WorldWideScience

Sample records for watts bar reservoir

  1. Remedial investigation/feasibility study report for Lower Watts Bar Reservoir Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This document is the combined Remedial Investigation and Feasibility Study Report for the lower Watts Bar Reservoir (LWBR) Operable Unit (OU). The LWBR is located in Roane, Rhea, and Meigs counties, Tennessee, and consists of Watts Bar Reservoir downstream of the Clinch river. This area has received hazardous substances released over a period of 50 years from the US Department of Energy`s Oak Ridge Reservation (ORR), a National Priority List site established under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). As required by this law, the ORR and all off-site areas that have received contaminants, including LWBR, must be investigated to determine the risk to human health and the environment resulting from these releases, the need for any remedial action to reduce these risks, and the remedial actions that are most feasible for implementation in this OU. Contaminants from the ORR are primarily transported to the LWBR via the Clinch River. There is little data regarding the quantities of most contaminants potentially released from the ORR to the Clinch River, particularly for the early years of ORR operations. Estimates of the quantities released during this period are available for most radionuclides and some inorganic contaminants, indicating that releases 30 to 50 years ago were much higher than today. Since the early 1970s, the release of potential contaminants has been monitored for compliance with environmental law and reported in the annual environmental monitoring reports for the ORR.

  2. Effects of coal fly ash on tree swallow reproduction in Watts Bar Reservoir, Tennessee.

    Science.gov (United States)

    Walls, Suzanne J; Meyer, Carolyn B; Iannuzzi, Jacqueline; Schlekat, Tamar H

    2015-01-01

    Coal-fly ash was released in unprecedented amounts (4.1 × 10(6) m(3) ) into the Emory River from the Tennessee Valley Authority Kingston Fossil Plant on Watts Bar Reservoir in Tennessee. Tree swallows were exposed to ash-related constituents at the ash release via their diet of emergent aquatic insects, whose larval forms can accumulate constituents from submerged river sediments. Reproduction of tree swallow colonies was assessed over a 2-year period by evaluating whether 1) ash constituent concentrations were elevated in egg, eggshell, and nestling tissues at colonies near ash-impacted river reaches compared to reference colonies, 2) production of fledglings per nesting female was significantly lower in ash-impacted colonies versus reference colonies, and 3) ash constituent concentrations or diet concentrations were correlated with nest productivity measures (clutch size, hatching success, and nestling survival, and fledglings produced per nest). Of the 26 ash constituents evaluated, 4 (Se, Sr, Cu, and Hg) were significantly elevated in tissues potentially from the ash, and 3 (Se, Sr, and Cu) in tissues or in swallow diet items were weakly correlated to at least one nest-productivity measure or egg weight. Tree swallow hatching success was significantly reduced by 12%, but fledgling production per nest was unaffected due to larger clutch sizes in the impacted than reference colonies. Bioconcentration from the ash to insects in the diet to tree swallow eggs appears to be low. Overall, adverse impacts of the ash on tree swallow reproduction were not observed, but monitoring is continuing to further ensure Se from the residual ash does not adversely affect tree swallow reproduction over time. Integr Environ Assess Manag 2015;11:56-66. © 2014 SETAC.

  3. PCB studies on fish from Watts Bar, Fort Loudoun, Tellico, and Melton Hill Reservoirs, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Dycus, D.L.

    1990-09-01

    The Tennessee Valley Authority (TVA) reservoirs that are the subject of this report have been under investigation for several years due to contamination with polychlorinated biphenyls (PCBs). The study has two primary objectives: (1) define the geographical boundaries where contamination in fish ceases to be a problem and (2) determine the trend in PCB loading in fish from reservoirs where the contamination has been well defined. The purpose of this document is to briefly describe results of PCB analysis of fish collected from these reservoirs in autumn 1988 and compare them to results for previous years. These results were shared with all members on the study team as soon as they were received from the analytical laboratory rather than waiting for this formal report. Therefore, decisions on updating existing advisories and selection of study design for autumn 1989 were made months before this document was prepared. 6 refs., 21 tabs.

  4. ORNL Trusted Corridors Project: Watts Bar Dam Inland Waterway Project

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Randy M [ORNL; Gross, Ian G [ORNL; Smith, Cyrus M [ORNL; Hill, David E [ORNL

    2011-11-01

    Radiation has existed everywhere in the environment since the Earth's formation - in rocks, soil, water, and plants. The mining and processing of naturally occurring radioactive materials for use in medicine, power generation, consumer products, and industry inevitably generate emissions and waste. Radiological measuring devices have been used by industry for years to measure for radiation in undesired locations or simply identify radioactive materials. Since the terrorist attacks on the United States on 9-11-01 these radiation measuring devices have proliferated in many places in our nation's commerce system. DOE, TVA, the Army Corps and ORNL collaborated to test the usefulness of these devices in our nation's waterway system on this project. The purpose of the Watts Bar Dam ORNL Trusted Corridors project was to investigate the security, safety and enforcement needs of local, state and federal government entities for state-of-the-art sensor monitoring in regards to illegal cargo including utilization of the existing infrastructure. TVA's inland waterways lock system is a recognized and accepted infrastructure by the commercial carrier industry. Safety Monitoring activities included tow boat operators, commercial barges and vessels, recreational watercraft and their cargo, identification of unsafe vessels and carriers, and, monitoring of domestic and foreign commercial vessels and cargo identification. Safety Enforcement activities included cargo safety, tracking, identification of hazardous materials, waterway safety regulations, and hazardous materials regulations. Homeland Security and Law Enforcement Applications included Radiological Dispersive Devices (RDD) identification, identification of unsafe or illicit transport of hazardous materials including chemicals and radiological materials, and screening for shipments of illicit drugs. In the Fall of 2005 the SensorNet funding for the project expired. After several unsuccessful attempts to

  5. Watts Bar Unit 2 Startup Results with VERA

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, Andrew T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Collins, Benjamin S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gentry, Cole A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stimpson, Shane G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ritchie, John A. [Tennessee Valley Authority (TVA), Knoxville, TN (United States)

    2017-03-01

    CASL members TVA, Westinghouse, and Oak Ridge National Laboratory have successfully completed a detailed simulation of the initial startup of Watts Bar Nuclear Unit 2 (WBN2) using the advanced reactor simulation tools known as VERA. WBN2 is the first commercial power reactor to join the nation’s electrical grid in over two decades, and the modern core design and availability of data make it an excellent benchmark for CASL. Calculations were performed three months prior to the startup, and in the first blind application of VERA to a new reactor, predicted criticality and physics parameters very close to those later measured by TVA. Subsequent calculations with the latest version of VERA and using exact measurement conditions improved the results even further.

  6. 78 FR 53494 - Dam Safety Modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams

    Science.gov (United States)

    2013-08-29

    ... Dam Safety Modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams AGENCY: Tennessee... preferred alternative in its final environmental impact statement (EIS) for the dam safety modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams. The notice of availability (NOA) of the...

  7. 76 FR 34799 - Permanent Dam Safety Modification at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams, TN

    Science.gov (United States)

    2011-06-14

    ... Permanent Dam Safety Modification at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams, TN AGENCY... various alternatives for permanent modifications to the existing dam facilities at Cherokee, Fort Loudoun, Tellico, and Watts Bar dams in Tennessee. The level of review will be determined after the public...

  8. Optimization of Watt's Six-bar Linkage to Generate Straight and Parallel Leg Motion

    Directory of Open Access Journals (Sweden)

    Saeed Akbarnejad

    2008-11-01

    Full Text Available This paper considers optimal synthesis of a special type of four-bar linkages. Combination of this optimal four-bar linkage with on of it's cognates and elimination of two redundant cognates will result in a Watt's six-bar mechanism, which generates straight and parallel motion. This mechanism can be utilized for legged machines. The advantage of this mechanism is that the leg remains straight during it's contact period and because of it's parallel motion, the legs can be as wide as desired to increase contact area and decrease the number of legs required to keep body's stability statically and dynamically. "Genetic algorithm" optimization method is used to find optimal lengths. It is especially useful for problems like the coupler curve equation which are completely nonlinear or extremely difficult to solve.

  9. Acoustic emission monitoring of hot functional testing: Watts Bar Unit 1 Nuclear Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Hutton, P.H.; Dawson, J.F.; Friesel, M.A.; Harris, J.C.; Pappas, R.A.

    1984-06-01

    Acoustic emission (AE) monitoring of selected pressure boundary areas at TVA's Watts Bar, Unit 1 Nuclear Power Plant during hot functional preservice testing is described in this report. The report deals with background, methodology, and results. The work discussed here is a major milestone in a program supported by NRC to develop and demonstrate application of AE monitoring for continuous surveillance of reactor pressure boundaries to detect and evaluate growing flaws. The subject work demonstrated that anticipated problem areas can be overcome. Work is continuing toward AE monitoring during reactor operation.

  10. 76 FR 70169 - Draft Supplement 2 to Final Environmental Statement Related to the Operation of Watts Bar Nuclear...

    Science.gov (United States)

    2011-11-10

    ...The U.S. Nuclear Regulatory Commission (NRC) is requesting comments on NUREG-0498, ``Final Environmental Statement, Supplement 2, Related to the Operation of Watts Bar Nuclear Plant [WBN], Unit 2-- Draft Report for Comment'' (draft SFES). The NRC will hold a public meeting on the draft SFES on December 8,...

  11. Simulation of Watts Bar Unit 1 Initial Startup Tests with Continuous Energy Monte Carlo Methods

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, Andrew T [ORNL; Gehin, Jess C [ORNL; Bekar, Kursat B [ORNL; Celik, Cihangir [ORNL

    2014-01-01

    The Consortium for Advanced Simulation of Light Water Reactors* is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications. One component of the testing and validation plan for VERA is comparison of neutronics results to a set of continuous energy Monte Carlo solutions for a range of pressurized water reactor geometries using the SCALE component KENO-VI developed by Oak Ridge National Laboratory. Recent improvements in data, methods, and parallelism have enabled KENO, previously utilized predominately as a criticality safety code, to demonstrate excellent capability and performance for reactor physics applications. The highly detailed and rigorous KENO solutions provide a reliable nu-meric reference for VERAneutronics and also demonstrate the most accurate predictions achievable by modeling and simulations tools for comparison to operating plant data. This paper demonstrates the performance of KENO-VI for the Watts Bar Unit 1 Cycle 1 zero power physics tests, including reactor criticality, control rod worths, and isothermal temperature coefficients.

  12. Standalone BISON Fuel Performance Results for Watts Bar Unit 1, Cycles 1-3

    Energy Technology Data Exchange (ETDEWEB)

    Clarno, Kevin T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pawlowski, Roger [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stimpson, Shane [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Jeffrey [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-03-07

    The Consortium for Advanced Simulation of Light Water Reactors (CASL) is moving forward with more complex multiphysics simulations and increased focus on incorporating fuel performance analysis methods. The coupled neutronics/thermal-hydraulics capabilities within the Virtual Environment for Reactor Applications Core Simulator (VERA-CS) have become relatively stable, and major advances have been made in analysis efforts, including the simulation of twelve cycles of Watts Bar Nuclear Unit 1 (WBN1) operation. While this is a major achievement, the VERA-CS approaches for treating fuel pin heat transfer have well-known limitations that could be eliminated through better integration with the BISON fuel performance code. Several approaches are being implemented to consider fuel performance, including a more direct multiway coupling with Tiamat, as well as a more loosely coupled one-way approach with standalone BISON cases. Fuel performance typically undergoes an independent analysis using a standalone fuel performance code with manually specified input defined from an independent core simulator solution or set of assumptions. This report summarizes the improvements made since the initial milestone to execute BISON from VERA-CS output. Many of these improvements were prompted through tighter collaboration with the BISON development team at Idaho National Laboratory (INL). A brief description of WBN1 and some of the VERA-CS data used to simulate it are presented. Data from a small mesh sensitivity study are shown, which helps justify the mesh parameters used in this work. The multi-cycle results are presented, followed by the results for the first three cycles of WBN1 operation, particularly the parameters of interest to pellet-clad interaction (PCI) screening (fuel-clad gap closure, maximum centerline fuel temperature, maximum/minimum clad hoop stress, and cumulative damage index). Once the mechanics of this capability are functioning, future work will target cycles with

  13. Assessment of Pellet-Clad Interaction Indicators in Watts Bar Unit 1 using the VERA Framework

    Energy Technology Data Exchange (ETDEWEB)

    Stimpson, Shane G [ORNL; Powers, Jeffrey J [ORNL; Clarno, Kevin T [ORNL; Pawlowski, Roger [Sandia National Laboratory (SNL); Bratton, Ryan [Pennsylvania State University

    2015-01-01

    The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high-fidelity, multiphysics simulations of light water reactors (LWRs) by coupling a variety of codes within the Virtual Environment for Reactor Analysis (VERA). One of the primary goals of CASL is to predict local cladding failure through pellet-clad interaction (PCI). This capability is currently being pursued through several different approaches, such as with Tiamat, which is a simulation tool within VERA that more tightly couples the MPACT neutron transport solver, the CTF thermal hydraulics solver, and the MOOSE-based Bison-CASL fuel performance code. However, the process in this paper focuses on running fuel performance calculations with Bison-CASL to predict PCI using the multicycle output data from coupled neutron transport/thermal hydraulics simulations. In recent work within CASL, Watts Bar Unit 1 has been simulated over 12 cycles using the VERA core simulator capability based on MPACT and CTF. Using the output from these simulations, Bison-CASL results can be obtained without rerunning all 12 cycles, while providing some insight into PCI indicators. Multi-cycle Bison-CASL results are presented and compared against results from the FRAPCON fuel performance code. There are several quantities of interest in considering PCI and subsequent fuel rod failures, such as the clad hoop stress and maximum centerline fuel temperature, particularly as a function of time. Bison-CASL performs single-rod simulations using representative power and temperature distributions, providing high-resolution results for these and a number of other quantities. This will assist in identifying fuels rods as potential failure locations for use in further analyses.

  14. Preliminary systems-interaction results from the Digraph Matrix Analysis of the Watts Bar Nuclear Power Plant safety-injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Champney, J.M.; Alesso, H.P.

    1983-06-01

    This report provides preliminary results generated by a Digraph Matrix Analysis (DMA) for a Systems Interaction analysis performed on the Safety Injection System of the Tennessee Valley Authority Watts Bar Nuclear Power Plant. An overview of DMA is provided along with a brief description of the computer codes used in DMA.

  15. Preliminary systems-interaction results from the Digraph Matrix Analysis of the Watts Bar Nuclear Power Plant safety-injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Champney, J.M.; Alesso, H.P.

    1983-06-01

    This report provides preliminary results generated by a Digraph Matrix Analysis (DMA) for a Systems Interaction analysis performed on the Safety Injection System of the Tennessee Valley Authority Watts Bar Nuclear Power Plant. An overview of DMA is provided along with a brief description of the computer codes used in DMA.

  16. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 17

    Energy Technology Data Exchange (ETDEWEB)

    Tam, P.S.

    1995-10-01

    This report supplements the Safety Evaluation Report (SER), NUREG-0847 (June 1982), Supplement No. 1 (September 1982), Supplement No. 2 (January 1984), Supplement No. 3 (January 1985), Supplement No. 4 (March 1985), Supplement No. 5 (November 1990), Supplement No. 6 (April 1991), Supplement No. 7 (September 1991), 1991), Supplement No. 8 (January 1992), Supplement No. 9 (June 1992), Supplement No. 10 (October 1992), Supplement No. 11 (April.1993), Supplement No. 12 (October 1993), Supplement No. 13 (April 1994), Supplement No. 14 (December 1994), Supplement No. 15 (June 1995), and Supplement No. 16 (September 1995) issued by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission with respect to the application filed by the Tennessee Valley Authority, as applicant and owner, for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50--390 and 50--391). The facility is located in Rhea county, Tennessee, near the Watts Bar Dam on the Tennessee River. In this supplement, NRC examines the significant problems of construction quality and quality assurance effectiveness that led TVA to withdraw its certification in 1985 that Watts Bar Unit I was ready to load fuel. Also discussed are the extensive corrective actions performed by TVA according to its nuclear performance plans and other supplemental programs, and NRC`s extensive oversight to determine whether the Watts Bar Unit 1 construction quality and TVA`s operational readiness and quality assurance effectiveness are adequate for a low-power operating license to be issued. SSER 17 does not address Watts Bar Unit 2, except for the systems which are necessary to support Unit 1 operation.

  17. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 15

    Energy Technology Data Exchange (ETDEWEB)

    Tam, P.S.

    1995-06-01

    This report supplements the Safety Evaluation Report (SER), NUREG-0847 (June 1982), Supplement No. 1 (September 1982), Supplement No. 2 (January 1984), Supplement No. 3 (January 1985), Supplement No. 4 (March 1985), Supplement No. 5 (November 1990), Supplement No. 6 (April 1991), Supplement No. 7 (September 1991), Supplement No. 8 (January 1992), Supplement No. 9 (June 1992), Supplement No. 10 (October 1992), Supplement No. 11 (April 1993), Supplement No. 12 (October 1993), Supplement No. 13 (April 1994), and Supplement No. 14 (December 1994) issued by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission with respect to the application filed by the Tennessee Valley Authority, as applicant and owner, for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). The facility is located in Rhea County, Tennessee, near the Watts Bar Dam on the Tennessee River. This supplement provides recent information regarding resolution of some of the outstanding and confirmatory items, and proposed license conditions identified in the SER.

  18. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 18

    Energy Technology Data Exchange (ETDEWEB)

    Tam, P.S.

    1995-10-01

    In June 1982, the Nuclear Regulatory Commission staff (NRC staff or staff) issued a Safety Evaluation Report, NUREG-0847, regarding the application by the Tennessee Valley Authority (TVA or the applicant) for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2. Each of the following sections and appendices of this supplement is numbered the same as the section or appendix of the SER that is being updated, and the discussions are supplementary to, and not in lieu of, the discussion in the SER, unless otherwise noted. Accordingly, Appendix A continues the chronology of the safety review. Appendix E lists principal contributors to this supplement. Appendix FF is added in this supplement. The other appendices are not changed by this supplement.

  19. Technical evaluation report TMI action -- NUREG-0737 (II.D.1). Relief and safety valve testing, Watts Bar Nuclear Plant, Units 1 and 2 (Dockets 50-390 and 50-391)

    Energy Technology Data Exchange (ETDEWEB)

    Fineman, C.P.

    1995-02-01

    In the past, safety and relief valves installed in the primary coolant system of light water reactors have performed improperly. As a result, the authors of NUREG-0578 (TMI-2 Lessons Learned Task Force Status Report and Short-Term Recommendations) and, subsequently, NUREG-0737 (Clarification of TMI Action Plan Requirements) recommended development and completion of programs to do two things. First, they should reevaluate the functional performance capabilities of pressurized water reactor safety, relief, and block valves. Second, they should verify the integrity of the pressurizer safety and relief valve piping systems for normal, transient, and accident conditions. This report documents the review of those programs by Lockheed Idaho Technologies Company. Specifically, this report documents the review of the Watts Bar Nuclear Plant, Units 1 and 2, Applicant response to the requirements of NUREG-0578 and NUREG-0737. This review found the Applicant provided an acceptable response reconfirming they met General Design Criteria 14, 15, and 30 of Appendix A to 10 CFR 50 for the subject equipment. It should also be noted Lockheed Idaho performed this review for both Units 1 and 2. However, the applicability of this review to Unit 2 depends on verifying that the Unit 2 as-built system conforms to the Unit 1 design reviewed in this report.

  20. Characteristics and mechanism of low permeability beach-bar sandstone reservoir of Es4 in Dongying sag

    Institute of Scientific and Technical Information of China (English)

    WANG Hua-ai; ZHONG Jian-hua; ZHONG Fu-ping; NIU Yong-bin; WANG Pei-jun

    2009-01-01

    Core and cast sections observation and description, and logging, scanning electron microscope and core lab analysis data etc. Were applied to the present research of the characteristics and mechanism of low permeability beach-bar sandstone reservoir of Es4 in Dongying sag. The results indicated the reservoir has the characteristics of middle-low pores, low-permeability, low compo-sitional and structural maturity, and thin throat. The low-permeability is mainly due to sedimentation (fine particles and argillaceous inter beds) and diagenesis (compaction, cementation, and dissolution). The cementation reduced the physical property of the reser-voir mainly by carbonate cementation, quartz autogeny and enragement, and autogeny clay. Clay minerals usually jam the pores by filling holes, close-fitting the wall of hole, bridging, wrapping grains, and separate attaching the pores and so on. The dissolution is insufficient so as not to improve the porosity and permeability of the reservoir obviously. So it is also an important factor of form-ing low-permeability reservoir.

  1. Watt and joule balances

    Science.gov (United States)

    Robinson, Ian A.

    2014-04-01

    The time is fast approaching when the SI unit of mass will cease to be based on a single material artefact and will instead be based upon the defined value of a fundamental constant—the Planck constant—h . This change requires that techniques exist both to determine the appropriate value to be assigned to the constant, and to measure mass in terms of the redefined unit. It is important to ensure that these techniques are accurate and reliable to allow full advantage to be taken of the stability and universality provided by the new definition and to guarantee the continuity of the world's mass measurements, which can affect the measurement of many other quantities such as energy and force. Up to now, efforts to provide the basis for such a redefinition of the kilogram were mainly concerned with resolving the discrepancies between individual implementations of the two principal techniques: the x-ray crystal density (XRCD) method [1] and the watt and joule balance methods which are the subject of this special issue. The first three papers report results from the NRC and NIST watt balance groups and the NIM joule balance group. The result from the NRC (formerly the NPL Mk II) watt balance is the first to be reported with a relative standard uncertainty below 2 × 10-8 and the NIST result has a relative standard uncertainty below 5 × 10-8. Both results are shown in figure 1 along with some previous results; the result from the NIM group is not shown on the plot but has a relative uncertainty of 8.9 × 10-6 and is consistent with all the results shown. The Consultative Committee for Mass and Related Quantities (CCM) in its meeting in 2013 produced a resolution [2] which set out the requirements for the number, type and quality of results intended to support the redefinition of the kilogram and required that there should be agreement between them. These results from NRC, NIST and the IAC may be considered to meet these requirements and are likely to be widely debated

  2. Consolidation of geologic studies of geopressured-geothermal resources in Texas: Barrier-bar tidal-channel reservoir facies architecture, Jackson Group, Prado Field, South Texas

    Energy Technology Data Exchange (ETDEWEB)

    Seni, S.J.; Choh, S.J.

    1993-09-01

    Sandstone reservoirs in the Jackson barrier/strandplain play are characterized by low recovery efficiencies and thus contain a large hydrocarbon resource target potentially amenable to advanced recovery techniques. Prado field, Jim Hogg County, South Texas, has produced over 23 million bbl of oil and over 32 million mcf gas from combination structural-stratigraphic traps in the Eocene lower Jackson Group. Hydrocarbon entrapment at Prado field is a result of anticlinal nosing by differential compaction and updip pinch-out of barrier bar sandstone. Relative base-level lowering resulted in forced regression that established lower Jackson shoreline sandstones in a relatively distal location in central Jim Hogg County. Reservoir sand bodies at Prado field comprise complex assemblages of barrier-bar, tidal-inlet fill, back-barrier bar, and shoreface environments. Subsequent progradation built the barrier-bar system seaward 1 to 2 mi. With the barrier-bar system, favorable targets for hydrocarbon reexploration are concentrated in tidal-inlet facies because they possess the greatest degree of depositional heterogeneity.

  3. Makahiki+WattDepot

    DEFF Research Database (Denmark)

    Johnson, Philip M.; Xu, Yongwen; Brewer, Robert S.;

    2013-01-01

    Satisfying the radically different requirements and operating assumptions of the next generation smart grid requires new kinds of software that enable research and experimentation into the ways that electrical energy production and consumption can be collected, analyzed, visualized, and provided...... to consumers. Since 2009, we have been designing, implementing, and evaluating an open source software "stack" to facilitate this research. This software stack consists of two custom systems called WattDepot and Makahiki, along with the open source components they rely upon (Java, Restlet, Postgres, Python...

  4. Chickamauga Reservoir 1992 fisheries monitoring cove rotenone results

    Energy Technology Data Exchange (ETDEWEB)

    Kerley, B.L.

    1993-06-01

    The Tennessee Valley Authority (TVA) is required by the National Pollutant Discharge Elimination System (NPDES) Permit for Sequoyah Nuclear Plant (SQN) to conduct and report annually a nonradiological operational monitoring program to evaluate potential effects of SQN on Chickamauga Reservoir. This monitoring program was initially designed to identify potential changes in water quality and biological communities in Chickamauga Reservoir resulting from operation of SQU. Chickamauga Reservoir cove rotenone sampling has also been conducted as part of the preoperational monitoring program for Watts Bar Nuclear Plant (WBN) to evaluate the combined effects of operating two nuclear facilities on one reservoir once WBU becomes operational. The purpose of this report is to present results of cove rotenone sampling conducted on Chickamauga Reservoir in 1992.

  5. Reservoir

    Directory of Open Access Journals (Sweden)

    M. Mokhtar

    2016-12-01

    Full Text Available Scarab field is an analog for the deep marine slope channels in Nile Delta of Egypt. It is one of the Pliocene reservoirs in West delta deep marine concession. Channel-1 and channel-2 are considered as main channels of Scarab field. FMI log is used for facies classification and description of the channel subsequences. Core data analysis is integrated with FMI to confirm the lithologic response and used as well for describing the reservoir with high resolution. A detailed description of four wells penetrated through both channels lead to define channel sequences. Some of these sequences are widely extended within the field under study exhibiting a good correlation between the wells. Other sequences were of local distribution. Lithologic sequences are characterized mainly by fining upward in Vshale logs. The repetition of these sequences reflects the stacking pattern and high heterogeneity of the sandstone reservoir. It also refers to the sea level fluctuation which has a direct influence to the facies change. In terms of integration of the previously described sequences with a high resolution seismic data a depositional model has been established. The model defines different stages of the channel using Scarab-2 well as an ideal analog.

  6. Reflections: Michael Watts interviewed by Murat Arsel

    NARCIS (Netherlands)

    M. Arsel (Murat)

    2009-01-01

    textabstractMichael Watts is ‘Class of 1963’ Chair in Undergraduate Studies and Chancellor’s Professor of Geography at the University of California, Berkeley. Born and raised in rural southwest England, Watts studied at University College London and completed his PhD in 1979 at the University of Mic

  7. James Watt making the world anew

    CERN Document Server

    Russell, Ben

    2014-01-01

    Scottish inventor and mechanical engineer James Watt (1736-1819) is best known for his pioneering work on the steam engine that became fundamental to the incredible changes and developments wrought by the Industrial Revolution. But in this new biography, Ben Russell tells a much bigger, richer story, peering over Watt's shoulder to more fully explore the processes he used and how his ephemeral ideas were transformed into tangible artifacts. Over the course of the book, Russell reveals as much about the life of James Watt as he does a history of Britain's early industrial transformation and the

  8. Watt-Lite; Energy Statistics Made Tangible

    DEFF Research Database (Denmark)

    Jönsson, Li; Broms, Loove; Katzeff, Cecilia

    2011-01-01

    in the physical environments of its employees. The design of Watt-Lite is meant to explore ways of representing, understanding and interacting with electricity in industrial workspaces. We discuss three design inquiries and their implications for the design of Watt-Lite: the use of tangible statistics......Increasing our knowledge of how design affects behaviour in the workplace has a large potential for reducing electricity consumption. This would be beneficial for the environment as well as for industry and society at large. In Western society energy use is hidden and for the great mass...... of consumers its consequences are poorly understood. In order to better understand how we can use design to increase awareness of electricity consumption in everyday life, we will discuss the design of Watt-Lite, a set of three oversized torches projecting real time energy statistics of a factory...

  9. 10 Watts Double-Cladding Fiber Laser

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Considering the wavelength characteristics of the pump high-power laser diode, a modified Fabry-Perot fiber laser resonator is designed. And a fiber laser with more than 10Watts output, near diffraction-limited and operating in the 1110nm region is developed.

  10. Optimization of solar cell contacts by system cost-per-watt minimization

    Science.gov (United States)

    Redfield, D.

    1977-01-01

    New, and considerably altered, optimum dimensions for solar-cell metallization patterns are found using the recently developed procedure whose optimization criterion is the minimum cost-per-watt effect on the entire photovoltaic system. It is also found that the optimum shadow fraction by the fine grid is independent of metal cost and resistivity as well as cell size. The optimum thickness of the fine grid metal depends on all these factors, and in familiar cases it should be appreciably greater than that found by less complete analyses. The optimum bus bar thickness is much greater than those generally used. The cost-per-watt penalty due to the need for increased amounts of metal per unit area on larger cells is determined quantitatively and thereby provides a criterion for the minimum benefits that must be obtained in other process steps to make larger cells cost effective.

  11. Toolkits for Automatic Service Generation: WATT and Kill-A-WATT

    Science.gov (United States)

    Qu, Y.; Bollig, E. F.; Erlebacher, G.

    2007-12-01

    As part of the NSF funded VLab consortium [1], we have been involved in the automatic generation of visualization web services using the Web Automation and Translation Toolkit (WATT) compiler. The WATT compiler converts VTK Tcl input scripts into equivalent yet more efficient C++ web services by interpreting code structure, translating and then integrating bindings to the gSOAP library. WATT seeks to completely automate code distribution, integration of transport protocols and interface generation. Ideally, developers should concentrate on writing core applications, and let WATT transform them into web services in the background. Currently, the WATT compiler is limited to converting known Tcl commands and types to C++. For VTK a simple one to one mapping between Tcl and C++ is enforced, but Tcl commands without direct mappings slow the compilation process and require new mappings to be created. Loops and conditional statements are not yet implemented. In an effort to move forward with automation and not get caught up in the details of cross-language compilation, we developed a new application: Kill-A-WATT (KWATT). KWATT is a C++ application that utilizes the C++/Tcl library [2] to evaluate Tcl input scripts using the official Tcl interpreter. During evaluation of the input script, KWATT interprets code structure, integrating communication details via a Tcl-specific SOAP library [3]. Since KWATT drives the Tcl interpreter, the application has access to the full Tcl command base plus the ability to load new commands from other packages. KWATT is not a compiler; instead, it is a stand-alone application that is itself a web service. When KWATT consumes Tcl input, the generated web methods extend the list of previously available commands. This implies that C++ web methods statically defined in KWATT provide a set of standard methods available to every service. Also, since KWATT uses the Tcl interpreter, it has the potential to accept additional Tcl at any time while

  12. BEIJING BARS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Cappuccino Bar Cappuccino Bar, at the intersection of Dongzhimenwai Dajie and Sanlitun Beijie, Beijing's most vibrant nightlife area, is a hot new destination for European food lovers. With its perfect combination of both energy and tranquility, and surrounded by diplomatic compounds, it is conveniently located near other Beijing destinations including Lady Street

  13. Recent progress on the BIPM watt balance

    Directory of Open Access Journals (Sweden)

    Fang Hao

    2014-01-01

    Full Text Available We present the recent progress on the BIPM (Bureau International des Poids et Mesures watt balance. The existing apparatus was transferred to the dedicated new laboratory with better thermal and vibrational conditions. The apparatus is fully operational in air. An improvement by a factor of three was achieved on the S/N ratio of both the voltage-to-velocity and force-to-current ratios. The fabrication of the parts of the new magnet is completed and its assembly is finished.

  14. Geothermal reservoir engineering. Part 1. Reservoir assessment; Chinetsu choryuso kogaku. 1. Choryuso hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Ishido, T. [Geological Survey of Japan, Tsukuba, Ibaraki (Japan)

    1997-03-15

    This paper is the introduction entitled `Reservoir Assessment` of a lecture on geothermal reservoir engineering. Geothermal resources are described first. The amount of heat released from the inner part of the earth to the surface is 4.2 billion watts. The present technology is able to develop up to 2 to 3 km from the surface. In the section of Geothermal Reservoirs, the concept models of geothermal systems are explained. The development of geothermal reservoirs is essentially to collect heat from the reservoirs. Basically, 2 processes are considered, viz. Cold Sweep and In Situ Boiling. The technical field that is closely related to the reservoir assessment is the geothermal reservoir engineering and this was born in 1970`s. The reservoir modeling is dealt with dividing into 3 headings, viz. Mathematical model and reservoir simulator, Making reservoir model and History of reservoir model at Wairakei. The production forecast and the post-production behavior are also described. 12 refs., 15 figs., 2 tabs.

  15. 78 FR 33117 - Tennessee Valley Authority; Watts Bar Nuclear Plant, Unit 1; Applications and Amendments to...

    Science.gov (United States)

    2013-06-03

    ... access the E-Submittal server for any proceeding in which it is participating; and (2) advise the... server are detailed in the NRC's ``Guidance for Electronic Submission,'' which is available on the NRC's... order to serve documents through the Electronic Information Exchange System, users will be required to...

  16. 78 FR 62709 - Tennessee Valley Authority; Watts Bar Nuclear Plant, Unit 2

    Science.gov (United States)

    2013-10-22

    .... Environmental Impacts of the Proposed Action The environmental impacts associated with the construction of the... staff evaluated the environmental impacts of construction and operation of this plant, issuing comments.... ML082540803) for the operating-license stage (FES-OL), which addressed environmental impacts of......

  17. On the Percolation BCFT and the Crossing Probability of Watts

    CERN Document Server

    Ridout, David

    2008-01-01

    The logarithmic conformal field theory describing critical percolation is further explored using Watts' determination of the probability that there exists a cluster connecting both horizontal and vertical edges. The boundary condition changing operator which governs Watts' computation is identified with a primary field which does not fit naturally within the extended Kac table. Instead a ``shifted'' extended Kac table is shown to be relevant. Augmenting the previously known logarithmic theory based on Cardy's crossing probability by this field, a larger theory is obtained, in which new classes of indecomposable rank-2 modules are present. No rank-3 Jordan cells are yet observed. A highly non-trivial check of the identification of Watts' field is that no Gurarie-Ludwig-type inconsistencies are observed in this augmentation. The article concludes with an extended discussion of various topics related to extending these results including projectivity, boundary sectors and inconsistency loopholes.

  18. Coil motion effects in watt balances: a theoretical check

    Science.gov (United States)

    Li, Shisong; Schlamminger, Stephan; Haddad, Darine; Seifert, Frank; Chao, Leon; Pratt, Jon R.

    2016-04-01

    A watt balance is a precision apparatus for the measurement of the Planck constant that has been proposed as a primary method for realizing the unit of mass in a revised International System of Units. In contrast to an ampere balance, which was historically used to realize the unit of current in terms of the kilogram, the watt balance relates electrical and mechanical units through a virtual power measurement and has far greater precision. However, because the virtual power measurement requires the execution of a prescribed motion of a coil in a fixed magnetic field, systematic errors introduced by horizontal and rotational deviations of the coil from its prescribed path will compromise the accuracy. We model these potential errors using an analysis that accounts for the fringing field in the magnet, creating a framework for assessing the impact of this class of errors on the uncertainty of watt balance results.

  19. Caracterización y control del regulador de WATT

    OpenAIRE

    Carrillo Salagre, Isabel

    2011-01-01

    El propósito de este proyecto es hacer un análisis detallado del regulador de Watt. Desde un punto de vista didáctico, se plantea fabricar un modelo del regulador de Watt. En la actualidad, los alumnos que realizan prácticas de control manejan los controladores mediante un software determinado, dónde modifican unos parámetros y obtienen unos resultados, de esta forma eléctrica no acaban de comprender su funcionamiento. El objetivo de la construcción del regulador es mostrar físicamente en...

  20. Particle Swarm Optimization with Watts-Strogatz Model

    Science.gov (United States)

    Zhu, Zhuanghua

    Particle swarm optimization (PSO) is a popular swarm intelligent methodology by simulating the animal social behaviors. Recent study shows that this type of social behaviors is a complex system, however, for most variants of PSO, all individuals lie in a fixed topology, and conflict this natural phenomenon. Therefore, in this paper, a new variant of PSO combined with Watts-Strogatz small-world topology model, called WSPSO, is proposed. In WSPSO, the topology is changed according to Watts-Strogatz rules within the whole evolutionary process. Simulation results show the proposed algorithm is effective and efficient.

  1. Swisswoodhouse -a building for the 2000-Watt Society; Swisswoodhouse - ein Gebaeude fuer die 2000-Watt-Gesellschaft - Synthesebericht

    Energy Technology Data Exchange (ETDEWEB)

    Menz, T.; Wallbaum, H.; Hardziewski, R.; Graf, S.; Trachsel-Gerber, N.; Koschenz, M.; Guentert, P.

    2009-05-15

    This report deals with a building conceived to meet the requirements of the Swiss '2000-Watt Society' concept. The aims of the project are discussed which feature the demonstration of a forward-looking architectural layout, comfortable and healthy living, environmentally compatible and low resource consumption, standardisation and cost reduction. The report contains seven sections: Basics of the '2000-Watt Society' concept, optimisation of the whole building system, investor-orientated rating, use-oriented monitoring system, the development of the building, standardised building technology and, finally, a description of this pilot project.

  2. A Simple Watt Balance for the Absolute Determination of Mass

    Science.gov (United States)

    Quinn, Terry; Quinn, Lucas; Davis, Richard

    2013-01-01

    A watt balance is an electromechanical device that allows a mass to be determined in terms of measurable electrical and mechanical quantities, themselves traceable to the fundamental constants of physics. International plans are well advanced to redefine the unit of mass, the kilogram, in terms of a fixed numerical value for the Planck constant. A…

  3. 300-Watt Power Source Development at the Jet Propulsion Laboratory

    Science.gov (United States)

    Valdez, Thomas I.

    2005-01-01

    This viewgraph presentation reviews the JPL program to develop a 300 Watt direct methanol fuel cell. The immediate use of the fuel cell is to power test instrumentation on armored vehicles. It reviews the challenges, the system design and the system demonstration.

  4. A Simple Watt Balance for the Absolute Determination of Mass

    Science.gov (United States)

    Quinn, Terry; Quinn, Lucas; Davis, Richard

    2013-01-01

    A watt balance is an electromechanical device that allows a mass to be determined in terms of measurable electrical and mechanical quantities, themselves traceable to the fundamental constants of physics. International plans are well advanced to redefine the unit of mass, the kilogram, in terms of a fixed numerical value for the Planck constant. A…

  5. Stray capacitances in the watt balance operation: electrostatic forces

    CERN Document Server

    Quagliotti, Danilo

    2014-01-01

    In a watt balance, stray capacitances exist between the coil and the magnet. Since the electric current flowing in the coil originates a difference between the coil and magnet electric-potentials, their electrostatic interactions must be taken into account. This paper reports the results of a finite element analysis of the forces acting on the coil.

  6. Stray capacitances in the watt balance operation: electrostatic forces

    DEFF Research Database (Denmark)

    Quagliotti, Danilo; Mana, G.

    2014-01-01

    In a watt balance, stray capacitances exist between the coil and the magnet. Since the electric current flowing in the coil creates a difference in electric potentials between the coil and magnet, their electrostatic interactions must be taken into account. This paper reports the results of a fin...

  7. Theology and psychology – the interdisciplinary work of Fraser Watts

    Directory of Open Access Journals (Sweden)

    Willem J. Smith

    2005-10-01

    Full Text Available In the preface to his book, Theology and Psychology, Fraser Watts, a lecturer in Theology and Natural Science at the University of Cambridge, states that he approaches “… the interface between theology and psychology by looking at each discipline from the perspective of the other. This includes a religious perspective on several current hot topics in psychology, such as evolution, neuroscience, and computer intelligence. I also consider theological topics like divine action, salvation history and eschatology, in each case using the psychological perspective in a different way”. By taking an interdisciplinary approach, Watts aims at proposing a psychology of religious experience. He considers theology to be the rational reflection on the Christian tradition. When exponents of this tradition are in dialogue with exponents of psychology, the focus falls on human nature. Watts admits that a certain lack of competence in one of the two disciplines can be a problem when working in an interdisciplinary way. However, he is willing to take the risk. Watts worked in psychology for 25 years and was also involved with a medical research council, before taking up a position at the Faculty of Divinity, University of Cambridge.

  8. Alignment of the magnetic circuit of the BIPM watt balance

    Science.gov (United States)

    Bielsa, F.; Lu, Y. F.; Lavergne, T.; Kiss, A.; Fang, H.; Stock, M.

    2015-12-01

    The International Bureau of Weights and Measures (BIPM) is developing a watt balance for the forthcoming redefinition of the kilogram. An improved version of the apparatus, based on a new closed magnetic circuit is now being assembled. The new apparatus will significantly reduce the type B uncertainty due to misalignment of the magnetic circuit as this work demonstrates. We present two techniques recently developed to accurately align the magnetic field of the circuit perpendicular to the direction defined by the local acceleration of gravity. Uncertainty below 30 μrad was achieved for both techniques which fulfils the requirements for the BIPM watt balance to enable a Planck constant determination at the 1  ×  10-8 level.

  9. Two-watt, 4-Kelvin closed cycle refrigerator performance

    Science.gov (United States)

    Britcliffe, M.

    1987-01-01

    A 2-watt, 4-K helium refrigerator using the Gifford-McMahon/Joule Thomson cycle is described. The unit features a removable displacer cylinder and high-efficiency, low-pressure drop heat exchangers. These improvements result in a 100 percent increase in cooling power over the existing Deep Space Network system. The effects of the heat exchanger efficiency and Gifford-McMahon expander performance on refrigerator capacity are also discussed.

  10. Optimization of Watt’s Six-bar Linkage to Generate Straight and Parallel Leg Motion

    OpenAIRE

    Saeed Akbarnejad; Hamid Mehdigholi

    2012-01-01

    This paper considers optimal synthesis of a special type of four-bar linkages. Combination of this optimal four-bar linkage with on of it's cognates and elimination of two redundant cognates will result in a Watt's six-bar mechanism, which generates straight and parallel motion. This mechanism can be utilized for legged machines. The advantage of this mechanism is that the leg remains straight during it's contact period and because of it's parallel motion, the legs can be as wide as desired t...

  11. Barred Owl [ds8

    Data.gov (United States)

    California Department of Resources — These data define the current range of Barred and hybrid Barred/Spotted Owls in California. The current range includes the coastal mountains of northern California...

  12. 鄂尔多斯盆地南部延7+8油层组滨浅湖滩坝体系沉积特征%Sedimentary characteristics of the shore-shallow lacustrine beach bar system of Yan 7+8 oil reservoirs in southern Ordos Basin

    Institute of Scientific and Technical Information of China (English)

    王建民

    2013-01-01

    Retrograding sedimentary sequence and shore-shallow lacustrine beach bar system are developed in the Meso-zoic Jurassic Yan ’ an Formation in southern Ordos Basin ,and the latter has close paragenetic relationship with the mean-dering river delta around the lake basin of the Yan ’ an stage .Retrogradation and the destruction of the meandering delta provide clastic input for the development of the low-shallow lake beach bar system .During the depostion of Yan 7+8, An’ sai and Zhidan areas in the north of Shaaxi province were in shore-shallow lacustrine environment .Beach bar deposits were widely developed as the major part of sedimentation ,and can be divided into four microfacies types including beach sand,sand bar,sand sheet and mudstone .Generally,the beach bar sand bodies occur at the side of the river mouth and the flat open shore-shallow lake environment ,and are parallel with the lake shoreline .They are dominated by medium and fine sandstone,and have massive bedding ,wavy bedding,inclined wavy bedding and lenticular bedding ,etc.Beach sand is usually in sheet-like shape and is relatively thin.Bar sand,which is the most representative deposit of the beach bar system ,usually has banded shoreline-parallel distribution ,large thickness ,and lenticular shape on section ,reverse grading at the bottom and transgressive sequences in the middle and upper parts .A series of beach bar sandbodies superimposed with each other in different phases ,forming large-scale shoreline-parallel clustered reservoirs with high net-to-gross ratio . The mudstones of shore-shallow lake facies between the beach bars act as lateral barriers or overlying seals of the beach bar sandbodies .The sedimentary characteristics of the shore-shallow lacustrine beach bar system have significant influ-ences on reservoir development and oil/gas accumulation of the Yan ’ an Formation.%鄂南中生界侏罗系延安组发育退积型沉积层序及滨浅湖滩坝沉积体系;滨浅湖滩坝

  13. On Modified Bar recursion

    DEFF Research Database (Denmark)

    Oliva, Paulo Borges

    2002-01-01

    Modified bar recursion is a variant of Spector's bar recursion which can be used to give a realizability interpretation of the classical axiom of dependent choice. This realizability allows for the extraction of witnesses from proofs of forall-exists-formulas in classical analysis. In this talk I...... shall report on results regarding the relationship between modified and Spector's bar recursion. I shall also show that a seemingly weak form of modified bar recursion is as strong as "full" modified bar recursion in higher types....

  14. 500 Watt Diesel Fueled TPV Portable Power Supply

    Science.gov (United States)

    Horne, W. E.; Morgan, M. D.; Sundaram, V. S.; Butcher, T.

    2003-01-01

    A test-bed 500 watt diesel fueled thermophotovoltaic (TPV) portable power supply is described. The goal of the design is a compact, rugged field portable unit weighing less than 15 pounds without fuel. The conversion efficiency goal is set at 15% fuel energy to electric energy delivered to an external load at 24 volts. A burner/recuperator system has been developed to meet the objectives of high combustion air preheat temperatures with a compact heat exchanger, low excess air operation, and high convective heat transfer rates to the silicon carbide emitter surface. The burner incorporates a air blast atomizer with 100% of the combustion air passing through the nozzle. Designed firing rate of 2900 watts at 0.07 gallons of oil per hour. This incorporates a single air supply dc motor/fan set and avoids the need for a system air compressor. The recuperator consists of three annular, concentric laminar flow passages. Heat from the combustion of the diesel fuel is both radiantly and convectively coupled to the inside wall of a cylindrical silicon carbide emitter. The outer wall of the emitter then radiates blackbody energy at the design temperature of 1400°C. The cylindrical emitter is enclosed in a quartz envelope that separates it from the photovoltaic (PV) cells. Spectral control is accomplished by a resonant mesh IR band-pass filter placed between the emitter and the PV array. The narrow band of energy transmitted by the filter is intercepted and converted to electricity by an array of GaSb PV cells. The array consists of 216 1-cm × 1-cm GaSb cells arranged into series and parallel arrays. An array of heat pipes couple the PV cell arrays to a heat exchanger which is cooled by forced air convection. A brief status of the key TPV technologies is presented followed by data characterizing the performance of the 500 watt TPV system.

  15. Characterization of flexure hinges for the French watt balance experiment

    Directory of Open Access Journals (Sweden)

    Pinot Patrick

    2014-01-01

    Full Text Available In the French watt balance experiment, the translation and rotation functions must have no backlash, no friction, nor the need for lubricants. In addition errors in position and movement must be below 100 nm. Flexure hinges can meet all of these criteria. Different materials, profile shapes and machining techniques have been studied. The flexure pivots have been characterized using three techniques: 1 an optical microscope and, if necessary, a SEM to observe the surface inhomogeneities; 2 a mass comparator to determine the bending stiffness of unloaded pivots; 3 a loaded beam oscillating freely under vacuum to study the dynamic behavior of loaded pivots.

  16. High Throughput 600 Watt Hall Effect Thruster for Space Exploration

    Science.gov (United States)

    Szabo, James; Pote, Bruce; Tedrake, Rachel; Paintal, Surjeet; Byrne, Lawrence; Hruby, Vlad; Kamhawi, Hani; Smith, Tim

    2016-01-01

    A nominal 600-Watt Hall Effect Thruster was developed to propel unmanned space vehicles. Both xenon and iodine compatible versions were demonstrated. With xenon, peak measured thruster efficiency is 46-48% at 600-W, with specific impulse from 1400 s to 1700 s. Evolution of the thruster channel due to ion erosion was predicted through numerical models and calibrated with experimental measurements. Estimated xenon throughput is greater than 100 kg. The thruster is well sized for satellite station keeping and orbit maneuvering, either by itself or within a cluster.

  17. Characterization of flexure hinges for the French watt balance experiment

    Science.gov (United States)

    Pinot, Patrick; Genevès, Gérard

    2014-08-01

    In the French watt balance experiment, the translation and rotation functions must have no backlash, no friction, nor the need for lubricants. In addition errors in position and movement must be below 100 nm. Flexure hinges can meet all of these criteria. Different materials, profile shapes and machining techniques have been studied. The flexure pivots have been characterized using three techniques: 1) an optical microscope and, if necessary, a SEM to observe the surface inhomogeneities; 2) a mass comparator to determine the bending stiffness of unloaded pivots; 3) a loaded beam oscillating freely under vacuum to study the dynamic behavior of loaded pivots.

  18. Observation of B0bar --> D0 K0bar and B0bar --> D0 K*0bar decays

    CERN Document Server

    Krokovnyi, P P

    2003-01-01

    We report on a search for B0bar --> D0 K(*)0bar decays based on 85 10^6 BBar events collected with the Belle detector at KEKB. The B0bar --> D0 K0bar and B0bar --> D0 K*0bar decays have been observed for the first time with the branching fractions Br(B0bar --> D0 K0bar) = (5.0^{+1.3}_{-1.2}+- 0.6) 10^{-5} and Br(B0bar --> D0 K*0bar) = (4.8^{+1.1}_{-1.0}+- 0.5) 10^{-5}. No significant signal has been found for the B0bar --> D*0 K(*)0bar and B0bar --> D(*)0bar K*0bar decay modes, and upper limits at 90% CL are presented.

  19. The four bars problem

    Science.gov (United States)

    Mauroy, Alexandre; Taslakian, Perouz; Langerman, Stefan; Jungers, Raphaël

    2016-09-01

    A four-bar linkage is a mechanism consisting of four rigid bars which are joined by their endpoints in a polygonal chain and which can rotate freely at the joints (or vertices). We assume that the linkage lies in the 2-dimensional plane so that one of the bars is held horizontally fixed. In this paper we consider the problem of reconfiguring a four-bar linkage using an operation called a pop. Given a four-bar linkage, a pop reflects a vertex across the line defined by its two adjacent vertices along the polygonal chain. Our main result shows that for certain conditions on the lengths of the bars, the neighborhood of any configuration that can be reached by smooth motion can also be reached by pops. The proof relies on the fact that pops are described by a map on the circle with an irrational number of rotation.

  20. Bar and Theta Hyperoperations

    Directory of Open Access Journals (Sweden)

    Thomas Vougiouklis

    2011-12-01

    Full Text Available In questionnaires the replacement of the scale of Likert by a bar was suggested in 2008 by Vougiouklis & Vougiouklis. The use of the bar was rapidly accepted in social sciences. The bar is closely related with fuzzy theory and has several advantages during both the filling-in questionnaires and mainly in the research processing. In this paper we relate hyperstructure theory with questionnaires and we study the obtained hyperstructures which are used as an organising device of the problem.

  1. Microbial contamination of "In use" bar soap in dental clinics

    Directory of Open Access Journals (Sweden)

    Hegde P

    2006-01-01

    Full Text Available Bar soap from 18 different dental clinics were investigated for microbial contamination, while it was "in-use". Of the 32 samples obtained from the bar soap, 100% yielded positive culture. A total of 8 different genera of organisms were isolated. Each bar soap was found to harbor 2-5 different genera of micro organisms. Heavily used soap had more micro organisms compared to less used soap. The microbial load of the "in-use" bar soap constituted a mixed flora of gram positive, gram negative, aerobes, anaerobes, and fungi. The results indicate that the bar soap under "in-use" condition is a reservoir of microorganisms and handwashing with such a soap may lead to spread of infection.

  2. Bar-tailed

    NARCIS (Netherlands)

    Duijns, S.; Hidayati, N.A.; Piersma, T.

    2013-01-01

    Capsule Across the European wintering range Bar-tailed Godwits Limosa lapponica lapponica selected polychaete worms and especially Ragworms Hediste diversicolor, with differences between areas due to variations in prey availability.Aims To determine the diet of Bar-tailed Godwits across their winter

  3. Short Nuss bar procedure

    DEFF Research Database (Denmark)

    Pilegaard, Hans Kristian

    2016-01-01

    The Nuss procedure is now the preferred operation for surgical correction of pectus excavatum (PE). It is a minimally invasive technique, whereby one to three curved metal bars are inserted behind the sternum in order to push it into a normal position. The bars are left in situ for three years...

  4. The Frequency-Watt Function: Simulation and Testing for the Hawaiian Electric Companies

    Energy Technology Data Exchange (ETDEWEB)

    Hoke, Anderson F. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nelson, Austin A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tan, Jin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mahmud, Rasel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Elkhatib, Mohamed [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Antonio, Chris [Hawaiian Electric Companies, Honolulu, HI (United States); Arakawa, Dean [Hawaiian Electric Companies, Honolulu, HI (United States); Fong, Ken [Hawaiian Electric Companies, Honolulu, HI (United States)

    2017-07-25

    This interim report describes research related to frequency-watt control of solar photovoltaic (PV) inverters conducted under the U.S. Department of Energy's Grid Modernization Laboratory Consortium (GMLC) by a regional partnership for Hawaii. The purpose of this report is to inform an ongoing discussion around frequency-watt control activation in Hawaii.

  5. Request for One-Time Shipment of 32 Watt PU-328 Source in 9968 Packaging

    Energy Technology Data Exchange (ETDEWEB)

    Massey, W.M.

    1998-11-25

    The 9968 package is designed for surface shipment of fissile and other radioactive materials where a high degree of double containment is required. The use of the 9968 radioactive material package for a one time shipment of a 32 watt heat source versus the SARP approved maximum 30 watt heat source is addressed in this report. The analyses show that the small increase in heat load from 30 watts to 32 watts does not substantially increase internal temperatures or pressures that would approach limits for the package. Also, the weight of the content is within the current 9968 package limits. It is concluded that the 32-watt heat source can be safely shipped in the 9968 package and therefore a waiver to ship the source is justified.

  6. Research and Development of Beach -Bar Sandstone Reservoir in Bamianhe Oilfield%八面河地区滩坝砂储层研究及开发实践--以面4-面14区沙四1砂组为例

    Institute of Scientific and Technical Information of China (English)

    杨伟; 陈军霞

    2015-01-01

    There is a large range of beach-bar sandstone reservoir in Bamianhe Oilfield with a large scale of reserves among which untouched reserves of thin oil suitable for water -flooding and Class 1 heavy oil are majorly distributed in 1st sand group of Sha-4 member of Mian 4-14 at the main tectonic belt .Based on Static and dynamic data ,in‐terpretation standard is reenacted to interpret the reservoir again and estimate its oiliness and physical property . Three years of development practice in the new district proves that early water -flooding ,proper shortening of well spacing and beforehand filling modification are suitable to such a reservoir .%八面河油田滩坝砂储层分布范围较广,未动用储量达两千余万吨,储量规模大。其中适合注水开发的稀油和普通稠油Ⅰ类油藏未动用储量主要分布在主体构造带的面4-面14区沙四段1砂组。此次主要通过岩芯、生产动态等静动态资料,重新制定解释标准,对储层进行二次解释。并结合测井资料归一化成果,对储层含油性、物性特征做出评价。进而综合开发方式及配套工艺优化组合研究成果,优选区域开展评价和新区产能建设。通过近三年的新区产建实践,证实先期注水开发、适当缩小井距的开发方式及预充填改造等配套工艺是适合该区域储层,能够满足其储层开发需要。

  7. Modeling Study of High Pressure and High Temperature Reservoir Fluids

    DEFF Research Database (Denmark)

    Varzandeh, Farhad

    to 250 °C and 2400 bar, in the deep petroleum reservoirs. Furthermore, many of these deep reservoirs are found offshore, including the North Sea and the Gulf of Mexico, making the development even more risky. On the other hand, development of these high pressure high temperature (HPHT) fields can...

  8. Sports Season, Sports Bars

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ For foreigners in Beijing, the sports bar is a special place, a place to gather for watching matches and a place to feel the familiarity of home, while for some sports enthusiasts it serves as their second home.

  9. Short Nuss bar procedure

    Science.gov (United States)

    2016-01-01

    The Nuss procedure is now the preferred operation for surgical correction of pectus excavatum (PE). It is a minimally invasive technique, whereby one to three curved metal bars are inserted behind the sternum in order to push it into a normal position. The bars are left in situ for three years and then removed. This procedure significantly improves quality of life and, in most cases, also improves cardiac performance. Previously, the modified Ravitch procedure was used with resection of cartilage and the use of posterior support. This article details the new modified Nuss procedure, which requires the use of shorter bars than specified by the original technique. This technique facilitates the operation as the bar may be guided manually through the chest wall and no additional stabilizing sutures are necessary. PMID:27747185

  10. Multi-Watt Small Radioisotope Thermoelectric Generator Conceptual Design Study

    Science.gov (United States)

    Determan, William R.; Otting, William; Frye, Patrick; Abelson, Robert; Ewell, Richard; Miyake, Bob; Synder, Jeff

    2007-01-01

    A need has been identified for a small, light-weight, reliable power source using a radioisotope heat source, to power the next generation of NASA's small surface rovers and exploration probes. Unit performance, development costs, and technical risk are key criteria to be used to select the best design approach. Because safety can be a major program cost and schedule driver, RTG designs should utilize the DOE radioisotope safety program's data base to the maximum extent possible. Other aspects important to the conceptual design include: 1) a multi-mission capable design for atmospheric and vacuum environments, 2) a module size based on one GPHS Step 2 module, 3) use of flight proven thermoelectric converter technologies, 4) a long service lifetime of up to 14 years, 5) maximize unit specific power consistent with all other requirements, and 6) be ready by 2013. Another critical aspect of the design is the thermal integration of the RTG with the rover or probe's heat rejection subsystem and the descent vehicle's heat rejection subsystem. This paper describes two multi-watt RTG design concepts and their integration with a MER-class rover.

  11. 77 FR 41811 - In the Matter of Tennessee Valley Authority Watts Bar Nuclear Plant EA-12-021; Confirmatory Order...

    Science.gov (United States)

    2012-07-16

    ... need for such training thereafter. f. TVA will enhance existing 10 CFR 50.9-related general employee training (GET) for new employees, including contractor and subcontractor employees located at TVA nuclear... training (both manager/supervisor as well as craft-level) to employees, including contractor...

  12. The Watts-Strogatz network model developed by including degree distribution: theory and computer simulation

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y W [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China); Zhang, L F [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China); Huang, J P [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China)

    2007-07-20

    By using theoretical analysis and computer simulations, we develop the Watts-Strogatz network model by including degree distribution, in an attempt to improve the comparison between characteristic path lengths and clustering coefficients predicted by the original Watts-Strogatz network model and those of the real networks with the small-world property. Good agreement between the predictions of the theoretical analysis and those of the computer simulations has been shown. It is found that the developed Watts-Strogatz network model can fit the real small-world networks more satisfactorily. Some other interesting results are also reported by adjusting the parameters in a model degree-distribution function. The developed Watts-Strogatz network model is expected to help in the future analysis of various social problems as well as financial markets with the small-world property.

  13. A Liquid Hydrogen Cooler with a Cooling Capacity of 20 Watts Project

    Data.gov (United States)

    National Aeronautics and Space Administration — For the future spaceport and long-term storage of liquid hydrogen NASA requires cryocoolers that can provide cooling power in the range of 20 watts at 20 K. The...

  14. First measurements of the flux integral with the NIST-4 watt balance

    CERN Document Server

    Haddad, D; Chao, L S; Cao, A; Sineriz, G; Pratt, J R; Newell, D B; Schlamminger, S

    2015-01-01

    In early 2014, construction of a new watt balance, named NIST-4, has started at the National Institute of Standards and Technology (NIST). In a watt balance, the gravitational force of an unknown mass is compensated by an electromagnetic force produced by a coil in a magnet system. The electromagnetic force depends on the current in the coil and the magnetic flux integral. Most watt balances feature an additional calibration mode, referred to as velocity mode, which allows one to measure the magnetic flux integral to high precision. In this article we describe first measurements of the flux integral in the new watt balance. We introduce measurement and data analysis techniques to assess the quality of the measurements and the adverse effects of vibrations on the instrument.

  15. Construction of a new watt balance with the goal to realize the kilogram in the US

    Science.gov (United States)

    Schlamminger, Stephan; Haddad, Darine; Seifert, Frank; Chao, Leon; Newell, David; Pratt, Jon

    2015-04-01

    A watt balance is a mechanical device that compares mechanical power to electrical power. Since electrical power is measured using quantum physics by employing the Josephson effect and the Quantum Hall effect, electrical power can be measured as a product of a known factor, two frequencies, and the Planck constant h. Mechanical power is given by mgv , where m is the mass of a weight, g the local acceleration, and v the velocity. Hence, the watt balance provides a link between mass and Planck's constant. Currently several watt balances worldwide are employed to measure h. A redefinition of the international system of units (SI) is currently in discussion and may become reality as early as 2018. In the new SI, the numerical value of the Planck constant will be fixed and the watt balance is a means to realize the unit of mass. Researchers at NIST are preparing for a new SI and we have started in 2011 with plans to design a new watt balance capable of realizing the kilogram with relative uncertainties of a few parts in 108. Construction of the new watt balance has started in 2014. In my talk, I will show some of the latest results achieved with this apparatus.

  16. Error bars in experimental biology.

    Science.gov (United States)

    Cumming, Geoff; Fidler, Fiona; Vaux, David L

    2007-04-09

    Error bars commonly appear in figures in publications, but experimental biologists are often unsure how they should be used and interpreted. In this article we illustrate some basic features of error bars and explain how they can help communicate data and assist correct interpretation. Error bars may show confidence intervals, standard errors, standard deviations, or other quantities. Different types of error bars give quite different information, and so figure legends must make clear what error bars represent. We suggest eight simple rules to assist with effective use and interpretation of error bars.

  17. Gaseous Structures in Barred Galaxies: Effects of the Bar Strength

    CERN Document Server

    Kim, Woong-Tae; Kim, Yonghwi

    2012-01-01

    Using hydrodynamic simulations, we investigate the physical properties of gaseous substructures in barred galaxies and their relationships with the bar strength. The gaseous medium is assumed to be isothermal and unmagnetized. The bar potential is modeled as a Ferrers prolate with index n. To explore situations with differing bar strength, we vary the bar mass fbar relative to the spheroidal component as well as its aspect ratio. We derive expressions as functions of fbar and the aspect ratio for the bar strength Qb and the radius r(Qb) where the maximum bar torque occurs. When applied to observations, these expressions suggest that bars in real galaxies are most likely to have fbar=0.25-0.5 and n0.2 and self-gravity is included.

  18. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, Paul; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second pap

  19. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, Paul; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second pap

  20. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, Paul; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second

  1. Highest Oxygen Bar

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The world’s highest altitude Lhalu Wetland in Tibet is rebounding from past environmental damage In Lhasa, where the oxygen content is just 60 percent of that of the plain area, a place known as the "natural oxygen bar"is highly prized by residents.

  2. Raising the bar (2)

    NARCIS (Netherlands)

    Elhorst, P.; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    In this editorial we summarise and comment on the papers published in issue 11.2 so as to raise the bar in applied spatial economic research and highlight new trends. The first paper analyses which regions in Europe were resilient to the great Recession and which ones were not. The second and the th

  3. Multiple bars and secular evolution

    Science.gov (United States)

    Shen, Juntai

    2015-03-01

    Bars are the most important driver of secular evolution. A significant fraction of barred galaxies also harbor small secondary bars. Secondary bars are visible even in near-infrared images, so they are not just dusty and blue, but stellar features (Erwin & Sparke 2002). Since they are quite common, secondary bars are probably long-lived stellar features. The random relative orientation of the two bars indicates that they are dynamically decoupled with different pattern speeds (Buta & Crocker 1993). Corsini et al. (2003) presented conclusive direct kinematic evidence for a decoupled secondary bar in NGC 2950. Dynamically decoupled secondary bars have long been hypothesized to be a mechanism to drive gas past the ILR of primary bars to feed active galactic nuclei (Shlosman et al. 1989). However, the dynamics of secondary bars are still not well understood, and it is still unclear what role secondary bars play in the AGN fueling process. Numerical simulations offer the best approach to understanding double-barred systems. Decoupled secondary bar in the earlier gaseous simulations only last a short time (body simulations are preferred to further our understanding of double-barred systems. Debattista & Shen (2007) and Shen & Debattista (2009) managed to form long-lived double-barred systems with purely collisionless simulations, where a pre-existing rotating pseudo-bulge is introduced initially. The shape and size of secondary bars in the models are comparable to observed ones. They found that the rotation of the two bars is not rigid. The amplitude and pattern speed of the secondary bars oscillate as they rotate through their primary counterparts. Although the secondary bar rotates faster than the primary bar in this model, the stellar velocity field in the central region only shows a weakly twisted kinematic minor axis. Recently more simulations of double-barred galaxies with simpler initial conditions are explored (Du, Shen & Debattista 2014). We expect that the new

  4. Wavelength beam combining of a 980-nm tapered diode laser bar in an external cavity

    Science.gov (United States)

    Vijayakumar, Deepak; Jensen, Ole Bjarlin; Thestrup, Birgitte

    2010-04-01

    High power diode lasers are used in a large number of applications. A limiting factor for more widespread use of broad area lasers is the poor beam quality. Gain guided tapered diode lasers are ideal candidates for industrial applications that demands watt level output power with good beam quality. By adapting a bar geometry, the output power could be scaled even up to several tens of watts. Unfortunately, the high divergence which is a characteristic feature of the bar geometry could lead to a degradation of the overall beam quality of the laser bar. However, spectral beam combining is an effective solution for preserving the beam quality of the bar in the range of that of a single emitter and at the same time, enabling the power scaling. We report spectral beam combining applied to a 12 emitter tapered laser bar at 980 nm. The external cavity has been designed for a wavelength separation of 4.0 nm between the emitters. An output power of 9 W has been achieved at an operating current of 30 A. The combined beam had an M2 value (1/e2) of 5.3 along the slow axis which is comparable to that of a single tapered emitter on the laser bar. The overall beam combining efficiency was measured to be 63%. The output spectrum of the individual emitters was narrowed considerably. In the free running mode, the individual emitters displayed a broad spectrum of the order of 0.5-1.0 nm while the spectral width has been reduced to 30-100 pm in the spectral beam combining mode.

  5. Error bars in experimental biology

    OpenAIRE

    2007-01-01

    Error bars commonly appear in figures in publications, but experimental biologists are often unsure how they should be used and interpreted. In this article we illustrate some basic features of error bars and explain how they can help communicate data and assist correct interpretation. Error bars may show confidence intervals, standard errors, standard deviations, or other quantities. Different types of error bars give quite different information, and so figure legends must make clear what er...

  6. Membrane biology: fission behind BARs.

    Science.gov (United States)

    Haucke, Volker

    2012-06-05

    Membrane bending is accomplished in part by amphipathic helix insertion into the bilayer and the assembly of BAR domain scaffolds preparing the membrane for fission. Two recent studies highlight the roles of amphipathic helices and BAR scaffolds in membrane fission and establish the structural basis of membrane bending by the N-BAR protein endophilin.

  7. Observations of offshore bar decay

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian

    2010-01-01

    Long-term, net offshore bar migration is a common occurrence on many multiple-barred beaches. The first stage of the process involves the generation of a longshore bar close to the shoreline that oscillates about a mean position for some time, followed by a stage of net offshore migration across...

  8. Dark Matter Trapping by Stellar Bars: The Shadow Bar

    Science.gov (United States)

    Petersen, Michael S.; Weinberg, Martin D.; Katz, Neal

    2016-09-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of three over the rate predicted by dynamical friction with an untrapped dark halo, and thus provides a possible physical explanation for the observed prevalence of fast bars in nature.

  9. Dark Matter Trapping by Stellar Bars: The Shadow Bar

    CERN Document Server

    Petersen, Michael S; Katz, Neal

    2016-01-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of three over the naive dynamical friction prediction, and thus provides a possible physical explanation for the observed prevalence of fast bars in nat...

  10. Dark matter trapping by stellar bars: the shadow bar

    Science.gov (United States)

    Petersen, Michael S.; Weinberg, Martin D.; Katz, Neal

    2016-12-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of 3 over the rate predicted by dynamical friction with an untrapped dark halo, and thus provides a possible physical explanation for the observed prevalence of fast bars in nature.

  11. The bar instability revisited

    CERN Document Server

    Chiodi, Filippo; Claudin, Philippe

    2012-01-01

    The river bar instability is revisited, using a hydrodynamical model based on Reynolds averaged Navier-Stokes equations. The results are contrasted with the standard analysis based on shallow water Saint-Venant equations. We first show that the stability of both transverse modes (ripples) and of small wavelength inclined modes (bars) predicted by the Saint-Venant approach are artefacts of this hydrodynamical approximation. When using a more reliable hydrodynamical model, the dispersion relation does not present any maximum of the growth rate when the sediment transport is assumed to be locally saturated. The analysis therefore reveals the fundamental importance of the relaxation of sediment transport towards equilibrium as it it is responsible for the stabilisation of small wavelength modes. This dynamical mechanism is characterised by the saturation number, defined as the ratio of the saturation length to the water depth Lsat/H. This dimensionless number controls the transition from ripples (transverse patte...

  12. Breaking through the Bar

    Science.gov (United States)

    Gray, Katti

    2011-01-01

    Howard University School of Law had a problem, and school officials knew it. Over a 20-year period, 40 percent of its graduates who took the Maryland bar exam failed it on their first try. During the next 24 months--the time frame required to determine its "eventual pass rate"--almost 90 percent of the students did pass. What they did not know was…

  13. Strained graphene Hall bar

    Science.gov (United States)

    Milovanović, S. P.; Peeters, F. M.

    2017-02-01

    The effects of strain, induced by a Gaussian bump, on the magnetic field dependent transport properties of a graphene Hall bar are investigated. The numerical simulations are performed using both classical and quantum mechanical transport theory and we found that both approaches exhibit similar characteristic features. The effects of the Gaussian bump are manifested by a decrease of the bend resistance, R B, around zero-magnetic field and the occurrence of side-peaks in R B. These features are explained as a consequence of bump-assisted scattering of electrons towards different terminals of the Hall bar. Using these features we are able to give an estimate of the size of the bump. Additional oscillations in R B are found in the quantum description that are due to the population/depopulation of Landau levels. The bump has a minor influence on the Hall resistance even for very high values of the pseudo-magnetic field. When the bump is placed outside the center of the Hall bar valley polarized electrons can be collected in the leads.

  14. Barred Galaxies: an Observer's Perspective

    CERN Document Server

    Gadotti, Dimitri A

    2008-01-01

    I review both well established and more recent findings on the properties of bars, and their host galaxies, stemming from photometric and spectroscopic observations, and discuss how these findings can be understood in terms of a global picture of the formation and evolution of bars, keeping a connection with theoretical developments. In particular, I show the results of a detailed structural analysis of ~ 300 barred galaxies in the Sloan Digital Sky Survey, providing physical quantities, such as bar length, ellipticity and boxyness, and bar-to-total luminosity ratio, that can either be used as a solid basis on which realistic models can be built, or be compared against more fundamental theoretical results. I also show correlations that indicate that bars grow longer, thinner and stronger with dynamical age, and that the growth of bars and bulges is connected. Finally, I briefly discuss open questions and possible directions for future research.

  15. The '2000-Watt per person'- industrial society - Utopia, vision or necessity?; Die '2000 Watt pro Kopf'-Industriegesellschaft - Utopie, Vision oder Notwendigkeit?

    Energy Technology Data Exchange (ETDEWEB)

    Jochem, E

    2006-07-01

    This short article takes a look at the '2000-Watt per person' concept initially developed at the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1998. The author is of the opinion that the concept is not utopian but a vision that can be realised - providing it is accepted socially and that politics can implement it. Further work on the concept done at the ETH over the years is listed and commented on. A diagram provides an overview of energy resources, energy transformation and energy flows to final energy consumption. The question as to if the realisation of such a '2000-Watt'-society is actually necessary is posed.

  16. A discussion of $Bl$ conservation on a two dimensional magnetic field plane in watt balances

    CERN Document Server

    Li, Shisong; Huang, Songling

    2015-01-01

    The watt balance is an experiment being pursued in national metrology institutes for precision determination of the Planck constant $h$. In watt balances, the $1/r$ magnetic field, expected to generate a geometrical factor $Bl$ independent to any coil horizontal displacement, can be created by a strict two dimensional, symmetric (horizontal $r$ and vertical $z$) construction of the magnet system. In this paper, we present an analytical understanding of magnetic field distribution when the $r$ symmetry of the magnet is broken and the establishment of the $Bl$ conservation is shown. By using either Gauss's law on magnetism with monopoles or conformal transformations, we extend the $Bl$ conservation to arbitrary two dimensional magnetic planes where the vertical magnetic field component equals zero. The generalized $Bl$ conservation allows a relaxed physical alignment criteria for watt balance magnet systems.

  17. A LEGO Watt balance: An apparatus to determine a mass based on the new SI

    Science.gov (United States)

    Chao, L. S.; Schlamminger, S.; Newell, D. B.; Pratt, J. R.; Seifert, F.; Zhang, X.; Sineriz, G.; Liu, M.; Haddad, D.

    2015-11-01

    A global effort to redefine our International System of Units (SI) is underway, and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. In particular, the unit of mass (the kilogram) will be realized through a fixed value of the Planck constant h. A so-called watt balance, for example, can then be used to realize the kilogram unit of mass within a few parts in 108. Such a balance has been designed and constructed at the National Institute of Standards and Technology. For educational outreach and to demonstrate the principle, we have constructed a LEGO tabletop watt balance capable of measuring a gram-level masses to 1% relative uncertainty. This article presents the design, construction, and performance of the LEGO watt balance and its ability to determine h.

  18. Random walk in degree space and the time-dependent Watts-Strogatz model

    CERN Document Server

    Grande, H L Casa; Hase, M O

    2016-01-01

    In this work, we propose a scheme that provides an analytical estimate for the time-dependent degree distribution of some networks. This scheme maps the problem into a random walk in degree space, and then we choose the paths that are responsible for the dominant contributions. The method is illustrated on the dynamical versions of the Erd\\"os-R\\'enyi and Watts-Strogatz graphs, which were introduced as static models in the original formulation. We have succeeded in obtaining an analytical form for the dynamics Watts-Strogatz model, which is asymptotically exact for some regimes.

  19. Evolutionary snowdrift game on heterogeneous Newman-Watts small-world network

    Institute of Scientific and Technical Information of China (English)

    Yang Han-Xin; Gao Kun; Han Xiao-Pu; Wang Bing-Hong

    2008-01-01

    We study the evolutionary snowdrift game in a heterogeneous Newman-Watts small-world network. The hetero-geneity of the network is controlled by the number of hubs. It is found that the moderate heterogeneity of the network can promote the cooperation best. Besides, we study how the hubs affect the evolution of cooperative behaviours of the heterogeneous Newman-Watts small-world network. Simulation results show that both the initial states of hubs and the connections between hubs can play an important role. Our work gives a further insight into the effect of hubs on the heterogeneous networks.

  20. Bar piezoelectric ceramic transformers.

    Science.gov (United States)

    Erhart, Jiří; Pulpan, Půlpán; Rusin, Luboš

    2013-07-01

    Bar-shaped piezoelectric ceramic transformers (PTs) working in the longitudinal vibration mode (k31 mode) were studied. Two types of the transformer were designed--one with the electrode divided into two segments of different length, and one with the electrodes divided into three symmetrical segments. Parameters of studied transformers such as efficiency, transformation ratio, and input and output impedances were measured. An analytical model was developed for PT parameter calculation for both two- and three-segment PTs. Neither type of bar PT exhibited very high efficiency (maximum 72% for three-segment PT design) at a relatively high transformation ratio (it is 4 for two-segment PT and 2 for three-segment PT at the fundamental resonance mode). The optimum resistive loads were 20 and 10 kΩ for two- and three-segment PT designs for the fundamental resonance, respectively, and about one order of magnitude smaller for the higher overtone (i.e., 2 kΩ and 500 Ω, respectively). The no-load transformation ratio was less than 27 (maximum for two-segment electrode PT design). The optimum input electrode aspect ratios (0.48 for three-segment PT and 0.63 for two-segment PT) were calculated numerically under no-load conditions.

  1. The decays \\bar{B}->\\bar{K}D and \\bar{B}-> \\bar{K}\\bar{D} and final state interactions

    CERN Document Server

    Fayyazuddin, A

    2001-01-01

    The decays \\bar{B}-> \\bar{K}D and \\bar{B}-> \\bar{K}\\bar{D} taking into account final state interactions are discussed. These decays are described by four strong phases \\delta_0,\\delta_1,\\bar{\\delta}_0,\\bar{\\delta}_1 (subscripts 0 and 1 refers to I=0 and I=1 final states), one weak phase \\gamma and four real amplitudes. It is argued that strong interaction dynamics implies \\bar{\\delta}_1=0,\\delta_0=-\\delta_1. Rescattering has significant effects on weak amplitudes. Taking into account, rescattering, we find that direct CP--violating asymmetry in these decays may lie in the range \\mp 0.023\\sin \\gamma \\leq \\QTR{cal}{A}_{1,2}\\leq \\mp 0.086\\sin \\gamma.

  2. Texture and microstructure evolution in nickel electrodeposited from an additive-free Watts electrolyte

    DEFF Research Database (Denmark)

    Alimadadi, Hossein; da Silva Fanta, Alice Bastos; Kasama, Takeshi;

    2016-01-01

    Nickel layers with 〈100〉, 〈210〉, 〈110〉 and 〈211〉 fiber textures were electrodeposited from additive-free Watts type electrolytes by adjusting both the pH and the applied current density. Quantitative crystallographic texture analysis by XRD was supplemented by micro-texture analysis applying EBSD...

  3. A 1-Watt Ku-Band Power Amplifier MMIC Using Cost-Effective Organic SMD Package

    NARCIS (Netherlands)

    Bessemoulin, A.; Parisot, M.; Quentin, P.; Saboureau, C.; Heijningen, M. van; Priday, J.

    2004-01-01

    This paper presents the design and performance of a compact 1-Watt Ku-band power amplifier MMIC implemented in a novel microwave organic power package, compatible with SMD assembly lines. Due to the use of simple materials, like RO4003 substrate and copper, it allows significant cost reduction for

  4. A 1-Watt Ku-Band Power Amplifier MMIC Using Cost-Effective Organic SMD Package

    NARCIS (Netherlands)

    Bessemoulin, A.; Parisot, M.; Quentin, P.; Saboureau, C.; Heijningen, M. van; Priday, J.

    2004-01-01

    This paper presents the design and performance of a compact 1-Watt Ku-band power amplifier MMIC implemented in a novel microwave organic power package, compatible with SMD assembly lines. Due to the use of simple materials, like RO4003 substrate and copper, it allows significant cost reduction for R

  5. Registration error study of digital watt-hour meters under distorted conditions

    Science.gov (United States)

    Reta-Hernandez, Manuel

    The increasing application of non-linear loads based on the use of converters, uninterruptible power supplies, and other solid-state switching devices has increased the harmonic content in voltage and current at metering points. One of many problems caused by the voltage and current distortion is the effect on the watt-hour meter performance. The digital watt-hour meter is replacing the old induction meter for measuring electric energy, obtaining additional flexibility and functionality. However, the digital meter performance can be deeply affected when a dc current component is added to the distorted conditions. This dissertation presents a study of the digital watt-hour meter's performance under different nonsinusoidal conditions, including a dc current component. The work is divided into two sections: experimental and analytical. The experimental section consists of accuracy testing on several models of digital meters, both single-phase and three-phase units, subjected to computer-controlled distortion. The system setup used for the measurements was designed by using 12-bits data acquisition hardware (DAQ) and virtual-instrument software (VI) installed in a personal computer. Additional testing on electromechanical watt-hour meters is included for comparison purposes.

  6. Results of metallographical diagnostic examination of Navy half-watt thermoelectric converters degraded by accelerated tests

    Science.gov (United States)

    Rosell, F. E., Jr.; Rouklove, P. G.

    1977-01-01

    To verify the 15-year reliability of the Navy half-watt radioisotope thermoelectric generator (RTG), bismuth-telluride thermoelectric converters were submitted to testing at high temperatures which accelerated the degradation and caused failure of the converters. Metallographic diagnostic examination of failed units verified failure mechanisms. Results of diagnostic examinations are presented.

  7. Design of multihundred-watt dynamic isotope power system for robotic space missions

    Science.gov (United States)

    Bents, D. J.; Geng, S. M.; Schreiber, J. G.; Withrow, C. A.; Schmitz, P. C.; McComas, T. J.

    The design of a multihundred-watt dynamic isotope power system (DIPS) based on the US Department of Energy (DOE) general-purpose heat source (GPHS) and small (multihundred-watt) free-piston Stirling engine (FPSE) is described as a potential lower cost alternative to radioisotope thermoelectric generators (RTGs). The design is targeted at the power needs of future unmanned deep space and planetary surface exploration missions. Since the competitive potential of FPSE as an isotope convertor was first identified, work has focused on the feasibility of directly integrating GPHS with the Stirling heater head. Thermal modeling of various radiatively coupled heat source/heater head geometries has been performed using data furnished by the developers of FPSE and GPHS. The analysis indicates that, for the 1050 K heater head configurations considered, GPHS fuel clad temperatures remain safe operating limits under all conditions including shutdown of one engine on a twin engine unit. Based on these results, preliminary characterizations of multihundred-watt units have been established. They indicate that, per electrical watt, the GPHS/small Stirling DIPS will be roughly equivalent to MOD RTG in size and mass but will require about a third the amount of isotope fuel.

  8. Rock the Watt: An Energy Conservation Campaign at Pacific Northwest National Lab

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-01-01

    Case study describes Pacific Northwest National Laboratory's (PNNL) three-month Rock the Watt campaign to reduce energy use at its main campus in Richland, Washington. The campaign objectives were to educate PNNL employees about energy conservation opportunities in their workplace and to motivate them to help PNNL save energy and costs and to reduce greenhouse gas emissions.

  9. Method of defining isolation parameters in 1000 Watt symmetric electricity network

    Directory of Open Access Journals (Sweden)

    Samat Amurgaliev

    2009-10-01

    Full Text Available The authors define parameters for isolation three-phase electric network to provide safety conditions for personnel working at open-operated coal deposits. The authors conclude the technique provides satisfactory accuracy of the parameters’ defining, as well as simplicity and safety of coal mining works with electric network having pressure up to 1000 Watt.

  10. Star Formation Activity of Barred Spiral Galaxies

    Science.gov (United States)

    Kim, Eunbin; Hwang, Ho Seong; Chung, Haeun; Lee, Gwang-Ho; Park, Changbom; Cervantes Sodi, Bernardo; Kim, Sungsoo S.

    2017-08-01

    We study the star formation activity of nearby galaxies with bars using a sample of late-type galaxies at 0.02≤slant z≤slant 0.05489 and {M}rmass and redshift distributions similar to barred galaxies. We find that the star formation activity of strongly barred galaxies probed by starburstiness, g-r, {NUV}-r, and mid-infrared [3.4]-[12] colors is, on average, lower than that of non-barred galaxies. However, weakly barred galaxies do not show such a difference between barred and non-barred galaxies. The amounts of atomic and molecular gas in strongly barred galaxies are smaller than those in non-barred galaxies, and the gas metallicity is higher in strongly barred galaxies than in non-barred galaxies. The gas properties of weakly barred galaxies again show no difference from those of non-barred galaxies. We stack the optical spectra of barred and non-barred galaxies in several mass bins and fit to the stacked spectra with a spectral fitting code, STARLIGHT. We find no significant difference in stellar populations between barred and non-barred galaxies for both strongly and weakly barred galaxies. Our results are consistent with the idea that the star formation activity of barred galaxies was enhanced in the past along with significant gas consumption, and is currently lower than or similar to that of non-barred galaxies. The past star formation enhancement depends on the strength of bars.

  11. Pleistocene barrier bar seaward of ooid shoal complex near Miami, Florida

    Science.gov (United States)

    Halley, Robert B.; Shinn, Eugene A.; Hudson, J. Harold; Lidz, Barbara H.

    1977-01-01

    An ooid sand barrier bar of Pleistocene age was deposited along the seaward side of an ooid shoal complex southwest of Miami, Florida. The bar is 35 km long, about 0.8 km wide, elongate parallel with the trend of the ooid shoal complex and perpendicular to channels between individual shoals. A depression 1.6 km wide, interpreted as a back-barrier channel, isolates the bar from the ooid shoals. During sea-level fall and subaerial exposure of the bar, the ooid sand was cemented in place, preventing migration of the barrier. No Holocene analogue of this sand body is recognized, perhaps because of the relative youthfulness of Holocene ooid shoals. This Pleistocene ooid shoal complex, with its reservoir-size barrier bar, may serve as a refined model for exploration in ancient ooid sand belts.

  12. Bars in Cuspy Dark Halos

    CERN Document Server

    Dubinski, John; Shlosman, Isaac

    2008-01-01

    We examine the bar instability in models with an exponential disk and a cuspy NFW-like dark matter (DM) halo inspired by cosmological simulations. Bar evolution is studied as a function of numerical resolution in a sequence of models spanning 10K to 100M DM particles - including a multi-mass model with an effective resolution of 10G. The goal is to find convergence in dynamical behaviour. We characterize the bar growth, the buckling instability, pattern speed decay through resonant transfer of angular momentum, and possible destruction of the DM halo cusp. Overall, most characteristics converge in behaviour in detail for halos containing more than 10M particles. Notably, the formation of the bar does not destroy the density cusp in this case. These higher resolution simulations clearly illustrate the importance of discrete resonances in transporting angular momentum from the bar to the halo.

  13. Galaxy Zoo: CANDELS Barred Disks and Bar Fractions

    CERN Document Server

    Simmons, B D; Lintott, Chris; Masters, Karen L; Willett, Kyle W; Keel, William C; Smethurst, R J; Cheung, Edmond; Nichol, Robert C; Schawinski, Kevin; Rutkowski, Michael; Kartaltepe, Jeyhan S; Bell, Eric F; Casteels, Kevin R V; Conselice, Christopher J; Almaini, Omar; Ferguson, Henry C; Fortson, Lucy; Hartley, William; Kocevski, Dale; Koekemoer, Anton M; McIntosh, Daniel H; Mortlock, Alice; Newman, Jeffrey A; Ownsworth, Jamie; Bamford, Steven; Dahlen, Tomas; Faber, Sandra M; Finkelstein, Steven L; Fontana, Adriano; Galametz, Audrey; Grogin, N A; Grutzbauch, Ruth; Guo, Yicheng; Haussler, Boris; Jek, Kian J; Kaviraj, Sugata; Lucas, Ray A; Peth, Michael; Salvato, Mara; Wiklind, Tommy; Wuyts, Stijn

    2014-01-01

    The formation of bars in disk galaxies is a tracer of the dynamical maturity of the population. Previous studies have found that the incidence of bars in disks decreases from the local Universe to z ~ 1, and by z > 1 simulations predict that bar features in dynamically mature disks should be extremely rare. Here we report the discovery of strong barred structures in massive disk galaxies at z ~ 1.5 in deep rest-frame optical images from CANDELS. From within a sample of 876 disk galaxies identified by visual classification in Galaxy Zoo, we identify 123 barred galaxies. Selecting a sub-sample within the same region of the evolving galaxy luminosity function (brighter than L*), we find that the bar fraction across the redshift range 0.5< z < 2 (f_bar = 10.7 +6.3 -3.5% after correcting for incompleteness) does not significantly evolve. We discuss the implications of this discovery in the context of existing simulations and our current understanding of the way disk galaxies have evolved over the last 11 bil...

  14. Bar Coliseo, en Sevilla

    Directory of Open Access Journals (Sweden)

    de la Peña Neila, Antonio

    1963-10-01

    Full Text Available This bar is situated inside the «Coliseo» building, which houses a cinema, as well as a number of commercial establishments. In order not to break the unity of the total project, no attempt has been made to alter the exterior aspect of the bar. No attempt was made, either, to make it into an intimate, club type of bar, now so much in fashion. Rather has it been given a diaphanous style, seeking the best possible use of the floor space. The windows of the building are elongated, and there is an intermediate floor level, whose detailed structure is metallic. A cleverly designed staircase, of folded sheet metal connects the ground floor, the intermediate floor level and the restaurant. Materials were carefully chosen in accordance with their function. The colour scheme has a sustained unity throughout the building, and care has been taken to avoid surprising or vivid chromatic patterns. Ceramic enamels by the painter Santiago del Campo provide a feature of decoration on the ground floor, and also serve to cover up the return air ducts. On the top floor, the restaurant is fitted with coloured tile facings, the work of the Seville painters Maria Josefa Sánchez, María Dolores Sánchez and Emilio García Ortiz. The bottom joints of the timber beams, in conjunction with the tile patterns, is reminiscent of the traditional Sevillian habit of placing ceramic units between the timber framework of buildings. The initial problem of the architect was to combine the optimum functional efficiency and aesthetic quality of the project, and the final solution is undoubtedly successful.El establecimiento está situado dentro del edificio «Coliseo», complejo formado por una sala de cine, y con la parte lateral destinada a locales comerciales. Formando un conjunto único no se pensó nunca en transformar los revestimientos y molduras de fachada. Tampoco presidió la idea de conseguir un establecimiento íntimo «tipo Club», tan en boga actualmente, sino un

  15. Sedimentological evolution of the Givetian-Eifelian (F3) sand bar of the West Alrar field, Illizi Basin, Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Chaouchi, R. [National Institute for Hydrocarbons and Chemistry, Boumerdes (Algeria); Malla, M.S.; Kechou, F. [Sonatrach, Algiers (Algeria). Exploration Div.

    1998-12-31

    Commercial accumulations of hydrocarbons depend on several factors, among which sedimentological conditions are of prime importance. Such sedimentatological factors are of particular importance in controlling both entrapment and reservoir quality in the western part of the Alrar field, within the F3 sandstone reservoir of Givetian-Eifelian age. Recent well results have shown facies and reservoir quality distribution to be more complex and generally more favourable than previously predicted. A series of tidally influenced litoral bars are now believed to have existed in the Alrar area at the time of deposition of the reservoir, these being elongated in a NW-SE direction in the West Alrar area, with an interbar area in the vicinity of well DZ-1. The highest reservoir quality is largely confined to this bar facies and understanding its distribution is therefore vital to locating development wells. (author)

  16. Repairing and strengthening a fractured Hader bar.

    Science.gov (United States)

    Herrero, D B

    1997-01-01

    Stresses from occlusion and metal fatigue over time can cause fracture of overdenture retention bars. Often failure of the bar necessitates the removal and remake of the bar. This may damage the abutment, especially if there are dowel posts involved. This article describes a method for reinforcing the existing bar without having to remove the bar or significantly alter the overdenture. The fractured bar can be prepared in the mouth to receive a reinforcing superstructure that will be cemented.

  17. Reservoir geochemistry. A reservoir engineering perspective

    Energy Technology Data Exchange (ETDEWEB)

    England, W.A. [BP Exploration, Chertsey Road, Sunbury-on-Thames, Middlesex, TW16 7LN (United Kingdom)

    2007-09-15

    This paper reviews the applications of reservoir geochemistry from a reservoir engineering point of view. Some of the main tasks of reservoir engineering are discussed with an emphasis on the importance of appraising reservoirs in the pre-development stage. A brief review of the principal methods and applications of reservoir geochemistry are given, in the context of applications to reservoir engineering problems. The importance of compositional differences in fluid samples from different depths or spatial locations is discussed in connection with the identification of internal flow barriers. The importance of understanding the magnitude and origin of vertical compositional gradients is emphasised because of possible confusion with purely lateral changes. The geochemical origin and rate of dissipation of compositional differences over geological time is discussed. Geochemical techniques suitable for bulk petroleum fluid samples include GC fingerprinting, GCMS, isotopic and PVT measurements. Core sample petroleum extracts may also be studied by standard geochemical methods but with the added complication of possible contamination by drilling mud. Aqueous phase residual salt extracts can be studied by strontium isotope analysis from core samples. Petroleum fluid inclusions allow the possibility of establishing the composition of paleo-accumulations. The problems in predicting flow barriers from geochemical measurements are discussed in terms of 'false positives' and 'false negatives'. Suggestions are made for areas that need further development in order to encourage the wider acceptance and application of reservoir geochemistry by the reservoir engineering community. The importance of integrating all available data is emphasised. Reservoir geochemistry may be applied to a range of practical engineering problems including production allocation, reservoir compartmentalisation, and the prediction of gravitational gradients. In this review

  18. Optimizing performance per watt on GPUs in High Performance Computing: temperature, frequency and voltage effects

    CERN Document Server

    Price, D C; Barsdell, B R; Babich, R; Greenhill, L J

    2014-01-01

    The magnitude of the real-time digital signal processing challenge attached to large radio astronomical antenna arrays motivates use of high performance computing (HPC) systems. The need for high power efficiency (performance per watt) at remote observatory sites parallels that in HPC broadly, where efficiency is an emerging critical metric. We investigate how the performance per watt of graphics processing units (GPUs) is affected by temperature, core clock frequency and voltage. Our results highlight how the underlying physical processes that govern transistor operation affect power efficiency. In particular, we show experimentally that GPU power consumption grows non-linearly with both temperature and supply voltage, as predicted by physical transistor models. We show lowering GPU supply voltage and increasing clock frequency while maintaining a low die temperature increases the power efficiency of an NVIDIA K20 GPU by up to 37-48% over default settings when running xGPU, a compute-bound code used in radio...

  19. Monolithic watt-level millimeter-wave diode-grid frequency tripler array

    Science.gov (United States)

    Hwu, R. J.; Luhmann, N. C., Jr.; Rutledge, D. B.; Hancock, B.; Lieneweg, U.

    1988-01-01

    In order to provide watt-level CW output power throughout the millimeter and submillimeter wave region, thousands of solid-state diodes have been monolithically integrated using a metal grid to produce a highly efficient frequency multiplier. Devices considered include GaAs Schottky diodes, thin MOS diodes, and GaAs Barrier-Intrinsic-N(+)diodes. The performance of the present compact low-cost device has been theoretically and experimentally validated.

  20. Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 2: Stress analysis

    Science.gov (United States)

    Miller, W. S.

    1974-01-01

    A structural analysis performed on the 1/4-watt cryogenic refrigerator. The analysis covered the complete assembly except for the cooling jacket and mounting brackets. Maximum stresses, margin of safety, and natural frequencies were calculated for structurally loaded refrigerator components shown in assembly drawings. The stress analysis indicates that the design is satisfactory for the specified vibration environment, and the proof, burst, and normal operating loads.

  1. Low-cost high-efficient 10-Watt X-band high-power amplifier

    NARCIS (Netherlands)

    Bent, G. van der; Hek, A.P. de; Bessemoulin, A.; Vliet, F.E. van

    2009-01-01

    A high power X-band amplifier with an output power over 10 Watts and a Power Added Efficiency (PAE) in excess of 40 percent has been developed. The design was fabricated in a 0.25 μm pHEMT GaAs process (WIN Semiconductor PP25-01). The small die area in combination with a 6-inch wafer technology prov

  2. A 20 GHz, 70 watt, 48 percent efficient space communications TWT

    Science.gov (United States)

    McDermott, M. A.; Tamashiro, R. N.

    A space qualifiable helix traveling wave tube capable of producing saturated output power levels above 70 watts at 48 percent total efficiency has been developed for 20 GHz satellite communications systems. The design approach stresses high reliability consistent with high power and efficiency. Advanced construction features incorporated into the design are a five stage collector, an M-type dispenser cathode, and a dynamic velocity tapered (DVT) helix.

  3. The distribution of the electric current in a watt-balance coil

    CERN Document Server

    Sasso, Carlo Paolo; Mana, Giovanni

    2013-01-01

    In the watt balance experiment, separate measurements of the Lorentz and electromotive forces in a coil in a radial magnetic field enable a virtual comparison between mechanical and electric powers to be carried out, which lead to an accurate measurement of the Planck constant. This paper investigates the effect of a spatially inhomogeneous distribution of the electric current in the coil due to the higher or lower resistance of the outer or inner paths.

  4. Towards ten-watt-level 3-5 µm Raman lasers using tellurite fiber.

    Science.gov (United States)

    Zhu, Gongwen; Geng, Lixiang; Zhu, Xiushan; Li, Li; Chen, Qian; Norwood, R A; Manzur, T; Peyghambarian, N

    2015-03-23

    Raman lasers based on mid-infrared fibers operating at 3-5 µm atmospheric transparency window are attractive sources for several applications. Compared to fluoride and chalcogenide fibers, tellurite fibers are more advantageous for high power Raman fiber laser sources at 3-5 µm because of their broader Raman gain bandwidth, much larger Raman shift and better physical and chemical properties. Here we report on our simulations for the development of 10-watt-level 3-5 µm Raman lasers using tellurite fibers as the nonlinear gain medium and readily available continuous-wave (cw) and Q-switched erbium-doped fluoride fiber lasers at 2.8 µm as the pump sources. Our results show that a watt-level or even ten-watt-level fiber laser source in the 3-5 µm atmospheric transparency window can be achieved by utilizing the 1st- and 2nd-order Raman scattering in the tellurite fiber. The presented numerical study provides valuable guidance for future 3-5 um Raman fiber laser development.

  5. An analytical algorithm for 3D magnetic field mapping of a watt balance magnet

    CERN Document Server

    Fu, Zhuang; Li, Zhengkun; Zhao, Wei; Han, Bing; Lu, Yunfeng; Li, Shisong

    2015-01-01

    A yoke-based permanent magnet, which has been employed in many watt balances at national metrology institutes, is supposed to generate strong and uniform magnetic field in an air gap in the radial direction. However, in reality the fringe effect due to the finite height of the air gap will introduce an undesired vertical magnetic component to the air gap, which should either be measured or modeled towards some optimizations of the watt balance. A recent publication, i.e., {\\it Metrologia} 52(4) 445 [1], presented a full field mapping method, which in theory will supply useful information for profile characterization and misalignment analysis. This article is an additional material of [1], which develops a different analytical algorithm to represent the 3D magnetic field of a watt balance magnet based on only one measurement for the radial magnetic flux density along the vertical direction, $B_r(z)$. The new algorithm is based on the electromagnetic nature of the magnet, which has a much better accuracy.

  6. Large reservoirs: Chapter 17

    Science.gov (United States)

    Miranda, Leandro E.; Bettoli, Phillip William

    2010-01-01

    Large impoundments, defined as those with surface area of 200 ha or greater, are relatively new aquatic ecosystems in the global landscape. They represent important economic and environmental resources that provide benefits such as flood control, hydropower generation, navigation, water supply, commercial and recreational fisheries, and various other recreational and esthetic values. Construction of large impoundments was initially driven by economic needs, and ecological consequences received little consideration. However, in recent decades environmental issues have come to the forefront. In the closing decades of the 20th century societal values began to shift, especially in the developed world. Society is no longer willing to accept environmental damage as an inevitable consequence of human development, and it is now recognized that continued environmental degradation is unsustainable. Consequently, construction of large reservoirs has virtually stopped in North America. Nevertheless, in other parts of the world construction of large reservoirs continues. The emergence of systematic reservoir management in the early 20th century was guided by concepts developed for natural lakes (Miranda 1996). However, we now recognize that reservoirs are different and that reservoirs are not independent aquatic systems inasmuch as they are connected to upstream rivers and streams, the downstream river, other reservoirs in the basin, and the watershed. Reservoir systems exhibit longitudinal patterns both within and among reservoirs. Reservoirs are typically arranged sequentially as elements of an interacting network, filter water collected throughout their watersheds, and form a mosaic of predictable patterns. Traditional approaches to fisheries management such as stocking, regulating harvest, and in-lake habitat management do not always produce desired effects in reservoirs. As a result, managers may expend resources with little benefit to either fish or fishing. Some locally

  7. Nanoporosity of Si (100) bars

    Science.gov (United States)

    Novikov, S. N.; Timoshenkov, S. P.; Minaev, V. S.; Goryunova, E. P.; Gerasimenko, N. N.; Smirnov, D. I.

    2016-09-01

    Si(100) samples cut from a typical bar (100 mm in diameter) prepared using industrial technology are studied. Measurements of the electron work function (EWF) show that the size effects in these samples (a reduction in thickness along with a sample's area and the EWF) detected earlier were due to nanostructure porosity that was buried by the technological treatment of a bar's surface. This hidden nanoporosity is assumed to be a manifestation of the secondary crystal structure.

  8. Triply heavy tetraquark states with the $QQ\\bar{Q}\\bar{q}$ configuration

    CERN Document Server

    Chen, Kan; Wu, Jing; Liu, Yan-Rui; Zhu, Shi-Lin

    2016-01-01

    In the framework of the color-magnetic interaction, we systematically investigate the mass splittings of the $QQ\\bar{Q}\\bar{q}$ tetraquark states and estimated their rough masses in this work. These systems include the explicitly exotic states $cc\\bar{b}\\bar{q}$ and $bb\\bar{c}\\bar{q}$ and the hidden exotic states $cc\\bar{c}\\bar{q}$, $cb\\bar{b}\\bar{q}$, $bc\\bar{c}\\bar{q}$, and $bb\\bar{b}\\bar{q}$. If a state around the estimated mass region could be observed, its nature as a genuine tetraquark is favored. The strong decay patterns shown here will be helpful to the experimental search for these exotic states.

  9. Bar Dissolution in Prolate Halos

    CERN Document Server

    Ideta, M; Ideta, Makoto; Hozumi, Shunsuke

    2000-01-01

    The time evolution of barred structures is examined under the influence of the external forces exerted by a spherical halo and by prolate halos. In particular, galaxy disks are placed in the plane including the major axis of prolate halos, whose configuration is often found in cosmological simulations. N-body disks in fixed external halo fields are simulated, so that bars are formed via dynamical instability. In the subsequent evolution, the bars in prolate halos dissolve gradually with time, while the bar pattern in a spherical halo remains almost unchanged to the end of the simulation. The decay times of the bars suggest that they can be destroyed in a time smaller than a Hubble time. Our results indicate that this dissolution process could occur in real barred galaxies, if they are surrounded by massive dark prolate halos, and the configuration adopted here is not unusual from the viewpoint of galaxy formation. For a prolate halo model, an additional simulation that is restricted to two-dimensional in-plan...

  10. Improved reservoir exploitation

    Energy Technology Data Exchange (ETDEWEB)

    Thomassen, P.R. [IKU Petroleumsforskning A/S, Trondheim (Norway)

    1996-12-31

    This paper deals with reservoir exploitation and it highlights some ideas on how to improve exploitive skills to optimise the recovery of a field. The author looks closer at what needs to be done to optimise the reservoir data and the exploitation tools, and what are the needs of the reservoir production management. 2 refs., 3 figs.

  11. Intermediate steps towards the 2000-Watt society in Switzerland: an energy-economic scenario analysis[Dissertation 17314

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, T. F

    2007-07-01

    In this dissertation by Thorsten Frank Schulz the intermediate steps necessary to realise the 2000-Watt Society in Switzerland are examined. An analysis of an energy-economic scenario shows that the 2000-Watt Society should be seen as a long-term goal. According to the author, the major changes required to allow the implementation of this project concern energy-transformation and energy-demand technologies. Electricity will, according to the author, play an important role in a service-oriented society in the future. In such a transformation even intermediate steps are associated with considerable expense. The aims of the 2000-Watt Society project are listed. Energy and CO{sub 2} balances for the domestic and transport sectors are presented and discussed. Complementary analyses are presented concerning fuel cells and wood-based fuel technologies. Finally, the implications of the 2000-Watt society and the effects of technological change are summarised and an outlook is presented.

  12. Field observations of nearshore bar formation

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian;

    2008-01-01

      The formation of an inner nearshore bar was observed during a high-energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics...

  13. Status of Wheeler Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    This is one in a series of status reports prepared by the Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overview of Wheeler Reservoir summarizes reservoir purposes and operation, reservoir and watershed characteristics, reservoir uses and use impairments, and water quality and aquatic biological conditions. The information presented here is from the most recent reports, publications, and original data available. If no recent data were available, historical data were summarized. If data were completely lacking, environmental professionals with special knowledge of the resource were interviewed. 12 refs., 2 figs.

  14. Status of Cherokee Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This is the first in a series of reports prepared by Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overviews of Cherokee Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports, publications, and data available, and interviews with water resource professionals in various Federal, state, and local agencies and in public and private water supply and wastewater treatment facilities. 11 refs., 4 figs., 1 tab.

  15. Status of Cherokee Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This is the first in a series of reports prepared by Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overviews of Cherokee Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports, publications, and data available, and interviews with water resource professionals in various Federal, state, and local agencies and in public and private water supply and wastewater treatment facilities. 11 refs., 4 figs., 1 tab.

  16. Effect of bars on the galaxy properties

    Science.gov (United States)

    Vera, Matias; Alonso, Sol; Coldwell, Georgina

    2016-10-01

    Aims: With the aim of assessing the effects of bars on disk galaxy properties, we present an analysis of different characteristics of spiral galaxies with strong bars, weak bars and without bars. Methods: We identified barred galaxies from the Sloan Digital Sky Survey (SDSS). By visual inspection of SDSS images we classified the face-on spiral galaxies brighter than glog (M∗/M⊙) processing, reflected in the significant changes in the physical properties of the host galaxies.

  17. Measurement of fast electrons spectra generated by interaction between solid target and peta watt laser

    Energy Technology Data Exchange (ETDEWEB)

    Tanimoto, T; Habara, H; Tanaka, K A; Kodama, R [Graduate School of Engineering, Osaka University, 2-6 Yamada-oka, Suita, Osaka 565-0871 (Japan); Nakatsutsumi, M [Laboratoire pour l' Utilisation des Laser Intenses (LULI), CNRS, Ecole Polytechnique, Route de Saclay, 91128 Palaiseau, Cedex F 91128 (France); Lancaster, K L; Green, J S; Scott, R H H; Sherlock, M; Norreys, P A [STFC Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0QX (United Kingdom); Evans, R G; Haines, M G [Department of Physics, Imperial College London, Blackett Laboratory, Prince Consort Road, London SW7 2BZ (United Kingdom); Kar, S; Zepf, M [Centre for Plasma Physics, School of Mathematics and Physics, Queens University Belfast, University Road, Belfast BT7 1NN (United Kingdom); King, J; Ma, T; Wei, M S; Yabuuchi, T; Beg, F N [Department of Mechanical and Aerospace Engineering, UC San Diego, 9500 Gillman Drive 0411, La Jolla, California 92093-0411, United States of America (United States); Key, M H, E-mail: tanimoto@ile.osaka-u.ac.j [Lawrence Livermore National Laboratory, PO Box 808, Livermore, California 94550, United States of America (United States)

    2010-08-01

    Fast electron energy spectra have been measured for a range of intensities between 10{sup 18} Wcm{sup -2} and 10{sup 21} Wcm{sup -2} and for different target materials using electron spectrometers. Several experimental campaigns were conducted on peta watt laser facilities at the Rutherford Appleton Laboratory and Osaka University. In these experimental campaigns, the pulse duration was varied from 0.5 ps to 5 ps. The laser incident angle was also changed from normal incidence to 40{sup 0} in p-polarized. The results show a reduction from the ponderomotive scaling on fast electrons over 10{sup 20} Wcm{sup -2}.

  18. Lumen Maintenance Testing of the Philips 60-Watt Replacement Lamp L Prize Entry

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Kelly L.; Hafen, Ryan P.; Hathaway, John E.; McCullough, Jeffrey J.

    2012-09-01

    This paper describes testing conducted to evaluate the Philips' L Prize award winning 60-watt LED replacement product's ability to meet the lifetime/lumen maintenance requirement of the competition, which was: "having 70 percent of the lumen value under subparagraph (A) [producing a luminous flux greater than 900 lumens] exceeding 25,000 hours under typical conditions expected in residential use." A custom test apparatus was designed and constructed for this testing and a statistical approach was developed for use in evaluating the test results. This will be the only publicly available, third-party data set of long-term LED product operation.

  19. Design of New Long-Distance Intelligent Watt-Hour Meter

    Institute of Scientific and Technical Information of China (English)

    Zhao Wenlei; Xue Yanbing

    2005-01-01

    The design scheme for a new kind of long-distance intelligent watt-hour meter is presented. In the system, the control computer communicates with the bank's host computer by the X. 25 network; the built-in embeded secure access module (FSAM) can verify data by commutation with the intelligent nodes that enhance the security of the data. IC TSS721 is adopted to collect data remotely,and the CPU IC card is used to ensure the the bargaining security and reliability. In addition, the software of the system is introduced.

  20. Chaos in complex motor networks induced byNewman-Watts small-world connections

    Institute of Scientific and Technical Information of China (English)

    WeiDu-Qu; Luo Xiao-Shu; Zhang Bo

    2011-01-01

    We investigate how dynamical behaviours of complex motor networks depend on the Newman-Watts small-world (NWSW) connections.Network elements are described by the permanent magnet synchronous motor (PMSM) with the values of parameters at which each individual PMSM is stable.It is found that with the increase of connection probability p,the motor in networks becomes periodic and falls into chaotic motion as p further increases.These phenomena imply that NWSW connections can induce and enhance chaos in motor networks.The possible mechanism behind the action of NWSW connections is addressed based on stability theory.

  1. Dynamics of a periodic Watt-type predator-prey system with impulsive effect

    Energy Technology Data Exchange (ETDEWEB)

    Wang Xiaoqin [Faculty of Science, Shaanxi University of Science and Technology, Xianyang, Shaanxi 712081 (China)], E-mail: wangxiaoqin@sust.edu.cn; Wang Weiming [School of Mathematics and Information Science, Wenzhou University, Wenzhou, Zhejiang 325035 (China)], E-mail: weimingwang2003@163.com; Lin Xiaolin [Faculty of Science, Shaanxi University of Science and Technology, Xianyang, Shaanxi 712081 (China)

    2009-02-15

    In this paper, an impulsive periodic predator-prey system with Watt-type functional response is investigated. By using the Floquet theory of linear periodic impulsive equation, the stability conditions for the prey-eradication positive periodic solution are given, and the boundedness of the system is proved. By the method of coincidence degree, the sufficient conditions for the existence of at least one strictly positive periodic solution are obtained. Furthermore, we give numerical analysis to confirm our theoretical results. It will be useful for ecosystem control.

  2. 3-D model of a radial flow sub-watt methanol fuel processor

    Energy Technology Data Exchange (ETDEWEB)

    Holladay, J. D.; Wang, Y.

    2015-10-01

    A 3-D model is presented for a novel sub-watt packed bed reactor. The reactor uses an annular inlet flow combined with a radial flow packed bed reactor. The baseline reactor is compared to a reactor with multiple outlets and a reactor with 3 internal fins. Increasing the outlets from 1 to 4 did improve the flow distribution, but did not increase the performance in the simulation. However, inserting fins allowed a decrease in temperature with same inlet flow of approximately 35K. Or the inlet flow rate could be increased by a factor of 2.8x while maintaining >99% conversion.

  3. Comment on 'Critical materials assessment program' (S. A. Smith and R. Watts, Battelle Memorial Institute)

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K.; Jackson, B.; Hermann, A.

    1986-01-15

    In the article ''Critical materials assessment program'' (1984) Smith and Watts examine the availability of indium for use in CuInSe/sub 2//CdS solar cells and conclude that indium's use should be ''decreased or eliminated''. Our response to this article is an update of the status of indium usage in CuInSe/sub 2/ cells. It will be shown that the use of indium is being significantly reduced and that pressures on the world indium supply can be minimal. Our conclusion is that the CdS/CuInSe/sub 2/ solar cell technology is viable, not limited by indium availability or cost.

  4. Synchronization of Coupled Oscillators on Newman-Watts Small-World Networks

    Institute of Scientific and Technical Information of China (English)

    GUAN Jian-Yue; XU Xin-Jian; WU Zhi-Xi; WANG Ying-Hai

    2006-01-01

    We investigate the collection behaviour of coupled phase oscillators on Newman- Watts small-world networks in one and two dimensions. Each component of the network is assumed as an oscillator and each interacts with the others following the Kuramoto model. We then study the onset of global synchronization of phases and frequencies based on dynamic simulations and finite-size scah'ng. Both the phase and frequency synchronization are observed to emerge in the presence of a tiny fraction of shortcuts and enhanced with the increases of nearest neighbours and lattice dimensions.

  5. Measurement of B0bar -> D(*)0 K(*)0bar Branching Fractions

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Pappagallo, M; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Best, D S; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Teodorescu, L; Blinov, V E; Bukin, A D; Buzykaev, A R; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, Yu K; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Del Re, D; Hadavand, H K; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Nogowski, R; Petzold, A; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Grenier, P; Latour, E; Thiebaux, C; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Gaillard, J R; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Chai, X; Charles, M J; Mader, W F; Mallik, U; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Petersen, T C; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Brown, C L; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Kelly, M P; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Willocq, S Y; Cowan, R; Koeneke, K; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Potter, C T; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Chauveau, J; David, P; Del Buono, L; La Vaissière, C de; Hamon, O; Hartfiel, B L; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Panetta, J; Biasini, M; Covarelli, R; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Di, E; Marco; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Mayer, B; Vasseur, G; Yéche, C; Zito, M; Park, W; Purohit, M V; Weidemann, A W; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Boyarski, A M; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Azzolini, V; Martínez-Vidal, F; Panvini, R S; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Flood, K T; Graham, M T; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mellado, B; Mihályi, A; Mohapatra, A K; Pan, Y; Pierini, M; Prepost, R; Tan, P; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We present a study of the decays B0bar --> D(*)0 K(*)0bar using a sample of 226 million Y(4S) --> B Bbar decays collected with the BaBar detector at the PEP-II asymmetric-energy e+e-collider at SLAC. We report evidence for the decay of B0 and B0bar mesons to the D*0 K0s final state with an average branching fraction BF(B0-tilde --> D*0 K0bar) := [ BF(B0bar --> D*0 K0bar) + BF(B0 --> D*0 K0) ]/2 = (3.6 +- 1.2 +- 0.3) x 10^-5. Similarly, we measure BF(B0-tilde --> D0 K0bar) := [ BF(B0bar --> D0 K0bar) + BF(B0 --> D0 K0) ]/2 = (5.3 +- 0.7 +- 0.3) x 10^-5 forthe D0 K0s final state. We measure BF(B0bar --> D0 K*0bar) =^(4.0 +- 0.7 +- 0.3) x 10^-5 and set a 90% confidence level upper limit BF(B0bar --> D0bar K*0bar) D0bar K*0bar)/A(B0bar --> D0 K*0bar)| to be less than 0.4 at the 90% confidence level.

  6. Jackson Bar Training Structure Study

    Science.gov (United States)

    2015-05-01

    Jackson, AL. Jackson Bar, a sand bar, is located on the left descending bank upstream of a railroad bridge. Located in a bend in the BWT at Jackson, AL...foot-pounds force 1.355818 joules gallons (U.S. liquid ) 3.785412 E-03 cubic meters inches 0.0254 meters miles (nautical) 1,852 meters miles (U.S...left descending bank southwest of Jackson, AL, and upstream of the Norfolk Southern railroad bridge (Figure 1). The railroad bridge is located in the

  7. Signaling behind bars: a role for bar domains

    NARCIS (Netherlands)

    de Kreuk, B.J.

    2012-01-01

    In this thesis we describe several novel components of growth factor receptor and RhoGTPase activation and signaling. We have demonstrated that the F-BAR protein PACSIN2 is an important regulator of Rac1 output and, as a consequence, cell spreading and migration. This study further established the i

  8. Transport of reservoir fines

    DEFF Research Database (Denmark)

    Yuan, Hao; Shapiro, Alexander; Stenby, Erling Halfdan

    Modeling transport of reservoir fines is of great importance for evaluating the damage of production wells and infectivity decline. The conventional methodology accounts for neither the formation heterogeneity around the wells nor the reservoir fines’ heterogeneity. We have developed an integral...... dispersion equation in modeling the transport and the deposition of reservoir fines. It successfully predicts the unsymmetrical concentration profiles and the hyperexponential deposition in experiments....

  9. Integrated reservoir interpretation

    Energy Technology Data Exchange (ETDEWEB)

    Caamano, Ed; Dickerman, Ken; Thornton, Mick (Conoco Indonesia Inc., Jakarta (Indonesia)); Corbett, Chip; Douglas, David; Schultz, Phil (GeoQuest, Houston, TX (United States)); Gir, Roopa; Nicholson, Barry (GeoQuest, Jakarta (Indonesia)); Martono, Dwi; Padmono, Joko; Novias; Kiagus; Suroso, Sigit (Pertamina Sumbagut, Brandan, North Sumatra (Indonesia)); Mathieu, Gilles (Etudes et Productions Schlumberger, Clamart (France)); Yan, Zhao (China National Petroleum Company, Beijing (China))

    1994-07-01

    Improved reservoir management often relies on linking a variety of application software that helps geoscientists handle, visualize and interpret massive amounts of diverse data. The goal is to obtain the best possible reservoir model so its behavior can be understood and optimized. But diverse application software creates specialty niches and discourages integrated interpretation. A description is given of a new reservoir management package that covers all required functionalities and encourages the geologist, geophysicist, petrophysicist and reservoir engineer to embrace the integrated approach. Case studies are included in the article. 21 figs., 13 refs.

  10. The watt balance: determination of the Planck constant and redefinition of the kilogram.

    Science.gov (United States)

    Stock, M

    2011-10-28

    Since 1889, the international prototype of the kilogram has served as the definition of the unit of mass in the International System of Units (SI). It is the last material artefact to define a base unit of the SI, and it influences several other base units. This situation is no longer acceptable in a time of ever-increasing measurement precision. It is therefore planned to redefine the unit of mass by fixing the numerical value of the Planck constant. At the same time three other base units, the ampere, the kelvin and the mole, will be redefined. As a first step, the kilogram redefinition requires a highly accurate determination of the Planck constant in the present SI system, with a relative uncertainty of the order of 1 part in 10(8). The most promising experiment for this purpose, and for the future realization of the kilogram, is the watt balance. It compares mechanical and electrical power and makes use of two macroscopic quantum effects, thus creating a relationship between a macroscopic mass and the Planck constant. In this paper, the operating principle of watt balance experiments is explained and the existing experiments are reviewed. An overview is given of all available experimental determinations of the Planck constant, and it is shown that further investigation is needed before the redefinition of the kilogram can take place. Independent of this requirement, a consensus has been reached on the form that future definitions of the SI base units will take.

  11. Effects of choline chloride on electrodeposited Ni coating from a Watts-type bath

    Science.gov (United States)

    Wang, Yurong; Yang, Caihong; He, Jiawei; Wang, Wenchang; Mitsuzak, Naotoshi; Chen, Zhidong

    2016-05-01

    Electrodeposition of bright nickel (Ni) was carried out in a Watts-type bath. Choline chloride (ChCl) was applied as a multifunctional additive and substitute for nickel chloride (NiCl2) in a Watts-type bath. The function of ChCl was investigated through conductivity tests, anodic polarization, and cathodic polarization experiments. The studies revealed that ChCl performed well as a conducting salt, anodic activator, and cathodic inhibitor. The effects of ChCl on deposition rate, preferred orientation, grain size, surface morphology, and microhardness of Ni coatings were also studied. The deposition rate reached a maximum value of greater than 27 μm h-1 when 20 g L-1 ChCl was introduced to the bath. Using X-ray diffraction, it was confirmed that progressive addition of ChCl promoted the preferred crystal orientation modification from (2 0 0) and (2 2 0) to (1 1 1), refined grain size, and enhanced microhardness. The presence of ChCl lowered the roughness of the coating.

  12. Microcombustor-thermoelectric power generator for 10-50 watt applications

    Science.gov (United States)

    Marshall, Daniel S.; Cho, Steve T.

    2010-04-01

    Fuel-based portable power systems, including combustion and fuel cell systems, take advantage of the 80x higher energy density of fuel over lithium battery technologies and offer the potential for much higher energy density power sources - especially for long-duration applications, such as unattended sensors. Miniaturization of fuel-based systems poses significant challenges, including processing of fuel in small channels, catalyst poisoning, and coke and soot formation. Recent advances in micro-miniature combustors in the 200Watt thermal range have enabled the development of small power sources that use the chemical energy of heavy fuel to drive thermal-to-electric converters for portable applications. CUBE Technology has developed compact Micro-Furnace combustors that efficiently deliver high-quality heat to optimized thermal-to-electric power converters, such as advanced thermoelectric power modules and Stirling motors, for portable power generation at the 10-50Watt scale. Key innovations include a compact gas-gas recuperator, innovative heavy fuel processing, coke- & soot-free operation, and combustor optimization for low balance-of-plant power use while operating at full throttle. This combustor enables the development of robust, high energy density, miniature power sources for portable applications.

  13. A five-watt G-M/J-T refrigerator for LHe target at BNL

    Science.gov (United States)

    Jia, L. X.; Wang, L.; Addessi, L.; Miglionico, G.; Martin, D.; Leskowicz, J.; McNeill, M.; Yatauro, B.; Tallerico, T.

    2002-05-01

    A five-watts G-M/J-T refrigerator was built and installed for the high-energy physics research at Brookhaven National Laboratory in 2001. A liquid helium target of 8.25 liters was required for an experiment in the proton beam line at the Alternating Gradient Synchrotron (AGS) of BNL. The large radiation heat load towards the target requires a five-watts refrigerator at 4.2 K to support a liquid helium flask of 0.2 meter in diameter and 0.3 meter in length, which is made of Mylar film of 0.35 mm in thickness. The liquid helium flask is thermally exposed to the vacuum windows that are also made of 0.35 mm thickness Mylar film at room temperature. The refrigerator uses a two-stage Gifford-McMahon cryocooler for precooling the Joule-Thomson circuit that consists of five Linde-type heat exchangers. A mass flow rate of 0.8˜1.0 grams per second at 17.7 atm is applied to the refrigerator cold box. The two-phase helium flows between the liquid target and liquid/gas separator by means of a thermosyphon. This paper presents the system design as well as the test results including the control of the thermal oscillation.

  14. Reconciling Planck constant determinations via watt balance and enriched-silicon measurements at NRC Canada

    Science.gov (United States)

    Steele, A. G.; Meija, J.; Sanchez, C. A.; Yang, L.; Wood, B. M.; Sturgeon, R. E.; Mester, Z.; Inglis, A. D.

    2012-02-01

    The next revision to the International System of Units will emphasize the relationship between the base units (kilogram, metre, second, ampere, kelvin, candela and mole) and fundamental constants of nature (the speed of light, c, the Planck constant, h, the elementary charge, e, the Boltzmann constant, kB, the Avogadro constant, NA, etc). The redefinition cannot proceed without consistency between two complementary metrological approaches to measuring h: a 'physics' approach, using watt balances and the equivalence principle between electrical and mechanical force, and a 'chemistry' approach that can be viewed as determining the mass of a single atom of silicon. We report the first high precision physics and chemistry results that agree within 12 parts per billion: h (watt balance) = 6.626 070 63(43) × 10-34 J s and h(silicon) = 6.626 070 55(21) × 10-34 J s. When combined with values determined by other metrology laboratories, this work helps to constrain our knowledge of h to 20 parts per billion, moving us closer to a redefinition of the metric system used around the world.

  15. Field representation of a watt balance magnet by partial profile measurements

    CERN Document Server

    Li, Shisong; Zhao, Wei; Huang, Songling

    2015-01-01

    Permanent magnets with high-permeability yokes have been widely used in watt balances for supplying a robust and strong magnetic field at the coil position. Subjected to the mechanical realization, only several $B_r(z)$ (radial magnetic field along the vertical direction) profiles can be measured by coils for field characterization. In this article, we present an algorithm that can construct the global magnetic field of the air gap based on $N(N\\geq1)$ additional measurements of $B_r(z)$ profiles. The proposed algorithm is realized by polynomially estimating the $B_z(r)$ function with analysis of basic relations between two magnetic components in air gap, i.e., $B_r(r,z)$ and $B_z(r,z)$, following the Maxwell's equations. The algorithm, verified by FEM simulations, can characterize the three-dimensional contribution of the magnetic field for a watt balance magnet with acceptable accuracy, which would supply basic field parameters for alignment and misalignment corrections.

  16. Feasibility study of a 110 watt per kilogram lightweight solar array system

    Science.gov (United States)

    Shepard, N. F.; Stahle, C. V.; Schneider, A.; Hanson, K. L.

    1972-01-01

    An investigation of the feasibility of a solar array panel subsystem which will produce 10,000 watts of electrical output at 1 A.U. with an overall beginning-of-life power-to-weight ratio of at least 110 watt/kg is reported. A description of the current baseline configuration which meets these requirements is presented. A parametric analysis of the single boom, two blanket planar solar array system was performed to arrive at the optimum system aspect ratio. A novel concept for the stiffening of a lightweight solar array by canting the solar cell blankets at a small angle to take advantage of the inherent in-plane stiffness to increase the symmetric out-of-plane frequency is introduced along with a preliminary analysis of the stiffening effect. A comparison of welded and soldered solar cell interconnections leads to the conclusion that welding is required on this ultralightweight solar array. The use of a boron/aluminum composite material in a BI-STEM type deployable boom is investigated as a possible advancement in the state-of-the-art.

  17. Bars in the Barkor Street

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In daytime,the Barkor Street is bustling with tourists,pious pilgrims and merchants crowded together.Only when darkness falls does the street become tranquil.Nevertheless,the area surrounding the Barkor Street(from Tibetan Hospital compound extending to east Beijing Road)is then revived by various kinds of bars.

  18. Galaxy Zoo: Observing Secular Evolution Through Bars

    CERN Document Server

    Cheung, Edmond; Masters, Karen L; Nichol, Robert C; Bosma, A; Bell, Eric F; Faber, S M; Koo, David C; Lintott, Chris; Melvin, Thomas; Schawinski, Kevin; Skibba, Ramin A; Willett, Kyle W

    2013-01-01

    Observations have shown that there is a connection between the presence of a bar and the properties of a galaxy. In a parallel effort, simulations have shown that this connection is consistent with the theory of bar-driven secular evolution. But observational evidence of bar-driven secular evolution has been sparse. In this paper, we use the Galaxy Zoo 2 dataset to look for evidence of this secular evolution. Our sample consists of 13,295 disk galaxies, with an overall bar fraction of 23.6 +/- 0.4%, of which 1,154 barred galaxies also have bar length measurements. These samples are the largest ever used to study the role of bars in disk galaxy evolution. We characterize bars by the bar likelihood, the likelihood a bar is present in a given galaxy, and the bar length. These two bar properties show interesting correlations with the specific star formation rate and the inner central structure of galaxies. Comparing these observations to state-of-the-art simulations of bar evolution, which include live halos and ...

  19. Going Smokefree Matters - Bars and Restaurants Infographic

    Data.gov (United States)

    U.S. Department of Health & Human Services — Explore the Going Smokefree Matters – Bars and Restaurants Infographic which outlines key facts related to the effects of secondhand smoke exposure in bars and...

  20. Reservoir Engineering Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Howard, J.H.; Schwarz, W.J.

    1977-12-14

    The Reservoir Engineering Management Program being conducted at Lawrence Berkeley Laboratory includes two major tasks: 1) the continuation of support to geothermal reservoir engineering related work, started under the NSF-RANN program and transferred to ERDA at the time of its formation; 2) the development and subsequent implementation of a broad plan for support of research in topics related to the exploitation of geothermal reservoirs. This plan is now known as the GREMP plan. Both the NSF-RANN legacies and GREMP are in direct support of the DOE/DGE mission in general and the goals of the Resource and Technology/Resource Exploitation and Assessment Branch in particular. These goals are to determine the magnitude and distribution of geothermal resources and reduce risk in their exploitation through improved understanding of generically different reservoir types. These goals are to be accomplished by: 1) the creation of a large data base about geothermal reservoirs, 2) improved tools and methods for gathering data on geothermal reservoirs, and 3) modeling of reservoirs and utilization options. The NSF legacies are more research and training oriented, and the GREMP is geared primarily to the practical development of the geothermal reservoirs. 2 tabs., 3 figs.

  1. Dynamic reservoir well interaction

    NARCIS (Netherlands)

    Sturm, W.L.; Belfroid, S.P.C.; Wolfswinkel, O. van; Peters, M.C.A.M.; Verhelst, F.J.P.C.M.

    2004-01-01

    In order to develop smart well control systems for unstable oil wells, realistic modeling of the dynamics of the well is essential. Most dynamic well models use a semi-steady state inflow model to describe the inflow of oil and gas from the reservoir. On the other hand, reservoir models use steady s

  2. A LEGO Watt Balance: An apparatus to demonstrate the definition of mass based on the new SI

    CERN Document Server

    Chao, L S; Newell, D B; Pratt, J R; Sineriz, G; Seifert, F; Cao, A; Haddad, D; Zhang, X

    2014-01-01

    A global effort to redefine our International System of Units (SI) is underway and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. More specifically, the unit of mass, the kilogram, will be realized through a fixed value of the Planck constant $h$. For instance, a watt balance can be used to realize the kilogram unit of mass within a few parts in $10^8$. Such a balance has been designed and constructed at the National Institute of Standards and Technology. For educational outreach and to demonstrate the principle, we have constructed a LEGO tabletop watt balance capable of measuring a gram size mass to 1 % relative uncertainty. This article presents the design, construction, and performance of the LEGO watt balance and its ability to determine $h$

  3. Microbial Life in an Underground Gas Storage Reservoir

    Science.gov (United States)

    Bombach, Petra; van Almsick, Tobias; Richnow, Hans H.; Zenner, Matthias; Krüger, Martin

    2015-04-01

    While underground gas storage is technically well established for decades, the presence and activity of microorganisms in underground gas reservoirs have still hardly been explored today. Microbial life in underground gas reservoirs is controlled by moderate to high temperatures, elevated pressures, the availability of essential inorganic nutrients, and the availability of appropriate chemical energy sources. Microbial activity may affect the geochemical conditions and the gas composition in an underground reservoir by selective removal of anorganic and organic components from the stored gas and the formation water as well as by generation of metabolic products. From an economic point of view, microbial activities can lead to a loss of stored gas accompanied by a pressure decline in the reservoir, damage of technical equipment by biocorrosion, clogging processes through precipitates and biomass accumulation, and reservoir souring due to a deterioration of the gas quality. We present here results from molecular and cultivation-based methods to characterize microbial communities inhabiting a porous rock gas storage reservoir located in Southern Germany. Four reservoir water samples were obtained from three different geological horizons characterized by an ambient reservoir temperature of about 45 °C and an ambient reservoir pressure of about 92 bar at the time of sampling. A complementary water sample was taken at a water production well completed in a respective horizon but located outside the gas storage reservoir. Microbial community analysis by Illumina Sequencing of bacterial and archaeal 16S rRNA genes indicated the presence of phylogenetically diverse microbial communities of high compositional heterogeneity. In three out of four samples originating from the reservoir, the majority of bacterial sequences affiliated with members of the genera Eubacterium, Acetobacterium and Sporobacterium within Clostridiales, known for their fermenting capabilities. In

  4. Geothermal reservoir engineering research

    Science.gov (United States)

    Ramey, H. J., Jr.; Kruger, P.; Brigham, W. E.; London, A. L.

    1974-01-01

    The Stanford University research program on the study of stimulation and reservoir engineering of geothermal resources commenced as an interdisciplinary program in September, 1972. The broad objectives of this program have been: (1) the development of experimental and computational data to evaluate the optimum performance of fracture-stimulated geothermal reservoirs; (2) the development of a geothermal reservoir model to evaluate important thermophysical, hydrodynamic, and chemical parameters based on fluid-energy-volume balances as part of standard reservoir engineering practice; and (3) the construction of a laboratory model of an explosion-produced chimney to obtain experimental data on the processes of in-place boiling, moving flash fronts, and two-phase flow in porous and fractured hydrothermal reservoirs.

  5. Modeling vapor dominated geothermal reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Marconcini, R.; McEdwards, D.; Neri, G.; Ruffilli, C.; Schroeder, R.; Weres, O.; Witherspoon, P.

    1977-09-12

    The unresolved questions with regard to vapor-dominated reservoir production and longevity are reviewed. The simulation of reservoir behavior and the LBL computer program are discussed. The geology of Serrazzano geothermal field and its reservoir simulation are described. (MHR)

  6. While in Shanghai,Enjoy Unigue Bars!

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Today, bars are nothingnew for people who live inmajor cities. Bars have becomeso common that they have toseek a revolution for survival.It seems the only way tosurvive the fierce market competitionis to take the lead in being special. Asa result, some bars are attractingcustomers with unique features.Among them are:

  7. Development Of Multi-users Multi-function Watt-hour Meter Based On ATT7022B

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>According to the feature of city’s apartment building in China,a kind of Multi-users Watt-hour Meter based on ATT7022B has been developed in this paper.The master-slave MCU control model and the principles of Time Sharing Multiplex are adopted in this Watt-hour Meter,its function includes the measurement of current, voltage,power,power factor and the overload protection.It supports remote reading,pre-payment,multi-rate and etc. The practice shows that this meter has high accuracy,runs stable.It has wide prospect in the future market.

  8. Systems interaction results from the digraph matrix analysis of the Watts Bar Nuclear Power Plant high pressure safety injection systems. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Alesso, H.P.

    1983-07-01

    Spatial and functional coupling (including human actions) of nuclear power plant systems that lead to interdependencies are called Systems Interactions. At present, the US Nuclear Regulatory Commission (NRC) is investigating ways of integrating a systems interactions study with existing Probabilistic Risk Assessment efforts. One approach is based on graph-theoretic methods utilizing matrix representations of logic diagrams called Digraph Matrix Analysis (DMA). The objective in this report is to demonstrate the capabilities of Digraph Matrix Analysis to model an accident sequence (including front-line systems, support systems and human actions) as a continuous, well-integrated logic model in order to identify and evaluate functional systems interactions. The selected accident sequence, loss of high pressure safety injection during a LOCA, was modeled and qualitative and quantitative comparisons were made to the Reactor Safety Study (WASH 1400) and other studies.

  9. Systems interaction results from the digraph matrix analysis of the Watts Bar Nuclear Power Plant high pressure safety injection systems. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Alesso, H.P.

    1983-07-01

    Spatial and functional coupling of nuclear power plant systems that lead to interdependencies are called Systems Interactions. At present, the US Nuclear Regulatory Commission (NRC) is investigating ways of integrating a systems interactions study with existing Probabilistic Risk Assessment efforts. One approach is based on graph-theoretic methods utilizing matrix representations of logic diagrams called Digraph Matrix Analysis (DMA). The objective in this report is to demonstrate the capabilities of Digraph Matrix Analysis to model an accident sequence (including front line systems, support systems and human actions) as a continuous, well-integrated logic model in order to identify and evaluate functional systems interactions. The selected accident sequence, loss of high pressure safety injection during an S1 LOCA, was modeled and qualitative and quantitative comparisons were made to WASH 1400 aand other studies.

  10. TEEPEE DINING & BAR -TELTTARAVINTOLAN PERUSTAMINEN

    OpenAIRE

    Meronen, Pirita

    2015-01-01

    Opinnäytetyönä tein manuaalin Teepee Dining & Bar -telttaravintolan perustamisesta Suomen Teemaravintolat Oy:lle. Seurasin toimeksiantajani etenemistä ravintolan perustamisprosessissa ja raportoin kaikki ravintolan perustamiseen liittyvät vaiheet manuaaliin. Lisäksi kirjasin manuaaliin kaikki tarvittavat yhteyshenkilöt ja luvat, joita tarvitaan ravintolatoiminnan aloittamiseen. Aloitin opinnäytetyöni pohjatyön tiedon keräämisellä ja haastattelin toimeksiantajaani sekä tutustuin ravintola...

  11. Torsional Split Hopkinson Bar Optimization

    Science.gov (United States)

    2012-04-10

    pillow blocks used to mount the incident and transmitter bars are cast iron based- mounted Babbitt -lined bearing split, for 1 in. shaft diameter...Total 1 McMaster-CARR 5911k16 1" Dia, 6" long anodized aluminum shaft $15.38 8 $123.04 2 McMaster-CARR 6359k37 Cast iron base-mounted babbitt

  12. Characterization of dynamic change of Fan-delta reservoir properties in water-drive development

    Energy Technology Data Exchange (ETDEWEB)

    Wu Shenghe; Xiong Qihua; Liu Yuhong [Univ. of Petroleum Changping, Beijing (China)

    1997-08-01

    Fan-delta reservoir in Huzhuangji oil field of east China, is a typical highly heterogeneous reservoir. The oil field has been developed by water-drive for 10 years, but the oil recovery is less than 12%, and water cut is over 90%, resulting from high heterogeneity and serious dynamic change of reservoir properties. This paper aims at the study of dynamic change of reservoir properties in water-drive development. Through quantitative imaging analysis and mercury injection analysis of cores from inspection wells, the dynamic change of reservoir pore structure in water-drive development was studied. The results show that the {open_quotes}large pore channels{close_quotes} develop in distributary channel sandstone and become larger in water-drive development, resulting in more serious pore heterogeneity. Through reservoir sensitivity experiments, the rock-fluid reaction in water-drive development is studied. The results show the permeability of some distal bar sandstone and deserted channel sandstone becomes lower due to swelling of I/S clay minerals in pore throats. OD the other hand, the permeability of distributary channel and mouth bar sandstone become larger because the authigenic Koalinites in pore throats are flushed away with the increase of flow rate of injection water. Well-logging analysis of flooded reservoirs are used to study the dynamic change of reservoir properties in various flow units. The distribution of remaining oil is closely related to the types and distribution of flow units.

  13. How James Watt invented the copier forgotten inventions of our great scientists

    CERN Document Server

    Schils, René

    2012-01-01

    Features 25 different scientists and the ideas which may not have made them famous, but made history… Typically, we remember our greatest scientists from one single invention, one new formula or one incredible breakthrough. This narrow perspective does not give justice to the versatility of many scientists who also earned a reputation in other areas of science. James Watt, for instance, is known for inventing the steam engine, yet most people do not know that he also invented the copier. Alexander Graham Bell of course invented the telephone, but only few know that he invented artificial breathing equipment, a prototype of the ‘iron lung’. Edmond Halley, whose name is associated with the comet that visits Earth every 75 years, produced the first mortality tables, used for life insurances. This entertaining book is aimed at anyone who enjoys reading about inventions and discoveries by the most creative minds. Detailed illustrations of the forgotten designs and ideas enrich the work throughout.

  14. Evolutionary Games on Weighted Newman-Watts Small-World Networks

    Institute of Scientific and Technical Information of China (English)

    DU Wen-Bo; CAO Xian-Bin; ZHAO Lin; ZHOU Hong

    2009-01-01

    We investigate the evolutionary prisoner's dilemma game (PDG) on weighted Newman-Watts (NW) networks. In weighted NW networks, the link weight wij is assigned to the link between the nodes i and j as: wij = (ki · kj)β,where ki(kj) is the degree of node i(j) and β represents the strength of the correlations. Obviously, the link weight can be tuned by only one parameter β. We focus on the cooperative behavior and wealth distribution in the system. Simulation results show that the cooperator frequency is promoted by a large range of β and there is a minimal cooperation frequency around β = - 1. Moreover, we also employ the Gini coefficient to study the wealth distribution in the population. Numerical results show that the Gini coefficient reaches its minimum when β≈ -1. Our work may be helpful in understanding the emergence of cooperation and unequal wealth distribution in society.

  15. Hundred-Watt-Level, All-Fiber-Integrated Supercontinuum Generation from Photonic Crystal Fiber

    Science.gov (United States)

    Chen, Hongwei; Chen, Zilun; Chen, Shengping; Hou, Jing; Lu, Qisheng

    2013-03-01

    A photonic crystal fiber (PCF) based supercontinuum source with hundred-watt-level average power output is presented in this paper. The output delivery fiber of a 120 W picosecond master-oscillator power-amplifier (MOPA) laser with a 15 µm fiber core is directly spliced with a 2.6-m-long PCF to form the all-fiber-integrated SC source. Using the controlled air-hole collapse technique to expand the core diameter of the PCF, a super-low splice loss (˜0.2 dB) between the delivery fiber and the PCF has been demonstrated. A 92.5 W SC spanning from about 700 nm to beyond 1700 nm is obtained.

  16. Design of a 300-Watt Isolated Power Supply for Ultra-Fast Tracking Converters

    DEFF Research Database (Denmark)

    Nguyen-Duy, Khiem; Ouyang, Ziwei; Petersen, Lars Press;

    2015-01-01

    that an overall circuit input-to-output parasitic capacitance of 10 pF in a 300 W prototype can be achieved. The circuit input-to-output capacitance per watt is therefore 30 times lower than that of existing approaches. A mathematical model of the inter-winding capacitance of the proposed transformer, circuit......This paper presents the design of a medium-powerrating isolated power supply for ultra-fast tracking converters and MOS-gate driver circuits in medium and high voltage applications. The key feature of the design is its very low circuit input-to-output parasitic capacitance, which maximizes its...... noise immunity from noise due to fast changes in voltage. The converter is a voltage-controlled current source, utilizing a transformer with extremely low inter-winding parasitic capacitance, which is achieved by separating the windings by a significant distance. Experimental measurements show...

  17. Autaptic self-feedback-induced synchronization transitions in Newman-Watts neuronal network with time delays

    Science.gov (United States)

    Wang, Qi; Gong, Yubing; Wu, Yanan

    2015-04-01

    Autapse is a special synapse that connects a neuron to itself. In this work, we numerically study the effect of chemical autapse on the synchronization of Newman-Watts Hodgkin-Huxley neuron network with time delays. It is found that the neurons exhibit synchronization transitions as autaptic self-feedback delay is varied, and the phenomenon enhances when autaptic self-feedback strength increases. Moreover, this phenomenon becomes strongest when network time delay or coupling strength is optimal. It is also found that the synchronization transitions by network time delay can be enhanced by autaptic activity and become strongest when autaptic delay is optimal. These results show that autaptic delayed self-feedback activity can intermittently enhance and reduce the synchronization of the neuronal network and hence plays an important role in regulating the synchronization of the neurons. These findings could find potential implications for the information processing and transmission in neural systems.

  18. Autaptic activity-induced synchronization transitions in Newman-Watts network of Hodgkin-Huxley neurons

    Science.gov (United States)

    Wu, Yanan; Gong, Yubing; Wang, Qi

    2015-04-01

    In this paper, we numerically study the effect of autapse on the synchronization of Newman-Watts small-world Hodgkin-Huxley neuron network. It is found that the neurons exhibit synchronization transitions as autaptic self-feedback delay is varied, and the phenomenon becomes strongest when autaptic self-feedback strength is optimal. This phenomenon also changes with the change of coupling strength and network randomness and become strongest when they are optimal. There are similar synchronization transitions for electrical and chemical autapse, but the synchronization transitions for chemical autapse occur more frequently and are stronger than those for electrical synapse. The underlying mechanisms are briefly discussed in quality. These results show that autaptic activity plays a subtle role in the synchronization of the neuronal network. These findings may find potential implications of autapse for the information processing and transmission in neural systems.

  19. First Passage Percolation on the Newman-Watts Small World Model

    Science.gov (United States)

    Komjáthy, Júlia; Vadon, Viktória

    2016-02-01

    The Newman-Watts model is given by taking a cycle graph of n vertices and then adding each possible edge (i,j), |i-j|≠ 1 mod n with probability ρ /n for some ρ >0 constant. In this paper we add i.i.d. exponential edge weights to this graph, and investigate typical distances in the corresponding random metric space given by the least weight paths between vertices. We show that typical distances grow as 1/λ log n for a λ >0 and determine the distribution of smaller order terms in terms of limits of branching process random variables. We prove that the number of edges along the shortest weight path follows a Central Limit Theorem, and show that in a corresponding epidemic spread model the fraction of infected vertices follows a deterministic curve with a random shift.

  20. Effect of bars on the galaxy properties

    CERN Document Server

    Vera, Matias; Coldwell, Georgina

    2016-01-01

    Aims: With the aim of assessing the effects of bars on disc galaxy properties, we present an analysis of different characteristics of spiral galaxies with strong, weak and without bars. Method: We identified barred galaxies from the Sloan Digital Sky Survey. By visual inspection, we classified the face-on spiral galaxies brighter than g<16.5 mag into strong-bar, weak-bar and unbarred. In order to provide an appropiate quantification of the influence of bars on galaxy properties, we also constructed a suitable control sample of unbarred galaxies with similar redshift, magnitude, morphology, bulge sizes, and local density environment distributions to that of barred galaxies. Results: We found 522 strong-barred and 770 weak-barred galaxies, representing a 25.82% of the full sample of spiral galaxies, in good agreement with previous studies. We also found that strong-barred galaxies show less efficient star formation activity and older stellar populations compared to weak-barred and unbarred spirals from the c...

  1. New Constraints on the Galactic Bar

    CERN Document Server

    Minchev, I; Quillen, A C

    2007-01-01

    Previous work has related the Galactic Bar to structure in the local stellar velocity distribution. Here we show that the Bar also influences the spatial gradients of the velocity vector via the Oort constants. By numerical integration of test-particles we simulate measurements of the Oort C value in a gravitational potential including the Galactic Bar. We account for the observed trend that C is increasingly negative for stars with higher velocity dispersion. By comparing measurements of C with our simulations we improve on previous models of the Bar, estimating that the Bar pattern speed is Omega_b/Omega_0=1.87\\pm0.04, where Omega_0 is the local circular frequency, and the Bar angle lies within 20Bar affects measurements of the Oort constants A and B less than ~2 km/s/kpc for the hot stars.

  2. Reservoir characterization of Pennsylvanian sandstone reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1995-02-01

    This final report summarizes the progress during the three years of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description; (ii) scale-up procedures; (iii) outcrop investigation. The first section describes the methods by which a reservoir can be described in three dimensions. The next step in reservoir description is to scale up reservoir properties for flow simulation. The second section addresses the issue of scale-up of reservoir properties once the spatial descriptions of properties are created. The last section describes the investigation of an outcrop.

  3. Watt loss in three-phase transformers with circular and hexagonal forming contours of twisted spatial magnetic core rods

    Directory of Open Access Journals (Sweden)

    E.A. Avdieieva

    2014-04-01

    Full Text Available For spatial three-phase axial electromagnetic systems with circular and hexagonal cross-section configurations of twisted butt-end magnetic core rods, analytical dependences for optimal geometrical relations determination over the transformer minimum watt loss criterion are obtained, comparative analysis of the systems energy efficiency made.

  4. 75 FR 80731 - Request for Exclusion of 120 Volt, 100 Watt R20 Short Incandescent Reflector Lamps

    Science.gov (United States)

    2010-12-23

    ... of energy conservation standards for incandescent reflector lamps a 120 volt, 100 watt R20 short lamp....gov . SUPPLEMENTARY INFORMATION: The Administrative Procedure Act (APA), 5 U.S.C. 551 et seq... APA, NEMA petitioned the Department of Energy for the issuance of a new rule, as set forth below....

  5. Design of a 300-Watt Isolated Power Supply with Minimized Circuit Input-to-Output Parasitic Capacitance

    DEFF Research Database (Denmark)

    Nguyen-Duy, Khiem; Petersen, Lars Press; Knott, Arnold;

    2014-01-01

    This paper presents the design of a 300-Watt isolated power supply for MOS gate driver circuit in medium and high voltage applications. The key feature of the developed power supply is having a very low circuit input-to-output parasitic capacitance, thus maximizing its noise immunity. This makes ...

  6. A compact broadband high efficient X-band 9-watt PHEMT MMIC high-power amplifier for phased array radar applications

    NARCIS (Netherlands)

    Hek, A.P. de; Hunneman, P.A.H.; Demmler, M.; Hulsmann, A.

    1999-01-01

    ln this paper the development and measurement results of a compact broadband 9-Watt high efficient X-band high-power amplifier are discussed. The described amplifier has the following state-of-the art performance: an average ouput power of 9 Watt, a gain of 20 dB and an average Power Added

  7. A compact broadband high efficient X-band 9-watt PHEMT MMIC high-power amplifier for phased array radar applications

    NARCIS (Netherlands)

    Hek, A.P. de; Hunneman, P.A.H.; Demmler, M.; Hulsmann, A.

    1999-01-01

    ln this paper the development and measurement results of a compact broadband 9-Watt high efficient X-band high-power amplifier are discussed. The described amplifier has the following state-of-the art performance: an average ouput power of 9 Watt, a gain of 20 dB and an average Power Added Efficienc

  8. [Nutritional characteristics of cereal and peanut bars].

    Science.gov (United States)

    Escobar, B; Estévez, A M; Tepper, A; Aguayo, M

    1998-06-01

    Snack with good nutritional value could play an important role in the physical and mental development of children and teenagers since they show a great preference for them. The tendency is increasing their nutritional value by supplying proteins, carbohydrates, fiber, vitamins and minerals in a balanced form. The purpose of this research was to evaluate the chemical, sensorial and nutritional quality of cereal and peanut bars. Three types of bars using different ratios of oat, wheat germ, peanut, toasted and expanded amaranthus and wheat extrudate were prepared. Bars proximate composition was determined according the AOAC methods, and their acceptability according Hedonic Scale. In the biological assays, rats fed with 10% protein diets, were used to obtain the Protein Efficiency Ratio (PER) Net Protein Ratio (NPR) and Apparent Digestibility (AD). Corrected PER, relative PER, relative AD, PER and NPR values did not showed difference between bars CM1 and CM2 (PER: 2.59-2.57; NPR: 3.99-3.95 respectively); CM3 bar showed a lower quality. There were not differences among bars in relation to AD. CM1 and CM2 bars had a better biological quality of the protein being CM3 bar of lower quality. From a chemical and sensorial point of view CM1 bar shows the highest protein content (14.23%) and acceptability (6.8) and CM2 bar shows a high raw fiber content (2.27%).

  9. Measurement of $\\pi^{+/-}, K^{+/-}, p$ and $\\bar{p}$ production in $Z^0 \\to q\\bar{q}, Z^{0} \\to b\\bar{b}$ and $Z^{0} \\to u\\bar{u}, d\\bar{d}, s\\bar{s}$ (Particle Identification with the DELPHI Barrel Ring Imaging Cherenkov Counter)

    CERN Document Server

    Schyns, Emile

    1997-01-01

    Measurement of $\\pi^{+/-}, K^{+/-}, p$ and $\\bar{p}$ production in $Z^0 \\to q\\bar{q}, Z^{0} \\to b\\bar{b}$ and $Z^{0} \\to u\\bar{u}, d\\bar{d}, s\\bar{s}$ (Particle Identification with the DELPHI Barrel Ring Imaging Cherenkov Counter)

  10. BaBar Data Aquisition

    CERN Document Server

    Scott, I; Grosso, P; Hamilton, R T; Huffer, M E; O'Grady, C; Russell, J J

    1998-01-01

    The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by analysing the decays of a very large sample of B and Bbar mesons produced at the high luminosity PEP-11 accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detector subsystems. Data from the front end electronics is read into commercial VME processors via a custom "personality card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data are read out via a non-blocking network switch to a farm of commercial UNIX processors. Careful design of the core data acquisition code has enabled us to sustain events rates in excess of 20 kHz while maintaini...

  11. The Carnegie-Irvine Galaxy Survey. V. Statistical Study of Bars and Buckled Bars

    Science.gov (United States)

    Li, Zhao-Yu; Ho, Luis C.; Barth, Aaron J.

    2017-08-01

    Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle (i), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high i) or as a barlens structure (at low i). We visually identify bars, boxy/peanut-shaped bulges, and barlenses, and examine the dependence of bar and buckled bar fractions on host galaxy properties, including Hubble type, stellar mass, color, and gas mass fraction. We find that the barred and unbarred disks show similar distributions in these physical parameters. The bar fraction is higher (70%-80%) in late-type disks with low stellar mass (M * 1010.5 M ⊙), and decreases with higher gas mass ratio. These results suggest that bars are more difficult to grow in massive disks that are dynamically hotter than low-mass disks. However, once a bar forms, it can easily buckle in the massive disks, where a deeper potential can sustain the vertical resonant orbits. We also find a probable buckling bar candidate (ESO 506-G004) that could provide further clues to understand the timescale of the buckling process.

  12. P{bar P} collider physics

    Energy Technology Data Exchange (ETDEWEB)

    Demarteau, M. [State Univ. of New York, Stony Brook, NY (United States)

    1992-04-01

    A brief introduction to {bar p}p collider physics is given. Selected results from the collider experiments at the CERN S{bar p}pS and the Tevatron collider are described. The emphasis is on experimental aspects of {bar p}p collisions. Minimum bias physics and the production of jets, Intermediate Vector Bosons and heavy flavors is reviewed. The outlook for physics at hadron colliders for the near future is briefly discussed.

  13. Installation of Shimming Bars for CYCIAE-100

    Institute of Scientific and Technical Information of China (English)

    LV; Yin-long; WANG; Zhen-hui; ZHONG; Jun-qing; LIU; Geng-shou

    2012-01-01

    <正>The 100 MeV high intensity proton cyclotron, CYCIAE-100, is the most critical equipment of the BRIF project at CIAE. The shimming bars are used to get the isochronous magnetic field. In the process of magnetic mapping and shimming, the bars should be repeated the installed and disassembly for about 10 times. Each time the installation precision must be ensured. The bars installation schedule and quality are directly related to the BRIF project progress.

  14. Periodic body-and-bar frameworks

    CERN Document Server

    Borcea, Ciprian S; Tanigawa, Shin-ichi

    2011-01-01

    Abstractions of crystalline materials known as periodic body-and-bar frameworks are made of rigid bodies connected by fixed-length bars and subject to the action of a group of translations. In this paper, we give a Maxwell-Laman characterization for generic minimally rigid periodic body-and-bar frameworks. As a consequence we obtain efficient polynomial time algorithms for their recognition based on matroid partition and pebble games.

  15. Nuss bar migrations: occurrence and classification

    Energy Technology Data Exchange (ETDEWEB)

    Binkovitz, Lauren E.; Binkovitz, Larry A. [Mayo Clinic, Department of Radiology, Rochester, MN (United States); Zendejas, Benjamin; Moir, Christopher R. [Mayo Clinic, Department of Surgery, Rochester, MN (United States)

    2016-12-15

    Pectus excavatum results from dorsal deviation of the sternum causing narrowing of the anterior-posterior diameter of the chest. It can result in significant cosmetic deformities and cardiopulmonary compromise if severe. The Nuss procedure is a minimally invasive technique that involves placing a thin horizontally oriented metal bar below the dorsal sternal apex for correction of the pectus deformity. To identify the frequency and types of Nuss bar migrations, to present a new categorization of bar migrations, and to present examples of true migrations and pseudomigrations. We retrospectively reviewed the electronic medical records and all pertinent radiologic studies of 311 pediatric patients who underwent a Nuss procedure. We evaluated the frequency and type of bar migrations. Bar migration was demonstrated in 23 of 311 patients (7%) and occurred within a mean period of 26 days after surgery. Bar migrations were subjectively defined as deviation of the bar from the position demonstrated on the immediate postoperative radiographs and categorized as superior, inferior, rotation, lateral or flipped using a new classification system. Sixteen of the 23 migrations required re-operation. Nuss bar migration can be diagnosed with careful evaluation of serial radiographs. Nuss bar migration has a wide variety of appearances and requires exclusion of pseudomigration resulting from changes in patient positioning between radiologic examinations. (orig.)

  16. Chiral Perturbation Theory and the $\\bar B \\bar B$ Strong Interaction

    CERN Document Server

    Liu, Zhan-Wei; Zhu, Shi-Lin

    2012-01-01

    We have calculated the potentials of the heavy (charmed or bottomed) pseudoscalar mesons up to $O(\\epsilon^2)$ with the heavy meson chiral perturbation theory. We take into account the contributions from the football, triangle, box, and crossed diagrams with the 2$\\phi$ exchange and one-loop corrections to the contact terms. We notice that the total 2$\\phi$-exchange potential alone is attractive in the small momentum region in the channel ${\\bar B \\bar B}^{I=1}$, ${\\bar B_s \\bar B_s}^{I=0}$, or ${\\bar B \\bar B_s}^{I=1/2}$, while repulsive in the channel ${\\bar B \\bar B}^{I=0}$. Hopefully the analytical chiral structures of the potentials may be useful in the extrapolation of the heavy meson interaction from lattice QCD simulation.

  17. submitter Performance simulation of BaBar DIRC bar boxes in TORCH

    CERN Document Server

    Föhl, K; Castillo García, L; Cussans, D; Forty, R; Frei, C; Gao, R; Gys, T; Harnew, N; Piedigrossi, D; Rademacker, J; Ros García, A; van Dijk, M

    2017-01-01

    TORCH is a large-area precision time-of-flight detector based on the DIRC principle. The DIRC bar boxes of the BaBar experiment at SLAC could possibly be reused to form a part of the TORCH detector time-of-flight wall area, proposed to provide positive particle identification of low momentum kaons in the LHCb experiment at CERN. For a potential integration of BaBar bar boxes into TORCH, new imaging readout optics are required. From the several designs of readout optics that have been considered, two are used in this paper to study the effect of BaBar bar optical imperfections on the detector reconstruction performance. The kaon-pion separation powers obtained from analysing simulated photon hit patterns show the performance reduction for a BaBar bar of non-square geometry compared to a perfectly rectangular cross section.

  18. Conceptual Design of 500 watt portable thermophotovoltaic power supply using JP-8 fuel

    Science.gov (United States)

    DeBellis, Crispin L.; Scotto, Mark V.; Scoles, Stephen W.; Fraas, Lewis

    1997-03-01

    Babcock & Wilcox (B&W) and JX Crystals (JXC) have developed an innovative design for a compact, 500 watt net electric (We), 24-VDC thermophotovoltaic (TPV) power supply using JP-8 fuel. As currently envisioned, the TPV generator will be approximately 20 cm (8 inches) in diameter and 50 cm (20 inches) high, not including a fuel tank and controls. The total system may weigh as little as 7.5 kg (16.5 lb) without fuel. This system will achieve high efficiency and high power density relative to its size through the use of low bandgap gallium antimonide (GaSb) PV cells and a matched emitter. A thermally integrated fuel vaporizer and recuperator will boost system efficiency by transferring the unused energy in the exhaust stream to the incoming fuel and combustion air. At rated conditions and 500 We output, the system is expected to have an overall efficiency of 8% to 10%. This paper examines the trade-offs between system efficiency, power density, and weight required in the selection and configuration of the major system components.

  19. Component development for 500 watt diesel fueled portable thermophotovoltaic (TPV) power supply

    Science.gov (United States)

    DeBellis, Crispin L.; Scotto, Mark V.; Fraas, Lewis; Samaras, John; Watson, Ron C.; Scoles, Stephen W.

    1999-03-01

    McDermott Technology, Inc. (MTI) and JX Crystals have developed an innovative design for a compact, 500-watt, thermophotovoltaic (TPV) power supply using diesel fuel. Under a contract with the Defense Advanced Research Projects Agency (DARPA) and managed by the U.S. Army Communications-Electronics Command (CECOM), this design is being reduced to hardware. Prototypes of the two main subsystems, the power converter assembly (PCA) and the burner/emitter/recuperator (BER), have been designed, fabricated, and tested. The PCA uses low-band-gap gallium antimonide (GaSb) photovoltaic (PV) cells for high efficiency and power density. The prototype PCA will be air cooled for system simplicity and portability. However, initial testing was performed on a water-cooled PCA. The BER uses a thermal vaporizer to produce a stable, high-intensity, low-emissions combustion zone inside an impervious emitter. A thermally integrated recuperator is utilized to boost system efficiency by transferring the unused energy in the exhaust stream to the incoming fuel and combustion air. This paper describes the design, testing and performance of the first-generation PCA and BER along with model predictions used for design and evaluation.

  20. Quantum transport with long-range steps on Watts-Strogatz networks

    Science.gov (United States)

    Wang, Yan; Xu, Xin-Jian

    2016-07-01

    We study transport dynamics of quantum systems with long-range steps on the Watts-Strogatz network (WSN) which is generated by rewiring links of the regular ring. First, we probe physical systems modeled by the discrete nonlinear schrödinger (DNLS) equation. Using the localized initial condition, we compute the time-averaged occupation probability of the initial site, which is related to the nonlinearity, the long-range steps and rewiring links. Self-trapping transitions occur at large (small) nonlinear parameters for coupling ɛ=-1 (1), as long-range interactions are intensified. The structure disorder induced by random rewiring, however, has dual effects for ɛ=-1 and inhibits the self-trapping behavior for ɛ=1. Second, we investigate continuous-time quantum walks (CTQW) on the regular ring ruled by the discrete linear schrödinger (DLS) equation. It is found that only the presence of the long-range steps does not affect the efficiency of the coherent exciton transport, while only the allowance of random rewiring enhances the partial localization. If both factors are considered simultaneously, localization is greatly strengthened, and the transport becomes worse.

  1. Narrow linewidth picosecond UV pulsed laser with mega-watt peak power.

    Science.gov (United States)

    Huang, Chunning; Deibele, Craig; Liu, Yun

    2013-04-08

    We demonstrate a master oscillator power amplifier (MOPA) burst mode laser system that generates 66 ps/402.5 MHz pulses with mega-watt peak power at 355 nm. The seed laser consists of a single frequency fiber laser (linewidth picosecond pulse generator, and a fiber based preamplifier. A very high extinction ratio (45 dB) has been achieved by using an adaptive bias control of the EOM. The multi-stage Nd:YAG amplifier system allows a uniformly temporal shaping of the macropulse with a tunable pulse duration. The light output from the amplifier is converted to 355 nm, and over 1 MW peak power is obtained when the laser is operating in a 5-μs/10-Hz macropulse mode. The laser output has a transform-limited spectrum with a very narrow linewidth of individual longitudinal modes. The immediate application of the laser system is the laser-assisted hydrogen ion beam stripping for the Spallation Neutron Source (SNS).

  2. Quantification of degeneracy in Hodgkin-Huxley neurons on Newman-Watts small world network.

    Science.gov (United States)

    Man, Menghua; Zhang, Ya; Ma, Guilei; Friston, Karl; Liu, Shanghe

    2016-08-07

    Degeneracy is a fundamental source of biological robustness, complexity and evolvability in many biological systems. However, degeneracy is often confused with redundancy. Furthermore, the quantification of degeneracy has not been addressed for realistic neuronal networks. The objective of this paper is to characterize degeneracy in neuronal network models via quantitative mathematic measures. Firstly, we establish Hodgkin-Huxley neuronal networks with Newman-Watts small world network architectures. Secondly, in order to calculate the degeneracy, redundancy and complexity in the ensuing networks, we use information entropy to quantify the information a neuronal response carries about the stimulus - and mutual information to measure the contribution of each subset of the neuronal network. Finally, we analyze the interdependency of degeneracy, redundancy and complexity - and how these three measures depend upon network architectures. Our results suggest that degeneracy can be applied to any neuronal network as a formal measure, and degeneracy is distinct from redundancy. Qualitatively degeneracy and complexity are more highly correlated over different network architectures, in comparison to redundancy. Quantitatively, the relationship between both degeneracy and redundancy depends on network coupling strength: both degeneracy and redundancy increase with complexity for small coupling strengths; however, as coupling strength increases, redundancy decreases with complexity (in contrast to degeneracy, which is relatively invariant). These results suggest that the degeneracy is a general topologic characteristic of neuronal networks, which could be applied quantitatively in neuroscience and connectomics.

  3. Stochastic resonance on Newman-Watts networks of Hodgkin-Huxley neurons with local periodic driving

    Energy Technology Data Exchange (ETDEWEB)

    Ozer, Mahmut [Zonguldak Karaelmas University, Engineering Faculty, Department of Electrical and Electronics Engineering, 67100 Zonguldak (Turkey)], E-mail: mahmutozer2002@yahoo.com; Perc, Matjaz [University of Maribor, Faculty of Natural Sciences and Mathematics, Department of Physics, Koroska cesta 160, SI-2000 Maribor (Slovenia); Uzuntarla, Muhammet [Zonguldak Karaelmas University, Engineering Faculty, Department of Electrical and Electronics Engineering, 67100 Zonguldak (Turkey)

    2009-03-02

    We study the phenomenon of stochastic resonance on Newman-Watts small-world networks consisting of biophysically realistic Hodgkin-Huxley neurons with a tunable intensity of intrinsic noise via voltage-gated ion channels embedded in neuronal membranes. Importantly thereby, the subthreshold periodic driving is introduced to a single neuron of the network, thus acting as a pacemaker trying to impose its rhythm on the whole ensemble. We show that there exists an optimal intensity of intrinsic ion channel noise by which the outreach of the pacemaker extends optimally across the whole network. This stochastic resonance phenomenon can be further amplified via fine-tuning of the small-world network structure, and depends significantly also on the coupling strength among neurons and the driving frequency of the pacemaker. In particular, we demonstrate that the noise-induced transmission of weak localized rhythmic activity peaks when the pacemaker frequency matches the intrinsic frequency of subthreshold oscillations. The implications of our findings for weak signal detection and information propagation across neural networks are discussed.

  4. A nonlinearity in permanent-magnet systems used in watt balances

    CERN Document Server

    Li, Shisong; Pratt, Jon

    2014-01-01

    Watt balances are used to measure the Planck constant and will be used in the future to realize mass at the kilogram level. They increasingly rely on permanent magnet systems to generate the magnetic flux. It has been known that the weighing current might effect the magnetization state of the permanent magnetic system used in these systems causing a systematic bias that can lead to an error in the result if not accounted for. In this article a simple model explaining the effect of the weighing current on the yoke of the magnet is developed. This model leads to a nonlinear dependence of the magnetic flux density in the gap that is proportional to the squared value of the coil current. The effect arises from changing the reluctance of the yoke by the additional field produced by the coil. Our analysis shows that the effect depends on the width of the air gap, the magnetic flux density in the air gap, and the $BH$ curve of the yoke material. Suggestions to reduce the nonlinear effect are discussed.

  5. Session: Reservoir Technology

    Energy Technology Data Exchange (ETDEWEB)

    Renner, Joel L.; Bodvarsson, Gudmundur S.; Wannamaker, Philip E.; Horne, Roland N.; Shook, G. Michael

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of five papers: ''Reservoir Technology'' by Joel L. Renner; ''LBL Research on the Geysers: Conceptual Models, Simulation and Monitoring Studies'' by Gudmundur S. Bodvarsson; ''Geothermal Geophysical Research in Electrical Methods at UURI'' by Philip E. Wannamaker; ''Optimizing Reinjection Strategy at Palinpinon, Philippines Based on Chloride Data'' by Roland N. Horne; ''TETRAD Reservoir Simulation'' by G. Michael Shook

  6. Geothermal reservoir engineering

    CERN Document Server

    Grant, Malcolm Alister

    2011-01-01

    As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate.  For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference.  This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The bo

  7. Bar pattern speeds in CALIFA galaxies. I. Fast bars across the Hubble sequence

    NARCIS (Netherlands)

    Aguerri, J. A. L.; Méndez-Abreu, J.; Falcón-Barroso, J.; Amorin, A.; Barrera-Ballesteros, J.; Cid Fernandes, R.; García-Benito, R.; García-Lorenzo, B.; González Delgado, R. M.; Husemann, B.; Kalinova, V.; Lyubenova, M.; Marino, R. A.; Márquez, I.; Mast, D.; Pérez, E.; Sánchez, S. F.; van de Ven, G.; Walcher, C. J.; Backsmann, N.; Cortijo-Ferrero, C.; Bland-Hawthorn, J.; del Olmo, A.; Iglesias-Páramo, J.; Pérez, I.; Sánchez-Blázquez, P.; Wisotzki, L.; Ziegler, B.

    2015-01-01

    Context. The bar pattern speed (Ωb) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring Ωb. The non-parametric method proposed by Tremaine & Weinberg (1984, ApJ, 282, L5; TW) and based on stellar kinematics is the mo

  8. A study of B0bar --> D(*)0 K(*)bar decays

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Gaillard, J M; Hicheur, A; Karyotakis, Yu; Lees, J P; Tisserand, V; Zghiche, A; Palano, A; Pompili, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Borgland, A W; Breon, A B; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadel, R W; Kadyk, J; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, Michael T; Shelkov, V G; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Steinke, M; Boyd, J T; Chevalier, N; Cottingham, W N; Kelly, M P; Latham, T E; Wilson, F F; Çuhadar-Dönszelmann, T; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Thiessen, D; Khan, A; Kyberd, P; Teodorescu, L; Blinov, A E; Blinov, V E; Druzhinin, V P; Golubev, V B; Ivanchenko, V N; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Yushkov, A N; Best, D; Bruinsma, M; Chao, M; Eschrich, I; Kirkby, D; Lankford, A J; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Buchanan, C; Hartfiel, B L; Foulkes, S D; Gary, J W; Shen, B C; Wang, K; Del Re, D; Hadavand, H K; Hill, E J; MacFarlane, D B; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Dahmes, B; Long, O; Lu, A; Mazur, M A; Richman, J D; Verkerke, W; Beck, T W; Eisner, A M; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Yang, S; Jayatilleke, S M; Mancinelli, G; Meadows, B T; Sokoloff, M D; Abe, T; Blanc, F; Bloom, P; Chen, S; Ford, W T; Nauenberg, U; Olivas, A; Rankin, P; Smith, J G; Zhang, J; Zhang, L; Chen, A; Harton, J L; Soffer, A; Toki, W H; Wilson, R J; Zeng, Q; Altenburg, D; Brandt, T; Brose, J; Dickopp, M; Feltresi, E; Hauke, A; Lacker, H M; Müller-Pfefferkorn, R; Nogowski, R; Otto, S; Petzold, A; Schubert, J; Schubert, Klaus R; Schwierz, R; Spaan, B; Sundermann, J E; Bernard, D; Bonneaud, G R; Brochard, F; Grenier, P; Schrenk, S; Thiebaux, C; Vasileiadis, G; Verderi, M; Bard, D J; Clark, P J; Lavin, D; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Azzolini, V; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Sarti, A; Treadwell, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Patteri, P; Peruzzi, I M; Piccolo, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Crosetti, G; Lo Vetere, M; Macri, M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Bailey, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Won, E; Dubitzky, R S; Langenegger, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Gaillard, J R; Morton, G W; Nash, J A; Nikolich, M B; Taylor, G P; Charles, M J; Grenier, G J; Mallik, U; Cochran, J; Crawley, H B; Lamsa, J; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Yi, J; Biasini, M; Covarelli, R; Pioppi, M; Davier, M; Giroux, X; Grosdidier, G; Höcker, A; Laplace, S; Le Diberder, F R; Lepeltier, V; Lutz, A M; Petersen, T C; Plaszczynski, S; Schune, M H; Tantot, L; Wormser, G; Cheng, C H; Lange, D J; Simani, M C; Wright, D M; Bevan, A J; Chavez, C A; Coleman, J P; Forster, I J; Fry, J R; Gabathuler, Erwin; Gamet, R; Hutchcroft, D E; Parry, R J; Payne, D J; Sloane, R J; Touramanis, C; Back, J J; Harrison, P F; Mohanty, G B; Cowan, G; Flack, R L; Flächer, H U; Green, M G; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Winter, M A; Brown, D; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Hart, P A; Hodgkinson, M C; Lafferty, G D; Lyon, A J; Williams, J C; Farbin, A; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Lillard, V; Roberts, D A; Blaylock, G; Dallapiccola, C; Flood, K T; Hertzbach, S S; Kofler, R; Koptchev, V B; Moore, T B; Saremi, S; Stängle, H; Willocq, S; Cowan, R; Sciolla, G; Sekula, S J; Taylor, F; Yamamoto, R K; Mangeol, D J J; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L M; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Taras, P; Nicholson, H; Cavallo, N; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Wilden, L; Jessop, C P; LoSecco, J M; Allmendinger, T; Gan, K K; Honscheid, K; Hufnagel, D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Brau, J E; Frey, R; Igonkina, O; Potter, C T; Sinev, N B; Strom, D; Torrence, E; Colecchia, F; Dorigo, A; Galeazzi, F; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Tiozzo, G; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; La Vaissière, C de; Del Buono, L; Hamon, O; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Pivk, M; Roos, L; T'Jampens, S; Therin, G; Manfredi, P F; Re, V; Behera, P K; Gladney, L; Guo, Q H; Panetta, J; Angelini, C; Batignani, G; Bettarini, S; Bondioli, M; Bucci, F; Calderini, G; Carpinelli, M; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Martínez-Vidal, F; Neri, N; Paoloni, E; Rama, M; Rizzo, G; Sandrelli, F; Walsh, J; Haire, M; Judd, D; Paick, K; Wagoner, D E; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Miftakov, V; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Pierini, M; Piredda, G; Safai-Tehrani, F; Voena, C; Christ, S; Wagner, G; Waldi, R; Adye, T; De Groot, N; Franek, B J; Geddes, N I; Gopal, G P; Olaiya, E O; Aleksan, Roy; Emery, S; Gaidot, A; Ganzhur, S F; Giraud, P F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; London, G W; Mayer, B; Schott, G; Vasseur, G; Yéche, C; Zito, M; Purohit, M V; Weidemann, A W; Wilson, J R; Yumiceva, F X; Aston, D; Bartoldus, R; Berger, N; Boyarski, A M; Buchmüller, O L; Claus, R; Convery, M R; Cristinziani, M; De Nardo, Gallieno; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Elsen, E E; Fan, S; Field, R C; Glanzman, T; Gowdy, S J; Hadig, T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Petrak, S; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Simi, G; Snyder, A; Soha, A; Stelzer, J; Su, D; Sullivan, M K; Vavra, J; Wagner, S R; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Young, C C; Burchat, Patricia R; Edwards, A J; Meyer, T I; Petersen, B A; Roat, C; Ahmed, S; Alam, M S; Ernst, J A; Saeed, M A; Saleem, M; Wappler, F R; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Kim, H; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Poropat, P; Vuagnin, G; Panvini, R S; Banerjee, Sw; Brown, C M; Fortin, D; Jackson, P D; Kowalewski, R V; Roney, J M; Sobie, R J; Band, H R; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Graham, M; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mihályi, A; Mohapatra, A K; Pan, Y; Prepost, R; Tan, P; Von Wimmersperg-Töller, J H; Wu, J; Wu, S L; Yu, Z; Greene, M G; Neal, H

    2004-01-01

    We present a study of the decays B0bar --> D(*)0 K(*)0bar using a sample of 124 million Upsilon(4S) --> B0bar B0 decays collected with the BaBar detector at the PEP-II asymmetric-energy e+e- collider at SLAC. We report evidence for the decay of B0 and B0bar mesons to the D*0 K_S final state with an average branching fraction BF(B --> D*0 K0bar) = (4.5 +/- 1.9 +/- 0.5) x 10^-5. Similarly, we measure BF(B --> D0 K0bar) = (6.2 +/- 1.2 +/- 0.4) x 10^-5 for the D0 K_S final state. We also measure BF(B0bar --> D0 K*0bar) = (6.2 +/- 1.4 +/- 0.6) x 10^-5 and set a 90% C.L. upper limit BF(B0bar --> D0bar K*0bar) < 4.1 x 10^-5. All results presented in this paper are preliminary.

  9. Too Much Bar and Not Enough Mitzvah? A Proposed Research Agenda on Bar/Bat Mitzvah

    Science.gov (United States)

    Schoenfeld, Stuart

    2010-01-01

    Jewish educators are understandably interested in research on how bar/bat mitzvah affect Jewish education or research on what Jewish schools have done to avoid the distortions of a focus on bar/bat mitzvah. Research might also focus on the somewhat different and more ambitious topic of the role that bar/bat mitzvah play in contemporary Jewish…

  10. On the Relation between Spector's Bar Recursion and Modified Bar Recursion

    DEFF Research Database (Denmark)

    Oliva, Paulo Borges

    2002-01-01

    We introduce a variant of Spector's Bar Recursion in finite types to give a realizability interpretation of the classical axiom of dependent choice allowing for the extraction of witnesses from proofs of Sigma_1 formulas in classical analysis. We also give a bar recursive definition of the fan...... functional and study the relationship of our variant of Bar Recursion with others....

  11. WattJournals: Towards an Economic and Lightweight Search Tool Alternative for Libraries To Help Their Students and Researchers Keep Up-To-Date

    Directory of Open Access Journals (Sweden)

    Santiago Chumbe

    2010-12-01

    Full Text Available Learn how Heriot-Watt University Library's WattJournals could be just the search tool your patrons need to efficiently find the content that your library subscribes to. Built on top of a RESTful search API created by the JISC-sponsored JournalTOCs Project, WattJournals is a toolkit for connecting fulltext articles to the people who need them. This article provides a technical overview of the system, showing how it uses citation data pulled from the JournalTOCs table of contents awareness service to provide access to just your library's subscriptions.

  12. Adventures of a tidally induced bar

    CERN Document Server

    Lokas, E L; Debattista, V P; Valluri, M; del Pino, A; Semczuk, M; Gajda, G; Kowalczyk, K

    2014-01-01

    Using N-body simulations, we study the properties of a bar induced in a dwarf galaxy as a result of tidal interaction with the Milky Way. The dwarf is initially composed of a disk embedded in a dark matter halo and we follow its evolution on a typical orbit for 10 Gyr. It undergoes an evolution typical of tidally stirred dwarf galaxies: it loses mass, the stellar component transforms from a disk to a spheroid and the rotation of the stars is partially replaced by random motions. A tidally induced bar forms at the first pericentre passage and survives until the end of the evolution. Fourier decomposition of the distribution of stars reveals that only even modes are significant and preserve a hierarchy so that the bar mode is always the strongest. They show a characteristic profile with a maximum, similar to simulated bars forming in isolated galaxies and observed bars in real galaxies. We adopt the maximum of the bar mode as a measure of the bar strength and we estimate the bar length by comparing the density ...

  13. Tubular stabilizer bars – calculations and construction

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2011-01-01

    Full Text Available The article outlines the calculation methods for tubular stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction, selection and manufacturing of tubular stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method.

  14. Stabilizer bars: Part 1. Calculations and construction

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2010-01-01

    Full Text Available The article outlines the calculation methods for stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction and manufacturing of stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method.

  15. Constraints from microlensing on the COBE bar

    Science.gov (United States)

    Zhao, H. S.

    Since the first review of converging evidences for a bar in the center of the Galaxy by de Zeeuw (1992) at the IAU Sym. 153 in Gent five years ago, the Galactic bar idea has been put on a solid footing by an influx of new data (COBE/DIRBE maps, star count data of bulge red clump giants, microlensing optical depth, and bulge stellar proper motions, etc.) and a burst of increasingly sophisticated theoretical models (triaxial luminosity models of Dwek et al. 1994, and Binney, Gerhard & Spergel 1997, steady state stellar bar dynamical model of Zhao 1996, combined luminosity, microlensing and gas kinematics models of Zhao, Rich & Spergel 1996, and Bissantz et al. 1997, etc.), which fit new data and improve upon earlier simple bulge/bar models (Kent 1992, Binney et al. 1991, Blitz & Spergel 1991). While research in this field shifts more and more to constraining the exact phase space and parameter space of the bar, both the non-uniqueness of and the mismatches among bars from different datasets start to show up. I compare the bar from microlensing data with the COBE bar and point out the effects the non-uniqueness.

  16. Stabilizer bars: Part 3. Production methods

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2011-01-01

    Full Text Available The article outlines the methods of stabilizer bar production as well as selected issues concerning the theory of cold roll forming. A proper construction and the selection of parameters are fundamental factors influencing the selection of a suitable production process. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  17. Stabilizer bars: Part 3. Production methods

    OpenAIRE

    Adam-Markus WITTEK; Hans-Christian RICHTER; Bogusław ŁAZARZ

    2011-01-01

    The article outlines the methods of stabilizer bar production as well as selected issues concerning the theory of cold roll forming. A proper construction and the selection of parameters are fundamental factors influencing the selection of a suitable production process. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  18. Bar Study Stories. Issues in Prevention

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    This issue of "Issues in Prevention" focuses on the impact of the availability of drinks in licensed establishments, such as bars and taverns on student drinking. This issue contains the following articles: (1) Cheap Drinks at College Bars Can Escalate Student Drinking (John D. Clapp); (2) High Alcohol Outlet Density: A Problem for Campuses and…

  19. Uncertainty analysis of fluvial outcrop data for stochastic reservoir modelling

    Energy Technology Data Exchange (ETDEWEB)

    Martinius, A.W. [Statoil Research Centre, Trondheim (Norway); Naess, A. [Statoil Exploration and Production, Stjoerdal (Norway)

    2005-07-01

    Uncertainty analysis and reduction is a crucial part of stochastic reservoir modelling and fluid flow simulation studies. Outcrop analogue studies are often employed to define reservoir model parameters but the analysis of uncertainties associated with sedimentological information is often neglected. In order to define uncertainty inherent in outcrop data more accurately, this paper presents geometrical and dimensional data from individual point bars and braid bars, from part of the low net:gross outcropping Tortola fluvial system (Spain) that has been subjected to a quantitative and qualitative assessment. Four types of primary outcrop uncertainties are discussed: (1) the definition of the conceptual depositional model; (2) the number of observations on sandstone body dimensions; (3) the accuracy and representativeness of observed three-dimensional (3D) sandstone body size data; and (4) sandstone body orientation. Uncertainties related to the depositional model are the most difficult to quantify but can be appreciated qualitatively if processes of deposition related to scales of time and the general lack of information are considered. Application of the N0 measure is suggested to assess quantitatively whether a statistically sufficient number of dimensional observations is obtained to reduce uncertainty to an acceptable level. The third type of uncertainty is evaluated in a qualitative sense and determined by accurate facies analysis. The orientation of sandstone bodies is shown to influence spatial connectivity. As a result, an insufficient number or quality of observations may have important consequences for estimated connected volumes. This study will give improved estimations for reservoir modelling. (author)

  20. Pulsed Laser Centre (CLPU). The Salamanca peta watt laser; Centro de Laseres Pulsados (CLPU). El laser de Petavatio de Salamanca

    Energy Technology Data Exchange (ETDEWEB)

    Franco, L. R.

    2016-08-01

    With pulses lasting 30 photo seconds, the CLPU VEGA laser is capable of generating a peak power level of one peta watt, this making it one of the worlds most powerful lasers. When focussed it can reach extreme intensities. The way in which a pulse of this nature interacts with an atom or what its applications might be are among the questions answered by this article. (Author)

  1. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Pennington, Wayne D.; Acevedo, Horacio; Green, Aaron; Len, Shawn; Minavea, Anastasia; Wood, James; Xie, Deyi

    2002-01-29

    This project has completed the initially scheduled third year of the contract, and is beginning a fourth year, designed to expand upon the tech transfer aspects of the project. From the Stratton data set, demonstrated that an apparent correlation between attributes derived along `phantom' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the Boonsville data set , developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into productive and non-productive subfacies, and developed a method involving cross-correlation of seismic waveforms to provide a reliable map of the various facies present in the area. The Teal South data set provided a surprising set of data, leading us to develop a pressure-dependent velocity relationship and to conclude that nearby reservoirs are undergoing a pressure drop in response to the production of the main reservoir, implying that oil is being lost through their spill points, never to be produced. The Wamsutter data set led to the use of unconventional attributes including lateral incoherence and horizon-dependent impedance variations to indicate regions of former sand bars and current high pressure, respectively, and to evaluation of various upscaling routines.

  2. SILTATION IN RESERVOIRS

    African Journals Online (AJOL)

    human resources. It is also intended to make known to the general public that ... port processes were not properly taken into account. ... Studies carried out on 19 reservoirs in Cen- tral Europe with storage capacity ranging be- tween 1.48 x ...

  3. Dynamical evolution of two associated galactic bars

    CERN Document Server

    Garzon, F

    2014-01-01

    We study the dynamical interactions of mass systems in equilibrium under their own gravity that mutually exert and experience gravitational forces. The method we employ is to model the dynamical evolution of two isolated bars, hosted within the same galactic system, under their mutual gravitational interaction. In this study we present an analytical treatment of the secular evolution of two bars that oscillate with respect one another. Two cases of interaction, with and without geometrical deformation, are discussed. In the latter case, the bars are described as modified Jacobi ellipsoids. These triaxial systems are formed by a rotating fluid mass in gravitational equilibrium with its own rotational velocity and the gravitational field of the other bar. The governing equation for the variation of their relative angular separation is then numerically integrated, which also provides the time evolution of the geometrical parameters of the bodies. The case of rigid, non-deformable, bars produces in some cases an ...

  4. [Development of cereal bar with pineapple skin].

    Science.gov (United States)

    Fonseca, Renata Siqueira; Del Santo, Victor Rogério; Souza, Gilberto Batista de; Pereira, Cíntia Alessandra Matiucci

    2011-06-01

    The cereal bars are multi-component products consisting of cereals, dried fruit and syrup binder and may be added to the consumable parts of fruits and vegetables which usually are not exploited and have high nutritional value, thereby reducing food waste. It was developed a jam with pineapple skin, which it was utilized in 13.5% in the cereal bar formulation. The cereal bar was sensorial evaluated and had its centesimal and mineral composition determined. The new product achieved average of 8.3 for global impression using 9 points hedonic scale, 91% of acceptance rate and 67% of purchase intent. In this first use of pineapple skin jam as food ingredient it can be concluded that its aggregation in the cereal bar formula is feasible, making an accepted product with fibers, proteins and minerals, as an alternative to traditional cereal bars.

  5. Characterization of Bars Induced by Interactions

    Directory of Open Access Journals (Sweden)

    Inma Martinez-Valpuesta

    2016-05-01

    Full Text Available Whether the formation of bars is triggered by interactions or by internal processes has been discussed for many decades. In this work, we study differences between both mechanisms by means of numerical simulations. We relate our analysis to fly-by interactions in different mass groups or clusters according to the velocity of the encounters. We find that once the bar is created, the interaction does not much affect its evolution. We also find that bars can be triggered purely by a slow interaction. Those bars affected or triggered by interaction stay for a longer time in the slow regime, i.e., the corotation radius is more than 1.4 times the bar radius.

  6. Comparison of the Danish step test and the watt-max test for estimation of maximal oxygen uptake

    DEFF Research Database (Denmark)

    Aadahl, Mette; Zacho, Morten; Linneberg, Allan René

    2013-01-01

    test may be a feasible alternative for estimation of VO(2max.)Aim: To compare a simple fitness test, the Danish step test, to an indirect maximal test, the watt-max test, for estimation of VO(2max.)Methods: In the population-based Health2008 study, 2218 men and women aged 30-60 years were invited....... Altogether, 795 eligible participants (response rate 35.8%) performed the watt max and the Danish step test. Correlation and agreement between the two VO(2max) test results was explored by Pearson's rho, Bland-Altman plots, Kappa(w), and gamma coefficients.Results: The correlation between VO(2max) (ml....../kg/min) estimated by the two tests was moderate to high (men: r = 0.69, p test slightly overestimated VO(2max )compared to the watt-max test, more so in women than in men. Agreement between the two tests when VO(2max) was classified in five levels was gamma = 0...

  7. A new Cu(TiBN x ) alloy film for boosting the per-watt illuminance of high power LEDs

    Science.gov (United States)

    Lin, Chon-Hsin

    2017-01-01

    In this study, a new Cu(TiBN x ) alloy film has been explored and utilized as a flexible heat dissipation layer for the substrate of high power LEDs to boost their per-watt illuminance by reducing the thermal resistance and increasing the thermal conductivity of the substrate. The new film is a Cu-alloy seed layer fabricated by co-sputtering Cu and TiB in an N2 atmosphere on a Ta/polyimide (Ta/PI) substrate. The film was then annealed at 340 °C for 1 h without noticeable Cu oxide formation around the film-substrate interface. The new film exhibits low resistivity, high thermal conductivity and low thermal resistance, rendering a substantially higher per-watt illuminance for LEDs that utilize the film as their additional heat dissipation layer. The experimental results gained in the study appear to confirm the new Cu(TiBN x ) film as a good candidate material, at least, for boosting the per-watt illuminance of high power LEDs.

  8. Time Delay and Long-Range Connection Induced Synchronization Transitions in Newman-Watts Small-World Neuronal Networks

    Science.gov (United States)

    Qian, Yu

    2014-01-01

    The synchronization transitions in Newman-Watts small-world neuronal networks (SWNNs) induced by time delay and long-range connection (LRC) probability have been investigated by synchronization parameter and space-time plots. Four distinct parameter regions, that is, asynchronous region, transition region, synchronous region, and oscillatory region have been discovered at certain LRC probability as time delay is increased. Interestingly, desynchronization is observed in oscillatory region. More importantly, we consider the spatiotemporal patterns obtained in delayed Newman-Watts SWNNs are the competition results between long-range drivings (LRDs) and neighboring interactions. In addition, for moderate time delay, the synchronization of neuronal network can be enhanced remarkably by increasing LRC probability. Furthermore, lag synchronization has been found between weak synchronization and complete synchronization as LRC probability is a little less than 1.0. Finally, the two necessary conditions, moderate time delay and large numbers of LRCs, are exposed explicitly for synchronization in delayed Newman-Watts SWNNs. PMID:24810595

  9. Time delay and long-range connection induced synchronization transitions in Newman-Watts small-world neuronal networks.

    Science.gov (United States)

    Qian, Yu

    2014-01-01

    The synchronization transitions in Newman-Watts small-world neuronal networks (SWNNs) induced by time delay τ and long-range connection (LRC) probability P have been investigated by synchronization parameter and space-time plots. Four distinct parameter regions, that is, asynchronous region, transition region, synchronous region, and oscillatory region have been discovered at certain LRC probability P = 1.0 as time delay is increased. Interestingly, desynchronization is observed in oscillatory region. More importantly, we consider the spatiotemporal patterns obtained in delayed Newman-Watts SWNNs are the competition results between long-range drivings (LRDs) and neighboring interactions. In addition, for moderate time delay, the synchronization of neuronal network can be enhanced remarkably by increasing LRC probability. Furthermore, lag synchronization has been found between weak synchronization and complete synchronization as LRC probability P is a little less than 1.0. Finally, the two necessary conditions, moderate time delay and large numbers of LRCs, are exposed explicitly for synchronization in delayed Newman-Watts SWNNs.

  10. A COMPLETE THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE BAR-BAR TENSILE IMPACT APPARATUS

    Institute of Scientific and Technical Information of China (English)

    万华培; 汪洋; 夏源明

    2003-01-01

    A complete three-dimensional FEM model of the Bar-Bar Tensile Impact Apparatus (BTIA) is constructed, in which the slots in the bars and the glue layers between the bars and the flat-shaped specimen are included. For elastic-plastic specimen material, Ly12cz aluminum alloy, the process of tensile impact experiments is simulated and the matching relation between the specimen geometry and the bars is investigated. Based on the FEM analysis, an iterative method is proposed to design a reasonable specimen geometry for obtaining the true dynamic stress-strain relation for a certain specimen material.

  11. Life test result of Ricor K529N 1watt linear cryocooler

    Science.gov (United States)

    Nachman, Ilan; Veprik, Alexander; Pundak, Nachman

    2007-04-01

    The authors summarize the results of the accelerated life testing of the Ricor type K529N 1 Watt linear split Stirling cooler. The test was conducted in the period 2003-2006, during which the cooler accumulated in excess of 27,500 working hours at an elevated ambient temperature, which is equivalent to 45,000 hours at normal ambient conditions, and performed about 7,500 operational cycles including cooldown and steady-state phases. The cryocooler performances were assessed through the cooldown time and power consumption; no visible degradation in performances was observed. After the cooler failure and the compressor disassembling, an electrical short was discovered in the driving coil. The analysis has shown that the wire insulating varnish was not suitable for such elevated temperatures. It is important to note that the cooler under test was taken from the earliest engineering series; in the later manufacturing line military grade wire with high temperature insulation was used, no customer complaints have been recorded in this instance Special attention was paid to the thorough examination of the technical condition of the critical components of the cooler interior. In particular, dynamic piston-cylinder seal, flying leads, internal O-rings and driving coil were examined in the compressor. As to the cold head, we focused on studying the conditions of the dynamic bushing-plunger seal, O-rings and displacer-regenerator. In addition, a leak test was performed to assess the condition of the metallic crushed seals. From the analysis, the authors draw the conclusion that the cooler design is adequate for long life performance (in excess of 20,000 working hours) applications.

  12. De Novo Transcriptome Sequencing of Oryza officinalis Wall ex Watt to Identify Disease-Resistance Genes

    Directory of Open Access Journals (Sweden)

    Bin He

    2015-12-01

    Full Text Available Oryza officinalis Wall ex Watt is one of the most important wild relatives of cultivated rice and exhibits high resistance to many diseases. It has been used as a source of genes for introgression into cultivated rice. However, there are limited genomic resources and little genetic information publicly reported for this species. To better understand the pathways and factors involved in disease resistance and accelerating the process of rice breeding, we carried out a de novo transcriptome sequencing of O. officinalis. In this research, 137,229 contigs were obtained ranging from 200 to 19,214 bp with an N50 of 2331 bp through de novo assembly of leaves, stems and roots in O. officinalis using an Illumina HiSeq 2000 platform. Based on sequence similarity searches against a non-redundant protein database, a total of 88,249 contigs were annotated with gene descriptions and 75,589 transcripts were further assigned to GO terms. Candidate genes for plant–pathogen interaction and plant hormones regulation pathways involved in disease-resistance were identified. Further analyses of gene expression profiles showed that the majority of genes related to disease resistance were all expressed in the three tissues. In addition, there are two kinds of rice bacterial blight-resistant genes in O. officinalis, including two Xa1 genes and three Xa26 genes. All 2 Xa1 genes showed the highest expression level in stem, whereas one of Xa26 was expressed dominantly in leaf and other 2 Xa26 genes displayed low expression level in all three tissues. This transcriptomic database provides an opportunity for identifying the genes involved in disease-resistance and will provide a basis for studying functional genomics of O. officinalis and genetic improvement of cultivated rice in the future.

  13. Results of Performance Tests Performed on the John Watts Casing Connection on 7" Pipe

    Energy Technology Data Exchange (ETDEWEB)

    John D. Watts

    1999-08-01

    Stress Engineering Services (SES) was contracted by Mr. John Watts to test his threaded connection developed for oilfield oil and gas service. This particular test required the application of a variety of loads including axial tension and compression, internal pressure (gas), external pressure (water), bending and both low and elevated temperature. These loads were used to determine the sealing and structural limits of the connection. The connection design tested had tapered threads with 10 threads per inch. A square thread form and a round thread form were tested. The square thread form had a 2{sup o} load flank and 15{sup o} stab flank. The round thread had a 0{sup o} load flank and 20{sup o} stab flank. Most of the testing was performed on the round thread form. Both a coupled connection design and an integral connection design were tested. The coupling was a pin by pin (male) thread, with the pipe having a box (female) thread. Both designs have outside and inside diameters that are flush with the pipe body. Both designs also contain a small external shoulder. The test procedure selected for this evaluation was the newly written ISO 13679 procedure for full scale testing of casing and tubing connections. The ISO procedure requires a variety of tests that includes makeup/breakout testing, internal gas sealability/external water sealability testing with axial tension, axial compression, bending, internal gas thermal cycle tests and limit load (failure) tests. This test was performed with four coupled samples and included most of these loads. Two integral samples were also included for limit load testing ISO makeup/breakout tests are divided into three types--initial makeup, IML1, repeated makeup within the same sample, MBL, and repeated makeup using several samples called round robin, RR. IMU and MBL were performed in this project. The ISO sealing and structural procedure is divided into four primary tests and identified as Series A, B, C and Limit Load (failure

  14. Results of Performance Tests Performed on the John Watts Casing Connection on 7" Pipe

    Energy Technology Data Exchange (ETDEWEB)

    John D. Watts

    1999-08-01

    Stress Engineering Services (SES) was contracted by Mr. John Watts to test his threaded connection developed for oilfield oil and gas service. This particular test required the application of a variety of loads including axial tension and compression, internal pressure (gas), external pressure (water), bending and both low and elevated temperature. These loads were used to determine the sealing and structural limits of the connection. The connection design tested had tapered threads with 10 threads per inch. A square thread form and a round thread form were tested. The square thread form had a 2{sup o} load flank and 15{sup o} stab flank. The round thread had a 0{sup o} load flank and 20{sup o} stab flank. Most of the testing was performed on the round thread form. Both a coupled connection design and an integral connection design were tested. The coupling was a pin by pin (male) thread, with the pipe having a box (female) thread. Both designs have outside and inside diameters that are flush with the pipe body. Both designs also contain a small external shoulder. The test procedure selected for this evaluation was the newly written ISO 13679 procedure for full scale testing of casing and tubing connections. The ISO procedure requires a variety of tests that includes makeup/breakout testing, internal gas sealability/external water sealability testing with axial tension, axial compression, bending, internal gas thermal cycle tests and limit load (failure) tests. This test was performed with four coupled samples and included most of these loads. Two integral samples were also included for limit load testing ISO makeup/breakout tests are divided into three types--initial makeup, IML1, repeated makeup within the same sample, MBL, and repeated makeup using several samples called round robin, RR. IMU and MBL were performed in this project. The ISO sealing and structural procedure is divided into four primary tests and identified as Series A, B, C and Limit Load (failure

  15. Reservoir geochemistry: A link between reservoir geology and engineering?

    Energy Technology Data Exchange (ETDEWEB)

    Larter, S.R.; Aplin, A.C. [Univ. of Newcastle upon Tyne (United Kingdom); Corbett, P.; Ementon, N. [Heriot-Watt Univ., Edinburgh (United Kingdom)

    1994-12-31

    Geochemistry provides a natural but poorly exploited link between reservoir geology and engineering. The authors summarize some current applications of geochemistry to reservoir description and stress that because of their strong interactions with mineral surfaces and water, nitrogen and oxygen compounds in petroleum may exert an important influence on the PVT properties of petroleum, viscosity and wettability. The distribution of these compounds in reservoirs is heterogeneous on a sub-meter scale and is partly controlled by variations in reservoir quality. The implied variations in petroleum properties and wettability may account for some of the errors in reservoir simulations.

  16. Reservoir geochemistry: A link between reservoir geology and engineering?

    Energy Technology Data Exchange (ETDEWEB)

    Larter, S.R.; Aplin, A.C.; Chen, M.; Taylor, P.N. [Univ. of Newcastle (Australia); Corbett, P.W.M.; Ementon, N. [Heriot-Watt Univ., Edinburgh (United Kingdom)

    1997-02-01

    Geochemistry provides a natural, but poorly exploited, link between reservoir geology and engineering. The authors summarize some current applications of geochemistry to reservoir description and stress that, because of their strong interactions with mineral surfaces and water, nitrogen and oxygen compounds in petroleum may exert an important influence on the pressure/volume/temperature (PVT) properties of petroleum, viscosity and wettability. The distribution of these compounds in reservoirs is heterogeneous on a submeter scale and is partly controlled by variations in reservoir quality. The implied variations in petroleum properties and wettability may account for some of the errors in reservoir simulations.

  17. Recent CKM and CP Results from BaBar

    CERN Document Server

    ,

    2011-01-01

    We present recent results of B and charm decays from the BaBar experiment. These results include searches for rare or forbidden charm decays, measurements of $|V_{ub}|$ from inclusive ${\\bar B} \\rightarrow X_u l {\\bar \

  18. Cam-controlled boring bar

    Science.gov (United States)

    Glatthorn, Raymond H.

    1986-01-01

    A cam-controlled boring bar system (100) includes a first housing (152) which is rotatable about its longitudinal axis (154), and a second housing in the form of a cam-controlled slide (158) which is also rotatable about the axis (154) as well as being translatable therealong. A tool-holder (180) is mounted within the slide (158) for holding a single point cutting tool. Slide (158) has a rectangular configuration and is disposed within a rectangularly configured portion of the first housing (152). Arcuate cam slots (192) are defined within a side plate (172) of the housing (152), while cam followers (194) are mounted upon the cam slide (158) for cooperative engagement with the cam slots (192). In this manner, as the housing (152) and slide (158) rotate, and as the slide (158) also translates, a through-bore (14) having an hourglass configuration will be formed within a workpiece (16) which may be, for example, a nuclear reactor steam generator tube support plate.

  19. Physicochemical Evaluation of Flaxseed-Date Bar

    Directory of Open Access Journals (Sweden)

    Maimuna Sultana Mohd. Ateequddin

    2015-09-01

    Full Text Available The objective of this study was to develop a flaxseed-date-bar fortified high level of dietary fibre by using functional ingredients. Formulations were developed containing 0, 5, 10, 15 and 20 grams of flaxseed flour. Flaxseed- date bar were evaluated for their, Physic-chemical properties. In the physical evaluation of bar it was found that flaxseed flour increase the hardness from 1076.82g to 1403.12g.The results revealed that the bar containing nuts and oilseeds shows maximum protein content (10.09 percent, dietary fibre content (9.89 percent, and ash content(2.90 percent was found in flaxseed-date bar. The gross energy of the flaxseed-date bar was in the range of 353.75 kcal to 377.08 kcal .The maximum gross energy was recorded by following sample A4were as the minimum was obtained by A0. The result revealed that flaxseed-dates along with nuts can be useful to prepare flaxseed-date bars of good sensory and nutritional value which provide substantial amount of carbohydrates, proteins, fats and dietary fibre.

  20. Do Bars Drive Spiral Density Waves?

    CERN Document Server

    Buta, R J; Elmegreen, B G; Salo, H; Laurikainen, E; Elmegreen, D M; Puerari, I; Block, D L

    2009-01-01

    We present deep near-infrared K_s-band AAT IRIS2 observations of a selected sample of nearby barred spiral galaxies, including some with the strongest known bars. The sample covers a range of Hubble types from SB0- to SBc. The goal is to determine if the torque strengths of the spirals correlate with those of the bars, which might be expected if the bars actually drive the spirals as has been predicted by theoretical studies. This issue has implications for interpreting bar and spiral fractions at high redshift. Analysis of previous samples suggested that such a correlation exists in the near-infrared, where effects of extinction and star formation are less important. However, the earlier samples had only a few excessively strong bars. Our new sample largely confirms our previous studies, but still any correlation is relatively weak. We find two galaxies, NGC 7513 and UGC 10862, where there is a only a weak spiral in the presence of a very strong bar. We suggest that some spirals probably are driven by their ...

  1. Tidally Induced Bars of Galaxies in Clusters

    Science.gov (United States)

    Łokas, Ewa L.; Ebrová, Ivana; del Pino, Andrés; Sybilska, Agnieszka; Athanassoula, E.; Semczuk, Marcin; Gajda, Grzegorz; Fouquet, Sylvain

    2016-08-01

    Using N-body simulations, we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and a Navarro-Frenk-White dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case, we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger and longer, and have lower pattern speeds for tighter orbits. Only for the tightest orbit are the properties of the bar controlled by the orientation of the tidal torque from the cluster at pericenter. The mechanism behind the formation of the bars is the angular momentum transfer from the galaxy stellar component to its halo. All of the bars undergo extended periods of buckling instability that occur earlier and lead to more pronounced boxy/peanut shapes when the tidal forces are stronger. Using all simulation outputs of galaxies at different evolutionary stages, we construct a toy model of the galaxy population in the cluster and measure the average bar strength and bar fraction as a function of clustercentric radius. Both are found to be mildly decreasing functions of radius. We conclude that tidal forces can trigger bar formation in cluster cores, but not in the outskirts, and thus can cause larger concentrations of barred galaxies toward the cluster center.

  2. First Measurement of σ(gg → t$\\bar{t}$)/σ(p$\\bar{p}$ → t$\\bar{t}$)

    Energy Technology Data Exchange (ETDEWEB)

    Alamdari, Shabnaz Pashapour [Univ. of Toronto, ON (Canada)

    2008-01-01

    The work presented here is the first measurement of the fraction of top quark pair production through gluon-gluon fusion. We use an integrated luminosity of 0.96 ± 0.06 fb-1 of p{bar p} collisions at √s of 1.96 TeV collected by the CDF II detector. We select t$\\bar{t}$ candidates by identifying a high-pT lepton candidate, a large missing ET as evidence for a neutrino candidate and at least four high ET jets, one of which has to be identified as originating from a b quark. The challenge is to discriminate between the two production processes with the identical final state, gg → t$\\bar{t}$ and q$\\bar{p}$ → t$\\bar{t}$. We take advantage of the fact that compared to a quark, a gluon is more likely to radiate a low momentum gluon and therefore, one expects a larger number of charged particles with low pT in a process involving more gluons. Given the large uncertainties associated with the modeling of the low pT charged particle multiplicity, a data-driven technique was employed. Using calibration data samples, we show there exists a clear correlation between the observed average number of low pT charged particles and the average number of gluons involved in the production process predicted by Monte Carlo calculations. Given the correlation, one can identify low pT charged particle multiplicity distributions associated with specific average number of gluons. The W + 0 jet sample and dijets sample with leading jet ET in the range of 80-100 GeV are used to find no-gluon and gluon-rich low p{sub T} charged particle multiplicity distributions, respectively. Using these no-gluon and gluon-rich distributions in a likelihood fit, we find the fraction of gluon-rich events in t{bar t} candidates. This fraction has contributions from the signal and background events. Taking into account these contributions and the gg → t$\\bar{t}$ and q$\\bar{q}$ → t$\\bar

  3. Development of an effective pinch bar

    CSIR Research Space (South Africa)

    Ottermann, RW

    2003-02-01

    Full Text Available Length (m) Total Mass (kg) Mass (kg) for clamped length (2,6m) Deflection (25kg load @ clamped length) (mm) Bending / Breaking load (kg) Lightweight (extruded tube) 3.5 2.6 4 3.3 930 35 Manufactured Fibreglass tube 3.2 2.6 8.5 7.1 205... the stiffness of the XDM pinch bar with the extruded fibreglass tube bar is lower than that of the steel pinch bar the bending/braking strength is the same as the mode of failure for both is the bending of the steel tips. 14 3.4 Design review During...

  4. Status of Blue Ridge Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    This is one in a series of reports prepared by the Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overview of Blue Ridge Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports and data available, as well as interview with water resource professionals in various federal, state, and local agencies. Blue Ridge Reservoir is a single-purpose hydropower generating project. When consistent with this primary objective, the reservoir is also operated to benefit secondary objectives including water quality, recreation, fish and aquatic habitat, development of shoreline, aesthetic quality, and other public and private uses that support overall regional economic growth and development. 8 refs., 1 fig.

  5. Study on detailed geological modelling for fluvial sandstone reservoir in Daqing oil field

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Hanqing; Fu Zhiguo; Lu Xiaoguang [Institute of Petroleum Exploration and Development, Daqing (China)

    1997-08-01

    Guided by the sedimentation theory and knowledge of modern and ancient fluvial deposition and utilizing the abundant information of sedimentary series, microfacies type and petrophysical parameters from well logging curves of close spaced thousands of wells located in a large area. A new method for establishing detailed sedimentation and permeability distribution models for fluvial reservoirs have been developed successfully. This study aimed at the geometry and internal architecture of sandbodies, in accordance to their hierarchical levels of heterogeneity and building up sedimentation and permeability distribution models of fluvial reservoirs, describing the reservoir heterogeneity on the light of the river sedimentary rules. The results and methods obtained in outcrop and modem sedimentation studies have successfully supported the study. Taking advantage of this method, the major producing layers (PI{sub 1-2}), which have been considered as heterogeneous and thick fluvial reservoirs extending widely in lateral are researched in detail. These layers are subdivided into single sedimentary units vertically and the microfacies are identified horizontally. Furthermore, a complex system is recognized according to their hierarchical levels from large to small, meander belt, single channel sandbody, meander scroll, point bar, and lateral accretion bodies of point bar. The achieved results improved the description of areal distribution of point bar sandbodies, provide an accurate and detailed framework model for establishing high resolution predicting model. By using geostatistic technique, it also plays an important role in searching for enriched zone of residual oil distribution.

  6. Possible $D\\bar{D}$ and $B\\bar{B}$ Molecular states in a chiral quark model

    CERN Document Server

    Li, M T; Dong, Y B; Zhang, Z Y

    2012-01-01

    We perform a systematic study of the bound state problem of $D\\bar{D}$ and $B\\bar{B}$ systems by using effective interaction in our chiral quark model. Our results show that both the interactions of $D\\bar{D}$ and $B\\bar{B}$ states are attractive, which consequently result in $I^G(J^{PC})=0^+(0^{++})$ $D\\bar{D}$ and $B\\bar{B}$ bound states.

  7. Arrangement to control the roof bar depending on a sliding bar. Einrichtung zur Steuerung einer Hangendkappe in Abhaengigkeit einer Schiebekappe

    Energy Technology Data Exchange (ETDEWEB)

    Weirich, W.; Dettmers, M.

    1984-04-12

    The invention is concerned with an arrangement to control an underground powered support unit the roof bar of which is furnished with a regulating bar. The regulating cylinder of the regulating bar is hydraulically coupled with the sliding cylinder of the sliding bar in such a way that on pulling of the sliding bar the pressing pressure of the roof bar to the roof is reduced automatically to a level which can be preset. (orig.).

  8. A 3D forward stratigraphic model of fluvial meander-bend evolution for prediction of point-bar lithofacies architecture

    Science.gov (United States)

    Yan, Na; Mountney, Nigel P.; Colombera, Luca; Dorrell, Robert M.

    2017-08-01

    Although fundamental types of fluvial meander-bend transformations - expansion, translation, rotation, and combinations thereof - are widely recognised, the relationship between the migratory behaviour of a meander bend, and its resultant accumulated sedimentary architecture and lithofacies distribution remains relatively poorly understood. Three-dimensional data from both currently active fluvial systems and from ancient preserved successions known from outcrop and subsurface settings are limited. To tackle this problem, a 3D numerical forward stratigraphic model - the Point-Bar Sedimentary Architecture Numerical Deduction (PB-SAND) - has been devised as a tool for the reconstruction and prediction of the complex spatio-temporal migratory evolution of fluvial meanders, their generated bar forms and the associated lithofacies distributions that accumulate as heterogeneous fluvial successions. PB-SAND uses a dominantly geometric modelling approach supplemented by process-based and stochastic model components, and is constrained by quantified sedimentological data derived from modern point bars or ancient successions that represent suitable analogues. The model predicts the internal architecture and geometry of fluvial point-bar elements in three dimensions. The model is applied to predict the sedimentary lithofacies architecture of ancient preserved point-bar and counter-point-bar deposits of the middle Jurassic Scalby Formation (North Yorkshire, UK) to demonstrate the predictive capabilities of PB-SAND in modelling 3D architectures of different types of meander-bend transformations. PB-SAND serves as a practical tool with which to predict heterogeneity in subsurface hydrocarbon reservoirs and water aquifers.

  9. Measurement of the B0bar Lifetime and the B0B0bar Oscillation Frequency Using Partially Reconstructed B0bar --> D*+ ell- nu-bar Decays

    CERN Document Server

    Aubert, B; Abrams, G S; Adye, T; Ahmed, M; Ahmed, S; Alam, M S; Albert, J; Aleksan, Roy; Allen, M T; Allison, J; Allmendinger, T; Altenburg, D; Andreassen, R; Andreotti, M; Angelini, C; Anulli, F; Arnaud, N; Aston, D; Azzolini, V; Baak, M; Back, J J; Bailey, S; Baldini-Ferroli, R; Band, H R; Banerjee, Sw; Barate, R; Bard, D J; Barlow, N R; Barlow, R J; Barrett, M; Bartoldus, R; Batignani, G; Battaglia, M; Bauer, J M; Beck, T W; Behera, P K; Bellini, F; Benayoun, M; Benelli, G; Berger, N; Bernard, D; Berryhill, J W; Best, D; Bettarini, S; Bettoni, D; Bevan, A J; Bhimji, W; Bhuyan, B; Bianchi, F; Biasini, M; Biesiada, J; Blanc, F; Blaylock, G; Blinov, A E; Blinov, V E; Bloom, P; Bomben, M; Bóna, M; Bondioli, M; Bonneaud, G R; Bosisio, L; Boutigny, D; Bowerman, D A; Boyarski, A M; Boyd, J T; Bozzi, C; Brandenburg, G; Brandt, T; Brau, J E; Breon, A B; Briand, H; Brose, J; Brown, C L; Brown, C M; Brown, D N; Bruinsma, M; Brunet, S; Bucci, F; Buchanan, C; Buchmüller, O L; Bugg, W; Bukin, A D; Bulten, H; Burchat, P R; Burke, J P; Button-Shafer, J; Buzzo, A; Côté, D; Cahn, R N; Calabrese, R; Calcaterra, A; Calderini, G; Campagnari, C; Capra, R; Carpinelli, M; Cartaro, C; Cavoto, G; Cenci, R; Chaisanguanthum, K S; Chao, M; Charles, E; Charles, M J; Chauveau, J; Chavez, C A; Chen, A; Chen, C; Chen, E; Chen, J C; Chen, S; Chen, X; Cheng, B; Cheng, C H; Chevalier, N; Cibinetto, G; Clark, P J; Claus, R; Cochran, J; Coleman, J P; Contri, R; Convery, M R; Cormack, C M; Cossutti, F; Cottingham, W N; Couderc, F; Covarelli, R; Cowan, G; Cowan, R; Crawley, H B; Cremaldi, L; Cristinziani, M; Çuhadar-Dönszelmann, T; Cunha, A; D'Orazio, A; Dahmes, B; Dallapiccola, C; Danielson, N; Dasu, S; Datta, M; Dauncey, P D; David, P; Davier, M; Davis, D BrownC L; Day, C T; De Groot, N; De Nardo, N; Cavallo, G; Del Buono, L; Della Ricca, G; Di Lodovico, F; Di Marco, E; Dickopp, M; Dingfelder, J C; Dittongo, S; Dong, D; Dorfan, J; Dorigo, A; Druzhinin, V P; Dubitzky, R S; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Dvoretskii, A; Eckhart, E A; Eckmann, R; Edwards, A J; Egede, U; Eichenbaum, A M; Eigen, G; Eisner, A M; Elmer, P; Emery, S; Ernst, J A; Eschenburg, V; Eschrich, I; Eyges, V; Faccini, R; Fan, S; Farbin, A; Feltresi, E; Ferrarotto, F; Ferroni, F; Field, R C; Finocchiaro, G; Flacco, C J; Flack, R L; Flächer, H U; Flood, K T; Ford, K E; Ford, W T; Forster, I J; Forti, F; Fortin, D; Foulkes, S D; Franek, B; Frey, R; Fritsch, M; Fry, J R; Fulsom, B G; Gabathuler, E; Gaidot, A; Gaillard, J R; Galeazzi, F; Gallo, F; Gamba, D; Gamet, R; Gan, K K; Ganzhur, S F; Gary, J W; Gaspero, M; Gatto, F; Fabozzi, C; George, K A; Gill, M S; Giorgi, M A; Giraud, P F; Giroux, X; Gladney, L; Glanzman, T; Godang, R; Goetzen, K; Golubev, V B; Gopal, G P; Gowdy, S J; Gradl, W; Graham, M; Grancagnolo, S; Graugès-Pous, E; Graziani, G; Green, M G; Grenier, P; Gritsan, A V; Grosdidier, G; Groysman, Y; Guo, Q H; Hadavand, H K; Hadig, T; Haire, M; Halyo, V; Hamano, K; Hamel de Monchenault, G; Hamon, O; Harrison, P F; Harrison, T J; Hart, A J; Hartfiel, B L; Hast, C; Hauke, A; Hawkes, C M; Hearty, C; Held, T; Hertzbach, S S; Heusch, C A; Hill, E J; Hitlin, D G; Höcker, A; Hodgkinson, M C; Hollar, J J; Hong, T M; Honscheid, K; Hopkins, D A; Hrynóva, T; Hufnagel, D; Hulsbergen, W D; Hutchcroft, D E; Igonkina, O; Innes, W R; Izen, J M; Jackson, P D; Jackson, P S; Jacobsen, R G; Jawahery, A; Jayatilleke, S M; John, M J J; Johnson, J R; Judd, D; Kadel, R W; Kadyk, J; Kagan, H; Karyotakis, Yu; Kass, R; Kelly, M P; Kelsey, M H; Kerth, L T; Khan, A; Kim, H; Kim, P; Kirkby, D; Kitayama, I; Klose, V; Knecht, N S; Koch, H; Kocian, M L; Koeneke, K; Kofler, R; Kolomensky, Yu G; Koptchev, V B; Kovalskyi, D; Kowalewski, R V; Kozanecki, Witold; Kravchenko, E A; Krishnamurthy, M; Kroeger, R; Kroseberg, J; Kukartsev, G; Kutter, P E; Kyberd, P; Lacker, H M; Lae, C K; Lafferty, G D; Lanceri, L; Lange, D J; Langenegger, U; Lankford, A J; Latham, T E; Lau, Y P; Lazzaro, A; Le Diberder, F R; Lees, J P; Legendre, M; Leith, D W G S; Lepeltier, V; Leruste, P; Levesque, J A; Lewandowski, B; Li Gioi, L; Li, H; Li, X; Libby, J; Lillard, V; Lista, L; Liu, R; Lo Secco, C P; Jessop, J M; Lo Vetere, M; Lockman, W S; Lombardo, V; London, G W; Long, O; Lou, X C; Lü, C; Lu, M; Luitz, S; Luppi, E; Lusiani, A; Lüth, V; Lutz, A M; Lynch, G; Lynch, H L; MacFarlane, D B; Macri, M; Mader, W F; Majewski, S A; Malcles, J; Mallik, U; Mancinelli, G; Mandelkern, M A; Marchiori, G; Margoni, M; Marks, J; Marsiske, H; Martínez-Vidal, F; Mattison, T S; Mayer, B; Mazur, M A; Mazzoni, M A; McKenna, J A; McMahon, T R; Meadows, B T; Mellado, B; Messner, R; Meyer, W T; Mihályi, A; Mir, L M; Mohanty, G B; Mohapatra, A K; Mommsen, R K; Monge, M R; Monorchio, D; Moore, T B; Morandin, M; Morgan, S E; Morganti, M; Morganti, S; Morii, M; Morton, G W; Muheim, F; Müller, D R; Naisbit, M T; Narsky, I; Nash, J A; Nauenberg, U; Nd, 14 40; Neal, H; Negrini, M; Neri, N; Nesom, G; Nicholson, H; Nikolich, M B; Nogowski, R; O'Grady, C P; Ocariz, J; Oddone, P J; Ofte, I; Olaiya, E O; Olivas, A; Olsen, J; Onuchin, A P; Orimoto, T J; Otto, S; Oyanguren, A; Ozcan, V E; Paar, H P; Pacetti, S; Palano, A; Palombo, F; Pan, Y; Panetta, J; Panvini, R S; Paoloni, E; Paolucci, P; Pappagallo, M; Parry, R J; Passaggio, S; Patel, P M; Patrignani, C; Patteri, P; Payne, D J; Pelizaeus, M; Perazzo, A; Perl, M; Peters, K; Petersen, B A; Petersen, T C; Petzold, A; Piatenko, T; Piccolo, D; Piccolo, I M; Peruzzi, M; Piemontese, L; Pierini, M; Pioppi, M; Piredda, G; Plaszczynski, S; Playfer, S; Poireau, V; Polci, F; Pompili, A; Porter, F C; Posocco, M; Potter, C T; Prell, S; Prepost, R; Pripstein, M; Pulliam, T; Purohit, M V; Qi, N D; Rahatlou, S; Rahimi, A M; Rama, M; Rankin, P; Ratcliff, B N; Raven, G; Reidy, J; Ricciardi, S; Richman, J D; Ritchie, J L; Rizzo, G; Roat, C; Roberts, D A; Robertson, S H; Robutti, E; Rodier, S; Roe, N A; Röthel, W; Ronan, M T; Roney, J M; Rong, G; Roodman, A; Roos, L; Rosenberg, E I; Rotondo, M; Roudeau, P; Rubin, A E; Ruddick, W O; Ryd, A; Sacco, R; Saeed, M A; Safai-Tehrani, F; Saleem, M; Salnikov, A A; Salvatore, F; Samuel, A; Sanders, D A; Santroni, A; Saremi, S; Satpathy, A; Schalk, T; Schenk, S; Schindler, R H; Schofield, K C; Schott, G; Schrenk, S; Schröder, H; Schröder, T; Schubert, J; Schubert, K R; Schumm, B A; Schune, M H; Schwiening, J; Schwierz, R; Schwitters, R F; Sciacca, C; Sciolla, G; Seiden, A; Sekula, S J; Serednyakov, S I; Sharma, V; Shen, B C; Simani, M C; Simi, G; Simonetto, F; Sinev, N B; Skovpen, Yu I; Smith, A J S; Smith, J G; Snoek, H L; Snyder, A; Sobie, R J; Soffer, A; Sokoloff, M D; Solodov, E P; Spaan, B; Spanier, S M; Spitznagel, M; Spradlin, P; Stängle, H; Steinke, M; Stelzer, J; Stocchi, A; Stoker, D P; Stroili, R; Strom, D; Strube, J; Stugu, B; Su, D; Sullivan, M K; Summers, D J; Sundermann, J E; Suzuki, K; Swain, S; Tan, P; Taras, P; Taylor, F; Taylor, G P; Telnov, A V; Teodorescu, L; Ter-Antonian, R; Therin, G; Thiebaux, C; Thompson, J M; Tisserand, V; Toki, W H; Torrence, E; Tosi, S; Touramanis, C; Ulmer, K A; Uwer, U; Vasileiadis, G; Vasseur, G; Vavra, J; Vazquez, W P; Verderi, M; Verkerke, W; Viaud, B; Vitale, L; Voci, C; Voena, C; Wagner, G; Wagner, S R; Wagoner, D E; Waldi, R; Walsh, J; Wang, K; Wang, P; Wappler, F R; Watson, A T; Weaver, M; Weidemann, A W; Weinstein, A J R; Wenzel, W A; Wilden, L; Williams, D C; Williams, J C; Willocq, S; Wilson, F F; Wilson, J R; Wilson, M G; Wilson, R J; Wisniewski, W J; Wittgen, M; Won, E; Wong, Q K; Wormser, G; Wright, D H; Wright, D M; Wu, J; Wu, S L; Xie, Y; Yamamoto, R K; Yarritu, A K; Ye, S; Yéche, C; Yi, J; Yi, K; Young, C C; Yu, Z; Yumiceva, F X; Yushkov, A N; Zain, S B; Zallo, A; Zeng, Q; Zghiche, A; Zhang, J; Zhang, L; Zhao, H W; Zhu, Y S; Zito, M; De Sangro, R; Del Re, D; La Vaissière, C de; Von Wimmersperg-Töller, J H

    2006-01-01

    We present a simultaneous measurement of the B0bar lifetime tau_B0 and B0B0bar oscillation frequency Delta_md. We use a sample of about 50000 partially reconstructed B0bar --> D*+ ell- nu-bar decays identified with the BABAR detector at the PEP-II e+e- storage ring at SLAC. The flavor of the other B meson in the event is determined from the charge of another high-momentum lepton. The results are tau_B0 = (1.504 +/- 0.013 (stat) {+0.018}/{-0.013} (syst)) ps, Delta_md = (0.511 +/- 0.007 (stat) {+0.007}/{-0.006} (syst)) ps-1

  10. How Different are Normal and Barred Spirals?

    CERN Document Server

    Bergh, Sidney van den

    2011-01-01

    No significant color differences are found between normal and barred spirals over the range of Hubble stages a - ab - b - bc. Furthermore, no significant difference is seen between the luminosity distributions of normal and barred galaxies over the same range of Hubble stages. However, SBc galaxies are found to be systematically fainter than Sc galaxies at 99% confidence. The observation that normal and barred spirals with Hubble stages a - ab - b - bc have indistinguishable intrinsic colors hints at the possibility that the bars in such spiral galaxies might be ephemeral structures. Finally, it is pointed out that lenticular galaxies of types S0 and SB0 are systematically fainter than are other early-type galaxies, suggesting that such galaxies are situated on evolutionary tracks that differ systematically from those of galaxies that lie along the E - Sa - Sb -Sc and E - SBa - SBb - SBc sequences.

  11. Field observations of nearshore bar formation

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian

    2008-01-01

      The formation of an inner nearshore bar was observed during a high-energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics...... and sediment fluxes were obtained from electromagnetic current meters and optical backscatter sensors. These process measurements showed that a divergence in sediment transport occurred at the location of the developing trough, and observed gradients in cross-shore net sediment flux were consistent...... with the morphological development. The main cause for the flux gradients were cross-shore gradients in offshore-directed mean current (undertow) speed which depended upon local relative wave height and local bed slope....

  12. Blast Quantification Using Hopkinson Pressure Bars.

    Science.gov (United States)

    Clarke, Samuel D; Fay, Stephen D; Rigby, Samuel E; Tyas, Andrew; Warren, James A; Reay, Jonathan J; Fuller, Benjamin J; Gant, Matthew T A; Elgy, Ian D

    2016-07-05

    Near-field blast load measurement presents an issue to many sensor types as they must endure very aggressive environments and be able to measure pressures up to many hundreds of megapascals. In this respect the simplicity of the Hopkinson pressure bar has a major advantage in that while the measurement end of the Hopkinson bar can endure and be exposed to harsh conditions, the strain gauge mounted to the bar can be affixed some distance away. This allows protective housings to be utilized which protect the strain gauge but do not interfere with the measurement acquisition. The use of an array of pressure bars allows the pressure-time histories at discrete known points to be measured. This article also describes the interpolation routine used to derive pressure-time histories at un-instrumented locations on the plane of interest. Currently the technique has been used to measure loading from high explosives in free air and buried shallowly in various soils.

  13. Barring intervention? Lesbian and gay bars as an underutilized venue for tobacco interventions.

    Science.gov (United States)

    Leibel, Katherine; Lee, Joseph G L; Goldstein, Adam O; Ranney, Leah M

    2011-07-01

    Lesbian, gay, bisexual, and transgender (LGBT) communities are at high risk for tobacco use. While LGBT communities have historically considered bars to be safe places to socialize and congregate, these spaces are often tobacco-friendly environments and may have potential as sites for much needed intervention. Only a few public health interventions have attempted to work through bars and clubs to decrease tobacco use in the LGBT populations. Evidence from HIV prevention suggests some potential interventions in bars, and the tobacco industry has worked extensively (and successfully) to utilize bars in marketing efforts. Lesbian and gay bars are underutilized in tobacco control, suggesting missed avenues for chronic disease prevention programs. Researchers and communities should continue to recognize the importance of clean indoor air laws covering bars and develop additional strategies for reaching LGBT populations with disparities.

  14. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony,

    2013-01-01

    International audience; Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar and...

  15. Intelligent Bar Chart Plagiarism Detection in Documents

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts. PMID:25309952

  16. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony,

    2013-01-01

    International audience; Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar and...

  17. Intelligent bar chart plagiarism detection in documents.

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Rehman, Amjad; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

  18. Bar pattern speeds in CALIFA galaxies. I. Fast bars across the Hubble sequence

    Science.gov (United States)

    Aguerri, J. A. L.; Méndez-Abreu, J.; Falcón-Barroso, J.; Amorin, A.; Barrera-Ballesteros, J.; Cid Fernandes, R.; García-Benito, R.; García-Lorenzo, B.; González Delgado, R. M.; Husemann, B.; Kalinova, V.; Lyubenova, M.; Marino, R. A.; Márquez, I.; Mast, D.; Pérez, E.; Sánchez, S. F.; van de Ven, G.; Walcher, C. J.; Backsmann, N.; Cortijo-Ferrero, C.; Bland-Hawthorn, J.; del Olmo, A.; Iglesias-Páramo, J.; Pérez, I.; Sánchez-Blázquez, P.; Wisotzki, L.; Ziegler, B.

    2015-04-01

    Context. The bar pattern speed (Ωb) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring Ωb. The non-parametric method proposed by Tremaine & Weinberg (1984, ApJ, 282, L5; TW) and based on stellar kinematics is the most accurate. This method has been applied so far to 17 galaxies, most of them SB0 and SBa types. Aims: We have applied the TW method to a new sample of 15 strong and bright barred galaxies, spanning a wide range of morphological types from SB0 to SBbc. Combining our analysis with previous studies, we investigate 32 barred galaxies with their pattern speed measured by the TW method. The resulting total sample of barred galaxies allows us to study the dependence of Ωb on galaxy properties, such as the Hubble type. Methods: We measured Ωb using the TW method on the stellar velocity maps provided by the integral-field spectroscopy data from the CALIFA survey. Integral-field data solve the problems that long-slit data present when applying the TW method, resulting in the determination of more accurate Ωb. In addition, we have also derived the ratio ℛ of the corotation radius to the bar length of the galaxies. According to this parameter, bars can be classified as fast (ℛ 1.4). Results: For all the galaxies, ℛ is compatible within the errors with fast bars. We cannot rule out (at 95% level) the fast bar solution for any galaxy. We have not observed any significant trend between ℛ and the galaxy morphological type. Conclusions: Our results indicate that independent of the Hubble type, bars have been formed and then evolve as fast rotators. This observational result will constrain the scenarios of formation and evolution of bars proposed by numerical simulations.

  19. Results of Performance Tests Performed on the John Watts WW Casing Connection on 7" Pipe

    Energy Technology Data Exchange (ETDEWEB)

    John D. Watts

    2000-02-01

    Stress Engineering Services (SES) was contracted by Mr. John Watts to test his ''WW'' threaded connection developed for oilfield oil and gas service. This work was a continuation of testing performed by SES as reported in August of 1999. The connection design tested was identified as ''WW''. The samples were all integral (no coupled connections) and contained a wedge thread form with 90{sup o} flank angles relative to the pipe centerline. The wedge thread form is a variable width thread that primarily engages on the flanks. This thread form provides very high torque capacity and good stabbing ability and makeup. The test procedure selected for one of the samples was the newly written ISO 13679 procedure for full scale testing of casing and tubing connections, which is currently going through the ISO acceptance process. The ISO procedure requires a variety of tests that includes makeup/breakout testing, internal gas sealability/external water sealability testing with axial tension, axial compression, bending, internal gas thermal cycle tests and limit load (failure) tests. This test procedure was performed with one sample. Four samples were tested to failure. Table 1 contains a summary of the tasks performed by SES. The project started with the delivery of test samples by Mr. Watts. Pipe from the previous round of tests was used for the new samples. Figure 1 shows the structural and sealing results relative to the pipe body. Sample 1 was used to determine the torque capacity of the connection. Torque was applied to the capacity of SES's equipment which was 28,424 ft-lbs. From this, an initial recommended torque range of 7,200 to 8,800 ft-lbs. was selected. The sample was disassembled and while there was no galling observed in the threads, the end of the pin had collapsed inward. Sample 2 received three makeups. Breakouts 1 and 2 also had collapsing of the pin end, with no thread galling. From these make/breaks, it was

  20. Results of Performance Tests Performed on the John Watts WW Casing Connection on 7" Pipe

    Energy Technology Data Exchange (ETDEWEB)

    John D. Watts

    2000-02-01

    Stress Engineering Services (SES) was contracted by Mr. John Watts to test his ''WW'' threaded connection developed for oilfield oil and gas service. This work was a continuation of testing performed by SES as reported in August of 1999. The connection design tested was identified as ''WW''. The samples were all integral (no coupled connections) and contained a wedge thread form with 90{sup o} flank angles relative to the pipe centerline. The wedge thread form is a variable width thread that primarily engages on the flanks. This thread form provides very high torque capacity and good stabbing ability and makeup. The test procedure selected for one of the samples was the newly written ISO 13679 procedure for full scale testing of casing and tubing connections, which is currently going through the ISO acceptance process. The ISO procedure requires a variety of tests that includes makeup/breakout testing, internal gas sealability/external water sealability testing with axial tension, axial compression, bending, internal gas thermal cycle tests and limit load (failure) tests. This test procedure was performed with one sample. Four samples were tested to failure. Table 1 contains a summary of the tasks performed by SES. The project started with the delivery of test samples by Mr. Watts. Pipe from the previous round of tests was used for the new samples. Figure 1 shows the structural and sealing results relative to the pipe body. Sample 1 was used to determine the torque capacity of the connection. Torque was applied to the capacity of SES's equipment which was 28,424 ft-lbs. From this, an initial recommended torque range of 7,200 to 8,800 ft-lbs. was selected. The sample was disassembled and while there was no galling observed in the threads, the end of the pin had collapsed inward. Sample 2 received three makeups. Breakouts 1 and 2 also had collapsing of the pin end, with no thread galling. From these make/breaks, it was

  1. Hot Disks And Delayed Bar Formation

    CERN Document Server

    Sheth, Kartik; Elmegreen, Debra Meloy; Elmegreen, Bruce G; Athanassoula, E; Weiner, Ben

    2012-01-01

    We present observational evidence for the inhibition of bar formation in dispersion-dominated (dynamically hot) galaxies by studying the relationship between galactic structure and host galaxy kinematics in a sample of 257 galaxies between 0.1 $<$ z $\\leq$ 0.84 from the All-Wavelength Extended Groth Strip International Survey (AEGIS) and the Deep Extragalactic Evolutionary Probe 2 (DEEP2) survey. We find that bars are preferentially found in galaxies that are massive and dynamically cold (rotation-dominated) and on the stellar Tully-Fisher relationship, as is the case for barred spirals in the local Universe. The data provide at least one explanation for the steep ($\\times$3) decline in the overall bar fraction from z=0 to z=0.84 in L$^*$ and brighter disks seen in previous studies. The decline in the bar fraction at high redshift is almost exclusively in the lower mass (10 $<$ log M$_{*}$(\\Msun)$<$ 11), later-type and bluer galaxies. A proposed explanation for this "downsizing" of the bar formation ...

  2. Preparation of a Breadfruit Flour Bar.

    Science.gov (United States)

    Nochera, Carmen L; Ragone, Diane

    2016-05-20

    Breadfruit is a nutritious, high energy food with a low quantity of protein but excellent protein quality. It has the potential to be developed into desired products which will help increase its utilization and add value to the crop. The overall purposes of this investigation were to develop a portable, nutritious, ready-to-eat breadfruit product (bar), test the sensory qualities of the product, and evaluate the nutritional properties of the product. Flour made from the Micronesian variety, Meinpadahk (Artocarpus altilis × Artocarpus mariannensis), was utilized for the development of the breadfruit bar. Breadfruit is a rich source of fiber, vitamins such as vitamin C, minerals such as potassium, and phytochemicals such as flavonoids. Nutritional labeling indicates that the breadfruit bar is high in carbohydrates and low in fat, and sensory evaluation indicates that 81% of the panelists found the bar acceptable while 19% disliked the bar. The breadfruit bar can provide an appealing and inexpensive gluten-free food source based on locally available breadfruit.

  3. Preparation of a Breadfruit Flour Bar

    Directory of Open Access Journals (Sweden)

    Carmen L. Nochera

    2016-05-01

    Full Text Available Breadfruit is a nutritious, high energy food with a low quantity of protein but excellent protein quality. It has the potential to be developed into desired products which will help increase its utilization and add value to the crop. The overall purposes of this investigation were to develop a portable, nutritious, ready-to-eat breadfruit product (bar, test the sensory qualities of the product, and evaluate the nutritional properties of the product. Flour made from the Micronesian variety, Meinpadahk (Artocarpus altilis × Artocarpus mariannensis, was utilized for the development of the breadfruit bar. Breadfruit is a rich source of fiber, vitamins such as vitamin C, minerals such as potassium, and phytochemicals such as flavonoids. Nutritional labeling indicates that the breadfruit bar is high in carbohydrates and low in fat, and sensory evaluation indicates that 81% of the panelists found the bar acceptable while 19% disliked the bar. The breadfruit bar can provide an appealing and inexpensive gluten-free food source based on locally available breadfruit.

  4. Possible Signatures of New Physics in e+e- and bar bar{p}p Collisions

    Science.gov (United States)

    Senju, H.

    1998-12-01

    A preon model with preonic charge predicts many unique new particles. Among them, several are expected to be relatively light, including the fermion lS, which is a stable WIMP, bosons U0 and U+ and the lepto-quark fermion q'. The production of these particles in e+e- and bar{p}p collisions is discussed, focusing on e+e- --> UlS(e) and bar{p}p --> bar{q}'q' + X. A signature of the latter is dilepton + 2 charm jets + missing energy. A discussion on reported unusual events in the dilepton + jets sample is made based on bar{q}'q' production.

  5. $\\bar d - \\bar u$ asymmetry in the proton in chiral effective theory

    Energy Technology Data Exchange (ETDEWEB)

    Salamu, Yusupujiang [Institute of High Energy Physics, CAS, Beijing (China); Ji, Chueng -Ryong [North Carolina State Univ., Raleigh, NC (United States); Melnitchouk, W. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Wang, P. [Institute of High Energy Physics, Beijing (China); Theoretical Physics Center for Science Facilities, CAS, Beijing (China)

    2015-03-25

    We compute the $\\bar d - \\bar u$ asymmetry in the proton in chiral effective theory, including both nucleon and Δ degrees of freedom, within both relativistic and heavy baryon frameworks. In addition to the distribution at $x>0$, we estimate the correction to the integrated asymmetry arising from zero momentum contributions from pion rainbow and bubble diagrams at $x=0$, which have not been accounted for in previous analyses. In conclusion, we find that the empirical $x$ dependence of $\\bar d - \\bar u$ as well as the integrated asymmetry can be well reproduced in terms of a transverse momentum cutoff parameter.

  6. Dynamical Calculations of bar K and MULTI-bar K Nuclei

    Science.gov (United States)

    Gazda, D.; Mareš, J.; Friedman, E.; Gal, A.

    We report on our recent calculations of bar K and multi-bar K nuclei. Calculations were performed fully self-consistently across the periodic table using the relativistic mean-field approach. We aimed at detailed analysis of dynamical processes and various thresholds that determine the K- absorption width. Further, we studied the behavior of the nuclear medium under the influence of increasing strangeness in order to search for bar K condensation precursor phenomena. Last, we explored possibly self-bound strange hadronic configurations consisting of neutrons and bar K0 mesons and studied their properties.

  7. Reservoir geomechanics: new approach to reservoir engineering analysis

    Energy Technology Data Exchange (ETDEWEB)

    Settari, A.; Walters, D.A.; Behie, G.A. [Duke Engineering and Services Inc., Calgary, AB (Canada)

    1999-07-01

    The rock mechanics aspects of reservoir behavior are reviewed, and a description is included of some recent trends in coupled reservoir and strata mechanics modelling. Case histories are summarized which are field applications of these new trends and tools. These case histories include: (1) high rate injection into an oil sand reservoir; (2) compaction modelling of a North Sea reservoir; and (3) brine disposal at a fracturing pressure. Coupled geomechanical modelling is feasible on a full field scale, and it provides flexibility in the degree of coupling and calculational efficiency. The scope of interest in data gathering and characterization must be extended beyond reservoir boundaries because of the coupled modelling approach. This modelling provides results that can be employed in integrated reservoir management that includes reservoir engineering, drilling and completions. Considering the three case histories, coupled modelling can be used for predicting fracture initiation and re-orientation, reservoir compaction and deformations, and enhancement of injectivity due to stress dependent formation properties. Coupled modelling has brought reservoir modelling to a new realistic level and produces significant economic gains. 15 refs., 8 figs.

  8. Optimization of the Infrastructure of Reinforced Concrete Reservoirs by a Particle Swarm Algorithm

    Science.gov (United States)

    Kia, Saeed; Sebt, Mohammad Hassan; Shahhosseini, Vahid

    2015-03-01

    Optimization techniques may be effective in finding the best modeling and shapes for reinforced concrete reservoirs (RCR) to improve their durability and mechanical behavior, particularly for avoiding or reducing the bending moments in these structures. RCRs are one of the major structures applied for reserving fluids to be used in drinking water networks. Usually, these structures have fixed shapes which are designed and calculated based on input discharges, the conditions of the structure's topology, and geotechnical locations with various combinations of static and dynamic loads. In this research, the elements of reservoir walls are first typed according to the performance analyzed; then the range of the membrane based on the thickness and the minimum and maximum cross sections of the bar used are determined in each element. This is done by considering the variable constraints, which are estimated by the maximum stress capacity. In the next phase, based on the reservoir analysis and using the algorithm of the PARIS connector, the related information is combined with the code for the PSO algorithm, i.e., an algorithm for a swarming search, to determine the optimum thickness of the cross sections for the reservoir membrane's elements and the optimum cross section of the bar used. Based on very complex mathematical linear models for the correct embedding and angles related to achain of peripheral strengthening membranes, which optimize the vibration of the structure, a mutual relation is selected between the modeling software and the code for a particle swarm optimization algorithm. Finally, the comparative weight of the concrete reservoir optimized by the peripheral strengthening membrane is analyzed using common methods. This analysis shows a 19% decrease in the bar's weight, a 20% decrease in the concrete's weight, and a minimum 13% saving in construction costs according to the items of a checklist for a concrete reservoir at 10,000 m3.

  9. Geothermal reservoir management

    Energy Technology Data Exchange (ETDEWEB)

    Scherer, C.R.; Golabi, K.

    1978-02-01

    The optimal management of a hot water geothermal reservoir was considered. The physical system investigated includes a three-dimensional aquifer from which hot water is pumped and circulated through a heat exchanger. Heat removed from the geothermal fluid is transferred to a building complex or other facility for space heating. After passing through the heat exchanger, the (now cooled) geothermal fluid is reinjected into the aquifer. This cools the reservoir at a rate predicted by an expression relating pumping rate, time, and production hole temperature. The economic model proposed in the study maximizes discounted value of energy transferred across the heat exchanger minus the discounted cost of wells, equipment, and pumping energy. The real value of energy is assumed to increase at r percent per year. A major decision variable is the production or pumping rate (which is constant over the project life). Other decision variables in this optimization are production timing, reinjection temperature, and the economic life of the reservoir at the selected pumping rate. Results show that waiting time to production and production life increases as r increases and decreases as the discount rate increases. Production rate decreases as r increases and increases as the discount rate increases. The optimal injection temperature is very close to the temperature of the steam produced on the other side of the heat exchanger, and is virtually independent of r and the discount rate. Sensitivity of the decision variables to geohydrological parameters was also investigated. Initial aquifer temperature and permeability have a major influence on these variables, although aquifer porosity is of less importance. A penalty was considered for production delay after the lease is granted.

  10. Cultural Factors Related to Smoking in San Francisco's Irish Bars

    Science.gov (United States)

    Satterlund, Travis D.; Antin, Tamar M. J.; Lee, Juliet P.; Moore, Roland S.

    2009-01-01

    California's Smoke-Free Workplace Act was extended to include bars in 1998. While the majority of bars in the state have become smoke free, in many bars patrons and staff continue to smoke despite the law. The authors present findings from a study which assessed cultural factors related to continued smoking in bars in the city of San Francisco. In…

  11. Branching fractions for chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega

    CERN Document Server

    Onyisi, P U E; Alexander, J P; Cassel, D G; Das, S; Ehrlich, R; Fields, L; Gibbons, L; Gray, S W; Hartill, D L; Heltsley, B K; Hunt, J M; Kreinick, D L; Kuznetsov, V E; Ledoux, J; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Sun, W M; Yelton, J; Rubin, P; Lowrey, N; Mehrabyan, S; Selen, M; Wiss, J; Adams, S; Kornicer, M; Mitchell, R E; Shepherd, M R; Tarbert, C M; Besson, D; Pedlar, T K; Xavier, J; Cronin-Hennessy, D; Hietala, J; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Xiao, T; Tomaradze, A; Brisbane, S; Libby, J; Martin, L; Powell, A; Spradlin, P; Wilkinson, G; Mendez, H; Ge, J Y; Miller, D H; Shipsey, I P J; Xin, B; Adams, G S; Hu, D; Moziak, B; Napolitano, J; Ecklund, K M; Insler, J; Muramatsu, H; Park, C S; Thorndike, E H; Yang, F; Ricciardi, S; Thomas, C; Artuso, M; Blusk, S; Mountain, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M; Bonvicini, G; Cinabro, D; Lincoln, A; Smith, M J; Zhou, P; Zhu, J; Naik, P; Rademacker, J; Asner, D M; Edwards, K W; Reed, J; Randrianarivony, K; Robichaud, A N; Tatishvili, G; White, E J; Briere, R A; Vogel, H

    2010-01-01

    Using a sample of 25.9 million psi(2S) decays acquired with the CLEO-c detector at the CESR e^+e^- collider, we report branching fractions for the decays chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega, with J=0,1,2. Our results for B(chi_cJ-> p p-bar pi^0) and B(chi_cJ-> p p-bar eta) are consistent with, but more precise than, previous measurements. Furthermore, we include the first measurement of B(chi_cJ-> p p-bar omega).

  12. Encapsulated microsensors for reservoir interrogation

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Eddie Elmer; Aines, Roger D.; Spadaccini, Christopher M.

    2016-03-08

    In one general embodiment, a system includes at least one microsensor configured to detect one or more conditions of a fluidic medium of a reservoir; and a receptacle, wherein the receptacle encapsulates the at least one microsensor. In another general embodiment, a method include injecting the encapsulated at least one microsensor as recited above into a fluidic medium of a reservoir; and detecting one or more conditions of the fluidic medium of the reservoir.

  13. Reservoir management cost-cutting

    Energy Technology Data Exchange (ETDEWEB)

    Gulati, M.S.

    1996-12-31

    This article by Mohinder S. Gulati, Chief Engineer, Unocal Geothermal Operations, discusses cost cutting in geothermal reservoir management. The reservoir engineer or geoscientist can make a big difference in the economical outcome of a project by improving well performance and thus making geothermal energy more competitive in the energy marketplace. Bringing plants online in less time and proving resources to reduce the cycle time are some of the ways to reduce reservoir management costs discussed in this article.

  14. Encapsulated microsensors for reservoir interrogation

    Science.gov (United States)

    Scott, Eddie Elmer; Aines, Roger D.; Spadaccini, Christopher M.

    2016-03-08

    In one general embodiment, a system includes at least one microsensor configured to detect one or more conditions of a fluidic medium of a reservoir; and a receptacle, wherein the receptacle encapsulates the at least one microsensor. In another general embodiment, a method include injecting the encapsulated at least one microsensor as recited above into a fluidic medium of a reservoir; and detecting one or more conditions of the fluidic medium of the reservoir.

  15. Evidence for the existence of $u d \\bar{b} \\bar{b}$ and the non-existence of $s s \\bar{b} \\bar{b}$ and $c c \\bar{b} \\bar{b}$ tetraquarks from lattice QCD

    CERN Document Server

    Bicudo, Pedro; Peters, Antje; Wagenbach, Björn; Wagner, Marc

    2015-01-01

    We combine lattice QCD results for the potential of two static antiquarks in the presence of two quarks $q q$ of finite mass and quark model techniques to study possibly existing $q q \\bar{b} \\bar{b}$ tetraquarks. While there is strong indication for a bound four-quark state for $q q = (ud-du) / \\sqrt{2}$, i.e. isospin $I=0$, we find clear evidence against the existence of corresponding tetraquarks with $q q \\in \\{ uu , (ud+du) / \\sqrt{2} , dd \\}$, i.e. isospin $I=1$, $q q = s s$ and $q q = c c$.

  16. Design of a split Hopkinson pressure bar with partial lateral confinement

    Science.gov (United States)

    Barr, Andrew D.; Clarke, Sam D.; Rigby, Sam E.; Tyas, Andrew; Warren, James A.

    2016-12-01

    This paper presents the design of a modified split Hopkinson pressure bar (SHPB) where partial lateral confinement of the specimen is provided by the inertia of a fluid annulus contained in a long steel reservoir. In contrast to unconfined testing, or a constant cell pressure applied before axial loading, lateral restraint is permitted to develop throughout the axial loading: this enables the high-strain-rate shear behaviour of soils to be characterised under conditions which are more representative of buried explosive events. A pressure transducer located in the wall of the reservoir allows lateral stresses to be quantified, and a dispersion-correction technique is used to provide accurate measurements of axial stress and strain. Preliminary numerical modelling is utilised to inform the experimental design, and the capability of the apparatus is demonstrated with specimen results for a dry quartz sand.

  17. Central Mass Concentration and Bar Dissolution in Nearby Spiral Galaxies

    CERN Document Server

    Das, M; Vogel, S N; Regan, M W; Sheth, K; Harris, A I; Jefferys, W H; Das, Mousumi; Teuben, Peter J.; Vogel, Stuart N.; Regan, Michael W.; Sheth, Kartik; Harris, Andrew I.; Jefferys, William H.

    2003-01-01

    We use data from the BIMA Survey of Nearby Galaxies (SONG) to investigate the relationship between ellipticity and central mass concentration in barred spirals. Existing simulations predict that bar ellipticity decreases as inflowing mass driven by the bar accumulates in the central regions, ultimately destroying the bar. Using the ratio of the bulge mass to the mass within the bar radius as an estimate of the central mass concentration, we obtain dynamical mass estimates from SONG CO 1-0 rotation curve data. We find an inverse correlation between bar ellipticity and central mass concentration, consistent with simulations of bar dissolution.

  18. Reservoir Operation to Minimize Sedimentation

    Directory of Open Access Journals (Sweden)

    Dyah Ari Wulandari

    2013-10-01

    Full Text Available The Wonogiri Reservoir capacity decreases rapidly, caused by serious sedimentation problems. In 2007, JICA was proposed a sediment storage reservoir with a new spillway for the purpose of sediment flushing / sluicing from The Keduang River. Due to the change of reservoir storage and change of reservoir system, it requires a sustainable reservoir operation technique. This technique is aimed to minimize the deviation between the input and output of sediments. The main objective of this study is to explore the optimal Wonogiri reservoir operation by minimizing the sediment trap. The CSUDP incremental dynamic programming procedure is used for the model optimization.  This new operating rules will also simulate a five years operation period, to show the effect of the implemented techniques. The result of the study are the newly developed reservoir operation system has many advantages when compared to the actual operation system and the disadvantage of this developed system is that the use is mainly designed for a wet hydrologic year, since its performance for the water supply is lower than the actual reservoir operations.Doi: 10.12777/ijse.6.1.16-23 [How to cite this article:  Wulandari, D.A., Legono, D., and Darsono, S., 2014. Reservoir Operation to Minimize Sedimentation. International Journal of Science and Engineering, 5(2,61-65. Doi: 10.12777/ijse.6.1.16-23] Normal 0 false false false EN-US X-NONE X-NONE

  19. All-optical reservoir computing.

    Science.gov (United States)

    Duport, François; Schneider, Bendix; Smerieri, Anteo; Haelterman, Marc; Massar, Serge

    2012-09-24

    Reservoir Computing is a novel computing paradigm that uses a nonlinear recurrent dynamical system to carry out information processing. Recent electronic and optoelectronic Reservoir Computers based on an architecture with a single nonlinear node and a delay loop have shown performance on standardized tasks comparable to state-of-the-art digital implementations. Here we report an all-optical implementation of a Reservoir Computer, made of off-the-shelf components for optical telecommunications. It uses the saturation of a semiconductor optical amplifier as nonlinearity. The present work shows that, within the Reservoir Computing paradigm, all-optical computing with state-of-the-art performance is possible.

  20. Reservoir geochemistry; Geoquimica de reservatorios

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Joelma Pimentel; Rangel, Mario Duncan; Morais, Erica Tavares de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)], Emails: joelma.lopes@petrobras.com.br, mduncan@petrobras.com.br, ericat@petrobras.com.br; Aguiar, Helen G.M. de [Fundacao GORCEIX, Ouro Preto, MG (Brazil)], E-mail: helenaguiar.GORCEIX@petrobras.com.br

    2008-03-15

    Reservoir Geochemistry has many important practical applications during petroleum exploration, appraisal and development of oil fields. The most important uses are related to providing or disproving connectivity between reservoirs of a particular well or horizon. During exploration, reservoir geochemistry can indicate the direction of oil filling, suggesting the most appropriate places for drilling new wells. During production, studies of variations in composition with time and determination of proportions of commingled production from multiple zones, may also be carried out. The chemical constituents of petroleum in natural reservoirs frequently show measurable compositional variations, laterally and vertically. Due to the physical and chemical nature of petroleum changes with increasing maturity (or contribution of a second source during the filling process), lateral and vertical compositional variations exist in petroleum columns as reservoir filling is complete. Compositional variation can also be introduced by biodegradation or water washing. Once the reservoir is filled, density driven mixing and molecular diffusion tend to eliminate inherited compositional variations in an attempt to establish mechanical and chemical equilibrium in the petroleum column (England, 1990). Based on organic geochemical analysis it is possible to define these compositional variations among reservoirs, and use these data for developing of petroleum fields and for reservoir appraisal. Reservoir geochemistry offers rapid and low cost evaluation tools to aid in understanding development and production problems. Moreover, the applied methodology is relatively simple and gives reliable results, and can be performed routinely in any good geochemical laboratory at a relatively low cost. (author)

  1. The Vertical Stellar Kinematics in Face-On Barred Galaxies: Estimating the Ages of Bars

    CERN Document Server

    Gadotti, D A; Gadotti, Dimitri A.; Souza, Ronaldo E. de

    2005-01-01

    In order to perform a detailed study of the stellar kinematics in the vertical axis of bars, we obtained high signal-to-noise spectra along the major and minor axes of the bars in a sample of 14 face-on galaxies, and used them to determine the line of sight stellar velocity distribution, parameterized as Gauss-Hermite series. With these data, we developed a diagnostic tool that allows one to distinguish between recently formed and evolved bars, as well as estimate their ages, assuming that bars form in vertically thin disks, recognizable by low values for the vertical velocity dispersion sigma_z. Through N-body realizations of bar unstable disk galaxies we could also check the time scales involved in the processes which give bars an important vertical structure. We show that sigma_z in evolved bars is roughly around 100 Km/s, which translates to a height scale of about 1.4 Kpc, giving support to scenarios in which bulges form through disk material. Furthermore, the bars in our numerical simulations have value...

  2. Developing fruit-based nutritious snack bars.

    Science.gov (United States)

    da Silva, Edson P; Siqueira, Heloisa H; do Lago, Rafael Carvalho; Rosell, Cristina M; Vilas Boas, Eduardo V de Barros

    2014-01-15

    Marolo (Annona crassiflora Mart) is a typical savannah fruit that is very nutritious and highly appreciated. However, its consumption has been limited to fresh fruit. The objective of this study was to evaluate the potential use of marolo flour in the production of healthy snack bars to valorise this fruit and provide an alternative ready-to-eat nutritious product. Snack bars containing increasing amounts of marolo flour (5 g 100 g(-1), 10 g 100 g(-1), 15 g 100 g(-1), 20 g 100 g(-1), expressed in w/w) were produced and the physico-chemical and sensory characteristics were determined. Levels up to 20% marolo flour can be incorporated in snack bars with some minor changes in pH and moisture content but with an increase of 2.4-fold in dietary fibre content and also 1.3-fold of vitamin C, minerals and antioxidant activity. In addition, up to 10% marolo flour improves significantly the sensory properties of the snack bars, namely appearance, taste, texture and overall acceptance. Marolo flour can be considered an alternative flour for obtaining healthy snack bars, with increased nutritional and sensory quality. © 2013 Society of Chemical Industry.

  3. Stellar diffusion in barred spiral galaxies

    CERN Document Server

    Brunetti, Maura; Pfenniger, Daniel

    2011-01-01

    We characterize empirically the radial diffusion of stars in the plane of a typical barred disk galaxy by calculating the local spatial diffusion coefficient and diffusion time-scale for bulge-disk-halo N-body self-consistent systems which initially differ in the Safronov-Toomre-Q_T parameter. We find different diffusion scenarios that depend on the bar strength and on the degree of instability of the disk. Marginally stable disks, with Q_T \\sim 1, have two families of bar orbits with different values of angular momentum and energy, which determine a large diffusion in the corotation region. In hot disks, Q_T> 1, stellar diffusion is reduced with respect to the case of marginally stable disks. In cold models, we find that spatial diffusion is not constant in time and strongly depends on the activity of the bar, which can move stars all over the disk recurrently. We conclude that to realistically study the impact of radial migration on the chemical evolution modeling of the Milky Way the role of the bar has to...

  4. $NDK$, $\\bar{K} DN$ and $ND\\bar{D}$ molecules

    CERN Document Server

    Xiao, C W; Oset, E

    2011-01-01

    We investigate theoretically baryon systems made of three hadrons which contain one nucleon and one D meson, and in addition another meson, $\\bar{D}, K$ or $\\bar{K}$. The systems are studied using the Fixed Center Approximation to the Faddeev equations. The study is made assuming scattering of a $K$ or a $\\bar{K}$ on a $DN$ cluster, which is known to generate the $\\Lambda_c(2595)$, or the scattering of a nucleon on the $D\\bar{D}$ cluster, which has been shown to generate a hidden charm resonance named X(3700). We also investigate the configuration of scattering of $N$ on the $KD$ cluster, which is known to generate the $D_{s0}^*(2317)$. In all cases we find bound states, with the $NDK$ system, of exotic nature, more bound than the $\\bar{K} DN$.

  5. (120) and (122-bar) monazite deformation twins

    Energy Technology Data Exchange (ETDEWEB)

    Hay, R.S

    2003-10-20

    Unusual features of (120) and (122-bar) deformation twins in monazite (monoclinic LaPO{sub 4}) are described and analyzed. These features are kinks and other irregularities in (120) twins, and V-shaped indentations on (120) and (122-bar) twin planes. Twinning shear analysis suggests that the kinks are a type II deformation twin mode with shear direction ({eta}{sub 1}) of [21-bar0]. This complements previous analysis based on atom shuffling considerations. Shear strain compatibility requires extensive plastic deformation in the kink. The V-shaped indentations may be analogous to similar structures in b.c.c metal deformation twins. Deformation mechanisms that may be associated with these structures are discussed.

  6. Reservoir sedimentation; a literature survey

    NARCIS (Netherlands)

    Sloff, C.J.

    1991-01-01

    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on mathematic

  7. Reservoir sedimentation; a literature survey

    NARCIS (Netherlands)

    Sloff, C.J.

    1991-01-01

    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on mathematic

  8. An improved reservoir oxide cathode

    Science.gov (United States)

    Wang, Xiaoxia; Liao, Xianheng; Luo, Jirun; Zhao, Qinglan

    2005-09-01

    A new type of reservoir oxide cathode has been developed in IECAS. The emission characteristics of the cathode are tested. The results show the new cathode has higher emission current density and better resistance to poisoning at same operating condition compared with those of conventional reservoir oxide cathode.

  9. Reservoir sedimentation; a literature survey

    NARCIS (Netherlands)

    Sloff, C.J.

    1991-01-01

    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on

  10. FRACTURED PETROLEUM RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Abbas Firoozabadi

    1999-06-11

    The four chapters that are described in this report cover a variety of subjects that not only give insight into the understanding of multiphase flow in fractured porous media, but they provide also major contribution towards the understanding of flow processes with in-situ phase formation. In the following, a summary of all the chapters will be provided. Chapter I addresses issues related to water injection in water-wet fractured porous media. There are two parts in this chapter. Part I covers extensive set of measurements for water injection in water-wet fractured porous media. Both single matrix block and multiple matrix blocks tests are covered. There are two major findings from these experiments: (1) co-current imbibition can be more efficient than counter-current imbibition due to lower residual oil saturation and higher oil mobility, and (2) tight fractured porous media can be more efficient than a permeable porous media when subjected to water injection. These findings are directly related to the type of tests one can perform in the laboratory and to decide on the fate of water injection in fractured reservoirs. Part II of Chapter I presents modeling of water injection in water-wet fractured media by modifying the Buckley-Leverett Theory. A major element of the new model is the multiplication of the transfer flux by the fractured saturation with a power of 1/2. This simple model can account for both co-current and counter-current imbibition and computationally it is very efficient. It can be orders of magnitude faster than a conventional dual-porosity model. Part II also presents the results of water injection tests in very tight rocks of some 0.01 md permeability. Oil recovery from water imbibition tests from such at tight rock can be as high as 25 percent. Chapter II discusses solution gas-drive for cold production from heavy-oil reservoirs. The impetus for this work is the study of new gas phase formation from in-situ process which can be significantly

  11. Chalk as a reservoir

    DEFF Research Database (Denmark)

    Fabricius, Ida Lykke

    , and the best reservoir properties are typically found in mudstone intervals. Chalk mudstones vary a lot though. The best mudstones are purely calcitic, well sorted and may have been redeposited by traction currents. Other mudstones are rich in very fine grained silica, which takes up pore space and thus...... stabilizes chemically by recrystallization. This process requires energy and is promoted by temperature. This recrystallization in principle does not influence porosity, but only specific surface, which decreases during recrystallization, causing permeability to increase. The central North Sea is a warm...... intervals are to some extent cemented and cannot compact mechanically at realistic effective stresses and only deform elastically. All chalk intervals though, may react by fracturing to changes in shear stress. So where natural fractures are not prevalent, fractures may be generated hydraulically. Fractures...

  12. Reasons for reservoir effect variability

    DEFF Research Database (Denmark)

    Philippsen, Bente

    2013-01-01

    Freshwater reservoir effects can be large and highly variable. I will present my investigations into the short-term variability of the freshwater reservoir effect in two Northern German rivers. The samples analysed in this study were collected between 2007 and 2012. Reservoir ages of water samples......, aquatic plants and fish from the rivers Alster and Trave range between zero and about 3,000 radiocarbon years. The reservoir age of water DIC depends to a large extent on the origin of the water and is for example correlated with precipitation amounts. These short-term variations are smoothed out in water...... plants. Their carbon should represent an average value of the entire growth season. However, there are large reservoir age variations in aquatic plants and animals as well. These can best be explained by the multitude of carbon sources which can be utilized by aquatic organisms, and which have...

  13. Gravity observations for hydrocarbon reservoir monitoring

    NARCIS (Netherlands)

    Glegola, M.A.

    2013-01-01

    In this thesis the added value of gravity observations for hydrocarbon reservoir monitoring and characterization is investigated. Reservoir processes and reservoir types most suitable for gravimetric monitoring are identified. Major noise sources affecting time-lapse gravimetry are analyzed. The

  14. Imaging of physeal bars in children

    Energy Technology Data Exchange (ETDEWEB)

    Wang, David C. [Massachusetts General Hospital and Harvard Medical School, Department of Radiology, Boston, MA (United States); Deeney, Vincent; Roach, James W. [Children' s Hospital of Pittsburgh of UPMC, Department of Orthopedics, Pittsburgh, PA (United States); Shah, Amisha J. [Children' s Hospital of Pittsburgh of UPMC, Department of Radiology, Pittsburgh, PA (United States)

    2015-08-15

    The growth plate, also known as the physis or epiphyseal plate, is essential for longitudinal growth of bones in the immature skeleton. A variety of insults to the growth plate from trauma to infection to idiopathic causes can lead to physeal bar formation, an interruption in normal growth plate cartilage, where a bony or fibrous bridge develops between the metaphysis and epiphysis. This bridge restricts subsequent bone growth, leading to limb shortening and/or angular deformities. Early recognition of the presence of a physeal bar can help direct appropriate surgical management to restore linear growth of the bone. (orig.)

  15. BAR FREGOLI [Material gráfico

    OpenAIRE

    Fundación para la Etnografía y el Desarrollo de la Artesanía Canaria

    1990-01-01

    ANTES LOS MOSTRADORES ERAN DE MADERA, HASTA QUE EN 1998 HIZO UNA REFORMA Y LOS CAMBIÓ POR LOS ACTUALES HECHO DE CORIAN. Antiguedad: SIGLO XX BAR DE REDUCIDAS DIMENSIONES. PLANTA RECTANGULAR. BARA EN FORMA DE "L", HECHA EN CORIAN. POSEE UN PEQUEÑO BAÑO, UNA PLANCHA Y UNA CAFETERA. BIENES MUEBLES ASOCIADOS: POSEE TODAVÍA UNA MÁQUINA DE CAFÉ A GAS, MARCA "FAEMA" QUE TIENE DESDE QUE ABRIÓ EL BAR EN 1977 Y QUE TODAVÍA ES LA QUE USA. Calificación del suelo: URBANO CONSOLIDADO Clasifi...

  16. Sine-Bar Attachment For Machine Tools

    Science.gov (United States)

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  17. BAR-MOM Code and Its Application

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    BAR-MOM [1,2] code to calculate the height of the fission barrier Bf, the energy of the ground state, the compound nucleus stability by limit with respect to fission, i.e., the angular momentum(the spin value) Lmax at which the fission barrier disappears, the three principal axis moments of inertia at saddle point for a certain nucleus with atomic number Z, atomic mass number and angular momentum L for 19BAR-MOM code to include the results for Z≥102[3] by using more recent parameterization of the Thomas Fermi fission

  18. Solving Problems with The Percentage Bar

    Directory of Open Access Journals (Sweden)

    Frans van Galen

    2013-01-01

    Full Text Available At the end of primary school all children more of less know what apercentage is, but yet they often struggle with percentage problems.This article describes a study in which students of 13 and 14 years old were given a written test with percentage problems and a week later were interviewed about the way they solved some of these problems. In a teaching experiment the students were then taught the use of the percentage bar. Although the teaching experiment was very short - just one lesson - the results confirm that the percentage bar is a powerful model that deserves a central place in the teaching of percentages

  19. Sine-Bar Attachment For Machine Tools

    Science.gov (United States)

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  20. Jazz Chants Born in a Piano Bar

    Directory of Open Access Journals (Sweden)

    Caroline Graham

    2010-01-01

    Full Text Available When I first arrived in New York in the late sixties, I began teaching ESL at New York University. I didn`t really think of teaching as a profession for me. I just thought it would pay the rent so I could do what I really wanted to do which was to sing and play ragtime piano in the piano bars. When I got my first piano job in an Irish Bar it was uptown, far away from NYU so I didn`t feel it was necessary to mention this night job to my boss.

  1. M33: THE EXISTENCE OF A BAR

    Directory of Open Access Journals (Sweden)

    I. Hernández-López

    2009-01-01

    Full Text Available A signi cant fraction of galaxies in the Local Universe classi ed as unbarred in the RC3 turn out to be barred in optical and NIR wavelengths. In the Local Group the Milky Way and M31 have shown to be barred as well, this also could be the case of M33. In this paper we present the results of the Ellipse tting and bidimensional Fourier Analysis, on the R and I bands, deprojected and non-deprojected, images of M33 obtained from DSS2 and Spitzer-IRAC.

  2. B Counting at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    McGregor, Grant Duncan

    2008-12-16

    In this thesis we examine the method of counting B{bar B} events produced in the BABAR experiment. The original method was proposed in 2000, but improvements to track reconstruction and our understanding of the detector since that date make it appropriate to revisit the B Counting method. We propose a new set of cuts designed to minimize the sensitivity to time-varying backgrounds. We find the new method counts B{bar B} events with an associated systematic uncertainty of {+-} 0.6%.

  3. Newtorites in bar detectors of gravitational wave

    CERN Document Server

    Ronga, F

    2016-01-01

    The detection of particles with only gravitational interactions (Newtorites) in gravitational bar detectors was studied in 1984 by Bernard, De Rujula and Lautrup. The negative results of dark matter searches suggest to look to exotic possibilities like Newtorites. The limits obtained with the Nautilus bar detector will be presented and the possible improvements will be discussed. Since the gravitational coupling is very weak, the possible limits are very far from what is needed for dark matter, but for large masses are the best limits obtained on the Earth. An update of limits for MACRO particles will be given.

  4. Four Experiments on the Perception of Bar Charts.

    Science.gov (United States)

    Talbot, Justin; Setlur, Vidya; Anand, Anushka

    2014-12-01

    Bar charts are one of the most common visualization types. In a classic graphical perception paper, Cleveland & McGill studied how different bar chart designs impact the accuracy with which viewers can complete simple perceptual tasks. They found that people perform substantially worse on stacked bar charts than on aligned bar charts, and that comparisons between adjacent bars are more accurate than between widely separated bars. However, the study did not explore why these differences occur. In this paper, we describe a series of follow-up experiments to further explore and explain their results. While our results generally confirm Cleveland & McGill's ranking of various bar chart configurations, we provide additional insight into the bar chart reading task and the sources of participants' errors. We use our results to propose new hypotheses on the perception of bar charts.

  5. Water resources review: Ocoee reservoirs, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Cox, J.P.

    1990-08-01

    Tennessee Valley Authority (TVA) is preparing a series of reports to make technical information on individual TVA reservoirs readily accessible. These reports provide a summary of reservoir purpose and operation; physical characteristics of the reservoir and watershed; water quality conditions; aquatic biological conditions; and designated, actual and potential uses of the reservoir and impairments of those use. This reservoir status report addressed the three Ocoee Reservoirs in Polk County, Tennessee.

  6. Observation of B+ --> K0bar K+ and B0 --> K0 K0bar

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Gill, M S; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Del, P; Amo Sanchez; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Watson, A T; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Asgeirsson, D J; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Sherwood, D J; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, K Yu; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Hadavand, H K; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dvoretskii, A; Fang, F; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Mancinelli, G; Meadows, B T; Mishra, K; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nagel, M; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Merkel, J; Petzold, A; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Latour, E; Thiebaux, C; Verderi, M; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Contri, R; Lo, M; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bard, D J; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Behera, P K; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Denig, A G; Fritsch, M; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Wren, A C; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Cowan, R; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Mclachlin, S E; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M A; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Corwin, L A; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Rahimi, A M; Regensburger, J J; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Kolb, J A; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; Del, L; Buono; La Vaissière, C de; Hamon, O; Hartfiel, B L; Leruste, P; Malcles, J; Ocariz, J; Roos, L; Therin, G; Gladney, L; Biasini, M; Covarelli, R; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Aleksan, R; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Vasseur, G; Yéche, C; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Grenier, P; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Leith, D W G S; Li, S; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schilling, C J; Schwitters, R F; Izen, J M; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Lanceri, L; Vitale, L; Azzolini, V; Lopez-March, N; Martínez-Vidal, F; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Flood, K T; Hollar, J J; Kutter, P E; Mellado, B; Mihályi, A; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We report observations of the b --> d penguin-dominated decays B+ --> K0bar K+ and B0 --> K0 K0bar in approximately 350 million Upsilon(4S) --> BBbar decays collected with the BaBar detector. We measure the branching fractions B(B+ --> K0bar K+) = (1.61 +/- 0.44 +/- 0.09) * 10^-6 and B(B0 --> K0 K0bar) = (1.08 +/- 0.28 +/- 0.11) * 10^-6, and the CP-violating charge asymmetry A_{CP}(K0bar K+) = 0.10 +/- 0.26 +/- 0.03. Using a vertexing technique previously employed in several analyses of all-neutral final states containing kaons, we report the first measurement of time-dependent CP-violating asymmetries in B0 --> K0 K0bar, obtaining S = -1.28 +0.80/-0.73 +0.11/-0.16 and C = -0.40 +/- 0.41 +/- 0.06. We also report improved measurements of the branching fraction B(B0 --> K0 pi+) = (23.9 +/- 1.1 +/- 1.0) * 10^-6 and CP-violating charge asymmetry A_{CP}(K0 pi+) = -0.029 +/- 0.039 +/- 0.010.

  7. Analysis of real-time reservoir monitoring : reservoirs, strategies, & modeling.

    Energy Technology Data Exchange (ETDEWEB)

    Mani, Seethambal S.; van Bloemen Waanders, Bart Gustaaf; Cooper, Scott Patrick; Jakaboski, Blake Elaine; Normann, Randy Allen; Jennings, Jim (University of Texas at Austin, Austin, TX); Gilbert, Bob (University of Texas at Austin, Austin, TX); Lake, Larry W. (University of Texas at Austin, Austin, TX); Weiss, Chester Joseph; Lorenz, John Clay; Elbring, Gregory Jay; Wheeler, Mary Fanett (University of Texas at Austin, Austin, TX); Thomas, Sunil G. (University of Texas at Austin, Austin, TX); Rightley, Michael J.; Rodriguez, Adolfo (University of Texas at Austin, Austin, TX); Klie, Hector (University of Texas at Austin, Austin, TX); Banchs, Rafael (University of Texas at Austin, Austin, TX); Nunez, Emilio J. (University of Texas at Austin, Austin, TX); Jablonowski, Chris (University of Texas at Austin, Austin, TX)

    2006-11-01

    The project objective was to detail better ways to assess and exploit intelligent oil and gas field information through improved modeling, sensor technology, and process control to increase ultimate recovery of domestic hydrocarbons. To meet this objective we investigated the use of permanent downhole sensors systems (Smart Wells) whose data is fed real-time into computational reservoir models that are integrated with optimized production control systems. The project utilized a three-pronged approach (1) a value of information analysis to address the economic advantages, (2) reservoir simulation modeling and control optimization to prove the capability, and (3) evaluation of new generation sensor packaging to survive the borehole environment for long periods of time. The Value of Information (VOI) decision tree method was developed and used to assess the economic advantage of using the proposed technology; the VOI demonstrated the increased subsurface resolution through additional sensor data. Our findings show that the VOI studies are a practical means of ascertaining the value associated with a technology, in this case application of sensors to production. The procedure acknowledges the uncertainty in predictions but nevertheless assigns monetary value to the predictions. The best aspect of the procedure is that it builds consensus within interdisciplinary teams The reservoir simulation and modeling aspect of the project was developed to show the capability of exploiting sensor information both for reservoir characterization and to optimize control of the production system. Our findings indicate history matching is improved as more information is added to the objective function, clearly indicating that sensor information can help in reducing the uncertainty associated with reservoir characterization. Additional findings and approaches used are described in detail within the report. The next generation sensors aspect of the project evaluated sensors and packaging

  8. Data requirements and acquisition for reservoir characterization

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, S.; Chang, Ming Ming; Tham, Min.

    1993-03-01

    This report outlines the types of data, data sources and measurement tools required for effective reservoir characterization, the data required for specific enhanced oil recovery (EOR) processes, and a discussion on the determination of the optimum data density for reservoir characterization and reservoir modeling. The two basic sources of data for reservoir characterization are data from the specific reservoir and data from analog reservoirs, outcrops, and modern environments. Reservoir data can be divided into three broad categories: (1) rock properties (the container) and (2) fluid properties (the contents) and (3)interaction between reservoir rock and fluid. Both static and dynamic measurements are required.

  9. Test of bar window with internal bars free from the glass surfaces

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1998-01-01

    A sealed glazing unit with 3 horisontal and 3 vertical bars and a reference glazing without bars have been tested in a guarded hotbox. The difference in measured heat loss coefficient between the two test objects is a measure of the thermal influence of the bars. The difference in heat loss coeff...... coefficent was found to 1.9 and 1.5 W/(m2 K) respectively. The difference was larger than expected. Opening of the sealed glazing unit showed that the gap distance only was 1/3 of the expected....

  10. Measurement of the forward-backward asymmetry of $\\Lambda$ and $\\bar{\\Lambda}$ production in $p \\bar{p}$ collisions

    CERN Document Server

    Abazov, Victor Mukhamedovich; Acharya, Bannanje Sripath; Adams, Mark Raymond; Adams, Todd; Agnew, James P; Alexeev, Guennadi D; Alkhazov, Georgiy D; Alton, Andrew K; Askew, Andrew Warren; Atkins, Scott; Augsten, Kamil; Avila, Carlos A; Badaud, Frederique; Bagby, Linda F; Baldin, Boris; Bandurin, Dmitry V; Banerjee, Sunanda; Barberis, Emanuela; Baringer, Philip S; Bartlett, JFrederick; Bassler, Ursula Rita; Bazterra, Victor; Bean, Alice L; Begalli, Marcia; Bellantoni, Leo; Beri, Suman B; Bernardi, Gregorio; Bernhard, Ralf Patrick; Bertram, Iain A; Besancon, Marc; Beuselinck, Raymond; Bhat, Pushpalatha C; Bhatia, Sudeep; Bhatnagar, Vipin; Blazey, Gerald Charles; Blessing, Susan K; Bloom, Kenneth A; Boehnlein, Amber S; Boline, Daniel Dooley; Boos, Edward E; Borissov, Guennadi; Borysova, Maryna; Brandt, Andrew; Brandt, Oleg; Brock, Raymond L; Bross, Alan D; Brown, Duncan Paul; Bu, Xue-Bing; Buehler, Marc; Buescher, Volker; Bunichev, Viacheslav Yevgenyevich; Burdin, Sergey; Buszello, Claus Peter; Camacho-Perez, Enrique; Casey, Brendan Cameron Kieran; Castilla-Valdez, Heriberto; Caughron, Seth Aaron; Chakrabarti, Subhendu; Chan, Kwok Ming Leo; Chandra, Avdhesh; Chapon, Emilien; Chen, Guo; Cho, Sung-Woong; Choi, Suyong; Choudhary, Brajesh C; Cihangir, Selcuk; Claes, Daniel R; Clutter, Justace Randall; Cooke, Michael P; Cooper, William Edward; Corcoran, Marjorie D; Couderc, Fabrice; Cousinou, Marie-Claude; Cuth, Jakub; Cutts, David; Das, Amitabha; Davies, Gavin John; de Jong, Sijbrand Jan; De La Cruz-Burelo, Eduard; Deliot, Frederic; Demina, Regina; Denisov, Dmitri S; Denisov, Sergei P; Desai, Satish Vijay; Deterre, Cecile; DeVaughan, Kayle Otis; Diehl, HThomas; Diesburg, Michael; Ding, Pengfei; Dominguez, DAaron M; Dubey, Abhinav Kumar; Dudko, Lev V; Duperrin, Arnaud; Dutt, Suneel; Eads, Michael T; Edmunds, Daniel L; Ellison, John A; Elvira, VDaniel; Enari, Yuji; Evans, Harold G; Evdokimov, Anatoly V; Evdokimov, Valeri N; Faure, Alexandre; Feng, Lei; Ferbel, Thomas; Fiedler, Frank; Filthaut, Frank; Fisher, Wade Cameron; Fisk, HEugene; Fortner, Michael R; Fox, Harald; Franc, Jiri; Fuess, Stuart C; Garbincius, Peter H; Garcia-Bellido, Aran; Garcia-Gonzalez, Jose Andres; Gavrilov, Vladimir B; Geng, Weigang; Gerber, Cecilia Elena; Gershtein, Yuri S; Ginther, George E; Gogota, Olga; Golovanov, Georgy Anatolievich; Grannis, Paul D; Greder, Sebastien; Greenlee, Herbert B; Grenier, Gerald Jean; Gris, Phillipe Luc; Grivaz, Jean-Francois; Grohsjean, Alexander; Gruenendahl, Stefan; Gruenewald, Martin Werner; Guillemin, Thibault; Gutierrez, Gaston R; Gutierrez, Phillip; Haley, Joseph Glenn Biddle; Han, Liang; Harder, Kristian; Harel, Amnon; Hauptman, John Michael; Hays, Jonathan M; Head, Tim; Hebbeker, Thomas; Hedin, David R; Hegab, Hatim; Heinson, Ann; Heintz, Ulrich; Hensel, Carsten; Heredia-De La Cruz, Ivan; Herner, Kenneth Richard; Hesketh, Gavin G; Hildreth, Michael D; Hirosky, Robert James; Hoang, Trang; Hobbs, John D; Hoeneisen, Bruce; Hogan, Julie; Hohlfeld, Mark; Holzbauer, Jenny Lyn; Howley, Ian James; Hubacek, Zdenek; Hynek, Vlastislav; Iashvili, Ia; Ilchenko, Yuriy; Illingworth, Robert A; Ito, Albert S; Jabeen, Shabnam; Jaffre, Michel J; Jayasinghe, Ayesh; Jeong, Min-Soo; Jesik, Richard L; Jiang, Peng; Johns, Kenneth Arthur; Johnson, Emily; Johnson, Marvin E; Jonckheere, Alan M; Jonsson, Per Martin; Joshi, Jyoti; Jung, Andreas Werner; Juste, Aurelio; Kajfasz, Eric; Karmanov, Dmitriy Y; Katsanos, Ioannis; Kaur, Manbir; Kehoe, Robert Leo Patrick; Kermiche, Smain; Khalatyan, Norayr; Khanov, Alexander; Kharchilava, Avto; Kharzheev, Yuri N; Kiselevich, Ivan Lvovich; Kohli, Jatinder M; Kozelov, Alexander V; Kraus, James Alexander; Kumar, Ashish; Kupco, Alexander; Kurca, Tibor; Kuzmin, Valentin Alexandrovich; Lammers, Sabine Wedam; Lebrun, Patrice; Lee, Hyeon-Seung; Lee, Seh-Wook; Lee, William M; Lei, Xiaowen; Lellouch, Jeremie; Li, Dikai; Li, Hengne; Li, Liang; Li, Qi-Zhong; Lim, Jeong Ku; Lincoln, Donald W; Linnemann, James Thomas; Lipaev, Vladimir V; Lipton, Ronald J; Liu, Huanzhao; Liu, Yanwen; Lobodenko, Alexandre; Lokajicek, Milos; Lopes de Sa, Rafael; Luna-Garcia, Rene; Lyon, Adam Leonard; Maciel, Arthur KA; Madar, Romain; Magana-Villalba, Ricardo; Malik, Sudhir; Malyshev, Vladimir L; Mansour, Jason; Martinez-Ortega, Jorge; McCarthy, Robert L; Mcgivern, Carrie Lynne; Meijer, Melvin M; Melnitchouk, Alexander S; Menezes, Diego D; Mercadante, Pedro Galli; Merkin, Mikhail M; Meyer, Arnd; Meyer, Jorg Manfred; Miconi, Florian; Mondal, Naba K; Mulhearn, Michael James; Nagy, Elemer; Narain, Meenakshi; Nayyar, Ruchika; Neal, Homer A; Negret, Juan Pablo; Neustroev, Petr V; Nguyen, Huong Thi; Nunnemann, Thomas P; Hernandez Orduna, Jose de Jesus; Osman, Nicolas Ahmed; Osta, Jyotsna; Pal, Arnab; Parashar, Neeti; Parihar, Vivek; Park, Sung Keun; Partridge, Richard A; Parua, Nirmalya; Patwa, Abid; Penning, Bjoern; Perfilov, Maxim Anatolyevich; Peters, Reinhild Yvonne Fatima; Petridis, Konstantinos; Petrillo, Gianluca; Petroff, Pierre; Pleier, Marc-Andre; Podstavkov, Vladimir M; Popov, Alexey V; Prewitt, Michelle; Price, Darren; Prokopenko, Nikolay N; Qian, Jianming; Quadt, Arnulf; Quinn, Gene Breese; Ratoff, Peter N; Razumov, Ivan A; Ripp-Baudot, Isabelle; Rizatdinova, Flera; Rominsky, Mandy Kathleen; Ross, Anthony; Royon, Christophe; Rubinov, Paul Michael; Ruchti, Randal C; Sajot, Gerard; Sanchez-Hernandez, Alberto; Sanders, Michiel P; Santos, Angelo Souza; Savage, David G; Savitskyi, Mykola; Sawyer, HLee; Scanlon, Timothy P; Schamberger, RDean; Scheglov, Yury A; Schellman, Heidi M; Schott, Matthias; Schwanenberger, Christian; Schwienhorst, Reinhard H; Sekaric, Jadranka; Severini, Horst; Shabalina, Elizaveta K; Shary, Viacheslav V; Shaw, Savanna; Shchukin, Andrey A; Simak, Vladislav J; Skubic, Patrick Louis; Slattery, Paul F; Smirnov, Dmitri V; Snow, Gregory R; Snow, Joel Mark; Snyder, Scott Stuart; Soldner-Rembold, Stefan; Sonnenschein, Lars; Soustruznik, Karel; Stark, Jan; Stoyanova, Dina A; Strauss, Michael G; Suter, Louise; Svoisky, Peter V; Titov, Maxim; Tokmenin, Valeriy V; Tsai, Yun-Tse; Tsybychev, Dmitri; Tuchming, Boris; Tully, Christopher George T; Uvarov, Lev; Uvarov, Sergey L; Uzunyan, Sergey A; Van Kooten, Richard J; van Leeuwen, Willem M; Varelas, Nikos; Varnes, Erich W; Vasilyev, Igor A; Verkheev, Alexander Yurievich; Vertogradov, Leonid S; Verzocchi, Marco; Vesterinen, Mika; Vilanova, Didier; Vokac, Petr; Wahl, Horst D; Wang, Michael HLS; Warchol, Jadwiga; Watts, Gordon Thomas; Wayne, Mitchell R; Weichert, Jonas; Welty-Rieger, Leah Christine; Williams, Mark Richard James; Wilson, Graham Wallace; Wobisch, Markus; Wood, Darien Robert; Wyatt, Terence R; Xie, Yunhe; Yamada, Ryuji; Yang, Siqi; Yasuda, Takahiro; Yatsunenko, Yuriy A; Ye, Wanyu; Ye, Zhenyu; Yin, Hang; Yip, Kin; Youn, Sungwoo; Yu, Jiaming; Zennamo, Joseph; Zhao, Tianqi Gilbert; Zhou, Bing; Zhu, Junjie; Zielinski, Marek; Zieminska, Daria; Zivkovic, Lidija

    2015-01-01

    We study $\\Lambda$ and $\\bar{\\Lambda}$ production asymmetries in $p \\bar{p} \\rightarrow \\Lambda (\\bar{\\Lambda}) X$, $p \\bar{p} \\rightarrow J/\\psi \\Lambda (\\bar{\\Lambda}) X$, and $p \\bar{p} \\rightarrow \\mu^\\pm \\Lambda (\\bar{\\Lambda}) X$ events recorded by the D0 detector at the Fermilab Tevatron collider at $\\sqrt{s} = 1.96$ TeV. We find an excess of $\\Lambda$'s ($\\bar{\\Lambda}$'s) produced in the proton (antiproton) direction. This forward-backward asymmetry is measured as a function of rapidity. We confirm that the $\\bar{\\Lambda}/\\Lambda$ production ratio, measured by several experiments with various targets and a wide range of energies, is a universal function of "rapidity loss", i.e., the rapidity difference of the beam proton and the lambda.

  11. Possible strange hidden-charm pentaquarks from $\\Sigma_c^{(*)}\\bar{D}_s^*$ and $\\Xi^{(',*)}_c\\bar{D}^*$ interactions

    CERN Document Server

    Chen, Rui; Liu, Xiang

    2016-01-01

    In a one-boson-exchange model with one-pion and one-eta exchanges, we investigate possible strange hidden-charm pentaquarks produced from the $\\Lambda_c\\bar{D}_s^*$, $\\Sigma_c\\bar{D}_s^*$, $\\Sigma_c^*\\bar{D}_s^*$, $\\Xi_c\\bar{D}^*$, $\\Xi_c'\\bar{D}^*$, and $\\Xi_c^*\\bar{D}^*$ interactions with the S-D wave mixing. The Lagrangians with chiral symmetry, heavy quark symmetry, and/or hidden local symmetry are adopted to describe the interactions. With such Lagrangians, it is found that the $\\Lambda_c\\bar{D}_s^*$ and $\\Xi_c\\bar{D}^*$ interactions are forbidden. For the $\\Sigma_c\\bar{D}_s^*$ and $\\Sigma_c^*\\bar{D}_s^*$ systems where the one-pion exchange is forbidden and only one-eta exchange survives, there exist three molecular candidates at cutoffs about 3 GeV, i.e., a $\\Sigma_c\\bar{D}_s^*$ state with quantum number $I(J^P)=1(\\frac{3}{2}^-)$ and $\\Sigma_c^*\\bar{D}_s^*$ states with $1(\\frac{1}{2}^-)$ and $1(\\frac{3}{2}^-)$. For the $\\Xi_c'\\bar{D}^*$ and $\\Xi_c^*\\bar{D}^*$ systems where the one-pion exchange is allow...

  12. The BaBar Data Acquisition System

    CERN Document Server

    Scott, I; Grosso, P; Huffer, M E; O'Grady, C; Russell, J J

    1999-01-01

    The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by ana-lyzing the decays of a very large sample of B and B(Bar) mesons produced at the high luminosity PEP-II accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detec-tor subsystems. Data from the front end electronics is read into commercial VME processors via a custom "Personality Card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data is read out via a non-blocking network switch to a farm of commercial UNIX processors. The current implementation of the BaBar data acquisition sys-tem has been shown to sustain a Level 1 trigger rate of 1.3...

  13. Bar instability in disk-halo systems

    CERN Document Server

    Sellwood, J A

    2016-01-01

    We show that the exponential growth rate of a bar in a stellar disk is substantially greater when the disk is embedded in a live halo than in a rigid one having the same mass distribution. We also find that the vigor of the instability in disk-halo systems varies with the shape of the halo velocity ellipsoid. Disks in rigid halos that are massive enough to be stable by the usual criteria, quickly form bars in isotropic halos and much greater halo mass is needed to avoid a strong bar; thus stability criteria derived for disks in rigid halos do not apply when the halo is responsive. The study presented here is of an idealized family of models with near uniform central rotation and that lack an extended halo; we present more realistic models with extended halos in a companion paper. The puzzle presented by the absence of strong bars in some galaxies having gently rising inner rotation curves is compounded by the results presented here.

  14. Should an infected Nuss bar be removed?

    NARCIS (Netherlands)

    Van Renterghem, KM; von Bismarck, S; Bax, NMA; Fleer, A; Hollwarth, ME

    2005-01-01

    Background: The Nuss procedure is a minimally invasive procedure for correction of pectus excavatum. It involves insertion of a substernal metal bar. A feared complication of any implanted device is infection, which often necessitates removal. The purpose of this report is to describe the authors' e

  15. My Bar Graph Tells a Story

    Science.gov (United States)

    McMillen, Sue; McMillen, Beth

    2010-01-01

    Connecting stories to qualitative coordinate graphs has been suggested as an effective instructional strategy. Even students who are able to "create" bar graphs may struggle to correctly "interpret" them. Giving children opportunities to work with qualitative graphs can help them develop the skills to interpret, describe, and compare information…

  16. Trichomoniasis in the Hawaiian barred dove

    Science.gov (United States)

    Kocan, R.M.; Banko, W.

    1974-01-01

    Two barred doves found in the south Kona district of the island of Hawaii were diagnosed as having trichomoniasis on the basis of gross and microscopic lesions. This brings the confirmed list of columbid species susceptible to natural trichomoniasis to four and is the first report of the disease from columbids in the Hawaiian Islands.

  17. Hiding Solar-Array Bus Bars

    Science.gov (United States)

    Hufnagel, W. F.

    1983-01-01

    End terminals mounted under cells, maximizing usable illuminated area. Reconfigured solar panel bus bars placed under cells, reducing portion of module area not occupied by active silicon. Underside of last cell in string of cells serves as contact for positive bus. Negative tab of last cell in string is wrapped around from top of cell. Tabs are connected to output boards mounted under cells.

  18. A piezo-bar pressure probe

    Science.gov (United States)

    Friend, W. H.; Murphy, C. L.; Shanfield, I.

    1967-01-01

    Piezo-bar pressure type probe measures the impact velocity or pressure of a moving debris cloud. It measures pressures up to 200,000 psi and peak pressures may be recorded with a total pulse duration between 5 and 65 musec.

  19. Star formation properties in barred galaxies. III. Statistical study of bar-driven secular evolution using a sample of nearby barred spirals

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhi-Min; Wu, Hong [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Cao, Chen, E-mail: zmzhou@bao.ac.cn, E-mail: hwu@bao.ac.cn, E-mail: caochen@sdu.edu.cn [School of Space Science and Physics, Shandong University at Weihai, Weihai, Shandong 264209 (China)

    2015-01-01

    Stellar bars are important internal drivers of secular evolution in disk galaxies. Using a sample of nearby spiral galaxies with weak and strong bars, we explore the relationships between the star formation feature and stellar bars in galaxies. We find that galaxies with weak bars tend coincide with low concentrical star formation activity, while those with strong bars show a large scatter in the distribution of star formation activity. We find enhanced star formation activity in bulges toward stronger bars, although not predominantly, consistent with previous studies. Our results suggest that different stages of the secular process and many other factors may contribute to the complexity of the secular evolution. In addition, barred galaxies with intense star formation in bars tend to have active star formation in their bulges and disks, and bulges have higher star formation densities than bars and disks, indicating the evolutionary effects of bars. We then derived a possible criterion to quantify the different stages of the bar-driven physical process, while future work is needed because of the uncertainties.

  20. Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

    CERN Document Server

    Aubert, B; Bóna, M; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Gill, M S; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Del Amo-Sánchez, P; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Sherwood, D J; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Y I; Solodov, E P; Todyshev, K Y; Best, D S; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Petzold, A; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Grenier, P; Latour, E; Thiebaux, C; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Fritsch, M; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Wren, A C; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Willocq, S Y; Cowan, R; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côte, D; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Lu, M; Potter, C T; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Chauveau, J; David, P; Del Buono, L; La Vaissière, C de; Hamon, O; Hartfiel, B L; John, M J J; Malcles, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Panetta, J; Biasini, M; Covarelli, R; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Vasseur, G; Yéche, C; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Boyarski, A M; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Leith, D W G S; Li, S; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schilling, C J; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Martínez-Vidal, F; Azzolini, V; Banerjee, S; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Flood, K T; Hollar, J J; Kutter, P E; Mellado, B; Mihályi, A; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We present a search for the decay of a B0 or B0bar meson to a K*0bar K0 or K*0 K0bar final state, using a sample of approximately 232 million BBbar events collected with the BABAR detector at the PEP-II asymmetric energy e+e- collider at SLAC. The measured branching fraction is B(B0 --> K*0bar K0) + B(B0 --> K*0 K0bar) = (0.2+0.9-0.8+0.1-0.3)x 10-6. We obtain the following upper limit for the branching fraction at 90% confidence level: B(B0 --> K*0bar K0) + B(B0 --> K*0 K0bar) phi K0 from sin(2beta).

  1. Difference between the maximum empirical and field measured peak Watt values of thermal power system under highly sufficient solar conditions

    Science.gov (United States)

    Elhussain, O. A.; Abdel-Magid, T. I. M.

    2016-08-01

    Mono-Crystalline solar cell module is experimentally conducted in Khartoum, Sudan to study the difference between maximum empirical value of peak Watt and maximum value of thermal power produced in field under highly sufficient solar conditions. Field measurements are recorded for incident solar radiation, produced voltage, current and temperature at several time intervals during sun shine period. The thermal power system has been calculated using fundamental principles of heat transfer. The study shows that solar power for considered module could not attain the empirical peak power irrespective to maximum value of direct incident solar radiation and maximum temperature gained. A loss of about 6% of power can be considered as the difference between field measurements and the manufacturer's indicated empirical value. Solar cell exhibits 94% efficiency in comparison with manufacturer's provided data, and is 3'% more efficient in thermal energy production than in electrical power extraction for hot-dry climate conditions.

  2. Spike-timing-dependent plasticity enhanced synchronization transitions induced by autapses in adaptive Newman-Watts neuronal networks.

    Science.gov (United States)

    Gong, Yubing; Wang, Baoying; Xie, Huijuan

    2016-12-01

    In this paper, we numerically study the effect of spike-timing-dependent plasticity (STDP) on synchronization transitions induced by autaptic activity in adaptive Newman-Watts Hodgkin-Huxley neuron networks. It is found that synchronization transitions induced by autaptic delay vary with the adjusting rate Ap of STDP and become strongest at a certain Ap value, and the Ap value increases when network randomness or network size increases. It is also found that the synchronization transitions induced by autaptic delay become strongest at a certain network randomness and network size, and the values increase and related synchronization transitions are enhanced when Ap increases. These results show that there is optimal STDP that can enhance the synchronization transitions induced by autaptic delay in the adaptive neuronal networks. These findings provide a new insight into the roles of STDP and autapses for the information transmission in neural systems. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  3. Effect of Autaptic Activity on Intrinsic Coherence Resonance in Newman-Watts Networks of Stochastic Hodgkin-Huxley Neurons

    Science.gov (United States)

    Wang, Qi; Gong, Yubing

    2016-06-01

    In this paper, we study the effect of autaptic activity on intrinsic coherence resonance (CR) induced by channel noise in Newman-Watts (NW) networks of stochastic Hodgkin-Huxley (HH) neurons. It is found that autaptic strength and autaptic delay have a big effect on the intrinsic CR. As autaptic strength increases, there is optimal autaptic strength by which the intrinsic CR is most highly enhanced. Autaptic delay can enhance, reduce, or destroy the intrinsic CR, depending on the delay length. Moreover, there are optimal coupling strength and network randomness by which autaptic activity can most highly enhance the intrinsic CR. These results show that autaptic activity has different effects on the intrinsic CR in the neuronal networks, and it can most highly enhance the intrinsic CR at optimal coupling strength and network randomness. These findings could find potential implications of channel noise and autaptic activity for the information processing and transmission in neural systems.

  4. Optimization of Intrinsic Stochastic Resonance in Adaptive Newman-Watts Network of Channel Blocked Hodgkin-Huxley Neurons

    Science.gov (United States)

    Wang, Qi; Gong, Yubing; Wu, Yanan

    2014-08-01

    In this paper, we study stochastic resonance (SR) induced by channel noise in adaptive weighted Newman-Watts networks of Hodgkin-Huxley neurons with channel blocking (CB). It is found that the intrinsic SR is dependent on adaptive coupling and is strongly enhanced when the changing rate of adaptive coupling is optimal, and this phenomenon is independent of sodium and potassium CB levels. As CB increases, the channel noise for SR decreases, but the strength of intrinsic SR nearly does not change in the presence of adaptive coupling, which is different from the case for fixed coupling. These results show that intrinsic SR can be enhanced and optimized by adaptive coupling, and CB's effect on the intrinsic SR can be reduced by adaptive coupling. This implies that adaptive coupling could more efficiently improve the time precision of information processing in neural systems.

  5. A reservoir simulation approach for modeling of naturally fractured reservoirs

    Directory of Open Access Journals (Sweden)

    H. Mohammadi

    2012-12-01

    Full Text Available In this investigation, the Warren and Root model proposed for the simulation of naturally fractured reservoir was improved. A reservoir simulation approach was used to develop a 2D model of a synthetic oil reservoir. Main rock properties of each gridblock were defined for two different types of gridblocks called matrix and fracture gridblocks. These two gridblocks were different in porosity and permeability values which were higher for fracture gridblocks compared to the matrix gridblocks. This model was solved using the implicit finite difference method. Results showed an improvement in the Warren and Root model especially in region 2 of the semilog plot of pressure drop versus time, which indicated a linear transition zone with no inflection point as predicted by other investigators. Effects of fracture spacing, fracture permeability, fracture porosity, matrix permeability and matrix porosity on the behavior of a typical naturally fractured reservoir were also presented.

  6. Study of psi(2S) Decays to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} and Search for p bar{p} Threshold Enhancements

    CERN Document Server

    Alexander, J P; Das, S; Ehrlich, R; Fields, L; Gibbons, L; Gray, S W; Hartill, D L; Heltsley, B K; Kreinick, D L; Kuznetsov, V E; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Sun, W M; Yelton, J; Rubin, P; Lowrey, N; Mehrabyan, S; Selen, M; Wiss, J; Adams, S; Kornicer, M; Mitchell, R E; Shepherd, M R; Tarbert, C M; Besson, D; Pedlar, T K; Xavier, J; Cronin-Hennessy, D; Hietala, J; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Tomaradze, A; Xiao, T; Brisbane, S; Libby, J; Martin, L; Powell, A; Spradlin, P; Wilkinson, G; Mendez, H; Ge, J Y; Miller, D H; Shipsey, I P J; Xin, B; Adams, G S; Hu, D; Moziak, B; Napolitano, J; Ecklund, K M; Insler, J; Muramatsu, H; Park, C S; Pearson, L J; Thorndike, E H; Yang, F; Ricciardi, S; Thomas, C; Artuso, M; Blusk, S; Mountain, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M; Bonvicini, G; Cinabro, D; Lincoln, A; Smith, M J; Zhou, P; Zhu, J; Naik, P; Rademacker, J; Asner, D M; Edwards, K W; Randrianarivony, K; Tatishvili, G; Briere, R A; Vogel, H; Onyisi, P U E; Rosner, J L

    2010-01-01

    The decays of psi(2S) into gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been studied with the CLEO-c detector using a sample of 24.5 million psi(2S) events obtained from e^+e^- annihilations at sqrt{s} = 3686 MeV. The data show evidence for the excitation of several N^* resonances in p pi^0 and p eta channels in pi^0 p bar{p} and eta p bar{p} decays, and f_2 states in gamma p bar{p} decay. Branching fractions for decays of psi(2S) to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been determined. No evidence for p bar{p} threshold enhancements was found in the reactions psi(2S)-> X p bar{p}, where X = gamma, pi^0, eta. We do, however, find confirming evidence for a p bar{p} threshold enhancement in J/psi-> gamma p bar{p} as previously reported by BES.

  7. The Morphology of Collisionless Galactic Rings Exterior to Evolving Bars

    CERN Document Server

    Bagley, Micaela; Quillen, Alice C

    2008-01-01

    The morphology of the outer rings of early-type spiral galaxies is compared to integrations of massless collisionless particles initially in nearly circular orbits. Particles are perturbed by a quadrupolar gravitational potential corresponding to a growing and secularly evolving bar. We find that outer rings with R1R2 morphology and pseudorings are exhibited by the simulations even though they lack gaseous dissipation. Simulations with stronger bars form pseudorings earlier and more quickly than those with weaker bars. We find that the R1 ring, perpendicular to the bar, is fragile and dissolves after a few bar rotation periods if the bar pattern speed increases by more than ~ 8%, bar strength increases (by >~ 140%) after bar growth, or the bar is too strong (Q_T>0.3). If the bar slows down after formation, pseudoring morphology persists and the R2 ring perpendicular to the bar is populated due to resonance capture. The R2 ring remains misaligned with the bar and increases in ellipticity as the bar slows down....

  8. Some Comments on the Branching Ratios for n-bar p Annihilation into pipi, KK-bar , and pieta Channels

    Science.gov (United States)

    Kudryavtsev, A. E.

    2000-11-01

    We give some remarks on the $\\bar n p$-partial branching ratios in flight at low momenta of antineutron, measured by OBELIX collaboration. The comparison is made to the known branching ratios from the $p \\bar p$-atomic states. The branching ratio for the reaction $\\bar n p \\to \\pi^+\\pi^0$ is found to be suppressed in comparison to what follows from the $ p \\bar p$-data. It is also shown, that there is no so called dynamic I=0-amplitude suppression for the process $N\\bar N \\to K\\bar K$.

  9. X(5568) as a {su}\\bar{d}\\bar{b} tetraquark in a simple quark model

    Science.gov (United States)

    Stancu, Fl

    2016-10-01

    The S-wave eigenstates of tetraquarks of type {su}\\bar{d}\\bar{b} with J P = 0+, 1+ and 2+ are studied within a simple quark model with chromomagnetic interaction and effective quark masses extracted from meson and baryon spectra. It is tempting to see if this spectrum can accommodate the new narrow structure X(5568), observed by the DØ Collaboration, but not confirmed by the LHCb Collaboration. If it exists, such a tetraquark is a system with four different flavors and its study can improve our understanding of multiquark systems. The presently calculated mass of X(5568) agrees quite well with the experimental value of the DØ Collaboration. Predictions are also made for the spectrum of the charmed partner {su}\\bar{d}\\bar{c}. However we are aware of the difficulty of extracting effective quark masses, from mesons and baryons, to be used in multiquark systems.

  10. Nucleon strange $s\\bar s$ asymmetry to the $\\Lambda/\\bar\\Lambda$ fragmentation

    CERN Document Server

    Chi, Yujie; Ma, Bo-Qiang

    2014-01-01

    The difference between the $\\Lambda$ and $\\bar \\Lambda$ longitudinal spin transfers in the semi-inclusive deep inelastic scattering process is intensively studied. The study is performed in the current fragmentation region, by considering the intermediate hyperon decay processes and sea quark fragmentation processes, while the strange sea $s\\bar s$ asymmetry in the nucleon is taken into account. The calculation in the light-cone quark-diquark model shows that the strange sea asymmetry gives a proper trend to the difference between the $\\Lambda$ and $\\bar \\Lambda$ longitudinal spin transfers. When considering the nonzero final hadron transverse momentum, our results can explain the COMPASS data reasonably. The nonzero final hadron transverse momentum is interpreted as a natural constraint to the final hadron $z$ range where the longitudinal spin transfer is more sensitive to the strange sea $s\\bar s$ asymmetry.

  11. THE SURDUC RESERVOIR (ROMANIA

    Directory of Open Access Journals (Sweden)

    Niculae Iulian TEODORESCU

    2008-06-01

    Full Text Available The Surduc reservoir was projected to ensure more water when water is scarce and to thus provide especially the city Timisoara, downstream of it with water.The accumulation is placed on the main affluent of the Bega river, Gladna in the upper part of its watercourse.The dam behind which this accumulation was created is of a frontal type made of enrochements with a masque made of armed concrete on the upstream part and protected/sustained by grass on the downstream. The dam is 130m long on its coping and a constructed height of 34 m. It is also endowed with spillway for high water and two bottom outlets formed of two conduits, at the end of which is the microplant. The second part of my paper deals with the hydrometric analysis of the Accumulation Surduc and its impact upon the flow, especially the maximum run-off. This influence is exemplified through the high flood from the 29th of July 1980, the most significant flood recorded in the basin with an apparition probability of 0.002%.

  12. Calculations of bar K-nuclear quasi-bound states using chiral bar KN amplitudes

    Science.gov (United States)

    Mareš, J.; Barnea, N.; Cieplý, A.; Friedman, E.; Gal, A.; Gazda, D.

    2014-03-01

    We review our recent calculations of K- quasi-bound states in nuclear systems using subthreshold energy dependent chiral bar KN amplitudes. Strong energy dependence of the scattering amplitudes requires self-consistent evaluation of the involved bar KN interactions. In view of sizable widths predicted by our calculations, an unambiguous identification of K--nuclear quasi-bound states in ongoing experimental searches would be difficult.

  13. Rare kaon decays: $K^{+} → ^{+} \\bar{}$ and future

    Indian Academy of Sciences (India)

    Bipul Bhuyan

    2004-03-01

    The experimental progress in the search for $K^{+} → ^{+} \\bar{}$ will be presented in this paper. Also the physics potential of the proposed BNL experiment to search for $K_{L}^{0} → ^{0} \\bar{}$ (KOPIO) will be discussed.

  14. Verification of Properties of Concrete Reinforcement Bars: Nigeria ...

    African Journals Online (AJOL)

    Nekky Umera

    from the producing mills but purchase them as groups of single bars from the ... determining the extent to which they conform to the requirements of. International ... the most widely used bar sizes for the local concrete reinforcement needs.

  15. Bond tests of fiberglass-reinforced plastic bars in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Larralde, J.; Silva-Rodriquez, R.; Burdette, J.; Harris, B. (Drexel Univ., Philadelphia, PA (United States). Civil and Architectural Engineering Dept.)

    1994-07-01

    Fiberglass Reinforced Plastic (FRP) bars for concrete reinforcement have been commercially available for several years. The main advantage of such bar relative to the conventional steel reinforcing bars is their resistance to corrosion. The reinforced plastic bars are slightly different from the conventional steel bars both geometrically and mechanically. Thus, research is needed to understand their behavior and to be able to use them in concrete reinforcement with adequate reliability. Bond strength of reinforced plastic bars in concrete is one of the mechanical and behavioral differences with the steel bars. This paper presents the results of pullout and beam tests conducted to determine the bond stress-slip behavior of FRP bars in concrete.

  16. Osmundiron, cleaved iron bars and slags (Osmundjern, kloder og kalotslagger)

    DEFF Research Database (Denmark)

    Buchwald, Vagn Fabritius

    1996-01-01

    Investigation of so-called Osmund iron, iron bars and slags from iron production in the medieval ages.......Investigation of so-called Osmund iron, iron bars and slags from iron production in the medieval ages....

  17. $\\bar{D}\\Sigma^*_c$ and $\\bar{D}^*\\Sigma_c$ interactions and LHCb pentaquarks

    CERN Document Server

    He, Jun

    2016-01-01

    Recently, LHCb collaboration reported the observation of two hidden-charmed resonances $P_c(4380)$ and $P_c(4450)$ consistent with hidden-charmed pentaquarks. We perform a dynamical investigation about the $\\bar{D}\\Sigma_c^*(2520)$ and $\\bar{D}^*\\Sigma_c(2455)$ interactions which are described by the meson exchanges in a quasipotential Bethe-Salpeter equation approach. Two poles around $4450$ and $4390$ MeV are produced from the $\\bar{D}^*\\Sigma_c(2455)$ interaction with spin parities $3/2^-$ and $5/2^+$, respectively. The peak for $5/2^+$ state has a comparable hight as that of $3/2^-$ state in the $J/\\psi p$ invariant mass spectrum. Another bound state with spin-parity $J^P=3/2^-$ is produced from the $\\bar{D}\\Sigma^*_c(2520)$ interaction. Such results suggest that the narrower LHCb pentaquark $P_c(4450)$ can be well interpreted as a $5/2^+$ $\\bar{D}^*\\Sigma_c(2455)$ molecular state while the $P_c(4380)$ is a $3/2^-$ $\\bar{D}^*\\Sigma_c(2455)$ molecular state mixed with other secondary origins.

  18. Bar pattern speeds in CALIFA galaxies: I. Fast bars across the Hubble sequence

    CERN Document Server

    Aguerri, J A L; Falcón-Barroso, J; Amorin, A; Barrera-Ballesteros, J; Fernandes, R Cid; García-Benito, R; García-Lorenzo, B; Delgado, R M González; Husemann, B; Kalinova, V; Lyubenova, M; Marino, R A; Márquez, I; Mast, D; Pérez, E; Sánchez, S F; van de Ven, G; Walcher, C J; Backsmann, N; Cortijo-Ferrero, C; Bland-Hawthorn, J; del Olmo, A; Iglesias-Páramo, J; Pérez, I; Sánchez-Blázquez, P; Wisotzki, L; Ziegler, B

    2015-01-01

    The bar pattern speed ($\\Omega_{\\rm b}$) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring $\\Omega_{\\rm b}$. The non-parametric method proposed by Tremaine \\& Weinberg (1984; TW) and based on stellar kinematics is the most accurate. This method has been applied so far to 17 galaxies, most of them SB0 and SBa types. We have applied the TW method to a new sample of 15 strong and bright barred galaxies, spanning a wide range of morphological types from SB0 to SBbc. Combining our analysis with previous studies, we investigate 32 barred galaxies with their pattern speed measured by the TW method. The resulting total sample of barred galaxies allows us to study the dependence of $\\Omega_{\\rm b}$ on galaxy properties, such as the Hubble type. We measured $\\Omega_{\\rm b}$ using the TW method on the stellar velocity maps provided by the integral-field spectroscopy data from the CALIFA survey. Integral-field data solve the problem...

  19. 2010 Fresno Reservoir Sedimentation Survey

    Data.gov (United States)

    US Bureau of Reclamation, Department of the Interior — The Bureau of Reclamation (Reclamation) surveyed Fresno Reservoir in June of 2010 to develop a topographic map and compute a storage-elevation relationship...

  20. 2011 Groundhog Reservoir Bathymetric Contours

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey performed a bathymetric survey of Groundhog Reservoir using a man-operated boat-mounted multibeam echo sounder integrated with a global...

  1. Glendo Reservoir 2003 Sedimenation Survey

    Data.gov (United States)

    US Bureau of Reclamation, Department of the Interior — The Bureau of Reclamation (Reclamation) surveyed Glendo Reservoir in May and July of 2003 and January 2005 to develop a new topographic map and compute a present...

  2. Understanding the True Strimulated Reservoir Volume in Shale Reservoirs

    KAUST Repository

    Hussain, Maaruf

    2017-06-06

    Successful exploitation of shale reservoirs largely depends on the effectiveness of hydraulic fracturing stimulation program. Favorable results have been attributed to intersection and reactivation of pre-existing fractures by hydraulically-induced fractures that connect the wellbore to a larger fracture surface area within the reservoir rock volume. Thus, accurate estimation of the stimulated reservoir volume (SRV) becomes critical for the reservoir performance simulation and production analysis. Micro-seismic events (MS) have been commonly used as a proxy to map out the SRV geometry, which could be erroneous because not all MS events are related to hydraulic fracture propagation. The case studies discussed here utilized a fully 3-D simulation approach to estimate the SRV. The simulation approach presented in this paper takes into account the real-time changes in the reservoir\\'s geomechanics as a function of fluid pressures. It is consisted of four separate coupled modules: geomechanics, hydrodynamics, a geomechanical joint model for interfacial resolution, and an adaptive re-meshing. Reservoir stress condition, rock mechanical properties, and injected fluid pressure dictate how fracture elements could open or slide. Critical stress intensity factor was used as a fracture criterion governing the generation of new fractures or propagation of existing fractures and their directions. Our simulations were run on a Cray XC-40 HPC system. The studies outcomes proved the approach of using MS data as a proxy for SRV to be significantly flawed. Many of the observed stimulated natural fractures are stress related and very few that are closer to the injection field are connected. The situation is worsened in a highly laminated shale reservoir as the hydraulic fracture propagation is significantly hampered. High contrast in the in-situ stresses related strike-slip developed thereby shortens the extent of SRV. However, far field nature fractures that were not connected to

  3. Orthogonal Vertical Velocity Dispersion Distributions Produced by Bars

    Science.gov (United States)

    Du, Min; Shen, Juntai; Debattista, Victor P.; de Lorenzo-Cáceres, Adriana

    2017-02-01

    In barred galaxies, the contours of stellar velocity dispersions (σ) are generally expected to be oval and aligned with the orientation of bars. However, many double-barred (S2B) galaxies exhibit distinct σ peaks on the minor axis of the inner bar, which we termed “σ-humps,” while two local σ minima are present close to the ends of inner bars, i.e., “σ-hollows.” Analysis of numerical simulations shows that {σ }z-humps or hollows should play an important role in generating the observed σ-humps+hollows in low-inclination galaxies. In order to systematically investigate the properties of {σ }z in barred galaxies, we apply the vertical Jeans equation to a group of well-designed three-dimensional bar+disk(+bulge) models. A vertically thin bar can lower {σ }z along the bar and enhance it perpendicular to the bar, thus generating {σ }z-humps+hollows. Such a result suggests that {σ }z-humps+hollows can be generated by the purely dynamical response of stars in the presence of a sufficiently massive, vertically thin bar, even without an outer bar. Using self-consistent N-body simulations, we verify the existence of vertically thin bars in the nuclear-barred and S2B models that generate prominent σ-humps+hollows. Thus, the ubiquitous presence of σ-humps+hollows in S2Bs implies that inner bars are vertically thin. The addition of a bulge makes the {σ }z-humps more ambiguous and thus tends to somewhat hide the {σ }z-humps+hollows. We show that {σ }z may be used as a kinematic diagnostic of stellar components that have different thicknesses, providing a direct perspective on the morphology and thickness of nearly face-on bars and bulges with integral field unit spectroscopy.

  4. Development of omega-3 rich energy bar with flaxseed

    OpenAIRE

    Mridula, D.; Singh, K. K.; Barnwal, P.

    2011-01-01

    Energy bar sample were prepared with different levels of flaxseed (0–20%) in addition to cereals and pulses with varying levels of sweeteners (45, 50, and 55%) to deliver a nutritious food to the consumer. The developed bars were evaluated for textural, colour, nutritional quality, sensory attributes and total microbial load. Different levels of flaxseed and sweeteners significantly affected the hue and chroma values of the energy bar. In general the level of flaxseed in energy bar did not af...

  5. Possible $B^{(\\ast)} \\bar{K}$ hadronic molecule state

    CERN Document Server

    Xiao, Cheng-Jian

    2016-01-01

    In the present work, we estimate the decays of the $X(5568)$ and $X(5616)$ in a $B \\bar{K}$ and a $B^\\ast \\bar{K}$ $S$-wave hadronic molecule scenarios, respectively, which may corresponding to the structure observed by D0 Collaboration. Our estimation indicates both $B\\bar{K}$ and $B^\\ast \\bar{K}$ hadronic molecule decay widths could explain the experimental data in a proper model parameter range.

  6. REMOVAL OF CHEMICAL AND MICROBIAL CONTAMINANTS IN DRINKING WATER - WATTS PREMIER M-2400 POINT-OF-ENTRY REVERSE OSMOSIS DRINKINGWATER TREATMENT SYSTEM

    Science.gov (United States)

    The Watts Premier M-2400 POE RO Drinking Water Treatment System was tested at the NSF Drinking Water Treatment Systems Laboratory for removal of the viruses fr and MS2, the bacteria Brevundimonas diminuta, and chemicals aldicarb, benzene, cadmium, carbofuran, cesium, chl...

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: WATTS PREMIER M-SERIES M-15,000 REVERSE OSMOSIS TREATMENT SYSTEM

    Science.gov (United States)

    Verification testing of the Watts Premier M-Series M-15,000 RO Treatment System was conducted over a 31-day period from April 26, 2004, through May 26, 2004. This test was conducted at the Coachella Valley Water District (CVWD) Well 7802 in Thermal, California. The source water...

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: WATTS PREMIER M-SERIES M-15,000 REVERSE OSMOSIS TREATMENT SYSTEM

    Science.gov (United States)

    Verification testing of the Watts Premier M-Series M-15,000 RO Treatment System was conducted over a 31-day period from April 26, 2004, through May 26, 2004. This test was conducted at the Coachella Valley Water District (CVWD) Well 7802 in Thermal, California. The source water...

  9. REMOVAL OF CHEMICAL AND MICROBIAL CONTAMINANTS IN DRINKING WATER - WATTS PREMIER M-2400 POINT-OF-ENTRY REVERSE OSMOSIS DRINKINGWATER TREATMENT SYSTEM

    Science.gov (United States)

    The Watts Premier M-2400 POE RO Drinking Water Treatment System was tested at the NSF Drinking Water Treatment Systems Laboratory for removal of the viruses fr and MS2, the bacteria Brevundimonas diminuta, and chemicals aldicarb, benzene, cadmium, carbofuran, cesium, chl...

  10. One-Watt level mid-IR output, singly resonant, continuous-wave optical parametric oscillator pumped by a monolithic diode laser

    NARCIS (Netherlands)

    Nieuwenhuis, Albert F.; Lee, Christopher James; Sumpf, Bernd; van der Slot, Petrus J.M.; Erbert, Götz; Boller, Klaus J.

    2010-01-01

    We report more than 1.1 Watt of idler power at 3373 nm in a singly resonant optical parametric oscillator (SRO), directly pumped by a single-frequency monolithic tapered diode laser. The SRO is based on a periodically poled MgO:LiNbO3 crystal in a four mirror cavity and is excited by 8.05 W of 1062

  11. Optimization of the Infrastructure of Reinforced Concrete Reservoirs by a Particle Swarm Algorithm

    Directory of Open Access Journals (Sweden)

    Kia Saeed

    2015-03-01

    Full Text Available Optimization techniques may be effective in finding the best modeling and shapes for reinforced concrete reservoirs (RCR to improve their durability and mechanical behavior, particularly for avoiding or reducing the bending moments in these structures. RCRs are one of the major structures applied for reserving fluids to be used in drinking water networks. Usually, these structures have fixed shapes which are designed and calculated based on input discharges, the conditions of the structure's topology, and geotechnical locations with various combinations of static and dynamic loads. In this research, the elements of reservoir walls are first typed according to the performance analyzed; then the range of the membrane based on the thickness and the minimum and maximum cross sections of the bar used are determined in each element. This is done by considering the variable constraints, which are estimated by the maximum stress capacity. In the next phase, based on the reservoir analysis and using the algorithm of the PARIS connector, the related information is combined with the code for the PSO algorithm, i.e., an algorithm for a swarming search, to determine the optimum thickness of the cross sections for the reservoir membrane’s elements and the optimum cross section of the bar used. Based on very complex mathematical linear models for the correct embedding and angles related to achain of peripheral strengthening membranes, which optimize the vibration of the structure, a mutual relation is selected between the modeling software and the code for a particle swarm optimization algorithm. Finally, the comparative weight of the concrete reservoir optimized by the peripheral strengthening membrane is analyzed using common methods. This analysis shows a 19% decrease in the bar’s weight, a 20% decrease in the concrete’s weight, and a minimum 13% saving in construction costs according to the items of a checklist for a concrete reservoir at 10,000 m3.

  12. Chickamauga reservoir embayment study - 1990

    Energy Technology Data Exchange (ETDEWEB)

    Meinert, D.L.; Butkus, S.R.; McDonough, T.A.

    1992-12-01

    The objectives of this report are three-fold: (1) assess physical, chemical, and biological conditions in the major embayments of Chickamauga Reservoir; (2) compare water quality and biological conditions of embayments with main river locations; and (3) identify any water quality concerns in the study embayments that may warrant further investigation and/or management actions. Embayments are important areas of reservoirs to be considered when assessments are made to support water quality management plans. In general, embayments, because of their smaller size (water surface areas usually less than 1000 acres), shallower morphometry (average depth usually less than 10 feet), and longer detention times (frequently a month or more), exhibit more extreme responses to pollutant loadings and changes in land use than the main river region of the reservoir. Consequently, embayments are often at greater risk of water quality impairments (e.g. nutrient enrichment, filling and siltation, excessive growths of aquatic plants, algal blooms, low dissolved oxygen concentrations, bacteriological contamination, etc.). Much of the secondary beneficial use of reservoirs occurs in embayments (viz. marinas, recreation areas, parks and beaches, residential development, etc.). Typically embayments comprise less than 20 percent of the surface area of a reservoir, but they often receive 50 percent or more of the water-oriented recreational use of the reservoir. This intensive recreational use creates a potential for adverse use impacts if poor water quality and aquatic conditions exist in an embayment.

  13. Capacity sharing of water reservoirs

    Science.gov (United States)

    Dudley, Norman J.; Musgrave, Warren F.

    1988-05-01

    The concept of a water use property right is developed which does not apply to water volumes as such but to a share of the capacity (not contents) of river storage reservoirs and their inflows. The shareholders can withdraw water from their share over time in accordance with their preferences for stability of water deliveries. The reservoir authority does not manage reservoir releases but keeps record of individual shareholder's withdrawals and net inflows to monitor the quantity of water in each shareholder's capacity share. A surplus of total reservoir contents over the sum of the contents of the individual shareholder's capacity shares will accrue over time. Two different criteria for its periodic distribution among shareholders are compared. A previous paper Dudley (this issue(b)) noted a loss of short-run economic efficiency as reservoir and farm management decision making become separated. This is largely overcome by capacity sharing which allows each user to integrate the management of their portion of the reservoir and their farming operations. The nonattenuated nature of the capacity sharing water rights also promotes long-run economic efficiency.

  14. Access to Bathtub Grab Bars: Evidence of a Policy Gap

    Science.gov (United States)

    Birkett, Nicholas; Nair, Rama; Murphy, Maureen; Roberge, Ginette; Lockett, Donna

    2006-01-01

    This paper examines access to bathtub grab bars in privately and publicly owned apartment buildings and explores the profile of seniors who have access to bathtub grab bars. Results indicate that bathtub grab bars were significantly more prevalent in apartments that were publicly owned (91.3%) as compared to privately owned (37.8%) (p lesser than…

  15. [Storage and use of antioxidants in cereal and peanut bars].

    Science.gov (United States)

    Estévez, A M; Escobar, B; Tepper, A; Castillo, E

    1998-06-01

    The use of fatty materials in cereal bars gives to them a good energetic value; however they are exposed to oxidative rancidity which can affect their acceptability and nutritional value. So, the purpose of this research was to determine the stability in storage and the effect of antioxidants on three tipes of cereal bars with peanuts. Cereal bars with 18% of peanuts were prepared, with and without antioxidants (BHA + BHT; 100 ppm). Bars were packed in polyprolpilene-aluminium-polythilene bags, and were stored at room temperature (18-20 degrees C) for 90 days. Each 30 days, analysis of water activity (Aw); moisture content, peroxides index, sensory quality (flavor, aroma and appearance) and acceptability, were carried out. Moisture content was similar in all bars (7.6-9.6%) and Aw was higher in the bar which contained expanded amaranthus and antioxidant. At the 60th day of storage, the peroxide values were lower in the bars with antioxidants; only the bar which included expanded amaranthus showed significant differences (16.4 meq/kg in the bar with antioxidant and 25.7 meq/kg for the control bar). The sensory parameters were kept within normal status without differences between the bars with antioxidants and the control ones, along all the storage period. Shelf life of bars CM1 and CM2 was at least of 60 days when they are kept at 18-20 degrees C.

  16. 33 CFR 13.01-10 - Gold and silver bars.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Gold and silver bars. 13.01-10... DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-10 Gold and silver bars. No person shall receive more than one Gold Lifesaving Medal and...

  17. 21 CFR 886.5800 - Ophthalmic bar reader.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar reader. 886.5800 Section 886.5800...) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5800 Ophthalmic bar reader. (a) Identification. An ophthalmic bar reader is a device that consists of a magnifying lens intended for use by a...

  18. Observational Evidence of Secular Evolution in Barred Galaxies

    NARCIS (Netherlands)

    Perez, I.; Sanchez-Blazquez, P.; Zurita, A.; Funes, JG; Corsini, EM

    2008-01-01

    We report preliminary results of the derived stellar population metallicities and ages along the bars of a sample of 20 barred galaxies. We find that some galaxies show a positive radial bar metallicity gradient, implying that there has been a chemical enrichment and so that the star formation has l

  19. 10 CFR 39.49 - Uranium sinker bars.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Uranium sinker bars. 39.49 Section 39.49 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.49 Uranium sinker bars. The licensee may use a uranium sinker bar in well logging applications only if it is...

  20. A Reading PR Reference for Bar Executive Staff and Officers.

    Science.gov (United States)

    Georgia State Bar, Atlanta.

    This manual provides information to assist bar association staff and officers in explaining the role and function of the bar and in dealing with critical public-relations problems. Sections discuss the use and value of public relations, public relations and the role of the bar, public-relations problems, and major public-opinion problems…

  1. Reservoir characterization of Pennsylvanian Sandstone Reservoirs. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1992-09-01

    This annual report describes the progress during the second year of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description and scale-up procedures; (ii) outcrop investigation; (iii) in-fill drilling potential. The first section describes the methods by which a reservoir can be characterized, can be described in three dimensions, and can be scaled up with respect to its properties, appropriate for simulation purposes. The second section describes the progress on investigation of an outcrop. The outcrop is an analog of Bartlesville Sandstone. We have drilled ten wells behind the outcrop and collected extensive log and core data. The cores have been slabbed, photographed and the several plugs have been taken. In addition, minipermeameter is used to measure permeabilities on the core surface at six inch intervals. The plugs have been analyzed for the permeability and porosity values. The variations in property values will be tied to the geological descriptions as well as the subsurface data collected from the Glen Pool field. The third section discusses the application of geostatistical techniques to infer in-fill well locations. The geostatistical technique used is the simulated annealing technique because of its flexibility. One of the important reservoir data is the production data. Use of production data will allow us to define the reservoir continuities, which may in turn, determine the in-fill well locations. The proposed technique allows us to incorporate some of the production data as constraints in the reservoir descriptions. The technique has been validated by comparing the results with numerical simulations.

  2. $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ As the Lightest $c\\bar c s \\bar s$ State

    CERN Document Server

    Lebed, Richard F

    2016-01-01

    The state $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ has recently been demoted by the Particle Data Group from its previous status as the conventional $c\\bar c$ $2 {}^3P_0$ state, largely due to the absence of expected $D\\bar D$ decays. We propose that $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ is actually the lightest $c\\bar c s \\bar s$ state, and calculate the spectrum of such states using the diquark model, identifying many of the observed charmoniumlike states that lack open-charm decay modes as $c\\bar c s \\bar s$. Among other results, we argue that $Y(4140)$ is a $J^{PC} = 1^{++}$ $c\\bar c s \\bar s$ state that has been not been seen in two-photon fusion largely as a consequence of the Landau-Yang theorem.

  3. Petroleum reservoir data for testing simulation models

    Energy Technology Data Exchange (ETDEWEB)

    Lloyd, J.M.; Harrison, W.

    1980-09-01

    This report consists of reservoir pressure and production data for 25 petroleum reservoirs. Included are 5 data sets for single-phase (liquid) reservoirs, 1 data set for a single-phase (liquid) reservoir with pressure maintenance, 13 data sets for two-phase (liquid/gas) reservoirs and 6 for two-phase reservoirs with pressure maintenance. Also given are ancillary data for each reservoir that could be of value in the development and validation of simulation models. A bibliography is included that lists the publications from which the data were obtained.

  4. A train for the bus(bars)

    CERN Multimedia

    CERN Bulletin

    2013-01-01

    On 8 April, the first SMACC (Superconducting Magnets and Circuits Consolidation) teams began work in the LHC tunnel. They are responsible for opening the interconnects between the magnets, laying the groundwork for the series of operations that will be performed by the team riding the ‘consolidation train’.   A technician installs the machine tool that allows them to prepare the surface of the section of the bar where the shunt will be fixed. The LHC’s 1,670 dipoles and quadrupoles are powered by power converters and connected by copper 'busbars’. The superconducting cables run through these bars, carrying a current of up to 11,850 amps. Six superconducting cables meet at each interconnect, where they are held together by a soldered (see box) electrical connection sandwiched between two pieces of copper, forming the splice between the busbars of the neighbouring magnets. The integrity of the electrical circuit is depen...

  5. Solving Problems with The Percentage Bar

    Directory of Open Access Journals (Sweden)

    Frans van Galen

    2013-01-01

    Full Text Available At the end of primary school all children more of less know what a percentage is, but yet they often struggle with percentage problems. This article describes a study in which students of 13 and 14 years old were given a written test with percentage problems and a week later were interviewed about the way they solved some of these problems. In a teaching experiment the students were then taught the use of the percentage bar. Although the teaching experiment was very short - just one lesson  -  the results confirm that the percentage bar is a powerful model that deserves a central place in the teaching of percentages.Keywords: percentage, model, design research DOI: http://dx.doi.org/10.22342/jme.4.1.558.1-8

  6. The Disability Dilemma: A Skeptical Bench & Bar

    Directory of Open Access Journals (Sweden)

    Wendy F. Hensel

    2008-04-01

    Full Text Available The legal profession is no stranger to the bias and prejudice present in American society. Members of the bar have been shown to engage in both conscious and subconscious sexism and racism, posing challenges to the profession as the profile of those practicing law has changed over the last several decades to admit increasing numbers of women and minorities.1 Nevertheless, it is notable that few, if any, members of the bar today would question openly whether women or people of color have the ability to be successful, productive members of the profession. Instead, the conventional wisdom is that the greatest obstacles to their success will come in the form of external barriers and institutional policies based on preconceived norms that do not acknowledge the divergent challenges faced by these group members.

  7. Riverbank erosion induced by gravel bar accretion

    Science.gov (United States)

    Klösch, Mario; Habersack, Helmut

    2010-05-01

    Riverbank erosion is known to be strongly fluvially controlled and determination of shear stresses at the bank surface and at the bank toe is a crucial point in bank erosion modeling. In many modeling attempts hydraulics are simulated separately in a hydrodynamic-numerical model and the simulated shear stresses are further applied onto the bank surface in a bank erosion model. Hydrodynamics are usually simulated at a constant geometry. However, in some cases bed geometry may vary strongly during the event, changing the conditions for hydrodynamics along the bank. This research seeks to investigate the effect of gravel bar accretion during high discharges on final bank retreat. At a restored section of the Drava River bed widenings have been implemented to counter bed degradation. There, in an initiated side-arm, self-dynamic widening strongly affects bed development and long-term connectivity to the main channel. Understanding the riverbank erosion processes there would help to improve planning of future restoration measures. At one riverbank section in the side-arm large bank retreat was measured repeatedly after several flow events. This section is situated between two groins with a distance of 60 m, which act as lateral boundaries to the self-widening channel. In front of this bank section a gravel bar developed. During low flow condition most discharge of the side-arm flows beside the gravel bar along the bank, but shear stresses are too low for triggering bank erosion. For higher discharges results from a two-dimensional hydrodynamic-numerical model suggested shear stresses there to be generally low during the entire events. At some discharges the modeled flow velocities even showed to be recirculating along the bank. These results didn't explain the observed bank retreat. Based on the modeled shear stresses, bank erosion models would have greatly underestimated the bank retreat induced by the investigated events. Repeated surveys after events applying

  8. Arbejdsulykker inden for BAR-SOSU

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    Denne rapport er udarbejdet til BAR SOSU, som har formuleret følgende opgave: 1. At få udarbejdet et overblik over den viden om ulykker indenfor SOSU´s område, som foreligger i eksisterende statistikker, med henblik på udviklingen over de seneste 5-10 år, ulykkernes konsekvenser i form af skadens...... art og i det omfang det er muligt også ulykkernes art. 2. At få gennemgået BAR SOSU´s nuværende materiale målrettet ulykkesforebyggelse og vurdere, hvad der kan udvikles yderligere til brug for at styrke det ulykkesforebyggende arbejde. 3. Med udgangspunkt i nyere forskning om ulykkesforebyggelse og...

  9. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington

    2002-09-29

    developed a method involving cross-correlation of seismic waveforms to provide a reliable map of the various facies present in the area. The Wamsutter data set led to the use of unconventional attributes including lateral incoherence and horizon-dependent impedance variations to indicate regions of former sand bars and current high pressure, respectively, and to evaluation of various upscaling routines. The Teal South data set has provided a surprising set of results, leading us to develop a pressure-dependent velocity relationship and to conclude that nearby reservoirs are undergoing a pressure drop in response to the production of the main reservoir, implying that oil is being lost through their spill points, never to be produced. Additional results were found using the public-domain Waha and Woresham-Bayer data set, and some tests of technologies were made using 2D seismic lines from Michigan and the western Pacific ocean.

  10. CALIBRATION OF SEISMIC ATTRIBUTES FOR RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington; Horacio Acevedo; Aaron Green; Joshua Haataja; Shawn Len; Anastasia Minaeva; Deyi Xie

    2002-10-01

    productive and non-productive subfacies, and we developed a method involving cross-correlation of seismic waveforms to provide a reliable map of the various facies present in the area. The Wamsutter data set led to the use of unconventional attributes including lateral incoherence and horizon-dependent impedance variations to indicate regions of former sand bars and current high pressure, respectively, and to evaluation of various upscaling routines. The Teal South data set has provided a surprising set of results, leading us to develop a pressure-dependent velocity relationship and to conclude that nearby reservoirs are undergoing a pressure drop in response to the production of the main reservoir, implying that oil is being lost through their spill points, never to be produced. Additional results were found using the public-domain Waha and Woresham-Bayer data set, and some tests of technologies were made using 2D seismic lines from Michigan and the western Pacific ocean.

  11. Hadron Physics in BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Lafferty, G.D.; /Manchester U.

    2005-08-29

    Some recent results in hadron physics from the BaBar experiment are discussed. In particular, the observation of two new charmed states, the D*{sub sJ}{sup +}(2317) and the D*{sub sJ}{sup +}(2457), is described, and results are presented on the first measurement of the rare decay mode of the B meson, B{sup 0} {pi}{sup 0}{pi}{sup 0}.

  12. Diffusion in barred-spiral galaxies

    CERN Document Server

    Brunetti, Maura; Pfenniger, Daniel

    2010-01-01

    We characterize the radial migration of stars in the disk plane by calculating the diffusion coefficient and the diffusion time-scale for a bulge-disk N-body self-consistent system with a marginally-stable Toomre-Q parameter. We find that diffusion is not constant in time, but follows the evolution of the bar, and becomes maximum near the corotation region and in the external disk region, where asymmetric patterns develop.

  13. Measurement of $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ ratio at 13 TeV with the CMS Detector

    CERN Document Server

    Jo, Young-kwon

    2016-01-01

    The measurement of the cross section ratio $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ is presented using a data sample corresponding to an integrated luminosity of 2.3~$\\rm{fb}^{-1}$ collected in pp collisions at \\\\ $\\sqrt{s}$ = 13TeV with the CMS detector at the LHC. Events with two leptons and at least four reconstructed jets, including at least two identified as b quark jets, in the final state are selected. The measured ratio is $0.022 \\pm 0.003$(stat.)$\\pm0.006$(syst.) in the full phase space. The measured cross section $\\sigma_{t\\bar{t}b\\bar{b}}$ is $3.9 \\pm 0.6$(stat.)$\\pm1.3$(syst.) pb and $\\sigma_{t\\bar{t}jj}$ is $176 \\pm 5$(stat.)$ \\pm 33 $(syst.) pb.

  14. Study of the decay $\\bar{B}^{0}\\rightarrow\\Lambda_{c}^{+}\\bar{p}\\pi^{+}\\pi^{-}$ and its intermediate states

    CERN Document Server

    Lees, J P; Tisserand, V; Grauges, E; Palano, A; Eigen, G; Stugu, B; Brown, D N; Kerth, L T; Kolomensky, Yu G; Lynch, G; Koch, H; Schroeder, T; Asgeirsson, D J; Hearty, C; Mattison, T S; McKenna, J A; So, R Y; Khan, A; Blinov, V E; Buzykaev, A R; Druzhinin, V P; Golubev, V B; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, K Yu; Yushkov, A N; Kirkby, D; Lankford, A J; Mandelkern, M; Atmacan, H; Gary, J W; Long, O; Vitug, G M; Campagnari, C; Hong, T M; Kovalskyi, D; Richman, J D; West, C A; Eisner, A M; Kroseberg, J; Lockman, W S; Martinez, A J; Schumm, B A; Seiden, A; Chao, D S; Cheng, C H; Echenard, B; Flood, K T; Hitlin, D G; Ongmongkolkul, P; Porter, F C; Rakitin, A Y; Andreassen, R; Huard, Z; Meadows, B T; Sokoloff, M D; Sun, L; Bloom, P C; Ford, W T; Gaz, A; Nauenberg, U; Smith, J G; Wagner, S R; Ayad, R; Toki, W H; Spaan, B; Schubert, K R; Schwierz, R; Bernard, D; Verderi, M; Clark, P J; Playfer, S; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Fioravanti, E; Garzia, I; Luppi, E; Piemontese, L; Santoro, V; Baldini-Ferroli, R; Calcaterra, A; de Sangro, R; Finocchiaro, G; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Contri, R; Guido, E; Vetere, M Lo; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Bhuyan, B; Prasad, V; Morii, M; Adametz, A; Uwer, U; Lacker, H M; Lueck, T; Dauncey, P D; Mallik, U; Chen, C; Cochran, J; Meyer, W T; Prell, S; Rubin, A E; Gritsan, A V; Arnaud, N; Davier, M; Derkach, D; Grosdidier, G; Diberder, F Le; Lutz, A M; Malaescu, B; Roudeau, P; Schune, M H; Stocchi, A; Wormser, G; Lange, D J; Wright, D M; Chavez, C A; Coleman, J P; Fry, J R; Gabathuler, E; Hutchcroft, D E; Payne, D J; Touramanis, C; Bevan, A J; Di Lodovico, F; Sacco, R; Sigamani, M; Cowan, G; Davis, C L; Denig, A G; Fritsch, M; Gradl, W; Griessinger, K; Hafner, A; Prencipe, E; Barlow, R J; Jackson, G; Lafferty, G D; Behn, E; Cenci, R; Hamilton, B; Jawahery, A; Roberts, D A; Dallapiccola, C; Cowan, R; Dujmic, D; Sciolla, G; Cheaib, R; Lindemann, D; Patel, P M; Robertson, S H; Biassoni, P; Neri, N; Palombo, F; Stracka, S; Cremaldi, L; Godang, R; Kroeger, R; Sonnek, P; Summers, D J; Nguyen, X; Simard, M; Taras, P; De Nardo, G; Monorchio, D; Onorato, G; Sciacca, C; Martinelli, M; Raven, G; Jessop, C P; LoSecco, J M; Wang, W F; Honscheid, K; Kass, R; Brau, J; Frey, R; Sinev, N B; Strom, D; Torrence, E; Feltresi, E; Gagliardi, N; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simi, G; Simonetto, F; Stroili, R; Akar, S; Ben-Haim, E; Bomben, M; Bonneaud, G R; Briand, H; Calderini, G; Chauveau, J; Hamon, O; Leruste, Ph; Marchiori, G; Ocariz, J; Sitt, S; Biasini, M; Manoni, E; Pacetti, S; Rossi, A; Angelini, C; Batignani, G; Bettarini, S; Carpinelli, M; Casarosa, G; Cervelli, A; Forti, F; Giorgi, M A; Lusiani, A; Oberhof, B; Perez, A; Rizzo, G; Walsh, J J; Pegna, D Lopes; Olsen, J; Smith, A J S; Anulli, F; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Gioi, L Li; Mazzoni, M A; Piredda, G; Bünger, C; Grünberg, O; Hartmann, T; Leddig, T; Schröder, H; Voß, C; Waldi, R; Adye, T; Olaiya, E O; Wilson, F F; Emery, S; de Monchenault, G Hamel; Vasseur, G; Y\\`, Ch; Aston, D; Bartoldus, R; Benitez, J F; Cartaro, C; Convery, M R; Dorfan, J; Dubois-Felsmann, G P; Dunwoodie, W; Ebert, M; Field, R C; Sevilla, M Franco; Fulsom, B G; Gabareen, A M; Graham, M T; Grenier, P; Hast, C; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Lewis, P; Lindquist, B; Luitz, S; Luth, V; Lynch, H L; MacFarlane, D B; Muller, D R; Neal, H; Nelson, S; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Snyder, A; Su, D; Sullivan, M K; Va'vra, J; Wagner, A P; Wisniewski, W J; Wittgen, M; Wright, D H; Wulsin, H W; Young, C C; Ziegler, V; Park, W; Purohit, M V; White, R M; Wilson, J R; Randle-Conde, A; Sekula, S J; Bellis, M; Burchat, P R; Miyashita, T S; Puccio, E M T; Alam, M S; Ernst, J A; Gorodeisky, R; Guttman, N; Peimer, D R; Soffer, A; Spanier, S M; Ritchie, J L; Ruland, A M; Schwitters, R F; Wray, B C; Izen, J M; Lou, X C; Bianchi, F; Gamba, D; Zambito, S; Lanceri, L; Vitale, L; Martinez-Vidal, F; Oyanguren, A; Villanueva-Perez, P; Ahmed, H; Albert, J; Banerjee, Sw; Bernlochner, F U; Choi, H H F; King, G J; Kowalewski, R; Lewczuk, M J; Nugent, I M; Roney, J M; Sobie, R J; Tasneem, N; Gershon, T J; Harrison, P F; Latham, T E; Band, H R; Dasu, S; Pan, Y; Prepost, R; Wu, S L

    2013-01-01

    We study the decay $\\bar{B}^{0}\\rightarrow\\Lambda_{c}^{+}\\bar{p}\\pi^{+}\\pi^{-}$, reconstructing the \\Lambda_{c}^{+} baryon in the $p K^{-}\\pi^{+}$ mode, using a data sample of $467\\times 10^{6}$ $B\\bar{B}$ pairs collected with the BaBar detector at the PEP-2 storage rings at SLAC. We measure branching fractions for decays with intermediate $\\Sigma_{c}$ baryons to be ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2455)^{++}\\bar{p}\\pi^{-}]=(21.3 \\pm 1.0 \\pm 1.0 \\pm 5.5) \\times 10^{-5}$, ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2520)^{++}\\bar{p}\\pi^{-}]=(11.5\\pm 1.0 \\pm 0.5 \\pm 3.0)\\times 10^{-5}$, ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2455)^{0}\\bar{p}\\pi^{+}]=(9.1 \\pm 0.7 \\pm 0.4 \\pm 2.4)\\times10^{-5}$, and ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2520)^{0}\\bar{p}\\pi^{+}]= (2.2 \\pm 0.7 \\pm 0.1\\pm 0.6) \\times 10^{-5}$, where the uncertainties are statistical, systematic, and due to the uncertainty on the $\\Lambda_{c}^{+}\\rightarrow\\proton\\Km\\pi^{+}$ branching fraction, respectively. For decays without $\\Sig...

  15. New Spectroscopy at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Mazzoni, M.A.; /INFN, Rome

    2007-04-18

    The Babar experiment at the SLAC B factory has accumulated a high luminosity that offers the possibility of systematic studies of quarkonium spectroscopy and of investigating rare new phenomena. Recent results in this field are presented. In recent times spectroscopy has become exciting again, after the discovery of new states that are not easily explained by conventional models. States such as the X(3872) and the Y(4260) could be new excited charmonium states, but require precise measurements for positive identification. The BaBar experiment [1] is installed at the asymmetric storage ring PEP-II. 90% of the data accumulated by BaBar are taken at the Y(4S) (10.58 GeV) and 10% just below (10.54 GeV). The BaBar detector includes a 5-layer, double-sided silicon vertex tracker and a 40-layer drift chamber in a 1.5 T solenoidal magnetic field, which detect charged particles and measures their momenta and ionization energy losses. Photons, electrons, and neutral hadrons are detected with a CsI(Tl)-crystal electromagnetic calorimeter. An internally reflecting ring-imaging Cherenkov is also used for particle id. Penetrating muon and neutral hadrons are identified by an array of resistive-plate chambers embedded in the steel of the flux return. The detector allows good track and vertex resolution, good particle id and good photon detection so it is especially suited for spectroscopy studies.

  16. Formation of Nuclear Spirals in Barred Galaxies

    CERN Document Server

    Ann, H B; Thakur, Parijat

    2004-01-01

    We have performed smoothed particle hydrodynamics (SPH) simulations for the response of the gaseous disk to the imposed moderately strong non-axisymmetric potentials. The model galaxies are composed of the three stellar components (disk, bulge and bar) and two dark ones (supermassive black hole and halo) whose gravitational potentials are assumed to be invariant in time in the frame corotating with the bar. We found that the torques alone generated by the moderately strong bar that gives the maximum of tangential-to-radial force ratio as $(F_{Tan}/F_{Rad})_{max}= 0.3$ are not sufficient to drive the gas particles close to the center due to the barrier imposed by the inner Lindblad resonances (ILRs). In order to transport the gas particles towards the nucleus ($r<100$ pc), a central supermassive black hole (SMBH) and high sound speed of the gas are required to be present. The former is required to remove the inner inner Lindblad resonance (IILR) that prevents gas inflow close to the nucleus, while the latte...

  17. Leptonic B Decays at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Baracchini, Elisabetta; /Rome U. /INFN, Rome

    2011-11-10

    We will present the most recent results on leptonic B decays B{sup {+-}(0)} {yields} K*{sup {+-}(0)}{nu}{bar {nu}} and B{sup {+-}} {yields} {mu}{sup {+-}}{nu}, based on the data collected by the BaBar detector at PEP-II, an asymmetric e{sup +}e{sup -} collider at the center of mass energy of the {Upsilon}(4S) resonance. Rare B decays have always been a standard probe for New Physics (NP) searches. The very low Standard Model (SM) rate of these decays often make them unaccessible with the present experimental datasets, unless NP effects enhance the rate up to the current experimental sensitivity. Moreover, as NP effects can modify the decay kinematic, particular attention must be paid in order to perform a model independent analysis. A B-Factory provides an unique environment to investigate these processes. The high number of B{bar B} pairs produced by a B-Factory often allows to approach the needed experimental sensitivity. Moreover, the clean environment and the closed kinematic of the initial state enable to obtaining a very pure sample where to look for these decays.

  18. Leptonic B Decays at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Monorchio, Diego; /INFN, Naples /Naples U.

    2011-09-13

    The authors will present the most recent results on leptonic B decays B{sup {+-}(0)} {yields} K*{sup {+-}(0)} {nu}{bar {nu}} and B{sup {+-}} {yields} {mu}{sup {+-}}{nu}, based on the data collected by the BaBar detector at PEP-II, an asymmetric e{sup +}e{sup -} collider at the center of mass energy of the {Upsilon}(4S) resonance. Rare B decays have always been a standard probe for New Physics (NP) searches. The very low Standard Model (SM) rate of these decays often make them unaccessible with the present experimental datasets, unless NP effects enhance the rate up to the current experimental sensitivity. Moreover, as NP effects can modify the decay kinematic, particular attention must be payed in order to perform a model independent analysis. A B-Factory provides an unique environment where to investigate these processes. The high number of B{bar B} pairs produced by a B-Factory often allows to approach the needed experimental sensitivity. Moreover, the clean environment and the closed kinematic of the initial state enable to obtaining a very pure sample where to look for these decays.

  19. Near Infrared Spectra of the Orion Bar

    CERN Document Server

    Marconi, A; Natta, A; Walmsley, C M; Spazio, D A S; Firenze, U; Arcetri, O A

    1997-01-01

    We have used the LONGSP spectrometer on the 1.5-m TIRGO telescope to obtain long slit spectra in the J, H, and K wavelength bands towards two positions along the Orion bar. These data have been supplemented with images made using the ARNICA camera mounted on TIRGO as well as with an ESO NTT observation carried out by Dr A. Moorwood. We detect a variety of transitions of hydrogen, helium, OI, FeII, FeIII, and H_2 . From our molecular hydrogen data, we conclude that densities are moderate (3-6 10^4 cm^-3) in the layer responsible for the molecular hydrogen emission and give no evidence for the presence of dense neutral clumps. We also find that the molecular hydrogen bar is likely to be tilted by ~10 degrees relative to the line of sight. We discuss the relative merits of several models of the structure of the bar and conclude that it may be split into two structures separated by 0.2-0.3 parsec along the line of sight. It also seems likely to us that in both structures, density increases along a line perpendicu...

  20. Antihydrogen Production in $ \\bar{p} $ Z - interaction

    CERN Multimedia

    2002-01-01

    % PS210 \\\\ \\\\ The production of the antihydrogen atom $ \\bar {H}^0 \\equiv \\bar{p}e $ as the simplest atomic bound state of antimatter has been studied. Nine $ \\bar {H}^0 $ have been observed.\\\\ \\\\ The production of $ \\bar {H}^0 $ is predominantly mediated by the two-photon mechanism in the antiproton-nucleus interaction. In principle $ \\bar {H}^0 $ is well suited for investigations of fundamental CPT violation studies under different forces, however, in the present experiment we concentrated on the production of this antimatter object, since so far it never had been observed.

  1. The influence of the environment on bar formation

    CERN Document Server

    Mendez-Abreu, J; Zarattini, S; Sanchez-Janssen, R; Corsini, E M

    2009-01-01

    Galaxy mergers and interactions are mechanisms which could drive the formation of bars. Therefore, we could expect that the fraction of barred galaxies increases with the local density. Here we show the first results of an extensive search for barred galaxies in different environments. We conclude that the bar fraction on bright (L>L*) field, Virgo, and Coma cluster galaxies is compatible. These results point towards an scenario where the formation and/or evolution of bars depend mostly on internal galaxy processes rather than external ones.

  2. How can double-barred galaxies be long-lived?

    Science.gov (United States)

    Wozniak, Hervé

    2015-03-01

    Context. Double-barred galaxies account for almost one third of all barred galaxies, suggesting that secondary stellar bars, which are embedded in large-scale primary bars, are long-lived structures. However, up to now it has been hard to self-consistently simulate a disc galaxy that sustains two nested stellar bars for longer than a few rotation periods. Aims: The dynamical and physical requirements for long-lived triaxiality in the central region of galaxies still need to be clarified. Methods: N-body/hydrodynamical simulations including star formation recipes have been performed. Their properties (bar lengths, pattern speeds, age of stellar population, and gas content) have been compared with the most recent observational data in order to prove that they are representative of double-barred galaxies, even SB0. Overlaps in dynamical resonances and bar modes have been looked for using Fourier spectrograms. Results: Double-barred galaxies have been successfully simulated with lifetimes as long as 7 Gyr. The stellar and gaseous distributions in the central regions are time dependent and display many observed morphological features (circumnuclear rings, pseudo-bulges, triaxial bulges, ovals, etc.) typical of barred galaxies, even early-type. The stellar population of the secondary bar is younger on average than for the primary large-scale bar. An important feature of these simulations is the absence of any resonance overlap for several Gyr. In particular, there is no overlap between the primary bar inner Lindblad resonance and the secondary bar corotation. Therefore, mode coupling cannot sustain the secondary bar mode. Star formation is identified here as possibly being responsible for bringing energy to the nuclear mode. Star formation is also responsible for limiting the amount of gas in the central region which prevents the orbits sustaining the secondary bar from being destroyed. Therefore, the secondary bar can dissolve but reappear after ≈1 Gyr as the

  3. Heat Transfer in the LHC Main Superconducting Bus Bars

    CERN Document Server

    Granieri, P P; Richter, D

    2011-01-01

    CERN is performing a systematic analysis of the interconnecting bus bars of the Large Hadron Collider (LHC) main magnets. Their thermal, electrical, mechanical and hydraulic performances are addressed. In the frame of these studies, the heat transfer between the main superconducting (SC) bus bars and the surrounding He bath is investigated. It represents a key parameter in the comprehension of the bus bars stability and quench propagation mechanisms, thus crucial for the analysis of the 2008 incident which was triggered by a defective bus bars joint. This paper reports on the experimental tests and relative analysis aiming at describing the thermal behavior of the LHC main bus bars.

  4. Slowly rotating bars-Morphologies introduced by bistability in barred-spiral galactic potentials

    CERN Document Server

    Tsigaridi, L

    2015-01-01

    We investigate the orbital dynamics of a \\textit{barred-spiral} model when the system is rotating slowly and corotation is located beyond the end of the spiral arms. In the characteristic of the central family of periodic orbits we find a "bistable region". In the response model we observe a ring surrounding the bar and spiral arms starting tangential to the ring. This is a morphology resembling barred-spiral systems with inner rings. However, the dynamics associated with this structure in the case we study is different from that of a typical bar ending close to corotation. The ring of our model is round, or rather elongated perpendicular to the bar. It is associated with a folding (an "S" shaped feature) of the characteristic of the central family, which is typical in bistable bifurcations. Along the "S" part of the characteristic we have a change in the orientation of the periodic orbits from a x1-type to a x2-type morphology. The orbits populated in the response model change rather abruptly their orientati...

  5. Automated bar detection in local disc galaxies from the SDSS - The colors of bars

    CERN Document Server

    Consolandi, Guido

    2016-01-01

    This paper describes an automatic isophotal fitting procedure that succeeds, without the support of any visual inspection of neither the images nor the ellipticity/P.A. radial profiles, at extracting a fairly pure sample of barred LTGs among thousands of optical images from the SDSS. The procedure relies on the methods described in Consolandi et al. (2016) to robustly extract the photometrical properties of a large sample of local SDSS galaxies and is tailored to extract bars on the basis of their well-known peculiarities in their P.A. and ellipticity profiles. It has been run on a sample of 5853 galaxies in the Coma and Local supercluster. The procedure extracted for each galaxy a color, an ellipticity and a position angle radial profile of the ellipses fitted to the isophotes. Examining automatically the profiles of 922 face-on late-type galaxies (B/A >0.7) the procedure found that ~ 36 % are barred. The local bar fraction strongly increases with stellar mass. The sample of barred galaxies is used to constr...

  6. On the galactic spin of barred disk galaxies

    CERN Document Server

    Cervantes-Sodi, Bernardo; Park, Changbom; Wang, Lixin

    2013-01-01

    We present a study of the connection between the galactic spin parameter $\\lambda_{d}$ and the bar fraction in a volume-limited sample of 10,674 disk galaxies drawn from the Sloan Digital Sky Survey Data Release 7. The galaxies in our sample are visually classified into galaxies hosting strong or weak bars, and non-barred galaxies. We find that the spin distributions of these three classes are statistically different, with galaxies hosting strong bars with the lowest $\\lambda_{d}$ values, followed by non-barred galaxies, while galaxies with weak bars present typically high spin parameters. The bar fraction presents its maximum at low to intermediate $\\lambda_{d}$ values for the case of strong bars, while the maximum for weak bars is at high $\\lambda_{d}$. This bi-modality is in good agreement with previous studies finding stronger bars hosted by luminous, massive, red galaxies with low content of cold gas, while weak bars are found in low luminosity, low mass, blue galaxies, usually gas rich. In addition, the...

  7. Which bulges are favoured by barred S0 galaxies?

    CERN Document Server

    Barway, Sudhanshu; Vaghmare, Kaustubh; Kembhavi, Ajit K

    2016-01-01

    S0 galaxies are known to host classical bulges with a broad range of size and mass, while some such S0s are barred and some not. The origin of the bars has remained as a long-standing problem -- what made bar formation possible in certain S0s? By analysing a large sample of S0s with classical bulges observed by the Spitzer space telescope, we find that most of our barred S0s host comparatively low-mass classical bulges, typically with bulge-to-total ratio ($B/T$) less than $0.5$; whereas S0s with more massive classical bulges than these do not host any bar. Furthermore, we find that amongst the barred S0s, there is a trend for the longer and massive bars to be associated with comparatively bigger and massive classical bulges -- possibly suggesting bar growth being facilitated by these classical bulges. In addition, we find that the bulge effective radius is always less than the bar effective radius --indicating an interesting synergy between the host classical bulge and bars being maintained while bar growth ...

  8. The relation between bar formation, galaxy luminosity, and environment

    CERN Document Server

    Corsini, E M; Sanchez-Janssen, R; Aguerri, J A L; Zarattini, S

    2013-01-01

    We derive the bar fraction in three different environments ranging from the field to Virgo and Coma clusters, covering an unprecedentedly large range of galaxy luminosities (or, equivalently, stellar masses). We confirm that the fraction of barred galaxies strongly depends on galaxy luminosity. We also show that the difference between the bar fraction distributions as a function of galaxy luminosity (and mass) in the field and Coma cluster are statistically significant, with Virgo being an intermediate case. We interpret this result as a variation of the effect of environment on bar formation depending on galaxy luminosity. We speculate that brighter disk galaxies are stable enough against interactions to keep their cold structure, thus, the interactions are able to trigger bar formation. For fainter galaxies the interactions become strong enough to heat up the disks inhibiting bar formation and even destroying the disks. Finally, we point out that the controversy regarding whether the bar fraction depends on...

  9. MULTI-bar K (hyper)nuclei and Kaon Condensation

    Science.gov (United States)

    Gazda, D.; Mareš, J.; Friedman, E.; Gal, A.

    2010-10-01

    We report on recent relativistic mean-field calculations of multi-bar K nuclei1,2 which were performed fully and self-consistently across the periodic table. The bar K separation energy B{bar K} as well as the nuclear and bar K-meson densities were found to saturate with the number of antikaons in the nuclear medium. Saturation appears robust against a wide range of variations, including the nuclear model used and the type of boson fields mediating the strong interactions. In addition, we have explored properties of kaonic hypernuclei - strange systems made of nucleons, hyperons and K- mesons. We observed saturation also in these objects. Since the bar K separation energy B{bar K} does not exceed 200 MeV, multi-bar K nuclei lie energetically well above multi-hyperonic nuclei and it is unlikely that kaon condensation could occur in strong-interaction self-bound hadronic matter.

  10. basement reservoir geometry and properties

    Science.gov (United States)

    Walter, bastien; Geraud, yves; Diraison, marc

    2017-04-01

    Basement reservoirs are nowadays frequently investigated for deep-seated fluid resources (e.g. geothermal energy, groundwater, hydrocarbons). The term 'basement' generally refers to crystalline and metamorphic formations, where matrix porosity is negligible in fresh basement rocks. Geothermal production of such unconventional reservoirs is controlled by brittle structures and altered rock matrix, resulting of a combination of different tectonic, hydrothermal or weathering phenomena. This work aims to characterize the petro-structural and petrophysical properties of two basement surface analogue case studies in geological extensive setting (the Albert Lake rift in Uganda; the Ifni proximal margin of the South West Morocco Atlantic coast). Different datasets, using field structural study, geophysical acquisition and laboratory petrophysical measurements, were integrated to describe the multi-scale geometry of the porous network of such fractured and weathered basement formations. This study points out the multi-scale distribution of all the features constituting the reservoir, over ten orders of magnitude from the pluri-kilometric scale of the major tectonics structures to the infra-millimetric scale of the secondary micro-porosity of fractured and weathered basements units. Major fault zones, with relatively thick and impermeable fault core structures, control the 'compartmentalization' of the reservoir by dividing it into several structural blocks. The analysis of these fault zones highlights the necessity for the basement reservoirs to be characterized by a highly connected fault and fracture system, where structure intersections represent the main fluid drainage areas between and within the reservoir's structural blocks. The suitable fluid storage areas in these reservoirs correspond to the damage zone of all the fault structures developed during the tectonic evolution of the basement and the weathered units of the basement roof developed during pre

  11. Application of Integrated Reservoir management and Reservoir Characterization to Optimize Infill Drilling

    Energy Technology Data Exchange (ETDEWEB)

    B. Pregger; D. Davies; D. Moore; G. Freeman; J. Callard; J.W. Nevans; L. Doublet; R. Vessell; T. Blasingame

    1997-08-31

    Infill drilling if wells on a uniform spacing without regard to reservoir performance and characterization foes not optimize reservoir development because it fails to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, and carbonate reservoirs in particular. New and emerging technologies, such as geostatistical modeling, rigorous decline curve analysis, reservoir rock typing, and special core analysis can be used to develop a 3-D simulation model for prediction of infill locations.

  12. Reservoir Protection Technology in China: Research & Application

    Institute of Scientific and Technical Information of China (English)

    Li Qiangui; Wu Juan; Kang Yili

    2006-01-01

    @@ Great development of reservoir protection technology (RPT) has been achieved since 1996, including oil and gas reservoir protection for exploration wells, reservoir protection during underbalanced drilling, protection of fractured tight sandstone gas reservoir, and reservoir protection while increase production and reconstructing, development and enhanced oil recovery (EOR) etc. It has stepped into a new situation with special features and advantage. These technical advancements marked that China's RTP have realized leaps from porous reservoirs to fractured reservoirs,from conventional medium-to-low permeability reservoirs to unconventional reservoirs, from oil and gas producers to exploration wells, and from application mainly in drilling and completion processes to application in stimulation,development, production and EOR processes.

  13. Exact calculations of a quasi-bound state in the $\\bar{K} \\bar{K} N$ system

    CERN Document Server

    Shevchenko, N V

    2015-01-01

    Dynamically exact calculations of a quasi-bound state in the $\\bar{K}\\bar{K}N$ three-body system are performed using Faddeev-type AGS equations. As input two phenomenological and one chirally motivated $\\bar{K}N$ potentials are used, which describe the experimental information on the $\\bar{K}N$ system equally well and produce either a one- or two-pole structure of the $\\Lambda(1405)$ resonance. For the $\\bar{K}\\bar{K}$ interaction separable potentials are employed that are fitted to phase shifts obtained from two theoretical models. The first one is a phenomenological $\\bar{K}\\bar{K}$ potential based on meson exchange, which is derived by SU(3) symmetry arguments from the J\\"ulich $\\pi \\pi - \\bar{K} K$ coupled-channels model. The other interaction is a variant of the first one, which is adjusted to the $KK$ s-wave scattering length recently determined in lattice QCD simulations. The position and width of the $\\bar{K}\\bar{K}N$ quasi-bound state is evaluated in two ways: (i) by a direct pole search in the compl...

  14. Multilevel techniques for Reservoir Simulation

    DEFF Research Database (Denmark)

    Christensen, Max la Cour

    The subject of this thesis is the development, application and study of novel multilevel methods for the acceleration and improvement of reservoir simulation techniques. The motivation for addressing this topic is a need for more accurate predictions of porous media flow and the ability to carry...... Full Approximation Scheme) • Variational (Galerkin) upscaling • Linear solvers and preconditioners First, a nonlinear multigrid scheme in the form of the Full Approximation Scheme (FAS) is implemented and studied for a 3D three-phase compressible rock/fluids immiscible reservoir simulator...... based on element-based Algebraic Multigrid (AMGe). In particular, an advanced AMGe technique with guaranteed approximation properties is used to construct a coarse multilevel hierarchy of Raviart-Thomas and L2 spaces for the Galerkin coarsening of a mixed formulation of the reservoir simulation...

  15. Amplitude various angles (AVA) phenomena in thin layer reservoir: Case study of various reservoirs

    Science.gov (United States)

    Nurhandoko, Bagus Endar B.; Susilowati

    2015-04-01

    Amplitude various offset is widely used in petroleum exploration as well as in petroleum development field. Generally, phenomenon of amplitude in various angles assumes reservoir's layer is quite thick. It also means that the wave is assumed as a very high frequency. But, in natural condition, the seismic wave is band limited and has quite low frequency. Therefore, topic about amplitude various angles in thin layer reservoir as well as low frequency assumption is important to be considered. Thin layer reservoir means the thickness of reservoir is about or less than quarter of wavelength. In this paper, I studied about the reflection phenomena in elastic wave which considering interference from thin layer reservoir and transmission wave. I applied Zoeppritz equation for modeling reflected wave of top reservoir, reflected wave of bottom reservoir, and also transmission elastic wave of reservoir. Results show that the phenomena of AVA in thin layer reservoir are frequency dependent. Thin layer reservoir causes interference between reflected wave of top reservoir and reflected wave of bottom reservoir. These phenomena are frequently neglected, however, in real practices. Even though, the impact of inattention in interference phenomena caused by thin layer in AVA may cause inaccurate reservoir characterization. The relation between classes of AVA reservoir and reservoir's character are different when effect of ones in thin reservoir and ones in thick reservoir are compared. In this paper, I present some AVA phenomena including its cross plot in various thin reservoir types based on some rock physics data of Indonesia.

  16. Impact of Partial Time Delay on Temporal Dynamics of Watts-Strogatz Small-World Neuronal Networks

    Science.gov (United States)

    Yan, Hao; Sun, Xiaojuan

    2017-06-01

    In this paper, we mainly discuss effects of partial time delay on temporal dynamics of Watts-Strogatz (WS) small-world neuronal networks by controlling two parameters. One is the time delay τ and the other is the probability of partial time delay pdelay. Temporal dynamics of WS small-world neuronal networks are discussed with the aid of temporal coherence and mean firing rate. With the obtained simulation results, it is revealed that for small time delay τ, the probability pdelay could weaken temporal coherence and increase mean firing rate of neuronal networks, which indicates that it could improve neuronal firings of the neuronal networks while destroying firing regularity. For large time delay τ, temporal coherence and mean firing rate do not have great changes with respect to pdelay. Time delay τ always has great influence on both temporal coherence and mean firing rate no matter what is the value of pdelay. Moreover, with the analysis of spike trains and histograms of interspike intervals of neurons inside neuronal networks, it is found that the effects of partial time delays on temporal coherence and mean firing rate could be the result of locking between the period of neuronal firing activities and the value of time delay τ. In brief, partial time delay could have great influence on temporal dynamics of the neuronal networks.

  17. Watt-level passively Q-switched double-cladding fiber laser based on graphene oxide saturable absorber.

    Science.gov (United States)

    Yu, Zhenhua; Song, Yanrong; Dong, Xinzheng; Li, Yanlin; Tian, Jinrong; Wang, Yonggang

    2013-10-10

    A watt-level passively Q-switched ytterbium-doped double-cladding fiber laser with a graphene oxide (GO) absorber was demonstrated. The structure of the GO saturable absorber mirror (GO-SAM) was of the sandwich type. A maximum output power of 1.8 W was obtained around a wavelength of 1044 nm. To the best of our knowledge, this is the highest output power in Q-switched fiber lasers based on a GO saturable absorber. The pure GO was protected from the oxygen in the air so that the damage threshold of the GO-SAM was effectively raised. The gain fiber was a D-shaped ytterbium-doped double-cladding fiber. The pulse repetition rates were tuned from 120 to 215 kHz with pump powers from 3.89 to 7.8 W. The maximum pulse energy was 8.37 μJ at a pulse width of 1.7 μs.

  18. Subsea thermoelectric generators. 1- 10-watt peltier effect prototypes - a step towards autonomous electrical control units at subsea wellheads

    Energy Technology Data Exchange (ETDEWEB)

    Weid, J.P. von der; Silva, J.A.P. da; Gama, A.L.; Sant' Anna, A.C.

    1994-05-01

    Offshore oil production activities require the operation of underwater hydraulic or electric equipment. The high cost of acquisition and installation of umbilical cables to supply power is leading to the development of independently powered cableless equipment, connected to the surface by the transmission and reception of control signals through the water. As a first step toward these autonomous wellhead control systems, the authors designed and successfully tested in laboratory conditions a thermoelectric generator able to supply at least 10 watts of electric power, extracting it from the temperature difference between the oil and the surrounding water. Hydraulic pumps and pressure accumulators, control electronics, and valve actuators for wellhead control units are all technically solved problems, even for seafloors as deep as 1,000 meters. However, an autonomous underwater wellhead control unit can only be conceived if an energy source is available at the seafloor. The development of a reliable and compact power source is indeed a fundamental step towards autonomous wet Christmas tree valve actuators.

  19. A summary of the Planck constant measurements using a watt balance with a superconducting solenoid at NIST

    CERN Document Server

    Schlamminger, S; Haddad, D; Newell, D B; Seifert, F; Chao, L S; Liu, R; Williams, E R; Pratt, J R

    2015-01-01

    Researchers at the National Institute of Standards and Technology have been using a watt balance, NIST-3, to measure the Planck constant $h$ for over ten years. Two recently published values disagree by more than one standard uncertainty. The motivation for the present manuscript is twofold. First, we correct the latest published number to take into account a recently discovered systematic error in mass dissemination at the Bureau International des Poids et Mesures (BIPM). Second, we provide guidance on how to combine the two numbers into one final result. In order to adequately reflect the discrepancy, we added an additional systematic uncertainty to the published uncertainty budgets. The final value of $h$ measured with NIST-3 is $h = 6.626\\,069\\,36(37)\\times 10^{-34}\\,\\mbox{J\\,s}$. This result is $77(57) \\times 10^{-9}$ fractionally higher than $h_{\\mathrm{90}}$. Each number in parentheses gives the value of the standard uncertainty in the last two digits of the respective value and $h_{\\mathrm{90}}$ is th...

  20. Periodic coupling strength-dependent multiple coherence resonance by time delay in Newman-Watts neuronal networks.

    Science.gov (United States)

    Wu, Yanan; Gong, Yubing; Xu, Bo

    2013-12-01

    Recently, multiple coherence resonance induced by time delay has been observed in neuronal networks with constant coupling strength. In this paper, by employing Newman-Watts Hodgkin-Huxley neuron networks with time-periodic coupling strength, we study how the temporal coherence of spiking behavior and coherence resonance by time delay change when the frequency of periodic coupling strength is varied. It is found that delay induced coherence resonance is dependent on periodic coupling strength and increases when the frequency of periodic coupling strength increases. Periodic coupling strength can also induce multiple coherence resonance, and the coherence resonance occurs when the frequency of periodic coupling strength is approximately multiple of the spiking frequency. These results show that for periodic coupling strength time delay can more frequently optimize the temporal coherence of spiking activity, and periodic coupling strength can repetitively optimize the temporal coherence of spiking activity as well. Frequency locking may be the mechanism for multiple coherence resonance induced by periodic coupling strength. These findings imply that periodic coupling strength is more efficient for enhancing the temporal coherence of spiking activity of neuronal networks, and thus it could play a more important role in improving the time precision of information processing and transmission in neural networks.

  1. Smart Waterflooding in Carbonate Reservoirs

    DEFF Research Database (Denmark)

    Zahid, Adeel

    During the last decade, smart waterflooding has been developed into an emerging EOR technology both for carbonate and sandstone reservoirs that does not require toxic or expensive chemicals. Although it is widely accepted that different salinity brines may increase the oil recovery for carbonate...... reservoirs, understanding of the mechanism of this increase is still developing. To understand this smart waterflooding process, an extensive research has been carried out covering a broad range of disciplines within surface chemistry, thermodynamics of crude oil and brine, as well as their behavior...

  2. SIRIU RESERVOIR, BUZAU RIVER (ROMANIA

    Directory of Open Access Journals (Sweden)

    Daniel Constantin DIACONU

    2008-06-01

    Full Text Available Siriu reservoir, owes it`s creation to the dam built on the river Buzau, in the town which bears the same name. The reservoir has a hydro energetic role, to diminish the maximum flow and to provide water to the localities below. The partial exploitation of the lake, began in 1984; Since that time, the initial bed of the river began to accumulate large quantities of alluvia, reducing the retention capacity of the lake, which had a volume of 125 million m3. The changes produced are determined by many topographic surveys at the bottom of the lake.

  3. How can double-barred galaxies be long-lived?

    CERN Document Server

    Wozniak, Herve

    2015-01-01

    Double-barred galaxies account for almost one third of all barred galaxies, suggesting that secondary stellar bars, which are embedded in large-scale primary bars, are long-lived structures. However, up to now it has been hard to self-consistently simulate a disc galaxy that sustains two nested stellar bars for longer than a few rotation periods. N-body/hydrodynamical simulations including star formation recipes have been performed. Their properties have been compared with the most recent observational data in order to prove that they are representative of double-barred galaxies, even SB0. Overlaps in dynamical resonances and bar modes have been looked for using Fourier spectrograms. Double-barred galaxies have been successfully simulated with lifetimes as long as 7 Gyr. The stellar population of the secondary bar is younger on average than for the primary large-scale bar. An important feature of these simulations is the absence of any resonance overlap for several Gyr. In particular, there is no overlap betw...

  4. Non-axisymmetric vertical velocity dispersion distributions produced by bars

    CERN Document Server

    Du, Min; Debattista, Victor P

    2016-01-01

    In barred galaxies, the contours of stellar velocity dispersions ($\\sigma$) are generally expected to be oval and aligned with the orientation of bars. However, many double-barred (S2B) galaxies exhibit distinct $\\sigma$ peaks on the minor axis of inner bar, which we termed "$\\sigma$-humps," while two local $\\sigma$ minima are present close to the ends of inner bars, i.e., "$\\sigma$-hollows." Analysis of numerical simulations shows that $\\sigma_z$-humps or hollows should play an important role in generating the observed $\\sigma$-humps+hollows in low-inclination galaxies. In order to systematically investigate the properties of $\\sigma_z$ in barred galaxies, we apply the vertical Jeans equation to a group of well-designed three-dimensional bar+disk(+bulge) models. A vertically thin bar can lower $\\sigma_z$ along the bar and enhance it perpendicular to the bar, thus generating $\\sigma_z$-humps+hollows. Such a result suggests that $\\sigma_z$-humps+hollows can be generated by the purely dynamical response of star...

  5. Finite Element Simulations to Explore Assumptions in Kolsky Bar Experiments.

    Energy Technology Data Exchange (ETDEWEB)

    Crum, Justin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-05

    The chief purpose of this project has been to develop a set of finite element models that attempt to explore some of the assumptions in the experimental set-up and data reduction of the Kolsky bar experiment. In brief, the Kolsky bar, sometimes referred to as the split Hopkinson pressure bar, is an experimental apparatus used to study the mechanical properties of materials at high strain rates. Kolsky bars can be constructed to conduct experiments in tension or compression, both of which are studied in this paper. The basic operation of the tension Kolsky bar is as follows: compressed air is inserted into the barrel that contains the striker; the striker accelerates towards the left and strikes the left end of the barrel producing a tensile stress wave that propogates first through the barrel and then down the incident bar, into the specimen, and finally the transmission bar. In the compression case, the striker instead travels to the right and impacts the incident bar directly. As the stress wave travels through an interface (e.g., the incident bar to specimen connection), a portion of the pulse is transmitted and the rest reflected. The incident pulse, as well as the transmitted and reflected pulses are picked up by two strain gauges installed on the incident and transmitted bars as shown. By interpreting the data acquired by these strain gauges, the stress/strain behavior of the specimen can be determined.

  6. Dependence of Barred Galaxy Fraction on Galaxy Properties and Environment

    CERN Document Server

    Lee, Gwang-Ho; Lee, Myung Gyoon; Choi, Yun-Young

    2011-01-01

    We investigate the dependence of occurrence of bars in galaxies on galaxy properties and environment. We use a volume-limited sample of 33,391 galaxies brighter than $M_{r}=-19.5+5$log$h$ at $0.02\\le z\\le0.05489$, drawn from the SDSS DR 7. We classify the galaxies into early and late types, and identify bars by visual inspection. Among 10,674 late-type galaxies with axis ratio $b/a>0.60$, we find 3,240 barred galaxies ($f_{bar}=30.4%$) which divide into 2,542 strong bars ($f_{SB1}=23.8%$) and 698 weak bars ($f_{SB2}=6.5%$). We find that $f_{SB1}$ increases as $u-r$ color becomes redder, and that it has a maximum value at intermediate velocity dispersion ($\\sigma\\simeq$150 km s$^{-1}$). This trend suggests that strong bars are dominantly hosted by intermediate-mass systems. Weak bars prefer bluer galaxies with lower mass and lower concentration. In the case of strong bars, their dependence on the concentration index appears only for massive galaxies with $\\sigma>150$ km s${}^{-1}$. We also find that $f_{bar}$ ...

  7. Morphodynamics of a pseudomeandering gravel bar reach

    Science.gov (United States)

    Bartholdy, J.; Billi, P.

    2002-01-01

    A large number of rivers in Tuscany have channel planforms, which are neither straight nor what is usually understood as meandering. In the typical case, they consist of an almost straight, slightly incised main channel fringed with large lateral bars and lunate-shaped embayments eroded into the former flood plain. In the past, these rivers have not been recognised as an individual category and have often been considered to be either braided or meandering. It is suggested here that this type of river planform be termed pseudomeandering. A typical pseudomeandering river (the Cecina River) is described and analysed to investigate the main factors responsible for producing this channel pattern. A study reach (100×300 m) was surveyed in detail and related to data on discharge, channel changes after floods and grain-size distribution of bed sediments. During 18 months of topographic monitoring, the inner lateral bar in the study reach expanded and migrated towards the concave outer bank which, concurrently, retreated by as much as 25 m. A sediment balance was constructed to analyse bar growth and bank retreat in relation to sediment supply and channel morphology. The conditions necessary to maintain the pseudomeandering morphology of these rivers by preventing them from developing a meandering planform, are discussed and interpreted as a combination of a few main factors such as the flashy character of floods, sediment supply (influenced by both natural processes and human impact), the morphological effects of discharges with contrasting return intervals and the short duration of flood events. Finally, the channel response to floods with variable sediment transport capacity (represented by bed shear stress) is analysed using a simple model. It is demonstrated that bend migration is associated with moderate floods while major floods are responsible for the development of chute channels, which act to suppress bend growth and maintain the low sinuosity configuration of

  8. Development of sediment slug upstream from the Czorsztyn Reservoir (southern Poland) and its interaction with river morphology

    Science.gov (United States)

    Liro, Maciej

    2016-01-01

    The effects of base-level rising upstream of dam reservoirs on in-channel sedimentation and interaction of the stored sediments with the gravel-bed channel morphology have received little attention so far. Previous studies, however, suggested that the feedback mechanism between in-channel sedimentation and bank erosion may affect channel morphology. Here, the pattern of the bar area, bank erosion, and morphology of the gravel-bed Dunajec River upstream from the Czorsztyn Reservoir (CR), constructed in 1997 in southern Poland were analyzed from aerial images (1982-2012) and LiDAR data (2013). In the part of the post-dam period with a large flood, the average bar area increased significantly in the backwater section, and at some distance upstream, and then extended in the upstream direction at an average rate of above 40 m/y, reaching 2.2 km upstream from the CR in 2012. The bar area variation was 40% and 77% explained by local bank erosion in the periods of large and low to moderate floods, respectively. The sum of bank erosion from the post-dam period explained 80% of the variation in the present width/depth ratio, significantly increased in the backwater section. The results showed that the large floods in 1997, in conjunction with backwater inundation, initiated intensive bank erosion and bar growth. Subsequently, in the period with low and moderate floods, the localized bar-bank interaction, connected with the flow divergence around the deposited bar, led to localized bank erosion and additional bar growth promoting bend development. These processes, propagating in the upstream direction, were facilitated by the existence of a large amount of easily remobilized sediment stored in the floodplain connected with the sedimentation zone from the end of the nineteenth century. Bend development was controlled by valley confinement causing downstream bend translation in the narrower valley-confined section and its extension in the wider unconfined section of past

  9. Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, B.

    2006-06-27

    The authors present a search for the decay of a B{sup 0} or {bar B}{sup 0} meson to a {bar K}*{sup 0} K{sup 0} or K*{sup 0} {bar K}{sup 0} final state, using a sample of approximately 232 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric energy e{sup +}e{sup -} collider at SLAC. The measured branching fraction is {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) = (0.2{sub -0.8, -0.3}{sup +0.9, +0.1}) x 10{sup -6}. They obtain the following upper limit for the branching fraction at 90% confidence level: {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) < 1.9 x 10{sup -6}. They use our result to constrain the Standard Model prediction for the deviation of the CP asymmetry in B{sup 0} {yields} {phi}K{sup 0} from sin 2{beta}.

  10. Strong Interactions Physics at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Pioppi, M.

    2005-03-14

    Recent results obtained by BABAR experiment and related to strong interactions physics are presented, with particular attention to the extraction of the first four hadronic-mass moments and the first three lepton-energy moments in semileptonic decays. From a simultaneous fit to the moments, the CKM element |V{sub cb}|, the inclusive B {yields} X{sub c}lv and other heavy quark parameters are derived. The second topic is the ambiguity-free measurement of cos(2{beta}) in B {yields} J/{Psi}K* decays. With approximately 88 million of B{bar B} pairs, negative solutions for cos(2{beta}) are excluded at 89%.

  11. P-bar ANDA at FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Schepers, G., E-mail: g.schepers@gsi.de [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH (Germany); Collaboration: P-bar ANDA Collaboration

    2012-12-15

    The P-bar ANDA experiment represents the central part of the hadron physics branch of the antiproton program of the new Facility for Antiproton and Ion Research (FAIR) at Darmstadt/Germany. It will investigate antiproton annihilations with an almost 4{pi} acceptance from two sequent spectrometer in the momentum range from 1.5 to 15 GeV/c. The gluon rich reaction product of antiproton-proton and antiproton-nucleus collisions on one hand and the high intensity and phase space cooled antiproton beam of the HESR on the other hand constitutes an ideal environment to study the sector of non-conventional hadronic states.

  12. CP Violation at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Yeche, Christophe; /DSM, DAPNIA, Saclay

    2011-11-15

    We report recent measurements of the three CKM angles of the Unitarity Triangle using about 383 millions b{bar b} pairs collected with the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC. The results of the angles ({beta}, {alpha}, {gamma}) of the unitarity triangle are consistent with Belle results, and with other CKM constraints such as the measurement of {epsilon}{sub K}, the length of the sides of the unitarity triangle determined from the measurements of {Delta}m{sub d}, {Delta}m{sub s}, |V{sub ub}|. This is an impressive confirmation of Standard Model in quark-flavor sector.

  13. The LHCb pentaquark as a $\\bar{D}^*\\Sigma_c-\\bar{D}^*\\Sigma_c^*$ molecular state

    CERN Document Server

    Roca, L.; Oset, E.

    2015-01-01

    We perform a theoretical analysis of the $\\Lambda_b \\to J/\\psi K^- p$ reaction from where a recent LHCb experiment extracts a $\\Lambda(1405)$ contribution in the $K^- p$ spectrum close to threshold and two baryon states of hidden charm in the $J/\\psi\\,p$ spectrum. We recall that baryon states of this type have been theoretically predicted matching the mass, width and $J^P$ of the experiment, concretely some states built up from the $J/\\psi\\, N$, $\\bar D^* \\Lambda_c$, $\\bar D^* \\Sigma_c$, $\\bar D \\Sigma^*_c$ and $\\bar D^* \\Sigma^*_c$ coupled channels. We assume that the observed narrow state around 4450 MeV has this nature and we are able to describe simultaneously the shapes and relative strength of the the $K^- p$ mass distribution close to threshold and the peak of the $J/\\psi\\,p$ distribution, with values of the $J/\\psi\\, p$ coupling to the resonance in line with the theoretical ones. The non trivial matching of many properties gives support to a $J^P=3/2^-$ assignment to this state and to its nature as a ...

  14. Automated multisyringe stir bar sorptive extraction using robust montmorillonite/epoxy-coated stir bars.

    Science.gov (United States)

    Ghani, Milad; Saraji, Mohammad; Maya, Fernando; Cerdà, Víctor

    2016-05-01

    Herein we present a simple, rapid and low cost strategy for the preparation of robust stir bar coatings based on the combination of montmorillonite with epoxy resin. The composite stir bar was implemented in a novel automated multisyringe stir bar sorptive extraction system (MS-SBSE), and applied to the extraction of four chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol) as model compounds, followed by high performance liquid chromatography-diode array detection. The different experimental parameters of the MS-SBSE, such as sample volume, selection of the desorption solvent, desorption volume, desorption time, sample solution pH, salt effect and extraction time were studied. Under the optimum conditions, the detection limits were between 0.02 and 0.34μgL(-1). Relative standard deviations (RSD) of the method for the analytes at 10μgL(-1) concentration level ranged from 3.5% to 4.1% (as intra-day RSD) and from 3.9% to 4.3% (as inter-day RSD at 50μgL(-1) concentration level). Batch-to-batch reproducibility for three different stir bars was 4.6-5.1%. The enrichment factors were between 30 and 49. In order to investigate the capability of the developed technique for real sample analysis, well water, wastewater and leachates from a solid waste treatment plant were satisfactorily analyzed.

  15. Implant-retained mandibular bar-supported overlay dentures: a finite element stress analysis of four different bar heights.

    Science.gov (United States)

    Rismanchian, Mansoor; Dakhilalian, Mansour; Bajoghli, Farshad; Ghasemi, Ehsan; Sadr-Eshkevari, Pooyan

    2012-04-01

    Proper stress distribution on dental implants is necessary in bar-retained implant overlay dentures. We aimed to comparatively assess this stress distribution according to different bar heights using finite element models. A three-dimensional (3D) computer model of mandible with 2 implants (ITI, 4.1 mm diameter and 12 mm length) in canine areas and an overlying implant-supported bar-retained overlay denture were simulated with 0-, 1-, 2-, and 3-mm bar heights using ABAQUS software. A vertical force was applied to the left first molar and gradually increased from 0 to 50 N. The resultant stress distribution was evaluated. Bars of 1 and 2 mm in height transferred the least stress to the implants (3.882 and 3.896 MPa, respectively). The 0-mm height of the bar connection transferred the highest stress value (4.277 MPa). The amount of stress transferred by 3-mm heights of the bar connection was greater than that of 1- and 2-mm bar connections and smaller than that of 0-mm bar connection (4.165 kgN). This 3D finite element analysis study suggested that the use of Dolder bar attachment with 1- and 2-mm heights could be associated with appropriate stress distribution for implant-retained overlay dentures.

  16. Unconventional Reservoirs: Ideas to Commercialization

    Science.gov (United States)

    Tinker, S. W.

    2015-12-01

    There is no shortage of coal, oil, and natural gas in the world. What are sometimes in short supply are fresh ideas. Scientific innovation combined with continued advances in drilling and completion technology revitalized the natural gas industry in North America by making production from shale economic. Similar advances are now happening in shale oil. The convergence of ideas and technology has created a commercial environment in which unconventional reservoirs could supply natural gas to the North American consumer for 50 years or more. And, although not as far along in terms of resource development, oil from the Eagle Ford and Bakken Shales and the oil sands in Alberta could have a similar impact. Without advanced horizontal drilling, geosteering, staged hydraulic-fracture stimulation, synthetic and natural proppants, evolution of hydraulic fluid chemistry, and high-end monitoring and simulation, many of these plays would not exist. Yet drilling and completion technology cannot stand alone. Also required for success are creative thinking, favorable economics, and a tolerance for risk by operators. Current understanding and completion practices will leave upwards of 80% of oil and natural gas in the shale reservoirs. The opportunity to enhance recovery through advanced reservoir understanding and imaging, as well as through recompletions and infill drilling, is considerable. The path from ideas to commercialization will continue to provide economic results in unconventional reservoirs.

  17. Prevention of Reservoir Interior Discoloration

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, K.F.

    2001-04-03

    Contamination is anathema in reservoir production. Some of the contamination is a result of welding and some appears after welding but existed before. Oxygen was documented to be a major contributor to discoloration in welding. This study demonstrates that it can be controlled and that some of the informal cleaning processes contribute to contamination.

  18. Indiana continent catheterizable urinary reservoir.

    Science.gov (United States)

    Castillo, O A; Aranguren, G; Campos-Juanatey, F

    2014-01-01

    Radical pelvic surgery requires continent or incontinent urinary diversion. There are many techniques, but the orthotopic neobladder is the most used. A continent catheterizable urinary reservoir is sometimes a good alternative when this derivation is not possible or not indicated. This paper has aimed to present our experience with the Indiana pouch continent urinary reservoir. The series is made up of 85 patients, 66 women and 19 men, with a mean age of 56 years (31-77 years). Variables analyzed were operating time, estimated blood loss, transfusion rate, hospital stay and peri-operatory complications. The main indication in 49 cases was resolution of complications related to the treatment of cervical cancer. Average operation time was 110.5 minutes (range 80-130 minutes). Mean blood loss was 450 cc (100-1000 cc). Immediate postoperative complications, all of which were treated medically, occurred in 16 patients (18.85%). One patient suffered anastomotic leakage. Hospital stay was 19 days (range 5-60 days) and there was no mortality in the series. Late complications occurred in 26 patients (32%), these being ureteral anastomotic stenosis in 11 cases, cutaneous stoma stenosis in 9 cases and reservoir stones in 6 cases. The Indiana continent catheterizable urinary reservoir is a valid option for the treatment of both urological and gynecological malignancies as well as for the management of pelvic morbidity related to the treatment of pelvic cancers. Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.

  19. Data assimilation in reservoir management

    NARCIS (Netherlands)

    Rommelse, J.R.

    2009-01-01

    The research presented in this thesis aims at improving computer models that allow simulations of water, oil and gas flows in subsurface petroleum reservoirs. This is done by integrating, or assimilating, measurements into physics-bases models. In recent years petroleum technology has developed

  20. Reservoir Cathode for Electric Space Propulsion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a reservoir cathode to improve performance in both ion and Hall-effect thrusters. We propose to adapt our existing reservoir cathode technology to this...

  1. Reservoir Cathode for Electric Space Propulsion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a hollow reservoir cathode to improve performance in ion and Hall thrusters. We will adapt our existing reservoir cathode technology to this purpose....

  2. RESERVOIR CHARACTERIZATION USING SEISMIC AND WELL ...

    African Journals Online (AJOL)

    Osondu

    2012-06-19

    Jun 19, 2012 ... Key words: Reservoir sand, Well log, Water saturation, Linear and Steiber. Introduction. Reservoir ... During analysis, seismic data can quantitatively predict ..... Wireline and Testing, Houston Texas, pp. 21 –. 89. Wan Qin ...

  3. Anti-seismic behavior of HRB400 reinforced steel bars

    Institute of Scientific and Technical Information of China (English)

    QIN Bin; SHENG Guang-min; GONG Shi-hong

    2005-01-01

    The properties of anti-seismic HRB400 steel bars with 25 mm diameter were systematically investigated. The results showed that the properties of the HRB400 reinforced steel bars had been greatly enhanced comparing with HRB335 steel bars, i.e. coordination of strength and ductility, strain-aging sensibility, low temperature impact toughness, weld ability and high strain low cycle fatigue. The ductile-brittle transit temperatures of hot-rolled and strain-aged steel bars were evaluated as -17℃ and-8℃ respectively, and the low temperature impact toughness of HRB400 steel bars remains to be improved. Transmission electron microscopy (TEM) and electron diffraction showed little vanadium existed in ferrite as VN, most of which existed in pearlite as alloy cementite which resulted in the declination of impact toughness. Methods were suggested to improve the anti-seismic properties of steel bars.

  4. Shepherding Tidal Debris with the Galactic Bar: The Ophiuchus Stream

    CERN Document Server

    Hattori, Kohei; Sanders, Jason L

    2015-01-01

    The dynamics of stellar streams in rotating barred potentials is explained for the first time. Naturally, neighbouring stream stars reach pericentre at slightly different times. In the presence of a rotating bar, these neighbouring stream stars experience different bar orientations during pericentric passage and hence each star receives a different torque from the bar. These differing torques reshape the angular momentum and energy distribution of stars in the stream, which in turn changes the growth rate of the stream. For a progenitor orbiting in the same sense as the bar's rotation and satisfying a resonance condition, the resultant stream can be substantially shorter or longer than expected, depending on whether the pericentric passages of the progenitor occur along the bar's minor or major axis respectively. We present a full discussion of this phenomenon focusing mainly on streams confined to the Galactic plane. In stark contrast with the evolution in static potentials, which give rise to streams that g...

  5. Barómetro industrial LEON 50

    Directory of Open Access Journals (Sweden)

    Javier Álvarez Martínez

    2005-12-01

    Full Text Available El Barómetro indusrial LEON 50 es un trabajo de investigación que tiene como objetivo esencial identificar características patrimoniales, financieras y económicas de una muestra de empresas que actúan dentro de la industria leonesa. El soporte de este estudio empírico es la información contable anual auditada que depositan en el Registro Mercantil las empresas integrantes de la muestra, recogida básicamente en el balance de situación, la cuenta de pérdidas y ganacias y el cuadro de finaciación referidos al bienio 2001-02. En esencia, el Barómetro Industrial LEON 50 pretende ser un avance en el análisis, diagnóstico y mejor conocimiento de la industria regional, aportando una visión actualizada sobre estrategias y pautas de actuación empresarial que serán objeto de observación en períodos

  6. Australian Marsh Beetles (Coleoptera: Scirtidae). 8. The new genera Cygnocyphon, Eximiocyphon, Paracyphon, Leptocyphon, Tectocyphon, and additions to Contacyphon de Gozis, Nanocyphon Zwick and Eurycyphon Watts.

    Science.gov (United States)

    Zwick, Peter

    2015-07-07

    New monotypic genera proposed are: Cygnocyphon ibex n. gen., n. sp., Eximiocyphon excisus n. gen., n. sp., and Paracyphon avicularis n. gen., n. sp. Also proposed are the new genera Leptocyphon n. gen., with L. furcalonga, n. sp. and L. quadricornutus, n. sp., Tectocyphon n. gen., with T. microphallus n. sp., T. hirsutus n. sp., and T. victoriae n. sp. The diagnosis of genus Eurycyphon Watts is amended, E. fulvus Watts and E. aquilus Watts are partly redescribed. New species are: Eurycyphon barringtoni n. sp., E. castaneus n. sp., E. falcatus n. sp., E. parvus n. sp., E. perlatus n. sp., E. thunguttii, n. sp., E. tomweiri n. sp., and E. tricornis n. sp. Species of Nanocyphon are discussed and N. tasmanicus n. sp. is described. Contacyphon forcipatus n. sp. is described and an apparently introduced population of the European Contacyphon putonii Gozis is reported from West Australia. For comparison with some of the new taxa the redescription of Pseudomicrocara orientalis Armstrong, type species of the genus, is supplemented.

  7. High Energy Gas Fracturing in Deep Reservoir

    Institute of Scientific and Technical Information of China (English)

    Zhang Qiangde; Zhao Wanxiang; Wang Faxuan

    1994-01-01

    @@ Introduction The HEGF technology has many merits such as low cost, simple work conditions, treating the thin reservoir without layer dividing tools, no contamination to the reservoirs and connections with more natural fractures. So it is suitable to treat thin reservoirs,water and acid senstive reservoirs and the reserviors with natural fissures and also suitable to evaluate the production test of new wells, blocking removing treatment, increasing injection treatment and the treatment for the hydrofracturing well with some productivity.

  8. Reservoir resistivity characterization incorporating flow dynamics

    KAUST Repository

    Arango, Santiago

    2016-04-07

    Systems and methods for reservoir resistivity characterization are provided, in various aspects, an integrated framework for the estimation of Archie\\'s parameters for a strongly heterogeneous reservoir utilizing the dynamics of the reservoir are provided. The framework can encompass a Bayesian estimation/inversion method for estimating the reservoir parameters, integrating production and time lapse formation conductivity data to achieve a better understanding of the subsurface rock conductivity properties and hence improve water saturation imaging.

  9. $B_s$-$\\bar{B_s}$ mixing from lattice QCD

    CERN Document Server

    Blossier, B

    2005-01-01

    We study the $B^0_s-\\bar{B^0_s}$ mixing amplitude in Standard Model by computing the relevant hadronic matrix element in the static limit of lattice HQET with the Neuberger light quark action. In the quenched approximation, and after matching to the $\\bar{\\rm MS}$ scheme in QCD, we obtain $\\hat{B}^{\\bar{\\rm MS},{\\rm NLO}}_{B_s}(m_b)=0.940(16)(22)$.

  10. Cereal and nut bars, nutritional quality and storage stability.

    Science.gov (United States)

    Estévez, A M; Escobar, B; Vásquez, M; Castillo, E; Araya, E; Zacarías, I

    1995-06-01

    Six snack-type bars were manufactured, to contain oat and wheat germ and two different walnut levels, agglutinated with natural sweeteners and fats. Two bars also contained toasted amaranth with brown sugar cover and wheat extrudate, while two others, contained puffed instead of toasted amaranth. Water activity (Aw) and moisture were determined in the manufactured products. Quality and sensory evaluation and proximate analysis were carried out on the bars containing highest levels of walnuts (18%). The caloric contribution of the bars was computed by Atwater methods. The nutritional quality of the bars was determined by means of the Protein Efficiency Ratio (PER) and Net Protein Ratio (NPR), and the results were used to obtain relative PER and relative NPR. Samples of the latter bars were kept under accelerated storage for 15 days at 37 degrees C and analyzed every 5 days to determine their Aw, moisture, peroxide and sensory acceptability. The drying time for the cereal - and walnut - based bars was 45 min at 120 degrees C. All bars presented a good fiber supply and the CN1 bar, containing only oat, wheat germ and walnut, had the greatest protein content. In the sensory evaluation, the walnut level with the greatest preference was 18%. PER and NPR values of the bars did not differ significantly showing values approximately 86% that of the casein value. During storage, the moisture and Aw decreased in all the bars. Peroxides remained within the acceptable ranges; acceptability based on sensory evaluation remained best in the bar with toasted amaranth.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Faraday resonance in dynamical bar instability of differentially rotating stars

    CERN Document Server

    Saijo, Motoyuki

    2008-01-01

    We investigate the nonlinear behaviour of the dynamically unstable rotating star for the bar mode by three-dimensional hydrodynamics in Newtonian gravity. We find that an oscillation along the rotation axis is induced throughout the growth of the unstable bar mode, and that its characteristic frequency is twice as that of the bar mode, which oscillates mainly along the equatorial plane. A possibility to observe Faraday resonance in gravitational waves is demonstrated and discussed.

  12. STABILIZER BARS – CALCULATIONS, CONSTRUCTION AND PRODUCTION METHODS

    Directory of Open Access Journals (Sweden)

    Adam Marek WITTEK

    2015-06-01

    Full Text Available The article outlines the calculation and production methods for stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction and manufacturing of stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  13. Economic Impact of Cruise Ship Passengers in Bar Harbor, Maine

    OpenAIRE

    Gabe, Todd; Lynch, Colleen; McConnon, James; Allen, Thomas

    2003-01-01

    This report examines the economic impact of cruise ship passengers in Bar Harbor, Maine. In 2002, 64 cruise ships docked in Bar Harbor carrying about 120,000 passengers and crewmembers. The analysis presented in the report is based on 1,080 passenger surveys conducted between August and October of 2002. Economic impact figures are based on a total of 97,190 passengers, which is the capacity of the 64 cruise ships that were scheduled to visit Bar Harbor in 2002.

  14. Mechanistic Processes Controlling Gas Sorption in Shale Reservoirs

    Science.gov (United States)

    Schaef, T.; Loring, J.; Ilton, E. S.; Davidson, C. L.; Owen, T.; Hoyt, D.; Glezakou, V. A.; McGrail, B. P.; Thompson, C.

    2014-12-01

    Utilization of CO2 to stimulate natural gas production in previously fractured shale-dominated reservoirs where CO2 remains in place for long-term storage may be an attractive new strategy for reducing the cost of managing anthropogenic CO2. A preliminary analysis of capacities and potential revenues in US shale plays suggests nearly 390 tcf in additional gas recovery may be possible via CO2 driven enhanced gas recovery. However, reservoir transmissivity properties, optimum gas recovery rates, and ultimate fate of CO2 vary among reservoirs, potentially increasing operational costs and environmental risks. In this paper, we identify key mechanisms controlling the sorption of CH4 and CO2 onto phyllosilicates and processes occurring in mixed gas systems that have the potential of impacting fluid transfer and CO2 storage in shale dominated formations. Through a unique set of in situ experimental techniques coupled with molecular-level simulations, we identify structural transformations occurring to clay minerals, optimal CO2/CH4 gas exchange conditions, and distinguish between adsorbed and intercalated gases in a mixed gas system. For example, based on in situ measurements with magic angle spinning NMR, intercalation of CO2 within the montmorillonite structure occurs in CH4/CO2 gas mixtures containing low concentrations (<5 mol%) of CO2. A stable montmorillonite structure dominates during exposure to pure CH4 (90 bar), but expands upon titration of small fractions (1-3 mol%) of CO2. Density functional theory was used to quantify the difference in sorption behavior between CO2 and CH4 and indicates complex interactions occurring between hydrated cations, CH4, and CO2. The authors will discuss potential impacts of these experimental results on CO2-based hydrocarbon recovery processes.

  15. Amplitude various angles (AVA) phenomena in thin layer reservoir: Case study of various reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Nurhandoko, Bagus Endar B., E-mail: bagusnur@bdg.centrin.net.id, E-mail: bagusnur@rock-fluid.com [Wave Inversion and Subsurface Fluid Imaging Research Laboratory (WISFIR), Basic Science Center A 4" t" hfloor, Physics Dept., FMIPA, Institut Teknologi Bandung (Indonesia); Rock Fluid Imaging Lab., Bandung (Indonesia); Susilowati, E-mail: bagusnur@bdg.centrin.net.id, E-mail: bagusnur@rock-fluid.com [Rock Fluid Imaging Lab., Bandung (Indonesia)

    2015-04-16

    Amplitude various offset is widely used in petroleum exploration as well as in petroleum development field. Generally, phenomenon of amplitude in various angles assumes reservoir’s layer is quite thick. It also means that the wave is assumed as a very high frequency. But, in natural condition, the seismic wave is band limited and has quite low frequency. Therefore, topic about amplitude various angles in thin layer reservoir as well as low frequency assumption is important to be considered. Thin layer reservoir means the thickness of reservoir is about or less than quarter of wavelength. In this paper, I studied about the reflection phenomena in elastic wave which considering interference from thin layer reservoir and transmission wave. I applied Zoeppritz equation for modeling reflected wave of top reservoir, reflected wave of bottom reservoir, and also transmission elastic wave of reservoir. Results show that the phenomena of AVA in thin layer reservoir are frequency dependent. Thin layer reservoir causes interference between reflected wave of top reservoir and reflected wave of bottom reservoir. These phenomena are frequently neglected, however, in real practices. Even though, the impact of inattention in interference phenomena caused by thin layer in AVA may cause inaccurate reservoir characterization. The relation between classes of AVA reservoir and reservoir’s character are different when effect of ones in thin reservoir and ones in thick reservoir are compared. In this paper, I present some AVA phenomena including its cross plot in various thin reservoir types based on some rock physics data of Indonesia.

  16. 33 CFR 211.81 - Reservoir areas.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Reservoir areas. 211.81 Section... Lands in Reservoir Areas Under Jurisdiction of Department of the Army for Cottage Site Development and Use § 211.81 Reservoir areas. Delegations, rules and regulations in §§ 211.71 to 211.80 are...

  17. Tenth workshop on geothermal reservoir engineering: proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-22

    The workshop contains presentations in the following areas: (1) reservoir engineering research; (2) field development; (3) vapor-dominated systems; (4) the Geysers thermal area; (5) well test analysis; (6) production engineering; (7) reservoir evaluation; (8) geochemistry and injection; (9) numerical simulation; and (10) reservoir physics. (ACR)

  18. Gravity observations for hydrocarbon reservoir monitoring

    NARCIS (Netherlands)

    Glegola, M.A.

    2013-01-01

    In this thesis the added value of gravity observations for hydrocarbon reservoir monitoring and characterization is investigated. Reservoir processes and reservoir types most suitable for gravimetric monitoring are identified. Major noise sources affecting time-lapse gravimetry are analyzed. The ad

  19. Shanghai’s Bars:Urban Romance and Sadness

    Institute of Scientific and Technical Information of China (English)

    LiuSha

    2002-01-01

    When speaking of Shanghai’s bars, what comes to people’s minds first must be Hengshan Street, a road known for its variety of bars. For many people, Hengshan Street is a landmark. On this street, bars in bold and unrestrained styles appeal to visitors. In fact, the whole street is a large open bar: the hurly-burly of "Hello" permeates every corner of the street; the resonant singing of "Rainbow Potato" echoes in the night sky; the rock’n roll of "Full House" fascinates passers-by with the wildness of John Lennon; even

  20. Comparing photometric results of real and N-body bars

    CERN Document Server

    Athanassoula, E; Carrasco, L; Bosma, A; De Souza, R E; Recillas, E

    2009-01-01

    We compare the results of the photometrical analysis of barred galaxies with those of a similar analysis from N-body simulations. The photometry is for a sample of nine barred galaxies observed in the J and Ks bands with the CANICA near infrared (NIR) camera at the 2.1-m telescope of the Observatorio Astrofisico Guillermo Haro (OAGH) in Cananea, Sonora, Mexico. The comparison includes radial ellipticity profiles and surface brightness (density for the N-body galaxies) profiles along the bar major and minor axes. We find very good agreement, arguing that the exchange of angular momentum within the galaxy plays a determinant role in the evolution of barred galaxies.

  1. Musculoskeletal demands of progressions for the longswing on high bar.

    Science.gov (United States)

    Irwin, Gareth; Kerwin, David G

    2007-09-01

    Kinetic analyses of the chalked bar longswing on high bar and its associated progressions were used to explain musculoskeletal contributions during the performance of these skills. Data on four international male gymnasts performing three series of chalked bar longswings and eight progressions were recorded. Customized body segment inertia parameters, two-dimensional kinematics (50 Hz), and bar forces (1000 Hz) were used as input to inverse dynamic modelling. The analysis focused on the relative contributions of the knees, hips, and shoulders with root mean squared differences between the chalked bar longswing and the progressions being used to rank the progressions. Seventy per cent of the total work occurred between 200 degrees and 240 degrees of angular rotation in the longswing, 67% of which was contributed by the shoulders. The shoulders were also dominant in all progressions, with the largest such contribution occurring in the looped bar longswing with "no action". The least similar progression was the looped bar pendulum swing, while the most similar was the chalked bar bent knee longswing. This study provides a useful means for ranking progressions based on their kinetic similarity to the chalked bar longswing and builds on earlier research in identifying that progressions can be classified into those similar in physical demand (kinetics) and those similar in geometry (kinematics).

  2. Prediction of Vibration Transmission within Periodic Bar Structures

    DEFF Research Database (Denmark)

    Domadiya, Parthkumar Gandalal; Andersen, Lars Vabbersgaard; Sorokin, Sergey

    2012-01-01

    The present analysis focuses on vibration transmission within semi-infinite bar structure. The bar is consisting of two different materials in a periodic manner. A periodic bar model is generated using two various methods: The Finite Element method (FEM) and a Floquet theory approach. A parameter...... study is carried out regarding the influence of the number of periods at various frequencies within a semi-infinite bar, stop bands are illustrated at certain periodic intervals within the structure. The computations are carried out in frequency domain in the range below 500 Hz. Results from both...

  3. Non-uniform impact excitation of a cylindrical bar

    Science.gov (United States)

    Karp, Baruch; Dorogoy, Avraham; Wang, Zonggang

    2009-06-01

    An experimental and numerical study of a non-uniform impact excitation of a circular bar is reported. In experiments, nine strikers with different contact area were accelerated against a circular bar. Axial surface strain of the impacted bar was measured at several distances from the impinged end to include the near and the far fields. The same experimental conditions were solved numerically using a commercial finite element code. It was demonstrated that the far-field response is insensitive to both the size and the form of the striker's colliding end. The distance at which such insensitivity is set is estimated to be approximately one and a half bar diameters.

  4. Mechanical Engineering Safety Note PEPC Spreader Bar Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Mason, D.

    2001-08-26

    The PEPC Spreader Bar Assembly consists of a spreader bar that will be attached to the PEPC Cell Housing or the Midplane Transportation Fixture during operation. While in use in the OAB (Optics Assembly Building), the Spreader Bar Assembly will be manipulated by the NOID (New Optics Insertion Device). The other critical components of the assembly are the three angular contact bearing swivels that attach the spreader bar to the lifting mechanism and the corner clamps which are used to capture the Cell Housing.

  5. Strain analysis of nonlocal viscoelastic Kelvin bar in tension

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xue-chuan; LEI Yong-jun; ZHOU Jian-ping

    2008-01-01

    Based on viscoelastic Kelvin model and nonlocal relationship of strain and stress, a nonlocal constitutive relationship of viscoelasticity is obtained and the strain response of a bar in tension is studied. By transforming governing equation of the strain analysis into Volterra integration form and by choosing a symmetric exponential form of kernel function and adapting Neumann series, the closed-form solution of strain field of the bar is obtained. The creep process of the bar is presented. When time approaches infinite, the strain of bar is equal to the one of nonlocal elasticity.

  6. On the bar formation mechanism in galaxies with cuspy bulges

    Science.gov (United States)

    Polyachenko, E. V.; Berczik, P.; Just, A.

    2016-11-01

    We show by numerical simulations that a purely stellar dynamical model composed of an exponential disc, a cuspy bulge, and a Navarro-Frenk-White halo with parameters relevant to the Milky Way is subject to bar formation. Taking into account the finite disc thickness, the bar formation can be explained by the usual bar instability, in spite of the presence of an inner Lindblad resonance, that is believed to damp any global modes. The effect of replacing the live halo and bulge by a fixed external axisymmetric potential (rigid models) is studied. It is shown that while the e-folding time of bar instability increases significantly (from 250 to 500 Myr), the bar pattern speed remains almost the same. For the latter, our average value of 55 km s-1 kpc-1 agrees with the assumption that the Hercules stream in the solar neighbourhood is an imprint of the bar-disc interaction at the outer Lindblad resonance of the bar. Vertical averaging of the radial force in the central disc region comparable to the characteristic scale length allows us to reproduce the bar pattern speed and the growth rate of the rigid models, using normal mode analysis of linear perturbation theory in a razor-thin disc. The strong increase of the e-folding time with decreasing disc mass predicted by the mode analysis suggests that bars in galaxies similar to the Milky Way have formed only recently.

  7. Stability of cassava flour-based food bars

    Directory of Open Access Journals (Sweden)

    Erica Caroline da Silva

    2013-03-01

    Full Text Available The consumption of Brazilian cassava has been reduced due to a lack of adjustment to the modern lifestyle. To reverse this trend, new products could be developed specifically targeted to high-value niche markets. Cereal bars stand out as fast food high in nutritional value. A bar formula mimicking cereal bars was prepared using a mixture of Brazilian cassava flour, hydrogenated vegetable fat, dried bananas, ground cashew nuts, and glucose syrup. After being pressed, the bars were dried for 1 hour at 65 °C, packaged in films, and stored under ambient conditions. Its stability was continuously monitored for 210 days in order to ensure its safety and enable its introduction to the market. Texture loss was observed in the packed bars after 90 days of storage, but the sensory characteristics allowed the testers to perceive this tendency after only 30 days of storage. However, chemical, physical, and microbial analyses confirmed that the bars were safe for consumption for 180 days. The results showed that a 45 g cassava flour-based bar enriched with nuts and dried fruits can meet 6% of the recommended daily fiber intake with a caloric value between that of the common cereal bar and that of an energy bar. Adapting the formula with ingredients (fruits, nuts from different regions of Brazil may add value to this traditional product as a fast food.

  8. Multipacting Analysis of the Superconducting Parallel-bar Cavity

    Energy Technology Data Exchange (ETDEWEB)

    S.U. De Silva, J.R. Delayen,

    2011-03-01

    The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. Multipacting can be a limiting factor to the performance of in any superconducting structure. In the parallel-bar cavity the main contribution to the deflection is due to the transverse deflecting voltage, between the parallel bars, making the design potentially prone to multipacting. This paper presents the results of analytical calculations and numerical simulations of multipacting in the parallel-bar cavity with resonant voltage, impact energies and corresponding particle trajectories.

  9. The Quark Flavor Violating Higgs Decay $h \\rightarrow \\bar b s + b \\bar s$ in the MSSM

    CERN Document Server

    Gómez, M E; Rehman, M

    2015-01-01

    We study the quark flavor violating Higgs-boson decay $h \\rightarrow \\bar b s + b \\bar s$ in the Minimal Supersymmetric Standard Model (MSSM). The decay is analyzed first in a model independent, and in a second step in the minimal flavor violationg (MFV) Constrained MSSM. The experimental constraints from $B$-Physics observables (BPO) and electroweak precision observables (EWPO) are also calculated and imposed on the parameter space. It is shown that in some cases the EWPO restrict the flavor violating parameter space stronger than the BPO. In the model independent analysis values of ${\\cal O}(10^{-4})$ can be found for ${\\rm BR}(h \\rightarrow \\bar b s + b \\bar s)$. In the MFV CMSSM such results can only be obtained in very restricted parts of the parameter space. The results show that it is not excluded to observe the decay $h \\rightarrow \\bar b s + b \\bar s$ in the MSSM at future $e^+e^-$ colliders.

  10. Probe $\\Lambda - \\bar{\\Lambda}$ oscillation in $J/\\psi \\rightarrow \\Lambda\\,\\bar\\Lambda$ decay at BES-III

    OpenAIRE

    Kang, X. W.; H.B. Li; Lu, G. R.

    2010-01-01

    We discuss the possible searching for the oscillation by coherent $\\Lambda\\bar{\\Lambda}$ production in $J/\\psi \\rightarrow \\Lambda \\bar{\\Lambda}$ decay process. The sensitivity of measurement of $\\Lambda - \\bar{\\Lambda}$ oscillation in the external field at BES-III experiment is considered. These considerations indicate an alternative way to probe the $\\Delta B =2$ amplitude in addition to neutron oscillation experiments. Both coherent and time-dependent information can be used to extract $\\L...

  11. James Watt: a trajetória que levou ao desenvolvimento da máquina a vapor vista por seus biógrafos e homens de ciências

    OpenAIRE

    Tavares, Luiz Alberto

    2008-01-01

    Esta dissertação tem por objetivo a abordagem do trabalho do escocês James Watt no aperfeiçoamento da máquina a vapor. Este levantamento foi feito a partir de estudos de historiadores do século XIX contemporâneos a Watt e historiadores do século XX que vêem Watt de forma mais crítica. Abordamos também o relacionamento de Watt com seus parceiros, tanto na Universidade de Glasgow, como na Lunar Society, além de sua parceria com Thomas Boulton estabelecida para a comercialização da máquina. A...

  12. 4. International reservoir characterization technical conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This volume contains the Proceedings of the Fourth International Reservoir Characterization Technical Conference held March 2-4, 1997 in Houston, Texas. The theme for the conference was Advances in Reservoir Characterization for Effective Reservoir Management. On March 2, 1997, the DOE Class Workshop kicked off with tutorials by Dr. Steve Begg (BP Exploration) and Dr. Ganesh Thakur (Chevron). Tutorial presentations are not included in these Proceedings but may be available from the authors. The conference consisted of the following topics: data acquisition; reservoir modeling; scaling reservoir properties; and managing uncertainty. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.

  13. INFLUENCING OF FRICTION IN HINGES FORCE SIZE OF BARS

    Directory of Open Access Journals (Sweden)

    BOHOMAZ V. N.

    2016-04-01

    Full Text Available Formulation of the problem. The size of critical force of bar on the traditional method of calculation is determined in supposition of ideal hinge in the place of fixing of bar. There are both a hinge resistance at the turn of bar ends and their moving in the real hinges. Thus, there is the necessity of influencing character determination of these hinge imperfections on the size of critical force. In the existent scientific labours is devoted the alike problems, influencing of friction in the hinges of bar fastening on the size of critical force was not taken into account. At determination of bars stability with no ideality of hinges friction in them it is possible to take into account by the eccentric appendix of loading or appendix of moment. However at such approach it is difficult enough to define the size of attached force or moment. Purpose. To set influencing of friction in the hinge of bar fastening on of his critical force size in sense of Euler, and also build dependences for determination of bar critical force taking into account mechanical descriptions of hinges materials. Conclusion. For the task of determination the size of bar critical force with the joint fastening on ends are got the dependences which take into account mechanical descriptions of material hinge. The received dependences allow to define more exact meaning of critical force for bars. The examples of calculation of whole bar and bar with undercuting in the middle are resulted that values of critical force, certain on a traditional method are overpriced.

  14. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

  15. /bar p/p collider physics

    Energy Technology Data Exchange (ETDEWEB)

    Green, D.

    1989-03-01

    This note encompasses a set of six lectures given at the summer school held at Campos Do Jordao in January of 1989 near Sao Paulo, Brazil. The intent of the lectures was to describe the physics of /bar p/p at CERN and Fermilab. Particular attention has been paid to making a self contained presentation to a prospective audience of graduate students. Since large Monte Carlo codes might not be available to all members of this audience, great reliance was placed on ''back of the envelope estimates.'' Emphasis was also placed on experimental data rather than theoretical speculation, since predictions for, for example, supersymmetric particle production are easily obtained by transcription of formulae already obtained. 9 refs., 67 figs., 2 tabs.

  16. Human Rights and Dignity Behind Bars.

    Science.gov (United States)

    Maschi, Tina; Richter, Marina

    2017-01-01

    Death and dying in prisons constitute a topic of growing importance across the globe. Based on the contributions made in this special issue, we reflect on current debates and outline recommendations for dialogue and practice. Scientific dialogue across the Atlantic, and across the globe, provides insights into different national carceral systems and their ways of dealing with end of life behind bars. At the same time, the comparison also helps to identify basic needs and practices that can work in various settings. We identify several issues where further efforts need to be taken to deepen the dialogue. A common ground for all advancement of legislation and practice constitute the minimal level of rights to which every human being is entitled.

  17. Bars and spheroids in gravimetry problem

    CERN Document Server

    Sizikov, Valery

    2016-01-01

    The direct gravimetry problem is solved by dividing each deposit body into a set of vertical adjoining bars, whereas in the inverse problem, each deposit body is modelled by a homogeneous ellipsoid of revolution (spheroid). Well-known formulae for the z-component of gravitational intensity for a spheroid are transformed to a convenient form. Parameters of a spheroid are determined by minimizing the Tikhonov smoothing functional with constraints on the parameters, which makes the ill-posed inverse problem by unique and stable. The Bulakh algorithm for initial estimating the depth and mass of a deposit is modified. The proposed technique is illustrated by numerical model examples of deposits in the form of two and five bodies. The inverse gravimetry problem is interpreted as a gravitational tomography problem or, in other words, as "introscopy" of Earth's crust and mantle.

  18. The role of reservoir characterization in the reservoir management process (as reflected in the Department of Energy`s reservoir management demonstration program)

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, M.L. [BDM-Petroleum Technologies, Bartlesville, OK (United States); Young, M.A.; Madden, M.P. [BDM-Oklahoma, Bartlesville, OK (United States)] [and others

    1997-08-01

    Optimum reservoir recovery and profitability result from guidance of reservoir practices provided by an effective reservoir management plan. Success in developing the best, most appropriate reservoir management plan requires knowledge and consideration of (1) the reservoir system including rocks, and rock-fluid interactions (i.e., a characterization of the reservoir) as well as wellbores and associated equipment and surface facilities; (2) the technologies available to describe, analyze, and exploit the reservoir; and (3) the business environment under which the plan will be developed and implemented. Reservoir characterization is the essential to gain needed knowledge of the reservoir for reservoir management plan building. Reservoir characterization efforts can be appropriately scaled by considering the reservoir management context under which the plan is being built. Reservoir management plans de-optimize with time as technology and the business environment change or as new reservoir information indicates the reservoir characterization models on which the current plan is based are inadequate. BDM-Oklahoma and the Department of Energy have implemented a program of reservoir management demonstrations to encourage operators with limited resources and experience to learn, implement, and disperse sound reservoir management techniques through cooperative research and development projects whose objectives are to develop reservoir management plans. In each of the three projects currently underway, careful attention to reservoir management context assures a reservoir characterization approach that is sufficient, but not in excess of what is necessary, to devise and implement an effective reservoir management plan.

  19. Nonlinear Multigrid for Reservoir Simulation

    DEFF Research Database (Denmark)

    Christensen, Max la Cour; Eskildsen, Klaus Langgren; Engsig-Karup, Allan Peter

    2016-01-01

    A feasibility study is presented on the effectiveness of applying nonlinear multigrid methods for efficient reservoir simulation of subsurface flow in porous media. A conventional strategy modeled after global linearization by means of Newton’s method is compared with an alternative strategy...... modeled after local linearization, leading to a nonlinear multigrid method in the form of the full-approximation scheme (FAS). It is demonstrated through numerical experiments that, without loss of robustness, the FAS method can outperform the conventional techniques in terms of algorithmic and numerical...... efficiency for a black-oil model. Furthermore, the use of the FAS method enables a significant reduction in memory usage compared with conventional techniques, which suggests new possibilities for improved large-scale reservoir simulation and numerical efficiency. Last, nonlinear multilevel preconditioning...

  20. Coalbed methane reservoir boundaries and sealing mechanism

    Institute of Scientific and Technical Information of China (English)

    SU Xianbo; LIN Xiaoying; LIU Shaobo; SONG Yan

    2005-01-01

    It is important to investigate the coalbed methane reservoir boundaries for the classification, exploration, and development of the coalbed methane reservoir.Based on the investigation of the typical coalbed methane reservoirs in the world, the boundaries can be divided into four types: hydrodynamic boundary, air altered boundary,permeability boundary, and fault boundary. Hydrodynamic and air altered boundaries are ubiquitous boundaries for every coalbed methane reservoir. The four types of the fault sealing mechanism in the petroleum geological investigation (diagen- esis, clay smear, juxtaposition and cataclasis) are applied to the fault boundary of the coalbed methane reservoir. The sealing mechanism of the open fault boundary is the same with that of the hydrodynamic sealing boundary.The sealing mechanism of the permeability boundary is firstly classified into capillary pressure sealing and hydrocarbon concentration sealing. There are different controlling boundaries in coalbed methane reservoirs that are in different geological backgrounds. Therefore, the coalbed methane reservoir is diversiform.

  1. Reservoir compartmentalization assessment by using FTIR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Permanyer, A. [Dept. Geoquimica, Petrologia i Prospeccio Geologica, Universitat de Barcelona, Marti i Franques, s/n, 08028 - Barcelona, Catalonia (Spain); Rebufa, C.; Kister, J. [Universite d' Aix - Marseille III, Faculte des Sciences et Techniques de St. Jerome, CNRS UMR 6171, Laboratoire de Geochimie Organique Analytique et Environnement (GOAE), Case 561, 13397 Marseille Cedex 20 (France)

    2007-09-15

    Reservoir geochemistry has traditionally used the gas chromatographic fingerprinting method and star diagrams to provide evidence of petroleum reservoir compartmentalization. Recently alternative techniques such as Fourier Transform Infra Red (FTIR) spectroscopy have been postulated to aid the evaluation of reservoir compartmentalization, and to characterize the geochemical evolution of oils from individual reservoirs. FTIR spectroscopy was applied successfully in the Tarragona Basin, Offshore N.E. Spain, validating the method to identify oils from different reservoirs. Moreover the method was successfully applied to provide evidence of compositional differences in oils from a faulted reservoir (El Furrial field, Venezuela), in which GC fingerprints failed to differentiate the oils. FTIR spectroscopy therefore, proves to be a complementary tool for reservoir compartmentalization studies. (author)

  2. Controls on hydrocarbon occurrence and productivity in the F6 reservoir, Tin Fouye-Tabankort area, NW Illizi Basin

    Energy Technology Data Exchange (ETDEWEB)

    Alem, N.; Assassi, S.; Benhebouche, S.; Kadi, B. [CDR-Sonatrach, Boumerdes (Algeria)

    1998-12-31

    Several oil accumulations of various sizes have been found within the F6 reservoir of Upper Silurian-Lower Devonian age in the Tin Fouye region of the Illizi Basin, about 1500 km from Algiers. Lithologically, the F6 consists of interbedded sandstones and shales and is subdivided into units: M1, M2, A, B1, B2, C1, C2 and C3, the upper units often being missing through erosion. These reservoirs, which were deposited in offshore coastal bars and tidal channels, show a high degree of lateral and vertical facies variation. Study of the hydrology of the F6 reservoir shows that connate water and oil have been frequently flushed by fresh water in the most permeable units, particularly C1 and B2. This finding is supported by hydrochemical data, by the inclination of oil-water contacts and by a high observed hydraulic gradient. (author)

  3. Comparative Study of Basins within Palaeogene Seaway in East China and Cretaceous Seaway in North America and Its Reservoir Significance

    Institute of Scientific and Technical Information of China (English)

    Wu Xiantao

    2007-01-01

    The well known Cretaceous seaway in North America was recognized in the middle of the last century and the Palaeogene seaway in East China was proposed by the author recently. The two seaways located on the opposite sides of North Pacific Ocean may be not a coincidence,and a comparative study was made in this paper. The results show that the two seaways inundated basins share several similarities particularly in basin origin,filling processes and reservoir facies. It is suggested that reservoir facies of estuarine sandstone and shelf bar sandstone related to sea level fluctuation,which are well developed in the Cretaceous seaway covered basins in North America might have been also developed here in Palaeogene seaway inundated basins in East China. Therefore it is worth paying more attention to finding these new reservoir facies on this side of the Pacific ocean. Evidences of sedimentology and ichnology indicate that good prospects are likely.

  4. MIKROMITSETY- MIGRANTS IN MINGECHEVIR RESERVOIR

    Directory of Open Access Journals (Sweden)

    M. A. Salmanov

    2017-01-01

    Full Text Available Aim. It is hardly possible to predict the continued stability of the watercourse ecosystems without the study of biological characteristics and composition of organisms inhabiting them. In the last 35-40 years, environmental conditions of the Mingachevir reservoir are determined by the stationary anthropogenic pressure. It was found that such components of plankton as algae, bacteria and fungi play a leading role in the transformation and migration of pollutants. The role of the three groups of organisms is very important in maintaining the water quality by elimination of pollutants. Among the organisms inhabiting the Mingachevir Reservoir, micromycetes have not yet been studied. Therefore, the study of the species composition and seasonal dynamics, peculiarities of their growth and development in the environment with the presence of some of the pollutants should be considered to date.Methods. In order to determine the role of micromycetes-migrants in the mineralization of organic substrates, as an active participant of self-purification process, we used water samples from the bottom sediments as well as decaying and skeletonized stalks of cane, reeds, algae, macrophytes, exuvia of insects and fish remains submerged in water.Findings. For the first time, we obtained the data on the quality and quantity of microscopic mycelial fungi in freshwater bodies on the example of the Mingachevir water reservoir; we also studied the possibilities for oxygenating the autochthonous organic matter of allochthonous origin with micromycetes-migrants.Conclusions. It was found that the seasonal development of micromycetes-migrants within the Mingachevir reservoir is characterized by an increase in the number of species in the summer and a gradual reduction in species diversity in the fall. 

  5. 基于Mini-bar叠阵的百瓦级光栅-外腔光谱合束半导体激光光源%Hundred-watt Level Spectral Beam Combining Diode Laser Source Based on Mini-Bar Stack

    Institute of Scientific and Technical Information of China (English)

    谭昊; 孟慧成; 余俊宏; 杜维川; 王昭; 郭林辉; 田飞; 卢飞; 李建民

    2015-01-01

    半导体激光器光栅-外腔光谱合束是一种实现高亮度半导体激光(DL)输出的有效方法.本文采用mini-bar叠阵作为合束光源,有效减小了“smile”效应对合束效率的影响,匀化了合束后的快慢轴光束质量,便于进一步的光纤耦合输出.采用柱面镜作为外腔镜,有效抑制了合束中的互锁定现象,从而取代了传统的空间滤波,减小了系统规模.在工作电流为75A时得到了159W的高亮度DL输出,合束光谱宽度为11.97 nm,电光效率为47.35%.当工作电流为60A时,合束光的快慢轴光束质量分别为3.145 mm·mrad与3.554 mm·mrad.

  6. New Observables In the Decay Mode \\bar B_d \\-->\\bar K^{0*} \\ell^+ \\ell^-

    Energy Technology Data Exchange (ETDEWEB)

    Egede, U.; /Imperial Coll., London; Hurth, T.; /CERN /SLAC; Matias, J.; Ramon, M.; /Barcelona, IFAE; Reece, W.; /Imperial Coll., London

    2008-08-07

    We discuss the large set of observables available from the angular distributions of the decay {bar B}{sub d} {yields} {bar K}*{sup 0}{ell}{sup +}{ell}{sup -}. We present a NLO analysis of all observables based on the QCD factorization approach in the low-dilepton mass region and an estimate of {Lambda}/m{sub b} corrections. Moreover, we discuss their sensitivity to new physics. We explore the experimental sensitivities at LHCb (10 fb{sup -1}) and SuperLHCb (100 fb{sup -1}) based on a full-angular fit method and explore the sensitivity to right handed currents. We also show that the previously discussed transversity amplitude A{sub T}{sup (1)} cannot be measured at the LHCb experiment or at future B factory experiments as it requires a measurement of the spin of the final state particles.

  7. SEISMIC ATTENUATION FOR RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Joel Walls; M.T. Taner; Naum Derzhi; Gary Mavko; Jack Dvorkin

    2003-12-01

    We have developed and tested technology for a new type of direct hydrocarbon detection. The method uses inelastic rock properties to greatly enhance the sensitivity of surface seismic methods to the presence of oil and gas saturation. These methods include use of energy absorption, dispersion, and attenuation (Q) along with traditional seismic attributes like velocity, impedance, and AVO. Our approach is to combine three elements: (1) a synthesis of the latest rock physics understanding of how rock inelasticity is related to rock type, pore fluid types, and pore microstructure, (2) synthetic seismic modeling that will help identify the relative contributions of scattering and intrinsic inelasticity to apparent Q attributes, and (3) robust algorithms that extract relative wave attenuation attributes from seismic data. This project provides: (1) Additional petrophysical insight from acquired data; (2) Increased understanding of rock and fluid properties; (3) New techniques to measure reservoir properties that are not currently available; and (4) Provide tools to more accurately describe the reservoir and predict oil location and volumes. These methodologies will improve the industry's ability to predict and quantify oil and gas saturation distribution, and to apply this information through geologic models to enhance reservoir simulation. We have applied for two separate patents relating to work that was completed as part of this project.

  8. Gas inflow patterns and nuclear rings in barred galaxies

    Science.gov (United States)

    Shen, Juntai; Li, Zhi

    2017-06-01

    Nuclear rings, dust lanes, and nuclear spirals are common structures in the inner region of barred galaxies, with their shapes and properties linked to the physical parameters of the galaxies. We use high-resolution hydrodynamical simulations to study gas inflow patterns in barred galaxies, with special attention on the nuclear rings. The location and thickness of nuclear ringsare tightly correlated with galactic properties, such as the bar pattern speed and bulge central density, within certain ranges. We identify the backbone of nuclear rings with a major orbital family of bars. The rings form exactly at the radius where the residual angular momentum of inflowing gas balances the centrifugal force. We propose a new simple method to predict the bar pattern speed for barred galaxies possessing a nuclear ring, without actually doing simulations. We apply this method to some real galaxies and find that our predicted bar pattern speed compare reasonably well with other estimates. Our study may have important implications for using nuclear ringsto measure the parameters of real barred galaxies with detailed gas kinematics. We have also extended current hydrodynamical simulations to model gas features in the Milky Way.

  9. Mechanical Properties of Welded Deformed Reinforcing Steel Bars

    Directory of Open Access Journals (Sweden)

    Ghafur H. Ahmed

    2015-05-01

    Full Text Available Reinforcement strength, ductility and bendability properties are important components in design of reinforced concrete members, as the strength of any member comes mainly from reinforcement. Strain compatibility and plastic behaviors are mainly depending on reinforcement ductility. In construction practice, often welding of the bars is required. Welding of reinforcement is an instant solution in many cases, whereas welding is not a routine connection process. Welding will cause deficiencies in reinforcement bars, metallurgical changes and re-crystallization of microstructure of particles. Weld metal toughness is extremely sensitive to the welding heat input that decreases both of its strength and ductility. For determining the effects of welding in reinforcement properties, 48 specimens were tested with 5 different bar diameters, divided into six groups. Investigated parameters were: properties of un-welded bars; strength, ductility and density of weld metal; strength and ductility reduction due to heat input for bundled bars and transverse bars; welding effect on bars’ bending properties; behavior of different joint types; properties of three weld groove shapes also the locations and types of failures sections. Results show that, strength and elongation of the welded bars decreased by (10-40% and (30-60% respectively. Cold bending of welded bars and groove welds shall be prevented.

  10. Stellar, Gas, and Dark Matter Content of Barred Galaxies

    Science.gov (United States)

    Cervantes Sodi, Bernardo

    2017-01-01

    We select a sample of galaxies from the Sloan Digital Sky Survey Data Release 7 (SDSS-DR7) where galaxies are classified, through visual inspection, as hosting strong bars, weak bars, or as unbarred galaxies, and make use of H i mass and kinematic information from the Arecibo Legacy Fast ALFA survey catalog, to study the stellar, atomic gas, and dark matter content of barred disk galaxies. We find, in agreement with previous studies, that the bar fraction increases with increasing stellar mass. A similar trend is found with total baryonic mass, although the dependence is not as strong as with stellar mass, due to the contribution of gas. The bar fraction shows a decrease with increasing gas mass fraction. This anticorrelation between the likelihood of a galaxy hosting a bar with the gas richness of the galaxy results from the inhibiting effect the gas has in the formation of bars. We also find that for massive galaxies with stellar masses larger than 1010 M⊙, at fixed stellar mass, the bar fraction decreases with increasing global halo mass (i.e., halo mass measured up to a radius of the order of the H i disk extent).

  11. A Morphological and Statistical Analysis of Ansae in Barred Galaxies

    CERN Document Server

    Martinez-Valpuesta, I; Buta, R

    2007-01-01

    Many barred galaxies show a set of symmetric enhancements at the ends of the stellar bar, called {\\it ansae}, or the ``handles'' of the bar. The ansa bars have been in the literature for some decades, but their origin has still not been specifically addressed, although, they could be related to the growth process of bars. But even though ansae have been known for a long time, no statistical analysis of their relative frequency of occurrence has been performed yet. Similarly, there has been no study of the varieties in morphology of ansae even though significant morphological variations are known to characterise the features. In this paper, we make a quantitative analysis of the occurrence of ansae in barred galaxies, making use of {\\it The de Vaucouleurs Atlas of Galaxies} by Buta and coworkers. We find that $\\sim 40%$ of SB0's show ansae in their bars, thus confirming that ansae are common features in barred lenticulars. The ansa frequency decreases dramatically with later types, and hardly any ansae are fou...

  12. Nutrition Education Strategies: A Trip to the Salad Bar.

    Science.gov (United States)

    Nutter, June; Kotch, Anne

    1995-01-01

    Learning activities related to visiting a salad bar can help students apply basic nutrition concepts to real-life situations and make healthier choices at restaurants and in food preparation. The paper describes a class activity involving students in setting up a salad bar, making choices among ingredients and dressings, and taking home leftovers.…

  13. Barred galaxies in the EAGLE cosmological hydrodynamical simulation

    CERN Document Server

    Algorry, David G; Abadi, Mario G; Sales, Laura V; Bower, Richard G; Crain, Robert A; Vecchia, Claudio Dalla; Frenk, Carlos S; Schaller, Matthieu; Schaye, Joop; Theuns, Tom

    2016-01-01

    We examine the properties of barred disc galaxies in a LCDM cosmological hydrodynamical simulation from the EAGLE project. Our study follows the formation of 269 discs identified at z = 0 in the stellar mass range 10.6 < log Mstr /M < 11. These discs show a wide range of bar strengths, from unbarred discs to weak bars to strongly barred systems (= 20%). Bars in these systems develop after redshift = 1.3, on timescales that depend sen- sitively on the strength of the pattern. Strong bars develop relatively quickly (in a few Gyr, = 10 disc rotation periods) in systems that are disc dominated, gas poor, and have declining rotation curves. Weak bars develop more slowly in systems where the disc is less gravitation- ally important, and are still growing at z = 0. Unbarred galaxies are comparatively gas-rich discs whose rotation speeds do not exceed the maximum circular velocity of the halos they inhabit. Bar lengths compare favourably with observations, ranging from 0.2 to 0.8 times the radius containing 90%...

  14. Sweet! Candy Bar Activity Teaches CAD, Math, and Graphics

    Science.gov (United States)

    Granlund, George

    2009-01-01

    By far, the tastiest technology learning activity that the author's students work on is the development of the design of a chocolate candy bar. This article describes how the author implemented the candy bar activity. The activity gives students an opportunity to design a product and to take it from concept through to production.

  15. Sweet! Candy Bar Activity Teaches CAD, Math, and Graphics

    Science.gov (United States)

    Granlund, George

    2009-01-01

    By far, the tastiest technology learning activity that the author's students work on is the development of the design of a chocolate candy bar. This article describes how the author implemented the candy bar activity. The activity gives students an opportunity to design a product and to take it from concept through to production.

  16. The X-Bar Theory of Phrase Structure.

    Science.gov (United States)

    Kornai, Andras; Pullman, Geoffrey K.

    1990-01-01

    This paper demonstrates that a formalization of the content of X-bar theory reveals very little substance in its claims. Six conditions that encapsulate X-bar theory are discussed: lexicality, succession, uniformity, maximality, centrality, and optionality. (50 references) (JL)

  17. Objectivity in Grading: The Promise of Bar Codes

    Science.gov (United States)

    Jae, Haeran; Cowling, John

    2009-01-01

    This article proposes the use of a new technology to assure student anonymity and reduce bias hazards: identifying students by using bar codes. The limited finding suggests that the use of bar codes for assuring student anonymity could potentially cause students to perceive that grades are assigned more fairly and reassure teachers that they are…

  18. Stellar line-strength index gradients along bars

    NARCIS (Netherlands)

    Perez, Isabel; Sanchez-Blazquez, Patricia; Zurita, Almudena; Knapen, JH; Mahoney, TJ; Vazdekis, A

    2008-01-01

    We present a detailed study of stellar line indices along the bar region for a sample of six early-type galaxies. We find positive gradients within the bar region in the metal indices in four of the six galaxies, and opposite trends in the other two. These latter two galaxies are classified as SAB a

  19. Gas accretion on spiral galaxies bar formation and renewal

    CERN Document Server

    Bournaud, F

    2002-01-01

    The effects of gas accretion on spiral disk dynamics and stability are studied through N-body simulations, including star formation and gas/stars mass exchange. The detailed processes of bar formation, bar destruction and bar re-formation are followed, while in the same time the disk to bulge ratio is varying. The accreted gas might be first prevented to flow inwards to the center by the bar gravity torques, which maintains it to the outer Lindblad resonance. While the first bar is weakening, the accreted gas replenishes the disk, increasing the disk-to-bulge ratio, and the disk self-gravity. A second bar is then unstable, with a higher pattern speed, due both to the increased mass, and shorter bar length. Three or four bar episodes have been followed over a Hubble time. Their strength is decreasing with time, while their pattern speed is increasing. Detailed balance of the angular momentum transfer and evolution can account for these processes. The gas recycled through star formation, and rejected through st...

  20. Wave boundary layer hydrodynamics during onshore bar migration

    NARCIS (Netherlands)

    Henriquez, M.; Reniers, A.; Ruessink, G.; Stive, M.J.F.

    2010-01-01

    To study onshore bar migration and the accompanying intra-wave sediment transport a wave flume experiment was conducted. The wave flume had a rigid bottom with a single bar profile. The focus of the experiment was to measure the hydrodynamics in the wave bottom boundary layer. The results show that

  1. Calculation of error bars for laser damage observations

    Science.gov (United States)

    Arenberg, Jonathan W.

    2008-10-01

    The use of the error bar is a critical means of communicating the quality of individual data points and a processed result. Understanding the error bar for a processed measurement depends on the measurement technique being used and is the subject of many recent works, as such, the paper will confine its scope to the determination of the error bar on a single data point. Many investigators either ignore the error bar altogether or use a "one size error fits all" method, both of these approaches are poor procedure and misleading. It is the goal of this work to lift the veil of mysticism surrounding error bars for damage observations and make their description, calculation and use, easy and commonplace. This paper will rigorously derive the error bar size as a function of the experimental parameters and observed data and will concentrate on the dependent variable, the cumulative probability of damage. The paper will begin with a discussion of the error bar as a measure of data quality or reliability. The expression for the variance in the parameters is derived via standard methods and converted to a standard deviation. The concept of the coverage factor is introduced to scale the error bar to the desired confidence level, completing the derivation

  2. Theoretical approaches to low energy $\\bar{K}N$ interactions

    CERN Document Server

    Cieply, Ales

    2016-01-01

    We provide a direct comparison of modern theoretical approaches based on the SU(3) chiral dynamics and describing the low energy $\\bar{K}N$ data. The model predictions for the $\\bar{K}N$ amplitudes and pole content of the models are discussed.

  3. A bond model for ribbed bars based on concrete confinement

    NARCIS (Netherlands)

    Den Uijl, J.A.; Bigaj, A.J.

    1996-01-01

    A new bond model for ribbed bars embedded in concrete has been developed. The model is based on the confining capacity of the concrete surrounding the bar. This confinement capacity is evaluated with the help of a thick-wailed-cylinder model, with which the relation between the radial displacement

  4. On the microlensing optical depth of the galactic bar

    CERN Document Server

    Mao, S

    1996-01-01

    The microlensing probability (optical depth \\tau) toward the Galactic center carries information about the mass distribution of the Galactic bulge/bar, so can be used to constrain the very uncertain shape parameters of the bar. We find tau depends on the bar mass, radial profile, angle, axis scale lengths and boxyness by a few simple analytical formulae, which shows: (1) \\tau is proportional to the mass of the bar, M. (2) \\tau falls along the minor axis with a strong gradient. (3) An oblate bulge can have more optical depth than a triaxial bar if the bar angle \\alpha>45 degress. (4) \\tau is the largest if the angle \\alpha and the axis ratio y_0/x_0 conspires so that y_0/x_0=\\tan \\alpha. (5) At a fixed field on the minor axis but away from the center, boxy bars with a flat density profile tend to give a larger optical depth than ellipsoidal bars with a steep profile. (6) Main sequence sources should have a significantly lower (20-50\\% lower) optical depth than red clump giants if main sequence stars are not ob...

  5. Predictions for the $\\bar B^0 \\to \\bar K^{*0} X (YZ)$ and $\\bar B^0_s \\to \\phi X (YZ)$ with $X(4160), Y(3940), Z(3930)$

    CERN Document Server

    Liang, Wei-Hong; Oset, E

    2015-01-01

    We investigate the decay of $\\bar B^0 \\to \\bar K^{*0} R$ and $\\bar B^0_s \\to \\phi R$ with $R$ being the $X(4160)$, $Y(3940)$, $Z(3930)$ resonances. Under the assumption that these states are dynamically generated from the vector-vector interaction, as has been concluded from several theoretical studies, we use a reaction mechanism of quark production at the elementary level, followed by hadronization of one final $q \\bar q$ pair into two vectors and posterior final state interaction of this pair of vector mesons to produce the resonances. With this procedure we are able to predict five ratios for these decays, which are closely linked to the dynamical nature of these states, and also predict the order of magnitude of the branching ratios which we find of the order of $10^{-4}$, well within the present measurable range. The measurement of these decays rates can help unravel the nature of these resonances.

  6. Performance with Aspect Ratio of 1.0 and 550MPa Bars

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seokchul; Lee, Byungsoo; Bang, Changjoon; Yim, Sangjoon [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    ACI 349, the matrix of KEPIC SNC code, also limits the yield strength of the bars to 60,000psi (420Mpa). But raising the yield strength of flexural bars to 80,000psi (550MPa) is in progress. For the case of shear bar, however, yield strength of shear and torsion bar are limited to 60,000psi (420MPa) to restrain crack width against diagonal tension. According to recent domestic and foreign studies, high-strength bars are possible to use as shear reinforcement bars. The yield strength of shear bars in Korea and European countries is higher than the yield strength limited by KEPIC and ACI. To use shear bar (horizontal bar) having higher yield strength for the wall used in a nuclear power plant, experiments with Gr.80 bars were performed in this study to evaluate the wall performance and to verify applicability of high-strength bars (Gr.80) as shear bars. To use 550MPa bars for the walls of a nuclear power plant structure, walls made by using 550MPa bars are compared and analyzed with walls made by using 420MPa bars as current code KEPIC SNC (ACI349) 420MPa is limited to. It is revealed that walls using 550MPa grade bar have 67% higher shear strength than walls using bars in accordance with current code. In addition, walls using bars having 550MPa strength show similar behavior to walls using bars having typical strength. However, maximum strength of walls using high strength bars showed 8% reduction in shear strength when compare with maximum strength of walls using bars having typical strength. We found that ductility capability of high-strength bar is not so very different from that of typical strength bar. This study is used as a reference material for the safe application of bars having higher maximum yield strength of shear bar, 550MPa, rather than bars having the maximum yield strength limited by current code, 420MPa.

  7. Data summary for the near-shore sediment characterization task of the Clinch River Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Levine, D.A.; Hargrove, W.W.; Campbell, K.R.; Wood, M.A.; Rash, C.D.

    1994-10-01

    This report presents the results of the Near-Shore Sediment Characterization Task of the Clinch River Environmental Restoration Program (CR-ERP). The goals of the task were to (1) determine the extent to which near-shore surface sediments are contaminated by releases from the Oak Ridge Reservation (ORR) and (2) provide data for the Watts Bar Reservoir Interagency Permitting Group (WBRIPG) to evaluate the human health risks from exposure to sediments during and following dredging operations. The data collected for this task are also to be used in the Remedial Investigation/Feasibility Study (RLTS) for the CR-ERP operable units (Lower Watts Bar and Clinch River) to characterize the human health risk associated with exposure to near-shore sediments throughout the Watts Bar Reservoir.

  8. The ratio of pattern speeds in double-barred galaxies

    CERN Document Server

    Font, Joan; Zaragoza-Cardiel, Javier; Fathi, Kambiz; Epinat, Benoît; Amram, Philippe

    2014-01-01

    We have obtained two-dimensional velocity fields in the ionized gas of a set of 8 double-barred galaxies, at high spatial and spectral resolution, using their H$\\alpha$ emission fields measured with a scanning Fabry-Perot spectrometer. Using the technique by which phase reversals in the non-circular motion indicate a radius of corotation, taking advantage of the high angular and velocity resolution we have obtained the corotation radii and the pattern speeds of both the major bar and the small central bar in each of the galaxies; there are few such measurements in the literature. Our results show that the inner bar rotates more rapidly than the outer bar by a factor between 3.3 and 3.6.

  9. Study of aging and embrittlement of microalloyed steel bars

    Science.gov (United States)

    Campillo, B.; Perez, R.; Martinez, L.

    1996-10-01

    The aging of hooks, anchors, and other bent reinforcing steel bars in concrete structures are considered in modern international standards. Rebend test procedures have been designed in order to predict the aging embrittlement susceptibility by submerging bent reinforcing bar specimens in boiling water. Subsequently the bars are rebent or straightened in order to determine the loss of ductility or embrittlement of the aged material. The present work considers the influence of carbon, sulfur, and niobium on the performance of reinforcing bars in rebend tests of 300 heats of microalloyed steel bars with a variety of compositions. The microstructural evidence and the statistical results clearly indicate the strong influence of carbon and sulfur on rebend failure, while niobium-rich precipitates contribute to the hardening of the ferrite grains during aging.

  10. Spectral narrowing of a 980 nm tapered diode laser bar

    DEFF Research Database (Denmark)

    Vijayakumar, Deepak; Jensen, Ole Bjarlin; Lucas Leclin, Gaëlle

    2011-01-01

    High power diode laser bars are interesting in many applications such as solid state laser pumping, material processing, laser trapping, laser cooling and second harmonic generation. Often, the free running laser bars emit a broad spectrum of the order of several nanometres which limit their scope...... in wavelength specific applications and hence, it is vital to stabilize the emission spectrum of these devices. In our experiment, we describe the wavelength narrowing of a 12 element 980 nm tapered diode laser bar using a simple Littman configuration. The tapered laser bar which suffered from a big smile has...... been "smile corrected" using individual phase masks for each emitter. The external cavity consists of the laser bar, both fast and slow axis micro collimators, smile correcting phase mask, 6.5x beam expanding lens combination, a 1200 lines/mm reflecting grating with 85% efficiency in the first order...

  11. Disc heating: possible link between weak bars and superthin galaxies

    CERN Document Server

    Saha, Kanak

    2014-01-01

    The extreme flatness of stellar discs in superthin galaxies is puzzling and the apparent dearth of these objects in cosmological simulation poses challenging problem to the standard cold dark matter paradigm. Irrespective of mergers or accretion that a galaxy might be going through, stars are heated as they get older while they interact with the spirals and bars which are ubiquitous in disc galaxies -- leading to a puffed up stellar disc. It remains unclear how superthin galaxies maintain their thinness through the cosmic evolution. We follow the internal evolution of a sample of 16 initially extremely thin stellar discs using collisionless N-body simulation. All of these discs eventually form a bar in their central region. Depending on the initial condition, some of these stellar discs readily form strong bars while others grow weak bars over secular evolution time scale. We show that galaxies with strong bars heat the stars very efficiently, eventually making their stellar discs thicker. On the other hand, ...

  12. Nearshore bars and the break-point hypothesis

    Science.gov (United States)

    Sallenger, A.H.; Howd, P.A.

    1989-01-01

    The set of hypotheses calling for bar formation at the break point was tested with field data. During two different experiments, waves were measured across the surf zone coincident with the development of a nearshore bar. We use a criterion, based on the wave height to depth ratio, to determine the offshore limit of the inner surf zone. During the first experiment, the bar became better developed and migrated offshore while remaining well within the inner surf zone. During the second experiment, the surf zone was narrower and we cannot rule out the possibility of break point processes contributing to bar development. We conclude that bars are not necessarily coupled with the break point and can become better developed and migrate offshore while being in the inner surf zone landward from initial wave breaking in the outer surf zone. ?? 1989.

  13. New light on the formation and evolution of bars - Trends in the stellar line-strength indices distribution inside the bar region

    NARCIS (Netherlands)

    Perez, I.; Sanchez-Blazquez, P.; Zurita, A.

    2007-01-01

    Aims. Our aim is to study the stellar content of the bar region to constrain its formation and evolution. Methods. Line-strength indices in the bar region of a sample of 6 barred galaxies were employed to derive age and metallicity gradients along the bars using stellar population models. Results. W

  14. RESUSPENSION OF FINE SEDIMENT IN RESERVOIRS A CASE STUDY OF THE LOWER INN RIVER

    Institute of Scientific and Technical Information of China (English)

    Thomas ELSNER; Sven HARTMANN

    2001-01-01

    The Inn river, major tributary of the Danube river in Germany, has its origin in the higher alpine region of Switzerland and Austria. Mainly for flood management reasons and the extensive production of hydropower based electricity it was fixed with massive embankments and subdivided into a chain of reservoirs. Caused by severe amounts of sediments, mostly fine material as suspended load, a significant sedimentation of the reservoirs takes place. Different strategies are known and investigated to extend the life-cycle of the reservoirs and the efficient use of the turbines. During the past decades parts of the reservoirs turned into ecologically valuable habitats which had to be excluded from e.g. flushing operations and are protected areas nowadays. In the meantime ecologists had to realize that the value of those ecosystems is declining as the result of further aggradation of the depositions leading to a new but static condition. Measures are discussed to stimulate dynamic changes of the sand bars avoiding their stabilization by vegetation like bushes and trees. Basic ideas of the concept and the 2d-model to simulate and optimize engineering solutions are described respecting ecological restrictions.

  15. Sedimentation and sustainability of western American reservoirs

    Science.gov (United States)

    Graf, William L.; Wohl, Ellen; Sinha, Tushar; Sabo, John L.

    2010-12-01

    Reservoirs are sustainable only as long as they offer sufficient water storage space to achieve their design objectives. Life expectancy related to sedimentation is a measure of reservoir sustainability. We used data from the Army Corps of Engineers, U.S. Bureau of Reclamation, and U.S. Geological Survey (Reservoir Sedimentation Survey Information System II (RESIS II)) to explore the sustainability of American reservoirs. Sustainability varied by region, with the longest life expectancies in New England and the Tennessee Valley and the shortest in the interior west. In the Missouri and Colorado River basins, sedimentation and rates of loss of reservoir storage capacity were highly variable in time and space. In the Missouri River Basin, the larger reservoirs had the longest life expectancies, with some exceeding 1000 years, while smaller reservoirs in the basin had the shortest life expectancies. In the Colorado River Basin at the site of Glen Canyon Dam, sediment inflow varied with time, declining by half beginning in 1942 because of hydroclimate and upstream geomorphic changes. Because of these changes, the estimated life expectancy of Lake Powell increased from 300 to 700 years. Future surprise changes in sedimentation delivery and reservoir filling area are expected. Even though large western reservoirs were built within a limited period, their demise will not be synchronous because of varying sedimentation rates. Popular literature has incorrectly emphasized the possibility of rapid, synchronous loss of reservoir storage capacity and underestimated the sustainability of the water control infrastructure.

  16. Seismic Imaging of Reservoir Structure at The Geysers Geothermal Reservoir

    Science.gov (United States)

    Gritto, R.; Yoo, S.; Jarpe, S.

    2013-12-01

    Three-dimensional Vp/Vs-ratio structure is presented for The Geysers geothermal field using seismic travel-time data. The data were recorded by the Lawrence Berkeley National Laboratory (LBNL) using a 34-station seismic network. The results are based on 32,000 events recorded in 2011 and represent the highest resolution seismic imaging campaign at The Geysers to date. The results indicate low Vp/Vs-ratios in the central section of The Geysers within and below the current reservoir. The extent of the Vp/Vs anomaly deceases with increasing depth. Spatial correlation with micro-seismicity, used as a proxy for subsurface water flow, indicates the following. Swarms of seismicity correlate well with areas of high and intermediate Vp/Vs estimates, while regions of low Vp/Vs estimates appear almost aseismic. This result supports past observations that high and low Vp/Vs-ratios are related to water and gas saturated zones, respectively. In addition, the correlation of seismicity to intermediate Vp/Vs-ratios is supportive of the fact that the process of water flashing to steam requires four times more energy than the initial heating of the injected water to the flashing point. Because this energy is dawn from the reservoir rock, the associated cooling of the rock generates more contraction and thus seismic events than water being heated towards the flashing point. The consequences are the presence of some events in regions saturated with water, most events in regions of water flashing to steam (low steam saturation) and the absence of seismicity in regions of high steam concentrations where the water has already been converted to steam. Furthermore, it is observed that Vp/Vs is inversely correlated to Vs but uncorrelated to Vp, leading support to laboratory measurements on rock samples from The Geysers that observe an increase in shear modulus while the core samples are dried out. As a consequence, traditional poroelastic theory is no applicable at The Geysers geothermal

  17. Longitudinal gradients along a reservoir cascade

    Science.gov (United States)

    Miranda, L.E.; Habrat, M.D.; Miyazono, S.

    2008-01-01

    Reservoirs have traditionally been regarded as spatially independent entities rather than as longitudinal segments of a river system that are connected upstream and downstream to the river and other reservoirs. This view has frustrated advancement in reservoir science by impeding adequate organization of available information and by hindering interchanges with allied disciplines that often consider impounded rivers at the basin scale. We analyzed reservoir morphology, water quality, and fish assemblage data collected in 24 reservoirs of the Tennessee River; we wanted to describe longitudinal changes occurring at the scale of the entire reservoir series (i.e., cascade) and to test the hypothesis that fish communities and environmental factors display predictable gradients like those recognized for unimpounded rivers. We used a data set collected over a 7-year period; over 3 million fish representing 94 species were included in the data set. Characteristics such as reservoir mean depth, relative size of the limnetic zone, water retention time, oxygen stratification, thermal stratification, substrate size, and water level fluctuations increased in upstream reservoirs. Conversely, reservoir area, extent of riverine and littoral zones, access to floodplains and associated wetlands, habitat diversity, and nutrient and sediment inputs increased in downstream reservoirs. Upstream reservoirs included few, largely lacustrine, ubiquitous fish taxa that were characteristic of the lentic upper reaches of the basin. Fish species richness increased in a downstream direction from 12 to 67 species/ reservoir as riverine species became more common. Considering impoundments at a basin scale by viewing them as sections in a river or links in a chain may generate insight that is not always available when the impoundments are viewed as isolated entities. Basin-scale variables are rarely controllable but constrain the expression of processes at smaller scales and can facilitate the

  18. A mathematical high bar-human body model for analysing and interpreting mechanical-energetic processes on the high bar.

    Science.gov (United States)

    Arampatzis, A; Brüggemann, G P

    1998-12-01

    The aims of this study were: 1. To study the transfer of energy between the high bar and the gymnast. 2. To develop criteria from the utilisation of high bar elasticity and the utilisation of muscle capacity to assess the effectiveness of a movement solution. 3. To study the influence of varying segment movement upon release parameters. For these purposes a model of the human body attached to the high bar (high bar-human body model) was developed. The human body was modelled using a 15-segment body system. The joint-beam element method (superelement) was employed for modelling the high bar. A superelement consists of four rigid segments connected by joints (two Cardan joints and one rotational-translational joint) and springs (seven rotation springs and one tension-compression spring). The high bar was modelled using three superelements. The input data required for the high bar human body model were collected with video-kinematographic (50 Hz) and dynamometric (500 Hz) techniques. Masses and moments of inertia of the 15 segments were calculated using the data from the Zatsiorsky et al. (1984) model. There are two major phases characteristic of the giant swing prior to dismounts from the high bar. In the first phase the gymnast attempts to supply energy to the high bar-humanbody system through muscle activity and to store this energy in the high bar. The difference between the energy transferred to the high bar and the reduction in the total energy of the body could be adopted as a criterion for the utilisation of high bar elasticity. The energy previously transferred into the high bar is returned to the body during the second phase. An advantageous increase in total body energy at the end of the exercise could only be obtained through muscle energy supply. An index characterising the utilisation of muscle capacity was developed out of the difference between the increase in total body energy and the energy returned from the high bar. A delayed and initially slow but

  19. Role of $Y(4630)$ in the $p\\bar{p}\\rightarrow\\Lambda_c\\bar{\\Lambda}_c$ reaction near threshold

    CERN Document Server

    Wang, Yan-Yan; Wang, En; li, De-Min

    2016-01-01

    We investigate the charmed baryon production reaction $p\\bar{p}\\rightarrow\\Lambda_c\\bar{\\Lambda}_c$ in an effective Lagrangian approach. Besides the $t$-channel $D^0$ and $D^{*0}$ mesons exchanges, the $s$-channel $Y(4630)$ meson exchange is taken into account. For the total cross sections, the $D^0$ and $D^{*0}$ mesons provide minor background contributions, while the $Y(4630)$ state gives a clear peak structure with the magnitude of 10 $\\mu$b at center of mass energy 4.63 GeV. Basing on the results, we suggest that the reaction of $p\\bar{p}\\rightarrow\\Lambda_c\\bar{\\Lambda}_c$ can be used to search for the $1^{--}$ charmonium-like $Y(4630)$ state, and our predictions can be tested in future by the $\\rm{\\bar PANDA}$ facility.

  20. Variation of Galactic Bar Length with Amplitude and Density as Evidence for Bar Growth over a Hubble Time

    CERN Document Server

    Elmegreen, Bruce G; Knapen, Johan H; Buta, Ronald J; Block, David L; Puerari, Ivanio

    2007-01-01

    K_s-band images of 20 barred galaxies show an increase in the peak amplitude of the normalized m=2 Fourier component with the R_25-normalized radius at this peak. This implies that longer bars have higher $m=2$ amplitudes. The long bars also correlate with an increased density in the central parts of the disks, as measured by the luminosity inside 0.25R_25 divided by the cube of this radius in kpc. Because denser galaxies evolve faster, these correlations suggest that bars grow in length and amplitude over a Hubble time with the fastest evolution occurring in the densest galaxies. All but three of the sample have early-type flat bars; there is no clear correlation between the correlated quantities and the Hubble type.