Gender Equity in Advertising on the World-Wide Web: Can it be Found?

Science.gov (United States)

Kramer, Kevin M.; Knupfer, Nancy Nelson

Recent attention to gender equity in computer environments, as well as in print-based and televised advertising for technological products, suggests that gender bias in the computer environment continues. This study examined gender messages within World Wide Web advertisements, specifically the type and number of visual images used in Web banner…

Lithuanian on-line periodicals on the World Wide Web

Directory of Open Access Journals (Sweden)

Lina Sarlauskiene

2001-01-01

Full Text Available Deals with Lithuanian full-text electronic periodicals distributed through the World Wide Web. An electronic periodical is usually defined as a regular publication on some particular topic distributed in digital form, chiefly through the Web, but also by electronic mail or digital disk. The author has surveyed 106 publications. Thirty-four are distributed only on the Web, and 72 have printed versions. The number of analysed publications is not very big, but four years of electronic publishing and the variety of periodicals enables us to establish the causes of this phenomenon, the main features of development, and some perspectives. Electronic periodicals were analysed according to their type, purpose, contents, publisher, regularity, language, starting date and place of publication, and other features.

Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system.

Science.gov (United States)

Chang, Jaehyuk; Lee, Sunggun; Lee, Ki Beom; Lee, Seungjun; Cho, Young Tae; Seo, Jungwoo; Lee, Sukwon; Jo, Gugrae; Lee, Ki-yong; Kong, Hyang-Shik; Kwon, Sin

2015-05-01

For high-quality flexible devices from printing processes based on Roll-to-Roll (R2R) systems, overlay alignment during the patterning of each functional layer poses a major challenge. The reason is because flexible substrates have a relatively low stiffness compared with rigid substrates, and they are easily deformed during web handling in the R2R system. To achieve a high overlay accuracy for a flexible substrate, it is important not only to develop web handling modules (such as web guiding, tension control, winding, and unwinding) and a precise printing tool but also to control the synchronization of each unit in the total system. A R2R web handling system and reverse offset printing process were developed in this work, and an overlay between the 1st and 2nd layers of ±5μm on a 500 mm-wide film was achieved at a σ level of 2.4 and 2.8 (x and y directions, respectively) in a continuous R2R printing process. This paper presents the components and mechanisms used in reverse offset printing based on a R2R system and the printing results including positioning accuracy and overlay alignment accuracy.

The use of the World Wide Web by medical journals in 2003 and 2005: an observational study.

Science.gov (United States)

Schriger, David L; Ouk, Sripha; Altman, Douglas G

2007-01-01

The 2- to 6-page print journal article has been the standard for 200 years, yet this format severely limits the amount of detailed information that can be conveyed. The World Wide Web provides a low-cost option for posting extended text and supplementary information. It also can enhance the experience of journal editors, reviewers, readers, and authors through added functionality (eg, online submission and peer review, postpublication critique, and e-mail notification of table of contents.) Our aim was to characterize ways that journals were using the World Wide Web in 2005 and note changes since 2003. We analyzed the Web sites of 138 high-impact print journals in 3 ways. First, we compared the print and Web versions of March 2003 and 2005 issues of 28 journals (20 of which were randomly selected from the 138) to determine how often articles were published Web only and how often print articles were augmented by Web-only supplements. Second, we examined what functions were offered by each journal Web site. Third, for journals that offered Web pages for reader commentary about each article, we analyzed the number of comments and characterized these comments. Fifty-six articles (7%) in 5 journals were Web only. Thirteen of the 28 journals had no supplementary online content. By 2005, several journals were including Web-only supplements in >20% of their papers. Supplementary methods, tables, and figures predominated. The use of supplementary material increased by 5% from 2% to 7% in the 20-journal random sample from 2003 to 2005. Web sites had similar functionality with an emphasis on linking each article to related material and e-mailing readers about activity related to each article. There was little evidence of journals using the Web to provide readers an interactive experience with the data or with each other. Seventeen of the 138 journals offered rapid-response pages. Only 18% of eligible articles had any comments after 5 months. Journal Web sites offer similar

DICOM to print, 35-mm slides, web, and video projector: tutorial using Adobe Photoshop.

Science.gov (United States)

Gurney, Jud W

2002-10-01

Preparing images for publication has dealt with film and the photographic process. With picture archiving and communications systems, many departments will no longer produce film. This will change how images are produced for publication. DICOM, the file format for radiographic images, has to be converted and then prepared for traditional publication, 35-mm slides, the newest techniques of video projection, and the World Wide Web. Tagged image file format is the common format for traditional print publication, whereas joint photographic expert group is the current file format for the World Wide Web. Each medium has specific requirements that can be met with a common image-editing program such as Adobe Photoshop (Adobe Systems, San Jose, CA). High-resolution images are required for print, a process that requires interpolation. However, the Internet requires images with a small file size for rapid transmission. The resolution of each output differs and the image resolution must be optimized to match the output of the publishing medium.

Ultrafiltrative deinking of flexographic ONP : the role of surfactants

Science.gov (United States)

Bradley H. Upton; Gopal A. Krishnagopalan; Said Abubakr

1999-01-01

Ultrafiltration is a potentially viable method of removing finely dispersed flexographic pigments from the deinking water loop. This work examines the effects of surface-active materials on ultrafiltration efficiency. A logarithmic relationship between permeate flax and pigment concentration was demonstrated at ink concentrations above 0.4%, permeation rates becoming...

Coagulation and Adsorption Treatment of Printing Ink Wastewater

OpenAIRE

Klančnik, Maja

2014-01-01

The intention of the study was to improve the efficiency of total organic carbon (TOC) and colour removal from the wastewater samples polluted with flexographic printing ink following coagulation treatments with further adsorption onto activated carbons and ground orange peel. The treatment efficiencies were compared to those of further flocculation treatments and of coagulation and adsorption processes individually. Coagulation was a relatively effective single-treatment method, removing 99...

Recent trends in print portals and Web2Print applications

Science.gov (United States)

Tuijn, Chris

2009-01-01

case, the ordering process is, of course, not fully automated. Standardized products, on the other hand, are easily identified and the cost charged to the print buyer can be retrieved from predefined price lists. Typically, higher volumes will result in more attractive prices. An additional advantage of this type of products is that they are often defined such that they can be produced in bulk using conventional printing techniques. If one wants to automate the ganging, a connection must be established between the on-line ordering and the production planning system. (For digital printing, there typically is no need to gang products since they can be produced more effectively separately.) Many of the on-line print solutions support additional features also available in general purpose e-commerce sites. We here think of the availability of virtual shopping baskets, the connectivity with payment gateways and the support of special facilities for interfacing with courier services (bar codes, connectivity to courier web sites for tracking shipments etc.). Supporting these features also assumes an intimate link with the print production system. Another development that goes beyond the on-line ordering of printed material and the submission of full pages and/or documents, is the interactive, on-line definition of the content itself. Typical applications in this respect are, e.g., the creation of business cards, leaflets, letter heads etc. On a more professional level, we also see that more and more publishing organizations start using on-line publishing platforms to organize their work. These professional platforms can also be connected directly to printing portals and thus enable extra automation. In this paper, we will discuss for each of the different applications presented above (traditional Print Portals, Web2Print applications and professional, on-line publishing platforms) how they interact with prepress and print production systems and how they contribute to the

40 CFR 63.821 - Designation of affected sources.

Science.gov (United States)

2010-07-01

...) National Emission Standards for the Printing and Publishing Industry § 63.821 Designation of affected... flexographic printing affected source. (7) Other presses are part of the printing and publishing industry...-flexographic presses are part of the printing and publishing industry source category, but are not part of the...

Unit 148 - World Wide Web Basics

OpenAIRE

148, CC in GIScience; Yeung, Albert K.

2000-01-01

This unit explains the characteristics and the working principles of the World Wide Web as the most important protocol of the Internet. Topics covered in this unit include characteristics of the World Wide Web; using the World Wide Web for the dissemination of information on the Internet; and using the World Wide Web for the retrieval of information from the Internet.

Introduction to the world wide web.

Science.gov (United States)

Downes, P K

2007-05-12

The World Wide Web used to be nicknamed the 'World Wide Wait'. Now, thanks to high speed broadband connections, browsing the web has become a much more enjoyable and productive activity. Computers need to know where web pages are stored on the Internet, in just the same way as we need to know where someone lives in order to post them a letter. This section explains how the World Wide Web works and how web pages can be viewed using a web browser.

Consistency in the World Wide Web

DEFF Research Database (Denmark)

Thomsen, Jakob Grauenkjær

Tim Berners-Lee envisioned that computers will behave as agents of humans on the World Wide Web, where they will retrieve, extract, and interact with information from the World Wide Web. A step towards this vision is to make computers capable of extracting this information in a reliable...... and consistent way. In this dissertation we study steps towards this vision by showing techniques for the specication, the verication and the evaluation of the consistency of information in the World Wide Web. We show how to detect certain classes of errors in a specication of information, and we show how...... the World Wide Web, in order to help perform consistent evaluations of web extraction techniques. These contributions are steps towards having computers reliable and consistently extract information from the World Wide Web, which in turn are steps towards achieving Tim Berners-Lee's vision. ii...

World Wide Web voted most wonderful wonder by web-wide world

CERN Multimedia

2007-01-01

The results are in, and the winner is...the World Wide Web! An online survey conducted by the CNN news group ranks the World Wide Web-invented at CERN--as the most wonderful of the seven modern wonders of the world. (See Bulletin No. 49/2006.) There is currently no speculation about whether they would have had the same results had they distributed the survey by post. The World Wide Web won with a whopping 50 per cent of the votes (3,665 votes). The runner up was CERN again, with 16 per cent of voters (1130 votes) casting the ballot in favour of the CERN particle accelerator. Stepping into place behind CERN and CERN is 'None of the Above' with 8 per cent of the votes (611 votes), followed by the development of Dubai (7%), the bionic arm (7%), China's Three Gorges Damn (5%), The Channel Tunnel (4%), and France's Millau viaduct (3%). Thanks to everyone from CERN who voted. You can view the results on http://edition.cnn.com/SPECIALS/2006/modern.wonders/

A comparison of web-based versus print-based decision AIDS for prostate cancer screening: participants' evaluation and utilization.

Science.gov (United States)

Tomko, Catherine; Davis, Kimberly M; Luta, George; Krist, Alexander H; Woolf, Steven H; Taylor, Kathryn L

2015-01-01

Patient decision aids facilitate informed decision making for medical tests and procedures that have uncertain benefits. To describe participants' evaluation and utilization of print-based and web-based prostate cancer screening decision aids that were found to improve decisional outcomes in a prior randomized controlled trial. Men completed brief telephone interviews at baseline, one month, and 13 months post-randomization. Participants were primary care patients, 45-70 years old, who received the print-based (N = 628) or web-based decision aid (N = 625) and completed the follow-up assessments. We assessed men's baseline preference for web-based or print-based materials, time spent using the decision aids, comprehension of the overall message, and ratings of the content. Decision aid use was self-reported by 64.3 % (web) and 81.8 % (print) of participants. Significant predictors of decision aid use were race (white vs. non-white, OR = 2.43, 95 % CI: 1.77, 3.35), higher education (OR = 1.68, 95 % CI: 1.06, 2.70) and trial arm (print vs. web, OR = 2.78, 95 % CI: 2.03, 3.83). Multivariable analyses indicated that web-arm participants were more likely to use the website when they preferred web-based materials (OR: 1.91, CI: 1.17, 3.12), whereas use of the print materials was not significantly impacted by a preference for print-based materials (OR: 0.69, CI: 0.38, 1.25). Comprehension of the decision aid message (i.e., screening is an individual decision) did not significantly differ between arms in adjusted analyses (print: 61.9 % and web: 68.2 %, p = 0.42). Decision aid use was independently influenced by race, education, and the decision aid medium, findings consistent with the 'digital divide.' These results suggest that when it is not possible to provide this age cohort with their preferred decision aid medium, print materials will be more highly used than web-based materials. Although there are many advantages to web-based decision aids, providing an option for

Mechatronic design exploration for wide format printing systems

NARCIS (Netherlands)

Bruijnen, D.J.H.

2007-01-01

This work aims at increasing the performance of Wide Format Printing Systems (WFPS) via a mechatronic approach. With increasing performance is meant that one or more of the categories: productivity, print quality, reliability and/or cost of production, is improved without sacrificing one of the

Inkjet-Printed Ultra Wide Band Fractal Antennas

KAUST Repository

Maza, Armando Rodriguez

2012-05-01

In this work, Paper-based inkjet-printed Ultra-wide band (UWB) fractal antennas are presented. Three new designs, a combined UWB fractal monopole based on the fourth order Koch Snowflake fractal which utilizes a Sierpinski Gasket fractal for ink reduction, a Cantor-based fractal antenna which performs a larger bandwidth compared to previously published UWB Cantor fractal monopole antenna, and a 3D loop fractal antenna which attains miniaturization, impedance matching and multiband characteristics. It is shown that fractals prove to be a successful method of reducing fabrication cost in inkjet printed antennas while retaining or enhancing printed antenna performance.

An Evaluation of Web- and Print-Based Methods to Attract People to a Physical Activity Intervention

OpenAIRE

Alley, Stephanie; Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

2016-01-01

Background Cost-effective and efficient methods to attract people to Web-based health behavior interventions need to be identified. Traditional print methods including leaflets, posters, and newspaper advertisements remain popular despite the expanding range of Web-based advertising options that have the potential to reach larger numbers at lower cost. Objective This study evaluated the effectiveness of multiple Web-based and print-based methods to attract people to a Web-based physical activ...

Application of electron beam curing in web-offset printing

International Nuclear Information System (INIS)

Rodrigues, A.M.; Newcomb, W.T.

1984-01-01

Four years ago, the first commercial installation of an electron beam processor, coupled with a high speed web offset printing press was described. This line has been in operation since and its success demonstrates the advantages and feasibility of such an application. Just recently, another company has announced that it is using electron beam curing in its printing lines. Judging from the amount of inquiries and opportunities being actively pursued one can state that the use of electron beam systems in printing applications has come of age. This paper describes the advantages of this process, the characteristics of the equipment that are important for industrial use in a multishift environment, and addresses its economics through analysis of some major cost elements

An investigation of document aesthetics for web-to-print repurposing of small-medium business marketing collateral

Science.gov (United States)

Allebach, J. P.; Ortiz Segovia, Maria; Atkins, C. Brian; O'Brien-Strain, Eamonn; Damera-Venkata, Niranjan; Bhatti, Nina; Liu, Jerry; Lin, Qian

2010-02-01

Businesses have traditionally relied on different types of media to communicate with existing and potential customers. With the emergence of the Web, the relation between the use of print and electronic media has continually evolved. In this paper, we investigate one possible scenario that combines the use of the Web and print. Specifically, we consider the scenario where a small- or medium-sized business (SMB) has an existing web site from which they wish to pull content to create a print piece. Our assumption is that the web site was developed by a professional designer, working in conjunction with the business owner or marketing team, and that it contains a rich assembly of content that is presented in an aesthetically pleasing manner. Our goal is to understand the process that a designer would follow to create an effective and aesthetically pleasing print piece. We are particularly interested to understand the choices made by the designer with respect to placement and size of the text and graphic elements on the page. Toward this end, we conducted an experiment in which professional designers worked with SMBs to create print pieces from their respective web pages. In this paper, we report our findings from this experiment, and examine the underlying conclusions regarding the resulting document aesthetics in the context of the existing design, and engineering and computer science literatures that address this topic

Management van World-Wide Web Servers

NARCIS (Netherlands)

van Hengstum, F.P.H.; Pras, Aiko

1996-01-01

Het World Wide Web is een populaire Internet toepassing waarmee het mogelijk is documenten aan willekeurige Internet gebruikers aan te bieden. Omdat hiervoor nog geen voorzieningen zijn getroffen, was het tot voor kort niet goed mogelijk het World Wide Web op afstand te beheren. De Universiteit

Coagulation and Adsorption Treatment of Printing Ink Wastewater

Directory of Open Access Journals (Sweden)

Maja Klančnik

2015-03-01

Full Text Available The intention of the study was to improve the efficiency of total organic carbon (TOC and colour removal from the wastewater samples polluted with flexographic printing ink following coagulation treatments with further adsorption onto activated carbons and ground orange peel. The treatment efficiencies were compared to those of further flocculation treatments and of coagulation and adsorption processes individually. Coagulation was a relatively effective single-treatment method, removing 99.7% of the colour and 86.9% of the organic substances (TOC from the printing ink wastewater samples. Further flocculation did not further eliminate organic pollutants, whereas subsequent adsorption with 7 g/l of granular activated carbon further reduced organic substances by 35.1%, and adsorption with 7 g/l of powdered activated carbon further reduced organic substances by 59.3%. Orange peel was an inappropriate adsorbent for wastewater samples with low amounts of pollution, such as water that had been treated by coagulation. However, in highly polluted printing ink wastewater samples, the adsorption treatment with ground orange peel achieved efficiencies comparable to those of the granular activated carbon treatments.

Embedded Web Technology: Applying World Wide Web Standards to Embedded Systems

Science.gov (United States)

Ponyik, Joseph G.; York, David W.

2002-01-01

Embedded Systems have traditionally been developed in a highly customized manner. The user interface hardware and software along with the interface to the embedded system are typically unique to the system for which they are built, resulting in extra cost to the system in terms of development time and maintenance effort. World Wide Web standards have been developed in the passed ten years with the goal of allowing servers and clients to intemperate seamlessly. The client and server systems can consist of differing hardware and software platforms but the World Wide Web standards allow them to interface without knowing about the details of system at the other end of the interface. Embedded Web Technology is the merging of Embedded Systems with the World Wide Web. Embedded Web Technology decreases the cost of developing and maintaining the user interface by allowing the user to interface to the embedded system through a web browser running on a standard personal computer. Embedded Web Technology can also be used to simplify an Embedded System's internal network.

76 FR 46854 - Hewlett Packard Company, Imaging and Printing Group, World Wide Product Data Management...

Science.gov (United States)

2011-08-03

..., Imaging and Printing Group, World Wide Product Data Management Operations, Including On-Site Leased... Company, Imaging and Printing Group, World Wide Products Data Management Operations, Boise, Idaho and Fort... of Hewlett Packard Company, Imaging and Printing Group, World Wide Product Data Management Operations...

Voltage and Thermally Driven Roll-to-Roll Organic Printed Transistor Made in Ambient Air Conditions

DEFF Research Database (Denmark)

Pastorelli, Francesco

of the organic semiconductor poly3hexylthiophene and the dielectric material polyvinylphenol before the gate was applied by screen printing. All the processing was realized in ambient air on a PET flexible substrate. We explore the footprint and the practically accessible geometry of such devices with a special......Resume: Organic thin film transistors offer great potential for use in flexible electronics. Much of this potential lies in the solution processability of the organic polymers enabling both roll coating and printing on flexible substrates and thus greatly reducing the material and fabrication costs....... We present flexible organic power transistors prepared by fast (20 m min−1) roll-to-roll flexographic printing of the drain and source electrode structures, with an interspace below 50 um, directly on polyester foil[1]. The devices have top gate architecture and were completed by slotdie coating...

CMYKIR Separations for Printing on Transparent Polymer Materials

Directory of Open Access Journals (Sweden)

Martina Friščić

2015-09-01

Full Text Available Hidden information on food packaging are carried out with INFRAREDESIGN technology procedure. The procedure implicates merging of two independent visual RGB images, followed by compound separating in process CMYKIR components. Graphic reproduction embodies picture elements - pixels with two independent appearances in two light spectrum. The first range is a visual space that we see with the bare eye and the other range of the near infrared, that is registered instrumentally. One can distinguish two information using Z glasses that selected by the absorption of light at 1000 nm. Printing on a transparent polymer material, carrying a transparent image that is designed as a protective prints with individualized line forms. Dyes are mixed as twins respecting the norm DIN4 Flexographic rare and transparent dyes viscosity 22 s. The two dyes twins have the same spectrogram in the area of 400 to 700 nm, and different spectrogram Z point near infrared spectrum.

World Wide Web of Your Wide Web? Juridische aspecten van zoekmachine-personalisatie

NARCIS (Netherlands)

Oostveen, M.

2012-01-01

Het world wide web is een enorme bron van informatie. Iedere internetgebruiker maakt gebruik van zoekmachines om die informatie te kunnen vinden. Veel gebruikers weten echter niet dat zoekresultaten behorende bij een bepaalde zoekterm niet voor iedereen hetzelfde zijn. Dit personaliseren van

The World Wide Web Revisited

Science.gov (United States)

Owston, Ron

2007-01-01

Nearly a decade ago the author wrote in one of the first widely-cited academic articles, Educational Researcher, about the educational role of the web. He argued that educators must be able to demonstrate that the web (1) can increase access to learning, (2) must not result in higher costs for learning, and (3) can lead to improved learning. These…

Tim Berners-Lee, World Wide Web inventor

CERN Multimedia

1998-01-01

The "Internet, Web, What's next?" conference on 26 June 1998 at CERN: Tim Berners-Lee, inventor of the World Wide Web and Director of the W3C, explains how the Web came to be and gave his views on the future.

Happy 20th Birthday, World Wide Web!

CERN Multimedia

2009-01-01

On 13 March CERN celebrated the 20th anniversary of the World Wide Web. Check out the video interview with Web creator Tim Berners-Lee and find out more about the both the history and future of the Web. To celebrate CERN also launched a brand new website, CERNland, for kids.

Printed Identification Key or Web-Based Identification Guide: An Effective Tool for Species Identification?

Directory of Open Access Journals (Sweden)

Thomas Edison E. dela Cruz

2012-09-01

Full Text Available Species identification is often done with the aid of traditional dichotomous keys. This printed material is based on one’s decision between two alternatives, which is followed by another pair of alternatives until the final species name is reached. With the advent of internet technology, the use of an online database offers an updatable and accumulative approach to species identification. It can also be accessed anytime, and this is very useful for fast-changing groups of organisms. In this paper, we report the preference of sophomore Bachelor of Science (B.Sc. in Microbiology students to two identification guides as a tool in taxonomy. We wish to test our hypothesis that today’s students will prefer to use web-based ID guides over printed dichotomous keys. We also describe how these printed dichotomous key and web-based ID guides were used by the students as one of their laboratory activities in the course Biology of Algae and Fungi.  

Use of World Wide Web and NCSA Mcsaic at Langley

Science.gov (United States)

Nelson, Michael

1994-01-01

A brief history of the use of the World Wide Web at Langley Research Center is presented along with architecture of the Langley Web. Benefits derived from the Web and some Langley projects that have employed the World Wide Web are discussed.

A Web-Based and Print-Based Computer-Tailored Physical Activity Intervention for Prostate and Colorectal Cancer Survivors: A Comparison of User Characteristics and Intervention Use.

Science.gov (United States)

Golsteijn, Rianne Henrica Johanna; Bolman, Catherine; Peels, Denise Astrid; Volders, Esmee; de Vries, Hein; Lechner, Lilian

2017-08-23

Physical activity (PA) is beneficial in improving negative physical and psychological effects of cancer. The rapidly increasing number of cancer survivors, resulting from aging and improved cancer care, emphasizes the importance to develop and provide low cost, easy accessible PA programs. Such programs could be provided through the Internet, but that could result in the exclusion of cancer survivors not familiar with the Internet. Therefore, we developed a computer-tailored PA intervention for prostate and colorectal cancer survivors in which both Web-based and print materials are provided, and participants can choose their own preferred delivery mode. The aim of this study was to assess participants' characteristics related to delivery mode and use of intervention materials. We studied characteristics of participants using Web-based and printed intervention materials in a randomized controlled trial (RCT). Prostate and colorectal cancer survivors recruited from hospitals were randomized to OncoActive (computer-tailored PA intervention) or a usual-care control group. OncoActive participants received both Web-based and printed materials. Participants were classified into initial print- or Web-based participants based on their preferred mode of completion of the first questionnaire, which was needed for the computer-tailored PA advice. Intervention material use during the remainder of the intervention was compared for initial print- or Web-based participants. Additionally, participants were classified into those using only print materials and those using Web-based materials. Differences in participant characteristics and intervention material use were studied through analysis of variance (ANOVAs), chi-square tests, and logistic regressions. The majority of the participants in the intervention group were classified as initial Web-based participants (170/249, 68.3%), and 84.9% (191/249) used Web-based intervention materials. Dropout was low (15/249, 6.0%) and differed

An Evaluation of Web- and Print-Based Methods to Attract People to a Physical Activity Intervention.

Science.gov (United States)

Alley, Stephanie; Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

2016-05-27

Cost-effective and efficient methods to attract people to Web-based health behavior interventions need to be identified. Traditional print methods including leaflets, posters, and newspaper advertisements remain popular despite the expanding range of Web-based advertising options that have the potential to reach larger numbers at lower cost. This study evaluated the effectiveness of multiple Web-based and print-based methods to attract people to a Web-based physical activity intervention. A range of print-based (newspaper advertisements, newspaper articles, letterboxing, leaflets, and posters) and Web-based (Facebook advertisements, Google AdWords, and community calendars) methods were applied to attract participants to a Web-based physical activity intervention in Australia. The time investment, cost, number of first time website visits, the number of completed sign-up questionnaires, and the demographics of participants were recorded for each advertising method. A total of 278 people signed up to participate in the physical activity program. Of the print-based methods, newspaper advertisements totaled AUD $145, letterboxing AUD $135, leaflets AUD $66, posters AUD $52, and newspaper article AUD $3 per sign-up. Of the Web-based methods, Google AdWords totaled AUD $495, non-targeted Facebook advertisements AUD $68, targeted Facebook advertisements AUD $42, and community calendars AUD $12 per sign-up. Although the newspaper article and community calendars cost the least per sign-up, they resulted in only 17 and 6 sign-ups respectively. The targeted Facebook advertisements were the next most cost-effective method and reached a large number of sign-ups (n=184). The newspaper article and the targeted Facebook advertisements required the lowest time investment per sign-up (5 and 7 minutes respectively). People reached through the targeted Facebook advertisements were on average older (60 years vs 50 years, Padvertising is the most cost-effective and efficient method at

Utilization of the world wide web

International Nuclear Information System (INIS)

Mohr, P.; Mallard, G.; Ralchenko, U.; Schultz, D.

1998-01-01

Two aspects of utilization of the World Wide Web are examined: (i) the communication of technical data through web cites that provide repositories of atomic and molecular data accessible through searchable databases; and (ii) the communication about issues of mutual concern among data producers, data compilers and evaluators, and data users. copyright 1998 American Institute of Physics

Differences in reach and attrition between Web-based and print-delivered tailored interventions among adults over 50 years of age: clustered randomized trial.

Science.gov (United States)

Peels, Denise Astrid; Bolman, Catherine; Golsteijn, Rianne Henrica Johanna; De Vries, Hein; Mudde, Aart Nicolaas; van Stralen, Maartje Marieke; Lechner, Lilian

2012-12-17

The Internet has the potential to provide large populations with individual health promotion advice at a relatively low cost. Despite the high rates of Internet access, actual reach by Web-based interventions is often disappointingly low, and differences in use between demographic subgroups are present. Furthermore, Web-based interventions often have to deal with high rates of attrition. This study aims to assess user characteristics related to participation and attrition when comparing Web-based and print-delivered tailored interventions containing similar content and thereby to provide recommendations in choosing the appropriate delivery mode for a particular target audience. We studied the distribution of a Web-based and a print-delivered version of the Active Plus intervention in a clustered randomized controlled trial (RCT). Participants were recruited via direct mailing within the participating Municipal Health Council regions and randomized to the printed or Web-based intervention by their region. Based on the answers given in a prior assessment, participants received tailored advice on 3 occasions: (1) within 2 weeks after the baseline, (2) 2 months after the baseline, and (3) within 4 months after the baseline (based on a second assessment at 3 months). The baseline (printed or Web-based) results were analyzed using ANOVA and chi-square tests to establish the differences in user characteristics between both intervention groups. We used logistic regression analyses to study the interaction between the user characteristics and the delivery mode in the prediction of dropout rate within the intervention period. The printed intervention resulted in a higher participation rate (19%) than the Web-based intervention (12%). Participants of the Web-based intervention were significantly younger (PWeb-based intervention group (53%) compared to the print-delivered intervention (39%, PWeb-based and the printed intervention was not explained by user characteristics. The

Online and print newspapers in Europe in 2003. Evolving towards complementarity

NARCIS (Netherlands)

van der Wurff, R.; Lauf, E.; Balčytienė, A.; Fortunati, L.; Holmberg, S.L.; Paulussen, S.; Salaverría, R.

2008-01-01

This article assesses online newspapers in Europe from a media evolutionary perspective, ten years after the introduction of the World Wide Web. Comparing print and online front pages of 51 newspapers in 14 countries in 2003, we argue that online newspapers complement print newspapers in modest

Comparing image quality of print-on-demand books and photobooks from web-based vendors

Science.gov (United States)

Phillips, Jonathan; Bajorski, Peter; Burns, Peter; Fredericks, Erin; Rosen, Mitchell

2010-01-01

Because of the emergence of e-commerce and developments in print engines designed for economical output of very short runs, there are increased business opportunities and consumer options for print-on-demand books and photobooks. The current state of these printing modes allows for direct uploading of book files via the web, printing on nonoffset printers, and distributing by standard parcel or mail delivery services. The goal of this research is to assess the image quality of print-on-demand books and photobooks produced by various Web-based vendors and to identify correlations between psychophysical results and objective metrics. Six vendors were identified for one-off (single-copy) print-on-demand books, and seven vendors were identified for photobooks. Participants rank ordered overall quality of a subset of individual pages from each book, where the pages included text, photographs, or a combination of the two. Observers also reported overall quality ratings and price estimates for the bound books. Objective metrics of color gamut, color accuracy, accuracy of International Color Consortium profile usage, eye-weighted root mean square L*, and cascaded modulation transfer acutance were obtained and compared to the observer responses. We introduce some new methods for normalizing data as well as for strengthening the statistical significance of the results. Our approach includes the use of latent mixed-effect models. We found statistically significant correlation with overall image quality and some of the spatial metrics, but correlations between psychophysical results and other objective metrics were weak or nonexistent. Strong correlation was found between psychophysical results of overall quality assessment and estimated price associated with quality. The photobook set of vendors reached higher image-quality ratings than the set of print-on-demand vendors. However, the photobook set had higher image-quality variability.

Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques

DEFF Research Database (Denmark)

Genina, Natalja; Fors, Daniela; Vakili, Hossein

2012-01-01

substrates: A (uncoated woodfree paper), B (triple-coated inkjet paper) and C (double-coated sheet fed offset paper) were used as porous model carriers for drug delivery. Active pharmaceutical ingredient (API) containing solutions were printed onto 1 cm × 1 cm substrate areas using an inkjet printer...

Uses and Gratifications of the World Wide Web: From Couch Potato to Web Potato.

Science.gov (United States)

Kaye, Barbara K.

1998-01-01

Investigates uses and gratifications of the World Wide Web and its impact on traditional mass media, especially television. Identifies six Web use motivations: entertainment, social interaction, passing of time, escape, information, and Web site preference. Examines relationships between each use motivation and Web affinity, perceived realism, and…

Studying Acute Coronary Syndrome Through the World Wide Web: Experiences and Lessons.

Science.gov (United States)

Alonzo, Angelo A

2017-10-13

This study details my viewpoint on the experiences, lessons, and assessments of conducting a national study on care-seeking behavior for heart attack in the United States utilizing the World Wide Web. The Yale Heart Study (YHS) was funded by the National Heart, Lung, and Blood Institute (NHLBI) of the National Institutes of Health (NIH). Grounded on two prior studies, the YHS combined a Web-based interview survey instrument; ads placed on the Internet; flyers and posters in public libraries, senior centers, and rehabilitation centers; information on chat rooms; a viral marketing strategy; and print ads to attract potential participants to share their heart attack experiences. Along the way, the grant was transferred from Ohio State University (OSU) to Yale University, and significant administrative, information technology, and personnel challenges ensued that materially delayed the study's execution. Overall, the use of the Internet to collect data on care-seeking behavior is very time consuming and emergent. The cost of using the Web was approximately 31% less expensive than that of face-to-face interviews. However, the quality of the data may have suffered because of the absence of some data compared with interviewing participants. Yet the representativeness of the 1154 usable surveys appears good, with the exception of a dearth of African American participants. ©Angelo A Alonzo. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 13.10.2017.

Preparation and Characterization of Water Based UV Curable ...

African Journals Online (AJOL)

The formulations prepared were characterized for viscosity and FT-IR before being printed on different substrates. The ink films formed were assessed by optical microscopy, the print quality was found to meet most requirements in colour printing chemistry and technology applications. Keywords: Flexographic printing inks, ...

GeoCENS: a geospatial cyberinfrastructure for the world-wide sensor web.

Science.gov (United States)

Liang, Steve H L; Huang, Chih-Yuan

2013-10-02

The world-wide sensor web has become a very useful technique for monitoring the physical world at spatial and temporal scales that were previously impossible. Yet we believe that the full potential of sensor web has thus far not been revealed. In order to harvest the world-wide sensor web's full potential, a geospatial cyberinfrastructure is needed to store, process, and deliver large amount of sensor data collected worldwide. In this paper, we first define the issue of the sensor web long tail followed by our view of the world-wide sensor web architecture. Then, we introduce the Geospatial Cyberinfrastructure for Environmental Sensing (GeoCENS) architecture and explain each of its components. Finally, with demonstration of three real-world powered-by-GeoCENS sensor web applications, we believe that the GeoCENS architecture can successfully address the sensor web long tail issue and consequently realize the world-wide sensor web vision.

An Evaluation of Web- and Print-Based Methods to Attract People to a Physical Activity Intervention

Science.gov (United States)

Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

2016-01-01

Background Cost-effective and efficient methods to attract people to Web-based health behavior interventions need to be identified. Traditional print methods including leaflets, posters, and newspaper advertisements remain popular despite the expanding range of Web-based advertising options that have the potential to reach larger numbers at lower cost. Objective This study evaluated the effectiveness of multiple Web-based and print-based methods to attract people to a Web-based physical activity intervention. Methods A range of print-based (newspaper advertisements, newspaper articles, letterboxing, leaflets, and posters) and Web-based (Facebook advertisements, Google AdWords, and community calendars) methods were applied to attract participants to a Web-based physical activity intervention in Australia. The time investment, cost, number of first time website visits, the number of completed sign-up questionnaires, and the demographics of participants were recorded for each advertising method. Results A total of 278 people signed up to participate in the physical activity program. Of the print-based methods, newspaper advertisements totaled AUD $145, letterboxing AUD $135, leaflets AUD $66, posters AUD $52, and newspaper article AUD $3 per sign-up. Of the Web-based methods, Google AdWords totaled AUD $495, non-targeted Facebook advertisements AUD $68, targeted Facebook advertisements AUD $42, and community calendars AUD $12 per sign-up. Although the newspaper article and community calendars cost the least per sign-up, they resulted in only 17 and 6 sign-ups respectively. The targeted Facebook advertisements were the next most cost-effective method and reached a large number of sign-ups (n=184). The newspaper article and the targeted Facebook advertisements required the lowest time investment per sign-up (5 and 7 minutes respectively). People reached through the targeted Facebook advertisements were on average older (60 years vs 50 years, PFacebook advertising is the

World-Wide Web: The Information Universe.

Science.gov (United States)

Berners-Lee, Tim; And Others

1992-01-01

Describes the World-Wide Web (W3) project, which is designed to create a global information universe using techniques of hypertext, information retrieval, and wide area networking. Discussion covers the W3 data model, W3 architecture, the document naming scheme, protocols, document formats, comparison with other systems, experience with the W3…

Flexible transparent conductive films combining flexographic printed silver grids with CNT coating

International Nuclear Information System (INIS)

Mo, Lixin; Fang, Yi; Zhai, Qingbin; Li, Luhai; Ran, Jun; Yang, Li

2016-01-01

A high-performance ITO-free transparent conductive film (TCF) has been made by combining high resolution Ag grids with a carbon nanotube (CNT) coating. Ag grids printed with flexography have a 20 μm line width at a grid interval of 400 μm. The Ag grid/CNT hybrid film exhibits excellent overall performance, with a typical sheet resistance of 14.8 Ω/□ and 82.6% light transmittance at room temperature. This means a 23.98% reduction in sheet resistance and only 2.52% loss in transmittance compared to a pure Ag grid film. Analysis indicates that filling areas between the Ag grids and interconnecting the silver nanoparticles with the CNT coating are the primary reasons for the significantly improved conductivity of the hybrid film that also exhibits excellent flexibility and mechanical strength compared to an ITO film. The hybrid film may fully satisfy the requirements of different applications, e.g. use as the anode of polymer solar cells (PSCs). The J–V curve shows that the power conversion efficiency (PCE) of the PSCs using the Ag grid/CNT hybrid anode is 0.61%, which is 24.5% higher than that of the pure Ag grids with a PCE of 0.49%. Further investigations to improve the performance of the solar cells based on the printed hybrid TCFs are ongoing. (paper)

U.S. Geological Survey World Wide Web Information

Science.gov (United States)

,

2003-01-01

The U.S. Geological Survey (USGS) invites you to explore an earth science virtual library of digital information, publications, and data. The USGS World Wide Web sites offer an array of information that reflects scientific research and monitoring programs conducted in the areas of natural hazards, environmental resources, and cartography. This list provides gateways to access a cross section of the digital information on the USGS World Wide Web sites.

Tim Berners-Lee, World Wide Web inventor

CERN Multimedia

1994-01-01

Former physicist, Tim Berners-Lee invented the World Wide Web as an essential tool for high energy physics at CERN from 1989 to 1994. Together with a small team he conceived HTML, http, URLs, and put up the first server and the first 'what you see is what you get' browser and html editor. Tim is now Director of the Web Consortium W3C, the International Web standards body based at INRIA, MIT and Keio University.

The World Wide Web and the Television Generation.

Science.gov (United States)

Maddux, Cleborne D.

1996-01-01

The hypermedia nature of the World Wide Web may represent a true paradigm shift in telecommunications, but barriers exist to the Web having similar impact on education. Some of today's college students compare the Web with "bad TV"--lengthy pauses, links that result in error messages, and animation and sound clips that are too brief.…

Playing with the internet through world wide web

International Nuclear Information System (INIS)

Kim, Seon Tae; Jang, Jin Seok

1995-07-01

This book describes how to use the internet with world wide web. It is divided into six chapters, which are Let's go to the internet ocean, the internet in information superhighway are, connecting the world with a telephone wire such as link with the internet cable and telephone modem, internet service providers, text mode connection, Domain and IP address, the principle and use of world wide web ; business, music, fashion, movie and photo, internet news and e-mail, making internet map with web language, and from installation to application of base program such as TCP/IP, SLIP/PPP 3270 Emulator, Finger and NCSA Mosaic.

Defense Additive Manufacturing: DOD Needs to Systematically Track Department-wide 3D Printing Efforts

Science.gov (United States)

2015-10-01

the chair of the group, while the teams each have some level of activity in additive manufacturing , it is not identified as one of the teams. Page...DEFENSE ADDITIVE MANUFACTURING DOD Needs to Systematically Track Department-wide 3D Printing Efforts Report to...2015 to 00-00-2015 4. TITLE AND SUBTITLE Defense Additive Manufacturing : DOD Needs to Systematically Track Department-wide 3D Printing Efforts 5a

GeoCENS: A Geospatial Cyberinfrastructure for the World-Wide Sensor Web

Directory of Open Access Journals (Sweden)

Steve H.L. Liang

2013-10-01

Full Text Available The world-wide sensor web has become a very useful technique for monitoring the physical world at spatial and temporal scales that were previously impossible. Yet we believe that the full potential of sensor web has thus far not been revealed. In order to harvest the world-wide sensor web’s full potential, a geospatial cyberinfrastructure is needed to store, process, and deliver large amount of sensor data collected worldwide. In this paper, we first define the issue of the sensor web long tail followed by our view of the world-wide sensor web architecture. Then, we introduce the Geospatial Cyberinfrastructure for Environmental Sensing (GeoCENS architecture and explain each of its components. Finally, with demonstration of three real-world powered-by-GeoCENS sensor web applications, we believe that the GeoCENS architecture can successfully address the sensor web long tail issue and consequently realize the world-wide sensor web vision.

Assessing the quality of infertility resources on the World Wide Web: tools to guide clients through the maze of fact and fiction.

Science.gov (United States)

Okamura, Kyoko; Bernstein, Judith; Fidler, Anne T

2002-01-01

The Internet has become a major source of health information for women, but information placed on the World Wide Web does not routinely undergo a peer review process before dissemination. In this study, we present an analysis of 197 infertility-related Web sites for quality and accountability, using JAMA's minimal core standards for responsible print. Only 2% of the web sites analyzed met all four recommended standards, and 50.8% failed to report any of the four. Commercial web sites were more likely to fail to meet minimum standards (71.2%) than those with educational (46.8%) or supportive (29.8%) elements. Web sites with educational and informational components were most common (70.6%), followed by commercial sites (52.8%) and sites that offered a forum for infertility support and activism (28.9%). Internet resources available to infertile patients are at best variable. The current state of infertility-related materials on the World Wide Web offers unprecedented opportunities to improve services to a growing number of e-health users. Because of variations in quality of site content, women's health clinicians must assume responsibility for a new role as information monitor. This study provides assessment tools clinicians can apply and share with clients.

Surfing the World Wide Web to Education Hot-Spots.

Science.gov (United States)

Dyrli, Odvard Egil

1995-01-01

Provides a brief explanation of Web browsers and their use, as well as technical information for those considering access to the WWW (World Wide Web). Curriculum resources and addresses to useful Web sites are included. Sidebars show sample searches using Yahoo and Lycos search engines, and a list of recommended Web resources. (JKP)

The World Wide Web of War

National Research Council Canada - National Science Library

Smith, Craig A

2006-01-01

Modern communications, combined with the near instantaneous publication of information on the World Wide Web, are providing the means to dramatically affect the pursuit, conduct, and public opinion of war on both sides...

An information filtering system prototype for world wide web; Prototipo di sistema di information filtering per world wide web

Energy Technology Data Exchange (ETDEWEB)

Bordoni, L [ENEA Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy). Funzione Centrale Studi

1999-07-01

In this report the architecture of an information filtering system for world wide web, developed by the Rome Third University (Italy) for ENEA (National Agency for New Technology, Energy and the Environment), is described. This prototype allows for selecting documents in text/HTML format from the web according to the interests of users. A user modeling shell allows ro build a model of user's interests, obtained during the interaction. The experimental results support the choice of embedding methods for this kind of application. [Italian] In questo rapporto viene descritta l'architettura di un sistema adattivo di information filtering su world wide web, sviluppato dall'universita' di Roma III in collaborazione con l'ENEA. Il prototipo descritto e' in grado di selezionare documenti in formato testo/html, raccolti dal web, in accordo con le caratteristiche e gli interessi degli utenti. Una shell di modellazione utente consente di costruire un modello degli interessi dell'utente, ottenuto nel corso dell'interazione. I risultati sperimentali rafforzano la scelta di usare metodi di modellazione utente per questo genere di applicazioni.

World Wide Web Homepage Design.

Science.gov (United States)

Tillman, Michael L.

This paper examines hypermedia design and draws conclusions about how educational research and theory applies to various aspects of World Wide Web (WWW) homepage design. "Hypermedia" is defined as any collection of information which may be textual, graphical, visual, or auditory in nature and which may be accessed via a nonlinear route.…

Using the World Wide Web To Teach Francophone Culture.

Science.gov (United States)

Beyer, Deborah Berg; Van Ells, Paula Hartwig

2002-01-01

Examined use of the World Wide Web to teach Francophone culture. Suggests that bolstering reading comprehension in the foreign language and increased proficiency in navigating the Web are potential secondary benefits gained from the cultural Web-based activities proposed in the study.(Author/VWL)

Contextual advertisement placement in printed media

Science.gov (United States)

Liu, Sam; Joshi, Parag

2010-02-01

Advertisements today provide the necessary revenue model supporting the WWW ecosystem. Targeted or contextual ad insertion plays an important role in optimizing the financial return of this model. Nearly all the current ads that appear on web sites are geared for display purposes such as banner and "pay-per-click". Little attention, however, is focused on deriving additional ad revenues when the content is repurposed for alternative mean of presentation, e.g. being printed. Although more and more content is moving to the Web, there are still many occasions where printed output of web content is desirable, such as maps and articles; thus printed ad insertion can potentially be lucrative. In this paper, we describe a contextual ad insertion network aimed to realize new revenue for print service providers for web printing. We introduce a cloud print service that enables contextual ads insertion, with respect to the main web page content, when a printout of the page is requested. To encourage service utilization, it would provide higher quality printouts than what is possible from current browser print drivers, which generally produce poor outputs, e.g. ill formatted pages. At this juncture we will limit the scope to only article-related web pages although the concept can be extended to arbitrary web pages. The key components of this system include (1) the extraction of article from web pages, (2) the extraction of semantics from article, (3) querying the ad database for matching advertisement or coupon, and (4) joint content and ad layout for print outputs.

Maximizing Impact: Pairing interactive web visualizations with traditional print media

Science.gov (United States)

Read, E. K.; Appling, A.; Carr, L.; De Cicco, L.; Read, J. S.; Walker, J. I.; Winslow, L. A.

2016-12-01

Our Nation's rapidly growing store of environmental data makes new demands on researchers: to take on increasingly broad-scale, societally relevant analyses and to rapidly communicate findings to the public. Interactive web-based data visualizations now commonly supplement or comprise journalism, and science journalism has followed suit. To maximize the impact of US Geological Survey (USGS) science, the USGS Office of Water Information Data Science team builds tools and products that combine traditional static research products (e.g., print journal articles) with web-based, interactive data visualizations that target non-scientific audiences. We developed a lightweight, open-source framework for web visualizations to reduce time to production. The framework provides templates for a data visualization workflow and the packaging of text, interactive figures, and images into an appealing web interface with standardized look and feel, usage tracking, and responsiveness. By partnering with subject matter experts to focus on timely, societally relevant issues, we use these tools to produce appealing visual stories targeting specific audiences, including managers, the general public, and scientists, on diverse topics including drought, microplastic pollution, and fisheries response to climate change. We will describe the collaborative and technical methodologies used; describe some examples of how it's worked; and challenges and opportunities for the future.

An information filtering system prototype for world wide web; Prototipo di sistema di information filtering per world wide web

Energy Technology Data Exchange (ETDEWEB)

Bordoni, L. [ENEA Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy). Funzione Centrale Studi

1999-07-01

In this report the architecture of an information filtering system for world wide web, developed by the Rome Third University (Italy) for ENEA (National Agency for New Technology, Energy and the Environment), is described. This prototype allows for selecting documents in text/HTML format from the web according to the interests of users. A user modeling shell allows ro build a model of user's interests, obtained during the interaction. The experimental results support the choice of embedding methods for this kind of application. [Italian] In questo rapporto viene descritta l'architettura di un sistema adattivo di information filtering su world wide web, sviluppato dall'universita' di Roma III in collaborazione con l'ENEA. Il prototipo descritto e' in grado di selezionare documenti in formato testo/html, raccolti dal web, in accordo con le caratteristiche e gli interessi degli utenti. Una shell di modellazione utente consente di costruire un modello degli interessi dell'utente, ottenuto nel corso dell'interazione. I risultati sperimentali rafforzano la scelta di usare metodi di modellazione utente per questo genere di applicazioni.

The Organic Power Transistor: Roll-to-Roll Manufacture, Thermal Behavior, and Power Handling When Driving Printed Electronics

DEFF Research Database (Denmark)

Pastorelli, Francesco; Schmidt, Thomas Mikael; Hösel, Markus

2016-01-01

to drive large currents while handling the thermal aspects in operation together with other organic printed electronics technologies such as large area organic photovoltaics (OPV)[2] and large area electrochromic displays (EC).[3] We find especially that an elevated operational temperature is beneficial...... with respect to both transconductance and on/off ratio. We achieve high currents of up to 45mA at a temperature of 80 C with an on/ off ratio of 100 which is sufficient to drive large area organic electronics such as an EC device powered by OPV devices that we also demonstrate. Finally, we observe......We present flexible organic power transistors prepared by fast (20mmin1) roll-to-roll (R2R) flexographic printing[1] of the drain (D) and source (S) electrode structures directly on polyester foil. The devices have top gate architecture and were completed by spin coating or slot-die coating...

Collecting behavioural data using the world wide web: considerations for researchers.

Science.gov (United States)

Rhodes, S D; Bowie, D A; Hergenrather, K C

2003-01-01

To identify and describe advantages, challenges, and ethical considerations of web based behavioural data collection. This discussion is based on the authors' experiences in survey development and study design, respondent recruitment, and internet research, and on the experiences of others as found in the literature. The advantages of using the world wide web to collect behavioural data include rapid access to numerous potential respondents and previously hidden populations, respondent openness and full participation, opportunities for student research, and reduced research costs. Challenges identified include issues related to sampling and sample representativeness, competition for the attention of respondents, and potential limitations resulting from the much cited "digital divide", literacy, and disability. Ethical considerations include anonymity and privacy, providing and substantiating informed consent, and potential risks of malfeasance. Computer mediated communications, including electronic mail, the world wide web, and interactive programs will play an ever increasing part in the future of behavioural science research. Justifiable concerns regarding the use of the world wide web in research exist, but as access to, and use of, the internet becomes more widely and representatively distributed globally, the world wide web will become more applicable. In fact, the world wide web may be the only research tool able to reach some previously hidden population subgroups. Furthermore, many of the criticisms of online data collection are common to other survey research methodologies.

Business use of the World-Wide Web

Directory of Open Access Journals (Sweden)

C. Cockburn

1995-01-01

Full Text Available Two methods were employed in this study of the use of the World Wide Web by business: first, a sample of 300 businesses with Web sites, across a wide range of industry types, was examined, by selecting (rather than sampling companies from the Yahoo! directory. The sites were investigated in relation to several areas - the purpose of the Web site, the use being made of electronic mail and the extent to which multi-media was being utilised. In addition, any other aspects of the site which were designed to make it more interesting to potential customers were also noted. Secondly, an electronic-mail questionnaire was sent to 222 of the 300 companies surveyed: that is, those that provided an e-mail address for contact. 14 were returned immediately due to unknown addresses or technical problems. Of the remaining 208, 102 replies were received, five of which were of no relevance, leaving 97 completed questionnaires to examine; a response rate of 47%, which is surprisingly good for a survey of this kind.

Forensic web watch.

Science.gov (United States)

Abbas, Ali; N Rutty, Guy

2003-06-01

When one thinks of print identification techniques one automatically considers fingerprints. Although finger prints have been in use now for over 100 years there is in fact an older type of identification technique related to prints left at scenes of crime and the anatomy of human body parts. This is the world of ear prints. This short web review considers web sites related to ear print identification particularly the continuing controversy as to whether or not an ear print is unique.

Re-Framing the World Wide Web

Science.gov (United States)

Black, August

2011-01-01

The research presented in this dissertation studies and describes how technical standards, protocols, and application programming interfaces (APIs) shape the aesthetic, functional, and affective nature of our most dominant mode of online communication, the World Wide Web (WWW). I examine the politically charged and contentious battle over browser…

Process Support for Cooperative Work on the World Wide Web

NARCIS (Netherlands)

Sikkel, Nicolaas; Neumann, Olaf; Sachweh, Sabine

The World Wide Web is becoming a dominating factor in information technology. Consequently, computer supported cooperative work on the Web has recently drawn a lot of attention. Process Support for Cooperative Work (PSCW) is a Web based system supporting both structured and unstructured forms of

WorldWide Web: Hypertext from CERN.

Science.gov (United States)

Nickerson, Gord

1992-01-01

Discussion of software tools for accessing information on the Internet focuses on the WorldWideWeb (WWW) system, which was developed at the European Particle Physics Laboratory (CERN) in Switzerland to build a worldwide network of hypertext links using available networking technology. Its potential for use with multimedia documents is also…

WebPresent: a World Wide Web-based telepresentation tool for physicians

Science.gov (United States)

Sampath-Kumar, Srihari; Banerjea, Anindo; Moshfeghi, Mehran

1997-05-01

In this paper, we present the design architecture and the implementation status of WebPresent - a world wide web based tele-presentation tool. This tool allows a physician to use a conference server workstation and make a presentation of patient cases to a geographically distributed audience. The audience consists of other physicians collaborating on patients' health care management and physicians participating in continuing medical education. These physicians are at several locations with networks of different bandwidth and capabilities connecting them. Audiences also receive the patient case information on different computers ranging form high-end display workstations to laptops with low-resolution displays. WebPresent is a scalable networked multimedia tool which supports the presentation of hypertext, images, audio, video, and a white-board to remote physicians with hospital Intranet access. WebPresent allows the audience to receive customized information. The data received can differ in resolution and bandwidth, depending on the availability of resources such as display resolution and network bandwidth.

Internet and The World Wide Web

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 2. Internet and The World Wide Web. Neelima Shrikhande. General Article Volume 2 Issue 2 February 1997 pp 64-74. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/002/02/0064-0074 ...

Enhancing Accessibility of Web Content for the Print-Impaired and Blind People

Science.gov (United States)

Chalamandaris, Aimilios; Raptis, Spyros; Tsiakoulis, Pirros; Karabetsos, Sotiris

Blind people and in general print-impaired people are often restricted to use their own computers, enhanced most often with expensive, screen reading programs, in order to access the web, and in a form that every screen reading program allows to. In this paper we present SpellCast Navi, a tool that is intended for people with visual impairments, which attempts to combine advantages from both customized and generic web enhancement tools. It consists of a generically designed engine and a set of case-specific filters. It can run on a typical web browser and computer, without the need of installing any additional application locally. It acquires and parses the content of web pages, converts bi-lingual text into synthetic speech using high quality speech synthesizer, and supports a set of common functionalities such as navigation through hotkeys, audible navigation lists and more. By using a post-hoc approach based on a-priori information of the website's layout, the audible presentation and navigation through the website is more intuitive a more efficient than with a typical screen reading application. SpellCast Navi poses no requirements on web pages and introduces no overhead to the design and development of a website, as it functions as a hosted proxy service.

A World Wide Web Region-Based Image Search Engine

DEFF Research Database (Denmark)

Kompatsiaris, Ioannis; Triantafyllou, Evangelia; Strintzis, Michael G.

2001-01-01

In this paper the development of an intelligent image content-based search engine for the World Wide Web is presented. This system will offer a new form of media representation and access of content available in WWW. Information Web Crawlers continuously traverse the Internet and collect images...

World-Wide Web the information universe

CERN Document Server

Berners-Lee, Tim; Groff, Jean-Francois; Pollermann, Bernd

1992-01-01

Purpose - The World-Wide Web (W-3) initiative is a practical project designed to bring a global information universe into existence using available technology. This paper seeks to describe the aims, data model, and protocols needed to implement the "web" and to compare them with various contemporary systems. Design/methodology/approach - Since Vannevar Bush's article, men have dreamed of extending their intellect by making their collective knowledge available to each individual by using machines. Computers provide us two practical techniques for human-knowledge interface. One is hypertext, in which links between pieces of text (or other media) mimic human association of ideas. The other is text retrieval, which allows associations to be deduced from the content of text. The W-3 ideal world allows both operations and provides access from any browsing platform. Findings - Various server gateways to other information systems have been produced, and the total amount of information available on the web is...

Teaching Critical Evaluation Skills for World Wide Web Resources.

Science.gov (United States)

Tate, Marsha; Alexander, Jan

1996-01-01

Outlines a lesson plan used by an academic library to evaluate the quality of World Wide Web information. Discusses the traditional evaluation criteria of accuracy, authority, objectivity, currency, and coverage as it applies to the unique characteristics of Web pages: their marketing orientation, variety of information, and instability. The…

Information about liver transplantation on the World Wide Web.

Science.gov (United States)

Hanif, F; Sivaprakasam, R; Butler, A; Huguet, E; Pettigrew, G J; Michael, E D A; Praseedom, R K; Jamieson, N V; Bradley, J A; Gibbs, P

2006-09-01

Orthotopic liver transplant (OLTx) has evolved to a successful surgical management for end-stage liver diseases. Awareness and information about OLTx is an important tool in assisting OLTx recipients and people supporting them, including non-transplant clinicians. The study aimed to investigate the nature and quality of liver transplant-related patient information on the World Wide Web. Four common search engines were used to explore the Internet by using the key words 'Liver transplant'. The URL (unique resource locator) of the top 50 returns was chosen as it was judged unlikely that the average user would search beyond the first 50 sites returned by a given search. Each Web site was assessed on the following categories: origin, language, accessibility and extent of the information. A weighted Information Score (IS) was created to assess the quality of clinical and educational value of each Web site and was scored independently by three transplant clinicians. The Internet search performed with the aid of the four search engines yielded a total of 2,255,244 Web sites. Of the 200 possible sites, only 58 Web sites were assessed because of repetition of the same Web sites and non-accessible links. The overall median weighted IS was 22 (IQR 1 - 42). Of the 58 Web sites analysed, 45 (77%) belonged to USA, six (10%) were European, and seven (12%) were from the rest of the world. The median weighted IS of publications originating from Europe and USA was 40 (IQR = 22 - 60) and 23 (IQR = 6 - 38), respectively. Although European Web sites produced a higher weighted IS [40 (IQR = 22 - 60)] as compared with the USA publications [23 (IQR = 6 - 38)], this was not statistically significant (p = 0.07). Web sites belonging to the academic institutions and the professional organizations scored significantly higher with a median weighted IS of 28 (IQR = 16 - 44) and 24(12 - 35), respectively, as compared with the commercial Web sites (median = 6 with IQR of 0 - 14, p = .001). There

Sources of Militaria on the World Wide Web | Walker | Scientia ...

African Journals Online (AJOL)

Having an interest in military-type topics is one thing, finding information on the web to quench your thirst for knowledge is another. The World Wide Web (WWW) is a universal electronic library that contains millions of web pages. As well as being fun, it is an addictive tool on which to search for information. To prevent hours ...

Presidential Green Chemistry Challenge: 2006 Small Business Award

Science.gov (United States)

Presidential Green Chemistry Challenge 2006 award winners, Arkon Consultants and NuPro Technologies, developed a safer processing system for flexographic printing that includes washout solvents and reclamation/recycling.

Integrating Temporal Media and Open Hypermedia on the World Wide Web

DEFF Research Database (Denmark)

Bouvin, Niels Olof; Schade, René

1999-01-01

The World Wide Web has since its beginning provided linking to and from text documents encoded in HTML. The Web has evolved and most Web browsers now support a rich set of media types either by default or by the use of specialised content handlers, known as plug-ins. The limitations of the Web...

Printing polymer optical waveguides on conditioned transparent flexible foils by using the aerosol jet technology

Science.gov (United States)

Reitberger, Thomas; Hoffmann, Gerd-Albert; Wolfer, Tim; Overmeyer, Ludger; Franke, Joerg

2016-09-01

The optical data transfer is considered as the future of signal transfer due to its various advantages compared to conventional copper-based technologies. The Aerosol Jet Printing (AJP) technology offers the opportunity to print materials with high viscosities, such as liquid transparent polymer adhesives (epoxy resins), on almost any possible substrate material and even in third dimension. This paper introduces a new flexible and comparatively cost-effective way of generating polymer optical waveguides through AJP. Furthermore, the conditioning of the substrate material and the printing process of planar waveguides are presented. In the first step, two lines with hydrophobic behavior are applied on foil material (PMMA, PVC, PI) by using a flexographic printing machine. These silicone based patterns containing functional polymer form barriers for the core material due to their low surface energy after curing. In the second step, the core material (liquid polymer, varnish) is printed between the barrier lines. Because of the hydrophobic behavior of the lines, the contact angle between the substrate surface and the liquid core material is increased which yields to higher aspect ratio. The distance between the barrier lines is at least 100 μm, which defines the width of the waveguide. The minimum height of the core shall be 50 μm. After UV-curing of the core polymer, the cladding material is printed on the top. This is also applied by using the AJP technology. Various tests were performed to achieve the optimal surface properties for adequate adhesion and machine process parameters.

So Wide a Web, So Little Time.

Science.gov (United States)

McConville, David; And Others

1996-01-01

Discusses new trends in the World Wide Web. Highlights include multimedia; digitized audio-visual files; compression technology; telephony; virtual reality modeling language (VRML); open architecture; and advantages of Java, an object-oriented programming language, including platform independence, distributed development, and pay-per-use software.…

Business use of the World Wide Web: a report on further investigations

Directory of Open Access Journals (Sweden)

Hooi-Im Ng

1998-01-01

Full Text Available As a continuation of a previous study this paper reports on a series of studies into business use of the World Wide Web and, more generally the Internet. The use of the World Wide Web as a business tool has increased rapidly for the past three years, and the benefits of the World Wide Web to business and customers are discussed, together with the barriers that hold back future development of electronic commerce. As with the previous study we report on a desk survey of 300 randomly selected business Web sites and on the results of an electronic mail questionnaire sent to the sample companies. An extended version of this paper has been submitted to the International Journal of Information Management

Internet printing

Science.gov (United States)

Rahgozar, M. Armon; Hastings, Tom; McCue, Daniel L.

1997-04-01

The Internet is rapidly changing the traditional means of creation, distribution and retrieval of information. Today, information publishers leverage the capabilities provided by Internet technologies to rapidly communicate information to a much wider audience in unique customized ways. As a result, the volume of published content has been astronomically increasing. This, in addition to the ease of distribution afforded by the Internet has resulted in more and more documents being printed. This paper introduces several axes along which Internet printing may be examined and addresses some of the technological challenges that lay ahead. Some of these axes include: (1) submission--the use of the Internet protocols for selecting printers and submitting documents for print, (2) administration--the management and monitoring of printing engines and other print resources via Web pages, and (3) formats--printing document formats whose spectrum now includes HTML documents with simple text, layout-enhanced documents with Style Sheets, documents that contain audio, graphics and other active objects as well as the existing desktop and PDL formats. The format axis of the Internet Printing becomes even more exciting when one considers that the Web documents are inherently compound and the traversal into the various pieces may uncover various formats. The paper also examines some imaging specific issues that are paramount to Internet Printing. These include formats and structures for representing raster documents and images, compression, fonts rendering and color spaces.

News Resources on the World Wide Web.

Science.gov (United States)

Notess, Greg R.

1996-01-01

Describes up-to-date news sources that are presently available on the Internet and World Wide Web. Highlights include electronic newspapers; AP (Associated Press) sources and Reuters; sports news; stock market information; New York Times; multimedia capabilities, including CNN Interactive; and local and regional news. (LRW)

Golden Jubilee Photos: World Wide Web

CERN Multimedia

2004-01-01

At the end of the 1980s, the Internet was already a valuable tool to scientists, allowing them to exchange e-mails and to access powerful computers remotely. A more simple means of sharing information was needed, however, and CERN, with its long tradition of informatics and networking, was the ideal place to find it. Moreover, hundreds of scientists from all over the world were starting to work together on preparations for the experiments at the Large Electron-Positron (LEP) collider. In 1989, Tim Berners-Lee (see photo), a young scientist working at CERN, drafted a proposal for an information-management system combining the internet, personal computers and computer-aided document consultation, known as hypertext. In 1990 he was joined by Robert Cailliau and the weaving of the World Wide Web began in earnest, even though only two CERN computers were allocated to the task at the time. The Web subsequently underwent a steady expansion to include the world's main particle physics institutes. The Web was not the...

Judging nursing information on the world wide web.

Science.gov (United States)

Cader, Raffik

2013-02-01

The World Wide Web is increasingly becoming an important source of information for healthcare professionals. However, finding reliable information from unauthoritative Web sites to inform healthcare can pose a challenge to nurses. A study, using grounded theory, was undertaken in two phases to understand how qualified nurses judge the quality of Web nursing information. Data were collected using semistructured interviews and focus groups. An explanatory framework that emerged from the data showed that the judgment process involved the application of forms of knowing and modes of cognition to a range of evaluative tasks and depended on the nurses' critical skills, the time available, and the level of Web information cues. This article mainly focuses on the six evaluative tasks relating to assessing user-friendliness, outlook and authority of Web pages, and relationship to nursing practice; appraising the nature of evidence; and applying cross-checking strategies. The implications of these findings to nurse practitioners and publishers of nursing information are significant.

International Markedsføring på World Wide Web

DEFF Research Database (Denmark)

Rask, Morten; Buch, Niels Jakob

1999-01-01

Denne artikel tager udgangspunkt i en gruppe af danske virksomheders anvendelse af World Wide Web til international markedsføring i en periode fra 1996 til 1998. Der identificeres tre interaktionstyper for virksomhedernes profil på Web, nemlig Brochuren, Håndbogen og Handelspladsen. Der reflekteres...... over de krav de enkelte interaktionstyper i forhold til automatisering, formalisering, integration og evaluering kunne kræve. Konklusionen bliver, at de tre interaktionstyper afspejler de udfordringer og muligheder, der er i anvendelsen af Web til markedsføring primært i et internationalt perspektiv......, men kan også bruges som input til nationale Web markedsføringsaktiviteter....

Financial and Investment Sources on the Web.

Science.gov (United States)

Raeder, Aggi

1997-01-01

Discusses print and World Wide Web resources on personal finance, investments, and other business information and provides an annotated bibliography of investment and the stock market sites: meta sites, stock quotes, market news, data and analysis, brokerage firms, and sites for beginning investors. Includes addresses. (PEN)

Student participation in World Wide Web-based curriculum development of general chemistry

Science.gov (United States)

Hunter, William John Forbes

1998-12-01

This thesis describes an action research investigation of improvements to instruction in General Chemistry at Purdue University. Specifically, the study was conducted to guide continuous reform of curriculum materials delivered via the World Wide Web by involving students, instructors, and curriculum designers. The theoretical framework for this study was based upon constructivist learning theory and knowledge claims were developed using an inductive analysis procedure. This results of this study are assertions made in three domains: learning chemistry content via the World Wide Web, learning about learning via the World Wide Web, and learning about participation in an action research project. In the chemistry content domain, students were able to learn chemical concepts that utilized 3-dimensional visualizations, but not textual and graphical information delivered via the Web. In the learning via the Web domain, the use of feedback, the placement of supplementary aids, navigation, and the perception of conceptual novelty were all important to students' use of the Web. In the participation in action research domain, students learned about the complexity of curriculum. development, and valued their empowerment as part of the process.

Exploring Geology on the World-Wide Web--Volcanoes and Volcanism.

Science.gov (United States)

Schimmrich, Steven Henry; Gore, Pamela J. W.

1996-01-01

Focuses on sites on the World Wide Web that offer information about volcanoes. Web sites are classified into areas of Global Volcano Information, Volcanoes in Hawaii, Volcanoes in Alaska, Volcanoes in the Cascades, European and Icelandic Volcanoes, Extraterrestrial Volcanism, Volcanic Ash and Weather, and Volcano Resource Directories. Suggestions…

Collaborative Design of World Wide Web Pages: A Case Study.

Science.gov (United States)

Andrew, Paige G; Musser, Linda R.

1997-01-01

This case study of the collaborative design of an earth science World Wide Web page at Pennsylvania State University highlights the role of librarians. Discusses the original Web site and links, planning, the intended audience, and redesign and recommended changes; and considers the potential contributions of librarians. (LRW)

Role of Librarian in Internet and World Wide Web Environment

OpenAIRE

K. Nageswara Rao; KH Babu

2001-01-01

The transition of traditional library collections to digital or virtual collections presented the librarian with new opportunities. The Internet, Web en-vironment and associated sophisticated tools have given the librarian a new dynamic role to play and serve the new information based society in bet-ter ways than hitherto. Because of the powerful features of Web i.e. distributed, heterogeneous, collaborative, multimedia, multi-protocol, hyperme-dia-oriented architecture, World Wide Web has re...

Interactivity, Information Processing, and Learning on the World Wide Web.

Science.gov (United States)

Tremayne, Mark; Dunwoody, Sharon

2001-01-01

Examines the role of interactivity in the presentation of science news on the World Wide Web. Proposes and tests a model of interactive information processing that suggests that characteristics of users and Web sites influence interactivity, which influences knowledge acquisition. Describes use of a think-aloud method to study participants' mental…

Increasing efficiency of information dissemination and collection through the World Wide Web

Science.gov (United States)

Daniel P. Huebner; Malchus B. Baker; Peter F. Ffolliott

2000-01-01

Researchers, managers, and educators have access to revolutionary technology for information transfer through the World Wide Web (Web). Using the Web to effectively gather and distribute information is addressed in this paper. Tools, tips, and strategies are discussed. Companion Web sites are provided to guide users in selecting the most appropriate tool for searching...

Introduction to the World Wide Web and Mosaic

Science.gov (United States)

Youngblood, Jim

1994-01-01

This tutorial provides an introduction to some of the terminology related to the use of the World Wide Web and Mosaic. It is assumed that the user has some prior computer experience. References are included to other sources of additional information.

Grid-optimized Web 3D applications on wide area network

Science.gov (United States)

Wang, Frank; Helian, Na; Meng, Lingkui; Wu, Sining; Zhang, Wen; Guo, Yike; Parker, Michael Andrew

2008-08-01

Geographical information system has come into the Web Service times now. In this paper, Web3D applications have been developed based on our developed Gridjet platform, which provides a more effective solution for massive 3D geo-dataset sharing in distributed environments. Web3D services enabling web users could access the services as 3D scenes, virtual geographical environment and so on. However, Web3D services should be shared by thousands of essential users that inherently distributed on different geography locations. Large 3D geo-datasets need to be transferred to distributed clients via conventional HTTP, NFS and FTP protocols, which often encounters long waits and frustration in distributed wide area network environments. GridJet was used as the underlying engine between the Web 3D application node and geo-data server that utilizes a wide range of technologies including the one of paralleling the remote file access, which is a WAN/Grid-optimized protocol and provides "local-like" accesses to remote 3D geo-datasets. No change in the way of using software is required since the multi-streamed GridJet protocol remains fully compatible with existing IP infrastructures. Our recent progress includes a real-world test that Web3D applications as Google Earth over the GridJet protocol beats those over the classic ones by a factor of 2-7 where the transfer distance is over 10,000 km.

Service Learning and Building Community with the World Wide Web

Science.gov (United States)

Longan, Michael W.

2007-01-01

The geography education literature touts the World Wide Web (Web) as a revolutionary educational tool, yet most accounts ignore its uses for public communication and creative expression. This article argues that students can be producers of content that is of service to local audiences. Drawing inspiration from the community networking movement,…

Remote sensing education and Internet/World Wide Web technology

Science.gov (United States)

Griffith, J.A.; Egbert, S.L.

2001-01-01

Remote sensing education is increasingly in demand across academic and professional disciplines. Meanwhile, Internet technology and the World Wide Web (WWW) are being more frequently employed as teaching tools in remote sensing and other disciplines. The current wealth of information on the Internet and World Wide Web must be distilled, nonetheless, to be useful in remote sensing education. An extensive literature base is developing on the WWW as a tool in education and in teaching remote sensing. This literature reveals benefits and limitations of the WWW, and can guide its implementation. Among the most beneficial aspects of the Web are increased access to remote sensing expertise regardless of geographic location, increased access to current material, and access to extensive archives of satellite imagery and aerial photography. As with other teaching innovations, using the WWW/Internet may well mean more work, not less, for teachers, at least at the stage of early adoption. Also, information posted on Web sites is not always accurate. Development stages of this technology range from on-line posting of syllabi and lecture notes to on-line laboratory exercises and animated landscape flyovers and on-line image processing. The advantages of WWW/Internet technology may likely outweigh the costs of implementing it as a teaching tool.

Radiation protection and environmental radioactivity. A voyage to the World Wide Web for beginners; Strahlenschutz und Umweltradioaktivitaet im Internet. Eine Reise in das World Wide Web fuer Anfaenger

Energy Technology Data Exchange (ETDEWEB)

Weimer, S [Landesanstalt fuer Umweltschutz Baden-Wuerttemberg, Referat ' ' Umweltradioaktivitaet, Strahlenschutz' ' (Germany)

1998-07-01

According to the enormous growth of the Internet service 'World Wide Web' there is also a big growth in the number of web sites in connection with radiation protection. An introduction is given of some practical basis of the WWW. The structure of WWW addresses and navigating through the web with hyperlinks is explained. Further some search engines are presented. The paper lists a number of WWW addresses of interesting sites with radiological protection informations. (orig.) [German] Mit dem rasanten Wachstum des Internet-Dienstes 'World Wide Web' ist auch das Angebot von Web-Seiten im Bereich Strahlenschutz stark gewachsen. Es wird eine Einfuehrung in die wichtigsten praktischen Grundlagen des WWW gegeben. Es wird der Aufbau der WWW-Adressen erklaert und das Navigieren mit Hyperlinks. Ausserdem werden einige Suchmaschinen vorgestellt. Der Beitrag stellt eine groessere Zahl an WWW-Adressen zu interessanten Seiten mit Strahlenschutzinformationen zur Verfuegung. (orig.)

3-D Printed Fabry–Pérot Resonator Antenna with Paraboloid-Shape Superstrate for Wide Gain Bandwidth

Directory of Open Access Journals (Sweden)

Qiang Chen

2017-11-01

Full Text Available A three-dimensional (3-D printed Fabry–Pérot resonator antenna (FPRA, which designed with a paraboloid-shape superstrate for wide gain bandwidth is proposed. In comparison with the commonly-adopted planar superstrate, the paraboloid-shape superstrate is able to provide multiple resonant heights and thus satisfy the resonant condition of the FPRA in a wide frequency band. A FPRA working at 6 GHz is designed, fabricated, and tested. Considering the fabrication difficulty caused by its complex structure, the prototype antenna was fabricated by using the 3-D printing technology, i.e., all components of the prototype antenna were printed with photopolymer resin and then treated by the surface metallization process. Measurement results agree well with the simulation results, and show the 3-D printed FPRA has a |S11| < −10 dB impedance bandwidth of 12.4%, and a gain of 16.8 dBi at its working frequency of 6 GHz. Moreover, in comparison with the planar superstrate adopted in traditional FPRAs, the paraboloid-shape superstrate of the proposed FPRA significantly improves the 3-dB gain bandwidth from 6% to 22.2%.

World wide developments in shortwall and wide web mining techniques

Energy Technology Data Exchange (ETDEWEB)

Pollard, T

1975-11-01

The paper describes the progress to date with continuous pillar extraction, and how the typical longwall powered support has been modified to be both strong enough and stable enough to provide roof support for very wide webs. It also describes the operating systems which have been specially designed. The next stages of development are discussed, particularly the provision of continuous conveyor haulage in place of the present-day shuttle car. The author suggests that marrying American coal-getting technology and British roof support technology might increase productivity.

The world wide web: exploring a new advertising environment.

Science.gov (United States)

Johnson, C R; Neath, I

1999-01-01

The World Wide Web currently boasts millions of users in the United States alone and is likely to continue to expand both as a marketplace and as an advertising environment. Three experiments explored advertising in the Web environment, in particular memory for ads as they appear in everyday use across the Web. Experiments 1 and 2 examined the effect of advertising repetition on the retention of familiar and less familiar brand names, respectively. Experiment 1 demonstrated that repetition of a banner ad within multiple web pages can improve recall of familiar brand names, and Experiment 2 demonstrated that repetition can improve recognition of less familiar brand names. Experiment 3 directly compared the retention of familiar and less familiar brand names that were promoted by static and dynamic ads and demonstrated that the use of dynamic advertising can increase brand name recall, though only for familiar brand names. This study also demonstrated that, in the Web environment, much as in other advertising environments, familiar brand names possess a mnemonic advantage not possessed by less familiar brand names. Finally, data regarding Web usage gathered from all experiments confirm reports that Web usage among males tends to exceed that among females.

Information on infantile colic on the World Wide Web.

Science.gov (United States)

Bailey, Shana D; D'Auria, Jennifer P; Haushalter, Jamie P

2013-01-01

The purpose of this study was to explore and describe the type and quality of information on infantile colic that a parent might access on the World Wide Web. Two checklists were used to evaluate the quality indicators of 24 Web sites and the colic-specific content. Fifteen health information Web sites met more of the quality parameters than the nine commercial sites. Eight Web sites included information about colic and infant abuse, with six being health information sites. The colic-specific content on 24 Web sites reflected current issues and controversies; however, the completeness of the information in light of current evidence varied among the Web sites. Strategies to avoid complications of parental stress or infant abuse were not commonly found on the Web sites. Pediatric professionals must guide parents to reliable colic resources that also include emotional support and understanding of infant crying. A best evidence guideline for the United States would eliminate confusion and uncertainty about which colic therapies are safe and effective for parents and professionals. Copyright © 2013 National Association of Pediatric Nurse Practitioners. Published by Mosby, Inc. All rights reserved.

Medical mentoring via the evolving world wide web.

Science.gov (United States)

Jaffer, Usman; Vaughan-Huxley, Eyston; Standfield, Nigel; John, Nigel W

2013-01-01

Mentoring, for physicians and surgeons in training, is advocated as an essential adjunct in work-based learning, providing support in career and non-career related issues. The World Wide Web (WWW) has evolved, as a technology, to become more interactive and person centric, tailoring itself to the individual needs of the user. This changing technology may open new avenues to foster mentoring in medicine. DESIGN, SYSTEMATIC REVIEW, MAIN OUTCOME MEASURES: A search of the MEDLINE database from 1950 to 2012 using the PubMed interface, combined with manual cross-referencing was performed using the following strategy: ("mentors"[MeSH Terms] OR "mentors"[All Fields] OR "mentor"[All Fields]) AND ("internet"[MeSH Terms] OR "internet"[All Fields]) AND ("medicine"[MeSH Terms] OR "medicine"[All Fields]) AND ("humans"[MeSH Terms] AND English[lang]). Abstracts were screened for relevance (UJ) to the topic; eligibility for inclusion was simply on screening for relevance to online mentoring and web-based technologies. Forty-five papers were found, of which 16 were relevant. All studies were observational in nature. To date, all medical mentoring applications utilizing the World Wide Web have enjoyed some success limited by Web 1.0 and 2.0 technologies. With the evolution of the WWW through 1.0, 2.0 and 3.0 generations, the potential for meaningful tele- and distance mentoring has greatly improved. Some engagement has been made with these technological advancements, however further work is required to fully realize the potential of these technologies. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Integrating Mathematics, Science, and Language Arts Instruction Using the World Wide Web.

Science.gov (United States)

Clark, Kenneth; Hosticka, Alice; Kent, Judi; Browne, Ron

1998-01-01

Addresses issues of access to World Wide Web sites, mathematics and science content-resources available on the Web, and methods for integrating mathematics, science, and language arts instruction. (Author/ASK)

Basic support for cooperative work on the World Wide Web

NARCIS (Netherlands)

Bentley, R.; Appelt, W.; Busbach, U.; Hinrichs, E.; Kerr, D.; Sikkel, Nicolaas; Trevor, J.; Woetzel, G.

The emergence and widespread adoption of the World Wide Web offers a great deal of potential in supporting cross-platform cooperative work within widely dispersed working groups. The Basic Support for Cooperative Work (BSCW) project at GMD is attempting to realize this potential through development

CREATION OF A WEB MAP AND MOBILE APPLICATION BASED ON A PRINTED BOOK

Directory of Open Access Journals (Sweden)

V. Holubec

2016-06-01

Full Text Available The project describes a process of conversion of printed books into a web map and mobile application. The goal of the project is to make spatial data in the book accessible to wide public using GIS especially on web in order to spread the information about this topic. Moreover, as a result of the analysis and of the new perspectives gained from the data context, historians will be able to find new connections. The books that serve as sources of the project (two books with the scope of about 1400 pages featuring hundreds of locations where each location is associated with more events of different types refer to places with many addresses in Prague and some villages in the Czech Republic which are related to events that took place during the World War II. The paper describes the steps of conversion, the design of the data model in Esri geodatabase and examples of outputs. The historical data are connected to actual addresses and thanks to such a combination of historical and actual locations, the project will help to discover a part of the history of the Czech Republic and it will show new context in data via GIS capabilities. This project is a continuation of a project which recorded a march of death on a map. This is a unique project created in cooperation with Academia Publishing. The outputs of the project will serve as a core resource for a multimedia history portal. The author of the book is currently writing sequels from the post-war period and at least two other books are envisioned, so the future of the project is ensured.

Advanced use of World-Wide Web in the online system of DELPHI

International Nuclear Information System (INIS)

Doenszelmann, M.; Carvalho, D.; Du, S.; Tennebo, F.

1996-01-01

The World-Wide Web technologies used by the DELPHI experiment at CERN to provide easy access to information of the On-line System. WWW technology on both client and server side is used in five different projects. The World-Wide Web has its advantages concerning the network technology, the practical user interface and its scalability. It however also demands a stateless protocol and format negotiation. (author)

Meeting the challenge of finding resources for ophthalmic nurses on the World Wide Web.

Science.gov (United States)

Duffel, P G

1998-12-01

The World Wide Web ("the Web") is a macrocosm of resources that can be overwhelming. Often the sheer volume of material available causes one to give up in despair before finding information of any use. The Web is such a popular resource that it cannot be ignored. Two of the biggest challenges to finding good information on the Web are knowing where to start and judging whether the information gathered is pertinent and credible. This article addresses these two challenges and introduces the reader to a variety of ophthalmology and vision science resources on the World Wide Web.

How Commercial Banks Use the World Wide Web: A Content Analysis.

Science.gov (United States)

Leovic, Lydia K.

New telecommunications vehicles expand the possible ways that business is conducted. The hypermedia portion of the Internet, the World Wide Web, is such a telecommunications device. The Web is presently one of the most flexible and dynamic methods for electronic information dissemination. The level of technological sophistication necessary to…

Reading on the Computer Screen: Does Font Type Have Effects on Web Text Readability?

Science.gov (United States)

Ali, Ahmad Zamzuri Mohamad; Wahid, Rahani; Samsudin, Khairulanuar; Idris, Muhammad Zaffwan

2013-01-01

Reading on the World Wide Web has become a daily habit nowadays. This can be seen from the perspective of changes in readers' tendency to be more interested in materials from the internet, than printed media. Taking these developments into account, it is important for web-based instructional designers to choose the appropriate font, especially for…

Tim Berners-Lee: inventor de la World Wide Web

OpenAIRE

Universidad de Granada. Biblioteca

2015-01-01

El presente Cat??logo contiene la exposici??n organizada por la Biblioteca de la ETSIIT de la Universidad de Granada durante los meses de noviembre-diciembre de 2015 y titulada: "Tim Berners-Lee: inventor de la World Wide Web"

Consécration pour les Inventeurs du World-Wide Web

CERN Multimedia

CERN Press Office. Geneva

1996-01-01

Nearly seven years after it was invented at CERN, the World-Wide Web has woven its way into every corner of the Internet. On Saturday, 17 February, the inventors of the Web, Tim Berners-Lee, now at Massachusetts Institute of Technology (MIT), and Robert Cailliau of CERN's Electronics and Computing for Physics (ECP) Division, will be honoured with one of computing's highest distinctions: the Association for Computing (ACM) Software System Award 1995.

Fully inkjet printed wide band cantor fractal antenna for RF energy harvesting application

KAUST Repository

Bakytbekov, Azamat

2017-06-07

Energy harvesting from ambient RF signals is feasible, particularly from the GSM bands such as 900MHz, 1800MHz and the 3G band at 2.1GHz. This requires a wideband receive antenna which can cover all these bands with decent gain performance and an omnidirectional radiation pattern. In this work, a novel Cantor fractal antenna has been designed which fulfills the above mentioned performance requirements. Antenna has been realized through a combination of 3D inkjet printing of plastic substrate and 2D inkjet printing of metallic nanoparticles based ink. The stable impedance and radiation performance of the antenna over a bandwidth of 0.8GHz to 2.2GHz (93 %) shows the feasibility of its employment in wide band energy harvesting applications.

Educational use of World Wide Web pages on CD-ROM.

Science.gov (United States)

Engel, Thomas P; Smith, Michael

2002-01-01

The World Wide Web is increasingly important for medical education. Internet served pages may also be used on a local hard disk or CD-ROM without a network or server. This allows authors to reuse existing content and provide access to users without a network connection. CD-ROM offers several advantages over network delivery of Web pages for several applications. However, creating Web pages for CD-ROM requires careful planning. Issues include file names, relative links, directory names, default pages, server created content, image maps, other file types and embedded programming. With care, it is possible to create server based pages that can be copied directly to CD-ROM. In addition, Web pages on CD-ROM may reference Internet served pages to provide the best features of both methods.

WEB-DL endovascular treatment of wide-neck bifurcation aneurysms

DEFF Research Database (Denmark)

Lubicz, B; Klisch, J; Gauvrit, J-Y

2014-01-01

BACKGROUND AND PURPOSE: Flow disruption with the WEB-DL device has been used safely for the treatment of wide-neck bifurcation aneurysms, but the stability of aneurysm occlusion after this treatment is unknown. This retrospective multicenter European study analyzed short- and midterm data...... in patients treated with WEB-DL. MATERIALS AND METHODS: Twelve European neurointerventional centers participated in the study. Clinical data and pre- and postoperative short- and midterm images were collected. An experienced interventional neuroradiologist independently analyzed the images. Aneurysm occlusion...... was classified into 4 grades: complete occlusion, opacification of the proximal recess of the device, neck remnant, and aneurysm remnant. RESULTS: Forty-five patients (34 women and 11 men) 35-74 years of age (mean, 56.3 ± 9.6 years) with 45 aneurysms treated with the WEB device were included. Aneurysm locations...

Role of Librarian in Internet and World Wide Web Environment

Directory of Open Access Journals (Sweden)

K. Nageswara Rao

2001-01-01

Full Text Available The transition of traditional library collections to digital or virtual collections presented the librarian with new opportunities. The Internet, Web en-vironment and associated sophisticated tools have given the librarian a new dynamic role to play and serve the new information based society in bet-ter ways than hitherto. Because of the powerful features of Web i.e. distributed, heterogeneous, collaborative, multimedia, multi-protocol, hyperme-dia-oriented architecture, World Wide Web has revolutionized the way people access information, and has opened up new possibilities in areas such as digital libraries, virtual libraries, scientific information retrieval and dissemination. Not only the world is becoming interconnected, but also the use of Internet and Web has changed the fundamental roles, paradigms, and organizational culture of libraries and librarians as well. The article describes the limitless scope of Internet and Web, the existence of the librarian in the changing environment, parallelism between information sci-ence and information technology, librarians and intelligent agents, working of intelligent agents, strengths, weaknesses, threats and opportunities in-volved in the relationship between librarians and the Web. The role of librarian in Internet and Web environment especially as intermediary, facilita-tor, end-user trainer, Web site builder, researcher, interface designer, knowledge manager and sifter of information resources is also described.

Multi-dimensional effects of color on the world wide web

Science.gov (United States)

Morton, Jill

2002-06-01

Color is the most powerful building material of visual imagery on the World Wide Web. It must function successfully as it has done historically in traditional two-dimensional media, as well as address new challenges presented by this electronic medium. The psychological, physiological, technical and aesthetic effects of color have been redefined by the unique requirements of the electronic transmission of text and images on the Web. Color simultaneously addresses each of these dimensions in this electronic medium.

The Web as a Reference Tool: Comparisons with Traditional Sources.

Science.gov (United States)

Janes, Joseph; McClure, Charles R.

1999-01-01

This preliminary study suggests that the same level of timeliness and accuracy can be obtained for answers to reference questions using resources in freely available World Wide Web sites as with traditional print-based resources. Discusses implications for library collection development, new models of consortia, training needs, and costing and…

Usare WebDewey

OpenAIRE

Baldi, Paolo

2016-01-01

This presentation shows how to use the WebDewey tool. Features of WebDewey. Italian WebDewey compared with American WebDewey. Querying Italian WebDewey. Italian WebDewey and MARC21. Italian WebDewey and UNIMARC. Numbers, captions, "equivalente verbale": Dewey decimal classification in Italian catalogues. Italian WebDewey and Nuovo soggettario. Italian WebDewey and LCSH. Italian WebDewey compared with printed version of Italian Dewey Classification (22. edition): advantages and disadvantages o...

Accessing NASA Technology with the World Wide Web

Science.gov (United States)

Nelson, Michael L.; Bianco, David J.

1995-01-01

NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer and technology awareness applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology OPportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. The NASA Technical Report Server (NTRS) provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people.

PENYEBARAN INFORMASI MENGGUNAKAN WWW (WORLD WIDE WEB

Directory of Open Access Journals (Sweden)

Ika Atman Satya

2011-12-01

Full Text Available Media Informasi secara tradisional telah kita kenai dengan menggunakan koran, televisi, radio dan buku referensi. Media informasi tersebut untuk penyebarannya memerlukan penunjang agar informasi tersebut dapat disebarkan secara lutis. Selain penggunaan media tradisional tersebut penyebaran informasi dengan menggunakan jaringan komputer Internet juga berkembang. Salah satu cara penyebaran informasi dengan menggunakan aplikasi WWW (World Wide Web yang mempunyai kemampuan menggabungkan gambar, text dan suara secara interaktif. Pada tulisan ini akan dibahas tentang kemampuan, penggunaan dan pengembangan server WWW.

Finding Web-Based Anxiety Interventions on the World Wide Web: A Scoping Review.

Science.gov (United States)

Ashford, Miriam Thiel; Olander, Ellinor K; Ayers, Susan

2016-06-01

One relatively new and increasingly popular approach of increasing access to treatment is Web-based intervention programs. The advantage of Web-based approaches is the accessibility, affordability, and anonymity of potentially evidence-based treatment. Despite much research evidence on the effectiveness of Web-based interventions for anxiety found in the literature, little is known about what is publically available for potential consumers on the Web. Our aim was to explore what a consumer searching the Web for Web-based intervention options for anxiety-related issues might find. The objectives were to identify currently publically available Web-based intervention programs for anxiety and to synthesize and review these in terms of (1) website characteristics such as credibility and accessibility; (2) intervention program characteristics such as intervention focus, design, and presentation modes; (3) therapeutic elements employed; and (4) published evidence of efficacy. Web keyword searches were carried out on three major search engines (Google, Bing, and Yahoo-UK platforms). For each search, the first 25 hyperlinks were screened for eligible programs. Included were programs that were designed for anxiety symptoms, currently publically accessible on the Web, had an online component, a structured treatment plan, and were available in English. Data were extracted for website characteristics, program characteristics, therapeutic characteristics, as well as empirical evidence. Programs were also evaluated using a 16-point rating tool. The search resulted in 34 programs that were eligible for review. A wide variety of programs for anxiety, including specific anxiety disorders, and anxiety in combination with stress, depression, or anger were identified and based predominantly on cognitive behavioral therapy techniques. The majority of websites were rated as credible, secure, and free of advertisement. The majority required users to register and/or to pay a program access

White Supremacists, Oppositional Culture and the World Wide Web

Science.gov (United States)

Adams, Josh; Roscigno, Vincent J.

2005-01-01

Over the previous decade, white supremacist organizations have tapped into the ever emerging possibilities offered by the World Wide Web. Drawing from prior sociological work that has examined this medium and its uses by white supremacist organizations, this article advances the understanding of recruitment, identity and action by providing a…

Growth and structure of the World Wide Web: Towards realistic modeling

Science.gov (United States)

Tadić, Bosiljka

2002-08-01

We simulate evolution of the World Wide Web from the dynamic rules incorporating growth, bias attachment, and rewiring. We show that the emergent double-hierarchical structure with distinct distributions of out- and in-links is comparable with the observed empirical data when the control parameter (average graph flexibility β) is kept in the range β=3-4. We then explore the Web graph by simulating (a) Web crawling to determine size and depth of connected components, and (b) a random walker that discovers the structure of connected subgraphs with dominant attractor and promoter nodes. A random walker that adapts its move strategy to mimic local node linking preferences is shown to have a short access time to "important" nodes on the Web graph.

Touring the Campus Library from the World Wide Web.

Science.gov (United States)

Mosley, Pixey Anne; Xiao, Daniel

1996-01-01

The philosophy, design, implementation and evaluation of a World Wide Web-accessible Virtual Library Tour of Texas A & M University's Evans Library is presented. Its design combined technical computer issues and library instruction expertise. The tour can be used to simulate a typical walking tour through the library or heading directly to a…

Wide frequency independently controlled dual-band inkjet-printed antenna

KAUST Repository

AbuTarboush, Hattan F.

2014-01-08

A low-cost inkjet-printed multiband monopole antenna is presented. The unique advantage of the proposed antenna is the freedom to adjust and set the dual-band of the antenna independently over a wide range (148.83%). To demonstrate the independent control feature, the 2.4 and 3.4 GHz bands for the wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications are selected as an example. The measured impedance bandwidths for the 2.4 and 3.4 GHz are 15.2 and 23.7%, respectively. These dual-bands have the ability to be controlled independently between 1.1 and 7.5 GHz without affecting the other band. In addition, the proposed antenna can be assigned for different mobile and wireless applications such as GPS, PCS, GSM 1800, 1900, UMTS, and up to 5-GHz WLAN and WiMAX applications. The mechanism of independent control of each radiator through dimensional variation is discussed in detail. The antenna has a compact size of 10 × 37.3 × 0.44 mm3, leaving enough space for the driving electronics on the paper substrate. The measured results from the prototype are in good agreement with the simulated results. Owing to inkjet printing on an ordinary paper, the design is extremely light weight and highly suitable for low cost and large volume manufacturing. © The Institution of Engineering and Technology 2013.

Distributing Congestion Management System Information Using the World Wide Web

Science.gov (United States)

1997-01-01

The Internet is a unique medium for the distribution of information, and it provides a tremendous opportunity to take advantage of peoples innate interest in transportation issues as they relate to their own lives. In particular, the World Wide Web (...

Print Quality of Ink Jet Printed PVC Foils

Directory of Open Access Journals (Sweden)

Nemanja Kašiković

2015-09-01

Full Text Available Digital printing technique is used for a wide variety of substrates, one of which are PVC foils. Samples used in this research were printed by digital ink jet printing technique using Mimaki JV22 printing machine and J-Eco Subly Nano inks. As printing substrates, two different types of materials were used (ORACAL 640 - Print Vinyl and LG Hausys LP2712. A test card consisting of fields of CMYK colours was created and printed, varying the number of ink layers applied. Samples were exposed to light after the printing process. Spectrophotometric measurements were conducted before and after the light treatment. Based on spectrophotometricaly obtained data, colour differences ΔE2000 were calculated. Results showed that increasing number of layers, as well as the right choice of substrates, can improve the behaviour of printed product during exploitation.

The World-Wide Web past present and future, and its application to medicine

CERN Document Server

Sendall, D M

1997-01-01

The World-Wide Web was first developed as a tool for collaboration in the high energy physics community. From there it spread rapidly to other fields, and grew to its present impressive size. As an easy way to access information, it has been a great success, and a huge number of medical applications have taken advantage of it. But there is another side to the Web, its potential as a tool for collaboration between people. Medical examples include telemedicine and teaching. New technical developments offer still greater potential in medical and other fields. This paper gives some background to the early development of the World-Wide Web, a brief overview of its present state with some examples relevant to medicine, and a look at the future.

Wikinews interviews World Wide Web co-inventor Robert Cailliau

CERN Multimedia

2007-01-01

"The name Robert Caillau may not ring a bell to the general pbulic, but his invention is the reason why you are reading this: Dr. Cailliau together with his colleague Sir Tim Berners-Lee invented the World Wide Web, making the internet accessible so it could grow from an academic tool to a mass communication medium." (9 pages)

Collaborative Information Agents on the World Wide Web

Science.gov (United States)

Chen, James R.; Mathe, Nathalie; Wolfe, Shawn; Koga, Dennis J. (Technical Monitor)

1998-01-01

In this paper, we present DIAMS, a system of distributed, collaborative information agents which help users access, collect, organize, and exchange information on the World Wide Web. Personal agents provide their owners dynamic displays of well organized information collections, as well as friendly information management utilities. Personal agents exchange information with one another. They also work with other types of information agents such as matchmakers and knowledge experts to facilitate collaboration and communication.

The Land of Confusion? High School Students and Their Use of the World Wide Web for Research.

Science.gov (United States)

Lorenzen, Michael

2002-01-01

Examines high school students' use of the World Wide Web to complete assignments. Findings showed the students used a good variety of resources, including libraries and the World Wide Web, to find information for assignments. However, students were weak at determining the quality of the information found on web sites. Students did poorly at…

Wood Utilization Research Dissemination on the World Wide Web: A Case Study

Science.gov (United States)

Daniel L. Schmoldt; Matthew F. Winn; Philip A. Araman

1997-01-01

Because many research products are informational rather than tangible, emerging information technologies, such as the multi-media format of the World Wide Web, provide an open and easily accessible mechanism for transferring research to user groups. We have found steady, increasing use of our Web site over the first 6-1/2 months of operation; almost one-third of the...

Statistical Analysis with Webstat, a Java applet for the World Wide Web

Directory of Open Access Journals (Sweden)

Webster West

1997-09-01

Full Text Available The Java programming language has added a new tool for delivering computing applications over the World Wide Web (WWW. WebStat is a new computing environment for basic statistical analysis which is delivered in the form of a Java applet. Anyone with WWW access and a Java capable browser can access this new analysis environment. Along with an overall introduction of the environment, the main features of this package are illustrated, and the prospect of using basic WebStat components for more advanced applications is discussed.

Histology on the World Wide Web: A Digest of Resources for Students and Teachers.

Science.gov (United States)

Cotter, John R.

1997-01-01

Provides a list of 37 World Wide Web sites that are devoted to instruction in histology and include electronic manuals, syllabi, atlases, image galleries, and quizzes. Reviews the topics, content, and highlights of these Web sites. (DDR)

The online discourse on the Demjanjuk trial. New memory practices on the World Wide Web?

Directory of Open Access Journals (Sweden)

Vivien SOMMER

2012-01-01

Full Text Available In this article I want to discuss the question if and how the World Wide Web changes social memory practices. Therefore I examine the relationship between the World Wide Web, social memory practices and public discourses. Towards discussing mediated memory processes I focus on the online discourse about the trial against the former concentration camp guard John Demjanjuk.

Worldwide Research, Worldwide Participation: Web-Based Test Logger

Science.gov (United States)

Clark, David A.

1998-01-01

Thanks to the World Wide Web, a new paradigm has been born. ESCORT (steady state data system) facilities can now be configured to use a Web-based test logger, enabling worldwide participation in tests. NASA Lewis Research Center's new Web-based test logger for ESCORT automatically writes selected test and facility parameters to a browser and allows researchers to insert comments. All data can be viewed in real time via Internet connections, so anyone with a Web browser and the correct URL (universal resource locator, or Web address) can interactively participate. As the test proceeds and ESCORT data are taken, Web browsers connected to the logger are updated automatically. The use of this logger has demonstrated several benefits. First, researchers are free from manual data entry and are able to focus more on the tests. Second, research logs can be printed in report format immediately after (or during) a test. And finally, all test information is readily available to an international public.

Infant Gastroesophageal Reflux Information on the World Wide Web.

Science.gov (United States)

Balgowan, Regina; Greer, Leah C; D'Auria, Jennifer P

2016-01-01

The purpose of this study was to describe the type and quality of health information about infant gastroesophageal reflux (GER) that a parent may find on the World Wide Web. The data collection tool included evaluation of Web site quality and infant GER-specific content on the 30 sites that met the inclusion criteria. The most commonly found content categories in order of frequency were management strategies, when to call a primary care provider, definition, and clinical features. The most frequently mentioned strategies included feeding changes, infant positioning, and medications. Thirteen of the 30 Web sites included information on both GER and gastroesophageal reflux disease. Mention of the use of medication to lessen infant symptoms was found on 15 of the 30 sites. Only 10 of the 30 sites included information about parent support and coping strategies. Pediatric nurse practitioners (PNPs) should utilize well-child visits to address the normalcy of physiologic infant GER and clarify any misperceptions parents may have about diagnosis and the role of medication from information they may have found on the Internet. It is critical for PNPs to assist in the development of Web sites with accurate content, advise parents on how to identify safe and reliable information, and provide examples of high-quality Web sites about child health topics such as infant GER. Copyright © 2016 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

Effects of Surrounding Information and Line Length on Text Comprehension from the Web

Directory of Open Access Journals (Sweden)

Jess McMullin

2002-02-01

Full Text Available The World Wide Web (Web is becoming a popular medium for transmission of information and online learning. We need to understand how people comprehend information from the Web to design Web sites that maximize the acquisition of information. We examined two features of Web page design that are easily modified by developers, namely line length and the amount of surrounding information, or whitespace. Undergraduate university student participants read text and answered comprehension questions on the Web. Comprehension was affected by whitespace; participants had better comprehension for information surrounded by whitespace than for information surrounded by meaningless information. Participants were not affected by line length. These findings demonstrate that reading from the Web is not the same as reading print and have implications for instructional Web design.

Increasing public understanding of transgenic crops through the World Wide Web.

Science.gov (United States)

Byrne, Patrick F; Namuth, Deana M; Harrington, Judy; Ward, Sarah M; Lee, Donald J; Hain, Patricia

2002-07-01

Transgenic crops among the most controversial "science and society" issues of recent years. Because of the complex techniques involved in creating these crops and the polarized debate over their risks and beliefs, a critical need has arisen for accessible and balanced information on this technology. World Wide Web sites offer several advantages for disseminating information on a fast-changing technical topic, including their global accessibility; and their ability to update information frequently, incorporate multimedia formats, and link to networks of other sites. An alliance between two complementary web sites at Colorado State University and the University of Nebraska-Lincoln takes advantage of the web environment to help fill the need for public information on crop genetic engineering. This article describes the objectives and features of each site. Viewership data and other feedback have shown these web sites to be effective means of reaching public audiences on a complex scientific topic.

The Relationship of the World Wide Web to Thinking Skills.

Science.gov (United States)

Bradshaw, Amy C.; Bishop, Jeanne L.; Gens, Linda S.; Miller, Sharla L.; Rogers, Martha A.

2002-01-01

Discusses use of the World Wide Web in education and its possibilities for developing higher order critical thinking skills to successfully deal with the demands of the future information society. Suggests that teachers need to provide learning environments that are learner-centered, authentic, problem-based, and collaborative. (Contains 61…

Exploratory Analysis of the Effect of Consultants on the Use of World Wide Web Sites in SMEs

Directory of Open Access Journals (Sweden)

Sigi Goode

2002-11-01

Full Text Available There is little published research on the role of consultants in technology adoption. Given the increasing popularity of the World Wide Web in commercial environments and the number of consultants now offering web development services, some analysis into the effects of their engagement would be of benefit. In an extension of an ongoing study, an existing sample of 113 World Wide Web adopters was used to examine the nature of World Wide Web site use with respect to consultant and Internet Service Provider (ISP engagement. Analysis was also conducted into the use of consultants and ISPs as developers and maintainers of these sites. This preliminary research finds a number of interesting outcomes. No significant relationship is found between consultant or ISP engagement and World Wide Web site use, regardless of whether the consultant was engaged as site developer or site maintainer. The study raises a number of additional findings that are of interest but are not directly related to this study. These findings merit further research.

Web-based magazine design for self publishers

Science.gov (United States)

Hunter, Andrew; Slatter, David; Greig, Darryl

2011-03-01

Short run printing technology and web services such as MagCloud provide new opportunities for long-tail magazine publishing. They enable self publishers to supply magazines to a wide range of communities, including groups that are too small to be viable as target communities for conventional publishers. In a Web 2.0 world where users constantly discover new services and where they may be infrequent patrons of any single service, it is unreasonable to expect users to learn the complex service behaviors. Furthermore, we want to open up publishing opportunities to novices who are unlikely to have prior experience of publishing and who lack design expertise. Magazine design automation is an ambitious goal, but recent progress with another web service, Autophotobook, proves that some level of automation of publication design is feasible. This paper describes our current research effort to extend the automation capabilities of Autophotobook to address the issues of magazine design so that we can provide a service to support professional-quality self publishing by novice users for a wide range of community types and sizes.

El creador de World Wide Web gana premio Millennium de tecnologia

CERN Multimedia

Galan, J

2004-01-01

"El creador de la World Wide Web (WWW), el fisico britanico Tim Berners-Lee, gano hoy la primera edicion del Millennium Technology Prize, un galardon internacional creado por una fundacion finlandesa y dotado con un millon de euros" (1/2 page)

Remote monitoring using technologies from the Internet and World Wide Web

International Nuclear Information System (INIS)

Puckett, J.M.; Burczyk, L.

1997-01-01

Recent developments in Internet technologies are changing and enhancing how one processes and exchanges information. These developments include software and hardware in support of multimedia applications on the World Wide Web. In this paper the authors describe these technologies as they have applied them to remote monitoring and show how they will allow the International Atomic Energy Agency to efficiently review and analyze remote monitoring data for verification of material movements. The authors have developed demonstration software that illustrates several safeguards data systems using the resources of the Internet and Web to access and review data. This Web demo allows the user to directly observe sensor data, to analyze simulated safeguards data, and to view simulated on-line inventory data. Future activities include addressing the technical and security issues associated with using the Web to interface with existing and planned monitoring systems at nuclear facilities. Some of these issues are authentication, encryption, transmission of large quantities of data, and data compression

Health information seeking and the World Wide Web: an uncertainty management perspective.

Science.gov (United States)

Rains, Stephen A

2014-01-01

Uncertainty management theory was applied in the present study to offer one theoretical explanation for how individuals use the World Wide Web to acquire health information and to help better understand the implications of the Web for information seeking. The diversity of information sources available on the Web and potential to exert some control over the depth and breadth of one's information-acquisition effort is argued to facilitate uncertainty management. A total of 538 respondents completed a questionnaire about their uncertainty related to cancer prevention and information-seeking behavior. Consistent with study predictions, use of the Web for information seeking interacted with respondents' desired level of uncertainty to predict their actual level of uncertainty about cancer prevention. The results offer evidence that respondents who used the Web to search for cancer information were better able than were respondents who did not seek information to achieve a level of uncertainty commensurate with the level of uncertainty they desired.

The poor quality of information about laparoscopy on the World Wide Web as indexed by popular search engines.

Science.gov (United States)

Allen, J W; Finch, R J; Coleman, M G; Nathanson, L K; O'Rourke, N A; Fielding, G A

2002-01-01

This study was undertaken to determine the quality of information on the Internet regarding laparoscopy. Four popular World Wide Web search engines were used with the key word "laparoscopy." Advertisements, patient- or physician-directed information, and controversial material were noted. A total of 14,030 Web pages were found, but only 104 were unique Web sites. The majority of the sites were duplicate pages, subpages within a main Web page, or dead links. Twenty-eight of the 104 pages had a medical product for sale, 26 were patient-directed, 23 were written by a physician or group of physicians, and six represented corporations. The remaining 21 were "miscellaneous." The 46 pages containing educational material were critically reviewed. At least one of the senior authors found that 32 of the pages contained controversial or misleading statements. All of the three senior authors (LKN, NAO, GAF) independently agreed that 17 of the 46 pages contained controversial information. The World Wide Web is not a reliable source for patient or physician information about laparoscopy. Authenticating medical information on the World Wide Web is a difficult task, and no government or surgical society has taken the lead in regulating what is presented as fact on the World Wide Web.

World Wide Web Homepages: An Examination of Content and Audience.

Science.gov (United States)

Reynolds, Betty; And Others

This paper shows how the content of a World Wide Web page is selected and how an examination of the intended audience influences content. Examples from the New Mexico Tech (NMT) Library homepage show what sources are selected and what level of detail is appropriate for the intended audience. Six fundamental functions of libraries and information…

Contemporary Approaches to Critical Thinking and the World Wide Web

Science.gov (United States)

Buffington, Melanie L.

2007-01-01

Teaching critical thinking skills is often endorsed as a means to help students develop their abilities to navigate the complex world in which people live and, in addition, as a way to help students succeed in school. Over the past few years, this author explored the idea of teaching critical thinking using the World Wide Web (WWW). She began…

Marketing and Selling CD-ROM Products on the World-Wide Web.

Science.gov (United States)

Walker, Becki

1995-01-01

Describes three companies' approaches to marketing and selling CD-ROM products on the World Wide Web. Benefits include low overhead for Internet-based sales, allowance for creativity, and ability to let customers preview products online. Discusses advertising, information delivery, content, information services, and security. (AEF)

Radiation protection and environmental radioactivity. A voyage to the World Wide Web for beginners

International Nuclear Information System (INIS)

Weimer, S.

1998-01-01

According to the enormous growth of the Internet service 'World Wide Web' there is also a big growth in the number of web sites in connection with radiation protection. An introduction is given of some practical basis of the WWW. The structure of WWW addresses and navigating through the web with hyperlinks is explained. Further some search engines are presented. The paper lists a number of WWW addresses of interesting sites with radiological protection informations. (orig.) [de

Building a print on demand web service

Science.gov (United States)

Reddy, Prakash; Rozario, Benedict; Dudekula, Shariff; V, Anil Dev

2011-03-01

There is considerable effort underway to digitize all books that have ever been printed. There is need for a service that can take raw book scans and convert them into Print on Demand (POD) books. Such a service definitely augments the digitization effort and enables broader access to a wider audience. To make this service practical we have identified three key challenges that needed to be addressed. These are: a) produce high quality image images by eliminating artifacts that exist due to the age of the document or those that are introduced during the scanning process b) develop an efficient automated system to process book scans with minimum human intervention; and c) build an eco system which allows us the target audience to discover these books.

Quality analysis of patient information about knee arthroscopy on the World Wide Web.

Science.gov (United States)

Sambandam, Senthil Nathan; Ramasamy, Vijayaraj; Priyanka, Priyanka; Ilango, Balakrishnan

2007-05-01

This study was designed to ascertain the quality of patient information available on the World Wide Web on the topic of knee arthroscopy. For the purpose of quality analysis, we used a pool of 232 search results obtained from 7 different search engines. We used a modified assessment questionnaire to assess the quality of these Web sites. This questionnaire was developed based on similar studies evaluating Web site quality and includes items on illustrations, accessibility, availability, accountability, and content of the Web site. We also compared results obtained with different search engines and tried to establish the best possible search strategy to attain the most relevant, authentic, and adequate information with minimum time consumption. For this purpose, we first compared 100 search results from the single most commonly used search engine (AltaVista) with the pooled sample containing 20 search results from each of the 7 different search engines. The search engines used were metasearch (Copernic and Mamma), general search (Google, AltaVista, and Yahoo), and health topic-related search engines (MedHunt and Healthfinder). The phrase "knee arthroscopy" was used as the search terminology. Excluding the repetitions, there were 117 Web sites available for quality analysis. These sites were analyzed for accessibility, relevance, authenticity, adequacy, and accountability by use of a specially designed questionnaire. Our analysis showed that most of the sites providing patient information on knee arthroscopy contained outdated information, were inadequate, and were not accountable. Only 16 sites were found to be providing reasonably good patient information and hence can be recommended to patients. Understandably, most of these sites were from nonprofit organizations and educational institutions. Furthermore, our study revealed that using multiple search engines increases patients' chances of obtaining more relevant information rather than using a single search

Web-Based Surveys: Not Your Basic Survey Anymore

Science.gov (United States)

Bertot, John Carlo

2009-01-01

Web-based surveys are not new to the library environment. Although such surveys began as extensions of print surveys, the Web-based environment offers a number of approaches to conducting a survey that the print environment cannot duplicate easily. Since 1994, the author and others have conducted national surveys of public library Internet…

Tesauros e a World Wide Web

OpenAIRE

Murakami, Tiago R. M.

2005-01-01

Thesauri are tools that growing importance in Web context. For this, is necessary adapting the thesauri for Web technologies and functionalities. The present work is an exploratory study that aim identifies how the documentary thesauri are being utilized and/or incorporated for the management of information in the Web.

World-Wide Web Tools for Locating Planetary Images

Science.gov (United States)

Kanefsky, Bob; Deiss, Ron (Technical Monitor)

1995-01-01

The explosive growth of the World-Wide Web (WWW) in the past year has made it feasible to provide interactive graphical tools to assist scientists in locating planetary images. The highest available resolution images of any site of interest can be quickly found on a map or plot, and, if online, displayed immediately on nearly any computer equipped with a color screen, an Internet connection, and any of the free WWW browsers. The same tools may also be of interest to educators, students, and the general public. Image finding tools have been implemented covering most of the solar system: Earth, Mars, and the moons and planets imaged by Voyager. The Mars image-finder, which plots the footprints of all the high-resolution Viking Orbiter images and can be used to display any that are available online, also contains a complete scrollable atlas and hypertext gazetteer to help locating areas. The Earth image-finder is linked to thousands of Shuttle images stored at NASA/JSC, and displays them as red dots on a globe. The Voyager image-finder plots images as dots, by longitude and apparent target size, linked to online images. The locator (URL) for the top-level page is http: //ic-www.arc.nasa.gov/ic/projects/bayes-group/Atlas/. Through the efforts of the Planetary Data System and other organizations, hundreds of thousands of planetary images are now available on CD-ROM, and many of these have been made available on the WWW. However, locating images of a desired site is still problematic, in practice. For example, many scientists studying Mars use digital image maps, which are one third the resolution of Viking Orbiter survey images. When they douse Viking Orbiter images, they often work with photographically printed hardcopies, which lack the flexibility of digital images: magnification, contrast stretching, and other basic image-processing techniques offered by off-the-shelf software. From the perspective of someone working on an experimental image processing technique for

Radar Images of the Earth and the World Wide Web

Science.gov (United States)

Chapman, B.; Freeman, A.

1995-01-01

A perspective of NASA's Jet Propulsion Laboratory as a center of planetary exploration, and its involvement in studying the earth from space is given. Remote sensing, radar maps, land topography, snow cover properties, vegetation type, biomass content, moisture levels, and ocean data are items discussed related to earth orbiting satellite imaging radar. World Wide Web viewing of this content is discussed.

The development of a web- and a print-based decision aid for prostate cancer screening

Directory of Open Access Journals (Sweden)

Schwartz Marc D

2010-03-01

Full Text Available Abstract Background Whether early detection and treatment of prostate cancer (PCa will reduce disease-related mortality remains uncertain. As a result, tools are needed to facilitate informed decision making. While there have been several decision aids (DAs developed and tested, very few have included an exercise to help men clarify their values and preferences about PCa screening. Further, only one DA has utilized an interactive web-based format, which allows for an expansion and customization of the material. We describe the development of two DAs, a booklet and an interactive website, each with a values clarification component and designed for use in diverse settings. Methods We conducted two feasibility studies to assess men's (45-70 years Internet access and their willingness to use a web- vs. a print-based tool. The booklet was adapted from two previous versions evaluated in randomized controlled trials (RCTs and the website was created to closely match the content of the revised booklet. Usability testing was conducted to obtain feedback regarding draft versions of the materials. The tools were also reviewed by a plain language expert and the interdisciplinary research team. Feedback on the content and presentation led to iterative modifications of the tools. Results The feasibility studies confirmed that the Internet was a viable medium, as the majority of men used a computer, had access to the Internet, and Internet use increased over time. Feedback from the usability testing on the length, presentation, and content of the materials was incorporated into the final versions of the booklet and website. Both the feasibility studies and the usability testing highlighted the need to address men's informed decision making regarding screening. Conclusions Informed decision making for PCa screening is crucial at present and may be important for some time, particularly if a definitive recommendation either for or against screening does not

Documenting historical data and accessing it on the World Wide Web

Science.gov (United States)

Malchus B. Baker; Daniel P. Huebner; Peter F. Ffolliott

2000-01-01

New computer technologies facilitate the storage, retrieval, and summarization of watershed-based data sets on the World Wide Web. These data sets are used by researchers when testing and validating predictive models, managers when planning and implementing watershed management practices, educators when learning about hydrologic processes, and decisionmakers when...

Wired World-Wide Web Interactive Remote Event Display

Energy Technology Data Exchange (ETDEWEB)

De Groot, Nicolo

2003-05-07

WIRED (World-Wide Web Interactive Remote Event Display) is a framework, written in the Java{trademark} language, for building High Energy Physics event displays. An event display based on the WIRED framework enables users of a HEP collaboration to visualize and analyze events remotely using ordinary WWW browsers, on any type of machine. In addition, event displays using WIRED may provide the general public with access to the research of high energy physics. The recent introduction of the object-oriented Java{trademark} language enables the transfer of machine independent code across the Internet, to be safely executed by a Java enhanced WWW browser. We have employed this technology to create a remote event display in WWW. The combined Java-WWW technology hence assures a world wide availability of such an event display, an always up-to-date program and a platform independent implementation, which is easy to use and to install.

Outreach to International Students and Scholars Using the World Wide Web.

Science.gov (United States)

Wei, Wei

1998-01-01

Describes the creation of a World Wide Web site for the Science Library International Outreach Program at the University of California, Santa Cruz. Discusses design elements, content, and promotion of the site. Copies of the home page and the page containing the outreach program's statement of purpose are included. (AEF)

Alaskan Auroral All-Sky Images on the World Wide Web

Science.gov (United States)

Stenbaek-Nielsen, H. C.

1997-01-01

In response to a 1995 NASA SPDS announcement of support for preservation and distribution of important data sets online, the Geophysical Institute, University of Alaska Fairbanks, Alaska, proposed to provide World Wide Web access to the Poker Flat Auroral All-sky Camera images in real time. The Poker auroral all-sky camera is located in the Davis Science Operation Center at Poker Flat Rocket Range about 30 miles north-east of Fairbanks, Alaska, and is connected, through a microwave link, with the Geophysical Institute where we maintain the data base linked to the Web. To protect the low light-level all-sky TV camera from damage due to excessive light, we only operate during the winter season when the moon is down. The camera and data acquisition is now fully computer controlled. Digital images are transmitted each minute to the Web linked data base where the data are available in a number of different presentations: (1) Individual JPEG compressed images (1 minute resolution); (2) Time lapse MPEG movie of the stored images; and (3) A meridional plot of the entire night activity.

Where to find nutritional science journals on the World Wide Web.

Science.gov (United States)

Brown, C M

1997-08-01

The World Wide Web (WWW) is a burgeoning information resource that can be utilized for current awareness and assistance in manuscript preparation and submission. The ever changing and expanding nature of the WWW allows it to provide up to the minute information, but this inherent changeability often makes information access difficult. To assist nutrition scientists in locating useful information about nutritional science journals on the WWW, this article critically reviews and describes the WWW sites for seventeen highly ranked nutrition and dietetics journals. Included in each annotation are the site's title, web address or Universal Resource Locator (URL), journal ranking and site authorship. Also listed is whether or not the site makes available the guidelines for authors, tables of contents, abstracts, online ordering, as well as information about the editorial board. This critical survey illustrates that the information on the web, regardless of its authority, is not of equal quality.

A Vector Printing Method for High-Speed Electrohydrodynamic (EHD Jet Printing Based on Encoder Position Sensors

Directory of Open Access Journals (Sweden)

Thanh Huy Phung

2018-02-01

Full Text Available Electrohyrodynamic (EHD jet printing has been widely used in the field of direct micro-nano patterning applications, due to its high resolution printing capability. So far, vector line printing using a single nozzle has been widely used for most EHD printing applications. However, the application has been limited to low-speed printing, to avoid non-uniform line width near the end points where line printing starts and ends. At end points of line vector printing, the deposited drop amount is likely to be significantly large compared to the rest of the printed lines, due to unavoidable acceleration and deceleration. In this study, we proposed a method to solve the printing quality problems by producing droplets at an equally spaced distance, irrespective of the printing speed. For this purpose, an encoder processing unit (EPU was developed, so that the jetting trigger could be generated according to user-defined spacing by using encoder position signals, which are used for the positioning control of the two linear stages.

World wide web and virtual reality in developing and using environmental models

International Nuclear Information System (INIS)

Guariso, G.

2001-01-01

The application of World wide web as an active component of environmental decision support system is still largely unexplored. Environmental problems are distributed in nature, both from the physical and from the social point of view; the Web is thus an ideal tool to share concepts and decisions among multiple interested parties. Also Virtual Reality (VR) that has not find, up to know, a large application in the development and teaching of environmental models. The paper shows some recent applications that highlight the potential of these tools [it

A review of images of nurses and smoking on the World Wide Web.

Science.gov (United States)

Sarna, Linda; Bialous, Stella Aguinaga

2012-01-01

With the advent of the World Wide Web, historic images previously having limited distributions are now widely available. As tobacco use has evolved, so have images of nurses related to smoking. Using a systematic search, the purpose of this article is to describe types of images of nurses and smoking available on the World Wide Web. Approximately 10,000 images of nurses and smoking published over the past century were identified through search engines and digital archives. Seven major themes were identified: nurses smoking, cigarette advertisements, helping patients smoke, "naughty" nurse, teaching women to smoke, smoking in and outside of health care facilities, and antitobacco images. The use of nursing images to market cigarettes was known but the extent of the use of these images has not been reported previously. Digital archives can be used to explore the past, provide a perspective for understanding the present, and suggest directions for the future in confronting negative images of nursing. Copyright © 2012 Elsevier Inc. All rights reserved.

Efficacy of the World Wide Web in K-12 environmental education

Science.gov (United States)

York, Kimberly Jane

1998-11-01

Despite support by teachers, students, and the American public in general, environmental education is not a priority in U.S. schools. Teachers face many barriers to integrating environmental education into K--12 curricula. The focus of this research is teachers' lack of access to environmental education resources. New educational reforms combined with emerging mass communication technologies such as the Internet and World Wide Web present new opportunities for the infusion of environmental content into the curriculum. New technologies can connect teachers and students to a wealth of resources previously unavailable to them. However, significant barriers to using technologies exist that must be overcome to make this promise a reality. Web-based environmental education is a new field and research is urgently needed. If teachers are to use the Web meaningfully in their classrooms, it is essential that their attitudes and perceptions about using this new technology be brought to light. Therefore, this exploratory research investigates teachers' attitudes toward using the Web to share environmental education resources. Both qualitative and quantitative methods were used to investigate this problem. Two surveys were conducted---self-administered mail survey and a Web-based online survey---to elicit teachers perceptions and comments about environmental education and the Web. Preliminary statistical procedures including frequencies, percentages and correlational measures were performed to interpret the data. In-depth interviews and participant-observation methods were used during an extended environmental education curriculum development project with two practicing teachers to gain insights into the process of creating curricula and placing it online. Findings from the both the mail survey and the Web-based survey suggest that teachers are interested in environmental education---97% of respondents for each survey agreed that environmental education should be taught in K

Color management: printing processes - opportunities and limitations

Science.gov (United States)

Ingram, Samuel T.

2002-06-01

Digital tools have impacted traditional methods employed to reproduce color images during the past decade. The shift from a purely photomechanical process in color reproduction to colorimetric reproduction offers tremendous opportunity in the graphic arts industry. But good things do not necessarily come to all in the same package. Printing processes possess different reproduction attributes: tone reproduction, gray balance and color correction requirements are as different as the ingredient sets selected for color reproduction. This paper will provide insight toward understanding advantages and limitations offered by the new digital technologies in printing, publishing and packaging. For the past five years the Clemson University Graphic Communications Department has conducted numerous color projects using the new digital colorimetric tools during the previous decade. Several approaches have been used including experimental research and typical production workflows. The use of colorimetric data in color reproduction has given an opportunity to realize real gains in color use, predictability and consistency. Meeting an image's separation and reproduction requirements for a specified printing process can involve disruption of the anticipated workflow. Understanding the printing process requirements and the fit within the specifications of a colorimetric workflow are critical to the successful adoption of a color managed workflow. The paper will also provide an insight into the issues and challenges experienced with a color managed workflow. The printing processes used include offset litho, narrow and wide-web flexography (paper, liner board, corrugated and film), screen printing (paper board and polycarbonates), and digital imaging with toner, ink and inkjet systems. A proposal for technology integration will be the focus of the presentation drawn from documented experiences in over 300 applications of color management tools. Discussion will include the structure of

The World-Wide Web: An Interface between Research and Teaching in Bioinformatics

Directory of Open Access Journals (Sweden)

James F. Aiton

1994-01-01

Full Text Available The rapid expansion occurring in World-Wide Web activity is beginning to make the concepts of ‘global hypermedia’ and ‘universal document readership’ realistic objectives of the new revolution in information technology. One consequence of this increase in usage is that educators and students are becoming more aware of the diversity of the knowledge base which can be accessed via the Internet. Although computerised databases and information services have long played a key role in bioinformatics these same resources can also be used to provide core materials for teaching and learning. The large datasets and arch ives th at have been compiled for biomedical research can be enhanced with the addition of a variety of multimedia elements (images. digital videos. animation etc.. The use of this digitally stored information in structured and self-directed learning environments is likely to increase as activity across World-Wide Web increases.

The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints.

Science.gov (United States)

Coakley, Meghan F; Hurt, Darrell E; Weber, Nick; Mtingwa, Makazi; Fincher, Erin C; Alekseyev, Vsevelod; Chen, David T; Yun, Alvin; Gizaw, Metasebia; Swan, Jeremy; Yoo, Terry S; Huyen, Yentram

2014-09-01

The National Institutes of Health (NIH) has launched the NIH 3D Print Exchange, an online portal for discovering and creating bioscientifically relevant 3D models suitable for 3D printing, to provide both researchers and educators with a trusted source to discover accurate and informative models. There are a number of online resources for 3D prints, but there is a paucity of scientific models, and the expertise required to generate and validate such models remains a barrier. The NIH 3D Print Exchange fills this gap by providing novel, web-based tools that empower users with the ability to create ready-to-print 3D files from molecular structure data, microscopy image stacks, and computed tomography scan data. The NIH 3D Print Exchange facilitates open data sharing in a community-driven environment, and also includes various interactive features, as well as information and tutorials on 3D modeling software. As the first government-sponsored website dedicated to 3D printing, the NIH 3D Print Exchange is an important step forward to bringing 3D printing to the mainstream for scientific research and education.

Quality of information available on the World Wide Web for patients undergoing thyroidectomy: review.

Science.gov (United States)

Muthukumarasamy, S; Osmani, Z; Sharpe, A; England, R J A

2012-02-01

This study aimed to assess the quality of information available on the World Wide Web for patients undergoing thyroidectomy. The first 50 web-links generated by internet searches using the five most popular search engines and the key word 'thyroidectomy' were evaluated using the Lida website validation instrument (assessing accessibility, usability and reliability) and the Flesch Reading Ease Score. We evaluated 103 of a possible 250 websites. Mean scores (ranges) were: Lida accessibility, 48/63 (27-59); Lida usability, 36/54 (21-50); Lida reliability, 21/51 (4-38); and Flesch Reading Ease, 43.9 (2.6-77.6). The quality of internet health information regarding thyroidectomy is variable. High ranking and popularity are not good indicators of website quality. Overall, none of the websites assessed achieved high Lida scores. In order to prevent the dissemination of inaccurate or commercially motivated information, we recommend independent labelling of medical information available on the World Wide Web.

Environmental Reporting for Global Higher Education Institutions using the World Wide Web.

Science.gov (United States)

Walton, J.; Alabaster, T.; Richardson, S.; Harrison, R.

1997-01-01

Proposes the value of voluntary environmental reporting by higher education institutions as an aid to implementing environmental policies. Suggests that the World Wide Web can provide a fast, up-to-date, flexible, participatory, multidimensional medium for information exchange and management. Contains 29 references. (PVD)

WWW.Cell Biology Education: Using the World Wide Web to Develop a New Teaching Topic

Science.gov (United States)

Blystone, Robert V.; MacAlpine, Barbara

2005-01-01

"Cell Biology Education" calls attention each quarter to several Web sites of educational interest to the biology community. The Internet provides access to an enormous array of potential teaching materials. In this article, the authors describe one approach for using the World Wide Web to develop a new college biology laboratory exercise. As a…

Distributing flight dynamics products via the World Wide Web

Science.gov (United States)

Woodard, Mark; Matusow, David

1996-01-01

The NASA Flight Dynamics Products Center (FDPC), which make available selected operations products via the World Wide Web, is reported on. The FDPC can be accessed from any host machine connected to the Internet. It is a multi-mission service which provides Internet users with unrestricted access to the following standard products: antenna contact predictions; ground tracks; orbit ephemerides; mean and osculating orbital elements; earth sensor sun and moon interference predictions; space flight tracking data network summaries; and Shuttle transport system predictions. Several scientific data bases are available through the service.

Comparison of Fast Roll-to-Roll Flexographic, Inkjet, Flatbed, and Rotary Screen Printing of Metal Back Electrodes for Polymer Solar Cells

DEFF Research Database (Denmark)

Hösel, Markus; Søndergaard, Roar R.; Angmo, Dechan

2013-01-01

carbon[5] and copper has been discussed whereas copper is unlikely to yield the necessary cost reduction and resistance to oxidation. Most reports have employed flatbed or rotary screen printing whereas other methods are available and described later on. The important question to answer is which...

The World Wide Web: A Web Even a Fly Would Love

Science.gov (United States)

Bryson, E.

Ever since my introduction to the World Wide Web (WWW), it's been love at first byte. Searching on the WWW is similar to being able to go to a public library and allow yourself to be transported to any other book or library around the world by looking at a reference or index and clicking your heels together like Dorothy did in "The Wizard of Oz", only the clicking is done with a computer mouse. During this presentation, we will explore the WWW protocols which allow clients and servers to communicate on the Internet. We will demonstrate the ease with which users can navigate the virtual tidal wave of information available with a mere click of a button. In addition, the workshop will discuss the revolutionary aspects of this network information system and how it's impacting our libraries as a primary mechanism for rapid dissemination of knowledge.

Expert knowledge in palliative care on the World Wide Web: palliativedrugs.org.

Science.gov (United States)

Gavrin, Jonathan

2009-01-01

In my last Internet-related article, I speculated that social networking would be the coming wave in the effort to share knowledge among experts in various disciplines. At the time I did not know that a palliative care site on the World Wide Web (WWW), palliativedrugs.com, already provided the infrastructure for sharing expert knowledge in the field. The Web site is an excellent traditional formulary but it is primarily devoted to "unlicensed" ("off-label") use of medications in palliative care, something we in the specialty often do with little to support our interventions except shared knowledge and experience. There is nothing fancy about this Web site. In a good way, its format is a throwback to Web sites of the 1990s. In only the loosest sense can one describe it as "multimedia." Yet, it provides the perfect forum for expert knowledge and is a "must see" resource. Its existing content is voluminous and reliable, filtered and reviewed by renowned clinicians and educators in the field. Although its origin and structure were not specifically designed for social or professional networking, the Web site's format makes it a natural way for practitioners around the world to contribute to an ever-growing body of expertise in palliative care.

Landscaping climate change: a mapping technique for understanding science and technology debates on the world wide web

NARCIS (Netherlands)

Rogers, R.; Marres, N.

2000-01-01

New World Wide Web (web) mapping techniques may inform and ultimately facilitate meaningful participation in current science and technology debates. The technique described here "landscapes" a debate by displaying key "webby" relationships between organizations. "Debate-scaping" plots two

Securing the anonymity of content providers in the World Wide Web

Science.gov (United States)

Demuth, Thomas; Rieke, Andreas

1999-04-01

Nowadays the World Wide Web (WWW) is an established service used by people all over the world. Most of them do not recognize the fact that they reveal plenty of information about themselves or their affiliation and computer equipment to the providers of web pages they connect to. As a result, a lot of services offer users to access web pages unrecognized or without risk of being backtracked, respectively. This kind of anonymity is called user or client anonymity. But on the other hand, an equivalent protection for content providers does not exist, although this feature is desirable for many situations in which the identity of a publisher or content provider shall be hidden. We call this property server anonymity. We will introduce the first system with the primary target to offer anonymity for providers of information in the WWW. Beside this property, it provides also client anonymity. Based on David Chaum's idea of mixes and in relation to the context of the WWW, we explain the term 'server anonymity' motivating the system JANUS which offers both client and server anonymity.

Application of cellulose nanofibers to remove water-based flexographic inks from wastewaters.

Science.gov (United States)

Balea, Ana; Monte, M Concepción; de la Fuente, Elena; Negro, Carlos; Blanco, Ángeles

2017-02-01

Water-based or flexographic inks in paper and plastic industries are more environmentally favourable than organic solvent-based inks. However, their use also creates new challenges because they remain dissolved in water and alter the recycling process. Conventional deinking technologies such as flotation processes do not effectively remove them. Adsorption, coagulation/flocculation, biological and membrane processes are either expensive or have negative health impacts, making the development of alternative methods necessary. Cellulose nanofibers (CNF) are biodegradable, and their structural and mechanical properties are useful for wastewater treatment. TEMPO-oxidised CNF have been evaluated for the decolourisation of wastewaters that contained copper phthalocyanine blue, carbon black and diarlyide yellow pigments. CNF in combination with a cationic polyacrylamide (cPAM) has also been tested. Jar-test methodology was used to evaluate the efficiency of the different treatments and cationic/anionic demand, turbidity and ink concentration in waters were measured. Results show that dual-component system for ink removal has a high potential as an alternative bio-based adsorbent for the removal of water-based inks. In addition, experiments varying CNF and cPAM concentrations were performed to optimise the ink-removal process. Ink concentration reductions of 100%, 87.5% and 83.3% were achieved for copper phthalocyanine blue, carbon black and diarlyide yellow pigments, respectively. Flocculation studies carried out show the decolourisation mechanism during the dual-component treatment of wastewaters containing water-based inks.

Pre-Service Teachers Critically Evaluate Scientific Information on the World-Wide Web: What Makes Information Believable?

Science.gov (United States)

Iding, Marie; Klemm, E. Barbara

2005-01-01

The present study addresses the need for teachers to critically evaluate the credibility, validity, and cognitive load associated with scientific information on Web sites, in order to effectively teach students to evaluate scientific information on the World Wide Web. A line of prior research investigating high school and university students'…

Le world wide web: l'hypermedià sur internet | Houmel | Revue d ...

African Journals Online (AJOL)

The telecommunication's networks technology linked to the electronic document has changed abroad the information specialists' methods of work. The Internet network did a lot in thèse big changes and especially after the World Wide Web intégration wich is a high hypermedia distributed information System. In Algeria lots ...

Network dynamics: The World Wide Web

Science.gov (United States)

Adamic, Lada Ariana

Despite its rapidly growing and dynamic nature, the Web displays a number of strong regularities which can be understood by drawing on methods of statistical physics. This thesis finds power-law distributions in website sizes, traffic, and links, and more importantly, develops a stochastic theory which explains them. Power-law link distributions are shown to lead to network characteristics which are especially suitable for scalable localized search. It is also demonstrated that the Web is a "small world": to reach one site from any other takes an average of only 4 hops, while most related sites cluster together. Additional dynamical properties of the Web graph are extracted from diffusion processes.

AIDS web sites face censorship under new rating schemes.

Science.gov (United States)

1997-08-22

The American Civil Liberties Union (ACLU) issued a position paper regarding the software industry's proposed rating standards that will block and rate information judged unsuitable for minors. Following the U.S. Supreme Court's overturning of the Communications Decency Act, a ruling that maintains a high level of free speech protection over the Internet, the software industry began examining mechanisms to rate online content. Legislators are considering criminal penalties for those who misrate a web page. These moves are seen as damaging to HIV/AIDS prevention and safe sex information web sites that utilize jargon, street language, and explicit diagrams to teach safe sex practices to a wide audience. It is noted that related ratings and censorships do not apply to print material.

THE NEW “UNIVERSAL TRUTH” OF THE WORLD WIDE WEB

OpenAIRE

Alexandru Tăbușcă

2011-01-01

We all see that the world wide web is permanently evolving and developing. New websites are created continuously and push the limits of the old HTML specs in all respects. HTML4 is the real standard for almost 10 years and developers are starting to look for new and improved technologies to help them provide greater functionality. In order to give the authors flexibility and interoperability and to enable much more interactive and innovative websites and applications, HTML5 introduces and enh...

Implications of Web Mercator and its Use in Online Mapping

Science.gov (United States)

Battersby, Sarah E.; Finn, Michael P.; Usery, E. Lynn; Yamamoto, Kristina H.

2014-01-01

Online interactive maps have become a popular means of communicating with spatial data. In most online mapping systems, Web Mercator has become the dominant projection. While the Mercator projection has a long history of discussion about its inappropriateness for general-purpose mapping, particularly at the global scale, and seems to have been virtually phased out for general-purpose global-scale print maps, it has seen a resurgence in popularity in Web Mercator form. This article theorizes on how Web Mercator came to be widely used for online maps and what this might mean in terms of data display, technical aspects of map generation and distribution, design, and cognition of spatial patterns. The authors emphasize details of where the projection excels and where it does not, as well as some of its advantages and disadvantages for cartographic communication, and conclude with some research directions that may help to develop better solutions to the problem of projections for general-purpose, multi-scale Web mapping.

Excimer UV curing in printing

International Nuclear Information System (INIS)

Mehnert, R.

1999-01-01

It is the aim of this study to investigate the potential of 308 run excimer UV curing in web and sheet fed offset printing and to discuss its present status. Using real-time FTIR-ATR and stationary or pulsed monochromatic (313 nm) irradiation chemical and physical factors affecting the curing speed of printing inks such as nature and concentration of photo-initiators, reactivity of the ink binding system, ink thickness and pigmentation, irradiance in the curing plane, oxygen concentration and nitrogen inerting, multiple pulse exposure, the photochemical dark reaction and temperature dependence were studied. The results were used to select optimum conditions for excimer UV curing in respect to ink reactivity, nitrogen inerting and UV exposure and to build an excimer UV curing unit consisting of two 50 W/cm 308 run excimer lamps, power supply, cooling and inerting unit. The excimer UV curing devices were tested under realistic conditions on a web offset press zirkon supra forte and a sheet fed press Heidelberg GTO 52. Maximum curing speeds of 300 m/min in web offset and 8000 sheets per hour in sheet fed offset were obtained

The World Wide Web as a Medium of Instruction: What Works and What Doesn't

Science.gov (United States)

McCarthy, Marianne; Grabowski, Barbara; Hernandez, Angel; Koszalka, Tiffany; Duke, Lee

1997-01-01

A conference was held on March 18-20, 1997 to investigate the lessons learned by the Aeronautics Cooperative Agreement Projects with regard to the most effective strategies for developing instruction for the World Wide Web. The conference was a collaboration among the NASA Aeronautics and Space Transportation Technology Centers (Ames, Dryden, Langley, and Lewis), NASA Headquarters, the University of Idaho and The Pennsylvania State University. The conference consisted of presentations by the Aeronautics Cooperative Agreement Teams, the University of Idaho, and working sessions in which the participants addressed teacher training and support, technology, evaluation and pedagogy. The conference was also undertaken as part of the Dryden Learning Technologies Project which is a collaboration between the Dryden Education Office and The Pennsylvania State University. The DFRC Learning Technology Project goals relevant to the conference are as follows: conducting an analysis of current teacher needs, classroom infrastructure and exemplary instructional World Wide Web sites, and developing models for Web-enhanced learning environments that optimize teaching practices and student learning.

A systematic review of patient inflammatory bowel disease information resources on the World Wide Web.

Science.gov (United States)

Bernard, André; Langille, Morgan; Hughes, Stephanie; Rose, Caren; Leddin, Desmond; Veldhuyzen van Zanten, Sander

2007-09-01

The Internet is a widely used information resource for patients with inflammatory bowel disease, but there is variation in the quality of Web sites that have patient information regarding Crohn's disease and ulcerative colitis. The purpose of the current study is to systematically evaluate the quality of these Web sites. The top 50 Web sites appearing in Google using the terms "Crohn's disease" or "ulcerative colitis" were included in the study. Web sites were evaluated using a (a) Quality Evaluation Instrument (QEI) that awarded Web sites points (0-107) for specific information on various aspects of inflammatory bowel disease, (b) a five-point Global Quality Score (GQS), (c) two reading grade level scores, and (d) a six-point integrity score. Thirty-four Web sites met the inclusion criteria, 16 Web sites were excluded because they were portals or non-IBD oriented. The median QEI score was 57 with five Web sites scoring higher than 75 points. The median Global Quality Score was 2.0 with five Web sites achieving scores of 4 or 5. The average reading grade level score was 11.2. The median integrity score was 3.0. There is marked variation in the quality of the Web sites containing information on Crohn's disease and ulcerative colitis. Many Web sites suffered from poor quality but there were five high-scoring Web sites.

WEBSLIDE: A "Virtual" Slide Projector Based on World Wide Web

Science.gov (United States)

Barra, Maria; Ferrandino, Salvatore; Scarano, Vittorio

1999-03-01

We present here the design key concepts of WEBSLIDE, a software project whose objective is to provide a simple, cheap and efficient solution for showing slides during lessons in computer labs. In fact, WEBSLIDE allows the video monitors of several client machines (the "STUDENTS") to be synchronously updated by the actions of a particular client machine, called the "INSTRUCTOR." The system is based on the World Wide Web and the software components of WEBSLIDE mainly consists in a WWW server, browsers and small Cgi-Bill scripts. What makes WEBSLIDE particularly appealing for small educational institutions is that WEBSLIDE is built with "off the shelf" products: it does not involve using a specifically designed program but any Netscape browser, one of the most popular browsers available on the market, is sufficient. Another possible use is to use our system to implement "guided automatic tours" through several pages or Intranets internal news bulletins: the company Web server can broadcast to all employees relevant information on their browser.

Do We Need to Impose More Regulation Upon the World Wide Web? -A Metasystem Analysis

Directory of Open Access Journals (Sweden)

John P. van Gigch

2000-01-01

Full Text Available Every day a new problem attributable to the World Wide Web's lack of formal structure and/or organization is made public. What arguably could be represented as one of its main strengths is rapidly turning out to be one of its most flagrant weaknesses. The intent of this article is to show the need to establish a more formal organization than presently exists over the World Wide Web. (This article will use the terms the Internet and Cyberspace interchangeably. It is proposed that this formal organization take the form of a metacontrol system--to be explained-- and rely, at least in part, for this control to self-regulate. The so-called metasystem system would be responsible for preventing some of the unanticipated situations that take place in cyberspace and that, due to the web's lack of maturity, have not been encountered heretofore. Some activities, such as the denial-of-service (DoS attacks, may well be illicit. Others, like the question of establishing a world-wide democratic board to administer the Internet's address system, are so new that there are no technical, legal or political precedents to ensure its design will succeed. What is needed is a formal, over-arching control system, i.e. a "metasystem," to arbitrate over controversies, decide on the legality of new policies and, in general, act as a metalevel controller over the activities of the virtual community called Cyberspace. The World Wide Web Consortium has emerged as a possible candidate for this role.This paper uses control theory to define both the problem and the proposed solution. Cyberspace lacks a metacontroller that can be used to resolve the many problems that arise when a new organizational configuration, such as the Internet, is created and when questions surface about the extent to which new activities interfere with individual or corporate freedoms.

Reading on the World Wide Web: Dealing with conflicting information from multiple sources

NARCIS (Netherlands)

Van Strien, Johan; Brand-Gruwel, Saskia; Boshuizen, Els

2011-01-01

Van Strien, J. L. H., Brand-Gruwel, S., & Boshuizen, H. P. A. (2011, August). Reading on the World Wide Web: Dealing with conflicting information from multiple sources. Poster session presented at the biannual conference of the European Association for Research on Learning and Instruction, Exeter,

Analysis of Website and Marketing Promotion To Facilitate Online Marketing in Printing Retail Industry

OpenAIRE

Patankar, Ashutosh

2011-01-01

In today’s era of internet with evolution of Web 2.0, all the organisations dealing in retail are going online. In fact online presence has been mandatory requirement today and does no longer hold any competitive advantage by far. In country like India, printing retail industry has been found to be in a state of growth. There is wide array of literature available that analyzes critical success factors for online marketing in general as well as precisely for retail industry. This management pr...

Delivering an Alternative Medicine Resource to the User's Desktop via World Wide Web.

Science.gov (United States)

Li, Jie; Wu, Gang; Marks, Ellen; Fan, Weiyu

1998-01-01

Discusses the design and implementation of a World Wide Web-based alternative medicine virtual resource. This homepage integrates regional, national, and international resources and delivers library services to the user's desktop. Goals, structure, and organizational schemes of the system are detailed, and design issues for building such a…

Electron beam hardening type copper plate printing ink

International Nuclear Information System (INIS)

Kawamura, Eiji; Inoue, Mitsuo; Kusaki, Satoichiro

1989-01-01

Copper plate printing is the printing method of filling ink in the parts of concave printing elements on a type area, and transferring the ink to a base, and it is the feature that the ink in the printing element parts of a print rises. Copper plate prints show profound feeling, in addition, its effect of preventing forgery is high. This method is generally called engraving printing, and is used frequently for printing various bills and artistic prints. The electron beam irradiation apparatus installed in the laboratory of the Printing Bureau, Ministry of Finance, is an experimental machine of area beam type, and is so constructed as to do batch conveyance and web conveyance. As the ink in printing element parts rises, the offset at the delivery part of a printing machine becomes a problem. Electron beam is superior in its transparency, and can dry instantaneously to the inside of opaque ink. At 200 kV of acceleration voltage, the ink of copper plate prints can be hardened by electron beam irradiation. The dilution monomers as the vehicle for ink were tested for their dilution capability and the effect of electron beam hardening. The problem in the utilization of electron beam is the deterioration of papers, and the counter-measures were tested. (K.I.)

reCAPTCHA: human-based character recognition via Web security measures.

Science.gov (United States)

von Ahn, Luis; Maurer, Benjamin; McMillen, Colin; Abraham, David; Blum, Manuel

2008-09-12

CAPTCHAs (Completely Automated Public Turing test to tell Computers and Humans Apart) are widespread security measures on the World Wide Web that prevent automated programs from abusing online services. They do so by asking humans to perform a task that computers cannot yet perform, such as deciphering distorted characters. Our research explored whether such human effort can be channeled into a useful purpose: helping to digitize old printed material by asking users to decipher scanned words from books that computerized optical character recognition failed to recognize. We showed that this method can transcribe text with a word accuracy exceeding 99%, matching the guarantee of professional human transcribers. Our apparatus is deployed in more than 40,000 Web sites and has transcribed over 440 million words.

World Wide Web Usage Mining Systems and Technologies

Directory of Open Access Journals (Sweden)

Wen-Chen Hu

2003-08-01

Full Text Available Web usage mining is used to discover interesting user navigation patterns and can be applied to many real-world problems, such as improving Web sites/pages, making additional topic or product recommendations, user/customer behavior studies, etc. This article provides a survey and analysis of current Web usage mining systems and technologies. A Web usage mining system performs five major tasks: i data gathering, ii data preparation, iii navigation pattern discovery, iv pattern analysis and visualization, and v pattern applications. Each task is explained in detail and its related technologies are introduced. A list of major research systems and projects concerning Web usage mining is also presented, and a summary of Web usage mining is given in the last section.

The PEP-II/BaBar Project-Wide Database using World Wide Web and Oracle*Case

International Nuclear Information System (INIS)

Chan, A.; Crane, G.; MacGregor, I.; Meyer, S.

1995-12-01

The PEP-II/BaBar Project Database is a tool for monitoring the technical and documentation aspects of the accelerator and detector construction. It holds the PEP-II/BaBar design specifications, fabrication and installation data in one integrated system. Key pieces of the database include the machine parameter list, components fabrication and calibration data, survey and alignment data, property control, CAD drawings, publications and documentation. This central Oracle database on a UNIX server is built using Oracle*Case tools. Users at the collaborating laboratories mainly access the data using World Wide Web (WWW). The Project Database is being extended to link to legacy databases required for the operations phase

An Ontology of Quality Initiatives and a Model for Decentralized, Collaborative Quality Management on the (Semantic) World Wide Web

Science.gov (United States)

2001-01-01

This editorial provides a model of how quality initiatives concerned with health information on the World Wide Web may in the future interact with each other. This vision fits into the evolving "Semantic Web" architecture - ie, the prospective that the World Wide Web may evolve from a mess of unstructured, human-readable information sources into a global knowledge base with an additional layer providing richer and more meaningful relationships between resources. One first prerequisite for forming such a "Semantic Web" or "web of trust" among the players active in quality management of health information is that these initiatives make statements about themselves and about each other in a machine-processable language. I present a concrete model on how this collaboration could look, and provide some recommendations on what the role of the World Health Organization (WHO) and other policy makers in this framework could be. PMID:11772549

Three-dimensional bio-printing.

Science.gov (United States)

Gu, Qi; Hao, Jie; Lu, YangJie; Wang, Liu; Wallace, Gordon G; Zhou, Qi

2015-05-01

Three-dimensional (3D) printing technology has been widely used in various manufacturing operations including automotive, defence and space industries. 3D printing has the advantages of personalization, flexibility and high resolution, and is therefore becoming increasingly visible in the high-tech fields. Three-dimensional bio-printing technology also holds promise for future use in medical applications. At present 3D bio-printing is mainly used for simulating and reconstructing some hard tissues or for preparing drug-delivery systems in the medical area. The fabrication of 3D structures with living cells and bioactive moieties spatially distributed throughout will be realisable. Fabrication of complex tissues and organs is still at the exploratory stage. This review summarize the development of 3D bio-printing and its potential in medical applications, as well as discussing the current challenges faced by 3D bio-printing.

The World Wide Web and Technology Transfer at NASA Langley Research Center

Science.gov (United States)

Nelson, Michael L.; Bianco, David J.

1994-01-01

NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.

Network Formation and the Structure of the Commercial World Wide Web

OpenAIRE

Zsolt Katona; Miklos Sarvary

2008-01-01

We model the commercial World Wide Web as a directed graph that emerges as the equilibrium of a game in which utility maximizing websites purchase (advertising) in-links from each other while also setting the price of these links. In equilibrium, higher content sites tend to purchase more advertising links (mirroring the Dorfman-Steiner rule) while selling less advertising links themselves. As such, there seems to be specialization across sites in revenue models: high content sites tend to ea...

Application of World Wide Web (W3) Technologies in Payload Operations

Science.gov (United States)

Sun, Charles; Windrem, May; Picinich, Lou

1996-01-01

World Wide Web (W3) technologies are considered in relation to their application to space missions. It is considered that such technologies, including the hypertext transfer protocol and the Java object-oriented language, offer a powerful and relatively inexpensive framework for distributed application software development. The suitability of these technologies for payload monitoring systems development is discussed, and the experience gained from the development of an insect habitat monitoring system based on W3 technologies is reported.

Googling DNA sequences on the World Wide Web.

Science.gov (United States)

Hajibabaei, Mehrdad; Singer, Gregory A C

2009-11-10

New web-based technologies provide an excellent opportunity for sharing and accessing information and using web as a platform for interaction and collaboration. Although several specialized tools are available for analyzing DNA sequence information, conventional web-based tools have not been utilized for bioinformatics applications. We have developed a novel algorithm and implemented it for searching species-specific genomic sequences, DNA barcodes, by using popular web-based methods such as Google. We developed an alignment independent character based algorithm based on dividing a sequence library (DNA barcodes) and query sequence to words. The actual search is conducted by conventional search tools such as freely available Google Desktop Search. We implemented our algorithm in two exemplar packages. We developed pre and post-processing software to provide customized input and output services, respectively. Our analysis of all publicly available DNA barcode sequences shows a high accuracy as well as rapid results. Our method makes use of conventional web-based technologies for specialized genetic data. It provides a robust and efficient solution for sequence search on the web. The integration of our search method for large-scale sequence libraries such as DNA barcodes provides an excellent web-based tool for accessing this information and linking it to other available categories of information on the web.

Software Project Management and Measurement on the World-Wide-Web (WWW)

Science.gov (United States)

Callahan, John; Ramakrishnan, Sudhaka

1996-01-01

We briefly describe a system for forms-based, work-flow management that helps members of a software development team overcome geographical barriers to collaboration. Our system, called the Web Integrated Software Environment (WISE), is implemented as a World-Wide-Web service that allows for management and measurement of software development projects based on dynamic analysis of change activity in the workflow. WISE tracks issues in a software development process, provides informal communication between the users with different roles, supports to-do lists, and helps in software process improvement. WISE minimizes the time devoted to metrics collection and analysis by providing implicit delivery of messages between users based on the content of project documents. The use of a database in WISE is hidden from the users who view WISE as maintaining a personal 'to-do list' of tasks related to the many projects on which they may play different roles.

Tapping the Resources of the World Wide Web for Inquiry in Middle Schools.

Science.gov (United States)

Windschitl, Mark; Irby, Janet

1999-01-01

Argues for the cautiously expanded use of the World Wide Web for inquiry across the middle school curriculum, noting how the Internet can be used in schools. Describes the Internet and appraises its distractions and academic utility, identifying features that support student inquiry in science, mathematics, social studies, and language arts. (JPB)

SVG-Based Web Publishing

Science.gov (United States)

Gao, Jerry Z.; Zhu, Eugene; Shim, Simon

2003-01-01

With the increasing applications of the Web in e-commerce, advertising, and publication, new technologies are needed to improve Web graphics technology due to the current limitation of technology. The SVG (Scalable Vector Graphics) technology is a new revolutionary solution to overcome the existing problems in the current web technology. It provides precise and high-resolution web graphics using plain text format commands. It sets a new standard for web graphic format to allow us to present complicated graphics with rich test fonts and colors, high printing quality, and dynamic layout capabilities. This paper provides a tutorial overview about SVG technology and its essential features, capability, and advantages. The reports a comparison studies between SVG and other web graphics technologies.

Spiders and Worms and Crawlers, Oh My: Searching on the World Wide Web.

Science.gov (United States)

Eagan, Ann; Bender, Laura

Searching on the world wide web can be confusing. A myriad of search engines exist, often with little or no documentation, and many of these search engines work differently from the standard search engines people are accustomed to using. Intended for librarians, this paper defines search engines, directories, spiders, and robots, and covers basics…

Integration of Web mining and web crawler: Relevance and State of Art

OpenAIRE

Subhendu kumar pani; Deepak Mohapatra,; Bikram Keshari Ratha

2010-01-01

This study presents the role of web crawler in web mining environment. As the growth of the World Wide Web exceeded all expectations,the research on Web mining is growing more and more.web mining research topic which combines two of the activated research areas: Data Mining and World Wide Web .So, the World Wide Web is a very advanced area for data mining research. Search engines that are based on web crawling framework also used in web mining to find theinteracted web pages. This paper discu...

High-Throughput Printing Process for Flexible Electronics

Science.gov (United States)

Hyun, Woo Jin

Printed electronics is an emerging field for manufacturing electronic devices with low cost and minimal material waste for a variety of applications including displays, distributed sensing, smart packaging, and energy management. Moreover, its compatibility with roll-to-roll production formats and flexible substrates is desirable for continuous, high-throughput production of flexible electronics. Despite the promise, however, the roll-to-roll production of printed electronics is quite challenging due to web movement hindering accurate ink registration and high-fidelity printing. In this talk, I will present a promising strategy for roll-to-roll production using a novel printing process that we term SCALE (Self-aligned Capillarity-Assisted Lithography for Electronics). By utilizing capillarity of liquid inks on nano/micro-structured substrates, the SCALE process facilitates high-resolution and self-aligned patterning of electrically functional inks with greatly improved printing tolerance. I will show the fabrication of key building blocks (e.g. transistor, resistor, capacitor) for electronic circuits using the SCALE process on plastics.

Information consumerism on the World Wide Web: implications for dermatologists and patients.

Science.gov (United States)

Travers, Robin L

2002-09-01

The World Wide Web (WWW) is continuing to grow exponentially both in terms of numbers of users and numbers of web pages. There is a trend toward the increasing use of the WWW for medical educational purposes, both among physicians and patients alike. The multimedia capabilities of this evolving medium are particularly relevant to visual medical specialties such as dermatology. The origins of information consumerism on the WWW are examined, and the public health issues surrounding dermatologic information and misinformation, and how consumers navigate through the WWW are reviewed. The economic realities of medical information as a "capital good," and the impact this has on dermatologic information sources on the WWW are also discussed.Finally, strategies for guiding consumers and ourselves toward credible medical information sources on the WWW are outlined.

Compact Optical Discs and the World Wide Web: Two Mediums in Digitized Information Delivery Services

Directory of Open Access Journals (Sweden)

Ziyu Lin

1999-10-01

Full Text Available

頁次：40-52

Compact optical discs (CDs and the World Wide Web (the Web are two mechanisms that contemporary libraries extensively use for digitized information storage, dissemination, and retrieval. The Web features an unparalleled global accessibility free from many previously known temporal and spatial restrictions. Its real-time update capability is impossible for CDs. Web-based information delivery can reduce the cost in hardware and software ownership and management of a local library, and provide one-to-one zcustomization to better serve library's clients. The current limitations of the Web include inadequate speed in data transmission, particularly for multimedia applications, and its insufficient reliability, search capabilities, and security. In comparison, speed, quality, portability, and reliability are the current advantages of CDs over the Web. These features, together with the trend in the PC industry and market, suggest that CDs will exist and continue to develop. CD/Web hybrids can combine the best of both developing mechanisms and offer optimal results. Through a comparison of CDs and the Web, it is argued that the functionality and unique features of a technology determine its future.

Medium area, flexible single and tandem junction solar cells based on roll coated semi-random copolymers

DEFF Research Database (Denmark)

Andersen, Thomas Rieks; Dam, Henrik Friis; Burkhart, Beate

2014-01-01

laboratory roll-coater using only slot-die coating and flexographic printing under ambient conditions on a flexible ITO-free substrate. In order to overcome a low JSC and FF obtained for single junction devices, devices were also prepared in a tandem geometry making it possible to employ thinner junction...... films. Power conversion efficiencies of up to 1.36% and 1.31% were achieved for the tandem and single junction geometries, respectively....

GLIDERS - A web-based search engine for genome-wide linkage disequilibrium between HapMap SNPs

Directory of Open Access Journals (Sweden)

Broxholme John

2009-10-01

Full Text Available Abstract Background A number of tools for the examination of linkage disequilibrium (LD patterns between nearby alleles exist, but none are available for quickly and easily investigating LD at longer ranges (>500 kb. We have developed a web-based query tool (GLIDERS: Genome-wide LInkage DisEquilibrium Repository and Search engine that enables the retrieval of pairwise associations with r2 ≥ 0.3 across the human genome for any SNP genotyped within HapMap phase 2 and 3, regardless of distance between the markers. Description GLIDERS is an easy to use web tool that only requires the user to enter rs numbers of SNPs they want to retrieve genome-wide LD for (both nearby and long-range. The intuitive web interface handles both manual entry of SNP IDs as well as allowing users to upload files of SNP IDs. The user can limit the resulting inter SNP associations with easy to use menu options. These include MAF limit (5-45%, distance limits between SNPs (minimum and maximum, r2 (0.3 to 1, HapMap population sample (CEU, YRI and JPT+CHB combined and HapMap build/release. All resulting genome-wide inter-SNP associations are displayed on a single output page, which has a link to a downloadable tab delimited text file. Conclusion GLIDERS is a quick and easy way to retrieve genome-wide inter-SNP associations and to explore LD patterns for any number of SNPs of interest. GLIDERS can be useful in identifying SNPs with long-range LD. This can highlight mis-mapping or other potential association signal localisation problems.

Service-oriented workflow to efficiently and automatically fulfill products in a highly individualized web and mobile environment

Science.gov (United States)

Qiao, Mu

2015-03-01

Service Oriented Architecture1 (SOA) is widely used in building flexible and scalable web sites and services. In most of the web or mobile photo book and gifting business space, the products ordered are highly variable without a standard template that one can substitute texts or images from similar to that of commercial variable data printing. In this paper, the author describes a SOA workflow in a multi-sites, multi-product lines fulfillment system where three major challenges are addressed: utilization of hardware and equipment, highly automation with fault recovery, and highly scalable and flexible with order volume fluctuation.

Comparison of student outcomes and preferences in a traditional vs. World Wide Web-based baccalaureate nursing research course.

Science.gov (United States)

Leasure, A R; Davis, L; Thievon, S L

2000-04-01

The purpose of this project was to compare student outcomes in an undergraduate research course taught using both World Wide Web-based distance learning technology and traditional pedagogy. Reasons given for enrolling in the traditional classroom section included the perception of increased opportunity for interaction, decreased opportunity to procrastinate, immediate feedback, and more meaningful learning activities. Reasons for selecting the Web group section included cost, convenience, and flexibility. Overall, there was no significant difference in examination scores between the two groups on the three multiple-choice examinations or for the course grades (t = -.96, P = .343). Students who reported that they were self-directed and had the ability to maintain their own pace and avoid procrastination were most suited to Web-based courses. The Web-based classes can help provide opportunities for methods of communication that are not traditionally nurtured in traditional classroom settings. Secondary benefits of the World Wide Web-based course were to increase student confidence with the computer, and introduce them to skills and opportunities they would not have had in the classroom. Additionally, over time and with practice, student's writing skills improved.

Beyond Piñatas, Fortune Cookies, and Wooden Shoes: Using the World Wide Web to Help Children Explore the Whole Wide World

Science.gov (United States)

Kirkwood, Donna; Shulsky, Debra; Willis, Jana

2014-01-01

The advent of technology and access to the internet through the World Wide Web have stretched the traditional ways of teaching social studies beyond classroom boundaries. This article explores how teachers can create authentic and contextualized cultural studies experiences for young children by integrating social studies and technology. To…

E-Learning and Role of World Wide Web in E-Learning

OpenAIRE

Jahankhani, Hossein

2012-01-01

This paper reviews some of the aspects of the E-learning through the World Wide Web. E-revolution as new phenomenon influenced the society by its means and strategies. E-learning is one of the sub-products of E-revolution, towards making more convenient and effective learning. In time Internet become a source of information, people start to learn through the Internet instead of books. It gives the flexibility to remote access at any time. The working people and the students are inspired by th...

3D Bio-Printing Review

Science.gov (United States)

Du, Xianbin

2018-01-01

Ultimate goal of tissue engineering is to replace pathological or necrotic body tissue or organ by artificial tissue or organ and tissue engineering is a very promising research field. 3D bio-printing is a kind of emerging technologies and a branch of tissue engineering. It has made significant progress in the past decade. 3D bio-printing can realize tissue and organ construction in vitro and has wide application in basic research and pharmacy. This paper is to make an analysis and review on 3D bio-printing from the perspectives of bioink, printing technology and technology application.

Trends in the wide web converting markets for UV curing

International Nuclear Information System (INIS)

Fisher, R.

1999-01-01

As we prepare to enter a new decade, the use of ultraviolet (UV) energy to initiate the polymerization of coatings in the wide web segment of the Converting industry continues to increase. As is typical in the Converting industry, while many of the significant advances in technology have been developed around the world, they have been driven initially by the Western European markets. This was true with regards to the introduction of water-borne Pressure Sensitive Adhesives and thermal curing 100% solids silicone release coatings during the late 1970s and early 1980s, but this trend has changed with regards to the current state-of-the-art in UV curing

Affordances of students' using the World Wide Web as a publishing medium in project-based learning environments

Science.gov (United States)

Bos, Nathan Daniel

This dissertation investigates the emerging affordance of the World Wide Web as a place for high school students to become authors and publishers of information. Two empirical studies lay groundwork for student publishing by examining learning issues related to audience adaptation in writing, motivation and engagement with hypermedia, design, problem-solving, and critical evaluation. Two models of student publishing on the World Wide Web were investigated over the course of two 11spth grade project-based science curriculums. In the first curricular model, students worked in pairs to design informative hypermedia projects about infectious diseases that were published on the Web. Four case studies were written, drawing on both product- and process-related data sources. Four theoretically important findings are illustrated through these cases: (1) multimedia, especially graphics, seemed to catalyze some students' design processes by affecting the sequence of their design process and by providing a connection between the science content and their personal interest areas, (2) hypermedia design can demand high levels of analysis and synthesis of science content, (3) students can learn to think about science content representation through engagement with challenging design tasks, and (4) students' consideration of an outside audience can be facilitated by teacher-given design principles. The second Web-publishing model examines how students critically evaluate scientific resources on the Web, and how students can contribute to the Web's organization and usability by publishing critical reviews. Students critically evaluated Web resources using a four-part scheme: summarization of content, content, evaluation of credibility, evaluation of organizational structure, and evaluation of appearance. Content analyses comparing students' reviews and reviewed Web documents showed that students were proficient at summarizing content of Web documents, identifying their publishing

Dynamic analysis of temporal moisture profiles in heatset printing studied with near-infrared spectroscopy

International Nuclear Information System (INIS)

Tåg, C-M; Toiviainen, M; Juuti, M; Gane, P A C

2010-01-01

Dynamic analysis of the water transfer onto coated paper, and its permeation and absorption into the porous structure were studied online in a full-scale heatset web offset printing environment. The moisture content of the paper was investigated at five different positions during the printing process. Changes in the moisture content of the paper were studied as a function of the web temperature, printing speed and silicone application in the folding unit positioned after the hot air drying oven. Additionally, the influence of fountain solution composition on the pick-up by the paper was investigated. The water content of the fountain solution transferred to the paper from the printing units was observed as changes in near-infrared absorbance. A calibration data set enabled the subsequent quantification of the dynamic moisture content of the paper at the studied locations. An increase in the printing speed reduced the water transfer to the paper and an increase in web temperature resulted in a reduction in the moisture content. An increase in the dosage level of the water–silicone mixture was observed as a re-moistening effect of the paper. Differences in the drying strategy resulted in different moisture profiles depending on the type of fountain solution used. As a conclusion, the near-infrared signal provides an effective way to characterize the moisture dynamics online at different press units

How Students Evaluate Information and Sources when Searching the World Wide Web for Information

Science.gov (United States)

Walraven, Amber; Brand-Gruwel, Saskia; Boshuizen, Henny P. A.

2009-01-01

The World Wide Web (WWW) has become the biggest information source for students while solving information problems for school projects. Since anyone can post anything on the WWW, information is often unreliable or incomplete, and it is important to evaluate sources and information before using them. Earlier research has shown that students have…

INTERNET and information about nuclear sciences. The world wide web virtual library: nuclear sciences

International Nuclear Information System (INIS)

Kuruc, J.

1999-01-01

In this work author proposes to constitute new virtual library which should centralize the information from nuclear disciplines on the INTERNET, in order to them to give first and foremost the connection on the most important links in set nuclear sciences. The author has entitled this new virtual library The World Wide Web Library: Nuclear Sciences. By constitution of this virtual library next basic principles were chosen: home pages of international organizations important from point of view of nuclear disciplines; home pages of the National Nuclear Commissions and governments; home pages of nuclear scientific societies; web-pages specialized on nuclear problematic, in general; periodical tables of elements and isotopes; web-pages aimed on Chernobyl crash and consequences; web-pages with antinuclear aim. Now continue the links grouped on web-pages according to single nuclear areas: nuclear arsenals; nuclear astrophysics; nuclear aspects of biology (radiobiology); nuclear chemistry; nuclear company; nuclear data centres; nuclear energy; nuclear energy, environmental aspects of (radioecology); nuclear energy info centres; nuclear engineering; nuclear industries; nuclear magnetic resonance; nuclear material monitoring; nuclear medicine and radiology; nuclear physics; nuclear power (plants); nuclear reactors; nuclear risk; nuclear technologies and defence; nuclear testing; nuclear tourism; nuclear wastes; nuclear wastes. In these single groups web-links will be concentrated into following groups: virtual libraries and specialized servers; science; nuclear societies; nuclear departments of the academic institutes; nuclear research institutes and laboratories; centres, info links

World Wide Webs: Crossing the Digital Divide through Promotion of Public Access

Science.gov (United States)

Coetzee, Liezl

“As Bill Gates and Steve Case proclaim the global omnipresence of the Internet, the majority of non-Western nations and 97 per cent of the world's population remain unconnected to the net for lack of money, access, or knowledge. This exclusion of so vast a share of the global population from the Internet sharply contradicts the claims of those who posit the World Wide Web as a ‘universal' medium of egalitarian communication.” (Trend 2001:2)

Digital libraries and World Wide Web sites and page persistence.

Directory of Open Access Journals (Sweden)

Wallace Koehler

1999-01-01

Full Text Available Web pages and Web sites, some argue, can either be collected as elements of digital or hybrid libraries, or, as others would have it, the WWW is itself a library. We begin with the assumption that Web pages and Web sites can be collected and categorized. The paper explores the proposition that the WWW constitutes a library. We conclude that the Web is not a digital library. However, its component parts can be aggregated and included as parts of digital library collections. These, in turn, can be incorporated into "hybrid libraries." These are libraries with both traditional and digital collections. Material on the Web can be organized and managed. Native documents can be collected in situ, disseminated, distributed, catalogueed, indexed, controlled, in traditional library fashion. The Web therefore is not a library, but material for library collections is selected from the Web. That said, the Web and its component parts are dynamic. Web documents undergo two kinds of change. The first type, the type addressed in this paper, is "persistence" or the existence or disappearance of Web pages and sites, or in a word the lifecycle of Web documents. "Intermittence" is a variant of persistence, and is defined as the disappearance but reappearance of Web documents. At any given time, about five percent of Web pages are intermittent, which is to say they are gone but will return. Over time a Web collection erodes. Based on a 120-week longitudinal study of a sample of Web documents, it appears that the half-life of a Web page is somewhat less than two years and the half-life of a Web site is somewhat more than two years. That is to say, an unweeded Web document collection created two years ago would contain the same number of URLs, but only half of those URLs point to content. The second type of change Web documents experience is change in Web page or Web site content. Again based on the Web document samples, very nearly all Web pages and sites undergo some

Web Page Recommendation Using Web Mining

OpenAIRE

Modraj Bhavsar; Mrs. P. M. Chavan

2014-01-01

On World Wide Web various kind of content are generated in huge amount, so to give relevant result to user web recommendation become important part of web application. On web different kind of web recommendation are made available to user every day that includes Image, Video, Audio, query suggestion and web page. In this paper we are aiming at providing framework for web page recommendation. 1) First we describe the basics of web mining, types of web mining. 2) Details of each...

From theater to the world wide web--a new online era for surgical education.

LENUS (Irish Health Repository)

O'Leary, D Peter

2012-07-01

Traditionally, surgical education has been confined to operating and lecture theaters. Access to the World Wide Web and services, such as YouTube and iTunes has expanded enormously. Each week throughout Ireland, nonconsultant hospital doctors work hard to create presentations for surgical teaching. Once presented, these valuable presentations are often never used again.

Enhancement of shear strength and ductility for reinforced concrete wide beams due to web reinforcement

Directory of Open Access Journals (Sweden)

M. Said

2013-12-01

Full Text Available The shear behavior of reinforced concrete wide beams was investigated. The experimental program consisted of nine beams of 29 MPa concrete strength tested with a shear span-depth ratio equal to 3.0. One of the tested beams had no web reinforcement as a control specimen. The flexure mode of failure was secured for all of the specimens to allow for shear mode of failure. The key parameters covered in this investigation are the effect of the existence, spacing, amount and yield stress of the vertical stirrups on the shear capacity and ductility of the tested wide beams. The study shows that the contribution of web reinforcement to the shear capacity is significant and directly proportional to the amount and spacing of the shear reinforcement. The increase in the shear capacity ranged from 32% to 132% for the range of the tested beams compared with the control beam. High grade steel was more effective in the contribution of the shear strength of wide beams. Also, test results demonstrate that the shear reinforcement significantly enhances the ductility of the wide beams. In addition, shear resistances at failure recorded in this study are compared to the analytical strengths calculated according to the current Egyptian Code and the available international codes. The current study highlights the need to include the contribution of shear reinforcement in the Egyptian Code requirements for shear capacity of wide beams.

Three-Dimensional Printing Surgical Applications.

Science.gov (United States)

AlAli, Ahmad B; Griffin, Michelle F; Butler, Peter E

2015-01-01

Three-dimensional printing, a technology used for decades in the industrial field, gains a lot of attention in the medical field for its potential benefits. With advancement of desktop printers, this technology is accessible and a lot of research is going on in the medical field. To evaluate its application in surgical field, which may include but not limited to surgical planning, surgical education, implants, and prosthesis, which are the focus of this review. Research was conducted by searching PubMed, Web of science, and other reliable sources. We included original articles and excluded articles based on animals, those more than 10 years old, and those not in English. These articles were evaluated, and relevant studies were included in this review. Three-dimensional printing shows a potential benefit in surgical application. Printed implants were used in patient in a few cases and show successful results; however, longer follow-up and more trials are needed. Surgical and medical education is believed to be more efficient with this technology than the current practice. Printed surgical instrument and surgical planning are also believed to improve with three-dimensional printing. Three-dimensional printing can be a very powerful tool in the near future, which can aid the medical field that is facing a lot of challenges and obstacles. However, despite the reported results, further research on larger samples and analytical measurements should be conducted to ensure this technology's impact on the practice.

Print Finishing: From Manual to Automated Print Finishing

Directory of Open Access Journals (Sweden)

Gareth Ward

2004-12-01

Full Text Available Meeting the demand for faster turnrounds and shorter print runs goes beyond making the printing press easier to set up and change. There is little point in producing plates and then sheets from a press if the post press area does not change to keep abreast of developments in prepress and the print room. The greatest impact is going to come from JDF, the end to end production data format which is finding wide spread acceptance in print areas. To date finishing equipment manufacturers are not as well represented within the CIP4 organisation as prepress and press vendors, but the major manufacturers are members. All are working to the goal of complete connectivity.The idea of JDF is that if the format of a print product like a magazine is known during the creation phases, the information can be used to preset machinery that is going to be used to produce it, so avoiding input errors and saving manufacturing time.A second aspect to JDF is that information about performance and progress is gathered and can be retrieved from a central point or made available to a customer. Production scheduling and costing becomes more accurate and customer relationships are deepened. However JDF to its fullest extent is not yet in use in connecting the finishing area to the rest of the printing plant. Around the world different companies are testing the idea of JDF to connect saddle stitchers, guillotines and binders with frantic work underway to be able to show results soon.

Two virtual astro refresher courses on the world-wide-web

International Nuclear Information System (INIS)

Goldwein, Joel W.

1997-01-01

Purpose/Objective: The Internet offers a novel venue for providing educational material to radiation oncologists. This exhibit demonstrates its utility for providing the complete content of two past ASTRO refresher courses. Materials and Methods: The audio recording, handout and slides from the 1995 ASTRO refresher course entitled 'Radiation Therapy for Pediatric Brain Tumors; Standards of Care, Current Clinical Trials and New Directions' and the 1996 ASTRO refresher course entitled 'Internet-based communications in Radiation Oncology' were digitized and placed on an Internet World-Wide-Web site. The Web address was posted on the refresher course handout and in the meeting book ('http://goldwein 1.xrt.upenn.edu/brain95.html' and 'http://goldwein 1.xrt.upenn.edu/astro96/'). The computer distributing this material is an Intel-based 486 DEC50 personal computer with a 50 Mhz processor running Windows NT 3.51 workstation. Software utilized to distribute the material is in the public domain and includes EWMAC's 'httpd', and Progressive Network's 'RealAudio Server' and 'Encoder'. The University's dedicated Internet connection is used to 'serve' this material. Results: The two approximately 100 minute lectures have been encoded into several 'RealAudio' files totaling 10 Megabytes in size. These files are accessible with moderate to excellent quality and speed utilizing as little as a 14.4k modem connection to the Internet. Use of 'streaming' technology provides a means for playing the audio files over the Internet after downloading only a small portion of the files. The time required to digitize the material has been approximately 40 hours, with most time related to digitizing slides from a Powerpoint presentation. Not all slides have been digitized as of this time. To date, approximately 400 accesses to this resource have been logged on the system. Seven electronic comment forms for the second course have all rated it as 'superior'. Pitfalls include the difficulty

Navigational Structure on the World Wide Web: Usability Concerns, User Preferences, and "Browsing Behavior."

Science.gov (United States)

Frick, Theodore; Monson, John A.; Xaver, Richard F.; Kilic, Gulsen; Conley, Aaron T.; Wamey, Beatrice

There are several approaches a World Wide Web site designer considers in developing a menu structure. One consideration is the content of the menus (what choices are available to the user). Another consideration is the physical layout of the menu structure. The physical layout of a menu may be described as being one of at least three different…

A World Wide Web Human Dimensions Framework and Database for Wildlife and Forest Planning

Science.gov (United States)

Michael A. Tarrant; Alan D. Bright; H. Ken Cordell

1999-01-01

The paper describes a human dimensions framework(HDF) for application in wildlife and forest planning. The HDF is delivered via the world wide web and retrieves data on-line from the Social, Economic, Environmental, Leisure, and Attitudes (SEELA) database. The proposed HDF is guided by ten fundamental HD principles, and is applied to wildlife and forest planning using...

Scalable, full-colour and controllable chromotropic plasmonic printing

OpenAIRE

Xue, Jiancai; Zhou, Zhang-Kai; Wei, Zhiqiang; Su, Rongbin; Lai, Juan; Li, Juntao; Li, Chao; Zhang, Tengwei; Wang, Xue-Hua

2015-01-01

Plasmonic colour printing has drawn wide attention as a promising candidate for the next-generation colour-printing technology. However, an efficient approach to realize full colour and scalable fabrication is still lacking, which prevents plasmonic colour printing from practical applications. Here we present a scalable and full-colour plasmonic printing approach by combining conjugate twin-phase modulation with a plasmonic broadband absorber. More importantly, our approach also demonstrates ...

Rendimiento de los sistemas de recuperación en la world wide web: revisión metodológica.

Directory of Open Access Journals (Sweden)

Olvera Lobo, María Dolores

2000-03-01

Full Text Available This study is an attempt to establish a methodology for the evaluation of information retrieval with search engines in the World Wide Web. The method, which is explained in detail, adapts traditional techniques for evaluating web peculiarities and makes use of precision and recall scores, based on the relevance of the first 20 results retrieved. This method has been successfully applied to the evaluation of ten different search engines.

Este estudio pretende contribuir a establecer una metodología para la evaluación de la recuperación de información de las herramientas de búsqueda en el entorno de la World Wide Web. Se detalla el método diseñado (y aplicado con éxito, para evaluar los resultados de las búsquedas, adaptando las técnicas tradicionales de evaluación a las particularidades de la Web y empleando las medidas de la precisión y exhaustividad, basadas en la relevancia, para los 20 primeros resultados recuperados.

An Image Retrieval and Processing Expert System for the World Wide Web

Science.gov (United States)

Rodriguez, Ricardo; Rondon, Angelica; Bruno, Maria I.; Vasquez, Ramon

1998-01-01

This paper presents a system that is being developed in the Laboratory of Applied Remote Sensing and Image Processing at the University of P.R. at Mayaguez. It describes the components that constitute its architecture. The main elements are: a Data Warehouse, an Image Processing Engine, and an Expert System. Together, they provide a complete solution to researchers from different fields that make use of images in their investigations. Also, since it is available to the World Wide Web, it provides remote access and processing of images.

From theater to the world wide web--a new online era for surgical education.

Science.gov (United States)

O'Leary, D Peter; Corrigan, Mark A; McHugh, Seamus M; Hill, A D; Redmond, H Paul

2012-01-01

Traditionally, surgical education has been confined to operating and lecture theaters. Access to the World Wide Web and services, such as YouTube and iTunes has expanded enormously. Each week throughout Ireland, nonconsultant hospital doctors work hard to create presentations for surgical teaching. Once presented, these valuable presentations are often never used again. We aimed to compile surgical presentations online and establish a new online surgical education tool. We also sought to measure the effect of this educational tool on surgical presentation quality. Surgical presentations from Cork University Hospital and Beaumont Hospital presented between January 2010 and April 2011 were uploaded to http://www.pilgrimshospital.com/presentations. A YouTube channel and iTunes application were created. Web site hits were monitored. Quality of presentations was assessed by 4 independent senior surgical judges using a validated PowerPoint assessment form. Judges were randomly given 6 presentations; 3 presentations were pre-web site setup and 3 were post-web site setup. Once uploading commenced, presenters were informed. A total of 89 presentations have been uploaded to date. This includes 55 cases, 17 journal club, and 17 short bullet presentations. This has been associated with 46,037 web site page views. Establishment of the web site was associated with a significant improvement in the quality of presentations. Mean scores for pre- and post-web site group were 6.2 vs 7.7 out of 9 respectively, p = 0.037. This novel educational tool provides a unique method to enable surgical education become more accessible to trainees, while also improving the overall quality of surgical teaching PowerPoint presentations. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Validity and client use of information from the World Wide Web regarding veterinary anesthesia in dogs.

Science.gov (United States)

Hofmeister, Erik H; Watson, Victoria; Snyder, Lindsey B C; Love, Emma J

2008-12-15

To determine the validity of the information on the World Wide Web concerning veterinary anesthesia in dogs and to determine the methods dog owners use to obtain that information. Web-based search and client survey. 73 Web sites and 92 clients. Web sites were scored on a 5-point scale for completeness and accuracy of information about veterinary anesthesia by 3 board-certified anesthesiologists. A search for anesthetic information regarding 49 specific breeds of dogs was also performed. A survey was distributed to the clients who visited the University of Georgia Veterinary Teaching Hospital during a 4-month period to solicit data about sources used by clients to obtain veterinary medical information and the manner in which information obtained from Web sites was used. The general search identified 73 Web sites that included information on veterinary anesthesia; these sites received a mean score of 3.4 for accuracy and 2.5 for completeness. Of 178 Web sites identified through the breed-specific search, 57 (32%) indicated that a particular breed was sensitive to anesthesia. Of 83 usable, completed surveys, 72 (87%) indicated the client used the Web for veterinary medical information. Fifteen clients (18%) indicated they believed their animal was sensitive to anesthesia because of its breed. Information available on the internet regarding anesthesia in dogs is generally not complete and may be misleading with respect to risks to specific breeds. Consequently, veterinarians should appropriately educate clients regarding anesthetic risk to their particular dog.

Use of the World Wide Web in Lower-Division Chemistry Courses

Science.gov (United States)

Stevens, Karen E.; Stevens, Richard E.

1996-10-01

Recent articles have identified the plethora of chemical information existing currently on the World-Wide Web (WWW) available via the Internet (1). This information medium is particularly valuable because it represents a very up-to-date source of information. Site managers can update information and it can be "instantaneously visited" by someone. As an example, several current topics of chemical significance were highlighted in a nonmajor chemistry class held in January 1996 at our college. December 31, 1995, represented the last day that leaded gasoline could be sold for use in automobiles. In early January, the FDA approved the synthetic fat olestra for use in snack foods. Both of these topics provoked great interest in students as they brought up issues of relevance and interest to their lives that were currently being discussed in the news. The WWW was utilized extensively as a source of information and current updates. Print media, such as texts and reference manuals, have a much longer "lag-time" before current information can be typeset, printed, and accessed by a researcher. Previous articles (1, 2) have focused on Internet use for upper-division classes, but we have found a useful way to bring the Internet into nonmajor and freshman level classes composed of 20-50 students. The student assignment was to find information on a chemical topic currently in the news by using the WWW and use that information to write a 2-3 page essay (3, 4). Using the Internet to find information presents one issue not previously encountered when using encyclopedias, reference books, or textbooks, but an issue raised in previous editorials in this Journal (5, 6). That difference is that virtually anyone can post information on the WWW. Thus, the WWW can have governmental organizations, environmental groups, large corporations, or just individuals posting their views. Hence, when searching a particular topic, students might find a very factual article, or they might find a very

The readability of pediatric patient education materials on the World Wide Web.

Science.gov (United States)

D'Alessandro, D M; Kingsley, P; Johnson-West, J

2001-07-01

Literacy is a national and international problem. Studies have shown the readability of adult and pediatric patient education materials to be too high for average adults. Materials should be written at the 8th-grade level or lower. To determine the general readability of pediatric patient education materials designed for adults on the World Wide Web (WWW). GeneralPediatrics.com (http://www.generalpediatrics.com) is a digital library serving the medical information needs of pediatric health care providers, patients, and families. Documents from 100 different authoritative Web sites designed for laypersons were evaluated using a built-in computer software readability formula (Flesch Reading Ease and Flesch-Kincaid reading levels) and hand calculation methods (Fry Formula and SMOG methods). Analysis of variance and paired t tests determined significance. Eighty-nine documents constituted the final sample; they covered a wide spectrum of pediatric topics. The overall Flesch Reading Ease score was 57.0. The overall mean Fry Formula was 12.0 (12th grade, 0 months of schooling) and SMOG was 12.2. The overall Flesch-Kincaid grade level was significantly lower (Peducation materials on the WWW are not written at an appropriate reading level for the average adult. We propose that a practical reading level and how it was determined be included on all patient education materials on the WWW for general guidance in material selection. We discuss suggestions for improved readability of patient education materials.

World wide web implementation of the Langley technical report server

Science.gov (United States)

Nelson, Michael L.; Gottlich, Gretchen L.; Bianco, David J.

1994-01-01

On January 14, 1993, NASA Langley Research Center (LaRC) made approximately 130 formal, 'unclassified, unlimited' technical reports available via the anonymous FTP Langley Technical Report Server (LTRS). LaRC was the first organization to provide a significant number of aerospace technical reports for open electronic dissemination. LTRS has been successful in its first 18 months of operation, with over 11,000 reports distributed and has helped lay the foundation for electronic document distribution for NASA. The availability of World Wide Web (WWW) technology has revolutionized the Internet-based information community. This paper describes the transition of LTRS from a centralized FTP site to a distributed data model using the WWW, and suggests how the general model for LTRS can be applied to other similar systems.

Developing as new search engine and browser for libraries to search and organize the World Wide Web library resources

OpenAIRE

Sreenivasulu, V.

2000-01-01

Internet Granthalaya urges world wide advocates and targets at the task of creating a new search engine and dedicated browseer. Internet Granthalaya may be the ultimate search engine exclusively dedicated for every library use to search and organize the world wide web libary resources

Traitor: associating concepts using the world wide web

NARCIS (Netherlands)

Drijfhout, Wanno; Oliver, J.; Oliver, Jundt; Wevers, L.; Hiemstra, Djoerd

We use Common Crawl's 25TB data set of web pages to construct a database of associated concepts using Hadoop. The database can be queried through a web application with two query interfaces. A textual interface allows searching for similarities and differences between multiple concepts using a query

Finding Emotional-Laden Resources on the World Wide Web

Directory of Open Access Journals (Sweden)

Diane Rasmussen Neal

2011-03-01

Full Text Available Some content in multimedia resources can depict or evoke certain emotions in users. The aim of Emotional Information Retrieval (EmIR and of our research is to identify knowledge about emotional-laden documents and to use these findings in a new kind of World Wide Web information service that allows users to search and browse by emotion. Our prototype, called Media EMOtion SEarch (MEMOSE, is largely based on the results of research regarding emotive music pieces, images and videos. In order to index both evoked and depicted emotions in these three media types and to make them searchable, we work with a controlled vocabulary, slide controls to adjust the emotions’ intensities, and broad folksonomies to identify and separate the correct resource-specific emotions. This separation of so-called power tags is based on a tag distribution which follows either an inverse power law (only one emotion was recognized or an inverse-logistical shape (two or three emotions were recognized. Both distributions are well known in information science. MEMOSE consists of a tool for tagging basic emotions with the help of slide controls, a processing device to separate power tags, a retrieval component consisting of a search interface (for any topic in combination with one or more emotions and a results screen. The latter shows two separately ranked lists of items for each media type (depicted and felt emotions, displaying thumbnails of resources, ranked by the mean values of intensity. In the evaluation of the MEMOSE prototype, study participants described our EmIR system as an enjoyable Web 2.0 service.

Enhancing Student Performance in First-Semester General Chemistry Using Active Feedback through the World Wide Web

Science.gov (United States)

Chambers, Kent A.; Blake, Bob

2007-01-01

The World Wide Web recently launched a new interactive feedback system for the instructors, so that can better understanding about their students and their problems. The feedback, in combination with tailored lectures is expected to enhance student performance in the first semester of general chemistry.

Thermal Characteristics of Plastic Film Tension in Roll-to-Roll Gravure Printed Electronics

Directory of Open Access Journals (Sweden)

Kui He

2018-02-01

Full Text Available In the printing section of a roll-to-roll gravure printed electronics machine, the plastic film tension is directly associated with the product quality. The temperature distribution of the plastic film in the printing section is non-uniform, because of the higher drying temperature and the lower room temperature. Furthermore, the drying temperature and the room temperature are not constants in industrial production. As the plastic film is sensitive to temperature, the temperature of the plastic film will affects the web tension in the printing section. In this paper, the thermal characteristics of the plastic film tension in roll-to-roll gravure printed electronics are studied in order to help to improve the product quality. First, the tension model including the factor of temperature is derived based on the law of mass conservation. Then, some simulations and experiments are carried out in order to in-depth research the effects of the drying temperature and room temperature based on the relations between system inputs and outputs. The results show that the drying temperature and room temperature have significant influences on the web tension. The research on the thermal characteristics of plastic film tension would benefit the tension control accuracy for further study.

Scalable, full-colour and controllable chromotropic plasmonic printing

Science.gov (United States)

Xue, Jiancai; Zhou, Zhang-Kai; Wei, Zhiqiang; Su, Rongbin; Lai, Juan; Li, Juntao; Li, Chao; Zhang, Tengwei; Wang, Xue-Hua

2015-01-01

Plasmonic colour printing has drawn wide attention as a promising candidate for the next-generation colour-printing technology. However, an efficient approach to realize full colour and scalable fabrication is still lacking, which prevents plasmonic colour printing from practical applications. Here we present a scalable and full-colour plasmonic printing approach by combining conjugate twin-phase modulation with a plasmonic broadband absorber. More importantly, our approach also demonstrates controllable chromotropic capability, that is, the ability of reversible colour transformations. This chromotropic capability affords enormous potentials in building functionalized prints for anticounterfeiting, special label, and high-density data encryption storage. With such excellent performances in functional colour applications, this colour-printing approach could pave the way for plasmonic colour printing in real-world commercial utilization. PMID:26567803

Development of a world wide web-based interactive education program to improve detectability of pulmonary nodules on chest radiographs

International Nuclear Information System (INIS)

Ohm, Joon Young; Kim, Jin Hwan; Kim, Sung Soo; Han, Ki Tae; Ahn, Young Seob; Shin, Byung Seok; Bae, Kyongtae T.

2007-01-01

To design and develop a World Wide Web-based education program that will allow trainees to interactively learn and improve the diagnostic capability of detecting pulmonary nodules on chest radiographs. Chest radiographs with known diagnosis were retrieved and selected from our institutional clinical archives. A database was constructed by sorting radiographs into three groups: normal, nodule, and false positive (i.e., nodule-like focal opacity). Each nodule was assigned with the degree of detectability: easy, intermediate, difficult, and likely missed. Nodules were characterized by their morphology (well-defined, ill-defined, irregular, faint) and by other associated pathologies or potentially obscuring structures. The Web site was organized into four sections: study, test, record and information. The Web site allowed a user interactively to undergo the training section appropriate to the user's diagnostic capability. The training was enhanced by means of clinical and other pertinent radiological findings included in the database. The outcome of the training was tested with clinical test radiographs that presented nodules or false positives with varying diagnostic difficulties. A World Wide Web-based education program is a promising technique that would allow trainees to interactively learn and improve the diagnostic capability of detecting and characterizing pulmonary nodules

Use of World Wide Web-based directories for tracing subjects in epidemiologic studies.

Science.gov (United States)

Koo, M M; Rohan, T E

2000-11-01

The recent availability of World Wide Web-based directories has opened up a new approach for tracing subjects in epidemiologic studies. The completeness of two World Wide Web-based directories (Canada411 and InfoSpace Canada) for subject tracing was evaluated by using a randomized crossover design for 346 adults randomly selected from respondents in an ongoing cohort study. About half (56.4%) of the subjects were successfully located by using either Canada411 or InfoSpace. Of the 43.6% of the subjects who could not be located using either directory, the majority (73.5%) were female. Overall, there was no clear advantage of one directory over the other. Although Canada411 could find significantly more subjects than InfoSpace, the number of potential matches returned by Canada411 was also higher, which meant that a longer list of potential matches had to be examined before a true match could be found. One strategy to minimize the number of potential matches per true match is to first search by InfoSpace with the last name and first name, then by Canada411 with the last name and first name, and finally by InfoSpace with the last name and first initial. Internet-based searches represent a potentially useful approach to tracing subjects in epidemiologic studies.

Using Open Web APIs in Teaching Web Mining

Science.gov (United States)

Chen, Hsinchun; Li, Xin; Chau, M.; Ho, Yi-Jen; Tseng, Chunju

2009-01-01

With the advent of the World Wide Web, many business applications that utilize data mining and text mining techniques to extract useful business information on the Web have evolved from Web searching to Web mining. It is important for students to acquire knowledge and hands-on experience in Web mining during their education in information systems…

Inkjet-printed silver tracks on different paper substrates

CSIR Research Space (South Africa)

Joubert, T-H

2015-08-01

Full Text Available Inkjet printing is a widely used patterning method in industrial and scientific applications, and has also drawn attention in the field of printed electronics in recent years [1]. In this work, conductive silver tracks were achieved by inkjet...

Numerical simulation of evaporation and absorption of inkjet printed droplets

NARCIS (Netherlands)

Siregar, D.P.

2012-01-01

Inkjet printing is an important field of research for many industrial applications. In particular, the inkjet-printing technology is widely used in the production of a text or graphics of documents stored in electronic form by printing ink on papers and the manufacturing of microarray slides by

Migrating the facility profile information management system into the world wide web

Energy Technology Data Exchange (ETDEWEB)

Kero, R.E.; Swietlik, C.E.

1994-09-01

The Department of Energy - Office of Special Projects and Argonne National Laboratory (ANL), along with the Department of Energy - office of Scientific and Technical Information have previously designed and implemented the Environment, Safety and Health Facility Profile Information Management System (FPIMS) to facilitate greater efficiency in searching, analyzing and disseminating information found within environment, safety and health oversight documents. This information retrieval based system serves as a central repository for full-text electronic oversight documents, as well as a management planning and decision making tool that can assist in trend and root cause analyses. Continuous improvement of environment, safety and health programs are currently aided through this personal computer-based system by providing a means for the open communication of lessons learned across the department. Overall benefits have included reductions in costs and improvements in past information management capabilities. Access to the FPIMS has been possible historically through a headquarters-based local area network equipped with modems. Continued demand for greater accessibility of the system by remote DOE field offices and sites, in conjunction with the Secretary of Energy` s call for greater public accessibility to Department of Energy (DOE) information resources, has been the impetus to expand access through the use of Internet technologies. Therefore, the following paper will discuss reasons for migrating the FPIMS system into the World Wide Web (Web), various lessons learned from the FPIMS migration effort, as well as future plans for enhancing the Web-based FPIMS.

World Wide Web Metaphors for Search Mission Data

Science.gov (United States)

Norris, Jeffrey S.; Wallick, Michael N.; Joswig, Joseph C.; Powell, Mark W.; Torres, Recaredo J.; Mittman, David S.; Abramyan, Lucy; Crockett, Thomas M.; Shams, Khawaja S.; Fox, Jason M.;

Current and emerging applications of 3D printing in medicine.

Science.gov (United States)

Liaw, Chya-Yan; Guvendiren, Murat

2017-06-07

Three-dimensional (3D) printing enables the production of anatomically matched and patient-specific devices and constructs with high tunability and complexity. It also allows on-demand fabrication with high productivity in a cost-effective manner. As a result, 3D printing has become a leading manufacturing technique in healthcare and medicine for a wide range of applications including dentistry, tissue engineering and regenerative medicine, engineered tissue models, medical devices, anatomical models and drug formulation. Today, 3D printing is widely adopted by the healthcare industry and academia. It provides commercially available medical products and a platform for emerging research areas including tissue and organ printing. In this review, our goal is to discuss the current and emerging applications of 3D printing in medicine. A brief summary on additive manufacturing technologies and available printable materials is also given. The technological and regulatory barriers that are slowing down the full implementation of 3D printing in the medical field are also discussed.

Using the World-Wide Web to Facilitate Communications of Non-Destructive Evaluation

Science.gov (United States)

McBurney, Sean

1995-01-01

The high reliability required for Aeronautical components is a major reason for extensive Nondestructive Testing and Evaluation. Here at Langley Research Center (LaRC), there are highly trained and certified personal to conduct such testing to prevent hazards from occurring in the workplace and on the research projects for the National Aeronautics and Space Administration (NASA). The purpose of my studies was to develop a communication source to educate others of the services and equipment offered here. This was accomplished by creating documents that are accessible to all in the industry via the World Wide Web.

User Interface on the World Wide Web: How to Implement a Multi-Level Program Online

Science.gov (United States)

Cranford, Jonathan W.

1995-01-01

The objective of this Langley Aerospace Research Summer Scholars (LARSS) research project was to write a user interface that utilizes current World Wide Web (WWW) technologies for an existing computer program written in C, entitled LaRCRisk. The project entailed researching data presentation and script execution on the WWW and than writing input/output procedures for the database management portion of LaRCRisk.

Creation and utilization of a World Wide Web based space radiation effects code: SIREST

Science.gov (United States)

Singleterry, R. C. Jr; Wilson, J. W.; Shinn, J. L.; Tripathi, R. K.; Thibeault, S. A.; Noor, A. K.; Cucinotta, F. A.; Badavi, F. F.; Chang, C. K.; Qualls, G. D.;

Reprocessable thermosets for sustainable three-dimensional printing.

Science.gov (United States)

Zhang, Biao; Kowsari, Kavin; Serjouei, Ahmad; Dunn, Martin L; Ge, Qi

2018-05-08

Among all three-dimensional (3D) printing materials, thermosetting photopolymers claim almost half of the market, and have been widely used in various fields owing to their superior mechanical stability at high temperatures, excellent chemical resistance as well as good compatibility with high-resolution 3D printing technologies. However, once these thermosetting photopolymers form 3D parts through photopolymerization, the covalent networks are permanent and cannot be reprocessed, i.e., reshaped, repaired, or recycled. Here, we report a two-step polymerization strategy to develop 3D printing reprocessable thermosets (3DPRTs) that allow users to reform a printed 3D structure into a new arbitrary shape, repair a broken part by simply 3D printing new material on the damaged site, and recycle unwanted printed parts so the material can be reused for other applications. These 3DPRTs provide a practical solution to address environmental challenges associated with the rapid increase in consumption of 3D printing materials.

Printed MIMO antenna engineering

CERN Document Server

Sharawi, Mohammad S

2014-01-01

Wireless communications has made a huge leap during the past two decades. The multiple-input-multiple-output (MIMO) technology was proposed in the 1990's as a viable solution that can overcome the data rate limit experienced by single-input-single-output (SISO) systems. This resource is focused on printed MIMO antenna system design. Printed antennas are widely used in mobile and handheld terminals due to their conformity with the device, low cost, good integration within the device elements and mechanical parts, as well as ease of fabrication.A perfect design companion for practicing engineers

ePlant and the 3D data display initiative: integrative systems biology on the world wide web.

Science.gov (United States)

Fucile, Geoffrey; Di Biase, David; Nahal, Hardeep; La, Garon; Khodabandeh, Shokoufeh; Chen, Yani; Easley, Kante; Christendat, Dinesh; Kelley, Lawrence; Provart, Nicholas J

2011-01-10

Visualization tools for biological data are often limited in their ability to interactively integrate data at multiple scales. These computational tools are also typically limited by two-dimensional displays and programmatic implementations that require separate configurations for each of the user's computing devices and recompilation for functional expansion. Towards overcoming these limitations we have developed "ePlant" (http://bar.utoronto.ca/eplant) - a suite of open-source world wide web-based tools for the visualization of large-scale data sets from the model organism Arabidopsis thaliana. These tools display data spanning multiple biological scales on interactive three-dimensional models. Currently, ePlant consists of the following modules: a sequence conservation explorer that includes homology relationships and single nucleotide polymorphism data, a protein structure model explorer, a molecular interaction network explorer, a gene product subcellular localization explorer, and a gene expression pattern explorer. The ePlant's protein structure explorer module represents experimentally determined and theoretical structures covering >70% of the Arabidopsis proteome. The ePlant framework is accessed entirely through a web browser, and is therefore platform-independent. It can be applied to any model organism. To facilitate the development of three-dimensional displays of biological data on the world wide web we have established the "3D Data Display Initiative" (http://3ddi.org).

Print Media Objectivity and Advertising Revenue: An Appraisal ...

African Journals Online (AJOL)

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

OrthoVenn: a web server for genome wide comparison and annotation of orthologous clusters across multiple species

Science.gov (United States)

Genome wide analysis of orthologous clusters is an important component of comparative genomics studies. Identifying the overlap among orthologous clusters can enable us to elucidate the function and evolution of proteins across multiple species. Here, we report a web platform named OrthoVenn that i...

07051 Executive Summary -- Programming Paradigms for the Web: Web Programming and Web Services

OpenAIRE

Hull, Richard; Thiemann, Peter; Wadler, Philip

2007-01-01

The world-wide web raises a variety of new programming challenges. To name a few: programming at the level of the web browser, data-centric approaches, and attempts to automatically discover and compose web services. This seminar brought together researchers from the web programming and web services communities and strove to engage them in communication with each other. The seminar was held in an unusual style, in a mixture of short presentations and in-depth discussio...

Health and medication information resources on the World Wide Web.

Science.gov (United States)

Grossman, Sara; Zerilli, Tina

2013-04-01

Health care practitioners have increasingly used the Internet to obtain health and medication information. The vast number of Internet Web sites providing such information and concerns with their reliability makes it essential for users to carefully select and evaluate Web sites prior to use. To this end, this article reviews the general principles to consider in this process. Moreover, as cost may limit access to subscription-based health and medication information resources with established reputability, freely accessible online resources that may serve as an invaluable addition to one's reference collection are highlighted. These include government- and organization-sponsored resources (eg, US Food and Drug Administration Web site and the American Society of Health-System Pharmacists' Drug Shortage Resource Center Web site, respectively) as well as commercial Web sites (eg, Medscape, Google Scholar). Familiarity with such online resources can assist health care professionals in their ability to efficiently navigate the Web and may potentially expedite the information gathering and decision-making process, thereby improving patient care.

Empirical studies assessing the quality of health information for consumers on the world wide web: a systematic review.

Science.gov (United States)

Eysenbach, Gunther; Powell, John; Kuss, Oliver; Sa, Eun-Ryoung

The quality of consumer health information on the World Wide Web is an important issue for medicine, but to date no systematic and comprehensive synthesis of the methods and evidence has been performed. To establish a methodological framework on how quality on the Web is evaluated in practice, to determine the heterogeneity of the results and conclusions, and to compare the methodological rigor of these studies, to determine to what extent the conclusions depend on the methodology used, and to suggest future directions for research. We searched MEDLINE and PREMEDLINE (1966 through September 2001), Science Citation Index (1997 through September 2001), Social Sciences Citation Index (1997 through September 2001), Arts and Humanities Citation Index (1997 through September 2001), LISA (1969 through July 2001), CINAHL (1982 through July 2001), PsychINFO (1988 through September 2001), EMBASE (1988 through June 2001), and SIGLE (1980 through June 2001). We also conducted hand searches, general Internet searches, and a personal bibliographic database search. We included published and unpublished empirical studies in any language in which investigators searched the Web systematically for specific health information, evaluated the quality of Web sites or pages, and reported quantitative results. We screened 7830 citations and retrieved 170 potentially eligible full articles. A total of 79 distinct studies met the inclusion criteria, evaluating 5941 health Web sites and 1329 Web pages, and reporting 408 evaluation results for 86 different quality criteria. Two reviewers independently extracted study characteristics, medical domains, search strategies used, methods and criteria of quality assessment, results (percentage of sites or pages rated as inadequate pertaining to a quality criterion), and quality and rigor of study methods and reporting. Most frequently used quality criteria used include accuracy, completeness, readability, design, disclosures, and references provided

Designing Biomaterials for 3D Printing.

Science.gov (United States)

Guvendiren, Murat; Molde, Joseph; Soares, Rosane M D; Kohn, Joachim

2016-10-10

Three-dimensional (3D) printing is becoming an increasingly common technique to fabricate scaffolds and devices for tissue engineering applications. This is due to the potential of 3D printing to provide patient-specific designs, high structural complexity, rapid on-demand fabrication at a low-cost. One of the major bottlenecks that limits the widespread acceptance of 3D printing in biomanufacturing is the lack of diversity in "biomaterial inks". Printability of a biomaterial is determined by the printing technique. Although a wide range of biomaterial inks including polymers, ceramics, hydrogels and composites have been developed, the field is still struggling with processing of these materials into self-supporting devices with tunable mechanics, degradation, and bioactivity. This review aims to highlight the past and recent advances in biomaterial ink development and design considerations moving forward. A brief overview of 3D printing technologies focusing on ink design parameters is also included.

Architecture for biomedical multimedia information delivery on the World Wide Web

Science.gov (United States)

Long, L. Rodney; Goh, Gin-Hua; Neve, Leif; Thoma, George R.

1997-10-01

Research engineers at the National Library of Medicine are building a prototype system for the delivery of multimedia biomedical information on the World Wide Web. This paper discuses the architecture and design considerations for the system, which will be used initially to make images and text from the third National Health and Nutrition Examination Survey (NHANES) publicly available. We categorized our analysis as follows: (1) fundamental software tools: we analyzed trade-offs among use of conventional HTML/CGI, X Window Broadway, and Java; (2) image delivery: we examined the use of unconventional TCP transmission methods; (3) database manager and database design: we discuss the capabilities and planned use of the Informix object-relational database manager and the planned schema for the HNANES database; (4) storage requirements for our Sun server; (5) user interface considerations; (6) the compatibility of the system with other standard research and analysis tools; (7) image display: we discuss considerations for consistent image display for end users. Finally, we discuss the scalability of the system in terms of incorporating larger or more databases of similar data, and the extendibility of the system for supporting content-based retrieval of biomedical images. The system prototype is called the Web-based Medical Information Retrieval System. An early version was built as a Java applet and tested on Unix, PC, and Macintosh platforms. This prototype used the MiniSQL database manager to do text queries on a small database of records of participants in the second NHANES survey. The full records and associated x-ray images were retrievable and displayable on a standard Web browser. A second version has now been built, also a Java applet, using the MySQL database manager.

Distributed nuclear medicine applications using World Wide Web and Java technology

International Nuclear Information System (INIS)

Knoll, P.; Hoell, K.; Koriska, K.; Mirzaei, S.; Koehn, H.

2000-01-01

At present, medical applications applying World Wide Web (WWW) technology are mainly used to view static images and to retrieve some information. The Java platform is a relative new way of computing, especially designed for network computing and distributed applications which enables interactive connection between user and information via the WWW. The Java 2 Software Development Kit (SDK) including Java2D API, Java Remote Method Invocation (RMI) technology, Object Serialization and the Java Advanced Imaging (JAI) extension was used to achieve a robust, platform independent and network centric solution. Medical image processing software based on this technology is presented and adequate performance capability of Java is demonstrated by an iterative reconstruction algorithm for single photon emission computerized tomography (SPECT). (orig.)

Semantic Web Requirements through Web Mining Techniques

OpenAIRE

Hassanzadeh, Hamed; Keyvanpour, Mohammad Reza

2012-01-01

In recent years, Semantic web has become a topic of active research in several fields of computer science and has applied in a wide range of domains such as bioinformatics, life sciences, and knowledge management. The two fast-developing research areas semantic web and web mining can complement each other and their different techniques can be used jointly or separately to solve the issues in both areas. In addition, since shifting from current web to semantic web mainly depends on the enhance...

Der Wandel in der Benutzung des World Wide Webs

NARCIS (Netherlands)

Weinreich, H.; Heinecke, A.; Obendorf, H.; Paul, H.; Mayer, M.; Herder, E.

2006-01-01

Dieser Beitrag präsentiert ausgewählte Ergebnisse einer Langzeitstudie mit 25 Teilnehmern zur Benutzung des Webs. Eine Gegenüberstellung mit den Ergebnissen der letzten vergleichbaren Studien offenbart eine deutliche Veränderung im Navigationsverhalten der Nutzer. Neue Angebote und Dienste des Webs

3D-printed upper limb prostheses: a review.

Science.gov (United States)

Ten Kate, Jelle; Smit, Gerwin; Breedveld, Paul

2017-04-01

This paper aims to provide an overview with quantitative information of existing 3D-printed upper limb prostheses. We will identify the benefits and drawbacks of 3D-printed devices to enable improvement of current devices based on the demands of prostheses users. A review was performed using Scopus, Web of Science and websites related to 3D-printing. Quantitative information on the mechanical and kinematic specifications and 3D-printing technology used was extracted from the papers and websites. The overview (58 devices) provides the general specifications, the mechanical and kinematic specifications of the devices and information regarding the 3D-printing technology used for hands. The overview shows prostheses for all different upper limb amputation levels with different types of control and a maximum material cost of $500. A large range of various prostheses have been 3D-printed, of which the majority are used by children. Evidence with respect to the user acceptance, functionality and durability of the 3D-printed hands is lacking. Contrary to what is often claimed, 3D-printing is not necessarily cheap, e.g., injection moulding can be cheaper. Conversely, 3D-printing provides a promising possibility for individualization, e.g., personalized socket, colour, shape and size, without the need for adjusting the production machine. Implications for rehabilitation Upper limb deficiency is a condition in which a part of the upper limb is missing as a result of a congenital limb deficiency of as a result of an amputation. A prosthetic hand can restore some of the functions of a missing limb and help the user in performing activities of daily living. Using 3D-printing technology is one of the solutions to manufacture hand prostheses. This overview provides information about the general, mechanical and kinematic specifications of all the devices and it provides the information about the 3D-printing technology used to print the hands.

Printing in heterogeneous computer environment at DESY

International Nuclear Information System (INIS)

Jakubowski, Z.

1996-01-01

The number of registered hosts DESY reaches 3500 while the number of print queues approaches 150. The spectrum of used computing environment is very wide: from MAC's and PC's, through SUN, DEC and SGI machines to the IBM mainframe. In 1994 we used 18 tons of paper. We present a solution for providing print services in such an environment for more than 3500 registered users. The availability of the print service is a serious issue. Using centralized printing has a lot of advantages for software administration but creates single point of failure. We solved this problem partially without using expensive software and hardware. The talk provides information about the DESY central central print spooler concept. None of the systems available on the market provides ready to use reliable solution for all platforms used for DESY. We discuss concepts for installation, administration and monitoring large number of printers. We found a solution for printing both on central computing facilities likewise for support of stand-alone workstations. (author)

Treatment of Wide-Neck Bifurcation Aneurysm Using "WEB Device Waffle Cone Technique".

Science.gov (United States)

Mihalea, Cristian; Caroff, Jildaz; Rouchaud, Aymeric; Pescariu, Sorin; Moret, Jacques; Spelle, Laurent

2018-05-01

The endovascular treatment of wide-neck bifurcation aneurysms can be challenging and often requires the use of adjunctive techniques and devices. We report our first experience of using a waffle-cone technique adapted to the Woven Endoluminal Bridge (WEB) device in a large-neck basilar tip aneurysm, suitable in cases where the use of Y stenting or other techniques is limited due to anatomic restrictions. The procedure was complete, and angiographic occlusion of the aneurysm was achieved 24 hours post treatment, as confirmed by digital subtraction angiography. No complications occurred. The case reported here was not suitable for Y stenting or deployment of the WEB device alone, due to the small caliber of both posterior cerebral arteries and their origin at the neck level. The main advantage of this technique is that both devices have a controlled detachment system and are fully independent. To our knowledge, this technique has not been reported previously and this modality of treatment has never been described in the literature. Copyright © 2018 Elsevier Inc. All rights reserved.

Topography printing to locally control wettability.

Science.gov (United States)

Zheng, Zijian; Azzaroni, Omar; Zhou, Feng; Huck, Wilhelm T S

2006-06-21

This paper reports a new patterning method, which utilizes NaOH to facilitate the irreversible binding between the PDMS stamp and substrates and subsequent cohesive mechanical failure to transfer the PDMS patterns. Our method shows high substrate tolerance and can be used to "print" various PDMS geometries on a wide range of surfaces, including Si100, glass, gold, polymers, and patterned SU8 photoresist. Using this technique, we are able to locally change the wettability of substrate surfaces by printing well-defined PDMS architectures on the patterned SU8 photoresist. It is possible to generate differential wetting and dewetting properties in microchannels and in the PDMS printed area, respectively.

Weather resistance of inkjet prints on plastic substrates

Directory of Open Access Journals (Sweden)

Rozália Szentgyörgyvölgyi

2015-06-01

Full Text Available The development of wide format inkjet printers made the technology available for large area commercials. Outdoor advertising uses a wide range of substrate including paperboard, vinyl, canvas, mesh; the material of the substrate itself has to endure the physical and chemical effects of local weather. Weather elements (humidity, wind, solar irradiation degrade printed products inevitably; plastic products have better resistance against them, than paper based substrates. Service life of the printed product for outdoor application is a key parameter from the customer’s point of view. There are two ways to estimate expected lifetime: on site outdoor testing or laboratory testing. In both cases weathering parameters can be monitored, however laboratory testing devices may produce the desired environmental effects and thus accelerate the aging process. Our research objective was to evaluate the effects of artificial weathering on prints produced by inkjet technology on plastic substrates. We used a large format CMYK inkjet printer (Mutoh Rockhopper II, with Epson DX 4 print heads to print our test chart on two similar substrates (PVC coated tarpaulins with grammages 400 g/m2 and 440 g/m2. Specimen were aged in an Atlas Suntest XLS+ material tester device for equal time intervals. We measured and calculated the gradual changes of the optical properties (optical density, tone value, colour shifts of the test prints.

Image once, print thrice? Three-dimensional printing of replacement parts.

Science.gov (United States)

Rankin, Timothy M; Wormer, Blair A; Miller, John D; Giovinco, Nicholas A; Al Kassis, Salam; Armstrong, David G

2018-02-01

The last 20 years has seen an exponential increase in 3D printing as it pertains to the medical industry and more specifically surgery. Previous reviews in this domain have chosen to focus on applications within a specific field. To our knowledge, none have evaluated the broad applications of patient-specific or digital imaging and communications in medicine (DICOM) derived applications of this technology. We searched PUBMED and CINAHL from April 2012 to April 2017. 261 studies fulfilled the inclusion criteria. Proportions of articles reviewed: DICOM (5%), CT (38%), MRI (20%), Ultrasonography (28%), and Bio-printing (9%). There is level IV evidence to support the use of 3D printing for education, pre-operative planning, simulation and implantation. In order to make this technology widely applicable, it will require automation of DICOM to standard tessellation language to implant. Advances in knowledge: Recent lapses in intellectual property and greater familiarity with rapid prototyping in medicine has set the stage for the next generation of custom implants, simulators and autografts. Radiologists may be able to help establish reimbursable procedural terminology.

Development of web-based computer-tailored advice to promote physical activity among people older than 50 years.

Science.gov (United States)

Peels, Denise A; van Stralen, Maartje M; Bolman, Catherine; Golsteijn, Rianne Hj; de Vries, Hein; Mudde, Aart N; Lechner, Lilian

2012-03-02

The Active Plus project is a systematically developed theory- and evidence-based, computer-tailored intervention, which was found to be effective in changing physical activity behavior in people aged over 50 years. The process and effect outcomes of the first version of the Active Plus project were translated into an adapted intervention using the RE-AIM framework. The RE-AIM model is often used to evaluate the potential public health impact of an intervention and distinguishes five dimensions: reach, effectiveness, adoption, implementation, and maintenance. To gain insight into the systematic translation of the first print-delivered version of the Active Plus project into an adapted (Web-based) follow-up project. The focus of this study was on the reach and effectiveness dimensions, since these dimensions are most influenced by the results from the original Active Plus project. We optimized the potential reach and effect of the interventions by extending the delivery mode of the print-delivered intervention into an additional Web-based intervention. The interventions were adapted based on results of the process evaluation, analyses of effects within subgroups, and evaluation of the working mechanisms of the original intervention. We pretested the new intervention materials and the Web-based versions of the interventions. Subsequently, the new intervention conditions were implemented in a clustered randomized controlled trial. Adaptations resulted in four improved tailoring interventions: (1) a basic print-delivered intervention, (2) a basic Web-based intervention, (3) a print-delivered intervention with an additional environmental component, and (4) a Web-based version with an additional environmental component. Pretest results with participants showed that all new intervention materials had modest usability and relatively high appreciation, and that filling in an online questionnaire and performing the online tasks was not problematic. We used the pretest results

Use of World Wide Web Server and Browser Software To Support a First-Year Medical Physiology Course.

Science.gov (United States)

Davis, Michael J.; And Others

1997-01-01

Describes the use of a World Wide Web server to support a team-taught physiology course for first-year medical students. The students' evaluations indicate that computer use in class made lecture material more interesting, while the online documents helped reinforce lecture materials and textbooks. Lists factors which contribute to the…

Printing Values In Interactive ROOT

CERN Document Server

Perovic, Boris

2015-01-01

This project report summarizes the work I have been performing during the past twelve weeks as a Summer Student intern working on ROOT project in the SFT group, PH department, under the supervision of Axel Naumann and Danilo Piparo. One of the widely requested features for ROOT was improved interactive shell experience as well as improved printing of object values. Solving this issue was the goal of this project. Primarily, we have enabled printing of the collections. Secondly, we have unified the printing interface, making it much more robust and extendible. Thirdly, we have implemented printing of nested collections in a flexible and user-friendly manner. Finally, we have added an interactive mode, allowing for paginated output. At the beginning of the report, ROOT is presented with examples of where it is used and how important it is. Then, the motivation behind the project is elaborated, by presenting the previous state of the software package and its potential for improvement. Further, the process in wh...

Autonomous Satellite Command and Control through the World Wide Web: Phase 3

Science.gov (United States)

Cantwell, Brian; Twiggs, Robert

1998-01-01

NASA's New Millenium Program (NMP) has identified a variety of revolutionary technologies that will support orders of magnitude improvements in the capabilities of spacecraft missions. This program's Autonomy team has focused on science and engineering automation technologies. In doing so, it has established a clear development roadmap specifying the experiments and demonstrations required to mature these technologies. The primary developmental thrusts of this roadmap are in the areas of remote agents, PI/operator interface, planning/scheduling fault management, and smart execution architectures. Phases 1 and 2 of the ASSET Project (previously known as the WebSat project) have focused on establishing World Wide Web-based commanding and telemetry services as an advanced means of interfacing a spacecraft system with the PI and operators. Current automated capabilities include Web-based command submission, limited contact scheduling, command list generation and transfer to the ground station, spacecraft support for demonstrations experiments, data transfer from the ground station back to the ASSET system, data archiving, and Web-based telemetry distribution. Phase 2 was finished in December 1996. During January-December 1997 work was commenced on Phase 3 of the ASSET Project. Phase 3 is the subject of this report. This phase permitted SSDL and its project partners to expand the ASSET system in a variety of ways. These added capabilities included the advancement of ground station capabilities, the adaptation of spacecraft on-board software, and the expansion of capabilities of the ASSET management algorithms. Specific goals of Phase 3 were: (1) Extend Web-based goal-level commanding for both the payload PI and the spacecraft engineer; (2) Support prioritized handling of multiple PIs as well as associated payload experimenters; (3) Expand the number and types of experiments supported by the ASSET system and its associated spacecraft; (4) Implement more advanced resource

Web Mining

Science.gov (United States)

Fürnkranz, Johannes

The World-Wide Web provides every internet citizen with access to an abundance of information, but it becomes increasingly difficult to identify the relevant pieces of information. Research in web mining tries to address this problem by applying techniques from data mining and machine learning to Web data and documents. This chapter provides a brief overview of web mining techniques and research areas, most notably hypertext classification, wrapper induction, recommender systems and web usage mining.

3D printing: making things at the library.

Science.gov (United States)

Hoy, Matthew B

2013-01-01

3D printers are a new technology that creates physical objects from digital files. Uses for these printers include printing models, parts, and toys. 3D printers are also being developed for medical applications, including printed bone, skin, and even complete organs. Although medical printing lags behind other uses for 3D printing, it has the potential to radically change the practice of medicine over the next decade. Falling costs for hardware have made 3D printers an inexpensive technology that libraries can offer their patrons. Medical librarians will want to be familiar with this technology, as it is sure to have wide-reaching effects on the practice of medicine.

Proposed color workflow solution from mobile and website to printing

Science.gov (United States)

Qiao, Mu; Wyse, Terry

2015-03-01

With the recent introduction of mobile devices and development in client side application technologies, there is an explosion of the parameter matrix for color management: hardware platform (computer vs. mobile), operating system (Windows, Mac OS, Android, iOS), client application (Flesh, IE, Firefox, Safari, Chrome), and file format (JPEG, TIFF, PDF of various versions). In a modern digital print shop, multiple print solutions are used: digital presses, wide format inkjet, dye sublimation inkjet are used to produce a wide variety of customizable products from photo book, personalized greeting card, canvas, mobile phone case and more. In this paper, we outline a strategy spans from client side application, print file construction, to color setup on printer to manage consistency and also achieve what-you-see-is-what-you-get for customers who are using a wide variety of technologies in viewing and ordering product.

Developing Web Services for Technology Education. The Graphic Communication Electronic Publishing Project.

Science.gov (United States)

Sanders, Mark

1999-01-01

Graphic Communication Electronic Publishing Project supports a Web site (http://TechEd.vt.edu/gcc/) for graphic communication teachers and students, providing links to Web materials, conversion of print materials to electronic formats, and electronic products and services including job listings, resume posting service, and a listserv. (SK)

Taking risks on the world wide web: The impact of families and societies on adolescents' risky online behavior

NARCIS (Netherlands)

Notten, N.J.W.R.; Hof, S. van der; Berg, B. van den; Schermer, B.W.

2014-01-01

Children’s engagement in risky online behavior—such as providing personal information or agreeing to meet with a stranger—is an important predictor of whether they will encounter harmful content on the World Wide Web or be confronted with situations such as sexual harassment and privacy violations.

Real-Time Payload Control and Monitoring on the World Wide Web

Science.gov (United States)

Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1998-01-01

World Wide Web (W3) technologies such as the Hypertext Transfer Protocol (HTTP) and the Java object-oriented programming environment offer a powerful, yet relatively inexpensive, framework for distributed application software development. This paper describes the design of a real-time payload control and monitoring system that was developed with W3 technologies at NASA Ames Research Center. Based on Java Development Toolkit (JDK) 1.1, the system uses an event-driven "publish and subscribe" approach to inter-process communication and graphical user-interface construction. A C Language Integrated Production System (CLIPS) compatible inference engine provides the back-end intelligent data processing capability, while Oracle Relational Database Management System (RDBMS) provides the data management function. Preliminary evaluation shows acceptable performance for some classes of payloads, with Java's portability and multimedia support identified as the most significant benefit.

3D printing for soft robotics - a review.

Science.gov (United States)

Gul, Jahan Zeb; Sajid, Memoon; Rehman, Muhammad Muqeet; Siddiqui, Ghayas Uddin; Shah, Imran; Kim, Kyung-Hwan; Lee, Jae-Wook; Choi, Kyung Hyun

2018-01-01

Soft robots have received an increasing attention due to their advantages of high flexibility and safety for human operators but the fabrication is a challenge. Recently, 3D printing has been used as a key technology to fabricate soft robots because of high quality and printing multiple materials at the same time. Functional soft materials are particularly well suited for soft robotics due to a wide range of stimulants and sensitive demonstration of large deformations, high motion complexities and varied multi-functionalities. This review comprises a detailed survey of 3D printing in soft robotics. The development of key 3D printing technologies and new materials along with composites for soft robotic applications is investigated. A brief summary of 3D-printed soft devices suitable for medical to industrial applications is also included. The growing research on both 3D printing and soft robotics needs a summary of the major reported studies and the authors believe that this review article serves the purpose.

Three-Dimensionally Printed Micro-electromechanical Switches.

Science.gov (United States)

Lee, Yongwoo; Han, Jungmin; Choi, Bongsik; Yoon, Jinsu; Park, Jinhee; Kim, Yeamin; Lee, Jieun; Kim, Dae Hwan; Kim, Dong Myong; Lim, Meehyun; Kang, Min-Ho; Kim, Sungho; Choi, Sung-Jin

2018-05-09

Three-dimensional (3D) printers have attracted considerable attention from both industry and academia and especially in recent years because of their ability to overcome the limitations of two-dimensional (2D) processes and to enable large-scale facile integration techniques. With 3D printing technologies, complex structures can be created using only a computer-aided design file as a reference; consequently, complex shapes can be manufactured in a single step with little dependence on manufacturer technologies. In this work, we provide a first demonstration of the facile and time-saving 3D printing of two-terminal micro-electromechanical (MEM) switches. Two widely used thermoplastic materials were used to form 3D-printed MEM switches; freely suspended and fixed electrodes were printed from conductive polylactic acid, and a water-soluble sacrificial layer for air-gap formation was printed from poly(vinyl alcohol). Our 3D-printed MEM switches exhibit excellent electromechanical properties, with abrupt switching characteristics and an excellent on/off current ratio value exceeding 10 6 . Therefore, we believe that our study makes an innovative contribution with implications for the development of a broader range of 3D printer applications (e.g., the manufacturing of various MEM devices and sensors), and the work highlights a uniquely attractive path toward the realization of 3D-printed electronics.

No-infill 3D Printing

Science.gov (United States)

Wei, Xiao-Ran; Zhang, Yu-He; Geng, Guo-Hua

2016-09-01

In this paper, we examined how printing the hollow objects without infill via fused deposition modeling, one of the most widely used 3D-printing technologies, by partitioning the objects to shell parts. More specifically, we linked the partition to the exact cover problem. Given an input watertight mesh shape S, we developed region growing schemes to derive a set of surfaces that had inside surfaces that were printable without support on the mesh for the candidate parts. We then employed Monte Carlo tree search over the candidate parts to obtain the optimal set cover. All possible candidate subsets of exact cover from the optimal set cover were then obtained and the bounded tree was used to search the optimal exact cover. We oriented each shell part to the optimal position to guarantee the inside surface was printed without support, while the outside surface was printed with minimum support. Our solution can be applied to a variety of models, closed-hollowed or semi-closed, with or without holes, as evidenced by experiments and performance evaluation on our proposed algorithm.

New EB curing system for narrow web, using Min-EB

International Nuclear Information System (INIS)

Nakamura, Tetsuhisa; Tominaga, Hiroshi; Oizumi, Kei

2003-01-01

We, TOYO INK, developed the new equipment of EB curing system for narrow web composed of vacuum tube-type electron beam irradiation apparatus called Min-EB which is specialized with ultra-low voltage, 50-60 KV, and not damaging against the substrate. The new development is very small size, 66 cm width, 64 cm depth, 80 cm height and convenient to install into printing and coating machines. Several tubes, Min-EB, are assembled to be multi-tube module, called MTM, to easily handle. Basically we can change the irradiation width and printing and coating speed by increasing MTM due to the sheet size and printing and coating condition. We got good results, showing high density for the printed film, after used new EB curing system. (author)

Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic Surgery

OpenAIRE

Choi, Jong Woo; Kim, Namkug

2015-01-01

Three-dimensional (3D) printing has been particularly widely adopted in medical fields. Application of the 3D printing technique has even been extended to bio-cell printing for 3D tissue/organ development, the creation of scaffolds for tissue engineering, and actual clinical application for various medical parts. Of various medical fields, craniofacial plastic surgery is one of areas that pioneered the use of the 3D printing concept. Rapid prototype technology was introduced in the 1990s to m...

A screen-printed flexible flow sensor

International Nuclear Information System (INIS)

Moschos, A; Kaltsas, G; Syrovy, T; Syrova, L

2017-01-01

A thermal flow sensor was printed on a flexible plastic substrate using exclusively screen-printing techniques. The presented device was implemented with custom made screen-printed thermistors, which allows simple, cost-efficient production on a variety of flexible substrates while maintaining the typical advantages of thermal flow sensors. Evaluation was performed for both static (zero flow) and dynamic conditions using a combination of electrical measurements and IR imaging techniques in order to determine important characteristics, such as temperature response, output repeatability, etc. The flow sensor was characterized utilizing the hot-wire and calorimetric principles of operation, while the preliminary results appear to be very promising, since the sensor was successfully evaluated and displayed adequate sensitivity in a relatively wide flow range. (paper)

Automated Security Testing of Web Widget Interactions

NARCIS (Netherlands)

Bezemer, C.P.; Mesbah, A.; Van Deursen, A.

2009-01-01

This paper is a pre-print of: Cor-Paul Bezemer, Ali Mesbah, and Arie van Deursen. Automated Security Testing of Web Widget Interactions. In Proceedings of the 7th joint meeting of the European Software Engineering Conference and the ACM SIGSOFT Symposium on the Foundations of Software Engineering

Variable-data Printing Serves - Niches Here, There & Everywhere

Directory of Open Access Journals (Sweden)

Roger Ynostroza

2004-12-01

Full Text Available A milestone focus on high-end digital color presses capable of variable-data imaging - a technology that was introduced ten years ago and is just now at the beginning of wider, more successful implementation in commercial printing-tends to overshadow some real achievements on other variable-data fronts. Those activities involve ink-jet and electrophotographic imaging for high-volume transactional printing, print-on-demand books and catalogs, wide-format proofing and imaging, label production, and printing of text and coding of printed packaging.The capabilities of digital production color presses intrigue commercial printers the most, especially new units referred to by manufacturers as "Series II" or "third-generation" systems. Besides having more press-like characteristics, from offset-caliber quality, image consistency, and high output rates to sturdy construction, reliability, and stock choice, the units seem to represent a way to produce printing that’s beyond the norm.Some users are producing hybrid printed products (offset printing a quantity of "shells" that are later personalized by digital presses, while others are utilizing clients’ "dynamic" databases to personalize marketing materials that drive response rates up to 15%, even 35%. Finally, digital color systems prompt the creation of high-margin Internet-based print providers offering easy-to-design and easy-toorder print materials. Printers may do well to adopt the high-value communications capability that digital imaging offers.

Glue ear: how good is the information on the World Wide Web?

Science.gov (United States)

Ritchie, L; Tornari, C; Patel, P M; Lakhani, R

2016-02-01

This paper objectively evaluates current information available to the general public related to glue ear on the World Wide Web. The term 'glue ear' was typed into the 3 most frequently used internet search engines - Google, Bing and Yahoo - and the first 20 links were analysed. The first 400 words of each page were used to calculate the Flesch-Kincaid readability score. Each website was subsequently graded using the Discern instrument, which gauges quality and content of literature. The websites Webmd.boots.com, Bupa.co.uk and Patient.co.uk received the highest overall scores. These reflected top scores in either readability or Discern instrument assessment, but not both. Readability and Discern scores increased with the presence of a marketing or advertising incentive. The Patient.co.uk website had the highest Discern score and third highest readability score. There is huge variation in the quality of information available to patients on the internet. Some websites may be accessible to a wide range of reading ages but have poor quality content, and vice versa. Clinicians should be aware of indicators of quality, and use validated instruments to assess and recommend literature.

Late Print Culture’s Social Media Revolution: Authorship, Collaboration and Copy Machines

Directory of Open Access Journals (Sweden)

Kate Eichhorn

2013-05-01

Full Text Available This article examines the impact of copy machines on late twentieth-century print cultures. Specifically, this article makes a case for “dry copying,” the method of print reproduction perfected by Xerox in the late 1950s, as a unique medium rather than a weak imitation of other printing methods. Following the claim that the widespread availability of copy machines in the late twentieth century represented the arrival of a new medium, this article further examines how understandings of authorship, established with print culture, came undone in the era of the copy machine. Finally, this paper makes a case for understanding copy machines as a form of “social media” that opened up opportunities for writers, readers and publishers to create, share, exchange and comment on texts and images in communities and networks of their own making in the decades preceding the development of the web.

Pilot using World Wide Web to prevent diabetes in adolescents.

Science.gov (United States)

Long, Joann D; Armstrong, Myrna L; Amos, Elizabeth; Shriver, Brent; Roman-Shriver, Carmen; Feng, Du; Harrison, Lanell; Luker, Scott; Nash, Anita; Blevins, Monica Witcher

2006-02-01

This pilot study tested the effects of an interactive nutrition education Web site on fruit, vegetable, and fat consumption in minority adolescents genetically at risk for Type 2 diabetes. A one-group nonexperimental pretest, posttest focus group design was used. Twenty-one sixth-grade to eighth-grade junior high adolescents who were minorities volunteered to participate. Participants received 5 hours of Web-based nutrition education over 3 weeks. A significant difference in fat consumption was supported from the computerized dietary assessment. No difference was found in fruit or vegetable consumption. Comparative data indicated a rise in body mass index (BMI) percentile from 88.03 (1999) to 88.40 (2002; boys) and 88.25 (1999) to 91.2 (2002; girls). Focus group responses supported the satisfaction of adolescents in the study with the use of the Web-based intervention for nutrition education. Healthy eating interventions using Web-based nutrition education should be further investigated with adolescents.

Advances in 3D printing & additive manufacturing technologies

CERN Document Server

Pandey, Pulak; Kumar, L

2017-01-01

This edited volume comprises select chapters on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, prototypes and patterns. Because of its wide applications, 3D printing and additive manufacturing technology has become a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across industries such as consumer products, aerospace, medical devices and automotives. The objective of this book is to help designers, R&D personnel, and practicing engineers understand the state-of-the-art developments in the field of 3D Printing and Additive Manufacturing. .

Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics.

Science.gov (United States)

Cui, Zheng; Han, Yiwei; Huang, Qijin; Dong, Jingyan; Zhu, Yong

2018-04-19

A silver nanowire (AgNW) based conductor is a promising component for flexible and stretchable electronics. A wide range of flexible/stretchable devices using AgNW conductors has been demonstrated recently. High-resolution, high-throughput printing of AgNWs remains a critical challenge. Electrohydrodynamic (EHD) printing has been developed as a promising technique to print different materials on a variety of substrates with high resolution. Here, AgNW ink was developed for EHD printing. The printed features can be controlled by several parameters including AgNW concentration, ink viscosity, printing speed, stand-off distance, etc. With this method, AgNW patterns can be printed on a range of substrates, e.g. paper, polyethylene terephthalate (PET), glass, polydimethylsiloxane (PDMS), etc. First, AgNW samples on PDMS were characterized under bending and stretching. Then AgNW heaters and electrocardiogram (ECG) electrodes were fabricated to demonstrate the potential of this printing technique for AgNW-based flexible and stretchable devices.

From printed geological maps to web-based service oriented data products - strategies, foundations and problems.

Science.gov (United States)

Ebner, M.; Schiegl, M.; Stöckl, W.; Heger, H.

2012-04-01

The Geological Survey of Austria is legally obligated by the INSPIRE directive to provide data that fall under this directive (geology, mineral resources and natural risk zones) to the European commission in a semantically harmonized and technically interoperable way. Until recently the focus was entirely on the publication of high quality printed cartographic products. These have a complex (carto-)graphic data-model, which allows visualizing several thematic aspects, such as lithology, stratigraphy, tectonics, geologic age, mineral resources, mass movements, geomorphology etc. in a single planar map/product. Nonetheless these graphic data-models do not allow retrieving individual thematic aspects since these were coded in a complex portrayal scheme. Automatic information retrieval is thus impossible; and domain knowledge is necessary to interpret these "encrypted datasets". With INSPIRE becoming effective and a variety of conceptual models (e.g. GeoSciML), built around a semantic framework (i.e. controlled vocabularies), being available it is necessary to develop a strategy and workflow for semantic harmonization of such datasets. In this contribution we demonstrate the development of a multistage workflow which will allow us to transform our printed maps to semantically enabled datasets and services and discuss some prerequisites, foundations and problems. In a first step in our workflow we analyzed our maps and developed controlled vocabularies that describe the thematic content of our data. We then developed a physical data-model which we use to attribute our spatial data with thematic information from our controlled vocabularies to form core thematic data sets. This physical data model is geared towards use on an organizational level but builds upon existing standards (INSPIRE, GeoSciML) to allow transformation to international standards. In a final step we will develop a standardized mapping scheme to publish INSPIRE conformant services from our core datasets

Interactive fluka: a world wide web version for a simulation code in proton therapy

International Nuclear Information System (INIS)

Garelli, S.; Giordano, S.; Piemontese, G.; Squarcia, S.

1998-01-01

We considered the possibility of using the simulation code FLUKA, in the framework of TERA. We provided a window under World Wide Web in which an interactive version of the code is available. The user can find instructions for the installation, an on-line FLUKA manual and interactive windows for inserting all the data required by the configuration running file in a very simple way. The database choice allows a more versatile use for data verification and update, recall of old simulations and comparison with selected examples. A completely new tool for geometry drawing under Java has also been developed. (authors)

Web Search Engines

OpenAIRE

Rajashekar, TB

1998-01-01

The World Wide Web is emerging as an all-in-one information source. Tools for searching Web-based information include search engines, subject directories and meta search tools. We take a look at key features of these tools and suggest practical hints for effective Web searching.

Cpf1-Database: web-based genome-wide guide RNA library design for gene knockout screens using CRISPR-Cpf1.

Science.gov (United States)

Park, Jeongbin; Bae, Sangsu

2018-03-15

Following the type II CRISPR-Cas9 system, type V CRISPR-Cpf1 endonucleases have been found to be applicable for genome editing in various organisms in vivo. However, there are as yet no web-based tools capable of optimally selecting guide RNAs (gRNAs) among all possible genome-wide target sites. Here, we present Cpf1-Database, a genome-wide gRNA library design tool for LbCpf1 and AsCpf1, which have DNA recognition sequences of 5'-TTTN-3' at the 5' ends of target sites. Cpf1-Database provides a sophisticated but simple way to design gRNAs for AsCpf1 nucleases on the genome scale. One can easily access the data using a straightforward web interface, and using the powerful collections feature one can easily design gRNAs for thousands of genes in short time. Free access at http://www.rgenome.net/cpf1-database/. sangsubae@hanyang.ac.kr.

CORROSION ANALYSIS OF METALLIZED FILMS AFTER PRINTING

OpenAIRE

Mr. Dhirender*1, Mr. Rajeev2 & Mr.Manoj3

2017-01-01

Print quality has always been a point of strong concern among printers and consumers. Metalized films have gain a wide spread popularity among printers because of its low cost and high usages in food packaging applications. But sometimes corrosion spoils the printed products causing huge financial loss to the printers or customers.This paper throws light on major causes of corrosion on metallized films and possible remedies for the same. The metallized films with polyester base were base coat...

NASA wide electronic publishing system: Electronic printing and duplicating. Stage 3 evaluation report

Science.gov (United States)

Tuey, Richard C.; Moore, Fred W.; Ryan, Christine A.

1995-01-01

The report is presented in four sections: The Introduction describes the duplicating configuration under evaluation and the Background contains a chronological description of the evaluation segmented by phases 1 and 2. This section includes the evaluation schedule, printing and duplicating requirements, storage and communication requirements, electronic publishing system configuration, existing processes and proposed processes, billing rates, costs and productivity analysis, and the return on investment based upon the data gathered to date. The third section contains the phase 1 comparative cost and productivity analysis. This analysis demonstrated that LaRC should proceed with a 90-day evaluation of the DocuTech and follow with a phase 2 cycle to actually demonstrate that the proposed system would meet the needs of LaRC's printing and duplicating requirements, benchmark results, cost comparisons, benchmark observations, and recommendations. These are documented after the recommendations.

Semantic Web Primer

NARCIS (Netherlands)

Antoniou, Grigoris; Harmelen, Frank van

2004-01-01

The development of the Semantic Web, with machine-readable content, has the potential to revolutionize the World Wide Web and its use. A Semantic Web Primer provides an introduction and guide to this still emerging field, describing its key ideas, languages, and technologies. Suitable for use as a

3D printing for clinical application in otorhinolaryngology.

Science.gov (United States)

Zhong, Nongping; Zhao, Xia

2017-12-01

Three-dimensional (3D) printing is a promising technology that can use a patient's image data to create complex and personalized constructs precisely. It has made great progress over the past few decades and has been widely used in medicine including medical modeling, surgical planning, medical education and training, prosthesis and implants. Three-dimensional (3D) bioprinting is a powerful tool that has the potential to fabricate bioengineered constructs of the desired shape layer-by-layer using computer-aided deposition of living cells and biomaterials. Advances in 3D printed implants and future tissue-engineered constructs will bring great progress to the field of otolaryngology. By integrating 3D printing into tissue engineering and materials, it may be possible for otolaryngologists to implant 3D printed functional grafts into patients for reconstruction of a variety of tissue defects in the foreseeable future. In this review, we will introduce the current state of 3D printing technology and highlight the applications of 3D printed prosthesis and implants, 3D printing technology combined with tissue engineering and future directions of bioprinting in the field of otolaryngology.

EL device pad-printed on a curved surface

International Nuclear Information System (INIS)

Lee, Taik-Min; Hur, Shin; Kim, Jae-Hyun; Choi, Hyun-Cheol

2010-01-01

This paper is unique in that the electroluminescence (EL) display device is fabricated on a curved surface using the pad-printing method. The precision of the pad-printing process is explored to verify whether it can be used for micro patterning. The minimum pattern size and pattern distortion, which is caused by use of the pad, were tested and simulated. The minimal pattern was found to be 35 µm wide and 2.4 µm thick. Pattern distortion when pad-printing on a flat surface, caused by the deformation of the silicon pad, was less than 5 µm. Numerical analysis shows how to estimate pattern distortion when pad-printing on a curved surface. The proposed EL display device consists of five layers, namely a bottom electrode, dielectric layer, phosphor, transparent electrode and a bus electrode. The ink of each layer was reformulated with solvents and the pad-printing conditions were controlled. A PEN film was used first in order to realize the pad-printing process condition of each layer. Finally, the EL display device was printed onto a dish with a radius of curvature of 80 mm. The luminance was 180 cd m −2

Printing method for organic light emitting device lighting

Science.gov (United States)

Ki, Hyun Chul; Kim, Seon Hoon; Kim, Doo-Gun; Kim, Tae-Un; Kim, Snag-Gi; Hong, Kyung-Jin; So, Soon-Yeol

2013-03-01

Organic Light Emitting Device (OLED) has a characteristic to change the electric energy into the light when the electric field is applied to the organic material. OLED is currently employed as a light source for the lighting tools because research has extensively progressed in the improvement of luminance, efficiency, and life time. OLED is widely used in the plate display device because of a simple manufacture process and high emitting efficiency. But most of OLED lighting projects were used the vacuum evaporator (thermal evaporator) with low molecular. Although printing method has lower efficiency and life time of OLED than vacuum evaporator method, projects of printing OLED actively are progressed because was possible to combine with flexible substrate and printing technology. Printing technology is ink-jet, screen printing and slot coating. This printing method allows for low cost and mass production techniques and large substrates. In this research, we have proposed inkjet printing for organic light-emitting devices has the dominant method of thick film deposition because of its low cost and simple processing. In this research, the fabrication of the passive matrix OLED is achieved by inkjet printing, using a polymer phosphorescent ink. We are measured optical and electrical characteristics of OLED.

Educational Applications on the World Wide Web: An Example Using Amphion

Science.gov (United States)

Friedman, Jane

1998-01-01

There is a great deal of excitement about using the internet and the World Wide Web in education. There are such exciting possibilities and there is a wealth and variety of material up on the web. There are however many problems, problems of access and resources, problems of quality -- for every excellent resource there are many poor ones, and there are insufficiently explored problems of teacher training and motivation. For example, Wiesenmayer and Meadows report on a study of 347 West Virginia science teachers. These teachers were enrolled in a week-long summer workshop to introduce them to the internet and its educational potential. The teachers were asked to review science sites as to overall quality and then about their usefulness in their own classrooms. The teachers were enthusiastic about the web, and gave two-thirds of the sites high ratings, and essentially all the rest average ratings. But alarmingly, over 80% of these sites were viewed as having no direct applicability in the teacher's own classroom. This summer I was assigned to work on the Amphion project in the Automated Software Engineering Group under the leadership of Michael Lowry. I wished to find educational applications of the Amphion system, which in its current implementation can be used to create fortran programs and animations using the SPICE libraries created by the NAIF group at JPL. I wished to find an application which provided real added educational value, which was in line with educational curriculum standards and which would serve a documented need of the educational community. The application selected was teaching about the causes of the seasons -- at the approximately the fourth, fifth, sixth grade level. This topic was chosen because it is in line with national curriculum standards. The fourth, fifth, sixth grade level was selected to coincide with the grade level served by the Ames Aerospace Encounter, which services 10,000 children a year on field trips. The hope is that

Packaging Printing Today

OpenAIRE

Stanislav Bolanča; Igor Majnarić; Kristijan Golubović

2015-01-01

Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. T...

Technobabble: Photoshop 6 Converges Web, Print Photograph-Editing Capabilities.

Science.gov (United States)

Communication: Journalism Education Today, 2001

2001-01-01

Discusses the newly-released Adobe Photoshop 6, and its use in student publications. Notes its refined text-handling capabilities, a more user-friendly interface, integrated vector functions, easier preparation of Web images, and new and more powerful layer functions. (SR)

Cytological analysis of atypical squamous epithelial cells of undetermined significance using the world wide web.

Science.gov (United States)

Washiya, Kiyotada; Abe, Ichinosuke; Ambo, Junichi; Iwai, Muneo; Okusawa, Estuko; Asanuma, Kyousuke; Watanabe, Jun

2011-01-01

The low-level consistency of the cytodiagnosis of uterine cervical atypical squamous epithelial cells of undetermined significance (ASC-US) employing the Bethesda System has been reported, suggesting the necessity of a wide survey. We presented cases judged as ASC-US on the Web and analyzed the voting results to investigate ASC-US cytologically. Cytology samples from 129 patients diagnosed with ASC-US were used. Images of several atypical cells observed in these cases were presented on the Web. The study, based on the voting results, was presented and opinions were exchanged at the meeting of the Japanese Society of Clinical Cytology. The final diagnosis of ASC-US was benign lesions in 76 cases and low- and high-grade squamous intraepithelial lesions in 44, but no definite diagnosis could be made for the remaining 9. The total number of votes was 17,884 with a 36.5% consistency of cases judged as ASC-US. Benign cases were divided into 6 categories. Four categories not corresponding to the features of koilocytosis and small abnormal keratinized cells were judged as negative for an intraepithelial lesion or malignancy at a high rate. A Web-based survey would be useful which could be viewed at any time and thereby facilitate the sharing of cases to increase consistency. Copyright © 2011 S. Karger AG, Basel.

TOGA COARE Satellite data summaries available on the World Wide Web

Science.gov (United States)

Chen, S. S.; Houze, R. A., Jr.; Mapes, B. E.; Brodzick, S. R.; Yutler, S. E.

1995-01-01

Satellite data summary images and analysis plots from the Tropical Ocean Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA COARE), which were initially prepared in the field at the Honiara Operations Center, are now available on the Internet via World Wide Web browsers such as Mosaic. These satellite data summaries consist of products derived from the Japanese Geosynchronous Meteorological Satellite IR data: a time-size series of the distribution of contiguous cold cloudiness areas, weekly percent high cloudiness (PHC) maps, and a five-month time-longitudinal diagram illustrating the zonal motion of large areas of cold cloudiness. The weekly PHC maps are overlaid with weekly mean 850-hPa wind calculated from the European Centre for Medium-Range Weather Forecasts (ECMWF) global analysis field and can be viewed as an animation loop. These satellite summaries provide an overview of spatial and temporal variabilities of the cloud population and a large-scale context for studies concerning specific processes of various components of TOGA COARE.

Direct and precise measurement of displacement and velocity of flexible web in roll-to-roll manufacturing systems

International Nuclear Information System (INIS)

Kang, Dongwoo; Lee, Eonseok; Choi, Young-Man; Lee, Taik-Min; Kim, Duk Young; Kim, Dongmin

2013-01-01

Interest in the production of printed electronics using a roll-to-roll system has gradually increased due to its low mass-production costs and compatibility with flexible substrate. To improve the accuracy of roll-to-roll manufacturing systems, the movement of the web needs to be measured precisely in advance. In this paper, a novel measurement method is developed to measure the displacement and velocity of the web precisely and directly. The proposed algorithm is based on the traditional single field encoder principle, and the scale grating has been replaced with a printed grating on the web. Because a printed grating cannot be as accurate as a scale grating in a traditional encoder, there will inevitably be variations in pitch and line-width, and the motion of the web should be measured even though there are variations in pitch and line-width in the printed grating patterns. For this reason, the developed algorithm includes a precise method of estimating the variations in pitch. In addtion, a method of correcting the Lissajous curve is presented for precision phase interpolation to improve measurement accuracy by correcting Lissajous circle to unit circle. The performance of the developed method is evaluated by simulation and experiment. In the experiment, the displacement error was less than 2.5 μm and the velocity error of 1σ was about 0.25%, while the grating scale moved 30 mm

Direct and precise measurement of displacement and velocity of flexible web in roll-to-roll manufacturing systems

Energy Technology Data Exchange (ETDEWEB)

Kang, Dongwoo; Lee, Eonseok; Choi, Young-Man; Lee, Taik-Min [Advanced Manufacturing Systems Research Division, Korea Institute of Machinery and Materials, 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 305-343 (Korea, Republic of); Kim, Duk Young [Nano-Opto-Mechatronics Lab., Dept. of Mechanical Eng., KAIST, 335 Gwahangno, Yuseong-Gu, Daejeon 305-701 (Korea, Republic of); Kim, Dongmin [Korea Research Institute of Standards and Science, 267 Gajeong-Ro, Yuseong-Gu, Daejeon 305-340 (Korea, Republic of)

2013-12-15

Interest in the production of printed electronics using a roll-to-roll system has gradually increased due to its low mass-production costs and compatibility with flexible substrate. To improve the accuracy of roll-to-roll manufacturing systems, the movement of the web needs to be measured precisely in advance. In this paper, a novel measurement method is developed to measure the displacement and velocity of the web precisely and directly. The proposed algorithm is based on the traditional single field encoder principle, and the scale grating has been replaced with a printed grating on the web. Because a printed grating cannot be as accurate as a scale grating in a traditional encoder, there will inevitably be variations in pitch and line-width, and the motion of the web should be measured even though there are variations in pitch and line-width in the printed grating patterns. For this reason, the developed algorithm includes a precise method of estimating the variations in pitch. In addtion, a method of correcting the Lissajous curve is presented for precision phase interpolation to improve measurement accuracy by correcting Lissajous circle to unit circle. The performance of the developed method is evaluated by simulation and experiment. In the experiment, the displacement error was less than 2.5 μm and the velocity error of 1σ was about 0.25%, while the grating scale moved 30 mm.

3D printing for soft robotics – a review

Science.gov (United States)

Gul, Jahan Zeb; Sajid, Memoon; Rehman, Muhammad Muqeet; Siddiqui, Ghayas Uddin; Shah, Imran; Kim, Kyung-Hwan; Lee, Jae-Wook; Choi, Kyung Hyun

2018-01-01

Abstract Soft robots have received an increasing attention due to their advantages of high flexibility and safety for human operators but the fabrication is a challenge. Recently, 3D printing has been used as a key technology to fabricate soft robots because of high quality and printing multiple materials at the same time. Functional soft materials are particularly well suited for soft robotics due to a wide range of stimulants and sensitive demonstration of large deformations, high motion complexities and varied multi-functionalities. This review comprises a detailed survey of 3D printing in soft robotics. The development of key 3D printing technologies and new materials along with composites for soft robotic applications is investigated. A brief summary of 3D-printed soft devices suitable for medical to industrial applications is also included. The growing research on both 3D printing and soft robotics needs a summary of the major reported studies and the authors believe that this review article serves the purpose. PMID:29707065

The Role of Higher Education in 3D Printing Research and Innovation

OpenAIRE

Diriba, Habtamu; Fraumann, Grischa; Maes, Jon

2015-01-01

Over the past three decades, the development of 3D printing has accelerated rapidly. In considering theories about the economic impact of disruptive technologies, this paper addresses how 3D printing has attracted unprecedented attention from various public and private stakeholders with signs that it will be a major driver of the next economic wave. Outlining the major changes that 3D printing has undergone since its inception, an argument is made that 3D printing has the potential to be wide...

A Straightforward Approach for 3D Bacterial Printing.

Science.gov (United States)

Lehner, Benjamin A E; Schmieden, Dominik T; Meyer, Anne S

2017-07-21

Sustainable and personally tailored materials production is an emerging challenge to society. Living organisms can produce and pattern an extraordinarily wide range of different molecules in a sustainable way. These natural systems offer an abundant source of inspiration for the development of new environmentally friendly materials production techniques. In this paper, we describe the first steps toward the 3-dimensional printing of bacterial cultures for materials production and patterning. This methodology combines the capability of bacteria to form new materials with the reproducibility and tailored approach of 3D printing systems. For this purpose, a commercial 3D printer was modified for bacterial systems, and new alginate-based bioink chemistry was developed. Printing temperature, printhead speed, and bioink extrusion rate were all adapted and customized to maximize bacterial health and spatial resolution of printed structures. Our combination of 3D printing technology with biological systems enables a sustainable approach for the production of numerous new materials.

Integrated digital printing of flexible circuits for wireless sensing (Conference Presentation)

Science.gov (United States)

Mei, Ping; Whiting, Gregory L.; Schwartz, David E.; Ng, Tse Nga; Krusor, Brent S.; Ready, Steve E.; Daniel, George; Veres, Janos; Street, Bob

2016-09-01

Wireless sensing has broad applications in a wide variety of fields such as infrastructure monitoring, chemistry, environmental engineering and cold supply chain management. Further development of sensing systems will focus on achieving light weight, flexibility, low power consumption and low cost. Fully printed electronics provide excellent flexibility and customizability, as well as the potential for low cost and large area applications, but lack solutions for high-density, high-performance circuitry. Conventional electronics mounted on flexible printed circuit boards provide high performance but are not digitally fabricated or readily customizable. Incorporation of small silicon dies or packaged chips into a printed platform enables high performance without compromising flexibility or cost. At PARC, we combine high functionality c-Si CMOS and digitally printed components and interconnects to create an integrated platform that can read and process multiple discrete sensors. Our approach facilitates customization to a wide variety of sensors and user interfaces suitable for a broad range of applications including remote monitoring of health, structures and environment. This talk will describe several examples of printed wireless sensing systems. The technologies required for these sensor systems are a mix of novel sensors, printing processes, conventional microchips, flexible substrates and energy harvesting power solutions.

A brief history of the World Wide Web Where it as invented, how it's used, and where it's headed

CERN Document Server

Kyrnin, Jennifer

2005-01-01

The World Wide Web has its historical roots in things such as the creation of the telegraph, the launching of the Sputnik and more, but it really all started in March 1989, when Tim Berners-Lee, a computer scientist at CERN in Geneva wrote a paper called Information Management: A proposal

Effects of Learning Style and Training Method on Computer Attitude and Performance in World Wide Web Page Design Training.

Science.gov (United States)

Chou, Huey-Wen; Wang, Yu-Fang

1999-01-01

Compares the effects of two training methods on computer attitude and performance in a World Wide Web page design program in a field experiment with high school students in Taiwan. Discusses individual differences, Kolb's Experiential Learning Theory and Learning Style Inventory, Computer Attitude Scale, and results of statistical analyses.…

Fully inkjet printed wide band cantor fractal antenna for RF energy harvesting application

KAUST Repository

Bakytbekov, Azamat; Maza, Armando Rodriguez; Nafe, Mahmoud; Shamim, Atif

2017-01-01

and an omnidirectional radiation pattern. In this work, a novel Cantor fractal antenna has been designed which fulfills the above mentioned performance requirements. Antenna has been realized through a combination of 3D inkjet printing of plastic substrate and 2D inkjet

Packaging Printing Today

Directory of Open Access Journals (Sweden)

Stanislav Bolanča

2015-12-01

Full Text Available Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. The possibilities of particular printing techniques for optimal production of the determined packaging were studied in the paper. The problem was viewed from the technological and economical aspect. The possible printing quality and the time necessary for the printing realization were taken as key parameters. An important segment of the production and the way of life is alocation value and it had also found its place in this paper. The events in the field of packaging printing in the whole world were analyzed. The trends of technique developments and the printing technology for packaging printing in near future were also discussed.

Implementation of a World Wide Web server for the oil and gas industry

International Nuclear Information System (INIS)

Blaylock, R.E.; Martin, F.D.; Emery, R.

1996-01-01

The Gas and Oil Technology Exchange and Communication Highway (GO-TECH) provides an electronic information system for the petroleum community for exchanging ideas, data, and technology. The PC-based system fosters communication and discussion by linking the oil and gas producers with resource centers, government agencies, consulting firms, service companies, national laboratories, academic research groups, and universities throughout the world. The oil and gas producers can access the GO-TECH World Wide Web (WWW) home page through modem links, as well as through the Internet. Future GO-TECH applications will include the establishment of virtual corporations consisting of consortia of small companies, consultants, and service companies linked by electronic information systems. These virtual corporations will have the resources and expertise previously found only in major corporations

Web wisdom how to evaluate and create information quality on the Web

CERN Document Server

Alexander, Janet E

1999-01-01

Web Wisdom is an essential reference for anyone needing to evaluate or establish information quality on the World Wide Web. The book includes easy to use checklists for step-by-step quality evaluations of virtually any Web page. The checklists can also be used by Web authors to help them ensure quality information on their pages. In addition, Web Wisdom addresses other important issues, such as understanding the ways that advertising and sponsorship may affect the quality of Web information. It features: * a detailed discussion of the items involved in evaluating Web information; * checklists

3D/Additive Printing Manufacturing: A Brief History and Purchasing Guide

Science.gov (United States)

Hughes, Bill; Wilson, Greg

2016-01-01

3D printing is recognized as a collection of technologies known as rapid prototyping, solid freeform fabrication, and most commonly, additive manufacturing (AM). With these emerging technologies it is possible to print (but not limited to): architectural models, discontinued car-part foundry patterns, industry-wide prototypes, human tissues, the…

Screen Printing of Highly Loaded Silver Inks on Plastic Substrates Using Silicon Stencils.

Science.gov (United States)

Hyun, Woo Jin; Lim, Sooman; Ahn, Bok Yeop; Lewis, Jennifer A; Frisbie, C Daniel; Francis, Lorraine F

2015-06-17

Screen printing is a potential technique for mass-production of printed electronics; however, improvement in printing resolution is needed for high integration and performance. In this study, screen printing of highly loaded silver ink (77 wt %) on polyimide films is studied using fine-scale silicon stencils with openings ranging from 5 to 50 μm wide. This approach enables printing of high-resolution silver lines with widths as small as 22 μm. The printed silver lines on polyimide exhibit good electrical properties with a resistivity of 5.5×10(-6) Ω cm and excellent bending tolerance for bending radii greater than 5 mm (tensile strains less than 0.75%).

Presentation of klystron history and statistics by World-Wide Web

International Nuclear Information System (INIS)

Kamikubota, N.; Furukawa, K.

2000-01-01

A web-based system for browsing klystron histories and statistics has been developed for the KEKB e-/e+ linac. This system enables linac staffs to investigate various klystron histories, such as recent trends of ES (down frequency/reflection/high voltage), at his/her convenient PC/Mac/console, where a web-browser is available. This system started in January 2000, and now becomes an inevitable tool for the linac staffs. (author)

Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic Surgery

Science.gov (United States)

Kim, Namkug

2015-01-01

Three-dimensional (3D) printing has been particularly widely adopted in medical fields. Application of the 3D printing technique has even been extended to bio-cell printing for 3D tissue/organ development, the creation of scaffolds for tissue engineering, and actual clinical application for various medical parts. Of various medical fields, craniofacial plastic surgery is one of areas that pioneered the use of the 3D printing concept. Rapid prototype technology was introduced in the 1990s to medicine via computer-aided design, computer-aided manufacturing. To investigate the current status of 3D printing technology and its clinical application, a systematic review of the literature was conducted. In addition, the benefits and possibilities of the clinical application of 3D printing in craniofacial surgery are reviewed, based on personal experiences with more than 500 craniofacial cases conducted using 3D printing tactile prototype models. PMID:26015880

Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic Surgery

Directory of Open Access Journals (Sweden)

Jong Woo Choi

2015-05-01

Full Text Available Three-dimensional (3D printing has been particularly widely adopted in medical fields. Application of the 3D printing technique has even been extended to bio-cell printing for 3D tissue/organ development, the creation of scaffolds for tissue engineering, and actual clinical application for various medical parts. Of various medical fields, craniofacial plastic surgery is one of areas that pioneered the use of the 3D printing concept. Rapid prototype technology was introduced in the 1990s to medicine via computer-aided design, computer-aided manufacturing. To investigate the current status of 3D printing technology and its clinical application, a systematic review of the literature was conducted. In addition, the benefits and possibilities of the clinical application of 3D printing in craniofacial surgery are reviewed, based on personal experiences with more than 500 craniofacial cases conducted using 3D printing tactile prototype models.

Students' Perceptions of the Effectiveness of the World Wide Web as a Research and Teaching Tool in Science Learning.

Science.gov (United States)

Ng, Wan; Gunstone, Richard

2002-01-01

Investigates the use of the World Wide Web (WWW) as a research and teaching tool in promoting self-directed learning groups of 15-year-old students. Discusses the perceptions of students of the effectiveness of the WWW in assisting them with the construction of knowledge on photosynthesis and respiration. (Contains 33 references.) (Author/YDS)

"Così abbiamo creato il World Wide Web"

CERN Multimedia

Sigiani, GianLuca

2002-01-01

Meeting with Robert Cailliau, scientist and pioneer of the web, who, in a book, tells how at CERN in Geneva, his team transformed Internet (an instrument used for military purposes) in one of the most revolutionary tool of mass media from ever (1 page)

Physical security and cyber security issues and human error prevention for 3D printed objects: detecting the use of an incorrect printing material

Science.gov (United States)

Straub, Jeremy

2017-06-01

A wide variety of characteristics of 3D printed objects have been linked to impaired structural integrity and use-efficacy. The printing material can also have a significant impact on the quality, utility and safety characteristics of a 3D printed object. Material issues can be created by vendor issues, physical security issues and human error. This paper presents and evaluates a system that can be used to detect incorrect material use in a 3D printer, using visible light imaging. Specifically, it assesses the ability to ascertain the difference between materials of different color and different types of material with similar coloration.

Online press: The relations between the content in print and online editions of daily newspapers

Directory of Open Access Journals (Sweden)

Bajić Predrag

2017-01-01

Full Text Available The purpose of this article is to observe the connection between the same content in the print editions of daily newspapers in Serbia and on their web portals, i.e. the changes that occur in the digital world as compared to the 'static' content that can be seen on paper (text and photos. In the digital era, the newspapers is struggling to retain considerable influence and manages to do so through synchronization, promotion and transfer of media contents from one platform to another. At present, we see the attempts to maintain exclusivity of content in newspapers, as much as possible, just by promoting it on a web portal (through a single photograph or some previews of the whole text. They serve as 'bait' in an effort to increase interest for buying the newspapers. Also, unlike the situation with the print, the placement of the same contents on portals can be enriched by adding multimedia elements. There we encounter a 'paradox', i.e. the fact that on the internet, where space is practically unlimited, we have a shortening of the textual parts due to the explications that can be obtained through multimedia contents and links. On the other hand, that is impossible in the case of print, where a longer text is required, although there are clear spatial limitations. No matter the advantages of multimedia enrichments, there we also find a distinctive 'trap', in terms that there is a possibility that the content disappears. With print, where we do not have 'half-finished' product and the contents cannot change once printed, there is no such risk. Further, the digital age gave the print media a possibility to generate, transmit and distribute exclusive audio-visual content.

Print quality challenges for the next decade

Science.gov (United States)

Meyer, John D.

1990-07-01

The decade of the eighties has seen a remarkable transformation in the performance and capabilities of shared and personal printers. Dramatic gains have been made in four key areas: cost, throughput, reliability and most significantly, print quality. The improvements in text print quality due to algorithmic fonts and increased resolution have been pivotal in the creation of the desktop publishing market. Electronic pre-press systems now include hardware to receive Postscript files accompanied by color originals for scanning and separation. These systems have application in the commercial printing of a wide variety of material e.g. books, magazines, brochures, newspapers. The vision of the future of hardcopy now embraces the full spectrum from typeset text to full color reproduction of natural images due to the advent of grayscale and color capability in printer technology. This will place increased demands for improvements in print quality, particularly in the use of grayscale and color. This paper gives an overview of the challenges which must be met and discusses data communication standards and print quality measurement techniques as a means of meeting these challenges for both color and black and white output.

Vision based error detection for 3D printing processes

Directory of Open Access Journals (Sweden)

Baumann Felix

2016-01-01

Full Text Available 3D printers became more popular in the last decade, partly because of the expiration of key patents and the supply of affordable machines. The origin is located in rapid prototyping. With Additive Manufacturing (AM it is possible to create physical objects from 3D model data by layer wise addition of material. Besides professional use for prototyping and low volume manufacturing they are becoming widespread amongst end users starting with the so called Maker Movement. The most prevalent type of consumer grade 3D printers is Fused Deposition Modelling (FDM, also Fused Filament Fabrication FFF. This work focuses on FDM machinery because of their widespread occurrence and large number of open problems like precision and failure. These 3D printers can fail to print objects at a statistical rate depending on the manufacturer and model of the printer. Failures can occur due to misalignment of the print-bed, the print-head, slippage of the motors, warping of the printed material, lack of adhesion or other reasons. The goal of this research is to provide an environment in which these failures can be detected automatically. Direct supervision is inhibited by the recommended placement of FDM printers in separate rooms away from the user due to ventilation issues. The inability to oversee the printing process leads to late or omitted detection of failures. Rejects effect material waste and wasted time thus lowering the utilization of printing resources. Our approach consists of a camera based error detection mechanism that provides a web based interface for remote supervision and early failure detection. Early failure detection can lead to reduced time spent on broken prints, less material wasted and in some cases salvaged objects.

An Exploratory Survey of Digital Libraries on the World Wide Web: Art and Literature of the Early Italian Renaissance.

Science.gov (United States)

McKibben, Suzanne J.

This study assessed the ongoing development of digital libraries (DLs) on the World Wide Web. DLs of art and literature were surveyed for selected works from the early Italian Renaissance in order to gain insight into the current trends prevalent throughout the larger population of DLs. The following artists and authors were selected for study:…

Beyond reading level: a systematic review of the suitability of cancer education print and Web-based materials.

Science.gov (United States)

Finnie, Ramona K C; Felder, Tisha M; Linder, Suzanne Kneuper; Mullen, Patricia Dolan

2010-12-01

Consideration of categories related to reading comprehension--beyond reading level--is imperative to reach low literacy populations effectively. "Suitability" has been proposed as a term to encompass six categories of such factors: content, literacy demand graphics, layout/typography, learning stimulation, and cultural appropriateness. Our purpose was to describe instruments used to evaluate categories of suitability in cancer education materials in published reports and their findings. We searched databases and reference lists for evaluations of print and Web-based cancer education materials to identify and describe measures of these categories. Studies had to evaluate reading level and at least one category of suitability. Eleven studies met our criteria. Seven studies reported inter-rater reliability. Cultural appropriateness was most often assessed; four instruments assessed only surface aspects of cultural appropriateness. Only two of seven instruments used, the suitability assessment of materials (SAM) and the comprehensibility assessment of materials (SAM + CAM), were described as having any evidence of validity. Studies using Simplified Measure of Goobledygook (SMOG) and Fry reported higher average reading level scores than those using Flesh-Kincaid. Most materials failed criteria for reading level and cultural appropriateness. We recommend more emphasis on the categories of suitability for those developing cancer education materials and more study of these categories and reliability and validity testing of instruments.

Exploring U.S Cropland - A Web Service based Cropland Data Layer Visualization, Dissemination and Querying System (Invited)

Science.gov (United States)

Yang, Z.; Han, W.; di, L.

2010-12-01

The National Agricultural Statistics Service (NASS) of the USDA produces the Cropland Data Layer (CDL) product, which is a raster-formatted, geo-referenced, U.S. crop specific land cover classification. These digital data layers are widely used for a variety of applications by universities, research institutions, government agencies, and private industry in climate change studies, environmental ecosystem studies, bioenergy production & transportation planning, environmental health research and agricultural production decision making. The CDL is also used internally by NASS for crop acreage and yield estimation. Like most geospatial data products, the CDL product is only available by CD/DVD delivery or online bulk file downloading via the National Research Conservation Research (NRCS) Geospatial Data Gateway (external users) or in a printed paper map format. There is no online geospatial information access and dissemination, no crop visualization & browsing, no geospatial query capability, nor online analytics. To facilitate the application of this data layer and to help disseminating the data, a web-service based CDL interactive map visualization, dissemination, querying system is proposed. It uses Web service based service oriented architecture, adopts open standard geospatial information science technology and OGC specifications and standards, and re-uses functions/algorithms from GeoBrain Technology (George Mason University developed). This system provides capabilities of on-line geospatial crop information access, query and on-line analytics via interactive maps. It disseminates all data to the decision makers and users via real time retrieval, processing and publishing over the web through standards-based geospatial web services. A CDL region of interest can also be exported directly to Google Earth for mashup or downloaded for use with other desktop application. This web service based system greatly improves equal-accessibility, interoperability, usability

Testing Quantum Models of Conjunction Fallacy on the World Wide Web

Science.gov (United States)

Aerts, Diederik; Arguëlles, Jonito Aerts; Beltran, Lester; Beltran, Lyneth; de Bianchi, Massimiliano Sassoli; Sozzo, Sandro; Veloz, Tomas

2017-12-01

The `conjunction fallacy' has been extensively debated by scholars in cognitive science and, in recent times, the discussion has been enriched by the proposal of modeling the fallacy using the quantum formalism. Two major quantum approaches have been put forward: the first assumes that respondents use a two-step sequential reasoning and that the fallacy results from the presence of `question order effects'; the second assumes that respondents evaluate the cognitive situation as a whole and that the fallacy results from the `emergence of new meanings', as an `effect of overextension' in the conceptual conjunction. Thus, the question arises as to determine whether and to what extent conjunction fallacies would result from `order effects' or, instead, from `emergence effects'. To help clarify this situation, we propose to use the World Wide Web as an `information space' that can be interrogated both in a sequential and non-sequential way, to test these two quantum approaches. We find that `emergence effects', and not `order effects', should be considered the main cognitive mechanism producing the observed conjunction fallacies.

A World Wide Web-based antimicrobial stewardship program improves efficiency, communication, and user satisfaction and reduces cost in a tertiary care pediatric medical center.

Science.gov (United States)

Agwu, Allison L; Lee, Carlton K K; Jain, Sanjay K; Murray, Kara L; Topolski, Jason; Miller, Robert E; Townsend, Timothy; Lehmann, Christoph U

2008-09-15

Antimicrobial stewardship programs aim to reduce inappropriate hospital antimicrobial use. At the Johns Hopkins Children's Medical and Surgical Center (Baltimore, MD), we implemented a World Wide Web-based antimicrobial restriction program to address problems with the existing restriction program. A user survey identified opportunities for improvement of an existing antimicrobial restriction program and resulted in subsequent design, implementation, and evaluation of a World Wide Web-based antimicrobial restriction program at a 175-bed, tertiary care pediatric teaching hospital. The program provided automated clinical decision support, facilitated approval, and enhanced real-time communication among prescribers, pharmacists, and pediatric infectious diseases fellows. Approval status, duration, and rationale; missing request notifications; and expiring approvals were stored in a database that is accessible via a secure Intranet site. Before and after implementation of the program, user satisfaction, reports of missed and/or delayed doses, antimicrobial dispensing times, and cost were evaluated. After implementation of the program, there was a $370,069 reduction in projected annual cost associated with restricted antimicrobial use and an 11.6% reduction in the number of dispensed doses. User satisfaction increased from 22% to 68% and from 13% to 69% among prescribers and pharmacists, respectively. There were 21% and 32% reductions in the number of prescriber reports of missed and delayed doses, respectively, and there was a 37% reduction in the number of pharmacist reports of delayed approvals; measured dispensing times were unchanged (P = .24). In addition, 40% fewer restricted antimicrobial-related phone calls were noted by the pharmacy. The World Wide Web-based antimicrobial approval program led to improved communication, more-efficient antimicrobial administration, increased user satisfaction, and significant cost savings. Integrated tools, such as this World

A field test of a web-based workplace health promotion program to improve dietary practices, reduce stress, and increase physical activity: randomized controlled trial.

Science.gov (United States)

Cook, Royer F; Billings, Douglas W; Hersch, Rebekah K; Back, Anita S; Hendrickson, April

2007-06-19

Most work sites engage in some form of health promotion programming designed to improve worker health and reduce health care costs. Although these programs have typically been delivered through combinations of seminars and print materials, workplace health promotion programs are increasingly being delivered through the Internet. The purpose of this research was to evaluate the effectiveness of a Web-based multimedia health promotion program for the workplace, designed to improve dietary practices, reduce stress, and increase physical activity. Using a randomized controlled trial design with pretest-posttest comparisons within each group, 419 employees of a human resources company were randomly assigned to the Web-based condition or to a condition that provided print materials on the same topics. All subjects were assessed at pretest and posttest through an online questionnaire containing multiple measures of health behavior and attitudes. The test period was 3 months. Questionnaire data were analyzed mainly by analysis of covariance and t tests. Retention rates were good for both groups-85% for the Web-based group and 87% for the print group. Subjects using the Web-based program performed significantly better than the print group on Attitudes Toward a Healthful Diet (F(1,415) = 7.104, P = .008) and Dietary Stage of Change (F(1,408) = 6.487, P = .01), but there were no significant group differences on the five other dietary measures. Both groups also showed improvement from pretest to posttest on most dietary measures, as indicated by significant t tests. Within the Web-based group, dosage analyses showed significant effects of the number of times the subject accessed the program on measures of Dietary Self-Efficacy (F(2,203) = 5.270, P = .003), Attitudes Toward a Healthful Diet (F(2,204) = 2.585, P = .045), and Dietary Stage of Change (F(2,200) = 4.627, P = .005). No significant differences were found between the two groups on measures of stress or physical

Architecture and the Web.

Science.gov (United States)

Money, William H.

Instructors should be concerned with how to incorporate the World Wide Web into an information systems (IS) curriculum organized across three areas of knowledge: information technology, organizational and management concepts, and theory and development of systems. The Web fits broadly into the information technology component. For the Web to be…

From the printer: Potential of three-dimensional printing for orthopaedic applications

Directory of Open Access Journals (Sweden)

Sze-Wing Mok

2016-07-01

Full Text Available Three-dimensional (3D printers can create complex structures based on digital models. The combination of medical diagnostic imaging with 3D printing has great potential in day-to-day clinics for patient-specific solutions and applications. In the musculoskeletal system, 3D printing is used to create custom-made implants, patient-specific instrumentation, and to regenerate tissues, in particular bone and cartilage. The major limiting factors for bioprinting include the lack of printing techniques with optimal printing resolution and materials with ideal mechanical strengths while maintaining cellular functionality. Before “tissues from the printer” can be widely applied, further research and development on improving and optimising printing techniques and biomaterials, and knowledge on the development of printed constructs into living tissues, is essential for future clinical application of this technology.

Technical Note: Characterization of custom 3D printed multimodality imaging phantoms

International Nuclear Information System (INIS)

Bieniosek, Matthew F.; Lee, Brian J.; Levin, Craig S.

2015-01-01

Purpose: Imaging phantoms are important tools for researchers and technicians, but they can be costly and difficult to customize. Three dimensional (3D) printing is a widely available rapid prototyping technique that enables the fabrication of objects with 3D computer generated geometries. It is ideal for quickly producing customized, low cost, multimodal, reusable imaging phantoms. This work validates the use of 3D printed phantoms by comparing CT and PET scans of a 3D printed phantom and a commercial “Micro Deluxe” phantom. This report also presents results from a customized 3D printed PET/MRI phantom, and a customized high resolution imaging phantom with sub-mm features. Methods: CT and PET scans of a 3D printed phantom and a commercial Micro Deluxe (Data Spectrum Corporation, USA) phantom with 1.2, 1.6, 2.4, 3.2, 4.0, and 4.8 mm diameter hot rods were acquired. The measured PET and CT rod sizes, activities, and attenuation coefficients were compared. A PET/MRI scan of a custom 3D printed phantom with hot and cold rods was performed, with photon attenuation and normalization measurements performed with a separate 3D printed normalization phantom. X-ray transmission scans of a customized two level high resolution 3D printed phantom with sub-mm features were also performed. Results: Results show very good agreement between commercial and 3D printed micro deluxe phantoms with less than 3% difference in CT measured rod diameter, less than 5% difference in PET measured rod diameter, and a maximum of 6.2% difference in average rod activity from a 10 min, 333 kBq/ml (9 μCi/ml) Siemens Inveon (Siemens Healthcare, Germany) PET scan. In all cases, these differences were within the measurement uncertainties of our setups. PET/MRI scans successfully identified 3D printed hot and cold rods on PET and MRI modalities. X-ray projection images of a 3D printed high resolution phantom identified features as small as 350 μm wide. Conclusions: This work shows that 3D printed

Technical Note: Characterization of custom 3D printed multimodality imaging phantoms

Energy Technology Data Exchange (ETDEWEB)

Bieniosek, Matthew F. [Department of Electrical Engineering, Stanford University, 350 Serra Mall, Stanford, California 94305 (United States); Lee, Brian J. [Department of Mechanical Engineering, Stanford University, 440 Escondido Mall, Stanford, California 94305 (United States); Levin, Craig S., E-mail: cslevin@stanford.edu [Departments of Radiology, Physics, Bioengineering and Electrical Engineering, Stanford University, 300 Pasteur Dr., Stanford, California 94305-5128 (United States)

2015-10-15

Purpose: Imaging phantoms are important tools for researchers and technicians, but they can be costly and difficult to customize. Three dimensional (3D) printing is a widely available rapid prototyping technique that enables the fabrication of objects with 3D computer generated geometries. It is ideal for quickly producing customized, low cost, multimodal, reusable imaging phantoms. This work validates the use of 3D printed phantoms by comparing CT and PET scans of a 3D printed phantom and a commercial “Micro Deluxe” phantom. This report also presents results from a customized 3D printed PET/MRI phantom, and a customized high resolution imaging phantom with sub-mm features. Methods: CT and PET scans of a 3D printed phantom and a commercial Micro Deluxe (Data Spectrum Corporation, USA) phantom with 1.2, 1.6, 2.4, 3.2, 4.0, and 4.8 mm diameter hot rods were acquired. The measured PET and CT rod sizes, activities, and attenuation coefficients were compared. A PET/MRI scan of a custom 3D printed phantom with hot and cold rods was performed, with photon attenuation and normalization measurements performed with a separate 3D printed normalization phantom. X-ray transmission scans of a customized two level high resolution 3D printed phantom with sub-mm features were also performed. Results: Results show very good agreement between commercial and 3D printed micro deluxe phantoms with less than 3% difference in CT measured rod diameter, less than 5% difference in PET measured rod diameter, and a maximum of 6.2% difference in average rod activity from a 10 min, 333 kBq/ml (9 μCi/ml) Siemens Inveon (Siemens Healthcare, Germany) PET scan. In all cases, these differences were within the measurement uncertainties of our setups. PET/MRI scans successfully identified 3D printed hot and cold rods on PET and MRI modalities. X-ray projection images of a 3D printed high resolution phantom identified features as small as 350 μm wide. Conclusions: This work shows that 3D printed

Technical Note: Characterization of custom 3D printed multimodality imaging phantoms.

Science.gov (United States)

Bieniosek, Matthew F; Lee, Brian J; Levin, Craig S

2015-10-01

Imaging phantoms are important tools for researchers and technicians, but they can be costly and difficult to customize. Three dimensional (3D) printing is a widely available rapid prototyping technique that enables the fabrication of objects with 3D computer generated geometries. It is ideal for quickly producing customized, low cost, multimodal, reusable imaging phantoms. This work validates the use of 3D printed phantoms by comparing CT and PET scans of a 3D printed phantom and a commercial "Micro Deluxe" phantom. This report also presents results from a customized 3D printed PET/MRI phantom, and a customized high resolution imaging phantom with sub-mm features. CT and PET scans of a 3D printed phantom and a commercial Micro Deluxe (Data Spectrum Corporation, USA) phantom with 1.2, 1.6, 2.4, 3.2, 4.0, and 4.8 mm diameter hot rods were acquired. The measured PET and CT rod sizes, activities, and attenuation coefficients were compared. A PET/MRI scan of a custom 3D printed phantom with hot and cold rods was performed, with photon attenuation and normalization measurements performed with a separate 3D printed normalization phantom. X-ray transmission scans of a customized two level high resolution 3D printed phantom with sub-mm features were also performed. Results show very good agreement between commercial and 3D printed micro deluxe phantoms with less than 3% difference in CT measured rod diameter, less than 5% difference in PET measured rod diameter, and a maximum of 6.2% difference in average rod activity from a 10 min, 333 kBq/ml (9 μCi/ml) Siemens Inveon (Siemens Healthcare, Germany) PET scan. In all cases, these differences were within the measurement uncertainties of our setups. PET/MRI scans successfully identified 3D printed hot and cold rods on PET and MRI modalities. X-ray projection images of a 3D printed high resolution phantom identified features as small as 350 μm wide. This work shows that 3D printed phantoms can be functionally equivalent to

Medical knowledge packages and their integration into health-care information systems and the World Wide Web.

Science.gov (United States)

Adlassnig, Klaus-Peter; Rappelsberger, Andrea

2008-01-01

Software-based medical knowledge packages (MKPs) are packages of highly structured medical knowledge that can be integrated into various health-care information systems or the World Wide Web. They have been established to provide different forms of clinical decision support such as textual interpretation of combinations of laboratory rest results, generating diagnostic hypotheses as well as confirmed and excluded diagnoses to support differential diagnosis in internal medicine, or for early identification and automatic monitoring of hospital-acquired infections. Technically, an MKP may consist of a number of inter-connected Arden Medical Logic Modules. Several MKPs have been integrated thus far into hospital, laboratory, and departmental information systems. This has resulted in useful and widely accepted software-based clinical decision support for the benefit of the patient, the physician, and the organization funding the health care system.

Improving the printing quality of an inkjet printhead using MIMO model predictive control

NARCIS (Netherlands)

Ezzeldin Mahdy Abdelmonem, M.; Weiland, S.; Bosch, van den P.P.J.

2011-01-01

Drop-on-Demand inkjet printing is considered one of the most promising printing technologies that offers several advantages including high speed, quiet operation and compatibility with a variety of substrates. That makes it an important manufacturing technology serving a wide variety of markets.

WEB STRUCTURE MINING

Directory of Open Access Journals (Sweden)

CLAUDIA ELENA DINUCĂ

2011-01-01

Full Text Available The World Wide Web became one of the most valuable resources for information retrievals and knowledge discoveries due to the permanent increasing of the amount of data available online. Taking into consideration the web dimension, the users get easily lost in the web’s rich hyper structure. Application of data mining methods is the right solution for knowledge discovery on the Web. The knowledge extracted from the Web can be used to raise the performances for Web information retrievals, question answering and Web based data warehousing. In this paper, I provide an introduction of Web mining categories and I focus on one of these categories: the Web structure mining. Web structure mining, one of three categories of web mining for data, is a tool used to identify the relationship between Web pages linked by information or direct link connection. It offers information about how different pages are linked together to form this huge web. Web Structure Mining finds hidden basic structures and uses hyperlinks for more web applications such as web search.

A brief review of extrusion-based tissue scaffold bio-printing.

Science.gov (United States)

Ning, Liqun; Chen, Xiongbiao

2017-08-01

Extrusion-based bio-printing has great potential as a technique for manipulating biomaterials and living cells to create three-dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion-based bio-printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio-printing and manipulation of multiple materials and cells in bio-printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion-based bio-printing for scaffold fabrication, focusing on the prior-printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to-date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi-materials/cells manipulation, and process-induced cell damage in extrusion-based bio-printing. The key issue and challenges for extrusion-based bio-printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio-printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio-printing. The address of these challenges will significantly enhance the capability of extrusion-based bio-printing. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

3D Printing of Ball Grid Arrays

Science.gov (United States)

Sinha, Shayandev; Hines, Daniel; Dasgupta, Abhijit; Das, Siddhartha

Ball grid arrays (BGA) are interconnects between an integrated circuit (IC) and a printed circuit board (PCB), that are used for surface mounting electronic components. Typically, lead free alloys are used to make solder balls which, after a reflow process, establish a mechanical and electrical connection between the IC and the PCB. High temperature processing is required for most of these alloys leading to thermal shock causing damage to ICs. For producing flexible circuits on a polymer substrate, there is a requirement for low temperature processing capabilities (around 150 C) and for reducing strain from mechanical stresses. Additive manufacturing techniques can provide an alternative methodology for fabricating BGAs as a direct replacement for standard solder bumped BGAs. We have developed aerosol jet (AJ) printing methods to fabricate a polymer bumped BGA. As a demonstration of the process developed, a daisy chain test chip was polymer bumped using an AJ printed ultra violet (UV) curable polymer ink that was then coated with an AJ printed silver nanoparticle laden ink as a conducting layer printed over the polymer bump. The structure for the balls were achieved by printing the polymer ink using a specific toolpath coupled with in-situ UV curing of the polymer which provided good control over the shape, resulting in well-formed spherical bumps on the order of 200 um wide by 200 um tall for this initial demonstration. A detailed discussion of the AJ printing method and results from accelerated life-time testing will be presented

Spectral properties of the Google matrix of the World Wide Web and other directed networks.

Science.gov (United States)

Georgeot, Bertrand; Giraud, Olivier; Shepelyansky, Dima L

2010-05-01

We study numerically the spectrum and eigenstate properties of the Google matrix of various examples of directed networks such as vocabulary networks of dictionaries and university World Wide Web networks. The spectra have gapless structure in the vicinity of the maximal eigenvalue for Google damping parameter α equal to unity. The vocabulary networks have relatively homogeneous spectral density, while university networks have pronounced spectral structures which change from one university to another, reflecting specific properties of the networks. We also determine specific properties of eigenstates of the Google matrix, including the PageRank. The fidelity of the PageRank is proposed as a characterization of its stability.

Historical Quantitative Reasoning on the Web

NARCIS (Netherlands)

Meroño-Peñuela, A.; Ashkpour, A.

2016-01-01

The Semantic Web is an extension of the Web through standards by the World Wide Web Consortium (W3C) [4]. These standards promote common data formats and exchange protocols on the Web, most fundamentally the Resource Description Framework (RDF). Its ultimate goal is to make the Web a suitable data

3D inkjet printed flexible and wearable antenna systems

KAUST Repository

Shamim, Atif

2017-12-22

With the advent of wearable sensors and internet of things (IoT), there is a new focus on electronics which can be bent so that they can be worn or mounted on non-planar objects. Moreover, there is a requirement that these electronics become extremely low cost, to the extent that they become disposable. The flexible and low cost aspects can be addressed by adapting additive manufacturing technologies such as inkjet printing and 3D printing. This paper presents inkjet printing as an emerging new technique to realize low cost, flexible and wearable antenna systems. The ability of inkjet printing to realize electronics on unconventional mediums such as plastics, papers, and textiles has opened up a plethora of new applications. A variety of antennas such as wide-band, multiband, and wearable, etc, which have been realized through additive manufacturing techniques are shown. Many system level examples are also shown, primarily for wireless sensing applications. The promising results of these designs indicate that the day when electronics can be printed like newspapers and magazines through roll-to-roll and reel-to-reel printing is not far away.

Stochastic analysis of web page ranking

NARCIS (Netherlands)

Volkovich, Y.

2009-01-01

Today, the study of the World Wide Web is one of the most challenging subjects. In this work we consider the Web from a probabilistic point of view. We analyze the relations between various characteristics of the Web. In particular, we are interested in the Web properties that affect the Web page

Personalizing Web Search based on User Profile

OpenAIRE

Utage, Sharyu; Ahire, Vijaya

2016-01-01

Web Search engine is most widely used for information retrieval from World Wide Web. These Web Search engines help user to find most useful information. When different users Searches for same information, search engine provide same result without understanding who is submitted that query. Personalized web search it is search technique for proving useful result. This paper models preference of users as hierarchical user profiles. a framework is proposed called UPS. It generalizes profile and m...

Digital Textile Printing

OpenAIRE

Moltchanova, Julia

2011-01-01

Rapidly evolving technology of digital printing opens new opportunities on many markets. One of them is the printed fabric market where printing companies as well as clients benefit from new printing methods. This thesis focuses on the digital textile printing technology and its implementation for fabric-on-demand printing service in Finland. The purpose of this project was to study the technology behind digital textile printing, areas of application of this technology, the requirements ...

Conductive silver ink printing through the laser-induced forward transfer technique

Science.gov (United States)

Florian, C.; Caballero-Lucas, F.; Fernández-Pradas, J. M.; Artigas, R.; Ogier, S.; Karnakis, D.; Serra, P.

2015-05-01

Laser induced forward transfer (LIFT) is a technique which allows printing a wide variety of materials. It presents several advantages over inkjet printing, such as a potentially higher resolution, being free from clogging issues, and the possibility to work with a much broader range of viscosities. LIFT appears, therefore, as an interesting alternative in all those fields where miniaturization is a major requirement, as in the microelectronics industry. The fabrication of electronic devices requires the printing of small, narrow and thin conductive lines, and in this work we investigate the printing of continuous lines of conductive silver ink on glass substrates through LIFT. Lines are initially formed through sequentially printing adjacent droplets with different overlaps. We show that above a certain overlap continuous lines can be obtained, but unfortunately they show bulging, a problem which compromises the functionality of the lines. In order to solve the problem, other printing strategies are tested; they consist in printing adjacent droplets in alternate sequences. It is found that the alternate printing of two overlapping sets of droplets with an intermediate drying step allows obtaining functional continuous lines without bulging.

A laser printing based approach for printed electronics

Energy Technology Data Exchange (ETDEWEB)

Zhang, T.; Hu, M.; Guo, Q.; Zhang, W.; Yang, J., E-mail: jyang@eng.uwo.ca [Department of Mechanical and Materials Engineering, Western University, London N6A 3K7 (Canada); Liu, Y.; Lau, W. [Chengdu Green Energy and Green Manufacturing Technology R& D Center, 355 Tengfei Road, 620107 Chengdu (China); Wang, X. [Department of Mechanical and Materials Engineering, Western University, London N6A 3K7 (Canada); Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2016-03-07

Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

A laser printing based approach for printed electronics

International Nuclear Information System (INIS)

Zhang, T.; Hu, M.; Guo, Q.; Zhang, W.; Yang, J.; Liu, Y.; Lau, W.; Wang, X.

2016-01-01

Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

Reliability, compliance, and security in web-based course assessments

Directory of Open Access Journals (Sweden)

Scott Bonham

2008-04-01

Full Text Available Pre- and postcourse assessment has become a very important tool for education research in physics and other areas. The web offers an attractive alternative to in-class paper administration, but concerns about web-based administration include reliability due to changes in medium, student compliance rates, and test security, both question leakage and utilization of web resources. An investigation was carried out in introductory astronomy courses comparing pre- and postcourse administration of assessments using the web and on paper. Overall no difference was seen in performance due to the medium. Compliance rates fluctuated greatly, and factors that seemed to produce higher rates are identified. Notably, email reminders increased compliance by 20%. Most of the 559 students complied with requests to not copy, print, or save questions nor use web resources; about 1% did copy some question text and around 2% frequently used other windows or applications while completing the assessment.

Promoting Your Web Site.

Science.gov (United States)

Raeder, Aggi

1997-01-01

Discussion of ways to promote sites on the World Wide Web focuses on how search engines work and how they retrieve and identify sites. Appropriate Web links for submitting new sites and for Internet marketing are included. (LRW)

Using the World Wide Web to Connect Research and Professional Practice: Towards Evidence-Based Practice

Directory of Open Access Journals (Sweden)

Daniel L. Moody

2003-01-01

Full Text Available In most professional (applied disciplines, research findings take a long time to filter into practice, if they ever do at all. The result of this is under-utilisation of research results and sub-optimal practices. There are a number of reasons for the lack of knowledge transfer. On the "demand side", people working in professional practice have little time available to keep up with the latest research in their field. In addition, the volume of research published each year means that the average practitioner would not have time to read all the research articles in their area of interest even if they devoted all their time to it. From the "supply side", academic research is primarily focused on the production rather than distribution of knowledge. While they have highly developed mechanisms for transferring knowledge among themselves, there is little investment in the distribution of research results be-yond research communities. The World Wide Web provides a potential solution to this problem, as it provides a global information infrastructure for connecting those who produce knowledge (researchers and those who need to apply this knowledge (practitioners. This paper describes two projects which use the World Wide Web to make research results directly available to support decision making in the workplace. The first is a successful knowledge management project in a health department which provides medical staff with on-line access to the latest medical research at the point of care. The second is a project currently in progress to implement a similar system to support decision making in IS practice. Finally, we draw some general lessons about how to improve transfers of knowledge from research and practice, which could be applied in any discipline.

AstroWeb -- Internet Resources for Astronomers

Science.gov (United States)

Jackson, R. E.; Adorf, H.-M.; Egret, D.; Heck, A.; Koekemoer, A.; Murtagh, F.; Wells, D. C.

AstroWeb is a World Wide Web (WWW) interface to a collection of Internet accessible resources aimed at the astronomical community. The collection currently contains more than 1000 WWW, Gopher, Wide Area Information System (WAIS), Telnet, and Anonymous FTP resources, and it is still growing. AstroWeb provides the additional value-added services: categorization of each resource; descriptive paragraphs for some resources; searchable index of all resource information; 3 times daily search for ``dead'' or ``unreliable'' resources.

Obtaining Streamflow Statistics for Massachusetts Streams on the World Wide Web

Science.gov (United States)

Ries, Kernell G.; Steeves, Peter A.; Freeman, Aleda; Singh, Raj

2000-01-01

A World Wide Web application has been developed to make it easy to obtain streamflow statistics for user-selected locations on Massachusetts streams. The Web application, named STREAMSTATS (available at http://water.usgs.gov/osw/streamstats/massachusetts.html ), can provide peak-flow frequency, low-flow frequency, and flow-duration statistics for most streams in Massachusetts. These statistics describe the magnitude (how much), frequency (how often), and duration (how long) of flow in a stream. The U.S. Geological Survey (USGS) has published streamflow statistics, such as the 100-year peak flow, the 7-day, 10-year low flow, and flow-duration statistics, for its data-collection stations in numerous reports. Federal, State, and local agencies need these statistics to plan and manage use of water resources and to regulate activities in and around streams. Engineering and environmental consulting firms, utilities, industry, and others use the statistics to design and operate water-supply systems, hydropower facilities, industrial facilities, wastewater treatment facilities, and roads, bridges, and other structures. Until now, streamflow statistics for data-collection stations have often been difficult to obtain because they are scattered among many reports, some of which are not readily available to the public. In addition, streamflow statistics are often needed for locations where no data are available. STREAMSTATS helps solve these problems. STREAMSTATS was developed jointly by the USGS and MassGIS, the State Geographic Information Systems (GIS) agency, in cooperation with the Massachusetts Departments of Environmental Management and Environmental Protection. The application consists of three major components: (1) a user interface that displays maps and allows users to select stream locations for which they want streamflow statistics (fig. 1), (2) a data base of previously published streamflow statistics and descriptive information for 725 USGS data

Roll-coating fabrication of ITO-free flexible solar cells based on a non-fullerene small molecule acceptor

DEFF Research Database (Denmark)

Liu, Wenqing; Shi, Hangqi; Andersen, Thomas Rieks

2015-01-01

We report organic solar cells (OSCs) with non-fullerene small molecule acceptors (SMAs) prepared in large area via a roll coating process. We employ all solution-processed indium tin oxide (ITO)-free flexible substrates for inverted solar cells with a new SMA of F(DPP)(2)B-2. By utilizing poly(3......-hexylthiophene) as donor blended with F(DPP)(2)B-2 as acceptor, ITO-free large-area flexible SMA based OSCs were produced under ambient conditions with the use of slot-die coating and flexographic printing methods on a lab-scale compact roll-coater that is readily transferrable to roll-to-roll processing...

The Semantic Web in Teacher Education

Science.gov (United States)

Czerkawski, Betül Özkan

2014-01-01

The Semantic Web enables increased collaboration among computers and people by organizing unstructured data on the World Wide Web. Rather than a separate body, the Semantic Web is a functional extension of the current Web made possible by defining relationships among websites and other online content. When explicitly defined, these relationships…

Dynamic Interactive Educational Diabetes Simulations Using the World Wide Web: An Experience of More Than 15 Years with AIDA Online.

Science.gov (United States)

Lehmann, Eldon D; Dewolf, Dennis K; Novotny, Christopher A; Reed, Karen; Gotwals, Robert R

2014-01-01

Background. AIDA is a widely available downloadable educational simulator of glucose-insulin interaction in diabetes. Methods. A web-based version of AIDA was developed that utilises a server-based architecture with HTML FORM commands to submit numerical data from a web-browser client to a remote web server. AIDA online, located on a remote server, passes the received data through Perl scripts which interactively produce 24 hr insulin and glucose simulations. Results. AIDA online allows users to modify the insulin regimen and diet of 40 different prestored "virtual diabetic patients" on the internet or create new "patients" with user-generated regimens. Multiple simulations can be run, with graphical results viewed via a standard web-browser window. To date, over 637,500 diabetes simulations have been run at AIDA online, from all over the world. Conclusions. AIDA online's functionality is similar to the downloadable AIDA program, but the mode of implementation and usage is different. An advantage to utilising a server-based application is the flexibility that can be offered. New modules can be added quickly to the online simulator. This has facilitated the development of refinements to AIDA online, which have instantaneously become available around the world, with no further local downloads or installations being required.

Dynamic Interactive Educational Diabetes Simulations Using the World Wide Web: An Experience of More Than 15 Years with AIDA Online

Science.gov (United States)

Lehmann, Eldon D.; DeWolf, Dennis K.; Novotny, Christopher A.; Reed, Karen; Gotwals, Robert R.

2014-01-01

Background. AIDA is a widely available downloadable educational simulator of glucose-insulin interaction in diabetes. Methods. A web-based version of AIDA was developed that utilises a server-based architecture with HTML FORM commands to submit numerical data from a web-browser client to a remote web server. AIDA online, located on a remote server, passes the received data through Perl scripts which interactively produce 24 hr insulin and glucose simulations. Results. AIDA online allows users to modify the insulin regimen and diet of 40 different prestored “virtual diabetic patients” on the internet or create new “patients” with user-generated regimens. Multiple simulations can be run, with graphical results viewed via a standard web-browser window. To date, over 637,500 diabetes simulations have been run at AIDA online, from all over the world. Conclusions. AIDA online's functionality is similar to the downloadable AIDA program, but the mode of implementation and usage is different. An advantage to utilising a server-based application is the flexibility that can be offered. New modules can be added quickly to the online simulator. This has facilitated the development of refinements to AIDA online, which have instantaneously become available around the world, with no further local downloads or installations being required. PMID:24511312

The best printing methods to print satellite images

Directory of Open Access Journals (Sweden)

G.A. Yousif

2011-12-01

In this paper different printing systems were used to print an image of SPOT-4 satellite, caver part of Sharm Elshekh area, Sinai, Egypt, on the same type of paper as much as possible, especially in the photography. This step is followed by measuring the experimental data, and analyzed colors to determine the best printing systems for satellite image printing data. The laser system is the more printing system where produce a wider range of color and highest densities of ink and access much color detail. Followed by the offset system which it recorded the best dot gain. Moreover, the study shows that it can use the advantages of each method according to the satellite image color and quantity to be produced.

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges.

Science.gov (United States)

Alhnan, Mohamed A; Okwuosa, Tochukwu C; Sadia, Muzna; Wan, Ka-Wai; Ahmed, Waqar; Arafat, Basel

2016-08-01

The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such an extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry.

Engineering Web Applications

DEFF Research Database (Denmark)

Casteleyn, Sven; Daniel, Florian; Dolog, Peter

Nowadays, Web applications are almost omnipresent. The Web has become a platform not only for information delivery, but also for eCommerce systems, social networks, mobile services, and distributed learning environments. Engineering Web applications involves many intrinsic challenges due...... to their distributed nature, content orientation, and the requirement to make them available to a wide spectrum of users who are unknown in advance. The authors discuss these challenges in the context of well-established engineering processes, covering the whole product lifecycle from requirements engineering through...... design and implementation to deployment and maintenance. They stress the importance of models in Web application development, and they compare well-known Web-specific development processes like WebML, WSDM and OOHDM to traditional software development approaches like the waterfall model and the spiral...

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

OpenAIRE

Hinton, Thomas J.; Hudson, Andrew; Pusch, Kira; Lee, Andrew; Feinberg, Adam W.

2016-01-01

Polydimethylsiloxane (PDMS) elastomer is used in a wide range of biomaterial applications including microfluidics, cell culture substrates, flexible electronics, and medical devices. However, it has proved challenging to 3D print PDMS in complex structures due to its low elastic modulus and need for support during the printing process. Here we demonstrate the 3D printing of hydrophobic PDMS prepolymer resins within a hydrophilic Carbopol gel support via freeform reversible embedding (FRE). In...

Engineering semantic web information systems in Hera

NARCIS (Netherlands)

Vdovják, R.; Frasincar, F.; Houben, G.J.P.M.; Barna, P.

2003-01-01

The success of the World Wide Web has caused the concept of information system to change. Web Information Systems (WIS) use from the Web its paradigm and technologies in order to retrieve information from sources on the Web, and to present the information in terms of a Web or hypermedia

Women, pharmacy and the World Wide Web: could they be the answer to the obesity epidemic?

Science.gov (United States)

Fakih, Souhiela; Hussainy, Safeera; Marriott, Jennifer

2014-04-01

The objective of this article is to explore how giving women access to evidence-based information in weight management through pharmacies, and by utilising the World Wide Web, is a much needed step towards dealing with the obesity crisis. Women's needs should be considered when developing evidence-based information on weight. Excess weight places them at high risk of diabetes and cardiovascular disease, infertility and complications following pregnancy and giving birth. Women are also an important population group because they influence decision-making around meal choices for their families and are the biggest consumers of weight-loss products, many of which can be purchased in pharmacies. Pharmacies are readily accessible primary healthcare locations and given the pharmacist's expertise in being able to recognise underlying causes of obesity (e.g. medications, certain disease states), pharmacies are an ideal location to provide women with evidence-based information on all facets of weight management. Considering the exponential rise in the use of the World Wide Web, this information could be delivered as an online educational resource supported by other flexible formats. The time has come for the development of an online, evidence-based educational resource on weight management, which is combined with other flexible formats and targeted at women in general and according to different phases of their lives (pregnancy, post-partum, menopause). By empowering women with this knowledge it will allow them and their families to take better control of their health and wellbeing, and it may just be the much needed answer to complement already existing resources to help curb the obesity epidemic. © 2013 Royal Pharmaceutical Society.

Development of a web based GIS for health facilities mapping ...

African Journals Online (AJOL)

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

CERN's web application updates for electron and laser beam technologies

CERN Document Server

Sigas, Christos

2017-01-01

This report describes the modifications at CERN's web application for electron and laser beam technologies. There are updates at both the front and the back end of the application. New electron and laser machines were added and also old machines were updated. There is also a new feature for printing needed information.

Web Security, Privacy & Commerce

CERN Document Server

Garfinkel, Simson

2011-01-01

Since the first edition of this classic reference was published, World Wide Web use has exploded and e-commerce has become a daily part of business and personal life. As Web use has grown, so have the threats to our security and privacy--from credit card fraud to routine invasions of privacy by marketers to web site defacements to attacks that shut down popular web sites. Web Security, Privacy & Commerce goes behind the headlines, examines the major security risks facing us today, and explains how we can minimize them. It describes risks for Windows and Unix, Microsoft Internet Exp

XML and Better Web Searching.

Science.gov (United States)

Jackson, Joe; Gilstrap, Donald L.

1999-01-01

Addresses the implications of the new Web metalanguage XML for searching on the World Wide Web and considers the future of XML on the Web. Compared to HTML, XML is more concerned with structure of data than documents, and these data structures should prove conducive to precise, context rich searching. (Author/LRW)

60. The World-Wide Inaccessible Web, Part 1: Browsing

Science.gov (United States)

Baggaley, Jon; Batpurev, Batchuluun

2007-01-01

Two studies are reported, comparing the browser loading times of webpages created using common Web development techniques. The loading speeds were estimated in 12 Asian countries by members of the "PANdora" network, funded by the International Development Research Centre (IDRC) to conduct collaborative research in the development of…

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

OpenAIRE

Albed Alhnan, Mohamed; Okwuosa, Tochukwu; Sadia, Muzna; Wan, Ka-Wai; Ahmed, Waqar; Arafat, Basel

2016-01-01

The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such as extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet...

3D-PRINTING OF BUILD OBJECTS

Directory of Open Access Journals (Sweden)

SAVYTSKYI M. V.

2016-03-01

Full Text Available Raising of problem. Today, in all spheres of our life we can constate the permanent search for new, modern methods and technologies that meet the principles of sustainable development. New approaches need to be, on the one hand more effective in terms of conservation of exhaustible resources of our planet, have minimal impact on the environment and on the other hand to ensure a higher quality of the final product. Construction is not exception. One of the new promising technology is the technology of 3D -printing of individual structures and buildings in general. 3Dprinting - is the process of real object recreating on the model of 3D. Unlike conventional printer which prints information on a sheet of paper, 3D-printer allows you to display three-dimensional information, i.e. creates certain physical objects. Currently, 3D-printer finds its application in many areas of production: machine building elements, a variety of layouts, interior elements, various items. But due to the fact that this technology is fairly new, it requires the creation of detailed and accurate technologies, efficient equipment and materials, and development of common vocabulary and regulatory framework in this field. Research Aim. The analysis of existing methods of creating physical objects using 3D-printing and the improvement of technology and equipment for the printing of buildings and structures. Conclusion. 3D-printers building is a new generation of equipment for the construction of buildings, structures, and structural elements. A variety of building printing technics opens up wide range of opportunities in the construction industry. At this stage, printers design allows to create low-rise buildings of different configurations with different mortars. The scientific novelty of this work is to develop proposals to improve the thermal insulation properties of constructed 3D-printing objects and technological equipment. The list of key terms and notions of construction

Capataz: a framework for distributing algorithms via the World Wide Web

Directory of Open Access Journals (Sweden)

Gonzalo J. Martínez

2015-08-01

Full Text Available In recent years, some scientists have embraced the distributed computing paradigm. As experiments and simulations demand ever more computing power, coordinating the efforts of many different processors is often the only reasonable resort. We developed an open-source distributed computing framework based on web technologies, and named it Capataz. Acting as an HTTP server, web browsers running on many different devices can connect to it to contribute in the execution of distributed algorithms written in Javascript. Capataz takes advantage of architectures with many cores using web workers. This paper presents an improvement in Capataz´ usability and why it was needed. In previous experiments the total time of distributed algorithms proved to be susceptible to changes in the execution time of the jobs. The system now adapts by bundling jobs together if they are too simple. The computational experiment to test the solution is a brute force estimation of pi. The benchmark results show that by bundling jobs, the overall perfomance is greatly increased.

Digital printing

Science.gov (United States)

Sobotka, Werner K.

1997-02-01

Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

Numerical models for printing and coating flows

CERN Document Server

Gethin, DT

2002-01-01

This issue brings together a number of papers under the theme of thin filmflows that are generic to printing and a wide range of coating applications.These processes require the deposition of a thin layer of fluid (or polymer) ontoa substrate. The simulation of these processes presents a number of numericalchallenges.

The Atlas of Chinese World Wide Web Ecosystem Shaped by the Collective Attention Flows.

Science.gov (United States)

Lou, Xiaodan; Li, Yong; Gu, Weiwei; Zhang, Jiang

2016-01-01

The web can be regarded as an ecosystem of digital resources connected and shaped by collective successive behaviors of users. Knowing how people allocate limited attention on different resources is of great importance. To answer this, we embed the most popular Chinese web sites into a high dimensional Euclidean space based on the open flow network model of a large number of Chinese users' collective attention flows, which both considers the connection topology of hyperlinks between the sites and the collective behaviors of the users. With these tools, we rank the web sites and compare their centralities based on flow distances with other metrics. We also study the patterns of attention flow allocation, and find that a large number of web sites concentrate on the central area of the embedding space, and only a small fraction of web sites disperse in the periphery. The entire embedding space can be separated into 3 regions(core, interim, and periphery). The sites in the core (1%) occupy a majority of the attention flows (40%), and the sites (34%) in the interim attract 40%, whereas other sites (65%) only take 20% flows. What's more, we clustered the web sites into 4 groups according to their positions in the space, and found that similar web sites in contents and topics are grouped together. In short, by incorporating the open flow network model, we can clearly see how collective attention allocates and flows on different web sites, and how web sites connected each other.

The Atlas of Chinese World Wide Web Ecosystem Shaped by the Collective Attention Flows

Science.gov (United States)

Lou, Xiaodan; Li, Yong; Gu, Weiwei; Zhang, Jiang

2016-01-01

The web can be regarded as an ecosystem of digital resources connected and shaped by collective successive behaviors of users. Knowing how people allocate limited attention on different resources is of great importance. To answer this, we embed the most popular Chinese web sites into a high dimensional Euclidean space based on the open flow network model of a large number of Chinese users’ collective attention flows, which both considers the connection topology of hyperlinks between the sites and the collective behaviors of the users. With these tools, we rank the web sites and compare their centralities based on flow distances with other metrics. We also study the patterns of attention flow allocation, and find that a large number of web sites concentrate on the central area of the embedding space, and only a small fraction of web sites disperse in the periphery. The entire embedding space can be separated into 3 regions(core, interim, and periphery). The sites in the core (1%) occupy a majority of the attention flows (40%), and the sites (34%) in the interim attract 40%, whereas other sites (65%) only take 20% flows. What’s more, we clustered the web sites into 4 groups according to their positions in the space, and found that similar web sites in contents and topics are grouped together. In short, by incorporating the open flow network model, we can clearly see how collective attention allocates and flows on different web sites, and how web sites connected each other. PMID:27812133

A Review of Current Clinical Applications of Three-Dimensional Printing in Spine Surgery.

Science.gov (United States)

Cho, Woojin; Job, Alan Varkey; Chen, Jing; Baek, Jung Hwan

2018-02-01

Three-dimensional (3D) printing is a transformative technology with a potentially wide range of applications in the field of orthopaedic spine surgery. This article aims to review the current applications, limitations, and future developments of 3D printing technology in orthopaedic spine surgery. Current preoperative applications of 3D printing include construction of complex 3D anatomic models for improved visual understanding, preoperative surgical planning, and surgical simulations for resident education. Intraoperatively, 3D printers have been successfully used in surgical guidance systems and in the creation of patient specific implantable devices. Furthermore, 3D printing is revolutionizing the field of regenerative medicine and tissue engineering, allowing construction of biocompatible scaffolds suitable for cell growth and vasculature. Advances in printing technology and evidence of positive clinical outcomes are needed before there is an expansion of 3D printing applied to the clinical setting.

Object Lessons: Material Culture on the World Wide Web.

Science.gov (United States)

Mires, Charlene

2001-01-01

Describes the content of a course on material culture for undergraduate students that was separated into two sections: (1) first students read books and analyzed artifacts; and (2) then the class explored the Centennial Exhibition held in Philadelphia (Pennsylvania) in 1876, applying material culture methods and constructing a Web site from their…

TMFoldWeb: a web server for predicting transmembrane protein fold class.

Science.gov (United States)

Kozma, Dániel; Tusnády, Gábor E

2015-09-17

Here we present TMFoldWeb, the web server implementation of TMFoldRec, a transmembrane protein fold recognition algorithm. TMFoldRec uses statistical potentials and utilizes topology filtering and a gapless threading algorithm. It ranks template structures and selects the most likely candidates and estimates the reliability of the obtained lowest energy model. The statistical potential was developed in a maximum likelihood framework on a representative set of the PDBTM database. According to the benchmark test the performance of TMFoldRec is about 77 % in correctly predicting fold class for a given transmembrane protein sequence. An intuitive web interface has been developed for the recently published TMFoldRec algorithm. The query sequence goes through a pipeline of topology prediction and a systematic sequence to structure alignment (threading). Resulting templates are ordered by energy and reliability values and are colored according to their significance level. Besides the graphical interface, a programmatic access is available as well, via a direct interface for developers or for submitting genome-wide data sets. The TMFoldWeb web server is unique and currently the only web server that is able to predict the fold class of transmembrane proteins while assigning reliability scores for the prediction. This method is prepared for genome-wide analysis with its easy-to-use interface, informative result page and programmatic access. Considering the info-communication evolution in the last few years, the developed web server, as well as the molecule viewer, is responsive and fully compatible with the prevalent tablets and mobile devices.

Decal electronics for printed high performance cmos electronic systems

KAUST Repository

Hussain, Muhammad Mustafa

2017-11-23

High performance complementary metal oxide semiconductor (CMOS) electronics are critical for any full-fledged electronic system. However, state-of-the-art CMOS electronics are rigid and bulky making them unusable for flexible electronic applications. While there exist bulk material reduction methods to flex them, such thinned CMOS electronics are fragile and vulnerable to handling for high throughput manufacturing. Here, we show a fusion of a CMOS technology compatible fabrication process for flexible CMOS electronics, with inkjet and conductive cellulose based interconnects, followed by additive manufacturing (i.e. 3D printing based packaging) and finally roll-to-roll printing of packaged decal electronics (thin film transistors based circuit components and sensors) focusing on printed high performance flexible electronic systems. This work provides the most pragmatic route for packaged flexible electronic systems for wide ranging applications.

Powder-based 3D printing application for geomechanical testing

Science.gov (United States)

Williams, M.; Yoon, H.; Choens, R. C., II; Martinez, M. J.; Dewers, T. A.; Lee, M.

2017-12-01

3D printing of fractured and porous analog geomaterials has the potential to enhance hydrogeological and mechanical interpretations by generating engineered samples in testable configurations with reproducible microstructures and tunable surface and mechanical properties. For geoscience applications, 3D printing technology can be co-opted to print reproducible structures derived from CT-imaging of actual rocks and theoretical algorithms. In particular, the use of 3D printed samples allows us to overcome sample-to-sample heterogeneity that plague rock physics testing and to test material response independent from material variability. In this work, gypsum powder-based 3D printing was used to print cylindrical core samples and block samples with a pre-existing flaw geometry. All samples are printed in three different directions to evaluate the impact of printing direction on mechanical properties. For the cylindrical samples, unconfined compression testing has been performed. For compressive strength, the samples printed perpendicular to the loading direction show stronger than those printed parallel to the loading and at 45 degree. Micro-CT images of the printed samples reveal the uneven spreading of binder, resulting in soft inner core surrounded by stronger outer shell. In particular, the layered feature with binder causes the strong anisotropic properties. This was also confirmed by the wave velocity. For the small block samples ( 6.1cm wide, 10cm high, and 1.25cm thick) with an inclined flaw, uniaxial tests coupled with an array of acoustic emission sensors and digital image correlation revealed that cracks were developed at/near the tip of flaw as expected. Although acoustic events were detected, localization was not detectable mainly due to strong attenuation. Advantage and disadvantage of power-based 3D printing for mechanical testing will be discussed and a few attempts will be presented to improve the applicability of powder-based printing technique. Sandia

Fatigue Characteristics of 3D Printed Acrylonitrile Butadiene Styrene (ABS)

Science.gov (United States)

Padzi, M. M.; Bazin, M. M.; Muhamad, W. M. W.

2017-11-01

Recently, the use of 3D printer technology has become significant to industries, especially when involving the new product development. 3D printing is a technology, which produces the 3D product or prototype using a layer-by-layer technique. However, there becomes less research on the mechanical performance of the 3D printed component. In the present work, fatigue characteristics of 3D printed specimen have been studied. Acrylonitrile butadiene styrene (ABS) has been chosen as a material research due to its wide applications. Two types of specimen used, which is the 3D printing and moulding specimens. Fused deposition modelling (FDM) technique was used to produce the specimens. The dog bone shape part was produced based on ASTM D638 standard and the tensile test has been carried out to get the mechanical properties. Fatigue test was carried out at 40%, 60% and 80% of the tensile strength. The moulded part shows higher fatigue cycles compared to 3D printed part for all loading percentages. Fatigue lives for 40%, 60% and 80%, were 911, 2645 and 26948 cycles, respectively. The results indicated that 3D printed part has a lower fatigue life, which may not suitable for industrial applications. However, the 3D printed part could be improved by using various parameters and may be introduced in low strength application.

Laser printing of 3D metallic interconnects

Science.gov (United States)

Beniam, Iyoel; Mathews, Scott A.; Charipar, Nicholas A.; Auyeung, Raymond C. Y.; Piqué, Alberto

2016-04-01

The use of laser-induced forward transfer (LIFT) techniques for the printing of functional materials has been demonstrated for numerous applications. The printing gives rise to patterns, which can be used to fabricate planar interconnects. More recently, various groups have demonstrated electrical interconnects from laser-printed 3D structures. The laser printing of these interconnects takes place through aggregation of voxels of either molten metal or of pastes containing dispersed metallic particles. However, the generated 3D structures do not posses the same metallic conductivity as a bulk metal interconnect of the same cross-section and length as those formed by wire bonding or tab welding. An alternative is to laser transfer entire 3D structures using a technique known as lase-and-place. Lase-and-place is a LIFT process whereby whole components and parts can be transferred from a donor substrate onto a desired location with one single laser pulse. This paper will describe the use of LIFT to laser print freestanding, solid metal foils or beams precisely over the contact pads of discrete devices to interconnect them into fully functional circuits. Furthermore, this paper will also show how the same laser can be used to bend or fold the bulk metal foils prior to transfer, thus forming compliant 3D structures able to provide strain relief for the circuits under flexing or during motion from thermal mismatch. These interconnect "ridges" can span wide gaps (on the order of a millimeter) and accommodate height differences of tens of microns between adjacent devices. Examples of these laser printed 3D metallic bridges and their role in the development of next generation electronics by additive manufacturing will be presented.

Digital Inkjet Textile Printing

OpenAIRE

Wang, Meichun

2017-01-01

Digital inkjet textile printing is an emerging technology developed with the rise of the digital world. It offers a possibility to print high-resolution images with unlimited color selection on fabrics. Digital inkjet printing brings a revolutionary chance for the textile printing industry. The history of textile printing shows the law how new technology replaces the traditional way of printing. This indicates the future of digital inkjet textile printing is relatively positive. Differen...

Ten years for the public Web

CERN Multimedia

2003-01-01

Ten years ago, CERN issued a statement declaring that a little known piece of software called the World Wide Web was in the public domain. Nowadays, the Web is an indispensable part of modern communications. The idea for the Web goes back to March 1989 when CERN Computer scientist Tim Berners-Lee wrote a proposal for a 'Distributed Information Management System' for the high-energy physics community. The Web was originaly conceived and developed to meet the demand for information sharing between scientists working all over the world. There were many obstacles in the 1980s to the effective exchange of information. There was, for example a great variety of computer and network systems, with hardly any common features. The main purpose of the web was to allow scientists to access information from any source in a consistent and simple way. By Christmas 1990, Berners-Lee's idea had become the World Wide Web, with its first server and browser running at CERN. Through 1991, the Web spread to other particle physics ...

Use of Web 2.0 applications in product development: an empirical ...

African Journals Online (AJOL)

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Perception on Adoption and Application of Web 2.0 Technologies in ...

African Journals Online (AJOL)

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

3D printed components with ultrasonically arranged microscale structure

Science.gov (United States)

Llewellyn-Jones, Thomas M.; Drinkwater, Bruce W.; Trask, Richard S.

2016-02-01

This paper shows the first application of in situ manipulation of discontinuous fibrous structure mid-print, within a 3D printed polymeric composite architecture. Currently, rapid prototyping methods (fused filament fabrication, stereolithography) are gaining increasing popularity within the engineering commnity to build structural components. Unfortunately, the full potential of these components is limited by the mechanical properties of the materials used. The aim of this study is to create and demonstrate a novel method to instantaneously orient micro-scale glass fibres within a selectively cured photocurable resin system, using ultrasonic forces to align the fibres in the desired 3D architecture. To achieve this we have mounted a switchable, focused laser module on the carriage of a three-axis 3D printing stage, above an in-house ultrasonic alignment rig containing a mixture of photocurable resin and discontinuous 14 μm diameter glass fibre reinforcement(50 μm length). In our study, a suitable print speed of 20 mm s-1 was used, which is comparable to conventional additive layer techniques. We show the ability to construct in-plane orthogonally aligned sections printed side by side, where the precise orientation of the configurations is controlled by switching the ultrasonic standing wave profile mid-print. This approach permits the realisation of complex fibrous architectures within a 3D printed landscape. The versatile nature of the ultrasonic manipulation technique also permits a wide range of particle types (diameters, aspect ratios and functions) and architectures (in-plane, and out-plane) to be patterned, leading to the creation of a new generation of fibrous reinforced composites for 3D printing.

Caught in the Web

Energy Technology Data Exchange (ETDEWEB)

Gillies, James

1995-06-15

The World-Wide Web may have taken the Internet by storm, but many people would be surprised to learn that it owes its existence to CERN. Around half the world's particle physicists come to CERN for their experiments, and the Web is the result of their need to share information quickly and easily on a global scale. Six years after Tim Berners-Lee's inspired idea to marry hypertext to the Internet in 1989, CERN is handing over future Web development to the World-Wide Web Consortium, run by the French National Institute for Research in Computer Science and Control, INRIA, and the Laboratory for Computer Science of the Massachusetts Institute of Technology, MIT, leaving itself free to concentrate on physics. The Laboratory marked this transition with a conference designed to give a taste of what the Web can do, whilst firmly stamping it with the label ''Made in CERN''. Over 200 European journalists and educationalists came to CERN on 8 - 9 March for the World-Wide Web Days, resulting in wide media coverage. The conference was opened by UK Science Minister David Hunt who stressed the importance of fundamental research in generating new ideas. ''Who could have guessed 10 years ago'', he said, ''that particle physics research would lead to a communication system which would allow every school to have the biggest library in the world in a single computer?''. In his introduction, the Minister also pointed out that ''CERN and other basic research laboratories help to break new technological ground and sow the seeds of what will become mainstream manufacturing in the future.'' Learning the jargon is often the hardest part of coming to grips with any new invention, so CERN put it at the top of the agenda. Jacques Altaber, who helped introduce the Internet to CERN in the early 1980s, explained that without the Internet, the Web couldn't exist. The Internet began as a US Defense Department research project in the 1970s and has grown into a global network-ofnetworks linking some

Printed photodetectors

International Nuclear Information System (INIS)

Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

2015-01-01

Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems. (paper)

Printed photodetectors

Science.gov (United States)

Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

2015-10-01

Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems.

3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution.

Science.gov (United States)

Guo, Ting; Holzberg, Timothy R; Lim, Casey G; Gao, Feng; Gargava, Ankit; Trachtenberg, Jordan E; Mikos, Antonios G; Fisher, John P

2017-04-12

In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development and computer-aided scaffold design, current quantitative analyses do not correlate material properties, printing parameters, and printing outcomes to a great extent. A model that correlates these properties has tremendous potential to standardize 3D printing for tissue engineering and biomaterial science. In this study, we printed poly(lactic-co-glycolic acid) (PLGA) utilizing a direct melt extrusion technique without additional ingredients. We investigated PLGA with various lactic acid:glycolic acid (LA:GA) molecular weight ratios and end caps to demonstrate the dependence of the extrusion process on the polymer composition. Micro-computed tomography was then used to evaluate printed scaffolds containing different LA:GA ratios, composed of different fiber patterns, and processed under different printing conditions. We built a statistical model to reveal the correlation and predominant factors that determine printing precision. Our model showed a strong linear relationship between the actual and predicted precision under different combinations of printing conditions and material compositions. This quantitative examination establishes a significant foreground to 3D print biomaterials following a systematic fabrication procedure. Additionally, our proposed statistical models can be applied to couple specific biomaterials and 3D printing applications for patient implants with particular requirements.

3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution

Science.gov (United States)

Guo, Ting; Holzberg, Timothy R; Lim, Casey G; Gao, Feng; Gargava, Ankit; Trachtenberg, Jordan E; Mikos, Antonios G; Fisher, John P

2018-01-01

In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development and computer-aided scaffold design, current quantitative analyses do not correlate material properties, printing parameters, and printing outcomes to a great extent. A model that correlates these properties has tremendous potential to standardize 3D printing for tissue engineering and biomaterial science. In this study, we printed poly(lactic-co-glycolic acid) (PLGA) utilizing a direct melt extrusion technique without additional ingredients. We investigated PLGA with various lactic acid: glycolic acid (LA:GA) molecular weight ratios and end caps to demonstrate the dependence of the extrusion process on the polymer composition. Micro-computed tomography was then used to evaluate printed scaffolds containing different LA:GA ratios, composed of different fiber patterns, and processed under different printing conditions. We built a statistical model to reveal the correlation and predominant factors that determine printing precision. Our model showed a strong linear relationship between the actual and predicted precision under different combinations of printing conditions and material compositions. This quantitative examination establishes a significant foreground to 3D print biomaterials following a systematic fabrication procedure. Additionally, our proposed statistical models can be applied to couple specific biomaterials and 3D printing applications for patient implants with particular requirements. PMID:28244880

The Development of Interactive World Wide Web Based Teaching Material in Forensic Science.

Science.gov (United States)

Daeid, Niamh Nic

2001-01-01

Describes the development of a Web-based tutorial in the forensic science teaching program at the University of Strathclyde (Scotland). Highlights include the theoretical basis for course development; objectives; Web site design; student feedback; and staff feedback. (LRW)

Storage Manager and File Transfer Web Services

International Nuclear Information System (INIS)

William A Watson III; Ying Chen; Jie Chen; Walt Akers

2002-01-01

Web services are emerging as an interesting mechanism for a wide range of grid services, particularly those focused upon information services and control. When coupled with efficient data transfer services, they provide a powerful mechanism for building a flexible, open, extensible data grid for science applications. In this paper we present our prototype work on a Java Storage Resource Manager (JSRM) web service and a Java Reliable File Transfer (JRFT) web service. A java client (Grid File Manager) on top of JSRM and is developed to demonstrate the capabilities of these web services. The purpose of this work is to show the extent to which SOAP based web services are an appropriate direction for building a grid-wide data management system, and eventually grid-based portals

Web cache location

Directory of Open Access Journals (Sweden)

Boffey Brian

2004-01-01

Full Text Available Stress placed on network infrastructure by the popularity of the World Wide Web may be partially relieved by keeping multiple copies of Web documents at geographically dispersed locations. In particular, use of proxy caches and replication provide a means of storing information 'nearer to end users'. This paper concentrates on the locational aspects of Web caching giving both an overview, from an operational research point of view, of existing research and putting forward avenues for possible further research. This area of research is in its infancy and the emphasis will be on themes and trends rather than on algorithm construction. Finally, Web caching problems are briefly related to referral systems more generally.

Moving toward a universally accessible web: Web accessibility and education.

Science.gov (United States)

Kurt, Serhat

2017-12-08

The World Wide Web is an extremely powerful source of information, inspiration, ideas, and opportunities. As such, it has become an integral part of daily life for a great majority of people. Yet, for a significant number of others, the internet offers only limited value due to the existence of barriers which make accessing the Web difficult, if not impossible. This article illustrates some of the reasons that achieving equality of access to the online world of education is so critical, explores the current status of Web accessibility, discusses evaluative tools and methods that can help identify accessibility issues in educational websites, and provides practical recommendations and guidelines for resolving some of the obstacles that currently hinder the achievability of the goal of universal Web access.

Clinical efficacy and effectiveness of 3D printing: a systematic review.

Science.gov (United States)

Diment, Laura E; Thompson, Mark S; Bergmann, Jeroen H M

2017-12-21

To evaluate the clinical efficacy and effectiveness of using 3D printing to develop medical devices across all medical fields. Systematic review compliant with Preferred Reporting Items for Systematic Reviews and Meta-Analyses. PubMed, Web of Science, OVID, IEEE Xplore and Google Scholar. A double-blinded review method was used to select all abstracts up to January 2017 that reported on clinical trials of a three-dimensional (3D)-printed medical device. The studies were ranked according to their level of evidence, divided into medical fields based on the International Classification of Diseases chapter divisions and categorised into whether they were used for preoperative planning, aiding surgery or therapy. The Downs and Black Quality Index critical appraisal tool was used to assess the quality of reporting, external validity, risk of bias, risk of confounding and power of each study. Of the 3084 abstracts screened, 350 studies met the inclusion criteria. Oral and maxillofacial surgery contained 58.3% of studies, and 23.7% covered the musculoskeletal system. Only 21 studies were randomised controlled trials (RCTs), and all fitted within these two fields. The majority of RCTs were 3D-printed anatomical models for preoperative planning and guides for aiding surgery. The main benefits of these devices were decreased surgical operation times and increased surgical accuracy. All medical fields that assessed 3D-printed devices concluded that they were clinically effective. The fields that most rigorously assessed 3D-printed devices were oral and maxillofacial surgery and the musculoskeletal system, both of which concluded that the 3D-printed devices outperformed their conventional comparators. However, the efficacy and effectiveness of 3D-printed devices remain undetermined for the majority of medical fields. 3D-printed devices can play an important role in healthcare, but more rigorous and long-term assessments are needed to determine if 3D-printed devices are

A Low-Power Integrated Humidity CMOS Sensor by Printing-on-Chip Technology

Directory of Open Access Journals (Sweden)

Chang-Hung Lee

2014-05-01

Full Text Available A low-power, wide-dynamic-range integrated humidity sensing chip is implemented using a printable polymer sensing material with an on-chip pulse-width-modulation interface circuit. By using the inkjet printing technique, poly(3,4-ethylene-dioxythiophene/polystyrene sulfonate that has humidity sensing features can be printed onto the top metal layer of a 0.35 μm CMOS IC. The developed printing-on-chip humidity sensor achieves a heterogeneous three dimensional sensor system-on-chip architecture. The humidity sensing of the implemented printing-on-chip sensor system is experimentally tested. The sensor shows a sensitivity of 0.98% to humidity in the atmosphere. The maximum dynamic range of the readout circuit is 9.8 MΩ, which can be further tuned by the frequency of input signal to fit the requirement of the resistance of printed sensor. The power consumption keeps only 154 μW. This printing-on-chip sensor provides a practical solution to fulfill an ultra-small integrated sensor for the applications in miniaturized sensing systems.

A low-power integrated humidity CMOS sensor by printing-on-chip technology.

Science.gov (United States)

Lee, Chang-Hung; Chuang, Wen-Yu; Cowan, Melissa A; Wu, Wen-Jung; Lin, Chih-Ting

2014-05-23

A low-power, wide-dynamic-range integrated humidity sensing chip is implemented using a printable polymer sensing material with an on-chip pulse-width-modulation interface circuit. By using the inkjet printing technique, poly(3,4-ethylene-dioxythiophene)/polystyrene sulfonate that has humidity sensing features can be printed onto the top metal layer of a 0.35 μm CMOS IC. The developed printing-on-chip humidity sensor achieves a heterogeneous three dimensional sensor system-on-chip architecture. The humidity sensing of the implemented printing-on-chip sensor system is experimentally tested. The sensor shows a sensitivity of 0.98% to humidity in the atmosphere. The maximum dynamic range of the readout circuit is 9.8 MΩ, which can be further tuned by the frequency of input signal to fit the requirement of the resistance of printed sensor. The power consumption keeps only 154 μW. This printing-on-chip sensor provides a practical solution to fulfill an ultra-small integrated sensor for the applications in miniaturized sensing systems.

Additive Manufacturing of Syntactic Foams: Part 2: Specimen Printing and Mechanical Property Characterization

Science.gov (United States)

Singh, Ashish Kumar; Saltonstall, Brooks; Patil, Balu; Hoffmann, Niklas; Doddamani, Mrityunjay; Gupta, Nikhil

2018-03-01

High-density polyethylene (HDPE) and its fly ash cenosphere-filled syntactic foam filaments have been recently developed. These filaments are used for three-dimensional (3D) printing using a commercial printer. The developed syntactic foam filament (HDPE40) contains 40 wt.% cenospheres in the HDPE matrix. Printing parameters for HDPE and HDPE40 were optimized for use in widely available commercial printers, and specimens were three-dimensionally (3D) printed for tensile testing at strain rate of 10-3 s-1. Process optimization resulted in smooth operation of the 3D printer without nozzle clogging or cenosphere fracture during the printing process. Characterization results revealed that the tensile modulus values of 3D-printed HDPE and HDPE40 specimens were higher than those of injection-molded specimens, while the tensile strength was comparable, but the fracture strain and density were lower.

Happy birthday WWW: the web is now old enough to drive

CERN Document Server

Gilbertson, Scott

2007-01-01

"The World Wide Web can now drive. Sixteen years ago yeterday, in a short post to the alt.hypertext newsgroup, tim Berners-Lee revealed the first public web pages summarizing his World Wide Web project." (1/4 page)

A design method for an intuitive web site

Energy Technology Data Exchange (ETDEWEB)

Quinniey, M.L.; Diegert, K.V.; Baca, B.G.; Forsythe, J.C.; Grose, E.

1999-11-03

The paper describes a methodology for designing a web site for human factor engineers that is applicable for designing a web site for a group of people. Many web pages on the World Wide Web are not organized in a format that allows a user to efficiently find information. Often the information and hypertext links on web pages are not organized into intuitive groups. Intuition implies that a person is able to use their knowledge of a paradigm to solve a problem. Intuitive groups are categories that allow web page users to find information by using their intuition or mental models of categories. In order to improve the human factors engineers efficiency for finding information on the World Wide Web, research was performed to develop a web site that serves as a tool for finding information effectively. The paper describes a methodology for designing a web site for a group of people who perform similar task in an organization.

Bioprocess-Engineering Education with Web Technology

NARCIS (Netherlands)

Sessink, O.

2006-01-01

Development of learning material that is distributed through and accessible via the World Wide Web. Various options from web technology are exploited to improve the quality and efficiency of learning material.

Progress in 3D Printing of Carbon Materials for Energy-Related Applications.

Science.gov (United States)

Fu, Kun; Yao, Yonggang; Dai, Jiaqi; Hu, Liangbing

2017-03-01

The additive-manufacturing (AM) technique, known as three-dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D-printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO-based materials, have been extensively reported for energy-related applications. In these circumstances, understanding the very recent developments of 3D-printed carbon materials and their extended applications to address energy-related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy-related applications are reviewed, including energy-storage applications, electronic circuits, and thermal-energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D-printing technology based on carbon materials for energy-related applications and beyond. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Applications of Open Source GMAW-Based Metal 3-D Printing

Directory of Open Access Journals (Sweden)

Yuenyong Nilsiam

2018-03-01

Full Text Available The metal 3-D printing market is currently dominated by high-end applications, which make it inaccessible for small and medium enterprises, fab labs, and individual makers who are interested in the ability to prototype and additively manufacture final products in metal. Recent progress led to low-cost open-source metal 3-D printers using a gas metal arc welding (GMAW-based print head. This reduced the cost of metal 3-D printers into the range of desktop prosumer polymer 3-D printers. Consequent research established good material properties of metal 3-D printed parts with readily-available weld filler wire, reusable substrates, thermal and stress properties, toolpath planning, bead-width control, mechanical properties, and support for overhangs. These previous works showed that GMAW-based metal 3-D printing has a good adhesion between layers and is not porous inside the printed parts, but they did not proceed far enough to demonstrate applications. In this study, the utility of the GMAW approach to 3-D printing is investigated using a low-cost open-source metal 3-D printer and a converted Computer Numerical Control router machine to make useful parts over a range of applications including: fixing an existing part by adding a 3-D metal feature, creating a product using the substrate as part of the component, 3-D printing in high resolution of useful objects, near net objects, and making an integrated product using a combination of steel and polymer 3-D printing. The results show that GMAW-based 3-D printing is capable of distributed manufacturing of useful products for a wide variety of applications for sustainable development.

Bringing 3D Printing to Geophysical Science Education

Science.gov (United States)

Boghosian, A.; Turrin, M.; Porter, D. F.

2014-12-01

3D printing technology has been embraced by many technical fields, and is rapidly making its way into peoples' homes and schools. While there is a growing educational and hobbyist community engaged in the STEM focused technical and intellectual challenges associated with 3D printing, there is unrealized potential for the earth science community to use 3D printing to communicate scientific research to the public. Moreover, 3D printing offers scientists the opportunity to connect students and the public with novel visualizations of real data. As opposed to introducing terrestrial measurements through the use of colormaps and gradients, scientists can represent 3D concepts with 3D models, offering a more intuitive education tool. Furthermore, the tactile aspect of models make geophysical concepts accessible to a wide range of learning styles like kinesthetic or tactile, and learners including both visually impaired and color-blind students.We present a workflow whereby scientists, students, and the general public will be able to 3D print their own versions of geophysical datasets, even adding time through layering to include a 4th dimension, for a "4D" print. This will enable scientists with unique and expert insights into the data to easily create the tools they need to communicate their research. It will allow educators to quickly produce teaching aids for their students. Most importantly, it will enable the students themselves to translate the 2D representation of geophysical data into a 3D representation of that same data, reinforcing spatial reasoning.

Expanding Geometry Understanding with 3D Printing