RANS computations and wind tunnel tests for RMS pressures on a high-rise building model

    NARCIS (Netherlands)

    Kalkman, I.M.; Bronkhorst, A.J.; Bentum, C.A. van; Franke, J.

    2012-01-01

    Five root-mean-square (RMS) pressure models are used in combination with different turbulence models to determine whether it is possible to obtain a conservative estimate of RMS pressures on a high-rise building model from a RANS calculation. When a precursor domain is used for the generation of

  15. MEMBANGUN SISTEM LINUX MANDRAKE MINIMAL MENGGUNAKAN INISIAL DISK RAM

    OpenAIRE

    Wagito, Wagito

    2009-01-01

            Minimal Linux system is commonly used for special systems like router, gateway, Linux installer and diskless Linux system. Minimal Linux system is a Linux system that use a few facilities of all Linux capabilities. Mandrake Linux, as one of Linux distribution is able to perform minimal Linux system.         RAM is a computer resource that especially used as main memory. A  part of RAM’s function can be changed into disk called RAM disk. This RAM disk can be used to run the Linux syste...

  16. Using Atmospheric Pressure Tendency to Optimise Battery Charging in Off-Grid Hybrid Wind-Diesel Systems for Telecoms

    OpenAIRE

    Shane Phelan; Paula Meehan; Stephen Daniels

    2013-01-01

    Off grid telecom base stations in developing nations are powered by diesel generators. They are typically oversized and run at a fraction of their rated load for most of their operating lifetime. Running generators at partial load is inefficient and, over time, physically damages the engine. A hybrid configuration uses a battery bank, which powers the telecoms’ load for a portion of the time. The generator only operates when the battery bank needs to be charged. Adding a wind turbine further ...

  17. A fully operational 1-kb variable threshold Josephson RAM

    International Nuclear Information System (INIS)

    Kurosawa, I.; Nakagawa, H.; Aoyagi, M.; Kosaks, S.; Takada, S.

    1991-01-01

    This paper describes the first fully operational Josephson RAM in LSI level integration. The chip was designed as a 4-b x 256-word data RAM unit for a 4-b Josephson computer, The variable threshold memory cell and the relating memory architecture were used. They are so simple in structure that the fabrication is satisfied by the current Josephson junction technology. A directly coupled driver gate for a resistive bit line applies an accurate and stable driving current to the memory cell array. The RAM chip was fabricated with a 3-μm Nb/Al-oxide/Nb junction technology. For obtaining reliable RAM chips, a plasma-enhanced CVD silicon dioxide layer was introduced for insulation between the ground plane and the base electrode. The thermal uniformity of the wafer was improved during the oxidation process for making a tunnel barrier in this work

  18. Atomistic mechanisms of ReRAM cell operation and reliability

    Science.gov (United States)

    Pandey, Sumeet C.

    2018-01-01

    We present results from first-principles-based modeling that captures functionally important physical phenomena critical to cell materials selection, operation, and reliability for resistance-switching memory technologies. An atomic-scale description of retention, the low- and high-resistance states (RS), and the sources of intrinsic cell-level variability in ReRAM is discussed. Through the results obtained from density functional theory, non-equilibrium Green’s function, molecular dynamics, and kinetic Monte Carlo simulations; the role of variable-charge vacancy defects and metal impurities in determining the RS, the LRS-stability, and electron-conduction in such RS is reported. Although, the statistical electrical characteristics of the oxygen-vacancy (Ox-ReRAM) and conductive-bridging RAM (M-ReRAM) are notably different, the underlying similar electrochemical phenomena describing retention and formation/dissolution of RS are being discussed.

  19. Fire effects in Pinus uncinata Ram plantations

    Energy Technology Data Exchange (ETDEWEB)

    Cardil Forradellas, A.; Molina Terrén, D.M.; Oliveres, J.; Castellnou, M.

    2016-07-01

    Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU). PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future. Area of study: Cabdella fire (February 2012), in Lleida province, is one of the several wildland fires occurred in 2012 (winter season) in the Central Pyrenees. Fire affected a large PU plantation (102 ha) located at 1.800-2,100 meters above the sea. Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height. Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume. Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior. (Author)

  20. First experimental results of particle re-suspension in a low pressure wind tunnel applied to the issue of dust in fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Rondeau, Anthony, E-mail: anthony.rondeau@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PSN-RES/SCA, Gif-sur-Yvette 91192 (France); Merrison, Jonathan; Iversen, Jens Jacob [Department of Physics and Astronomy, Institute for Storage Ring Facilities, 8000 Aarhus C (Denmark); Peillon, Samuel; Sabroux, Jean-Christophe; Lemaitre, Pascal; Gensdarmes, François [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PSN-RES/SCA, Gif-sur-Yvette 91192 (France); Chassefière, Eric [Laboratoire Géosciences Paris Sud (GEOPS), UMR 8148, Université Paris Sud, 91403 Orsay Cedex (France)

    2015-10-15

    Highlights: • The first experimental data of dust re-suspension performed by controlled airflow (in terms of airflow velocity and fluid density). • The effect of the surrounding pressure in the re-suspension mechanism. • The friction (shear velocity) reduction at low pressure in the transient regime (Knudsen number close to one). • The importance of the adhesion forces between particles in dust mobilization by clustering. • The fact that the existing re-suspension models of the relevant literature do not take into account this clustering phenomenon. - Abstract: During the normal operating condition of the future ITER tokamak, a massive production of dust in the toroidal vacuum vessel is expected. This dust, originating from the erosion of tungsten and beryllium internal walls of the torus by the plasma, would be mobilized to some extent during a loss of vacuum accident (LOVA). For safety reasons, it is essential to quantify the re-suspended dust fraction during such an event. Here, we provide preliminary experimental data of dust re-suspension obtained in the wind tunnel of the European Space Agency (ESA) at low pressures (300, 130 and 10 mbar). The experimentations were performed with multilayer deposits. We used two powders with a median diameter at 15.5 μm and 21.8 μm. A negative influence of the low pressure in the re-suspension mechanism is observed. For example, given a re-suspension fraction of 10%, increasing friction shear velocities are derived for decreasing absolute pressures: 300 mbar/0.66 m s{sup −1}; 130 mbar/1.08 m s{sup −1}; and 10 mbar/1.84 m s{sup −1}. In addition, we highlight the friction reduction for Kundsen numbers greater than 0.1 by an analysis of the airflow forces.

  1. Preliminary Performance Data on General Electric Integrated Electronic Control Operating on J47 RX1-3 Turbojet Engine in NACA Altitude Wind Tunnel

    Science.gov (United States)

    Blivas, Darnold; Taylor, Burt L., III

    1950-01-01

    Performance data obtained with recording oscillographs are presented to show the transient response of the General Electric Integrated Electronic Control operating on the J47 RXl-3 turbo-Jet engine over a range of altitudes from 10,000 to 45,000 feet and at ram pressure ratios of 1.03 and 1.4. These data represent the performance of the final control configuration developed after an investigation of the engine transient behavior in the NACA altitude wind tunnel. Oscillograph traces of controlled accelerations (throttle bursts),oontrolled decelerations (throttle chops), and controlled altitude starts are presented.

  2. Determining the Dimensions of the Heliosphere from the Time-Correlation of IBEX ENA Observations with Variations in the Solar Wind Dynamic Pressure

    Science.gov (United States)

    Reisenfeld, D. B.; Bzowski, M.; Funsten, H. O.; Janzen, P. H.; Kubiak, M. A.; McComas, D. J.; Schwadron, N.; Sokol, J. M.

    2017-12-01

    The IBEX mission has shown that variations in the ENA flux from the outer heliosphere are associated with the solar cycle. In particular, there is a good correlation between the dynamic pressure of the outbound solar wind and variations in the observed IBEX ENA flux (McComas et al, 2017; Reisenfeld et al., 2016). There is, of course, a time difference between observations of the outbound SW and the heliospheric ENAs with which they correlate, ranging from approximately two to four years, depending on ENA energy and look direction. In this study, we use this time difference as a means of "sounding" the heliosheath, that is, finding the average distance to the ENA source region in a particular direction. We use data from the first seven years of the IBEX mission. As each point in the sky is sampled once every six months, this gives us a time series of 14 points per look direction on which to time correlate. Fluxes are transformed from the spacecraft frame into a heliospheric inertial frame to remove the effects of spacecraft/Earth motion. Fluxes are also corrected for ENA extinction due to charge exchange. To improve statistics, we divide the sky into "macropixels" spanning 30 degrees in longitude and varying ranges of latitude to maintain comparable counting statistics per pixel. In calculating the response time, we account for the varying speed of the outbound solar wind by using a time and latitude dependent set of solar wind speeds derived from interplanetary scintillation data (Sokol et al. 2015). Consistent with heliospheric models, we determine the shortest distance to the heliopause is in the nose direction, with a flaring toward the flanks and poles.

  3. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located at...

  4. The influence of exercising rams on the lambing performance of a ...

    African Journals Online (AJOL)

    Lindsay & Robinson, 1961a; 1961b). The latest trend of rearing rams in ram sheds or small paddocks may stress rams during the mating season, especially in cases of a large ram:ewe ratio. The objective of this study therefore was to investigate the.

  5. A Collapsar Model with Disk Wind: Implications for Supernovae Associated with Gamma-Ray Bursts

    Science.gov (United States)

    Hayakawa, Tomoyasu; Maeda, Keiichi

    2018-02-01

    We construct a simple but self-consistent collapsar model for gamma-ray bursts (GRBs) and SNe associated with GRBs (GRB-SNe). Our model includes a black hole, an accretion disk, and the envelope surrounding the central system. The evolutions of the different components are connected by the transfer of the mass and angular momentum. To address properties of the jet and the wind-driven SNe, we consider competition of the ram pressure from the infalling envelope and those from the jet and wind. The expected properties of the GRB jet and the wind-driven SN are investigated as a function of the progenitor mass and angular momentum. We find two conditions that should be satisfied if the wind-driven explosion is to explain the properties of the observed GRB-SNe: (1) the wind should be collimated at its base, and (2) it should not prevent further accretion even after the launch of the SN explosion. Under these conditions, some relations seen in the properties of the GRB-SNe could be reproduced by a sequence of different angular momentum in the progenitors. Only the model with the largest angular momentum could explain the observed (energetic) GRB-SNe, and we expect that the collapsar model can result in a wide variety of observational counterparts, mainly depending on the angular momentum of the progenitor star.

  6. Extreme winds in Denmark

    DEFF Research Database (Denmark)

    Kristensen, L.; Rathmann, O.; Hansen, S.O.

    2000-01-01

    ), Kegnaes (7 yr), Sprogo (20 yr), and Tystofte (16 yr). The measured data are wind speed, wind direction, temperature and pressure. The wind records are cleaned for terrain effects by means of WASP (Mortensew ct al., Technical Report I-666 (EN), Riso National Laboratory, 1993. Vol. 2. User's Guide......): assuming geostrophic balance, all the wind-velocity data are transformed to friction velocity u(*) and direction at standard conditions by means of the geostrophic drag law for neutral stratification. The basic wind velocity in 30 degrees sectors are obtained through ranking of the largest values...... of the friction velocity pressure pu(*)(2)/2 taken once every two months. The main conclusion is that the basic wind velocity is significantly larger at the west coast of Jutland (25 +/- 1 m/s) than at any of the other sites (22 +/- 1 m/s). These results are in agreement with those obtained by Jensen and Franck...

  7. Wind energy

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This chapter discusses the role wind energy may have in the energy future of the US. The topics discussed in the chapter include historical aspects of wind energy use, the wind energy resource, wind energy technology including intermediate-size and small wind turbines and intermittency of wind power, public attitudes toward wind power, and environmental, siting and land use issues

  8. Health Monitoring of Composite Overwrapped Pressure Vessels (COPVs) Using Meandering Winding Magnetometer ((MWM(Registered Trademark)) Eddy Current Sensors

    Science.gov (United States)

    Russell, Rick; Grundy, David; Jablonski, David; Martin, Christopher; Washabaugh, Andrew; Goldfine, Neil

    2011-01-01

    There are 3 mechanisms that affect the life of a COPV are: a) The age life of the overwrap; b) Cyclic fatigue of the metallic liner; c) Stress Rupture life. The first two mechanisms are understood through test and analysis. A COPV Stress Rupture is a sudden and catastrophic failure of the overwrap while holding at a stress level below the ultimate strength for an extended time. Currently there is no simple, deterministic method of determining the stress rupture life of a COPV, nor a screening technique to determine if a particular COPV is close to the time of a stress rupture failure. Conclusions: Demonstrated a correlation between MWM response and pressure or strain. Demonstrated the ability to monitor stress in COPV at different orientations and depths. FA41 provides best correlation with bottle pressure or stress.

  9. HOW SIGNIFICANT IS RADIATION PRESSURE IN THE DYNAMICS OF THE GAS AROUND YOUNG STELLAR CLUSTERS?

    Energy Technology Data Exchange (ETDEWEB)

    Silich, Sergiy; Tenorio-Tagle, Guillermo, E-mail: silich@inaoep.mx [Instituto Nacional de Astrofisica Optica y Electronica, AP 51, 72000 Puebla (Mexico)

    2013-03-01

    The impact of radiation pressure on the dynamics of the gas in the vicinity of young stellar clusters is thoroughly discussed. The radiation over the thermal/ram pressure ratio time evolution is calculated explicitly and the crucial roles of the cluster mechanical power, the strong time evolution of the ionizing photon flux, and the bolometric luminosity of the exciting cluster are stressed. It is shown that radiation has only a narrow window of opportunity to dominate the wind-driven shell dynamics. This may occur only at early stages of the bubble evolution and if the shell expands into a dusty and/or a very dense proto-cluster medium. The impact of radiation pressure on the wind-driven shell always becomes negligible after about 3 Myr. Finally, the wind-driven model results allow one to compare the model predictions with the distribution of thermal pressure derived from X-ray observations. The shape of the thermal pressure profile then allows us to distinguish between the energy and the momentum-dominated regimes of expansion and thus conclude whether radiative losses of energy or the leakage of hot gas from the bubble interior have been significant during bubble evolution.

  10. Wind flow through shrouded wind turbines

    Science.gov (United States)

    2017-03-01

    velocity and model angle were varied . Additionally, static wall pressures and cross section flow were studied with the addition of a screen. The pressure...the geometry of a wind lens or flange on the shroud and a gradually diverging shape, proved to accelerate the flow through the duct. 14. SUBJECT...Tunnel velocity and model angle were varied . Additionally, static wall pressures and cross section flow were studied with the addition of a screen. The

  11. La Palabra de Ramón Frediani: Las Retenciones

    Directory of Open Access Journals (Sweden)

    Marcelo Coser

    2008-04-01

    Full Text Available En el marco del programa "Prisma Económico" del Instituto de Economía y Finanzas (IEF, Marcelo Coser, su conductor, consulta al Profesor Ramón Osvaldo Frediani, docente de la asignatura “Economía Regional y Urbana” e investigadordel Instituto. Durante la nota, Ramón Frediani nos da sus conceptos sobre las debatidas retenciones y los propósitos que éstas persiguen, brindando su visión respecto al accionar del Gobierno Nacional.

  12. RAM R-200 - A Portable Ruggedized Radiation Monitoring System

    International Nuclear Information System (INIS)

    Wengrowicz, U.; Mazor, T.; Assido, H.; Kadmon, Y.; Tirosh, D.; Shani, G.

    1999-01-01

    RAM R-200, a new generation of ruggedized portable radiation-monitoring systems, is presented. The system which is a result of interdisciplinary research, was developed at the NRCN in collaboration with Ben-Gurion University. It consists of RAM R-200 - a portable radiation meter, and a variety of external probes for wide range gamma radiation fields and beta-gamma contamination detection and measurement. The meter or each one of the external probes can be used as a portable system or a stand-alone radiation measurement station. All the system's components were specially designed to meet severe environmental conditions

  13. Quasi-open loop hydraulic ram incremental actuator with power conserving properties

    International Nuclear Information System (INIS)

    Raymond, E.T.; Robinson, C.W.

    1982-01-01

    An electric stepping motor, operated by command signals from a computer or a microprocessor, rotates a rotary control member of a distributor valve, for sequencing hydraulic pressure and hence flow to the cylinders of an axial piston hydraulic machine. A group of the cylinders are subjected to pressure and flow and the remaining cylinders are vented to a return line. Rotation of the rotary control valve member sequences pressurization by progressively adding a cylinder to the forward edge to the pressurized group and removing a cylinder from the trailing edge of the pressurized group. The double ended pistons of each new pressurized group function to drive a wobble plate into a new position of equilibrium and then hold it in such position until another change in the makeup of the pressurized group. These pistons also displace hydraulic fluid from the opposite cylinder head which serves as the output of a pumping element. An increment of displacement of the wobble plate occurs in direct response to each command pulse that is received by the stepping motor. Wobble plate displacement drives the rotary valve of the hydraulic power transfer unit, causing it to transfer hydraulic fluid from a first expansible chamber on one side of a piston in a hydraulic ram to a second expansible chamber on the opposite side of the piston. Reverse drive of the hydraulic power transfer unit reverses the direction of transfer of hydraulic fluid between the two expansible chambers

  14. Modelling accretion disc and stellar wind interactions: the case of Sgr A.

    Science.gov (United States)

    Christie, I M; Petropoulou, M; Mimica, P; Giannios, D

    2016-07-01

    Sgr A* is an ideal target to study low-luminosity accreting systems. It has been recently proposed that properties of the accretion flow around Sgr A* can be probed through its interactions with the stellar wind of nearby massive stars belonging to the S-cluster. When a star intercepts the accretion disc, the ram and thermal pressures of the disc terminate the stellar wind leading to the formation of a bow shock structure. Here, a semi-analytical model is constructed which describes the geometry of the termination shock formed in the wind. With the employment of numerical hydrodynamic simulations, this model is both verified and extended to a region prone to Kelvin-Helmholtz instabilities. Because the characteristic wind and stellar velocities are in ∼10 8  cm s -1 range, the shocked wind may produce detectable X-rays via thermal bremsstrahlung emission. The application of this model to the pericentre passage of S2, the brightest member of the S-cluster, shows that the shocked wind produces roughly a month long X-ray flare with a peak luminosity of L ≈ 4 × 10 33  erg s -1 for a stellar mass-loss rate, disc number density, and thermal pressure strength of [Formula: see text], n d  = 10 5  cm -3 , and α = 0.1, respectively. This peak luminosity is comparable to the quiescent X-ray emission detected from Sgr A* and is within the detection capabilities of current X-ray observatories. Its detection could constrain the density and thickness of the disc at a distance of ∼3000 gravitational radii from the supermassive black hole.

  15. Transitions between states of magnetotail–ionosphere coupling and the role of solar wind dynamic pressure: the 25 July 2004 interplanetary CME case

    Directory of Open Access Journals (Sweden)

    P. E. Sandholt

    2015-04-01

    Full Text Available In a case study, we investigate transitions between fundamental magnetosphere–ionosphere (M-I coupling modes during storm-time conditions (SYM-H between −100 and −160 nT driven by an interplanetary coronal mass ejection (ICME. We combine observations from the near tail, at geostationary altitude (GOES-10, and electrojet activities across the auroral oval at postnoon-to-dusk and midnight. After an interval of strong westward electrojet (WEJ activity, a 3 h long state of attenuated/quenched WEJ activity was initiated by abrupt drops in the solar wind density and dynamic pressure. The attenuated substorm activity consisted of brief phases of magnetic field perturbation and electron flux decrease at GOES-10 near midnight and moderately strong conjugate events of WEJ enhancements at the southern boundary of the oval, as well as a series of very strong eastward electrojet (EEJ events at dusk, during a phase of enhanced ring current evolution, i.e., enhanced SYM-H deflection within −120 to −150 nT. Each of these M-I coupling events was preceded by poleward boundary intensifications and auroral streamers at higher oval latitudes. We identify this mode of attenuated substorm activity as being due to a magnetotail state characterized by bursty reconnection and bursty bulk flows/dipolarization fronts (multiple current wedgelets with associated injection dynamo in the near tail, in their braking phase. The latter process is associated with activations of the Bostrøm type II (meridional current system. A transition to the next state of M-I coupling, when a full substorm expansion took place, was triggered by an abrupt increase of the ICME dynamic pressure from 1 to 5 nPa. The brief field deflection events at GOES-10 were then replaced by a 20 min long interval of extreme field stretching (Bz approaching 5 nT and Bx ≈ 100 nT followed by a major dipolarization (Δ Bz ≈ 100 nT. In the ionosphere the latter stage appeared as a "full-size" stepwise

  16. The Effect Of Ocimum Gratissimum (Ram Tulsi) On Sexual ...

    African Journals Online (AJOL)

    The Effect Of Ocimum Gratissimum (Ram Tulsi) On Sexual Behaviour In Male Mice. ... The female Swiss Albino mice involved in mating were made receptive by hormonal treatment. The general ... Thus, the resultant aphrodisiac effectivity of the extract lends support to the claims for its traditional usage in sexual disorders.

  17. A realization of the RAM digital filter. [Random Access Memory

    Science.gov (United States)

    Zohar, S.

    1976-01-01

    The digital filtering algorithm of W. D. Little, which employs a large RAM to obtain high speed, is implemented in a simple hardware configuration. The nonrecursive version of this filter is compared to the counting digital filter and found to be competitive for low-order filters up to order 7 (8 coefficients).

  18. Minsk ja RAM 7 / Evelyn Müürsepp

    Index Scriptorium Estoniae

    Müürsepp, Evelyn

    2005-01-01

    Minskis toimunud RAM 7-st (Reapproaching New Media. Models of Collaboration / Ümberhinnates uut meediat. Koostöömudelid". Korraldajad Tatjana Dushina ja Denis Romanovski üritavad luua uue meedia keskust Valgevene kunstiakadeemiasse. Eestit esindasid Evelin Müürsepp ja John Grzinich (modereeris vabade ülikoolide kursust). Osalemisest fotomängus "FotoOhota"

  19. Detecting danger labels with RAM-based neural networks

    DEFF Research Database (Denmark)

    Jørgensen, T.M.; Christensen, S.S.; Andersen, A.W.

    1996-01-01

    An image processing system for the automatic location of danger labels on the back of containers is presented. The system uses RAM-based neural networks to locate and classify labels after a pre-processing step involving specially designed non-linear edge filters and RGB-to-HSV conversion. Results...

  20. Santiago Ramón y Cajal a Barcelona

    OpenAIRE

    Rocha Barral, Elvira

    2008-01-01

    L’estada de Santiago Ramón y Cajal a Barcelona va coincidir amb un fructífer període de la seva vida durant el qual, malgrat totes les dificultats, va aconseguir el reconeixement de la comunitat científica internacional.

  1. Prevalence of gastrointestinal parasites of rams brought into ...

    African Journals Online (AJOL)

    In an effort to gain a better understanding into the role played by food animals in the epidemiology of gastrointestinal parasites, we assessed the prevalence of gastrointestinal parasites in different breeds of rams brought into Abeokuta during a festive season by ... The only protozoan parasite identified was Eimeria spp.

  2. Battering ram, ivory wall – phallic symbols and aggression in ...

    African Journals Online (AJOL)

    This study examines how symbolism is used to suggest sexual aggression in Shakespeare's The Rape of Lucrece. Symbols such as a Roman blade, a battering ram and other seemingly innocent objects in the poem are examined for implicit evidence of sexual conquest. The study argues that Shakespeare employs ...

  3. Genetic parameters of testicular measurements in Merino rams and ...

    African Journals Online (AJOL)

    Genetic parameter estimates for scrotal circumference (SC), testis diameter (TD) and two-tooth liveweight (LW) were obtained for 1380 two-tooth Merino rams born from 1986 to 1998 on the Tygerhoek Experimental Farm. The effect of SC of service sires (n = 263) on ewe fertility was also investigated. Year of birth, selection ...

  4. Study of seasonal sexual activity variations in Algerian rams: Sexual ...

    African Journals Online (AJOL)

    This study focuses on the determination of seasonal effect on two main andrological sexual activity parameters within young and adults rams of Rembi breed from Algeria for a period of one year. The experiment involved a weekly evaluation of males' sexual behaviour and a monthly measurement of serum testosterone ...

  5. Predictions of semen production in ram using phenotypic traits by ...

    African Journals Online (AJOL)

    USER

    2010-07-26

    Jul 26, 2010 ... Concentration of semen production is the most important fertility trait in ram and dimension of testis is a good criterion for ... semen concentration, 184 records were used for training a back propagation ANN system and 8 randomly chosen ... methods can be useful in using input and output variable with high ...

  6. Performance and carcass characteristics of Yankasa ram fed with ...

    African Journals Online (AJOL)

    Administrator

    2011-05-30

    May 30, 2011 ... designed to evaluate the performance and carcass quality of Yankasa rams fed with varied levels of biscuit waste mixed with L. leucocephala as an alternative feed ingredient to maize and wheat offal mixture. MATERIALS AND METHODS. Preparation of experimental diets. Biscuit waste meal (BWM) was ...

  7. Study of seasonal sexual activity variations in Algerian rams: Sexual ...

    African Journals Online (AJOL)

    benia

    2013-10-09

    Oct 9, 2013 ... This study focuses on the determination of seasonal effect on two main andrological sexual activity parameters within young and adults rams of Rembi breed from Algeria for a period of one year. The experiment involved a weekly evaluation of males' sexual behaviour and a monthly measurement of.

  8. Hip dysplasia in a 6-year-old Salz ram

    OpenAIRE

    Loste, Araceli; Ramos, Juan José; Sáez, Teófilo; Sever, Ramón; Marca, Carmen

    2003-01-01

    A 6-year old Salz ram was presented with a history of poor body condition, progressive gait abnormalities, pelvic limb lameness, and difficulty with copulation. Based on the history, clinical signs, hip palpation, and radiography, a diagnosis of hip dysplasia, previously unreported in sheep, was made.

  9. The sexual cycle of the Impala ram Aepyceros melampus Lichtenstein

    African Journals Online (AJOL)

    The sexual cycle of the Impala ram Aepyceros melampus Lichtenstein. J.D. Skinner. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors ...

  10. The Neurobiology of Sexual Partner Preferences in Rams

    Science.gov (United States)

    Roselli, Charles E.; Stormshak, Fred

    2009-01-01

    The question of what causes a male animal to seek out and choose a female as opposed to another male mating partner is unresolved and remains an issue of considerable debate. The most developed biologic theory is the perinatal organizational hypothesis, which states that perinatal hormone exposure mediates sexual differentiation of the brain. Numerous animal experiments have assessed the contribution of perinatal testosterone and/or estradiol exposure to the development of a male-typical mate preference, but almost all have used hormonally manipulated animals. In contrast, variations in sexual partner preferences occur spontaneously in domestic rams, with as many as 8% of the population exhibiting a preference for same-sex mating partners (male-oriented rams). Thus, the domestic ram is an excellent experimental model to study possible links between fetal neuroendocrine programming of neural mechanisms and adult sexual partner preferences. In this review, we present an overview of sexual differentiation in relation to sexual partner preferences. We then summarize results that test the relevance of the organizational hypothesis to expression of same-sex sexual partner preferences in rams. Finally, we demonstrate that the sexual differentiation of brain and behavior in sheep do not depend critically on aromatization of testosterone to estradiol. PMID:19446078

  11. Santiago Ramón y Cajal: Father of Neurosciences

    Indian Academy of Sciences (India)

    The twentieth century has witnessed many outstanding scien- tists who revolutionized our understanding of Nature. Our comprehension of the brain to a large extent stems from the meticulous work of the Spanish biologist Santiago Ramón y. Cajal, who is considered as the Father of Modern Neuro- sciences. Cajal made ...

  12. Reproductive indices of Merino rams fed sun-cured Leucaena ...

    African Journals Online (AJOL)

    Reproductive indices of Merino rams fed sun-cured Leucaena leucocephala forage. I.V. Nsahlai, B.K. Byebwa, M.L.K. Bonsi. Abstract. (South African J of Animal Science, 2000, 30, Supplement 1: 111-112). Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  13. Study on grosstesticular abnormalities of rams and bucks at Luna ...

    African Journals Online (AJOL)

    A study was conducted at Modjo, Luna export abattoir on 505 bucks belonging to four native breeds and 253 rams of two native breeds of Ethiopia to determine the type and the incidence of lesions in the testis and epididymis. The animals were selected from the flock for slaughter using stratified random sampling based on ...

  14. Operation method verification for two-terminal polymer RAM

    International Nuclear Information System (INIS)

    Kim, Jung-Ha; Ahn, Chang-Yong; Lee, Jong-Hoon; Lee, Sang-Sun

    2010-01-01

    The polymer random access memory (PoRAM) has various excellent electrical and mechanical properties, such as small cell feature sizes, high density integrations, and mass producibility. Although the polymer memories have important advantages for reliability, the peripheral circuits of the polymer memories have not been studied yet; so not many research articles are available. Instead of the conventional MOS-switch, a PoRAM uses a diode switch as the cell switch for high density in memory. The diode-switch PoRAM, which has a memory margin (I on /I off ratio) of approximately 1 x 10 3 , achieves a sensing time of 10 ns through the proposed schemes. In this paper, a memory core configuration, read/program/erase techniques and a high-density structure using two-terminal devices such as diodes for the PoRAM are proposed. All proposed schemes were verified by using the CADENCE tool and were fabricated using Dongbu 0.13 um technology.

  15. Prenatal programming of sexual partner preference: the ram model.

    Science.gov (United States)

    Roselli, C E; Stormshak, F

    2009-03-01

    In our laboratory, the domestic ram is used as an experimental model to study the early programming of neural mechanisms underlying same-sex partner preference. This interest developed from the observation that approximately 8% of domestic rams are sexually attracted to other rams (male-oriented) in contrast to the majority of rams that are attracted to oestrous ewes (female-oriented). One prominent feature of sexual differentiation in many species is the presence of a sexually dimorphic nucleus (SDN) in the preoptic/anterior hypothalamus that is larger in males than in females. Lesion studies in rats and ferrets implicate the SDN in the expression of sexual preferences. We discovered an ovine SDN (oSDN) in the preoptic/anterior hypothalamus that is smaller in male- than in female-oriented rams and similar in size to the oSDN of ewes. Neurones of the oSDN show abundant aromatase expression that is also reduced in male-oriented compared to female-oriented rams. This observation suggests that sexual partner preferences are neurologically hard-wired and could be influenced by hormones. Aromatase-containing neurones constitute a nascent oSDN as early as day 60 of gestation, which becomes sexually dimorphic by day 135 of gestation when it is two-fold larger in males than in females. Exposure of fetal female lambs to exogenous testosterone from days 30-90 of gestation resulted in a masculinised oSDN. These data demonstrate that the oSDN develops prenatally and may influence adult sexual preferences. Surprisingly, inhibition of aromatase activity in the brain of ram foetuses during the critical period did not interfere with defeminisation of adult sexual partner preference or oSDN volume. These results fail to support an essential role for neural aromatase in the sexual differentiation of sheep brain and behaviour. Thus, we propose that oSDN morphology and male-typical partner preferences may instead be programmed through an androgen receptor mechanism not involving

  16. Architecture of the sperm whale forehead facilitates ramming combat.

    Science.gov (United States)

    Panagiotopoulou, Olga; Spyridis, Panagiotis; Mehari Abraha, Hyab; Carrier, David R; Pataky, Todd C

    2016-01-01

    Herman Melville's novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L.) sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the "spermaceti organ" and "junk," that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the spermaceti organ would

  17. Architecture of the sperm whale forehead facilitates ramming combat

    Directory of Open Access Journals (Sweden)

    Olga Panagiotopoulou

    2016-04-01

    Full Text Available Herman Melville’s novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L. sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the “spermaceti organ” and “junk,” that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the

  18. Global MHD Simulations of the Earth's Bow Shock Shape and Motion Under Variable Solar Wind Conditions

    Science.gov (United States)

    Mejnertsen, L.; Eastwood, J. P.; Hietala, H.; Schwartz, S. J.; Chittenden, J. P.

    2018-01-01

    Empirical models of the Earth's bow shock are often used to place in situ measurements in context and to understand the global behavior of the foreshock/bow shock system. They are derived statistically from spacecraft bow shock crossings and typically treat the shock surface as a conic section parameterized according to a uniform solar wind ram pressure, although more complex models exist. Here a global magnetohydrodynamic simulation is used to analyze the variability of the Earth's bow shock under real solar wind conditions. The shape and location of the bow shock is found as a function of time, and this is used to calculate the shock velocity over the shock surface. The results are compared to existing empirical models. Good agreement is found in the variability of the subsolar shock location. However, empirical models fail to reproduce the two-dimensional shape of the shock in the simulation. This is because significant solar wind variability occurs on timescales less than the transit time of a single solar wind phase front over the curved shock surface. Empirical models must therefore be used with care when interpreting spacecraft data, especially when observations are made far from the Sun-Earth line. Further analysis reveals a bias to higher shock speeds when measured by virtual spacecraft. This is attributed to the fact that the spacecraft only observes the shock when it is in motion. This must be accounted for when studying bow shock motion and variability with spacecraft data.

  19. Influence of air pressure, humidity, solar radiation, temperature, and wind speed on ambulatory visits due to chronic obstructive pulmonary disease in Bavaria, Germany

    Science.gov (United States)

    Ferrari, Uta; Exner, Teresa; Wanka, Eva R.; Bergemann, Christoph; Meyer-Arnek, Julian; Hildenbrand, Beate; Tufman, Amanda; Heumann, Christian; Huber, Rudolf M.; Bittner, Michael; Fischer, Rainald

    2012-01-01

    Chronic obstructive pulmonary disease (COPD) is one of the most important causes of morbidity and mortality in the world. The disease is often aggravated by periods of increased symptoms requiring medical attention. Among the possible triggers for these exacerbations, meteorological factors are under consideration. The objective of this study was to assess the influence of various meteorological factors on the health status of patients with COPD. For this purpose, the daily number of ambulatory care visits due to COPD was analysed in Bavaria, Germany, for the years 2006 and 2007. The meteorological factors were provided by the model at the European Centre for Medium Range Weather Forecast (ECMWF). For the multivariate analysis, a generalised linear model was used. In Bavaria, an increase of 1% of daily consultations (about 103 visits per day) was found to be associated with a change of 0.72 K temperature, 209.55 of log air surface pressure in Pa, and a decrease of 1% of daily consultations with 1,453,763 Ws m2 of solar radiation. There also seem to be regional differences between north and south Bavaria; for instance, the effect of wind speed and specific humidity with a lag of 1 day were only significant in the north. This study could contribute to a tool for the prevention of exacerbations. It also serves as a model for the further evaluation of the impact of meteorological factors on health, and could easily be applied to other diseases or other regions.

  20. A Dihedral Sample Mount for Off-Normal RAM Performance Measurements

    National Research Council Canada - National Science Library

    Bossoli, Robert

    1999-01-01

    ... (WMRD) Composites and Lightweight Structures Branch (CLSB) anechoic chamber. RAM samples can also be mounted in a full dihedral configuration for simulation of RAM performance in double bounce (corner)-type locations...

  1. Validation of wind loading codes by experiments

    NARCIS (Netherlands)

    Geurts, C.P.W.

    1998-01-01

    Between 1994 and 1997, full scale measurements of the wind and wind induced pressures were carried out on the main building of Eindhoven University of Technology. Simultaneously, a comparative wind tunnel experiment was performed in an atmospheric boundary layer wind tunnel. In this paper, the

  2. Salmonella gene rma (ramA) and multiple-drug-resistant Salmonella enterica serovar typhimurium

    NARCIS (Netherlands)

    Straaten, van T.; Janssen, R.; Mevius, D.J.; Dissel, van J.T.

    2004-01-01

    MarA and its homologue, RamA, have been implicated in multidrug resistance (MDR). RamA overexpression in Salmonella enterica serovar Typhimurium and Escherichia coli conferred MDR independently of marA. Inactivation of ramA did not affect the antibiotic susceptibilities of wild-type S. enterica

  3. Identification of sexually low-response rams using a libido test and ...

    African Journals Online (AJOL)

    higher levels of sex-like behaviour with their pen mates. (monosexual groups) during rearing than did normal rams. These workers thus suggested that the poor performance of such rams when exposed to an oestrous ewe was due to their inability to interpret sexual cues correctly. Working with. Karakul rams, Le Roux and ...

  4. Effect of the age of rams on reproductive performance of ewe hoggets.

    Science.gov (United States)

    Kenyon, P R; Morel, P C H; Morris, S T; West, D M

    2007-08-01

    To determine the effect of the age of rams, used at a standardised ram-to-ewe ratio, on the breeding performance and pregnancy rate of ewe hoggets. Ewe hoggets ((1/2) Romney x (1/4) Texel x (1/4) Finnish Landrace; n=582) aged 7-8 months were exposed to nine two-tooth, harnessed, vasectomised teaser rams for a period of 17 days (Days 1-17). The ewe hoggets were then weighed and randomly assigned to one of three treatment groups (on Day 18) and joined with either four ram hoggets not used previously (n=194), four two-tooth rams not used previously (n=196), or four mixed-age mature rams (n=192) that had been used previously to mate mature ewes immediately before breeding with the ewe hoggets. The breeding period was 34 days. Ewe hoggets were identified as having been mated during the first 17 days only, during both 17-day periods, during the second 17 days only, or not mated. All ewe hoggets were scanned for pregnancy using ultrasound, 54 days after the end of the breeding period. Liveweights of ewe hoggets did not differ between treatment groups. More ewe hoggets were mated by the mature rams in the first 17 days than by either ram hoggets or two-tooth rams (pewe hoggets mated by mature rams returned to service (failed to conceive), and the percentage of ewe hoggets bred in the first 17 days only or pregnant from a service in the first 17 days did not differ significantly between groups. Fewer of the ewe hoggets joined with ram hoggets were diagnosed as pregnant after 34 days of breeding compared with those joined with either two-tooth or mature rams (pewe hoggets failed to be mated at all by ram hoggets compared with those joined with mature rams (pewe hoggets joined with ram hoggets not to be mated at all compared with those joined with two-tooth rams (p=0.07). Two-tooth rams previously unused and mature rams previously used for mating were a better option than unused ram hoggets to maximise the pregnancy rate of ewe hoggets to a 34-day breeding period. However

  5. Consideraciones sobre Infortunios de Alonso Ramírez

    Directory of Open Access Journals (Sweden)

    Leonor Taiano

    2010-12-01

    Full Text Available This article attempts to provide new perspectives for approaching the study of Infortunios de Alonso Ramírez. Several researches about the text have given to Sigüenza y Góngora a character of strangeness to it, which would reduce him to the role of mere amanuensis, indicating that the discursive elaboration belongs to Ramirez. In view of that, I have performed a textual analysis, supported on the book's title and the final passage of the account, that I consider important elements that can offer a new perception on this issue. I base my research, additionally, on the study of its context of publication under the patronage of the New Spain viceroy, as well as the similarities of Infortunios de Alonso Ramírez with other contemporary texts.

  6. Testicular Damage following Testicular Sperm Retrieval: A Ram Model Study

    Directory of Open Access Journals (Sweden)

    Jens Fedder

    2017-01-01

    Full Text Available The aim of this study was to evaluate the possible development of histological abnormalities such as fibrosis and microcalcifications after sperm retrieval in a ram model. Fourteen testicles in nine rams were exposed to open biopsy, multiple TESAs, or TESE, and the remaining four testicles were left unoperated on as controls. Three months after sperm retrieval, the testicles were removed, fixed, and cut into 1/2 cm thick slices and systematically put onto a glass plate exposing macroscopic abnormalities. Tissue from abnormal areas was cut into 3 μm sections and stained for histological evaluation. Pathological abnormalities were observed in testicles exposed to sperm retrieval (≥11 of 14 compared to 0 of 4 control testicles. Testicular damage was found independently of the kind of intervention used. Therefore, cryopreservation of excess sperm should be considered while retrieving sperm.

  7. Etiologic significance of bacterial isolates from rams with palpable epididymitis.

    Science.gov (United States)

    Lozano, E A

    1986-05-01

    Identified and partly identified bacterial isolates were obtained from 48 rams of various breeds that had unilateral or bilateral epididymitis. Most of the animals were approximately 1 year of age; a few were older. Brucella ovis, Actinobacillus spp, Corynebacterium spp, Haemophilus spp, Acinetobacter spp, Escherichia coli, Moraxella spp, Staphylococcus spp, Pasteurella spp, Streptococcus spp, and Chlamydia psittaci were isolated. A vaccine strain of B ovis, isolated species of bacteria, and mixtures of isolates of tissue homogenates containing all isolates except B ovis and C psittaci were inoculated via the mucous membranes of the eyes, nares, and prepuce. Palpable epididymitis was not produced by the inoculations. The vaccine strain of B ovis induced complement-fixation reaction in 11 of 20 rams.

  8. A 1K shadow RAM for circumvention applications

    International Nuclear Information System (INIS)

    Murray, J.R.

    1991-01-01

    This paper reports that circumvention applications require a memory that retains data through radiation (total dose and transient) and loss of power. Various memory technologies have been reviewed and none, as yet, can meet, these requirements. However, if complementary metal oxide silicon (CMOS) and silicon nitride oxide silicon (SNOS) memories are combined in a shadow RAM (random access memory) configuration, the requirements can be fulfilled

  9. Possible link of sudden onset and short-time periodic pulsation of polar mesosphere summer echoes to ULF Pc5 geomagnetic pulsations and solar wind dynamic pressure enhancement

    Science.gov (United States)

    Lee, Y.; Kirkwood, S.; Kwak, Y. S.

    2016-12-01

    The EISCAT VHF incoherent scatter radar in Tromsö, Norway, makes occasional observations of electron densities and Polar Mesosphere Summer Echoes, in the summer polar D-region ionosphere. In one of those datasets, pulsating polar mesospheric summer echoes (PMSE) are observed, with periodicities in the ultra-low frequency (ULF) Pc5 band (1.6-6.7 mHz), following an abrupt increase of the radar reflectivity when a geomagnetic field excursion is started, in turn linked to dynamic pressure (Pdyn) enhancement in the solar wind. At the excursion of the magnetic field, at auroral altitudes of 90 km and above, electron density is abruptly enhanced, followed by a series of short-lived peaks, superimposed on an enhanced level. The short-lived peaks are likely a signature of transient Pc5 geomagnetic pulsations and associated energetic electron precipitation from pitch-angle scattering into the loss cone in the magnetosphere. At the same time, at altitudes around 80-90 km, a sharp increase of PMSE reflectivity occurs, 100 times greater than the increase of electron density, and is followed by pulsating PMSE reflectivity with periodicities in the Pc5 band, increasing and decreasing in magnitude during the course of the next hour. The increase of the pulsation magnitude may be attributed to an increase of high-energy electron precipitation flux ( >30 keV) penetrating to at least the height of maximum PMSE reflectivity. This study suggests that Pc5 pulsation bursts in both magnetic field and high energy electron precipitation could play a crucial role in producing PMSE fluctuations on minute-to-minute time scales.

  10. Wind Energy

    International Nuclear Information System (INIS)

    Rodriguez D, J.M.

    1998-01-01

    The general theory of the wind energy conversion systems is presented. The availability of the wind resource in Colombia and the ranges of the speed of the wind in those which is possible economically to use the wind turbines are described. It is continued with a description of the principal technological characteristics of the wind turbines and are split into wind power and wind-powered pumps; and its use in large quantities grouped in wind farms or in autonomous systems. Finally, its costs and its environmental impact are presented

  11. Effect of freezing on the ram sperm morphometric parameters

    Directory of Open Access Journals (Sweden)

    Choquepuma W

    2017-08-01

    Full Text Available The objective of the study was to evaluate the effect of freezing on the morphometric parameters of ram spermatozoa. For this purpose, the semen of 2 young rams of the Corriedale breed of 2 and 2.5 years old was used, with a body condition of 3.5. The volume, motility, concentration, viability, membrane integrity and sperm morphometry were evaluated in the samples. All morphometric variables were determined using a CASA system (ISAS, Proiser. The freezing process was performed with TRIS based diluent with 3% soy lecithin and glycerol as cryoprotectant. A total of 12 morphometric parameters were analyzed (length, with, area, perimeter, ellipticity, elongation, regularity and roughness of head spermatozoa, acrosome percentage, and the width, distance and insertion angle mid piece ram sperm. A population of 2518 spermatozoa was evaluated in fresh, refrigerated and thawed semen. Our results indicate that some cryopreserved sperm morphometric parameters (length, width, area and perimeter of the head are smaller (p <0.05 than that found in fresh and refrigerated semen.

  12. Feedback by AGN Jets and Wide-angle Winds on a Galactic Scale

    Energy Technology Data Exchange (ETDEWEB)

    Dugan, Zachary; Silk, Joseph [The Johns Hopkins University Department of Physics and Astronomy, Bloomberg Center for Physics and Astronomy, Room 366, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Gaibler, Volker [Universität Heidelberg, Zentrum für Astronomie, Institut für Theoretische Astrophysik, Albert-Ueberle-Str. 2, D-69120 Heidelberg (Germany)

    2017-07-20

    To investigate the differences in mechanical feedback from radio-loud and radio-quiet active galactic nuclei on the host galaxy, we perform 3D AMR hydrodynamic simulations of wide-angle, radio-quiet winds with different inclinations on a single, massive, gas-rich disk galaxy at a redshift of 2–3. We compare our results to hydrodynamic simulations of the same galaxy but with a jet. The jet has an inclination of 0° (perpendicular to the galactic plane), and the winds have inclinations of 0°, 45°, and 90°. We analyze the impact on the host’s gas, star formation, and circumgalactic medium. We find that jet feedback is energy-driven and wind feedback is momentum-driven. In all the simulations, the jet or wind creates a cavity mostly devoid of dense gas in the nuclear region where star formation is then quenched, but we find strong positive feedback in all the simulations at radii greater than 3 kpc. All four simulations have similar SFRs and stellar velocities with large radial and vertical components. However, the wind at an inclination of 90° creates the highest density regions through ram pressure and generates the highest rates of star formation due to its ongoing strong interaction with the dense gas of the galactic plane. With increased wind inclination, we find greater asymmetry in gas distribution and resulting star formation. Our model generates an expanding ring of triggered star formation with typical velocities of the order of 1/3 of the circular velocity, superimposed on the older stellar population. This should result in a potentially detectable blue asymmetry in stellar absorption features at kiloparsec scales.

  13. Wind tunnel tests of an 0.019-scale space shuttle integrated vehicle -2A configuration (model 14-OTS) in the NASA Ames 8 X 7 foot unitary wind tunnel, volume 2. [cold jet gas plumes and pressure distribution

    Science.gov (United States)

    Hardin, R. B.; Burrows, R. R.

    1975-01-01

    The purpose of the test was to determine the effects of cold jet gas plumes on (1) the integrated vehicle longitudinal and lateral-directional force data, (2) exposed wing hinge moment, (3) wing pressure distributions, (4) orbiter MPS external pressure distributions, and (5) model base pressures. An investigation was undertaken to determine the similarity between solid and gaseous plumes; fluorescent oil flow visualization studies were also conducted. Plotted wing pressure data is tabulated.

  14. EUROCODE — Wind Action. Suggestions for modernisation

    Directory of Open Access Journals (Sweden)

    Bartosz Bawiec

    2016-09-01

    Full Text Available The European Standard EN 1991-1-4 2005 Part 1-4 Wind Actions should be modernized. It should be the computer program not the book. The maps of the anticipated wind speed should be replaced by the probable maximal speed of the wind blast calculated by meteorology institutes. The results of flow calculation should be converted into the spline approximated function or generalized Fourier series. The Standard should disclose physical relations wind-structure-pressure. The safety coefficients should not be included in a model of wind action at a being built object. We expect discussion.[b]Keywords[/b]: civil engineering, wind pressure, load modelling in engineering

  15. Wind energy, status and opportunities

    International Nuclear Information System (INIS)

    Van Wijk, A.

    1994-01-01

    Wind energy is diffuse but was widely used before the industrial revolution. The first oil crisis triggered renewed interest in wind energy technology in remote areas. Winds develop when solar radiation reaches the earth's highly varied surface unevenly, creating temperature density and pressure differences. The earth's atmosphere has to circulate to transport heat from the tropics towards the poles. On a global scale, these atmospheric currents work as an immense energy transfer medium. Three main applications can be distinguished: wind pumps, off-grid applications and grid-connected applications. The total generating costs for wind turbine systems are determined by total investments costs, the life time, the operating and maintenance costs, the wind regime (the wind energy potential is proportional to v 3 where v is the wind speed), the efficiency and availability of the wind turbine. The main gains are achieved as a result of improved reliability. The optimum size of a wind turbine depends on the wind speed, the wind turbine costs, the construction costs, the environmental impact and the social costs. The value of wind energy depends on the application that is made of the energy generated and on the costs of alternatives, it can be calculated by the avoided costs of damage to flora, fauna and mankind due to acid rain deposition, enhancement of the greenhouse effect. The environmental aspects are bird hindrance, noise, telecommunication interference and safety. 2 tabs., 1 fig

  16. Wind loads on flat plate photovoltaic array fields (nonsteady winds)

    Science.gov (United States)

    Miller, R. D.; Zimmerman, D. K.

    1981-01-01

    Techniques to predict the dynamic response and the structural dynamic loads of flat plate photovoltaic arrays due to wind turbulence were analyzed. Guidelines for use in predicting the turbulent portion of the wind loading on future similar arrays are presented. The dynamic response and the loads dynamic magnification factor of the two array configurations are similar. The magnification factors at a mid chord and outer chord location on the array illustrated and at four points on the chord are shown. The wind tunnel test experimental rms pressure coefficient on which magnification factors are based is shown. It is found that the largest response and dynamic magnification factor occur at a mid chord location on an array and near the trailing edge. A technique employing these magnification factors and the wind tunnel test rms fluctuating pressure coefficients to calculate design pressure loads due to wind turbulence is presented.

  17. History of fat grafting: from ram fat to stem cells.

    Science.gov (United States)

    Mazzola, Riccardo F; Mazzola, Isabella C

    2015-04-01

    Fat injection empirically started 100 years ago to correct contour deformities mainly on the face and breast. The German surgeon Eugene Hollaender (1867-1932) proposed a cocktail of human and ram fat, to avoid reabsorption. Nowadays, fat injection has evolved, and it ranks among the most popular procedures, for it provides the physician with a range of aesthetic and reconstructive clinical applications with regenerative effects on the surrounding tissues. New research from all over the world has demonstrated the role of adipose-derived stem cells, present in the adipose tissue, in the repair of damaged or missing tissues. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. RAM-based neural networks for data mining applications

    Science.gov (United States)

    Agehed, Kenneth I.; Eide, Age J.; Lindblad, Thomas; Lindsey, Clark S.; Szekely, Geza; Waldemark, Joakim T. A.; Waldemark, Karina E.

    1999-03-01

    We discuss possible new hardware and software techniques for handling very large databases such as image archives. In particular, we investigate how high capacity solid-state `disks' could be used to speed the database processing by algorithms that require considerably memory space. One such algorithm, for example, called the RAM neural network, or weightless neural network, needs a number of large lookup tables to perform most efficiently. The solid state disks could provide fast storage both for the algorithm and the data. We also briefly discuss development of an algorithm to cluster images of similar objects. This algorithm could also benefit from a large cache of fast memory storage.

  19. Ram accelerator direct launch system for space cargo

    Science.gov (United States)

    1987-01-01

    A new method of efficiently accelerating relatively large masses (up to several metric tons) to velocities of 0.6 km/sec up to 12 km/sec using chemical energy has been developed. The vehicle travels through a tube filled with a premixed gaseous fuel and oxidizer mixture. There is no propellant on-board the vehicle. The tube acts as the outer cowling of a ram jet and the energy release process travels with the vehicle. The ballistic efficiency remains high up to extremely high velocities and the acceleration can be maintained at a nearly constant level. Five modes of ram accelerator operation have been investigated; these modes differ primarily in the method of chemical heat release and the operational velocity range, and include two subsonic combustion modes (one of which involves thermally choke a combustion behind the vehicle) and three detonation drive modes. These modes of propulsion are capable of efficient acceleration in the range of 0.6-12 km/sec, although aerodynamic heating becomes severe above about 8 km/sec. Experiments carried out to date at the University of Washington up to 2 km/sec have established proof of principle of the ram accelerator concept and have shown close agreement between predicted and measured performance. A launch system capable of delivering two metric tons into low earth orbit was selected for the purposes of the present study. The preliminary analysis indicates that the overall dimensions of a restricted acceleration (less than approx. 1000 g) launch facility would require a tube 1 m in diameter, with an overall length of approximately 4 km. As in any direct launch scheme, a small on-board rocket is required to circularize the otherwise highly elliptical orbit which intersects the Earth. Various orbital insertion scenarios have been explored for the case of a 9 km/sec ram accelerator launch. These include direct insertion through a single circularization maneuver (i.e., on rocket burn), insertion involving two burns, and a

  20. Juan Antonio Ramírez : La arquitectura como imagen

    OpenAIRE

    NAVARRETE SANTANA, MIGUEL ÁNGEL

    2015-01-01

    Juan Antonio Ramírez era historiador del arte, pero dedicó gran parte de su vida al estudio de la arquitectura. A lo largo de su obra podemos encontrar temas como la utopía arquitectónica, la arquitectura del renacimiento y el barroco, la arquitectura en el cine, o los autores de tratados. En este trabajo repasamos su trayectoria por el ámbito de la arquitectura, y buscamos las que fueron sus mayores aportaciones, como su metodología de análisis iconográfico, su noción de...

  1. Calibration-free 2f WMS with in situ real-time laser characterization and 2f RAM nulling.

    Science.gov (United States)

    Upadhyay, Abhishek; Chakraborty, Arup Lal

    2015-09-01

    This Letter demonstrates a new calibration-free 2f wavelength modulation spectroscopy (WMS) technique to measure gas concentration and pressure without the need for laser precharacterization. A 1650-nm laser diode is used for methane concentration and pressure measurements for pressures up to 4 bar and for a modulation index (m) of 2.2. All laser parameters such as the intensity, linear and nonlinear intensity modulation (IM), frequency modulation (FM) characteristics, the phase difference ψ1 between the FM and the linear IM, and the phase difference ψ2 between the FM and the nonlinear IM are accurately estimated in situ and in real time. This technique accounts for variations in these parameters that arise due to scanning of the laser's center wavelength, laser temperature variations, and aging of the laser. The laser is modulated at its phase quadrature frequency at which the linear IM and the FM are orthogonal to each other (ψ1=90°). This ensures that the two linear IM-dependent distorting Fourier components are orthogonal to the detection axis, and the undistorted 2f signal is recovered. This simplifies the simulation and gas parameter-extraction process. Finally, 2f RAM nulling is implemented to remove the significant absorption-independent 2f residual amplitude-modulation (RAM) signal that is seen to cause significant distortion of the 2f signal and detector saturation.

  2. Wind Structure and Wind Loading

    DEFF Research Database (Denmark)

    Brorsen, Michael

    The purpose of this note is to provide a short description of wind, i.e. of the flow in the atmosphere of the Earth and the loading caused by wind on structures. The description comprises: causes to the generation of windhe interaction between wind and the surface of the Earthhe stochastic nature...... of windhe interaction between wind and structures, where it is shown that wind loading depends strongly on this interaction...

  3. Solar wind stagnation near comets

    International Nuclear Information System (INIS)

    Galeev, A.A.; Cravens, T.E.; Gombosi, T.I.

    1983-03-01

    The nature of the solar wind flow near comets is examined analytically. In particular, the typical values for the stagnation pressure and magnetic barrier strength are estimated, taking into account the magnetic field line tension and the charge exchange cooling of the mass loaded solar wind. Knowledge of the strength of the magnetic barrier is required in order to determine the location of the contact discontinuity which separates the contaminated solar wind plasma and the outflowing plasma of the cometary ionosphere. (author)

  4. Wind tunnel tests of an 0.019-scale space shuttle integrated vehicle -2A configuration (model 14-OTS) in the NASA Ames 8 X 7 foot unitary wind tunnel, volume 3. [cold jet gas plumes and pressure distribution

    Science.gov (United States)

    Hardin, R. B.; Burrows, R. R.

    1975-01-01

    Tests were conducted to determine the effects of cold jet gas plumes on (1) the integrated vehicle longitudinal and lateral-directional force data, (2) exposed wing hinge moment, (3) wing pressure distributions, (4) orbiter MPS external pressure distributions, and (5) model base pressures. An investigation was undertaken to determine the similarity between solid and gaseous plumes; fluorescent oil flow visualization studies were also conducted. Tabulated data listings are included.

  5. COOP Wind and Radiation Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Wind and radiation data from stations in the National Weather Service Cooperative Observers Network. Some precipitation and pressure forms are mistakenly placed in...

  6. Linc-RAM is required for FGF2 function in regulating myogenic cell differentiation.

    Science.gov (United States)

    Zhao, Yixia; Cao, Fengqi; Yu, Xiaohua; Chen, Chuyan; Meng, Jiao; Zhong, Ran; Zhang, Yong; Zhu, Dahai

    2018-01-24

    Myogenic differentiation of skeletal muscle stem cells, also known satellite cells, is tightly orchestrated by extrinsic and intrinsic regulators. Basic fibroblast growth factor (FGF2) is well documented to be implicated in satellite cell self-renewal and differentiation by repressing MyoD. We recently identified a MyoD-regulated and skeletal muscle-specifically expressed long non-coding RNA Linc-RAM which enhances myogenic differentiation by facilitating MyoD/Baf60c/Brg1 complex assembly. Herein, we investigated the transcriptional regulation and intracellular signaling pathway in mediating Linc-RAM gene expression during muscle cell differentiation. Firstly, we demonstrate Linc-RAM is negatively regulated by FGF2 via Ras/Raf/Mek/Erk signaling pathway in muscle cells. Overexpression of MyoD significantly attenuates repression of Linc-RAM promoter activities in C2C12 cells treated with FGF2. Knockout of MyoD abolishes FGF2-mediated repression of Linc-RAM gene transcription in satellite cells sorted from skeletal muscle of MyoD - / - ;Pax7-nGFP mice, suggesting inhibition of MyoD is required for FGF2-mediated expression of Linc-RAM. For the functional significance, we show that overexpression of Linc-RAM rescues FGF2-induced inhibition of C2C12 cell differentiation, indicating inhibition of Linc-RAM is required for FGF2-mediated suppression of myogenic differentiation. Consistently, we are able to further corroborate the requirement of Linc-RAM inhibition for FGF2-modulated repression of myogenic differentiation by using an ex vivo cultured single fiber system and satellite cells sorted from Linc-RAM - / - ;Pax7-nGFP knockout mice. Collectively, the present study not only reveals the intracellular signaling in FGF2-mediated Linc-RAM gene expression but also demonstrate the functional significance of Linc-RAM in FGF2-mediated muscle cell differentiation.

  7. Thermal control of a lidar laser system using a non-conventional ram air heat exchanger

    Science.gov (United States)

    Killough, Brian D.; Alexander, William, Jr.; Swofford, Doyle P.

    1990-01-01

    This paper describes the analysis and performance testing of a uniquely designed external heat exchanger. The heat exchanger is attached externally to an aircraft and is used to cool a laser system within the fuselage. Estimates showed insufficient cooling capacity with a conventional staggered tube array in the limited space available. Thus, a non-conventional design wes developed with larger tube and fin area exposed to the ram air to increase the heat transfer performance. The basic design consists of 28 circular finned aluminum tubes arranged in two parallel banks. Wind tunnel tests were performed to simulate air and liquid flight conditions for the non-conventional parallel bank arrangement and the conventional staggered tube arrangement. Performance comparisons of each of the two designs are presented. Test results are used in a computer model of the heat exchanger to predict the operating performance for the entire flight profile. These analyses predict significantly improved performance over the conventional design and show adequate thermal control margins.

  8. Distributed Wind Market Applications

    Energy Technology Data Exchange (ETDEWEB)

    Forsyth, T.; Baring-Gould, I.

    2007-11-01

    Distributed wind energy systems provide clean, renewable power for on-site use and help relieve pressure on the power grid while providing jobs and contributing to energy security for homes, farms, schools, factories, private and public facilities, distribution utilities, and remote locations. America pioneered small wind technology in the 1920s, and it is the only renewable energy industry segment that the United States still dominates in technology, manufacturing, and world market share. The series of analyses covered by this report were conducted to assess some of the most likely ways that advanced wind turbines could be utilized apart from large, central station power systems. Each chapter represents a final report on specific market segments written by leading experts in this field. As such, this document does not speak with one voice but rather a compendium of different perspectives, which are documented from a variety of people in the U.S. distributed wind field.

  9. Design of a 16 kbit superconducting latching/SFQ hybrid RAM

    International Nuclear Information System (INIS)

    Nagasawa, Shuichi; Hasegawa, Haruhiro; Hashimoto, Tatsunori; Suzuki, Hideo; Miyahara, Kazunori; Enomoto, Youichi

    1999-01-01

    We have designed a 16 kbit superconducting latching/SFQ hybrid (SLASH) RAM, which enables high-frequency clock operation up to 10 GHz. The 16 kbit SLASH RAM consists of four 4x4 matrix arrays of 256 bit RAM blocks, block decoders, latching block drivers, latching block senses, impedance matched lines and the powering circuits. The 256 bit RAM block is composed of a 16x16 matrix array of vortex transitional memory cells, latching drivers, SFQ NOR decoders and latching sense circuits. We have also designed and implemented an SFQ NOR decoder that is composed of magnetically coupled multi-input OR gates and RSFQ inverters. (author)

  10. Wind and tornado guidelines

    International Nuclear Information System (INIS)

    McDonald, J.R.

    1989-01-01

    The objective of the Department of Energy Natural Phenomena Hazards Project is to provide guidance and criteria for design of new facilities and for evaluation of existing ones subjected to extreme winds, earthquakes, and floods. This paper describes the treatment of wind and tornado hazards. Four facility-use categories are defined which represent increasing levels of risk to personnel or the environment in the event of a high wind event. Facilities are assigned to a particular category, depending on their mission, value, or toxic material content. The assigned facility-use category determines the design and evaluation criteria. The criteria are based on probabilistic hazard assessment. Performance goals are also specified for each facility-use category. A uniform approach to design wind loads, based on the ANSI A58.1-1982 standard, allows treatment of high winds and hurricane and tornado winds in a similar manner. Based on the wind hazard models, some sites must account for the possibility of tornadoes while others do not. Atmospheric pressure changes and missiles must be taken into account when considering tornadoes. The design and evaluation guidelines are designed to establish consistent levels of risk for different natural phenomena hazards and for facilities at different geographical locations

  11. The utility of nanowater for ram semen cryopreservation

    Science.gov (United States)

    Murawski, Maciej; Schwarz, Tomasz; Patkowski, Krzysztof; Oszczęda, Zdzisław; Jelkin, Igor; Kosiek, Anna; Gruszecki, Tomasz M; Szymanowska, Anna; Skrzypek, Tomasz; Zieba, Dorota A; Bartlewski, Pawel M

    2015-01-01

    Nanowater (NW; water declusterized in the low-temperature plasma reactor) has specific physicochemical properties that could increase semen viability after freezing and hence fertility after artificial insemination (AI) procedures. The main goal of this study was to evaluate ram semen quality after freezing in the media containing NW. Ejaculates from 10 rams were divided into two equal parts, diluted in a commercially available semen extender (Triladyl®; MiniTüb GmbH, Tiefenbach, Germany) prepared with deionized water (DW) or NW, and then frozen in liquid nitrogen. Semen samples were examined for sperm motility and morphology using the sperm class analyzer system and light microscopy. Cryo-scanning electron microscopy (cryo-SEM) was employed to determine the size of extracellular water crystals in frozen semen samples. Survival time at room temperature, aspartate aminotransferase (AspAT) and alkaline phosphatase (ALP) concentrations post-thawing as well as conception/lambing rates after laparoscopic intrauterine AI of 120 ewes were also determined. There were no significant differences between DW and NW groups in sperm progressive motility (26.4 ± 12.2 and 30.8 ± 12.4%) or survival time (266.6 ± 61.3 and 270.9 ± 76.7 min) after thawing and no differences in the percentages of spermatozoa with various morphological defects before or after freezing. There were, however, differences (P < 0.05) in AspAT (DW: 187.1 ± 160.4 vs. NW: 152.7 ± 118.3 U/l) and ALP concentrations (DW: 2198.3 ± 1810.5 vs. NW: 1612.1 ± 1144.8 U/l) in semen samples post-thawing. Extracellular water crystals were larger (P < 0.05) in ejaculates frozen in NW-containing media. Ultrasonographic examinations on day 40 post-AI revealed higher (P < 0.05) conception rates in ewes inseminated with NW (78.3%) compared with DW semen (58.3%), and the percentages of ewes that carried lambs to term were 73.3% and 45.0% in NW and DW groups, respectively (P

  12. Transonic pressure measurements and comparison of theory to experiment for an arrow-wing configuration. Volume 1: Experimental data report, base configuration and effects of wing twist and leading-edge configuration. [wind tunnel tests, aircraft models

    Science.gov (United States)

    Manro, M. E.; Manning, K. J. R.; Hallstaff, T. H.; Rogers, J. T.

    1975-01-01

    A wind tunnel test of an arrow-wing-body configuration consisting of flat and twisted wings, as well as a variety of leading- and trailing-edge control surface deflections, was conducted at Mach numbers from 0.4 to 1.1 to provide an experimental pressure data base for comparison with theoretical methods. Theory-to-experiment comparisons of detailed pressure distributions were made using current state-of-the-art attached and separated flow methods. The purpose of these comparisons was to delineate conditions under which these theories are valid for both flat and twisted wings and to explore the use of empirical methods to correct the theoretical methods where theory is deficient.

  13. An automated method for the evaluation of ram libido in real mating conditions.

    Science.gov (United States)

    Alhamada, M; Debus, N; Bocquier, F

    2017-11-01

    We investigated if sexual behaviour of rams can be assessed with an electronic Alpha-Detector (AD) which automatically records mounts of mating rams. To evaluate the rams' libido (i.e. all sexual activities), we used six intact and six vasectomised rams in pen tests in three different seasons (late spring, autumn and early spring). The pen tests consisted of 30-min visual observations of each ram placed in a group of six Merino ewes (three ewes in oestrus and three ewes not in oestrus). In the pen tests, sexual behaviour was recorded and divided into two categories: pre-copulatory and copulatory. For validation purposes, during the pen tests the 12 rams were equipped with the AD and the number of times the 18 oestrous ewes were mounted were counted over a period of 3 days. Of the 1191 mounts visually identified in the six 30-min sessions, 1026 were recorded automatically by the AD (i.e. 94%). The paddock test is an automated method consisting of the same rams wearing an AD and placed in a flock of ~250 Merino ewes on two occasions (late spring (spring 1) and early spring of the following year (spring 2)), their copulatory activities were automatically recorded over a 5-day period. The results of the pen tests in the three seasons revealed no difference between the two types of rams (breeding v. detecting rams). Based on live observations high correlations (r=+0.81, Plibido of the two types of rams measured in pen tests showed high repeatability across the three seasons (83 and 75%, Plibido in paddock tests appears to be more reliable than pen tests and far less time consuming. We therefore recommend this automated method to estimate the libido of rams. In addition, this method can be used at any season of the year provided that ewes in oestrus are present in the flock.

  14. Quality and freezing qualities of first and second ejaculates collected from endangered Gulf Coast Native rams.

    Science.gov (United States)

    Nel-Themaat, L; Harding, G D; Chandler, J E; Chenevert, J F; Damiani, P; Fernandez, J M; Humes, P E; Pope, C E; Godke, R A

    2006-10-01

    The Gulf Coast Native sheep, or Louisiana Native sheep, is an endangered previously feral domestic sheep population of European origin that has been under natural selection pressure for reproductive survival in their transplanted range while roaming in the southern Gulf Coast Region of the United States. This sheep population has an increased natural resistance to internal parasites, breeds year-around and has a greater percentage of live lambs as compared with other breeds of sheep raised in similar environments. To preserve the genetic diversity of this important feral sheep population, semen was collected by electro-ejaculation and subjected to cryopreservation for subsequent storage in a genome resource bank. Unrelated rams (n=5) were collected 3 days-a-week, allowing at least 2 days of rest between collections. Two ejaculates were obtained from each ram per collection day, with the second collection conducted 10min after the first ejaculation. Semen was processed using the standard Salamon cryopreservation procedure in a Tris-yolk-glycerol extender, frozen in 0.5ml plastic straws using liquid nitrogen (LN(2)) vapor and stored in LN(2). Each ejaculate was evaluated for volume, sperm concentration/ml (x10(9)/ml), number of spermatozoa/ejaculate (x10(9)), sperm progressive motility (%) for pre-cooled semen, cooled semen and semen after thawing. For the five rams, each semen variable for the first ejaculate was compared with that of the second ejaculate collected 10min later. The mean semen volume, sperm concentration and number of spermatozoa per ejaculate obtained from the first ejaculate were significantly greater (P< or =0.01) than those of the second ejaculate (comparisons being 1.62 and 1.06; 3.2 and 1.5; 5.4 and 1.8, respectively). Overall, the mean motility of pre-cooled (22 degrees Celsius), cooled (5 degrees Celsius) and frozen (-196 degrees Celsius) post-thawed spermatozoa was less (P< or =0.01) in the first ejaculate (71.5, 64.8 and 34.1%, respectively

  15. A simple parameterization of aerosol emissions in RAMS

    Science.gov (United States)

    Letcher, Theodore

    Throughout the past decade, a high degree of attention has been focused on determining the microphysical impact of anthropogenically enhanced concentrations of Cloud Condensation Nuclei (CCN) on orographic snowfall in the mountains of the western United States. This area has garnered a lot of attention due to the implications this effect may have on local water resource distribution within the Region. Recent advances in computing power and the development of highly advanced microphysical schemes within numerical models have provided an estimation of the sensitivity that orographic snowfall has to changes in atmospheric CCN concentrations. However, what is still lacking is a coupling between these advanced microphysical schemes and a real-world representation of CCN sources. Previously, an attempt to representation the heterogeneous evolution of aerosol was made by coupling three-dimensional aerosol output from the WRF Chemistry model to the Colorado State University (CSU) Regional Atmospheric Modeling System (RAMS) (Ward et al. 2011). The biggest problem associated with this scheme was the computational expense. In fact, the computational expense associated with this scheme was so high, that it was prohibitive for simulations with fine enough resolution to accurately represent microphysical processes. To improve upon this method, a new parameterization for aerosol emission was developed in such a way that it was fully contained within RAMS. Several assumptions went into generating a computationally efficient aerosol emissions parameterization in RAMS. The most notable assumption was the decision to neglect the chemical processes in formed in the formation of Secondary Aerosol (SA), and instead treat SA as primary aerosol via short-term WRF-CHEM simulations. While, SA makes up a substantial portion of the total aerosol burden (much of which is made up of organic material), the representation of this process is highly complex and highly expensive within a numerical

  16. Reversible harmless interruption of testicular blood supply in the ram

    International Nuclear Information System (INIS)

    van Vliet, J.; De Ruiter-Bootsma, A.L.; Oei, Y.H.; Hoekstra, A.; De Rooij, D.G.; Wensing, C.J.

    1987-01-01

    An effective method of interrupting testicular blood flow temporarily and repeatedly in the ram has been developed. Blockade of flow has been achieved mechanically by an inflatable occluder placed around the testicular artery at the level of the spermatic cord. The effect of the blockade on total testicular blood supply was investigated using Doppler flowmetry and a percutaneous Xenon-133 injection method. With both approaches, the blood flow changes after inflation or deflation of the occluders could be estimated satisfactorily. A substantial decrease of testicular blood flow was achieved in eight of the 10 testes with inflated occluders. However, there were indications that in the remaining two testes blockade of the arterial flow was not complete. After deflation of the occluders, blood flow was restored rapidly and completely in all testes. Macro- and microscopic examinations revealed no long-term damage to the testis after blood flow interruptions lasting 30 or 60 minutes

  17. High-speed nonvolatile CMOS/MNOS RAM

    International Nuclear Information System (INIS)

    Derbenwick, G.F.; Dodson, W.D.; Sokel, R.J.

    1979-01-01

    A bulk silicon technology for a high-speed static CMOS/MNOS RAM has been developed. Radiation-hardened, high voltage CMOS circuits have been fabricated for the memory array driving circuits and the enhancement-mode p-channel MNOS memory transistors have been fabricated using a native tunneling oxide with a 45 nm CVD Si 3 N 4 insulator deposited at 750 0 C. Read cycle times less than 350 ns and write cycle times of 1 μs are projected for the final 1Kx1 design. The CMOS circuits provide adequate speed for the write and read cycles and minimize the standby power dissipation. Retention times well in excess of 30 min are projected

  18. Dependence of the open-closed field line boundary in Saturn's ionosphere on both the IMF and solar wind dynamic pressure: comparison with the UV auroral oval observed by the HST

    Directory of Open Access Journals (Sweden)

    E. S. Belenkaya

    2008-02-01

    Full Text Available We model the open magnetic field region in Saturn's southern polar ionosphere during two compression regions observed by the Cassini spacecraft upstream of Saturn in January 2004, and compare these with the auroral ovals observed simultaneously in ultraviolet images obtained by the Hubble Space Telescope. The modelling employs the paraboloid model of Saturn's magnetospheric magnetic field, whose parameters are varied according to the observed values of both the solar wind dynamic pressure and the interplanetary magnetic field (IMF vector. It is shown that the open field area responds strongly to the IMF vector for both expanded and compressed magnetic models, corresponding to low and high dynamic pressure, respectively. It is also shown that the computed open field region agrees with the poleward boundary of the auroras as well as or better than those derived previously from a model in which only the variation of the IMF vector was taken into account. The results again support the hypothesis that the auroral oval at Saturn is associated with the open-closed field line boundary and hence with the solar wind interaction.

  19. Simulating lightning into the RAMS model: two case studies

    Science.gov (United States)

    Federico, Stefano; Avolio, Elenio; Petracca, Marco; Panegrossi, Giulia; Dietrich, Stefano

    2013-04-01

    In this paper we show the results of the implementation of a tailored version of a methodology already presented in the bibliography to simulate flashes into the Regional Atmospheric Modeling System (RAMS). The method gives the flash rate for each thundercloud, which is detected by a labelling algorithm applied to the output of RAMS. The flash rate is computed by assuming a plane capacitor model, which is charged by the non-inductive graupel-ice charge separation mechanism and is discharged by lightning. The method explicitly considers the charging zone and uses the geometry of the graupel field to redistribute the flashes. An important feature of the method is that it gives the position and time of occurrence of each flash, allowing for a detailed and comprehensive display of the lightning activity during the simulation period. The method is applied to two case studies occurred over the Lazio Region, in central Italy. Simulations are compared with the lightning detected by the LINET network. The cases refer to a thunderstorm characterized by an intense lightning activity (up to 2800 flashes per hour over the Lazio Region), and a moderate thunderstorm (up to 1600 flashes per hour over the same domain). The results show that the model is able to catch the main features of both storms and their relative differences. This feature is promising because the method is computationally fast and gives a tool to the forecaster to predict the lightning threat. Nevertheless there are errors in timing (O(3h)) and positioning (O(100km)) of the convection, which mirrors in timing and position errors of the lightning distribution. These model shortcomings presently limit the use of the lightning forecast; nevertheless the method can take advantages of future development of the model physics, initialization techniques, and ensemble forecast. A useful application of the method in an ensemble forecast is already suggested.

  20. Wind power

    International Nuclear Information System (INIS)

    Gipe, P.

    2007-01-01

    This book is a translation of the edition published in the USA under the title of ''wind power: renewable energy for home, farm and business''. In the wake of mass blackouts and energy crises, wind power remains a largely untapped resource of renewable energy. It is a booming worldwide industry whose technology, under the collective wing of aficionados like author Paul Gipe, is coming of age. Wind Power guides us through the emergent, sometimes daunting discourse on wind technology, giving frank explanations of how to use wind technology wisely and sound advice on how to avoid common mistakes. Since the mid-1970's, Paul Gipe has played a part in nearly every aspect of wind energy development from installing small turbines to promoting wind energy worldwide. As an American proponent of renewable energy, Gipe has earned the acclaim and respect of European energy specialists for years, but his arguments have often fallen on deaf ears at home. Today, the topic of wind power is cropping up everywhere from the beaches of Cape Cod to the Oregon-Washington border, and one wind turbine is capable of producing enough electricity per year to run 200 average American households. Now, Paul Gipe is back to shed light on this increasingly important energy source with a revised edition of Wind Power. Over the course of his career, Paul Gipe has been a proponent, participant, observer, and critic of the wind industry. His experience with wind has given rise to two previous books on the subject, Wind Energy Basics and Wind Power for Home and Business, which have sold over 50,000 copies. Wind Power for Home and Business has become a staple for both homeowners and professionals interested in the subject, and now, with energy prices soaring, interest in wind power is hitting an all-time high. With chapters on output and economics, Wind Power discloses how much you can expect from each method of wind technology, both in terms of energy and financial savings. The book updated models

  1. Uudised : Hortus Musicus Moskvas. TPÜ naiskoor koorikonkursil. RAM samal laval Mark Knopfleriga. "Tuuleveskid. Kerkokell" / Joosep Sang

    Index Scriptorium Estoniae

    Sang, Joosep

    2000-01-01

    Hortus Musicus esines 23. ja 24. nov. Moskvas. TPÜnaiskoor võitis II preemia XVII rahvusvahelisel F.Schuberti nim. koorikonkursil Austrias. RAM esineb 8. dets. Helsingis Hartwall Areenas heategevuskontserdil. RAM esineb 6. dets. Estonia kontserdisaalis kavaga "Tuuleveskid. Kerkokell"

  2. RANGE RAM: a long-term planning method for managing grazing lands

    Science.gov (United States)

    Henricus C. Jansen

    1976-01-01

    Range RAM (Resource Allocation Method) is a computerized planning method designed to assist range managers in developing and selecting alternatives in spatial and temporal allocation of resources. The technique is applicable at the frest or district management levels, or their equivalents. Range RAM can help formulate plans that maximize the production of range outputs...

  3. Evaluation of the meat quality Yankasa rams fed graded levels of ...

    African Journals Online (AJOL)

    Twenty Yankasa rams aged between 10 and 12 months with average weight of 12.15kg were used to evaluate the effect of different levels of biscuit waste and Leucaena leucocephala meal inclusion in diets on the quality of their meat samples. The rams were randomly assigned to five treatment diets of 0%, 25%, 50%, 75% ...

  4. A Simplified Model of an Offset Ram Press for Sunflower Oil ...

    African Journals Online (AJOL)

    This paper presents the theoretical analysis of a simplified model of a ram press. The design of the ram press is based on the classical slider-crank mechanism. A force analysis of the press was performed for several successive positions of the driving lever (handle) and for a range of values of certain dimensionless ...

  5. Tornado type wind turbines

    Science.gov (United States)

    Hsu, Cheng-Ting

    1984-01-01

    A tornado type wind turbine has a vertically disposed wind collecting tower with spaced apart inner and outer walls and a central bore. The upper end of the tower is open while the lower end of the structure is in communication with a wind intake chamber. An opening in the wind chamber is positioned over a turbine which is in driving communication with an electrical generator. An opening between the inner and outer walls at the lower end of the tower permits radially flowing air to enter the space between the inner and outer walls while a vertically disposed opening in the wind collecting tower permits tangentially flowing air to enter the central bore. A porous portion of the inner wall permits the radially flowing air to interact with the tangentially flowing air so as to create an intensified vortex flow which exits out of the top opening of the tower so as to create a low pressure core and thus draw air through the opening of the wind intake chamber so as to drive the turbine.

  6. Comparison of sexual performance and testicular characteristics of melatonin treated Kivircik and Charollais rams during the non-breeding season

    Directory of Open Access Journals (Sweden)

    M. Cevik

    Full Text Available ABSTRACT This study was conducted to investigate the effects of melatonin implantation on basic testicular characteristics and reproductive performance of Kivircik and Charollais rams and ewes during the non-breeding season. In this study, 8 Kivircik and 6 Charollais rams were used. Rams were implanted with 54 mg melatonin according to the manufacturer's instructions. At melatonin implantation and at ram introduction the reproductive performance and testicular characteristics were evaluated. Throughout the experimental period, rams were permanently kept outdoors under conditions of natural day length and at ambient temperature. The effects of exogenous melatonin treatments on the reproductive performances of rams and ewes, estrus response, pregnancy rate, litter size and twinning rate of ewes were evaluated in all groups. Libido values were significantly higher in Charollais rams compared to Kivircik rams (P<0.001. Testicular volume (TV was increased in both ram breeds. Scrotal length (SL was also increased in both Kivircik and Charollais rams (P<0.01. In conclusion, we showed that the treatment of rams with slow release melatonin implants increased scrotal diameters and testicular volumes in both Kivircik and Charollais rams. Furthermore, melatonin implantation improved the reproductive performances of ewes naturally mated with these melatonin implanted rams during non-breeding season.

  7. Dissecting and circumventing the requirement for RAM in CSL-dependent Notch signaling.

    Directory of Open Access Journals (Sweden)

    Scott E Johnson

    Full Text Available The Notch signaling pathway is an intercellular communication network vital to metazoan development. Notch activation leads to the nuclear localization of the intracellular portion (NICD of the Notch receptor. Once in the nucleus, NICD binds the transcription factor CSL through a bivalent interaction involving the high-affinity RAM region and the lower affinity ANK domain, converting CSL from a transcriptionally-repressed to an active state. This interaction is believed to directly displace co-repressor proteins from CSL and recruit co-activator proteins. Here we investigate the consequences of this bivalent organization in converting CSL from the repressed to active form. One proposed function of RAM is to promote the weak ANK:CSL interaction; thus, fusion of CSL-ANK should bypass this function of RAM. We find that a CSL-ANK fusion protein is transcriptionally active in reporter assays, but that the addition of RAM in trans further increases transcriptional activity, suggesting another role of RAM in activation. A single F235L point substitution, which disrupts co-repressor binding to CSL, renders the CSL-ANK fusion fully active and refractory to further stimulation by RAM in trans. These results suggest that in the context of a mammalian CSL-ANK fusion protein, the main role of RAM is to displace co-repressor proteins from CSL.

  8. A Minimum Leakage Quasi-Static RAM Bitcell

    Directory of Open Access Journals (Sweden)

    Adam Teman

    2011-05-01

    Full Text Available As SRAMs continue to grow and comprise larger percentages of the area and power consumption in advanced systems, the need to minimize static currents becomes essential. This brief presents a novel 9T Quasi-Static RAM Bitcell that provides aggressive leakage reduction and high write margins. The quasi-static operation method of this cell, based on internal feedback and leakage ratios, minimizes static power while maintaining sufficient, albeit depleted, noise margins. This paper presents the concept of the novel cell, and discusses the stability of the cell under hold, read and write operations. The cell was implemented in a low-power 40 nm TSMC process, showing as much as a 12× reduction in leakage current at typical conditions, as compared to a standard 6T or 8T bitcell at the same supply voltage. The implemented cell showed full functionality under global and local process variations at nominal and low voltages, as low as 300 mV.

  9. Assessing the Rebound Hammer Test for Rammed Earth Material

    Directory of Open Access Journals (Sweden)

    Quoc-Bao Bui

    2017-10-01

    Full Text Available Rammed-earth (RE is a construction material manufactured from the soil. The soil is compacted at its optimum water content, inside a formwork to build a monolithic wall. RE material is attracting renewed interest throughout the world thanks to its sustainable characteristics: low embodied energy, substantial thermal inertia, and natural regulator of moisture; on the other hand, the existing historic RE buildings is still numerous. This is why several research studies have been carried out recently to study different aspects of this material. However, few investigations have been carried out to explore the possibility of applying the nondestructive techniques on RE walls. This paper presents an assessment of the well-known rebound hammer test on RE walls. The calibration curves of the rebound hammer test have been established for conventional concrete where the rebound number is more than 20. For RE material with lower compressive strengths, a new calibration curve must be established. In the present study, two soils were used and different homogenized specimens with different dry densities were manufactured and tested, to plot a general calibration curve. Then, this calibration curve was applied to RE specimens; different results at different positions in an earthen layer were observed, due to the inhomogeneity of the material. The final results showed an acceptable accuracy of the calibration curve in the prediction of the compressive strength of RE material.

  10. Geographic resolution issues in RAM transportation risk analysis

    International Nuclear Information System (INIS)

    Mills G, Scott; Neuhauser, Sieglinde

    2000-01-01

    Over the years that radioactive material (RAM) transportation risk estimates have been calculated using the RADTRAN code, demand for improved geographic resolution of route characteristics, especially density of population neighboring route segments, has led to code improvements that provide more specific route definition. With the advent of geographic information systems (GISs), the achievable resolution of route characteristics is theoretically very high. The authors have compiled population-density data in 1-kilometer increments for routes extending over hundreds of kilometers without impractical expenditures of time. Achievable resolution of analysis is limited, however, by the resolution of available data. U.S. Census data typically have 1-km or better resolution within densely-populated portions of metropolitan areas but census blocks are much larger in rural areas. Geographic resolution of accident-rate data, especially for heavy/combination trucks, are typically tabulated on a statewide basis. These practical realities cause one to ask what level(s) of resolution may be necessary for meaningful risk analysis of transportation actions on a state or interstate scale

  11. Truck transport of RAM: Risk effects of avoiding metropolitan areas

    International Nuclear Information System (INIS)

    Mills, G.S.; Neuhauser, K.S.

    1997-11-01

    In the transport of radioactive material (RAM), e.g., spent nuclear fuel (SNF), stakeholders are generally most concerned about risks in high population density areas along transportation routes because of the perceived high consequences of potential accidents. The most significant portions of a transcontinental route and an alternative examined previously were evaluated again using population density data derived from US Census Block data. This method of characterizing population that adjoins route segments offers improved resolution of population density variations, especially in high population density areas along typical transport routes. Calculated incident free doses and accident dose risks for these routes, and the rural, suburban and urban segments are presented for comparison of their relative magnitudes. The results indicate that modification of this route to avoid major metropolitan areas through use of non-Interstate highways increases total risk yet does not eliminate a relatively small urban component of the accident dose risk. This conclusion is not altered by improved resolution of route segments adjoining high density populations

  12. Fort St. Vrain fuel-handling system RAM analysis

    International Nuclear Information System (INIS)

    Azizi, S.M.; Berg, G.E.; Burton, J.H.; Durand, R.E.; Larson, E.M.; Pepe, D.J.; Rutherford, P.D.; Novachek, F.J.

    1989-01-01

    Public Service of Company of Colorado (PSC) is planning to decommission its Fort St. Vrain plant in 1990. This requires removal of 1,500 separate assemblies from the core. With the low historical availability of the fuel-handling system (FHS), defueling time was estimated at 36 months. With plant expenses of approximately $1.6 million per month during defueling, this would mean a schedule cost of $58 million. With their contractor, Rockwell International, PSC embarked on a reliability, availability, and maintainability (RAM) analysis to reduce projected defueling time. Key elements included (a) estimating availability of the FHS using a limited historical record, (b) assessing the defueling critical path, and (c) proposing and evaluating design/operational improvements. The most cost-effective improvements are being implemented and are expected to provide a reduction of >18 months in schedule and a net savings of $20 to 25 million. The paper describes the FHS design and operation, major problems associated with fuel-handling operations, and results and recommendations

  13. Limit analysis, rammed earth material and Casagrande test

    Science.gov (United States)

    El-Nabouch, Ranime; Pastor, Joseph; Bui, Quoc-Bao; Plé, Olivier

    2018-02-01

    The present paper is concerned with the simulation of the Casagrande test carried out on a rammed earth material for wall-type structures in the framework of Limit Analysis (LA). In a preliminary study, the material is considered as a homogeneous Coulomb material, and existing LA static and kinematic codes are used for the simulation of the test. In each loading case, static and kinematic bounds coincide; the corresponding exact solution is a two-rigid-block mechanism together with a quasi-constant stress vector and a velocity jump also constant along the interface, for the three loading cases. In a second study, to take into account the influence of compressive loadings related to the porosity of the material, an elliptic criterion (denoted Cohesive Cam-Clay, CCC) is defined based on recent homogenization results about the hollow sphere model for porous Coulomb materials. Finally, original finite element formulations of the static and mixed kinematic methods for the CCC material are developed and applied to the Casagrande test. The results are the same than above, except that this time the velocity jump depends on the compressive loading, which is more realistic but not satisfying fully the experimental observations. Therefore, the possible extensions of this work towards non-standard direct methods are analyzed in the conclusion section.

  14. InfraSound from wind turbines : observations from Castle River wind farm. Volume 1

    International Nuclear Information System (INIS)

    Edworthy, J.; Hepburn, H.

    2005-01-01

    Although infrasound has been discussed as a concern by groups opposed to wind farm facilities, there is very little information available about infrasound and wind turbines. This paper presented details of a project conducted by VisionQuest, the largest wind power producer in Canada. Three sensor types were used: precision sound analyzer, seismic geophones, and calibrated microphones to take measurements in low, medium and high winds. The project also measured infrasound when the wind farm was not operating. Acquisition geometry was presented, as well as details of apparent attenuations of wind noise. It was noted that high wind noise was a dominant factor and that there was little difference when the wind farm was not operational. It was suggested that turbines have no impact with high wind, since wind noise is not attenuated with distance. It was noted that increased geophone amplitudes indicate high wind coupled motion which is attenuated when the turbines are on. Results indicate that all frequencies showed attenuation with distance. Evidence showed that low frequency sound pressure levels were often lower when the turbines were switched on. Where turbines contributed to sound pressure levels, the magnitude of the contribution was below levels of concern to human health. Ambient sound pressure levels were much higher than contributions from wind turbines. It was concluded that wind itself generates infrasound. Wind turbines generate low levels of infrasound, detectable very close to facilities at low to medium wind speeds. Wind turbines may reduce ambient infrasound levels at high wind speeds by converting the energy from the wind into electricity. refs., tabs., figs

  15. Development of tunable high pressure CO2 laser for lidar measurements of pollutants and wind velocities, January 1976 to December 1977

    Science.gov (United States)

    Javan, A.

    1979-01-01

    A tunable multiatmospheric pulsed CO2 laser with emphasis on experimental features and supporting theoretical analyses important to differential absorption lidar and Doppler lidar measurement of pollutants and wind velocities is reported. The energy deposition and the means to produce the uniform high density plasma in the multiatmospheric medium, through UV preionization of an organic seed gas is discussed. Design features of the pulsed CO2 laser are presented. The radiative processes which are operative and prevent the laser from breaking into oscillations in a large number of modes over its broad amplification bandwidth are described. The mode competition for the transient pulsed laser oscillation in a standing wave and traveling wave ring laser configuration is discussed and contrasted with the approach to steady state oscillations. The latter findings are important to transient injection locking for production of a highly stable pulsed CO2 laser output.

  16. Toward an Integrated Optical Data System for Wind Tunnel Testing

    National Research Council Canada - National Science Library

    Ruyten, Wim

    1999-01-01

    ...) of the test article in a wind tunnel test. The theory for such P&A determinations is developed and applied to data from a recent pressure sensitive paint test in AEDC's 16 ft transonic wind tunnel...

  17. Is ram-pressure stripping an efficient mechanism to remove gas in galaxies?

    Science.gov (United States)

    Quilis, Vicent; Planelles, Susana; Ricciardelli, Elena

    2017-07-01

    We study how the gas in a sample of galaxies (M* > 109 M⊙) in clusters, obtained in a cosmological simulation, is affected by the interaction with the intracluster medium (ICM). The dynamical state of each elemental parcel of gas is studied using the total energy. At z ˜ 2, the galaxies in the simulation are evenly distributed within clusters, later moving towards more central locations. In this process, gas from the ICM is accreted and mixed with the gas in the galactic halo. Simultaneously, the interaction with the environment removes part of the gas. A characteristic stellar mass around M* ˜ 1010 M⊙ appears as a threshold marking two differentiated behaviours. Below this mass, galaxies are located at the external part of clusters and have eccentric orbits. The effect of the interaction with the environment is marginal. Above, galaxies are mainly located at the inner part of clusters with mostly radial orbits with low velocities. In these massive systems, part of the gas, strongly correlated with the stellar mass of the galaxy, is removed. The amount of removed gas is subdominant compared with the quantity of retained gas, which is continuously influenced by the hot gas coming from the ICM. The analysis of individual galaxies reveals the existence of a complex pattern of flows, turbulence and a constant fuelling of gas to the hot corona from the ICM, which could mean that the global effect of the interaction of galaxies with their environment is substantially less dramatic than previously expected.

  18. Molecular Gas Dominated 50 kpc Ram Pressure Stripped Tail of the Coma Galaxy D100

    Czech Academy of Sciences Publication Activity Database

    Jáchym, Pavel; Sun, M.; Kenney, J.D.P.; Cortese, L.; Combes, F.; Yagi, M.; Yoshida, M.; Palouš, Jan; Roediger, E.

    2017-01-01

    Roč. 839, č. 2 (2017), 114/1-114/15 ISSN 0004-637X R&D Projects: GA MŠk LG14013; GA ČR GA15-06012S; GA MŠk(CZ) LM2015067 Institutional support: RVO:67985815 Keywords : galaxies * clusters * evolution Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics OBOR OECD: Astronomy (including astrophysics,space science) Impact factor: 5.533, year: 2016

  19. Contribution to internal pressure and flammable gas concentration in RAM transport packages

    International Nuclear Information System (INIS)

    Warrant, M.M.; Brown, N.

    1989-01-01

    Various facilities in the US operated by the US Department of Energy generate wastes contaminated with transuranic (TRU) isotopes (such as plutonium and americium) that decay primarily by emission of alpha particles. The alpha particles lose energy in their passage through matter and change the material chemically in the process called radiolysis. The waste materials consist of a wide variety of commercially available plastics, paper, cloth, and rubber; concreted or sludge wastes containing water; and metals, glass, and other solid inorganic materials. TRU wastes that have surface dose rates of 200 mrem/hr or less are typically packaged in plastic bags placed inside metal drums or boxes that are vented through high efficiency particulate air (HEPA) filters. These wastes are to be transported from waste generation or storage sites to the Waste Isolation Pilot Plant (WIPP) in the TRUPACT-II, a Type B package

  20. Search for cold and hot gas in the ram pressure stripped Virgo dwarf galaxy IC 3418

    Czech Academy of Sciences Publication Activity Database

    Jáchym, Pavel; Kenney, J.D.P.; Růžička, Adam; Sun, M.; Combes, F.; Palouš, Jan

    2013-01-01

    Roč. 556, August (2013), A99/1-A99/15 ISSN 0004-6361 R&D Projects: GA ČR(CZ) GPP209/11/P699; GA ČR GAP209/12/1795 Grant - others:Rada Programu interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M100031203 Program:M Institutional support: RVO:67985815 Keywords : VCC 1217/IC 3418 * Virgo * evolution of galaxies Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.479, year: 2013

  1. Wind energy

    CERN Document Server

    Woll, Kris

    2016-01-01

    Across the country, huge open spaces are covered in gently turning wind turbines. In Wind Energy, explore how these machines generate electricity, learn about the history of wind power, and discover the latest advances in the field. Easy-to-read text, vivid images, and helpful back matter give readers a clear look at this subject. Features include a table of contents, infographics, a glossary, additional resources, and an index. Aligned to Common Core Standards and correlated to state standards. Core Library is an imprint of Abdo Publishing, a division of ABDO.

  2. Prolactin variants in ram adenohypophyses vary with season

    Science.gov (United States)

    Stroud, C. M.; Deaver, D. R.; Peters, J. L.; Loeper, D. C.; Toth, B. E.; Derr, J. A.; Hymer, W. C.

    1992-01-01

    Secretion of PRL in sheep is affected by photoperiod being highest during the spring and summer, lowest in fall and winter. The objectives of this study were to determine if 1) the production of variant forms of PRL, and 2) immuno- and bioactivities of PRL (iPRL and bPRL) differ during times of the year selected to represent periods of low, transitional and high PRL secretion. Twelve mature rams were maintained on pasture and killed in October, December, and April (n = 4/month). Individual pituitary glands were dispersed, cells obtained, and fixed for immunocytochemical flow cytometry, extracted with 0.01 N NaHCO3 or cultured in serum-free, defined media. The Mr of PRL extracted from cells immediately following dispersion ranged from 14-140K, with significantly more bands greater than 40K being detected from rams sacrificed in December than from those killed in October and April (P less than 0.01). No bands of PRL greater than 25K were observed when samples were reduced with beta-mercaptoethanol prior to electrophoresis, indicating that the high Mr forms were disulfide-linked aggregates. Culture media from October and April contained variants of PRL that ranged from 22-40K but those greater than 25K were generally not observed from cells harvested during December. Extracts of cells after 24 h in culture contained fewer high Mr species during December than had been present in initial extracts from that month. In contrast, during April more high Mr intracellular forms were present after culture than had been detected prior to culture during that month. The percentage of lactotrophs averaged 50.0 +/- 2.5, 47.4 +/- 5.7, and 59.4 +/- 5.5 for October, December, and April, respectively. Initial lactotroph content (pg/lactotroph) of iPRL was higher (P = 0.06) in April (46.0 +/- 17.0) when compared to October and December (8.0 +/- 2.0 and 20.0 +/- 10.0, respectively). In contrast, the bPRL content of initial extracts was higher (P = 0.05) in December (267.0 +/- 68.0) than

  3. Effects of genotype on testis, semen quality, and mineral composition of semen in various ram breeds.

    Science.gov (United States)

    Mert, Handan; Karakus, Kadir; Yılmaz, Ayhan; Aygun, Turgut; Mert, Nihat; Apaydın, Betul; Seyhan, Ercan

    2009-12-01

    This study was carried out on nine 3-5-year-old rams of different species: four Norduz, two Karakas, and three Ile de France × Akkaraman rams. Sperm of each ram was collected by means of an artificial vagina once per month from June to October 2007. In each case, the sperm volume, pH, viscosity, mass activity, motility, concentration, abnormal spermatozoa ratio, and the sperm death/live ratio were recorder along with the animals' testis diameter and scrotum circumferences. The concentrations of calcium, potassium, copper, magnesium, iron, and zinc levels in seminal plasma were determined. There were changes in the measured parameters according to genotype and time of sampling, which can be useful for better planning of anestrous mating programs for these ram species.

  4. Reliable Acquisition of RAM Dumps from Intel-Based Apple Mac Computers over FireWire

    Science.gov (United States)

    Gladyshev, Pavel; Almansoori, Afrah

    RAM content acquisition is an important step in live forensic analysis of computer systems. FireWire offers an attractive way to acquire RAM content of Apple Mac computers equipped with a FireWire connection. However, the existing techniques for doing so require substantial knowledge of the target computer configuration and cannot be used reliably on a previously unknown computer in a crime scene. This paper proposes a novel method for acquiring RAM content of Apple Mac computers over FireWire, which automatically discovers necessary information about the target computer and can be used in the crime scene setting. As an application of the developed method, the techniques for recovery of AOL Instant Messenger (AIM) conversation fragments from RAM dumps are also discussed in this paper.

  5. Design and manufacture of radar absorbing wind turbine blades - final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-15

    This report describes the results of a collaborative project between QinetiQ Ltd and NOI (Scotland) Ltd to design and manufacture radar absorbent wind turbine blades. The main objectives were to: use predictive modelling to understand the contribution made by the blade to radar cross section (RCS) of the complete turbine; confirm that the turbine RCS could feasibility be reduced to appropriate levels through the use of radar absorbent material (RAM); and to demonstrate that introduction of stealth technology within current composite sections would allow RAM variants of the blade materials to be manufactured with minimal impact on the structure. The RCS of a turbine was predicted at frequencies at which representative air traffic control (ATC), weather and marine navigation radar systems operate. The material compositions that exist on the blades produced by NOI were studied and methods by which RAM could be introduced to each region were identified. RCS predictions for a blade having RAM over its surface were then repeated. The study showed that it was possible to modify all material regions of the NOI blades to create RAM with little or no degradation in structural properties, thus reducing detection by non-Doppler radar and ATC radars. A full practical demonstration of a stealthy turbine is recommended to allow the benefits of RCS reduction through the use of RAM to be quantified by all stakeholders.

  6. Consignor's part and multimodality of the packages of RAM

    International Nuclear Information System (INIS)

    Grenier, M.

    1993-01-01

    One of the essential principles of Safety in transport of RAM as it was carried on, until the present days, is that the safety comes firstly from the packaging, and not from a special consideration of the mode of transport or anything else. A natural consequence was that the packaging remains the same, whatever is the used mode of transport, another that the transport mode does not take part, otherly than by its normal safety in the carriage itself in the protection against the radioactive hazard. Some recent actions, nevertheless, could be considered as putting some doubt on the implementation of this principles in the regulations and sometimes on these principles themselves. However, these latter come from the fact that the safety of the transport lays essentially in the hands of the consignor. He is indeed the only one who knows well enough the material and who is able to assess the adequation of the packaging and to warrant it to the Competent Authority when necessary. Besides, the packaging is the only direct grasp he has on the shipment, outside the special case of exclusive use. This situation is not completely incompatible with a new possible graduation of the packaging according to the transport mode, under the condition that this graduation be unidimensional which means the same in every field of testing. The consignor must, then, select the packaging corresponding to the most demanding of the possible modes. It is certainly much more difficult to adapt the mode of transport to the shipped materials themselves. All the transport has then to be in the hands of the consignor. That perhaps, can be relevant to industrial nuclear transport (eg: irradiated fuels, wastes), but not to the carriage of radioactive materials in general, which is the scope of IAEA regulations. (author)

  7. C-RAM: breaking mobile device memory barriers using the cloud

    OpenAIRE

    Pamboris, A; Pietzuch, P

    2015-01-01

    ?Mobile applications are constrained by the available memory of mobile devices. We present C-RAM, a system that uses cloud-based memory to extend the memory of mobile devices. It splits application state and its associated computation between a mobile device and a cloud node to allow applications to consume more memory, while minimising the performance impact. C-RAM thus enables developers to realise new applications or port legacy desktop applications with a large memory footprint to mobile ...

  8. Radiation immune RAM semiconductor technology for the 80's. [Random Access Memory

    Science.gov (United States)

    Hanna, W. A.; Panagos, P.

    1983-01-01

    This paper presents current and short term future characteristics of RAM semiconductor technologies which were obtained by literature survey and discussions with cognizant Government and industry personnel. In particular, total ionizing dose tolerance and high energy particle susceptibility of the technologies are addressed. Technologies judged compatible with spacecraft applications are ranked to determine the best current and future technology for fast access (less than 60 ns), radiation tolerant RAM.

  9. Beta irradiation as a method of the static MOS RAM memories processing and circuit design verification

    International Nuclear Information System (INIS)

    Wislowski, J.; Jagusztyn, M.

    1985-01-01

    1K NMOS RAM's in plastic packages were investigated after beta irradiation up to 100 Gy (Si) total dose. The memory samples differed as regards processing details and circuit design. Radioisotope beta sources were used for irradiation as the most safe and least expensive. A new version of the model of radiation-induced functional degradation of MOS RAM's has been proposed. 19 refs., 8 figs., 5 tabs. (author)

  10. The use of silicon devices (diodes, RAMs, etc.) for alpha particle detection

    International Nuclear Information System (INIS)

    Agosteo, S.; Foglio Para, A.

    1993-01-01

    Silicon electronic devices (diodes, random access memories (RAMs), etc.) can be employed in alpha particle detection and spectroscopy with a good energy resolution. The detection mechanisms are first discussed; the performances of these devices operating in the pulse and in the current mode are then described starting from the pioneering works of the last decade. Some peculiar applications of RAMs are finally reported. (author). 7 refs, 5 figs, 1 tab

  11. Influence of Arabic and Chinese Rammed Earth Techniques in the Himalayan Region

    Directory of Open Access Journals (Sweden)

    Paul Jaquin

    2012-10-01

    Full Text Available This paper discusses different rammed earth construction technique in Asia. Rammed earth construction techniques from China, Indian, Nepal and Bhutan are examined. It is shown that these techniques are demonstrably different from each other, and argued that the techniques may have developed independently. Case study structures are discussed and it is shown that with care it is possible to chart the development of both techniques both chronologically and geographically.

  12. Acute myeloid leukemia with RAM immunophenotype: a pediatric case with unusual morphologic features

    Directory of Open Access Journals (Sweden)

    Miriam Conces

    2017-06-01

    Full Text Available The RAM immunophenotype has been recently described as a subtype of acute myelogenous leukemia (AML that is characterized clinically by extremely poor prognosis. We present a case of AML with RAM immunophenotype in a 5-year-old patient that resulted in poor outcome despite early hematopoietic cell transplant. We describe the unusual morphologic features that, along with the distinct immunophenotype, may provide initial diagnostic clues and further justify the classification of this AML variant as a rather distinct subtype.

  13. the effect of freezing method on the survival of ram spermatozoa

    African Journals Online (AJOL)

    Sci.2l, 351. SALAIIiON, S., 1970. The survival of ram spermatozoa following pellet freezing below-79oC. Aust- .1. hiol..n'r. 13. 459. SALAMON, S. & BRANDON, M.R., l97l . Effect of compcition of thawing solution on sunrival of ram spernntozoa iroznn by the pellet method. Aust. J. biol. Sci. 24,355. SALAMON, S. & VISSER, D., ...

  14. World Wind

    Data.gov (United States)

    National Aeronautics and Space Administration — World Wind allows any user to zoom from satellite altitude into any place on Earth, leveraging high resolution LandSat imagery and SRTM elevation data to experience...

  15. eRAM: encyclopedia of rare disease annotations for precision medicine.

    Science.gov (United States)

    Jia, Jinmeng; An, Zhongxin; Ming, Yue; Guo, Yongli; Li, Wei; Liang, Yunxiang; Guo, Dongming; Li, Xin; Tai, Jun; Chen, Geng; Jin, Yaqiong; Liu, Zhimei; Ni, Xin; Shi, Tieliu

    2018-01-04

    Rare diseases affect over a hundred million people worldwide, most of these patients are not accurately diagnosed and effectively treated. The limited knowledge of rare diseases forms the biggest obstacle for improving their treatment. Detailed clinical phenotyping is considered as a keystone of deciphering genes and realizing the precision medicine for rare diseases. Here, we preset a standardized system for various types of rare diseases, called encyclopedia of Rare disease Annotations for Precision Medicine (eRAM). eRAM was built by text-mining nearly 10 million scientific publications and electronic medical records, and integrating various data in existing recognized databases (such as Unified Medical Language System (UMLS), Human Phenotype Ontology, Orphanet, OMIM, GWAS). eRAM systematically incorporates currently available data on clinical manifestations and molecular mechanisms of rare diseases and uncovers many novel associations among diseases. eRAM provides enriched annotations for 15 942 rare diseases, yielding 6147 human disease related phenotype terms, 31 661 mammalians phenotype terms, 10,202 symptoms from UMLS, 18 815 genes and 92 580 genotypes. eRAM can not only provide information about rare disease mechanism but also facilitate clinicians to make accurate diagnostic and therapeutic decisions towards rare diseases. eRAM can be freely accessed at http://www.unimd.org/eram/. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  16. Expression of basal cell marker revealed by RAM11 antibody during epithelial regeneration in rabbits.

    Directory of Open Access Journals (Sweden)

    Tadeusz Cichocki

    2010-06-01

    Full Text Available RAM11 is a mouse monoclonal anti-rabbit macrophage antibody recognizing connective tissue and vascular macrophages. Our previous report showed that RAM11 reacted with basal cells of stratified squamous epithelia of rabbit skin, oral mucosa and esophagus. The aim of the present study was to follow the appearance of RAM11 immunoreactivity in basal cells of regenerating oral epithelium in rabbits. No RAM11 immunostaining was observed in the regenerating epithelium examined on days 1 and 3 of wound healing. A weak immunofluorescence first appeared on day 7 in single basal cells and 32% of RAM11- positive basal cells were observed on day 14. These findings indicate that expression of the antigen recognized by RAM11 antibody is a transient event in the differentiation of oral keratinocytes which not always occurs during epithelial repair, although it is a constant feature of epithelial turnover in mature epithelium. Therefore this antigen can be regarded as basal cell marker only in mature stratified squamous epithelia.

  17. Oxygen-Independent Pressure Sensitive Paint, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Pressure sensitive paint (PSP) systems are excellent tools for performing global pressure measurements in aerodynamic testing, especially in wind tunnel studies. The...

  18. 78 FR 29364 - Exelon Corporation, Exelon Wind 1, LLC, Exelon Wind 2, LLC, Exelon Wind 3, LLC, Exelon Wind 4...

    Science.gov (United States)

    2013-05-20

    ...-005, QF07-257-004] Exelon Corporation, Exelon Wind 1, LLC, Exelon Wind 2, LLC, Exelon Wind 3, LLC, Exelon Wind 4, LLC, Exelon Wind 5, LLC, Exelon Wind 6, LLC, Exelon Wind 7, LLC, Exelon Wind 8, LLC, Exelon Wind 9, LLC, Exelon Wind 10, LLC, Exelon Wind 11, LLC, High Plains Wind Power, LLC v. Xcel Energy...

  19. Adapting ORAP to wind plants : industry value and functional requirements.

    Energy Technology Data Exchange (ETDEWEB)

    2010-08-01

    Strategic Power Systems (SPS) was contracted by Sandia National Laboratories to assess the feasibility of adapting their ORAP (Operational Reliability Analysis Program) tool for deployment to the wind industry. ORAP for Wind is proposed for use as the primary data source for the CREW (Continuous Reliability Enhancement for Wind) database which will be maintained by Sandia to enable reliability analysis of US wind fleet operations. The report primarily addresses the functional requirements of the wind-based system. The SPS ORAP reliability monitoring system has been used successfully for over twenty years to collect RAM (Reliability, Availability, Maintainability) and operations data for benchmarking and analysis of gas and steam turbine performance. This report documents the requirements to adapt the ORAP system for the wind industry. It specifies which existing ORAP design features should be retained, as well as key new requirements for wind. The latter includes alignment with existing and emerging wind industry standards (IEEE 762, ISO 3977 and IEC 61400). There is also a comprehensive list of thirty critical-to-quality (CTQ) functional requirements which must be considered and addressed to establish the optimum design for wind.

  20. Investigation on wind energy-compressed air power system.

    Science.gov (United States)

    Jia, Guang-Zheng; Wang, Xuan-Yin; Wu, Gen-Mao

    2004-03-01

    Wind energy is a pollution free and renewable resource widely distributed over China. Aimed at protecting the environment and enlarging application of wind energy, a new approach to application of wind energy by using compressed air power to some extent instead of electricity put forward. This includes: explaining the working principles and characteristics of the wind energy-compressed air power system; discussing the compatibility of wind energy and compressor capacity; presenting the theoretical model and computational simulation of the system. The obtained compressor capacity vs wind power relationship in certain wind velocity range can be helpful in the designing of the wind power-compressed air system. Results of investigations on the application of high-pressure compressed air for pressure reduction led to conclusion that pressure reduction with expander is better than the throttle regulator in energy saving.

  1. Doppler Lidar Wind Value-Added Product

    Energy Technology Data Exchange (ETDEWEB)

    Newsom, R. K. [DOE ARM Climate Research Facility, Washington, DC (United States); Sivaraman, C. [DOE ARM Climate Research Facility, Washington, DC (United States); Shippert, T. R. [DOE ARM Climate Research Facility, Washington, DC (United States); Riihimaki, L. D. [DOE ARM Climate Research Facility, Washington, DC (United States)

    2015-07-01

    Wind speed and direction, together with pressure, temperature, and relative humidity, are the most fundamental atmospheric state parameters. Accurate measurement of these parameters is crucial for numerical weather prediction. Vertically resolved wind measurements in the atmospheric boundary layer are particularly important for modeling pollutant and aerosol transport. Raw data from a scanning coherent Doppler lidar system can be processed to generate accurate height-resolved measurements of wind speed and direction in the atmospheric boundary layer.

  2. Recognition of a heritage in danger: rammed-earth architecture in Lyon city, France

    Science.gov (United States)

    Alex, Dorothée

    2018-04-01

    Historically, man has built with what he had underfoot: if the earthen construction is a tradition of 11 000 years old, the technique of the rammed earth (earth rammed in a formwork) is relatively new since it appeared for the first time in Tunisia in 814 BC. Exported in France, rammed earth is established mainly in Rhône-Alpes Region which has an ideal soil, rich in gravel, sand, silt and clay. Traditionally associated with the rural world, rammed earth heritage is also present in urban centers. The city of Lyon is one of the rare European cities to concentrate a large proportion of rammed earth buildings: the inventories made show that they are present in almost all the districts as well as in the suburban areas. This high density could be explained by the phenomenon of rural exodus experienced by Lyon during the nineteenth century. The agricultural populations, attracted by the prosperity of the city, then settled at the doors of this city, bringing their know-how by building with the cheaper and easier material available: earth. Rammed earth buildings are therefore located on bounder areas between the countryside and the city. They are thus found on lands that were once outside the city walls. With the advent of the industrial era at the end of the 19th century and the appearance of concrete, rammed earth constructions gradually disappeared. The constructions that we see today are therefore prior to 1900. Varied, ranging from detached houses to the 6-storey buildings, they stand as a testimony to a know-how that finds a particular resonance today, while the environmental and economic concerns are at the forefront. Little known, they constitute a heritage in danger that should be rediscovered.

  3. WIND TURBINES FOR WIND POWER INSTALLATIONS

    Directory of Open Access Journals (Sweden)

    Barladean A.S.

    2008-04-01

    Full Text Available The problem of wind turbine choice for wind power stations is examined in this paper. It is shown by comparison of parameters and characteristics of wind turbines, that for existing modes and speeds of wind in territory of Republic of Moldova it is necessary to use multi-blade small speed rotation wind turbines of fan class.

  4. Wind turbine

    Science.gov (United States)

    Cheney, Jr., Marvin C.

    1982-01-01

    A wind turbine of the type having an airfoil blade (15) mounted on a flexible beam (20) and a pitch governor (55) which selectively, torsionally twists the flexible beam in response to wind turbine speed thereby setting blade pitch, is provided with a limiter (85) which restricts unwanted pitch change at operating speeds due to torsional creep of the flexible beam. The limiter allows twisting of the beam by the governor under excessive wind velocity conditions to orient the blades in stall pitch positions, thereby preventing overspeed operation of the turbine. In the preferred embodiment, the pitch governor comprises a pendulum (65,70) which responds to changing rotor speed by pivotal movement, the limiter comprising a resilient member (90) which engages an end of the pendulum to restrict further movement thereof, and in turn restrict beam creep and unwanted blade pitch misadjustment.

  5. Early wind engineering experiments in Denmark

    DEFF Research Database (Denmark)

    Larose, Guy; Franck, Niels

    1997-01-01

    distribution around bodies ranging from bird wings to buildings. The experiments shed light on the importance of suction on the overall wind loading. Martin Jensen combined field measurements of pressure distributions to model scale experiments to write "The Model-Law for Phenomena in Natural Wind...

  6. Effects of the Horns Reef wind farm on harbour porpoises

    International Nuclear Information System (INIS)

    Tougaard, J.; Teilmann, J.; Rye Hansen, J.

    2004-09-01

    Horns Reef offshore wind farm was established in 2002. It consists of 80 2 MW wind turbines, mounted on steel monopile foundations. A harbour porpoise monitoring program was set up in connection with the environmental impact assessment (EIA) of the wind farm project. This monitoring program started in 1999 with collection of baseline data and has continued though construction and operational period. The program continues through 2005. Baseline studies showed that harbour porpoises are abundant in the area, including the area where the wind farm is now located. Significant effects on behaviour and distribution of the porpoises were observed during the construction of the wind farm. Changes could be linked to pile driving operations, where monopile foundations were rammed into the seabed. This procedure produced high levels of underwater noise and mitigation procedures in the form of a ramp up procedure and deployment of acoustic alarms were employed. During the construction period very few animals were observed inside the wind farm area. Acoustic monitoring data showed a significant increase in waiting time between porpoise encounters in connection with pile driving operations, followed by a rapid return to levels normal for the construction period as a whole. However, when the entire construction period was considered as a whole, T-POD activity increased relative to baseline. Observations during operation of the wind farm in 2003 showed a return to baseline levels on most of the indicators derived from the acoustic monitoring and animals were again seen inside the wind farm area. (au)

  7. State-Transition-Aware Spilling Heuristic for MLC STT-RAM-Based Registers

    Directory of Open Access Journals (Sweden)

    Yuanhui Ni

    2017-01-01

    Full Text Available Multilevel Cell Spin-Transfer Torque Random Access Memory (MLC STT-RAM is a promising nonvolatile memory technology to build registers for its natural immunity to electromagnetic radiation in rad-hard space environment. Unlike traditional SRAM-based registers, MLC STT-RAM exhibits unbalanced write state transitions due to the fact that the magnetization directions of hard and soft domains cannot be flipped independently. This feature leads to nonuniform costs of write states in terms of latency and energy. However, current SRAM-targeting register allocations do not have a clear understanding of the impact of the different write state-transition costs. As a result, those approaches heuristically select variables to be spilled without considering the spilling priority imposed by MLC STT-RAM. Aiming to address this limitation, this paper proposes a state-transition-aware spilling cost minimization (SSCM policy, to save power when MLC STT-RAM is employed in register design. Specifically, the spilling cost model is first constructed according to the linear combination of different state-transition frequencies. Directed by the proposed cost model, the compiler picks up spilling candidates to achieve lower power and higher performance. Experimental results show that the proposed SSCM technique can save energy by 19.4% and improve the lifetime by 23.2% of MLC STT-RAM-based register design.

  8. Proteomic Investigation of Ram Spermatozoa and the Proteins Conferred by Seminal Plasma.

    Science.gov (United States)

    Pini, Taylor; Leahy, Tamara; Soleilhavoup, Clement; Tsikis, Guillaume; Labas, Valerie; Combes-Soia, Lucie; Harichaux, Gregoire; Rickard, Jessica P; Druart, Xavier; de Graaf, Simon P

    2016-10-07

    Sperm proteomes have emerged for several species; however, the extent of species similarity is unknown. Sheep are an important agricultural species for which a comprehensive sperm proteome has not been produced. In addition, potential proteomic factors from seminal plasma that may contribute to improved fertility after cervical insemination are yet to be explored. Here we use liquid chromatography-tandem mass spectrometry to investigate the proteome of ejaculated ram spermatozoa, with quantitative comparison to epididymal spermatozoa. We also present a comparison to published proteomes of five other species. We identified 685 proteins in ejaculated ram spermatozoa, with the most abundant proteins involved in metabolic pathways. Only 5% of ram sperm proteins were not detected in other species, which suggest highly conserved structures and pathways. Of the proteins present in both epididymal and ejaculated ram spermatozoa, 7% were more abundant in ejaculated spermatozoa. Only two membrane-bound proteins were detected solely in ejaculated sperm lysates: liver enriched gene 1 (LEG1/C6orf58) and epidermal growth factor-like repeats and discoidin I-like domains 3 (EDIL3). This is the first evidence that despite its relatively complex proteomic composition, seminal plasma exposure leads to few novel proteins binding tightly to the ram sperm plasma membrane.

  9. Experimental Study of Cement Mortar-Steel Fiber Reinforced Rammed Earth Wall

    Directory of Open Access Journals (Sweden)

    Shuai Yang

    2012-10-01

    Full Text Available Rammed earth construction is an ancient technique which has recently attracted renewed interest throughout the world. Although rammed earth is currently regarded as a promising material in the construction industry in the context of sustainable development, it is difficult to quantify its bearing capacity, mechanical performance, as well as retrofitting approach, which discourages people from large-scale application in architectural engineering. This paper is devoted to the study of these problems based on rammed earth wall model experimentation. Three different models are studied considering different material components as well as structural configurations. By measuring the strain and deformation of the rammed earth wall models subjected to uniformly-distributed vertical loading, their ultimate bearing capacities are tested based on experimental investigation. Then the method of cement mortar-steel fiber reinforcement (CMSF is carried out to study the ultimate bearing capacity enhancement of the wall models. Results show that the method of cement mortar-steel fiber reinforcement can increase the ultimate bearing capacity of the rammed earth wall models significantly, which is of relevant engineering significance in practical application.

  10. Presence of photoperiod-melatonin-induced, sexually-activated rams in spring advances puberty in autumn-born ewe lambs.

    Science.gov (United States)

    Abecia, J A; Chemineau, P; Gómez, A; Keller, M; Forcada, F; Delgadillo, J A

    2016-07-01

    The objective of this study was to determine the effect of sexually activated (by specific photoperiodic treatments) vasectomized rams on the onset of puberty in autumn-born ewe lambs in spring. Photoperiodic-treated rams were assigned to one of three groups, which were sequentially exposed to two months of long days (16h light/d) and given three melatonin implants at the end of the long days (sexually-activated-rams; SAR): SAR1 (n=5; 1 December-31 January), SAR2 (n=5; 1 Jan-28 February), and SAR3 (n=5; 1 February-31 March). Control rams (CR; n=4) were exposed to the natural photoperiod. On 1 March, 50 ewe lambs born in September were assigned to the SAR rams (SAR-treated; n=25) or the CR rams (CR-treated; n=25). SAR-treated ewe lambs were housed with SAR1 rams from 1 March. SAR2 rams replaced SAR1 rams (14 April), which were replaced by SAR3 rams (22 May) until 30 June. CR-treated ewe lambs were housed with the unstimulated rams. Ovulation was identified by weekly plasma progesterone concentrations and estrous behavior, as indicated by colored rumps. A greater proportion of SAR than CR ewe lambs ovulated in April (52% vs. 0%) and May (68% vs. 0%) (Pewe lambs (277±5 [18 June] and 302±16 [14 July], respectively). In conclusion, the presence of photoperiod-melatonin-induced, sexually activated rams in spring, advanced puberty in autumn-born ewe lambs. Using this technique might provide an effective and sustainable means of increasing the productive life of ewes, while avoiding the use of hormonal treatments. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Wind power

    International Nuclear Information System (INIS)

    2006-06-01

    This road-map proposes by the Group Total aims to inform the public on the wind power. It presents the principles, the technology takes off, its applications and technology focus, the global market trends and the outlooks and Total commitments in the domain. (A.L.B.)

  12. Wind energy

    International Nuclear Information System (INIS)

    Portilla S, L.A.

    1995-01-01

    The wind energy or eolic energy is a consequence of solar energy, the one which is absorbed by the atmosphere and is transformed into energy of movement of large bulks of air. In this process the atmosphere acts as the filter to the solar radiation and demotes the ultraviolet beams that result fatal to life in the Earth. The ionosphere is the most external cap and this is ionized by means of absorption process of ultraviolet radiation arising to the Sun. The atmosphere also acts as a trap to the infrared radiation, it that results from the continual process of energetic degradation. In this way, the interaction between Earth - Atmospheres, is behaved as a great greenhouse, maintaining the constant temperatures, including in the dark nights. Processes as the natural convection (that occur by the thermodynamic phenomenon), equatorial calmness, trade winds and against trade winds and global distribution of the air currents are described. The other hand, techniques as the transformation of the wind into energy and its parameters also are shown

  13. Wind Energy Japan

    Energy Technology Data Exchange (ETDEWEB)

    Komatsubara, Kazuyo [Embassy of the Kingdom of the Netherlands, Tokyo (Japan)

    2012-06-15

    An overview is given of wind energy in Japan: Background; Wind Energy in Japan; Japanese Wind Energy Industry; Government Supports; Useful Links; Major Japanese Companies; Profiles of Major Japanese Companies; Major Wind Energy Projects in Japan.

  14. Ageing of fibre reinforced polymer composite selected as a bearing material for Rams of 540 MWe fuelling machine

    International Nuclear Information System (INIS)

    Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

    2006-01-01

    Fibre-reinforced-polymer-composite material has been suggested as a bearing material to overcome tribological problems witnessed during the testing of Ram assembly of the 540 MWe fuelling machine at RTD. After successful trials at B-Ram the composite material has been adapted for B-RAM, C-Ram and RDB head at fuelling machines being tested at RTD, Hall 7 and at Tarapur. Laboratory evaluations were also carried out at Tribology Lab RTD to study effect of radiation on the composite. Paper deals with the various aspects of life prediction of this material in term of wear and radiation damage. (author)

  15. Generating wind fluctuations for Large Eddy Simulation inflow boundary condition

    International Nuclear Information System (INIS)

    Bekele, S.A.; Hangan, H.

    2004-01-01

    Large Eddy Simulation (LES) studies of flows over bluff bodies immersed in a boundary layer wind environment require instantaneous wind characteristics. The influences of the wind environment on the building pressure distribution are a well-established fact in the experimental study of wind engineering. Measured wind data of full or model scale are available only at a limited number of points. A method of obtaining instantaneous wind data at all mesh points of the inlet boundary for LES computation is necessary. Herein previous and new wind inflow generation techniques are presented. The generated wind data is then applied to a LES computation of a channel flow. The characteristics of the generated wind fluctuations in comparison to the measured data and the properties of the flow field computed from these two wind data are discussed. (author)

  16. The properties of coke breeze briquettes produced by ram briquetting

    Science.gov (United States)

    Loginov, Yu. N.; Babailov, N. A.; Polyansky, L. I.

    2017-12-01

    The paper reports on the results of briquetting coke breeze with a binder in a closed cylindrical press-die. Liquid glass is used as a binder. Approximating curves for the "compaction ratio vs. compaction pressure" dependences are plotted from experimental data. The mechanical properties of the briquettes are determined, namely, drop damage resistance and breaking stress. The results are presented as approximating dependences in the form of a power function.

  17. Nb multilayer planarization technology for a subnanosecond Josephson 1K-bit RAM

    International Nuclear Information System (INIS)

    Nagasawa, S.; Wada, Y.; Tsuge, H.; Hidaka, M.; Ishida, I.; Tahara, S.

    1989-01-01

    Nb multilayer planarization technology has been developed. This planarization technology consists of an etch-back technique using 2000-molecular weight polystyrene and SiO/sub 2/ for the junction layer and wiring layers, and a tapered edge etching technique for contact between individual wiring layers. A Josephson 1K-bit random access memory (RAM) has been fabricated using this planarization technology. Excellent planarity, wherein level differences in all step areas are reduced to less than 1/20th of their original value, was achieved in the multilayer structure of the RAM. Moreover, appropriate RAM operations, with 570ps minimum access time and 13mW power dissipation, were confirmed

  18. Compact Modeling Solutions for Oxide-Based Resistive Switching Memories (OxRAM

    Directory of Open Access Journals (Sweden)

    Marc Bocquet

    2014-01-01

    Full Text Available Emerging non-volatile memories based on resistive switching mechanisms attract intense R&D efforts from both academia and industry. Oxide-based Resistive Random Acces Memories (OxRAM gather noteworthy performances, such as fast write/read speed, low power and high endurance outperforming therefore conventional Flash memories. To fully explore new design concepts such as distributed memory in logic, OxRAM compact models have to be developed and implemented into electrical simulators to assess performances at a circuit level. In this paper, we present compact models of the bipolar OxRAM memory based on physical phenomenons. This model was implemented in electrical simulators for single device up to circuit level.

  19. CAN IBEX DETECT INTERSTELLAR NEUTRAL HELIUM OR OXYGEN FROM ANTI-RAM DIRECTIONS?

    International Nuclear Information System (INIS)

    Galli, A.; Wurz, P.; Park, J.; Kucharek, H.; Möbius, E.; Schwadron, N. A.; Sokół, J. M.; Bzowski, M.; Kubiak, M. A.; Swaczyna, P.; Fuselier, S. A.; McComas, D. J.

    2015-01-01

    To better constrain the parameters of the interstellar neutral flow, we searched the Interstellar Boundary EXplorer (IBEX)-Lo database for helium and oxygen from the interstellar medium in the anti-ram direction in the three years (2009–2011) with the lowest background rates. We found that IBEX-Lo cannot observe interstellar helium from the anti-ram direction because the helium energy is too low for indirect detection by sputtering off the IBEX-Lo conversion surface. Our results show that this sputtering process has a low energy threshold between 25 and 30 eV, whereas the energy of the incident helium is only 10 eV for these observations. Interstellar oxygen, on the other hand, could in principle be detected in the anti-ram hemisphere, but the expected magnitude of the signal is close to the detection limit imposed by counting statistics and by the magnetospheric foreground

  20. Transport of RAM in tanks: how to fit into the IAEA safety philosophy

    International Nuclear Information System (INIS)

    Schulz-Forberg, B.; Ulrich, A.

    1983-01-01

    The transport of radioactive materials (RAM) in tanks will become a field of increasing interest. Especially for substances with low radioactive hazard but may be with subsidary risks which can overrule the RAM-philosophy. The IAEA should pay attention to the problem whether to take over a more active part in the non-nuclear field of transport regulations by influencing and using the outcome of RAM transport conditions or to incorporate some or all provisions for tank transport in their own regulations. The necessity to solve the problems of shipments of substances with low radioactive hazards but high chemical hazards is highlighted by the requirements for UF 6 -cylinders. Up to now UF 6 is listed in class 7 only, but the IAEA requirements for large UF 6 cylinders don't come up to the level of requirements needed for the toxic and corrosive nature of UF 6 . 5 references

  1. Array-level stability enhancement of 50 nm AlxOy ReRAM

    Science.gov (United States)

    Iwasaki, Tomoko Ogura; Ning, Sheyang; Yamazawa, Hiroki; Takeuchi, Ken

    2015-12-01

    ReRAM's low voltage and low current programmability are attractive features to solve the scaling issues of conventional floating gate Flash. However, read instability in ReRAM is a critical issue, due to random telegraph noise (RTN), sensitivity to disturb and retention. In this work, the array-level characteristics of read stability in 50 nm AlxOy ReRAM are investigated and a circuit technique to improve stability is proposed and evaluated. First, in order to quantitatively assess memory cell stability, a method of stability characterization is defined. Next, based on this methodology, a proposal to improve read stability, called ;stability check loop; is evaluated. The stability check loop is a stability verification procedure, by which, instability improvement of 7×, and read error rate improvement of 40% are obtained.

  2. GTL Based Internet of Things Enable Processor Specific RAM Design on 65nm FPGA

    DEFF Research Database (Denmark)

    Moudgil, Aditi; Garg, Kanika; Pandey, Bishwajeet

    2015-01-01

    In this work, we are making Energy Efficient Internet of Things (IoTs) Enable RAM. In order to make it energy efficient, we are using Gunning Transceiver Logic (GTL) IO Standard and Gunning Transceiver Logic Plus (GTLP). We are using the 4 different members of GTL and GTLP IO standards family...... and searching the most energy efficient among them. We observed that when we use 3.6 GHz operating frequency, there is 90.2% reduction in I/O power when we used GTL instead of GTLP_DCI. We are inserting 128-bit IP address in RAM to make internet of things enable RAM. Finally, we are operating our IOTs Enable...

  3. Fuzzy RAM Analysis of the Screening Unit in a Paper Industry by Utilizing Uncertain Data

    Directory of Open Access Journals (Sweden)

    Harish Garg

    2012-01-01

    Full Text Available Reliability, availability, and maintainability (RAM analysis has helped to identify the critical and sensitive subsystems in the production systems that have a major effect on system performance. But the collected or available data, reflecting the system failure and repair patterns, are vague, uncertain, and imprecise due to various practical constraints. Under these circumstances it is difficult, if not possible, to analyze the system performance up to desired degree of accuracy. For this, Artificial Bee Colony based Lambda-Tau (ABCBLT technique has been used for computing the RAM parameters by utilizing uncertain data up to a desired degree of accuracy. Results obtained are compared with the existing Fuzzy Lambda-Tau results and we conclude that proposed results have a less range of uncertainties. Also ranking the subcomponents for improving the performance of the system has been done using RAM-Index. The approach has been illustrated through analyzing the performance of the screening unit of a paper industry.

  4. Review of radiation effects on ReRAM devices and technology

    Science.gov (United States)

    Gonzalez-Velo, Yago; Barnaby, Hugh J.; Kozicki, Michael N.

    2017-08-01

    A review of the ionizing radiation effects on resistive random access memory (ReRAM) technology and devices is presented in this article. The review focuses on vertical devices exhibiting bipolar resistance switching, devices that have already exhibited interesting properties and characteristics for memory applications and, in particular, for non-volatile memory applications. Non-volatile memories are important devices for any type of electronic and embedded system, as they are for space applications. In such applications, specific environmental issues related to the existence of cosmic rays and Van Allen radiation belts around the Earth contribute to specific failure mechanisms related to the energy deposition induced by such ionizing radiation. Such effects are important in non-volatile memory as the current leading technology, i.e. flash-based technology, is sensitive to the total ionizing dose (TID) and single-event effects. New technologies such as ReRAM, if competing with or complementing the existing non-volatile area of memories from the point of view of performance, also have to exhibit great reliability for use in radiation environments such as space. This has driven research on the radiation effects of such ReRAM technology, on both the conductive-bridge RAM as well as the valence-change memories, or OxRAM variants of the technology. Initial characterizations of ReRAM technology showed a high degree of resilience to TID, developing researchers’ interest in characterizing such resilience as well as investigating the cause of such behavior. The state of the art of such research is reviewed in this article.

  5. Performance analysis of STT-RAM with cross shaped free layer using Heusler alloys

    Science.gov (United States)

    Bharat Kumary, Tangudu; Ghosh, Bahniman; Awadhiya, Bhaskar; Verma, Ankit Kumar

    2016-01-01

    We have investigated the performance of a spin transfer torque random access memory (STT-RAM) cell with a cross shaped Heusler compound based free layer using micromagnetic simulations. We have designed a free layer using a Cobalt based Heusler compound. Simulation results clearly show that the switching time from one state to the other state has been reduced, also it has been found that the critical switching current density (to switch the magnetization of the free layer of the STT RAM cell) is reduced.

  6. Error analysis and prevention of cosmic ion-induced soft errors in static CMOS RAMS

    International Nuclear Information System (INIS)

    Diehl, S.E.; Ochoa, A. Jr.; Dressendorfer, P.V.; Koga, R.; Kolasinski, W.A.

    1982-06-01

    Cosmic ray interactions with memory cells are known to cause temporary, random, bit errors in some designs. The sensitivity of polysilicon gate CMOS static RAM designs to logic upset by impinging ions has been studied using computer simulations and experimental heavy ion bombardment. Results of the simulations are confirmed by experimental upset cross-section data. Analytical models have been extended to determine and evaluate design modifications which reduce memory cell sensitivity to cosmic ions. A simple design modification, the addition of decoupling resistance in the feedback path, is shown to produce static RAMs immune to cosmic ray-induced bit errors

  7. Optical RAM-enabled cache memory and optical routing for chip multiprocessors: technologies and architectures

    Science.gov (United States)

    Pleros, Nikos; Maniotis, Pavlos; Alexoudi, Theonitsa; Fitsios, Dimitris; Vagionas, Christos; Papaioannou, Sotiris; Vyrsokinos, K.; Kanellos, George T.

    2014-03-01

    The processor-memory performance gap, commonly referred to as "Memory Wall" problem, owes to the speed mismatch between processor and electronic RAM clock frequencies, forcing current Chip Multiprocessor (CMP) configurations to consume more than 50% of the chip real-estate for caching purposes. In this article, we present our recent work spanning from Si-based integrated optical RAM cell architectures up to complete optical cache memory architectures for Chip Multiprocessor configurations. Moreover, we discuss on e/o router subsystems with up to Tb/s routing capacity for cache interconnection purposes within CMP configurations, currently pursued within the FP7 PhoxTrot project.

  8. TiO$_2$-based Memristors and ReRAM: Materials, Mechanisms and Models (a Review)

    OpenAIRE

    Gale, Ella

    2016-01-01

    The memristor is the fundamental non-linear circuit element, with uses in computing and computer memory. ReRAM (Resistive Random Access Memory) is a resistive switching memory proposed as a non-volatile memory. In this review we shall summarise the state of the art for these closely-related fields, concentrating on titanium dioxide, the well-utilised and archetypal material for both. We shall cover material properties, switching mechanisms and models to demonstrate what ReRAM and memristor sc...

  9. Software for dimensioning of hydraulic ram; Software para dimensionamento de carneiro hidraulico

    Energy Technology Data Exchange (ETDEWEB)

    Borges Neto, Manuel Rangel [Centro Federal de Educacao Tecnologica de Petrolina, CE (Brazil); Borges, Grace Anne Pontes [Faculdade de Tecnologia de Sao Paulo (FATEC), Sao Paulo, SP (Brazil). Dept. de Processamento de Dados; Borges, Everton Pontes [Centro Federal de Educacao Tecnologica do Rio Grande do Norte, Natal, RN (Brazil). Curso Tecnologia em Automacao Industrial

    2004-07-01

    The search for new renewable energy sources sometimes takes us always from existing solutions applications. The hydraulic ram is equipment developed in 1796, used to water pumping, without using electricity energy and can be used for small rural producer in places where the conventional electricity grid access is limited. The objective of this work is Software introducing, developed to help a commercial hydraulic ram dimensioning, which isn't necessary previous hydraulic knowledge, and can also be used as a didactic resource at technicians and technologists courses in subjects as hydraulics or irrigation. (author)

  10. Purification of beta-acetylglucosaminase and beta-galactosidase from ram testis.

    Science.gov (United States)

    Caygill, J C; Roston, C P; Jevons, F R

    1966-02-01

    1. The presence of beta-galactosidase (EC 3.2.1.23) in an acetic acid extract of ram testis is reported. Some properties of the crude enzyme preparation were studied. 2. The purification of beta-acetylglucosaminase (EC 3.2.1.30) and of beta-galactosidase from the ram-testis extract by ammonium sulphate precipitation and chromatography on a CM-cellulose column is described. 3. The final purifications of the separated enzymes achieved were for the beta-acetylglucosaminase 35 times and for the beta-galactosidase 99 times. 4. The possibility of using DEAE-cellulose and Sephadex G-200 to purify the enzymes was investigated.

  11. Stellar winds

    International Nuclear Information System (INIS)

    Weymann, R.J.

    1978-01-01

    It is known that a steady outflow of material at comparable rates of mass loss but vastly different speeds is now known to be ubiquitous phenomenon among both the luminous hot stars and the luminous but cool red giants. The flows are probably massive enough in both cases to give rise to significant effects on stellar evolution and the mass balance between stars and the interstellar medium. The possible mechanisms for these phenomena as well as the methods of observation used are described. In particular, the mass-loss processes in stars other than the sun that also involve a steady flow of matter are considered. The evidence for their existence is described, and then the question of whether the process thought to produce the solar wind is also responsible for producing these stellar winds is explored

  12. Role of the GRAS transcription factor ATA/RAM1 in the transcriptional reprogramming of arbuscular mycorrhiza in Petunia hybrida.

    Science.gov (United States)

    Rich, Mélanie K; Courty, Pierre-Emmanuel; Roux, Christophe; Reinhardt, Didier

    2017-08-08

    Development of arbuscular mycorrhiza (AM) requires a fundamental reprogramming of root cells for symbiosis. This involves the induction of hundreds of genes in the host. A recently identified GRAS-type transcription factor in Petunia hybrida, ATA/RAM1, is required for the induction of host genes during AM, and for morphogenesis of the fungal endosymbiont. To better understand the role of RAM1 in symbiosis, we set out to identify all genes that depend on activation by RAM1 in mycorrhizal roots. We have carried out a transcript profiling experiment by RNAseq of mycorrhizal plants vs. non-mycorrhizal controls in wild type and ram1 mutants. The results show that the expression of early genes required for AM, such as the strigolactone biosynthetic genes and the common symbiosis signalling genes, is independent of RAM1. In contrast, genes that are involved at later stages of symbiosis, for example for nutrient exchange in cortex cells, require RAM1 for induction. RAM1 itself is highly induced in mycorrhizal roots together with many other transcription factors, in particular GRAS proteins. Since RAM1 has previously been shown to be directly activated by the common symbiosis signalling pathway through CYCLOPS, we conclude that it acts as an early transcriptional switch that induces many AM-related genes, among them genes that are essential for the development of arbuscules, such as STR, STR2, RAM2, and PT4, besides hundreds of additional RAM1-dependent genes the role of which in symbiosis remains to be explored. Taken together, these results indicate that the defect in the morphogenesis of the fungal arbuscules in ram1 mutants may be an indirect consequence of functional defects in the host, which interfere with nutrient exchange and possibly other functions on which the fungus depends.

  13. Wind conditions for wind turbine design

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B.

    1999-04-01

    Delegates from Europe and USA attended the meeting and discussed general aspects of wind conditions for wind turbine design. The subjects and the presented papers covered a very broad range of aspects of wind conditions and related influence on the wind turbine. (EHS)

  14. Wind power variations under humid and arid meteorological conditions

    International Nuclear Information System (INIS)

    Şen, Zekâi

    2013-01-01

    Highlights: • It indicates the role of weather parameters’ roles in the wind energy calculation. • Meteorological variables are more significant in arid regions for wind power. • It provides opportunity to take into consideration air density variability. • Wind power is presented in terms of the wind speed, temperature and pressure. - Abstract: The classical wind power per rotor area per time is given as the half product of the air density by third power of the wind velocity. This approach adopts the standard air density as constant (1.23 g/cm 3 ), which ignores the density dependence on air temperature and pressure. Weather conditions are not taken into consideration except the variations in wind velocity. In general, increase in pressure and decrease in temperature cause increase in the wind power generation. The rate of increase in the pressure has less effect on the wind power as compared with the temperature rate. This paper provides the wind power formulation based on three meteorological variables as the wind velocity, air temperature and air pressure. Furthermore, from the meteorology point of view any change in the wind power is expressed as a function of partial changes in these meteorological variables. Additionally, weather conditions in humid and arid regions differ from each other, and it is interesting to see possible differences between the two regions. The application of the methodology is presented for two meteorology stations in Istanbul, Turkey, as representative of the humid regions and Al-Madinah Al-Monawwarah, Kingdom of Saudi Arabia, for arid region, both on daily record bases for 2010. It is found that consideration of air temperature and pressure in the average wind power calculation gives about 1.3% decrease in Istanbul, whereas it is about 13.7% in Al-Madinah Al-Monawwarah. Hence, consideration of meteorological variables in wind power calculations becomes more significant in arid regions

  15. Winding of fibre composites; Vikling af fiberkompositter

    Energy Technology Data Exchange (ETDEWEB)

    Lystrup, Aage

    2006-01-01

    Within the project 'Storage of hydrogen in advanced high pressure vessels' under the PSO-R AND D 2005 program one of the tasks is to describe the technology, which is used for manufacturing of fibre reinforced pressure vessels. Fibre reinforced pressure vessels for high pressures are manufactured by winding structural load bearing fibres around a mandrel or an internal liner. There are two different types of cylindrical pressure vessels: 1) Cylinders with thick metal liner, where only the cylindrical part is over wrapped with hoop windings, and 2) cylinders with a thin metal or polymer liner, where both the cylindrical part and the end domes are over wrapped with more layers with different fibre orientations (helical and hoop windings). This report describes the fundamental principles for filament winding of fibre reinforced polymer composites. After a short introduction to the advanced fibre composites, their properties and semi-raw materials used for fibre composites, the focus is on the process parameters, which have influence on the material quality of filament wound components. The report is both covering winding of fibre reinforced thermo-setting polymers as well as thermoplastic polymers, and there are references to vendors of filament winding machines, accessory equipment and computer software for design and manufacturing of filament wound components. (au)

  16. OPTIMISATION OF WIND TURBINE WITH DIFFUSER USING CFD TOOL

    OpenAIRE

    Mr. K Prakash, R.Sreeju , S.Vijaychandran, A.R.Sridharan

    2017-01-01

    A wind turbine or wind power plant is a device that converts kinetic energy from the wind into electric current. Mechanical energy is simply created when the wind turbine blades spin and a generator is turned, thus producing electricity. Diffuser can increase turbine power output primarily by increasing mass flow rate through the blades because of controlled diffusion of the turbine wake which which lowers the exit plane pressure considerably below atmospheric, and secondarily by reducing bla...

  17. Wind prices are down - but are they too low?

    International Nuclear Information System (INIS)

    Milborrow, D.

    1998-01-01

    The highly competitive nature of the NFFO and SRO bidding processes may be putting undue pressure on manufacturers' profit margins, restricting funds for investment and RandD. Taking the wider view, RandD in the wind industry is very modest relative to its output. Nevertheless, the wind industry is delivering increasingly reliable and cost effective wind turbines. The needs for further RandD are critically examined and the paper includes assessments of future wind energy price trends. (Author)

  18. Practical method for estimating wind characteristics at potential wind-energy-conversion sites

    Energy Technology Data Exchange (ETDEWEB)

    Endlich, R. M.; Ludwig, F. L.; Bhumralkar, C. M.; Estoque, M. A.

    1980-08-01

    Terrain features and variations in the depth of the atmospheric boundary layer produce local variations in wind, and these variations are not depicted well by standard weather reports. A method is developed to compute local winds for use in estimating the wind energy available at any potential site for a wind turbine. The method uses the terrain heights for an area surrounding the site and a series of wind and pressure reports from the nearest four or five national Weather Service stations. An initial estimate of the winds in the atmospheric boundary layer is made, then these winds are adjusted to satisfy the continuity equation. In this manner the flow is made to reflect the influences of the terrain and the shape of the boundary-layer top. This report describes in detail the methodology and results, and provides descriptions of the computer programs, instructions for using them, and complete program listings.

  19. Wind Extraction for Natural Ventilation

    Science.gov (United States)

    Fagundes, Tadeu; Yaghoobian, Neda; Kumar, Rajan; Ordonez, Juan

    2017-11-01

    Due to the depletion of energy resources and the environmental impact of pollution and unsustainable energy resources, energy consumption has become one of the main concerns in our rapidly growing world. Natural ventilation, a traditional method to remove anthropogenic and solar heat gains, proved to be a cost-effective, alternative method to mechanical ventilation. However, while natural ventilation is simple in theory, its detailed design can be a challenge, particularly for wind-driven ventilation, which its performance highly involves the buildings' form, surrounding topography, turbulent flow characteristics, and climate. One of the main challenges with wind-driven natural ventilation schemes is due to the turbulent and unpredictable nature of the wind around the building that impose complex pressure loads on the structure. In practice, these challenges have resulted in founding the natural ventilation mainly on buoyancy (rather than the wind), as the primary force. This study is the initial step for investigating the physical principals of wind extraction over building walls and investigating strategies to reduce the dependence of the wind extraction on the incoming flow characteristics and the target building form.

  20. Wind effect in turbulence parametrization

    Science.gov (United States)

    Colombini, M.; Stocchino, A.

    2005-09-01

    The action of wind blowing over a closed basin ultimately results in a steady shear-induced circulation pattern and in a leeward rising of the free surface—and a corresponding windward lowering—known as wind set-up. If the horizontal dimensions of the basin are large with respect to the average flow depth, the occurrence of local quasi-equilibrium conditions can be expected, i.e. the flow can be assumed to be locally driven only by the wind stress and by the opposing free surface gradient due to set-up. This wind-induced flow configuration shows a strong similarity with turbulent Couette-Poiseuille flow, the one dimensional flow between parallel plates generated by the simultaneous action of a constant pressure gradient and of the shear induced by the relative motion of the plates. A two-equation turbulence closure is then employed to perform a numerical study of turbulent Couette-Poiseuille flows for different values of the ratio of the shear stresses at the two walls. The resulting eddy viscosity vertical distributions are analyzed in order to devise analytical profiles of eddy viscosity that account for the effect of wind. The results of this study, beside allowing for a physical insight on the turbulence process of this class of flows, will allow for a more accurate description of the wind effect to be included in the formulation of quasi-3D and 3D models of lagoon hydrodynamics.

  1. Timber RAM. . .a long-range planning method for commercial timber lands under multiple-use management

    Science.gov (United States)

    Daniel I. Navon

    1971-01-01

    Timber RAM (Resource Allocation Method) is a long-range planning method for commercial timber lands under multiple-use management. Timber RAM can produce cutting and reforestation schedules and related harvest and economic reports. Each schedule optimizes an index of performance, subject to periodic constraints on revenues, costs, and, harvest levels. Periodic...

  2. Wind Technologies & Evolving Opportunities (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, R.

    2014-07-01

    This presentation covers opportunities for wind technology; wind energy market trends; an overview of the National Wind Technology Center near Boulder, Colorado; wind energy price and cost trends; wind turbine technology improvements; and wind resource characterization improvements.

  3. A Simplified Model of an Offset Ram Press for Sunflower Oil ...

    African Journals Online (AJOL)

    A force analysis of the press was performed for several successive positions of the driving lever (handle) and for a range of values of certain dimensionless parameters that influence the performance of this mechanism. Because the ram press is a low speed machine, static analysis was employed, and the equations ...

  4. SSTL based thermal and power efficient RAM design on 28nm FPGA for spacecraft

    DEFF Research Database (Denmark)

    Kalia, Kartik; Pandey, Bishwajeet; Hussain, D. M.A.

    2016-01-01

    In this paper, an approach is made to design a Thermal and Power efficient RAM for that reason we have used DDR4L memory and six different members of SSTL I/Os standards on 28nm technology. Every spacecraft requires most energy efficient electronic system and for that very purpose we have designed...... the most energy efficient RAM. In this design, we have taken two main parameters for analysis that is frequency (1600 MHz) and Voltage (1.05V). DDR4L operates at the lowest Voltage compared to available RAM's. Environment (LFM, Heat Sink, and Capacitance) is kept constant. For the simulation of the logic......, Xilinx is used with Verilog as hardware description language. We have done our analysis with different I/O standards for DDR4L RAM. When we scale down from 288.15K to 348.15K there is maximum total power reduction in SSTL135-R as compared to all considered I/O standards. When we compared different...

  5. An energy and cost efficient majority-based RAM cell in quantum-dot cellular automata

    Directory of Open Access Journals (Sweden)

    Milad Bagherian Khosroshahy

    Full Text Available Nanotechnologies, notably quantum-dot cellular automata, have achieved major attentions for their prominent features as compared to the conventional CMOS circuitry. Quantum-dot cellular automata, particularly owning to its considerable reduction in size, high switching speed and ultra-low energy consumption, is considered as a potential alternative for the CMOS technology. As the memory unit is one of the most essential components in a digital system, designing a well-optimized QCA random access memory (RAM cell is an important area of research. In this paper, a new five-input majority gate is presented which is suitable for implementing efficient single-layer QCA circuits. In addition, a new RAM cell with set and reset capabilities is designed based on the proposed majority gate, which has an efficient and low-energy structure. The functionality, performance and energy consumption of the proposed designs are evaluated based on the QCADesigner and QCAPro tools. According to the simulation results, the proposed RAM design leads to on average 38% lower total energy dissipation, 25% smaller area, 20% lower cell count, 28% lower delay and 60% lower QCA cost as compared to its previous counterparts. Keywords: Quantum-dot cellular automata (QCA, Majority gate, Random access memory (RAM, Energy efficiency

  6. CMOS/SOS RAM transient radiation upset and ''inversion'' effect investigation

    International Nuclear Information System (INIS)

    Nikiforov, A.Y.; Poljakov, I.V.

    1996-01-01

    The Complementary Metal-Oxide-Semiconductor/Silicon-on-Sapphire Random Access Memory (CMOS/SOS RAM) transient upset and inversion effect were investigated with pulsed laser, pulsed voltage generator and low-intensity light simulators. It was found that the inversion of information occurs due to memory cell photocurrents simultaneously with the power supply voltage drop transfer to memory cells outputs

  7. Imaging through atmospheric turbulence for laser based C-RAM systems: an analytical approach

    Science.gov (United States)

    Buske, Ivo; Riede, Wolfgang; Zoz, Jürgen

    2013-10-01

    High Energy Laser weapons (HEL) have unique attributes which distinguish them from limitations of kinetic energy weapons. HEL weapons engagement process typical starts with identifying the target and selecting the aim point on the target through a high magnification telescope. One scenario for such a HEL system is the countermeasure against rockets, artillery or mortar (RAM) objects to protect ships, camps or other infrastructure from terrorist attacks. For target identification and especially to resolve the aim point it is significant to ensure high resolution imaging of RAM objects. During the whole ballistic flight phase the knowledge about the expectable imaging quality is important to estimate and evaluate the countermeasure system performance. Hereby image quality is mainly influenced by unavoidable atmospheric turbulence. Analytical calculations have been taken to analyze and evaluate image quality parameters during an approaching RAM object. In general, Kolmogorov turbulence theory was implemented to determine atmospheric coherence length and isoplanatic angle. The image acquisition is distinguishing between long and short exposure times to characterize tip/tilt image shift and the impact of high order turbulence fluctuations. Two different observer positions are considered to show the influence of the selected sensor site. Furthermore two different turbulence strengths are investigated to point out the effect of climate or weather condition. It is well known that atmospheric turbulence degenerates image sharpness and creates blurred images. Investigations are done to estimate the effectiveness of simple tip/tilt systems or low order adaptive optics for laser based C-RAM systems.

  8. Los hombres. Juan Ramón Jiménez y Jaime Robledo Uribe

    Directory of Open Access Journals (Sweden)

    Boletín Cultural y Bibliográfico Banco de la República

    1958-05-01

    Full Text Available En el documento se realiza sendas notas de conmemoración  del fallecimiento de don Juan Ramón Jiménez  y don Jaime Robledo Uribe. Esta pequeña nota tiene como fin realizar un homenaje a tan reputados miembros del círculo cultural del país.

  9. Santiago Ramón y Cajal and Harvey Cushing: two forefathers of neuroscience and neurosurgery.

    Science.gov (United States)

    Zamora-Berridi, Grettel J; Pendleton, Courtney; Ruiz, Gabriel; Cohen-Gadol, Aaron A; Quiñones-Hinojosa, Alfredo

    2011-11-01

    To summarize the extraordinary accomplishments, and the commonalities, between Santiago Ramon y Cajal and Harvey Williams Cushing. Existing literature describing the lives and achievements of Ramón y Cajal and Cushing, as well as personal communication, and the surgical records of the Johns Hopkins Hospital, from 1896 to 1912, were reviewed. Both Ramón y Cajal and Cushing were men of unusually broad interests and talents, and these shared characteristics undoubtedly influenced the career paths and scientific investigations they pursued. Although Santiago Ramón y Cajal and Harvey Williams Cushing never directly interacted, the links between them can be traced through some of their disciples, including Pío del Río Hortega, Wilder Penfield, and Percival Bailey. Ramón y Cajal and Cushing are widely considered the forefathers of neuroscience and neurosurgery, respectively, and their discoveries have made lasting impressions on both the scientific and medical communities. Copyright © 2011 Elsevier Inc. All rights reserved.

  10. Preliminary report on a novel straw semen freezing method for ram ...

    African Journals Online (AJOL)

    A straw (0.25ml French) semen freezing method for ram spermatozoa using a temperartre controlled stainless steel plate is described to possibly replace the conventional static liquid nitrogen vapour freezing method. 'n Strooitjie (0.25ml Franse) semenvriesmetode vir ramspermatosoa deur gebruikmaking van 'n ...

  11. Abnormalities of the testes and epididymis in bucks and rams slaughtered at Debre Zeit abattoir, Ethiopia.

    Science.gov (United States)

    Regassa, F; Terefe, F; Bekana, M

    2003-12-01

    A study was conducted at Debre Zeit export abattoir on 404 bucks belonging to four breeds and 167 rams of two breeds. The animals were selected from the slaughter flock using stratified sampling based on breed. Ante-mortem and post-mortem examinations were carried out after each animal was carefully identified. Various genital abnormalities were observed, among which testicular atrophy and epididymitis were the predominant genital problems in both bucks and rams. The prevalence of cryptorchidism was higher (p0.05). However, testicular atrophy (p<0.01), epididymitis (p<0.01) and haemorrhagic lesions (p<0.05) were associated with breed, the prevalence being higher in Woito-Guji and Boran bucks than in the Arsi-Bale and Afar breeds. In rams, age affected (p<0.05) the incidence of testicular atrophy, epididymitis and sperm granulomas. Epididymitis, sperm granuloma and epididymal cysts were more frequent (p<0.01) in Adal rams than in Black Head Somalis.

  12. Species-specific nested PCR as a diagnostic tool for Brucella ovis infection in rams

    Directory of Open Access Journals (Sweden)

    L.F. Costa

    2013-02-01

    Full Text Available The aim of the present study was to evaluate a species-specific nested PCR based on a previously described species-specific PCR for detection of B. ovis in semen and urine samples of experimentally infected rams. The performance of the species-specific nested PCR was compared with the results of a genus-specific PCR. Fourteen rams were experimentally infected with the Brucella ovis REO 198 strain and samples of semen and urine were collected every week up to 180 days post infection. Out of 83 semen samples collected, 42 (50.6% were positive for the species-specific nested PCR, and 23 (27.7% were positive for the genus-specific PCR. Out of 75 urine samples, 49 (65.3% were positive for the species-specific nested PCR, whereas 11 (14.6% were genus-specific PCR positive. Species-specific nested PCR was significantly more sensitive (P<0.001 than the genus-specific PCR in semen and urine from experimentally infected rams. In conclusion, the species-specific nested PCR developed in this study may be used as a diagnostic tool for the detection of B. ovis in semen and urine samples from suspected rams.

  13. Effect of Diarrheastat® and Enrosol-S® on rumen ecosystem in rams

    Directory of Open Access Journals (Sweden)

    M. O. Abdul-Majeed

    2011-01-01

    Full Text Available The effect of two antimicrobials (Diarrheastat® and Enrosol-S® on sheep rumen ecosystem (pH, viscosity, microbial activity and protozoal activity was investigated in adult rams. The rams were randomly divided into two groups; each group included four rams dosaged orally one time daily for three successive days according to the manufacturer recommendations. Ruminal fluid was analyzed before dosage, after 24 hrs of the first, second and third doses, and after 3, 7 and 10 days after the last dose (3rd dose. No significant differences in ruminal fluid pH and viscosity with oral antimicrobial administration were noticed. Microbial activity tests used (methylene blue reduction test and floatation/sedimentation test showed a significant reduction of microbial activity of rumen (P<0.05 without differences in staining characters of bacterial population. Protozoal activity of the rumen was influenced significantly (P<0.05 by oral antimicrobials with some differences between Diarrheastat® and Enrosol-S®. It was concluded from this study that dosing of Diarrheastat® and Enrosol-S® orally to rams one time daily for three successive days had an obvious effects on microbial and protozoal activity of the rumen.

  14. A study on gastrointestinal tract characteristics of ram lambs at the ...

    African Journals Online (AJOL)

    rumens and intestinal capacities (relative to body weight) of ram lambs from six Turkish sheep breeds: Turkish Merino (TM, Anatolia Merino), Akkaraman (AK), Kıvırcık (KV), Awassi (AW), Karayaka (KY) and Morkaraman (MK), and second, ...

  15. A study on testicular characteristics of ram lambs of Arsi breed fed ...

    African Journals Online (AJOL)

    The effect of feeding two maize (Zea mays) varieties (Quality Protein Maize [QPM] and common maize [BH540]) on testicular characteristics of ram lambs was studied in the indigenous Arsi sheep breed. The two maize varieties were fed in whole plant silage (WPS), earless silage (ELS) and stover (S) forms for a period of 12 ...

  16. CRYOPRESERVATION OF RAM SPERM FROM AUTOCHTHONOUS BREEDS DURING A NON-MATING SEASON

    Directory of Open Access Journals (Sweden)

    Milko SABEV

    2007-07-01

    Full Text Available It is possible to collect and successfully cryopreserve ejaculates in a non-mating season from rams of the autochthonous breeds Karakachan, Cooper-red Shumen and Karnobat-local, raised in Bulgaria. Studies are in progress aiming the elaboration of optimal cryoprotective extenders and freezing technology.

  17. Mutations in the RAM network confer resistance to the thiol oxidant 4,4'-dipyridyl disulfide

    DEFF Research Database (Denmark)

    López-Mirabal, H Reynaldo; Winther, Jakob R; Thorsen, Michael

    2008-01-01

    -specific oxidant dipyridyl disulfide (DPS) yielded tao3-516, which is impaired in the function of the RAM signaling network protein Tao3/Pag1p. We suggest that the DPS-resistance of the tao3-516 mutant might be due to deficient cell-cycle-regulated production of the chitinase Cts1p, which functions in post......-mitotic cell separation and depends on Tao3p and the RAM network for regulated expression. Consistent with this, deletion of other RAM genes or CTS1 also resulted in increased resistance to DPS. Exposure to DPS caused extensive depolarization of the actin cytoskeleton. We found that tao3-516 is resistant...... to latrunculin, a specific inhibitor of actin polymerization, and that ram, Deltaace2, and Deltacts1 mutants are resistant to benomyl, a microtubule-destabilizing drug. Since septum build-up depends on the organization of cytoskeletal proteins, the resistance to cytoskeletal stress of Cts1p-deficient mutants...

  18. Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.

    Science.gov (United States)

    Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan

    2017-09-01

    Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.

  19. On the sexual cycle of mature bachelor bontebok rams at the ...

    African Journals Online (AJOL)

    On the sexual cycle of mature bachelor bontebok rams at the Bontebok National Park, Swellendam. J.D. Skinner, H.M. Dott, V de Vos, R.P. Millar. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO ...

  20. Probability based calibration of pressure coefficients

    DEFF Research Database (Denmark)

    Hansen, Svend Ole; Pedersen, Marie Louise; Sørensen, John Dalsgaard

    2015-01-01

    .3, the Eurocode partial factor of 1.5 for variable actions agrees well with the inherent uncertainties of wind actions when the pressure coefficients are determined using wind tunnel test results. The increased bias and uncertainty when pressure coefficients mainly are based on structural codes lead to a larger...

  1. Wind loads on flat plate photovoltaic array fields

    Science.gov (United States)

    Miller, R. D.; Zimmerman, D. K.

    1981-01-01

    The results of an experimental analysis (boundary layer wind tunnel test) of the aerodynamic forces resulting from winds acting on flat plate photovoltaic arrays are presented. Local pressure coefficient distributions and normal force coefficients on the arrays are shown and compared to theoretical results. Parameters that were varied when determining the aerodynamic forces included tilt angle, array separation, ground clearance, protective wind barriers, and the effect of the wind velocity profile. Recommended design wind forces and pressures are presented, which envelop the test results for winds perpendicular to the array's longitudinal axis. This wind direction produces the maximum wind loads on the arrays except at the array edge where oblique winds produce larger edge pressure loads. The arrays located at the outer boundary of an array field have a protective influence on the interior arrays of the field. A significant decrease of the array wind loads were recorded in the wind tunnel test on array panels located behind a fence and/or interior to the array field compared to the arrays on the boundary and unprotected from the wind. The magnitude of this decrease was the same whether caused by a fence or upwind arrays.

  2. Incorporating geostrophic wind information for improved space–time short-term wind speed forecasting

    KAUST Repository

    Zhu, Xinxin

    2014-09-01

    Accurate short-term wind speed forecasting is needed for the rapid development and efficient operation of wind energy resources. This is, however, a very challenging problem. Although on the large scale, the wind speed is related to atmospheric pressure, temperature, and other meteorological variables, no improvement in forecasting accuracy was found by incorporating air pressure and temperature directly into an advanced space-time statistical forecasting model, the trigonometric direction diurnal (TDD) model. This paper proposes to incorporate the geostrophic wind as a new predictor in the TDD model. The geostrophic wind captures the physical relationship between wind and pressure through the observed approximate balance between the pressure gradient force and the Coriolis acceleration due to the Earth’s rotation. Based on our numerical experiments with data from West Texas, our new method produces more accurate forecasts than does the TDD model using air pressure and temperature for 1to 6-hour-ahead forecasts based on three different evaluation criteria. Furthermore, forecasting errors can be further reduced by using moving average hourly wind speeds to fit the diurnal pattern. For example, our new method obtains between 13.9% and 22.4% overall mean absolute error reduction relative to persistence in 2-hour-ahead forecasts, and between 5.3% and 8.2% reduction relative to the best previous space-time methods in this setting.

  3. Wind Power Meteorology

    DEFF Research Database (Denmark)

    Lundtang Petersen, Erik; Mortensen, Niels Gylling; Landberg, Lars

    Wind power meteorology has evolved as an applied science, firmly founded on boundary-layer meteorology, but with strong links to climatology and geography. It concerns itself with three main areas: siting of wind turbines, regional wind resource assessment, and short-term prediction of the wind...... resource. The history, status and perspectives of wind power meteorology are presented, with emphasis on physical considerations and on its practical application. Following a global view of the wind resource, the elements of boundary layer meteorology which are most important for wind energy are reviewed......: wind profiles and shear, turbulence and gust, and extreme winds. The data used in wind power meteorology stem mainly from three sources: onsite wind measurements, the synoptic networks, and the re-analysis projects. Wind climate analysis, wind resource estimation and siting further require a detailed...

  4. Effects of Agricultural Byproducts in Ration on Productive and Reproductive Performance of Saidi Rams

    Directory of Open Access Journals (Sweden)

    G. A. Megahed

    2006-01-01

    Full Text Available The influence of selected agricultural byproducts supplementation to feed rations on the ram's body gain, reproductive performance, and subsequent fertility were investigated. Forty Saidi rams were divided into 4 groups (n = 10. Group 1 (control was fed 500 g/head/day concentrate feed mixtures (CFM plus wheat straw ad libitum. Groups 2, 3 and 4 were fed 500 g/head/day CFM plus corn cobs or sugar cane tops or sugar cane bagasse (these roughages were treated with 1% urea, respectively. Serum testosterone, glucose and total cholesterol levels were determined and semen evaluations were carried out every 15 days. Testicular size, scrotal circumference and body weight were recorded each month. At the end of the experiment, 12 rams were allowed to mount 114 healthy ewes to evaluate the pregnancy rate for each group. The results have shown that the body weight, daily body gain, testicular size and scrotal circumference increased (p p p < 0.01 as compared with group 1 (1.76 ± 0.09 ng/ml. Moreover, supplementation of treated agricultural byproducts had a significant improving effects on the semen quality. The semen volume increased, along with individual motility and live sperm percentages. Pregnancy rate in this study indicated that rams of groups 2, 3 and 4 yielded a higher pregnancy rate (83.33%, 86.67% and 81.48%, respectively than group 1 (74.07%. Agricultural byproducts such as corn cobs, sugar cane tops and sugar cane bagasse treated with 1% urea had a beneficial effect on the daily body gain and improved the reproductive performance and subsequent fertility of Saidi rams, compared to wheat straw.

  5. Optical RAM row access using WDM-enabled all-passive row/column decoders

    Science.gov (United States)

    Papaioannou, Sotirios; Alexoudi, Theoni; Kanellos, George T.; Miliou, Amalia; Pleros, Nikos

    2014-03-01

    Towards achieving a functional RAM organization that reaps the advantages offered by optical technology, a complete set of optical peripheral modules, namely the Row (RD) and Column Decoder (CD) units, is required. In this perspective, we demonstrate an all-passive 2×4 optical RAM RD with row access operation and subsequent all-passive column decoding to control the access of WDM-formatted words in optical RAM rows. The 2×4 RD exploits a WDM-formatted 2-bit-long memory WordLine address along with its complementary value, all of them encoded on four different wavelengths and broadcasted to all RAM rows. The RD relies on an all-passive wavelength-selective filtering matrix (λ-matrix) that ensures a logical `0' output only at the selected RAM row. Subsequently, the RD output of each row drives the respective SOA-MZI-based Row Access Gate (AG) to grant/block the entry of the incoming data words to the whole memory row. In case of a selected row, the data word exits the row AG and enters the respective CD that relies on an allpassive wavelength-selective Arrayed Waveguide Grating (AWG) for decoding the word bits into their individual columns. Both RD and CD procedures are carried out without requiring any active devices, assuming that the memory address and data word bits as well as their inverted values will be available in their optical form by the CPU interface. Proof-of-concept experimental verification exploiting cascaded pairs of AWGs as the λ-matrix is demonstrated at 10Gb/s, providing error-free operation with a peak power penalty lower than 0.2dB for all optical word channels.

  6. Detecting asymptomatic rams infected with Mycoplasma agalactiae in ovine artificial insemination centers.

    Science.gov (United States)

    Prats-van der Ham, Miranda; Tatay-Dualde, Juan; de la Fe, Christian; Paterna, Ana; Sánchez, Antonio; Corrales, Juan Carlos; Contreras, Antonio; Gómez-Martín, Ángel

    2017-02-01

    Mycoplasma agalactiae (Ma) is the main causative agent of ovine contagious agalactia, which is a serious disease of small ruminants. In endemic areas, its most common clinical situation consists of chronically infected herds, and asymptomatic infected individuals represent an epidemiological risk regarding the transmission of this disease. The aim of this work was to detect the presence of asymptomatic rams infected with Ma in different artificial insemination centers, and to determine the most effective way to identify these individuals so as to implement adequate surveillance protocols. For this purpose, 215 rams and 14 teaser sheep were sampled taking auricular, nasal, and vaginal swabs and serum samples. In addition, ejaculates from 147 rams were analyzed. These samples were subjected to specific culture and molecular techniques to isolate and identify mycoplasmas, and to a serological test to detect antibodies against Ma. Mycoplasma agalactiae was detected in 47 (4.4%) of the 1077 samples analyzed, and also one individual resulted seropositive. Thus, 37 (17.2%) of the 215 studied rams were infected with Ma. The specimens which proportionally yielded the greatest number of positive results for this pathogen were semen samples (13.6%), followed by nasal swabs (5.8%). In contrast, the sampling of the external auricular canal and the serological analyses resulted insufficient to effectively detect infected individuals. Asymptomatic rams infected with Ma were detected in all the analyzed artificial insemination centers, highlighting the need to implement adequate surveillance protocols to prevent the presence of these individuals in these centers, reducing the risk of transmitting contagious agalactia. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Engineered biosynthesis of enduracidin lipoglycopeptide antibiotics using the ramoplanin mannosyltransferase Ram29.

    Science.gov (United States)

    Wu, Ming-Cheng; Styles, Matthew Q; Law, Brian J C; Struck, Anna-Winona; Nunns, Laura; Micklefield, Jason

    2015-07-01

    The lipopeptides ramoplanin from Actinoplanes sp. ATCC 33076 and enduracidin produced by Streptomyces fungicidicus are effective antibiotics against a number of drug-resistant Gram-positive pathogens. While these two antibiotics share a similar cyclic peptide structure, comprising 17 amino acids with an N-terminal fatty acid side chain, ramoplanin has a di-mannose moiety that enduracidin lacks. The mannosyl substituents of ramoplanin enhance aqueous solubility, which was important in the development of ramoplanin as a potential treatment for Clostridium difficile infections. In this study we have determined the function of the putative mannosyltransferase encoded by ram29 from the ramoplanin biosynthetic gene cluster. Bioinformatics revealed that Ram29 is an integral membrane protein with a putative DxD motif that is suggested to bind to, and activate, a polyprenyl phosphomannose donor and an extracytoplasmic C-terminal domain that is predicted to bind the ramoplanin aglycone acceptor. The ram29 gene was cloned into the tetracycline inducible plasmid pMS17 and integrated into the genome of the enduracidin producer S. fungicidicus. Induction of ram29 expression in S. fungicidicus resulted in the production of monomannosylated enduracidin derivatives, which are not present in the WT strain. Tandem MS analysis showed that mannosylation occurs on the Hpg11 residue of enduracidin. In addition to confirming the function of Ram29, these findings demonstrate how the less common, membrane-associated, polyprenyl phosphosugar-dependent glycosyltransferases can be used in natural product glycodiversification. Such a strategy may be valuable in future biosynthetic engineering approaches aimed at improving the physico-chemical and biological properties of bioactive secondary metabolites including antibiotics.

  8. The Aspergillus fumigatus farnesyltransferase β-subunit, RamA, mediates growth, virulence, and antifungal susceptibility

    Science.gov (United States)

    Norton, Tiffany S.; Al Abdallah, Qusai; Hill, Amy M.; Lovingood, Rachel V.; Fortwendel, Jarrod R.

    2017-01-01

    ABSTRACT Post-translational prenylation mechanisms, including farnesylation and geranylgeranylation, mediate both subcellular localization and protein-protein interaction in eukaryotes. The prenyltransferase complex is an αβ heterodimer in which the essential α-subunit is common to both the farnesyltransferase and the geranylgeranyltransferase type-I enzymes. The β-subunit is unique to each enzyme. Farnesyltransferase activity is an important mediator of protein localization and subsequent signaling for multiple proteins, including Ras GTPases. Here, we examined the importance of protein farnesylation in the opportunistic fungal pathogen Aspergillus fumigatus through generation of a mutant lacking the farnesyltransferase β-subunit, ramA. Although farnesyltransferase activity was found to be non-essential in A. fumigatus, diminished hyphal outgrowth, delayed polarization kinetics, decreased conidial viability, and irregular distribution of nuclei during polarized growth were noted upon ramA deletion (ΔramA). Although predicted to be a target of the farnesyltransferase enzyme complex, we found that localization of the major A. fumigatus Ras GTPase protein, RasA, was only partially regulated by farnesyltransferase activity. Furthermore, the farnesyltransferase-deficient mutant exhibited attenuated virulence in a murine model of invasive aspergillosis, characterized by decreased tissue invasion and development of large, swollen hyphae in vivo. However, loss of ramA also led to a Cyp51A/B-independent increase in resistance to triazole antifungal drugs. Our findings indicate that protein farnesylation underpins multiple cellular processes in A. fumigatus, likely due to the large body of proteins affected by ramA deletion. PMID:28489963

  9. Tyrosine hydroxylase in the ventral tegmental area of rams with high or low libido-A role for dopamine.

    Science.gov (United States)

    Kramer, A C; Mirto, A J; Austin, K J; Roselli, C E; Alexander, B M

    2017-12-01

    Dopamine synthesis in the ventral tegmental area (VTA) is necessary for the reinforcement of sexual behavior. The objective of this study determined if sexual stimuli initiates reward, and whether reward is attenuated in sexually inactive rams. Sexually active rams were exposed to urine from estrous (n=4) or ovariectomized (n=3) ewes with inactive rams (n=3) exposed to urine from estrous ewes. Following exposure, rams were exsanguinated and brains perfused. Alternating sections of the VTA were stained for Fos related antigens (FRA), tyrosine hydroxylase, and dopamine beta-hydroxylase activity. Forebrain tissue, mid-sagittal ventral to the anterior corpus callosum, was stained for dopamine D 2 receptors. Concentrations of cortisol was determined prior to and following exposure. Exposure to ovariectomized-ewe urine in sexually active rams did not influence (P=0.6) FRA expression, but fewer (PSexually inactive rams had fewer (Psexually active rams following exposure to estrous ewe urine. VTA neurons staining positive for dopamine beta-hydroxylase did not differ by sexual activity (P=0.44) or urine exposure (P=0.07). Exposure to stimulus did not influence (P=0.46) numbers of forebrain neurons staining positive for dopamine D2 receptors in sexually active rams, but fewer (P=0.04) neurons stain positive in inactive rams. Serum concentrations of cortisol did not differ (P≥0.52) among rams prior to or following stimulus. In conclusion sexual inactivity is unlikely due to stress, but may be partially a result of decreased tyrosine hydroxylase and/or the response to dopamine. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Prospecting for Wind

    Science.gov (United States)

    Swapp, Andy; Schreuders, Paul; Reeve, Edward

    2011-01-01

    Many people use wind to help meet their needs. Over the years, people have been able to harness or capture the wind in many different ways. More recently, people have seen the rebirth of electricity-generating wind turbines. Thus, the age-old argument about technology being either good or bad can also be applied to the wind. The wind can be a…

  11. Careers in Wind Energy

    Science.gov (United States)

    Liming, Drew; Hamilton, James

    2011-01-01

    As a common form of renewable energy, wind power is generating more than just electricity. It is increasingly generating jobs for workers in many different occupations. Many workers are employed on wind farms: areas where groups of wind turbines produce electricity from wind power. Wind farms are frequently located in the midwestern, western, and…

  12. Comparison of wind pressure measurements on Silsoe ...

    African Journals Online (AJOL)

    user

    efforts have been devoted by various researchers to overcome the problem in turbulence modeling, the wall boundary conditions and the over production of ... additional transport equations are required in 2D and 3D flows respectively, thus requiring additional memory and CPU time due to the increased number of the ...

  13. Short-term effects of the construction of wind turbines on harbour porpoises at Horns Reef

    International Nuclear Information System (INIS)

    Tougaard, J.; Carstensen, Jakob; Damsgaard Henriksen, O.; Teilmann, J.

    2003-04-01

    In 2002 the Worlds largest offshore wind farm, consisting of 80 2MW wind turbines, was constructed on Horns Reef in the Danish North Sea. Ship based visual surveys and long-term deployment of acoustic dataloggers (PODs) were used to assess short term effects of construction on behaviour and abundance of harbour porpoises (Phocoena phocoena). Most focus was put on mounting of steel monopile foundations for the turbines, as they were rammed into the seabed. This type of operation is known to generate very loud underwater sound levels. Combined evidence from animal densities obtained from visual surveys, behavioural observations during surveys and acoustic activity data in and outside the construction area demonstrated effects on the behaviour and abundance of animals on both short-term (hours) and long term (entire construction period) scales. Acoustic activity by the porpoises decreased dramatically on the entire Horns Reef at the onset of ramming operations and returned to higher levels a few hours after each ramming operation was completed. A reduction in abundance close to ramming operations was anticipated, as deterring devices (pingers and seal scarers) were deployed prior to each ramming operation to deter marine mammals from the area and thus protect them from exposure to the loud sound levels generated by the ramming procedure. The changes in abundance and behaviour over large distances are unlikely to be explained by the deterring sounds, which have comparably lower intensities than the ramming sounds and these effects must be attributed to the ramming. A general effect on the behaviour of animals was seen during the construction period and at distances of up to 10-15 kilometers from the construction site. Compared to observations before and after construction there was a decrease in non-directional swimming, a behaviour assumed to correlate with feeding activity. Animal density estimates indicates that there were fewer animals present on the entire Horns

  14. Short-term effects of the construction of wind turbines on harbour porpoises at Horns Reef

    Energy Technology Data Exchange (ETDEWEB)

    Tougaard, J. [Hedeselskabet, Miljoe og Energi A/S, Viborg(Denmark); Carstensen, Jakob [National Environmental Res. Inst., Dept. of Marine Ecology, Roskidle (Denmark); Damsgaard Henriksen, O.; Teilmann, J. [National Environmental Res. Inst., Dept. of Arctic Biology, Roskilde (Denmark)

    2003-04-15

    In 2002 the Worlds largest offshore wind farm, consisting of 80 2MW wind turbines, was constructed on Horns Reef in the Danish North Sea. Ship based visual surveys and long-term deployment of acoustic dataloggers (PODs) were used to assess short term effects of construction on behaviour and abundance of harbour porpoises (Phocoena phocoena). Most focus was put on mounting of steel monopile foundations for the turbines, as they were rammed into the seabed. This type of operation is known to generate very loud underwater sound levels. Combined evidence from animal densities obtained from visual surveys, behavioural observations during surveys and acoustic activity data in and outside the construction area demonstrated effects on the behaviour and abundance of animals on both short-term (hours) and long term (entire construction period) scales. Acoustic activity by the porpoises decreased dramatically on the entire Horns Reef at the onset of ramming operations and returned to higher levels a few hours after each ramming operation was completed. A reduction in abundance close to ramming operations was anticipated, as deterring devices (pingers and seal scarers) were deployed prior to each ramming operation to deter marine mammals from the area and thus protect them from exposure to the loud sound levels generated by the ramming procedure. The changes in abundance and behaviour over large distances are unlikely to be explained by the deterring sounds, which have comparably lower intensities than the ramming sounds and these effects must be attributed to the ramming. A general effect on the behaviour of animals was seen during the construction period and at distances of up to 10-15 kilometers from the construction site. Compared to observations before and after construction there was a decrease in non-directional swimming, a behaviour assumed to correlate with feeding activity. Animal density estimates indicates that there were fewer animals present on the entire Horns

  15. Influence of wind loading

    OpenAIRE

    MAVLONOV RAVSHANBEK ABDUJABBOROVICH; VAKKASOV KHAYRULLO SAYFULLAHANOVICH

    2015-01-01

    Each wind load is determined by a probabilistic-statistical method based on the concept of “equivalent static wind load”, on the assumption that structural frames and components/cladding behave elastically in strong wind.

  16. Tower Winds - Cape Kennedy

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digitized data taken from Wind Gust Charts. Record contains hourly wind directions and speed with a peak wind recorded at the end of each day. Sorted by: station,...

  17. Wind energy program overview

    International Nuclear Information System (INIS)

    1992-02-01

    This overview emphasizes the amount of electric power that could be provided by wind power rather than traditional fossil fuels. New wind power markets, advances in technology, technology transfer, and wind resources are some topics covered in this publication

  18. Modelling Wind for Wind Farm Layout Optimization Using Joint Distribution of Wind Speed and Wind Direction

    OpenAIRE

    Ju Feng; Wen Zhong Shen

    2015-01-01

    Reliable wind modelling is of crucial importance for wind farm development. The common practice of using sector-wise Weibull distributions has been found inappropriate for wind farm layout optimization. In this study, we propose a simple and easily implementable method to construct joint distributions of wind speed and wind direction, which is based on the parameters of sector-wise Weibull distributions and interpolations between direction sectors. It is applied to the wind measurement data a...

  19. Denmark Wind Energy Programme

    DEFF Research Database (Denmark)

    Shen, Wen Zhong

    2014-01-01

    In this paper, a summary of some ongoing wind energy projects in Denmark is given. The research topics comprise computational model development, wind turbine design, low noise airfoil and blade design, control device development, wake modelling, and wind farm layout optimization.......In this paper, a summary of some ongoing wind energy projects in Denmark is given. The research topics comprise computational model development, wind turbine design, low noise airfoil and blade design, control device development, wake modelling, and wind farm layout optimization....

  20. Superconducting Wind Turbine Generators

    OpenAIRE

    Yunying Pan; Danhzen Gu

    2016-01-01

    Wind energy is well known as a renewable energy because its clean and less polluted characteristic, which is the foundation of development modern wind electricity. To find more efficient wind turbine is the focus of scientists around the world. Compared from conventional wind turbines, superconducting wind turbine generators have advantages at zero resistance, smaller size and lighter weight. Superconducting wind turbine will inevitably become the main trends in this area. This paper intends ...

  1. Wind turbines, is it just wind?

    International Nuclear Information System (INIS)

    Boiteux, M.

    2012-01-01

    The author first outlines that wind energy is not only random, but almost absent in extreme situations when it would be needed (for example and notably, very cold weather without wind). He suggests the association of a gas turbine to each wind turbine, so that the gas turbine will replace non operating wind turbines. He notices that wind turbines are not proximity energy as they were said to be, and that profitability in fact requires tens of grouped giant wind turbines. He also outlines the high cost of construction of grids for the connection of these wind turbines. Thus, he states that wind energy is far from being profitable in the present conditions of electricity tariffs in France

  2. Advanced structural wind engineering

    CERN Document Server

    Kareem, Ahsan

    2013-01-01

    This book serves as a textbook for advanced courses as it introduces state-of-the-art information and the latest research results on diverse problems in the structural wind engineering field. The topics include wind climates, design wind speed estimation, bluff body aerodynamics and applications, wind-induced building responses, wind, gust factor approach, wind loads on components and cladding, debris impacts, wind loading codes and standards, computational tools and computational fluid dynamics techniques, habitability to building vibrations, damping in buildings, and suppression of wind-induced vibrations. Graduate students and expert engineers will find the book especially interesting and relevant to their research and work.

  3. Wind for Schools (Poster)

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, I.

    2010-05-01

    As the United States dramatically expands wind energy deployment, the industry is challenged with developing a skilled workforce and addressing public resistance. Wind Powering America's Wind for Schools project addresses these issues by developing Wind Application Centers (WACs) at universities; WAC students assist in implementing school wind turbines and participate in wind courses, by installing small wind turbines at community "host" schools, by implementing teacher training with interactive curricula at each host school. This poster provides an overview of the first two years of the Wind for Schools project, primarily supporting activities in Colorado, Kansas, Nebraska, South Dakota, Montana, and Idaho.

  4. Seasonal prevailing surface winds in Northern Serbia

    Science.gov (United States)

    Tošić, Ivana; Gavrilov, Milivoj B.; Marković, Slobodan B.; Ruman, Albert; Putniković, Suzana

    2018-02-01

    Seasonal prevailing surface winds are analyzed in the territory of Northern Serbia, using observational data from 12 meteorological stations over several decades. In accordance with the general definition of prevailing wind, two special definitions of this term are used. The seasonal wind roses in 16 directions at each station are analyzed. This study shows that the prevailing winds in Northern Serbia have northwestern and southeastern directions. Circulation weather types over Serbia are presented in order to determine the connections between the synoptic circulations and prevailing surface winds. Three controlling pressure centers, i.e., the Mediterranean cyclone, Siberian high, and the Azores anticyclone, appear as the most important large-scale factors that influence the creation of the prevailing winds over Northern Serbia. Beside the synoptic cause of the prevailing winds, it is noted that the orography of the eastern Balkans has a major influence on the winds from the second quadrant. It was found that the frequencies of circulation weather types are in agreement with those of the prevailing winds over Northern Serbia.

  5. Growth performance and hematology of Djallonké rams fed haulms of four varieties of groundnut (Arachis hypogaea L.

    Directory of Open Access Journals (Sweden)

    Terry Ansah

    2017-12-01

    Full Text Available The study was conducted to assess the chemical composition of the haulms of 4 dual-purpose groundnut (Arachis hypogaea L. varieties and their effects on the growth and hematology of Djallonké rams. The groundnut varieties were ICGV 97049 (Obolo, ICGX SM 87057 (Yenyawoso, RMP 12 (Azivivi and Manipinta. Rams (live weight 15.0 ± 3.0 kg were randomly assigned to 4 sole groundnut haulm meal (GHM treatments, with 4 rams each in an individual pen per treatment (total n = 16 rams. Samples of the groundnut haulms were milled and analyzed for crude protein (CP, neutral detergent fiber (NDF and acid detergent fiber (ADF. The CP concentration was higher (P  0.05 when the Djallonké rams were fed the haulms. However, significant differences were observed in final live weight and average daily live weight gain. Rams fed the Yenyawoso variety had higher (P < 0.05 final live weight and average daily live weight gain compared with those fed Obolo and Azivivi varieties. Consumption of any of the 4 varieties of groundnut haulms by Djallonké rams did not have any harmful effect on their red and white blood cell numbers and hemoglobin concentration. The study revealed that the different varieties of groundnut haulms differ in nutrient composition and also affect the growth performance of the rams. The Yenyawoso variety may be used as a sole diet for fattening Djallonké rams.

  6. Guide to Using the WIND Toolkit Validation Code

    Energy Technology Data Exchange (ETDEWEB)

    Lieberman-Cribbin, W.; Draxl, C.; Clifton, A.

    2014-12-01

    In response to the U.S. Department of Energy's goal of using 20% wind energy by 2030, the Wind Integration National Dataset (WIND) Toolkit was created to provide information on wind speed, wind direction, temperature, surface air pressure, and air density on more than 126,000 locations across the United States from 2007 to 2013. The numerical weather prediction model output, gridded at 2-km and at a 5-minute resolution, was further converted to detail the wind power production time series of existing and potential wind facility sites. For users of the dataset it is important that the information presented in the WIND Toolkit is accurate and that errors are known, as then corrective steps can be taken. Therefore, we provide validation code written in R that will be made public to provide users with tools to validate data of their own locations. Validation is based on statistical analyses of wind speed, using error metrics such as bias, root-mean-square error, centered root-mean-square error, mean absolute error, and percent error. Plots of diurnal cycles, annual cycles, wind roses, histograms of wind speed, and quantile-quantile plots are created to visualize how well observational data compares to model data. Ideally, validation will confirm beneficial locations to utilize wind energy and encourage regional wind integration studies using the WIND Toolkit.

  7. Extreme winds over Denmark from the NCEP/NCAR reanalysis

    DEFF Research Database (Denmark)

    Frank, H.P.

    2001-01-01

    An extreme wind analysis of wind speed calculated in the NCEP/NCAR reanalysis is done for grid points over and near Denmark. Winds at 10 m, 850 hPa, and geostrophic winds at 850 hPa, 1000 hPa, and at the sea level are analyzed. At 10 m height the expectedextreme wind with a return period of 50...... at 850 hPa and the geostrophic wind at 850 hPa or 1000 hPa yield very similar extreme winds of approximately 42ms-1. The geostrophic wind calculated from the surface pressure is approximately 45 ms-1 in central Denmark. The geostrophic winds at 1000 hPa are slightly stronger than at 850 hPa, which...... are somewhat greater than the actual wind at 850 hPa.Transformations to a wind at 10 m over a surface with roughness 5 cm with the help of the drag law yield extreme winds, which are approximately 10-12 % less than from surface measurements. The 850 hPa winds and the geostrophic wind calculated from thesurface...

  8. Analysis of strong wind events around Adelie Land, East Antarctica

    Directory of Open Access Journals (Sweden)

    G. Mastrantonio

    2003-06-01

    Full Text Available Strong wind events at Dumont d'Urville (DdU, an East Antarctic coastal station, and Dome C, an interior station, were studied to determine if the wind along the Adelie Land coast increases with the approach of the depression from the west of the site or after its passage to the east of it. The events for the year 1993 were studied using synoptic observations, mean sea level pressure charts and composite infrared satellite images. It was found that the winds are enhanced with the approach of a depression from the west towards the DdU coast. The wind increases in response to the decreasing pressure at the coastal site and increasing downslope pressure difference (dp. The wind starts decreasing once the system moves to the east of DdU and the pressure at DdU starts building up, as reported in some earlier studies. The response of wind to the approaching depression is not the same for all the events but depends on the downslope pressure difference and the movement of the depression that is often conditioned by the presence of a blocking high to the northeast. The wind comes down if the system starts penetrating inland due to the presence of the high pressure ridge to the northeast and decreasing dp. It is observed that the winds at Dome C increase to as high as 17 m s-1 with the inland penetration of the depression.

  9. Structure property relations and finite element analysis of ram horns: A pathway to energy absorbent bio-inspired designs

    Science.gov (United States)

    Trim, Michael Wesley

    2011-12-01

    A recently emerging engineering design approach entails studying the brilliant design solutions found in nature with an aim to develop design strategies that mimic the remarkable efficiency found in biological systems. This novel engineering approach is referred to as bio-inspired design. In this context, the present study quantifies the structure-property relations in bighorn sheep (Ovis canadensis) horn keratin, qualitatively characterizes the effects of a tapered spiral geometry (the same form as in a ram's horn) on pressure wave and impulse mitigation, describes the stress attenuation capabilities and features of a ram's head, and compares the structures and mechanical properties of some energy absorbent natural materials. The results and ideas presented herein can be used in the development of lightweight, energy absorbent, bio-inspired material designs. Among the most notable conclusions garnered from this research include: (1) Horn keratin behaves in an anisotropic manner similar to a long fiber composite. (2) Moisture content dominates the material behavior of horn keratin more than anisotropy, age, and stress-state. This makes moisture content the most influential parameter on the mechanical behavior of horn keratin. (3) Tapered geometries mitigate the impulse generated by a stress wave due to the convergent boundary and a continually decreasing cross sectional area such that greater uniaxial stresses and subsequent axial deformation arises. Furthermore, the tapered geometry introduces small shear stresses that further decrease the impulse. (4) Spiral geometries attenuate the impulse generated by a stress wave by the introduction of shear stresses along the length of the spiral. These shear stresses introduce transverse displacements that function to lessen the impulse. (5) When both a taper and spiral geometry are used in a design, their synergistic effects multiplicatively reduce the impulse (6) Tough natural materials have a high porosity, which makes

  10. Identification of Spanish isolates of Rhizoctonia solani from potato by anastomosis grouping, ITS-RFLP and RAMS-fingerprinting

    Directory of Open Access Journals (Sweden)

    A.M. Elbakali

    2003-08-01

    Full Text Available Anastomosis grouping, restriction fragment length polymorphism (RFLP of the ITS regions including the 5.85 rDNA, and random amplified microsatellites (RAMS were used to characterize isolates of Rhizoctonia solani collected from Spain and Finland. There was a high similarity between the results obtained with the three techniques. RAMS markers revealed more genetic variation among isolates of R. solani than RFLP. The anastomosis group (AG–3 isolates were clearly separated from isolates belonging to other AGs by RAMS, RFLPs and anastomosis grouping. Almost all the isolates sampled from potato belonged to AG–3. No differences were observed between Spanish and Finnish AG–3 isolates.

  11. Doctor Ramón Luis Miranda Torres, su relación con las neurociencias

    OpenAIRE

    Hodelín Tablada,Ricardo

    2005-01-01

    Objetivo: en el presente trabajo se reseña la relación del doctor Ramón Luis Miranda con las neurociencias, dirigido a destacar su inclinación por estas disciplinas. Desarrollo: conocido en la historiografía médica como el médico de José Martí el apóstol cubano el doctor Ramón Luis Miranda Torres, se destacó en otros aspectos poco divulgados, por lo que opinamos que no se le ha otorgado su verdadera dimensión. Nacido en la ciudad de Matanzas, Cuba, estudió medicina en Francia y desde sus años...

  12. An automatic analyzer of solid state nuclear track detectors using an optic RAM as image sensor

    International Nuclear Information System (INIS)

    Staderini, E.M.; Castellano, A.

    1986-01-01

    An optic RAM is a conventional digital random access read/write dynamic memory device featuring a quartz windowed package and memory cells regularly ordered on the chip. Such a device is used as an image sensor because each cell retains data stored in it for a time depending on the intensity of the light incident on the cell itself. The authors have developed a system which uses an optic RAM to acquire and digitize images from electrochemically etched CR39 solid state nuclear track detectors (SSNTD) in the track count rate up to 5000 cm -2 . On the digital image so obtained, a microprocessor, with appropriate software, performs image analysis, filtering, tracks counting and evaluation. (orig.)

  13. Purification of β-acetylglucosaminase and β-galactosidase from ram testis

    Science.gov (United States)

    Caygill, J. C.; Roston, Christine P. J.; Jevons, F. R.

    1966-01-01

    1. The presence of β-galactosidase (EC 3.2.1.23) in an acetic acid extract of ram testis is reported. Some properties of the crude enzyme preparation were studied. 2. The purification of β-acetylglucosaminase (EC 3.2.1.30) and of β-galactosidase from the ram-testis extract by ammonium sulphate precipitation and chromatography on a CM-cellulose column is described. 3. The final purifications of the separated enzymes achieved were for the β-acetylglucosaminase 35 times and for the β-galactosidase 99 times. 4. The possibility of using DEAE-cellulose and Sephadex G-200 to purify the enzymes was investigated. PMID:5949569

  14. THE HYPO-OSMOTIC SWELLING TEST IN FRESH GARUT RAM SPERMATOZOA

    Directory of Open Access Journals (Sweden)

    W.M.M. Nalley

    2014-10-01

    Full Text Available The study was aimed to determine the optimal time to evaluate the maximum numbers of swollensperm after expose to hypo-osmotic solution for testing membrane integrity in fresh garut ram semen. Atotal of 24 ejaculate samples from eight sexually mature garut ram were collected using artificial vagina.After macroscopic evaluation, 10 μL undiluted semen was gently mixed in each of the 2 mL hypoosmoticsolution and incubated at 37oC for 1 hour. Two hundred of coil and non-coiled sperm wereobserved from five different fields every 15 minutes. Results demonstrated that the maximumpercentage of coiling sperm positive to HOS test was at 30 minutes and no differences among 8 garutrams used.

  15. Molecular characterization of 93 genotypes of cocoa (Theobroma cacao L. with random amplified microsatellites RAMs

    Directory of Open Access Journals (Sweden)

    Yacenia Morillo C.

    2014-12-01

    Full Text Available Random amplified microsatellite (RAMs markers six were used to characterize 93 genotypes of cocoa in Tumaco (Colombia. Hundred twenty seven bands were generated. The number of polymorphic loci varied between 11 and 25 for the AG and TG primers, respectively. This study differentiated the 93 genotypes into six groups with a 0.53 similarity, 0.28 mean heterozygosity (He for the population, and 0.12±0.02 genetic differentiation coefficient or Fst. A significant level of genetic diversity was evident in the T. cacao genotypes. This resource would benefit selection programs of individual trees or plant breeding programs. The genotypes clustered in a large proportion in accordance with the collection zone. This characteristic was associated with collection zones and along the rivers in the municipality of Tumaco. The RAM technique proved to be a useful tool for the determination of genetic diversity in Theobroma species.

  16. Wind tunnel tests of tent halls of different shape

    Directory of Open Access Journals (Sweden)

    Porowska Agnieszka

    2017-01-01

    Full Text Available Aerodynamic investigations of wind pressure distribution on the surfaces of models of tent halls were carried out in the boundary layer wind tunnel at the Cracow University of Technology. Four types of objects of different shapes and construction were tested. Although tent halls are significantly vulnerable with respect to the wind action, there is no information about pressure distribution on objects of such type in standards, codes and normalization documents. Obtained results indicate that it is necessary to take into account different configurations of wind action while designing of the analysed structures.

  17. Modelagem das perdas de água por evaporação e arraste em aspersores de média pressão Modeling of evaporation and wind drift losses in medium-pressure sprinklers

    Directory of Open Access Journals (Sweden)

    Samuel Beskow

    2011-03-01

    Full Text Available Neste estudo se avaliou a capacidade preditiva de cinco modelos empíricos visando estimar as perdas de água por evaporação e arraste dos aspersores Agropolo/NY (bocal 3,5 mm e Naan/5024 (bocal 3,0 mm; para cada aspersor foram ajustados modelos específicos. Por meio de comparação entre resultados de distribuição de água medidos em ensaios de campo e resultados simulados com os modelos propostos por Yazar (1984, Trimmer (1987, Seginer et al. (1991, Tarjuelo et al. (2000 e Playán et al. (2005 foi possível concluir que os diferentes modelos considerados apresentaram índices de desempenho classificado como Péssimo ou, no máximo, Sofrível. Comparados com os cinco modelos empíricos considerados, os novos modelos ajustados apresentaram menores erros, qualificando-se para serem utilizados com índices de desempenho classificado como Bom e Muito Bom, indicando que a aplicação de modelos empíricos deve ser limitada ás condições operacionais (diâmetro de bocal, pressão de operação, etc. similares áquelas em que os modelos foram desenvolvidos.Five empirical models were evaluated with respect to their ability to estimate evaporation and wind drift losses of Agropolo/NY (nozzle 3.5 mm and Naan/5024 (nozzle 3.0 mm sprinklers, and other specific models were developed for each sprinkler model. By comparing measured results, which were obtained in field trials, with simulated ones (models of Yazar, 1984; Trimmer, 1987; Seginer et al., 1991; Tarjuelo et al., 2000; and Playán et al., 2005, these models were classified as very bad or poor according to the index of performance. However, the new adjusted models presented lower errors, resulting in indexes of performance classified as good and very good, thus indicating that their application must be limited to operational conditions (nozzle size, operational pressure, etc. similar to those in which they were developed.

  18. Wind resource modelling for micro-siting - Validation at a 60-MW wind farm site

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, J.C.; Gylling Mortensen, N. [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark); Said, U.S. [New and Renewable Energy Authority, Cairo (Egypt)

    1999-03-01

    This paper investigates and validates the applicability of the WAsP-model for layout optimization and micro-siting of wind turbines at a given site for a 60-MW wind farm at Zafarana at the Gulf of Suez in Egypt. Previous investigations show large gradients in the wind climate within the area. For the design and optimization of the wind farm it was found necessary to verify the WAsP extrapolation of wind atlas results from 2 existing meteorological masts located 5 and 10 km, respectively, from the wind farm site. On-site measurements at the 3.5 x 3.5 km{sup 2} wind farm site in combination with 7 years of near-site wind atlas measurements offer significant amounts of data for verification of wind conditions for micro-siting. Wind speeds, wind directions, turbulence intensities and guests in 47.5 m a.g.l. have been measured at 9 locations across the site. Additionally, one of the site masts is equipped as a reference mast, measuring both vertical profiles of wind speed and temperature as well as air pressure and temperature. The exercise is further facilitated by the fact that winds are highly uni-directional; the north direction accounting for 80-90% of the wind resource. The paper presents comparisons of 5 months of on-site measurements and modeled predictions from 2 existing meteorological masts located at distances of 5 and 10 km, respectively, from the wind farm site. Predictions based on terrain descriptions of the Wind Atlas for the Gulf of Suez 1991-95 showed over-predictions of wind speeds of 4-10%. With calibrated terrain descriptions, made based on measured data and a re-visit to critical parts of the terrain, the average prediction error of wind speeds was reduced to about 1%. These deviations are smaller than generally expected for such wind resource modeling, clearly documenting the validity of using WAsP modeling for micro-siting and layout optimization of the wind farm. (au)

  19. A methodology for the prediction of offshore wind energy resources

    Energy Technology Data Exchange (ETDEWEB)

    Watson, S.J.; Watson, G.M. [Rutherford Appleton Lab., Oxfordshire (United Kingdom); Holt, R.J. [Univ. of East Anglia, Climatic Research Unit, Norwich (United Kingdom)] Barthelmie, R.J. [Risoe National Lab., Dept. of Wind Energy and Atmospheric Physics, Roskilde (Denmark); Zuylen, E.J. van [Ecofys Energy and Environment, Utrecht (Netherlands)] Cleijne, J.W. [Kema Sustainable, Arnhem (Netherlands)

    1999-03-01

    There are increasing constraints on the development of wind power on land. Recently, there has been a move to develop wind power offshore, though the amount of measured wind speed data at potential offshore wind farm sites is sparse. We present a novel methodology for the prediction of offshore wind power resources which is being applied to European Union waters. The first stage is to calculate the geostrophic wind from long-term pressure fields over the sea area of interest. Secondly, the geostrophic wind is transformed to the sea level using WA{sup s}P, taking account of near shore topography. Finally, these values are corrected for land/sea climatology (stability) effects using an analytical Coastal discontinuity Model (CDM). These values are further refined using high resolution offshore data at selected sites. The final values are validated against existing offshore datasets. Preliminary results are presented of the geostrophic wind speed validation in European Union waters. (au)

  20. A propósito de José Luis Brea: del archivo a la RAM

    Directory of Open Access Journals (Sweden)

    Fernando Broncano

    2014-06-01

    Full Text Available The philosopher José Luis Brea proposes a notion of memory spread around a network of connections, which reveals a conception of culture based on a RAM structure and contrary to the culture of archive. The underwent changes in the classification of disciplines caused by individual’s attitudes deriving from the new media hyperconnectivity environment will be reviewed here and the relevance in the present humanities of concepts such as exile, frontier and question without answer.

  1. Microprocessor- and LSI-based CAMAC RAM controllers in a modular multiparameter instrumentation system

    International Nuclear Information System (INIS)

    Skarda, V.

    1982-01-01

    This contribution deals with the main features and with the hardware modifications of RAM controllers in the dual-port accessed CAMAC memory modules that have been applied in a modular multichannel analyzer instrumentation system. The modules described in this paper are fully compatible with the CAMAC standard EUR 4100 and with the COMPEX draft proposal of the ESONE Study Group, as well. Special attention is paid to the possible application of modern LSI bipolar circuits. (orig.)

  2. Steady state gamma testing of a 4K NMOS dynamic RAM

    International Nuclear Information System (INIS)

    Coleman, D.W.; Temkin, B.M.

    1976-01-01

    Samples of the Texas Instruments TMS4060JL, 4096 bit dynamic random-access memory (4K RAM) were tested in the ionizing environment of a 137 Ce source. Irradiated in an active condition, the devices were observed to fail at 1 x 10 3 rads (Si). Twenty-four hours after irradiation, 4 of the 5 devices tested were again functional. The devices were not powered and were at room temperature during the 24 hour anneal period

  3. Nano-Ionic Solid State Resistive Memories (Re-RAM): A Review.

    Science.gov (United States)

    Sahoo, Satyajeet; Prabaharan, S R S

    2017-01-01

    Nano-ionic devices based on modest to fast ion conductors as active materials intrigued a revolution in the field of nano solid state resistive memories (the so-called Re-RAM) ever since HP labs unveiled the first solid state memristor device based on titanium dioxide (TiO2). This has brought impetus to the practical implementation of fourth missing element called “Memristor” correlating charge (q) and flux (φ) based on the conceptual thought by Chua in 1971 completing a missing gap between the passive electronic components (R, C and L). It depicts various functional features as memory element in terms of ionic charge transport in solid state by virtue of external electric flux variations. Consequently, a new avenue has been found by manipulating the ionic charge carriers creating a fast switching resistive random access memory (Re-RAM) or the so-called Memristors. The recent research has led to low power, faster switching speed, high endurance and high retention time devices that can be scaled down the order of few nanometers dimension and the 3D stacking is employed that significantly reduces the die area. This review is organized to provide the progress hitherto accomplished in the materials arena to make memristor devices with respect to current research attempts, different stack structures of ReRAM cells using various materials as well as the application of memristive system. Different synthesis approaches to make nano-ionic conducting metal oxides, the fabrication methods for ReRAM cells and its memory performance are reviewed comprehensively.

  4. Rammed earth walls strengthened with polyester fabric strips: Experimental analysis under in-plane cyclic loading

    Czech Academy of Sciences Publication Activity Database

    Miccoli, L.; Müller, U.; Pospíšil, Stanislav

    2017-01-01

    Roč. 149, September (2017), s. 29-36 ISSN 0950-0618 R&D Projects: GA MŠk(CZ) LO1219 Keywords : rammed earth * pseudo-dynamic loads * shear-compression tests * strengthening * polyester fabric strips Subject RIV: JM - Building Engineering OBOR OECD: Construction engineering, Municipal and structural engineering Impact factor: 3.169, year: 2016 http://www.sciencedirect.com/science/article/pii/S0950061817310000

  5. ENCE OF VASECTOMIZED RAMS ON THE III"T{BING PATTERN OF ...

    African Journals Online (AJOL)

    TIM INFLI,'ENCE OF OF VASECTOMIZED SPRINGMATED RAMS CORRIEDALE ON THE EWES. III"T{BING PATTERN OF. B.P. Louw, F.E. Il{arx & G.D. Yates. Reeipt of MS 23.1.74. hllqe of Agriatlture and Reswch Institute, hiwte. W X9059, Pietqmuitzburg. According to Hrm&r (1959, 1962,1964) thc spxual activity of thc erye ...

  6. Characteristics and in Vitro Fertilization Ability of Ram Spermatozoa: Comparison of Epididymal and Ejaculated Spermatozoa

    OpenAIRE

    Pamungkas, F; Setiadi, M A; Karja, N W.K

    2012-01-01

    The characteristics and in vitro fertilization (IVF) ability of ram spermatozoa collected from cauda epididymal was examined. Ejaculated spermatozoa was used as control group in this experiment. Characteristics of spermatozoa including the percentage of progressive motility, viability, abnormality and membrane integrity were evaluated before and after freezing. Fertilization ability of post-thawed spermatozoa in both group was examined based on the pronucleus formation after IVF of in vitro m...

  7. Origin of the OFF state variability in ReRAM cells

    International Nuclear Information System (INIS)

    Salaoru, Iulia; Khiat, Ali; Li, Qingjiang; Prodromakis, Themistoklis; Berdan, Radu; Papavassiliou, Christos

    2014-01-01

    This work exploits the switching dynamics of nanoscale resistive random access memory (ReRAM) cells with particular emphasis on the origin of the observed variability when cells are consecutively cycled/programmed at distinct memory states. It is demonstrated that this variance is a common feature of all ReRAM elements and is ascribed to the formation and rupture of conductive filaments that expand across the active core, independently of the material employed as the active switching core, the causal physical switching mechanism, the switching mode (bipolar/unipolar) or even the unit cells' dimensions. Our hypothesis is supported through both experimental and theoretical studies on TiO 2 and In 2 O 3  : SnO 2 (ITO) based ReRAM cells programmed at three distinct resistive states. Our prototypes employed TiO 2 or ITO active cores over 5 × 5 µm 2 and 100 × 100 µm 2 cell areas, with all tested devices demonstrating both unipolar and bipolar switching modalities. In the case of TiO 2 -based cells, the underlying switching mechanism is based on the non-uniform displacement of ionic species that foster the formation of conductive filaments. On the other hand, the resistive switching observed in the ITO-based devices is considered to be due to a phase change mechanism. The selected experimental parameters allowed us to demonstrate that the observed programming variance is a common feature of all ReRAM devices, proving that its origin is dependent upon randomly oriented local disorders within the active core that have a substantial impact on the overall state variance, particularly for high-resistive states. (paper)

  8. RAM, an RGDS analog, exerts potent anti-melanoma effects in vitro and in vivo.

    Directory of Open Access Journals (Sweden)

    Maria Simona Aguzzi

    Full Text Available Peptides containing the RGD sequence are under continuous investigation given their ability to control cell adhesion and apoptosis. Since small peptides are quickly metabolized and degraded in vivo, developing analogs resistant to serum-induced degradation is a challenging task. RGD analogs developed so far are known as molecules mostly inhibiting cell adhesion; this feature may reduce cell proliferation and tumor development but may not induce regression of tumors or metastases already formed. In the current study, carried out in melanoma in vitro and in vivo models, we show that RAM, an RGD-non-peptide Analog-Molecule, strongly inhibits cells adhesion onto plastic, vitronectin, fibronectin, laminin and von Willebrand Factor while it does not inhibit cell adhesion onto collagen IV, similarly to the RGDS template peptide. It also strongly inhibits in vitro cell proliferation, migration and DNA-synthesis, increases melanoma cells apoptosis and reduces survivin expression. All such effects were observed in collagen IV seeded cells, therefore are most likely independent from the anti adhesive properties. Further, RAM is more stable than the template RGDS; in fact it maintains its anti-proliferation and anti-adhesion effects after long serum exposure while RGDS almost completely loses its effects upon serum exposure. In a mouse metastatic melanoma in vivo model, increasing doses of RAM significantly reduce up to about 80% lung metastases development, while comparable doses of RGDS are less potent. In conclusion these data show that RAM is a potent inhibitor of melanoma growth in vitro, strongly reduces melanoma metastases development in vivo and represents a novel candidate for further in vivo investigations in the cancer treatment field.

  9. Inducing visibilities: an attempt at Santiago Ramón y Cajal's aesthetic epistemology.

    Science.gov (United States)

    Fiorentini, Erna

    2011-12-01

    In this paper, I consider Santiago Ramón y Cajal's strategy of histological observation and imaging in terms of what I call "induction of visibility" (Fiorentini, 2011). Cajal's strategy of visibility induction drew upon both rational and aesthetic visual sensibility, and considered this interplay to be a constitutive element of knowledge production. I propose to describe Cajal's fundamental attitude towards visually inferred knowledge in terms of an "aesthetic epistemology". Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Incentives for use of inelastic analysis in RAM transport container design

    International Nuclear Information System (INIS)

    Ammerman, D.J.; Heinstein, M.W.

    1992-01-01

    The use of inelastic analysis methods instead of the traditional elastic analysis methods in the design of radioactive material (RAM) transport packagings leads to a better understanding of the response ofthe package to mechanical loadings. Thus, better assessment of the containment, thermal protection, and shielding integrity of the package after a structural accident event can be made. A more accurate prediction of the package response can lead to enhanced safety and also allow for a more efficient use of materials, possibly leading to a package with higher capacity and/or lower weight. This paper discusses the incentives for using inelastic analysis in the design of RAM shipping packages. Inelastic analysis provides an improved knowledge of the package behavior. It must be demonstrated that the use of inelastic analysis provides a better design to overcome the difficulties associated with this type of analysis. In this paper, comparisons between elastic and inelastic analyses are made to illustrate the differences in the two analysis techniques for two different types of packages. One is a package to transport a large quantity of RAM by rail with lead gamma shielding,and the other is a package to transport RAM by truck with depleteduranium gamma shielding. Analyses of the center-of-gravity-over-corner impacts will be compared for each package. The comparisons indicate thata package designed to just meet the elastic design criteria will actually undergo some yielding in the locations of highest stress. This results in two consequences in the predicted behavior of the cask. First,the overprediction of the stiffness of these yielded regions by theelastic analysis technique results in an underestimation of the stresses in other portions of the structure. Secondly, in an inelastic analysis, the yielding of a portion of a structure causes the force in thatregion to rise less rapidly than forces in adjacent regions

  11. Is prnt a pseudogene? Identification of ram Prt in testis and ejaculated spermatozoa.

    Directory of Open Access Journals (Sweden)

    Jorge Pimenta

    Full Text Available A hallmark of prion diseases or transmissible spongiform encephalopaties is the conversion of the cellular prion protein (PrP(C, expressed by the prion gene (prnp, into an abnormally folded isoform (PrP(Sc with amyloid-like features that causes scrapie in sheep among other diseases. prnp together with prnd (which encodes a prion-like protein designated as Doppel, and prnt (that encodes the prion protein testis specific--Prt with sprn (shadow of prion protein gene, that encodes Shadoo or Sho genes, constitute the "prion gene complex". Whereas a role for prnd in the proper functioning of male reproductive system has been confirmed, the function of prnt, a recently discovered prion family gene, comprises a conundrum leading to the assumption that ruminant prnt is a pseudogene with no protein expression. The main objective of the present study was to identify Prt localization in the ram reproductive system and simultaneously to elucidate if ovine prnt gene is transcribed into protein-coding RNA. Moreover, as Prt is a prnp-related protein, the amyloid propensity was also tested for ovine and caprine Prt. Recombinant Prt was used to immunize BALB/c mice, and the anti-Prt polyclonal antibody (APPA immune response was evaluated by ELISA and Western Blot. When tested by indirect immunofluorescence, APPA showed high avidity to the ram sperm head apical ridge subdomain, before and after induced capacitation, but did not show the same behavior against goat spermatozoa, suggesting high antibody specificity against ovine-Prt. Prt was also found in the testis when assayed by immunohistochemistry during ram spermatogenesis, where spermatogonia, spermatocytes, spermatids and spermatozoa, stained positive. These observations strongly suggest ovine prnt to be a translated protein-coding gene, pointing to a role for Prt protein in the ram reproductive physiology. Besides, caprine Prt appears to exhibit a higher amyloid propensity than ovine Prt, mostly associated

  12. Is prnt a pseudogene? Identification of ram Prt in testis and ejaculated spermatozoa.

    Science.gov (United States)

    Pimenta, Jorge; Domingos, Ana; Santos, Pedro; Marques, Carla C; Cantante, Cátia; Santos, Ana; Barbas, João P; Baptista, Maria C; Horta, António E M; Viegas, Aldino; Mesquita, Patrícia; Gonçalves, João; Fontes, Carlos A; Prates, José A M; Pereira, Rosa M L N

    2012-01-01

    A hallmark of prion diseases or transmissible spongiform encephalopaties is the conversion of the cellular prion protein (PrP(C)), expressed by the prion gene (prnp), into an abnormally folded isoform (PrP(Sc)) with amyloid-like features that causes scrapie in sheep among other diseases. prnp together with prnd (which encodes a prion-like protein designated as Doppel), and prnt (that encodes the prion protein testis specific--Prt) with sprn (shadow of prion protein gene, that encodes Shadoo or Sho) genes, constitute the "prion gene complex". Whereas a role for prnd in the proper functioning of male reproductive system has been confirmed, the function of prnt, a recently discovered prion family gene, comprises a conundrum leading to the assumption that ruminant prnt is a pseudogene with no protein expression. The main objective of the present study was to identify Prt localization in the ram reproductive system and simultaneously to elucidate if ovine prnt gene is transcribed into protein-coding RNA. Moreover, as Prt is a prnp-related protein, the amyloid propensity was also tested for ovine and caprine Prt. Recombinant Prt was used to immunize BALB/c mice, and the anti-Prt polyclonal antibody (APPA) immune response was evaluated by ELISA and Western Blot. When tested by indirect immunofluorescence, APPA showed high avidity to the ram sperm head apical ridge subdomain, before and after induced capacitation, but did not show the same behavior against goat spermatozoa, suggesting high antibody specificity against ovine-Prt. Prt was also found in the testis when assayed by immunohistochemistry during ram spermatogenesis, where spermatogonia, spermatocytes, spermatids and spermatozoa, stained positive. These observations strongly suggest ovine prnt to be a translated protein-coding gene, pointing to a role for Prt protein in the ram reproductive physiology. Besides, caprine Prt appears to exhibit a higher amyloid propensity than ovine Prt, mostly associated with its

  13. Project and construction of a sequential counter with RAM chips random events

    International Nuclear Information System (INIS)

    Bertini, J.

    1985-01-01

    The project and construction of an electronic system to observe random events, which frequency is registered in successive time intervals with predetermined duration time are presented. The system was developed to study decay of radioactive nuclei with half lives is between 10 -6 s and 10 4 s. The chip MOS RAM - 2114 - 2 which is slow and cheap was used. The register time is twc=200ns. (M.C.K.) [pt

  14. INCAS SUBSONIC WIND TUNNEL

    Directory of Open Access Journals (Sweden)

    Corneliu STOICA

    2009-09-01

    Full Text Available The INCAS Subsonic Wind Tunnel is a closed circuit, continuous, atmospheric pressure facility with a maximum speed of 110 m/s. The test section is octagonal ,of 2.5 m wide, 2.0 m high and 4 m long. The tunnel is powered by a 1200 kW, air cooled variable speed DC motor which drives a 12 blade, 3.5 m diameter fan and is equipped with a six component pyramidal type external mechanical balance with a 700 Kgf maximum lift capacity.The angle of attack range is between -45º and +45º while the yaw angle range is between -140º and +216º .The data acquisition system has been modified recently to allow the recording of all test data on a PC - type computer using LABVIEW and a PXI – type chassis containing specialized data acquisition modules.The tunnel is equipped with a variable frequency electrical supply system for powered models and a 10 bar compressed air supply for pneumatic flow control applications.In the recent years the subsonic wind tunnel has been intensively used for tests within several European projects (AVERT, CESAR and others.

  15. An energy and cost efficient majority-based RAM cell in quantum-dot cellular automata

    Science.gov (United States)

    Khosroshahy, Milad Bagherian; Moaiyeri, Mohammad Hossein; Navi, Keivan; Bagherzadeh, Nader

    Nanotechnologies, notably quantum-dot cellular automata, have achieved major attentions for their prominent features as compared to the conventional CMOS circuitry. Quantum-dot cellular automata, particularly owning to its considerable reduction in size, high switching speed and ultra-low energy consumption, is considered as a potential alternative for the CMOS technology. As the memory unit is one of the most essential components in a digital system, designing a well-optimized QCA random access memory (RAM) cell is an important area of research. In this paper, a new five-input majority gate is presented which is suitable for implementing efficient single-layer QCA circuits. In addition, a new RAM cell with set and reset capabilities is designed based on the proposed majority gate, which has an efficient and low-energy structure. The functionality, performance and energy consumption of the proposed designs are evaluated based on the QCADesigner and QCAPro tools. According to the simulation results, the proposed RAM design leads to on average 38% lower total energy dissipation, 25% smaller area, 20% lower cell count, 28% lower delay and 60% lower QCA cost as compared to its previous counterparts.

  16. Low-power non-volatile spintronic memory: STT-RAM and beyond

    International Nuclear Information System (INIS)

    Wang, K L; Alzate, J G; Khalili Amiri, P

    2013-01-01

    The quest for novel low-dissipation devices is one of the most critical for the future of semiconductor technology and nano-systems. The development of a low-power, universal memory will enable a new paradigm of non-volatile computation. Here we consider STT-RAM as one of the emerging candidates for low-power non-volatile memory. We show different configurations for STT memory and demonstrate strategies to optimize key performance parameters such as switching current and energy. The energy and scaling limits of STT-RAM are discussed, leading us to argue that alternative writing mechanisms may be required to achieve ultralow power dissipation, a necessary condition for direct integration with CMOS at the gate level for non-volatile logic purposes. As an example, we discuss the use of the giant spin Hall effect as a possible alternative to induce magnetization reversal in magnetic tunnel junctions using pure spin currents. Further, we concentrate on magnetoelectric effects, where electric fields are used instead of spin-polarized currents to manipulate the nanomagnets, as another candidate solution to address the challenges of energy efficiency and density. The possibility of an electric-field-controlled magnetoelectric RAM as a promising candidate for ultralow-power non-volatile memory is discussed in the light of experimental data demonstrating voltage-induced switching of the magnetization and reorientation of the magnetic easy axis by electric fields in nanomagnets. (paper)

  17. A graphite based STT-RAM cell with reduction in switching current

    Science.gov (United States)

    Varghani, Ali; Peiravi, Ali

    2015-10-01

    Spin Transfer Torque Random Access Memory (STT-RAM) is a serious candidate for "universal memory" because of its non-volatility, fast access time, high density, good scalability, high endurance and relatively low power dissipation. However, problems with low write speed and large write current are important existing challenges in STT-RAM design and there is a tradeoff between them and data retention time. In this study, a novel STT-RAM cell structure which uses perfect graphite based Magnetic Tunnel Junction (MTJ) is proposed. First, the cross-section of the structure is selected to be an ellipse of 45 nm and 180 nm dimensions and a six-layer graphite is used as tunnel barrier. By passing a lateral current with a short pulse width (before applying STT current and independent of it) through four middle graphene layers of the tunnel barrier, a 27% reduction in the amplitude of the switching current (for fast switching time of 2 ns) or a 58% reduction in its pulse width is achieved without any reduction in data retention time. Finally, the effect of downscaling of technology on the proposed structure is evaluated. A reduction of 31.6% and 9% in switching current is achieved for 90 and 22 nm cell width respectively by passing sufficient current (100 μA with 0.1 ns pulse width) through the tunnel barrier. Simulations are done using Object Oriented Micro Magnetic Framework (OOMMF).

  18. The effect of reactive ion etch (RIE) process conditions on ReRAM device performance

    Science.gov (United States)

    Beckmann, K.; Holt, J.; Olin-Ammentorp, W.; Alamgir, Z.; Van Nostrand, J.; Cady, N. C.

    2017-09-01

    The recent surge of research on resistive random access memory (ReRAM) devices has resulted in a wealth of different materials and fabrication approaches. In this work, we describe the performance implications of utilizing a reactive ion etch (RIE) based process to fabricate HfO2 based ReRAM devices, versus a more unconventional shadow mask fabrication approach. The work is the result of an effort to increase device yield and reduce individual device size. Our results show that choice of RIE etch gas (SF6 versus CF4) is critical for defining the post-etch device profile (cross-section), and for tuning the removal of metal layers used as bottom electrodes in the ReRAM device stack. We have shown that etch conditions leading to a tapered profile for the device stack cause poor electrical performance, likely due to metal re-deposition during etching, and damage to the switching layer. These devices exhibit nonlinear I-V during the low resistive state, but this could be improved to linear behavior once a near-vertical etch profile was achieved. Device stacks with vertical etch profiles also showed an increase in forming voltage, reduced switching variability and increased endurance.

  19. Quality assurance requirements in the testing of packages to be used for safe transportation of RAM

    International Nuclear Information System (INIS)

    Vieru, Gheorghe; Nistor, Viorica; Mihaiu, Ramona

    2010-01-01

    The quality of the Type A, B or C packages used for transport and storage of Radioactive Material (RAM) has to be proved by performing qualification tests in accordance with the Transport Regulations, within the Reliability and Testing Laboratory, Institute for Nuclear Research (INR) Pitesti, where has designed and developed a new Romanian Testing Facility. The qualifications testing are performed under a strict quality assurance programme based on the specific procedures prior approved by the Romanian Nuclear Regulatory Body CNCAN (National Commission for Nuclear Activity Control). This paper describe the quality assurance programme in accordance with the quality management system developed in order to meet the requirements provided by the national regulations as well as to the requirements of the IAEA's safety standard TS-R-1 related to testing of packages to be used for transport of RAM and also provides an overview of the new Romanian Testing Facilities for RAM Packages, developed by the INR's Reliability and Testing Laboratory within an Excellence Scientific Contract. (authors)

  20. Position sensitive regions in a generic radiation sensor based on single event upsets in dynamic RAMs

    International Nuclear Information System (INIS)

    Darambara, D.G.; Spyrou, N.M.

    1997-01-01

    Modern integrated circuits are highly complex systems and, as such, are susceptible to occasional failures. Semiconductor memory devices, particularly dynamic random access memories (dRAMs), are subject to random, transient single event upsets (SEUs) created by energetic ionizing radiation. These radiation-induced soft failures in the stored data of silicon based memory chips provide the foundation for a new, highly efficient, low cost generic radiation sensor. The susceptibility and the detection efficiency of a given dRAM device to SEUs is a complicated function of the circuit design and geometry, the operating conditions and the physics of the charge collection mechanisms involved. Typically, soft error rates measure the cumulative response of all sensitive regions of the memory by broad area chip exposure in ionizing radiation environments. However, this study shows that many regions of a dynamic memory are competing charge collection centres having different upset thresholds. The contribution to soft fails from discrete regions or individual circuit elements of the memory device is unambiguously separated. Hence the use of the dRAM as a position sensitive radiation detector, with high spatial resolution, is assessed and demonstrated. (orig.)

  1. Validation study of the magnetically self-consistent inner magnetosphere model RAM-SCB

    Science.gov (United States)

    Yu, Yiqun; Jordanova, Vania; Zaharia, Sorin; Koller, Josef; Zhang, Jichun; Kistler, Lynn M.

    2012-03-01

    The validation of the magnetically self-consistent inner magnetospheric model RAM-SCB developed at Los Alamos National Laboratory is presented here. The model consists of two codes: a kinetic ring current-atmosphere interaction model (RAM) and a 3-D equilibrium magnetic field code (SCB). The validation is conducted by simulating two magnetic storm events and then comparing the model results against a variety of satellite in situ observations, including the magnetic field from Cluster and Polar spacecraft, ion differential flux from the Cluster/CODIF (Composition and Distribution Function) analyzer, and the ground-based SYM-H index. The model prediction of the magnetic field is in good agreement with observations, which indicates the model's capability of representing well the inner magnetospheric field configuration. This provides confidence for the RAM-SCB model to be utilized for field line and drift shell tracing, which are needed in radiation belt studies. While the SYM-H index, which reflects the total ring current energy content, is generally reasonably reproduced by the model using the Weimer electric field model, the modeled ion differential flux clearly depends on the electric field strength, local time, and magnetic activity level. A self-consistent electric field approach may be needed to improve the model performance in this regard.

  2. Effect of Freezing on Spermatozoa from Tigaie Rams Belonging to the Mountain Ecotype

    Directory of Open Access Journals (Sweden)

    Vasile Miclea

    2011-05-01

    Full Text Available Our aim was to study the influence of freezing on the viability and frequency of abnormalities in frozen ram spermatozoa. Sperm was collected form 20 rams belonging to the mountain ecotype of the Tigaie breed using the artificial vagina technique and volume and motility were assessed. Afterward it was diluted with Tryladil (1:4 supplemented with 20% egg yolk and heated at 37°C. Subsequently the temperature decreased at a rate of 0.2°C/minute until reaching 4°C and an equilibration time of 2 hours followed. During this time the diluted sperm was packaged in 0.25 ml straws. After sealing these were kept 6 cm above liquid nitrogen level for 13 minutes (- 120°C and then plunged into nitrogen. Volume, motility and concentration were assessed before freezing. After thawing sperm morphology was assessed using Hancock’s method and at the same time the endurance (at 10, 30 and 60 minutes and HOST tests were performed. The highest motility (0.40 was graded at 30 minutes. It could be correlated with the increased percentage of HOST positive spermatozoa, 27.78%. The percentage of abnormal spermatozoa was also high (47.89%, 38.44% of them having acrosome flaws. Cryopreservation has a negative effect on the characteristics of sperm cells from Tigaie rams belonging to the mountain ecotype.

  3. Developing Criteria for Lumbar Spine Magnetic Resonance Imaging (MRI) Using RAND Appropriateness Method (RAM)

    International Nuclear Information System (INIS)

    Keshtkaran, Ali; Bagheri, Mohammad Hadi; Ostovar, Rahim; Salari, Hedayat; Farokhi, Majid Reza; Esfandiari, Atefeh; Yousefimanesh, Hossein

    2012-01-01

    Studies show that a large proportion of healthcare offered may be inappropriate or unnecessary. Magnetic resonance imaging (MRI) is a new and expensive diagnostic technology which has been increasingly used all over the world. Moreover, this trend has been more rapidly increasing in Iran. Low back pain is a common disorder all over the world and MRI technique is one of the several ways to assess its cause. The present study aims to develop scenarios for lumbar spine MRI. In the present study, the RAND Appropriateness Method (RAM) was used in order to reach consensus regarding developing scenarios for lumbar spine MRI. We generated scenarios from valid clinical guidelines as well as the experts’ opinion. The panel members included nine specialists from various medical specialties that had scored scenarios in two rounds, the first of which was without interaction, while the second one was with interaction. We extracted 97 scenarios for the lumbar spine MRI in the scenario extracting phase of the study and the panel members added 18 scenarios. After implementation of two rounds, the scenarios were categorized into three ranges. Sixty seven (58%) of the scenarios were considered as appropriate, 45 (39%) as uncertain, and three (2.6%) as inappropriate. RAM is useful for identifying stakeholder views in settings with limited resources. Since RAM has precise instructions for consensus developing, a large number of scenarios were considered as uncertain. Therefore, more research has to be conducted on the issue

  4. Effect of Egg Yolk and Cooling on Storage of Ram Coated Spermatozoa

    Directory of Open Access Journals (Sweden)

    A. Mohammadi-Nohdehy

    2013-08-01

    Full Text Available This study was conducted to evaluate the effect of egg yolk and cooling on ram coated spermatozoa. Semen was collected from three ram by artificial vagina contacted with a tube containing Tris- fructose-egg yolk 15%. Samples were pooled, centrifuged by 700 g for 10 min and removed supernatant. Then, samples were diluted by Tris-glucose and centrifuged again to remove seminal plasma and egg yolk. Aliquots split into two fractions and each one was split into 5 parts and added egg yolk 0, 5, 10, 15 and 20%. The half of the treatments were gradually cold and other ones were encountered with cold shock then samples were incubated at 5C for 72 h. Progressive sperm motility, plasma membrane integrity, viability (by Hoechst 33258 fluorescent staining and acrosome reaction (by PNA-Alexa flur-488 were investigated at 0, 24, 48 and 72 h. The results showed that there was no difference between 15% and 20% egg yolk in the progressive sperm motility but they were higher than 0% and 5% egg yolk. There was highest difference between 0% and 20 % egg yolk in the progressive sperm motility. There was no difference among the treatments containing egg yolk in plasma membrane integrity and acrosome reaction. In both cooling rate, there was no difference among the treatments containing egg yolk in the sperm viability. It was suggested that 20% egg yolk was superior to keep the function of ram coated spermatozoa for storage at 5C.

  5. Wind engineering in Africa

    NARCIS (Netherlands)

    Wisse, J.A.; Stigter, C.J.

    2007-01-01

    The International Association for Wind Engineering (IAWE) has very few contacts in Africa, the second-largest continent. This paper reviews important wind-related African issues. They all require data on wind climate, which are very sparse in Africa. Wind engineering in Africa can assist in

  6. Wind energy; Energie eolienne

    Energy Technology Data Exchange (ETDEWEB)

    Vachey, C.

    2000-05-01

    This public information paper presents the wind energy resource in the Languedoc Roussillon region, explains how a wind turbine works, the different types of utilization and the cost of the wind energy. The environmental impacts of the wind energy, on the noise and the landscape, are also discussed. (A.L.B.)

  7. Extreme winds over Denmark from the NCEP/NCAR reanalysis

    Energy Technology Data Exchange (ETDEWEB)

    Frank, H.P.

    2001-05-01

    An extreme wind analysis of wind speed calculated in the NCEP/NCAR reanalysis is done for grid points over and near Denmark. Winds at 10 m, 850 hPa, and geostrophic winds at 850 hPa, 1000 hPa, and at the sea level are analyzed. At 10 m height the expected extreme wind with a return period of 50 years at the North Sea west of Denmark is 27 ms{sup -1}. It is approximately 11 % less than estimates from observations. However, values at grid points over land in Denmark cannot be compared with observations because the roughness length of these land surfaces is far to big in the model. A transformation to a common roughness length of 5 cm using the geostrophic drag law yields too high values. At points in northern Germany, where the surface roughness of the model is less, the transformed 50-years wind speed is 22-23 ms{sup -1}, which agrees well with estimates obtained from measurements. The analyses of the wind at 850 hPa and the geostrophic wind at 850 hPa or 1000 hPa yield very similar extreme winds of approximately 42 ms{sup -1}. The geostrophic wind calculated from the surface pressure is approximately 45 ms{sup -1} in central Denmark. The geostrophic winds at 1000 hPa are slightly stronger than at 850 hPa, which are somewhat greater than the actual wind at 850 hPa. Transformations to a wind at 10 m over a surface with roughness 5 cm with the help of the drag law yield extreme winds, which are approximately 10-12 % less than from surface measurements. The 850 hPa winds and the geostrophic wind calculated from the surface pressure indicate a weak decrease from west to east, whereas the geostrophic wind data at constant pressure levels show almost constant extreme winds across Denmark. All upper-air and geostrophic wind data show higher extreme winds in northern Germany than in Denmark. Further investigations are necessary to find out if the underestimation of the extreme wind by approximately 10-12 % is valid in most mid-latitudes. (au)

  8. Offshore Wind Farms

    DEFF Research Database (Denmark)

    Lundtang Petersen, Erik; Hasager, Charlotte Bay; Courtney, Michael

    2015-01-01

    The technology behind constructing wind farms offshore began to develop in 1991 when the Vindeby wind farm was installed off the Danish coast (11 Bonus 450 kW turbines). Resource assessment, grid connection, and wind farm operation are significant challenges for offshore wind power just...... concern are the problems associated with locating the turbines close together in a wind farm and the problems of placing several large wind farms in a confined area. The environmental impacts of offshore wind farms are also treated, but not the supply chain, that is, the harbors, the installation vessels...

  9. Un discurso de Ramón y Cajal sobre El Quijote

    Directory of Open Access Journals (Sweden)

    González Quirós, José Luis

    2006-04-01

    Full Text Available The article is a brief study to a lecture by Santiago Ramon y Cajal, entitled Psichology of Don Quixote and Quixotism. It is a rather unknown text, as well as one of the main works regarding the topic produced at the time of the 3rd centennary of Don Quixote. The lecture was commissioned by the Medical College of San Carlos, and was read on May 9th, 1905. The existing editions contain quite a few printing errors. Our analysis sets out Cajal’s ideas regarding the situation of Spanish science and the necessary measures that need to be taken. We also put these ideas in comparison with those of Unamuno and Ortega, the two main Spanish authors to write about the same topic in the same years. We emphasize the agreement between Unamuno and Cajal, as well as the radical difference we can find between Ortega’s and Cajal’s approaches to the subject of science.El artículo es un breve análisis del discurso de Santiago Ramón y Cajal titulado Psicología de Don Quijote y el quijotismo, un texto poco conocido que fue una de las piezas principales producida en torno al tema con motivo del III centenario del Quijote. El discurso de Ramón y Cajal le fue encargado por el Colegio Médico de San Carlos, y se pronunció en Madrid el día 9 de Mayo de 1905. Las ediciones existentes contienen algunas erratas e inexactitudes. Nuestro análisis expone las ideas de Ramón y Cajal en relación con la situación de la ciencia española y con los remedios que es necesario poner en práctica y con el espíritu que debe animarlos para poner luego en relación las ideas de Ramón y Cajal con las de Unamuno y Ortega, los dos principales autores españoles que escribieron sobre el tema en aquellos mismos años, subrayando la coincidencia entre Unamuno y Ramón y Cajal y la llamativa distancia de Ortega con las ideas de nuestro histólogo en relación con la ciencia.

  10. Methodology for assessing the safety of Hydrogen Systems: HyRAM 1.1 technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Groth, Katrina; Hecht, Ethan; Reynolds, John Thomas; Blaylock, Myra L.; Erin E. Carrier

    2017-03-01

    The HyRAM software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM is designed to facilitate the use of state-of-the-art science and engineering models to conduct robust, repeatable assessments of hydrogen safety, hazards, and risk. HyRAM is envisioned as a unifying platform combining validated, analytical models of hydrogen behavior, a stan- dardized, transparent QRA approach, and engineering models and generic data for hydrogen installations. HyRAM is being developed at Sandia National Laboratories for the U. S. De- partment of Energy to increase access to technical data about hydrogen safety and to enable the use of that data to support development and revision of national and international codes and standards. This document provides a description of the methodology and models contained in the HyRAM version 1.1. HyRAM 1.1 includes generic probabilities for hydrogen equipment fail- ures, probabilistic models for the impact of heat flux on humans and structures, and computa- tionally and experimentally validated analytical and first order models of hydrogen release and flame physics. HyRAM 1.1 integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing hydrogen hazards (thermal effects from jet fires, overpressure effects from deflagrations), and assessing impact on people and structures. HyRAM is a prototype software in active development and thus the models and data may change. This report will be updated at appropriate developmental intervals.

  11. Reference intervals for serum reactive oxygen metabolites, biological antioxidant potential, and oxidative stress index in adult rams.

    Science.gov (United States)

    Oikonomidis, Ioannis L; Kiosis, Evangelos A; Brozos, Christos N; Kritsepi-Konstantinou, Maria G

    2017-03-01

    OBJECTIVE To establish reference intervals for serum reactive oxygen metabolites (ROMs), biological antioxidant potential (BAP), and oxidative stress index (OSi) in adult rams by use of controlled preanalytic and analytic procedures. ANIMALS 123 healthy 1- to 4-year-old rams of 2 Greek breeds (Chios [n = 62] and Florina [61]). PROCEDURES 4 hours after rams were fed, a blood sample was obtained from each ram, and serum was harvested. Concentrations of ROMs and BAP were measured colorimetrically on a spectrophotometric analyzer. The OSi was calculated as ROMs concentration divided by BAP concentration. Combined and breed-specific reference intervals were calculated by use of nonparametric and robust methods, respectively. Reference intervals were defined as the 2.5th to 97.5th percentiles. RESULTS Reference intervals for ROMs, BAP, and OSi for all rams combined were 65 to 109 Carratelli units, 2,364 to 4,491 μmol/L, and 18.2 to 43.0 Carratelli units/(mmol/L), respectively. Reference intervals of Chios rams for ROMs, BAP, and OSi were 56 to 113 Carratelli units, 2,234 to 4,290 μmol/L, and 12.9 to 38.4 Carratelli units/(mmol/L), respectively. Reference intervals of Florina rams for ROMs, BAP, and OSi were 68 to 111 Carratelli units, 2,337 to 4,363 μmol/L, and 14.1 to 38.1 Carratelli units/(mmol/L), respectively. CONCLUSIONS AND CLINICAL RELEVANCE Reference intervals calculated in this study can be used as a guide for the interpretation of ROMs, BAP, and OSi results in rams and, under appropriate conditions, can be adopted for use by veterinary laboratories.

  12. Wind power. [electricity generation

    Science.gov (United States)

    Savino, J. M.

    1975-01-01

    A historical background on windmill use, the nature of wind, wind conversion system technology and requirements, the economics of wind power and comparisons with alternative systems, data needs, technology development needs, and an implementation plan for wind energy are presented. Considerable progress took place during the 1950's. Most of the modern windmills feature a wind turbine electricity generator located directly at the top of their rotor towers.

  13. Wind fluctuations over the North Sea

    DEFF Research Database (Denmark)

    Vincent, Claire Louise; Pinson, Pierre; Giebel, Gregor

    2011-01-01

    Climatological patterns in wind speed fluctuations with periods of 1 min to 10 h are analysed using data from a meteorological mast in the Danish North Sea. Fluctuations on these time scales are of particular relevance to the effective management of the power supply from large wind farms. The Hil......Climatological patterns in wind speed fluctuations with periods of 1 min to 10 h are analysed using data from a meteorological mast in the Danish North Sea. Fluctuations on these time scales are of particular relevance to the effective management of the power supply from large wind farms...... a certain class of conditions can be found. Here, the HHT is applied to create conditional spectra which demonstrate patterns in the occurrence of severe wind variability. It is shown that wind fluctuations over the North Sea are more severe for westerly flow than for easterly flow, and that severe...... fluctuations are often observed in the vicinity of precipitation. The most severe wind fluctuations occur in the autumn and winter seasons, and are slightly more common when the pressure tendency is rising. Further, it is found that the wind is more variable for atmospherically unstable conditions than...

  14. Wind Turbines and Human Health

    Science.gov (United States)

    Knopper, Loren D.; Ollson, Christopher A.; McCallum, Lindsay C.; Whitfield Aslund, Melissa L.; Berger, Robert G.; Souweine, Kathleen; McDaniel, Mary

    2014-01-01

    The association between wind turbines and health effects is highly debated. Some argue that reported health effects are related to wind turbine operation [electromagnetic fields (EMF), shadow flicker, audible noise, low-frequency noise, infrasound]. Others suggest that when turbines are sited correctly, effects are more likely attributable to a number of subjective variables that result in an annoyed/stressed state. In this review, we provide a bibliographic-like summary and analysis of the science around this issue specifically in terms of noise (including audible, low-frequency noise, and infrasound), EMF, and shadow flicker. Now there are roughly 60 scientific peer-reviewed articles on this issue. The available scientific evidence suggests that EMF, shadow flicker, low-frequency noise, and infrasound from wind turbines are not likely to affect human health; some studies have found that audible noise from wind turbines can be annoying to some. Annoyance may be associated with some self-reported health effects (e.g., sleep disturbance) especially at sound pressure levels >40 dB(A). Because environmental noise above certain levels is a recognized factor in a number of health issues, siting restrictions have been implemented in many jurisdictions to limit noise exposure. These setbacks should help alleviate annoyance from noise. Subjective variables (attitudes and expectations) are also linked to annoyance and have the potential to facilitate other health complaints via the nocebo effect. Therefore, it is possible that a segment of the population may remain annoyed (or report other health impacts) even when noise limits are enforced. Based on the findings and scientific merit of the available studies, the weight of evidence suggests that when sited properly, wind turbines are not related to adverse health. Stemming from this review, we provide a number of recommended best practices for wind turbine development in the context of human health. PMID:24995266

  15. Wind turbines and human health.

    Science.gov (United States)

    Knopper, Loren D; Ollson, Christopher A; McCallum, Lindsay C; Whitfield Aslund, Melissa L; Berger, Robert G; Souweine, Kathleen; McDaniel, Mary

    2014-01-01

    The association between wind turbines and health effects is highly debated. Some argue that reported health effects are related to wind turbine operation [electromagnetic fields (EMF), shadow flicker, audible noise, low-frequency noise, infrasound]. Others suggest that when turbines are sited correctly, effects are more likely attributable to a number of subjective variables that result in an annoyed/stressed state. In this review, we provide a bibliographic-like summary and analysis of the science around this issue specifically in terms of noise (including audible, low-frequency noise, and infrasound), EMF, and shadow flicker. Now there are roughly 60 scientific peer-reviewed articles on this issue. The available scientific evidence suggests that EMF, shadow flicker, low-frequency noise, and infrasound from wind turbines are not likely to affect human health; some studies have found that audible noise from wind turbines can be annoying to some. Annoyance may be associated with some self-reported health effects (e.g., sleep disturbance) especially at sound pressure levels >40 dB(A). Because environmental noise above certain levels is a recognized factor in a number of health issues, siting restrictions have been implemented in many jurisdictions to limit noise exposure. These setbacks should help alleviate annoyance from noise. Subjective variables (attitudes and expectations) are also linked to annoyance and have the potential to facilitate other health complaints via the nocebo effect. Therefore, it is possible that a segment of the population may remain annoyed (or report other health impacts) even when noise limits are enforced. Based on the findings and scientific merit of the available studies, the weight of evidence suggests that when sited properly, wind turbines are not related to adverse health. Stemming from this review, we provide a number of recommended best practices for wind turbine development in the context of human health.

  16. Three-model ensemble wind prediction in southern Italy

    Directory of Open Access Journals (Sweden)

    R. C. Torcasio

    2016-03-01

    Full Text Available Quality of wind prediction is of great importance since a good wind forecast allows the prediction of available wind power, improving the penetration of renewable energies into the energy market. Here, a 1-year (1 December 2012 to 30 November 2013 three-model ensemble (TME experiment for wind prediction is considered. The models employed, run operationally at National Research Council – Institute of Atmospheric Sciences and Climate (CNR-ISAC, are RAMS (Regional Atmospheric Modelling System, BOLAM (BOlogna Limited Area Model, and MOLOCH (MOdello LOCale in H coordinates. The area considered for the study is southern Italy and the measurements used for the forecast verification are those of the GTS (Global Telecommunication System. Comparison with observations is made every 3 h up to 48 h of forecast lead time. Results show that the three-model ensemble outperforms the forecast of each individual model. The RMSE improvement compared to the best model is between 22 and 30 %, depending on the season. It is also shown that the three-model ensemble outperforms the IFS (Integrated Forecasting System of the ECMWF (European Centre for Medium-Range Weather Forecast for the surface wind forecasts. Notably, the three-model ensemble forecast performs better than each unbiased model, showing the added value of the ensemble technique. Finally, the sensitivity of the three-model ensemble RMSE to the length of the training period is analysed.

  17. Three-model ensemble wind prediction in southern Italy

    Science.gov (United States)

    Torcasio, Rosa Claudia; Federico, Stefano; Calidonna, Claudia Roberta; Avolio, Elenio; Drofa, Oxana; Landi, Tony Christian; Malguzzi, Piero; Buzzi, Andrea; Bonasoni, Paolo

    2016-03-01

    Quality of wind prediction is of great importance since a good wind forecast allows the prediction of available wind power, improving the penetration of renewable energies into the energy market. Here, a 1-year (1 December 2012 to 30 November 2013) three-model ensemble (TME) experiment for wind prediction is considered. The models employed, run operationally at National Research Council - Institute of Atmospheric Sciences and Climate (CNR-ISAC), are RAMS (Regional Atmospheric Modelling System), BOLAM (BOlogna Limited Area Model), and MOLOCH (MOdello LOCale in H coordinates). The area considered for the study is southern Italy and the measurements used for the forecast verification are those of the GTS (Global Telecommunication System). Comparison with observations is made every 3 h up to 48 h of forecast lead time. Results show that the three-model ensemble outperforms the forecast of each individual model. The RMSE improvement compared to the best model is between 22 and 30 %, depending on the season. It is also shown that the three-model ensemble outperforms the IFS (Integrated Forecasting System) of the ECMWF (European Centre for Medium-Range Weather Forecast) for the surface wind forecasts. Notably, the three-model ensemble forecast performs better than each unbiased model, showing the added value of the ensemble technique. Finally, the sensitivity of the three-model ensemble RMSE to the length of the training period is analysed.

  18. The RAM +L analysis methodology: the refinery plants case study; Analise RAM +L: um estudo integrado de varias unidades de producao de uma refinaria

    Energy Technology Data Exchange (ETDEWEB)

    Calixto, Eduardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES); Bretas, Rogerio [PETROBRAS S.A., Betim, MG (Brazil). Refinaria Gabriel Passos (REGAP)

    2008-07-01

    The RAM (Reliability, Availability and Maintainability) main objective is assess the system and equipment performance in order to identify the critical issues to implement system's improvements. The first step is define equipment failure modes and it's PDF as well as repair time for each failure mode. The second step is modeling system regarding diagram block logic dependency among equipment and its failures which cause system production losses. The third step is simulating model in defined period of time in order to identify critical equipment to propose system improvement. Despite being having been used constantly to assess system performances, those methodology do not consider the logistic complex assumptions in so many cases to huge systems and it RDB logic do not represent the real effect in production losses. Even if that good enough to perform system analysis it's not quite enough to complex system with logistic resources regarding system's products efficiency. By the other way round, in logistic complex system analysis methodologies, equipment failures details are not regarded in so many times, showing that there's a necessary improvement in those analysis. Therefore, the RAM + L analysis is a methodology which regards all equipment failures issues as well as logistic assumptions being a more realistic analysis. The refinery case study Will be propose to demonstrate a new vision of two recognized methodologies regarding a complex system with over than 200 equipment comprising two tanks, two pumps and five Unit Plants as Vacuum Distillation, Atmospheric Distillation, Hydrogen Generation, Diesel Hydrotreating Unit and DEA. (author)

  19. Ram Sagar

    Indian Academy of Sciences (India)

    Since January 2016, the Journal of Astrophysics and Astronomy has moved to Continuous Article Publishing (CAP) mode. This means that each accepted article is being published immediately online with DOI and article citation ID with starting page number 1. Articles are also visible in Web of Science immediately.

  20. Ram booster

    Science.gov (United States)

    Brand, Vance D. (Inventor); Morgan, Walter Ray (Inventor)

    2011-01-01

    The present invention is a space launch system and method to propel a payload bearing craft into earth orbit. The invention has two, or preferably, three stages. The upper stage has rocket engines capable of carrying a payload to orbit and provides the capability of releasably attaching to the lower, or preferably, middle stage. Similar to the lower stage, the middle stage is a reusable booster stage that employs all air breathing engines, is recoverable, and can be turned-around in a short time between missions.

  1. Infrasound emission generated by wind turbines

    Science.gov (United States)

    Ceranna, Lars; Pilger, Christoph

    2014-05-01

    Aerodynamic noise emissions from the continuously growing number of wind turbines in Germany are creating increasing problems for infrasound recording systems. Such systems are equipped with highly sensitive micro pressure sensors, which are accurately measuring acoustic signals in a frequency range inaudible to humans. At infrasound station IGADE, north of Bremen, a constantly increasing background noise has been observed throughout the years since its installation in 2005. The spectral peaks are reflecting well the blade passing harmonics, which vary with prevailing wind speeds. Overall, a decrease is noted for the infrasound array's detection capability. This aspect is particularly important for the other two sites of the German infrasound stations I26DE in the Bavarian Forest and I27DE in Antarctica, because plans for installing wind turbines near these locations are being under discussion. These stations are part of the International Monitoring System (IMS) verifying compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT), and have to meet stringent specifications with respect to infrasonic background noise. Therefore data obtained during a field experiment with mobile micro-barometer stations for measuring the infrasonic pressure level of a single horizontal-axis wind turbine have been revisited. The results of this experiment successfully validate a theoretical model which estimates the generated sound pressure level of wind turbines and makes it possible to specify the minimum allowable distance between wind turbines and infrasound stations for undisturbed recording. Since the theoretical model also takes wind turbine design parameters into account, suitable locations for planned infrasound stations outside the determined disturbance range can be found, which will be presented; and vice versa, the model calculations' results for fixing the minimum distance for wind turbines planned for installation in the vicinity of an existing infrasound array.

  2. Wind Regimes in Complex Terrain of the Great Valley of Eastern Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Birdwell, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2011-05-01

    This research was designed to provide an understanding of physical wind mechanisms within the complex terrain of the Great Valley of Eastern Tennessee to assess the impacts of regional air flow with regard to synoptic and mesoscale weather changes, wind direction shifts, and air quality. Meteorological data from 2008 2009 were analyzed from 13 meteorological sites along with associated upper level data. Up to 15 ancillary sites were used for reference. Two-step complete linkage and K-means cluster analyses, synoptic weather studies, and ambient meteorological comparisons were performed to generate hourly wind classifications. These wind regimes revealed seasonal variations of underlying physical wind mechanisms (forced channeled, vertically coupled, pressure-driven, and thermally-driven winds). Synoptic and ambient meteorological analysis (mixing depth, pressure gradient, pressure gradient ratio, atmospheric and surface stability) suggested up to 93% accuracy for the clustered results. Probabilistic prediction schemes of wind flow and wind class change were developed through characterization of flow change data and wind class succession. Data analysis revealed that wind flow in the Great Valley was dominated by forced channeled winds (45 67%) and vertically coupled flow (22 38%). Down-valley pressure-driven and thermally-driven winds also played significant roles (0 17% and 2 20%, respectively), usually accompanied by convergent wind patterns (15 20%) and large wind direction shifts, especially in the Central/Upper Great Valley. The behavior of most wind regimes was associated with detectable pressure differences between the Lower and Upper Great Valley. Mixing depth and synoptic pressure gradients were significant contributors to wind pattern behavior. Up to 15 wind classes and 10 sub-classes were identified in the Central Great Valley with 67 joined classes for the Great Valley at-large. Two-thirds of Great Valley at-large flow was defined by 12 classes. Winds

  3. Application of Satellite-Derived Ocean Surface Winds to the Detection of Weather Systems and the Prediction of Near-Ocean Surface Winds around Hawaii

    Directory of Open Access Journals (Sweden)

    Hsi-Chyi Yeh

    2010-01-01

    Full Text Available The Hawaiian Island chain is surrounded by the open ocean and is an ideal place to conduct the application of QuikSCAT satellite-derived ocean surface winds to the detection of weather systems. With the help of QuikSCAT winds, the associated circulation of the weather systems over the open ocean around Hawaii can be identified. In this study, the obvious cyclonic circulation associated with a Kona storm, the significant wind shift and wind confluence related to the surface cold front, and the anticyclonic circulation related to high-pressure systems for both a strong-wind event and a trade-wind condition are revealed over the open ocean through QuikSCAT winds. The propagation of a cold frontal boundary, defined by the wind shift and wind confluence, also can be clearly detected using the reanalyzed ocean-surface winds.

  4. Climatic wind tunnel for wind engineering tasks

    Czech Academy of Sciences Publication Activity Database

    Kuznetsov, Sergeii; Pospíšil, Stanislav; Král, Radomil

    2015-01-01

    Roč. 112, 2-B (2015), s. 303-316 ISSN 1897-628X R&D Projects: GA ČR(CZ) GA14-12892S Keywords : climatic tunnel * wind tunnel * atmospheric boundary layer * flow resistance * wind tunnel contraction Subject RIV: JM - Building Engineering https://suw.biblos.pk.edu.pl/resources/i5/i6/i6/i7/i6/r56676/KuznetsovS_ClimaticWind.pdf

  5. Wind Atlas for Egypt

    DEFF Research Database (Denmark)

    Mortensen, Niels Gylling; Said Said, Usama; Badger, Jake

    2006-01-01

    The results of a comprehensive, 8-year wind resource assessment programme in Egypt are presented. The objective has been to provide reliable and accurate wind atlas data sets for evaluating the potential wind power output from large electricityproducing wind turbine installations. The regional wind...... climates of Egypt have been determined by two independent methods: a traditional wind atlas based on observations from more than 30 stations all over Egypt, and a numerical wind atlas based on long-term reanalysis data and a mesoscale model (KAMM). The mean absolute error comparing the two methods is about...... 10% for two large-scale KAMM domains covering all of Egypt, and typically about 5% for several smaller-scale regional domains. The numerical wind atlas covers all of Egypt, whereas the meteorological stations are concentrated in six regions. The Wind Atlas for Egypt represents a significant step...

  6. Wind Atlas for Egypt

    DEFF Research Database (Denmark)

    The results of a comprehensive, 8-year wind resource assessment programme in Egypt are presented. The objective has been to provide reliable and accurate wind atlas data sets for evaluating the potential wind power output from large electricityproducing wind turbine installations. The regional wind...... climates of Egypt have been determined by two independent methods: a traditional wind atlas based on observations from more than 30 stations all over Egypt, and a numerical wind atlas based on long-term reanalysis data and a mesoscale model (KAMM). The mean absolute error comparing the two methods is about...... 10% for two large-scale KAMM domains covering all of Egypt, and typically about 5% for several smaller-scale regional domains. The numerical wind atlas covers all of Egypt, whereas the meteorological stations are concentrated in six regions. The Wind Atlas for Egypt represents a significant step...

  7. Extreme wind estimate for Hornsea wind farm

    DEFF Research Database (Denmark)

    Larsén, Xiaoli Guo

    The purpose of this study is to provide estimation of the 50-year winds of 10 min and 1-s gust value at hub height of 100 m, as well as the design parameter shear exponent for the Hornsea offshore wind farm. The turbulence intensity required for estimating the gust value is estimated using two ap....... The greatest sector-wise extreme winds are from west to northwest. Different data, different periods and different methods have provided a range of values of the 50-year wind and accordingly the gust values, as summarized in Table 15.......The purpose of this study is to provide estimation of the 50-year winds of 10 min and 1-s gust value at hub height of 100 m, as well as the design parameter shear exponent for the Hornsea offshore wind farm. The turbulence intensity required for estimating the gust value is estimated using two...... approaches. One is through the measurements from the wind Doppler lidar, WindCube, which implies serious uncertainty, and the other one is through similarity theory for the atmospheric surface layer where the hub height is likely to belong to during strong storms. The turbulence intensity for storm wind...

  8. Simulating the seismic pressure noise on Mars

    Science.gov (United States)

    Murdoch, N.; Kenda, B.; Kawamura, T.; Spiga, A.; Lognonné, P.; Mimoun, D.; Banerdt, W. B.

    2017-09-01

    The atmospheric pressure fluctuations on Mars will induce an elastic response in the ground that will create a ground tilt, detectable as a seismic signal on SEIS. We use Large Eddy Simulations of the wind and surface pressure at the InSight landing site, combined with ground deformation models to investigate the atmospheric pressure signals on SEIS.

  9. Offshore wind energy developments

    DEFF Research Database (Denmark)

    Stolpe, Mathias; Buhl, Thomas; Sumer, B. Mutlu

    2014-01-01

    This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services.......This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services....

  10. Wind energy information guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This book is divided into nine chapters. Chapters 1--8 provide background and annotated references on wind energy research, development, and commercialization. Chapter 9 lists additional sources of printed information and relevant organizations. Four indices provide alphabetical access to authors, organizations, computer models and design tools, and subjects. A list of abbreviations and acronyms is also included. Chapter topics include: introduction; economics of using wind energy; wind energy resources; wind turbine design, development, and testing; applications; environmental issues of wind power; institutional issues; and wind energy systems development.

  11. Wind Power Career Chat

    Energy Technology Data Exchange (ETDEWEB)

    2011-01-01

    This document will teach students about careers in the wind energy industry. Wind energy, both land-based and offshore, is expected to provide thousands of new jobs in the next several decades. Wind energy companies are growing rapidly to meet America's demand for clean, renewable, and domestic energy. These companies need skilled professionals. Wind power careers will require educated people from a variety of areas. Trained and qualified workers manufacture, construct, operate, and manage wind energy facilities. The nation will also need skilled researchers, scientists, and engineers to plan and develop the next generation of wind energy technologies.

  12. Arctic wind energy

    International Nuclear Information System (INIS)

    Peltola, E.; Holttinen, H.; Marjaniemi, M.; Tammelin, B.

    1998-01-01

    Arctic wind energy research was aimed at adapting existing wind technologies to suit the arctic climatic conditions in Lapland. Project research work included meteorological measurements, instrument development, development of a blade heating system for wind turbines, load measurements and modelling of ice induced loads on wind turbines, together with the development of operation and maintenance practices in arctic conditions. As a result the basis now exists for technically feasible and economically viable wind energy production in Lapland. New and marketable products, such as blade heating systems for wind turbines and meteorological sensors for arctic conditions, with substantial export potential, have also been developed. (orig.)

  13. Arctic wind energy

    Energy Technology Data Exchange (ETDEWEB)

    Peltola, E. [Kemijoki Oy (Finland); Holttinen, H.; Marjaniemi, M. [VTT Energy, Espoo (Finland); Tammelin, B. [Finnish Meteorological Institute, Helsinki (Finland)

    1998-12-31

    Arctic wind energy research was aimed at adapting existing wind technologies to suit the arctic climatic conditions in Lapland. Project research work included meteorological measurements, instrument development, development of a blade heating system for wind turbines, load measurements and modelling of ice induced loads on wind turbines, together with the development of operation and maintenance practices in arctic conditions. As a result the basis now exists for technically feasible and economically viable wind energy production in Lapland. New and marketable products, such as blade heating systems for wind turbines and meteorological sensors for arctic conditions, with substantial export potential, have also been developed. (orig.)

  14. Wind power today

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This publication highlights initiatives of the US DOE`s Wind Energy Program. 1997 yearly activities are also very briefly summarized. The first article describes a 6-megawatt wind power plant installed in Vermont. Another article summarizes technical advances in wind turbine technology, and describes next-generation utility and small wind turbines in the planning stages. A village power project in Alaska using three 50-kilowatt turbines is described. Very brief summaries of the Federal Wind Energy Program and the National Wind Technology Center are also included in the publication.

  15. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  16. Effects of dithioerythritol on ram semen after the freeze-thawing process.

    Science.gov (United States)

    Başpınar, Nuri; Coyan, Kenan; Bucak, Mustafa Numan; Tuncer, Pürhan Barbaros

    2011-12-01

    The aim of this study was to evaluate the effects of dithioerythritol added to cryopreservation extender on the post-thawed sperm parameters, lipid peroxidation and antioxidant activities of Merino ram sperm. Semen samples from 5 mature Merino rams (1 and 2 years of age) were used in the study. Semen samples, which were diluted with a Tris-based extender containing 0.5, 1, and 2mM dithiothreitol and no antioxidant (control), were cooled to 5°C and frozen in 0.25 ml French straws. Frozen straws were then thawed individually at 37°C for 20s in a water bath for evaluation. The addition of dithioerythritol at 0.5 and 2mM doses led to higher percentages of subjective motility (62.9±4.2% and 63.6±1.8%) compared to control (52.0±4.9%, Pcontrol (44.2±8.7%, Pcontrol (15.0±2.5%). Dithioerythritol at 1 and 2 mM doses for ALH provided higher values compared to the control (Pprocess. Supplementation with dithiothreitol did not significantly affect the integrities of sperm membrane and acrosome, and mitochondrial activities. No significant differences were observed in biochemical parameters among the groups (P>0.05). Findings of this study showed that dithioerythritol supplementation in semen extenders, was of greater benefit to sperm motility of frozen-thawed ram sperm. Copyright © 2011 Elsevier Inc. All rights reserved.

  17. The quality of Garut ram liquid semen in Tris egg yolk extender to the sucrose supplementation

    Directory of Open Access Journals (Sweden)

    Yulnawati

    2016-01-01

    Full Text Available The successful program of artificial insemination in sheep is determined by the quality of sperm that are used. Therefore, it is important to maintain the quality of sperm during and after storage in low temperature. The research was conducted to study the influence of sucrose in the Tris-yolk extender in maintaining the quality of Garut ram sperm during preservation in reaction tube for four days at 5°C. Ejaculated sperm was collected once a week for five weeks using artificial vagina from same ram. Semen was divided into four groups of extenders, i.e. Tris egg yolk 20% (TKT, TKT + 0,1% sucrose, TKT + 0,3% sucrose and TKT + 0,5% w/v sucrose. The results showed that the percentage of motility on day four (D-4 of storage in TKT (41.00 ± 2.0% was lower (P0.05 from TKT + 0.1% (45.00 ± 3.16%. Whereas the percentage of live cells (%H on D-4 in TKT, TKT + 0.1%, TKT + 0.3% and TKT + 0.5% were 55.00 ± 2.19%; 57.20 ± 2.79%; 59.20 ± 3.25% and 61.20 ± 3.60%, respectively. Meanwhile, the percentage of membrane integrity (MPU in TKT (51.80 ± 1.94% was significantly different (P0.05 from TKT + 0.1% (54.80 ± 2.86%. In conclusion, the addition of sucrose 0.3% w/v into TKT extender could maintain the quality of Garut ram sperm more efficiently and better than TKT extender.

  18. Modeling, simulation, and evaluation of HE ammunition for counter-RAM systems

    Science.gov (United States)

    Graswald, Markus; Rothe, Hendrik

    2008-04-01

    Military camps in out-of-area missions are permanently threatened by rockets, artillery projectiles, and mortar grenades (RAM) launched by terrorists. A good portion of these attacks are undertaken by mortars due to their specific advantages for the warfare of irregular forces and their worldwide distribution. The military installations can be protected by counter-RAM systems consisting of several artillery weapons, radar and electro-optical sensors, C2 and fire control computers. A system analysis has shown that the precision of the sensors is vital for defending the camp with low ammunition consumptions. Furthermore, the type of ammunition is also of great impact: 35 mm Ahead ammunition is hardly suited for this application due to its small hit density and low kinetic energy of the sub-projectiles, especially in the case of mortar grenades. Therefore, 155 mm high-explosive (HE) ammunition is investigated using experimentally determined fragment data. Russian mortar projectiles are considered as worst-case RAM targets and their ballistics are mathematically modeled by an air drag function that is also used for computing firing tables. Due to uncertainties of the target positions that are given by an elliptic cylinder for specific sensor parameters, simulations are conducted in order to determine the ammunition consumption. Penetration and detonation criteria for the terminal impact are also considered and the resulting thresholds are displayed in a 3D fragment map. The results show that HE ammunition is superior to low-caliber ammunition because of their high numbers of effective fragments reducing the number of rounds significantly from hundreds to less than ten.

  19. The ram effect: New insights into neural modulation of the gonadotropic axis by male odors and socio-sexual interactions.

    Directory of Open Access Journals (Sweden)

    CLAUDE eFABRE NYS

    2015-04-01

    Full Text Available Reproduction in mammals is controlled by the hypothalamo-pituitary-gonadal (HPG axis under the influence of external and internal factors such as photoperiod, stress, nutrition, and social interactions. Sheep are seasonal breeders and stop mating when day length is increasing (anestrus. However, interactions with a sexually active ram during this period can override the steroid negative feedback responsible for the anoestrus state, stimulate LH secretion and eventually reinstate cyclicity. This is known as the ram effect and research into the mechanisms underlying it is shedding new light on HPG axis regulation. The first step in the ram effect is increased LH pulsatile secretion in anestrus ewes exposed to a sexually active male or only to its fleece, the latter finding indicating a pheromone-like effect. Estradiol secretion increases in all ewes and this eventually induces a LH surge and ovulation, just as during the breeding season. An exception is a minority of ewes that exhibit a precocious LH surge (within 4h with no prior increase in estradiol. The main olfactory system and the cortical nucleus of the amygdala are critical brain structures in mediating the ram effect since it is blocked by their inactivation. Sexual experience is also important since activation (increased c-fos expression in these and other regions is greatly reduced in sexually naïve ewes. In adult ewes kisspeptin neurons in both arcuate and preoptic regions and some preoptic GnRH neurons are activated 2h after exposure to a ram. Exposure to rams also activates noradrenergic neurons in the locus coeruleus and A1 nucleus and increased noradrenalin release occurs in the posterior preoptic area. Pharmacological modulation of this system modifies LH secretion in response to the male or his odor. Together these results show that the ram effect can be a fruitful model to promote both a better understanding of the neural and hormonal regulation of the HPG axis in general and

  20. Loss of protein kinase 2 subunit alpha 2 (CK2α') effect ram sperm function after freezing and thawing process.

    Science.gov (United States)

    He, Yuxuan; Li, Hongyan; Wang, Ke; Zhang, Yong; Zhao, Xingxu

    2017-06-01

    Protein kinase 2 subunit alpha 2 (CK2α'), a serine/threonine-selective protein kinase, is associated with sperm apoptosis. However, the presence of CK2α' in ram sperm during the freezing-thawing process has not been previously reported. Thus, this study was conducted to determine the effect of cryopreservation on the association between CK2α' and ram sperm function. Sperm variables, including sperm motility, DNA damage and acrosome integrity, were measured in fresh (F), cooled (CO) and freeze-thawed (FT) sperm. Sperm proteins and total mRNA were extracted form cells of each group, and subjected to western blot and real-time PCR analysis for detection of CK2α' proteins and relative abundance of mRNA. The distribution pattern of CK2α' protein in ram sperm was also monitored in each group using an immunofluorescence technique. The results provided evidence that the freeze-thaw process has an impact on ram sperm variables, and the normalized CK2α' protein and relative abundance of CK2α' mRNA were both significantly less in FT than F sperm. The amount of CK2α' in FT extended seminal plasma was increased as compared with F samples. Furthermore, immunofluorescence revealed that CK2α' was distributed throughout the acrosome of ram sperm. The association of CK2α' with DNA damage and acrosome integrity was confirmed using Pearson's linear correlation. In conclusion, the understanding the molecular effects of cryopreservation on CK2α' in ram sperm could provide insight into methods for improving fertility associated with frozen-thawed ram sperm. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Kinematics of ram filter feeding and beat-glide swimming in the northern anchovyEngraulis mordax.

    Science.gov (United States)

    Carey, Nicholas; Goldbogen, Jeremy A

    2017-08-01

    In the dense aquatic environment, the most adept swimmers are streamlined to reduce drag and increase the efficiency of locomotion. However, because they open their mouth to wide gape angles to deploy their filtering apparatus, ram filter feeders apparently switch between diametrically opposite swimming modes: highly efficient, streamlined 'beat-glide' swimming, and ram filter feeding, which has been hypothesized to be a high-cost feeding mode because of presumed increased drag. Ram filter-feeding forage fish are thought to play an important role in the flux of nutrients and energy in upwelling ecosystems; however, the biomechanics and energetics of this feeding mechanism remain poorly understood. We quantified the kinematics of an iconic forage fish, the northern anchovy, Engraulis mordax , during ram filter feeding and non-feeding, mouth-closed beat-glide swimming. Although many kinematic parameters between the two swimming modes were similar, we found that swimming speeds and tailbeat frequencies were significantly lower during ram feeding. Rather than maintain speed with the school, a speed which closely matches theoretical optimum filter-feeding speeds was consistently observed. Beat-glide swimming was characterized by high variability in all kinematic parameters, but variance in kinematic parameters was much lower during ram filter feeding. Under this mode, body kinematics are substantially modified, and E. mordax swims more slowly and with decreased lateral movement along the entire body, but most noticeably in the anterior. Our results suggest that hydrodynamic effects that come with deployment of the filtering anatomy may limit behavioral options during foraging and result in slower swimming speeds during ram filtration. © 2017. Published by The Company of Biologists Ltd.

  2. Measuring tropospheric wind with microwave sounders

    Science.gov (United States)

    Lambrigtsen, B.; Su, H.; Turk, J.; Hristova-Veleva, S. M.; Dang, V. T.

    2017-12-01

    In its 2007 "Decadal Survey" of earth science missions for NASA the U.S. National Research Council recommended that a Doppler wind lidar be developed for a three-dimensional tropospheric winds mission ("3D-Winds"). The technology required for such a mission has not yet been developed, and it is expected that the next Decadal Survey, planned to be released by the end of 2017, will put additional emphasis on the still pressing need for wind measurements from space. The first Decadal Survey also called for a geostationary microwave sounder (GMS) on a Precipitation and All-weather Temperature and Humidity (PATH) mission, which could be used to measure wind from space. Such a sounder, the Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR), has been developed at the Jet Propulsion Laboratory (JPL). The PATH mission has not yet been funded by NASA, but a low-cost subset of PATH, GeoStorm has been proposed as a hosted payload on a commercial communications satellite. Both PATH and GeoStorm would obtain frequent (every 15 minutes of better) measurements of tropospheric water vapor profiles, and they can be used to derive atmospheric motion vector (AMV) wind profiles, even in the presence of clouds. Measurement of wind is particularly important in the tropics, where the atmosphere is largely not in thermal balance and wind estimates cannot generally be derived from temperature and pressure fields. We report on simulation studies of AMV wind vectors derived from a GMS and from a cluster of low-earth-orbiting (LEO) small satellites (e.g., CubeSats). The results of two separate simulation studies are very encouraging and show that a ±2 m/s wind speed precision is attainable, which would satisfy WMO requirements. A GMS observing system in particular, which can be implemented now, would enable significant progress in the study of atmospheric dynamics. Copyright 2017 California Institute of Technology. Government sponsorship acknowledged

  3. Test CMOS/SOS RAM for transient radiation upset comparative research and failure analysis

    International Nuclear Information System (INIS)

    Nikiforov, A.Y.; Poljakov, I.V.

    1995-01-01

    The test Complementary Metal-Oxide-Semiconductor/Silicon-on-Sapphire Random Access Memory (CMOS/SOS RAM) with eight types of memory cells was designed and tested at high dose rates with a flash X-ray machine and laser simulator. The memory cell (MC) design with additional transistors and RC-chain was found to be upset free up to 2 x 10 12 rad(Si)/s. An inversion effect was discovered in which almost 100% logic upset was observed in poorly protected memory cell arrays at very high dose rates

  4. [Dr. Ramón Pérez Cirera: Importance of his trajectory in Mexican pharmacology].

    Science.gov (United States)

    López-Vega, Diana Laura; Martínez-Barbosa, Xóchitl

    2016-01-01

    Dr. Ramón Pérez Cirera (1936-1982) arrived in Mexico from Spain in 1936. Since then, his links with compatriots abroad and their acquired preparation in Europe allows to contribute to Mexican Pharmacology. He participated in teaching and research; he formalized, presided and helped to structure the Department of Pharmacology of the Faculty of Medicine from the National Autonomous University of Mexico and promoted the training of specialized associations. He led the Section of Pharmacology in the National Academy of Medicine. Understanding the value of his contribution helps to visualize the growth and maturation of national Pharmacology.

  5. Experimental investigation of the flow near the ram element in the brush turbine

    Directory of Open Access Journals (Sweden)

    Schmirler M.

    2015-01-01

    Full Text Available The paper focuses on the investigating of the parameters of the fluid flow around the brush turbine ram element. The flow field was evaluated qualitatively by observing changes in density using a Schlieren method. It was also evaluated the influence of the element geometry on the total aerodynamic force of the element. The aerodynamic force was measured directly using a special aerodynamic balance. The aim of the project was to find the simplest element geometry with a maximum force effect and achieve an increase in overall efficiency and reduce the manufacturing costs.

  6. The TN-RAM - a new cask for shipping high activity irradiated hardware

    International Nuclear Information System (INIS)

    Neider, T.; Hanson, A.S.

    1993-01-01

    Transnuclear, Inc. has developed a Type B(U) radioactive material transport packaging designed specifically for the transport of dry, irradiated, non-fuel bearing components (NFBC). The TN-RAM is a transport cask in the configuration of a right circular cylinder, fabricated from lead and stainless steel, with wood-filled impact limiters attached at both ends. The lead and stainless steel construction of the lid, walls, and bottom provides a shielding effectiveness of approximately 7.1 inches (18 cm) lead equivalent. (J.P.N.)

  7. Mentira y Verdad en tres Novelas de Sergio Ramírez: Algunos Procedimientos de Verosimilitud

    OpenAIRE

    Rodríguez Sancho, Javier

    2013-01-01

    Con base en la narrativa del nicaragüense Sergio Ramírez, se efectúa un análisis sobre algunos procedimientos de verosimilitud utilizados por el escritor en tres de sus novelas: Tiempo de fulgor (1970); ¿Te dio miedo la sangre? (1977) y Un baile de máscaras (1995). La evaluación de los textos busca comprender los niveles en que el escritor hace uso de ciertos procedimientos de verosimilitud para contarnos algunas mentiras verdaderas como él mismo lo ha llamado, en su ensayo: Mentiras verdader...

  8. Regeneration of plants from leaves of Chrysanthemum morifolium Ram. cv. Bronze Bornholm in in vitro cultures

    Directory of Open Access Journals (Sweden)

    Aurelia Ślusarkiewicz-Jarzina

    2014-01-01

    Full Text Available Plants were obtained from cultured in vitro leaves of Chrysanthemum morifolium Ram. cv. Bronze Bornholm. The leaves were inoculated on Murashige and Skoog medium (MS supplemented with cytokinins (kinetin - KIN, zeatin - ZEA, 6-benzyloaminopurine - BAP and auxins (2,4-dichlorophenoxyacetic acid - 2,4-D, α-naphtaleneacetic acid - NAA, 3-indolilacetic acid - IAA, p-fluorophenylalanine - PFA in various combinations and concentra-tions. The most suitable medium was that one which contained 4 mg/l KIN, 2 mg/l NAA and 50 mg/l PFA.

  9. Trehalose enhances osmotic tolerance and suppresses lysophosphatidylcholine-induced acrosome reaction in ram spermatozoon.

    Science.gov (United States)

    Ahmad, E; Naseer, Z; Aksoy, M; Küçük, N; Uçan, U; Serin, I; Ceylan, A

    2015-09-01

    This study was aimed to investigate the influence of trehalose on osmotic tolerance and the ability of ram spermatozoon to undergo acrosome reaction induced by lysophosphatidylcholine (LPC). In experiment 1, the diluted ejaculates were exposed to anisosmotic fructose solutions (70, 500, 750 and 1000 mOsm l(-1) ) with or without 50 mm trehalose. The presence of trehalose in hyperosmotic conditions enhanced (P spermatozoon was less (P spermatozoon and suppresses their ability to undergo LPC and cryo-induced acrosome reaction. © 2014 Blackwell Verlag GmbH.

  10. The Literary Criticism and Memoirs of Juan Ramón Jiménez

    Directory of Open Access Journals (Sweden)

    Allen W. Phillips

    1983-01-01

    Full Text Available Equally as demanding of others as he was of himself, Juan Ramón Jiménez conceived of literary criticism as a serious and exacting task. The critic and the poet, standing side by side, are devoted to complementary activities of mutual enrichment. However fragmentary and partial the critical opinions of Juan Ramón may be (also outspoken and polemical in nature, they are invaluable as a personal historical and aesthetic guide to about fifty or sixty years of Hispanic literary development (1900-1960. Not to take them into account is to fail to recognize a highly important aspect of his total artistic personality. These varied critical texts are a product of a first rate intelligence and the sensibility of a writer of consummate discrimination who was endowed not only with an excellent memory but also a very special talent for appreciating the authentic. Juan Ramón as a critic is quick to praise (San Juan, Bécquer, Dario, Unamuno and Machado and at the same time strong in his censure of certain contemporaries. Several recently collected volumes of miscellaneous critical materials have resolved the bibliographical muddle for the initial study of this fundamental aspect of the poet, but still particularly important are the expressionistic portraits of Españoles de tres mundos , longer tributes to Valle, Ortega and Villaespesa as well as the extensive lectures delivered in his latter years. Examination of these pages gives us an historical and creative overview of the period in which he lived and worked in addition to original considerations about the evolution of Hispanic poetry. Of course, one of the constant focal points of his literary criticism was the modernist epoch of his early days, a movement or attitude which he considered to be a modern twentieth century renaissance. Together with detailed study of these two areas of historical and aesthetic nature, in the ensuing pages some conclusions are pointed out as to the essence of poetry

  11. Evaluation of Slaughtered lambs Results from Varamini Ewes Crossing with Shal, Afshar, Moghani and Varamini Rams

    Directory of Open Access Journals (Sweden)

    reza seyedsharifi

    2016-08-01

    Full Text Available Introduction One of the animal breeding aims is increasing the economic efficiency. Therefore, mating among selected animals in order to enhance economic efficiency should also supply variation in population for next generations’ selection. This study was performed to estimate performance in cross breed lambs resulting from crosses of shal, moghani, afshari and varamini rams with varamini ewes, compained it to pure varamini lambs. Materials and Methods The objective of this study was the progeny evaluation from slaughter in one way crossing between Varamini ewes with Shal, Afshari, Moghani and Varamini rams and comparing their progeny efficiency. Thus, three 1.5 and 3 years rams were selected from each of Shal, Afshari, Moghani and Varamini breeds. A sample was separated from 10, 11 and 12 ribs was separated for examination of the fat, meat and bone percentage in different breed group lambs carcass. Data statistical analyze was done by GLM procedure of SAS 9.1 software. Results and Discussion Afshari crossbreed lambs had better carcass performance rather than the other breed groups although before slaughtering live weight of Shal and Moghani lambs were higher. Male lambs had better live weight and carcass quality before slaughtering than female lambs. The analyze of carcass parts percentage indicated that crossbreed lambs from Afshari rams with Varamini ewes had the highest efficiency and lowest rump percentage between genetic groups about valuable parts total percentage of thigh, roast, wristband and low price flank steak, brisket and neck. The analyze results of carcass tissue proportions combination showed Shal, Moghani and Afshar crossbreeds had more meat percentage and lower fat percentage on numbers 10, 11 and 12 of ribs than Varamini net breed. Conclusion According to our findings about cross surface and length from carcass the highest amount of them was belong to Shal and Afshari breeds, although difference amount between breeds was

  12. Serum testosterone level and affecting factors in Syrian Awassi ram lambs

    International Nuclear Information System (INIS)

    Zarkawi, M.

    2004-01-01

    Results showed that testosterone exists in the blood of ram lams as early as the first month of age with no significant difference between single and twin births. This level, however, increased gradually with advancing age of ram lambs, indicating that the gonads (testes) of these growing lambs were active in secreting testosterone hormone after birth, but the rate of secretion differed with age of the lambs. A sharp increase in testosterone level was recorded at age of 8 months in twin births (5.32 ± 20.99 nmol/l) and in single births (7.26 ± 3.29 nmol/l). Throughout the study period, mean testosterone serum level was 3.29 ± 2.73 and 2.54 ± 2.15 nmol/l for single and twin births, respectively, as compared with an overall mean of 3.00 ± 2.49 nmol/l. However, the monthly difference in testosterone level between single and twin births was not significant (P>0.05) throughout the study period (10 months). Results also indicated an increase in live weight of lambs with advancing age, and live weight in single births was higher, but not significantly, than in twin births throughout the study period. Results of the study showed a sharp increase in the mean live weight of single births at age of 8 months (48.5 ± 10.8 kg) as compared with an overall live weight of the lambs (35.8 ± 15.2 and 32.7 ± 15.4 kg for single and twin births, respectively). A positive and significant correlation (r= 0.95, P>0.0001) was found between serum testosterone level and lamb live weight during the first 10 months of their age. Finally and for the first time, normal serum testosterone levels in Syrian Awassi ram lambs were determined during early stages. It was concluded, based on both, testosterone level and lamb live weight, that puberty in Awassi ram lambs could be reached at 8 months of age with a mean live weight of around 47 kg. Type of birth, lamb birth weight or weaning weight had no significant effect on testosterone level. (author)

  13. Santiago Ramón y Cajal and three-dimensional cinema.

    Science.gov (United States)

    Santarén, Juan Fernández

    2015-01-01

    In this article, I present and comment on two unpublished letters written by the Spanish engineer Carlos Mendizábal Brunet to Santiago Ramón y Cajal informing him of the development of a new device for three-dimensional cinema and asking for his approval. Fortunately, the answers given by Cajal to these two letters have also been preserved, and they reveal his interest in three-dimensional cinema; in the letters, he reported that he himself had designed a prototype capable of creating on a screen a feeling of 3-D relief, a subject about which he was always passionate.

  14. A Novel Nondestructive Bit-Line Discharging Scheme for Deep Submicrometer STT-RAM

    DEFF Research Database (Denmark)

    Zeinali, Behzad; Madsen, Jens Kargaard; Raghavan, Praveen

    A combination of semiconductor integrated circuits (IC) and a dense array of scaled magnetic tunnel junctions (MTJ) makes promising Spin-Transfer Torque Random Access Memory (STT-RAM). This emerging memory minimizes the leakage power consumption and provides a high density at scaled technologies......, the sensing scheme is accomplished in one step. In this scheme, the Bit-Line is pre-charged and then discharged during read operation. The MTJ resistance state can be found by comparing the time constant of discharging. The simulation results show the overall sensing time is 4 ns when the Bit-Line capacitance...

  15. SeaRAM: A DOE evaluation of maritime accident risk assessment data and methods

    International Nuclear Information System (INIS)

    Sprung, J.L.; Ammerman, D.J.; Koski, J.A.

    1998-03-01

    The SeaRAM Program conducted for the US Department of Energy by Sandia National Laboratories has developed estimates of the frequencies of occurrence of ship fires and ship collisions, the fraction of all ship fires and ship collisions that might be sufficiently severe to challenge the integrity of a Type B spent fuel transportation cask, the magnitude of the radioactive source terms that might be released from a Type B spent fuel transportation cask due to loss of cask integrity, and the magnitude of the radiological consequences that might be caused by the radioactive release

  16. Development and realization of the new state system of account and control of RAM and RAW

    International Nuclear Information System (INIS)

    Gubanov, V.; Shilko, V.; Syssoev, M.; Ershov, V.; Yanovskaya, N.

    1998-01-01

    In the article the principles of organization, organizational structure and main functions of the automated system of the state account and control of radioactive material (RAM) and waste (RAW), which is developed now in Russia, are presented. On the base of analysis the existing ( >) system the acute necessity in automation of processes of an account and control DA and DAI, based on use of modern information technologies is shown. There are presented a structure and content of normative - legal, program and information parts of the system and milestones of designing it. (author)

  17. Effect of selenium supplementation on performance, cost economics, and biochemical profile of Nellore ram lambs.

    Science.gov (United States)

    Sushma, K; Reddy, Y Ramana; Kumari, N Nalini; Reddy, P Baswa; Raghunandan, T; Sridhar, K

    2015-09-01

    Present experiment was conducted to investigate the effect of selenium (Se) supplementation on performance, carcass characteristics, meat composition, shelflife of meat and biochemical profile in Nellore ram lambs. 24 male Nellore ram lambs (15.75±0.47 kg) were randomly divided into four dietary groups with six lambs in each and reared under uniform management conditions for 120 days. Basal diet was not supplemented with Se and consisted of green fodder (Se 0.09 mg/kg dry matter [DM]), dry roughage (Se 0.11 mg/kg DM) and concentrate mixture (Se 0.019 mg/kg DM) and fed individually. Dietary treatments were prepared by adding graded levels Se (0, 0.45, 0.9, and 1.8 ppm) to concentrate mixture (1% body weight [BW]) from sodium selenite. Feed offered and refusal measured daily; and BWs were measured at fortnight interval to find out average daily gain (g), feed conversion ratio (FCR), cost economics and plane of nutrition. Serum biochemical profile (concentration of glucose, total protein, albumin, globulin, cholesterol, and hemoglobin) was assessed on 0, 60(th), and 120(th) day. At the end of experiment, the carcass characteristics (dressing percentage, cut-up parts, meat to bone ratio) and meat chemical composition were evaluated. Meat keeping (thiobarbituric acid reactive substances) quality from different groups was evaluated on day 0, 3, and 6 post-slaughter. Dietary Se supplementation did not show any effect on weight gain, FCR, cost economics, plane of nutrition, and serum biochemical profile in Nellore ram lambs. However, Se supplemented lambs had numerically higher weight gain than the unsupplemented lambs. Similarly, carcass characteristics and keeping quality were comparable among the four treatments. However, numerical increase in post-slaughter keeping quality with increasing Se supplementation was observed. It can be concluded that supplementation of Se in the form of sodium selenite (inorganic source) at different levels did not influence animal

  18. Turbulence Simulation of Laboratory Wind-Wave Interaction in High Winds and Upscaling to Ocean Conditions

    Science.gov (United States)

    2016-12-22

    mean wind profile, and a minor reduction in the form drag fraction. This supports recent theoretical perspectives that propose very differing... turnover times. For the results, wind and pressure fields are made dimensionless by (u*, u* 2 ) and all lengths are made dimensionless by  where... turnover times (~ 50) owing to the reduction in the timestep on the fine grid. We found the fine mesh runs were similar in character to the coarse mesh

  19. Estimation of wind speed and wave height during cyclones

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Mandal, S.; AshokKumar, K.

    based on standard Hydromet pressure profile, were used for the hindcast of storm wind fields. For all the cyclones the maximum significant wave height within the storm and its associated spectral peak period was estimated using the Young's model...

  20. Solar wind stream interfaces

    International Nuclear Information System (INIS)

    Gosling, J.T.; Asbridge, J.R.; Bame, S.J.; Feldman, W.C.

    1978-01-01

    Measurements aboard Imp 6, 7, and 8 reveal that approximately one third of all high-speed solar wind streams observed at 1 AU contain a sharp boundary (of thickness less than approx.4 x 10 4 km) near their leading edge, called a stream interface, which separates plasma of distinctly different properties and origins. Identified as discontinuities across which the density drops abruptly, the proton temperature increases abruptly, and the speed rises, stream interfaces are remarkably similar in character from one stream to the next. A superposed epoch analysis of plasma data has been performed for 23 discontinuous stream interfaces observed during the interval March 1971 through August 1974. Among the results of this analysis are the following: (1) a stream interface separates what was originally thick (i.e., dense) slow gas from what was originally thin (i.e., rare) fast gas; (2) the interface is the site of a discontinuous shear in the solar wind flow in a frame of reference corotating with the sun; (3) stream interfaces occur at speeds less than 450 km s - 1 and close to or at the maximum of the pressure ridge at the leading edges of high-speed streams; (4) a discontinuous rise by approx.40% in electron temperature occurs at the interface; and (5) discontinuous changes (usually rises) in alpha particle abundance and flow speed relative to the protons occur at the interface. Stream interfaces do not generally recur on successive solar rotations, even though the streams in which they are embedded often do. At distances beyond several astronomical units, stream interfaces should be bounded by forward-reverse shock pairs; three of four reverse shocks observed at 1 AU during 1971--1974 were preceded within approx.1 day by stream interfaces. Our observations suggest that many streams close to the sun are bounded on all sides by large radial velocity shears separating rapidly expanding plasma from more slowly expanding plasma

  1. Evolution of wind towards wind turbine

    NARCIS (Netherlands)

    Giyanani, A.H.; Bierbooms, W.A.A.M.; Van Bussel, G.J.W.

    2015-01-01

    Remote sensing of the atmospheric variables with the use of LiDAR is a relatively new technology field for wind resource assessment in wind energy. The validation of LiDAR measurements and comparisons is of high importance for further applications of the data.

  2. Tidal analysis of Met rocket wind data

    Science.gov (United States)

    Bedinger, J. F.; Constantinides, E.

    1976-01-01

    A method of analyzing Met Rocket wind data is described. Modern tidal theory and specialized analytical techniques were used to resolve specific tidal modes and prevailing components in observed wind data. A representation of the wind which is continuous in both space and time was formulated. Such a representation allows direct comparison with theory, allows the derivation of other quantities such as temperature and pressure which in turn may be compared with observed values, and allows the formation of a wind model which extends over a broader range of space and time. Significant diurnal tidal modes with wavelengths of 10 and 7 km were present in the data and were resolved by the analytical technique.

  3. Automated Boundary Conditions for Wind Tunnel Simulations

    Science.gov (United States)

    Carlson, Jan-Renee

    2018-01-01

    Computational fluid dynamic (CFD) simulations of models tested in wind tunnels require a high level of fidelity and accuracy particularly for the purposes of CFD validation efforts. Considerable effort is required to ensure the proper characterization of both the physical geometry of the wind tunnel and recreating the correct flow conditions inside the wind tunnel. The typical trial-and-error effort used for determining the boundary condition values for a particular tunnel configuration are time and computer resource intensive. This paper describes a method for calculating and updating the back pressure boundary condition in wind tunnel simulations by using a proportional-integral-derivative controller. The controller methodology and equations are discussed, and simulations using the controller to set a tunnel Mach number in the NASA Langley 14- by 22-Foot Subsonic Tunnel are demonstrated.

  4. Wind energy harvesting with a piezoelectric harvester

    International Nuclear Information System (INIS)

    Wu, Nan; Wang, Quan; Xie, Xiangdong

    2013-01-01

    An energy harvester comprising a cantilever attached to piezoelectric patches and a proof mass is developed for wind energy harvesting, from a cross wind-induced vibration of the cantilever, by the electromechanical coupling effect of piezoelectric materials. The vibration of the cantilever under the cross wind is induced by the air pressure owing to a vortex shedding phenomenon that occurs on the leeward side of the cantilever. To describe the energy harvesting process, a theoretical model considering the cross wind-induced vibration on the piezoelectric coupled cantilever energy harvester is developed, to calculate the charge and the voltage from the harvester. The influences of the length and location of the piezoelectric patches as well as the proof mass on the generated electric power are investigated. Results show that the total generated electric power can be as high as 2 W when the resonant frequency of the cantilever harvester is close to the vortex shedding frequency. Moreover, a value of total generated electric power up to 1.02 W can be practically realized for a cross wind with a variable wind velocity of 9–10 m s −1 by a harvester with a length of 1.2 m. This research facilitates an effective and compact wind energy harvesting device. (paper)

  5. Wind Tunnel Measurements at LM Wind Power

    DEFF Research Database (Denmark)

    Bertagnolio, Franck

    2012-01-01

    The optimization of airfoil profiles specifically designed for wind turbine application was initiated in the late 80’s [67, 68, 30, 15]. The first attempts to reduce airfoil noise for wind turbines made use of airfoil trailing edge serration. Themodification of airfoil shapes targeted at noise...... reduction is more recent. An important effort was produced in this direction within the SIROCCO project. This latter work involved measurements on full size wind turbines and showed that trailing edge serration may proved a viable solution for mitigating wind turbine noise though it has not been implemented...... on commercial wind turbine yet. It should be mentioned here that the attenuation of turbulent inflow noise using wavy leading edge has recently been investigated [55], but this technique has still to be further validated for practical applications. In this paper, it is proposed to optimize an airfoil which...

  6. Genetic variability of Harton del Valle by RAM Variabilidad genética de Hartón del Valle mediante RAM

    Directory of Open Access Journals (Sweden)

    Alvarez Franco Luz Angela

    2008-03-01

    Full Text Available Harton del Valle (HV breed belong to the seven Creole breeds of the Colombian bovine livestock, according to FAO criteria it is considered as vulnerable. To study its genetical variability, 33 HV animals and three and 3 animals of Holstein breed as a external control were sampled. Simples of DNA were isolated using the Salting Out method and RAM (Random amplified microsatellites technique was used. CGA, CCA, TG and CT primers were used. The mean value of expected heterocigozity was 0.26 and FST fue 0.39 ± 0.03. Using Dice–Nei Li index and UPGMA clustering method, two groups were distinguished: the first one integrated for two conservation herds and other one by tour faros that have been sharing breeding bulls.El Hartón del Valle (HV hace parte de las siete razas criollas de ganado bovino colombiano y de acuerdo con los criterios de la FAO está considerado como vulnerable. Para estudiar su variabilidad genética fueron muestreados 33 individuos HV y tres animales de la raza Holstein, como control externo. Se extrajo ADN utilizando el método de Salting Out y las muestras fueron analizadas mediante la técnica molecular RAM (Randon amplified microsatellites. Se utilizaron los cebadores CGA, CCA, TG, y CT. El valor promedio de heterocigosidad esperada fue de 0.26 y el FST fue 0.39 ± 0.03. Con el índice de Dice–Nei Li y agrupando con el método UPGMA se distinguieron dos grupos: uno integrado por dos hatos de conservación y el otro por cuatro fincas que han compartido reproductores.

  7. An evaluation of the WindEye wind lidar

    DEFF Research Database (Denmark)

    Dellwik, Ebba; Sjöholm, Mikael; Mann, Jakob

    Prevision of the wind field by remote sensing wind lidars has the potential to improve the performance of wind turbines. The functionality of a WindEye lidar developed by Windar Photonics A/S (Denmark) for the wind energy market was tested in a two months long field experiment. The WindEye sensor...... with a high accuracy during the whole campaign....

  8. Wind electric power generation

    International Nuclear Information System (INIS)

    Koch, M.K.; Wind, L.; Canter, B.; Moeller, T.

    2001-01-01

    The monthly statistics of wind electric power generation in Denmark are compiled from information given by the owners of the private wind turbines. For each wind turbine the name of the site and of the type of turbine is given, and the power generation data are given for the month in question together with the total production in 1999 and 2000. Also the data of operation start are given. On the map of Denmark the sites of the wind turbines are marked. (CLS)

  9. The Irish Wind Atlas

    Energy Technology Data Exchange (ETDEWEB)

    Watson, R. [Univ. College Dublin, Dept. of Electronic and Electrical Engineering, Dublin (Ireland); Landberg, L. [Risoe National Lab., Meteorology and Wind Energy Dept., Roskilde (Denmark)

    1999-03-01

    The development work on the Irish Wind Atlas is nearing completion. The Irish Wind Atlas is an updated improved version of the Irish section of the European Wind Atlas. A map of the irish wind resource based on a WA{sup s}P analysis of the measured data and station description of 27 measuring stations is presented. The results of previously presented WA{sup s}P/KAMM runs show good agreement with these results. (au)

  10. Turbulence and wind turbines

    DEFF Research Database (Denmark)

    Brand, Arno J.; Peinke, Joachim; Mann, Jakob

    2011-01-01

    The nature of turbulent flow towards, near and behind a wind turbine, the effect of turbulence on the electricity production and the mechanical loading of individual and clustered wind turbines, and some future issues are discussed.......The nature of turbulent flow towards, near and behind a wind turbine, the effect of turbulence on the electricity production and the mechanical loading of individual and clustered wind turbines, and some future issues are discussed....

  11. Seasonal variations of melatonin in ram seminal plasma are correlated to those of testosterone and antioxidant enzymes

    Directory of Open Access Journals (Sweden)

    Muiño-Blanco Teresa

    2010-06-01

    Full Text Available Abstract Background Some breeds of sheep are highly seasonal in terms of reproductive capability, and these changes are regulated by photoperiod and melatonin secretion. These changes affect the reproductive performance of rams, impairing semen quality and modifying hormonal profiles. Also, the antioxidant defence systems seem to be modulated by melatonin secretion, and shows seasonal variations. The aim of this study was to investigate the presence of melatonin and testosterone in ram seminal plasma and their variations between the breeding and non-breeding seasons. In addition, we analyzed the possible correlations between these hormones and the antioxidant enzyme defence system activity. Methods Seminal plasma from nine Rasa Aragonesa rams were collected for one year, and their levels of melatonin, testosterone, superoxide dismutase (SOD, glutathione reductase (GRD, glutathione peroxidase (GPX and catalase (CAT were measured. Results All samples presented measurable quantities of hormones and antioxidant enzymes. Both hormones showed monthly variations, with a decrease after the winter solstice and a rise after the summer solstice that reached the maximum levels in October-November, and a marked seasonal variation (P Conclusions These results show the presence of melatonin and testosterone in ram seminal plasma, and that both hormones have seasonal variations, and support the idea that seasonal variations of fertility in the ram involve interplay between melatonin and the antioxidant defence system.

  12. Behavioural and seminal characteristics of Santa Ines rams subjected to successive semen collections in the Amazonian region

    Directory of Open Access Journals (Sweden)

    Luiz Fernando S. Rodrigues

    2012-10-01

    Full Text Available The objective of this study was to evaluate the reproductive performance of Santa Ines rams subjected to successive semen collections in an Amazonian climate. Four rams were subjected to successive ejaculations during a maximum period of three hours. This procedure was repeated three times at 15-day intervals. Sexual and behavioural (libido and andrological (testicular and seminal assessments were performed. A total of 81 ejaculates were collected. Libido and semen vigour, volume, appearance and concentration decreased as the ejaculation frequency increased (P<0.05 and sperm motility showed a decreasing trend (P=0.06. The seminal pH increased over the sequence of collections (P<0.05. The only significant differences observed between individual rams were the variable scrotal circumference and the percentages of live sperm and sperm abnormalities (P<0.05. All the parameters of the first ejaculation were within the normal range for this species, which suggests that the local climatic conditions (high temperature and humidity did not affect the behavioural, testicular or seminal parameters of experimental rams. Our findings indicate that the reproductive performance of Santa Ines rams could be affected by the intensification of ejaculation frequency; however, individual male variation needs to be taken into consideration.

  13. Wind Power Now!

    Science.gov (United States)

    Inglis, David Rittenhouse

    1975-01-01

    The government promotes and heavily subsidizes research in nuclear power plants. Federal development of wind power is slow in comparison even though much research with large wind-electric machines has already been conducted. Unless wind power programs are accelerated it will not become a major energy alternative to nuclear power. (MR)

  14. Power from the Wind

    Science.gov (United States)

    Roman, Harry T.

    2004-01-01

    Wind energy is the fastest-growing renewable energy source in the world. Over the last 20 years, the wind industry has done a very good job of engineering machines, improving materials, and economies of production, and making this energy source a reality. Like all renewable energy forms, wind energy's successful application is site specific. Also,…

  15. Extreme winds in Denmark

    DEFF Research Database (Denmark)

    Kristensen, L.; Rathmann, O.; Hansen, S.O.

    1999-01-01

    Wind-speed data from four sites in Denmark have been analyzed in order to obtain estimates of the basic wind velocity, defined as the 50-year wind speed (ten minute averages) under standard conditions, i.e. 10 meter over a homogeneous terrain with the roughness length 0.05 m. The sites are Skjern...

  16. Extreme winds in Denmark

    DEFF Research Database (Denmark)

    Kristensen, L.; Rathmann, Ole; Hansen, S.O.

    1999-01-01

    Wind-speed data from four sites in Denmark have been analyzed in order to obtain estimates of the basic wind velocity which is defined as the 50-year wind speed under standard conditions, i.e. ten-minute averages at the height 10 m over a uniform terrainwith the roughness length 0.05 m. The sites...

  17. Modelling Wind for Wind Farm Layout Optimization Using Joint Distribution of Wind Speed and Wind Direction

    DEFF Research Database (Denmark)

    Feng, Ju; Shen, Wen Zhong

    2015-01-01

    Reliable wind modelling is of crucial importance for wind farm development. The common practice of using sector-wise Weibull distributions has been found inappropriate for wind farm layout optimization. In this study, we propose a simple and easily implementable method to construct joint distribu......Reliable wind modelling is of crucial importance for wind farm development. The common practice of using sector-wise Weibull distributions has been found inappropriate for wind farm layout optimization. In this study, we propose a simple and easily implementable method to construct joint...... quite well in terms of the coefficient of determination R-2. Then, the best of these joint distributions is used in the layout optimization of the Horns Rev 1 wind farm and the choice of bin sizes for wind speed and wind direction is also investigated. It is found that the choice of bin size for wind...... direction is especially critical for layout optimization and the recommended choice of bin sizes for wind speed and wind direction is finally presented....

  18. Wind and Yaw correlation

    DEFF Research Database (Denmark)

    Federici, Paolo; Kock, Carsten Weber

    The report describes measurements carried out on a given turbine and period. The measurements are carried out in accordance to Ref. [1]. A comparison between wind speed and wind direction on the met mast and nacelle wind speed and yaw direction is made in accordance to Ref. [2] and the results...... are presented on graphs and in a table....

  19. Wind power soars

    Energy Technology Data Exchange (ETDEWEB)

    Flavin, C. [Worldwatch Inst., Washington, DC (United States)

    1996-12-31

    Opinions on the world market for wind power are presented in this paper. Some data for global wind power generating capacity are provided. European and other markets are discussed individually. Estimated potential for wind power is given for a number of countries. 3 figs.

  20. Wind power outlook 2006

    Energy Technology Data Exchange (ETDEWEB)

    anon.

    2006-04-15

    This annual brochure provides the American Wind Energy Association's up-to-date assessment of the wind industry in the United States. This 2006 general assessment shows positive signs of growth, use and acceptance of wind energy as a vital component of the U.S. energy mix.