WorldWideScience

Sample records for wedge supported oblique

  1. The criterion of the existence or inexistence of transverse shock wave at wedge supported oblique detonation wave

    Institute of Scientific and Technical Information of China (English)

    Ai-Feng Wang; Wei Zhao; Zong-Lin Jiang

    2011-01-01

    A simplified theoretic method and numerical simulations were carried out to investigate the characterization of propagation of transverse shock wave at wedge supported oblique detonation wave.After solution validation,a criterlon which is associated with the ratio φ (u2/ucJ) of existence or inexistence of the transverse shock wave at the region of the primary triple was deduced systematically by 38 cases.It is observed that for abrupt oblique shock wave (OSW)/oblique detonation wave (ODW) transition,a transverse shock wave is generated at the region of the primary triple when φ < 1,however,such a transverse shock wave does not take place for the smooth OSW/ODW transition when φ > 1.The parameter φ can be expressed as the Mach number behind the ODW front for stable CJ detonation.When 0.9 < φ < 1.0,the reflected shock wave can pass across the contact discontinuity and interact with transverse waves which are originating from the ODW front.When 0.8 < φ < 0.9,the reflected shock wave can not pass across the contact discontinuity and only reflects at the contact discontinuity.The condition (0.8 < φ < 0.9) agrees well with the ratio (Dave/DcJ) in the critical detonation.

  2. First metatarsal proximal opening wedge osteotomy for correction of hallux valgus deformity: comparison of straight versus oblique osteotomy.

    Science.gov (United States)

    Han, Seung Hwan; Park, Eui Hyun; Jo, Joon; Koh, Yong Gon; Lee, Jin Woo; Choi, Woo Jin; Kim, Yong Sang

    2015-05-01

    The aim of this study was to compare clinical and radiographic outcomes of proximal opening wedge osteotomy using a straight versus oblique osteotomy. We retrospectively reviewed 104 consecutive first metatarsal proximal opening wedge osteotomies performed in 95 patients with hallux valgus deformity. Twenty-six feet were treated using straight metatarsal osteotomy (group A), whereas 78 feet were treated using oblique metatarsal osteotomy (group B). The hallux valgus angle (HVA), intermetatarsal angle (IMA), distal metatarsal articular angle, and distance from the first to the second metatarsal (distance) were measured for radiographic evaluation, whereas the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was used for clinical evaluation. Significant corrections in the HVA, IMA, and distance from the first to the second metatarsal were obtained in both groups at the last follow-up (posteotomy, an oblique first metatarsal osteotomy yielded better clinical and radiological outcomes.

  3. Oblique Photogrammetry Supporting 3d Urban Reconstruction of Complex Scenarios

    Science.gov (United States)

    Toschi, I.; Ramos, M. M.; Nocerino, E.; Menna, F.; Remondino, F.; Moe, K.; Poli, D.; Legat, K.; Fassi, F.

    2017-05-01

    Accurate 3D city models represent an important source of geospatial information to support various "smart city" applications, such as space management, energy assessment, 3D cartography, noise and pollution mapping as well as disaster management. Even though remarkable progress has been made in recent years, there are still many open issues, especially when it comes to the 3D modelling of complex urban scenarios like historical and densely-built city centres featuring narrow streets and non-conventional building shapes. Most approaches introduce strong building priors/constraints on symmetry and roof typology that penalize urban environments having high variations of roof shapes. Furthermore, although oblique photogrammetry is rapidly maturing, the use of slanted views for façade reconstruction is not completely included in the reconstruction pipeline of state-of-the-art software. This paper aims to investigate state-of-the-art methods for 3D building modelling in complex urban scenarios with the support of oblique airborne images. A reconstruction approach based on roof primitives fitting is tested. Oblique imagery is then exploited to support the manual editing of the generated building models. At the same time, mobile mapping data are collected at cm resolution and then integrated with the aerial ones. All approaches are tested on the historical city centre of Bergamo (Italy).

  4. 覆砂铁型铸造工艺生产ADI摩擦斜楔%ADI Oblique Wedge Produced with Resin Sand Coated-Iron Mold Casting Process

    Institute of Scientific and Technical Information of China (English)

    王彬; 鲍玉龙; 王德军

    2013-01-01

    The casting method and heat treatment process adopted for using resin sand coated-iron mold to produce ADI oblique wedge of railway vehicles was introduced. By adopting semi -pressurized gating system and filter to skim slag, choosing rational melting charge mixture ratio and the cored-wire injection nodularizing process, using salt bath isothermal quenching process, the hi-strength , hi-hardness and hi-toughness ADI castings with bainite + residual austenite as matrix were finally obtained.%介绍了采用覆砂铁型铸造生产火车用摩擦斜楔ADI铸件的铸造工艺和热处理工艺.通过采用半封闭式浇注系统和过滤网挡渣;选用合理的炉料配比及喂丝球化处理工艺;采用盐浴等温淬火工艺,最终获得以贝氏体+残余奥氏体为基体的高强度、高硬度及高韧性的ADI铸件.

  5. Research data supporting "InGaAs spin light emitting diodes measured in the Faraday and oblique Hanle geometries"

    OpenAIRE

    Mansell, R; Laloë, J-B.; Holmes, S. N.; Petrou, A.; Farrer, I.; Jones, G. A. C.; Ritchie, D A; Barnes, C. H. W.

    2016-01-01

    Supporting data for 'InGaAs spin light emitting diodes measured in the Faraday and oblique Hanle geometries' published as JPhysD 49 165103 (2016). Contains underlying data for figures 1 and 3. This research data supports “InGaAs spin light emitting diodes measured in the Faraday and oblique Hanle geometries” which has been published in “Journal of Physics D: Applied Physics”. This work was supported by the EPSRC [grant number EPSRC DTA award].

  6. Rethinking wedges

    Science.gov (United States)

    Davis, Steven J.; Cao, Long; Caldeira, Ken; Hoffert, Martin I.

    2013-03-01

    emissions, (2) stopping growth of emissions, and (3) reducing emissions. Although they noted that stabilizing the climate would require emissions to 'eventually drop to zero', Pacala and Socolow nonetheless defined 'solv[ing] the carbon and climate problem over the next half-century' as merely stopping the growth of emissions (phases 1 and 2). Further reductions (phase 3), they said, could wait 50 years if the level of emissions were held constant in the meantime. But growth of emissions has not stopped (phase 2) or even slowed (phase 1), it has accelerated [17, 18]. In 2010, annual CO2 emissions crested 9 GtC. At this level, holding emissions constant for 50 years (phase 2) is unlikely to be sufficient to avoid the benchmark targets of 500 ppm or 2 °C. To support this assertion, we performed ensemble simulations using the UK Met Office coupled climate/carbon cycle model, HadCM3L (see supplementary material available at stacks.iop.org/ERL/8/011001/mmedia), to project changes in atmospheric CO2 and global mean temperature in response to emissions scenarios in which seven wedges (W7) and nine wedges (W9) were immediately subtracted from the A2 marker scenario of the Intergovernmental Panel on Climate Change (IPCC)'s Special Report on Emissions Scenarios (SRES) [19] beginning in 2010 (figure 1). In the first half of this century, the A2 scenario is near the center of the plume of variation of the SRES emissions scenarios [20]. Indeed, actual annual emissions have exceeded A2 projections for more than a decade [21, 22]. During this period, strong growth of global emissions has been driven by the rapid, carbon-intensive growth of emerging economies [23, 24], which has continued despite the global financial crisis of 2008-9 [18]. For these reasons we believe that, among the SRES scenarios, A2 represents a reasonable 'business-as-usual' scenario. However, if emissions were to suddenly decline and follow a lower emissions business-as-usual trajectory such as B2, fewer wedges

  7. Mathematical support for automated geometry analysis of lathe machining of oblique peakless round–nose tools

    Science.gov (United States)

    Filippov, A. V.; Tarasov, S. Yu; Podgornyh, O. A.; Shamarin, N. N.; Filippova, E. O.

    2017-01-01

    Automatization of engineering processes requires developing relevant mathematical support and a computer software. Analysis of metal cutting kinematics and tool geometry is a necessary key task at the preproduction stage. This paper is focused on developing a procedure for determining the geometry of oblique peakless round-nose tool lathe machining with the use of vector/matrix transformations. Such an approach allows integration into modern mathematical software packages in distinction to the traditional analytic description. Such an advantage is very promising for developing automated control of the preproduction process. A kinematic criterion for the applicable tool geometry has been developed from the results of this study. The effect of tool blade inclination and curvature on the geometry-dependent process parameters was evaluated.

  8. Shock detachment from curved wedges

    Science.gov (United States)

    Mölder, S.

    2017-03-01

    Curved shock theory is used to show that the flow behind attached shocks on doubly curved wedges can have either positive or negative post-shock pressure gradients depending on the freestream Mach number, the wedge angle and the two wedge curvatures. Given enough wedge length, the flow near the leading edge can choke to force the shock to detach from the wedge. This local choking can preempt both the maximum deflection and the sonic criteria for shock detachment. Analytical predictions for detachment by local choking are supported by CFD results.

  9. Shock detachment from curved wedges

    Science.gov (United States)

    Mölder, S.

    2017-09-01

    Curved shock theory is used to show that the flow behind attached shocks on doubly curved wedges can have either positive or negative post-shock pressure gradients depending on the freestream Mach number, the wedge angle and the two wedge curvatures. Given enough wedge length, the flow near the leading edge can choke to force the shock to detach from the wedge. This local choking can preempt both the maximum deflection and the sonic criteria for shock detachment. Analytical predictions for detachment by local choking are supported by CFD results.

  10. Bow and Oblique Shock Formation in Soap Film

    Science.gov (United States)

    Kim, Ildoo; Mandre, Shreyas; Sane, Aakash

    2015-11-01

    In recent years, soap films have been exploited primarily to approximate two-dimensional flows while their three-dimensional character is relatively unattended. An example of the three-dimensional character of the flow in a soap film is the observed Marangoni shock wave when the flow speed exceeds the wave speed. In this study, we investigated the formation of bow and oblique shocks in soap films generated by wedges with different deflection angles. When the wedge deflection angle is small and the film flows fast, oblique shocks are observed. When the oblique shock cannot exists, bow shock is formed upstream the wedge. We characterized the oblique shock angle as a function of the wedge deflection angle and the flow speed, and we also present the criteria for transition between bow and oblique Marangoni shocks in soap films.

  11. Radial wedge flange clamp

    Science.gov (United States)

    Smith, Karl H.

    2002-01-01

    A radial wedge flange clamp comprising a pair of flanges each comprising a plurality of peripheral flat wedge facets having flat wedge surfaces and opposed and mating flat surfaces attached to or otherwise engaged with two elements to be joined and including a series of generally U-shaped wedge clamps each having flat wedge interior surfaces and engaging one pair of said peripheral flat wedge facets. Each of said generally U-shaped wedge clamps has in its opposing extremities apertures for the tangential insertion of bolts to apply uniform radial force to said wedge clamps when assembled about said wedge segments.

  12. Clinical effects of lateral wedge arch support insoles in knee osteoarthritis: A prospective double-blind randomized study.

    Science.gov (United States)

    Hsieh, Ru-Lan; Lee, Wen-Chung

    2016-07-01

    We compared the short-term efficacy of rigid versus soft lateral wedge arch support (LWAS) insoles for patients with knee osteoarthritis (OA), as assessed using the International Classification of Functioning, Disability and Health (ICF) system, through a prospective, double-blind, randomized controlled trial.Participants who fulfilled the combined radiographic and clinical criteria for knee OA, as defined by the American College of Rheumatology, were randomly prescribed 1 pair of rigid or soft LWAS insoles. Body functions and structures were evaluated according to Kellgren-Lawrence scores, the Foot Posture Index, Hospital Anxiety and Depression Scale scores, the pain-pressure threshold, postural stability, dynamic balance, and fall risk; activities and participation were assessed according to 10-m fast speed walking, stair climbing and chair rising times, and Chronic Pain Grade questionnaire responses; and knee OA-related health status was evaluated using the Knee Injury and Osteoarthritis Outcome Score (KOOS). Hospital Anxiety and Depression Scale scores, the pain-pressure threshold, physical activity, balance, Chronic Pain Grade questionnaire responses, and the KOOS were recorded before treatment and at 1-, 2-, and 3-month follow-ups.We enrolled 90 participants, 70 women and 20 men, with mean ages of 60.6 ± 10.8 and 63.1 ± 10.8 years in the rigid and soft LWAS insole groups, respectively. Repeated-measures analysis of covariance revealed significant time × group effect improvements in pain (P = 0.008 for the KOOS), stair ascent time (P = 0.003), daily living function (P = 0.003 for the KOOS), sports and recreation function (P = 0.012 for the KOOS), and quality of life (P = 0.021 for the KOOS) in the soft LWAS insole group.Patients with knee OA who used soft LWAS insoles for a short term showed more significant improvement than did those who used rigid LWAS insoles in pain, physical activity, daily living function, sports and recreation function

  13. A Novel Oblique Detonation Structure and Its Stability

    Institute of Scientific and Technical Information of China (English)

    TENG Hong-Hui; ZHAO Wei; JIANG Zong-Lin

    2007-01-01

    Oblique detonation structures induced by the wedge in the supersonic combustible gas mixtures are simulated numerically. The results show that the stationary oblique detonation structures are influenced by the gas flow Mach number, and a novel critical oblique detonation structure, which is characterized by a more complicated wave system, appears in the low Mach number cases. By introducing the inflow disturbance, its nonstationary evolution process is illustrated and its stability is verified.

  14. Formation of transverse waves in oblique detonations

    NARCIS (Netherlands)

    Verreault, J.; Higgins, A.J.; Stowe, R.A.

    2013-01-01

    The structure of oblique detonation waves stabilized on a hypersonic wedge in mixtures characterized by a large activation energy is investigated via steady method of characteristics (MoC) calculations and unsteady computational flowfield simulations. The steady MoC solutions show that, after the tr

  15. Formation of transverse waves in oblique detonations

    NARCIS (Netherlands)

    Verreault, J.; Higgins, A.J.; Stowe, R.A.

    2013-01-01

    The structure of oblique detonation waves stabilized on a hypersonic wedge in mixtures characterized by a large activation energy is investigated via steady method of characteristics (MoC) calculations and unsteady computational flowfield simulations. The steady MoC solutions show that, after the tr

  16. Indentation tectonics in the accretionary wedge of middle Manila Trench

    Institute of Scientific and Technical Information of China (English)

    LI Jiabiao; JIN Xianglong; RUAN Aiguo; WU Shimin; WU Ziyin; LIU Jianhua

    2004-01-01

    Based on the multibeam morpho-tectonic analysis of the Manila Trench accretionary wedge and its indentation tectonics and the contrasting researches with other geological and geophysical data, three tectonic zones of the wedge are established, faulting features, tectonic distribution and stress mechanism for the indentation tectonicsareanalyzed,oblique subduction along Manila Trench with convergent stress of NW55. Is presented, and the relationship of the ceasing of Eastern Subbasin spreading of South China Sea Basin to the formation of subduction zone of Manila Trench is discussed. By the model analysis and regional research, it is found that the seamount subduction along Manila Trenchoes not lead to the erosion of the accretionary wedge and the oblique subduction actually is a NWWtrending obducfion of Luzon micro-plate that results from the NWW-trending displacement of the Philippine Sea plate.

  17. Hydrodynamics of slip wedge and optimization of surface slip property

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The hydrodynamic load support generated by a slip wedge of a slider bearing was studied. The surface slip property was optimized so that a maximum hydrodynamic load support could be obtained. A multi-linearity method was given for the slip control equation of two-dimensional (2-D) wall slip. We investigated 2-D wall slip and the hydrodynamics of a finite length bearing with any values of the surface limiting shear stress. It was found that the hydrodynamic effect of the slip wedge is greater than the traditional geometrical convergent-wedge. Even though the geo- metrical gap is a parallel or divergent sliding gap, the slip wedge still gives rise to a very big hydrodynamic pressure. The optimized slip wedge can give rise to a hy- drodynamic load support as high as 2.5 times of what the geometrical conver- gent-wedge can produce. Wall slip usually gives a small surface friction.

  18. Hydrodynamics of slip wedge and optimization of surface slip property

    Institute of Scientific and Technical Information of China (English)

    MA GuoJun; WU ChengWei; ZHOU Ping

    2007-01-01

    The hydrodynamic load support generated by a slip wedge of a slider bearing was studied. The surface slip property was optimized so that a maximum hydrodynamic load support could be obtained. A multi-linearity method was given for the slip control equation of two-dimensional (2-D) wall slip. We investigated 2-D wall slip and the hydrodynamics of a finite length bearing with any values of the surface limiting shear stress. It was found that the hydrodynamic effect of the slip wedge is greater than the traditional geometrical convergent-wedge. Even though the geometrical gap is a parallel or divergent sliding gap, the slip wedge still gives rise to a very big hydrodynamic pressure. The optimized slip wedge can give rise to a hydrodynamic load support as high as 2.5 times of what the geometrical convergent-wedge can produce. Wall slip usually gives a small surface friction.

  19. Structure and Kinematics of the Indo-Burmese Wedge

    Science.gov (United States)

    Maurin, T.; Rangin, C.

    2007-12-01

    The Burma subduction trench and the associated Indo Burmese wedge mark the present eastern boundary of the Indian plate in the northern Bengal area. The initiation, duration and history of the Bengal crust subduction beneath Burma is still debated. The aim of this paper is to provide a structural and kinematic analysis of the Indo- Burmese wedge in order to better constraints the Bengal crust subduction history beneath Burma. On the basis of field observations, seismic reflection data interpretation and well logs data we present a structural analysis of the Outer Indo-Burmese Wedge. We also constrain the onset of this Outer Wedge to be younger than 2Ma, implying a recent and fast westward growth (~10cm/yr) since Late Pliocene in close relationship with the onset of the Shillong plateau. Restoration process of a synthetic cross section through the Outer Wedge allowed us to estimate the amount of EW shortening accommodated in the Outer Wedge to be 5.1mm/yr since 2Ma. These results combined with previous available GPS data from central Myanmar suggest strain partitioning at wedge scale. The core of the wedge is affected by shear deformation and acts as a buttress for a frontal wedge that accommodates a more compressive strain component. Finally we propose that the main characteristic of the Indo-Burmese wedge growth mechanism is the progressive incorporation of the most internal part of the wedge, formerly affected by transpressive thin-skinned tectonics, to the buttress where they are subsequently affected by shear deformation. The crustal structure boarding the newly formed buttress seems to be guided by the subducting crust fabrics. We are in favour of a very recent (Late Miocene) onset of the present Indian crust subduction beneath Burma coeval with the global plate kinematics reorganisation related to the Indian/Australian plate spliting. This subduction postdates the Indo Burmese range onset that must have started in early Miocene. This range first began to

  20. Wedges of Anxiety

    DEFF Research Database (Denmark)

    Hellström, Maria; Brandt, Eva

    2005-01-01

    The Heraclitian notion of a reality in constant flux seems to have settled even in the public consciousness. We are, to an ever-increasing extent, on the move; in motion between different places of abode, between domiciles and places of residence, between temporary addresses and provisory settlem...... cones of light, as the cut their way into the unknown, like wedges of anxiety...

  1. Obliquity along plate boundaries

    Science.gov (United States)

    Philippon, Mélody; Corti, Giacomo

    2016-12-01

    Most of the plate boundaries are activated obliquely with respect to the direction of far field stresses, as roughly only 8% of the plate boundaries total length shows a very low obliquity (ranging from 0 to 10°, sub-orthogonal to the plate displacement). The obliquity along plate boundaries is controlled by (i) lateral rheological variations within the lithosphere and (ii) consistency with the global plate circuit. Indeed, plate tectonics and magmatism drive rheological changes within the lithosphere and consequently influence strain localization. Geodynamical evolution controls large-scale mantle convection and plate formation, consumption, and re-organization, thus triggering plate kinematics variations, and the adjustment and re-orientation of far field stresses. These geological processes may thus result in plate boundaries that are not perpendicular but oblique to the direction of far field stresses. This paper reviews the global patterns of obliquity along plate boundaries. Using GPlate, we provide a statistical analysis of present-day obliquity along plate boundaries. Within this framework, by comparing natural examples and geological models, we discuss deformation patterns and kinematics recorded along oblique plate boundaries.

  2. Life at the wedge: the activity and diversity of arctic ice wedge microbial communities.

    Science.gov (United States)

    Wilhelm, Roland C; Radtke, Kristin J; Mykytczuk, Nadia C S; Greer, Charles W; Whyte, Lyle G

    2012-04-01

    The discovery of polygonal terrain on Mars underlain by ice heightens interest in the possibility that this water-bearing habitat may be, or may have been, a suitable habitat for extant life. The possibility is supported by the recurring detection of terrestrial microorganisms in subsurface ice environments, such as ice wedges found beneath tundra polygon features. A characterization of the microbial community of ice wedges from the high Arctic was performed to determine whether this ice environment can sustain actively respiring microorganisms and to assess the ecology of this extreme niche. We found that ice wedge samples contained a relatively abundant number of culturable cells compared to other ice habitats (∼10(5) CFU·mL(-1)). Respiration assays in which radio-labeled acetate and in situ measurement of CO(2) flux were used suggested low levels of microbial activity, though more sensitive techniques are required to confirm these findings. Based on 16S rRNA gene pyrosequencing, bacterial and archaeal ice wedge communities appeared to reflect surrounding soil communities. Two Pseudomonas sp. were the most abundant taxa in the ice wedge bacterial library (∼50%), while taxa related to ammonia-oxidizing Thaumarchaeota occupied 90% of the archaeal library. The tolerance of a variety of isolates to salinity and temperature revealed characteristics of a psychrotolerant, halotolerant community. Our findings support the hypothesis that ice wedges are capable of sustaining a diverse, plausibly active microbial community. As such, ice wedges, compared to other forms of less habitable ground ice, could serve as a reservoir for life on permanently cold, water-scarce, ice-rich extraterrestrial bodies and are therefore of interest to astrobiologists and ecologists alike. .

  3. Comparison of dosimetric characteristics of Siemens virtual and physical wedges for ONCOR linear accelerator

    Directory of Open Access Journals (Sweden)

    Attalla Ehab

    2010-01-01

    Full Text Available Dosimetric properties of virtual wedge (VW and physical wedge (PW in 6- and 10-MV photon beams from a Siemens ONCOR linear accelerator, including wedge factors, depth doses, dose profiles, peripheral doses, are compared. While there is a great difference in absolute values of wedge factors, VW factors (VWFs and PW factors (PWFs have a similar trend as a function of field size. PWFs have stronger depth dependence than VWF due to beam hardening in PW fields. VW dose profiles in the wedge direction, in general, match very well with those of PW, except in the toe area of large wedge angles with large field sizes. Dose profiles in the nonwedge direction show a significant reduction in PW fields due to off-axis beam softening and oblique filtration. PW fields have significantly higher peripheral doses than open and VW fields. VW fields have similar surface doses as the open fields, while PW fields have lower surface doses. Surface doses for both VW and PW increase with field size and slightly with wedge angle. For VW fields with wedge angles 45° and less, the initial gap up to 3 cm is dosimetrically acceptable when compared to dose profiles of PW. VW fields in general use less monitor units than PW fields.

  4. Mars Obliquity Cycle Illustration

    Science.gov (United States)

    2008-01-01

    The tilt of Mars' spin axis (obliquity) varies cyclically over hundreds of thousands of years, and affects the sunlight falling on the poles. Because the landing site of NASA's Phoenix Mars Lander is so near the north pole, higher sun and warmer temperatures during high obliquity lead to warmer, more humid surface environments, and perhaps thicker, more liquid-like films of water in soil. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  5. The use of sternal wedge osteotomy in pectus surgery: when is it necessary?

    Science.gov (United States)

    Kara, Murat; Gundogdu, Ahmet Gokhan; Kadioglu, Salih Zeki; Cayirci, Ertug Can; Taskin, Necati

    2016-09-01

    The Ravitch procedure is a well-established surgical procedure for correction of chest wall deformities. Sternal wedge osteotomy is an important part of this procedure. We studied the incidence of wedge osteotomy with respect to the type of chest wall deformity in patients undergoing surgical correction with the use of a recently developed chest wall stabilization system. A total of 47 patients, 39 (83%) male and 8 (17%) female with a mean age of 14.9 ± 2.1 years, underwent the Ravitch procedure. Twenty-four (51.1%) had pectus carinatum, 19 (40.4%) had pectus excavatum, and 4 (8.5%) had pectus arcuatum. A conventional or oblique sternal wedge osteotomy was performed as indicated, followed by chest wall stabilization using the MedXpert system. Of the 47 patients, 27 (57.4%) had a sternal wedge osteotomy. All cases of pectus arcuatum and redo cases underwent sternal wedge osteotomy. Pectus excavatum cases tended to have a greater incidence of wedge osteotomy compared to pectus carinatum cases (68.4% vs. 41.7%, p = 0.052). Patients with more resected ribs had a greater rate of wedge osteotomy (63.4%) compared to those with fewer resected ribs (16.7%, p = 0.043). A sternal wedge osteotomy is more commonly performed in patients with pectus excavatum compared to those with pectus carinatum. All redo and pectus arcuatum cases need a wedge osteotomy for proper correction. Wedge osteotomy is very likely in more aggressive corrections with more rib resections. © The Author(s) 2016.

  6. Climates of Oblique Exoplanets

    Science.gov (United States)

    Dobrovolskis, A. R.

    2008-12-01

    A previous paper (Dobrovolskis 2007; Icarus 192, 1-23) showed that eccentricity can have profound effects on the climate, habitability, and detectability of extrasolar planets. This complementary study shows that obliquity can have comparable effects. The known exoplanets exhibit a wide range of orbital eccentricities, but those within several million km of their suns are generally in near-circular orbits. This fact is widely attributed to the dissipation of tides in the planets, which is particularly effective for solid/liquid bodies like "Super-Earths". Along with friction between a solid mantle and a liquid core, tides also are expected to despin a planet until it is captured in the synchronous resonance, so that its rotation period is identical to its orbital period. The canonical example of synchronous spin is the way that our Moon always keeps nearly the same hemisphere facing the Earth. Tides also tend to reduce the planet's obliquity (the angle between its spin and orbital angular velocities). However, orbit precession can cause the rotation to become locked in a "Cassini state", where it retains a nearly constant non-zero obliquity. For example, our Moon maintains an obliquity of about 6.7° with respect to its orbit about the Earth. For comparison, stable Cassini states can exist for practically any obliquity up to 180° for planets of binary stars, or in multi-planet systems with high mutual inclinations, such as are produced by scattering or by the Kozai mechanism. This work considers planets in synchronous rotation with circular orbits. For obliquities greater than 90°, the ground track of the sub-solar point wraps around all longitudes on the surface of such a planet. For smaller obliquities, the sub-solar track takes the figure-8 shape of an analemma. This can be visualized as the intersection of the planet's spherical surface with a right circular cylinder, parallel to the spin axis and tangent to the equator from the inside. The excursion of the

  7. Oblique Axis Body Fracture

    DEFF Research Database (Denmark)

    Takai, Hirokazu; Konstantinidis, Lukas; Schmal, Hagen

    2016-01-01

    Purpose. Anderson type III odontoid fractures have traditionally been considered stable and treated conservatively. However, unstable cases with unfavorable results following conservative treatment have been reported. Methods. We present the cases of two patients who sustained minimally displaced...... Anderson type III fractures with a characteristic fracture pattern that we refer to as "oblique type axis body fracture." Results. The female patients aged 90 and 72 years, respectively, were both diagnosed with minimally displaced Anderson type III fractures. Both fractures had a characteristic "oblique...... type" fracture pattern. The first patient was treated conservatively with cervical spine immobilization in a semirigid collar. However, gross displacement was noted at the 6-week follow-up visit. The second patient was therefore treated operatively by C1-C3/4 posterior fusion and the course...

  8. Oblique Axis Body Fracture

    DEFF Research Database (Denmark)

    Takai, Hirokazu; Konstantinidis, Lukas; Schmal, Hagen;

    2016-01-01

    was uneventful. Conclusions. Oblique type axis body fractures resemble a highly unstable subtype of Anderson type III fractures with the potential of severe secondary deformity following conservative treatment, irrespective of initial grade of displacement. The authors therefore warrant a high index of suspicion......Purpose. Anderson type III odontoid fractures have traditionally been considered stable and treated conservatively. However, unstable cases with unfavorable results following conservative treatment have been reported. Methods. We present the cases of two patients who sustained minimally displaced...

  9. The obliquity of Enceladus

    CERN Document Server

    Baland, Rose-Marie; Van Hoolst, Tim

    2015-01-01

    The extraordinary activity at Enceladus' warm south pole indicates the presence of an internal global or local reservoir of liquid water beneath the surface. While Tyler (2009, 2011) has suggested that the geological activity and the large heat flow of Enceladus could result from tidal heating triggered by a large obliquity of at least 0.05{\\deg}-0.1{\\deg}, theoretical models of the Cassini state predict the obliquity to be two to three orders of magnitude smaller for an entirely solid and rigid Enceladus. We investigate the influence of an internal subsurface ocean and of tidal deformations of the solid layers on the obliquity of Enceladus. Our Cassini state model takes into account the external torque exerted by Saturn on each layer of the satellite and the internal gravitational and pressure torques induced by the presence of the liquid layer. As a new feature, our model also includes additional torques that arise because of the periodic tides experienced by the satellite. We find that the upper limit for ...

  10. On the acoustic wedge design and simulation of anechoic chamber

    Science.gov (United States)

    Jiang, Changyong; Zhang, Shangyu; Huang, Lixi

    2016-10-01

    This study proposes an alternative to the classic wedge design for anechoic chambers, which is the uniform-then-gradient, flat-wall (UGFW) structure. The working mechanisms of the proposed structure and the traditional wedge are analyzed. It is found that their absorption patterns are different. The parameters of both structures are optimized for achieving minimum absorber depth, under the condition of absorbing 99% of normal incident sound energy. It is found that, the UGFW structure achieves a smaller total depth for the cut-off frequencies ranging from 100 Hz to 250 Hz. This paper also proposes a modification for the complex source image (CSI) model for the empirical simulation of anechoic chambers, originally proposed by Bonfiglio et al. [J. Acoust. Soc. Am. 134 (1), 285-291 (2013)]. The modified CSI model considers the non-locally reactive effect of absorbers at oblique incidence, and the improvement is verified by a full, finite-element simulation of a small chamber. With the modified CSI model, the performance of both decorations with the optimized parameters in a large chamber is simulated. The simulation results are analyzed and checked against the tolerance of 1.5 dB deviation from the inverse square law, stipulated in the ISO standard 3745(2003). In terms of the total decoration depth and anechoic chamber performance, the UGFW structure is better than the classic wedge design.

  11. Real-time detection of dielectric anisotropy or isotropy in unconventional oil-gas reservoir rocks supported by the oblique-incidence reflectivity difference technique

    Science.gov (United States)

    Zhan, Honglei; Wang, Jin; Zhao, Kun; Lű, Huibin; Jin, Kuijuan; He, Liping; Yang, Guozhen; Xiao, Lizhi

    2016-12-01

    Current geological extraction theory and techniques are very limited to adequately characterize the unconventional oil-gas reservoirs because of the considerable complexity of the geological structures. Optical measurement has the advantages of non-interference with the earth magnetic fields, and is often useful in detecting various physical properties. One key parameter that can be detected using optical methods is the dielectric permittivity, which reflects the mineral and organic properties. Here we reported an oblique-incidence reflectivity difference (OIRD) technique that is sensitive to the dielectric and surface properties and can be applied to characterization of reservoir rocks, such as shale and sandstone core samples extracted from subsurface. The layered distribution of the dielectric properties in shales and the uniform distribution in sandstones are clearly identified using the OIRD signals. In shales, the micro-cracks and particle orientation result in directional changes of the dielectric and surface properties, and thus, the isotropy and anisotropy of the rock can be characterized by OIRD. As the dielectric and surface properties are closely related to the hydrocarbon-bearing features in oil-gas reservoirs, we believe that the precise measurement carried with OIRD can help in improving the recovery efficiency in well-drilling process.

  12. Real-time detection of dielectric anisotropy or isotropy in unconventional oil-gas reservoir rocks supported by the oblique-incidence reflectivity difference technique

    Science.gov (United States)

    Zhan, Honglei; Wang, Jin; Zhao, Kun; Lű, Huibin; Jin, Kuijuan; He, Liping; Yang, Guozhen; Xiao, Lizhi

    2016-01-01

    Current geological extraction theory and techniques are very limited to adequately characterize the unconventional oil-gas reservoirs because of the considerable complexity of the geological structures. Optical measurement has the advantages of non-interference with the earth magnetic fields, and is often useful in detecting various physical properties. One key parameter that can be detected using optical methods is the dielectric permittivity, which reflects the mineral and organic properties. Here we reported an oblique-incidence reflectivity difference (OIRD) technique that is sensitive to the dielectric and surface properties and can be applied to characterization of reservoir rocks, such as shale and sandstone core samples extracted from subsurface. The layered distribution of the dielectric properties in shales and the uniform distribution in sandstones are clearly identified using the OIRD signals. In shales, the micro-cracks and particle orientation result in directional changes of the dielectric and surface properties, and thus, the isotropy and anisotropy of the rock can be characterized by OIRD. As the dielectric and surface properties are closely related to the hydrocarbon-bearing features in oil-gas reservoirs, we believe that the precise measurement carried with OIRD can help in improving the recovery efficiency in well-drilling process. PMID:27976746

  13. Portal dosimetry in wedged beams

    NARCIS (Netherlands)

    Spreeuw, H.; Rozendaal, R.; Camargo, P.; Mans, A.; Wendling, M.; Olaciregui-Ruiz, I.; Sonke, J.J.; Herk, M. van; Mijnheer, B.

    2015-01-01

    Portal dosimetry using electronic portal imaging devices (EPIDs) is often applied to verify high-energy photon beam treatments. Due to the change in photon energy spectrum, the resulting dose values are, however, not very accurate in the case of wedged beams if the pixel-to-dose conversion for the s

  14. Wedge wetting by electrolyte solutions

    Science.gov (United States)

    Mußotter, Maximilian; Bier, Markus

    2017-09-01

    The wetting of a charged wedgelike wall by an electrolyte solution is investigated by means of classical density functional theory. As in other studies on wedge wetting, this geometry is considered as the most simple deviation from a planar substrate, and it serves as a first step toward more complex confinements of fluids. By focusing on fluids containing ions and surface charges, features of real systems are covered that are not accessible within the vast majority of previous theoretical studies concentrating on simple fluids in contact with uncharged wedges. In particular, the filling transition of charged wedges is necessarily of first order, because wetting transitions of charged substrates are of first order and the barrier in the effective interface potential persists below the wetting transition of a planar wall; hence, critical filling transitions are not expected to occur for ionic systems. The dependence of the critical opening angle on the surface charge, as well as the dependence of the filling height, of the wedge adsorption, and of the line tension on the opening angle and on the surface charge are analyzed in detail.

  15. The Chicxulub Impact Crater and Oblique Impact

    Science.gov (United States)

    McDonald, M.; Gulick, S.; Melosh, H.; Christeson, G.

    2007-05-01

    Determining whether or not the Chicxulub impact was oblique (<45 degrees) will aid in our understanding of the environmental consequences 65 Ma. Planetary impact events, and impact simulations in the laboratory, show that oblique impacts have clear asymmetric ejecta distributions. However, the subsurface structures of the resultant craters are not well understood. In 2005, we acquired 1822 km of seismic reflection data onboard the R/V Maurice Ewing imaging the massive (200+ km) Chicxulub impact crater. The seismic profiles show that pre- crater stratigraphy outside the central basin of the Chicxulub impact crater is offset downward into the crater marking the post-impact slumping and formation of the terrace zone. The inward collapse of the Chicxulub terrace zone coincides with the outward collapse of the central uplift to form the peak ring. Chicxulub's peak ring is offset to the southeast, away from the deepest terrace zone mapped in the seismic data, suggesting that its peak ring was offset toward a more gradual wall of the transient cavity. Peak ring offsets, relative to crater center, of Venusian craters from radar images in the Magellan data set allow us to determine whether there are systematic variations in peak ring offset due to oblique impact. Ten pristine Venusian peak ring craters formed by oblique impact show that peak rings are offset both uprange and downrange, suggesting that peak ring position, and related subsurface asymmetries in the terrace zone, do not provide information about impact obliquity. This analysis supports the idea that Chicxulub's peak ring offset is a consequence of target properties and pre-impact structure and independent of impact trajectory.

  16. Deformation of an experimental drainage network in oblique collision

    Science.gov (United States)

    Guerit, L.; Dominguez, S.; Malavieille, J.; Castelltort, S.

    2016-12-01

    In oblique collision settings, parallel and perpendicular components of the relative plate motion can be partitioned into different structures of deformation and may be localized close to the plate boundary, or distributed on a wider region. In the Southern Alps of New Zealand, it has been proposed that one-third of the regional convergence is distributed in a broad area along the Southern Alps orogenic wedge. To better document and understand the regional dynamics of such systems, reliable markers of the horizontal tectonic motion over geological time scales are needed. River networks are able to record a large amount of distributed strain and they can thus be used to reconstruct the mode and rate of distribution away from major active structures. To explore the controls on river resilience to deformation, we develop an experimental model to investigate river pattern evolution over a doubly-vergent orogenic wedge growing in a context of oblique convergence. We use a rainfall system to activate erosion, sediment transport and river development on the model surface. At the end of the experiment, the drainage network is statistically rotated clockwise, confirming that rivers can record the distribution of motion along the wedge. Image analysis of channel time-space evolution shows how the fault-parallel and fault-perpendicular components of motion decrease toward the fault and impose rotation to the main trunk valleys. However, rivers do not record the whole imposed rotation rate, which suggest that the natural lateral channel dynamics can alter the capacity of rivers to act as passive markers of deformation.

  17. Proximal first metatarsal opening wedge osteotomy: geometric analysis on saw bone models.

    Science.gov (United States)

    Kugan, R; Currall, V A; Johal, P; Clark, C I C

    2015-03-01

    For hallux valgus correction, distal first metatarsal osteotomy is generally used for minor to moderate deformities, diaphyseal osteotomy for moderate deformities and basal osteotomy or arthrodesis for severe deformities. With the advent of locking plates, there has been renewed interest in opening wedge basal osteotomy. We undertook this study in order to understand the power and limitations of this osteotomy. Proximal opening wedge osteotomies were performed on saw bone models in four orientations, with three different wedge sizes: (1) perpendicular to the ground (PG); (2) perpendicular to the shaft (PS); (3) perpendicular to shaft with 30° declination (DEC); (4) 30° oblique (OB). Pre- and post-osteotomy measurements were made of axial and plantar translation and inter-metatarsal angle. Plantar translation and intermetatarsal angle correction increased with increasing wedge size. The DEC osteotomy produced the greatest increase in length of metatarsal shaft, while the PS osteotomy gave the least. The most plantar translation was achieved with the DEC osteotomy. Overall, the PS osteotomy gave the largest correction of the intermetatarsal angle. Although there are several published clinical case series of the proximal opening wedge osteotomy, this is the first study to fully evaluate its geometry. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Contact process in a wedge

    CERN Document Server

    Cox, J Theodore; Schinazi, Rinaldo B

    2009-01-01

    We prove that the supercritical one-dimensional contact process survives in certain wedge-like space-time regions, and that when it survives it couples with the unrestricted contact process started from its upper invariant measure. As an application we show that a type of weak coexistence is possible in the nearest-neighbor ``grass-bushes-trees'' successional model introduced in Durrett and Swindle (1991).

  19. Ice-Creams and Wedge Graphs

    CERN Document Server

    Ackerman, Eyal; Pinchasi, Rom

    2011-01-01

    We show that for every compact convex set $S$ in the plane and every $0 < \\alpha < \\pi$, there exist a point $O$ and two supporting lines to $S$ passing through $O$ and touching $S$ at two \\emph{single points} $X$ and $Y$, respectively, such that $|OX|=|OY|$ and the angle between the two lines has measure $\\alpha$. As a consequence, we provide a simplified proof to the following result by Carmi, Katz, Lotker, and Ros\\'en \\cite{CKLR10}. Given a set of $\\frac{\\pi}{3}$-directional antennas (that is, antennas each of which can communicate along a wedge of angle $\\frac{\\pi}{3}$), one can always assign a direction to each antenna such that the resulting communication graph is connected, where two antennas can communicate if and only if each lies in the wedge assigned to the other. In fact we obtain a much stronger and optimal result (see Theorem \\ref{theorem:main}) saying in particular that one can chose the directions of the antennas so that the communication graph has diameter $\\le 4$.

  20. Oblique dust density waves

    Science.gov (United States)

    Piel, Alexander; Arp, Oliver; Menzel, Kristoffer; Klindworth, Markus

    2007-11-01

    We report on experimental observations of dust density waves in a complex (dusty) plasma under microgravity. The plasma is produced in a radio-frequency parallel-plate discharge (argon, p=15Pa, U=65Vpp). Different sizes of dust particles were used (3.4 μm and 6.4μm diameter). The low-frequency (f 11Hz) dust density waves are naturally unstable modes, which are driven by the ion flow in the plasma. Surprisingly, the wave propagation direction is aligned with the ion flow direction in the bulk plasma but becomes oblique at the boundary of the dust cloud with an inclination of 60^o with respect to the plasma boundary. The experimental results are compared with a kinetic model in the electrostatic approximation [1] and a fluid model [2]. Moreover, the role of dust surface waves is discussed. [1] M. Rosenberg, J. Vac. Sci. Technol. A 14, 631 (1996) [2] A. Piel et al, Phys. Rev. Lett. 97, 205009 (2006)

  1. Large capacity oblique all-wing transport aircraft

    Science.gov (United States)

    Galloway, Thomas L.; Phillips, James A.; Kennelly, Robert A., Jr.; Waters, Mark H.

    1996-01-01

    Dr. R. T. Jones first developed the theory for oblique wing aircraft in 1952, and in subsequent years numerous analytical and experimental projects conducted at NASA Ames and elsewhere have established that the Jones' oblique wing theory is correct. Until the late 1980's all proposed oblique wing configurations were wing/body aircraft with the wing mounted on a pivot. With the emerging requirement for commercial transports with very large payloads, 450-800 passengers, Jones proposed a supersonic oblique flying wing in 1988. For such an aircraft all payload, fuel, and systems are carried within the wing, and the wing is designed with a variable sweep to maintain a fixed subsonic normal Mach number. Engines and vertical tails are mounted on pivots supported from the primary structure of the wing. The oblique flying wing transport has come to be known as the Oblique All-Wing (OAW) transport. This presentation gives the highlights of the OAW project that was to study the total concept of the OAW as a commercial transport.

  2. Pollical oblique ligament in humans and non-human primates.

    Science.gov (United States)

    Shrewsbury, Marvin

    2003-04-01

    A morphological study of the oblique ligament in the thumb is presented. The ligament was consistently described in human specimens and compared with dissections of non-human primates from different species. The oblique ligament was found in some, but not all, specimens in each of the following species examined: chimpanzee, orangutan, gibbon, anubis baboon, hamadryas baboon, squirrel monkey, lemur and marmoset. A revised identity of the oblique ligament is proposed as a reinforced distal border of a fibro-osseous annular pollical flexor sheath and whose function is not independent of the flexor sheath. The constant presence and tendinous trait of the pollical oblique ligament in humans, when compared with non-human primates, supports the notion that the oblique ligament strengthens the pollical flexor sheath in humans for restraint of the flexor pollicis longus tendon during forceful precision pinching. A derivation of the pollical oblique ligament is considered as representing a vestigial radial limb of a flexor pollicis superficialis tendon in the thumb.

  3. Effects of extreme obliquity variations on the habitability of exoplanets.

    Science.gov (United States)

    Armstrong, J C; Barnes, R; Domagal-Goldman, S; Breiner, J; Quinn, T R; Meadows, V S

    2014-04-01

    We explore the impact of obliquity variations on planetary habitability in hypothetical systems with high mutual inclination. We show that large-amplitude, high-frequency obliquity oscillations on Earth-like exoplanets can suppress the ice-albedo feedback, increasing the outer edge of the habitable zone. We restricted our exploration to hypothetical systems consisting of a solar-mass star, an Earth-mass planet at 1 AU, and 1 or 2 larger planets. We verified that these systems are stable for 10(8) years with N-body simulations and calculated the obliquity variations induced by the orbital evolution of the Earth-mass planet and a torque from the host star. We ran a simplified energy balance model on the terrestrial planet to assess surface temperature and ice coverage on the planet's surface, and we calculated differences in the outer edge of the habitable zone for planets with rapid obliquity variations. For each hypothetical system, we calculated the outer edge of habitability for two conditions: (1) the full evolution of the planetary spin and orbit and (2) the eccentricity and obliquity fixed at their average values. We recovered previous results that higher values of fixed obliquity and eccentricity expand the habitable zone, but we also found that obliquity oscillations further expand habitable orbits in all cases. Terrestrial planets near the outer edge of the habitable zone may be more likely to support life in systems that induce rapid obliquity oscillations as opposed to fixed-spin planets. Such planets may be the easiest to directly characterize with space-borne telescopes.

  4. Effects of Extreme Obliquity Variations on the Habitability of Exoplanets

    Science.gov (United States)

    Armstrong, J. C.; Barnes, R.; Domagal-Goldman, S.; Breiner, J.; Quinn, T. R.; Meadows, V. S.

    2014-01-01

    We explore the impact of obliquity variations on planetary habitability in hypothetical systems with high mutual inclination. We show that large-amplitude, high-frequency obliquity oscillations on Earth-like exoplanets can suppress the ice-albedo feedback, increasing the outer edge of the habitable zone. We restricted our exploration to hypothetical systems consisting of a solar-mass star, an Earth-mass planet at 1 AU, and 1 or 2 larger planets. We verified that these systems are stable for 108 years with N-body simulations and calculated the obliquity variations induced by the orbital evolution of the Earth-mass planet and a torque from the host star. We ran a simplified energy balance model on the terrestrial planet to assess surface temperature and ice coverage on the planet's surface, and we calculated differences in the outer edge of the habitable zone for planets with rapid obliquity variations. For each hypothetical system, we calculated the outer edge of habitability for two conditions: (1) the full evolution of the planetary spin and orbit and (2) the eccentricity and obliquity fixed at their average values. We recovered previous results that higher values of fixed obliquity and eccentricity expand the habitable zone, but we also found that obliquity oscillations further expand habitable orbits in all cases. Terrestrial planets near the outer edge of the habitable zone may be more likely to support life in systems that induce rapid obliquity oscillations as opposed to fixed-spin planets. Such planets may be the easiest to directly characterize with space-borne telescopes.

  5. Three-dimensional wedge filling in ordered and disordered systems

    Energy Technology Data Exchange (ETDEWEB)

    Greenall, M J [Department of Mathematics, Imperial College London, 180 Queen' s Gate, London SW7 2BZ (United Kingdom); Parry, A O [Department of Mathematics, Imperial College London, 180 Queen' s Gate, London SW7 2BZ (United Kingdom); Romero-Enrique, J M [Department of Mathematics, Imperial College London, 180 Queen' s Gate, London SW7 2BZ (United Kingdom)

    2004-04-21

    We investigate interfacial structural and fluctuation effects occurring at continuous filling transitions in 3D wedge geometries. We show that fluctuation-induced wedge covariance relations that have been reported recently for 2D filling and wetting have mean-field or classical analogues that apply to higher-dimensional systems. Classical wedge covariance emerges from analysis of filling in shallow wedges based on a simple interfacial Hamiltonian model and is supported by detailed numerical investigations of filling within a more microscopic Landau-like density functional theory. Evidence is presented that classical wedge covariance is also obeyed for filling in more acute wedges in the asymptotic critical regime. For sufficiently short-ranged forces mean-field predictions for the filling critical exponents and covariance are destroyed by pseudo-one-dimensional interfacial fluctuations. We argue that in this filling fluctuation regime the critical exponents describing the divergence of length scales are related to values of the interfacial wandering exponent {zeta}(d) defined for planar interfaces in (bulk) two-dimensional (d = 2) and three-dimensional (d = 3) systems. For the interfacial height l{sub w} {approx} {theta}-{alpha}){sup -{beta}}{sub w}, with {theta} the contact angle and {alpha} the wedge tilt angle, we find {beta}{sub w} = {zeta}(2)/2(1-{zeta}(3)). For pure systems (thermal disorder) we recover the known result {beta}{sub w} = 1/4 predicted by interfacial Hamiltonian studies whilst for random-bond disorder we predict the universal critical exponent {beta} {approx} even in the presence of dispersion forces. We revisit the transfer matrix theory of three-dimensional filling based on an effective interfacial Hamiltonian model and discuss the interplay between breather, tilt and torsional interfacial fluctuations. We show that the coupling of the modes allows the problem to be mapped onto a quantum mechanical problem as conjectured by previous authors

  6. Geometry and kinematics of extensional structural wedges

    Science.gov (United States)

    Gui, Baoling; He, Dengfa; Zhang, Yongsheng; Sun, Yanpeng; Huang, Jingyi; Zhang, Wenjun

    2017-03-01

    Structural wedges in the compressive environment have been recognized and studied in different locations. However, extension structural wedges are less well-understood. Based on the normal fault-bend folding theory and inclined shear model, this paper quantitatively analyses deformations related to extensional structural wedges and builds a series of geometric models for them. An extensional structural wedge is a fault-block held by two or more normal faults, the action of which would fold its overlying strata. Extensional structural wedges of different shapes will lead to different deformation results for the overlying strata, and this paper illustrates both the triangular and quadrangular wedges and their related deformations. This paper also discusses differences between the extensional structural wedges and the normal fault-bend-folding. By analysing two seismic sections from Langfang-Gu'an Sag, East China, this paper provides two natural examples of the triangular and quadrangular extensional structural wedges, where the models can reasonably explain the overlying distinct highs and lows without obvious faults. The establishment of a geometric model of extensional structural wedges can provide reference and theoretical bases for future quantitative analysis of deformations in the extensional environment.

  7. Secular obliquity variations for Ceres

    Science.gov (United States)

    Bills, Bruce; Scott, Bryan R.; Nimmo, Francis

    2016-10-01

    We have constructed secular variation models for the orbit and spin poles of the asteroid (1) Ceres, and used them to examine how the obliquity, or angular separation between spin and orbit poles, varies over a time span of several million years. The current obliquity is 4.3 degrees, which means that there are some regions near the poles which do not receive any direct Sunlight. The Dawn mission has provided an improved estimate of the spin pole orientation, and of the low degree gravity field. That allows us to estimate the rate at which the spin pole precesses about the instantaneous orbit pole.The orbit of Ceres is secularly perturbed by the planets, with Jupiter's influence dominating. The current inclination of the orbit plane, relative to the ecliptic, is 10.6 degrees. However, it varies between 7.27 and 11.78 degrees, with dominant periods of 22.1 and 39.6 kyr. The spin pole precession rate parameter has a period of 205 kyr, with current uncertainty of 3%, dominated by uncertainty in the mean moment of inertia of Ceres.The obliquity varies, with a dominant period of 24.5 kyr, with maximum values near 26 degrees, and minimum values somewhat less than the present value. Ceres is currently near to a minimum of its secular obliquity variations.The near-surface thermal environment thus has at least 3 important time scales: diurnal (9.07 hours), annual (4.60 years), and obliquity cycle (24.5 kyr). The annual thermal wave likely only penetrates a few meters, but the much long thermal wave associated with the obliquity cycle has a skin depth larger by a factor of 70 or so, depending upon thermal properties in the subsurface.

  8. A simple oblique dip model for geomagnetic micropulsations

    Directory of Open Access Journals (Sweden)

    J. A. Lawrie

    Full Text Available It is pointed out that simple models adopted so far have tended to neglect the obliquity of the magnetic field lines entering the Earth's surface. A simple alternative model is presented, in which the ambient field lines are straight, but enter wedge shaped boundaries at half a right-angle. The model is illustrated by assuming an axially symmetric, compressional, impulse type disturbance at the outer boundary, all other boundaries being assumed to be perfectly conducting. The numerical method used is checked from the instant the excitation ceases, by an analytical method. The first harmonic along field lines is found to be of noticeable size, but appears to be mainly due to coupling with the fundamental, and with the first harmonic across field lines.

    Key words. Magnetospheric physics (MHD waves and instabilities.

  9. Ice Particle Impacts on a Moving Wedge

    Science.gov (United States)

    Vargas, Mario; Struk, Peter M.; Kreeger, Richard E.; Palacios, Jose; Iyer, Kaushik A.; Gold, Robert E.

    2014-01-01

    This work presents the results of an experimental study of ice particle impacts on a moving wedge. The experiment was conducted in the Adverse Environment Rotor Test Stand (AERTS) facility located at Penn State University. The wedge was placed at the tip of a rotating blade. Ice particles shot from a pressure gun intercepted the moving wedge and impacted it at a location along its circular path. The upward velocity of the ice particles varied from 7 to 12 meters per second. Wedge velocities were varied from 0 to 120 meters per second. Wedge angles tested were 0 deg, 30 deg, 45 deg, and 60 deg. High speed imaging combined with backlighting captured the impact allowing observation of the effect of velocity and wedge angle on the impact and the post-impact fragment behavior. It was found that the pressure gun and the rotating wedge could be synchronized to consistently obtain ice particle impacts on the target wedge. It was observed that the number of fragments increase with the normal component of the impact velocity. Particle fragments ejected immediately after impact showed velocities higher than the impact velocity. The results followed the major qualitative features observed by other researchers for hailstone impacts, even though the reduced scale size of the particles used in the present experiment as compared to hailstones was 4:1.

  10. Analysis of vastus lateralis and vastus medialis oblique muscle activation during squat exercise with and without a variety of tools in normal adults

    Science.gov (United States)

    Lee, Tae-kyung; Park, So-mi; Yun, Sae-bom; Lee, Ae-ran; Lee, Yun-seob; Yong, Min-sik

    2016-01-01

    [Purpose] The present study investigated the effects of squat exercises with and without a variety of tools including a gym ball, wedge, and elastic band on the vastus lateralis and vastus medialis oblique muscles. [Subjects and Methods] A total of twenty healthy subjects with no history of neurological, musculoskeletal injury, or pain in the lower extremities were recruited. All subjects performed four types of exercise (conventional squat exercise, squat exercise with a gym ball, squat exercise with a wedge, squat exercise with an elastic band). [Results] There were no significant differences between exercises in comparison of the vastus lateralis muscle activity. In the squat exercise with a wedge, significantly higher activity of the vastus medialis oblique muscle was found compared with in the squat exercise with an elastic band. [Conclusion] The present study suggests that the conventional squat exercise can be one of the useful interventions for patients with patellofemoral pain syndrome. PMID:27134414

  11. Supersonic flow onto solid wedges, multidimensional shock waves and free boundary problems

    Science.gov (United States)

    Chen, Gui-Qiang

    2017-08-01

    When an upstream steady uniform supersonic flow impinges onto a symmetric straight-sided wedge, governed by the Euler equations, there are two possible steady oblique shock configurations if the wedge angle is less than the detachment angle -- the steady weak shock with supersonic or subsonic downstream flow (determined by the wedge angle that is less or larger than the sonic angle) and the steady strong shock with subsonic downstream flow, both of which satisfy the entropy condition. The fundamental issue -- whether one or both of the steady weak and strong shocks are physically admissible solutions -- has been vigorously debated over the past eight decades. In this paper, we survey some recent developments on the stability analysis of the steady shock solutions in both the steady and dynamic regimes. For the static stability, we first show how the stability problem can be formulated as an initial-boundary value type problem and then reformulate it into a free boundary problem when the perturbation of both the upstream steady supersonic flow and the wedge boundary are suitably regular and small, and we finally present some recent results on the static stability of the steady supersonic and transonic shocks. For the dynamic stability for potential flow, we first show how the stability problem can be formulated as an initial-boundary value problem and then use the self-similarity of the problem to reduce it into a boundary value problem and further reformulate it into a free boundary problem, and we finally survey some recent developments in solving this free boundary problem for the existence of the Prandtl-Meyer configurations that tend to the steady weak supersonic or transonic oblique shock solutions as time goes to infinity. Some further developments and mathematical challenges in this direction are also discussed.

  12. Three-dimensional thermal structure of subduction zones. Effects of obliquity and curvature

    Energy Technology Data Exchange (ETDEWEB)

    Bengtson, A.K.; Van Keken, P.E. [Michigan Univ., Ann Arbor, MI (United States). Dept. of Earth and Environmental Sciences

    2012-07-01

    Quantifying the precise thermal structure of subduction zones is essential for understanding the nature of metamorphic dehydration reactions, arc volcanism, and intermediate depth seismicity. High resolution twodimensional (2-D) models have shown that the rheology of the mantle wedge plays a critical role and establishes strong temperature gradients in the slab. The influence of threedimensional (3-D) subduction zone geometry on thermal structure is however not yet well characterized. A common assumption for 2-D models is that the cross-section is taken normal to the strike of the trench with a corresponding velocity reduction in the case of oblique subduction, rather than taken parallel to velocity. A comparison between a full 3-D Cartesian model with oblique subduction and selected 2-D cross-sections demonstrates that the trench-normal crosssection provides a better reproduction of the slab thermal structure than the velocity-parallel cross-section. An exception is found in the case of a strongly curved trench, such as in the Marianas, where strong 3-D flow in the mantle wedge is generated. In this case it is shown that the full 3-D model should be evaluated for an accurate prediction of the slab thermal structure. The models demonstrate that the use of a dynamic slab and wedge, separated by a kinematic boundary, yields good results for describing slab velocities in 3-D. (orig.)

  13. Three-dimensional thermal structure of subduction zones: effects of obliquity and curvature

    Directory of Open Access Journals (Sweden)

    A. K. Bengtson

    2012-11-01

    Full Text Available Quantifying the precise thermal structure of subduction zones is essential for understanding the nature of metamorphic dehydration reactions, arc volcanism, and intermediate depth seismicity. High resolution two-dimensional (2-D models have shown that the rheology of the mantle wedge plays a critical role and establishes strong temperature gradients in the slab. The influence of three-dimensional (3-D subduction zone geometry on thermal structure is however not yet well characterized. A common assumption for 2-D models is that the cross-section is taken normal to the strike of the trench with a corresponding velocity reduction in the case of oblique subduction, rather than taken parallel to velocity. A comparison between a full 3-D Cartesian model with oblique subduction and selected 2-D cross-sections demonstrates that the trench-normal cross-section provides a better reproduction of the slab thermal structure than the velocity-parallel cross-section. An exception is found in the case of a strongly curved trench, such as in the Marianas, where strong 3-D flow in the mantle wedge is generated. In this case it is shown that the full 3-D model should be evaluated for an accurate prediction of the slab thermal structure. The models demonstrate that the use of a dynamic slab and wedge, separated by a kinematic boundary, yields good results for describing slab velocities in 3-D.

  14. Differential wedging of vertebral body and intervertebral disc in thoracic and lumbar spine in adolescent idiopathic scoliosis – A cross sectional study in 150 patients

    Directory of Open Access Journals (Sweden)

    Kim Hak-Jun

    2008-08-01

    Full Text Available Abstract Background Hueter-Volkmann's law regarding growth modulation suggests that increased pressure on the end plate of bone retards the growth (Hueter and conversely, reduced pressure accelerates the growth (Volkmann. Literature described the same principle in Rat-tail model. Human spine and its deformity i.e. scoliosis has also same kind of pattern during the growth period which causes wedging in disc or vertebral body. Methods This cross sectional study in 150 patients of adolescent idiopathic scoliosis was done to evaluate vertebral body and disc wedging in scoliosis and to compare the extent of differential wedging of body and disc, in thoracic and lumbar area. We measured wedging of vertebral bodies and discs, along with two adjacent vertebrae and disc, above and below the apex and evaluated them according to severity of curve (curve 30° to find the relationship of vertebral body or disc wedging with scoliosis in thoracic and lumbar spine. We also compared the wedging and rotations of vertebrae. Results In both thoracic and lumbar curves, we found that greater the degree of scoliosis, greater the wedging in both disc and body and the degree of wedging was more at apex supporting the theory of growth retardation in stress concentration area. However, the degree of wedging in vertebral body is more than the disc in thoracic spine while the wedging was more in disc than body in lumbar spine. On comparing the wedging with the rotation, we did not find any significant relationship suggesting that it has no relation with rotation. Conclusion From our study, we can conclude that wedging in disc and body are increasing with progression on scoliosis and maximum at apex; however there is differential wedging of body and disc, in thoracic and lumbar area, that is vertebral body wedging is more profound in thoracic area while disc wedging is more profound in lumbar area which possibly form 'vicious cycle' by asymmetric loading to spine for the

  15. Classical Aberration And Obliquation

    CERN Document Server

    Adewole, A I A

    2002-01-01

    This is the first of several monographs to be devoted to the optics of accelerated systems. They are being published for the benefit of those who may wish to have another way of looking at kineoptical problems, and also to demonstrate that the laws of optics are unwavering in their support of the view that extragalactic redshifts need not be velocity doppler shifts nor cosmological recession shifts. In the latter context the first few monographs of the series may be viewed as providing a basis for the demonstration to be given in a latter monograph.

  16. On the Tidal Dissipation of Obliquity

    CERN Document Server

    Rogers, T M

    2013-01-01

    We investigate tidal dissipation of obliquity in hot Jupiters. Assuming an initial random orientation of obliquity and parameters relevant to the observed population, the obliquity of hot Jupiters does not evolve to purely aligned systems. In fact, the obliquity evolves to either prograde, retrograde or 90^{o} orbits where the torque due to tidal perturbations vanishes. This distribution is incompatible with observations which show that hot jupiters around cool stars are generally aligned. This calls into question the viability of tidal dissipation as the mechanism for obliquity alignment of hot Jupiters around cool stars.

  17. Habitable Climates: The Influence of Obliquity

    CERN Document Server

    Spiegel, David S; Scharf, Caleb A

    2008-01-01

    Without the stabilizing influence of the Moon, the Earth's obliquity could vary significantly. Extrasolar terrestrial planets with the potential to host life may therefore have large obliquities or be subject to strong obliquity variations. We revisit the habitability of oblique planets with an energy balance climate model (EBM) allowing for dynamical transitions to ice-covered snowball states as a result of ice-albedo feedback. Despite the great simplicity of our EBM, it captures reasonably well the seasonal cycle of global energetic fluxes at Earth's surface. It also performs satisfactorily against a full-physics climate model of a highly oblique Earth, in an unusual regime of circulation dominated by heat transport from the poles to the equator. Climates on oblique terrestrial planets can violate global radiative balance through much of their seasonal cycle, which limits the usefulness of simple radiative equilibrium arguments. High obliquity planets have severe climates, with large amplitude seasonal vari...

  18. Optical dating of relict sand wedges and composite-wedge pseudomorphs in Flanders, Belgium

    DEFF Research Database (Denmark)

    Buylaert, Jan-Pieter; Ghysels, Günther; Murray, Andrew S.;

    2009-01-01

    We report on quartz Optically Stimulated Luminescence (OSL) dating of the infill of 14 relict sand wedges and composite-wedge pseudomorphs at 5 different sites in Flanders, Belgium. A laboratory dose recovery test indicates that the single-aliquot regenerative-dose (SAR) procedure is suitable...... appear to have been commonplace in Flanders during the Late Pleniglacial (Oxygen Isotope Stage 2; OIS2); more specifically, around the Last Glacial Maximum (LGM, similar to 21 kyr ago) and the transition period between the LGM and the start of the Lateglacial (similar to 15 kyr ago). Optical dating...... at one site has revealed two significantly older wedge levels, the younger inset into the older; the younger wedge has an age of 36 +/- 4 kyr (Middle Pleniglacial; OIS3), the older wedge 129 +/- 11 kyr, which points to formation during the Late Saalian (OIS6). Our OSL ages of the wedges and host...

  19. Momentum transfer from oblique impacts

    Science.gov (United States)

    Schultz, Peter H.; Gault, Donald E.

    1987-05-01

    A completely satisfactory experiment would be in a low gravity environment where the effect of momentum imparted by ejecta impacting the surface can be removed or controlled from momentum transfer during impact. Preliminary estimates can be made using a ballistic pendulum. Such experiments were initiated at the NASA-Ames Vertical Gun Range in order to examine momentum transfer due to impact vaporization for oblique impacts. The preliminary results indicate that momentum from oblique impacts is very inefficient: decreasing with increasing impact velocity and perhaps size; increasing with decreasing density; and increasing with increasing impact angle. At face value, such results minimize the effect of momentum transfer by grazing impact; the more probable impact angles of 30 deg would have a greater effect, contrary to the commonly held impression.

  20. Anaglyph videoanimations from oblique stereoimages

    Science.gov (United States)

    Vozenilek, Vit; Kralik, Tomas

    2015-03-01

    The paper deals with the approach of compiling of animations from a pair of oblique stereoimages. The authors investigated as simple and cheap way as possible to develop such approach which will be available for wide scope of ordinary users with common equipment. They concentrated on three procedures of oblique stereoimage handling to compile sets of images, animations and analogue documents. After capturing construction site by a pair of web cameras the data were corrected, photogrammetrically adjusted (due to radial distortion) and exported. Firstly, a set of anaglyphic images were compiled, then they were trimmed and timeline was inserted. The final anaglyph animations are compiled in various versions. In addition, an anaglyphic book containing 150 images was created in a special way that the user can easily browse through its content. The main outputs are several unique anaglyph products, but more beneficial outputs are developed procedures of anaglyph visualization that can be applied with minor modifications to photographing of any objects.

  1. Use of Wedge Absorbers in MICE

    Energy Technology Data Exchange (ETDEWEB)

    Neuffer, D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Summers, D. [Univ. of Mississippi, Oxford, MS (United States); Mohayai, T. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); IIT, Chicago, IL (United States); Snopok, P. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); IIT, Chicago, IL (United States); Rogers, C. [Science and Technology Facilities Council (STFC), Oxford (United Kingdom). Rutherford Appleton Lab. (RAL)

    2017-03-01

    Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse–longitudinal emittance exchanges within present and future operational conditions. The same wedge can be used to explore “direct” and “reverse” emittance exchange dynamics, where direct indicates a configuration that reduces momentum spread and reverse is a configuration that increases momentum spread. Analytical estimated and ICOOL and G4BeamLine simulations of the exchanges at MICE parameters are presented. Large exchanges can be obtained in both reverse and direct configurations.

  2. Benchmarking numerical models of brittle thrust wedges

    NARCIS (Netherlands)

    Buiter, Susanne J H; Schreurs, Guido; Albertz, Markus; Gerya, Taras V.; Kaus, Boris; Landry, Walter; le Pourhiet, Laetitia; Mishin, Yury; Egholm, David L.; Cooke, Michele; Maillot, Bertrand; Thieulot, Cedric|info:eu-repo/dai/nl/270177493; Crook, Tony; May, Dave; Souloumiac, Pauline; Beaumont, Christopher

    2016-01-01

    We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the

  3. Stability of oblique shock front

    Institute of Scientific and Technical Information of China (English)

    CHEN; Shuxing(陈恕行)

    2002-01-01

    The stability of the weak planar oblique shock front with respect to the perturbation of the wall is discussed. By the analysis of the formation and the global construction of shock and its asymptotic behaviour for stationary supersonic flow along a smooth rigid wall we obtain the stability of the solution containing a weak planar shock front. The stability can be used to single out a physically reasonable solution together with the entropy condition.

  4. A specially curved wedge for eliminating wedge angle effect in unsteady shock reflection

    Science.gov (United States)

    Wang, He; Zhai, Zhigang; Luo, Xisheng; Yang, Jiming; Lu, Xiyun

    2017-08-01

    A curved wedge with a specific shape is designed and manufactured to guarantee the wedge angle unvaried during the cylindrically converging shock moving along the wedge. Thus the variation of the wedge angle caused by the wedge will be eliminated in unsteady shock reflection. Different initial wedge angles are considered to observe regular reflection and Mach reflection. When Mach reflection occurs, it is found that direct Mach reflection is persisted over the wedge without wave pattern transitions, which differs from our previous work with varied wedge angles [Zhang et al. "Reflection of cylindrical converging shock wave over a plane wedge," Phys. Fluids 28, 086101 (2016)]. Moreover, the Mach stem is nearly straight when the wedge angle is relatively large, and the trajectory of triple point can be well predicted by three-shock theory. It is believed that the straight Mach stem results from the coupling effect of the converging shock and the convexly curved wedge, which exert opposite effects on the Mach stem curvature. As the wedge angle reduces, the three-shock theory prediction deviates from the present results owing to the curved Mach stem. Stronger vortices are produced near the wall, which are caused by the interaction of two shear layers, and whether the stronger vortices will be generated near the wall depends on the reflection number of the shock wave over the tube wall and wedge. The length of disturbed shock front in the Mach reflection is found to increase nonlinearly due to the unsteady feature of the flow. The growth rate of length reduces as the shock converges because of the geometrical contraction effect. Further the lengths of the Mach stem and the disturbed shock front are compared, and the results show that although the difference exists between them, both of them show a similar variation tendency. Compared with our previous work with varied wedge angles, the variation of the wedge angle has great effects on the Mach stem length and wave

  5. Mantle wedge dynamics from seismic anisotropy (Invited)

    Science.gov (United States)

    Long, M. D.; Wirth, E. A.

    2013-12-01

    The mantle wedge above subducting slabs plays a critical role in many of the physical processes associated with subduction, including water transport into the upper mantle and the generation and transport of melts. Our understanding of mantle wedge dynamics is incomplete; in particular, the mantle flow field above subducting slabs remains poorly understood. Because seismic anisotropy is a consequence of deformation, observations of anisotropy (such as shear wave splitting and P-to-SH converted waves) can constrain the geometry of the wedge flow field. Additionally, because the presence of water (either in nominally anhydrous minerals or as hydrous phases) can have a large effect on anisotropic structure, a detailed understanding of mantle wedge anisotropy can help to constrain processes related to water cycling in subduction systems. We present a global, synoptic view of anisotropy observations in subduction zone mantle wedges, compiled from a large number of individual studies, with the goal of understanding the first-order controls on wedge anisotropy and flow patterns. This compilation allows us to explicitly test the predictions made by many different conceptual models for wedge anisotropy, as well as to explore the relationships between observed anisotropy parameters and other parameters that describe subduction. We find that no simple model can explain all of the trends observed in the global data set. Mantle wedge flow is likely controlled by a combination of downdip motion of the slab, trench migration, ambient mantle flow, small-scale convection, proximity to slab edges, and slab morphology, with the relative contributions of these in any given subduction system controlled by the subduction kinematics and mantle rheology. There is also a likely contribution from B-type olivine and/or serpentinite fabric in many subduction zones, governed by the local thermal structure and volatile distribution.

  6. Long-range hybrid wedge plasmonic waveguide.

    Science.gov (United States)

    Zhang, Zhonglai; Wang, Jian

    2014-11-03

    We design a novel long-range hybrid wedge plasmonic (LRHWP) waveguide composed of two identical dielectric nanowires symmetrically placed on two opposed wedges of a diamond shaped metal wire. With strong coupling between the dielectric nanowire mode and long-range surface plasmon polariton (SPP) mode, both deep subwavelength mode confinement and low propagation loss are achieved. On one hand, when compared to the previous long-range hybrid SPP waveguide, LRHWP waveguide can achieve smaller mode size with similar propagation length; on the other hand, when compared to the previous hybrid wedge SPP waveguide, LRHWP waveguide can provide an order of magnitude longer propagation length with similar level of mode confinement. The designed LRHWP waveguide also features an overall advantage of one-order improvement of Figure of Merit. We further evaluate in detail the impacts of possible practical fabrication imperfections on the mode properties. The obtained results of mode properties show that the proposed LRHWP waveguide with an optimized wedge tip angle of 140 degree is fairly tolerant to practical fabrication errors in geometry parameters such as misalignment in the horizontal direction, asymmetry in the vertical direction, variation of wedge tip angle, tilt or rotation of metal wire, and variation of wedge tip curvature radius.

  7. A computational study on oblique shock wave-turbulent boundary layer interaction

    Science.gov (United States)

    Joy, Md. Saddam Hossain; Rahman, Saeedur; Hasan, A. B. M. Toufique; Ali, M.; Mitsutake, Y.; Matsuo, S.; Setoguchi, T.

    2016-07-01

    A numerical computation of an oblique shock wave incident on a turbulent boundary layer was performed for free stream flow of air at M∞ = 2.0 and Re1 = 10.5×106 m-1. The oblique shock wave was generated from a 8° wedge. Reynolds averaged Navier-Stokes (RANS) simulation with k-ω SST turbulence model was first utilized for two dimensional (2D) steady case. The results were compared with the experiment at the same flow conditions. Further, to capture the unsteadiness, a 2D Large Eddy Simulation (LES) with sub-grid scale model WMLES was performed which showed the unsteady effects. The frequency of the shock oscillation was computed and was found to be comparable with that of experimental measurement.

  8. Studying wedge factors and beam profiles for physical and enhanced dynamic wedges

    Directory of Open Access Journals (Sweden)

    Ahmad Misbah

    2010-01-01

    Full Text Available This study was designed to investigate variation in Varian′s Physical and Enhanced Dynamic Wedge Factors (WF as a function of depth and field size. The profiles for physical wedges (PWs and enhanced dynamic wedges (EDWs were also measured using LDA-99 array and compared for confirmation of EDW angles at different depths and field sizes. WF measurements were performed in water phantom using cylindrical 0.66 cc ionization chamber. WF was measured by taking the ratio of wedge and open field ionization data. A normalized wedge factor (NWF was introduced to circumvent large differences between wedge factors for different wedge angles. A strong linear dependence of PW Factor (PWF with depth was observed. Maximum variation of 8.9% and 4.1% was observed for 60° PW with depth at 6 and 15 MV beams respectively. The variation in EDW Factor (EDWF with depth was almost negligible and less than two per cent. The highest variation in PWF as a function of field size was 4.1% and 3.4% for thicker wedge (60° at 6 and 15 MV beams respectively and decreases with decreasing wedge angle. EDWF shows strong field size dependence and significant variation was observed for all wedges at both photon energies. Differences in profiles between PW and EDW were observed on toe and heel sides. These differences were dominant for larger fields, shallow depths, thicker wedges and low energy beam. The study indicated that ignoring depth and field size dependence of WF may result in under/over dose to the patient especially doing manual point dose calculation.

  9. Opening- and Closing-Wedge Distal Femoral Osteotomy

    Science.gov (United States)

    Chahla, Jorge; Mitchell, Justin J.; Liechti, Daniel J.; Moatshe, Gilbert; Menge, Travis J.; Dean, Chase S.; LaPrade, Robert F.

    2016-01-01

    Background: Lateral compartment osteoarthritis of the knee can be a challenging pathology in the younger, active population due to limited treatment options and high patient expectations. Distal femoral osteotomy (DFO) has been reported to be a potential treatment option. Purpose: To perform a systematic review on the survival, outcomes, and complications of DFO for treatment of genu valgum with concomitant lateral compartment osteoarthritis of the knee. Study Design: Systematic review; Level of evidence, 4. Methods: A systematic review of the literature was performed using the Cochrane Database of Systematic Reviews, the Cochrane Central Registry of Controlled Trials, PubMed, and MEDLINE from 1980 to present. Inclusion criteria were as follows: outcomes of opening- and closing-wedge DFOs performed for treatment of genu valgum with concomitant lateral compartment osteoarthritis of the knee, English language, minimum 2-year follow-up, and human studies. Data abstracted from the selected studies included type of osteotomy (opening vs closing), survival rate, patient-reported and radiographic outcomes, and complications. Results: Fourteen studies met the inclusion criteria and were considered for the review. A total of 9 closing-wedge and 5 opening-wedge DFO studies were included. All were retrospective studies and reported good to excellent patient-reported outcomes after DFO. Survival decreased with increasing time from surgery, with 1 study reporting a 100% survival rate at 6.5 years, compared with 21.5% at 20 years in another study. A low rate of complications was reported throughout the review. Conclusion: Highly heterogeneous literature exists for both opening- and closing-wedge DFOs for the treatment of isolated lateral compartment osteoarthritis with valgus malalignment. A mean survival rate of 80% at 10-year follow-up was reported, supporting that this procedure can be a viable treatment option to delay or reduce the need for joint arthroplasty. A low

  10. Wafer scale oblique angle plasma etching

    Energy Technology Data Exchange (ETDEWEB)

    Burckel, David Bruce; Jarecki, Jr., Robert L.; Finnegan, Patrick Sean

    2017-05-23

    Wafer scale oblique angle etching of a semiconductor substrate is performed in a conventional plasma etch chamber by using a fixture that supports a multiple number of separate Faraday cages. Each cage is formed to include an angled grid surface and is positioned such that it will be positioned over a separate one of the die locations on the wafer surface when the fixture is placed over the wafer. The presence of the Faraday cages influences the local electric field surrounding each wafer die, re-shaping the local field to be disposed in alignment with the angled grid surface. The re-shaped plasma causes the reactive ions to follow a linear trajectory through the plasma sheath and angled grid surface, ultimately impinging the wafer surface at an angle. The selected geometry of the Faraday cage angled grid surface thus determines the angle at with the reactive ions will impinge the wafer.

  11. Mantle wedge serpentinization effects on slab dips

    Directory of Open Access Journals (Sweden)

    Eh Tan

    2017-01-01

    Full Text Available The mechanical coupling between a subducting slab and the overlying mantle wedge is an important factor in controlling the subduction dip angle and the flow in mantel wedge. This paper investigates the role of the amount of mantle serpentinization on the subduction zone evolution. With numerical thermos-mechanical models with elasto-visco-plastic rheology, we vary the thickness and depth extent of mantle serpentinization in the mantle wedge to control the degree of coupling between the slab and mantle wedge. A thin serpentinized mantle layer is required for stable subduction. For models with stable subduction, we find that the slab dip is affected by the down-dip extent and the mantle serpentinization thickness. A critical down-dip extent exists in mantle serpentinization, determined by the thickness of the overriding lithosphere. If the down-dip extent does not exceed the critical depth, the slab is partially coupled to the overriding lithosphere and has a constant dip angle regardless of the mantle serpentinization thickness. However, if the down-dip extent exceeds the critical depth, the slab and the base of the overriding lithosphere would be separated and decoupled by a thick layer of serpentinized peridotite. This allows further slab bending and results in steeper slab dip. Increasing mantle serpentinization thickness will also result in larger slab dip. We also find that with weak mantle wedge, there is no material flowing from the asthenosphere into the serpentinized mantle wedge. All of these results indicate that serpentinization is an important ingredient when studying the subduction dynamics in the mantle wedge.

  12. The chaotic obliquity of Mars

    Science.gov (United States)

    Touma, Jihad; Wisdom, Jack

    1993-01-01

    The discovery (by Laskar, 1989, 1990) that the evolution of the solar system is chaotic, made in a numerical integration of the averaged secular approximation of the equations of motions for the planets, was confirmed by Sussman and Wisdom (1992) by direct numerical integration of the whole solar system. This paper presents results of direct integrations of the rotation of Mars in the chaotically evolved planetary system, made using the same model as that used by Sussman and Wisdom. The numerical integration shows that the obliquity of Mars undergoes large chaotic variations, which occur as the system evolves in the chaotic zone associated with a secular spin-orbit resonance.

  13. Wedged tibial components for total knee arthroplasty.

    Science.gov (United States)

    Jeffery, R S; Orton, M A; Denham, R A

    1994-08-01

    Severe coronal deformity of the knee is frequently associated with erosion of one tibial condyle. This can cause problems with fixation and alignment during total knee arthroplasty. If the tibia is cut to the level of the more worn side, valuable bone is sacrificed; if the less worn side is chosen, the deficiency must be filled with bone--graft, cement, or a prosthesis. Tibial components with an integral polyethylene wedge on the undersurface were introduced in 1980 for use in patients with a bony deficit on one tibial condyle. The authors believe that the Denham prosthesis (Biomet, Wales, U.K.) was the first knee arthroplasty to offer such spacers. Twenty-six patients with preoperative varus deformity in whom a wedged component was used were compared with 29 historic control subjects. None of the wedged components loosened after a median follow-up period of 8 years compared with loosening in five of the control subjects (P = .01). In three of the control subjects a fractured triangle of cement was present on the radiographs. Use of the wedges was not accompanied by an improvement in postoperative alignment. The authors conclude that the wedges resulted in improved fixation that was independent of postoperative alignment.

  14. Long polymers near wedges and cones

    Science.gov (United States)

    Hammer, Yosi; Kantor, Yacov

    2015-12-01

    We perform a Monte Carlo study of N -step self-avoiding walks, attached to the corner of an impenetrable wedge in two dimensions (d =2 ), or the tip of an impenetrable cone in d =3 , of sizes ranging up to N =106 steps. We find that the critical exponent γα, which determines the dependence of the number of available conformations on N for a cone or wedge with opening angle α , is in good agreement with the theory for d =2 . We study the end-point distribution of the walks in the allowed space and find similarities to the known behavior of random walks (ideal polymers) in the same geometry. For example, the ratio between the mean square end-to-end distances of a polymer near the cone or wedge and a polymer in free space depends linearly on γα, as is known for ideal polymers. We show that the end-point distribution of polymers attached to a wedge does not separate into a product of angular and radial functions, as it does for ideal polymers in the same geometry. The angular dependence of the end position of polymers near the wedge differs from theoretical predictions.

  15. Commissioning, clinical implementation and quality assurance of Siemen's Virtual Wedge.

    Science.gov (United States)

    Rathee, S; Kwok, C B; MacGillivray, C; Mirzaei, M

    1999-01-01

    This report presents the results of commissioning, clinical implementation and quality assurance of Siemens Virtual Wedge. Our measurements show that: (1) wedge factors are within 2% of unity, (2) percentage depth doses are within 1% of open beam data, and (3) wedged beam profiles can be modeled similarly to a physical wedge and follow a well defined equation to facilitate modeling of an arbitrary wedge angle. The gantry angle dependence of wedge profiles is similar to open beam profiles. The output of wedged fields is linear with delivered monitor units within 1%. Quality assurance results indicate the wedge profiles are very stable over time. Day to day variations of two points measured along the wedge gradient direction are within 1.5%.

  16. Structure of turbulent wedges created by isolated surface roughness

    Science.gov (United States)

    Kuester, Matthew S.; White, Edward B.

    2016-04-01

    Isolated surface roughness in a laminar boundary layer can create a wedge of turbulence that spreads laterally into the surrounding laminar flow. Some recent studies have identified high- and low-speed streaks along the exterior of turbulent wedges. In this experiment, developing turbulent wedges are measured to observe the creation of these streaks. Naphthalene shear stress surface visualization and hotwire measurements are utilized to investigate the details of turbulent wedges created by cylinders in a laminar flat-plate boundary layer. Both the surface visualization and the hotwire measurements show high- and low-speed streaks in the wake of the cylinder that devolve into a turbulent wedge. The turbulent wedge spreading is associated with the emergence of these high- and low-speed streaks along the outside of the wedge. As the wedge evolves in the streamwise direction, these streaks persist inside of the core of the wedge, while new, lower amplitude streaks form along the outside of the wedge. Adding asymmetry to the cylinder moved the virtual origin closer to the roughness and increased the vortex shedding frequency, while adding small-scale roughness features did not strongly affect turbulent wedge development. Intermittency calculations additionally show the origin of the turbulent core inside of the wedge. The structure and spacing of the high-speed streaks along the extremities of the turbulent wedge give insight into the spreading angle of the turbulent wedge.

  17. Explicit reconstruction of the entanglement wedge

    CERN Document Server

    Kim, Jung-Wook

    2016-01-01

    The problem of bulk locality, or how the boundary encodes the bulk in AdS/CFT, is still a subject of study today. One of the major issues that needs more elucidation is the problem of subregion duality; what information of the bulk a given boundary subregion encodes. Although proofs given by two teams of researchers, Dong, Harlow, and Wall and Bao, and Kim, state that the entanglement wedge of the bulk should be reconstructible from boudnary subregions, no explicit procedure for reconstructing the entanglement wedge was as of yet given. In this paper, mode sum approach to obtaining smearing functions is generalised to include bulk reconstruction in the entanglement wedge of boundary subregions. It is generally expectated that solutions to the wave equation on a complicated coordinate patch are needed, but this hard problem has been transferred to a less hard but tractable problem of matrix inversion.

  18. Non-Newtonian viscosity wedge in film formation of EHL

    Institute of Scientific and Technical Information of China (English)

    GUOF.; WONGP.L.

    2001-01-01

    This paper aims to evaluate the action of viscosity wedge in the oil film formation ofEHL at opposite sliding and zero entrainment. Using solvers developed for Newtonian and Eyringfluids, the film formation behavior originating from viscosity wedge is investigated. The numericalsimulation displays that lubricant film formation induced by viscosity wedge is different from that bythe well-known geometrical wedge with entrainment in classic EHL. The numerical analyses showthat at high opposite sliding speed the viscosity wedge acts as a leading role in film formation, thenon-Newtonian effects can have a pronounced influence on action of the viscosity wedge.

  19. A review of dynamics modelling of friction wedge suspensions

    Science.gov (United States)

    Wu, Qing; Cole, Colin; Spiryagin, Maksym; Sun, Yan Quan

    2014-11-01

    Three-piece bogies with friction wedge suspensions are the most widely used bogies in heavy haul trains. Fiction wedge suspensions play a key role in these wagon systems. This article reviews current techniques in dynamic modelling of friction wedge suspension with various motivations: to improve dynamic models of friction wedge suspensions so as to improve general wagon dynamics simulations; to seek better friction wedge suspension models for wagon stability assessments in complex train systems; to improve the modelling of other friction devices, such as friction draft gear. Relevant theories and friction wedge suspension models developed by using commercial simulation packages and in-house simulation packages are reviewed.

  20. Graphene Plasmons in Triangular Wedges and Grooves

    DEFF Research Database (Denmark)

    Gonçalves, P. A. D.; Dias, E. J. C.; Xiao, Sanshui

    2016-01-01

    and electric-field distributions. We have found that the dispersion of wedge/groove graphene plasmons follows the same functional dependence as their flat-graphene plasmon counterparts, but now scaled by a (purely) geometric factor in which all the information about the system’s geometry is contained. We...... and tunability of graphene plasmons guided along the apex of a graphene-covered dielectric wedge or groove. In particular, we present a quasi-analytic model to describe the plasmonic eigenmodes in such a system, including the complete determination of their spectrum and corresponding induced potential...

  1. Obliquity forcing of low-latitude climate

    NARCIS (Netherlands)

    Bosmans, J.H.C.; Hilgen, F.J.; Tuenter, Erik; Lourens, L.J.

    2015-01-01

    The influence of obliquity, the tilt of the Earth's rotational axis, on incoming solar radiation at low latitudes is small, yet many tropical and subtropical palaeoclimate records reveal a clear obliquity signal. Several mechanisms have been proposed to explain this signal, such as the remote

  2. Obliquity forcing of low-latitude climate

    NARCIS (Netherlands)

    Bosmans, J.H.C.; Hilgen, F.J.; Tuenter, Erik; Lourens, L.J.

    2015-01-01

    The influence of obliquity, the tilt of the Earth's rotational axis, on incoming solar radiation at low latitudes is small, yet many tropical and subtropical palaeoclimate records reveal a clear obliquity signal. Several mechanisms have been proposed to explain this signal, such as the remote influe

  3. Analysis of Knee Joint Line Obliquity after High Tibial Osteotomy.

    Science.gov (United States)

    Oh, Kwang-Jun; Ko, Young Bong; Bae, Ji Hoon; Yoon, Suk Tae; Kim, Jae Gyoon

    2016-11-01

    The aim of this study was to evaluate which lower extremity alignment (knee and ankle joint) parameters affect knee joint line obliquity (KJLO) in the coronal plane after open wedge high tibial osteotomy (OWHTO). Overall, 69 knees of patients that underwent OWHTO were evaluated using radiographs obtained preoperatively and from 6 weeks to 3 months postoperatively. We measured multiple parameters of knee and ankle joint alignment (hip-knee-ankle angle [HKA], joint line height [JLH], posterior tibial slope [PS], femoral condyle-tibial plateau angle [FCTP], medial proximal tibial angle [MPTA], mechanical lateral distal femoral angle [mLDFA], KJLO, talar tilt angle [TTA], ankle joint obliquity [AJO], and the lateral distal tibial ground surface angle [LDTGA]; preoperative [-pre], postoperative [-post], and the difference between -pre and -post values [-Δ]). We categorized patients into two groups according to the KJLO-post value (the normal group [within ± 4 degrees, 56 knees] and the abnormal group [greater than ± 4 degrees, 13 knees]), and compared their -pre parameters. Multiple logistic regression analysis was used to examine the contribution of the -pre parameters to abnormal KJLO-post. The mean HKA-Δ (-9.4 ± 4.7 degrees) was larger than the mean KJLO-Δ (-2.1 ± 3.2 degrees). The knee joint alignment parameters (the HKA-pre, FCTP-pre) differed significantly between the two groups (p knee joint alignment and knee joint convergence angle evaluated by HKA-pre and FCTP-pre angle, respectively, were significant predictors of abnormal KJLO after OWHTO. However, -pre ankle joint parameters were not significantly associated with abnormal KJLO after OWHTO.

  4. Clinical observation of the abnormality of inferior oblique tendon in congenital superior oblique muscle paralytic patients

    Directory of Open Access Journals (Sweden)

    Wei Xiao

    2013-11-01

    Full Text Available AIM: To measure the abnormality of the inferior oblique tendon in patients with congenital superior oblique muscle paralysis.METHODS: In this cross-sectional, self-control designed study, the tensity of the inferior oblique tendon of both the paralytic and nonparalytic eye were measured during the operations in 30 patients who were diagnosed with exotropia(including intermittent exotropia and constant exotropia accompanied with single superior oblique muscle paralysis. The tensity of the tendon was measured as the maximal distance of which the inferior oblique tendon could be lifted from the scleraRESULTS: Inferior oblique had different degrees of thickness, but was tougher and tighter than that of nonparalytic eye. There was a significant difference(PCONCLUSION: The inferior oblique tendon is stronger and less relaxant in the paralytic eyes.

  5. Parental arc magma compositions dominantly controlled by mantle-wedge thermal structure

    Science.gov (United States)

    Turner, Stephen J.; Langmuir, Charles H.; Katz, Richard F.; Dungan, Michael A.; Escrig, Stéphane

    2016-10-01

    The processes that lead to the fourfold variation in arc-averaged compositions of mafic arc lavas remain controversial. Control by the mantle-wedge thermal structure is supported by chemical correlations with the thickness of the underlying arc crust, which affects the thermal state of the wedge. Control by down-going slab temperature is supported by correlations with the slab thermal parameter. The Chilean Southern Volcanic Zone provides a test of these hypotheses. Here we use chemical data to demonstrate that the Southern Volcanic Zone and global arc averages define the same chemical trends, both among elements and between elements and crustal thickness. But in contrast to the global arc system, the Southern Volcanic Zone is built on crust of variable thickness with a constant slab thermal parameter. This natural experiment, along with a set of numerical simulations, shows that global arc compositional variability is dominated by different extents of melting that are controlled by the thermal structure of the mantle wedge. Slab temperatures play a subordinate role. Variations in the subducting slab's fluid flux and sediment compositions, as well as mantle-wedge heterogeneities, produce second-order effects that are manifested as distinctive trace element and isotopic signatures; these can be more clearly elucidated once the importance of wedge thermal structure is recognized.

  6. Three-dimensional vertebral wedging in mild and moderate adolescent idiopathic scoliosis.

    Directory of Open Access Journals (Sweden)

    Sophie-Anne Scherrer

    Full Text Available BACKGROUND: Vertebral wedging is associated with spinal deformity progression in adolescent idiopathic scoliosis. Reporting frontal and sagittal wedging separately could be misleading since these are projected values of a single three-dimensional deformation of the vertebral body. The objectives of this study were to determine if three-dimensional vertebral body wedging is present in mild scoliosis and if there are a preferential vertebral level, position and plane of deformation with increasing scoliotic severity. METHODOLOGY: Twenty-seven adolescent idiopathic scoliotic girls with mild to moderate Cobb angles (10° to 50° participated in this study. All subjects had at least one set of bi-planar radiographs taken with the EOS® X-ray imaging system prior to any treatment. Subjects were divided into two groups, separating the mild (under 20° from the moderate (20° and over spinal scoliotic deformities. Wedging was calculated in three different geometric planes with respect to the smallest edge of the vertebral body. RESULTS: Factorial analyses of variance revealed a main effect for the scoliosis severity but no main effect of vertebral Levels (apex and each of the three vertebrae above and below it (F = 1.78, p = 0.101. Main effects of vertebral Positions (apex and above or below it (F = 4.20, p = 0.015 and wedging Planes (F = 34.36, p<0.001 were also noted. Post-hoc analysis demonstrated a greater wedging in the inferior group of vertebrae (3.6° than the superior group (2.9°, p = 0.019 and a significantly greater wedging (p≤0.03 along the sagittal plane (4.3°. CONCLUSIONS: Vertebral wedging was present in mild scoliosis and increased as the scoliosis progressed. The greater wedging of the inferior group of vertebrae could be important in estimating the most distal vertebral segment to be restrained by bracing or to be fused in surgery. Largest vertebral body wedging values obtained in the sagittal plane support

  7. Microwave Imaging under Oblique Illumination

    Directory of Open Access Journals (Sweden)

    Qingyang Meng

    2016-07-01

    Full Text Available Microwave imaging based on inverse scattering problem has been attracting many interests in the microwave society. Among some major technical challenges, the ill-posed, multi-dimensional inversion algorithm and the complicated measurement setup are critical ones that prevent it from practical applications. In this paper, we experimentally investigate the performance of the subspace-based optimization method (SOM for two-dimensional objects when it was applied to a setup designed for oblique incidence. Analytical, simulation, and experimental results show that, for 2D objects, neglecting the cross-polarization scattering will not cause a notable loss of information. Our method can be potentially used in practical imaging applications for 2D-like objects, such as human limbs.

  8. Process Based Explanations for Correlations Between the Structural and Seismic Segmentation of the Cascadia Subduction Wedge

    Science.gov (United States)

    Fuller, C. W.; Brandon, M. T.; Willett, S. D.

    2006-12-01

    Variations in the geological and geophysical characteristics of the Cascadia subduction wedge, the region between the trench and arc, result in along-strike wedge segmentation. We focus on explaining the large-scale structural segmentation and how processes causing this segmentation influence segmentation with respect to the seismic behavior of the wedge and subduction thrust. The relationships we develop illustrate the fundamental interplay of processes controlling long-term structure and short-term seismic behavior. Our conclusions are based on the results of numerical models designed to simulate the growth and evolution of the Cascadia subduction wedge through the accretion of a thin layer of sediment to the basaltic Coast Range Terrane (CRT) of the Cascadia margin. Two aspects of wedge structural segmentation are of interest: (1) segmentation with respect to the location or absence of large, continental shelf, forearc basins, and (2) segmentation with respect to the Coastal Range (CR) structural high. Our models illustrate that the form of the submarine portion of the Cascadia wedge, including the basins or lack thereof, is a consequence of the frictional behavior of this region of wedge, subduction thrust strength, wedge strength, and dip thrust. We propose that basin segments have stronger wedge material, a weaker thrust, or a steeper thrust than basin free segments. The presence of basins is significant because they stabilize the margin and prevent subduction and accretion related deformation. This stabilization allows the thrust to preferentially support thermally induced, fluid overpressures and undergo fault healing thus increasing the likelihood of large coseismic slip within basin segments. While no historical earthquake data supporting this argument exists for Cascadia, such behavior has been observed in many margins (Song and Simons, 2003; Wells et al., 2003). It is reasonable to assume that large earthquakes in Cascadia will have the same association

  9. Benchmarking numerical models of brittle thrust wedges

    NARCIS (Netherlands)

    Buiter, Susanne J H; Schreurs, Guido; Albertz, Markus; Gerya, Taras V.; Kaus, Boris; Landry, Walter; le Pourhiet, Laetitia; Mishin, Yury; Egholm, David L.; Cooke, Michele; Maillot, Bertrand; Thieulot, Cedric; Crook, Tony; May, Dave; Souloumiac, Pauline; Beaumont, Christopher

    2016-01-01

    We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the s

  10. PARADOX SOLUTION ON ELASTIC WEDGE DISSIMILAR MATERIALS

    Institute of Scientific and Technical Information of China (English)

    姚伟岸; 张兵茹

    2003-01-01

    According to the Hellinger-Reissner variational principle and introducing proper transformation of variables, the problem on elastic wedge dissimilar materials can be led to Hamiltonian system, so the solution of the problem can be got by employing the separation of variables method and symplectic eigenfunction expansion under symplectic space, which consists of original variables and their dual variables. The eigenvalue - 1 is a special one of all symplectic eigenvalue for Hamiltonian system in polar coordinate. In general, the eigenvalue - is a single eigenvalue, and the classical solution of an elastic wedge dissimilar materials subjected to a unit concentrated couple at the vertex is got directly by solving the eigenfunction vector for eigenvalue - 1 . But the eigenvalue - 1 becomes a double eigenvalue when the vertex angles and modulus of the materials satisfy certain definite relationships and the classical solution for the stress distribution becomes infinite at this moment, that is, the paradox should occur. Here the Jordan form eigenfunction vector for eigenvalue - 1 exists, and solution of the paradox on elastic wedge dissimilar materials subjected to a unit concentrated couple at the vertex is obtained directly by solving this special Jordan form eigenfunction. The result shows again that the solutions of the special paradox on elastic wedge in the classical theory of elasticity are just Jordan form solutions in symplectic space under Hamiltonian system.

  11. Radiotherapy treatment planning with dynamic wedges--an algorithm for generating wedge factors and beam data.

    Science.gov (United States)

    Thomas, S J; Foster, K R

    1995-09-01

    If the jaws of a linear accelerator are moved under computer control during irradiation, dose distributions similar to those with wedge filters can be produced. Varian linear accelerators utilize this effect to give a 'dynamic wedge', using segmented treatment tables (STTs). An algorithm is described to generate the dose per monitor unit at any point in a beam, using the STT values. Dynamically wedged beams are modelled as the superposition of static asymmetric beams, using an algorithm based on beam data measured for symmetric beams. Predictions of wedge factors, depth doses and profiles generated using the algorithm are compared with measurements. Good agreement is found between predictions and measurements. The calculation time is typically 5 ms/dose point on a PC with a 486DX processor.

  12. A comparison of exact TM plane wave diffraction by coated wedges and impedance wedges

    DEFF Research Database (Denmark)

    Andersen, Lars S.; Breinbjerg, Olav; Moore, John T.

    1996-01-01

    without interference from direct fields or reflected fields. Results have been obtained in the case of illumination by a transverse magnetic (TM) uniform plane wave. The analysis of the coated wedge is based on an integral equation formulation combined with a hybrid technique, while the analysis......The purpose of this work is to numerically investigate the accuracy of the standard impedance boundary condition (SIBC) approximation for edge diffraction. To this end, we compare the scattering by coated wedges and SIBC wedges for which the diffracted field from a single edge can be observed...... of the SIBC wedge is based on Maliuzhinets' solution. Comparisons have been carried out for a series of configurations including lossy coatings as well as lossless coatings permitting unattenuated propagation of surface waves. The results show that the presence of an edge in a coated structure does...

  13. Benchmarking numerical models of brittle thrust wedges

    Science.gov (United States)

    Buiter, Susanne J. H.; Schreurs, Guido; Albertz, Markus; Gerya, Taras V.; Kaus, Boris; Landry, Walter; le Pourhiet, Laetitia; Mishin, Yury; Egholm, David L.; Cooke, Michele; Maillot, Bertrand; Thieulot, Cedric; Crook, Tony; May, Dave; Souloumiac, Pauline; Beaumont, Christopher

    2016-11-01

    We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the stable wedge test, showing negligible internal deformation and maintaining the initial surface slope upon horizontal translation over a frictional interface. Eight codes participated in the unstable wedge test that examines the evolution of a wedge by thrust formation from a subcritical state to the critical taper geometry. The critical taper is recovered, but the models show two deformation modes characterised by either mainly forward dipping thrusts or a series of thrust pop-ups. We speculate that the two modes are caused by differences in effective basal boundary friction related to different algorithms for modelling boundary friction. The third experiment examines stacking of forward thrusts that are translated upward along a backward thrust. The results of the seven codes that run this experiment show variability in deformation style, number of thrusts, thrust dip angles and surface slope. Overall, our experiments show that numerical models run with different numerical techniques can successfully simulate laboratory brittle thrust wedge models at the cm-scale. In more detail, however, we find that it is challenging to reproduce sandbox-type setups numerically, because of frictional boundary conditions and velocity discontinuities. We recommend that future numerical-analogue comparisons use simple boundary conditions and that the numerical Earth Science community defines a plasticity test to resolve the variability in model shear zones.

  14. Stable isotope and gas properties of two ice wedges from Cape Mamontov Klyk, Laptev Sea, Northern Siberia

    Directory of Open Access Journals (Sweden)

    T. Boereboom

    2011-12-01

    Full Text Available This paper presents and discusses the texture, fabric and gas properties (contents of total gas, O2, N2, CO2, and CH4 of two ice wedges from Cape Mamontov Klyk, Laptev Sea, Northern Siberia. The two ice wedges display contrasting structures: one being of relatively "clean" ice and the other showing clean ice at its centre as well as debris-rich ice on its sides (referred to as ice-sand wedge. A comparison of gas properties, crystal size, fabrics and stable isotope data (δ18O and δD allows discriminating between three different facies of ice with specific paleoenvironmental signatures, suggesting different climatic conditions and rates of biological activity. More specifically, total gas content and composition reveal variable intensities of meltwater infiltration and show the impact of biological processes with contrasting contributions from anaerobic and aerobic conditions. Stable isotope data are shown to be valid for discussing changes in paleoenvironmental conditions and/or decipher different sources for the snow feeding into the ice wedges with time. Our data also give support to the previous assumption that the composite ice wedge was formed in Pleistocene and the ice wedge in Holocene times. This study sheds more light on the conditions of ice wedge growth under changing environmental conditions.

  15. Orthotic Heel Wedges Do Not Alter Hindfoot Kinematics and Achilles Tendon Force During Level and Inclined Walking in Healthy Individuals.

    Science.gov (United States)

    Weinert-Aplin, Robert A; Bull, Anthony M J; McGregor, Alison H

    2016-04-01

    Conservative treatments such as in-shoe orthotic heel wedges to treat musculoskeletal injuries are not new. However, weak evidence supporting their use in the management of Achilles tendonitis suggests the mechanism by which these heel wedges works remains poorly understood. It was the aim of this study to test the underlying hypothesis that heel wedges can reduce Achilles tendon load. A musculoskeletal modeling approach was used to quantify changes in lower limb mechanics when walking due to the introduction of 12-mm orthotic heel wedges. Nineteen healthy volunteers walked on an inclinable walkway while optical motion, force plate, and plantar pressure data were recorded. Walking with heel wedges increased ankle dorsiflexion moments and reduced plantar flexion moments; this resulted in increased peak ankle dorsiflexor muscle forces during early stance and reduced tibialis posterior and toe flexor muscle forces during late stance. Heel wedges did not reduce overall Achilles tendon force during any walking condition, but did redistribute load from the medial to lateral triceps surae during inclined walking. These results add to the body of clinical evidence confirming that heel wedges do not reduce Achilles tendon load and our findings provide an explanation as to why this may be the case.

  16. Tidal Dissipation and Obliquity Evolution in Hot Jupiter Systems

    CERN Document Server

    Valsecchi, Francesca

    2014-01-01

    Two formation scenarios have been proposed to explain the tight orbits of hot Jupiters. These giant planets could be formed in low-obliquity orbits via disk migration or in high-obliquity orbits via high-eccentricity migration, where gravitational interactions with a companion are at play, together with tidal dissipation. Here we target the observed misaligned hot Jupiter systems to investigate whether their current properties are consistent with high-eccentricity migration. Specifically, we study whether tidal dissipation in the star can be responsible for the observed distribution of misalignments and orbital separations. Improving on previous studies, we use detailed models for the stellar component, thus accounting for how convection (and thus tidal dissipation) depends on the host star properties. We find that the currently observed degree of misalignment increases as the amount of surface convection in the host star decreases. This trend supports the hypothesis that tides are the mechanism shaping the o...

  17. Enhanced dynamic wedge output factors for Varian 2300CD and the case for a reference database.

    Science.gov (United States)

    Njeh, Christopher F

    2015-09-08

    Dose inhomogeneity in treatment planning can be compensated using physical wedges. Enhanced dynamic wedges (EDW) were introduced by Varian to overcome some of the shortcomings of physical wedges. The objectives of this study were to measure EDW output factors for 6 MV and 20 MV photon energies for a Varian 2300CD. Secondly, to review the literature in terms of published enhanced dynamic wedge output factors (EDWOF) for different Varian models and thereby add credence to the case of the validity of reference databases. The enhanced dynamic wedge output factors were measured for the Varian 2300CD for both 6MV and 20 MV photon energies. Twelve papers with published EDWOF for different Varian linac models were found in the literature. Comparing our results with the published mean, we found an excellent agreement for 6 MV EDWOF, with the percentage differences ranging from 0.01% to 0.57%, with a mean of 0.03%. The coefficient of variation of published EDWOF ranged from 0.17% to 0.85% and 0.1% to 0.9% for the for 6 MV and 18 MV photon energies, respectively. This paper provides the first published EDWOF for 20 MV photon energy. In addition, we have provided the first compendium of EDWOFs for different Varian linac models. The consistency of value across models and institution provide further support that a standard dataset of basic photon and electron dosimetry could be established as a guide for future commissioning, beam modeling, and quality assurance purposes.

  18. Numerical prediction of oblique detonation wave structures using detailed and reduced reaction mechanisms

    Science.gov (United States)

    Thaker, A. A.; Chelliah, H. K.

    1997-12-01

    Modelling of the structure and the limiting flow turning angles of an oblique detonation wave, established by a two-dimensional wedge, requires the implementation of detailed chemical kinetic models involving a large number of chemical species. In this paper, a method of reducing the computational effort involved in simulating such high-speed reacting flows by implementing a systematically reduced reaction mechanism is presented. For a hydrogen - air mixture, starting with an elementary mechanism having eight species in 12 reactions, three alternate four-step reduced reaction mechanisms are developed by introducing the steady-state approximation for the reaction intermediates HO2, O and OH, respectively. Additional reduction of the computational effort is achieved by introducing simplifications to the thermochemical data evaluations. The influence of the numerical grid used in predicting the induction process behind the shock is also investigated. Comparisons of the induction zone predicted by two-dimensional oblique detonation wave calculations with that of a static reactor model (with initial conditions of the gas mixture specified by those behind the nonreactive oblique shock wave) are also presented. The reasonably good agreement between the three four-step reduced mechanism predictions and the starting mechanism predictions indicates that further reduction to a two-step mechanism is feasible for the physical flow time scales (corresponding to inflow Mach numbers of 8 - 10) considered here, and needs to be pursued in the future.

  19. A fully integrated high-Q Whispering-Gallery Wedge Resonator

    CERN Document Server

    Ramiro-Manzano, F; Pavesi, L; Pucker, G; Ghulinyan, M

    2012-01-01

    Microresonator devices which posses ultra-high quality factors are essential for fundamental investigations and applications. Microsphere and microtoroid resonators support remarkably high Q's at optical frequencies, while planarity constrains preclude their integration into functional lightwave circuits. Conventional semiconductor processing can also be used to realize ultra-high-Q's with planar wedge-resonators. Still, their full integration with side-coupled dielectric waveguides remains an issue. Here we show the full monolithic integration of a wedge-resonator/waveguide vertically-coupled system on a silicon chip. In this approach the cavity and the waveguide lay in different planes. This permits to realize the shallow-angle wedge while the waveguide remains intact, allowing therefore to engineer a coupling of arbitrary strength between these two. The precise size-control and the robustness against post-processing operation due to its monolithic integration makes this system a prominent platform for indu...

  20. Short- and long-term deformation and the earthquake cycle in the southern Bolivia Subandes: Implications for orogenic wedge processes

    Science.gov (United States)

    Brooks, B. A.; Bevis, M. G.; Whipple, K. X.; Kendrick, E. C.; Smalley, R.; Arrowsmith, R.; Zapata, T.

    2009-12-01

    In the context of critical taper wedge mechanics, we analyze a new GPS-derived surface velocity field from the southern Subandean (SSA) range on the east flank of the central Andean Plateau. The SSA is one of the few active orogenic wedges located far enough from a plate boundary so that the geodetic signature of contractional processes may be isolated. We observe and model a strong strike-perpendicular surface velocity gradient as arising from the change in frictional behaviour of the SSA basal decollement from freely slipping to locked. The estimated width of the locked zone is ~130 km, a value that is significantly larger than in other similar wedges in Nepal or Taiwan and implies the SSA thrust front could host great (larger than M 8) intraplate thrust earthquakes. In support of this, topographic data (individual scarps and landslide scars) are consistent with the surface expression of the ~500 km long Mandeyepecua thrust fault resulting from large earthquake ruptures with long recurrence intervals. In comparison to other similar wedges (the northern Subandes, Nepal, and Taiwan) precipitation rates in the SSA are significantly lower and thus a wider orogenic wedge width is predicted by critical taper theory. We explore the hypothesis that the geodetically-determined width is equivalent to the orogenic wedge width by using earthquake scaling relations for individual faults and surface displacements predicted from decollement ruptures to model the velocity profile derived from published, sequentially restored balanced cross-sections in the region. Our work provides two new important insights on the interaction between climate and tectonics in orogenic wedges: 1) a drier climate favours increased size of potential thrust-front earthquakes by permitting the width of the active wedge to increase; 2) frictional variations on a decollement may be spatially persistent over geologic time-scales and so should be taken into account in surface process models of orogenic

  1. Proton Acceleration at Oblique Shocks

    Science.gov (United States)

    Galinsky, V. L.; Shevchenko, V. I.

    2011-06-01

    Acceleration at the shock waves propagating oblique to the magnetic field is studied using a recently developed theoretical/numerical model. The model assumes that resonant hydromagnetic wave-particle interaction is the most important physical mechanism relevant to motion and acceleration of particles as well as to excitation and damping of waves. The treatment of plasma and waves is self-consistent and time dependent. The model uses conservation laws and resonance conditions to find where waves will be generated or damped, and hence particles will be pitch-angle-scattered. The total distribution is included in the model and neither introduction of separate population of seed particles nor some ad hoc escape rate of accelerated particles is needed. Results of the study show agreement with diffusive shock acceleration models in the prediction of power spectra for accelerated particles in the upstream region. However, they also reveal the presence of spectral break in the high-energy part of the spectra. The role of the second-order Fermi-like acceleration at the initial stage of the acceleration is discussed. The test case used in the paper is based on ISEE-3 data collected for the shock of 1978 November 12.

  2. Ionospheric Oblique Incidence Soundings by Satellites

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The oblique incidence sweep-frequency ionospheric sounding technique uses the same principle of operation as the vertical incidence sounder. The primary difference...

  3. Oblique interactions of dust density waves

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhelchui [Los Alamos National Laboratory; Li, Yang - Fang [MAX-PLANCK INSTITUTE; Hou, Lujing [MAX-PLANCK INSTITUTE; Jiang, Ke [MAX-PLANCK INSTITUTE; Wu, De - Jin [CHINA; Thomas, Hubertus M [MAX-PLANCK INSTITUTE; Morfill, Gregor E [MAX-PLANCK INSTITUTE

    2010-01-01

    Self-excited dust density waves (DDWs) are studied in a striped electrode device. In addition to the usual perpendicularly (with respect to the electrode) propagating DDWs, which have been frequently observed in dusty plasma experiments on the ground, a low-frequency oblique mode is also observed. This low-frequency oblique DDW has a frequency much lower than the dust plasma frequency and its spontaneous excitation is observed even with a very low dust density. It is found that the low-frequency oblique mode can exist either separately or together with the usual perpendicular mode. In the latter case, a new mode arises as a result of the interactions between the perpendicular and the oblique modes. The experiments show that these three modes satisfy the wave coupling conditions in both the frequencies and the wave-vectors.

  4. Radiation pressure on a dielectric wedge

    CERN Document Server

    Mansuripur, Masud; Moloney, Jerome V

    2014-01-01

    The force of electromagnetic radiation on a dielectric medium may be derived by a direct application of the Lorentz law of classical electrodynamics. While the light's electric field acts upon the (induced) bound charges in the medium, its magnetic field exerts a force on the bound currents. We use the example of a wedge-shaped solid dielectric, immersed in a transparent liquid and illuminated at Brewster's angle, to demonstrate that the linear momentum of the electromagnetic field within dielectrics has neither the Minkowski nor the Abraham form; rather, the correct expression for momentum density has equal contributions from both. The time rate of change of the incident momentum thus expressed is equal to the force exerted on the wedge plus that experienced by the surrounding liquid.

  5. Graphene Plasmons in Triangular Wedges and Grooves

    CERN Document Server

    Gonçalves, P A D; Xiao, Sanshui; Vasilevskiy, M I; Mortensen, N Asger; Peres, N M R

    2016-01-01

    The ability to effectively guide electromagnetic radiation below the diffraction limit is of the utmost importance in the prospect of all-optical plasmonic circuitry. Here, we propose an alternative solution to conventional metal-based plasmonics by exploiting the deep subwavelength confinement and tunability of graphene plasmons guided along the apex of a graphene-covered dielectric wedge or groove. In particular, we present a quasi-analytic model to describe the plasmonic eigenmodes in such a system, including the complete determination of their spectrum and corresponding induced potential and electric field distributions. We have found that the dispersion of wedge/groove graphene plasmons follows the same functional dependence as their flat-graphene plasmons counterparts, but now scaled by a (purely) geometric factor in which all the information about the system's geometry is contained. We believe our results pave the way for the development of novel custom-tailored photonic devices for subwavelength waveg...

  6. Observations of Obliquely Propagating Electron Bernstein Waves

    DEFF Research Database (Denmark)

    Armstrong, R. J.; Juul Rasmussen, Jens; Stenzel, R. L.

    1981-01-01

    Plane electron Bernstein waves propagating obliquely to the magnetic field are investigated. The waves are excited by a plane grid antenna in a large volume magnetoplasma. The observations compare favorably with the predictions of the linear dispersion relation.......Plane electron Bernstein waves propagating obliquely to the magnetic field are investigated. The waves are excited by a plane grid antenna in a large volume magnetoplasma. The observations compare favorably with the predictions of the linear dispersion relation....

  7. Checking the virtual treatment modality Wedge from Siemens; Verificacion de la modalidad de tratamiento virtual WEDGE de SIEMENS

    Energy Technology Data Exchange (ETDEWEB)

    Suero Rodrigo, M. A.; Marques Fraguela, E.

    2011-07-01

    The treatment modality Virtual Wedge (VW) or implemented by Siemens virtual wedge in electron linear accelerators achieved dose distributions are similar but not identical, to those obtained with physical wedges. Among the advantages against the latter is the greater ease of use, wedge factor close to one, and lower peripheral dose. However, these benefits are to be effective requires a through quality control dependence because a larger number of parameters that control the generation of the beam, the dose monitor system and the movement of the jaws of the collimator. We performed a study of the wedge taking into account different configurations that can affect their behavior from the dosimetric point of view.

  8. Towards Efficiency of Oblique Images Orientation

    Science.gov (United States)

    Ostrowski, W.; Bakuła, K.

    2016-03-01

    Many papers on both theoretical aspects of bundle adjustment of oblique images and new operators for detecting tie points on oblique images have been written. However, only a few achievements presented in the literature were practically implemented in commercial software. In consequence often aerial triangulation is performed either for nadir images obtained simultaneously with oblique photos or bundle adjustment for separate images captured in different directions. The aim of this study was to investigate how the orientation of oblique images can be carried out effectively in commercial software based on the structure from motion technology. The main objective of the research was to evaluate the impact of the orientation strategy on both duration of the process and accuracy of photogrammetric 3D products. Two, very popular software: Pix4D and Agisoft Photoscan were tested and two approaches for image blocks were considered. The first approach based only on oblique images collected in four directions and the second approach included nadir images. In this study, blocks for three test areas were analysed. Oblique images were collected with medium-format cameras in maltan cross configuration with registration of GNSS and INS data. As a reference both check points and digital surface models from airborne laser scanning were used.

  9. TOWARDS EFFICIENCY OF OBLIQUE IMAGES ORIENTATION

    Directory of Open Access Journals (Sweden)

    W. Ostrowski

    2016-03-01

    Full Text Available Many papers on both theoretical aspects of bundle adjustment of oblique images and new operators for detecting tie points on oblique images have been written. However, only a few achievements presented in the literature were practically implemented in commercial software. In consequence often aerial triangulation is performed either for nadir images obtained simultaneously with oblique photos or bundle adjustment for separate images captured in different directions. The aim of this study was to investigate how the orientation of oblique images can be carried out effectively in commercial software based on the structure from motion technology. The main objective of the research was to evaluate the impact of the orientation strategy on both duration of the process and accuracy of photogrammetric 3D products. Two, very popular software: Pix4D and Agisoft Photoscan were tested and two approaches for image blocks were considered. The first approach based only on oblique images collected in four directions and the second approach included nadir images. In this study, blocks for three test areas were analysed. Oblique images were collected with medium-format cameras in maltan cross configuration with registration of GNSS and INS data. As a reference both check points and digital surface models from airborne laser scanning were used.

  10. Thermal transport in oblique finned microminichannels

    CERN Document Server

    Fan, Yan; Singh, Pawan Kumar; Lee, Yong Jiun

    2015-01-01

    The main aim of this book is to introduce and give an overview of a novel, easy, and highly effective heat transfer augmentation technique for single-phase micro/minichannel heat sink. The specific objectives of the volume are to: Introduce a novel planar oblique fin microchannel and cylindrical oblique fin minichannel heat sink design using passive heat transfer enhancement techniques  Investigate the thermal transport in both planar and cylindrical oblique fin structures through numerical simulation and systematic experimental studies. Evaluate the feasibility of employing the proposed solution in cooling non-uniform heat fluxes and hotspot suppression Conduct the similarity analysis and parametric study to obtain empirical correlations to evaluate the total heat transfer rate of the oblique fin heat sink Investigate the flow mechanism and optimize the dimensions of cylindrical oblique fin heat sink Investigate the influence of edge effect on flow and temperature uniformity in these oblique fin chan...

  11. Tidal obliquity evolution of potentially habitable planets

    CERN Document Server

    Heller, René; Barnes, Rory

    2011-01-01

    Stellar insolation has been used as the main constraint on a planet's habitability. However, as more Earth-like planets are discovered around low-mass stars (LMSs), a re-examination of the role of tides on the habitability of exoplanets has begun. Those studies have yet to consider the misalignment between a planet's rotational axis and the orbital plane normal, i.e. the planetary obliquity. We apply two equilibrium tide theories to compute the obliquity evolution of terrestrial planets orbiting in the habitable zones around LMSs. The time for the obliquity to decrease from an Earth-like obliquity of 23.5 deg to 5 deg, the 'tilt erosion time', is compared to the traditional insolation habitable zone (IHZ) as a function of semi-major axis, eccentricity, and stellar mass. We also compute tidal heating and equilibrium rotation caused by obliquity tides. The Super-Earth Gl581d and the planet candidate Gl581g are studied as examples for tidal processes. Earth-like obliquities of terrestrial planets in the IHZ arou...

  12. Superior oblique surgery: when and how?

    Directory of Open Access Journals (Sweden)

    Taylan Şekeroğlu H

    2013-08-01

    Full Text Available Hande Taylan Şekeroğlu,1 Ali Sefik Sanac,1 Umut Arslan,2 Emin Cumhur Sener11Department of Ophthalmology, 2Department of Biostatistics, Hacettepe University Faculty of Medicine, Ankara, TurkeyBackground: The purpose of this paper is to review different types of superior oblique muscle surgeries, to describe the main areas in clinical practice where superior oblique surgery is required or preferred, and to discuss the preferred types of superior oblique surgery with respect to their clinical outcomes.Methods: A consecutive nonrandomized retrospective series of patients who had undergone superior oblique muscle surgery as a single procedure were enrolled in the study. The diagnosis, clinical features, preoperative and postoperative vertical deviations in primary position, type of surgery, complications, and clinical outcomes were reviewed. The primary outcome measures were the type of strabismus and the type of superior oblique muscle surgery. The secondary outcome measure was the results of the surgeries.Results: The review identified 40 (20 male, 20 female patients with a median age of 6 (2–45 years. Nineteen patients (47.5% had Brown syndrome, eleven (27.5% had fourth nerve palsy, and ten (25.0% had horizontal deviations with A pattern. The most commonly performed surgery was superior oblique tenotomy in 29 (72.5% patients followed by superior oblique tuck in eleven (27.5% patients. The amount of vertical deviation in the fourth nerve palsy and Brown syndrome groups (P = 0.01 for both and the amount of A pattern in the A pattern group were significantly reduced postoperatively (P = 0.02.Conclusion: Surgery for the superior oblique muscle requires experience and appropriate preoperative evaluation in view of its challenging nature. The main indications are Brown syndrome, fourth nerve palsy, and A pattern deviations. Superior oblique surgery may be effective in terms of pattern collapse and correction of vertical deviations in primary

  13. Oblique convergence and slip partitioning in the NW Himalaya: Implications from GPS measurements

    Science.gov (United States)

    Kundu, Bhaskar; Yadav, Rajeev Kumar; Bali, Bikram Singh; Chowdhury, Sonalika; Gahalaut, V. K.

    2014-10-01

    We report GPS measurements of crustal deformation across the Kashmir Himalaya. We combined these results with the published results of GPS measurements from the Karakoram fault system and suggest that in the Kashmir Himalaya, the motion between the southern Tibet and India plate is oblique with respect to the structural trend. We estimated this almost north-south oblique motion to be 17 ± 2 mm/yr, which is partitioned between dextral motion of 5 ± 2 mm/yr on the Karakoram fault system and oblique motion of 13.6 ± 1 mm/yr with an azimuth of N198°E in the northwest-southeast trending Kashmir Himalayan frontal arc. Thus, the partitioning of the India-Southern Tibet oblique motion is partial in the Kashmir Himalayan frontal arc. However, in the neighboring Nepal Himalaya, there is no partitioning; the entire India-Southern Tibet motion of 19-20 mm/yr is arc normal and is accommodated entirely in the Himalayan frontal arc. The convergence rate in the Kashmir frontal Himalaya is about 25% less than that in the Nepal Himalayan region. However, here the Karakoram fault system accommodates about 20% of the southern Tibet and Indian plate convergence and marks the northern extent of the NW Himalayan arc sliver. The Kaurik Chango rift, a north-south oriented seismically active cross-wedge transtensional fault appears to divide the sliver in two parts causing varying translatory motion on the Karakoram fault on either side of the Kaurik Chango rift.

  14. Mantle flow in subduction systems: The mantle wedge flow field and implications for wedge processes

    Science.gov (United States)

    Long, Maureen D.; Wirth, Erin A.

    2013-02-01

    The mantle wedge above subducting slabs is associated with many important processes, including the transport of melt and volatiles. Our understanding of mantle wedge dynamics is incomplete, as the mantle flow field above subducting slabs remains poorly understood. Because seismic anisotropy is a consequence of deformation, measurements of shear wave splitting can constrain the geometry of mantle flow. In order to identify processes that make first-order contributions to the pattern of wedge flow, we have compiled a data set of local S splitting measurements from mantle wedges worldwide. There is a large amount of variability in splitting parameters, with average delay times ranging from ~0.1 to 0.3 s up to ~1.0-1.5 s and large variations in fast directions. We tested for relationships between splitting parameters and a variety of parameters related to subduction processes. We also explicitly tested the predictions made by 10 different models that have been proposed to explain splitting patterns in the mantle wedge. We find that no simple model can explain all of the trends observed in the global data set. Mantle wedge flow is likely controlled by a combination of downdip motion of the slab, trench migration, ambient mantle flow, small-scale convection, proximity to slab edges, and slab morphology, with the relative contributions of these in any given subduction system controlled by the subduction kinematics and mantle rheology. There is also a likely contribution from B-type olivine and/or serpentinite fabric in many subduction zones, governed by the local thermal structure and volatile distribution.

  15. Knee abduction angular impulses during prolonged running with wedged insoles.

    Science.gov (United States)

    Lewinson, Ryan T; Worobets, Jay T; Stefanyshyn, Darren J

    2013-07-01

    Wedged insoles may produce immediate effects on knee abduction angular impulses during running; however, it is currently not known whether these knee abduction angular impulse magnitudes are maintained throughout a run when fatigue sets in. If changes occur, this could affect the clinical utility of wedged insoles in treating conditions such as patellofemoral pain. Thus, the purpose of this study was to determine whether knee abduction angular impulses are altered during a prolonged run with wedged insoles. It was hypothesized that knee abduction angular impulses would be reduced following a prolonged run with wedged insoles. Nine healthy runners participated. Runners were randomly assigned to either a 6-mm medial wedge condition or a 6-mm lateral wedge condition and then ran continuously overground for 30 min. Knee abduction angular impulses were quantified at 0 and 30 min using a gait analysis procedure. After 2 days, participants returned to perform the same test but with the other wedge type. Two-way repeated-measures analysis of variance was used to evaluate main effects of wedge condition and time and interactions between wedge condition and time (α = 0.05). Paired t-tests were used for post hoc analysis (α = 0.01). No interaction effects (p = 0.958) were found, and knee abduction angular impulses were not significantly different over time (p = 0.384). Lateral wedge conditions produced lesser knee abduction angular impulses than medial conditions at 0 min (difference of 2.79 N m s, p = 0.006) and at 30 min (difference of 2.76 N m s, p < 0.001). It is concluded that significant knee abduction angular impulse changes within wedge conditions do not occur during a 30-min run. Additionally, knee abduction angular impulse differences between wedge conditions are maintained during a 30-min run.

  16. Plastic deformation of a wedge by a sliding punch

    Science.gov (United States)

    Nepershin, R. I.

    2016-11-01

    We present a self-similar solution of the problem of deformation of an ideally plastic wedge by a sliding punch with regard to contact friction; such a solution generalizes the well-known solutions of the problem of wedge penetration into a plastic half-space and of compression of an ideally plastic wedge by a plane punch. The problem is of interest for modeling the processes of plastic deformation of rough surfaces of metal pieces by a rigid tool.

  17. Optimal clinical implementation of the Siemens virtual wedge.

    Science.gov (United States)

    Walker, C P; Richmond, N D; Lambert, G D

    2003-01-01

    Installation of a modern high-energy Siemens Primus linear accelerator at the Northern Centre for Cancer Treatment (NCCT) provided the opportunity to investigate the optimal clinical implementation of the Siemens virtual wedge filter. Previously published work has concentrated on the production of virtual wedge angles at 15 degrees, 30 degrees, 45 degrees, and 60 degrees as replacements for the Siemens hard wedges of the same nominal angles. However, treatment plan optimization of the dose distribution can be achieved with the Primus, as its control software permits the selection of any virtual wedge angle from 15 degrees to 60 degrees in increments of 1 degrees. The same result can also be produced from a combination of open and 60 degrees wedged fields. Helax-TMS models both of these modes of virtual wedge delivery by the wedge angle and the wedge fraction methods respectively. This paper describes results of timing studies in the planning of optimized patient dose distributions by both methods and in the subsequent treatment delivery procedures. Employment of the wedge fraction method results in the delivery of small numbers of monitor units to the beam's central axis; therefore, wedge profile stability and delivered dose with low numbers of monitor units were also investigated. The wedge fraction was proven to be the most efficient method when the time taken for both planning and treatment delivery were taken into consideration, and is now used exclusively for virtual wedge treatment delivery in Newcastle. It has also been shown that there are no unfavorable dosimetric consequences from its practical implementation.

  18. Vibration frequencies of a constrained cantilever wedge

    Science.gov (United States)

    Craver, W. Lionel, Jr.; Lu, Yangshan

    1989-05-01

    This paper presents the solution for the natural frequencies of a beam tapered in one direction, or a wedge, with both a rotational and a translational constraint at a position along the length of the beam. The eigenfrequencies were determined using an incremental search and bisection method, accurate to the fourth decimal place. The taper ratio was varied from 1.4 to 5.0 and the dimensionless spring constants were varied from 0 to 1000. Graphs are provided to illustrate some results.

  19. Impingement of water droplets on wedges and double-wedge airfoils at supersonic speeds

    Science.gov (United States)

    Serafini, John S

    1954-01-01

    An analytical solution has been obtained for the equations of motion of water droplets impinging on a wedge in a two-dimensional supersonic flow field with a shock wave attached to the wedge. The closed-form solution yields analytical expressions for the equation of the droplet trajectory, the local rate of impingement and the impingement velocity at any point on the wedge surface, and the total rate of impingement. The analytical expressions are utilized to determine the impingement on the forward surfaces of diamond airfoils in supersonic flow fields with attached shock waves. The results presented include the following conditions: droplet diameters from 2 to 100 microns, pressure altitudes from sea level to 30,000 feet, free-stream static temperatures from 420 degrees r, free stream Mach numbers from 1.1 to 2.0, semiapex angles for the wedge from 1.14 degrees to 7.97 degrees, thickness-to-chord ratios for the diamond airfoil from 0.02 to 0.14, chord lengths from 1 to 20 feet, and angles of attack from zero to the inverse tangent of the airfoil thickness-to-chord ratio.

  20. Inferring Planetary Obliquity Using Rotational & Orbital Photometry

    CERN Document Server

    Schwartz, Joel C; Haggard, Hal M; Pallé, Eric; Cowan, Nicolas B

    2015-01-01

    The obliquity of a terrestrial planet is an important clue about its formation and critical to its climate. Previous studies using simulated photometry of Earth show that continuous observations over most of a planet's orbit can be inverted to infer obliquity. We extend this approach to single-epoch observations for planets with arbitrary albedo maps. For diffuse reflection, the flux seen by a distant observer is the product of the planet's albedo map, the host star's illumination, and the observer's visibility of different planet regions. It is useful to treat the product of illumination and visibility as the kernel of a convolution; this kernel is unimodal and symmetric. For planets with unknown obliquity, the kernel is not known a priori, but could be inferred by fitting a rotational light curve. We analyze this kernel under different viewing geometries, finding it well described by its longitudinal width and latitudinal position. We use Monte Carlo simulation to estimate uncertainties on these kernel char...

  1. Solar Obliquity Induced by Planet Nine

    CERN Document Server

    Bailey, Elizabeth; Brown, Michael E

    2016-01-01

    The six-degree obliquity of the sun suggests that either an asymmetry was present in the solar system's formation environment, or an external torque has misaligned the angular momentum vectors of the sun and the planets. However, the exact origin of this obliquity remains an open question. Batygin & Brown (2016) have recently shown that the physical alignment of distant Kuiper Belt orbits can be explained by a 5-20 Earth-mass planet on a distant, eccentric, and inclined orbit, with an approximate perihelion distance of ~250 AU. Using an analytic model for secular interactions between Planet Nine and the remaining giant planets, here we show that a planet with similar parameters can naturally generate the observed obliquity as well as the specific pole position of the sun's spin axis, from a nearly aligned initial state. Thus, Planet Nine offers a testable explanation for the otherwise mysterious spin-orbit misalignment of the solar system.

  2. Dynamical Instabilities in High-Obliquity Systems

    CERN Document Server

    Tamayo, Daniel; Hamilton, Douglas P; Nicholson, Philip D

    2012-01-01

    High-inclination circumplanetary orbits that are gravitationally perturbed by the central star can undergo Kozai oscillations---large-amplitude, coupled variations in the orbital eccentricity and inclination. We first study how this effect is modified by incorporating perturbations from the planetary oblateness. Tremaine et al. (2009) found that, for planets with obliquities > 68.875 degrees, orbits in the equilibrium local Laplace plane are unstable to eccentricity perturbations over a finite radial range, and execute large-amplitude chaotic oscillations in eccentricity and inclination. In the hope of making that treatment more easily understandable, we analyze the problem using orbital elements, confirming this threshold obliquity. Furthermore, we find that orbits inclined to the Laplace plane will be unstable over a broader radial range, and that such orbits can go unstable for obliquities less than 68.875 degrees. Finally, we analyze the added effects of radiation pressure, which are important for dust gr...

  3. Global Existence of a Shock for the Supersonic Flow Past a Curved Wedge

    Institute of Scientific and Technical Information of China (English)

    Hui Cheng YIN

    2006-01-01

    This note is devoted to the study of the global existence of a shock wave for the supersonic flow past a curved wedge. When the curved wedge is a small perturbation of a straight wedge and the angle of the wedge is less than some critical value, we show that a shock attached at the wedge will exist globally.

  4. Effective operator contributions to the oblique parameters

    CERN Document Server

    Sánchez-Colón, G

    1998-01-01

    We present a model and process independent study of the contributions from non-Standard Model physics to the oblique parameters S, T and U. We show that within an effective lagrangian parameterization the expressions for the oblique parameters in terms of observables are consistent, while those in terms of the vector-boson vacuum polarization tensors are ambiguous. We obtain the constraints on the scale of new physics derived from current data on S, T and U and note that deviations in U from its Standard Model value would favor a scenario where the underlying physics does not decouple.

  5. Molecular depth profiling by wedged crater beveling.

    Science.gov (United States)

    Mao, Dan; Lu, Caiyan; Winograd, Nicholas; Wucher, Andreas

    2011-08-15

    Time-of-flight secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by a 40-keV C(60)(+) cluster ion beam on an organic film of Irganox 1010 doped with Irganox 3114 delta layers. From an examination of the resulting surface, the information about depth resolution, topography, and erosion rate can be obtained as a function of crater depth for every depth in a single experiment. It is shown that when measurements are performed at liquid nitrogen temperature, a constant erosion rate and reduced bombardment induced surface roughness is observed. At room temperature, however, the erosion rate drops by ∼(1)/(3) during the removal of the 400 nm Irganox film and the roughness gradually increased to from 1 nm to ∼4 nm. From SIMS lateral images of the beveled crater and AFM topography results, depth resolution was further improved by employing glancing angles of incidence and lower primary ion beam energy. Sub-10 nm depth resolution was observed under the optimized conditions on a routine basis. In general, we show that the wedge-crater beveling is an important tool for elucidating the factors that are important for molecular depth profiling experiments.

  6. The evolution of forearc structures along an oblique convergent margin, central Aleutian Arc

    Science.gov (United States)

    Ryan, H.F.; Scholl, D. W.

    1989-01-01

    Multichannel seismic reflection data were used to determine the evolutionary history of the forearc region of the central Aleutian Ridge. Since at least late Miocene time this sector of the ridge has been obliquely underthrust 30?? west of orthogonal convergence by the northwestward converging Pacific plate at a rate of 80-90 km/m.y. Our data indicate that prior to late Eocene time the forearc region was composed of rocks of the arc massif thinly mantled by slope deposits. Beginning in latest Miocene or earliest Pliocene time, a zone of outer-arc structural highs and a forearc basin began to form. Initial structures of the zone of outer-arc highs formed as the thickening wedge underran, compressively deformed, and uplifted the seaward edge of the arc massive above a landward dipping backstop thrust. Forearc basin strata ponded arcward of the elevating zone of outer-arc highs. However, most younger structures of the zone of outer-arc highs cannot be ascribed simply to the orthogonal effects of an underrunning wedge. Oblique convergence created a major right-lateral shear zone (the Hawley Ridge shear zone) that longitudinally disrupted the zone of outer-arc highs, truncating the seaward flank of the forearc basin and shearing the southern limb of Hawley Ridge, an exceptionally large antiformal outer-arc high structure. Uplift of Hawley Ridge may be related to the thickening of the arc massif by westward directed basement duplexes. Great structural complexity, including the close juxtaposition of coeval structures recording compression, extension, differential vertical movements, and strike-slip displacement, should be expected, even within areas of generally kindred tectonostratigraphic terranes. -from Authors

  7. Oblique Du-Fort Frankel Beam Propagation Method

    Directory of Open Access Journals (Sweden)

    Ken Chan

    2011-01-01

    Full Text Available The oblique BPM based on the Du-Fort Frankel method is presented. The paper demonstrates the accuracy and the computational improvements of the scheme compared to the oblique BPM based on Crank-Nicholson (CN scheme.

  8. Orientation Strategies for Aerial Oblique Images

    Science.gov (United States)

    Wiedemann, A.; Moré, J.

    2012-07-01

    Oblique aerial images become more and more distributed to fill the gap between vertical aerial images and mobile mapping systems. Different systems are on the market. For some applications, like texture mapping, precise orientation data are required. One point is the stable interior orientation, which can be achieved by stable camera systems, the other a precise exterior orientation. A sufficient exterior orientation can be achieved by a large effort in direct sensor orientation, whereas minor errors in the angles have a larger effect than in vertical imagery. The more appropriate approach is by determine the precise orientation parameters by photogrammetric methods using an adapted aerial triangulation. Due to the different points of view towards the object the traditional aerotriangulation matching tools fail, as they produce a bunch of blunders and require a lot of manual work to achieve a sufficient solution. In this paper some approaches are discussed and results are presented for the most promising approaches. We describe a single step approach with an aerotriangulation using all available images; a two step approach with an aerotriangulation only of the vertical images plus a mathematical transformation of the oblique images using the oblique cameras excentricity; and finally the extended functional model for a bundle block adjustment considering the mechanical connection between vertical and oblique images. Beside accuracy also other aspects like efficiency and required manual work have to be considered.

  9. Flow and sediment transport across oblique channels

    DEFF Research Database (Denmark)

    Hjelmager Jensen, Jacob; Madsen, Erik Østergaard; Fredsøe, Jørgen

    1998-01-01

    A 3D numerical investigation of flow across channels aligned obliquely to the main flow direction has been conducted. The applied numerical model solves the Reynolds-averaged Navier-Stokes equations using the k-ε model for turbulence closure on a curvilinear grid. Three momentum equations are sol...

  10. Oblique patterned etching of vertical silicon sidewalls

    Science.gov (United States)

    Bruce Burckel, D.; Finnegan, Patrick S.; David Henry, M.; Resnick, Paul J.; Jarecki, Robert L.

    2016-04-01

    A method for patterning on vertical silicon surfaces in high aspect ratio silicon topography is presented. A Faraday cage is used to direct energetic reactive ions obliquely through a patterned suspended membrane positioned over the topography. The technique is capable of forming high-fidelity pattern (100 nm) features, adding an additional fabrication capability to standard top-down fabrication approaches.

  11. Obliquity Modulation of the Incoming Solar Radiation

    Science.gov (United States)

    Liu, Han-Shou; Smith, David E. (Technical Monitor)

    2001-01-01

    Based on a basic principle of orbital resonance, we have identified a huge deficit of solar radiation induced by the combined amplitude and frequency modulation of the Earth's obliquity as possibly the causal mechanism for ice age glaciation. Including this modulation effect on solar radiation, we have performed model simulations of climate change for the past 2 million years. Simulation results show that: (1) For the past 1 million years, temperature fluctuation cycles were dominated by a 100-Kyr period due to amplitude-frequency resonance effect of the obliquity; (2) From 2 to 1 million years ago, the amplitude-frequency interactions. of the obliquity were so weak that they were not able to stimulate a resonance effect on solar radiation; (3) Amplitude and frequency modulation analysis on solar radiation provides a series of resonance in the incoming solar radiation which may shift the glaciation cycles from 41-Kyr to 100-Kyr about 0.9 million years ago. These results are in good agreement with the marine and continental paleoclimate records. Thus, the proposed climate response to the combined amplitude and frequency modulation of the Earth's obliquity may be the key to understanding the glaciation puzzles in paleoclimatology.

  12. 49 CFR 215.113 - Defective plain bearing wedge.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.113 Defective plain bearing wedge. A railroad may not place or continue in service a car, if a plain bearing wedge on that car is— (a) Missing; (b) Cracked; (c) Broken; or (d) Not...

  13. Comparison of wedge resection (Winograd procedure) and wedge resection plus complete nail plate avulsion in the treatment of ingrown toenails.

    Science.gov (United States)

    Huang, Jia-Zhang; Zhang, Yi-Jun; Ma, Xin; Wang, Xu; Zhang, Chao; Chen, Li

    2015-01-01

    The present retrospective study compared the efficacy of wedge resection (Winograd procedure) and wedge resection plus complete nail plate avulsion for the treatment of ingrown toenails (onychocryptosis). Two surgical methods were performed in 95 patients with a stage 2 or 3 ingrown toenail. Each patient was examined weekly until healing and then at 1, 6, and 12 months of follow-up. The outcomes measured were surgical duration, healing time, recurrence rate, the incidence of postoperative infection, and cosmetic appearance after surgery. Of the 95 patients (115 ingrown toenails) included in the present study, 39 (41.1%) underwent wedge resection (Winograd procedure) and 56 (59%), wedge resection plus complete nail plate avulsion. The mean surgical duration for wedge resection (Winograd procedure) and wedge resection plus complete nail plate avulsion was 14.9 ± 2.4 minutes and 15.1 ± 3.2 minutes, respectively (p = .73). The corresponding healing times were 2.8 ± 1.2 weeks and 2.7 ± 1.3 weeks (p = .70). Recurrence developed in 3 (3.2%) patients after wedge resection (Winograd procedure) and in 4 (4.2%) after wedge resection plus complete nail plate avulsion. In addition, postoperative infection occurred in 3 (3.2%) patients after wedge resection (Winograd procedure) and 2 (2.1%) after wedge resection plus complete nail plate avulsion. Both of the surgical procedures were practical and appropriate for the treatment of ingrown toenails, being simple and associated with low morbidity and a high success rate. However, cosmetically, wedge resection (Winograd procedure) would be the better choice because the nail plate remains intact.

  14. Insolation patterns on synchronous exoplanets with obliquity

    Science.gov (United States)

    Dobrovolskis, Anthony R.

    2009-11-01

    A previous paper [Dobrovolskis, A.R., 2007. Icarus 192, 1-23] showed that eccentricity can have profound effects on the climate, habitability, and detectability of extrasolar planets. This complementary study shows that obliquity can have comparable effects. The known exoplanets exhibit a wide range of orbital eccentricities, but those within several million kilometers of their suns are generally in near-circular orbits. This fact is widely attributed to the dissipation of tides in the planets. Tides in a planet affect its spin even more than its orbit, and such tidally evolved planets often are assumed to be in synchronous rotation, so that their rotation periods are identical to their orbital periods. The canonical example of synchronous spin is the way that our Moon always keeps nearly the same hemisphere facing the Earth. Tides also tend to reduce the planet's obliquity (the angle between its spin and orbital angular velocities). However, orbit precession can cause the rotation to become locked in a "Cassini state", where it retains a nearly constant non-zero obliquity. For example, our Moon maintains an obliquity of about 6.7° with respect to its orbit about the Earth. In comparison, stable Cassini states can exist for practically any obliquity up to ˜90° or more for planets of binary stars, or in multi-planet systems with high mutual inclinations, such as are produced by scattering or by the Kozai mechanism. This work considers planets in synchronous rotation with circular orbits, but arbitrary obliquity β; this affects the distribution of insolation over the planet's surface, particularly near its poles. For β=0, one hemisphere bakes in perpetual sunshine, while the opposite hemisphere experiences eternal darkness. As β increases, the region of permanent daylight and the antipodal realm of endless night both shrink, while a more temperate area of alternating day and night spreads in longitude, and especially in latitude. The regions of permanent day or

  15. Ground penetrating radar estimates of permafrost ice wedge depth

    Science.gov (United States)

    Parsekian, A.; Slater, L. D.; Nolan, J. T.; Grosse, G.; Walter Anthony, K. M.

    2013-12-01

    Vertical ground ice wedges associated with polygonal patterning in permafrost environments form due to frost cracking of soils under harsh winter conditions and subsequent infilling of cracks with snow melt water. Ice wedge polygon patterns have implications for lowland geomorphology, hydrology, and vulnerability of permafrost to thaw. Ice wedge dimensions may exceed two meters width at the surface and several meters depth, however few studies have addressed the question of ice wedge depth due to challenges related to measuring the vertical dimension below the ground. Vertical exposures where ice wedges maybe observed are limited to rapidly retreating lake, river, and coastal bluffs. Coring though the ice wedges to determine vertical extent is possible, however that approach is time consuming and labor intensive. Many geophysical investigations have noted signal anomalies related to the presence of ice wedges, but no reliable method for extracting wedge dimensions from geophysical data has been yet proposed. Here we present new evidence that ground penetrating radar (GPR) may be a viable method for estimating ice wedge depth. We present three new perspectives on processing GPR data collected over ice wedges that show considerable promise for use as a fast, cost effective method for evaluating ice wedge depth. Our novel approaches include 1) a simple frequency-domain analysis, 2) an S-transform frequency domain analysis and 3) an analysis of the returned signal power as a radar cross section (RCS) treating subsurface ice wedges as dihedral corner retro-reflectors. Our methods are demonstrated and validated using finite-difference time domain FDTD) GPR forward models of synthetic idealized ice wedges and field data from permafrost sites in Alaska. Our results indicate that frequency domain and signal power data provide information that is easier to extract from raw GPR data than similar information in the time domain. We also show that we can simplify the problem by

  16. Oblique effect in visual mismatch negativity

    Directory of Open Access Journals (Sweden)

    Endre eTakács

    2013-09-01

    Full Text Available We investigated whether visual orientation anisotropies (known as oblique effect exist in non-attended visual changes using event-related potentials (ERP. We recorded visual mismatch negativity (vMMN which signals violation of sequential regularities. In the visual periphery unattended, task-irrelevant Gábor patches were displayed in an oddball sequence while subjects performed a tracking task in the central field. A moderate change (50° in the orientation of stimuli revealed no consistent change-related components. However we found orientation-related differences around 170 ms in occipito-temporal areas in the amplitude of the ERPs evoked by standard stimuli. In a supplementary experiment we determined the amount of orientation difference that is needed for change detection in an active, attended paradigm. Results exhibited the classical oblique effect; subjects detected 10° deviations from cardinal directions, while threshold from oblique directions was 17°. These results provide evidence that perception of change could be accomplished at significantly smaller thresholds, than what elicits vMMN. In Experiment2 we increased the orientation change to 90°. Deviant-minus-standard difference was negative in occipito-parietal areas, between 120-200 ms after stimulus onset. VMMNs to changes from cardinal angles were larger and more sustained than vMMNs evoked by changes from oblique angles. Changes from cardinal orientations represent a more detectable signal for the automatic change detection system than changes from oblique angles, thus increased vMMN to these larger deviances might be considered a variant of the magnitude of deviance effect rarely observed in vMMN studies.

  17. Characterization of CNRS Fizeau wedge laser tuner

    Science.gov (United States)

    A fringe detection and measurement system was constructed for use with the CNRS Fizeau wedge laser tuner, consisting of three circuit boards. The first board is a standard Reticon RC-100 B motherboard which is used to provide the timing, video processing, and housekeeping functions required by the Reticon RL-512 G photodiode array used in the system. The sampled and held video signal from the motherboard is processed by a second, custom fabricated circuit board which contains a high speed fringe detection and locating circuit. This board includes a dc level discriminator type fringe detector, a counter circuit to determine fringe center, a pulsed laser triggering circuit, and a control circuit to operate the shutter for the He-Ne reference laser beam. The fringe center information is supplied to the third board, a commercial single board computer, which governs the data collection process and interprets the results.

  18. Phased array ultrasonic inspection method for homogeneous tube inspection over a wide oblique angle range

    Science.gov (United States)

    Lepage, Benoit; Painchaud-April, Guillaume

    2017-02-01

    As seamless tube manufacturers push quality requirements for their products, automated phased array Rotating Tube Inspection Systems (RTIS) are now required to provide continuous NDE detection performances over a wide angular range of oblique flaws. One major impact of this new reality is a paradigm shift for the calibration method use. This change is driven by the requirement to meet homogeneous detection over broad oblique flaw angle intervals, whereas standard practice only requires calibration at specific discrete angles. This paper presents an innovative method specifically designed to obtain high productivity and homogeneous inspection measurements over an oblique flaw range extending from -45 to 45 degrees. Experimental results from the application of the method on various tubes presenting multiple artificial flaws support the quantitative performance evaluation.

  19. Superimposed folding and thrusting by two phases of mutually orthogonal or oblique shortening in analogue models

    Science.gov (United States)

    Deng, Hongling; Koyi, Hemin A.; Nilfouroushan, Faramarz

    2016-02-01

    Orogens may suffer more than one phase shortening resulting in superposition of structures of different generations. Superimposition of orthogonal or oblique shortening is studied using sandbox and centrifuge modelling. Results of sand models show that in orthogonal superimposition, the two resulting structural trends are approximately orthogonal to each other. In oblique superimposition, structures trend obliquely to each other in the relatively thin areas of the model (foreland), and mutually orthogonal in areas where the model is thickened during the first phase of shortening (i.e. the hinterland). Thrusts formed during the first shortening phase may be reactivated during the later shortening phase. Spacing of the later phase structures is not as wide as expected, considering they across the pre-existing thickened wedge. Superposition of structures results in formation of type 1 fold interference pattern. Bedding is curved outwards both in the dome and basin structures. Folded layers are dipping and plunging outwards in a dome, while they are dipping and plunging inwards in a basin. In the areas between two adjacent domes or basins (i.e. where an anticline is superimposed by a syncline or a syncline is superimposed by an anticline), bedding is curved inwards, and the anticlines plunge inwards and the synclines outwards. The latter feature could be helpful to determine the age relationship for type 2 fold interference pattern. In tectonic regions where multiple phases of shortening have occurred, the orogenic-scale dome-and-basin and arrowhead-shaped interference patterns are commonly formed, as in the models. However, in some areas, the fold interference pattern might be modified by a later phase of thrusting. Similar to models results, superimposition of two and/or even more deformation phases may not be recorded by structures all over the tectonic area.

  20. Stable isotope and gas properties of two climatically contrasting (Pleistocene and Holocene ice wedges from Cape Mamontov Klyk, Laptev Sea, northern Siberia

    Directory of Open Access Journals (Sweden)

    T. Boereboom

    2013-01-01

    Full Text Available This paper presents and discusses the texture, fabric, water stable isotopes (δ18O, δD and gas properties (total gas content, O2, N2, Ar, CO2, and CH4 mixing ratios of two climatically contrasted (Holocene vs. Pleistocene ice wedges (IW-26 and IW-28 from Cape Mamontov Klyk, Laptev Sea, in northern Siberia. The two ice wedges display contrasting structures: one being of relatively "clean" ice and the other showing clean ice at its centre as well as debris-rich ice on both sides (referred to as "ice-sand wedge". Our multiparametric approach allows discrimination between three different ice facies with specific signatures, suggesting different climatic and environmental conditions of formation and various intensities and nature of biological activity. More specifically, crystallography, total gas content and gas composition reveal variable levels of meltwater infiltration and contrasting contributions from anaerobic and aerobic conditions to the biological signatures. Stable isotope data are drawn on to discuss changes in paleoenvironmental conditions and in the temporal variation of the different moisture sources for the snow feeding into the ice wedges infillings. Our data set also supports the previous assumption that the ice wedge IW-28 was formed in Pleistocene and the ice wedge IW-26 in Holocene times. This study sheds more light on the conditions of ice wedge growth under changing environmental conditions.

  1. The Tax Wedge in Slovenia: International Comparison and Policy Recommendations

    Directory of Open Access Journals (Sweden)

    Primož Dolenc

    2005-09-01

    Full Text Available When taxes on labor are introduced, a “tax wedge” appears between the labor costs paid by the employer (gross wage and the net wage received by an employee. At a certain level of wage, a higher tax wedge increases unemployment and decreases employment, all other things being equal. The paper tackles three main questions: the characteristics of the tax wedge, unemployment and employment rates in OECD countries in the recent past, tax wedge policy in the EU15 and the new EU members and the tax system and its effects on the unemployment and employment rates in Slovenia. We found that the OECD countries can be classified into two groups of countries if the tax wedge, the unemployment rate and the employment rate are taken into consideration. The first group is the high tax wedge, high unemployment rate and low employment rate group of countries, whereas the other group has the opposite characteristics. European member states (old and new have on average a higher tax burden on labor than the OECD average, consequently suffering from higher unemployment rates. Slovenia has an unreasonably high tax wedge; in the EU only Belgium and Germany have a higher tax burden. According to previous and our empirical findings we suggest that Slovenia could benefit from a reduction in the tax wedge.

  2. Inferior oblique weakening surgery on ocular torsion in congenital superior oblique palsy

    Directory of Open Access Journals (Sweden)

    Jinho Lee

    2015-06-01

    Full Text Available AIM:To investigate changes in fundus excyclotorsion after inferior oblique myectomy or myotomy.METHODS:The records of 21 patients undergoing strabismus surgery by a single surgeon between 2009 and 2012 were examined. Only patients who had undergone an inferior oblique myectomy or myotomy, with or without horizontal rectus muscle surgery, were evaluated. Digital fundus photographs were obtained, and the angle formed by a horizontal line passing through the optic disc center and a reference line connecting the foveola and optic disc center was measured. Associated clinical factors examined include age at the time of surgery, presence or absence of a head tilt, degree of preoperative vertical deviation, torsional angle, inferior oblique muscle overaction/superior oblique muscle underaction, and surgery laterality. Whether the procedure was performed alone or in combination with a horizontal rectus muscle surgery was also examined.RESULTS:Mean preoperative torsional angle was 12.0±6.4°, which decreased to 6.9±5.7° after surgery (P<0.001, paired t-test. Torsional angle also decreased from 15.1±7.0° to 6.2±4.3° in the myectomy group (P<0.001, paired t-test but there were no significant changes in the myotomy group (P=0.093, Wilcoxon signed rank test. Multivariable linear regression analysis showed that preoperative torsional angle, degree of inferior oblique overaction, and age at surgery independently and significantly affected postoperative torsional angle.CONCLUSION:Mean torsional angle decreased after inferior oblique myectomy. Degree of preoperative torsional angle, inferior oblique overaction, and age at surgery influence postoperative torsional angle.

  3. Group sequential designs for stepped-wedge cluster randomised trials.

    Science.gov (United States)

    Grayling, Michael J; Wason, James Ms; Mander, Adrian P

    2017-06-01

    The stepped-wedge cluster randomised trial design has received substantial attention in recent years. Although various extensions to the original design have been proposed, no guidance is available on the design of stepped-wedge cluster randomised trials with interim analyses. In an individually randomised trial setting, group sequential methods can provide notable efficiency gains and ethical benefits. We address this by discussing how established group sequential methodology can be adapted for stepped-wedge designs. Utilising the error spending approach to group sequential trial design, we detail the assumptions required for the determination of stepped-wedge cluster randomised trials with interim analyses. We consider early stopping for efficacy, futility, or efficacy and futility. We describe first how this can be done for any specified linear mixed model for data analysis. We then focus on one particular commonly utilised model and, using a recently completed stepped-wedge cluster randomised trial, compare the performance of several designs with interim analyses to the classical stepped-wedge design. Finally, the performance of a quantile substitution procedure for dealing with the case of unknown variance is explored. We demonstrate that the incorporation of early stopping in stepped-wedge cluster randomised trial designs could reduce the expected sample size under the null and alternative hypotheses by up to 31% and 22%, respectively, with no cost to the trial's type-I and type-II error rates. The use of restricted error maximum likelihood estimation was found to be more important than quantile substitution for controlling the type-I error rate. The addition of interim analyses into stepped-wedge cluster randomised trials could help guard against time-consuming trials conducted on poor performing treatments and also help expedite the implementation of efficacious treatments. In future, trialists should consider incorporating early stopping of some kind into

  4. Stable and Critical Noncohesive Coulomb Wedges: Exact Elastic Solutions

    Science.gov (United States)

    Wang, K.; Hu, Y.

    2004-12-01

    The theory of critically tapered Coulomb wedge has been successfully applied to model active fold-and-thrust belts or submarine accretionary prisms. Brittle mountain building is episodic in nature, controlled by changes in basal friction, erosion and sedimentation, and hydrogeology. Sediment accretion may be modulated by great subduction earthquakes. Between deformation episodes and/or during transition between compressional and extensional tectonics, the Coulomb wedges are stable (i.e., supercritical), to which the critical taper theory does not apply. In this work, we provide an exact elastic solution for stable wedges based on Airy stress functions. The stress equilibrium equation and definition of basal friction and basal and internal pore fluid pressure ratios are exactly the same as those used for Dahlen's [1984] exact solution for critical noncohesive Coulomb wedges, but internal friction μ becomes irrelevant. Given elastic - perfectly Coulomb-plastic rheology, for stresses in a wedge on the verge of Coulomb failure there must co-exist a critical taper solution involving μ and a unique equivalent elastic solution not involving μ . Our elastic solution precisely reduces to Dahlen's critical taper solution for critical conditions. For stable conditions, normal stress perpendicular to the surface slope σ z and shear stress τ xz are identical with those in a critical taper, but the slope-parallel normal stress is different. The elastic solution is also generally applicable to purely elastic wedges and useful for modeling geodetic observations. A stable noncohesive Coulomb wedge differs from a general elastic wedge in that its upper and lower surfaces stay at zero curvature during loading. Dahlen, F.A. (1984), Noncohesive critical Coulomb wedges: An exact solution, JGR, 89, 10,125-10,133.

  5. Proton beam generation of oblique whistler waves

    Science.gov (United States)

    Wong, H. K.; Goldstein, M. L.

    1988-01-01

    It is known that ion beams are capable of generating whistler waves that propagate parallel to the mean magnetic field. Such waves may have been observed both upstream of the earth's bow shock and in the vicinity of comets. Previous analyses are extended to include propagation oblique to the mean magnetic field. The instability is generated by the perpendicular component of free energy in the ions, which can arise either via a temperature anisotropy or via a gyrating distribution. In the former case, the generation of whistler waves is confined to a fairly narrow cone of propagation directions centered about parallel propagation; in the latter case, the maximum growth of the instability can occur at fairly large obliquities (theta equal to about 50 deg).

  6. Obliquely propagating dust-density waves

    Science.gov (United States)

    Piel, A.; Arp, O.; Klindworth, M.; Melzer, A.

    2008-02-01

    Self-excited dust-density waves are experimentally studied in a dusty plasma under microgravity. Two types of waves are observed: a mode inside the dust volume propagating in the direction of the ion flow and another mode propagating obliquely at the boundary between the dusty plasma and the space charge sheath. The dominance of oblique modes can be described in the frame of a fluid model. It is shown that the results fom the fluid model agree remarkably well with a kinetic electrostatic model of Rosenberg [J. Vac. Sci. Technol. A 14, 631 (1996)]. In the experiment, the instability is quenched by increasing the gas pressure or decreasing the dust density. The critical pressure and dust density are well described by the models.

  7. Coupled stratigraphic and structural evolution of a glaciated orogenic wedge, offshore St. Elias orogen, Alaska

    Science.gov (United States)

    Worthington, Lindsay L.; Gulick, Sean P. S.; Pavlis, Terry L.

    2010-12-01

    The St. Elias orogen is the result of ˜10 Myr of oblique convergence and flat-slab subduction in the Gulf of Alaska between North America and the Yakutat microplate. Extensive glaciation and a complex tectonic environment make this region a unique case study in which to examine the details of terrane accretion and the possible coupled influence of climate and tectonic drivers on the structural and topographic evolution of an orogenic wedge. Reflection seismic profiles across the offshore Pamplona zone fold-thrust belt, the frontal St. Elias orogenic wedge, provide constraints for quantifying Pleistocene deformation recorded in the glaciomarine Yakataga formation. The total amount of Pleistocene shortening observed varies from ˜3 to 5 mm/yr, compared to the current GPS-derived Yakutat-North America convergence rate across the St. Elias orogen of ˜45 mm/yr. Growth strata and kinematic fold analysis allow comparison of relative timing of fault activity, which reveals temporal and spatial shifting of active deformation during the glacial period: faulting localized adjacent to the coastline and at the current submarine deformation front. The abandoned, currently inactive region is colocated with the major glacial depocenter in the region, the Bering Trough. These observations imply that glacial processes such as sediment loading and focused erosion during advance-retreat cycles has a direct effect on the evolution of individual faults within the Pamplona zone and the overall deformation pattern in the offshore St. Elias margin. This information provides key constraints for understanding how climatic shifts may have affected the evolution of margin architecture during Pleistocene glacial-interglacial periods.

  8. Employment and productivity: The role of the tax wedge

    Directory of Open Access Journals (Sweden)

    Andrea FESTA

    2015-11-01

    Full Text Available After the economic crisis, many countries aim at reducing unemployment and foster productivity. To address these issues one of the most common policy indications recommends lowering the tax wedge on labour in order to increase employment and growth. As a consequence, a review of the empirical studies focused on the relation between tax wedge, employment and productivity is an useful and demanding exercise, especially in those European countries where the topic is on the front page of the domestic policy debate because the productivity growth is low and the tax wedge on labour is high.

  9. Resolution of superior oblique myokymia with memantine.

    Science.gov (United States)

    Jain, Saurabh; Farooq, Shegufta J; Gottlob, Irene

    2008-02-01

    We describe a novel treatment of superior oblique myokymia. A 40-year-old woman was treated with gabapentin for this disorder with partial success and reported significant side effects including loss of libido and weight gain. After a drug holiday, memantine therapy was initiated resulting in a substantial improvement in her symptoms with far fewer side effects and stability on long-term maintenance therapy.

  10. Low stellar obliquities in compact multiplanet systems

    CERN Document Server

    Albrecht, Simon; Marcy, Geoffrey W; Howard, Andrew W; Isaacson, Howard; Johnson, John A

    2013-01-01

    We measure the sky-projected stellar obliquities (\\lambda) in the multiple-transiting planetary systems KOI-94 and Kepler-25, using the Rossiter-McLaughlin effect. In both cases the host stars are well-aligned with the orbital planes of the planets. For KOI-94 we find \\lambda=-11+-11 deg, confirming a recent result by Hirano and coworkers. Kepler-25 was a more challenging case because the transit depth is unusually small (0.13 %). To obtain the obliquity it was necessary to use prior knowledge of the star's projected rotation rate, and apply two different analysis methods to independent wavelength regions of the spectra. The two methods gave consistent results, \\lambda=7+-8 deg and -0.5+-5.7 deg. There are now a total of five obliquity measurements for host stars of systems of multiple transiting planets, all of which are consistent with spin-orbit alignment. This alignment is unlikely to be the result of tidal interactions, because of the relatively large orbital distances and low planetary masses in the sys...

  11. On the oscillations in Mercury's obliquity

    CERN Document Server

    Bois, E

    2007-01-01

    One major objective of MESSENGER and BepiColombo spatial missions is to accurately measure Mercury's rotation and its obliquity in order to obtain constraints on internal structure of the planet. Which is the obliquity's dynamical behavior deriving from a complete spin-orbit motion of Mercury simultaneously integrated with planetary interactions? We have used our SONYR model integrating the spin-orbit N-body problem applied to the solar System (Sun and planets). For lack of current accurate observations or ephemerides of Mercury's rotation, and therefore for lack of valid initial conditions for a numerical integration, we have built an original method for finding the libration center of the spin-orbit system and, as a consequence, for avoiding arbitrary amplitudes in librations of the spin-orbit motion as well as in Mercury's obliquity. The method has been carried out in two cases: (1) the spin-orbit motion of Mercury in the 2-body problem case (Sun-Mercury) where an uniform precession of the Keplerian orbita...

  12. Flow braking and the substorm current wedge

    Science.gov (United States)

    Birn, J.; Hesse, M.; Haerendel, G.; Baumjohann, W.; Shiokawa, K.

    1999-09-01

    Recent models of magnetotail activity have associated the braking of earthward flow with dipolarization and the reduction and diversion of cross-tail current, that is, the signatures of the substorm current wedge. Estimates of the magnitude of the diverted current by Haerendel [1992] and Shiokawa et al. [1997, 1998] tend to be lower than results from computer simulations of magnetotail reconnection and tail collapse [Birn and Hesse, 1996], despite similar underlying models. An analysis of the differences between these estimates on the basis of the simulations gives a more refined picture of the diversion of perpendicular into parallel currents. The inertial currents considered by Haerendel [1992] and Shiokawa et al. [1997] contribute to the initial current reduction and diversion, but the dominant and more permanent contribution stems from the pressure gradient terms, which change in connection with the field collapse and distortion. The major effect results from pressure gradients in the z direction, rather than from the azimuthal gradients [Shiokawa et al., 1998], combined with changes in By and Bx. The reduction of the current density near the equatorial plane is associated with a reduction of the curvature drift which overcompensates changes of the magnetization current and of the gradient B drift current. In contrast to the inertial current effects, the pressure gradient effects persist even after the burst of earthward flow ends.

  13. Casimir Effect for a Semitransparent Wedge and an Annular Piston

    CERN Document Server

    Milton, Kimball A; Kirsten, Klaus

    2009-01-01

    We consider the Casimir energy due to a massless scalar field in a geometry of an infinite wedge closed by a Dirichlet circular cylinder, where the wedge is formed by $\\delta$-function potentials, so-called semitransparent boundaries. A finite expression for the Casimir energy corresponding to the arc and the presence of both semitransparent potentials is obtained, from which the torque on the sidewalls can be derived. The most interesting part of the calculation is the nontrivial nature of the angular mode functions. Numerical results are obtained which are closely analogous to those recently found for a magnetodielectric wedge, with the same speed of light on both sides of the wedge boundaries. Alternative methods are developed for annular regions with radial semitransparent potentials, based on reduced Green's functions for the angular dependence, which allows calculations using the multiple-scattering formalism. Numerical results corresponding to the torque on the radial plates are likewise computed, whic...

  14. Electrodynamic Casimir effect in a medium-filled wedge.

    Science.gov (United States)

    Brevik, Iver; Ellingsen, Simen A; Milton, Kimball A

    2009-04-01

    We re-examine the electrodynamic Casimir effect in a wedge defined by two perfect conductors making dihedral angle alpha=pi/p. This system is analogous to the system defined by a cosmic string. We consider the wedge region as filled with an azimuthally symmetric material, with permittivity and permeability epsilon1, micro1 for distance from the axis ra. The results are closely related to those for a circular-cylindrical geometry, but with noninteger azimuthal quantum number mp. Apart from a zero-mode divergence, which may be removed by choosing periodic boundary conditions on the wedge, and may be made finite if dispersion is included, we obtain finite results for the free energy corresponding to changes in a for the case when the speed of light is the same inside and outside the radius a , and for weak coupling, |epsilon1-epsilon2|cosmic string, situated along the cusp line of the pre-existing wedge.

  15. ELASTIC INTERACTION BETWEEN WEDGE DISCLINATION DIPOLE AND INTERNAL CRACK

    Institute of Scientific and Technical Information of China (English)

    FANG Qi-hong; LIU You-wen

    2006-01-01

    The system of a wedge disclination dipole interacting with an internal crack was investigated. By using the complex variable method, the closed form solutions of complex potentials to this problem were presented. The analytic formulae of the physics variables, such as stress intensity factors at the tips of the crack produced by the wedge disclination dipole and the image force acting on disclination dipole center were obtained.The influence of the orientation, the dipole arm and the location of the disclination dipole on the stress intensity factors was discussed in detail. Furthermore, the equilibrium position of the wedge disclination dipole was also examined. It is shown that the shielding or antishielding effect of the wedge disclination to the stress intensity factors is significant when the disclination dipole moves to the crack tips.

  16. Reactive Atom Plasma Processing of Slumped Glass Wedges Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Reactive Atom Plasma (RAPTM) process will be evaluated as a rapid and practical method for fabricating precision wedges in glass sheets. The glass sheets are to...

  17. Upper crustal mechanical stratigraphy and the evolution of thrust wedges: insights from sandbox analogue experiments

    Science.gov (United States)

    Milazzo, Flavio; Storti, Fabrizio; Nestola, Yago; Cavozzi, Cristian; Magistroni, Corrado; Meda, Marco; Salvi, Francesca

    2016-04-01

    Crustal mechanical stratigraphy i.e. alternating mechanically weaker and stronger layers within the crust, plays a key role in determining how contractional deformations are accommodated at convergent plate boundaries. In the upper crust, evaporites typically provide preferential décollement layers for fault localization and foreland ward propagation, thus significantly influencing evolution of thrust-fold belts in terms of mechanical balance, geometries, and chronological sequences of faulting. Evaporites occur at the base of many passive margin successions that underwent positive inversion within orogenic systems. They typically produce salient geometries in deformation fronts, as in the Jura in the Northern Alps, the Salakh Arch in the Oman Mountains, or the Ainsa oblique thrust-fold belt in the Spanish Pyrenees. Evaporites frequently occur also in foredeep deposits, as in the Apennines, the Pyrenees, the Zagros etc. causing development of additional structural complexity. Low-friction décollement layers also occur within sedimentary successions involved in thrust-fold belts and they contribute to the development of staircase fault trajectories. The role of décollement layers in thrust wedge evolution has been investigated in many experimental works, particularly by sandbox analogue experiments that have demonstrated the impact of basal weak layers on many first order features of thrust wedges, including the dominant fold vergence, the timing of fault activity, and the critical taper. Some experiments also investigated on the effects of weak layers within accreting sedimentary successions, showing how this triggers kinematic decoupling of the stratigraphy above and below the décollements, thus enhancing disharmonic deformation. However, at present a systematic experimental study of the deformation modes of an upper crustal mechanical stratigraphy consisting of both low-friction and viscous décollement layers is still missing in the specific literature. In

  18. Scattering of wedges and cones with impedance boundary conditions

    CERN Document Server

    Lyalinov, Mikhail

    2012-01-01

    This book is a systematic and detailed exposition of different analytical techniques used in studying two of the canonical problems, the wave scattering by wedges or cones with impedance boundary conditions. It is the first reference on novel, highly efficient analytical-numerical approaches for wave diffraction by impedance wedges or cones. The applicability of the reported solution procedures and formulae to existing software packages designed for real-world high-frequency problems encountered in antenna, wave propagation, and radar cross section.

  19. Optical refractometry based on Fresnel diffraction from a phase wedge.

    Science.gov (United States)

    Tavassoly, M Taghi; Saber, Ahad

    2010-11-01

    A method that utilizes the Fresnel diffraction of light from the phase step formed by a transparent wedge is introduced for measuring the refractive indices of transparent solids, liquids, and solutions. It is shown that, as a transparent wedge of small apex angle is illuminated perpendicular to its surface by a monochromatic parallel beam of light, the Fresnel fringes, caused by abrupt change in refractive index at the wedge lateral boundary, are formed on a screen held perpendicular to the beam propagation direction. The visibility of the fringes varies periodically between zero and 1 in the direction normal to the wedge apex. For a known or measured apex angle, the wedge refractive index is obtained by measuring the period length by a CCD. To measure the refractive index of a transparent liquid or solution, the wedge is installed in a transparent rectangle cell containing the sample. Then, the cell is illuminated perpendicularly and the visibility period is measured. By using modest optics, one can measure the refractive index at a relative uncertainty level of 10(-5). There is no limitation on the refractive index range. The method can be applied easily with no mechanical manipulation. The measuring apparatus can be very compact with low mechanical and optical noises.

  20. Conceptual design of heavy ion beam compression using a wedge

    Directory of Open Access Journals (Sweden)

    Jonathan C. Wong

    2015-10-01

    Full Text Available Heavy ion beams are a useful tool for conducting high energy density physics (HEDP experiments. Target heating can be enhanced by beam compression, because a shorter pulse diminishes hydrodynamic expansion during irradiation. A conceptual design is introduced to compress ∼100  MeV/u to ∼GeV/u heavy ion beams using a wedge. By deflecting the beam with a time-varying field and placing a tailor-made wedge amid its path downstream, each transverse slice passes through matter of different thickness. The resulting energy loss creates a head-to-tail velocity gradient, and the wedge shape can be designed by using stopping power models to give maximum compression at the target. The compression ratio at the target was found to vary linearly with (head-to-tail centroid offset/spot radius at the wedge. The latter should be approximately 10 to attain tenfold compression. The decline in beam quality due to projectile ionization, energy straggling, fragmentation, and scattering is shown to be acceptable for well-chosen wedge materials. A test experiment is proposed to verify the compression scheme and to study the beam-wedge interaction and its associated beam dynamics, which will facilitate further efforts towards a HEDP facility.

  1. Oblique septal crossbar graft for anterior septal angle reconstruction.

    Science.gov (United States)

    Aziz, Zeeshan S; Brenner, Michael J; Putman, Harrison C

    2010-01-01

    Nasal septal deformity is a central feature of the crooked nose, contributing to functional and aesthetic problems. Straightening of the septum often requires resection, scoring, or incision of the septum--maneuvers that inevitably weaken the cartilaginous dorsal and caudal L-shaped struts, which together are known as the L-strut. Compromise of this L-strut predisposes to septal buckling, recurrent deviation, and saddle nose deformity. We describe our experience with the oblique septal crossbar, a structural graft that allows biomechanically sound anterior septal angle reconstruction during septorhinoplasty. The technique improves dorsal septal support and facilitates correction of the crooked nose. The open septorhinoplasty approach and swinging door maneuver are followed by placement of a diagonally oriented crossbar graft, obtained from cartilage or the perpendicular plate. The approach allows consistent midline correction and buttressing of the nasal dorsum, with no complications to date.

  2. Emulating Nonreciprocity with Spatially Dispersive Metasurfaces Excited at Oblique Incidence

    Science.gov (United States)

    Pfeiffer, Carl; Grbic, Anthony

    2016-08-01

    Ultrathin metasurfaces supporting transverse surface currents provide extreme electromagnetic wave front and polarization control. Here, it is shown that adding longitudinal (normal) surface currents significantly expands the scope of electromagnetic phenomena that can be engineered with reciprocal materials. In particular, these metasurfaces are inherently spatially dispersive, which allows them to emulate nonreciprocal phenomena. It is analytically shown that spatially dispersive metasurfaces are effectively self-biased by the transverse momentum of the incident wave front. Long-standing notions of what makes a metasurface reciprocal are reinvestigated, and generalized reciprocity relations are derived. Several metasurfaces are designed that imitate Faraday rotation and optical isolation when illuminated with obliquely incident plane waves and normally incident vortex beams. These new surfaces break the inherent symmetry of previous metasurface designs, enabling low-profile devices with unprecedented functionality.

  3. Photogrammetric Processing of Apollo 15 Metric Camera Oblique Images

    Science.gov (United States)

    Edmundson, K. L.; Alexandrov, O.; Archinal, B. A.; Becker, K. J.; Becker, T. L.; Kirk, R. L.; Moratto, Z. M.; Nefian, A. V.; Richie, J. O.; Robinson, M. S.

    2016-06-01

    The integrated photogrammetric mapping system flown on the last three Apollo lunar missions (15, 16, and 17) in the early 1970s incorporated a Metric (mapping) Camera, a high-resolution Panoramic Camera, and a star camera and laser altimeter to provide support data. In an ongoing collaboration, the U.S. Geological Survey's Astrogeology Science Center, the Intelligent Robotics Group of the NASA Ames Research Center, and Arizona State University are working to achieve the most complete cartographic development of Apollo mapping system data into versatile digital map products. These will enable a variety of scientific/engineering uses of the data including mission planning, geologic mapping, geophysical process modelling, slope dependent correction of spectral data, and change detection. Here we describe efforts to control the oblique images acquired from the Apollo 15 Metric Camera.

  4. Benchmarking analogue models of brittle thrust wedges

    Science.gov (United States)

    Schreurs, Guido; Buiter, Susanne J. H.; Boutelier, Jennifer; Burberry, Caroline; Callot, Jean-Paul; Cavozzi, Cristian; Cerca, Mariano; Chen, Jian-Hong; Cristallini, Ernesto; Cruden, Alexander R.; Cruz, Leonardo; Daniel, Jean-Marc; Da Poian, Gabriela; Garcia, Victor H.; Gomes, Caroline J. S.; Grall, Céline; Guillot, Yannick; Guzmán, Cecilia; Hidayah, Triyani Nur; Hilley, George; Klinkmüller, Matthias; Koyi, Hemin A.; Lu, Chia-Yu; Maillot, Bertrand; Meriaux, Catherine; Nilfouroushan, Faramarz; Pan, Chang-Chih; Pillot, Daniel; Portillo, Rodrigo; Rosenau, Matthias; Schellart, Wouter P.; Schlische, Roy W.; Take, Andy; Vendeville, Bruno; Vergnaud, Marine; Vettori, Matteo; Wang, Shih-Hsien; Withjack, Martha O.; Yagupsky, Daniel; Yamada, Yasuhiro

    2016-11-01

    We performed a quantitative comparison of brittle thrust wedge experiments to evaluate the variability among analogue models and to appraise the reproducibility and limits of model interpretation. Fifteen analogue modeling laboratories participated in this benchmark initiative. Each laboratory received a shipment of the same type of quartz and corundum sand and all laboratories adhered to a stringent model building protocol and used the same type of foil to cover base and sidewalls of the sandbox. Sieve structure, sifting height, filling rate, and details on off-scraping of excess sand followed prescribed procedures. Our analogue benchmark shows that even for simple plane-strain experiments with prescribed stringent model construction techniques, quantitative model results show variability, most notably for surface slope, thrust spacing and number of forward and backthrusts. One of the sources of the variability in model results is related to slight variations in how sand is deposited in the sandbox. Small changes in sifting height, sifting rate, and scraping will result in slightly heterogeneous material bulk densities, which will affect the mechanical properties of the sand, and will result in lateral and vertical differences in peak and boundary friction angles, as well as cohesion values once the model is constructed. Initial variations in basal friction are inferred to play the most important role in causing model variability. Our comparison shows that the human factor plays a decisive role, and even when one modeler repeats the same experiment, quantitative model results still show variability. Our observations highlight the limits of up-scaling quantitative analogue model results to nature or for making comparisons with numerical models. The frictional behavior of sand is highly sensitive to small variations in material state or experimental set-up, and hence, it will remain difficult to scale quantitative results such as number of thrusts, thrust spacing

  5. Spatial variability of E. coli in an urban salt-wedge estuary.

    Science.gov (United States)

    Jovanovic, Dusan; Coleman, Rhys; Deletic, Ana; McCarthy, David

    2017-01-15

    This study investigated the spatial variability of a common faecal indicator organism, Escherichia coli, in an urban salt-wedge estuary in Melbourne, Australia. Data were collected through comprehensive depth profiling in the water column at four sites and included measurements of temperature, salinity, pH, dissolved oxygen, turbidity, and E. coli concentrations. Vertical variability of E. coli was closely related to the salt-wedge dynamics; in the presence of a salt-wedge, there was a significant decrease in E. coli concentrations with depth. Transverse variability was low and was most likely dwarfed by the analytical uncertainties of E. coli measurements. Longitudinal variability was also low, potentially reflecting minimal die-off, settling, and additional inputs entering along the estuary. These results were supported by a simple mixing model that predicted E. coli concentrations based on salinity measurements. Additionally, an assessment of a sentinel monitoring station suggested routine monitoring locations may produce conservative estimates of E. coli concentrations in stratified estuaries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad/Separation Bolt Wedge Tests

    Science.gov (United States)

    Gokcen, Tahir; Skokova, Kristina A.

    2017-01-01

    This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Panel test articles included a metallic separation bolt imbedded in the compression-pad and heat shield materials, resulting in a circular protuberance over a flat plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the non-equilibrium flow field in the facility nozzle, test box, and flow field over test articles, and comparisons with the measured calibration data.

  7. Integrated waste management as a climate change stabilisation wedge for the Maltese islands.

    Science.gov (United States)

    Falzon, Clyde; Fabri, Simon G; Frysinger, Steven

    2013-01-01

    The continuous increase in anthropogenic greenhouse gas emissions occurring since the Industrial Revolution is offering significant ecological challenges to Earth. These emissions are leading to climate changes which bring about extensive damage to communities, ecosystems and resources. The analysis in this article is focussed on the waste sector within the Maltese islands, which is the largest greenhouse gas emitter in the archipelago following the energy and transportation sectors. This work shows how integrated waste management, based on a life cycle assessment methodology, acts as an effective stabilisation wedge strategy for climate change. Ten different scenarios applicable to the Maltese municipal solid waste management sector are analysed. It is shown that the scenario that is most coherent with the stabilisation wedges strategy for the Maltese islands consists of 50% landfilling, 30% mechanical biological treatment and 20% recyclable waste export for recycling. It is calculated that 16.6 Mt less CO2-e gases would be emitted over 50 years by means of this integrated waste management stabilisation wedge when compared to the business-as-usual scenario. These scientific results provide evidence in support of policy development in Malta that is implemented through legislation, economic instruments and other applicable tools.

  8. Stability analysis of the Martian obliquity during the Noachian era

    OpenAIRE

    2011-01-01

    Abstract We performed numerical simulations of the obliquity evolution of Mars during the Noachian era, at which time the giant planets were on drastically different orbits than today. For the preferred primordial configuration of the planets we find that there are two large zones where the Martian obliquity is stable and oscillates with an amplitude lower than 20?. These zones occur at obliquities below 30?and above 60?; intermediate values show either resonant or chaotic behaviou...

  9. Calculating dose distributions and wedge factors for photon treatment fields with dynamic wedges based on a convolution/superposition method.

    Science.gov (United States)

    Liu, H H; McCullough, E C; Mackie, T R

    1998-01-01

    A convolution/superposition based method was developed to calculate dose distributions and wedge factors in photon treatment fields generated by dynamic wedges. This algorithm used a dual source photon beam model that accounted for both primary photons from the target and secondary photons scattered from the machine head. The segmented treatment tables (STT) were used to calculate realistic photon fluence distributions in the wedged fields. The inclusion of the extra-focal photons resulted in more accurate dose calculation in high dose gradient regions, particularly in the beam penumbra. The wedge factors calculated using the convolution method were also compared to the measured data and showed good agreement within 0.5%. The wedge factor varied significantly with the field width along the moving jaw direction, but not along the static jaw or the depth direction. This variation was found to be determined by the ending position of the moving jaw, or the STT of the dynamic wedge. In conclusion, the convolution method proposed in this work can be used to accurately compute dose for a dynamic or an intensity modulated treatment based on the fluence modulation in the treatment field.

  10. Ice wedges as climate archives - opportunities and limitations

    Science.gov (United States)

    Opel, Thomas; Meyer, Hanno; Dereviagin, Alexander; Wetterich, Sebastian; Schirrmeister, Lutz

    2014-05-01

    Permafrost regions are assumed to play a major role for Global Climate Change as they are susceptible to recent warming in particular with regard to the potential release of stored fossil carbon. Permafrost serves as archive of past environmental and climate conditions (such as sedimentation processes, temperature and precipitation regimes as well as landscape and ecosystem development) over tens of thousands of years that can be traced by the study of the frozen deposits, paleontological content and ground ice. Ground ice comprises all types of ice contained in frozen ground, including pore ice, segregation ice and ice wedges. Here, we focus on ice wedges as the most promising climate archive that can be studied by stable water isotope methods analogously to glacier ice. They may be identified by their vertically oriented foliations. Ice wedges form by the repeated filling of wintertime thermal contraction cracks by snow melt water in spring. As the melt water quickly refreezes at negative ground temperature no isotopic fractionation takes place. Hence, the isotopic composition (δ18O, δD, d excess) of wedge ice is assumed to be representative of annual cold period climate conditions, i.e. winter and spring. Ice wedges are widely distributed in non-glaciated high northern latitudes, are diagnostic of permafrost and, in general, indicative of cold and stable climate conditions. They are found in continuous and discontinuous permafrost zones and may also have formed during and survived interglacials. They may provide unique paleo information that is not captured by other climate archives. Usually, ice wedges are dated by radiocarbon dating of organic material incorporated in the ice, but also 36Cl/Cl ratios have been successfully used to date ice wedges. Nevertheless reliable age determination is challenging when studying ice wedges. Here we tackle the potential of ice wedges from the Siberian and American Arctic to trace past climate changes from stable isotope

  11. Oblique Water Wave Diffraction by a Step

    Directory of Open Access Journals (Sweden)

    Dolai P.

    2017-02-01

    Full Text Available This paper is concerned with the problem of diffraction of an obliquely incident surface water wave train on an obstacle in the form of a finite step. Havelock expansions of water wave potentials are used in the mathematical analysis to obtain the physical parameters reflection and transmission coefficients in terms of integrals. Appropriate multi-term Galerkin approximations involving ultraspherical Gegenbauer polynomials are utilized to obtain a very accurate numerical estimate for reflection and transmission coefficients which are depicted graphically. From these figures various interesting results are discussed.

  12. Oblique Water Wave Diffraction by a Step

    Science.gov (United States)

    Dolai, P.

    2017-02-01

    This paper is concerned with the problem of diffraction of an obliquely incident surface water wave train on an obstacle in the form of a finite step. Havelock expansions of water wave potentials are used in the mathematical analysis to obtain the physical parameters reflection and transmission coefficients in terms of integrals. Appropriate multi-term Galerkin approximations involving ultraspherical Gegenbauer polynomials are utilized to obtain a very accurate numerical estimate for reflection and transmission coefficients which are depicted graphically. From these figures various interesting results are discussed.

  13. A note on oblique water entry

    KAUST Repository

    Moore, M. R.

    2012-10-02

    A minor error in Howison et al. (J. Eng. Math. 48:321-337, 2004) obscured the fact that the points at which the free surface turns over in the solution of the Wagner model for the oblique impact of a two-dimensional body are directly related to the turnover points in the equivalent normal impact problem. This note corrects some of the earlier results given in Howison et al. (J. Eng. Math. 48:321-337, 2004) and discusses the implications for the applicability of the Wagner model. © 2012 Springer Science+Business Media B.V.

  14. Non-oblique Correction in Extenden Technicolor Theory

    CERN Document Server

    Kitazawa, N

    1993-01-01

    We study radiative corrections on $Zb{\\bar b}$ vertex generated by the ETC gauge bosons, ``diagonal'' as well as sideways. Although the oblique corrections due to the ETC bosons are small in comparison with the oblique correction due to the technicolor dynamics, the non-oblique corrections result in substantial shift of contour plot in the $S$-$T$ plane. We show that such a shift due to the non-oblique corrections is actually important for discussing $S$ and $T$ values in the technicolor models.

  15. Ionospheric heating with oblique HF waves

    Science.gov (United States)

    Field, Edward C., Jr.; Bloom, Ron M.

    1990-10-01

    Calculations of ionospheric electron density perturbations and ground-level signal changes produce by intense oblique high frequency (HF) transmitters are presented. This analysis considers radio field focusing at caustics, the consequent joule-heating of the surrounding plasma, heat conduction, diffusion, and recombination processes: these being the effects of a powerful oblique 'modifying' wave. It neglects whatever plasma instabilities might occur. Then effects on a secondary 'test' wave that is propagated along the same path as the first are investigated. Calculations predict ground-level field-strength reductions of several dB in the test wave for modifying waves having ERP in the 85 to 90 dBW range. These field-strength changes are similar in sign, magnitude, and location to ones measured in Soviet experiments. The results are sensitive to the model ionosphere assumed, so future experiments should employ the widest possible range of frequencies and propagation conditions. An effective power of 90 dBW seems to be a sort of threshold that, if exceeded, results in substantial rather than small signal changes. The conclusions are based solely on joule-heating and subsequent defocusing of waves passing through caustic regions.

  16. The evolving energy budget of accretionary wedges

    Science.gov (United States)

    McBeck, Jessica; Cooke, Michele; Maillot, Bertrand; Souloumiac, Pauline

    2017-04-01

    The energy budget of evolving accretionary systems reveals how deformational processes partition energy as faults slip, topography uplifts, and layer-parallel shortening produces distributed off-fault deformation. The energy budget provides a quantitative framework for evaluating the energetic contribution or consumption of diverse deformation mechanisms. We investigate energy partitioning in evolving accretionary prisms by synthesizing data from physical sand accretion experiments and numerical accretion simulations. We incorporate incremental strain fields and cumulative force measurements from two suites of experiments to design numerical simulations that represent accretionary wedges with stronger and weaker detachment faults. One suite of the physical experiments includes a basal glass bead layer and the other does not. Two physical experiments within each suite implement different boundary conditions (stable base versus moving base configuration). Synthesizing observations from the differing base configurations reduces the influence of sidewall friction because the force vector produced by sidewall friction points in opposite directions depending on whether the base is fixed or moving. With the numerical simulations, we calculate the energy budget at two stages of accretion: at the maximum force preceding the development of the first thrust pair, and at the minimum force following the development of the pair. To identify the appropriate combination of material and fault properties to apply in the simulations, we systematically vary the Young's modulus and the fault static and dynamic friction coefficients in numerical accretion simulations, and identify the set of parameters that minimizes the misfit between the normal force measured on the physical backwall and the numerically simulated force. Following this derivation of the appropriate material and fault properties, we calculate the components of the work budget in the numerical simulations and in the

  17. Implementation of enhanced dynamic wedge in the focus rtp system.

    Science.gov (United States)

    Miften, M; Wiesmeyer, M; Beavis, A; Takahashi, K; Broad, S

    2000-01-01

    The FOCUS RTP system implementation of Varian's enhanced dynamic wedge (EDW) is presented. Calculations of both dose distributions and wedge factors (WFs) are based on segmented treatment tables (STTs). Calculating dose requires a "transmission matrix" derived from an STT to model the modified fluence from the source. The dose calculation is then performed using either the Clarkson or convolution/superposition algorithms. An initial "primary dose/monitor unit (MU) fraction" WF estimate at the weight point of symmetric and asymmetric fields is calculated from the STT as the ratio of MU delivered on the axis of the weight point divided by total MU delivered for the treatment field. In our approach, we go beyond this initial estimate with a "scatter dose" correction. This requires measured 60 degrees WFs for 5 fields. Scatter corrections derived from measured WFs are interpolated for other wedge angles and field sizes in much the same way as arbitrary wedge angle STTs are derived from a "golden STT" using the "ratio of tangents" formalism. Dose comparisons with measured distributions show good agreement to within 3% or 3 mm for 6-MV beams and all EDW angles. Agreement with measurements to within 1% is obtained for WFs in all symmetric and asymmetric fields for 6- and 10-MV beams. For large wedge angles and field sizes, this represents a significant improvement over the 3% to 4% errors often observed using the MU fraction model alone.

  18. How sedimentation affects rift segment interaction during oblique extension: a 4D analogue modelling study

    Science.gov (United States)

    Zwaan, Frank; Schreurs, Guido; Adam, Jürgen

    2017-04-01

    prevents the viscous sand/silicone layer from isostatic rising as observed in the models without sedimentation. In models with syn-rift sedimentation, the rift wedge sinks into the viscous seed below. Analysis of surface structures indicates that sedimentation also results in differences in internal fault structures within the rift. In order to validate our first experimental results, we will (re)run various models in a X-Ray CT-scanner to reveal their internal structure in detail. Combined with high-resolution surface scanning of the model topography, a thorough 4D surface and internal evolution assessment will be possible, including tomographic strain analysis using Digital Volume Correlation techniques (DVC). REFERENCES Bialas and Buck, 2009, How sediment promotes narrow rifting: Application to the Gulf of California. Tectonics 28, TC4014 Brune, Popov and Sobolev, 2012, Modeling suggests that oblique extension facilitates rifting and continental break-up. Journal of Geophysical Research 117, B08402 Zwaan, Naliboff, Schreurs and Buiter, 2016, Insights into the effects of oblique extension on continental rift interaction from 3D analogue and numerical models. Tectonophysics 693, Part B, 239-260

  19. Reduced Oblique Effect in Children with Autism Spectrum Disorders (ASD)

    Science.gov (United States)

    Sysoeva, Olga V.; Davletshina, Maria A.; Orekhova, Elena V.; Galuta, Ilia A.; Stroganova, Tatiana A.

    2016-01-01

    People are very precise in the discrimination of a line orientation relative to the cardinal (vertical and horizontal) axes, while their orientation discrimination sensitivity along the oblique axes is less refined. This difference in discrimination sensitivity along cardinal and oblique axes is called the “oblique effect.” Given that the oblique effect is a basic feature of visual processing with an early developmental origin, its investigation in children with Autism Spectrum Disorder (ASD) may shed light on the nature of visual sensory abnormalities frequently reported in this population. We examined line orientation sensitivity along oblique and vertical axes in a sample of 26 boys with ASD (IQ > 68) and 38 typically developing (TD) boys aged 7–15 years, as well as in a subsample of carefully IQ-matched ASD and TD participants. Children were asked to detect the direction of tilt of a high-contrast black-and-white grating relative to vertical (90°) or oblique (45°) templates. The oblique effect was reduced in children with ASD as compared to TD participants, irrespective of their IQ. This reduction was due to poor orientation sensitivity along the vertical axis in ASD children, while their ability to discriminate line orientation along the oblique axis was unaffected. We speculate that this deficit in sensitivity to vertical orientation may reflect disrupted mechanisms of early experience-dependent learning that takes place during the critical period for orientation selectivity. PMID:26834540

  20. Interface Defeat of Long Rods Impacting Oblique Silicon Carbide

    Science.gov (United States)

    2011-02-01

    Test data for gold rods impacting unconfined silicon carbide targets are reported. This work focuses on the dwell phenomenon exhibited by silicon ... carbide for targets at obliquity. Experiments are presented for obliquities of 30 deg, 45 deg and 60 deg, with and without cover plates. Results are compared to normal impact.

  1. 33 CFR 118.90 - Bridges crossing channel obliquely.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Bridges crossing channel obliquely. 118.90 Section 118.90 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.90 Bridges crossing channel obliquely....

  2. Casimir effect at nonzero temperature for wedges and cylinders

    CERN Document Server

    Ellingsen, Simen Å; Milton, Kimball A

    2010-01-01

    We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2\\pi naT$, $a$ being the radius of the cylinder or cylindrical arc. We show explicitly that the known zero temperature result is regained in the limit $aT\\to 0$ and that previously derived high temperature asymptotics for the cylindrical shell are reproduced exactly.

  3. Dislocation Nucleation and Pileup under a Wedge Contact at Nanoscale

    Directory of Open Access Journals (Sweden)

    Y. F. Gao

    2008-01-01

    Full Text Available Indentation responses of crystalline materials have been found to be radically different at micrometer and nanometer scales. The latter is usually thought to be controlled by the nucleation of dislocations. To explore this physical process, a dislocation mechanics study is performed to determine the conditions for the nucleation of a finite number of dislocations under a two-dimensional wedge indenter, using the Rice-Thomson nucleation criterion. The configurational force on the dislocation consists of the applied force, the image force, and the interaction force between dislocations. Dislocations reach equilibrium positions when the total driving force equals the effective Peierls stress, giving a set of nonlinear equations that can be solved using the Newton-Raphson method. When the apex angle of the wedge indenter increases, the critical contact size for dislocation nucleation increases rapidly, indicating that dislocation multiplication near a blunt wedge tip is extremely difficult. This geometric dependence agrees well with experimental findings.

  4. Surface Geophysical Measurements for Locating and Mapping Ice-Wedges

    DEFF Research Database (Denmark)

    Ingeman-Nielsen, Thomas; Tomaskovicova, Sonia; Larsen, S.H.

    2012-01-01

    With the presently observed trend of permafrost warming and degradation, the development and availability of effective tools to locate and map ice-rich soils and massive ground ice is of increasing importance. This paper presents a geophysical study of an area with polygonal landforms in order...... to test the applicability of DC electrical resistivity tomography (ERT) and Ground Penetrating Radar (GPR) to identifying and mapping ice-wedge occurrences. The site is located in Central West Greenland, and the ice-wedges are found in a permafrozen peat soil with an active layer of about 30 cm. ERT...... and GPR measurements give a coherent interpretation of possible ice-wedge locations, and active layer probing show a tendency for larger thaw depth in the major trench systems consistent with a significant temperature (at 10 cm depth) increase in these trenches identified by thermal profiling. Three...

  5. Modeling and Stability Analysis of Wedge Clutch System

    Directory of Open Access Journals (Sweden)

    Jian Yao

    2014-01-01

    Full Text Available A wedge clutch with unique features of self-reinforcement and small actuation force was designed. Its self-reinforcement feature, associated with different factors such as the wedge angle and friction coefficient, brings different dynamics and unstable problem with improper parameters. To analyze this system, a complete mathematical model of the actuation system is built, which includes the DC motor, the wedge mechanism, and the actuated clutch pack. By considering several nonlinear factors, such as the slip-stick friction and the contact or not of the clutch plates, the system is piecewise linear. Through the stability analysis of the linearized system in clutch slipping phase, the stable condition of the designed parameters is obtained as α>arctan⁡(μc. The mathematical model of the actuation system is validated by prototype testing. And with the validated model, the system dynamics in both stable and unstable conditions is investigated and discussed in engineering side.

  6. Tricritical wedge filling transitions with short-ranged forces

    Energy Technology Data Exchange (ETDEWEB)

    Romero-Enrique, J M [Departamento de Fisica Atomica, Molecular y Nuclear, Area de Fisica Teorica, Universidad de Sevilla, Apartado de Correos 1065, 41080 Sevilla (Spain); Parry, A O [Department of Mathematics, Imperial College 180 Queen' s Gate, London SW7 2BZ (United Kingdom)

    2005-11-16

    We show that the 3D wedge filling transition in the presence of short-ranged interactions can be first order or second order depending on the strength of the line tension associated with the wedge bottom. This fact implies the existence of a tricritical point characterized by a short-distance expansion which differs from the usual continuous filling transition. Our analysis is based on an effective one-dimensional model for the 3D wedge filling, which arises from the identification of the breather modes as the only relevant interfacial fluctuations. From such analysis we find a correspondence between continuous 3D filling at bulk coexistence and 2D wetting transitions with random-bond disorder.

  7. Obliquity Variability of a Potentially Habitable Early Venus

    CERN Document Server

    Barnes, Jason W; Lissauer, Jack J; Chambers, John; Hedman, Matthew M

    2016-01-01

    Venus currently rotates slowly, with its spin controlled by solid-body and atmospheric thermal tides. However, conditions may have been far different 4 billion years ago, when the Sun was fainter and most of the carbon within Venus could have been in solid form, implying a low-mass atmosphere. We investigate how the obliquity would have varied for a hypothetical rapidly rotating Early Venus. The obliquity variation structure of an ensemble of hypothetical Early Venuses is simpler than that Earth would have if it lacked its large Moon (Lissauer et al., 2012), having just one primary chaotic regime at high prograde obliquities. We note an unexpected long-term variability of up to $\\pm7^\\circ$ for retrograde Venuses. Low-obliquity Venuses show very low total obliquity variability over billion-year timescales -- comparable to that of the real Moon-influenced Earth.

  8. The Role of Rift Obliquity During Pangea Fragmentation

    Science.gov (United States)

    Brune, S.; Butterworth, N. P.; Williams, S.; Müller, D.

    2014-12-01

    Does supercontinent break-up follow specific laws? What parameters control the success and the failure of rift systems? Recent analytical and geodynamic modeling suggests that oblique rifting is energetically preferred over orthogonal rifting. This implies that during rift competition, highly oblique branches proceed to break-up while less oblique ones become inactive. These models predict that the relative motion of Earth's continents during supercontinent break-up is affected by the orientation and shape of individual rift systems. Here, we test this hypothesis based on latest plate tectonic reconstructions. Using PyGPlates, a recently developed Python library that allows script-based access to the plate reconstruction software GPlates, we quantify rift obliquity, extension velocity and their temporal evolution for continent-scale rift systems of the past 200 Myr. Indeed we find that many rift systems contributing to Pangea fragmentation involved strong rift obliquity. East and West Gondwana for instance split along the East African coast with a mean obliquity of 55° (measured as the angle between local rift trend normal and extension direction). While formation of the central and southern South Atlantic segment involved a low obliquity of 10°, the Equatorial Atlantic opened under a high angle of 60°. Rifting between Australia and Antarctica involved two stages with 25° prior to 100 Ma followed by 50° obliquity and distinct increase of extension velocity. Analyzing the entire passive margin system that formed during Pangea breakup, we find a mean obliquity of 40°, with a standard deviation of 20°. Hence 50% of these margins formed with an angle of 40° or more. Considering that many conceptual models of rifting and passive margin formation assume 2D deformation, our study quantifies the degree to which such 2D models are globally applicable, and highlights the importance of 3D models where oblique rifting is the dominant mode of deformation.

  9. Flow Analysis for the Falkner–Skan Wedge Flow

    DEFF Research Database (Denmark)

    Bararnia, H; Haghparast, N; Miansari, M

    2012-01-01

    the constant coefficients in the approximated solution. The effects of the polynomial terms of HAM are considered and the accuracy of the results is shown, which increases with the increasing polynomial terms of HAM. Analytical results for the dimensionless velocity and temperature profiles of the wedge flow......In this article an analytical technique, namely the homotopy analysis method (HAM), is applied to solve the momentum and energy equations in the case of a two-dimensional incompressible flow passing over a wedge. The trail and error method and Padé approximation strategies have been used to obtain...

  10. Molecular Depth Profiling with Cluster SIMS and Wedges

    Science.gov (United States)

    Mao, Dan; Wucher, Andreas; Winograd, Nicholas

    2009-01-01

    Secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by 40 keV C60+ bombardment of a 395-nm thin film of Irganox 1010 doped with four delta layers of Irganox 3114. The wedge structure creates a laterally magnified cross section of the film. From an examination of the resulting surface, information about depth resolution, topography and erosion rate can be obtained as a function of crater depth in a single experiment. This protocol provides a straightforward way to determine the parameters necessary to characterize molecular depth profiles, and to obtain an accurate depth scale for erosion experiments. PMID:19968247

  11. Surgical treatment of idiopathic syringomyelia: Silastic wedge syringosubarachnoid shunting technique

    Directory of Open Access Journals (Sweden)

    Teck M Soo

    2014-01-01

    Conclusions: Shunting procedures for the syringomyelia disease spectrum have been criticized due to the inconsistent long-term outcomes. This surgical technique used to treat symptomatic idiopathic syringomyelia has been devised based on our intraoperative experience, surgical outcomes, and evaluation of the literature. The purpose of the wedges is to preserve patency of the communication between the syrinx cavity and the expanded subarachnoid space by preventing healing of the myelotomy edges and by maintaining an artificial conduit between the syrinx cavity and the subarachnoid space. Although short-term results are promising, continued long-term follow up is needed to determine the ultimate success of the silastic wedge shunting procedure.

  12. Calibration Procedures on Oblique Camera Setups

    Science.gov (United States)

    Kemper, G.; Melykuti, B.; Yu, C.

    2016-06-01

    Beside the creation of virtual animated 3D City models, analysis for homeland security and city planning, the accurately determination of geometric features out of oblique imagery is an important task today. Due to the huge number of single images the reduction of control points force to make use of direct referencing devices. This causes a precise camera-calibration and additional adjustment procedures. This paper aims to show the workflow of the various calibration steps and will present examples of the calibration flight with the final 3D City model. In difference to most other software, the oblique cameras are used not as co-registered sensors in relation to the nadir one, all camera images enter the AT process as single pre-oriented data. This enables a better post calibration in order to detect variations in the single camera calibration and other mechanical effects. The shown sensor (Oblique Imager) is based o 5 Phase One cameras were the nadir one has 80 MPIX equipped with a 50 mm lens while the oblique ones capture images with 50 MPix using 80 mm lenses. The cameras are mounted robust inside a housing to protect this against physical and thermal deformations. The sensor head hosts also an IMU which is connected to a POS AV GNSS Receiver. The sensor is stabilized by a gyro-mount which creates floating Antenna -IMU lever arms. They had to be registered together with the Raw GNSS-IMU Data. The camera calibration procedure was performed based on a special calibration flight with 351 shoots of all 5 cameras and registered the GPS/IMU data. This specific mission was designed in two different altitudes with additional cross lines on each flying heights. The five images from each exposure positions have no overlaps but in the block there are many overlaps resulting in up to 200 measurements per points. On each photo there were in average 110 well distributed measured points which is a satisfying number for the camera calibration. In a first step with the help of

  13. CALIBRATION PROCEDURES ON OBLIQUE CAMERA SETUPS

    Directory of Open Access Journals (Sweden)

    G. Kemper

    2016-06-01

    Full Text Available Beside the creation of virtual animated 3D City models, analysis for homeland security and city planning, the accurately determination of geometric features out of oblique imagery is an important task today. Due to the huge number of single images the reduction of control points force to make use of direct referencing devices. This causes a precise camera-calibration and additional adjustment procedures. This paper aims to show the workflow of the various calibration steps and will present examples of the calibration flight with the final 3D City model. In difference to most other software, the oblique cameras are used not as co-registered sensors in relation to the nadir one, all camera images enter the AT process as single pre-oriented data. This enables a better post calibration in order to detect variations in the single camera calibration and other mechanical effects. The shown sensor (Oblique Imager is based o 5 Phase One cameras were the nadir one has 80 MPIX equipped with a 50 mm lens while the oblique ones capture images with 50 MPix using 80 mm lenses. The cameras are mounted robust inside a housing to protect this against physical and thermal deformations. The sensor head hosts also an IMU which is connected to a POS AV GNSS Receiver. The sensor is stabilized by a gyro-mount which creates floating Antenna –IMU lever arms. They had to be registered together with the Raw GNSS-IMU Data. The camera calibration procedure was performed based on a special calibration flight with 351 shoots of all 5 cameras and registered the GPS/IMU data. This specific mission was designed in two different altitudes with additional cross lines on each flying heights. The five images from each exposure positions have no overlaps but in the block there are many overlaps resulting in up to 200 measurements per points. On each photo there were in average 110 well distributed measured points which is a satisfying number for the camera calibration. In a first

  14. MIX and Instability Growth from Oblique Shock

    Energy Technology Data Exchange (ETDEWEB)

    Molitoris, J D; Batteux, J D; Garza, R G; Tringe, J W; Souers, P C; Forbes, J W

    2011-07-22

    We have studied the formation and evolution of shock-induced mix resulting from interface features in a divergent cylindrical geometry. In this research a cylindrical core of high-explosive was detonated to create an oblique shock wave and accelerate the interface. The interfaces studied were between the high-explosive/aluminum, aluminum/plastic, and finally plastic/air. Pre-emplaced surface features added to the aluminum were used to modify this interface. Time sequence radiographic imaging quantified the resulting instability formation from the growth phase to over 60 {micro}s post-detonation. Thus allowing the study of the onset of mix and evolution to turbulence. The plastic used here was porous polyethylene. Radiographic image data are compared with numerical simulations of the experiments.

  15. Partial Oblique Projection Learning for Optimal Generalization

    Institute of Scientific and Technical Information of China (English)

    LIU Benyong; ZHANG Jing

    2004-01-01

    In practice,it is necessary to implement an incremental and active learning for a learning method.In terms of such implementation,this paper shows that the previously discussed S-L projection learning is inappropriate to constructing a family of projection learning,and proposes a new version called partial oblique projection (POP) learning.In POP learning,a function space is decomposed into two complementary subspaces,so that functions belonging to one of the subspaces can be completely estimated in noiseless case;while in noisy case,the dispersions are set to be the smallest.In addition,a general form of POP learning is presented and the results of a simulation are given.

  16. Non-linear critical taper model and determination of accretionary wedge strength

    Science.gov (United States)

    Yang, Che-Ming; Dong, Jia-Jyun; Hsieh, Yuan-Lung; Liu, Hsueh-Hua; Liu, Cheng-Lung

    2016-12-01

    The critical taper model has been widely used to evaluate the strength contrast between the wedge and the basal detachment of fold-and-thrust belts and accretionary wedges. However, determination of the strength parameters using the traditional critical taper model, which adopts the Mohr-Coulomb failure criterion, is difficult, if not impossible. In this study, we propose a modified critical taper model that incorporates the non-linear Hoek-Brown failure criterion. The parameters in the proposed critical Hoek-Brown wedge CHBW model can be directly evaluated via field investigations and laboratory tests. Meanwhile, the wedge strength is a function of the wedge thickness, which is oriented from stress non-linearity. The fold-and-thrust belt in western central Taiwan was used as an example to validate the proposed model. The determined wedge strength was 0.86 using a representative wedge thickness of 5.3 km; this was close to the inferred value of 0.6 from the critical taper. Interestingly, a concave topographic relief is predicted as a result of the wedge thickness dependency of the wedge strength, even if the wedge is composed of homogeneous materials and if the strength of the detachment is uniform. This study demonstrates that the influence of wedge strength on the critical taper angle can be quantified by the spatial distribution of strength variables and by the consideration of the wedge thickness dependency of wedge strength.

  17. A STUDY TO DETERMINE THE ELECTROMYOGRAPHIC ACTIVITY OF VASTUS MEDIALIS OBLIQUE MUSCLE DURING SQUATS ON DIFFERENT SURFACES

    Directory of Open Access Journals (Sweden)

    Kunjal Parekh

    2015-08-01

    Full Text Available Aim: The aim of the study was to examine the effects of squat exercises performed on different surfaces on the activity of the Vastus Medialis Oblique (VMO muscle. Method: Forty healthy subjects performed squat exercises for five seconds each on three different support surfaces: concrete floor, foam, and rubber discs. As the subjects performed the squat exercises on each surface, data on the activity of the vastus medialis oblique was collected using electromyography. Results: The activity of the vastus medialis oblique and was found to be statistically significantly higher (p<0.05 on rubber discs than when the squats were performed on concrete floor or foam. Conclusion: The activation of vastus medialis obilique is more on unstable surfaces. Hence they are more suitable strengthening of VMO.

  18. Obliquity Variations of a Potentially Habitable Early Venus

    Science.gov (United States)

    Barnes, Jason W.; Quarles, Billy L.; Lissauer, Jack J.; Chambers, John E.; Hedman, Matthew M.

    2016-06-01

    Planetary obliquity (axis tilt) and its variations can have strong effects on climate. Earth's glacial cycles, for instance, are driven in part by variations in Earth's obliquity of order ±1.5o. Direct observations of the obliquity of habitable zone rocky exoplanets is likely a long way off. Therefore we investigate the long-term obliquity variations expected for Venus as it might have existed in the early Solar System. Although Venus presently rotates slowly owing to tidal despinning, it must have had a different rotation state early in Solar System history. At the same time, Venus was the Solar System's habitable zone under a Faint Young Sun. Because of our extensive knowledge of the Solar System's constituents, we therefore use Venus' obliquity variations as a proxy for what we might find in exoplanetary systems. We find that the obliquity variation structure is simpler for early Venus than it would be for a Moonless Earth, but that large, chaotic variability can occur for high initial obliquity values. Interestingly retrograde-rotating Venuses show higher variability than do retrograde Moonless Earths.

  19. Obliquity evolution of the minor satellites of Pluto and Charon

    Science.gov (United States)

    Quillen, Alice C.; Nichols-Fleming, Fiona; Chen, Yuan-Yuan; Noyelles, Benoît

    2017-09-01

    New Horizons mission observations show that the small satellites Styx, Nix, Kerberos and Hydra, of the Pluto-Charon system, have not tidally spun-down to near synchronous spin states and have high obliquities with respect to their orbit about the Pluto-Charon binary (Weaver, 2016). We use a damped mass-spring model within an N-body simulation to study spin and obliquity evolution for single spinning non-round bodies in circumbinary orbit. Simulations with tidal dissipation alone do not show strong obliquity variations from tidally induced spin-orbit resonance crossing and this we attribute to the high satellite spin rates and low orbital eccentricities. However, a tidally evolving Styx exhibits intermittent obliquity variations and episodes of tumbling. During a previous epoch where Charon migrated away from Pluto, the minor satellites could have been trapped in orbital mean motion inclination resonances. An outward migrating Charon induces large variations in Nix and Styx's obliquities. The cause is a commensurability between the mean motion resonance frequency and the spin precession rate of the spinning body. As the minor satellites are near mean motion resonances, this mechanism could have lifted the obliquities of all four minor satellites. The high obliquities need not be primordial if the minor satellites were at one time captured into mean motion resonances.

  20. locally fabricated metal step wedge for quality assurance in ...

    African Journals Online (AJOL)

    DR. AMINU

    materials, as well as to investigate an alternative wedge material. The values of the ... The use of low performance x-ray machines. b. ... machine in the Radiology Department of. JUTH is .... the x-ray beam, while ms determines the interaction.

  1. Stark effect in a wedge-shaped quantum box

    CERN Document Server

    Reyes-Esqueda, J A; Castillo-Mussot, M; Vazquez, G J; Reyes-Esqueda, Jorge-Alejandro; Mendoza, Carlos I.; Castillo-Mussot, Marcelo del; Vazquez, Gerardo J.

    2005-01-01

    The effect of an external applied electric field on the electronic ground state energy of a quantum box with a geometry defined by a wedge is studied by carrying out a variational calculation. This geometry could be used as an approximation for a tip of a cantilever of an atomic force microscope. We study theoretically the Stark effect as function of the parameters of the wedge: its diameter, angular aperture and thickness; as well as function of the intensity of the external electric field applied along the axis of the wedge in both directions; pushing the carrier towards the wider or the narrower parts. A confining electronic effect, which is sharper as the wedge dimensions are smaller, is clearly observed for the first case. Besides, the sign of the Stark shift changes when the angular aperture is changed from small angles to angles theta>pi. For the opposite field, the electronic confinement for large diameters is very small and it is also observed that the Stark shift is almost independent with respect t...

  2. Thoracoscopic pulmonary wedge resection without post-operative chest drain

    DEFF Research Database (Denmark)

    Holbek, Bo Laksafoss; Hansen, Henrik Jessen; Kehlet, Henrik

    2016-01-01

    : Forced expiratory volume in 1 s (FEV1) ≥60 % of expected, FEV1/forced vital capacity ≥70 %, tumour diameter ≤2 cm, distance from tumour to visceral pleura ≤3 cm, ≤2 separate wedges, no air leak on an intraoperative air leakage test and absence of severe adhesions, bullous/emphysematous disease, pleural...

  3. Wedges, Cones, Cosmic Strings, and the Reality of Vacuum Energy

    CERN Document Server

    Fulling, S A; Truong, P N; Wagner, J

    2012-01-01

    One of J. Stuart Dowker's most significant achievements has been to observe that the theory of diffraction by wedges developed a century ago by Sommerfeld and others provided the key to solving two problems of great interest in general-relativistic quantum field theory during the last quarter of the twentieth century: the vacuum energy associated with an infinitely thin, straight cosmic string, and (after an interchange of time with a space coordinate) the apparent vacuum energy of empty space as viewed by an accelerating observer. In a sense the string problem is more elementary than the wedge, since Sommerfeld's technique was to relate the wedge problem to that of a conical manifold by the method of images. Indeed, Minkowski space, as well as all cone and wedge problems, are related by images to an infinitely sheeted master manifold, which we call Dowker space. We review the research in this area and exhibit in detail the vacuum expectation values of the energy density and pressure of a scalar field in Dowk...

  4. Discrete dislocation plasticity analysis of the wedge indentation of films

    NARCIS (Netherlands)

    Balint, D. S.; Deshpande, V. S.; Needleman, A.; Van der Giessen, E.

    2006-01-01

    The plane strain indentation of single crystal films on a rigid substrate by a rigid wedge indenter is analyzed using discrete dislocation plasticity. The crystals have three slip systems at +/- 35.3 degrees and 90 degrees with respect to the indentation direction. The analyses are carried out for

  5. Fixed Points of Maps of a Nonaspherical Wedge

    Directory of Open Access Journals (Sweden)

    Merrill Keith

    2009-01-01

    Full Text Available Abstract Let be a finite polyhedron that has the homotopy type of the wedge of the projective plane and the circle. With the aid of techniques from combinatorial group theory, we obtain formulas for the Nielsen numbers of the selfmaps of .

  6. Magnetic and structural instabilities of ultrathin Fe(100) wedges

    Energy Technology Data Exchange (ETDEWEB)

    Bader, S.D.; Li, Dongqi; Qiu, Z.Q.

    1994-05-01

    An overview is provided of recent efforts to explore magnetic and related structural issues for ultrathin Fe films grown epitaxially as wedge structures onto Ag(100) and Cu(100). Experiments were carried out utilizing the surface magneto-optic Kerr effect (SMOKE). Ordinary bcc Fe is lattice-matched to the primitive unit cell of the Ag(100) surface. Fe wedges on Ag(100) can be fabricated whose thick end has in-plane magnetic easy axes due to the shape anisotropy, and whose thin end has perpendicular easy axes due to the surface magnetic anisotrophy. A spin-reorientation transition can thus be studied in the center of the wedge where the competing anisotropies cancel. The goal is to test the Mermin-Wagner theorem which states that long-range order is lost at finite temperatures in an isotropic two-dimensional Heisenberg system. Fe wedges on Cu(100) can be studied in like manner, but the lattice matching permits fcc and tetragonally-distorted fcc phases to provide structural complexity in addition to the interplay of competing magnetic anisotropies. The results of these studies are new phase identifications that help both to put previous work into perspective and to define issues to pursue in the future.

  7. On children's uses of from, by and with in oblique noun phrases.

    Science.gov (United States)

    Clark, E V; Carpenter, K L

    1989-06-01

    This study was designed to follow up children's early spontaneous uses of from to mark oblique agents by giving 40 children (aged 2;5-6;1), and 10 adults, grammatical and ungrammatical sentences containing from, with, and by to imitate and to repair. As predicted, children's imitations and repairs showed that (a) 2-year-olds produce from for agents, and with for instruments in imitation; and (b) as children get older, they shift to by for agents in their repairs, and keep from to mark locative sources. These findings support the hypothesis that when children first try to express oblique agents, before acquisition of conventional by, they choose from for this purpose because agents, as instigators of actions, are conceived of as the source of the action and its result.

  8. Pairs of oblique duals in spaces of periodic functions

    DEFF Research Database (Denmark)

    Christensen, Ole; Goh, Say Song

    2010-01-01

    We construct non-tight frames in finite-dimensional spaces consisting of periodic functions. In order for these frames to be useful in practice one needs to calculate a dual frame; while the canonical dual frame might be cumbersome to work with, the setup presented here enables us to obtain...... explicit constructions of some particularly convenient oblique duals. We also provide explicit oblique duals belonging to prescribed spaces different from the space where we obtain the expansion. In particular this leads to oblique duals that are trigonometric polynomials....

  9. Acquired Brown Syndrome Treated With Traction of Superior Oblique Tendon.

    Science.gov (United States)

    Shin, Kwang Hoon; Paik, Hae Jung; Chi, Mijung

    2016-03-01

    Brown syndrome is a rare strabismic disease characterized by a limited elevation in adduction of the eye. The lengthening/weakening of superior oblique muscle is the main way of surgical intervention for this disease. A 7-year-old boy was diagnosed as having acquired Brown syndrome in his right eye after injury in his face. We experienced successful release of this Brown syndrome through mere pulling outward of superior oblique tendon during surgical exploration. We briefly discuss why this manipulation of superior oblique tendon that we performed was successful.

  10. Klein tunneling through an oblique barrier in graphene ribbons

    CERN Document Server

    Oh, J H

    2010-01-01

    We study a transmission coefficient of graphene nanoribbons with a top gate which acts as an oblique barrier. Using a Green function method based on the Dirac-like equation, scattering among transverse modes due to the oblique barrier is taken into account numerically. In contrast to the 2-dimensional graphene sheet, we find that the pattern of transmission in graphene ribbons depends strongly on the electronic structure in the region of the barrier. Consequently, irregular structures in the transmission coefficient are predicted while perfect transmission is still calculated in the case of metallic graphene independently of angle and length of the oblique barrier.

  11. Direct decision making vs. oblique decision making: which is right?

    Science.gov (United States)

    Kerfoot, Karlene M

    2011-01-01

    The complexity of health care environments is far too complicated for solutions to be developed by a small group or isolated upper managers. This direct leadership approach often fails. Leaders who use a more oblique approach focusing on areas such as long-term economic value, creating significant benefits for the wider community, and building robust social capital within the company are successful. Obliquity leadership is very appropriate for health care because of its constantly changing environment. Obliquity leadership and shared governance are great partners in reaching higher levels of involvement and high performance.

  12. Periodical Plasma Structures Controlled by Oblique Magnetic Field

    CERN Document Server

    Schweigert, Irina

    2016-01-01

    The propulsion type plasma in oblique external magnetic field is studied in 2D3V PIC MCC simulations. A periodical structure with maxima of electron and ion densities appears with an increase of an obliqueness of magnetic field. These ridges of electron and ion densities are aligned with the magnetic field vector and shifted relative each other. As a result the two-dimensional double-layers structure forms in cylindrical plasma chamber. The ion and electron currents on the side wall are essential modulated by the oblique magnetic field.

  13. Wedges, cones, cosmic strings and their vacuum energy

    Science.gov (United States)

    Fulling, S. A.; Trendafilova, C. S.; Truong, P. N.; Wagner, J.

    2012-09-01

    One of J Stuart Dowker’s most significant achievements has been to observe that the theory of diffraction by wedges developed a century ago by Sommerfeld and others provided the key to solving two problems of great interest in general-relativistic quantum field theory during the last quarter of the 20th century: the vacuum energy associated with an infinitely thin, straight cosmic string, and (after an interchange of time with a space coordinate) the apparent vacuum energy of empty space as viewed by an accelerating observer. In a sense the string problem is more elementary than the wedge, since Sommerfeld’s technique was to relate the wedge problem to that of a conical manifold by the method of images. Indeed, Minkowski space, as well as all cone and wedge problems, are related by images to an infinitely sheeted master manifold, which we call Dowker space. We review the research in this area and exhibit in detail the vacuum expectation values of the energy density and pressure of a scalar field in Dowker space and the cone and wedge spaces that result from it. We point out that the (vanishing) vacuum energy of Minkowski space results, from the point of view of Dowker space, from the quantization of angular modes, in precisely the way that the Casimir energy of a toroidal closed universe results from the quantization of Fourier modes; we hope that this understanding dispels any lingering doubts about the reality of cosmological vacuum energy. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical in honour of Stuart Dowker’s 75th birthday devoted to ‘Applications of zeta functions and other spectral functions in mathematics and physics’.

  14. Effect of modified inferior oblique anterior transposition on dissociated vertical strabismus patients with inferior oblique muscle hyperfunction

    Directory of Open Access Journals (Sweden)

    Xi-Lang Wang

    2017-02-01

    Full Text Available AIM: To investigate the effect of anterior transposition of inferior oblique muscle on the treatment of dissociated vertical deviation(DVDin children with inferior oblique overaction(IOOAand unequal inferior oblique transposition of the treatment of IOOA with the eyes of the asymmetry of DVD efficacy, associated with the lower oblique hyperfunction DVD patients to provide more effective treatment. METHODS: Eighty patients with hyperfunction who were treated in our hospital from January 2014 to December 2015 were randomly selected and treated with anterior transposition of inferior oblique muscle. Patients were followed up for 1 to 30mo. We compared the vertical incline at the original incline from far(5m, near(33cmdistance and IOOA degree before and after operations, and the correlation between the two. We also compared the vertical incline at the original incline from far(5m, near(33cmdistance and IOOA degree before and after operations in 30 eyes(20 patientswith bilateral asymmetry DVD and IOOA who received unequal inferior oblique transposition. The incidence of antielevation syndrome(AESwas observed after operations. RESULTS: The mean prism diopters(PDat 5m before operations was 19.5±0.15, the average PD after operations was 3.5±0.18, at 5m the original incline was 16±0.21PD. The mean PD at 33cm was 18.6±0.20 before operation, 4.5±0.26 after operations, and 14.1±0.16 at 33cm the original incline, the difference was statistically significant(Pr=0.554, Pr=0.454, P PPCONCLUSION: Anterior transposition of the inferior oblique muscle has a good therapeutic effect on isolated vertical strabismus patients with inferior oblique hyperfunction. While the incidence of postoperative AES is low in patients received unequal inferior oblique muscle transposition.

  15. Analysis of Morphology of Oblique Detonation Wave in H2-Air Mixture%氢-空气斜爆震波的极曲线分析

    Institute of Scientific and Technical Information of China (English)

    伍智超; 郭印诚

    2012-01-01

    本文建立了一种以温度为单变量进行迭代,求解真实气体模型下的斜爆震波波后参数非线性方程组的方法。并通过以加热量和气流偏转角为变量,计算出对应斜爆震波角度和斜爆震波的驻定范围。对于给定的来流条件,基于真实气体模型的斜爆震波的驻定范围比量热完全气体的宽,所以在斜爆震波的计算中必须考虑热物性的影响。随着氢气和空气化学当量比的增加,斜爆震波驻定范围逐步变小。而来流马赫数越大,斜爆震波的驻定范围越大,其CJ爆震波对应的平面偏转角越小。来流初温的升高则使斜爆震波的驻定范围变宽。斜爆震波的驻定需要来流条件与斜面角度等因素的相互匹配。%A numerical method of single variable iteration by temperature for solving nonlinear equations of real gas model was developed. Theoretical analysis gives effect of different heat flux and deflection angles of gas on the angle of oblique detonation wave(ODW). For a given H2-air mixture flow, the standing range of the oblique detonation wave predicted by the real gas model is larger than that by the calorically perfect gas model, this indicates that the thermal property should be considered when calculating an oblique detonation wave. With the equivalence ratio of hydrogen to air increasing, the standing range of the oblique detonation wave is changing small. With the Mach number of oncoming flow increasing, the standing range of the oblique detonation wave increases, and the minimum turning angles of Chapman-Jouguet states decrease. The increased temperature of oncoming flow is beneficial to promote the standing range of the oblique detonation wave. The standing ability of oblique detonation wave relates to the oncoming flow condition and the angle of wedge.

  16. Vertebral Osteotomies in Ankylosing Spondylitis-Comparison of Outcomes Following Closing Wedge Osteotomy versus Opening Wedge Osteotomy: A Systematic Review.

    Science.gov (United States)

    Ravinsky, Robert A; Ouellet, Jean-Albert; Brodt, Erika D; Dettori, Joseph R

    2013-04-01

    Study Design Systematic review. Study Rationale To seek out and assess the best quality evidence available comparing opening wedge osteotomy (OWO) and closing wedge osteotomy (CWO) in patients with ankylosing spondylitis to determine whether their results differ with regard to several different subjective and objective outcome measures. Objective The aim of this study is to determine whether there is a difference in subjective and objective outcomes when comparing CWO and OWO in patients with ankylosing spondylitis suffering from clinically significant thoracolumbar kyphosis with respect to quality-of-life assessments, complication risks, and the amount of correction of the spine achieved at follow-up. Methods A systematic review was undertaken of articles published up to July 2012. Electronic databases and reference lists of key articles were searched to identify studies comparing effectiveness and safety outcomes between adult patients with ankylosing spondylitis who received closing wedge versus opening wedge osteotomies. Studies that included pediatric patients, polysegmental osteotomies, or revision procedures were excluded. Two independent reviewers assessed the strength of evidence using the GRADE criteria and disagreements were resolved by consensus. Results From a total of 67 possible citations, 4 retrospective cohorts (class of evidence III) met our inclusion criteria and form the basis for this report. No differences in Oswestry Disability Index, visual analog scale for pain, Scoliosis Research Society (SRS)-24 score, SRS-22 score, and patient satisfaction were reported between the closing and opening wedge groups across two studies. Regarding radiological outcomes following closing versus opening osteotomies, mean change in sagittal vertical axis ranged from 8.9 to 10.8 cm and 8.0 to 10.9 cm, respectively, across three studies; mean change in lumbar lordosis ranged from 36 to 47 degrees and 19 to 41 degrees across four studies; and mean change

  17. Earthquake occurrence processes in the Indo-Burmese wedge and Sagaing fault region

    Science.gov (United States)

    Kundu, Bhaskar; Gahalaut, V. K.

    2012-02-01

    Earthquakes in the Indo-Burmese wedge and Sagaing fault regions occur in response to the partitioning of the India-Sunda motion along these two distinct boundaries. Under the accretionary wedge of the Indo-Burmese arc, majority of the earthquakes occur in the depth range of 30-60 km and define an eastward gently dipping seismicity trend surface that coincides with the Indian slab. The dip of the slab steepens in the east direction and earthquakes occur down to a depth of 150 km, though the slab can be traced up to the 660 km discontinuity. Although these features are similar to a subduction zone, the nature of the earthquakes and our analysis of their focal mechanisms suggest that these earthquakes are of intra-slab type which occur on steep plane within the Indian plate and the sense of motion implies a northward relative motion with respect to the Sunda plate. Thus these earthquakes and the stress state do not support active subduction across the Indo-Burmese arc which is also consistent with the relative motion of India-Sunda plates. The absence of inter-plate earthquakes, lack of evidence of the occurrence of great earthquakes in the historical records and non-seismogenic nature of the plate interface under the accretionary wedge suggest that seismic hazard due to earthquakes along the plate boundary may be relatively low. However, major intra-slab earthquakes at shallow and intermediate depths may still cause damage in the sediment filled valley regions of Manipur and Cachar in India and Chittagong and Sylhet regions of Bangladesh. In the Sagaing fault region, earthquakes occur through dextral strike slip motion along the north-south oriented plane and the stress state is consistent with the plate motion across the Sagaing fault.

  18. Obliquity-Controlled Water Vapor/Trace Gas Feedback in the Martian Greenhouse Cycle

    Science.gov (United States)

    Mischna, M. A.; Baker, V. R.; Milliken, R.; Richardson, M. I.; Lee, C.

    2013-12-01

    We have explored possible mechanisms for the generation of warm, wet climates on early Mars as a result of greenhouse warming by both water vapor and periodic volcanic trace gas emissions, using the Mars Weather Research and Forecasting (MarsWRF) general circulation model. The presence of both water vapor (a strong greenhouse gas) and other trace greenhouse gases (such as SO2) in a predominantly CO2 atmosphere may act, under certain conditions, to elevate surface temperatures above the freezing point of liquid water, at least episodically. The levels of warming obtained in our simulations do not reach the values seen in Johnson et al., (2008, JGR, 113, E08005), nor are they widespread for extended periods. Rather, warming above 273 K is found in more localized environments and for geologically brief periods of time. Such periodic episodes are controlled by two factors. First is the obliquity of the planet, which plays a significant role is ';activating' extant surface water ice reservoirs, allowing levels of atmospheric water vapor to rise when obliquity is high, and fall precipitously when the obliquity is low. During these low-obliquity periods, the atmosphere is all but incapable of supporting warm surface temperatures except for brief episodes localized wholly in the tropics; thus, there is a natural regulator in the obliquity cycle for maintaining periodic warming. Second is the presence of a secondary trace gas 'trigger', like volcanically released SO2, in the atmosphere. In the absence of such a trace gas, water vapor alone appears incapable of raising temperatures above the melting point; however, by temporarily raising the baseline global temperatures (in the absence of warming by water vapor) by 10-15 K, as with SO2, the trigger gas keeps atmospheric temperatures sufficiently warm, especially during nighttime, to maintain levels of water vapor in the atmosphere that provide the needed warming. Furthermore, we find that global warming can be achieved more

  19. Oblique rifting at Tempe Fossae, Mars

    Science.gov (United States)

    Fernández, Carlos; Anguita, Francisco

    2007-09-01

    This work shows the results of a structural study of the faults observed at the Tempe Rift (northeastern Tharsis region), Mars. A new, detailed map of faults and fault systems was used to geometrically characterize the fracture architecture of the Tempe Rift and to measure fault length, displacement, and spacing data, to analyze the spatial distribution of fault centroids, and to investigate the fractal nature of fault trace maps. A comparison with analog models and the use of conventional techniques of fault population analysis show that the Tempe Rift was most probably generated under sinistral oblique-rifting processes, which highlights the importance of the presence of inherited fractures in the tectonic evolution of the Noachian crust. The angle between the extension direction and the rift axis varies along the Tempe Rift, ranging from 50°-60° at its central southern part to 66°-88° to the southwest. Fault scaling relationships are similar to those found at mid-ocean ridges on Earth with exponential fault length-frequency distributions. Localized, inhomogeneous deformation generated weakly interacting faults, spanning the entire thickness of the mechanical layer. This thickness decreased from southwest to northeast along the rift, along with distance from the central part of the Tharsis dome.

  20. Comparison of clinical and radiological outcomes between opening-wedge and closing-wedge high tibial osteotomy: A comprehensive meta-analysis

    Science.gov (United States)

    Wu, Lingfeng; Lin, Jun; Jin, Zhicheng; Cai, Xiaobin; Gao, Weiyang

    2017-01-01

    High tibial osteotomy (HTO) has been widely used for clinical treatment of osteoarthritis of the medial compartment of the knee, and both opening-wedge and closing-wedge HTO are the most commonly used methods. However, it remains unclear which technique has better clinical and radiological outcomes in practice. To systematically evaluate this issue, we conducted a comprehensive meta-analysis by pooling all available data for the opening-wedge HTO and closing-wedge HTO techniques from the electronic databases including PubMed, Embase, Wed of Science and Cochrane Library. A total of 22 studies encompassing 2582 cases were finally enrolled in the meta-analysis. There was no significant difference regarding surgery time, duration of hospitalization, knee pain VAS, Lysholm score and HSS knee score (clinical outcomes) between the opening-wedge and closing-wedge HTO groups (P > 0.05). However, the opening-wedge HTO group showed wider range of motion than the closing-wedge HTO group (P = 0.003). Moreover, as for Hip-Knee-Ankle angle and mean angle of correction, no significant difference was observed between the opening-wedge and closing-wedge HTO groups (P > 0.05), while the opening-wedge HTO group showed greater posterior tibial slope angle (P < 0.001) and lesser patellar height than the closing-wedge HTO group (P < 0.001). On light of the above analysis, we believe that individualized surgical approach should be introduced based on the clinical characteristics of each patient. PMID:28182736

  1. Camere aeree oblique: sistemi, applicazioni e prospettive future

    Directory of Open Access Journals (Sweden)

    Fabio Remondino

    2014-10-01

    Full Text Available The use of oblique imagery has become a standard for many civil and mapping applications, thanks to the development of airborne digital multi-camera systems, as proposed by many companies. The indisputable virtue of oblique photography lies in its simplicity of interpretation and understanding for inexperienced users allowing their use of oblique images in very different applications, such as building detection and reconstruction, building structural damage classification, road land updating and administration services, etc. We report an overview of the actual oblique commercial systems and the workflow for the automated orientation and dense matching of large image blocks. Perspectives, potentialities, pitfalls and suggestions for achieving satisfactory results are given too.

  2. Characteristics of Dust Plasma Sheath in an Oblique Magnetic Field

    Institute of Scientific and Technical Information of China (English)

    ZOU Xiu

    2006-01-01

    @@ The characteristics of dust plasma sheath in an oblique magnetic field are investigated with a fluid model. Hot electrons, cold ions, neutral particles, and dust grains are taken into account in this system.

  3. Chemonucleolysis technique. New oblique approach requires no measurements.

    Science.gov (United States)

    Romy, M

    1986-01-01

    The author describes a new technique for intradiscal therapy that eliminates the need for measurements. The new technique for entering the lumbar disk for discolysis from the oblique approach is described as simple, accurate and safe.

  4. Effectiveness of oblique section display in thallium-201 myocardial tomography

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, A.R.; Gemmell, H.G.

    1986-08-01

    A simple left ventricle phantom, placed in a water-filled body phantom, has been used to compare the detectability of simulated perfusion defects in short-axis oblique sections with transverse section tomography and conventional planar imaging. Images of the phantom were assessed by five experienced observers and their responses analysed on a lesion-by-lesion basis. No significant difference in defect detectability was found between planar imaging and transverse section tomography. However, following reorientation of the transverse section data into oblique planes perpendicular to the long-axis of the phantom there was a statistically significant increase in defect detectability compared with planar imaging. Observers also detected significantly more defects using oblique section display compared with the original transverse sections. This suggests that reformatting of the transverse sections into oblique planes may be essential to realize the full potential of thallium-201 myocardial tomography.

  5. The Oblique Basis Method from an Engineering Point of View

    Science.gov (United States)

    Gueorguiev, V. G.

    2012-12-01

    The oblique basis method is reviewed from engineering point of view related to vibration and control theory. Examples are used to demonstrate and relate the oblique basis in nuclear physics to the equivalent mathematical problems in vibration theory. The mathematical techniques, such as principal coordinates and root locus, used by vibration and control theory engineers are shown to be relevant to the Richardson - Gaudin pairing-like problems in nuclear physics.

  6. The Oblique Basis Method from an Engineering Point of View

    OpenAIRE

    Gueorguiev, V. G.

    2012-01-01

    The oblique basis method is reviewed from engineering point of view related to vibration and control theory. Examples are used to demonstrate and relate the oblique basis in nuclear physics to the equivalent mathematical problems in vibration theory. The mathematical techniques, such as principal coordinates and root locus, used by vibration and control theory engineers are shown to be relevant to the Richardson - Gaudin pairing-like problems in nuclear physics.

  7. Form Birefringence in Thin Films with Oblique Columnar Structures

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-Guo; SHAO Jian-Da; WANG Su-Mei; HE Hong-Bo; FAN Zheng-Xiu

    2005-01-01

    @@ Effective medium theory is useful for designing optical elements with form birefringent subwavelength structures. Thinfilms fabricated by oblique deposition are similar to the two-dimensional surface relief subwavelength gratings. We use the effective medium theory to calculate the anisotropic optical properties of the thin films with oblique columnar structures. The effective refractive indices and the directions are calculated from effective medium theory. It is shown that optical thin films with predetermined refractive indices and birefringence may be engineered.

  8. Pleistocene Indian Monsoon rainfall variability dominated by obliquity

    Science.gov (United States)

    Gebregiorgis, D.; Hathorne, E. C.; Giosan, L.; Collett, T. S.; Nuernberg, D.; Frank, M.

    2015-12-01

    The past variability of the Indian Monsoon is mostly known from records of wind strength over the Arabian Sea while Quaternary proxy records of Indian monsoon precipitation are still lacking. Here we utilize scanning x-ray fluorescence (XRF) data from a sediment core obtained by the IODP vessel JOIDES Resolution in the Andaman Sea (Site 17) to investigate changes in sediment supply from the peak monsoon precipitation regions to the core site. We use Ti/Ca and K/Rb ratios to trace changes in terrigenous flux and weathering regime, respectively, while Zr/Rb ratios suggest grain size variations. The age model of Site 17 is based on correlation of benthic C. wuellerstorfi/C. mundulus δ18O data to the LR04 global benthic δ18O stack at a resolution of ~3 kyr (Lisiecki and Raymo, 2005) for the last 2 Myrs. In its youngest part the age model is supported by five 14C ages on planktic foraminifera and the youngest Toba ash layer (Ali et al., 2015) resulting in a nearly constant sedimentation rate of ~6.5 cm/kyr. Frequency analysis of the 4 mm resolution Ti/Ca, K/Rb, and Zr/Rb time series using the REDFIT program (Schulz and Mudelsee, 2002), reveals the three main Milankovitch orbital cycles above the 90% confidence level. Depth domain spectral analysis reveals the presence of significant cyclicity at wavelengths of 28.5 and 2.8 m corresponding to the ~400 kyr and ~41 kyr cycles, respectively, during the last 2 Myr. These records suggest that Indian monsoon variability has varied in the obliquity and eccentricity bands, the latter in particular after the mid Pleistocene transition (MPT), while strong precession forcing is lacking in this super-high resolution record. Northern summer insolation and Southern Hemisphere latent heat export are out of phase during precessional cycles, but in phase in the obliquity band, which indicates that Indian monsoon precipitation has likely been more sensitive to both NH pull and SH push mechanisms (Clemens and Prell, 2003). References Ali

  9. Consolidação da osteotomia valgizante proximal da tíbia com cunha de abertura fixada com placa "calço" de Anthony® Proximal tibial valgusing open-wedge osteotomy union fixated with Anthony® "support" plate

    Directory of Open Access Journals (Sweden)

    Cristiano Hossri Ribeiro

    2008-01-01

    Full Text Available OBJETIVO: Este estudo tem por finalidade verificar a consolidação da osteotomia valgizante da tíbia com cunha de abertura fixada com placa tipo calço de Anthony® (OVT, no tratamento da osteoartrose medial do joelho varo, a correção da deformidade e a resposta clínica ao tratamento cirúrgico. MÉTODOS: Vinte pacientes (vinte joelhos com osteoartrose do compartimento medial do joelho, com idade média de 48,4 ± 9,9, foram avaliados por um período mínimo de um ano. Os pacientes foram submetidos a avaliação radiográfica da consolidação e do eixo mecânico no pré e pós operatório, além da avaliação dos critérios de LYSHOLM. RESULTADOS: A consolidação da osteotomia ocorreu após 12 semanas em 100% dos casos sem complicações. A avaliação do LYSHOLM no pós operatório apresentou 80% de excelentes e bons resultados. A correção final média do eixo mecânico foi de 3,4 ± 3,3 graus de valgo. CONCLUSÃO: Concluímos que a consolidação da osteotomia supra-tuberositária da tíbia com cunha de abertura fixada com placa calço de Anthony® e com enxertia óssea tricortical ocorre num intervalo de três meses. A cirurgia é eficaz para a correção da deformidade em varo do joelho, e propicia melhora clínica significante para o paciente.OBJECTIVE: This paper aims to check the proximal tibial valgusing open-wedge osteotomy union with Anthony® plate for the treatment of bowleg with medial osteoarthrosis, final correction of the deformity and clinical improvement. METHODS: Twenty patients (twenty knees with medial osteoarthrosis of the knee, with mean age of 48.4 years, were evaluated for one year. The patients were submitted to the Lysholm's score, and also to X-ray studies before and after surgery. RESULTS: The osteotomy union occurred after 12 weeks in all cases without complications. The Lysholm's score was regarded as excellent or good in 80% of the cases. The postoperative mechanical alignment was 3.4 ± 3.3 valgus

  10. Behavior of obliquely incident vector Bessel beams at planar interfaces.

    Science.gov (United States)

    Salem, Mohamed A; Bağcı, Hakan

    2013-06-01

    We investigate the behavior of full-vector electromagnetic Bessel beams obliquely incident at an interface between two electrically different media. We employ a Fourier transform domain representation of Bessel beams to determine their behavior upon reflection and transmission. This transform, which is geometric in nature, consists of elliptical support curves with complex weighting associated with them. The behavior of the scattered field at an interface is highly complex, owing to its full-vector nature; nevertheless, this behavior has a straightforward representation in the transform domain geometry. The analysis shows that the reflected field forms a different vector Bessel beam, but in general, the transmitted field cannot be represented as a Bessel beam. Nevertheless, using this approach, we demonstrate a method to propagate a Bessel beam in the refractive medium by launching a non-Bessel beam at the interface. Several interesting phenomena related to the behavior of Bessel beams are illustrated, such as polarized reflection at Brewster's angle incidence, and the Goos-Hänchen and Imbert-Federov shifts in the case of total reflection.

  11. Behavior of obliquely incident vector Bessel beams at planar interfaces

    KAUST Repository

    Salem, Mohamed

    2013-01-01

    We investigate the behavior of full-vector electromagnetic Bessel beams obliquely incident at an interface between two electrically different media. We employ a Fourier transform domain representation of Bessel beams to determine their behavior upon reflection and transmission. This transform, which is geometric in nature, consists of elliptical support curves with complex weighting associated with them. The behavior of the scattered field at an interface is highly complex, owing to its full-vector nature; nevertheless, this behavior has a straightforward representation in the transform domain geometry. The analysis shows that the reflected field forms a different vector Bessel beam, but in general, the transmitted field cannot be represented as a Bessel beam. Nevertheless, using this approach, we demonstrate a method to propagate a Bessel beam in the refractive medium by launching a non- Bessel beam at the interface. Several interesting phenomena related to the behavior of Bessel beams are illustrated, such as polarized reflection at Brewster\\'s angle incidence, and the Goos-Hänchen and Imbert-Federov shifts in the case of total reflection. © 2013 Optical Society of America.

  12. Obliquely propagating large amplitude solitary waves in charge neutral plasmas

    Directory of Open Access Journals (Sweden)

    F. Verheest

    2007-01-01

    Full Text Available This paper deals in a consistent way with the implications, for the existence of large amplitude stationary structures in general plasmas, of assuming strict charge neutrality between electrons and ions. With the limit of pair plasmas in mind, electron inertia is retained. Combining in a fluid dynamic treatment the conservation of mass, momentum and energy with strict charge neutrality has indicated that nonlinear solitary waves (as e.g. oscillitons cannot exist in electron-ion plasmas, at no angle of propagation with respect to the static magnetic field. Specifically for oblique propagation, the proof has turned out to be more involved than for parallel or perpendicular modes. The only exception is pair plasmas that are able to support large charge neutral solitons, owing to the high degree of symmetry naturally inherent in such plasmas. The nonexistence, in particular, of oscillitons is attributed to the breakdown of the plasma approximation in dealing with Poisson's law, rather than to relativistic effects. It is hoped that future space observations will allow to discriminate between oscillitons and large wave packets, by focusing on the time variability (or not of the phase, since the amplitude or envelope graphs look very similar.

  13. Three-dimensional frictional plastic strain partitioning during oblique rifting

    Science.gov (United States)

    Duclaux, Guillaume; Huismans, Ritske S.; May, Dave

    2017-04-01

    Throughout the Wilson cycle the obliquity between lithospheric plate motion direction and nascent or existing plate boundaries prompts the development of intricate three-dimensional tectonic systems. Where oblique divergence dominates, as in the vast majority of continental rift and incipient oceanic domains, deformation is typically transtensional and large stretching in the brittle upper crust is primarily achieved by the accumulation of displacement on fault networks of various complexity. In continental rift depressions such faults are initially distributed over tens to hundreds of kilometer-wide regions, which can ultimately stretch and evolve into passive margins. Here, we use high-resolution 3D thermo-mechanical finite element models to investigate the relative timing and distribution of localised frictional plastic deformation in the upper crust during oblique rift development in a simplified layered lithosphere. We vary the orientation of a wide oblique heterogeneous weak zone (representing a pre-existing geologic feature like a past orogenic domain), and test the sensitivity of the shear zones orientation to a range of noise distribution. These models allow us to assess the importance of material heterogeneities for controlling the spatio-temporal shear zones distribution in the upper crust during oblique rifting, and to discuss the underlying controls governing oblique continental breakup.

  14. Transition boundary between regular and Mach reflections for a moving shock interacting with a wedge in inviscid and polytropic air

    Science.gov (United States)

    Hryniewicki, M. K.; Gottlieb, J. J.; Groth, C. P. T.

    2017-07-01

    The transition boundary separating the region of regular reflection from the regions of single-, transitional-, and double-Mach reflections for a planar shock wave moving in air and interacting with an inclined wedge in a shock tube is studied by both analytical methods and computational-fluid-dynamic simulations. The analytical solution for regular reflection and the corresponding solutions from the extreme-angle (detachment), sonic, and mechanical-equilibrium transition criteria by von Neumann (Oblique reflection of shocks, Explosive Research Report No. 12, Navy Department, Bureau of Ordnance, U.S. Dept. Comm. Tech. Serv. No. PB37079 (1943). Also, John von Neumann, Collected Works, Pergamon Press 6, 238-299, 1963) are first revisited and revised. The boundary between regular and Mach reflection is then determined numerically using an advanced computational-fluid-dynamics algorithm to solve Euler's inviscid equations for unsteady motion in two spatial dimensions. This numerical transition boundary is determined by post-processing many closely stationed flow-field simulations, to determine the transition point when the Mach stem of the Mach-reflection pattern just disappears and this pattern then transcends into that of regular reflection. The new numerical transition boundary is shown to agree well with von Neumann's closely spaced sonic and extreme-angle boundaries for weak incident shock Mach numbers from 1.0 to 1.6, but this new boundary trends upward and above von Neumann's sonic and extreme-angle boundaries by a couple of degrees at larger shock Mach numbers from 1.6 to 4.0. Furthermore, the new numerically determined transition boundary is shown to agree well with very few available experimental data obtained from previous experiments designed to reflect two symmetrical moving oblique shock waves along a plane without a shear or boundary layer.

  15. Transition boundary between regular and Mach reflections for a moving shock interacting with a wedge in inviscid and polytropic air

    Science.gov (United States)

    Hryniewicki, M. K.; Gottlieb, J. J.; Groth, C. P. T.

    2016-12-01

    The transition boundary separating the region of regular reflection from the regions of single-, transitional-, and double-Mach reflections for a planar shock wave moving in air and interacting with an inclined wedge in a shock tube is studied by both analytical methods and computational-fluid-dynamic simulations. The analytical solution for regular reflection and the corresponding solutions from the extreme-angle (detachment), sonic, and mechanical-equilibrium transition criteria by von Neumann (Oblique reflection of shocks, Explosive Research Report No. 12, Navy Department, Bureau of Ordnance, U.S. Dept. Comm. Tech. Serv. No. PB37079 (1943). Also, John von Neumann, Collected Works, Pergamon Press 6, 238-299, 1963) are first revisited and revised. The boundary between regular and Mach reflection is then determined numerically using an advanced computational-fluid-dynamics algorithm to solve Euler's inviscid equations for unsteady motion in two spatial dimensions. This numerical transition boundary is determined by post-processing many closely stationed flow-field simulations, to determine the transition point when the Mach stem of the Mach-reflection pattern just disappears and this pattern then transcends into that of regular reflection. The new numerical transition boundary is shown to agree well with von Neumann's closely spaced sonic and extreme-angle boundaries for weak incident shock Mach numbers from 1.0 to 1.6, but this new boundary trends upward and above von Neumann's sonic and extreme-angle boundaries by a couple of degrees at larger shock Mach numbers from 1.6 to 4.0. Furthermore, the new numerically determined transition boundary is shown to agree well with very few available experimental data obtained from previous experiments designed to reflect two symmetrical moving oblique shock waves along a plane without a shear or boundary layer.

  16. Tidal evolution of the Moon from a high-obliquity, high-angular-momentum Earth

    Science.gov (United States)

    Ćuk, Matija; Hamilton, Douglas P.; Lock, Simon J.; Stewart, Sarah T.

    2016-11-01

    In the giant-impact hypothesis for lunar origin, the Moon accreted from an equatorial circum-terrestrial disk; however, the current lunar orbital inclination of five degrees requires a subsequent dynamical process that is still unclear. In addition, the giant-impact theory has been challenged by the Moon’s unexpectedly Earth-like isotopic composition. Here we show that tidal dissipation due to lunar obliquity was an important effect during the Moon’s tidal evolution, and the lunar inclination in the past must have been very large, defying theoretical explanations. We present a tidal evolution model starting with the Moon in an equatorial orbit around an initially fast-spinning, high-obliquity Earth, which is a probable outcome of giant impacts. Using numerical modelling, we show that the solar perturbations on the Moon’s orbit naturally induce a large lunar inclination and remove angular momentum from the Earth-Moon system. Our tidal evolution model supports recent high-angular-momentum, giant-impact scenarios to explain the Moon’s isotopic composition and provides a new pathway to reach Earth’s climatically favourable low obliquity.

  17. Tidal evolution of the Moon from a high-obliquity, high-angular-momentum Earth.

    Science.gov (United States)

    Ćuk, Matija; Hamilton, Douglas P; Lock, Simon J; Stewart, Sarah T

    2016-11-17

    In the giant-impact hypothesis for lunar origin, the Moon accreted from an equatorial circum-terrestrial disk; however, the current lunar orbital inclination of five degrees requires a subsequent dynamical process that is still unclear. In addition, the giant-impact theory has been challenged by the Moon's unexpectedly Earth-like isotopic composition. Here we show that tidal dissipation due to lunar obliquity was an important effect during the Moon's tidal evolution, and the lunar inclination in the past must have been very large, defying theoretical explanations. We present a tidal evolution model starting with the Moon in an equatorial orbit around an initially fast-spinning, high-obliquity Earth, which is a probable outcome of giant impacts. Using numerical modelling, we show that the solar perturbations on the Moon's orbit naturally induce a large lunar inclination and remove angular momentum from the Earth-Moon system. Our tidal evolution model supports recent high-angular-momentum, giant-impact scenarios to explain the Moon's isotopic composition and provides a new pathway to reach Earth's climatically favourable low obliquity.

  18. New machining and testing method of large angle infrared wedge mirror parts

    Science.gov (United States)

    Su, Ying; Guo, Rui; Zhang, Fumei; Zhang, Zheng; Liu, Xuanmin; Zengqi, Xu; Li, Wenting; Zhang, Feng

    2016-10-01

    Large angle wedge parts were widely used in the optical system that was used for achieving a wide range of scanning. Due to the parts having the characteristic of large difference in the thickness of both ends and high density, the accuracy of the wedge angle was hard to ensure to reach second level in optical processing. Generally, wedge mirror angle was measured by contact comparison method which was easy to damage the surface. In view of the existence of two practical problems, in this paper, based on theoretical analysis, by taking three key measures that were the accurate positioning for the central position of the large angle wedge part, the accuracy control of angle precision machined of wedge mirror and fast and non destructive laser assisted absolute measurement of large angle wedge, the qualified rate of parts were increased to 100%, a feasible, controllable and efficient process route for large angle infrared wedge parts was found out.

  19. Aerial Photography and Imagery, Oblique, Pictometry Oblique Imagery for the 10-County Atlanta Regional Commission Region, Published in 2007, Atlanta Regional Commission.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Aerial Photography and Imagery, Oblique dataset, was produced all or in part from Other information as of 2007. It is described as 'Pictometry Oblique Imagery...

  20. Electrodynamic Casimir Effect in a Medium-Filled Wedge II

    CERN Document Server

    Ellingsen, Simen Adnoy; Milton, Kimball A

    2009-01-01

    We consider the Casimir energy in a geometry of an infinite magnetodielectric wedge closed by a circularly cylindrical arc embedded in another magnetodielectric medium, under the condition that the speed of light be the same in both media. An expression for the Casimir energy corresponding to the arc is obtained and it is found that in the limit where the reflectivity of the boundaries tends to unity the finite part of the Casimir energy of a perfectly conducting wedge-shaped sheet closed by a circular cylinder is regained. The energy of the latter geometry possesses divergences due to the presence of sharp corners. We argue how this is a pathology of the assumption of ideal conductor boundaries, and that no analogous term enters in the present geometry.

  1. MHD Casson nanofluid flow past a wedge with Newtonian heating

    Science.gov (United States)

    Ahmad, Kartini; Hanouf, Zahir; Ishak, Anuar

    2017-02-01

    The problem of steady Casson nanofluid flow past a wedge is studied in this paper. The presence of magnetic field along with Newtonian heating at the surface is considered. The governing partial differential equations are first transformed into a set of nonlinear ordinary differential equations by similarity transformations, before being solved numerically using the Keller-box method. The effects of the wedge angle Ω from 0° (horizontal plate) to 180° (vertical plate) as well as of as the magnetic parameter M on the non-Newtonian fluid flow and heat transfer characteristics are investigated. It is found that the surface temperature is slightly higher for the flow over a horizontal plate compared to that over a vertical plate. It is also found that the magnetic field decreases the surface temperature but increases the skin friction. The flow of a Newtonian fluid is found to give higher skin friction as compared to that of Casson fluid.

  2. Wedge Diffraction as an Instance of Radiative Shielding

    CERN Document Server

    Grzesik, J A

    2016-01-01

    The celebrated Sommerfeld wedge diffraction solution is reexamined from a null interior field perspective. Exact surface currents provided by that solution, when considered as disembodied half-plane laminae radiating into an ambient, uniform space both inside and outside the wedge proper, do succeed in reconstituting both a specular, mirror field above the exposed face, and a shielding plane-wave field of a sign opposite to that of the incoming excitation which, under superposition, creates both the classical, geometric-optics shadow, and a strictly null interior field at the dominant, plane-wave level. Both mirror and shadow radiated fields are controlled by the residue at just one simple pole encountered during a spectral radiative field assembly, fixed in place by incidence direction $\\phi_{0}$ as measured from the exposed face. The radiated fields further provide diffractive contributions drawn from two saddle points that track observation angle $\\phi.$ Even these, more or less asymptotic contributions, a...

  3. Direct FVM Simulation for Sound Propagation in an Ideal Wedge

    Directory of Open Access Journals (Sweden)

    Hongyu Ji

    2016-01-01

    Full Text Available The sound propagation in a wedge-shaped waveguide with perfectly reflecting boundaries is one of the few range-dependent problems with an analytical solution. This provides a benchmark for the theoretical and computational studies on the simulation of ocean acoustic applications. We present a direct finite volume method (FVM simulation for the ideal wedge problem, and both time and frequency domain results are analyzed. We also study the broadband problem with large-scale parallel simulations. The results presented in this paper validate the accuracy of the numerical techniques and show that the direct FVM simulation could be applied to large-scale complex acoustic applications with a high performance computing platform.

  4. Wedge Splitting Test and Fracture Energy on Particulate Reinforced Composites

    Energy Technology Data Exchange (ETDEWEB)

    Na, Seong Hyeon; Kim, Jae Hoon; Choi, Hoon Seok [Chungnam National Univ., Daejeon (Korea, Republic of); Park, Jae Beom; Kim, Shin Hoe; Jung, Gyoo Dong [Agency for Defense Developmen, Daejeon (Korea, Republic of)

    2016-03-15

    The effect of temperature on the fracture energy, crack propagation, and crack tip opening displacement(CTOD) was determined for particulate reinforced composites using the wedge splitting test. The materials that were used consisted of a polymer binder, an oxidizing agent, and aluminum particles. The test rate of the wedge splitting specimen was 50 mm/min, the temperature conditions were 50℃, room temperature, -40℃, and -60℃. The fracture energy, calculated from splitting load-crack mouth opening displacement(CMOD) curves, increased with decreasing temperature from 50℃ to -40℃. In addition, the strength of the particulate reinforced composites increased sharply at -60℃, and the composites evidenced brittle fracture due to the glass transition temperature. The strain fields near the crack tip were analyzed using digital image correlation.

  5. Modal Analysis in Lined Wedge-Shaped Ducts

    Science.gov (United States)

    Mechel, F. P.

    1998-10-01

    It has been suggested to describe the sound field in a wedge-shaped duct in a cylindrical co-ordinate system in which the boundaries of the wedge lie in a co-ordinate surface. This suggestion was developed in a companion paper [1]. The wave equation can be separated only if the boundaries are ideally reflecting (rigid or soft). Two solutions were proposed in reference [1] for absorbing boundaries. In the first solution the sound field is composed of “ideal modes” (modes in a wedge with ideally reflecting boundaries); the boundary condition at the absorbing boundary then leads to a system of equations for the mode amplitudes. The problem with this method lies in the fact that there is no radial orthogonality of the ideal modes so that the precision of the field synthesis by ideal modes is doubtful. In the second method in reference [1] one defines “fictitious modes” which satisfy the boundary conditions at the flanks exactly and which are based on hypergeometric functions as radial functions, but which produce a “rest” in the wave equation. It was described how this rest can be minimized; this procedure leads to slow numerical integrations. In the present paper, the wedge is subdivided into duct sections with parallel walls (the boundary is stepped); the fields in the sections are composed of duct modes (modes in a straight lined duct); the mode amplitudes are determined from the boundary conditions at the section limits. The advantages of the present method are (analytically) the duct modes are orthogonal across the sections, so the mode amplitudes can be determined with the usual precision of a modal analysis, and (numerically) no numerical integrations are needed.

  6. Large scale test of wedge shaped micro strip gas counters

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M.; Atz, S.; Aulchenko, V.; Bachmann, S.; Baiboussinov, B.; Barthe, S.; Beaumont, W.; Beckers, T.; Beissel, F.; Benhammou, Y.; Bergdolt, A.M.; Bernier, K.; Bluem, P.; Bondar, A.; Bouhali, O.; Boulogne, I.; Bozzo, M.; Brom, J.M.; Camps, C.; Chorowicz, V.; Coffin, J.; Commichau, V.; Contardo, D.; Croix, J.; Troy, J. de; Drouhin, F.; Eberle, H.; Fluegge, G.; Fontaine, J.-C.; Geist, W.; Goerlach, U.; Gundlfinger, K.; Hangarter, K.; Haroutunian, R.; Helleboid, J.M.; Henkes, Th.; Hoffer, M.; Hoffman, C.; Huss, D.; Ischebeck, R.; Jeanneau, F.; Juillot, P.; Junghans, S.; Kapp, M.R.; Kaercher, K.; Knoblauch, D.; Kraeber, M.; Krauth, M.; Kremp, J.; Lounis, A.; Luebelsmeyer, K.; Maazouzi, C.; Macke, D.; Metri, R.; Mirabito, L.; Mueller, Th.; Nagaslaev, V.; Neuberger, D.; Nowack, A.; Pallares, A.; Pandoulas, D.; Petertill, M.; Pooth, O.; Racca, C.; Ripp, I.; Ruoff, E.; Sauer, A.; Schmitz, P.; Schulte, R.; Schultz von Dratzig, A.; Schunk, J.P.; Schuster, G.; Schwaller, B.; Shektman, L.; Siedling, R.; Sigward, M.H.; Simonis, H.J.; Smadja, G.; Stefanescu, J.; Szczesny, H.; Tatarinov, A.; Thuemmel, W.H.; Tissot, S.; Titov, V.; Todorov, T.; Tonutti, M.; Udo, F.; Velde, C. Vander. E-mail: vandervelde@hep.iihe.ac.be; Doninck, W. van; Dyck, Ch. van; Vanlaer, P.; Lancker, L. van; Verdini, P.G.; Weseler, S.; Wittmer, B.; Wortmann, R.; Zghiche, A.; Zhukov, V

    1999-11-01

    In order to check the system aspects of the forward-backward MSGC tracker designed for the future CMS experiment at LHC, 38 trapezoidal MSGC counters assembled in six multi-substrates detector modules were built and exposed to a muon beam at the CERN SPS. Results on the gain uniformity along the wedge-shaped strip pattern and across the detector modules are shown together with measurements of the detection efficiency and the spatial resolution.

  7. Large scale test of wedge shaped micro strip gas counters

    CERN Document Server

    Ackermann, M; Aulchenko, V M; Bachmann, S; Baibusinov, B O; Barthe, S; Beaumont, W; Beckers, T; Beissel, F; Benhammou, Ya; Bergdolt, A M; Bernier, K; Blüm, H P; Bondar, A E; Bouhali, O; Boulogne, I; Bozzo, M; Brom, J M; Camps, C; Chorowicz, V; Coffin, J P; Commichau, V; Contardo, D; Croix, J; De Troy, J G; Drouhin, F; Eberle, H; Flügge, G; Fontaine, J C; Geist, Walter M; Goerlach, U; Gundlfinger, K; Hangarter, K; Haroutunian, R; Helleboid, J M; Henkes, T; Hoffer, M; Hoffmann, C; Huss, D; Ischebeck, R; Jeanneau, F; Juillot, P; Junghans, S; Kapp, M R; Kärcher, K; Knoblauch, D; Kräber, M H; Krauth, M; Kremp, J; Lounis, A; Lübelsmeyer, K; Maazouzi, C; Macke, D; Metri, R; Mirabito, L; Müller, T; Nagaslaev, V; Neuberger, D; Nowak, A; Pallarès, A; Pandoulas, D; Petertill, M; Pooth, O; Racca, C; Ripp, I; Ruoff, E; Sauer, A; Schmitz, P; Schulte, R; Schultz von Dratzig, A; Schunk, J P; Schuster, G; Schwaller, B; Shekhtman, L I; Siedling, R; Sigward, M H; Simonis, H J; Smadja, G; Stefanescu, J; Szczesny, H; Tatarinov, A A; Thümmel, W H; Tissot, S; Titov, V; Todorov, T; Tonutti, M; Udo, Fred; Van der Velde, C; Van Doninck, W K; Van Dyck, C; Vanlaer, P; Van Lancker, L; Verdini, P G; Weseler, S; Wittmer, B; Wortmann, R; Zghiche, A; Zhukov, V

    1999-01-01

    In order to check the system aspects of the forward-backward MSGC tracker designed for the future CMS experiment at LHC, 38 trapezoidal MSGC counters assembled in six multi-substrates detector modules were built and exposed to a muon beam at the CERN SPS. Results on the gain uniformity along the wedge-shaped strip pattern and across the detector modules are shown together with measurements of the detection efficiency and the spatial resolution. (8 refs).

  8. DNS of compressible turbulent boundary layer over a blunt wedge

    Institute of Scientific and Technical Information of China (English)

    LI Xinliang; FU Dexun; MA Yanwan

    2005-01-01

    Direct numerical simulation of spatially evolving compressible boundary layer over a blunt wedge is performed in this paper. The free-stream Mach number is 6 and the disturbance source produced by wall blowing and suction is located downstream of the sound-speed point. Statistics are studied and compared with the results in incompressible flat-plate boundary layer. The mean pressure gradient effects on the vortex structure are studied.

  9. Water-saturated physical modeling of accretionary wedges

    Science.gov (United States)

    Yamada, Y.; Zhang, M.; Nakajima, H.; Driss, E.

    2005-12-01

    Accretionary wedges have been an important research target from view points of earthquake mechanism at the subduction zone, sediment deformation that is closely coupled with hydrology, and resource exploration such as methane hydrates. The knowledge obtained from the study may also be useful for site selection of geological disposal of hazardous materials including radioactive nuclear wastes, in coastal areas of tectonically unstable island arc systems like Japan. The wedges have been well-investigated with analogue models in particular sandbox experiments that typically use dry granular materials, thus the inter-granular pore space of the sandbox experiments is filled with air. In natural sediments, however, the pore space is filled with formation water and its pressure has special effects on structural development. In order to accurately simulate the in-situ conditions and to examine the effects of water on the deformation process of accretionary wedge, a new apparatus was recently constructed in AIST, Japan, to perform physical analog experiments of accretionary wedges under water-saturated condition. For comparisons, equivalent experiments with dry materials were also conducted. The physical properties of the materials were also measured with tri-axial compression tests to interpret the experimental observations. Preliminary results obtained from this study showed that the fundamental parameters on structural geometry, such as taper angle and fault spacing, can be correlated well in wet and dry experiments. These are also in good agreement with physical properties obtained by the tri-axial compression tests, suggesting that the internal friction coefficient decreases as the overburden pressure increases. In the under water models, buoyancy decreases apparent grain density and overburden pressure thus the internal friction coefficient also decreases. This also agrees with the structural geometry of the experimental results. These results suggest that under

  10. Wedge-local quantum fields on a nonconstant noncommutative spacetime

    Energy Technology Data Exchange (ETDEWEB)

    Much, A. [Max-Planck-Institute for Mathematics in the Sciences, 04103 Leipzig (Germany) and Institute for Theoretical Physics, University of Leipzig, 04009 Leipzig (Germany)

    2012-08-15

    Within the framework of warped convolutions we deform the massless free scalar field. The deformation is performed by using the generators of the special conformal transformations. The investigation shows that the deformed field turns out to be wedge-local. Furthermore, it is shown that the spacetime induced by the deformation with the special conformal operators is nonconstant noncommutative. The noncommutativity is obtained by calculating the deformed commutator of the coordinates.

  11. Wave dynamic processes in cellular detonation reflection from wedges

    Institute of Scientific and Technical Information of China (English)

    Zongmin Hu; Zonglin Jiang

    2007-01-01

    When the cell width of the incident deto-nation wave (IDW) is comparable to or larger than theMach stem height,self-similarity will fail during IDWreflection from a wedge surface.In this paper,the det-onation reflection from wedges is investigated for thewave dynamic processes occurring in the wave front,including transverse shock motion and detonation cellvariations behind the Mach stem.A detailed reactionmodel is implemented to simulate two-dimensional cel-lular detonations in stoichiometric mixtures of H2/O2diluted by Argon.The numerical results show that thetransverse waves,which cross the triple point trajec-tory of Mach reflection,travel along the Mach stem andreflect back from the wedge surface,control the size ofthe cells in the region swept by the Mach stem.It is theenergy carried by these transverse waves that sustainsthe triple-wave-collision with a higher frequency withinthe over-driven Mach stem.In some cases,local wavedynamic processes and wave structures play a dominantrole in determining the pattern of cellular record,lead-ing to the fact that the cellular patterns after the Machstem exhibit some peculiar modes.

  12. A Rotating Pendulum Linked by an Oblique Spring

    Institute of Scientific and Technical Information of China (English)

    CAO Qing-Jie; HAN Ning; TIAN Rui-Lan

    2011-01-01

    @@ We present a novel model which comprises a rotating pendulum linked by an oblique spring pinned to its rigid support.This model provides a cylindrical dynamical system with both smooth and discontinuous regimes depending on the value of a system parameter and also the dynamics transient relying on the coupling strength between the pendulum and the linked spring.The presented system behaves with both standard (smooth) and nonstandard (discontinuous) nonlinear dynamics of equilibrium bifurcations and the periodic patterns when it is unperturbed.Complicated resonant structures of period, quasi-period and stochastic phenomena are presented for the system with unique harmonic perturbation.The chaotic behavior of the system perturbed by both viscous-damping and external excitations is aiso demonstrated.%H'f present ;I novel model wbkh compriaes n rotating pendulum liiiknl by as oblbpie spring pinned to its rigid .support. This model provides n ryliiulncal dynamical system with both smooth and discontinuous regimes depending an the ralue of a Obtsm parameter and afao the dyaamka transient relying on the coupling strength between thependohm ?nd tiefMed spring. The presented m>1'-:I; bOami nii/I Wh standanJ (sanootij mid iHWsrondard frfi> rt.nr in no u, I imn/iucaj- rfvnamics of equilibrium MhmtWM and t&s partodlc palbtros wlien I( is uoperturbod. Omt/ifjcatcci rraonam rtrucniros of period, qiia-si-fn-rn-) mri rtedastfe pljpjioiiicua are presented for iJje s.vsteni ivitli tmfqtB! U,irmonic pemirbMiiin. The chai/tk bcAavftn ctf lln- m-I'iii perturbed by huth iriBcous-dampbig ,-wd external excitsttois is a&o Jumom,irHtnl.

  13. Robustness of oscillatory α2 dynamos in spherical wedges

    Science.gov (United States)

    Cole, E.; Brandenburg, A.; Käpylä, P. J.; Käpylä, M. J.

    2016-10-01

    Context. Large-scale dynamo simulations are sometimes confined to spherical wedge geometries by imposing artificial boundary conditions at high latitudes. This may lead to spatio-temporal behaviours that are not representative of those in full spherical shells. Aims: We study the connection between spherical wedge and full spherical shell geometries using simple mean-field dynamos. Methods: We solve the equations for one-dimensional time-dependent α2 and α2Ω mean-field dynamos with only latitudinal extent to examine the effects of varying the polar angle θ0 between the latitudinal boundaries and the poles in spherical coordinates. Results: In the case of constant α and ηt profiles, we find oscillatory solutions only with the commonly used perfect conductor boundary condition in a wedge geometry, while for full spheres all boundary conditions produce stationary solutions, indicating that perfect conductor conditions lead to unphysical solutions in such a wedge setup. To search for configurations in which this problem can be alleviated we choose a profile of the turbulent magnetic diffusivity that decreases toward the poles, corresponding to high conductivity there. Oscillatory solutions are now achieved with models extending to the poles, but the magnetic field is strongly concentrated near the poles and the oscillation period is very long. By changing both the turbulent magnetic diffusivity and α profiles so that both effects are more concentrated toward the equator, we see oscillatory dynamos with equatorward drift, shorter cycles, and magnetic fields distributed over a wider range of latitudes. Those profiles thus remove the sensitive and unphysical dependence on θ0. When introducing radial shear, we again see oscillatory dynamos, and the direction of drift follows the Parker-Yoshimura rule. Conclusions: A reduced α effect near the poles with a turbulent diffusivity concentrated toward the equator yields oscillatory dynamos with equatorward migration and

  14. Chronology and palaeoenvironmental implications of the ice-wedge pseudomorphs and composite-wedge casts on the Magdalen Islands (eastern Canada)

    DEFF Research Database (Denmark)

    Remillard, A.M.; Hetu, B.; Bernatchez, P.

    2015-01-01

    The Magdalen Islands are a valuable terrestrial record, evidencing the complex glacial and periglacial history of the Gulf of St. Lawrence. Thirteen structures interpreted as ice-wedge pseudomorphs or composite-wedge casts were observed at four sites on the southern Magdalen Islands and testify...

  15. Assessment of computerized treatment planning system accuracy in calculating wedge factors of physical wedged fields for 6 MV photon beams.

    Science.gov (United States)

    Muhammad, Wazir; Maqbool, Muhammad; Shahid, Muhammad; Hussain, Amjad; Tahir, Sajjad; Matiullah; Rooh, Gul; Ahmad, Tanveer; Lee, Sang Hoon

    2011-07-01

    Wedge filters are commonly used in external beam radiotherapy to achieve a uniform dose distribution within the target volume. The main objective of this study was to investigate the accuracy of the beam modifier algorithm of Theraplan plus (TPP version 3.8) treatment planning system and to confirm that either the beam hardening, beam softening and attenuation coefficients along with wedge geometry and measured wedge factor at single depth and multiple fields sizes can be the replacement of wedged profile and wedged cross-sectional data or not. In this regard the effect of beam hardening and beam softening was studied with physical wedges for 6 MV photons. The Normalized Wedge Factors (NWFs) were measured experimentally as well as calculated with the Theraplan plus, as a function of depth and field size in a water phantom for 15°, 30°, 45°, and 60° wedge filters. The beam hardening and softening was determined experimentally by deriving the required coefficients for all wedge angles. The TPP version 3.8 requires wedge transmission factor at single depth and multiple field sizes. Without incorporating the hardening and softening coefficients the percent difference between measured and calculated NFWs was as high as 7%. After the introduction of these parameters into the algorithm, the agreement between measured and TPP (V 3.8) calculated NWFs were improved to within 2 percent for various depths. Similar improvement was observed in TPP version 3.8 while calculating NWFs for various field sizes when the required coefficients were adjusted. In conclusion, the dose calculation algorithm of TPP version 3.8 showed good accuracy for a 6 MV photon beam provided beam hardening and softening parameters are taken into account. From the results, it is also concluded that, the beam hardening, beam softening and attenuation coefficients along with wedge geometry and measured wedge factor at single depth and multiple fields sizes can be the replacement of wedged profile and

  16. Observation of wedge waves and their mode transformation by laser ultrasonic technique

    Institute of Scientific and Technical Information of China (English)

    Jing Jia; Zhonghua Shen; Lijuan Wang; Ling Yuan

    2011-01-01

    Wedge waves (WWs) in wedges, including their dispersion characteristics and mode transformation, are investigated using the laser ultrasound technique. Pulsed laser excitation and optical deflection beam method for detection are used to record WWs. Numerous WWs are detected by scanning the excitation laser along the wedge tip. Dispersions of WWs are obtained by using the two-dimensional (2D) Fourier transformation method, and different WW orders are revealed on the wedges. Mode transformation is determined by fixing the distance between the excitation and detection position, as well as by scanning the samples along the normal direction of the wedge tip.%@@ Wedge waves (WWs) in wedges, including their dispersion characteristics and mode transformation, are investigated using the laser ultrasound technique. Pulsed laser excitation and optical deflection beam method for detection are used to record WWs. Numerous WWs are detected by scanning the excitation laser along the wedge tip. Dispersions of WWs are obtained by using the two-dimensional (2D) Fourier transformation method, and different WW orders are revealed on the wedges. Mode transformation is determined by fixing the distance between the excitation and detection position, as well as by scanning the samples along the normal direction of the wedge tip.

  17. Use of Vertical Aerial Images for Semi-Oblique Mapping

    Science.gov (United States)

    Poli, D.; Moe, K.; Legat, K.; Toschi, I.; Lago, F.; Remondino, F.

    2017-05-01

    The paper proposes a methodology for the use of the oblique sections of images from large-format photogrammetric cameras, by exploiting the effect of the central perspective geometry in the lateral parts of the nadir images ("semi-oblique" images). The point of origin of the investigation was the execution of a photogrammetric flight over Norcia (Italy), which was seriously damaged after the earthquake of 30/10/2016. Contrary to the original plan of oblique acquisitions, the flight was executed on 15/11/2017 using an UltraCam Eagle camera with focal length 80 mm, and combining two flight plans, rotated by 90º ("crisscross" flight). The images (GSD 5 cm) were used to extract a 2.5D DSM cloud, sampled to a XY-grid size of 2 GSD, a 3D point clouds with a mean spatial resolution of 1 GSD and a 3D mesh model at a resolution of 10 cm of the historic centre of Norcia for a quantitative assessment of the damages. From the acquired nadir images the "semi-oblique" images (forward, backward, left and right views) could be extracted and processed in a modified version of GEOBLY software for measurements and restitution purposes. The potential of such semi-oblique image acquisitions from nadir-view cameras is hereafter shown and commented.

  18. Inferior oblique muscle paresis as a sign of myasthenia gravis.

    Science.gov (United States)

    Almog, Yehoshua; Ben-David, Merav; Nemet, Arie Y

    2016-03-01

    Myasthenia gravis may affect any of the six extra-ocular muscles, masquerading as any type of ocular motor pathology. The frequency of involvement of each muscle is not well established in the medical literature. This study was designed to determine whether a specific muscle or combination of muscles tends to be predominantly affected. This retrospective review included 30 patients with a clinical diagnosis of myasthenia gravis who had extra-ocular muscle involvement with diplopia at presentation. The diagnosis was confirmed by at least one of the following tests: Tensilon test, acetylcholine receptor antibodies, thymoma on chest CT scan, or suggestive electromyography. Frequency of involvement of each muscle in this cohort was inferior oblique 19 (63.3%), lateral rectus nine (30%), superior rectus four (13.3%), inferior rectus six (20%), medial rectus four (13.3%), and superior oblique three (10%). The inferior oblique was involved more often than any other muscle (pmyasthenia gravis can be difficult, because the disease may mimic every pupil-sparing pattern of ocular misalignment. In addition diplopia caused by paresis of the inferior oblique muscle is rarely encountered (other than as a part of oculomotor nerve palsy). Hence, when a patient presents with vertical diplopia resulting from an isolated inferior oblique palsy, myasthenic etiology should be highly suspected.

  19. Obliquity pacing of the late Pleistocene glacial terminations.

    Science.gov (United States)

    Huybers, Peter; Wunsch, Carl

    2005-03-24

    The 100,000-year timescale in the glacial/interglacial cycles of the late Pleistocene epoch (the past approximately 700,000 years) is commonly attributed to control by variations in the Earth's orbit. This hypothesis has inspired models that depend on the Earth's obliquity (approximately 40,000 yr; approximately 40 kyr), orbital eccentricity (approximately 100 kyr) and precessional (approximately 20 kyr) fluctuations, with the emphasis usually on eccentricity and precessional forcing. According to a contrasting hypothesis, the glacial cycles arise primarily because of random internal climate variability. Taking these two perspectives together, there are currently more than thirty different models of the seven late-Pleistocene glacial cycles. Here we present a statistical test of the orbital forcing hypothesis, focusing on the rapid deglaciation events known as terminations. According to our analysis, the null hypothesis that glacial terminations are independent of obliquity can be rejected at the 5% significance level, whereas the corresponding null hypotheses for eccentricity and precession cannot be rejected. The simplest inference consistent with the test results is that the ice sheets terminated every second or third obliquity cycle at times of high obliquity, similar to the original proposal by Milankovitch. We also present simple stochastic and deterministic models that describe the timing of the late-Pleistocene glacial terminations purely in terms of obliquity forcing.

  20. A Quick and Affine Invariance Matching Method for Oblique Images

    Directory of Open Access Journals (Sweden)

    XIAO Xiongwu

    2015-04-01

    Full Text Available This paper proposed a quick, affine invariance matching method for oblique images. It calculated the initial affine matrix by making full use of the two estimated camera axis orientation parameters of an oblique image, then recovered the oblique image to a rectified image by doing the inverse affine transform, and left over by the SIFT method. We used the nearest neighbor distance ratio(NNDR, normalized cross correlation(NCC measure constraints and consistency check to get the coarse matches, then used RANSAC method to calculate the fundamental matrix and the homography matrix. And we got the matches that they were interior points when calculating the homography matrix, then calculated the average value of the matches' principal direction differences. During the matching process, we got the initial matching features by the nearest neighbor(NN matching strategy, then used the epipolar constrains, homography constrains, NCC measure constrains and consistency check of the initial matches' principal direction differences with the calculated average value of the interior matches' principal direction differences to eliminate false matches. Experiments conducted on three pairs of typical oblique images demonstrate that our method takes about the same time as SIFT to match a pair of oblique images with a plenty of corresponding points distributed evenly and an extremely low mismatching rate.

  1. OBLIQUE PROJECTION REALIZATION OF A KERNEL-BASED NONLINEAR DISCRIMINATOR

    Institute of Scientific and Technical Information of China (English)

    Liu Benyong; Zhang Jing

    2006-01-01

    Previously, a novel classifier called Kernel-based Nonlinear Discriminator (KND) was proposed to discriminate a pattern class from other classes by minimizing mean effect of the latter. To consider the effect of the target class, this paper introduces an oblique projection algorithm to determine the coefficients of a KND so that it is extended to a new version called extended KND (eKND). In eKND construction, the desired output vector of the target class is obliquely projected onto the relevant subspace along the subspace related to other classes. In addition, a simple technique is proposed to calculate the associated oblique projection operator. Experimental results on handwritten digit recognition show that the algorithm performes better than a KND classifier and some other commonly used classifiers.

  2. Research On The Measure Method Of Oblique Pinhole Parameters

    Directory of Open Access Journals (Sweden)

    Ma Yu-Zhen

    2016-01-01

    Full Text Available There are many special advantages in measuring the diameter of blind and deep holes with a capacitive probe, there are still some challenges for the measurement of a oblique pinhole parameters because the measuring device is inconvenient to stretch into the oblique pinhole exactly. A five-dimensional measurement system was adopted in the paper which included a capacitive sensor probe and a three-coordinate measuring machine to accomplish the measurement for oblique pinholes. With the help of the three-dimensional coordinates measured from the pinhole axis, we put forward a comprehensive method of combining the projection method and the least squares method together for fitting spatial straight line to obtain the optimal equation of the spacial axis. Finally, a reliable and entire measurement system was set up.

  3. Chaotic obliquity and the nature of the Martian climate

    Science.gov (United States)

    Jakosky, Bruce M.; Henderson, Bradley G.; Mellon, Michael T.

    1995-01-01

    Recent calculations of the Martian obliquity suggests that it varies chaotically on timescales longer than about 10(exp 7) years and varies between about 0 and 60 deg. We examine the seasonal water behavior at obliquities between 40 and 60 deg. Up to several tens of centimeters of water may sublime from the polar caps each year, and possibly move to the equator, where it is more stable. The CO2 frost and CO2-H2O clathrate hydrate are stable in thepolar deposits below a few tens of meters depth, so that the polar cap could contain a significant CO2 reservoir. If CO2 is present, it could be left over from the early history of Mars; also, it could be released into the atmosphere during periods of high obliquity, causing occasional periods of more-clement climate.

  4. Numerical modelling of steel tubes under oblique crushing forces

    Science.gov (United States)

    Ismail, A. E.; Rahman, M. Q. Abdul; Nezere, N.; Jamian, S.; Kamarudin, K. A.; Awang, M. K.; Nor, M. K. Mohd; Ibrahim, M. N.; Rasidi Ibrahim, M.; Zulafif Rahim, M.; Fahrul Hassan, Mohd; Nor, Nik Hisyamudin Muhd; Arifin, A. M. T.; Zaini Yunos, Muhamad

    2017-08-01

    This paper presents the numerical assessment of crushing responses of elliptical tubes under crushing forces. Based on the literature survey, tremendous amount of works on the axial crushing behaviour can be found. However, the studies on the oblique crushing responses are rarely found. Therefore, this work investigates numerically the elliptical tubes under compressions. The numerical model of the tubes are developed using ANSYS finite element program. Two important parameters are used such as elliptical ratios and oblique angles. The tubes are compressed quasi-statically and the force-displacement curves are extracted. Then, the area under the curves are calculated and it is represented the performances of energy absorptions. It is found numerically that the introductions of oblique angles during the crushing processes decrease the crushing performances. However, the elliptical-shaped tubes capable to enhance the energy absorption capabilities. On the other hand, the elliptical-shaped tubes produced the enhancement on the energy absorption capabilities.

  5. Oblique aerial images and their use in cultural heritage documentation

    DEFF Research Database (Denmark)

    Höhle, Joachim

    2013-01-01

    Oblique images enable three-dimensional (3d) modelling of objects with vertical dimensions. Such imagery is nowadays systematically taken of cities and may easily become available. The documentation of cultural heritage can take advantage of these sources of information. Two new oblique camera...... systems are presented and characteristics of such images are summarized. A first example uses images of a new multi-camera system for the derivation of orthoimages, façade plots with photo texture, 3d scatter plots, and dynamic 3d models of a historic church. The applied methodology is based...... developments. Special attention is given to the quality of input images. Investigations are carried out on edges in the images. The combination of oblique and nadir images enables new possibilities in the processing. The use of the near-infrared channel besides the red, green, and blue channel of the applied...

  6. Oblique perforation of thick metallic plates by rigid projectiles

    Institute of Scientific and Technical Information of China (English)

    Xiaowei Chen; Qingming Li; Saucheong Fan

    2006-01-01

    Oblique perforation of thick metallic plates by rigid Drojectiles with various nose shapes is studied in this paper.Two perforation mechanisms,i.e., the hole enlargement for a sharp projectile nose and the plugging formation for a blunt projectile nose,are considered in the proposed analytical model.It is shown that the perforation of a thick plate is dominated by several non-dimensional numbers,i.e., the impact function,the geometry function of projectile,the non-dimensional thickness of target and the impact obliquity.Explicit formulae are obtained to predict the ballistic limit.residual velocity and directional change for the oblique perforation of thick metallic plates.The proposed model is able to predict the critical condition for the occurrence of ricochet.The proposed model is validated by comparing the predictions with other existing models and independent experimental data.

  7. Method of Calculation of Crown Wall Stability in Oblique Waves

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    2007-01-01

    The wave loading along a structure exposed to oblique waves varies in time and space. Despite of this, the wave generated pressures are usually recorded by gauges only in one position of the wall (more gauges densily spaced is regarded as one position).......The wave loading along a structure exposed to oblique waves varies in time and space. Despite of this, the wave generated pressures are usually recorded by gauges only in one position of the wall (more gauges densily spaced is regarded as one position)....

  8. ACCURACY OF MEASUREMENTS IN OBLIQUE AERIAL IMAGES FOR URBAN ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    W. Ostrowski

    2016-10-01

    Full Text Available Oblique aerial images have been a source of data for urban areas for several years. However, the accuracy of measurements in oblique images during this time has been limited to a single meter due to the use of direct -georeferencing technology and the underlying digital elevation model. Therefore, oblique images have been used mostly for visualization purposes. This situation changed in recent years as new methods, which allowed for a higher accuracy of exterior orientation, were developed. Current developments include the process of determining exterior orientation and the previous but still crucial process of tie point extraction. Progress in this area was shown in the ISPRS/EUROSDR Benchmark on Multi-Platform Photogrammetry and is also noticeable in the growing interest in the use of this kind of imagery. The higher level of accuracy in the orientation of oblique aerial images that has become possible in the last few years should result in a higher level of accuracy in the measurements of these types of images. The main goal of this research was to set and empirically verify the accuracy of measurements in oblique aerial images. The research focused on photogrammetric measurements composed of many images, which use a high overlap within an oblique dataset and different view angles. During the experiments, two series of images of urban areas were used. Both were captured using five DigiCam cameras in a Maltese cross configuration. The tilt angles of the oblique cameras were 45 degrees, and the position of the cameras during flight used a high grade GPS/INS navigation system. The orientation of the images was set using the Pix4D Mapper Pro software with both measurements of the in-flight camera position and the ground control points (measured with GPS RTK technology. To control the accuracy, check points were used (which were also measured with GPS RTK technology. As reference data for the whole study, an area of the city-based map was used

  9. Experimental studies of oblique impact. [of meteorites on planetary surfaces

    Science.gov (United States)

    Gault, D. E.; Wedekind, J. A.

    1978-01-01

    Meteoritic materials most probably impact planetary bodies along oblique trajectories inclined less than 45 deg above their surfaces. Laboratory studies of hypervelocity impacts against rock and particulate media are presented that indicate important effects of obliquity on crater size, shape, and ejecta distribution. The effects are particularly important to crater size-frequency analyses and geologic interpretations of crater formations. Impacts at shallow incidence, which are not uncommon, lead to ricochet of the impacting object accompanied with some entrained excavated materials at velocities only slightly reduced from the pre-impact value.

  10. Oblique lumbar spine radiographs: importance in young patients

    Energy Technology Data Exchange (ETDEWEB)

    Libson, E.; Bloom, R.A.; Dinari, G.; Robin, G.C.

    1984-04-01

    Spondylolysis is a direct precursor of spondylolisthesis and can lead to crippling back pain. Of 1,743 patients surveyed, including 936 who were asymptomatic and 807 with back pain, 165 (including 91 who were asymptomatic and 74 with back pain) had spondylolysis, which was seen only on oblique lumbar views in 20% of cases. Because of the high false-negative rate of AP and lateral views, oblique views are essential in children and young adults. As spondylolysis is rare above L3, radiographs can be limited to L3-S1. Significantly less spondylolysis was seen in persons older than 30 with back pain usually caused by disk degeneration.

  11. Accuracy of Measurements in Oblique Aerial Images for Urban Environment

    Science.gov (United States)

    Ostrowski, W.

    2016-10-01

    Oblique aerial images have been a source of data for urban areas for several years. However, the accuracy of measurements in oblique images during this time has been limited to a single meter due to the use of direct -georeferencing technology and the underlying digital elevation model. Therefore, oblique images have been used mostly for visualization purposes. This situation changed in recent years as new methods, which allowed for a higher accuracy of exterior orientation, were developed. Current developments include the process of determining exterior orientation and the previous but still crucial process of tie point extraction. Progress in this area was shown in the ISPRS/EUROSDR Benchmark on Multi-Platform Photogrammetry and is also noticeable in the growing interest in the use of this kind of imagery. The higher level of accuracy in the orientation of oblique aerial images that has become possible in the last few years should result in a higher level of accuracy in the measurements of these types of images. The main goal of this research was to set and empirically verify the accuracy of measurements in oblique aerial images. The research focused on photogrammetric measurements composed of many images, which use a high overlap within an oblique dataset and different view angles. During the experiments, two series of images of urban areas were used. Both were captured using five DigiCam cameras in a Maltese cross configuration. The tilt angles of the oblique cameras were 45 degrees, and the position of the cameras during flight used a high grade GPS/INS navigation system. The orientation of the images was set using the Pix4D Mapper Pro software with both measurements of the in-flight camera position and the ground control points (measured with GPS RTK technology). To control the accuracy, check points were used (which were also measured with GPS RTK technology). As reference data for the whole study, an area of the city-based map was used. The archived results

  12. Modes of continental extension in a crustal wedge

    KAUST Repository

    Wu, Guangliang

    2015-07-01

    © 2015 Elsevier B.V. We ran numerical experiments of the extension of a crustal wedge as an approximation to extension in an orogenic belt or a continental margin. We study the effects of the strength of the lower crust and of a weak mid-crustal shear zone on the resulting extension styles. A weak mid-crustal shear zone effectively decouples upper crustal extension from lower crustal flow. Without the mid-crustal shear zone, the degree of coupling between the upper and the lower crust increases and extension of the whole crust tends to focus on the thickest part of the wedge. We identify three distinct modes of extension determined by the strength of the lower crust, which are characterized by 1) localized, asymmetric crustal exhumation in a single massif when the lower crust is weak, 2) the formation of rolling-hinge normal faults and the exhumation of lower crust in multiple core complexes with an intermediate strength lower crust, and 3) distributed domino faulting over the weak mid-crustal shear zone when the lower crust is strong. A frictionally stronger mid-crustal shear zone does not change the overall model behaviors but extension occurred over multiple rolling-hinges. The 3 modes of extension share characteristics similar to geological models proposed to explain the formation of metamorphic core complexes: 1) the crustal flow model for the weak lower crust, 2) the rolling-hinge and crustal flow models when the lower crust is intermediate and 3) the flexural uplift model when the lower crust is strong. Finally we show that the intensity of decoupling between the far field extension and lower crustal flow driven by the regional pressure gradient in the wedge control the overall style of extension in the models.

  13. Modes of continental extension in a crustal wedge

    Science.gov (United States)

    Wu, Guangliang; Lavier, Luc L.; Choi, Eunseo

    2015-07-01

    We ran numerical experiments of the extension of a crustal wedge as an approximation to extension in an orogenic belt or a continental margin. We study the effects of the strength of the lower crust and of a weak mid-crustal shear zone on the resulting extension styles. A weak mid-crustal shear zone effectively decouples upper crustal extension from lower crustal flow. Without the mid-crustal shear zone, the degree of coupling between the upper and the lower crust increases and extension of the whole crust tends to focus on the thickest part of the wedge. We identify three distinct modes of extension determined by the strength of the lower crust, which are characterized by 1) localized, asymmetric crustal exhumation in a single massif when the lower crust is weak, 2) the formation of rolling-hinge normal faults and the exhumation of lower crust in multiple core complexes with an intermediate strength lower crust, and 3) distributed domino faulting over the weak mid-crustal shear zone when the lower crust is strong. A frictionally stronger mid-crustal shear zone does not change the overall model behaviors but extension occurred over multiple rolling-hinges. The 3 modes of extension share characteristics similar to geological models proposed to explain the formation of metamorphic core complexes: 1) the crustal flow model for the weak lower crust, 2) the rolling-hinge and crustal flow models when the lower crust is intermediate and 3) the flexural uplift model when the lower crust is strong. Finally we show that the intensity of decoupling between the far field extension and lower crustal flow driven by the regional pressure gradient in the wedge control the overall style of extension in the models.

  14. Heat conduction problem of an evaporating liquid wedge

    Directory of Open Access Journals (Sweden)

    Tomas Barta

    2015-02-01

    Full Text Available We consider the stationary heat transfer near the contact line of an evaporating liquid wedge surrounded by the atmosphere of its pure vapor. In a simplified setting, the problem reduces to the Laplace equation in a half circle, subject to a non-homogeneous and singular boundary condition. By classical tools (conformal mapping, Green's function, we reformulate the problem as an integral equation for the unknown Neumann boundary condition in the setting of appropriate fractional Sobolev and weighted space. The unique solvability is then obtained by means of the Fredholm theorem.

  15. Interpretation and inverse analysis of the wedge splitting test

    DEFF Research Database (Denmark)

    Østergaard, Lennart; Stang, Henrik

    2002-01-01

    Determination of the stress-crack opening relationship, s(w) a material parameter in the fictitious crack model by Hillerborg has proven to be problematic and is still not a simple task to perform. However, this paper demonstrates that the cracked non-linear hinge model by Olesen may be applied...... to the wedge splitting test and that it is well suited for the interpretation of test results in terms of s(w). A fine agreement between the hinge and FEM-models has been found. It has also been found that the test and the hinge model form a solid basis for inverse analysis. The paper also discusses possible...

  16. Magmatism significantly alters the thermal structure of the wedge

    Science.gov (United States)

    Rees Jones, D. W.; Katz, R. F.; Rudge, J. F.; Tian, M.

    2016-12-01

    The temperature structure of the mantle wedge is typically modelled as a balance between thermal diffusion and advection by the solid mantle [e.g., 1]. The thermal state of the wedge promotes melting and melt transport in the natural system, but the thermal consequences of these processes have been neglected from previous models. We show that advective transport of sensible and latent heat by liquid magma can locally alter the temperature structure from canonical models by up to 200K. Liquids are liberated from the subducting slab by de-volatilization reactions. They trigger melting and become silicic en route to the surface, where they cause arc volcanism. These liquids transport heat advectively, and consume or supply latent heat as they melt or freeze. To analyse these effects, we parameterise melting in the presence of volatile species. We combine this with a one-dimensional "melting-column model," previously used to understand mid-ocean ridge volcanism. Our calculations highlight the thermal and chemical response to melt transport across the mantle wedge. Finally, we solve two-dimensional geodynamic models with a prescribed slab flux [2]. These models allow us to identify the most thermally significant fluxes of melt in the system. Perturbations of 200K are found at the base of the overriding lithosphere. This thermal signature of melt migration should be considered when interpreting heat flow, petrologic and seismic data [e.g., 3]. Such a thermal perturbation is likely to affect the chemistry of arc volcanoes, the solid mantle flow and, perhaps, the location of the volcanos themselves [4]. [1] van Keken, P. E., Currie, C., King, S. D., Behn, M. D., Cagnioncle, A., He, J., et al. (2008). A community benchmark for subduction zone modeling. PEPI, doi:10.1016/j.pepi.2008.04.015 [2] Wilson, C. R., Spiegelman, M., van Keken, P. E., & Hacker, B. R. (2014). Fluid flow in subduction zones: The role of solid rheology and compaction pressure. EPSL, doi:10.1016/j

  17. Inverse analysis of the wedge-splitting test

    DEFF Research Database (Denmark)

    Skocek, Jan; Stang, Henrik

    2008-01-01

    The amount of information which it is possible to retrieve from the wedge-splitting test is investigated. Inverse analysis is undertaken based on the analytical hinge model for various multi-linear softening curves. This showed that the commonly used bi-linear softening curve can be replaced...... by an tip to quad-linear curve, which is reflected by increased accuracy of the test simulation. Furthermore it was demonstrated that the next refinement of the softening curve leads to convergence problems due to problems with local minima. Finally, the semi-analytically obtained results are verified using...

  18. Electric monopoles in generalised B\\wedge F theories

    CERN Document Server

    Temple-Raston, M

    1996-01-01

    A tensor product generalisation of B\\wedge F theories is proposed to give a Bogomol'nyi structure. Non-singular, stable, finite-energy particle-like solutions to the Bogomol'nyi equations are studied. Unlike Yang-Mills(-Higgs) theory, the Bogomol'nyi structure does not appear as a perfect square in the Lagrangian. Consequently, the Bogomol'nyi energy can be obtained in more than one way. The added flexibility permits electric monopole solutions to the field equations.

  19. The effect of shoe design and lateral wedging on knee loading

    DEFF Research Database (Denmark)

    Mølgaard, Carsten; Kersting, Uwe G.

    -dimensional gait analysis. Barefoot walking, walking in a running shoe, an Oxford-type leather shoe, and a rocker shoe were analyzed. The shoes were tested both with and without a 10-degree full length laterally wedged insole. Results: Similar, significant reductions in the peak knee adduction moment with lateral...... wedges were observed in all three types of shoes. However, differences between shoe design were of similar magnitude as the effect of laterally wedged insoles. Only marginal changes in muscle activity for lateral hamstrings during barefoot toe-out walking and gastrocnemius when using the Oxford wedged...

  20. Modified retro-tubercle opening-wedge versus conventional high tibial osteotomy.

    Science.gov (United States)

    Keyhani, Sohrab; Abbasian, Mohammad Reza; Kazemi, Seyed Morteza; Esmailiejah, Ali Akbar; Seyed Hosseinzadeh, Hamid Reza; Shahi, Alisina; Shahi, Ali Sina; Firouzi, Farzad

    2011-01-01

    Despite the fact that common surgical techniques for the treatment of genu varum usually correct the malalignment in the affected knee, these methods have significant complications and cause problems in the long term. Retro-tubercle opening-wedge high tibial osteotomy is among the newer techniques for the treatment of genu varum. The goal of this study was to compare the results of retro-tubercle opening-wedge high tibial osteotomy with those of medial opening-wedge osteotomy. In a randomized, controlled trial, 72 patients with varus knees who were scheduled for surgery were assigned into either the retro-tubercle opening-wedge high tibial osteotomy (n=34) or medial opening-wedge osteotomy groups (n=38). Groups were matched for age and sex. The position of the patella was compared with respect to the tuberosity and the upper tibial slope pre- and postoperatively. Patients were followed for an average of 13 months (range, 10-21 months). In the retro-tubercle opening-wedge high tibial osteotomy group, the length of the patellar tendon did not significantly differ pre- and postoperatively (P≥.5); however, in the medial opening-wedge osteotomy group, a statistically significant shortening was noted in patellar tendon postoperatively (P≤.05). Similarly, the tibial plateau inclination showed a statistically significant difference postoperatively in the medial opening-wedge osteotomy group, while the difference in the retro-tubercle opening-wedge high tibial osteotomy group did not reach statistical significance.

  1. Triangular metal wedges for subwavelength plasmon-polariton guiding at telecom wavelengths

    DEFF Research Database (Denmark)

    Boltasseva, Alexandra; Volkov, V.S.; Nielsen, Rasmus Bundgaard

    2008-01-01

    . Using scanning near-field optical imaging at the wavelengths in the range of 1.43 - 1.52 µm, we demonstrate low-loss (propagation length ~ 120 µm) and well-confined (mode width ≅ 1.3 µm) wedge plasmon-polariton guiding along triangular 6-µm-high and 70.5°- angle gold wedges. Experimental observations......We report on subwavelength plasmon-polariton guiding by triangular metal wedges at telecom wavelengths. A high-quality fabrication procedure for making gold wedge waveguides, which is also mass- production compatible offering large-scale parallel fabrication of plasmonic components, is developed...

  2. Decollement controls on pro versus retro wedge deformation in mountain belts

    Science.gov (United States)

    Grool, Arjan; Huismans, Ritske S.; Ford, Mary

    2017-04-01

    Doubly vergent orogens have a pro-wedge (lower plate) and a retro-wedge (upper plate). Most shortening is accommodated on the pro-wedge while retro-wedge shortening is typically limited. For example, the Eastern Pyrenees have experienced about 145 km of convergence, of which about 125 km (86%) was accommodated in the pro-wedge and about 20 km (14%) in the retro-wedge. Strain partitioning between pro- and retro-wedge is influenced by several factors, some of which have been identified in past work: Extensional inheritance and syn-orogenic sedimentation can help to increase the percentage of total shortening accommodated in the retro-wedge while erosion promotes pro-wedge shortening. We use high-resolution 2D numerical models to investigate factors that control pro- versus retro-wedge shortening. For a total convergence similar to the Eastern Pyrenees, our models predict that variations in extensional inheritance and syn-orogenic sedimentation will result in a maximum of 10% of total shortening being accommodated in the retro-wedge. Here, we investigate the role of 1) the rheology and 2) distribution of a decollement layer. Our models show that: 1) Decollement rheology has a first order control on strain distribution between the pro- and the retro-wedge. After 145 km of total convergence, a model with a weak frictional (φ=2, shale-like) decollement will only accommodate 9% of total shortening in the retro-wedge. In contrast in models with a weak viscous (μ=1018, salt-like) decollement retro-wedge shortening amounts to 18% and a stronger, but still weak, viscous decollement (μ=1019) leads to 21%. 2) Décollement distribution influences the timing of the first outward propagation of thick-skinned deformation in the retro-wedge. In the Eastern Pyrenees, thick-skinned deformation propagated out into the retro-wedge within 145 km of total convergence. In models with a decollement on both sides of the orogen this only occurred after 240 km. If, as in the Eastern

  3. Dying Flow Bursts as Generators of the Substorm Current Wedge

    Science.gov (United States)

    Haerendel, Gerhard

    2016-07-01

    Many theories or conjectures exist on the driver of the substorm current wedge, e.g. rerouting of the tail current, current disruption, flow braking, vortex formation, and current sheet collapse. Magnitude, spatial scale, and temporal development of the related magnetic perturbations suggest that the generator is related to the interaction of the flow bursts with the dipolar magnetosphere after onset of reconnection in the near-Earth tail. The question remains whether it is the flow energy that feeds the wedge current or the internal energy of the arriving plasma. In this presentation I argue for the latter. The current generation is attributed to the force exerted by the dipolarized magnetic field of the flow bursts on the preceding layer of high-beta plasma after flow braking. The generator current is the grad-B current at the outer boundary of the compressed high-beta plasma layers. It needs the sequential arrival of several flow bursts to account for duration and magnitude of the ionospheric closure current.

  4. Growth and mixing dynamics of mantle wedge plumes

    Science.gov (United States)

    Gorczyk, Weronika; Gerya, Taras V.; Connolly, James A. D.; Yuen, David A.

    2007-07-01

    Recent work suggests that hydrated partially molten thermal-chemical plumes that originate from subducted slab as a consequence of Rayleigh-Taylor instability are responsible for the heterogeneous composition of the mantle wedge. We use a two-dimensional ultrahigh-resolution numerical simulation involving 10 × 109 active markers to anticipate the detailed evolution of the internal structure of natural plumes beneath volcanic arcs in intraoceanic subduction settings. The plumes consist of partially molten hydrated peridotite, dry solid mantle, and subducted oceanic crust, which may compose as much as 12% of the plume. As plumes grow and mature these materials mix chaotically, resulting in attenuation and duplication of the original layering on scales of 1-1000 m. Comparison of numerical results with geological observations from the Horoman ultramafic complex in Japan suggests that mixing and differentiation processes related to development of partially molten plumes above slabs may be responsible for the strongly layered lithologically mixed (marble cake) structure of asthenospheric mantle wedges.

  5. Relation of the auroral substorm to the substorm current wedge

    Science.gov (United States)

    McPherron, Robert L.; Chu, Xiangning

    2016-12-01

    The auroral substorm is an organized sequence of events seen in the aurora near midnight. It is a manifestation of the magnetospheric substorm which is a disturbance of the magnetosphere brought about by the solar wind transfer of magnetic flux from the dayside to the tail lobes and its return through the plasma sheet to the dayside. The most dramatic feature of the auroral substorm is the sudden brightening and poleward expansion of the aurora. Intimately associated with this expansion is a westward electrical current flowing across the bulge of expanding aurora. This current is fed by a downward field-aligned current (FAC) at its eastern edge and an upward current at its western edge. This current system is called the substorm current wedge (SCW). The SCW forms within a minute of auroral expansion. FAC are created by pressure gradients and field line bending from shears in plasma flow. Both of these are the result of pileup and diversion of plasma flows in the near-earth plasma sheet. The origins of these flows are reconnection sites further back in the tail. The auroral expansion can be explained by a combination of a change in field line mapping caused by the substorm current wedge and a tailward growth of the outer edge of the pileup region. We illustrate this scenario with a complex substorm and discuss some of the problems associated with this interpretation.

  6. An automated optical wedge calibrator for Dobson ozone spectrophotometers

    Science.gov (United States)

    Evans, R. D.; Komhyr, W. D.; Grass, R. D.

    1994-01-01

    The Dobson ozone spectrophotometer measures the difference of intensity between selected wavelengths in the ultraviolet. The method uses an optical attenuator (the 'Wedge') in this measurement. The knowledge of the relationship of the wedge position to the attenuation is critical to the correct calculation of ozone from the measurement. The procedure to determine this relationship is time-consuming, and requires a highly skilled person to perform it correctly. The relationship has been found to change with time. For reliable ozone values, the procedure should be done on a Dobson instrument at regular intervals. Due to the skill and time necessary to perform this procedure, many instruments have gone as long as 15 years between procedures. This article describes an apparatus that performs the procedure under computer control, and is adaptable to the majority of existing Dobson instruments. Part of the apparatus is usable for normal operation of the Dobson instrument, and would allow computer collection of the data and real-time ozone measurements.

  7. Direct oblique sagittal CT of orbital wall fractures

    Energy Technology Data Exchange (ETDEWEB)

    Ball, J.B. Jr.

    1987-03-01

    Direct oblique sagittal CT was used to evaluate trauma to 77 orbits. Sixty-seven orbital wall fractures with intact orbital rims (36 floor, 22 medial wall, nine roof) were identified in 47 orbits. Since persistent diplopia and/or enophthalmos may warrant surgical repair of orbital floor fractures, optimal imaging should include an evaluation of extraocular muscle status, the nature and amount of displaced orbital contents, and an accurate definition of fracture margins. For orbital floor fractures, a combination of the direct oblique sagittal and direct coronal projections optimally displayed all fracture margins, the fracture's relationship to the inferior orbital rim and medial orbital wall, and the amount of displacement into the maxillary sinus. Inferior rectus muscle status with 36 floor fractures was best seen on the direct oblique sagittal projection in 30 fractures (83.3%) and was equally well seen on sagittal and coronal projections in two fractures (5.5%). Floor fractures were missed on 100% of axial, 5.5% of sagittal, and 0% of coronal projections. Since the direct oblique sagittal projection complements the direct coronal projection in evaluating orbital floor fractures, it should not be performed alone. A technical approach to the CT evaluation or orbital wall fractures is presented.

  8. Obliquely co-evaporated thin films for magnetic recording

    NARCIS (Netherlands)

    Kranenburg, van Herma

    1992-01-01

    A systematic research is carried out on obliquely ( co- ) evaporated media for magnetic recording applications. The investigated materials concern Co-alloys, being Co-Cr, Co-Ag and Co- Ta. The re1ations between deposition parameters, morphology , texture and rnagnetic behaviour were swdied. The acce

  9. Pulp Rotation Flap for Lateral Oblique Fingertip Defects.

    Science.gov (United States)

    Ozturk, Muhammed Besir; Barutca, Seda Asfuroglu; Aksan, Tolga; Atik, Bekir

    2016-11-01

    Fingertip amputations are among the most common injuries seen in the hand. According to the geometry of the amputation, it may be classified as transverse or oblique (dorsal, volar, or lateral type). Although numerous repair techniques have been described in the literature, there are few alternatives suitable for lateral oblique type fingertip amputations. Between 2012 and 2016, we operated on 16 patients with simple rotation flap from the remaining part of the pulpa in a rotation and advancement manner for the reconstruction of lateral oblique type fingertip amputations. All but two of the flaps healed completely with full flap survival. Superficial distal flap necrosis was observed in two patients. They healed by secondary intention. No obvious hooked nail occurred in patients. Cold intolerance was observed in one patient; joint stiffness or hypersensitivity was not observed in any of the patients. Stiffness of the proximal interphalangeal joint did not occur. Two point discrimination test results were found to be normal. This technique is simple, rapid, and free from relatively major complications. This flap allows for anatomical reconstruction of the fingertip by using a similar tissue in cases of lateral oblique fingertip amputations, where only a few flap options can be successful.

  10. Reorientation of magnetic anisotropy in obliquely sputtered metallic thin films

    NARCIS (Netherlands)

    Lisfi, A.; Lodder, J.C.; Wormeester, H.; Poelsema, B.

    2002-01-01

    Reorientation in the magnetic anisotropy as a function of film thickness has been observed in Co-Ni and Co thin films, obliquely sputtered on a polyethylene terephthalate substrate at a large incidence angle (70°). This effect is a consequence of the low magnetocrystalline anisotropy of the films (f

  11. Measurement of ocular torsion variation following superior oblique tenectomy

    Directory of Open Access Journals (Sweden)

    Bruna Lana Ducca

    2014-12-01

    Full Text Available Purposes: To objectively evaluate the torsional effect of the superior oblique muscle-weakening surgery using the tenectomy technique proposed by Souza-Dias. Methods: The present prospective study included 10 patients (20 eyes with horizontal strabismus, bilateral superior oblique overaction and A-pattern of 15 to 30 prism diopters who underwent superior oblique tenectomy. Objective assessment of ocular torsion was performed by retinography immediately before and one month after surgery. The amount of ocular torsion was determined by measuring the angle formed by a horizontal line drawn across the geometric center of the optic disc and a second line connecting this point to the fovea. Results: The median preoperative angle was 5.56° in the right eyes and -3.43° in the left eyes. The median postoperative angle was 1.84° in the right eyes and -3.12° in the left eyes. The angle variation was statistically significant in both eyes (p=0.012 and p=0.01, respectively. Conclusion: The present study suggests that superior oblique tenectomy has an extorter effect, decreasing the intorsion detected on overaction of this muscle.

  12. Oblique water entry of a three dimensional body

    Directory of Open Access Journals (Sweden)

    Scolan Yves-Marie

    2014-12-01

    Full Text Available The problem of the oblique water entry of a three dimensional body is considered. Wagner theory is the theoretical framework. Applications are discussed for an elliptic paraboloid entering an initially flat free surface. A dedicated experimental campaign yields a data base for comparisons. In the present analysis, pressure, force and dynamics of the wetted surface expansion are assessed.

  13. Interaction of Oblique Incident Electromagnetic Wave with Relativistic Ionization Front

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Interactions of oblique incident probe wave with oncoming ionization fronts have been investigated using moving boundary conditions. Field conversion coefficients of reflection,transmission and magnetic modes produced in the interactions are derived. Phase matching conditions at the front and frequency up-shifting formulas for the three modes are also presented.

  14. Morphological development of coasts at very oblique wave incidence

    DEFF Research Database (Denmark)

    Petersen, Dorthe Pia; Deigaard, Rolf; Fredsøe, Jørgen

    2003-01-01

    This study focuses on one distinct feature to be found on coasts exposed to a very oblique wave incidence, namely an accumulating spit. That is a spit where no retreat of the shoreline is going on along the spit. This requires a monotonically decreasing sediment transport capacity from the updrift...

  15. Combined obliquity and precession pacing of late Pleistocene deglaciations.

    Science.gov (United States)

    Huybers, Peter

    2011-12-08

    Milankovitch proposed that Earth resides in an interglacial state when its spin axis both tilts to a high obliquity and precesses to align the Northern Hemisphere summer with Earth's nearest approach to the Sun. This general concept has been elaborated into hypotheses that precession, obliquity or combinations of both could pace deglaciations during the late Pleistocene. Earlier tests have shown that obliquity paces the late Pleistocene glacial cycles but have been inconclusive with regard to precession, whose shorter period of about 20,000 years makes phasing more sensitive to timing errors. No quantitative test has provided firm evidence for a dual effect. Here I show that both obliquity and precession pace late Pleistocene glacial cycles. Deficiencies in time control that have long stymied efforts to establish orbital effects on deglaciation are overcome using a new statistical test that focuses on maxima in orbital forcing. The results are fully consistent with Milankovitch's proposal but also admit the possibility that long Southern Hemisphere summers contribute to deglaciation.

  16. Calibrating the New Ultracam Osprey Oblique Aerial Sensor

    Science.gov (United States)

    Gruber, M.; Walcher, W.

    2014-03-01

    We present methods and results to calibrate the new oblique sensor UltraCam Osprey which was presented for the first time at the ASPRS 2013 conference and exhibition in Baltimore, MD, March 2013. Even if this was not the first time when oblique sensors were introduced into the market, the UltraCam Osprey did show several new conceptual details which are illustrated in this presentation. The design of the camera is focusing on two important characteristics, a metric nadir component which has been derived from the UltraCam Lp sensor, and collection efficiency through very large swath width. The nadir sensor consists of the 90 megapixel panchromatic camera, true-color RGB, and a near-infrared camera. Adding six oblique camera heads, with two each in forward and backwards direction, results in unmatched oblique collection efficiency. We first explain the camera and cone configuration along with the geometric layout of the sensor system. Then we describe the laboratory setup for geometric calibration of the UltraCam Osprey and the calibration process along with the actual results of one such calibration showing sub-pixel accurate image geometry. This proves that the UltraCam Osprey is a fully calibrated metric camera system suitable for photogrammetric survey applications.

  17. Oblique Aerial Imagery for NMA - Some best Practices

    Science.gov (United States)

    Remondino, F.; Toschi, I.; Gerke, M.; Nex, F.; Holland, D.; McGill, A.; Talaya Lopez, J.; Magarinos, A.

    2016-06-01

    Oblique airborne photogrammetry is rapidly maturing and being offered by service providers as a good alternative or replacement of the more traditional vertical imagery and for very different applications (Fig.1). EuroSDR, representing European National Mapping Agencies (NMAs) and research organizations of most EU states, is following the development of oblique aerial cameras since 2013, when an ongoing activity was created to continuously update its members on the developments in this technology. Nowadays most European NMAs still rely on the traditional workflow based on vertical photography but changes are slowly taking place also at production level. Some NMAs have already run some tests internally to understand the potential for their needs whereas other agencies are discussing on the future role of this technology and how to possibly adapt their production pipelines. At the same time, some research institutions and academia demonstrated the potentialities of oblique aerial datasets to generate textured 3D city models or large building block models. The paper provides an overview of tests, best practices and considerations coming from the R&D community and from three European NMAs concerning the use of oblique aerial imagery.

  18. Analyzing RCD30 Oblique Performance in a Production Environment

    Science.gov (United States)

    Soler, M. E.; Kornus, W.; Magariños, A.; Pla, M.

    2016-06-01

    In 2014 the Institut Cartogràfic i Geològic de Catalunya (ICGC) decided to incorporate digital oblique imagery in its portfolio in response to the growing demand for this product. The reason can be attributed to its useful applications in a wide variety of fields and, most recently, to an increasing interest in 3d modeling. The selection phase for a digital oblique camera led to the purchase of the Leica RCD30 Oblique system, an 80MPixel multispectral medium-format camera which consists of one Nadir camera and four oblique viewing cameras acquiring images at an off-Nadir angle of 35º. The system also has a multi-directional motion compensation on-board system to deliver the highest image quality. The emergence of airborne oblique cameras has run in parallel to the inclusion of computer vision algorithms into the traditional photogrammetric workflows. Such algorithms rely on having multiple views of the same area of interest and take advantage of the image redundancy for automatic feature extraction. The multiview capability is highly fostered by the use of oblique systems which capture simultaneously different points of view for each camera shot. Different companies and NMAs have started pilot projects to assess the capabilities of the 3D mesh that can be obtained using correlation techniques. Beyond a software prototyping phase, and taking into account the currently immature state of several components of the oblique imagery workflow, the ICGC has focused on deploying a real production environment with special interest on matching the performance and quality of the existing production lines based on classical Nadir images. This paper introduces different test scenarios and layouts to analyze the impact of different variables on the geometric and radiometric performance. Different variables such as flight altitude, side and forward overlap and ground control point measurements and location have been considered for the evaluation of aerial triangulation and

  19. Duality in nonlinear B$\\wedge$F models equivalence between self-dual and topologically massive Born-Infeld B$\\wedge$F models

    CERN Document Server

    Menezes, R; Ribeiro, R F; Wotzasek, C

    2002-01-01

    We study the dual equivalence between the nonlinear generalization of the self-dual ($NSD_{B\\wedge F}$) and the topologically massive $B\\wedge F$ models with particular emphasis on the nonlinear electrodynamics proposed by Born and Infeld. This is done through a dynamical gauge embedding of the nonlinear self-dual model yielding to a gauge invariant and dynamically equivalent theory. We clearly show that nonpolinomial $NSD_{B\\wedge F}$ models can be mapped, through a properly defined duality transformation, into $TM_{B\\wedge F}$ actions. The general result obtained is then particularized for a number of examples, including the Born-Infeld-BF (BIBF) model that has experienced a revival in the recent literature.

  20. Climate stabilization wedges in action: a systems approach to energy sustainability for Hawaii Island.

    Science.gov (United States)

    Johnson, Jeremiah; Chertow, Marian

    2009-04-01

    Pacala and Socolow developed a framework to stabilize global greenhouse gas levels for the next fifty years using wedges of constant size representing an increasing use of existing technologies and approaches for energy efficiency, carbon free generation, renewables, and carbon storage. The research presented here applies their approach to Hawaii Island, with modifications to support local scale analysis and employing a "bottom-up" methodology that allows for wedges of various sizes. A discretely bounded spatial unit offers a testing ground for a holistic approach to improving the energy sector with the identification of local options and limitations to the implementation of a comprehensive energy strategy. Nearly 80% of total primary energy demand across all sectors for Hawaii Island is currently met using petroleum-based fuels.The Sustainable Energy Plan scenario included here presents an internally consistent set of recommendations bounded by local constraints in areas such as transportation efficiency, centralized renewable generation (e.g., geothermal, wind), reduction in transmission losses, and improved building efficiency. This scenario shows thatthe demand for primary energy in 2030 could be reduced by 23% through efficiency measures while 46% could be met by renewable generation, resulting in only 31% of the projected demand being met by fossil fuels. In 2030, the annual releases of greenhouse gases would be 3.2 Mt CO2-eq/year under the Baseline scenario, while the Sustainable Energy Plan would reduce this to 1.2 Mt CO2-eq/year--an annual emissions rate 40% below 2006 levels and 10% below 1990 levels. The total for greenhouse gas emissions during the 24-year study period (2007 to 2030) is 59.9 Mt CO2-eq under the Baseline scenario and 32.5 Mt CO2-eq under the Sustainable Energy Plan scenario. Numerous combinations of efficiency and renewable energy options can be employed in a manner that stabilizes the greenhouse gas emissions of Hawaii Island.

  1. Spatial and temporal distribution of deformation at the front of the Andean orogenic wedge in Bolivia and implications for incremental wedge evolution

    Science.gov (United States)

    Weiss, J. R.; Brooks, B. A.; Vergani, G.; Arrowsmith, R.

    2012-12-01

    There is no consensus regarding how orogenic wedges accommodate deformation over seismo-tectonic timescales. Results from the Himalaya and Taiwan suggest differing mechanisms including localized deformation along a single wedge-front structure and distributed shortening across multiple structures respectively. Here we provide the first detailed constraints on the distribution and timing of deformation at the front of the Andean orogenic wedge using industry acquired seismic reflection data from the ~500-km-long thin-skinned fold-and-thrust belt of the Bolivian Subandes (BSA). Almost no information exists on the recent history of BSA wedge-front deformation despite the presence of multiple ~10-m-high topographic scarps on Holocene surfaces and a recent analysis of the GPS-derived velocity field, which suggests the frontal Mandeyapecua thrust fault system (MTFS) is capable of >Mw 8 earthquakes. We use stratigraphic relationships across fault-related folds to depict the onset of deformation for the complete suite of structures comprising the MTFS. For each structure we determine the uncertainty in timing using an envelope of seismic velocity models from ~70 well-logs and published Quaternary sedimentation rates for the region. We further explore fault geometry and fault slip parameters associated with the displacement field of seismic reflection horizons using elastic dislocation theory. Our analyses reveal the presence of at least eight distinct fault segments comprising the MTFS, including previously unrecognized subsurface thrust faults that have been active since ~1 Ma. Shortening rates are generally higher across the younger, northern portion of the fault system but across-strike, in a ~50-km-wide zone from west to east, no distinct pattern of deformation migration exists. We estimate the percentage of whole-wedge deformation accommodated by wedge-front structures using our new fault slip rates combined with the wedge-loading rate of ~10 mm/yr and place our

  2. First direct dating of Late Pleistocene ice-wedges by AMS

    NARCIS (Netherlands)

    Vasil'chuk, YK; van der Plicht, J; Jungner, H; Sonninen, E; Vasil'chuk, AC; Vasil'chuk, Yurij K.; Vasil'chuk, Alla C.

    2000-01-01

    We present the first direct dating by C-14-accelerator mass spectrometry of three Late Pleistocene syngenetic ice-wedges from the Seyaha cross-section. They are representative of permafrost with multistage ice-wedges from the North of Western Siberia. The most important result is the clear vertical

  3. Revisit the classical Newmark displacement method for earthquake-induced wedge slide

    Science.gov (United States)

    Yang, Che-Ming; Cheng, Hui-Yun; Wu, Wen-Jie; Hsu, Chang-Hsuan; Dong, Jia-Jyun; Lee, Chyi-Tyi

    2016-04-01

    Newmark displacement method has been widely used to study the earthquake-induced landslides and adopted to explore the initiation and kinematics of catastrophic planar failure in recent years. However, surprisingly few researchers utilize the Newmark displacement method to study the earthquake-induced wedge slide. The classical Newmark displacement method for earthquake-induced wedge sliding assumed the wedge is rigid and the vertical acceleration, as well as the horizontal acceleration perpendicular to the sliding direction, is neglected. Moreover, the friction coefficients on the weak planes are assumed as unchanged during sliding. The purpose of this study is to test the reasonableness of the aforementioned assumptions. This study uses Newmark displacement method incorporating the rigid wedge method (RWM) and maximum shear stress method (MSSM) to evaluate the influence of wedge deformation. We design the geometry of the wedge and input the synthetic seismicity to trigger the wedge slide. The influence for neglecting the vertical and horizontal (perpendicular to the sliding direction) accelerations is also assessed. Besides, this research incorporates the velocity-displacement dependent friction law in the analysis to evaluate the influence of constant friction coefficient assumption. Result of this study illustrated that the aforementioned assumptions have significant effects on the calculated permeant displacement, moving speed, and failure initiation. To conclude, this study provides new insights on the initiation and kinematics of an earthquake induced wedge slide.

  4. Enhancement of linear and second-order hyperpolarizabilities in wedge-shaped nanostructures

    Science.gov (United States)

    Jayabalan, J.; Singh, Manoranjan P.; Rustagi, K. C.

    2003-08-01

    Analytical solutions for the wave functions for free electrons inside a wedge-shaped quantum dot are reported. For silver wedge-shaped quantum dots, linear and second-order hyperpolarizabilities are calculated for various apex angles. It is found that linear and nonlinear hyperpolarizabilities both increase with decreasing apex angle.

  5. Duwamish Waterways Navigation Improvement Study: Analysis of Impacts on Water Quality and Salt Wedge Characteristics.

    Science.gov (United States)

    1981-02-01

    dissolved oxygen consumption in the saltwater wedge is emphasized. A section has also been prepared discussing sediment transport in the estuary...biomass produced and sedimented 23 1,000 800 00 0 400 Xi. . *-*’* 200 ox- :~. ---0 - .....’ ~ ’J FIGURE 6 Annual Dissolved Oxygen Consumption in the wedge

  6. Reflection of a converging cylindrical shock wave segment by a straight wedge

    Science.gov (United States)

    Gray, B.; Skews, B.

    2017-01-01

    As a converging cylindrical shock wave propagates over a wedge, the shock wave accelerates and the angle between the shock wave and the wedge decreases. This causes the conditions at the reflection point to move from what would be the irregular reflection domain for a straight shock wave into the regular reflection domain. This paper covers a largely qualitative study of the reflection of converging shock wave segments with Mach numbers between 1.2 and 2.1 by wedges inclined at angles between 15° and 60° from experimental and numerical results. The sonic condition conventionally used for predicting the type of reflection of straight shock waves was found to also be suitable for predicting the initial reflection of a curved shock wave. Initially regular reflections persisted until the shock was completely reflected by the wedge, whereas the triple point of initially irregular reflections was observed to return to the wedge surface, forming transitioned regular reflection. After the incident shock wave was completely reflected by the wedge, a shock wave focusing mechanism was observed to amplify the pressure on the surface of the wedge by a factor of up to 100 for low wedge angles.

  7. A quantum hybrid with a thin antenna at the vertex of a wedge

    Science.gov (United States)

    Carlone, Raffaele; Posilicano, Andrea

    2017-03-01

    We study the spectrum, resonances and scattering matrix of a quantum Hamiltonian on a "hybrid surface" consisting of a half-line attached by its endpoint to the vertex of a concave planar wedge. At the boundary of the wedge, outside the vertex, homogeneous Dirichlet conditions are imposed. The system is tunable by varying the measure of the angle at the vertex.

  8. Immediate and 1 week effects of laterally wedge insoles on gait biomechanics in healthy females.

    Science.gov (United States)

    Weinhandl, Joshua T; Sudheimer, Sarah E; Van Lunen, Bonnie L; Stewart, Kimberly; Hoch, Matthew C

    2016-03-01

    It is estimated that approximately 45% of the U.S. population will develop knee osteoarthritis, a disease that creates significant economic burdens in both direct and indirect costs. Laterally wedged insoles have been frequently recommended to reduce knee abduction moments and to manage knee osteoarthritis. However, it remains unknown whether the lateral wedge will reduce knee abduction moments over a prolonged period of time. Thus, the purposes of this study were to (1) examine the immediate effects of a laterally wedged insole in individuals normally aligned knees and (2) determine prolonged effects after the insole was worn for 1 week. Gait analysis was performed on ten women with and without a laterally wedged insole. After participants wore the wedges for a week, a second gait analysis was performed with and without the insole. The wedged insole did not affect peak knee abduction moment, although there was a significant increase in knee abduction angular impulse after wearing the insoles for 1 week. Furthermore, there was a significant increase in vertical ground reaction force at the instance of peak knee abduction moment with the wedges. While the laterally wedged insole used in the current study did not alter knee abduction moments as expected, other studies have shown alterations. Future studies should also examine a longer acclimation period, the influence of gait speed, and the effect of different shoe types with the insole.

  9. Pan-Arctic ice-wedge degradation in warming permafrost and its influence on tundra hydrology

    Science.gov (United States)

    Liljedahl, Anna K.; Boike, Julia; Daanen, Ronald P.; Fedorov, Alexander N.; Frost, Gerald V.; Grosse, Guido; Hinzman, Larry D.; Iijma, Yoshihiro; Jorgenson, Janet C.; Matveyeva, Nadya; Necsoiu, Marius; Raynolds, Martha K.; Romanovsky, Vladimir E.; Schulla, Jörg; Tape, Ken D.; Walker, Donald A.; Wilson, Cathy J.; Yabuki, Hironori; Zona, Donatella

    2016-04-01

    Ice wedges are common features of the subsurface in permafrost regions. They develop by repeated frost cracking and ice vein growth over hundreds to thousands of years. Ice-wedge formation causes the archetypal polygonal patterns seen in tundra across the Arctic landscape. Here we use field and remote sensing observations to document polygon succession due to ice-wedge degradation and trough development in ten Arctic localities over sub-decadal timescales. Initial thaw drains polygon centres and forms disconnected troughs that hold isolated ponds. Continued ice-wedge melting leads to increased trough connectivity and an overall draining of the landscape. We find that melting at the tops of ice wedges over recent decades and subsequent decimetre-scale ground subsidence is a widespread Arctic phenomenon. Although permafrost temperatures have been increasing gradually, we find that ice-wedge degradation is occurring on sub-decadal timescales. Our hydrological model simulations show that advanced ice-wedge degradation can significantly alter the water balance of lowland tundra by reducing inundation and increasing runoff, in particular due to changes in snow distribution as troughs form. We predict that ice-wedge degradation and the hydrological changes associated with the resulting differential ground subsidence will expand and amplify in rapidly warming permafrost regions.

  10. Investigation of a Wedge Adhesion Test for Edge Seals

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, Michael; Wohlgemuth, John; Miller, David; Postak, Lori; Booth, Dennis; Phillips, Nancy

    2016-09-26

    Many photovoltaic (PV) technologies have been found to be sensitive to moisture that diffuses into a PV package. Even with the use of impermeable frontsheets and backsheets, moisture can penetrate from the edges of a module. To limit this moisture ingress pathway from occurring, manufacturers often use a low permeability polyisobutylene (PIB) based edge seal filled with desiccant to further restrict moisture ingress. Moisture ingress studies have shown that these materials are capable of blocking moisture for the 25-year life of a module; but to do so, they must remain well-adhered and free of cracks. This work focuses on adapting the Boeing Wedge test for use with edge seals laminated using glass substrates as part of a strategy to assess the long-term durability of edge seals. The advantage of this method is that it duplicates the residual stresses and strains that a glass/glass module may have when the lamination process results in some residual glass bending that puts the perimeter in tension. Additionally, this method allows one to simultaneously expose the material to thermal stress, humidity, mechanical stress, and ultraviolet radiation. The disadvantage of this method generally is that we are limited by the fracture toughness of the glass substrates that the edge seal is adhered to. However, the low toughness of typical uncrosslinked or sparsely crosslinked PIB makes them suitable for this technique. We present data obtained during the development of the wedge test for use with PV edge seal materials. This includes development of the measuring techniques and evaluation of the test method with relevant materials. We find consistent data within a given experiment, along with the theoretical independence of fracture toughness measurements with wedge thickness. This indicates that the test methodology is reproducible. However, even though individual experimental sets are consistent, the reproducibility between experimental sets is poor. We believe this may be

  11. Investigation of a wedge adhesion test for edge seals

    Science.gov (United States)

    Kempe, Michael; Wohlgemuth, John; Miller, David; Postak, Lori; Booth, Dennis; Phillips, Nancy

    2016-09-01

    Many photovoltaic (PV) technologies have been found to be sensitive to moisture that diffuses into a PV package. Even with the use of impermeable frontsheets and backsheets, moisture can penetrate from the edges of a module. To limit this moisture ingress pathway from occurring, manufacturers often use a low permeability polyisobutylene (PIB) based edge seal filled with desiccant to further restrict moisture ingress. Moisture ingress studies have shown that these materials are capable of blocking moisture for the 25-year life of a module; but to do so, they must remain well-adhered and free of cracks. This work focuses on adapting the Boeing Wedge test for use with edge seals laminated using glass substrates as part of a strategy to assess the long-term durability of edge seals. The advantage of this method is that it duplicates the residual stresses and strains that a glass/glass module may have when the lamination process results in some residual glass bending that puts the perimeter in tension. Additionally, this method allows one to simultaneously expose the material to thermal stress, humidity, mechanical stress, and ultraviolet radiation. The disadvantage of this method generally is that we are limited by the fracture toughness of the glass substrates that the edge seal is adhered to. However, the low toughness of typical uncrosslinked or sparsely crosslinked PIB makes them suitable for this technique. We present data obtained during the development of the wedge test for use with PV edge seal materials. This includes development of the measuring techniques and evaluation of the test method with relevant materials. We find consistent data within a given experiment, along with the theoretical independence of fracture toughness measurements with wedge thickness. This indicates that the test methodology is reproducible. However, even though individual experimental sets are consistent, the reproducibility between experimental sets is poor. We believe this may be

  12. The effect of shoe design and lateral wedging on knee loading

    DEFF Research Database (Denmark)

    Mølgaard, Carsten; Kersting, Uwe G.

    The increasing number of patients with developing osteoarthritis is accompanied by a growing scientific interest in non-operative early treatment strategies. It is generally believed that laterally wedged insoles can change the distribution of the knee loading, but the importance of footwear design......-dimensional gait analysis. Barefoot walking, walking in a running shoe, an Oxford-type leather shoe, and a rocker shoe were analyzed. The shoes were tested both with and without a 10-degree full length laterally wedged insole. Results: Similar, significant reductions in the peak knee adduction moment with lateral...... wedges were observed in all three types of shoes. However, differences between shoe design were of similar magnitude as the effect of laterally wedged insoles. Only marginal changes in muscle activity for lateral hamstrings during barefoot toe-out walking and gastrocnemius when using the Oxford wedged...

  13. Bonding mechanism of ultrasonic wedge bonding of copper wire on Au/Ni/Cu substrate

    Institute of Scientific and Technical Information of China (English)

    TIAN Yan-hong; WANG Chun-qing; Y. Norman ZHOU

    2008-01-01

    The ultrasonic wedge bonding with d25 μm copper wire was achieved on Au/Ni plated Cu substrate at ambient temperature. Ultrasonic wedge bonding mechanism was investigated by using SEM/EDX, pull test, shear test and microhardness test. The results show that the thinning of the Au layer occurs directly below the center of the bonding tool with the bonding power increasing. The interdiffusion between copper wire and Au metallization during the wedge bonding is assumed negligible, and the wedge bonding is achieved by wear action induced by ultrasonic vibration. The ultrasonic power contributes to enhance the deformation of copper wire due to ultrasonic softening effect which is then followed by the strain hardening of the copper wedge bonding.

  14. Accuracy Potential and Applications of MIDAS Aerial Oblique Camera System

    Science.gov (United States)

    Madani, M.

    2012-07-01

    Airborne oblique cameras such as Fairchild T-3A were initially used for military reconnaissance in 30s. A modern professional digital oblique camera such as MIDAS (Multi-camera Integrated Digital Acquisition System) is used to generate lifelike three dimensional to the users for visualizations, GIS applications, architectural modeling, city modeling, games, simulators, etc. Oblique imagery provide the best vantage for accessing and reviewing changes to the local government tax base, property valuation assessment, buying & selling of residential/commercial for better decisions in a more timely manner. Oblique imagery is also used for infrastructure monitoring making sure safe operations of transportation, utilities, and facilities. Sanborn Mapping Company acquired one MIDAS from TrackAir in 2011. This system consists of four tilted (45 degrees) cameras and one vertical camera connected to a dedicated data acquisition computer system. The 5 digital cameras are based on the Canon EOS 1DS Mark3 with Zeiss lenses. The CCD size is 5,616 by 3,744 (21 MPixels) with the pixel size of 6.4 microns. Multiple flights using different camera configurations (nadir/oblique (28 mm/50 mm) and (50 mm/50 mm)) were flown over downtown Colorado Springs, Colorado. Boresight fights for 28 mm nadir camera were flown at 600 m and 1,200 m and for 50 mm nadir camera at 750 m and 1500 m. Cameras were calibrated by using a 3D cage and multiple convergent images utilizing Australis model. In this paper, the MIDAS system is described, a number of real data sets collected during the aforementioned flights are presented together with their associated flight configurations, data processing workflow, system calibration and quality control workflows are highlighted and the achievable accuracy is presented in some detail. This study revealed that the expected accuracy of about 1 to 1.5 GSD (Ground Sample Distance) for planimetry and about 2 to 2.5 GSD for vertical can be achieved. Remaining systematic

  15. Two-dimensional electronic spectroscopy with birefringent wedges

    Energy Technology Data Exchange (ETDEWEB)

    Réhault, Julien; Maiuri, Margherita; Oriana, Aurelio; Cerullo, Giulio [IFN-CNR, Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

    2014-12-15

    We present a simple experimental setup for performing two-dimensional (2D) electronic spectroscopy in the partially collinear pump-probe geometry. The setup uses a sequence of birefringent wedges to create and delay a pair of phase-locked, collinear pump pulses, with extremely high phase stability and reproducibility. Continuous delay scanning is possible without any active stabilization or position tracking, and allows to record rapidly and easily 2D spectra. The setup works over a broad spectral range from the ultraviolet to the near-IR, it is compatible with few-optical-cycle pulses and can be easily reconfigured to two-colour operation. A simple method for scattering suppression is also introduced. As a proof of principle, we present degenerate and two-color 2D spectra of the light-harvesting complex 1 of purple bacteria.

  16. Isolating active orogenic wedge deformation in the southern Subandes of Bolivia

    Science.gov (United States)

    Weiss, Jonathan R.; Brooks, Benjamin A.; Foster, James H.; Bevis, Michael; Echalar, Arturo; Caccamise, Dana; Heck, Jacob; Kendrick, Eric; Ahlgren, Kevin; Raleigh, David; Smalley, Robert; Vergani, Gustavo

    2016-08-01

    A new GPS-derived surface velocity field for the central Andean backarc permits an assessment of orogenic wedge deformation across the southern Subandes of Bolivia, where recent studies suggest that great earthquakes (>Mw 8) are possible. We find that the backarc is not isolated from the main plate boundary seismic cycle. Rather, signals from subduction zone earthquakes contaminate the velocity field at distances greater than 800 km from the Chile trench. Two new wedge-crossing velocity profiles, corrected for seasonal and earthquake affects, reveal distinct regions that reflect (1) locking of the main plate boundary across the high Andes, (2) the location of and loading rate at the back of orogenic wedge, and (3) an east flank velocity gradient indicative of décollement locking beneath the Subandes. Modeling of the Subandean portions of the profiles indicates along-strike variations in the décollement locked width (WL) and wedge loading rate; the northern wedge décollement has a WL of ~100 km while accumulating slip at a rate of ~14 mm/yr, whereas the southern wedge has a WL of ~61 km and a slip rate of ~7 mm/yr. When compared to Quaternary estimates of geologic shortening and evidence for Holocene internal wedge deformation, the new GPS-derived wedge loading rates may indicate that the southern wedge is experiencing a phase of thickening via reactivation of preexisting internal structures. In contrast, we suspect that the northern wedge is undergoing an accretion or widening phase primarily via slip on relatively young thrust-front faults.

  17. Support for coal slide workings

    Energy Technology Data Exchange (ETDEWEB)

    Alkhimovich, V.P.; Arsenov, N.S.; Boldin, B.M.; Donskov, Yu.I.; Lindenau, N.I.; Zubareva, V.A.

    1980-12-10

    The support for coal slide working includes carrying frames consisting of wooden supports in the form of a cage. In order to increase the durability of the support and prevent piping of the workings it is equipped with slabs with brackets which are mounted between adjacent carrying frames and which feature lugs and wedges for fixing the plates relative to the carrying frames and on the plate asymmetrically relative to its transverse axis.

  18. Vertebral body or intervertebral disc wedging: which contributes more to thoracolumbar kyphosis in ankylosing spondylitis patients?

    Science.gov (United States)

    Liu, Hao; Qian, Bang-Ping; Qiu, Yong; Wang, Yan; Wang, Bin; Yu, Yang; Zhu, Ze-Zhang

    2016-01-01

    Abstract Both vertebral body wedging and disc wedging are found in ankylosing spondylitis (AS) patients with thoracolumbar kyphosis. However, their relative contribution to thoracolumbar kyphosis is not fully understood. The objective of this study was to compare different contributions of vertebral and disc wedging to the thoracolumbar kyphosis in AS patients, and to analyze the relationship between the apical vertebral wedging angle and thoracolumbar kyphosis. From October 2009 to October 2013, a total of 59 consecutive AS patients with thoracolumbar kyphosis with a mean age of 38.1 years were recruited in this study. Based on global kyphosis (GK), 26 patients with GK < 70° were assigned to group A, and the other 33 patients with GK ≥ 70° were included in group B. Each GK was divided into disc wedge angles and vertebral wedge angles. The wedging angle of each disc and vertebra comprising the thoracolumbar kyphosis was measured, and the proportion of the wedging angle to the GK was calculated accordingly. Intergroup and intragroup comparisons were subsequently performed to investigate the different contributions of disc and vertebra to the GK. The correlation between the apical vertebral wedging angle and GK was calculated by Pearson correlation analysis. The duration of disease and sex were also recorded in this study. With respect to the mean disease duration, significant difference was observed between the two groups (P < 0.01). The wedging angle and wedging percentage of discs were significantly higher than those of vertebrae in group A (34.8° ± 2.5° vs 26.7° ± 2.7°, P < 0.01 and 56.6% vs 43.4%, P < 0.01), whereas disc wedging and disc wedging percentage were significantly lower than vertebrae in group B (37.6° ± 7.0° vs 50.1° ± 5.1°, P < 0.01 and 42.7% vs 57.3%, P < 0.01). The wedging of vertebrae was significantly higher in group B than in group A (50.1° ± 5.1° vs 26.7° ± 2.7°, P < 0

  19. Manipulating magnetic anisotropies of Co/MgO(001) ultrathin films via oblique deposition

    Science.gov (United States)

    Sheraz Ahmad, Syed; He, Wei; Tang, Jin; Zhang, Yong Sheng; Hu, Bo; Ye, Jun; Gul, Qeemat; Zhang, Xiang-Qun; Cheng, Zhao-Hua

    2016-09-01

    We present a systematic investigation of magnetic anisotropy induced by oblique deposition of Co thin films on MgO (001) substrates by molecular beam epitaxy at different deposition angles, i.e., 0°, 30°, 45°, 60°, and 75° with respect to the surface normal. Low energy electron diffraction (LEED), surface magneto-optical Kerr effect (SMOKE), and anisotropic magnetoresistance (AMR) setups were employed to investigate the magnetic properties of cobalt films. The values of in-plane uniaxial magnetic anisotropy (UMA) constant Ku and four-fold magnetocrystalline anisotropy constant K1 were derived from magnetic torque curves on the base of AMR results. It was found that the value of Ku increases with increasing deposition angle with respect to the surface normal, while the value of K1 remains almost constant for all the samples. Furthermore, by using MOKE results, the Ku values of the films deposited obliquely were also derived from the magnetization curves along hard axis. The results of AMR method were then compared with that of hard axis fitting method (coherent rotation) and found that both methods have almost identical values of UMA constant for each sample. Project supported by the Chinese Academy of Sciences-The World Academy of Sciences (CAS-TWAS) Fellowship Program, the National Basic Research Program of China (Grant Nos. 2015CB921403 and 2012CB933102), and the National Natural Science Foundation of China (Grant Nos. 51427801, 11374350, and 11274361).

  20. Frontal and oblique tectonics in the Brazilian Shield

    Institute of Scientific and Technical Information of China (English)

    GinaldoA.daC.Campanha; BenjamimBleydeBritoNeves

    2004-01-01

    The Brazilian shield was assembled from a few Archean and Paleoproterozoic cratonic nuclei surrounded by Pan-African-Brasiliano mobile belts of Neoproterozoic age. While some of these mobile belts display a typical frontal collision tectonic style, others are dominated by transcurrent regimes, clearly indicating oblique collisional systems. This paper is an attempt to determine the mean orientation of the principal horizontal compressive stresses for each mobile belt, considering either the frontal or oblique convergence character. From these general observations a scheme with WNW - ESE to NWSE trends of the main compressive stress is proposed. We suggest that this trend represents the mean displacement vectors, according to a coherent kinematic picture for the amalgamation of the West Gondwana during the final stages of convergence of the Brasiliano belts, where WNW-ESE to NW-SE are the main directions of final closure.

  1. Whistler damping at oblique propagation - Laminar shock precursors

    Science.gov (United States)

    Gary, S. P.; Mellott, M. M.

    1985-01-01

    This paper addresses the collisionless damping of whistlers observed as precursors standing upstream of oblique, low-Mach number terrestrial bow shocks. The linear theory of electromagnetic waves in a homogeneous Vlasov plasma with Maxwellian distribution functions and a magnetic field is considered. Numerical solutions of the full dispersion equation are presented for whistlers propagating at an arbitrary angle with respect to the magnetic field. It is demonstrated that electron Landau damping attenuates oblique whistlers and that the parameter which determines this damping is beta-e. In a well-defined range of parameters, this theory provides damping lengths which are the same order of magnitude as those observed. Thus electron Landau damping is a plausible process in the dissipation of upstream whistlers. Nonlinear plasma processes which may contribute to precursor damping are also discussed, and criteria for distinguishing among these are described.

  2. Oblique Laminar-Turbulent Interfaces in Plane Shear Flows

    Science.gov (United States)

    Duguet, Yohann; Schlatter, Philipp

    2013-01-01

    Localized structures such as turbulent stripes and turbulent spots are typical features of transitional wall-bounded flows in the subcritical regime. Based on an assumption for scale separation between large and small scales, we show analytically that the corresponding laminar-turbulent interfaces are always oblique with respect to the mean direction of the flow. In the case of plane Couette flow, the mismatch between the streamwise flow rates near the boundaries of the turbulence patch generates a large-scale flow with a nonzero spanwise component. Advection of the small-scale turbulent fluctuations (streaks) by the corresponding large-scale flow distorts the shape of the turbulence patch and is responsible for its oblique growth. This mechanism can be easily extended to other subcritical flows such as plane Poiseuille flow or Taylor-Couette flow.

  3. Impact of an oblique breaking wave on a wall

    CERN Document Server

    Shu, Jian-Jun

    2014-01-01

    The intention of this paper is to study impact force of an oblique-angled slamming wave acting on a rigid wall. In the present study the analytical approach is pursued based on a technique proposed by the author. A nonlinear theory in the context of potential flow is presented for determining accurately the free-surface profiles immediately after an oblique breaking wave impingement on the rigid vertical wall that suddenly starts from rest. The small-time expansion is taken as far as necessary to include the accelerating effect. The analytical solutions for the free-surface elevation are derived up to the third order. The results derived in this paper are of particular interest to the marine and offshore engineering industries, which will find the information useful for the design of ships, coastal and offshore.

  4. Tree level unitarity and finiteness of electroweak oblique corrections

    CERN Document Server

    Nagai, Ryo

    2015-01-01

    We study perturbative unitarity and electroweak oblique corrections in the electroweak symmetry breaking models including an arbitrary number of neutral Higgs bosons. Requiring the perturbative unitarity of the high energy scattering amplitudes of weak gauge bosons and the neutral Higgs bosons at tree level, we obtain a set of conditions among the Higgs coupling strengths (unitarity sum rules). It is shown that the unitarity sum rules require the tree level rho parameter to be 1 if there are only neutral Higgs bosons. Moreover, we find that the one-loop finiteness of the electroweak oblique corrections is automatically guaranteed once the unitarity sum rules are imposed among the Higgs coupling strengths. Applying the unitarity sum rules, we obtain severe constraints on the mass of the second lightest neutral Higgs boson and the lightest neutral Higgs (a 125GeV Higgs) coupling strength from the results of the electroweak precision tests as well as the unitarity.

  5. Oblique Alfvén instabilities driven by compensated currents

    Energy Technology Data Exchange (ETDEWEB)

    Malovichko, P. [Main Astronomical Observatory, NASU, Kyiv (Ukraine); Voitenko, Y.; De Keyser, J., E-mail: voitenko@oma.be [Solar-Terrestrial Centre of Excellence, Space Physics Division, Belgian Institute for Space Aeronomy, Ringlaan-3-Avenue Circulaire, B-1180 Brussels (Belgium)

    2014-01-10

    Compensated-current systems created by energetic ion beams are widespread in space and astrophysical plasmas. The well-known examples are foreshock regions in the solar wind and around supernova remnants. We found a new oblique Alfvénic instability driven by compensated currents flowing along the background magnetic field. Because of the vastly different electron and ion gyroradii, oblique Alfvénic perturbations react differently on the currents carried by the hot ion beams and the return electron currents. Ultimately, this difference leads to a non-resonant aperiodic instability at perpendicular wavelengths close to the beam ion gyroradius. The instability growth rate increases with increasing beam current and temperature. In the solar wind upstream of Earth's bow shock, the instability growth time can drop below 10 proton cyclotron periods. Our results suggest that this instability can contribute to the turbulence and ion acceleration in space and astrophysical foreshocks.

  6. Effects of varying obliquity on Martian sublimation thermokarst landforms

    Science.gov (United States)

    Dundas, Colin M.

    2017-01-01

    Scalloped depressions in the Martian mid-latitudes are likely formed by sublimation of ice-rich ground. The stability of subsurface ice changes with the planetary obliquity, generally becoming less stable at lower axial tilt. As a result, the relative rates of sublimation and creep change over time. A landscape evolution model shows that these variations produce internal structure in scalloped depressions, commonly in the form of arcuate ridges, which emerge as depressions resume growth after pausing or slowing. In other scenarios, the formation of internal structure is minimal. Significant uncertainties in past climate and model parameters permit a range of scenarios. Ridges observed in some Martian scalloped depressions could date from obliquity lows or periods of low ice stability occurring <5 Ma, suggesting that the pits are young features and may be actively evolving.

  7. Competing magnetic anisotropies in obliquely deposited thin permalloy film

    Energy Technology Data Exchange (ETDEWEB)

    Belyaev, B.A. [Siberian Federal University, 79, pr. Svobodnyi, Krasnoyarsk 660041 (Russian Federation); Kirensky Institute of Physics, Siberian Branch of the Russian Academy of Sciences, 50/38, Akademgorodok, Krasnoyarsk 660036 (Russian Federation); Reshetnev Siberian State Aerospace University, 31, pr. Imeni Gazety “Krasnoyarskii Rabochii”, Krasnoyarsk 660014 (Russian Federation); Izotov, A.V. [Siberian Federal University, 79, pr. Svobodnyi, Krasnoyarsk 660041 (Russian Federation); Kirensky Institute of Physics, Siberian Branch of the Russian Academy of Sciences, 50/38, Akademgorodok, Krasnoyarsk 660036 (Russian Federation); Solovev, P.N., E-mail: platon.solovev@gmail.com [Siberian Federal University, 79, pr. Svobodnyi, Krasnoyarsk 660041 (Russian Federation)

    2016-01-15

    Distribution of the magnetic anisotropy in thin film prepared by thermal vacuum oblique deposition of permalloy with small off-normal angle of incident in the presence of an external magnetic field has been studied by ferromagnetic resonance technique. On local area of the sample, a mutual compensation of near orthogonal in-plane uniaxial magnetic anisotropies induced by oblique deposition and by applied magnetic field has been found. Moreover, in addition to the uniaxial (twofold) magnetic anisotropy, fourfold and sixfold magnetic anisotropies have been observed in the sample. To explain the obtained high-order anisotropies, we assumed that the sample has exchange coupled adjacent regions or phases with different parameters of magnetic anisotropy. The results of the micromagnetic analysis of a two-layer model of the sample confirm the hypothesis.

  8. Oblique drop impact onto a deep liquid pool

    CERN Document Server

    Gielen, Marise V; Benschop, Jos; Riepen, Michel; Voronina, Victoria; Lohse, Detlef; Snoeijer, Jacco H; Versluis, Michel; Gelderblom, Hanneke

    2016-01-01

    Oblique impact of drops on a solid or liquid surface is frequently observed in nature. Most studies on drop impact and splashing, however, focus on perpendicular impact. Here, we study oblique impact onto a deep liquid pool, where we quantify the splashing threshold, maximal cavity dimensions and cavity collapse by high-speed imaging above and below the water surface. Three different impact regimes are identified: smooth deposition onto the pool, splashing in the direction of impact only, and splashing in all directions. We provide scaling arguments that delineate these regimes by accounting for drop impact angle and Weber number. The angle of the axis of the cavity created below the water surface follows the impact angle of the drop independent of the Weber number, while cavity depth and its displacement with respect to the impact position depend on the Weber number. Weber number dependency of both the cavity depth and displacement is modeled using an energy argument.

  9. Mechanism of bone incorporation of beta-TCP bone substitute in open wedge tibial osteotomy in patients.

    NARCIS (Netherlands)

    Gaasbeek, R.D.A.; Toonen, H.G.; Heerwaarden, R.J. van; Buma, P.

    2005-01-01

    A histological study was performed of bone biopsies from 16 patients (17 biopsies) treated with open wedge high tibial osteotomies for medial knee osteoarthritis. The open wedge osteotomies were filled with a wedge of osteoconductive beta tricalcium phosphate (beta-TCP) ceramic bone replacement. At

  10. Pitch angle scattering of energetic particles by oblique whistler waves

    Science.gov (United States)

    Inan, U. S.; Bell, T. F.

    1991-01-01

    First order cyclotron or Landau resonant pitch angle scattering of electrons by oblique whistler waves propagating at large angles to the ambient field are found to be at least as large as that due to parallel propagating waves. Commonly observed precipitation of more than 40 keV electrons in association with ducted whistlers may thus be accompanied by substantial fluxes of lower energy (10 eV-40 keV) electrons precipitated by the nonducted components.

  11. Obliquity of the Stapes in Otosclerosis: A New Radiological Sign

    Directory of Open Access Journals (Sweden)

    Anand, Veluswamy

    2016-03-01

    Full Text Available Introduction Observing the obliquity of stapes by closely scrutinizing the HRCT temporal bone in otosclerosis revealed a reliable and consistent finding. This finding can add to the existing radiological criteria in diagnosis of otosclerosis. Objective The objective of this study is to establish the obliquity of stapes in otosclerosis by radiological measurements using HRCT temporal bone by comparing: (a the distance between the horizontal (tympanic segment of facial nerve and stapes head in otosclerotic ears (study group with non-otosclerotic ears (control group; and (b the angle subtended by stapes with promontory in the study and control groups. Methods This is a prospective study performed after the institutional Ethics Committee clearance (IEC 3/2013. Results An increased mean distance between the horizontal segment of facial nerve and stapes head in otosclerotic patients (i.e., 2.49mm +/− 0.24mm SD, when compared with the non-otosclerotic patients (i.e., 1.46mm +/− 0.16mm SD is noted. There is a change in angle (i.e., 64.550 +/− 7.190 SD subtended by the stapes toward the promontory in otosclerotic ears when compared with that of controls (i.e., 99.700 +/− 40 SD. We applied the Mann-Whitney U non-parametric test and considered p value of < 0.0001 highly significant. Conclusions Obliquity of stapes in otosclerosis referred to as a “Pisa” sign by the senior author has diagnostic value as a new radiological sign in imaging of otosclerosis. This obliquity explains the torsional effect of otosclerosis on the ossicular chain. The findings correlate with late complications and failures in stapes surgery.

  12. D Model Generation Using Oblique Images Acquired by Uav

    Science.gov (United States)

    Lingua, A.; Noardo, F.; Spanò, A.; Sanna, S.; Matrone, F.

    2017-07-01

    In recent years, many studies revealed the advantages of using airborne oblique images for obtaining improved 3D city models (including façades and building footprints). Here the acquisition and use of oblique images from a low cost and open source Unmanned Aerial Vehicle (UAV) for the 3D high-level-of-detail reconstruction of historical architectures is evaluated. The critical issues of such acquisitions (flight planning strategies, ground control points distribution, etc.) are described. Several problems should be considered in the flight planning: best approach to cover the whole object with the minimum time of flight; visibility of vertical structures; occlusions due to the context; acquisition of all the parts of the objects (the closest and the farthest) with similar resolution; suitable camera inclination, and so on. In this paper a solution is proposed in order to acquire oblique images with one only flight. The data processing was realized using Structure-from-Motion-based approach for point cloud generation using dense image-matching algorithms implemented in an open source software. The achieved results are analysed considering some check points and some reference LiDAR data. The system was tested for surveying a historical architectonical complex: the "Sacro Mo nte di Varallo Sesia" in north-west of Italy. This study demonstrates that the use of oblique images acquired from a low cost UAV system and processed through an open source software is an effective methodology to survey cultural heritage, characterized by limited accessibility, need for detail and rapidity of the acquisition phase, and often reduced budgets.

  13. Primary and secondary overacting inferior oblique muscles: an ultrastructural study.

    OpenAIRE

    Meyer, E.; Ludatscher, R. M.; Zonis, S

    1984-01-01

    Biopsy material from primary and secondary overacting inferior oblique muscles were examined by light and electron microscopy. Most muscle fibres were in different stages of atrophy. A high variation of alterations was encountered in all muscles. The most striking abnormalities were huge accumulations of mitochondria and muscle vacuolisation related mainly to the enlargement of the tubules of sarcoplasmic reticulum. The mitochondrial aggregates and vacuolisation occupied more muscle surface i...

  14. Optimal fixation of oblique scaphoid fractures: a cadaver model.

    Science.gov (United States)

    Luria, Shai; Lenart, Lado; Lenart, Borut; Peleg, Eran; Kastelec, Matej

    2012-07-01

    Acute scaphoid fractures are commonly fixed with headless cannulated screws positioned in the center of the proximal fragment. Central placement of the screw may be difficult and may violate the scaphotrapezial joint. We hypothesize that placement of the screw through the scaphoid tuberosity will achieve perpendicular fixation of an oblique waist fracture and result in more stable fixation than a screw in the center of the proximal fragment. We designed oblique osteotomies for 8 matched pairs of cadaver scaphoids and fixed each specimen with a headless cannulated screw. In 1 specimen, we positioned the screw at the center of the proximal fragment; we placed its matched pair perpendicular to the fracture. The perpendicular screw was directed through the scaphoid tuberosity. We placed the specimen under the increasing load of a pneumatically driven plunger. We compared stiffness, load, distance at failure, and mechanism of failure between the central and perpendicular screw groups. We found no difference between groups. Stiffness was identical in both groups (131 N/mm) and load to failure was similar (central screw, 137 N vs perpendicular screw, 148 N). In this biomechanical model of an unstable scaphoid fracture, we found that similar stability of fixation had been achieved with a screw perpendicular to the fracture plane with entry through the tuberosity, compared with a screw in a central position in the proximal fragment. This study suggests that placing the screw through the tuberosity, perpendicular to a short oblique fracture, will not impair fixation stability. Percutaneous fixation of scaphoid fractures has become popular although it is technically challenging. An easier distal approach through the tuberosity, without violating the scaphotrapezial joint, may not impair the fixation stability of an oblique fracture. Copyright © 2012 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  15. The oblique S parameter in higgsless electroweak models

    CERN Document Server

    Rosell, Ignasi

    2012-01-01

    We present a one-loop calculation of the oblique S parameter within Higgsless models of electroweak symmetry breaking. We have used a general effective Lagrangian with at most two derivatives, implementing the chiral symmetry breaking SU(2)_L x SU(2)_R -> SU(2)_{L+R} with Goldstones, gauge bosons and one multiplet of vector and axial-vector resonances. The estimation is based on the short-distance constraints and the dispersive approach proposed by Peskin and Takeuchi.

  16. Effect of bilateral superior oblique split lengthening on torsion

    Directory of Open Access Journals (Sweden)

    Jitendra Jethani

    2015-01-01

    Full Text Available Introduction: Superior oblique split lengthening (SOSL is done for weakening of superior oblique. It corrects the superior oblique overaction (SOOA and A pattern. Its effect on the torsion of the eye is not known. We present our data on the effect of this particular procedure on torsion. Materials and Methods: We did a study of 16 patients (32 eyes who underwent bilateral SOSL and compared the disc foveal angle (DFA preoperatively and postoperatively. The split lengthening was done from 4 mm to 7 mm depending upon the overaction of superior oblique. Results: The mean age was 15.3 ± 8.4 years. Mean preoperative DFA in the right eye (RE was −3.9° and in the left eye (LE was −2.9°. Mean postoperative DFA in RE was 0.2° and in LE was 0.9°. The mean change in the DFA for RE was 4.1° ± 1.3° and for LE was 3.8° ± 1.2°. All the patients were aligned horizontally within 6 prism diopter and no pattern and no diplopia postoperatively. The A pattern was corrected in all the patient postsurgery. For each mm of surgery, an improvement of 0.8° was seen in the DFA. Conclusion: We report the effect of SOSL on torsion. The SOSL reduces intorsion postsurgery and is, therefore, a valuable procedure in SOOA where both pattern and in torsion needs to be corrected.

  17. Models of Warm Jupiter Atmospheres: Observable Signatures of Obliquity

    Science.gov (United States)

    Rauscher, Emily

    2017-09-01

    We present three-dimensional atmospheric circulation models of a hypothetical “warm Jupiter” planet, for a range of possible obliquities from 0° to 90°. We model a Jupiter-mass planet on a 10 day orbit around a Sun-like star, since this hypothetical planet sits at the boundary between planets for which we expect that tidal forces should have aligned their rotation axes with their orbital axes (i.e., ones with zero obliquity) and planets whose timescale for tidal alignment is longer than the typical age of an exoplanet system. In line with observational progress, which is pushing atmospheric characterization for planets on longer orbital periods, we calculate the observable signatures of obliquity for a transiting warm Jupiter: in orbital phase curves of thermal emission and in the hemispheric flux gradients that could be measured by eclipse mapping. For both of these predicted measurements, the signal that we would see depends strongly on our viewing geometry relative to the orientation of the planet’s rotation axis, and we thoroughly identify the degeneracies that result. We compare these signals to the predicted sensitivities of current and future instruments and determine that the James Webb Space Telescope should be able to constrain the obliquities of nearby warm Jupiters to be small (if ≤slant 10^\\circ ) or to directly measure them if significantly non-zero (≥slant 30^\\circ ) using the technique of eclipse mapping. For a bright target and assuming photon-limited precision, this could be done with a single secondary eclipse observation.

  18. Crustal Rock: Recorder of Oblique Impactor Meteoroid Trajectories

    Science.gov (United States)

    Ahrens, Thomas J.

    2005-07-01

    Oblique impact experiments in which 2g lead bullets strike samples of San Marcos granite and Bedford limestone at 1.2 km/s induce zones of increased crack density (termed shocked damage) which result in local decreases in bulk and shear moduli that results in maximum decreases of 30-40% in compressional and shear wave velocity (Budianski and O'Connell). Initial computer simulation of oblique impacts of meteorites (Pierazzo and Melosh) demonstrate the congruence of peak shock stress trajectory with the pre-impact meteoroid trajectory. We measure (Ai and Ahrens) via multi-beam (˜ 300) tomographic inversion, the sub-impact surface distribution of damage from the decreases in compressional wave velocity in the 20 x 20 x 15 cm rock target. The damage profiles for oblique impacts are markedly asymmetric (in plane of pre-impact meteoroid pre-impact trajectory) beneath the nearly round excavated craters. Thus, meteorite trajectory information can be recorded in planetary surfaces. Asymmetric sub-surface seismic velocity profiles beneath the Manson (Iowa) and Ries (Germany) impact craters demonstrate that pre-impact meteoroid trajectories records remain accessible for at least ˜ 10 ^ 8 years.

  19. USE OF VERTICAL AERIAL IMAGES FOR SEMI-OBLIQUE MAPPING

    Directory of Open Access Journals (Sweden)

    D. Poli

    2017-05-01

    Full Text Available The paper proposes a methodology for the use of the oblique sections of images from large-format photogrammetric cameras, by exploiting the effect of the central perspective geometry in the lateral parts of the nadir images (“semi-oblique” images. The point of origin of the investigation was the execution of a photogrammetric flight over Norcia (Italy, which was seriously damaged after the earthquake of 30/10/2016. Contrary to the original plan of oblique acquisitions, the flight was executed on 15/11/2017 using an UltraCam Eagle camera with focal length 80 mm, and combining two flight plans, rotated by 90º (“crisscross” flight. The images (GSD 5 cm were used to extract a 2.5D DSM cloud, sampled to a XY-grid size of 2 GSD, a 3D point clouds with a mean spatial resolution of 1 GSD and a 3D mesh model at a resolution of 10 cm of the historic centre of Norcia for a quantitative assessment of the damages. From the acquired nadir images the “semi-oblique” images (forward, backward, left and right views could be extracted and processed in a modified version of GEOBLY software for measurements and restitution purposes. The potential of such semi-oblique image acquisitions from nadir-view cameras is hereafter shown and commented.

  20. Titan's interior constrained from its obliquity and tidal Love number

    Science.gov (United States)

    Baland, Rose-Marie; Coyette, Alexis; Yseboodt, Marie; Beuthe, Mikael; Van Hoolst, Tim

    2016-04-01

    In the last few years, the Cassini-Huygens mission to the Saturn system has measured the shape, the obliquity, the static gravity field, and the tidally induced gravity field of Titan. The large values of the obliquity and of the k2 Love number both point to the existence of a global internal ocean below the icy crust. In order to constrain interior models of Titan, we combine the above-mentioned data as follows: (1) we build four-layer density profiles consistent with Titan's bulk properties; (2) we determine the corresponding internal flattening compatible with the observed gravity and topography; (3) we compute the obliquity and tidal Love number for each interior model; (4) we compare these predictions with the observations. Previously, we found that Titan is more differentiated than expected (assuming hydrostatic equilibrium), and that its ocean is dense and less than 100 km thick. Here, we revisit these conclusions using a more complete Cassini state model, including: (1) gravitational and pressure torques due to internal tidal deformations; (2) atmosphere/lakes-surface exchange of angular momentum; (3) inertial torque due to Poincaré flow. We also adopt faster methods to evaluate Love numbers (i.e. the membrane approach) in order to explore a larger parameter space.

  1. Oblique reconstruction of the cruciate ligaments on computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Ihara, Hidetoshi; Nishino, Koshi; Koga, Masayuki; Kitakata, Akira; Deya, Keizo; Nakagawa, Hiroto

    1984-12-01

    Optimal positioning where the entire longitudinal axis of the cruciate ligaments could be demonstrated on computed tomography was discovered by using an amputated knee and was applied clinically. To demonstrate the anterior cruciate ligament, the patient was positioned on the table with the hip flexed, abducted, externally rotated and knee flexed at a 110-140 degrees angle. For the posterior cruciate ligament, the patient was placed in a prone position on the table with the knee flexed at a 50 degrees angle. These positions, especially the one for the anterior cruciate ligament, were difficult for some patients with gonalgia or limited range of motion. Reconstruction in the oblique planes was studied for those patients by using an amputated knee and quasi-ligament made of gum. Clinically, an axial image was obtained by the simple position of the patient lying prone on the table with knee extended. Oblique reconstruction was made from the axial images and this reconstructed image also demonstrated the entire longitudinal axis of the ligament. The rupture of the cruciate ligaments could be assessed by the reconstructed image in the oblique plane. (author).

  2. Evaluation of chest injury mechanisms in nearside oblique frontal impacts.

    Science.gov (United States)

    Iraeus, Johan; Lindquist, Mats; Wistrand, Sofie; Sibgård, Elin; Pipkorn, Bengt

    2013-01-01

    Despite the use of seat belts and modern safety systems, many automobile occupants are still seriously injured or killed in car crashes. Common configurations in these crashes are oblique and small overlap frontal impacts that often lead to chest injuries.To evaluate the injury mechanism in these oblique impacts, an investigation was carried out using mathematical human body model simulations. A model of a simplified vehicle interior was developed and validated by means of mechanical sled tests with the Hybrid III dummy. The interior model was then combined with the human body model THUMS and validated by means of mechanical PMHS sled tests. Occupant kinematics as well as rib fracture patterns were predicted with reasonable accuracy.The final model was updated to conform to modern cars and a simulation matrix was run. In this matrix the boundary conditions, ΔV and PDOF, were varied and rib fracture risk as a function of the boundary conditions was evaluated using a statistical framework.In oblique frontal impacts, two injury producing mechanisms were found; (i) diagonal belt load and (ii) side structure impact. The second injury mechanism was found for PDOFs of 25°-35°, depending on ΔV. This means that for larger PDOFs, less ΔV is needed to cause a serious chest injury.

  3. Mending Milankovitch theory: obliquity amplification by surface feedbacks

    Directory of Open Access Journals (Sweden)

    C. R. Tabor

    2013-07-01

    Full Text Available Milankovitch theory states that orbitally induced changes in high-latitude summer insolation dictate the waxing and waning of ice-sheets. Accordingly, precession should dominate the ice-volume response because it most strongly modulates summer insolation intensity. However, Early Pleistocene (2.6–0.8 Ma ice-volume proxy records vary almost exclusively at the frequency of the obliquity cycle. To explore this paradox, we use an Earth system model coupled with a dynamic ice-sheet to separate the climate responses to idealized transient orbits of obliquity and precession that maximize insolation changes. Our results show that positive surface albedo feedbacks between high-latitude annual-mean insolation, ocean heat flux and sea-ice coverage, and boreal forest/tundra exchange enhance the ice-volume response to obliquity forcing relative to precession forcing. These surface feedbacks, in combination with modulation of the precession cycle power by eccentricity, may explain the dominantly 41 kyr cycles in global ice volume of the Early Pleistocene.

  4. Limited oblique corpectomy for treatment of ossified posterior longitudinal ligament

    Directory of Open Access Journals (Sweden)

    Goel A

    2005-01-01

    Full Text Available Objective: We present our experience with treating four cases with ossified posterior longitudinal ligaments (OPLL causing cervical cord compression by limited oblique and strategic corpectomy. Materials and results: Four patients with cervical OPLL were treated by the discussed technique during the period of October 2000 to January 2005. The ages of the patients ranged from 46 to 72 years. All patients presented with symptoms of progressively increasing myelopathy. Two patients had four level OPLL and two patients had two level OPLL. Surgery involved anterior cervical exposure and partial oblique corpectomy, which was essentially an extended midline and lateral undercutting of the body. The procedure provided a wide exposure for resection of the OPLL. No metal instrumentation or any other kind of fixation procedure was simultaneously carried out and there was no need for postoperative cervical immobilization. During the period of follow up that ranged from 6 month to 5 years (mean: 33 months all the four patients have shown sustained clinical improvement. Neuroimaging studies confirmed satisfactory anatomical cervical cord decompression in all patients. Conclusions: The technique of oblique and strategic corpectomy provided a wide exposure for resection of the OPLL and preserved the stability of the region.

  5. Verification of Varian Enhanced Dynamic Wedge implementation in masterplan treatment planning system.

    Science.gov (United States)

    Pasquino, Massimo; Casanova Borca, Valeria; Tofani, Santi; Ozzello, Franca

    2009-04-22

    This paper investigates the accuracy of the two available calculation algorithms of the Oncentra MasterPlan three-dimensional treatment planning system (TPS)-- the pencil beam method and collapsed-cone convolution--in modeling the Varian enhanced dynamic wedge (EDW). Measurements were carried out for a dual high energy (6-15 MV) Varian DHX-S linear accelerator using ionization chambers for beam axis measurements (wedge factors and depth doses), film dosimetry for off-axis dose profiles measurements, and a diode matrix detector for two dimensional absolute dose distributions. Using both calculation algorithms, different configuration of symmetric and asymmetric fields varying the wedge's angle were tested. Accuracy of the treatment planning system was evaluated in terms of percentage differences between measured and calculated values for wedge factors, depth doses, and profiles. As far as the absolute dose distribution was concerned, the gamma index method (Low et al.) was used with 3% and 3 mm as acceptance criteria for dose difference and distance-to-agreement, respectively. Wedge factors and percentage depth doses were within 1% deviation between calculated and measured values. The comparison of measured and calculated dose profiles shows that the Van Dyk's acceptance criteria (Van Dyk et al.) are generally met; a disagreement can be noted for large wedge angles and field size limited to the low dose-low gradient region only. The 2D absolute dose distribution analysis confirms the good accuracy of the two calculation algorithms in modeling the enhanced dynamic wedge.

  6. Biomechanical effects of lateral and medial wedge insoles on unilateral weight bearing.

    Science.gov (United States)

    Sawada, Tomonori; Kito, Nobuhiro; Yukimune, Masaki; Tokuda, Kazuki; Tanimoto, Kenji; Anan, Masaya; Takahashi, Makoto; Shinkoda, Koichi

    2016-01-01

    [Purpose] Lateral wedge insoles reduce the peak external knee adduction moment and are advocated for patients with knee osteoarthritis. However, some patients demonstrate adverse biomechanical effects with treatment. In this study, we examined the immediate effects of lateral and medial wedge insoles under unilateral weight bearing. [Subjects and Methods] Thirty healthy young adults participated in this study. The subjects were assessed by using the foot posture index, and were divided into three groups: normal foot, pronated foot, and supinated foot groups. The knee adduction moment and knee-ground reaction force lever arm under the studied conditions were measured by using a three-dimensional motion capture system and force plates. [Results] In the normal and pronated groups, the change in knee adduction moment significantly decreased under the lateral wedge insole condition compared with the medial wedge insole condition. In the normal group, the change in the knee-ground reaction force lever arm also significantly decreased under the lateral wedge insole condition than under the medial wedge insole condition. [Conclusion] Lateral wedge insoles significantly reduced the knee adduction moment and knee-ground reaction force lever arm during unilateral weight bearing in subjects with normal feet, and the biomechanical effects varied according to individual foot alignment.

  7. Bivergent thrust wedges surrounding oceanic island arcs: Insight from observations and sandbox models of the northeastern caribbean plate

    Science.gov (United States)

    ten Brink, U.S.; Marshak, S.; Granja, Bruna J. L.

    2009-01-01

    At several localities around the world, thrust belts have developed on both sides of oceanic island arcs (e.g., Java-Timor, Panama, Vanuatu, and the northeastern Caribbean). In these localities, the overall vergence of the backarc thrust belt is opposite to that of the forearc thrust belt. For example, in the northeastern Caribbean, a north-verging accretionary prism lies to the north of the Eastern Greater Antilles arc (Hispaniola and Puerto Rico), whereas a south-verging thrust belt called the Muertos thrust belt lies to the south. Researchers have attributed such bivergent geometry to several processes, including: reversal of subduction polarity; subduction-driven mantle flow; stress transmission across the arc; gravitational spreading of the arc; and magmatic inflation within the arc. New observations of deformational features in the Muertos thrust belt and of fault geometries produced in sandbox kinematic models, along with examination of published studies of island arcs, lead to the conclusion that the bivergence of thrusting in island arcs can develop without reversal of subduction polarity, without subarc mantle flow, and without magmatic inflation. We suggest that the Eastern Greater Antilles arc and comparable arcs are simply crustalscale bivergent (or "doubly vergent") thrust wedges formed during unidirectional subduction. Sandbox kinematic modeling suggests, in addition, that a broad retrowedge containing an imbricate fan of thrusts develops only where the arc behaves relatively rigidly. In such cases, the arc acts as a backstop that transmits compressive stress into the backarc region. Further, modeling shows that when arcs behave as rigid blocks, the strike-slip component of oblique convergence is accommodated entirely within the prowedge and the arc-the retrowedge hosts only dip-slip faulting ("frontal thrusting"). The existence of large retrowedges and the distribution of faulting in an island arc may, therefore, be evidence that the arc is

  8. Surgical Results in Unilateral Superior Oblique Muscle Palsy

    Directory of Open Access Journals (Sweden)

    Aylin Tenlik

    2014-08-01

    Full Text Available Objectives: To evaluate the surgical treatments and results of the patients with superior oblique muscle palsy (SOMP. Materials and Methods: Clinical charts of the patients with unilateral SOMP who were operated in our clinic between 1999 and 2009 were evaluated retrospectively. Patients’ demographics, preoperative signs, surgical procedure, complications, and final results were recorded. Results: Thirty-seven patients were included in the study, [21 (59% male, 15 (41% female]. The mean age was 20.6 years at the time of operation. The mean time interval between diagnosis and operation was 7.3 years. Postoperative follow-up period was 2.04 (ranging 1-10 years. Diplopia was determined in seven (18.9% patients, and abnormal head position in 36 (97.3% patients. Only inferior oblique tenotomy with distal muscle resection was performed in 25 patients. In addition, five patients had recession of the contralateral inferior rectus muscle and two patients had recession of the ipsilateral superior rectus muscle additional to inferior oblique tenotomy. Abnormal head position was completely improved in all of the patients postoperatively. The preoperative average score of the inferior oblique muscle (IOM overaction was +3.3±0.8, and postoperative overaction was found in only two patients (+1.5. There was statistically significant difference between the two periods (p<0.001. The average score of the superior oblique muscle hypofunction was -2.18 preoperatively, and in only three patients, the score was found -1.0 postoperatively. Difference between the two periods was statistically significant (p<0.001. While the preoperative average vertical deviation was 22 PD in primary position, none of the patients had hyperdeviation postoperatively. Diplopia was resolved in all seven affected patients postoperatively. Contralateral IOM hyperfunction was the most common complication (13.5%. Adherence syndrome was seen in none of the patients. Conclusion: It was found

  9. Controls on oxygen dynamics in a riverine salt-wedge estuary - a three-dimensional model of the Yarra River estuary, Australia

    Science.gov (United States)

    Bruce, L. C.; Cook, P. L. M.; Teakle, I.; Hipsey, M. R.

    2013-07-01

    Oxygen depletion in estuarine waters is an important factor governing water quality and ecological health. A complex and dynamic balance of physical and biogeochemical factors drive the extent and persistence of hypoxia and anoxia making it difficult to predict. An increased understanding of the effect of changing flow regimes and temperature on patterns of estuarine oxygen depletion is required to support ongoing management. Coupled physical and biogeochemical models have been applied to study the interaction of physical processes and seasonal hypoxia, however, application to riverine estuaries with tight curvature and more sporadic periods of oxygen depletion is rare. In this study we apply a finite volume 3-D hydrodynamic-biogeochemical model (TUFLOW-FV-FABM) to the Yarra River estuary, Australia, in order to predict the extent of salt-wedge intrusion and consequent patterns of oxygen depletion. The predictive capacity of the model was evaluated using a series of model verification metrics and the results evaluated to determine the dominant mechanisms affecting salt-wedge position and the extent and persistence of anoxia and hypoxia. Measures of model fit indicated that the model reasonably captured the strength of stratification and the position and extent of the salt wedge (r2 ~ 0.74). The extent of the salt wedge intrusion was controlled by riverine flow and the strength of stratification or mixing dominated by topographical features corresponding to areas of tight curvature ("horseshoe" bends). The model predicted that the extent of anoxic waters generally mimicked the extent of the salt wedge (r2 ~ 0.65) increasing during periods of low flow and reduced following episodic high flow events. The results showed two sporadically isolated "hot spots" of anoxia, the first downstream of the horseshoe bend and the second downstream of a sill. Simulated oxygen concentrations indicated that whilst a threshold salt wedge intrusion was a requirement of oxygen depletion

  10. Controls on oxygen dynamics in a riverine salt-wedge estuary – a three-dimensional model of the Yarra River estuary, Australia

    Directory of Open Access Journals (Sweden)

    L. C. Bruce

    2013-07-01

    Full Text Available Oxygen depletion in estuarine waters is an important factor governing water quality and ecological health. A complex and dynamic balance of physical and biogeochemical factors drive the extent and persistence of hypoxia and anoxia making it difficult to predict. An increased understanding of the effect of changing flow regimes and temperature on patterns of estuarine oxygen depletion is required to support ongoing management. Coupled physical and biogeochemical models have been applied to study the interaction of physical processes and seasonal hypoxia, however, application to riverine estuaries with tight curvature and more sporadic periods of oxygen depletion is rare. In this study we apply a finite volume 3-D hydrodynamic-biogeochemical model (TUFLOW-FV–FABM to the Yarra River estuary, Australia, in order to predict the extent of salt-wedge intrusion and consequent patterns of oxygen depletion. The predictive capacity of the model was evaluated using a series of model verification metrics and the results evaluated to determine the dominant mechanisms affecting salt-wedge position and the extent and persistence of anoxia and hypoxia. Measures of model fit indicated that the model reasonably captured the strength of stratification and the position and extent of the salt wedge (r2 ~ 0.74. The extent of the salt wedge intrusion was controlled by riverine flow and the strength of stratification or mixing dominated by topographical features corresponding to areas of tight curvature ("horseshoe" bends. The model predicted that the extent of anoxic waters generally mimicked the extent of the salt wedge (r2 ~ 0.65 increasing during periods of low flow and reduced following episodic high flow events. The results showed two sporadically isolated "hot spots" of anoxia, the first downstream of the horseshoe bend and the second downstream of a sill. Simulated oxygen concentrations indicated that whilst a threshold salt wedge intrusion was a requirement

  11. Combined obliquity and precession pacing of western Pacific Intertropical Convergence Zone over the past 282,000 years

    Science.gov (United States)

    Shen, C. C.; Yi, L.; Lo, L.; Shi, Z.; Wei, K. Y.; Chou, C. J.; Chen, Y. C.; Chuang, C. K.; WU, C. C.; Mii, H. S.; Amakawa, H.; Burr, G.; Lee, S. Y.; DeLong, K. L.; Elderfield, H.

    2015-12-01

    The Intertropical convergence Zone (ITCZ) encompasses the heaviest rain belt on Earth. Few direct long-term records, especially in the Pacific, limit our understanding of long-term natural variability necessary to predict future ITCZ changes. Here we present a tropical precipitation record from the Southern Hemisphere covering the past 282,000 years, inferred from of rare earth elements (REEs) to Ca ratios in the planktonic foraminifer Globigerinoides ruber shell calcite, of a marine sedimentary core MD05-2925 (9o20.60'S, 151o27.54'E; water depth 1661 m), collected off the eastern coast of Papua New Guinea. Unlike the precession paradigm expressed in its East Asian counterpart, our record shows that the western Pacific ITCZ migration was influenced by combined precession and obliquity changes. This obliquity forcing could be primarily delivered by a cross-hemispherical thermal/pressure contrast, resulting from the asymmetric continental configuration between Asia and Australia in a coupled East Asian-Australian circulation system, supported by model simulations. Our finding suggests that the obliquity forcing may play a more important role in global hydroclimate cycles than previously thought.

  12. Measured Two-Dimensional Ice-Wedge Polygon Thermal Dynamics

    Science.gov (United States)

    Cable, William; Romanovsky, Vladimir; Busey, Robert

    2016-04-01

    Ice-wedge polygons are perhaps the most dominant permafrost related features in the arctic landscape. The microtopography of these features, that includes rims, troughs, and high and low polygon centers, alters the local hydrology, as water tends to collect in the low areas. During winter, wind redistribution of snow leads to an increased snowpack depth in the low areas, while the slightly higher areas often have very thin snow cover, leading to differences across the landscape in vegetation communities and soil moisture between higher and lower areas. These differences in local surface conditions lead to spatial variability of the ground thermal regime in the different microtopographic areas and between different types of ice-wedge polygons. To study these features in depth, we established temperature transects across four different types of ice-wedge polygons near Barrow, Alaska. The transects were composed of five vertical array thermistor probes (VATP) beginning in the center of each polygon and extending through the trough to the rim of the adjacent polygon. Each VATP had 16 thermistors from the surface to a depth of 1.5 m. In addition to these 80 subsurface temperature measurement points per polygon, soil moisture, thermal conductivity, heat flux, and snow depth were all measured in multiple locations for each polygon. Above ground, a full suite of micrometeorological instrumentation was present at each polygon. Data from these sites has been collected continuously for the last three years. We found snow cover, timing and depth, and active layer soil moisture to be major controlling factors in the observed thermal regimes. In troughs and in the centers of low-center polygons, the combined effect of typically saturated soils and increased snow accumulation resulted in the highest mean annual ground temperatures (MAGT). Additionally, these areas were the last part of the polygon to refreeze during the winter. However, increased active layer thickness was not

  13. Metastable olivine wedge beneath northeast China and its applications

    Science.gov (United States)

    Jiang, G.; Zhao, D.; Zhang, G.

    2013-12-01

    When the Pacific slab subducted into the mantle transition zone, there might exist a metastable olivine wedge (MOW) inside the slab due to the phase transition. Lots of researchers have adopted such various methods to detect the characteristics of this MOW as the forward modeling of travel times, shear wave amplitude patterns, teleseismic P wave coda, receiver function imaging, thermodynamic simulation and so on. Almost all results could be more or less affected by the source, the receiver and/or the velocity model passed through by the seismic rays. In this study, we have used 21 deep earthquakes, greater than 400 km and locating beneath northeast China, to study the velocity within the MOW. For more precisions, we have done further modifications in two ways based on our previous studies. (1) Double-difference location method is used to relocate all events with an error of 1-2 km with the data recorded by stations both at northeast China and at Japan. All relocated events locate in a zone about 30 km away from the upper boundary of Pacific slab. (2) Double residual travel times, generated by an event-pair at a common station at only Japan, are used to constrain the velocity anomaly rather than the residuals themselves. As a result, we have found that an ultra-lower velocity zone (ULVZ), averagely -7% relative to the iasp91 model, exists within the subducted Pacific slab around the deep earthquakes, which might be represented as the metastable olivine wedge. Because of the lower-velocity corresponding to the lower-density, the MOW would provide upward buoyancy forces which might prevent the slab from free subduction into the mantle transition zone. This feed-back mechanism of MOW to the slab is called ';parachute-effect', which is characterized by other researchers. In addition, the existence of the ULVZ or the MOW in the slab may supply a possible mechanism for triggering deep earthquakes, called ';phase transformation faulting', which was already proposed few

  14. Analysis of distribution rule of surface stress on cross wedge rolling contact zone by finite element method

    Science.gov (United States)

    Shu, Xuedao; Li, Lianpeng; Hu, Zhenghuan

    2005-12-01

    Contact surface of cross-wedge rolling is a complicated space surface and distribution rule of contact surface stress is very complicated. So far, its analyzed result was still based on slippery line method. Designing mould and actual production mainly depend on experiential factor. Application and development of cross-wedge rolling was baffled seriously. Based on the forming characteristics of cross-wedge rolling with flat wedge-shape, the ANSYS/DYNA software was developed secondly on the basis of itself, and the corresponding command program was compiled. Rolling process of cross-wedge rolling with flat wedge-shape was simulated successfully. Through simulation, space surface shape of contact surface was achieved, and distribution rule of contact surface stress was analyzed detailed and obtained. The results provide important theoretical foundation for avoiding appearing bug on surface of rolled part, instructing to design cross-wedge mould and confirming force and energy parameter.

  15. Effective magnetic anisotropy manipulation by oblique deposition in magnetostatically coupled Co nanostrip arrays

    Science.gov (United States)

    Kozlov, A. G.; Stebliy, M. E.; Ognev, A. V.; Samardak, A. S.; Davydenko, A. V.; Chebotkevich, L. A.

    2017-01-01

    We report on an experimental investigation of magnetic properties and domain structure of single nanostrips and their magnetostatically coupled arrays possessing the shape anisotropy and anisotropy induced by oblique deposition, which are oriented at different angles to each other. The orientation of the effective anisotropy and the value of coercive force of nanostrip arrays depends on the angle between directions of the induced anisotropies. Micromagnetic simulations, performed to determine possible spin configurations especially within domain walls, support the experimentally observed magnetic domain structure. An influence of dipole-dipole interaction between magnetostatically coupled nanostrips on the domain structure and coercive force of arrays are discussed. We demonstrate the experimental validation of an early-proposed theoretical model for determination of the effective magnetic anisotropy through the combination of induced anisotropies.

  16. Spectral Variations of Of?p Oblique Magnetic Rotator Candidates in the Magellanic Clouds

    CERN Document Server

    Walborn, Nolan R; Naze, Yael; Wade, Gregg A; Bagnulo, Stefano; Barba, Rodolfo H; Apellaniz, Jesus Maiz; Howarth, Ian D; Evans, Christopher J; Sota, Alfredo

    2015-01-01

    Optical spectroscopic monitoring has been conducted of two O stars in the Small and one in the Large Magellanic Cloud, the spectral characteristics of which place them in the Of?p category, which has been established in the Galaxy to consist of oblique magnetic rotators. All of these Magellanic stars show systematic spectral variations typical of the Of?p class, further strengthening their magnetic candidacy to the point of virtual certainty. The spectral variations are related to photometric variations derived from OGLE data by Naze et al. (2015) in a parallel study, which yields rotational periods for two of them. Now circular spectropolarimetry is required to measure their fields, and ultraviolet spectroscopy to further characterize their low-metallicity, magnetically confined winds, in support of hydrodynamical analyses.

  17. SPECTRAL VARIATIONS OF Of?p OBLIQUE MAGNETIC ROTATOR CANDIDATES IN THE MAGELLANIC CLOUDS

    Energy Technology Data Exchange (ETDEWEB)

    Walborn, Nolan R. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Morrell, Nidia I. [Las Campanas Observatory, Carnegie Observatories, Casilla 601, La Serena (Chile); Nazé, Yaël [GAPHE, Département AGO, Université de Liège, Allée du 6 Août 19c, Bat. B5C, B-4000-Liège (Belgium); Wade, Gregg A. [Department of Physics, Royal Military College of Canada, P.O. Box 17000 Station Forces, Kingston, ON, Canada K7K 7B4 (Canada); Bagnulo, Stefano [Armagh Observatory, College Hill, Armagh BT61 9DG (United Kingdom); Barbá, Rodolfo H. [Departamento de Física y Astronomía, Universidad de La Serena, Cisternas 1200 Norte, La Serena (Chile); Apellániz, Jesús Maíz [Centro de Astrobiología, CSIC-INTA, Campus ESAC, Apartado Postal 78, E-28691 Villanueva de la Cañada, Madrid (Spain); Howarth, Ian D. [Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT (United Kingdom); Evans, Christopher J. [UK Astronomy Technology Centre, Royal Observatory Edinburgh, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom); Sota, Alfredo, E-mail: walborn@stsci.edu, E-mail: nmorrell@lco.cl, E-mail: naze@astro.ulg.ac.be, E-mail: wade-g@rmc.ca, E-mail: sba@arm.ac.uk, E-mail: rbarba@dfuls.cl, E-mail: jmaiz@cab.inta-csic.es, E-mail: idh@star.ucl.ac.uk [Instituto de Astrofísica de Andalucía—CSIC, Glorieta de la Astronomía s/n, E-18008 Granada (Spain)

    2015-10-15

    Optical spectroscopic monitoring has been conducted of two O stars in the SMC and one in the LMC, the spectral characteristics of which place them in the Of?p category, which has been established in the Galaxy to consist of oblique magnetic rotators. All of these Magellanic stars show systematic spectral variations typical of the Of?p class, further strengthening their magnetic candidacy to the point of virtual certainty. The spectral variations are related to photometric variations derived from Optical Gravitational Lensing Experiment data by Nazé et al. in a parallel study, which yields rotational periods for two of them. Now circular spectropolarimetry is required to measure their fields, and ultraviolet spectroscopy to further characterize their low-metallicity, magnetically confined winds, in support of hydrodynamical analyses.

  18. One-way successive plate cross wedge rolling machine

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In our last paper(Sci China Ser E-Tech Sci,2009,52(11):3117-3121) we designed the precision forming machine with rolling plate CWR(cross wedge rolling).This kind of machine colligates the advantages of high rigidity and small floor space for roller CWR machine and those of simple die manufacture and high precision for plate CWR machine.At the same time,it abandons the shortcomings of complex die manufacture and poor precision for roller CWR machine,and those of poor rigidity and large floor space for plate CWR machine.During rolling,the upper and lower rolling plates of the machine make reciprocating slide toward or away from each other,so the inertial forces should be overcome,which will cause great energy loss,besides,large floor space is needed when the rolled workpiece is large.In order to solve the above problems,this paper presents the one-way successive plate CWR machine,whose rolling plates need not make reciprocating slide.Hence,it has high energy utilization efficiency and production efficiency.Furthermore,the roll scale can be removed automatically.In particular,the machine can produce large axisymmetrical workpieces.

  19. Sinking, wedging, spreading - viscous spreading on a layer of fluid

    Science.gov (United States)

    Bergemann, Nico; Juel, Anne; Heil, Matthias

    2016-11-01

    We study the axisymmetric spreading of a sessile drop on a pre-existing layer of the same fluid in a regime where the drop is sufficiently large so that the spreading is driven by gravity while capillary and inertial effects are negligible. Experiments performed with 5 ml drops and layer thicknesses in the range 0.1 mm drop evolves as R tn , where the spreading exponent n increases with the layer thickness h. Numerical simulations, based on the axisymmetric free-surface Navier-Stokes equations, reveal three distinct spreading regimes depending on the layer thickness. For thick layers the drop sinks into the layer, accompanied by significant flow in the layer. By contrast, for thin layers the layer ahead of the propagating front is at rest and the spreading behaviour resembles that of a gravity-driven drop spreading on a dry substrate. In the intermediate regime the spreading is characterised by an advancing wedge, which is sustained by fluid flow from the drop into the layer.

  20. Precision forming machine with rolling plate cross wedge rolling

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Roller cross wedge rolling(CWR)machines have high rigidity, but sector dies are difficult to process. Plate CWR machines have low rigidity and need large floor space, but plate dies are easy to process. Neither roller CWR machine nor plate CWR machine can produce larger workpieces. Based on the above conclusions, this paper presents the mechanical principle of the precision forming machine with rolling plate CWR. Then, its design principle and machine construction are presented. There are a top press roller above the upper sliding plate and a bottom press roller under the lower sliding plate. The press rollers make rolling contact with the sliding plates. The plate dies are mounted on the upper and lower sliding plates, respectively. Furthermore, the axes of both press rollers and centerline of work-piece always keep in the identical vertical plane during forming process. These make the machine retain advantages of high rigidity for roller CWR machine and simpleness of manufacturing dies for plate CWR machine, and abandon defects of poor rigidity for plate CWR machine and difficulty of manufac-turing dies for roller CWR machine. Moreover, the machine can produce larger workpieces.

  1. Lateral closed wedge osteotomy for cubitus varus deformity

    Directory of Open Access Journals (Sweden)

    Srivastava Amit

    2008-01-01

    Full Text Available Background: Lateral closed wedge (LCW osteotomy is a commonly accepted method for the correction of the cubitus varus deformity. The fixation of osteotomy is required to prevent loss of correction achieved. The fixation of the osteotomy by the two screw and figure of eight wire is not stable enough to maintain the correction achieved during surgery. In this prospective study we supplemented the fixation by Kirschner′s (K- wires for stable fixation and evaluated the results. Materials and Methods: Twenty-one cases of the cubitus varus deformity following supracondylar fractures of the humerus were operated by LCW osteotomy during February 2001 to June 2006. The mean age of the patients at the time of corrective surgery was 8.5 years (range 6.6-14 years. The osteotomy was fixed by two screws with figure of eight tension band wire between them and the fixation was supplemented by passing two to three K-wires from the lateral condyle engaging the proximal medial cortex through the osteotomy site. Result: The mean follow-up period was 2.5 years (range seven months to 3.4 years. The results were assessed as per Morrey criteria. Eighteen cases showed excellent results and three cases showed good results. Two cases had superficial pin tract infection. Conclusion: The additional fixation by K wires controls rotational forces effectively besides angulation and translation forces and maintains the correction achieved peroperatively.

  2. Precision forming machine with rolling plate cross wedge rolling

    Institute of Scientific and Technical Information of China (English)

    SONG YuQuan; LI ZhiGang; WANG MingHui; GUAN XiaoFang

    2009-01-01

    Roller cross wedge rolling (CWR) machines have high rigidity, but sector dies are difficult to process.Plate CWR machines have low rigidity and need large floor space, but plate dies are easy to process.Neither roller CWR machine nor plate CWR machine can produce larger workpieces.Based on the above conclusions, this paper presents the mechanical principle of the precision forming machine with rolling plate CWR.Then, its design principle and machine construction are presented.There are a top press roller above the upper sliding plate and a bottom press roller under the lower sliding plate.The press rollers make rolling contact with the sliding plates.The plate dies are mounted on the upper and lower sliding plates, respectively.Furthermore, the axes of both press rollers and centerline of work-piece always keep in the identical vertical plane during forming process.These make the machine re-tain advantages of high rigidity for roller CWR machine and simpleness of manufacturing dies for plate CWR machine, and abandon defects of poor rigidity for plate CWR machine and difficulty of manufac-turing dies for roller CWR machine.Moreover, the machine can produce larger workpieces.

  3. Influence of intermolecular forces at critical-point wedge filling.

    Science.gov (United States)

    Malijevský, Alexandr; Parry, Andrew O

    2016-04-01

    We use microscopic density functional theory to study filling transitions in systems with long-ranged wall-fluid and short-ranged fluid-fluid forces occurring in a right-angle wedge. By changing the strength of the wall-fluid interaction we can induce both wetting and filling transitions over a wide range of temperatures and study the order of these transitions. At low temperatures we find that both wetting and filling transitions are first order in keeping with predictions of simple local effective Hamiltonian models. However close to the bulk critical point the filling transition is observed to be continuous even though the wetting transition remains first order and the wetting binding potential still exhibits a small activation barrier. The critical singularities for adsorption for the continuous filling transitions depend on whether retarded or nonretarded wall-fluid forces are present and are in excellent agreement with predictions of effective Hamiltonian theory even though the change in the order of the transition was not anticipated.

  4. Influence of intermolecular forces at critical-point wedge filling

    Science.gov (United States)

    Malijevský, Alexandr; Parry, Andrew O.

    2016-04-01

    We use microscopic density functional theory to study filling transitions in systems with long-ranged wall-fluid and short-ranged fluid-fluid forces occurring in a right-angle wedge. By changing the strength of the wall-fluid interaction we can induce both wetting and filling transitions over a wide range of temperatures and study the order of these transitions. At low temperatures we find that both wetting and filling transitions are first order in keeping with predictions of simple local effective Hamiltonian models. However close to the bulk critical point the filling transition is observed to be continuous even though the wetting transition remains first order and the wetting binding potential still exhibits a small activation barrier. The critical singularities for adsorption for the continuous filling transitions depend on whether retarded or nonretarded wall-fluid forces are present and are in excellent agreement with predictions of effective Hamiltonian theory even though the change in the order of the transition was not anticipated.

  5. Experimental and Numerical Procedures of a Sonar Platform with a Sound Absorption Wedge

    Institute of Scientific and Technical Information of China (English)

    Danzhu Yu; Xiongliang Yao; Shaoshi Dai

    2011-01-01

    Experiments involving a sonar platform with a sound absorption wedge were carried out for the purpose of obtaining the low frequency acoustic characteristics.Acoustic characteristics of a sonar platform model with a sound absorption wedge were measured,and the effects of different wedge laid areas on platform acoustic characteristic were tested.Vibration acceleration and self-noise caused by model vibration were measured in four conditions:0%,36%,60%,and 100% of wedge laid area when the sonar platform was under a single frequency excitation force.An experiment was performed to validate a corresponding numerical calculation.The numerical vibration characteristics of platform area were calculated by the finite element method,and self-noise caused by the vibration in it was predicted by an experiential formula.The conclusions prove that the numerical calculation method can partially replace the experimental process for obtaining vibration and sound characteristics.

  6. Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

    Institute of Scientific and Technical Information of China (English)

    S.; M.; R.; Sadat; Hosseini; A.; Darudi

    2003-01-01

    Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractive index profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer and applying fringe analysis methods.

  7. Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

    Institute of Scientific and Technical Information of China (English)

    S. M. R. Sadat Hosseini; A. Darudi

    2003-01-01

    Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractiveindex profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer andapplying fringe analysis methods.

  8. Development of Cone Wedge Ring Expansion Test to Evaluate Mechanical Properties of Clad Tubing Structure

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-01

    To determine the hoop tensile properties of irradiated fuel cladding in a hot cell, a cone wedge ring expansion test method was developed. A four-piece wedge insert was designed with tapered angles matched to the cone shape of a loading piston. The ring specimen was expanded in the radial direction by the lateral expansion of the wedges under the downward movement of the piston. The advantages of the proposed method are that implementation of the test setup in a hot cell is simple and easy, and that it enables a direct strain measurement of the test specimen from the piston’s vertical displacement soon after the wedge-clad contact resistance is initiated.

  9. Distal femoral varus osteotomy: problems associated with the lateral open-wedge technique.

    Science.gov (United States)

    Jacobi, Matthias; Wahl, Peter; Bouaicha, Samy; Jakob, Roland P; Gautier, Emanuel

    2011-06-01

    Varisation osteotomies on the distal femur are an established treatment method for valgus osteoarthritis of the knee in younger patients. Osteotomy can be done in a lateral open-wedge or medial closed-wedge manner. We retrospectively studied 14 patients treated by the lateral open-wedge technique, fixed with the Tomofix plate, with a mean duration of follow-up of 45 ± 3.4 months. We observed often delayed osteotomy healing after 3, 6 and 12 months, no secondary dislocations, and frequent troublesome irritation due to the plate being on the iliotibial band. However, outcome was satisfactory once the osteotomy healed and the plate was removed. Based on the often slow healing of the osteotomy and frequent irritation due to the plate, this procedure has been abandoned by the authors, and the medial closing-wedge osteotomy adopted as the alternative treatment.

  10. Medial opening wedge distal femoral osteotomy for post-traumatic secondary knee osteoarthritis.

    Science.gov (United States)

    Matsui, Gen; Akiyama, Takenori; Ikemura, Satoshi; Mawatari, Taro

    2014-04-30

    Osteoarthritis of the knee secondary to femoral fracture is difficult to treat. There are some surgical options, such as total knee arthroplasty or correction osteotomy. Opening wedge high tibial osteotomy is an established treatment of gonarthrosis. However, few reports are available on the effectiveness of a medial opening wedge distal femoral osteotomy. We present a case of a medial opening wedge distal femoral osteotomy on gonarthrosis secondary to a malunited femoral fracture with varus deformity and leg length discrepancy. This osteotomy was performed at the deformed femur, with locking plate fixation and autologous bone graft. Six months after the surgery, the osteotomy site was filled with bridging callus. Two years later, the Knee Society Score improved from 45 to 90 points. Medial opening wedge distal femoral osteotomy can be a useful method to treat knee osteoarthritis associated with distal femoral deformity.

  11. Diffraction of an inhomogeneous plane wave by an impedance wedge in a lossy medium

    CSIR Research Space (South Africa)

    Manara, G

    1998-11-01

    Full Text Available The diffraction of an inhomogeneous plane wave by an impedance wedge embedded in a lossy medium is analyzed. The rigorous integral representation for the field is asymptotically evaluated in the context of the uniform geometrical theory...

  12. Second-law analysis of fluid flow over an isothermal moving wedge

    Directory of Open Access Journals (Sweden)

    F. Hedayati

    2014-03-01

    Full Text Available In this study, entropy generation minimization (EGM was employed to optimize fluid flow and heat transfer over a moving wedge. Governing partial differential equations including continuity, momentum and energy are reduced to ordinary ones using similarity variables and solved numerically. The novelty of this study is to consider the effects of the moving wedge parameter λ, to find the stable system via entropy generation minimization (EGM method. The results indicated that as the slope of the wedge increases, the absolute values of the optimum moving wedge parameter λo grow as well. Moreover, it was found that the minimum value of entropy generation happens for the negative values of λo which gets smaller as Falkner–Skan power law parameter m increases.

  13. Optimization of parameters on material removal rate in micro-WEDG ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology ... Optimization of parameters on material removal rate in micro-WEDG process ... nonconventional machining method for manufacturing accurate and complex three dimensional ...

  14. Study on Mach stems induced by interaction of planar shock waves on two intersecting wedges

    Institute of Scientific and Technical Information of China (English)

    Gaoxiang Xiang; Chun Wang; Honghui Teng; Yang Yang; Zonglin Jiang

    2016-01-01

    The properties of Mach stems in hypersonic corner flow induced by Mach interaction over 3D inter-secting wedges were studied theoretically and numerically. A new method called “spatial dimension reduction” was used to analyze theoretically the location and Mach num-ber behind Mach stems. By using this approach, the problem of 3D steady shock/shock interaction over 3D intersecting wedges was transformed into a 2D moving one on cross sec-tions, which can be solved by shock-polar theory and shock dynamics theory. The properties of Mach interaction over 3D intersecting wedges can be analyzed with the new method, including pressure, temperature, density in the vicinity of triple points, location, and Mach number behind Mach stems. Theoretical results were compared with numerical results, and good agreement was obtained. Also, the influence of Mach number and wedge angle on the properties of a 3D Mach stem was studied.

  15. Weak approximation of obliquely reflected diffusions in time-dependent domains

    OpenAIRE

    Önskog, Thomas; Nyström, Kaj

    2010-01-01

    In an earlier paper, we proved the existence of solutions to the Skorohod problem with oblique reflection in time-dependent domains and, subsequently, applied this result to the problem of constructing solutions, in time-dependent domains, to stochastic differential equations with oblique reflection. In this paper we use these results to construct weak approximations of solutions to stochastic differential equations with oblique reflection, in time-dependent domains in R^d, by means of a proj...

  16. Numerical Modeling of Two-Dimensional Temperature Dynamics Across Ice-Wedge Polygons

    Science.gov (United States)

    Garayshin, Viacheslav V.

    The ice wedges on the North Slope of Alaska have been forming for many millennia, when the ground cracked and the cracks were filled with snowmelt water. The infiltrated water then became frozen and turned into ice. When the annual and summer air temperatures become higher, the depth of the active layer increases. A deeper seasonal thawing may cause melting of ice wedges from their tops. Consequently, the ground starts to settle and a trough begins to form above the ice wedge. The forming trough creates a local temperature anomaly in the surrounding ground, and the permafrost located immediately under the trough starts degrading further. Once the trough is formed, the winter snow cover becomes deeper at the trough area further degrading the permafrost. In this thesis we present a computational approach to study the seasonal temperature dynamics of the ground surrounding an ice wedge and ground subsidence associated with ice wedge degradation. A thermo-mechanical model of the ice wedge based on principles of macroscopic thermodynamics and continuum mechanics was developed and will be presented. The model includes heat conduction and quasi-static mechanical equilibrium equations, a visco-elastic rheology for ground deformation, and an empirical formula which relates unfrozen water content to temperature. The complete system is reduced to a computationally convenient set of coupled equations for temperature, ground displacement and ground porosity in a two-dimensional domain. A finite element method and an implicit scheme in time were utilized to construct a non-linear system of equations, which was solved iteratively. The model employs temperature and moisture content data collected from a field experiment at the Next-Generation Ecosystem Experiments (NGEE) sites in Barrow, Alaska. The model describes seasonal dynamics of temperature and the long-term ground motion near the ice wedges and helps to explain destabilization of the ice wedges north of Alaska's Brooks

  17. Comparison of the homogeneity of breast dose distributions with and without the medial wedge.

    Science.gov (United States)

    Ikner, C L; Russo, R; Podgorsak, M B; Proulx, G M; Lee, R J

    1998-01-01

    Radiation of the intact breast often requires medial and lateral wedges to improve dose homogeneity of its pyramidal shape and to achieve acceptable cosmesis. There is some concern that radiation scatter from the medial wedge may contribute to cancer in the uninvolved breast, yet treatment without the medial wedge is associated with inhomogeneity of magnitudes that affect cosmesis. These homogeneities are identified on treatment plans generated at the central axis (CAX). It is not known if comparing isodose curves at the central axis reflect homogeneity in superior and inferior planes. A study was undertaken to both examine inhomogeneity with and without the medial wedge, and to determine if plan selection at the CAX was representative of homogeneity above and below the CAX. Ten consecutive patients with early breast cancers had cranial, CAX, and caudal CT images of each breast compared with two wedging conditions, lateral only (LW) and medial and lateral wedged conditions (dual wedges = DW). Dosimetry was optimized at the CAX for DW and LW conditions. Dose distributions and hot spots relative to prescribed dose were compared for cranial, CAX, and caudal images. Mean chest wall separations were measured. Six of ten patients had equivalent LW and DW distributions at the levels examined. Only one of these patients had a single off-axis hot spot > 20%. Six patients had comparable LW and DW dosimetry and acceptable hot spots at the central axis, as well as chest wall separations < or = 22 cm. In conclusion, if isodose configurations are commensurate at the CAX, these patients will have homogeneity above and below the CAX. In patients with chest wall separations < or = 22 cm, treatment without the medial wedge is feasible, sparing the contralateral breast dose with little compromise to inhomogeneity in the treated breast.

  18. Statics of Magnetic Fluid Drop with Compound Magnetic Core in a Wedge-Shaped Channel

    Directory of Open Access Journals (Sweden)

    V. Bashtovoi

    2013-12-01

    Full Text Available A behavior of magnetic fluid drop with compound magnetic core in a wedge-shaped channel was studied experimentally. The study examines influence of magnetic fluid properties, its volume and magnetic field on statics of the system compound magnet – magnetic fluid drop in wedge-shaped channel. The possibility to change the static conditions of such system by altering magnetic field of the core was observed

  19. The effect of foot orthoses and in-shoe wedges during cycling: a systematic review

    OpenAIRE

    Yeo, Boon K; Bonanno, Daniel R

    2014-01-01

    Background The use of foot orthoses and in-shoe wedges in cycling are largely based on theoretical benefits and anecdotal evidence. This review aimed to systematically collect all published research on this topic, critically evaluate the methods and summarise the findings. Methods Study inclusion criteria were: all empirical studies that evaluated the effects of foot orthoses or in-shoe wedges on cycling; outcome measures that investigated physiological parameters, kinematics and kinetics of ...

  20. Surgical treatment of superior oblique palsy: Predictors of outcome

    Directory of Open Access Journals (Sweden)

    Pilar Merino Sanz

    2017-01-01

    Full Text Available Purpose: The purpose of this study was to evaluate the incidence and outcome of surgically treated superior oblique palsy (SOP and the factors involved in its resolution. Methods: We performed a retrospective study of 76 patients who underwent surgery for SOP. We recorded data from the physical examination and the number and type of procedures performed. Favorable outcome was defined as resolution of or improvement in torticollis (≤5° and diplopia in primary position (PP and downgaze or as vertical deviation (VD <5 prism diopters (pd in PP and 10 pd in the oblique diagnostic position. Results: Mean age was 33.12 years. Congenital SOP was the most frequent type (65.8%. Mean preoperative VD was 15.89 ± 9.94 pd, decreasing to 3.07 ± 4.36 pd after surgery. Associated horizontal deviation was recorded in 51.32% of cases. The mean number of procedures was 1.37 ± 0.62 (range 1–4, with 69.7% of patients requiring only one procedure. The mean number of muscles operated on was 1.96 ± 1.01 (inferior oblique being the most frequent. A greater reduction in VD after surgery was observed in patients with congenital SOP (P = 0.04. Although none of the factors evaluated influenced surgical outcome, amblyopic patients had a greater risk of reoperation (P = 0.04. A favorable outcome was achieved in 75% of cases. Mean follow-up was 37.08 months. Conclusion: Congenital SOP was twice as frequent as acquired SOP and although surgery was successful in most cases, a greater reduction in VD was obtained in congenital cases. Amblyopia was identified as a risk factor for reoperation.

  1. Scattering of Plane Guided Waves Obliquely Incident on Straight Features

    Science.gov (United States)

    Wilcox, P. D.; Velichko, A.; Drinkwater, B. W.; Croxford, A. J.; Todd, M. D.

    2011-06-01

    A semi-analytical finite element model is developed to study the scattering of plane guided waves obliquely incident on a straight geometric feature. The model is first used to investigate the reflection of the S0 mode from a free edge and the results are compared to those of bulk waves reflecting from a free boundary. The model is then used to predict the transmission of the S0 mode past an adhesively-bonded stiffener. The results obtained are in excellent agreement with experimental measurements.

  2. Optical design of the oblique Ece antenna system for JET

    Energy Technology Data Exchange (ETDEWEB)

    Sozzi, C. [Istituto di Fisica del Plasma, Associazione EURATOM-ENEA-CNR, Milan (Italy)]. E-mail: sozzi@ifp.cnr.it; Bruschi, A. [Istituto di Fisica del Plasma, Associazione EURATOM-ENEA-CNR, Milan (Italy); Simonetto, A. [Istituto di Fisica del Plasma, Associazione EURATOM-ENEA-CNR, Milan (Italy); DeLaLuna, E. [Asociacion EURATOM-CIEMAT, CIEMAT, Madrid (Spain); Fessey, J. [EURATOM-UKAEA Association, Culham Science Centre, Abingdon (United Kingdom); Riccardo, V. [EURATOM-UKAEA Association, Culham Science Centre, Abingdon (United Kingdom)

    2005-11-15

    Systematic disagreements between Ece and Thomson Scattering diagnostics observed in various fusion devices led to the proposal of the so called Oblique Ece diagnostics on JET. This system will allow the study of the electron distribution function at low energies to reveal deviations from the Maxwellian distribution. This paper is devoted to the design of the quasi optical antenna for this diagnostics. The physical bases of the diagnostics imply two lines of sight at about 10{sup o} and 20{sup o} respectively from the magnetic field gradient. Severe geometrical constraints are imposed by the location of the antenna. The design strategy and physical optics calculations used to validate it are presented.

  3. Nonlinear evolution of oblique waves on compressible shear layers

    Science.gov (United States)

    Goldstein, M. E.; Leib, S. J.

    1989-01-01

    The effects of critical-layer nonlinearity on spatially growing oblique instability waves on compressible shear layers between two parallel streams are considered. The analysis shows that mean temperature nonuniformities cause nonlinearity to occur at much smaller amplitudes than it does when the flow is isothermal. The nonlinear instability wave growth rate effects are described by an integrodifferential equation which bears some resemblance to the Landau equation, in that it involves a cubic-type nonlinearity. The numerical solutions to this equation are worked out and discussed in some detail. Inviscid solutions always end in a singularity at a finite downstream distance, but viscosity can eliminate this singularity for certain parameter ranges.

  4. The Obliquity Distribution of Near-Earth Asteroids

    Science.gov (United States)

    Chesley, Steven R.; Farnocchia, D.; Cotto-Figueroa, D.; Statler, T. S.

    2013-05-01

    Abstract (2,250 Maximum Characters): Direct estimates of the Yarkovsky effect on near-Earth asteroids (NEAs) indicate that detectable semimajor axis drift rates are approximately 2-4 times more likely to be negative than positive (Nugent et al., AJ 144, 2012; Farnocchia et al., Icarus in press, 2013). The Yarkovsky effect induces a semimajor axis drift rate that is proportional to the cosine of the obliquity, and thus the excess of negative drift rates suggests an excess of retrograde rotation among the NEAs. This reinforces an earlier result from light curve inversion techniques (La Spina et al., Nature 428, 2004). The retrograde excess is presumed to arise from the nu6 resonance, which is situated near the inner edge of the main belt. Main-belt asteroids that are Yarkovsky-driven into the near-Earth region via the nu6 resonance must have a negative semimajor axis drift and therefore retrograde rotation, leading to an overabundance of retrograde rotators, even though other source regions may have parity between retrograde and direct rotators. The Yarkovsky detections do not directly shed light on the relative presence of mid-range obliquities, which tend to have low drift rates and therefore fail to yield statistically significant drift estimates, but they do present significantly different selection effects when compared to light curve inversions. We present preliminary results from our effort to derive independent constraints on the obliquity distribution of NEAs based on the distribution of estimated semimajor axis drift rates among the NEA population and their associated uncertainties. Our approach to solving the inverse problem starts by deriving the drift rates and associated signal-to-noise ratios for a semi-synthetic NEA population that assumes a parameterized obliquity distribution. The parameters are adjusted until the simulated distributions match the observed distributions, yielding not only an estimated distribution, but also uncertainties and

  5. Strain Partitioning and the Geometry of Oblique Plate Convergence

    Science.gov (United States)

    Guzman-Speziale, M.

    2004-05-01

    Strain partitioning occurs at convergent margins where oblique subduction takes place, a fact that has been known for a number of years. The geometry of plate subduction controls strain-partitioning mode in the forearc region. Deformation in the forearc depends on the direction of relative plate convergence, earthquake slip vectors, and trench-normal direction. Two basic angles are derived from these vectors: obliquity of plate convergence, the angle of plate motion direction and trench normal, and slip partitioning which is the angle between the earthquake slip vector and trench normal. Traditionally, oblique convergence models consider the trench (convergent margin) a straight line on a flat Earth. This is correct for small-scale (in the order of a few kilometers) models. However, earthquakes along convergent margins often have fault lengths of tens and even hundreds (for magnitude 7 or greater) of kilometers. On the other hand, the direction normal to the trench is usually calculated averaging contiguous points along the deepest part of the digitized bathymetry, yielding the local trend of the trench. The direction normal to the trench thus calculated varies greatly along a specific trench. In this work we propose an alternate treatment of the geometry of the trench. On a spherical Earth, trench segments form arcs of small circles. Usually, a trench of interest will contain a few (three-five) such segments, which can be fitted (in a least-squares sense) with small circles with a known center of curvature (or pole) on the surface of the Earth. Also known are the initial and final points. Instead of the standard direction normal to the trench, we use the average azimuth from the segment of small circle to its corresponding pole. We use this direction instead of trench normal and calculate obliquity of plate convergence. We test our model along the western Sunda arc, from the eastern Himalayan sintaxis to Sumatra. Five contiguos small circles were fitted to the

  6. FLOW CHARACTERISTICS OF TURBULENT JETS INJECTED OBLIQUELY IN CROSSFLOW

    Institute of Scientific and Technical Information of China (English)

    GUO Ting-ting; LI Shao-hua; XU Zhong

    2004-01-01

    Numerical simulation has been performed to investigate the characteristics of the turbulent jet issuing obliquely into a crossflow, at the injection angles of 90° and 60°. The SIMPLEC algorithm in the body-fitted coordinates and the wall-function method using the RNG k-ε turbulence model have been adopted to simulate this flow at two jet-to-crossflow velocity ratios, 2 and 4. The numerical results are good agreement with the experimental measurements, the jet trajectories have been given, the separation events in the lee of the jet exit have been found, and the forming mechanism has been analyzed.

  7. Computer modeling of test particle acceleration at oblique shocks

    Science.gov (United States)

    Decker, Robert B.

    1988-01-01

    The present evaluation of the basic techniques and illustrative results of charged particle-modeling numerical codes suitable for particle acceleration at oblique, fast-mode collisionless shocks emphasizes the treatment of ions as test particles, calculating particle dynamics through numerical integration along exact phase-space orbits. Attention is given to the acceleration of particles at planar, infinitessimally thin shocks, as well as to plasma simulations in which low-energy ions are injected and accelerated at quasi-perpendicular shocks with internal structure.

  8. Oblique corrections in the Dine-Fischler-Srednicki axion model

    Directory of Open Access Journals (Sweden)

    Katanaeva Alisa

    2016-01-01

    We discuss the Dine-Fischler-Srednicki (DFS model, which extends the two-Higgs doublet model with an additional Peccei-Quinn symmetry and leads to a physically acceptable axion. The non-linear parametrization of the DFS model is exploited in the generic case where all scalars except the lightest Higgs and the axion have masses at or beyond the TeV scale. We compute the oblique corrections and use their values from the electroweak experimental fits to put constraints on the mass spectrum of the DFS model.

  9. Mud volcano venting induced gas hydrate formation at the upper slope accretionary wedge, offshore SW Taiwan

    Science.gov (United States)

    Lin, Saulwood; Tseng, Yi-Ting; Cheng, Wan-Yen; Chou, Cheng-Tien; Chen, NeiChen; Hsieh, I.-Chih

    2016-04-01

    TsanYao Mud Volcano (TYMV) is the largest mud volcano cone in the Hengchun Mud Volcano Group (HCMVG), located at the upper slope of the accrretionary wedge, southwest of Taiwan. The region is under active tectonic activity with the Philippine Plate, moving northwestward at a rate of ~8 cm/year. This region also receives huge quantity of suspended particle load of ~100 mT/year at present time from adjacent small rivers of the Island of Taiwan. Large loads of suspended sediments influx become a major source of organic carbon and later gas and other hydrocarbon. Gas and fluid in the mud volcano are actively venting from deep to the sea floor on the upper slope of the accretionary wedge. In order to understand venting on the HCMVG, echo sounder, towcam and coring were carried out. Pore water sulfate, chloride, potassium, calcium, stable isotope O-18, gas compositions, dissolved sulfide were analysed. The HCMVG consists of 12 volcano cones of different sizes. Large quantity of gas and fluid are venting directly from deep to the TYMV structure high, as well as 50+ other vents as appeared as flares on the echo sounder. Some flares are reaching to the atmosphere and likely a source of green house gases to the atmosphere. Venting fluids include gas bubbles, suspended particle, mud, and breccia. Breccia size could reach more than 12 cm in diameter. Circular bands in different color appeared around the cone may represent stages of vent eruptions. Compositions of vent gas include methane, ethane and propane. High proportions of ethane and propane in the vent gas demonstrated that source of gas are thermogenic in origin. Patchy authigenic carbonate, bacterial mats, bivalves, tube worms and other chemosynthesis organisms were supported by venting gas AOM process near the sea floor. Pore water chloride concentrations show distinct variation pattern from center cone to the side of the volcano, with low in the center and high away from the cone. Pore water with higher than seawater

  10. Assessment of a multibeam Fizeau wedge interferometer for Doppler wind lidar.

    Science.gov (United States)

    McKay, Jack A

    2002-03-20

    The Fabry-Perot interferometer is the standard instrument for the direct detection Doppler lidar measurement of atmospheric wind speeds. The multibeam Fizeau wedge has some practical advantages over the Fabry-Perot, such as the linear fringe pattern, and is evaluated for this application. The optimal Fizeau must have a resolving power of 10(6) or more. As the multibeam Fizeau wedge is pushed to such high resolving power, the interference fringes of the device become complicated by asymmetry and secondary maxima. A simple condition for the interferometer plate reflectance, optical gap, and wedge angle reveals whether a set of parameters will yield simple, Airy-like fringes or complex Fizeau fringes. Tilting of the Fizeau wedge improves the fringe shape and permits an extension of the regime of Airy-like fringes to higher resolving power. Sufficient resolving power for the wind lidar application is shown to be possible with a large-gap, low-finesse multibeam Fizeau wedge. Liabilities of the multibeam Fizeau wedge in the wind lidar application include a smaller acceptance solid angle and calibration sensitivity to localized deviations of the plates from the ideal.

  11. EFFECT OF SALT WEDGE INTRUSION IN KUSHIRO WETLAND CONSIDERING SEA LEVEL RISE

    Science.gov (United States)

    Nakamoto, Atsushi; Shintani, Tetsuya; Nakayama, Keisuke; Maruya, Yasuyuki; Ishida, Tetsuya; Houmura, Kenichi

    This paper describes the effect of sea-level rise (SLR) on the salt wedge intrusion in terms of ecological system in Kushiro wetland. Kushiro wetland was registered by Ramsar Treaty and the largest wetland in Japan. A previous study demonstrates that the salt wedge intrusion may not affect ecological system of Kushiro wetland, such as loss of freshwater plants along Kushiro River. However, it is revealed that SLR may occur in the end of the 21st century, which enhances the increase in the distance of the salt wedge intrusion along Kushiro River and the loss of endangered species of Kushiro wetland along Kushiro River. This study thus aims to investigate the influence of the salt wedge intrusion on freshwater plants along Kushiro River, and to clarify the salt wedge intrusion when SLR occurs due to climate change. We attempted to investigate the influence of SLR on endangered species along Kyu-Kushiro River in which sea water is likely to intrude up to about 8 km from the river mouth. As results, it is suggested from field observations that salinity may decrease freshwater plants along Kushiro River, and it clarifies the possibility that the salt wedge intrudes Kushiro River due to SLR by using 3D hydrodynamic model, Fantom3D.

  12. Experimental study of slot jet impingement heat transfer on a wedge-shaped surface

    Science.gov (United States)

    Rahimi, Mostafa; Irani, Mohammad

    2012-12-01

    An experimental investigation was conducted to study the convective heat transfer rate from a wedge-shaped surface to a rectangular subsonic air jet impinging onto the apex of the wedge. The jet Reynolds number, nozzle-to-surface distance and the wedge angle were considered as the main parameters. Jet Reynolds number was ranged from 5,000 to 20,000 and two dimensionless nozzle-to-surface distances h/w = 4 and 10 were examined. The apex angle of the wedge ranged from 30° to 180° where the latter case corresponds with that of a flat surface. Velocity profile and turbulence intensity were provided for free jet flow using hot wire anemometer. Local and average Nusselt numbers on the impinged surface are presented for all the configurations. Based on the results presented, the local Nusselt number at the stagnation region increases as the wedge angle is decreased but, it then decreases over the remaining area of the impinged surface. Average Nusselt number over the whole surface is maximum when the wedge angle is 180° (i.e. plane surface) for any jet and nozzle-to-surface configuration.

  13. Improve the transconductance of a graphene field-effect transistor by folding graphene into a wedge

    Science.gov (United States)

    Cao, Guiming; Liu, Weihua; Cao, Meng; Li, Xin; Zhang, Anping; Wang, Xiaoli; Chen, Bangdao

    2016-07-01

    The transport property of a graphene wedge channel is studied theoretically and its leakage current through field emission is estimated when considering the effect of the internal electric field. The transconductance of the graphene transistor is improved from 0.016 to 0.321 μS μm-1 when the graphene is folded into a wedge (with angle of wedge π/6 and radius curvature 2.7 nm at the tip), while the wedge height is much smaller than the space between the top-gate and the channel. The improved transconductance is due to the locally enhanced electric field, which results in a potential well and causes electron accumulation at the wedge tip. The leakage current through field emission J FE shows a super-linear increase with the channel conductive current J DS, where overall the electron supply for the field emission at the wedge tip is improved by the channel bias voltage V DS.

  14. Ballistic Behaviour of Thick Steel Armour Plate under Oblique Impact : Experimental Investigation II

    OpenAIRE

    S. N. Dikshit

    1999-01-01

    The ballistic behaviour of thick steel armour plate at different obliquities has been investigated. Ballistic experiments were conducted in the velocity range 300-800 mls at 0°, 15°, 30° and 45° obliquity .A steel, conical projectile or 6.1 mm diameter was impacted on a 10 mm thick steel armour plate. At 30° and 45° obliquity, the plate offers protection up to a striking velocity of 800 mls. At zero obliquity, the plate provides protection below 6~ m/s. The depth of penetration decreases with...

  15. Ballistic Behaviour of Thick Steel Armour Plate under Oblique Impact: Experimental Investigation .

    OpenAIRE

    S. N. Dikshit

    1998-01-01

    The ballistic behaviour of thick steel amlOW- plate has been investigated at different obliquity when impacted by an ogive-shaped steel projectile. The ballistic experiments have been conducted in the velocity range 300-800 m/s. Both the thickness of the target plate and the diameter of the projectile were 20 Inm. At 30 and 45. obliquity 20 mm plate provides full protection at 800 m/s, whereas at 0 and 15. obliquity, the plate provides protection up to 600 m/s. At 15 and 30° obliquity, the pl...

  16. Ballistic Behaviour of Thick Steel Armour Plate under Oblique Impact : Experimental Investigation II

    OpenAIRE

    S. N. Dikshit

    1999-01-01

    The ballistic behaviour of thick steel armour plate at different obliquities has been investigated. Ballistic experiments were conducted in the velocity range 300-800 mls at 0°, 15°, 30° and 45° obliquity .A steel, conical projectile or 6.1 mm diameter was impacted on a 10 mm thick steel armour plate. At 30° and 45° obliquity, the plate offers protection up to a striking velocity of 800 mls. At zero obliquity, the plate provides protection below 6~ m/s. The depth of penetration decreases with...

  17. Ballistic Behaviour of Thick Steel Armour Plate under Oblique Impact: Experimental Investigation .

    OpenAIRE

    S. N. Dikshit

    1998-01-01

    The ballistic behaviour of thick steel amlOW- plate has been investigated at different obliquity when impacted by an ogive-shaped steel projectile. The ballistic experiments have been conducted in the velocity range 300-800 m/s. Both the thickness of the target plate and the diameter of the projectile were 20 Inm. At 30 and 45. obliquity 20 mm plate provides full protection at 800 m/s, whereas at 0 and 15. obliquity, the plate provides protection up to 600 m/s. At 15 and 30° obliquity, the pl...

  18. Active shortening within the Himalayan orogenic wedge implied by the 2015 Gorkha earthquake

    Science.gov (United States)

    Whipple, Kelin X.; Shirzaei, Manoochehr; Hodges, Kip V.; Ramon Arrowsmith, J.

    2016-09-01

    Models of Himalayan neotectonics generally attribute active mountain building to slip on the Himalayan Sole Thrust, also termed the Main Himalayan Thrust, which accommodates underthrusting of the Indian Plate beneath Tibet. However, the geometry of the Himalayan Sole Thrust and thus how slip along it causes uplift of the High Himalaya are unclear. We show that the geodetic record of the 2015 Gorkha earthquake sequence significantly clarifies the architecture of the Himalayan Sole Thrust and suggests the need for revision of the canonical view of how the Himalaya grow. Inversion of Gorkha surface deformation reveals that the Himalayan Sole Thrust extends as a planar gently dipping fault surface at least 20-30 km north of the topographic front of the High Himalaya. This geometry implies that building of the high range cannot be attributed solely to slip along the Himalayan Sole Thrust over a steep ramp; instead, shortening within the Himalayan wedge is required to support the topography and maintain rapid rock uplift. Indeed, the earthquake sequence may have included a moderate rupture (Mw 6.9) on an out-of-sequence thrust fault at the foot of the High Himalaya. Such internal deformation is an expected response to sustained, focused rapid erosion, and may be common to most compressional orogens.

  19. Retroperitoneal oblique corridor to the L2-S1 intervertebral discs in the lateral position: an anatomic study.

    Science.gov (United States)

    Davis, Timothy T; Hynes, Richard A; Fung, Daniel A; Spann, Scott W; MacMillan, Michael; Kwon, Brian; Liu, John; Acosta, Frank; Drochner, Thomas E

    2014-11-01

    accessed from an oblique angle consistently with gentle retraction of the iliac vessels. This study supports the potential of an MIS oblique retroperitoneal approach to the L2-S1 discs.

  20. Active Aerothermoelastic Control of Hypersonic Double-wedge Lifting Surface

    Institute of Scientific and Technical Information of China (English)

    Laith K Abbas; Chen Qian; Piergiovanni Marzocca; Gürdal Zafer; Abdalla Mostafa

    2008-01-01

    Designing reentry space vehicles and high-speed aireraft requires special attention to the nonlinear thermoelastic and aerodynamic instability of their structural components. The thermal effects are important since temperature environment brings dramatic influences on the static and dynamic behaviors of flight structures in supersonic/hypersonic regimes and is likely to cause instability, catastrophic failure and oscillations resulting in structural failure due to fatigue. In order to understand the dynamic behaviors of these "hot"structures, a double-wedge lifting surface with combining freeplay and cubic structural nonlinearities in both plunging and pitching degrees-of-freedom operating in supersonic/hypersonic flight speed regimes has been analyzed. A third order piston theory aerodynamic isused to estimate the applied nonlinear unsteady aerodynamic loads. Also considered is the loss of torsiunal stiffness that may be incurredby lifting surfaces subject to axial stresses induced by aerodynamic heating. The aerodynamic heating effects are estimated based on theadiabatic wall temperature due to high speed airstreams. As a recently emerging technology, the active aerothermoelastic control isaimed at providing solutions to a large number of problems involving the aeronautica Faerospace flight vehicle structures. To preventsuch damaging phenomena from occurring, an application of linear and nonlinear active control methods on both flutter boundary andpost-flutter behavior has been fulfilled. In this paper, modeling issues as well as numerical simulation have been presented and pertinent conclusions outlined. It is evidenced that a serious loss of torsional stiffness may induce the dynamic instability; however active controlcan be used to expand the flutter boundary and convert unstable limit cycle oscillations (LCO) into the stable LCO and/or to shift the transition between these two states toward higher flight Mach numbers.

  1. Modes of continental extension in a lithospheric wedge

    Science.gov (United States)

    Wu, G.; Lavier, L. L.; Choi, E.

    2014-12-01

    We studied extension of a lithospheric wedge as an approximation to an orogenic belt or a continental margin. We ran a series of numerical models to quantify the effects of the strength of the lower crust and a mid-crustal shear zone (MCSZ) on the extension processes. When the MCSZ is present, we found that the regional lower crustal flow plays a critical role in controlling the modes of extension. The compensation is long-wavelength when the lower crust flows from the highest to the lowest elevation in order to compensate upper crustal thinning. In response to this motion, the mantle flows towards the highest elevation in order to balance for the lower crust leaving the area under the highest topography. For weak (wet quartz regime with partial melting) or intermediate (wet quartz regime), or strong (dry quartz regime) lower crust, we recognized three predominantly decoupled modes of extension characterized by 1) significant lower crustal exhumation exemplified as a large massif, 2) formation of core complexes and detachment faults, and 3) distributive domino faulting, respectively. Without the MCSZ, however, the lower crustal flow is essentially subdued with predominantly coupled extension. For weak or intermediate, or strong lower crust, we recognized three coupled modes characterized by 1) localized generally symmetric crustal exhumation, 2) distributed grabens and narrow rifts, and 3) wide continental margins, respectively. The MCSZ controls the degree of decoupling of the lower crustal flow such that a frictionally stronger MCSZ does not change the behaviors of the models but results in a more distributed extension. Due to the long-wavelength compensation, subhorizontal Moho is achieved where intensive extension occurred for all the decoupled models with a MCSZ. Natural counterparts for each mode may be easily identified, for instance, in the Basin and Range or the Aegean.

  2. Laboratory investigation of water extraction effects on saltwater wedge displacement

    Directory of Open Access Journals (Sweden)

    S. Noorabadi

    2017-12-01

    Full Text Available There is a close connection between saltwater intrusion into aquifers and groundwater extraction. Freshwater extraction in coastal aquifers is one of the most important reasons for the saltwater intrusion into these aquifers. Condition of extraction system such as well depth, discharge rate, saltwater concentration and etc. could affect this process widely. Thus, investigating different extraction conditions comprises many management advantages.  In the present study, the effects of freshwater extraction on saltwater interface displacement have been investigated in a laboratory box. Three different well depths (H were considered with combinations of 3 different extraction rates (Q and 3 saltwater concentrations (C for detailed investigation of the effects of these factors variations on saltwater displacement. SEAWAT model has been used to simulate all the scenarios to numerically study of the process. The experimental and numerical results showed that when the C and Q rates were small and the well depth was shallow, the saltwater interface wouldn’t reach the extraction well, so the extracted water remained uncontaminated. When the C and Q rates were increased and the well was deepened, the salinity of the extracted water became higher. When the Q and C rates were high enough, in the shallow well depth, the final concentration of the extracted water was low but a huge part of the porous media was contaminated by the saltwater, furthermore when the well was deepened enough, the final concentration of the extracted water was increased but a small part of the porous media was contaminated by the saltwater. Finally, the results showed that when the Q and H rates were high enough, the extraction well behaved like a barrier and didn’t allow the advancing saltwater wedge toe to be intruded beyond the wells.

  3. Texture mechanisms and microstructure of biaxial thin films grown by oblique angle deposition

    Energy Technology Data Exchange (ETDEWEB)

    Shetty, A.R.; Karimi, A. [Institut de Physique de la Matiere Condensee (IPMC), Ecole Polytechnique Federale de Lausanne (EPFL), Lausanne (Switzerland)

    2012-08-15

    In order to understand the texture formation mechanism in thin films grown under oblique angle deposition (OAD), TiAlN films were deposited at room temperature (RT) under various incident angles. We show that both in-plane and out-of-plane crystallographic orientations respond strongly to the deposition angle. For {alpha} = 0 , the pole figures show a (111) and (200) mixed out-of-plane orientation with random in-plane alignment. In contrast, under OAD, inclined textures are observed with the (111) direction moving toward the incident flux direction and the (200) moving away, showing substantial in-plane alignment. This observation suggests that TiAlN crystals prefer to grow with the (200) direction perpendicular to the substrate while maintaining the minimization of the surface free energy by maximizing the (111) surface area toward the incident flux. The in-plane texture, which is randomly oriented at normal incidence, gives rise to two preferred orientations under oblique angles - one along the direction of flux and other away from the deposition source. The biaxial texture results from a competition among texture mechanism related to surface mobilities of adatoms, geometrical and directional effects. The surface and cross-section of the films were observed by scanning electron microscopy (SEM). OAD films develop a kind of smooth tiles of a roof structure, with no faceted crystallites. The columns of these films were tilted toward the direction of incident flux. The dependence of (111) texture tilt angle and column angle {beta} on the incidence flux angle {alpha} is evaluated using four well-known models. Transmission electron microscopy (TEM) study reveals a voided, intercolumnar structure with oblique growth toward the flux direction. The selected area diffraction pattern (SAED) pattern supports the pole figure observations. Measurements of the nanoindentation test were performed in order to discuss the change of mechanical properties as a function of incident

  4. Obliquity and precession as pacemakers of Pleistocene deglaciations

    CERN Document Server

    Feng, Fabo

    2015-01-01

    The Milankovitch theory states that the orbital eccentricity, precession, and obliquity of the Earth influence our climate by modulating the summer insolation at high latitudes in the northern hemisphere. Despite considerable success of this theory in explaining climate change over the Pleistocene epoch (2.6 to 0.01 Myr ago), it is inconclusive with regard to which combination of orbital elements paced the 100 kyr glacial-interglacial cycles over the late Pleistocene. Here we explore the role of the orbital elements in pacing the Pleistocene deglaciations by modeling ice-volume variations in a Bayesian approach. When comparing models, this approach takes into account the uncertainties in the data as well as the different degrees of model complexity. We find that the Earth's obliquity (axial tilt) plays a dominant role in pacing the glacial cycles over the whole Pleistocene, while precession only becomes important in pacing major deglaciations after the transition of the dominant period from 41 kyr to 100 kyr ...

  5. Oblique collision and deformation partitioning in the SW Iberian Variscides

    Science.gov (United States)

    Pérez-Cáceres, Irene; Simancas, José Fernando; Martínez Poyatos, David; Azor, Antonio; González Lodeiro, Francisco

    2016-05-01

    Different transpressional scenarios have been proposed to relate kinematics and complex deformation patterns. We apply the most suitable of them to the Variscan orogeny in SW Iberia, which is characterized by a number of successive left-lateral transpressional structures developed in the Devonian to Carboniferous period. These structures resulted from the oblique convergence between three continental terranes (Central Iberian Zone, Ossa-Morena Zone and South Portuguese Zone), whose amalgamation gave way to both intense shearing at the suture-like contacts and transpressional deformation of the continental pieces in-between, thus showing strain partitioning in space and time. We have quantified the kinematics of the collisional convergence by using the available data on folding, shearing and faulting patterns, as well as tectonic fabrics and finite strain measurements. Given the uncertainties regarding the data and the boundary conditions modeled, our results must be considered as a semi-quantitative approximation to the issue, though very significant from a regional point of view. The total collisional convergence surpasses 1000 km, most of them corresponding to left-lateral displacement parallel to terrane boundaries. The average vector of convergence is oriented E-W (present-day coordinates), thus reasserting the left-lateral oblique collision in SW Iberia, in contrast with the dextral component that prevailed elsewhere in the Variscan orogen. This particular kinematics of SW Iberia is understood in the context of an Avalonian plate salient currently represented by the South Portuguese Zone.

  6. Multistability inspired by the oblique, pennate architectures of skeletal muscle

    Science.gov (United States)

    Kidambi, Narayanan; Harne, Ryan L.; Wang, K. W.

    2017-04-01

    Skeletal muscle mechanics exhibit a range of noteworthy characteristics, providing great inspiration for the development of advanced structural and material systems. These characteristics arise from the synergies demonstrated between muscle's constituents across the various length scales. From the macroscale oblique orientation of muscle fibers to the microscale lattice spacing of sarcomeres, muscle takes advantage of geometries and multidimensionality for force generation or length change along a desired axis. Inspired by these behaviors, this research investigates how the incorporation of multidimensionality afforded by oblique, pennate architectures can uncover novel mechanics in structures exhibiting multistability. Experimental investigation of these mechanics is undertaken using specimens of molded silicone rubber with patterned voids, and results reveal tailorable mono-, bi-, and multi-stability under axial displacements by modulation of transverse confinement. If the specimen is considered as an architected material, these results show its ability to generate intriguing, non-monotonic shear stresses. The outcomes would foster the development of novel, advanced mechanical metamaterials that exploit pennation and multidimensionality.

  7. Epipolar Rectification with Minimum Perspective Distortion for Oblique Images

    Science.gov (United States)

    Liu, Jianchen; Guo, Bingxuan; Jiang, Wanshou; Gong, Weishu; Xiao, Xiongwu

    2016-01-01

    Epipolar rectification is of great importance for 3D modeling by using UAV (Unmanned Aerial Vehicle) images; however, the existing methods seldom consider the perspective distortion relative to surface planes. Therefore, an algorithm for the rectification of oblique images is proposed and implemented in detail. The basic principle is to minimize the rectified images’ perspective distortion relative to the reference planes. First, this minimization problem is formulated as a cost function that is constructed by the tangent value of angle deformation; second, it provides a great deal of flexibility on using different reference planes, such as roofs and the façades of buildings, to generate rectified images. Furthermore, a reasonable scale is acquired according to the dihedral angle between the rectified image plane and the original image plane. The low-quality regions of oblique images are cropped out according to the distortion size. Experimental results revealed that the proposed rectification method can result in improved matching precision (Semi-global dense matching). The matching precision is increased by about 30% for roofs and increased by just 1% for façades, while the façades are not parallel to the baseline. In another designed experiment, the selected façades are parallel to the baseline, the matching precision has a great improvement for façades, by an average of 22%. This fully proves our proposed algorithm that elimination of perspective distortion on rectified images can significantly improve the accuracy of dense matching. PMID:27827991

  8. Exterior Orientation Estimation of Oblique Aerial Imagery Using Vanishing Points

    Science.gov (United States)

    Verykokou, Styliani; Ioannidis, Charalabos

    2016-06-01

    In this paper, a methodology for the calculation of rough exterior orientation (EO) parameters of multiple large-scale overlapping oblique aerial images, in the case that GPS/INS information is not available (e.g., for old datasets), is presented. It consists of five main steps; (a) the determination of the overlapping image pairs and the single image in which four ground control points have to be measured; (b) the computation of the transformation parameters from every image to the coordinate reference system; (c) the rough estimation of the camera interior orientation parameters; (d) the estimation of the true horizon line and the nadir point of each image; (e) the calculation of the rough EO parameters of each image. A developed software suite implementing the proposed methodology is tested using a set of UAV multi-perspective oblique aerial images. Several tests are performed for the assessment of the errors and show that the estimated EO parameters can be used either as initial approximations for a bundle adjustment procedure or as rough georeferencing information for several applications, like 3D modelling, even by non-photogrammetrists, because of the minimal user intervention needed. Finally, comparisons with a commercial software are made, in terms of automation and correctness of the computed EO parameters.

  9. Oblique waves on a vertically sheared current are rotational

    CERN Document Server

    Ellingsen, Simen Å

    2015-01-01

    In the study of surface waves in the presence of a shear current, a useful and much studied model is that in which the shear flow has constant vorticity. Recently it was shown by Constantin [Eur. J. Mech. B/Fluids 30 (2011) 12-16] that a flow of constant vorticity can only permit waves travelling exactly upstream or downstream, but not at oblique angles to the current, and several proofs to the same effect have appeared thereafter. Physical waves cannot possibly adhere to such a restriction, however. We resolve the paradox by showing that an oblique plane wave propagating atop a current of constant vorticity according to the linearized Euler equation carries with it an undulating perturbation of the vorticity field, hence is not prohibited by the Constantin theorem since vorticity is not constant. The perturbation of the vorticity field is readily interpreted in a Lagrangian perspective as the wave motion gently shifting and twisting the vortex lines as the wave passes. In the special case of upstream or down...

  10. Orbital obliquities of transiting planets from starspot occultations

    CERN Document Server

    Southworth, John

    2016-01-01

    When a planet passes in front of a starspot during a transit of its host star, it causes a small upward blip in the light curve. Modelling the transit with the starspot allows the size, brightness and position of the spot to be measured. If the same spot can be observed in two different transits, it is possible to track the motion of the spot due to the rotation of the star. The rotation period and velocity of the star (Prot and Vsini) and the sky-projected orbital obliquity of the system (lambda) can then be determined. If one has three or more observations of the same spot, the true orbital obliquity (psi) can be measured. We are performing this analysis for a number of cool stars orbited by transiting planets. We present our results so far and compile a catalogue of lambda and psi measurements from spot crossing events. The method is particularly useful for cool stars, and is therefore complementary to studies of the Rossiter-McLaughlin effect, which perform better on hotter and faster-rotating stars.

  11. Magnetic and Electric Field Polarizations of Oblique Magnetospheric Chorus Waves

    Science.gov (United States)

    Verkhoglyadova, Olga; Tsurutani, Bruce T.; Lakhina, Gurbax S.

    2012-01-01

    A theory was developed to explain the properties of the chorus magnetic and electric field components in the case of an arbitrary propagation angle. The new theory shows that a whistler wave has circularly polarized magnetic fields for oblique propagation. This theoretical result is verified by GEOTAIL observations. The wave electric field polarization plane is not orthogonal to the wave vector, and in general is highly elliptically polarized. A special case of the whistler wave called the Gendrin mode is also discussed. This will help to construct a detailed and realistic picture of wave interaction with magnetosphere electrons. It is the purpose of this innovation to study the magnetic and electric polarization properties of chorus at all frequencies, and at all angles of propagation. Even though general expressions for electromagnetic wave polarization in anisotropic plasma are derived in many textbooks, to the knowledge of the innovators, a detailed analysis for oblique whistler wave mode is lacking. Knowledge of the polarization properties is critical for theoretical calculations of resonant wave-particle interactions.

  12. The oblique perspective: philosophical diagnostics of contemporary life sciences research.

    Science.gov (United States)

    Zwart, Hub

    2017-12-01

    This paper indicates how continental philosophy may contribute to a diagnostics of contemporary life sciences research, as part of a "diagnostics of the present" (envisioned by continental thinkers, from Hegel up to Foucault). First, I describe (as a "practicing" philosopher) various options for an oblique (or symptomatic) reading of emerging scientific discourse, bent on uncovering the basic "philosophemes" of science (i.e. the guiding ideas, the basic conceptions of nature, life and technology at work in contemporary life sciences research practices). Subsequently, I outline a number of radical transformations occurring both at the object-pole and at the subject-pole of the current knowledge relationship, namely the technification of the object and the anonymisation or collectivisation of the subject, under the sway of automation, ICT and big machines. Finally, I further elaborate the specificity of the oblique perspective with the help of Lacan's theorem of the four discourses. Philosophical reflections on contemporary life sciences concur neither with a Master's discourse (which aims to strengthen the legitimacy and credibility of canonical sources), nor with university discourse (which aims to establish professional expertise), nor with what Lacan refers to as hysterical discourse (which aims to challenge representatives of the power establishment), but rather with the discourse of the analyst, listening with evenly-poised attention to the scientific files in order to bring to the fore the cupido sciendi (i.e. the will to know, but also to optimise and to control) which both inspires and disrupts contemporary life sciences discourse.

  13. Effects of laterally wedged insoles on symptoms and disease progression in medial knee osteoarthritis: a protocol for a randomised, double-blind, placebo controlled trial

    Directory of Open Access Journals (Sweden)

    Osborne Richard

    2007-09-01

    Full Text Available Abstract Background Whilst laterally wedged insoles, worn inside the shoes, are advocated as a simple, inexpensive, non-toxic self-administered intervention for knee osteoarthritis (OA, there is currently limited evidence to support their use. The aim of this randomised, double-blind controlled trial is to determine whether laterally wedges insoles lead to greater improvements in knee pain, physical function and health-related quality of life, and slower structural disease progression as well as being more cost-effective, than control flat insoles in people with medial knee OA. Methods/Design Two hundred participants with painful radiographic medial knee OA and varus malalignment will be recruited from the community and randomly allocated to lateral wedge or control insole groups using concealed allocation. Participants will be blinded as to which insole is considered therapeutic. Blinded follow up assessment will be conducted at 12 months after randomisation. The outcome measures are valid and reliable measures recommended for OA clinical trials. Questionnaires will assess changes in pain, physical function and health-related quality-of-life. Magnetic resonance imaging will measure changes in tibial cartilage volume. To evaluate cost-effectiveness, participants will record the use of all health-related treatments in a log-book returned to the assessor on a monthly basis. To test the effect of the intervention using an intention-to-treat analysis, linear regression modelling will be applied adjusting for baseline outcome values and other demographic characteristics. Discussion Results from this trial will contribute to the evidence regarding the effectiveness of laterally wedged insoles for the management of medial knee OA. Trial registration ACTR12605000503628; NCT00415259.

  14. Strike-Slip Fault Patterns on Europa: Obliquity or Polar Wander?

    Science.gov (United States)

    Rhoden, Alyssa Rose; Hurford, Terry A.; Manga, Michael

    2011-01-01

    Variations in diurnal tidal stress due to Europa's eccentric orbit have been considered as the driver of strike-slip motion along pre-existing faults, but obliquity and physical libration have not been taken into account. The first objective of this work is to examine the effects of obliquity on the predicted global pattern of fault slip directions based on a tidal-tectonic formation model. Our second objective is to test the hypothesis that incorporating obliquity can reconcile theory and observations without requiring polar wander, which was previously invoked to explain the mismatch found between the slip directions of 192 faults on Europa and the global pattern predicted using the eccentricity-only model. We compute predictions for individual, observed faults at their current latitude, longitude, and azimuth with four different tidal models: eccentricity only, eccentricity plus obliquity, eccentricity plus physical libration, and a combination of all three effects. We then determine whether longitude migration, presumably due to non-synchronous rotation, is indicated in observed faults by repeating the comparisons with and without obliquity, this time also allowing longitude translation. We find that a tidal model including an obliquity of 1.2?, along with longitude migration, can predict the slip directions of all observed features in the survey. However, all but four faults can be fit with only 1? of obliquity so the value we find may represent the maximum departure from a lower time-averaged obliquity value. Adding physical libration to the obliquity model improves the accuracy of predictions at the current locations of the faults, but fails to predict the slip directions of six faults and requires additional degrees of freedom. The obliquity model with longitude migration is therefore our preferred model. Although the polar wander interpretation cannot be ruled out from these results alone, the obliquity model accounts for all observations with a value

  15. Aerial Photography and Imagery, Oblique, 2008 Aerial Oblique imagery for Iredell County, NC, Published in 2008, 1:2400 (1in=200ft) scale, Iredell County GIS.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Aerial Photography and Imagery, Oblique dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Other information as of 2008. It is...

  16. Rainfall induced groundwater mound in wedge-shaped promontories: The Strack-Chernyshov model revisited

    Science.gov (United States)

    Kacimov, A. R.; Kayumov, I. R.; Al-Maktoumi, A.

    2016-11-01

    An analytical solution to the Poisson equation governing Strack's discharge potential (squared thickness of a saturated zone in an unconfined aquifer) is obtained in a wedge-shaped domain with given head boundary conditions on the wedge sides (specified water level in an open water body around a porous promontory). The discharge vector components, maximum elevation of the water table in promontory vertical cross-sections, quantity of groundwater seeping through segments of the wedge sides, the volume of fresh groundwater in the mound are found. For acute angles, the solution to the problem is non-unique and specification of the behaviour at infinity is needed. A "basic" solution is distinguished, which minimizes the water table height above a horizontal bedrock. MODFLOW simulations are carried out in a finite triangular island and compare solutions with a constant-head, no-flow and "basic" boundary condition on one side of the triangle. Far from the tip of an infinite-size promontory one has to be cautious with truncation of the simulated flow domains and imposing corresponding boundary conditions. For a right and obtuse wedge angles, there are no positive solutions for the case of constant accretion on the water table. In a particular case of a confined rigid wedge-shaped aquifer and incompressible fluid, from an explicit solution to the Laplace equation for the hydraulic head with arbitrary time-space varying boundary conditions along the promontory rays, essentially 2-D transient Darcian flows within the wedge are computed. They illustrate that surface water waves on the promontory boundaries can generate strong Darcian waves inside the porous wedge. Evaporation from the water table and sea-water intruded interface (rather than a horizontal bed) are straightforward generalizations for the Poissonian Strack potential.

  17. Effect of Laterally Wedged Insoles on the External Knee Adduction Moment across Different Reference Frames.

    Directory of Open Access Journals (Sweden)

    Satoshi Yamaguchi

    Full Text Available Biomechanical effects of laterally wedged insoles are assessed by reduction in the knee adduction moment. However, the degree of reduction may vary depending on the reference frame with which it is calculated. The purpose of this study was to clarify the effect of reference frame on the reduction in the knee adduction moment by laterally wedged insoles.Twenty-nine healthy participants performed gait trials with a laterally wedged insole and with a flat insole as a control. The knee adduction moment, including the first and second peaks and the angular impulse, were calculated using four different reference frames: the femoral frame, tibial frame, laboratory frame and the Joint Coordinate System.There were significant effects of reference frame on the knee adduction moment first and second peaks (P < 0.001 for both variables, while the effect was not significant for the angular impulse (P = 0.84. No significant interaction between the gait condition and reference frame was found in either of the knee adduction moment variables (P = 0.99 for all variables, indicating that the effects of laterally wedged insole on the knee adduction moments were similar across the four reference frames. On the other hand, the average percent changes ranged from 9% to 16% for the first peak, from 16% to 18% for the second peak and from 17% to 21% for the angular impulse when using the different reference frames.The effects of laterally wedged insole on the reduction in the knee adduction moment were similar across the reference frames. On the other hand, Researchers need to recognize that when the percent change was used as the parameter of the efficacy of laterally wedged insole, the choice of reference frame may influence the interpretation of how laterally wedged insoles affect the knee adduction moment.

  18. Prediction of knee joint moment changes during walking in response to wedged insole interventions.

    Science.gov (United States)

    Lewinson, Ryan T; Stefanyshyn, Darren J

    2016-04-01

    Wedged insoles are prescribed for medial knee osteoarthritis to reduce the knee adduction moment; however, it is currently not possible to predict which patients will in fact experience reduced moments. The purpose of this study was to identify a simple method using two-dimensional data for predicting the expected change in knee adduction moments with wedged insoles. Knee adduction moments during walking were determined for healthy individuals (n = 15) and individuals with medial knee osteoarthritis (n = 19) while wearing their own shoe without an insole (control), with a 6-mm medial wedge and with a 6-mm lateral wedge. The percent changes relative to control were determined. Then, participants completed single-step trials with each footwear condition where only the changes in mediolateral positions of the knee joint center, shank center of mass, ankle joint center, and foot center of mass relative to control were determined. These variables were used as predictors in regression equations where the change in knee adduction moment during walking was the dependent variable. The change in mediolateral positions of the lower extremity during a single step significantly predicted the change in knee adduction moment during walking for the lateral wedge in both the healthy (R(2) = 0.72, p = 0.008) and knee osteoarthritis (R(2) = 0.52, p = 0.026) groups, and also for the medial wedge in both the healthy (R(2) = 0.67, p = 0.016) and knee osteoarthritis (R(2) = 0.54, p = 0.020) groups. The method of using mediolateral position data from a single-step movement to predict walking biomechanics was successful. These data are relatively simple to collect and analyze, offering the possibility for future incorporation into a wedge prediction system. © IMechE 2016.

  19. The effect of shoe design and lateral wedges on knee load and neuromuscular control in healthy subjects during walking

    DEFF Research Database (Denmark)

    Mølgaard, Carsten Møller; Kersting, Uwe G.

    2013-01-01

    design/type on the effectiveness of lateral wedging has not been investigated so far. The Purpose of the present study was to explore alterations in knee loading due to lateral foot wedges in three different shoes. Methods: Thirteen healthy participants with no history of knee pain were tested using...... three-dimensional gait analysis. Barefoot walking, walking in a running shoe, an Oxford-type leather shoe, and a rocker shoe were analysed. The shoes were tested both with and without a 10-degree full-length laterally wedged insole. Results: There were significant shoe wedge interactions on the first...... and second peak knee adduction moments. However, the variability of this moment between shoe designs was of similar magnitude as the effect of laterally wedged insoles. Only marginal changes in muscle activity for gastrocnemius when walking with the wedged Oxford shoe were revealed. Conclusion: Lateral...

  20. Aerial Photography and Imagery, Oblique, Washburn County had oblique photography flight done in April of 2009. Pictometry was contracted for the project., Published in 2009, 1:4800 (1in=400ft) scale, Washburn County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Aerial Photography and Imagery, Oblique dataset current as of 2009. Washburn County had oblique photography flight done in April of 2009. Pictometry was contracted...

  1. Oblique abdominal muscle activity in standing and in sitting on hard and soft seats

    NARCIS (Netherlands)

    C.J. Snijders (Chris); M.P. Bakker (Martin); A. Vleeming (Andry); R. Stoeckart (Rob); H.J. Stam (Henk)

    1995-01-01

    textabstractThe activity of the oblique abdominal muscles was investigated with the trunk in unconstrained, symmetrical and static postures. Electromyographic recordings in six healthy subjects revealed that in all subjects the activity of both the internal and the external obliques is significantly

  2. Asteroseismic Determination of Obliquities of the Exoplanet Systems Kepler-50 and Kepler-65

    NARCIS (Netherlands)

    Chaplin, W.J.; Sanchis-Ojeda, R.; Campante, T.L.; Handberg, R.; Stello, D.; Winn, J.N.; Basu, S.; Christensen-Dalsgaard, J.; Davies, G.R.; Metcalfe, T.S.; Buchhave, L.A.; Fischer, D.A.; Bedding, T.R.; Cochran, W.D.; Elsworth, Y.; Gilliland, R.L.; Hekker, S.; Huber, D.; Isaacson, H.; Karoff, C.; Kawaler, S.D.; Kjeldsen, H.; Latham, D.W.; Lund, M.N.; Lundkvist, M.; Marcy, G.W.; Miglio, A.; Barclay, T.; Lissauer, J.J.

    2013-01-01

    Results on the obliquity of exoplanet host stars?the angle between the stellar spin axis and the planetary orbital axis?provide important diagnostic information for theories describing planetary formation. Here we present the first application of asteroseismology to the problem of stellar obliquity

  3. A numerical study on the oblique focus in MR-guided transcranial focused ultrasound

    Science.gov (United States)

    Hughes, Alec; Huang, Yuexi; Pulkkinen, Aki; Schwartz, Michael L.; Lozano, Andres M.; Hynynen, Kullervo

    2016-11-01

    Recent clinical data showing thermal lesions from treatments of essential tremor using MR-guided transcranial focused ultrasound shows that in many cases the focus is oblique to the main axis of the phased array. The potential for this obliquity to extend the focus into lateral regions of the brain has led to speculation as to the cause of the oblique focus, and whether it is possible to realign the focus. Numerical simulations were performed on clinical export data to analyze the causes of the oblique focus and determine methods for its correction. It was found that the focal obliquity could be replicated with the numerical simulations to within 23.2+/- {{13.6}\\circ} of the clinical cases. It was then found that a major cause of the focal obliquity was the presence of sidelobes, caused by an unequal deposition of power from the different transducer elements in the array at the focus. In addition, it was found that a 65% reduction in focal obliquity was possible using phase and amplitude corrections. Potential drawbacks include the higher levels of skull heating required when modifying the distribution of power among the transducer elements, and the difficulty at present in obtaining ideal phase corrections from CT information alone. These techniques for the reduction of focal obliquity can be applied to other applications of transcranial focused ultrasound involving lower total energy deposition, such as blood-brain barrier opening, where the issue of skull heating is minimal.

  4. Oblique abdominal muscle activity in standing and in sitting on hard and soft seats

    NARCIS (Netherlands)

    C.J. Snijders (Chris); M.P. Bakker (Martin); A. Vleeming (Andry); R. Stoeckart (Rob); H.J. Stam (Henk)

    1995-01-01

    textabstractThe activity of the oblique abdominal muscles was investigated with the trunk in unconstrained, symmetrical and static postures. Electromyographic recordings in six healthy subjects revealed that in all subjects the activity of both the internal and the external obliques is significantly

  5. Influences of deposition strategies and oblique angle on properties of AISI316L stainless steel oblique thin-walled part by direct laser fabrication

    Science.gov (United States)

    Wang, Xinlin; Deng, Dewei; Qi, Meng; Zhang, Hongchao

    2016-06-01

    Direct laser fabrication (DLF) developed from laser cladding and rapid prototyping technique has been widely used to fabricate thin-walled parts exhibiting more functions without expending weight and size. Oblique thin-walled parts accompanied with inhomogeneous mechanical properties are common in application. In the present study, a series of AISI316L stainless steel oblique thin-walled parts are successfully produced by DLF, in addition, deposition strategies, microstructure, and mechanical property of the oblique thin-walled parts are investigated. The results show that parallel deposition way is more valuable to fabricate oblique thin-walled part than oblique deposition way, because of the more remarkable properties. The hardness of high side initially increases until the distance to the substrate reaches about 25 mm, and then decreases with the increase of the deposition height. Oblique angle has a positive effect on the tensile property but a negative effect on microstructure, hardness and elongation due to the more tempering time. The maximum average ultimate tensile strength (UTS) and elongation are presented 744.3 MPa and 13.5% when the angle between tensile loading direction and horizontal direction is 45° and 90°, respectively.

  6. Total knee arthroplasty after failed high tibial osteotomy: a systematic review of open versus closed wedge osteotomy.

    Science.gov (United States)

    Han, Jae Hwi; Yang, Jae-Hyuk; Bhandare, Nikhl N; Suh, Dong Won; Lee, Jong Seong; Chang, Yong Suk; Yeom, Ji Woong; Nha, Kyung Wook

    2016-08-01

    Medial opening wedge high tibial osteotomy (HTO) has become increasingly popular as an alternative to lateral closing wedge osteotomy for the treatment of medial compartment knee osteoarthritis with varus deformity. The present systematic review was conducted to provide an objective analysis of total knee arthroplasty (TKA) outcomes following previous knee osteotomy (medial opening wedge vs. lateral closing wedge). A literature search of online databases (MEDLINE, EMBASE, Cochrane Library database) was made, in addition to manual search of major orthopaedic journals. The methodological quality of each of the studies was assessed on the Newcastle-Ottawa Scale and Effective Practice and Organization of Care. A total of ten studies were included in the review. There were eight studies with Level IV and two studies with Level III evidence. Eight studies reported clinical and radiologic scores. Comparative studies between TKA following medial opening and lateral closing wedge HTO did not demonstrate statistically significant clinical and radiologic differences. The revision rates were similar. However, more technical issues during TKA surgery after lateral closing wedge HTO were mentioned than the medial open wedge group. The quadriceps snip, tibial tubercle osteotomy, and lateral soft tissue release were more frequently needed in the lateral closing wedge HTO group. In addition, because of loss of proximal tibia bone geometry in the lateral closing wedge HTO group, concerns such as tibia stem impingement in the lateral tibial cortex was noted. The present systematic review suggests that TKA after medial opening and lateral closing wedge HTO showed similar performance. Clinical and radiologic outcome including revision rates did not statistically differ from included studies. However, there are more surgical technical concerns in TKA conversion from lateral closing wedge HTO than from the medial opening wedge HTO group. IV.

  7. Effect of oblique impact on impact strength of planetesimals

    Science.gov (United States)

    Yasui, Minami; Yoshida, Yusaku; Matsue, Kazuma; Takano, Shota; Arakawa, Masahiko; Ogawa, Kazunori; Okamoto, Chisato

    2016-10-01

    Collisional processes among planetesimals have played an important role for the formation and the evolution of the bodies in the solar system. Some researchers conducted impact experiments to examine the effects of target material, impact velocity, etc., on the impact strength. Planetesimals could collide with each other at various impact angles. Therefore, the effect of impact angle on the impact strength should be examined, but there are only a few studies about oblique impact experiments. In this study, we conducted oblique impact experiments of porous gypsum and glass spheres simulating planetesimals and examined the effect of the impact angle on the impact strength.We used a porous gypsum sphere and a glass sphere as a target. We carried out impact experiments by using two-stage H2 gas gun at Kobe University. A polycarbonate spherical projectile was accelerated at 2 to 7 km/s. The impact angle, θ, changed from 10° to 90° (90° at a head-on impact). The impact phenomena were observed by a high-speed camera to measure the fragment velocities.The impact strength Q* is defined as an energy density Q, which is the kinetic energy of impactor normalized by the target mass, when the largest fragment mass is half of the original target mass. In both cases of porous gypsum and glass targets, the Q* became larger as the θ decreased. We reanalyzed our results by using the effective energy density, Qc*, defined as Qsin2θ and we found that the results of oblique impacts matched with those of a head-on impact. Furthermore, the relationship between the Qc and the normalized largest fragment mass, ml/Mt, could be fitted by ml/Mt=A×Qc-p and the parameters, A and p, were 82.2 and 0.72 for a porous gypsum target and 1.1×106 and 2.12 for a glass target, respectively. We defined the impact strength Qc* by using the Qc, and the Qc* was about 1000 J/kg for both targets. The power p for a glass target was about 3 times larger than that for a porous gypsum target. This means

  8. RUPTURE OF THIN METAL TUBES BY NORMAL AND OBLIQUE IMPACT OF BLUNT CONICALNOSED MISSILES: EXPERIMENTS

    Institute of Scientific and Technical Information of China (English)

    Mu Jianchun; Zhang Tieguang

    2000-01-01

    Impact tests at both normal and oblique angles of incidence were .conducted on thin mild tubes using a moderate size of 90° conical-nosed missiles. Tne minimum impact speed that generated cracks through the thickness of the wall, termed the speed for rupture, was measured, and various modes of rupture were identified. For a thin tube hit by a missile at a normal angle of obliquity at the speed for rupture, the contact region spreads across the nose of the missile, and the transverse shear deformation is predominant in the final failure process. If the angle of obliquity is 30°, the missile pierces a hole through the wall of the tube. At the speed for rupture, the kinetic energy of the missile for oblique angle 30° is only about 45 % that required for plugging at a normal angle of obliquity.

  9. Penetration of sandwich plates with hybrid-cores under oblique ballistic impact

    Directory of Open Access Journals (Sweden)

    Changye Ni

    2014-01-01

    Full Text Available The oblique penetration performance of lightweight hybrid-cored sandwich plates are investigated numerically. To compose the hybrid-core, ceramic prisms are inserted into pyramidal metal lattice trusses and fixed using epoxy resin. Three-dimensional finite element simulations are carried out for the hybridcored sandwich impacted at 15°, 30°, 45°, and 60° obliquity by a hemispherical projectile. The ballistic limit, the energy absorbed by the constituting elements, and the critical oblique angle are quantified. The physical mechanisms underlying the failure and the influence of fundamental system parameters are explored. The angle of obliquity is found to have significant influence on the ballistic trajectory and erosion of the projectile, thus it is important for the impact response and penetration resistance of the sandwich. For oblique angles equal to or larger than 45°, the projectile moves mainly horizontally and can not effectively penetrate across the sandwich.

  10. Wedge filling and interface delocalization in finite Ising lattices with antisymmetric surface fields

    Science.gov (United States)

    Milchev, Andrey; Müller, M.; Binder, K.; Landau, D. P.

    2003-09-01

    Theoretical predictions by Parry et al. for wetting phenomena in a wedge geometry are tested by Monte Carlo simulations. Simple cubic L×L×Ly Ising lattices with nearest neighbor ferromagnetic exchange and four free L×Ly surfaces, at which antisymmetric surface fields ±Hs act, are studied for a wide range of linear dimensions (4⩽L⩽320, 30⩽Ly⩽1000), in an attempt to clarify finite size effects on the wedge filling transition in this “double-wedge” geometry. Interpreting the Ising model as a lattice gas, the problem is equivalent to a liquid-gas transition in a pore with quadratic cross section, where two walls favor the liquid and the other two walls favor the gas. For temperatures T below the bulk critical temperature Tc this boundary condition (where periodic boundary conditions are used in the y direction along the wedges) leads to the formation of two domains with oppositely oriented magnetization and separated by an interface. For L,Ly→∞ and T larger than the filling transition temperature Tf(Hs), this interface runs from the one wedge where the surface planes with a different sign of the surface field meet (on average) straight to the opposite wedge, so that the average magnetization of the system is zero. For Tinterface is bound either to the wedge where the two surfaces with field -Hs meet (then the total magnetization m of the system is positive) or to the opposite wedge (then minterface midpoint from the wedges is studied as T→Tf(Hs) from below, as is the corresponding behavior of the magnetization and its moments. We consider the variation of l0 for T>Tf(Hs) as a function of a bulk field and find that the associated exponents agree with theoretical predictions. The correlation length ξy in the y direction along the wedges is also studied, and we find no transition for finite L and Ly→∞. For L→∞ the prediction l0∝(Hsc-Hs)-1/4 is verified, where Hsc(T) is the inverse function of Tf(Hs) and ξy∝(Hsc-Hs)-3/4, respectively. We

  11. Study and evaluation of the Siemens virtual wedge factor: dosimetric monitor system and variable field effects

    Energy Technology Data Exchange (ETDEWEB)

    Sendon Rio, J R Sendon; Martinez, C Otero; GarcIa, M Sanchez; Busto, R Lobato; Vega, V Luna; Sueiro, J Mosquera; Camean, M Pombar [Servizo de Radiofisica e Proteccion Radioloxica, Complexo Hospitalario Universitario de Santiago de Compostela (CHUS), Santiago de Compostela (Spain)], E-mail: jose.ramon.sendon.del.rio@sergas.es

    2008-03-07

    In the year 1997 Siemens introduced the virtual wedge in its accelerators. The idea was that a dose profile similar to that of a physical wedge can be obtained by moving one of the accelerator jaws at a constant speed while the dose rate is changing. This work explores the observed behaviour of virtual wedge factors. A model is suggested which takes into account that at any point in time, when the jaw moves, the dose at a point of interest in the phantom is not only due to the direct beam. It also depends on the scattered radiation in the phantom, the head scatter and the behaviour of the monitoring system of the accelerator. Measurements are performed in a Siemens Primus accelerator and compared to the model predictions. It is shown that the model agrees reasonably well with measurements spanning a wide range of conditions. A strong dependence of virtual wedge factors on the dosimetric board has been confirmed and an explanation has been given on how the balance between different contributions is responsible for virtual wedge factors values.

  12. Analysis of bonded anisotropic wedges with interface crack under anti-plane shear loading

    Institute of Scientific and Technical Information of China (English)

    M.GHADIRI; A.R.SHAHANI

    2014-01-01

    The antiplane stress analysis of two anisotropic finite wedges with arbitrary radii and apex angles that are bonded together along a common edge is investigated. The wedge radial boundaries can be subjected to displacement-displacement boundary condi-tions, and the circular boundary of the wedge is free from any traction. The new finite complex transforms are employed to solve the problem. These finite complex transforms have complex analogies to both kinds of standard finite Mellin transforms. The traction free condition on the crack faces is expressed as a singular integral equation by using the exact analytical method. The explicit terms for the strength of singularity are extracted, showing the dependence of the order of the stress singularity on the wedge angle, material constants, and boundary conditions. A numerical method is used for solving the resul-tant singular integral equations. The displacement boundary condition may be a general term of the Taylor series expansion for the displacement prescribed on the radial edge of the wedge. Thus, the analysis of every kind of displacement boundary conditions can be obtained by the achieved results from the foregoing general displacement boundary condition. The obtained stress intensity factors (SIFs) at the crack tips are plotted and compared with those obtained by the finite element analysis (FEA).

  13. Seismic evidence for a cold serpentinized mantle wedge beneath Mount St Helens.

    Science.gov (United States)

    Hansen, S M; Schmandt, B; Levander, A; Kiser, E; Vidale, J E; Abers, G A; Creager, K C

    2016-11-01

    Mount St Helens is the most active volcano within the Cascade arc; however, its location is unusual because it lies 50 km west of the main axis of arc volcanism. Subduction zone thermal models indicate that the down-going slab is decoupled from the overriding mantle wedge beneath the forearc, resulting in a cold mantle wedge that is unlikely to generate melt. Consequently, the forearc location of Mount St Helens raises questions regarding the extent of the cold mantle wedge and the source region of melts that are responsible for volcanism. Here using, high-resolution active-source seismic data, we show that Mount St Helens sits atop a sharp lateral boundary in Moho reflectivity. Weak-to-absent PmP reflections to the west are attributed to serpentinite in the mantle-wedge, which requires a cold hydrated mantle wedge beneath Mount St Helens (<∼700 °C). These results suggest that the melt source region lies east towards Mount Adams.

  14. Medial Closing-Wedge Distal Femoral Osteotomy for Genu Valgum With Lateral Compartment Disease.

    Science.gov (United States)

    Wylie, James D; Maak, Travis G

    2016-12-01

    Lateral compartment disease combined with valgus alignment can lead to progressive knee joint degeneration. In the symptomatic patient with isolated lateral compartment disease, a varus-producing distal femoral osteotomy can unload the diseased lateral compartment. This osteotomy may be combined with other cartilage or meniscal restorative techniques to optimize knee joint preservation and pain relief. The osteotomy can be performed with a medial closing-wedge or lateral opening-wedge technique. Both techniques have been reported to improve knee-related quality of life in patients with lateral compartment disease. Advantages of the medial closing-wedge technique are direct bone apposition leading to inherent stability of the construct, as well as reliable bony healing, and less hardware irritation. Advantages of the lateral opening-wedge technique are a single bony cut and therefore more of an ability to adjust correction intraoperatively. However, this technique requires bone grafting and has a high rate of hardware irritation or removal. We present a surgical technique for the medial closing-wedge distal femoral osteotomy using an anteromedial-distal femoral locking plate.

  15. Simulation of water entry of an elastic wedge using the FDS scheme and HCIB method

    Institute of Scientific and Technical Information of China (English)

    SHIN Sangmook; BAE Sung Yong

    2013-01-01

    The hydroelasticity of water entry of an elastic wedge is simulated using a code developed using the flux-difference splitting scheme for immiscible and incompressible fluids and the hybrid Cartesian/immersed boundary method.The free surface is regarded as a moving contact discontinuity and is captured without any additional treatment along the interface.Immersed boundary nodes are distributed inside a fluid domain based on the edges that cross an instantaneous body boundary.Dependent variables are reconstructed at each immersed boundary node with the help of an interpolation along a local normal line for providing a boundary condition for a discretized flow problem.A dynamic beam equation is used for modeling the elastic deformation of a wedge.The developed code is validated through comparisons with other experimental and computational results for a free-falling wedge.The effects of the elastic deformation of the wedge on the pressure fields and time histories of the impact force are investigated in relation to the stiffness and density of the structure.Grid independence test is carried out for the computed time history of the force acting on an elastic wedge.

  16. Measurement of photoneutron dose produced by wedge filters of a high energy linac using polycarbonate films.

    Science.gov (United States)

    Hashemi, Seyed Mehdi; Hashemi-Malayeri, Bijan; Raisali, Gholamreza; Shokrani, Parvaneh; Sharafi, Ali Akbar; Torkzadeh, Falamarz

    2008-05-01

    Radiotherapy represents the most widely spread technique to control and treat cancer. To increase the treatment efficiency, high energy linacs are used. However, applying high energy photon beams leads to a non-negligible dose of neutrons contaminating therapeutic beams. In addition, using conventional linacs necessitates applying wedge filters in some clinical conditions. However, there is not enough information on the effect of these filters on the photoneutrons produced. The aim of this study was to investigate the change of photoneutron dose equivalent due to the use of linac wedge filters. A high energy (18 MV) linear accelerator (Elekta SL 75/25) was studied. Polycarbonate films were used to measure the dose equivalent of photoneutrons. After electrochemical etching of the films, the neutron dose equivalent was calculated using Hp(10) factor, and its variation on the patient plane at 0, 5, 10, 50 and 100 cm from the center of the X-ray beam was determined. By increasing the distance from the center of the X-ray beam towards the periphery, the photoneutron dose equivalent decreased rapidly for the open and wedged fields. Increasing of the field size increased the photoneutron dose equivalent. The use of wedge filter increased the proportion of the neutron dose equivalent. The increase can be accounted for by the selective absorption of the high energy photons by the wedge filter.

  17. Oblique solitary waves in a five component plasma

    Energy Technology Data Exchange (ETDEWEB)

    Sijo, S.; Manesh, M.; Sreekala, G.; Venugopal, C., E-mail: cvgmgphys@yahoo.co.in [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam, 686 560 Kerala (India); Neethu, T. W. [Department of Physics, CMS College, Mahatma Gandhi University, Kottayam, 686 001 Kerala (India); Renuka, G. [Kerala State Council for Science, Technology and Environment, Thiruvananthapuram, 695 004 Kerala (India)

    2015-12-15

    We investigate the influence of a second electron component on oblique dust ion acoustic solitary waves in a five component plasma consisting of positively and negatively charged dust, hydrogen ions, and hotter and colder electrons. Of these, the heavier dust and colder photo-electrons are of cometary origin while the other two are of solar origin; electron components are described by kappa distributions. The K-dV equation is derived, and different attributes of the soliton such as amplitude and width are plotted for parameters relevant to comet Halley. We find that the second electron component has a profound influence on the solitary wave, decreasing both its amplitude and width. The normalized hydrogen density strongly influences the solitary wave by decreasing its width; the amplitude of the solitary wave, however, increases with increasing solar electron temperatures.

  18. Titan's Obliquity as evidence for a subsurface ocean?

    CERN Document Server

    Baland, Rose-Marie; Yseboodt, Marie; Karatekin, Ozgur

    2011-01-01

    On the basis of gravity and radar observations with the Cassini spacecraft, the moment of inertia of Titan and the orientation of Titan's rotation axis have been estimated in recent studies. According to the observed orientation, Titan is close to the Cassini state. However, the observed obliquity is inconsistent with the estimate of the moment of inertia for an entirely solid Titan occupying the Cassini state. We propose a new Cassini state model for Titan in which we assume the presence of a liquid water ocean beneath an ice shell and consider the gravitational and pressure torques arising between the different layers of the satellite. With the new model, we find a closer agreement between the moment of inertia and the rotation state than for the solid case, strengthening the possibility that Titan has a subsurface ocean.

  19. Horizontal effect of the surgical weakening of the oblique muscles

    Directory of Open Access Journals (Sweden)

    Carlos Souza-Dias

    2011-06-01

    Full Text Available PURPOSE: To evaluate the influence of the oblique muscles surgical weakening on the horizontal alignment in the primary position (PP and its efficacy on the correction of the "A" and "V" anisotropies. METHODS: In order to study the influence of bilateral superior oblique muscles (SO weakening on the horizontal alignment in PP, we analyzed the files of 12 patients who underwent only that operation; no other muscle was operated on. We took the opportunity of those 12 patients to analyze the effect of their operation on the correction of "A" incomitance. For evaluating the effect of the inferior oblique muscles (IO weakening on the correction of the "V" pattern, we analyzed retrospectively the files of 67 anisotropic patients who underwent a bilateral SO weakening. In 10 of them, the only operation was the oblique muscles weakening and, in 57 patients, the horizontal recti were also operated on for the horizontal deviations in primary position. These patients were divided into two groups: 50 were esotropic and 17 exotropic. There was not any mixed anisotropy. RESULTS: The mean value of the preoperative "V" incomitance of the 50 esotropic patients was 24.25∆ ± 10.15∆; the mean postoperative correction was 15.56 ∆ ± 8.74∆. The mean correction between the PP and upgaze was 7.52∆ ± 7.47∆ and from the PP to downgaze was 8.56∆ ± 9.21∆. The same values of the 17 exotropic patients was: preoperative 31.88∆ ± 9.4∆; primary position to upgaze was 13.11∆ ± 4.9∆ and primary position to downgaze 14.11∆ ± 12.48∆. The mean preoperative value of the "A" incomitance among the 12 patients who underwent isolated SO weakening was 30.50∆ ± 19.25∆ and the postoperative was of 9,92∆, therefore a mean correction of 22.58∆ ± 17.54∆. Among these ones, in 5 there was no alteration of the deviation in primary position, in 4 there was an exo-effect and in 3 there was an eso-effect. The mean alteration of the deviation in PP was an

  20. Nonlinear evolution of oblique whistler waves in radiation belts

    Science.gov (United States)

    Sharma, R. P.; Nandal, P.; Yadav, N.; Sharma, Swati

    2017-02-01

    Magnetic power spectrum and formation of coherent structures have been investigated in the present work applicable to Van Allen radiation belt. The nonlinear interaction of high frequency oblique whistler wave and low frequency magnetosonic wave has been investigated. Simulation was performed of the coupled equation of these two waves. The nonlinear interaction of these waves leads to the formation of the localized structures. These resulting localized structures are of complex nature. The associated magnetic power spectrum has also been studied. Dispersive nonlinear processes account for the high frequency part of the spectrum. The resulting magnetic power spectrum shows a scaling of k^{ - 4.5}. The energy transfer process from injection scales to smaller scales is explained by the results.

  1. Sensitivity analysis for oblique incidence reflectometry using Monte Carlo simulations

    DEFF Research Database (Denmark)

    Kamran, Faisal; Andersen, Peter E.

    2015-01-01

    Oblique incidence reflectometry has developed into an effective, noncontact, and noninvasive measurement technology for the quantification of both the reduced scattering and absorption coefficients of a sample. The optical properties are deduced by analyzing only the shape of the reflectance...... profiles. This article presents a sensitivity analysis of the technique in turbid media. Monte Carlo simulations are used to investigate the technique and its potential to distinguish the small changes between different levels of scattering. We present various regions of the dynamic range of optical...... properties in which system demands vary to be able to detect subtle changes in the structure of the medium, translated as measured optical properties. Effects of variation in anisotropy are discussed and results presented. Finally, experimental data of milk products with different fat content are considered...

  2. Oblique aerial images and their use in cultural heritage documentation

    DEFF Research Database (Denmark)

    Höhle, Joachim

    2013-01-01

    on automatically derived point clouds of high density. Each point will be supplemented with colour and other attributes. The problems experienced in these processes and the solutions to these problems are presented. The applied tools are a combination of professional tools, free software, and of own software...... developments. Special attention is given to the quality of input images. Investigations are carried out on edges in the images. The combination of oblique and nadir images enables new possibilities in the processing. The use of the near-infrared channel besides the red, green, and blue channel of the applied...... multispectral imagery is also of advantage. Vegetation close to the object of interest can easily be removed. A second example describes the modelling of a monument by means of a non-metric camera and a standard software package. The presented results regard achieved geometric accuracy and image quality...

  3. Kramers-Kronig analysis of reflectance measured at oblique incidence.

    Science.gov (United States)

    Berreman, D W

    1967-09-01

    Kramers-Kronig analysis of spectra of reflectance has usually been done only with radiation incident as nearly normal to the sample surface as possible. Any effects of obliquity have been assumed to be negligible. However, it is not much more difficult or time consuming to do Kramers-Kronig analysis of spectra taken with almost any angle of incidence, provided that polarized radiation is used to obtain the data. The method for such analysis for radiation incident at almost any angle is described in this paper. The method fails with pi polarized radiation if the angle of incidence lies between the two somewhat different Brewster angles at the high and low frequency ends of the spectrum. The rather small error in a typical analysis caused by neglecting a 15 degrees angle of incidence is illustrated.

  4. An oblique pulsar magnetosphere with a plasma conductivity

    CERN Document Server

    Cao, Gang; Sun, Sineng

    2016-01-01

    An oblique pulsar magnetosphere with a plasma conductivity is studied by using a pseudo-spectral method. In the pseudo-spectral method, the time-dependent Maxwell equations are solved, both electric and magnetic fields are expanded in terms of the vector spherical harmonic (VSH) functions in spherical geometry and the divergencelessness of magnetic field is analytically enforced by a projection method. The pulsar magnetospheres in infinite (i. e., force-free approximation) and finite conductivities are simulated and a family of solutions that smoothly transition from the Deutsch vacuum solution to the force-free solution are obtained. The $\\sin^2\\alpha$ dependence of the spin-down luminosity on the magnetic inclination angle $\\alpha$ in which the full electric current density are taken into account is retrieved in the force-free regime.

  5. Oblique cross-waves in horizontally vibrated containers

    Energy Technology Data Exchange (ETDEWEB)

    Pérez-Gracia, José M; Porter, Jeff; Varas, Fernando; Vega, José M, E-mail: fernando.varas@upm.es [ETSI Aeronáuticos, Univ. Politécnica de Madrid, Pl. Cardenal Cisneros, 3, 28040 Madrid (Spain)

    2014-08-01

    The excitation of subharmonic waves on the free surface of a horizontally vibrated, rectangular container of liquid is considered and the properties of threshold patterns are obtained and discussed. These waves are generally quasiperiodic and oblique (not aligned with the container walls). The parametric forcing mechanism generated by the harmonic oscillatory bulk flow is assumed to dominate over that associated with harmonic surface waves and a linear theory recently developed by the authors [Perez-Gracia et al 2014 J. Fluid Mech. 739 196–228] is used to compute both the threshold forcing amplitude and the pattern orientation. Two distinct regimes are considered: (1) large containers where the subharmonic waves generated at each endwall do not interact appreciably and (2) smaller containers where interaction occurs. The nature of the critical eigenfunction is examined in each case, and a contrast drawn between pure 2:1 resonance and the general case of quasiperiodic instability. (paper)

  6. Bipolar supernova remnants and the obliquity dependence of shock acceleration

    Science.gov (United States)

    Fulbright, Michael S.; Reynolds, Stephen P.

    1990-01-01

    The diffusive shock acceleration mechanism proposed to explain the bipolarity observed in the synchrotron radio emission of young adiabatically expanding shell SNRs is investigated by means of numerical simulations. The theoretical basis of the SNR models and the numerical computation methods are explained, and the results are presented in graphs and synthetic radio maps and discussed in detail. It is found that the efficiency of the acceleration process depends on the obliquity angle theta(Bn) between the shock normal and the uniform magnetic field: models with theta(Bn) of about 90 deg can reproduce the observed azimuthal intensity ratios in most cases, but models with theta(Bn) near 0 deg cannot.

  7. Bipolar supernova remnants and the obliquity dependence of shock acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Fulbright, M.S.; Reynolds, S.P. (North Carolina State Univ., Raleigh (USA))

    1990-07-01

    The diffusive shock acceleration mechanism proposed to explain the bipolarity observed in the synchrotron radio emission of young adiabatically expanding shell SNRs is investigated by means of numerical simulations. The theoretical basis of the SNR models and the numerical computation methods are explained, and the results are presented in graphs and synthetic radio maps and discussed in detail. It is found that the efficiency of the acceleration process depends on the obliquity angle theta(Bn) between the shock normal and the uniform magnetic field: models with theta(Bn) of about 90 deg can reproduce the observed azimuthal intensity ratios in most cases, but models with theta(Bn) near 0 deg cannot. 32 refs.

  8. Asymmetric diffusion model for oblique-incidence reflectometry

    Institute of Scientific and Technical Information of China (English)

    Yaqin Chen; Liji Cao; Liqun Sun

    2011-01-01

    A diffusion theory model induced by a line source distribution is presented for oblique-incidence reflectom-etry. By fitting to this asymmetric diffusion model, the absorption and reduced scattering coefficients μa and μ's of the turbid medium can both be determined with accuracy of 10% from the absolute profile of the diffuse reflectance in the incident plane at the negative position -1.5 transport mean free path (mfp') away from the incident point; particularly, μ's can be estimated from the data at positive positions within 0-1.0 mfp' with 10% accuracy. The method is verified by Monte Carlo simulations and experimentally tested on a phantom.%A diffusion theory model induced by a line source distribution is presented for oblique-incidence reflectometry.By fitting to this asymmetric diffusion model,the absorption and reduced scattering coefficients μa and μ's of the turbid medium can both be determined with accuracy of 10% from the absolute profile of the diffuse reflectance in the incident plane at the negative position -1.5 transport mean free path (mfp')away from the incident point;particularly,μ's can be estimated from the data at positive positions within 0-1.0 mfp' with 10% accuracy.The method is verified by Monte Carlo simulations and experimentally tested on a phantom.Knowledge about the optical properties,including the absorption coefficient (μa) and the reduced scattering coefficient (μ's =μs(1-g)),where μs is the scattering coefficient and g is the anisotropy factor of scattering,of biological tissues plays an important role for optical therapeutic and diagnostic techniques in medicine.

  9. Obliquity-paced Pliocene West Antarctic ice sheet oscillations

    Science.gov (United States)

    Naish, T.; Powell, R.; Levy, R.; Wilson, G.; Scherer, R.; Talarico, F.; Krissek, L.; Niessen, F.; Pompilio, M.; Wilson, T.; Carter, L.; DeConto, R.; Huybers, P.; McKay, R.; Pollard, D.; Ross, J.; Winter, D.; Barrett, P.; Browne, G.; Cody, R.; Cowan, E.; Crampton, J.; Dunbar, G.; Dunbar, N.; Florindo, F.; Gebhardt, C.; Graham, I.; Hannah, M.; Hansaraj, D.; Harwood, D.; Helling, D.; Henrys, S.; Hinnov, L.; Kuhn, G.; Kyle, P.; Laufer, A.; Maffioli, P.; Magens, D.; Mandernack, K.; McIntosh, W.; Millan, C.; Morin, R.; Ohneiser, C.; Paulsen, T.; Persico, D.; Raine, I.; Reed, J.; Riesselman, C.; Sagnotti, L.; Schmitt, D.; Sjunneskog, C.; Strong, P.; Taviani, M.; Vogel, S.; Wilch, T.; Williams, T.

    2009-01-01

    Thirty years after oxygen isotope records from microfossils deposited in ocean sediments confirmed the hypothesis that variations in the Earth's orbital geometry control the ice ages, fundamental questions remain over the response of the Antarctic ice sheets to orbital cycles. Furthermore, an understanding of the behaviour of the marine-based West Antarctic ice sheet (WAIS) during the 'warmer-than-present' early-Pliocene epoch (???5-3 Myr ago) is needed to better constrain the possible range of ice-sheet behaviour in the context of future global warming. Here we present a marine glacial record from the upper 600 m of the AND-1B sediment core recovered from beneath the northwest part of the Ross ice shelf by the ANDRILL programme and demonstrate well-dated, ???40-kyr cyclic variations in ice-sheet extent linked to cycles in insolation influenced by changes in the Earth's axial tilt (obliquity) during the Pliocene. Our data provide direct evidence for orbitally induced oscillations in the WAIS, which periodically collapsed, resulting in a switch from grounded ice, or ice shelves, to open waters in the Ross embayment when planetary temperatures were up to ???3??C warmer than today and atmospheric CO 2 concentration was as high as ???400 p.p.m.v. (refs 5, 6). The evidence is consistent with a new ice-sheet/ice-shelf model that simulates fluctuations in Antarctic ice volume of up to +7 m in equivalent sea level associated with the loss of the WAIS and up to +3 m in equivalent sea level from the East Antarctic ice sheet, in response to ocean-induced melting paced by obliquity. During interglacial times, diatomaceous sediments indicate high surface-water productivity, minimal summer sea ice and air temperatures above freezing, suggesting an additional influence of surface melt under conditions of elevated CO2. ??2009 Macmillan Publishers Limited. All rights reserved.

  10. The synthesis and adsorption properties of some carbohydrate-terminated dendrimer wedges

    CERN Document Server

    Ainsworth, R L

    1997-01-01

    A range of dendritic molecules that are designed to bind to a cotton surface has been synthesised. The architecture of the molecules allows the location of various functional, property modifying units at the focus and the attachment of recognition groups at the periphery of a dendritic molecule with wedge topology. The synthesis and characterisation of dendrimer wedges up to the second generation using a divergent approach has been performed. These wedges are readily built up using a simple and efficient stepwise pathway from the central core, and surface recognising species are subsequently attached to the molecule utilising procedures developed in conjunction with Unilever Research Laboratories. Work has been carried out to assess their adsorption onto a cotton surface and the postulated adsorption mechanism is discussed.

  11. Open wedge metatarsal osteotomy versus crescentic osteotomy to correct severe hallux valgus deformity

    DEFF Research Database (Denmark)

    Wester, Jens Ulrik; Hamborg-Petersen, Ellen; Herold, Niels

    2016-01-01

    BACKGROUND: Different techniques of proximal osteotomies have been introduced to correct severe hallux valgus. The open wedge osteotomy is a newly introduced method for proximal osteotomy. The aim of this prospective randomized study was to compare the radiological and clinical results after...... operation for severe hallux valgus, comparing the open wedge osteotomy to the crescentic osteotomy which is our traditional treatment. METHODS: Forty-five patients with severe hallux valgus (hallux valgus angle >35̊, and intermetatarsal angle >15̊) were included in this study. The treatment was proximal...... open wedge osteotomy and fixation with plate (Hemax), group 1, or operation with proximal crescentic osteotomy and fixation with a 3mm cannulated screw, group 2. The mean age was 52 years (19-71). Forty-one females and four males were included. Clinical and radiological follow-ups were performed 4...

  12. Wedge Shock and Nozzle Exhaust Plume Interaction in a Supersonic Jet Flow

    Science.gov (United States)

    Castner, Raymond; Zaman, Khairul; Fagan, Amy; Heath, Christopher

    2014-01-01

    Fundamental research for sonic boom reduction is needed to quantify the interaction of shock waves generated from the aircraft wing or tail surfaces with the nozzle exhaust plume. Aft body shock waves that interact with the exhaust plume contribute to the near-field pressure signature of a vehicle. The plume and shock interaction was studied using computational fluid dynamics and compared with experimental data from a coaxial convergent-divergent nozzle flow in an open jet facility. A simple diamond-shaped wedge was used to generate the shock in the outer flow to study its impact on the inner jet flow. Results show that the compression from the wedge deflects the nozzle plume and shocks form on the opposite plume boundary. The sonic boom pressure signature of the nozzle exhaust plume was modified by the presence of the wedge. Both the experimental results and computational predictions show changes in plume deflection.

  13. Stress singularity in a top of composite wedge with internal functionally graded material

    Directory of Open Access Journals (Sweden)

    Victor V. Tikhomirov

    2015-10-01

    Full Text Available The antiplane problem of the composite wedge consisting of two homogeneous external wedge-shaped areas and an intermediate zone of the interphase is studied. The interphase material is assumed functionally graded. It is shown that the problem in each area is harmonic within the quadratic law of inhomogeneity of the material in the transverse direction. The influence of the interphase on the stress state at the top of the wedge is analyzed. As compared to the ideal contact of external materials, the presence of the interphase leads both to decrease and increase in the singularity exponent. Moreover, the stress asymptotic may have two singular terms for some values of the composite parameters.

  14. Water Impact of Rigid Wedges in Two-Dimensional Fluid Flow

    Directory of Open Access Journals (Sweden)

    Sawan Shah

    2015-01-01

    Full Text Available A combined experimental and numerical investigation was conducted into impact of rigid wedges on water in two-dimensional fluid conditions. Drop test experiments were conducted involving symmetric rigid wedges of varying angle and mass impacted onto water. The kinematic behaviour of the wedge and water was characterised using high-speed video. Numerical models were analysed in LS-DYNA® that combined regions of Smoothed Particle Hydrodynamics particles and a Lagrangian element mesh. The analysis captured the majority of experimental results and trends, within the bounds of experimental variance. Further, the combined modelling technique presented a highly attractive combination of computational efficiency and accuracy, making it a suitable candidate for aircraft ditching investigations.

  15. A quantum hybrid with a thin antenna at the vertex of a wedge

    Energy Technology Data Exchange (ETDEWEB)

    Carlone, Raffaele, E-mail: raffaele.carlone@unina.it [Università “Federico II” di Napoli, Dipartimento di Matematica e Applicazioni “R. Caccioppoli”, MSA, via Cinthia, I-80126, Napoli (Italy); Posilicano, Andrea, E-mail: andrea.posilicano@uninsubria.it [DiSAT, Università dell' Insubria, via Valleggio 11, I-22100, Como (Italy)

    2017-03-26

    We study the spectrum, resonances and scattering matrix of a quantum Hamiltonian on a “hybrid surface” consisting of a half-line attached by its endpoint to the vertex of a concave planar wedge. At the boundary of the wedge, outside the vertex, homogeneous Dirichlet conditions are imposed. The system is tunable by varying the measure of the angle at the vertex. - Highlights: • Spectral characterization of a quantum Hamiltonian on “hybrid surface” consisting of a halfline attached to the vertex of a concave planar wedge. • The system is tunable by varying the measure of the angle at the vertex. • Relation between the conduction properties inside the hybrid and formation of resonances. • Easy generalization of the results to more complicated structures.

  16. Pervasive seismic wave reflectivity and metasomatism of the Tonga mantle wedge.

    Science.gov (United States)

    Zheng, Yingcai; Lay, Thorne; Flanagan, Megan P; Williams, Quentin

    2007-05-11

    Subduction zones play critical roles in the recycling of oceanic lithosphere and the generation of continental crust. Seismic imaging can reveal structures associated with key dynamic processes occurring in the upper-mantle wedge above the sinking oceanic slab. Three-dimensional images of reflecting interfaces throughout the upper-mantle wedge above the subducting Tonga slab were obtained by migration of teleseismic recordings of underside P- and S-wave reflections. Laterally continuous weak reflectors with tens of kilometers of topography were detected at depths near 90, 125, 200, 250, 300, 330, 390, 410, and 450 kilometers. P- and S-wave impedances decreased at the 330-kilometer and 450-kilometer reflectors, and S-wave impedance decreased near 200 kilometers in the vicinity of the slab and near 390 kilometers, just above the global 410-kilometer increase. The pervasive seismic reflectivity results from phase transitions and compositional zonation associated with extensive metasomatism involving slab-derived fluids rising through the wedge.

  17. Growth of the deposit wedge in the mountain reservoir

    Science.gov (United States)

    Chen, Y.; Song, G.

    2011-12-01

    The sedimentary problem of mountain reservoirs in Taiwan is getting serious year by year.Due to eroded sediments enter downstream reservoirs,the loss of sediment transport capacity may cause deposition of sediment in reservoirs.This phenomenon make problems to small mountain reservoirs.To realize the interaction between deposit wedges and mountain reservoirs,we selected Wushe reservoir which is situated in central Taiwan for a case study. Wushe reservoir is long and narrow.In recent years,most sediment is introduced during rain events that now accompany climate change are very important in sediment supply.In this thesis,we collected data of underwater landform and sub-bottom bedding information by using high resolution Multibeam Survey System(MBS) and seismic-reflection system.Up to now,we already had the bathymetric data for more than ten years,moreover,in 2010,we used 3.5kHz sub-bottom seismic profiler to analysis the sedimentary bedding situation in this area.These methods provide us accurate reservoir topography,sediment accumulation and the major ways of sediment transportation.The study purposes are as follows: First,according to the available underwater data for last ten years,we recognize the geomorphological characters of sedimentation as well as complete the mappings.Comparing to bathymetric images each year,we evaluate the carried ways of sediment.The flow water which enters this area transports along the thalweg,which in eastern reservoir.The range of water level variation cause alteration of sedimentary morphology,it also affects the scope of alluvial fan.The alluvial fan is located in the middle of the reservoir,the edge of it had moved forward 500 meters for last ten years.The annual mean of forward velocity was 50 meters,the elevation of fan edge also accelerated 10 meters per year.In a word,the large volume of the sedimentary delta is in Wushe reservoir now. Second,trying to clarify the composition of sedimentation and explain the sub

  18. Quantitative comparisons of analogue models of brittle wedge dynamics

    Science.gov (United States)

    Schreurs, Guido

    2010-05-01

    Analogue model experiments are widely used to gain insights into the evolution of geological structures. In this study, we present a direct comparison of experimental results of 14 analogue modelling laboratories using prescribed set-ups. A quantitative analysis of the results will document the variability among models and will allow an appraisal of reproducibility and limits of interpretation. This has direct implications for comparisons between structures in analogue models and natural field examples. All laboratories used the same frictional analogue materials (quartz and corundum sand) and prescribed model-building techniques (sieving and levelling). Although each laboratory used its own experimental apparatus, the same type of self-adhesive foil was used to cover the base and all the walls of the experimental apparatus in order to guarantee identical boundary conditions (i.e. identical shear stresses at the base and walls). Three experimental set-ups using only brittle frictional materials were examined. In each of the three set-ups the model was shortened by a vertical wall, which moved with respect to the fixed base and the three remaining sidewalls. The minimum width of the model (dimension parallel to mobile wall) was also prescribed. In the first experimental set-up, a quartz sand wedge with a surface slope of ˜20° was pushed by a mobile wall. All models conformed to the critical taper theory, maintained a stable surface slope and did not show internal deformation. In the next two experimental set-ups, a horizontal sand pack consisting of alternating quartz sand and corundum sand layers was shortened from one side by the mobile wall. In one of the set-ups a thin rigid sheet covered part of the model base and was attached to the mobile wall (i.e. a basal velocity discontinuity distant from the mobile wall). In the other set-up a basal rigid sheet was absent and the basal velocity discontinuity was located at the mobile wall. In both types of experiments

  19. Balloon occlusion versus wedged hepatic venography using iodinated contrast for targeting the portal vein during TIPS.

    Science.gov (United States)

    Caporossi, J-M; Vidal, V; Jacquier, A; Reyre, A; Flavian, A; Muller, C; Gaubert, J-Y; Bartoli, J-M; Moulin, G; Varoquaux, A

    2015-04-01

    To assess the efficacy, safety and gain in procedure time of the technique of balloon occlusion hepatic venography with iodinated contrast used to target the portal vein during TIPS. The technique is assessed versus wedged hepatic venography. Fifty-eight TIPS were prospectively included. The portal vein was located in 30 cases by the wedged hepatic venography (group 1) and in 28 cases by balloon occlusion hepatic venography (group 2). To compare both techniques a "portogram quality" score was defined using a 5 points scale. The time required to achieve portal puncture was also recorded. The complications of both procedures were assessed and classified in groups as intrahepatic hematoma or intraperitoneal hemorrhage. The right portal vein was visualized in a significantly higher number of patients using balloon than with wedged retrograde venography 71.3% (20/28) versus 13.3% (4/30) respectively (P=0.002). The quality score for the portogram was significantly higher for balloon hepatic venography 2.21 than for wedged hepatic venography 1.07 (P=0.002). The mean time required to puncture the portal vein was significantly shorter when the right branch of the portal vein was visualized 21 min versus 33.5 min (P=0.046). We recorded one intrahepatic hematoma (3.3%) and 4 intraperitoneal hemorrhage (13.3%) secondary to wedged hepatic venography. There were no complications with balloon occlusion hepatic venography (P=0.053). The use of balloon occlusion hepatic venography improves the quality of the retrograde portal venography to target the portal vein and decreases procedure time. The balloon technique is also burdened with fewer complications than the standard wedged hepatic venography. Copyright © 2014 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

  20. P-wave anisotropy, mantle wedge flow and olivine fabrics beneath Japan

    Science.gov (United States)

    Liu, Xin; Zhao, Dapeng

    2017-09-01

    We present a new 3-D anisotropic P-wave velocity (Vp) model for the crust and upper mantle of the Japan subduction zone obtained by inverting a large number of high-quality P-wave traveltime data of local earthquakes and teleseismic events. By assuming orthorhombic anisotropy with a vertical symmetry axis existing in the modeling space, isotropic Vp tomography and 3-D Vp azimuthal and radial anisotropies are determined simultaneously. According to a simple flow field and the obtained Vp anisotropic tomography, we estimate the distribution of olivine fabrics in the mantle wedge. Our results show that the forearc mantle wedge above the subducting Pacific slab beneath NE Japan exhibits an azimuthal anisotropy with trench-parallel fast velocity directions (FVDs) and Vhf > Vv > Vhs (here Vv is Vp in the vertical direction, Vhf and Vhs are P-wave velocities in the fast and slow directions in the horizontal plane), where B-type olivine fabric with vertical trench-parallel flow may dominate. Such an anisotropic feature is not obvious in the forearc mantle wedge above the Philippine Sea (PHS) slab under SW Japan, probably due to higher temperatures and more fluids there associated with the young and warm PHS slab subduction. Trench-normal FVDs and Vhf > Vv > Vhs are generally revealed in the mantle wedge beneath the arc and backarc in Japan, where E-type olivine fabric with FVD-parallel horizontal flow may dominate. Beneath western Honshu, however, the mantle wedge exhibits an anisotropy of Vv > Vhf > Vhs and so C-type olivine fabric may dominate, suggesting that the water content is the highest there, because both the PHS and Pacific slabs exist there and their dehydration reactions release abundant fluids to the overlying mantle wedge.

  1. Tectonic and gravity extensional collapses in overpressured cohesive and frictional wedges

    Science.gov (United States)

    Yuan, X. P.; Leroy, Y. M.; Maillot, B.

    2015-03-01

    Two modes of extensional collapse in a cohesive and frictional wedge of arbitrary topography, finite extent, and resting on an inclined weak décollement are examined by analytical means. The first mode consists of the gravitational collapse by the action of a half-graben, rooting on the décollement and pushing seaward the frontal part of the wedge. The second mode results from the tectonics extension at the back wall with a similar half-graben kinematics and the landward sliding of the rear part of the wedge. The predictions of the maximum strength theorem, equivalent to the kinematic approach of limit analysis and based on these two collapse mechanisms, not only match exactly the solutions of the critical Coulomb wedge theory, once properly amended, but generalizes them in several aspects: wedge of finite size, composed of cohesive material and of arbitrary topography. This generalization is advantageous to progress in our understanding of many laboratory experiments and field cases. For example, it is claimed from analytical results validated by experiments that the stability transition for a cohesive, triangular wedge occurs with the activation of the maximum length of the décollement. It is shown that the details of the topography, for the particular example of the Mejillones peninsula (North Chile) is, however, responsible for the selection of a short length-scale, dynamic instability corresponding to a frontal gravitational instability. A reasonable amount of cohesion is sufficient for the pressures proposed in the literature to correspond to a stability transition and not with a dynamically unstable state.

  2. Structural and metamorphic evolution of serpentinites and rodingites recycled in the Alpine subduction wedge

    Science.gov (United States)

    Zanoni, D.; Rebay, G.; Spalla, M. I.

    2015-12-01

    Hydration-dehydration of mantle rocks affects the viscosity of the mantle wedge and plays a prominent role in subduction zone tectonics, facilitating marble cake-type instead of large-slice dynamics. An accurate structural and petrologic investigation of serpentinites from orogenic belts, supported by their long-lived structural memory, can help to recognize pressure-sensitive mineral assemblages for deciphering their P-prograde and -retrograde tectonic trajectories. The European Alps preserve large volumes of the hydrated upper part of the oceanic lithosphere that represents the main water carrier into the Alpine subduction zone. Therefore, it is important to understand what happens during subduction when these rocks reach P-T conditions proximal to those that trigger the break-down of serpentine, formed during oceanic metamorphism, to produce olivine and clinopyroxene. Rodingites associated with serpentinites are usually derived from metasomatic ocean floor processes but rodingitization can also happen in subduction environments. Multiscale structural and petrologic analyses of serpentinites and enclosed rodingites have been combined to define the HP mineral assemblages in the Zermatt-Saas ophiolites. They record 3 syn-metamorphic stages of ductile deformation during the Alpine cycle, following the ocean floor history that is testified by structural and metamorphic relics in both rock types. D1 and D2 developed under HP to UHP conditions and D3 under lower P conditions. Syn-D2 assemblages in serpentinites and rodingites indicate conditions of 2.5 ± 0.3 GPa and 600 ± 20°C. This interdisciplinary approach shows that the dominant structural and metamorphic imprint of the Zermatt-Saas eclogitized serpentinites and rodingites developed during the Alpine subduction and that subduction-related serpentinite de-hydration occurred exclusively at Pmax conditions, during D2 deformation. In contrast, in the favourable rodingite bulk composition (Ca-rich), hydrated minerals

  3. Comparison of infinite and wedge fringe settings in Mach Zehnder interferometer for temperature field measurement

    Energy Technology Data Exchange (ETDEWEB)

    Haridas, Divya [Department of Physics, National Institute of Technology Calicut, Kerala, 673601 (India); P, Vibin Antony; Sajith, V.; Sobhan, C. B. [School of Nano Science and Technology, National Institute of Technology Calicut, Kerala, 673601 (India)

    2014-10-15

    Interferometric method, which utilizes the interference of coherent light beams, is used to determine the temperature distribution in the vicinity of a vertical heater plate. The optical components are arranged so as to obtain wedge fringe and infinite fringe patterns and isotherms obtained in each case were compared. In wedge fringe setting, image processing techniques has been used for obtaining isotherms by digital subtraction of initial parallel fringe pattern from deformed fringe pattern. The experimental results obtained are compared with theoretical correlations. The merits and demerits of the fringe analysis techniques are discussed on the basis of the experimental results.

  4. Wedge filling and interface delocalization in finite Ising lattices with antisymmetric surface fields.

    Science.gov (United States)

    Milchev, Andrey; Müller, M; Binder, K; Landau, D P

    2003-09-01

    Theoretical predictions by Parry et al. for wetting phenomena in a wedge geometry are tested by Monte Carlo simulations. Simple cubic LxLxL(y) Ising lattices with nearest neighbor ferromagnetic exchange and four free LxL(y) surfaces, at which antisymmetric surface fields +/-H(s) act, are studied for a wide range of linear dimensions (4Ising model as a lattice gas, the problem is equivalent to a liquid-gas transition in a pore with quadratic cross section, where two walls favor the liquid and the other two walls favor the gas. For temperatures T below the bulk critical temperature T(c) this boundary condition (where periodic boundary conditions are used in the y direction along the wedges) leads to the formation of two domains with oppositely oriented magnetization and separated by an interface. For L,L(y)--> infinity and T larger than the filling transition temperature T(f)(H(s)), this interface runs from the one wedge where the surface planes with a different sign of the surface field meet (on average) straight to the opposite wedge, so that the average magnetization of the system is zero. For Tinterface is bound either to the wedge where the two surfaces with field -H(s) meet (then the total magnetization m of the system is positive) or to the opposite wedge (then minterface midpoint from the wedges is studied as T-->T(f)(H(s)) from below, as is the corresponding behavior of the magnetization and its moments. We consider the variation of l(0) for T>T(f)(H(s)) as a function of a bulk field and find that the associated exponents agree with theoretical predictions. The correlation length xi(y) in the y direction along the wedges is also studied, and we find no transition for finite L and L(y)--> infinity. For L--> infinity the prediction l(0) proportional, variant (H(sc)-H(s))(-1/4) is verified, where H(sc)(T) is the inverse function of T(f)(H(s)) and xi(y) proportional, variant (H(sc)-H(s))(-3/4), respectively. We also find that m vanishes discontinuously at the

  5. Molecular depth profiling with cluster secondary ion mass spectrometry and wedges.

    Science.gov (United States)

    Mao, Dan; Wucher, Andreas; Winograd, Nicholas

    2010-01-01

    Secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by 40 keV C(60)(+) bombardment of a 395 nm thin film of Irganox 1010 doped with four delta layers of Irganox 3114. The wedge structure creates a laterally magnified cross section of the film. From an examination of the resulting surface, information about depth resolution, topography, and erosion rate can be obtained as a function of crater depth in a single experiment. This protocol provides a straightforward way to determine the parameters necessary to characterize molecular depth profiles and to obtain an accurate depth scale for erosion experiments.

  6. Global Solutions of Shock Reflection by Wedges for the Nonlinear Wave Equation

    Institute of Scientific and Technical Information of China (English)

    Xuemei DENG; Wei XIANG

    2011-01-01

    When a plane shock hits a wedge head on,it experiences a reflection-diffraction process and then a self-similar reflected shock moves outward as the original shock moves forward in time.In this paper,shock reflection by large-angle wedges for compressible flow modeled by the nonlinear wave equation is studied and a global theory of existence,stability and regularity is established.Moreover,C0,1 is the optimal regularity for the solutions across the degenerate sonic boundary.

  7. Laparoscopic wedge resection of synchronous gastric intraepithelial neoplasia and stromal tumor: a case report.

    Science.gov (United States)

    Mou, Yi-Ping; Xu, Xiao-Wu; Xie, Kun; Zhou, Wei; Zhou, Yu-Cheng; Chen, Ke

    2010-10-21

    Synchronous occurrence of epithelial neoplasia and gastrointestinal stromal tumor (GIST) in the stomach is uncommon. Only rare cases have been reported in the literature. We present here a 60-year-old female case of synchronous occurrence of gastric high-level intraepithelial neoplasia and GIST with the features of 22 similar cases and detailed information reported in the English-language literature summarized. In the present patient, epithelial neoplasia and GIST were removed en bloc by laparoscopic wedge resection. To the best of our knowledge, this is the first reported case treated by laparoscopic wedge resection.

  8. RESEARCH ON THE MOTION CHARACTERISTICS OF FIBER SUSPENSIONS IN A WEDGE-SHAPED FLOW

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper the motion of cylindrical particles in a wedge-shaped flow was studied. The velocity distribution of wedge-shaped flow was simulated first, then the Euler-Lagrange model used to calculate the motion of cylindrical particles. The evolution of particle location, velocity and orientation with time was examined. The trajectories of the particles with different particle Stokes number, rate of flow and initial particle orientation were drawn. The results indicate that the Stokes number and initial orientation are important parameters which affect the particle motion. The conclusions are helpful to the engineering applications.

  9. Reconstruction of Bulk Operators within the Entanglement Wedge in Gauge-Gravity Duality

    Science.gov (United States)

    Dong, Xi; Harlow, Daniel; Wall, Aron C.

    2016-07-01

    In this Letter we prove a simple theorem in quantum information theory, which implies that bulk operators in the anti-de Sitter/conformal field theory (AdS/CFT) correspondence can be reconstructed as CFT operators in a spatial subregion A , provided that they lie in its entanglement wedge. This is an improvement on existing reconstruction methods, which have at most succeeded in the smaller causal wedge. The proof is a combination of the recent work of Jafferis, Lewkowycz, Maldacena, and Suh on the quantum relative entropy of a CFT subregion with earlier ideas interpreting the correspondence as a quantum error correcting code.

  10. Bulk Reconstruction in the Entanglement Wedge in AdS/CFT

    CERN Document Server

    Dong, Xi; Wall, Aron C

    2016-01-01

    In this note we prove a simple theorem in quantum information theory, which implies that bulk operators in the Anti-de Sitter / Conformal Field Theory (AdS/CFT) correspondence can be reconstructed as CFT operators in a spatial subregion $A$, provided that they lie in its entanglement wedge. This is an improvement on existing reconstruction methods, which have at most succeeded in the smaller causal wedge. The proof is a combination of the recent work of Jafferis, Lewkowycz, Maldacena, and Suh on the quantum relative entropy of a CFT subregion with earlier ideas interpreting the correspondence as a quantum error correcting code.

  11. Obliquity of the Galilean satellites: The influence of a global internal liquid layer

    CERN Document Server

    Baland, R -M; Van Hoolst, T

    2012-01-01

    The obliquity of the Galilean satellites is small but not yet observed. Studies of cycloidal lineaments and strike-slip fault patterns on Europa suggest that Europa's obliquity is about 1 deg, although theoretical models of the obliquity predict the obliquity to be one order of magnitude smaller for an entirely solid Europa. Here, we investigate the influence of a global liquid layer on the obliquity of the Galilean satellites. Io most likely has a fully liquid core, while Europa, Ganymede, and Callisto are thought to have an internal global liquid water ocean beneath an external ice shell. We use a model for the obliquity based on a Cassini state model extended to the presence of an internal liquid layer and the internal gravitational and pressure torques induced by the presence of this layer. We find that the obliquity of Io only weakly depends on the different internal structure models considered, because of the weak influence of the liquid core which is therefore almost impossible to detect through observ...

  12. The effect of shoe design and lateral wedges on knee load and neuromuscular control in healthy subjects during walking

    DEFF Research Database (Denmark)

    Mølgaard, Carsten; Kersting, Uwe G.

    2014-01-01

    three-dimensional gait analysis. Barefoot walking, walking in a running shoe, an Oxford-type leather shoe, and a rocker shoe were analysed. The shoes were tested both with and without a 10-degree full-length laterally wedged insole. Results: There were significant shoe wedge interactions on the first...

  13. 76 FR 24856 - Heavy Forged Hand Tools (i.e., Axes & Adzes, Bars & Wedges, Hammers & Sledges, and Picks...

    Science.gov (United States)

    2011-05-03

    ..., and Picks & Mattocks) From the People's Republic of China: Final Results of the Expedited Sunset... & Adzes, Bars & Wedges, Hammers & Sledges, and Picks & Mattocks) from the People's Republic of China..., track tools and wedges; (3) picks and mattocks; and (4) axes, adzes and similar hewing tools. Hand...

  14. 76 FR 52313 - Heavy Forged Hand Tools (i.e., Axes & Adzes, Bars & Wedges, Hammers & Sledges, and Picks...

    Science.gov (United States)

    2011-08-22

    ..., and Picks & Mattocks) From the People's Republic of China: Continuation of Antidumping Duty Orders... & Adzes, Bars & Wedges, Hammers & Sledges, and Picks & Mattocks) (``Hand Tools'') from the People's... & Wedges, Hammers & Sledges, and Picks & Mattocks) From the People's Republic of China: Final Results...

  15. Determination of refractive index of a simple negative, positive, or zero power lens using wedged plated interferometer

    Science.gov (United States)

    Shukla, R. P.; Perera, G. M.; George, M. C.; Venkateswarlu, P.

    1990-01-01

    A nondestructive technique for measuring the refractive index of a negative lens using a wedged plate interferometer is described. The method can be also used for measuring the refractive index of convex or zero power lenses. Schematic diagrams are presented for the use of a wedged plate interferometer for measuring the refractive index of a concave lens and of a convex lens.

  16. Semi-infinite $q$-wedge construction of the level 2 Fock Space of $U_q(\\widehat{sl}_2)$

    CERN Document Server

    Petersen, J U H

    1997-01-01

    In this proceedings a particular example from \\cite{KMPY} (q-alg/9603025) is presented: the construction of the level 2 Fock space of $\\U_q(\\affsl{2})$. The generating ideal of the wedge relations is given and the wedge space defined. Normal ordering of wedges is defined in terms of the energy function. Normally ordered wedges form a base of the wedge space. The q-deformed Fock space is defined as the space of semi-infinite wedges with a finite number of vectors in the wedge product differing from a ground state sequence, and endowed with a separated q-adic topology . Normally ordered wedges form a base of the Fock space. The action of $\\U_q(\\affsl{2})$ on the Fock space converges in the q-adic topology. On the Fock space the action of bosons, which commute with the $\\U_q(\\affsl{2})$-action, also converges in the q-adic topology. Hence follows the decomposition of the Fock space into irreducible $\\U_q(\\affsl{2})$-modules.

  17. The effects of various kinds of lateral wedge insoles on performance of individuals with knee joint osteoarthritis

    Directory of Open Access Journals (Sweden)

    Masoud Rafiaee

    2012-01-01

    Conclusion: Using lateral wedge insole is a simple, inexpensive therapy for decreasing pain and improving quality of life; however, most research must be carried out to find the effects of lateral wedge on severity of knee joint OA and aligning TFA.

  18. Commissioning Siemens Virtual Wedges in the Oncentra MasterPlan treatment planning system using Gafchromic EBT film.

    Science.gov (United States)

    Ferretti, A; Simonato, F; Zandonà, R; Reccanello, S; Fabbris, R

    2010-12-01

    Virtual Wedges were introduced in Siemens LINACs to improve the treatment workflow. The aim of the present work is the validation of dose calculation by MasterPlan-Oncentra treatment planning system for virtual wedged beams. The Oncor Siemens accelerator installed in the authors' department produces 6 and 15 MV photon beams. At first, the consistency of VW LINAC production was tested and the EBT film measuring method was verified. This method is based on the scanner uniformity correction and absolute dose calibration as reported in literature. Then, the measured and calculated wedge factors and beam profiles are compared. For 15 degrees, 30 degrees, 45 degrees, and 60 degrees wedge angles, the wedge factors for different field sizes were measured by an ionization chamber and the dose profiles were acquired by Gafchromic EBT film. Both types of measurements were collected in isocentric condition. The comparison between measured and calculated VW factors shows discrepancies that increase with field size and angle. The OTP Enhanced algorithm produces better agreement with measurements than the Classic one, with improvement overall visible for large angles. The agreement between measured and planned beam profiles is within limits reported by the ESTRO Booklet No. 7 in terms of confidence limits. The MasterPlan-Oncentra treatment planning system determines wedge factors and VW profiles within the requested accuracy in the majority of treatment conditions. For big field dimensions and wedge angle, wedge factor accordance was worse, but it may be increased with an improvement of the LINAC dosimetric board calibration.

  19. Accuracy and initial stability of open- and closed-wedge high tibial osteotomy: a cadaveric RSA study.

    NARCIS (Netherlands)

    Gaasbeek, R.D.A.; Welsing, R.T.C.; Verdonschot, N.J.J.; Rijnberg, W.J.; Loon, C.J.M. van; Kampen, A. van

    2005-01-01

    We analyzed the difference in angle-correction accuracy and initial stability between open-wedge (OWO) and closed-wedge tibial valgus osteotomy (CWO). Five fresh-frozen pairs of human cadaver lower limbs were used; their bone mineral density (BMD) was measured with DEXA and a planned 7 degrees valgu

  20. Compensation of corneal oblique astigmatism by internal optics: a theoretical analysis.

    Science.gov (United States)

    Liu, Tao; Thibos, Larry N

    2017-05-01

    Oblique astigmatism is a prominent optical aberration of peripheral vision caused by oblique incidence of rays striking the refracting surfaces of the cornea and crystalline lens. We inquired whether oblique astigmatism from these two sources should be expected, theoretically, to have the same or opposite signs across the visual field at various states of accommodation. Oblique astigmatism was computed across the central visual field for a rotationally-symmetric schematic-eye using optical design software. Accommodative state was varied by altering the apical radius of curvature and separation of the biconvex lens's two aspheric surfaces in a manner consistent with published biometry. Oblique astigmatism was evaluated separately for the whole eye, the cornea, and the isolated lens over a wide range of surface curvatures and asphericity values associated with the accommodating lens. We also computed internal oblique astigmatism by subtracting corneal oblique astigmatism from whole-eye oblique astigmatism. A visual field map of oblique astigmatism for the cornea in the Navarro model follows the classic, textbook description of radially-oriented axes everywhere in the field. Despite large changes in surface properties during accommodation, intrinsic astigmatism of the isolated human lens for collimated light is also radially oriented and nearly independent of accommodation both in theory and in real eyes. However, the magnitude of ocular oblique astigmatism is smaller than that of the cornea alone, indicating partial compensation by the internal optics. This implies internal oblique astigmatism (which includes wavefront propagation from the posterior surface of the cornea to the anterior surface of the lens and intrinsic lens astigmatism) must have tangentially-oriented axes. This non-classical pattern of tangential axes for internal astigmatism was traced to the influence of corneal power on the angles of incidence of rays striking the internal lens. Partial

  1. Shoulder magnetic resonance arthrography in the sagittal oblique plane: pictorial essay

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, G.; Forster, B.; Cheong, Y.; Sidhu, G. [Univ. of British Columbia, Dept. of Radiology, Vancouver, British Columbia (Canada); Hawkins, R.; Leith, J. [Univ. of British Columbia, Dept. of Orthopedics, Vancouver, British Columbia (Canada)

    2003-06-01

    Shoulder magnetic resonance (MR) arthrography is the imaging study of choice for investigating glenohumeral instability. The axial and coronal oblique planes have traditionally been used because it is on these planes that the glenoid labrum, as well as the biceps anchor and rotator cuff, are thought to be best evaluated. The purpose of this illustrative review is to demonstrate the diagnostic utility of the sagittal oblique plane in shoulder MR arthrography. Images identifying the normal and abnormal appearance of the labral, ligamentous, myotendinous and osteocartilaginous structures are presented, and comparisons to the axial and coronal oblique planes are made. (author)

  2. Experimental study on mean overtopping of sloping seawall under oblique irregular waves

    Science.gov (United States)

    Wang, Deng-ting; Ju, Lie-hong; Zhu, Jia-ling; Wang, Zhen; Sun, Tian-ting; Chen, Wei-qiu

    2017-06-01

    In this paper, domestic and abroad research progresses and related calculation formulae of the mean overtopping discharge are summarized. Through integral physical model experiments, the relation between the wave direction and the overtopping discharge on the top of the sloping dike is focused on and put into analysis and discussion; and a modified formula for mean overtopping discharges under oblique irregular waves is proposed. The study shows that the mean overtopping discharge generally goes down as the relative wave obliquity β increases for a fixed measurement point and the mean overtopping discharge generally increases as the wave steepness H/L decreases (the cycle increases) for a fixed relative wave obliquity.

  3. Large artificial anisotropic growth rate in on-lattice simulation of obliquely deposited nanostructures

    Science.gov (United States)

    Tanto, B.; Doiron, C. F.; Lu, T.-M.

    2011-01-01

    On-lattice particle simulation is one of the most common types of Monte Carlo simulations used in studying the dynamics of film growth. We report the observation of a large artificial anisotropic growth rate variation owing to the fixed arrangement of particles in an on-lattice simulation of oblique angle deposition. This unexpectedly large anisotropy is not reported in previous literatures and substantially affects the simulation outcomes such as column angle and porosity, two of the most essential quantities in obliquely deposited nanostructures. The result of our finding is of interest to all on-lattice simulations in obliquely deposited films or nanostructures.

  4. Low to high oblique ramus piezoosteotomy: a pilot study.

    Science.gov (United States)

    Landes, Constantin; Tran, Andreas; Ballon, Alexander; Santo, Gregor; Schübel, Florian; Sader, Robert

    2014-09-01

    Two major drawbacks of classical bilateral sagittal split osteotomy (BSSO) are occasional inferior alveolar nerve damage and bad splits. In order to avoid these two well-known disadvantages and benefit from ultrasonic bone cutting, a low-to-high oblique piezoosteotomy (LHO) was developed from Schlössmann's 1922 high oblique osteotomy, clinically evaluated with a standard and a novel osteosynthesis system. Eighty-five patients were retrospectively evaluated, 23 with an LHO osteotomy with standard osteosynthesis, 33 LHO with a dedicated plate osteosynthesis and compared to 29 patients with BSSO and standard osteosyntheses. The mean mandibular advancement in the LHO standard osteosynthesis/LHO dedicated plate osteosynthesis/BSSO collectives was 4.7 ± 2.5/7.8 ± 7.1/4.1 ± 2.8 mm, the mean one year relapse 2.6 ± 0.8 (p = 0.58)/1.4 ± 1.4 (p = 0.28)/2.1 ± 1.4 mm; the mean mandibular setback was 6.9 ± 3.6/7.7 ± 4.1/8.1 ± 4.9 mm and the one year relapse 2.9 ± 2.9 (p = 0.16)/1.4 ± 1.0 (p = 0.38)/1.5 ± 1.9 mm; clockwise rotation of the mandible was 5.2 ± 3.2/6.3 ± 5.1/10.2 ± 6.9°, the one year relapse 2.7 ± 1.2 (p = 0.18)/2.1 ± 1.7 (p = 0.09)/11.4 ± 9.3°; counterclockwise rotation averaged 6.4 ± 3.2/6.5 ± 7.9/6.5 ± 6.1° with a mean one year relapse of 3.3 ± 0.6 (p = 0.37)/3.7 ± 1.9 (p = 0.21)/4.5 ± 6.2°. LHO had 3%, BSSO 5% three months postoperative inferior alveolar nerve deficit (p = 0.17). The operation time was significantly shorter when LHO and dedicated plates were used compared to BSSO. Two broken conventional plates occurred in LHO, which stimulated the development of the dedicated plates used, one in BSSO; four bad splits in BSSO and two in LHO. Reosteosyntheses were performed using the newly developed dedicated "orthognathics" plate. LHO was successfully performed, easier and faster than BSSO. Gonial angle modifications were possible due to the oblique cut

  5. Forearc kinematics in obliquely convergent margins: Examples from Nicaragua and the northern Lesser Antilles

    Science.gov (United States)

    Turner, Henry L., III

    sites and to qualitatively examine the observed post-seismic motion. Coseismic and post-seismic motion in this portion of the forearc indicate that long-term motion of the forearc across the earthquake cycle may proceed in a zig-zag pattern, which may contribute to east-west extension as observed in the Managua graben. Sites to the northwest and southeast were not substantially effected by the earthquake, and longer duration time-series (˜7 yrs) from these areas support the earlier estimates of forearc sliver motion. Results from our analysis of Nicaraguan GPS time-series from 2004--2008 and our earthquake modeling efforts are discussed in Chapter 4 and will form the basis of an article to be submitted for publication. In the northern Lesser Antilles, plate convergence is slow at ˜2 cm yr1, and obliquity varies substantially along the convex Lesser Antilles Subduction Zone. In chapter 5, I present GPS velocities derived from a decade of observations on sites in the northern Lesser Antilles and Virgin Islands. The velocities support forearc sliver motion on the order of ˜2--3 mm yr1 consistent with the lower value estimated by Lopez et al. (2006), indicating convergence in the northern region is only partially partitioned. GPS velocities in the northern Lesser Antilles show considerable variation between islands, suggesting possible independent block motion and internal deformation within the forearc region, however, velocity uncertainties for some sites remain high and may reflect the low signal-to-noise ratio of our residual velocities for the region. The lack of a substantial arc-normal component of shortening is similar to that seen in Nicaragua and may indicate a small amount of locking along the subduction interface with forearc sliver motion being driven from a more fully locked region south of Guadeloupe where the Barracuda and Tiburon aseismic ridges impinge on the subduction zone. (Abstract shortened by UMI.)

  6. Long range hybrid tube-wedge plasmonic waveguide with extreme light confinement and good fabrication error tolerance.

    Science.gov (United States)

    Ding, Li; Qin, Jin; Xu, Kai; Wang, Liang

    2016-02-22

    We studied a novel long range hybrid tube-wedge plasmonic (LRHTWP) waveguide consisting of a high index dielectric nanotube placed above a triangular metal wedge substrate. Using comprehensive numerical simulations on guiding properties of the designed waveguide, it is found that extreme light confinement and low propagation loss are obtained due to strong coupling between dielectric nanotube mode and wedge plasmon polariton. Comparing with previous studied hybrid plasmonic waveguides, the LRHTWP waveguide has longer propagation length and tighter mode confinement. In addition, the LRHTWP waveguide is quite tolerant to practical fabrication errors such as variation of the wedge tip angle and the horizontal misalignment between the nanotube and the metal wedge. The proposed LRHTWP waveguide could have many application potentials for various high performance nanophotonic components.

  7. The distribution and depth of ion doses implanted into wedges by plasma immersion ion implantation in drifting and stationary plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Tarrant, R N; Devasahayam, S; McKenzie, D R; Bilek, M M M [School of Physics (A28), University of Sydney, NSW 2006 (Australia)

    2006-08-15

    The distribution of ion dose arising from plasma immersion ion implantation (PIII) of a complex shape in the form of a wedge is measured. Two types of plasma are considered: a drifting titanium plasma derived from a pulsed cathodic arc and a stationary plasma generated by PIII pulses in oxygen or nitrogen gas. The distributions of the implanted material over the surface of the aluminium wedge were studied using secondary ion mass spectroscopy and Rutherford backscattering. The effects of varying the apex angles of the wedge and the plasma density are investigated. We conclude that ion-focusing effects at the apex of the wedge were more important for the drifting plasma than for the stationary plasmas. In a drifting plasma, the ion drift velocity directed towards the apex of the wedge compresses the sheath close to the apex and enhances the concentration of the dose. For the stationary plasma, the dose is more uniform.

  8. Effects of two different degrees of lateral-wedge insoles on unilateral lower extremity load-bearing line in patients with medial knee osteoarthritis

    Directory of Open Access Journals (Sweden)

    Bilge Yılmaz

    2016-08-01

    Conclusion: Both wedge insoles was effective in moving of the unilateral lower extremity load carrying line to the lateral. Lateral wedged insoles are biomechanically effective and reduce loading of the medial compartment in patients with medial knee osteoarthritis.

  9. Analysis on electromagnetic scattering by a wedge with impedance faces under exact impedance boundary

    Institute of Scientific and Technical Information of China (English)

    吴良超; 汪茂光

    1995-01-01

    Under the exact impedance boundary condition (EIBC), by using wave equations and the longitudinal field method, the electromagnetic scattenng by an impedance wedge has been analysed in detail, following the Maliuzhinets approach, and the uniform diffraction coefficient of the diffracted field has been presented.

  10. Estimation of treatment efficacy with complier average causal effects (CACE) in a randomized stepped wedge trial.

    Science.gov (United States)

    Gruber, Joshua S; Arnold, Benjamin F; Reygadas, Fermin; Hubbard, Alan E; Colford, John M

    2014-05-01

    Complier average causal effects (CACE) estimate the impact of an intervention among treatment compliers in randomized trials. Methods used to estimate CACE have been outlined for parallel-arm trials (e.g., using an instrumental variables (IV) estimator) but not for other randomized study designs. Here, we propose a method for estimating CACE in randomized stepped wedge trials, where experimental units cross over from control conditions to intervention conditions in a randomized sequence. We illustrate the approach with a cluster-randomized drinking water trial conducted in rural Mexico from 2009 to 2011. Additionally, we evaluated the plausibility of assumptions required to estimate CACE using the IV approach, which are testable in stepped wedge trials but not in parallel-arm trials. We observed small increases in the magnitude of CACE risk differences compared with intention-to-treat estimates for drinking water contamination (risk difference (RD) = -22% (95% confidence interval (CI): -33, -11) vs. RD = -19% (95% CI: -26, -12)) and diarrhea (RD = -0.8% (95% CI: -2.1, 0.4) vs. RD = -0.1% (95% CI: -1.1, 0.9)). Assumptions required for IV analysis were probably violated. Stepped wedge trials allow investigators to estimate CACE with an approach that avoids the stronger assumptions required for CACE estimation in parallel-arm trials. Inclusion of CACE estimates in stepped wedge trials with imperfect compliance could enhance reporting and interpretation of the results of such trials.

  11. Nanoscale guiding for cold atoms based on surface plasmons along the tips of metallic wedges

    Institute of Scientific and Technical Information of China (English)

    Wang Zheng-Ling; Tang Wei-Min; Zhou Ming; Gao Chuan-Yu

    2013-01-01

    We propose a novel scheme to guide neutral cold atoms in a nanoscale region based on surface plasmons (SPs) of one pair and two pairs of tips of metallic wedges with locally enhanced light intensity and sub-optical wavelength resolution.We analyze the near-field intensity distribution of the tip of the metallic wedge by the FDTD method,and study the total intensity as well as the total potential of optical potentials and van der Waals potentials for 87Rb atoms in the light field of one pair and two pairs of tips of metallic wedges.It shows that the total potentials of one pair and two pairs of tips of metallic wedges can generate a gravito-optical trap and a dark closed trap for nanoscale guiding of neutral cold atoms.Guided atoms can be cooled with efficient intensity-gradient Sisyphus cooling by blue-detuned light field.This provides an important step towards the generation of hybrid systems consisting of isolated atoms and solid devices.

  12. Numerical Simulation and Experimental Validation of an Integrated Sleeve-Wedge Anchorage for CFRP Rods

    DEFF Research Database (Denmark)

    Schmidt, Jacob Wittrup; Smith, Scott T.; Täljsten, Björn

    2011-01-01

    The tensioning of carbon fibre-reinforced polymer (CFRP) rods for prestressed concrete applications or post-tensioning repair and strengthening has met with mixed success. This is primarily due to limitations inherent in the use of traditional wedge anchors typically used for steel tendons. Recen...

  13. Impingement of water droplets on wedges and diamond airfoils at supersonic speeds

    Science.gov (United States)

    Serafini, John S

    1953-01-01

    An analytical solution has been obtained for the equations of motion of water droplets impinging on a wedge in a two-dimensional supersonic flow field with a shock wave attached to the wedge. The closed-form solution yields analytical expressions for the equation of the droplet trajectory, the local rate of impingement and the impingement velocity at any point on the wedge surface, and the total rate of impingement. The analytical expressions are utilized to determine the impingement on the forward surfaces of diamond airfoils in supersonic flow fields with attached shock waves. The results presented include the following conditions: droplet diameters from 2 to 100 microns, pressure altitudes from sea level to 30,000 feet, free-stream static temperatures from 420 degrees to 460 degrees R. Also, free-stream Mach numbers from 1.1 to 2.0, semi-apex angles for the wedge from 1.14 degrees to 7.97 degrees, thickness-to-chord ratios for the diamond airfoil from 0.02 to 0.14, chord lengths from 1 to 20 feet, and angles of attack from zero to the inverse tangent of the airfoil thickness-to-chord ratio.

  14. Optical necklaces generated by the diffraction on a stack of dielectric wedges

    Energy Technology Data Exchange (ETDEWEB)

    Izdebskaya, Yana [Nonlinear Physics Centre, Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200 (Australia); Department of Physics, V.I. Vernandsky Taurida National University, Simferopol 95007, Crimea (Ukraine)], E-mail: yvi124@rsphysse.anu.edu.au

    2008-05-19

    We demonstrate that the regular ring-shaped arrays of Gaussian beams, or optical necklaces, can be generated using diffraction on a stack of dielectric wedges. A condition for self-similarity and structural stability of the beams has been derived and shows good comparison with experimental data.

  15. On the role of lateral waves in the radiation from the dielectric wedge

    DEFF Research Database (Denmark)

    Balling, Peter

    1973-01-01

    The field on the dielectric wedge is approximated by a plane-wave expansion as in [1]. Contributions from this solution to both the surface field and the radiation field are examined. Finally, an experimental radiation field is compared with the plane-wave solution and with a geometric-optical di...

  16. On the shape of a droplet in a wedge: new insight from electrowetting

    NARCIS (Netherlands)

    Baratian, D.; Cavalli, A.; Ende, van den H.T.M.; Mugele, F.

    2015-01-01

    The equilibrium morphology of liquid drops exposed to geometric constraints can be rather complex. Even for simple geometries, analytical solutions are scarce. Here, we investigate the equilibrium shape and position of liquid drops confined in the wedge between two solid surfaces at an angle α. Usin

  17. Quantitative planar Raman imaging through a spectrograph: visualisation of a supersonic wedge flow

    NARCIS (Netherlands)

    Tolboom, R.A.L.; Dam, N.J.; Meulen, J.J. ter; Bakker, P.G.

    2005-01-01

    Planar Raman imaging through a spectrograph is demonstrated as a diagnostic tool for quantitative flow visualisation of internal supersonic wedge flow. A dedicated Bayesian deconvolution filter is used to remove the spectral structure that is introduced by the spectrograph. The 2D density field is d

  18. Fossil predation: did some clavilithine fasciolariid gastropods employ valve-wedging to feed on bivalves?

    NARCIS (Netherlands)

    Vermeij, Geerat J.

    2015-01-01

    Several gastropods, including members of the Busyconinae, wedge or chip bivalve prey by inserting the outer lip between the valves. This habit, which is associated with an abapically downwardly convex outer lip, often results in breakage and subsequent repair of the lip. I tested the hypothesis that

  19. Thick-Walled Cylinder Theory Applied on a Conical Wedge Anchorage

    DEFF Research Database (Denmark)

    Bennitz, Anders; Grip, Niklas; Schmidt, Jacob Wittrup

    2011-01-01

    Conical wedge anchorages are frequently used to anchor steel tendons in prestressing applications within the construction industry. To replace the steel tendons with non-corrosive and low weight FRPs (Fiber Reinforced Polymers), the different mechanical interactions between the steel and FRPs call...

  20. Dissolved organic carbon loss from Yedoma permafrost amplified by ice wedge thaw

    NARCIS (Netherlands)

    Vonk, J. E.; Mann, P. J.; Dowdy, K. L.; Davydova, A.; Davydov, S. P.; Zimov, N.; Spencer, R. G. M.; Bulygina, E. B.; Eglinton, T. I.; Holmes, R. M.

    2013-01-01

    Pleistocene Yedoma permafrost contains nearly a third of all organic matter (OM) stored in circum-arctic permafrost and is characterized by the presence of massive ice wedges. Due to its rapid formation by sediment accumulation and subsequent frozen storage, Yedoma OM is relatively well preserved an