Soft Asphalt and Double Otta Seal—Self-Healing Sustainable Techniques for Low-Volume Gravel Road Rehabilitation

Directory of Open Access Journals (Sweden)

Audrius Vaitkus

2018-01-01

Full Text Available Increased traffic flow on low-volume gravel roads and deficiencies of national road infrastructure, are increasingly apparent in Lithuania. Gravel roads do not comply with requirements, resulting in low driving comfort, longer travelling time, faster vehicle amortization, and dustiness. The control of dustiness is one of the most important road maintenance activities on gravel roads. Another important issue is the assurance of required driving comfort and safety. Soft asphalt and Otta Seal technologies were proposed as a sustainable solution for the improvement of low-volume roads in Lithuania. Five gravel roads were constructed with soft asphalt, and 13 gravel roads were sealed with double Otta Seal, in 2012. The main aim of this research was to check soft asphalt and double Otta Seal’s ability to self-heal, on the basis of the results of the qualitative visual assessment of pavement defects and distress. The qualitative visual assessment was carried out twice a year following the opening of the rehabilitated road sections. The results confirmed soft asphalt and double Otta Seal’s ability to self-heal. The healing effect was more than 13% and 19% on roads with soft asphalt and double Otta Seal, respectively. In addition, on some roads, all cracks observed in spring self-healed during summer.

Customized rating assessment of climate suitability (CRACS): climate satisfaction evaluation based on subjective perception

Science.gov (United States)

Lin, Tzu-Ping; Yang, Shing-Ru; Matzarakis, Andreas

2015-12-01

Climate not only influences the behavior of people in urban environments but also affects people's schedules and travel plans. Therefore, providing people with appropriate long-term climate evaluation information is crucial. Therefore, we developed an innovative climate assessment system based on field investigations conducted in three cities located in Northern, Central, and Southern Taiwan. The field investigations included the questionnaire surveys and climate data collection. We first analyzed the relationship between the participants and climate parameters comprising physiologically equivalent temperature, air temperature, humidity, wind speed, solar radiation, cloud cover, and precipitation. Second, we established the neutral value, comfort range, and dissatisfied range of each parameter. Third, after verifying that the subjects' perception toward the climate parameters vary based on individual preferences, we developed the customized rating assessment of climate suitability (CRACS) approach, which featured functions such as personalized and default climate suitability information to be used by users exhibiting varying demands. Finally, we performed calculations using the climate conditions of two cities during the past 10 years to demonstrate the performance of the CRACS approach. The results can be used as a reference when planning activities in the city or when organizing future travel plans. The flexibility of the assessment system enables it to be adjusted for varying regions and usage characteristics.

No evidence of a threshold in traffic volume affecting road-kill mortality at a large spatio-temporal scale

Energy Technology Data Exchange (ETDEWEB)

Grilo, Clara, E-mail: clarabentesgrilo@gmail.com [Departamento de Biología de la Conservación, Estación Biológica de Doñana (EBD-CSIC), Calle Américo Vespucio s/n, E-41092 Sevilla (Spain); Centro Brasileiro de Estudos em Ecologia de Estradas, Departamento de Biologia, Universidade Federal de Lavras, Campus Universitário, 37200-000 Lavras, Minas Gerais (Brazil); Ferreira, Flavio Zanchetta; Revilla, Eloy [Departamento de Biología de la Conservación, Estación Biológica de Doñana (EBD-CSIC), Calle Américo Vespucio s/n, E-41092 Sevilla (Spain)

2015-11-15

Previous studies have found that the relationship between wildlife road mortality and traffic volume follows a threshold effect on low traffic volume roads. We aimed at evaluating the response of several species to increasing traffic intensity on highways over a large geographic area and temporal period. We used data of four terrestrial vertebrate species with different biological and ecological features known by their high road-kill rates: the barn owl (Tyto alba), hedgehog (Erinaceus europaeus), red fox (Vulpes vulpes) and European rabbit (Oryctolagus cuniculus). Additionally, we checked whether road-kill likelihood varies when traffic patterns depart from the average. We used annual average daily traffic (AADT) and road-kill records observed along 1000 km of highways in Portugal over seven consecutive years (2003–2009). We fitted candidate models using Generalized Linear Models with a binomial distribution through a sample unit of 1 km segments to describe the effect of traffic on the probability of finding at least one victim in each segment during the study. We also assigned for each road-kill record the traffic of that day and the AADT on that year to test for differences using Paired Student's t-test. Mortality risk declined significantly with traffic volume but varied among species: the probability of finding road-killed red foxes and rabbits occurs up to moderate traffic volumes (< 20,000 AADT) whereas barn owls and hedgehogs occurred up to higher traffic volumes (40,000 AADT). Perception of risk may explain differences in responses towards high traffic highway segments. Road-kill rates did not vary significantly when traffic intensity departed from the average. In summary, we did not find evidence of traffic thresholds for the analysed species and traffic intensities. We suggest mitigation measures to reduce mortality be applied in particular on low traffic roads (< 5000 AADT) while additional measures to reduce barrier effects should take into

No evidence of a threshold in traffic volume affecting road-kill mortality at a large spatio-temporal scale

International Nuclear Information System (INIS)

Grilo, Clara; Ferreira, Flavio Zanchetta; Revilla, Eloy

2015-01-01

Previous studies have found that the relationship between wildlife road mortality and traffic volume follows a threshold effect on low traffic volume roads. We aimed at evaluating the response of several species to increasing traffic intensity on highways over a large geographic area and temporal period. We used data of four terrestrial vertebrate species with different biological and ecological features known by their high road-kill rates: the barn owl (Tyto alba), hedgehog (Erinaceus europaeus), red fox (Vulpes vulpes) and European rabbit (Oryctolagus cuniculus). Additionally, we checked whether road-kill likelihood varies when traffic patterns depart from the average. We used annual average daily traffic (AADT) and road-kill records observed along 1000 km of highways in Portugal over seven consecutive years (2003–2009). We fitted candidate models using Generalized Linear Models with a binomial distribution through a sample unit of 1 km segments to describe the effect of traffic on the probability of finding at least one victim in each segment during the study. We also assigned for each road-kill record the traffic of that day and the AADT on that year to test for differences using Paired Student's t-test. Mortality risk declined significantly with traffic volume but varied among species: the probability of finding road-killed red foxes and rabbits occurs up to moderate traffic volumes (< 20,000 AADT) whereas barn owls and hedgehogs occurred up to higher traffic volumes (40,000 AADT). Perception of risk may explain differences in responses towards high traffic highway segments. Road-kill rates did not vary significantly when traffic intensity departed from the average. In summary, we did not find evidence of traffic thresholds for the analysed species and traffic intensities. We suggest mitigation measures to reduce mortality be applied in particular on low traffic roads (< 5000 AADT) while additional measures to reduce barrier effects should take into

Gravel roads management : volume 1, gravel roads management.

Science.gov (United States)

2010-10-01

This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

Mutations of the central tyrosines of putative cholesterol recognition amino acid consensus (CRAC) sequences modify folding, activity, and sterol-sensing of the human ABCG2 multidrug transporter.

Science.gov (United States)

Gál, Zita; Hegedüs, Csilla; Szakács, Gergely; Váradi, András; Sarkadi, Balázs; Özvegy-Laczka, Csilla

2015-02-01

Human ABCG2 is a plasma membrane glycoprotein causing multidrug resistance in cancer. Membrane cholesterol and bile acids are efficient regulators of ABCG2 function, while the molecular nature of the sterol-sensing sites has not been elucidated. The cholesterol recognition amino acid consensus (CRAC, L/V-(X)(1-5)-Y-(X)(1-5)-R/K) sequence is one of the conserved motifs involved in cholesterol binding in several proteins. We have identified five potential CRAC motifs in the transmembrane domain of the human ABCG2 protein. In order to define their roles in sterol-sensing, the central tyrosines of these CRACs (Y413, 459, 469, 570 and 645) were mutated to S or F and the mutants were expressed both in insect and mammalian cells. We found that mutation in Y459 prevented protein expression; the Y469S and Y645S mutants lost their activity; while the Y570S, Y469F, and Y645F mutants retained function as well as cholesterol and bile acid sensitivity. We found that in the case of the Y413S mutant, drug transport was efficient, while modulation of the ATPase activity by cholesterol and bile acids was significantly altered. We suggest that the Y413 residue within a putative CRAC motif has a role in sterol-sensing and the ATPase/drug transport coupling in the ABCG2 multidrug transporter. Copyright © 2014. Published by Elsevier B.V.

BEST PRACTICES TO SUPPORT AND IMPROVE PAVEMENT MANAGEMENT SYSTEMS FOR LOW-VOLUME PAVED ROADS – PHASE I

Science.gov (United States)

2018-02-02

The Colorado Department of Transportation (CDOT) has been trying to identify the most effective methods for managing low-volume roads (LVRs). These roads are facing multiple challenges including: reductions in maintenance budgets, impact of industria...

An estimation of vehicle kilometer traveled and on-road emissions using the traffic volume and travel speed on road links in Incheon City.

Science.gov (United States)

Jung, Sungwoon; Kim, Jounghwa; Kim, Jeongsoo; Hong, Dahee; Park, Dongjoo

2017-04-01

The objective of this study is to estimate the vehicle kilometer traveled (VKT) and on-road emissions using the traffic volume in urban. We estimated two VKT; one is based on registered vehicles and the other is based on traffic volumes. VKT for registered vehicles was 2.11 times greater than that of the applied traffic volumes because each VKT estimation method is different. Therefore, we had to define the inner VKT is moved VKT inner in urban to compare two values. Also, we focused on freight modes because these are discharged much air pollutant emissions. From analysis results, we found middle and large trucks registered in other regions traveled to target city in order to carry freight, target city has included many industrial and logistics areas. Freight is transferred through the harbors, large logistics centers, or via locations before being moved to the final destination. During this process, most freight is moved by middle and large trucks, and trailers rather than small trucks for freight import and export. Therefore, these trucks from other areas are inflow more than registered vehicles. Most emissions from diesel trucks had been overestimated in comparison to VKT from applied traffic volumes in target city. From these findings, VKT is essential based on traffic volume and travel speed on road links in order to estimate accurately the emissions of diesel trucks in target city. Our findings support the estimation of the effect of on-road emissions on urban air quality in Korea. Copyright © 2016. Published by Elsevier B.V.

The CRAC cohort model: A computerized low cost registry of interventional cardiology with daily update and long-term follow-up.

Science.gov (United States)

Rangé, G; Chassaing, S; Marcollet, P; Saint-Étienne, C; Dequenne, P; Goralski, M; Bardiére, P; Beverilli, F; Godillon, L; Sabine, B; Laure, C; Gautier, S; Hakim, R; Albert, F; Angoulvant, D; Grammatico-Guillon, L

2018-05-01

To assess the reliability and low cost of a computerized interventional cardiology (IC) registry to prospectively and systematically collect high-quality data for all consecutive coronary patients referred for coronary angiogram or/and coronary angioplasty. Rigorous clinical practice assessment is a key factor to improve prognosis in IC. A prospective and permanent registry could achieve this goal but, presumably, at high cost and low level of data quality. One multicentric IC registry (CRAC registry), fully integrated to usual coronary activity report software, started in the centre Val-de-Loire (CVL) French region in 2014. Quality assessment of CRAC registry was conducted on five IC CathLab of the CVL region, from January 1st to December 31st 2014. Quality of collected data was evaluated by measuring procedure exhaustivity (comparing with data from hospital information system), data completeness (quality controls) and data consistency (by checking complete medical charts as gold standard). Cost per procedure (global registry operating cost/number of collected procedures) was also estimated. CRAC model provided a high-quality level with 98.2% procedure completeness, 99.6% data completeness and 89% data consistency. The operating cost per procedure was €14.70 ($16.51) for data collection and quality control, including ST-segment elevation myocardial infarction (STEMI) preadmission information and one-year follow-up after angioplasty. This integrated computerized IC registry led to the construction of an exhaustive, reliable and costless database, including all coronary patients entering in participating IC centers in the CVL region. This solution will be developed in other French regions, setting up a national IC database for coronary patients in 2020: France PCI. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Road traffic injury on rural roads in Tanzania: measuring the effectiveness of a road safety program.

Science.gov (United States)

Zimmerman, Karen; Jinadasa, Deepani; Maegga, Bertha; Guerrero, Alejandro

2015-01-01

Road traffic injuries (RTIs) are a major public health burden, especially in low- and middle-income countries. There is limited data on RTIs in low-volume, rural African settings. This study attempted to survey all individuals living in households within 200 m of two low-volume rural roads in Tanzania and to collect data on RTIs. Local communities and users of the Bago to Talawanda road (intervention site) and Kikaro to Mihuga road (control site) were targeted and received an intensive program of road safety measures tailored using the crash characteristics of the baseline sample. Demographic data on all household members were collected, and those individuals who suffered an RTI in the previous 3 months had comprehensive information collected about the crash characteristics and the socioeconomic impact. The follow-up data collection occurred nine months after the baseline data were collected. The majority of crashes that caused an RTI involved a motorcycle (71%) and the majority of victims were male (82%) with an average age of 27. Injuries to the legs (55%) were most common and the average length of time away from normal activity was 27 (±33) days. RTI incidence at the intervention site increased during the course of the study (incidence before vs. incidence after) and was unchanged in the community control (incidence before vs. incidence after). The incidence of RTIs in the low-volume rural setting is unacceptably high and most commonly associated with motorcycles. The change in incidence is unreliable due to logistic restraints of the project and more research is needed to quantify the impact of various RTI prevention strategies in this setting. This study provides insight into road traffic injuries on low-volume rural roads, areas where very little research has been captured. Additionally, it provides a replicable study design for those interested in collecting similar data on low-volume rural roads.

Field performance of stress-laminated timber bridges on low-volume roads

Science.gov (United States)

M. A. Ritter; J. P. Wacker; S. R. Duwadi

1995-01-01

Stress-laminated timber bridges were first introduced in the United States in the late 1980s. Since that time, the concept of stress-laminating has received a great deal of attention and hundreds of bridges have been built. Most of these bridges are located on rural low-volume roads. To evaluate the performance of stress-laminated bridges, the United States Department...

Molecular mechanisms of protein-cholesterol interactions in plasma membranes: Functional distinction between topological (tilted) and consensus (CARC/CRAC) domains.

Science.gov (United States)

Fantini, Jacques; Di Scala, Coralie; Baier, Carlos J; Barrantes, Francisco J

2016-09-01

The molecular mechanisms that control the multiple possible modes of protein association with membrane cholesterol are remarkably convergent. These mechanisms, which include hydrogen bonding, CH-π stacking and dispersion forces, are used by a wide variety of extracellular proteins (e.g. microbial or amyloid) and membrane receptors. Virus fusion peptides penetrate the membrane of host cells with a tilted orientation that is compatible with a transient interaction with cholesterol; this tilted orientation is also characteristic of the process of insertion of amyloid proteins that subsequently form oligomeric pores in the plasma membrane of brain cells. Membrane receptors that are associated with cholesterol generally display linear consensus binding motifs (CARC and CRAC) characterized by a triad of basic (Lys/Arg), aromatic (Tyr/phe) and aliphatic (Leu/Val) amino acid residues. In some cases, the presence of both CARC and CRAC within the same membrane-spanning domain allows the simultaneous binding of two cholesterol molecules, one in each membrane leaflet. In this review the molecular basis and the functional significance of the different modes of protein-cholesterol interactions in plasma membranes are discussed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Gravel roads management : volume 2, gravel roads management : implementation guide.

Science.gov (United States)

2011-10-01

This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

Gravel roads management : volume 3, gravel roads management : programming guide.

Science.gov (United States)

2010-10-01

This report establishes procedures for managing dirt and gravel roads, with a primary focus on smaller agencies, such as Wyoming counties, that must manage their roads with very limited resources. The report strives, first, to guide and assist smalle...

Review of the CRAC and SILENE Criticality Accident Studies

International Nuclear Information System (INIS)

Barbry, F.; Fouillaud, P.; Grivot, P.; Reverdy, L.

2009-01-01

In 1967, the Commissariat et l'Energie Atomique (French Atomic Energy Agency) performed its first research on criticality accidents for the purpose of limiting their impact on people, the environment, and nuclear facilities themselves. A criticality accident is accompanied by intense neutron and gamma emissions and release of radioactive fission products-gases and aerosols-gene rating risk of irradiation and contamination. This work has supplemented earlier work in criticality safety, which concentrated on critical mass measurements and computations. Understanding of the consequences of criticality accidents was limited. Emergency planning was hampered by lack of data. Information became available from pulsed reactor experiments, but the experiments were restricted to the established reactor configurations. The objectives of research performed at the Valduc criticality laboratory, mainly on aqueous fissile media, using the CRAC and SILENE facilities, by multidisciplinary teams of physicists, dosimetry specialists, and radio-biologists, were to model criticality accident physics, estimate irradiation risks and radioactive releases, detect excursions, and organize emergency response. The results of the Valduc experiments have contributed toward improved understanding of criticality accident phenomenology and better evaluation of the risks associated with such accidents. (authors)

Review of the CRAC and SILENE Criticality Accident Studies

Energy Technology Data Exchange (ETDEWEB)

Barbry, F.; Fouillaud, P.; Grivot, P.; Reverdy, L. [CEA Valduc, Serv Rech Neutron and Critcite, 21 - Is-sur-Tille (France)

2009-02-15

In 1967, the Commissariat et l'Energie Atomique (French Atomic Energy Agency) performed its first research on criticality accidents for the purpose of limiting their impact on people, the environment, and nuclear facilities themselves. A criticality accident is accompanied by intense neutron and gamma emissions and release of radioactive fission products-gases and aerosols-gene rating risk of irradiation and contamination. This work has supplemented earlier work in criticality safety, which concentrated on critical mass measurements and computations. Understanding of the consequences of criticality accidents was limited. Emergency planning was hampered by lack of data. Information became available from pulsed reactor experiments, but the experiments were restricted to the established reactor configurations. The objectives of research performed at the Valduc criticality laboratory, mainly on aqueous fissile media, using the CRAC and SILENE facilities, by multidisciplinary teams of physicists, dosimetry specialists, and radio-biologists, were to model criticality accident physics, estimate irradiation risks and radioactive releases, detect excursions, and organize emergency response. The results of the Valduc experiments have contributed toward improved understanding of criticality accident phenomenology and better evaluation of the risks associated with such accidents. (authors)

Anticorpos contra vírus de galinha em cracídeos Detection of antibodies against commercial poultry viruses in cracids

Directory of Open Access Journals (Sweden)

Helton Fernandes dos Santos

2009-10-01

Full Text Available Os cracídeos são Galliformes silvestres das Américas. Com o objetivo de investigar a presença de anticorpos contra vírus de galinhas em cracídeos, foram coletadas 51 amostras de soro de 10 diferentes espécies dessas aves. Esses animais eram mantidos em criatórios conservacionistas e zoológicos nos Municípios de Santa Maria, Soledade, Passo Fundo, Sapucaia, Gravataí, Viamão e Três Coroas, Estado do Rio Grande do Sul, Brasil. Anticorpos neutralizantes foram detectados em 5,9% (3/51 do total de amostras testadas contra o vírus da bronquite infecciosa das galinhas, 15,7% (8/51 contra o reovírus aviário e 35,3% (18/51 contra o vírus da doença infecciosa da bolsa. Todas as amostras foram negativas para o vírus da bouba aviária no teste de IDGA. A detecção de anticorpos para vírus de aves comerciais sugere que os cracídeos podem ser susceptíveis à infecção por esses vírus.The cracids are wild Galliformes native from the Americas. Fifty one serum samples were collected from individuals of 10 different species of cracids in order to obtain information regarding to the antibody status of different viruses. These birds were kept in shelters and zoos localized in Santa Maria, Soledade, Passo Fundo, Sapucaia, Gravataí, Viamão and Três Coroas counties, in the Rio Grande do Sul State, Brazil. Neutralizing antibodies were detected in the individuals serum from different species specific referring to infectious bronchitis virus in 5.9% (3/51 of the samples, to avian reovirus in 15.7% (8/51 and, to infectious bursal disease virus in 35.3% (18/51. All samples were negative for fowlpox virus, as measured by IDGA test. The detection of commercial poultry viruses antibodies suggests that cracids could be susceptible to infection by those viruses.

Criticality accidents in solution (CRAC and SILENE programmes) and complementary studies of accidents; radiation dosimetry in human organism during the CRAC programme

International Nuclear Information System (INIS)

Barbry, M.; Dousset, M.

C.R.A.C. (CRiticality occurring ACcidentally) programme is intended to study experimentally the development of a criticality accident as it could occur when handling solutions of fissile material as well as the radiological consequences of such an accident. The fissile matter solutions have been chosen (a) for practical considerations of use and (b) because the probability of an accident occurring seems greater with this type of environment, as the known accidents have shown. The programme is twofold: study of accident physics: form of the evolution (peak, plateau, oscillations, boil up of solutions) the most probable maximum power, minimal power, flux and radiation spectra emitted, freed energy, associated effects, radiolysis, constraints, etc., study of radiological consequences: area dosimetry, individual dosimetry, radiobiological studies, etc. Additional criticality Accident experiments have been and continue to be made on the SILENE reactor in the following principal domains: determination of the emission rate of gaseous fission products and aerosols, area dosimetry and health dosimetry in the presence of shields around the core to vary the neutron and gamma components of the radiation field. Improvement in the knowledge of certain particular aspects of the power excursion, radiolysis gas and pressure wave, experiments of the ''boiling'' type [fr

Glu¹⁰⁶ in the Orai1 pore contributes to fast Ca²⁺-dependent inactivation and pH dependence of Ca²⁺ release-activated Ca²⁺ (CRAC) current.

Science.gov (United States)

Scrimgeour, Nathan R; Wilson, David P; Rychkov, Grigori Y

2012-01-15

FCDI (fast Ca²⁺-dependent inactivation) is a mechanism that limits Ca²⁺ entry through Ca²⁺ channels, including CRAC (Ca²⁺ release-activated Ca²⁺) channels. This phenomenon occurs when the Ca²⁺ concentration rises beyond a certain level in the vicinity of the intracellular mouth of the channel pore. In CRAC channels, several regions of the pore-forming protein Orai1, and STIM1 (stromal interaction molecule 1), the sarcoplasmic/endoplasmic reticulum Ca²⁺ sensor that communicates the Ca²⁺ load of the intracellular stores to Orai1, have been shown to regulate fast Ca²⁺-dependent inactivation. Although significant advances in unravelling the mechanisms of CRAC channel gating have occurred, the mechanisms regulating fast Ca²⁺-dependent inactivation in this channel are not well understood. We have identified that a pore mutation, E106D Orai1, changes the kinetics and voltage dependence of the ICRAC (CRAC current), and the selectivity of the Ca²⁺-binding site that regulates fast Ca²⁺-dependent inactivation, whereas the V102I and E190Q mutants when expressed at appropriate ratios with STIM1 have fast Ca²⁺-dependent inactivation similar to that of WT (wild-type) Orai1. Unexpectedly, the E106D mutation also changes the pH dependence of ICRAC. Unlike WT ICRAC, E106D-mediated current is not inhibited at low pH, but instead the block of Na⁺ permeation through the E106D Orai1 pore by Ca²⁺ is diminished. These results suggest that Glu¹⁰⁶ inside the CRAC channel pore is involved in co-ordinating the Ca²⁺-binding site that mediates fast Ca²⁺-dependent inactivation.

Association between mobile phone traffic volume and road crash fatalities: A population-based case-crossover study.

Science.gov (United States)

Gariazzo, Claudio; Stafoggia, Massimo; Bruzzone, Silvia; Pelliccioni, Armando; Forastiere, Francesco

2018-06-01

Use of mobile phones while driving is known to cause crashes with possible fatalities. Different habits of mobile phone use might be distracting forces and display differential impacts on accident risk; the assessment of the relative importance is relevant to implement prevention, mitigation, and control measures. This study aimed to assess the relationship between the use of mobile phones at population level and road crash fatalities in large urban areas. Data on road crashes with fatalities were collected from seven Italian metropolitan areas and matched in time and space with high resolution mobile phone traffic volume data about calls, texts, Internet connections and upload/download data. A case-crossover study design was applied to estimate the relative risks of road accident for increases in each type of mobile phone traffic volumes in underlying population present in the small areas where accidents occurred. Effect modification was evaluated by weekday/weekend, hour of the day, meteorological conditions, and street densities. Positive associations between road crashes rates and the number of calls, texts, and Internet connections were found, with incremental risks of 17.2% (95% Confidence Interval [CI] 7.7, 27.6), 8.4% (CI 0.7, 16.8), and 54.6% (CI 34.0, 78.5) per increases (at 15 min intervals) of 5 calls/100 people, 3 text/100 people, and 40 connections/100 people, respectively. Small differences across cities were detected. Working days, nighttime and morning hours were associated with greater phone use and more road accidents. The relationship between mobile phone use and road fatalities at population level is strong. Strict controls on cellular phone in the vehicle may results in a large health benefit. Copyright © 2018 Elsevier Ltd. All rights reserved.

Econometric models of road use, accidents, and road investment decisions. Volume 1 : introductory overview, the barely revealed preference behind road investment priorities (essay 1), measuring the contribution of randomness, exposure, weather, and daylig

Science.gov (United States)

1999-11-01

This volume contains the forst part of the author's PhD dissertation, and includes an introductory overview as well as two essays. The first essay entitled "The barely revealed preference behind road investment priorities," co-authored by Rune Elvik,...

Vehicle-based road dust emission measurement (III):. effect of speed, traffic volume, location, and season on PM 10 road dust emissions in the Treasure Valley, ID

Science.gov (United States)

Etyemezian, V.; Kuhns, H.; Gillies, J.; Chow, J.; Hendrickson, K.; McGown, M.; Pitchford, M.

The testing re-entrained aerosol kinetic emissions from roads (TRAKER) road dust measurement system was used to survey more than 400 km of paved roads in southwestern Idaho during 3-week sampling campaigns in winter and summer, 2001. Each data point, consisting of a 1-s measurement of particle light scattering sampled behind the front tire, was associated with a link (section of road) in the traffic demand model network for the Treasure Valley, ID. Each link was in turn associated with a number of characteristics including posted speed limit, vehicle kilometers traveled (vkt), road class (local/residential, collector, arterial, and interstate), county, and land use (urban vs. rural). Overall, the TRAKER-based emission factors based on location, setting, season, and speed spanned a narrow range from 3.6 to 8.0 g/vkt. Emission factors were higher in winter compared to summer, higher in urban areas compared to rural, and lower for roads with fast travel speeds compared to slower roads. The inherent covariance between traffic volume and traffic speed obscured the assessment of the effect of traffic volume on emission potentials. Distance-based emission factors expressed in grams per kilometer traveled (g/vkt) for roads with low travel speeds (˜11 m/s residential roads) compared to those with high travel speeds (˜25 m/s interstates) were higher (5.2 vs. 3.0 g/vkt in summer and 5.9 vs. 4.9 g/vkt in winter). However, emission potentials which characterize the amount of suspendable material on a road were substantially higher on roads with low travel speeds (0.71 vs. 0.13 g/vkt/(m/s) in summer and 0.78 vs. 0.21 g/vkt/(m/s) in winter). This suggested that while high speed roads are much cleaner (factor of 5.4 in summer), on a vehicle kilometer traveled basis, emissions from high and low speed roads are of the same order. Emission inventories based on the TRAKER method, silt loadings obtained during the field study, and US EPA's AP-42 default values of silt loading were

Recommendations on the use of marginal base course materials in low volume roads in South Africa

CSIR Research Space (South Africa)

Paige-Green, P

2009-06-04

Full Text Available have required intermittent maintenance during their lives, they have clearly shown that current materials standards may be too conservative for affordable low volume roads. The study has shown that good drainage and construction quality are the primary...

Reconstruction of road defects and road roughness classification using vehicle responses with artificial neural networks simulation

CSIR Research Space (South Africa)

Ngwangwa, HM

2010-04-01

Full Text Available -1 Journal of Terramechanics Volume 47, Issue 2, April 2010, Pages 97-111 Reconstruction of road defects and road roughness classification using vehicle responses with artificial neural networks simulation H.M. Ngwangwaa, P.S. Heynsa, , , F...

Road Accidents and Road Fatalities in Denmark from 1968 to 2004

DEFF Research Database (Denmark)

Orozova-Bekkevold, Ivanka; Hels, Tove; Bernhoft, Inger Marie

2008-01-01

The purpose of this article is to describe the road accidents and road fatalities in Denmark in the period 1968-2004. Only accidents registered by the police were used. Crude and gender & age specific fatality rates (counts per 1,000,000 inhabitants) were estimated for all road users...... and for bicyclists. The accident and fatality rates have decreased by around 70% from 1968 to 2004, while the motorisation rate has increased by approximately 90%. The sharpest decrease in the fatality rate was observed among the youngest (below 18 years old) and the older (above 64) road users. Gender related...... and actions targeted to improve road safety have indeed led to a significant reduction in injury accidents and fatalities. Further research and more detailed data, especially on traffic volume and individual exposure are necessary in order to investigate properly a causal relation between the number...

Demonstration uncertainty/sensitivity analysis using the health and economic consequence model CRAC2

International Nuclear Information System (INIS)

Alpert, D.J.; Iman, R.L.; Johnson, J.D.; Helton, J.C.

1985-01-01

This paper summarizes a demonstration uncertainty/sensitivity analysis performed on the reactor accident consequence model CRAC2. The study was performed with uncertainty/sensitivity analysis techniques compiled as part of the MELCOR program. The principal objectives of the study were: 1) to demonstrate the use of the uncertainty/sensitivity analysis techniques on a health and economic consequence model, 2) to test the computer models which implement the techniques, 3) to identify possible difficulties in performing such an analysis, and 4) to explore alternative means of analyzing, displaying, and describing the results. Demonstration of the applicability of the techniques was the motivation for performing this study; thus, the results should not be taken as a definitive uncertainty analysis of health and economic consequences. Nevertheless, significant insights on health and economic consequence analysis can be drawn from the results of this type of study. Latin hypercube sampling (LHS), a modified Monte Carlo technique, was used in this study. LHS generates a multivariate input structure in which all the variables of interest are varied simultaneously and desired correlations between variables are preserved. LHS has been shown to produce estimates of output distribution functions that are comparable with results of larger random samples

How long do the dead survive on the road? Carcass persistence probability and implications for road-kill monitoring surveys.

Directory of Open Access Journals (Sweden)

Sara M Santos

Full Text Available BACKGROUND: Road mortality is probably the best-known and visible impact of roads upon wildlife. Although several factors influence road-kill counts, carcass persistence time is considered the most important determinant underlying underestimates of road mortality. The present study aims to describe and model carcass persistence variability on the road for different taxonomic groups under different environmental conditions throughout the year; and also to assess the effect of sampling frequency on the relative variation in road-kill estimates registered within a survey. METHODOLOGY/PRINCIPAL FINDINGS: Daily surveys of road-killed vertebrates were conducted over one year along four road sections with different traffic volumes. Survival analysis was then used to i describe carcass persistence timings for overall and for specific animal groups; ii assess optimal sampling designs according to research objectives; and iii model the influence of road, animal and weather factors on carcass persistence probabilities. Most animal carcasses persisted on the road for the first day only, with some groups disappearing at very high rates. The advisable periodicity of road monitoring that minimizes bias in road mortality estimates is daily monitoring for bats (in the morning and lizards (in the afternoon, daily monitoring for toads, small birds, small mammals, snakes, salamanders, and lagomorphs; 1 day-interval (alternate days for large birds, birds of prey, hedgehogs, and freshwater turtles; and 2 day-interval for carnivores. Multiple factors influenced the persistence probabilities of vertebrate carcasses on the road. Overall, the persistence was much lower for small animals, on roads with lower traffic volumes, for carcasses located on road lanes, and during humid conditions and high temperatures during the wet season and dry seasons, respectively. CONCLUSION/SIGNIFICANCE: The guidance given here on monitoring frequencies is particularly relevant to provide

How long do the dead survive on the road? Carcass persistence probability and implications for road-kill monitoring surveys.

Science.gov (United States)

Santos, Sara M; Carvalho, Filipe; Mira, António

2011-01-01

Road mortality is probably the best-known and visible impact of roads upon wildlife. Although several factors influence road-kill counts, carcass persistence time is considered the most important determinant underlying underestimates of road mortality. The present study aims to describe and model carcass persistence variability on the road for different taxonomic groups under different environmental conditions throughout the year; and also to assess the effect of sampling frequency on the relative variation in road-kill estimates registered within a survey. Daily surveys of road-killed vertebrates were conducted over one year along four road sections with different traffic volumes. Survival analysis was then used to i) describe carcass persistence timings for overall and for specific animal groups; ii) assess optimal sampling designs according to research objectives; and iii) model the influence of road, animal and weather factors on carcass persistence probabilities. Most animal carcasses persisted on the road for the first day only, with some groups disappearing at very high rates. The advisable periodicity of road monitoring that minimizes bias in road mortality estimates is daily monitoring for bats (in the morning) and lizards (in the afternoon), daily monitoring for toads, small birds, small mammals, snakes, salamanders, and lagomorphs; 1 day-interval (alternate days) for large birds, birds of prey, hedgehogs, and freshwater turtles; and 2 day-interval for carnivores. Multiple factors influenced the persistence probabilities of vertebrate carcasses on the road. Overall, the persistence was much lower for small animals, on roads with lower traffic volumes, for carcasses located on road lanes, and during humid conditions and high temperatures during the wet season and dry seasons, respectively. The guidance given here on monitoring frequencies is particularly relevant to provide conservation and transportation agencies with accurate numbers of road

Simplified methods for evaluating road prism stability

Science.gov (United States)

William J. Elliot; Mark Ballerini; David Hall

2003-01-01

Mass failure is one of the most common failures of low-volume roads in mountainous terrain. Current methods for evaluating stability of these roads require a geotechnical specialist. A stability analysis program, XSTABL, was used to estimate the stability of 3,696 combinations of road geometry, soil, and groundwater conditions. A sensitivity analysis was carried out to...

Capacity of two-lane roads

CSIR Research Space (South Africa)

Kennedy, DA

1991-01-01

Full Text Available Relationships of speed vs density, volume and percentage loop occupation are investigated. The effect of differing directional splits in traffic volumes is also examined. A method of determining the Level-of Service of two-lane roads in terms...

Use of porous asphalt on major roads in Johannesburg

CSIR Research Space (South Africa)

Horak, E

1994-10-01

Full Text Available Roads with high traffic volumes are synonymous with high road related noise levels. In Johannesburg road related noise pollution is recognised as a negative environmental impact. The Noise Pollution Unit of Johannesburg City Council regularly...

Factors contributing to amphibian road mortality in a wetland

Directory of Open Access Journals (Sweden)

Haijun GU, Qiang DAI, Qian WANG, Yuezhao WANG

2011-12-01

Full Text Available To understand road characteristics and landscape features associated with high road mortality of amphibians in Zoige Wetland National Nature Reserve, we surveyed road mortality along four major roads after rainfall in May and September 2007. Road mortality of three species, Rana kukunoris, Nanorana pleskei and Bufo minshanicus, was surveyed across 225 transects (115 in May and 110 in September. Transects were 100 m long and repeated every two kilometers along the four major roads. We used model averaging to assess factors that might determine amphibian road mortality. We recorded an average of 24.6 amphibian road mortalities per kilometer in May and 19.2 in September. Among road characteristics, road width was positively associated with road morality for R. kukunori and B. minshanicus. Traffic volume also increased the road mortality of B. minshanicus in September. Of the landscape features measured, area proportions of three types of grassland (wet, mesic and dry within 1 km of the roads, particularly that of wet grassland, significantly increased road mortality for R. kukunori and total mortality across all three species. To most effectively reduce road mortality of amphibians in the Zoige wetlands, we suggest better road design such as avoiding wet grasslands, minimizing road width, underground passes and traffic control measures. The implementation of public transit in the area would reduce traffic volume, and hence mortality [Current Zoology 57 (6: 768–774, 2011].

TECHNOLOGY EVALUATION REPORT, SITE PROGRAM DEMONSTRATION TEST: SHIRCO PILOT-SCALE INFRARED INCINERATION SYSTEM ROSE TOWNSHIP DEMODE ROAD SUPERFUND SITE - VOLUME II

Science.gov (United States)

The performance of the Shirco pilot-scale infrared thermal destruction system has been evaluated at the Rose Township, Demode Road Superfund Site and is presented in the report. The waste tested consisted of solvents, organics and heavy metals in an illegal dump site. Volume I gi...

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis.

Science.gov (United States)

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A G; Fahrig, Lenore; Findlay, C Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis.

Directory of Open Access Journals (Sweden)

Trina Rytwinski

Full Text Available Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill. For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis

Science.gov (United States)

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A. G.; Fahrig, Lenore; Findlay, C. Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a

Assessment of Road Infrastructures Pertaining to Malaysian Experience

Directory of Open Access Journals (Sweden)

Samsuddin Norshakina

2016-01-01

Full Text Available Road Infrastructures contribute towards many severe accidents and it needs supervision as to improve road safety levels. The numbers of fatalities have increased annually and road authority should seriously consider conducting programs or activities to periodically monitor, restore of improve road infrastructure. Implementation of road safety audits may reduce fatalities among road users and maintain road safety at acceptable standards. This paper is aimed to discuss the aspects of road infrastructure in Malaysia. The research signifies the impact of road hazards during the observations and the impact of road infrastructure types on road accidents. The F050 (Jalan Kluang-Batu Pahat road case study showed that infrastructure risk is closely related with number of accident. As the infrastructure risk increase, the number of road accidents also increase. It was also found that different road zones along Jalan Kluang-Batu Pahat showed different level of intersection volume due to number of road intersection. Thus, it is hoped that by implementing continuous assessment on road infrastructures, it might be able to reduce road accidents and fatalities among drives and the community.

Roads at risk - the impact of debris flows on road network reliability and vulnerability in southern Norway

Science.gov (United States)

Meyer, Nele Kristin; Schwanghart, Wolfgang; Korup, Oliver

2014-05-01

Norwegian's road network is frequently affected by debris flows. Both damage repair and traffic interruption generate high economic losses and necessitate a rigorous assessment of where losses are expected to be high and where preventive measures should be focused on. In recent studies, we have developed susceptibility and trigger probability maps that serve as input into a hazard calculation at the scale of first-order watersheds. Here we combine these results with graph theory to assess the impact of debris flows on the road network of southern Norway. Susceptibility and trigger probability are aggregated for individual road sections to form a reliability index that relates to the failure probability of a link that connects two network vertices, e.g., road junctions. We define link vulnerability as a function of traffic volume and additional link failure distance. Additional link failure distance is the extra length of the alternative path connecting the two associated link vertices in case the network link fails and is calculated by a shortest-path algorithm. The product of network reliability and vulnerability indices represent the risk index. High risk indices identify critical links for the Norwegian road network and are investigated in more detail. Scenarios demonstrating the impact of single or multiple debris flow events are run for the most important routes between seven large cities in southern Norway. First results show that the reliability of the road network is lowest in the central and north-western part of the study area. Road network vulnerability is highest in the mountainous regions in central southern Norway where the road density is low and in the vicinity of cities where the traffic volume is large. The scenarios indicate that city connections that have their shortest path via routes crossing the central part of the study area have the highest risk of route failure.

Effect of the Road Environment on Road Safety in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Antoniuk, Marcin

2017-10-01

Run-off-road accidents tend to be very severe because when a vehicle leaves the road, it will often crash into a solid obstacle (tree, pole, supports, front wall of a culvert, barrier). A statistical analysis of the data shows that Poland’s main roadside hazard is trees and the severity of vehicles striking a tree in a run-off-road crash. The risks are particularly high in north-west Poland with many of the roads lined up with trees. Because of the existing rural road cross-sections, i.e. having trees directly on road edge followed immediately by drainage ditches, vulnerable road users are prevented from using shoulders and made to use the roadway. With no legal definition of the road safety zone in Polish regulations, attempts to remove roadside trees lead to major conflicts with environmental stakeholders. This is why a compromise should be sought between the safety of road users and protection of the natural environment and the aesthetics of the road experience. Rather than just cut the trees, other road safety measures should be used where possible to treat the hazardous spots by securing trees and obstacles and through speed management. Accidents that are directly related to the road environment fall into the following categories: hitting a tree, hitting a barrier, hitting a utility pole or sign, vehicle rollover on the shoulder, vehicle rollover on slopes or in ditch. The main consequence of a roadside hazard is not the likelihood of an accident itself but of its severity. Poland’s roadside accident severity is primarily the result of poor design or operation of road infrastructure. This comes as a consequence of a lack of regulations or poorly defined regulations and failure to comply with road safety standards. The new analytical model was designed as a combination of the different factors and one that will serve as a comprehensive model. It was assumed that it will describe the effect of the roadside on the number of accidents and their consequences

Applying the dynamic cone penetrometer (DCP) design method to low volume roads

CSIR Research Space (South Africa)

Paige-Green, P

2011-07-01

Full Text Available The Dynamic Cone Penetrometer (DCP) has been in use since the 1950s for various applications in pavement investigation. During the 1980s, Kleyn and Van Zyl described a method for upgrading unsealed roads to light sealed road standard based...

Assessment of rockfall risk along roads

Science.gov (United States)

Budetta, P.

2004-03-01

This paper contains a method for the analysis of rockfall risk along roads and motorways. The method is derived from the Rockfall Hazard Rating System (RHRS) developed by Pierson et al. (1990) at the Oregon State Highway Division. The RHRS provides a rational way to make informed decisions on where and how to spend construction funds. Exponential scoring functions are used to represent the increases, respectively, in hazard and in vulnerability that are reflected in the nine categories forming the classification. The resulting total score contains the essential elements regarding the evaluation of the degree of the exposition to the risk along roads. In the modified method, the ratings for the categories "ditch effectiveness", "geologic characteristic", "volume of rockfall/block size", "climate and water circulation" and "rockfall history" have been rendered more easy and objective. The main modifications regard the introduction of Slope Mass Rating by Romana (1985, 1988, 1991) improving the estimate of the geologic characteristics, of the volume of the potentially unstable blocks and the underground water circulation. Other modifications regard the scoring for the categories "decision sight distance" and "road geometry". For these categories, the Italian National Council's standards (Consiglio Nazionale delle Ricerche - CNR) have been used (CNR, 1980). The method must be applied in both the traffic directions because the percentage of reduction in the decision sight distance greatly affects the results. An application of the modified method to a 2km long section of the Sorrentine road (no 145) in Southern Italy was developed. A high traffic intensity affects the entire section of the road and rockfalls periodically cause casualties, as well as a large amount of damage and traffic interruptions. The method was applied to seven cross sections of slopes adjacent to the Sorrentine road. For these slopes, the analysis shows that the risk is unacceptable and it should

Reptile road-kills in Southern Brazil: Composition, hot moments and hotspots.

Science.gov (United States)

Gonçalves, Larissa Oliveira; Alvares, Diego Janisch; Teixeira, Fernanda Zimmermann; Schuck, Gabriela; Coelho, Igor Pfeifer; Esperandio, Isadora Beraldi; Anza, Juan; Beduschi, Júlia; Bastazini, Vinicius Augusto Galvão; Kindel, Andreas

2018-02-15

Understanding road-kill patterns is the first step to assess the potential effects of road mortality on wildlife populations, as well as to define the need for mitigation and support its planning. Reptiles are one of the vertebrate groups most affected by roads through vehicle collisions, both because they are intentionally killed by drivers, and due to their biological needs, such as thermoregulation, which make them more prone to collisions. We conducted monthly road surveys (33months), searching for carcasses of freshwater turtles, lizards, and snakes on a 277-km stretch of BR-101 road in Southernmost Brazil to estimate road-kill composition and magnitude and to describe the main periods and locations of road-kills. We modeled the distribution of road-kills in space according to land cover classes and local traffic volume. Considering the detection capacity of our method and carcass persistence probability, we estimated that 15,377 reptiles are road-killed per year (55reptiles/km/year). Road-kills, especially lizards and snakes, were concentrated during summer, probably due to their higher activity in this period. Road-kill hotspots were coincident among freshwater turtles, lizards, and snakes. Road-kill distribution was negatively related to pine plantations, and positively related to rice plantations and traffic volume. A cost-benefit analysis highlighted that if mitigation measures were installed at road-kill hotspots, which correspond to 21% of the road, they could have avoided up to 45% of recorded reptile fatalities, assuming a 100% mitigation effectiveness. Given the congruent patterns found for all three taxa, the same mitigation measures could be used to minimize the impacts of collision on local herpetofauna. Copyright © 2017 Elsevier B.V. All rights reserved.

Over-pressure in road tankers; Ueberdrucksicherung an Tankfahrzeugen

Energy Technology Data Exchange (ETDEWEB)

Frobese, Dirk-Hans; Pape, Harald [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

2011-08-15

This work was aimed at determining possible causes of overpressure damages on road tankers. In cooperation with the manufacturers of road tankers, the equipment of road tankers usually used today was, therefore, discussed and possible error sources determined. In measurements performed at two filling stations, real pressure, temperature and volume flow ratios for the loading of a road tanker were recorded. Parallel to it, tests in a cold chamber were carried out to determine the possibility and the general conditions of an icing of the tilting valve and the flame arrester. With these results, scenarios have been worked out which can explain known overpressure damaging events. On the basis of a risk assessment, measures are described how such overpressure damages on road tankers can in future be avoided. (orig.)

Local government note: new perspectives of unsealed roads in South Africa

CSIR Research Space (South Africa)

Paige-Green, P

2007-09-01

Full Text Available in most countries. In South Africa they make up more than 75 per cent of the total road network and probably 95 per cent of the low volume road network. Unsealed roads come with various disadvantages over sealed roads, primarily the ongoing... and continual maintenance as well as the accompanying environmental problems. The maintenance, whether grader blading to restore riding quality or replacing the gravel lost under traffic and environmental actions is both costly and disruptive to the normal...

Performance of Low-Volume Roads with Wearing Course Layer of Silty Sandy Soil Modified with Rice Husk Ash and Lime

Energy Technology Data Exchange (ETDEWEB)

Behak Katz, L.; Musso Laespiga, M.

2016-07-01

Rice husk ash (RHA) is a by-product of rice milling. Its use as soil stabilizer is a way to replace the final disposal with environmental benefit. However, RHA is not cementitious itself but when mixed with lime forms cements which improve the soil properties. A research of performance of a silty sandy soil modified with RHA and lime as wearing course layer of low-volume roads was conducted through two full-scale test sections with different pavements built in Artigas, northern Uruguay. The alkaline reactivity of RHA is low because the husk burning is not controlled. The soil-RHA-lime mix design was conducted according to the Thompson’s Method. The pavement test sections were monitored through deflection measures by Benkelman beam and observations of surface condition. The deflections decreased over time in both test sections due to the development of cementation of the study materials. After one year, the dust emission was reduced, the wet skid resistance of pavement surfaces improved and there was not rutting. The researched pavements have had a good performance under the existing traffic and environmental conditions, demonstrating that wearing course layer of silty sand modified with RHA and lime is an alternative to improve the condition of low-volume roads and to replace the final disposal of RHA, with environmental, social and economic benefits. (Author)

Alternatives to conventional gravel wearing courses on low volume rural roads: Phase 1

CSIR Research Space (South Africa)

Paige-Green, P

2003-01-01

Full Text Available Adviser Abstract Gundo Lashu, the ‘Labour Intensive Rural Roads Maintenance Programme’ that is currently being implemented in Limpopo Province, South Africa has set out to train 24 emerging contractors in rehabilitation of rural gravel roads. All.... The proposal is to treat the in situ materials and sand with a diluted emulsion and a nominal cement application (to assist with breaking of the emulsion) and surface the road with an Otta seal. The aggregate for the Otta seal can be obtained form...

Liquid volume monitoring based on ultrasonic sensor and Arduino microcontroller

Science.gov (United States)

Husni, M.; Siahaan, D. O.; Ciptaningtyas, H. T.; Studiawan, H.; Aliarham, Y. P.

2016-04-01

Incident of oil leakage and theft in oil tank often happens. To prevent it, the liquid volume insides the tank needs to be monitored continuously. Aim of the study is to calculate the liquid volume inside oil tank on any road condition and send the volume data and location data to the user. This research use some ultrasonic sensors (to monitor the fluid height), Bluetooth modules (to sent data from the sensors to the Arduino microcontroller), Arduino Microcontroller (to calculate the liquid volume), and also GPS/GPRS/GSM Shield module (to get location of vehicle and sent the data to the Server). The experimental results show that the accuracy rate of monitoring liquid volume inside tanker while the vehicle is in the flat road is 99.33% and the one while the vehicle is in the road with elevation angle is 84%. Thus, this system can be used to monitor the tanker position and the liquid volume in any road position continuously via web application to prevent illegal theft.

Detecting Anomaly in Traffic Flow from Road Similarity Analysis

KAUST Repository

Liu, Xinran

2016-06-02

Taxies equipped with GPS devices are considered as 24-hour moving sensors widely distributed in urban road networks. Plenty of accurate and realtime trajectories of taxi are recorded by GPS devices and are commonly studied for understanding traffic dynamics. This paper focuses on anomaly detection in traffic volume, especially the non-recurrent traffic anomaly caused by unexpected or transient incidents, such as traffic accidents, celebrations and disasters. It is important to detect such sharp changes of traffic status for sensing abnormal events and planning their impact on the smooth volume of traffic. Unlike existing anomaly detection approaches that mainly monitor the derivation of current traffic status from history in the past, the proposed method in this paper evaluates the abnormal score of traffic on one road by comparing its current traffic volume with not only its historical data but also its neighbors. We define the neighbors as the roads that are close in sense of both geo-location and traffic patterns, which are extracted by matrix factorization. The evaluation results on trajectories data of 12,286 taxies over four weeks in Beijing show that our approach outperforms other baseline methods with higher precision and recall.

Modeling an impact of road geometric design on vehicle energy consumption

Science.gov (United States)

Luin, Blaž; Petelin, Stojan; Al-Mansour, Fouad

2017-11-01

Some roads connect traffic origins and destinations directly, some use winding, indirect routes. Indirect connections result in longer distances driven and increased fuel consumption. A similar effect is observed on congested roads and mountain roads with many changes in altitude. Therefore a framework to assess road networks based on energy consumption is proposed. It has been shown that road geometry has significant impact on overall traffic energy consumption and emissions. The methodology presented in the paper analyzes impact of traffic volume, shares of vehicle classes, road network configuration on the energy used by the vehicles. It can be used to optimize energy consumption with efficient traffic management and to choose optimum new road in the design phase. This is especially important as the energy consumed by the vehicles shortly after construction supersedes the energy spent for the road construction.

Demonstration uncertainty/sensitivity analysis using the health and economic consequence model CRAC2

International Nuclear Information System (INIS)

Alpert, D.J.; Iman, R.L.; Johnson, J.D.; Helton, J.C.

1984-12-01

The techniques for performing uncertainty/sensitivity analyses compiled as part of the MELCOR program appear to be well suited for use with a health and economic consequence model. Two replicate samples of size 50 gave essentially identical results, indicating that for this case, a Latin hypercube sample of size 50 seems adequate to represent the distribution of results. Though the intent of this study was a demonstration of uncertainty/sensitivity analysis techniques, a number of insights relevant to health and economic consequence modeling can be gleaned: uncertainties in early deaths are significantly greater than uncertainties in latent cancer deaths; though the magnitude of the source term is the largest source of variation in estimated distributions of early deaths, a number of additional parameters are also important; even with the release fractions for a full SST1, one quarter of the CRAC2 runs gave no early deaths; and comparison of the estimates of mean early deaths for a full SST1 release in this study with those of recent point estimates for similar conditions indicates that the recent estimates may be significant overestimations of early deaths. Estimates of latent cancer deaths, however, are roughly comparable. An analysis of the type described here can provide insights in a number of areas. First, the variability in the results gives an indication of the potential uncertainty associated with the calculations. Second, the sensitivity of the results to assumptions about the input variables can be determined. Research efforts can then be concentrated on reducing the uncertainty in the variables which are the largest contributors to uncertainty in results

Assessment of rockfall risk along roads

Directory of Open Access Journals (Sweden)

P. Budetta

2004-01-01

Full Text Available This paper contains a method for the analysis of rockfall risk along roads and motorways. The method is derived from the Rockfall Hazard Rating System (RHRS developed by Pierson et al. (1990 at the Oregon State Highway Division. The RHRS provides a rational way to make informed decisions on where and how to spend construction funds. Exponential scoring functions are used to represent the increases, respectively, in hazard and in vulnerability that are reflected in the nine categories forming the classification. The resulting total score contains the essential elements regarding the evaluation of the degree of the exposition to the risk along roads. In the modified method, the ratings for the categories 'ditch effectiveness', 'geologic characteristic', 'volume of rockfall/block size', 'climate and water circulation' and 'rockfall history' have been rendered more easy and objective. The main modifications regard the introduction of Slope Mass Rating by Romana (1985, 1988, 1991 improving the estimate of the geologic characteristics, of the volume of the potentially unstable blocks and the underground water circulation. Other modifications regard the scoring for the categories 'decision sight distance' and 'road geometry'. For these categories, the Italian National Council's standards (Consiglio Nazionale delle Ricerche - CNR have been used (CNR, 1980. The method must be applied in both the traffic directions because the percentage of reduction in the decision sight distance greatly affects the results. An application of the modified method to a 2km long section of the Sorrentine road (no 145 in Southern Italy was developed. A high traffic intensity affects the entire section of the road and rockfalls periodically cause casualties, as well as a large amount of damage and traffic interruptions. The method was applied to seven cross sections of slopes adjacent to the Sorrentine road. For these slopes, the analysis shows that the risk is

Intermediate Volatility Organic Compound Emissions from On-Road Gasoline Vehicles and Small Off-Road Gasoline Engines.

Science.gov (United States)

Zhao, Yunliang; Nguyen, Ngoc T; Presto, Albert A; Hennigan, Christopher J; May, Andrew A; Robinson, Allen L

2016-04-19

Dynamometer experiments were conducted to characterize the intermediate volatility organic compound (IVOC) emissions from a fleet of on-road gasoline vehicles and small off-road gasoline engines. IVOCs were quantified through gas chromatography/mass spectrometry analysis of adsorbent samples collected from a constant volume sampler. The dominant fraction (>80%, on average) of IVOCs could not be resolved on a molecular level. These unspeciated IVOCs were quantified as two chemical classes (unspeciated branched alkanes and cyclic compounds) in 11 retention-time-based bins. IVOC emission factors (mg kg-fuel(-1)) from on-road vehicles varied widely from vehicle to vehicle, but showed a general trend of lower emissions for newer vehicles that met more stringent emission standards. IVOC emission factors for 2-stroke off-road engines were substantially higher than 4-stroke off-road engines and on-road vehicles. Despite large variations in the magnitude of emissions, the IVOC volatility distribution and chemical characteristics were consistent across all tests and IVOC emissions were strongly correlated with nonmethane hydrocarbons (NMHCs), primary organic aerosol and speciated IVOCs. Although IVOC emissions only correspond to approximately 4% of NMHC emissions from on-road vehicles over the cold-start unified cycle, they are estimated to produce as much or more SOA than single-ring aromatics. Our results clearly demonstrate that IVOCs from gasoline engines are an important class of SOA precursors and provide observational constraints on IVOC emission factors and chemical composition to facilitate their inclusion into atmospheric chemistry models.

Do road planners produce more 'honest numbers' than rail planners?

DEFF Research Database (Denmark)

Næss, Petter; Flyvbjerg, Bent; Buhl, Søren L.

2006-01-01

Based on a review of available data from a database on large-scale transport infrastructure projects, this paper investigates the hypothesis that traffic forecasts for road links in Europe are geographically biased with underestimated traffic volumes in metropolitan areas and overestimated traffic...... volumes in remote regions. The present data do not support this hypothesis. Since previous studies have shown a strong tendency to overestimated forecasts of the number of passengers on new rail projects, it could be speculated that road planners are more skilful and/or honest than rail planners. However......, during the period when the investigated projects were planned (up to the late 1980s), there were hardly any strong incentives for road planners to make biased forecasts in order to place their projects in a more flattering light. Future research might uncover whether the change from the ‘predict...

Determining soil erosion from roads in coastal plain of Alabama

Science.gov (United States)

McFero Grace; W.J. Elliot

2008-01-01

This paper reports soil losses and observed sediment deposition for 16 randomly selected forest road sections in the National Forests of Alabama. Visible sediment deposition zones were tracked along the stormwater flow path to the most remote location as a means of quantifying soil loss from road sections. Volumes of sediment in deposition zones were determined by...

A Few Large Roads or Many Small Ones? How to Accommodate Growth in Vehicle Numbers to Minimise Impacts on Wildlife

Science.gov (United States)

Rhodes, Jonathan R.; Lunney, Daniel; Callaghan, John; McAlpine, Clive A.

2014-01-01

Roads and vehicular traffic are among the most pervasive of threats to biodiversity because they fragmenting habitat, increasing mortality and opening up new areas for the exploitation of natural resources. However, the number of vehicles on roads is increasing rapidly and this is likely to continue into the future, putting increased pressure on wildlife populations. Consequently, a major challenge is the planning of road networks to accommodate increased numbers of vehicles, while minimising impacts on wildlife. Nonetheless, we currently have few principles for guiding decisions on road network planning to reduce impacts on wildlife in real landscapes. We addressed this issue by developing an approach for quantifying the impact on wildlife mortality of two alternative mechanisms for accommodating growth in vehicle numbers: (1) increasing the number of roads, and (2) increasing traffic volumes on existing roads. We applied this approach to a koala (Phascolarctos cinereus) population in eastern Australia and quantified the relative impact of each strategy on mortality. We show that, in most cases, accommodating growth in traffic through increases in volumes on existing roads has a lower impact than building new roads. An exception is where the existing road network has very low road density, but very high traffic volumes on each road. These findings have important implications for how we design road networks to reduce their impacts on biodiversity. PMID:24646891

A few large roads or many small ones? How to accommodate growth in vehicle numbers to minimise impacts on wildlife.

Directory of Open Access Journals (Sweden)

Jonathan R Rhodes

Full Text Available Roads and vehicular traffic are among the most pervasive of threats to biodiversity because they fragmenting habitat, increasing mortality and opening up new areas for the exploitation of natural resources. However, the number of vehicles on roads is increasing rapidly and this is likely to continue into the future, putting increased pressure on wildlife populations. Consequently, a major challenge is the planning of road networks to accommodate increased numbers of vehicles, while minimising impacts on wildlife. Nonetheless, we currently have few principles for guiding decisions on road network planning to reduce impacts on wildlife in real landscapes. We addressed this issue by developing an approach for quantifying the impact on wildlife mortality of two alternative mechanisms for accommodating growth in vehicle numbers: (1 increasing the number of roads, and (2 increasing traffic volumes on existing roads. We applied this approach to a koala (Phascolarctos cinereus population in eastern Australia and quantified the relative impact of each strategy on mortality. We show that, in most cases, accommodating growth in traffic through increases in volumes on existing roads has a lower impact than building new roads. An exception is where the existing road network has very low road density, but very high traffic volumes on each road. These findings have important implications for how we design road networks to reduce their impacts on biodiversity.

A few large roads or many small ones? How to accommodate growth in vehicle numbers to minimise impacts on wildlife.

Science.gov (United States)

Rhodes, Jonathan R; Lunney, Daniel; Callaghan, John; McAlpine, Clive A

2014-01-01

Roads and vehicular traffic are among the most pervasive of threats to biodiversity because they fragmenting habitat, increasing mortality and opening up new areas for the exploitation of natural resources. However, the number of vehicles on roads is increasing rapidly and this is likely to continue into the future, putting increased pressure on wildlife populations. Consequently, a major challenge is the planning of road networks to accommodate increased numbers of vehicles, while minimising impacts on wildlife. Nonetheless, we currently have few principles for guiding decisions on road network planning to reduce impacts on wildlife in real landscapes. We addressed this issue by developing an approach for quantifying the impact on wildlife mortality of two alternative mechanisms for accommodating growth in vehicle numbers: (1) increasing the number of roads, and (2) increasing traffic volumes on existing roads. We applied this approach to a koala (Phascolarctos cinereus) population in eastern Australia and quantified the relative impact of each strategy on mortality. We show that, in most cases, accommodating growth in traffic through increases in volumes on existing roads has a lower impact than building new roads. An exception is where the existing road network has very low road density, but very high traffic volumes on each road. These findings have important implications for how we design road networks to reduce their impacts on biodiversity.

DESIGNING ROADS IN GRENLAND USING GIS TECHNOLOGY

Directory of Open Access Journals (Sweden)

Abdel A.Z. Barten

2015-01-01

Full Text Available Designing a road in the Arctic (Greenland which stretches 157 km between the towns of Sisimiut and Kangerlussuaq was very challenging. Difficult climatic and geotechnical conditions and presence of permafrost required some in-depth analysis and research. Geotechnical investigations were conducted along the entire route. The investigations included field geological and geophysical studies and survey using aerial photography.Based on the investigations a digital model of the area 2 km Ѕ 170 km was prepared. Using a Novapoint software a detailed geometric model was created which allowed for calculationsof the volume of earthworks and creation of transverse and longitudinal sections of the road. A virtual model of the entire road and a movie were made based on the results of all investigations.

Road safety and bicycle usage impacts of unbundling vehicular and cycle traffic in Dutch urban networks

NARCIS (Netherlands)

Schepers, Paul; Heinen, Eva; Methorst, Rob; Wegman, Fred

2013-01-01

Bicycle-motor vehicle crashes are concentrated along distributor roads where cyclists are exposed to greater volumes of high-speed motorists than they would experience on access roads. This study examined the road safety impact of network-level separation of vehicular and cycle traffic in Dutch

Road safety and bicycle usage impacts of unbundling vehicular and cycle traffic in Dutch urban networks.

NARCIS (Netherlands)

Schepers, P. Heinen, E. Methorst, R. & Wegman, F.

2015-01-01

Bicycle-motor vehicle crashes are concentrated along distributor roads where cyclists are exposed to greater volumes of high-speed motorists than they would experience on access roads. This study examined the road safety impact of network-level separation of vehicular and cycle traffic in Dutch

Effects of roads on survival of San Clemente Island foxes

Science.gov (United States)

Snow, N.P.; Andelt, William F.; Stanley, T.R.; Resnik, J.R.; Munson, L.

2012-01-01

Roads generate a variety of influences on wildlife populations; however, little is known about the effects of roads on endemic wildlife on islands. Specifically, road-kills of island foxes (Urocyon littoralis) on San Clemente Island (SCI), Channel Islands, California, USA are a concern for resource managers. To determine the effects of roads on island foxes, we radiocollared foxes using a 3-tiered sampling design to represent the entire population in the study area, a sub-population near roads, and a sub-population away from roads on SCI. We examined annual survival rates using nest-survival models, causes of mortalities, and movements for each sample. We found the population had high annual survival (0.90), although survival declined with use of road habitat, particularly for intermediate-aged foxes. Foxes living near roads suffered lower annual survival (0.76), resulting from high frequencies of road-kills (7 of 11 mortalities). Foxes living away from roads had the highest annual survival (0.97). Road-kill was the most prominent cause of mortality detected on SCI, which we estimated as killing 3-8% of the population in the study area annually. Based on movements, we were unable to detect any responses by foxes that minimized their risks from roads. The probabilities of road-kills increased with use of the road habitat, volume of traffic, and decreasing road sinuosity. We recommend that managers should attempt to reduce road-kills by deterring or excluding foxes from entering roads, and attempting to modify behaviors of motorists to be vigilant for foxes. ?? 2011 The Wildlife Society.

Optimal policies for aggregate recycling from decommissioned forest roads.

Science.gov (United States)

Thompson, Matthew; Sessions, John

2008-08-01

To mitigate the adverse environmental impact of forest roads, especially degradation of endangered salmonid habitat, many public and private land managers in the western United States are actively decommissioning roads where practical and affordable. Road decommissioning is associated with reduced long-term environmental impact. When decommissioning a road, it may be possible to recover some aggregate (crushed rock) from the road surface. Aggregate is used on many low volume forest roads to reduce wheel stresses transferred to the subgrade, reduce erosion, reduce maintenance costs, and improve driver comfort. Previous studies have demonstrated the potential for aggregate to be recovered and used elsewhere on the road network, at a reduced cost compared to purchasing aggregate from a quarry. This article investigates the potential for aggregate recycling to provide an economic incentive to decommission additional roads by reducing transport distance and aggregate procurement costs for other actively used roads. Decommissioning additional roads may, in turn, result in improved aquatic habitat. We present real-world examples of aggregate recycling and discuss the advantages of doing so. Further, we present mixed integer formulations to determine optimal levels of aggregate recycling under economic and environmental objectives. Tested on an example road network, incorporation of aggregate recycling demonstrates substantial cost-savings relative to a baseline scenario without recycling, increasing the likelihood of road decommissioning and reduced habitat degradation. We find that aggregate recycling can result in up to 24% in cost savings (economic objective) and up to 890% in additional length of roads decommissioned (environmental objective).

Erosion and sediment delivery following removal of forest roads

Science.gov (United States)

Madej, Mary Ann

2001-01-01

Erosion control treatments were applied to abandoned logging roads in California, with the goal of reducing road-related sediment input to streams and restoring natural hydrologic patterns on the landscape. Treatment of stream crossings involved excavating culverts and associated road fill and reshaping streambanks. A variety of techniques were applied to road benches, which included decompacting the road surface, placing unstable road fill in more stable locations, and re-establishing natural surface drainage patterns. Following treatment and a 12-year recurrence-interval storm, some road reaches and excavated stream crossings showed evidence of mass movement failures, gullying, bank erosion and channel incision. Post-treatment erosion from excavated stream crossings was related to two variables: a surrogate for stream power (drainage area × channel gradient) and the volume of fill excavated from the channel. Post-treatment erosion on road reaches was related to four explanatory variables: method of treatment, hillslope position (upper, mid-slope or lower), date of treatment, and an interaction term (hillslope position × method of treatment). Sediment delivery from treated roads in upper, middle and lower hillslope positions was 10, 135 and 550 m3 of sediment per kilometre of treated roads, respectively. In contrast, inventories of almost 500 km of forest roads in adjacent catchments indicate that untreated roads produced 1500 to 4700 m3 of sediment per kilometre of road length. Erosion from 300 km of treated roads contributed less than 2 per cent of the total sediment load of Redwood Creek during the period 1978 to 1998. Although road removal treatments do not completely eliminate erosion associated with forest roads, they do substantially reduce sediment yields from abandoned logging roads.

2nd Road Vehicle Automation Workshop

CERN Document Server

Beiker, Sven; Road Vehicle Automation

2014-01-01

This contributed volume covers all relevant aspects of road vehicle automation including societal impacts, legal matters, and technology innovation from the perspectives of a multitude of public and private actors. It is based on an expert workshop organized by the Transportation Research Board at Stanford University in July 2013. The target audience primarily comprises academic researchers, but the book may also be of interest to practitioners and professionals. Higher levels of road vehicle automation are considered beneficial for road safety, energy efficiency, productivity, convenience, and social inclusion. The necessary key technologies in the fields of object-recognition systems, data processing, and infrastructure communication have been consistently developed over the recent years and are mostly available on the market today. However, there is still a need for substantial research and development, e.g. with interactive maps, data processing, functional safety, and the fusion of different data sources...

The Evaluation of Screening Process and Local Bureaucracy in Determining the Priority of Urban Roads Maintenance and Rehabilitation

Science.gov (United States)

Hendhratmoyo, Andri; Syafi'i; Pungky Pramesti, Florentina

2017-11-01

Due to the limited budget of urban roads maintenance and rehabilitation, its prioritizationis inevitable. Many models have been developed to solve these problems. That is the reason why the purpose of this study was to evaluate the screening process in the decision making of the urban roads maintenance and rehabilitation priority. The prioritization that have to be taken into account on the effect of important criteria are road condition, traffic volume, budget processing and land use. 30 stakeholders were asked to fill in the questionnaires. The object of this case study are 188 urban roads sections at Ponorogo in order to examine the priorities. The researchers collected the data from Surface Distress Index (SDI), traffic volume, budget processing and land use of these road sections. Based on analysis, the weights of the criteria were: road condition (W1) = 0,411; traffic volume (W2) = 0,122; budget processing (W3) = 0,363 and land use (W4) = 0,105. The result of this study by the comparison of the index values of the alternatives priorities, Nyi Ageng Serang Street, was revealed to have the highest priority over the other streets regarding of maintenance and rehabilitation activities.

a Cross-Sectional Study on Insomnia among Japanese Adult Women in Relation to Night-Time Road Traffic Noise

Science.gov (United States)

Kageyama, T.; Kabuto, M.; Nitta, N.; Kurokawa, Y.; Taira, K.; Suzuki, S.; Takemoto, T.

1997-08-01

In an effort to determine the contribution of night-time road traffic noise to insomnia in the general population, 3600 adult Japanese women living in urban residential areas were surveyed. Living near a road with a heavy traffic volume is one of the risk factors for insomnia. The risk for insomnia in the zones 0-20 m from the main roads increased linearly with the night-time traffic volume. This suggests that road traffic noise raises the sound level in bedrooms in such zones, and consequently the prevalence rate of insomnia among the residents, and that noise-induced insomnia is an important public health problem, at least in highly urbanized areas.

The road safety audit and road safety inspection.

NARCIS (Netherlands)

2007-01-01

A road safety audit (RSA) and a road safety inspection (RSI) are used to test the safety level of the road infrastructure. The RSA tests the design of new roads or the reconstruction of existing roads, whereas the RSI is used for testing existing roads. An RSA, therefore, aims to 'improve' the road

Mine haul road fugitive dust emission and exposure characterisation

Energy Technology Data Exchange (ETDEWEB)

Thompson, R.J.; Visser, A.T. [University of Pretoria, Pretoria (South Africa). Dept. of Mining Engineering

2001-03-01

Excessive dust generation from mine haul roads is a problem common to most surface coal mining operations. Optimal wearing course material selection parameters reduce, but do not toally eliminate the potential to produce dust. For existing operations, which may not have optimally designed and maintained roads, the problem of identifying the haul road dust defect, quantifying its impact on both safety and health and assigning priorities within the constraints of limited capital and manpower is problematic. This is reflected in the fact that most surface mine operators agree dust-free roads are desirable, but find it difficult to translate this into cost-effective betterment activities. The aim of this paper is to describe fugitive dust emission and exposure characteristics associated with ultra-heavy mine haul trucks running on unpaved mine haul roads. Models are described which enable mines to assess the likely dustiness of their chosen haul road material as a function of surface loading of fines, traffic types and volume, together with various material parameters. By combining these models with the results of quantitative exposure profiling, a mine can, in conjunction with the assessment, determine the most cost- and safety-effective haul road dust management strategy. 18 refs., 10 figs., 2 tabs.

On Transport Service Selection in Intermodal Rail/Road Distribution Networks

Directory of Open Access Journals (Sweden)

Christian Bierwirth

2012-11-01

Full Text Available Intermodal rail/road freight transport constitutes an alternative to long-haul road transport for the distribution of large volumes of goods. The paper introduces the intermodal transportation problem for the tactical planning of mode and service selection. In rail mode, shippers either book train capacity on a per-unit basis or charter block trains completely. Road mode is used for short-distance haulage to intermodal terminals and for direct shipments to customers. We analyze the competition of road and intermodal transportation with regard to freight consolidation and service cost on a model basis. The approach is applied to a distribution system of an industrial company serving customers in eastern Europe. The case study investigates the impact of transport cost and consolidation on the optimal modal split.

Assessing the impact of road traffic on cycling for leisure and cycling to work

Directory of Open Access Journals (Sweden)

Wareham Nicholas J

2011-06-01

Full Text Available Abstract Background To explore the relationship between leisure and commuter cycling with objectively measured levels of road traffic and whether any relationship was affected by traffic levels directly outside of home or in local neighbourhood. Findings We conducted a secondary analysis of data from the UK European Prospective Investigation of Cancer (EPIC Norfolk cohort in 2009. We used a geographical information system (GIS and gender specific multivariate models to relate 13 927 participants' reported levels of cycling with an index of road traffic volume (Road Traffic Volume Index Score - RTVIS. RTVIS were calculated around each participants home, using four distance based buffers, (0.5 km, 1 km, 2 km and 3.2 km. Models were adjusted for age, social status, education, car access and deprivation. Both genders had similar decreases in leisure cycling as traffic volumes increased at greater distances from home (OR 0.42, (95% CI 0.32-0.52, p Conclusions Traffic volumes appear to have greater impact on leisure cycling than commuter cycling. Future research should investigate the importance of traffic on different types of cycling and include psychosocial correlates.

Road network safety evaluation using Bayesian hierarchical joint model.

Science.gov (United States)

Wang, Jie; Huang, Helai

2016-05-01

Safety and efficiency are commonly regarded as two significant performance indicators of transportation systems. In practice, road network planning has focused on road capacity and transport efficiency whereas the safety level of a road network has received little attention in the planning stage. This study develops a Bayesian hierarchical joint model for road network safety evaluation to help planners take traffic safety into account when planning a road network. The proposed model establishes relationships between road network risk and micro-level variables related to road entities and traffic volume, as well as socioeconomic, trip generation and network density variables at macro level which are generally used for long term transportation plans. In addition, network spatial correlation between intersections and their connected road segments is also considered in the model. A road network is elaborately selected in order to compare the proposed hierarchical joint model with a previous joint model and a negative binomial model. According to the results of the model comparison, the hierarchical joint model outperforms the joint model and negative binomial model in terms of the goodness-of-fit and predictive performance, which indicates the reasonableness of considering the hierarchical data structure in crash prediction and analysis. Moreover, both random effects at the TAZ level and the spatial correlation between intersections and their adjacent segments are found to be significant, supporting the employment of the hierarchical joint model as an alternative in road-network-level safety modeling as well. Copyright © 2016 Elsevier Ltd. All rights reserved.

Trajectory of a road vehicle during road maintenance

OpenAIRE

Stachová Darina

2017-01-01

Consider a vehicle moving on a road whose usage over time creates an uneven surface on the road. Road unevenness that we encounter on surface communications often arises as a consequence of dynamical effects of moving vehicles, of weather changes, and due to road construction works. This article concerns with mathematical modeling of the trajectory of a road vehicle moving on such a surface during the course of road maintenance.

Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method

Directory of Open Access Journals (Sweden)

Mohd Razelan Intan Suhana

2017-01-01

Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.

Road networks predict human influence on Amazonian bird communities.

Science.gov (United States)

Ahmed, Sadia E; Lees, Alexander C; Moura, Nárgila G; Gardner, Toby A; Barlow, Jos; Ferreira, Joice; Ewers, Robert M

2014-11-22

Road building can lead to significant deleterious impacts on biodiversity, varying from direct road-kill mortality and direct habitat loss associated with road construction, to more subtle indirect impacts from edge effects and fragmentation. However, little work has been done to evaluate the specific effects of road networks and biodiversity loss beyond the more generalized effects of habitat loss. Here, we compared forest bird species richness and composition in the municipalities of Santarém and Belterra in Pará state, eastern Brazilian Amazon, with a road network metric called 'roadless volume (RV)' at the scale of small hydrological catchments (averaging 3721 ha). We found a significant positive relationship between RV and both forest bird richness and the average number of unique species (species represented by a single record) recorded at each site. Forest bird community composition was also significantly affected by RV. Moreover, there was no significant correlation between RV and forest cover, suggesting that road networks may impact biodiversity independently of changes in forest cover. However, variance partitioning analysis indicated that RV has partially independent and therefore additive effects, suggesting that RV and forest cover are best used in a complementary manner to investigate changes in biodiversity. Road impacts on avian species richness and composition independent of habitat loss may result from road-dependent habitat disturbance and fragmentation effects that are not captured by total percentage habitat cover, such as selective logging, fire, hunting, traffic disturbance, edge effects and road-induced fragmentation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Road networks predict human influence on Amazonian bird communities

Science.gov (United States)

Ahmed, Sadia E.; Lees, Alexander C.; Moura, Nárgila G.; Gardner, Toby A.; Barlow, Jos; Ferreira, Joice; Ewers, Robert M.

2014-01-01

Road building can lead to significant deleterious impacts on biodiversity, varying from direct road-kill mortality and direct habitat loss associated with road construction, to more subtle indirect impacts from edge effects and fragmentation. However, little work has been done to evaluate the specific effects of road networks and biodiversity loss beyond the more generalized effects of habitat loss. Here, we compared forest bird species richness and composition in the municipalities of Santarém and Belterra in Pará state, eastern Brazilian Amazon, with a road network metric called ‘roadless volume (RV)’ at the scale of small hydrological catchments (averaging 3721 ha). We found a significant positive relationship between RV and both forest bird richness and the average number of unique species (species represented by a single record) recorded at each site. Forest bird community composition was also significantly affected by RV. Moreover, there was no significant correlation between RV and forest cover, suggesting that road networks may impact biodiversity independently of changes in forest cover. However, variance partitioning analysis indicated that RV has partially independent and therefore additive effects, suggesting that RV and forest cover are best used in a complementary manner to investigate changes in biodiversity. Road impacts on avian species richness and composition independent of habitat loss may result from road-dependent habitat disturbance and fragmentation effects that are not captured by total percentage habitat cover, such as selective logging, fire, hunting, traffic disturbance, edge effects and road-induced fragmentation. PMID:25274363

Polycyclic aromatic hydrocarbons associated with road deposited solid and their ecological risk: Implications for road stormwater reuse

International Nuclear Information System (INIS)

Liu, Liang; Liu, An; Li, Yang; Zhang, Lixun; Zhang, Guijuan; Guan, Yuntao

2016-01-01

Reusing stormwater is becoming popular worldwide. However, urban road stormwater commonly contains toxic pollutants, such as polycyclic aromatic hydrocarbons (PAHs), which could undermine reuse safety. This study investigated pollution level of PAHs and their composition build-up on urban roads in a typical megacity in South China. The potential ecological risk posed by PAHs associated with road deposited solid (RDS) was also assessed. Results showed that ecological risk levels varied based on different land use types, which could be significantly influenced by the composition of PAHs and characteristics of RDS. A higher percentage of high-ring PAHs, such as more than four rings, could pose higher ecological risk and are more likely to undermine stormwater reuse safety. Additionally, the degree of traffic congestion rather than traffic volume was found to exert a more significant influence on the generation of high-ring PAH generation. Therefore, stormwater from more congested roads might need proper treatment (particularly for removing high-ring PAHs) before reuse or could be suitable for purposes requiring low-water-quality. The findings of this study are expected to contribute to adequate stormwater reuse strategy development and to enhance the safety of urban road stormwater reuse. - Highlights: • PAHs build-up on road surfaces varies with traffic and land use conditions. • RDS characteristics and PAH composition were considered in ecological risk assessment. • ΣPAH concentration attached to RDS cannot represent their overall ecological risk. • Higher percentage of 5–6 rings PAHs can pose higher ecological risk. • TC exerts more important influences on 5–6 rings PAHs build-up compared with TV.

Polycyclic aromatic hydrocarbons associated with road deposited solid and their ecological risk: Implications for road stormwater reuse

Energy Technology Data Exchange (ETDEWEB)

Liu, Liang [Graduate school at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Liu, An [College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060 (China); Li, Yang; Zhang, Lixun; Zhang, Guijuan [Graduate school at Shenzhen, Tsinghua University, Shenzhen 518055 (China); State Environmental Protection Key Laboratory of Microorganism Application and Risk Control (MARC), Tsinghua University, Shenzhen 518055, Guangdong (China); Guan, Yuntao, E-mail: guanyt@tsinghua.edu.cn [Graduate school at Shenzhen, Tsinghua University, Shenzhen 518055 (China); State Environmental Protection Key Laboratory of Microorganism Application and Risk Control (MARC), Tsinghua University, Shenzhen 518055, Guangdong (China)

2016-09-01

Reusing stormwater is becoming popular worldwide. However, urban road stormwater commonly contains toxic pollutants, such as polycyclic aromatic hydrocarbons (PAHs), which could undermine reuse safety. This study investigated pollution level of PAHs and their composition build-up on urban roads in a typical megacity in South China. The potential ecological risk posed by PAHs associated with road deposited solid (RDS) was also assessed. Results showed that ecological risk levels varied based on different land use types, which could be significantly influenced by the composition of PAHs and characteristics of RDS. A higher percentage of high-ring PAHs, such as more than four rings, could pose higher ecological risk and are more likely to undermine stormwater reuse safety. Additionally, the degree of traffic congestion rather than traffic volume was found to exert a more significant influence on the generation of high-ring PAH generation. Therefore, stormwater from more congested roads might need proper treatment (particularly for removing high-ring PAHs) before reuse or could be suitable for purposes requiring low-water-quality. The findings of this study are expected to contribute to adequate stormwater reuse strategy development and to enhance the safety of urban road stormwater reuse. - Highlights: • PAHs build-up on road surfaces varies with traffic and land use conditions. • RDS characteristics and PAH composition were considered in ecological risk assessment. • ΣPAH concentration attached to RDS cannot represent their overall ecological risk. • Higher percentage of 5–6 rings PAHs can pose higher ecological risk. • TC exerts more important influences on 5–6 rings PAHs build-up compared with TV.

Construction of road network vulnerability evaluation index based on general travel cost

Science.gov (United States)

Leng, Jun-qiang; Zhai, Jing; Li, Qian-wen; Zhao, Lin

2018-03-01

With the development of China's economy and the continuous improvement of her urban road network, the vulnerability of the urban road network has attracted increasing attention. Based on general travel cost, this work constructs the vulnerability evaluation index for the urban road network, and evaluates the vulnerability of the urban road network from the perspective of user generalised travel cost. Firstly, the generalised travel cost model is constructed based on vehicle cost, travel time, and traveller comfort. Then, the network efficiency index is selected as an evaluation index of vulnerability: the network efficiency index is composed of the traffic volume and the generalised travel cost, which are obtained from the equilibrium state of the network. In addition, the research analyses the influence of traffic capacity decrease, road section attribute value, and location of road section, on vulnerability. Finally, the vulnerability index is used to analyse the local area network of Harbin and verify its applicability.

Understanding fatal older road user crash circumstances and risk factors.

Science.gov (United States)

Koppel, Sjaan; Bugeja, Lyndal; Smith, Daisy; Lamb, Ashne; Dwyer, Jeremy; Fitzharris, Michael; Newstead, Stuart; D'Elia, Angelo; Charlton, Judith

2018-02-28

This study used medicolegal data to investigate fatal older road user (ORU) crash circumstances and risk factors relating to four key components of the Safe System approach (e.g., roads and roadsides, vehicles, road users, and speeds) to identify areas of priority for targeted prevention activity. The Coroners Court of Victoria's Surveillance Database was searched to identify coronial records with at least one deceased ORU in the state of Victoria, Australia, for 2013-2014. Information relating to the ORU, crash characteristics and circumstances, and risk factors was extracted and analyzed. The average rate of fatal ORU crashes per 100,000 population was 8.1 (95% confidence interval [CI] 6.0-10.2), which was more than double the average rate of fatal middle-aged road user crashes (3.6, 95% CI 2.5-4.6). There was a significant relationship between age group and deceased road user type (χ 2 (15, N = 226) = 3.56, p road" (87.0%), on roads that were paved (94.2%), dry (74.2%), and had light traffic volume (38.3%). Road user error was identified by the police and/or coroner for the majority of fatal ORU crashes (57.9%), with a significant proportion of deceased ORU deemed to have "misjudged" (40.9%) or "failed to yield" (37.9%). Road user error was the most significant risk factor identified in fatal ORU crashes, which suggests that there is a limited capacity of the Victorian road system to fully accommodate road user errors. Initiatives related to safer roads and roadsides, vehicles, and speed zones, as well as behavioral approaches, are key areas of priority for targeted activity to prevent fatal older road user crashes in the future.

Increase of urban lake salinity by road deicing salt

International Nuclear Information System (INIS)

Novotny, Eric V.; Murphy, Dan; Stefan, Heinz G.

2008-01-01

Over 317,000 tonnes of road salt (NaCl) are applied annually for road deicing in the Twin Cities Metropolitan Area (TCMA) of Minnesota. Although road salt is applied to increase driving safety, this practice influences environmental water quality. Thirteen lakes in the TCMA were studied over 46 months to determine if and how they respond to the seasonal applications of road salt. Sodium and chloride concentrations in these lakes were 10 and 25 times higher, respectively, than in other non-urban lakes in the region. Seasonal salinity/chloride cycles in the lakes were correlated with road salt applications: High concentrations in the winter and spring, especially near the bottom of the lakes, were followed by lower concentrations in the summer and fall due to flushing of the lakes by rainfall runoff. The seasonal salt storage/flushing rates for individual lakes were derived from volume-weighted average chloride concentration time series. The rate ranged from 9 to 55% of a lake's minimum salt content. In some of the lakes studied salt concentrations were high enough to stop spring turnover preventing oxygen from reaching the benthic sediments. Concentrations above the sediments were also high enough to induce convective mixing of the saline water into the sediment pore water. A regional analysis of historical water quality records of 38 lakes in the TCMA showed increases in lake salinity from 1984 to 2005 that were highly correlated with the amount of rock salt purchased by the State of Minnesota. Chloride concentrations in individual lakes were positively correlated with the percent of impervious surfaces in the watershed and inversely with lake volume. Taken together, the results show a continuing degradation of the water quality of urban lakes due to application of NaCl in their watersheds

Methods for investigating the relationship between accidents, road user behaviour and road design standards. Annex III to SWOV-report `Safety effects of road design standards', R-94-7 (see C 2838 (IRRD 866221).

NARCIS (Netherlands)

Maycock, G. & Summersgill, I.

1995-01-01

This volume is one of the annexes to a main report on safety effects of road design standards which was compiled by SWOV in collaboration with other European partners, in 1993-1994. For the covering abstract of the report or the report itself, see C 2838. This annex summarises the alternative

Towards the Mainstreaming of an Approach to Include Social Benefits Within Road Appraisal : A Case Study from Uganda

OpenAIRE

Odoki, Jennaro B.; Ahmed, Farhad; Taylor, Gary; Okello, Sunday A.

2008-01-01

Developing countries dedicate a considerable share of total infrastructure investment to roads. The adoption in 2000 of the Millennium Development Goals and an increasing emphasis on justifying road investments in terms of their contribution to poverty reduction have directed considerable attention to low volume rural roads. Often the poorest of the poor live in remote rural areas and impr...

Automatic Road Centerline Extraction from Imagery Using Road GPS Data

Directory of Open Access Journals (Sweden)

Chuqing Cao

2014-09-01

Full Text Available Road centerline extraction from imagery constitutes a key element in numerous geospatial applications, which has been addressed through a variety of approaches. However, most of the existing methods are not capable of dealing with challenges such as different road shapes, complex scenes, and variable resolutions. This paper presents a novel method for road centerline extraction from imagery in a fully automatic approach that addresses the aforementioned challenges by exploiting road GPS data. The proposed method combines road color feature with road GPS data to detect road centerline seed points. After global alignment of road GPS data, a novel road centerline extraction algorithm is developed to extract each individual road centerline in local regions. Through road connection, road centerline network is generated as the final output. Extensive experiments demonstrate that our proposed method can rapidly and accurately extract road centerline from remotely sensed imagery.

Identification of Hazardous Road Locations on the basis of jerks

DEFF Research Database (Denmark)

Agerholm, Niels; Jensen, Robin; Andersen, Camilla Sloth

The dark figures for the Danish traffic safety have increased for decades and are now around 91%. As the Hazardous Road Location (HRL) identification, a cornerstone in the traffic safety work, is based on the registered accidents, the identification is increasingly more random and uncertain...... on data from three months of driving by 380 cars, which is equivalent to a distance of 1.9 million km. This indicates that concentrations of decelerations are located where there are high traffic volumes, but not that the design and furniture of the road on the location can explain an HRL. This also...... indicates that concentrations of jerks can be found where the road has safety problems or is inappropriately designed. This is supported by literature dealing with this topic. On the other hand, jerks are very sensitive to unevenness in the road surface, and data from these locations must be removed...

Development of Pavement Maintenance Management System (PMMS of Urban Road Network Using HDM-4 Model

Directory of Open Access Journals (Sweden)

Tanuj Chopra

2017-04-01

Full Text Available The aim of the study is to develop Pavement Maintenance Management System (PMMS for four road sections of urban road network (Patiala, Punjab, India using Highway Development and Management (HDM-4 model. The HDM-4 provides a deterministic approach in data input and process data of existing road condition, traffic volume and pavement composition to predict road deterioration as per the urban road conditions in terms of International Roughness Index (IRI value. This study presents the use of HDM-4 model for the computation of optimum Maintenance and Rehabilitation (M&R strategy for each road section and comparative study of scheduled and condition responsive M&R strategies. The results of present study will be useful for gaining better support for decision-makers for adequate and timely fund allocations for preservation of the urban road network.

Heavy metals in soils along unpaved roads in south west Cameroon: Contamination levels and health risks.

Science.gov (United States)

Ngole-Jeme, Veronica M

2016-04-01

Soils enriched with heavy metals from vehicular emission present a significant exposure route of heavy metals to individuals using unpaved roads. This study assessed the extent of Cd, Cr, Co, Cu, Ni, Pb and Zn contamination of soils along unpaved roads in Cameroon, and the health risks presented by incidental ingestion and dermal contact with the soils using metal contamination factor (CF) pollution load index, hazard quotients (HQ) and chronic hazard index (CHI). CF values obtained (0.9-12.2) indicate moderate to high contamination levels. HQ values for Cr, Cd and Pb exceeded the reference doses. Moderate health hazard exists for road users in the areas with intense anthropogenic activities and high average daily traffic (ADT) volume according to CHI values (1-4) obtained. The economy and quality of life in cities with unpaved roads could be threatened by health challenges resulting from long-term exposure to heavy metal derived from high ADT volumes.

Pollutant concentrations in road runoff: Southeast Queensland case study

Energy Technology Data Exchange (ETDEWEB)

Drapper, D.; Tomlinson, R.; Williams, P.

2000-04-01

This paper discusses the results of research into the pollutants in runoff from road pavement surfaces following natural rainfall events. Road runoff water quality was monitored at 21 sites centering around Brisbane, in southeast Queensland, Australia. The sites were selected according to traffic volumes, surrounding land use, pavement surface type, ease of access, and commercial vehicle percentage. Bridge sites were chosen for convenience of sample collection and minimized infrastructure modification. First flush grab samplers were permanently installed at each site to collect the first 20 L of runoff from one of the bridge drainage scuppers. The runoff samples were tested for a number of heavy metals, hydrocarbons, pesticides, and other physical characteristics. The observed results fall within the ranges of concentrations reported internationally and nationally but do not typically follow the 30,000 average annual daily traffic results reported in the United States. Traffic volumes have not been found to be the best indicator of road runoff pollutant concentrations. Interevent duration has been found to be a statistically significant factor for pollutant concentrations. Sites incorporating exit lanes have recorded higher concentrations of acid-extractable copper and zinc, tending to support the hypothesis that brake pad and tire wear caused by rapid deceleration contributes to the concentrations of these metals in road runoff. Laser particle sizing has shown that a significant proportion of the sediment found in the runoff is <100 {micro}m. However, these particulates do settle in water within 24 h, under laboratory conditions. This may be due to the presence of heavy metals.

Differential Effects of Roads and Traffic on Space Use and Movements of Native Forest-Dependent and Introduced Edge-Tolerant Species.

Directory of Open Access Journals (Sweden)

Hsiang Ling Chen

Full Text Available Anthropogenic infrastructure such as roads and non-native species are major causes of species endangerment. Understanding animal behavioral responses to roads and traffic provides insight into causes and mechanisms of effects of linear development on wildlife and aids effective mitigation and conservation. We investigated effects of roads and traffic on space use and movements of two forest-dwelling species: endemic, forest-dependent Mount Graham red squirrels (Tamiasciurus hudsonicus grahamensis and introduced, edge-tolerant Abert's squirrels (Sciurus aberti. To assess the effects of roads on space use and movement patterns, we compared the probability that a squirrel home range included roads and random lines in forests, and assessed effects of traffic intensity on rate of road crossing and movement patterns. Red squirrels avoided areas adjacent to roads and rarely crossed roads. In contrast, Abert's squirrels were more likely to include roads in their home ranges compared to random lines in forests. Both red squirrels and Abert's squirrels increased speed when crossing roads, compared to before and after road crossings. Increased hourly traffic volume reduced the rate of road crossings by both species. Behavioral responses of red squirrels to roads and traffic resemble responses to elevated predation risk, including reduced speed near roads and increased tortuosity of movement paths with increased traffic volume. In contrast, Abert's squirrels appeared little affected by roads and traffic with tortuosity of movement paths reduced as distance to roads decreased. We found that species with similar body size category (<1 kg but different habitat preference and foraging strategy responded to roads differently and demonstrated that behavior and ecology are important when considering effects of roads on wildlife. Our results indicate that roads restricted movements and space use of a native forest-dependent species while creating habitat preferred

Differential Effects of Roads and Traffic on Space Use and Movements of Native Forest-Dependent and Introduced Edge-Tolerant Species.

Science.gov (United States)

Chen, Hsiang Ling; Koprowski, John L

2016-01-01

Anthropogenic infrastructure such as roads and non-native species are major causes of species endangerment. Understanding animal behavioral responses to roads and traffic provides insight into causes and mechanisms of effects of linear development on wildlife and aids effective mitigation and conservation. We investigated effects of roads and traffic on space use and movements of two forest-dwelling species: endemic, forest-dependent Mount Graham red squirrels (Tamiasciurus hudsonicus grahamensis) and introduced, edge-tolerant Abert's squirrels (Sciurus aberti). To assess the effects of roads on space use and movement patterns, we compared the probability that a squirrel home range included roads and random lines in forests, and assessed effects of traffic intensity on rate of road crossing and movement patterns. Red squirrels avoided areas adjacent to roads and rarely crossed roads. In contrast, Abert's squirrels were more likely to include roads in their home ranges compared to random lines in forests. Both red squirrels and Abert's squirrels increased speed when crossing roads, compared to before and after road crossings. Increased hourly traffic volume reduced the rate of road crossings by both species. Behavioral responses of red squirrels to roads and traffic resemble responses to elevated predation risk, including reduced speed near roads and increased tortuosity of movement paths with increased traffic volume. In contrast, Abert's squirrels appeared little affected by roads and traffic with tortuosity of movement paths reduced as distance to roads decreased. We found that species with similar body size category (roads differently and demonstrated that behavior and ecology are important when considering effects of roads on wildlife. Our results indicate that roads restricted movements and space use of a native forest-dependent species while creating habitat preferred by an introduced, edge-tolerant species.

Road user behaviour changes following a self-explaining roads intervention.

Science.gov (United States)

Mackie, Hamish W; Charlton, Samuel G; Baas, Peter H; Villasenor, Pablo C

2013-01-01

The self-explaining roads (SER) approach uses road designs that evoke correct expectations and driving behaviours from road users to create a safe and user-friendly road network. Following the implementation of an SER process and retrofitting of local and collector roads in a suburb within Auckland City, lower speeds on local roads and less variation in speed on both local and collector roads were achieved, along with a closer match between actual and perceived safe speeds. Preliminary analyses of crash data shows that the project has resulted in a 30% reduction crash numbers and an 86% reduction in crash costs per annum, since the road changes were completed. In order to further understand the outcomes from this project, a study was carried out to measure the effects of the SER intervention on the activity and behaviour of all road users. Video was collected over nine separate days, at nine different locations, both before and after SER construction. Road user behaviour categories were developed for all potential road users at different location types and then used to code the video data. Following SER construction, on local roads there was a relatively higher proportion of pedestrians, less uniformity in vehicle lane keeping and less indicating by motorists along with less through traffic, reflecting a more informal/low speed local road environment. Pedestrians were less constrained on local roads following SER construction, possibly reflecting a perceptually safer and more user-friendly environment. These behaviours were not generally evident on collector roads, a trend also shown by the previous study of speed changes. Given that one of the objectives of SER is to match road user behaviour with functionally different road categories, the road user behaviour differences demonstrated on different road types within the SER trial area provides further reinforcement of a successful SER trial. Copyright © 2012 Elsevier Ltd. All rights reserved.

Verification of road databases using multiple road models

Science.gov (United States)

Ziems, Marcel; Rottensteiner, Franz; Heipke, Christian

2017-08-01

In this paper a new approach for automatic road database verification based on remote sensing images is presented. In contrast to existing methods, the applicability of the new approach is not restricted to specific road types, context areas or geographic regions. This is achieved by combining several state-of-the-art road detection and road verification approaches that work well under different circumstances. Each one serves as an independent module representing a unique road model and a specific processing strategy. All modules provide independent solutions for the verification problem of each road object stored in the database in form of two probability distributions, the first one for the state of a database object (correct or incorrect), and a second one for the state of the underlying road model (applicable or not applicable). In accordance with the Dempster-Shafer Theory, both distributions are mapped to a new state space comprising the classes correct, incorrect and unknown. Statistical reasoning is applied to obtain the optimal state of a road object. A comparison with state-of-the-art road detection approaches using benchmark datasets shows that in general the proposed approach provides results with larger completeness. Additional experiments reveal that based on the proposed method a highly reliable semi-automatic approach for road data base verification can be designed.

Econometric models of road use, accidents, and road investment decisions. Volume 2 : an econometric model of car ownership, road use, accidents, and their severity (Essay 3)

Science.gov (United States)

1999-11-01

Using a fairly large cross-section/time-series data base, covering all provinces of Norway and all months between January 1973 and December 1994, we estimate non-linear (Box-Cox) regression equations explaining aggregate car ownership, road use, seat...

Strabo's roads

DEFF Research Database (Denmark)

Bekker-Nielsen, Tønnes

2017-01-01

in the Geography, and the world-view, of Strabo. Strabo did not take much interest in roads as artefacts or monuments, in the technology of road construction, or in the mythological and historical background of individual roads. He is primarily interested in roads from a functional point of view. For the general......To ancient geographers, roads were important not only as arteries of communication, but also as sources of information, since mileages measured along the Roman highways were among the very few precise distances available to the ancient geographer. This chapter explores the place of roads...... or the statesman, roads provide routes of communication; for the systematic geographer, they provide measured distances and directions. Through case studies of Spain, Gaul, Italy, Greece and Anatolia, this chapter attempts to reach a better understanding of the place of roads in Strabo’s universe, especially two...

Road profile estimation of city roads using DTPS

Science.gov (United States)

Wang, Qi; McDaniel, J. Gregory; Sun, Nian X.; Wang, Ming L.

2013-04-01

This work presents a non-destructive and non-contact acoustic sensing approach for measuring road profile of road and bridge deck with vehicles running at normal speed without stopping traffic. This approach uses an instantaneous and real-time dynamic tire pressure sensor (DTPS) that can measure dynamic response of the tire-road interaction and increases the efficiency of currently used road profile measuring systems with vehicle body-mounted profilers and axle-mounted accelerometers. In this work, a prototype of real-time DTPS system has been developed and demonstrated on a testing van at speeds from 5 to 80 miles per hour (mph). A data analysis algorithm has been developed to remove axle dynamic motions from the measured DTPS data and to find the transfer function between dynamic tire pressure change and the road profile. Field test has been performed to estimate road profiles. The road profile resolution is approximately 5 to 10 cm in width and sensitivity is 0. 3 cm for the height road surface features at driving speeds of 5 to 80 mph.

Degradation of natural habitats by roads: Comparing land-take and noise effect zone

International Nuclear Information System (INIS)

Madadi, Hossein; Moradi, Hossein; Soffianian, Alireza; Salmanmahiny, Abdolrassoul; Senn, Josef; Geneletti, Davide

2017-01-01

Roads may act as barriers, negatively influencing the movement of animals, thereby causing disruption in landscapes. Roads cause habitat loss and fragmentation not only through their physical occupation, but also through traffic noise. The aim of this study is to provide a method to quantify the habitat degradation including habitat loss and fragmentation due to road traffic noise and to compare it with those of road land-take. Two types of fragmentation effects are determined: structural fragmentation (based on road land-take only), and functional fragmentation (noise effect zone fragmentation, buffer using a threshold of 40 dB). Noise propagation for roads with a traffic volume of more than 1000 vehicles per day was simulated by Calculation of Road Traffic Noise (CRTN) model. Habitat loss and fragmentation through land-take and noise effect zone were calculated and compared in Zagros Mountains in western Iran. The study area is characterized by three main habitat types (oak forest, scattered woodland and temperate grassland) which host endangered and protected wildlife species. Due to topographic conditions, land cover type, and the traffic volume in the region, the noise effect zone ranged from 50 to 2000 m which covers 18.3% (i.e. 516,929.95 ha) of the total study area. The results showed that the habitat loss due to noise effect zone is dramatically higher than that due to road land-take only (35% versus 1.04% of the total area). Temperate grasslands lost the highest proportion of the original area by both land-take and noise effect zone, but most area was lost in scattered woodland as compared to the other two habitat types. The results showed that considering the noise effect zone for habitat fragmentation resulted in an increase of 25.8% of the area affected (316,810 ha) as compared to using the land-take only (555,874 ha vs. 239,064 ha, respectively). The results revealed that the degree of habitat fragmentation is increasing by considering the noise

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

Spatial patterns monitoring of road traffic injuries in Karachi metropolis.

Science.gov (United States)

Lateef, Muhammad U

2011-06-01

This article aims to assess the pattern of road traffic injuries (RTIs) and fatalities in Karachi metropolis. Assessing the pattern of RTIs in Karachi at this juncture is important for many reasons. The rapid motorisation in the recent years due to the availability of credit has significantly increased the traffic volume of the city. Since then, the roads of Karachi have continuously developed at a rapid pace. This development has come with a high human loss, because the construction of multilevel flyovers, signal-free corridors and the resulting high-speed traffic ultimately increase the severity of injuries. The reasons for this high proportion are inadequate infrastructure, poor enforcement of safety regulations, high crash severity index and greater population of vulnerable road user groups (riders and pedestrians). This research is the first of its kind in the country to have a geocoded database of fatalities and injuries in a geographical information system for the entire city of Karachi. In fact, road crashes are both predictable and preventable. Developing countries should learn from the experience of highly motorised nations to avoid the high burden of RTIs by adopting road safety and prevention measures.

Microbiota cloacal aeróbia de cracídeos cativos no Rio Grande do Sul e sua susceptibilidade a antimicrobianos Cloacal microbiota identification and evaluation of the antimicrobial resistance in captive cracids from Rio Grande do Sul, Brazil

Directory of Open Access Journals (Sweden)

Helton Fernandes Santos

2010-12-01

Full Text Available Os cracídeos são aves silvestres que habitam as matas tropicais da América. Foram coletadas, no ano de 2007, amostras cloacais de 51 aves de dez espécies diferentes de cracídeos mantidos em cativeiros no Estado do Rio Grande do Sul. A partir dos swabs, colhidos assepticamente, foi realizado o isolamento e a caracterização bacteriana e o teste de susceptibilidade antimicrobiana dos isolados. Foram identificadas 93 cepas de bactérias. As bactérias mais frequentemente isoladas foram Escherichia coli, Staphylococcus spp. e Streptococcus spp. Todas as amostras foram negativas para o isolamento de Salmonella spp. O resultado do teste de sensibilidade mostrou que dentre as 93 cepas isoladas, todas foram sensíveis apenas ao imipinem. Adicionalmente, os menores percentuais de resistência foram observados frente ao cloranfenicol e ciprofloxacina. Os gêneros e espécies bacterianas com maior percentual de resistência a diferentes antibióticos testados foram Escherichia coli, Serratia marcescens, Staphylococcus aureus e Streptococcus spp. Com os resultados obtidos no presente trabalho, concluí-se, que a população de cracídeos estudada apresenta sua microbiota cloacal composta por vários gêneros e espécies bacterianas e que a multirresistencia pode ser um problema no futuro, uma vez que algumas cepas isoladas mostraram percentuais elevados de resistência a diferente antimicrobianos.Cracids are wildlife Galliformes which inhabits the America's tropical forests. Fifty one cloacal swabs were collected from 10 different species of captive cracids from the Rio Grande do Sul State during 2007. The cloacal swab samples were submitted to bacterial isolation, identification and, subsequently; antimicrobial susceptibility testing. Ninety three bacterial isolates were obtained from the cracid population examined. The most prevalent among the isolates were Escherichia coli, and bacteria from the Staphylococcus and Streptococcus genera. All samples

Towards successful SPP treatment of local materials for road building

CSIR Research Space (South Africa)

Paige-Green, P

2009-06-17

Full Text Available This report discusses the use of certain proprietary soil stabilisers in low volume roads in South Africa. Although ionic soil stabilisers have been in use for many years, they have not been marketed to their fullest potential and in many cases have...

Distributed road assessment system

Science.gov (United States)

Beer, N. Reginald; Paglieroni, David W

2014-03-25

A system that detects damage on or below the surface of a paved structure or pavement is provided. A distributed road assessment system includes road assessment pods and a road assessment server. Each road assessment pod includes a ground-penetrating radar antenna array and a detection system that detects road damage from the return signals as the vehicle on which the pod is mounted travels down a road. Each road assessment pod transmits to the road assessment server occurrence information describing each occurrence of road damage that is newly detected on a current scan of a road. The road assessment server maintains a road damage database of occurrence information describing the previously detected occurrences of road damage. After the road assessment server receives occurrence information for newly detected occurrences of road damage for a portion of a road, the road assessment server determines which newly detected occurrences correspond to which previously detected occurrences of road damage.

Prioritizing Road Treatments using the Geomorphic Roads Analysis and Inventory Package (GRAIP) to Improve Watershed Conditions in the Wall Creek Watershed, Oregon

Science.gov (United States)

Day, K. T.; Black, T.; Clifton, C.; Luce, C.; McCune, S.; Nelson, N.

2010-12-01

Wall Creek, tributary to the North Fork John Day River in eastern Oregon, was identified as a priority watershed by the Umatilla National Forest for restoration in 2002. Most streams in this 518 km2 multi-ownership watershed are designated critical habitat for threatened steelhead. Eight streams are listed on the Oregon 303(d) list for elevated temperatures and excess sedimentation. Over 1000 km of public and private roads in the watershed present a major source of potential water quality and habitat impairment. We conducted a watershed-wide inventory of roads using the Geomorphic Roads Analysis and Inventory Package (GRAIP) in 2009 to quantify sediment contributions from roads to streams. GRAIP is a field and GIS-based model developed by the Forest Service Rocky Mountain Research Station and Utah State University that georeferences and quantifies road hydrologic connectivity, sediment production and delivery, mass wasting, and risk of diversion and plugging at stream crossings. Field survey and modeling produced data for 6,473 drainage locations on 726 km of road (most of the publically owned roads) quantifying the location and mass of sediment produced and delivered to streams. Findings indicate a relatively small subset of roads deliver the majority of road-produced fine sediment; 12 percent of the road length delivers 90 percent of the total fine sediment to streams. Overall fine sediment production in the watershed is relatively low (with an estimated background erosion rate of 518,000 kg/yr for the watershed) and sediment produced and delivered from the road system appears to be a modest addition. Road surfaces produce approximately 81,455 kg of fine sediment per year, with 20,976 kg/year delivered to the stream network. Fifty-nine gullies were observed, 41 of which received road runoff. Sixteen road-related landslides were also observed. The excavated volume of these features totals 3,922,000 kg which is equivalent to 175 years of fine sediment delivery at

AN INVESTIGATION ON THE FOREST ROAD PLANNING AND ROAD GROUND

Directory of Open Access Journals (Sweden)

Hafız Hulusi ACAR

2001-01-01

Full Text Available It is required that the capital used for construction of road must be technical, economical and used in its location. For this reason, the projects must be prepared for forest roads and all operations belong to roads must be guided according to these projects. In this investigation, available forest road network plan and constructed forest roads were investigated at the point of view technical and forest transportation. After this, it were studied to reach the highest exploitation rate as can as possible. Available forest road density were found as 11.9 m/ha in forest areas for Yesiltepe District. In this condition, exploitation rate was 78 %. After that, optimum forest road network were planned and road density were reached to 22 m/ha and exploitation rate to 86 %. Directed sample method were used from taking soil sample methods and samples were took in mixed system. According to results of the experiments, available forest roads were found in a good degree at the point of view endurance, pressing and transportation capacity. With these results, it is aimed to reach higher exploitation rate with given attention to landslide areas during planning of forest roads on the mountain areas such as Black Sea Region. For this reason, required importance must be given to planning of truck and logging roads. Ground analysis must be done and took care before during planning process of forest road network.

Miscellaneous Roads

Data.gov (United States)

Minnesota Department of Natural Resources — This data set contains roadway centerlines for miscellanous roads, a catch-all category for all road types not present in the other DNR derived products. These road...

Safety effects of low-cost engineering measures. An observational study in a Portuguese multilane road.

Science.gov (United States)

Vieira Gomes, Sandra; Cardoso, João Lourenço

2012-09-01

Single carriageway multilane roads are not, in general, a very safe type of road, mainly because of the high number of seriously injured victims in head-on collisions, when compared with dual carriageway multilane roads, with a median barrier. In this paper the results of a study on the effect of the application of several low cost engineering measures, aimed at road infrastructure correction and road safety improvement on a multilane road (EN6), are presented. The study was developed by the National Laboratory of Civil Engineering (LNEC) for the Portuguese Road Administration and involved a comparison of selected aspects of motorized traffic behaviour (traffic volumes and speeds) measured in several sections of EN6, as well as monitoring of road safety developments in the same road. The applied low cost engineering measures allowed a reduction of 10% in the expected annual number of personal injury accidents and a 70% decrease in the expected annual number of head-on collisions; the expected annual frequency of accidents involving killed and seriously injured persons was reduced by 26%. Copyright © 2012 Elsevier Ltd. All rights reserved.

Invasive Brown Treesnake movements at road edges indicate road-crossing avoidance

Science.gov (United States)

Siers, Shane R.; Savidge, Julie S; Reed, Robert N.

2014-01-01

Roads have significant impacts on the dispersal of wildlife. Although this poses a threat to the abundance and diversity of desirable flora and fauna, it also affords some opportunity for enhancing control of invasive species. Roads are the most common terrain features that may affect the rate of landscape-scale movements of invasive Brown Treesnakes (Boiga irregularis) throughout Guam. We radio tracked 45 free-ranging Brown Treesnakes in close proximity to two roads in Guam and recorded instances where daily relocations of snakes spanned roads. Then we reconstructed observed movement histories with randomized turning angles, which served as a useful null hypothesis for assessing the effect of roads or road edge habitat on Brown Treesnake movement patterns. Random walk simulations demonstrated that Brown Treesnakes crossed these roads at a rate far lower than would be expected if snake movement was random with respect to roads and road edge habitat. We discuss two alternative hypotheses for these results: 1) habitat gaps posed by roads physically or behaviorally restrict snake movement; or 2) road edges provide preferred foraging habitat from which snakes are reluctant to depart. Because roads often form the boundaries of jurisdictional and management units, the effects of roads on the movement of invasive Brown Treesnakes will influence the prospects for success of future landscape-level suppression efforts.

Characterizing heavy metal build-up on urban road surfaces: Implication for stormwater reuse

International Nuclear Information System (INIS)

Liu, An; Liu, Liang; Li, Dunzhu; Guan, Yuntao

2015-01-01

Stormwater reuse is increasingly popular in the worldwide. In terms of urban road stormwater, it commonly contains toxic pollutants such as heavy metals, which could undermine the reuse safety. The research study investigated heavy metal build-up characteristics on urban roads in a typical megacity of South China. The research outcomes show the high variability in heavy metal build-up loads among different urban road sites. The degree of traffic congestion and road surface roughness was found to exert a more significant influence on heavy metal build-up rather than traffic volume. Due to relatively higher heavy metal loads, stormwater from roads with more congested traffic conditions or rougher surfaces might be suitable for low-water-quality required activities while the stormwater from by-pass road sections could be appropriate for relatively high-water-quality required purposes since the stormwater could be relatively less polluted. Based on the research outcomes, a decision-making process for heavy metals based urban road stormwater reuse was proposed. The new finding highlights the importance to undertaking a “fit-for-purpose” road stormwater reuse strategy. Additionally, the research results can also contribute to enhancing stormwater reuse safety. - Highlights: • Heavy metal (HM) build-up varies with traffic and road surface conditions. • Traffic congestion and surface roughness exert a higher impact on HM build-up. • A “fit-for-purpose” strategy could suit urban road stormwater reuse

Characterizing heavy metal build-up on urban road surfaces: Implication for stormwater reuse

Energy Technology Data Exchange (ETDEWEB)

Liu, An [Research Centre of Environmental Engineering and Management, Graduate School at Shenzhen, Tsinghua University, 518055 Shenzhen (China); Cooperative Research and Education Centre for Environmental Technology, Kyoto University–Tsinghua University, 518055 Shenzhen (China); Liu, Liang; Li, Dunzhu [Research Centre of Environmental Engineering and Management, Graduate School at Shenzhen, Tsinghua University, 518055 Shenzhen (China); Guan, Yuntao, E-mail: guanyt@tsinghua.edu.cn [Research Centre of Environmental Engineering and Management, Graduate School at Shenzhen, Tsinghua University, 518055 Shenzhen (China); School of Environment, Tsinghua University, Beijing 100084 (China)

2015-05-15

Stormwater reuse is increasingly popular in the worldwide. In terms of urban road stormwater, it commonly contains toxic pollutants such as heavy metals, which could undermine the reuse safety. The research study investigated heavy metal build-up characteristics on urban roads in a typical megacity of South China. The research outcomes show the high variability in heavy metal build-up loads among different urban road sites. The degree of traffic congestion and road surface roughness was found to exert a more significant influence on heavy metal build-up rather than traffic volume. Due to relatively higher heavy metal loads, stormwater from roads with more congested traffic conditions or rougher surfaces might be suitable for low-water-quality required activities while the stormwater from by-pass road sections could be appropriate for relatively high-water-quality required purposes since the stormwater could be relatively less polluted. Based on the research outcomes, a decision-making process for heavy metals based urban road stormwater reuse was proposed. The new finding highlights the importance to undertaking a “fit-for-purpose” road stormwater reuse strategy. Additionally, the research results can also contribute to enhancing stormwater reuse safety. - Highlights: • Heavy metal (HM) build-up varies with traffic and road surface conditions. • Traffic congestion and surface roughness exert a higher impact on HM build-up. • A “fit-for-purpose” strategy could suit urban road stormwater reuse.

Evaluation and modelling of haul road dust palliatives

Energy Technology Data Exchange (ETDEWEB)

Thompson, R.J.; Visser, A.T.

2000-07-01

Excessive dust generation from mine haul roads is a problem common to most surface coal mining operations. Optimal warning course material selection parameters reduce, but do not totally eliminate the potential to produce dust. For existing operations, which may not have optimally designed and maintained roads, the problem of identifying existing deficiencies, quantifying their impact and assigning priorities within the constraints of limited capital and manpower is problematic. This is reflected in the fact that most surface mine operators agree dust-free roads are desirable, but find it difficult to translate this into cost-effective betterment activities. This paper describes a dust palliative evaluation, management and costing strategy. Models are described which enable mines to assess the likely dustiness of their chosen wearing course materials as a function of surface loading of fines, traffic types and volume, together with various material parameters. These models are then combined with palliative suppression performance models to enable predictions to be made concerning the suppression- and cost-efficiency of various dust palliation options. 13 refs., 5 figs., 4 tabs.

MELCOR Accident Consequence Code System (MACCS)

International Nuclear Information System (INIS)

Rollstin, J.A.; Chanin, D.I.; Jow, H.N.

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projections, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management

MELCOR Accident Consequence Code System (MACCS)

Energy Technology Data Exchange (ETDEWEB)

Jow, H.N.; Sprung, J.L.; Ritchie, L.T. (Sandia National Labs., Albuquerque, NM (USA)); Rollstin, J.A. (GRAM, Inc., Albuquerque, NM (USA)); Chanin, D.I. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA))

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management. 59 refs., 14 figs., 15 tabs.

MELCOR Accident Consequence Code System (MACCS)

International Nuclear Information System (INIS)

Jow, H.N.; Sprung, J.L.; Ritchie, L.T.; Rollstin, J.A.; Chanin, D.I.

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management. 59 refs., 14 figs., 15 tabs

Road Service Performance Based On Integrated Road Design Consistency (IC) Along Federal Road F0023

OpenAIRE

Zainal Zaffan Farhana; Prasetijo Joewono; Musa Wan Zahidah

2017-01-01

Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric design...

Predictability by recognizable road design. [previously called: Recognizable road design.

NARCIS (Netherlands)

2007-01-01

One of the Sustainable Safety principles is that a road should have a recognizable design and a predictable alignment. If this is the case, road users know how they are expected to behave and what they can expect from other road users, so that crashes may be prevented. For roads to be recognizable,

User guide for the Air Force Base Automotive Transportation Simulation Model - BATS. Volume 2. Documentation. Final report Jun 78-Sep 79

Energy Technology Data Exchange (ETDEWEB)

Sandys, R.

1979-09-01

The Base Automotive Transportation Simulation (BATS) Model is a transportation planning and traffic flow model designed to simulate traffic volumes and flows on an air base. The principal model inputs are a road network, land use zones, demographic varibles, and gate counts. The land use zones and demographic variables are used to assign volumes to the road network, and these volumes are calibrated using the gate counts. The flow characteristics on each road in the network are simulated using the volumes assigned. Average speed and volumes are the results of the model and these may be directly input to the Air Quality Assessment Model (AQAM) to estimate pollutant emissions and dispersion from traffic sources. A volume flow plot of the network is an optional output of the model.

Road analysis: a tool for cost-effective rehabilitation measures for Finnish roads

Science.gov (United States)

Roimela, Petri; Salmenkaita, Seppo; Maijala, Pekka; Saarenketo, Timo

2000-04-01

Public funding for road network maintenance has decreased 30% during the last few years in Finland. Reduced resources, together with the current rehabilitation strategies, will in the long term result in increasing deterioration of the Finnish road network. For this reason road rehabilitation funding should be focused more specifically on those roads and road sections requiring measures and these measures should be optimized to ensure that only the specific problem structure will be repaired. Roadscanners Oy, in cooperation with the Finnish National Road Administration (Finnra), has developed a new and effective Road Analysis technique to survey the condition of roads and road networks. Road Analysis is based on the integrated analysis of the measured data collected from the road under survey. The basic survey methods used in Road Analysis include Ground Penetrating Data (GPR), falling weight deflectometer (FWD), roughness and rutting measurements, pavement distress mapping and GPS-positioning, as well as reference drilling based on preliminary GPR data analysis. The collected road survey data is processed, interpreted, analyzed and classified using Road Doctor software, specifically developed for this purpose. GPR measurements in road analysis are carried out using a 400 MHz ground-coupled antenna and a 1.0 GHz horn antenna. Horn antenna data is used to measure the thickness of the pavement and base course layers, as well as to evaluate their quality based on their dielectric properties. The 400 MHz ground-coupled data is used to estimate the thickness of the pavement structure and embankment. Ground-coupled antenna data is used for subgrade quality estimations and in evaluating the causes of subgrade- related frost defects. GPR data also provides important location information about special structures, such as steel reinforcements, cables and pipelines. Road Analysis includes a classification of the critical elements affecting the lifetime of the road: (1

Road pricing and road safety : possible effects on road safety of 23 variants of road pricing.

NARCIS (Netherlands)

Eenink, R.G. Dijkstra, A. Wijnen, W. & Janssen, S.T.M.C.

2007-01-01

The Nouwen Committee (National Platform Paying Differently for Mobility) advised the Cabinet in 2005 about the introduction of a system of road pricing. Part of this advice consisted of a calculation of the expected road safety effects of such a system. In a letter to the Minister of Transport, SWOV

Road Service Performance Based On Integrated Road Design Consistency (IC Along Federal Road F0023

Directory of Open Access Journals (Sweden)

Zainal Zaffan Farhana

2017-01-01

Full Text Available Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric designs consistency where the drivers make mistakes errors due to the road geometric features causes the accident kept rising in Malaysia. Hence, models are based on operating speed to calculate design consistency of road. The profiles were obtained by continuous speed profile using GPS data. The continuous operating speed profile models were plotted based on operating speed model (85th percentile. The study was conduct at F0023 from km 16 until km 20. The purpose of design consistency is to know the relationship between the operating speed and elements of geometric design on the road. As a result, the integrated design consistency motorcycle and cars along a segment at F0023, the threshold shows poor design quality for motorcycles and cars.

The use of multiplicative models for analysis of road safety data.

NARCIS (Netherlands)

Oppe, S.

1978-01-01

Accident ratios are analysed with regard to the variables road surface skidding resistance and hourly traffic volume. In a first analysis the additive conjoint measurement model (acm) is used to investigate to what extent the accident ratios can be described as a result of independent contributions

Evaluation of Traffic Density Parameters as an Indicator of Vehicle Emission-Related Near-Road Air Pollution: A Case Study with NEXUS Measurement Data on Black Carbon

Science.gov (United States)

An important factor in evaluating health risk of near-road air pollution is to accurately estimate the traffic-related vehicle emission of air pollutants. Inclusion of traffic parameters such as road length/area, distance to roads, and traffic volume/intensity into models such as...

Road safety performance indicators for the interurban road network.

NARCIS (Netherlands)

Yannis, G. Weijermars, W.A.M. Gitelman, V. Vis, M. Chazirisa, A. Papadimitriou, E. & Lima Azevedo, C.

2013-01-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The

How effective is road mitigation at reducing road-kill? A meta-analysis

NARCIS (Netherlands)

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A.G.; Fahrig, Lenore; Findlay, C.S.; Houlahan, Jeff; Ree, van der Rodney; Grift, van der Edgar A.

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners,

Development Of Optimum Maintenance amp Rehabilitation Strategies For Urban Bituminous Concrete Surfaced Roads

Directory of Open Access Journals (Sweden)

Dr Pardeep Kumar Gupta

2015-02-01

Full Text Available ABSTRACT In India the road traffic volume has increased manifolds during the post-independence period. The traffic axle loading may also in many cases be much heavier than the specified limit. As a result of which the existing road network has been subjected to severe deterioration leading to premature failure of the pavements.In such a scenario development of the effective pavement management strategies would furnish useful information to ensure the compatible and cost- effective decisions so as to keep the existing road network intact. The pavement deterioration models can prove to be an effective tool which can assist highway agencies to forecast economic and technical outcome of possible investment decisions regarding maintenance management of pavements. The optimum maintenance and rehabilitation strategies developed in this study would be useful in planning pavement maintenance strategies in a scientific manner and ensuring rational utilization of limited maintenance funds. Once this strategy for urban road network is implemented and made operational this would serve as window to the other urban road network of different regions.

Linking road accident data to other files : an integrated road accident recordkeeping system. Contribution in Proceedings of Seminar P 'Road Safety' held at the 14th PTHC Summer Annual Meeting, University of Sussex, England, from 14-17 July 1986. Volume P 284, p. 55-86.

OpenAIRE

Harris, S.

1986-01-01

The road accident data which the police collect is of great value to road safety research and is used extensively. This data increases greatly in value if it can be linked to other files which contain more detailed information on exposure. Linking road accident data to other files results in what we call an Integrated Road Accident Recordkeeping System in -which the combined value of the linked files is greater than that of the sum of their individual values.

Evaluation of Traffic Density Parameters as an Indicator of Vehicle Emission-Related Near-Road Air Pollution: A Case Study with NEXUS Measurement Data on Black Carbon.

Science.gov (United States)

Liu, Shi V; Chen, Fu-Lin; Xue, Jianping

2017-12-15

An important factor in evaluating health risk of near-road air pollution is to accurately estimate the traffic-related vehicle emission of air pollutants. Inclusion of traffic parameters such as road length/area, distance to roads, and traffic volume/intensity into models such as land use regression (LUR) models has improved exposure estimation. To better understand the relationship between vehicle emissions and near-road air pollution, we evaluated three traffic density-based indices: Major-Road Density (MRD), All-Traffic Density (ATD) and Heavy-Traffic Density (HTD) which represent the proportions of major roads, major road with annual average daily traffic (AADT), and major road with commercial annual average daily traffic (CAADT) in a buffered area, respectively. We evaluated the potential of these indices as vehicle emission-specific near-road air pollutant indicators by analyzing their correlation with black carbon (BC), a marker for mobile source air pollutants, using measurement data obtained from the Near-road Exposures and Effects of Urban Air Pollutants Study (NEXUS). The average BC concentrations during a day showed variations consistent with changes in traffic volume which were classified into high, medium, and low for the morning rush hours, the evening rush hours, and the rest of the day, respectively. The average correlation coefficients between BC concentrations and MRD, ATD, and HTD, were 0.26, 0.18, and 0.48, respectively, as compared with -0.31 and 0.25 for two commonly used traffic indicators: nearest distance to a major road and total length of the major road. HTD, which includes only heavy-duty diesel vehicles in its traffic count, gives statistically significant correlation coefficients for all near-road distances (50, 100, 150, 200, 250, and 300 m) that were analyzed. Generalized linear model (GLM) analyses show that season, traffic volume, HTD, and distance from major roads are highly related to BC measurements. Our analyses indicate that

Evaluation of Traffic Density Parameters as an Indicator of Vehicle Emission-Related Near-Road Air Pollution: A Case Study with NEXUS Measurement Data on Black Carbon

Directory of Open Access Journals (Sweden)

Shi V. Liu

2017-12-01

Full Text Available An important factor in evaluating health risk of near-road air pollution is to accurately estimate the traffic-related vehicle emission of air pollutants. Inclusion of traffic parameters such as road length/area, distance to roads, and traffic volume/intensity into models such as land use regression (LUR models has improved exposure estimation. To better understand the relationship between vehicle emissions and near-road air pollution, we evaluated three traffic density-based indices: Major-Road Density (MRD, All-Traffic Density (ATD and Heavy-Traffic Density (HTD which represent the proportions of major roads, major road with annual average daily traffic (AADT, and major road with commercial annual average daily traffic (CAADT in a buffered area, respectively. We evaluated the potential of these indices as vehicle emission-specific near-road air pollutant indicators by analyzing their correlation with black carbon (BC, a marker for mobile source air pollutants, using measurement data obtained from the Near-road Exposures and Effects of Urban Air Pollutants Study (NEXUS. The average BC concentrations during a day showed variations consistent with changes in traffic volume which were classified into high, medium, and low for the morning rush hours, the evening rush hours, and the rest of the day, respectively. The average correlation coefficients between BC concentrations and MRD, ATD, and HTD, were 0.26, 0.18, and 0.48, respectively, as compared with −0.31 and 0.25 for two commonly used traffic indicators: nearest distance to a major road and total length of the major road. HTD, which includes only heavy-duty diesel vehicles in its traffic count, gives statistically significant correlation coefficients for all near-road distances (50, 100, 150, 200, 250, and 300 m that were analyzed. Generalized linear model (GLM analyses show that season, traffic volume, HTD, and distance from major roads are highly related to BC measurements. Our analyses

Joint road safety operations in tunnels and open roads

Science.gov (United States)

Adesiyun, Adewole; Avenoso, Antonio; Dionelis, Kallistratos; Cela, Liljana; Nicodème, Christophe; Goger, Thierry; Polidori, Carlo

2017-09-01

The objective of the ECOROADS project is to overcome the barrier established by the formal interpretation of the two Directives 2008/96/EC and 2004/54/EC, which in practice do not allow the same Road Safety Audits/Inspections to be performed inside tunnels. The projects aims at the establishment of a common enhanced approach to road infrastructure and tunnel safety management by using the concepts and criteria of the Directive 2008/96/CE on road infrastructure safety management and the results of related European Commission (EC) funded projects. ECOROADS has already implemented an analysis of national practices regarding Road Safety Inspections (RSI), two Workshops with the stakeholders, and an exchange of best practices between European tunnel experts and road safety professionals, which led to the definition of common agreed safety procedures. In the second phase of the project, different groups of experts and observers applied the above common procedures by inspecting five European road sections featuring both open roads and tunnels in Belgium, Albania, Germany, Serbia and Former Yugoslav Republic of Macedonia. This paper shows the feedback of the 5 joint safety operations and how they are being used for a set of - recommendations and guidelines for the application of the RSA and RSI concepts within the tunnel safety operations.

MELCOR Accident Consequence Code System (MACCS)

International Nuclear Information System (INIS)

Chanin, D.I.; Sprung, J.L.; Ritchie, L.T.; Jow, Hong-Nian

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previous CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. This document, Volume 1, the Users's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems

MELCOR Accident Consequence Code System (MACCS)

Energy Technology Data Exchange (ETDEWEB)

Chanin, D.I. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA)); Sprung, J.L.; Ritchie, L.T.; Jow, Hong-Nian (Sandia National Labs., Albuquerque, NM (USA))

1990-02-01

This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previous CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. This document, Volume 1, the Users's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems.

Distinguishing between Rural and Urban Road Segment Traffic Safety Based on Zero-Inflated Negative Binomial Regression Models

Directory of Open Access Journals (Sweden)

Xuedong Yan

2012-01-01

Full Text Available In this study, the traffic crash rate, total crash frequency, and injury and fatal crash frequency were taken into consideration for distinguishing between rural and urban road segment safety. The GIS-based crash data during four and half years in Pikes Peak Area, US were applied for the analyses. The comparative statistical results show that the crash rates in rural segments are consistently lower than urban segments. Further, the regression results based on Zero-Inflated Negative Binomial (ZINB regression models indicate that the urban areas have a higher crash risk in terms of both total crash frequency and injury and fatal crash frequency, compared to rural areas. Additionally, it is found that crash frequencies increase as traffic volume and segment length increase, though the higher traffic volume lower the likelihood of severe crash occurrence; compared to 2-lane roads, the 4-lane roads have lower crash frequencies but have a higher probability of severe crash occurrence; and better road facilities with higher free flow speed can benefit from high standard design feature thus resulting in a lower total crash frequency, but they cannot mitigate the severe crash risk.

How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis

OpenAIRE

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A. G.; Fahrig, Lenore; Findlay, C. Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these...

Tire-road noise: an experimental study of tire and road design parameters

OpenAIRE

Bekke, Dirk; Wijnant, Ysbrand H.; Weegerink, Thijs; de Boer, Andries

2013-01-01

It is widely known that road traffic noise has negative influences on human health. Hence, as tire-road noise is considered to be the most dominant cause of road traffic noise above 30-50 km/h, a lot of research is performed by the two involving industries: road authorities/manufacturers and tire manufacturers. Usually, the parameters influencing exterior tire-road noise are often examined separately, whereas it is the tire-road interaction which obviously causes the actual noise. An integral...

Electrorefining cell evaluation

Energy Technology Data Exchange (ETDEWEB)

Bronson, M.C.; Thomas, R.L. (ed.)

1989-04-14

Operational characteristics of the LANL electrorefining cell, a modified LANL electrorefining cell, and an advanced electrorefining cell (known as the CRAC cell) were determined. Average process yields achieved were: 75% for the LANL cell, 82% for the modified LANL cell, and 86% for the CRAC cell. All product metal from the LANL and modified LANL cells was within foundry specifications. Metal from one run in the CRAC cell exceeded foundry specifications for tantalum. The LANL and modified LANL cells were simple in design and operation, but product separation was more labor intensive than with the CRAC cell. The CRAC cell was more complicated in design but remained relatively simple in operation. A decision analysis concluded that the modified LANL cell was the preferred cell. It was recommended that the modified LANL cell be implemented by the Plutonium Recovery Project at Rocky Flats and that development of the CRAC cell continue. 8 refs., 22 figs., 12 tabs.

Roads at risk: traffic detours from debris flows in southern Norway

Science.gov (United States)

Meyer, N. K.; Schwanghart, W.; Korup, O.; Nadim, F.

2015-05-01

Globalisation and interregional exchange of people, goods, and services has boosted the importance of and reliance on all kinds of transport networks. The linear structure of road networks is especially sensitive to natural hazards. In southern Norway, steep topography and extreme weather events promote frequent traffic disruption caused by debris flows. Topographic susceptibility and trigger frequency maps serve as input into a hazard appraisal at the scale of first-order catchments to quantify the impact of debris flows on the road network in terms of a failure likelihood of each link connecting two network vertices, e.g. road junctions. We compute total additional traffic loads as a function of traffic volume and excess distance, i.e. the extra length of an alternative path connecting two previously disrupted network vertices using a shortest-path algorithm. Our risk metric of link failure is the total additional annual traffic load, expressed as vehicle kilometres, because of debris-flow-related road closures. We present two scenarios demonstrating the impact of debris flows on the road network and quantify the associated path-failure likelihood between major cities in southern Norway. The scenarios indicate that major routes crossing the central and north-western part of the study area are associated with high link-failure risk. Yet options for detours on major routes are manifold and incur only little additional costs provided that drivers are sufficiently well informed about road closures. Our risk estimates may be of importance to road network managers and transport companies relying on speedy delivery of services and goods.

Road Network Selection Based on Road Hierarchical Structure Control

Directory of Open Access Journals (Sweden)

HE Haiwei

2015-04-01

Full Text Available A new road network selection method based on hierarchical structure is studied. Firstly, road network is built as strokes which are then classified into hierarchical collections according to the criteria of betweenness centrality value (BC value. Secondly, the hierarchical structure of the strokes is enhanced using structural characteristic identification technique. Thirdly, the importance calculation model was established according to the relationships among the hierarchical structure of the strokes. Finally, the importance values of strokes are got supported with the model's hierarchical calculation, and with which the road network is selected. Tests are done to verify the advantage of this method by comparing it with other common stroke-oriented methods using three kinds of typical road network data. Comparision of the results show that this method had few need to semantic data, and could eliminate the negative influence of edge strokes caused by the criteria of BC value well. So, it is better to maintain the global hierarchical structure of road network, and suitable to meet with the selection of various kinds of road network at the same time.

Road pricing policy implementation

NARCIS (Netherlands)

Vonk Noordegraaf, D.M.

2016-01-01

Urban areas suffer from the negative externalities of road transport like congested road networks, air pollution and road traffic accidents. A measure to reduce these negative externalities is road pricing, meaning policies that impose direct charges on road use (Jones and Hervik, 1992). Since the

Evaluation of hybrid electric road train (HERT) as an alternative ...

African Journals Online (AJOL)

EDSA has been one of the busiest roads in the Philippines and essential component of the spatial structure of the Metro Manila. The decent growth of the areas around the avenue adds a great volume of traffic which cause traffic congestion and at the same time pollution. HERT is a 40 meter long vehicle, powered by an ...

eRoads

DEFF Research Database (Denmark)

Connolly, David

vehicles enable more renewable electricity to be integrated onto the electricity grid. This is particularly evident in 2050, since the price of fossil fuels increases while the price of renewable electricity and batteries decreases. Finally, the electric road scenarios can facilitate more reductions......This study compares electric roads with oil (petrol and diesel) and battery electric vehicles, using Denmark as a case study. Electric roads can reduce the cost of electric vehicles by supplying them with electricity directly from the road rather than via a battery for long-distance journeys....... In this paper, an electric road scenario is compared to both an oil and battery electric vehicle scenario using the 2010 Danish energy system, but for two sets of costs: one set based on historical costs from the year 2010 and one based on projected costs for the year 2050. The results indicate that electric...

Large Gaps in Canopy Reduce Road Crossing by a Gliding Mammal

Directory of Open Access Journals (Sweden)

Rodney van der Ree

2010-12-01

Full Text Available Roads and traffic reduce landscape connectivity and increase rates of mortality for many species of wildlife. Species that glide from tree to tree may be strongly affected by roads and traffic if the size of the gap between trees exceeds their gliding capability. Not only are wide roads likely to reduce crossing rates, but mortality may also be increased if gliders that do cross have poor landing opportunities. The road-crossing behavior of 47 squirrel gliders (Petaurus norfolcensis was investigated in southeast Australia using radio-tracking. The proportion of gliders crossing one or both roadways of a freeway where trees were present or absent from the center median was compared to that at single-lane country roads (control. The proportion of gliders crossing the road at control sites (77% was similar to the proportion that crossed one or both roadways at the freeway with trees in the median (67%, whereas only a single male (6% crossed the freeway where trees were absent from the median. The frequency of crossing for each individual was also similar at control sites and freeway sites with trees in the median. The almost complete lack of crossing at sites where trees were absent from the median was attributed to the wider gap in canopy (50 - 64 m vs. 5 - 13 m at sites with trees in the median. This suggests that traffic volume, up to 5,000 vehicles per day on each roadway, and the other characteristics of the freeway we studied are not in themselves complete deterrents to road crossing by squirrel gliders. This study demonstrates that retaining and facilitating the growth of tall trees in the center median of two-way roads may mitigate the barrier effect of roads on gliders, thus contributing positively to mobility and potentially to connectivity. This information will be essential for the assessment of road impacts on gliding species using population viability models.

Linking road accident data to other files : an integrated road accident recordkeeping system. Contribution in Proceedings of Seminar P 'Road Safety' held at the 14th PTHC Summer Annual Meeting, University of Sussex, England, from 14-17 July 1986. Volume P 284, p. 55-86.

NARCIS (Netherlands)

Harris, S.

1986-01-01

The road accident data which the police collect is of great value to road safety research and is used extensively. This data increases greatly in value if it can be linked to other files which contain more detailed information on exposure. Linking road accident data to other files results in what we

Spatial-temporal patterns in Mediterranean carnivore road casualties: Consequences for mitigation

Science.gov (United States)

Grilo, C.; Bissonette, J.A.; Santos-Reis, M.

2009-01-01

mitigation measures should help to reduce WVC in Portugal. The first involves the improvement of existing crossings with buried and small mesh size fence to guide the individuals towards to the passages, in road segments with high traffic volume (>1200 vehicles/night) and located in preferred carnivore habitats. The second mitigation involves cutting or removal of dense vegetation in verges of road segments with curves to aid motorists in seeing animals about to cross. ?? 2008 Elsevier Ltd.

[Prevention of road accidents in the road haulage field].

Science.gov (United States)

Rosso, G L; Zanelli, R; Corino, P; Bruno, S

2007-01-01

Every year many traffic accidents with fatal outcomes occur in our Country. According to the recent indications of the European Agency for Safety and Health at Work, the Piedmont region has financed the plan: Prevention of road accidents in the road haulage field. The aims of the plan are to stimulate transport companies to the target of road safety and to improve and enforce sanitary surveillance, in order to improve the safety on road haulage and to prevent traffic injuries. the plan foresees, over a period of two years, a few encounters with all the interested parties (companies, police forces, labour unions etc). During those encounters we have to give a questionnaire for evaluating the companies' knowledge about the problem and we have to choose a common plan with the aim of improving road safety. The Piedmont regional plan recalls the need to increase the attention to numerous and diversified hazards for safety on road haulage. It also imposes the choice of measures that include: risk assessment, health education, technical and environmental prevention, sanitary surveillance and clinical interventions (diagnosis and rehabilitation of occupational accidents).

Context sensitive multimodal road planning : a case study in Cape Town, South Africa

NARCIS (Netherlands)

Beukes, Edward; Vanderschuren, Marianne; Vanderschuren, M.J.W.A.; Zuidgeest, M.H.P.

2011-01-01

Road planning practice relies almost exclusively on parameters related to traffic factors, such as private vehicle speeds and volumes. In many developing countries the requirements for public transport and non-motorised transport are not explicitly integrated into the planning process, despite the

All-terrain vehicle fatalities on paved roads, unpaved roads, and off-road: Evidence for informed roadway safety warnings and legislation.

Science.gov (United States)

Denning, Gerene M; Jennissen, Charles A

2016-05-18

All-terrain vehicles (ATVs) are designed for off-highway use only, and many of their features create increased risk with roadway travel. Over half of all ATV-related fatalities occur on roadways, and nonfatal roadway crashes result in more serious injuries than those off the road. A number of jurisdictions have passed or have considered legislation allowing ATVs on public roadways, sometimes limiting them to those unpaved, arguing that they are safe for ATVs. However, no studies have determined the epidemiology of ATV-related fatalities on different road surface types. The objective of the study was to compare ATV-related deaths on paved versus unpaved roads and to contrast them with off-road fatalities. Retrospective descriptive and multivariable analyses were performed using U.S. Consumer Product Safety Commission fatality data from 1982 through 2012. After 1998, ATV-related deaths increased at twice the rate on paved versus unpaved roads. Still, 42% of all roadway deaths during the study period occurred on unpaved surfaces. States varied considerably, ranging from 18% to 79% of their ATV-related roadway deaths occurring on unpaved roads. Paved road crashes were more likely than those on unpaved surfaces to involve males, adolescents and younger adults, passengers, and collisions with other vehicles. Both the pattern of other vehicles involved in collisions and which vehicle hit the other were different for the 2 road types. Alcohol use was higher, helmet use was lower, and head injuries were more likely in paved versus unpaved roadway crashes. However, head injuries still occurred in 76% of fatalities on unpaved roads. Helmets were associated with lower proportions of head injuries among riders, regardless of road surface type. Relative to off-road crashes, both paved and unpaved roads were more likely to involve collisions with another vehicle. The vast majority of roadway crashes, however, did not involve a traffic collision on either paved or unpaved roads

Using endemic road features to create self-explaining roads and reduce vehicle speeds.

Science.gov (United States)

Charlton, Samuel G; Mackie, Hamish W; Baas, Peter H; Hay, Karen; Menezes, Miguel; Dixon, Claire

2010-11-01

This paper describes a project undertaken to establish a self-explaining roads (SER) design programme on existing streets in an urban area. The methodology focussed on developing a process to identify functional road categories and designs based on endemic road characteristics taken from functional exemplars in the study area. The study area was divided into two sections, one to receive SER treatments designed to maximise visual differences between road categories, and a matched control area to remain untreated for purposes of comparison. The SER design for local roads included increased landscaping and community islands to limit forward visibility, and removal of road markings to create a visually distinct road environment. In comparison, roads categorised as collectors received increased delineation, addition of cycle lanes, and improved amenity for pedestrians. Speed data collected 3 months after implementation showed a significant reduction in vehicle speeds on local roads and increased homogeneity of speeds on both local and collector roads. The objective speed data, combined with residents' speed choice ratings, indicated that the project was successful in creating two discriminably different road categories. 2010 Elsevier Ltd. All rights reserved.

Road safety performance indicators for the interurban road network.

Science.gov (United States)

Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima

2013-11-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.

Road Materials and Pavement Design volume 17(2)

CSIR Research Space (South Africa)

De Beer, Morris

2016-03-01

Full Text Available Materials and Pavement Design Volume 17, 2016 - Issue 2 Editorial Board Page ebi | Published online: 03 Oct 2016  http://dx.doi.org/10.1080/14680629.2016.1244475 Editors-in-Chief Hervé DI BENEDETTO - University of Lyon/ENTPE, Vaulx-en-Velin, France...

The effect of terrain factors on landslide features along forest road ...

African Journals Online (AJOL)

Results indicate that the landslide area at a distance of 80 to 100 m from road edge was significantly more than that of other distances. The landslide dimensions increased with increasing slope angle. The mean of landslide area and mean of landslide volume on the Northwest aspect was significantly more than that on ...

Temporal patterns in road crossing behaviour in roe deer (Capreolus capreolus at sites with wildlife warning reflectors.

Directory of Open Access Journals (Sweden)

Jim-Lino Kämmerle

Full Text Available Every year, there are millions of documented vehicle collisions involving cervids across Europe and North America. While temporal patterns in collision occurrence are relatively well described, few studies have targeted deer behaviour as a critical component of collision prevention. In this study, we investigated weekly and daily patterns in road crossing behaviour in roe deer. Using road crossing events and movement data obtained from GPS telemetry, we employed mixed-effect models to explain frequency and timing of crossings at five road segments by a number of predictors including traffic volume, deer movement activity and the presence of wildlife warning reflectors. We analysed 13,689 road crossing events by 32 study animals. Individual variation in crossing frequency was high but daily patterns in crossing events were highly consistent among animals. Variation in the intensity of movement activity on a daily and seasonal scale was the main driver of road crossing behaviour. The seasonal variation in crossing frequency reflected differences in movement activity throughout the reproductive cycle, while daily variation in the probability to cross exhibited a clear nocturnal emphasis and reflected crepuscular activity peaks. The frequency of road crossings increased as a function of road density in the home-range, while traffic volume only exerted marginal effects. Movement activity of roe deer in our study coincided with commuter traffic mainly in the early morning and late afternoon during winter and during periods of high spatial activity such as the rut. Both timing and frequency of crossing events remained unchanged in the presence of reflectors. Our results emphasise the importance of behavioural studies for understanding roe deer vehicle-collision patterns and thus provide important information for collision prevention. We suggest that mitigation of collision risk should focus on strategic seasonal measures and animal warning systems

Road density

Data.gov (United States)

U.S. Environmental Protection Agency — Road density is generally highly correlated with amount of developed land cover. High road densities usually indicate high levels of ecological disturbance. More...

Road accident rates: strategies and programmes for improving road traffic safety.

Science.gov (United States)

Goniewicz, K; Goniewicz, M; Pawłowski, W; Fiedor, P

2016-08-01

Nowadays, the problem of road accident rates is one of the most important health and social policy issues concerning the countries in all continents. Each year, nearly 1.3 million people worldwide lose their life on roads, and 20-50 million sustain severe injuries, the majority of which require long-term treatment. The objective of the study was to identify the most frequent, constantly occurring causes of road accidents, as well as outline actions constituting a basis for the strategies and programmes aiming at improving traffic safety on local and global levels. Comparative analysis of literature concerning road safety was performed, confirming that although road accidents had a varied and frequently complex background, their causes have changed only to a small degree over the years. The causes include: lack of control and enforcement concerning implementation of traffic regulation (primarily driving at excessive speed, driving under the influence of alcohol, and not respecting the rights of other road users (mainly pedestrians and cyclists), lack of appropriate infrastructure and unroadworthy vehicles. The number of fatal accidents and severe injuries, resulting from road accidents, may be reduced through applying an integrated approach to safety on roads. The strategies and programmes for improving road traffic should include the following measures: reducing the risk of exposure to an accident, prevention of accidents, reduction in bodily injuries sustained in accidents, and reduction of the effects of injuries by improvement of post-accident medical care.

Tire-road noise: an experimental study of tire and road design parameters

NARCIS (Netherlands)

Bekke, Dirk; Wijnant, Ysbrand H.; Weegerink, Thijs; de Boer, Andries

2013-01-01

It is widely known that road traffic noise has negative influences on human health. Hence, as tire-road noise is considered to be the most dominant cause of road traffic noise above 30-50 km/h, a lot of research is performed by the two involving industries: road authorities/manufacturers and tire

Demonstrating a correlation between the maturity of road safety practices and road safety incidents.

Science.gov (United States)

Amador, Luis; Willis, Christopher Joseph

2014-01-01

The objective of this study is to demonstrate a correlation between the maturity of a country's road safety practices and road safety incidents. Firstly, data on a number of road injuries and fatalities for 129 countries were extracted from the United Nations Global Status on Road Safety database. These data were subdivided according to road safety incident and accident causation factors and normalized based on vehicular fleet (per 1000 vehicles) and road network (per meter of paved road). Secondly, a road safety maturity model was developed based on an adaptation of the concept of process maturity modeling. The maturity of countries with respect to 10 road safety practices was determined through the identification of indicators recorded in the United Nations Global Status of Road Safety Database. Plots of normalized road safety performance of the 129 countries against their maturity scores for each road safety practice as well as an aggregation of the road safety practices were developed. An analysis of variance was done to determine the extent of the correlation between the road safety maturity of the countries and their performance. In addition, a full Bayesian analysis was done to confirm the correlation of each of the road safety practices with injuries and fatalities. Regression analysis for fatalities, injuries, and combined accidents identified maturity with respect to road safety practices associated with speed limits and use of alternative modes as being the most significant predictors of traffic fatalities. A full Bayesian regression confirms that there is a correlation between the maturity of road safety practices and road safety incidents. Road safety practices associated with enforcement of speed limits and promotion of alternative modes are the most significant road safety practices toward which mature countries have concentrated their efforts, resulting in a lower frequency of fatalities, injury rates, and property damage accidents. The authors

The numerical model for parametric studies of forest haul roads pavements

Directory of Open Access Journals (Sweden)

Lenka Ševelová

2010-01-01

Full Text Available Forest roads pavement structures are considered to be low volume roads. These roads serve as a mean of transport of wood and people. Besides they are currently often used for recreational purpose. The construction of the pavements should be suitable for forest transportation irrespective of their low bearing capacity. These pavement structures are very specific for special unbound materials that are used in their construction. To meet the requirements of the pavement designs and simulation analysis the FEM model in the software ANSYS was created.This paper compares two material models used for the description of the behaviour of unbound materials. The first is linear elastic according to Hook theory (H model and the second one is nonlinear plastic model Drucker-Prager (D–P model. ANSYS software has been used to create flexible model based on the parametrers of variable principle. The flexible model is parametric to realize repeated calculations useful for optimization analysis.

Optimum design of sustainable sealed low volume roads using the Dynamic Cone Penetrometer (DCP)

CSIR Research Space (South Africa)

Paige-Green, P

2012-09-01

Full Text Available in a reduction in the need to import large quantities of virgin material. Appropriate testing with the simple DCP test device can be used to assess the in situ conditions including material quality and moisture regimes along the road alignment...

CALCULATION PECULIARITIES OF RE-PROCESSED ROAD COVERING UNIT COST

Directory of Open Access Journals (Sweden)

Dilyara Kyazymovna Izmaylova

2017-09-01

Full Text Available In the article there are considered questions of economic expediency of non-waste technology application for road covering repair and restoration. Determined the conditions of asphalt-concrete processing at plants. Carried out cost changing analysis of asphalt granulate considering the conditions of transportation and preproduction processing. Given an example of expense calculation of one conventional unit of asphalt-concrete mixture volume preparation with and without processing.

Paving the Way for Invasive Species: Road Type and the Spread of Common Ragweed ( Ambrosia artemisiifolia)

Science.gov (United States)

Joly, Martin; Bertrand, Pascale; Gbangou, Roland Y.; White, Marie-Catherine; Dubé, Jean; Lavoie, Claude

2011-09-01

Roads function as prime habitats and corridors for invasive plant species. Yet despite the diversity of road types, there is little research on the influence of these types on the spread of invaders. Common ragweed ( Ambrosia artemisiifolia), a plant producing large amounts of allergenic pollen, was selected as a species model for examining the impact of road type on the spread of invasive plants. We examined this relationship in an agricultural region of Quebec, Canada. We mapped plant distribution along different road types, and constructed a model of species presence. Common ragweed was found in almost all sampling sites located along regional (97%) and local paved (81%) roads. However, verges of unpaved local roads were rarely (13%) colonized by the plant. A model (53% of variance explained), constructed with only four variables (paved regional roads, paved local roads, recently mown road verges, forest cover), correctly predicted (success rate: 89%) the spatial distribution of common ragweed. Results support the hypothesis that attributes associated with paved roads strongly favour the spread of an opportunistic invasive plant species. Specifically, larger verges and greater disturbance associated with higher traffic volume create propitious conditions for common ragweed. To date, emphasis has been placed on controlling the plant in agricultural fields, even though roadsides are probably a much larger seed source. Strategies for controlling the weed along roads have only focused on major highways, even though the considerable populations along local roads also contribute to the production of pollen. Management prioritizations developed to control common ragweed are thus questionable.

Lead pollution of road-side vegetation

Energy Technology Data Exchange (ETDEWEB)

Quinche, J P; Zuber, R; Bovay, E

1969-01-01

In Switzerland, investigations have been made in 1967/1968 concerning the distribution of lead issued from the antiknocking additive of petrol. Observations show that the deposits in meadows in the immediate surrounding (first meter) of roads and highways with high traffic density were especially high (50-100 ppm in dry matter). The pollution is still perceptible even as far as 50 meters from the road. Moreover, during the summer (July and August), a second zone of high lead accumulation (more than 100 ppm) was detected 50 to 100 m from the road, particularly along the highways. This probably is caused by certain climatic conditions and the increase of traffic volume. With regard to fruits, only the downy species (e.g. apricots, peaches) retain some quantities of lead on their skin. Vegetables with large leaves, e.g. lettuce, spinach, and particularly vegetables with definite dissected foliage, such as fennel and parsley, may accumulate relatively high quantities of lead. According to some authors, up to 50 percent of these deposits may be eliminated by washing with water. Conversely, root vegetables (e.g. carrots, onions) do not show a perceptible lead contamination. Likewise the flesh of fruits is not markedly polluted by lead. Trials with foddering milk cows using hay harvested along a highway are not yet analyzed. The results from these trials should permit determining the proportion of lead which remains in the tissues (meat etc.) or passes over into the milk.

Sustainable road safety: a new (?) neighbourhood road pattern that saves VRU lives.

Science.gov (United States)

Wei, Vicky Feng; Lovegrove, Gord

2012-01-01

Both the UN (2007) and World Health Organizations (2004) have declared the enormous social and economic burden imposed on society by injuries due to road collisions as a major global problem. While the road safety problem is not new, this prominent global declaration sends an important signal of frustration regarding progress to date on reducing road collisions. It is clear that governments, communities, businesses and the public must discover ways of reducing this burden, especially as it relates to vulnerable road users (VRUs), typically meaning pedestrian and bicyclist road users. Recent comparisons of global VRU collisions statistics suggest that, in addition to mixed land use density, the layout of neighbourhood roads plays a vital role in the encouragement of walkable, safe and quiet, yet accessible and sustainable communities. The purpose of this paper was to: The Dutch Sustainable Road Safety (SRS) Program has produced a number of innovative land use and transportation initiatives for vehicular road users as well as non-vehicular VRUs. Following from the Dutch initiatives, these new 3-way offset, and fused grid neighbourhood patterns appear to not only have positive effects in encouraging mode split (i.e. increasing walking and bicycling, and transit), slowing traffic, and reducing energy consumption and GHG emissions; but also, to hold potential to improve road safety. To test the road safety hypothesis, UBCO researchers evaluated the level of road safety relative to five neighbourhood patterns - grid, culs-de-sac, and Dutch Sustainable Road Safety (SRS) (or limited access), 3-way offset, and fused grid networks. Analysis using standard transportation planning methodology revealed that they would maintain both mobility and accessibility. Analysis using standard road safety analysis methodology further revealed that these 3-way offset, and fused grid patterns would significantly improve road safety levels by as much as 60% compared to prevalent patterns (i

Road Closures

Data.gov (United States)

Montgomery County of Maryland — This is an up to date map of current road closures in Montgomery County.This dataset is updated every few minutes from the Department of Transportation road closure...

Construction of Three-Dimensional Road Surface and Application on Interaction between Vehicle and Road

Directory of Open Access Journals (Sweden)

Lu Yongjie

2018-01-01

Full Text Available The quantitative description is given to three-dimensional micro and macro self-similar characteristics of road surface from the perspective of fractal geometry using FBM stochastic midpoint displacement and diamond-square algorithm in conjunction with fractal characteristics and statistical characteristics of standard pavement determined by estimation method of box-counting dimension. The comparative analysis between reconstructed three-dimensional road surface spectrum and theoretical road surface spectrum and correlation coefficient demonstrate the high reconstruction accuracy of fractal reconstructed road spectrum. Furthermore, the bump zone is taken as an example to reconstruct a more arbitrary 3D road model through isomorphism of special road surface with stochastic road surface model. Measurement is taken to assume the tire footprint on road surface to be a rectangle, where the pressure distribution is expressed with mean stiffness, while the contact points in the contact area are replaced with a number of springs. Two-DOF vehicle is used as an example to analyze the difference between three-dimensional multipoint-and-plane contact and traditional point contact model. Three-dimensional road surface spectrum provides a more accurate description of the impact effect of tire on road surface, thereby laying a theoretical basis for studies on the dynamical process of interaction of vehicle-road surface and the road friendliness.

Road rage and road traffic accidents among commercial vehicle drivers in Lahore, Pakistan.

Science.gov (United States)

Shaikh, M A; Shaikh, I A; Siddiqui, Z

2012-04-01

Road rage and road traffic accidents increase the burden of morbidity and mortality in a population. A cross-sectional survey with convenience sampling was conducted among commercial vehicle drivers in Lahore, Pakistan (n = 901) to record their behaviours/experiences regarding road rage and road traffic accidents. Respondents were asked about incidents of shouting/cursing/rude gestures or threats to physically hurt the person/vehicle, by others or themselves, in the previous 24 hours or 3 months, and their involvement in road traffic accidents in the previous 12 months. Auto-rickshaw drivers were significantly more likely to report various road rage experiences/behaviours and involvement in accidents compared with bus and wagon drivers. A total of 112 respondents (12.4%) reported being involved in a road traffic accident in the previous 12 months but traffic police did not record the accident in 52.7% of cases. The results of this study underline the need to improve road safety in Pakistan.

ENHANCEMENT OF ROAD SAFETY THROUGH MORE EFFECTIVE ROAD AND TRAFFIC MANAGEMENT

Directory of Open Access Journals (Sweden)

Tomasz SZCZURASZEK

2016-07-01

Full Text Available To make the policy aimed at mitigating the risk of road incidents more effective, Poland should see the introduction of the more efficient road and traffic management. In November 2008 the European Parliament and the European Council published the Directive on "infrastructure safety management" which provides guidance on the procedures for carrying impact assessments of traffic safety, traffic safety audits, safety management on the road network and monitoring traffic safety in Member States. In this article, the authors have proposed a systemic approach to road and traffic management, involving the implementation of consistent procedures that should include regular revisions of roads, eliminating hazardous sites, speed management, as well as the approval and implementation of traffic organization designs.

Diurnal variation of on-road air pollution in an urban street canyon in Seoul

Science.gov (United States)

Ho, Woo, Sung; Lee, Seung-Bok; Kim, Kyung Hwan; Bae, Gwi-Nam; Sunwoo, Young; Ma, Young-Il; Han, Dokyoung; Song, Sanghoo

2014-05-01

Motor vehicles are a major source of CO, NOx and particulate matters. Especially, in the surroundings of high-raised buildings, so-called an urban street canyon, air pollution levels increase due to limited dispersion of vehicle emissions. In this study, a mobile laboratory was used to measure diurnal variation of on-road concentrations of air pollutants such as NOx, particle-bound polycyclic aromatic hydrocarbons, black carbon and particle number in the urban street canyon on the Teheran road with eight lanes in Seoul, Korea from 5th to 8th November 2013. Each traveling distance was about 3.3km. Traveling vehicle at the middle of the Teheran road was recorded by video camera, and then the car counting by vehicle types. On road measurements conducted for 3~6 hours per day. Hourly average of air pollutant concentration in morning rush hour more than two times higher than those at the daybreak. We will analyze the correlation between air pollution levels and traffic volume by vehicle types. We will discuss about spatial characteristics of on-road air pollution levels in the urban street canyon.

Wildlife friendly roads: the impacts of roads on wildlife in urban areas and potential remedies

Science.gov (United States)

Riley, Seth P D; Brown, Justin L.; Sikich, Jeff A.; Schoonmaker, Catherine M.; Boydston, Erin E.

2014-01-01

Roads are one of the most important factors affecting the ability of wildlife to live and move within an urban area. Roads physically replace wildlife habitat and often reduce habitat quality nearby, fragment the remaining habitat, and cause increased mortality through vehicle collisions. Much ecological research on roads has focused on whether animals are successfully crossing roads, or if the road is a barrier to wildlife movement, gene flow, or functional connectivity. Roads can alter survival and reproduction for wildlife, even among species such as birds that cross roads easily. Here we examine the suite of potential impacts of roads on wildlife, but we focus particularly on urban settings. We report on studies, both in the literature and from our own experience, that have addressed wildlife and roads in urban landscapes. Although road ecology is a growing field of study, relatively little of this research, and relatively few mitigation projects, have been done in urban landscapes. We also draw from the available science on road impacts in rural areas when urban case studies have not fully addressed key topics.

Visibility of road markings on wet road surfaces : a literature study.

NARCIS (Netherlands)

Schreuder, D.A.

1981-01-01

The English version of B 14153 is presented. Road markings, notably lane markers, are often only poorly visible when the road is wet. This is particularly a problem at night on unlit roads. A study is made of whether a solution for this problem can be found on the basis of the known, published

Access road reclamation

International Nuclear Information System (INIS)

Manson, T.; Blok, M.

1997-01-01

A general review of the measures involved in restoring abandoned access road sites in British Columbia was presented. Permits and licences are needed for the use of crown land for roads used by the petroleum and natural gas industry for exploration activities. However, the regulatory framework for road site reclamation is not well developed. The nature of access road reclamation is very site-specific. Some of the issues that are considered for all reclamation projects include slope stability, water control, revegetation, soil rehabilitation, access management and monitoring. The primary objective of reclaiming access road sites is to return the site to conditions that are equal or better than pre-disturbance conditions. Restoration measures must be approved by BC Environment and by the Department of Fisheries and Oceans where federal fisheries responsibilities are involved. 54 refs., 5 tabs., 3 figs

Armenia - Rural Road Rehabilitation

Data.gov (United States)

Millennium Challenge Corporation — The key research questions guiding our design of the RRRP evaluation are: • Did rehabilitating roads affect the quality of roads? • Did rehabilitating roads improve...

Lead Concentrations in Soils and Some Wild Plant Species Along Two Busy Roads in Pakistan.

Science.gov (United States)

Khalid, Noreen; Hussain, Mumtaz; Young, Hillary S; Ashraf, Muhammad; Hameed, Mansoor; Ahmad, Rashid

2018-02-01

This study assessed the level of Pb in soil and five wild plant species (Calotropis procera, Datura alba, Parthenium hysterophorus, Cenchrus ciliaris and Ricinus communis) during all the four seasons. Two busy roads varying in age and traffic volume were selected i.e., Faisalabad-Sargodha road (FSR) and Pindi Bhattian to Lillah (M-2) in the Punjab, Pakistan. Results showed raised levels of Pb in both plants and soil samples along both roads. The range of Pb concentration in plants was 0.08-3.98 and 1.95-4.74 mg kg - 1 for soil. Higher Pb contamination was recorded along FSR road as compared to M-2. Among seasons, the higher Pb concentration was found during summer, probably due to very high temperature. Among all the plants studied, Calotropis procera accumulated the highest level (3.98 mg kg - 1 dry wt.) of Pb; Thus, it can be used as good biomonitor/phytoremediator at Pb contaminated areas.

Bobcats (Lynx rufus) as a Model Organism to Investigate the Effects of Roads on Wide-Ranging Carnivores.

Science.gov (United States)

Litvaitis, John A; Reed, Gregory C; Carroll, Rory P; Litvaitis, Marian K; Tash, Jeffrey; Mahard, Tyler; Broman, Derek J A; Callahan, Catherine; Ellingwood, Mark

2015-06-01

We are using bobcats (Lynx rufus) as a model organism to examine how roads affect the abundance, distribution, and genetic structure of a wide-ranging carnivore. First, we compared the distribution of bobcat-vehicle collisions to road density and then estimated collision probabilities for specific landscapes using a moving window with road-specific traffic volume. Next, we obtained incidental observations of bobcats from the public, camera-trap detections, and locations of bobcats equipped with GPS collars to examine habitat selection. These data were used to generate a cost-surface map to investigate potential barrier effects of roads. Finally, we have begun an examination of genetic structure of bobcat populations in relation to major road networks. Distribution of vehicle-killed bobcats was correlated with road density, especially state and interstate highways. Collision models suggested that some regions may function as demographic sinks. Simulated movements in the context of the cost-surface map indicated that some major roads may be barriers. These patterns were supported by the genetic structure of bobcats. The sharpest divisions among genetically distinct demes occurred along natural barriers (mountains and large lakes) and in road-dense regions. In conclusion, our study has demonstrated the utility of using bobcats as a model organism to understand the variety of threats that roads pose to a wide-ranging species. Bobcats may also be useful as one of a group of focal species while developing approaches to maintain existing connectivity or mitigate the negative effects of roads.

Is the travel time of private roads too short, too long, or just right?

NARCIS (Netherlands)

van den Berg, V.A.C.; Verhoef, E.T.

2012-01-01

We consider price and service-quality setting in oligopolistic markets for congestible services, applied to the case of private roads. Previous studies show that parallel competitors set a volume/capacity ratio (and thereby a travel time or service quality) that is socially optimal if they take the

Future of energy efficiency and carbon dioxide emissions of Finnish road freight transport

Energy Technology Data Exchange (ETDEWEB)

Liimatainen, H.

2013-05-15

The targets to reduce the carbon dioxide emissions to mitigate climate change are as much applicable to the road freight transport sector as they are to all other sectors of society. The aim of this research is to support the initiatives of the Finnish government for improving the energy efficiency and reducing the CO{sub 2} emissions of road freight transport. This is done by forecasting the future development and giving the policy makers guidance on effective measures for promoting road freight energy efficiency and CO{sub 2} reduction. In the study a new method was introduced for connecting the fuel consumption data and goods transport data gathered from the official Finnish road statistics. This method enabled a detailed analysis of the interrelations between the economy, road freight transport, energy consumption and emissions. This analysis was conducted for the years 1995-2010 and the results were used as background information in the Delphi panel of experts. The experts estimated the development of the Finnish road freight sector to the year 2030. Furthermore, a web-based survey was conducted among Finnish road freight hauliers and shippers in order to explore the attitudes and measures related to the energy efficiency. Expert panel workshops were also organised to identify obstacles for the development of the energy efficiency of road freight transport as well as a wide selection of measures to overcome them. The results indicate that the economic development of different branches has a great effect on the energy efficiency and carbon dioxide emissions of road freight transport. Reaching the carbon emission target for the year 2030 is possible in the light of the scenarios which were formed based on expert forecasts. However, the target can be achieved with very different development paths, e.g. the structure of the national economy and the volume of transport seem to vary widely in the different scenarios. In the proposed recommendations on the measures

Road Infrastructure Safety Management in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

Road safety analysis on Achmad Yani frontage road Surabaya

Science.gov (United States)

Machsus; Prayogo, I.; Chomaedhi; Hayati, D. W.; Utanaka, A.

2017-11-01

This research discusses road safety analysis on the operation of frontage road on the west side of Achmad Yani Road Surabaya. This research began by conducting survey on secondary data of traffic accidents. In addition, primary data survey was conducted to obtain traffic data, geometric road data, and other supporting data at the study site along the west side frontage of Ahmad Yani Road Surabaya. Devices used in this research include camera, handy cam, speed gun, counters of vehicles, rolling meter, computer and others. In outline, the stages to conduct this research are divided into 4 stages, namely 1.the preparation stage, 2.data collection and processing, 3. analysis and discussion, and 4. conclusion. The results of this study showed that the accident characteristics of the frontage road are (i) 3 accidents occured per month, (ii) motorcycles was accounted for the largest proportion of accidents which amounted to 74.6 percent, (iii) there were 3 accident victims per month, and (iv) material losses per month worths 1.2 million. The accident rate in 2016 was 0.04 crashes per one million vehicle travels per kilometer, while during 2 months in 2017 it was 0.15 accidents per one million vehicle travels per kilometer. Black spot area of accident is located on Sta 2 + 800 to 2 + 900 which is in front of Graha Pena building and DBL Arena. The high rate of accidents is influenced by the speed of the vehicle which 85 percentile exceeds the speed limit of 40km per hour.

Improved Road-Network-Flow Control Strategy Based on Macroscopic Fundamental Diagrams and Queuing Length in Connected-Vehicle Network

Directory of Open Access Journals (Sweden)

Xiaohui Lin

2017-01-01

Full Text Available Connected-vehicles network provides opportunities and conditions for improving traffic signal control, and macroscopic fundamental diagrams (MFD can control the road network at the macrolevel effectively. This paper integrated proposed real-time access to the number of mobile vehicles and the maximum road queuing length in the Connected-vehicles network. Moreover, when implementing a simple control strategy to limit the boundary flow of a road network based on MFD, we determined whether the maximum queuing length of each boundary section exceeds the road-safety queuing length in real-time calculations and timely adjusted the road-network influx rate to avoid the overflow phenomenon in the boundary section. We established a road-network microtraffic simulation model in VISSIM software taking a district as the experimental area, determined MFD of the region based on the number of mobile vehicles, and weighted traffic volume of the road network. When the road network was tending to saturate, we implemented a simple control strategy and our algorithm limits the boundary flow. Finally, we compared the traffic signal control indicators with three strategies: (1 no control strategy, (2 boundary control, and (3 boundary control with limiting queue strategy. The results show that our proposed algorithm is better than the other two.

Comparison of the physical and chemical characteristics of fine road dust at different urban sites.

Science.gov (United States)

Lee, Kwang Yul; Batmunkh, Tsatsral; Joo, Hung Soo; Park, Kihong

2018-04-18

The size distribution and chemical components of a fine fraction (road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100-110 nm, and the second peak was observed at 435-570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8-16.8%) than at those in Korea (1.2-4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter. Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.

Quantifying diffuse pathways for overland flow between the roads and streams of the mountain ash forests of central Victoria Australia

Science.gov (United States)

Lane, Patrick N. J.; Hairsine, Peter B.; Croke, Jacky C.; Takken, Ingrid

2006-06-01

Limiting connectivity between road runoff sources and stream networks is crucial for preservation of water quality in forested environments. Where flow is non-eroding, the length of hillslope available to accommodate volumes of discharged water is the key to restricting connectivity. Hairsine et al. ([2002], Hydrological Processes 16: 2311-2327) proposed a probabilistic model of diffuse overland flow that predicted the hillslope lengths required to infiltrate road discharge, based on the concept of volume to breakthrough (Vbt). This paper extends this analysis to a different forest environment with the aim of testing the portability of the Hairsine et al. ([2002]) model. The volume of flow required to travel overland to a distance of 5 and 10 m (Vbt5 and Vbt10) from drainage outlets was measured in deep, highly conductive mountain soils in the Upper Tyers catchment, Victoria, Australia. Rainfall, hydraulic conductivity and soil depths contrasted markedly with those in the Hairsine et al. ([2002]) study, and represent an extreme in Australian forests. Statistical analyses revealed the population of Vbt5 to be indistinguishable from that observed by Hairsine et al. ([2002]), indicating the model is valid for a range of forest soils. There was no significant correlation of sediment plume length with site characteristics such as slope, width of flow, or existence of incised pathways. It is suggested there are universal properties of pathways draining tracks and roads, with bioturbation acting to restore available pore spaces filled by antecedent plumes. Drain discharge design criteria may be developed for local conditions using the Hairsine et al. ([2002]) model, providing a robust tool for protection of water quality in the siting of new forest roads, and maintenance of exiting roads and tracks.

Method for estimating road salt contamination of Norwegian lakes

Science.gov (United States)

Kitterød, Nils-Otto; Wike Kronvall, Kjersti; Turtumøygaard, Stein; Haaland, Ståle

2013-04-01

Consumption of road salt in Norway, used to improve winter road conditions, has been tripled during the last two decades, and there is a need to quantify limits for optimal use of road salt to avoid further environmental harm. The purpose of this study was to implement methodology to estimate chloride concentration in any given water body in Norway. This goal is feasible to achieve if the complexity of solute transport in the landscape is simplified. The idea was to keep computations as simple as possible to be able to increase spatial resolution of input functions. The first simplification we made was to treat all roads exposed to regular salt application as steady state sources of sodium chloride. This is valid if new road salt is applied before previous contamination is removed through precipitation. The main reasons for this assumption are the significant retention capacity of vegetation; organic matter; and soil. The second simplification we made was that the groundwater table is close to the surface. This assumption is valid for major part of Norway, which means that topography is sufficient to delineate catchment area at any location in the landscape. Given these two assumptions, we applied spatial functions of mass load (mass NaCl pr. time unit) and conditional estimates of normal water balance (volume of water pr. time unit) to calculate steady state chloride concentration along the lake perimeter. Spatial resolution of mass load and estimated concentration along the lake perimeter was 25 m x 25 m while water balance had 1 km x 1 km resolution. The method was validated for a limited number of Norwegian lakes and estimation results have been compared to observations. Initial results indicate significant overlap between measurements and estimations, but only for lakes where the road salt is the major contribution for chloride contamination. For lakes in catchments with high subsurface transmissivity, the groundwater table is not necessarily following the

Epidemiologic study of road traffic injuries by road user type characteristics and road environment in Iran: a community-based approach.

Science.gov (United States)

Hatamabadi, Hamidreza; Vafaee, Reza; Hadadi, Mashyaneh; Abdalvand, Ali; Esnaashari, Hamidreza; Soori, Hamid

2012-01-01

Crash injuries in traffic accidents are affected by a variety of factors. In this study we analyzed road user type information based on different contributing factors. Data from all of the road traffic victims on a road extending from the east of the city of Tehran to Mazandaran province were included prospectively over a one-year period (May 2008 to May 2009). Data collected included the crash time, patient's age and sex, road user category, helmet or seat belt use, anatomical site of injury, Injury Severity Score (ISS), and mortality. Prevalence and cross-tabulations were included in the analysis. There were 433 patients, of whom 345 were hospitalized and 33 died either before or after arriving at the hospital. Sixty-nine percent of injured patients were vehicle occupants. Mean and median of ISS were higher for pedestrians, who accounted for 49 percent of the deaths. Head injury was the most common injury and injury to upper and lower extremities was the most common cause of admission. A significant difference in lower extremity injuries between vehicle occupants and nonoccupants was found. Sex and age group did not have a significant effect on mortality. Mortality was significantly higher in pedestrians (P road user type. Because pedestrians are the most vulnerable road users, stricter legislation and law enforcement should be used to protect them. Greater protection can also be reached by holding effective public awareness campaigns on how to use different roads safely. On the other hand, because rear seat passengers are at the same risk for road traffic injuries as front seat passengers, employment of newer laws and preventive measures targeting this group of occupants can prevent many road traffic injuries (RTIs).

Use of fatal real-life crashes to analyze a safe road transport system model, including the road user, the vehicle, and the road.

Science.gov (United States)

Stigson, Helena; Krafft, Maria; Tingvall, Claes

2008-10-01

To evaluate if the Swedish Road Administration (SRA) model for a safe road transport system, which includes the interaction between the road user, the vehicle, and the road, could be used to classify fatal car crashes according to some safety indicators. Also, to present a development of the model to better identify system weakness. Real-life crashes with a fatal outcome were classified according to the vehicle's safety rating by Euro NCAP (European Road Assessment Programme) and fitment of ESC (Electronic Stability Control). For each crash, the road was also classified according to EuroRAP (European Road Assessment Programme) criteria, and human behavior in terms of speeding, seat belt use, and driving under the influence of alcohol. Each crash was compared with the model criteria, to identify components that might have contributed to fatal outcome. All fatal crashes where a car occupant was killed that occurred in Sweden during 2004 were included: in all, 215 crashes with 248 fatalities. The data were collected from the in-depth fatal crash data of the Swedish Road Administration (SRA). It was possible to classify 93% of the fatal car crashes according to the SRA model. A number of shortcomings in the criteria were identified since the model did not address rear-end or animal collisions or collisions with stationary/parked vehicles or trailers (18 out of 248 cases). Using the further developed model, it was possible to identify that most of the crashes occurred when two or all three components interacted (in 85 of the total 230 cases). Noncompliance with safety criteria for the road user, the vehicle, and the road led to fatal outcome in 43, 27, and 75 cases, respectively. The SRA model was found to be useful for classifying fatal crashes but needs to be further developed to identify how the components interact and thereby identify weaknesses in the road traffic system. This developed model might be a tool to systematically identify which of the components are

Overload road damage model

CSIR Research Space (South Africa)

Roux, MP

2005-03-01

Full Text Available Not only do overloaded vehicles pose an increased safety risk on the road (reduced stability and braking efficiency etc.), but they also accelerate the rate of deterioration of the road network and increase road maintenance costs, which in turn...

The relative influence of road characteristics and habitat on adjacent lizard populations in arid shrublands

Science.gov (United States)

Hubbard, Kaylan A.; Chalfoun, Anna D.; Gerow, Kenneth G.

2016-01-01

As road networks continue to expand globally, indirect impacts to adjacent wildlife populations remain largely unknown. Simultaneously, reptile populations are declining worldwide and anthropogenic habitat loss and fragmentation are frequently cited causes. We evaluated the relative influence of three different road characteristics (surface treatment, width, and traffic volume) and habitat features on adjacent populations of Northern Sagebrush Lizards (Sceloporus graciosus graciosus), Plateau Fence Lizards (S. tristichus), and Greater Short-Horned Lizards (Phrynosoma hernandesi) in mixed arid shrubland habitats in southwest Wyoming. Neither odds of lizard presence nor relative abundance was significantly related to any of the assessed road characteristics, although there was a trend for higher Sceloporus spp. abundance adjacent to paved roads. Sceloporus spp. relative abundance did not vary systematically with distance to the nearest road. Rather, both Sceloporus spp. and Greater Short-Horned Lizards were associated strongly with particular habitat characteristics adjacent to roads. Sceloporus spp. presence and relative abundance increased with rock cover, relative abundance was associated positively with shrub cover, and presence was associated negatively with grass cover. Greater Short-Horned Lizard presence increased with bare ground and decreased marginally with shrub cover. Our results suggest that habitat attributes are stronger correlates of lizard presence and relative abundance than individual characteristics of adjacent roads, at least in our system. Therefore, an effective conservation approach for these species may be to consider the landscape through which new roads and their associated development would occur, and the impact that placement could have on fragment size and key habitat elements.

The impact of road improvements on road safety and related characteristics

OpenAIRE

Francis John Gichaga

2017-01-01

This paper presents the historical and cultural background relating to road improvement and road safety characteristics in Kenya, a developing country in East Africa. Some who come from low-developed areas of developing countries often take time to comprehend the modern transportation infrastructure, especially roads, and have difficulty assimilating and customizing the same to their culturally tailored modes. This paper discusses two case studies: one on the socio-economic impact followin...

Road dust emissions from paved roads measured using different mobile systems.

Science.gov (United States)

Pirjola, Liisa; Johansson, Christer; Kupiainen, Kaarle; Stojiljkovic, Ana; Karlsson, Hans; Hussein, Tareq

2010-12-01

Very few real-world measurements of road dust suspension have been performed to date. This study compares two different techniques (referred to as Sniffer and Emma) to measure road dust emissions. The main differences between the systems are the construction of the inlet, different instruments for recording particulate matter (PM) levels, and different loads on the wheel axes (the weight of Sniffer was much higher than that of Emma). Both systems showed substantial small-scale variations of emission levels along the road, likely depending on-road surface conditions. The variations observed correlated quite well, and the discrepancies are likely a result of variations in dust load on the road surface perpendicular to the driving direction that cause variations in the measurements depending on slightly different paths driven by the two vehicles. Both systems showed a substantial influence on the emission levels depending on the type of tire used. The summer tire showed much lower suspension than the winter tires (one nonstudded and one studded). However, the relative importance of the nonstudded versus studded tire was rather different. For the ratio of studded/nonstudded, Emma shows higher values on all road sections compared with Sniffer. Both techniques showed increased emission levels with increasing vehicle speed. When the speed increased from 50 to 80 km hr(-1), the relative concentrations increased by 30-170% depending on the tire type and dust load. However, for road sections that were very dirty, Sniffer showed a much higher relative increase in the emission level with the nonstudded tire. Sniffer's absolute concentrations were mostly higher than Emma's. Possible reasons for the differences are discussed in the paper. Both systems can be used for studying relative road dust emissions and for designing air quality management strategies.

Characteristics of public roads operation

OpenAIRE

Pryimak, V.; Kyiashko, I.

2009-01-01

Characteristics of public roads operation have been considered and factors influencing TEC of public roads that go via urban areas have been determined. There have been revealed contradictions in the normative-legal base concerning maintenance of public roads and municipal roads that merge into them.

PHOTOGRAMMETRIC TECHNIQUES FOR ROAD SURFACE ANALYSIS

Directory of Open Access Journals (Sweden)

V. A. Knyaz

2016-06-01

Full Text Available The quality and condition of a road surface is of great importance for convenience and safety of driving. So the investigations of the behaviour of road materials in laboratory conditions and monitoring of existing roads are widely fulfilled for controlling a geometric parameters and detecting defects in the road surface. Photogrammetry as accurate non-contact measuring method provides powerful means for solving different tasks in road surface reconstruction and analysis. The range of dimensions concerned in road surface analysis can have great variation from tenths of millimetre to hundreds meters and more. So a set of techniques is needed to meet all requirements of road parameters estimation. Two photogrammetric techniques for road surface analysis are presented: for accurate measuring of road pavement and for road surface reconstruction based on imagery obtained from unmanned aerial vehicle. The first technique uses photogrammetric system based on structured light for fast and accurate surface 3D reconstruction and it allows analysing the characteristics of road texture and monitoring the pavement behaviour. The second technique provides dense 3D model road suitable for road macro parameters estimation.

Future Road Density

Data.gov (United States)

U.S. Environmental Protection Agency — Road density is generally highly correlated with amount of developed land cover. High road densities usually indicate high levels of ecological disturbance. More...

Challenges of raising road maintenance funds in developing countries: An analysis of road tolling in Zimbabwe

Directory of Open Access Journals (Sweden)

T. C. Mbara

2010-11-01

Full Text Available The condition of Zimbabwe's roads has been declining due to insufficient maintenance and rehabilitation. Year on year, budget allocations have compared unfavourably with funding considered adequate to maintain highway networks and conduct modest construction work. Road infrastructure shortcomings have manifested themselves in the form of high vehicle operating costs and rampant potholes, leading to a decline in road safety and a deterioration of service levels for those who use roads to deliver goods or connect to international markets. In order to try and stop this vicious cycle of decline, the Government of Zimbabwe, on 8 August 2009, introduced a new policy of road-user charges, which involved the setting-up of 22 toll gates on the trunk road network. The overall objective was to raise revenue in order to close the funding gap, blamed for declining road quality. Although alternative methods of financing road maintenance have been debated for years, a generally accepted understanding is that road users should pay costs for road provisioning. This paper assesses the implementation of a road tolling system in Zimbabwe and describes matters relating to, inter alia, implementation strategy, initial performance outcomes and sustainability.

VT Road Centerline

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata)(User Guide)(Symbology layer files: aotclass_only.lyr aotclass_surfacetyp.lyr)The Vermont Road Centerline data layer (TransRoad_RDS) contains all...

RoADS: A road pavement monitoring system for anomaly detection using smart phones

NARCIS (Netherlands)

Seraj, Fatjon; van der Zwaag, B.J.; Dilo, Arta; Luarasi, Tamara; Havinga, Paul J.M.; Atzmueller, Martin; Chin, Alvin; Janssen, Frederik; Schweizer, Immanuel; Trattner, Christoph

2016-01-01

Monitoring the road pavement is a challenging task. Authorities spend time and finances to monitor the state and quality of the road pavement. This paper investigate road surface monitoring with smartphones equipped with GPS and inertial sensors: accelerometer and gyroscope. In this study we

RoADS: A road pavement monitoring system for anomaly detection using smart phones

NARCIS (Netherlands)

Seraj, Fatjon; van der Zwaag, B.J.; Dilo, Arta; Luarasi, Tamara; Havinga, Paul J.M.

2014-01-01

Monitoring the road pavement is a challenging task. Authorities spend time and finances to monitor the state and quality of the road pavement. This paper investigate road surface monitoring with smartphones equipped with GPS and inertial sensors: accelerometer and gyroscope. In this study we

Road Materials and Pavement Design Volume 17(1)

CSIR Research Space (South Africa)

De Beer, Morris

2016-03-01

Full Text Available Materials and Pavement Design Volume 17, 2016 - Issue 1 Editorial Board Page ebi | Published online: 03 Oct 2016  http://dx.doi.org/10.1080/14680629.2016.1244475 Editors-in-Chief Hervé DI BENEDETTO - University of Lyon/ENTPE, Vaulx-en-Velin, France... Andrew Charles COLLOP - De Montfort University, Leicester, UK William G. BUTTLAR - University of Missouri, Urbana-Champaign, USA Editor-in-Chief at Large Jorge B. Sousa - Consulpav, Oeiras, Portugal Associate Editors Morris de Beer - CSIR Built...

Performance standards of road safety management

Directory of Open Access Journals (Sweden)

Čabarkapa Milenko R.

2016-01-01

Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

Estimation of Road Friction Coefficient in Different Road Conditions Based on Vehicle Braking Dynamics

Science.gov (United States)

Zhao, You-Qun; Li, Hai-Qing; Lin, Fen; Wang, Jian; Ji, Xue-Wu

2017-07-01

The accurate estimation of road friction coefficient in the active safety control system has become increasingly prominent. Most previous studies on road friction estimation have only used vehicle longitudinal or lateral dynamics and often ignored the load transfer, which tends to cause inaccurate of the actual road friction coefficient. A novel method considering load transfer of front and rear axles is proposed to estimate road friction coefficient based on braking dynamic model of two-wheeled vehicle. Sliding mode control technique is used to build the ideal braking torque controller, which control target is to control the actual wheel slip ratio of front and rear wheels tracking the ideal wheel slip ratio. In order to eliminate the chattering problem of the sliding mode controller, integral switching surface is used to design the sliding mode surface. A second order linear extended state observer is designed to observe road friction coefficient based on wheel speed and braking torque of front and rear wheels. The proposed road friction coefficient estimation schemes are evaluated by simulation in ADAMS/Car. The results show that the estimated values can well agree with the actual values in different road conditions. The observer can estimate road friction coefficient exactly in real-time and resist external disturbance. The proposed research provides a novel method to estimate road friction coefficient with strong robustness and more accurate.

Road grip test in Arjeplog

OpenAIRE

Engström, Niclas; Andrén, Henrik; Nybacka, Mikael; Fransson, Lennart; Larsson, Roland

2008-01-01

The Swedish road administration sees a need to improve the road grip estimation capacity for the Swedish road system. The challenge is to find methods to measure road grip fast and reliable. There where six different system types at the tests in Arjeplog, three continuous, two system measuring road grip through deceleration and one system based on GPS and accelerometers. Two system types used air craft runway tires. The other systems used either studded winter tires or friction winter tires. ...

Conceptual design and analysis of roads and road construction machinery for initial lunar base operations

Science.gov (United States)

Sines, Jeffrey L.; Banks, Joel; Efatpenah, Keyanoush

1990-01-01

Recent developments have made it possible for scientists and engineers to consider returning to the Moon to build a manned lunar base. The base can be used to conduct scientific research, develop new space technology, and utilize the natural resources of the Moon. Areas of the base will be separated, connected by a system of roads that reduce the power requirements of vehicles traveling on them. Feasible road types for the lunar surface were analyzed and a road construction system was designed for initial lunar base operations. A model was also constructed to show the system configuration and key operating features. The alternate designs for the lunar road construction system were developed in four stages: analyze and select a road type; determine operations and machinery needed to produce the road; develop machinery configurations; and develop alternates for several machine components. A compacted lunar soil road was selected for initial lunar base operations. The only machinery required to produce this road were a grader and a compactor. The road construction system consists of a main drive unit which is used for propulsion, a detachable grader assembly, and a towed compactor.

Roads Near Streams

Data.gov (United States)

U.S. Environmental Protection Agency — Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into...

Navigating Without Road Maps: The Early Business of Automobile Route Guide Publishing in the United States

Science.gov (United States)

Bauer, John T.

2018-05-01

In the United States, automobile route guides were important precursors to the road maps that Americans are familiar with today. Listing turn-by-turn directions between cities, they helped drivers navigate unmarked, local roads. This paper examines the early business of route guide publishing through the Official Automobile Blue Book series of guides. It focuses specifically on the expansion, contraction, and eventual decline of the Blue Book publishing empire and also the work of professional "pathfinders" that formed the company's data-gathering infrastructure. Be- ginning in 1901 with only one volume, the series steadily grew until 1920, when thirteen volumes were required to record thousands of routes throughout the country. Bankruptcy and corporate restructuring in 1921 forced the publishers to condense the guide into a four-volume set in 1922. Competition from emerging sheet maps, along with the nationwide standardization of highway numbers, pushed a switch to an atlas format in 1926. Blue Books, however, could not remain competitive and disappeared after 1937. "Pathfinders" were employed by the publishers and equipped with reliable automobiles. Soon they developed a shorthand notation system for recording field notes and efficiently incorporating them into the development workflow. Although pathfinders did not call themselves cartographers, they were geographical data field collectors and considered their work to be an "art and a science," much the same as modern-day cartographers. The paper concludes with some comments about the place of route guides in the history of American commercial cartography and draws some parallels between "pathfinders" and the digital road mappers of today.

Driving and off-road impairments underlying failure on road testing in Parkinson's disease.

Science.gov (United States)

Devos, Hannes; Vandenberghe, Wim; Tant, Mark; Akinwuntan, Abiodun E; De Weerdt, Willy; Nieuwboer, Alice; Uc, Ergun Y

2013-12-01

Parkinson's disease (PD) affects driving ability. We aimed to determine the most critical impairments in specific road skills and in clinical characteristics leading to failure on a road test in PD. In this cross-sectional study, certified driving assessment experts evaluated specific driving skills in 104 active, licensed drivers with PD using a standardized, on-road checklist and issued a global decision of pass/fail. Participants also completed an off-road evaluation assessing demographic features, disease characteristics, motor function, vision, and cognition. The most important driving skills and off-road predictors of the pass/fail outcome were identified using multivariate stepwise regression analyses. Eighty-six (65%) passed and 36 (35%) failed the on-road driving evaluation. Persons who failed performed worse on all on-road items. When adjusted for age and gender, poor performances on lateral positioning at low speed, speed adaptations at high speed, and left turning maneuvers yielded the best model that determined the pass/fail decision (R(2) = 0.56). The fail group performed poorer on all motor, visual, and cognitive tests. Measures of visual scanning, motor severity, PD subtype, visual acuity, executive functions, and divided attention were independent predictors of pass/fail decisions in the multivariate model (R(2) = 0.60). Our study demonstrated that failure on a road test in PD is determined by impairments in specific driving skills and associated with deficits in motor, visual, executive, and visuospatial functions. These findings point to specific driving and off-road impairments that can be targeted in multimodal rehabilitation programs for drivers with PD. © 2013 Movement Disorder Society.

Road pricing, air pollution and external costs; Road pricing, luftforurening og eksternalitetsomkostninger

Energy Technology Data Exchange (ETDEWEB)

Solvang Jensen, S.; Ketzel, M. (Aarhus Univ., Danmarks Miljoeundersoegelser, Afd. for Atmosfaerisk Miljoe, Roskilde (Denmark)); Skou Andersen, M. (Aarhus Univ., Danmarks Miljoeundersoegelser, Afd. for Systemanalyse, Roskilde (Denmark))

2010-06-15

The objective of this assessment is to improve the foundation for decision-making about introduction of a road pricing system that aims to reduce the health impacts and social costs of traffic-related air pollution. The analysis focuses on how road emissions, air quality, population exposure, and social costs of air pollution depend on geography (different city sizes and rural areas) and time of the day (rush hours versus non-rush hours). A review of Danish studies related to road pricing has also been carried out to assess the expected effect of road pricing on traffic performance (km travelled), vehicle composition and speed that are factors affecting air pollution. (LN)

Road safety and road traffic accidents in Saudi Arabia

Science.gov (United States)

Mansuri, Farah A.; Al-Zalabani, Abdulmohsen H.; Zalat, Marwa M.; Qabshawi, Reem I.

2015-01-01

Objectives: To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. Methods: This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Medicine, Taibah University, Al-Madinah Al-Munawwarah, KSA. Results: Road traffic accidents accounted for 83.4% of all trauma admissions in 1984-1989, and no such overall trend was studied thereafter. The most frequently injured body regions as reported in the latest studies were head and neck, followed by upper and lower extremities, which was found to be opposite to that of the studies reported earlier. Hospital data showed an 8% non-significant increase in road accident mortalities in contrast to police records of a 27% significant reduction during the years 2005-2010. Excessive speeding was the most common cause reported in all recent and past studies. Conclusion: Disparity was common in the type of reporting of RTAs, outcome measures, and possible causes over a period of 2.5 decade. All research exclusively looked into the drivers’ faults. A sentinel surveillance of road crashes should be kept in place in the secondary and tertiary care hospitals for all regions of KSA. PMID:25828277

Road traffic noise: self-reported noise annoyance versus GIS modelled road traffic noise exposure.

Science.gov (United States)

Birk, Matthias; Ivina, Olga; von Klot, Stephanie; Babisch, Wolfgang; Heinrich, Joachim

2011-11-01

self-reported road traffic noise annoyance is commonly used in epidemiological studies for assessment of potential health effects. Alternatively, some studies have used geographic information system (GIS) modelled exposure to road traffic noise as an objective parameter. The aim of this study was to analyse the association between noise exposure due to neighbouring road traffic and the noise annoyance of adults, taking other determinants into consideration. parents of 951 Munich children from the two German birth cohorts GINIplus and LISAplus reported their annoyance due to road traffic noise at home. GIS modelled road traffic noise exposure (L(den), maximum within a 50 m buffer) from the noise map of the city of Munich was available for all families. GIS-based calculated distance to the closest major road (≥10,000 vehicles per day) and questionnaire based-information about family income, parental education and the type of the street of residence were explored for their potential influence. An ordered logit regression model was applied. The noise levels (L(den)) and the reported noise annoyance were compared with an established exposure-response function. the correlation between noise annoyance and noise exposure (L(den)) was fair (Spearman correlation r(s) = 0.37). The distance to a major road and the type of street were strong predictors for the noise annoyance. The annoyance modelled by the established exposure-response function and that estimated by the ordered logit model were moderately associated (Pearson's correlation r(p) = 0.50). road traffic noise annoyance was associated with GIS modelled neighbouring road traffic noise exposure (L(den)). The distance to a major road and the type of street were additional explanatory factors of the noise annoyance appraisal.

Quantifying the Road-Effect Zone: Threshold Effects of a Motorway on Anuran Populations in Ontario, Canada

Directory of Open Access Journals (Sweden)

Felix Eigenbrod

2009-06-01

Full Text Available The negative effect of roads on wildlife is recognized as a major contributor to the global biodiversity crisis, with anurans being among the most vulnerable groups overall. The "road-effect zone," i.e., the extent of significant ecological effects from the edge of a road (Forman and Alexander 1998, has important management implications, but has never been quantified for anurans. In the first study of its kind, we measured the extent and type of relationship underlying the road-effect zones of a motorway with a high proportion of heavy-truck traffic, particularly at night (Highway 401 for anuran species richness and relative abundance. We surveyed 34 ponds located 68-3262 m from the edge of the motorway, and used piecewise and linear regressions to determine if road-effect zones were clearly delineated by ecological thresholds. We found road-effect zones of 250-1000 m delineated by ecological thresholds for four of seven species and species richness, and road-effect zones of well beyond 1000 m best described by linear regressions for two species. The negative effect of Highway 401 was unexpectedly strong for four of seven species suggest that, in addition to road mortality, very high nighttime truck traffic can actually lead to reduced use of breeding habitat near the motorway either by acting as a barrier to forest habitat on the other side of the highway and/or because of traffic noise. Our results show that most anurans are likely to have reduced abundances near motorways, but that both the extent of the effect of this type of road and the underlying relationship vary considerably between species. Furthermore, the noise and/or barrier effect of very high nighttime traffic volumes can lead to negative effects of motorways even on species that are relatively unaffected by direct road mortality.

A study of the landslide potential along the mountain road using environmental indices

Science.gov (United States)

Lin, C. Y.

2014-12-01

Utilization of slope land in recent years is rapid as a result of the dense population and limit of land resources in Taiwan. Therefore, mountain road plays an essential role for the necessity of human life. However, landslide disaster resulting in road failure occurred frequently in Taiwan on the slope land due to earthquake and typhoon. Previous studies found that the extreme rainfall coupled with the property of fragile geology could cause landslide. Nevertheless, the landslide occurrence might be affected by the drainage of the road side ditches. Taiwan Highway No.21 in Chi-Shan watershed and the forest roads located in Xiao-Lin Village, which failure during the hit of Typhoon Morakot in 2009, were selected for exploring the potential of vulnerable to landslides. Topographic Wetness Index (TWI) and Road Curvature (RC) were extracted along the road to indicate the potential sites which are vulnerable to slope failure. The surface runoff diverted by the road side ditches could spoil the sites with high RC due to the straight movement characteristics of the diverted runoff and cause the downslope collapse. The sites with higher mean value and lower standard deviation of Normalized Difference Vegetation Index (NDVI) derived from the SPOT imagery taken in dry and/or rainy seasons could be implied as the vegetation stands showing highly buffer effects in environmental stress due to having deeper soil layer, and are hardly interfered by the drought. The stands located in such sites once collapsed are often resulting in huge volumes of debris. Drainage Density (DD) index could be applied as the degrees of geologic fragile in the slope land. A road across the sites with higher mean value and lower standard deviation of NDVI and/or higher DD should be paid more attention because of having highly vulnerable to deep seated landslide. This study is focusing on extracting and analyzing the environmental indices such as TWI, RC, NDVI and DD for exploring the slope stability

FEATURES ROAD SAFETY AUDIT

Directory of Open Access Journals (Sweden)

L. Abramova

2015-07-01

Full Text Available Development of the road network, increasing motorization of the population significantly increase the risk of accidents. Experts in the field of traffic are developing methods to reduce the probability of accidents. The ways of solving the problems of road safety audit at various stages of the «life» of roads are considered.

Spatio-temporal Variations in on-road CO2 Emissions in the Los Angeles Megacity

Directory of Open Access Journals (Sweden)

Preeti Rao

2017-06-01

Full Text Available We quantify hourly on-road fossil fuel carbon dioxide (FFCO2 emissions at the road segment level for the Los Angeles (LA megacity based on observed traffic data, and characterize emission patterns across space and time. This on-road FFCO2 emissions dataset for LA (from Hestia version 1.0, based on actual traffic volume, provides emissions per vehicle kilometer travelled (VKT—an important metric for greenhouse gas (GHG reductions. We further identify emissions hotpots that can help state and local policy makers plan the most effective GHG reduction strategies. On-road vehicle traffic accounts for half of the FFCO2 emissions in LA, of which 41% is from arterials (intermediate road type. Arterials also have the largest C emissions intensity—FFCO2 per VKT—possibly from high traffic congestion and fleet composition. Non-interstate emissions hotspots (> 419 tC lane-km-1 are equally dominated by arterials and collectors (the lowest road type in terms of FFCO2 emissions though collectors have a higher VKT. These hotspots occur in densely populated areas and developed landuse classes, largely in LA (67% and Orange (18% counties, and provide specific targets for emissions reduction efforts. The estimated uncertainties for interstate, arterial and collector emissions per road length are ± 2.1, ± 0.5 and ± 18.0%, respectively. Our overall estimates compare reasonably well with other products, DARTE and FIVE but with substantial differences in spatial distribution. The method for developing this dataset is easily replicable in other urban landscapes, and represents a powerful tool for carbon cycle science and regional policy makers.

Identifying unstable sites on logging roads

Science.gov (United States)

R. M. Rice; J. Lewis

1986-01-01

Logging roads are an important source of forestry-related erosion. The amount of erosion on a forest road is determined by the interaction between how the road is constructed and maintained and the environment in which it is built. The roads in this study were constructed with large bulldozers, and most excavated material was sidecast. The roads studied were...

Resource Roads demonstration project : final report

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-15

British Columbia's vast network of resource roads are considered to be amongst the most dangerous, high-risk workplaces in the province. Resource roads, also known as industrial roads, forest service roads, or petroleum development roads, present several unique safety challenges as workplaces. They are built for the purpose of access, egress and transport of materials, resources, equipment and people. However, the lack the same diligence of enforcement and a consistent design, construction, maintenance and standard for use as public highways or municipal roads. There are also safety challenges related to public use of resource roads. This report presented a project, called ResourceRoads by WorkSafe BC that focused on the organization and implementation of a management structure that would provide a system of coordination and a process of compliance for the users of the defined road systems. The project was based on information gathered in two forest districts of Prince George and the South Peace Forest Districts. A committee consisting of the actual owner of the road and other users was formed. The report presented a history of British Columbia's resource road system, and discussed resource roads as industrial workplaces and worksites, as well as resource road fatality statistics. The demonstration project was outlined in terms of project leadership; scope; strategic objectives; project purpose; performance objectives; project communication; demonstration areas; and project stages. Project fundamentals and project findings were also presented along with recommendations and responses to the Auditor General report and the Forest Safety Ombudsman report. It was concluded that potential uses of new technologies for resource road vehicles should be reviewed. tabs., figs.

TRUPACT-I over-the-road test

International Nuclear Information System (INIS)

Glass, R.E.; Gwinn, K.W.

1987-10-01

The TRUPACT-I was subjected to an over-the-road test to determine the package response to normal road environments. This test consisted of six road events: a rough primary road, a railroad grade crossing, an asphalt primary road, a concrete primary road, a bridge approach, and a rough secondary road. The package was instrumented with four vertical accelerometers to determine the package response to road vibration and shock. The results are given in the form of time histories, spectral densities, root mean square, and maximum accelerations for all accelerometers during each event. The results indicated that the railroad grade crossing produced the maximum average vertical accelerations. The maximum accelerations for all events were less than 1 g, and the root mean square loads remained below 0.25 g. 4 refs., 57 figs., 7 tabs

Road deaths in the Netherlands. [Previously known as: Road fatalities in The Netherlands.

NARCIS (Netherlands)

2011-01-01

This fact sheet outlines the development of the number of road deaths in the Netherlands since 1950. After a rise in the 1950s and 1960s, the number of road deaths in the Netherlands has shown a gradual decline since 1973. In 2016, there were 629 road deaths in the Netherlands. After the years of

What is vision Hampton Roads?

Science.gov (United States)

2010-01-01

What is Vision Hampton Roads? : Vision Hampton Roads is... : A regionwide economic development strategy based on the collective strengths of all : localities of Hampton Roads, created with the input of business, academia, nonprofits, : government,...

Phosphorylated Protein Kinase C (Zeta/Lambda) Expression in Colorectal Adenocarcinoma and Its Correlation with Clinicopathologic Characteristics and Prognosis.

Science.gov (United States)

Yeo, Min-Kyung; Kim, Ji Yeon; Seong, In-Ock; Kim, Jin-Man; Kim, Kyung-Hee

2017-01-01

Background: Protein kinase C zeta/lambda (PKCζ/λ) is a family of protein kinase enzymes that contributes to cell proliferation and regulation, which are important for cancer development. PKCζ/λ has been shown to be an important regulator of tumorigenesis in intestinal cancer. The phosphorylated form of PKCζ/λ, p-PKCζ/λ, is suggested as an active form of PKCζ/λ. However, p-PKCζ/λ expression and its clinicopathologic implication in colorectal adenocarcinoma (CRAC) are unclear. Methods: Seven whole-tissue sections of malignant polyps containing both non-neoplastic and neoplastic mucosa, 11 adenomas with low-grade dysplasia, and 173 CRACs were examined by immunohistochemistry and western blot assay for p-PKCζ/λ protein expression. The association of p-PKCζ/λ expression with clinicopathologic factors including patient survival was studied. Results: In non-neoplastic epithelia, p-PKCζ/λ showed a weak cytoplasmic immunostaining. Adenomas and CRACs demonstrated up-regulated p-PKCζ/λ detection. Cytoplasmic p-PKCζ/λ expression was higher in CRAC than in adenoma. In CRACs, p-PKCζ/λ expression was inversely correlated with pathologic TNM stage (I-II versus III-IV) and poor differentiation. Statistical correlations between low expression of p-PKCζ/λ with shortened overall survival and disease-free survival were seen (p=0.004 and p=0.034, respectively). Conclusions: P-PKCζ/λ overexpression is implicated in tumorigenesis but down-regulation was a poor prognostic factor in CRAC.

A Study on the Influence of Speed on Road Roughness Sensing: The SmartRoadSense Case

Directory of Open Access Journals (Sweden)

Giacomo Alessandroni

2017-02-01

Full Text Available SmartRoadSense is a crowdsensing project aimed at monitoring the conditions of the road surface. Using the sensors of a smartphone, SmartRoadSense monitors the vertical accelerations inside a vehicle traveling the road and extracts a roughness index conveying information about the road conditions. The roughness index and the smartphone GPS data are periodically sent to a central server where they are processed, associated with the specific road, and aggregated with data measured by other smartphones. This paper studies how the smartphone vertical accelerations and the roughness index are related to the vehicle speed. It is shown that the dependence can be locally approximated with a gamma (power law. Extensive experimental results using data extracted from SmartRoadSense database confirm the gamma law relationship between the roughness index and the vehicle speed. The gamma law is then used for improving the SmartRoadSense data aggregation accounting for the effect of vehicle speed.

Life in the Fast Lane: Road Crossing Behavior of Mule Deer in a Wildland-Urban Interface

Energy Technology Data Exchange (ETDEWEB)

Hansen, Leslie A. [Los Alamos National Laboratory; Biggs, James [Northern New Mexico College; Bennett, Kathryn D. [Los Alamos National Laboratory; Bare, Carey [Bare and Associates, LLC; Sherwood, Sherri R. [Los Alamos National Laboratory

2012-04-04

In 2009, approximately 260,000 animal-vehicle collisions were reported in the United States, resulting in 12,000 human injuries and 173 human fatalities. Research has focused on identifying factors associated with high densities of animal-vehicle collisions, including variables such as traffic speed and volume, road design, topographic features, vegetative cover, and local deer or elk (Cervus elaphus) abundance. The purposes of this study were to document how often and where mule deer (Odocoileus hemionus) crossed roads in a western United States wildland-urban interface area, and to relate deer road-crossing behavior to deer-vehicle collision locations. Seven adult mule deer (four males [M] and three females [F]) were captured and collared with GPS-enabled collars during December 2001 and January 2002. Five of the seven deployed collars were recovered. None of the roads in the study area appeared to act as a substantial barrier to deer passage. Deer home ranges straddled highways and primary, secondary, and tertiary arterial roads. Deer crossed all types of roads. The average number of times deer crossed road during 24 hours of monitoring ranged from 2.1 to 7.0. Deer in the Los Alamos townsite avoided crossing roads during day and before sunset. Deer-vehicle accidents occurred at 350 percent of the level expected after sunset. All other time periods had fewer accidents than expected. The distribution of accidents across time periods was not similar to the distribution of road crossings across time periods for any deer. Within Los Alamos County there was a clear trend for deer-vehicle collisions to occur on roads with speed limits > 35 mph. Deer in the townsite frequently crossed roads with lower speed limits; therefore, the reason for the paucity of accidents along these roads was evidently the ability of drivers to detect deer (or the ability of deer to detect vehicles) and respond before an accident occurred. There was a significant but not strong correlation

Road Infrastructure and Road User’s Satisfactions: A Case Study of Motorway Route 7, Thailand

Directory of Open Access Journals (Sweden)

Suanmali Suthathip

2014-01-01

Full Text Available The development of tourism in Thailand relies on the development of appropriate infrastructure. Road access is the key infrastructure issue for tourist destinations throughout Thailand. Each year Thailand has welcomed over 15 million travelers, accounted approximately 7% of GDP. To support tourist activities, variety types of transportation modes have designed. However, road transportation is one of the most effective modes that connect most places together. Beside high-standard vehicles, road is another mechanism that derive comfort and safety of travelling. For this reason, Motorway networks were initiated and constructed to support high speed traffic with high safety and standard. Motorway route 7 is one of major motorway networks that lies between major cities and tourist landmarks. To raise the road standard could be the key to support tourist industry and economic growth. The road developments may not be precise and accurate without knowing the needs from road users’. Therefore, a questionnaire is developed and distributed to 890 randomly selected road users along Motorway route 7. Factor analysis and t-test are employed to analyze the factors affecting road users’ satisfaction and to compare the satisfaction level between both inbound and outbound travelers.

Louisiana ESI: ROADS (Road Lines)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...

The safe road transport system approach

Directory of Open Access Journals (Sweden)

Vollpracht Hans-Joachim

2016-07-01

Full Text Available More than 1,24 million people die each year on the worlds roads and between 20 to 50 million suffer from nonfatal injuries. The UN Road Safety Collaboration Meetings under the leadership of WHO developed the Programme for the Decade of Actions for road safety taking nations into the responsibility of improving their accident figures by the five pillars of a national Road Safety Policy, safer Roads, safer Vehicles, safer Road Users and Post Crash Care. It is this Safe System Approach that takes into consideration the land use, infrastructure and transport planning, road user’s abilities and limitations and the close cooperation of all governmental and none governmental stakeholders involved.

Study On Risk Handling Strategy Of Road Contruction Projects In Jayapura City

Directory of Open Access Journals (Sweden)

Irianto

2017-08-01

Full Text Available Project risk is an event or an uncertain condition which if it appears will have a threat on the project object. Many contractors still do not understand the threats that occur in the project they still assume that risks are always harmful. Based on data from the Papua Public Works procurement service that the implementation of road improvement projects always faces problems. This research is an explorative and descriptive study which explores the risks threats that occur in the project from the contractors perspective in Jayapura Papua Province Indonesia. The object of this research is the company contractor involved in the implementation of road improvement project in Jayapura whereas the respondent is the project manager and the field supervisor involved in the implementation of road improvement project The analysis result shows that the overall level of risk is in very low category and the biggest risks affecting contractors in sequence are 1 material delays from suppliers 2 material inventories 3 design difficulties 4 incorrectly shipped material volumes 5 changes to specifications by the owner 6 difficulty in obtaining materials and equipment 7 material price increases 8 over quality 9 damage to machine tools 10 weakening the bearing capacity of subgrade soil. While the response to risks threats that occur in road improvement projects is to reduce and avoid.

Life-cycle cost comparison of alternative surfacing for steep slopes on low-volume roads in Ghana

CSIR Research Space (South Africa)

Anochie-Boateng, Joseph K

2017-05-01

Full Text Available surfacing options to gravel wearing courses used on steep gradients (in excess of 12%) of feeder roads in Ghana. A major outcome was three surfacing options (i.e. concrete, bituminous and stone setts/cobbles) that would be more effective to address drainage...

Reflection properties of road surfaces. Contribution to OECD Scientific Expert Group AC4 on Road Surface Characteristics.

NARCIS (Netherlands)

Schreuder, D.A.

1983-01-01

Photometric characteristics of road surfaces are dealt with. Representation of reflection properties in public lighting; quality criteria of road lighting installations; classification of road surfaces; the relation between reflection characteristics and other properties of road pavements in public

Road safety audits: The way forward

CSIR Research Space (South Africa)

Labuschagne, FJJ

2010-08-01

Full Text Available The South African Road Safety Manual (SARSM) was published in 1999 and includes guidelines on road safety audits (RSA). The development of SARSM was a proactive process for improving the road environment with respect to road safety but was never...

Parameterizing road construction in route-based road weather models: can ground-penetrating radar provide any answers?

International Nuclear Information System (INIS)

Hammond, D S; Chapman, L; Thornes, J E

2011-01-01

A ground-penetrating radar (GPR) survey of a 32 km mixed urban and rural study route is undertaken to assess the usefulness of GPR as a tool for parameterizing road construction in a route-based road weather forecast model. It is shown that GPR can easily identify even the smallest of bridges along the route, which previous thermal mapping surveys have identified as thermal singularities with implications for winter road maintenance. Using individual GPR traces measured at each forecast point along the route, an inflexion point detection algorithm attempts to identify the depth of the uppermost subsurface layers at each forecast point for use in a road weather model instead of existing ordinal road-type classifications. This approach has the potential to allow high resolution modelling of road construction and bridge decks on a scale previously not possible within a road weather model, but initial results reveal that significant future research will be required to unlock the full potential that this technology can bring to the road weather industry. (technical design note)

To cross or not to cross: modeling wildlife road crossings as a binary response variable with contextual predictors

Science.gov (United States)

Siers, Shane R.; Reed, Robert N.; Savidge, Julie A.

2016-01-01

Roads are significant barriers to landscape-scale movements of individuals or populations of many wildlife taxa. The decision by an animal near a road to either cross or not cross may be influenced by characteristics of the road, environmental conditions, traits of the individual animal, and other aspects of the context within which the decision is made. We considered such factors in a mixed-effects logistic regression model describing the nightly road crossing probabilities of invasive nocturnal Brown Treesnakes (Boiga irregularis) through short-term radiotracking of 691 snakes within close proximity to 50 road segments across the island of Guam. All measures of road magnitude (traffic volume, gap width, surface type, etc.) were significantly negatively correlated with crossing probabilities. Snake body size was the only intrinsic factor associated with crossing rates, with larger snakes crossing roads more frequently. Humidity was the only environmental variable affecting crossing rate. The distance of the snake from the road at the start of nightly movement trials was the most significant predictor of crossings. The presence of snake traps with live mouse lures during a portion of the trials indicated that localized prey cues reduced the probability of a snake crossing the road away from the traps, suggesting that a snake's decision to cross roads is influenced by local foraging opportunities. Per capita road crossing rates of Brown Treesnakes were very low, and comparisons to historical records suggest that crossing rates have declined in the 60+ yr since introduction to Guam. We report a simplified model that will allow managers to predict road crossing rates based on snake, road, and contextual characteristics. Road crossing simulations based on actual snake size distributions demonstrate that populations with size distributions skewed toward larger snakes will result in a higher number of road crossings. Our method of modeling per capita road crossing

The importance of accurate road data for spatial applications in public health: customizing a road network

Directory of Open Access Journals (Sweden)

Laraia Barbara A

2009-05-01

Full Text Available Abstract Background Health researchers have increasingly adopted the use of geographic information systems (GIS for analyzing environments in which people live and how those environments affect health. One aspect of this research that is often overlooked is the quality and detail of the road data and whether or not it is appropriate for the scale of analysis. Many readily available road datasets, both public domain and commercial, contain positional errors or generalizations that may not be compatible with highly accurate geospatial locations. This study examined the accuracy, completeness, and currency of four readily available public and commercial sources for road data (North Carolina Department of Transportation, StreetMap Pro, TIGER/Line 2000, TIGER/Line 2007 relative to a custom road dataset which we developed and used for comparison. Methods and Results A custom road network dataset was developed to examine associations between health behaviors and the environment among pregnant and postpartum women living in central North Carolina in the United States. Three analytical measures were developed to assess the comparative accuracy and utility of four publicly and commercially available road datasets and the custom dataset in relation to participants' residential locations over three time periods. The exclusion of road segments and positional errors in the four comparison road datasets resulted in between 5.9% and 64.4% of respondents lying farther than 15.24 meters from their nearest road, the distance of the threshold set by the project to facilitate spatial analysis. Agreement, using a Pearson's correlation coefficient, between the customized road dataset and the four comparison road datasets ranged from 0.01 to 0.82. Conclusion This study demonstrates the importance of examining available road datasets and assessing their completeness, accuracy, and currency for their particular study area. This paper serves as an example for assessing

Tools for road infrastructure safety management in poland

Directory of Open Access Journals (Sweden)

Kustra Wojciech

2017-01-01

Full Text Available Road safety can be improved by implementing principles of road safety infrastructure management (RIS on the network of European roads as adopted in the Directive. The document recommends that member states should use tried and tested tools for road safety management such as: road safety impact assessment (RIA, road safety audit (RSA, safety management on existing road networks including road safety ranking (RSM and road safety inspection (RSI. The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions.

Assessment of the radiological risks of road transport accidents involving Type A packages

International Nuclear Information System (INIS)

Lange, F.; Fett, H.J.; Schwarz, G.; Raffestin, D.; Schneider, T.; Gelder, R.; S. Hughes, J.; B. Shaw, K.; Hedberg, B.; Simenstad, P.; Svahn, B.; Heinen, J.F.A. van; Jansma, R.

2001-01-01

An assessment and evaluation of the potential radiological risks of transport accidents involving Type A package shipments by road have been performed by five EU Member States, France, Germany, Sweden, The Netherlands, and the UK. The analysis involved collection and analysis of information on a national basis related to the type, volume, and characteristics of Type A package consignments, the associated radioactive traffic, and the expected frequency and consequences of potential vehicular road transport accidents. It was found that the majority of Type A packaged radioactive material shipments by road is related to applications of non-special form radioactive material, i.e. radiopharmaceuticals, radiochemicals etc., in medicine, research, and industry and special form material contained in radiography and other radiation sources, e.g. gauging equipment. The annual volumes of Type A package shipments of radiopharmaceuticals and radiochemicals by road differ considerably between the participating EU Member States from about 12,000 Type A packages in Sweden to about 240,000 in the Netherlands. The broad range reflects to a large extent the supply of radioactive material for the national populations and the production and distribution operations prevailing in the participating EU Member States (some are producer countries, others are not!). Very few standard package designs weighing from about 1-25 kg are predominant in Type A package shipments in all participating countries. Type A packages contain typically a range of radioactivity from a few mega becquerels to a few tens of giga becquerels, the average package activity contents is in terms of fractions of A 2 about 0.01, i.e. about one hundredth of a Type A package contents limits. Based on a probabilistic risk assessment method it has been concluded that the expected frequencies of occurrence of vehicular road transport accidents with the potential to result in an environmental release - including radiologically

Ranking EU progress on road safety : 11th road safety Performance Index (PIN) report.

NARCIS (Netherlands)

Adminaite, D. Jost, G. Stipdonk, H. & Ward, H.

2017-01-01

In 2010, the European Union renewed its commitment to improve road safety by setting a target of reducing road deaths by 50% by 2020, compared to 2010 levels. This target followed an earlier target set in 2001 to halve road deaths by 2010. Since 2014, progress has virtually ground to a halt. 2016

A combined road weather forecast system to prevent road ice formation in the Adige Valley (Italy)

Science.gov (United States)

Di Napoli, Claudia; Piazza, Andrea; Antonacci, Gianluca; Todeschini, Ilaria; Apolloni, Roberto; Pretto, Ilaria

2016-04-01

Road ice is a dangerous meteorological hazard to a nation's transportation system and economy. By reducing the pavement friction with vehicle tyres, ice formation on pavements increases accident risk and delays travelling times thus posing a serious threat to road users' safety and the running of economic activities. Keeping roads clear and open is therefore essential, especially in mountainous areas where ice is likely to form during the winter period. Winter road maintenance helps to restore road efficiency and security, and its benefits are up to 8 times the costs sustained for anti-icing strategies [1]. However, the optimization of maintenance costs and the reduction of the environmental damage from over-salting demand further improvements. These can be achieved by reliable road weather forecasts, and in particular by the prediction of road surface temperatures (RSTs). RST is one of the most important parameters in determining road surface conditions. It is well known from literature that ice forms on pavements in high-humidity conditions when RSTs are below 0°C. We have therefore implemented an automatic forecast system to predict critical RSTs on a test route along the Adige Valley complex terrain, in the Italian Alps. The system considers two physical models, each computing heat and energy fluxes between the road and the atmosphere. One is Reuter's radiative cooling model, which predicts RSTs at sunrise as a function of surface temperatures at sunset and the time passed since then [2]. One is METRo (Model of the Environment and Temperature of Roads), a road weather forecast software which also considers heat conduction through road material [3]. We have applied the forecast system to a network of road weather stations (road weather information system, RWIS) installed on the test route [4]. Road and atmospheric observations from RWIS have been used as initial conditions for both METRo and Reuter's model. In METRo observations have also been coupled to

Modelling road dust emission abatement measures using the NORTRIP model: Vehicle speed and studded tyre reduction

Science.gov (United States)

Norman, M.; Sundvor, I.; Denby, B. R.; Johansson, C.; Gustafsson, M.; Blomqvist, G.; Janhäll, S.

2016-06-01

Road dust emissions in Nordic countries still remain a significant contributor to PM10 concentrations mainly due to the use of studded tyres. A number of measures have been introduced in these countries in order to reduce road dust emissions. These include speed reductions, reductions in studded tyre use, dust binding and road cleaning. Implementation of such measures can be costly and some confidence in the impact of the measures is required to weigh the costs against the benefits. Modelling tools are thus required that can predict the impact of these measures. In this paper the NORTRIP road dust emission model is used to simulate real world abatement measures that have been carried out in Oslo and Stockholm. In Oslo both vehicle speed and studded tyre share reductions occurred over a period from 2004 to 2006 on a major arterial road, RV4. In Stockholm a studded tyre ban on Hornsgatan in 2010 saw a significant reduction in studded tyre share together with a reduction in traffic volume. The model is found to correctly simulate the impact of these measures on the PM10 concentrations when compared to available kerbside measurement data. Importantly meteorology can have a significant impact on the concentrations through both surface and dispersion conditions. The first year after the implementation of the speed reduction on RV4 was much drier than the previous year, resulting in higher mean concentrations than expected. The following year was much wetter with significant rain and snow fall leading to wet or frozen road surfaces for 83% of the four month study period. This significantly reduced the net PM10 concentrations, by 58%, compared to the expected values if meteorological conditions had been similar to the previous years. In the years following the studded tyre ban on Hornsgatan road wear production through studded tyres decreased by 72%, due to a combination of reduced traffic volume and reduced studded tyre share. However, after accounting for exhaust

30 CFR 816.151 - Primary roads.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Primary roads. 816.151 Section 816.151 Mineral... roads. Primary roads shall meet the requirements of section 816.150 and the additional requirements of this section. (a) Certification. The construction or reconstruction of primary roads shall be certified...

Road Anomalies Detection System Evaluation.

Science.gov (United States)

Silva, Nuno; Shah, Vaibhav; Soares, João; Rodrigues, Helena

2018-06-21

Anomalies on road pavement cause discomfort to drivers and passengers, and may cause mechanical failure or even accidents. Governments spend millions of Euros every year on road maintenance, often causing traffic jams and congestion on urban roads on a daily basis. This paper analyses the difference between the deployment of a road anomalies detection and identification system in a “conditioned” and a real world setup, where the system performed worse compared to the “conditioned” setup. It also presents a system performance analysis based on the analysis of the training data sets; on the analysis of the attributes complexity, through the application of PCA techniques; and on the analysis of the attributes in the context of each anomaly type, using acceleration standard deviation attributes to observe how different anomalies classes are distributed in the Cartesian coordinates system. Overall, in this paper, we describe the main insights on road anomalies detection challenges to support the design and deployment of a new iteration of our system towards the deployment of a road anomaly detection service to provide information about roads condition to drivers and government entities.

Road design, human behaviour, and road accidents : towards a `learning design community'. Paper presented at the international conference `Road safety in Europe', Birmingham, England, September 9-11, 1996.

NARCIS (Netherlands)

Wegman, F.C.M.

1996-01-01

This paper discusses a number of unsolved problems in the field of road design (i.e. geometric design), human behaviour and road safety, particularly concerning the operationalisation of the existing design principles for a safe road network in terms of concrete road design in existing

The Development of child road safety competence : the new approach tо road safety education

OpenAIRE

Vilkonis, Rytis

2005-01-01

The education and information are the strategies of the Road safety. However, some of the documents and scientific findings revealed the chaotic, desultory and theoretically groundless Road safety education and it can be stated that Road safety education system in Lithuania is still being established. The shortage of the theoretical and empirical base of Road safety education is slowing down the process of the system development. Aim of the research is to disclose the assumptions for developm...

Road crash costs.

NARCIS (Netherlands)

2010-01-01

Road crashes result in all kinds of social costs, such as medical costs, production loss, human losses, property damage, settlement costs and costs due to congestion. Studies into road crash costs and their trends are carried out quite regularly. In 2009, the costs amounted to € 12.5 billion, or

Tyre and road wear prediction

NARCIS (Netherlands)

Lupker, H.A.

2003-01-01

Both tyre wear and road polishing are complex phenomenon, which are obviously strongly related; the energy that polishes the road is the energy that wears the tyre. The both depend non-linearly on numerous parameters, like materials used, vehicle and road usage, environmental conditions (i.e.

30 CFR 817.151 - Primary roads.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Primary roads. 817.151 Section 817.151 Mineral... roads. Primary roads shall meet the requirements of § 817.150 and the additional requirements of this section. (a) Certification. The construction or reconstruction of primary roads shall be certified in a...

Effect of natural ageing on volume stability of MSW and wood waste incineration residues

International Nuclear Information System (INIS)

Gori, Manuela; Bergfeldt, Britta; Reichelt, Jürgen; Sirini, Piero

2013-01-01

Highlights: ► Natural weathering on BA from MSW and wood waste incineration was evaluated. ► Type of mineral phases, pH and volume stability were considered. ► Weathering reactions effect in improved stability of the materials. - Abstract: This paper presents the results of a study on the effect of natural weathering on volume stability of bottom ash (BA) from municipal solid waste (MSW) and wood waste incineration. BA samples were taken at different steps of treatment (fresh, 4 weeks and 12 weeks aged) and then characterised for their chemical and mineralogical composition and for volume stability by means of the mineralogical test method (M HMVA-StB), which is part of the German quality control system for using aggregates in road construction (TL Gestein-StB 04). Changes of mineralogical composition with the proceeding of the weathering treatment were also monitored by leaching tests. At the end of the 12 weeks of treatment, almost all the considered samples resulted to be usable without restrictions in road construction with reference to the test parameter volume stability

Application of Artificial Intelligence in Prediction of Road Freight Transportation

OpenAIRE

Bogna Mrowczynska; Maria Ciesla; Aleksander Krol; Aleksander Sladkowski

2017-01-01

Road freight transport often requires the prediction of volume. Such knowledge is necessary to capture trends in the industry and support decision making by large and small trucking companies. The aim of the presented work is to demonstrate that application of some artificial intelligence methods can improve the accuracy of the forecasts. The first method employed was double exponential smoothing. The modification of this method has been proposed. Not only the parameters but also the initial ...

In–Service Road Safety Audits

Directory of Open Access Journals (Sweden)

A. Mendoza–Díaz

2009-04-01

Full Text Available A road safety audit is a formal analysis that seeks to guarantee that an existing or future road fulfills optimal safety criteria, conducted by a team of experts who se members are independent of the road project. It can be carried out in one, several or all of the stages of the project (planning, design, construction, before opening the road to traffic, and operation. The development and implementation of a road safety audit process is one of the strategies that have been applied in Mexico in recent years to reduce road accidents and their associated consequences. The objective of this work is to present the procedures that have been developed and applied in Mexico, as well as the benefits and problems that have been encountered. The application of those procedures to a specific case is also shown. Emphasis is made in the audit of high ways in the operation stage, which is the type that greater application and development has had in Mexico.

Road weather information for travelers : improving road weather messages and dissemination methods.

Science.gov (United States)

2010-01-01

The Federal Highway Administration (FHWA) Road Weather Management Program (RWMP) recently completed a study titled Human Factors Analysis of Road Weather Advisory and Control Information (Publication No. FHWAJPO- 10-053). The goal of the study was to...

Solutions to Improve Road Circulation in the Pitesti City Based on Analysis-Diagnostics of Road Traffic

Science.gov (United States)

Vîlcan, A.; Neagu, E.; Badarau Suster, H.; Boroiu, A. A.

2017-10-01

Road traffic congestion has become a daily phenomenon in the central area of Pitesti in the peak traffic periods. In order to achieve the mobility plan of Pitesti, an important stage is the diagnostic analysis of the road traffic. For this purpose, the urban road network was formalized through a graph containing the most important 40 intersections and traffic measurements were made at all these intersections and on the main roads connecting the peri-urban area. The data obtained by traffic macrosimulation confirmed the overloading of the street network during peak traffic hours and the analyzes made for various road traffic organization scenarios have shown that there are sustainable solutions for urban mobility only if the road network is fundamentally reconfigured (a belt outside the city and a median ring). Thus, the necessity of realizing the road passage in the Prundu neighbourhood and the finishing of the city belt by realizing the “detour West” of the city is argued. The importance of the work is that it brings scientific arguments for the realization of these road infrastructure projects, integrated in the urban mobility plan, which will base the development strategy of the Pitesti municipality.

Liquefied natural gas as a transportation fuel for heavy-duty trucks: Volume I

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This document contains Volume 1 of a three-volume manual designed for use with a 2- to 3-day liquefied natural gas (LNG) training course. Transportation and off-road agricultural, mining, construction, and industrial applications are discussed. This volume provides a brief introduction to the physics and chemistry of LNG; an overview of several ongoing LNG projects, economic considerations, LNG fuel station technology, LNG vehicles, and a summary of federal government programs that encourage conversion to LNG.

25 CFR 265.3 - Roads prohibited.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Roads prohibited. 265.3 Section 265.3 Indians BUREAU OF... ON INDIAN RESERVATIONS § 265.3 Roads prohibited. (a) Within the boundaries of this officially... highways, roads, truck trails, work roads, and all other types of ways constructed to make possible the...

DEVELOPMENT OF CARGO TRANSPORTATION SYSTEM BY ROAD ON THE BASIS OF LOGISTICS PRINCIPLES

Directory of Open Access Journals (Sweden)

I. M. Tsarenkova

2017-10-01

Full Text Available Рurpose. The article is aimed to develop and adapt the theoretical and methodological foundations for improving logistics system of cargo delivery by road transport in the framework of the scientific support of formation processes of transport-logistical system of the country. Methodology. The theory of system functioning control requires formalization of connections within the system. The qualitative and quantitative characteristics of entity were performed and the regularities of elements interaction in the system of road goods transportation were found out. The role of the road in transport industry and the influence of transportation and logistics space on the road itself in the process of its functioning were clarified. In the study of this topic the system approach, methods of synthesis and rational problem solving, theory of mass service were used. Findings. The work presents the highway as an element of the cargo transportation system that will make it possible to increase its economic efficiency in a constantly changing environment of transportation and logistics space according to the chosen criterion, the lower total costs to promote material flow. Theoretical-methodological bases of perfection of logistics system of cargo delivery by road transport include substantiation for the use of logistics as an effective control element to reduce the costs associated with goods transportation. They are distinguished by the presence of evidence-based methods for calculating the timing and sequence of execution of road works, logistic integration involved in the carriage of goods of the enterprises, structure and volume of material and accompanying flows and the formation of the logistics chain of its promotion. Originality. The road is represented by the link of single integral process of creation and management of the material flows. We propose formation of sub-system of the elements of road and transportation components with their further

Opportunities of forest roads usage as emergency access road for natural disaster

Directory of Open Access Journals (Sweden)

Can Vatandaşlar

2016-07-01

Full Text Available This study was carried out to examine the applicability of forest roads as emergency access and evacuation corridor for an alternative to motorways following a prospective earthquake in İstanbul. For this purpose, various disaster scenarios were created in the district of Beykoz and the shortest routes between critical points were determined through network analysis in Geographic Information System (GIS. Results indicated that access was possible between Beykoz city center and shelter, hospital, fire station, disaster management center, and military area via forest roads even if motorways became unusable. However, distance generally got longer and time of arrival increased on the routes of forest road. The increase in time of arrival was attributed to decrease in average cruising speed in addition to the increase in distance. This limitation can be overcome by enhancing the geometric standards of forest roads and completing superstructure operations. Results are important for revealing that forest roads can be used in other fields besides forestry activities, they can strengthen decision support system of managers, and enable first aid crew to reach the scene in the minimal time.

Noise Costs from Road Transport

Science.gov (United States)

Margorínová, Martina; Trojanová, Mária; Decký, Martin; Remišová, Eva

2018-06-01

Building and improving road infrastructure in Slovakia is currently influenced by the amount of state funding. Therefore, it is necessary to determine the effectiveness of each proposed solution of road project, which is based on life-cycle costs. Besides capital costs, social costs are also important, which valued the negative impacts due to road construction and operation on road users, the environment, and the population living in the affected area. Some components of social costs have shortcomings in quantifying and valuating, which need to be resolved. The one of important components which affects human health and the value of an area, and have some shortcomings are noise costs. Improvement of this component will lead to more accurate valuation of economic efficiency of roads.

Dietary supplement usage and motivation in Brazilian road runners.

Science.gov (United States)

Salgado, José Vítor Vieira; Lollo, Pablo Christiano Barboza; Amaya-Farfan, Jaime; Chacon-Mikahil, Mara PatríciaTraina

2014-01-01

The consumption of dietary supplements is highest among athletes and it can represent potential a health risk for consumers. The aim of this study was to determine the prevalence of consumption of dietary supplements by road runners. We interviewed 817 volunteers from four road races in the Brazilian running calendar. The sample consisted of 671 male and 146 female runners with a mean age of 37.9 ± 12.4 years. Of the sample, 28.33% reported having used some type of dietary supplement. The main motivation for this consumption is to increase in stamina and improve performance. The probability of consuming dietary supplements increased 4.67 times when the runners were guided by coaches. The consumption of supplements was strongly correlated (r = 0.97) with weekly running distance, and also highly correlated (r = 0.86) with the number of years the sport had been practiced. The longer the runner had practiced the sport, the higher the training volume and the greater the intake of supplements. The five most frequently cited reasons for consumption were: energy enhancement (29.5%), performance improvement (17.1%), increased level of endurance (10.3%), nutrient replacement (11.1%), and avoidance of fatigue (10.3%). About 30% of the consumers declared more than one reason for taking dietary supplements. The most consumed supplements were: carbohydrates (52.17%), vitamins (28.70%), and proteins (13.48%). Supplement consumption by road runners in Brazil appeared to be guided by the energy boosting properties of the supplement, the influence of coaches, and the experience of the user. The amount of supplement intake seemed to be lower among road runners than for athletes of other sports. We recommend that coaches and nutritionists emphasise that a balanced diet can meet the needs of physically active people.

IMPROVEMENT OF ROAD-HOLDING ABILITY FOR “BELARUS” TRACTORS

Directory of Open Access Journals (Sweden)

V. P. Boikov

2016-01-01

Full Text Available Introduction of new efficient braking systems for energy-packed tractors is of great importance for agricultural production. Foreign tractor manufacturing companies are implementing brake systems and in addition to their main function they fulfil function for holding of the given driving direction. The paper considers achievements in the field of electronic systems for tractor road-holding ability. A diagram on proportion of high-power tractors in total export volume of tractors and machinery manufactured in Belarus in the period of 2007–2010 has been drawn in the paper. The paper also proposes a comparative diagram on tractor speeds of international manufacturers which can serve as indicators of speed and road-holding ability of tractors with special electronic systems and without them. The paper contains an analysis of various braking mechanisms of planetary gears and detailed description of their design. A scheme of a laboratory facility for investigation of planetary gear usage as a breaking mechanism while changing conditions of jamming has been presented in the paper. The paper provides description on graph dependencies of current strength and voltage on as a function of the braking torque which is applied to a planetary gear. Nowadays energy-packed “Belarus”-tractors of Class 5 do not have a separate braking for each of four wheels. Therefore, it is proposed to use planetary gearbox of the rear-axle drive being available in every wheel as the basis of a service brake with the purpose to implement the described design. Using such scheme it is possible to execute an introduction of electronic systems for road-holding ability. A generalized scheme of an electronic system for tractor road-holding ability which can ensure separate breaking of all tractor wheels has been drawn out on the basis of the existing automotive electronic systems.

Dental enamel cells express functional SOCE channels.

Science.gov (United States)

Nurbaeva, Meerim K; Eckstein, Miriam; Concepcion, Axel R; Smith, Charles E; Srikanth, Sonal; Paine, Michael L; Gwack, Yousang; Hubbard, Michael J; Feske, Stefan; Lacruz, Rodrigo S

2015-10-30

Dental enamel formation requires large quantities of Ca(2+) yet the mechanisms mediating Ca(2+) dynamics in enamel cells are unclear. Store-operated Ca(2+) entry (SOCE) channels are important Ca(2+) influx mechanisms in many cells. SOCE involves release of Ca(2+) from intracellular pools followed by Ca(2+) entry. The best-characterized SOCE channels are the Ca(2+) release-activated Ca(2+) (CRAC) channels. As patients with mutations in the CRAC channel genes STIM1 and ORAI1 show abnormal enamel mineralization, we hypothesized that CRAC channels might be an important Ca(2+) uptake mechanism in enamel cells. Investigating primary murine enamel cells, we found that key components of CRAC channels (ORAI1, ORAI2, ORAI3, STIM1, STIM2) were expressed and most abundant during the maturation stage of enamel development. Furthermore, inositol 1,4,5-trisphosphate receptor (IP3R) but not ryanodine receptor (RyR) expression was high in enamel cells suggesting that IP3Rs are the main ER Ca(2+) release mechanism. Passive depletion of ER Ca(2+) stores with thapsigargin resulted in a significant raise in [Ca(2+)]i consistent with SOCE. In cells pre-treated with the CRAC channel blocker Synta-66 Ca(2+) entry was significantly inhibited. These data demonstrate that enamel cells have SOCE mediated by CRAC channels and implicate them as a mechanism for Ca(2+) uptake in enamel formation.

24 CFR 1710.210 - Roads.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Roads. 1710.210 Section 1710.210... (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements § 1710.210 Roads. (a) State the estimated cost to the developer of the proposed road system. (b) If the developer is to...

14 CFR 151.89 - Roads.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Roads. 151.89 Section 151.89 Aeronautics... AID TO AIRPORTS Project Programming Standards § 151.89 Roads. (a) Federal-aid Airport Program funds may not be used to resolve highway problems. Only those airport entrance roads that are definitely...

24 CFR 1710.110 - Roads.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Roads. 1710.110 Section 1710.110... (INTERSTATE LAND SALES REGISTRATION PROGRAM) LAND REGISTRATION Reporting Requirements § 1710.110 Roads. (a) Access to the subdivision. (1) Is access to the subdivision provided by public or private roads? What...

Sources of hydrocarbons in urban road dust: Identification, quantification and prediction.

Science.gov (United States)

Mummullage, Sandya; Egodawatta, Prasanna; Ayoko, Godwin A; Goonetilleke, Ashantha

2016-09-01

Among urban stormwater pollutants, hydrocarbons are a significant environmental concern due to their toxicity and relatively stable chemical structure. This study focused on the identification of hydrocarbon contributing sources to urban road dust and approaches for the quantification of pollutant loads to enhance the design of source control measures. The study confirmed the validity of the use of mathematical techniques of principal component analysis (PCA) and hierarchical cluster analysis (HCA) for source identification and principal component analysis/absolute principal component scores (PCA/APCS) receptor model for pollutant load quantification. Study outcomes identified non-combusted lubrication oils, non-combusted diesel fuels and tyre and asphalt wear as the three most critical urban hydrocarbon sources. The site specific variabilities of contributions from sources were replicated using three mathematical models. The models employed predictor variables of daily traffic volume (DTV), road surface texture depth (TD), slope of the road section (SLP), effective population (EPOP) and effective impervious fraction (EIF), which can be considered as the five governing parameters of pollutant generation, deposition and redistribution. Models were developed such that they can be applicable in determining hydrocarbon contributions from urban sites enabling effective design of source control measures. Copyright © 2016 Elsevier Ltd. All rights reserved.

Kilburn High Road Revisited

Directory of Open Access Journals (Sweden)

Cristina Capineri

2016-07-01

Full Text Available Drawing on John Agnew’s (1987 theoretical framework for the analysis of place (location, locale and sense of place and on Doreen Massey’s (1991 interpretation of Kilburn High Road (London, the contribution develops an analysis of the notion of place in the case study of Kilburn High Road by comparing the semantics emerging from Doreen Massey’s interpretation of Kilburn High Road in the late Nineties with those from a selection of noisy and unstructured volunteered geographic information collected from Flickr photos and Tweets harvested in 2014–2015. The comparison shows how sense of place is dynamic and changing over time and explores Kilburn High Road through the categories of location, locale and sense of place derived from the qualitative analysis of VGI content and annotations. The contribution shows how VGI can contribute to discovering the unique relationship between people and place which takes the form given by Doreen Massey to Kilburn High Road and then moves on to the many forms given by people experiencing Kilburn High Road through a photo, a Tweet or a simple narrative. Finally, the paper suggests that the analysis of VGI content can contribute to detect the relevant features of street life, from infrastructure to citizens’ perceptions, which should be taken into account for a more human-centered approach in planning or service management.

Road Nail: Experimental Solar Powered Intelligent Road Marking System

Science.gov (United States)

Samardžija, Dragan; Teslić, Nikola; Todorović, Branislav M.; Kovač, Erne; Isailović, Đorđe; Miladinović, Bojan

2012-03-01

Driving in low visibility conditions (night time, fog or heavy precipitation) is particularly challenging task with an increased probability of traffic accidents and possible injuries. Road Nail is a solar powered intelligent road marking system of wirelessly networked signaling devices that improve driver safety in low visibility conditions along hazardous roadways. Nails or signaling devices are autonomous nodes with capability to accumulate energy, exchange wireless messages, detect approaching vehicles and emit signalization light. We have built an experimental test-bed that consists of 20 nodes and a cellular gateway. Implementation details of the above system, including extensive measurements and performance evaluations in realistic field deployments are presented. A novel distributed network topology discovery scheme is proposed which integrates both sensor and wireless communication aspects, where nodes act autonomously. Finally, integration of the Road Nail system with the cellular network and the Internet is described.

PROPOSAL OF VOIVODESHIP ROAD SAFETY IMPROVEMENT PROGRAMME

Directory of Open Access Journals (Sweden)

Tomasz SZCZURASZEK

2016-07-01

Full Text Available The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the Personnel Continuing Education, the Hazardous Road Behaviour Monitoring, the Social Education for Safe Behaviour on Road, the Teaching Personnel Improvement, the Area Development and Planning Process Improvement, the Road Infrastructure Design Quality Improvement, and the Road and Traffic Management Process Efficiency Improvement. The basic aim of each system has been discussed as well as the most important tasks implemented as its part. The Road Safety Improvement Programme for the Kujawsko-Pomorskie Voivodeship presented in this article is a part of the National Road Safety Programme 2013-2020. Moreover, it is not only an original programme in Poland, but also a universal project that may be adapted for other voivodeships as well.

Do roads reduce painted turtle (Chrysemys picta populations?

Directory of Open Access Journals (Sweden)

Alexandra Dorland

Full Text Available Road mortality is thought to be a leading cause of turtle population decline. However, empirical evidence of the direct negative effects of road mortality on turtle population abundance is lacking. The purpose of this study was to provide a strong test of the prediction that roads reduce turtle population abundance. While controlling for potentially confounding variables, we compared relative abundance of painted turtles (Chrysemys picta in 20 ponds in Eastern Ontario, 10 as close as possible to high traffic roads (Road sites and 10 as far as possible from any major roads (No Road sites. There was no significant effect of roads on painted turtle relative abundance. Furthermore, our data do not support other predictions of the road mortality hypothesis; we observed neither a higher relative frequency of males to females at Road sites than at No Road sites, nor a lower average body size of turtles at Road than at No Road sites. We speculate that, although roads can cause substantial adult mortality in turtles, other factors, such as release from predation on adults and/or nests close to roads counter the negative effect of road mortality in some populations. We suggest that road mitigation for painted turtles can be limited to locations where turtles are forced to migrate across high traffic roads due, for example, to destruction of local nesting habitat or seasonal drying of ponds. This conclusion should not be extrapolated to other species of turtles, where road mortality could have a larger population-level effect than on painted turtles.

Do roads reduce painted turtle (Chrysemys picta) populations?

Science.gov (United States)

Dorland, Alexandra; Rytwinski, Trina; Fahrig, Lenore

2014-01-01

Road mortality is thought to be a leading cause of turtle population decline. However, empirical evidence of the direct negative effects of road mortality on turtle population abundance is lacking. The purpose of this study was to provide a strong test of the prediction that roads reduce turtle population abundance. While controlling for potentially confounding variables, we compared relative abundance of painted turtles (Chrysemys picta) in 20 ponds in Eastern Ontario, 10 as close as possible to high traffic roads (Road sites) and 10 as far as possible from any major roads (No Road sites). There was no significant effect of roads on painted turtle relative abundance. Furthermore, our data do not support other predictions of the road mortality hypothesis; we observed neither a higher relative frequency of males to females at Road sites than at No Road sites, nor a lower average body size of turtles at Road than at No Road sites. We speculate that, although roads can cause substantial adult mortality in turtles, other factors, such as release from predation on adults and/or nests close to roads counter the negative effect of road mortality in some populations. We suggest that road mitigation for painted turtles can be limited to locations where turtles are forced to migrate across high traffic roads due, for example, to destruction of local nesting habitat or seasonal drying of ponds. This conclusion should not be extrapolated to other species of turtles, where road mortality could have a larger population-level effect than on painted turtles.

EDITORIAL ROAD SAFETY IN KENYA

African Journals Online (AJOL)

data for the purpose of legal prosecution and insurance claims. The accident data P41 form filled at the Police Stations are collated and forwarded to the Roads Department, Ministry of Roads and Public. Works for further processing and analysis (1, 12). The. Roads Department analyses the information in order to determine:.

Road-surface properties affecting rates of energy dissipation from vehicles

Energy Technology Data Exchange (ETDEWEB)

Igwe, E.A. [Department of Civil Engineering, Rivers State University of Science and Technology, Port Harcourt, P.M.B 5080, Rivers State (Nigeria); Ayotamuno, M.J.; Okparanma, R.N. [Department of Agricultural and Environmental Engineering, Rivers State University of Science and Technology, Port Harcourt, P.M.B 5080, Rivers State (Nigeria); Ogaji, S.O.T.; Probert, S.D. [School of Engineering, Cranfield University, Bedfordshire Mk43 OAL (United Kingdom)

2009-09-15

The rates of energy that moving vehicles dissipate to road surfaces as well as noise emissions and their propensities for pitting (and hence their repair costs per year) all depend upon the structural properties of these surfaces. Thus, to increase the strength of bituminous concrete (i.e. a typical flexible road-surface) has been one of the major recent aims in highway engineering. The present study explored techniques that will increase these strength properties by modifying the material, using rubber latex, through rubberization and hence, improve the strength of the flexible trafficked surface when in contact with vehicles. At the optimal design asphalt (i.e. bitumen) content of 4.68%, the successive addition of various percentages of the rubber latex produced a design value of 1.65% rubber content, which increased the stability of the roadway from 1595 to 2639 N (i.e. an 65.5% increase) and the density from 2447 to 2520.8 kg/m{sup 3} (i.e. a 3.02% increase). This shows that the addition of rubber latex to bituminous concrete (a flexible road-surface) increased sustainability and the strength (in terms of stability and density). Similarly, the air voids and voids in the mineral aggregate (VMA) were reduced by introducing latex from 4.22% to 3.45% (i.e. a 17.06% reduction) and 16.25% to 13.43% (i.e. an 17.4% reduction), respectively. Whereas, the reduction in voidage volume added strength to the bituminous concrete by increasing its stability and density, the reduction in VMA had no positive impact on the strength properties of the flexible road-surface. (author)

Future Roads Near Streams

Data.gov (United States)

U.S. Environmental Protection Agency — Roads are a source of auto related pollutants (e.g. gasoline, oil and other engine fluids). When roads are near streams, rain can wash these pollutants directly into...

Road Maintenance in Africa: Approaches and Perspectives

Directory of Open Access Journals (Sweden)

M Mostafa Hassan

2018-01-01

Full Text Available In Africa, roads are the dominant mode of passenger and freight transport, for which the need is growing rapidly. It is noticeable that most of the African countries do not do enough to ensure the sustainability of road infrastructure as it has been widely reported that roads are affected, to varying degrees, by premature deterioration. Most of the African countries have adopted institutional reforms, notably entailing the creation of road funds and road agencies, and made significant progress on road maintenance. However, many challenges remain to be addressed in all of them to ensure appropriate maintenance. Although spending on road maintenance has increased over time in all African countries it remains insufficient to cover the needs. Poorly maintained roads constrain mobility, significantly raise vehicle operating costs, increase accident rates and their associated human and property costs, and aggravate isolation, poverty, poor health, and illiteracy in rural communities. This paper focuses, in particular, on road maintenance in some African countries considering types of road maintenance and the different approaches aiming at a comparison to reflect on similarities and differences.

Road Maintenance in Africa: Approaches and Perspectives

Science.gov (United States)

M, Mostafa Hassan

2018-06-01

In Africa, roads are the dominant mode of passenger and freight transport, for which the need is growing rapidly. It is noticeable that most of the African countries do not do enough to ensure the sustainability of road infrastructure as it has been widely reported that roads are affected, to varying degrees, by premature deterioration. Most of the African countries have adopted institutional reforms, notably entailing the creation of road funds and road agencies, and made significant progress on road maintenance. However, many challenges remain to be addressed in all of them to ensure appropriate maintenance. Although spending on road maintenance has increased over time in all African countries it remains insufficient to cover the needs. Poorly maintained roads constrain mobility, significantly raise vehicle operating costs, increase accident rates and their associated human and property costs, and aggravate isolation, poverty, poor health, and illiteracy in rural communities. This paper focuses, in particular, on road maintenance in some African countries considering types of road maintenance and the different approaches aiming at a comparison to reflect on similarities and differences.

Rapid road repair vehicle

Science.gov (United States)

Mara, Leo M.

1998-01-01

Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find an the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was was heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past.

Competitiveness in Road Transport

DEFF Research Database (Denmark)

Borgström, Benedikte; Gammelgaard, Britta; Bruun, Poul

Road transport is an important sector, connecting time and space of production and consumption. Its market conditions has changed. The EU single market implementation has increased price pressure due to supply of low cost road freight transport from counties with lower cost structures. Changes...... in the market also encourage strategic development of some road hauliers into providers of unique services. Such road haulier strategic development contributes to efficiency and effectiveness in basically all business sectors of EU. Little research is available of such strategic and operational management....... In this paper we will explore that knowledge gap and analyze what value proposition(s) and capabilities can transform potential cost disadvantages of acting in a market that includes both high- and low-cost-country actors? And in conceptual terminology, how are capabilities deployed and developed to construct...

An Evaluation of Forest Road Standards and Road Gradients in Turkey in View of FAO Criteria and Some EU Practices

Directory of Open Access Journals (Sweden)

Sadık Çağlar

2009-04-01

Full Text Available Forest roads are one of the inevitable infrastructures in conducting forestry operations. Around 1000 km under standardized forest roads have been largely repaired in addition to construction of 1000 km new forest roads in Turkey. Implementing uniform road gradient along the road sections is very important in terms of transportation techniques and safety, as well as the geometrical standardizations of the forest road. In this study, current road standards, longitudinal gradient values and their limitations in forest road constructions recommended by Food and Agriculture Organization of the United Nations (FAO and some Europe Union (EU countries were examined. Firstly, the forest road standards and their gradient values have been defined in Turkish forest road construction practices. Afterwards, the forest road standards and the gradient values applied by FAO and some EU countries were presented, and finally, the specifications were examined by comparing them with the current practices in Turkish forestry.

Impacts of traffic composition and street-canyon geometry on on-road air quality in a high-rise building area

Science.gov (United States)

Kwak, Kyung-Hwan; Kim, Kyung Hwan; Lee, Seung-Bok; Woo, Sung Ho; Bae, Gwi-Nam; Sunwoo, Young; Baik, Jong-Jin

2016-04-01

Mobile measurements using a mobile laboratory and numerical simulations using a computational fluid dynamics (CFD) model were conducted over different time periods of multiple days in a high-rise building area, Seoul, Republic of Korea. Mobile measurement can provide actual on-road emission levels of air pollutants from vehicles as well as validation dataset of a CFD model. On the other hand, CFD modeling is required for the process analysis of mobile measurement data and the quantitative estimation of determining factors in complex phenomena. The target area is characterized as a busy street canyon elongated along a major road with hourly traffic volumes of approximately 4000 vehicles during working hours on weekdays. Nitrogen oxides (NOx), black carbon (BC), particle-bound polycyclic aromatic hydrocarbons (pPAH), and particle number (PN) concentrations were measured during 39 round trips of mobile laboratory. The associations of the measured NOx, BC, pPAH, and PN concentrations with the traffic volumes of individual compositions are analyzed by calculating the correlation coefficients (R2) based on linear regressions. It is found that SUV, truck, van, and bus are heavy emitters responsible for the on-road air pollution in the street canyon. Among the measured pollutants, the largest R2 is shown for pPAH. The measured NOx, BC, pPAH, and PN concentrations are unevenly distributed in the street canyon. The measured concentrations around an intersection are higher than those in between intersections, particularly for NOx and pPAH. The CFD modeling for different dispersion scenarios reveals that the intersection has counterbalancing roles in determining the on-road concentrations. The emission process acts to increase the on-road concentrations due to accelerating and idling vehicles, whereas the dispersion process acts to decrease the on-road concentrations due to lateral ventilations along the crossing street. It is needed to control the number of heavy emitters and

Road safety and road traffic accidents in Saudi Arabia

OpenAIRE

Mansuri, Farah A.; Al-Zalabani, Abdulmohsen H.; Zalat, Marwa M.; Qabshawi, Reem I.

2015-01-01

Objectives: To identify the changing trends and crucial preventive approaches to road traffic accidents (RTAs) adopted in the Kingdom of Saudi Arabia (KSA) over the last 2.5 decades, and to analyze aspects previously overlooked. Methods: This systematic review was based on evidence of RTAs in KSA. All articles published during the last 25 years on road traffic accident in KSA were analyzed. This study was carried out from December 2013 to May 2014 in the Department of Family and Community Med...

Drawing Road Networks with Mental Maps.

Science.gov (United States)

Lin, Shih-Syun; Lin, Chao-Hung; Hu, Yan-Jhang; Lee, Tong-Yee

2014-09-01

Tourist and destination maps are thematic maps designed to represent specific themes in maps. The road network topologies in these maps are generally more important than the geometric accuracy of roads. A road network warping method is proposed to facilitate map generation and improve theme representation in maps. The basic idea is deforming a road network to meet a user-specified mental map while an optimization process is performed to propagate distortions originating from road network warping. To generate a map, the proposed method includes algorithms for estimating road significance and for deforming a road network according to various geometric and aesthetic constraints. The proposed method can produce an iconic mark of a theme from a road network and meet a user-specified mental map. Therefore, the resulting map can serve as a tourist or destination map that not only provides visual aids for route planning and navigation tasks, but also visually emphasizes the presentation of a theme in a map for the purpose of advertising. In the experiments, the demonstrations of map generations show that our method enables map generation systems to generate deformed tourist and destination maps efficiently.

Optimizing transport logistics taking into account the state of roads and road traffic

Directory of Open Access Journals (Sweden)

Shikul’skaya Ol’ga Mikhaylovna

2015-12-01

Full Text Available The choice and use of rational routes at strict observance of deliveries terms help to achieve not only minimization of operational expenses, but also to reduce commodity and production stocks in warehouses by 1,5...2 times. Therefore special relevance is gained by the works allowing precisely calculating the volumes of a cargo transportation, to count the quantity of transport units necessary for providing cargo flow, to define the rational routes of transportation, and also to reduce total costs of transportation. On the basis of the analysis of the known mathematical methods applied in transport logistics, the authors drew a conclusion that the route of freight delivery is estimated according to the distance passed by the vehicle. However the time of freight delivery depends not only on distance, but also on a set of other factors, such as vehicle type, road capacity, intensity of transport stream, weather conditions, season and others. For taking note of additional factors when optimizing a freight delivery route the method of analogy and similarity is used by the authors. The transportation parameters were estimated by analogy with an electric chain. For this purpose the authors entered the new concepts “fictitious distance” and “conductivity of the road”. The mathematical model allowing optimizing the organization of freight delivery taking into account not only distances, but also the probable speed of the vehicle movement depending on the road quality, intensity of transport stream and weather conditions is developed. Further development of the system of decision-making support while choosing the optimum route of cargo delivery is planned.

Road accident fatality risks for "vulnerable" versus "protected" road users in northern Ghana.

Science.gov (United States)

Damsere-Derry, James; Palk, Gavan; King, Mark

2017-10-03

Road traffic injuries (RTIs) are a serious epidemic that claims more than a million lives across the globe each year. The burden of RTIs is particularly pronounced in Africa and other low- and middle-income countries. The unfavorable disparity of the burden of road trauma in the world is largely attributable to unsafe vehicles, lack of appropriate road infrastructure, and the predominance of vulnerable road users (VRUs) in developing countries. However, little research exists in northern Ghana to highlight the scale and risk of death among road users. The objective of this research was to establish the relative risk of death among road users in northern Ghana. Crash data from police reports between 2007 and 2011 were analyzed for the Upper Regions of Ghana. Conditional probabilities and multivariable logistic regression techniques were used to report proportions and adjusted odds ratios (AORs), respectively. Generally, crashes in northern Ghana were extremely severe; that is, 35% of all injury related collisions were fatal. The proportion of fatal casualties ranged between 21% among victims of sideswipe collisions and 41% among pedestrians and victims of rear-end collisions. Though males were 6 times more likely to die than females overall, females were more likely to die as pedestrians (90% of all female casualty deaths) and males were more likely to die as riders/drivers (78% of all male casualty deaths). Pedestrians were 3 times more likely to die (odds ratio [OR] = 3.1; 95% confidence interval [CI], 2.4 to 4.1) compared with drivers/riders. Compared with drivers, the odds of death among cyclists was about 4 times higher (AOR = 3.6; 95% CI, 2.3 to 5.6) and about 2 times higher among motorcyclists (AOR = 1.6; 95% CI, 1.2 to 2.2). Compared with casualties aged between 30 and 59 years, children under 10 years and those aged 60 years and above were independently 2 times more likely to die in traffic collisions. Provision of requisite road infrastructure is vital

Factors Affecting the Location of Road Emergency Bases in Iran Using Analytical Hierarchy Process (AHP).

Science.gov (United States)

Bahadori, Mohammadkarim; Hajebrahimi, Ahmad; Alimohammadzadeh, Khalil; Ravangard, Ramin; Hosseini, Seyed Mojtaba

2017-10-01

To identify and prioritize factors affecting the location of road emergency bases in Iran using Analytical Hierarchy Process (AHP). This was a mixed method (quantitative-qualitative) study conducted in 2016. The participants in this study included the professionals and experts in the field of pre-hospital and road emergency services issues working in the Health Deputy of Iran Ministry of Health and Medical Education, which were selected using purposive sampling method. In this study at first, the factors affecting the location of road emergency bases in Iran were identified using literature review and conducting interviews with the experts. Then, the identified factors were scored and prioritized using the studied professionals and experts' viewpoints through using the analytic hierarchy process (AHP) technique and its related pair-wise questionnaire. The collected data were analyzed using MAXQDA 10.0 software to analyze the answers given to the open question and Expert Choice 10.0 software to determine the weights and priorities of the identified factors. The results showed that eight factors were effective in locating the road emergency bases in Iran from the viewpoints of the studied professionals and experts in the field of pre-hospital and road emergency services issues, including respectively distance from the next base, region population, topography and geographical situation of the region, the volume of road traffic, the existence of amenities such as water, electricity, gas, etc. and proximity to the village, accident-prone sites, University ownership of the base site, and proximity to toll-house. Among the eight factors which were effective in locating the road emergency bases from the studied professionals and experts' perspectives, "distance from the next base" and "region population" were respectively the most important ones which had great differences with other factors.

Experimental study of water fluxes in a residential area: 2. Road infiltration, runoff and evaporation

Science.gov (United States)

Ragab, R.; Rosier, P.; Dixon, A.; Bromley, J.; Cooper, J. D.

2003-08-01

Lack of accurate data has led some hydrologists and city planners to assume that urban infiltration is zero and runoff is 100% of the rainfall. These assumptions lead to an over estimation of road runoff volume and an underestimation of direct recharge to groundwater, which is already rising under some UK cities. This study investigates infiltration and runoff processes and quantifies the percentage of rainfall that contributes to storm drainage, and that which infiltrates through different types of road surface. Access tubes were installed for measuring soil water content using a neutron probe in three car parks, a road and a grass site at the Centre for Ecology and Hydrology, Crowmarsh Gifford, Wallingford. Storm drainage was recorded at the exit of the Thamesmead Estate in Crowmarsh Gifford, just before the drain joins the River Thames at Wallingford. Rainfall and water table depth were also recorded. Weekly measurements of soil moisture content indicated that the top 40 cm layer is not influenced by water-table fluctuations and, therefore, positive changes in soil moisture could be attributed to infiltration of rainfall through the surface. Depending on the nature of the surface, subsurface layers, level of traffic, etc., between 6 and 9% of rainfall was found to infiltrate through the road surfaces studied. The storm drainage generated by road runoff revealed a flow pattern similar to that of the receiving watercourse (River Thames) and increased with the increase of infiltration and soil water content below the road surface. The ratio of runoff to rainfall was 0·7, 0·9 and 0·5 for annual, winter (October-March) and summer (April-September) respectively. As the results of the infiltration indicated that 6 to 9% of annual rainfall infiltrates through the road surface, this means that evaporation represents, 21-24% of annual rainfall, with more evaporation taking place during summer than winter.

Overview of the neural network based technique for monitoring of road condition via reconstructed road profiles

CSIR Research Space (South Africa)

Ngwangwa, HM

2008-07-01

Full Text Available on the road and driver to assess the integrity of road and vehicle infrastructure. In this paper, vehicle vibration data are applied to an artificial neural network to reconstruct the corresponding road surface profiles. The results show that the technique...

Road design and environment : best practice on self-explaining and forgiving roads. Deliverable D3 of the RiPCORD-iSEREST project (Road Infrastructure Safety Protection - Core-Research and Development for Road Safety in Europe; Increasing safety and reliability of secondary roads for a sustainable Surface Transport).

NARCIS (Netherlands)

Matena, S. Louwerse, W. Schermers, G. Vaneerdewegh, P. Pokorny, P. Gaitanidou, L. Elvik, R. & Cardoso, J.

2009-01-01

Main objective of work-package 3 of Ripcord-lserest was to collect information on best practices concerning the design of self-explaining and forgiving roads. In order to gain an overview on existing practises on road categorisation and the layout of typical rural roads a questionnaire survey had

New innovative educational method to prevent accidents involving young road users (aged 15-24 – European Road Safety Tunes

Directory of Open Access Journals (Sweden)

Jankowska-Karpa Dagmara

2017-01-01

Full Text Available The article presents a new teaching method designed to improve road safety among young road users. Developed under “European Road Safety Tunes”, this international project was cofunded by EU DG MOVE. Its main aim is to improve road safety and minimize the number of road accidents, injuries and fatalities among road users who are 15-24 years old. The Safety Tunes method contains a series of workshops addressed to young vocational school students: cyclists, moped and motor riders and car drivers. The workshops incorporate peer and emotive education, and delivery of road safety related messages through different types of artistic forms. The topics tackled during class address awareness of possible risks and risk-behaviour, prevention of distraction and reduction in young fatalities and serious injuries on the road. All actions within the project are evaluated, both in terms of the impact of the workshops on students’ attitudes towards road safety problems and in terms of process assessment.

Analysis of Individual and Environmental Factors for Road Traffic Accidents in Sirjan-Bandarabbas Road between 2010 and 2011, Iran

Directory of Open Access Journals (Sweden)

Ghorbanali Mohammadi

2016-10-01

Full Text Available Sirjan -Bandarabbas road is one of the important commercial roads in Iran and for Sirjan’s area situation and relevance between Sirjan and other states in Iran so high percentage of goods that forwarded from Bandarabbas to other states transit from Sirjan .Therefore this road is as one important transition road and traffic road too .This study analyzed road traffic accidents were occurred between 2010 and 201in Sirjan- Bandarabbas road. Individual and demographic factors include Time of accidents, Drivers age, time of the days, seat belt and safety laws, Guilty vehicle, Mode of accident and education Level. Time of day analyses suggested that the highest percentage of road traffic injuries occurred in the time group between 12-18 hours. Drivers with the age group of 36-50 had more involvement in death accidents. The findings of this study also revealed that most of the collisions was front to back and front to side. Female drivers were found to be generally safer drivers than their male counterparts; male drivers had a higher involvement rate in road traffic accidents. This study indicated that Observe safety laws, Guilty vehicle and Mode of accidents have a meaningful relationship with Type of accidents in road traffic accidents in Sirjan Bandarabbas road.

RAIL TRAFFIC VOLUME ESTIMATION BASED ON WORLD DEVELOPMENT INDICATORS

Directory of Open Access Journals (Sweden)

Luka Lazarević

2015-08-01

Full Text Available European transport policy, defined in the White Paper, supports shift from road to rail and waterborne transport. The hypothesis of the paper is that changes in the economic environment influence rail traffic volume. Therefore, a model for prediction of rail traffic volume applied in different economic contexts could be a valuable tool for the transport planners. The model was built using common Machine Learning techniques that learn from the past experience. In the model preparation, world development indicators defined by the World Bank were used as input parameters.

Development and enhancement of road lighting principles

Energy Technology Data Exchange (ETDEWEB)

Ekrias, A.

2010-07-01

The work starts with a short introduction concerning the history of road lighting, outlining the trends and changes that have taken place in road lighting research during the past century. The introduction is followed by a review of trends, directions, and problems in current road lighting research and practice. The following part of the work introduces an advanced approach to road lighting measurements and calculations, based on the use of an imaging luminance photometer and the Road LumiMeter v2.0 computer program. The work sets out to investigate the variations in the characteristics of the quality of the road lighting at the same pilot locations in relation to the calculation methods used. In the work mesopic visual performance and the effects of the spectral transmittance of the vehicle windshield on the visibility conditions of the driver are also analysed. The work continues with road lighting measurements in various weather conditions in order to study the effects of snowy and wet road surface conditions on road lighting luminances. The results show that in Finland, snowy conditions offer very good opportunities to save electricity without adversely affecting either the safety of driving or the quality of road lighting. The following measurements set out to investigate the contribution of halogen and high-intensity discharge headlights to road lighting and whether this has a conflicting effect on the luminance contrasts of various targets located on the road or at the side of the road. The results indicate that, in general, the use of vehicle headlights in the presence of road lighting reduces the luminance contrasts of targets. The work continues with road lighting visibility experiments which study the visibility of achromatic and coloured targets in MH lamp and HPS lamp installations. The results show that colours have a major effect on target visibility if the road is illuminated with a light source with adequate colour rendering properties. Finally

Tourist Assessment of Croatian Roads

Directory of Open Access Journals (Sweden)

Joso Vurdelja

2012-10-01

Full Text Available As environmentally clean industry and as the most significantworld industry regarding the number of employees and theimpact on the social and economic development of a countTy,tourism represents an extremely important social and economicbranch for Croatia.As a functional unit of the mutually interweaving socialand economic relations, tourism is a complex phenomenonwhose development depends on a number of compatible factorsout of which the transport infrastructure is considered to bethe most obvious and almost the most significant one, i.e. thefirst among the equal. This is primarily true for road traffic infrastructure,since road trai!Sportation of tourists by passengercars, buses and motorcycles accounts for more than 90 percentof the overall tourist journeys in Croatia.The topic of this paper is precisely, among other things, thetourist assessment of the Croatian road network by means ofthe so-called econometric model regarding the contribution ofa certain road route to the overall tourist traffic.Practical implementation of the elaborated problematicshould result in the improvement of road infrastructure eitherby constructing new motonvays and/or roads, or by reconstructionand/or modernisation of the existing traffic routes.

Modeling and validation of on-road CO2 emissions inventories at the urban regional scale

International Nuclear Information System (INIS)

Brondfield, Max N.; Hutyra, Lucy R.; Gately, Conor K.; Raciti, Steve M.; Peterson, Scott A.

2012-01-01

On-road emissions are a major contributor to rising concentrations of atmospheric greenhouse gases. In this study, we applied a downscaling methodology based on commonly available spatial parameters to model on-road CO 2 emissions at the 1 × 1 km scale for the Boston, MA region and tested our approach with surface-level CO 2 observations. Using two previously constructed emissions inventories with differing spatial patterns and underlying data sources, we developed regression models based on impervious surface area and volume-weighted road density that could be scaled to any resolution. We found that the models accurately reflected the inventories at their original scales (R 2 = 0.63 for both models) and exhibited a strong relationship with observed CO 2 mixing ratios when downscaled across the region. Moreover, the improved spatial agreement of the models over the original inventories confirmed that either product represents a viable basis for downscaling in other metropolitan regions, even with limited data. - Highlights: ► We model two on-road CO 2 emissions inventories using common spatial parameters. ► Independent CO 2 observations are used to validate the emissions models. ► The downscaled emissions models capture the urban spatial heterogeneity of Boston. ► Emissions estimates show a strong non-linear relationship with observed CO 2 . ► Our study is repeatable, even in areas with limited data. - This work presents a new, reproducible methodology for downscaling and validating on-road CO 2 emissions estimates.

How Long Do the Dead Survive on the Road? Carcass Persistence Probability and Implications for Road-Kill Monitoring Surveys

OpenAIRE

Santos, Sara; Carvalho, Filipe; Mira, António

2011-01-01

Background: Road mortality is probably the best-known and visible impact of roads upon wildlife. Although several factors influence road-kill counts, carcass persistence time is considered the most important determinant underlying underestimates of road mortality. The present study aims to describe and model carcass persistence variability on the road for different taxonomic groups under different environmental conditions throughout the year; and also to assess the eff...

Using CART to segment road images

Science.gov (United States)

Davies, Bob; Lienhart, Rainer

2006-01-01

The 2005 DARPA Grand Challenge is a 132 mile race through the desert with autonomous robotic vehicles. Lasers mounted on the car roof provide a map of the road up to 20 meters ahead of the car but the car needs to see further in order to go fast enough to win the race. Computer vision can extend that map of the road ahead but desert road is notoriously similar to the surrounding desert. The CART algorithm (Classification and Regression Trees) provided a machine learning boost to find road while at the same time measuring when that road could not be distinguished from surrounding desert.

Amphipathic alpha-helices and putative cholesterol binding domains of the influenza virus matrix M1 protein are crucial for virion structure organisation.

Science.gov (United States)

Tsfasman, Tatyana; Kost, Vladimir; Markushin, Stanislav; Lotte, Vera; Koptiaeva, Irina; Bogacheva, Elena; Baratova, Ludmila; Radyukhin, Victor

2015-12-02

The influenza virus matrix M1 protein is an amphitropic membrane-associated protein, forming the matrix layer immediately beneath the virus raft membrane, thereby ensuring the proper structure of the influenza virion. The objective of this study was to elucidate M1 fine structural characteristics, which determine amphitropic properties and raft membrane activities of the protein, via 3D in silico modelling with subsequent mutational analysis. Computer simulations suggest the amphipathic nature of the M1 α-helices and the existence of putative cholesterol binding (CRAC) motifs on six amphipathic α-helices. Our finding explains for the first time many features of this protein, particularly the amphitropic properties and raft/cholesterol binding potential. To verify these results, we generated mutants of the A/WSN/33 strain via reverse genetics. The M1 mutations included F32Y in the CRAC of α-helix 2, W45Y and W45F in the CRAC of α-helix 3, Y100S in the CRAC of α-helix 6, M128A and M128S in the CRAC of α-helix 8 and a double L103I/L130I mutation in both a putative cholesterol consensus motif and the nuclear localisation signal. All mutations resulted in viruses with unusual filamentous morphology. Previous experimental data regarding the morphology of M1-gene mutant influenza viruses can now be explained in structural terms and are consistent with the pivotal role of the CRAC-domains and amphipathic α-helices in M1-lipid interactions. Copyright © 2015 Elsevier B.V. All rights reserved.

Road diet informational guide.

Science.gov (United States)

2014-11-01

A classic Road Diet converts an existing four-lane undivided roadway segment to a three-lane segment consisting of two : through lanes and a center two-way left turn lane (TWLTL). A Road Diet improves safety by including a protected left-turn lane : ...

ERGONOMICS AND ROAD SAFETY

NARCIS (Netherlands)

BROOKHUIS, K; BROWN, [No Value

1992-01-01

Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are

Exploring schema-driven differences in situation awareness between road users: an on-road study of driver, cyclist and motorcyclist situation awareness.

Science.gov (United States)

Salmon, Paul M; Lenne, Michael G; Walker, Guy H; Stanton, Neville A; Filtness, Ashleigh

2014-01-01

Collisions between different road users make a substantial contribution to road trauma. Although evidence suggests that different road users interpret the same road situations differently, it is not clear how road users' situation awareness differs, nor is it clear which differences might lead to conflicts. This article presents the findings from an on-road study conducted to examine driver, motorcyclist and cyclist situation awareness in different road environments. The findings suggest that, in addition to minor differences in the structure of different road users' situation awareness (i.e. amount of information and how it is integrated), the actual content of situation awareness in terms of road user schemata, the resulting interaction with the world and the information underpinning situation awareness is markedly different. Further examination indicates that the differences are likely to be compatible along arterial roads, shopping strips and at roundabouts, but that they may create conflicts between different road users at intersections. Interventions designed to support compatible situation awareness and behaviour between different road users are discussed.

A GIS Approach to Evaluate Infrastructure Variables Influencing the Occurrence of Traffic Accidents in Urban Roads

Directory of Open Access Journals (Sweden)

Murat Selim Çepni

2017-03-01

Full Text Available Several studies worldwide have been developed that seek to explain the occurrence of traffic accidents from different perspectives. The analyses have addressed legal perspectives, technical attributes of vehicles and infrastructure as well as the psychological, behavioral and socio-economic components of the road system users. Recently, some analysis techniques based on the use of Geographic Information Systems (GIS have been used, which allow the generation of spatial distribution maps, models and risk estimates from a spatial perspective. Sometimes analyses of traffic accidents are performed using quantitative statistical techniques, which place significant importance on the evolution of accidents. Studies such as those in references have shown that conventional statistical models are sometimes inadequate to model the frequency of traffic accidents, as they may provide erroneous inferences. GIS approach has been used to explore different spatial and temporal visualization technologies to reveal accident patterns and significant factors relating to vehicle crashes, or as a management system for accident analysis and the determination of hot spots. This paper examines the relationship between urban road accidents and variables related to road infrastructure, environment and traffic volumes. Some accident-prone sections in the city of Kocaeli are specifically identified by GIS tools. Urban road accidents in Kocaeli are a serious problem and it is believed that accidents can be related to infrastructure characteristics. The study aimed to establish the relationship between urban road accidents and the road infrastructure variables and revealed some possible accident prone locations for the period of 2013 and 2015 in Kocaeli city

Construction and maintenance of underground mine roads

Energy Technology Data Exchange (ETDEWEB)

Logan, A.S.; Seedsman, R.W. [Coffey Partners International Pty. Ltd. (Australia)

1995-12-31

Good roads are essential in moving men and materials to and from the underground workplace. An underground coal industry funded project was recently completed on underground mine road construction and maintenance. This paper discusses practical approaches to construction and maintenance of underground mine roads using transferable civil technologies and innovative techniques. Mine pavements are generally low-cost (relative to civil roads), constructed to varying standards using locally available materials to best meet the mobility needs of the mine. Performance of pavements is thus largely dependent on the environmental conditions, quality of the available road making materials, maintenance policies and available resources. This paper explains the causes of bad roads in various underground environments. It details available management strategies, construction and water control techniques, road maintenance and vehicle considerations. It concludes that the trend to larger rubber tires mining equipment needs to be matched with construction and maintenance of high quality road surfaces. For large operations, the total cost due to poor roads may equate to in excess of $A1 million per annum. The strategies outlined in this paper provide the basis for construction and maintenance of underground mine roads to help achieve desired production targets. (author). 2 tabs., 4 figs., 7 refs.

Seismic risk assessment for road in Indonesia

Science.gov (United States)

Toyfur, Mona Foralisa; Pribadi, Krishna S.

2016-05-01

Road networks in Indonesia consist of 446,000 km of national, provincial and local roads as well as toll highways. Indonesia is one of countries that exposed to various natural hazards, such as earthquakes, floods, landslides, etc. Within the Indonesian archipelago, several global tectonic plates interact, such as the Indo-Australian, Pacific, Eurasian, resulting in a complex geological setting, characterized by the existence of seismically active faults and subduction zones and a chain of more than one hundred active volcanoes. Roads in Indonesia are vital infrastructure needed for people and goods movement, thus supporting community life and economic activities, including promoting regional economic development. Road damages and losses due to earthquakes have not been studied widely, whereas road disruption caused enormous economic damage. The aim of this research is to develop a method to analyse risk caused by seismic hazard to roads. The seismic risk level of road segment is defined using an earthquake risk index, adopting the method of Earthquake Disaster Risk Index model developed by Davidson (1997). Using this method, road segments' risk level can be defined and compared, and road risk map can be developed as a tool for prioritizing risk mitigation programs for road networks in Indonesia.

Vehicle speed control using road bumps

Directory of Open Access Journals (Sweden)

T. A. O. Salau

2004-06-01

Full Text Available Road bumps play a crucial role in enforcing speed limits, thereby preventing overspeeding of vehicles. It significantly contributes to the overall road safety objective through the prevention of accidents that lead to deaths of pedestrians and damage of vehicles. Despite the importance of road bumps, very little research has been done to investigate into their design. While documentation exists on quantitative descriptions of road bumps, they offer little guidance to decision making. This work presents a unique approach to solving road bumps design problems. The results of our study reveal three important road bumps variables that influence the control of vehicle speeds. The key variables are bump height, bump width, and effective distance between two consecutive road bumps. Since vehicle speed control is the ultimate aim of this study the relationship between vehicle speed and other variables earlier mentioned is established. Vehicle speed is defined as the product of frequency at which a vehicle is moving over road bumps and the sum of effective distance between two consecutive road bumps. In the determination of bump height we assume a conical shaped curve for analysis as a matter of research strategy. Based on this, two stages of motion were analysed. The first concerns the motion over the bump itself while the second relates to the motion between two consecutive road bumps. Fourier series was then used to formulate a holistic equation that combines these two stages. We used trigonometric functions to model the behaviour of the first stage while with the second stage giving a functional value of zero since no changes in height are observed. We carried out vibration analysis to determine the effect of road bumps on a vehicular system. Arising from this a model component is referred to as an isolation factor. This offers guidance to the safe frequency at which vehicles could travel over road bumps. The work appears to contribute to knowledge

Recognizablility of rural roads in the Netherlands.

NARCIS (Netherlands)

Aarts, L.T. & Davidse, R.J.

2008-01-01

In the Netherlands, the Sustainable Safety vision is an important guide in improving road safety. It is considered that the road environment shouldconform to the expectations of road users in order to prevent errors thatcould lead to road crashes. These expectations are based on the characteristics

SmartRoads: training Indonesian workers to become road safety ambassadors in industrial and community settings.

Science.gov (United States)

Montero, Kerry; Spencer, Graham; Ariens, Bernadette

2012-06-01

This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.

Marine dredged sediments as new materials resource for road construction.

Science.gov (United States)

Siham, Kamali; Fabrice, Bernard; Edine, Abriak Nor; Patrick, Degrugilliers

2008-01-01

Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).

[Accidents on Iceland's most dangerous roads].

Science.gov (United States)

Bjarnason, Thóroddur; Arnarsson, Sveinn

2012-02-01

The objective of this paper was to identify the most dangerous segments of the Icelandic road system in terms of the number of accidents pr km and the rate of accidents pr million km travelled. First to identify the segments where the number of accidents is highest and where the risk of the individual traveller is the greatest. Second to evaluate if the association between the number and the rate of accidents is positive or negative. Third to identify the road segments that are the most dangerous in the sense of many accidents and great risk to individual travellers. Main roads outside urban centers were divided into 45 segments that were on average 78 km in length. Infrequently travelled roads and roads within urban centers were omitted. Information on the length of roads, traffic density and number of accidents was used to calculate the number of accidents per km and the rate of accidents per million km travelled. The correlation between the number and rate of accidents was calculated and the most dangerous road segments were identified by the average rank order on both dimensions. Most accidents pr km occurred on the main roads to and from the capital region, but also east towards Hvolsvöllur, north towards Akureyri and in the Mideast region of the country. The rate of accidents pr million km travelled was highest in the northeast region, in northern Snæfellsnes and in the Westfjords. The most dangerous roads on both dimensions were in Mideast, northern Westfjords, in the north between Blönduós and Akureyri and in northern Snæfellsnes. Most accidents pr km occurred on roads with a low accident rate pr million km travelled. It is therefore possible to reduce accidents the most by increasing road safety where it is already the greatest but that would however increase inequalities in road safety. Policy development in transportation is therefore in part a question of priorities in healthcare. Individual equality in safety and health are not always fully

Modified use of a dynamic bite opener--treatment and prevention of trismus in a child with head and neck cancer: a case report.

Science.gov (United States)

Dijkstra, P U; Kropmans, T J; Tamminga, R Y

1992-10-01

Trismus may be a complication arising during or after treatment of patients with head and neck cancer. Treatment of trismus is difficult, making prevention very important. To prevent and treat trismus in a patient with a nasopharyngeal tumor, the Contract-Relax-Antagonist-Contract (CRAC) technique was applied, with the aid of a custom-made dynamic bite opener (DBO). The CRAC technique in combination with the DBO, as a therapy/prevention program for trismus, is not referred to in the literature. The combination of CRAC and DBO appeared to be a gentle and effective method well tolerated by the patient.

Gender Stereotypes among Road Users

Directory of Open Access Journals (Sweden)

Kabalevskaya, Alexandra I.

2013-09-01

Full Text Available This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ — at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female driving differ from each other in terms of speed, intensity and roughness; and identified the conditions and mechanisms underlying the actualization of gender stereotypes. Based on video and audio materials, we have found that drivers’ gender-specific behavioural features are perceivable to road users: such features trigger the actualization of gender stereotypes as attributive schemes, which determine the interaction between road users, while also laying the foundation for gender stereotypes.

Road Transport Entrepreneurs and Road Transportation Revolution ...

African Journals Online (AJOL)

Toshiba

upon a massive road-building programme throughout the colony. The rapid expansion ..... transportation problems of his textile customers and palm produce producers and ... unflinching loyalty and solidarity with their illustrious son, General.

PROPOSAL OF VOIVODESHIP ROAD SAFETY IMPROVEMENT PROGRAMME

OpenAIRE

Tomasz SZCZURASZEK; Jan KEMPA

2016-01-01

The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the ...

Safety impacts of rural road construction

Science.gov (United States)

2001-02-01

Crash data in Kentucky show that the fatal crash rate on two-lane rural roads is substantially higher than on any other type of road. Improvements have been proposed at some locations on this type of road which involve either upgrading the existing t...

Psychological aspects of road user behaviour

NARCIS (Netherlands)

Rothengatter, J.A.

The behaviour of road users is an important factor in accident causation. Traffic psychology, defined as ''the study of the behaviour of road users and the psychological processes underlying that behaviour'', attempts to identify the determinants of road user behaviour with the aim of developing

Nonfatal road traffic injuries: can road safety campaigns prevent hazardous behavior? An Italian experience.

Science.gov (United States)

Zampetti, R; Messina, G; Quercioli, C; Vencia, F; Genco, L; Di Bartolomeo, L; Nante, N

2013-01-01

Road traffic injuries are a widespread problem and are very difficult to prevent. The purpose of this study was to verify whether intensive versus basic road safety education programs are associated with different incidence and severity of nonfatal road injuries. The study had an ecological design and involved Local Health Authority One (LHA1) in Salerno, Italy, which includes 20 municipalities. Data on nonfatal road injuries occurring in the periods June to August 2003 and June to August 2008 were obtained from trained operators through the information system of the emergency department. All 20 municipalities received a basic community road safety education program (publicity campaign using bill-posting, brochures, mass media communication with press conferences, articles in local papers, radio and television interviews, and a dedicated LHA1 web site), and 12 municipalities also received an intensive education campaign (in secondary schools, community conferences, and activities organized by police and firefighters). The incidence and severity of nonfatal road traffic injuries were compared between June to August 2003 (before the campaign) and June to August 2008. The total number of injuries in all 20 municipalities in 2003 and 2008 was 907 and 755, respectively. The incidence of injuries decreased in the study period both in the 8 municipalities where only the basic campaign was run (difference in incidence = -0.4; P = .053) and in the 12 municipalities where the intensive campaign was implemented (difference in incidence = -0.5; P road safety education. This does not mean that such campaigns are useless (they are important to raise awareness) but that they should be supplemented with complementary activities in order to be really effective.

Road Lane Detection by Discriminating Dashed and Solid Road Lanes Using a Visible Light Camera Sensor.

Science.gov (United States)

Hoang, Toan Minh; Hong, Hyung Gil; Vokhidov, Husan; Park, Kang Ryoung

2016-08-18

With the increasing need for road lane detection used in lane departure warning systems and autonomous vehicles, many studies have been conducted to turn road lane detection into a virtual assistant to improve driving safety and reduce car accidents. Most of the previous research approaches detect the central line of a road lane and not the accurate left and right boundaries of the lane. In addition, they do not discriminate between dashed and solid lanes when detecting the road lanes. However, this discrimination is necessary for the safety of autonomous vehicles and the safety of vehicles driven by human drivers. To overcome these problems, we propose a method for road lane detection that distinguishes between dashed and solid lanes. Experimental results with the Caltech open database showed that our method outperforms conventional methods.

Global patterns of current and future road infrastructure

Science.gov (United States)

Meijer, Johan R.; Huijbregts, Mark A. J.; Schotten, Kees C. G. J.; Schipper, Aafke M.

2018-06-01

Georeferenced information on road infrastructure is essential for spatial planning, socio-economic assessments and environmental impact analyses. Yet current global road maps are typically outdated or characterized by spatial bias in coverage. In the Global Roads Inventory Project we gathered, harmonized and integrated nearly 60 geospatial datasets on road infrastructure into a global roads dataset. The resulting dataset covers 222 countries and includes over 21 million km of roads, which is two to three times the total length in the currently best available country-based global roads datasets. We then related total road length per country to country area, population density, GDP and OECD membership, resulting in a regression model with adjusted R 2 of 0.90, and found that that the highest road densities are associated with densely populated and wealthier countries. Applying our regression model to future population densities and GDP estimates from the Shared Socioeconomic Pathway (SSP) scenarios, we obtained a tentative estimate of 3.0–4.7 million km additional road length for the year 2050. Large increases in road length were projected for developing nations in some of the world’s last remaining wilderness areas, such as the Amazon, the Congo basin and New Guinea. This highlights the need for accurate spatial road datasets to underpin strategic spatial planning in order to reduce the impacts of roads in remaining pristine ecosystems.

Ultra Low Noise Poroelastic Road Surfaces

Directory of Open Access Journals (Sweden)

Jerzy A. Ejsmont

2016-04-01

Full Text Available Noise is one of the most important environmental problems related to road traffic. During the last decades, the noise emitted by the engines and powertrains of vehicles was greatly reduced and tires became a clearly dominant noise source. The article describes the concept of low noise poroelastic road surfaces that are composed of mineral and rubber aggregate bound by polyurethane resin. Those surfaces have a porous structure and are much more flexible than standard asphalt or cement concrete pavements due to high content of rubber aggregate and elastic binder. Measurements performed in several European countries indicate that such surfaces decrease tire/road noise between 7 dB and 12 dB with respect to reference surfaces such as dense asphalt concrete or stone matrix asphalt. Furthermore, poroelastic road surfaces ascertain the rolling resistance of car tires, which is comparable to classic pavements. One of the unforeseen properties of the poroelastic road surfaces is their ability to decrease the risks related to car fires with fuel spills. The article presents the road and laboratory results of noise, rolling resistance, and fire tests performed on a few types of poroelastic road surfaces.

Using medico-legal data to investigate fatal older road user crash circumstances and risk factors.

Science.gov (United States)

Koppel, Sjaan; Bugeja, Lyndal; Smith, Daisy; Lamb, Ashne; Dwyer, Jeremy; Fitzharris, Michael; Newstead, Stuart; D'Elia, Angelo; Charlton, Judith

2018-02-17

This study used medico-legal data to investigate fatal older road user (ORU, aged 65 years and older) crash circumstances and risk factors relating to 4 key components of the Safe System approach (e.g., roads and roadsides, vehicles, road users, and speeds) to identify areas of priority for targeted prevention activity. The Coroners' Court of Victoria's (CCOV) Surveillance Database was searched to identify and describe the frequency and rate per 100,000 population of fatal ORU crashes in the Australian state of Victoria for 2013-2014. Information relating to the deceased ORU, crash characteristics and circumstances, and risk factors was extracted and analyzed. One hundred and thirty-eight unintentional fatal ORU crashes were identified in the CCOV Surveillance Database. Of these fatal ORU crashes, most involved older drivers (44%), followed by older pedestrians (32%), older passengers (17%), older pedal cyclists (4%), older motorcyclists (1%), and older mobility scooter users (1%). The average annual rate of fatal ORU crashes per 100,000 population was 8.1 (95% confidence interval [CI], 6.0-10.2). In terms of the crash characteristics and circumstances, most fatal ORU crashes involved a counterpart (98%), of which the majority were passenger cars (50%) or fixed/stationary objects (25%), including trees (46%) or embankments (23%). In addition, most fatal ORU crashes occurred close to home (73%), on-road (87%), on roads that were paved (94%), on roads with light traffic volume (37%), and during low-risk conditions: between 12 p.m. and 6 p.m. (44%), on weekdays (80%), during daylight (75%), and under dry/clear conditions (81%). Road user (RU) error was identified by the police and/or the coroner for the majority of fatal crashes (55%), with a significant proportion of deceased ORUs deemed to have failed to yield (54%) or misjudged (41%). RU error was the most significant factor identified in fatal ORU crashes, which suggests that there is a limited capacity of the

23 CFR 660.517 - Maneuver area roads.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Maneuver area roads. 660.517 Section 660.517 Highways... PROGRAMS (DIRECT FEDERAL) Defense Access Roads § 660.517 Maneuver area roads. (a) Claims by a highway agency for costs incurred to restore, to their former condition, roads damaged by maneuvers involving a...

Accelerated pavement testing of low-volume paved roads with geocell reinforcement.

Science.gov (United States)

2015-03-01

The Midwest States Accelerated Pavement Testing Pooled-Fund Program, financed by the highway : departments of Kansas, Iowa, Missouri, and New York, has supported an accelerated pavement testing (APT) project : to study the rehabilitation of low-volum...

Case study: the Argentina Road Safety Project: lessons learned for the decade of action for road safety, 2011-2020.

Science.gov (United States)

Raffo, Veronica; Bliss, Tony; Shotten, Marc; Sleet, David; Blanchard, Claire

2013-12-01

This case study of the Argentina Road Safety Project demonstrates how the application of World Bank road safety project guidelines focused on institution building can accelerate knowledge transfer, scale up investment and improve the focus on results. The case study highlights road safety as a development priority and outlines World Bank initiatives addressing the implementation of the World Report on Road Traffic Injury's recommendations and the subsequent launch of the Decade of Action for Road Safety, from 2011-2020. The case study emphasizes the vital role played by the lead agency in ensuring sustainable road safety improvements and promoting the shift to a 'Safe System' approach, which necessitated the strengthening of all elements of the road safety management system. It summarizes road safety performance and institutional initiatives in Argentina leading up to the preparation and implementation of the project. We describe the project's development objectives, financing arrangements, specific components and investment staging. Finally, we discuss its innovative features and lessons learned, and present a set of supplementary guidelines, both to assist multilateral development banks and their clients with future road safety initiatives, and to encourage better linkages between the health and transportation sectors supporting them.

Dynamics of vehicle-road coupled system

CERN Document Server

Yang, Shaopu; Li, Shaohua

2015-01-01

Vehicle dynamics and road dynamics are usually considered to be two largely independent subjects. In vehicle dynamics, road surface roughness is generally regarded as random excitation of the vehicle, while in road dynamics, the vehicle is generally regarded as a moving load acting on the pavement. This book suggests a new research concept to integrate the vehicle and the road system with the help of a tire model, and establishes a cross-subject research framework dubbed vehicle-pavement coupled system dynamics. In this context, the dynamics of the vehicle, road and the vehicle-road coupled system are investigated by means of theoretical analysis, numerical simulations and field tests. This book will be a valuable resource for university professors, graduate students and engineers majoring in automotive design, mechanical engineering, highway engineering and other related areas. Shaopu Yang is a professor and deputy president of Shijiazhuang Tiedao University, China; Liqun Chen is a professor at Shanghai Univ...

Instrumentation and monitoring of the nextgen road infrastructure: Some results and perspectives from the R5G project

Science.gov (United States)

Hautière, Nicolas; Bourquin, Frédéric

2017-04-01

Through the centuries, the roads - which today constitute in France a huge transport network of 1 millions kilometers length - have always been able to cope with society needs and challenges. As a consequence, the next generation road infrastructure will have to take into account at least three societal transitions: ecological, energetic and digital. The goal of the 5th generation road project (R5G©) [1], led by Ifsttar in France, aligned with the Forever Open program [2], is to design and build demonstrators of such future road infrastructures. The goal of this presentation is to present different results related to the greening of road materials [3], the design of energy-positive roads [4, 5], the test of roads that self-diagnose [6], the design of roads adapted for connected [7], autonomous [8] and electrified vehicles [9], etc. In terms of perspectives, we will demonstrate that the road infrastructures will soon become a complex system: On one side road users will benefit from new services, on the other side such massively connected and instrumented infrastructures will potentially become an opportune sensor for knowledge development in geoscience, such as air quality, visibility and fog monitoring. References: [1] R5G project. r5g.ifsttar.fr [2] Forever Open Road project. www.foreveropenroad.eu [3] Biorepavation project. www.infravation.net/projects/BIOREPAVATION [4] N. Le Touz, J. Dumoulin. Numerical study of the thermal behavior of a new deicing road structure design with energy harvesting capabilities. EGU General Assembly 2015, Apr 2015, Vienne, Austria. [5] S. Asfour, F. Bernardin, E. Toussaint, J.-M. Piau. Hydrothermal modeling of porous pavement for its surface de-freezing. Applied Thermal Engineering. Volume 107, 25 August 2016, Pages 493-500 [6] LGV BPL Instrumentation. http://railenium.eu/wp-content/uploads/2016/08/INSTRUMENTATION-BPL-FR.pdf [7] SCOOP@F project. https

CLEAN-ROADS project: air quality considerations after the application of a novel MDSS on winter road maintenance activities

Science.gov (United States)

Pretto, Ilaria; Malloci, Elisa; Tonidandel, Gabriele; Benedetti, Guido; Di Napoli, Claudia; Piazza, Andrea; Apolloni, Roberto; Cavaliere, Roberto

2016-04-01

With this poster we present the environmental benefit on air quality derived by the application of the CLEAN-ROADS pilot project. The CLEAN-ROADS project addresses the problem of the environmental pollution caused by de-icing salts during winter road maintenance activities in the Province of Trento (Italy). A demonstrative Maintenance Decision Support System (MDSS) has been developed in order to improve the intervention procedures of the road management service. Specifically it aims to optimize the efficiency of how available resources (e.g., salt consumption) are currently used while guaranteeing the current level of road safety. The CLEAN-ROADS project has been tested and validated on a test area located in a valley bottom (Adige Valley), where the highest optimization margins are to be expected. The project supports current road maintenance practices, which has proved to be reliable and accurate, with a new scalable and energy-efficient road monitoring system. This system is based on a network of road weather stations (road weather information system, RWIS) installed on the test route. It is capable to collect real-time data about the road conditions and to perform short-term and now-cast road weather forecasts, which actively integrate weather data and bulletins covering the target area [1]. This poster presents the results obtained from a three-year monitoring activity with the aim to (1) determine the impact of de-icing salts on air quality and (2) quantify the improvements obtained by the application of the CLEAN-ROADS project on air quality. The Ambient Air Quality and Cleaner Air for Europe Directive (2008/50/EC) states that contributions to exceedances of particulate matter PM10 limit values that are attributable to road winter salting may be subtracted when assessing compliance with air quality limit values, once provided that reasonable measures have been taken to lower concentrations [2]. As the de-icing salts used in road maintenance are mainly based

Road Lane Detection by Discriminating Dashed and Solid Road Lanes Using a Visible Light Camera Sensor

Directory of Open Access Journals (Sweden)

Toan Minh Hoang

2016-08-01

Full Text Available With the increasing need for road lane detection used in lane departure warning systems and autonomous vehicles, many studies have been conducted to turn road lane detection into a virtual assistant to improve driving safety and reduce car accidents. Most of the previous research approaches detect the central line of a road lane and not the accurate left and right boundaries of the lane. In addition, they do not discriminate between dashed and solid lanes when detecting the road lanes. However, this discrimination is necessary for the safety of autonomous vehicles and the safety of vehicles driven by human drivers. To overcome these problems, we propose a method for road lane detection that distinguishes between dashed and solid lanes. Experimental results with the Caltech open database showed that our method outperforms conventional methods.

Access road from State Route 240 to the 200 West Area, Hanford Site, Richland, Washington: Environmental assessment

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The US Department of Energy (DOE) proposes to construct an access road on the Hanford Site, from State Route (SR) 240 to Beloit Avenue in the 200 West Area. Traffic volume during shift changes creates an extremely serious congestion and safety problem on Route 4S from the Wye barricade to the 200 Areas. A Risk Evaluation (Trost 1992) indicated that there is a probability of 1.53 fatal accidents on Route 4S within 2 years. To help alleviate this danger, a new 3.5-kilometer (2.2-mile)-long access road would be constructed from Beloit Avenue in the 200 West Area to SR 240. In addition, administrative controls such as redirecting traffic onto alternate routes would be used to further reduce traffic volume. The proposed access road would provide an alternative travel-to-work route for many outer area personnel, particularly those with destinations in the 200 West Area. This proposal is the most reasonable alternative to reduce the problem. While traffic safety would be greatly improved, a small portion of the shrub-steppe habitat would be disturbed. The DOE would offset any habitat damage by re-vegetation or other appropriate habitat enhancement activities elsewhere on the Hanford Site. This Environmental Assessment (EA) provides information about the environmental impacts of the proposed action, so a decision can be made to either prepare an Environmental Impact Statement or issue a Finding of No Significant Impact.

Road Zone Effects in Small-Mammal Communities

Directory of Open Access Journals (Sweden)

John A. Bissonette

2009-06-01

Full Text Available Our study focused on the putative effects of roads on small-mammal communities in a high desert region of southern Utah. Specifically, we tested whether or not roads create adjacent zones characterized by lower small- mammal densities, abundance, and diversity. We sampled abundance of small mammals at increasing distances from Interstate 15 during two summers. We recorded 11 genera and 13 species. We detected no clear abundance, density, or diversity effects relative to distance from the road. Only two of 13 species were never captured near roads. The abundance of the remaining 11 small mammal species was either similar at different distances from the road or higher closer to the road. We conclude that although roads may act as barriers and possible sources of mortality, adjacent zones of vegetation often provide favorable microhabitat in the desert landscape for many small mammals.

Response of moose to a high‐density road network

Science.gov (United States)

Wattles, David W.; Zeller, Katherine A.; DeStefano, Stephen

2018-01-01

Road networks and the disturbance associated with vehicle traffic alter animal behavior, movements, and habitat selection. The response of moose (Alces americanus) to roads has been documented in relatively rural areas, but less is known about moose response to roads in more highly roaded landscapes. We examined road‐crossing frequencies and habitat use of global positioning system (GPS)‐collared moose in Massachusetts, USA, where moose home ranges have road densities approximately twice that of previous studies. We compared seasonal road‐crossing frequencies of moose with a null movement model. We estimated moose travel speeds during road‐crossing events and compared them with speeds during other home range movements. To estimate the extent of the road effect zone and determine how roads influenced moose habitat use, we fit a third‐order resource selection function. With the exception of the lowest use road class (roads less than expected based on the null movement model and frequency decreased with increasing road size and traffic. Moose crossed roads faster than they traveled during other times. This effect increased with increasing road use intensity. Overall, roads were a major factor determining what portions of Massachusetts moose used and how they moved among habitat patches. Our results suggest that moose in Massachusetts can adapt to a high‐density road network, but the road effect is still strongly negative and, in some cases, is more pronounced than in study areas with lower road densities. Future road construction and the expansion of road networks may have a large effect on moose and other wildlife.

Road safety in Poland: magnitude, causes and injuries.

Science.gov (United States)

Goniewicz, Krzysztof; Goniewicz, Mariusz; Pawłowski, Witold; Fiedor, Piotr; Lasota, Dorota

2017-01-01

Road accidents are a serious problem of the modern world. They are one of the main causes of injuries and are the third most frequent cause of death. Every year, about one million people, adults and children, die on the roads and several millions get injured. Mortality rate due to injuries from road accidents amounts to 2.2% of all deaths in the world. The research presents epidemiology of road accidents in the period 2004-2015 with particular emphasis on the key issues of road safety in Poland, related to the dangerous behaviour of road users (disregard toward traffic rules). Between years 2004 and 2015 on Polish roads took place more than 508000 accidents with 53155 fatalities and more then 572000 casualties. Despite the various measures which are taken to improve safety on Polish roads, the number of dead and wounded in the vehicle mishap is still large, and losses borne by society are high. To improve safety on Polish roads, it is necessary to continue multi- action plan to systematically progress in the level of road safety.

ECONOMY OF A NON-WASTE ROAD REPAIRING AND COVERING TECHNOLOGY IN DIFFERENT COUNTRIES

Directory of Open Access Journals (Sweden)

Dilyara Kyazymovna Izmaylova

2017-05-01

Full Text Available The article questions the economic feasibility of the use of a non-waste repairing and restoration technology for the road surfaces. While writing this article there were conducted several analyses, for example: analysis of consumption volumes of mineral components of asphalt mixtures based on the geography of the commodity market, analysis of changes in cost of materials considering transport conditions. Also defined the conditions and preferential types of asphalt concrete processing in different countries.

Information technology road map 2015

International Nuclear Information System (INIS)

2009-09-01

This book introduces information technology road map 2015 with presentation, process, plan and conclusion of it. It also has introduction of IT road map by field : information technology road map 2015 on the next-generation of semiconductor, display, light emitting diode and light industry, home network and home electronic appliances, digital TV and broadcasting, radio technology, satellite communications, mobile communication for the next-generation, BcN field, software, computer for the next-generation and security of knowledge information.

Spatial Analysis Methods of Road Traffic Collisions

DEFF Research Database (Denmark)

Loo, Becky P. Y.; Anderson, Tessa Kate

Spatial Analysis Methods of Road Traffic Collisions centers on the geographical nature of road crashes, and uses spatial methods to provide a greater understanding of the patterns and processes that cause them. Written by internationally known experts in the field of transport geography, the book...... outlines the key issues in identifying hazardous road locations (HRLs), considers current approaches used for reducing and preventing road traffic collisions, and outlines a strategy for improved road safety. The book covers spatial accuracy, validation, and other statistical issues, as well as link...

Investigation of road network features and safety performance.

Science.gov (United States)

Wang, Xuesong; Wu, Xingwei; Abdel-Aty, Mohamed; Tremont, Paul J

2013-07-01

The analysis of road network designs can provide useful information to transportation planners as they seek to improve the safety of road networks. The objectives of this study were to compare and define the effective road network indices and to analyze the relationship between road network structure and traffic safety at the level of the Traffic Analysis Zone (TAZ). One problem in comparing different road networks is establishing criteria that can be used to scale networks in terms of their structures. Based on data from Orange and Hillsborough Counties in Florida, road network structural properties within TAZs were scaled using 3 indices: Closeness Centrality, Betweenness Centrality, and Meshedness Coefficient. The Meshedness Coefficient performed best in capturing the structural features of the road network. Bayesian Conditional Autoregressive (CAR) models were developed to assess the safety of various network configurations as measured by total crashes, crashes on state roads, and crashes on local roads. The models' results showed that crash frequencies on local roads were closely related to factors within the TAZs (e.g., zonal network structure, TAZ population), while crash frequencies on state roads were closely related to the road and traffic features of state roads. For the safety effects of different networks, the Grid type was associated with the highest frequency of crashes, followed by the Mixed type, the Loops & Lollipops type, and the Sparse type. This study shows that it is possible to develop a quantitative scale for structural properties of a road network, and to use that scale to calculate the relationships between network structural properties and safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles

Science.gov (United States)

Abu-Allaban, Mahmoud; Gillies, John A.; Gertler, Alan W.; Clayton, Russ; Proffitt, David

Intensive mass and chemical measurements were performed at roadside locations in Reno, Nevada, and Durham/Research Triangle Park), North Carolina to derive tailpipe, resuspended road dust, and brake-wear emission factors from in-use vehicles. Continuous particulate matter (PM) data were utilized to derive total emission factors while integrated PM data were used to attribute the calculated emission factors to different mechanisms using chemical mass balance receptor modeling and scanning electron microscopy techniques. Resuspended road dust and tailpipe emissions were found to be the dominant mechanisms that contribute significantly to the total PM 10 and PM 2.5 emission factors, respectively. Small contributions from brake-wear were observed at locations where strong braking occurs, but no tire-wear was seen at any sampling location. PM 10 emission rates from light-duty spark ignition (LDSI) vehicles ranged from 40 to 780 mg/km, 10 to 70 mg/km, and 0 to 80 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 10 emission rates from heavy-duty vehicles ranged from 230 to 7800 mg/km, 60 to 570 mg/km, and 0 to 610 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from LDSI vehicles ranged from 2 to 25 mg/km, 10 to 50 mg/km, and 0 to 5 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from heavy-duty vehicles ranged from 15 to 300 mg/km, 60 to 480 mg/km, and 0 to 15 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively.

Sensitivity Analysis Based SVM Application on Automatic Incident Detection of Rural Road in China

Directory of Open Access Journals (Sweden)

Xingliang Liu

2018-01-01

Full Text Available Traditional automatic incident detection methods such as artificial neural networks, backpropagation neural network, and Markov chains are not suitable for addressing the incident detection problem of rural roads in China which have a relatively high accident rate and a low reaction speed caused by the character of small traffic volume. This study applies the support vector machine (SVM and parameter sensitivity analysis methods to build an accident detection algorithm in a rural road condition, based on real-time data collected in a field experiment. The sensitivity of four parameters (speed, front distance, vehicle group time interval, and free driving ratio is analyzed, and the data sets of two parameters with a significant sensitivity are chosen to form the traffic state feature vector. The SVM and k-fold cross validation (K-CV methods are used to build the accident detection algorithm, which shows an excellent performance in detection accuracy (98.15% of the training data set and 87.5% of the testing data set. Therefore, the problem of low incident reaction speed of rural roads in China could be solved to some extent.

Distraction-related road traffic collisions

African Journals Online (AJOL)

drivers involved in road traffic collisions (RTC) were using mobile phones. Our study supports ... while driving. Keywords: Distraction, prevention, road traffic collision, mobile phone. ..... keeps us connected with others with great advantages.

Road icing forecasting and detecting system

Science.gov (United States)

Xu, Hongke; Zheng, Jinnan; Li, Peiqi; Wang, Qiucai

2017-05-01

Regard for the facts that the low accuracy and low real-time of the artificial observation to determine the road icing condition, and it is difficult to forecast icing situation, according to the main factors influencing the road-icing, and the electrical characteristics reflected by the pavement ice layer, this paper presents an innovative system, that is, ice-forecasting of the highway's dangerous section. The system bases on road surface water salinity measurements and pavement temperature measurement to calculate the freezing point of water and temperature change trend, and then predicts the occurrence time of road icing; using capacitance measurements to verdict the road surface is frozen or not; This paper expounds the method of using single chip microcomputer as the core of the control system and described the business process of the system.

Road Safety Education in a Science Course: Evaluation of "Science and the Road."

Science.gov (United States)

Gardner, Paul L.

1989-01-01

A traffic safety instructional package--"Science and the Road"--was assessed. It was designed by the Road Traffic Authority of Victoria (Australia) for use in tenth-grade science courses. Evaluation findings resulted in revision of the unit and implementation of more inservice courses for teachers lacking relevant biology and physics…

Kansas Road Centerline Fle (KRCF)

Data.gov (United States)

Kansas Data Access and Support Center — This version of the Kansas Road Centerline File (0801) represents the first effort to create a statewide roads layer from best available data sources. KGS integrated...

49 CFR 391.31 - Road test.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Road test. 391.31 Section 391.31 Transportation... COMBINATION VEHICLE (LCV) DRIVER INSTRUCTORS Tests § 391.31 Road test. (a) Except as provided in subpart G, a person shall not drive a commercial motor vehicle unless he/she has first successfully completed a road...

Use of wood ash for road stabilisation

International Nuclear Information System (INIS)

Lagerkvist, A.; Lind, B.

2009-01-01

Due to warmer winters in Sweden, the bearing capacity of forestry roads has become increasingly problematic in recent years. Road stabilization is needed in order to get timber out from the forests. This usually involves the addition of cement to the road body. However, wood ash is a possible substitute for cement because it has similar properties. Using wood ash has the added advantage of saving landfill space. This paper presented an ongoing laboratory study on leaching and mechanical stability, as well as frost-sensitivity using a 30 per cent ash addition to natural soils for reinforcing a forestry road near Timra in central Sweden. The road was being monitored with regard to environmental impact and mechanical properties. The paper discussed the potential of biofuel ashes and the increasing need to reinforce infrastructure due to climate change. The environmental impact from ash use in road constructions was then addressed. It was concluded that the application of ash in road construction would help to strengthen forest roads, make them more resistant to climatic change and render them accessible year-round. 32 refs., 3 tabs., 2 figs.

Gender Stereotypes among Road Users

OpenAIRE

Kabalevskaya, Alexandra I.

2013-01-01

This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ — at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female dr...

Gender stereotypes among road users

OpenAIRE

Dontsov, Alexander; Kabalevskaya, Alexandra

2013-01-01

This article analyzes the mechanism of stereotyping as exemplified by gender stereotypes of road users. Gender stereotypes are not only viewed as an a priori image of a percept, but also examined ‘in action’ at the very moment of their actualization with road users. In the paper we have identified the content of road users’ gender stereotypes; analyzed the behaviour of male and female drivers, pinpointing a number of gender-specific behavioural features; demonstrated that male and female driv...

Scaling roads and wildlife: The Cinderella principle

Science.gov (United States)

Bissonette, J.A.

2002-01-01

It is clear that a reduction in both direct and indirect effects of roads and road networks must be the goal of management agencies. However, increased permeability of roaded landscapes can only be achieved by up-front planning and subsequent mitigative actions. The key is to understand that roads must be made permeable to the movement of animals. More profoundly, ecosystem services, i.e., clean water, clean air, uncontaminated soil, natural landscapes, recreation opportunities, abundant wildlife, and life sustaining ecological processes must not be seriously impacted. In other words, quality of life as measured by ecosystem services should be a major component of the planning process when roads are constructed or improved. Mitigative structures exist to increase permeability of roads. Wildlife overpasses and underpasses, often referred to as ecoducts or green bridges, with associated structures to enable larger animals to exit the road right of way, e.g., earthen escape ramps (BISSONETTE and HAMMER, 2001), various culvert designs for smaller animals including badger pipes and amphibian and reptile tunnels, and fish ladders are but a small sampling of the structures already in place around the world. What is needed is attention to the big picture. Landscapes need to be reconnected and made more permeable. Responsible agencies and organizations need to be aggressive about promoting mitigations and a conservation ethic into road planning. Only with a broad based effort between a concerned public, a database to work from, and a willingness of responsible agencies, will the now very large virtual footprint of roads and road networks be reduced to more closely approximate the physical footprint. By embracing the Cinderella Principle of making the virtual shoe fit more closely the actual physical footprint of roads, we will be able to achieve a closer connection with ecological harmony with its resultant effect of abundant wildlife.

Global collaboration on road traffic injury prevention.

Science.gov (United States)

Peden, Margie

2005-06-01

Worldwide, nearly 1.2 million people are killed in road traffic crashes every year and 20 million to 50 million more are injured or disabled. These injuries account for 2.1% of global mortality and 2.6% of all disability-adjusted life years (DALYs) lost. Low- and middle-income countries account for about 85% of the deaths and 90% of the DALYs lost annually. Without appropriate action, by 2020, road traffic injuries are predicted to be the third leading contributor to the global burden of disease. The economic cost of road traffic crashes is enormous. Globally it is estimated that US$518 billion is spent on road traffic crashes with low- and middle-income countries accounting for US$65 billion--more than these countries receive in development assistance. But these costs are just the tip of the iceberg. For everyone killed, injured or disabled by a road traffic crash there are countless others deeply affected. Many families are driven into poverty by the expenses of prolonged medical care, loss of a family breadwinner or the added burden of caring for the disabled. There is an urgent need for global collaboration on road traffic injury prevention. Since 2000, WHO has stepped up its response to the road safety crisis by firstly developing a 5-year strategy for road traffic injury prevention and following this by dedicating World Health Day 2004 to road safety and launching the WHO/World Bank World Report on Road Traffic Injury Prevention at the global World Health Day event in Paris, France. This short article highlights the main messages from the World Report and the six recommendations for action on road safety at a national and international level. It goes on to briefly discuss other international achievements since World Health Day and calls for countries to take up the challenge of implementing the recommendations of the World Report.

The Relationship between Road Design and Driving Behavior

DEFF Research Database (Denmark)

Abele, Liva; Møller, Mette

2011-01-01

Speed is a substantial factor contributing to road safety. Currently, speed reduction is mainly achieved through law enforcement and the implementation of traffic calming measures. An alternative speed reducing approach is to encourage drivers to voluntarily choose an appropriate driving speed....... Improving road infrastructure safety can be achieved by making roads forgiving and self-explaining. This could be done by clarifying the road design characteristics for each road category. The effect on driver behavior by varying road-shoulders and presence of roadside trees was tested by means of a fixed-driving...... simulator experiment. Speed and lateral position were used as performance indicators. The results indicated that shoulders might not be applied to decrease the speed on the experimental road stretch, but their presence cause drivers to drive closer to the road edge, hence eliminating the probability of head...

Combined Prediction Model of Death Toll for Road Traffic Accidents Based on Independent and Dependent Variables

Directory of Open Access Journals (Sweden)

Feng Zhong-xiang

2014-01-01

Full Text Available In order to build a combined model which can meet the variation rule of death toll data for road traffic accidents and can reflect the influence of multiple factors on traffic accidents and improve prediction accuracy for accidents, the Verhulst model was built based on the number of death tolls for road traffic accidents in China from 2002 to 2011; and car ownership, population, GDP, highway freight volume, highway passenger transportation volume, and highway mileage were chosen as the factors to build the death toll multivariate linear regression model. Then the two models were combined to be a combined prediction model which has weight coefficient. Shapley value method was applied to calculate the weight coefficient by assessing contributions. Finally, the combined model was used to recalculate the number of death tolls from 2002 to 2011, and the combined model was compared with the Verhulst and multivariate linear regression models. The results showed that the new model could not only characterize the death toll data characteristics but also quantify the degree of influence to the death toll by each influencing factor and had high accuracy as well as strong practicability.

Combined prediction model of death toll for road traffic accidents based on independent and dependent variables.

Science.gov (United States)

Feng, Zhong-xiang; Lu, Shi-sheng; Zhang, Wei-hua; Zhang, Nan-nan

2014-01-01

In order to build a combined model which can meet the variation rule of death toll data for road traffic accidents and can reflect the influence of multiple factors on traffic accidents and improve prediction accuracy for accidents, the Verhulst model was built based on the number of death tolls for road traffic accidents in China from 2002 to 2011; and car ownership, population, GDP, highway freight volume, highway passenger transportation volume, and highway mileage were chosen as the factors to build the death toll multivariate linear regression model. Then the two models were combined to be a combined prediction model which has weight coefficient. Shapley value method was applied to calculate the weight coefficient by assessing contributions. Finally, the combined model was used to recalculate the number of death tolls from 2002 to 2011, and the combined model was compared with the Verhulst and multivariate linear regression models. The results showed that the new model could not only characterize the death toll data characteristics but also quantify the degree of influence to the death toll by each influencing factor and had high accuracy as well as strong practicability.

Multispectral Image Road Extraction Based Upon Automated Map Conflation

Science.gov (United States)

Chen, Bin

Road network extraction from remotely sensed imagery enables many important and diverse applications such as vehicle tracking, drone navigation, and intelligent transportation studies. There are, however, a number of challenges to road detection from an image. Road pavement material, width, direction, and topology vary across a scene. Complete or partial occlusions caused by nearby buildings, trees, and the shadows cast by them, make maintaining road connectivity difficult. The problems posed by occlusions are exacerbated with the increasing use of oblique imagery from aerial and satellite platforms. Further, common objects such as rooftops and parking lots are made of materials similar or identical to road pavements. This problem of common materials is a classic case of a single land cover material existing for different land use scenarios. This work addresses these problems in road extraction from geo-referenced imagery by leveraging the OpenStreetMap digital road map to guide image-based road extraction. The crowd-sourced cartography has the advantages of worldwide coverage that is constantly updated. The derived road vectors follow only roads and so can serve to guide image-based road extraction with minimal confusion from occlusions and changes in road material. On the other hand, the vector road map has no information on road widths and misalignments between the vector map and the geo-referenced image are small but nonsystematic. Properly correcting misalignment between two geospatial datasets, also known as map conflation, is an essential step. A generic framework requiring minimal human intervention is described for multispectral image road extraction and automatic road map conflation. The approach relies on the road feature generation of a binary mask and a corresponding curvilinear image. A method for generating the binary road mask from the image by applying a spectral measure is presented. The spectral measure, called anisotropy-tunable distance (ATD

Sediment deposition from forest roads at stream crossings as influenced by road characteristics

Science.gov (United States)

A.J. Lang; W.M. Aust; M.C. Bolding; K.J. McGuire

2015-01-01

Recent controversies associated with ditched forest roads and stream crossings in the Pacific Northwest have focused national attention on sediment production and best management practices (BMPs) at stream crossings. Few studies have quantified soil erosion rates at stream crossings as influenced by road characteristics and compared them to modeled rates. Soil erosion...

Automated patch-clamp technique: increased throughput in functional characterization and in pharmacological screening of small-conductance Ca2+ release-activated Ca2+ channels

DEFF Research Database (Denmark)

Schrøder, Rikke L; Friis, Søren; Sunesen, Morten

2008-01-01

require high signal-to-noise ratios obtained by high seal resistances. Automated whole-cell establishment resulted in membrane resistances of 1728 +/- 226 MOmega (n = 44). CRAC channels were activated by a number of methods that raise intracellular calcium concentration, including EGTA, ionomycin, Ins(1......, and the current could be reactivated by subsequent addition of thapsigargin. I(CRAC) was blocked by SKF-96365 and 2-APB with IC50 values of 4.7 +/- 1.1 microM (n = 9) and 7.5 +/- 0.7 (n = 9) microM, respectively. The potencies of these blockers were similar to values reported for I(CRAC) in similar conventional...

Mayan Forest Road Projects

DEFF Research Database (Denmark)

Conde, Dalia Amor

2008-01-01

Road-building projects in the Mayan Biosphere Reserve to connect Mexico and Guatemala were subjected to a cost-benefit evaluation. Up to an estimated 311,000 hectares of jaguar habitat were found to be at risk of deforestation due to these projects. Some of the projects were shown to have negativ...... of continued conservation rather than road development....

BRICS: opportunities to improve road safety.

Science.gov (United States)

Hyder, Adnan A; Vecino-Ortiz, Andres I

2014-06-01

Brazil, the Russian Federation, India, China and South Africa--the countries known as BRICS--are currently undergoing a deep epidemiological transition that is mainly driven by rapid economic growth and technological change. The changes being observed in the distribution of the burden of diseases and injuries--such as recent increases in the incidence of road traffic injuries--are matters of concern. BRICS may need stronger institutional capacity to address such changes in a timely way. In this paper, we present data on road traffic injuries in BRICS and illustrate the enormous challenge that these countries currently face in reducing the incidence of such injuries. There is an urgent need to improve road safety indicators in every country constituting BRICS. It is imperative for BRICS to invest in system-wide road safety interventions and reduce the mortality and morbidity from road traffic injuries.

Roads Belong In the Urban Landscape

DEFF Research Database (Denmark)

Clemmensen, Thomas Juel

2012-01-01

In spite of being an essential part of the system of automobility and as such playing an important role in the development of urban landscapes, road networks seldom attracts much attention among architects involved in the planning and design of urban landscapes. One reason is probably found...... in the dominance of the zoning approach to planning, where road planning easily becomes isolated and reduced to a matter of traffic regulation and transport economy. Another possible reason could be, as suggested by the Australian landscape architect Christopher Sawyer, that road networks like other...... as landscape architects engage with road networks in profound ways, which moves beyond the purely visual and pictorial? Is it possible to conceptually (re)locate road networks in the landscape? The paper will address these questions by discussing different understandings of landscape and its relation...

A Fuel-Based Assessment of On-Road and Off-Road Mobile Source Emission Trends

Science.gov (United States)

Dallmann, T. R.; Harley, R. A.

2009-12-01

Mobile sources contribute significantly to emissions of nitrogen oxides (NOx) and fine particulate matter (PM2.5) in the United States. These emissions lead to a variety of environmental concerns including adverse human health effects and climate change. In the electric power sector, sulfur dioxide (SO2) and NOx emissions from power plants are measured directly using continuous emission monitoring systems. In contrast for mobile sources, statistical models are used to estimate average emissions from a very large and diverse population of engines. Despite much effort aimed at improving them, mobile source emission inventories continue to have large associated uncertainties. Alternate methods are needed to help evaluate estimates of mobile source emissions and quantify and reduce the associated uncertainties. In this study, a fuel-based approach is used to estimate emissions from mobile sources, including on-road and off-road gasoline and diesel engines. In this approach, engine activity is measured by fuel consumed (in contrast EPA mobile source emission models are based on vehicle km of travel and total amount of engine work output for on-road and off-road engines, respectively). Fuel consumption is defined in this study based on highway fuel tax reports for on-road engines, and from surveys of fuel wholesalers who sell tax-exempt diesel fuel for use in various off-road sectors such as agriculture, construction, and mining. Over the decade-long time period (1996-2006) that is the focus of the present study, national sales of taxable gasoline and diesel fuel intended for on-road use increased by 15 and 43%, respectively. Diesel fuel use by off-road equipment increased by about 20% over the same time period. Growth in fuel consumption offset some of the reductions in pollutant emission factors that occurred during this period. This study relies on in-use measurements of mobile source emission factors, for example from roadside and tunnel studies, remote sensing, and

Road geometry as a factor for musculoskeletal injuries due to road traffic accidents in Sub-Himalayan State of Himachal Pradesh

Directory of Open Access Journals (Sweden)

Sunil Kumar Raina

2017-01-01

Full Text Available Background: Road traffic accidents (RTAs kill 1.25 million people each year and injure between 20 and 50 million more people with many incurring a disability as a result of their injury. The road environment (design and geometry can affect driver speed choice, thereby increasing chances of accidents.Materials and Methods: Patients attending tertiary care center for musculoskeletal injuries after an RTA were enrolled in the study. The data were collected using a standard questionnaire. The details on the geometry of the road (type of road; highway or other, metaled or nonmetaled, straight, and curved were obtaine through inspection wherever possible. Results: Majority of the RTAs occurred on state highways (n = 154/313, 49.7% followed by national highways (NH (n = 94/313, 30%. Link roads account for comparatively less number (n = 65/313, 20.7% of cases. Majority of the accidents occurred on metaled road (n = 268, 85.6%; however, the association of different vehicles involved in RTA with the condition of road was not found to be significant statistically (P > 0.5. Further, the majority of the RTA occurred on straight roads (n = 204, 65.1%. Conclusion: Road geometry is an important factor in RTAs as drivers generally tend to choose their speed based on their perception of the appropriate speed for the road geometry.

Who is in control of road safety? A STAMP control structure analysis of the road transport system in Queensland, Australia.

Science.gov (United States)

Salmon, Paul M; Read, Gemma J M; Stevens, Nicholas J

2016-11-01

Despite significant progress, road trauma continues to represent a global safety issue. In Queensland (Qld), Australia, there is currently a focus on preventing the 'fatal five' behaviours underpinning road trauma (drug and drink driving, distraction, seat belt wearing, speeding, and fatigue), along with an emphasis on a shared responsibility for road safety that spans road users, vehicle manufacturers, designers, policy makers etc. The aim of this article is to clarify who shares the responsibility for road safety in Qld and to determine what control measures are enacted to prevent the fatal five behaviours. This is achieved through the presentation of a control structure model that depicts the actors and organisations within the Qld road transport system along with the control and feedback relationships that exist between them. Validated through a Delphi study, the model shows a diverse set of actors and organisations who share the responsibility for road safety that goes beyond those discussed in road safety policies and strategies. The analysis also shows that, compared to other safety critical domains, there are less formal control structures in road transport and that opportunities exist to add new controls and strengthen existing ones. Relationships that influence rather than control are also prominent. Finally, when compared to other safety critical domains, the strength of road safety controls is brought into question. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Congestion Control System Based on VANET for Small Length Roads

Directory of Open Access Journals (Sweden)

Ruchin Jain

2018-01-01

Full Text Available As vehicle population has been increasing on a daily basis, this leads towards increased number of accidents. To overcome this issue, Vehicular Ad Hoc Network (VANET has come up with lot of novel ideas such as vehicular communication, navigation and traffic controlling. In this study, the main focus is on congestion control at the intersections which result from unclear ahead. For this purpose, a city lane and intersection model has been proposed to manage vehicle mobility. It shows the actual vehicle to vehicle and vehicle to traffic infrastructure communication. The experiment was conducted using Network Simulator 2 (NS 2. The implementation required modelling the road side unit, traffic control unit, and on-board unit along the roadside. In the simulation, including traffic volume, the distance between two signals, end-to-end delay, packet delivery ratio, throughput and packet lost were taken into consideration. These parameters ensure efficient communication between the traffic signals. This results in improved congestion control and road safety, since the vehicles will be signalled not to enter the junction box and information about other vehicles.

Trismus: An unusual presentation following road accident

Directory of Open Access Journals (Sweden)

Thakur Jagdeep

2007-01-01

Full Text Available Trismus due to trauma usually follows road accidents leading to massive faciomaxillary injury. In the literature there is no report of a foreign body causing trismus following a road accident, this rare case is an exception. We present a case of isolated presentation of trismus following a road accident. This case report stresses on the thorough evaluation of patients presenting with trismus following a road accident.

Innovation as Road Safety Felicitator

Science.gov (United States)

Sahoo, S.; Mitra, A.; Kumar, J.; Sahoo, B.

2018-03-01

Transportation via Roads should only be used for safely commuting from one place to another. In 2015, when 1.5 Million people, across the Globe started out on a journey, it was meant to be their last. The Global Status Report on Road Safety, 2015, reflected this data from 180 countries as road traffic deaths, worldwide. In India, more than 1.37 Lakh[4] people were victims of road accidents in 2013 alone. That number is more than the number of Indians killed in all the wars put together. With these disturbing facts in mind, we found out some key ambiguities in the Indian Road Traffic Management systems like the non-adaptive nature to fluctuating traffic, pedestrians and motor vehicles not adhering to the traffic norms strictly, to name a few. Introduction of simple systems would greatly erase the effects of this silent epidemic and our Project aims to achieve the same. It would introduce a pair of Barricade systems to cautiously separate the pedestrians and motor vehicles to minimise road mishaps to the extent possible. Exceptional situations like that of an Ambulance or any emergency vehicles will be taken care off by the use of RFID tags to monitor the movement of the Barricades. The varied traffic scenario can be guided properly by using the ADS-B (Automatic Detection System-Broadcast) for monitoring traffic density according to the time and place.

Improving road safety: Experiences from the Netherlands

OpenAIRE

Hagenzieker, M.P.

2012-01-01

Dr. Hagenzieker's research and education activities focus on the road safety effects of the transport system, with particular interest in road user behaviour aspects. Her PhD-research was on the effects of rewards on road user behaviour.

Heavy vehicle simulator and laboratory testing of a light pavement structure for low-volume roads

CSIR Research Space (South Africa)

Theyse, HL

2006-06-01

Full Text Available Group sandstones in the area. The engineering properties of the pavement materials are summarised in Table 1. The base layer material did not satisfy the grading and CBR requirements (CSRA, 1984) to be classified as a G4 material and the material... upgrading. Table 1. Engineering properties of the material from the main pavement layers on Road 538 Pavement layerEngineering properties Base Subbase Imported Sand In situ sand Grading Modulus (GM) 2.101 1.422 1.179 1.030 Liquid Limit (LL) 17 SP NP...

[Effects of road construction on regional vegetation types].

Science.gov (United States)

Liu, Shi-Liang; Liu, Qi; Wang, Cong; Yang, Jue-Jie; Deng, Li

2013-05-01

As a regional artificial disturbance component, road exerts great effects on vegetation types, and plays a substantial role in defining vegetation distribution to a certain extent. Aiming at the tropical rainforest degradation and artificial forest expansion in Yunnan Province of Southwest China, this paper analyzed the effects of road network extension on regional vegetation types. In the Province, different classes of roads had different effects on the vegetation types, but no obvious regularity was observed in the effects on the patch areas of different vegetation types due to the great variations of road length and affected distance. However, the vegetation patch number was more affected by lower class roads because of their wide distribution. As for different vegetation types, the vegetations on cultivated land were most affected by roads, followed by Castanopsis hystrix and Schima wallichii forests. Road network formation contributed most to the vegetation fragmentation, and there existed significant correlations between the human disturbance factors including village- and road distributions.

Value of monitoring in road network management

NARCIS (Netherlands)

Zouch, M.; Courage, W.; Napoles-Morales, O.

2014-01-01

We present a framework for road network management to assist road authorities in maintenance budget estimations and long-term maintenance strategies definition. Information about road conditions is obtained from monitoring. Available data are used to estimate and update prediction of degradation

road sector development and economic growth in ethiopia1

African Journals Online (AJOL)

Eyerusalem

Regarding community roads, both the management and accountancy .... previous years and its impact on overall and sectoral economic growth. Descriptive analysis is deployed to capture the link between the road transport sector and performance indicators, like rural accessibility, road density, road network, road financing ...

Birds and Roads: Reduced Transit for Smaller Species over Roads within an Urban Environment

Directory of Open Access Journals (Sweden)

Christopher D. Johnson

2017-05-01

Full Text Available Roads provide humans with a means of mobility between destinations, be it for transportation of goods and services or as a means of connecting with others. However, roads are also known to contribute toward a number of deleterious landscape processes, such as habitat destruction and fragmentation, pollution (e.g., chemical, noise and light and animal mortality. Few studies however have investigated their effects on avifauna. We investigated the influence of road width on movements of nearby bird assemblages in Australia by comparing crossing counts of four species guilds and sizes over roads of varying widths in Southern Brisbane. In addition, we also sought to determine the association of seasonality with species crossing richness and abundance. Species guild affiliations were based on definitions from previous literature: small forest dependent, large forest dependent, honeyeater, and urban tolerant; whereas body size classifications were arbitrarily defined: small (< 20 cm, medium (20–29 cm, and large (>30 cm. Road sites were selected based on their vegetation likeness, both within and between sites, and this was assessed using the Specht classification system. We detected strong, negative correlations between road width and forest species richness, crossing species richness and species crossing abundance. In particular, analysis of species guild classifications revealed species richness and crossing likelihoods of the small forest dependent guild to be consistently lower than those of large forest dependent, honeyeater and urban tolerant guilds. Analysis of species by body size classification yielded similar outcomes: small birds were consistently less likely to be present nearby and cross over roads of all widths compared to medium and large birds. We believe gap permeability, particularly changes in vegetation structure and complexity that may restrict a species ability to access to the gap, as well as competition and predation, play an

Distributed Road Grade Estimation for Heavy Duty Vehicles

Energy Technology Data Exchange (ETDEWEB)

Sahlholm, Per

2011-07-01

An increasing need for goods and passenger transportation drives continued worldwide growth in traffic. As traffic increases environmental concerns, traffic safety, and cost efficiency become ever more important. Advancements in microelectronics open the possibility to address these issues through new advanced driver assistance systems. Applications such as predictive cruise control, automated gearbox control, predictive front lighting control, and hybrid vehicle state-of-charge control decrease the energy consumption of vehicles and increase the safety. These control systems can benefit significantly from preview road grade information. This information is currently obtained using specialized survey vehicles, and is not widely available. This thesis proposes new methods to obtain road grade information using on-board sensors. The task of creating road grade maps is addressed by the proposal of a framework where vehicles using a road network collect the necessary data for estimating the road grade. The estimation can then be carried out locally in the vehicle, or in the presence of a communication link to the infrastructure, centrally. In either case the accuracy of the map increases over time, and costly road surveys can be avoided. This thesis presents a new distributed method for creating accurate road grade maps for vehicle control applications. Standard heavy duty vehicles in normal operation are used to collect measurements. Estimates from multiple passes along a road segment are merged to form a road grade map, which improves each time a vehicle retraces a route. The design and implementation of the road grade estimator are described, and the performance is experimentally evaluated using real vehicles. Three different grade estimation methods, based on different assumption on the road grade signal, are proposed and compared. They all use data from sensors that are standard equipment in heavy duty vehicles. Measurements of the vehicle speed and the engine

Climate Projection Data base for Roads - CliPDaR: Design a guideline for a transnational database of downscaled climate projection data for road impact models - within the Conference's of European Directors of Roads (CEDR) TRANSNATIONAL ROAD RESEARCH PROG

Science.gov (United States)

Matulla, Christoph; Namyslo, Joachim; Fuchs, Tobias; Türk, Konrad

2013-04-01

The European road sector is vulnerable to extreme weather phenomena, which can cause large socio-economic losses. Almost every year there occur several weather triggered events (like heavy precipitation, floods, landslides, high winds, snow and ice, heat or cold waves, etc.), that disrupt transportation, knock out power lines, cut off populated regions from the outside and so on. So, in order to avoid imbalances in the supply of vital goods to people as well as to prevent negative impacts on health and life of people travelling by car it is essential to know present and future threats to roads. Climate change might increase future threats to roads. CliPDaR focuses on parts of the European road network and contributes, based on the current body of knowledge, to the establishment of guidelines helping to decide which methods and scenarios to apply for the estimation of future climate change based challenges in the field of road maintenance. Based on regional scale climate change projections specific road-impact models are applied in order to support protection measures. In recent years, it has been recognised that it is essential to assess the uncertainty and reliability of given climate projections by using ensemble approaches and downscaling methods. A huge amount of scientific work has been done to evaluate these approaches with regard to reliability and usefulness for investigations on possible impacts of climate changes. CliPDaR is going to collect the existing approaches and methodologies in European countries, discuss their differences and - in close cooperation with the road owners - develops a common line on future applications of climate projection data to road impact models. As such, the project will focus on reviewing and assessing existing regional climate change projections regarding transnational highway transport needs. The final project report will include recommendations how the findings of CliPDaR may support the decision processes of European

Geotechnical Monitoring of the Automobile Road

Science.gov (United States)

Matsiy, Vladimir

2017-12-01

In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

Roads Belong in the Urban Landscape

DEFF Research Database (Denmark)

Clemmensen, Thomas Juel

2013-01-01

Roads are often associated with a fragmentation or splintering of landscapes and their natural connectivity; particularly in relation to ‘green infrastructure’ they are often considered problematic elements that rupture and barricade. Conversely, as part of larger networks, roads can be considered...... important elements in the creation of new, ‘green infrastructures’ that can qualify urban landscapes in terms of improving their overall porosity and connectivity. This argument will be unfolded and substantiated in this article through theoretical reflections which conceptually re-locate road networks...... in the urban landscape, supported by relevant reference projects that illustrate the potential of road networks as a platform for ‘green infrastructure’....

Predicting risk of trace element pollution from municipal roads using site-specific soil samples and remotely sensed data.

Science.gov (United States)

Reeves, Mari Kathryn; Perdue, Margaret; Munk, Lee Ann; Hagedorn, Birgit

2018-07-15

Studies of environmental processes exhibit spatial variation within data sets. The ability to derive predictions of risk from field data is a critical path forward in understanding the data and applying the information to land and resource management. Thanks to recent advances in predictive modeling, open source software, and computing, the power to do this is within grasp. This article provides an example of how we predicted relative trace element pollution risk from roads across a region by combining site specific trace element data in soils with regional land cover and planning information in a predictive model framework. In the Kenai Peninsula of Alaska, we sampled 36 sites (191 soil samples) adjacent to roads for trace elements. We then combined this site specific data with freely-available land cover and urban planning data to derive a predictive model of landscape scale environmental risk. We used six different model algorithms to analyze the dataset, comparing these in terms of their predictive abilities and the variables identified as important. Based on comparable predictive abilities (mean R 2 from 30 to 35% and mean root mean square error from 65 to 68%), we averaged all six model outputs to predict relative levels of trace element deposition in soils-given the road surface, traffic volume, sample distance from the road, land cover category, and impervious surface percentage. Mapped predictions of environmental risk from toxic trace element pollution can show land managers and transportation planners where to prioritize road renewal or maintenance by each road segment's relative environmental and human health risk. Published by Elsevier B.V.

Why Did the Snake Cross the Road? Effects of Roads on Movement and Location of Mates by Garter Snakes (Thamnophis sirtalis parietalis

Directory of Open Access Journals (Sweden)

Richard Shine

2004-06-01

Full Text Available If animals avoid road surfaces or are unable to follow conspecific trails across such surfaces, previously continuous populations may be fragmented. We gathered data on the effects of a small (4-m wide gravel road on the behavior and trail-following abilities of garter snakes (Thamnophis sirtalis parietalis in Manitoba, central Canada. As expected, the road surface had less vegetation cover, a more open canopy and, thus, higher incident radiation than did the surrounding grassland. Contrary to expectations, however, substrate temperatures were lower on the road than in its surrounds, because of the higher reflectivity of the road's surface. On a nearby asphalt road, substrate temperatures were relatively high on the road surface only in the evening, as surrounding areas cooled. Focal sampling showed that snakes avoided the gravel road, typically changing direction when they encountered it. If they crossed the road, they did so by the shortest possible route (straight across. Mate-searching male snakes were less able to follow substrate-deposited pheromonal trails left by females if those trails crossed a road than if the trails were entirely within the surrounding grassland. Thus, roads may significantly modify snake movement patterns, as well as the ability of males to locate reproductive females. Our study provides the first detailed information on the effects of roads on snake behavior.

Functional classification of the Gauteng provincial road network ...

African Journals Online (AJOL)

The built environment consists of various land uses and activities connected by a road network. The efficiency and effectiveness of the road network directly impacts economic growth and societal movement. This study involved the functional classification of the Gauteng provincial road network using the South African Road ...

Problematics of Reliability of Road Rollers

Science.gov (United States)

Stawowiak, Michał; Kuczaj, Mariusz

2018-06-01

This article refers to the reliability of road rollers used in a selected roadworks company. Information on the method of road rollers service and how the service affects the reliability of these rollers is presented. Attention was paid to the process of the implemented maintenance plan with regard to the machine's operational time. The reliability of road rollers was analyzed by determining and interpreting readiness coefficients.

Physical soil properties and slope treatments effects on hydraulic excavator productivity for forest road construction.

Science.gov (United States)

Parsakho, Aidin; Hosseini, Seyed Ataollah; Jalilvand, Hamid; Lotfalian, Majid

2008-06-01

Effects of moisture, porosity and soil bulk density properties, grubbing time and terrain side slopes on pc 220 komatsu hydraulic excavator productivity were investigated in Miana forests road construction project which located in the northern forest of Iran. Soil moisture and porosity determined by samples were taken from undisturbed soil. The elements of daily works were measured with a digital stop watch and video camera in 14 observations (days). The road length and cross section profiles after each 20 m were selected to estimate earthworks volume. Results showed that the mean production rates for the pc 220 komatsu excavators were 60.13 m3 h(-1) and earthwork 14.76 m h(-1) when the mean depth of excavation or cutting was 4.27 m3 m(-1), respectively. There was no significant effects (p = 0.5288) from the slope classes' treatments on productivity, whereas grubbing time, soil moisture, bulk density and porosity had significantly affected on excavator earthworks volume (p < 0.0001). Clear difference was showed between the earthwork length by slope classes (p = 0.0060). Grubbing time (p = 0.2180), soil moisture (p = 0.1622), bulk density (p = 0.2490) and porosity (p = 0.2159) had no significant effect on the excavator earthworks length.

36 CFR 212.5 - Road system management.

Science.gov (United States)

2010-07-01

... construction, reconstruction, decommissioning, and maintenance. (2) Identification of unneeded roads... share of the costs. (d) Maintenance and reconstruction of National Forest System roads by users—(1... to cover maintenance or reconstruction of roads shall be used for the purposes deposited, except that...

Introducing Dual Suspension System in Road Vehicles

OpenAIRE

Imtiaz Hussain; Jawaid Daudpoto; Ali Asghar Memon

2013-01-01

The main objective of suspension system is to reduce the motions of the vehicle body with respect to road disturbances. The conventional suspension systems in road vehicles use passive elements such as springs and dampers to suppress the vibrations induced by the irregularities in the road. But these conventional suspension systems can suppress vibrations to a certain limit. This paper presents a novel idea to improve the ride quality of roads vehicles without compromising vehicle?s stability...

Salt on roads and the environment (VB)

DEFF Research Database (Denmark)

Hessberg, Philipp von; Jørgensen, Michael Søgaard

2000-01-01

This report descripes the extent of use of salt on roads in Denmark and the environmental consequences of this. Alternative strategies for reducing the risk of greasy roads and different ways of alleviating the vegetation are also discussed.The different consequences for the environment...... that this report discusses are:- The ground water.- Lakes and streams.- Plants and trees along roads.The consequences for the economy through usage of salt on roads has not been carried out....

The study of technological prevention method of road accident ...

African Journals Online (AJOL)

The study of technological prevention method of road accident related to driver and vehicle. ... road accident prevention method based on the factors studied. The study of this paper can provide forceful data analysis support for the road traffic safety related research. Keywords: road accident; accident prevention; road safety.

The scaling structure of the global road network.

Science.gov (United States)

Strano, Emanuele; Giometto, Andrea; Shai, Saray; Bertuzzo, Enrico; Mucha, Peter J; Rinaldo, Andrea

2017-10-01

Because of increasing global urbanization and its immediate consequences, including changes in patterns of food demand, circulation and land use, the next century will witness a major increase in the extent of paved roads built worldwide. To model the effects of this increase, it is crucial to understand whether possible self-organized patterns are inherent in the global road network structure. Here, we use the largest updated database comprising all major roads on the Earth, together with global urban and cropland inventories, to suggest that road length distributions within croplands are indistinguishable from urban ones, once rescaled to account for the difference in mean road length. Such similarity extends to road length distributions within urban or agricultural domains of a given area. We find two distinct regimes for the scaling of the mean road length with the associated area, holding in general at small and at large values of the latter. In suitably large urban and cropland domains, we find that mean and total road lengths increase linearly with their domain area, differently from earlier suggestions. Scaling regimes suggest that simple and universal mechanisms regulate urban and cropland road expansion at the global scale. As such, our findings bear implications for global road infrastructure growth based on land-use change and for planning policies sustaining urban expansions.

Dust emissions from unpaved roads on the Colorado Plateau

Science.gov (United States)

Duniway, M.; Flagg, C.; Belnap, J.

2013-12-01

On the Colorado Plateau, elevated levels of aeolian dust have become a major land management and policy concern due to its influence on climate, weather, terrestrial ecosystem dynamics, landscape development and fertility, melting of snow and ice, air quality, and human health. Most desert soil surfaces are stabilized by plants, rocks, and/or physical or biological soil crusts, but once disturbed, sediment production from these surfaces can increase dramatically. Road development and use is a common surface disturbing activity in the region. The extent and density of roads and road networks is rapidly increasing due to continued energy exploration, infrastructure development, and off-highway recreation activities. Though it is well known that unpaved roads produce dust, the relative contribution of dust from existing roads or the implications of future road development to regional dust loading is unknown. To address this need, we have initiated a multifaceted research effort to evaluating dust emissions from unpaved roads regionally. At 34 sites arranged across various road surfaces and soil textures in southeastern Utah, we are: 1) monitoring dust emissions, local wind conditions, and vehicle traffic and 2) evaluating fugitive dust potential using a portable wind tunnel and measuring road characteristics that affect dust production. We will then 3) develop a GIS-based model that integrates results from 1 & 2 to estimate potential dust contributions from current and future scenarios of regional road development. Passive, horizontal sediment traps were installed at three distances downwind from the road edge. One control trap was placed upwind of the samplers to account for local, non-road dust emissions. An electronic vehicle counter and anemometer were also installed at monitoring sites. Dust samples were collected every three months at fixed heights, 15 cm up to 100 cm above the soil surface, from March 2010 to the present. Threshold friction velocities (TFV

Road safety policy of the European Union.

NARCIS (Netherlands)

2013-01-01

The European Union (EU) is important for national road safety policies. The EU has several policymaking instruments, such as binding regulations and directives, and non-binding recommendations. An important element in the EU policy plans on road safety are the non-binding European road safety

Road lighting fundamentals, technology and application

CERN Document Server

van Bommel, Wout

2015-01-01

This book outlines the underlying principles on which modern road lighting is based, and provides the reader with knowledge of how these principles should be applied in practice. It offers a completely fresh approach to the subject, reflecting how the technology of road lighting has progressed to keep up with the changes in lamp technology, especially in solid state light sources, and the increasing awareness of energy use and environmental issues. The book is divided into three parts. Part One describes lighting of open roads, with chapters discussing visual performance and comfort (including the effects of mesopic vision and age), and international standards and recommendations for road lighting. Lighting equipment is introduced; specifically lamps and luminaires in terms of their practical properties and features, but also the road surface and its characteristics. A chapter on Lighting Design makes the link between theory and practice, providing the reader with the knowledge needed for effective lighting d...

Effect of Baffles on the Sloshing in Road Tankers Carrying LPG: A Comparative Numerical Study

Directory of Open Access Journals (Sweden)

J. L. Bautista-Jacobo

2015-01-01

Full Text Available This work presents a comparative numerical study of the effect of using baffles, and its design, on the behavior of sloshing in a partially filled road tanker carrying LPG. Navier-Stokes equations and standard k-ε turbulence model are used to simulate fluid movement; the Volume of Fluid (VOF method is used to track the liquid-gas interface. Velocity distributions, sloshing stabilization times, and contours of turbulent kinetic energy, which are of high importance in choosing the best design of baffles, are shown. The results show sloshing stabilization times of 22 and 21 s for road tankers with cross-shaped (Type I and X-shaped (Type II baffles, respectively, finding lower values of turbulent kinetic energy for Type II design, being, therefore, the best design of baffles for damping of sloshing and vehicle control among studied ones.

Road traffic noise and children's inattention.

Science.gov (United States)

Weyde, Kjell Vegard; Krog, Norun Hjertager; Oftedal, Bente; Magnus, Per; Øverland, Simon; Stansfeld, Stephen; Nieuwenhuijsen, Mark J; Vrijheid, Martine; de Castro Pascual, Montserrat; Aasvang, Gunn Marit

2017-11-21

An increasing number of children are exposed to road traffic noise levels that may lead to adverse effects on health and daily functioning. Childhood is a period of intense growth and brain maturation, and children may therefore be especially vulnerable to road traffic noise. The objective of the present study was to examine whether road traffic noise was associated with reported inattention symptoms in children, and whether this association was mediated by sleep duration. This study was based on the Norwegian Mother and Child Cohort Study conducted by the Norwegian Institute of Public Health. Parental reports of children's inattention at age 8 were linked to modelled levels of residential road traffic noise. We investigated the association between inattention and noise exposure during pregnancy (n = 1934), noise exposure averaged over 5 years (age 3 to 8 years; n = 1384) and noise exposure at age 8 years (n = 1384), using fractional logit response models. The participants were children from Oslo, Norway. An association with inattention at age 8 years was found for road traffic noise exposure at age 8 years (coef = .0083, CI = [.0012, .0154]; 1.2% point increase in inattention score per 10 dB increase in noise level), road traffic noise exposure average for the last 5 years (coef = .0090, CI = [.0016, .0164]; 1.3% point increase/10 dB), and for pregnancy road traffic noise exposure for boys (coef = .0091, CI = [.0010, .0171]), but not girls (coef = -.0021, CI = [-.0094, .0053]). Criteria for doing mediation analyses were not fulfilled. Results indicate that road traffic noise has a negative impact on children's inattention. We found no mediation by sleep duration.

Road user charges for heavy goods vehicles (HGV). Tables with external costs of air pollution

Energy Technology Data Exchange (ETDEWEB)

Skou Andersen, M.

2013-02-15

In this report, the European Environment Agency (EEA) presents updated estimates of the external costs of air pollution for different categories of heavy goods vehicles (HGVs). The amended Eurovignette Directive (2011/76/EU) relating to the charging of HGVs for use of major European motorways prescribes that from 2013, Member States may include air pollution costs in any charging structure for roads under the Trans-European Network (TEN-T) and for comparable domestic motorways. The tables published here provide the basis for the inclusion of a vehicle-specific air pollution component in road user charges. Air pollution costs have been calculated on the basis of the formula prescribed in the directive, taking into account the fact that road transport emissions are mixed in a low volume of air. Following Article 9 in the Eurovignette Directive, additional revenues from external-cost charges must be used by Member States to benefit the transport sector and promote sustainable mobility. Making use of scientific developments subsequent to the 2007 Handbook of external costs (Maibach et al., 2008), the EEA is able to provide an updated estimate of the external costs of air pollution from road transport. The tables in this report indicate for each country and for the relevant vehicle categories, estimates of the external costs of air pollution in 2010 prices. The high level of detail gives member countries an informed basis to group the vehicle categories for administrative purposes. The tables also include estimates for three non-EU member countries of the EEA, of which one (Switzerland) pioneered the first HGV road user charge in Europe. (LN)

Road safety in developing countries.

NARCIS (Netherlands)

Schreuder, D.A.

1991-01-01

This paper presents a classification of countries (developing and developed alike), divided into two main categories: an economical and historical entry. When road safety problems are placed into the economical context, it then appears that, among other things: (1) The road safety problem in the

A new gridded on-road CO2 emissions inventory for the United States, 1980-2011

Science.gov (United States)

Gately, C.; Hutyra, L.; Sue Wing, I.

2013-12-01

On-road transportation is responsible for 28% of all U.S. fossil fuel CO2 emissions. However, mapping vehicle emissions at regional scales is challenging due to data limitations. Existing emission inventories have used spatial proxies such as population and road density to downscale national or state level data, which may introduce errors where the proxy variables and actual emissions are weakly correlated. We have developed a national on-road emissions inventory product based on roadway-level traffic data obtained from the Highway Performance Monitoring System. We produce annual estimates of on-road CO2 emissions at a 1km spatial resolution for the contiguous United States for the years 1980 through 2011. For the year 2011 we also produce an hourly emissions product at the 1km scale using hourly traffic volumes from hundreds of automated traffic counters across the country. National on-road emissions rose at roughly 2% per year from 1980 to 2006, with emissions peaking at 1.71 Tg CO2 in 2007. However, while national emissions have declined 6% since the peak, we observe considerable regional variation in emissions trends post-2007. While many states show stable or declining on-road emissions, several states and metropolitan areas in the Midwest, mountain west and south had emissions increases of 3-10% from 2008 to 2011. Our emissions estimates are consistent with state-reported totals of gasoline and diesel fuel consumption. This is in contrast to on-road CO2 emissions estimated by the Emissions Database of Global Atmospheric Research (EDGAR), which we show to be inconsistent in matching on-road emissions to published fuel consumption at the scale of U.S. states, due to the non-linear relationships between emissions and EDGAR's chosen spatial proxies at these scales. Since our emissions estimates were generated independent of population density and other demographic data, we were able to conduct a panel regression analysis to estimate the relationship between these

5 CFR 930.107 - Waiver of road test.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Waiver of road test. 930.107 Section 930....107 Waiver of road test. Under the following conditions, OPM or an agency head or his or her designated representative may waive the road test: (a) OPM waives the road test requirement for operators of...

Traffic mortality and the role of minor roads.

Science.gov (United States)

van Langevelde, Frank; van Dooremalen, Coby; Jaarsma, Catharinus F

2009-01-01

Roads have large impacts on wildlife, as they form one of the principal causes of mortality, and disturbance and fragmentation of habitat. These impacts are mainly studied and mitigated on major roads. It is, however, a widespread misconception that most animals are killed on major roads. In this paper, we argue that minor roads have a larger impact on wildlife with respect to habitat destruction, noise load and traffic mortality. We use data on traffic related deaths in badgers (Meles meles) in The Netherlands to illustrate that traffic mortality is higher on minor roads. We ask for a more extensive investigation of the environmental impacts of minor roads. Moreover, we argue that the success of mitigation on roads drastically increases when both major and minor roads are integrated in the planning of traffic flows. Therefore, we propose a strategy based on the concept of a "traffic-calmed area". Traffic-calmed areas create opportunities for wildlife by decreasing limitations for animal movement. We ask for further studies to estimate what size traffic-calmed areas should be to maintain minimum viable animal populations.

Extended investigation on road fatality in Brunei.

Science.gov (United States)

Yusof, N B; Hoque, M A; Steele, M C; Yong, S Y

2018-06-08

Road fatality is one of the leading causes of death in Brunei with 79 deaths in 1993, the highest ever recorded. The Brunei government has been trying to reduce this by implementing new traffic measures and successfully reduced fatalities to 24 fatalities in 2014. Yearly road fatality has been fluctuating, but there has been a declining tendency overall. The aim of this study is to investigate road fatality in Brunei by extending the research. We developed a multiple regression model and carried out an analysis on road fatality in Brunei. Our analysis indicates that the road fatality appears to rise depending on the increase in the number of young drivers between 15 to 24 years and the number of unemployed people. Comparisons of Brunei road fatality rate per 10,000 vehicles are made with some other countries and we conclude that Brunei has approximately the same rate as Australia in 2014.

Comparison of heavy metal loads in stormwater runoff from major and minor urban roads using pollutant yield rating curves

International Nuclear Information System (INIS)

Davis, Brett; Birch, Gavin

2010-01-01

Trace metal export by stormwater runoff from a major road and local street in urban Sydney, Australia, is compared using pollutant yield rating curves derived from intensive sampling data. The event loads of copper, lead and zinc are well approximated by logarithmic relationships with respect to total event discharge owing to the reliable appearance of a first flush in pollutant mass loading from urban roads. Comparisons of the yield rating curves for these three metals show that copper and zinc export rates from the local street are comparable with that of the major road, while lead export from the local street is much higher, despite a 45-fold difference in traffic volume. The yield rating curve approach allows problematic environmental data to be presented in a simple yet meaningful manner with less information loss. - A simple method for representing data onroad runoff pollution allows comparisons among dissimilar sites and could form the basis for a pollution database.

Estimation of Road Traffic Mortality in Kurdistan Province, Iran, During 2004-2009, Using Capture-Recapture Method

Directory of Open Access Journals (Sweden)

Lida Gorgin

2016-04-01

Full Text Available Background: To reduce traffic injuries in the country, health professionals should have accurate estimates of road traffic deaths. Multiple and sometimes inconsistent statistics presented by organizations in charge create high degree of uncertainty for planners and decision makers. To achieve an accurate estimate, several methods are available. Of them, capture-recapture method seems to be an appropriate and affordable method regarding the reliability of the data sources. This study aimed to estimate the number of road traffic deaths in Kurdistan Province during 2004-2009, using capture-recapture method and based on 2 sources of data obtained from Death Registration System and Forensic Medicine Department. Materials and Methods: All deaths due to road traffic accidents in Kurdistan Province were extracted during 2004-2009. These deaths were legally registered in Death Registration System and Forensic Medicine Department. Shared cases among these 2 sources were identified based on full name, age, gender, and date of death and finally the accurate number of deaths was calculated using the correct volume formula. Results: During study period, Forensic Medicine Department of the province had registered about 3289 cases of road traffic mortalities and Death Registration System had registered 3771 cases of death resulting from road traffic accidents. Using capture-recapture method, the number of deaths in the same years was estimated as 5726 people (5818-5634:CI95%. The proportion of mortality registered in the Death Registration System and Forensic Medicine Department of the province to the total estimated deaths were 65.8% and 57.4%, respectively and both systems together covered 85.4% of road traffic deaths, i.e. under-reporting of about 832 people. Conclusion: The results of the present study indicate that none of 2 sources of Forensic Medicine Department and Death Registration System, per se or both, fully covered road traffic mortalities and

Road dust from pavement wear and traction sanding

Energy Technology Data Exchange (ETDEWEB)

Kupiainen, K.

2007-07-01

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is 'road dust'. The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: (i) How do traction

Monitoring Heavy Metal Contents with Sphagnum Junghuhnianum Moss Bags in Relation to Traffic Volume in Wuxi, China

Directory of Open Access Journals (Sweden)

Rong Hu

2018-02-01

Full Text Available Despite its small size, a moss bag can reveal the different temporal and spatial deposition patterns of pollutants at a particular site; therefore, researchers can use moss bags to determine pollution sources and to put forward strategies for pollution control. Although the use of moss bags to monitor atmospheric pollution has been widely reported in Europe, there are few such empirical studies in China. Thus, in this study, bags containing the moss Sphagnum junghuhnianum were used to assess the concentrations of heavy metals (chromium (Cr, copper (Cu, lead (Pb, vanadium (V, and zinc (Zn at five sampling sites (four roads and a forest park during the summer and winter of 2012. According to the relative accumulation factor (RAF and contamination factor (CF results, pollution in winter was heavier than that in summer, and Cr was found to be the most contaminating, having the highest mean CF. There was a significant positive correlation (p < 0.05 between traffic volume and concentration for three heavy metals (Cr, Cu, and V in winter, whereas a significant positive correlation (p < 0.05 was observed between traffic volume and concentrations for four heavy metal elements (Cr, Pb, V, and Zn in summer, indicating a close relationship between heavy metal contents and traffic volume. Although there was substantial variation in the concentrations of the five heavy metals in the moss bags, significant correlations between heavy metals suggested that the contaminants originated from a common source, namely vehicle emissions. The results demonstrated that the four roads were subject to different degrees of pollution depending on the volume of traffic using each road. Therefore, the results of this study suggest that traffic volume is a major reason for heavy metal pollution.

Large roads reduce bat activity across multiple species.

Science.gov (United States)

Kitzes, Justin; Merenlender, Adina

2014-01-01

Although the negative impacts of roads on many terrestrial vertebrate and bird populations are well documented, there have been few studies of the road ecology of bats. To examine the effects of large roads on bat populations, we used acoustic recorders to survey bat activity along ten 300 m transects bordering three large highways in northern California, applying a newly developed statistical classifier to identify recorded calls to the species level. Nightly counts of bat passes were analyzed with generalized linear mixed models to determine the relationship between bat activity and distance from a road. Total bat activity recorded at points adjacent to roads was found to be approximately one-half the level observed at 300 m. Statistically significant road effects were also found for the Brazilian free-tailed bat (Tadarida brasiliensis), big brown bat (Eptesicus fuscus), hoary bat (Lasiurus cinereus), and silver-haired bat (Lasionycteris noctivagans). The road effect was found to be temperature dependent, with hot days both increasing total activity at night and reducing the difference between activity levels near and far from roads. These results suggest that the environmental impacts of road construction may include degradation of bat habitat and that mitigation activities for this habitat loss may be necessary to protect bat populations.

Effects of roads and well pads on erosion in the Largo Canyon watershed, New Mexico, 2001-02

Science.gov (United States)

Matherne, Anne Marie

2006-01-01

hillslopes and dams below roads. The average erosion rates estimated from the data collected during this study most likely represent minimum erosion rates. Sediment-accumulation data for measurement intervals and for dams that were breached during 2002, resulting from the large volume of runoff generated by high-intensity storms, were not used to compute erosion rates. For this reason, the higher range of erosion rates is underrepresented and the results of this study are biased toward the lower end of the range of erosion rates. Measurements along road transects generally indicate that sediment is eroded from the top of road berms and redeposited at the base of the berms and may be transported downslope along the road. Measurements along well-pad transects generally indicate that sediment eroded from hillslopes is transported over the surface of the well pad and down the well-pad edges. Based on field observations, roads aligned parallel to topographic contours facilitate erosional processes in two ways: (1) roads cut across and collect runoff from previously established drainages and (2) roads, where they are cut into hillsides or into the land surface, provide focal points for the initiation of erosion. Roads aligned across topographic contours can serve as conduits to channel runoff but do not constitute a large percentage of the road network.

EFFECT OF A ROAD SAFETY EDUCATION INTERVENTION ON ROAD SAFETY KNOWLEDGE OF UNIVERSITY DRIVERS IN IBADAN, NIGERIA.

Science.gov (United States)

Olumide, A O; Owoaje, E T

2016-06-01

It is essential for drivers employed in the formal sector to have good knowledge of road safety in order to safeguard their lives and those of the staff they are employed to drive. The study was conducted to determine the effect of a road safety education intervention on road safety knowledge of drivers employed in the University of Ibadan, Nigeria. A quasi-experimental study of 98 intervention and 78 control drivers selected using a cluster sampling technique was conducted. The intervention comprised a two-day training on road safety and first aid. The drivers' knowledge of road safety was measured at baseline, immediately and 4-months post-intervention. Aggregate scores of road safety knowledge were computed giving minimum and maximum obtainable scores of 0 and 16 respectively. Change in mean scores over the three measurement periods was assessed using Repeated Measures Analysis of Variance (ANOVA). Independent t-test was used to compare the scores between intervention and control drivers at each of the assessment periods. Twenty-nine drivers did not complete the study (attrition rate = 16.5%). At baseline, mean road safety knowledge scores for the intervention and control drivers were 12.7±2.2 and 12.9± 2.3 (p = 0.510) respectively. Immediately and four months post intervention, the scores of the intervention drivers were 13.8±1.9 and 12.8±1.6; while scores for the controls were 13.3±2.0 and 13.2±1.8. Repeated measures ANOVA revealed that the increase in knowledge over the three assessment periods was not statistically significant. The intervention resulted in an initial increase in road safety knowledge of the intervention drivers. However, this was not sustained to the forth month post-intervention. This finding suggests periodic refresher trainings to sustain the knowledge acquired.

The Use of Theatre Tours in Road Safety Education.

Science.gov (United States)

Powney, Janet; And Others

The Scottish Road Safety Campaign and the Road Safety Council of Wales have made a large investment in theater tours as a method of providing road safety education. This study aimed to evaluate the effectiveness of a road safety message delivered by a theater group, Road Safety Officers (RSOs), or, teachers for pupils in upper secondary classes.…

Network Screening for Smarter Road Sites: A Regional Case

Directory of Open Access Journals (Sweden)

Attila Grieco

2014-05-01

Full Text Available Road safety has been a main societal and policy issue in many European countries since the early years of last decade. After the 2000-2010 Road Safety Programme launched by the European Commission, in 2011 the Commission adopted the new 2020 programme, even more demanding than the previous. As the societal consequences of road casualties are increasingly perceived as a core dimension of smart mobility, road safety system is now facing new challenges. Current mobility shifts to softer and greener transportation means raise new safety concerns for an increasingly larger share of vulnerable road users. The need to integrate road safety requirements with other residential, mobility, and environmental policies calls for a more detailed understanding of the phenomenon at different spatial levels and with different observation lenses. The pilot study described in this paper is a contribution to this end. It aims at identifying the accident prone sites of the regional road network to help prioritizing safety interventions, by the regional administration having road planning responsibilities. The study develops a screening approach to select hazardous road locations, outside urban premises, from the Piedmont provincial and state roads. The most recent data for the 2010-2012 years were considered, drawn from the ISTAT road accident database, managed by the CMRSS. The procedure consists of the following steps: identification of the elementary road sections to be screened, through a GIS analysis; definition of the screening groups (road sections have been subdivided in 4 length classes; definition of the selection criteria, with two severity thresholds based on the crash density; classification of the elementary road sections by severity thresholds.

Residential proximity to major roads and term low birth weight: the roles of air pollution, heat, noise, and road-adjacent trees.

Science.gov (United States)

Dadvand, Payam; Ostro, Bart; Figueras, Francesc; Foraster, Maria; Basagaña, Xavier; Valentín, Antònia; Martinez, David; Beelen, Rob; Cirach, Marta; Hoek, Gerard; Jerrett, Michael; Brunekreef, Bert; Nieuwenhuijsen, Mark J

2014-07-01

Maternal residential proximity to roads has been associated with adverse pregnancy outcomes. However, there is no study investigating mediators or buffering effects of road-adjacent trees on this association. We investigated the association between mothers' residential proximity to major roads and term low birth weight (LBW), while exploring possible mediating roles of air pollution (PM(2.5), PM(2.5-10), PM(10), PM(2.5) absorbance, nitrogen dioxide, and nitrogen oxides), heat, and noise and buffering effect of road-adjacent trees on this association. This cohort study was based on 6438 singleton term births in Barcelona, Spain (2001-2005). Road proximity was measured as both continuous distance to and living within 200 m from a major road. We assessed individual exposures to air pollution, noise, and heat using, respectively, temporally adjusted land-use regression models, annual averages of 24-hour noise levels across 50 m and 250 m, and average of satellite-derived land-surface temperature in a 50-m buffer around each residential address. We used vegetation continuous fields to abstract tree coverage in a 200-m buffer around major roads. Living within 200 m of major roads was associated with a 46% increase in term LBW risk; an interquartile range increase in heat exposure with an 18% increase; and third-trimester exposure to PM(2.5), PM(2.5-10), and PM10 with 24%, 25%, and 26% increases, respectively. Air pollution and heat exposures together explained about one-third of the association between residential proximity to major roads and term LBW. Our observations on the buffering of this association by road-adjacent trees were not consistent between our 2 measures of proximity to major roads. An increased risk of term LBW associated with proximity to major roads was partly mediated by air pollution and heat exposures.

Road safety and trade and industry.

OpenAIRE

2014-01-01

Trade and industry mostly experience the negative consequences of crashes, but sometimes the consequences are positive. The negative consequences of road traffic crashes include loss of personnel and damage to vehicles. Some other industries, such as damage repair companies, on the other hand, derive income from road crashes. Trade and industry can also be of importance for road safety. Particularly the transport sector, the car industry and insurers take several initiatives which for example...

Self regulation initiative in heavy vehicle transport to address road safety, accelerated road deterioration and transport productivity in South Africa

CSIR Research Space (South Africa)

Nordengen, Paul A

2006-06-01

Full Text Available Heavy vehicle overloading and road safety continue to be major problems in South Africa notwithstanding efforts at more effective enforcement by the road and traffic authorities. Overloading causes premature road deterioration and, together...

Second-best Road Pricing through Highway Franchising

NARCIS (Netherlands)

Verhoef, E.T.

2007-01-01

This paper considers the welfare impacts of a range of franchising regimes for congestible highways. For a single road in isolation, it is shown that a competitive auction with the level of road use as the decision criterion produces the socially optimal road (in terms of capacity and toll level),

Quantification of Gravel Rural Road Sediment Production

Science.gov (United States)

Silliman, B. A.; Myers Toman, E.

2014-12-01

Unbound rural roads are thought to be one of the largest anthropogenic sources of sediment reaching stream channels in small watersheds. This sediment deposition can reduce water quality in the streams negatively impacting aquatic habitat as well as impacting municipal drinking water sources. These roads are thought to see an increase in construction and use in southeast Ohio due to the expansion of shale gas development in the region. This study set out to quantify the amount of sediment these rural roads are able to produce. A controlled rain event of 12.7 millimeters of rain over a half hour period was used to drive sediment production over a 0.03 kilometer section of gravel rural road. These 8 segments varied in many characteristics and produced from 2.0 to 8.4 kilograms of sediment per 0.03 kilometers of road with the average production over the 8 segments being 5.5 kilograms of sediment. Sediment production was not strongly correlated with road segment slope but traffic was found to increase sediment production from 1.1 to 3.9 times as much sediment after traffic use. These results will help inform watershed scale sediment budgeting, and inform best management practices for road maintenance and construction. This study also adds to the understanding of the impacts of rural road use and construction associated with the changing land use from agricultural to natural gas extraction.

Major Roads

Data.gov (United States)

Minnesota Department of Natural Resources — This data set contains roadway centerlines for major roads (interstates and trunk highways) found on the USGS 1:24,000 mapping series. These roadways are current...

Small-scale geodiversity and dirt road management, Ede (NL)

Science.gov (United States)

van den Ancker, Hanneke; Jungerius, Pieter Dirk

2016-04-01

A large part of the countryside roads on the Pleistocene sands of The Netherlands are dirt roads. Most are footpaths, but a small percentage are relatively heavily used by motorized vehicles. These latter roads are a cause subject of debate. Puddles and potholes develop during periods of wet weather, while dust whirls from the roads form during spells of dry weather as do washboard ripples. They cause problems for people living along these roads and tourists (walkers and bikers. The community of Ede (NL), like many other communities on the sand, wants to keep its 80 km of dirt roads because of the natural values they harbour as well as for their characteristic landscape quality and cultural heritage value. A part of the dirt roads in Ede is heavily used. In 2009, the community of Ede developed a decision model to support management of the dirt roads. Ede acknowledges that each dirt road is unique and asks for a tailor-made solution. Road maintenance measures include grading, making a camber, digging pits, applying loam or sandy loam. If problems become too large, one-way traffic can be an option. In more and more cases the dirt roads are barred for motorized through traffic (Gemeente Ede, 2009). As a reconnaissance we have studied the dirt roads of the Horabos/Horalaan over the last year. Incidentally we looked at other parts of the main Horalaan and the footpaths in the adjacent forest of Hoekelum. All dirt roads lie near the top of a Saalian push-moraine in which the upper course of dry valleys are present. Some results of the reconnaissance: - Most dirt roads sections in the Horabos lie lower than the surrounding terrain; - The problems develop in a short period of time during special weather conditions; - Certain dirt road sections e.g. those sections crossing a slight depression are quickly developing potholes; - Even a small slope of the road (differences that have consequences for its maintenance. Knowledge of geodiversity of the terrain and study of small

New optimization strategies of pavement maintenance: A case study for national road network in Indonesia using integrated road management system

Science.gov (United States)

Hamdi, Hadiwardoyo, Sigit P.; Correia, A. Gomes; Pereira, Paulo

2017-06-01

A road network requires timely maintenance to keep the road surface in good condition onward better services to improve accessibility and mobility. Strategies and maintenance techniques must be chosen in order to maximize road service level through cost-effective interventions. This approach requires an updated database, which the road network in Indonesia is supported by a manual and visual survey, also using NAASRA profiler. Furthermore, in this paper, the deterministic model of deterioration was used. This optimization model uses life cycle cost analysis (LCCA), applied in an integrated manner, using IRI indicator, and allows determining the priority of treatment, type of treatment and its relation to the cost. The purpose of this paper was focussed on the aspects of road maintenance management, i.e., maintenance optimization models for different levels of traffic and various initial of road distress conditions on the national road network in Indonesia. The implementation of Integrated Road Management System (IRMS) can provide a solution to the problem of cost constraints in the maintenance of the national road network. The results from this study found that as the lowest as agency cost, it will affect the increasing of user cost. With the achievement of the target plan scenario Pl000 with initial value IRI 2, it was found that the routine management throughout the year and in early reconstruction and periodic maintenance with a 30 mm thick overlay, will simultaneously provide a higher net benefit value and has the lowest total cost of transportation.

Evaluation of Shortest Paths in Road Network

Directory of Open Access Journals (Sweden)

Farrukh Shehzad

2009-06-01

Full Text Available Optimization is a key factor in almost all the topics of operations research / management science and economics.The road networks can be optimized within different constraints like time, distance, cost and traffic running onthe roads.This study is based on optimization of real road network by means of distances. Two main objectives arepursued in this research: 1 road distances among different routes are composed in detail; 2 two standardalgorithms (Dijkstra and Floyd-Warshall algoritms are applied to optimize/minimize these distances for bothsingle-source and all-pairs shortest path problems.