WorldWideScience

Sample records for widely accepted standard

  1. Optical and thermal simulation for wide acceptance angle CPV module

    Science.gov (United States)

    Ahmad, Nawwar; Ota, Yasuyuki; Araki, Kenji; Lee, Kan-Hua; Yamaguchi, Masafumi; Nishioka, Kensuke

    2017-09-01

    Concentrator photovoltaic (CPV) technology has the potential to decrease the cost of systems in the near future by using less expensive optical elements in the system which replace the receiving surface aperture and concentrate the sunlight onto small solar cells. One of the main concerns of CPV is the need for high precision tracking system and the relation to the acceptance angle. In this paper, we proposed a CPV module with concentration ratio larger than 100 times and wide acceptance angle. An optical simulation for the module with S-TIM2 glass as a lens material was conducted to estimate the optical performance of the module. Thermal and electrical simulation was also conducted using COMSOL Multiphysics and SPICE respectively to evaluate the working temperature and electrical characteristics of the multijunction solar cell under concentration conditions.

  2. 7 CFR 1717.605 - Design standards, plans and specifications, construction standards, and RUS accepted materials.

    Science.gov (United States)

    2010-01-01

    ..., construction standards, and RUS accepted materials. 1717.605 Section 1717.605 Agriculture Regulations of the... standards, plans and specifications, construction standards, and RUS accepted materials. All borrowers... system design, construction standards, and the use of RUS accepted materials. Borrowers must comply with...

  3. Standard-E hydrogen monitoring system field acceptance testprocedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1997-02-01

    The purpose of this document is to demonstrate that the Standard-E Hydrogen Monitoring Systems (SHMS-E) installed on the Waste Tank Farms in the Hanford 200 Areas are constructed as intended by the design.

  4. Demystifying Learning Technology Standards. Part II: Acceptance and Implementation.

    Science.gov (United States)

    Sonwalkar, Nishikant

    2002-01-01

    Discussion of learning technology standards focuses on acceptance and implementation, illustrated by SCORM specifications as applied to courseware development. Highlights include course structure; content hierarchy; multimedia assets; sharable content objects (SCOs); content aggregation; content packaging; categories of metadata; and content…

  5. Ideal standards, acceptance, and relationship satisfaction: Latitudes of differential effects

    National Research Council Canada - National Science Library

    Buyukcan-Tetik, A; Campbell, L; Finkenauer, C; Karremans, J.C.T.M; Kappen, G

    2017-01-01

    We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold...

  6. Standard-E hydrogen monitoring system shop acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  7. Ideal Standards, Acceptance, and Relationship Satisfaction: Latitudes of Differential Effects

    Directory of Open Access Journals (Sweden)

    Asuman Buyukcan-Tetik

    2017-09-01

    Full Text Available We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold. We tested our hypothesis using a 3-year longitudinal data set collected from heterosexual newlywed couples. We used two indicators of consistency: pattern correspondence (within-person correlation between ideal standards and perceived partner ratings and mean-level match (difference between ideal standards score and perceived partner score. Our results revealed that pattern correspondence had no relation with partner acceptance, but a positive linear/exponential association with relationship satisfaction. Mean-level match had a significant positive association with actor’s acceptance and relationship satisfaction up to the point where perceived partner score equaled ideal standards score. Partner effects did not show a consistent pattern. The results suggest that the consistency between ideal standards and perceived partner attributes has a non-linear association with acceptance and relationship satisfaction, although the results were more conclusive for mean-level match.

  8. Ideal Standards, Acceptance, and Relationship Satisfaction: Latitudes of Differential Effects

    OpenAIRE

    Buyukcan-Tetik, Asuman; Campbell, Lorne; Finkenauer, Catrin; Karremans, Johan C.; Kappen, Gesa

    2017-01-01

    We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold. We tested our hypothesis using a 3-year longitudinal data set collected from heterosexual newlywed couples. We used two indicators of consistency: pattern correspondence (within-person correlation between ideal standards and perceived partner ratings) and mean-level match (diffe...

  9. Ideal standards, acceptance, and relationship satisfaction: Latitudes of differential effects

    NARCIS (Netherlands)

    Buyukcan-Tetik, A.; Campbell, L.; Finkenauer, C.; Karremans, J.C.T.M.; Kappen, G.

    2017-01-01

    We examined whether the relations of consistency between ideal standards and perceptions of a current romantic partner with partner acceptance and relationship satisfaction level off, or decelerate, above a threshold. We tested our hypothesis using a three-year longitudinal data set collected from

  10. Metric Practice Guide for Teachers. Based on Accepted Canadian Standards.

    Science.gov (United States)

    Alberta Dept. of Education, Edmonton.

    Information is provided on current metric practices accepted by the Standards Council of Canada. Rules and examples are given for using units, symbols, and numerals. A table of metric prefixes; a list of units, prefixes and symbols; and a summary of commonly used units are provided. Interrelationships among units are noted. Information on…

  11. Standard-D hydrogen monitoring system acceptance test

    Energy Technology Data Exchange (ETDEWEB)

    Lott, D.T., Westinghouse Hanford

    1996-05-24

    This document details the results of the field Acceptance Testing of the Standard-D Hydrogen Monitoring System on the waste tank exhaust stacks in 241-AW and 241-AN tank farm. The monitors will be used to measure hydrogen and ammonia from the exhaust stacks.

  12. Standardization of DOE Disposal Facilities Waste Acceptance Process

    Energy Technology Data Exchange (ETDEWEB)

    SHRADER, T.; MACBETH, P.

    2002-01-01

    On February 25, 2000, the US. Department of Energy (DOE) issued the Record of Decision (ROD) for the Waste Management Programmatic Environmental Impact Statement (WM PEIS) for low-level and mixed low-level wastes (LLW/ MLLW) treatment and disposal. The ROD designated the disposal sites at Hanford and the Nevada Test Site (NTS) to dispose of LLWMLLW from sites without their own disposal facilities. DOE's Richland Operations Office (RL) and the National Nuclear Security Administration's Nevada Operations Office (NV) have been charged with effectively implementing the ROD. To accomplish this task NV and RL, assisted by their operating contractors Bechtel Nevada (BN), Fluor Hanford (FH), and Bechtel Hanford (BH) assembled a task team to systematically map out and evaluate the current waste acceptance processes and develop an integrated, standardized process for the acceptance of LLWMLLW. A structured, systematic, analytical process using the Six Sigma system identified disposal process improvements and quantified the associated efficiency gains to guide changes to be implemented. The review concluded that a unified and integrated Hanford/NTS Waste Acceptance Process would be a benefit to the DOE Complex, particularly the waste generators. The Six Sigma review developed quantitative metrics to address waste acceptance process efficiency improvements, and provides an initial look at development of comparable waste disposal cost models between the two disposal sites to allow quantification of the proposed improvements.

  13. Standardization of DOE Disposal Facilities Waste Acceptance Processes

    Energy Technology Data Exchange (ETDEWEB)

    Shrader, T. A.; Macbeth, P. J.

    2002-02-26

    On February 25, 2000, the U.S. Department of Energy (DOE) issued the Record of Decision (ROD) for the Waste Management Programmatic Environmental Impact Statement (WM PEIS) for low-level and mixed low-level wastes (LLW/ MLLW) treatment and disposal. The ROD designated the disposal sites at Hanford and the Nevada Test Site (NTS) to dispose of LLW/MLLW from sites without their own disposal facilities. DOE's Richland Operations Office (RL) and the National Nuclear Security Administration's Nevada Operations Office (NV) have been charged with effectively implementing the ROD. To accomplish this task NV and RL, assisted by their operating contractors Bechtel Nevada (BN), Fluor Hanford (FH), and Bechtel Hanford (BH) assembled a task team to systematically map out and evaluate the current waste acceptance processes and develop an integrated, standardized process for the acceptance of LLW/MLLW. A structured, systematic, analytical process using the Six Sigma system identified dispos al process improvements and quantified the associated efficiency gains to guide changes to be implemented. The review concluded that a unified and integrated Hanford/NTS Waste Acceptance Process would be a benefit to the DOE Complex, particularly the waste generators. The Six Sigma review developed quantitative metrics to address waste acceptance process efficiency improvements, and provides an initial look at development of comparable waste disposal cost models between the two disposal sites to allow quantification of the proposed improvements.

  14. Evaluation of disturbing effect of mesh holes in wide-acceptance-angle electrostatic mesh lenses

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Hiroyuki, E-mail: hmatsuda@ms.naist.jp [Nara Institute of Science and Technology (NAIST), 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan); Tóth, László [University of Debrecen, H-4032 Debrecen, Egyetemtér 1 (Hungary); Matsui, Fumihiko; Daimon, Hiroshi [Nara Institute of Science and Technology (NAIST), 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan)

    2014-08-15

    Highlights: • A practical method to evaluate the disturbing effect of mesh holes in electrostatic mesh lenses is described. • The method evaluates the image blur due to a mesh hole using the Davisson–Calbick formula. • The method considers the discrepancy in focal length in tangential and saggital planes. • The method can be applied to wide-acceptance-angle electrostatic mesh lenses. • The mesh-hole effect of a wide-acceptance-angle electrostatic lens considerably decreases with increasing the emission angle. - Abstract: A curved mesh electrode introduced into an electrostatic lens enables spherical aberration correction over a wide acceptance angle. This technique has great advantages in X-ray photoelectron spectroscopy and related techniques, allowing considerable increase in photoelectron intensity and efficient measurement of photoelectron angular distribution. However, the use of meshes severely limits spatial resolution, as the image produced through each mesh hole is blurred by the lens action of the hole. This feature is studied in detail in this paper, in order to determine the best possible resolution that can be attained in electrostatic mesh lenses with wide acceptance angles. A simple way to evaluate the mesh-hole effect is to use the Davisson–Calbick formula, which expresses the focal length of a single-aperture lens. To make this approach more feasible, we take into account the influence of the angle of incidence to a mesh hole. We characterize the image blur due to each mesh hole in two orthogonal directions, considering the discrepancy in focal length in tangential and sagittal planes. After the demonstration of the validity of our approach in a simple example, the mesh-hole effect of a wide-acceptance-angle electrostatic mesh lens is evaluated.

  15. Community-Wide Zero Energy Ready Home Standard

    Energy Technology Data Exchange (ETDEWEB)

    Herk, A. [IBACOS, Inc., Pittsburgh, PA (United States); Beggs, T. [IBACOS, Inc., Pittsburgh, PA (United States)

    2016-02-05

    This report outlines the steps a developer can take when creating and implementing high performance standards such as the U.S. Department of Energy’s (DOE’s) Zero Energy Ready Home (ZERH) standards on a community-wide scale. The report also describes the specific examples of how this process is underway in the Stapleton community in Denver, Colorado, by the developer Forest City.

  16. 40 CFR 63.471 - Facility-wide standards.

    Science.gov (United States)

    2010-07-01

    ... section, affected facility means all solvent cleaning machines, except solvent cleaning machines used in the manufacture and maintenance of aerospace products, solvent cleaning machines used in the... for Halogenated Solvent Cleaning § 63.471 Facility-wide standards. (a) Each owner or operator of an...

  17. The National Shipbuilding Research Program. Acceptance Standards for Nondestructive Test Not Required by Classification (Phase 2)

    National Research Council Canada - National Science Library

    Stern, I. L; Wheatcroft, M; Ku, D. Y; Cantore, D

    1985-01-01

    Current ABS requirements relative to nondestructive test and acceptance standards for radiographic and ultrasonic inspection are mainly intended for intersecting full penetration welds within the midship...

  18. Advancements in internationally accepted standards for radiation processing

    Science.gov (United States)

    Farrar, Harry; Derr, Donald D.; Vehar, David W.

    1993-10-01

    Three subcommittees of the American Society for Testing and Materials (ASTM) are developing standards on various aspects of radiation processing. Subcommittee E10.01 "Dosimetry for Radiation Processing" has published 9 standards on how to select and calibrate dosimeters, where to put them, how many to use, and how to use individual types of dosimeter systems. The group is also developing standards on how to use gamma, electron beam, and x-ray facilities for radiation processing, and a standard on how to treat dose uncertainties. Efforts are underway to promote inclusion of these standards into procedures now being developed by government agencies and by international groups such as the United Nations' International Consultative Group on Food Irradiation (ICGFI) in order to harmonize regulations and help avoid trade barriers. Subcommittee F10.10 "Food Processing and Packaging" has completed standards on good irradiation practices for meat and poultry and for fresh fruits, and is developing similar standards for the irradiation of seafood and spices. These food-related standards are based on practices previously published by ICGFI. Subcommittee E10.07 on "Radiation Dosimetry for Radiation Effects on Materials and Devices" principally develops standards for determining doses for radiation hardness testing of electronics. Some, including their standards on the Fricke and TLD dosimetry systems are equally useful in other radiation processing applications.

  19. Standard-C hydrogen monitoring system acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1994-09-02

    The primary function of the standard-C hydrogen monitoring system (SHMS) is to monitor specifically for hydrogen in the waste tank atmosphere which may also contain (but not be limited to) unknown quantities of air, nitrous oxide, ammonia, water vapor, carbon dioxide, carbon monoxide, and other gaseous constituents. The SHMS will consist of hydrogen specific monitors, a grab sampler to collect samples for laboratory analysis, a gas chromatograph, and the gas sample collection system necessary to support the operation of the instrumentation. This system will be located in a cabinet placed at the tank of interest. The purpose of this document is to demonstrate that the SHMS is constructed as intended by design.

  20. A wide-acceptance Compton spectrometer for spectral characterization of a medical x-ray source

    Science.gov (United States)

    Espy, Michelle A.; Gehring, A.; Belian, A.; Haines, T.; Hunter, J.; James, M.; Klasky, M.; Mendez, J.; Moir, D.; Sedillo, R.; Shurter, R.; Stearns, J.; Van Syoc, K.; Volegov, P.

    2016-03-01

    Accurate knowledge of the x-ray spectra used in medical treatment and radiography is important for dose calculations and material decomposition analysis. Indirect measurements via transmission through materials are possible. However, such spectra are challenging to measure directly due to the high photon fluxes. One method of direct measurement is via a Compton spectrometer (CS) method. In this approach, the x-rays are converted to a much lower flux of electrons via Compton scattering on a converter foil (typically beryllium or aluminum). The electrons are then momentum selected by bending in a magnetic field. With tight angular acceptance of electrons into the magnet of ~ 1 deg, there is a linear correlation between incident photon energy and electron position recorded on an image plate. Here we present measurements of Bremsstrahlung spectrum from a medical therapy machine, a Scanditronix M22 Microtron. Spectra with energy endpoints from 6 to 20 MeV are directly measured, using a CS with a wide energy range from 0.5 to 20 MeV. We discuss the sensitivity of the device and the effects of converter material and collimation on the accuracy of the reconstructed spectra. Approaches toward improving the sensitivity, including the use of coded apertures, and potential future applications to characterization of spectra are also discussed.

  1. 77 FR 29537 - Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service...

    Science.gov (United States)

    2012-05-18

    ... Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and..., which amended its regulations on Electric and Telecommunications Standards and Specifications for..., wood crossarms (solid and laminated), transmission timbers and pole keys, and for quality control and...

  2. Acceptance Factors Influencing Adoption of National Institute of Standards and Technology Information Security Standards: A Quantitative Study

    Science.gov (United States)

    Kiriakou, Charles M.

    2012-01-01

    Adoption of a comprehensive information security governance model and security controls is the best option organizations may have to protect their information assets and comply with regulatory requirements. Understanding acceptance factors of the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) comprehensive…

  3. Relationship between the standards of removable partial denture construction, clinical acceptability, and patient satisfaction.

    Science.gov (United States)

    Frank, R P; Brudvik, J S; Leroux, B; Milgrom, P; Hawkins, N

    2000-05-01

    Little is known about the importance of published fabrication standards in determining the outcome of treatment with mandibular distal extension removable partial dentures in patients of community practices. This study describes mandibular partial dentures worn by patients from King County, Wash., and examines the validity of standards of design and fabrication by relating the standards to measures of clinical acceptability and patient satisfaction. Eighty-two people treated in private dental practices who responded to a mail survey about satisfaction with a partial denture were examined. Eight standards of fabrication, overall clinical acceptability of the prosthesis, and tissue health were evaluated clinically. Patient satisfaction was assessed by questionnaire. Associations between variables were assessed by contingency tables and odds ratios. Half the prostheses met 4 or fewer of the 8 standards, and these were responsible for nearly all the displacement of tissue by the framework. Forty-three percent of the dentures (35/82) were rated clinically acceptable. Of the remaining dentures, 38 could be made acceptable by modifications. The remaining 9 dentures needed replacement. Sixty-three percent of the patients examined were satisfied with the dentures. There was a relationship between tissue health and the fabrication standards related to rest form, base extension, stress distribution, and framework fit. This study found no relation between tissue health and other design or fabrication features. None of the standards were found to be related to patient satisfaction. This study found partial support for the validity of design/fabrication standards for removable partial dentures. The most important standards are rest form, base extension, and stress distribution. The standards appear to be unrelated to patient satisfaction.

  4. The Double Standard at Sexual Debut: Gender, Sexual Behavior and Adolescent Peer Acceptance.

    Science.gov (United States)

    Kreager, Derek A; Staff, Jeremy; Gauthier, Robin; Lefkowitz, Eva S; Feinberg, Mark E

    2016-10-01

    A sexual double standard in adolescence has important implications for sexual development and gender inequality. The present study uses longitudinal social network data (N = 914; 11-16 years of age) to test if gender moderates associations between adolescents' sexual behaviors and peer acceptance. Consistent with a traditional sexual double standard, female adolescents who reported having sex had significant decreases in peer acceptance over time, whereas male adolescents reporting the same behavior had significant increases in peer acceptance. This pattern was observed net of respondents' own perceived friendships, further suggesting that the social responses to sex vary by gender of the sexual actor. However, findings for "making out" showed a reverse double standard, such that female adolescents reporting this behavior had increases in peer acceptance and male adolescents reporting the same behavior had decreases in peer acceptance over time. Results thus suggest that peers enforce traditional sexual scripts for both "heavy" and "light" sexual behaviors during adolescence. These findings have important implications for sexual health education, encouraging educators to develop curricula that emphasize the gendered social construction of sexuality and to combat inequitable and stigmatizing peer responses to real or perceived deviations from traditional sexual scripts.

  5. Sex segregation and equality in a multicultural society: inferiority as a standard for legal acceptability

    NARCIS (Netherlands)

    Brink, Marjolein van den; Loenen, T.; Tigchelaar, Jet

    2010-01-01

    This contribution explores the legal acceptability of old and new forms of sex segregation, using a multilayered ‘inferiority test’ that can be regarded as a specification of (inter)national equality and non-discrimination standards. The test is applied to a number of topical cases of sex

  6. Community-Wide Zero Energy Ready Home Standard

    Energy Technology Data Exchange (ETDEWEB)

    Herk, A. [IBACOS, Inc., Pittsburght, PA (United States); Beggs, T. [IBACOS, Inc., Pittsburght, PA (United States)

    2016-02-05

    This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the team gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.

  7. User Acceptance of Mobile Technology: A Campus-Wide Implementation of Blackboard's Mobile™ Learn Application

    Science.gov (United States)

    Chen, Baiyun; Sivo, Stephen; Seilhamer, Ryan; Sugar, Amy; Mao, Jin

    2013-01-01

    Mobile learning is a fast growing trend in higher education. This study examined how an extended technology acceptance model (TAM) could evaluate and predict the use of a mobile application in learning. A path analysis design was used to measure the mediating effects on the use of Blackboard's Mobile™ Learn application in coursework (N = 77). The…

  8. Food irradiation: Standards, regulations and world-wide trade

    Science.gov (United States)

    Roberts, Peter B.

    2016-12-01

    There is an established framework of international standards for food irradiation covering human health, plant protection, labelling, dose delivery, quality assurance and facility management. Approximately 60 countries permit irradiation of one or more food or food classes. National regulations are briefly reviewed. Decontamination of spices, herbs and condiments remains the single largest application of irradiation. However, in recent years the market for irradiated fresh and processed meat has become firmly established in several countries including China and the USA. At least 10 countries have recently established bi-lateral agreements for trade in irradiated fresh fruits and vegetables using phytosanitary irradiation. Irradiated fresh produce volumes now exceed 20,000 t per year. Rationalization and greater consistency in labelling regulations would be advantageous to the future growth of applications of food irradiation.

  9. 40 CFR 63.825 - Standards: Product and packaging rotogravure and wide-web flexographic printing.

    Science.gov (United States)

    2010-07-01

    ... rotogravure and wide-web flexographic printing. 63.825 Section 63.825 Protection of Environment ENVIRONMENTAL... POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for the Printing and Publishing Industry § 63.825 Standards: Product and packaging rotogravure and wide-web flexographic printing. (a) Each...

  10. Sex segregation and equality in a multicultural society: inferiority as a standard for legal acceptability

    OpenAIRE

    Marjolein van den Brink; Titia Loenen; Jet Tigchelaar

    2010-01-01

    This contribution explores the legal acceptability of old and new forms of sex segregation, using a multilayered ‘inferiority test’ that can be regarded as a specification of (inter)national equality and non-discrimination standards. The test is applied to a number of topical cases of sex segregation: 1) A traditional case of rather uncontested sex segregation in sports, specifically in amateur football; 2) A more controversial case that seems to be on the rise once again: sex-segregated educ...

  11. Radioactive waste management: review on clearance levels and acceptance criteria legislation, requirements and standards.

    Science.gov (United States)

    Maringer, F J; Suráň, J; Kovář, P; Chauvenet, B; Peyres, V; García-Toraño, E; Cozzella, M L; De Felice, P; Vodenik, B; Hult, M; Rosengård, U; Merimaa, M; Szücs, L; Jeffery, C; Dean, J C J; Tymiński, Z; Arnold, D; Hinca, R; Mirescu, G

    2013-11-01

    In 2011 the joint research project Metrology for Radioactive Waste Management (MetroRWM)(1) of the European Metrology Research Programme (EMRP) started with a total duration of three years. Within this project, new metrological resources for the assessment of radioactive waste, including their calibration with new reference materials traceable to national standards will be developed. This paper gives a review on national, European and international strategies as basis for science-based metrological requirements in clearance and acceptance of radioactive waste. © 2013 Elsevier Ltd. All rights reserved.

  12. 77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

    Science.gov (United States)

    2012-02-22

    ... COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard... ASTM F963-11 standard titled, Standard Consumer Safety Specifications for Toy Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will become a mandatory...

  13. Virtual glaucoma clinics: patient acceptance and quality of patient education compared to standard clinics

    Directory of Open Access Journals (Sweden)

    Court JH

    2015-04-01

    Full Text Available Jennifer H Court,1 Michael W Austin1,21Department of Ophthalmology, Singleton Hospital, Swansea, Wales, UK; 2Department of Ophthalmology, Neath Port Talbot Hospital, Swansea, Wales, UKPurpose: Virtual glaucoma clinics allow rapid, reliable patient assessment but the service should be acceptable to patients and concordance with treatment needs to be maintained with adequate patient education. This study compares experiences and understanding of patients reviewed via the virtual clinic versus the standard clinic by way of an extended patient satisfaction questionnaire (PSQ.Patients and methods: One hundred PSQs were given to consecutive patients attending glaucoma clinics in October 2013. All 135 patients reviewed via the virtual clinic from April 2013 until August 2013 were sent postal PSQs in September 2013. Data were obtained for demographics, understanding of glaucoma, their condition, satisfaction with their experience, and quality of information. Responses were analyzed in conjunction with the clinical records.Results: Eighty-five percent of clinic patients and 63% of virtual clinic patients responded to the PSQ. The mean satisfaction score was over 4.3/5 in all areas surveyed. Virtual clinic patients’ understanding of their condition was very good, with 95% correctly identifying their diagnosis as glaucoma, 83% as ocular hypertension and 78% as suspects. There was no evidence to support inferior knowledge or self-perceived understanding compared to standard clinic patients. Follow-up patients knew more about glaucoma than new patients. Over 95% of patients found our information leaflet useful. Forty percent of patients sought additional information but less than 20% used the internet for this.Conclusion: A substantial proportion of glaucoma pathway patients may be seen by non-medical staff supervised by glaucoma specialists via virtual clinics. Patients are accepting of this format, reporting high levels of satisfaction and non

  14. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Science.gov (United States)

    2010-10-01

    ... principles issued by the Financial Accounting Standards Board (FASB). 1200.2 Section 1200.2 Transportation... COMMERCE ACT § 1200.2 Adoption of generally accepted accounting principles issued by the Financial... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental...

  15. Formulation of a candidate glass for use as an acceptance test standard material

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, W.L.; Strachan, D.M.; Wolf, S.F.

    1998-04-01

    In this report, the authors discuss the formulation of a glass that will be used in a laboratory testing program designed to measure the precision of test methods identified in the privatization contracts for the immobilization of Hanford low-activity wastes. Tests will be conducted with that glass to measure the reproducibility of tests and analyses that must be performed by glass producers as a part of the product acceptance procedure. Test results will be used to determine if the contractually required tests and analyses are adequate for evaluating the acceptability of likely immobilized low-activity waste (ILAW) products. They will also be used to evaluate if the glass designed for use in these tests can be used as an analytical standard test material for verifying results reported by vendors for tests withg ILAW products. The results of those tests and analyses will be presented in a separate report. The purpose of this report is to document the strategy used to formulate the glass to be used in the testing program. The low-activity waste reference glass LRM that will be used in the testing program was formulated to be compositionally similar to ILAW products to be made with wastes from Hanford. Since the ILAW product compositions have not been disclosed by the vendors participating in the Hanford privatization project, the composition of LRM was formulated based on simulated Hanford waste stream and amounts of added glass forming chemicals typical for vitrified waste forms. The major components are 54 mass % SiO{sub 2}, 20 mass % Na{sub 2}O, 10 mass % Al{sub 2}O{sub 3}, 8 mass % B{sub 2}O{sub 3}, and 1.5 mass % K{sub 2}O. Small amounts of other chemicals not present in Hanford wastes were also included in the glass, since they may be included as chemical additives in ILAW products. This was done so that the use of LRM as a composition standard could be evaluated. Radionuclides were not included in LRM because a nonradioactive material was desired.

  16. Sex segregation and equality in a multicultural society: inferiority as a standard for legal acceptability

    Directory of Open Access Journals (Sweden)

    Marjolein van den Brink

    2010-06-01

    Full Text Available This contribution explores the legal acceptability of old and new forms of sex segregation, using a multilayered ‘inferiority test’ that can be regarded as a specification of (international equality and non-discrimination standards. The test is applied to a number of topical cases of sex segregation: 1 A traditional case of rather uncontested sex segregation in sports, specifically in amateur football; 2 A more controversial case that seems to be on the rise once again: sex-segregated education; 3 The highly controversial case of sex-segregated integration courses in the Netherlands. The outcome shows that each sex-segregated practice is problematic in the light of one or more criteria of this inferiority test, but not necessarily the same criteria. Specific attention is paid to the merits of the test in a multicultural context. The inferiority test is a useful tool in dealing with multicultural complexity, although not in every respect. It allows the impact of sex segregation on minority women to be taken into account, as well as cultural and religious reasons which women may have in demanding sex-segregation facilities, unless this will result in perpetuating their or other women’s subordination. Our findings suggest that the inferiority test is quite useful as an analytical tool to assess contested practices of sex segregation. However, the multilayered character of the test needs some fine-tuning when the various elements of the test lead to different conclusions.

  17. Improving Comprehensive Medication Review Acceptance by Using a Standardized Recruitment Script: A Randomized Control Trial.

    Science.gov (United States)

    Miguel, Alexander; Hall, Anna; Liu, Wei; Garrett, Jeremy; Ballew, Angel; Yang, Tsu-Hsaun; Segal, Richard

    2017-01-01

    The Centers for Medicare & Medicaid Services (CMS) require prescription drug plan sponsors to offer a comprehensive medication review (CMR) annually to eligible beneficiaries through the plans' Medication Therapy Management Programs (MTMPs). In 2011, the Pharmacy Quality Alliance endorsed the CMR completion rate as a quality measure for MTMPs, and CMS has adopted the measure into the 2016 CMS star ratings. CMS star ratings are used to describe the quality of plans to assist Medicare plan enrollees in choosing a plan and to determine quality bonus payments for Medicare Advantage plans. Star ratings are measured on a scale of 1 to 5, with 5 being the highest possible rating for an individual measure. Currently, the majority of plans score 2 stars or less on the CMR completion rate measure. To demonstrate the effectiveness of a standardized CMR recruitment script emphasizing the benefits of the service to increase acceptance of CMR offers among beneficiaries of a Medicare prescription drug plan. A CMR recruitment script, shaped by the Health Belief Model, was developed based on a previous pilot study. The original script described the CMR service but did not emphasize key benefits or barriers from the beneficiary perspective. The updated script aimed to enhance beneficiary understanding of the CMR service, explain the benefits from the beneficiary perspective, and address potential barriers to accepting the service. The updated script was tested during the 2012 MTMP enrollment in a randomized controlled experiment, using the original script as the control. The CMR service was offered to MTMP members via phone calls by live call agents who spoke with members who answered, using 1 of the 2 scripts. Both scripts asked members if they were willing to have a pharmacist call them back and perform a CMR at a later date. Two call attempts were made to all eligible beneficiaries. If contact was not made after 2 unsuccessful outreach attempts, a computer-generated voicemail

  18. Accepted standards on how to give a Medical Research Presentation: a systematic review of expert opinion papers

    Science.gov (United States)

    Blome, Christine; Sondermann, Hanno; Augustin, Matthias

    2017-01-01

    Background: This systematic review aimed to extract recommendations from expert opinion articles on how to give a medical research presentation on a scientific conference and to determine whether the experts agree on what makes an effective or poor presentation. Methods: Presentation-related terms were searched within article titles listed in PubMed, restricting the search to English-language articles published from January 1975 to July 2015. Recommendations were extracted from the articles, grouped by content, and analyzed for frequency. Ninety-one articles were included. Among 679 different recommendations, 29 were given in more than 20% of articles each. The five most frequent recommendations were to keep slides simple, adjust the talk to the audience, rehearse, not read the talk from slides or a manuscript, and make eye contact. Results: No article gave advice that was the complete opposite of the 29 most frequent recommendations with the exception of whether a light or dark background should be used for slides. Conclusions: Researchers should comply with these widely accepted standards to be perceived as effective presenters. PMID:28293678

  19. Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods.

    Science.gov (United States)

    Shanks, Orin C; Kelty, Catherine A; Oshiro, Robin; Haugland, Richard A; Madi, Tania; Brooks, Lauren; Field, Katharine G; Sivaganesan, Mano

    2016-05-01

    There is growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data quality across laboratories. Data quality is typically determined through a series of specifications that ensure good experimental practice and the absence of bias in the results due to DNA isolation and amplification interferences. However, there is currently a lack of consensus on how best to evaluate and interpret human fecal source identification qPCR experiments. This is, in part, due to the lack of standardized protocols and information on interlaboratory variability under conditions for data acceptance. The aim of this study is to provide users and reviewers with a complete series of conditions for data acceptance derived from a multiple laboratory data set using standardized procedures. To establish these benchmarks, data from HF183/BacR287 and HumM2 human-associated qPCR methods were generated across 14 laboratories. Each laboratory followed a standardized protocol utilizing the same lot of reference DNA materials, DNA isolation kits, amplification reagents, and test samples to generate comparable data. After removal of outliers, a nested analysis of variance (ANOVA) was used to establish proficiency metrics that include lab-to-lab, replicate testing within a lab, and random error for amplification inhibition and sample processing controls. Other data acceptance measurements included extraneous DNA contamination assessments (no-template and extraction blank controls) and calibration model performance (correlation coefficient, amplification efficiency, and lower limit of quantification). To demonstrate the implementation of the proposed standardized protocols and data acceptance criteria, comparable data from two additional laboratories were reviewed. The data acceptance criteria

  20. Comparison of acceptance-based and standard cognitive-based coping strategies for craving sweets in overweight and obese women.

    Science.gov (United States)

    Forman, Evan M; Hoffman, Kimberly L; Juarascio, Adrienne S; Butryn, Meghan L; Herbert, James D

    2013-01-01

    Existing strategies for coping with food cravings are of unknown efficacy and rely on principles that have been shown to have paradoxical effects. The present study evaluated novel, acceptance-based strategies for coping with craving by randomly assigning 48 overweight women to either an experimental psychological acceptance-oriented intervention or a standard cognitive reappraisal/distraction intervention. Participants were required to carry a box of sweets on their person for 72 h while abstaining from any consumption of sweets. Results suggested that the acceptance-based coping strategies resulted in lower cravings and reduced consumption, particularly for those who demonstrate greater susceptibility to the presence of food and report a tendency to engage in emotional eating. Copyright © 2012 Elsevier Ltd. All rights reserved.

  1. Towards internationally acceptable standards for food additives and contaminants based on the use of risk analysis

    NARCIS (Netherlands)

    Huggett, A.; Petersen, B.J.; Walker, R.; Fisher, C.E.; Notermans, S.H.W.; Rombouts, F.M.; Abbott, P.; Debackere, M.; Hathaway, S.C.; Hecker, E.F.F.; Knaap, A.G.A.; Kuznesof, P.M.; Meyland, I.; Moy, G.; Narbonne, J.-F.; Paakkanen, J.; Smith, M.R.; Tennant, D.; Wagstaffe, P.; Wargo, J.; Würtzen, G.

    1998-01-01

    Internationally acceptable norms need to incorporate sound science and consistent risk management principles in an open and transparent manner, as set out in the Agreement on the Application of Sanitary and Phytosanitary Measures (the SPS Agreement). The process of risk analysis provides a procedure

  2. 15 CFR 10.6 - Procedures for acceptance of a recommended standard.

    Science.gov (United States)

    2010-01-01

    ... determining average industry acceptance. (5) “Producer segment” means those persons who manufacture or produce... criteria set forth in these procedures has not been satisfied. (4) “Average industry acceptance” means a... responses to the distribution under paragraph (b) of this section indicates: (i) An average industry...

  3. A data base and a standard material for use in acceptance testing of low-activity waste products

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, S.F.; Ebert, W.L.; Luo, J.S.; Strachan, D.M.

    1998-04-01

    The authors have conducted replicate dissolution tests following the product consistency test (PCT) procedure to measure the mean and standard deviation of the solution concentrations of B, Na, and Si at various combinations of temperature, duration, and glass/water mass ratio. Tests were conducted with a glass formulated to be compositionally similar to low-activity waste products anticipated for Hanford to evaluate the adequacy of test methods that have been designated in privatization contracts for use in product acceptance. An important finding from this set of tests is that the solution concentrations generated in tests at 20 C will likely be too low to measure the dissolution rates of waste products reliably. Based on these results, the authors recommend that the acceptance test be conducted at 40 C. Tests at 40 C generated higher solution concentrations, were more easily conducted, and the measured rates were easily related to those at 20 C. Replicate measurements of other glass properties were made to evaluate the possible use of LRM-1 as a standard material. These include its composition, homogeneity, density, compressive strength, the Na leachability index with the ANSI/ANS 16.1 leach test, and if the glass is characteristically hazardous with the toxicity characteristic leach procedure. The values of these properties were within the acceptable limits identified for Hanford low-activity waste products. The reproducibility of replicate tests and analyses indicates that the glass would be a suitable standard material.

  4. 111 sun concentrator photovoltaic module with wide acceptance angle that can efficiently operate using 30-min intermittent tracking system

    Science.gov (United States)

    Ahmad, Nawwar; Ota, Yasuyuki; Araki, Kenji; Lee, Kan-Hua; Yamaguchi, Masafumi; Nishioka, Kensuke

    2017-09-01

    In this study, we propose a new concentrator photovoltaic (CPV) system design with a large-acceptance-angle lens, which tracks the sun on the basis of a new 30-min intermittent tracking method that does not require a special high-precision CPV tracking system. This will reduce costs, because a large percentage of the cost of a typical CPV system comes from the expensive accurate tracking system. The present system had a concentration ratio of 111 and an acceptance angle of 4.5°. We conducted an experiment to evaluate the thermal and electrical performances of the system in an outdoor test site in Miyazaki, Japan. The experimental results were compared with optical, thermal, and electrical simulation results. The simulated results showed good agreement with the experimental ones.

  5. The Nordic welfare model and welfare services - Can we maintain acceptable standards?

    DEFF Research Database (Denmark)

    Andersen, Torben M.

    income elasticity, and thus demands rise alongside improved material living standards (Wagner effects). The same implies to leisure, implying that tax bases may be eroded. In short, expenditures are on an upward drift and revenues on a downward trend, challenging the financial viability of the welfare...

  6. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Science.gov (United States)

    2010-07-01

    ... assemblies that share leads (electric conductors) through a common wall with another explosion-proof... to the International Electrotechnical Commission's (IEC) standards for Electrical Apparatus for..., Electrical Apparatus for Explosive Gas Atmospheres, Flameproof Enclosures “d” (IEC 60079-1, Fifth Edition...

  7. [Acceptance and practicability of evidence-based therapy standards in child and adolescent rehabilitation: results of a user survey].

    Science.gov (United States)

    Ahnert, J; Löffler, S; Winnefeld, M; Vogel, H

    2013-04-01

    The introduction of evidence-based therapy standards in child and adolescent rehabilitation of the German statutory pension insurance scheme (Deutsche Rentenversicherung Bund, 2011) was accompanied by a user survey that gave the participating rehabilitation centres the opportunity to comment on the new therapy standards and to suggest modifications.The survey questionnaire encompassed various topics related to the therapy standards, amongst them quality, comprehensibility, and acceptance, evaluation of feedback, and reasons for noncompliance with therapy standard requirements. For each of the 3 indications, a separate questionnaire was applied to assess modification suggestions regarding KTL therapy elements, the minimum percentage of patients to be treated accordingly, and the minimum duration of therapeutic procedures for each evidence-based treatment module. Responses from 14 rehab centres (return rate 54%) were obtained and analyzed.According to the majority of the responding rehabilitation centres, the therapy standards for child and adolescent rehabilitation fulfilled the quality features of topicality, multidisciplinarity, and relevance for routine rehabilitative practice. The degree of empirical grounding was evaluated more inconsistently. Difficulties with coding of KTL therapy elements were cited as the primary reasons for failing to comply with requirements in 2008.Exemplarily, the results of the user survey regarding the rehabilitative treatment of children and adolescents with obesity (age group: 8 years and older) are presented in detail.Concluding, the modifications to the therapy standards in child and adolescent rehabilitation introduced on the basis of the user survey are set out. © Georg Thieme Verlag KG Stuttgart · New York.

  8. IFRS STANDARDS AND THEIR POLITICAL ACCEPTANCE IN EUROPE AND UNITED STATES

    Directory of Open Access Journals (Sweden)

    Marta Lapková

    2011-01-01

    Full Text Available The year 2005 marked the start of a new era in global conduct of business, and thefulfillment of a thirty-year effort to create the financial reporting rules for a worldwidecapital market. For during that year’s financial reporting cycle, as many as 7,000 listedcompanies in the 25 European Union member states, plus many others in countries such asAustralia, New Zealand, Russia, and South Africa were expected (in the EU, required toproduce annual financial statements in compliance with a single set of international rules—International Financial Reporting Standards (IFRS. Many other business entities, whilenot publicly held and not currently required to comply with IFRS, will also do so, eitherimmediately or over time, in order to conform to what is clearly becoming the newworldwide standard. Since there are about 15,000 SEC-registered companies in the USAthat prepare financial statements in accordance with US GAAP (plus countless nonpubliclyheld companies also reporting under GAAP, the vast majority of the world’s largebusinesses will now be reporting under one or the other of these two comprehensivesystems of accounting and financial reporting rules.Most other national GAAP standards have been reduced in importance or are being phasedout as nations all over the worlds are now embracing IFRS. For example, Canada hasannounced that Canadian GAAP (which was very similar to US GAAP will be eliminatedand replaced by IFRS by 2011. More immediately, China will require listed companies toemploy IFRS. It is quite predictable that only US GAAP will (for the foreseeable futureremain as a competitive force in the accounting standards arena, and even that situation willbe more a formality than a substantive reality, given the formal commitment (andsubstantial progress made to date to “converge” US GAAP and IFRS.

  9. Readiness to accept Western standard of beauty and body satisfaction among Muslim girls with and without hijab.

    Science.gov (United States)

    Đurović, Dušanka; Tiosavljević, Marija; Šabanović, Harisa

    2016-10-01

    The purpose of this paper was to determine whether there is a difference in the readiness to accept Western standards of beauty in which thinness is an ideal of beauty and attractiveness, as well in body and appearance satisfaction between Muslim adolescent girls attending madrassa and dressing in accordance with tradition, that is to say wearing hijab, and Muslim adolescent girls who do not wear hijab and who follow contemporary Western-influenced fashion trends. Both of these groups were also compared to a non-Muslim group of adolescent girls. The sample consisted of 75 Muslim adolescent girls with hijab, 75 Muslim adolescent girls without hijab and 75 Orthodox adolescent girls. The following instruments were used: the Eating Attitudes Test (EAT-26), the Sociocultural Attitudes towards Appearance Questionnaire (SATAQ-3) and the Contour Drawing Rating Scale (CDRS). The highest level of body satisfaction (despite this group having the highest body weight in the sample) was evident among Muslim adolescent girls attending madrassa and wearing hijab. They also showed significantly less pressure to attain the Western thin-ideal standards of beauty than adolescent girls who accept Western way of dressing. Research results indicate a significant role of socio-cultural factors in one's attitude towards the body image, but also opens the question of the role of religion as a protective factor when it comes to the body and appearance attitude among Muslim women who wear hijab. © 2016 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

  10. Rape myth acceptance among Korean college students: the roles of gender, attitudes toward women, and sexual double standard.

    Science.gov (United States)

    Lee, Joohee; Kim, Jinseok; Lim, Hyunsung

    2010-07-01

    The purpose of the current study was to examine factors that influence rape myths among Korean college students. This study was particularly interested in the ways in which attitudes toward women and sexual double standard affect the relationship between gender and rape myths. Although the incidence of rape is a common concern in many current societies, within each society, the specific components of rape myths reflect the cultural values and norms of that particular society. A sample of 327 college students in South Korea completed the Korean Rape Myth Acceptance Scale-Revised, the Attitudes Toward Women Scale, and the Sexual Double Standard Scale. Structural equation modeling (SEM) was used to test hypothesized models. Results revealed that in three of the four models, rape survivor myths, rape perpetrator myths, and myths about the impact of rape, attitudes toward women were a more important predictor of rape myths than gender or sexual double standard. In the rape spontaneity myths model, on the other hand, sexual double standard was a more important predictor than gender or attitudes toward women. This study provides valuable information that can be useful in developing culturally specific rape prevention and victim intervention programs.

  11. Test and Calibration of the Digital World-Wide Standardized Seismograph

    Science.gov (United States)

    Peterson, Jon; Hutt, Charles R.

    1982-01-01

    BACKGROUND During the past decade there has been steady progress in the modernization of the global seismograph network operated by the U.S. Geological Survey (USGS). The World-Wide Standardized Seismograph Network (WWSSN) has been augmented by new stations with advanced instrumentation, including the Seismic Research Observatories (SRO) and the modified High-Gain Long-Period (ASRO) stations. One goal in the modernization effort has been to improve signal resolution in the long-period band. A second goal has been to generate a global digital data base to support contemporary computer-based analysis and research. In 1976, a Panel on Seismograph Networks was established by the Committee on Seismology of the National Academy of Sciences to review progress in network seismology and recommend actions that would lead to an improved global data base for seismology. One recommendation in the Panel report (Engdahl, 1977) called for upgrading selected WWSSN stations by the installation of digital recorders. This was viewed as an economical way of expanding the digital network, which had proven itself to be a very promising new tool for earthquake and explosion research. Funds for the development and assembly of 15 digital recorders were provided to the USGS by the Defense Advanced Research Projects Agency and an ad hoc panel of scientists was convened by the Committee on Seismology to advise the USGS on the selection of stations to be upgraded and on data recording requirements. A total of 19 digital World-Wide Standardized Seismograph (DWWSS) systems will be operational when all are installed. The additional systems were made available through purchase by the USGS and other organizations; for example, the University of Bergen purchased and installed a DWWSS-type recorder and agreed to furnish the USGS with the data. A list of operational and planned DWWSS network stations is given in Table 1.1. As one might expect, the digital recorder turned out to be somewhat more

  12. Estimation of Ecological Compensation Standards for Fallow Heavy Metal-Polluted Farmland in China Based on Farmer Willingness to Accept

    Directory of Open Access Journals (Sweden)

    Xue Xie

    2017-10-01

    Full Text Available In the context of China’s trial fallow policy; the heavy metal pollution of farmland is addressed via field surveys in Hunan Province, where the fallow policy has been implemented, and in Jiangxi Province, where it has not been implemented. We measured and analyzed willingness to accept (WTA using the contingent valuation method (CVM. The conclusions of this study are as follows: (1 Farmer awareness of heavy metal pollution and pollution sources is higher in Jiangxi Province than in Hunan Province; (2 Ignoring the impact of other factors, the WTA of farmers is 902 (yuan /mu in Jiangxi Province and 902.26 (yuan /mu in Hunan Province. Considering the influence of the basic characteristics of the respondents using the parameter estimation method, the WTA of farmers is 839.34 (yuan/mu in Jiangxi Province and 934.39 (yuan/mu in Hunan Province. There is little difference in WTA between the two provinces, but both estimates are higher than the national compensation standards; (3 The factors that affect the WTA of farmers in Jiangxi Province are gender, education level, average annual income and per capita arable land. The factors that affect the WTA of farmers in Hunan Province are age, education level, family size, average annual income, per capita arable land area and farmer occupation; (4 At present, the means and methods of compensation for the implementation of the fallow policy are recognized by most farmers. The paper concludes with some policy suggestions based on above findings.

  13. A low-phase-noise wide-band CMOS quadrature VCO for multi-standard RF front-ends

    DEFF Research Database (Denmark)

    Fard, Ali; Andreani, Pietro

    2005-01-01

    A low phase noise CMOS LC quadrature VCO (QVCO) with a wide frequency range of 3.6-5.6 GHz, designed in a standard 0.18 μm process for multi-standard front-ends, is presented. A significant advantage of the topology is the larger oscillation amplitude when compared to other conventional QVCO...... structures. The QVCO is compared to a double cross-coupled LC-tank differential oscillator, both in theory and experiments, for evaluation of its phase noise, providing a good insight into its performance. The measured data displays up to 2 dBc/Hz lower phase noise in the 1/f2 region for the QVCO, when...... consuming twice the current of the differential VCO, based on an identical LC-tank. Experimental results on the QVCO show a phase noise level of -127.5 dBc/Hz at 3 MHz offset from a 5.6 GHz carrier while dissipating 8 mA of current, resulting in a figure of merit of 181.3 dBc/Hz....

  14. Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods

    Science.gov (United States)

    There is a growing interest in the application of human-associated fecal sourceidentification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data q...

  15. Rape Myth Acceptance among Korean College Students: The Roles of Gender, Attitudes toward Women, and Sexual Double Standard

    Science.gov (United States)

    Lee, Joohee; Kim, Jinseok; Lim, Hyunsung

    2010-01-01

    The purpose of the current study was to examine factors that influence rape myths among Korean college students. This study was particularly interested in the ways in which attitudes toward women and sexual double standard affect the relationship between gender and rape myths. Although the incidence of rape is a common concern in many current…

  16. ETS levels in hospitality environments satisfying ASHRAE standard 62-1989: "ventilation for acceptable indoor air quality"

    Science.gov (United States)

    Moschandreas, D. J.; Vuilleumier, K. L.

    Prior to this study, indoor air constituent levels and ventilation rates of hospitality environments had not been measured simultaneously. This investigation measured indoor Environmental Tobacco Smoke-related (ETS-related) constituent levels in two restaurants, a billiard hall and a casino. The objective of this study was to characterize ETS-related constituent levels inside hospitality environments when the ventilation rates satisfy the requirements of the ASHRAE 62-1989 Ventilation Standard. The ventilation rate of each selected hospitality environment was measured and adjusted. The study advanced only if the requirements of the ASHRAE 62-1989 Ventilation Standard - the pertinent standard of the American Society of Heating, Refrigeration and Air Conditioning Engineers - were satisfied. The supply rates of outdoor air and occupant density were measured intermittently to assure that the ventilation rate of each facility satisfied the standard under occupied conditions. Six ETS-related constituents were measured: respirable suspended particulate (RSP) matter, fluorescent particulate matter (FPM, an estimate of the ETS particle concentrations), ultraviolet particulate matter (UVPM, a second estimate of the ETS particle concentrations), solanesol, nicotine and 3-ethenylpyridine (3-EP). ETS-related constituent levels in smoking sections, non-smoking sections and outdoors were sampled daily for eight consecutive days at each hospitality environment. This study found that the difference between the concentrations of ETS-related constituents in indoor smoking and non-smoking sections was statistically significant. Differences between indoor non-smoking sections and outdoor ETS-related constituent levels were identified but were not statistically significant. Similarly, differences between weekday and weekend evenings were identified but were not statistically significant. The difference between indoor smoking sections and outdoors was statistically significant. Most

  17. Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Conover, David R.

    2014-09-11

    The purpose of this document is to identify laws, rules, model codes, codes, standards, regulations, specifications (CSR) related to safety that could apply to stationary energy storage systems (ESS) and experiences to date securing approval of ESS in relation to CSR. This information is intended to assist in securing approval of ESS under current CSR and to identification of new CRS or revisions to existing CRS and necessary supporting research and documentation that can foster the deployment of safe ESS.

  18. Standard practice for qualification and acceptance of boron based metallic neutron absorbers for nuclear criticality control for dry cask storage systems and transportation packaging

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This practice provides procedures for qualification and acceptance of neutron absorber materials used to provide criticality control by absorbing thermal neutrons in systems designed for nuclear fuel storage, transportation, or both. 1.2 This practice is limited to neutron absorber materials consisting of metal alloys, metal matrix composites (MMCs), and cermets, clad or unclad, containing the neutron absorber boron-10 (10B). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. Postures of pediatric dentists toward endodontic standards and acceptance of novel technology in Udaipur city: A questionnaire survey

    Directory of Open Access Journals (Sweden)

    Chirag M Raiyani

    2015-01-01

    Full Text Available Background: To ascertain the current clinical practice of pediatric dentists involves utilization of a variety of materials and recent technological advances. Materials and Methods: A total of 218 pediatric dentists (118 males and 100 females were selected for the study those are registered in IDA Udaipur and surveyed using a self-administered questionnaire. Participants were divided into three groups according to their year of experience in the clinical practice. A total of 11 structured questions presented through a pilot study done among the 10% of the total participant′s related to endodontic procedure were used for the study. Frequency and percentage distribution were calculated. Results: The results showed that glass bead sterilization (41.3% was the most commonly used method for sterilization. Isolation during the pulpectomy procedure performed using cotton rolls and suction tip (40.4%. Most of them used hand instruments (58.3% among those; K-file (42.7% was widely used. Radiographic method (53.7% was most common procedure for determination of working length. Single sitting pulpectomy was not commonly preferred. Conclusion:The results of this study indicated that endodontic technology and materials for pulpectomy procedures are slowly being adapted in clinical practice in India. Therefore, pediatric dentist should update their knowledge and practice with current technology.

  20. The criteria for establishing an acceptable range of chemical, physical and biological indicators for the purpose of ecological standards developing

    Science.gov (United States)

    Evdokimova, Maria; Glazunov, Gennady; Yakovlev, Aleksandr

    2017-04-01

    The basis for development of standards for soil quality is based on the assessment of their resistance to external influences. The main criterion for assessing the environmental sustainability of soils and lands is the ability to perform their ecological functions (Nkonya et al, 2011, 2013; Costanza et al, 2014, Dobrovolsky and Nikitin, 1990; Yakovlev, Evdokimova, 2011). The limiting value of indicators of the state of the environment (physical, chemical, biological and other) corresponds to the value at which stability of environmental components is preserved (the ability to heal itself). Tht threshold for effect of stressor should be identified by the methods of bioindication and biotesting. The analysis obtained by these methods aimed to identify the highest indicator values of physical or chemical (concentration or dose of the stressor) effects, which have not yet fairly established negative changes in the organism, population of organisms or community. Using a theoretical model (Yakovlev et al, 2009, Gendugov., 2013) the problem of finding the threshold concentration is reduced to the finding of the singular points characterizing macroscopic "kinetics" of response in the phase space of dependence of the response rate upon the impact indicator. Singular points are determined by the analysis of derivatives. The theoretical model allows to calculate the singular points of the model (six of them), one of which, the maximum point corresponds to the highest concentration of the stressor at which it had no adverse effects on the test organisms. This point corresponds to the lowest concentration of the stressor at which it has no longer a stimulatory (hormesis) effect. Six singular points divide the whole range of stressors values (concentration) on seven bands with a unique range for each set of values of "macrokinetic" indicators of the living cells response to the impact of the stressor (concentration). Thus, the use of theoretical equations allowed us 1) to

  1. Risks for the readymix concrete producer and contractor according to the acceptance or rejection criteria specified in different standards (part I

    Directory of Open Access Journals (Sweden)

    Prada Betancourt, D. M.

    2005-12-01

    Full Text Available The objective of the present work is the study and comparison of the criteria for conformity and acceptance of the EHE (1, EN206-I (2 and ACI 318 (3 series of standards, which are in use in Spain, the European Community, the US and many Latin-American countries. As such, the paper starts with a conceptual differentiation of the conformity and acceptance criteria of each standard. The results of this analysis are operating characteristic curves for each respective standard that allow for the practical application and comparison of both types of criteria. The study ends with a number of conclusions that have been derived from the previous analysis.

    El objeto del presente trabajo es estudiar y comparar los criterios de conformidad y de aceptación de los códigos EHE (1, EN 206-1 (2, v ACI318 (3, utilizados en España, Comunidad Europea, Estados Unidos y en muchos países de Latinoamérica. El Trabajo esta dividido en dos partes. En la primera se diferenciarán conceptualmente los criterios de conformidad y los de aceptación y se analizará uno de los criterios de conformidad y aceptación de la EHE. En la segunda parte se analizarán los otros dos códigos EN 206-1, y ACI 318. El resultado de este análisis cristaliza en las curvas operativas de cada código, lo que permite su aplicación práctica y comparación. El trabajo finaliza con unas conclusiones derivadas del análisis precedente.

  2. Feasibility of establishing a biosafety level 3 tuberculosis culture laboratory of acceptable quality standards in a resource-limited setting: an experience from Uganda.

    Science.gov (United States)

    Ssengooba, Willy; Gelderbloem, Sebastian J; Mboowa, Gerald; Wajja, Anne; Namaganda, Carolyn; Musoke, Philippa; Mayanja-Kizza, Harriet; Joloba, Moses Lutaakome

    2015-01-15

    Despite the recent innovations in tuberculosis (TB) and multi-drug resistant TB (MDR-TB) diagnosis, culture remains vital for difficult-to-diagnose patients, baseline and end-point determination for novel vaccines and drug trials. Herein, we share our experience of establishing a BSL-3 culture facility in Uganda as well as 3-years performance indicators and post-TB vaccine trials (pioneer) and funding experience of sustaining such a facility. Between September 2008 and April 2009, the laboratory was set-up with financial support from external partners. After an initial procedure validation phase in parallel with the National TB Reference Laboratory (NTRL) and legal approvals, the laboratory registered for external quality assessment (EQA) from the NTRL, WHO, National Health Laboratories Services (NHLS), and the College of American Pathologists (CAP). The laboratory also instituted a functional quality management system (QMS). Pioneer funding ended in 2012 and the laboratory remained in self-sustainability mode. The laboratory achieved internationally acceptable standards in both structural and biosafety requirements. Of the 14 patient samples analyzed in the procedural validation phase, agreement for all tests with NTRL was 90% (P drug susceptibility testing (DST). The annual culture workload was 7,636, 10,242, and 2,712 inoculations for the years 2010, 2011, and 2012, respectively. Other performance indicators of TB culture laboratories were also monitored. Scores from EQA panels included smear microscopy >80% in all years from NTRL, CAP, and NHLS, and culture was 100% for CAP panels and above regional average scores for all years with NHLS. Quarterly DST scores from WHO-EQA ranged from 78% to 100% in 2010, 80% to 100% in 2011, and 90 to 100% in 2012. From our experience, it is feasible to set-up a BSL-3 TB culture laboratory with acceptable quality performance standards in resource-limited countries. With the demonstrated quality of work, the laboratory attracted

  3. “Heidelberg standard examination” and “Heidelberg standard procedures” – Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education

    Directory of Open Access Journals (Sweden)

    Nikendei, C.

    2016-08-01

    Full Text Available The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects “Heidelberg standard examination” and “Heidelberg standard procedures”, which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties.

  4. “Heidelberg standard examination” and “Heidelberg standard procedures” – Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education

    Science.gov (United States)

    Nikendei, C.; Ganschow, P.; Groener, J. B.; Huwendiek, S.; Köchel, A.; Köhl-Hackert, N.; Pjontek, R.; Rodrian, J.; Scheibe, F.; Stadler, A.-K.; Steiner, T.; Stiepak, J.; Tabatabai, J.; Utz, A.; Kadmon, M.

    2016-01-01

    The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects “Heidelberg standard examination” and “Heidelberg standard procedures”, which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties. PMID:27579354

  5. Green-to-red photoconvertible fluorescent proteins: tracking cell and protein dynamics on standard wide-field mercury arc-based microscopes

    Directory of Open Access Journals (Sweden)

    Buckheit Robert W

    2010-02-01

    Full Text Available Abstract Background Green fluorescent protein (GFP and other FP fusions have been extensively utilized to track protein dynamics in living cells. Recently, development of photoactivatable, photoswitchable and photoconvertible fluorescent proteins (PAFPs has made it possible to investigate the fate of discrete subpopulations of tagged proteins. Initial limitations to their use (due to their tetrameric nature were overcome when monomeric variants, such as Dendra, mEos, and mKikGR were cloned/engineered. Results Here, we report that by closing the field diaphragm, selective, precise and irreversible green-to-red photoconversion (330-380 nm illumination of discrete subcellular protein pools was achieved on a wide-field fluorescence microscope equipped with standard DAPI, Fluorescein, and Rhodamine filter sets and mercury arc illumination within 5-10 seconds. Use of a DAPI-filter cube with long-pass emission filter (LP420 allowed the observation and control of the photoconversion process in real time. Following photoconversion, living cells were imaged for up to 5 hours often without detectable phototoxicity or photobleaching. Conclusions We demonstrate the practicability of this technique using Dendra2 and mEos2 as monomeric, photoconvertible PAFP representatives fused to proteins with low (histone H2B, medium (gap junction channel protein connexin 43, and high (α-tubulin; clathrin light chain dynamic cellular mobility as examples. Comparable efficient, irreversible green-to-red photoconversion of selected portions of cell nuclei, gap junctions, microtubules and clathrin-coated vesicles was achieved. Tracking over time allowed elucidation of the dynamic live-cycle of these subcellular structures. The advantage of this technique is that it can be performed on a standard, relatively inexpensive wide-field fluorescence microscope with mercury arc illumination. Together with previously described laser scanning confocal microscope-based photoconversion

  6. Building America Top Innovations 2014 Profile: ASHRAE Standard 62.2. Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-11-01

    This 2014 Top Innovations profile describes Building America research and support in developing and gaining adoption of ASHRAE 62.2, a residential ventilation standard that is critical to transforming the U.S. housing industry to high-performance homes.

  7. Comparison of Threshold Saccadic Vector Optokinetic Perimetry (SVOP) and Standard Automated Perimetry (SAP) in Glaucoma. Part II: Patterns of Visual Field Loss and Acceptability.

    Science.gov (United States)

    McTrusty, Alice D; Cameron, Lorraine A; Perperidis, Antonios; Brash, Harry M; Tatham, Andrew J; Agarwal, Pankaj K; Murray, Ian C; Fleck, Brian W; Minns, Robert A

    2017-09-01

    We compared patterns of visual field loss detected by standard automated perimetry (SAP) to saccadic vector optokinetic perimetry (SVOP) and examined patient perceptions of each test. A cross-sectional study was done of 58 healthy subjects and 103 with glaucoma who were tested using SAP and two versions of SVOP (v1 and v2). Visual fields from both devices were categorized by masked graders as: 0, normal; 1, paracentral defect; 2, nasal step; 3, arcuate defect; 4, altitudinal; 5, biarcuate; and 6, end-stage field loss. SVOP and SAP classifications were cross-tabulated. Subjects completed a questionnaire on their opinions of each test. We analyzed 142 (v1) and 111 (v2) SVOP and SAP test pairs. SVOP v2 had a sensitivity of 97.7% and specificity of 77.9% for identifying normal versus abnormal visual fields. SAP and SVOP v2 classifications showed complete agreement in 54% of glaucoma patients, with a further 23% disagreeing by one category. On repeat testing, 86% of SVOP v2 classifications agreed with the previous test, compared to 91% of SAP classifications; 71% of subjects preferred SVOP compared to 20% who preferred SAP. Eye-tracking perimetry can be used to obtain threshold visual field sensitivity values in patients with glaucoma and produce maps of visual field defects, with patterns exhibiting close agreement to SAP. Patients preferred eye-tracking perimetry compared to SAP. This first report of threshold eye tracking perimetry shows good agreement with conventional automated perimetry and provides a benchmark for future iterations.

  8. Industry-wide Inter-organizational Systems and Data Quality : Exploratory findings of the use of GS1 standards in the Dutch retail market

    NARCIS (Netherlands)

    Dalmolen, Simon; Moonen, Hans; van Hillegersberg, Jos

    2015-01-01

    Standards in general promise more efficiency and effectiveness in doing (electronic) business. Lowering the costs of collaboration, achieving these gains depends of the development and adoption of the standard in its business environment. Several studies report on research on electronic data

  9. Adequacy of a hospital-wide standard dose of 7mg/kg bodyweight gentamicin sufficient to achieve an adequate prophylactic maximum serum concentration (Cmax) in burn patients undergoing surgical burn wound treatment

    NARCIS (Netherlands)

    Borra, L.C.P.; Bosch, T.M.; Baar, M.E. van; Dokter, J.; Oen, I.M.; Ruijgrok, E.J.

    2016-01-01

    INTRODUCTION: Pharmacokinetics of drugs can be significantly altered in burn patients. The aim of our study was to validate if the current hospital-wide standard dosage of 7mg/kg total bodyweight gentamicin is sufficient to achieve an adequate prophylactic Cmax (Cmax>/=20mg/L). MATERIALS AND

  10. [Acceptance and commitment therapy].

    Science.gov (United States)

    Ducasse, D; Fond, G

    2015-02-01

    Acceptance and commitment therapy (ACT) is a third generation of cognitive-behavioral therapies. The point is to help patients to improve their psychological flexibility in order to accept unavoidable private events. Thus, they have the opportunity to invest energy in committed actions rather than struggle against their psychological events. (i) To present the ACT basic concepts and (ii) to propose a systematic review of the literature about effectiveness of this kind of psychotherapy. (i) The core concepts of ACT come from Monestès (2011), Schoendorff (2011), and Harris (2012); (ii) we conducted a systematic review of the literature using the PRISMA's criteria. The research paradigm was « acceptance and commitment therapy AND randomized controlled trial ». The bases of the MEDLINE, Cochrane and Web of science have been checked. Overall, 61 articles have been found, of which, after reading the abstracts, 40 corresponded to the subject of our study. (I) Psychological flexibility is established through six core ACT processes (cognitive defusion, acceptance, being present, values, committed action, self as context), while the therapist emphasizes on experiential approach. (II) Emerging research shows that ACT is efficacious in the psychological treatment of a wide range of psychiatric problems, including psychosis, depression, obsessive-compulsive disorder, trichotillomania, generalized anxiety disorder, post-traumatic stress disorder, borderline personality disorder, eating disorders. ACT has also shown a utility in other areas of medicine: the management chronic pain, drug-dependence, smoking cessation, the management of epilepsy, diabetic self-management, the management of work stress, the management of tinnitus, and the management of multiple sclerosis. Meta-analysis of controlled outcome studies reported an average effect size (Cohen's d) of 0.66 at post-treatment (n=704) and 0.65 (n=580) at follow-up (on average 19.2 weeks later). In studies involving

  11. A Study of Low-Power Wide-Area Networks and an In-Depth Study of the LoRaWAN Standard

    OpenAIRE

    PETTER, LAGUSSON; JOHANNA, NORDLÖF

    2017-01-01

    Low Power Wide Area Networks (LPWAN) are able to combine long range communication with a low energy consumption sacrificing performance in terms of bit rate and message frequency. This thesis presents a general evaluation of the LPWAN characteristics and a description of the LPWAN protocols LoRaWAN, SigFox and NB-IoT. It also covers a method to evaluate if a LPWAN technology would be a suitable choice of communication technology for a certain use case. Lastly, it covers the implementation of ...

  12. Empirical ranking of a wide range of WC-Co grades in terms of their abrasion resistance measured by the ASTM standard B 611-85 test

    CSIR Research Space (South Africa)

    O'Quigley, DGF

    1997-01-01

    Full Text Available tests The abrasion testing for all the grades was car- ried out in accordance with the ASTM Standard B 61 l-85 for the abrasion testing of cemented carbides. The abrasion tester consists of a wheel of diameter 169 mm and width 13 mm. The wheel... variation may be linked to the uncertainty in the grain L 0 5 10 15 20 25 30 35 40 45 50 Cobalt content (wt%) Fig. 1. Summary of the measured carbide grain size and the cobalt content of the WC-Co grades tested. The grades are divided into four sets...

  13. Review of Consensus Standard Spectra for Flat Plate and Concentrating Photovoltaic Performance

    Energy Technology Data Exchange (ETDEWEB)

    Myers, D.

    2011-09-01

    Consensus standard reference terrestrial solar spectra are used to establish nameplate ratings for photovoltaic device performance at standard reporting conditions. This report describes reference solar spectra developed in the United States and international consensus standards community which are widely accepted as of this writing (June 2011).

  14. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  15. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... Activation Model. We tested this proposition by means of an online survey of Danish (N=323), Norwegian (N=303) and Swiss (N=324) private consumers. The study confirms that adding personal norms to the independent variables of the Technology Acceptance Model leads to a significant increase in the explained...

  16. Open Standards for Emergency Mangement

    Science.gov (United States)

    Jones, E.

    2012-04-01

    The mission of the OASIS (Organization for the Advancement of Structured Information Standards) Emergency Management Technical Committee (EM-TC) is to create incident and emergency-related standards for data interoperability. The TC welcomes participation from members of the emergency management community, developers and implementers, and members of the public concerned with disaster management and response. Since the foundation of the EM-TC in 2003, there have been several Standards developed to support this mission. The first and most widely accepted has been the Common Alerting Protocol (CAP). CAP has been adopted worldwide and is also ITU Recommendation 1303. The EM-TC has continued in the development of content data standards to support the emergency management mission. This suite of standards is referred to as the Emergency Data Exchange Language (EDXL) family of standards. The EDXL suite of standards are developed starting with a defined requirement from the response community. The requirements are vetted through a working group process, reviewed by the development community to determine whether the concepts once "standardized" will result in software that will be developed then provided with comments to the OASIS EM-TC for defining the standard. The OASIS process includes an open public review period where all comments are accepted and publically adjudicated. The EDXL-Distribution Element (DE), EDXL-Resource Management (RM), EDXL-Hospital Availability eXchange (HAVE) are all now ratified Standards. The EDXL-Situation Reporting (SitRep) Standard is in final review and the EXDL-Tracking of Emergency Patients (TEP) is in development. This presentation will briefly present each of the OASIS EM-TC Standards as well as the process for their development and review. Information will be provided about how to participate in the process as well as where open source code can be found to get started developing systems of systems using the EDXL Standards.

  17. Standardized Payment Procedures as Key Enabling Factor for Mobile Commerce

    OpenAIRE

    Kreyer, Nina; Pousttchi, Key; Turowski, Klaus

    2002-01-01

    Companies are not going to invest into the development of innovative applications or services unless these can be charged for appropriately. Thus, the existence of standardized and widely accepted mobile payment procedures is crucial for successful business-to-customer mobile commerce. In this paper we reflect on the acceptance of mobile payment and examine the characteristics of current mobile payment procedures. The outcomes of the paper are a categorization of current mobile payment proced...

  18. Adequacy of a hospital-wide standard dose of 7mg/kg bodyweight gentamicin sufficient to achieve an adequate prophylactic maximum serum concentration (Cmax) in burn patients undergoing surgical burn wound treatment.

    Science.gov (United States)

    Borra, Lennaert C P; Bosch, Tessa M; van Baar, Margriet E; Dokter, Jan; Oen, Irma M; Ruijgrok, Elisabeth J

    2016-12-01

    Pharmacokinetics of drugs can be significantly altered in burn patients. The aim of our study was to validate if the current hospital-wide standard dosage of 7mg/kg total bodyweight gentamicin is sufficient to achieve an adequate prophylactic Cmax (Cmax≥20mg/L). A prospective observational cohort pharmacokinetic study was conducted in burn patients undergoing surgical burn wound treatment. 36/40 (90%) burn patients undergoing surgical burn wound treatment at Rotterdam Burn Centre (Maasstad Hospital), the Netherlands, achieved adequate prophylactic serum concentrations (Cmax≥20mg/L) after a single prophylactic intravenous dose of 7mg/kg total bodyweight gentamicin. Total Body Surface Area (TBSA) burned and total bodyweight were statistically significantly correlated with the Cmax, with correlation coefficients of -0.316, 0.443 and p values of 0.047, 0.004, respectively. Other covariates (age, time after injury, serum creatinine, dose, gender, intensive care admittance) were not statistically significantly correlated. Occurrence of postoperative infection was limited (n=1), no statistically significant difference was observed between patients with a therapeutic and patients with a subtherapeutic serum concentration. The current hospital-wide standard dosage of 7mg/kg total bodyweight is sufficient to achieve an adequate prophylactic Cmax in burn patients undergoing surgical burn wound treatment. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

  19. ARC Code TI: ACCEPT

    Data.gov (United States)

    National Aeronautics and Space Administration — ACCEPT consists of an overall software infrastructure framework and two main software components. The software infrastructure framework consists of code written to...

  20. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjec...

  1. Ultra wide band antennas

    CERN Document Server

    Begaud, Xavier

    2013-01-01

    Ultra Wide Band Technology (UWB) has reached a level of maturity that allows us to offer wireless links with either high or low data rates. These wireless links are frequently associated with a location capability for which ultimate accuracy varies with the inverse of the frequency bandwidth. Using time or frequency domain waveforms, they are currently the subject of international standards facilitating their commercial implementation. Drawing up a complete state of the art, Ultra Wide Band Antennas is aimed at students, engineers and researchers and presents a summary of internationally recog

  2. Object Individuation or Object Movement as Attractor? A Replication of the Wide-Screen/Narrow-Screen Study by Means of (a Standard Looking Time Methodology and (b Eye Tracking

    Directory of Open Access Journals (Sweden)

    Peter Krøjgaard

    2013-01-01

    Full Text Available We report a replication experiment of a mechanized version of the seminal wide-screen/narrow-screen design of Wilcox and Baillargeon (1998 with 9.5-month-old infants (N=80. Two different methodologies were employed simultaneously: (a the standard looking time paradigm and (b eye tracking. Across conditions with three different screen sizes, the results from both methodologies revealed a clear and interesting pattern: the looking times increased as a significantly linear function of reduced screen sizes, that is, independently of the number of different objects involved. There was no indication in the data that the infants made use of the featural differences between the different-looking objects involved. The results suggest a simple, novel, and thought-provoking interpretation of the infants’ looking behavior in the wide-screen/narrow-screen design: moving objects are attractors, and the more space left for visible object movement in the visual field, the longer are infants’ looks. Consequently, no cognitive interpretation may be needed.

  3. Nature preservation acceptance model applied to tanker oil spill simulations

    DEFF Research Database (Denmark)

    Friis-Hansen, Peter; Ditlevsen, Ove Dalager

    2003-01-01

    is exemplified by a study of oil spills due to simulated tanker collisions in the Danish straits. It is found that the distribution of the oil spill volume per spill is well represented by an exponential distribution both in Oeresund and in Great Belt. When applied in the Poisson model, a risk profile reasonably...... close to the standard lognormal profile is obtained. Moreover, based on data pairs (volume, cost) for world wide oil spills it is inferred that the conditional distribution of the costs given the spill volume is well modeled by a lognormal distribution. By unconditioning by the exponential distribution...... of the single oil spill, a risk profile for the costs is obtained that is indistinguishable from the standard lognormal risk profile.Finally the question of formulating a public risk acceptance criterion is addressed following Ditlevsen, and it is argued that a Nature Preservation Willingness Index can...

  4. Analysis of Scrum acceptance

    OpenAIRE

    Vončina, Bojan

    2016-01-01

    The purpose of the thesis was to analyse the acceptance of Scrum methodology, which has become one of the leading agile methodologies, and to find out which were the key factors that influenced the acceptance. The analysis was conducted in Comtrade, which is one of the largest Slovenian software development companies. The First part (theoretical part) contains an introduction chapter, a detailed presentation of Scrum methodology and the presentation of theoretical models, on which practical ...

  5. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjects...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  6. 7 CFR 42.107 - Lot acceptance criteria.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Lot acceptance criteria. 42.107 Section 42.107... REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS Procedures for Stationary Lot Sampling and Inspection § 42.107 Lot acceptance criteria. (a) The acceptability of the lot is determined by relating the number...

  7. Hanford Site Solid Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-17

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  8. Acceptable variability in external quality assessment programmes for basic semen analysis.

    Science.gov (United States)

    Palacios, E R; Clavero, A; Gonzalvo, M C; Rosales, A; Mozas, J; Martínez, L; Ramírez, J P; Björndahl, L; Morancho-Zaragoza, J; Fernández-Pardo, E; Castilla, J A

    2012-02-01

    External quality assessment is essential in modern andrology laboratories. To assess the proficiency of laboratories participating in an external quality assessment programme (EQAP), limits for acceptable variability must be determined. Limits currently specified largely depend on criteria set by the organizers of individual EQAP schemes. The objective of this study was to evaluate the different criteria described in ISO 13528: 2005 for calculating acceptable variability in EQAP when applied to basic semen analysis parameters. The data used in this study were the means and standard deviations obtained for independent samples from two EQAPs, one national (Spanish) and one international (European). The acceptable variability according to ISO 13528: 2005 was calculated using four types of criteria: (i) ± 3 standard deviations of the results of all participating laboratories; (ii) ± 3 standard deviations of the results of expert laboratories; (iii) quality specifications based on biological variability, state-of-the-art and clinicians' opinions and (iv) the same quality specifications adjusted for the uncertainty of the assigned value. The first two strategies resulted in very wide ranges of acceptable variability. Conversely, the strategy based only on quality specifications resulted in very narrow ranges. For the fourth strategy, acceptable ranges were intermediate between the results produced with the other strategies. The third and fourth strategies did not produce observable differences in acceptable ranges when the model used for calculating the specifications of analytical quality was changed. It is essential that EQAPs for semen parameters should determine the ranges for acceptable variability in results. Moreover, these ranges must be clinically useful, i.e. the variability should have a minimal negative impact on clinical decisions. The exact definition of 'expert laboratory' is more important than the model chosen for estimating analytical quality

  9. Robustness - acceptance criteria

    DEFF Research Database (Denmark)

    Rizzuto, Enrico; Sørensen, John Dalsgaard; Kroon, Inger B.

    2010-01-01

    This factsheet describes the general framework on the bases of which acceptance criteria for requirements on the robustness of structures can be set. Such framework is based on the more general concept of risk-based assessment of engineering systems. The present factsheet is to be seen in conjunc......This factsheet describes the general framework on the bases of which acceptance criteria for requirements on the robustness of structures can be set. Such framework is based on the more general concept of risk-based assessment of engineering systems. The present factsheet is to be seen...

  10. From motivation to acceptability

    DEFF Research Database (Denmark)

    Nordfalk, Francisca; Olejaz, Maria; Jensen, Anja M. B.

    2016-01-01

    Background: Over the past three decades, public attitudes to organ donation have been a subject of numerous studies focusing on donor motivation. Here, we present a fresh approach. We suggest focusing on public acceptability instead of motivation. The point is to understand public attitudes well...

  11. Why was Relativity Accepted?

    Science.gov (United States)

    Brush, S. G.

    Historians of science have published many studies of the reception of Einstein's special and general theories of relativity. Based on a review of these studies, and my own research on the role of the light-bending prediction in the reception of general relativity, I discuss the role of three kinds of reasons for accepting relativity (1) empirical predictions and explanations; (2) social-psychological factors; and (3) aesthetic-mathematical factors. According to the historical studies, acceptance was a three-stage process. First, a few leading scientists adopted the special theory for aesthetic-mathematical reasons. In the second stage, their enthusiastic advocacy persuaded other scientists to work on the theory and apply it to problems currently of interest in atomic physics. The special theory was accepted by many German physicists by 1910 and had begun to attract some interest in other countries. In the third stage, the confirmation of Einstein's light-bending prediction attracted much public attention and forced all physicists to take the general theory of relativity seriously. In addition to light-bending, the explanation of the advance of Mercury's perihelion was considered strong evidence by theoretical physicists. The American astronomers who conducted successful tests of general relativity became defenders of the theory. There is little evidence that relativity was `socially constructed' but its initial acceptance was facilitated by the prestige and resources of its advocates.

  12. Displacement compressors - acceptance tests

    CERN Document Server

    International Organization for Standardization. Geneva

    1996-01-01

    ISO 1217:2009 specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors. It also specifies methods for testing liquid-ring type compressors and the operating and testing conditions which apply when a full performance test is specified.

  13. Approaches to acceptable risk

    Energy Technology Data Exchange (ETDEWEB)

    Whipple, C.

    1997-04-30

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.

  14. Antenna standards and laboratories in Europe

    DEFF Research Database (Denmark)

    Lemanczyk, Jerzy

    1995-01-01

    organizations, there exists several organs within Europe whose aims are to define, coordinate and implement standards, laboratory certification, multilateral acceptance of testing and calibration as well as international acceptance of the same. These include ETSI, the European Telecommunications Standards...

  15. Pssssst! What Does One Call a Set of Non-Empirical Beliefs Required To Be Accepted on Faith and Enforced by Authority? [Answer: A Religion, AKA the ISLLC Standards].

    Science.gov (United States)

    English, Fenwick W.

    2000-01-01

    The Interstate School Leaders Licensure Consortium Standards are ambiguous and empirically insupportable. "Professional consensus" does not equal epistemology. Administrators licensed for practice in the 21st century will resemble secular Jesuits following an ideological agenda that exceeds the science left behind in the pragmatic…

  16. 12 CFR 250.164 - Bankers' acceptances.

    Science.gov (United States)

    2010-01-01

    .... The legislative history of the BESA indicates no intent to change this domestic acceptance limitation... financial statements prepared in accordance with local accounting practices and an explanation of the accounting terminology and the major features of the accounting standards used in the preparation of the...

  17. Marketing for Acceptance

    OpenAIRE

    Tina L. Johnston, Ph.D.

    2009-01-01

    Becoming a researcher comes with the credentializing pressure to publish articles in peer-reviewed journals (Glaser, 1992; Glaser, 2007; Glaser, 2008). The work intensive process is exacerbated when the author’s research method is grounded theory. This study investigated the concerns of early and experienced grounded theorists to discover how they worked towards publishing research projects that applied grounded theory as a methodology. The result was a grounded theory of marketing for accept...

  18. Crew Transportation Operations Standards

    Science.gov (United States)

    Mango, Edward J.; Pearson, Don J. (Compiler)

    2013-01-01

    The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

  19. Order acceptance with reinforcement learning

    NARCIS (Netherlands)

    Mainegra Hing, M.; van Harten, Aart; Schuur, Peter

    2001-01-01

    Order Acceptance (OA) is one of the main functions in a business control framework. Basically, OA involves for each order a 0/1 (i.e., reject/accept) decision. Always accepting an order when capacity is available could unable the system to accept more convenient orders in the future. Another

  20. Age and Acceptance of Euthanasia.

    Science.gov (United States)

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  1. Standard development at the Human Variome Project.

    Science.gov (United States)

    Smith, Timothy D; Vihinen, Mauno

    2015-01-01

    The Human Variome Project (HVP) is a world organization working towards facilitating the collection, curation, interpretation and free and open sharing of genetic variation information. A key component of HVP activities is the development of standards and guidelines. HVP Standards are systems, procedures and technologies that the HVP Consortium has determined must be used by HVP-affiliated data sharing infrastructure and should be used by the broader community. HVP guidelines are considered to be beneficial for HVP affiliated data sharing infrastructure and the broader community to adopt. The HVP also maintains a process for assessing systems, processes and tools that implement HVP Standards and Guidelines. Recommended System Status is an accreditation process designed to encourage the adoption of HVP Standards and Guidelines. Here, we describe the HVP standards development process and discuss the accepted standards, guidelines and recommended systems as well as those under acceptance. Certain HVP Standards and Guidelines are already widely adopted by the community and there are committed users for the others. © The Author(s) 2015. Published by Oxford University Press.

  2. 1996 DOE technical standards program workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  3. Acceptance Priority Ranking & Annual Capacity Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-07-31

    The Nuclear Waste Policy Act of 1982, as amended (the Act), assigns the Federal Government the responsibility for the disposal of spent nuclear fuel and high-level waste. Section 302(a) of the Act authorizes the Secretary to enter into contracts with the owners and generators of commercial spent nuclear fuel and/or high-level waste. The Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste (Standard Contract) established the contractual mechanism for the Department's acceptance and disposal of spent nuclear fuel and high-level waste. It includes the requirements and operational responsibilities of the parties to the Standard Contract in the areas of administrative matters, fees, terms of payment, waste acceptance criteria, and waste acceptance procedures. The Standard Contract provides for the acquisition of title to the spent nuclear fuel and/or high-level waste by the Department, its transportation to Federal facilities, and its subsequent disposal.

  4. VAMOS: a VAriable MOde high acceptance Spectrometer

    CERN Document Server

    Savajols, H

    1999-01-01

    The study of reactions induced by the future SPIRAL beams at GANIL requires new techniques: the low intensity of secondary beams implies the need of a very high efficiency detection system ; the study of nearly or completely unknown nuclei, over a wide range of masses and energies, needs a very efficient method for attributing a reaction product to a nucleus. The VAriable MOde high acceptance Spectrometer VAMOS is being designed and built especially for this purpose.

  5. Risk Acceptance and Expectations of Scalp Allotransplantation.

    Science.gov (United States)

    Choi, Jun Ho; Kim, Kwang Seog; Shin, Jun Ho; Hwang, Jae Ha; Lee, Sam Yong

    2016-06-01

    In scalp allotransplantation, the scalp from a brain-dead donor, including hair, is transferred to a recipient with scalp defects. Opinions differ on the appropriateness of scalp allotransplantation. In order to maintain graft function and cosmetic outcomes, scalp transplantation recipients would need to receive lifelong immunosuppression treatments. The risks of this immunosuppression have to be balanced against the fact that receiving a scalp allotransplant does not extend lifespan or restore a physical function. Therefore, the present study aimed to investigate risk acceptance and expectations regarding scalp allotransplantation in different populations. A questionnaire survey study was conducted. A total of 300 subjects participated; survey was conducted amongst the general public (n=100), kidney transplantation recipients (n=50), a group of patient who required scalp reconstruction due to tumor or trauma (n=50), and physicians (n=100). The survey was modified by using the Korean version of the Louisville instrument for transplantation questionnaire. Risk acceptance and expectations for scalp transplantation varied widely across the groups. Kidney transplantation recipients revealed the highest risk acceptance and expectations, whereas the physicians were most resistant to the risks of scalp transplantation. Our study demonstrates that, in specific groups, scalp allotransplantation and the need for immunosuppression carries an acceptable risk despite the lack of lifeextending benefits. Our results suggest that scalp allotransplantation can be an acceptable alternative to existing scalp reconstruction surgeries in patients with pre-existing need for immunosuppression.

  6. Children acceptance of laser dental treatment

    Science.gov (United States)

    Lazea, Andreea; Todea, Carmen

    2016-03-01

    Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

  7. Sharing Data for Production Scheduling Using the ISA-95 Standard

    OpenAIRE

    Iiro eHarjunkoski; Reinhard eBauer

    2014-01-01

    In the development and deployment of production scheduling solutions, one major challenge is to establish efficient information sharing with industrial production management systems. Information comprising production orders to be scheduled, processing plant structure, product recipes, available equipment, and other resources are necessary for producing a realistic short-term production plan. Currently, a widely accepted standard for information sharing is missing. This often leads to the impl...

  8. Public acceptance of biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Savvanidou, Electra; Zervas, Efthimios; Tsagarakis, Konstantinos P. [Department of Environmental Engineering, Democritus University of Thrace, Vas. Sofias 12, 67100 Xanthi (Greece)

    2010-07-15

    The public acceptance of biofuels in Greece is examined in this work. The analysis of 571 face to face interviews shows that 90.7% of the respondents believe that climatic changes are related to fossil fuel consumption, while only 23.8% know the difference between biodiesel and bioethanol. 76.1% believe that energy saving should precede the use of an alternative source of energy. Only 27.3% believe that priority must be given to biofuels over other renewable energy sources. Only 49.9% think that the use of biofuels can be an effective solution against climatic changes and 53.9% believe that the use of biofuels can be an effective solution for the energy problem. Finally, 80.9% of the car owners are willing to use biofuels, 44.8% are willing to pay the supplementary amount of 0.06 EUR/L of the fuel market price, while the average amount reported as willing to pay was 0.079 EUR/L on top of the fuel market price. Furthermore, eight models correlating the eight main responses with several socioeconomic variables are developed and analyzed. Those findings heave important policy implications related to the use and promotion of biofuels. (author)

  9. Sharing data for production scheduling using the ISA-95 standard

    Directory of Open Access Journals (Sweden)

    Iiro eHarjunkoski

    2014-10-01

    Full Text Available In the development and deployment of production scheduling solutions one major challenge is to establish efficient information sharing with industrial production management systems. Information comprising production orders to be scheduled, processing plant structure, product recipes, available equipment and other resources are necessary for producing a realistic short-term production plan. Currently, a widely-accepted standard for information sharing is missing. This often leads to the implementation of costly custom-tailored interfaces, or in the worst case the scheduling solution will be abandoned. Additionally, it becomes difficult to easily compare different methods on various problem instances, which complicates the re-use of existing scheduling solutions. In order to overcome these hurdles, a platform-independent and holistic approach is needed. Nevertheless, it is difficult for any new solution to gain wide acceptance within industry as new standards are often refused by companies already using a different established interface. From an acceptance point of view, the ISA-95 standard could act as a neutral data-exchange platform. In this paper, we assess if this already widespread standard is simple, yet powerful enough to act as the desired holistic data-exchange for scheduling solutions.

  10. Introducing a standard method for experimental determination of the solvent response in laser pump, x-ray probe time-resolved wide-angle x-ray scattering experiments on systems in solution

    DEFF Research Database (Denmark)

    Kjær, Kasper Skov; Brandt van Driel, Tim; Kehres, Jan

    2013-01-01

    In time-resolved laser pump, X-ray probe wide-angle X-ray scattering experiments on systems in solution the structural response of the system is accompanied by a solvent response. The solvent response is caused by reorganization of the bulk solvent following the laser pump event, and in order to ...

  11. Acceptability of beehive products as ingredients in quinoa bars.

    Science.gov (United States)

    Rios, Francisco; Lobo, Manuel; Samman, Norma

    2018-01-01

    The aim of this work was to develop a puffed quinoa bar with beehive products of high content of phenolic compounds, based on acceptability and perception of consumers. A rotational central composite design of three variables (honey, pollen and propolis) was used for food product formulation. The responses to optimize were sensorial acceptability and polyphenol content. Next to acceptability a check-all-that-apply (CATA) test was performed with 115 consumers. Preference maps were used to relate acceptability and sensorial attributes of bars that cause rejection or acceptance. The experimental design determined that pollen and propolis significantly increased phenolic content but decreased acceptability of formulations. Preference maps established that attributes like astringency, bitter flavor, pungency and intense yellow color were associated with the low acceptability while attributes of sweetness and weak astringency were related to high acceptance of products. Range of polyphenol content determined in the widely accepted formulations was 2.15-2.91 g kg-1 , significantly higher than commercial products. The incorporation of beehive products, in quinoa bars, increased the total polyphenol content and the functional properties, but at the same time reduced the consumer acceptability. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  12. American acceptance of nuclear power

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, W.

    The characteristic adventurous spirit that built American technology will eventually lead to American acceptance of nuclear power unless an overpowering loss of nerve causes us to reject both nuclear technology and world leadership. The acceptance of new technology by society has always been accompanied by activist opposition to industralization. To resolve the debate between environmental and exploitive extremists, we must accept with humility the basic premise that human accomplishment is a finite part of nature. (DCK)

  13. LGBT Youth and Family Acceptance

    OpenAIRE

    Katz-Wise, Sabra L.; Rosario, Margaret; Tsappis, Michael

    2016-01-01

    In this article, we address theories of attachment and parental acceptance and rejection, and their implications for lesbian, gay, bisexual, and transgender (LGBT) youths’ identity and health. We also provide two clinical cases to illustrate the process of family acceptance of a transgender youth and a gender nonconforming youth who was neither a sexual minority nor transgender. Clinical implications of family acceptance and rejection of LGBT youth are discussed.

  14. LGBT Youth and Family Acceptance

    Science.gov (United States)

    Katz-Wise, Sabra L.; Rosario, Margaret; Tsappis, Michael

    2016-01-01

    Summary In this article, we address theories of attachment and parental acceptance and rejection, and their implications for lesbian, gay, bisexual, and transgender (LGBT) youths’ identity and health. We also provide two clinical cases to illustrate the process of family acceptance of a transgender youth and a gender nonconforming youth who was neither a sexual minority nor transgender. Clinical implications of family acceptance and rejection of LGBT youth are discussed. PMID:27865331

  15. Mile wide, inch deep?

    Science.gov (United States)

    Carlowicz, Michael

    Compared to their counterparts in other nations, American grade school students learn a lot less about a lot more. According to a new report entitled A Splintered Vision: An Investigation of U.S. Science and Mathematics Education, a student in the United States is expected to absorb information about a wide array of topics in a school year, yet he or she is seldom given the opportunity to explore any one topic in depth. The report was funded by the National Science Foundation (NSF) and is part of the Third International Mathematics and Science Study (TIMSS), a five-year project to compare teaching and student achievement in 45 countries.Before they reach high school, American students will have covered more topics than 75% of the students in other countries; yet in many cases, they will have been taught some of the same topics several years in a row. Researchers also criticized conventional U.S. education standards for being unfocused and aimed at the lowest common denominator. They noted that most American textbooks make minimal demands on students and they represent “a limited notion” of what should be discussed in “basic” texts.

  16. Consumer Acceptance of Novel Foods

    NARCIS (Netherlands)

    Fischer, A.R.H.; Reinders, M.J.

    2016-01-01

    The success of novel foods depends to a considerable extent on whether consumers accept those innovations. This chapter provides an overview of current knowledge relevant to consumer acceptance of innovations in food. A broad range of theories and approaches to assess consumer response to

  17. Consumer and professional standards: working towards consensus

    OpenAIRE

    Williamson, C.

    2000-01-01

    Standards of treatment and care should be acceptable to healthcare consumers as well as to healthcare professionals. A simple categorisation of standards according to their acceptability to consumers is outlined. Professional/consumer groups which review and set standards are discussed, with emphasis on the principles of partnership. Working together towards consensus can be difficult but is now an important way forward.

  18. A comparative study of performance measurement standards of railway operator

    Directory of Open Access Journals (Sweden)

    Pongjirawut Siripong

    2017-01-01

    Full Text Available The European standard (EN 13816, is one of the widely accepted standards for measuring the quality of public passenger transport (PPT service. EN 13816 indicates 8 measurement criteria, 29 sub-criteria and 193 Key Performance Indicators (KPIs to be used to measure the performance of railway operators. Nowadays, there are other addition criteria beyond EN13816, developed by various organisations. This research firstly aims to explore the service performance measurement of railway operators used by actual railway operators at international level and in Thailand. After an intensive review of performance measurement standards, 9 standards are compiled and compared in terms of criteria, sub-criteria and KPIs using a cluster analysis methodology. The result found additional performance measurement aspects at 2 sub-criteria and 91 KPIs in addition to EN 13816. This research summarized and compared different performance measurement standards to measure service quality of metro rail line.

  19. Acceptability Engineering: the Study of user Acceptance of Innovative Technologies

    Directory of Open Access Journals (Sweden)

    Hee-Cheol Kim

    2015-04-01

    Full Text Available The discipline of human-computer interaction (HCI has been vital in developing understandings of users, usability, and the design of user-centered computer systems. However, it does not provide a satisfactory explanation of user perspectives on the specialized but important domain of innovative technologies, instead focusing more on mature technologies. In particular, the success of innovative technologies requires attention to be focused on early adopters of the technology and enthusiasts, rather than general end-users. Therefore, user acceptance should be considered more important than usability and convenience. At present, little is known about the ways in which innovative technologies are evaluated from the point of view of user acceptance. In this paper, we propose Acceptability Engineering as an academic discipline through which theories and methods for the design of acceptable innovative technologies can be discussed.

  20. Standards not that standard.

    Science.gov (United States)

    Vilanova, Cristina; Tanner, Kristie; Dorado-Morales, Pedro; Villaescusa, Paula; Chugani, Divya; Frías, Alba; Segredo, Ernesto; Molero, Xavier; Fritschi, Marco; Morales, Lucas; Ramón, Daniel; Peña, Carlos; Peretó, Juli; Porcar, Manuel

    2015-01-01

    There is a general assent on the key role of standards in Synthetic Biology. In two consecutive letters to this journal, suggestions on the assembly methods for the Registry of standard biological parts have been described. We fully agree with those authors on the need of a more flexible building strategy and we highlight in the present work two major functional challenges standardization efforts have to deal with: the need of both universal and orthogonal behaviors. We provide experimental data that clearly indicate that such engineering requirements should not be taken for granted in Synthetic Biology.

  1. Market Acceptance of Smart Growth

    Science.gov (United States)

    This report finds that smart growth developments enjoy market acceptance because of stability in prices over time. Housing resales in smart growth developments often have greater appreciation than their conventional suburban counterparts.

  2. 45 CFR 73.735-505 - Acceptance of awards and prizes.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Acceptance of awards and prizes. 73.735-505 Section 73.735-505 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION STANDARDS OF CONDUCT Gifts, Entertainment, and Favors § 73.735-505 Acceptance of awards and prizes. (a) Employees may accept awards, including cash awards,...

  3. Health Care Wide Hazards

    Science.gov (United States)

    ... Scope | Glossary | References | Site Map | Credits Hospital eTool Administration Central Supply Clinical Services Dietary Emergency Engineering Healthcare Wide Hazards Heliport Housekeeping ICU Laboratory Laundry ...

  4. PV standards overview

    Science.gov (United States)

    DeBlasio, Richard

    1997-02-01

    A brief historical perspective and current status of the on going evolution of photovoltaic standards development and the use of these standards in promulgating accepted practices used in producing, measuring, and deploying Photovoltaic (PV) components and systems in the field. After nearly 20 years of experience in developing and writing domestic and international consensus PV standards the need and importance of standard methods and practices continues, as in the past, to be essential for a maturing PV industry. Part of this maturity has been in establishing and maintaining a common ground through the development of consensus standards and furthering the use of standards for PV commercialization in support of test facility accreditation, product certification, systems deployment, and safety code development to assure PV quality, performance, reliability, and safety.

  5. Acceptance test procedure for the 105-KW isolation barrier leak rate

    Energy Technology Data Exchange (ETDEWEB)

    McCracken, K.J.

    1995-05-19

    This acceptance test procedure shall be used to: First establish a basin water loss rate prior to installation of the two isolation barriers between the main basin and the discharge chute in K-Basin West. Second, perform an acceptance test to verify an acceptable leakage rate through the barrier seals. This Acceptance Test Procedure (ATP) has been prepared in accordance with CM-6-1 EP 4.2, Standard Engineering Practices.

  6. Vaccine acceptance: the UK perspective.

    Science.gov (United States)

    Ford, John A; Mahgoub, Hamid; Shankar, Ananda Giri

    2013-12-01

    The United Kingdom has had a long history with vaccine acceptability dating back to Edward Jenner's theory of small pox vaccination. More recently, the discredited, Wakefield study published in 1998 continues to cause MMR skepticism. In pregnant women pertussis vaccination has been considerably more successful than influenza vaccination. Influenza vaccine uptake in healthcare workers remains poor. The media, politicians, and health reforms have contributed to the mixed coverage for these vaccines. In this article we examine vaccine acceptability from a UK perspective, and consider the future impact this is likely to have on the introduction of rotavirus and shingles vaccine in the UK in 2013.

  7. Is it acceptable to use animals to model obese humans?

    DEFF Research Database (Denmark)

    Lund, Thomas Bøker; Sørensen, Thorkild I.A.; Olsson, I. Anna S.

    2014-01-01

    Animal use in medical research is widely accepted on the basis that it may help to save human lives and improve their quality of life. Recently, however, objections have been made specifically to the use of animals in scientific investigation of human obesity. This paper discusses two arguments...

  8. L-286 Acceptance Test Record

    Energy Technology Data Exchange (ETDEWEB)

    HARMON, B.C.

    2000-01-14

    This document provides a detailed account of how the acceptance testing was conducted for Project L-286, ''200E Area Sanitary Water Plant Effluent Stream Reduction''. The testing of the L-286 instrumentation system was conducted under the direct supervision

  9. Nitrogen trailer acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Kostelnik, A.J.

    1996-02-12

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0249. The equipment was tested according to WHC-SD-WM-ATP-108 Rev.0. The equipment being tested is a portable contained nitrogen supply. The test was conducted at Norco`s facility.

  10. Euthanasia Acceptance: An Attitudinal Inquiry.

    Science.gov (United States)

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  11. Acceptance and Commitment Therapy: Introduction

    Science.gov (United States)

    Twohig, Michael P.

    2012-01-01

    This is the introductory article to a special series in Cognitive and Behavioral Practice on Acceptance and Commitment Therapy (ACT). Instead of each article herein reviewing the basics of ACT, this article contains that review. This article provides a description of where ACT fits within the larger category of cognitive behavior therapy (CBT):…

  12. Energy justice: Participation promotes acceptance

    Science.gov (United States)

    Baxter, Jamie

    2017-08-01

    Wind turbines have been a go-to technology for addressing climate change, but they are increasingly a source of frustration for all stakeholders. While community ownership is often lauded as a panacea for maximizing turbine acceptance, a new study suggests that decision-making involvement — procedural fairness — matters most.

  13. Consumer acceptance of functional foods

    DEFF Research Database (Denmark)

    Frewer, Lynn J.; Scholderer, Joachim; Lambert, Nigel

    2003-01-01

    to which they are likely to buy products with particular functional properties. Various cross-cultural and demographic differences in acceptance found in the literature are reviewed, as well as barriers to dietary change. In conclusion, it is argued that understanding consumer's risk perceptions...

  14. Does Acceptance and Relationship Focused Behavior Therapy Contribute to Bupropion Outcomes? A Randomized Controlled Trial of Functional Analytic Psychotherapy and Acceptance and Commitment Therapy for Smoking Cessation

    Science.gov (United States)

    Gifford, Elizabeth V.; Kohlenberg, Barbara S.; Hayes, Steven C.; Pierson, Heather M.; Piasecki, Melissa P.; Antonuccio, David O.; Palm, Kathleen M.

    2011-01-01

    This study evaluated a treatment combining bupropion with a novel acceptance and relationship focused behavioral intervention based on the acceptance and relationship context (ARC) model. Three hundred and three smokers from a community sample were randomly assigned to bupropion, a widely used smoking cessation medication, or bupropion plus…

  15. The NA49 large acceptance hadron detector

    CERN Document Server

    Afanasiev, S V; Appelshäuser, H; Bächler, J; Barna, D; Barnby, L S; Bartke, Jerzy; Barton, R A; Betev, L; Bialkowska, H; Bieser, F; Billmeier, A; Blyth, C O; Böck, R K; Bormann, C; Bracinik, J; Brady, F P; Brockmann, R; Brun, R; Buncic, P; Caines, H L; Cebra, D; Cooper, G E; Cramer, J G; Csató, P; Cyprian, M; Dunn, J; Eckardt, V; Eckhardt, F; Empl, T; Eschke, J; Ferguson, M I; Fessler, H; Fischer, H G; Flierl, D; Fodor, Z; Frankenfeld, Ulrich; Foka, P Y; Freund, P; Friese, V; Ftácnik, J; Fuchs, M; Gabler, F; Gál, J; Ganz, R E; Gazdzicki, M; Gladysz-Dziadus, E; Grebieszkow, J; Günther, J; Harris, J W; Hegyi, S; Henkel, T; Hill, L A; Hlinka, V; Huang, I; Hümmler, H; Igo, G; Irmscher, D; Ivanov, M; Janik, R; Jacobs, P; Jones, P G; Kadija, K; Kolesnikov, V I; Kowalski, M; Lasiuk, B; Lévai, Peter; Liebicher, K; Lynen, U; Malakhov, A I; Margetis, S; Markert, C; Marks, C; Mayes, B W; Melkumov, G L; Mock, A; Molnár, J; Nelson, J M; Oldenburg, M; Odyniec, Grazyna Janina; Pálla, G; Panagiotou, A D; Pestov, Yu N; Petridis, A; Pikna, M; Pimpl, W; Pinsky, L; Piper, A; Porter, R J; Poskanzer, A M; Poziombka, S; Prindle, D J; Pühlhofer, F; Rauch, W; Reid, J G; Renfordt, R E; Retyk, W; Ritter, H G; Röhrich, D; Roland, C; Roland, G; Rudolph, H; Rybicki, A; Sammer, T; Sandoval, A; Sann, H; Schäfer, E; Schmidt, R; Schmischke, D; Schmitz, N; Schönfelder, S; Semenov, A Yu; Seyboth, J; Seyboth, P; Seyerlein, J; Siklér, F; Sitár, B; Skrzypczak, E; Squier, G T A; Stelzer, H; Stock, Reinhard; Strmen, P; Ströbele, H; Struck, C; Susa, T; Szarka, I; Szentpétery, I; Szymanski, P; Sziklai, J; Toy, M; Trainor, T A; Trentalange, S; Ullrich, T S; Vassiliou, Maria; Veres, G I; Vesztergombi, G; Vranic, D; Wang, F; Weerasundara, D D; Wenig, S; Whitten, C; Wieman, H H; Wienold, T; Wood, L; Yates, T A; Zimányi, J; Zhu, X Z; Zybert, R

    1999-01-01

    The NA49 detector is a wide acceptance spectrometer for the study of hadron production in p+p, p+A, and A+A collisions at the CERN SPS. The main components are 4 large volume TPCs for tracking and particle identification via $dE/dx$. TOF scintillator arrays complement particle identification. Calorimeters for transverse energy determination and triggering, a detector for centrality selection in p+A collisions, and beam definition detectors complete the set-up. A description of all detector components is given with emphasis on new technical realizations. Performance and operational experience are discussed in particular with respect to the high track density environment of central Pb+Pb collisions.

  16. NetCDF-CF-OPeNDAP: Standards for ocean data interoperability and object lessons for community data standards processes

    Science.gov (United States)

    Hankin, Steven C.; Blower, Jon D.; Carval, Thierry; Casey, Kenneth S.; Donlon, Craig; Lauret, Olivier; Loubrieu, Thomas; Srinivasan, Ashwanth; Trinanes, Joaquin; Godøy, Øystein; Mendelssohn, Roy; Signell, Richard P.; de La Beaujardiere, Jeff; Cornillon, Peter; Blanc, Frederique; Rew, Russ; Harlan, Jack; Hall, Julie; Harrison, D.E.; Stammer, Detlef

    2010-01-01

    It is generally recognized that meeting society's emerging environmental science and management needs will require the marine data community to provide simpler, more effective and more interoperable access to its data. There is broad agreement, as well, that data standards are the bedrock upon which interoperability will be built. The path that would bring the marine data community to agree upon and utilize such standards, however, is often elusive. In this paper we examine the trio of standards 1) netCDF files; 2) the Climate and Forecast (CF) metadata convention; and 3) the OPeNDAP data access protocol. These standards taken together have brought our community a high level of interoperability for "gridded" data such as model outputs, satellite products and climatological analyses, and they are gaining rapid acceptance for ocean observations. We will provide an overview of the scope of the contribution that has been made. We then step back from the information technology considerations to examine the community or "social" process by which the successes were achieved. We contrast the path by which the World Meteorological Organization (WMO) has advanced the Global Telecommunications System (GTS) - netCDF/CF/OPeNDAP exemplifying a "bottom up" standards process whereas GTS is "top down". Both of these standards are tales of success at achieving specific purposes, yet each is hampered by technical limitations. These limitations sometimes lead to controversy over whether alternative technological directions should be pursued. Finally we draw general conclusions regarding the factors that affect the success of a standards development effort - the likelihood that an IT standard will meet its design goals and will achieve community-wide acceptance. We believe that a higher level of thoughtful awareness by the scientists, program managers and technology experts of the vital role of standards and the merits of alternative standards processes can help us as a community to

  17. CONVERGENCE OF INTERNATIONAL AUDIT STANDARDS AND AMERICAN AUDIT STANDARDS REGARDING SAMPLING

    Directory of Open Access Journals (Sweden)

    Chis Anca Oana

    2013-07-01

    Full Text Available Abstract: Sampling is widely used in market research, scientific analysis, market analysis, opinion polls and not least in the financial statement audit. We wonder what is actually sampling and how did it appear? Audit sampling involves the application of audit procedures to less than 100% of items within an account balance or class of transactions. Nowadays the technique is indispensable, the economic entities operating with sophisticated computer systems and large amounts of data. Economic globalization and complexity of capital markets has made possible not only the harmonization of international accounting standards with the national ones, but also the convergence of international accounting and auditing standards with the American regulations. International Standard on Auditing 530 and Statement on Auditing Standard 39 are the two main international and American normalized referentials referring to audit sampling. This article discusses the origin of audit sampling, mentioning a brief history of the method and different definitions from literature review. The two standards are studied using Jaccard indicators in terms of the degree of similarity and dissimilarity concerning different issues. The Jaccard coefficient measures the degree of convergence of international auditing standards (ISA 530 and U.S. auditing standards (SAS 39. International auditing standards and American auditing standards, study the sampling problem, both regulations presenting common points with regard to accepted sampling techniques, factors influencing the audit sample, treatment of identified misstatements and the circumstances in which sampling is appropriate. The study shows that both standards agree on application of statistical and non-statistical sampling in auditing, that sampling is appropriate for tests of details and controls, the factors affecting audit sampling being audit risk, audit objectives and population\\'s characteristics.

  18. Evolution Acceptance and Epistemological Beliefs of College Biology Students

    Science.gov (United States)

    Borgerding, Lisa A.; Deniz, Hasan; Anderson, Elizabeth Shevock

    2017-01-01

    Evolutionary theory is central to biology, and scientifically accurate evolution instruction is promoted within national and state standards documents. Previous literature has identified students' epistemological beliefs as potential predictors of evolution acceptance. The present work seeks to explore more directly how student views of evolution…

  19. Students get wise about AIDS - The acceptability, feasibility and ...

    African Journals Online (AJOL)

    Objectives. The study assessed the acceptability and feasibility of an AIDS education programme for South African high-school students. Design, setting and sUbjects. A 'before-after' study was conducted in a suburban high school in Cape Town. All 232 standard 8 students were included, and were exposed to the ...

  20. Blues fans and suicide acceptability.

    Science.gov (United States)

    Stack, S

    2000-01-01

    Research has neglected the possible impact of the blues music subculture on suicide acceptability (SA). The sad themes in the blues may attract suicidal persons and reinforce their suicidal moods and attitudes. The present study performs the first test of the thesis that associates SA with being a blues fan. It uses data on a national sample of 961 adults drawn from the General Social Survey of 1993. The results of a multivariate logistic regression analysis found that blues fans were no more accepting of suicide than nonfans. However, blues fanship was found to have substantial indirect effects on SA through its influence on such factors as lowered religiosity levels, the most important predictor of SA. Race-specific analyses found more support for the model for whites than for African Americans.

  1. Accepting the T3D

    Energy Technology Data Exchange (ETDEWEB)

    Rich, D.O.; Pope, S.C.; DeLapp, J.G.

    1994-10-01

    In April, a 128 PE Cray T3D was installed at Los Alamos National Laboratory`s Advanced Computing Laboratory as part of the DOE`s High-Performance Parallel Processor Program (H4P). In conjunction with CRI, the authors implemented a 30 day acceptance test. The test was constructed in part to help them understand the strengths and weaknesses of the T3D. In this paper, they briefly describe the H4P and its goals. They discuss the design and implementation of the T3D acceptance test and detail issues that arose during the test. They conclude with a set of system requirements that must be addressed as the T3D system evolves.

  2. Wide-Gap Chalcopyrites

    CERN Document Server

    Siebentritt, Susanne

    2006-01-01

    Chalcopyrites, in particular those with a wide band gap, are fascinating materials in terms of their technological potential in the next generation of thin-film solar cells and in terms of their basic material properties. They exhibit uniquely low defect formation energies, leading to unusual doping and phase behavior and to extremely benign grain boundaries. This book collects articles on a number of those basic material properties of wide-gap chalcopyrites, comparing them to their low-gap cousins. They explore the doping of the materials, the electronic structure and the transport through interfaces and grain boundaries, the formation of the electric field in a solar cell, the mechanisms and suppression of recombination, the role of inhomogeneities, and the technological role of wide-gap chalcopyrites.

  3. Acceptability of reactors in space

    Energy Technology Data Exchange (ETDEWEB)

    Buden, D.

    1981-04-01

    Reactors are the key to our future expansion into space. However, there has been some confusion in the public as to whether they are a safe and acceptable technology for use in space. The answer to these questions is explored. The US position is that when reactors are the preferred technical choice, that they can be used safely. In fact, it dies not appear that reactors add measurably to the risk associated with the Space Transportation System.

  4. World-Wide Standardized Seismograph Network: a data users guide

    Science.gov (United States)

    Peterson, Jon R.; Hutt, Charles R.

    2014-01-01

    The purpose of this report, which is based on an unpublished draft prepared in the 1970s, is to provide seismologists with the information they may need to use the WWSSN data set as it becomes available in a more easily accessible and convenient format on the Internet. The report includes a description of the WWSSN network, station facilities, operations and instrumentation, a derivation of the instrument transfer functions, tables of transfer functions, a description of calibration techniques, and a description of a method used to determine important instrument constants using recorded calibration data.

  5. Wind power: basic challenge concerning social acceptance

    NARCIS (Netherlands)

    Wolsink, M.; Meyers, R.A.

    2012-01-01

    This reference article gives an overview of social acceptance (acceptance by all relevant actors in society) of all relevant aspects of implementation and diffusion of wind power. In social acceptance three dimensions of acceptance are distinguished (socio-political -; community -; market

  6. Jihadism, Narrow and Wide

    DEFF Research Database (Denmark)

    Sedgwick, Mark

    2015-01-01

    The term “jihadism” is popular, but difficult. It has narrow senses, which are generally valuable, and wide senses, which may be misleading. This article looks at the derivation and use of “jihadism” and of related terms, at definitions provided by a number of leading scholars, and at media usage...

  7. World wide biomass resources

    NARCIS (Netherlands)

    Faaij, A.P.C.

    2012-01-01

    In a wide variety of scenarios, policy strategies, and studies that address the future world energy demand and the reduction of greenhouse gas emissions, biomass is considered to play a major role as renewable energy carrier. Over the past decades, the modern use of biomass has increased

  8. Standard NIM Instrumentation System

    Energy Technology Data Exchange (ETDEWEB)

    Costrell, Louis [National Inst. of Standards and Technology (NIST), Gaithersburg, MD (United States); Lenkszus, Frank R. [Argonne National Lab. (ANL), Argonne, IL (United States); Rudnick, Stanley J. [Argonne National Lab. (ANL), Argonne, IL (United States); Davey, Eric [Atomic Energy of Canada (AECL), Limited, Chalk River, ON (Canada); Gould, John [Brookhaven National Lab. (BNL), Upton, NY (United States); Rankowitz, Seymour [Brookhaven National Lab. (BNL), Upton, NY (United States); Sims, William P. [Brookhaven National Lab. (BNL), Upton, NY (United States); Whitney, R. Roy [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States). Continuous Electron Beam Accelerator Facility (CEBAF); Dobinson, Robert W. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Verweij, Henk [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Latner, Norman [Environmental Measurements Lab., New York, NY (United States); Negro, Vincent C. [Environmental Measurements Lab., New York, NY (United States); Barsotti, Edward J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Droege, Thomas E. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Kerns, Cordon [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Turner, Kathleen J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Downing, Robert W. [Univ. of Illinois, Urbana, IL (United States); Kirsten, Frederick A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Larsh, A. E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Loken, Stewart C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mack, Dick A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wagner, Lee J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lucena, Robert C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); O' Brien, Dennis W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gjovig, Allan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Naivar, Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nelson, Ronald O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); White, D. Hywell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Akerlof, Carl [Univ. of Michigan, Ann Arbor, MI (United States); Stilwell, Donald E. [National Aeronautics and Space Administration, Washington, DC (United States); Trainor, James H. [National Aeronautics and Space Administration, Washington, DC (United States); Gobbi, Bruno [Northwestern Univ., Evanston, IL (United States); Biggerstaff, John A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hill, Nat W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schulze, Gerald K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gustavson, David B. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Horelick, Dale [SLAC National Accelerator Lab., Menlo Park, CA (United States); Kunz, Paul F. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Paffrath, Leo [SLAC National Accelerator Lab., Menlo Park, CA (United States); Walz, Helmut V. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Dawson, W. Kenneth [TRIUMF, Vancouver, BC (Canada); Cresswell, John [TRIUMF, Vancouver, BC (Canada); Dhawan, Satish [Yale Univ., New Haven, CT (United States); Gingell, Charles E. L. [Yale Univ., New Haven, CT (United States)

    1990-05-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID-20893 (Rev 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice.

  9. Standard NIM instrumentation system

    CERN Document Server

    1990-01-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID- 20893 (Rev 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice.

  10. Acceptance threshold theory can explain occurrence of homosexual behaviour.

    Science.gov (United States)

    Engel, Katharina C; Männer, Lisa; Ayasse, Manfred; Steiger, Sandra

    2015-01-01

    Same-sex sexual behaviour (SSB) has been documented in a wide range of animals, but its evolutionary causes are not well understood. Here, we investigated SSB in the light of Reeve's acceptance threshold theory. When recognition is not error-proof, the acceptance threshold used by males to recognize potential mating partners should be flexibly adjusted to maximize the fitness pay-off between the costs of erroneously accepting males and the benefits of accepting females. By manipulating male burying beetles' search time for females and their reproductive potential, we influenced their perceived costs of making an acceptance or rejection error. As predicted, when the costs of rejecting females increased, males exhibited more permissive discrimination decisions and showed high levels of SSB; when the costs of accepting males increased, males were more restrictive and showed low levels of SSB. Our results support the idea that in animal species, in which the recognition cues of females and males overlap to a certain degree, SSB is a consequence of an adaptive discrimination strategy to avoid the costs of making rejection errors. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  11. DOE standard: Firearms safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements.

  12. Wind energy and social acceptability; Energie eolienne et acceptability sociale

    Energy Technology Data Exchange (ETDEWEB)

    Feurtey, E. (ed.)

    2008-07-01

    This document was prepared as part of a decentralized collaboration between Quebec and France to share knowledge regarding strategies and best practices in wind power development. It reviewed the social acceptance of Quebec's wind power industry, particularly at the municipal level. The wind industry is growing rapidly in Quebec, and this growth has generated many reactions ranging from positive to negative. The purpose of this joint effort was to describe decision making steps to developing a wind turbine array. The history of wind development in Quebec was discussed along with the various hardware components required in a wind turbine and different types of installations. The key element in implementing wind turbine arrays is to establish public acceptance of the project, followed by a good regulatory framework to define the roles and responsibilities of participants. The production of electricity from wind turbines constitutes a clean and renewable source of energy. Although it is associated with a reduction in greenhouse gas emissions, this form of energy can also have negative environmental impacts, including noise. The revenues generated by wind parks are important factors in the decision making process. Two case studies in Quebec were presented. refs., tabs., figs.

  13. Developing a standardized healthcare cost data warehouse.

    Science.gov (United States)

    Visscher, Sue L; Naessens, James M; Yawn, Barbara P; Reinalda, Megan S; Anderson, Stephanie S; Borah, Bijan J

    2017-06-12

    Research addressing value in healthcare requires a measure of cost. While there are many sources and types of cost data, each has strengths and weaknesses. Many researchers appear to create study-specific cost datasets, but the explanations of their costing methodologies are not always clear, causing their results to be difficult to interpret. Our solution, described in this paper, was to use widely accepted costing methodologies to create a service-level, standardized healthcare cost data warehouse from an institutional perspective that includes all professional and hospital-billed services for our patients. The warehouse is based on a National Institutes of Research-funded research infrastructure containing the linked health records and medical care administrative data of two healthcare providers and their affiliated hospitals. Since all patients are identified in the data warehouse, their costs can be linked to other systems and databases, such as electronic health records, tumor registries, and disease or treatment registries. We describe the two institutions' administrative source data; the reference files, which include Medicare fee schedules and cost reports; the process of creating standardized costs; and the warehouse structure. The costing algorithm can create inflation-adjusted standardized costs at the service line level for defined study cohorts on request. The resulting standardized costs contained in the data warehouse can be used to create detailed, bottom-up analyses of professional and facility costs of procedures, medical conditions, and patient care cycles without revealing business-sensitive information. After its creation, a standardized cost data warehouse is relatively easy to maintain and can be expanded to include data from other providers. Individual investigators who may not have sufficient knowledge about administrative data do not have to try to create their own standardized costs on a project-by-project basis because our data

  14. International Accounting Standards/International Financial Reporting Standards versus Vietnamese Accounting Standards

    OpenAIRE

    Dinh, Thuy

    2014-01-01

    International Accounting Standards/International Financial Reporting Standards (IAS/IFRS) have increasingly achieved global acceptance in recent years. In the face of globalisation process, it is critical for Vietnam to direct its current accounting system in order to improve its competitiveness regarding financial services and capital markets on the globally coordinated market. This thesis aims at comparing IAS/IFRS and Vietnamese Accounting Standards (VAS) in terms of accounting standa...

  15. Extending the Technology Acceptance Model to Explore the Intention to Use Second Life for Enhancing Healthcare Education

    Science.gov (United States)

    Chow, Meyrick; Herold, David Kurt; Choo, Tat-Ming; Chan, Kitty

    2012-01-01

    Learners need to have good reasons to engage and accept e-learning. They need to understand that unless they do, the outcomes will be less favourable. The technology acceptance model (TAM) is the most widely recognized model addressing why users accept or reject technology. This study describes the development and evaluation of a virtual…

  16. Fast Acceptance by Common Experience

    Directory of Open Access Journals (Sweden)

    Nathan Berg

    2010-08-01

    Full Text Available Schelling (1969, 1971a,b, 1978 observed that macro-level patterns do not necessarily reflect micro-level intentions, desires or goals. In his classic model on neighborhood segregation which initiated a large and influential literature, individuals with no desire to be segregated from those who belong to other social groups nevertheless wind up clustering with their own type. Most extensions of Schelling's model have replicated this result. There is an important mismatch, however, between theory and observation, which has received relatively little attention. Whereas Schelling-inspired models typically predict large degrees of segregation starting from virtually any initial condition, the empirical literature documents considerable heterogeneity in measured levels of segregation. This paper introduces a mechanism that can produce significantly higher levels of integration and, therefore, brings predicted distributions of segregation more in line with real-world observation. As in the classic Schelling model, agents in a simulated world want to stay or move to a new location depending on the proportion of neighbors they judge to be acceptable. In contrast to the classic model, agents' classifications of their neighbors as acceptable or not depend lexicographically on recognition first and group type (e.g., ethnic stereotyping second. The FACE-recognition model nests classic Schelling: When agents have no recognition memory, judgments about the acceptability of a prospective neighbor rely solely on his or her group type (as in the Schelling model. A very small amount of recognition memory, however, eventually leads to different classifications that, in turn, produce dramatic macro-level effects resulting in significantly higher levels of integration. A novel implication of the FACE-recognition model concerns the large potential impact of policy interventions that generate modest numbers of face-to-face encounters with members of other social groups.

  17. Sensory Acceptability of Squash (Cucurbita Maximain Making Ice Cream

    Directory of Open Access Journals (Sweden)

    Raymund B. Moreno

    2015-02-01

    Full Text Available - This experimental research was conducted to determine the sensory acceptability of mashed squash (Cucurbita Maxima of different proportions in making ice cream in terms of appearance, aroma, texture, taste and general acceptability. Five treatments were formulated in the study—four of which utilized mashed squash at various proportions and one treatment was used as the control variable which contains no mashed squash at all. The respondents of the study were the 20 Food Technology students and 10 faculty members of West Visayas State University Calinog Campus who were selected through random sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Six Point Hedonic Scale. The statistical tools used were the means, standard deviation, Wilcoxon Signed Rank Test. The 0.01 alpha level was used as the criterion for acceptance or rejection of the null hypothesis. The result of the study led to the conclusion that there is a significant difference that existed in the level of acceptability of mashed squash in making ice cream in terms of appearance, aroma, and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of using mashed squash in making ice cream in terms of taste and texture.

  18. Use and acceptance of long lasting insecticidal net screens for dengue prevention in Acapulco, Guerrero, Mexico.

    Science.gov (United States)

    Jones, Catrin H; Benítez-Valladares, David; Guillermo-May, Guillermo; Dzul-Manzanilla, Felipe; Che-Mendoza, Azael; Barrera-Pérez, Mario; Selem-Salas, Celia; Chablé-Santos, Juan; Sommerfeld, Johannes; Kroeger, Axel; O'Dempsey, Timothy; Medina-Barreiro, Anuar; Manrique-Saide, Pablo

    2014-08-14

    Dengue, recognized by the WHO as the most important mosquito-borne viral disease in the world, is a growing problem. Currently, the only effective way of preventing dengue is vector control. Standard methods have shown limited effect, and there have been calls to develop new integrated vector management approaches. One novel tool, protecting houses with long lasting insecticidal screens on doors and windows, is being trialled in a cluster randomised controlled trial by a joint UADY/WHO TDR/IDRC study in various districts of Acapulco, Mexico, with exceptionally high levels of crime and insecurity.This study investigated the community's perspectives of long lasting insecticidal screens on doors and windows in homes and in schools, in order to ascertain their acceptability, to identify challenges to further implementation and opportunities for future improvements. This was a sequential mixed-methods study. The quantitative arm contained a satisfaction survey administered to 288 houses that had received the intervention examining their perspectives of both the intervention and dengue prevention in general. The qualitative arm consisted of Focus Group Discussions (FGDs) with those who had accepted the intervention and key informant interviews with: schoolteachers to discuss the use of the screens in schools, program staff, and community members who had refused the intervention. Overall satisfaction and acceptance of the screens was very high, with only some operational and technical complaints relating to screen fragility and the installation process. However, the wider social context of urban violence and insecurity was a major barrier to screen acceptance. Lack of information dissemination and community collaboration were identified as project weaknesses. The screens are widely accepted by the population, but the project implementation could be improved by reassuring the community of its legitimacy in the context of insecurity. More community engagement and better

  19. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Science.gov (United States)

    Konak, Abdullah; Kulturel-Konak, Sadan; Nasereddin, Mahdi; Bartolacci, Michael R.

    2017-01-01

    Aim/Purpose: This paper utilizes the Technology Acceptance Model (TAM) to examine the extent to which acceptance of Remote Virtual Computer Laboratories (RVCLs) is affected by students' technological backgrounds and the role of collaborative work. Background: RVCLs are widely used in information technology and cyber security education to provide…

  20. Investigating Acceptance toward Mobile Learning to Assist Individual Knowledge Management: Based on Activity Theory Approach

    Science.gov (United States)

    Liaw, Shu-Sheng; Hatala, Marek; Huang, Hsiu-Mei

    2010-01-01

    Mobile devices could facilitate human interaction and access to knowledge resources anytime and anywhere. With respect to wide application possibilities of mobile learning, investigating learners' acceptance towards it is an essential issue. Based on activity theory approach, this research explores positive factors for the acceptance of m-learning…

  1. AWARE Wide Field View

    Science.gov (United States)

    2016-04-29

    RGB colors to the standard sRGB to allow spectrally consistent colors on monitors for viewing . Finally, the images from each sensor are corrected based ...on the exposure time used and the calibrated sensitivity of each image sensor, again based on the flat field calibration, to allow viewing of imagery...prediction is scaled based on available bandwidth and the computational resources of the cluster. In addition to the interface described in the

  2. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  3. Widely Accepted Modern Views of Cell Structure are Fundamentally Correct: A Reply to Hillman and Sartory.

    Science.gov (United States)

    Michell, R. H.; And Others

    1982-01-01

    Argues against Hillman and Sartory's views of cell structure (EJ242880), pointing out that they are erroneous in their analysis of the motives and working methods of the scientific community, in their total rejection of information coming from electron microscopy, and in their claim that lysosomes and endoplasmic reticulum are imaginary. (DC)

  4. From Widely Accepted Concepts in Coordination Chemistry to Inverted Ligand Fields.

    Science.gov (United States)

    Hoffmann, Roald; Alvarez, Santiago; Mealli, Carlo; Falceto, Andrés; Cahill, Thomas J; Zeng, Tao; Manca, Gabriele

    2016-07-27

    We begin with a brief historical review of the development of our understanding of the normal ordering of nd orbitals of a transition metal interacting with ligands, the most common cases being three below two in an octahedral environment, two below three in tetrahedral coordination, and four below one in a square-planar environment. From the molecular orbital construction of these ligand field splittings evolves a strategy for inverting the normal order: the obvious way to achieve this is to raise the ligand levels above the metal d's; that is, make the ligands better Lewis bases. However, things are not so simple, for such metal/ligand level placement may lead to redox processes. For 18-electron octahedral complexes one can create the inverted situation, but it manifests itself in the makeup of valence orbitals (are they mainly on metal or ligands?) rather than energy. One can also see the effect, in small ways, in tetrahedral Zn(II) complexes. We construct several examples of inverted ligand field systems with a hypothetical but not unrealistic AlCH3 ligand and sketch the consequences of inversion on reactivity. Special attention is paid to the square-planar case, exemplified by [Cu(CF3)4](-), in which Snyder had the foresight to see a case of an inverted field, with the empty valence orbital being primarily ligand centered, the dx2-y2 orbital heavily occupied, in what would normally be called a Cu(III) complex. For [Cu(CF3)4](-) we provide theoretical evidence from electron distributions, geometry of the ligands, thermochemistry of molecule formation, and the energetics of abstraction of a CF3 ligand by a base, all consistent with oxidation of the ligands in this molecule. In [Cu(CF3)4](-), and perhaps more complexes on the right side of the transition series than one has imagined, some ligands are σ-noninnocent. Exploration of inverted ligand fields helps us see the continuous, borderless transition from transition metal to main group bonding. We also give voice to a friendly disagreement on oxidation states in these remarkable molecules.

  5. Acceptance of Others, Feeling of Being Accepted and Striving for Being Accepted Among the Representatives of Different Kinds of Occupations

    Directory of Open Access Journals (Sweden)

    Gergana Stanoeva

    2012-05-01

    Full Text Available This paper deals with an important issue related to the human attitudes and needs in interpersonal and professional aspects. The theoretical part deals with several psychological components of the self-esteem and esteem of the others – acceptance of the others, feeling of being accepted, need for approval. Some gender differences in manifestations of acceptance and feeling of being accepted at the workplace are discussed. This article presents some empirical data for the degree of acceptance of others, feeling of being accepted and the strive for being accepted among the representatives of helping, pedagogical, administrative and economic occupations, as well as non-qualified workers. The goals of the study were to reveal the interdependency between these constructs and to be found some significant differences between the representatives of the four groups of occupations. The methods of the first study were W. Fey’s scales “Acceptance of others”, and “How do I feel accepted by others”. The method of the second study was Crown and Marlowe Scale for Social Desirability. The results indicated some significant differences in acceptance of others and feeling of being accepted between the non-qualified workers and the representatives of helping, administrative and economic occupations. There were not any significant difference in strive for being accepted between the fouroccupational groups.

  6. A change of course: The importance to DoD of international standards for electronic commerce

    Science.gov (United States)

    Payne, Judith E.

    1991-12-01

    The U.S. Department of Defense (DoD) is committed to using electronic commerce in the future with the over 300,000 vendors interested in doing business with DoD. Electronic commerce will move DoD from a paper-based world to one based on electronic transactions enabled by the exchange of formatted, electronic messages referred to as electronic data interchange (EDI). With electronic commerce, DoD plans to reduce costs, increase effectiveness, and make it easier for vendors to deal with DoD. Benefits from electronic commerce are enhanced when many businesses use the same standards for EDI messages themselves and their transmission. The fewer standards used, the less time and resources must be spent translating messages and agreeing on how to use different standards. To enhance benefits and smooth the transition to electronic commerce for itself and its vendors, DoD has chosen to use the widely accepted American National Standards Institute (ANSI) X12 standards for EDI messages, coupled with international standards for delivering messages and organizing addresses. In the past 18 months, EDI standards sponsored by a United Nations body and serving the same purpose as ANSI X12 message standards have begun to gain wider acceptance internationally.

  7. Re-Framing the World Wide Web

    Science.gov (United States)

    Black, August

    2011-01-01

    The research presented in this dissertation studies and describes how technical standards, protocols, and application programming interfaces (APIs) shape the aesthetic, functional, and affective nature of our most dominant mode of online communication, the World Wide Web (WWW). I examine the politically charged and contentious battle over browser…

  8. User acceptance of mobile notifications

    CERN Document Server

    Westermann, Tilo

    2017-01-01

    This book presents an alternative approach to studying smartphone-app user notifications. It starts with insights into user acceptance of mobile notifications in order to provide tools to support users in managing these. It extends previous research by investigating factors that influence users’ perception of notifications and proposes tools addressing the shortcomings of current systems. It presents a technical framework and testbed as an approach for evaluating the usage of mobile applications and notifications, and then discusses a series of studies based on this framework that investigate factors influencing users’ perceptions of mobile notifications. Lastly, a set of design guidelines for the usage of mobile notifications is derived that can be employed to support users in handling notifications on smartphones.

  9. Telesurgery. Acceptability of compressed video for remote surgical proctoring.

    Science.gov (United States)

    Hiatt, J R; Shabot, M M; Phillips, E H; Haines, R F; Grant, T L

    1996-04-01

    To determine the clinical acceptability of various levels of video compression for remote proctoring of laparoscopic surgical procedures. Observational, controlled study. Community-based teaching hospital. Physician and nurse observers. Controlled surgical video scenes were subjected to various levels of data compression for digital transmission and display and shown to participant observers. Clinical acceptability of video scenes after application of video compression. Clinically acceptable video compression was achieved with a 1.25-megabit/second data rate, with the use of odd-screen 43.3:1 Joint Photographic Expert Group compression and a small screen for remote viewing. With proper video compression, remote proctoring of laparoscopic procedures may be performed with standard 1.5-megabit/second telecommunication data lines and services.

  10. Credit in Acceptance Sampling on Attributes

    NARCIS (Netherlands)

    Klaassen, Chris A.J.

    2000-01-01

    Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a

  11. Older Adults' Acceptance of Information Technology

    Science.gov (United States)

    Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

    2011-01-01

    This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

  12. Wide Band Artificial Pulsar

    Science.gov (United States)

    Parsons, Zackary

    2017-01-01

    The Wide Band Artificial Pulsar (WBAP) is an instrument verification device designed and built by the National Radio Astronomy Observatory (NRAO) in Green Bank, West Virgina. The site currently operates the Green Bank Ultimate Pulsar Processing Instrument (GUPPI) and the Versatile Green Bank Astronomical Spectrometer (VEGAS) digital backends for their radio telescopes. The commissioning and continued support for these sophisticated backends has demonstrated a need for a device capable of producing an accurate artificial pulsar signal. The WBAP is designed to provide a very close approximation to an actual pulsar signal. This presentation is intended to provide an overview of the current hardware and software implementations and to also share the current results from testing using the WBAP.

  13. Accounting standards

    NARCIS (Netherlands)

    Stellinga, B.; Mügge, D.

    2014-01-01

    The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed

  14. 24 CFR 200.926c - Model code provisions for use in partially accepted code jurisdictions.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Model code provisions for use in partially accepted code jurisdictions. 200.926c Section 200.926c Housing and Urban Development Regulations... Minimum Property Standards § 200.926c Model code provisions for use in partially accepted code...

  15. Beyond Standard Model Higgs

    CERN Document Server

    AUTHOR|(CDS)2069934

    2014-01-01

    Recent LHC highlights of searches for Higgs bosons beyond the Standard Model are presented. The results by the ATLAS and CMS collaborations are based on 2011 and 2012 proton-proton collision data at centre-of-mass energies of 7 and 8 TeV, respectively. They test a wide range of theoretical models.

  16. Social Acceptance of Wind Power in the United States: Evaluating Stakeholder Perspectives (Poster)

    Energy Technology Data Exchange (ETDEWEB)

    Tegen, S.; Lantz, E.

    2009-05-01

    As the wind industry strives to achieve 20% wind energy by 2030, maintaining high levels of social acceptance for wind energy will become increasingly important. Wind Powering America is currently researching stakeholder perspectives in the U.S. market and reviewing findings from wind energy projects around the world to better understand social acceptance barriers. Results from European studies show that acceptance varies widely depending on local community values. A preliminary survey shows similar results in the United States. Further research will be conducted to refine our understanding of key social acceptance barriers and evaluate the best ways to mitigate negative perspectives on wind power.

  17. Does The UK's Community-Led Sector Need To Accept Providing Housing Properties For 'market Rent'?

    National Research Council Canada - National Science Library

    Martin Field

    2013-01-01

    ... rental housing 'offer'. It notes also the readiness to accept 'market rent' as the standard cost benchmark at which property will be occupied, and what this means for the costs of new housing and residential provisions...

  18. Evaluation of sensory acceptability and storage stability of frozen carrot based dessert

    National Research Council Canada - National Science Library

    Saxena, Tanushree Maity; Raju, P S; Bawa, A S

    In the present study a recipe for frozen carrot based dessert (carrot halwa) was standardized on the basis of sensory characteristics such as appearance, odor, texture, taste and overall acceptability (OAA...

  19. Societal acceptance of unnecessary evacuation

    Science.gov (United States)

    McCaughey, Jamie W.; Mundzir, Ibnu; Patt, Anthony; Rosemary, Rizanna; Safrina, Lely; Mahdi, Saiful; Daly, Patrick

    2017-04-01

    Uncertainties in forecasting extreme events force an unavoidable tradeoff between false alarms and misses. The appropriate balance depends on the level of societal acceptance of unnecessary evacuations, but there has been little empirical research on this. Intuitively it may seem that an unnecessary evacuation would make people less likely to evacuate again in the future, but our study finds no support for this intuition. Using new quantitative (n=800) and qualitative evidence, we examine individual- and household-level evacuation decisions in response to the strong 11-Apr-2012 earthquake in Aceh, Indonesia. This earthquake did not produce a tsunami, but the population had previously experienced the devastating 2004 tsunami. In our sample, the vast majority of people (86%) evacuated in the 2012 earthquake, and nearly all (94%) say they would evacuate again if a similar earthquake happened in the future. Self-reported level of fear at the moment of the 2012 earthquake explains more of the variance in evacuation decisions and intentions than does a combination of perceived tsunami risk and perceived efficacy of evacuation modeled on protection motivation theory. These findings suggest that the appropriate balance between false alarms and misses may be highly context-specific. Investigating this in each context would make an important contribution to the effectiveness of early-warning systems.

  20. Acceptability of GM foods among Pakistani consumers.

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  1. 77 FR 202 - Federal Acquisition Regulation; Updated Financial Accounting Standards Board Accounting References

    Science.gov (United States)

    2012-01-03

    ... 9000-AM00 Federal Acquisition Regulation; Updated Financial Accounting Standards Board Accounting... accounting standards owing to the Financial Accounting Standards Board's Accounting Standards Codification of Generally Accepted Accounting Principles. DATES: Effective Date: February 2, 2012. FOR FURTHER INFORMATION...

  2. Standard guide for evaluating and qualifying oilfield and refinery corrosion inhibitors in the laboratory

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions. 1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation. 1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide. 1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

  3. Standard dilution analysis.

    Science.gov (United States)

    Jones, Willis B; Donati, George L; Calloway, Clifton P; Jones, Bradley T

    2015-02-17

    Standard dilution analysis (SDA) is a novel calibration method that may be applied to most instrumental techniques that will accept liquid samples and are capable of monitoring two wavelengths simultaneously. It combines the traditional methods of standard additions and internal standards. Therefore, it simultaneously corrects for matrix effects and for fluctuations due to changes in sample size, orientation, or instrumental parameters. SDA requires only 200 s per sample with inductively coupled plasma optical emission spectrometry (ICP OES). Neither the preparation of a series of standard solutions nor the construction of a universal calibration graph is required. The analysis is performed by combining two solutions in a single container: the first containing 50% sample and 50% standard mixture; the second containing 50% sample and 50% solvent. Data are collected in real time as the first solution is diluted by the second one. The results are used to prepare a plot of the analyte-to-internal standard signal ratio on the y-axis versus the inverse of the internal standard concentration on the x-axis. The analyte concentration in the sample is determined from the ratio of the slope and intercept of that plot. The method has been applied to the determination of FD&C dye Blue No. 1 in mouthwash by molecular absorption spectrometry and to the determination of eight metals in mouthwash, wine, cola, nitric acid, and water by ICP OES. Both the accuracy and precision for SDA are better than those observed for the external calibration, standard additions, and internal standard methods using ICP OES.

  4. Semantically enabling a genome-wide association study database

    Directory of Open Access Journals (Sweden)

    Beck Tim

    2012-12-01

    Full Text Available Abstract Background The amount of data generated from genome-wide association studies (GWAS has grown rapidly, but considerations for GWAS phenotype data reuse and interchange have not kept pace. This impacts on the work of GWAS Central – a free and open access resource for the advanced querying and comparison of summary-level genetic association data. The benefits of employing ontologies for standardising and structuring data are widely accepted. The complex spectrum of observed human phenotypes (and traits, and the requirement for cross-species phenotype comparisons, calls for reflection on the most appropriate solution for the organisation of human phenotype data. The Semantic Web provides standards for the possibility of further integration of GWAS data and the ability to contribute to the web of Linked Data. Results A pragmatic consideration when applying phenotype ontologies to GWAS data is the ability to retrieve all data, at the most granular level possible, from querying a single ontology graph. We found the Medical Subject Headings (MeSH terminology suitable for describing all traits (diseases and medical signs and symptoms at various levels of granularity and the Human Phenotype Ontology (HPO most suitable for describing phenotypic abnormalities (medical signs and symptoms at the most granular level. Diseases within MeSH are mapped to HPO to infer the phenotypic abnormalities associated with diseases. Building on the rich semantic phenotype annotation layer, we are able to make cross-species phenotype comparisons and publish a core subset of GWAS data as RDF nanopublications. Conclusions We present a methodology for applying phenotype annotations to a comprehensive genome-wide association dataset and for ensuring compatibility with the Semantic Web. The annotations are used to assist with cross-species genotype and phenotype comparisons. However, further processing and deconstructions of terms may be required to facilitate automatic

  5. The standard for portfolio management

    CERN Document Server

    2017-01-01

    The Standard for Portfolio Management – Fourth Edition has been updated to best reflect the current state of portfolio management. It describe the principles that drive accepted good portfolio management practices in today’s organizations. It also expands the description of portfolio management to reflect its relation to organizational project management and the organization.

  6. Wheat products as acceptable substitutes for rice.

    Science.gov (United States)

    Yu, B H; Kies, C

    1993-07-01

    The objective of the study was to compare the acceptability to semi-trained US American and Asian palatability panelist, of four wheat products processed to be possible replacers of rice in human diets. Products evaluated using rice as the control standard of excellence were steamed whole wheat, couscous (steamed, extracted wheat flour semolina), rosamarina (rice shaped, extracted wheat flour pasta), and bulgar (steamed, pre-cooked partly debranned, cracked wheat). Using a ten point hedonic rating scale, both groups of panelists gave rosamarina closely followed by couscous, most favorable ratings although these ratings were somewhat lower than that of the positive control, steamed polished rice. Bulgar wheat was given the lowest evaluation and was, in general, found to be an unacceptable replacement for rice by both American and Asian judges because of its dark, 'greasy' color and distinctive flavor. In their personal dietaries, judges included rice from 0.25 to 18 times per week with the Asian judges consuming rice significantly more times per week than did the American judges (10.8 +/- 4.71 vs 1.75 +/- 1.65, p < 0.01). However, rice consumption patterns, nationality, race, or sex of the judges was not demonstrated to affect scoring of the wheat products as rice replacers.

  7. 2013 SYR Accepted Poster Abstracts.

    Science.gov (United States)

    2013-01-01

    SYR 2013 Accepted Poster abstracts: 1. Benefits of Yoga as a Wellness Practice in a Veterans Affairs (VA) Health Care Setting: If You Build It, Will They Come? 2. Yoga-based Psychotherapy Group With Urban Youth Exposed to Trauma. 3. Embodied Health: The Effects of a Mind�Body Course for Medical Students. 4. Interoceptive Awareness and Vegetable Intake After a Yoga and Stress Management Intervention. 5. Yoga Reduces Performance Anxiety in Adolescent Musicians. 6. Designing and Implementing a Therapeutic Yoga Program for Older Women With Knee Osteoarthritis. 7. Yoga and Life Skills Eating Disorder Prevention Among 5th Grade Females: A Controlled Trial. 8. A Randomized, Controlled Trial Comparing the Impact of Yoga and Physical Education on the Emotional and Behavioral Functioning of Middle School Children. 9. Feasibility of a Multisite, Community based Randomized Study of Yoga and Wellness Education for Women With Breast Cancer Undergoing Chemotherapy. 10. A Delphi Study for the Development of Protocol Guidelines for Yoga Interventions in Mental Health. 11. Impact Investigation of Breathwalk Daily Practice: Canada�India Collaborative Study. 12. Yoga Improves Distress, Fatigue, and Insomnia in Older Veteran Cancer Survivors: Results of a Pilot Study. 13. Assessment of Kundalini Mantra and Meditation as an Adjunctive Treatment With Mental Health Consumers. 14. Kundalini Yoga Therapy Versus Cognitive Behavior Therapy for Generalized Anxiety Disorder and Co-Occurring Mood Disorder. 15. Baseline Differences in Women Versus Men Initiating Yoga Programs to Aid Smoking Cessation: Quitting in Balance Versus QuitStrong. 16. Pranayam Practice: Impact on Focus and Everyday Life of Work and Relationships. 17. Participation in a Tailored Yoga Program is Associated With Improved Physical Health in Persons With Arthritis. 18. Effects of Yoga on Blood Pressure: Systematic Review and Meta-analysis. 19. A Quasi-experimental Trial of a Yoga based Intervention to Reduce Stress and

  8. Communications standards

    CERN Document Server

    Stokes, A V

    1986-01-01

    Communications Standards deals with the standardization of computer communication networks. This book examines the types of local area networks (LANs) that have been developed and looks at some of the relevant protocols in more detail. The work of Project 802 is briefly discussed, along with a protocol which has developed from one of the LAN standards and is now a de facto standard in one particular area, namely the Manufacturing Automation Protocol (MAP). Factors that affect the usage of networks, such as network management and security, are also considered. This book is divided into three se

  9. Wide-Bandgap Semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Chinthavali, M.S.

    2005-11-22

    With the increase in demand for more efficient, higher-power, and higher-temperature operation of power converters, design engineers face the challenge of increasing the efficiency and power density of converters [1, 2]. Development in power semiconductors is vital for achieving the design goals set by the industry. Silicon (Si) power devices have reached their theoretical limits in terms of higher-temperature and higher-power operation by virtue of the physical properties of the material. To overcome these limitations, research has focused on wide-bandgap materials such as silicon carbide (SiC), gallium nitride (GaN), and diamond because of their superior material advantages such as large bandgap, high thermal conductivity, and high critical breakdown field strength. Diamond is the ultimate material for power devices because of its greater than tenfold improvement in electrical properties compared with silicon; however, it is more suited for higher-voltage (grid level) higher-power applications based on the intrinsic properties of the material [3]. GaN and SiC power devices have similar performance improvements over Si power devices. GaN performs only slightly better than SiC. Both SiC and GaN have processing issues that need to be resolved before they can seriously challenge Si power devices; however, SiC is at a more technically advanced stage than GaN. SiC is considered to be the best transition material for future power devices before high-power diamond device technology matures. Since SiC power devices have lower losses than Si devices, SiC-based power converters are more efficient. With the high-temperature operation capability of SiC, thermal management requirements are reduced; therefore, a smaller heat sink would be sufficient. In addition, since SiC power devices can be switched at higher frequencies, smaller passive components are required in power converters. Smaller heat sinks and passive components result in higher-power-density power converters

  10. Design sensitivity and statistical power in acceptability judgment experiments

    Directory of Open Access Journals (Sweden)

    Jon Sprouse

    2017-02-01

    Full Text Available Previous investigations into the validity of acceptability judgment data have focused almost exclusively on 'type I errors '(or false positives because of the consequences of such errors for syntactic theories (Sprouse & Almeida 2012; Sprouse et al. 2013. The current study complements these previous studies by systematically investigating the 'type II error rate '(false negatives, or equivalently, the 'statistical power', of a wide cross-section of possible acceptability judgment experiments. Though type II errors have historically been assumed to be less costly than type I errors, the dynamics of scientific publishing mean that high type II error rates (i.e., studies with low statistical power can lead to increases in type I error rates in a given field of study. We present a set of experiments and resampling simulations to estimate statistical power for four tasks (forced-choice, Likert scale, magnitude estimation, and yes-no, 50 effect sizes instantiated by real phenomena, sample sizes from 5 to 100 participants, and two approaches to statistical analysis (null hypothesis and Bayesian. Our goals are twofold (i to provide a fuller picture of the status of acceptability judgment data in syntax, and (ii to provide detailed information that syntacticians can use to design and evaluate the sensitivity of acceptability judgment experiments in their own research.

  11. Preparing to Accept Research Data: Creating Guidelines for Librarians

    Directory of Open Access Journals (Sweden)

    Laura B. Palumbo

    2015-11-01

    Full Text Available Rutgers University Libraries have recognized the need to expand their current research data services into a well-documented and well-supported service available to the Rutgers research community. In 2005, Rutgers University Libraries created RUcore, Rutgers University Community Repository, which has served as the University’s formal repository for institutional scholarship, special collections, and Electronic Theses & Dissertations. With the impetus of the 2010 NSF directive for research data sharing and preservation, RUcore development was extended to accept research data content. Ingest of pilot data projects began in 2010 via a librarian-mediated process. In order to provide a better defined workflow and mission for research data services, in July 2014, the Rutgers University Librarian organized a Task Force to investigate the evaluation process for technical, legal, and confidential issues involved in research data acceptance, and to establish an administrative and evaluation framework for the deposit of research data. After a review of 35 repositories using 34 criteria, the Task Force drafted a plan for research data acceptance which proposes wide-spread acceptance of mediated data projects, and prepares for future self-deposit in an online interface. This paper will discuss the issues addressed by the Task Force; acknowledging ownership of data through an institutional data policy, preventing exposure of confidential or sensitive data, establishing a reconfigured data team, requirements for storage capacity and funding, creating a workflow which includes collaboration with research offices, and offering guidance for both researchers and librarians working with research data.

  12. Consumer attitudes and olive oil acceptance: The potential consumer

    Directory of Open Access Journals (Sweden)

    McEwan, Jean A.

    1994-04-01

    Full Text Available       This paper outlines the results of consumer research to investigate consumer attitudes towards olive oil, and to evaluate selected experimental samples for acceptability.
          Consumer focus group discussions were used to investigate consumer attitudes to and awareness of olive oil, in relation to other culinary oils. A wide range of information was obtained, indicating the increasing importance of olive oil in the UK.
           Product use was examined to investigate the different types of olive oils consumers use, and the importance of different attributes for purchase. Price, quality and colour were the most important considerations for purchasing an olive oil, whilst package design, package material and brand were the least important.       Eight samples of virgin olive oil were evaluated for acceptability of appearance, odour, flavour and mouthfeel. These data indicated clear differences in acceptability between the samples, particularly on flavour, mouthfeel and overall acceptability. These data were then linked to sensory information to determine the characteristics of oil associated with liking for the product.

  13. 78 FR 30747 - Reliability Standards for Geomagnetic Disturbances

    Science.gov (United States)

    2013-05-23

    ... the First Stage GMD Reliability Standards. 12. The NOPR proposed to accept aspects of the ``Initial...-specific factors, such as geography, geology, and system topology, identified in the Reliability Standards...

  14. The Psychological Health Benefits of Accepting Negative Emotions and Thoughts: Laboratory, Diary, and Longitudinal Evidence.

    Science.gov (United States)

    Ford, Brett Q; Lam, Phoebe; John, Oliver P; Mauss, Iris B

    2017-07-13

    Individuals differ in the degree to which they tend to habitually accept their emotions and thoughts without judging them-a process here referred to as habitual acceptance. Acceptance has been linked with greater psychological health, which we propose may be due to the role acceptance plays in negative emotional responses to stressors: acceptance helps keep individuals from reacting to-and thus exacerbating-their negative mental experiences. Over time, experiencing lower negative emotion should promote psychological health. To test these hypotheses, Study 1 (N = 1,003) verified that habitually accepting mental experiences broadly predicted psychological health (psychological well-being, life satisfaction, and depressive and anxiety symptoms), even when controlling for potentially related constructs (reappraisal, rumination, and other mindfulness facets including observing, describing, acting with awareness, and nonreactivity). Next, in a laboratory study (Study 2, N = 156), habitual acceptance predicted lower negative (but not positive) emotional responses to a standardized stressor. Finally, in a longitudinal design (Study 3, N = 222), acceptance predicted lower negative (but not positive) emotion experienced during daily stressors that, in turn, accounted for the link between acceptance and psychological health 6 months later. This link between acceptance and psychological health was unique to accepting mental experiences and was not observed for accepting situations. Additionally, we ruled out potential confounding effects of gender, ethnicity, socioeconomic status, and life stress severity. Overall, these results suggest that individuals who accept rather than judge their mental experiences may attain better psychological health, in part because acceptance helps them experience less negative emotion in response to stressors. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  15. Non-standard antennas

    CERN Document Server

    Le Chevalier, Francois; Staraj, Robert

    2013-01-01

    This book aims at describing the wide variety of new technologies and concepts of non-standard antenna systems - reconfigurable, integrated, terahertz, deformable, ultra-wideband, using metamaterials, or MEMS,  etc, and how they open the way to a wide range of applications, from personal security and communications to multifunction radars and towed sonars, or satellite navigation systems, with space-time diversity on transmit and receive. A reference book for designers  in this lively scientific community linking antenna experts and signal processing engineers.

  16. Public Acceptance for Geological CO2-Storage

    Science.gov (United States)

    Schilling, F.; Ossing, F.; Würdemann, H.; Co2SINK Team

    2009-04-01

    Public acceptance is one of the fundamental prerequisites for geological CO2 storage. In highly populated areas like central Europe, especially in the vicinity of metropolitan areas like Berlin, underground operations are in the focus of the people living next to the site, the media, and politics. To gain acceptance, all these groups - the people in the neighbourhood, journalists, and authorities - need to be confident of the security of the planned storage operation as well as the long term security of storage. A very important point is to show that the technical risks of CO2 storage can be managed with the help of a proper short and long term monitoring concept, as well as appropriate mitigation technologies e.g adequate abandonment procedures for leaking wells. To better explain the possible risks examples for leakage scenarios help the public to assess and to accept the technical risks of CO2 storage. At Ketzin we tried the following approach that can be summed up on the basis: Always tell the truth! This might be self-evident but it has to be stressed that credibility is of vital importance. Suspiciousness and distrust are best friends of fear. Undefined fear seems to be the major risk in public acceptance of geological CO2-storage. Misinformation and missing communication further enhance the denial of geological CO2 storage. When we started to plan and establish the Ketzin storage site, we ensured a forward directed communication. Offensive information activities, an information centre on site, active media politics and open information about the activities taking place are basics. Some of the measures were: - information of the competent authorities through meetings (mayor, governmental authorities) - information of the local public, e.g. hearings (while also inviting local, regional and nation wide media) - we always treated the local people and press first! - organizing of bigger events to inform the public on site, e.g. start of drilling activities (open

  17. Use of risk aversion in risk acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    Griesmeyer, J. M.; Simpson, M.; Okrent, D.

    1980-06-01

    Quantitative risk acceptance criteria for technological systems must be both justifiable, based upon societal values and objectives, and workable in the sense that compliance is possible and can be demonstrated in a straightforward manner. Societal values have frequently been assessed using recorded accident statistics on a wide range of human activities assuming that the statistics in some way reflect societal preferences, or by psychometric surveys concerning perceptions and evaluations of risk. Both methods indicate a societal aversion to risk e.g., many small accidents killing a total of 100 people are preferred over one large accident in which 100 lives are lost. Some of the implications of incorporating risk aversion in acceptance criteria are discussed. Calculated risks of various technological systems are converted to expected social costs using various risk aversion factors. The uncertainties in these assessments are also discussed.

  18. Individual differences in saccharin acceptance predict rats' food intake.

    Science.gov (United States)

    Boakes, Robert A; Martire, Sarah I; Rooney, Kieron B; Kendig, Michael D

    2016-10-01

    Following previous results indicating that low acceptance of saccharin-sweetened yoghurt was associated with slower weight gain, the aim of this experiment was to determine which of three measures of individual differences would predict subsequent chow consumption, body weight gain, and fat mass. Pre-test measures consisted of amount of running in an activity wheel, amount of 0.1% saccharin solution consumed over 24h, and performance on an elevated plus maze (EPM). Rats were then maintained for three weeks on a diet of standard chow and water. Subsequent post-testing repeated the procedures used in pre-testing. The rats were then culled and fat pads excised and weighed. Pre-testing revealed a negative correlation between saccharin acceptance and activity, while neither measure correlated with anxiety in the EPM. Pre-test saccharin acceptance was positively correlated with subsequent chow consumption, percent weight gain, and g/kg fat mass. Multiple regression analyses including all three pre-test measures confirmed saccharin acceptance as a predictor of chow consumption and, marginally, of fat pad mass, while high anxiety predicted low percent body weight gain. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Nanoparticle standards

    Energy Technology Data Exchange (ETDEWEB)

    Havrilla, George Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-08

    We will purchase a COTS materials printer and adapt it for solution printing of known elemental concentration solutions. A methodology will be developed to create deposits of known mass in known locations on selected substrates. The deposits will be characterized for deposited mass, physical morphology, thickness and uniformity. Once an acceptable methodology has been developed and validated, we will create round robin samples to be characterized by LGSIMS instruments at LANL, PNNL and NIST. We will demonstrate the feasibility of depositing nanoparticles in known masses with the goal of creating separated nanoparticles in known locations.

  20. (Terminology standardization)

    Energy Technology Data Exchange (ETDEWEB)

    Strehlow, R.A.

    1990-10-19

    Terminological requirements in information management was but one of the principal themes of the 2nd Congress on Terminology and Knowledge Engineering. The traveler represented the American Society for Testing and Materials' Committee on Terminology, of which he is the Chair. The traveler's invited workshop emphasized terminology standardization requirements in databases of material properties as well as practical terminology standardizing methods. The congress included six workshops in addition to approximately 82 lectures and papers from terminologists, artificial intelligence practitioners, and subject specialists from 18 countries. There were approximately 292 registrants from 33 countries who participated in the congress. The congress topics were broad. Examples were the increasing use of International Standards Organization (ISO) Standards in legislated systems such as the USSR Automated Data Bank of Standardized Terminology, the enhanced Physics Training Program based on terminology standardization in Physics in the Chinese province of Inner Mongolia, and the technical concept dictionary being developed at the Japan Electronic Dictionary Research Institute, which is considered to be the key to advanced artificial intelligence applications. The more usual roles of terminology work in the areas of machine translation. indexing protocols, knowledge theory, and data transfer in several subject specialties were also addressed, along with numerous special language terminology areas.

  1. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    Energy Technology Data Exchange (ETDEWEB)

    NNSA/NSO Waste Management Project

    2008-06-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  2. Mindfulness, Acceptance and Catastrophizing in Chronic Pain

    NARCIS (Netherlands)

    de Boer, Maaike J.; Steinhagen, Hannemike E.; Versteegen, Gerbrig J.; Struys, Michel M. R. F.; Sanderman, Robbert

    2014-01-01

    Objectives: Catastrophizing is often the primary target of the cognitive-behavioral treatment of chronic pain. Recent literature on acceptance and commitment therapy (ACT) suggests an important role in the pain experience for the concepts mindfulness and acceptance. The aim of this study is to

  3. Client acceptance decisions of Dutch auditing partners

    NARCIS (Netherlands)

    Wittek, Rafael; Zee, Theo van der; Mühlau, Peter

    2008-01-01

    A vignette study of 567 client acceptance decisions by 67 Dutch auditors showed that the prospect of acquiring additional assignments significantly increases the likelihood that auditing partners accept an audit assignment from a new client, thereby violating a rule of the auditing profession. Audit

  4. Perceptions of acceptable conducts by university students

    Directory of Open Access Journals (Sweden)

    Dora Nazaré Marques

    2016-07-01

    Conclusion: Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take action.

  5. Genres Across Cultures: Types of Acceptability Variation

    Science.gov (United States)

    Shaw, Philip; Gillaerts, Paul; Jacobs, Everett; Palermo, Ofelia; Shinohara, Midori; Verckens, J. Piet

    2004-01-01

    One can ask four questions about genre validity across cultures. Does a certain form or configuration occur in the culture in question? Is it acceptable? If acceptable, is it in practice preferred? Is it recommended by prescriptive authorities? This paper reports the results of an attempt to answer these questions empirically by testing the…

  6. Accept & Reject Statement-Based Uncertainty Models

    NARCIS (Netherlands)

    E. Quaeghebeur (Erik); G. de Cooman; F. Hermans (Felienne)

    2015-01-01

    textabstractWe develop a framework for modelling and reasoning with uncertainty based on accept and reject statements about gambles. It generalises the frameworks found in the literature based on statements of acceptability, desirability, or favourability and clarifies their relative position. Next

  7. Mindfulness, acceptance and catastrophizing in chronic pain.

    Directory of Open Access Journals (Sweden)

    Maaike J de Boer

    Full Text Available OBJECTIVES: Catastrophizing is often the primary target of the cognitive-behavioral treatment of chronic pain. Recent literature on acceptance and commitment therapy (ACT suggests an important role in the pain experience for the concepts mindfulness and acceptance. The aim of this study is to examine the influence of mindfulness and general psychological acceptance on pain-related catastrophizing in patients with chronic pain. METHODS: A cross-sectional survey was conducted, including 87 chronic pain patients from an academic outpatient pain center. RESULTS: The results show that general psychological acceptance (measured with the AAQ-II is a strong predictor of pain-related catastrophizing, independent of gender, age and pain intensity. Mindfulness (measured with the MAAS did not predict levels of pain-related catastrophizing. DISCUSSION: Acceptance of psychological experiences outside of pain itself is related to catastrophizing. Thus, acceptance seems to play a role in the pain experience and should be part of the treatment of chronic pain. The focus of the ACT treatment of chronic pain does not necessarily have to be on acceptance of pain per se, but may be aimed at acceptance of unwanted experiences in general. Mindfulness in the sense of "acting with awareness" is however not related to catastrophizing. Based on our research findings in comparisons with those of other authors, we recommend a broader conceptualization of mindfulness and the use of a multifaceted questionnaire for mindfulness instead of the unidimensional MAAS.

  8. Mindfulness, acceptance and catastrophizing in chronic pain.

    Science.gov (United States)

    de Boer, Maaike J; Steinhagen, Hannemike E; Versteegen, Gerbrig J; Struys, Michel M R F; Sanderman, Robbert

    2014-01-01

    Catastrophizing is often the primary target of the cognitive-behavioral treatment of chronic pain. Recent literature on acceptance and commitment therapy (ACT) suggests an important role in the pain experience for the concepts mindfulness and acceptance. The aim of this study is to examine the influence of mindfulness and general psychological acceptance on pain-related catastrophizing in patients with chronic pain. A cross-sectional survey was conducted, including 87 chronic pain patients from an academic outpatient pain center. The results show that general psychological acceptance (measured with the AAQ-II) is a strong predictor of pain-related catastrophizing, independent of gender, age and pain intensity. Mindfulness (measured with the MAAS) did not predict levels of pain-related catastrophizing. Acceptance of psychological experiences outside of pain itself is related to catastrophizing. Thus, acceptance seems to play a role in the pain experience and should be part of the treatment of chronic pain. The focus of the ACT treatment of chronic pain does not necessarily have to be on acceptance of pain per se, but may be aimed at acceptance of unwanted experiences in general. Mindfulness in the sense of "acting with awareness" is however not related to catastrophizing. Based on our research findings in comparisons with those of other authors, we recommend a broader conceptualization of mindfulness and the use of a multifaceted questionnaire for mindfulness instead of the unidimensional MAAS.

  9. Catastrophic injury in rugby union: is the level of risk acceptable?

    Science.gov (United States)

    Fuller, Colin W

    2008-01-01

    Rugby union is a full contact sport with a relatively high overall risk of injury and a small specific risk of fatal and catastrophic spinal injury. Although catastrophic injuries in rugby union cause public concern and generate strong emotive reactions, the magnitude of society's concern about this type of injury is often dominated by people's perceptions rather than by actual levels of risk. This article assesses published values for the risk of catastrophic injuries in rugby union, evaluates these against the risk standards of the UK Health and Safety Executive (HSE) and compares the values with the risks associated with other common sport and non-sport activities. The assessment showed that the risks of sustaining a catastrophic injury in rugby union in England (0.8/100,000 per year), Ireland (0.9/100,000 per year) and Argentina (1.9/100,000 per year) were within the HSE's 'acceptable' region of risk (0.1-2/100,000 per year), whilst the risks in New Zealand (4.2/100,000 per year), Australia (4.4/100,000 per year) and Fiji (13/100,000 per year) were within the 'tolerable' region of risk (2-100/100,000 per year). The risk of sustaining a catastrophic injury in rugby union was generally lower than or comparable with the levels reported for a wide range of other collision sports, such as ice hockey (4/100,000 per year), rugby league (2/100,000 per year) and American Football (2/100,000 per year). In addition, the risk of catastrophic injury in rugby union was comparable with that experienced by most people in work-based situations and lower than that experienced by motorcyclists, pedestrians and car occupants. Whilst ranking risks provides an effective way of assessing their acceptability, it is recognized that representing risks by a single risk value can be misleading, as account must also be taken of the public's perception of the risks and the inherent differences in the types of risk being considered. However, an acceptable level of risk is often regarded as

  10. Effects of prebehavioral cognitive work on adolescents' acceptance of condoms.

    Science.gov (United States)

    Winter, L; Goldy, A S

    1993-07-01

    Two educational strategies designed to promote condom use for sexually transmitted disease protection were tested in a field experiment involving 291 female, adolescent family planning clinic clients. The 1st strategy was designed to enhance attitude-behavior correspondence by increasing direct experience with handling condoms. The 2nd, a contingency-planning exercise, induced clients to generate a mental representation of negotiating condom use with a sexual partner. Both strategies were compared with the standard education. The dependent measures were condom acceptance (operationalized by the number of condoms taken), attitudes, and knowledge. Clients in the contingency-planning condition accepted about 60% more condoms than did other clients. Condom attitudes followed the same pattern, and knowledge did not differ among conditions.

  11. Coping with loss of ability vs. acceptance of disease in women after breast cancer treatment.

    Science.gov (United States)

    Cieślak, Katarzyna; Golusiński, Wojciech

    2017-01-01

    To answer the question: is there a correlation between copying with the loss of ability and the acceptance of disease? The loss of ability is the beginning of a process of dealing with a widely understood dysfunction and its consequences. This happens owing to the lifting of the barriers that emerged due to the loss of ability and through the acquisition of skills that help an individual find their way in the new reality. The study included 90 patients with history of breast cancer. They were divided into two groups- I: up to five years from diagnosis, II: more than five years from diagnosis. The study was conducted using the Questionnaire on Coping With Ability Loss by P. Wolski, Acceptance of Illness Scale - B.J. Felton, T.A. Revenson, G.A. Hinrichsen, adapted by: Z. Juczyński. Group I: it is positive weak correlation, meaning that the higher level of acceptance in the QCAL test, the higher acceptance of illness. Group II: there is no relation between acceptance of illness and the QCAL test acceptance scale and no relation between depression and the level of acceptance. The more depressed a patient is and the less successful they are in dealing with the loss of ability, the lower their level of acceptance of illness. On the other hand, in time, it is struggle with the disability that plays more important role in the acceptance of the disease than the impact of negative emotions.

  12. Cultural Technology Acceptance Model for Consumers’ Acceptance of Arabic E-Commerce Websites

    OpenAIRE

    Omar (Mohammad Ali) Al-Qudah; Kamsuriah Ahmad

    2014-01-01

    The aim of this study is to identify the factors affecting consumer’s acceptance of Arabic e-commerce websites and to propose a cultural technology acceptance model for consumer’s acceptance of Arabic e-commerce websites. The proposed model was built based on, technology acceptance model, trust, perceived risk and Hofstede’s cultural values as moderators between trust and perceived risk and purchase intention. In addition, Arabic language from literature review was added. Based on these theor...

  13. Effects of two different post-surgical protocols including either 0.05 % chlorhexidine herbal extract or 0.1 % chlorhexidine on post-surgical plaque control, early wound healing and patient acceptance following standard periodontal surgery and implant placement.

    Science.gov (United States)

    Laugisch, Oliver; Ramseier, Christoph A; Salvi, Giovanni E; Hägi, Tobias T; Bürgin, Walter; Eick, Sigrun; Sculean, Anton

    2016-11-01

    The aim of this study was to compare early wound healing, tooth staining and patient acceptance with two different post-surgical maintenance protocols. Forty patients scheduled for flap surgery to treat periodontal pockets or accommodate dental implants were randomly assigned to receive the following two different post-surgical maintenance protocols: (a) 2 weeks rinsing with a 0.05 % chlorhexidine digluconate (CHX)/herbal extract combination (test) or (b) a 0.1 % CHX solution (control). Early wound healing was evaluated clinically and immunologically. Tooth staining and patient acceptance were assessed by means of visual analogue scale (VAS). Both groups presented with comparable wound healing profiles. No statistically significant differences were observed between the two protocols regarding early wound healing and plaque index (p > 0.05). However, in the control group, statistically significantly more patients felt discomfort due to tooth staining (p = 0.0467). Compared with patients from the test group, patients in the control group reported statistically significant more irritation of taste at week 1 (p = 0.0359) and at week 2 (p = 0.0042). The present findings indicate that the two CHX protocols resulted in comparable healing and inhibition of plaque formation. Tooth staining and subjective discomfort related to irritation of taste were more frequent in the control group. A post-operative protocol including 0.05 % CHX/herbal extract may have the potential to improve patient compliance during post-operative maintenance.

  14. Frequency standards

    CERN Document Server

    Riehle, Fritz

    2006-01-01

    Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency.This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards

  15. Approaches to acceptable risk: a critical guide

    Energy Technology Data Exchange (ETDEWEB)

    Fischhoff, B.; Lichtenstein, S.; Slovic, P.; Keeney, R.; Derby, S.

    1980-12-01

    Acceptable-risk decisions are an essential step in the management of technological hazards. In many situations, they constitute the weak (or missing) link in the management process. The absence of an adequate decision-making methodology often produces indecision, inconsistency, and dissatisfaction. The result is neither good for hazard management nor good for society. This report offers a critical analysis of the viability of various approaches as guides to acceptable-risk decisions. This report seeks to define acceptable-risk decisions and to examine some frequently proposed, but inappropriate, solutions. 255 refs., 22 figs., 25 tabs.

  16. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    Energy Technology Data Exchange (ETDEWEB)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-07-01

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal.

  17. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2016-01-01

    International e-Customs is going through a standardization process. Driven by the need to increase control in the trade process to address security challenges stemming from threats of terrorists, diseases, and counterfeit products, and to lower the administrative burdens on traders to stay...

  18. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2014-01-01

    International e-Customs is going through a standardization process. Driven by the need to increase control in the trade process to address security challenges stemming from threats of terrorists, diseases, and counterfeit products, and to lower the administrative burdens on traders to stay...

  19. PKI standards

    OpenAIRE

    Mitchell, Chris J

    2000-01-01

    This paper provides a review of the current state of the art in standards for Public Key Infrastructures. The main focus of the paper is the recent work by the Internet Engineering Task Force, ITU-T, and ISO/IEC.

  20. Nevada Test Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy, Nevada Operations Office, Waste Acceptance Criteria

    1999-05-01

    This document provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal; and transuranic and transuranic mixed waste for interim storage at the Nevada Test Site.

  1. Integrated Model for E-Learning Acceptance

    Science.gov (United States)

    Ramadiani; Rodziah, A.; Hasan, S. M.; Rusli, A.; Noraini, C.

    2016-01-01

    E-learning is not going to work if the system is not used in accordance with user needs. User Interface is very important to encourage using the application. Many theories had discuss about user interface usability evaluation and technology acceptance separately, actually why we do not make it correlation between interface usability evaluation and user acceptance to enhance e-learning process. Therefore, the evaluation model for e-learning interface acceptance is considered important to investigate. The aim of this study is to propose the integrated e-learning user interface acceptance evaluation model. This model was combined some theories of e-learning interface measurement such as, user learning style, usability evaluation, and the user benefit. We formulated in constructive questionnaires which were shared at 125 English Language School (ELS) students. This research statistics used Structural Equation Model using LISREL v8.80 and MANOVA analysis.

  2. 24 CFR 7.34 - Acceptability.

    Science.gov (United States)

    2010-04-01

    ..., Color Religion, Sex, National Origin, Age, Disability or Reprisal Complaints § 7.34 Acceptability. (a... complaint system. (d) Where the Director of EEO believes that some, but not all, of the claims in a...

  3. ADHD knowledge, misconceptions, and treatment acceptability.

    Science.gov (United States)

    Sciutto, Mark J

    2015-02-01

    Despite the availability of several effective treatments, many children with ADHD do not receive adequate services. A variety of factors may influence help-seeking behavior among families of children with ADHD. This study explores two factors that may influence help-seeking decisions: knowledge and misconceptions of ADHD and treatment acceptability. A total of 196 participants completed measures of ADHD knowledge and use of information sources prior to rating the acceptability of two interventions: stimulant medication and sugar elimination diets. Higher levels of ADHD misconceptions were associated with lower acceptance of medication and higher acceptance of dietary interventions. However, analysis of individual misconceptions suggests that specific misconceptions are differentially related to perceptions of individual treatments. It may be important for clinicians to assess and deliberately target specific misconceptions as part of treatment for ADHD. © 2013 SAGE Publications.

  4. User Acceptance of Picture Archiving and Communication System in the Emergency Department

    Science.gov (United States)

    Goodarzi, Hassan; Khatami, Seyed-Masoud; Javadzadeh, Hammidreza; Mahmoudi, Sadrollah; Khajehpour, Hojjatollah; Heidari, Soleiman; Khodaparast, Morteza; Ebrahimi, Ali; Rasouli, Hamidreza; Ghane, Mohammadreza; Faraji, Mehrdad; Hassanpour, Kasra

    2016-01-01

    Background Picture archiving and communication system (PACS) has allowed the medical images to be transmitted, stored, retrieved, and displayed in different locations of a hospital or health system. Using PACS in the emergency department will eventually result in improved efficiency and patient care. In spite of the abundant benefits of employing PACS, there are some challenges in implementing this technology like users’ resistance to accept the technology, which has a critical role in PACS success. Objectives In this study, we will assess and compare user acceptance of PACS in the emergency departments of three different hospitals and investigate the effect of socio-demographic factors on this acceptance. Materials and Methods A variant of technology acceptance model (TAM) has been used in order to measure the acceptance level of PACS in the emergency department of three educational hospitals in Iran. A previously used questionnaire was validated and utilized to collect the study data. A stepwise multiple regression model was used to predict factors influencing acceptance score as the dependent variable. Results Mean age of participants was 32.9 years (standard deviation [SD] = 6.08). Participants with the specialty degree got a higher acceptance score than the three other groups (Mean ± SD = 4.17 ± 0.20). Age, gender, degree of PACS usage and participant’s occupation (profession) did not influence the acceptance score. In our multiple regression model, all three variables of perceived usefulness (PU), perceived ease of use (PEU) and the effect of PACS (change) had a significant effect in the prediction of acceptance. The most influencing factor was change with the beta of 0.22 (P value < 0.001). Conclusion PACS is highly accepted in all three emergency departments especially among specialists. PU, PEU and change are factors influencing PACS acceptance. Our study can be used as an evidence of PACS acceptance in emergency wards. PMID:27679692

  5. Consumer acceptance of food crops developed by genome editing.

    Science.gov (United States)

    Ishii, Tetsuya; Araki, Motoko

    2016-07-01

    One of the major problems regarding consumer acceptance of genetically modified organisms (GMOs) is the possibility that their transgenes could have adverse effects on the environment and/or human health. Genome editing, represented by the CRISPR/Cas9 system, can efficiently achieve transgene-free gene modifications and is anticipated to generate a wide spectrum of plants. However, the public attitude against GMOs suggests that people will initially be unlikely to accept these plants. We herein explored the bottlenecks of consumer acceptance of transgene-free food crops developed by genome editing and made some recommendations. People should not pursue a zero-risk bias regarding such crops. Developers are encouraged to produce cultivars with a trait that would satisfy consumer needs. Moreover, they should carefully investigate off-target mutations in resultant plants and initially refrain from agricultural use of multiplex genome editing for better risk-benefit communication. The government must consider their regulatory status and establish appropriate regulations if necessary. The government also should foster communication between the public and developers. If people are informed of the benefits of genome editing-mediated plant breeding and trust in the relevant regulations, and if careful risk-benefit communication and sincere considerations for the right to know approach are guaranteed, then such transgene-free crops could gradually be integrated into society.

  6. Perceptions of acceptable conducts by university students.

    Science.gov (United States)

    Marques, Dora Nazaré; Macedo, António Filipe

    2016-01-01

    To determine perceptions of acceptable conducts amongst under and postgraduate optometry students and to compare them with students from other disciplines. Students (under/postgraduate) of optometry (n=156) and other courses (n=54) from University of Minho participated in a voluntary online questionnaire about perception of conducts, classifying as acceptable or unacceptable 15 academic or professional scenarios. 210 questionnaires were analyzed. Differences in perceptions were found between optometry under and postgraduates in scenario 5, Chi-square(2,156)=4.3, p=0.038, and scenario 7, Chi-square(2,156)=7.0, p=0.008 (both with cheating more acceptable for postgrads). Differences between under and postgraduates from other courses were found in scenario 9 (taking supplies from classroom more acceptable for undergrads), Chi-square(1,54)=5.0, p=0.025, and scenario 14 (forging a signature more acceptable for postgrads), Chi-square(1,54)=3.9, p=0.046. Differences between optometry and other courses undergraduates were observed in scenario 2 (plagiarism more acceptable for optometry undergrads), Chi-square(1,154)=8.3, p=0.004 and scenario 9 (taking supplies from classroom more acceptable for other undergrads), chi-square(1,54)=7.8, p=0.005. Differences between optometry and other courses postgraduates were observed in scenario 7, Chi-square(1,56)=5.8, p=0.016, scenario 10 (both with cheating more acceptable for optometry postgrads), chi-square(1,54)=8.1, p=0.004 and scenario 14 (forging a signature more acceptable for other postgrads), Chi-square(1,54)=6.1, p=0.026. Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take

  7. Consumer acceptance of ginseng food products.

    Science.gov (United States)

    Chung, Hee Sook; Lee, Young-Chul; Rhee, Young Kyung; Lee, Soo-Yeun

    2011-01-01

    Ginseng has been utilized less in food products than in dietary supplements in the United States. Sensory acceptance of ginseng food products by U.S. consumers has not been reported. The objectives of this study were to: (1) determine the sensory acceptance of commercial ginseng food products and (2) assess influence of the addition of sweeteners to ginseng tea and ginseng extract to chocolate on consumer acceptance. Total of 126 consumers participated in 3 sessions for (1) 7 commercial red ginseng food products, (2) 10 ginseng teas varying in levels of sugar or honey, and (3) 10 ginseng milk or dark chocolates varying in levels of ginseng extract. Ginseng candy with vitamin C and ginseng crunchy white chocolate were the most highly accepted, while sliced ginseng root product was the least accepted among the seven commercial products. Sensory acceptance increased in proportion to the content of sugar and honey in ginseng tea, whereas acceptance decreased with increasing content of ginseng extract in milk and dark chocolates. Findings demonstrate that ginseng food product types with which consumers have been already familiar, such as candy and chocolate, will have potential for success in the U.S. market. Chocolate could be suggested as a food matrix into which ginseng can be incorporated, as containing more bioactive compounds than ginseng tea at a similar acceptance level. Future research may include a descriptive analysis with ginseng-based products to identify the key drivers of liking and disliking for successful new product development. © 2011 Institute of Food Technologists®

  8. Key factors of teenagers' mobile advertising acceptance

    OpenAIRE

    Martí Parreño, José; Sanz Blas, Silvia; Ruiz Mafé, Carla; Aldás Manzano, Joaquín

    2013-01-01

    Purpose – The purpose of this paper is to analyse key drivers of teenagers’ attitude toward mobile advertising and its effects on teenagers’ mobile advertising acceptance. Design/methodology/approach – A proposed model of affective (irritation and entertainment) and cognitive (perceived usefulness) antecedents of attitude toward mobile advertising and its effects on mobile advertising acceptance is analysed. The sample consisted of 355 Spanish teenagers. The model was tested us...

  9. Standard guide for computed radiography

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide provides general tutorial information regarding the fundamental and physical principles of computed radiography (CR), definitions and terminology required to understand the basic CR process. An introduction to some of the limitations that are typically encountered during the establishment of techniques and basic image processing methods are also provided. This guide does not provide specific techniques or acceptance criteria for specific end-user inspection applications. Information presented within this guide may be useful in conjunction with those standards of 1.2. 1.2 CR techniques for general inspection applications may be found in Practice E2033. Technical qualification attributes for CR systems may be found in Practice E2445. Criteria for classification of CR system technical performance levels may be found in Practice E2446. Reference Images Standards E2422, E2660, and E2669 contain digital reference acceptance illustrations. 1.3 The values stated in SI units are to be regarded as the st...

  10. Risk perceptions, risk attitudes and the formation of consumer acceptance of Genetically Modified (GM) food

    OpenAIRE

    Costa Font, Montserrat; Gil Roig, José María

    2009-01-01

    The influence of risk perception and risk attitudes in the process of accepting genetically modified (GM) food is often ignored, and particularly whether both constructs (latent variables) have a combined effect in explaining consumer acceptance. Similarly, the inclusion of organic product standards juxtaposed to GM food is unknown. This paper attempts to shed some light on this question by examining the decision making process through the use of structural equation modeling (SEM). We use sur...

  11. Data converters for wireless standards

    CERN Document Server

    Shi, Chunlei

    2002-01-01

    Wireless communication is witnessing tremendous growth with proliferation of different standards covering wide, local and personal area networks (WAN, LAN and PAN). The trends call for designs that allow 1) smooth migration to future generations of wireless standards with higher data rates for multimedia applications, 2) convergence of wireless services allowing access to different standards from the same wireless device, 3) inter-continental roaming. This requires designs that work across multiple wireless standards, can easily be reused, achieve maximum hardware share at a minimum power consumption levels particularly for mobile battery-operated devices.

  12. Global Standards of Market Civilization

    DEFF Research Database (Denmark)

    Global Standards of Market Civilization brings together leading scholars, representing a range of political views, to investigate how global 'standards of market civilization' have emerged, their justification, and their political, economic and social impact. Key chapters show how as the modern......, economic and social impact. Civilization is a term widely used within modern political discourse its meaning, yet it is poorly understood and misused. part I explores the idea of a ‘standard of civilization', its implications for governance, and the use of such standards in political theory and economic...

  13. Pornography, public acceptance and sex related crime: a review.

    Science.gov (United States)

    Diamond, Milton

    2009-01-01

    A vocal segment of the population has serious concerns about the effect of pornography in society and challenges its public use and acceptance. This manuscript reviews the major issues associated with the availability of sexually explicit material. It has been found everywhere it was scientifically investigated that as pornography has increased in availability, sex crimes have either decreased or not increased. It is further been found that sexual erotica has not only wide spread personal acceptance and use but general tolerance for its availability to adults. This attitude is seen by both men and women and not only in urban communities but also in reputed conservative ones as well. Further this finding holds nationally in the United States and in widely different countries around the world. Indeed, no country where this matter has been scientifically studied has yet been found to think pornography ought be restricted from adults. The only consistent finding is that adults prefer to have the material restricted from children's production or use.

  14. Determination of standard molar Gibbs free energy of formation of Bi{sub 2}O{sub 3} over a wide temperature range by EMF method[Liquid bismuth; Solid electrolyte; Bi2O3; EMF cells; RuO2 electrode; Gibbs free energy of formation

    Energy Technology Data Exchange (ETDEWEB)

    Ganesan, Rajesh; Gnanasekaran, T. E-mail: gnani@igcar.ernet.in; Srinivasa, Raman S

    2003-10-01

    The EMF of the following galvanic cells (W,Bi,Bi{sub 2}O{sub 3}|CSZ|O{sub 2} (1 atm),RuO{sub 2},Pt))(W,Bi,Bi{sub 2}O{sub 3}|CSZ|O{sub 2} (1 atm),Pt))were measured over a wide range of temperature (572 to 1127) K. With O{sub 2} (1 atm) reference and RuO{sub 2} as the electrode material with Pt as electrical lead, measurements were possible at temperatures close to the melting temperature of Bi. Standard Gibbs free energies of formation, {delta}{sub f}G{sup 0}{sub m} of Bi{sub 2}O{sub 3}(s) (both {alpha} and {delta} phases) and Bi{sub 2}O{sub 3}(l) were calculated from the emf measurements and are given by the following expressions:({delta}{sub f}G{sup 0}{sub m}<{alpha}-Bi{sub 2}O{sub 3}>{+-}0.3 kJ{center_dot}mol{sup -1}=-583.4+0.2938T/K (572{<=}T{<=}988 K),))({delta}{sub f}G{sup 0}{sub m}<{delta}-Bi{sub 2}O{sub 3}>{+-}0.4 kJ{center_dot}mol{sup -1}=-543.8+0.2538T/K (988{<=}T{<=}1098 K),))({delta}{sub f}G{sup 0}{sub m}{l_brace}Bi{sub 2}O{sub 3}{r_brace}{+-}0.3. kJ{center_dot}mol{sup -1}=-492.4+0.2070T/K (1098{<=}T{<=}1127 K).))A third law treatment of the data yielded a value of -568.4 {+-} 0.5 kJ {center_dot} mol{sup -1} for the enthalpy of formation of Bi{sub 2}O{sub 3}(s) at T=298.15 K, {delta}{sub f}H{sup 0}{sub m,298.15K}<{alpha}-Bi{sub 2}O{sub 3}>, which is in good agreement with the second law estimate of -570.8 {+-} 0.3 kJ {center_dot} mol{sup -1}.

  15. Acceptance and storage of fresh cheese made with essential oils

    Directory of Open Access Journals (Sweden)

    Joelmir Grassi Presente

    2017-08-01

    Full Text Available The aim of this work was to evaluate the acceptance and conservation of Minas fresh cheese with essential oils added of oregano and ginger in its formulation. The quality of the milk used as raw material was evaluated for pH, acidity, alizarol, total solids, density, and total microbial load. The cheeses produced were characterized as pH, acidity, moisture, lipids, proteins and ashes. The cheeses were also evaluated by sensorial affective tests using hedonic and attitude scales, in order to determine the acceptance and purchase intention by judges. The count of total aerobic mesophilic microorganisms was used to estimate the shelf-life of cheeses. The milk used as raw material is presented within the quality standards required by legislation. The cheeses made with essential oils showed pH and acidity around 6.9 and 0.87%, respectively, 57.6% moisture, 31.3% lipids, 11.4% protein and 0.9% ash. The cheese added essential oil of oregano and the control cheese were those given by the judges the best values for acceptance (7.5 and 7.6, respectively and purchase intention (4.2 and 4.4 respectively. Regarding the estimated shelf-life, the cheeses added essential oil of oregano and ginger had lower overall microbial load values compared to the control (no oil and mixed (two oils addition, presented counts values with up 106 UFC/g only from the 28th day of storage.

  16. International standards for tuberculosis care: Relevance and implications for laboratory professionals

    Directory of Open Access Journals (Sweden)

    Pai M

    2007-01-01

    Full Text Available On World Tuberculosis (TB Day 2006, the International Standards for Tuberculosis Care (ISTC was officially released and widely endorsed by several agencies and organizations. The ISTC release was the culmination of a year long global effort to develop and set internationally acceptable, evidence-based standards for tuberculosis care. The ISTC describes a widely endorsed level of care that all practitioners, public and private, should seek to achieve in managing individuals who have or are suspected of having, TB and is intended to facilitate the effective engagement of all healthcare providers in delivering high quality care for patients of all ages, including those with smear-positive, smear-negative and extra-pulmonary TB, TB caused by drug-resistant Mycobacterium tuberculosis and TB/HIV coinfection. In this article, we present the ISTC, with a special focus on the diagnostic standards and describe their implications and relevance for laboratory professionals in India and worldwide. Laboratory professionals play a critical role in ensuring that all the standards are actually met by providing high quality laboratory services for smear microscopy, culture and drug susceptibility testing and other services such as testing for HIV infection. In fact, if the ISTC is widely followed, it can be expected that there will be a greater need and demand for quality assured laboratory services and this will have obvious implications for all laboratories in terms of work load, requirement for resources and trained personnel and organization of quality assurance systems.

  17. Information technology acceptance in health information management.

    Science.gov (United States)

    Abdekhoda, M; Ahmadi, M; Dehnad, A; Hosseini, A F

    2014-01-01

    User acceptance of information technology has been a significant area of research for more than two decades in the field of information technology. This study assessed the acceptance of information technology in the context of Health Information Management (HIM) by utilizing Technology Acceptance Model (TAM) which was modified and applied to assess user acceptance of health information technology as well as viability of TAM as a research construct in the context of HIM. This was a descriptive- analytical study in which a sample of 187 personnel from a population of 363 personnel, working in medical records departments of hospitals affiliated to Tehran University of Medical Sciences, was selected. Users' perception of applying information technology was studied by a researcher-developed questionnaire. Collected data were analyzed by SPSS software (version16) using descriptive statistics and regression analysis. The results suggest that TAM is a useful construct to assess user acceptance of information technology in the context of HIM. The findings also evidenced the perceived ease of use (PEOU) and perceived usefulness (PE) were positively associated with favorable users' attitudes towards HIM. PU was relatively more associated (r= 0.22, p = 0.05) than PEOU (r = 0.014, p = 0.05) with favorable user attitudes towards HIM. Users' perception of usefulness and ease of use are important determinants providing the incentive for users to accept information technologies when the application of a successful HIM system is attempted. The findings of the present study suggest that user acceptance is a key element and should subsequently be the major concern of health organizations and health policy makers.

  18. 40 CFR Appendix Xv to Part 86 - Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test Schedule for...

    Science.gov (United States)

    2010-07-01

    ... Acceptable Exhaust Regeneration Durability-Data Test Schedule for Diesel Cycle Vehicles Equipped With... Appendix XV to Part 86—Procedure for Determining an Acceptable Exhaust Regeneration Durability-Data Test... = Total number of regeneration emission tests. (Subscript “s” refers to standard test schedule) 5. Refer...

  19. Use and acceptance of the International Study Group for Pancreatic Fistula (ISGPF) definition and criteria in the surgical literature.

    Science.gov (United States)

    Chen, Brian P; Bennett, Sean; Bertens, Kimberly A; Balaa, Fady K; Martel, Guillaume

    2018-01-01

    The level of utilization and acceptance of the 2005 International Study Group for Pancreatic Fistula (ISGPF) definition for postoperative pancreatic fistula (POPF) has not be quantified. The aim of this study was to determine the uptake of the ISGPF definition and evaluate its use in the surgical literature. A sample of primary studies, review articles, and textbooks were identified through screening of literature searches. Included citations were assessed for their definition of POPF and use of the ISGPF criteria. From 2006 to 2009, 6%-63% of primary papers were compliant with the ISGPF definition compared to 84%-98% from 2010 onwards. Of the primary studies compliant with the ISGPF criteria, 36% focused on grade B and C fistula and 15% did not report grade A fistula. 88% of European papers used the criteria compared to 77% and 72% of Asian and North American papers, respectively (p = 0.033). 46% of review articles and textbooks did not define POPF. Among those that defined POPF, 74% cited the ISGPF definition exclusively while 26% mentioned other definitions. The ISGPF criteria have been widely adopted and accepted as the standard for defining POPF, although the utility of grade A fistulas is questionable. Copyright © 2017. Published by Elsevier Ltd.

  20. Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

    Science.gov (United States)

    Wang, Xiaohui; Goh, Dion Hoe-Lian

    2017-11-01

    The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

  1. Standard deviations

    CERN Document Server

    Smith, Gary

    2015-01-01

    Did you know that having a messy room will make you racist? Or that human beings possess the ability to postpone death until after important ceremonial occasions? Or that people live three to five years longer if they have positive initials, like ACE? All of these ‘facts' have been argued with a straight face by researchers and backed up with reams of data and convincing statistics.As Nobel Prize-winning economist Ronald Coase once cynically observed, ‘If you torture data long enough, it will confess.' Lying with statistics is a time-honoured con. In Standard Deviations, ec

  2. Risk Acceptance in the Furniture Sector: Analysis of Acceptance Level and Relevant Influence Factors

    OpenAIRE

    Rodrigues, Matilde A.; P. M. Arezes; Leão, C.P.

    2015-01-01

    Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in ...

  3. Acceptance of Swedish e-health services

    Directory of Open Access Journals (Sweden)

    Mary-Louise Jung

    2010-11-01

    Full Text Available Mary-Louise Jung1, Karla Loria11Division of Industrial Marketing, e-Commerce and Logistics, Lulea University of Technology, SwedenObjective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health.Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM, in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted.Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use.Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide.Keywords: health services, elderly, technology, Internet, TAM, patient acceptance, health-seeking behavior

  4. Factors Influencing Acceptance Of Contraceptive Methods

    Directory of Open Access Journals (Sweden)

    Anita Gupta

    1997-04-01

    Full Text Available Research Problem: What are the factors influencing acceptance of contraceptive methods.Objective: To study the determinants influencing contra­ceptive acceptance.Study design: Population based cross - sectional study.Setting: Rural area of East DelhiParticipants: Married women in the reproductive age group.Sample:Stratified sampling technique was used to draw the sample.Sample Size: 328 married women of reproductive age group.Study Variables: Socio-economic status, Type of contraceptive, Family size, Male child.Outcome Variables: Acceptance of contraceptivesStatistical Analysis: By proportions.Result: Prevalence of use of contraception at the time of data collection was 40.5%. Tubectomy and vasectomy were most commonly used methods. (59.4%, n - 133. Educational status of the women positively influenced the contraceptive acceptance but income did not. Desire for more children was single most important deterrent for accepting contraception.Recommendations:(i             Traditional method of contraception should be given more attention.(ii            Couplesshould be brought in the contraceptive use net at the early stage of marriage.

  5. Who accepts responsibility for their transgressions?

    Science.gov (United States)

    Schumann, Karina; Dweck, Carol S

    2014-12-01

    After committing an offense, transgressors can optimize their chances of reconciling with the victim by accepting responsibility. However, transgressors may be motivated to avoid admitting fault because it can feel threatening to accept blame for harmful behavior. Who, then, is likely to accept responsibility for a transgression? We examined how implicit theories of personality--whether people see personality as malleable (incremental theory) or fixed (entity theory)--influence transgressors' likelihood of accepting responsibility. We argue that incremental theorists may feel less threatened by accepting responsibility because they are more likely to view the situation as an opportunity for them to grow as a person and develop their relationship with the victim. We found support for our predictions across four studies using a combination of real-world and hypothetical offenses, and correlational and experimental methods. These studies therefore identify an important individual difference factor that can lead to more effective responses from transgressors. © 2014 by the Society for Personality and Social Psychology, Inc.

  6. System Wide Information Management (SWIM)

    Science.gov (United States)

    Hritz, Mike; McGowan, Shirley; Ramos, Cal

    2004-01-01

    This viewgraph presentation lists questions regarding the implementation of System Wide Information Management (SWIM). Some of the questions concern policy issues and strategies, technology issues and strategies, or transition issues and strategies.

  7. Wide spectrum microwave pulse measurement

    Energy Technology Data Exchange (ETDEWEB)

    King, R.J.

    1986-01-01

    Various techniques are postulated as diagnostics for wide band microwave pulses. The diagnostics include determinations of both the instantaneous amplitude and the frequency content of one-shot pulses. 6 refs., 11 figs. (WRF)

  8. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    Science.gov (United States)

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

  9. Measuring Acceptance of Sleep Difficulties: The Development of the Sleep Problem Acceptance Questionnaire.

    Science.gov (United States)

    Bothelius, Kristoffer; Jernelöv, Susanna; Fredrikson, Mats; McCracken, Lance M; Kaldo, Viktor

    2015-11-01

    Acceptance may be an important therapeutic process in sleep medicine, but valid psychometric instruments measuring acceptance related to sleep difficulties are lacking. The purpose of this study was to develop a measure of acceptance in insomnia, and to examine its factor structure as well as construct validity. In a cross-sectional design, a principal component analysis for item reduction was conducted on a first sample (A) and a confirmatory factor analysis on a second sample (B). Construct validity was tested on a combined sample (C). Questionnaire items were derived from a measure of acceptance in chronic pain, and data were gathered through screening or available from pretreatment assessments in four insomnia treatment trials, administered online, via bibliotherapy and in primary care. Adults with insomnia: 372 in sample A and 215 in sample B. Sample C (n = 820) included sample A and B with another 233 participants added. Construct validity was assessed through relations with established acceptance and sleep scales. The principal component analysis presented a two-factor solution with eight items, explaining 65.9% of the total variance. The confirmatory factor analysis supported the solution. Acceptance of sleep problems was more closely related to subjective symptoms and consequences of insomnia than to diary description of sleep, or to acceptance of general private events. The Sleep Problem Acceptance Questionnaire (SPAQ), containing the subscales "Activity Engagement" and "Willingness", is a valid tool to assess acceptance of insomnia. © 2015 Associated Professional Sleep Societies, LLC.

  10. Food allergy: Stakeholder perspectives on acceptable risk

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard; Crevel, René; Chan, Chun-Han

    2010-01-01

    We have reached a point where it is difficult to improve food allergy risk management without an agreement on levels of acceptable risk. This paper presents and discusses the perspectives of the different stakeholders (allergic consumers, health professionals, public authorities and the food...... industry) on acceptable risk in food allergy. Understanding where these perspectives diverge and even conflict may help develop an approach to define what is acceptable. Uncertainty about food allergy, its consequences and how to manage them is the common denominator of the stakeholders’ views. In patients...... to all patients despite the fact that the risk to each is not identical. Regulators and the food industry struggle with the fact that the lack of management thresholds forces them to make case-by-case decisions in an area of uncertainty with penalties for under- or over-prediction. As zero risk...

  11. Improving acceptance in wind power planning

    Energy Technology Data Exchange (ETDEWEB)

    Hammarlund, K. [Lund Univ. (Sweden). Dept. of Social and Economic Geography

    1996-12-01

    This paper presents important factors and planning procedures for public acceptance of wind power. Opinion surveys in Sweden show that acceptance is connected to the concept of utility rather than the aesthetic values. If wind turbines are confined by the authorities to marginal areas, they will not earn their rightful place in the landscape by being of use. A positive attitude in general promotes a positive experience of the effects of wind turbines. It is therefore essential to establish a sense of cooperation between the project management and the public. An open dialogue and continuous information will increase the possibilities for acceptance of future development. We must establish new codes of practice in permit processing because policies today contains ideological and practical contradictions between development and preservation of landscapes. 16 refs, 2 tabs

  12. Functional food acceptance in the food chain

    DEFF Research Database (Denmark)

    Krutulyte, Rasa

    This thesis analyses consumer acceptance of functional foods and food manufacturers' decision to develop functional foods. The thesis sets up four key research questions: (1) How consumers accept functional foods enriched with omega-3? (2) How the intention of purchasing carrier ingredient...... combinations is explained by general attitudes to functional foods, consumers' health concerns, and the perceived fit of a particular carrier ingredient combination? (3) How food manufacturers decide to develop functional foods? (4) What are the determinants and drivers of food manufacturers' decision...... to develop functional foods? Research question 1 The health benefit of a functional food product is in fact limited if it is not eaten regularly and thus is not part of the healthy diet. For that reason it is highly relevant to look at the dietary change research when studying functional food acceptance...

  13. 75 FR 58016 - Consensus Standards, Standard Practice for Design, Alteration, and Certification of Airplane...

    Science.gov (United States)

    2010-09-23

    ... Certification of Airplane Electrical Wiring Systems AGENCY: Federal Aviation Administration, DOT. ACTION: Notice...-07 Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems (Standard Practice) as an acceptable means of compliance to 14 CFR part 23 sections concerning electrical...

  14. 29 CFR 96.42 - Audit standards.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Audit standards. 96.42 Section 96.42 Labor Office of the Secretary of Labor AUDIT REQUIREMENTS FOR GRANTS, CONTRACTS, AND OTHER AGREEMENTS Access to Records, Audit Standards and Relation of Organization-wide Audits to Other Audit Requirements § 96.42 Audit standards...

  15. Alignment of Test with the Standards.

    Science.gov (United States)

    Romberg, Thomas A.; Wilson, Linda D.

    1992-01-01

    Examined 6 widely used grade-8 standardized tests for content, required processes, and level to determine their alignment with the 5-8 NCTM "Curriculum and Evaluation Standards." Concluded that these tests inadequately covered the 5-8 standards. A follow-up study examined items from newly developed and foreign tests to demonstrate the…

  16. RISK ANALYSES USED IN ACCEPTANCE TESTING

    Directory of Open Access Journals (Sweden)

    Oxana STOROJ

    2016-06-01

    Full Text Available This article is talking about risk based testing approach in user acceptance testing UAT (User Acceptance Testing. There are presented definitions of risk and risk based testing. In addition, we are talking about risks that can appear during UAT and we are describing the process of testing based on risks. We propose some techniques and methods of identifying risks such as using Brainstorming, Delphi method,probability analysis method and others. Also, risk traceability matrix is presented as a method of prioritizing risks.

  17. Nevada Test Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-10-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  18. European consumers' acceptance of functional foods

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    2010-01-01

    Consumer acceptance of functional foods is analyzed from the perspective of consumer quality perception of food products. Four major dimensions of food quality are identified: taste and other sensory characteristics, healthiness, convenience, and naturalness. Functional foods provide, from...... the consumer perspective, synergies between healthiness and convenience, but may, in the consumer mind, lead to trade-offs between healthiness on the one side and taste and naturalness on the other side. This may explain the reluctance of European consumers to accept functional food products....

  19. [Could infant euthanasia be ever acceptable?].

    Science.gov (United States)

    Beca, J P; Leiva, A

    2014-10-01

    The recent enactment of a law that allows infant euthanasia in Belgium raises questions with varied answers. To contribute to a better understanding of the topic, euthanasia and legislation concepts are described. After a bioethical analysis, we propose as conclusion that children euthanasia could only be acceptable in very exceptional situations in which palliative measures have failed. The answer should be that it is not acceptable in our setting, not until we have public policies, protocols and palliative care services for terminally ill children.

  20. Acceptable Channel Switching Delays for Mobile TV

    DEFF Research Database (Denmark)

    Fleury, Alexandre; Pedersen, Jakob Schou; Larsen, Lars Bo

    2011-01-01

    This paper presents a user study investigating the acceptability of channel switching delays on mobile television systems. The authors first review the previous work in the area, then propose a study design and present results from its implementation, focusing on the overall acceptability threshold...... as well as three potential effect factors: the transition type, the test environment and the audiovisual content. The results show that delays longer than 5.7 seconds annoyed test participants, and that the transition type had a significant impact on the rating of channel switching delays. However...

  1. Standardization work

    Science.gov (United States)

    Malavallon, Olivier

    1995-04-01

    For several years now, the main civil aircraft manufacturers (Airbus and its partners, Boeing, Fokker, McDonnell Douglas) have been working jointly on the writing of technical recommendations and the drawing up of an international standard. This work concerns the evaluation of the processes and products used to strip aeronautical paint systems. This procedure was initiated on request from the main airlines. In effect, the airlines are faced with situations in which the financial and operational objectives are becoming increasingly important. The need was felt to rationalize and, if possible, harmonize the criteria and technical requirements of the various civil aircraft manufacturers in order to facilitate in-service maintenance of the fleets of airlines operating Airbus, Boeing, Douglas aircraft, etc.

  2. Measuring Acceptance of Sleep Difficulties: The Development of the Sleep Problem Acceptance Questionnaire

    Science.gov (United States)

    Bothelius, Kristoffer; Jernelöv, Susanna; Fredrikson, Mats; McCracken, Lance M.; Kaldo, Viktor

    2015-01-01

    Study Objectives: Acceptance may be an important therapeutic process in sleep medicine, but valid psychometric instruments measuring acceptance related to sleep difficulties are lacking. The purpose of this study was to develop a measure of acceptance in insomnia, and to examine its factor structure as well as construct validity. Design: In a cross-sectional design, a principal component analysis for item reduction was conducted on a first sample (A) and a confirmatory factor analysis on a second sample (B). Construct validity was tested on a combined sample (C). Setting: Questionnaire items were derived from a measure of acceptance in chronic pain, and data were gathered through screening or available from pretreatment assessments in four insomnia treatment trials, administered online, via bibliotherapy and in primary care. Participants: Adults with insomnia: 372 in sample A and 215 in sample B. Sample C (n = 820) included sample A and B with another 233 participants added. Measures: Construct validity was assessed through relations with established acceptance and sleep scales. Results: The principal component analysis presented a two-factor solution with eight items, explaining 65.9% of the total variance. The confirmatory factor analysis supported the solution. Acceptance of sleep problems was more closely related to subjective symptoms and consequences of insomnia than to diary description of sleep, or to acceptance of general private events. Conclusions: The Sleep Problem Acceptance Questionnaire (SPAQ), containing the subscales “Activity Engagement” and “Willingness”, is a valid tool to assess acceptance of insomnia. Citation: Bothelius K, Jernelöv S, Fredrikson M, McCracken LM, Kaldo V. Measuring acceptance of sleep difficulties: the development of the sleep problem acceptance questionnaire. SLEEP 2015;38(11):1815–1822. PMID:26085302

  3. Implementing healthcare information security: standards can help.

    Science.gov (United States)

    Orel, Andrej; Bernik, Igor

    2013-01-01

    Using widely spread common approaches to systems security in health dedicated controlled environments, a level of awareness, confidence and acceptance of relevant standardisation is evaluated. Patients' information is sensitive, so putting appropriate organisational techniques as well as modern technology in place to secure health information is of paramount importance. Mobile devices are becoming the top priorities in advanced information security planning with healthcare environments being no exception. There are less and less application areas in healthcare without having a need for a mobile functionality which represents an even greater information security challenge. This is also true in emergency treatments, rehabilitation and homecare just to mention a few areas outside hospital controlled environments. Unfortunately quite often traditional unsecured communications principles are still in routine use for communicating sensitive health related information. The security awareness level with users, patients and care professionals is not high enough so potential threats and risks may not be addressed and the respective information security management is therefore weak. Standards like ISO/IEC 27000 ISMS family, the ISO/IEC 27799 information security guidelines in health are often not well known, but together with legislation principles such as HIPAA, they can help.

  4. Investigating m-Health Acceptance from a Protection Motivation Theory Perspective: Gender and Age Differences.

    Science.gov (United States)

    Guo, Xitong; Han, Xiaocui; Zhang, Xiaofei; Dang, Yuanyuan; Chen, Chun

    2015-08-01

    Mobile health (m-health) services are becoming increasingly important and widely accepted. However, empirical studies on potential users' m-health acceptance behavior remain underexplored. Indeed, m-health adoption is not only a technology acceptance behavior, but also a health-related behavior. Based on the Protection Motivation Theory, this article explores users' m-health adoption behavior from the perspectives of threat appraisal and coping appraisal, and also examines the moderating role of gender and age through a survey of potential users. The survey was conducted among 500 potential m-health service participants. Our results show that threat appraisal and coping appraisal factors influence adoption intention through attitude. It is also found that gender and age play different moderating roles with threat appraisal and coping appraisal factors. Gender and age play different roles between threat appraisal and coping appraisal factors in the acceptance of m-health. Implications for research and practice are discussed.

  5. Wide-Field Plate Database

    Science.gov (United States)

    Tsvetkov, M. K.; Stavrev, K. Y.; Tsvetkova, K. P.; Semkov, E. H.; Mutatov, A. S.

    The Wide-Field Plate Database (WFPDB) and the possibilities for its application as a research tool in observational astronomy are presented. Currently the WFPDB comprises the descriptive data for 400 000 archival wide field photographic plates obtained with 77 instruments, from a total of 1 850 000 photographs stored in 269 astronomical archives all over the world since the end of last century. The WFPDB is already accessible for the astronomical community, now only in batch mode through user requests sent by e-mail. We are working on on-line interactive access to the data via INTERNET from Sofia and parallel from the Centre de Donnees Astronomiques de Strasbourg. (Initial information can be found on World Wide Web homepage URL http://www.wfpa.acad.bg.) The WFPDB may be useful in studies of a variety of astronomical objects and phenomena, andespecially for long-term investigations of variable objects and for multi-wavelength research. We have analysed the data in the WFPDB in order to derive the overall characteristics of the totality of wide-field observations, such as the sky coverage, the distributions by observation time and date, by spectral band, and by object type. We have also examined the totality of wide-field observations from point of view of their quality, availability and digitisation. The usefulness of the WFPDB is demonstrated by the results of identification and investigation of the photometrical behaviour of optical analogues of gamma-ray bursts.

  6. Monitoring device acceptance in implantable cardioverter defibrillator patients using the Florida Patient Acceptance Survey

    DEFF Research Database (Denmark)

    Versteeg, Henneke; Starrenburg, Annemieke; Denollet, Johan

    2012-01-01

    Patient device acceptance might be essential in identifying patients at risk for adverse patient-reported outcomes following implantation of an implantable cardioverter defibrillator (ICD). We examined the validity and reliability of the Florida Patient Acceptance Scale (FPAS) and identified corr...

  7. Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

    Science.gov (United States)

    Kirmizi, Özkan

    2014-01-01

    The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

  8. Gay, Lesbian, and Heterosexual Teachers: Acceptance of Self, Acceptance of Others, Affectional and Lifestyle Orientation.

    Science.gov (United States)

    Mayer, Martin

    This study was conducted to examine the employment of gay teachers. Two aspects of personality that are important characteristics for teacher effectiveness, acceptance of self and acceptance of others, are compared; and differences in identity formation and identity management in relation to these characteristics are explored. Two questionnaires…

  9. Standardization in digital pathology: Supplement 145 of the DICOM standards

    Directory of Open Access Journals (Sweden)

    Rajendra Singh

    2011-01-01

    Full Text Available As digital slides need a lot of storage space, lack of a singular method to acquire and store these large, two-dimensional images has been a major stumbling block in the universal acceptance of this technology. The DICOMS Standard Committee Working Group 26 has put in a tremendous effort to standardize storage methods so that they are more in line with currently available PACS in most hospitals for storage of radiology images. A recent press release (Supplement 145 of these standards was hailed by one and all involved in the field of digital pathology as it will make it easier for hospitals to integrate digital pathology into their already established systems without adding too much overhead costs. Besides, it will enable different vendors developing the scanners to upgrade their products to storage systems that are common across all systems.

  10. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Seung Kook [Policy Research Center, Korea Atomic Energy Research Institute (KAERI), Daejeon (Korea, Republic of); Lee, Jin Won [School of Management, Xiamen University, Xiamen (China)

    2017-08-15

    The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

  11. Differentiated influences of risk perceptions on nuclear power acceptance according to acceptance targets: Evidence from Korea

    Directory of Open Access Journals (Sweden)

    Seungkook Roh

    2017-08-01

    Full Text Available The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

  12. Parental acceptance of Human Papillomavirus vaccines.

    NARCIS (Netherlands)

    Lenselink, C.H.; Gerrits, M.M.; Melchers, W.J.G.; Massuger, L.F.A.G.; Hamont, D. van; Bekkers, R.L.M.

    2008-01-01

    OBJECTIVE: To determine whether parents would accept Human Papillomavirus (HPV) vaccination for their children and which variables may influence their decision, including knowledge about cervical cancer and HPV. STUDY DESIGN: Three hundred and fifty-six parents of children aged 10-12 years were

  13. Sweet Potato Ketchup: Feasibility, Acceptability, and Production ...

    African Journals Online (AJOL)

    Ketchup sauce is increasingly a popular condiment used as a flavouring ingredient in fast-food businesses in East African urban areas. It is one of a myriad of products that can be made using sweet potato (Ipomoea batatas) roots. We assessed the feasibility, consumer acceptability, and cost of production for a ketchup ...

  14. International Emissions Trading : Design and Political Acceptability

    NARCIS (Netherlands)

    Boom, Jan Tjeerd

    2006-01-01

    This thesis discusses the design and political acceptability of international emissions trading. It is shown that there are several designs options for emissions trading at the national level that have a different impact on output and thereby related factors such as employment and consumer prices.

  15. TOWARDS A BETTER UNDERSTANDING ORDER ACCEPTANCE

    NARCIS (Netherlands)

    TENKATE, HA

    1994-01-01

    This article concerns a comparison of two coordination mechanisms between production and sales activities. It focusses on the interaction of order acceptance and production scheduling at the operational level. The research is motivated by some major changes which have overcome the process industries

  16. The Accept-Pluralism tolerance indicators toolkit

    OpenAIRE

    Triandafyllidou, Anna; ACCEPT-PLURALISM

    2013-01-01

    Work Package 5: New Knowledge on Tolerance and Cultural Diversity in Europe The ACCEPT PLURALISM project (2010-2013) is funded by the European Commission under the Seventh Framework Programme, Socio-economic Sciences and Humanities. (Call FP7-SSH-2009-A, Grant Agreement no: 243837). Coordinator: Prof. Anna Triandafyllidou, Robert Schuman Centre for Advanced Studies, European University Institute.

  17. Educational Data Mining Acceptance among Undergraduate Students

    Science.gov (United States)

    Wook, Muslihah; Yusof, Zawiyah M.; Nazri, Mohd Zakree Ahmad

    2017-01-01

    The acceptance of Educational Data Mining (EDM) technology is on the rise due to, its ability to extract new knowledge from large amounts of students' data. This knowledge is important for educational stakeholders, such as policy makers, educators, and students themselves to enhance efficiency and achievements. However, previous studies on EDM…

  18. W-087 Acceptance test procedure. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, A.W.

    1997-06-10

    This Acceptance Test Procedure/Operational Test Procedure (ATP/OTP) has been prepared to demonstrate that the Electrical/Instrumentation and Mechanical systems function as required by project criteria and to verify proper operation of the integrated system including the interlocks.

  19. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  20. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2012-02-28

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  1. Community Acceptance of Collaboration Between Ophthalmologists ...

    African Journals Online (AJOL)

    This is a cross sectional community-based study that determined acceptability of collaboration between ophthalmologists and traditional eye care providers in Afon a rural community in Kwara state, Nigeria. The views of traditional healers and ophthalmologists were also sought. This study was conducted between March ...

  2. 7 CFR 915.25 - Acceptance.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Acceptance. 915.25 Section 915.25 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Order...

  3. Is Coersive Treatment of Offenders Morally Acceptable?

    DEFF Research Database (Denmark)

    Ryberg, Jesper

    2015-01-01

    Is it morally acceptable to instigate criminal offenders to participate in rehabilitative treatment by offering treatment in return for early release from prison? Some theorists have supported such treatment schemes by pointing to the beneficial consequences that follow from the treatment. Others...... as a penal theoretical problem, the arguments—both by proponents and critics of coercive treatment—become premature....

  4. 75 FR 44046 - Noise Exposure Map Acceptance

    Science.gov (United States)

    2010-07-27

    ... Federal Aviation Administration Noise Exposure Map Acceptance ACTION: Notice. SUMMARY: The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the... on the noise exposure maps is June 1, 2010. FOR FURTHER INFORMATION CONTACT: Edward S. Gabsewics, CEP...

  5. Acceptance of Swedish e-health services

    Science.gov (United States)

    Jung, Mary-Louise; Loria, Karla

    2010-01-01

    Objective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health. Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM), in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted. Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use. Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide. PMID:21289860

  6. Acceptance of Agri-Food Nanotechnology

    NARCIS (Netherlands)

    Gupta, Nidhi; Frewer, Lynn; Fischer, Arnout

    2017-01-01

    Food technology has evolved from being focused on the issues associated with food availability to include, more latterly, additional foci on food safety, sustainability and functionality. Despite the intuitive appeal of these beneficial factors in providing the basis for consumer acceptance of

  7. Generator acceptance test and inspection report

    Energy Technology Data Exchange (ETDEWEB)

    Johns, B.R.

    1997-07-24

    This Acceptance Test Report(ATR) is the completed testing and inspection of the new portable generator. The testing and inspection is to verify that the generator provided by the vendor meets the requirements of specification WHC-S-0252, Revision 2. Attached is various other documentation to support the inspection and testing.

  8. Monitoring Acceptance of homosexuality in the Netherlands

    NARCIS (Netherlands)

    Saskia Keuzenkamp

    2010-01-01

    Promoting acceptance of homosexuality is the main objective of current Dutch policy on the emancipation of gays and lesbians. At the request of Ronald Plasterk, the former Dutch government minister with responsibility for this policy, the Netherlands Institute for Social Research/SCP is

  9. Patients’ acceptance of corticotomy-assisted orthodontics

    Science.gov (United States)

    Zawawi, Khalid H

    2015-01-01

    Objective To study patients’ acceptance of corticotomy-assisted orthodontics as a treatment option. Methods Adult patients seeking orthodontic treatment were asked to complete two sets of questionnaires; the first set included questions about age, sex, and level of education and general questions about orthodontic treatment; and the second set was related to the corticotomy-assisted orthodontics. Before answering the corticotomy questions, a brief description of the clinical procedure was explained and photographs of an actual procedure were shown. Results A total of 150 subjects were approached and 129 (86%) agreed to answer the questionnaires (72 male and 57 female patients). Of these, only 3.1% did hear about corticotomy and 7.8% selected corticotomy instead of extraction. Fear from the surgery (53.2%) was the most frequent reason for not selecting corticotomy followed by fear from pain (36.9%). The acceptance of corticotomy between males and females was similar. No relationship was found between the level of education and prior knowledge of the procedure, P=0.857. Prior knowledge about corticotomy was not a factor in selecting it as a treatment option (P=0.556) to reduce the treatment time (P=0.427). Conclusion The acceptance of corticotomy-assisted orthodontics as a treatment option was low. Fear from the surgery was the main reason for not selecting it. The acceptance of corticotomy-assisted orthodontics was not related to patient’s level of education or sex. PMID:26316719

  10. The Acceptability of Speech with Radio Interference

    DEFF Research Database (Denmark)

    Baykaner, K.; Hummersone, H.; Mason, R.

    2014-01-01

    A listening test was conducted to investigate the acceptability of audio-on-audio interference for radio programs featuring speech as the target. Twenty-one subjects, including naïve and expert listeners, were presented with 200 randomly assigned pairs of stimuli and asked to report, for each tri...

  11. Parents' Acceptability and Health Workers' Perspectives of ...

    African Journals Online (AJOL)

    About three-fifth (59.2%) of parents had good knowledge about RTIs though majority (79.00%) were unaware of Pneumococcal Conjugate Vaccine (PCV). most parents (93.5%) were willing to accept PCV for their children but only 43.5% of them could afford to pay for the cost of the vaccine at the prevailing market price.

  12. Food allergy : Stakeholder perspectives on acceptable risk

    NARCIS (Netherlands)

    Madsen, Charlotte B.; Crevel, Rene; Chan, Chun-Han; Dubois, Anthony E. J.; DunnGalvin, Audrey; Flokstra-de Blok, Bertine M. J.; Gowland, M. Hazel; Hattersley, Sue; Hourihane, Jonathan O'B; Norhede, Pia; Pfaff, Sylvia; Rowe, Gene; Schnadt, Sabine; Vlieg-Boerstra, Berber J.

    2010-01-01

    We have reached a point where it is difficult to improve food allergy risk management without an agreement on levels of acceptable risk. This paper presents and discusses the perspectives of the different stakeholders (allergic consumers, health professionals, public authorities and the food

  13. Examining Information Technology Acceptance by Individual Professionals

    Directory of Open Access Journals (Sweden)

    Licen Indahwati Darsono

    2005-06-01

    Full Text Available The mixed results of information technology (IT investment have made the investigation of user acceptance of IT increasingly challenging. A growing body of research in user acceptance of IT literature has limited focus on individual professionals as target users. Therefore, this research investigates how external variables, namely individual differences and system characteristics influence lecturers as individual professionals to accept the internet technology. Technology Acceptance Model (TAM and Theory of Planned Behavior (TPB are used as the main reference in this research. Findings of this research indicate that individual differences (computer self-efficacy, knowledge of search domain and system characteristics (terminology, screen design, relevance have indirect impact through perceived ease of use, perceived usefulness, and attitude on lecturers’ intention to use the internet. Specifically, computer self-efficacy and screen design have direct and indirect impact on intention. One issue concerning with the explanatory power of the proposed research model, which is based on TAM and TPB, compared to the rival model, which is called extended TAM, is also analyzed.

  14. Vaccine preferences and acceptance of older adults

    NARCIS (Netherlands)

    Eilers, R.; de Melker, H. E.; Veldwijk, J.; Krabbe, P. F. M.

    2017-01-01

    Background: Expanding vaccination programs for the older population might be important as older adults are becoming a larger proportion of the general population. The aim of this study is to determine the relative importance of vaccine and disease specific characteristics and acceptance for Dutch

  15. Accepting the truth: A step toward reconciliation

    Directory of Open Access Journals (Sweden)

    Ilić Zoran

    2002-01-01

    Full Text Available The truth is not only about accepting the facts. The truth includes emotional components - longing for acknowledgment of mistakes and validation of painful losses and experiences. While one side in the conflict considers itself as the only victim and experiences determination and acknowledgment of the truth as a possibility for healing its own trauma through satisfaction of justice and compensation, the other side is not accepting the truth. For this other side, confrontation with the facts is a painful trauma, which endangers individual moral norms, threatens the national identity and requires, on individual level, plugging in the defense mechanism, in order to prevent penetration of painful emotions into the consciousness. Primitive psychological mechanisms of defense, focused around splitting (projection, denial, are the main obstacles in accepting the truth both on individual and group level. There is also another extreme form of reaction manifested through "hypertrophy" of the truth and one-sided self-accusation. In this paper the author presents psychological explanation of the process of accepting the truth as the prerequisite for reconciliation and transformation of the conflict.

  16. Estimating Acceptability of Financial Health Incentives

    Science.gov (United States)

    Bigsby, Elisabeth; Seitz, Holli H.; Halpern, Scott D.; Volpp, Kevin; Cappella, Joseph N.

    2017-01-01

    A growing body of evidence suggests that financial incentives can influence health behavior change, but research on the public acceptability of these programs and factors that predict public support have been limited. A representative sample of U.S. adults (N = 526) were randomly assigned to receive an incentive program description in which the…

  17. Retained gas sampler system acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, N.S., Westinghouse Hanford

    1996-07-18

    Acceptance test results for the Retained Gas Sampler System (RGSS) obtained in the 306E laboratory are reported. The RGSS will be utilized to retrieve and analyze samples from the Hanford flammable gas watch-list tanks to determine the quantity and chemistry of gases confined within the waste.

  18. Influence Processes for Information Technology Acceptance

    DEFF Research Database (Denmark)

    Bhattacherjee, Anol; Sanford, Clive Carlton

    2006-01-01

    This study examines how processes of external influence shape information technology acceptance among potential users, how such influence effects vary across a user population, and whether these effects are persistent over time. Drawing on the elaboration-likelihood model (ELM), we compared two...

  19. Perception, acceptance and uptake of Human papillomavirus ...

    African Journals Online (AJOL)

    Infection with Human papillomavirus (HPV) contributes to malignant changes in the cervix leading to cancer mortality among women. HPV vaccine is now available for its prevention, yet the level of uptake is low. The study aimed at determining Perception, Acceptance and Uptake of Human papillomavirus Vaccine among ...

  20. Acceptance of sugar reduction in flavored yogurt.

    Science.gov (United States)

    Chollet, M; Gille, D; Schmid, A; Walther, B; Piccinali, P

    2013-09-01

    To investigate what level of sugar reduction is accepted in flavored yogurt, we conducted a hedonic test focusing on the degree of liking of the products and on optimal sweetness and aroma levels. For both flavorings (strawberry and coffee), consumers preferred yogurt containing 10% added sugar. However, yogurt containing 7% added sugar was also acceptable. On the just-about-right scale, yogurt containing 10% sugar was more often described as too sweet compared with yogurt containing 7% sugar. On the other hand, the sweetness and aroma intensity for yogurt containing 5% sugar was judged as too low. A second test was conducted to determine the effect of flavoring concentration on the acceptance of yogurt containing 7% sugar. Yogurts containing the highest concentrations of flavoring (11% strawberry, 0.75% coffee) were less appreciated. Additionally, the largest percentage of consumers perceived these yogurts as "not sweet enough." These results indicate that consumers would accept flavored yogurts with 7% added sugar instead of 10%, but 5% sugar would be too low. Additionally, an increase in flavor concentration is undesirable for yogurt containing 7% added sugar. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  1. 7 CFR 1207.323 - Acceptance.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Acceptance. 1207.323 Section 1207.323 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN...

  2. Acceptance of homosexuality in the Netherlands 2011

    NARCIS (Netherlands)

    Saskia Keuzenkamp

    2011-01-01

    The Dutch government wishes to promote the social acceptance of homosexuality. To gain an impression of the current status and the progress in achieving this objective, the government asked the Netherlands Institute for Social Research/SCP to carry out a study of the current statistics and

  3. Staff Acceptance of Tele-ICU Coverage

    Science.gov (United States)

    Chan, Paul S.; Cram, Peter

    2011-01-01

    Background: Remote coverage of ICUs is increasing, but staff acceptance of this new technology is incompletely characterized. We conducted a systematic review to summarize existing research on acceptance of tele-ICU coverage among ICU staff. Methods: We searched for published articles pertaining to critical care telemedicine systems (aka, tele-ICU) between January 1950 and March 2010 using PubMed, Cumulative Index to Nursing and Allied Health Literature, Global Health, Web of Science, and the Cochrane Library and abstracts and presentations delivered at national conferences. Studies were included if they provided original qualitative or quantitative data on staff perceptions of tele-ICU coverage. Studies were imported into content analysis software and coded by tele-ICU configuration, methodology, participants, and findings (eg, positive and negative staff evaluations). Results: Review of 3,086 citations yielded 23 eligible studies. Findings were grouped into four categories of staff evaluation: overall acceptance level of tele-ICU coverage (measured in 70% of studies), impact on patient care (measured in 96%), impact on staff (measured in 100%), and organizational impact (measured in 48%). Overall acceptance was high, despite initial ambivalence. Favorable impact on patient care was perceived by > 82% of participants. Staff impact referenced enhanced collaboration, autonomy, and training, although scrutiny, malfunctions, and contradictory advice were cited as potential barriers. Staff perceived the organizational impact to vary. An important limitation of available studies was a lack of rigorous methodology and validated survey instruments in many studies. Conclusions: Initial reports suggest high levels of staff acceptance of tele-ICU coverage, but more rigorous methodologic study is required. PMID:21051386

  4. Predicting the Operational Acceptability of Route Advisories

    Science.gov (United States)

    Evans, Antony; Lee, Paul

    2017-01-01

    NASA envisions a future Air Traffic Management system that allows safe, efficient growth in global operations, enabled by increasing levels of automation and autonomy. In a safety-critical system, the introduction of increasing automation and autonomy has to be done in stages, making human-system integrated concepts critical in the foreseeable future. One example where this is relevant is for tools that generate more efficient flight routings or reroute advisories. If these routes are not operationally acceptable, they will be rejected by human operators, and the associated benefits will not be realized. Operational acceptance is therefore required to enable the increased efficiency and reduced workload benefits associated with these tools. In this paper, the authors develop a predictor of operational acceptability for reroute advisories. Such a capability has applications in tools that identify more efficient routings around weather and congestion and that better meet airline preferences. The capability is based on applying data mining techniques to flight plan amendment data reported by the Federal Aviation Administration and data on requested reroutes collected from a field trial of the NASA developed Dynamic Weather Routes tool, which advised efficient route changes to American Airlines dispatchers in 2014. 10-Fold cross validation was used for feature, model and parameter selection, while nested cross validation was used to validate the model. The model performed well in predicting controller acceptance or rejection of a route change as indicated by chosen performance metrics. Features identified as relevant to controller acceptance included the historical usage of the advised route, the location of the maneuver start point relative to the boundaries of the airspace sector containing the maneuver start (the maneuver start sector), the reroute deviation from the original flight plan, and the demand level in the maneuver start sector. A random forest with forty

  5. Acceptance of lean redesigns in primary care: A contextual analysis.

    Science.gov (United States)

    Hung, Dorothy; Gray, Caroline; Martinez, Meghan; Schmittdiel, Julie; Harrison, Michael I

    Lean is a leading change strategy used in health care to achieve short-term efficiency and quality improvement while promising longer-term system transformation. Most research examines Lean intervention to address isolated problems, rather than to achieve broader systemic changes to care delivery. Moreover, no studies examine contextual influences on system-wide Lean implementation efforts in primary care. The aim of this study was to identify contextual factors most critical to implementing and scaling Lean redesigns across all primary care clinics in a large, ambulatory care delivery system. Over 100 interviews and focus groups were conducted with frontline physicians, clinical staff, and operational leaders. Data analysis was guided by a modified Consolidated Framework for Implementation Research (CFIR), a popular implementation science framework. On the basis of expert recommendations, the modified framework targets factors influencing the implementation of process redesigns. This modified framework, the CFIR-PR, informed our identification of contextual factors that most impacted Lean acceptance among frontline physicians and staff. Several domains identified by the CFIR-PR were critical to acceptance of Lean redesigns. Regarding the implementation process acceptance was influenced by time and intensity of exposure to changes, "top-down" versus "bottom-up" implementation styles, and degrees of employee engagement in developing new workflows. Important factors in the inner setting were the clinic's culture and style of leadership, along with availability of information about Lean's effectiveness. Last, implementation efforts were impacted by individual and team characteristics regarding changed work roles and related issues of professional identity, authority, and autonomy. This study underscores the need for change leaders to consider the contextual factors that surround efforts to implement Lean in primary care. As Lean redesigns are scaled across a system

  6. Medication-wide association studies

    NARCIS (Netherlands)

    P.B. Ryan (Patrick); D. Madigan (David); P.E. Stang (Paul); M.J. Schuemie (Martijn); G. Hripcsak (G.)

    2013-01-01

    textabstractUndiscovered side effects of drugs can have a profound effect on the health of the nation, and electronic health-care databases offer opportunities to speed up the discovery of these side effects. We applied a "medication-wide association study" approach that combined multivariate

  7. The Ooty Wide Field Array

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Astrophysics and Astronomy; Volume 38; Issue 1. The Ooty Wide Field Array. C. R. Subrahmanya P. K. Manoharan Jayaram N. Chengalur. Review Article Volume 38 Issue 1 March 2017 Article ID ... Keywords. Cosmology: large scale structure of Universe; intergalactic medium; diffuse radiation.

  8. Impact assessment of commodity standards

    NARCIS (Netherlands)

    Ruben, Ruerd

    2017-01-01

    Voluntary commodity standards are widely used to enhance the performance of tropical agro-food chains and to support the welfare and sustainability of smallholder farmers. Different methods and approaches are used to assess the effectiveness and impact of these certification schemes at

  9. A standard experimental 'chemical burn'.

    Science.gov (United States)

    Kim, J; Weibel, T J; Carter, E J; Calobrace, M B; Foldi, J F; Zawacki, B E

    1994-06-01

    To establish a standard method for producing experimental cutaneous injuries caused by contact with corrosive liquids, we modified an apparatus and method recommended by Walker and Mason in 1967 to produce experimental thermal burns. The resulting procedure proved to be safe, reproducible, humane and efficient and can be used with a wide variety of corrosive liquids.

  10. Possibilities and Implications of Using the ICF and Other Vocabulary Standards in Electronic Health Records.

    Science.gov (United States)

    Vreeman, Daniel J; Richoz, Christophe

    2015-12-01

    There is now widespread recognition of the powerful potential of electronic health record (EHR) systems to improve the health-care delivery system. The benefits of EHRs grow even larger when the health data within their purview are seamlessly shared, aggregated and processed across different providers, settings and institutions. Yet, the plethora of idiosyncratic conventions for identifying the same clinical content in different information systems is a fundamental barrier to fully leveraging the potential of EHRs. Only by adopting vocabulary standards that provide the lingua franca across these local dialects can computers efficiently move, aggregate and use health data for decision support, outcomes management, quality reporting, research and many other purposes. In this regard, the International Classification of Functioning, Disability, and Health (ICF) is an important standard for physiotherapists because it provides a framework and standard language for describing health and health-related states. However, physiotherapists and other health-care professionals capture a wide range of data such as patient histories, clinical findings, tests and measurements, procedures, and so on, for which other vocabulary standards such as Logical Observation Identifiers Names and Codes and Systematized Nomenclature Of Medicine Clinical Terms are crucial for interoperable communication between different electronic systems. In this paper, we describe how the ICF and other internationally accepted vocabulary standards could advance physiotherapy practise and research by enabling data sharing and reuse by EHRs. We highlight how these different vocabulary standards fit together within a comprehensive record system, and how EHRs can make use of them, with a particular focus on enhancing decision-making. By incorporating the ICF and other internationally accepted vocabulary standards into our clinical information systems, physiotherapists will be able to leverage the potent

  11. Public Acceptance of Plant Biotechnology and GM Crops.

    Science.gov (United States)

    Lucht, Jan M

    2015-07-30

    A wide gap exists between the rapid acceptance of genetically modified (GM) crops for cultivation by farmers in many countries and in the global markets for food and feed, and the often-limited acceptance by consumers. This review contrasts the advances of practical applications of agricultural biotechnology with the divergent paths-also affecting the development of virus resistant transgenic crops-of political and regulatory frameworks for GM crops and food in different parts of the world. These have also shaped the different opinions of consumers. Important factors influencing consumer's attitudes are the perception of risks and benefits, knowledge and trust, and personal values. Recent political and societal developments show a hardening of the negative environment for agricultural biotechnology in Europe, a growing discussion-including calls for labeling of GM food-in the USA, and a careful development in China towards a possible authorization of GM rice that takes the societal discussions into account. New breeding techniques address some consumers' concerns with transgenic crops, but it is not clear yet how consumers' attitudes towards them will develop. Discussions about agriculture would be more productive, if they would focus less on technologies, but on common aims and underlying values.

  12. Public Acceptance of Plant Biotechnology and GM Crops

    Directory of Open Access Journals (Sweden)

    Jan M. Lucht

    2015-07-01

    Full Text Available A wide gap exists between the rapid acceptance of genetically modified (GM crops for cultivation by farmers in many countries and in the global markets for food and feed, and the often-limited acceptance by consumers. This review contrasts the advances of practical applications of agricultural biotechnology with the divergent paths—also affecting the development of virus resistant transgenic crops—of political and regulatory frameworks for GM crops and food in different parts of the world. These have also shaped the different opinions of consumers. Important factors influencing consumer’s attitudes are the perception of risks and benefits, knowledge and trust, and personal values. Recent political and societal developments show a hardening of the negative environment for agricultural biotechnology in Europe, a growing discussion—including calls for labeling of GM food—in the USA, and a careful development in China towards a possible authorization of GM rice that takes the societal discussions into account. New breeding techniques address some consumers’ concerns with transgenic crops, but it is not clear yet how consumers’ attitudes towards them will develop. Discussions about agriculture would be more productive, if they would focus less on technologies, but on common aims and underlying values.

  13. DOE standard: Radiological control

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  14. Standard for Models and Simulations

    Science.gov (United States)

    Steele, Martin J.

    2016-01-01

    This NASA Technical Standard establishes uniform practices in modeling and simulation to ensure essential requirements are applied to the design, development, and use of models and simulations (MS), while ensuring acceptance criteria are defined by the program project and approved by the responsible Technical Authority. It also provides an approved set of requirements, recommendations, and criteria with which MS may be developed, accepted, and used in support of NASA activities. As the MS disciplines employed and application areas involved are broad, the common aspects of MS across all NASA activities are addressed. The discipline-specific details of a given MS should be obtained from relevant recommended practices. The primary purpose is to reduce the risks associated with MS-influenced decisions by ensuring the complete communication of the credibility of MS results.

  15. Traffic Flow Wide-Area Surveillance system

    Energy Technology Data Exchange (ETDEWEB)

    Allgood, G.O.; Ferrell, R.K.; Kercel, S.W.; Abston, R.A.

    1994-09-01

    Traffic management can be thought of as a stochastic queuing process where the serving time at one of its control points is dynamically linked to the global traffic pattern, which is, in turn, dynamically linked to the control point. For this closed-loop system to be effective, the traffic management system must sense and interpret a large spatial projection of data originating from multiple sensor suites. This concept is the basis for the development of a Traffic Flow Wide-Area Surveillance (TFWAS) system. This paper presents the results of a study by Oak Ridge National Laboratory to define the operational specifications and characteristics, to determine the constraints, and to examine the state of technology of a TFWAS system in terms of traffic management and control. In doing so, the functions and attributes of a TFWAS system are mapped into an operational structure consistent with the Intelligent Vehicle Highway System (IVHS) concept and the existing highway infrastructure. This mapping includes identifying candidate sensor suites and establishing criteria, requirements, and performance measures by which these systems can be graded in their ability and practicality to meet the operational requirements of a TFWAS system. In light of this, issues such as system integration, applicable technologies, impact on traffic management and control, and public acceptance are addressed.

  16. Traffic flow wide-area surveillance system

    Science.gov (United States)

    Allgood, Glenn O.; Ferrell, Regina K.; Kercel, Stephen W.; Abston, Ruth A.

    1995-01-01

    Traffic management can be thought of as a stochastic queuing process where the serving time at one of its control points is dynamically linked to the global traffic pattern, which is, in turn, dynamically linked to the control point. For this closed-loop system to be effective, the traffic management system must sense and interpret a large spatial projection of data originating from multiple sensor suites. This concept is the basis for the development of a traffic flow wide-area surveillance (TFWAS) system. This paper presents the results of a study by Oak Ridge National Laboratory to define the operational specifications and characteristics, to determine the constraints, and to examine the state of technology of a TFWAS system in terms of traffic management and control. In doing so, the functions and attributes of a TFWAS system are mapped into an operational structure consistent with the Intelligent Vehicle Highway System (IVHS) concept and the existing highway infrastructure. This mapping includes identifying candidate sensor suites and establishing criteria, requirements, and performance measures by which these systems can be graded in their ability and practicality to meet the operational requirements of a TFWAS system. In light of this, issues such as system integration, applicable technologies, impact on traffic management and control, and public acceptance are addressed.

  17. Acceptance sampling for attributes via hypothesis testing and the hypergeometric distribution

    Science.gov (United States)

    Samohyl, Robert Wayne

    2017-10-01

    This paper questions some aspects of attribute acceptance sampling in light of the original concepts of hypothesis testing from Neyman and Pearson (NP). Attribute acceptance sampling in industry, as developed by Dodge and Romig (DR), generally follows the international standards of ISO 2859, and similarly the Brazilian standards NBR 5425 to NBR 5427 and the United States Standards ANSI/ASQC Z1.4. The paper evaluates and extends the area of acceptance sampling in two directions. First, by suggesting the use of the hypergeometric distribution to calculate the parameters of sampling plans avoiding the unnecessary use of approximations such as the binomial or Poisson distributions. We show that, under usual conditions, discrepancies can be large. The conclusion is that the hypergeometric distribution, ubiquitously available in commonly used software, is more appropriate than other distributions for acceptance sampling. Second, and more importantly, we elaborate the theory of acceptance sampling in terms of hypothesis testing rigorously following the original concepts of NP. By offering a common theoretical structure, hypothesis testing from NP can produce a better understanding of applications even beyond the usual areas of industry and commerce such as public health and political polling. With the new procedures, both sample size and sample error can be reduced. What is unclear in traditional acceptance sampling is the necessity of linking the acceptable quality limit (AQL) exclusively to the producer and the lot quality percent defective (LTPD) exclusively to the consumer. In reality, the consumer should also be preoccupied with a value of AQL, as should the producer with LTPD. Furthermore, we can also question why type I error is always uniquely associated with the producer as producer risk, and likewise, the same question arises with consumer risk which is necessarily associated with type II error. The resolution of these questions is new to the literature. The

  18. Motivational Interviewing (MINT) Improves Continuous Positive Airway Pressure (CPAP) Acceptance and Adherence: A Randomized Controlled Trial

    Science.gov (United States)

    Olsen, Sara; Smith, Simon S.; Oei, Tian P. S.; Douglas, James

    2012-01-01

    Objective: Adherence to continuous positive airway pressure (CPAP) therapy for obstructive sleep apnoea (OSA) is poor. We assessed the effectiveness of a motivational interviewing intervention (motivational interview nurse therapy [MINT]) in addition to best practice standard care to improve acceptance and adherence to CPAP therapy in people with…

  19. Preliminary waste acceptance criteria for the ICPP spent fuel and waste management technology development program

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, L.L.; Shikashio, R.

    1993-09-01

    The purpose of this document is to identify requirements to be met by the Producer/Shipper of Spent Nuclear Fuel/High-LeveL Waste SNF/HLW in order for DOE to be able to accept the packaged materials. This includes defining both standard and nonstandard waste forms.

  20. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2011-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  1. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2010-09-03

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  2. Social acceptance of comparative optimism and realism.

    Science.gov (United States)

    Milhabet, I; Verlhiac, J F

    2011-10-01

    Studies of optimism and realism (the accuracy of people's outlook on the future) seek to understand the respective effects of these elements on social approbation. Two experiments examined how comparative optimism (vs. pessimism) and realism (vs. unrealism) interacted to influence the targets' social acceptance based on their perceptions about the future. The results showed that realism, or accuracy of prediction, increased the positive social effects of a comparatively optimistic outlook on the future. In contrast, targets who exhibited comparative pessimism were more socially acceptable when their predictions were unrealistic rather than realistic. This phenomenon was examined by also considering the polarity of the events about which judgments were expressed. These results contribute to the body of research about the relationship between optimism and pessimism and the relationship between optimism and realism.

  3. Radioactive waste disposal and public acceptance aspects

    Energy Technology Data Exchange (ETDEWEB)

    Ulhoa, Barbara M.A.; Aleixo, Bruna L.; Mourao, Rogerio P.; Ferreira, Vinicius V.M., E-mail: mouraor@cdtn.b, E-mail: vvmf@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Part of the public opinion around the world considers the wastes generated due to nuclear applications as the biggest environmental problem of the present time. The development of a solution that satisfies everybody is a great challenge, in that obtaining public acceptance for nuclear enterprises is much more challenging than solving the technical issues involved. Considering that the offering of a final solution that closes the radioactive waste cycle has a potentially positive impact on public opinion, the objective of this work is to evaluate the amount of the radioactive waste volume disposed in a five-year period in several countries and gauge the public opinion regarding nuclear energy. The results show that the volume of disposed radioactive waste increased, a fact that stresses the importance of promoting discussions about repositories and public acceptance. (author)

  4. Crew Transportation Technical Standards and Design Evaluation Criteria

    Science.gov (United States)

    Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

    2015-01-01

    Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

  5. 1993 DOE technical standards managers workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This workshop is focused on the benefits of the DOE technical standards program, which is focused toward the preferred use of non-Government standards for DOE activities and the development of DOE technical standards when non-Government standards are not available or are inappropriate. One goal of the program is to replace redundant site-specific standards with more universally accepted documents that have been scrutinized by experts. This replacement is discussed at the workshop along with the problems encountered and solutions found. The workshop provided an opportunity for geographically dispersed people to meet and advance their standards knowledge and efforts to support the program. Safety issues have been the driving force behind the program to date. Several companies offer products and services that support the development, processing, and retrieval of standards. This document mostly comprise vugraphs.

  6. ISET ORS Bus Standards and Prototype

    OpenAIRE

    Sandhoo, Gurpartap; Johnson, Mark; Raynor, William; Hurley, Michael; Stadter, Patrick; Marley, Michael; Apland, Clint; Lee, Robert; Bruzzi, Jonathan; Williams, Bruce; SCHAEFER, EDWARD, JAY; Vernon, Steven; Schwartz, Paul; Moretti, George; Doyne, Thomas

    2007-01-01

    Advancing sound and accepted spacecraft bus standards is the objective of the Office of the Secretary of Defense’s (OSD) Operationally Responsive Space (ORS) Bus Standards Initiative. This effort involves multiple government, industry, and academia participants assembled into an Integrated System Engineering Team (ISET). The core ISET industry team members include AeroAstro, Boeing, Design Net Engineering, General Dynamics Spectrum Astro, Loral, Microcosm, MicroSat, Orbital, Raytheon, and Swa...

  7. Intrinsic work motivation and pension reform acceptance

    OpenAIRE

    Heinemann, Friedrich; Hennighausen, Tanja; Moessinger, Marc-Daniel

    2011-01-01

    Although demographic change leaves pay-as-you-go pension systems unsustainable, reforms, such as a higher pension age, are highly unpopular. This contribution looks into the role of intrinsic motivation as a driver for pension reform acceptance. Theoretical reasoning suggests that this driver should be relevant: The choice among different pension reform options (increasing pension age, increasing contributions, cutting pensions) can be analyzed within the framework of an optimal job separatio...

  8. Acceptance Versus Distraction for Unwanted Sexual Thoughts

    OpenAIRE

    Sherwood, Joseph A.

    2011-01-01

    This on-line study examined 67 participants who rated their sexual thought distress level as moderately distressing or greater, on the successfulness of an acceptance-based strategy and a distraction-based strategy for dealing with unwanted sexual thoughts. The study began with the completion of an assessment battery, which measured attitudes about sexual thoughts. During a pre-intervention three minute time period, participants were asked to record/report occurrences a previously identified ...

  9. Perceived acceptability of female smoking in China.

    Science.gov (United States)

    Sansone, Natalie; Yong, Hua-Hie; Li, Lin; Jiang, Yuan; Fong, Geoffrey T

    2015-11-01

    Female smoking prevalence in China is very low but may rise with increased tobacco marketing towards women and changing norms. However, little is known about current perceptions of women smoking in China. This study sought to examine smokers' and non-smokers' perceived acceptability of female smoking and how it changed over time in China. Data come from Waves 1 to 3 (2006-2009) of the International Tobacco Control China Survey, a face-to-face cohort survey of approximately 800 adult smokers and 200 non-smokers in each of seven cities in mainland China. At Wave 3 (2009), about 38% of smokers and 9% of non-smokers agreed that female smoking is acceptable with women being almost twice as likely to do so as men (67% vs 36% and 11% vs 6%, respectively). In addition to women, smokers who were younger and had more positive perceptions of smoking in general were more likely to say that female smoking is acceptable. This perception significantly increased from Wave 1 (2006) to Wave 3 (2009), as did the perception that smoking is a sign of sophistication, but other general perceptions of smoking did not significantly change between 2006 and 2009. Norms against female smoking appear to remain strong in China, but female smoking may be becoming more acceptable. It is important to monitor these perceptions to prevent a rise in female smoking prevalence along with an increase in tobacco-related death and disease among women in China. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  10. Measuring social risk and determining its acceptability

    Energy Technology Data Exchange (ETDEWEB)

    Lathrop, J.W.

    1978-07-14

    The implementation of a nuclear waste management technology raises several issues concerning the regulation of social risk. This paper presents a decision analytic approach to resolving some of those issues. A methodology for developing a radiological risk measure is presented, and several approaches to defining acceptable levels of that risk measure are considered. The methodology presented is oriented toward the development of radiological performance objectives for use as guidance in the drafting of regulations.

  11. Monitoring Acceptance of homosexuality in the Netherlands

    OpenAIRE

    Saskia Keuzenkamp

    2010-01-01

    Promoting acceptance of homosexuality is the main objective of current Dutch policy on the emancipation of gays and lesbians. At the request of Ronald Plasterk, the former Dutch government minister with responsibility for this policy, the Netherlands Institute for Social Research/SCP is monitoring developments in society in this regard. This preliminary publication, which precedes a report to be published in June 2010, contains data from population surveys. What are the attitudes of the Dutch...

  12. Accepted Common Interest Community (CIC) Proposals.

    Science.gov (United States)

    2014-01-01

    These are the 18 accepted proposals for the three Common Interest Community (CIC) sessions at IAYT's Symposium on Yoga Therapy and Research (SYTAR), June 5-8, 2014, in Austin, Texas and published in the Final Program Guide and CIC Works for SYTAR 2014. The sessions were CIC#1 Rehab Professionals: Bridging the Past with the Future and CIC#2a & CIC#2b Mental, Emotional and Spiritual Health.

  13. The sociologically acceptable definition of religion

    OpenAIRE

    Blagojević Mirko

    2004-01-01

    In this article the author has presented several important issues regarding the sociology of religion, but primarily the issue of the sociologically acceptable definition of religion both in theoretical and empirical research. Bearing in mind the sociology of religion in former Yugoslavia the author has first discussed the possibility of a general definition of the sociology of religion, but has stated the opposite view as well. Then he has dealt with the two basic approaches towards religion...

  14. Acceptance of homosexuality in the Netherlands 2011

    OpenAIRE

    Saskia Keuzenkamp

    2011-01-01

    The Dutch government wishes to promote the social acceptance of homosexuality. To gain an impression of the current status and the progress in achieving this objective, the government asked the Netherlands Institute for Social Research/SCP to carry out a study of the current statistics and trends in this regard. This report shows that the Netherlands is still the most gay-tolerant country in Europe. Nonetheless, there are limits to that tolerance and there are some groups in Dutch society whi...

  15. Acceptance of homosexuality in the Netherlands

    OpenAIRE

    Lisette Kuyper; Floor Bakker

    2006-01-01

    Original title: De houding ten opzichte van homoseksualiteit. To date, relatively little systematic research has been carried out on public attitudes to homosexual men and women in the Netherlands - far less than in the United States, for example. SCP has recently carried out a large-scale survey of the attitudes of the Dutch public to homosexuality; this was published earlier this year under the title Just doing what comes naturally. Acceptance of homosexuality in the Netherlands (Gewoon doe...

  16. G+ COMMUNITY: MEASURING TEACHERS’ READINESS AND ACCEPTANCE

    OpenAIRE

    Mohd Faisal Farish Ishak; Rashidah Rahamat; Muhammad Hazrul Haris Fadzilah; Abdul Ghani Abu

    2017-01-01

    The purpose of this paper is to explore teachers’ acceptance and readiness in using the cloud-based community as a platform for professional collaboration related to their teaching and learning. Familiarity with certain social networking platforms has made the preferable collaboration among teachers only limited to using Facebook, WhatsApp or Telegram. However, with time and space constraints in schools, some of the sharing sessions could not be done effectively most of the time. The study fo...

  17. IMPLEMENTING A RISK MANAGEMENT STANDARD

    Directory of Open Access Journals (Sweden)

    Constantin PREDA

    2013-01-01

    Full Text Available After risk management “conquered” more and more project managers’ minds and showed its benefits for business and programs, the need to have a global risk management standard has become a crucial issue in the world of risk management. But having a global risk management standard has been a big challenge, starting from the decision of developing the standard (March-June 2005, to the moment of publishing it, November 2009. So, developing the ISO 31000:2009 standard has been more or less like a bumpy ride. Apparently, the people involved in developing the global risk management standard understood from the very beginning that no challenges are too big, nor any tasks too small and that the task of having a new, comprehensive global risk management standard should be completed with excellence: defining the principles and the framework guiding the risk management process applicable for all type of organizations and for a wide range of activities. Coming up with a global standard should always be based on the real organizations’ needs and should fulfill real risk management requirements. The article is trying to present the pros and cons of risk management standard implementation, challenging the implementation process itself and the added value of implementing the standard due to the lack of implementation enablers, like risk culture, a real problem especially in an international environment.

  18. Wide Bandgap Extrinsic Photoconductive Switches

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, James S. [State Univ. of New York (SUNY), Plattsburgh, NY (United States); Univ. of California, Davis, CA (United States)

    2012-01-20

    Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.

  19. Peer acceptance/rejection and academic achievement

    Directory of Open Access Journals (Sweden)

    Spasenović Vera Z.

    2003-01-01

    Full Text Available Considerations of the nature and role of peer relations in child development indicate that peer interaction is an important factor in developing social and cognitive competences. Peer relations not only influence current but also subsequent academic, behavioral and emotional development. Accepted students more often display better academic achievement, whereas the status of rejection is coupled with academic difficulties and lower academic achievement. Peer rejection is a relatively stable characteristic that can be used to predict difficulties in the years to come, such as repeat of a grade, early drop out, unjustified absences, adaptability problems etc. It is considered that correlation between academic achievement and peer group status is mediated by student social behavior at school. The quality of peer relations and academic achievement are mutually influential i.e. peer acceptance serves as a social resource that facilitates academic achievement, but academic achievement has effects on student acceptance. To help students who display difficulties in social relations, various intervention programs have been well thought of so as to contribute to interpersonal efficiency promotion. Concerning interdependence of social behavior, peer status and academic achievement, it is reasonable to expect that positive changes in behavior, frequently leading to the change of rejection status, will produce, directly or indirectly, positive effects on academic achievement too.

  20. A structural model of technology acceptance

    Directory of Open Access Journals (Sweden)

    Etienne Erasmus

    2015-02-01

    Full Text Available Orientation: Enterprise resource systems have not always led to significant organisational enhancement and many projects in which these systems have been implemented turn out to be over budget, not on time and unsuccessful.Research purpose: The aim of this study was to test the technology acceptance model within a South African SAP® Enterprise Resource Planning user environment.Motivation for the study: No study could be traced in which the technology acceptance model has been evaluated in the South African context.Research approach, design and method: A cross-sectional survey design was used. The 23-item Technology Acceptance Model Questionnaire was deployed amongst SAP® Enterprise Resource Planning users (N = 241. Main findings: The results confirmed significant paths from perceived usefulness of the information system to attitudes towards and behavioural intentions to use it. Furthermore, behavioural intention to use the system predicted actual use thereof. Perceived ease of use indirectly affected attitudes towards and behavioural intentions to use via perceived usefulness of the information system.Practical/managerial implications: Practitioners should build user confidence by ensuring the ease of use of a new system, providing relevant education, training and guidance and reiterating its usefulness and future added value to the user’s job and career.Contribution/value-add: This study contributes to scientific knowledge regarding the influence of individuals’ perceptions of information system usage on their attitudes, behavioural intentions and actual use of such a system.

  1. Acceptability of contraception for men: a review.

    Science.gov (United States)

    Glasier, Anna

    2010-11-01

    Methods of contraception for use by men include condoms, withdrawal and vasectomy. Prevalence of use of a method and continuation rates are indirect measures of acceptability. Worldwide, none of these "male methods" accounts for more than 7% of contraceptive use although uptake varies considerably between countries. Acceptability can be assessed directly by asking about intended (hypothetical) use and assessing satisfaction during/after use. Since they have been around for a very long time, there are very few data of this nature on condoms (as contraceptives rather than for prevention of infection), withdrawal or vasectomy. There are direct data on the acceptability of hormonal methods for men but from relatively small clinical trials which undoubtedly do not represent the real world. Surveys undertaken among the male general public demonstrate that, whatever the setting, at least 25% of men - and in most countries substantially more - would consider using hormonal contraception. Although probably an overestimate of the number of potential users when such a method becomes available, it would appear that hormonal contraceptives for men may have an important place on the contraceptive menu. Despite commonly expressed views to the contrary, most women would trust their male partner to use a hormonal method. Copyright © 2010 Elsevier Inc. All rights reserved.

  2. Considerations for acceptability in Bible translation

    Directory of Open Access Journals (Sweden)

    Diphus C. Chemorion

    2009-09-01

    Full Text Available The ministry of Bible translation is an important component of the Great Commission (Matthew 28:18�20 and its mandate is to reach everyone with the word of God. One of the main goals of a Bible translation project is to produce a translation that will be used by the church in a given language group. Bible translation teams believe that the lives of the intended recipients will be changed positively when they gain access to Scripture in their own language. However, recent developments regarding Scripture use have shown that the success of any Bible translation project depends on whether or not its products are acceptable. If a translation is not acceptable to the intended audience, it may not be used, and as a result, it may fail to bring about the desired impact. This article explores the concept of �acceptability� as used in Bible translation and highlights important considerations that translators need to keep in mind in order to enhance the acceptability of their translation products.

  3. Acceptability of male condom: An Indian scenario

    Directory of Open Access Journals (Sweden)

    Balaiah Donta

    2014-01-01

    Full Text Available The National Family Planning Programme of India had introduced condom as one of the family planning methods in the late1960s. Condom was promoted as a family planning method through social marketing since its inception. With the increasing prevalence and incidence of sexually transmitted infections (STIs including HIV/AIDS, condom was also promoted as a dual method for protection against both unintended pregnancies as well as sexually transmitted infections. Despite efforts at various levels, the overall use of condom among couples in India is low. Here we present literature review of studies to understand the condom acceptability among couples in India. Specifically, the paper assesses research and programmes that have been carried out to increase the use of condom among couples; determinants of condom use; reason for not using condom; and perception versus experience of condom failure. The reported problems related to condom use included non acceptance by partner, perceived ineffectiveness, less comfort, lack of sexual satisfaction, husband′s alcohol use, depression, and anxiety, and not available at that instant. The role of media in the promotion of condom use was indicated as an important way to increase awareness and use. Multiple strategies would help in acceptance of male condom.

  4. G+ COMMUNITY: MEASURING TEACHERS’ READINESS AND ACCEPTANCE

    Directory of Open Access Journals (Sweden)

    Mohd Faisal Farish Ishak

    2017-08-01

    Full Text Available The purpose of this paper is to explore teachers’ acceptance and readiness in using the cloud-based community as a platform for professional collaboration related to their teaching and learning. Familiarity with certain social networking platforms has made the preferable collaboration among teachers only limited to using Facebook, WhatsApp or Telegram. However, with time and space constraints in schools, some of the sharing sessions could not be done effectively most of the time. The study focuses on teachers’ acceptance and readiness of having their community in the cloud when they were introduced to the platform during a Continuous Professional Development (CPD course. A total number of 61 teachers used Google Community named as ‘Contemporary Children’s Literature (CCL 2016’ as a platform for their Professional Learning Community (PLC during the course. Descriptive analysis was done using Google Sheets and the findings show that these teachers are receptive towards Google Community in terms of its engagement level, usefulness as well as ease of use. The introduction to Google Community has created a new pathway for their collaboration especially for teaching and learning purposes. In a nutshell, their acceptance towards the cloud-based community indicates that, given the right training channel, teachers are positive and opened to utilising and integrating the cloud-based technology in their current teaching practice.

  5. Wide and High Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-03-01

    The goal of this project is to develop and demonstrate the enabling technologies for Wide and High Additive Manufacturing (WHAM). WHAM will open up new areas of U.S. manufacturing for very large tooling in support of the transportation and energy industries, significantly reducing cost and lead time. As with Big Area Additive Manufacturing (BAAM), the initial focus is on the deposition of composite materials.

  6. Acceptability of anxiety management within UK armed forces.

    Science.gov (United States)

    Hicks, T; Banks, R; Fear, N T; Greenberg, N

    2013-09-01

    The Department of Community Mental Health (DCMH) at RAF Brize Norton runs a regular anxiety management day (AMD) which is a group intervention for regular military personnel who have been diagnosed with anxiety-related disorders. The AMD is a 1 day course for up to 20 participants run by two community mental health nurses based at the DCMH. It contains a combination of psycho-education and generic anxiety management techniques. To establish whether the AMD is acceptable to full time regular military personnel who have been referred to the DCMH. The acceptability of the AMD was assessed using a standardized feedback form, which asked about the patient's perception of the quality of the AMD and the course content. Feedback data were collected over a 12 month period between September 2010 and August 2011. Clinical and sociodemographic data were available for 91 of the 97 (94%) participants who participated in the AMD over the period from September 2010 to August 2011. Ninety-two per cent (89/97) of participants completed a post course survey immediately after they completed the AMD. Respectively, 95 and 93% considered the format and content of the AMD to be of good quality. The AMD fits well with the stepped care approach of the Improving Access to Psychological Therapies programme and resulted in a good level of patient satisfaction.

  7. Wide Bandgap Extrinsic Photoconductive Switches

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, James S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-07-03

    Semi-insulating Gallium Nitride, 4H and 6H Silicon Carbide are attractive materials for compact, high voltage, extrinsic, photoconductive switches due to their wide bandgap, high dark resistance, high critical electric field strength and high electron saturation velocity. These wide bandgap semiconductors are made semi-insulating by the addition of vanadium (4H and 6HSiC) and iron (2H-GaN) impurities that form deep acceptors. These deep acceptors trap electrons donated from shallow donor impurities. The electrons can be optically excited from these deep acceptor levels into the conduction band to transition the wide bandgap semiconductor materials from a semi-insulating to a conducting state. Extrinsic photoconductive switches with opposing electrodes have been constructed using vanadium compensated 6H-SiC and iron compensated 2H-GaN. These extrinsic photoconductive switches were tested at high voltage and high power to determine if they could be successfully used as the closing switch in compact medical accelerators.

  8. Evaluation of the Acceptance of Audience Response System by Corporations Using the Technology Acceptance Model

    Science.gov (United States)

    Chu, Hsing-Hui; Lu, Ta-Jung; Wann, Jong-Wen

    The purpose of this research is to explore enterprises' acceptance of Audience Response System (ARS) using Technology Acceptance Model (TAM). The findings show that (1) IT characteristics and facilitating conditions could be external variables of TAM. (2) The degree of E-business has positive significant correlation with behavioral intention of employees. (3) TAM is a good model to predict and explain IT acceptance. (4) Demographic variables, industry and firm characteristics have no significant correlation with ARS acceptance. The results provide useful information to managers and ARS providers that (1) ARS providers should focus more on creating different usages to enhance interactivity and employees' using intention. (2) Managers should pay attention to build sound internal facilitating conditions for introducing IT. (3) According to the degree of E-business, managers should set up strategic stages of introducing IT. (4) Providers should increase product promotion and also leverage academic and government to promote ARS.

  9. Gerontechnology acceptance by elderly Hong Kong Chinese: a senior technology acceptance model (STAM).

    Science.gov (United States)

    Chen, Ke; Chan, Alan Hoi Shou

    2014-01-01

    The purpose of this study was to develop and test a senior technology acceptance model (STAM) aimed at understanding the acceptance of gerontechnology by older Hong Kong Chinese people. The proposed STAM extended previous technology acceptance models and theories by adding age-related health and ability characteristics of older people. The proposed STAM was empirically tested using a cross-sectional questionnaire survey with a sample of 1012 seniors aged 55 and over in Hong Kong. The result showed that STAM was strongly supported and could explain 68% of the variance in the use of gerontechnology. For older Hong Kong Chinese, individual attributes, which include age, gender, education, gerontechnology self-efficacy and anxiety, and health and ability characteristics, as well as facilitating conditions explicitly and directly affected technology acceptance. These were better predictors of gerontechnology usage behaviour (UB) than the conventionally used attitudinal factors (usefulness and ease of use).

  10. Understanding Patient Acceptance of Risk with Treatment Options for Intermittent Claudication.

    Science.gov (United States)

    Morbi, Abigail H M; Coles, Sophie; Albayati, Mostafa; Nordon, Ian M; Shearman, Cliff

    2017-04-01

    Intermittent claudication has a major impact on the quality of life and functional ability of the patient. However, when treating these patients, management is largely influenced by vascular surgeons' perceptions of risk. There is little information available regarding the level of risk that patients perceive to be acceptable, when considering complications of treatment. This study investigates patients' acceptance of risk associated with current management options for intermittent claudication and explores factors associated with greater risk acceptance. Patients with confirmed intermittent claudication presenting to vascular clinic and supervised exercise classes were surveyed in a single-center prospective study. A standard gamble-type method was used to measure patients' acceptance of risk associated with medical treatment, angioplasty, and surgical bypass. Level of risk acceptance was correlated to patient factors. Fifty patients were surveyed; 74% were male, median age was 68 years (interquartile range [IQR] 59-74), maximal walking distance was 100 m (IQR 70-200), and ankle-brachial pressure index was 0.65 (IQR 0.60-0.78). Median risk acceptance for treatment failure was 70% for medical treatment, 50% for angioplasty, and 40% for surgical bypass. Median risk acceptance for major amputation and death was 0% for all 3 management options. Claudicants with maximal walking distance <100 m accepted higher risk of treatment failure (P = 0.0005 for medical treatment, P = 0.0038 for angioplasty), and death with medical treatment (P = 0.0009). There was no significance between claudication distance and risk acceptance of major amputation with any treatment modality or death with angioplasty or surgical bypass. There was no significant correlation among level of risk acceptance and age, gender, or diabetic status. Claudicants are prepared to accept significant risk of treatment failure, in order to gain benefit, but regardless of claudication distance, patients

  11. Reinforcement learning for Order Acceptance on a shared resource

    NARCIS (Netherlands)

    Mainegra Hing, M.; van Harten, Aart; Schuur, Peter

    2002-01-01

    Order acceptance (OA) is one of the main functions in business control. Basically, OA involves for each order a reject/accept decision. Always accepting an order when capacity is available could disable the system to accept more convenient orders in the future with opportunity losses as a

  12. Acceptance of counseling, voluntary HIV testing and use of ...

    African Journals Online (AJOL)

    The overall acceptance of pre-test counseling in labour among women with unknown sero-status was 71.7% while acceptance of counseling and voluntary HIV testing was 56.6%. Among those who accepted pre-test counseling in labour, 78.9% accepted HIV testing and 8.6% of these were found to be HIV infected.

  13. 48 CFR 552.270-29 - Acceptance of Space.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Acceptance of Space. 552... Acceptance of Space. As prescribed in 570.603, insert the following clause: Acceptance of Space (SEP 1999) (a... designated representative shall promptly inspect the space. (b) The Government will accept the space and the...

  14. Aspergillus PCR: one step closer to standardization.

    NARCIS (Netherlands)

    White, P.L.; Bretagne, S.; Klingspor, L.; Melchers, W.J.G.; McCulloch, E.; Schulz, B.; Finnstrom, N.; Mengoli, C.; Barnes, R.A.; Donnelly, J.P.; Loeffler, J.

    2010-01-01

    PCR has been used as an aid in the diagnosis of invasive aspergillosis for almost 2 decades. A lack of standardization has limited both its acceptance as a diagnostic tool and multicenter clinical evaluations, preventing its inclusion in disease-defining criteria. In 2006, the European Aspergillus

  15. Reviewer Standards in Division I Program Selection.

    Science.gov (United States)

    Cason, Carolyn L.; And Others

    Cason and Cason's model of performance rating was used to determine the extent to which variation in reviewer standards affected the reliability and validity of the program review process used to select papers for inclusion in the annual program. Data analyzed were the overall recommendation for acceptance and ratings on seven quality criteria…

  16. Providing Some Pharmacopoeial Standards for Nigerian Allium ...

    African Journals Online (AJOL)

    The essence of standardization of medicinal plants is to produce herbal medicines with acceptable safety, efficacy, quality and reproducibility. Allium cepa var. cepa L. (Amaryllidaceae) bulbs purchased from Sasha Market, Ibadan, Nigeria during the rainy season was subjected to organoleptic, morphological and ...

  17. The Dynamics of Standardization

    DEFF Research Database (Denmark)

    Brunsson, Nils; Rasche, Andreas; Seidl, David

    2012-01-01

    This paper suggests that when the phenomenon of standards and standardization is examined from the perspective of organization studies, three aspects stand out: the standardization of organizations, standardization by organizations and standardization as (a form of) organization. Following a comp...

  18. How is Acceptable Public Risk Determined?

    Energy Technology Data Exchange (ETDEWEB)

    Treichel, Judy [Nevada Nuclear Waste Task Force, Las Vegas, NV (United States)

    2001-07-01

    Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk

  19. HPV vaccination acceptability in young boys

    Directory of Open Access Journals (Sweden)

    Giancarlo Tisi

    2013-09-01

    Full Text Available PURPOSE: The aim of this study was to evaluate the comprehension and acceptance of HPV vaccination in parents of adolescent boys aged 11 to 15 years. METHODS: A cross-sectional survey was conducted by means of questionnaires sent directly to the homes of all families with young males aged between 11 and 15, residents of three municipalities of the Province of Brescia, Italy. The documentation also contained an informative leaflet summarizing the HPV-related disease characteristics, the burden of disease and the available strategies for prevention and treatment, illustrating the rationale of vaccination and describing the project and its phases. The questionnaire included questions on demographic data, acceptance and motivations for HPV vaccination. The collected data was analyzed using descriptive statistics. At the end of the study, parents who received the questionnaires were also offered the possibility of vaccinating their male sons for free. RESULTS: From a total of 1072 questionnaires sent, 161 where returned from the three selected municipalities (average response rate 15%; 97% of adolescent males involved in the study were Italian and 91% Catholic; 97% of parents declared themselves to be willing to vaccinate their sons: the principal motivation given (92% was prevention of the disease, cancerous or not, related to viral infection. Among the respondents not willing to vaccinate their sons, the motivation was lack of information about the vaccine and the disease. At the end of the study, around 71 boys were vaccinated. DISCUSSION: To our knowledge, this is the first survey in Italy exclusively conducted on parents of adolescent males about the acceptability and feasibility of vaccination against HPV: a very high percentage of respondents was favorable to accept the vaccination for their sons, the main motivation being the fact that parents considered protecting their sons from HPV-related diseases highly important. Of the 161 boys

  20. Measuring Technology Acceptance Level of Teachers by Using Unified Theory of Acceptance and Use of Technology

    Directory of Open Access Journals (Sweden)

    Eylem KORAL GÜMÜŞOĞLU

    2017-12-01

    Full Text Available Technology has undergone a lot of radical changes in the last years which has caused the implemention of new paradigms in different sectors. It is almost impossible for education not to be affected from this change in technology. It has shifted from the traditional applications to the technology use in the classrooms. In this case, teachers’ role in the application of technology into education has become an essential part of the research in the field. Also, in higher education, teachers become the key factors to the effective use of technology in the teaching and learning processes. Thus, teachers’ technology acceptance level remains an important issue. The term, technology acceptance refers to the adoption and use of technologies in the way they were designed for. The purpose of this study is to examine the technology acceptance level of teachers at Anadolu University School of Foreign Languages to test the Unified Theory of Acceptance and Use of Technology (UTAUT that determines the variables influencing individuals’ technology acceptance. Firstly, a Likert scale type of scale was administered to measure UTAUT and the attitudes of teachers towards technology. The participants are the 44 lecturers who have started using technology recently at Anadolu University School of Foreign Languages. The findings reveal that the overall technology acceptance level of participants is average.

  1. Anesthesiologists' perceptions of minimum acceptable work habits of nurse anesthetists.

    Science.gov (United States)

    Logvinov, Ilana I; Dexter, Franklin; Hindman, Bradley J; Brull, Sorin J

    2017-05-01

    Work habits are non-technical skills that are an important part of job performance. Although non-technical skills are usually evaluated on a relative basis (i.e., "grading on a curve"), validity of evaluation on an absolute basis (i.e., "minimum passing score") needs to be determined. Survey and observational study. None. None. The theme of "work habits" was assessed using a modification of Dannefer et al.'s 6-item scale, with scores ranging from 1 (lowest performance) to 5 (highest performance). E-mail invitations were sent to all consultant and fellow anesthesiologists at Mayo Clinic in Florida, Arizona, and Minnesota. Because work habits expectations can be generational, the survey was designed for adjustment based on all invited (responding or non-responding) anesthesiologists' year of graduation from residency. The overall mean±standard deviation of the score for anesthesiologists' minimum expectations of nurse anesthetists' work habits was 3.64±0.66 (N=48). Minimum acceptable scores were correlated with the year of graduation from anesthesia residency (linear regression P=0.004). Adjusting for survey non-response using all N=207 anesthesiologists, the mean of the minimum acceptable work habits adjusted for year of graduation was 3.69 (standard error 0.02). The minimum expectations for nurse anesthetists' work habits were compared with observational data obtained from the University of Iowa. Among 8940 individual nurse anesthetist work habits scores, only 2.6% were habits scores were significantly greater than the Mayo estimate (3.69) for the minimum expectations; all Phabits of nurse anesthetists within departments should not be compared with an appropriate minimum score (i.e., of 3.69). Instead, work habits scores should be analyzed based on relative reporting among anesthetists. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Computer Self-Efficiency as an Antecedent to the Acceptance of Instant Messenger Technology

    OpenAIRE

    Thomas F. Stafford

    2005-01-01

    AOL Instant Messenger (IM) is a widely used Internet chat technology. There are indications that users initially do not find it easy to use, and this concerns AOL management; they consider that if popular applications are not easy to use, the ability of AOL to attract and hold loyal customers will be impeded. In this paper, the acceptance of IM technology is investigated within the familiar framework of the Technology Acceptance Model (TAM), in which ease of use plays a pivotal role in promot...

  3. How to judge acceptance tests on wet cooling towers; Zur Beurteilung von Abnahmeversuchen an Nasskuehltuermen

    Energy Technology Data Exchange (ETDEWEB)

    Wernicke, D.

    1998-12-31

    In a new computer-supported procedure the conventional acceptance parameter `cold water temperature` is considered as an interaction of exchange area and air flow. A consequent application of evaporative cooling theory leads to the definition of a factor describing heat and mass transfer area. This factor is the basis of the new acceptance testing procedure. In comparison to conventional procedures based on tower-specific curve diagrams, the new physically founded acceptance procedure is applicable to a wide range of cooling towers. The division of the overall acceptance parameter into partial acceptance criteria leads to a fundamental increase in the transparency of acceptance tests and permits a thorough analysis of deficiencies as well as effective improvements. (orig.) [Deutsch] Die herkoemmliche Beurteilungsgroesse Kaltwassertemperatur wird in einem neuen, rechnergestuetzten Verfahren der thermischen Abnahme von Nasskuehltuermen als Zusammenspiel von Austauschflaeche und Luftdurchsatz begriffen. Die konsequente Anwendung der Theorie der Verdunstungskuehlung fuehrt zur Definition eines Geometriefaktors als Mass fuer die Austauschflaeche. Dieser bildet die Grundlage der Abnahmebeurteilung. Im Gegensatz zu herkoemmlichen Verfahren mit kuehltumrspezifischen Kennfeldern ist das neue Abnahmeverfahren durch die Anwendung der Theorie der Verdunstungskuehlung umfassend auf die Untersuchung von Nasskuehltuermen anwendbar. Die Aufteilung der thermischen Gesamtgarantie in Teilgarantien fuehrt zu einer wesentlichen Erhoehung der Transparenz der thermischen Abnahme und erlaubt eine eingehende Analyse von Maengeln sowie gezielte Nachbesserungen. (orig.)

  4. Acceptance Threshold: A Bidimensional Research Method for User-Oriented Quality Evaluation Studies

    Directory of Open Access Journals (Sweden)

    S. Jumisko-Pyykkö

    2008-01-01

    Full Text Available Subjective quality evaluation is widely used to optimize system performance as a part of end-products. It is often desirable to know whether a certain system performance is acceptable, that is, whether the system reaches the minimum level to satisfy user expectations and needs. The goal of this paper is to examine research methods for assessing overall acceptance of quality in subjective quality evaluation methods. We conducted three experiments to develop our methodology and test its validity under heterogeneous stimuli in the context of mobile television. The first experiment examined the possibilities of using a simplified continuous assessment method for assessing overall acceptability. The second experiment explored the boundary between acceptable and unacceptable quality when the stimuli had clearly detectable differences. The third experiment compared the perceived quality impacts of small differences between the stimuli close to the threshold of acceptability. On the basis of our results, we recommend using a bidimensional retrospective measure combining acceptance and satisfaction in consumer-/user-oriented quality evaluation experiments.

  5. Standardizing Navigation Data: A Status Update

    Science.gov (United States)

    VanEepoel, John M.; Berry, David S.; Pallaschke, Siegmar; Foliard, Jacques; Kiehling, Reinhard; Ogawa, Mina; Showell, Avanaugh; Fertig, Juergen; Castronuovo, Marco

    2007-01-01

    This paper presents the work of the Navigation Working Group of the Consultative Committee for Space Data Systems (CCSDS) on development of standards addressing the transfer of orbit, attitude and tracking data for space objects. Much progress has been made since the initial presentation of the standards in 2004, including the progression of the orbit data standard to an accepted standard, and the near completion of the attitude and tracking data standards. The orbit, attitude and tracking standards attempt to address predominant parameterizations for their respective data, and create a message format that enables communication of the data across space agencies and other entities. The messages detailed in each standard are built upon a keyword = value paradigm, where a fixed list of keywords is provided in the standard where users specify information about their data, and also use keywords to encapsulate their data. The paper presents a primer on the CCSDS standardization process to put in context the state of the message standards, and the parameterizations supported in each standard, then shows examples of these standards for orbit, attitude and tracking data. Finalization of the standards is expected by the end of calendar year 2007.

  6. PUBLISHER'S ANNOUNCEMENT: Refereeing standards

    Science.gov (United States)

    Bender, C.; Scriven, N.

    2004-08-01

    Wuppertal, Germany (Chaotic and Complex Systems); F W Nijhoff, University of Leeds, UK (Mathematical Physics); G Ghirardi, Universita di Trieste, Italy (Quantum Mechanics and Quantum Information Theory); G Dunne, University of Connecticut, Storrs, USA (Classical and Quantum Field Theory); and L Turner, Los Alamos National Laboratory, NM, USA (Fluid and Plasma Theory). It will be an honour and a pleasure to work together with all these talented people towards the high-minded goal of running a world-class scientific journal. As Editor-in-Chief of J. Phys. A, my principal objective will be to raise the standards of this first-rate journal to even higher levels by raising the quality of accepted papers. I believe that this goal will be possible to accomplish. Despite an already high rejection rate, paper submissions are rising rapidly and I anticipate that we will need to be even more stringent in our assessment of quality next year. A letter has already been sent to referees urging them to raise their standards for acceptance. I believe we will make rapid progress in this direction. (I have heard a few people criticize the journal for being a `write-only' journal. My goal is for the worldwide community of mathematical physicists to view J. Phys. A as essential reading.) I am extremely optimistic about the future of J. Phys. A. I believe that we will raise the standards of acceptance while maintaining the short time from submission to decision. I am confident that we will continue to improve the quality of the papers published in this already first-class journal. I look forward to working with the journal's excellent staff, the Board of Editors, and the Advisory Panel.

  7. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    Energy Technology Data Exchange (ETDEWEB)

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-02-25

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management.

  8. Type of speech material affects Acceptable Noise Level test outcome

    Directory of Open Access Journals (Sweden)

    Xaver eKoch

    2016-02-01

    Full Text Available The Acceptable Noise Level (ANL test, in which individuals indicate what level of noise they are willing to put up with while following speech, has been used to guide hearing aid fitting decisions and has been found to relate to prospective hearing aid use. Unlike objective measures of speech perception ability, ANL outcome is not related to individual hearing loss or age, but rather reflects an individual's inherent acceptance of competing noise while listening to speech. As such, the measure may predict aspects of hearing aid success. Crucially, however, recent studies have questioned its repeatability (test-retest reliability. The first question for this study was whether the inconsistent results regarding the repeatability of the ANL test may be due to differences in speech material types used in previous studies. Second, it is unclear whether meaningfulness and semantic coherence of the speech modify ANL outcome. To investigate these questions, we compared ANLs obtained with three types of materials: the International Speech Test Signal (ISTS, which is non-meaningful and semantically non-coherent by definition, passages consisting of concatenated meaningful standard audiology sentences, and longer fragments taken from conversational speech. We included conversational speech as this type of speech material is most representative of everyday listening. Additionally, we investigated whether ANL outcomes, obtained with these three different speech materials, were associated with self-reported limitations due to hearing problems and listening effort in everyday life, as assessed by a questionnaire. ANL data were collected for 57 relatively good-hearing adult participants with an age range representative for hearing aid users. Results showed that meaningfulness, but not semantic coherence of the speech material affected ANL. Less noise was accepted for the non-meaningful ISTS signal than for the meaningful speech materials. ANL repeatability was

  9. The LOFT wide field monitor

    DEFF Research Database (Denmark)

    Brandt, Søren; Hernanz, M.; Alvarez, L.

    2012-01-01

    be able to address fundamental questions about strong gravity in the vicinity of black holes and the equation of state of nuclear matter in neutron stars. The prime goal of the WFM will be to detect transient sources to be observed by the LAD. However, with its wide field of view and good energy...... to the community of ~100 gamma ray burst positions per year with a ~1 arcmin location accuracy within 30 s of the burst. This paper provides an overview of the design, configuration, and capabilities of the LOFT WFM instrument....

  10. Acceptance as a Mediator for Change in Acceptance and Commitment Therapy for Persons with Chronic Pain?

    Science.gov (United States)

    Cederberg, Jenny Thorsell; Cernvall, Martin; Dahl, JoAnne; von Essen, Louise; Ljungman, Gustaf

    2016-02-01

    Cognitive behavior therapy (CBT) is considered effective for chronic pain, but little is known about active treatment components. Although acceptance correlates with better health outcomes in chronic pain patients, no study has examined its mediating effect in an experimental design. The aim of the present study is to investigate acceptance as a mediator in acceptance and commitment therapy (ACT), a third wave CBT intervention, for chronic pain. A bootstrapped cross product of coefficients approach was used on data from a previously published RCT evaluating ACT for chronic pain. To address the specificity of acceptance as a mediator, anxiety and depression were also tested as mediators. Outcome variables were satisfaction with life and physical functioning. Two change scores, pre-assessment to 6-month follow-up (n = 53) and pre-assessment to 12-month follow-up (n = 32), were used. Acceptance was found to mediate the effect of treatment on change in physical functioning from pre-assessment to follow-up at 6 months. Further, a trend was shown from pre-assessment to follow-up at 12 months. No indirect effect of treatment via acceptance was found for change in satisfaction with life. This study adds to a small but growing body of research using mediation analysis to investigate mediating factors in the treatment of chronic pain. In summary, the results suggest that acceptance may have a mediating effect on change in physical functioning in ACT for persons with chronic pain. However, given the small sample size of the study, these findings need to be replicated.

  11. First world-wide interlaboratory study on polybrominated diphenylethers (PBDEs)

    NARCIS (Netherlands)

    Boer, de J.; Cofino, W.P.

    2002-01-01

    The first world-wide interlaboratory study on PBDEs, organised between November 1999 and April 2000, involved five biological samples, two sediments and two standard solutions. These materials were sent to 26 participants in nine different countries. Results were returned from 18 laboratories. The

  12. The Perspective Effect of Wide-Angle Lenses in Laparoscopes

    NARCIS (Netherlands)

    Wentink, M.; Fischer, H.; Dankelman, J.; Stassen, L.P.S.; Wieringa, P.A.

    2002-01-01

    Purpose: To evaluate the effect of perspective distortion of wide-angle lenses in laparoscopes on hand-eye coordination during endoscopic manipulation. Methods: Sixteen subjects repeatedly performed a standardized positioning task in a pelvi-trainer under two conditions. The subjects had no prior

  13. Wide Field Imager for Athena

    Science.gov (United States)

    Meidinger, Norbert; Nandra, Kirpal; Rau, Arne; Plattner, Markus; WFI proto-Consortium

    2015-09-01

    The Wide Field Imager focal plane instrument on ATHENA will combine unprecedented survey power through its large field of view of 40 arcmin with a high count-rate capability (> 1 Crab). The energy resolution of the silicon sensor is state-of-the-art in the energy band of interest from 0.1 keV to 15 keV. At energy of 6 keV for example, the full width at half maximum of the line shall be not worse than 150 eV until the end of the mission. The performance is accomplished by a set of DEPFET active pixel sensor matrices with a pixel size well suited to the angular resolution of 5 arc sec (on-axis) of the mirror system.Each DEPFET pixel is a combined detector-amplifier structure with a MOSFET integrated onto a fully depleted 450 micron thick silicon bulk. Two different types of DEPFET sensors are planned for the WFI instrument: A set of large-area sensors to cover the physical size of 14 cm x 14 cm in the focal plane and a single gateable DEPFET sensor matrix optimized for the high count rate capability of the instrument. An overview will be given about the presently developed instrument concept and design, the status of the technology development, and the expected performance. An outline of the project organization, the model philosophy as well as the schedule will complete the presentation about the Wide Field Imager for Athena.

  14. Hierarchical analysis of acceptable use policies

    Directory of Open Access Journals (Sweden)

    P. A. Laughton

    2008-01-01

    Full Text Available Acceptable use policies (AUPs are vital tools for organizations to protect themselves and their employees from misuse of computer facilities provided. A well structured, thorough AUP is essential for any organization. It is impossible for an effective AUP to deal with every clause and remain readable. For this reason, some sections of an AUP carry more weight than others, denoting importance. The methodology used to develop the hierarchical analysis is a literature review, where various sources were consulted. This hierarchical approach to AUP analysis attempts to highlight important sections and clauses dealt with in an AUP. The emphasis of the hierarchal analysis is to prioritize the objectives of an AUP.

  15. Development of quantitative risk acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    Griesmeyer, J. M.; Okrent, D.

    1981-01-01

    Some of the major considerations for effective management of risk are discussed, with particular emphasis on risks due to nuclear power plant operations. Although there are impacts associated with the rest of the fuel cycle, they are not addressed here. Several previously published proposals for quantitative risk criteria are reviewed. They range from a simple acceptance criterion on individual risk of death to a quantitative risk management framework. The final section discussed some of the problems in the establishment of a framework for the quantitative management of risk.

  16. Legal nature of acceptance and rejection wand

    OpenAIRE

    DEHGHANI, Asieh; KHOEINI, Ghafoor

    2015-01-01

    Abstract. We must conclude from existing legal articles and research that bequest ownership is not resulting of inherit will (or determination) and ownership does not take place by his satisfaction. The ownership of bequest is enforcement and that is, take place by the law verdict, and inherit determination don’t have interference in it and death die is initialized of it. The major effect of bequest accepts and reject is, in charge of that debts are on the hereditary obligation and remained f...

  17. Acceptability judgments still matter: Deafness and documentation.

    Science.gov (United States)

    Hall, Matthew L; Mayberry, Rachel I; Ferreira, Victor S

    2017-01-01

    The target article's call to end reliance on acceptability judgments is premature. First, it restricts syntactic inquiry to cases were a semantically equivalent alternative is available. Second, priming studies require groups of participants who are linguistically homogenous and whose grammar is known to the researcher. These requirements would eliminate two major research areas: syntactic competence in d/Deaf individuals, and language documentation. (We follow the convention of using deaf to describe hearing levels, Deaf to describe cultural identity, and d/Deaf to include both. Our own work has focused on Deaf signers, but the same concerns could apply to other deaf populations.).

  18. 76 FR 36961 - Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service...

    Science.gov (United States)

    2011-06-24

    ... Utilities Service Electric and Telecommunications Borrowers AGENCY: Rural Utilities Service, USDA. ACTION: Final rule. SUMMARY: The Rural Utilities Service (RUS) is amending its regulations on Electric and... and pole keys, and for quality control and inspection of timber products. RUS is updating these...

  19. 76 FR 12269 - Minimum Standards for Driver's Licenses and Identification Cards Acceptable by Federal Agencies...

    Science.gov (United States)

    2011-03-07

    ... Act for Defense, the Global War on Terror, and Tsunami Relief, 2005, Public Law 109- 13, 119 Stat. 231... the addition of or upgrades to security alarms, doors, or other electronic detection equipment; (2...

  20. 7 CFR 1755.400 - RUS standard for acceptance tests and measurements of telecommunications plant.

    Science.gov (United States)

    2010-01-01

    ... telecommunications plant. 1755.400 Section 1755.400 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS... measurements of telecommunications plant. Sections 1755.400 through 1755.407 cover the requirements for...

  1. Incentives for Organ Donation : Proposed Standards for an Internationally Acceptable System

    NARCIS (Netherlands)

    Matas, Arthur J.; Satel, Sally; Munn, Stephen; Richards, Janet Radcliffe; Tan-Alora, Angeles; Ambagtsheer, Frederike J. A. E.; Asis, Micheal D. H.; Baloloy, Leo; Cole, Edward; Crippin, Jeff; Cronin, David; Daar, Abdallah S.; Eason, James; Fine, Richard; Florman, Sander; Freeman, Richard; Fung, John; Gaertner, Wulf; Gaston, Robert; Ghahramani, Nasrollah; Ghods, Ahad; Goodwin, Michelle; Gutmann, Thomas; Hakim, Nadey; Hippen, Benjamin; Huilgol, Ajit; Kam, Igal; Lamban, Arlene; Land, Walter; Langnas, Alan; Lesaca, Reynaldo; Levy, Gary; Liquette, RoseMarie; Marks, William H.; Miller, Charles; Ona, Enrique; Pamugas, Glenda; Paraiso, Antonio; Peters, Thomas G.; Price, David; Randhawa, Gurch; Reed, Alan; Rigg, Keith; Serrano, Dennis; Sollinger, Hans; Sundar, Sankaran; Teperman, Lewis; van Dijk, Gert; Weimar, Willem; Danguilan, Romina

    Incentives for organ donation, currently prohibited in most countries, may increase donation and save lives. Discussion of incentives has focused on two areas: (1) whether or not there are ethical principles that justify the current prohibition and (2) whether incentives would do more good than

  2. [Scientific standards in parasitology in historical perspective].

    Science.gov (United States)

    Lonc, Elzbieta; Płonka-Syroka, Bozena

    2005-01-01

    An analysis of scientific standards in parasitology was carried out from the perspective of anthropology of knowledge - a new discipline that emerged from non-classical history science in the 1990s. The history of parasitology, its development and limitations, are presented in a broad socio-cultural context, as the answers of scientists to different social needs in historical periods. In parasitological history there are some periods characteristic for all newly emerging disciplines of natural science. The first systematic account of natural phenomena and their interpretations was initiated in the 16th century and continued till the mid 18th century. It was a period when the phenomena could not be explained in a proper way by the existing and accepted theories. The epidemic diseases were one of these phenomena which were interpreted based on ancient ideas, mostly humoral pathology. In the 16th century a new contagium concept of material factors (pathogenes) that could be spread by contact among humans or close association was formed. This hypothesis, however, was not widely accepted because it contradicted the well-established normative concepts in the European academic naturalism. The development of parasitology was stopped because of theoretical barriers and interpretation difficulties (non-materialistic standard of naturalism, humoral pathology and spontaneous theory). In the second half of the 18th century, the theoretical crisis in natural sciences gave a new impulse for many disciplines; among others, parasitology entered in its second stage of development. The collected observations were classified in a new way and in the context of new interpretations. The progress in parasitology was prompted by the intensified urbanization, rapid increase of European population as well as by wars connected with infections and epidemics. It resulted in two competitive research programs (the French and the German). On the basis of the same observations, they advanced

  3. Do recently diagnosed black breast cancer patients find questions about cancer fatalism acceptable? A preliminary report.

    Science.gov (United States)

    Sheppard, Vanessa B; Davis, Kimberly; Boisvert, Marc; Boisvert, Mare; Jennings, Yvonne; Montalvo, Becky

    2011-03-01

    Socio-cultural factors such as cancer fatalism have been understudied in cancer patients. Women from two cancer centers completed a structured phone survey and an open-ended cognitive interview. Socio-cultural variables of fatalism, hope, and spiritual coping were measured using standardized scales. Older women had significantly higher fatalism scores compared to younger women (p Fatalism rates were low. Ratings of hope and collaborative religious coping were high (m = 20, m = 35, respectively). Qualitative comments confirmed the overall low acceptability of the fatalism measures. Further research is needed to identify measures that are acceptable to newly diagnosed patients.

  4. Site acceptance test, W-030 MICON system

    Energy Technology Data Exchange (ETDEWEB)

    Hill, L.F., Westinghouse Hanford

    1996-06-10

    Monitoring and control of the W-030 ventilation upgrade is provided by a distributed control system (DCS) furnished by MICON Corporation. After shipment to the Hanford Site, the site acceptance test (SAT) for this system was conducted in a laboratory environment over a six month period, involving four distinct phases and numerous hardware and software modifications required to correct test exceptions. The final results is a system which is not fully compliant with procurement specifications but is determined to meet minimum Project W-030 safety and functional requirements. A negotiated settlement was reached with the supplier to establish a `path forward` for system implementation. This report documents the `as-run` status of the SAT. The SAT was completed in August of 1995. It was later followed by comprehensive acceptance testing of the W-030 control-logic configuration software; results are documented in WHC-SD-W030-ATR-011. Further testing is reported as part of process system startup operational testing, performed after the MICON installation.

  5. Sexual education in malaysia: accepted or rejected?

    Science.gov (United States)

    Mohd Mutalip, Siti Syairah; Mohamed, Ruzianisra

    2012-01-01

    Introduction to sexual education in schools was suggested by the Malaysian government as one of the effort taken in the aim to reduce the sexual-related social problems among Malaysian teenagers nowadays. This study was proposed in the aim to determine the rate of acceptance among adolescents on the implementation of sexual education in schools. This study was conducted using questionnaires distributed to 152 pre-degree students in Faculty of Pharmacy, Universiti Teknologi MARA (UiTM), Kampus Puncak Alam, Selangor, Malaysia. Obtained data were statistically analyzed. Almost half (49.3%) of the respondents agreed that sexual education might help to overcome the social illness among school teenagers. Besides, a large number (77.6%) of respondents also agreed that this module should be incorporated with other core subjects compare to the feedback received on the implementation of this module on its own (28.9%). These results have provided some insight towards the perception of sexual education among the teenagers. Since most of the respondents agreed with this idea, so it might be a sign that the implementation of sexual education is almost accepted by the adolescents.

  6. Medical Students’ Acceptance of Online Assessment Systems

    Directory of Open Access Journals (Sweden)

    Petrisor Marius

    2016-03-01

    Full Text Available Objective: The increased use of computers in education lead to computerized assessments, especially web-based assessment systems The aim of this study is to evaluate students’ acceptance of being evaluated using an online web-based assessment system. Methods: A transversal study was performed where a sample of students that used and were accustomed to an online assessment system were asked to fill in a short questionnaire and evaluate its use. Results: The questionnaire items responses show students’ preference for online assessment, as opposed to other assessment forms, like oral examination or classical pen and paper examination. Also it is noticeable the increase in the student number that prefer the online assessment as we move up through one year of study to the next. Conclusions: The study revealed a high level of acceptance for the online multiple choice questions test as an assessment method. Students’ opinion is that online tests are better suited for knowledge assessment and are more objective.

  7. Steam generator tube integrity flaw acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    Cochet, B. [FRAMATOME, Paris la Defense (France)

    1997-02-01

    The author discusses the establishment of a flaw acceptance criteria with respect to flaws in steam generator tubing. The problem is complicated because different countries take different approaches to the problem. The objectives in general are grouped in three broad areas: to avoid the unscheduled shutdown of the reactor during normal operation; to avoid tube bursts; to avoid excessive leak rates in the event of an accidental overpressure event. For each degradation mechanism in the tubes it is necessary to know answers to an array of questions, including: how well does NDT testing perform against this problem; how rapidly does such degradation develop; how well is this degradation mechanism understood. Based on the above information it is then possible to come up with a policy to look at flaw acceptance. Part of this criteria is a schedule for the frequency of in-service inspection and also a policy for when to plug flawed tubes. The author goes into a broad discussion of each of these points in his paper.

  8. Acceptability of identification bracelets for hospital inpatients.

    Science.gov (United States)

    Cleopas, A; Kolly, V; Bovier, P A; Garnerin, P; Perneger, T V

    2004-10-01

    To evaluate whether hospitalised patients would agree to wear an identification bracelet and whether patient acceptability is improved by more detailed explanations or by using a code instead of a name on the bracelet. Patient survey that tested two variables in a randomised factorial design. Explanations about identification bracelets were given (a) with or without examples of situations where patient identification may be important, and (b) with the patient name or an anonymous code appearing on the bracelet. Swiss teaching hospital where wearing of identification bracelets was not systematic. Adult patients discharged from hospital (n = 1411). Patients' responses to the questions: (a) should the hospital introduce a compulsory identification bracelet? and (b) would the patient agree to wear such a bracelet? Globally, 83.9% of patients thought that the hospital should introduce bracelets and 90.2% stated that they would agree to wear one. Providing examples increased support for both the hospital policy (87.9% v 79.2%, p<0.001) and personal acceptance (92.2% v 88.1%, p = 0.015). Whether or not the bracelet carried the patient's name or an anonymous code did not influence patient choice. The majority of patients were in favour of wearing an identification bracelet during their hospital stay. This proportion increased significantly when an explanation based on examples of the consequences of incorrect patient identification had been provided.

  9. Assesing the acceptance of the project

    Directory of Open Access Journals (Sweden)

    Clara Fernández-Shaw Toda

    2009-11-01

    Full Text Available OBJECTIVE: Evaluate the acceptability of the project "Adding colour to your unit dose." MATERIAL AND METHODS: It sets in motion a project to reduce errors in the administration of pasting labels with different shapes and colours on blister medicines. It includes the name of the product, the active ingredient, dosage, lot and expiration date. Also included for internal quality control are the initials of the person who made the label and the date and time at which it was made. The nurse monitors the consistency between the data and the label of the drug. After 4 years the external acceptance of the project is analyzed through a satisfaction survey administered to the professionals involved in prescribing and dispensing medicines. RESULTS: 100% of the physicians believed that the project is adequate. Assistants and nurses expressed a dissatisfaction of 58.3% and 26.66% respectively due to the difficulty of extracting the specialty. CONCLUSIONS: - There is agreement on the need to clearly differentiate drugs, which traditional packaging does not resolve while “Adding colour to your unit dose" does. - The pharmacy prepared labels with a flap to facilitate their opening, thereby improving the current system.

  10. Salivary cortisol in response to acute social rejection and acceptance by peers.

    Science.gov (United States)

    Blackhart, Ginette C; Eckel, Lisa A; Tice, Dianne M

    2007-07-01

    Past research indicates that social rejection predicts a wide range of psychological problems (e.g., depression), but laboratory studies examining self-reports of negative affect after social rejection have reported inconsistent results. Salivary cortisol was measured before and after a social rejection/acceptance manipulation for objective assessment of psychological distress subsequent to peer rejection. Rejected participants were predicted to show significantly greater salivary cortisol than accepted or control participants. The present research also examined several factors that may moderate the relationship between acute rejection and cortisol. As predicted, rejected participants exhibited significantly higher cortisol than accepted or control participants. Defensiveness moderated the relationship between rejection and cortisol; highly defensive rejected participants showed significantly lower cortisol than less defensive rejected participants after peer rejection. Results indicate that social rejection causes psychological distress, but highly defensive individuals appear to be less susceptible than less defensive individuals to increases in salivary cortisol after acute social rejection.

  11. Acceptability of Canistel (Lacuma Nervosa A.DC Fruit Flour in Making Cookies

    Directory of Open Access Journals (Sweden)

    Delia A. Paragados

    2014-02-01

    Full Text Available This experimental research determined the acceptability in terms of appearance, aroma, texture, flavor and general acceptability of canistel (Lacuma nervosa A. DC fruit flour in different proportions in making cookies. This study was conducted in December 2011 at West Visayas State University – Calinog Campus, Calinog, Iloilo. Five treatments were used in the study – four of them utilized canistel fruit flour at various proportions and one treatment was used as the control group which utilized all purpose flour. The respondents of the study were the 15 faculty and staff, 15 Food Technology and BSHRM students of WVSU - Calinog Campus, and 15 housewives at Brgy. Simsiman, Calinog, Iloilo who were selected through purposive sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Five Point Hedonic Scale. There were five treatments replicated three times. The statistical tools used were the means, standard deviation, One – Way Analysis of Variance, and the LSD. The .01 alpha level was used as the criterion for acceptance or rejection of the null hypotheses. The study revealed that cookies prepared using all treatments were “liked very much” in terms of appearance, aroma, texture, flavor and general acceptability. While cookies with 100% all - purpose flour were liked moderately by the evaluators. These results led to the conclusion that there is a significant difference that existed in the level of acceptability of canistel fruit flour in making cookies in terms of aroma, texture, flavor and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of canistel fruit flour in making cookies in terms of appearance, therefore the null hypothesis is accepted.

  12. Developing a Stoma Acceptance Questionnaire to improve motivation to adhere to enterostoma self-care.

    Science.gov (United States)

    Bagnasco, A; Watson, R; Zanini, M; Catania, G; Aleo, G; Sasso, L

    2017-06-01

    In stoma care, patient education is often weak in terms of improving patients' level of acceptance of living with a stoma. Self-care educational interventions in enterostomal patients, which according to Orem's Theory should take into account these patients' specific needs, require instruments that measure patients' stoma acceptance to improve motivation based on the resumption of activities they used to carry out before having a stoma. The aim of the study was to develop an instrument that measures the level of stoma acceptance to improve motivation to adhere to enterostoma self-care. Aspects that improve stoma acceptance and consequently motivation to adhere to enterostoma self-care were identified through 10 focus groups. In the focus groups, the motivation indicators were grouped, categorised and results entered into a Stoma Acceptance Questionnaire (SAQ). The SAQ was then piloted with 104 enterostomal patients from three general hospitals. To assess the construct validity of the SAQ, Mokken Scaling was used to explore the latent structure of the SAQ. Mokken scaling is a non-parametric method that falls under the umbrella of methods described as item response theories (IRT). The theme "Living with a stoma"; "Autonomy"; "Support"; "Ability to deal with stoma", plus a common underlying theme: "Stoma acceptance" were dissussed by the Focus Groups. The experts identified the items of the (SAQ) through these themes. Mokken Scaling identified the "resumption of enterostomal patients' normal activities" as a measure of stoma acceptance, thus confirming the construct validity of the SAQ. The tool proposed affords a pioneering example of how this gap can be bridged. Indeed, the SAQ could enable nurses adopting a standardized approach for the assessment of enterostomal patients' motivation to resume their normal activities and identify needs linked to this. The SAQ could also be used to measure the effectiveness of psychosocial and educational interventions aimed at

  13. Standardizing naming conventions in radiation oncology.

    Science.gov (United States)

    Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa; van Vliet-Vroegindeweij, Corine; Brame, Scott; Straube, William; Galvin, James; Tripuraneni, Prabhakar; Michalski, Jeff; Bosch, Walter

    2012-07-15

    nomenclature. Use of standardized naming conventions is important to facilitate comparison of dosimetry across patient datasets. The guidelines presented here will facilitate international acceptance across a wide range of efforts, including groups organizing clinical trials, Radiation Oncology Institute, Dutch Radiation Oncology Society, Integrating the Healthcare Enterprise, Radiation Oncology domain (IHE-RO), and Digital Imaging and Communication in Medicine (DICOM). Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Acceptance Of Internet Banking In Iran: Extension of Technology Acceptance Model (TAM

    Directory of Open Access Journals (Sweden)

    Muhammad Ali Bagheri

    2009-04-01

    Full Text Available In the past several decades, perception of usefulness and ease of use had been the most important factors in recognition of new technologies in the field of information systems. Nevertheless, by themselves, these two factors could not describe user behavior within emerging environments such as the internet banking. From the standpoint of technology acceptance at an individual level, the present paper has expanded the technology acceptance model (TAM by introducing the characteristics of the internet banking environment. In this study, the most important models offered within individual technology acceptance were reviewed and two constructs, perceived self efficacy and confidence in TAM, have been added. A survey method was employed using a questionnaire as a data collection instrument. The sample surveyed was 310 bank customers.

  15. When is a lie acceptable? Work and private life lying acceptance depends on its beneficiary.

    Science.gov (United States)

    Cantarero, Katarzyna; Szarota, Piotr; Stamkou, Eftychia; Navas, Marisol; Dominguez Espinosa, Alejandra Del Carmen

    2017-08-14

    In this article we show that when analyzing attitude towards lying in a cross-cultural setting, both the beneficiary of the lie (self vs other) and the context (private life vs. professional domain) should be considered. In a study conducted in Estonia, Ireland, Mexico, The Netherlands, Poland, Spain, and Sweden (N = 1345), in which participants evaluated stories presenting various types of lies, we found usefulness of relying on the dimensions. Results showed that in the joint sample the most acceptable were other-oriented lies concerning private life, then other-oriented lies in the professional domain, followed by egoistic lies in the professional domain; and the least acceptance was shown for egoistic lies regarding one's private life. We found a negative correlation between acceptance of a behavior and the evaluation of its deceitfulness.

  16. Radical Recentering: Equity in Educational Leadership Standards

    Science.gov (United States)

    Galloway, Mollie K.; Ishimaru, Ann M.

    2015-01-01

    Background: The widely adopted Interstate School Leaders Licensure Consortium standards are designed to guide the preparation and professional development of educational leaders. However, the standards' limited mention of race, class, ethnicity, ability, gender, sexuality, or other marginalized identities suggests that addressing persistent…

  17. Polyfluorinated substances in abiotic standard reference materials

    NARCIS (Netherlands)

    Reiner, J.L.; Blaine, A.C.; Higgins, C.P.; Kwadijk, C.J.A.F.

    2015-01-01

    The National Institute of Standards and Technology (NIST) has a wide range of Standard Reference Materials (SRMs) which have values assigned for legacy organic pollutants and toxic elements. Existing SRMs serve as homogenous materials that can be used for method development, method validation, and

  18. Sensory characteristics and consumer acceptability of decaffeinated green teas.

    Science.gov (United States)

    Lee, S M; Lee, H-S; Kim, K-H; Kim, K-O

    2009-04-01

    Green tea has been widely consumed for its mild flavors and its health benefits, yet caffeine in green tea has been a limitation for those who want to avoid it. The limitation brought increase in need for decaffeinated products in the green tea market. Most of the conventional decaffeination techniques applied in food use organic solvents. However, supercritical carbon dioxide fluid extraction (SC-CO2) method is gaining its intension as one of the future decaffeination methods that overcomes the problems of conventional methods. The purpose of this study was to identify sensory characteristics of decaffeinated green teas applied with SC-CO2 method and to observe the relationship with consumer acceptability to elucidate the potentiality of applying SC-CO2 technique in decaffeinated green tea market. Descriptive analysis was performed on 8 samples: green teas containing 4 caffeine levels (10%, 35%, 60%, and 100%) infused at 2 infusing periods (1 or 2 min). It was found that the SC-CO2 process not only reduced caffeine but also decreased some important features of original tea flavors. Two groups were recruited for consumer acceptability test: one (GP I, N = 52), consuming all types of green teas including hot/cold canned teas; and the other (GP II, N = 40), only consuming the loose type. While GP II liked original green tea the most, GP I liked highly decaffeinated green teas. Although the SC-CO2 method had limitations of losing complex flavors of green teas, it appeared to have future potential in the decaffeinated green tea market within or without the addition of desirable flavors.

  19. What makes nuclear energy (not) acceptable?

    Energy Technology Data Exchange (ETDEWEB)

    Turcanu, C.; Perko, T. [Belgian Nuclear Research Centre (SCK-CEN), Mol (Belgium). Society and Policy Support; Kermisch, C. [Universite Libre de Bruxelles (Belgium). Fonds de la Recherche Scientifique

    2013-08-15

    Higher knowledge has long been hypothesized as leading to better acceptance of nuclear energy, but in the last years other factors such as risk perception and trust in nuclear risk governance were also recognized as key elements. While stakeholder involvement is now fully recognized as a key element for nuclear energy acceptance, there are still questions about the impact of higher knowledge. This paper investigates the relation between knowledge about the nuclear domain, risk perception of nuclear risks, confidence in the management of nuclear technologies, on the one hand, and the attitude towards nuclear energy and opinion about nuclear energy, on the other hand. It also studies the factors that are pleading in favour or against nuclear energy and their relation with the forementioned variables. The study is based on empirical data from a large scale opinion survey in Belgium between 25/05/2011 and 24/06/2011, i.e. the third month after the accident in Fukushima. The sample consisted of 1020 respondents and is representative for the Belgian adult population (18+) with respect to gender, age, region, province, habitat and social class. Our results show that confidence in the safe management of nuclear technologies as well as the perceived strength of the arguments pro/against nuclear are driving factors for people's attitude towards nuclear energy. Higher confidence and stronger adherence to the arguments in favour of nuclear energy lead to higher acceptance. The correlation between knowledge and attitude/opinion towards nuclear energy is statistically significant, but rather low, showing only a weak effect of knowledge on attitudes or opinions about nuclear energy. A weak effect is also observed for risk perception of nuclear risks, lower risk perception leading to a somewhat more positive attitude/opinion about nuclear energy. In the study we also highlight that the main factors seen as pleading in favour or against nuclear energy are the same, both for

  20. The mzQuantML data standard for mass spectrometry-based quantitative studies in proteomics.

    Science.gov (United States)

    Walzer, Mathias; Qi, Da; Mayer, Gerhard; Uszkoreit, Julian; Eisenacher, Martin; Sachsenberg, Timo; Gonzalez-Galarza, Faviel F; Fan, Jun; Bessant, Conrad; Deutsch, Eric W; Reisinger, Florian; Vizcaíno, Juan Antonio; Medina-Aunon, J Alberto; Albar, Juan Pablo; Kohlbacher, Oliver; Jones, Andrew R

    2013-08-01

    The range of heterogeneous approaches available for quantifying protein abundance via mass spectrometry (MS)(1) leads to considerable challenges in modeling, archiving, exchanging, or submitting experimental data sets as supplemental material to journals. To date, there has been no widely accepted format for capturing the evidence trail of how quantitative analysis has been performed by software, for transferring data between software packages, or for submitting to public databases. In the context of the Proteomics Standards Initiative, we have developed the mzQuantML data standard. The standard can represent quantitative data about regions in two-dimensional retention time versus mass/charge space (called features), peptides, and proteins and protein groups (where there is ambiguity regarding peptide-to-protein inference), and it offers limited support for small molecule (metabolomic) data. The format has structures for representing replicate MS runs, grouping of replicates (for example, as study variables), and capturing the parameters used by software packages to arrive at these values. The format has the capability to reference other standards such as mzML and mzIdentML, and thus the evidence trail for the MS workflow as a whole can now be described. Several software implementations are available, and we encourage other bioinformatics groups to use mzQuantML as an input, internal, or output format for quantitative software and for structuring local repositories. All project resources are available in the public domain from the HUPO Proteomics Standards Initiative http://www.psidev.info/mzquantml.

  1. ISS - Enabling Exploration Through Docking Standards

    Science.gov (United States)

    Hatfield, Caris A.

    2011-01-01

    NASA and the ISS partnership are jointly developing a key standard to enable future collaborative exploration. The IDSS is based on flight proven design while incorporating new low impact technology. Low impact technology accommodates a wide range of vehicle contact and capture conditions. This standard will get early demonstration on the ISS. Experience gained here will enable operational experience and the opportunity to refine the standard.

  2. The BonaRes data infrastructure: Recommendations of standards for the different life stages of soil and agricultural research data

    Science.gov (United States)

    Hoffmann, Carsten; Schulz, Sina; Svoboda, Nikolai; Zoarder, Muqit; Eberhardt, Einar; Russell, David; Heinrich, Uwe

    2017-04-01

    Within the research project BonaRes ("Soil as a sustainable resource for the bioeconomy") an infrastructure is being developed to upload, manage, store, and provide the increasing amount of soil and agricultural research data, raw data, and metadata in Germany. Large joint research projects such as BonaRes require rules for data handling. The application and designation of standards, standard methods and widely disseminated and accepted data formats for all stages of data life (from acquisition to provision) is accompanied by a number of advantages for data providers, -managers and -users. Standards enable e.g. an easy data exchange and provision for data re-use, communication with other disciplines, and improve the visibility and accessibility of research activities and results. To harmonize national with international data infrastructures, standards used in the scope of BonaRes should either meet international requirements or be transformable by derivation tools. In the first project phase an overview of standards was compiled including more than 600 relevant norms, directives, exchange formats and code lists. With the collaboration of an international expert consortium we then developed a "Recommendation list Standards" for all project partners and other soil/agricultural data providers. We present and discuss selected recommendations and possible implementations of standards to be used in the BonaRes data infrastructure for data acquisition (e.g. soil description, agronomy), data management (e.g. exchange languages, derivation tools), and data provision (e.g. licenses, geo-data services).

  3. Wheat bread enrichment with hard-to-cook bean extruded flours: nutritional and acceptance evaluation.

    Science.gov (United States)

    Batista, Karla A; Prudêncio, Sandra H; Fernandes, Kátia F

    2011-01-01

    This study describes the enrichment of wheat bread with hard-to-cook black bean (BBEF) and cowpea (CEF) extruded flours. Breads containing 10% BBEF and 10% CEF presented increase of, respectively, 9% and 10% in protein content. In addition the fiber content was 2.6 higher in 10% BBEF bread and 2.2 higher in 10% CEF bread in comparison with standard bread. Despite protein and fiber increasing, the energetic value of substituted breads remained unchanged. An increase in the substitution to 15% resulted in decrease of specific volume and density of the breads. Results of sensory analysis to 10% BBEF bread presented overall appearance scores higher than standard bread and overall flavor acceptance very similar to standard. A total of 10% CEF bread presented similar appearance to those standard bread and 73% overall flavor acceptance. It is interesting to point out that distribution of 10% CEF bread overall flavor scores showed 3 distinct levels of consumer's sensibility. Practical Application: Breads enriched with extruded bean flours presented fiber and protein content improved and a very good consumer's acceptance. These results indicate that extruded bean flours constitute ingredients nutritionally and economically viable for technological application in breads elaboration, conferring improvement of nutritional characteristics without changing sensory attributes.

  4. Acceptance and change: the dialectic of recovery.

    Science.gov (United States)

    Cunningham, Kiran; Wolbert, Randy; Graziano, Alana; Slocum, Julia

    2005-01-01

    While a good deal of research has been conducted on the factors associated with recovery, we still need a clearer understanding of the dialectic between behavior and attitude. This research uses semi-structured interviews with two groups of mental health consumers, one receiving more intensive ACT services and the other receiving less intensive case management services, to ascertain the illness management strategies used by those who have been transferred to less intensive services. Our research suggests that while engaging in community, vocational, and church activities are important, those who are further along the road to recovery have gained an understanding and acceptance of their illness that allow them to use these activities as effective illness management strategies.

  5. European consumers' acceptance of beef processing technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    2010-01-01

    quality; 4) marinating by submerging aiming for increased eating quality; 5) nutritional enhancement and restructuring through enzyme binding; 6) shock wave treatment and 7) thermal processing. Participants' attitudes towards beef, their innovativeness and risk aversion were also assessed. In total, 65......' beef were considered negative outcomes of technological innovations. Beef processing technologies were predominantly perceived as valuable options for convenience shoppers and less demanding consumers. Overall, respondents supported the development of 'non-invasive' technologies that were able......The use of new technologies in beef production chains may affect consumers' opinion of meat products. A qualitative study was performed to investigate consumers' acceptance of seven beef processing technologies: marinating by injection aiming for increased 1) healthiness; 2) safety; and 3) eating...

  6. KNOWLEDGE AND ACCEPTANCE OF RFID TRACEABILITY SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Zoltan KATO

    2014-06-01

    Full Text Available In recent years the food market has become highly dynamic. Food crises in the early 90's, or those of the recent years, such as avian flu pandemic, swine flu, the cucumber or horse meat crises all had a negative impact on the Romanian food industry. Food deficiencies have led not only to contamination but also to the illness or death of some consumers. The products traceability is a prerequisite for success in the food industry. As a modern solution, RFID technology can be useful for traceability applications made with rewritable passive RFID tags. This paper aims to examine how RFID technology can be useful for traceability applications and will submit a diligent search regarding the degree of knowledge of RFID technology and the acceptance of an empirical model by the employees of Romanian companies.

  7. Engineering clostridium strain to accept unmethylated DNA.

    Directory of Open Access Journals (Sweden)

    Hongjun Dong

    Full Text Available It is difficult to genetically manipulate the medically and biotechnologically important genus Clostridium due to the existence of the restriction and modification (RM systems. We identified and engineered the RM system of a model clostridial species, C. acetobutylicum, with the aim to allow the host to accept the unmethylated DNA efficiently. A gene CAC1502 putatively encoding the type II restriction endonuclease Cac824I was identified from the genome of C. acetobutylicum DSM1731, and disrupted using the ClosTron system based on group II intron insertion. The resulting strain SMB009 lost the type II restriction endonuclease activity, and can be transformed with unmethylated DNA as efficiently as with methylated DNA. The strategy reported here makes it easy to genetically modify the clostridial species using unmethylated DNA, which will help to advance the understanding of the clostridial physiology from the molecular level.

  8. Design analysis of the standard necessity examination model

    OpenAIRE

    Oura, Jun

    2005-01-01

    In a real businness environment, a lot of kinds of standards exist. Some of the standards are widely used, but on the other hand, some are not used at all. This causes not only waste of resources but also avoiding growth of industries. This paper shows the structure of standard and gives the framework to develop effective standard with Drama Theoritical approach.

  9. Establishing Standards on Colors from Natural Sources.

    Science.gov (United States)

    Simon, James E; Decker, Eric A; Ferruzzi, Mario G; Giusti, M Monica; Mejia, Carla D; Goldschmidt, Mark; Talcott, Stephen T

    2017-11-01

    Color additives are applied to many food, drug, and cosmetic products. With up to 85% of consumer buying decisions potentially influenced by color, appropriate application of color additives and their safety is critical. Color additives are defined by the U.S. Federal Food, Drug, and Cosmetic Act (FD&C Act) as any dye, pigment, or substance that can impart color to a food, drug, or cosmetic or to the human body. Under current U.S. Food and Drug Administration (FDA) regulations, colors fall into 2 categories as those subject to an FDA certification process and those that are exempt from certification often referred to as "natural" colors by consumers because they are sourced from plants, minerals, and animals. Certified colors have been used for decades in food and beverage products, but consumer interest in natural colors is leading market applications. However, the popularity of natural colors has also opened a door for both unintentional and intentional economic adulteration. Whereas FDA certifications for synthetic dyes and lakes involve strict quality control, natural colors are not evaluated by the FDA and often lack clear definitions and industry accepted quality and safety specifications. A significant risk of adulteration of natural colors exists, ranging from simple misbranding or misuse of the term "natural" on a product label to potentially serious cases of physical, chemical, and/or microbial contamination from raw material sources, improper processing methods, or intentional postproduction adulteration. Consistent industry-wide safety standards are needed to address the manufacturing, processing, application, and international trade of colors from natural sources to ensure quality and safety throughout the supply chain. © 2017 Institute of Food Technologists®.

  10. Grazing function g and collimation angular acceptance

    Directory of Open Access Journals (Sweden)

    Stephen G. Peggs

    2009-11-01

    Full Text Available The grazing function g is introduced—a synchrobetatron optical quantity that is analogous (and closely connected to the Twiss and dispersion functions β, α, η, and η^{′}. It parametrizes the rate of change of total angle with respect to synchrotron amplitude for grazing particles, which just touch the surface of an aperture when their synchrotron and betatron oscillations are simultaneously (in time at their extreme displacements. The grazing function can be important at collimators with limited acceptance angles. For example, it is important in both modes of crystal collimation operation—in channeling and in volume reflection. The grazing function is independent of the collimator type—crystal or amorphous—but can depend strongly on its azimuthal location. The rigorous synchrobetatron condition g=0 is solved, by invoking the close connection between the grazing function and the slope of the normalized dispersion. Propagation of the grazing function is described, through drifts, dipoles, and quadrupoles. Analytic expressions are developed for g in perfectly matched periodic FODO cells, and in the presence of β or η error waves. These analytic approximations are shown to be, in general, in good agreement with realistic numerical examples. The grazing function is shown to scale linearly with FODO cell bend angle, but to be independent of FODO cell length. The ideal value is g=0 at the collimator, but finite nonzero values are acceptable. Practically achievable grazing functions are described and evaluated, for both amorphous and crystal primary collimators, at RHIC, the SPS (UA9, the Tevatron (T-980, and the LHC.

  11. Acceptance model of a Hospital Information System.

    Science.gov (United States)

    Handayani, P W; Hidayanto, A N; Pinem, A A; Hapsari, I C; Sandhyaduhita, P I; Budi, I

    2017-03-01

    The purpose of this study is to develop a model of Hospital Information System (HIS) user acceptance focusing on human, technological, and organizational characteristics for supporting government eHealth programs. This model was then tested to see which hospital type in Indonesia would benefit from the model to resolve problems related to HIS user acceptance. This study used qualitative and quantitative approaches with case studies at four privately owned hospitals and three government-owned hospitals, which are general hospitals in Indonesia. The respondents involved in this study are low-level and mid-level hospital management officers, doctors, nurses, and administrative staff who work at medical record, inpatient, outpatient, emergency, pharmacy, and information technology units. Data was processed using Structural Equation Modeling (SEM) and AMOS 21.0. The study concludes that non-technological factors, such as human characteristics (i.e. compatibility, information security expectancy, and self-efficacy), and organizational characteristics (i.e. management support, facilitating conditions, and user involvement) which have level of significance of pgovernment-owned hospitals. Based on the results of this study, hospital management and IT developers should have more understanding on the non-technological factors to better plan for HIS implementation. Support from management is critical to the sustainability of HIS implementation to ensure HIS is easy to use and provides benefits to the users as well as hospitals. Finally, this study could assist hospital management and IT developers, as well as researchers, to understand the obstacles faced by hospitals in implementing HIS. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. Big data analytics: does organizational factor matters impact technology acceptance?

    National Research Council Canada - National Science Library

    Brock, Vitor; Khan, Habib Ullah

    2017-01-01

    Ever since the emergence of big data concept, researchers have started applying the concept to various fields and tried to assess the level of acceptance of it with renown models like technology acceptance model (TAM) and it variations...

  13. The social acceptance of artificial photosynthesis: towards a conceptual framework

    National Research Council Canada - National Science Library

    Sovacool, Benjamin K; Gross, Allan

    2015-01-01

    ... it may struggle. Drawn from work looking at the barriers and acceptance of solar photovoltaic and wind energy systems, the article proposes that social acceptance has multiple dimensions-socio-political, community...

  14. Implementation of a formal in-training assessment programme in anaesthesiology and preliminary results of acceptability

    DEFF Research Database (Denmark)

    Ringsted, C; Østergaard, D; van der Vleuten, C P M

    2003-01-01

    in anaesthesiology developed by a working group under the Danish Society of Anaesthesiology and Intensive Care Medicine. METHODS: A questionnaire about the implementation of the programme in practice and the characteristics of the trainees was sent to the educational responsible consultant (ERC) in each of the 26...... programme has been widely implemented across the country. The majority of the programme was acceptable to trainees and had a positive effect on structuring training and on fostering learning. Udgivelsesdato: 2003-Nov...

  15. VAMOS: A variable mode high acceptance spectrometer for identifying reaction products induced by SPIRAL beams

    CERN Document Server

    Savajols, H

    2003-01-01

    The study of reactions induced by the SPIRAL beams at GANIL requires new techniques: the low intensity of secondary beams implies the need of a very high efficiency detection system; the study of nearly or completely unknown nuclei, over a wide range of masses and energies, needs a very efficient method for attributing a reaction product to a nucleus. The variable mode high acceptance spectrometer VAMOS is being designed and built especially for this purpose.

  16. Wide spectral band beam analysis

    Science.gov (United States)

    Aharon, Oren

    2015-03-01

    The reality in laser beam profiling is that measurements are performed over a wide spectrum of wavelengths and power ranges. Many applications use multiple laser wavelengths with very different power levels, a fact which dictates a need for a better measuring tool. Rapid progress in the fiber laser area has increased the demand for lasers in the wavelength range of 900 - 1030 nm, while the telecommunication market has increased the demand for wavelength range of 1300nm - 1600 nm, on the other hand the silicone chip manufacturing and mass production requirements tend to lower the laser wavelength towards the 190nm region. In many cases there is a need to combine several lasers together in order to perform a specific task. A typical application is to combine one visible laser for pointing, with a different laser for material processing with a very different wavelength and power level. The visible laser enables accurate pointing before the second laser is operated. The beam profile of the intensity distribution is an important parameter that indicates how a laser beam will behave in an application. Currently a lab, where many different lasers are used, will find itself using various laser beam profilers from several vendors with different specifications and accuracies. It is the propose of this article to present a technological breakthrough in the area of detectors, electronics and optics allowing intricate measurements of lasers with different wavelength and with power levels that vary many orders of magnitude by a single beam profiler.

  17. Wide area continuous offender monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Hoshen, J. [Lucent Technologies (United States); Drake, G. [New Mexico Dept. of Corrections, Santa Fe, NM (United States); Spencer, D. [Sandia National Labs., Albuquerque, NM (United States)

    1996-11-01

    The corrections system in the U.S. is supervising over five million offenders. This number is rising fast and so are the direct and indirect costs to society. To improve supervision and reduce the cost of parole and probation, first generation home arrest systems were introduced in 1987. While these systems proved to be helpful to the corrections system, their scope is rather limited because they only cover an offender at a single location and provide only a partial time coverage. To correct the limitations of first-generation systems, second-generation wide area continuous electronic offender monitoring systems, designed to monitor the offender at all times and locations, are now on the drawing board. These systems use radio frequency location technology to track the position of offenders. The challenge for this technology is the development of reliable personal locator devices that are small, lightweight, with long operational battery life, and indoors/outdoors accuracy of 100 meters or less. At the center of a second-generation system is a database that specifies the offender`s home, workplace, commute, and time the offender should be found in each. The database could also define areas from which the offender is excluded. To test compliance, the system would compare the observed coordinates of the offender with the stored location for a given time interval. Database logfiles will also enable law enforcement to determine if a monitored offender was present at a crime scene and thus include or exclude the offender as a potential suspect.

  18. Towards the single european EMC defence standard AECTP 250-500, and planned updates

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes

    2013-01-01

    The European Commission is supporting one European wide defence (equipment) market, and national standards are preventing such a European-wide approach. Therefore the European Standardisation organisation CEN was asked to create an organisation to rationalize standards for defence procurement.

  19. An investigation of the efficacy of acceptance-based behavioral therapy for academic procrastination.

    Science.gov (United States)

    Glick, Debra M; Orsillo, Susan M

    2015-04-01

    Procrastination among college students is both prevalent and troublesome, harming both academic performance and physical health. Unfortunately, no "gold standard" intervention exists. Research suggests that psychological inflexibility may drive procrastination. Accordingly, interventions using acceptance and mindfulness methods to increase psychological flexibility may decrease procrastination. This study compared time management and acceptance-based behavioral interventions. College students' predictions of how much assigned reading they should complete were compared to what they did complete. Procrastination, anxiety, psychological flexibility, and academic values were also measured. Although a trend suggested that time management intervention participants completed more reading, no group differences in procrastination were revealed. The acceptance-based behavioral intervention was most effective for participants who highly valued academics. Clinical implications and future research are discussed. (c) 2015 APA, all rights reserved).

  20. User Acceptance of Long-Term Evolution (LTE) Services: An Application of Extended Technology Acceptance Model

    Science.gov (United States)

    Park, Eunil; Kim, Ki Joon

    2013-01-01

    Purpose: The aim of this paper is to propose an integrated path model in order to explore user acceptance of long-term evolution (LTE) services by examining potential causal relationships between key psychological factors and user intention to use the services. Design/methodology/approach: Online survey data collected from 1,344 users are analysed…

  1. User Acceptance of YouTube for Procedural Learning: An Extension of the Technology Acceptance Model

    Science.gov (United States)

    Lee, Doo Young; Lehto, Mark R.

    2013-01-01

    The present study was framed using the Technology Acceptance Model (TAM) to identify determinants affecting behavioral intention to use YouTube. Most importantly, this research emphasizes the motives for using YouTube, which is notable given its extrinsic task goal of being used for procedural learning tasks. Our conceptual framework included two…

  2. Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

    Science.gov (United States)

    Yousif, Wael K.

    2010-01-01

    This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

  3. Impacts of monetary incentive measures on the acceptability for intelligent speed adaptation (ISA)

    Science.gov (United States)

    Matsuo, Kojiro; Sugihara, Mitsuru; Yamazaki, Motohiro; Mimura, Yasuhiro; Kanno, Komei; Sugiki, Nao

    2017-10-01

    In Japan, Mandatory Intelligent Speed Adaptation (ISA) or Voluntary ISA could be a new paradigm for urban driving speed management such as traffic calming in community streets, once it is widely disseminated. This study aims to analyze the impacts of various monetary incentive measures and individual attributes on the acceptability for several ISA installation. We conducted a stated preference (SP) surveys for the subjects who had attended in a 5-month Advisory ISA field experiment. Then we applied disaggregate model analyses to the response data. The main results were: that the acceptability for Advisory ISA is highest followed by Voluntary ISA and then Mandatory ISA; that the acceptability for ISA that operates only on community streets is high; that the acceptability becomes higher as the age of the subjects becomes higher; and that the acceptability becomes higher as the amount of the monetary incentive becomes greater, but the marginal effect becomes lower. In conclusions, the monetary incentive measures for disseminating Voluntary ISA seems to be practical.

  4. DICOM index tracker enterprise: advanced system for enterprise-wide quality assurance and patient safety monitoring

    Science.gov (United States)

    Zhang, Min; Pavlicek, William; Panda, Anshuman; Langer, Steve G.; Morin, Richard; Fetterly, Kenneth A.; Paden, Robert; Hanson, James; Wu, Lin-Wei; Wu, Teresa

    2015-03-01

    DICOM Index Tracker (DIT) is an integrated platform to harvest rich information available from Digital Imaging and Communications in Medicine (DICOM) to improve quality assurance in radiology practices. It is designed to capture and maintain longitudinal patient-specific exam indices of interests for all diagnostic and procedural uses of imaging modalities. Thus, it effectively serves as a quality assurance and patient safety monitoring tool. The foundation of DIT is an intelligent database system which stores the information accepted and parsed via a DICOM receiver and parser. The database system enables the basic dosimetry analysis. The success of DIT implementation at Mayo Clinic Arizona calls for the DIT deployment at the enterprise level which requires significant improvements. First, for geographically distributed multi-site implementation, the first bottleneck is the communication (network) delay; the second is the scalability of the DICOM parser to handle the large volume of exams from different sites. To address this issue, DICOM receiver and parser are separated and decentralized by site. To facilitate the enterprise wide Quality Assurance (QA), a notable challenge is the great diversities of manufacturers, modalities and software versions, as the solution DIT Enterprise provides the standardization tool for device naming, protocol naming, physician naming across sites. Thirdly, advanced analytic engines are implemented online which support the proactive QA in DIT Enterprise.

  5. Technical Evaluation Report 60: The World-Wide Inaccessible Web, Part 1: Browsing

    Directory of Open Access Journals (Sweden)

    Batchuluun Batpurev

    2007-06-01

    Full Text Available Two studies are reported, comparing the browser loading times of webpages created using common Web development techniques. The loading speeds were estimated in 12 Asian countries by members of the PANdora network, funded by the International Development Research Centre (IDRC to conduct collaborative research in the development of effective distance education (DE practices. An online survey tool with stopwatch-type counter was used. Responses were obtained from Bhutan, Cambodia, India, Indonesia, Laos, Mongolia, the Philippines, Sri Lanka, Pakistan, Singapore, Thailand, and Vietnam. In most of the survey conditions, browser loading times were noted up to four times slower than commonly prescribed as acceptable. Failure of pages to load at all was frequent. The speediest loading times were observed when the online material was hosted locally, and was created either in the Docebo learning management system (LMS, or in the HTML option provided by the Moodle LMS. It is recommended that formative evaluation of this type should become standard practice in the selection and use of online programming techniques, in order to preserve the accessibility of the World-Wide-Web across large geographical distances, as for DE in the developing world.

  6. Nutrient Intake Values for Folate during Pregnancy and Lactation Vary Widely around the World

    Directory of Open Access Journals (Sweden)

    Lisa A. Houghton

    2013-09-01

    Full Text Available Folate is a B-vitamin with particular importance during reproduction due to its role in the synthesis and maintenance of DNA. Folate is well known for its role in preventing neural tube defects (NTDs during the periconceptional period. There is also an increased need for folate throughout pregnancy to support optimal growth and development of the fetus and blood volume expansion and tissue growth of the mother. During lactation, women are at risk of folate deficiency due to increased demands to accommodate milk folate levels. Nutrient Intake Values (NIVs for folate have been calculated to take into account additional needs during pregnancy and lactation. However, these values vary widely between countries. For example, the folate requirement that is set to meet the needs of almost all healthy women during pregnancy varies from 300 µg/day in the United Kingdom to 750 µg/day in Mexico. Currently, there is no accepted standardized terminology or framework for establishing NIVs. This article reviews country-specific NIVs for folate during pregnancy and lactation and the basis for setting these reference values.

  7. User Acceptance Determinants of Information Technology Innovation in Organizations

    OpenAIRE

    Mumtaz Abdul Hameed; Steve Counsell

    2014-01-01

    Several models have been developed for understanding and predicting user acceptance of IT. Research examining the factors influencing IT user acceptance has produced contradictory outcomes. The study presents a meta-analysis of past findings for five determinants of user acceptance of IT. We analysed the relative strength and impact of the relationship between perceived usefulness, perceived ease of use, subjective norms, facilitating conditions and computer self-efficacy for user acceptance ...

  8. Pregnancy planning and acceptance among Danish pregnant women

    DEFF Research Database (Denmark)

    Rasch, V; Knudsen, L B; Wielandt, H

    2001-01-01

    -planners with accepting planners and by comparing rejecting planners with rejecting non-planners. The variables studied comprise age, number of children, partner relationship, education, occupation, economic situation and contraceptives. RESULTS: The characteristics of accepting non-planners and accepting planners were...... be considered appropriate for childbirth. The contraceptive prevalence rate among accepting non-planners was low and might reflect that these women were not entirely against the thought of having a child, although they did not actively plan to have one....

  9. Unit 148 - World Wide Web Basics

    OpenAIRE

    148, CC in GIScience; Yeung, Albert K.

    2000-01-01

    This unit explains the characteristics and the working principles of the World Wide Web as the most important protocol of the Internet. Topics covered in this unit include characteristics of the World Wide Web; using the World Wide Web for the dissemination of information on the Internet; and using the World Wide Web for the retrieval of information from the Internet.

  10. Consumers' acceptance of medicinal herbs: An application of the technology acceptance model (TAM).

    Science.gov (United States)

    Jokar, Nargesh Khatun; Noorhosseini, Seyyed Ali; Allahyari, Mohammad Sadegh; Damalas, Christos A

    2017-07-31

    The shift in consumers' preferences from synthetic to 'natural' products has led to a resurgence of interest in medicinal plants, particularly in developing countries. However, research data about consumers' preferences for particular products is hard to find. The main objective of this study was to contribute to the general understanding of consumers' intention for selecting medicinal herbs for consumption. Factors underpinning consumers' acceptance of medicinal herbs were studied with the technology acceptance model (TAM) in Rasht City of Iran using a structured questionnaire. Most respondents had low to moderate familiarity with consumption of medicinal herbs. However, about half of the respondents (47.5%) showed a high level of acceptance of medicinal herbs. Herbs like spearmint (Mentha spicata L.), spinach (Spinacia oleracea L.), basil (Ocimum basilicum L.), Damask rose (Rosa × damascena Herrm.), saffron (Crocus sativus L.), cinnamon (Cinnamomum verum J.Presl), flixweed [Descurainia sophia (L.) Webb ex Prantl], red feathers (Echium amoenum Fisch. & C.A.Mey.), and green tea [Camellia sinensis (L.) Kuntze] had the highest consumption rate among the majority (over 75%) of citizens of Rasht. The highest rate of perceived usefulness of medicinal herbs was related to their perceived role in healing diseases. The variable of importance of use of medicinal herbs had the strongest direct effect and the variables of perceived usefulness and attitude towards use had the second and third strongest direct effect on the acceptance of medicinal herbs' use at p < 0.01. Findings provide a useful evaluation of the acceptance of medicinal herbs and may serve as a benchmark for future research and evaluation concerning the use of medicinal herbs over time. For plant producers, more effective and targeted crop development should be encouraged, whereas for retailers better marketing and delivery strategies should be sought. Copyright © 2017 Elsevier Ireland Ltd. All rights

  11. 10 CFR 600.311 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Standards for financial management systems. 600.311... Requirements § 600.311 Standards for financial management systems. (a) Recipients are encouraged to use existing financial management systems to the extent that the systems comply with Generally Accepted...

  12. The New ACRL Information Literacy Competency Standards: Revising Reception

    Directory of Open Access Journals (Sweden)

    Benjamin R. Harris

    2013-12-01

    Full Text Available The publication of educational standards inspires a variety of responses---from wholesale acceptance and deployment to criticism and blame. The author of this paper contends that the revision of the ACRL’s Information Literacy Competency Standards for Higher Education must be accompanied by a critical, conscious, and conscientious reception by librarians and information literacy advocates.

  13. The New ACRL Information Literacy Competency Standards: Revising Reception

    OpenAIRE

    Harris, Benjamin R.

    2013-01-01

    The publication of educational standards inspires a variety of responses---from wholesale acceptance and deployment to criticism and blame. The author of this paper contends that the revision of the ACRL’s Information Literacy Competency Standards for Higher Education must be accompanied by a critical, conscious, and conscientious reception by librarians and information literacy advocates.

  14. SEDIMENT TOXICITY ASSESSMENT: COMPARISON OF STANDARD AND NEW TESTING DESIGNS

    Science.gov (United States)

    Standard methods of sediment toxicity testing are fairly well accepted; however, as with all else, evolution of these methods is inevitable. We compared a standard ASTM 10-day amphipod toxicity testing method with smaller, 48- and 96-h test methods using very toxic and reference ...

  15. Standards for the mental health care of people with severe ...

    African Journals Online (AJOL)

    Part one describes conceptual issues underlying the development of South African standards for people with severe psychiatric disorders. Mental health care standards seek to describe what is an acceptable and adequate quality of mental health care for service users. A focus on service quality is especially crucial in ...

  16. 7 CFR 1753.6 - Standards, specifications, and general requirements.

    Science.gov (United States)

    2010-01-01

    .... 1753.6 Section 1753.6 Agriculture Regulations of the Department of Agriculture (Continued) RURAL... General § 1753.6 Standards, specifications, and general requirements. (a) Materials, equipment, and.... Materials and equipment meeting these standards are included on the List of Material Acceptable for Use on...

  17. The New ACRL Information Literacy Competency Standards: Revising Reception

    Science.gov (United States)

    Harris, Benjamin R.

    2013-01-01

    The publication of educational standards inspires a variety of responses, from wholesale acceptance and deployment to criticism and blame. The author of this paper contends that the revision of the ACRL's "Information Literacy Competency Standards for Higher Education" must be accompanied by a critical, conscious, and conscientious…

  18. Social Acceptance of Wind: A Brief Overview (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.

    2015-01-01

    This presentation discusses concepts and trends in social acceptance of wind energy, profiles recent research findings, and discussions mitigation strategies intended to resolve wind power social acceptance challenges as informed by published research and the experiences of individuals participating in the International Energy Agencies Working Group on Social Acceptance of Wind Energy

  19. 20 CFR 229.81 - Refusal to accept vocational rehabilitation.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Refusal to accept vocational rehabilitation... Refusal to accept vocational rehabilitation. The DIB O/M is not payable for any month in which the disabled employee refuses, without good reason, to accept vocational rehabilitation services available...

  20. The dark side of inclusion: Undesired acceptance increases aggression

    NARCIS (Netherlands)

    Greenaway, K.H.; Jetten, J.; Ellemers, Naomi; van Bunderen, L

    It is generally assumed that being accepted by others should have universally positive effects. The present research questions this assumption and shows that acceptance can sometimes arouse aggressive thoughts and feelings when people have a low desire to belong to the accepting group. In Study 1 (N

  1. Exposure to Pornography and Acceptance of Rape Myths.

    Science.gov (United States)

    Allen, Mike; And Others

    1995-01-01

    Summarizes the literature examining the association between acceptance of rape myths and exposure to pornography. States that nonexperimental methodology shows that exposure to pornography does not increase rape myth acceptance, while experimental studies show that exposure to pornography increases rape myth acceptance. Concludes that experimental…

  2. 16 CFR 1505.7 - Maximum acceptable surface temperatures.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Maximum acceptable surface temperatures... ARTICLES INTENDED FOR USE BY CHILDREN Regulations § 1505.7 Maximum acceptable surface temperatures. The maximum acceptable surface temperatures for electrically operated toys shall be as follows: Surface type...

  3. Religiosity, Religious Acceptance, Social Interaction, and Satisfaction with University Experience

    Science.gov (United States)

    Mohebpour, Ida; Reysen, Stephen; Gibson, Shonda; Hendricks, LaVelle

    2017-01-01

    We tested a mediated moderation model with the interaction of students' degree of religiosity and perception of the university environment as accepting of one's religion predicting satisfaction with the university mediated by positive social relations. When the university was perceived as accepting of one's religion (vs less accepting), greater…

  4. Evaluation of User Acceptance of Mixed Reality Technology

    Science.gov (United States)

    Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

    2011-01-01

    This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

  5. Acceptability of surgery as initial treatment for primary open angle ...

    African Journals Online (AJOL)

    One hundred and fifty four new glaucoma patients at the University of Benin Teaching Hospital were interviewed to determine the acceptance of surgery, reasons for refusal, and factors affecting acceptability of surgery as an initial treatment option. Fifty patients (32.5%) accepted surgery while 89 (57.8%) refused. The main ...

  6. Acceptability, Growth Performance and Cost Analysis of Diets ...

    African Journals Online (AJOL)

    Results indicated that enrichment of C. gariepinus fingerlings diets with lipids enhances the acceptability of the diet, the best acceptable diet being olive oil enriched diet. The acceptability of diets enriched with olive oil, cow fat and pig fat were statistically not significantly different. Although, olive oil diets were easily ...

  7. Standards for Standardized Logistic Regression Coefficients

    Science.gov (United States)

    Menard, Scott

    2011-01-01

    Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

  8. Base Civil Engineer Organization: Standardized versus Flexible.

    Science.gov (United States)

    1983-09-01

    have been searching. In fact, many researchers claim that contingency theory is widely accepted, and thus no longer controversial ( Schoonhoven , 1981...surrounds the structural-contingency model, due to the vagueness and lack of clarity with which the model is often stated ( Schoonhoven , 1981; Pennings...Waltham MA, June 1981. ADB062457L. Schoonhoven , C. "Problems with Contingency Theory: Testing Assumptions Hidden in the Language of Contingency Tehory

  9. Continuing dental education on the World Wide Web.

    Science.gov (United States)

    Johnson, Lynn A

    2002-07-01

    Continuing dental education (CDE) courses delivered on the World Wide Web (Web CDE) offer numerous advantages over traditional CDE; however, two major issues--location of suitable courses and course quality--need resolution. Locating high-quality courses is difficult due to the lack of the standardized metadata that allows search engines to match courses to practitioners' needs. Web directories created by professional organizations are beginning to show promise, but require further development. Search engines and Web directories are discussed and improvements currently underway summarized. Course quality remains a highly significant concern. A national effort to create Web CDE course quality standards is underway that includes proposed standards. These proposed standards are summarized and used to comment on the current state of Web CDE courses. Examples are given when possible. Three emerging Web CDE technologies and a look to the future of Web CDE are discussed.

  10. Multifactor dimensionality reduction as a filter based approach for genome wide association studies

    Directory of Open Access Journals (Sweden)

    Noffisat eOki

    2011-11-01

    Full Text Available Advances in genotyping technology and the multitude of data available now provide a vast amount of data that is proving to be useful in the quest for a better understanding of human genetic diseases. This has led to the development of approaches such as genome wide association studies (GWAS designed specifically for interrogating variants across the genome for association with disease, typically by testing single-locus, univariate associations. More recently it has been accepted that epistatic (interaction effects may also be great contributors to these genetic effects, and GWAS methods are now being applied to find epistatic effects. The challenge for these methods still remain in prioritization and interpretation of results, and it has also become standard for initial findings to be independently investigated in replication cohorts or functional studies. This is motivating the development and implementation of filter-based approaches to prioritize variants found to be significant in a discovery stage for follow-up for replication. Such filters must be able to detect both univariate and interactive effects. In the current study we present and evaluate the use of Multifactor Dimensionality Reduction (MDR as such a filter, with simulated data and a wide range of effect sizes. Additionally, we compare the performance of the MDR filter to a similar filter approach using logistic regression (LR, the more traditional approach used in GWAS analysis, as well as Evaporative Cooling (EC-another prominent machine learning filtering method. The results of our simulation study show that MDR is an effective method for such prioritization, and that it can detect main effects, and interactions with or without marginal effects. Importantly, it performed as well as EC and LR for main effect models. It also significantly outperforms LR for various two-locus epistatic models, while it has equivalent results as EC for the epistatic models.

  11. Brief mindfulness meditation training reduces mind wandering: The critical role of acceptance.

    Science.gov (United States)

    Rahl, Hayley A; Lindsay, Emily K; Pacilio, Laura E; Brown, Kirk W; Creswell, J David

    2017-03-01

    Mindfulness meditation programs, which train individuals to monitor their present-moment experience in an open or accepting way, have been shown to reduce mind wandering on standardized tasks in several studies. Here we test 2 competing accounts for how mindfulness training reduces mind wandering, evaluating whether the attention-monitoring component of mindfulness training alone reduces mind wandering or whether the acceptance training component is necessary for reducing mind wandering. Healthy young adults (N = 147) were randomized to either a 3-day brief mindfulness training condition incorporating instruction in both attention monitoring and acceptance, a mindfulness training condition incorporating attention monitoring instruction only, a relaxation training condition, or an active reading-control condition. Participants completed measures of dispositional mindfulness and treatment expectancies before the training session on Day 1 and then completed a 6-min Sustained Attention to Response Task (SART) measuring mind wandering after the training session on Day 3. Acceptance training was important for reducing mind wandering, such that the attention-monitoring plus acceptance mindfulness training condition had the lowest mind wandering relative to the other conditions, including significantly lower mind wandering than the attention-monitoring only mindfulness training condition. In one of the first experimental mindfulness training dismantling studies to-date, we show that training in acceptance is a critical driver of mindfulness-training reductions in mind wandering. This effect suggests that acceptance skills may facilitate emotion regulation on boring and frustrating sustained attention tasks that foster mind wandering, such as the SART. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  12. PUBLIC ACCEPTANCE OF ROAD-USER CHARGING

    Directory of Open Access Journals (Sweden)

    Neil THORPE

    2002-01-01

    Full Text Available This paper focuses upon public attitudes to and public acceptance of road-user charging as an effective means of managing travel demand, with the overall aim of identifying the characteristics of key interest groups, the kinds of attitudes they hold and their preferences for the distribution of the benefits of generated net revenues and released roadspace. It is argued that this knowledge can play a pivotal role in the design of road-user charging systems that satisfy two important criteria – namely, that they are capable of achieving their stated objectives and are generally acceptable to the public. A case-study of three toll-rings used for revenue generation by the Norwegian cities of Bergen, Oslo and Trondheim is selected, where a team of Norwegian interviewers administered a computer-based survey to a total of 756 respondents. Results of the analyses of the attitudinal data collected raise concerns about the approach of introducing initially low levels of road-use charge, designed to have negligible impacts on travel behaviour but to raise revenues to fund necessary improvements to public transport, both to familiarise private car-users with the principles of a pay-as-you-go system of charging and hopefully to reduce levels of public opposition prior to the introduction of the longer term objective of higher charges for traffic restraint. The timescale over which charges are increased may be crucial in terms of balancing a resistance to change in the longer term against the credibility of a system whose objectives are modified in the relatively short-term. The key conclusion from the first Stated Preference exercise is that there is a high degree of consensus among individuals on the importance of investing significant amounts of net revenues in new road infrastructure as well as improved public transport. The second Stated Preference exercise highlights respondents' concerns that the benefits in improved network performance achieved by a

  13. Standards 101: The ASA Standards program

    Science.gov (United States)

    Schomer, Paul

    2004-05-01

    ASA serves as a standards developer under the auspices of the American National Standards Institute (ANSI). The Standards Program is organized through four technical committees (S1, S2, S3, and S12) and one administrative committee (ASACOS). S1 deals with physical acoustics, S2 deals with shock and vibration, S3 deals with physiological and psychological acoustics and S12 deals with noise. ASACOS is the ASA Committee on Standards. The program has three primary tasks: (1) development of national standards (ANSI Standards), (2) national adoption of international standards (ANSI NAIS Standards), (3) providing the USA input to the development of international standards (ISO and IEC Standards). At every level the main work is accomplished in Working Groups (WG) that are staffed by hundreds of volunteers, mainly ASA members from its various technical committees such as Noise, Physical Acoustics, Architectural Acoustics, Physiological and Psychological Acoustics, etc. Overall, the Standards Program involves more ASA members than does any other single function of the society except meetings. It is the biggest outreach function of ASA affecting the health, welfare, and economic well-being of large sectors of society. It is a main way the ASA diffuses the knowledge of acoustics and its practical application, perhaps the main way.

  14. Standards 101; the ASA standards program

    Science.gov (United States)

    Schomer, Paul D.

    2002-11-01

    ASA supports the development of standards by serving as the secretariat for standards committees of the American National Standards Institute (ANSI). The program is organized through four ANSI technical committees (S1, S2, S3, and S12) and one administrative committee (ASACOS). S1 deals with physical acoustics, S2 deals with shock and vibration, S3 deals with physiological and psychological acoustics, and S12 deals with noise. ASACOS is the ASA Committee on Standards. The program has three primary tasks: (1) the development of National Standards (ANSI Standards), (2) the national adoption of an international standard (ANSI NAIS Standards), (3) providing the USA input to the development of International Standards (ISO and IEC Standards). At every level the main work is accomplished in Working Groups (WG) that are ''staffed'' by hundreds of volunteers--mainly ASA members from its various technical committees such as Noise, Physical Acoustics, Architectural Acoustics, Psychological and Physiological Acoustics, etc. Overall, the Standards Program involves more ASA members than does any other single function of the Society except meetings and it is the biggest outreach function of ASA affecting the health, welfare, and economic well-being of large segments of the population, the business and industrial community, and government at all levels.

  15. Improving acceptance for Higgs events at CDF

    Energy Technology Data Exchange (ETDEWEB)

    Sforza, Federico; /INFN, Pisa

    2008-03-01

    The Standard Model of elementary particles predicts the existence of the Higgs boson as the responsable of the electroweak symmetry breaking, the process by which fermions and vector bosons acquire mass. The Higgs existence is one of the most important questions in the present high energy physics research. This work concerns the search of W H associate production at the CDF II experiment (Collider Detector at Fermilab).

  16. Teaching English Accepting Multiple Intelligence Types through Arts

    Directory of Open Access Journals (Sweden)

    Ivana CIMERMANOVÁ

    2013-12-01

    Full Text Available The article discusses the importance of acceptance of the multiple intelligence types as one of the key factor influencing the (language teaching. It focuses mainly on the possibility to introduce art as a source of material for language teaching, providing a wide spectrum of possibilities to introduce different types of activities. The author understands art not only as a source for language teaching/learning but something more than that. For her, the art can be a source for presenting moral and aesthetic values and the material, which will develop learners as a complete personality. The art can bring ethics, culture, history to the language lesson and can help learners to understand the mentality and culture of the target language countr(ies more deeply. The paper is the case study done at the secondary school (1st graders, using some materials and preparing them for achieving the states aim, by the author. This study was a space to learn more about the students’ perception of task based approach, what gave them a chance to experience a shift from ‘teacher-centred’ learning to ‘learner centred’ lesson.

  17. Quality and Acceptability of Meat Nuggets with Fresh Gel

    Directory of Open Access Journals (Sweden)

    V. Rajkumar

    2016-05-01

    Full Text Available Aloe vera has been used worldwide for pharmaceutical, food, and cosmetic industries due to its wide biological activities. However, quality improvement of low fat meat products and their acceptability with added Aloe vera gel (AVG is scanty. The aim of this study was to explore the feasibility of using fresh AVG on physicochemical, textural, sensory and nutritive qualities of goat meat nuggets. The products were prepared with 0%, 2.5%, and 5% fresh AVG replacing goat meat and were analyzed for proximate composition, physicochemical and textural properties, fatty acid profile and sensory parameters. Changes in lipid oxidation and microbial growth of nuggets were also evaluated over 9 days of refrigerated storage. The results showed that AVG significantly (p<0.05 decreased the pH value and protein content of meat emulsion and nuggets. Product yield was affected at 5% level of gel. Addition of AVG in the formulation significantly affected the values of texture profile analysis. The AVG reduced the lipid oxidation and microbial growth in nuggets during storage. Sensory panelists preferred nuggets with 2.5% AVG over nuggets with 5% AVG. Therefore, AVG up to 2.5% level could be used for quality improvement in goat meat nuggets without affecting its sensorial, textural and nutritive values.

  18. Examining the acceptance of and resistance to evolutionary psychology.

    Science.gov (United States)

    Fitzgerald, Carey J; Whitaker, Mitchell B

    2010-06-07

    The field of psychology remains a divided one. Several different sub-disciplines (e.g., developmental, cognitive, behaviorism, social, etc.) form what could be a unified scientific area. However, there is no widely accepted theory of unification. Charles Darwin once theorized that evolutionary theory would change the foundation of psychology; but over the years, evolutionary psychology has been met with hostile resistance from some of the prominent psychologists within the other sub-disciplines. Yet in recent years, all of the divided sub-disciplines of psychology have been slowly implementing evolutionary principles into their literature and research. This slow integration of evolutionary psychology into the other sub-disciplines indicates the possibility of a unified psychology with evolution as its foundation. This paper briefly reviews the literature within each major sub-discipline of psychology to show their implementation of evolutionary psychological theories, indicating the possibility of evolutionary psychology becoming the unifying paradigm upon which the entire field of psychology can be based. A call for action to continue this process is also discussed.

  19. Caregivers’ knowledge and acceptance of complementary and alternative medicine in a tertiary care pediatric hospital

    Directory of Open Access Journals (Sweden)

    Trifa M

    2018-03-01

    Full Text Available Mehdi Trifa,1,2 Dmitry Tumin,1,3 Hina Walia,1 Kathleen L Lemanek,4 Joseph D Tobias,1,3 Tarun Bhalla1,3 1Department of Anesthesiology and Pain Medicine, Nationwide Children’s Hospital, Columbus, OH, USA; 2Faculty of Medicine, University of Tunis El Manar, Tunis, Tunisia; 3Department of Anesthesiology and Pain Medicine, The Ohio State University College of Medicine, Columbus, OH, USA; 4Department of Pediatric Psychology and Neuropsychology, Nationwide Children’s Hospital, Columbus, OH, USA Background: The use of complementary and alternative medicine (CAM therapies has increased in children, especially in those with chronic health conditions. However, this increase may not translate into acceptance of CAM in the perioperative setting. We surveyed caregivers of patients undergoing surgery to determine their knowledge and acceptance of hypnotherapy, acupuncture, and music therapy as alternatives to standard medication in the perioperative period. Materials and methods: An anonymous, 12-question survey was administered to caregivers of children undergoing procedures under general anesthesia. Caregivers reported their knowledge about hypnotherapy, music therapy, and acupuncture and interest in one of these methods during the perioperative period. CAM acceptance was defined as interest in one or more CAM methods.Results: Data from 164 caregivers were analyzed. The majority of caregivers were 20–40 years of age (68% and mothers of the patient (82%. Caregivers were most familiar with acupuncture (70%, followed by music therapy (60% and hypnotherapy (38%. Overall CAM acceptance was 51%. The acceptance of specific CAM modalities was highest for music therapy (50%, followed by hypnotherapy (17% and acupuncture (13%. In multivariable logistic regression, familiarity with music therapy was associated with greater odds of CAM acceptance (odds ratio=3.36; 95% CI: 1.46, 7.74; P=0.004.Conclusion: Overall CAM acceptance among caregivers of children

  20. [User acceptance of health telematics applications].

    Science.gov (United States)

    Schmidt, S; Koch, U

    2005-07-01

    The user acceptance of health telematics in medical care plays a critical role in mediating the success of its implementation. Model assumptions evolving from different fields such as industry, health care and medical psychology are presented, and various perspectives for patients and providers involved in these models are highlighted. The impact of health telematics on health care results from four components: (a) the improvement of work characteristics and communication processes, (b) the enhancement of diagnostic and treatment quality via telematics, (c) technical and economic advantages and (d) communication tools for patient. The evidence concerning clinical, economic and psychosocial criteria within these domains is reviewed according to the published literature. Despite the fact that a considerable benefit of health telematics has been shown in individual studies, the evidence concerning the improvement of health care, the improvement of work and communication processes as well as concerning its clinical and cost effectiveness is still scarce. It is recommended to further integrate health telematics and health service research.

  1. Predicting nurses' acceptance of radiofrequency identification technology.

    Science.gov (United States)

    Norten, Adam

    2012-10-01

    The technology of radiofrequency identification allows for the scanning of radiofrequency identification-tagged objects and individuals without line-of-sight requirements. Healthcare organizations use radiofrequency identification to ensure the health and safety of patients and medical personnel and to uncover inefficiencies. Although the successful implementation of a system incorporating radiofrequency identification technologies requires acceptance and use of the technology, some nurses using radiofrequency identification in hospitals feel like "Big Brother" is watching them. This predictive study used a theoretical model assessing the effect of five independent variables: privacy concerns, attitudes, subjective norms, controllability, and self-efficacy, on a dependent variable, nurses' behavioral intention to use radiofrequency identification. A Web-based questionnaire containing previously validated questions was answered by 106 US RNs. Multiple linear regression showed that all constructs together accounted for 60% of the variance in nurses' intention to use radiofrequency identification. Of the predictors in the model, attitudes provided the largest unique contribution when the other predictors in the model were held constant; subjective norms also provided a unique contribution. Privacy concerns, controllability, and self-efficacy did not provide a significant contribution to nurses' behavioral intention to use radiofrequency identification.

  2. Varied acceptance of clinical trial results.

    Science.gov (United States)

    Klimt, C R

    1989-12-01

    The subject of varied acceptance of clinical trial results is discussed in the context of review of trials with which I have been involved and my subjective evaluation of their impact on the practice of clinical medicine. My experience goes back to 1949 and a World Health Organization trial of hyperimmune gamma globulin against rabies. This was followed by a large trial of secondary prevention of poliomyelitis. I participated in the planning and initiation of the first chronic disease trial, the University Group Diabetes Program (UGDP). The latter lasted for 15 years and its ramifications continue to this day. My next trial was the Coronary Drug Project (CDP), a complex trial with more than 8,000 patients. The trials of aspirin and aspirin combined with persantine (the CDPA, AMIS, PARIS I, and PARIS II) followed. My last three trials were a trial of photocoagulation in diabetic retinopathy (DRS), a six-country trial of the antiarrhythmic drug mexiletine (IMPACT), and a study involving two diagnostic procedures for pulmonary embolism (PIOPED). When one considers, in retrospect, the plethora of trials one is struck by the uniform absence of a priori considerations of the impact on medical practice, or likely lack thereof, of possible outcomes.

  3. Social acceptance of carbon dioxide storage

    Energy Technology Data Exchange (ETDEWEB)

    Huijts, Nicole M.A.; Midden, Cees J.H.; Meijnders, Anneloes L. [Department of Technology Management, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands)

    2007-05-15

    This article discusses public acceptance of carbon capture and storage (CCS). Responses by citizens are described in relation to responses by professionally involved actors. Interviews with members of the government, industry and environmental NGOs showed that these professional actors are interested in starting up storage projects, based on thorough evaluation processes, including discussions on multi-actor working groups. As appeared from a survey among citizens living near a potential storage site (N=103), public attitudes in general were slightly positive, but attitudes towards storage nearby were slightly negative. The general public appeared to have little knowledge about CO{sub 2}-storage, and have little desire for more information. Under these circumstances, trust in the professional actors is particularly important. NGOs were found to be trusted most, and industry least by the general public. Trust in each of the three actors appeared to depend on perceived competence and intentions, which in turn were found to be related to perceived similarity of goals and thinking between trustee and trustor. Implications for communication about CCS are discussed. (author)

  4. Acceptance of forensic imaging in Israel.

    Science.gov (United States)

    Tal, Sigal; Berkovitz, Nadav; Gottlieb, Paul; Zaitsev, Konstantin

    2015-03-01

    Forensic imaging was officially introduced in Israel in 2011. Religious and cultural opposition to autopsies prevails in most of the population of Israel. To examine the extent to which forensic imaging has been accepted as an adjuvant or partial replacement of forensic autopsy, particularly among those opposed to forensic autopsy. The study was conducted in the pediatric population. Data were collected from the National Center of Forensic Medicine and Assaf Harofeh Medical Center during the 18 month period following the introduction of forensic imaging (group A). The data were compared to those of the previous 18 months (group B). The examined parameters were cases submitted, examined, autopsied or imaged depending on family consent. Consent to autopsy was similar in both groups (A = 56% vs. B = 54%). In group A, consent for imaging was 24% of all cases, and of those imaged 77% underwent autopsy. Of those examined externally only, 16% consented to imaging. For 7% of the total cases in group A, estimation of cause of death was based on virtopsy alone. In a country with a high level of religious and cultural opposition to autopsy, it is a challenge to add forensic imaging to the pediatric forensic investigation. Those consenting to forensic imaging are more likely to be those consenting to autopsy. Consent for forensic imaging only was given in 7% of cases. Greater efforts should be invested to educate and inform the public regarding the benefits of virtual autopsy and the importance of data acquired from forensic images.

  5. The temporal dynamics of emotional acceptance: Experience, expression, and physiology.

    Science.gov (United States)

    Dan-Glauser, Elise S; Gross, James J

    2015-05-01

    Emotional acceptance has begun to attract considerable attention from researchers and clinicians alike. It is not yet clear, however, what effects emotional acceptance has on early emotion response dynamics. To address this question, participants (N = 37) were shown emotional pictures and cued either to simply attend to them, or to accept or suppress their emotional responses. Continuous measures of emotion experience, expressive behavior, and autonomic responses were obtained. Results indicated that, compared to no regulation, acceptance led to more positive emotions, transiently enhanced expressivity, and lowered respiratory rate. Compared to suppression, acceptance led to more positive emotions, stronger expressivity, and smaller changes in heart rate, blood pressure, and pulse amplitude, as well as greater oxygenation. Acceptance and suppression thus have opposite effects on emotional response dynamics. Because acceptance enhances positive emotion experience and expression, this strategy may be particularly useful in facilitating social interactions. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. The promise of acceptance as an NGO security management approach.

    Science.gov (United States)

    Fast, Larissa; Freeman, Faith; O'Neill, Michael; Rowley, Elizabeth

    2015-04-01

    This paper explores three questions related to acceptance as a security management approach. Acceptance draws upon relationships with community members, authorities, belligerents and other stakeholders to provide consent for the presence and activities of a non-governmental organisation (NGO), thereby reducing threats from these actors. Little is documented about how NGOs gain and maintain acceptance, how they assess and monitor the presence and degree of acceptance, or how they determine whether acceptance is effective in a particular context. Based on field research conducted in April 2011 in Kenya, South Sudan and Uganda, we address each of these three issues and argue that acceptance must be actively sought as both a programme and a security management strategy. In the paper we delineate elements common to all three contexts as well as missed opportunities, which identify areas that NGOs can and should address as part of an acceptance approach. © 2015 The Author(s). Disasters © Overseas Development Institute, 2015.

  7. Pregnancy planning and acceptance among Danish pregnant women

    DEFF Research Database (Denmark)

    Rasch, V; Knudsen, L B; Wielandt, H

    2001-01-01

    OBJECTIVE: To study how living conditions influence pregnancy planning and acceptance among Danish women. METHOD: A cross-sectional questionnaire study performed among 3516 pregnant women attending Odense University Hospital, Denmark. The study population consisted of women with spontaneous...... abortion, women with ectopic pregnancies, women attending antenatal care and women with induced abortion. They were divided into four groups: women with planned and accepted pregnancies (accepting planners, n=2137), women who accepted an initially unplanned pregnancy (accepting non-planners, n=1006), women...... who rejected an initially planned pregnancy (rejecting planners, n=31), and women with unplanned and rejected pregnancies (rejecting non-planners, n=342). The association between socio-economic characteristics and pregnancy planning and acceptance was evaluated by comparing accepting non...

  8. Acceptability of locally produced ready-to-use therapeutic foods in Ethiopia, Ghana, Pakistan and India.

    Science.gov (United States)

    Weber, Jacklyn M; Ryan, Kelsey N; Tandon, Rajiv; Mathur, Meeta; Girma, Tsinuel; Steiner-Asiedu, Matilda; Saalia, Firibu; Zaidi, Shujaat; Soofi, Sajid; Okos, Martin; Vosti, Stephen A; Manary, Mark J

    2017-04-01

    Successful treatment of severe acute malnutrition has been achieved with ready-to-use therapeutic food (RUTF), but only 15% of children with severe acute malnutrition receive RUTF. The objective of this study was to determine whether new formulations of RUTF produced using locally available ingredients were acceptable to young children in Ethiopia, Ghana, Pakistan and India. The local RUTFs were formulated using a linear programming tool that allows for inclusion of only local ingredients and minimizes cost. The study consisted of 4 two-arm, crossover, site-randomized food acceptability trials to test the acceptability of an alternative RUTF formula compared with the standard peanut-based RUTF containing powdered milk. Fifty children with moderate wasting in each country were enrolled in the 2-week study. Acceptability was measured by overall consumption, likeability and adverse effects reported by caregivers. Two of the four RUTFs did not include peanut, and all four used alternative dairy proteins rather than milk. The ingredient cost of all of the RUTFs was about 60% of standard RUTF. In Ethiopia, Ghana and India, the local RUTF was tolerated well without increased reports of rash, diarrhoea or vomiting. Children consumed similar amounts of local RUTF and standard RUTF and preferred them similarly as well. In Pakistan, local RUTF was consumed in similar quantities, but mothers perceived that children did not enjoy it as much as standard RUTF. Our results support the further investigation of these local RUTFs in Ethiopia, Ghana and India in equivalency trials and suggest that local RUTFs may be of lower cost. © 2016 John Wiley & Sons Ltd.

  9. Self-acceptance of stuttering: A preliminary study.

    Science.gov (United States)

    De Nardo, Thales; Gabel, Rodney M; Tetnowski, John A; Swartz, Eric R

    2016-01-01

    This study explored the relationship between self-acceptance of stuttering and (1) psychosocial factors (self-esteem, hostility towards others, emotional support, and perceived discrimination); (2) treatment history (support group participation, therapy duration, and perceived therapy success); and (3) previously reported variables in self-acceptance of stuttering, which include age and stuttering severity. Participants were 80 adults who stutter who were recruited with assistance from the National Stuttering Association and Board Certified Specialists in Fluency Disorders. Participants completed an electronic survey composed of an acceptance of stuttering scale, psychosocial scales, and a participant information questionnaire. Statistical analysis identified significant correlations between participants' reports of self-acceptance of stuttering and self-esteem, perceived discrimination, hostility towards others, and perceived therapy outcome. Self-esteem was positively correlated with self-acceptance, while hostility towards others and perceived discrimination was negatively correlated with self-acceptance. Participants who perceived their therapy outcome to be successful were significantly more likely to report higher levels of self-acceptance. No significant relationships were found between self-acceptance of stuttering and support group participation, emotional support, stuttering severity, and participant age. This exploratory investigation has provided a foundation for future studies on the self-acceptance of stuttering. The findings indicate common psychosocial variables in self-acceptance of stuttering and of other disabilities. The significant relationships between self-acceptance of stuttering and psychosocial and therapeutic variables found need to be further explored to identify its causalities and clinical implications. The reader will be able to (1) discuss the importance of assessing self-acceptance of stuttering, (2) summarize the literature on self-acceptance

  10. A trial of a brief group-based form of acceptance and commitment therapy (ACT) for chronic pain in general practice: pilot outcome and process results.

    Science.gov (United States)

    McCracken, Lance M; Sato, Ayana; Taylor, Gordon J

    2013-11-01

    Acceptance and commitment therapy (ACT) is a developing approach for chronic pain. The current study was designed to pilot test a brief, widely inclusive, local access format of ACT in a UK primary care setting. Seventy-three participants (68.5% women) were randomized to either ACT or treatment as usual (TAU). Many of the participants were aged 65 years or older (27.6%), were diagnosed with fibromyalgia (30.2%) and depression (40.3%), and had longstanding pain (median = 10 years). Standard clinical outcome measures included disability, depression, physical functioning, emotional functioning, and rated improvement. Process measures included pain-related and general psychological acceptance. The recruitment target was met within 6 months, and 72.9% of those allocated to ACT completed treatment. Immediately post treatment, relative to TAU, participants in ACT demonstrated lower depression and higher ratings of overall improvement. At a 3-month follow-up, again relative to TAU, those in ACT demonstrated lower disability, less depression, and significantly higher pain acceptance; d = .58, .59, and .64, respectively. Analyses based on intention-to-treat and on treatment "completers," perhaps predictably, revealed more sobering and more encouraging results, respectively. A larger trial of ACT delivered in primary care, in the format employed here, appears feasible with some recommended adjustments in the methods used here (Trial registration: ISRCTN49827391). This article presents a pilot randomized controlled trial of ACT for chronic pain in a primary care setting in the United Kingdom. Both positive clinical outcomes and ways to improve future trials are reported. Copyright © 2013 American Pain Society. All rights reserved.

  11. Construct and Predictive Validity of Social Acceptability: Scores From High School Teacher Ratings on the School Intervention Rating Form

    Science.gov (United States)

    Harrison, Judith R.; State, Talida M.; Evans, Steven W.; Schamberg, Terah

    2016-01-01

    The purpose of this study was to evaluate the construct and predictive validity of scores on a measure of social acceptability of class-wide and individual student intervention, the School Intervention Rating Form (SIRF), with high school teachers. Utilizing scores from 158 teachers, exploratory factor analysis revealed a three-factor (i.e.,…

  12. Being Mindful about the Assessment of Culture: A Cultural Analysis of Culturally Adapted Acceptance-Based Behavior Therapy Approaches

    Science.gov (United States)

    La Roche, Martin; Lustig, Kara

    2013-01-01

    In this article we review a wide range of cultural adaptations of acceptance-based behavior therapies (ABBT) from a cultural perspective. Consistent with the cultural match model, we argue that psychotherapeutic cultural adaptations are more effective as the cultural characteristics of patients are matched to the cultural characteristics of the…

  13. Adolescent Suicide Prevention: Gender Differences in Students' Perceptions of the Acceptability and Intrusiveness of School-Based Screening Programs

    Science.gov (United States)

    Eckert, Tanya L.; Miller, David N.; Riley-Tillman, T. Christopher; DuPaul, George J.

    2006-01-01

    Suicidal behavior is a significant problem among adolescents in the United States. Three types of school-based suicide prevention programs have been proposed to address this problem including curriculum programs, staff in-service training, and school-wide screening. The relative acceptability of these three programs among older adolescents was…

  14. Innovation and reliability of atomic standards for PTTI applications

    Science.gov (United States)

    Kern, R.

    1981-01-01

    Innovation and reliability in hyperfine frequency standards and clock systems are discussed. Hyperfine standards are defined as those precision frequency sources and clocks which use a hyperfine atomic transition for frequency control and which have realized significant commercial production and acceptance (cesium, hydrogen, and rubidium atoms). References to other systems such as thallium and ammonia are excluded since these atomic standards have not been commercially exploited in this country.

  15. Electromagnetic field standards and exposure systems

    CERN Document Server

    Grudzinski, Eugeniusz

    2013-01-01

    When measuring electromagnetic fields (EMF), there are multiple factors that affect accuracy. Everything from proper instrument calibration, to external environmental factors, and even the competence and training of the instrument operator can bring precision into question. This book discusses factors that limit accuracy of electromagnetic field standards. These standards are one of the least accurate among the standards of physical magnitudes. They limit the accuracy of the EMF measurements, as well as the accuracy of the standards' use as exposure systems in a wide range of experiments in el

  16. Accepting, understanding, teaching, and learning (human) evolution: Obstacles and opportunities.

    Science.gov (United States)

    Pobiner, Briana

    2016-01-01

    Questions about our origin as a species are universal and compelling. Evolution-and in particular human evolution-is a subject that generates intense interest across the world, evidenced by the fact that fossil and DNA discoveries grace the covers of major science journals and magazines as well as other popular print and online media. However, virtually all national polls indicate that the majority of Americans strongly reject biological evolution as a fact-based, well-tested, and robust understanding of the history of life. In the popular mind, no topic in all of science is more contentious or polarizing than evolution and media sources often only serve to magnify this polarization by covering challenges to the teaching of evolution. In the realm of teaching, debates about evolution have shaped textbooks, curricula, standards, and policy. Challenges to accepting and understanding evolution include mistrust and denial of science, cognitive obstacles and misconceptions, language and terminology, and a religious worldview, among others. Teachers, who are on the front lines of these challenges, must be armed with the tools and techniques to teach evolution in formal education settings across grades K-16 in a straightforward, thorough, and sensitive way. Despite the potentially controversial topic of human evolution, growing research is demonstrating that a pedagogical focus on human examples is an effective and engaging way to teach core concepts of evolutionary biology. © 2016 Wiley Periodicals, Inc.

  17. Tim Berners-Lee, World Wide Web inventor

    CERN Document Server

    1994-01-01

    Former physicist, Tim Berners-Lee invented the World Wide Web as an essential tool for high energy physics at CERN from 1989 to 1994. Together with a small team he conceived HTML, http, URLs, and put up the first server and the first 'what you see is what you get' browser and html editor. Tim is now Director of the Web Consortium W3C, the International Web standards body based at INRIA, MIT and Keio University.

  18. DCC Case Study: Wide Field Astronomy Unit (WFAU)

    OpenAIRE

    Donnelly, Martin

    2005-01-01

    Case study on the Wide Field Astronomy Unit (WFAU), Edinburgh. Outlines data curation issues with which WFAU is involved, with an emphasis on interoperability. Particular regard is given to the transfer and reuse of data collected from disparate sources. The case study also covers other factors influencing data curation, including methodological development, standards and legal issues, evaluation, and human factors. A technical appendix outlines the technologies used i...

  19. STANDARDIZATION AS A DILEMNATIC POLICY

    Directory of Open Access Journals (Sweden)

    Suatmo Pantja Putra

    2017-03-01

    Full Text Available Standard language is generally regarded as language well establishe by usage in the speech and writing of educated people. As a product of schooling, this learnt language has, in may societies, come to assume a special place and is looked upon as an authoritative model of correctness and quality and, at its best, perfection. In language conscious speech communities, standard language also serves as a reliable measure of language profeciency which is made use of by people in administrative or educational authority. Language planners and prcatitioners in particular are charged with the responsibility of upholding this language in its purest forms. Meanwhile, the learning and teaching of standard language have become accepted as an integral part of every national or state-level educational system�s long-term obligations. This paper presents the discussion on the innappropriateness of the use of them �standard� instead of �standardized� language. It also suggests that planning for language policy within a particular situation inevitably demands taking into account not only multiple social factors and goverment goals, but also the ways in which these conditions affect language and literary acquisition across segments of the population, otherwise it can be a dilemnatic and problematic policy.

  20. Ionizing radiation--understanding and acceptance.

    Science.gov (United States)

    Mihai, Laurentiu Teodor; Milu, Constantin; Voicu, Bogdan; Enachescu, Dan

    2005-10-01

    A written survey about perceived radiation risks was conducted among three groups of a total of 400 individuals. Seventy-seven (26%) of the respondents were radiation workers, 35 (12%) were medical doctors without professional exposure, and 177 (68%) belonged to the general population. Even if the sample is not representative of the Romanian population as a whole, some interesting conclusions can be made. The level of anxiety toward radiation, expressed as a hazard perception index, is significantly lower in radiation workers when compared to medical doctors and the general population (0.81 +/- 0.94, 1.42 +/- 1.21, and 1.72 +/- 1.34, respectively, p < 0.001). Hazard perception index values also varied with the education status, with lowest values among medical university graduates and highest among public school graduates (p < 0.001). Both university-graduated groups significantly differ from the non-university groups (p < 0.05). Knowledge about radiation and emergency plans for nuclear accidents/incidents was also correlated with hazard perception, with the results confirming the hypothesis that better knowledge is associated with lower radiation hazard perception. The extent to which people accept civilian nuclear power is also related to hazard perception and knowledge. The way people perceive the radiation risk differed among the three groups. Different levels of risk perception were associated with radiation from nuclear energy and diagnostic x rays. It is important that radiological protection authorities develop new plans and materials for communicating with the general public in order to improve knowledge of ionizing radiation, radiation risks, and the safety of civilian nuclear energy employment.

  1. Constructing a semantic predication gold standard from the biomedical literature

    Directory of Open Access Journals (Sweden)

    Kilicoglu Halil

    2011-12-01

    Full Text Available Abstract Background Semantic relations increasingly underpin biomedical text mining and knowledge discovery applications. The success of such practical applications crucially depends on the quality of extracted relations, which can be assessed against a gold standard reference. Most such references in biomedical text mining focus on narrow subdomains and adopt different semantic representations, rendering them difficult to use for benchmarking independently developed relation extraction systems. In this article, we present a multi-phase gold standard annotation study, in which we annotated 500 sentences randomly selected from MEDLINE abstracts on a wide range of biomedical topics with 1371 semantic predications. The UMLS Metathesaurus served as the main source for conceptual information and the UMLS Semantic Network for relational information. We measured interannotator agreement and analyzed the annotations closely to identify some of the challenges in annotating biomedical text with relations based on an ontology or a terminology. Results We obtain fair to moderate interannotator agreement in the practice phase (0.378-0.475. With improved guidelines and additional semantic equivalence criteria, the agreement increases by 12% (0.415 to 0.536 in the main annotation phase. In addition, we find that agreement increases to 0.688 when the agreement calculation is limited to those predications that are based only on the explicitly provided UMLS concepts and relations. Conclusions While interannotator agreement in the practice phase confirms that conceptual annotation is a challenging task, the increasing agreement in the main annotation phase points out that an acceptable level of agreement can be achieved in multiple iterations, by setting stricter guidelines and establishing semantic equivalence criteria. Mapping text to ontological concepts emerges as the main challenge in conceptual annotation. Annotating predications involving biomolecular

  2. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  3. Social Robots, Brain Machine Interfaces and Neuro/Cognitive Enhancers: Three Emerging Science and Technology Products through the Lens of Technology Acceptance Theories, Models and Frameworks

    Directory of Open Access Journals (Sweden)

    Gregor Wolbring

    2013-06-01

    Full Text Available Social robotics, brain machine interfaces and neuro and cognitive enhancement products are three emerging science and technology products with wide-reaching impact for disabled and non-disabled people. Acceptance of ideas and products depend on multiple parameters and many models have been developed to predict product acceptance. We investigated which frequently employed technology acceptance models (consumer theory, innovation diffusion model, theory of reasoned action, theory of planned behaviour, social cognitive theory, self-determination theory, technology of acceptance model, Unified Theory of Acceptance and Use of Technology UTAUT and UTAUT2 are employed in the social robotics, brain machine interfaces and neuro and cognitive enhancement product literature and which of the core measures used in the technology acceptance models are implicit or explicit engaged with in the literature.

  4. ENHANCING STAKEHOLDER ACCEPTANCE OF BIOREMEDIATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Focht, Will; Albright, Matt; Anex, Robert P., Jr., ed.

    2009-04-21

    This project inquired into the judgments and beliefs of people living near DOE reservations and facilities at Oak Ridge, Tennessee; Hanford, Washington; and Los Alamos, Tennessee about bioremediation of subsurface contamination. The purpose of the investigation was to identify strategies based on these judgments and beliefs for enhancing public support of bioremediation. Several methods were used to collect and analyze data including content analysis of transcripts of face-to-face personal interviews, factor analysis of subjective perspectives using Q methodology, and statistical analysis of results from a large-sample randomized telephone survey. Content analysis of interview transcripts identified themes about public perceptions and constructions of contamination risk, risk management, and risk managers. This analysis revealed that those who have no employment relationship at the sites and are not engaged in technical professions are most concerned about contamination risks. We also found that most interviewees are unfamiliar with subsurface contamination risks and how they can be reduced, believe they have little control over exposure, are frustrated with the lack of progress in remediation, are concerned about a lack of commitment of DOE to full remediation, and distrust site managers to act in the public interest. Concern is also expressed over frequent site management turnover, excessive secrecy, ineffective and biased communication, perceived attempts to talk the public into accepting risk, and apparent lack of concern about community welfare. In the telephone survey, we asked respondents who were aware of site contamination about their perceptions of risk from exposure to subsurface contamination. Response analysis revealed that most people believe that they are at significant risk from subsurface contamination but they acknowledge that more education is needed to calibrate risk perceptions against scientific risk assessments. Most rate their personal

  5. BioHealth--the need for security and identity management standards in eHealth.

    Science.gov (United States)

    Hildebrand, Claudia; Pharow, Peter; Engelbrecht, Rolf; Blobel, Bernd; Savastano, Mario; Hovsto, Asbjorn

    2006-01-01

    The experience gained in these last years and the several lesson learned have clearly shown that eHealth is more than just a simple change from paper records to electronic records. It necessitates a change of paradigms, on the one hand and the use of new technologies and introduction of new procedures on the other. Interoperability becomes a crucial issue. Security and confidentiality are vital for the acceptance of the new approaches and for the support of eHealth. Shared care and across-border interactions require a reliable and stable normative framework based on the application of standardized solutions, which are often not yet sufficiently known, diffused and implemented. Feeling this gap, a group of international experts in the medical area proposed to the EC the BioHealth project whose main aim is to create awareness about standardization in eHealth and to facilitate its practical implementation. The project will address all the stakeholders concerning their respective domain. It will evaluate the socio-economic and cultural aspects concerning eHealth with particular reference to the growing introduction of emerging technologies such as health cards, biometrics, RFID (radio-frequency identification) and NFC (Near field communication) tags. By providing information and expert advice on standardization and best practices it will raise the acceptance on standardization. Furthermore, the project will deeply approach the ethical and accessibility issues connected to identity management in eHealth, which -together with privacy- represent probably the most significant obstacles for the wide diffusion of eHealth procedures.

  6. Standards for quality assurance of pre-employment medical examinations of seafarers: the IMHA Quality experience.

    Science.gov (United States)

    Carter, Tim; Bell, Sally; Horneland, Alf Magne; Idnani, Suresh

    2017-01-01

    Standards to assess the quality of doctors and clinics performing pre-employment medical examinations (PEMEs) were developed for International Maritime Health Association (IMHA) Quality, a not for profit organisation, created to provide an ethically sound and professional accepted accreditation system that would benefit seafarers having PEMEs and employers, insurers and national maritime authorities seeking valid assessments of seafarers' fitness for duty. These standards followed a format widely used in other healthcare settings, where assessment of clinical performance is desirable. Uptake of these standards by doctors and clinics was not as expected, as they did not see sufficient business benefits coming from accreditation to justify the costs. This was, at least in part, because there was some antagonism to a professionally based accreditation system from commercial interest groups such as insurers, while national maritime authorities did not come forward to use the system as a recommendation or requirement for approval of doctors. The IMHA Quality accreditation system has now been closed and for this reason we are making the standards publicly available. Those who helped to develop them hope that doctors and clinics will now use them as a means of improving the quality of their practice when performing PEME.

  7. Acceptance of dying: a discourse analysis of palliative care literature.

    Science.gov (United States)

    Zimmermann, Camilla

    2012-07-01

    The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. Systemization of the Establishment of Standards and Future Prospects: Toward the Establishment of Standards in Nonstationary States.

    Science.gov (United States)

    Murakami, Michio

    2017-01-01

    Although public interest on safety standards is increasing, the evidence and protocols associated with the standards are not known well to the public and even experts. Discussing the evidence of standards is essential for risk communication, and interdisciplinary and systematical understanding on how to establish standards are also beneficial for considering the set-up of new standards. In this article, on the basis of examples in environmental science, industrial health and safety, and radiological protection, I overview and systemize the establishment of the standards from the perspectives of three principles of risk management: 1) "zero-risk-like" standards, 2) "acceptable-risk-based" standards, and 3) "cost-balanced" standards. In this view, I point out the differences in uncertainty factors or acceptable-risk levels among individual standards and demonstrate the role of the "as low as reasonably achievable (ALARA)" concept. Then, on the basis of the problem on lack of environmental standards in nonstationary states such as disasters, I summarize elements necessary for establishing the standards. As perspectives for further study, I suggest the needs for risk assessment of chemicals having a threshold, full considerations of risk trade-offs and ethical aspects, and applications of processes to the establishment of standards through stakeholder consensus.

  9. ORACLE Stroke Study: Opinion Regarding Acceptable Outcome Following Decompressive Hemicraniectomy for Ischemic Stroke.

    Science.gov (United States)

    Honeybul, Stephen; Ho, Kwok M; Blacker, David W

    2016-08-01

    There continues to be considerable interest in the use of decompressive hemicraniectomy in the management of malignant cerebral artery infarction; however, concerns remain about long-term outcome. To assess opinion on consent and acceptable outcome among a wide range of healthcare workers. Seven hundred seventy-three healthcare workers at the 2 major public neurosurgical centers in Western Australia participated. Participants were asked to record their opinion on consent and acceptable outcome based on the modified Rankin Score (mRS). The evidence for clinical efficacy of the procedure was presented, and participants were then asked to reconsider their initial responses. Of the 773 participants included in the study, 407 (52.7%) initially felt that they would provide consent for a decompressive craniectomy as a lifesaving procedure, but only a minority of them considered an mRS score of 4 or 5 an acceptable outcome (for mRS score ≤4, n = 67, 8.7%; for mRS score = 4, n = 57, 7.4%). After the introduction of the concept of the disability paradox and the evidence for the clinical efficacy of decompressive craniectomy, more participants were unwilling to accept decompressive craniectomy (18.1% vs 37.8%), but at the same time, more were willing to accept an mRS score ≤4 as an acceptable outcome (for mRS score ≤4, n = 92, 11.9%; for mRS score = 4, n = 79, 10.2%). Most participants felt survival with dependency to be unacceptable. However, many would be willing to provide consent for surgery in the hopes that they may survive with some degree of independence. DESTINY, Decompressive Surgery for the Treatment of Malignant Infarction of the Middle Cerebral ArterymRS, modified Rankin Scale.

  10. Ultra-wide-field imaging in diabetic retinopathy.

    Science.gov (United States)

    Ghasemi Falavarjani, Khalil; Tsui, Irena; Sadda, Srinivas R

    2017-10-01

    Since 1991, 7-field images captured with 30-50 degree cameras in the Early Treatment Diabetic Retinopathy Study were the gold standard for fundus imaging to study diabetic retinopathy. Ultra-wide-field images cover significantly more area (up to 82%) of the fundus and with ocular steering can in many cases image 100% of the fundus ("panretinal"). Recent advances in image analysis of ultra-wide-field imaging allow for precise measurements of the peripheral retinal lesions. There is a growing consensus in the literature that ultra-wide-field imaging improves detection of peripheral lesions in diabetic retinopathy and leads to more accurate classification of the disease. There is discordance among studies, however, on the correlation between peripheral diabetic lesions and diabetic macular edema and optimal management strategies to treat diabetic retinopathy. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Reactor Section standard analytical methods. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Sowden, D.

    1954-07-01

    the Standard Analytical Methods manual was prepared for the purpose of consolidating and standardizing all current analytical methods and procedures used in the Reactor Section for routine chemical analyses. All procedures are established in accordance with accepted practice and the general analytical methods specified by the Engineering Department. These procedures are specifically adapted to the requirements of the water treatment process and related operations. The methods included in this manual are organized alphabetically within the following five sections which correspond to the various phases of the analytical control program in which these analyses are to be used: water analyses, essential material analyses, cotton plug analyses boiler water analyses, and miscellaneous control analyses.

  12. Developing social standards for wilderness encounters in Mount Rainier National Park: Manager-defined versus visitor-defined standards

    Science.gov (United States)

    Kristopher J. Lah

    2000-01-01

    This research compared the differences found between manager-defined and visitor-defined social standards for wilderness encounters in Mount Rainier National Park. Social standards in recreation areas of public land are defined by what is acceptable to the public, in addition to the area’s management. Social standards for the encounter indicator in Mount Rainier’s...

  13. International Standardization of Bed Rest Standard Measures

    Science.gov (United States)

    Cromwell, Ronita L.

    2010-01-01

    This slide presentation gives an overview of the standardization of bed rest measures. The International Countermeasures Working Group attempted to define and agree internationally on standard measurements for spaceflight based bed rest studies. The group identified the experts amongst several stakeholder agencys. It included information on exercise, muscle, neurological, psychological, bone and cardiovascular measures.

  14. Radiative detached divertor with acceptable separatrix Zeff

    Science.gov (United States)

    Pigarov, A. Yu.

    2017-10-01

    The feasibility study is performed for the radiative detached divertor (RDD) concept, which characterizes a variety of detached plasmas with impurity amounts providing the highest levels of divertor radiation without X-point MARFE (XPM), based on a set of restrictive criteria for the leading plasma parameters (LPPs) including, e.g., tolerable peak power loads below 1 MW/m2, low separatrix densities, allowable impurity concentrations, and acceptable Zeff values for a DIII-D like tokamak. For this, extensive simulations with the 2-D edge plasma transport code were done scanning the deuterium and impurity inventories practically for all impurity elements from beryllium to neon and the analysis of LPP variations in these scans is presented. It is shown that, for a given D inventory, the total radiation fraction with an increase in the impurity inventory reaches a flat top level, frad = 0.85 ± 0.01, whereas the higher frad corresponds to XPM. This critical fraction is the same for all elements and values of the D inventory. Successful RDD solutions with a flat top radiation meeting all ad hoc LPP criteria are found for some elements. Boron and nitrogen are shown to be the most promising elements for seeding, since they are capable of providing alone the successful RDD at the lowest concentrations. Several important effects on impurity radiation are considered including: cross-field impurity transport in regions with strong temperature gradients, multi-species thermal force, charge-exchange of impurity ions with D atoms originating from recombination, impurity entrainment by parallel flows, flows caused by inner/outer divertor asymmetries, and Mach ˜ 1 flows reached inside radiation-ionization fronts. The impurity radiation profiles of various elements are analyzed suggesting three patterns differing in the radiation front position with respect to the D ionization source. The modeled relocation of D from the pedestal into divertor regions; an enhanced pedestal

  15. Calibrated permeation standards

    Energy Technology Data Exchange (ETDEWEB)

    Dameron, Arrelaine A.; Reese, Matthew O.; Kempe, Michael D.

    2017-11-21

    A permeation standard is provided. The permeation standard may include a substrate that is impermeable to an analyte, an orifice disposed in the substrate, and a permeable material filling the orifice. The orifice and the permeable material are configured to provide a predetermined transmission rate of the analyte through the permeation standard. Also provided herein are methods for forming the permeation standard.

  16. Creating standards: Creating illusions?

    DEFF Research Database (Denmark)

    Linneberg, Mai Skjøtt

    written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...

  17. Nevada Test Site Waste Acceptance Criteria, December 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    This document establishes the US Department of Energy, Nevada Operations Office waste acceptance criteria. The waste acceptance criteria provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive waste and mixed waste for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Sites for storage or disposal.

  18. Lesbian, Gay, Bisexual, and Transgender Youth and Family Acceptance.

    Science.gov (United States)

    Katz-Wise, Sabra L; Rosario, Margaret; Tsappis, Michael

    2016-12-01

    In this article, we address theories of attachment and parental acceptance and rejection, and their implications for lesbian, gay, bisexual, and transgender (LGBT) youths' identity and health. We also provide 2 clinical cases to illustrate the process of family acceptance of a transgender youth and a gender nonconforming youth who was neither a sexual minority nor transgender. Clinical implications of family acceptance and rejection of LGBT youth are discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. The Sexual Acceptability of Contraception: Reviewing the Literature and Building a New Concept.

    Science.gov (United States)

    Higgins, Jenny A; Smith, Nicole K

    2016-01-01

    How contraceptives affect women's sexual well-being is critically understudied. Fortunately, a growing literature focuses on sexual aspects of contraception, especially hormonal contraception's associations with libido. However, a more holistic approach to contraceptive sexual acceptability is needed to capture the full range of women's sexual experiences. We conducted a narrative literature review of this topic, working with an original sample of 3,001 citations published from 2005 to 2015. In Part 1, we draw from a subset of this literature (264 citations) to build a new conceptual model of sexual acceptability. Aspects include macro factors (gender, social inequality, culture, and structure), relationship factors (dyadic influences and partner preferences), and individual factors (sexual functioning, sexual preferences, such as dis/inhibition, spontaneity, pleasure, the sexual aspects of side effects, such as bleeding, mood changes, sexual identity and sexual minority status, and pregnancy intentions). In Part 2, we review the empirical literature on the sexual acceptability of individual methods (103 citations), applying the model as much as possible. Results suggest contraceptives can affect women's sexuality in a wide variety of positive and negative ways that extend beyond sexual functioning alone. More attention to sexual acceptability could promote both women's sexual well-being and more widespread, user-friendly contraceptive practices.

  20. Retaliatory mafia behavior by a parasitic cowbird favors host acceptance of parasitic eggs.

    Science.gov (United States)

    Hoover, Jeffrey P; Robinson, Scott K

    2007-03-13

    Why do many hosts accept costly avian brood parasitism even when parasitic eggs and nestlings differ dramatically in appearance from their own? Scientists argue that evolutionary lag or equilibrium can explain this evolutionary enigma. Few, however, consider the potential of parasitic birds to enforce acceptance by destroying eggs or nestlings of hosts that eject parasitic eggs and thereby reject parasitism. This retaliatory "mafia" behavior has been reported in one species of parasitic cuckoo but never in parasitic cowbirds. Here we present experimental evidence of mafia behavior in the brown-headed cowbird (Molothrus ater), a widely distributed North American brood parasite. We manipulated ejection of cowbird eggs and cowbird access to predator-proof nests in a common host to test experimentally for mafia behavior. When cowbird access was allowed, 56% of "ejector" nests were depredated compared with only 6% of "accepter" nests. No nests were destroyed when cowbird access was always denied or when access was denied after we removed cowbird eggs, indicating that cowbirds were responsible. Nonparasitized nests were depredated at an intermediate rate (20%) when cowbirds were allowed access, suggesting that cowbirds may occasionally "farm" hosts to create additional opportunities for parasitism. Cowbirds parasitized most (85%) renests of the hosts whose nests were depredated. Ejector nests produced 60% fewer host offspring than accepter nests because of the predatory behavior attributed to cowbirds. Widespread predatory behaviors in cowbirds could slow the evolution of rejection behaviors and further threaten populations of some of the >100 species of regular cowbird hosts.