Report 2000 RTE, year 1; Rapport 2000 RTE, An 1

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This document presents the first annual report of the Group RTE, as an independent society of Electric Power Transport. Since its separation with the Group EDF in july 2000, the society organized its management. This report presents this organization and the first results of the group. The first part presents the new staff and the actions after the storm of 1999. The second part presents the missions of RTE and the juridical frame. The part three is devoted to the customer relations. The parts four and five detail the management and the objectives of the Group. (A.L.B.)

Towards the financial and accountable independence of RTE; Vers l'independance comptable et financiere de RTE

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The principles of financial and accountable independence of RTE have been defined by the law of the 10. february 2000. It has been done in order to allow RTE to assure its mission: free electric power transportation in France and Europe respecting the competition rules, guarantee of the electric power system safety and the equilibrium between supply and demand. The financial management of RTE is analyzed. (A.L.B.)

Diagnostic potential of real-time elastography (RTE) and shear wave elastography (SWE) to differentiate benign and malignant thyroid nodules

Science.gov (United States)

Hu, Xiangdong; Liu, Yujiang; Qian, Linxue

2017-01-01

Abstract Background: Real-time elastography (RTE) and shear wave elastography (SWE) are noninvasive and easily available imaging techniques that measure the tissue strain, and it has been reported that the sensitivity and the specificity of elastography were better in differentiating between benign and malignant thyroid nodules than conventional technologies. Methods: Relevant articles were searched in multiple databases; the comparison of elasticity index (EI) was conducted with the Review Manager 5.0. Forest plots of the sensitivity and specificity and SROC curve of RTE and SWE were performed with STATA 10.0 software. In addition, sensitivity analysis and bias analysis of the studies were conducted to examine the quality of articles; and to estimate possible publication bias, funnel plot was used and the Egger test was conducted. Results: Finally 22 articles which eventually satisfied the inclusion criteria were included in this study. After eliminating the inefficient, benign and malignant nodules were 2106 and 613, respectively. The meta-analysis suggested that the difference of EI between benign and malignant nodules was statistically significant (SMD = 2.11, 95% CI [1.67, 2.55], P benign and malignant thyroid nodules. PMID:29068996

RTE - Memo 2016

International Nuclear Information System (INIS)

2016-01-01

This report proposes tables, figures and maps of data which illustrate RTE activities in 2015 (turnover, income employees), its profile (lengths of overhead, underground and refurbished lines, number of substations), the flow of electricity (injected energy, delivered energy), electricity generation (installed power and generated energy for different sources, evolution of wind and photovoltaic generation), electricity consumption and exchange (evolution of consumption and of export balance), the electricity market (contractual cross-border exchanges, 2015 results of the balancing mechanism, breakdown of the adjustment mechanism), the European situation (high interconnection, daily prices on the electricity markets), major achievements and projects on the French territory, and financial results for the RTE group (income statement, financial indicators, simplified balance sheet, history of investments). A chart describes the group's organisation, and members of the different boards (management board, executive committee, supervisory board) are indicated

RTE - Reliability report 2016

International Nuclear Information System (INIS)

2017-06-01

Every year, RTE produces a reliability report for the past year. This document lays out the main factors that affected the electrical power system's operational reliability in 2016 and the initiatives currently under way intended to ensure its reliability in the future. Within a context of the energy transition, changes to the European interconnected network mean that RTE has to adapt on an on-going basis. These changes include the increase in the share of renewables injecting an intermittent power supply into networks, resulting in a need for flexibility, and a diversification in the numbers of stakeholders operating in the energy sector and changes in the ways in which they behave. These changes are dramatically changing the structure of the power system of tomorrow and the way in which it will operate - particularly the way in which voltage and frequency are controlled, as well as the distribution of flows, the power system's stability, the level of reserves needed to ensure supply-demand balance, network studies, assets' operating and control rules, the tools used and the expertise of operators. The results obtained in 2016 are evidence of a globally satisfactory level of reliability for RTE's operations in somewhat demanding circumstances: more complex supply-demand balance management, cross-border schedules at interconnections indicating operation that is closer to its limits and - most noteworthy - having to manage a cold spell just as several nuclear power plants had been shut down. In a drive to keep pace with the changes expected to occur in these circumstances, RTE implemented numerous initiatives to ensure high levels of reliability: - maintaining investment levels of euro 1.5 billion per year; - increasing cross-zonal capacity at borders with our neighbouring countries, thus bolstering the security of our electricity supply; - implementing new mechanisms (demand response, capacity mechanism, interruptibility, etc.); - involvement in tests or projects

Presentation of RTE results 2003; Bilan electrique francais 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In 2003, RTE recorded a clear improvement in its financial results, and continued its debt reduction programme. The financial year 2003 was marked by a clear improvement in RTE's financial performance: results exceeded objectives, with turnover growing strongly, net income reached levels almost three times higher than those recorded in 2002, the economic rate of return rose to 7.1%, and debt was reduced by 470 Meuros. These results are explained by the substantial improvement in productivity, which has risen by 5% per year on average over the last three years. Net income has almost tripled due to RTE's improved productivity completed by a significant rise in its turnover and stabilizing operating costs RTE's finances therefore remain healthy, enabling the company to continue its debt reduction programme. Satisfactory economic and financial rates of return. Deadlines facing RTE in 2004: in application of the second European Directive, adopted on 26 June 2003, RTE faces two major deadlines in 2004: - the implementation of the 2. phase in the process of opening up the French electricity market, - its legal independence. On 1 July 2004, the market will be opened up to competition for all professional customers. At that date RTE, like all other electricity transmission system operators (TSOs) in the European Union, should be a legally independent body. The new central role of TSOs in Europe: how are electricity transmission system operators in other EU countries organised?.

Diagnostic potential of real-time elastography (RTE) and shear wave elastography (SWE) to differentiate benign and malignant thyroid nodules: A systematic review and meta-analysis.

Science.gov (United States)

Hu, Xiangdong; Liu, Yujiang; Qian, Linxue

2017-10-01

Real-time elastography (RTE) and shear wave elastography (SWE) are noninvasive and easily available imaging techniques that measure the tissue strain, and it has been reported that the sensitivity and the specificity of elastography were better in differentiating between benign and malignant thyroid nodules than conventional technologies. Relevant articles were searched in multiple databases; the comparison of elasticity index (EI) was conducted with the Review Manager 5.0. Forest plots of the sensitivity and specificity and SROC curve of RTE and SWE were performed with STATA 10.0 software. In addition, sensitivity analysis and bias analysis of the studies were conducted to examine the quality of articles; and to estimate possible publication bias, funnel plot was used and the Egger test was conducted. Finally 22 articles which eventually satisfied the inclusion criteria were included in this study. After eliminating the inefficient, benign and malignant nodules were 2106 and 613, respectively. The meta-analysis suggested that the difference of EI between benign and malignant nodules was statistically significant (SMD = 2.11, 95% CI [1.67, 2.55], P benign and malignant thyroid nodules.

RTE - 2015 Reliability Report. Summary

International Nuclear Information System (INIS)

2016-01-01

Every year, RTE produces a reliability report for the past year. This report includes a number of results from previous years so that year-to-year comparisons can be drawn and long-term trends analysed. The 2015 report underlines the major factors that have impacted on the reliability of the electrical power system, without focusing exclusively on Significant System Events (ESS). It describes various factors which contribute to present and future reliability and the numerous actions implemented by RTE to ensure reliability today and in the future, as well as the ways in which the various parties involved in the electrical power system interact across the whole European interconnected network

Bacteria associated with contamination of ready-to-eat (RTE ...

African Journals Online (AJOL)

The bacteria associated with contamination of ready-to-eat (RTE) cooked rice in Lagos, Nigeria were studied using standard microbiological methods. The objective of this study was to investigate the distribution of pathogenic bacteria recovered from RTE cooked rice in Lagos, assess bacteria load in the contaminated RTE ...

French electric power balance sheet and RTE's technical results for 2004

International Nuclear Information System (INIS)

Derdevet, Michel; Lartigau, Thierry; Coutier, Isabelle

2005-01-01

The mission of RTE, the French electricity Transportation grid, a public service assignment, is to balance the electricity supply and demand in real time. This report presents RTE's preliminary technical results for the year 2004: key figures of the electricity balance sheet, market development, infrastructures performance and evolution, environmental aspects. A second part is devoted to a presentation of the actors of the electricity market, while a third part presents the results of the 2004 RTE's clients survey

RTE - Activity and sustainable development report 2012 - In line with the future

International Nuclear Information System (INIS)

2013-01-01

RTE, an independent subsidiary of EDF, is the French electricity transmission system operator. It is a public service company responsible for operating, maintaining and developing the high and extra high voltage network. It guarantees the reliability and proper operation of the power network. RTE transports electricity between electricity suppliers (French and European) and consumers, whether they are electricity distributors or industrial consumers directly connected to the transmission system. The mission of RTE is to balance the electricity supply and demand in real time. This publication gathers in a single document the 2012 Activity and Sustainable development report of RTE, the Management report with the consolidated financial statements, and the Report from the chairman of the supervisory board

Presentation of RTE results 2003; Presentation des resultats 2003 de RTE

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

For RTE, the financial year 2003 was marked by a number of achievements: our financial performances registered a clear improvement, above objectives, with turnover growing strongly; net income reached levels almost three times higher than those recorded in 2002; the economic rate of return rose to 7.1%; and debt was reduced by 470 Meuros. These results are explained by the substantial improvement in productivity, which has risen by 5% per year on average over the last three years.

RTE: the integration of wind energy in the power system

International Nuclear Information System (INIS)

Glachant, Magali; Neau, Emmanuel

2011-03-01

The total installed capacity of wind power in France grew from a few hundred MW at the beginning of 2005 to 5500 MW at the end of 2010. This fast growth is set to continue, and the French Government's decision of 15 December 2009 on the country's long-term investment programs in power generation requires France to have at least 25 GW of installed wind capacity (including 6 GW offshore) by 2020. But the French specificities are that wind farms are largely spread over the territory, and 95 % of them have an output power below 12 MW which means they are mainly connected to the distribution network. As a consequence, this new intermittent and decentralized production is not 'naturally' observable by RTE, whereas it has nevertheless impacts on the operation of the transmission system for which RTE is responsible. The natural variability of wind power and the difficulty of its predictability require indeed a change in the traditional way of ensuring balancing between production and demand, of managing day-ahead margins and of controlling the electrical flows. Furthermore RTE operators have to be informed quickly and reliably of the real time output power of wind farms and of its evolvement some hours or days ahead to ensure the reliability of the French electrical power system. In this context, new tools were necessary to RTE to acquire as soon as possible data concerning wind power. In two years long, RTE set up an observatory of wind production called the 'IPES system'. 'IPES' enables to get information about technical characteristics of the whole wind farms in France and to observe the wind generation by two ways: in real time with tele-metered data and in the short term with a forecast model integrated into the system. In addition, RTE currently carries out studies about the behavior and the forecasting of wind production integrated into the grids, as internal activities (about forecast methods), and in different projects (such as European projects: Safewind for

RTE - Annual Electricity Report 2015

International Nuclear Information System (INIS)

2016-01-01

As required by the energy transition law for green growth, RTE has prepared and published this Annual Electricity Report to provide a general overview of developments affecting the power system over the previous year. The 2015 edition of the Electricity Report shows that the effects of the energy transition are becoming visible in France: After holding at the same level for three years, power demand rose slightly in a more buoyant economic climate. Adjusted for weather impacts, power consumption in mainland France, excluding the energy sector, increased by 0.5% to 476.3 TWh. Growth was stronger in some industrial sectors, like car manufacturing and metallurgy, while others saw declines. Together with improved energy efficiency, this growth was reflected in consumption by households and SMEs. The weather in France was warm on the whole in 2015, though not as mild as in 2014. Gross consumption in mainland France thus rose 2.2% year-on-year. n Renewable generation capacity continued to grow: the country is now home to more than 10 GW of wind capacity and 6 GW of solar capacity. Wind power covered about 4.5% of domestic demand and solar power 1.6%. Taken together with hydropower, which made a moderate contribution over the year, renewable energy sources covered 18.7% of power demand. The six remaining 250 MW coal-fired plants were taken out of service during the year. All in all, nearly 4 GW of coal-fired generation capacity was decommissioned in France between 2013 and 2015. Thanks to the new method for optimising cross-border exchange capacity (flow-based coupling) and the strengthening of the interconnection between France and Spain, France's exchange balance with neighbouring countries reached 61.7 TWh. This is the third time it has risen above 60 TWh in the past ten years. New demand-side flexibility options continue to be developed. Thanks to tenders on the Balancing Mechanism, RTE had up to 1,900 MW of load shedding capacity ready for activation in 2015, up

Characterization of antibiotic resistance in Salmonella enterica isolates determined from ready-to-eat (RTE) salad vegetables.

Science.gov (United States)

Taban, Birce Mercanoglu; Aytac, Sait Aykut; Akkoc, Nefise; Akcelik, Mustafa

2013-01-01

In the last decade, ready-to-eat (RTE) salad vegetables are gaining increasing importance in human diet. However, since they are consumed fresh, inadequate washing during processing can bring on some foodborne illnesses, like salmonellosis, since these food items have natural contamination from soil and water. During 2009-2010, a total of 81 samples were purchased arbitrarily from local markets in Ankara, and were examined for Salmonella contamination. Salmonella screening was performed by using anti-Salmonella magnetic beads system and polymerase chain reaction (PCR) identification of the suspected colonies. Then, the antibiotic resistance profiles of four Salmonella strains identified (strains RTE-1, RTE-2, RTE-3, and RTE-4) were also investigated, since the mechanism by which Salmonella spp. have accumulated antibiotic resistance genes is of interest. All strains showed resistance against sulfonamides (MIC > 128 mg/L). Further results suggested that associated sulfonamide resistance genes were encoded by the 55.0 kb plasmid of strain RTE-1 that involves no integrons. As a result of using two primers (P1254 and P1283) in randomly amplified polymorphic DNA-PCR (RAPD-PCR) analysis, two common amplicons (364 bp and 1065 bp) were determined. The findings of this study provide support to the adoption of guidelines for the prudent use of antibiotics in order to reduce the number of pathogens present on vegetable and fruit farms. Besides, since it is shown that these bacteria started to gain resistance to antibiotics, it is necessary to further investigate the prevalence of them in foods.

Characterization of antibiotic resistance in Salmonella enterica isolates determined from ready-to-eat (RTE salad vegetables

Directory of Open Access Journals (Sweden)

Birce Mercanoglu Taban

2013-01-01

Full Text Available In the last decade, ready-to-eat (RTE salad vegetables are gaining increasing importance in human diet. However, since they are consumed fresh, inadequate washing during processing can bring on some foodborne illnesses, like salmonellosis, since these food items have natural contamination from soil and water. During 2009-2010, a total of 81 samples were purchased arbitrarily from local markets in Ankara, and were examined for Salmonella contamination. Salmonella screening was performed by using anti-Salmonella magnetic beads system and polymerase chain reaction (PCR identification of the suspected colonies. Then, the antibiotic resistance profiles of four Salmonella strains identified (strains RTE-1, RTE-2, RTE-3, and RTE-4 were also investigated, since the mechanism by which Salmonella spp. have accumulated antibiotic resistance genes is of interest. All strains showed resistance against sulfonamides (MIC > 128 mg/L. Further results suggested that associated sulfonamide resistance genes were encoded by the 55.0 kb plasmid of strain RTE-1 that involves no integrons. As a result of using two primers (P1254 and P1283 in randomly amplified polymorphic DNA-PCR (RAPD-PCR analysis, two common amplicons (364 bp and 1065 bp were determined. The findings of this study provide support to the adoption of guidelines for the prudent use of antibiotics in order to reduce the number of pathogens present on vegetable and fruit farms. Besides, since it is shown that these bacteria started to gain resistance to antibiotics, it is necessary to further investigate the prevalence of them in foods.

RTE - Electricity transport network operator. Energy is our future: let's save it

International Nuclear Information System (INIS)

2014-01-01

Managing and developing the French electricity transport network is essential to provide quality electricity on a continuous basis to all consumers. Since it was founded in 2000, and since it was made into a public service company (2005), RTE has proven its ability to fulfil its public interest mission in complete security. In an open European electricity market, RTE is recognised for offering all of its customers fair access to its network, which is the first condition for healthy competition. Based on this and thanks to its investments and operating quality, RTE is constantly improving its performances to meet its customers', public authorities' and the Energy Regulation Committee's requirements. This public service action is focused on four strategic priorities: performance of industrial facilities; a human and managerial policy focused on skills and efficiency; sustainable development; professionalism and innovation. This brochure presents RTE's missions, company overview and European cooperation

RTE: a key player for the Smart Grids

International Nuclear Information System (INIS)

Bena, M.

2010-01-01

One of the main missions of RTE is to ensure at any moment the balance between the generated power and the consumed power; to achieve that goal, RTE has to work with all the Power System players, that is generating units, consumers, distribution operators and neighbouring TSOs. For that reason, RTE is a key player in the Smart Grids deployment. This generation/load balance will indeed be more difficult to obtain in the future because of both the massive penetration of intermittent generation and the active demand which is less predictable. To integrate these new actors or behaviours the best way, RTE has to develop new means to make a more flexible use of its assets. And even if a transmission network can already be considered as 'smart', the effort has to be intensified, especially in the R and D area. Three key technical fields are then to be considered: - Make the use of the existing assets more flexible, - Optimize the market design for the optimal use of the infrastructure, - Develop new facilities with a minimal environmental impact. The first two topics deal with the existing facilities; indeed, considering the assets lifetime and the difficulty to build new lines, it's very important to take advantage as far as possible of the existing network. The third topic is related to network development; the absolute need for new transmission capacities in the future has to cope with environment issues. New operating processes, including new technologies, will be needed. If some part of this work will be carried out at the national scale, more and more projects will be done at the European level. Due to the electricity market development and to the renewables penetration, the variability of the border flows is growing and needs a stronger cooperation between Transmission System Operators. ENTSO-E, the 42TSOs association that is operational since July 2009, will facilitate this common work. The publishing of its 'Research and Development Plan' is a good point. This

RTE - Activity and sustainable development report 2014. Management report consolidated financial statements 2014

International Nuclear Information System (INIS)

2015-01-01

After an interview of RTE's CEO, an overview of governance issues within the company, and a presentation of its business model, the activity report addresses the various aspects of RTE activities during 2014: grid expertise, a fair and balanced service, performance at the right price, cooperation between all players, a long term commitment, and perspectives. It also focuses on the corporate aspects: collective intelligence, workforce involvement, safety culture. The management report contains financial and legal information (significant events of 2014, economic environment, business and results, financing, financial structure, outlook for 2015, risk analysis), company information (employment, work organisation, labour relations, health and safety, training, diversity and equal opportunities, compliance with International Labour Organisation conventions), environmental information (general environmental policy, pollution and waste management, sustainable use of resources, climate change, protection and development of biodiversity), and societal information (local, economic and social impact of RTE's business, relations with people and organisations concerned by RTE's business, out-sourcing and suppliers, fair practices, other action to promote human rights). The third report presents the supervisory board (members and missions, operation, committees), the Executive Board (members and remuneration principles), the operation of general assemblies. It describes the internal control of RTE (organisation, actors), presents the policy of risk management and control, activities of audit and control within RTE. It finally presents external controls made by different public bodies

Real time elastography endoscopic ultrasound (RTE-EUS), a comprehensive review

Energy Technology Data Exchange (ETDEWEB)

Dietrich, C.F., E-mail: christoph.dietrich@ckbm.de [Med. Klinik 2, Caritas-Krankenhaus Bad Mergentheim (Germany); Department of Gastroenterology, Research Center of Gastroenterology and Hepatology, University of Medicine and Pharmacy of Craiova (Romania); Klinik für Innere Medizin, Krankenhaus Märkisch Oderland (Germany); Săftoiu, A.; Jenssen, C. [Med. Klinik 2, Caritas-Krankenhaus Bad Mergentheim (Germany); Department of Gastroenterology, Research Center of Gastroenterology and Hepatology, University of Medicine and Pharmacy of Craiova (Romania); Klinik für Innere Medizin, Krankenhaus Märkisch Oderland (Germany)

2014-03-15

Real-time elastography (RTE) performed during endoscopic ultrasound (EUS) is a relatively new technique which allows the evaluation of tissue stiffness, with the intent of better characterising lesions during EUS examinations. The aim of this comprehensive review was to describe the technique of RTE-EUS, as well as the clinical applications, including the study of pancreatic lesions, but also hepatobiliary, gastrointestinal (GI) tract pathology (including anal canal), lymph nodes, adrenal glands, lung and mediastinum, as well as urogenital applications. One of the advantages of the RTE-EUS technique is especially the possibility to be used in various locations accessible from the GI tract. Future developments are also briefly discussed, as elastography is a tissue characterising technique that will certainly not replace biopsy, but will rather be an adjunct during EUS examinations, due to its ease of use and low cost.

Real time elastography endoscopic ultrasound (RTE-EUS), a comprehensive review

International Nuclear Information System (INIS)

Dietrich, C.F.; Săftoiu, A.; Jenssen, C.

2014-01-01

Real-time elastography (RTE) performed during endoscopic ultrasound (EUS) is a relatively new technique which allows the evaluation of tissue stiffness, with the intent of better characterising lesions during EUS examinations. The aim of this comprehensive review was to describe the technique of RTE-EUS, as well as the clinical applications, including the study of pancreatic lesions, but also hepatobiliary, gastrointestinal (GI) tract pathology (including anal canal), lymph nodes, adrenal glands, lung and mediastinum, as well as urogenital applications. One of the advantages of the RTE-EUS technique is especially the possibility to be used in various locations accessible from the GI tract. Future developments are also briefly discussed, as elastography is a tissue characterising technique that will certainly not replace biopsy, but will rather be an adjunct during EUS examinations, due to its ease of use and low cost

RTE and landscape; RTE et le paysage

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-10-01

The lines are essential for the smooth operation of the electrical system. For the great majority, they are overhead. Insertion into the landscape is one of the approaches to the RTE (French manager of the electricity transportation network) environmental policy. The integration of an overhead line means finding the best possible path, taking into consideration the geography, the residential areas, the natural environment and the economic activity zones (farming, existing infrastructures and easements), landscapes and sites. The various routing possibilities are investigated in deliberation with the government services, the local councils and the different voluntary organisations concerned to find the best route. Once validated by the prefect, it is submitted to a public inquiry. The choice of the most suitable technical solution will then include mitigation measures as shown by the examples given in this brochure: line integration (traditional lines, vegetable screen, painted towers, specific towers, tower competition, particular cases, substation incoming feeders), line burial (technology, cost comparison), substation insertion.

RTE takes over Houilleres du Bassin de Lorraine's high voltage electricity network; RTE reprend le reseau electrique haute tension des Houilleres du Bassin de Lorraine

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-12-01

Houilleres du Bassin de Lorraine (HBL) decided to sell their high voltage electricity network to RTE. This takeover by RTE, the French transmission system operator, corresponds to the public service mission entrusted to it by the law of February 10, 2000, concerning the rational distribution of an electricity service in France and the local servicing of customers through the public transmission system.

RTE - 2013 Reliability Report

International Nuclear Information System (INIS)

Denis, Anne-Marie

2014-01-01

RTE publishes a yearly reliability report based on a standard model to facilitate comparisons and highlight long-term trends. The 2013 report is not only stating the facts of the Significant System Events (ESS), but it moreover underlines the main elements dealing with the reliability of the electrical power system. It highlights the various elements which contribute to present and future reliability and provides an overview of the interaction between the various stakeholders of the Electrical Power System on the scale of the European Interconnected Network. (author)

RTE increased threefold its net result in 2003

International Nuclear Information System (INIS)

Anon.

2004-01-01

RTE, the company that manages the power distribution network in France, got a sharp increase in its turnover (+10%) in 2003 to reach 4035 million euros. Its net result (276 million euros) was almost 3 times as high as it was in 2002 (105 million euros). 2 factors can explain this favourable situation: - an important power demand because of climatic reasons (hot-days and winter cold spells), and - the implementation of a new tariff for the access to the distribution network all year round

Presentation of RTE results 2003

International Nuclear Information System (INIS)

2004-01-01

For RTE, the financial year 2003 was marked by a number of achievements: our financial performances registered a clear improvement, above objectives, with turnover growing strongly; net income reached levels almost three times higher than those recorded in 2002; the economic rate of return rose to 7.1%; and debt was reduced by 470 Meuros. These results are explained by the substantial improvement in productivity, which has risen by 5% per year on average over the last three years

RTE: a first assessment after one year of existence

International Nuclear Information System (INIS)

Merlin, A.

2001-01-01

Just over a year ago, on 1 July 2000, the manager of the French public Electricity Transport Network - RTE - entered the French electricity scene. Its creation is a result of the law of 10 February 2000 concerning the modernization and development of the electric utility, which transposes into French Law the European directive of December 1996. This law, which organizes the introduction in the market French electricity scene, foresees that the transport network manager is independent from EDF's other activities, for this network can now be used not solely by the famous operator. The entire equipment and most of the skills which contribute to the management of the public transport network were thus separated from EDF's other activities and merged into what has become RTE. This separation has been carefully prepared as soon as the principles of introduction of competition in the electricity market were established by the European directive. It was created in six month with the help of the regulatory and control authorities, the Secretary of State for Industry and the Electricity Regulation Committee (CRE). This anticipation has enabled a smooth transition and if RTE remains with EDF,it is today completely independent for managerial, accounting and financial aspects. (author)

RTE 2008 carbon assessment

International Nuclear Information System (INIS)

2008-05-01

After a brief presentation of the RTE (Reseau de Transport d'Electricite, Electricity Transport Network) company, this report proposes an assessment of the various carbon emissions related to the various aspects of the activities of this company: emissions related to fuels used within the activity (industrial processes, premise heating, air conditioning, ventilation), inner emission not related to any combustion (refrigerant gas evaporations and leakages, SF 6 emissions), emissions related to the transport of materials used within the company (particularly works materials), emissions related to people mobility (personnel and visitors), emission related to wastes produced by the company, and emissions related to the company's industrial and tertiary patrimony

RTE, generation adequacy report on the electricity supply-demand balance in France. 2014 Edition + Executive Summary

International Nuclear Information System (INIS)

2014-01-01

As required by law, RTE's Generation Adequacy Report analyses the electricity supply-demand balance over the medium term (through the winter of 2018-2019) and proposes prospective scenarios for the long term (through 2030). Indeed, preserving the integrity of the French and interconnected European power systems requires that electricity supply and demand be balanced at all times. To determine the robustness of this balance, RTE simulates in detail how the power system will function factoring in a wide variety of technical and weather conditions, particularly winter cold spells. RTE then identifies generation capacity margins or deficits with regard to a security of supply criterion defined by law. The 2014 edition of the Generation Adequacy Report has some distinctive characteristics. - For the first time, the Generation Adequacy Report includes the risk analysis RTE was asked to conduct within the framework of the capacity mechanism. This analysis is the 'pivot point' of the economic signals sent to stakeholders and the responsibilities assigned to suppliers. - Also for the first time, the long-term scenarios in this Generation Adequacy Report seek to assess plausible variations in the French energy mix resulting from the energy transition for green growth bill (projet de loi relatif a la transition energetique pour la croissance verte). Future multi-annual energy programming (programmations pluriannuelles de l'energie) will include a specific section devoted to security of supply. With the Generation Adequacy Report attracting steadily more attention, RTE organised consultations in 2014 with many power system stakeholders. In line with RTE's commitment to transparency, collegiate consultations were held through the 'Network Outlook Committee' (Commission 'Perspectives du reseau'), information about which can be found on RTE's web site

RTE - Report by the Chairman of the Supervisory Board 2016

International Nuclear Information System (INIS)

2017-01-01

The Chairman of the Supervisory Board of RTE (Reseau de Transport d'Electricite) draws up and publishes an annual report on corporate governance and internal control procedures, in application of Paragraph 7 of Article L. 225-68 of French company law (Code de Commerce). This is a requirement on companies whose shares are traded on a regulated market, as is the case of RTE. Paragraph 7 of Article L. 225-68 of French company law (Code de Commerce) stipulates that the report must present: the composition of the Supervisory Board and the application of the principle of equal representation of men and women, the conditions of preparing and organising the work of the Supervisory Board, internal control and risk management procedures implemented by the company, the corporate governance code to which the company adheres. Additionally, this report must set out: the principles for determining the remuneration of senior executives, specific provisions relating to the involvement of shareholders at the General Meeting of Shareholders. Within RTE, this report has been prepared by the Legal Affairs Department, which directed a work team. They reported on the functioning of the Supervisory Board and the implementation of internal control and risk management procedures, both for RTE and for its subsidiaries. The present report was approved by the Executive Board and was submitted to the Statutory Auditors. It was then presented to the Economic and Audit Supervisory Committee on 07 February 2017 and the Supervisory Board on 09 February 2017. The report was published at the same time as the activity report, the management report and consolidated accounts, annual accounts and the sustainability report. This document takes account of the various recommendations published by the French Financial Markets Authority (AMF)

Development of extruded Ready-To-Eat (RTE) snacks using corn, black gram, roots and tuber flour blends.

Science.gov (United States)

Reddy, M Kavya; Kuna, Aparna; Devi, N Lakshmi; Krishnaiah, N; Kaur, Charanjit; Nagamalleswari, Y

2014-09-01

Extruded RTE snacks were prepared from flour blends made with corn flour, Bengal gram flour, roots and tuber flours in a proportion of 60-80: 20: 20 respectively and moisture was adjusted to 17-20 %. The roots and tubers flours were developed from potato (Solanum tuberosum), yam (Dioscorea spp.), sweet potato (Ipomoea batatas L.), taro (Colocassia esculenta) and beet root (Beta vulgaris). Different formulations were extruded at 80 ± 5 °C (heater I) and 95-105 °C (heater II) temperature, 300-350 rpm screw speed, 100 ± 10 °C die temperature and 15 ± 2 kg/h feed rate. The exit diameter of the circular die was 3 mm. Sensory acceptability, physical parameters and nutrient analysis along with storage stability of the products was conducted. The fiber and energy content of the RTE extruded snack improved in experimental samples prepared using root and tuber flours. A serving of 100 g of the snack can provide more than 400 Kcal and 10 g of protein. The overall acceptability of RTE extruded products made with potato and taro were highly acceptable compared to yam and sweet potato. The study demonstrates utilization of roots and tuber flours as potential and diverse ingredients to enhance the appearance and nutritional properties in RTE extruded snack.

Optical fibers installation the different technologies and the advantages of using the RTE power grid; Pose de fibres optiques les differentes technologies et les avantages lies a l'utilisation du reseau de transport d'electricite de RTE

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

To install optical fibers lines RTE implements two different technologies: the THYM line and the COE line. The two technologies are explained and compared with the advantages of using RTE for such an equipment. (A.L.B.)

RTE, at the heart of the Euro market - mediterranean of the electric power; RTE, au coeur du marche euro - mediterraneen de l'electricite

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This document presents the mediterranean electric power activity: the global environment, a panorama of the sector organization, the international cooperation and exchanges, the today context, the perspectives and the RTE place in North africa. (A.L.B.)

Temporal Compounding of Heat Waves in the Present and Projected Future

Science.gov (United States)

Baldwin, J. W.; Dessy, J.; Vecchi, G. A.; Oppenheimer, M.

2017-12-01

The hazard of heat waves is projected to increase significantly with global warming, motivating much recent research characterizing various aspects of these extreme events. One less examined aspect of heat waves is their temporal structure. Here we first modify existing heat wave duration definitions to flexibly account for a variety of possible heat wave temporal structures (sequences of hot and cooler days). We then examine past heat waves associated with high mortality using observational reanalysis data, and note that many past heat waves might be better described as series of hot days compounded together with short breaks of cooler days in between. We employ Geophysical Fluid Dynamics Laboratory (GFDL) global climate model (GCM) simulations to compare the frequency of these compound heat waves in the present and projected future with higher levels of atmospheric carbon dioxide. Our results indicate that temporally compound heatwaves will constitute a greater proportion of heat wave risk with global warming. Via examining synthetic autoregressive model data, we propose that this phenomenon is expected when shifting the mean of a time series with some memory and noise. Notably, an increased proportion of compound events implies that vulnerability from prior hot days will play an increasingly large role in heat wave risk, with possible implications for both heat wave-related policy and preparedness.

Outlines of RTE's R and D programme for 2017-2020

International Nuclear Information System (INIS)

2017-01-01

RTE is publishing the outlines of its R and D programme for the 2017-2020 period. The programme is aimed at strengthening RTE's capacity for anticipating the major disruptive transformations with which it will be confronted. RTE is therefore pursuing the efforts initiated during the first roadmap over the 2013-2016 period and is embarking on new efforts. Thus, RTE's R and D efforts for the 2017-2020 period will be structured into six programmes: - The 'asset management' programme. This programme continues on with activities undertaken to reach the use phase for research initiated during the first roadmap. - The 'grid infrastructure evolution' programme. This programme continues the efforts initiated under the 'Grid of the future' programme with a reinforcement of the equipments' eco-design dimension and increased use of digital technologies to implement the equipments' control systems, protection devices and associated defence plans. - The 'environment and society' programme. This programme will be strengthened in relation to the existing programme, particularly as regards the eco-design and biodiversity dimensions. - The 'power system functioning and operation' programme. Firstly, this programme continues on from a large part of the 'Power system' programme with the dual objective of ensuring that the system remains secure with all the major physical transformations leading to a true power system 2.0 (i.e. based on power electronics) and, secondly, it aims to substantially upgrade the system's operating tools through the integration of big data processing and visualisation capabilities. - The 'optimal grid development for the energy transition' programme. This programme is aimed at rethinking grid development study methods and tools in the context of the energy, societal and digital transitions currently underway, with a view to: better integrating cross-functionality with respect to operation / maintenance and asset management / development, and to proposing the

RTE results 2002: positive net income (+112 million euros), in keeping with forecasts, at the end of a year placed under the sign of quality; Bilan RTE 2002: un resultat net positif (+112 M d'euros), conforme aux previsions, au terme d'une annee placee sous le signe de la qualite

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-01

The results of RTE, the French Transmission System Operator, confirm the company's sound financial position at the end of a year placed under the sign of quality. RTE announces a net income after taxes for 2002 that is in keeping with its forecasts: +112 million euros (versus 250 million euros in 2001) for 3,657 million euros in sales revenue. 616 million euros were devoted to investments for the development and replacement of the company's transmission and interconnection networks. RTE also continued the reduction of its debt by 99 million euros. The year 2001 had experienced a cold spell at year-end, bringing with it higher-than-average revenue (+80 million euros). 2002, which was exceptionally mild at the end of the year, saw revenue fall off by 40 million euros compared with a normal year. In all, the climatic impact goes to explain a drop of 120 million euros in 2002. This drop is partially offset by additional revenue since the adoption on 1/11/02 of the network access tariff (about 30 million euros). This tariff is now substituted for the transitional price scale which was unfavourable to RTE. Operating expenses rose from 3,089 million euros to 3,316 million euros. The most significant increases are to be attributed in particular to: - the contribution of 68 million euros to the 'ETSO Fund', ETSO being the Association of European Transmission System Operators which, since 1/03/02, has ensured the compensation for network utilisation costs related to international transfers, - the gaining in momentum, with more than 80 million euros, of the network mechanical security enhancement programme decided in the wake of the storms of 1999, which aims at adapting RTE infrastructures to the new technical requirements for wind resistance. More than 720 km of power lines were erected or replaced while 12 electrical substations were connected to the RTE network in 2002. Among these projects, mention should be made of the following: the commissioning of

EDF: net profits are up by 56% in 2004. RTE: a year of change

International Nuclear Information System (INIS)

Anon.

2005-01-01

EDF has presented its financial results for 2004: a net profit of 1.3 milliard euros (+56%) and a debt reduced by 5 milliards euros. The turnover reached 46,9 milliard euros (+4.5%) but its capital was reduced drastically from 19 to 8.4 milliard euros because of both the reform of the funding of the retirement pension system and the implementation of new European accountancy norms. For the first time all foreign subsidies of EDF (except those in South-America) have contributed to the profit. EDF foresees to launch an important investment program in 2005 that will involve: the construction of an EPR (European pressurized reactor) on the Flamanville site and the construction of 6 fossil-fueled power plants. The turnover of RTE (the state company that manages the French electricity transport network) reached 4.029 milliard euros which is the same figure as the previous year but its net profit jumps by 25% to reach 347 million euros. RTE has announced that the exchanges at the borders (import and export) have increased from 113 TWh (in 2003) to 119 TWh (in 2004) which betokens a more and more dynamical European electricity market. RTE has also announced that the construction works of the 150-200 km long high voltage power line that will link the new EPR reactor at Flamanville to the national power transmission network will begin near 2010. (A.C.)

RTE results 2002: positive net income (+112 million euros), in keeping with forecasts, at the end of a year placed under the sign of quality

International Nuclear Information System (INIS)

2003-03-01

The results of RTE, the French Transmission System Operator, confirm the company's sound financial position at the end of a year placed under the sign of quality. RTE announces a net income after taxes for 2002 that is in keeping with its forecasts: +112 million euros (versus 250 million euros in 2001) for 3,657 million euros in sales revenue. 616 million euros were devoted to investments for the development and replacement of the company's transmission and interconnection networks. RTE also continued the reduction of its debt by 99 million euros. The year 2001 had experienced a cold spell at year-end, bringing with it higher-than-average revenue (+80 million euros). 2002, which was exceptionally mild at the end of the year, saw revenue fall off by 40 million euros compared with a normal year. In all, the climatic impact goes to explain a drop of 120 million euros in 2002. This drop is partially offset by additional revenue since the adoption on 1/11/02 of the network access tariff (about 30 million euros). This tariff is now substituted for the transitional price scale which was unfavourable to RTE. Operating expenses rose from 3,089 million euros to 3,316 million euros. The most significant increases are to be attributed in particular to: - the contribution of 68 million euros to the 'ETSO Fund', ETSO being the Association of European Transmission System Operators which, since 1/03/02, has ensured the compensation for network utilisation costs related to international transfers, - the gaining in momentum, with more than 80 million euros, of the network mechanical security enhancement programme decided in the wake of the storms of 1999, which aims at adapting RTE infrastructures to the new technical requirements for wind resistance. More than 720 km of power lines were erected or replaced while 12 electrical substations were connected to the RTE network in 2002. Among these projects, mention should be made of the following: the commissioning of the first French

Conditional Stability of Solitary-Wave Solutions for Generalized Compound KdV Equation and Generalized Compound KdV-Burgers Equation

International Nuclear Information System (INIS)

Zhang Weiguo; Dong Chunyan; Fan Engui

2006-01-01

In this paper, we discuss conditional stability of solitary-wave solutions in the sense of Liapunov for the generalized compound KdV equation and the generalized compound KdV-Burgers equations. Linear stability of the exact solitary-wave solutions is proved for the above two types of equations when the small disturbance of travelling wave form satisfies some special conditions.

Application of the Radiative Transfer Equation (RTE) to Scattering by ...

African Journals Online (AJOL)

Application of the Radiative Transfer Equation (RTE) to Scattering by a Dust Aerosol Layer. ... Incident radiation in its journey through the atmosphere before reaching the earth surface encounters particles of different sizes and composition such as dust aerosols resulting in interactions that lead to absorption and scattering.

RTE - 2013 Activity Report, 2013 Activity and Sustainable Development Report, financial results for 2013, Report of the Chairman of the Supervisory Board

International Nuclear Information System (INIS)

2014-01-01

RTE is the operator of the high and extra high-voltage transmission system in France. RTE operates, develops and maintains it. This role places RTE at the heart of smart power, supplying its customers: generators, distribution system operators, industrial customers and traders. RTE deploys its expertise to achieve smart power, with three objectives: - To optimise the power system so that everything operates at the lowest cost, every second, whatever the weather brings, whatever the level of supply and demand. - To guarantee a secure power supply, by offering tools and mechanisms that can be used to adjust generation and power consumption. - To adapt the grid to energy transition through constant innovation. RTE counts 8,400 employees. This document gathers both French and English versions of the 2013 Activity and Sustainable Development Report and the English version of the 2013 financial results and of the Report of the Chairman of the Supervisory Board

X-real-time executive (X-RTE) an ultra-high reliable real-time executive for safety critical systems

International Nuclear Information System (INIS)

Suresh Babu, R.M.

1995-01-01

With growing number of application of computers in safety critical systems of nuclear plants there has been a need to assure high quality and reliability of the software used in these systems. One way to assure software quality is to use qualified software components. Since the safety systems and control systems are real-time systems there is a need for a real-time supervisory software to guarantee temporal response of the system. This report describes one such software package, called X-Real-Time Executive (or X-RTE), which was developed in Reactor Control Division, BARC. The report describes all the capabilities and unique features of X-RTE and compares it with a commercially available operating system. The features of X-RTE include pre-emptive scheduling, process synchronization, inter-process communication, multi-processor support, temporal support, debug facility, high portability, high reliability, high quality, and extensive documentation. Examples have been used very liberally to illustrate the underlying concepts. Besides, the report provides a brief description about the methods used, during the software development, to assure high quality and reliability of X-RTE. (author). refs., 11 figs., tabs

RTE - Business and sustainable development report 2015. Management report consolidated financial statements 2015. Report by the chairman of the supervisory board 2015

International Nuclear Information System (INIS)

2016-01-01

After an introduction by the RTE's CEO, brief presentations of governance bodies (management board, executive committee, supervisory board), and a presentation of some statistics illustrating RTE activities and efficiency, the activity report addresses and illustrates some specific issues: moving for local to European scale by promoting electrical solidarity among the regions, climate solutions in support of sustainable, economical and efficient power system, experts solutions for tomorrow's electricity. The management report contains financial and legal information (significant events of 2015, economic environment, business and results, financing, financial structure, outlook for 2016, risk analysis), company information (employment, work organisation, labour relations, health and safety, training, diversity and equal opportunities, compliance with International Labour Organisation conventions), environmental information (general environmental policy, pollution and waste management, sustainable use of resources, climate change, protection and development of biodiversity), and societal information (local, economic and social impact of RTE's business, relations with people and organisations concerned by RTE's business, out-sourcing and suppliers, fair practices, other action to promote human rights). The third report presents the governance organisation of RTE (supervisory board, executive board, principles of remuneration of supervisory board and executive board members, general meetings, information publication). It describes the internal control at RTE (organisation, actors), presents the policy of risk management and control, activities of audit and control within RTE. It finally presents external controls made by different public bodies

Do leafy green vegetables and their ready-to-eat [RTE] salads carry a risk of foodborne pathogens?

Science.gov (United States)

Mercanoglu Taban, Birce; Halkman, A Kadir

2011-12-01

Over the past 10 years, there is an increasing demand for leafy green vegetables and their ready-to-eat (RTE) salads since people changed their eating habits because of healthier lifestyle interest. Nevertheless fresh leafy green vegetables and their RTE salads are recognized as a source of food poisoning outbreaks in many parts of the world. However, this increased proportion of outbreaks cannot be completely explained by increased consumption and enhanced surveillance of them. Both in Europe and in the USA, recent foodborne illness outbreaks have revealed links between some pathogens and some leafy green vegetables such as mostly lettuces and spinaches and their RTE salads since fresh leafy green vegetables carry the potential risk of microbiological contamination due to the usage of untreated irrigation water, inappropriate organic fertilizers, wildlife or other sources that can occur anywhere from the farm to the fork such as failure during harvesting, handling, processing and packaging. Among a wide range of pathogens causing foodborne illnesses, Escherichia coli O157:H7, Salmonella spp., and Listeria monocytogenes are the most common pathogens that contaminate leafy green vegetables. Children, the elderly, pregnant women and immunocompromised people are the most at risk for developing complications from foodborne illness as a result of eating contaminated leafy greens or their RTE salads. These outbreaks are mostly restaurant associated or they sometimes spread across several countries by international trade routes. This review summarizes current observations concerning the contaminated leafy green vegetables and their RTE salads as important vehicles for the transmission of some foodborne pathogens to humans. Copyright © 2011 Elsevier Ltd. All rights reserved.

Compound waves in a higher order nonlinear model of thermoviscous fluids

DEFF Research Database (Denmark)

Rønne Rasmussen, Anders; Sørensen, Mads Peter; Gaididei, Yuri B.

2016-01-01

A generalized traveling wave ansatz is used to investigate compound shock waves in a higher order nonlinear model of a thermoviscous fluid. The fluid velocity potential is written as a traveling wave plus a linear function of space and time. The latter offers the possibility of predicting...

Radiative characterization of random fibrous media with long cylindrical fibers: Comparison of single- and multi-RTE approaches

Science.gov (United States)

Randrianalisoa, Jaona; Haussener, Sophia; Baillis, Dominique; Lipiński, Wojciech

2017-11-01

Radiative heat transfer is analyzed in participating media consisting of long cylindrical fibers with a diameter in the limit of geometrical optics. The absorption and scattering coefficients and the scattering phase function of the medium are determined based on the discrete-level medium geometry and optical properties of individual fibers. The fibers are assumed to be randomly oriented and positioned inside the medium. Two approaches are employed: a volume-averaged two-intensity approach referred to as multi-RTE approach and a homogenized single-intensity approach referred to as the single-RTE approach. Both approaches require effective properties, determined using direct Monte Carlo ray tracing techniques. The macroscopic radiative transfer equations (for single intensity or two volume-averaged intensities) with the corresponding effective properties are solved using Monte Carlo techniques and allow for the determination of the radiative flux distribution as well as overall transmittance and reflectance of the medium. The results are compared against predictions by the direct Monte Carlo simulation on the exact morphology. The effects of fiber volume fraction and optical properties on the effective radiative properties and the overall slab radiative characteristics are investigated. The single-RTE approach gives accurate predictions for high porosity fibrous media (porosity about 95%). The multi-RTE approach is recommended for isotropic fibrous media with porosity in the range of 79-95%.

RTE, at the heart of the Euro market - mediterranean of the electric power

International Nuclear Information System (INIS)

2006-01-01

This document presents the mediterranean electric power activity: the global environment, a panorama of the sector organization, the international cooperation and exchanges, the today context, the perspectives and the RTE place in North africa. (A.L.B.)

The RTE inversion on FPGA aboard the solar orbiter PHI instrument

Science.gov (United States)

Cobos Carrascosa, J. P.; Aparicio del Moral, B.; Ramos Mas, J. L.; Balaguer, M.; López Jiménez, A. C.; del Toro Iniesta, J. C.

2016-07-01

In this work we propose a multiprocessor architecture to reach high performance in floating point operations by using radiation tolerant FPGA devices, and under narrow time and power constraints. This architecture is used in the PHI instrument that carries out the scientific analysis aboard the ESA's Solar Orbiter mission. The proposed architecture, in a SIMD flavor, is aimed to be an accelerator within the Data Processing Unit (it is composed by a main Leon processor and two FPGAs) for carrying out the RTE inversion on board the spacecraft using a relatively slow FPGA device - Xilinx XQR4VSX55-. The proposed architecture squeezes the FPGA resources in order to reach the computational requirements and improves the ground-based system performance based on commercial CPUs regarding time and power consumption. In this work we demonstrate the feasibility of using this FPGA devices embedded in the SO/PHI instrument. With that goal in mind, we perform tests to evaluate the scientific results and to measure the processing time and power consumption for carrying out the RTE inversion.

Balance responsible entity. You would like to intervene on the French electricity market, RTE brings you the Balance Responsible service; Responsable d'equilibre. Vous voulez intervenir sur le marche francais de l'electricite, RTE a mis en place pour vous le service responsable d'equilibre

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-02-01

The mission of RTE, the French manager of the power transportation grid, is to maintain the public electricity transmission system continuity and quality, by guaranteeing fair and equal access to the system to all market participants. To do this, RTE operates the public electricity transmission system in all safety, by maintaining the balance between supply and demand in real time and by physical guaranteeing that consumption sites are supplied and that injections can take place on production sites. As part of this mission, RTE has set up the balance responsible service, aimed at enabling participants in the electricity market to engage in commercial transactions whilst minimizing the cost of setting imbalances between their supply on the one hand, and their deliveries on the other. This brochure describes the work of balance responsible entity, the perimeter of this service, the calculation of imbalances (difference between injections and extractions), their prices, the subscription to the balance responsible service and the respective contributions of the balance responsible service and of RTE. (J.S.)

The equilibrium between the offer and the demand of the electric power in France. The provisional evaluation of the RTE edition 2005

International Nuclear Information System (INIS)

2005-01-01

Because the electric power cannot be storage, the RTE (electric power transport network) manages in real time the equilibrium of the electric power flux on the transport network. Another mission of RTE is the anticipation at middle and long dated, of this equilibrium. This document recalls and details these missions. (A.L.B.)

First-principles calculations of two cubic fluoropervskite compounds: RbFeF3 and RbNiF3

Science.gov (United States)

Mubarak, A. A.; Al-Omari, Saleh

2015-05-01

We present first-principles calculations of the structural, elastic, electronic, magnetic and optical properties for RbFeF3 and RbNiF3. The full-potential linear augmented plan wave (FP-LAPW) method within the density functional theory was utilized to perform the present calculations. We employed the generalized gradient approximation as exchange-correlation potential. It was found that the calculated analytical lattice parameters agree with previous studies. The analysis of elastic constants showed that the present compounds are elastically stable and anisotropic. Moreover, both compounds are classified as a ductile compound. The calculations of the band structure and density functional theory revealed that the RbFeF3 compound has a half-metallic behavior while the RbNiF3 compound has a semiconductor behavior with indirect (M-Γ) band gap. The ferromagnetic behavior was studied for both compounds. The optical properties were calculated for the radiation of up to 40 eV. A beneficial optics technology is predicted as revealed from the optical spectra.

Wave study of compound eyes for efficient infrared detection

Science.gov (United States)

Kilinc, Takiyettin Oytun; Hayran, Zeki; Kocer, Hasan; Kurt, Hamza

2017-08-01

Improving sensitivity in the infrared spectrum is a challenging task. Detecting infrared light over a wide bandwidth and at low power consumption is very important. Novel solutions can be acquired by mimicking biological eyes such as compound eye with many individual lenses inspired from the nature. The nature provides many ingenious approaches of sensing and detecting the surrounding environment. Even though compound eye consists of small optical units, it can detect wide-angle electromagnetic waves and it has high transmission and low reflection loss. Insects have eyes that are superior compared to human eyes (single-aperture eyes) in terms of compactness, robustness, wider field of view, higher sensitivity of light intensity and being cheap vision systems. All these desired properties are accompanied by an important drawback: lower spatial resolution. The first step to investigate the feasibility of bio-inspired optics in photodetectors is to perform light interaction with the optical system that gather light and detect it. The most common method used in natural vision systems is the ray analysis. Light wave characteristics are not taken into consideration in such analyses, such as the amount of energy at the focal point or photoreceptor site, the losses caused by reflection at the interfaces and absorption cannot be investigated. In this study, we present a bio-inspired optical detection system investigated by wave analysis. We numerically model the wave analysis based on Maxwell equations from the viewpoint of efficient light detection and revealing the light propagation after intercepting the first interface of the eye towards the photoreceptor site.

Performance evaluation of compounding and directional beamforming techniques for carotid strain imaging using plane wave transmissions

DEFF Research Database (Denmark)

Hansen, Hendrik H.G.; Stuart, Matthias Bo; Villagómez Hoyos, Carlos Armando

2014-01-01

Carotid strain imaging in 3D is not possible with conventional focused imaging, because the frame rate is too low. Plane wave ultrasound provides sufficiently high frame rates, albeit at t he cost of image quality, especially in the off - axis direction due to the lack of focusing . Multiple...... techniques have been developed to cope with the low off - axis image quality when performing 2D (and in future 3D) motion estimation: cross correlation with directional beamforming (with or without RF (coherent) compounding) and displacement compounding. This study compares the precision of these techniques...... with RF compounding and 2D displacement compounding with θ = ~20 ° per formed equally and best with a relative root - mean - squared error of ~2% with respect to the analytical solution . The mean and standard deviation of the estimated motion direction for 2D displacement compounding with θ = 20 ° was 0...

First-principles calculations of two cubic fluoropervskite compounds: RbFeF3 and RbNiF3

International Nuclear Information System (INIS)

Mubarak, A.A.; Al-Omari, Saleh

2015-01-01

We present first-principles calculations of the structural, elastic, electronic, magnetic and optical properties for RbFeF 3 and RbNiF 3 . The full-potential linear augmented plan wave (FP-LAPW) method within the density functional theory was utilized to perform the present calculations. We employed the generalized gradient approximation as exchange-correlation potential. It was found that the calculated analytical lattice parameters agree with previous studies. The analysis of elastic constants showed that the present compounds are elastically stable and anisotropic. Moreover, both compounds are classified as a ductile compound. The calculations of the band structure and density functional theory revealed that the RbFeF 3 compound has a half-metallic behavior while the RbNiF 3 compound has a semiconductor behavior with indirect (M–Γ) band gap. The ferromagnetic behavior was studied for both compounds. The optical properties were calculated for the radiation of up to 40 eV. A beneficial optics technology is predicted as revealed from the optical spectra. - Highlights: • RbFeF 3 and RbNiCl 3 compounds are elastically stable. • RbFeF 3 and RbNiCl 3 compounds are classified as a ductile compound. • The RbFeF 3 compound has a half-metallic behavior while the RbNiF 3 compound has a semiconductor behavior. • The optical properties were calculated for the radiation of up to 40 eV

Growth of Listeria monocytogenes on a RTE-meat matrix enhances cell invasiveness to mouse J774A.1 macrophages.

Science.gov (United States)

Lin, Chen-Si; Wang, Chinling; Tsai, Hsiang-Jung; Chou, Chung-Hsi

2010-11-15

It remains unclear whether the growth of Listeria monocytogenes on a ready-to-eat (RTE) meat matrix has an impact on the bacterium's pathogenic abilities. In this study, we investigated the impact of environments on virulence by growing L. monocytogenes (F2365 strain) on brain heart infusion agar (BHI), tryptic soy agar (TSA), and RTE turkey meat matrices. Bacteria cultured from these media were harvested and used to infect mouse macrophage cell line J774A.1 with different MOIs to examine their invasion ability. At MOI=10 and 50, the numbers of bacteria recovered from cells infected with turkey-meat-grown Listeria were significantly higher than those from the two nutrient-rich growth media. Additionally, MOI played a role in determining L. monocytogenes recovery rates, since significant differences were found amongst all three groups at low MOI, while no significant differences were found between BHI and TSA groups at high MOI. These results indicate that environmental changes affect the ability of L. monocytogenes to invade and survive intracellularly while grown on RTE-meat matrix. Copyright © 2010 Elsevier B.V. All rights reserved.

Exact travelling wave solutions of the (3+1)-dimensional mKdV-ZK ...

Indian Academy of Sciences (India)

In this paper, the new generalized (′/)-expansion method is executed to find the travelling wave solutions of the (3+1)-dimensional mKdV-ZK equation and the (1+1)-dimensional compound KdVB equation. The efficiency of this method for finding exact and travelling wave solutions has been demonstrated. It is shown ...

Periodicity effects on compound waves guided by a thin metal slab sandwiched between two periodically nonhomogeneous dielectric materials

Science.gov (United States)

Chiadini, Francesco; Fiumara, Vincenzo; Scaglione, Antonio; Lakhtakia, Akhlesh

2017-10-01

Surface-plasmon-polariton waves can be compounded when a sufficiently thin metal layer is sandwiched between two half spaces filled with dissimilar periodically nonhomogeneous dielectric materials. We solved the boundary-value problem for compound waves guided by a layer of a homogeneous and isotropic metal sandwiched between a structurally chiral material (SCM) and a periodically multilayered isotropic dielectric (PMLID) material. We found that the periodicities of the PMLID material and the SCM are crucial to excite a multiplicity of compound guided waves arising from strong coupling between the two interfaces.

Development of extruded Ready-To-Eat (RTE) snacks using corn, black gram, roots and tuber flour blends

OpenAIRE

Reddy, M. Kavya; Kuna, Aparna; Devi, N. Lakshmi; Krishnaiah, N.; Kaur, Charanjit; Nagamalleswari, Y.

2014-01-01

Extruded RTE snacks were prepared from flour blends made with corn flour, Bengal gram flour, roots and tuber flours in a proportion of 60–80: 20: 20 respectively and moisture was adjusted to 17–20 %. The roots and tubers flours were developed from potato (Solanum tuberosum), yam (Dioscorea spp.), sweet potato (Ipomoea batatas L.), taro (Colocassia esculenta) and beet root (Beta vulgaris). Different formulations were extruded at 80 ± 5 °C (heater I) and 95–105 °C (heater II) temperature, 300–3...

MiRTE: Mixed Reality Triage and Evacuation game for Mass Casualty information systems design, testing and training.

Science.gov (United States)

Yu, Xunyi; Ganz, Aura

2011-01-01

In this paper we introduce a Mixed Reality Triage and Evacuation game, MiRTE, that is used in the development, testing and training of Mass Casualty Incident (MCI) information systems for first responders. Using the Source game engine from Valve software, MiRTE creates immersive virtual environments to simulate various incident scenarios, and enables interactions between multiple players/first responders. What distinguishes it from a pure computer simulation game is that it can interface with external mass casualty incident management systems, such as DIORAMA. The game will enable system developers to specify technical requirements of underlying technology, and test different alternatives of design. After the information system hardware and software are completed, the game can simulate various algorithms such as localization technologies, and interface with an actual user interface on PCs and Smartphones. We implemented and tested the game with the DIORAMA system.

A review of the theoretical and numerical approaches to modeling skyglow: Iterative approach to RTE, MSOS, and two-stream approximation

International Nuclear Information System (INIS)

Kocifaj, Miroslav

2016-01-01

The study of diffuse light of a night sky is undergoing a renaissance due to the development of inexpensive high performance computers which can significantly reduce the time needed for accurate numerical simulations. Apart from targeted field campaigns, numerical modeling appears to be one of the most attractive and powerful approaches for predicting the diffuse light of a night sky. However, computer-aided simulation of night-sky radiances over any territory and under arbitrary conditions is a complex problem that is difficult to solve. This study addresses three concepts for modeling the artificial light propagation through a turbid stratified atmosphere. Specifically, these are two-stream approximation, iterative approach to Radiative Transfer Equation (RTE) and Method of Successive Orders of Scattering (MSOS). The principles of the methods, their strengths and weaknesses are reviewed with respect to their implications for night-light modeling in different environments. - Highlights: • Three methods for modeling nightsky radiance are reviewed. • The two-stream approximation allows for rapid calculation of radiative fluxes. • The above approach is convenient for modeling large uniformly emitting areas. • SOS is applicable to heterogeneous deployment of well-separated cities or towns. • MSOS is generally CPU less-intensive than traditional 3D RTE.

Annual report on electricity quality - 2013 results

International Nuclear Information System (INIS)

2014-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2013 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2016 results

International Nuclear Information System (INIS)

2016-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2016 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2014 results

International Nuclear Information System (INIS)

2015-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2014 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2015 results

International Nuclear Information System (INIS)

2016-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2015 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2008 results

International Nuclear Information System (INIS)

2009-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2008 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2009 results

International Nuclear Information System (INIS)

2010-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2009 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2011 results

International Nuclear Information System (INIS)

2012-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2011 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2012 results

International Nuclear Information System (INIS)

2013-01-01

Every year, RTE, the French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2012 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Annual report on electricity quality - 2010 results

International Nuclear Information System (INIS)

2011-01-01

Every year, RTE, The French transmission system operator, evaluates the electricity quality of the French grid. Quality covers two aspects: the continuity of supply (percentage of outages) and the voltage wave quality (temporary or continuous disturbances). This report presents: the 2010 key figures and highlights, RTE's electricity quality commitments, RTE's technical results and quality assurance, and RTE's action for grid performances improvement

Energy days: RTE opens the public the doors of more than 30 electric power transport installations in France; Journees de l'energie: RTE ouvre au public les portes de plus de 30 installations de transport d'electricite en France

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

From the 14 to the 20 may 2001, the RTE (Electric power Transportation Network) proposed many visits of its installations in France to inform the public on the missions, the jobs and the participation to a durable economic development of this electric utility. This operation participates to the Energy Days organized by the Economy, Finance and Industry Department. (A.L.B.)

Presence of Trihalomethanes in ready-to-eat vegetables disinfected with chlorine.

Science.gov (United States)

Coroneo, Valentina; Carraro, Valentina; Marras, Barbara; Marrucci, Alessandro; Succa, Sara; Meloni, Barbara; Pinna, Antonella; Angioni, Alberto; Sanna, Adriana; Schintu, Marco

2017-12-01

Trihalomethanes (THMs) - CHCl 3 , CHCl 2 Br, CHClBr 2 and CHBr 3 - are drinking water disinfection by-products (DBPs). These compounds can also be absorbed by different types of foods, including ready-to-eat (RTE) fresh vegetables. The potential absorption of THMs during washing of RTE vegetables could pose a potential risk to consumers' health. The concentration of THMs in the water used in the manufacturing process of these products shall not exceed the limit of 100 or 80 µgL -1 according to European Union (EU) and United States legislation, respectively. By contrast, there is little information about the presence of such compounds in the final product. This study evaluated the concentration of THMs in different types of RTE vegetables (carrots, iceberg lettuce, lettuce, mixed salad, parsley, parsley and garlic, rocket salad, valerian) after washing with chlorinated water. In the 115 samples analysed, the average value of total THMs was equal to 76.7 ng g -1 . Chloroform was the THM present in the largest percentage in all the RTE vegetables. These results show that the process of washing RTE vegetables should be optimised in order to reduce the risk for consumers associated with the presence of DBPs.

Acceptance of renewable energies on the grid. RTE is being mobilised. Regional schemes, status on the 31 March 2014

International Nuclear Information System (INIS)

2014-01-01

This document first presents the regulatory framework of the French regional schemes on climate, air and energy (SRCAE) and of the regional schemes of connection to the grid of renewable energies (S3REnR), and briefly indicates their content, their elaboration and implementation process. A map indicates the current situation or status of these SRCAEs and S3REnRs in the different regions (elaboration in progress, approved and published, or registered). It presents the situation before the introduction of these regional schemes, proposes a brief overview of SRCAE objectives by 2020 for photovoltaic and wind energy, indicates some aspects of RTE commitment for the specific case of renewable energies (projected installed power, funding), briefly presents the status of the S3REnR in Auvergne and in Picardie

Improved Plane-Wave Ultrasound Beamforming by Incorporating Angular Weighting and Coherent Compounding in Fourier Domain.

Science.gov (United States)

Chen, Chuan; Hendriks, Gijs A G M; van Sloun, Ruud J G; Hansen, Hendrik H G; de Korte, Chris L

2018-05-01

In this paper, a novel processing framework is introduced for Fourier-domain beamforming of plane-wave ultrasound data, which incorporates coherent compounding and angular weighting in the Fourier domain. Angular weighting implies spectral weighting by a 2-D steering-angle-dependent filtering template. The design of this filter is also optimized as part of this paper. Two widely used Fourier-domain plane-wave ultrasound beamforming methods, i.e., Lu's f-k and Stolt's f-k methods, were integrated in the framework. To enable coherent compounding in Fourier domain for the Stolt's f-k method, the original Stolt's f-k method was modified to achieve alignment of the spectra for different steering angles in k-space. The performance of the framework was compared for both methods with and without angular weighting using experimentally obtained data sets (phantom and in vivo), and data sets (phantom) provided by the IEEE IUS 2016 plane-wave beamforming challenge. The addition of angular weighting enhanced the image contrast while preserving image resolution. This resulted in images of equal quality as those obtained by conventionally used delay-and-sum (DAS) beamforming with apodization and coherent compounding. Given the lower computational load of the proposed framework compared to DAS, to our knowledge it can, therefore, be concluded that it outperforms commonly used beamforming methods such as Stolt's f-k, Lu's f-k, and DAS.

On-Line Generation of 3D-Waves

DEFF Research Database (Denmark)

Frigaard, Peter

1992-01-01

The paper describes the technique of filtering white noise for on-line generation of 3D-waves on a small computer in the laboratory. The wave generation package is implemented and tested in the 3D-wave basin at the University of Aalborg.......The paper describes the technique of filtering white noise for on-line generation of 3D-waves on a small computer in the laboratory. The wave generation package is implemented and tested in the 3D-wave basin at the University of Aalborg....

Ab-initio thermodynamic and elastic properties of AlNi and AlNi3 intermetallic compounds

Science.gov (United States)

Yalameha, Shahram; Vaez, Aminollah

2018-04-01

In this paper, thermodynamic and elastic properties of the AlNi and AlNi3 were investigated using density functional theory (DFT). The full-potential linearized augmented plane-wave (APW) in the framework of the generalized gradient approximation as used as implemented in the Wien2k package. The temperature dependence of thermal expansion coefficient, bulk modulus and heat capacity in a wide range of temperature (0-1600 K) were investigated. The calculated elastic properties of the compounds show that both intermetallic compounds of AlNi and AlNi3 have surprisingly negative Poisson’s ratio (NPR). The results were compared with other experimental and computational data.

Modeling the high pressure inactivation kinetics of Listeria monocytogenes on RTE cooked meat products

DEFF Research Database (Denmark)

Hereu, A.; Dalgaard, Paw; Garriga, M.

2012-01-01

High pressure (HP) inactivation curves of Listeria monocytogenes CTC1034 (ca. 107CFU/g) on sliced RTE cooked meat products (ham and mortadella) were obtained at pressures from 300 to 800MPa. A clear tail shape was observed at pressures above 450MPa and the log-linear with tail primary model...... provided the best fit to the HP-inactivation kinetics. The relationships between the primary kinetic parameters (log kmax and log Nres) and pressure treatments were described by a polynomial secondary model. To estimate HP-inactivation of L. monocytogenes in log (N/N0) over time, a one-step global fitting...

E3D, 3-D Elastic Seismic Wave Propagation Code

International Nuclear Information System (INIS)

Larsen, S.; Harris, D.; Schultz, C.; Maddix, D.; Bakowsky, T.; Bent, L.

2004-01-01

1 - Description of program or function: E3D is capable of simulating seismic wave propagation in a 3D heterogeneous earth. Seismic waves are initiated by earthquake, explosive, and/or other sources. These waves propagate through a 3D geologic model, and are simulated as synthetic seismograms or other graphical output. 2 - Methods: The software simulates wave propagation by solving the elasto-dynamic formulation of the full wave equation on a staggered grid. The solution scheme is 4-order accurate in space, 2-order accurate in time

Listeria monocytogenes in RTE foods marketed in Italy: prevalence and automated EcoRI ribotyping of the isolates.

Science.gov (United States)

Meloni, Domenico; Galluzzo, Pietro; Mureddu, Anna; Piras, Francesca; Griffiths, Mansel; Mazzette, Rina

2009-02-15

The aims of the present study were: (a) to investigate the prevalence and the enumeration of Listeria monocytogenes in 200 samples of ready to eat (RTE) foods of animal and vegetal origin collected from different outlets and processing plants in Sardinia; (b) to characterize the isolates by phenotypical and molecular methods; (c) to analyze a subset of 42 L. monocytogenes by automated EcoRI ribotyping in order to predict the strain's potential virulence for humans. The strains were isolated from: smoked fish products, cooked marinated products, meat products and pre-packaged mixed vegetable salads. Of the samples tested, 22% were positive for Listeria spp. The prevalence of L. monocytogenes was 9.5%, while the level of L. monocytogenes in the positive samples was 93%), belonging to 17 different DuPont Identification Library Codes (DUP-IDs) clones. The Simpson's numerical index of discrimination was 0.911. Cluster analysis pointed out a high similarity among strains isolated from meat, fish, and vegetables of different origin. These results confirmed the existence of a widespread population of L. monocytogenes, characterized by highly related strains existing in different geographical areas. 65% of these strains belonged to lineage II (serotypes 1/2a and 1/2c), subtypes known to be associated with sporadic human listeriosis outbreaks. The remaining 35% of the isolates (serotypes 1/2b, 3b and 4b) were allocated to lineage I and belong to distinct clonal groups (DUP-ID 1038 and 1042), which again have been associated with several outbreaks of human listeriosis. Neither atypical profiles nor lineage III strains were found. EcoRI ribotyping was confirmed as a rapid and reliable method for L. monocytogenes typing, providing useful data for epidemiologic and clonality surveys of L. monocytogenes strains isolated from RTE foods.

Deep inelastic scattering in formalism with wave functions of rest compound system

International Nuclear Information System (INIS)

Sisakyan, A.N.; Kvinikhidze, A.N.; Khvedelidze, A.M.

1987-01-01

One of the most simple examples of interaction of compound systems: deep inelastic scattering of the point particle on hadron is considered. By choosing the compound particle (hadron) rest system the corresponding cross section is expressed in terms of more usual from the view point of nonrelativistic quantum mechanics wave functions of the rest bound state. A new variant of structure functions expansion into a series in terms of the coupling constant is suggested. Each therm of a series due to correct account of the energy conservation law in any order of the perturbation theory possess spectral property. Analysis in QCD shows that in the bound state rest system (P-vector=0) the pulse approximation though satisfies the requirements of scale invariance is insufficient for correct description of elastic limit x Bj →1 by contrast to P Z →∞ system. It means that parton model is equivalent to pulse approximation only in P Z →∞ system. To obtain the leading in asymptotic region x Bj →1 terms account of component interaction in the finite state is necessary. The simplicity and physical evidence of the wave functions are attained due to the seeming complication of calculations according to the perturbation theory

Real-time sonoelastography compared to magnetic resonance imaging using four different modalities at 3.0 T in the detection of prostate cancer: strength and weaknesses.

Science.gov (United States)

Pelzer, Alexandre E; Heinzelbecker, Julia; Weiß, Christel; Frühbauer, Dominik; Weidner, Anja M; Kirchner, Matthias; Stroebel, Philipp; Schoenberg, Stephan O; Dinter, Dietmar J

2013-05-01

To compare the results of RTE with four different modalities at 3.0 T using endorectal and body phased array coil in the detection of PC. Between May 2009 and July 2010, 50 patients with biopsy proven PC scheduled for radical prostatectomy (RP) were examined. All patients underwent RTE of the prostate and 3.0 T endorectal MRI. The investigators were unaware of the clinical data and of each others results. RTE detected PC in 46 (92%) and MRI in 42 (84%) of the patients. Depending on the analysis sensitivity was 44.1-58.9% for RTE and 36.7-43.1% for MRI. Specificity was 83.0-74.8% for RTE and 85.9-79.8% for MRI. Sensitivity was significantly higher for RTE (16-sectors: p=0.0348; 8-sectors: p=0.0002) and showed better results in the dorsal (RTE: 51.9%; MRT: 37.7%) and apical to middle (RTE: 66.7%-80.0%; MRI: 41.7%-60.0%) parts of the prostate. MRI showed better results in the base (MRI: 19.4%; RTE: 14.9%) and transitional zone (TZ) (MRI: 34.7%; RTE: 29.6%). Concerning capsular involvement the results were comparable with sensitivity and specificity of RTE being 79.2% and 80.0% compared to 80.8% and 70.0% of MRI. Concerning sensitivity RTE showed advantages in apical and middle parts whereas MRI may provide advantages in the glands' base and TZ. Both RTE and MRI have limitations particularly in basal and ventral parts. Most of the undetected tumours were of low tumour volume and Gleason Score. Considering capsular involvement both techniques showed comparable results. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

RTE - Activity and sustainable development report 2016 + Business report - Consolidated accounts

International Nuclear Information System (INIS)

2017-01-01

This document gathers several reports. The first one is an activity report which proposes an overview of RTE activities by outlining the contribution to the improvement of territory, customer, and electric power system performance, the contribution to innovation in terms of energy and digital transition (for example, development of smart grids), and development perspectives in terms of use of open data, of development of partnerships, and of work organisation. The next report is a business report which gives and comments financial and legal information (discussion of various accounting aspects and elements), social information (employment, work organisation, social relationships, safety, health, life quality, training, equal opportunities), environmental information (general policy, circular economy, struggle against climate change and adaptation, protection and development of biodiversity), and societal information. The last part contains a table of consolidated accounts followed by a detailed discussion and comment of its content

Using of P2P Networks for Acceleration of RTE Tasks Solving

Directory of Open Access Journals (Sweden)

Adrian Iftene

2008-07-01

Full Text Available In the last years the computational Grids have become an important research area in large-scale scientific and engineering research. Our approach is based on Peer-to-peer (P2P networks, which are recognized as one of most used architectures in order to achieve scalability in key components of Grid systems. The main scope in using of a computational Grid was to improve the computational speed of systems that solve complex problems from Natural Language processing field. We will see how can be implemented a computational Grid using the P2P model, and how can be used SMB protocol for file transfer. After that we will see how we can use this computational Grid, in order to improve the computational speed of a system used in RTE competition [1], a new complex challenge from Natural Language processing field.

Bis(1,3-dithiole) Compounds

DEFF Research Database (Denmark)

Andersen, Jan Rud; Engler, E. M.; Green, D. C.

1977-01-01

There is described the preparation of bis-1,3-dithiole compounds (I) which are key synthetic precursors for the preparation of new polymeric metal bis(dithiolene) (i.e., II) and tetrathiafulvalene compounds (i.e., III): (Image Omitted)...

Temperature studies of optical parameters of (Ag3AsS3)0.6(As2S3)0.4 thin films prepared by rapid thermal evaporation and pulse laser deposition

Science.gov (United States)

Studenyak, I. P.; Kutsyk, M. M.; Buchuk, M. Yu.; Rati, Y. Y.; Neimet, Yu. Yu.; Izai, V. Yu.; Kökényesi, S.; Nemec, P.

2016-02-01

(Ag3AsS3)0.6(As2S3)0.4 thin films were deposited using rapid thermal evaporation (RTE) and pulse laser deposition (PLD) techniques. Ag-enriched micrometre-sized cones (RTE) and bubbles (PLD) were observed on the thin film surface. Optical transmission spectra of the thin films were studied in the temperature range 77-300 K. The Urbach behaviour of the optical absorption edge in the thin films due to strong electron-phonon interaction was observed, the main parameters of the Urbach absorption edge were determined. Temperature dependences of the energy position of the exponential absorption edge and the Urbach energy are well described in the Einstein model. Dispersion and temperature dependences of refractive indices were analysed; a non-linear increase of the refractive indices with temperature was revealed. Disordering processes in the thin films were studied and compared with bulk composites, the differences between the thin films prepared by RTE and PLD were analysed.

Origin of d{sup 0} half-metallic characteristic in DO{sub 3}-type XO{sub 3} (X=Li, Na, K and Rb) compounds

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaotian [School of Material Sciences and Engineering, Hebei University of Technology, Tianjin 300130 (China); Institute for Superconducting and Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Cheng, Zhenxiang, E-mail: cheng@uow.edu.au [Institute for Superconducting and Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Wang, Jianli [Institute for Superconducting and Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Rozale, Habib [Condensed Matter and Sustainable Development Laboratory, Physics Department, University of Sidi-Bel-Abbès, 22000 Sidi-Bel-Abbès (Algeria); Yang, Juntao [School of Science, Hubei University of Automotive Technology, Shiyan Hubei 442002 (China); Yu, Zheyin [Institute for Superconducting and Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Liu, Guodong, E-mail: gdliu1978@126.com [School of Material Sciences and Engineering, Hebei University of Technology, Tianjin 300130 (China)

2016-08-15

Plane-wave pseudo-potential methods based on density functional theory are employed to investigate the electronic structures, magnetic properties of newly designed DO{sub 3}-type XO{sub 3} (X=Li, Na, K and Rb) compounds. Result shows they are d{sup 0} HM ferromagnets with total magnetic moment of 5.00 μ{sub B}. Importantly, the d{sup 0} HM characteristic is originated from the polarization of the p-orbitals of O atoms in these hypothetical compounds. The structure stability in the aspects of cohesion energy and formation energy of these four compounds have been tested. The spin-flip gaps of the four XO{sub 3} compounds are quite large (>1.00 eV). Furthermore, the d{sup 0} HM behavior can be maintained in a wide range of lattice constants. - Highlights: • In an attempt to combine the properties of DO{sub 3}-type and d{sup 0} HMFs, XO{sub 3} have been designed. • The electronic structures and magnetism of the XO{sub 3} have been studied. • The effect of uniform strain on the spin polarization ratio have been tested. • The origin of the d{sup 0} HM character have been explained. • Total energy calculation and structure stability have been performed.

Magneto- to electroactive transmutation of spin waves in ErMnO3.

Science.gov (United States)

Chaix, L; de Brion, S; Petit, S; Ballou, R; Regnault, L-P; Ollivier, J; Brubach, J-B; Roy, P; Debray, J; Lejay, P; Cano, A; Ressouche, E; Simonet, V

2014-04-04

The low-energy dynamical properties of the multiferroic hexagonal perovskite ErMnO3 have been studied by inelastic neutron scattering as well as terahertz and far infrared spectroscopies on a synchrotron source. From these complementary techniques, we have determined the magnon and crystal field spectra and identified a zone center magnon excitable only by the electric field of an electromagnetic wave. Using a comparison with the isostructural YMnO3 compound and crystal field calculations, we propose that this dynamical magnetoelectric process is due to the hybridization of a magnon with an electroactive crystal field transition.

Magnetic structure of post-perovskite compound CaIrO3

International Nuclear Information System (INIS)

Ohgushi, Kenya; Ohsumi, Hiroyuki; Yamaura, Jun-ichi; Arima, Taka-hisa

2014-01-01

We have performed resonant X-ray diffraction experiments at the Ir L absorption edges for a post-perovskite compound CaIrO 3 with a Ir 4+ : (t 2g ) 5 electronic configuration. By observing the magnetic signals, we could clearly see that the magnetic structure was a striped ordering with antiferromagnetic moments along the c axis and that the wave function of a t 2g hole is strongly spin-orbit entangled, the J eff = 1/2 state. The observed spin arrangement is consistent with a theoretical work predicting a unique superexchange interaction called the quantum compass model. Our studies stimulate further studies for developing novel quantum states in iridium oxides. (author)

Calorimetric investigations of UPb{sub 3} compound

Energy Technology Data Exchange (ETDEWEB)

Agarwal, Renu, E-mail: arenu@barc.gov.in; Samui, Pradeep; Mukerjee, S.K.

2016-08-10

Highlights: • First time reporting of enthalpy increment and heat capacity data of UPb{sub 3} compound. • First time reporting of high temperature calorimetric determination of enthalpy of formation of UPb{sub 3} compound. • Miedema model was used to calculate enthalpies of formation of UPb{sub 3} and UPb. • Thermodynamic table of the compound UPb{sub 3} was generated. - Abstract: Interaction of uranium based metallic fuels and lead coolant can lead to formation of intermetallic compounds of U-Pb system. To understand U-Pb interactions, it is important to know thermodynamic properties of intermetallic compounds present in this system, UPb{sub 3} and UPb. In the present work, enthalpy increment, heat capacity and enthalpy of formation of UPb{sub 3} intermetallic compound were determined. The enthalpy increment was determined by high temperature Calvet calorimeter and heat capacity was determined using DSC. The heat capacity data was used to calculate thermodynamic parameters of the compound as a function of temperature. The enthalpy of formation at 843 K was determined using successive precipitation method, by direct reaction calorimetry. The enthalpy of formation at 843 K, from Pb(l) and U(l), was −28.9 kJ at-mol{sup −1} and after adjusting enthalpy increments of pure elements and compound, the enthalpy of formation of the compound at 298 K, from Pb(s) and U(α) was found to be −20.0 kJ at-mol{sup −1}.

Thermal conductivity of REIn3 compounds

International Nuclear Information System (INIS)

Mucha, J

2006-01-01

The results of measurements of the thermal conductivity of REIn 3 (RE Pr, Nd, Dy, Ho, Tm) compounds as a function of the temperature in the interval 4-300 K in the absence and in the presence of an external magnetic field of 8 T are presented. Except for PRIn 3 all the compounds are antiferromagnetic. YIn 3 was also measured as a reference compound. The results were analysed in the paramagnetic phase, where an influence of the crystalline electric field on the thermal conductivity was found. Drastic changes in the thermal conductivity were observed and analysed in the vicinity of the Neel temperature and in the antiferromagnetic phases of the compounds. Below the Neel temperature an additional magnon contribution to the thermal conductivity was separated out

Superconductivity in Ti3P-type compounds

International Nuclear Information System (INIS)

Wills, J.O.; Hein, R.A.; Waterstrat, R.M.

1978-01-01

A study of 12 intermetallic A 3 B compounds which crsytallize in the tetragonal Ti 3 P-type structure has revealed five new superconductors with transition temperatures below 1 K: Zr 3 Si, Zr 3 Ge, Zr 3 P, V 3 P, and Nb 3 Ge (extrapolated from the alloy series Nb-Ge-As). In addition, two compounds, Zr 3 Sb and Ta 3 Ge, having the Ni 3 P structure type are found to be superconducting below 1 K. Within the Ti 3 P-type compounds, those with the lighter ''B'' elements in a given column of the Periodic Table have the higher transition temperatures. Critical-magnetic-field and electrical-resistivity data are reported for the superconducting Ti 2 P-type compound Nb 3 P, which permit one to estimate the Ginzburg-Landau kappa parameter and the electronic-specific-heat coefficient γ. The kappa value of 8.4 indicates that this material is type II, and the γ value of 1.3 mJ/mole K 2 for Nb 3 P is probably related to its low transition temperature relative to many A15 compounds

Numerical Simulation of 3-D Wave Crests

Institute of Scientific and Technical Information of China (English)

YU Dingyong; ZHANG Hanyuan

2003-01-01

A clear definition of 3-D wave crest and a description of the procedures to detect the boundary of wave crest are presented in the paper. By using random wave theory and directional wave spectrum, a MATLAB-platformed program is designed to simulate random wave crests for various directional spectral conditions in deep water. Statistics of wave crests with different directional spreading parameters and different directional functions are obtained and discussed.

Acoustic wave propagation in Ni3 R (R = Mo, Nb, Ta) compounds

Indian Academy of Sciences (India)

tile and stable, and contains few defects in the crystal structure in comparison to other compounds. 4. Conclusions. Based on the above discussion it is worthwhile to state that. • Present method to evaluate second-order elastic constants involving many- body interaction potential for hexagonal wurtzite crystal structured ...

Ultrafast dynamics in CeTe{sub 3} near the pressure-induced charge-density-wave transition

Energy Technology Data Exchange (ETDEWEB)

Tauch, Jonas; Obergfell, Manuel [Department of Physics and Center for Applied Photonics, University of Konstanz (Germany); Schaefer, Hanjo [Department of Physics and Center for Applied Photonics, University of Konstanz (Germany); Institute of Physics, Ilmenau University of Technology (Germany); Demsar, Jure [Department of Physics and Center for Applied Photonics, University of Konstanz (Germany); Institute of Physics, Ilmenau University of Technology (Germany); Institute of Physics, Johannes Gutenberg-University Mainz (Germany); Giraldo, Paula; Fisher, Ian R. [Geballe Laboratory for Advanced Materials and Department of Applied Physics, Stanford University (United States); Pashkin, Alexej [Department of Physics and Center for Applied Photonics, University of Konstanz (Germany); Helmholtz-Zentrum Dresden-Rossendorf (Germany)

2015-07-01

Femtosecond pump-probe spectroscopy is an efficient tool for studying ultrafast dynamics in strongly correlated electronic systems, in particular, compounds with a charge-density-wave (CDW) order. Application of external pressure often leads to a suppression of a CDW state due to an impairment of the Fermi surface nesting. We combine time-resolved optical spectroscopy and diamond anvil cell technology to study electron and lattice dynamics in tri-telluride compound CeTe{sub 3}. Around pressures of 4 GPa we observe a gradual vanishing of the relaxation process related to the recombination of the photoexcited quasiparticles. The coherent oscillations of the phonon modes coupled to the CDW order parameter demonstrate even more dramatic suppression with increasing pressure. These observations clearly indicate a transition into the metallic state of CeTe{sub 3} induced by the external pressure.

Theoretical simulations of the structural stabilities, elastic, thermodynamic and electronic properties of Pt3Sc and Pt3Y compounds

Science.gov (United States)

Boulechfar, R.; Khenioui, Y.; Drablia, S.; Meradji, H.; Abu-Jafar, M.; Omran, S. Bin; Khenata, R.; Ghemid, S.

2018-05-01

Ab-initio calculations based on density functional theory have been performed to study the structural, electronic, thermodynamic and mechanical properties of intermetallic compounds Pt3Sc and Pt3Y using the full-potential linearized augmented plane wave(FP-LAPW) method. The total energy calculations performed for L12, D022 and D024 structures confirm the experimental phase stability. Using the generalized gradient approximation (GGA), the values of enthalpies formation are -1.23 eV/atom and -1.18 eV/atom for Pt3Sc and Pt3Y, respectively. The densities of states (DOS) spectra show the existence of a pseudo-gap at the Fermi level for both compounds which indicate the strong spd hybridization and directing covalent bonding. Furthermore, the density of states at the Fermi level N(EF), the electronic specific heat coefficient (γele) and the number of bonding electrons per atom are predicted in addition to the elastic constants (C11, C12 and C44). The shear modulus (GH), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), ratio of B/GH and Cauchy pressure (C12-C44) are also estimated. These parameters show that the Pt3Sc and Pt3Y are ductile compounds. The thermodynamic properties were calculated using the quasi-harmonic Debye model to account for their lattice vibrations. In addition, the influence of the temperature and pressure was analyzed on the heat capacities (Cp and Cv), thermal expansion coefficient (α), Debye temperature (θD) and Grüneisen parameter (γ).

Towards the Detection of Explosive Taggants: Microwave and Millimetre-Wave Gas-Phase Spectroscopies of 3-Nitrotoluene.

Science.gov (United States)

Roucou, Anthony; Kleiner, Isabelle; Goubet, Manuel; Bteich, Sabath; Mouret, Gael; Bocquet, Robin; Hindle, Francis; Meerts, W Leo; Cuisset, Arnaud

2018-01-12

The monitoring of gas-phase mononitrotoluenes is crucial for defence, civil security and environmental interests because they are used as taggant for TNT detection and in the manufacturing of industrial compounds such as dyestuffs. In this study, we have succeeded to measure and analyse at high-resolution a room temperature rotationally resolved millimetre-wave spectrum of meta-nitrotoluene (3-NT). Experimental and theoretical difficulties have been overcome, in particular, those related to the low vapour pressure of 3-NT and to the presence of a CH 3 internal rotation in an almost free rotation regime (V 3 =6.7659(24) cm -1 ). Rotational spectra have been recorded in the microwave and millimetre-wave ranges using a supersonic jet Fourier Transform microwave spectrometer (T rot <10 K) and a millimetre-wave frequency multiplication chain (T=293 K), respectively. Spectral analysis of pure rotation lines in the vibrational ground state and in the first torsional excited state supported by quantum chemistry calculations permits the rotational energy of the molecule, the hyperfine structure due to the 14 N nucleus, and the internal rotation of the methyl group to be characterised. A line list is provided for future in situ detection. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Correlated waves of actin filaments and PIP3 in Dictyostelium cells.

Science.gov (United States)

Asano, Yukako; Nagasaki, Akira; Uyeda, Taro Q P

2008-12-01

Chemotaxis-deficient amiB-null mutant Dictyostelium cells show two distinct movements: (1) they extend protrusions randomly without net displacements; (2) they migrate persistently and unidirectionally in a keratocyte-like manner. Here, we monitored the intracellular distribution of phosphatidylinositol (3,4,5)-trisphosphate (PIP(3)) to gain insight into roles PIP(3) plays in those spontaneous motilities. In keratocyte-like cells, PIP(3) showed convex distribution over the basal membrane, with no anterior enrichment. In stalled cells, as well as in wild type cells, PIP(3) repeated wave-like changes, including emergence, expansion and disappearance, on the basal membrane. The waves induced lamellipodia when they approached the cell edge, and the advancing speed of the waves was comparable to the migration speed of the keratocyte-like cells. LY294002, an inhibitor of PI3 kinase, abolished PIP(3) waves in stalled cells and stopped keratocyte-like cells. These results together suggested that keratocyte-like cells are "surfing" on the PIP(3) waves by coupling steady lamellipodial protrusions to the PIP(3) waves. Simultaneous live observation of actin filaments and PIP(3) in wild type or stalled amiB(-) cells indicated that the PIP(3) waves were correlated with wave-like distributions of actin filaments. Most notably, PIP(3) waves often followed actin waves, suggesting that PIP(3) induces local depolymerization of actin filaments. Consistent with this idea, cortical accumulation of PIP(3) was often correlated with local retraction of the periphery. We propose that the waves of PIP(3) and actin filaments are loosely coupled with each other and play important roles in generating spontaneous cell polarity. Copyright 2008 Wiley-Liss, Inc.

3D Guided Wave Motion Analysis on Laminated Composites

Science.gov (United States)

Tian, Zhenhua; Leckey, Cara; Yu, Lingyu

2013-01-01

Ultrasonic guided waves have proved useful for structural health monitoring (SHM) and nondestructive evaluation (NDE) due to their ability to propagate long distances with less energy loss compared to bulk waves and due to their sensitivity to small defects in the structure. Analysis of actively transmitted ultrasonic signals has long been used to detect and assess damage. However, there remain many challenging tasks for guided wave based SHM due to the complexity involved with propagating guided waves, especially in the case of composite materials. The multimodal nature of the ultrasonic guided waves complicates the related damage analysis. This paper presents results from parallel 3D elastodynamic finite integration technique (EFIT) simulations used to acquire 3D wave motion in the subject laminated carbon fiber reinforced polymer composites. The acquired 3D wave motion is then analyzed by frequency-wavenumber analysis to study the wave propagation and interaction in the composite laminate. The frequency-wavenumber analysis enables the study of individual modes and visualization of mode conversion. Delamination damage has been incorporated into the EFIT model to generate "damaged" data. The potential for damage detection in laminated composites is discussed in the end.

Light reflection from a rough liquid surface including wind-wave effects in a scattering atmosphere

International Nuclear Information System (INIS)

Salinas, Santo V.; Liew, S.C.

2007-01-01

Visible and near-IR images of the ocean surface, taken from remote satellites, often contain important information of near-surface or sub-surface processes, which occur on, or over the ocean. Remote measurements of near surface winds, sea surface temperature and salinity, ocean color and underwater bathymetry, all, one way or another, depend on how well we understand sea surface roughness. However, in order to extract useful information from our remote measurements, we need to construct accurate models of the transfer of solar radiation inside the atmosphere as well as, its reflection from the sea surface. To approach this problem, we numerically solve the radiative transfer equation (RTE) by implementing a model for the atmosphere-ocean system. A one-dimensional atmospheric radiation model is solved via the widely known doubling and adding method and the ocean body is treated as a boundary condition to the problem. The ocean surface is modeled as a rough liquid surface which includes wind interaction and wave states, such as wave age. The model can have possible applications to the retrieval of wind and wave states, such as wave age, near a Sun glint region

Stress Wave attenuation in SiC3D/Al Composite

International Nuclear Information System (INIS)

Yuan Chunyuan; Wang Yangwei; Li Guoju; Zhang Xu; Gao Jubin

2013-01-01

SiC 3D /Al composite is a kind of special composite with interpenetrating network microstructure. The attenuation properties of stress wave propagation along the SiC 3D /Al composite are studied by a Split Hopkinson Pressure Bar system and FEM simulations, and the attenuation mechanism is discussed in this paper. Results show that the attenuation rate of the stress wave in the composite is up to 1.73MPa·mm −1 . The reduction of the amplitude of waves is caused by that plenty of interfaces between SiC and Al within the composite acting with stress waves. When the incident plane wave reaches the SiC 3D /Al interface, reflection wave and transmission wave propagates in different directions along the irregular interface between SiC phase and aluminium phase due to the impedance mismatch of them, which leads to the divergence of stress wave. At the same time, some stress micro-focuses occurs in the aluminium phase for the complex wave superimposition, and some plastic deformation may take place within such micro-regions, which results in the consumption of stress wave energy. In conclusion, the stress wave attenuation is derived from divergence and consumption of stress wave.

Heavy fermion Ce3Co4Sn13 compound under pressure

International Nuclear Information System (INIS)

Collave, J. R.; Borges, H. A.; Ramos, S. M.; Hering, E. N.; Fontes, M. B.; Baggio-Saitovitch, E.; Bittar, E. M.; Mendonça-Ferreira, L.; Pagliuso, P. G.

2015-01-01

The non-magnetic heavy fermion compound Ce 3 Co 4 Sn 13 was studied under pressure. We report single crystalline measurements of electrical resistivity as a function of temperature ρ(T) under pressure. Some characteristic features related to a structural transition (T S ), crystalline field effects (T CEF ), and a low temperature maximum (T max ), possibly connected simultaneously to the onset of Kondo lattice coherence and short range magnetic correlations, were identified in the ρ(T) data. A pressure-temperature phase diagram with T S and T max was constructed by mapping these features. Like for most Ce-based heavy fermion compounds, T max moves to higher temperatures with pressure, indicating that it is related to the Kondo energy scale, due to the increase of hybridization induced by pressure. On the other hand, T S , associated to a superlattice distortion and probably combined with a charge density wave transition, decreases as a function of pressure. However, differently from the Sr 3−x Ca x Ir 4 Sn 13 system, where a superlattice quantum phase transition is observed [L. E. Klintberg et al., Phys. Rev. Lett. 109, 237 008 (2012)], in Ce 3 Co 4 Sn 13 T S  ∼ 154 K, at ambient pressure (P = 0), seems to stabilize at around 143 K for P ≥ 19 kilobars. We also investigated ρ(T) in external magnetic fields, at P = 0. Negative magnetoresistance and increase of T max are observed, suggesting suppression of low temperature short range magnetic correlations

3D plane-wave least-squares Kirchhoff migration

KAUST Repository

Wang, Xin

2014-08-05

A three dimensional least-squares Kirchhoff migration (LSM) is developed in the prestack plane-wave domain to increase the quality of migration images and the computational efficiency. Due to the limitation of current 3D marine acquisition geometries, a cylindrical-wave encoding is adopted for the narrow azimuth streamer data. To account for the mispositioning of reflectors due to errors in the velocity model, a regularized LSM is devised so that each plane-wave or cylindrical-wave gather gives rise to an individual migration image, and a regularization term is included to encourage the similarities between the migration images of similar encoding schemes. Both synthetic and field results show that: 1) plane-wave or cylindrical-wave encoding LSM can achieve both computational and IO saving, compared to shot-domain LSM, however, plane-wave LSM is still about 5 times more expensive than plane-wave migration; 2) the regularized LSM is more robust compared to LSM with one reflectivity model common for all the plane-wave or cylindrical-wave gathers.

Metabolic consequences of resistive-type exercise

Science.gov (United States)

Dudley, G. A.

1988-01-01

This brief review concerns acute and chronic metabolic responses to resistive-type exercise (RTE) (i.e., Olympic/power weight lifting and bodybuilding). Performance of RTE presents power output substantially greater (10-15-fold) than that evident with endurance-type exercise. Accordingly, RTE relies heavily on the anaerobic enzyme machinery of skeletal muscle for energy supply, with alterations in the rate of aerobic metabolism being modest. Hydrolysis of high energy phosphate compounds (PC, ATP), glycogenolysis, and glycolysis are evident during an acute bout of RTE as indicated by metabolic markers in mixed fiber type skeletal muscle samples. The type of RTE probably influences the magnitude of these responses since the increase in blood lactate is much greater during a typical "bodybuilding" than "power lifting" session. The influence of RTE training on acute metabolic responses to RTE has received little attention. An individual's inherent metabolic characteristics are apparently sufficient to meet the energy demands of RTE as training of this type does not increase VO2max or substantially alter the content of marker enzymes in mixed fiber type skeletal muscle. Analyses of pools of fast- vs slow-twitch fibers, however, indicate that RTE-induced changes may be fiber type specific. Future studies should better delineate the metabolic responses to RTE and determine whether these are related to the enhanced performance associated with such training.

Neutron scattering study on R2PdSi3 (R=Ho,Er,Tm) compounds

International Nuclear Information System (INIS)

Tang, Fei

2010-01-01

Previous studies on the family of inter-metallic rare-earth compounds R 2 PdSi 3 revealed multifaceted magnetic properties, for instance, spin-glass like behavior. Experimental observations include: Signs of a crystallographic superstructure, complicated magnetic structures both in zero field and in applied magnetic fields as well as a generic phase in applied fields for compounds in the series with the heavy rare-earths R=Gd, Tb, Dy, Ho, Er and Tm. This thesis expands the studies on the magnetic properties of R 2 PdSi 3 employing mainly neutron scattering on single crystals with the focus on the compounds with R=Ho, Er and Tm. A detailed analysis of the crystallographic superstructure using modulation wave approach and group theory is presented. The resulting structure implies the existence of two different rare-earth sites with reduced symmetry and an arrangement of the different sites according to sequences as determined by the superstructure. It is shown that the reduced symmetry of the rare-earth sites is explicitly observed in the energy spectra of inelastic neutron scattering. The results on the magnetic structures and excitations are shown and discussed in the framework of the superstructure model. Specifically the generic phase in applied fields is interpreted as a direct consequence of the crystallographic superstructure. It is rather unusual that a crystallographic superstructure is playing such a decisive, and through the field dependence also tunable role in determining the magnetic properties as observed in R 2 PdSi 3 . The mediating interactions between the crystallographic part and the magnetic part of the system are discussed. (orig.)

Nonparametric estimation of the heterogeneity of a random medium using compound Poisson process modeling of wave multiple scattering.

Science.gov (United States)

Le Bihan, Nicolas; Margerin, Ludovic

2009-07-01

In this paper, we present a nonparametric method to estimate the heterogeneity of a random medium from the angular distribution of intensity of waves transmitted through a slab of random material. Our approach is based on the modeling of forward multiple scattering using compound Poisson processes on compact Lie groups. The estimation technique is validated through numerical simulations based on radiative transfer theory.

Structural, electronic, optical and thermodynamic properties of cubic REGa{sub 3} (RE = Sc or Lu) compounds: Ab initio study

Energy Technology Data Exchange (ETDEWEB)

Murtaza, G., E-mail: murtaza@icp.edu.pk [Materials Modeling Laboratory, Department of Physics, Islamia College Peshawar (Pakistan); Gupta, S.K. [Department of Physics, Michigan Technological University, Houghton, MI 49931 (United States); Seddik, T. [Laboratoire de Physique Quantique et de Modélisation Mathématique, Université de Mascara, 29000 Mascara (Algeria); Khenata, R., E-mail: khenata_rabah@yahoo.fr [Laboratoire de Physique Quantique et de Modélisation Mathématique, Université de Mascara, 29000 Mascara (Algeria); Alahmed, Z.A. [Department of Physics and Astronomy, College of Science, King Saud University, Riyadh 11451 (Saudi Arabia); Ahmed, R. [Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor (Malaysia); Khachai, H. [Physics Department, Djillali Liabes University of Sidi Bel-Abbes (Algeria); Jha, P.K. [Department of Physics, Maharaja Krishnakumarsinhji Bhavnagar University, Bhavnagar 364001 (India); Bin Omran, S. [Department of Physics and Astronomy, College of Science, King Saud University, Riyadh 11451 (Saudi Arabia)

2014-06-01

Highlights: • REGa{sub 3} (RE = Sc or Lu) compounds are mechanical stabile. • Both ScGa{sub 3} and LuGa{sub 3} exhibit metallic behavior just like other REGa{sub 3} compounds. • Melting temperature T{sub m} (K) for ScGa{sub 3} and LuGa{sub 3} are 1244.2 and 1143.8. • High absorption observed in the visible energy region. • The present study would be helpful for future experimental/theoretical explorations. - Abstract: Structural, elastic, optoelectronic and thermodynamic properties of REGa{sub 3} (RE = Sc and Lu) compounds have been studied self consistently by employing state of the art full potential (FP) linearized (L) approach of augmented plane wave (APW) plus local orbitals method. Calculations were executed at the level of Perdew–Burke and Ernzerhof (PBE) parameterized generalized gradient approximation (GGA) for exchange correlation functional in addition to modified Becke–Johnson (mBJ) potential. Our obtained results of lattice parameters show reasonable agreement to the previously reported experimental and other theoretical studies. Analysis of the calculated band structure of ScGa{sub 3} and LuGa{sub 3} compounds demonstrates their metallic character. Moreover, a positive value of calculated Cauchy pressure, in addition to reflecting their ductile nature, endorses their metallic character as well. To understand optical behavior calculations related to the important optical parameters; real and imaginary parts of the dielectric function, reflectivity R(ω), refractive index n(ω) and electron energy-loss function L(ω) have also been performed. In the present work, thermodynamically properties are also investigated by employing lattice vibrations integrated in quasi harmonic Debye model. Obtained results of volume, heat capacity and Debye temperature as a function of temperature for both compounds, at different values of pressure, are found to be consistent. The calculated value of melting temperature for both compounds (ScGa{sub 3} and Lu

Overview of ultraviolet and infrared spectroscopic properties of Yb3+ doped borate and oxy-borates compounds

International Nuclear Information System (INIS)

Sablayrolles, J.

2006-12-01

The trivalent ytterbium ion can give rise to two emissions with different spectroscopic properties: the first one, with a short lifetime, in the ultraviolet (charge transfer emission) is used in detectors such as scintillators, and the other one, with a long lifetime, in the infrared (4f-4f emission) for laser applications. The strong link between material structure and properties is illustrated through ytterbium luminescence study, in the ultraviolet and infrared, inserted in the borate Li 6 Y(BO 3 ) 3 and two oxy-borates: LiY 6 O 5 (BO 3 ) 3 and Y 17,33 B 8 O 38 . For the first time an ytterbium charge transfer emission in oxy-borates has been observed. The calculation of the single configurational coordinate diagram, as well as the thermal quenching, has been conducted under a fundamental approach on the ytterbium - oxygen bond. The study of the ytterbium infrared spectroscopy in these compounds has been realised and an energy level attribution is proposed in the particular case of the borate Li 6 Y(BO 3 ) 3 : Yb 3+ . An original approach is introduced with the study of the charge transfer states for the three compounds by looking at the infrared emission. The first laser performances in three operating modes (continuous wave, Q-switch and mode locking) of a Li 6 Y(BO 3 ) 3 : Yb 3+ crystal are reported. (author)

Subsurface Profile Mapping using 3-D Compressive Wave Imaging

Directory of Open Access Journals (Sweden)

Hazreek Z A M

2017-01-01

Full Text Available Geotechnical site investigation related to subsurface profile mapping was commonly performed to provide valuable data for design and construction stage based on conventional drilling techniques. From past experience, drilling techniques particularly using borehole method suffer from limitations related to expensive, time consuming and limited data coverage. Hence, this study performs subsurface profile mapping using 3-D compressive wave imaging in order to minimize those conventional method constraints. Field measurement and data analysis of compressive wave (p-wave, vp was performed using seismic refraction survey (ABEM Terraloc MK 8, 7 kg of sledgehammer and 24 units of vertical geophone and OPTIM (SeisOpt@Picker & SeisOpt@2D software respectively. Then, 3-D compressive wave distribution of subsurface studied was obtained using analysis of SURFER software. Based on 3-D compressive wave image analyzed, it was found that subsurface profile studied consist of three main layers representing top soil (vp = 376 – 600 m/s, weathered material (vp = 900 – 2600 m/s and bedrock (vp > 3000 m/s. Thickness of each layer was varied from 0 – 2 m (first layer, 2 – 20 m (second layer and 20 m and over (third layer. Moreover, groundwater (vp = 1400 – 1600 m/s starts to be detected at 2.0 m depth from ground surface. This study has demonstrated that geotechnical site investigation data related to subsurface profiling was applicable to be obtained using 3-D compressive wave imaging. Furthermore, 3-D compressive wave imaging was performed based on non destructive principle in ground exploration thus consider economic, less time, large data coverage and sustainable to our environment.

Coordinate asymptotics of the (3→3) wave functions for a three charged particle system

International Nuclear Information System (INIS)

Merkur'ev, S.P.

1977-01-01

Coordinate asymptotics of the (3 → 3) wave functions for three particles system with Coulomb interaction in the scattering problem is plotted. (3 → 3) and (3 → 2) process cases are considered, when the particles are not connected at the initial state. For coordinate asymptotics plotting the basis functions are used which meet Schroedinger equation in the eikonal approximation. The wave functions coordinate asymptotics plotting method is described far from special directions. Wave function asymptotical form is studied in the range of special directions and (3 → 3) scattering amplitude singularities are described. All data are given in accordance with the system with 2 charged particles only. The model in question is of special interest because of the described ppn system the studying of which is of great importance in nuclear physics. Final formulae are discussed for the most general case of three charged particles. Boundary problems for Schroedinger equation are shown to give the only way of definition for the (3 → 3) wave functions. It is pointed out that in special directions wave function coordinate asymptotics is presented with accuracy that gives the possibility to set such a boundary problem

Revealing Extremely Low Energy Amplitude Modes in the Charge-Density-Wave Compound LaAgSb_{2}.

Science.gov (United States)

Chen, R Y; Zhang, S J; Zhang, M Y; Dong, T; Wang, N L

2017-03-10

Using infrared spectroscopy and ultrafast pump probe measurement, we have studied the two charge-density-wave (CDW) instabilities in the layered compound LaAgSb_{2}. The development of CDW energy gaps was clearly observed by optical spectroscopy, which removed most of the free carrier spectral weight. More interestingly, our time-resolved measurements revealed two coherent oscillations that softened by approaching the two phase transition temperatures, respectively. We addressed that these two oscillations come from the amplitude modes of CDW collective excitations, the surprisingly low energies (0.12 THz and 0.34 THz for the higher and lower temperature ones, respectively) of which are associated with the extremely small nesting wave vectors. Additionally, the amplitude and relaxation time of photoinduced reflectivity of LaAgSb_{2} single crystals stayed unchanged across the CDW phase transitions, which is quite rare and deserves further investigation.

Zonal Wave Number 2 Rossby Wave (3.5-day oscillation) Over The Martian Lower Atmosphere

Science.gov (United States)

Ghosh, P.; Thokuluwa, R. K.

2013-12-01

Over the Mars, height (800-50 Pascal pressure coordinate) profiles of temperature (K), measured by radio occultation technique during the MGS (Mars Global Surveyor) mission, obtained for the period of 1-10 January 2006 at the Martian latitude of ~63N in almost all the longitudes are analyzed to study the characteristics of the 3.5-day oscillation. To avoid significant data gaps in a particular longitude sector, we selected a set of 7 Mars longitude regions with ranges of 0-30E, 35-60E, 65-95E, 190-230E, 250-280E, 290-320E, and 325-360E to study the global characteristics of the 3.5-day oscillation. The 3.5-day oscillation is not selected as a-priori but observed as a most significant oscillation during this period of 1-10 January 2006. It is observed that in the longitude of 0-30E, the 3.5-day oscillation shows statistically significant power (above the 95% confidence level white noise) from the lowest height (800 Pascal, 8 hPa) itself and up to the height of 450 Pascal level with the maximum power of ~130 K^2 at the 600 & 650 Pascal levels. It started to grow from the power of ~ 50 K^2 at the lowest height of 800 Pascal level and reached the maximum power in the height of 600-650 Pascal level and then it started to get lessened monotonously up to the height of 450 Pascal level where its power is ~ 20 K^2. Beyond this height and up to the height of 50 Pascal level, the wave amplitude is below the white noise level. As the phase of the wave is almost constant at all the height levels, it seems that the observed 3.5-day oscillation is a stationary wave with respect to the height. In the 35-60 E longitude sector, the vertical structure of the 3.5-day oscillation is similar to what observed for the 0-30 E longitude region but the power is statistically insignificant at all the heights. However in the 65-95E longitude sector, the wave grows from the lowest level (70 K^2) of 800 Pascal to its maximum power of 280 K^2 in the height of 700 Pascal level and then it started

Dielectronic recombination and resonant transfer excitation processes for helium-like krypton

Institute of Scientific and Technical Information of China (English)

Hu Xiao-Li; Qu Yi-Zhi; Zhang Song-Bin; Zhang Yu

2012-01-01

The relativistic configuration interaction method is employed to calculate the dielectronic recombination (DR) cross sections of helium-like krypton via the 1s21nl' (n =2,3,...,15) resonances.Then,the resonant transfer excitation (RTE) processes of Kr34+ colliding with H,He,H2,and CHx (x =0-4) targets are investigated under the impulse approximation.The needed Compton profiles of targets are obtained from the Hartree-Fock wave functions.The RTE cross sections are strongly dependent on DR resonant energies and strengths,and the electron momentum distributions of the target.For H2 and H targets,the ratio of their RTE cross sections changes from 1.85 for the 1s2121' to 1.88 for other resonances,which demonstrates the weak molecular effects on the Compton profiles of H2.For CHx (x =0-4) targets,the main contribution to the RTE cross section comes from the carbon atom since carbon carries 6 electrons;as the number of hydrogen increases in CHx,the RTE cross section almost increases by the same value,displaying the strong separate atom character for the hydrogen.However,further comparison of the individual orbital contributions of C(2p,2s,ls) and CH4(1t2,2a1,1a1) to the RTE cross sections shows that the molecular effects induce differences of about 25.1％,19.9％,and 0.2％ between 2p-1t2,2s-2a1,and 1s-1a1 orbitals,respectively.

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, C3

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, C3. C3 board number 8215 (not coated) appears as board_id=32, task_id=23. C3 board number 771 (coated) appears...

Investigation of Sm(3) and Eu(3) coordination compounds with pyrazolones by IR spectroscopy method

International Nuclear Information System (INIS)

Panyushkin, V.T.; Grishenko, T.V.; Afanas'ev, Yu.A.; Garnovskij, A.D.; Osipov, O.A.

1978-01-01

The synthesis is described of the coordination nitrate compounds of Sm(3) and Eu(3) with pyrazolones: 4-aminoantipyrine (A), 1-ethylpyridyl- 3-phenyl-pyrazolone-5(B); 1-(3'-ethylpyridyl)-3(phenylamine-n)-pyrazolone-5(C). It has been determined by the infrared spectroscopy method that exocyclic oxygen atom is the place of coordination bond localization in the pentioned compounds. The infrared spectra analysis of complexes in the 1700-1800 cm -1 region makes it possible to mention bidentate character of NO 3 -groups in the studied complex compounds

Evaluation of a gas chromatograph with a novel surface acoustic wave detector (SAW GC) for screening of volatile organic compounds in Hanford waste tank samples

International Nuclear Information System (INIS)

Lockrem, L.L.

1998-01-01

A novel instrument, a gas chromatograph with a Surface Acoustic Wave Detector (SAW GC), was evaluated for the screening of organic compounds in Hanford tank headspace vapors. Calibration data were developed for the most common organic compounds, and the accuracy and precision were measured with a certified standard. The instrument was tested with headspace samples collected from seven Hanford waste tanks

Preparing tomorrow's network today: RTE at the crossroads of the European electricity system. Cross-border electricity interconnections Key issues and figures - 2014 Edition

International Nuclear Information System (INIS)

2014-10-01

The interconnected electricity transmission network is a key element for ensuring security of supply, the creation of a single market and the integration of renewable energies. RTE and its European partners provide strengthened coordination by the use of interconnections to ensure solidarity between European countries. Interconnections also allow an electricity supplier to sell its energy to a customer located in another country in Europe. They contribute on a European scale to optimising the use of production means and in particular the integration of variable renewable energies. RTE, within the EnTSo-E (European Network of Transmission System Operators for Electricity), contributes to the publication of a common vision of the future of networks by 2030. The needs for new interconnection capacity are identified in the ten-year European network development plan (TYnDP) on the basis of a cost-benefit analysis. France is interconnected to all its neighbours via many cross-border links. However interconnection capacity with the various countries and its use differ widely. The usage profile of the interconnections is specific to each border and varies according to: - the characteristics of the production mix of each country, and in particular the level of production of renewable energies. - the level of consumption, which depends on the season, the type of day (working or non-working) the time of day, etc. - import and export capacity, which may be different depending on the internal constraints of the networks of each country

Development of a Surface Acoustic Wave Sensor for In-Situ Monitoring of Volatile Organic Compounds

Directory of Open Access Journals (Sweden)

Jerome L. Wright

2003-07-01

Full Text Available This paper describes the development of a surface-acoustic-wave (SAW sensor that is designed to be operated continuously and in situ to detect volatile organic compounds. A ruggedized stainless-steel package that encases the SAW device and integrated circuit board allows the sensor to be deployed in a variety of media including air, soil, and even water. Polymers were optimized and chosen based on their response to chlorinated aliphatic hydrocarbons (e.g., trichloroethylene, which are common groundwater contaminants. Initial testing indicates that a running-average data-logging algorithm can reduce the noise and increase the sensitivity of the in-situ sensor.

Low-temperature specific heat of the quasi-two-dimensional charge-density wave compound KMo6O17

Science.gov (United States)

Wang, Junfeng; Xiong, Rui; Yin, Di; Li, Changzhen; Tang, Zheng; Wang, Ququan; Shi, Jing; Wang, Yue; Wen, Haihu

2006-05-01

Low temperature specific heat (Cp) of quasi-two-dimensional charge-density wave (CDW) compound KMo6O17 has been studied by a relaxation method from 2to48K under zero and 12T magnetic fields. The results show that no specific heat anomaly is found at 16K under both zero and 12T magnetic fields, although an anomaly is clearly observed in the resistivity and magnetoresistance measurements. From the data between 2 and 4K , the density of states at Fermi level is estimated as 0.2eV-1permolecule and the Debye temperature is extracted to be 418K . A bump appearing in Cp/T3 is found between 4 and 48K centered around 12.5-15K , indicating that the phason excitations contribute to the total specific heat similarly as in quasi-one-dimensional CDW conductors. Using a modified Debye model, a pinning frequency of 0.73THz for KMo6O17 is estimated from the phason contribution.

Electronic structure of SnF{sub 3}: An example of valence skipper which forms charge density wave

Energy Technology Data Exchange (ETDEWEB)

Hase, I., E-mail: i.hase@aist.go.jp [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8568 (Japan); Yanagisawa, T. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8568 (Japan); Kawashima, K. [IMRA Material R& D Co., LTD., Kariya, Aichi 448-0032 (Japan)

2016-11-15

Highlights: • We calculated the electronic structure of SnF{sub 3} and BaBiO{sub 3} from first principles. • As for SnF{sub 3}, charge-density-wave (CDW) is found, which agrees with the experiment. • As for BaBiO{sub 3}, CDW is not found, contrary to the experiment. • We conclude that the CDW is hard in SnF{sub 3} and is soft in BaBiO{sub 3}. - Abstract: In the present study we calculated the electronic structure of the valence skipping compound SnF{sub 3} and BaBiO{sub 3} from first-principles. We confirmed that the charge-density-wave (CDW) is formed in SnF{sub 3}, and the Sn atoms in two crystallographic different sites take the valence Sn{sup 2+} and Sn{sup 4+}. Structure optimization study reveals that this CDW is stable, though the atomic position is slightly different from the experimental data. This behavior is in contrast with the case of BaBiO{sub 3}, where the structure optimization leads to the uniform state, which means that two Bi sites are equivalent. The CDW state is hard in SnF{sub 3}, which means that the CDW gap is large enough and it is difficult to melt this CDW order.

3D Modeling of Ultrasonic Wave Interaction with Disbonds and Weak Bonds

Science.gov (United States)

Leckey, C.; Hinders, M.

2011-01-01

Ultrasonic techniques, such as the use of guided waves, can be ideal for finding damage in the plate and pipe-like structures used in aerospace applications. However, the interaction of waves with real flaw types and geometries can lead to experimental signals that are difficult to interpret. 3-dimensional (3D) elastic wave simulations can be a powerful tool in understanding the complicated wave scattering involved in flaw detection and for optimizing experimental techniques. We have developed and implemented parallel 3D elastodynamic finite integration technique (3D EFIT) code to investigate Lamb wave scattering from realistic flaws. This paper discusses simulation results for an aluminum-aluminum diffusion disbond and an aluminum-epoxy disbond and compares results from the disbond case to the common artificial flaw type of a flat-bottom hole. The paper also discusses the potential for extending the 3D EFIT equations to incorporate physics-based weak bond models for simulating wave scattering from weak adhesive bonds.

Effects of high hydrostatic pressure and varying concentrations of sodium nitrite from traditional and vegetable-based sources on the growth of Listeria monocytogenes on ready-to-eat (RTE) sliced ham.

Science.gov (United States)

Myers, Kevin; Cannon, Jerry; Montoya, Damian; Dickson, James; Lonergan, Steven; Sebranek, Joseph

2013-05-01

The objective of this study was to determine the effect the source of added nitrite and high hydrostatic pressure (HHP) had on the growth of Listeria monocytogenes on ready-to-eat (RTE) sliced ham. Use of 600MPa HHP for 3min resulted in an immediate 3.9-4.3log CFU/g reduction in L. monocytogenes numbers, while use of 400MPa HHP (3min) provided less than 1log CFU/g reduction. With the 600MPa HHP treatment, sliced ham with a conventional concentration of sodium nitrite (200ppm) was not different in L. monocytogenes growth from use with 50 or 100ppm of sodium nitrite in pre-converted celery powder. Instrumental color values as well as residual nitrite and residual nitrate concentrations for cured (sodium nitrite and nitrite from celery powder) and uncured ham formulations are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Nucleon-nucleon interaction in the quark-compound-bag model

International Nuclear Information System (INIS)

Simonov, Yu.A.

1982-01-01

The NN potential is investigated in the framework of the quark-compound-bag model. The cluster decomposition of the total six-quark wave function are obtained. The resulting potential is nonlocal and energy dependent with coefficients which can be derived both phenomenologically and theoretically. Stringent conditions exist for those coefficients. As an example the NN potentials for the 3 S 1 and 1 S 0 states are presented. The properties of the wave functions are studied both in the configurational and momentum space

Different magnetic behaviour of the Kondo compounds Al3Ce and Al11Ce3

International Nuclear Information System (INIS)

Benoit, A.; Flouquet, J.; Palleau, J.; Buevoz, J.L.

1979-08-01

Neutron diffraction experiments on the Al 3 Ce and Al 11 Ce 3 compounds have been performed on the multidetector of the I.L.L. high flux reactor. No magnetic structure has been detected on the Al 3 Ce compound down to 20 mK. This confirms the non magnetic ground state of Al 3 Ce. For Al 11 Ce 3 , two magnetic structures have been observed: a ferromagnetic one at 4.2 K and an antiferromagnetic one at 2 K. The antiferromagnetic structure, which corresponds to a propagation vector (0,0,1/3), implies a strong reduction of the magnetic moment of determined sites; this reflects the Kondo character of the compounds

Thermochemical investigations on intermetallic UMe3 compounds (Me=Ru,Rh,Pd)

International Nuclear Information System (INIS)

Wijbenga, G.

1981-10-01

The subject of this thesis is the determination of the thermodynamic properties of the intermetallic compounds of uranium with the light platinum metals, ruthenium, rhodium and palladium. These intermetallics are formed as very stable compounds during fission in nuclear fuel by the reaction of the fission products Ru, Rh and Pd with the matrix. Methods for the preparation of URu 3 , URh 3 and UPd 3 , experiments showing the chemical reactivities of these compounds, and studies of the stoichiometry of hexagonal UPd 3 by X-ray diffraction of solubility experiments of UN and palladium in UPd 3 , are described. Thermodynamic properties of the UMe 3 compounds have been obtained using several experimental thermodynamic techniques: fluorine bomb calorimetry, low-temperature cryogenic calorimetry, high-temperature drop calorimetry and EMF measurements of reversible cells. (Auth.)

Microsomal cytochrome P450-3A4 (CYP3A4) nanobiosensor for the determination of 2,4-dichlorophenol-An endocrine disruptor compound

International Nuclear Information System (INIS)

Hendricks, Nicolette R.; Waryo, Tesfaye T.; Arotiba, Omotayo; Jahed, Nazeem; Baker, Priscilla G.L.; Iwuoha, Emmanuel I.

2009-01-01

Cytochrome P450-3A4 (CYP3A4) is a monooxygenase enzyme that plays a major role in the detoxification of bioactive compounds and hydrophobic xenobiotics (e.g. medicines, drugs, environmental pollutants, food supplements and steroids). Physiologically the monooxygenation reactions of this class II, microsomal, b-type heme enzyme, usually requires cytochrome P450 reductase, NADPH. A novel CYP3A4 biosensor system that essentially simplified the enzymatic redox processes by allowing electron transfer between the electrode and the enzyme redox centre to occur, without any need for the physiological redox partners, was developed for the detection of 2,4-dichlorophenol (2,4-DCP), a priority environmental pollutant and an endocrine disruptor. The biosensor, GC/Naf-Co(Sep) 3+ /CYP3A4/Naf, was constructed by encapsulating CYP3A4 in a Nafion-cobalt (III) sepulchrate (Naf-Co(Sep) 3+ ) composite film on a glassy carbon (GC) electrode. The responses of the biosensor to 2,4-dichlorophenol, erythromycin (CYP3A4 native substrate) and ketoconazole (CYP 3A4 natural inhibitor) were studied by cyclic and square wave voltammetric techniques. The detection limit (DL) of the biosensor for 2,4-dichlorophenol was 0.043 μg L -1 , which is by an order of magnitude lower than the EU limit (0.3 μg L -1 ) for any pesticide compound in ground water. The biosensor's DL is lower than the U.S. Environmental Protection Agency's drinking water equivalent level (DWEL) value for 2,4-DCP, which is 2 μg L -1

A SAR and QSAR study of new artemisinin compounds with antimalarial activity.

Science.gov (United States)

Santos, Cleydson Breno R; Vieira, Josinete B; Lobato, Cleison C; Hage-Melim, Lorane I S; Souto, Raimundo N P; Lima, Clarissa S; Costa, Elizabeth V M; Brasil, Davi S B; Macêdo, Williams Jorge C; Carvalho, José Carlos T

2013-12-30

The Hartree-Fock method and the 6-31G** basis set were employed to calculate the molecular properties of artemisinin and 20 derivatives with antimalarial activity. Maps of molecular electrostatic potential (MEPs) and molecular docking were used to investigate the interaction between ligands and the receptor (heme). Principal component analysis and hierarchical cluster analysis were employed to select the most important descriptors related to activity. The correlation between biological activity and molecular properties was obtained using the partial least squares and principal component regression methods. The regression PLS and PCR models built in this study were also used to predict the antimalarial activity of 30 new artemisinin compounds with unknown activity. The models obtained showed not only statistical significance but also predictive ability. The significant molecular descriptors related to the compounds with antimalarial activity were the hydration energy (HE), the charge on the O11 oxygen atom (QO11), the torsion angle O1-O2-Fe-N2 (D2) and the maximum rate of R/Sanderson Electronegativity (RTe+). These variables led to a physical and structural explanation of the molecular properties that should be selected for when designing new ligands to be used as antimalarial agents.

[Physical and mechanical properties of the thermosetting resin for crown and bridge cured by micro-wave heating].

Science.gov (United States)

Kaneko, K

1989-09-01

A heating method using micro-waves was utilized to obtain strong thermosetting resin for crown and bridge. The physical and mechanical properties of the thermosetting resin were examined. The resin was cured in a shorter time by the micro-waves heating method than by the conventional heat curing method and the working time was reduced markedly. The base resins of the thermosetting resin for crown and bridge for the micro-waves heating method were 2 PA and diluent 3 G. A compounding volume of 30 wt% for diluent 3 G was considered good the results of compressive strength, bending strength and diametral tensile strength. Grams of 200-230 of the filler compounded to the base resins of 2 PA-3 G system provided optimal compressive strength, bending strength and diametral tensile strength. A filler gram of 230 provided optimal hardness and curing shrinkage rate, the coefficient of thermal expansion became smaller with the increase of the compounding volume of the filler. The trial thermosetting resin for crown and bridge formed by the micro-waves heating method was not inferior to the conventional resin by the heat curing method or the light curing method.

Crystal structure and thermochemical properties of a novel coordination compound sodium pyruvate C3H3O3Na(s)

International Nuclear Information System (INIS)

Gao, Zhen-Fei; Di, You-Ying; Liu, Su-Zhou; Lu, Dong-Fei; Dou, Jian-Min

2014-01-01

Graphical abstract: A novel coordination compound sodium pyruvate C 3 H 3 O 3 Na(s) is synthesised. Elemental analysis and X-ray crystallography are used to characterise the composition and crystal structure of the compound. The lattice potential energy and ionic volume of the anion are obtained from crystallographic data. The standard molar enthalpy of formation of the compound is calculated by an isoperibol solution-reaction calorimeter. Molar enthalpies of dissolution of the compound at various molalities are measured at T = 298.15 K. According to Pitzer’s theory, molar enthalpy of dissolution of the title compound at infinite dilution is calculated. The values of relative apparent molar enthalpies and relative partial molar enthalpies of the solvent and the compound at different concentrations m/(mol · kg −1 ) are derived. - Highlights: • The sodium pyruvate was synthesised and crystal structure was determined. • The enthalpy change of the synthesis reaction was obtained. • Standard molar enthalpy of formation was obtained. • Molar enthalpy of dissolution at infinite dilution was calculated. - Abstract: A novel coordination compound sodium pyruvate C 3 H 3 O 3 Na(s) is synthesised by a liquid phase reaction. The compound has an obvious bioactivity and can be used as the biological carbon source and the chemical identification of primary and secondary alcohols. It can be also used to determinate transaminase. Elemental analysis and X-ray crystallography are used to characterise the composition and crystal structure of the compound. Single crystal X-ray analysis reveals that the compound is formed by one CH 3 COCOO − anion and one Na + cation. An obvious feature of the crystal structure is the formation of the five-membered chelate ring by the coordination of O1 of carboxylate and O3 of keto form with Na + cation, and it is good for the stability of the compound in structure. The lattice potential energy and ionic volume of the anion are obtained

Atomic-resolution studies of In2O3-ZnO compounds on aberration-corrected electron microscopes

International Nuclear Information System (INIS)

Yu, Wentao

2009-01-01

In this work, the characteristic inversion domain microstructures of In 2 O 3 (ZnO) m (m=30) compounds were investigated by TEM methods. At bright-atom contrast condition, atomically resolved HR-TEM images of In 2 O 3 (ZnO) 30 were successfully acquired in [1 anti 100] zone axis of ZnO, with projected metal columns of ∝1.6 A well resolved. From contrast maxima in the TEM images, local lattice distortions at the pyramidal inversion domain boundaries were observed for the first time. Lattice displacements and the strain field in two-dimensions were visualized and measured using the 'DALI' algorithm. Atomically resolved single shot and focal series images of In 2 O 3 (ZnO) 30 were achieved in both zone axes of ZnO, [1 anti 100] and [2 anti 1 anti 10], respectively. The electron waves at the exit-plane were successfully reconstructed using the software package 'TrueImage'. Finally, a three dimensional atomic structure model for the pyramidal IDB was proposed, with an In distribution of 10%, 20%, 40%, 20% and 10% of In contents over 5 atom columns along basal planes, respectively. Through a detailed structural study of In 2 O 3 (ZnO) m compounds by using phase-contrast and Z-contrast imaging at atomic resolution, In 3+ atoms are determined with trigonal bi-pyramidal co-ordination and are distributed at the pyramidal IDBs. (orig.)

Metabolism of metofluthrin in rats: II. Excretion, distribution and amount of metabolites.

Science.gov (United States)

Abe, Jun; Tomigahara, Yoshitaka; Tarui, Hirokazu; Nagahori, Hirohisa; Kurosawa, Motohiro; Sugimoto, Kenji; Isobe, Naohiko

2017-11-20

1. 14  C-Labelled E/Z isomers of a synthetic pyrethroid metofluthrin ((E/Z)-(1 R,3 R)-2,3,5,6-tetrafluoro-4-(methoxymethyl)benzyl 2,2-dimethyl-3-(1-propenyl)-cyclopropanecarboxylate, abbreviated as RTE/RTZ, respectively) were used for rat metabolism studies. 14  C-RTE or RTZ labelled at the carbonyl-carbon [acid- 14 C] or the methoxymethylbenzyl-α-carbon [alcohol- 14  C] was administered orally to rats at 1 and 20 mg/kg. 2. Dosed compounds were mostly absorbed, metabolised, and rapidly excreted. Dose-related increase in blood AUC suggested no saturation of absorption at the high dose. Blood 14  C was maximal at 3-8 h and decreased with a half-life of 52-163 h. Radioactivity in tissues, blood and plasma decreased basically at the same rate and the sum fell below 0.2% of the dose at 168 h. 3. Although the major metabolic pathways of the isomers, that is, ester cleavage, O-demethylation and ω-oxidation, were similar, there was a notable difference. The RTZ double bond commonly undergoes epoxidation while RTE double bond mainly undergoes glutathione conjugation, which causes faster elimination from plasma and greater excretion into faeces on RTE. Faster urinary excretion and elimination from blood were observed for the alcohol moiety than the acid moiety. 4. In conclusion, this study described the overall metabolic profiles of metofluthrin and identified the differences in metabolic breakdown between the isomers. No marked sex-/dose-related differences were observed.

Overlap integrals of model wave functions of 4He and 3He,3H nuclei

International Nuclear Information System (INIS)

Voloshin, N.I.; Levshin, E.B.; Fursa, A.D.

1990-01-01

Overlap integrals of wave functions 4 He nucleus and 3 He and 3 H nuclei are calculated. Two types of model wave functions are used to describe the structure of nuclei. The wace function is taken as a product of the one-particle Gaussian functions of the Gaussian type in the second case

Simulations of drift waves in 3D magnetic configurations

International Nuclear Information System (INIS)

Jost, G.

2000-06-01

Drift waves are commonly held responsible for anomalous transport in tokamak configurations and in particular for the anomalously high heat loss. The next generation of stellarators on the other hand are hoped to be characterized by a much smaller neo-classical transport and by particle confinement close to that of tokamaks. There is nevertheless a strong interest in the stellarator community to study the properties of drift waves in 3D magnetic configurations. To serve this interest we have developed the first global gyrokinetic code, EUTERPE, aimed at the investigation of linear drift wave stability in general toroidal geometry. The physical model assumes electrostatic waves and adiabatic electrons. EUTERPE is a particle-in-cell (PIC) code in which the gyrokinetic Poisson equation is discretized with the finite element method defined in the PEST -1 system of magnetic coordinates. The magnetic geometry is provided by the magnetohydrodynamic (MHD) equilibrium code VMEC. The complete 3D model has been successfully validated in toroidal axisymmetric and straight helical geometries and has permitted the first simulation of unstable global ITG driven modes in non-axisymmetric toroidal configurations. As a first application, two configurations have been studied, the Quasi-Axially symmetric Stellarator with three fields periods (QAS3) currently one system under consideration at the Princeton Plasma Physics Laboratory and the Helically Symmetric experiment (HSX) which has recently started operation at the University of Wisconsin. QAS3 is characterized by a tokamak-Iike field in the outer part of the torus. In this structure the drift waves are mainly affected by the magnetic shear and barely by the shape of the plasma. Also, the results are very close to those obtained for a tokamak. On the other hand, results for the HSX configuration, which is characterized by a dominant helical magnetic field, show a clear 3D effect, namely a strong toroidal variation of the drift wave

High-temperature thermopower of some REIn3 compounds

International Nuclear Information System (INIS)

Kletowski, Z.; Resel, R.

1995-01-01

The temperature dependences of the thermopower of six REIn 3 compounds (RE=La, Pr, Gd, Dy, Er and Lu) were measured in the temperature range up to 1000 K. The observed changes in the slopes of the temperature versus thermopower curves for all the investigated compounds are interpreted as originating from a special shape of the density of states (DOS) near the Fermi energy, E F . ((orig.))

Neutron scattering study on R{sub 2}PdSi{sub 3} (R=Ho,Er,Tm) compounds

Energy Technology Data Exchange (ETDEWEB)

Tang, Fei

2010-12-14

Previous studies on the family of inter-metallic rare-earth compounds R{sub 2}PdSi{sub 3} revealed multifaceted magnetic properties, for instance, spin-glass like behavior. Experimental observations include: Signs of a crystallographic superstructure, complicated magnetic structures both in zero field and in applied magnetic fields as well as a generic phase in applied fields for compounds in the series with the heavy rare-earths R=Gd, Tb, Dy, Ho, Er and Tm. This thesis expands the studies on the magnetic properties of R{sub 2}PdSi{sub 3} employing mainly neutron scattering on single crystals with the focus on the compounds with R=Ho, Er and Tm. A detailed analysis of the crystallographic superstructure using modulation wave approach and group theory is presented. The resulting structure implies the existence of two different rare-earth sites with reduced symmetry and an arrangement of the different sites according to sequences as determined by the superstructure. It is shown that the reduced symmetry of the rare-earth sites is explicitly observed in the energy spectra of inelastic neutron scattering. The results on the magnetic structures and excitations are shown and discussed in the framework of the superstructure model. Specifically the generic phase in applied fields is interpreted as a direct consequence of the crystallographic superstructure. It is rather unusual that a crystallographic superstructure is playing such a decisive, and through the field dependence also tunable role in determining the magnetic properties as observed in R{sub 2}PdSi{sub 3}. The mediating interactions between the crystallographic part and the magnetic part of the system are discussed. (orig.)

Dissociation of NF3 in shock waves

International Nuclear Information System (INIS)

Breshears, W.D.; Bird, P.F.

1978-01-01

The thermal dissociation rate of NF 3 in mixtures of 5% and 10%NF 3 in Ar has been measured behind incident shock waves over the temperature range 1330-2000 K. Dissociation rates were determined from postshock density gradients measured by laser beam deflection. The second order rate coefficient determined for NF 3 -Ar collisions is k/sub d/=2.31 x 10 15 exp(-20500/T) cm 3 mole sec

3D dynamic simulation of crack propagation in extracorporeal shock wave lithotripsy

Science.gov (United States)

Wijerathne, M. L. L.; Hori, Muneo; Sakaguchi, Hide; Oguni, Kenji

2010-06-01

Some experimental observations of Shock Wave Lithotripsy(SWL), which include 3D dynamic crack propagation, are simulated with the aim of reproducing fragmentation of kidney stones with SWL. Extracorporeal shock wave lithotripsy (ESWL) is the fragmentation of kidney stones by focusing an ultrasonic pressure pulse onto the stones. 3D models with fine discretization are used to accurately capture the high amplitude shear shock waves. For solving the resulting large scale dynamic crack propagation problem, PDS-FEM is used; it provides numerically efficient failure treatments. With a distributed memory parallel code of PDS-FEM, experimentally observed 3D photoelastic images of transient stress waves and crack patterns in cylindrical samples are successfully reproduced. The numerical crack patterns are in good agreement with the experimental ones, quantitatively. The results shows that the high amplitude shear waves induced in solid, by the lithotriptor generated shock wave, play a dominant role in stone fragmentation.

Antiferromagnetic ordering of Er2NiSi3 compound

International Nuclear Information System (INIS)

Pakhira, Santanu; Mazumdar, Chandan; Ranganathan, R.

2014-01-01

Ternary intermetallics of the stoichiometric composition R 2 TX 3 , where, R = rare earth element, T = d-electron transition metal and X= p-electron element, crystallizes in hexagonal A1B 2 type crystal structure with space group P6/mmm. We report here the synthesis and basic magnetic properties of the compound Er 2 NiSi 3 . Paramagnetic to antiferromagnetic phase change occurs below 5.4 K for this compound. (author)

Magnetic properties of Nd3(Fe,Mo)29 compound and its nitride

International Nuclear Information System (INIS)

Pan Hongge

1998-01-01

The iron-rich ternary intermetallic compound Nd 3 (Fe,Mo) 29 with the Nd 3 (Fe,Ti) 29 -type monoclinic structure and its nitride were prepared. After nitrogenation, the nitride retains the structure of the parent compound, but the unit-cell volume of the nitride is 5.9% greater than that of the parent compound. The Curie temperature of Nd 3 (Fe,Mo) 29 nitride is 70.9% higher than that of the parent compound and the saturation magnetization of the nitride is about 6.6% (at 4.2 K) and 23.7% (at 300 K) higher than that of the parent compound. The anisotropy of the nitride is similar to that of parent compound, which exhibits plane anisotropy. (orig.)

Layout of wave gauge array for estimation of 3D waves

DEFF Research Database (Denmark)

Jakobsen, Morten Møller; Frigaard, Peter

2012-01-01

Wave gauge array are commonly used to estimate significant wave properties of multi-directional waves. The objective of this study is to gain insight into which parameters influence the accuracy of an array. The approach chosen is to determine the accuracy of an array by comparing generated waves...

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, Phytoflash

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, Phytoflash. The MAGI mission is to use the Wave Glider to sample the late summer chlorophyll bloom that...

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, Weather

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, Weather. The MAGI mission is to use the Wave Glider to sample the late summer chlorophyll bloom that develops...

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, Telemetry

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, Telemetry. The MAGI mission is to use the Wave Glider to sample the late summer chlorophyll bloom that develops...

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, MOSE

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, MOSE. The MAGI mission is to use the Wave Glider to sample the late summer chlorophyll bloom that develops near...

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, AIS

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, AIS. The MAGI mission is to use the Wave Glider to sample the late summer chlorophyll bloom that develops near...

Liquid Robotics Wave Glider, Honey Badger (G3), 2015, CTD

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Liquid Robotics Wave Glider, Honey Badger (G3), 2015, CTD. The MAGI mission is to use the Wave Glider to sample the late summer chlorophyll bloom that develops near...

Low-temperature field evaporation of Nb3Sn compound

International Nuclear Information System (INIS)

Ksenofontov, V.A.; Kul'ko, V.B.; Kutsenko, P.A.

1986-01-01

Investigation results on field evaporation of superconducting Nb 3 Sn compound wth A15 lattice are presented. Compound evaporation is shown to proceed in two stages. Evaporation field and ionic composition of evaporating material are determined. It is found out that in strong electric fields compound surface represents niobium skeleton, wich does not form regular image. Comparison of ion-microscopic and calculated images formed by low-temperature field evaporation indicates to possibility of sample surface reconstruction after preferable tin evaporation

Smart electric grids. Economic and environmental value, general implementation. September 2017. Contribution by RTE - Full report

International Nuclear Information System (INIS)

2017-09-01

This report is the RTE's contribution to studies commissions by public authorities on the social and economic valorisation of smart grids for the different actors. It first proposes an overview of the various considered technical and technological solutions: storage, active management of residential, tertiary and industrial demand, and steerability of renewable energies. After a recall of objectives related to the development of smart grids, the report reviews the methodological framework adopted for a previous study (general principles, modelling principles for the electricity system operation, use of the Flexis model, economic and environmental assessment), and proposes an overview of methodological developments achieved since 2015. It discusses how this study compares with others related to smart grid flexibility published in France and in Europe. Then, after having stated some hypotheses, the report presents the analytical framework for quantitative results, discusses economic and environmental assessments performed for each solution (storage, active management for different sectors, and steerability of wind energy production). The next part presents different global economically relevant scenarios of smart grid deployment, with assessments by 2030

Microsomal cytochrome P450-3A4 (CYP3A4) nanobiosensor for the determination of 2,4-dichlorophenol-An endocrine disruptor compound

Energy Technology Data Exchange (ETDEWEB)

Hendricks, Nicolette R.; Waryo, Tesfaye T.; Arotiba, Omotayo; Jahed, Nazeem; Baker, Priscilla G.L. [SensorLab, Department of Chemistry, University of Western Cape, Moderddam Road, Bellville, Cape Town 7535 (South Africa); Iwuoha, Emmanuel I. [SensorLab, Department of Chemistry, University of Western Cape, Moderddam Road, Bellville, Cape Town 7535 (South Africa)], E-mail: eiwuoha@uwc.ac.za

2009-02-28

Cytochrome P450-3A4 (CYP3A4) is a monooxygenase enzyme that plays a major role in the detoxification of bioactive compounds and hydrophobic xenobiotics (e.g. medicines, drugs, environmental pollutants, food supplements and steroids). Physiologically the monooxygenation reactions of this class II, microsomal, b-type heme enzyme, usually requires cytochrome P450 reductase, NADPH. A novel CYP3A4 biosensor system that essentially simplified the enzymatic redox processes by allowing electron transfer between the electrode and the enzyme redox centre to occur, without any need for the physiological redox partners, was developed for the detection of 2,4-dichlorophenol (2,4-DCP), a priority environmental pollutant and an endocrine disruptor. The biosensor, GC/Naf-Co(Sep){sup 3+}/CYP3A4/Naf, was constructed by encapsulating CYP3A4 in a Nafion-cobalt (III) sepulchrate (Naf-Co(Sep){sup 3+}) composite film on a glassy carbon (GC) electrode. The responses of the biosensor to 2,4-dichlorophenol, erythromycin (CYP3A4 native substrate) and ketoconazole (CYP 3A4 natural inhibitor) were studied by cyclic and square wave voltammetric techniques. The detection limit (DL) of the biosensor for 2,4-dichlorophenol was 0.043 {mu}g L{sup -1}, which is by an order of magnitude lower than the EU limit (0.3 {mu}g L{sup -1}) for any pesticide compound in ground water. The biosensor's DL is lower than the U.S. Environmental Protection Agency's drinking water equivalent level (DWEL) value for 2,4-DCP, which is 2 {mu}g L{sup -1}.

Surfing the big WAVE: Insights into the role of WAVE3 as a driving force in cancer progression and metastasis.

Science.gov (United States)

Sossey-Alaoui, Khalid

2013-04-01

WAVE3 belongs to the WASP/WAVE family of actin cytoskeleton remodeling proteins. These proteins are known to be involved in several biological functions ranging from controlling cell shape and movement, to being closely associated with pathological conditions such as cancer progression and metastasis. Last decade has seen an explosion in the literature reporting significant scientific advances on the molecular mechanisms whereby the WASP/WAVE proteins are regulated both in normal physiological as well as pathological conditions. The purpose of this review is to present the major findings pertaining to how WAVE3 has become a critical player in the regulation of signaling pathways involved in cancer progression and metastasis. The review will conclude with suggesting options for the potential use of WAVE3 as a therapeutic target to prevent the progression of cancer to the lethal stage that is the metastatic disease. Copyright © 2012 Elsevier Ltd. All rights reserved.

An efficient flexible-order model for 3D nonlinear water waves

DEFF Research Database (Denmark)

Engsig-Karup, Allan Peter; Bingham, Harry B.; Lindberg, Ole

2009-01-01

The flexible-order, finite difference based fully nonlinear potential flow model described in [H.B. Bingham, H. Zhang, On the accuracy of finite difference solutions for nonlinear water waves, J. Eng. Math. 58 (2007) 211-228] is extended to three dimensions (3D). In order to obtain an optimal......, robustness and energy conservation are presented together with demonstrations of grid independent iteration count and optimal scaling of the solution effort. Calculations are made for 3D nonlinear wave problems for steep nonlinear waves and a shoaling problem which show good agreement with experimental...

SOME PROBLEMS ON JUMP CONDITIONS OF SHOCK WAVES IN 3-DIMENSIONAL SOLIDS

Institute of Scientific and Technical Information of China (English)

LI Yong-chi; YAO Lei; HU Xiu-zhang; CAO Jie-dong; DONG Jie

2006-01-01

Based on the general conservation laws in continuum mechanics, the Eulerian and Lagrangian descriptions of the jump conditions of shock waves in 3-dimensional solids were presented respectively. The implication of the jump conditions and their relations between each other, particularly the relation between the mass conservation and the displacement continuity, were discussed. Meanwhile the shock wave response curves in 3-dimensional solids, i.e. the Hugoniot curves were analysed, which provide the foundation for studying the coupling effects of shock waves in 3-dimensional solids.

Occurrence of Extended-Spectrum β-Lactamases, Plasmid-Mediated Quinolone Resistance, and Disinfectant Resistance Genes in Escherichia coli Isolated from Ready-To-Eat Meat Products

DEFF Research Database (Denmark)

Li, Lili; Ye, Lei; Kromann, Sofie

2017-01-01

There are growing concerns about the coselection of resistance against antibiotics and disinfectants in bacterial pathogens. The aim of this study was to characterize the antimicrobial susceptibility profiles, the prevalence of extended-spectrum β-lactamases (ESBLs), plasmid-mediated quinolone...... resistance genes (PMQRs), and quaternary ammonium compound resistance genes (QACs) in Escherichia coli isolated from ready-to-eat (RTE) meat products obtained in Guangzhou, China, and to determine whether these genes were colocalized in the isolates. A total of 64 E. coli isolates were obtained from 720 RTE...... isolates from RTE meat products. The E. coli isolates with multiple antimicrobial resistance genes may transmit to humans through food chain and thus require further investigation and increased awareness....

Heavy fermion Ce{sub 3}Co{sub 4}Sn{sub 13} compound under pressure

Energy Technology Data Exchange (ETDEWEB)

Collave, J. R.; Borges, H. A. [Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro, 22453-900, Rio de Janeiro, RJ (Brazil); Ramos, S. M.; Hering, E. N. [Centro Brasileiro de Pesquisas Físicas, Rua Dr. Xavier Sigaud 150, 22290-180, Rio de Janeiro, RJ (Brazil); SPSMS, UMR-E CEA/UJF-Grenoble 1, INAC, 38054, Grenoble (France); Fontes, M. B.; Baggio-Saitovitch, E.; Bittar, E. M., E-mail: bittar@cbpf.br [Centro Brasileiro de Pesquisas Físicas, Rua Dr. Xavier Sigaud 150, 22290-180, Rio de Janeiro, RJ (Brazil); Mendonça-Ferreira, L. [Centro de Ciências Naturais e Humanas, Universidade Federal do ABC, 09210-170, Santo André, SP (Brazil); Pagliuso, P. G. [Instituto de Física “Gleb Wataghin,” UNICAMP, Campinas, SP 13083-859 (Brazil)

2015-05-07

The non-magnetic heavy fermion compound Ce{sub 3}Co{sub 4}Sn{sub 13} was studied under pressure. We report single crystalline measurements of electrical resistivity as a function of temperature ρ(T) under pressure. Some characteristic features related to a structural transition (T{sub S}), crystalline field effects (T{sub CEF}), and a low temperature maximum (T{sub max}), possibly connected simultaneously to the onset of Kondo lattice coherence and short range magnetic correlations, were identified in the ρ(T) data. A pressure-temperature phase diagram with T{sub S} and T{sub max} was constructed by mapping these features. Like for most Ce-based heavy fermion compounds, T{sub max} moves to higher temperatures with pressure, indicating that it is related to the Kondo energy scale, due to the increase of hybridization induced by pressure. On the other hand, T{sub S}, associated to a superlattice distortion and probably combined with a charge density wave transition, decreases as a function of pressure. However, differently from the Sr{sub 3−x}Ca{sub x}Ir{sub 4}Sn{sub 13} system, where a superlattice quantum phase transition is observed [L. E. Klintberg et al., Phys. Rev. Lett. 109, 237 008 (2012)], in Ce{sub 3}Co{sub 4}Sn{sub 13} T{sub S} ∼ 154 K, at ambient pressure (P = 0), seems to stabilize at around 143 K for P ≥ 19 kilobars. We also investigated ρ(T) in external magnetic fields, at P = 0. Negative magnetoresistance and increase of T{sub max} are observed, suggesting suppression of low temperature short range magnetic correlations.

Review of 3D Printed Millimeter-Wave and Terahertz Passive Devices

Directory of Open Access Journals (Sweden)

Bing Zhang

2017-01-01

Full Text Available The 3D printing technology is catching attention nowadays. It has certain advantages over the traditional fabrication processes. We give a chronical review of the 3D printing technology from the time it was invented. This technology has also been used to fabricate millimeter-wave (mmWave and terahertz (THz passive devices. Though promising results have been demonstrated, the challenge lies in the fabrication tolerance improvement such as dimensional tolerance and surface roughness. We propose the design methodology of high order device to circumvent the dimensional tolerance and suggest specific modelling of the surface roughness of 3D printed devices. It is believed that, with the improvement of the 3D printing technology and related subjects in material science and mechanical engineering, the 3D printing technology will become mainstream for mmWave and THz passive device fabrication.

Moessbauer study of the YFe3 compound

International Nuclear Information System (INIS)

Fisher, W.G.; Kuzmin, R.N.; Vardapetyan, R.P.

1975-01-01

Nuclear Gamma Recoilless Resonance measurement was carried out on iron sites in the YFe 3 compound at 80 and 295 K to obtain information on the iron sublattice in the absence of rare-earth magnetic moment. The results of the measurement are reported. (Z.S.)

Stimulated polarization wave process in spin 3/2 chains

International Nuclear Information System (INIS)

Furman, G. B.

2007-01-01

Stimulated wave of polarization, triggered by a flip of a single spin, presents a simple model of quantum amplification. Recently, it has been demonstrated that, in an idealized one-dimensional Ising spin 1/2 chain with nearest-neighbor interactions and realistic spin 1/2 chain including the natural dipole-dipole interactions, irradiated by a weak resonant transverse field, a wave of flipped spins can be triggered by a single spin flip. Here we focuse on control of polarization wave in chain of spin 3/2, where the nuclear quadrupole interaction is dominant. Results of simulations for 1D spin chains and rings with up to five spins are presented.

First-principles study of new quaternary Heusler compounds without 3d transition metal elements: ZrRhHfZ (Z = Al, Ga, In)

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaotian [School of Material Sciences and Engineering, Hebei University of Technology, Tianjin 300130 (China); Institute for Superconducting & Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Cheng, Zhenxiang, E-mail: cheng@uow.edu.au [Institute for Superconducting & Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Guo, Ruikang [School of Material Sciences and Engineering, Hebei University of Technology, Tianjin 300130 (China); Wang, Jianli [Institute for Superconducting & Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Rozale, Habib [Condensed Matter and Sustainable Development Laboratory, Physics Department, University of Sidi-Bel-Abbès, 22000 Sidi-Bel-Abbès (Algeria); Wang, Liying [Department of Physics, Tianjin University, Tianjin 300350 (China); Yu, Zheyin [Institute for Superconducting & Electronic Materials (ISEM), University of Wollongong, Wollongong 2500 (Australia); Liu, Guodong, E-mail: gdliu1978@126.com [School of Material Sciences and Engineering, Hebei University of Technology, Tianjin 300130 (China)

2017-06-01

Plane-wave pseudo-potential methods based on density functional theory are employed to investigate the electronic structures, and the magnetic and half-metallic properties of the newly designed quaternary Heusler compounds ZrRhHfZ (Z = Al, Ga, In) without 3d transition metal elements. The calculated results show that ZrRhHfZ (Z = Al, Ga, In) compounds are half-metallic, with 100% spin polarization around the Fermi level. The structural stability of these compounds has been tested from the aspects of their cohesion energy and formation. The spin-flip/half-metallic gaps of ZrRhHfZ (Z = Al, Ga, In) compounds are quite large, with values of 0.2548 eV, 0.3483 eV, and 0.2866 eV, respectively. These compounds show Slater-Pauling behavior, and the total spin magnetic moment per unit cell (M{sub t}) scales with the total number of valence electrons (Z{sub t}) following the rule: M{sub t} = Z{sub t} - 18. The magnetization of ZrRhHfZ (Z = Al, Ga, In) compounds mainly comes from the 4d electrons of the Zr atoms and the 5d electrons of the Hf atoms. Furthermore, the effects of uniform strain and tetragonal deformation on the half metallicity has been investigated in detail, which is important for practical application. Finally, we reveal that the half-metallicity can be maintained when the Coulomb interactions are considered. - Highlights: • New quaternary compounds without 3d transition metal elements have been designed. • The electronic structures and magnetism of the ZrRhHfZ compounds have been studied. • The effect of strain on the half-metallic behavior has been tested. • The effect of the Coulomb interactions on the half-metallicity has been investigated.

Elastic properties of distorted triangular lattice KNiCl3-family compounds

International Nuclear Information System (INIS)

Nishiwaki, Yoichi; Hasegawa, Takumi; Machida, Kenichi; Takeuchi, Yoshio

2006-01-01

In order to discuss the condensation of the K 4 -mode in KNiCl 3 -family compounds, the temperature dependences of the elastic compliances of KNiCl 3 , RbMnBr 3 , RbFeBr 3 , and RbCoBr 3 were measured. In each compound, the temperature dependence of the elastic compliances s 33 showed a sharp discontinuity at the point of structural phase transition from a prototype P6 3 /mmc structure. The structural phase transitions of the KNiCl 3 -family compounds are induced by the condensation of the K 4 -mode at the Brilluoin zone boundary in the P6 3 /mmc structure. When the K 4 -mode is regarded as an order parameter η, the Landau free energy includes coupling term η 2 T 3 , where T 3 is an external stress. The experimental results were interpreted satisfactorily on the basis of a phenomenological Landau theory. (author)

Parity violation in the compound nucleus

International Nuclear Information System (INIS)

Bowman, J.D.; Frankle, C.M.; Green, A.A.

1994-01-01

The status of parity violation in the compound nucleus is reviewed. The results of previous experimental results obtained by scattering polarized epithermal neutrons from heavy nuclei in the 3-p and 4-p p-wave strength function peaks are presented. Experimental techniques are presented. The extraction of the mean squared matrix element of the parity-violating interaction, M 2 , between compound-nuclear levels and the relationship of M 2 to the coupling strengths in the meson exchange weak nucleon-nucleon potential are discussed. The tendency of measured asymmetries to have a common sign and theoretical implications are discussed. New experimental results are presented that show that the common sign phenomenon is not universal, as theoretical models developed up to now would predict

WEC3: Wave Energy Converter Code Comparison Project: Preprint

Energy Technology Data Exchange (ETDEWEB)

Combourieu, Adrien; Lawson, Michael; Babarit, Aurelien; Ruehl, Kelley; Roy, Andre; Costello, Ronan; Laporte Weywada, Pauline; Bailey, Helen

2017-01-01

This paper describes the recently launched Wave Energy Converter Code Comparison (WEC3) project and present preliminary results from this effort. The objectives of WEC3 are to verify and validate numerical modelling tools that have been developed specifically to simulate wave energy conversion devices and to inform the upcoming IEA OES Annex VI Ocean Energy Modelling Verification and Validation project. WEC3 is divided into two phases. Phase 1 consists of a code-to-code verification and Phase II entails code-to-experiment validation. WEC3 focuses on mid-fidelity codes that simulate WECs using time-domain multibody dynamics methods to model device motions and hydrodynamic coefficients to model hydrodynamic forces. Consequently, high-fidelity numerical modelling tools, such as Navier-Stokes computational fluid dynamics simulation, and simple frequency domain modelling tools were not included in the WEC3 project.

Low-Toxicity Diindol-3-ylmethanes as Potent Antifouling Compounds.

Science.gov (United States)

Wang, Kai-Ling; Xu, Ying; Lu, Liang; Li, Yongxin; Han, Zhuang; Zhang, Jun; Shao, Chang-Lun; Wang, Chang-Yun; Qian, Pei-Yuan

2015-10-01

In the present study, eight natural products that belonged to di(1H-indol-3-yl)methane (DIM) family were isolated from Pseudovibrio denitrificans UST4-50 and tested for their antifouling activity against larval settlement (including both attachment and metamorphosis) of the barnacle Balanus (=Amphibalanus) amphitrite and the bryozoan Bugula neritina. All diindol-3-ylmethanes (DIMs) showed moderate to strong inhibitory effects against larval settlement of B. amphitrite with EC50 values ranging from 18.57 to 1.86 μM and could be considered as low-toxicity antifouling compounds since their LC50/EC50 ratios were larger than 15. Furthermore, the DIM- and 4-(di(1H-indol-3-yl)methyl)phenol (DIM-Ph-4-OH)-treated larvae completed normal settlement when they were transferred to clean seawater after being exposed to those compounds for 24 h. DIM also showed comparable antifouling performance to the commercial antifouling biocide Sea-Nine 211(™) in the field test over a period of 5 months, which further confirmed that DIMs can be considered as promising candidates of environmentally friendly antifouling compounds.

A SAR and QSAR Study of New Artemisinin Compounds with Antimalarial Activity

Directory of Open Access Journals (Sweden)

Cleydson Breno R. Santos

2013-12-01

Full Text Available The Hartree-Fock method and the 6-31G** basis set were employed to calculate the molecular properties of artemisinin and 20 derivatives with antimalarial activity. Maps of molecular electrostatic potential (MEPs and molecular docking were used to investigate the interaction between ligands and the receptor (heme. Principal component analysis and hierarchical cluster analysis were employed to select the most important descriptors related to activity. The correlation between biological activity and molecular properties was obtained using the partial least squares and principal component regression methods. The regression PLS and PCR models built in this study were also used to predict the antimalarial activity of 30 new artemisinin compounds with unknown activity. The models obtained showed not only statistical significance but also predictive ability. The significant molecular descriptors related to the compounds with antimalarial activity were the hydration energy (HE, the charge on the O11 oxygen atom (QO11, the torsion angle O1-O2-Fe-N2 (D2 and the maximum rate of R/Sanderson Electronegativity (RTe+. These variables led to a physical and structural explanation of the molecular properties that should be selected for when designing new ligands to be used as antimalarial agents.

Wave Reflection in 3D Conditions

DEFF Research Database (Denmark)

Zanuttigh, Barbara; Andersen, Thomas Lykke

2010-01-01

Based on recent experiments carried out in wave basin on breakwaters with armour layer of rocks and cubes, this paper examines the dependence of the reflection coefficient on wave directional spreading and obliquity. Results suggest that long-crested and short-crested waves give similar reflectio...

High-order finite difference solution for 3D nonlinear wave-structure interaction

DEFF Research Database (Denmark)

Ducrozet, Guillaume; Bingham, Harry B.; Engsig-Karup, Allan Peter

2010-01-01

This contribution presents our recent progress on developing an efficient fully-nonlinear potential flow model for simulating 3D wave-wave and wave-structure interaction over arbitrary depths (i.e. in coastal and offshore environment). The model is based on a high-order finite difference scheme O...

Compounded effects of heat waves and droughts over the Western Electricity Grid: spatio-temporal scales of impacts and predictability toward mitigation and adaptation.

Science.gov (United States)

Voisin, N.; Kintner-Meyer, M.; Skaggs, R.; Xie, Y.; Wu, D.; Nguyen, T. B.; Fu, T.; Zhou, T.

2016-12-01

Heat waves and droughts are projected to be more frequent and intense. We have seen in the past the effects of each of those extreme climate events on electricity demand and constrained electricity generation, challenging power system operations. Our aim here is to understand the compounding effects under historical conditions. We present a benchmark of Western US grid performance under 55 years of historical climate, and including droughts, using 2010-level of water demand and water management infrastructure, and 2010-level of electricity grid infrastructure and operations. We leverage CMIP5 historical hydrology simulations and force a large scale river routing- reservoir model with 2010-level sectoral water demands. The regulated flow at each water-dependent generating plants is processed to adjust water-dependent electricity generation parameterization in a production cost model, that represents 2010-level power system operations with hourly energy demand of 2010. The resulting benchmark includes a risk distribution of several grid performance metrics (unserved energy, production cost, carbon emission) as a function of inter-annual variability in regional water availability and predictability using large scale climate oscillations. In the second part of the presentation, we describe an approach to map historical heat waves onto this benchmark grid performance using a building energy demand model. The impact of the heat waves, combined with the impact of droughts, is explored at multiple scales to understand the compounding effects. Vulnerabilities of the power generation and transmission systems are highlighted to guide future adaptation.

The production of He-3 and heavy ion enrichment in He-3-rich flares by electromagnetic hydrogen cyclotron waves

Science.gov (United States)

Temerin, M.; Roth, I.

1992-01-01

A new model is presented for the production of He-3 and heavy ion enrichments in He-3-rich flares using a direct single-stage mechanism. In analogy with the production of electromagnetic hydrogen cyclotron waves in earth's aurora by electron beams, it is suggested that such waves should exist in the electron acceleration region of impulsive solar flares. Both analytic and test-particle models of the effect of such waves in a nonuniform magnetic field show that these waves can selectively accelerate He-3 and heavy ions to MeV energies in a single-stage process, in contrast to other models which require a two-stage mechanism.

Obtaining and characterizing the binary compound Zr3Pt

International Nuclear Information System (INIS)

Tanoni, Diego; Arico, Sergio F; Alonso, Paula R

2006-01-01

The equilibrium phases in the Zr - Pt binary system are not fully defined. Experiences carried out from 0% to 50% at. Pt in the equilibrium diagram of Zr-Pt phases in 2001 revealed the presence of the intermetallic compounds Zr 2 Pt, Zr 5 Pt 3 , ZrPt (already previously identified by other authors) and a compound of 25% composition at Pt with an unidentified crystalline structure. This experimental work aims to fill out the information on this compound by characterizing its crystallography. An alloy was produced in the binary system Zr-Pt with a composition close to the stoichiometry by casting in an arc furnace, and was studied by optic and electronic metallography. The identification and crystallographic characterization of the phase is based on measurements of composition in electronic microwave and on analysis of spectrums obtained by X-ray diffraction. The results are presented, showing the presence in the cast structure of the solid solution zircon phases (hexagonal) and of the inter-metallic compound Zr 5 Pt 3 . These two phases were identified in the X-ray diffraction diagrams as well as the presence of other reflections that are associated with the inter-metallic Zr 3 Pt. The measurements of composition consistently reveal the presence of a phase of 25%at Pt composition. The structure's morphology shown in metallographies reveals the occurrence of a eutectic type transformation during cooling. We conclude that the formation of the phase sought in a composition 25 % at Pt should occur at temperatures below the eutectic transformation, and could be a peritectoid formation as was previously proposed. Therefore, the sample needs to be homogenized with thermal treatments that favor the formation and stabilization of the compound (CW)

3D plane-wave least-squares Kirchhoff migration

KAUST Repository

Wang, Xin; Dai, Wei; Huang, Yunsong; Schuster, Gerard T.

2014-01-01

A three dimensional least-squares Kirchhoff migration (LSM) is developed in the prestack plane-wave domain to increase the quality of migration images and the computational efficiency. Due to the limitation of current 3D marine acquisition

Spin waves at the liquid 3He-4He interface

International Nuclear Information System (INIS)

Heff, A.; Candela, D.; Edwards, D.O.; Kumar, S.

1987-01-01

The properties of various interfaces in helium and, in particular, the interface between liquid 3 He and a solution of 3 He in 4 He, may be studied using spin waves. Assuming no transverse relaxation, the boundary condition for the transverse magnetization contains one complex kinetic coefficient, b. For the normal 3 He to 3 He- 4 He interface, b is related to the 3 He quasi-particle transmission probability antiτ, which we estimate from a simple model. A calculation of the spin wave absorption spectrum for a typical geometry shows that b and antiτ may be measured by NMR. Neither b nor antiτ is greatly affected when the pure 3 He enters the A phase, but both are strongly reduced in the B phase

Coordination compounds of cobalt (3), chromium (3) and vanadium (3) with s-methylthiosemicarbazone of salicylic aldehyde

Energy Technology Data Exchange (ETDEWEB)

Leovats, V.M.; Gehrbehlehu, N.V.; Tsanich, V.D. (AN Moldavskoj SSR, Kishinev. Inst. Khimii)

1982-04-01

Coordination compounds of trivalent cobalt, chromium and vanadium with S-methylthiosemicarbazone of salicylic aldehyde H/sub 2/L of (Co(HL)/sub 2/)XxnH/sub 2/O (X=Cl, Br, I, NO/sub 3/, ClO/sub 4/), (CoL(NH/sub 3/)/sub 3/)NO/sub 3/, (Co(HL)/sub 2/)/sub 2/(Co(NCS)/sub 4/)x2H/sub 2/O, (CoCl(DH)/sub 2/(H/sub 2/L))xH/sub 2/O, (Cr(HL)/sub 2/)XxnH/sub 2/O (X=Cl, NO/sub 3/), (V(HL)/sub 2/)Clx1/2H/sub 2/O, (M(HL)L)xnH/sub 2/O (M=Co, Cr, V) compositions are synthesized and investigated. It is shown, that H/sub 2/L behaves as a tridentate ligand at the expense of (O, N, N) set of donor atoms. The effective magnetic moment of the compounds is calculated.

Magnetic and hyperfine interactions in HoFe{sub 1−x}Cr{sub x}O{sub 3} (0≤x≤1) compounds

Energy Technology Data Exchange (ETDEWEB)

Kotnana, Ganesh [Magnetic Materials and Device Physics Laboratory, Department of Physics, Indian Institute of Technology Hyderabad, Hyderabad 502285 (India); Reddy, V. Raghavendra [UGC-DAE Consortium for Scientific Research, Khandwa Road, Indore 452001 (India); Jammalamadaka, S. Narayana, E-mail: surya@iith.ac.in [Magnetic Materials and Device Physics Laboratory, Department of Physics, Indian Institute of Technology Hyderabad, Hyderabad 502285 (India)

2017-05-01

We report on the magnetic and Mössbauer properties of polycrystalline HoFe{sub 1-x}Cr{sub x}O{sub 3} (0≤x≤1) compounds. Magnetization data reveals the continuous tailoring of magnetic transition due to weakening of Ho{sup 3+}-Fe{sup 3+} and Fe{sup 3+}-Fe{sup 3+} interactions in the entire temperature range by replacing the Fe{sup 3+} ions with Cr{sup 3+} ions. The observed decrease in Néel temperature (T{sub N}) and increase in spin re-orientation transition temperature (T{sub SR}) with the replacement of Fe{sup 3+} with Cr{sup 3+} is ascribed to the weakening of Fe(Cr)-O-Fe(Cr) antiferromagnetic exchange interaction. In addition, we also attribute such a change in T{sub N} to the enhancement of ferromagnetic interaction of adjacent Cr{sup 3+} moments through t-e hybridization as a result of the structural distortion. The decrease in isomer shift (IS) suggests enhancement of the interaction between nuclear charge with the 3s electrons as a result of decrease in radial part of 3d wave function with Cr addition. In this paper we also discuss about the variation of quadrupole splitting (QS) and hyperfine fields (H{sub hf}) with Cr addition in HoFe{sub 1-x}Cr{sub x}O{sub 3} (0≤x≤1) compounds. - Highlights: • Magnetic and Mössbauer properties of HoFe{sub 1-x}Cr{sub x}O{sub 3} (0≤x≤1) compounds. • T{sub N} changes due to weakening of Ho{sup 3+}-Fe{sup 3+} and Fe{sup 3+}-Fe{sup 3+} interactions with Cr. • The decrease in isomer shift (IS) is due to decrease in radial part of 3d wavefunction. • Octahedral distortion leads to increase in quadrupole splitting.

Rogue waves and rational solutions of a (3+1)-dimensional nonlinear evolution equation

International Nuclear Information System (INIS)

Zhaqilao,

2013-01-01

A simple symbolic computation approach for finding the rogue waves and rational solutions to the nonlinear evolution equation is proposed. It turns out that many rational solutions with real and complex forms of a (3+1)-dimensional nonlinear evolution equation are obtained. Some features of rogue waves and rational solutions are graphically discussed. -- Highlights: •A simple symbolic computation approach for finding the rational solutions to the NEE is proposed. •Some rogue waves and rational solutions with real and complex forms of a (3+1)-D NEE are obtained. •Some features of rogue waves are graphically discussed

Rogue waves and rational solutions of a (3+1)-dimensional nonlinear evolution equation

Energy Technology Data Exchange (ETDEWEB)

Zhaqilao,, E-mail: zhaqilao@imnu.edu.cn

2013-12-06

A simple symbolic computation approach for finding the rogue waves and rational solutions to the nonlinear evolution equation is proposed. It turns out that many rational solutions with real and complex forms of a (3+1)-dimensional nonlinear evolution equation are obtained. Some features of rogue waves and rational solutions are graphically discussed. -- Highlights: •A simple symbolic computation approach for finding the rational solutions to the NEE is proposed. •Some rogue waves and rational solutions with real and complex forms of a (3+1)-D NEE are obtained. •Some features of rogue waves are graphically discussed.

Structural, magnetic and transport properties of Mn3.1Sn0.9 and Mn3.1Sn0.9N compounds

International Nuclear Information System (INIS)

Feng, W.J.; Li, D.; Ren, W.J.; Li, Y.B.; Li, W.F.; Li, J.; Zhang, Y.Q.; Zhang, Z.D.

2007-01-01

The cubic anti-perovskite Mn 3.1 Sn 0.9 N compound is prepared via nitrogenation of the hexagonal Mn 3.1 Sn 0.9 compound. A magnetic phase diagram of Mn 3.1 Sn 0.9 compound is constructed by analysis of data of its magnetic properties. For Mn 3.1 Sn 0.9 N compound, parasitic ferromagnetism exists in the temperature range of 5-370 K, besides a spin-reorientation at about 280 K. Mn 3.1 Sn 0.9 compound exhibits a metallic conducting behavior, while Mn 3.1 Sn 0.9 N displays a metal-nonmetal transition due to the electron localization caused by the static disorder. The differences of the physical properties between the both compounds, are discussed, in terms of the correlation of the hexagonal DO 19 and the cubic anti-perovskite structures, the reduction of the distances between Mn atoms, and the spin-pairing or charge transfer effect due to the electron donation by N 2p to Mn 3d states after introduction of N atoms into the interstitial sites of Mn 3.1 Sn 0.9 compound

Physical explanation of the SLIPI technique by the large scatterer approximation of the RTE

International Nuclear Information System (INIS)

Kristensson, Elias; Kristensson, Gerhard

2017-01-01

Visualizing the interior of a turbid scattering media by means light-based methods is not a straightforward task because of multiple light scattering, which generates image blur. To overcome this issue, a technique called Structured Laser Illumination Planar Imaging (SLIPI) was developed within the field of spray imaging. The method is based on a ‘light coding’ strategy to distinguish between directly and multiply scattered light, allowing the intensity from the latter to be suppressed by means of data post-processing. Recently, the performance of the SLIPI technique was investigated, during which deviations from theoretical predictions were discovered. In this paper, we aim to explain the origin of these deviations, and to achieve this end, we have performed several SLIPI measurements under well-controlled conditions. Our experimental results are compared with a theoretical model that is based on the large scatterer approximation of the Radiative Transfer Equation but modified according to certain constraints. Specifically, our model is designed to (1) ignore all off-axis intensity contributions, (2) to treat unperturbed- and forward-scattered light equally and (3) to accept light to scatter within a narrow forward-cone as we believe these are the rules governing the SLIPI technique. The comparison conclusively shows that optical measurements based on scattering and/or attenuation in turbid media can be subject to significant errors if not all aspects of light-matter interactions are considered. Our results indicate, as were expected, that forward-scattering can lead to deviations between experiments and theoretical predictions, especially when probing relatively large particles. Yet, the model also suggests that the spatial frequency of the superimposed ‘light code’ as well as the spreading of the light-probe are important factors one also needs to consider. The observed deviations from theoretical predictions could, however, potentially be exploited to

A wave-bending structure at Ka-band using 3D-printed metamaterial

Science.gov (United States)

Wu, Junqiang; Liang, Min; Xin, Hao

2018-03-01

Three-dimensional printing technologies enable metamaterials of complex structures with arbitrary inhomogeneity. In this work, a 90° wave-bending structure at the Ka-band (26.5-40 GHz) based on 3D-printed metamaterials is designed, fabricated, and measured. The wave-bending effect is realized through a spatial distribution of varied effective dielectric constants. Based on the effective medium theory, different effective dielectric constants are accomplished by special, 3D-printable unit cells, which allow different ratios of dielectric to air at the unit cell level. In contrast to traditional, metallic-structure-included metamaterial designs, the reported wave-bending structure here is all dielectric and implemented by the polymer-jetting technique, which features rapid, low-cost, and convenient prototyping. Both simulation and experiment results demonstrate the effectiveness of the wave-bending structure.

Mn(III)-initiated facile oxygenation of heterocyclic 1,3-dicarbonyl compounds.

Science.gov (United States)

Rahman, Md Taifur; Haque, Md Aminul; Igarashi, Hikaru; Nishino, Hiroshi

2011-11-16

The Mn(III)-initiated aerobic oxidation of heterocyclic 1,3-dicarbonyl compounds, such as 4-alkyl-1,2-diphenylpyrazolidine-3,5-diones, 1,3-dialkylpyrrolidine-2,4-diones, 3-alkyl-1,5-dimethylbarbituric acids, and 3-butyl-4-hydroxy-2-quinolinone gave excellent to good yields of the corresponding hydroperoxides, which were gradually degraded by exposure to the metal initiator after the reaction to afford the corresponding alcohols. The synthesis of 30 heterocyclic 1,3-dicarbonyl compounds, the corresponding hydroperoxides and the 10 alcohols, their characterization, and the limitations of the procedure are described. In addition, the mechanism of the hydroperoxidation and the redox decomposition of the hydroperoxides are discussed.

Magnetic and structural properties of yellow europium oxide compound and Eu(OH)3

International Nuclear Information System (INIS)

Lee, Dongwook; Seo, Jiwon; Valladares, Luis de los Santos; Avalos Quispe, O.; Barnes, Crispin H.W.

2015-01-01

A new material based on a yellow europium oxide compound was prepared from europium oxide in a high vacuum environment. The structural and magnetic properties of the material were investigated. Owing to the absence of a crystal structure, the material exhibited a disordered magnetic behavior. In a reaction with deionized (DI) water without applied heat, the compound assumed a white color as soon as the DI water reached the powder, and the structure became polycrystalline Eu(OH) 3 . The magnetic properties, such as the thermal hysteresis, disappeared after the reaction with DI water, and the magnetic susceptibility of the yellow oxide compound weakened. The magnetic properties of Eu(OH) 3 were also examined. Although Eu 3+ is present in Eu(OH) 3 , a high magnetic moment due to the crystal field effect was observed. - Graphical abstract: (top left) Optical image of the yellow europium oxide compound. (top right) Optical image of the product of DI water and yellow europium oxide. (bottom) Magnetization curves as a function of temperature measured in various magnetic field. - Highlights: • We prepared a new material based on a yellow europium oxide compound from europium oxide. • We characterized the magnetic properties of the material which exhibits a disordered magnetic behavior such as thermal hysteresis. • The compound turned white (Eu(OH) 3 ) as soon as the DI water reached the powder. • The thermal hysteresis disappeared after the reaction with DI water and the magnetic susceptibility of the yellow oxide compound weakened

Atomic-resolution studies of In{sub 2}O{sub 3}-ZnO compounds on aberration-corrected electron microscopes

Energy Technology Data Exchange (ETDEWEB)

Yu, Wentao

2009-10-23

In this work, the characteristic inversion domain microstructures of In{sub 2}O{sub 3}(ZnO){sub m} (m=30) compounds were investigated by TEM methods. At bright-atom contrast condition, atomically resolved HR-TEM images of In{sub 2}O{sub 3}(ZnO){sub 30} were successfully acquired in [1 anti 100] zone axis of ZnO, with projected metal columns of {proportional_to}1.6 A well resolved. From contrast maxima in the TEM images, local lattice distortions at the pyramidal inversion domain boundaries were observed for the first time. Lattice displacements and the strain field in two-dimensions were visualized and measured using the 'DALI' algorithm. Atomically resolved single shot and focal series images of In{sub 2}O{sub 3}(ZnO){sub 30} were achieved in both zone axes of ZnO, [1 anti 100] and [2 anti 1 anti 10], respectively. The electron waves at the exit-plane were successfully reconstructed using the software package 'TrueImage'. Finally, a three dimensional atomic structure model for the pyramidal IDB was proposed, with an In distribution of 10%, 20%, 40%, 20% and 10% of In contents over 5 atom columns along basal planes, respectively. Through a detailed structural study of In{sub 2}O{sub 3}(ZnO){sub m} compounds by using phase-contrast and Z-contrast imaging at atomic resolution, In{sup 3+} atoms are determined with trigonal bi-pyramidal co-ordination and are distributed at the pyramidal IDBs. (orig.)

Effect of combination processing on the microbial, chemical and sensory quality of ready-to-eat (RTE) vegetable pulav

International Nuclear Information System (INIS)

Kumar, R.; George, Johnsy; Rajamanickam, R.; Nataraju, S.; Sabhapathy, S.N.; Bawa, A.S.

2011-01-01

Effect of irradiation in combination with retort processing on the shelf life and safety aspects of an ethnic Indian food product like vegetable pulav was investigated. Gamma irradiation of RTE vegetable pulav was carried out at different dosage rates with 60 Co followed by retort processing. The combination processed samples were analysed for microbiological, chemical and sensory characteristics. Microbiological analysis indicated that irradiation in combination with retort processing has significantly reduced the microbial loads whereas the chemical and sensory analysis proved that this combination processing is effective in retaining the properties even after storage for one year at ambient conditions. The results also indicated that a minimum irradiation dosage at 4.0 kGy along with retort processing at an F 0 value of 2.0 is needed to achieve the desired shelf life with improved organoleptic qualities. - Highlights: → A combination processing involving gamma irradiation and retort processing. → Combination processing reduced microbial loads. → Minimum dose of 4.0 kGy together with retort processing at F 0 -2.0 is required to achieve commercial sterility.

Effect of combination processing on the microbial, chemical and sensory quality of ready-to-eat (RTE) vegetable pulav

Energy Technology Data Exchange (ETDEWEB)

Kumar, R., E-mail: kumardfrl@gmail.com [Defence Food Research Laboratory, Mysore, Karnataka 570011 (India); George, Johnsy; Rajamanickam, R.; Nataraju, S.; Sabhapathy, S.N.; Bawa, A.S. [Defence Food Research Laboratory, Mysore, Karnataka 570011 (India)

2011-12-15

Effect of irradiation in combination with retort processing on the shelf life and safety aspects of an ethnic Indian food product like vegetable pulav was investigated. Gamma irradiation of RTE vegetable pulav was carried out at different dosage rates with {sup 60}Co followed by retort processing. The combination processed samples were analysed for microbiological, chemical and sensory characteristics. Microbiological analysis indicated that irradiation in combination with retort processing has significantly reduced the microbial loads whereas the chemical and sensory analysis proved that this combination processing is effective in retaining the properties even after storage for one year at ambient conditions. The results also indicated that a minimum irradiation dosage at 4.0 kGy along with retort processing at an F{sub 0} value of 2.0 is needed to achieve the desired shelf life with improved organoleptic qualities. - Highlights: > A combination processing involving gamma irradiation and retort processing. > Combination processing reduced microbial loads. > Minimum dose of 4.0 kGy together with retort processing at F{sub 0}-2.0 is required to achieve commercial sterility.

Magnetic behavior of binary intermetallic compound YPd{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Pandey, Abhishek [S. N. Bose National Centre for Basic Sciences, Block-JD, Sector-III, Salt Lake, Kolkata 700098 (India); Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India); Mazumdar, Chandan [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)], E-mail: chandan.mazumdar@saha.ac.in; Ranganathan, R. [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)

2009-05-12

We report the results of detailed magnetic studies on binary rare-earth-transition metal compound YPd{sub 3}. The results of temperature and magnetic field dependent DC-magnetic measurements along with the results of powder X-ray diffraction measurement and electrical transport have been discussed. The X-ray data suggest a well-defined ordered crystal lattice, free from any detectable impurity phase. Magnetization data exhibits predominant diamagnetic character at higher fields. However, the compound exhibits anomalous behavior at low fields.

Circular Cationic Compounds B3Rgn+ of Triangular Ion B3 Trapping Rare Gases

Institute of Scientific and Technical Information of China (English)

ZHANG Ruiwen; LI Anyong; LI Zhuozhe

2017-01-01

The circular cationic compounds B3Rgn+(n=1-3,Rg=He-Rn) formed by the electron-deficient aromatic ion B3+ trapping rare gases were studied theoretically.The formed B-Rg bond has large bonding energy in the range of 60--209 kJ/mol,its length is close to the stun of covalent radii of B and Rg,for Ar-Rn.The analyses based on the natural bond orbitals and electron density topology show that the B-Rg bonds for Ar-Rn have strong covalent character.The geometric structures,binding energy,bond nature and thermodynamic stability of the boron-rare gas compounds show that these species for Ar-Rn may be experimentally available.Several different theoretical studies have demonstrated that these triangular cations are aromatic.

Traveling-wave ion mobility mass spectrometry of protein complexes

DEFF Research Database (Denmark)

Salbo, Rune; Bush, Matthew F; Naver, Helle

2012-01-01

The collision cross-section (Ω) of a protein or protein complex ion can be measured using traveling-wave (T-wave) ion mobility (IM) mass spectrometry (MS) via calibration with compounds of known Ω. The T-wave Ω-values depend strongly on instrument parameters and calibrant selection. Optimization ...

Readily-accessible oxidation of d0 organozirconium compounds: The electronic structure of (η5-C5H5)3ZrX compounds

International Nuclear Information System (INIS)

Strittmatter, R.J.; Bursten, B.E.; Rhodes, L.F.; Morris, D.E.; Rogers, R.D.

1990-01-01

In an effort to obtain a comparison between organotransition metal and organoactinide complexes, a series of Cp 3 ZrX compounds have been synthesized. A single crystal X-ray crystallographic study of Cp 3 ZrCl reveals that all three Cp ligands are bound in an η 5 fashion. Electrochemical investigations of this series show a first oxidation of these d 0 compounds approximately one volt less positive than the d 0 Cp 2 ZrX 2 compounds and approximately one-half volt less positive than the d 0 f 0 Cp 3 ThCl compound. These results will be presented along with a discussion of the electronic structure of this series, as determined by Xα-SW and Fenske-Hall calculations

Photo double ionization of He: C3-like wave function for the two electron continuum

Energy Technology Data Exchange (ETDEWEB)

Otranto, S.; Garibotti, C.R. [Conicet and Centro Atomico Bariloche (Argentina); Otranto, S. [Universidad Nacional del Sur, Dept. de Fisica, Bahia Blanca (Argentina)

2002-12-01

We evaluate the triply differential cross-section (TDCS) for photo double ionization (PDI) of helium. A first approximation to the final state can be obtained by neglecting the e-e interaction and the non-orthogonal kinetic energy. This leads to the C2 model which proposes as solution a product of 2 independent Coulomb wave plane waves. A better approximation is the C3 model where the C3 wave describes the e-e motion as independent of the presence of the nucleus and represents it by a Coulomb continuum wave. The C3 wave function mainly consists in the product of 3 Coulomb waves, each one representing the interaction between a pair of particles. We use a C3 final continuum wave function with an inter-electronic effective coordinate to express the nuclear screening. Comparison with the standard C3 model shows that the TDCS is enhanced in the threshold region by effect of the reduced inter-electronic repulsion introduced by the present model. A more accurate description of the intermediate energy region is also obtained. Comparison with recent experimental data shows a good overall agreement of the angular distributions. The theoretical PDI total cross-section shows a relevant improvement in the intermediate energy region relative to the C3 model, which converges to data for photon energies larger than 1 keV.

Photo double ionization of He: C3-like wave function for the two electron continuum

International Nuclear Information System (INIS)

Otranto, S.; Garibotti, C.R.; Otranto, S.

2002-01-01

We evaluate the triply differential cross-section (TDCS) for photo double ionization (PDI) of helium. A first approximation to the final state can be obtained by neglecting the e-e interaction and the non-orthogonal kinetic energy. This leads to the C2 model which proposes as solution a product of 2 independent Coulomb wave plane waves. A better approximation is the C3 model where the C3 wave describes the e-e motion as independent of the presence of the nucleus and represents it by a Coulomb continuum wave. The C3 wave function mainly consists in the product of 3 Coulomb waves, each one representing the interaction between a pair of particles. We use a C3 final continuum wave function with an inter-electronic effective coordinate to express the nuclear screening. Comparison with the standard C3 model shows that the TDCS is enhanced in the threshold region by effect of the reduced inter-electronic repulsion introduced by the present model. A more accurate description of the intermediate energy region is also obtained. Comparison with recent experimental data shows a good overall agreement of the angular distributions. The theoretical PDI total cross-section shows a relevant improvement in the intermediate energy region relative to the C3 model, which converges to data for photon energies larger than 1 keV

Towards a new tool to develop a 3-D shear-wave velocity model from converted waves

Science.gov (United States)

Colavitti, Leonardo; Hetényi, György

2017-04-01

The main target of this work is to develop a new method in which we exploit converted waves to construct a fully 3-D shear-wave velocity model of the crust. A reliable 3-D model is very important in Earth sciences because geological structures may vary significantly in their lateral dimension. In particular, shear-waves provide valuable complementary information with respect to P-waves because they usually guarantee a much better correlation in terms of rock density and mechanical properties, reducing the interpretation ambiguities. Therefore, it is fundamental to develop a new technique to improve structural images and to describe different lithologies in the crust. In this study we start from the analysis of receiver functions (RF, Langston, 1977), which are nowadays largely used for structural investigations based on passive seismic experiments, to map Earth discontinuities at depth. The RF technique is also commonly used to invert for velocity structure beneath single stations. Here, we plan to combine two strengths of RF method: shear-wave velocity inversion and dense arrays. Starting from a simple 3-D forward model, synthetic RFs are obtained extracting the structure along a ray to match observed data. During the inversion, thanks to a dense stations network, we aim to build and develop a multi-layer crustal model for shear-wave velocity. The initial model should be chosen simple to make sure that the inversion process is not influenced by the constraints in terms of depth and velocity posed at the beginning. The RFs inversion represents a complex problem because the amplitude and the arrival time of different phases depend in a non-linear way on the depth of interfaces and the characteristics of the velocity structure. The solution we envisage to manage the inversion problem is the stochastic Neighbourhood Algorithm (NA, Sambridge, 1999a, b), whose goal is to find an ensemble of models that sample the good data-fitting regions of a multidimensional parameter

Pressure dependence of magnetic ordering temperatures of rare earth-Sn/sub 3/ compounds

Energy Technology Data Exchange (ETDEWEB)

Foner, S [Massachusetts Inst. of Tech., Cambridge (USA). Francis Bitter National Magnet Lab.

1979-12-01

Measurements of the hydrostatic pressure dependence of the Neel temperatures, Tsub(N), are reported for PrSn/sub 3/, NdSn/sub 3/, GdSn/sub 3/ and CeIn/sub 3/. Tsub(N) is found to increase with applied pressure for PrSn/sub 3/ and NdSn/sub 3/, whereas Tsub(N) is pressure independent within experimental error for GdSn/sub 3/ and CeIn/sub 3/. Slightly Sn-deficient RESn/sub 3/ (RE = rare earth) compounds are found consistently to be weakly ferromagnetic. The physical properties of the RESn/sub 3/ compounds exhibit analogies with the corresponding properties of dilute superconducting (LaRE)Sn/sub 3/ alloys. The high pressure data for PrSn/sub 3/ and CeIn/sub 3/ are qualitatively consistent with a 'Kondo necklace' model for magnetically ordered RE compounds with unstable 4f shells.

Pressure dependence of magnetic ordering temperatures of rare earth - Sn/sub 3/ compounds

Energy Technology Data Exchange (ETDEWEB)

DeLong, L E [Virginia Univ., Charlottesville (USA). Dept. of Physics; Guertin, R P; Foner, S

1979-12-01

Measurements of the hydrostatic pressure dependence of the Neel temperatures, Tsub(N), are reported for PrSn/sub 3/, NdSn/sub 3/, GdSn/sub 3/ and CeIn/sub 3/. Tsub(N) is found to increase with applied pressure for PrSn/sub 3/ and NdSn/sub 3/, whereas Tsub(N) is pressure independent within experimental error for GdSn/sub 3/ and CeIn/sub 3/. Slightly Sn-deficient RESn/sub 3/ (RE=rare earth) compounds are found consistently to be weakly ferromagnetic. The physical properties of the RESn/sub 3/ compounds exhibit analogies with the corresponding properties of dilute superconducting (LaRE)Sn/sub 3/ alloys. The high pressure data for PrSn/sub 3/ and CeIn/sub 3/ are qualitatively consistent with a 'Kondo necklace' model for magnetically ordered RE compounds with unstable 4f shells.

Towards a new technique to construct a 3D shear-wave velocity model based on converted waves

Science.gov (United States)

Hetényi, G.; Colavitti, L.

2017-12-01

A 3D model is essential in all branches of solid Earth sciences because geological structures can be heterogeneous and change significantly in their lateral dimension. The main target of this research is to build a crustal S-wave velocity structure in 3D. The currently popular methodologies to construct 3D shear-wave velocity models are Ambient Noise Tomography (ANT) and Local Earthquake Tomography (LET). Here we propose a new technique to map Earth discontinuities and velocities at depth based on the analysis of receiver functions. The 3D model is obtained by simultaneously inverting P-to-S converted waveforms recorded at a dense array. The individual velocity models corresponding to each trace are extracted from the 3D initial model along ray paths that are calculated using the shooting method, and the velocity model is updated during the inversion. We consider a spherical approximation of ray propagation using a global velocity model (iasp91, Kennett and Engdahl, 1991) for the teleseismic part, while we adopt Cartesian coordinates and a local velocity model for the crust. During the inversion process we work with a multi-layer crustal model for shear-wave velocity, with a flexible mesh for the depth of the interfaces. The RFs inversion represents a complex problem because the amplitude and the arrival time of different phases depend in a non-linear way on the depth of interfaces and the characteristics of the velocity structure. The solution we envisage to manage the inversion problem is the stochastic Neighbourhood Algorithm (NA, Sambridge, 1999), whose goal is to find an ensemble of models that sample the good data-fitting regions of a multidimensional parameter space. Depending on the studied area, this method can accommodate possible independent and complementary geophysical data (gravity, active seismics, LET, ANT, etc.), helping to reduce the non-linearity of the inversion. Our first focus of application is the Central Alps, where a 20-year long dataset of

Mn(III-Initiated Facile Oxygenation of Heterocyclic 1,3-Dicarbonyl Compounds

Directory of Open Access Journals (Sweden)

Md. Aminul Haque

2011-11-01

Full Text Available The Mn(III-initiated aerobic oxidation of heterocyclic 1,3-dicarbonyl compounds, such as 4-alkyl-1,2-diphenylpyrazolidine-3,5-diones, 1,3-dialkylpyrrolidine-2,4-diones, 3-alkyl-1,5-dimethylbarbituric acids, and 3-butyl-4-hydroxy-2-quinolinone gave excellent to good yields of the corresponding hydroperoxides, which were gradually degraded by exposure to the metal initiator after the reaction to afford the corresponding alcohols. The synthesis of 30 heterocyclic 1,3-dicarbonyl compounds, the corresponding hydroperoxides and the 10 alcohols, their characterization, and the limitations of the procedure are described. In addition, the mechanism of the hydroperoxidation and the redox decomposition of the hydroperoxides are discussed.

Preparation of Ti3Al intermetallic compound by spark plasma sintering

Science.gov (United States)

Ito, Tsutomu; Fukui, Takahiro

2018-04-01

Sintered compacts of single phase Ti3Al intermetallic compound, which have excellent potential as refractory materials, were prepared by spark plasma sintering (SPS). A raw powder of Ti3Al intermetallic compound with an average powder diameter of 176 ± 56 μm was used in this study; this large powder diameter is disadvantageous for sintering because of the small surface area. The samples were prepared at sintering temperatures (Ts) of 1088, 1203, and 1323 K, sintering stresses (σs) of 16, 32, and 48 MPa, and a sintering time (ts) of 10 min. The calculated relative densities based on the apparent density of Ti3Al provided by the supplier were approximately 100% under all sintering conditions. From the experimental results, it was evident that SPS is an effective technique for dense sintering of Ti3Al intermetallic compounds in a short time interval. In this report, the sintering characteristics of Ti3Al intermetallic compacts are briefly discussed and compared with those of pure titanium compacts.

Dispersion of complex dielectric constant and electronic characteristics of the compounds Nb-Al and Nb-Ge with A15 structure

International Nuclear Information System (INIS)

Kuzmichev, N.D.; Levchenko, I.S.; Motulevich, G.P.

1989-01-01

This paper reports that the dispersions of complex dielectric constant of the compounds Nb-Al and Nb-Ge with A15 structure, used for determination of electronic characteristics and their variations with temperature, are measured in the 0.177-3.1 eV spectral interval at 295 and 670 K. The squares of the plasma frequencies ω 2 p of conduction electrons are obtained. In both compounds ω 2 p ∼ 19 eV 2 , which is 3.2 times less than for niobium. In this spectral interval, Nb-Al has four interband transition zones at 0.2, 0.35, 1.45, and 3.1 eV, while Nb-Ge has five such bands: 0.21, 0.32, 0.48, 0.95 and 2.0 eV. As the temperature increases ω 2 p of conduction electrons increases somewhat more than for usual metals (in both compounds), and the decrease in the analogous characteristic in the long-wave band for Nb-Ge is unusually great, preserving the sum of the changes, and there is also a significant decrease in the width of the long-wave band. These anomalies can be explained by thermal transfer of electrons from the base state of the long-wave band to the conduction band

Charge density waves in solids

CERN Document Server

Gor'kov, LP

2012-01-01

The latest addition to this series covers a field which is commonly referred to as charge density wave dynamics.The most thoroughly investigated materials are inorganic linear chain compounds with highly anisotropic electronic properties. The volume opens with an examination of their structural properties and the essential features which allow charge density waves to develop.The behaviour of the charge density waves, where interesting phenomena are observed, is treated both from a theoretical and an experimental standpoint. The role of impurities in statics and dynamics is considered and an

Resistivity and magnetoresistance studies of Nb3Ir and V3Sb compounds

International Nuclear Information System (INIS)

Ghosh, M.; Barman, A.; Das, A.; Meikap, A.K.; De, S.K.; Chatterjee, S.

1997-01-01

We have performed measurements of electrical resistivity and magnetoresistivity of the compounds Nb 3 Ir and V 3 Sb in the temperature range 1.8 K ≤ T ≤ 300 K in absence as well as in presence of a magnetic field up to 7.7 T. At high temperature the resistivity shows a linear behaviour whereas the low temperature resistivity shows a T 2 behaviour. The data are fitted to several theories in order to explain the anomalous behaviour of the resistivity. The simple s-d scattering model is not adequate to offer a proper explanation for the positive magnetoresistance. The enhancement of the coefficient A of the T 2 term and the deviation from the quadratic field dependence of the resistivity may be due to the anisotropy in the compounds. (orig.)

10 GHz Standing-Wave Coplanar Stripline on LiNbO3 Crystal for Radio to Optical-Wave Conversion

Science.gov (United States)

Darwis, F.; Wijayanto, Y. N.; Setiawan, A.; Mahmudin, D.; Rahman, A. N.; Daud, P.

2018-04-01

Recently, X-band radar systems are used widely for surveillance and navigation applications. Especially in archipelago or maritime country, the surveillance/navigation radar systems are required to monitoring critical areas and managing marine traffic. Accurate detection and fast analysis should be improved furthermore to provide security and safety condition. Therefore, several radar systems should be installed in many places to coverage the critical areas within radar networks. The radar network can be connected using optical fibers since it has extremely low propagation loss with optical-wave to carry-out the radar-wave. One important component in the scenario is a radio to optical-wave conversion component. In this paper, we report a 10 GHz radio to optical-wave conversion component using standing-wave coplanar stripline (CPS) on LiNbO3 optical crystal as the substrate. The standing-wave CPS electrodes with narrow slot are arranged in an array structure. An optical waveguide is located close to the narrow slot. The CPS electrodes were analysed using electromagnetic analysis software for 10 GHz operational frequency. Responses for slot width and electrode length variation are reported. As results, return loss of -14.580 dB and -19.517 dB are obtained for single and array CPS electrodes respectively. Optimization of the designed radio to optical-wave conversion devices was also done.

Toward 3D structural information from quantitative electron exit wave analysis

International Nuclear Information System (INIS)

Borisenko, Konstantin B; Moldovan, Grigore; Kirkland, Angus I; Wang, Amy; Van Dyck, Dirk; Chen, Fu-Rong

2012-01-01

Simulations show that using a new direct imaging detector and accurate exit wave restoration algorithms allows nearly quantitative restoration of electron exit wave phase, which can be regarded as only qualitative for conventional indirect imaging cameras. This opens up a possibility of extracting accurate information on 3D atomic structure of the sample even from a single projection.

Guided Wave Propagation in a Gold Electrode Film on a Pb(Mg1/3Nb2/3)O3−33%PbTiO3 Ferroelectric Single Crystal Substrate

International Nuclear Information System (INIS)

Huang Nai-Xing; LÜ Tian-Quan; Zhang Rui; Wang Yu-Ling; Cao Wen-Wu

2014-01-01

Dispersion relations of Love mode acoustic guided waves propagation in Pb(Mg 1/3 Nb 2/3 )O 3 −33%PbTiO 3 (PMN-0.33 PT) single crystal with a gold electrode film are calculated. There is no cross coupling among Love wave modes, which is conducive to eliminating the cross interference between modes. The general formula is derived to precisely measure the thickness of the electrode. More acoustic energy would be concentrated inside the electrode with the increase of film thickness for a given frequency. Compared with the PZT-5 ceramic, [001] c poled PMN-33%PT single crystal has a slower attenuation of the amplitude of the acoustic guided wave. Therefore, single crystal is extremely suitable for making low loss acoustic wave devices with a high operating frequency

Pyridine group assisted addition of diazo-compounds to imines in the 3-CC reaction of 2-aminopyridines, aldehydes, and diazo-compounds.

Science.gov (United States)

Gulevich, Anton V; Helan, Victoria; Wink, Donald J; Gevorgyan, Vladimir

2013-02-15

A novel three-component coupling (3-CC) reaction of 2-aminoazines, aromatic aldehydes, and diazo-compounds producing polyfunctional β-amino-α-diazo-compounds has been developed. The reaction features an unprecedented heterocycle-assisted addition of a diazo-compound to an imine. The obtained diazoesters were efficiently converted into valuable heterocycles as well as β-amino acid derivatives.

Decision from the Commission of Electricity Regulation (CRE) dated from May 2, 2002 about a dispute between the manager of the power transportation network (RTE) and the autonomous administration of Parisian transports (RATP) relative to the conditions of consideration of the multiplicity of power supply points in the contractual system of access to the power grid; Decision de la Commission de Regulation de l'Electricite (CRE) en date du 2 mai 2002 sur un different qui oppose le gestionnaire du Reseau de Transport d'Electricite (RTE) et la Regie Autonome des Transports Parisiens (RATP) relatif aux conditions de prise en compte de la multiplicite des points de livraison dans le dispositif contractuel d'acces au reseau electrique

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-01

This document is the analysis made by the French commission of electricity regulation (CRE) about a dispute between the French manager of the power transportation grid (RTE) and the autonomous administration of Parisian transports (RATP) about its contract of access to the grid for the power supply of the underground railway of Paris. The RATP requested a regrouping of all its 7 supply points in a single contract. After analysis of the hearings, the CRE considers that no discrimination exists in the contractual system proposed by the RTE and thus the RATP request has been rejected. (J.S.)

3-D FDTD simulation of shear waves for evaluation of complex modulus imaging.

Science.gov (United States)

Orescanin, Marko; Wang, Yue; Insana, Michael

2011-02-01

The Navier equation describing shear wave propagation in 3-D viscoelastic media is solved numerically with a finite differences time domain (FDTD) method. Solutions are formed in terms of transverse scatterer velocity waves and then verified via comparison to measured wave fields in heterogeneous hydrogel phantoms. The numerical algorithm is used as a tool to study the effects on complex shear modulus estimation from wave propagation in heterogeneous viscoelastic media. We used an algebraic Helmholtz inversion (AHI) technique to solve for the complex shear modulus from simulated and experimental velocity data acquired in 2-D and 3-D. Although 3-D velocity estimates are required in general, there are object geometries for which 2-D inversions provide accurate estimations of the material properties. Through simulations and experiments, we explored artifacts generated in elastic and dynamic-viscous shear modulus images related to the shear wavelength and average viscosity.

Transmission of 3H-compounds corresponding to the senescence signal in soybean

International Nuclear Information System (INIS)

Nooden, L.D.; Finkelstein, D.; Wetzel, P.

1987-01-01

To detect compounds transmitted from the pods to the leaves, the pods of explants at various stages were injected with 3 H-acetate and incubated for 24 hr. To avoid 3 H contamination, the leaf blades, pods, and stem were each vented separately with air (pods, leaves) or water (stem). The leaf blades were extracted with MeOH/CHCl 3 /formic acid/H 2 O (12:2:1:2 v/v), and after reduction to an aqueous phase, the 3 H was partitioned. Most 3 H entered the acid ether (50%) and aqueous (30%) phases with much less in the neutral and basic phases. The most 3 H was transmitted during mid and late podfill when the pods induce senescence. When chromatographed on TLC (silica gel) with n-BuOH/HAc/H 2 O) (450:112:188 v/v), the acid ether phase gave one sharp peak of 3 H, while the aqueous phase produced a broad peak. Most (80%) of the former peak, which corresponded to IAA and ABA, could be resolved from these compounds by reverse phase HPLC on a C 8 column with a MeOH/gradient. Thus, some compounds are transmitted from the pods to the leaves during induction of monocarpic senescence, and at least the acid ether-soluble compounds are of limited heterogeneity

Pyridine Group-Assisted Addition of Diazo-Compounds to Imines in the 3-CC Reaction of 2-Aminopyridines, Aldehydes, and Diazo-Compounds

Science.gov (United States)

Gulevich, Anton V.; Helan, Victoria; Wink, Donald J.

2013-01-01

A novel three-component (3-CC) coupling reaction of 2-aminoazines, aromatic aldehydes and diazo-compounds producing polyfunctional β-amino-α-diazo-compounds has been developed. The reaction features an unprecedented heterocycle-assisted addition of a diazo-compound to an imine. The obtained diazoesters were efficiently converted into valuable heterocycles, as well as to β-amino acid derivatives. PMID:23373731

Periodicity effects of axial waves in elastic compound rods

DEFF Research Database (Denmark)

Nielsen, R. B.; Sorokin, S. V.

2015-01-01

Floquet analysis is applied to the Bernoulli-Euler model for axial waves in a periodic rod. Explicit asymptotic formulae for the stop band borders are given and the topology of the stop band pattern is explained. Eigenfrequencies of the symmetric unit cell are determined by the Phase-closure Prin......Floquet analysis is applied to the Bernoulli-Euler model for axial waves in a periodic rod. Explicit asymptotic formulae for the stop band borders are given and the topology of the stop band pattern is explained. Eigenfrequencies of the symmetric unit cell are determined by the Phase......-closure Principle, and their correspondence with stop band formation is shown. Steady-state and transient dynamics of a periodic rod of finite length are analysed numerically and the difference in structural response when excitation is done in either stop- or pass bands is demonstrated. A physical interpretation...

Thermal Expansion of Ni3Al Intermetallic Compound: Experiment and Simulation

International Nuclear Information System (INIS)

Wang Hai-Peng; Lü Peng; Zhou Kai; Wei Bing-Bo

2016-01-01

The thermal expansion of Ni 3 Al intermetallic compound is determined by a thermal dilatometer and simulated by the molecular dynamics method. The results of the linear thermal expansion coefficients are presented from 200 K up to the maximum temperature of 1600 K. The single phase of Ni 3 Al intermetallic compound is confirmed by x-ray diffraction together with DSC melting and solidification peaks, from which the solidus and the liquidus temperatures are obtained to be 1660 and 1695 K, respectively. The measured linear thermal expansion coefficient increases from 1.5 × 10 −5 to 2.7 × 10 −5 K −1 in the experimental temperature range, in good agreement with the data obtained by the molecular dynamics simulation, just a slight difference from the temperature dependence coefficient. Furthermore, the atomic structure and position are presented to reveal the atom distribution change during thermal expansion of Ni 3 Al compound. (paper)

Deflagration wave formed by ion beam, 3

International Nuclear Information System (INIS)

Niu, Keishiro; Abe, Takashi; Tamba, Moritake.

1980-01-01

An analysis is given for the structure of the deflagration wave which is formed in a target bombarded by an ion beam. Stationary deflagration and/or detonation waves are formed at the surface of the target in a case in which the reaction energy of direct fusion and/or the beam energy deposited in the target are less than a critical value. On the other hand, no solution for stationary wave exists, if the energy deposited in the wave exceeds a critical value. In the latter case, the time-dependent fundamental equations reduce approximately to a self-similar type of equations. Numerical integrations are carried out for this type of differential equations, and an example of self-similar deflagration wave numerically obtained is plotted in the figures. (author)

Fused Heterocyclic Compounds as Potent Indoleamine-2,3-dioxygenase 1 Inhibitors.

Science.gov (United States)

Panda, Subhankar; Roy, Ashalata; Deka, Suman Jyoti; Trivedi, Vishal; Manna, Debasis

2016-12-08

Uncontrolled metabolism of l-tryptophan (l-Trp) in the immune system has been recognized as a critical cellular process in immune tolerance. Indoleamine 2,3-dioxygenase 1 (IDO1) enzyme plays an important role in the metabolism of a local l-Trp through the kynurenine pathway in the immune systems. In this regard, IDO1 has emerged as a therapeutic target for the treatment of diseases that are associated with immune suppression like chronic infections, cancer, and others. In this study, we synthesized a series of pyridopyrimidine, pyrazolopyranopyrimidine, and dipyrazolopyran derivatives. Further lead optimizations directed to the identification of potent compounds, 4j and 4l (IC 50 = 260 and 151 nM, respectively). These compounds also exhibited IDO1 inhibitory activities in the low nanomolar range in MDA-MB-231 cells with very low cytotoxicity. Stronger selectivity for the IDO1 enzyme (>300-fold) over tryptophan 2,3-dioxygenase (TDO) enzyme was also observed for these compounds. Hence, these fused heterocyclic compounds are attractive candidates for the advanced study of IDO1-dependent cellular function and immunotherapeutic applications.

Synthesis and magnetic properties of heteronuclear 3d-4f compound

International Nuclear Information System (INIS)

Cristovao, B.; Ferenc, W.

2007-01-01

A novel heteronuclear 3d-4f compound having formula NdCu 3 L 3 ·13H 2 O (where H 3 L = Schiff base derived from 5-bromosalicylaldehyde and glycylglycine and L 3 = C 11 H 8 N 2 O 4 Br) was obtained. It was characterized by elemental and thermal analyses and magnetic measurements. The Cu(II)-Nd(III) compound is stable up to 323 K. During dehydration process the water molecules are lost in two stages. The magnetic susceptibility data for this complex change with temperature according to the Curie-Weiss law with Θ = -35 K. The magnetic moment values decrease from 5.00μ B at 303 K to 4.38μB at 76 K. (author)

Magnetic and transport properties of EuNi(Si1-xGex)3 compounds

International Nuclear Information System (INIS)

Uchima, K; Takaesu, Y; Akamine, H; Kakihana, M; Tomori, K; Uejo, T; Teruya, A; Nakamura, A; Hedo, M; Nakama, T; Yagasaki, K; Matsubayashi, K; Uwatoko, Y

2014-01-01

The magnetization M, electrical resistivity ρ, thermopower S and specific heat C of EuNi(Si 1-x Ge x ) 3 compounds have been measured at temperatures from 2 to 300 K. For the compounds of EuNi(Si 1-x Ge x ) 3 , we obtained an effective magnetic moment of μ eff ∼ 7.7 μ B , which is close to the divalent Eu value of μ eff =7.94 μ B . All compounds of EuNi(Si 1-x Ge x ) 3 order antiferromagnetically. The Néel temperature T N decreases monotonously with increasing the Ge concentration x from T N =49 K for EuNiSi 3 to T N =14 K for EuNiGe 3 . In the low temperature region below T N , anomalies corresponding to an additional magnetic phase transition into ferromagnetic state for compounds with x < 0.3, and into another antiferromagnetic for x > 0.3 were observed. The Curie temperature T C rapidly decreases with increasing x and vanishes at x ≈ 0.3. It is found that the magnetic phase transition temperatures of T N and T C in EuNi(Si 1-x Ge x ) 3 are strongly connected with the change of volume induced by the atomic substitution of Si by Ge

Brazilian offshore wave climate based on NWW3 reanalysis

Directory of Open Access Journals (Sweden)

Cássia Pianca

2010-03-01

Full Text Available This paper provides a description of the wave climate off the Brazilian coast based on an eleven-year time series (Jan/1997-Dec/2007 obtained from the NWW3 operational model hindcast reanalysis. Information about wave climate in Brazilian waters is very scarce and mainly based on occasional short-term observations, the present analysis being the first covering such temporal and spatial scales. To define the wave climate, six sectors were defined and analyzed along the Brazilian shelf-break: South (W1, Southeast (W2, Central (W3, East (W4, Northeast (W5 and North (W6. W1, W2 and W3 wave regimes are determined by the South Atlantic High (SAH and the passage of synoptic cold fronts; W4, W5 and W6 are controlled by the Intertropical Convergence Zone (ITCZ and its meridional oscillation. The most energetic waves are from the S, generated by the strong winds associated to the passage of cold fronts, which mainly affect the southern region. Wave power presents a decrease in energy levels from south to north, with its annual variation showing that the winter months are the most energetic in W1 to W4, while in W5 and W6 the most energetic conditions occur during the austral summer. The information presented here provides boundary conditions for studies related to coastal processes, fundamental for a better understanding of the Brazilian coastal zone.O presente trabalho apresenta o clima de ondas da região ao largo da costa brasileira com base em uma série temporal de onze anos (Jan/1997-Dez/2007 obtida através de dados de reanálise do modelo operacional NWW3. Informações sobre o regime de ondas no Brasil são escassas e baseadas em observações ocasionais de curto período, sendo a presente análise inédita na escala espaço-temporal apresentada. Para a definição do clima de ondas foram definidos e analisados seis setores ao longo da quebra da plataforma continental brasileira: Sul (W1, Sudeste (W2, Central (W3, Leste (W4, Nordeste (W5 e Norte

Bitropic D3 Dopamine Receptor Selective Compounds as Potential Antipsychotics.

Science.gov (United States)

Luedtke, Robert R; Rangel-Barajas, Claudia; Malik, Mahinder; Reichert, David E; Mach, R H

2015-01-01

Neuropsychiatric disorders represent a substantial social and health care issue. The National Institutes of Health estimates that greater than 2 million adults suffer from neuropsychiatric disorders in the USA. These individuals experience symptoms that can include auditory hallucinations, delusions, unrealistic beliefs and cognitive dysfunction. Although antipsychotic medications are available, suboptimal therapeutic responses are observed for approximately one-third of patients. Therefore, there is still a need to explore new pharmacotherapeutic strategies for the treatment of neuropsychiatric disorders. Many of the medications that are used clinically to treat neuropsychiatric disorders have a pharmacological profile that includes being an antagonist at D2-like (D2, D3 and D4) dopamine receptor subtypes. However, dopamine receptor subtypes are involved in a variety of neuronal circuits that include movement coordination, cognition, emotion, affect, memory and the regulation of prolactin. Consequently, antagonism at D2-like receptors can also contribute to some of the adverse side effects associated with the long-term use of antipsychotics including the a) adverse extrapyramidal symptoms associated with the use of typical antipsychotics and b) metabolic side effects (weight gain, hyperglycemia, increased risk of diabetes mellitus, dyslipidemia and gynecomastia) associated with atypical antipsychotic use. Preclinical studies suggest that D3 versus D2 dopamine receptor selective compounds might represent an alternative strategy for the treatment of the symptoms of schizophrenia. In this review we discuss a) how bitropic Nphenylpiperazine D3 dopamine receptor selective compounds have been developed by modification of the primary (orthosteric) and secondary (allosteric or modulatory) pharmacophores to optimize D3 receptor affinity and D2/D3 binding selectivity ratios and b) the functional selectivity of these compounds. Examples of how these compounds might be

Generation and Active Absorption of 2- and 3-Dimensional Linear Water Waves in Physical Models

DEFF Research Database (Denmark)

Christensen, Morten

in the wave channel in front of the wave generator. The results of physical model tests performed with an absorbing wave maker based on this principle show that the problem of rereflection is reduced significantly when active absorption is performed. Finally, an absorbing directional wave generator for 3-D...... generator is capable of of reducing the problem of rereflection in multidirectional, irregular wave fields significantly....

Synthesis of α-amino-1,3-dicarbonyl compounds via Ugi flow chemistry reaction: access to functionalized 1,2,3-triazoles.

Science.gov (United States)

Vasconcelos, Stanley N S; Fornari, Evelin; Caracelli, Ignez; Stefani, Hélio A

2017-11-01

The Ugi multicomponent reaction has been used as an important synthetic route to obtain compounds with potential biological activity. We present the rapid and efficient synthesis of [Formula: see text]-amino-1,3-dicarbonyl compounds in moderate to good yields via Ugi flow chemistry reactions performed with a continuous flow reactor. Such [Formula: see text]-amino-1,3-dicarbonyl compounds can act as precursors for the production of [Formula: see text]-amino acids via hydrolysis of the ethyl ester group as well as building blocks for the synthesis of novel compounds with the 1,2,3-triazole ring. The [Formula: see text]-amino acid derivatives of the Ugi flow chemistry reaction products were then used for dipeptide synthesis.

Orientation distribution in Bi2Te3-based compound prepared by spark plasma sintering

International Nuclear Information System (INIS)

Kim, K.T.; Kim, Y.H.; Lim, C.H.; Cho, D.C.; Lee, Y.S.; Lee, C.H.

2005-01-01

P-type Bi 0.5 Sb 1.5 Te 3 compounds doped with 3wt.% Te were fabricated by spark plasma sintering after mixing large powders(P L ) and small powders(P S ). We could obtained the highest figure of merit(Z C ) of 2.89 x 10 -3 /K in sintered compound mixed to P L :P S =80:20. This resulted from the increase of orientation by large powders(P S ) and the reduce of pores by small powders. The figure of merit(Z C ) of the sintered compound using only small powders(P S ) showed lower value of 2.67 x 10 -3 /K compared with that of sintered compound mixed to P L :P S =80:20 due to the increase of electrical resistivity. (orig.)

CAMEX-3 JPL SURFACE ACOUSTIC WAVE (SAW) HYGROMETER V1

Data.gov (United States)

National Aeronautics and Space Administration — This CAMEX-3 Jet Propulsion Laboratory (JPL) Surface Acoustic Wave (SAW) Hygrometer dataset consists of dewpoint timeline measurements acquired during each DC-8...

Influence of Element Substitution on Corrosion Behavior of Bi2Te3-Based Compounds

Science.gov (United States)

Kohri, Hitoshi; Yagasaki, Takayoshi

2018-02-01

Atmospheric water may condense on the surface of Bi2Te3-based compounds constituting the Peltier module, depending on the operating environment used. In the stage of disposal, Bi2Te3-based compounds may come into contact with water in waste disposal sites. There are very few publications about the influence of condensed water on Peltier modules. Bi2Te3-Sb2Te3 or Bi2Te3-Bi2Se3 pseudo binary system compounds are used as p-type material or n-type material, respectively. The lattice distortion will be induced in the crystal of Bi2Te3-based compounds by element substitution due to the reduction in their thermal conductivity. However, the influence of element substitution on the corrosion behavior of Bi2Te3-based compounds remains unclear. In this study, the influence of element substitution on the corrosion behavior of Bi2Te3-based compounds with practical compositions has been investigated. Bi0.5Sb1.5Te3 or Bi2Te2.85Se0.15 was prepared by the vertical Bridgman method. The electrochemical properties at room temperature were evaluated by cyclic voltammetry in a standard three-electrode cell. The working electrolyte was a naturally aerated 0.6 or 3.0 mass% NaCl solution. From the tendency for corrosion potential for all the samples, the corrosion sensitivity of ternary compounds was slightly higher than that of binary compounds. From the trend of current density, it was found that Bi0.5Sb1.5Te3 had a corrosion resistance intermediate between Bi2Te3 and Sb2Te3. On the other hand, corrosion resistance was affected despite a small amount of Se substitution, and the corrosion resistance of Bi2Te2.85Se0.15 was close to or lower than that of Bi2Se3. From the observation results of the corrosion products, the trends of morphology and composition of corrosion products for Bi0.5Sb1.5Te3 or Bi2Te2.85Se0.15 were consistent with those of Sb2Te3 or Bi2Se3, respectively. From the results of x-ray photoelectron spectroscopy for the electrolyte after testing, the possibility that a

Influence of Element Substitution on Corrosion Behavior of Bi2Te3-Based Compounds

Science.gov (United States)

Kohri, Hitoshi; Yagasaki, Takayoshi

2018-06-01

Atmospheric water may condense on the surface of Bi2Te3-based compounds constituting the Peltier module, depending on the operating environment used. In the stage of disposal, Bi2Te3-based compounds may come into contact with water in waste disposal sites. There are very few publications about the influence of condensed water on Peltier modules. Bi2Te3-Sb2Te3 or Bi2Te3-Bi2Se3 pseudo binary system compounds are used as p-type material or n-type material, respectively. The lattice distortion will be induced in the crystal of Bi2Te3-based compounds by element substitution due to the reduction in their thermal conductivity. However, the influence of element substitution on the corrosion behavior of Bi2Te3-based compounds remains unclear. In this study, the influence of element substitution on the corrosion behavior of Bi2Te3-based compounds with practical compositions has been investigated. Bi0.5Sb1.5Te3 or Bi2Te2.85Se0.15 was prepared by the vertical Bridgman method. The electrochemical properties at room temperature were evaluated by cyclic voltammetry in a standard three-electrode cell. The working electrolyte was a naturally aerated 0.6 or 3.0 mass% NaCl solution. From the tendency for corrosion potential for all the samples, the corrosion sensitivity of ternary compounds was slightly higher than that of binary compounds. From the trend of current density, it was found that Bi0.5Sb1.5Te3 had a corrosion resistance intermediate between Bi2Te3 and Sb2Te3. On the other hand, corrosion resistance was affected despite a small amount of Se substitution, and the corrosion resistance of Bi2Te2.85Se0.15 was close to or lower than that of Bi2Se3. From the observation results of the corrosion products, the trends of morphology and composition of corrosion products for Bi0.5Sb1.5Te3 or Bi2Te2.85Se0.15 were consistent with those of Sb2Te3 or Bi2Se3, respectively. From the results of x-ray photoelectron spectroscopy for the electrolyte after testing, the possibility that a

Reflection and transformation of acoustic waves at the interface in superfluid 3He-A

International Nuclear Information System (INIS)

Kekutiya, Sh.E.; Chkhaidze, N.D.

1997-01-01

Reflection and transformation of acoustic waves in 3 He-A and 3 He-A 1 are considered for two cases: (1) at the boundary with a solid impermeable wall at an arbitrary angle of incidence of a wave and (2) for normal incidence of waves on the interface between a free liquid and a system of periodic plane-parallel capillaries filling the semi-space. For the first case we have calculated the reflection coefficients of the first and the second sounds and spin and spin-temperature waves as well as the coefficients of transformation of these waves into each other. It is shown that the longitudinal wave undergoes no transformation into other waves, there occurs instead its complete reflection from the solid wall. The angle of incidence at which the energy attenuation coefficient of the first sound is maximum, and the interval of angles corresponding to the attenuation and the total interval reflection of the second sound are estimated. For the second case we have obtained: the coefficients of excitation of the fourth sound and the magneto-acoustic wave by the first and the second sounds; the reflection coefficients for the first and the second sounds and the longitudinal spin wave; the coefficient of transformation of the first sound into the second one and vice versa; the coefficient of reflection of the fourth sound from the capillary system - free liquid interface; the coefficient of excitation of longitudinal spin wave in free helium by the same wave in a capillary

Magnetic and structural properties of yellow europium oxide compound and Eu(OH){sub 3}

Energy Technology Data Exchange (ETDEWEB)

Lee, Dongwook, E-mail: dongwookleedl324@gmail.com [Cavendish Laboratory, University of Cambridge, J. J Thomson Av., Cambridge CB3 0HE (United Kingdom); Seo, Jiwon, E-mail: jiwonseo@yonsei.ac.kr [Department of Physics and IPAP, Yonsei University, Seoul 120-749 (Korea, Republic of); Valladares, Luis de los Santos [Cavendish Laboratory, University of Cambridge, J. J Thomson Av., Cambridge CB3 0HE (United Kingdom); Avalos Quispe, O. [Laboratorio de Cerámicos y Nanomateriales, Facultad de Ciencias Físicas, Universidad Nacional Mayor de San Marcos, Ap. Postal 14-0149, Lima, Perú (Peru); Barnes, Crispin H.W. [Cavendish Laboratory, University of Cambridge, J. J Thomson Av., Cambridge CB3 0HE (United Kingdom)

2015-08-15

A new material based on a yellow europium oxide compound was prepared from europium oxide in a high vacuum environment. The structural and magnetic properties of the material were investigated. Owing to the absence of a crystal structure, the material exhibited a disordered magnetic behavior. In a reaction with deionized (DI) water without applied heat, the compound assumed a white color as soon as the DI water reached the powder, and the structure became polycrystalline Eu(OH){sub 3}. The magnetic properties, such as the thermal hysteresis, disappeared after the reaction with DI water, and the magnetic susceptibility of the yellow oxide compound weakened. The magnetic properties of Eu(OH){sub 3} were also examined. Although Eu{sup 3+} is present in Eu(OH){sub 3}, a high magnetic moment due to the crystal field effect was observed. - Graphical abstract: (top left) Optical image of the yellow europium oxide compound. (top right) Optical image of the product of DI water and yellow europium oxide. (bottom) Magnetization curves as a function of temperature measured in various magnetic field. - Highlights: • We prepared a new material based on a yellow europium oxide compound from europium oxide. • We characterized the magnetic properties of the material which exhibits a disordered magnetic behavior such as thermal hysteresis. • The compound turned white (Eu(OH){sub 3}) as soon as the DI water reached the powder. • The thermal hysteresis disappeared after the reaction with DI water and the magnetic susceptibility of the yellow oxide compound weakened.

NpX3 compounds under high pressure

International Nuclear Information System (INIS)

Zwirner, S.; Kalvius, G.M.

1993-01-01

The systematics of hyperfine interactions and the ordering temperature T ord in isostructural NpX 3 compounds (X=Al, Si, Ga, Ge, ln, Sn) are briefly reviewed. NpSn 3 has been viewed as a Kondo lattice system, similar to CeAl 2 , NpIn 3 shows a modulated magnetic structure including low moment and nonmagnetic contributions at ambient pressure and 4.2 K. Preliminary results of recent 237 Np Moessbauer studies on NpIn 3 at ambient pressure and various temperatures and at 4.0(8) GPa and 4.2 K are reported. At 4.0(8) GPa, T ord rises from 17 to 22 K, the low-moment contributions of the modulated structure are reduced and the non-magnetic site is lost below T ord . The variation of the hyperfine parameters and of T ord with pressure is similar to the behavior observed in NpSn 3 . (orig.)

Synthesis, crystal structure and biological activity of a novel 1,2,3-thidiazole compound

International Nuclear Information System (INIS)

Ke, W.

2013-01-01

A new 1,2,3-thiadiazole compound was synthesized and characterized by 1H NMR, MS and HRMS. The crystal structure of the title compound (C/sub 12/H/sub 11/ClN/sub 2/O/sub 4/S/sub 2/, Mr = 346.80) has been determined by single-crystal X-ray diffraction. The crystal is of triclinic, space group P-1 with a = 8.4425(17) A, b = 8.9801(18) A, c = 9.859(2) A, alpha = 84.36(3) degree, beta = 86.71(3)degree, lambda = 83.25(3) degree, V = 737.9(3)A3, Z 2, F(000) = 356, Dc = 1.561 g/cm/sup 3/, mu = 0.557 mm-1, the final R1 0.0380 and wR2 = 0.0982 for 2160 observed reflections with I > 2sigma(I). A total of 12585 reflections were collected, of which 2601 were independent (Rint 0.0364). The herbicidal activity of title compound was determined, the results showed the title compound displayed excellent herbicidal activity against Brassica campestris. (author)

Orbit waves in the ABM phase of superfluid 3He

International Nuclear Information System (INIS)

Cross, M.C.; Anderson, P.W.

1975-01-01

Orbit waves are the Goldstone Boson mode of the broken rotational symmetry of the A phase of 3 He. In the absence of the nuclear dipole interaction they would simply be an oscillation of l, the direction in k-space of the point nodes of the gap in the excitation energy. First the case of the no dipole interaction is considered and the effects of this are included later. It is shown that over the range of temperatures for which the A phase is usually stable orbit waves are highly overdamped. (Auth.)

Addition compounds between lanthanide (III) and yttrium (III) and methanesulfonates (MS) and 3-picoline-N-oxide (3-pic NO)

International Nuclear Information System (INIS)

Zinner, L.B.

1984-01-01

The preparation and characterization of addition compounds between lanthanide methanesulfonates and 3-picoline-N-oxide of general formula Ln (MS) 3 .2(3-pic No), Ln being La, Yb and Y, were carried out. The techniques employed for characterization were: elemental analysis, X-ray diffraction, infrared absorption spectroscopy, electrolytic conductance in methanol, melting ranges and emission spectrum of the Eu (III) compound. (Author) [pt

Observation of gravity waves during the extreme tornado outbreak of 3 April 1974

Science.gov (United States)

Hung, R. J.; Phan, T.; Smith, R. E.

1978-01-01

A continuous wave-spectrum high-frequency radiowave Doppler sounder array was used to observe upper-atmospheric disturbances during an extreme tornado outbreak. The observations indicated that gravity waves with two harmonic wave periods were detected at the F-region ionospheric height. Using a group ray path computational technique, the observed gravity waves were traced in order to locate potential sources. The signals were apparently excited 1-3 hours before tornado touchdown. Reverse ray tracing indicated that the wave source was located at the aurora zone with a Kp index of 6 at the time of wave excitation. The summation of the 24-hour Kp index for the day was 36. The results agree with existing theories (Testud, 1970; Titheridge, 1971; Kato, 1976) for the excitation of large-scale traveling ionospheric disturbances associated with geomagnetic activity in the aurora zone.

Stability of Planar Rarefaction Wave to 3D Full Compressible Navier-Stokes Equations

Science.gov (United States)

Li, Lin-an; Wang, Teng; Wang, Yi

2018-05-01

We prove time-asymptotic stability toward the planar rarefaction wave for the three-dimensional full, compressible Navier-Stokes equations with the heat-conductivities in an infinite long flat nozzle domain {R × T^2} . Compared with one-dimensional case, the proof here is based on our new observations on the cancellations on the flux terms and viscous terms due to the underlying wave structures, which are crucial for overcoming the difficulties due to the wave propagation in the transverse directions x 2 and x 3 and its interactions with the planar rarefaction wave in x 1 direction.

Magnetic Spin Waves in CsNiF3 with an Applied Field

DEFF Research Database (Denmark)

Steiner, M.; Kjems, Jørgen

1977-01-01

The spin wave dispersion in the planar 1D ferromagnet CsNiF3 has been measured by inelastic neutron scattering in an external field. The spin wave linewidths are found to decrease with increasing field and become resolution-limited for H>10 kG at 4.2K. At high fields, H>10 kG, both energies...

Wave Generation Theory

DEFF Research Database (Denmark)

Frigaard, Peter; Høgedal, Michael; Christensen, Morten

The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered.......The intention of this manual is to provide some formulas and techniques which can be used for generating waves in hydraulic laboratories. Both long crested waves (2-D waves) and short crested waves (3-D waves) are considered....

A new wire fabrication processing using high Ga content Cu-Ga compound in V3Ga compound superconducting wire

International Nuclear Information System (INIS)

Hishinuma, Yoshimitsu; Nishimura, Arata; Kikuchi, Akihiro; Iijima, Yasuo; Takeuchi, Takao

2007-01-01

A superconducting magnet system is also one of the important components in an advanced magnetic confinement fusion reactor. Then it is required to have a higher magnetic field property to confine and maintain steady-sate burning deuterium (D)-tritium (T) fusion plasma in the large interspace during the long term operation. Burning plasma is sure to generate 14 MeV fusion neutrons during deuterium-tritium reaction, and fusion neutrons will be streamed and penetrated to superconducting magnet through large ports with damping neutron energy. Therefore, it is necessary to consider carefully not only superconducting property but also neutron irradiation property in superconducting materials for use in a future fusion reactor, and a 'low activation and high field superconducting magnet' will be required to realize the fusion power plant beyond International Thermonuclear Experimental Reactor (ITER). V-based superconducting material has a much shorter decay time of induced radioactivity compared with the Nb-based materials. We thought that the V 3 Ga compound was one of the most promising materials for the 'low activation and higher field superconductors' for an advanced fusion reactor. However, the present critical current density (J c ) property of V 3 Ga compound wire is insufficient for apply to fusion magnet applications. We investigated a new route PIT process using a high Ga content Cu-Ga compound in order to improve the superconducting property of the V 3 Ga compound wire. (author)

First flush of dissolved compounds

DEFF Research Database (Denmark)

Krebs, P.; Holzer, P.; Huisman, J.L.

1999-01-01

. It is known that since the wave celerity is higher than the flow velocity of the water, the increase of flow rate induced through rain runoff is recognised earlier at a certain downstream section of the combined sewer than the concentration increase of typical rain-water compounds originating from surface...

Diagnostic Usefulness of Real-Time Elastography for Liver Fibrosis in Chronic Viral Hepatitis B and C

Directory of Open Access Journals (Sweden)

Young Woon Kim

2014-01-01

Full Text Available The aim of this study was to investigate the diagnostic usefulness of real-time elastography (RTE for liver fibrosis in chronic viral hepatitis B (CHB and C (CHC. Fifty-one and thirty-two of the patients were diagnosed with CHB and CHC, respectively. Enrolled patients underwent liver biopsy and RTE. The FIB-4 index and aspartate transaminase-to-platelet ratio index (APRI were also measured. The liver fibrosis index (LFI by RTE increased significantly with the Knodell fibrosis stage: 3.14±0.62 for F0, 3.28 ± 0.42 for F1, 3.43 ± 0.53 for F3, and 4.09 ± 1.03 for F4 (P=0.000. LFI as well as APRI, FIB-4, platelet, albumin, and prothrombin time showed the difference in patients with advanced fibrosis (≥F3 and those with mild fibrosis (≤F1. In addition, RTE had better discrimination power between ≥F3 and F4 than between FIB-4 and APRI. In CHC patients, the area under receiver operating characteristic curves of RTE for advanced fibrosis was higher than that in CHB patients (0.795 versus 0.641. RTE is useful for the assessment of advanced fibrosis in patients with CHB and CHC and has better discrimination power than other serologic markers.

High resolution 3-D shear wave velocity structure in South China from surface wave tomography

Science.gov (United States)

Ning, S.; Guo, Z.; Chen, Y. J.

2017-12-01

Using continuous data from a total of 638 seismic stations, including 484 from CEArray between 2008 and 2013 and 154 from SINOPROBE between 2014 and 2015, we perform both ambient noise and earthquake Rayleigh wave tomography across South China. Combining Rayleigh wave phase velocity between 6and 40s periods from ambient noise tomography and Rayleigh wave phase velocity between 20and 140s from teleseismic two-plane-wave tomography, we obtain phase velocity maps between 6 and140 s periods. We then invert Rayleigh wave phase velocity to construct a 3-D shear wave velocity structure of South China by Markov Chain Monte Carlo method. Similar to other inversion results, our results correspond topography well. Moreover, our results also reveal that velocity structure of the eastern South China in mantle depth is similar to eastern North China, the core of the western South China, Sichuan Block (SB),still exists thick lithosphere. However, owing to much more data employed and some data quality control techniques in this research, our results reveal more detailed structures. Along Qinling-Dabie Orogenic Belt (QDOB), North-South Gravity Lineament (NSGL) and the Sichuan-Yunnan Rhombic Block (SYRB), there are obvious high speed anomalies in depths of 10-20 km, which possibly imply ancient intrusions. Moreover, it seems that Tancheng-Lujiang Fault Zone (TLFZ) has already cut through QDOB, forming a deep fracture cutting through the crust of the whole China continent. Although SB still exists thick lithosphere, there are indications for thermal erosion. At the same time, the lithosphere of the central SYRB seems to be experiencing delamination process, obviously forming a barrier to prevent the hot Tibetan Plateau (TP) mantle material from flowing further southeast. Upwelling hot mantle material possibly triggered by this delamination process might be the cause of the Emeishan Large Igneous Province. There exists an intercontinental low velocity layer in the crust of the TP

Observations of Equatorial Kelvin Wave Modes in FORMOSAT-3/COSMIC GPS RO Temperature Profiles

Directory of Open Access Journals (Sweden)

Potula Sree Brahmanandam

2010-01-01

Full Text Available In this study, we analyze FORMOSAT-3/COSMIC (F3/C GPS radio occultation (RO derived temperature components for the period September 2006 to February 2008. Results show the presence of slow Kelvin waves (wave period > 10 days with higher zonal wavenumbers (either one or two in the upper troposphere and lower stratosphere (UTLS. The vertical wavelengths of these waves are found to be in the range of 5 - 12 km. The predominant Kelvin waves observed in the temperature fluctuations are in the altitude range between 15 and 28 km and centered on the tropical tropopause. The downward phase progression of these waves suggests that the derived waves are propagating upward, with the source region located at lower altitudes possibly due to tropical convective heating. The zonal winds retrieved using radiosonde observations over Singapore (1¢XN, 104¢XE during this period show a periodicity of ~24 - 26 months in the stratosphere, and quasi-biennial oscillation (QBO characteristics with eastward zonal winds from March 2006 to May 2007 and westward winds from June 2007 to July 2008 respectively. Our results further show that the Kelvin wave characteristics are enhanced during the westward phase of QBO and diminish during the eastward phase, in line with the previous reported results. Furthermore, an examination of outgoing longwave radiation (OLR data shows that deep convection activity is developed episodically over the Indonesian archipelago during the observation period, thereby indicating that the Kelvin wave events observed in temperature fluctuations are either driven by convective activity (convectively coupled waves or by a broad spectrum of convective variability (free waves over the Indonesian region.

Study of storm surge trends in typhoon-prone coastal areas based on observations and surge-wave coupled simulations

Science.gov (United States)

Feng, Xingru; Li, Mingjie; Yin, Baoshu; Yang, Dezhou; Yang, Hongwei

2018-06-01

This is a study of the storm surge trends in some of the typhoon-prone coastal areas of China. An unstructured-grid, storm surge-wave-tide coupled model was established for the coastal areas of Zhejiang, Fujian and Guangdong provinces. The coupled model has a high resolution in coastal areas, and the simulated results compared well with the in situ observations and satellite altimeter data. The typhoon-induced storm surges along the coast of the study areas were simulated based on the established coupled model for the past 20 years (1997-2016). The simulated results were used to analyze the trends of the storm surges in the study area. The extreme storm surge trends along the central coast of Fujian Province reached up to 0.06 m/y, significant at the 90% confidence level. The duration of the storm surges greater than 1.0 and 0.7 m had an increasing trend along the coastal area of northern Fujian Province, significant at confidence levels of 70%-91%. The simulated trends of the extreme storm surges were also validated by observations from two tide gauge stations. Further studies show that the correlation coefficient (RTE) between the duration of the storm surge greater than 1 m and the annual ENSO index can reach as high as 0.62, significant at the 99% confidence level. This occurred in a location where the storm surge trend was not significant. For the areas with significant increasing storm surge trends, RTE was small and not significant. This study identified the storm surge trends for the full complex coastline of the study area. These results are useful both for coastal management by the government and for coastal engineering design.

Low temperature specific heat of the spin-density-wave compound (TMTSF)2PF6

DEFF Research Database (Denmark)

Odin, J.; Lasjaunias, J.C.; Biljakovic, K.

1994-01-01

We report on specific heat measurements of the SDW compound (TMTSF)2PF6 between 2 and 25 K, performed by two different techniques. We discuss the two successive transitions which occur in this T-range : the SDW ordering transition at T = 12.1 K, and a glass transition around-3-3.5 K. The latter i...... is very dependent on the kinetics of measurements, and has all characteristic features of freezing of supercooled liquids....

Galvanomagnetic properties of atomically disordered compounds YBa2Cu3O7

International Nuclear Information System (INIS)

Kar'kin, A.E.; Goshchitskij, B.N.

2001-01-01

To clarify the peculiarities of the metal-dielectric transition (MDT) in the HTSC type compounds one investigated into the galvanomagnetic properties of YBa 2 Cu 3 O 7 polycrystalline specimens irradiated by fast neutrons under 80 K temperature with F = 2x10 19 cm -2 fluence and subsequent to their exposure to the isochronal annealings within 150-390 K temperature range. It was determined that temperature dependences of R H Hall coefficient and of MR magnetic resistances of YBa 2 Cu 3 O 7 polycrystalline compounds disordered by fast neutrons retained the anomalous properties peculiar to the HTSC type disordered compounds in spite of the fact that conductivity was not a metallic one. This behavior is explained by the fact that in the disordered compounds there are two co-existing electron phases with conductivity as to the localized and the metallic states. Concentration of metallic phase is lower than threshold of passing, that is why, conductivity of this system is of dielectric type while R H and MR have temperature dependences similar to metallic phase that are renormalized by magnitude [ru

Spin wave and percolation studies in epitaxial La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films grown by pulsed laser deposition

Energy Technology Data Exchange (ETDEWEB)

Ettayfi, A. [LPMMAT, Faculté des Sciences Ain chock, Université Hassan II de Casablanca, B.P. 5366 Casablanca (Morocco); Moubah, R., E-mail: reda.moubah@hotmail.fr [LPMMAT, Faculté des Sciences Ain chock, Université Hassan II de Casablanca, B.P. 5366 Casablanca (Morocco); Hlil, E.K. [Institut Néel, CNRS, Université Joseph Fourier, BP 166, 38042 Grenoble Cedex 9 (France); Colis, S.; Lenertz, M.; Dinia, A. [Institut de Physique et Chimie des Matériaux de Strasbourg (IPCMS), UMR 7504 UDS-CNRS (UDS-ECPM), 23 rue du Loess, BP 43, F-67034 Strasbourg Cedex 2 (France); Lassri, H. [LPMMAT, Faculté des Sciences Ain chock, Université Hassan II de Casablanca, B.P. 5366 Casablanca (Morocco)

2016-07-01

We investigate the magnetic and transport properties of high quality La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films grown by pulsed laser deposition. X-ray diffraction shows that the deposited films are epitaxial with the expected pseudo-cubic structure. Using the spin wave theory, the temperature dependence of magnetization was satisfactory modeled at low temperature, in which several fundamental magnetic parameters were obtained (spin wave stiffness, exchange constants, Fermi wave-vector, Mn–Mn interatomic distance). The transport properties were studied via the temperature dependence of electrical resistivity [ρ(T)], which shows a peak at Curie temperature due to metal to insulator transition. The percolation theory was used to simulate ρ(T) in both the ferromagnetic and paramagnetic phases. Reasonable agreement with the experimental data is reported. - Highlights: • The magnetic and transport properties of epitaxial La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films are investigated. • The M(T) curve was modeled at low temperature, and several magnetic parameters were obtained using spin wave theory. • The percolation theory was used to simulate ρ(T) in both the ferromagnetic and paramagnetic phases.

Charge Density Wave in the New Polymorphs of RE ₂ Ru ₃ Ge ₅ ( RE = Pr, Sm, Dy)

Energy Technology Data Exchange (ETDEWEB)

Bugaris, Daniel E.; Malliakas, Christos D.; Han, Fei; Calta, Nicholas P.; Sturza, Mihai; Krogstad, Matthew J.; Osborn, Raymond; Rosenkranz, Stephan; Ruff, Jacob P. C.; Trimarchi, Giancarlo; Bud’ko, Sergey L.; Balasubramanian, Mahalingam; Chung, Duck Young; Kanatzidis, Mercouri G.

2017-02-16

A new polymorph of the RE₂Ru₃Ge₅ (RE = Pr, Sm, Dy) compounds has been grown as single crystals via an indium flux. These compounds crystallize in tetragonal space group P4/mnc with the Sc₂Fe₃Si₅-type structure, having lattice parameters a = 11.020(2) Å and c = 5.853(1) Å for RE = Pr, a = 10.982(2) Å and c = 5.777(1) Å for RE = Sm, and a = 10.927(2) Å and c = 5.697(1) Å for RE = Dy. These materials exhibit a structural transition at low temperature, which is attributed to an apparent charge density wave (CDW). Both the high-temperature average crystal structure and the low-temperature incommensurately modulated crystal structure (for Sm₂Ru₃Ge₅ as a representative) have been solved. The charge density wave order is manifested by periodic distortions of the onedimensional zigzag Ge chains. From X-ray diffraction, charge transport (electrical resistivity, Hall effect, magnetoresistance), magnetic measurements, and heat capacity, the ordering temperatures (T_CDW) observed in the Pr and Sm analogues are ~200 and ~175 K, respectively. The charge transport measurement results indicate an electronic state transition happening simultaneously with the CDW transition. X-ray absorption near-edge spectroscopy (XANES) and electronic band structure results are also reported.

Ionothermal synthesis and structural transformation targeted by ion exchange in metal-1,3,5-benzenetricarboxylate compounds

Energy Technology Data Exchange (ETDEWEB)

Xu, Qing-Qing [Key Laboratory of Macromolecular Science of Shaanxi Province, School of Chemistry & Chemical Engineering, Shaanxi Normal University, Xi’an 710062, Shaanxi (China); State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Liu, Bing [College of Chemistry and Chemical Engineering, Shaanxi University of Sciences and Technology, Xi’an 710021, Shaanxi (China); Xu, Ling, E-mail: xuling@snnu.edu.cn [Key Laboratory of Macromolecular Science of Shaanxi Province, School of Chemistry & Chemical Engineering, Shaanxi Normal University, Xi’an 710062, Shaanxi (China); Jiao, Huan, E-mail: jiaohuan@snnu.edu.cn [Key Laboratory of Macromolecular Science of Shaanxi Province, School of Chemistry & Chemical Engineering, Shaanxi Normal University, Xi’an 710062, Shaanxi (China)

2017-03-15

Ionothermal reactions of 1,3,5-benzenetricarboxylate acid (H{sub 3}BTC) and Ni(NO{sub 3}){sub 2}, Co(NO{sub 3}){sub 2} and Cu(NO{sub 3}){sub 2} gave two discrete 32-membered ring-like allomers, [M{sub 2}(HBTC){sub 2}(NH{sub 2}CONH{sub 2}){sub 2}(H{sub 2}O){sub 4}]·3H{sub 2}O (M=Ni(1), Co(2)) and one layered [Cu{sub 2}(BTC)Cl(H{sub 2}O){sub 4}] (3). The weak interactions in 1 can be deconstructed to some degree in ion exchange by exploring the factors of divalent and trivalent metal species, metal concentration and soaking time, which are demonstrated by PXRD and N{sub 2} absorption. Cu{sup 2+} has the highest N{sub 2} adsorbance when soaking with 1, and 1 can keep structure stable when Cu{sup 2+} below 0.16 mol L{sup −1} and the soaking time within 24d. As Cu{sup 2+} beyond 0.16 mol L{sup −1} and the soaking time beyond 24d, the structure of compound 1 starts to transform with the crystal morphology from clear pale green to opaque blue. Ionothermal reactions of compound 1 with different Cu{sup 2+} amounts obtained Ni{sup 2+}-Cu{sup 2+} hetero complexes, whose PXRD patterns are similar to that of 3 and EDS indicates Cu{sup 2+}% increases with Cu{sup 2+} additions and close to 100% as Cu{sup 2+} being 1.6 mmol. It suggests that 3 is a controlled product and Cu{sup 2+} can transform discrete compound 1 into 2D compound 3. - Graphical abstract: Three compounds were synthesized through ionothermal reactions. The weak interactions in compound 1 can be deconstructed by ion exchange and discrete compound 1 can be transformed into layered compound 3. - Highlights: • Two discrete ring-like and one layered compounds were ionothermally synthesized. • Metal species, metal concentration and soaking time deconstruct the H-bondings in 1. • 1 can be transformed to 3 through ionothermal reaction, otherwise forbidden.

Application of two bacterial strains for wastewater bioremediation and assessment of phenolics biodegradation.

Science.gov (United States)

Paisio, Cintia E; Quevedo, María R; Talano, Melina A; González, Paola S; Agostini, Elizabeth

2014-08-01

The use of native bacteria is a useful strategy to decontaminate industrial effluents. In this work, two bacterial strains isolated from polluted environments constitutes a promising alternative since they were able to remove several phenolic compounds not only from synthetic solutions but also from effluents derived from a chemical industry and a tannery which are complex matrices. Acinetobacter sp. RTE 1.4 showed ability to completely remove 2-methoxyphenol (1000 mg/L) while Rhodococcus sp. CS 1 not only degrade the same concentration of this compound but also removed 4- chlorophenol, 2,4-dichlorophenol and pentachlorophenol with high efficiency. Moreover, both bacteria degraded phenols naturally present or even exogenously added at high concentrations in effluents from the chemical industry and a tannery in short time (up to 5 d). In addition, a significant reduction of biological oxygen demand and chemical oxygen demand values was achieved after 7 d of treatment for both effluents using Acinetobacter sp. RTE 1.4 and Rhodococcus sp. CS1, respectively. These results showed that Acinetobacter sp. RTE1.4 and Rhodococcus sp. CS 1 might be considered as useful biotechnological tools for an efficient treatment of different effluents, since they showed wide versatility to detoxify these complex matrices, even supplemented with high phenol concentrations.

Diffusion, capture and recycling of SCAR/WAVE and Arp2/3 complexes observed in cells by single-molecule imaging

Science.gov (United States)

Millius, Arthur; Watanabe, Naoki; Weiner, Orion D.

2012-01-01

The SCAR/WAVE complex drives lamellipodium formation by enhancing actin nucleation by the Arp2/3 complex. Phosphoinositides and Rac activate the SCAR/WAVE complex, but how SCAR/WAVE and Arp2/3 complexes converge at sites of nucleation is unknown. We analyzed the single-molecule dynamics of WAVE2 and p40 (subunits of the SCAR/WAVE and Arp2/3 complexes, respectively) in XTC cells. We observed lateral diffusion of both proteins and captured the transition of p40 from diffusion to network incorporation. These results suggest that a diffusive 2D search facilitates binding of the Arp2/3 complex to actin filaments necessary for nucleation. After nucleation, the Arp2/3 complex integrates into the actin network and undergoes retrograde flow, which results in its broad distribution throughout the lamellipodium. By contrast, the SCAR/WAVE complex is more restricted to the cell periphery. However, with single-molecule imaging, we also observed WAVE2 molecules undergoing retrograde motion. WAVE2 and p40 have nearly identical speeds, lifetimes and sites of network incorporation. Inhibition of actin retrograde flow does not prevent WAVE2 association and disassociation with the membrane but does inhibit WAVE2 removal from the actin cortex. Our results suggest that membrane binding and diffusion expedites the recruitment of nucleation factors to a nucleation site independent of actin assembly, but after network incorporation, ongoing actin polymerization facilitates recycling of SCAR/WAVE and Arp2/3 complexes. PMID:22349699

Rogue waves and lump solutions for a (3+1)-dimensional generalized B-type Kadomtsev-Petviashvili equation in fluid mechanics

Science.gov (United States)

Wu, Xiao-Yu; Tian, Bo; Chai, Han-Peng; Sun, Yan

2017-08-01

Under investigation in this letter is a (3+1)-dimensional generalized B-type Kadomtsev-Petviashvili equation, which describes the weakly dispersive waves propagating in a fluid. Employing the Hirota method and symbolic computation, we obtain the lump, breather-wave and rogue-wave solutions under certain constraints. We graphically study the lump waves with the influence of the parameters h1, h3 and h5 which are all the real constants: When h1 increases, amplitude of the lump wave increases, and location of the peak moves; when h3 increases, lump wave’s amplitude decreases, but location of the peak keeps unchanged; when h5 changes, lump wave’s peak location moves, but amplitude keeps unchanged. Breather waves and rogue waves are displayed: Rogue waves emerge when the periods of the breather waves go to the infinity.

Mixed valence and metamagnetism in a metal flux grown compound Eu2Pt3Si5

International Nuclear Information System (INIS)

Sarkar, Sumanta; Subbarao, Udumula; Joseph, Boby; Peter, Sebastian C.

2015-01-01

A new compound Eu 2 Pt 3 Si 5 with plate shaped morphology has been grown from excess In flux. The compound crystallizes in the orthorhombic U 2 Co 3 Si 5 structure type, Ibam space group and the lattice parameters are a=10.007(2) Å, b=11.666(2) Å and c=6.0011(12) Å. The crystal structure of this compound can be conceived as inter-twinned chains of [Pt 2 Si 2 ] and [PtSi 3 ] tetrahedra connected along [100] direction to give rise to a complex three dimensional [Pt 3 Si 5 ] network. Temperature dependent magnetic susceptibility data suggests that Eu 2 Pt 3 Si 5 undergoes a strong antiferromagnetic ordering (T N =19 K) followed by a weak ferromagnetic transition (T C =5.5 K). The effective magnetic moment/Eu obtained from susceptibility data is 6.78 μ B accounts mixed valent Eu with almost 85% divalent Eu, which is supported by X-ray absorption near edge spectroscopy. The compound undergoes a metamagnetic transition under applied magnetic field through a probable spin flop mechanism. - Graphical abstract: Eu 2 Pt 3 Si 5 , a new member in the U 2 Co 3 Si 5 (Ibam) family undergoes metamagnetic transition at high magnetic field and Eu is in mixed valence state. - Highlights: • A new compound Eu 2 Pt 3 Si 5 has been synthesized using indium as an inactive metal flux. • The compound undergoes metamagnetic transition at higher field. • Eu in this compound resides in a mixed valence state

Crystal and magnetic structure of TbFe{sub 0.25}Ge{sub 2} compound

Energy Technology Data Exchange (ETDEWEB)

Gil, A., E-mail: a.gil@ajd.czest.pl [Faculty of Mathematics and Natural Sciences, Jan Długosz University in Częstochowa, Armii Krajowej 13/15, 42-200 Częstochowa (Poland); Hoser, A. [Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner-Platz 1, 14-109 Berlin (Germany); Penc, B.; Szytuła, A. [M. Smoluchowski Institute of Physics, Jagiellonian University, Reymonta 4, 30-059 Kraków (Poland)

2013-10-15

The crystal and magnetic structure of polycrystalline TbFe{sub 0.25}Ge{sub 2} sample have been determined. X-ray and neutron diffraction studies indicate that this compound has the orthorhombic CeNiSi{sub 2}-type crystal structure (space group Cmcm). The magnetic ordering, based on the neutron diffraction data in low temperature, is described by two components: a collinear antiferromagnetic G-type and a cosine-wave modulated one. In the collinear G-type structure the Tb magnetic moment is equal to 3.81(5) µ{sub B} and it is parallel to the c-axis. The modulated structure is described by the propagation vector k=(0.460(8), 0, 0.305(1)), the Tb magnetic moment equals 7.75(8) µ{sub B,} lies in b–c and forms an angle 23(2)° with the c-axis. The collinear component decreases to zero at 22.6 K while the modulated one at 190.8 K. - Highlights: • We determine crystal and magnetic structure of TbFe{sub 0.25}Ge{sub 2} compound. • We compare the results with other TbT{sub x}Ge{sub 2} compounds. • We observe the complex magnetic structure in TbFe{sub 0.25}Ge{sub 2} with two components: collinear and cosine-wave modulated. • T (3d) element have got significant influence on the interactions in Tb sublattice.

Four-body wave function of π3He-system at the threshold energy

International Nuclear Information System (INIS)

Pupyshev, V.V.; Rakityanskij, S.A.

1985-01-01

On the basis of approximate four-body equations the wave function of π 3 He-system is calculated at zero kinetic energy of the pion. In the case when distances between all four particles are comparable with the nucleus size a strong distortion of the wave function of (3N)-subsystem caused by the presence of the pion is found. The calculated four-body function is represented in a semianalytical form, which makes it possible to apply it in different calculations

GPM GROUND VALIDATION CONICAL SCANNING MILLIMETER-WAVE IMAGING RADIOMETER (COSMIR) MC3E V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Conical Scanning Millimeter-wave Imaging Radiometer (COSMIR) MC3E dataset used the Conical Scanning Millimeter-wave Imaging Radiometer...

Thermoelectric properties of quaternary (Bi,Sb)2(Te,Se)3 compound

International Nuclear Information System (INIS)

Lu, Pengfei; Li, Yiluan; Wu, Chengjie; Yu, Zhongyuan; Cao, Huawei; Zhang, Xianlong; Cai, Ningning; Zhong, Xuxia; Wang, Shumin

2014-01-01

Highlights: • Sb and Se spin–orbit coupling play a key role in the band structure. • Substituted Bi/Sb and Te/Se have a limited impact on the transport coefficients. • n-Type doping will be preferred for quaternary (Bi,Sb) 2 (Te,Se) 3 compound. -- Abstract: The quaternary (Bi,Sb) 2 (Te,Se) 3 compounds are investigated using first-principles study and Boltzmann transport theory. The energy band structure and density of states are studied in detail. The electronic transport coefficients are then calculated as a function of chemical potential. The figure of merit ZT is obtained assuming a constant relaxation time and an averaged thermal conductivity. Our theoretical result agrees well with previous experimental data

Synthesis and antiproliferative activity of novel polynuclear heterocyclic compounds derived from 2,3-diaminophenazine.

Science.gov (United States)

Mahran, Asma M; Ragab, Sherif Sh; Hashem, Ahmed I; Ali, Mamdouh M; Nada, Afaf A

2015-01-27

2,3-Diaminophenazine 1 was used as a precursor for the preparation of some novel phenazine derivatives such as imidazo[4,5-b]phenazine-2-thione 2, its methylthio 3, ethyl 1-aryl-3H-[1,2,4]triazolo[2,3-a]imidazo[4,5-b]phenazines 8a-c, ethyl (2Z)-[3-aminophenazin-2-yl)amino](phenylhydrazono)ethanoate 9, pyrazino[2,3-b]phenazine derivatives 10, 12, 15-17, [1,4]diazepino[2,3-b]phenazine derivatives 13, 14, 2,3-dibenzoylaminophenazine 18, 1H-Imidazo[4,5-b]phenazine derivatives 20, 23a-c, 24, 25 and 4-[(E)-(3-amino phenazin-2-yl)diazenyl] derivatives 27-29. All compounds were tested as inhibitors of the proliferation of human lung carcinoma and colorectal cancer cell lines through inhibition of Tyrosine Kinases. Most of compounds exert good activity against the two cancer cell lines. Five compounds (1, 2, 3, 25 and 28) were found to possess the same activity as the standard drug Cisplatin. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Quark compound Bag model for NN scattering up to 1 GeV

International Nuclear Information System (INIS)

Fasano, C.; Lee, T.S.H.

1987-01-01

A Quark Compound Bag model has been constructed to describe NN s-wave scattering up to 1 GeV. The model contains a vertex interaction H/sub D/leftrightarrow/NN/ for describing the excitation of a confined six-quark Bag state, and a meson-exchange interaction obtained from modifying the phenomenological core of the Paris potential. Explicit formalisms and numerical results are presented to reveal the role of the Bag excitation mechanism in determining the relative wave function, P- and S-matrix of NN scattering. We explore the merit as well as the shortcoming of the Quark Compound Bag model developed by the ITEP group. It is shown that the parameters of the vertex interaction H/sub D/leftrightarrow/NN/ can be more rigorously determined from the data if the notation of the Chiral/Cloudy Bag model is used to allow the presence of the background meson-exchange interaction inside Bag excitation region. The application of the model in the study of quark degrees of freedom in nuclei is discussed. 41 refs., 6 figs., 3 tabs

New aspects of whistler waves driven by an electron beam studied by a 3-D electromagnetic code

Science.gov (United States)

Nishikawa, Ken-Ichi; Buneman, Oscar; Neubert, Torsten

1994-01-01

We have restudied electron beam driven whistler waves with a 3-D electromagnetic particle code. The simulation results show electromagnetic whistler wave emissions and electrostatic beam modes like those observed in the Spacelab 2 electron beam experiment. It has been suggested in the past that the spatial bunching of beam electrons associated with the beam mode may directly generate whistler waves. However, the simulation results indicate several inconsistencies with this picture: (1) whistler waves continue to be generated even after the beam mode space charge modulation looses its coherence, (2) the parallel (to the background magnetic field) wavelength of the whistler wave is longer than that of the beam instability, and (3) the parallel phase velocity of the whistler wave is smaller than that of the beam mode. The complex structure of the whistler waves in the vicinity of the beam suggest that the transverse motion (gyration) of the beam and background electrons is also involved in the generation of whistler waves.

Recent advances in the 5f-relevant electronic states and unconventional superconductivity of actinide compounds

International Nuclear Information System (INIS)

Haga, Yoshinori; Sakai, Hironori; Kambe, Shinsaku

2007-01-01

Recent advances in the understanding of the 5f-relevant electronic states and unconventional superconducting properties are reviewed in actinide compounds of UPd 2 Al 3 . UPt 3 , URu 2 Si 2 , UGe 2 , and PuRhGa 5 . These are based on the experimental results carried out on high-quality single crystal samples, including transuranium compounds, which were grown by using combined techniques. The paring state and the gap structure of these superconductors are discussed, especially for the corresponding Fermi surfaces which were clarified by the de Haas-van Alphen experiment and the energy band calculations. A detailed systematic study using the NQR/NMR spectroscopy reveals the d-wave superconductivity in PuRhGa 5 and the difference of magnetic excitations due to the difference of ground states in U-, Np-, and Pu-based AnTGa 5 (T: transition metal) compounds. (author)

Magnetic properties and magnetocaloric effect of HoCo3B2 compound

Science.gov (United States)

Zheng, X. Q.; Xu, J. W.; Zhang, H.; Zhang, J. Y.; Wang, S. G.; Zhang, Y.; Xu, Z. Y.; Wang, L. C.; Shen, B. G.

2018-05-01

A sample of HoCo3B2 compound was synthesized, and the magnetic and MCE properties were investigated. Compound shows a change corresponding to R-R (R = rare earth) sublattice magnetic order transition and the transition temperature is determined to be 11.8 K (TC). The characteristic of Arrott plots with positive slope around TC was observed, indicating a second-order phase transition. Based on isothermal magnetization data, together with Maxwell's relationship, the magnetic entropy change (-ΔSM) was calculated. The maximum -ΔSM reaches 7.8, 12.7 and 14.4 J/kg K for field range of 0-2 T, 0-5 T and 0-7 T, respectively. Accordingly, the value of RC (refrigerant capacity) is 99, 289 and 432 J/kg for above field ranges. The large MCE of HoCo3B2 compound indicates its potential application for magnetic refrigeration in low temperature range.

Geothermal exploration in the German Molasse Basin - Supplementary exploration using integrated 3-component data and shear wave measurements

Science.gov (United States)

Wawerzinek, Britta; Buness, Hermann; Lüschen, Ewald; Thomas, Rüdiger

2017-04-01

To establish a dense area-wide network of geothermal facilities, the Stadtwerke München initiated the joint research project GRAME together with the Leibniz Institute for Applied Geophysics (GeoParaMoL*). As a database for the project, a 3D seismic survey was acquired from November 1015 to March 2016 and covers 170 km2 of the southern part of Munich. 3D seismic exploration is a well-established method to explore geothermal reservoirs, and its value for reservoir characterization of the Malm has been proven by several projects. A particular challenge often is the determination of geophysical parameters for facies interpretation without any borehole information, which is needed for calibration. A new approach to facilitate a reliable interpretation is to include shear waves in the interpretation workflow, which helps to tie down the range of lithological and petrophysical parameters. Shear wave measurements were conducted during the regular 3D seismic survey in Munich. In a passive experiment, the survey was additionally recorded on 467 single, 3-component (3C), digital receivers that were deployed along one main line (15 km length) and two crosslines (4 km length). In this way another 3D P-wave as well as a 3D shear wave dataset were acquired. In the active shear wave experiment the SHOVER technique (Edelmann, 1981) was applied to directly excite shear waves using standard vertical vibrators. The 3C recordings of both datasets show, in addition to the P-wave reflections on the vertical component, clear shear-wave signals on the horizontal components. The structural image of the P-waves recorded on the vertical component of the 3C receivers displays clear reflectors within the Molasse Basin down to the Malm and correlates well with the structural image of the regular survey. Taking into account a travel time ratio of 1.6 the reflection patterns of horizontal and vertical components approximately coincide. This indicates that Molasse sediments and the Malm can also

An efficient flexible-order model for 3D nonlinear water waves

Science.gov (United States)

Engsig-Karup, A. P.; Bingham, H. B.; Lindberg, O.

2009-04-01

The flexible-order, finite difference based fully nonlinear potential flow model described in [H.B. Bingham, H. Zhang, On the accuracy of finite difference solutions for nonlinear water waves, J. Eng. Math. 58 (2007) 211-228] is extended to three dimensions (3D). In order to obtain an optimal scaling of the solution effort multigrid is employed to precondition a GMRES iterative solution of the discretized Laplace problem. A robust multigrid method based on Gauss-Seidel smoothing is found to require special treatment of the boundary conditions along solid boundaries, and in particular on the sea bottom. A new discretization scheme using one layer of grid points outside the fluid domain is presented and shown to provide convergent solutions over the full physical and discrete parameter space of interest. Linear analysis of the fundamental properties of the scheme with respect to accuracy, robustness and energy conservation are presented together with demonstrations of grid independent iteration count and optimal scaling of the solution effort. Calculations are made for 3D nonlinear wave problems for steep nonlinear waves and a shoaling problem which show good agreement with experimental measurements and other calculations from the literature.

An efficient flexible-order model for 3D nonlinear water waves

International Nuclear Information System (INIS)

Engsig-Karup, A.P.; Bingham, H.B.; Lindberg, O.

2009-01-01

The flexible-order, finite difference based fully nonlinear potential flow model described in [H.B. Bingham, H. Zhang, On the accuracy of finite difference solutions for nonlinear water waves, J. Eng. Math. 58 (2007) 211-228] is extended to three dimensions (3D). In order to obtain an optimal scaling of the solution effort multigrid is employed to precondition a GMRES iterative solution of the discretized Laplace problem. A robust multigrid method based on Gauss-Seidel smoothing is found to require special treatment of the boundary conditions along solid boundaries, and in particular on the sea bottom. A new discretization scheme using one layer of grid points outside the fluid domain is presented and shown to provide convergent solutions over the full physical and discrete parameter space of interest. Linear analysis of the fundamental properties of the scheme with respect to accuracy, robustness and energy conservation are presented together with demonstrations of grid independent iteration count and optimal scaling of the solution effort. Calculations are made for 3D nonlinear wave problems for steep nonlinear waves and a shoaling problem which show good agreement with experimental measurements and other calculations from the literature

Terahertz wave parametric oscillations at polariton resonance using a MgO:LiNbO3 crystal.

Science.gov (United States)

Li, Zhongyang; Bing, Pibin; Yuan, Sheng; Xu, Degang; Yao, Jianquan

2015-06-20

Terahertz wave (THz-wave) parametric oscillations with a noncollinear phase-matching scheme at polariton resonance using a MgO:LiNbO3 crystal with a surface-emitted configuration are investigated. We investigate frequency tuning characteristics of a THz-wave via varying the wavelength of the pump wave and phase-matching angle. The effective parametric gain length under the noncollinear phase-matching condition is calculated. Parametric gain and absorption characteristics of a THz-wave in the vicinity of polariton resonances are analyzed.

Electromagnetic waves with frequencies near the local proton gyrofrequency: ISEE-3 1 AU observations

Science.gov (United States)

Tsurutani, Bruce T.; Arballo, John K.; Mok, John; Smith, Edward J.; Mason, Glenn M.; Tan, Lun C.

1994-01-01

Low Frequency (LF) electromagnetic waves with periods near the local proton gyrofrequency have been detected in interplanetary space by the magnetometer onboard International-Sun-Earth-Explorer-3 (ISEE-3). Transverse peak-to-peak amplitudes as large as delta vector B/absolute value of B approximately 0.4 have been noted with compressional components (Delta absolute value of B/absolute value of B) typically less than or = 0.1. Generally, the waves have even smaller amplitudes, or are not detectable within the solar wind turbulence. The waves are elliptically/linearly polarized and are often, but not always, found to propagate nearly along vector B(sub zero). Both right- and left-hand polarizations in the spacecraft-frame have been detected. The waves are observed during all orientations of the interplanetary magnetic field, with the Parker spiral orientation being the most common case. Because the waves are detected at and near the local proton cyclotron frequency, the generation mechanism must almost certainly be solar wind pickup of freshly created hydrogen ions. Possible sources for the hydrogen are the Earth's atmosphere, coronal mass ejections from the Sun, comets and interstellar neutral atoms. At this time it is not obvious which potential source is the correct one. Statistical tests employing over one year of ISEE-3 data will be done in the near future to eliminate/confirm some of these possibilities.

Synthesis, Half-Wave Potentials and Antiproliferative Activity of 1-Aryl-substituted Aminoisoquinolinequinones

Directory of Open Access Journals (Sweden)

Juana Andrea Ibacache

2014-01-01

Full Text Available The synthesis of a variety of 1-aryl-7-phenylaminoisoquinolinequinones from 1,4-benzoquinone and arylaldehydes via the respective 1-arylisoquinolinequinones is reported. The cyclic voltammograms of the new compounds exhibit two one-electron reduction waves to the corresponding radical-anion and dianion and two quasi-reversible oxidation peaks. The half-wave potential values (EI½ of the members of the series have proven sensitive to the electron-donor effect of the aryl group (phenyl, 2-thienyl, 2-furyl at the 1-position as well as to the phenylamino groups (anilino, p-anisidino at the 7-position. The antiproliferative activity of the new compounds was evaluated in vitro using the MTT colorimetric method against one normal cell line (MRC-5 lung fibroblasts and two human cancer cell lines: AGS human gastric adenocarcinoma and HL-60 human promyelocytic leukemia cells in 72-h drug exposure assays. Among the series, compounds 5a, 5b, 5g, 5h, 6a and 6d exhibited interesting antiproliferative activities against human gastric adenocarcinoma. The 1-arylisoquinolinequinone 6a was found to be the most promising active compound against the tested cancer cell lines in terms of IC50 values (1.19; 1.24 µM and selectivity index (IS: 3.08; 2.96, respect to the anti-cancer agent etoposide used as reference (IS: 0.57; 0.14.

Prevalence of Staphylococcal Enterotoxins in Ready-to-Eat Foods Sold in Istanbul.

Science.gov (United States)

Ulusoy, Beyza H; Çakmak Sancar, Burcu; Öztürk, Muhsin

2017-10-01

The aim of this study was to investigate the prevalence of staphylococcal enterotoxins (SEs) in ready-to-eat (RTE) foods sold in Istanbul, Turkey. A total of 5,241 samples were randomly collected from various caterers, hotels, and restaurants from 2014 to 2016. The samples were classified into four groups: (i) various cooked RTE meat and vegetable meals, (ii) various RTE salads, charcuterie, and cold appetizers, (iii) various cooked RTE bakery products (pasta, pastries, pizza, pita, ravioli, etc.), and (iv) any cooked RTE sweets and desserts (pudding, custard, cream, ashura, etc.). The samples were examined for the presence of SEs by 3M Tecra Staph Enterotoxin Visual Immunoassay method, which is a manual enzyme-linked immunosorbent assay method. Among all samples, only 1 (0.019%) RTE meal (vegetable meal with meat) was found to be contaminated with SEs, a good result in terms of staphylococcal food poisoning risk and public health.

Thermodynamics of coproportionation reactions of homogeneous samarium (3) and yttrium (3) nitrates solvates with neutral organic phosphorus compounds

International Nuclear Information System (INIS)

Pyartman, A.K.

1995-01-01

Reaction heats of homogeneous samarium (3) and yttrium (3) nitrate solvates coproportionation with neutral organophosphoric compounds (tri-n.-butylphosphate, diisooctylmethylphosphonate, diisoamylmethylphosphonate) at T=298.15 K in hexane have been measured by thermochemical method. It has been ascertained that enthalpies of coproportionation reactions practically do not depend on the nature, concentration of rare earth metal (3) nitrate solvates in hexane, nature of neutral organophosphoric compound and constitute 1.1±-.2 kJ/mol. The Gibbs free energy of coproportionation reactions is -5.43 kJ/mol, while entropy of the reactions in 14.5±0.7 J/mol·K. 8 refs., 1 tab

Uptake and metabolism of [11-3H] all-trans retinoic acid by rabbit tracheal epithelial cells

International Nuclear Information System (INIS)

Bhat, P.V.; Jetten, A.M.

1986-01-01

Retinoic acid (RA) inhibits squamous cell differentiation of rabbit tracheal epithelial cells in culture at concentrations as low as 10 -9 - 10 -10 M. These cells take up 11-[ 3 H]-RA readily when added to the cells either as free RA or as RA complexed to serum retinol binding protein (SRBP) or albumin. The uptake of RA by RTE cells as SRBP or albumin complexes was significantly lower than that of free RA. Metabolites were analyzed by high pressure liquid chromatography. This analysis showed that RTE cells metabolized RA to polar metabolites (Peak I) and to a less polar metabolite (Peak III). The metabolite in Peak III constituted 13-20% of the cell-associated radioactivity after 24 hrs. incubation with RA. Formation of the Peak I and Peak III metabolites from RA was observed both in undifferentiated as well as in cells that underwent terminal differentiation to squamous cells and their synthesis appeared constitutive. When cells were treated for 6 hrs with 3 H-RA and then further in the absence of RA 75% of the cell-associated radioactivity was released in the medium within 24 hrs, thereafter the release was slow. Analysis of the metabolites secreted by the cells into the medium showed only the presence of Peak I metabolites. The authors data show that RTE cells metabolize RA into polar metabolites which are rapidly released into the medium and into a less polar metabolite, possibly an ester of retinoic acid, which is retained by the cell

Quality loss assessment in fish-based ready-to-eat foods during refrigerated storage

Energy Technology Data Exchange (ETDEWEB)

Pourashouri, P.; Chapela, M. J.; Atanassova, M.; Cabado, A. G.; Vieites, J. M.; Aubourg, S. P.

2013-05-01

The present research addresses the quality loss in two different ready-to-eat (RTE) sea foods. With this aim, chemical and microbiological parameters were measured in tuna lasagne (TL) and hake roe foods which were refrigerated (4 degree centigrade) for up to 35 and 71 days, respectively. Both foods showed a significant lipid oxidation (peroxide and interaction compound formation) development with storage time, which was especially marked in the case of the TL product, which also underwent an important lipid hydrolysis development. Both RTE products showed a low microbial development, no matter how much time had elapsed since the expiration dates; thus, low total viable count scores and volatile amine formation were attained while the presence of pathogen microorganisms was not detected. In view of the current increasing consumer demand for high quality refrigerated foods, the assessment of lipid damage related to nutritional and sensory values is recommended when fish-based RTE products are encountered. (Author) 46 refs.

Syntheses, structures, and physicochemical properties of diruthenium compounds of tetrachlorocatecholate with metal-metal bonded Ru(3+)(mu-OR)(2)Ru(3+) and Ru(3.5+)(mu-OR)(2)Ru(3.5+) cores (R = CH(3) and C(2)H(5)).

Science.gov (United States)

Miyasaka, H; Chang, H C; Mochizuki, K; Kitagawa, S

2001-07-02

.514(2) A for 4 and 5, respectively). These structural features and magnetic and ESR data revealed the electronic configurations of sigma(2)pi(2)delta(2)delta(2)pi(2) and sigma(2)pi(2)delta(2)delta(2)pi(1) for Ru(3+)(mu-OR)(2)Ru(3+) and Ru(3.5+)(mu-OR)(2)Ru(3.5+), respectively, in which the former is diamagnetic and the latter is paramagnetic with S = (1)/(2) ground state. Compound 5 forms a one-dimensional chain with alternating arrangement of a Ru(3.5+)(mu-OMe)(2)Ru(3.5+) unit and a free benzo-15-crown-5-ether molecule by intermolecular hydrogen bonds (O(H(2)O).O(crown-ether) = 2.91-3.04 A). The cyclic voltammetry in DMF affords characteristic metal-origin voltammograms; two reversible and two quasi-reversible redox waves were observed. The feature of cyclic voltammograms for the Ru(3+)(mu-OR)(2)Ru(3+) species (2, 3, and 6) and the Ru(3.5+)(mu-OR)(2)Ru(3.5+) species (4 and 7) are similar to each other, indicating that both species are electrochemically stable. The isolation of the pyrazine-trans-coordinated species, [Ph(4)P][Ru(Cl(4)Cat)(2)(L)(2)] (L = pyrazine (8), 2,5-dimethylpyrazine (9)), revealed the selective isolation of 6 from pyrazine-containing solution. UV-vis spectral variation by ethanolysis for 9 demonstrated the selective conversion from the pyrazine-trans-coordinated species to the Ru(3+)(mu-OEt)(2)Ru(3+) species without an oxidation to the Ru(3.5+)(mu-OEt)(2)Ru(3.5+) species. This result suggests the presence of equilibrium between [Ru(Cl(4)Cat)(2)(L)(2)](-) and Ru(3+)(mu-OEt)(2)Ru(3+) species in the synthetic condition for 6.

Pressure broadening measurement of submillimeter-wave lines of O3

International Nuclear Information System (INIS)

Yamada, M.M.; Amano, T.

2005-01-01

The pressure broadening coefficients and their temperature dependences for two submillimeter-wave transitions of ozone, one being monitored with Odin and the other to be monitored with JEM/SMILES and EOS-MLS, have been determined by using a BWO based submillimeter-wave spectrometer. The measurements have also been extended to one of the symmetric isotopic species, 16 O 18 O 16 O. The isotopic species is observed in natural abundance and as a consequence the temperature dependence is not determined due to weak signal intensity. The pressure broadening parameters are determined with better than 1% accuracy, while the temperature dependence exponents are obtained within 1.5-3% accuracy for the normal species transitions

Characterization of Volatile Compounds with HS-SPME from Oxidized n-3 PUFA Rich Oils via Rancimat Tests.

Science.gov (United States)

Yang, Kai-Min; Cheng, Ming-Ching; Chen, Chih-Wei; Tseng, Chin-Yin; Lin, Li-Yun; Chiang, Po-Yuan

2017-02-01

Algae oil and fish oil are n-3 PUFA mainstream commercial products. The various sources for the stability of n-3 PUFA oxidation are influenced by the fatty acid composition, extraction and refined processing. In this study, the oil stability index (OSI) occurs within 2.3 to 7.6 hours with three different n-3 PUFA rich oil. To set the OSI in the Rancimat test as the oil stability limit and observed various degrees of oxidation (0, 25, 50, 75, 100 and 125%). The volatile oxidation compounds were analyzed via headspace-solid phase microextraction (HS-SPME) and GC/MS. We detected 51 volatile compound variations during the oxidation, which were composed of aldehydes, hydrocarbons, cyclic compounds, alcohols, benzene compounds, ketones, furans, ester and pyrrolidine. The off-flavor characteristics can be strongly influenced by the synergy effects of volatile oxidation compounds. Chemometric analysis (PCA and AHC) was applied to identify the sensitive oxidation marker compounds, which included a (E,E)-2,4-heptadienal appropriate marker, via lipid oxidation in the n-3 PUFA rich oil.

Multi-view 3D echocardiography compounding based on feature consistency

Science.gov (United States)

Yao, Cheng; Simpson, John M.; Schaeffter, Tobias; Penney, Graeme P.

2011-09-01

Echocardiography (echo) is a widely available method to obtain images of the heart; however, echo can suffer due to the presence of artefacts, high noise and a restricted field of view. One method to overcome these limitations is to use multiple images, using the 'best' parts from each image to produce a higher quality 'compounded' image. This paper describes our compounding algorithm which specifically aims to reduce the effect of echo artefacts as well as improving the signal-to-noise ratio, contrast and extending the field of view. Our method weights image information based on a local feature coherence/consistency between all the overlapping images. Validation has been carried out using phantom, volunteer and patient datasets consisting of up to ten multi-view 3D images. Multiple sets of phantom images were acquired, some directly from the phantom surface, and others by imaging through hard and soft tissue mimicking material to degrade the image quality. Our compounding method is compared to the original, uncompounded echocardiography images, and to two basic statistical compounding methods (mean and maximum). Results show that our method is able to take a set of ten images, degraded by soft and hard tissue artefacts, and produce a compounded image of equivalent quality to images acquired directly from the phantom. Our method on phantom, volunteer and patient data achieves almost the same signal-to-noise improvement as the mean method, while simultaneously almost achieving the same contrast improvement as the maximum method. We show a statistically significant improvement in image quality by using an increased number of images (ten compared to five), and visual inspection studies by three clinicians showed very strong preference for our compounded volumes in terms of overall high image quality, large field of view, high endocardial border definition and low cavity noise.

Multi-view 3D echocardiography compounding based on feature consistency

International Nuclear Information System (INIS)

Yao Cheng; Schaeffter, Tobias; Penney, Graeme P; Simpson, John M

2011-01-01

Echocardiography (echo) is a widely available method to obtain images of the heart; however, echo can suffer due to the presence of artefacts, high noise and a restricted field of view. One method to overcome these limitations is to use multiple images, using the 'best' parts from each image to produce a higher quality 'compounded' image. This paper describes our compounding algorithm which specifically aims to reduce the effect of echo artefacts as well as improving the signal-to-noise ratio, contrast and extending the field of view. Our method weights image information based on a local feature coherence/consistency between all the overlapping images. Validation has been carried out using phantom, volunteer and patient datasets consisting of up to ten multi-view 3D images. Multiple sets of phantom images were acquired, some directly from the phantom surface, and others by imaging through hard and soft tissue mimicking material to degrade the image quality. Our compounding method is compared to the original, uncompounded echocardiography images, and to two basic statistical compounding methods (mean and maximum). Results show that our method is able to take a set of ten images, degraded by soft and hard tissue artefacts, and produce a compounded image of equivalent quality to images acquired directly from the phantom. Our method on phantom, volunteer and patient data achieves almost the same signal-to-noise improvement as the mean method, while simultaneously almost achieving the same contrast improvement as the maximum method. We show a statistically significant improvement in image quality by using an increased number of images (ten compared to five), and visual inspection studies by three clinicians showed very strong preference for our compounded volumes in terms of overall high image quality, large field of view, high endocardial border definition and low cavity noise.

Effect of logarithmic terms on the energy level and wave function of a dtμ system

International Nuclear Information System (INIS)

Zhen, Z.

1990-01-01

The effect of the logarithmic terms on the ground-state energy level and wave function of a dtμ system is investigated. No significant contribution of the logarithmic terms on either the energy level or wave function is found. At the same time, we find the lowest upper bound of the ground-state energy ever obtained by the variational method using the Hylleraas-type trial function and that the corresponding wave function satisfies the cusp condition as r dt →0 automatically to a reasonable accuracy for r<3 (muonic a.u.), where r is the distance between the fused dt nuclear compound and the muon

Efficient Wave Energy Amplification with Wave Reflectors

DEFF Research Database (Denmark)

Kramer, Morten Mejlhede; Frigaard, Peter Bak

2002-01-01

Wave Energy Converters (WEC's) extract wave energy from a limited area, often a single point or line even though the wave energy is generally spread out along the wave crest. By the use of wave reflectors (reflecting walls) the wave energy is effectively focused and increased to approximately 130......-140%. In the paper a procedure for calculating the efficiency and optimizing the geometry of wave reflectors are described, this by use of a 3D boundary element method. The calculations are verified by laboratory experiments and a very good agreement is found. The paper gives estimates of possible power benifit...... for different geometries of the wave reflectors and optimal geometrical design parameters are specified. On this basis inventors of WEC's can evaluate whether a specific WEC possible could benefit from wave reflectors....

Existence and Stability of Spatial Plane Waves for the Incompressible Navier-Stokes in R^3

Science.gov (United States)

Correia, Simão; Figueira, Mário

2018-03-01

We consider the three-dimensional incompressible Navier-Stokes equation on the whole space. We observe that this system admits a L^∞ family of global spatial plane wave solutions, which are connected with the two-dimensional equation. We then proceed to prove local well-posedness over a space which includes L^3(R^3) and these solutions. Finally, we prove L^3-stability of spatial plane waves, with no condition on their size.

Investigating Deep-Marine Sediment Waves in the Northern Gulf of Mexico Using 3D Seismic Data

Science.gov (United States)

Wang, Z.; Gani, M. R.

2016-12-01

Deep-water depositional elements have been studied for decades using outcrop, flume tank, sidescan sonar, and seismic data. Even though they have been well recognized by researchers, the improvements in the quality of 3D seismic data with increasingly larger dimension allow detailed analysis of deep-water depositional elements with new insights. This study focuses on the deep-marine sediment waves in the northern Gulf of Mexico. By interpreting a 3D seismic dataset covering 635 km2 at Mississippi Canyon and Viosca Knoll areas, large sediment waves, generated by sediment gravity flows, were mapped and analyzed with various seismic attributes. A succession of sediment waves, approximately 100 m in thickness, is observed on the marine slope that tapers out at the toe of the slope. The individual sediment wave exhibits up to 500 m in wavelength and up to 20 m in height. The wave crests oriented northeast-southwest are broadly aligned parallel to the regional slope-strike, indicating their sediment gravity flow origin. The crestlines are straight or slightly sinuous, with sinuosity increasing downslope. Their anti-dune patterns likely imply the presence of supercritical flows. The sediment waves have a retrogradational stacking pattern. Seismic amplitude maps of each sediment wave revealed that after depositing the majority of sheet-like sands on the upper slope, sediment gravity flows started to form large sediment waves on the lower slope. The steep and narrow upcurrent flanks of the sediment waves always display higher amplitudes than the gentle and wide downcurrent flanks, indicating that the sands were likely preferentially trapped along the upcurrent flanks, whereas the muds spread along the downcurrent flanks. The formation of sediment waves likely requires a moderate sand-mud ratio, as suggested by these observations: (1) absence of sediment waves on the upper slope where the sands were mainly deposited as unconfined sheets with a high sand-mud ratio; (2

Magnetic properties and magnetocaloric effect of HoCo3B2 compound

Directory of Open Access Journals (Sweden)

X. Q. Zheng

2018-05-01

Full Text Available A sample of HoCo3B2 compound was synthesized, and the magnetic and MCE properties were investigated. Compound shows a change corresponding to R-R (R = rare earth sublattice magnetic order transition and the transition temperature is determined to be 11.8 K (TC. The characteristic of Arrott plots with positive slope around TC was observed, indicating a second-order phase transition. Based on isothermal magnetization data, together with Maxwell’s relationship, the magnetic entropy change (-ΔSM was calculated. The maximum -ΔSM reaches 7.8, 12.7 and 14.4 J/kg K for field range of 0-2 T, 0-5 T and 0-7 T, respectively. Accordingly, the value of RC (refrigerant capacity is 99, 289 and 432 J/kg for above field ranges. The large MCE of HoCo3B2 compound indicates its potential application for magnetic refrigeration in low temperature range.

Preparing tomorrow's grid: RTE at the service of regions to support energy transition. Regional electric assessments - Stakes and key data

International Nuclear Information System (INIS)

2014-06-01

This document gathers a first one which presents the regional electric assessments and 21 regional reports. The presentation document briefly outlines the interdependency of regions, the diversity of regional situation in terms of electricity production and consumption, needs and ways to develop energy saving in order to reduce sensitivity to temperature, the evolution, objectives and contrasted results of the development of renewable energies, the investments and projects by RTE to develop and improve the grid. Regional reports propose maps and graphs and a synthesis of the evolution of electricity consumption, of the evolution of electricity consumption by industries, of the evolution of peak consumptions, of the evolution of consumption coverage by regional production, of the origin of electricity production (renewable thermal, photovoltaic, thermal fossil, hydraulic, nuclear), of the evolution of the various productions (renewable, hydraulic, thermal fossil, nuclear), of the evolution of the share of renewable energies, of the development of photovoltaic and wind installed power. They also present projects and investments, and propose maps of France indicating the level of consumption, the evolution of consumption between 2006 and 2013, the production/consumption rate of the different French regions and the energy exchanges between regions

Acoustic Pressure Waves in Vibrating 3-D Laminated Beam-Plate Enclosures

Directory of Open Access Journals (Sweden)

Charles A. Osheku

2009-01-01

Full Text Available The effect of structural vibration on the propagation of acoustic pressure waves through a cantilevered 3-D laminated beam-plate enclosure is investigated analytically. For this problem, a set of well-posed partial differential equations governing the vibroacoustic wave interaction phenomenon are formulated and matched for the various vibrating boundary surfaces. By employing integral transforms, a closed form analytical expression is computed suitable for vibroacoustic modeling, design analysis, and general aerospace defensive applications. The closed-form expression takes the form of a kernel of polynomials for acoustic pressure waves showing the influence of linear interface pressure variation across the axes of vibrating boundary surfaces. Simulated results demonstrate how the mode shapes and the associated natural frequencies can be easily computed. It is shown in this paper that acoustic pressure waves propagation are dynamically stable through laminated enclosures with progressive decrement in interfacial pressure distribution under the influence of high excitation frequencies irrespective of whether the induced flow is subsonic, sonic , supersonic, or hypersonic. Hence, in practice, dynamic stability of hypersonic aircrafts or jet airplanes can be further enhanced by replacing their noise transmission systems with laminated enclosures.

d-3He reaction measurements during fast wave minority heating in PLT

International Nuclear Information System (INIS)

Chrien, R.E.; Strachan, J.D.

1983-01-01

Time- and energy-resolved d- 3 He fusion reactions have been measured to infer the energy of the d + or He ++ minority ions heated near their cyclotron frequency by the magnetosonic fast wave. The average energy of the reacting 3 He ions during 3 He minority heating is in the range of 100 to 400 keV, as deduced from the magnitude of the reaction rate, its decay time, and the energy spread of the proton reaction products. The observed reaction rate and its scaling with wave power and electron density and temperature are in qualitative agreement with a radial reaction rate model using the minority distribution predicted from quasilinear velocity space diffusion. Oscillations in the reaction rate are observed concurrent with sawtooth and m = 2 MHD activity in the plasma

Leaky surface acoustic waves in Z-LiNbO3 substrates with epitaxial AIN overlays

International Nuclear Information System (INIS)

Bu, G.; Ciplys, D.; Shur, M.S.; Namkoong, G.; Doolittle, W.A.; Hunt, W.D.

2004-01-01

The properties of leaky surface acoustic waves (LSAW) in MBE grown AIN layer on Z-cut LiNbO 3 structures have been studied by numerical simulation and experimental measurements and compared with those of Rayleigh waves in the same structure. In the range of AIN layer thicknesses studied (0 3 substrate was essentially constant at around 4400 m/s. The measured electromechanical coupling coefficients (K 2 ) for the LSAW are roughly 1/4 of the predicted values, which might be due to the strong attenuation of the leaky wave unaccounted for during the parameter extraction. The thin AIN film slightly improved the measured temperature coefficient of frequency for the LSAW over that attained for the Z-cut, X-propagating LiNbO 3 substrate alone

Synthesis of a new compound - Sr2CuO2CO3

International Nuclear Information System (INIS)

Fomichev, D.V.; Khardanov, A.L.; Antipov, E.V.; Kovba, L.M.

1990-01-01

A new compound of Sr 2 CuO 2 CO 3 composition, being an intermediate product of solid phase synthesis in air in SrCo 3 -CuO system at T 2 CuO 2 CO 3 have low resistance at room temperature and semiconductor type conductivity

D5.3 Interaction between currents, wave, structure and subsoil

DEFF Research Database (Denmark)

Christensen, Erik Damgaard; Sumer, B. Mutlu; Schouten, Jan-Joost

2015-01-01

This chapter gives an introduction to deliverable D5.3 - Interaction between currents, waves, structure and subsoil – with respect to the MERMAID project. The deliverable focuses on the conditions in European waters such as the four sites that is addressed in the MERMAID project. The most important...

Magnetism in ordered metallic perovskite compound GdPd3BxC1-x

International Nuclear Information System (INIS)

Pandey, Abhishek; Mazumdar, Chandan; Ranganathan, R.; Dattagupta, S.

2009-01-01

We report results of dc-magnetization, ac-susceptibility and magnetoresistance measurements on crystalline metallic-perovskite compounds GdPd 3 B x C 1-x (x=0.25, 0.50, 0.75 and 1.00) and the parent cubic compound GdPd 3 . The interest in these materials stems from the observation of negative temperature coefficient of resistance and negative thermal expansion in some of the members of this series. In the present study, we show that by substitution of non-magnetic elements, boron and carbon, the nature of the magnetic interaction can be varied from dominating ferromagnetic to antiferromagnetic and finally to a canted magnetic structure without altering the crystal symmetry of the compounds. The variation of magnetic interaction by modifying the lattice parameter resembles Ruderman-Kittel-Kasuya-Yosida (RKKY) oscillations.

Synthesis and structure of coordination compounds of N-heteroaromatic angular anthraquinones with gallium(3) and jndium(3) chlorides

International Nuclear Information System (INIS)

Zajtsev, B.E.; Rudnitskaya, O.V.; Zajtseva, V.A.; Molodkin, A.K.; Gorelik, M.V.

1979-01-01

Synthesized for the first time are complex compounds GaCl 3 and InCl 3 with α-pyridine anthraquinone (L') and pyrazine anthraquinone (L'') of the composition GaCl 3 xL 1 ; 1.5GaCl 3 xL''x1.5H 2 O; GaCl 3 xL 1 xHCl; InCl 3 x2L'x2HCl. Usjng the methods of electronic and infrared spectroscopy it has been shown that in a case of InCl 3 complex with L' In atom forms coordination bond with nitrogen atom of pyridine cycle and with carbonyl oxygen with six-member cycle closing. It has been shown that L' is included in the composition of the compounds, obtained in acid medium as the second sphere cation of pyridinium anthraquinone: [InCl 5 ]sup(2-) (L'H + ) 2 , where L'H + - cation of pyridinium anthraquinone

Particle transport in 3He-rich events: wave-particle interactions and particle anisotropy measurements

Directory of Open Access Journals (Sweden)

B. T. Tsurutani

2002-04-01

Full Text Available Energetic particles and MHD waves are studied using simultaneous ISEE-3 data to investigate particle propagation and scattering between the source near the Sun and 1 AU. 3 He-rich events are of particular interest because they are typically low intensity "scatter-free" events. The largest solar proton events are of interest because they have been postulated to generate their own waves through beam instabilities. For 3 He-rich events, simultaneous interplanetary magnetic spectra are measured. The intensity of the interplanetary "fossil" turbulence through which the particles have traversed is found to be at the "quiet" to "intermediate" level of IMF activity. Pitch angle scattering rates and the corresponding particle mean free paths lW - P are calculated using the measured wave intensities, polarizations, and k directions. The values of lW - P are found to be ~ 5 times less than the value of lHe , the latter derived from He intensity and anisotropy time profiles. It is demonstrated by computer simulation that scattering rates through a 90° pitch angle are lower than that of other pitch angles, and that this is a possible explanation for the discrepancy between the lW - P and lHe values. At this time the scattering mechanism(s is unknown. We suggest a means where a direct comparison between the two l values could be made. Computer simulations indicate that although scattering through 90° is lower, it still occurs. Possibilities are either large pitch angle scattering through resonant interactions, or particle mirroring off of field compression regions. The largest solar proton events are analyzed to investigate the possibilities of local wave generation at 1 AU. In accordance with the results of a previous calculation (Gary et al., 1985 of beam stability, proton beams at 1 AU are found to be marginally stable. No evidence for substantial wave amplitude was found. Locally generated waves, if present, were less than 10-3 nT 2 Hz-1 at the leading

Particle transport in 3He-rich events: wave-particle interactions and particle anisotropy measurements

Directory of Open Access Journals (Sweden)

T. Hada

Full Text Available Energetic particles and MHD waves are studied using simultaneous ISEE-3 data to investigate particle propagation and scattering between the source near the Sun and 1 AU. 3 He-rich events are of particular interest because they are typically low intensity "scatter-free" events. The largest solar proton events are of interest because they have been postulated to generate their own waves through beam instabilities. For 3 He-rich events, simultaneous interplanetary magnetic spectra are measured. The intensity of the interplanetary "fossil" turbulence through which the particles have traversed is found to be at the "quiet" to "intermediate" level of IMF activity. Pitch angle scattering rates and the corresponding particle mean free paths lW - P are calculated using the measured wave intensities, polarizations, and k directions. The values of lW - P are found to be ~ 5 times less than the value of lHe , the latter derived from He intensity and anisotropy time profiles. It is demonstrated by computer simulation that scattering rates through a 90° pitch angle are lower than that of other pitch angles, and that this is a possible explanation for the discrepancy between the lW - P and lHe values. At this time the scattering mechanism(s is unknown. We suggest a means where a direct comparison between the two l values could be made. Computer simulations indicate that although scattering through 90° is lower, it still occurs. Possibilities are either large pitch angle scattering through resonant interactions, or particle mirroring off of field compression regions. The largest solar proton events are analyzed to investigate the possibilities of local wave generation at 1 AU. In accordance with the results of a previous calculation (Gary et al., 1985 of beam stability, proton beams at 1 AU are found to be marginally stable. No evidence for substantial wave amplitude was found. Locally generated waves, if present, were less than 10-3 nT 2 Hz-1 at the leading

Synthesis and fundamental properties of stable Ph(3)SnSiH(3) and Ph(3)SnGeH(3) hydrides: model compounds for the design of Si-Ge-Sn photonic alloys.

Science.gov (United States)

Tice, Jesse B; Chizmeshya, Andrew V G; Groy, Thomas L; Kouvetakis, John

2009-07-06

The compounds Ph(3)SnSiH(3) and Ph(3)SnGeH(3) (Ph = C(6)H(5)) have been synthesized as colorless solids containing Sn-MH(3) (M = Si, Ge) moieties that are stable in air despite the presence of multiple and highly reactive Si-H and Ge-H bonds. These molecules are of interest since they represent potential model compounds for the design of new classes of IR semiconductors in the Si-Ge-Sn system. Their unexpected stability and high solubility also makes them a safe, convenient, and potentially useful delivery source of -SiH(3) and -GeH(3) ligands in molecular synthesis. The structure and composition of both compounds has been determined by chemical analysis and a range of spectroscopic methods including multinuclear NMR. Single crystal X-ray structures were determined and indicated that both compounds condense in a Z = 2 triclinic (P1) space group with lattice parameters (a = 9.7754(4) A, b = 9.8008(4) A, c = 10.4093(5) A, alpha = 73.35(10)(o), beta = 65.39(10)(o), gamma = 73.18(10)(o)) for Ph(3)SnSiH(3) and (a = 9.7927(2) A, b = 9.8005(2) A, c = 10.4224(2) A, alpha = 74.01(3)(o), beta = 65.48(3)(o), gamma = 73.43(3)(o)) for Ph(3)SnGeH(3). First principles density functional theory simulations are used to corroborate the molecular structures of Ph(3)SnSiH(3) and Ph(3)SnGeH(3), gain valuable insight into the relative stability of the two compounds, and provide correlations between the Si-Sn and Ge-Sn bonds in the molecules and those in tetrahedral Si-Ge-Sn solids.

Anti-Pseudomonas aeruginosa compound, 1,2,3,4-tetrahydro-1,3,5-triazine derivative, exerts its action by primarily targeting MreB.

Science.gov (United States)

Yamachika, Shinichiro; Sugihara, Chika; Tsuji, Hayato; Muramatsu, Yasunori; Kamai, Yasuki; Yamashita, Makoto

2012-01-01

In order to find new anti-Pseudomonas agents, we carried out whole-cell based P. aeruginosa growth assay, and identified 1,2,3,4-tetrahydro-1,3,5-triazine (Compound A). This compound showed anti-Pseudomonas activity against wild as well as pumpless strain equally at a same concentration. Also, this compound was structurally very similar to A22, which is known to inhibit the bacterial actin-like protein MreB. By the analysis of resistant strains, the primary target of this compound in P. aeruginosa was definitely confirmed to be MreB. In addition, these compounds showed a bacteriostatic effect, and induced the morphology changes in P. aeruginosa from rod shape to sphere shape, which leads to be clinically favorable in terms of susceptibility to phagocytosis and release of endotoxin. These results display that Compound A is a very attractive compound which shows anti-P. aeruginosa activity based on inhibition of MreB without being affected by efflux pumps, and could provide a new step toward development of new promising anti-Pseudomonas agents, MreB inhibitors.

Propagation of 3D internal gravity wave beams in a slowly varying stratification

Science.gov (United States)

Fan, Boyu; Akylas, T. R.

2017-11-01

The time-mean flows induced by internal gravity wave beams (IGWB) with 3D variations have been shown to have dramatic implications for long-term IGWB dynamics. While uniform stratifications are convenient both theoretically and in the laboratory, stratifications in the ocean can vary by more than an order of magnitude over the ocean depth. Here, in view of this fact, we study the propagation of a 3D IGWB in a slowly varying stratification. We assume that the stratification varies slowly relative to the local variations in the wave profile. In the 2D case, the IGWB bends in response to the changing stratification, but nonlinear effects are minor even in the finite amplitude regime. For a 3D IGWB, in addition to bending, we find that nonlinearity results in the transfer of energy from waves to a large-scale time-mean flow associated with the mean potential vorticity, similar to IGWB behavior in a uniform stratification. In a weakly nonlinear setting, we derive coupled evolution equations that govern this process. We also use these equations to determine the stability properties of 2D IGWB to 3D perturbations. These findings indicate that 3D effects may be relevant and possibly fundamental to IGWB dynamics in nature. Supported by NSF Grant DMS-1512925.

Electromagnetic Waves with Frequencies Near the Local Proton Gryofrequency: ISEF-3 1 AU Observations

Science.gov (United States)

Tsurutani, B.

1993-01-01

Low Frequency electromagnetic waves with periods near the local proton gyrofrequency have been detected near 1 AU by the magnetometer onboard ISEE-3. For these 1 AU waves two physical processes are possible: solar wind pickup of nuetral (interstellar?) particles and generation by relativistic electron beams propagating from the Sun.

Electronic and magnetic properties of rare earth-Sn3 compounds for 119Sn Moessbauer spectroscopy

International Nuclear Information System (INIS)

Sanchez, J.P.; Friedt, J.M.; Shenoy, G.K.; Percheron, A.; Achard, J.C.

1975-01-01

The electronic and magnetic properties of RESn 3 compounds (RE=La, Ce, Pr, Nd, Sm, Eu, Gd, Yb) have been investigated using the 23.8keV Moessbauer resonance of 119 Sn. The isomer shifts and quadrupole interactions are nearly the same in all compounds. The transferred magnetic fields and their orientation with respect to the principal electric field gradient axis at various Sn sites in the magnetically ordered state of RESn 3 (RE=Pr, Nd, Sm, Eu, Gd) have been utilized to get information about the magnetic structure. An evaluation of the transferred fields in PrSn 3 and NdSn 3 shows that the spin density at the Sn nucleus is nearly the same in both compounds [fr

Pitting Corrosion of Ni3(Si,Ti Intermetallic Compound at Various Chloride Concentrations

Directory of Open Access Journals (Sweden)

Gadang Priyotomo

2013-10-01

Full Text Available The pitting corrosion of Ni3(Si,Ti intermetallic compound was investigated as function of chloride concentration by using electrochemical method and scanning electron microscope in sodium chloride solutions at 293 K.  In addition, the pitting corrosion of type C276 alloy was also studied under the same experimental condition for comparison.  The pitting potential obtained for the intermetallic compound decreased with increasing chloride concentration.  The specific pitting potential and pitting potential of Ni3(Si,Ti were lower than those of C276 alloy, which means that the pitting corrosion resistance of C276 alloy was higher than that of Ni3(Si,Ti.

Various processes occurring in strong interactions between heavy ions: Compound nucleus formation, incomplete fusion, and quasifission

International Nuclear Information System (INIS)

Lefort, M.

1975-01-01

This paper deals with the problem of various deep processes occurring when two complex nuclei enter in collision. It is suggested that very deep inelastic processes may lead to either a compound nucleus or a composite system which shortly decays into two fission fragments (quasifission process). Particularly for heavy projectiles and targets, the predominant Coulomb potential inhibits the compound nucleus formation for low l waves. Then a critical angular momentum can be defined as the limit below which both processes (quasifission and compound nucleus formation) occur. For the heaviest nuclei, nearly all l waves below l) contribute to the quasifission phenomenon

Light propagation and emission in scattering media. Application to imaging of complex media

International Nuclear Information System (INIS)

Pierrat, Romain

2007-01-01

In this manuscript, we raise different aspects of the propagation and emission of electromagnetic waves in a scattering medium. In the first part, we show that the Radiative Transfer Equation (rte) is a very good tool to study light propagation in a complex medium. Thanks to this formalism, we study the evolution of the spatial coherence of the beam inside the medium, which is seen as a signature of the different transport regimes of photons (single scattering, multiple scattering, diffusive regime). Next, we derive rigorously the diffusion approximation by using a modal approach of the rte. In particular, we obtain that the diffusion coefficient is independent of the level of absorption in the dynamic regime while it depends on absorption in the case of the steady-state regime. Finally, we study the temporal fluctuations of the scattered intensity and show that the use of the rte allows to go beyond the diffusive regime described by the diffusing-waves spectroscopy theory (dws). Comparisons between numerical computations and experiments are realized in reflexion to underline the fundamental role of the anisotropy of the scattering, which is not described by the standard theory. The second part is dedicated to the study of light emission in complex media. First, we study the amplification of scattered light in a gain system called random laser and show that it exists a laser threshold in the incoherent feedback regime. This threshold is quantified by using a modal approach of the rte. Thanks to this formalism, we highlight the limitations of the diffusion approximation in such a system. Next, we study the modification of the fluorescent decay rate of a single molecule embedded in a complex medium. We derive a model allowing the replacement of the scattering medium by an homogeneous equivalent medium taking into account the multiple scattering and the interactions between scatterers. This model is validated by comparison with the value of the decay rate of the

Ion Acoustic Wave Frequencies and Onset Times During Type 3 Solar Radio Bursts

Science.gov (United States)

Cairns, Iver H.; Robinson, P. A.

1995-01-01

Conflicting interpretations exist for the low-frequency ion acoustic (S) waves often observed by ISEE 3 in association with intense Langmuir (L) waves in the source regions of type III solar radio bursts near 1 AU. Two indirect lines of observational evidence, as well as plasma theory, suggest they are produced by the electrostatic (ES) decay L yields L(PRIME) + S. However, contrary to theoretical predictions, an existing analysis of the wave frequencies instead favors the electromagnetic (EM) decays L yields T + S, where T denotes an EM wave near the plasma frequency. This conflict is addressed here by comparing the observed wave frequencies and onset times with theoretical predictions for the ES and EM decays, calculated using the time-variable electron beam and magnetic field orientation data, rather than the nominal values used previously. Field orientation effects and beam speed variations are shown analytically to produce factor-of-three effects, greater than the difference in wave frequencies predicted for the ES and EM decays; effects of similar magnitude occur in the events analyzed here. The S-wave signals are extracted by hand from a sawtooth noise background, greatly improving the association between S waves and intense L waves. Very good agreement exists between the time-varying predictions for the ES decay and the frequencies of most (but not all) wave bursts. The waves occur only after the ES decay becomes kinematically allowed, which is consistent with the ES decay proceeding and producing most of the observed signals. Good agreement exists between the EM decay's predictions and a significant fraction of the S-wave observations while the EM decay is kinematically allowed. The wave data are not consistent, however, with the EM decay being the dominant nonlinear process. Often the observed waves are sufficiently broadband to overlap simultaneously the frequency ranges predicted for the ES and EM decays. Coupling the dominance of the ES decay with this

ASSOCIATION OF {sup 3}He-RICH SOLAR ENERGETIC PARTICLES WITH LARGE-SCALE CORONAL WAVES

Energy Technology Data Exchange (ETDEWEB)

Bučík, Radoslav [Institut für Astrophysik, Georg-August-Universität Göttingen, D-37077, Göttingen (Germany); Innes, Davina E. [Max-Planck-Institut für Sonnensystemforschung, D-37077, Göttingen (Germany); Mason, Glenn M. [Applied Physics Laboratory, Johns Hopkins University, Laurel, MD 20723 (United States); Wiedenbeck, Mark E., E-mail: bucik@mps.mpg.de [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

2016-12-10

Small, {sup 3}He-rich solar energetic particle (SEP) events have been commonly associated with extreme-ultraviolet (EUV) jets and narrow coronal mass ejections (CMEs) that are believed to be the signatures of magnetic reconnection, involving field lines open to interplanetary space. The elemental and isotopic fractionation in these events are thought to be caused by processes confined to the flare sites. In this study, we identify 32 {sup 3}He-rich SEP events observed by the Advanced Composition Explorer , near the Earth, during the solar minimum period 2007–2010, and we examine their solar sources with the high resolution Solar Terrestrial Relations Observatory ( STEREO ) EUV images. Leading the Earth, STEREO -A has provided, for the first time, a direct view on {sup 3}He-rich flares, which are generally located on the Sun’s western hemisphere. Surprisingly, we find that about half of the {sup 3}He-rich SEP events in this survey are associated with large-scale EUV coronal waves. An examination of the wave front propagation, the source-flare distribution, and the coronal magnetic field connections suggests that the EUV waves may affect the injection of {sup 3}He-rich SEPs into interplanetary space.

WASS: An open-source pipeline for 3D stereo reconstruction of ocean waves

Science.gov (United States)

Bergamasco, Filippo; Torsello, Andrea; Sclavo, Mauro; Barbariol, Francesco; Benetazzo, Alvise

2017-10-01

Stereo 3D reconstruction of ocean waves is gaining more and more popularity in the oceanographic community and industry. Indeed, recent advances of both computer vision algorithms and computer processing power now allow the study of the spatio-temporal wave field with unprecedented accuracy, especially at small scales. Even if simple in theory, multiple details are difficult to be mastered for a practitioner, so that the implementation of a sea-waves 3D reconstruction pipeline is in general considered a complex task. For instance, camera calibration, reliable stereo feature matching and mean sea-plane estimation are all factors for which a well designed implementation can make the difference to obtain valuable results. For this reason, we believe that the open availability of a well tested software package that automates the reconstruction process from stereo images to a 3D point cloud would be a valuable addition for future researches in this area. We present WASS (http://www.dais.unive.it/wass), an Open-Source stereo processing pipeline for sea waves 3D reconstruction. Our tool completely automates all the steps required to estimate dense point clouds from stereo images. Namely, it computes the extrinsic parameters of the stereo rig so that no delicate calibration has to be performed on the field. It implements a fast 3D dense stereo reconstruction procedure based on the consolidated OpenCV library and, lastly, it includes set of filtering techniques both on the disparity map and the produced point cloud to remove the vast majority of erroneous points that can naturally arise while analyzing the optically complex nature of the water surface. In this paper, we describe the architecture of WASS and the internal algorithms involved. The pipeline workflow is shown step-by-step and demonstrated on real datasets acquired at sea.

Isotopically modified compounds

International Nuclear Information System (INIS)

Kuruc, J.

2009-01-01

In this chapter the nomenclature of isotopically modified compounds in Slovak language is described. This chapter consists of following parts: (1) Isotopically substituted compounds; (2) Specifically isotopically labelled compounds; (3) Selectively isotopically labelled compounds; (4) Non-selectively isotopically labelled compounds; (5) Isotopically deficient compounds.

3D Tests on Overtopping for SSG Wave Energy Converter

DEFF Research Database (Denmark)

Margheritini, Lucia; Kofoed, Jens Peter

This report presents the results of the first study based on laboratory tests of the behaviour of the SSG pilot module in 3D wave conditions. This study was recommended already during Phase 2 of the Co-operation agreement between WEVEnergy AS (Norway) and Aalborg University, Department of Civil...... of the individual reservoirs have been measured and the hydraulic efficiency calculated. The results are given in terms of overtopping rates for the 3 reservoirs and hydraulic efficiency....

Paracousti-UQ: A Stochastic 3-D Acoustic Wave Propagation Algorithm.

Energy Technology Data Exchange (ETDEWEB)

Preston, Leiph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-09-01

Acoustic full waveform algorithms, such as Paracousti, provide deterministic solutions in complex, 3-D variable environments. In reality, environmental and source characteristics are often only known in a statistical sense. Thus, to fully characterize the expected sound levels within an environment, this uncertainty in environmental and source factors should be incorporated into the acoustic simulations. Performing Monte Carlo (MC) simulations is one method of assessing this uncertainty, but it can quickly become computationally intractable for realistic problems. An alternative method, using the technique of stochastic partial differential equations (SPDE), allows computation of the statistical properties of output signals at a fraction of the computational cost of MC. Paracousti-UQ solves the SPDE system of 3-D acoustic wave propagation equations and provides estimates of the uncertainty of the output simulated wave field (e.g., amplitudes, waveforms) based on estimated probability distributions of the input medium and source parameters. This report describes the derivation of the stochastic partial differential equations, their implementation, and comparison of Paracousti-UQ results with MC simulations using simple models.

Ce2Co3Ge5: a new U2Co3Si5 - type valance fluctuating compound

International Nuclear Information System (INIS)

Layek, Samar; Hossain, Zakir

2010-01-01

Poly crystalline sample of Ce 2 Co 3 Ge 5 have been prepared by arc melting and consequently annealing at 1100 deg C. Rietveld refinement of XRD shows that it crystallize in the orthorhombic U 2 Co 3 Si 5 structure (space group Ibam) with crystal parameters a= 9.802A, b= 11.777A and c= 5.941A and unit cell volume V= 684.8 A 3 The unit cell volume of Ce 2 Co 3 Ge 5 is seen clearly to deviate from that expected on the basis of lanthanide contraction. From susceptibility measurement, effective magnetic moment of this compound μ eff = 0.95 μ B which is lower than magnetic moment free for Ce 3+ ions (2.54 μB) but higher than that of non-magnetic Ce 4+ state (0 μ B ). All these results clearly indicated Ce 2 Co 3 Ge 5 to be a mixed valance compound. (author)

Single crystals of the anisotropic Kagome staircase compounds Ni3V2O8 and Co3V2O8

OpenAIRE

Balakrishnan, G.; Petrenko, O. A.; Lees, M. R.; Paul, D. McK.

2004-01-01

Compounds with a Kagome type lattice are known to exhibit magnetic frustration. Large single crystals of two compounds Ni3V2O8 and Co3V2O8, which are variants of a Kagome net lattice, have been grown successfully by the floating zone technique using an optical image furnace. The single crystals are of high quality and exhibit intriguing magnetic properties.

Microstructure and growth mechanism of tin whiskers on RESn3 compounds

International Nuclear Information System (INIS)

Li Caifu; Liu Zhiquan

2013-01-01

Graphical abstract: Large amount of intact tin whiskers were firstly prepared without post handling, and their microstructures were investigated systematically with TEM. A growth model was proposed to explain the observed growth characteristics from Sn–RE alloys. - Abstract: An exclusive method was developed to prepare intact tin whiskers as transmission electron microscope specimens, and with this technique in situ observation of tin whisker growth from RESn 3 (RE = Nd, La, Ce) film specimen was first achieved. Electron irradiation was discovered to have an effect on the growth of a tin whisker through its root. Large quantities of tin whiskers with diameters from 20 nm to 10 μm and lengths ranging from 50 nm to 500 μm were formed at a growth rate of 0.1–1.8 nm s −1 on the surface of RESn 3 compounds. Most (>85%) of these tin whiskers have preferred growth directions of 〈1 0 0〉, 〈0 0 1〉, 〈1 0 1〉 and 〈1 0 3〉, as determined by statistics. This kind of tin whisker is single-crystal β-Sn even if it has growth striations, steps and kinks, and no dislocations or twin or grain boundaries were observed within the whisker body. RESn 3 compounds undergo selective oxidation during whisker growth, and the oxidation provides continuous tin atoms for tin whisker growth until they are exhausted. The driving force for whisker growth is the compressive stress resulting from the restriction of the massive volume expansion (38–43%) during the oxidation by the surface RE(OH) 3 layer. Tin atoms diffuse and flow to feed the continuous growth of tin whiskers under a compressive stress gradient formed from the extrusion of tin atoms/clusters at weak points on the surface RE(OH) 3 layers. A growth model was proposed to discuss the characteristics and growth mechanism of tin whiskers from RESn 3 compounds.

Toward a scalable flexible-order model for 3D nonlinear water waves

DEFF Research Database (Denmark)

Engsig-Karup, Allan Peter; Ducrozet, Guillaume; Bingham, Harry B.

For marine and coastal applications, current work are directed toward the development of a scalable numerical 3D model for fully nonlinear potential water waves over arbitrary depths. The model is high-order accurate, robust and efficient for large-scale problems, and support will be included...... for flexibility in the description of structures by the use of curvilinear boundary-fitted meshes. The mathematical equations for potential waves in the physical domain is transformed through $\\sigma$-mapping(s) to a time-invariant boundary-fitted domain which then becomes a basis for an efficient solution...... strategy on a time-invariant mesh. The 3D numerical model is based on a finite difference method as in the original works \\cite{LiFleming1997,BinghamZhang2007}. Full details and other aspects of an improved 3D solution can be found in \\cite{EBL08}. The new and improved approach for three...

Experiment for 3-component S-wave reflection survey. Part 3; Sanseibun S ha hanshaho no kiso jikken. 4

Energy Technology Data Exchange (ETDEWEB)

Kano, N; Kiguchi, T; Yamaguchi, K [Geological Survey of Japan, Tsukuba (Japan); Yokota, T [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

1997-10-22

Investigations and discussions were given by using P-S logging on anisotropy of refracted waves in the fundamental experiments conducted in the Matsuyama town, Yamagata Prefecture. In the investigations, S-wave was transmitted into two to three directions at four locations in total: one at the opening of a well with a depth of 100 m and three locations having offset of 50 m from the well opening, and anisotropy of direct waves in the depth direction was investigated. Data were recorded on the ground at the same time by using a 3-component receiver. As a result of the experiment, detection of the anisotropy by means of measurement inside the well was found more difficult than anticipated due to anomaly in the refracted waves, hence no clear velocity anisotropy has been observed. It appears that no azimuth anisotropy exists at depths shallower than at least 24 m. No anisotropy due to incident angles was made clear in the present experiment. Offset recording experienced poor S/N ratio, having made the data analysis difficult. The data for zero offset do not harmonize with the refracted wave analysis on the data derived by using the reflection method, whose cause requires further discussions. 4 figs., 2 tabs.

The orthorhombic fluorite related compounds Ln/sub 3/RuO/sub 7/, Ln=Nd, Sm and Eu

International Nuclear Information System (INIS)

Van Berkel, F.P.F.; Ijdo, D.J.W.

1986-01-01

Fluorite-related Ru(V) compound with composition Ln/sub 3/RuO/sub 7/ have been found. These compounds with space group Cmcm adopt a superstructure of the cubic fluorite structure with a/sub orth/=2a/sub c/, b/sub orth/=c/sub orth/=a/sub c/√2. These compounds have the same structure as La/sub 3/NbO/sub 7/

High pressure study of the intermetallic compound UFe2Al10

International Nuclear Information System (INIS)

Halevy, I.; Zenou, V.Y.; Salhov, S.; Caspi, E.N.; Schaefer, W.; Yaar, I.

2006-01-01

The crystallographic and electronic structure of UFe 2 Al 10 was studied as a function of pressure by combining X-ray diffraction results with the full potential linearized augmented plane wave (LAPW) calculations method. The volume-pressure reduction measured at 23.5 GPa is V/V 0 = 0.87, with a B 0 value of 132 ± 8 GPa. The uranium 5f electrons in this compound are located in a narrow and well-defined band above E Fermi , having a very weak interaction with the iron 3d band located below E Fermi . Consequently, the DOS at E Fermi is close to zero, indicating a close to zero-magnetic moment of the uranium atom at low temperature up to a pressure of 23.5 GPa, as expected from the layered crystallographic structure of this compound. The above assumption is supported by preliminary neutron diffraction data, where no long-range magnetic order was detected down to 3 K

Crystal structure of CsTb(PO3)4 compound

International Nuclear Information System (INIS)

Palkina, K.K.; Maksimova, S.I.; Kuznetsov, V.G.; Chibiskova, N.T.

1978-01-01

The X-ray structural study of compounds of the CsLn(PO 3 ) 4 series has been made. Found is the presence of two structural types for CsPr(PO 3 ) 4 (cubic and monoclinic modifications), one type for CsNd(PO 3 ) 4 (cubic modification) and for CsTb(PO 3 ) 4 (monoclinic modification). For the CsTb(PO 3 ) 4 monocrystal the lattice parameters are determined: a=7.032 +- 0.001; b=8.705 +- 0.001; c=9.051 +- 0.001 A; α=90 deg, β=90 deg, γ=100 deg, Z=2, V=545.68 A 3 , dsub(exp)=3.70 g/cm 3 . The structure character is presented as infinite chains of (PO 4 ) tetrahedrons, stretched along the ''C'' period. Tb and Cs atoms are rounded by 8 atoms of oxygen. Tb polyhedron are irregular octaapexes or strongly deformed tetragonal antiprisms. Tb-Tb shortest distance is 6.59 A

Full conformational landscape of 3-Methoxyphenol revealed by room temperature mm-wave rotational spectroscopy supported by quantum chemical calculations.

Science.gov (United States)

Roucou, Anthony; Fontanari, Daniele; Dhont, Guillaume; Jabri, Atef; Bray, Cédric; Hindle, Francis; Mouret, Gaël; Bocquet, Robin; Cuisset, Arnaud

2018-03-30

Room temperature millimeter-wave rotational spectroscopy supported by high level of theory calculations have been employed to fully characterise the conformational landscape of 3-Methoxyphenol, a semi-volatile polar oxygenated aromatic compound precursor of secondary organic aerosols in the atmosphere arising from biomass combustion. While previous rotationally-resolved spectroscopic studies in the microwave and in the UV domains failed to observe the complete conformational landscape, the 70 - 330 GHz rotational spectrum measured in this study reveals the ground state rotational signatures of the four stable conformations theoretically predicted. Moreover, rotational transitions in the lowest energy vibrationally excited states were assigned for two conformers. While the inertial defect of methoxyphenol does not signicantly change between conformers and isomers, the excitation of the methoxy out-of-plane bending is the main contribution to the non-planarity of the molecule. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Scaffold Hopping Toward Agomelatine: Novel 3, 4-Dihydroisoquinoline Compounds as Potential Antidepressant Agents

Science.gov (United States)

Yang, Yang; Ang, Wei; Long, Haiyue; Chang, Ying; Li, Zicheng; Zhou, Liangxue; Yang, Tao; Deng, Yong; Luo, Youfu

2016-10-01

A scaffold-hopping strategy toward Agomelatine based on in silico screening and knowledge analysis was employed to design novel antidepressant agents. A series of 3, 4-dihydroisoquinoline compounds were selected for chemical synthesis and biological assessment. Three compounds (6a-1, 6a-2, 6a-9) demonstrated protective effects on corticosterone-induced lesion of PC12 cells. Compound 6a-1 also displayed low inhibitory effects on the growth of HEK293 and L02 normal cells and it was further evaluated for its potential antidepressant effects in vivo. The forced swim test (FST) results revealed that compound 6a-1 remarkably reduced the immobility time of rats and the open field test (OFT) results indicated a better general locomotor activity of the rats treated with compound 6a-1 than those with Agomelatine or Fluoxetine. Mechanism studies implied that compound 6a-1 can significantly reduce PC12 cell apoptosis by up-regulation of GSH and down-regulation of ROS in corticosterone-induced lesion of PC12 cells. Meanwhile, the down-regulation of calcium ion concentration and up-regulation of BDNF level in PC12 cells may account for the neuroprotective effects. Furthermore, compound 6a-1 can increase cell survival and cell proliferation, promote cell maturation in the rat hippocampus after chronic treatment. The acute toxicity data in vivo indicated compound 6a-1 exhibited less hepatotoxicity than Agomelatine.

Thermal Expansion Anomaly and Spontaneous Magnetostriction of Y2Fe14Al3 Compound

International Nuclear Information System (INIS)

Yan-Ming, Hao; Xin-Yuan, Jiang; Chun-Jing, Gao; Yan-Zhao, Wu; Yan-Yan, Zhang

2009-01-01

The structure and magnetic properties of Y 2 Fe 14 Al 3 compound are investigated by means of x-ray diffraction and magnetization measurements. The Y 2 Fe 14 Al 3 compound has a hexagonal Th 2 Ni 17 -type structure. Negative thermal expansion is found in Y 2 Fe 14 Al 3 compound in the temperature range from 403 to 491K by x-ray dilatometry. The coefficient of the average thermal expansion is α-bar = –2.54 × 10 −5 K −1 . The spontaneous magnetostrictive deformations from 283 to 470K are calculated by means of the differences between the experimental values of the lattice parameters and the corresponding values extrapolated from the paramagnetic range. The result shows that the spontaneous volume magnetostrictive deformation ω S decreases from 5.74 × 10 −3 to nearly zero with temperature increasing from 283 to 470 K, the spontaneous linear magnetostrictive deformation λ c along the c-axis is larger than the spontaneous linear magnetostrictive deformation λ a in basal-plane in the same temperature below 350 K

Spin-wave stiffness in the Dzyaloshinskii-Moriya helimagnets Mn1 -xFexSi

Science.gov (United States)

Grigoriev, S. V.; Altynbaev, E. V.; Siegfried, S.-A.; Pschenichnyi, K. A.; Menzel, D.; Heinemann, A.; Chaboussant, G.

2018-01-01

The small-angle neutron scattering is used to measure the spin-wave stiffness in the field-polarized state of the Dzyaloshinskii-Moriya helimagnets Mn1 -xFexSi with x =0.03 , 0.06, 0.09, and 0.10. The Mn1 -xFexSi compounds are helically ordered below Tc and show a helical fluctuation regime above Tc in a wide range up to TDM. The critical temperatures Tc and TDM decrease with x and tend to 0 at x =0.11 and 0.17, respectively. We have found that the spin-wave stiffness A change weakly with temperature for each individual Fe-doped compound. On the other hand, the spin-wave stiffness A decreases with x duplicating the TDM dependence on x , rather than Tc(x ) . These findings classify the thermal phase transition in all Mn1 -xFexSi compounds as an abrupt change in the spin state caused, most probably, by the features of an electronic band structure. Moreover, the criticality in these compounds is not related to the value of the ferromagnetic interaction but demonstrates the remarkable role of the Dzyaloshinskii-Moriya interaction as a factor destabilizing the magnetic order.

Identification of a powerful aroma compound in munster and camembert cheeses: ethyl 3-mercaptopropionate.

Science.gov (United States)

Sourabié, Alain M; Spinnler, Henry-Eric; Bonnarme, Pascal; Saint-Eve, Anne; Landaud, Sophie

2008-06-25

With the view to investigate the presence of thiols in cheese, the use of different methods of preparation and extraction with an organomercuric compound ( p-hydroxymercuribenzoate) enabled the isolation of a new compound. The analysis of cheese extracts by gas chromatography coupled with pulse flame photometry, mass spectrometry, and olfactometry detections led to the identification of ethyl 3-mercaptopropionate in Munster and Camembert cheeses. This compound, described at low concentrations as having pleasant, fruity, grapy, rhubarb, and empyreumatic characters, has previously been reported in wine and Concord grape but was never mentioned before in cheese. A possible route for the formation of this compound in relation with the catabolism of sulfur amino acids is proposed.

Targeting aquaporin function: potent inhibition of aquaglyceroporin-3 by a gold-based compound.

Directory of Open Access Journals (Sweden)

Ana Paula Martins

Full Text Available Aquaporins (AQPs are membrane channels that conduct water and small solutes such as glycerol and are involved in many physiological functions. Aquaporin-based modulator drugs are predicted to be of broad potential utility in the treatment of several diseases. Until today few AQP inhibitors have been described as suitable candidates for clinical development. Here we report on the potent inhibition of AQP3 channels by gold(III complexes screened on human red blood cells (hRBC and AQP3-transfected PC12 cells by a stopped-flow method. Among the various metal compounds tested, Auphen is the most active on AQP3 (IC(50 = 0.8±0.08 µM in hRBC. Interestingly, the compound poorly affects the water permeability of AQP1. The mechanism of gold inhibition is related to the ability of Au(III to interact with sulphydryls groups of proteins such as the thiolates of cysteine residues. Additional DFT and modeling studies on possible gold compound/AQP adducts provide a tentative description of the system at a molecular level. The mapping of the periplasmic surface of an homology model of human AQP3 evidenced the thiol group of Cys40 as a likely candidate for binding to gold(III complexes. Moreover, the investigation of non-covalent binding of Au complexes by docking approaches revealed their preferential binding to AQP3 with respect to AQP1. The high selectivity and low concentration dependent inhibitory effect of Auphen (in the nanomolar range together with its high water solubility makes the compound a suitable drug lead for future in vivo studies. These results may present novel metal-based scaffolds for AQP drug development.

Spatial Angular Compounding Technique for H-Scan Ultrasound Imaging.

Science.gov (United States)

Khairalseed, Mawia; Xiong, Fangyuan; Kim, Jung-Whan; Mattrey, Robert F; Parker, Kevin J; Hoyt, Kenneth

2018-01-01

H-Scan is a new ultrasound imaging technique that relies on matching a model of pulse-echo formation to the mathematics of a class of Gaussian-weighted Hermite polynomials. This technique may be beneficial in the measurement of relative scatterer sizes and in cancer therapy, particularly for early response to drug treatment. Because current H-scan techniques use focused ultrasound data acquisitions, spatial resolution degrades away from the focal region and inherently affects relative scatterer size estimation. Although the resolution of ultrasound plane wave imaging can be inferior to that of traditional focused ultrasound approaches, the former exhibits a homogeneous spatial resolution throughout the image plane. The purpose of this study was to implement H-scan using plane wave imaging and investigate the impact of spatial angular compounding on H-scan image quality. Parallel convolution filters using two different Gaussian-weighted Hermite polynomials that describe ultrasound scattering events are applied to the radiofrequency data. The H-scan processing is done on each radiofrequency image plane before averaging to get the angular compounded image. The relative strength from each convolution is color-coded to represent relative scatterer size. Given results from a series of phantom materials, H-scan imaging with spatial angular compounding more accurately reflects the true scatterer size caused by reductions in the system point spread function and improved signal-to-noise ratio. Preliminary in vivo H-scan imaging of tumor-bearing animals suggests this modality may be useful for monitoring early response to chemotherapeutic treatment. Overall, H-scan imaging using ultrasound plane waves and spatial angular compounding is a promising approach for visualizing the relative size and distribution of acoustic scattering sources. Copyright © 2018 World Federation for Ultrasound in Medicine and Biology. Published by Elsevier Inc. All rights reserved.

Compendium of shock wave data. Section A2. Inorganic compounds. Section B. Hydrocarbons

International Nuclear Information System (INIS)

van Thiel, M.; Shaner, J.; Salinas, E.

1977-06-01

This volume lists in a concise manner the thermodynamic data in condensed media obtained by shock wave techniques. The volume should be useful both to people working in the shockwave field and to others interested primarily in thermodynamic properties at high pressure. Therefore, both dynamic variables and volumetric quantities associated with the shock wave are given. The format was selected to make the volume useful in engineering as well as scientific reserch activities. Data on the elements are contained in this volume

A study on magnetoelastic properties of Tb3 (Fe28-xCox) V1.0 (x=0, 3, 6) compounds

International Nuclear Information System (INIS)

Gholizadeh, A.; Tajabor, N.; Pourarian, F.

2012-01-01

In this work, The magnetoelastic properties of polycrystalline samples of Tb 3 (Fe 28-x Co x ) V 1.0 (x=0, 3, 6) intermetallic compounds are investigated by means of linear thermal expansion and magnetostriction measurements in the temperature range of 77-515 K under applied magnetic fields up to 1.5 T. The linear thermal expansion increases with the Co content. The well-defined anomalies observed in the linear thermal expansion coefficients for Tb 3 (Fe 28-x Co x ) V 1.0 (x=0, 3, 6) compounds are associated with the magnetic ordering temperature for x=0 and spin reorientation temperatures for x=3, 6. Below transition temperatures, the value of the longitudinal magnetostriction (λ Pa ) at 1.6 T increases with Co content.

Nonlinear plasma wave models in 3D fluid simulations of laser-plasma interaction

Science.gov (United States)

Chapman, Thomas; Berger, Richard; Arrighi, Bill; Langer, Steve; Banks, Jeffrey; Brunner, Stephan

2017-10-01

Simulations of laser-plasma interaction (LPI) in inertial confinement fusion (ICF) conditions require multi-mm spatial scales due to the typical laser beam size and durations of order 100 ps in order for numerical laser reflectivities to converge. To be computationally achievable, these scales necessitate a fluid-like treatment of light and plasma waves with a spatial grid size on the order of the light wave length. Plasma waves experience many nonlinear phenomena not naturally described by a fluid treatment, such as frequency shifts induced by trapping, a nonlinear (typically suppressed) Landau damping, and mode couplings leading to instabilities that can cause the plasma wave to decay rapidly. These processes affect the onset and saturation of stimulated Raman and Brillouin scattering, and are of direct interest to the modeling and prediction of deleterious LPI in ICF. It is not currently computationally feasible to simulate these Debye length-scale phenomena in 3D across experimental scales. Analytically-derived and/or numerically benchmarked models of processes occurring at scales finer than the fluid simulation grid offer a path forward. We demonstrate the impact of a range of kinetic processes on plasma reflectivity via models included in the LPI simulation code pF3D. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Accessibility for lower hybrid waves in PBX-M

International Nuclear Information System (INIS)

Takahashi, H.; Bell, R.; Bernabei, S.; Chance, M.; Chu, T.K.; Gettelfinger, G.; Greenough, N.; Hatcher, R.; Ignat, D.; Jardin, S.; Kaita, R.; Kaye, S.; Kugel, H.; LeBlanc, B.; Manickam, J.; Okabayashi, M.; Ono, M.; Paul, S.; Perkins, F.; Sauthoff, N.; Sesnic, S.; Sun, Y.; Tighe, W.; Valeo, E.; von Goeler, S.; Dunlap, J.; England, A.; Harris, J.; Hirshman, S.; Isler, R.; Post-Zwicker, A.; Jones, S.; Kesner, J.; Luckhardt, S.; Paoletti, F.; Schmitz, L.; Tynan, G.

1993-07-01

Understanding the wave damping mechanism in the presence of a 'spectral gap' is an important issue for the current profile control using Lower Hybrid Current Drive (LHCD). The authors examine a traditional explanation based upon upshifting of the wave parallel refractive index (n parallel ) and find that there can be an upper bound in the n parallel upshift. The amount of upshift is not sufficient to bridge the spectral gap completely under some PBX-M LHCD conditions. There is experimental evidence, however, that current was driven even under such conditions. Another mechanism is also considered, based upon the 2-D velocity space dynamics coupled with a compound wave spectrum, here consisting of forward- and backward-running waves. The runaway critical speed relative to the phase speeds of these waves plays an important role in this model

Experiment for 3-component S-wave reflection survey. Part 3; Sanseibun S ha hanshaho no kiso jikken. 3

Energy Technology Data Exchange (ETDEWEB)

Kano, N; Yamaguchi, K; Yokota, T; Kiguchi, T [Geological Survey of Japan, Tsukuba (Japan)

1996-10-01

Anisotropy has been investigated using S-wave as a technique for detecting fractures. In this study, fundamental experiments were carried out with slightly changing the measuring conditions at a place where anisotropy was expected. This paper describes the fundamental data acquisition of anisotropy analysis using S-wave, and a part of the results. The experiments were conducted on the agricultural road in Yamadera district, Matsuyama-machi, Yamagata Prefecture. Two flat unpaved roads meeting at right angles were used as traverse lines. In this place, several reflection surfaces were certainly detected by P-wave, and anisotropy of S-wave was confirmed from the velocity of refracted wave of S-wave. Data were processed for individual traverse lines meeting at right angles. Firstly, signal sweeping, correlation, and vertical superposition were made. Six kinds of data were prepared, i.e., three-component receiving records of data at 0{degree} of generating direction and three-component receiving records of data at 90{degree} of generating direction. Records of T-component at 0{degree} and R-component at 90{degree} were used for processing of the seismic reflection method. These records would be considered to be data of SH-wave and SV-wave, respectively. 4 figs.

Reversal of the sign of giant magnetoresistance upon boron filling in RPd{sub 3} compounds (R=Tb,Er)

Energy Technology Data Exchange (ETDEWEB)

Pandey, Abhishek [S. N. Bose National Centre for Basic Sciences, Block-JD, Sector-III, Salt Lake, Kolkata-700098 (India); Mazumdar, Chandan; Ranganathan, R, E-mail: abhishek.phy@gmail.co, E-mail: chandan.mazumar@saha.ac.i, E-mail: r.ranganathan@saha.ac.i [Experimental Condensed Matter Physics Division, Saha Institute of Nuclear Physics, 1/AF, Bidhannagar, Kolkata-700064 (India)

2010-01-01

We report the study of magnetic and transport properties of binary intermetallic compounds RPd{sub 3} (R: Tb and Er) and boron-filled perovskite compounds RPd{sub 3}B. Our results suggest that the magnetic and transport behavior of boron-filled compositions is substantially different compared to that of undoped compounds. For example, TbPd{sub 3} and ErPd{sub 3} exhibit negative magnetoresistance, while boron-filled TbPd{sub 3}B and ErPd{sub 3}B shows positive magnetoresistance. In addition, our results also suggest that there exists a strong correlation between magnetic and electrical-transport behavior of these systems.

Transversely driven charge density waves in NbSe3

International Nuclear Information System (INIS)

Markovic, N.; Dohmen, M.A.H.; Zant, H.S.J. van der

1999-01-01

We have studied the charge density wave (CDW) transport in the presence of a single-particle current flowing transversely to the sliding direction of the CDW. The depinning threshold field was found to decrease exponentially with the transverse current, allowing the CDWs to slide even at very low bias fields. The CDW transport is ohmic in this novel, nonequilibrium regime. The results from thin NbSe 3 crystals are in excellent agreement with recent theoretical predictions. (orig.)

Plasma waves

CERN Document Server

Swanson, DG

1989-01-01

Plasma Waves discusses the basic development and equations for the many aspects of plasma waves. The book is organized into two major parts, examining both linear and nonlinear plasma waves in the eight chapters it encompasses. After briefly discussing the properties and applications of plasma wave, the book goes on examining the wave types in a cold, magnetized plasma and the general forms of the dispersion relation that characterize the waves and label the various types of solutions. Chapters 3 and 4 analyze the acoustic phenomena through the fluid model of plasma and the kinetic effects. Th

Monitoring changes in the nutritional content of ready-to-eat grain-based dessert products manufactured and purchased between 2005 and 2012.

Science.gov (United States)

Mathias, Kevin C; Ng, Shu Wen; Popkin, Barry

2015-03-01

Monitoring changes in the nutritional content of food/beverage products and shifts in consumer purchasing behaviors is needed to measure the effectiveness of efforts by both food manufacturers and policy makers to improve dietary quality in the United States. To examine changes in the nutritional content (eg, energy, saturated fat, and sugar density) of ready-to-eat (RTE) grain-based dessert (GBD) products manufactured and purchased between 2005 and 2012. Nutrition Facts panel information from commercial databases was linked to RTE GBD products purchased by households (N=134,128) in the Nielsen Homescan longitudinal dataset 2005-2012. Linear regression models were used to examine changes in the energy, saturated fat, and sugar density of RTE GBD products manufactured in each year between 2005 and 2012. Random effects models controlling for demographics, household composition/size, and geographic location were used to examine changes in household purchases of RTE GBD products (in grams) and the average energy, saturated fat, and sugar density of RTE GBD products purchased. The saturated fat density (grams/100 g) of RTE GBD products increased significantly from 6.5±0.2 in 2005 to 7.3±0.2 and 7.9±0.2 for pre-existing and newly introduced products in 2012, respectively. Between 2005 and 2012, the energy density (kilocalories/100 g) of RTE GBD products purchased decreased significantly from 433±0.2 to 422±0.2, the saturated fat density (grams/100 g) of products purchased increased significantly from 6.3±0.01 to 6.6±0.01, the sugar density (grams/100 g) of products purchased decreased significantly from 32.4±0.03 to 31.3±0.02, and household purchases of RTE GBD products (in grams) decreased by 24.1%±0.4%. These results highlight an opportunity for both food manufacturers and public health officials to develop new strategies to shift consumer purchases toward products with lower energy, saturated fat, and sugar densities in addition to decreasing overall

A Raman study of the charge-density-wave state in A(0.3)MoO(3) (A = K, Rb)

NARCIS (Netherlands)

Sagar, D. M.; Fausti, D.; Yue, S.; Kuntscher, C. A.; van Smaalen, S.; van Loosdrecht, P. H. M.

2008-01-01

We report a comparative Raman spectroscopic study of the quasi-one-dimensional charge-density-wave (CDW) systems A(0.3)MoO(3) (A = K, Rb). Temperature- and polarization-dependent experiments reveal charge-coupled vibrational Raman features. The strongly temperature-dependent collective amplitudon

Conventional and inverse magnetocaloric effect in Pr2CuSi3 and Gd2CuSi3 compounds

International Nuclear Information System (INIS)

Wang, Fang; Yuan, Feng-ying; Wang, Jin-zhi; Feng, Tang-fu; Hu, Guo-qi

2014-01-01

Highlights: • Two phase transitions in a narrow temperature range were observed and studied. • Both typical and inverse magnetocaloric effect were observed and discussed. • The inverse magnetocaloric effect was attributed to the spin-glass behavior. - Abstract: Magnetic properties and magnetocaloric effect (MCE) in Pr 2 CuSi 3 and Gd 2 CuSi 3 compounds were investigated systematically. Both Pr 2 CuSi 3 and Gd 2 CuSi 3 compounds experienced two phase transitions in a relatively narrow temperature range: first a paramagnet (PM)–ferromagnet (FM) second-order phase transition at 12 and 26 K and then a FM–spin glass (SG) transition at 6 K and 7.5 K, respectively. The magnetic entropy change (ΔS M ) was calculated based on Maxwell relation using the collected magnetization data. The maximum of ΔS M for Pr 2 CuSi 3 and Gd 2 CuSi 3 compounds was 7.6 and 5 J kg −1 K −1 , respectively, at the applied filed change of 0–5 T. The shape of the temperature dependence of ΔS M (ΔS M –T) curve was obviously different from that of the conventional magnetic materials undergoing only one typical phase transition. In the left half part of ΔS M –T curve, ΔS M is not very sensitive to the applied field and they tend to intersect with the decrease of temperature. Both typical conventional and inverse MCE behavior were observed in Gd 2 CuSi 3 , which would be originated from the two transition features at the low temperatures

Identification of slow magnetosonic wave trains and their evolution in 3-D compressible turbulence simulation

Directory of Open Access Journals (Sweden)

L. Zhang

2015-01-01

Full Text Available In solar wind, dissipation of slow-mode magnetosonic waves may play a significant role in heating the solar wind, and these modes contribute essentially to the solar wind compressible turbulence. Most previous identifications of slow waves utilized the characteristic negative correlation between δ|B| and δρ. However, that criterion does not well identify quasi-parallel slow waves, for which δ|B| is negligible compared to δρ. Here we present a new method of identification, which will be used in 3-D compressible simulation. It is based on two criteria: (1 that VpB0 (phase speed projected along B0 is around ± cs, and that (2 there exists a clear correlation of δv|| and δρ. Our research demonstrates that if vA > cs, slow waves possess correlation between δv|| and δρ, with δρ / δv|| ≈ ± ρ0 / cs. This method helps us to distinguish slow-mode waves from fast and Alfvén waves, both of which do not have this polarity relation. The criteria are insensitive to the propagation angle θk B, defined as the angle between wave vector k and B0; they can be applied with a wide range of β if only vA > cs. In our numerical simulation, we have identified four cases of slow wave trains with this method. The slow wave trains seem to deform, probably caused by interaction with other waves; as a result, fast or Alfvén waves may be produced during the interaction and seem to propagate bidirectionally away. Our identification and analysis of the wave trains provide useful methods for investigations of compressible turbulence in the solar wind or in similar environments, and will thus deepen understandings of slow waves in the turbulence.

Magnetic behaviour of a new compound, Eu{sub 2}CuSi{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Majumdar, Subham; Mallik, R; Sampathkumaran, E V [Tata Institute of Fundamental Research, Mumbai (India)

1999-07-01

As a part of our program to synthesize new ternary Eu compounds, we report here the formation of Eu{sub 2}CuSi{sub 3} for the first time and its magnetic behaviour by magnetic susceptibility, electrical-resistivity and heat-capacity measurements. This compound is found to crystallize in an AlB{sub 2}-derived hexagonal structure. The results establish that Eu ions are divalent, undergoing long-range ferromagnetic-ordering below 38 K. (author)

Inherent Limitations in Mid-Wave and Long-Wave-IR Upconversion Detector

DEFF Research Database (Denmark)

Barh, Ajanta; Tseng, Yu-Pei; Pedersen, Christian

2017-01-01

Inherent limitations in terms of optical losses, selection of nonlinear crystal(s), detection efficiency and pumping conditions in mid-wave (3-5 µm) and long-wave (8-12 µm) infrared frequency upconversion modules are investigated in this paper.......Inherent limitations in terms of optical losses, selection of nonlinear crystal(s), detection efficiency and pumping conditions in mid-wave (3-5 µm) and long-wave (8-12 µm) infrared frequency upconversion modules are investigated in this paper....

Assimilation of Wave Imaging Radar Observations for Real-Time Wave-by-Wave Forecasting

Science.gov (United States)

Haller, M. C.; Simpson, A. J.; Walker, D. T.; Lynett, P. J.; Pittman, R.; Honegger, D.

2016-02-01

It has been shown in various studies that a controls system can dramatically improve Wave Energy Converter (WEC) power production by tuning the device's oscillations to the incoming wave field, as well as protect WEC devices by decoupling them in extreme wave conditions. A requirement of the most efficient controls systems is a phase-resolved, "deterministic" surface elevation profile, alerting the device to what it will experience in the near future. The current study aims to demonstrate a deterministic method of wave forecasting through the pairing of an X-Band marine radar with a predictive Mild Slope Equation (MSE) wave model. Using the radar as a remote sensing technique, the wave field up to 1-4 km surrounding a WEC device can be resolved. Individual waves within the radar scan are imaged through the contrast between high intensity wave faces and low intensity wave troughs. Using a recently developed method, radar images are inverted into the radial component of surface slope, shown in the figure provided using radar data from Newport, Oregon. Then, resolved radial slope images are assimilated into the MSE wave model. This leads to a best-fit model hindcast of the waves within the domain. The hindcast is utilized as an initial condition for wave-by-wave forecasting with a target forecast horizon of 3-5 minutes (tens of wave periods). The methodology is currently being tested with synthetic data and comparisons with field data are imminent.

The French electricity report 2009

International Nuclear Information System (INIS)

2010-01-01

RTE is the company responsible for running the French electricity transmission system. It is a public service operator, tasked with operating, maintaining and developing the high and extra high voltage network. It guarantees the reliability and proper operation of the power network. These missions were entrusted to it by the Law of 10 February 2000. With 100,000 km of lines between 63,000 and 400,000 volts and 45 cross-border lines, the network operated by RTE is the biggest in Europe. In 2008, RTE posted turnover of euros 4,221 m and currently employs around 8,500 staff. RTE, by virtue of the missions entrusted to it by the Law of 10 February 2000, is the central player in the French power system. For the purpose of maintaining the real time balance between supply and demand, and managing contractual relations with customers connected to its network, RTE monitors all the electrical energy that enters and leaves the public transmission system. Through its management of the 45 interconnection lines linking France with its neighbours, RTE also tracks all import and export data, on behalf of players in the French and European electricity market. RTE constantly records and examines data provided by all market players. Using the data, monthly and annually, it publishes exhaustive figures for the French power system (demand, generation, imports and exports), which offer the only truly accurate reflection of the real state of the sector's economy. This report presents these figures for the year 2009. Contents: 1 - French electricity demand down by 1.6% on 2008; 2 - A drop in French electricity generation; 3 - The balance of cross-border exchanges falls, but remains positive; 4 - RTE continues to invest in a robust network capable of keeping up with developments in the electricity industry; 5 - Appendix 1: New infrastructures on the RTE network in 2009; 6 - Appendix 2: Electricity quality; 7 - Appendix 3: Mature market mechanisms

Rapid determination of floral aroma compounds of lilac blossom by fast gas chromatography combined with surface acoustic wave sensor.

Science.gov (United States)

Oh, Se Yeon; Shin, Hyun Du; Kim, Sung Jean; Hong, Jongki

2008-03-07

A novel analytical method using fast gas chromatography combined with surface acoustic wave sensor (GC/SAW) has been developed for the detection of volatile aroma compounds emanated from lilac blossom (Syringa species: Syringa vulgaris variginata and Syringa dilatata). GC/SAW could detect and quantify various fragrance emitted from lilac blossom, enabling to provide fragrance pattern analysis results. The fragrance pattern analysis could easily characterize the delicate differences in aromas caused by the substantial difference of chemical composition according to different color and shape of petals. Moreover, the method validation of GC/SAW was performed for the purpose of volatile floral actual aroma analysis, achieving a high reproducibility and excellent sensitivity. From the validation results, GC/SAW could serve as an alternative analytical technique for the analysis of volatile floral actual aroma of lilac. In addition, headspace solid-phase microextraction (HS-SPME) GC-MS was employed to further confirm the identification of fragrances emitted from lilac blossom and compared to GC/SAW.

A common behaviour of thermoelectric layered cobaltites: incommensurate spin density wave states in [Ca2Co4/3Cu2/3O4]0.62[CoO2] and [Ca2CoO3]0.62[CoO2

International Nuclear Information System (INIS)

Sugiyama, J; Brewer, J H; Ansaldo, E J; Itahara, H; Dohmae, K; Xia, C; Seno, Y; Hitti, B; Tani, T

2003-01-01

Magnetism of a misfit layered cobaltite [Ca 2 Co 4/3 Cu 2/3 O 4 ] x RS [CoO 2 ] (x ∼ 0.62, RS denotes a rocksalt-type block) was investigated by a positive muon spin rotation and relaxation (μ + SR) experiment. A transition to an incommensurate (IC) spin density wave (SDW) state was found below 180 K (= T C on ); and a clear oscillation due to a static internal magnetic field was observed below 140 K(= T C ). Furthermore, an anisotropic behaviour of the zero-field μ + SR experiment indicated that the IC-SDW lies in the a-b plane, with oscillating moments directed along the c axis. These results were quite similar to those for the related compound [Ca 2 CoO 3 ] 0.62 RS [CoO 2 ], i.e., Ca 3 Co 4 O 9 . Since the IC-SDW field in [Ca 2 Co 4/3 Cu 2/3 O 4 ] 0.62 RS [CoO 2 ] was approximately the same as those in pure and doped [Ca 2 CoO 3 ] 0.62 RS [CoO 2 ], it was concluded that the IC-SDW exists in the [CoO 2 ] planes

Non-periodic homogenization of 3-D elastic media for the seismic wave equation

Science.gov (United States)

Cupillard, Paul; Capdeville, Yann

2018-05-01

Because seismic waves have a limited frequency spectrum, the velocity structure of the Earth that can be extracted from seismic records has a limited resolution. As a consequence, one obtains smooth images from waveform inversion, although the Earth holds discontinuities and small scales of various natures. Within the last decade, the non-periodic homogenization method shed light on how seismic waves interact with small geological heterogeneities and `see' upscaled properties. This theory enables us to compute long-wave equivalent density and elastic coefficients of any media, with no constraint on the size, the shape and the contrast of the heterogeneities. In particular, the homogenization leads to the apparent, structure-induced anisotropy. In this paper, we implement this method in 3-D and show 3-D tests for the very first time. The non-periodic homogenization relies on an asymptotic expansion of the displacement and the stress involved in the elastic wave equation. Limiting ourselves to the order 0, we show that the practical computation of an upscaled elastic tensor basically requires (i) to solve an elastostatic problem and (ii) to low-pass filter the strain and the stress associated with the obtained solution. The elastostatic problem consists in finding the displacements due to local unit strains acting in all directions within the medium to upscale. This is solved using a parallel, highly optimized finite-element code. As for the filtering, we rely on the finite-element quadrature to perform the convolution in the space domain. We end up with an efficient numerical tool that we apply on various 3-D models to test the accuracy and the benefit of the homogenization. In the case of a finely layered model, our method agrees with results derived from Backus. In a more challenging model composed by a million of small cubes, waveforms computed in the homogenized medium fit reference waveforms very well. Both direct phases and complex diffracted waves are

Magnetic and magnetocaloric properties of HoCr0.75Fe0.25O3 compound

Science.gov (United States)

Kotnana, Ganesh; Babu, P. D.; Jammalamadaka, S. Narayana

2018-05-01

We report on the magnetic and magnetocaloric properties of HoCr0.75Fe0.25O3 compound around the Néel temperature (TN), which is due to Cr3+ ordering. Susceptibility (χ) vs. temperature (T) graph of HoCr0.75Fe0.25O3 compound infer two transitions due to the ordering of Cr3+ moments (TN ˜ 155 K) and Ho3+ moments (TNHo ˜ 8 K). Magnetic entropy (-ΔSM) value of 1.14 J kg-1 K-1 around 157.5 K with a magnetic field (H) of 90 kOe is attributed to antiferromagnetic (AFM) ordering of Cr3+ moments. A maximum value of adiabatic temperature (ΔTad) ˜ 0.41 K around TN is obtained and is found to increases with applied magnetic field. Negative slope for H/M vs. M2 graph is evident for HoCr0.75Fe0.25O3 compound below TN, which indicates the first order phase transition. Quantified values of -ΔSM and ΔTad open the way to explore rare earth orthochromites for the MCE properties and refrigeration applications.

Chapter 4: Pulsating Wave Loads Section 4.3: 3D Effects Force Reduction of Short-Crested Non-Breaking Waves on Caissons

DEFF Research Database (Denmark)

Burcharth, Hans F.; Liu, Zhou

1999-01-01

The effect of wave short-crestedness on the horizontal wave force on a caisson is twofold. The one is the force reduction due to the reduction of point pressure on the caisson, named point-pressure reduction. The other is the force reduction due to the fact that the peak pressures do not occur si...

Modeling of Mud-Wave Interaction: Mud-Induced Wave Transport & Wave-Induced Mud Transport

National Research Council Canada - National Science Library

Winterwerp, Johan C

2007-01-01

.... Also a new rheological model has been proposed to describe liquefaction of soft mud by waves, and the subsequent strength recovery after the passage of the waves. A scheme is presented on how to implement these formulations in Delft3D.

Numerical experiment for nonlinear full-wave tomography. 3; Hisenkei full wave tomography no suchi jikken

Energy Technology Data Exchange (ETDEWEB)

Tsuchiya, T [Dia Consultants Company, Tokyo (Japan)

1996-10-01

Nonlinear full-wave tomography (FWT) is under investigation to improve the estimation accuracy of Vp/Vs distributions. Full-wave tomography is one of the underground structure exploration methods mainly using Tarantola`s nonlinear local optimization method (LOM). Numerical experiment for FWT was carried out assuming relatively weak nonlinear underground structure. In the case of inversion by local optimization method, adequate preconditioning is important. Utilization of geological information is also effective in estimating low-frequency components of a model. As far as data are obtained under proper observation arrangement, even in actual field, precise estimation of Vp/Vs distributions is possible by FWT using explosion in a hole as wave source. In full-wave tomography, selection of observation arrangement is essential for both Vp and Vs. However, the proper arrangement is different between Vp and Vs. Approach to different analyses for Vp and Vs is also necessary by using only proper data for Vp and Vs among obtained data sets. 4 figs.

Investigating the generation of Love waves in secondary microseisms using 3D numerical simulations

Science.gov (United States)

Wenk, Stefan; Hadziioannou, Celine; Pelties, Christian; Igel, Heiner

2014-05-01

Longuet-Higgins (1950) proposed that secondary microseismic noise can be attributed to oceanic disturbances by surface gravity wave interference causing non-linear, second-order pressure perturbations at the ocean bottom. As a first approximation, this source mechanism can be considered as a force acting normal to the ocean bottom. In an isotropic, layered, elastic Earth model with plain interfaces, vertical forces generate P-SV motions in the vertical plane of source and receiver. In turn, only Rayleigh waves are excited at the free surface. However, several authors report on significant Love wave contributions in the secondary microseismic frequency band of real data measurements. The reason is still insufficiently analysed and several hypothesis are under debate: - The source mechanism has strongest influence on the excitation of shear motions, whereas the source direction dominates the effect of Love wave generation in case of point force sources. Darbyshire and Okeke (1969) proposed the topographic coupling effect of pressure loads acting on a sloping sea-floor to generate the shear tractions required for Love wave excitation. - Rayleigh waves can be converted into Love waves by scattering. Therefore, geometric scattering at topographic features or internal scattering by heterogeneous material distributions can cause Love wave generation. - Oceanic disturbances act on large regions of the ocean bottom, and extended sources have to be considered. In combination with topographic coupling and internal scattering, the extent of the source region and the timing of an extended source should effect Love wave excitation. We try to elaborate the contribution of different source mechanisms and scattering effects on Love to Rayleigh wave energy ratios by 3D numerical simulations. In particular, we estimate the amount of Love wave energy generated by point and extended sources acting on the free surface. Simulated point forces are modified in their incident angle, whereas

The covalent effect on the energy levels of d3 ions in tetragonal compounds

International Nuclear Information System (INIS)

Li, Dong-Yang; Du, Mao-Lu

2015-01-01

For d 3 ions in covalent compounds with tetragonal symmetry, this paper presents a complete energy matrix, in which the different covalence of t 2 and e orbitals is considered not only in the electrostatic repulsions part of energy matrix elements but also in the crystal-field potential part of energy matrix elements. With taking and no taking the crystal field parameter B 00 0 into account, the effect of covalence on the energy levels of d 3 ions system were investigated, respectively. The investigation shows that it is very necessary for considering the different covalence of t 2 and e orbitals in both electrostatic repulsions part and crystal-field potential part when the optical properties of d 3 ions in strong covalent compounds with tetragonal symmetry is investigated. On the other hand, the crystal field parameter B 00 0 has a significant effect on the energy levels, and should be considered in investigations of d 3 ions in strong covalent compounds with tetragonal symmetry. Application to calculating the energy levels for Co 2+ in CdGa 2 Se 4 , the calculated results are in agreement with the experiment data

The evaluation of the microbial safety of fresh ready-to-eat vegetables produced by different technologies in Italy.

Science.gov (United States)

De Giusti, M; Aurigemma, C; Marinelli, L; Tufi, D; De Medici, D; Di Pasquale, S; De Vito, C; Boccia, A

2010-09-01

The study was performed to evaluate the safety of whole and RTE vegetables and to investigate the effectiveness of different preventive strategies for the quality assurance of RTE vegetables collected from three Italian production systems. Producer 1, applied a strict system in compliance with GAP- GMP - HACCP, Producer 2 used chlorine disinfection at a second washing step, and Producer 3 using a physical microbial stabilization. During the period 2005-2007, a total of 964 samples including whole vegetables and RTE salads, collected from three different producers in central Italy, were analysed to quantify the aerobic mesophilic count (AMC) and Escherichia coli, and for the presence of Salmonella spp, Listeria monocytogenes, E. coli O157:H7, hepatitis A virus and Norovirus (NoV). None of the whole vegetable samples were positive for L. monocytogenes, E. coli O157:H7, HAV and NoV; however, a low prevalence of Salmonella was found. No pathogens were detected with cultural methods in any of the RTE vegetables analysed, only two RTE samples were positive for L. monocytogenes with PCR, but were not confirmed by the cultural method. The median values of AMC in RTE vegetables measured 24 h after packaging were statistically different among the 3 producers (5·4 × 10(6), 1·5 × 10(7) and 3·7 × 10(7) CFU g(-1), respectively; P=0·011). The lowest level was detected in Producer 1. The products that were processed applying rigorously GAP, GMP and HACCP showed a better microbiological quality than those processed with chemical or physical stabilization. STUDY SIGNIFICANCE AND IMPACT: The results of the study evidenced the efficacy of GAP, GMP and HACCP in improving microbiological quality of whole and RTE vegetables. © 2010 The Authors. Journal compilation © 2010 The Society for Applied Microbiology.

Diazo Compounds as Highly Tunable Reactants in 1,3-Dipolar Cycloaddition Reactions with Cycloalkynes†

Science.gov (United States)

McGrath, Nicholas A.

2012-01-01

Diazo compounds, which can be accessed directly from azides by deimidogenation, are shown to be extremely versatile dipoles in 1,3-dipolar cycloaddition reactions with a cyclooctyne. The reactivity of a diazo compound can be much greater or much less than its azide analog, and is enhanced markedly in polar-protic solvents. These reactivities are predictable from frontier molecular orbital energies. The most reactive diazo compound exhibited the highest known second-order rate constant to date for a dipolar cycloaddition with a cycloalkyne. These data provide a new modality for effecting chemoselective reactions in a biological context. PMID:23227302

Backward elastic p3He-scattering and high momentum components of 3He wave function

International Nuclear Information System (INIS)

Uzikov, Yu.N.

1998-01-01

It is shown that owing to a dominance of np-pair transfer mechanism of backward elastic p 3 He-scattering for incident proton kinetic energies T p > 1 GeV the cross section of this process is defined mainly by the values of the Faddeev component of the wave function of 3 He nucleus, φ 23 (q 23 , p 1 ), at high relative momenta q 23 > 0.6 GeV/c of the NN-pair in the 1 S 0 -state and at low spectator momenta p 1 ∼ 0 - 0.2 GeV/c

First-principles study of the amorphous In3SbTe2 phase change compound

Science.gov (United States)

Los, Jan H.; Kühne, Thomas D.; Gabardi, Silvia; Bernasconi, Marco

2013-11-01

Ab initio molecular dynamics simulations based on density functional theory were performed to generate amorphous models of the phase change compound In3SbTe2 by quenching from the melt. In-Sb and In-Te are the most abundant bonds with only a minor fraction of Sb-Te bonds. The bonding geometry in the amorphous phase is, however, strongly dependent on the density in the range 6.448-5.75 g/cm3 that we investigated. While at high density the bonding geometry of In atoms is mostly octahedral-like as in the cubic crystalline phase of the ternary compound In3SbTe2, at low density we observed a sizable fraction of tetrahedral-like geometries similar to those present in the crystalline phase of the two binary compounds InTe and InSb that the ternary system can be thought to be made of. We show that the different ratio between octahedral-like and tetrahedral-like bonding geometries has fingerprints in the optical and vibrational spectra.

Wave properties near the subsolar magnetopause - Pc 3-4 energy coupling for northward interplanetary magnetic field

Science.gov (United States)

Song, P.; Russell, C. T.; Strangeway, R. J.; Wygant, J. R.; Cattell, C. A.; Fitzenreiter, R. J.; Anderson, R. R.

1993-01-01

Strong slow mode waves in the Pc 3-4 frequency range are found in the magnetosheath close to the magnetopause. We have studied these waves at one of the ISEE subsolar magnetopause crossings using the magnetic field, electric field, and plasma measurements. We use the pressure balance at the magnetopause to calibrate the Fast Plasma Experiment data versus the magnetometer data. When we perform such a calibration and renormalization, we find that the slow mode structures are not in pressure balance and small scale fluctuations in the total pressure still remain in the Pc 3-4 range. Energy in the total pressure fluctuations can be transmitted through the magnetopause by boundary motions. The Poynting flux calculated from the electric and magnetic field measurements suggests that a net Poynting flux is transmitted into the magnetopause. The two independent measurements show a similar energy transmission coefficient. The transmitted energy flux is about 18 percent of the magnetic energy flux of the waves in the magnetosheath. Part of this transmitted energy is lost in the sheath transition layer before it enters the closed field line region. The waves reaching the boundary layer decay rapidly. Little wave power is transmitted into the magnetosphere.

Design wave estimation considering directional distribution of waves

Digital Repository Service at National Institute of Oceanography (India)

SanilKumar, V.; Deo, M.C

.elsevier.com/locate/oceaneng Technical Note Design wave estimation considering directional distribution of waves V. Sanil Kumar a,C3 , M.C. Deo b a OceanEngineeringDivision,NationalInstituteofOceanography,Donapaula,Goa-403004,India b Civil... of Physical Oceanography Norway, Report method for the routine 18, 1020–1034. ocean waves. Division of No. UR-80-09, 187 p. analysis of pitch and roll Conference on Coastal Engineering, 1. ASCE, Taiwan, pp. 136–149. Deo, M.C., Burrows, R., 1986. Extreme wave...

Bulk superconducting gap of V_3Si studied by low-energy ultrahigh-resolution photoemission spectroscopy

International Nuclear Information System (INIS)

Sato, T.; Souma, S.; Nakayama, K.; Sugawara, K.; Toyota, N.; Takahashi, T.

2016-01-01

Highlights: • We report ultrahigh-resolution photoemission spectroscopy of A15 compound V_3Si. • We found a sharp quasiparticle peak due to superconducting-gap opening. • The surface metallic component is negligibly small in the bulk-sensitive measurement. • We show that V_3Si is a single-gap s-wave superconductor. - Abstract: We have performed low-energy ultrahigh-resolution photoemission spectroscopy (PES) of A15 compound V_3Si with a xenon-plasma discharge lamp to elucidate the bulk superconducting gap. Below the superconducting transition temperature (T_c = 15.9 K), we found a sharp quasiparticle peak at the Fermi level in the PES spectrum. The gap spectrum is well fitted by a single s-wave superconducting-gap function together with a dip structure at ∼30 meV suggestive of a strong electron-phonon coupling. The anomalous in-gap state previously observed in the PES measurement with high-energy photons is absent or negligibly small in the present bulk-sensitive measurement. The present PES result shows that V_3Si is a single-gap s-wave superconductor.

Waves in plasmas (part 1 - wave-plasma interaction general background)

International Nuclear Information System (INIS)

Dumont, R.

2004-01-01

This document gathers a series of transparencies presented in the framework of the week-long lectures 'hot plasmas 2004' and dedicated to the physics of wave-plasma interaction. The structure of this document is as follows: 1) wave and diverse plasmas, 2) basic equations (Maxwell equations), 3) waves in a fluid plasma, and 4) waves in a kinetic plasma (collisionless plasma)

Multiple external hazards compound level 3 PSA methods research of nuclear power plant

Science.gov (United States)

Wang, Handing; Liang, Xiaoyu; Zhang, Xiaoming; Yang, Jianfeng; Liu, Weidong; Lei, Dina

2017-01-01

2011 Fukushima nuclear power plant severe accident was caused by both earthquake and tsunami, which results in large amount of radioactive nuclides release. That accident has caused the radioactive contamination on the surrounding environment. Although this accident probability is extremely small, once such an accident happens that is likely to release a lot of radioactive materials into the environment, and cause radiation contamination. Therefore, studying accidents consequences is important and essential to improve nuclear power plant design and management. Level 3 PSA methods of nuclear power plant can be used to analyze radiological consequences, and quantify risk to the public health effects around nuclear power plants. Based on multiple external hazards compound level 3 PSA methods studies of nuclear power plant, and the description of the multiple external hazards compound level 3 PSA technology roadmap and important technical elements, as well as taking a coastal nuclear power plant as the reference site, we analyzed the impact of off-site consequences of nuclear power plant severe accidents caused by multiple external hazards. At last we discussed the impact of off-site consequences probabilistic risk studies and its applications under multiple external hazards compound conditions, and explained feasibility and reasonableness of emergency plans implementation.

Antioxidant Phenolic Compounds from Pu-erh Tea

Directory of Open Access Journals (Sweden)

Shu Shan Du

2012-11-01

Full Text Available Eight compounds were isolated from the water extract of Pu-erh tea and their structures were elucidated by NMR and MS as gallic acid (1, (+-catechin (2, (−-epicatechin (3, (−-epicatechin-3-O-gallate (4, (−-epigallocatechin-3-O-gallate (5, (−-epiafzelechin- 3-O-gallate (6, kaempferol (7, and quercetin (8. Their in vitro antioxidant activities were assessed by the DPPH and ABTS scavenging methods with microplate assays. The relative order of DPPH scavenging capacity for these compounds was compound 8 > compound 7 > compound 1 > compound 6 > compound 4 ≈ compound 5 > compound 2 > VC (reference > compound 3, and that of ABTS scavenging capacity was compound 1 > compound 2 > compound 7 ≈ compound 8 > compound 6 > compound 5 > compound 4 > VC (reference > compound 3. The results showed that these phenolic compounds contributed to the antioxidant activity of Pu-erh tea.

A survey of total hydrocyanic acid content in ready-to-eat cassava-based chips obtained in the Australian market in 2008.

Science.gov (United States)

Miles, David; Jansson, Edward; Mai, My Chi; Azer, Mounir; Day, Peter; Shadbolt, Craig; Stitt, Victoria; Kiermeier, Andreas; Szabo, Elizabeth

2011-06-01

Cassava (Manihot esculenta Crantz) is a widely consumed food in the tropics that naturally contains cyanogenic glycosides (cyanogens, mainly composed of linamarin, acetone cyanohydrin, and hydrocyanic acid). If cassava is not adequately processed to reduce the level of cyanogens prior to consumption, these compounds can lead to the formation of hydrocyanic acid in the gut. Exposure to hydrocyanic acid can cause symptoms ranging from vomiting and abdominal pain to coma and death. In 2008, a survey of ready-to-eat (RTE) cassava-based snack foods was undertaken to determine levels of cyanogens measured as total hydrocyanic acid. This survey was undertaken in response to the New South Wales Food Authority being alerted to the detection of elevated levels of cyanogens in an RTE cassava-based snack food. This survey took 374 samples of RTE cassava chips available in the Australian marketplace. Significant variation in the levels of total hydrocyanic acid were observed in the 317 samples testing positive for cyanogens, with levels ranging from 13 to 165 mg of HCN equivalents per kg (mean value, 64.2 mg of HCN eq/kg for positive samples). The results from this survey serve as a timely warning for manufacturers of RTE cassava chips and other cassava-based snack foods to ensure there is tight control over the levels of cyanogens in the cassava ingredient. Evidence from this survey contributed to an amendment to the Australia New Zealand Food Standards Code, which now prescribes a maximum level for hydrocyanic acid in RTE cassava chips of 10 mg of HCN eq/kg, which aligns with the Codex Alimentarius Commission international standard for edible cassava flour.

Generation of shock/discontinuity compound structures through magnetic reconnection in the geomagnetic tail

Energy Technology Data Exchange (ETDEWEB)

Weng, C. J. [Department of Physics, National Cheng Kung University, Tainan 701, Taiwan (China); Institute of Space Science, National Central University, Jungli 320, Taiwan (China); Lin, C. C. [Chemical Systems Research Division, Chung-Shan Institute of Science and Technology, Longtan 325, Taiwan (China); Lee, L. C. [Institute of Earth Science, Academia Sinica, Nankang 115, Taiwan (China); Institute of Space Science, National Central University, Jungli 320, Taiwan (China); Chao, J. K. [Institute of Space Science, National Central University, Jungli 320, Taiwan (China)

2012-12-15

We use 1-D hybrid code to simulate the generation and evolution of MHD discontinuities associated with magnetic reconnection in a current sheet. It is found that the leakage of slow shock (SS) downstream particles to upstream region tends to increase the ion parallel temperature and temperature anisotropy with {beta}{sub i||}/{beta}{sub i Up-Tack } Much-Greater-Than 1, where {beta}{sub i||}({beta}{sub i Up-Tack }) is the ion parallel (perpendicular) beta. As a result, the propagation speed of rotational discontinuity (RD) is highly reduced and RD becomes attached to SS, leading to formation of various compound structures in the reconnection outflow region. Four types of compound structure are found in our simulations: (a) RD-SS compound structure: the RD is attached to the leading part of SS, (b) SS-RD (DD) compound structure: RD is attached to the rear part of SS, (c) SS-RD-SS compound structure: RD is trapped inside SS, and (d) switch-off slow shock (SSS) with a rotational wave train. The type of compound structure generated depends on initial ion beta {beta}{sub i0} and magnetic shear angle {phi}. RD tends to move in front of SS to form an RD-SS compound structure for cases with low {beta}{sub i0}. RD stays behind SS and form an SS-RD (DD) compound structure for large {beta}{sub i0}. The SS-RD-SS compound structure is formed for intermediate values of {beta}{sub i0}. When the shear angle is 180 Degree-Sign , SSS with a wave train is formed.

Vibrational spectroscopic and gravimetric study of some Hofmann-CBA-Type Host and host-guest compounds

International Nuclear Information System (INIS)

Aytekin, M.A.

2005-01-01

In this study, similar to Hofmann type M(C 4 H 7 NH 2 ) 2 Ni(CN) 4 (M=Ni or Co) host and M(C 4 H 7 NH 2 ) 2 Ni(CN) 4 .nG (M=Ni or Co; G=benzene, 1,2-, 1,3-dichlorobenzene; n=the number of guest) hostguest compounds were obtained chemically. The infrared spectra of these compounds were recorded with FT-IR spectrometer in the spectroscopic region of 4000cm-1-400cm-1. From these spectra the vibrational wave numbers of ligand molecule, Ni(CN) 4 2 - ion and guest molecules were determined. The absorption and the liberation processes of the guest molecules in the host compounds were examined at room temperature by gravimetric method. Otherwise, it was seen that the molecular structure was supported by making instrumental analysis of host and some host-guest compounds. By analysing the structures of host and host-guest compounds were found to be similar to those of Hofmann type compounds, ligand molecule cyclobutylamine were coordinated to M metal atom from cyclobutylamine's nitrogen atom, the guest molecules were imprisoned in the structural cavities between the sheets

Technology and optical characterization of luminophore coordination compounds Eu(o-MBA)3Phen and NC PEPC/Eu(o-MBA)3Phen

Science.gov (United States)

Bordian, Olga; Verlan, Victor; Culeac, Ion; Iovu, Mihail; Zubareva, Vera

2016-12-01

Were obtained a new nanocomposite (NC) based on poly N-epoxy prolyl carbazol (PEPC) and the coordination compound luminophore Eu(o-MBA)3Phen, where o-MBA is o- methylbenzoic acid and Phen - phenanthroline. Nanocrystals of Eu(o-MBA)3Phen with the dimensions 50 nm were uniformly incorporated into the PEPC polymer matrix with various concentrations. The absorption spectra of coordination compounds and thin layers of NC PEPC/Eu(o-MBA)3Phen revealed 1 intensive absorption bands at 2.02 eV. Photoluminescence (PL) spectra showed an intense red luminescence at 578 - 699 nm, which is assigned to the transitions 4D0->7Fi (i= 0,1,2 3 4) in the 4f-shell of the Eu3+ ion.

High resolution study of Kβ' and Kβ1,3 X-ray emission lines from Mn-compounds

International Nuclear Information System (INIS)

Limandri, S.; Ceppi, S.; Tirao, G.; Stutz, G.; Sanchez, C.G.; Riveros, J.A.

2010-01-01

High-resolution Kβ emission spectra of several manganese compounds were measured in order to characterize the dependence of the Kβ' and Kβ 1,3 features, on the chemical environment. High resolution spectra were obtained using a non-conventional spectrometer based on quasi-back-diffraction geometry at National Synchrotron Light Laboratory (LNLS). It was found that the energy of the Kβ' satellite structure relative to the main Kβ 1,3 line decreases linearly with the formal oxidation state for Mn-O systems. A noticeable dispersion of the relative Kβ' energy for different Mn 2+ compounds could be observed. The dependence of the Kβ' satellite line on the net charge and the effective 3d spin in Mn 2+ compounds was investigated. Calculations of the net charge and the effective 3d spin were performed within the density-functional theory using the package SIESTA. A direct relation between this dispersion and the effective Mn 3d spin was found.

Damage detection in composite panels based on mode-converted Lamb waves sensed using 3D laser scanning vibrometer

Science.gov (United States)

Pieczonka, Łukasz; Ambroziński, Łukasz; Staszewski, Wiesław J.; Barnoncel, David; Pérès, Patrick

2017-12-01

This paper introduces damage identification approach based on guided ultrasonic waves and 3D laser Doppler vibrometry. The method is based on the fact that the symmetric and antisymmetric Lamb wave modes differ in amplitude of the in-plane and out-of-plane vibrations. Moreover, the modes differ also in group velocities and normally they are well separated in time. For a given time window both modes can occur simultaneously only close to the wave source or to a defect that leads to mode conversion. By making the comparison between the in-plane and out-of-plane wave vector components the detection of mode conversion is possible, allowing for superior and reliable damage detection. Experimental verification of the proposed damage identification procedure is performed on fuel tank elements of Reusable Launch Vehicles designed for space exploration. Lamb waves are excited using low-profile, surface-bonded piezoceramic transducers and 3D scanning laser Doppler vibrometer is used to characterize the Lamb wave propagation field. The paper presents theoretical background of the proposed damage identification technique as well as experimental arrangements and results.

3M"T"M neutron quench. Compounds with substantial water solubility and boron content

International Nuclear Information System (INIS)

Cook, Kevin S.; Blake, Alex B.; Neef, C. Jody

2014-01-01

Of the two naturally occurring isotopes of boron ("1"1B 80%, "1"0B 20%), "1"0B is a good neutron absorber with a thermal neutron absorption cross section of ∼3800 barns. The ability to absorb thermal neutrons while producing benign reaction products makes boron an ideal atom to aid in the control and arrest of the fission reaction in nuclear power reactors. In current practice, boric acid and sodium pentaborate are commonly used as neutron absorbers in the water regime of active and passive safety systems. 3M"T"M Neutron Quench compounds have been developed to be applied in situations where criticality control needs exceed normal control methods. In this type of situation these compounds have several advantages over commonly used neutron absorbers like boric acid: Boron Content; compounds contain up to 80 wt% boron compared to 16 wt% for boric acid and sodium pentaborate. Solubility; >16 g B/100 g solution compared to 0.6 g B/100 g solution for boric acid at 25°C. pH neutrality; compounds demonstrate pH neutrality even in concentrated solutions. Thermal Stability; Compounds are stable as solids at temperatures greater than 500°C. Corrosiveness; Electrochemical corrosion rate studies have indicated that these compounds are significantly less corrosive than boric acid. Use of 3M"T"M Neutron Quench can lead to reduction in emergency shutdown pool size, reduce or remove the necessity for pool heating and heat tracing of lines, allow for more rapid introduction of the absorber in emergency situations or be used in other applications where significant neutron control is necessary. (author)

Synthesis and Molecular Structures of Two [1,4-bis(3-pyridyl-2,3-diazo-1,3-butadiene]-dichloro-Zn(II Coordination Polymers

Directory of Open Access Journals (Sweden)

Hsin-Ta Wang

2006-08-01

Full Text Available Two novel coordination polymers with 3D metal-organic frameworks (MOFs have been synthesized by reacting 1,4-bis(3-pyridyl-2,3-diazo-1,3-butadiene (L with zinc dichloride. Both compounds have the same repeating unit consisting of a distorted tetrahedral Zn(II center coordinated by two chlorides and two pyridyl nitrogen atoms of two bridging bismonodentate L ligands, however, different structural conformations have been found, one forming a helical chain and the other producing a square-wave chain. The intermolecular C−H···Cl hydrogen bonds in 1 and 2 play important roles in the formation of three-dimensional coordination polymers. Compound 1 crystallized in an orthorhombic space group Pna21 with a = 7.9652(3, b = 21.4716(7, c = 8.2491(3Å, V = 1410.81(9 Å 3 and Z = 4. Compound 2 crystallized in a monoclinic space group P21/n with a = 9.1752(3, b = 14.5976(4, c = 10.3666(3 Å , β = 98.231(2°, V = 1374.16(7 Å 3 and Z = 4.

Theoretical study on guided wave propagation in (1 - x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (x = 0.29 and 0.33) single crystal plates

International Nuclear Information System (INIS)

Chen Chuanwen; Zhang Rui; Cao Wenwu

2009-01-01

The propagation of guided waves in free standing (1 - x)Pb(Mg 1/3 Nb 2/3 )O 3 -xPbTiO 3 [PMN-xPT] (x = 0.29 or 0.33) single crystal plates has been studied theoretically. The polar directions are in the (111) family directions of the cubic reference coordinates but the crystals are being polarized along [0 0 1] c , [0 1 1] c and [1 1 1] c of the cubic reference directions so that the effective microscopic symmetries are 4mm, mm2 and 3m, respectively. Multiple mode couplings appear in the dispersion curves for both the symmetric and the antisymmetric Lamb and shear horizontal modes. The velocities of most guided waves decrease rapidly with frequency. Then, after passing a minimum, they begin to increase with frequency and eventually saturate to the shear wave velocity v sz (or v 1 = 3507 m s -1 for [1 1 1] c polarized sample). For a [1 1 1] c polarized single domain PMN-0.33PT sample, the S 1 mode instead of the S 0 mode approaches the Rayleigh velocity v R at high frequencies.

Studies of Gravity Waves Using Michelson Interferometer Measurements of OH (3-1) Bands

Science.gov (United States)

Won, Young-In; Cho, Young-Min; Lee, Bang Yong; Kim, J.

2001-06-01

As part of a long-term program for polar upper atmospheric studies, temperatures and intensities of the OH (3-1) bands were derived from spectrometric observations of airglow emissions over King Sejong station (62.22o S, 301.25o E). These measurements were made with a Michelson interferometer to cover wavelength regions between 1000 nm and 2000 nm. A spectral analysis was performed to individual nights of data to acquire information on the waves in the upper mesosphere/lower thermosphere. It is assumed that the measured fluctuations in the intensity and temperature of the OH (3-1) airglow were caused by gravity waves propagating through the emission layer. Correlation of intensity and temperature variation revealed oscillations with periods ranging from 2 to 9 hours. We also calculated Krassovsky's parameter and compared with published values.

Electromagnetic Wave Absorption Property of Graphene with FeO4 Nanoparticles.

Science.gov (United States)

Yang, Cheng; Dai, Shenglong; Zhang, Xiaoyan; Zhao, Tianyu; Yan, Shaojiu; Zhao, Xiuying

2016-02-01

Nanomaterials consisting of various ratios of Fe3O4 and graphene (defined C-Fe3O4/GR) were pre- pared by an in situ coordination complex hydro-thermal synthesis method. The structure and morphology of the nanomaterials C-Fe3O4/GR obtained were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). It was found that the Fe3O4 nanoparticles distributed on the surfaces of graphene, and had a spinel structure and a uniform chemical phase when the weight ratios of Fe3O4 to graphene oxide (GO) were 9:1 or 9:2. It was suggested that GO had been successfully reduced to graphene and the Fe3O4 nanoparticles were chemically bonded to graphene. The SQUID vibrating sample magnetometer (SQUID-VSM) indicated that the maximum of the saturation magnetization was 83.6 emmicro g(-1) when the mass ratio of Fe3O4 to GO was 9:2. Electromagnetic wave absorption showed that the chemical compound of Fe3O4 and graphene had a better electromagnetic property than the mechanical blend of Fe3O4 and graphene (M-Fe3O4/GR). The C-Fe3O4/GR had a reflection loss larger than -10 dB in the frequency range 12.9-17.0 GHz for an absorber thickness of 3 mm, and a maximum reflection loss of -12.3 dB at 14.8 GHz and a maximum reflection loss of -31.2 dB at 10.5 GHz for an absorber thickness of 10 mm. Theoretical analysis showed that the electromagnetic wave absorption behavior obeyed the quarter-wave principles. These results showed that the C-Fe3O4/GR nanomaterials can meet the requirements for some engineering applications, showing great application potential in electromagnetic wave absorption.

Thermoelectric properties of quaternary (Bi,Sb){sub 2}(Te,Se){sub 3} compound

Energy Technology Data Exchange (ETDEWEB)

Lu, Pengfei, E-mail: photon.bupt@gmail.com [State Key Laboratory of Information Photonics and Optical Communications, Ministry of Education, Beijing University of Posts and Telecommunications, P.O. Box 72, Beijing 100876 (China); Li, Yiluan; Wu, Chengjie; Yu, Zhongyuan; Cao, Huawei; Zhang, Xianlong; Cai, Ningning; Zhong, Xuxia [State Key Laboratory of Information Photonics and Optical Communications, Ministry of Education, Beijing University of Posts and Telecommunications, P.O. Box 72, Beijing 100876 (China); Wang, Shumin [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Photonics Laboratory, Department of Microtechnology and Nanoscience, Chalmers University of Technology, 41296 Gothenburg (Sweden)

2014-01-25

Highlights: • Sb and Se spin–orbit coupling play a key role in the band structure. • Substituted Bi/Sb and Te/Se have a limited impact on the transport coefficients. • n-Type doping will be preferred for quaternary (Bi,Sb){sub 2}(Te,Se){sub 3} compound. -- Abstract: The quaternary (Bi,Sb){sub 2}(Te,Se){sub 3} compounds are investigated using first-principles study and Boltzmann transport theory. The energy band structure and density of states are studied in detail. The electronic transport coefficients are then calculated as a function of chemical potential. The figure of merit ZT is obtained assuming a constant relaxation time and an averaged thermal conductivity. Our theoretical result agrees well with previous experimental data.

Ferroelectric and magnetic properties in high-pressure synthesized BiFeO3 compound

International Nuclear Information System (INIS)

Zhai, L.; Shi, Y.G.; Gao, J.L.; Tang, S.L.; Du, Y.W.

2011-01-01

Highlights: → A high-density polycrystalline BiFeO 3 compound was synthesized by high-pressure annealing method. → The sample showed weak ferromagnetic at room temperature, which could be attributed to the lattice distortion induced by the high-pressure annealing. → Irregular domains were observed on the surface of the sample by piezoresponse force microscopy, and a typical hysteresis loop was obtained. - Abstract: High-density polycrystalline BiFeO 3 compound was synthesized by high-pressure annealing. Measurements of crystal structure, magnetic, and ferroelectric properties were made on the sample. It was found that the sample was almost single phase with a distorted R3c structure. The results of the X-ray photoelectron spectra demonstrate that the oxidation state of Fe in the sample is Fe 3+ . The room-temperature field dependence of magnetization for BiFeO 3 exhibits a hysteretic behavior. The observed weak ferromagnetism could be ascribed to the lattice distortion induced by the high-pressure annealing. In addition, the local ferroelectric performance of the sample was studied by piezoresponse force microscopy.

Refractive index modulation in LiNbO3: MgO slab through Lamb wave

Science.gov (United States)

Prakash, Suraj; Sharma, Gaurav; Yadav, Gulab Chand; Singh, Vivek

2018-05-01

Present theoretical analysis deals with inducing refractive index contrast in Y-Z LiNbO3:MgO plate via GHz Lamb wave perturbation for photonic applications. Dispersion curves for Lamb wave in plate are plotted by employing displacement potential technique. Selecting wave parameters from dispersion curve, fundamental symmetric Lamb mode (S0) is excited in slab for 6GHz frequency. Produced displacement field by propagating S0 mode and thus developed strain is estimated to calculate refractive index modulation by applying photo-elastic relations. Modulated refractive index is of sinusoidal nature with period of modulation dependence on Lamb's wavelength. This plate having periodically modulated refractive index can be used as photonic crystal for different applications with acoustically tunable photonic band gap.

Synthesis of novel 3-cyclohexylpropanoic acid-derived nitrogen heterocyclic compounds and their evaluation for tuberculostatic activity.

Science.gov (United States)

Gobis, Katarzyna; Foks, Henryk; Bojanowski, Krzysztof; Augustynowicz-Kopeć, Ewa; Napiórkowska, Agnieszka

2012-01-01

A series of novel 3-cyclohexylpropanoic acid derivatives and 3-cyclohexylpropanoic acid-derived nitrogen heterocyclic compounds (1-8) have been synthesized and evaluated for tuberculostatic activity. Compounds 1a, 1c, 1e and 1f bearing benzimidazole or benzimidazole-like systems showed the most potent tuberculostatic activity against Mycobacterium tuberculosis strains with MIC values ranging from 1.5 to 12.5μg/mL. More importantly 1a (6-chloro-2-(2-cyclohexylethyl)-4-nitro-1H-benzo[d]imidazole) and 1f (2-(2-cyclohexylethyl)-1H-imidazo[4,5-b]phenazine) appeared selective for M. tuberculosis as compared with eukaryotic cells (human fibroblasts), and other antimicrobial strains. These compounds may thus represent a novel, selective class of antitubercular agents. Additionally compound 1a stimulated type I collagen output by fibroblasts, in vitro. Copyright © 2011 Elsevier Ltd. All rights reserved.

Magnetic properties of Sm2Co17-xCrx (0 ≤ x ≤ 3.0) compounds

International Nuclear Information System (INIS)

Fuquan, B.; Wang, J.L.; Tegus, O.; Dagula, W.; Tang, N.; Wang, W.Q.; Yang, F.M.; Brueck, E.; Boer, F.R. de; Buschow, K.H.J.

2004-01-01

The structural and magnetic properties of Sm 2 Co 17-x Cr x (0≤x≤3.0) compounds have been investigated by means of X-ray diffraction and magnetization measurements. The powder X-ray diffraction patterns show that all samples crystallize as a single phase with the rhombohedral Th 2 Zn 17 -type structure. The lattice parameters a and V increase monotonically with increasing Cr content, but the lattice parameter c increases very slowly with increasing Cr content. The X-ray diffraction patterns of the aligned powder of the samples have confirmed that all the compounds investigated have uniaxial anisotropy. The Curie temperature of the compounds decreases rapidly the spontaneous magnetization M 0 , the anisotropy field B a , and the anisotropy constant K 1 of Sm 2 Co 17-x Cr x (0≤x≤3.0) compounds decrease strongly with increasing Cr content

The effect of acute hypoxia on short-circuit current and epithelial resistivity in biopsies from human colon.

Science.gov (United States)

Carra, Graciela E; Ibáñez, Jorge E; Saraví, Fernando D

2013-09-01

In isolated colonic mucosa, decreases in short-circuit current (ISC) and transepithelial resistivity (RTE) occur when hypoxia is either induced at both sides or only at the serosal side of the epithelium. We assessed in human colon biopsies the sensitivity to serosal-only hypoxia and mucosal-only hypoxia and whether Na, K-ATPase blockade with ouabain interacts with hypoxia. Biopsy material from patients undergoing colonoscopy was mounted in an Ussing chamber for small samples (1-mm2 window). In a series of experiments we assessed viability and the electrical response to the mucolytic, dithiothreitol (1 mmol/l). In a second series, we explored the effect of hypoxia without and with ouabain. In a third series, we evaluated the response to a cycle of hypoxia and reoxygenation induced at the serosal or mucosal side while keeping the oxygenation of the opposite side. 1st series: Dithiothreitol significantly decreased the unstirred layer and ISC but increased RTE. 2nd series: Both hypoxia and ouabain decreased ISC, but ouabain increased RTE and this effect on RTE prevailed even during hypoxia. 3rd series: Mucosal hypoxia caused lesser decreases of ISC and RTE than serosal hypoxia; in the former, but not in the latter, recovery was complete upon reoxygenation. In mucolytic concentration, dithiothreitol modifies ISC and RTE. Oxygen supply from the serosal side is more important to sustain ISC and RTE in biopsy samples. The different effect of hypoxia and Na, K-ATPase blockade on RTE suggests that their depressing effect on ISC involves different mechanisms.

Spin wave spectrum and zero spin fluctuation of antiferromagnetic solid 3He

International Nuclear Information System (INIS)

Roger, M.; Delrieu, J.M.

1981-08-01

The spin wave spectrum and eigenvectors of the uudd antiferromagnetic phase of solid 3 He are calculated; an optical mode is predicted around 150 - 180 Mc and a zero point spin deviation of 0.74 is obtained in agreement with the antiferromagnetic resonance frequency measured by Osheroff

Analysis of Waves

DEFF Research Database (Denmark)

Frigaard, Peter; Andersen, Thomas Lykke

The present book describes the most important aspects of wave analysis techniques applied to physical model tests. Moreover, the book serves as technical documentation for the wave analysis software WaveLab 3, cf. Aalborg University (2012). In that respect it should be mentioned that supplementary...... to the present technical documentation exists also the online help document describing the WaveLab software in detail including all the inputs and output fields. In addition to the two main authors also Tue Hald, Jacob Helm-Petersen and Morten Møller Jakobsen have contributed to the note. Their input is highly...... acknowledged. The outline of the book is as follows: • Chapter 2 and 3 describes analysis of waves in time and frequency domain. • Chapter 4 and 5 describes the separation of incident and reflected waves for the two-dimensional case. • Chapter 6 describes the estimation of the directional spectra which also...

Skeletonized wave equation of surface wave dispersion inversion

KAUST Repository

Li, Jing

2016-09-06

We present the theory for wave equation inversion of dispersion curves, where the misfit function is the sum of the squared differences between the wavenumbers along the predicted and observed dispersion curves. Similar to wave-equation travel-time inversion, the complicated surface-wave arrivals in traces are skeletonized as simpler data, namely the picked dispersion curves in the (kx,ω) domain. Solutions to the elastic wave equation and an iterative optimization method are then used to invert these curves for 2D or 3D velocity models. This procedure, denoted as wave equation dispersion inversion (WD), does not require the assumption of a layered model and is less prone to the cycle skipping problems of full waveform inversion (FWI). The synthetic and field data examples demonstrate that WD can accurately reconstruct the S-wave velocity distribution in laterally heterogeneous media.

Fe3O4–graphene hybrids: nanoscale characterization and their enhanced electromagnetic wave absorption in gigahertz range

International Nuclear Information System (INIS)

Li Xinghua; Yi Haibo; Zhang Junwei; Feng Juan; Li Fashen; Xue Desheng; Zhang Haoli; Peng Yong; Mellors, Nigel J.

2013-01-01

Fe 3 O 4 –graphene hybrid materials have been fabricated by a simple polyol method, and their morphology, chemistry and crystal structure have been characterized at the nanoscale. It is found that each Fe 3 O 4 nanoparticles decorated on the graphene has a polycrystalline fcc spinel structure and a uniform chemical phase. Raman spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry/differential thermal analysis, X-ray diffraction, and transmission electron microscopy suggest that Fe 3 O 4 nanoparticles are chemically bonded to the graphene sheets. Electromagnetic wave absorption shows that the material has a reflection loss exceeding −10 dB in 7.5–18 GHz for an absorber thickness of 1.48–3 mm, accompanying a maximum reflection loss value of −30.1 dB at a 1.48-mm matching thickness and 17.2-GHz matching frequency. Theoretic analysis shows that the electromagnetic wave absorption behavior obeys quarter-wave principles. The results suggest that the magnetic Fe 3 O 4 –graphene hybrids are good candidates for the use as a light-weight electromagnetic wave-absorbing material in X- and K u -bands.

Analysis of hydrogen, carbon, sulfur and volatile compounds in (U3Si2 - Al) nuclear fuel

International Nuclear Information System (INIS)

Moura, Sergio C.; Redigolo, Marcelo M.; Amaral, Priscila O.; Leao, Claudio; Oliveira, Glaucia A.C. de; Bustillos, Oscar V.

2015-01-01

Uranium silicide U 3 Si 2 is used as nuclear fuel in the research nuclear reactor IEA-R1 at IPEN/CNEN, Sao Paulo, Brazil. The U 3 Si 2 is dispersed in aluminum reaching high densities of uranium in the nucleus of the fuel, up to 4.8 gU cm -3 . This nuclear fuel must comply with a quality control, which includes analysis of hydrogen, carbon and sulfur for the U 3 Si 2 and volatile compound for the aluminum. Hydrogen, carbon and sulfur are analyzed by the method of Radio Frequency gas extraction combustion coupled with Infrared detector. Volatile compounds are analyzed by the method of heated gas extraction coupled with gravimetric measurement. These methods are recommended by the American Society for Testing Materials (ASTM) for nuclear materials. The average carbon and sulfur measurements are 30 μg g -1 and 3 μg g -1 , respectively, and 40 μg g -1 for volatile compounds. The hydrogen analyzer is a TCHEN 600 LECO, carbon and sulfur analyzer is a CS 244 LECO and the volatile compounds analyzer is a home-made apparatus that use a resistant furnace, a gas pipe measurement and a glove-box with controlled atmosphere where an analytical balance has been installed, this analyzer was made at IPEN laboratory. (author)

X-Ray Absorption Near-Edge Structure (XANES) of Calcium L3,2 Edges of Various Calcium Compounds and X-Ray Excited Optical Luminescence (XEOL) Studies of Luminescent Calcium Compounds

International Nuclear Information System (INIS)

Ko, J. Y. Peter; Zhou Xingtai; Sham, T.-K.; Heigl, Franziskus; Regier, Tom; Blyth, Robert

2007-01-01

X-ray absorption at calcium L3,2 edges of various calcium compounds were measured using a high resolution Spherical Grating Monochromator (SGM) at the Canadian Light Source (CLS). We observe that each compound has its unique fine structure of L3,2 edges. This uniqueness is due to differences in local structure of compounds. We also performed (X-ray Excited Optical Luminescence) XEOL of selected luminescent calcium compounds to investigate their optical properties. XEOL is a photon-in-photon-out technique in which the optical luminescence that is excited by tunable x-rays from a synchrotron light source is monitored. Depending on excitation energy of the x-ray, relative intensities of luminescence peaks vary. Recent findings of the results will be presented here

Vacuum energy referred Ti3+/4+ donor/acceptor states in insulating and semiconducting inorganic compounds

International Nuclear Information System (INIS)

Rogers, E.G.; Dorenbos, P.

2014-01-01

Optical spectroscopy data has been collected on the energy needed for electron transfer from the valence band to Ti 4+ in about 40 different insulating and II–VI and III–V semiconducting compounds. It provides a measure for the location of the Ti 3+ 3d 1 ground state level above the valence band. This is combined with the vacuum referred binding energy (VRBE) of valence band electrons as obtained with the chemical shift model based on lanthanide impurity spectroscopy. It provides the VRBE of an electron in the Ti 3+ ground state level. This work will first show that the energy of electron transfer to Ti 4+ is about the same as that to Eu 3+ irrespective of the type of compound. Next it will be shown that the VRBE of the Ti 3+ 3d 1 ground state is always near −4 eV. An approximately ±1 eV spread around that value is attributed to the crystal field splitting of the Ti 3+ 3d-levels. - Highlights: • Data on the energy of charge transfer (CT) to Ti 4+ in 38 compounds was collected. • A correlation between the Ti 4+ and Eu 3+ CT energies has been established. • The chemical shift model has been applied to Ti impurity states. • The Ti 3+ ground state binding energy is always around −4±1 eV

LINEs Contribute to the Origins of Middle Bodies of SINEs besides 3′ Tails

Science.gov (United States)

2018-01-01

Abstract Short interspersed elements (SINEs), which are nonautonomous transposable elements, require the transposition machinery of long interspersed elements (LINEs) to mobilize. SINEs are composed of two or more independently originating parts. The 5′ region is called the “head” and is derived mainly from small RNAs, and the 3′ region (“tail”) originates from the 3′ region of LINEs and is responsible for being recognized by counterpart LINE proteins. The origin of the middle “body” of SINEs is enigmatic, although significant sequence similarities among SINEs from very diverse species have been observed. Here, a systematic analysis of the similarities among SINEs and LINEs deposited on Repbase, a comprehensive database of eukaryotic repeat sequences was performed. Three primary findings are described: 1) The 5′ regions of only two clades of LINEs, RTE and Vingi, were revealed to have contributed to the middle parts of SINEs; 2) The linkage of the 5′ and 3′ parts of LINEs can be lost due to occasional tail exchange of SINEs; and 3) The previously proposed Ceph-domain was revealed to be a fusion of a CORE-domain and a 5′ part of RTE clade of LINE. Based on these findings, a hypothesis that the 5′ parts of bipartite nonautonomous LINEs, which possess only the 5′ and 3′ regions of the original LINEs, can contribute to the undefined middle part of SINEs is proposed. PMID:29325122

Correlated electron capture and inner-shell excitation measurements in ion-atom collisions

International Nuclear Information System (INIS)

Tanis, J.A.; Bernstein, E.M.; Clark, M.W.

1985-01-01

In an ion-atom collision projectile excitation and charge transfer (electron capture) may occur together in a single encounter. If the excitation and capture are correlated, then the process is called resonant transfer and excitation (RTE); if they are uncorrelated, then the process is termed nonresonant transfer and excitation (NTE). Experimental work to date has shown the existence of RTE and provided strong evidence for NTE. Results presented here provide information on the relative magnitudes of RTE and NTE, the charge state dependence of RTE, the effect of the target momentum distribution on RTE, the magnitude of L-shell RTE compared to K-shell RTE, and the target Z dependences of RTE and NTE. 15 refs., 5 figs

Three-dimensional freak waves and higher-order wave-wave resonances

Science.gov (United States)

Badulin, S. I.; Ivonin, D. V.; Dulov, V. A.

2012-04-01

Quite often the freak wave phenomenon is associated with the mechanism of modulational (Benjamin-Feir) instability resulted from resonances of four waves with close directions and scales. This weakly nonlinear model reflects some important features of the phenomenon and is discussing in a great number of studies as initial stage of evolution of essentially nonlinear water waves. Higher-order wave-wave resonances attract incomparably less attention. More complicated mathematics and physics explain this disregard partially only. The true reason is a lack of adequate experimental background for the study of essentially three-dimensional water wave dynamics. We start our study with the classic example of New Year Wave. Two extreme events: the famous wave 26.5 meters and one of smaller 18.5 meters height (formally, not freak) of the same record, are shown to have pronounced features of essentially three-dimensional five-wave resonant interactions. The quasi-spectra approach is used for the data analysis in order to resolve adequately frequencies near the spectral peak fp ≈ 0.057Hz and, thus, to analyze possible modulations of the dominant wave component. In terms of the quasi-spectra the above two anomalous waves show co-existence of the peak harmonic and one at frequency f5w = 3/2fp that corresponds to maximum of five-wave instability of weakly nonlinear waves. No pronounced marks of usually discussed Benjamin-Feir instability are found in the record that is easy to explain: the spectral peak frequency fp corresponds to the non-dimensional depth parameter kD ≈ 0.92 (k - wavenumber, D ≈ 70 meters - depth at the Statoil platform Draupner site) that is well below the shallow water limit of the instability kD = 1.36. A unique data collection of wave records of the Marine Hydrophysical Institute in the Katsiveli platform (Black Sea) has been analyzed in view of the above findings of possible impact of the five-wave instability on freak wave occurrence. The data cover

Structure and Hyperfine Interactions in Aurivillius Bi9Ti3Fe5O27 Conventionally Sintered Compound

International Nuclear Information System (INIS)

Mazurek, M.; Lisinska-Czekaj, A.; Surowiec, Z.; Jartych, E.; Czekaj, D.

2011-01-01

The structure and hyperfine interactions in the Bi 9 Ti 3 Fe 5 O 27 Aurivillius compound were studied using X-ray diffraction and Moessbauer spectroscopy. Samples were prepared by the conventional solid-state sintering method at various temperatures. An X-ray diffraction analysis proved that the sintered compounds formed single phases at temperature above 993 K. Moessbauer measurements have been carried out at room and liquid nitrogen temperatures. Room-temperature Moessbauer spectrum of the Bi 9 Ti 3 Fe 5 O 27 compound confirmed its paramagnetic properties. However, low temperature measurements revealed the additional paramagnetic phase besides the antiferromagnetic one. (authors)

New liquid crystals in the series of 1, 3, 5-triazine compounds ...

African Journals Online (AJOL)

The Series of compounds were prepared by nucleophilic addition of the primary amino nucleophile to 1,3,5-triazine electrophilic ring via alkyl spacers in presence of potassium carbonate as hydrochloride acceptor. Differencial scanning calorimetry (DSC), polarizing optical microscopy and x-ray diffraction confirmed Smectic ...

Studies of Gravity Waves Using Michelson Interferometer Measurements of OH (3-1 Bands

Directory of Open Access Journals (Sweden)

Young-In Won

2001-06-01

Full Text Available As part of a long-term program for polar upper atmospheric studies, temperatures and intensities of the OH (3-1 bands were derived from spectrometric observations of airglow emissions over King Sejong station (62.22o S, 301.25o E. These measurements were made with a Michelson interferometer to cover wavelength regions between 1000 nm and 2000 nm. A spectral analysis was performed to individual nights of data to acquire information on the waves in the upper mesosphere/lower thermosphere. It is assumed that the measured fluctuations in the intensity and temperature of the OH (3-1 airglow were caused by gravity waves propagating through the emission layer. Correlation of intensity and temperature variation revealed oscillations with periods ranging from 2 to 9 hours. We also calculated Krassovsky's parameter and compared with published values.

HYPER RECOMBINATION1 of the THO/TREX complex plays a role in controlling transcription of the REVERSION-TO-ETHYLENE SENSITIVITY1 gene in Arabidopsis.

Directory of Open Access Journals (Sweden)

Congyao Xu

2015-02-01

Full Text Available Arabidopsis REVERSION-TO-ETHYLENE SENSITIVITY1 (RTE1 represses ethylene hormone responses by promoting ethylene receptor ETHYLENE RESPONSE1 (ETR1 signaling, which negatively regulates ethylene responses. To investigate the regulation of RTE1, we performed a genetic screening for mutations that suppress ethylene insensitivity conferred by RTE1 overexpression in Arabidopsis. We isolated HYPER RECOMBINATION1 (HPR1, which is required for RTE1 overexpressor (RTE1ox ethylene insensitivity at the seedling but not adult stage. HPR1 is a component of the THO complex, which, with other proteins, forms the TRanscription EXport (TREX complex. In yeast, Drosophila, and humans, the THO/TREX complex is involved in transcription elongation and nucleocytoplasmic RNA export, but its role in plants is to be fully determined. We investigated how HPR1 is involved in RTE1ox ethylene insensitivity in Arabidopsis. The hpr1-5 mutation may affect nucleocytoplasmic mRNA export, as revealed by in vivo hybridization of fluorescein-labeled oligo(dT45 with unidentified mRNA in the nucleus. The hpr1-5 mutation reduced the total and nuclear RTE1 transcript levels to a similar extent, and RTE1 transcript reduction rate was not affected by hpr1-5 with cordycepin treatment, which prematurely terminates transcription. The defect in the THO-interacting TEX1 protein of TREX but not the mRNA export factor SAC3B also reduced the total and nuclear RTE1 levels. SERINE-ARGININE-RICH (SR proteins are involved mRNA splicing, and we found that SR protein SR33 co-localized with HPR1 in nuclear speckles, which agreed with the association of human TREX with the splicing machinery. We reveal a role for HPR1 in RTE1 expression during transcription elongation and less likely during export. Gene expression involved in ethylene signaling suppression was not reduced by the hpr1-5 mutation, which indicates selectivity of HPR1 for RTE1 expression affecting the consequent ethylene response. Thus

Explicit and exact nontraveling wave solutions of the (3+1)-dimensional potential Yu-Toda-Sasa-Fukuyama equation

Science.gov (United States)

Yuan, Na

2018-04-01

With the aid of the symbolic computation, we present an improved ( G ‧ / G ) -expansion method, which can be applied to seek more types of exact solutions for certain nonlinear evolution equations. In illustration, we choose the (3 + 1)-dimensional potential Yu-Toda-Sasa-Fukuyama equation to demonstrate the validity and advantages of the method. As a result, abundant explicit and exact nontraveling wave solutions are obtained including two solitary waves solutions, nontraveling wave solutions and dromion soliton solutions. Some particular localized excitations and the interactions between two solitary waves are researched. The method can be also applied to other nonlinear partial differential equations.

Terahertz wave reflective sensing and imaging

Science.gov (United States)

Zhong, Hua

Sensing and imaging technologies using terahertz (THz) radiation have found diverse applications as they approach maturity. Since the burgeoning of this technique in the 1990's, many THz sensing and imaging investigations have been designed and conducted in transmission geometry, which provides sufficient phase and amplitude contrast for the study of the spectral properties of targets in the THz domain. Driven by rising expectations that THz technology will be a potential candidate in the next generation of security screening, remote sensing, biomedical imaging and non-destructive testing (NDT), most THz sensing and imaging modalities are being extended to reflection geometry, which offers unique and adaptive solutions, and multi-dimensional information in many real scenarios. This thesis takes an application-focused approach to the advancement of THz wave reflective sensing and imaging systems: The absorption signature of the explosive material hexahydro-1,3,5-trinitro-1,3,5triazine (RDX) is measured at 30 m---the longest standoff distance so far attained by THz time-domain spectroscopy (THz-TDS). The standoff distance sensing ability of THz-TDS is investigated along with discussions specifying the influences of a variety of factors such as propagation distance, water vapor absorption and collection efficiency. Highly directional THz radiation from four-wave mixing in laser-induced air plasmas is first observed and measured, which provides a potential solution for the atmospheric absorption effect in standoff THz sensing. The simulations of the beam profiles also illuminate the underlying physics behind the interaction of the optical beam with the plasma. THz wave reflective spectroscopic focal-plane imaging is realized the first time. Absorption features of some explosives and related compounds (ERCs) and biochemical materials are identified by using adaptive feature extraction method. Good classification results using multiple pattern recognition methods are

Mutual transformation of light waves by reflection holograms in photorefractive crystals of the 4-bar 3m symmetry

Energy Technology Data Exchange (ETDEWEB)

Naunyka, V. N.; Shepelevich, V. V., E-mail: vasshep@inbox.ru [Mozyr State Pedagogical University (Belarus)

2011-05-15

The mutual transformation of light waves in the case of their simultaneous diffraction from a bulk reflection phase hologram, which was formed in a cubic photorefractive crystal of the 4-bar 3m symmetry class, has been studied. The indicator surfaces of the polarization-optimized values of the relative intensity of the object wave, which make it possible to determine the amplification of this wave for any crystal cut, are constructed. The linear polarization azimuths at which the energy exchange between the light waves reaches a maximum are found numerically for crystals of different cuts.

The Wave Dragon

DEFF Research Database (Denmark)

Sørensen, H. C.; Hansen, R.; Friis-Madsen, E.

2000-01-01

The Wave Dragon is an offshore wave energy converter of the overtopping type, utilizing a patented wave reflector design to focus the waves towards a ramp, and the overtopping is used for electricity production through a set of Kaplan/propeller hydro turbines. During the last 2 years, excessive...... design an testing has been performed on a scale 1:50 model of the Wave Dragon, and on a scale 1:3:5 model turbine. Thus survivability, overtopping, hydraulic response, turbine performance and feasibility have been verified....

Development of Scientific Simulation 3D Full Wave ICRF Code for Stellarators and Heating/CD Scenarios Development

Energy Technology Data Exchange (ETDEWEB)

Vdovin V.L.

2005-08-15

In this report we describe theory and 3D full wave code description for the wave excitation, propagation and absorption in 3-dimensional (3D) stellarator equilibrium high beta plasma in ion cyclotron frequency range (ICRF). This theory forms a basis for a 3D code creation, urgently needed for the ICRF heating scenarios development for the operated LHD, constructed W7-X, NCSX and projected CSX3 stellarators, as well for re evaluation of ICRF scenarios in operated tokamaks and in the ITER . The theory solves the 3D Maxwell-Vlasov antenna-plasma-conducting shell boundary value problem in the non-orthogonal flux coordinates ({Psi}, {theta}, {var_phi}), {Psi} being magnetic flux function, {theta} and {var_phi} being the poloidal and toroidal angles, respectively. All basic physics, like wave refraction, reflection and diffraction are self consistently included, along with the fundamental ion and ion minority cyclotron resonances, two ion hybrid resonance, electron Landau and TTMP absorption. Antenna reactive impedance and loading resistance are also calculated and urgently needed for an antenna -generator matching. This is accomplished in a real confining magnetic field being varying in a plasma major radius direction, in toroidal and poloidal directions, through making use of the hot dense plasma wave induced currents with account to the finite Larmor radius effects. We expand the solution in Fourier series over the toroidal ({var_phi}) and poloidal ({theta}) angles and solve resulting ordinary differential equations in a radial like {Psi}-coordinate by finite difference method. The constructed discretization scheme is divergent-free one, thus retaining the basic properties of original equations. The Fourier expansion over the angle coordinates has given to us the possibility to correctly construct the ''parallel'' wave number k{sub //}, and thereby to correctly describe the ICRF waves absorption by a hot plasma. The toroidal harmonics are tightly

The Vajont disaster: a 3D numerical simulation for the slide and the waves

Science.gov (United States)

Rubino, Angelo; Androsov, Alexey; Vacondio, Renato; Zanchettin, Davide; Voltzinger, Naum

2016-04-01

A very high resolution O(5 m), 3D hydrostatic nonlinear numerical model was used to simulate the dynamics of both the slide and the surface waves produced during the Vajont disaster (north Italy, 1963), one of the major landslide-induced tsunamis ever documented. Different simulated wave phenomena like, e.g., maximum run-up on the opposite shore, maximum height, and water velocity were analyzed and compared with data available in literature, including the results of a fully 3D simulation obtained with a Smoothed Particle Hydrodynamic code. The difference between measured and simulated after-slide bathymetries was calculated and used in an attempt to quantify the relative magnitude and extension of rigid and fluid motion components during the event.

Preparation, characterization, and thermal stability of B2O3-ZrO2

Directory of Open Access Journals (Sweden)

Theresia Debora Simbolon

2017-04-01

Full Text Available Synthesis of the borate-based compound with ZrOCl2 to form B2O3-ZrO2 has been conducted. The compound was characterized by FT-IR spectrophotometer, X-ray diffraction, acidity and thermal stability test. The results showed that the FT-IR main vibration spectrum of B2O3-ZrO2 compound has appeared at wave number 401.2 cm-1 for Zr-O bonding vibration, 617.2 cm-1 for B-O-B bonding vibration and 910.4 cm-1 for B-O bonding vibration. The XRD diffraction pattern shows B2O3-ZrO2 compound has an amorphous structure. The FT-IR spectrum after saturated with ammonia and potentiometric titration indicates that the compound of B2O3-ZrO2 has acidic properties with a strong level of acidity. Thermal stability test shows that the B2O3-ZrO2 compounds have high stability on temperature with increasing crystallinity after the compound was heated at 700 °C. Keywords: B2O3-ZrO2, impregnation, thermal stability.

Spin reorientation and magnetic anisotropy in Y2Co17-xCr x (x 1.17-3.0) compounds

International Nuclear Information System (INIS)

Fuquan, B.; Tegus, O.; Dagula, W.; Brueck, E.; Boer, F.R. de; Buschow, K.H.J.

2005-01-01

Spin reorientation transitions and magnetic anisotropy in Y 2 Co 17-x Cr x (x = 1.17-3.0) compounds have been investigated by means of X-ray diffraction and magnetization measurements. The powder X-ray diffraction patterns show that most samples crystallize as a single phase with the rhombohedral Th 2 Zn 17 -type structure. However, in the compound Y 2 Co 14 Cr 3 the Th 2 Zn 17 phase coexist with the hexagonal Th 2 Ni 17 -type phase. The lattice parameters a and c hardly change and the unit cell volume V increases slightly with increasing Cr content. The X-ray diffraction patterns of the aligned powder of the samples have confirmed that at room temperature the compound with x = 1.17 has planar anisotropy, but the compounds with x = 1.76, 2.34 and 3.00 have uniaxial anisotropy. Spin reorientation phenomena occur in all of the compounds. With increasing Cr content, the Curie temperature, the spin reorientation temperature, the spontaneous magnetization, and the anisotropy constant K 2 of the Y 2 Co 17-x Cr x (x = 1.17-3.0) compounds decrease strongly while the anisotropy constant K 1 increases in the range of x from 1.17 to 2.34 and then decreases in the range of x from 2.34 to 3.00

78 FR 62451 - Air Quality: Revision to Definition of Volatile Organic Compounds-Exclusion of 2,3,3,3...

Science.gov (United States)

2013-10-22

... Alternatives Policy (SNAP) program (CAA Sec. 612; 40 CFR 82 subpart G). The SNAP program has issued a final... incentive for industry to use negligibly reactive compounds in place of more highly reactive compounds that are regulated as VOCs. The EPA lists compounds that it has determined to be negligibly reactive in its...

Dispersion of acoustic surface waves by velocity gradients

Science.gov (United States)

Kwon, S. D.; Kim, H. C.

1987-10-01

The perturbation theory of Auld [Acoustic Fields and Waves in Solids (Wiley, New York, 1973), Vol. II, p. 294], which describes the effect of a subsurface gradient on the velocity dispersion of surface waves, has been modified to a simpler form by an approximation using a newly defined velocity gradient for the case of isotropic materials. The modified theory is applied to nitrogen implantation in AISI 4140 steel with a velocity gradient of Gaussian profile, and compared with dispersion data obtained by the ultrasonic right-angle technique in the frequency range from 2.4 to 14.8 MHz. The good agreement between experiments and our theory suggests that the compound layer in the subsurface region plays a dominant role in causing the dispersion of acoustic surface waves.

Comprehensive and Facile Synthesis of Some Functionalized Bis-Heterocyclic Compounds Containing a Thieno[2,3-b]thiophene Motif