Thorium effect on the oxidation of uranium: Photoelectron spectroscopy (XPS/UPS) and cyclic voltammetry (CV) investigation on (U{sub 1−x}Th{sub x})O{sub 2} (x = 0 to 1) thin films

Energy Technology Data Exchange (ETDEWEB)

Cakir, P., E-mail: pelincakir@outlook.com [European Commission, Joint Research Centre, P.O. Box 2340, D-76125, Karlsruhe (Germany); Department of Radiation Science and Technology, Delft University of Technology, Mekelweg 15, 2629, JB Delft (Netherlands); Eloirdi, R.; Huber, F. [European Commission, Joint Research Centre, P.O. Box 2340, D-76125, Karlsruhe (Germany); Konings, R.J.M. [European Commission, Joint Research Centre, P.O. Box 2340, D-76125, Karlsruhe (Germany); Department of Radiation Science and Technology, Delft University of Technology, Mekelweg 15, 2629, JB Delft (Netherlands); Gouder, T. [European Commission, Joint Research Centre, P.O. Box 2340, D-76125, Karlsruhe (Germany)

2017-01-30

Highlights: • XRD and XPS data of U{sub x}Th{sub 1-x}O{sub 2} films are in agreement with data obtained on bulk. • Oxygen affinity of thorium is much stronger than uranium. • Oxidation of uranium decreases as a function of thorium in the matrix. • XPS made pre and post CV shows thorium enrichment indicating a protective layer. • Higher initial uranium content is directly proportional to higher oxidation states. - Abstract: Thin films of U{sub 1−x}Th{sub x}O{sub 2} (x = 0 to 1) have been deposited via reactive DC sputter technique and characterized by X-ray/Ultra-violet Photoelectron Spectroscopy (XPS/UPS), X-ray Powder Diffractometer (XRD) and Cyclic Voltammetry (CV) in order to understand the effect of Thorium on the oxidation mechanism. During the deposition, the competition between uranium and thorium for oxidation showed that thorium has a much higher affinity for oxygen. Deposition conditions, time and temperature were also the subject of this study, to look at the homogeneity and the stability of the films. While core level and valence band spectra were not altered by the time of deposition, temperature was affecting the oxidation state of uranium and the valence band due to the mobility increase of oxygen through the film. X-ray diffraction patterns, core level spectra obtained for U{sub 1−x}Th{sub x}O{sub 2} versus the composition showed that lattice parameters follow the Vegard's law and together with the binding energies of U-4f and Th-4f are in good agreement with literature data obtained on bulk compounds. To study the effect of thorium on the oxidation of U{sub 1−x}Th{sub x}O{sub 2} films, we used CV experiments at neutral pH of a NaCl solution in contact with air. The results indicated that thorium has an effect on the uranium oxidation as demonstrated by the decrease of the current of the oxidation peak of uranium. XPS measurements made before and after the CV, showed a relative enrichment of thorium at the extent of uranium at

Direct electrodeposition of gold nanotube arrays of rough and porous wall by cyclic voltammetry and its applications of simultaneous determination of ascorbic acid and uric acid

Energy Technology Data Exchange (ETDEWEB)

Yang Guangming, E-mail: yangguangmingbs@126.com [Department of Resources and Environment, Baoshan University, Baoshan 678000 (China); Ling, Li [Department of Resources and Environment, Baoshan University, Baoshan 678000 (China); Jinhe, Jiang; Yunhui, Yang [College of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650092 (China)

2012-08-01

Gold nanotube arrays of rough and porous wall has been synthesized by direct electrodeposition with cyclic voltammetry utilizing anodic aluminum oxide template (AAO) and polycarbonate membrane (PC) during short time (only 3 min and 2 min, respectively). The mechanism of the direct electrodeposition of gold nanotube arrays by cyclic voltammetry (CV) has been discussed. The morphological characterizations of the gold nanotube arrays have been investigated by scanning electron microscopy (SEM). A simultaneous determination of ascorbic acid (AA) and uric acid (UA) by differential pulse voltammetry (DPV) was constructed by attaching gold nanotube arrays (using AAO) onto the surface of a glassy carbon electrode (GCE). The electrochemical behavior of AA and UA at this modified electrode has been studied by CV and differential pulse voltammetry (DPV). The sensor offers an excellent response for AA and UA and the linear response range for AA and UA were 1.02 Multiplication-Sign 10{sup -7}-5.23 Multiplication-Sign 10{sup -4} mol L{sup -1} and 1.43 Multiplication-Sign 10{sup -7}-4.64 Multiplication-Sign 10{sup -4} mol L{sup -1}, the detection limits were 1.12 Multiplication-Sign 10{sup -8} mol L{sup -1} and 2.24 Multiplication-Sign 10{sup -8} mol L{sup -1}, respectively. This sensor shows good regeneration, stability and selectivity and has been used for the determination of AA and UA in real human urine and serum samples with satisfied results. - Graphical abstract: The schematic diagram of formation of Au nanotube arrays (a) and the stepwise procedure of the sensor (b). Highlights: Black-Right-Pointing-Pointer Gold nanotubes array has been synthesized by cyclic voltammetry. Black-Right-Pointing-Pointer The mechanism of deposition of gold nanotube has been discussed. Black-Right-Pointing-Pointer A determination of ascorbic acid and uric acid was constructed by gold array. Black-Right-Pointing-Pointer A satisfied determination of samples can be obtained by this sensor.

Voltammetry study of quinoxaline in aqueous electrolytes

International Nuclear Information System (INIS)

Milshtein, Jarrod D.; Su, Liang; Liou, Catherine; Badel, Andres F.; Brushett, Fikile R.

2015-01-01

Organic compounds have recently received considerable attention as active materials in redox flow batteries (RFBs) due to their good electrochemical reversibility, high theoretical energy densities, and promise for low cost production. Until now, organic active material candidates for aqueous RFBs have been limited to the quinone family, a set of aromatic-derived organic molecules, distinguished by an even number of ketone (R−C(=O)−R′) groups. This work aims to elucidate and optimize the electrochemical behavior of quinoxaline, an organic molecule consisting of fused benzene and pyrazine rings, in aqueous electrolytes. More than 30 electrolytes are screened by cyclic voltammetry, and the five most promising electrolytes are investigated further using rotating disk voltammetry. Electrochemical behavior of quinoxaline shows pH dependent thermodynamics and reaction mechanisms, while chloride-containing supporting electrolytes greatly enhance solubility. This study sheds light on the promising characteristics of quinoxaline as a low potential compound for aqueous RFBs; quinoxaline has a redox potential of E° ≈ −0.02 V vs. RHE, is soluble up to ∼4.5 M in water, exhibits a two-electron transfer capability, and possesses a low molecular weight (130.15 g mol"−"1), resulting in a theoretical capacity of 410 mAh g"−"1.

Smartphone-based cyclic voltammetry system with graphene modified screen printed electrodes for glucose detection.

Science.gov (United States)

Ji, Daizong; Liu, Lei; Li, Shuang; Chen, Chen; Lu, Yanli; Wu, Jiajia; Liu, Qingjun

2017-12-15

Smartphone-based electrochemical devices have such advantages as the low price, miniaturization, and obtaining the real-time data. As a popular electrochemical method, cyclic voltammetry (CV) has shown its great practicability for quantitative detection and electrodes modification. In this study, a smartphone-based CV system with a simple method of electrode modification was constructed to perform electrochemical detections. The system was composed of these main portions: modified electrodes, portable electrochemical detector and smartphone. Among them, the detector was comprised of an energy transformation module applying the stimuli signals, and a low-cost potentiostat module for CV measurements with a Bluetooth module for transmitting data and commands. With an Application (App), the smartphone was used as the controller and displayer of the system. Through controlling of different scan rates, the smartphone-based system could perform CV detections for redox couples with test errors less than 3.8% compared to that of commercial electrochemical workstation. Also, the reduced graphene oxide (rGO) and sensitive substance could be modified by the system on the screen printed electrodes for detections. As a demonstration, 3-amino phenylboronic acid (APBA) was used as the sensitive substance to fabricate a glucose sensor. Finally, the experimental data of the system were shown the linear, sensitive, and specific responses to glucose at different doses, even in blood serum as low as about 0.026mM with 3δ/slope calculation. Thus, the system could show great potentials of detection and modification of electrodes in various fields, such as public health, water monitoring, and food quality. Copyright © 2017 Elsevier B.V. All rights reserved.

Cyclic voltammetry deposition of copper nanostructure on MWCNTs modified pencil graphite electrode: An ultra-sensitive hydrazine sensor

Energy Technology Data Exchange (ETDEWEB)

Heydari, Hamid [Faculty of Sciences, Razi University, Kermanshah (Iran, Islamic Republic of); Gholivand, Mohammad B., E-mail: mbgholivand@razi.ac.ir [Faculty of Sciences, Razi University, Kermanshah (Iran, Islamic Republic of); Abdolmaleki, Abbas [Department of Chemistry, Malek Ashtar University of Technology, Tehran (Iran, Islamic Republic of)

2016-09-01

In this study, Copper (Cu) nanostructures (CuNS) were electrochemically deposited on a film of multiwall carbon nanotubes (MWCNTs) modified pencil graphite electrode (MWCNTs/PGE) by cyclic voltammetry method to fabricate a CuNS–MWCNTs composite sensor (CuNS–MWCNT/PGE) for hydrazine detection. Scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDX) were used for the characterization of CuNS on the MWCNTs matrix. The composite of CuNS-MWCNTs was characterized with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The preliminary studies showed that the proposed sensor have a synergistic electrocatalytic activity for the oxidation of hydrazine in phosphate buffer. The catalytic currents of square wave voltammetry had a linear correlation with the hydrazine concentration in the range of 0.1 to 800 μM with a low detection limit of 70 nM. Moreover, the amperometric oxidation current exhibited a linear correlation with hydrazine concentration in the concentration range of 50–800 μM with the detection limit of 4.3 μM. The proposed electrode was used for the determination of hydrazine in real samples and the results were promising. Empirical results also indicated that the sensor had good reproducibility, long-term stability, and the response of the sensor to hydrazine was free from interferences. Moreover, the proposed sensor benefits from simple preparation, low cost, outstanding sensitivity, selectivity, and reproducibility for hydrazine determination. - Highlights: • The Copper nanostructures (CuNS) were prepared by cyclic voltammetry deposition. • The CuNS-MWCNT/PGE sensor shows high activity toward hydrazine (N{sub 2}H{sub 4}). • The proposed sensor exhibits a wide linear range (0.1 to 800 μM), low detection limit (70 nM), high sensitivity and stability for hydrazine.

Optimising carbon electrode materials for adsorptive stripping voltammetry

OpenAIRE

Chaisiwamongkhol, K; Batchelor-McAuley, C; Sokolov, S; Holter, J; Young, N; Compton, R

2017-01-01

Different types of carbon electrode materials for adsorptive stripping voltammetry are studied through the use of cyclic voltammetry. Capsaicin is utilised as a model compound for adsorptive stripping voltammetry using unmodified and modified basal plane pyrolytic graphite (BPPG) electrodes modified with multi-walled carbon nanotubes, carbon black or graphene nanoplatelets, screen printed carbon electrodes (SPE), carbon nanotube modified screen printed electrodes, and carbon paste electrodes....

Probing the electrochemical double layer of an ionic liquid using voltammetry and impedance spectroscopy: a comparative study of carbon nanotube and glassy carbon electrodes in [EMIM](+)[EtSO(4)](-).

Science.gov (United States)

Zheng, J P; Goonetilleke, P C; Pettit, C M; Roy, D

2010-05-15

Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are compared as techniques for analyzing double layer capacitances of ionic liquids (ILs) at the surfaces of two carbon-based electrodes. These systems are relevant for energy storage supercapacitors and often are associated with unconventional electrochemical properties. Certain theoretical and experimental aspects of CV and EIS necessary for quantitative evaluation of the capacitance characteristics of such systems are explored. The experiments use 1-ethyl-3-methyl imidazolium ethylsulfate as a model IL electrolyte in combination with a porous electrode of carbon nanotubes (CNTs). The results are compared with those obtained with a nonporous glassy carbon (GC) electrode. The time is constant, and hence the power delivery characteristics of the experimental cell are affected by the electrolyte resistance and residual faradaic reactions of the IL, as well as by the spatially inhomogeneous electrode surfaces. It is shown that adequate characterization of these IL-electrode systems can be achieved by combining CV with EIS. A phenomenological framework for utilizing this combination is discussed.

Facilitated ion transfer of protonated primary organic amines studied by square wave voltammetry and chronoamperometry

Energy Technology Data Exchange (ETDEWEB)

Torralba, E. [Departamento de Química Física, Facultad de Química, Universidad de Murcia, Murcia 30100 (Spain); Ortuño, J.A. [Departamento de Química Analítica, Facultad de Química, Universidad de Murcia, Murcia 30100 (Spain); Molina, A., E-mail: amolina@um.es [Departamento de Química Física, Facultad de Química, Universidad de Murcia, Murcia 30100 (Spain); Serna, C. [Departamento de Química Física, Facultad de Química, Universidad de Murcia, Murcia 30100 (Spain); Karimian, F. [Department of Chemistry, Faculty of Sciences, Ferdowsi University of Mashhad, Mashhad (Iran, Islamic Republic of)

2014-05-01

Highlights: • Facilitated ion transfer of organic protonated amines is studied. • Cyclic square wave voltammetry is used as main technique. • Complexation constants and standard ion transfer potentials are determined. • Diffusion coefficients in the organic and aqueous phases are determined. • The goodness of square wave voltammetry as analytical tool is shown. - Abstract: The transfer of the protonated forms of heptylamine, octylamine, decylamine, procaine and procainamide facilitated by dibenzo-18-crown-6 from water to a solvent polymeric membrane has been investigated by using cyclic square wave voltammetry. The experimental voltammograms obtained are in good agreement with theoretical predictions. The values of the standard ion transfer potential, complexation constant and diffusion coefficient in water have been obtained from these experiments, and have been used to draw some conclusions about the lipophilicity of these species and the relative stability of the organic ammonium complexes with dibenzo-18-crown-6. The results have been compared with those provided by linear sweep voltammetry. Calibration graphs were obtained with both techniques. An interesting chronoamperometric method for the determination of the diffusion coefficient of the target ion in the membrane has been developed and applied to all these protonated amines.

A Study on the Copper Effect on gold leaching in copper-ethanediamine-thiosulphate solutions

Science.gov (United States)

Liu, Qiong; Xiang, Pengzhi; Huang, Yao

2018-01-01

A simple, fast and sensitive square-wave voltammetry (SWV), cyclic voltammetry(CV) and tafel method for the determination of various factors of gold in thiosulphate solution in this paper. We present our study on the effect of copper(II) on the leaching of gold in thiosulphate solutions. The current study aims to establish the interaction of copper in the leaching process by electrochemical method.

Cyclic voltammetry and reduction mechanistic studies of styrylpyrylium perchlorates

Directory of Open Access Journals (Sweden)

Y. L. Bonzi-Coulibaly

2013-04-01

Full Text Available The reduction and oxidation potentials of methylated 4-styrylpyrylium and 6-styrylpyrylium perchlorates have been evaluated using cyclic voltammetry, in comparison to their non-methylated derivatives values. The reduction peak of all studied compounds remained chemically irreversible. The presence of the electron-donating methyl group on pyrylium ring leads to a shift of the styrylpyrylium perchlorates reduction potential towards cathodic values. Kinetic studies on platinum electrodes based on the variation of the peak potential at different scan rates and upon substrate concentrations confirm, in another way, the mechanism of electron transfer.DOI: http://dx.doi.org/10.4314/bcse.v27i1.12

Study of temperature, air dew point temperature and reactant flow effects on proton exchange membrane fuel cell performances using electrochemical spectroscopy and voltammetry techniques

Energy Technology Data Exchange (ETDEWEB)

Wasterlain, S.; Hissel, D. [FC LAB, Techn' Hom, rue Thierry Mieg, 90010 Belfort Cedex (France); FEMTO-ST (UMR CNRS 6174), ENISYS Department, University of Franche-Comte, Techn' Hom, rue Thierry Mieg, 90010 Belfort Cedex (France); Candusso, D.; Harel, F. [FC LAB, Techn' Hom, rue Thierry Mieg, 90010 Belfort Cedex (France); INRETS, The French National Institute for Transport and Safety Research, Techn' Hom, rue Thierry Mieg, 90010 Belfort Cedex (France); Bergman, P.; Menard, P.; Anwar, M. [University of Connecticut, Connecticut Global Fuel Cell Center Department of Electrical and Computer Engineering, 44 Weaver Road, Unit 5233, Storrs, CT 06269-5233 (United States)

2010-02-15

A single PEMFC has been operated by varying the assembly temperature, the air dew point temperature and the anode/cathode stoichiometry rates with the aim to identify the parameters and combinations of factors affecting the cell performance. Some of the experiments were conducted with low humidified reactants (relative humidity of 12%). The FC characterizations tests have been conducted using in situ electrochemical methods based on load current and cell voltage signal analysis, namely: polarization curves, EIS measurements, cyclic and linear sweep voltammetries (CV and LSV). The impacts of the parameters on the global FC performances were observed using the polarization curves whereas EIS, CV and LSV test results were used to discriminate the different voltage loss sources. The test results suggest that some parameter sets allow maximal output voltages but can also induce material degradation. For instance, higher FC temperature and air flow values can induce significant electrical efficiency benefits, notably by increasing the reversible potential and the reaction kinetics. However, raising the cell temperature can also gradually dry the FC and increase the risk of membrane failure. LSV has also shown that elevated FC temperature and relative humidity can also accelerate the electrolyte degradation (i.e. slightly higher fuel crossover rate) and reduce the lifetime consequently. (author)

Study of temperature, air dew point temperature and reactant flow effects on proton exchange membrane fuel cell performances using electrochemical spectroscopy and voltammetry techniques

Science.gov (United States)

Wasterlain, S.; Candusso, D.; Hissel, D.; Harel, F.; Bergman, P.; Menard, P.; Anwar, M.

A single PEMFC has been operated by varying the assembly temperature, the air dew point temperature and the anode/cathode stoichiometry rates with the aim to identify the parameters and combinations of factors affecting the cell performance. Some of the experiments were conducted with low humidified reactants (relative humidity of 12%). The FC characterizations tests have been conducted using in situ electrochemical methods based on load current and cell voltage signal analysis, namely: polarization curves, EIS measurements, cyclic and linear sweep voltammetries (CV and LSV). The impacts of the parameters on the global FC performances were observed using the polarization curves whereas EIS, CV and LSV test results were used to discriminate the different voltage loss sources. The test results suggest that some parameter sets allow maximal output voltages but can also induce material degradation. For instance, higher FC temperature and air flow values can induce significant electrical efficiency benefits, notably by increasing the reversible potential and the reaction kinetics. However, raising the cell temperature can also gradually dry the FC and increase the risk of membrane failure. LSV has also shown that elevated FC temperature and relative humidity can also accelerate the electrolyte degradation (i.e. slightly higher fuel crossover rate) and reduce the lifetime consequently.

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection.

Science.gov (United States)

Xu, Ren-Xia; Yu, Xin-Yao; Gao, Chao; Jiang, Yu-Jing; Han, Dong-Dong; Liu, Jin-Huai; Huang, Xing-Jiu

2013-08-06

Nanostructured magnesium silicate hollow spheres, one kind of non-conductive nanomaterials, were used in heavy metal ions (HMIs) detection with enhanced performance for the first time. The detailed study of the enhancing electrochemical response in stripping voltammetry for simultaneous detection of ultratrace Cd(2+), Pb(2+), Cu(2+) and Hg(2+) was described. Electrochemical properties of modified electrodes were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The operational parameters which have influence on the deposition and stripping of metal ions, such as supporting electrolytes, pH value, and deposition time were carefully studied. The anodic stripping voltammetric performance toward HMIs was evaluated using square wave anodic stripping voltammetry (SWASV) analysis. The detection limits achieved (0.186nM, 0.247nM, 0.169nM and 0.375nM for Cd(2+), Pb(2+), Cu(2+) and Hg(2+)) are much lower than the guideline values in drinking water given by the World Health Organization (WHO). In addition, the interference and stability of the modified electrode were also investigated under the optimized conditions. An interesting phenomenon of mutual interference between different metal ions was observed. Most importantly, the sensitivity of Pb(2+) increased in the presence of certain concentrations of other metal ions, such as Cd(2+), Cu(2+) and Hg(2+) both individually and simultaneously. The proposed electrochemical sensing method is thus expected to open new opportunities to broaden the use of SWASV in analysis for detecting HMIs in the environment. Copyright © 2013 Elsevier B.V. All rights reserved.

Double elimination voltammetry of short oligonucleotides

Czech Academy of Sciences Publication Activity Database

Mikelová, R.; Trnková, L.; Jelen, František

2007-01-01

Roč. 19, č. 17 (2007), s. 1807-1814 ISSN 1040-0397 R&D Projects: GA AV ČR(CZ) IAA100040602 Institutional research plan: CEZ:AV0Z50040507; CEZ:AV0Z50040702 Keywords : adsorptive stripping voltammetry * elimination voltammetry * oligodeoxynucleotide Subject RIV: BO - Biophysics Impact factor: 2.949, year: 2007

The Limbic-Prefrontal Network Modulated by Electroacupuncture at CV4 and CV12

Directory of Open Access Journals (Sweden)

Jiliang Fang

2012-01-01

Full Text Available fMRI studies showed that acupuncture could induce hemodynamic changes in brain networks. Many of these studies focused on whether specific acupoints could activate specific brain regions and were often limited to manual acupuncture at acupoints on the limbs. In this fMRI study, we investigated acupuncture's modulation effects on brain functional networks by electroacupuncture (EA at acupoints on the midline of abdomen. Acupoints Guanyuan (CV4 and Zhongwan (CV12 were stimulated in 21 healthy volunteers. The needling sensations, brain activation, and functional connectivity were studied. We found that the limbic-prefrontal functional network was deactivated by EA at CV4 and CV12. More importantly, the local functional connectivity was significantly changed during EA stimulation, and the change persisted during the period after the stimulation. Although minor differences existed, both acupoints similarly modulated the limbic-prefrontal functional network, which is overlapped with the functional circuits associated with emotional and cognitive regulation.

A novel framework for intelligent signal detection via artificial neural networks for cyclic voltammetry in pyroprocessing technology

International Nuclear Information System (INIS)

Rakhshan Pouri, Samaneh; Manic, Milos; Phongikaroon, Supathorn

2018-01-01

Highlights: •First time ANN implementation toward pyroprocessing safeguards. •Real time monitoring in terms of intelligent materials detection and accountability. •CV simulation via ANN showing a high accuracy of prediction for the unseen situation. •Elimination of trial and error approach to avoid overfitting in learning. -- Abstract: Electrorefiner (ER) is the heart of pyroprocessing technology which contains different fission, rare-earth, and transuranic chloride compositions during the operation. This is still a developing technology that needs to be advanced for the commercial reprocessing design of used nuclear fuel (UNF) in terms of intelligent materials detection and accountability towards safeguards. A novel signal detection, artificial neural network (ANN), has been proposed in this study to apply on massive ER systemic parameters to simulate cyclic voltammetry (CV) graphs for the unseen situation. ANN could be trained to mimic the system by driving the data sets interrelation between variables to provide current and potential simulated data sets with a high accuracy of prediction. For this purpose, over 230,000 experimental data points reported in literature have been explored—0.5–5 wt% of zirconium chloride (ZrCl 4 ) in LiCl-KCl molten salt with different scan rates at 773 K. This study has illustrated a new framework of ANN implementation to eliminate trial and error approach by comparing the average error of one to three hidden layers with different number of neurons. In addition, this framework results in finding a preferable balance between underfitting and overfitting in deep learning. Furthermore, simulated CV graphs were compared with the experimental data and illustrated a reasonable prediction. The results reveal two structures with three hidden layers providing a good prediction with a low average error. The outcomes indicate that ANN has a strong potential in applying toward safeguards for pyroprocessing technology.

Electrochemical impedance spectroscopy versus cyclic voltammetry for the electroanalytical sensing of capsaicin utilising screen printed carbon nanotube electrodes.

Science.gov (United States)

Randviir, Edward P; Metters, Jonathan P; Stainton, John; Banks, Craig E

2013-05-21

Screen printed carbon nanotube electrodes (SPEs) are explored as electroanalytical sensing platforms for the detection of capsaicin in both synthetic capsaicin solutions and capsaicin extracted from chillies and chilli sauces utilising both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). It is found that the technique which is most applicable to the electroanalytical detection of capsaicin depends upon the analyte concentration: for the case of low capsaicin concentrations, CV is a more appropriate method as capsaicin exhibits characteristic voltammetric waves of peak heights relevant to the capsaicin concentration; but for the case of high capsaicin concentrations where the voltammetric waves merge and migrate out of the potential window, EIS is shown to be a more appropriate technique, owing to the observed linear increases in R(ct) with increasing concentration. Furthermore, we explore different types of screen printed carbon nanotube electrodes, namely single- and multi- walled carbon nanotubes, finding that they are technique-specific: for the case of low capsaicin concentrations, single-walled carbon nanotube SPEs are preferable (SW-SPE); yet for the case of EIS at high capsaicin concentrations, multi-walled carbon nanotube SPEs (MW-SPE) are preferred, based upon analytical responses. The analytical performance of CV and EIS is applied to the sensing of capsaicin in grown chillies and chilli sauces and is critically compared to 'gold standard' HPLC analysis.

INTERSTOCK EFFECT ON THE GROWTH OF MANDARIN CV BATU 55, TANGERINE CV PONTIANAK AND LIME CV NIMAS PROPAGATED BY GRAFTING

Directory of Open Access Journals (Sweden)

Sugiyatno A.

2017-10-01

Full Text Available Japansche citroen (JC rootstock is still the main choice for producing citrus seeds for its high availability and compatibility. Other rootstocks have been used in the production, yet they produce unsatisfying results. Based on the theory, there is an alternative to use rootstock as interstock in order to stimulate the growth of scion. The objective of this reseach is to understand the effect of interstock on the growth of Mandarin cv. Batu 55, Tangerine cv. Pontianak and Lime cv. Nimas. This research was conducted in the screen house of Tlekung Experimental Field of Indonesian Citrus and Subtropical Fruits Research Institute (ICSFRI in Batu-East Java, located on 950 m asl, from January to April 2016. This research was arranged in a CRD design with 4 replications and 24 interstock-scion combination treatments. The interstocks used in this study were Carizzo citrange, Citrumello, Poncirus trifoliata, Volkameriana, Rough lemon, Troyer citrange, Kanci and control (JC combined with 3 scions namely Mandarin cv. Batu 55, Tangerine cv. Pontianak and Lime cv. Nimas propagated by grafting. The result showed the percentage of successful grafting ranged between 37.5% to 100%, while the percentage of the shoot formed on grafted plants was 75%-100%. The use of Poncirus trifoliata as interstock has stimulated fastest bud break on Tangerine cv. Pontianak in just 24.75 days while the Troyer citrange has stimulated better shoot growth in Lime cv. Nimas, resulted to the highest shoot around 52.20 cm which was significantly different from other treatments. Meanwhile, Carizzo citrange has been found to have some influences to the plant diameter and the number of leave of Lime cv. Nimas but showed insignificant effect on the growth of its own diameter. The use of interstock showed that it can be used to promote the growth of scion which usually has slow growth when it is directly grafted on the rootstock.

Thin-film voltammetry and its analytical applications: A review

International Nuclear Information System (INIS)

Tian, Huihui; Li, Yunchao; Shao, Huibo; Yu, Hua-Zhong

2015-01-01

Highlights: • Electrochemistry at immiscible liquid–liquid interfaces is fundamentally important. • Methods for studying redox processes at liquid–liquid interfaces are reviewed. • Thin-film voltammetry is simple in experimental operation and kinetic data analysis. • Thin-film voltammetry’s analytical applications are prevailing and comprehensive. - Abstract: Electrochemical reactions at the interfaces of immiscible electrolyte solutions (ITIES) are of fundamental importance in the fields of chemical, biological and pharmaceutical sciences. Four-electrode cell setup, scanning electrochemical microscopy (SECM) and thin-film voltammetry are the three most frequently used methods for studying the electrochemical processes at these interfaces. The principle, experimental design, advantages and challenges of the three methods are described and compared. The thin-film voltammetry is highlighted for its simplicity in experimental operation and kinetic data analysis. Its versatile analytical applications are discussed in detail, including the study of redox properties of hydrophobic compounds, evaluation of interfacial electron transfer kinetics, synthesis of nanoparticles/nanostructures, and illustration of cross-membrane ion transport phenomena

Cyclic voltammetry response of an undoped CVD diamond electrodes

Energy Technology Data Exchange (ETDEWEB)

Fabisiak, K., E-mail: kfab@ukw.edu.pl [Institute of Physics, Kazimierz Wielki University, Powstancow Wielkopolskich 2, 85-090 Bydgoszcz (Poland); Torz-Piotrowska, R. [Faculty of Chemical Technology and Engineering, UTLS Seminaryjna 3, 85-326 Bydgoszcz (Poland); Staryga, E. [Institute of Physics, Technical University of Lodz, Wolczanska 219, 90-924 Lodz (Poland); Szybowicz, M. [Faculty of Technical Physics, Poznan University of Technology, Nieszawska 13A, 60-965 Poznan (Poland); Paprocki, K.; Popielarski, P.; Bylicki, F. [Institute of Physics, Kazimierz Wielki University, Powstancow Wielkopolskich 2, 85-090 Bydgoszcz (Poland); Wrzyszczynski, A. [Institute of Physics, Technical University of Lodz, Wolczanska 219, 90-924 Lodz (Poland)

2012-09-01

Highlights: Black-Right-Pointing-Pointer Correlation was found between diamond quality and its electrochemical performance. Black-Right-Pointing-Pointer The electrode sensitivity depends on the content of sp{sup 2} carbon phase in diamond layer. Black-Right-Pointing-Pointer The sp{sup 2} carbon phase content has little influence on the CV peak separation ({Delta}E{sub p}). - Abstract: The polycrystalline undoped diamond layers were deposited on tungsten wire substrates by using hot filament chemical vapor deposition (HFCVD) technique. As a working gas the mixture of methanol in excess of hydrogen was used. The morphologies and quality of as-deposited films were monitored by means of scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy respectively. The electrochemical activity of the obtained diamond layers was monitored by using cyclic voltammetry measurements. Analysis of the ferrocyanide-ferricyanide couple at undoped diamond electrode suggests that electrochemical reaction at diamond electrode has a quasireversibile character. The ratio of the anodic and cathodic peak currents was always close to unity. In this work we showed that the amorphous carbon admixture in the CVD diamond layer has a crucial influence on its electrochemical performance.

Probing the electrochemical properties of TiO{sub 2}/graphene composite by cyclic voltammetry and impedance spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Yadav, Pankaj [Department of Physics, Marwadi Education Foundation, Rajkot 360003 (India); Pandey, Kavita; Bhatt, Parth [School of Solar Energy, Pandit Deendayal Petroleum University, Gandhinagar 382007 (India); Tripathi, Brijesh, E-mail: brijesh.tripathi@sse.pdpu.ac.in [School of Technology, Pandit Deendayal Petroleum University, Gandhinagar 382007 (India); Pandey, Manoj Kumar; Kumar, Manoj [School of Technology, Pandit Deendayal Petroleum University, Gandhinagar 382007 (India)

2016-04-15

Highlights: • Role of TiO{sub 2}/graphene composite in charge transport within supercapacitors. • DC and AC characterization to investigate voltage dependence of charge transport. • Physical insight into the electrochemistry of electrode–electrolyte interface. - Abstract: This work describes the role of graphene in charge transport and diffusion mechanism at TiO{sub 2}/graphene electrode–electrolyte interface. To explore the mechanism, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used. The CV results depict that TiO{sub 2} and TiO{sub 2}/graphene electrodes behave differently in terms of charge transport and ion adsorption under the steady state conditions. The performance of TiO{sub 2} electrode–electrolyte interface is mainly limited by the charge transport and pseudo-capacitive effects while the response of TiO{sub 2}/graphene electrode–electrolyte interface is mainly dominated by the double layer capacitive effects. The EIS measurement leads to the direct determination of broad range of parameters, i.e. series resistance, charge transport, rate capability and ion diffusion. The experimental results and their analysis will have a significant impact on understanding the role of graphene in the electrochemical response of an electrode–electrolyte interface.

Electrochemical dissolution of chalcopyrite studied by voltammetry of immobilized microparticles

Czech Academy of Sciences Publication Activity Database

Pikna, L.; Lux, L.; Grygar, Tomáš

2006-01-01

Roč. 60, č. 4 (2006), s. 293-296 ISSN 0366-6352 Grant - others:VEGA(SK) No1/1108/04; APVT(SK) No20-009404 Institutional research plan: CEZ:AV0Z40320502 Keywords : chalcopyrite * cyclic voltammetry Subject RIV: CA - Inorganic Chemistry Impact factor: 0.360, year: 2006

Cyclic voltammetry, square wave voltammetry, electrochemical impedance spectroscopy and colorimetric method for hydrogen peroxide detection based on chitosan/silver nanocomposite

Directory of Open Access Journals (Sweden)

Hoang V. Tran

2018-05-01

Full Text Available In this paper, we demonstrate a promising method to fabricate a non-enzymatic stable, highly sensitive and selective hydrogen peroxide sensor based on a chitosan/silver nanoparticles (CS/AgNPs hybrid. Using this composite, we elaborated both electrochemical and colorimetric sensors for hydrogen peroxide detection. The colorimetric sensor is based on a homogenous reaction which fades the color of CS/AgNPs solutions from red-orange to colorless depending on hydrogen peroxide concentration. For the electrochemical sensor, CS/AgNPs were immobilized on glassy carbon electrodes and hydrogen peroxide was measured using cyclic voltammetry, square wave voltammetry and electrochemical impedance spectroscopy. The response time is less than 10 s and the detection limit is 5 μM. Keywords: Spectrophotometric detection, Electrochemical impedance spectroscopy, Square wave voltammetry, Cyclic voltammetry, Chitosan/silver nanoparticles (CS/AgNPs hybrid, Hydrogen peroxide

Digital simulation of anodic stripping voltammetry from thin film electrodes

International Nuclear Information System (INIS)

Magallanes, J.F.

1984-01-01

The anodic stripping voltammetry (ASV) is routinely applied to control of Cu(II) in heavy water in the primary cooling loop of the Nuclear Power Reactor. The anodic stripping voltammetry (ASV) is a very well-known technique in electroanalytical chemistry. However, due to the complexity of the phenomena, it is practised with the fundamentals of empiric considerations. A geometric model for the anodic stripping voltammetry (ASV) from thin film electrodes which can be calculated by explicit digital simulation method is proposed as a possibility of solving the electrochemically reversible, cuasi-reversible and irreversible reactions under linear potential scan and multiple potential scans. (Until now the analytical mathematical method was applied to reversible reactions). All the results are compared with analytical solutions and experimental results and it permits to conclude that the anodic stripping voltammetry (ASV) can be studied with the simplicity and potentialities of explicit digital simulation methods. (M.E.L.) [es

Applications of voltammetry in environmental science

Energy Technology Data Exchange (ETDEWEB)

Richardson, D.H.S.

1985-01-01

The wide-ranging applications of voltammetry to the analysis of trace metals and other ions of interest to environmental scientists are reviewed. It is concluded that the availability of modern microprocessor controlled instrumentation, capable of performing both anodic stripping and square wave voltammetry, provides a flexible and powerful technique to aid in solving analytical problems and carrying out routine analyses. The recent identification of many sensitizing agents which reduce detection limits to part per thousand million level, or below, is a further exciting development in this field.

Effect of Sodium Cyanide on Wheat (Triticum durum cv. Altar and T. aestivum cv. Cumhuriyet)

DEFF Research Database (Denmark)

Gemici, Meliha; Karshenass, A.M.; Tan, Kit

2008-01-01

The effect of sodium cyanide on the morphology of stem, leaves and grain yields of Triticum durum cv. Altar and Triticum aestivum cv. Cumhuriyet grown under glass was studied. Seeds were planted in six different sets of pots containing ordinary garden soil. After formation of the first leaves......, the first set was used as the control and watered using ordinary bottled water sold commercially. The other five sets with T. durum cv. Altar and T. aestivum cv. Cumhuriyet seedlings were additionally watered with various concentrations of sodium cyanide, the test-quantity used being 10-50 mg/L. Growth...... of individual plants was monitored until grain production. It was found that the sodium cyanide concentrations in the feed solutions affected plant stature, with the plants becoming progressively dwarfed with increasing dosage. Anomalies in the morphological and anatomical structure of the plant were also noted...

Cyclic voltammetry on sputter-deposited films of electrochromic Ni oxide: Power-law decay of the charge density exchange

Energy Technology Data Exchange (ETDEWEB)

Wen, Rui-Tao, E-mail: Ruitao.Wen@angstrom.uu.se; Granqvist, Claes G.; Niklasson, Gunnar A. [Department of Engineering Sciences, The A°ngström Laboratory, Uppsala University, P. O. Box 534, SE-75121 Uppsala (Sweden)

2014-10-20

Ni-oxide-based thin films were produced by reactive direct-current magnetron sputtering and were characterized by X-ray diffraction and Rutherford backscattering spectroscopy. Intercalation of Li{sup +} ions was accomplished by cyclic voltammetry (CV) in an electrolyte of LiClO{sub 4} in propylene carbonate, and electrochromism was documented by spectrophotometry. The charge density exchange, and hence the optical modulation span, decayed gradually upon repeated cycling. This phenomenon was accurately described by an empirical power law, which was valid for at least 10{sup 4} cycles when the applied voltage was limited to 4.1 V vs Li/Li{sup +}. Our results allow lifetime assessments for one of the essential components in an electrochromic device such as a “smart window” for energy-efficient buildings.

IJ-OpenCV: Combining ImageJ and OpenCV for processing images in biomedicine.

Science.gov (United States)

Domínguez, César; Heras, Jónathan; Pascual, Vico

2017-05-01

The effective processing of biomedical images usually requires the interoperability of diverse software tools that have different aims but are complementary. The goal of this work is to develop a bridge to connect two of those tools: ImageJ, a program for image analysis in life sciences, and OpenCV, a computer vision and machine learning library. Based on a thorough analysis of ImageJ and OpenCV, we detected the features of these systems that could be enhanced, and developed a library to combine both tools, taking advantage of the strengths of each system. The library was implemented on top of the SciJava converter framework. We also provide a methodology to use this library. We have developed the publicly available library IJ-OpenCV that can be employed to create applications combining features from both ImageJ and OpenCV. From the perspective of ImageJ developers, they can use IJ-OpenCV to easily create plugins that use any functionality provided by the OpenCV library and explore different alternatives. From the perspective of OpenCV developers, this library provides a link to the ImageJ graphical user interface and all its features to handle regions of interest. The IJ-OpenCV library bridges the gap between ImageJ and OpenCV, allowing the connection and the cooperation of these two systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Supercapacitive evaluation of carbon black/exfoliated graphite/MnO{sub 2} ternary nanocomposite electrode by continuous cyclic voltammetry

Energy Technology Data Exchange (ETDEWEB)

Naderi, Hamid Reza, E-mail: hrnaderi@ut.ac.ir [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Norouzi, Parviz, E-mail: norouzi@khayam.ut.ac.ir [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Biosensor Research Center, Endocrinology & Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Ganjali, Mohammad Reza, E-mail: ganjali@khayam.ut.ac.ir [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Biosensor Research Center, Endocrinology & Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of)

2015-08-01

A new ternary nanocomposite was prepared by using MnO{sub 2}, carbon black (CB), and exfoliated graphite (EG) through a sonochemical method. In this process, the MnO{sub 2} nanoparticles was anchored on the mixture of CB and EG to maximize the specific capacitances of these materials. Structure and morphology of the CB/EG/MnO{sub 2} nanocomposites were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electrochemical properties of the CB/EG/MnO{sub 2} nanocomposites with different content of MnO{sub 2} were studied by cyclic voltammetry (CV), fast Fourier transformation continuous cyclic voltammetry (FFTCCV) technique, galvanostatic charge–discharge, and electrochemical impedance spectroscopy (EIS). The best nanocomposite electrode displayed specific capacitance of 364 F g{sup −1} at the scan rate of 2 mV s{sup −1} in 0.5 M Na{sub 2}SO{sub 4} aqueous solution, which is higher than pure MnO{sub 2} (289 F g{sup −1}). The capacitance stability of the nanocomposite electrode was studied by FFTCCV at the scan rate of 500 mV s{sup −1}. The result shows that after recording 4000 CVs, the specific capacitance of the nanocomposite decline only 5%. Furthermore, the nanocomposite electrode showed higher energy density than MnO{sub 2} electrode. - Highlights: • MnO{sub 2}/exfoliated graphite/Carbon black nanocomposites were synthesized by ultrasonic vibration. • The best nanocomposite electrode exhibits specific capacitance of 364 F g{sup −1} in 2 mV s{sup −1}. • The stability of the nanocomposite electrode was study FFTCCV technique. • The capacitance decreases only 5.2% of initial capacitance after 4000 cycles.

A Practical Beginner's Guide to Cyclic Voltammetry

Science.gov (United States)

Elgrishi, Noémie; Rountree, Kelley J.; McCarthy, Brian D.; Rountree, Eric S.; Eisenhart, Thomas T.; Dempsey, Jillian L.

2018-01-01

Despite the growing popularity of cyclic voltammetry, many students do not receive formalized training in this technique as part of their coursework. Confronted with self-instruction, students can be left wondering where to start. Here, a short introduction to cyclic voltammetry is provided to help the reader with data acquisition and…

Arsenic speciation study using x ray fluorescence and cathodic stripping voltammetry

International Nuclear Information System (INIS)

Valcarcel, Lino; Montero, Alfredo; Estevez, Juan; Pupo, Ivan

2006-01-01

Two methods for the determination of total As concentration and its inorganic species by Energy Dispersive X Ray Fluorescence (EDXRF) and Cathodic Stripping Voltammetry (CSV) were developed. The effect of pH on As (III) recovery after precipitation with APDC and EDXRF measurement was studied. Quantification of As was done using the thin layer approach. A reduction of As(V) to As(III) with sodium thiosulphate was necessary in order to determine the total As concentration. The effect of the amount of reducing agent on the recovery was also studied. As(V) concentration was calculated by difference between total As and As(III) concentration. On the other hand, a polarographic method, using the cathodic stripping mode was implemented. As(III) deposition on the electrode was enhanced by addition of Se(IV). Factors affecting As determination (selenium concentration, deposition potential, deposition time) were studied

Stripping voltammetry in environmental and food analysis.

Science.gov (United States)

Brainina, K Z; Malakhova, N A; Stojko, N Y

2000-10-01

The review covers over 230 papers published mostly in the last 5 years. The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs. The sensors employed are impregnated graphite, carbon paste, thick film carbon/graphite and thin film metallic electrodes modified in-situ or beforehand. Hanging mercury drop electrodes and mercury coated glassy carbon electrodes are also mentioned. Strip and long-lived sensors for portable instruments and flow through systems are discussed as devices for future development and application of stripping voltammetry.

Characterization of carbon nanotubes decorated with NiFe2O4 magnetic nanoparticles as a novel electrochemical sensor: Application for highly selective determination of sotalol using voltammetry

International Nuclear Information System (INIS)

Ensafi, Ali A.; Allafchian, Ali R.; Rezaei, B.; Mohammadzadeh, R.

2013-01-01

A magnetic nano‐composite of multiwall carbon nanotube, decorated with NiFe 2 O 4 nanoparticles, was synthesized with citrate sol–gel method. The multiwall carbon nanotubes decorated with NiFe 2 O 4 nanoparticles (NiFe 2 O 4 –MWCNTs) were characterized with different methods such as Fourier transform infrared spectroscopy (FT‐IR), transmission electron microscopy (TEM), atomic force microscopy (AFM), vibrating sample magnetometer (VSM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The new nano-composite acts as a suitable electrocatalyst for the oxidation of sotalol at a potential of 500 mV at the surface of the modified electrode. Linear sweep voltammetry exhibited two wide linear dynamic ranges of 0.5–1000 μmol L −1 sotalol with a detection limit of 0.09 μmol L −1 . The modified electrode was used as a novel electrochemical sensor for the determination of sotalol in real samples such as pharmaceutical, patient and safe human urine. - Graphical abstract: Multiwall carbon nanotube, decorated with NiFe 2 O 4 nanoparticles, was prepared using citrate sol–gel method. We characterized the new nanoparticles with different spectroscopic and voltammetric methods. The nano sensor was used as a voltammetric sensor for the determination of trace amounts of sotalol at pH 7.0. Highlights: ► We synthesized and prepared new sensor, multiwall carbon nanotubes decorated with NiFe 2 O 4 . ► Several spectroscopic and voltammetric methods were used to study its characteristics. ► The nanoparticles act as suitable electrocatalyst for the oxidation of sotalol. ► Sotalol could be measured as low as 0.09 μmol L −1 using linear sweep voltammetry.

Cyclic voltammetry and RBS study of paint components

International Nuclear Information System (INIS)

Bowman, Lynn; Spencer, Dirk; Muntele, Claudiu; Muntele, Iulia; Ila, D.

2007-01-01

Heavy metals and metalloid ions are found in environmental matrices. The most toxic are lead, cadmium and mercury. These three heavy metals have no biological function and are toxic at all concentrations. Lead is one of the most insidious heavy metals and is introduced into the environment by many different means. It persists in both urban and rural settings, being found in paint chips, pottery, crystal and pharmaceutical and nutritional products. The analysis of heavy elements such as lead in soil is of particular importance [W.T. Sturges, R.M. Harrison, Sci. Total Environ. 44 (3) (1985) 225; M.L. Lepow, L. Bruckman, M. Gillette, S. Markowitz, R. Robino, J. Kapish, Environ. Res. 10 (3) (1975) 415; A.E. Daniels, J.R. Kominsky, P.J. Clark, J. Hazard. Mater. B 87 (2001) 117; G. Hutter, D. Moshman, J. Hazard. Mater. 40 (1995) 1]. In preparing the methods for lead detection in paint, we have used Rutherford backscattering spectrometry (RBS) in order to study the type and amount of heavy metal content in paint samples collected at various sites in the historic campus at A and M University (AAMU). We will show the results of our study with emphasis on comparison of what we learned about presence of lead in paints using our ion beam methods compared with the analysis of lead in paints using cyclic voltammetry

Emgu CV essentials

CERN Document Server

Shi, Shin

2013-01-01

This book provides a practical guide to Emgu CV libraries, with sample code and examples used throughout to explain the concepts clearly. Each chapter deals with a different aspect of the Computer Vision field and the implementation of that topic in Emgu CV.If you are a C# programmer working on computer vision projects, this book is for you. You should have prior experience with C#.

Cyclic voltammetry and scanning electrochemical microscopy studies of methylene blue immobilized on the self-assembled monolayer of n-dodecanethiol

International Nuclear Information System (INIS)

Salamifar, Seyed Ehsan; Mehrgardi, Masoud Ayatollahi; Kazemi, Sayed Habib; Mousavi, Mir Fazllollah

2010-01-01

Electron transfer (ET) kinetics through n-dodecanethiol (C 12 SH) self-assembled monolayer on gold electrode was studied using cyclic voltammetry (CV), scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS). An SECM model for compensating pinhole contribution, was used to measure the ET kinetics of solution-phase probes of ferrocyanide/ferricyanide (Fe(CN) 6 4-/3- ) and ferrocenemethanol/ferrociniummethanol (FMC 0/+ ) through the C 12 SH monolayer yielding standard tunneling rate constant (k ET 0 ) of (4 ± 1) x 10 -11 and (3 ± 1) x 10 -10 cm s -1 for Fe(CN) 6 4-/3- and FMC 0/+ respectively. Decay tunneling constants (β) of 0.97 and 0.96 A -1 for saturated alkane thiol chains were obtained using Fe(CN) 6 4- and FMC respectively. Also, it was found that methylene blue (MB) molecules are effectively immobilized on the C 12 SH monolayer and can mediate the ET between the solution-phase probes and underlying gold substrate. SECM-mediated model was used to simultaneously measure the bimolecular ET between the solution-phase probes and the monolayer-immobilized MB molecules, as well as tunneling ET between the monolayer-immobilized MB molecules and the underlying gold electrode, allowing the measurement of k BI = (5 ± 1) x 10 6 and (4 ± 2) x 10 7 cm 3 mol -1 s -1 for the bimolecular ET and k ET/MB 0 =(1±0.3)x10 -3 and (7 ± 3) x 10 -2 s -1 for the standard tunneling rate constant of ET using Fe(CN) 6 4-/3- and FMC 0/+ probes respectively.

Feasibility Study for the Reduction of Perchlorate, Iodide, and Other Aqueous Anions

National Research Council Canada - National Science Library

Clewell, Rebecca A; Tsui, David T; Mattie, David R

1999-01-01

Cyclic Voltammetry (CV) was used as a technique to determine the feasibility of the use of a coulometric detector in the determination of perchlorate, iodide, and various other anions commonly found in drinking water...

Learning openCV computer vision with the openCV library

CERN Document Server

Bradski, Gary

2008-01-01

Learning OpenCV puts you right in the middle of the rapidly expanding field of computer vision. Written by the creators of OpenCV, the widely used free open-source library, this book introduces you to computer vision and demonstrates how you can quickly build applications that enable computers to see" and make decisions based on the data. With this book, any developer or hobbyist can get up and running with the framework quickly, whether it's to build simple or sophisticated vision applications

Studies of frequency dependent C-V characteristics of neutron irradiated p+-n silicon detectors

International Nuclear Information System (INIS)

Li, Zheng; Kraner, H.W.

1990-10-01

Frequency-dependent capacitance-voltage fluence (C-V) characteristics of neutron irradiated high resistivity silicon p + -n detectors have been observed up to a fluence of 8.0 x 10 12 n/cm 2 . It has been found that frequency dependence of the deviation of the C-V characteristic (from its normal V -1/2 dependence), is strongly dependent on the ratio of the defect density and the effective doping density N t /N' d . As the defect density approaches the effective dopant density, or N t /N' d → 1, the junction capacitance eventually assumes the value of the detector geometry capacitance at high frequencies (f ≤ 10 5 Hz), independent of voltage. A two-trap-level model using the concept of quasi-fermi levels has been developed, which predicts both the effects of C-V frequency dependence and dopant compensation observed in this study

A one-dimensional stochastic approach to the study of cyclic voltammetry with adsorption effects

Energy Technology Data Exchange (ETDEWEB)

Samin, Adib J. [The Department of Mechanical and Aerospace Engineering, The Ohio State University, 201 W 19" t" h Avenue, Columbus, Ohio 43210 (United States)

2016-05-15

In this study, a one-dimensional stochastic model based on the random walk approach is used to simulate cyclic voltammetry. The model takes into account mass transport, kinetics of the redox reactions, adsorption effects and changes in the morphology of the electrode. The model is shown to display the expected behavior. Furthermore, the model shows consistent qualitative agreement with a finite difference solution. This approach allows for an understanding of phenomena on a microscopic level and may be useful for analyzing qualitative features observed in experimentally recorded signals.

A one-dimensional stochastic approach to the study of cyclic voltammetry with adsorption effects

International Nuclear Information System (INIS)

Samin, Adib J.

2016-01-01

In this study, a one-dimensional stochastic model based on the random walk approach is used to simulate cyclic voltammetry. The model takes into account mass transport, kinetics of the redox reactions, adsorption effects and changes in the morphology of the electrode. The model is shown to display the expected behavior. Furthermore, the model shows consistent qualitative agreement with a finite difference solution. This approach allows for an understanding of phenomena on a microscopic level and may be useful for analyzing qualitative features observed in experimentally recorded signals.

Ultramicroelectrode voltammetry and scanning electrochemical microscopy in room-temperature ionic liquid electrolytes.

Science.gov (United States)

Walsh, Darren A; Lovelock, Kevin R J; Licence, Peter

2010-11-01

The high viscosity and unusual properties of room temperature ionic liquids (RTILs) present a number of challenges when performing steady-state voltammetry and scanning electrochemical microscopy in RTILs. These include difficulties in recording steady-state currents at ultramicroelectrode surfaces due to low diffusion coefficients of redox species and problems associated with unequal diffusion coefficients of oxidised and reduced species in RTILs. In this tutorial review, we highlight the recent progress in the use of RTILs as electrolytes for ultramicroelectrode voltammetry and SECM. We describe the basic principles of ultramicroelectrode voltammetry and SECM and, using examples from the recent literature, we discuss the conditions that must be met to perform steady-state voltammetry and SECM measurements in RTILs. Finally, we briefly discuss the electrochemical insights that can be obtained from such measurements.

Electrocatalytic Oxidation of Hydroxylamine at a Quinizarine Modified Glassy Carbon Electrode: Application to Differential Pulse Voltammetry Detection of Hydroxylamine

OpenAIRE

MAZLOUMARDAKANI, Mohammad; KARAMI, Payam EBRAHIMI

2014-01-01

The electrocatalytic behavior of hydroxylamine was studied on a glassy carbon electrode modified by electrodeposition of quinizarine, using cyclic voltammetry, chronoamperometry, and rotating disk voltammetry as diagnostic techniques. Cyclic voltammetry showed that the catalytic current of the system depends on the concentration of hydroxylamine. The magnitude of the peak current for quinizarine increased sharply in the presence of hydroxylamine and proportional to hydroxylamine conc...

Cyclic voltammetry and scanning electrochemical microscopy studies of methylene blue immobilized on the self-assembled monolayer of n-dodecanethiol

Energy Technology Data Exchange (ETDEWEB)

Salamifar, Seyed Ehsan [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of); Mehrgardi, Masoud Ayatollahi [Department of Chemistry, University of Isfahan, Isfahan (Iran, Islamic Republic of); Kazemi, Sayed Habib [Department of Chemistry, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan (Iran, Islamic Republic of); Mousavi, Mir Fazllollah, E-mail: mousavim@modares.ac.i [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of)

2010-12-30

Electron transfer (ET) kinetics through n-dodecanethiol (C{sub 12}SH) self-assembled monolayer on gold electrode was studied using cyclic voltammetry (CV), scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS). An SECM model for compensating pinhole contribution, was used to measure the ET kinetics of solution-phase probes of ferrocyanide/ferricyanide (Fe(CN){sub 6}{sup 4-/3-}) and ferrocenemethanol/ferrociniummethanol (FMC{sup 0/+}) through the C{sub 12}SH monolayer yielding standard tunneling rate constant (k{sub ET}{sup 0}) of (4 {+-} 1) x 10{sup -11} and (3 {+-} 1) x 10{sup -10} cm s{sup -1} for Fe(CN){sub 6}{sup 4-/3-} and FMC{sup 0/+} respectively. Decay tunneling constants ({beta}) of 0.97 and 0.96 A{sup -1} for saturated alkane thiol chains were obtained using Fe(CN){sub 6}{sup 4-} and FMC respectively. Also, it was found that methylene blue (MB) molecules are effectively immobilized on the C{sub 12}SH monolayer and can mediate the ET between the solution-phase probes and underlying gold substrate. SECM-mediated model was used to simultaneously measure the bimolecular ET between the solution-phase probes and the monolayer-immobilized MB molecules, as well as tunneling ET between the monolayer-immobilized MB molecules and the underlying gold electrode, allowing the measurement of k{sub BI} = (5 {+-} 1) x 10{sup 6} and (4 {+-} 2) x 10{sup 7} cm{sup 3} mol{sup -1} s{sup -1} for the bimolecular ET and k{sub ET/MB}{sup 0}=(1{+-}0.3)x10{sup -3} and (7 {+-} 3) x 10{sup -2} s{sup -1} for the standard tunneling rate constant of ET using Fe(CN){sub 6}{sup 4-/3-} and FMC{sup 0/+} probes respectively.

Small-angle neutron scattering and cyclic voltammetry study on electrochemically oxidized and reduced pyrolytic carbon

International Nuclear Information System (INIS)

Braun, A.; Kohlbrecher, J.; Baertsch, M.; Schnyder, B.; Koetz, R.; Haas, O.; Wokaun, A.

2004-01-01

The electrochemical double layer capacitance and internal surface area of a pyrolytic carbon material after electrochemical oxidation and subsequent reduction was studied with cyclic voltammetry and small-angle neutron scattering. Oxidation yields an enhanced internal surface area (activation), and subsequent reduction causes a decrease of this internal surface area. The change of the Porod constant, as obtained from small-angle neutron scattering, reveals that the decrease in internal surface area is not caused merely by a closing or narrowing of the pores, but by a partial collapse of the pore network

Linear sweep anodic stripping voltammetry: Determination of ...

Indian Academy of Sciences (India)

The aim of this work is to determine Cr(VI) in water resources by anodic stripping voltammetry using SPE-. AuNPs modified electrode .... surface area about 4 fold). 3.2 Optimization of Parameters ..... in water samples. The above system offers a.

Insight into the template effect of vesicles on the laccase-catalyzed oligomerization of N-phenyl-1,4-phenylenediamine from Raman spectroscopy and cyclic voltammetry measurements

Science.gov (United States)

Ležaić, Aleksandra Janoševic; Luginbühl, Sandra; Bajuk-Bogdanović, Danica; Pašti, Igor; Kissner, Reinhard; Rakvin, Boris; Walde, Peter; Ćirić-Marjanović, Gordana

2016-08-01

We report about the first Raman spectroscopy study of a vesicle-assisted enzyme-catalyzed oligomerization reaction. The aniline dimer N-phenyl-1,4-phenylenediamine (= p-aminodiphenylamine, PADPA) was oxidized and oligomerized with Trametes versicolor laccase and dissolved O2 in the presence of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) vesicles (80-100 nm diameter) as templates. The conversion of PADPA into oligomeric products, poly(PADPA), was monitored during the reaction by in situ Raman spectroscopy. The results obtained are compared with UV/vis/NIR and EPR measurements. All three complementary methods indicate that at least some of the poly(PADPA) products, formed in the presence of AOT vesicles, resemble the conductive emeraldine salt form of polyaniline (PANI-ES). The Raman measurements also show that structural units different from those of “ordinary” PANI-ES are present too. Without vesicles PANI-ES-like products are not obtained. For the first time, the as-prepared stable poly(PADPA)-AOT vesicle suspension was used directly to coat electrodes (without product isolation) for investigating redox activities of poly(PADPA) by cyclic voltammetry (CV). CV showed that poly(PADPA) produced with vesicles is redox active not only at pH 1.1-as expected for PANI-ES-but also at pH 6.0, unlike PANI-ES and poly(PADPA) synthesized without vesicles. This extended pH range of the redox activity of poly(PADPA) is important for applications.

Functionalized Nanoporous Track Etched {beta}-PVDF Membrane Electrodes for Lead (II) Determination by Square Wave Anodic Stripping Voltammetry

Energy Technology Data Exchange (ETDEWEB)

Bessbousse, H [Laboratoire des Solides Irradies, CEA-CNRS-Ecole Polytechnique, 91128 Palaiseau (France); Nadhakumar, I [School of Chemistry, University of Southampton, University Road, Southampton S017 1BJ (United Kingdom); Decker, M; Clochard, M -C; Wade, T L [Laboratoire des Solides Irradies, CEA-CNRS-Ecole Polytechnique, 91128 Palaiseau (France); Barsbay, M [Hacettepe University, Department of Chemistry, Polymer Chemistry Division, 06800 Beytepe Ankara (Turkey)

2012-09-15

Track etched functionalized nanoporous {beta}-PVDF membrane electrodes, or functionalized membrane electrodes (FME), are thin-layer cells made from poly(acrylic acid) (PAA) functionalized nanoporous {beta}-poly(vinylidene fluoride) ({beta}-PVDF) membranes with thin Au films sputtered on each side as electrodes. The Au film is thin enough that the pores of the membranes are not completely covered. The PAA functionalization is specifically localised in the walls of the nanoporous {beta}-PVDF membrane by grafting. The PAA is a cation exchange polymer that adsorbs metal ions, such as Pb{sup 2+}, from aqueous solutions concentrating the ions into the membrane. After a time the FME is transferred to an electrochemical cell for analysis. A negative potential is applied to the Au film of the FME for a set time to reduce the adsorbed ions onto the Au film working electrode. The other metalized side of the FME functions as a counter electrode. Finally, square-wave anodic stripping voltammetry (SW-ASV) is performed on the FME to determine the metal ion concentrations in the original solution. The calibration curve of charge versus log concentration has a Temkin isotherm form. The FME membranes are 9 {mu}m thick and have 40 nm diameter pores with a density of 10{sup 10} pores/cm{sup 2}. This high pore density provides a large capacity for ion adsorption. Au ingress in the pores during sputtering forms a random array of nanoelectrodes. Like surface modified electrodes for adsorptive stripping voltammetry, the pre-concentration step for the FME is performed at open circuit. The zero current intercept of the calibration for Pb{sup 2+} is 0.13 ppb ({mu}g/L) and a detection limit of 0.050 ppb based on 3S/N from blank measurements. Voltammetry (CV) and chronoapmerometry (CA) were used to characterize the system. The apparent diffusion coefficient (D) for Pb{sup 2+} in the PAA functionalized pores was determined to be 2.44 x 10{sup -7} cm{sup 2}/s and the partition coefficient (p

PERUMUSAN STRATEGI BERSAING JAHE INSTAN PRODUK CV. INTRAFOOD SURAKARTA MENGGUNAKAN PERCEPTUAL MAPPING

Directory of Open Access Journals (Sweden)

Mohd. Harisudin

2013-11-01

Full Text Available Penelitian ini bertujuan untuk mengetahui posisi bersaing jahe instan produk CV. Intrafood dan strategi bersaing yang dapat direkomendasikan untuk meraih keberasilannya. Metode dasar yang digunakan adalah analisis deskriptif. Penentuan lokasi penelitian ditentukan dengan metode purposive, yaitu CV. Intrafood Surakarta. Jenis data yang digunakan dalam penelitian ini adalah data primer dan data sekunder. Metode analisis data menggunakan analisis Perceptual Mapping. Dari hasil penelitian diperoleh informasi bahwa jahe instan produk CV Intrafood berada pada peringkat ke-2 dari produk empat jahe instan yang diperbandingkan. Atribut yang dapat dijadikan kekuatan utama dalam meningkatkan pemasaran jahe instan produk CV. Intrafood adalah manfaat produk. Sisi yang paling lemah adalah atribut desain kemasan dan kinerja produk dalam kemasan. Abstract This study aims to determine the competitive position of the product instant ginger CV. Intrafood and competitive strategy can be recommended to achieve success. The basic method used is descriptive analysis. Determining the location of the study are determined by purposive method, namely CV. Intrafood Surakarta. Data used in this study is primary data and secondary data. Method analyzed using Perceptual Mapping. From the results of the study concluded that instant ginger of CV Intrafood product ranks second of four instant ginger products are compared. Attributes that can be used as a major force in improving product marketing instant ginger CV. Intrafood is the benefits of the product. The weakest side is the packaging design and performance attributes of the product in the packaging.

Synthesis and bioelectrochemical behavior of aromatic amines.

Science.gov (United States)

Shabbir, Muhammad; Akhter, Zareen; Ahmad, Iqbal; Ahmed, Safeer; Bolte, Michael; McKee, Vickie

2017-12-01

Four aromatic amines 1-amino-4-phenoxybenzene (A 1 ), 4-(4-aminophenyloxy) biphenyl (A 2 ), 1-(4-aminophenoxy) naphthalene (A 3 ) and 2-(4-aminophenoxy) naphthalene (A 4 ) were synthesized and characterized by elemental, spectroscopic (FTIR, NMR), mass spectrometric and single crystal X-ray diffraction methods. The compounds crystallized in monoclinic crystal system with space group P2 1 . Intermolecular hydrogen bonds were observed between the amine group and amine/ether acceptors of neighboring molecules. Electrochemical investigations were done using cyclic voltammetry (CV), square wave voltammetry (SWV) and differential pulse voltammetry (DPV). CV studies showed that oxidation of aromatic amines takes place at about 0.9 V (vs. Ag/AgCl) and the electron transfer (ET) process has irreversible nature. After first scan reactive intermediate were generated electrochemically and some other cathodic and anodic peaks also appeared in the succeeding scans. DPV study revealed that ET process is accompanied by one electron. DNA binding study of aromatic amines was performed by CV and UV-visible spectroscopy. These investigations revealed groove binding mode of interaction of aromatic amines with DNA. Copyright © 2017 Elsevier Inc. All rights reserved.

Steady state oxygen reduction and cyclic voltammetry

DEFF Research Database (Denmark)

Rossmeisl, Jan; Karlberg, Gustav; Jaramillo, Thomas

2008-01-01

The catalytic activity of Pt and Pt3Ni for the oxygen reduction reaction is investigated by applying a Sabatier model based on density functional calculations. We investigate the role of adsorbed OH on the activity, by comparing cyclic voltammetry obtained from theory with previously published ex...

ANALISIS WANPRESTASI KEAGENAN PENJUALAN KENDARAAN BERMOTOR (Studi CV Nobel Perdana Kabupaten Tulang Bawang

Directory of Open Access Journals (Sweden)

Heri Yulianto

2017-03-01

Full Text Available Standard by PT Sumber Trada Motor leads to no availability of vehicles to be sold by outlets CV Nobel Perdana. Giving great discounts and gifts, making consumers tend to buy directly from outlets PT Sumber Trada Motor. This agency system turns into competition due to the sales and market share CV Nobel Perdana excellent. The usefulness of this study as a researcher competence in the field of business law violations agreement. The problem of research is how the legal provisions breach agreement, the implementation of competition law to businesses which violate the agreement. Is expected to the Government through the KPPU to crack down on employers who violate the law No. 5 of 1999 on Competition, so as to control the businesses that destroy the independence of other businesses.   Keywords: Standard, Agreement, Agency

Kedudukan Para Pihak Dalam Perjanjian Waralaba Studi : Perjanjian Waralaba Antara PT. Indomarco Prismatama Dengan CV. E. Makmur

OpenAIRE

Putra, M. S. Feroni

2011-01-01

The rapid franchising business development occurs because the franchising system in general has more probable success compared to the self-performed business with a new trade mark, yet this franchising business agreement of Indomaret between PT. Indomarco Prismatama and CV. E. Makmur. The research question to be answered in this study were that were the rights what were the constraints faced by PT. Indomarco Prismatama and CV. E. Makmur in this agreement, and how did PT. Indomarco Prismatama ...

Prospective Study of Surgical Treatment of Acromegaly: Effects on Ghrelin, Weight, Adiposity, and Markers of CV Risk

Science.gov (United States)

Reyes-Vidal, Carlos; Fernandez, Jean Carlos; Bruce, Jeffrey N.; Crisman, Celina; Conwell, Irene M.; Kostadinov, Jane; Geer, Eliza B.; Post, Kalmon D.

2014-01-01

Context: Although epidemiological studies have found that GH and IGF-1 normalization reduce the excess mortality of active acromegaly to expected rates, cross-sectional data report some cardiovascular (CV) risk markers to be less favorable in remission than active acromegaly. Objective: The objective of the study was to test the hypothesis that remission of acromegaly after surgical therapy increases weight and adiposity and some CV risk markers and these changes are paralleled by a rise in ghrelin. Design: Forty-two adults with untreated, active acromegaly were studied prospectively. Changes in outcome measures from before to after surgery were assessed in 26 subjects achieving remission (normal IGF-1) and 16 with persistent active acromegaly (elevated IGF-1) after surgery. Setting: The study was conducted at tertiary referral centers for pituitary tumors. Main Outcome Measures: Endocrine, metabolic, and CV risk parameters, anthropometrics, and body composition by dual-energy X-ray absorptiometry were measured. Results: Remission increased total ghrelin, body weight, waist circumference, C-reactive protein, homocysteine, high-density lipoprotein, and leptin and reduced systolic blood pressure, homeostasis model assessment score, triglycerides, and lipoprotein (a) by 6 months and for 32 ± 4 months after surgery. The ghrelin rise correlated with the fall in the levels of GH, IGF-1, and insulin and insulin resistance. Weight, waist circumference, and ghrelin did not increase significantly in the persistent active acromegaly group. Total body fat, trunk fat, and perentage total body fat increased by 1 year after surgery in 15 remission subjects: the increase in body fat correlated with the rise in total ghrelin. Conclusions: Although most markers of CV risk improve with acromegaly remission after surgery, some markers and adiposity increase and are paralleled by a rise in total ghrelin, suggesting that these changes may be related. Understanding the mechanisms and

Instant OpenCV starter

CERN Document Server

Dalal, Jayneil

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.A practical, quick, and hands-on guide for Python developers and hobbyists who want to get started with computer vision with OpenCV.This book is great for developers, hobbyists, and students new to computer vision who are looking to get a good grounding in how to use the OpenCV library. It's assumed that you will have some basic experience in C/C++ programming.

Voltammetry and Electrocatalysis of Achrornobacter Xylosoxidans Copper Nitrite Reductase on Functionalized Au(111)-Electrode Surfaces

DEFF Research Database (Denmark)

Welinder, Anna C.; Zhang, Jingdong; Hansen, Allan G.

2007-01-01

A long-standing issue in protein film voltammetry (PFV), particularly electrocatalytic voltammetry of redox enzyme monolayers, is the variability of protein adsorption modes, reflected in distributions of catalytic activity of the adsorbed protein/enzyme molecules. Use of well-defined, atomically...... planar electrode surfaces is a step towards the resolution of this central issue. We report here the voltammetry of copper nitrite reductase (CNiR, Achromobacter xylosoxidons) on Au(111)-electrode surfaces modified by monolayers of a broad variety of thiol-based linker molecules. These represent......NiR thus shows highly efficient, close to ideal reversible electrocatalytic voltammetry on cysteamine-covered Au(111)-electrode surfaces, most likely due to two cysteamine orientations previously disclosed by in situ scanning tunnelling microscopy. Such a dual orientation exposes both a hydrophobic...

Theoretical and experimental study of redox processes combined with adsorption phenomena under conditions of square-wave voltammetry

OpenAIRE

Gulaboski, Rubin

2001-01-01

Theoretical models of four electrode reactions coupled with adsorption phenomena under conditions of square-wave voltammetry are developed: simple surface redox reaction, surface catalytic reaction, cathodic stripping reaction of I order, and cathodic stripping reaction of II order.

A combined SEM and CV Study of Solid Oxide Fuel Cell Interconnect Steels

DEFF Research Database (Denmark)

Kammer Hansen, Kent; Ofoegbu, Stanley; Mikkelsen, Lars

2012-01-01

Scanning electron microscopy and cyclic voltammetry were used to investigate the high temperature oxidation behavior of two solid oxide fuel cell interconnect steels. One alloy had a low content of manganese; the other alloy had a high content of manganese. Four reduction and four oxidation peaks...

Analisis Tingkat Kepuasan Kerja Karyawan pada CV Sumber Pangan di Denpasar

OpenAIRE

SUPRATMAN, I WAYAN NOVA; USTRIYANA, I NYOMAN GEDE; DEWI, IDA AYU LISTIA

2016-01-01

Analysis of Job Satisfaction at CV Food Sources in DenpasarHuman resources is a factor of production which is very important for a company,compared with other factors of production include natural resources, capital, andskills. The purpose of this study was to determine the level of employee satisfactionCV Food Source in Denpasar. The location determination is done deliberately. Thetotal number of the population sampled that stout 40 employees CV Source of Foodin Denpasar. The factors used in...

Ruthenium determination by the method of inversion voltammetry on graphite electrode

Energy Technology Data Exchange (ETDEWEB)

Dominova, I G; Kolpakova, N A; Stromberg, A G [Tomskij Politekhnicheskij Inst. (USSR)

1978-12-01

Optimal conditions for determining ruthenium by inversion voltammetry on a graphite electrode are 0.1 M KCl or KNO/sub 3/, pH 2-3, electrolysis potential - 1.0 V. A linear dependence of ruthenium electrodissolution current on its concentration in the solution makes it possible to use inversion voltammetry for determining 5x10/sup -7/ - 1x10/sup -4/ g-ion Ru/l. Ruthenium can be determined in the presence of a large excess of nickel and copper but commensurable amounts of mercury adn platinum metals interfere.

Clay matrix voltammetry

International Nuclear Information System (INIS)

Perdicakis, Michel

2012-01-01

Document available in extended abstract form only. In many countries, it is planned that the long life highly radioactive nuclear spent fuel will be stored in deep argillaceous rocks. The sites selected for this purpose are anoxic and satisfy several recommendations as mechanical stability, low permeability and low redox potential. Pyrite (FeS 2 ), iron(II) carbonate, iron(II) bearing clays and organic matter that are present in very small amounts (about 1% w:w) in soils play a major role in their reactivity and are considered today as responsible for the low redox potential values of these sites. In this communication, we describe an electrochemical technique derived from 'Salt matrix voltammetry' and allowing the almost in-situ voltammetric characterization of air-sensitive samples of soils after the only addition of the minimum humidity required for electrolytic conduction. Figure 1 shows the principle of the developed technique. It consists in the entrapment of the clay sample between a graphite working electrode and a silver counter/quasi-reference electrode. The sample was previously humidified by passing a water saturated inert gas through the electrochemical cell. The technique leads to well-defined voltammetric responses of the electro-active components of the clays. Figure 2 shows a typical voltammogram relative to a Callovo-Oxfordian argillite sample from Bure, the French place planned for the underground nuclear waste disposal. During the direct scan, one can clearly distinguish the anodic voltammetric signals for the oxidation of the iron (II) species associated with the clay and the oxidation of pyrite. The reverse scan displays a small cathodic signal for the reduction of iron (III) associated with the clay that demonstrates that the majority of the previously oxidized iron (II) species were transformed into iron (III) oxides reducible at lower potentials. When a second voltammetric cycle is performed, one can notice that the signal for iron (II

Application of Elimination Voltammetry to the Study of Electrochemical Reduction and Determination of the Herbicide Metribuzin

Czech Academy of Sciences Publication Activity Database

Skopalová, J.; Navrátil, Tomáš

2007-01-01

Roč. 52, č. 6 (2007), s. 961-977 ISSN 0009-2223 R&D Projects: GA ČR GA203/07/1195 Institutional research plan: CEZ:AV0Z40400503 Keywords : Elimination voltammetry with linear scan (EVLS) * metribuzin * electrochemical reduction * mercury electrodes Subject RIV: CG - Electrochemistry Impact factor: 0.529, year: 2007

Stripping voltammetry of thallium, indium and gallium on mercury-graphite electrodes

International Nuclear Information System (INIS)

Kamenev, A.I.; Kharitonova, O.I.; Chernova, N.A.; Agasyan, P.K.

1986-01-01

Electrochemical Tl(1), In(3) and Ga(3) behaviour in mercury-graphite electrodes by the method of direct-current and alternating-current voltammetry is studied. Comparison of mathematical models and their experimental check are carried out. Possibility to forecast the investigation results is shown, and the procedure for mercury-graphite electrode surface formation necessary in measurements is chosen

CV equipment responsibilities

CERN Document Server

Pirollet, B

2008-01-01

This document describes the limits of the responsibilities of the TS/CV for fire fighting equipment at the LHC. The various interfaces, providers and users of the water supply systems and clean water raising systems are described.

Microanalysis of DNA by stripping transfer voltammetry

Czech Academy of Sciences Publication Activity Database

Jelen, František; Kouřilová, Alena; Pečinka, Petr; Paleček, Emil

2004-01-01

Roč. 63, 1-2 (2004), s. 249-252 ISSN 1567-5394 R&D Projects: GA ČR GA203/02/0422; GA AV ČR IAA1163201; GA AV ČR IBS5004107 Institutional research plan: CEZ:AV0Z5004920 Keywords : DNA determination * determination of purine base s * linear sweep voltammetry Subject RIV: BO - Biophysics Impact factor: 2.261, year: 2004

Microelectrode voltammetry of multi-electron transfers complicated by coupled chemical equilibria: a general theory for the extended square scheme.

Science.gov (United States)

Laborda, Eduardo; Gómez-Gil, José María; Molina, Angela

2017-06-28

A very general and simple theoretical solution is presented for the current-potential-time response of reversible multi-electron transfer processes complicated by homogeneous chemical equilibria (the so-called extended square scheme). The expressions presented here are applicable regardless of the number of electrons transferred and coupled chemical processes, and they are particularized for a wide variety of microelectrode geometries. The voltammetric response of very different systems presenting multi-electron transfers is considered for the most widely-used techniques (namely, cyclic voltammetry, square wave voltammetry, differential pulse voltammetry and steady state voltammetry), studying the influence of the microelectrode geometry and the number and thermodynamics of the (electro)chemical steps. Most appropriate techniques and procedures for the determination of the 'interaction' between successive transfers are discussed. Special attention is paid to those situations where homogeneous chemical processes, such as protonation, complexation or ion association, affect the electrochemical behaviour of the system by different stabilization of the oxidation states.

Voltammetry at micro-mesh electrodes

Directory of Open Access Journals (Sweden)

Wadhawan Jay D.

2003-01-01

Full Text Available The voltammetry at three micro-mesh electrodes is explored. It is found that at sufficiently short experimental durations, the micro-mesh working electrode first behaves as an ensemble of microband electrodes, then follows the behaviour anticipated for an array of diffusion-independent micro-ring electrodes of the same perimeter as individual grid-squares within the mesh. During prolonged electrolysis, the micro-mesh electrode follows that behaviour anticipated theoretically for a cubically-packed partially-blocked electrode. Application of the micro-mesh electrode for the electrochemical determination of carbon dioxide in DMSO electrolyte solutions is further illustrated.

Anodic stripping voltammetry – ASV for determination of heavy metals

International Nuclear Information System (INIS)

Barón-Jaimez, J; Joya, M R; Barba-Ortega, J

2013-01-01

Although voltammetric methods presented a number of difficulties in its early stages, nowadays ''ASV'' anodic stripping voltammetry is considered one of the most sensitive electro-analytical and suitable for trace-level determination of many metals and compounds in environmental samples, clinical and industrial. Its sensitivity is attributed to the combination of a step of pre-concentration effective together with an electrochemical advanced measurement of accumulated analyte. This paper presents an overview of the voltammetry, which includes a group of electro-analytical methods, in them the information about analyte is obtained from measurements of the current flowing in an electrochemical cell when applied a potential difference to an suitable electrode system

Adsorptive stripping voltammetry in lipophilic vitamins determination

Directory of Open Access Journals (Sweden)

Milan Sýs

2016-06-01

Full Text Available The aim of this contribution was to check if adsorptive stripping differential pulse voltammetry (AdSDPV is suitable tool for sensitive simultenous electrochemical detection of lipophilic vitamins. Retinol (vitamin A1, cholecalciferol (vitamin D3, α-tocopherol (vitamin E and phylloquinone (vitamin K1 were selected as representatives. All electrochemical measurements were performed in two separate steps due to the lipophilic character of the analytes. In the first step, an accumulation of lipophilic vitamin on the surface of glassy carbon electrode (GCE was done by immersing working electrode into the aqueous‑acetonitrile solutions (50%, v/v of each vitamin (50.0 µmol.L-1 at 400 rpm for 5 min. In the second one, differential pulse voltammetry of accumulated vitamins was performed in 0.01 mol.L-1 acetate (pH 4.5 buffer at potential step (Estep 5 mV, potential of amplitude (Eampl 25 mV, interval time (t 0.1 s and scan rate (ν 50 mV.s-1. It was observed that electrochemical behaviour of lipophilic vitamins adsorbed on surface of solid GCE in the aqueous electrolyte was very similar to those performed in organic/aqueous electrolyte in literature. Due to reversible electrochemical behaviour of vitamin K1 (phylloquinone/phyllohydroquinone redox couple, it was possible to detect all lipophilic vitamins only in one analysis. Observed values of peak potentials (Ep were sufficiently different for their recognition which was confirmed by the analysis of real sample. The results obtained in this study showed that simultaneous determination of some lipophilic vitamins is possible requiring further optimization study. For this reason, it is necessary to understand this work as an initial step in simultaneous determination of lipophilic vitamins without application of any chromatographic technique.

How Adequate is your CV? Analyzing French CVs with ReaderBench

NARCIS (Netherlands)

Gutu, Gabriel; Dascalu, Mihai; Trausan-Matu, Stefan; Lepoivre, Olivier

2017-01-01

This study is aimed at presenting a new ReaderBench-based tool built to support candidates in increasing the quality of their CV for a job opening. Both the visual quality and the textual content are considered while also providing an overview and corresponding feedback for the entire CV.

Stripping Voltammetry

Science.gov (United States)

Lovrić, Milivoj

Electrochemical stripping means the oxidative or reductive removal of atoms, ions, or compounds from an electrode surface (or from the electrode body, as in the case of liquid mercury electrodes with dissolved metals) [1-5]. In general, these atoms, ions, or compounds have been preliminarily immobilized on the surface of an inert electrode (or within it) as the result of a preconcentration step, while the products of the electrochemical stripping will dissolve in the electrolytic solution. Often the product of the electrochemical stripping is identical to the analyte before the preconcentration. However, there are exemptions to these rules. Electroanalytical stripping methods comprise two steps: first, the accumulation of a dissolved analyte onto, or in, the working electrode, and, second, the subsequent stripping of the accumulated substance by a voltammetric [3, 5], potentiometric [6, 7], or coulometric [8] technique. In stripping voltammetry, the condition is that there are two independent linear relationships: the first one between the activity of accumulated substance and the concentration of analyte in the sample, and the second between the maximum stripping current and the accumulated substance activity. Hence, a cumulative linear relationship between the maximum response and the analyte concentration exists. However, the electrode capacity for the analyte accumulation is limited and the condition of linearity is satisfied only well below the electrode saturation. For this reason, stripping voltammetry is used mainly in trace analysis. The limit of detection depends on the factor of proportionality between the activity of the accumulated substance and the bulk concentration of the analyte. This factor is a constant in the case of a chemical accumulation, but for electrochemical accumulation it depends on the electrode potential. The factor of proportionality between the maximum stripping current and the analyte concentration is rarely known exactly. In fact

Study of colored anodized aluminum with calcon in sulfuric acidic solution using cyclic voltammetry and impedance measurement methods

Energy Technology Data Exchange (ETDEWEB)

Norouzi, P.; Ganjali, M.R.; Golmohamaddi, M.; Mousavi, S. [Department of Chemistry, Faculty of Science, University of Tehran, Tehran (Iran); Vatankhah, G. [Iranian Organization for Science and Technology (IROST), Isfahan Center, A5 Ghezelbash Avenue, Tohid Street, Isfahan 8173954541 (Iran)

2003-04-01

The effect of coloring condition of Al with Calcon (sodium 2,2'-dihydroxy-azonaphthalene-4-sulfonate), on the corrosion resistance of Al in 0.1 M sulfuric acid solution was studied, using cyclic voltammetry and measurement of impedance noise methods. The changes in the corrosion resistance of colored aluminum electrodes were evaluated by measuring the magnitude of impedance and cyclic voltammetric responses of anodized and colored electrodes. An irreversible corrosion response was observed at the cyclic voltammogram of the colored aluminum electrode. The current and threshold potential of corrosion responses strongly depends on the applied conditions during anodizing, coloring and sealing stages. In addition, significant changes in impedance at the ac voltammogram and noise level at some ac frequencies were observed, when the electrodes were colored under various conditions. In this regard, the surface of the electrode was studied by Scanning Electron Microscopy (SEM). Comparison of SEM images of the colored and uncolored aluminum specimens showed that the colored surface contained a significant numbers of pits. The results indicated that coloring aluminum with Calcon could reduce corrosion resistance of aluminum and increase roughness of the oxide film. (Abstract Copyright [2003], Wiley Periodicals, Inc.) [German] Mit Hilfe zyklischer Voltammetrie und Messungen mit Impedanzrauschmethoden wurde der Einfluss der Faerbungsbedingungen von Aluminium mit Calcon (Natrium 2,2'-Dihydroxyazonaphthalen-4-Sulfonat) auf den Korrosionswiderstand von Aluminium in 0,1 M Schwefelsaeure untersucht. Die Veraenderungen des Korrosionswiderstandes von gefaerbten Aluminiumelektroden wurden durch Messungen der Hoehe der Impedanzreaktion bzw. der Reaktion bei der zyklischen Voltammetrie von anodisierten und gefaerbten Elektroden beurteilt. Eine irreversible Korrosionsreaktion wurde beim zyklischen Voltammogramm der gefaerbten Aluminiumelektrode beobachtet. Der Strom und das

Chemometric study of Maya Blue from the voltammetry of microparticles approach.

Science.gov (United States)

Doménech, Antonio; Doménech-Carbó, María Teresa; de Agredos Pascual, María Luisa Vazquez

2007-04-01

The use of the voltammetry of microparticles at paraffin-impregnated graphite electrodes allows for the characterization of different types of Maya Blue (MB) used in wall paintings from different archaeological sites of Campeche and YucatAn (Mexico). Using voltammetric signals for electron-transfer processes involving palygorskite-associated indigo and quinone functionalities generated by scratching the graphite surface, voltammograms provide information on the composition and texture of MB samples. Application of hierarchical cluster analysis and other chemometric methods allows us to characterize samples from different archaeological sites and to distinguish between samples proceeding from different chronological periods. Comparison between microscopic, spectroscopic, and electrochemical examination of genuine MB samples and synthetic specimens indicated that the preparation procedure of the pigment evolved in time via successive steps anticipating modern synthetic procedures, namely, hybrid organic-inorganic synthesis, temperature control of chemical reactivity, and template-like synthesis.

Analysis Of The Underpotential Deposition Of Cadmium On Copper

Directory of Open Access Journals (Sweden)

Kowalik R.

2015-09-01

Full Text Available In this study the process of deposition of cadmium on polycrystalline copper electrode in sulfate solution was investigated. The process of underpotential and bulk deposition was analyzed by classical electrochemical method: cyclic voltammetry(CV, anodic stripping voltammetry(ASV and electrochemical quartz crystal microbalance(EQCM. The obtained results were compared with electrochemical impedance spectroscopy(EIS measurements. CV, EQCM and EIS results suggest that the UPD of cadmium starts below potential −0.4 V vs Ag/AgCl. Additionally the stripping analysis indicates the formation of cadmium monolayer with different density of deposited atoms depending on the applied potential. The transition from UPD to bulk deposition occurs below potential −0,7 V.

Assembly of the Lactuca sativa, L. cv. Tizian draft genome sequence reveals differences within major resistance complex 1 as compared to the cv. Salinas reference genome.

Science.gov (United States)

Verwaaijen, Bart; Wibberg, Daniel; Nelkner, Johanna; Gordin, Miriam; Rupp, Oliver; Winkler, Anika; Bremges, Andreas; Blom, Jochen; Grosch, Rita; Pühler, Alfred; Schlüter, Andreas

2018-02-10

Lettuce (Lactuca sativa, L.) is an important annual plant of the family Asteraceae (Compositae). The commercial lettuce cultivar Tizian has been used in various scientific studies investigating the interaction of the plant with phytopathogens or biological control agents. Here, we present the de novo draft genome sequencing and gene prediction for this specific cultivar derived from transcriptome sequence data. The assembled scaffolds amount to a size of 2.22 Gb. Based on RNAseq data, 31,112 transcript isoforms were identified. Functional predictions for these transcripts were determined within the GenDBE annotation platform. Comparison with the cv. Salinas reference genome revealed a high degree of sequence similarity on genome and transcriptome levels, with an average amino acid identity of 99%. Furthermore, it was observed that two large regions are either missing or are highly divergent within the cv. Tizian genome compared to cv. Salinas. One of these regions covers the major resistance complex 1 region of cv. Salinas. The cv. Tizian draft genome sequence provides a valuable resource for future functional and transcriptome analyses focused on this lettuce cultivar. Copyright © 2017 Elsevier B.V. All rights reserved.

The role of seed size in the non-genetic variation exhibited in salt tolerance studies involving the bread wheat cv. chinese spring

Directory of Open Access Journals (Sweden)

P. K. Martin

2014-01-01

Full Text Available The intention of this study was to confirm the role of seed size in the non-genetic variation exhibited during salinity tolerance experiments involving the bread wheat cv. Chinese Spring. The nutrient film/rockwool hydroponics technique was utilised. This study concluded that seed size does not play a significant role in the non-genetic variation generated during a study of salinity tolerance of the bread wheat cv. Chinese Spring.

Study of the TAF 2012 DriveLine (CV-CD

Directory of Open Access Journals (Sweden)

Alexandru POZDÎRCĂ

2016-06-01

Full Text Available TAF is the acronym for Articulated Forestry Tractor – a heavy vehicle uses in a logging operation for pulling cut trees out of a forest, in a process called “skidding”. TAF use a cardan shafts transmission from the gear box (CV to distribution box (CD. The distribution box split the movement thru axels or winch. The study applied the cardan theory on a specific case and based on the numeric results a few design modifications are proposed for reducing the angular velocity pulse on the CD input shaft. Theoretical results may have a significant importance in practice, impacting the reduction of transmission noise and vibrations - already claimed in the case of the distribution box for the current constructive solution. An original AutoLISP program are made in order to analyze and optimize the transmission, with graphical results.

Carbon paste electrode incorporating multi-walled carbon nanotube ...

Indian Academy of Sciences (India)

The preparation and electrochemical performance of the carbon nanotube paste electrode modified with ferrocene (FCMCNPE) was investigated for electrocatalytic behaviour toward oxidation of -acetyl--cysteine (NAC) in the presence of tryptophan (Trp) using cyclic voltammetry (CV) and differential pulse voltammetry ...

IMPACT OF POLYCYCLIC AROMATIC HYDROCARBONS OF THE ELECTROCHEMICAL RESPONSES OF A FERRICYNIDE PROBE AT TEMPLATE-MODIFIED SELF ASSEMBLED MONOLAYERS ON GOLD ELECTRODES

Science.gov (United States)

The impact of pyrene on the electrochemical response of the ferricyanide probe using Self Assembled Monolayer (SAM)-modified gold electrodes was investigated using Cyclic Voltammetry (CV) and Square Wave Voltammetry (SWV). These results suggest the feasibility of using SAMs, par...

Anodic stripping voltammetry using graphite composite solid electrode

Czech Academy of Sciences Publication Activity Database

Navrátil, Tomáš; Barek, J.; Kopanica, Miloslav

2009-01-01

Roč. 74, 11-12 (2009), s. 1807-1826 ISSN 0010-0765 R&D Projects: GA AV ČR IAA400400806; GA ČR GA203/07/1195; GA MŠk(CZ) LC06035 Institutional research plan: CEZ:AV0Z40400503 Keywords : Graphite composite solid electrode * voltammetry * metals Subject RIV: CG - Electrochemistry Impact factor: 0.856, year: 2009

Technetium electrodeposition from aqueous formate solutions at graphite electrode: electrochemical study

International Nuclear Information System (INIS)

Maslennikov, A.; Peretroukhine, V.; Masson, M.; Lecomte, M.

1999-01-01

Recovery of technetium from aqueous formate buffer solutions of ionic strength μ = 1.0 was studied in the pH interval from 1.6 to 7.5 at graphite cathode in an electrolytic cell with separated compartments was studied, using cyclic voltammetry (CV) and inverse stripping voltammetry (ISV) techniques. It has been shown that Tc electrodeposition process becomes possible at the potentials of graphite cathode E cath. 1/2 = -0.72±0.02 V/SCE and was pH independent in the interval pH = 3.46-7.32. Mechanism of electrodeposition, including Tc(VII)/Tc(IV) reduction in the solution followed by Tc(IV) hydrolysis at the electrode surface with formation of hydrated Tc oxide cathodic deposit has been proposed. The further precision of the Tc(VII) electrochemical reduction mechanism in formate buffer media and optimization of the electrodeposition process seems to be possible using additional analytical facilities except electrochemical methods. (orig.)

Instant OpenCV for iOS

CERN Document Server

Kornyakov, Kirill

2013-01-01

Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. This book uses a very practical approach, with each recipe and their associated sample projects or examples focusing on a particular aspect of the technology.This book is intended for OpenCV developers who are interested in porting their applications to the iOS platform. Basic experience with OpenCV, computer vision, Objective C, and other iOS tools is encouraged.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniqueswere employed to clarify the changes in charge transfer during the fabrication and utilization of the DNA biosensor. The DNA hybridization event was monitored by differential pulse voltammetry (DPV). Under optimal conditions, the ...

Cyclic voltammetry study of PEO processing of porous Ti and resulting coatings

Science.gov (United States)

Shbeh, Mohammed; Yerokhin, Aleksey; Goodall, Russell

2018-05-01

Ti is one of the most commonly used materials for biomedical applications. However, there are two issues associated with the use of it, namely its bio-inertness and high elastic modulus compared to the elastic modulus of the natural bone. Both of these hurdles could potentially be overcome by introducing a number of pores in the structure of the Ti implant to match the properties of the bone as well as improve the mechanical integration between the bone and implant, and subsequently coating it with a biologically active ceramic coating to promote chemical integration. Hence, in this study we investigated the usage of cyclic voltammetry in PEO treatment of porous Ti parts with different amount of porosity produced by both Metal Injection Moulding (MIM) and MIM in combination with a space holder. It was found that porous samples with higher porosity and open pores develop much thicker surface layers that penetrate through the inner structure of the samples forming a network of surface and subsurface coatings. The results are of potential benefit in producing surface engineered porous samples for biomedical applications which do not only address the stress shielding problem, but also improve the chemical integration.

Voltammetry under a Controlled Temperature Gradient

Directory of Open Access Journals (Sweden)

Jan Krejci, Jr.

2010-07-01

Full Text Available Electrochemical measurements are generally done under isothermal conditions. Here we report on the application of a controlled temperature gradient between the working electrode surface and the solution. Using electrochemical sensors prepared on ceramic materials with extremely high specific heat conductivity, the temperature gradient between the electrode and solution was applied here as a second driving force. This application of the Soret phenomenon increases the mass transfer in the Nernst layer and enables more accurate control of the electrode response enhancement by a combination of diffusion and thermal diffusion. We have thus studied the effect of Soret phenomenon by cyclic voltammetry measurements in ferro/ferricyanide. The time dependence of sensor response disappears when applying the Soret phenomenon, and the complicated shape of the cyclic voltammogram is replaced by a simple exponential curve. We have derived the Cotrell-Soret equation describing the steady-state response with an applied temperature difference.

Polymyxin-coated Au and carbon nanotube electrodes for stable [NiFe]-hydrogenase film voltammetry.

NARCIS (Netherlands)

Hoeben, F.J.M.; Heller, I.; Albracht, S.P.J.; Dekker, C.; Lemay, S.G.; Heering, H.A.

2008-01-01

We report on the use of polymyxin (PM), a cyclic cationic lipodecapeptide, as an electrode modifier for studying protein film voltammetry (PFV) on Au and single-walled carbon nanotube (SWNT) electrodes. Pretreating the electrodes with PM allows for the subsequent immobilization of an active

Analisis Pengawasan Logistik Produk Aqua Ukuran 330ml Pada CV. Dlu'x Resto Samarinda

OpenAIRE

Mardiana, Ali Masuhud, H. Mulyadi Syp

2016-01-01

The problem in this research is "Are Determination Against Aqua Products Logistics Control 330ml sizes on CV. DLux Resto has been optimized? "This study aims to determine the amount of inventory on the CV aqua 330ml sizes. Dlu'x Resto in Samarinda.Formulation of the problem in this study is whether the determination of the logistical monitoring product inventory aqua 330ml sizes that have been carried out on the CV. Dlu'x Resto Samarinda already performed optimally.The hypothesis in this stud...

Maintaining Growth and Sustainable Strategy in Brown Sugar Business, and the Investment Financing Alternative Decision (Case Study: CV. Delovry Sukses Gemilang)

OpenAIRE

Ariyani, Laurentia Nindita; Siahaan, Uke MMP

2013-01-01

CV. Delovry Sukses Gemilang (CV. DSG) is a brown sugar supplier from manufacturers in Maron Village, Blitar, to the warehouse of distributors which is located in Tambun, Bekasi. In doing the business, CV. DSG provides the working capital to the collectors in Blitar to produce and pack the brown sugar. Fluctuating commodity prices of sugar cane leads CV. DSG to be difficult to continually maintain the business and shipping costs which is a way further from Blitar to Bekasi. These issues lead C...

Pengaruh Budaya Organisasi, Kepemimpinan, dan Motivasi Kerja terhadap Kepuasan Kerja Karyawan CV Surya Raya

Directory of Open Access Journals (Sweden)

Laksmi Sito Dwi Irvianti

2012-05-01

Full Text Available This research was conducted on CV Surya Raya which is engaged in car shipping. The aim of this study is to determine the influence of organization culture, leadership, and working motivation partially to employees’ satisfaction in CV Surya Raya. The data was collected by conducting interviews with the company and distributing questionnaires to 67 employees as respondents and then analyzed using linear regression analysis method. From the research results, leadership variable does not have a significant impact on employees' job satisfaction in CV Surya Raya. Whereas, the motivation variable has greater influence on job satisfaction of CV Surya Raya employees compared to the organization's culture.

Een bepalingsmethode voor thallium in regenwater met behulp van voltammetrie

NARCIS (Netherlands)

Struijs; J.; Wolfs; P.M.; Esseveld; F.G.van

1985-01-01

In dit rapport wordt een bepalingmethode beschreven voor thallium in het nanogram/liter-gebied, waarbij gebruik wordt gemaakt van differentiele pulse-anodic stripping voltammetry (DPASV) aan de dunne kwikfilm. Met deze techniek blijkt het mogelijk om de concentratie van dit element rechtstreeks

Analisis Pengaruh Lingkungan Kerja dan Pemberian Kompensasi terhadap Kinerja Karyawan CV Mum Indonesia

Directory of Open Access Journals (Sweden)

Jerry M. Logahan

2012-05-01

Full Text Available Mum CV is a company engaged in the sale of bread. To increase sales of bread (performance it needs to investigate the influence of work environment and compensation of employees. The method of analysis used in this study is descriptive, Pearson Regression, and Multiple Regression. The data were obtained from the employees performance by completing the questionnaires provided using Likert scale which was useful to determine the level of disagreement questions on the questionnaires. Results achieved in this study are the work environment has no significant influence on employees performance in CV Mum Indonesia, amounting to 0,068. Compensation has significant, no influence on employees performance in CV Mum Indonesia that is equal to 0,580 and there is a significant effect of 33.6%. Work environment and compensation have a significant impact on employees performance in CV Mum Indonesia. It is equal to 0,580 and there is a significant effect of 33.6%.

Oxidation management of white wines using cyclic voltammetry and multivariate process monitoring.

Science.gov (United States)

Martins, Rui C; Oliveira, Raquel; Bento, Fatima; Geraldo, Dulce; Lopes, Vitor V; Guedes de Pinho, Paula; Oliveira, Carla M; Silva Ferreira, Antonio C

2008-12-24

The development of a fingerprinting strategy capable to evaluate the "oxidation status" of white wines based on cyclic voltammetry is proposed here. It is known that the levels of specific antioxidants and redox mechanisms may be evaluated by cyclic voltammetry. This electrochemical technique was applied on two sets of samples. One group was composed of normal aged white wines and a second group obtained from a white wine forced aging protocol with different oxygen, SO(2), pH, and temperature regimens. A study of antioxidant additions, namely ascorbic acid, was also made in order to establish a statistical link between voltammogram fingerprints and chemical antioxidant substances. It was observed that the oxidation curve presented typical features, which enables sample discrimination according to age, oxygen consumption, and antioxidant additions. In fact, it was possible to place the results into four significant orthogonal directions, compressing 99.8% of nonrandom features. Attempts were made to make voltammogram fingerprinting a tool for monitoring oxidation management. For this purpose, a supervised multivariate control chart was developed using a control sample as reference. When white wines are plotted onto the chart, it is possible to monitor the oxidation status and to diagnose the effects of oxygen regimes and antioxidant activity. Finally, quantification of substances implicated in the oxidation process as reagents (antioxidants) and products (off-flavors) was tried using a supervised algorithmic the partial least square regression analysis. Good correlations (r > 0.93) were observed for ascorbic acid, Folin-Ciocalteu index, total SO(2), methional, and phenylacetaldehyde. These results show that cyclic voltammetry fingerprinting can be used to monitor and diagnose the effects of wine oxidation.

Electrochemical studies and analysis of 1–10 wt% UCl3 concentrations in molten LiCl–KCl eutectic

International Nuclear Information System (INIS)

Hoover, Robert O.; Shaltry, Michael R.; Martin, Sean; Sridharan, Kumar; Phongikaroon, Supathorn

2014-01-01

Three electrochemical methods – cyclic voltammetry (CV), chronopotentiometry (CP), and anodic stripping voltammetry (ASV) – were applied to solutions of up to 10 wt% UCl 3 in the molten LiCl–KCl eutectic salt at 500 °C to determine electrochemical properties and behaviors and to help provide a scientific basis for the development of an in situ electrochemical probe for determining the concentration of uranium in a used nuclear fuel electrorefiner. Diffusion coefficients of UCl 4 and UCl 3 were calculated to be (6.72 ± 0.360) × 10 −6 cm 2 /s and (1.04 ± 0.17) × 10 −5 cm 2 /s, respectively. Apparent standard reduction potentials were determined to be (−0.381 ± 0.013) V and (−1.502 ± 0.076) V vs. 5 mol% Ag/AgCl or (−1.448 ± 0.013) V and (−2.568 ± 0.076) V vs. Cl 2 /Cl − for the U(IV)/U(III) and U(III)/U redox couples, respectively. In comparing this data with supercooled thermodynamic data to determine activity coefficients, the thermodynamic database used was important with resulting activity coefficients ranging from 2.34 × 10 −3 to 1.08 × 10 −2 for UCl 4 and 4.94 × 10 −5 to 4.50 × 10 −4 for UCl 3 . Of anodic stripping voltammetry and cyclic voltammetry anodic or cathodic peaks, the CV cathodic peak height divided by square root of scan rate was shown to be the most reliable method of determining UCl 3 concentration in the molten salt

Anonymous voting for multi-dimensional CV quantum system

International Nuclear Information System (INIS)

Shi Rong-Hua; Xiao Yi; Shi Jin-Jing; Guo Ying; Lee, Moon-Ho

2016-01-01

We investigate the design of anonymous voting protocols, CV-based binary-valued ballot and CV-based multi-valued ballot with continuous variables (CV) in a multi-dimensional quantum cryptosystem to ensure the security of voting procedure and data privacy. The quantum entangled states are employed in the continuous variable quantum system to carry the voting information and assist information transmission, which takes the advantage of the GHZ-like states in terms of improving the utilization of quantum states by decreasing the number of required quantum states. It provides a potential approach to achieve the efficient quantum anonymous voting with high transmission security, especially in large-scale votes. (paper)

Use of cyclic voltammetry and electrochemical impedance spectroscopy for determination of active surface area of modified carbon-based electrodes

International Nuclear Information System (INIS)

Souza, Leticia Lopes de

2011-01-01

Carbon-based electrodes as well the ion exchange electrodes among others have been applied mainly in the treatment of industrial effluents and radioactive wastes. Carbon is also used in fuel cells as substrate for the electrocatalysts, having high surface area which surpasses its geometric area. The knowledge of the total active area is important for the determination of operating conditions of an electrochemical cell with respect to the currents to be applied (current density). In this study it was used two techniques to determine the electrochemical active surface area of glassy carbon, electrodes and ion exchange electrodes: cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The experiments were carried out with KNO 3 0.1 mol.L -1 solutions in a three-electrode electrochemical cell: carbon-based working electrode, platinum auxiliary electrode and Ag/AgCl reference electrode. The glassy carbon and porous carbon electrodes with geometric areas of 3.14 x 10 -2 and 2.83 X 10 -1 cm 2 , respectively, were used. The ion exchange electrode was prepared by mixing graphite, carbon, ion exchange resin and a binder, and this mixture was applied in three layers on carbon felt, using a geometric area of 1.0 cm 2 during the experiments. The capacitance (Cd) of the materials was determined by EIS using Bode diagrams. The value of 172 μF.cm -2 found for the glassy carbon is consistent with the literature data (∼ 200 μF.cm'- 2 ). By VC, varying the scan rate from 0.2 to 2.0 mV.s-1, the capacitance CdS (S = active surface area) in the region of the electric double layer (EDL) of each material was determined. By EIS, the values of C d , 3.0 x 10 -5 μF.cm'- 2 and 11 x 10 3 μF.cm-2, were found for the porous carbon and ion exchange electrodes, respectively, which allowed the determination of active surface areas as 3.73 x 106 cm 2 and 4.72 cm 2 . To sum up, the combined use of EIS and CV techniques is a valuable tool for the calculation of active surface

Voltametrické stanovení léčiva simvastatin na uhlíkové pastové elektrodě a stříbrné pevné amalgamové elektrodě

OpenAIRE

Hrochová, Zuzana

2015-01-01

This master thesis is focused on determination simvastain by cyclic voltammetry (CV), DC voltammetry (DCV), and differential pulse voltammetry (DPV) at a carbon paste electrode and a silver solid amalgam electrode. The optimum conditions for determination of simvastatin were found and under these conditions, concentration dependences were measured and the limits of detection (LOD) and limits of quantification (LOQ) were calculated for each method. The optimum conditions for determination simv...

Mineralogy and Petrography of MIL 090001, a Highly Altered CV Chondrite from the Reduced Sub-Group

Science.gov (United States)

Keller, Lindsay P.

2011-01-01

MIL 090001 is a large (greater than 6 kg) CV chondrite from the reduced subgroup (CV(sub red)) that was recovered during the 2009-2010 ANSMET field season [1]. The CV(sub red) subgroup meteorites retain primitive characteristics and have escaped the Na and Fe meta-somatism that affected the oxidized (CV(sub ox)) subgroups. MIL 090001 is, however, reported to be altered [1], and thus a major objective of this study is to characterize its mineralogy and petrography and the extent of the alteration.

Anodic Stripping Voltammetry for Arsenic Determination on Composite Gold Electrode

Czech Academy of Sciences Publication Activity Database

Navrátil, Tomáš; Kopanica, M.; Krista, J.

2003-01-01

Roč. 48, č. 2 (2003), s. 265-272 ISSN 0009-2223 Grant - others:GIT(AR) 101/02/U111/CZ Institutional research plan: CEZ:AV0Z4040901 Keywords : arsenic determination * stripping voltammetry * composite gold electrode Subject RIV: CG - Electrochemistry Impact factor: 0.415, year: 2003

Cyclic Voltammetry of Biopolymer Heparin at PVC Plasticized Liquid Membrane

Czech Academy of Sciences Publication Activity Database

Samec, Zdeněk; Trojánek, Antonín; Langmaier, Jan; Samcová, E.

2003-01-01

Roč. 5, - (2003), s. 867-870 ISSN 1388-2481 R&D Projects: GA ČR GA203/04/0424 Institutional research plan: CEZ:AV0Z4040901 Keywords : cyclic voltammetry * PVC plasticized liquit membrane * heparin Subject RIV: CG - Electrochemistry Impact factor: 2.300, year: 2003

Voltammetry of hypoxic cells radiosensitizer etanidazole radical anion in water

Czech Academy of Sciences Publication Activity Database

Gál, Miroslav; Hromadová, Magdaléna; Pospíšil, Lubomír; Híveš, J.; Sokolová, Romana; Kolivoška, Viliam; Kocábová, Jana

2010-01-01

Roč. 78, č. 2 (2010), s. 118-123 ISSN 1567-5394 R&D Projects: GA ČR GP203/09/P502 Institutional research plan: CEZ:AV0Z40400503 Keywords : etanidazole * radiosensitizer * electron transfer * voltammetry Subject RIV: CG - Electrochemistry Impact factor: 3.520, year: 2010

Characterization of the Redox reaction of V(V) in Ammonia Buffers with Square-Wave Voltammetry

OpenAIRE

Mirceski, Valentin; Gulaboski, Rubin; Petrovska-Jovanovic, Simka; Stojanova, Kornelija

2001-01-01

The redox reaction of V(V) in ammonia buffers solution with pH = 8.60 was studied by means of square-wave and cyclic voltammetry. The redox reaction studied exhibits properties of a surface redox process in which both the reactant and the product of the redox reaction are immobilized on the electrode surface.

Electron transport and electrocatalytic properties of MWCNT/nickel nanocomposites: hydrazine and diethylaminoethanethiol as analytical probes

CSIR Research Space (South Africa)

Adekunle, AS

2010-06-01

Full Text Available of the electrodes with the Ni and NiO nanoparticles was confirmed by techniques such as FTIR, FESEM, HRSEM, TEM, XRD, EDX and cyclic voltammetry (CV). The electrocatalytic oxidation of DEAET and hydrazine on the modified electrodes was investigated using CV...

Temperature-programmed reduction and cyclic voltammetry of Pt/carbon-fibre paper catalysts for methanol electrooxidation

International Nuclear Information System (INIS)

Attwood, P.A.; McNicol, B.D.; Short, R.T.

1981-01-01

Temperature-programmed reduction (TPR) and cyclic voltammetry (CV) studies of platinum catalysts supported on pyrographite-coated carbon-fibre paper, and prepared by either ion exchange or impregnation, clearly demonstrate the nature of the interactions between the platinum species and the support. After drying the above catalysts at 120 0 C, the ion-exchanged preparation exhibits the stronger interaction with the carbon support, as might be expected since a chemical interaction with carbon surface groups is known to occur in such catalysts. The presence of a fraction of bulk Pt(NH 3 ) 4 (OH) 2 impregnating salt in the impregnated catalyst has been detected using TPR. After air activation at 300 0 C, subambient reduction peaks were observed and the strength of binding of Pt in the ion-exchanged catalyst was reflected by its increased difficulty of reduction in comparison with that of the impregnated catalyst. The stoichiometry of reduction in ion-exchanged catalysts corresponds to Pt 2+ → Pt 0 in both dried and activated catalysts, with a small amount of Pt 4+ present in the latter. Upon activation the impregnated catalyst showed the presence of some Pt metal, which was thought to arise from the decomposition of the fraction of bulk Pt(NH 3 ) 4 (OH) 2 in the dried catalyst. Activation of ion-exchanged catalysts at temperatures higher than 300 0 C led to a progressive weakening of the Pt-support interaction and consequent smaller Pt surface areas. Activation at 500 0 C in air produced Pt metal exclusively and very low Pt surface areas. The strong interaction between Pt and the carbon support upon activation of the ion-exchanged catalyst at 300 0 C is thought to be the origin of the large metal surface area and the high catalytic activity for methanol electrooxidation found upon reduction

Electrocatalytic reduction of nitrate at low concentration on coinage and transition-metal electrodes in acid solutions

NARCIS (Netherlands)

Dima, G.E.; Vooys, de A.C.A.; Koper, M.T.M.

2003-01-01

A comparative study was performed to determine the reactivity of nitrate ions at 0.1 M on eight different polycrystalline electrodes (platinum, palladium, rhodium, ruthenium, iridium, copper, silver and gold) in acidic solution using cyclic voltammetry (CV), chronoamperometry and differential

Evaluation of colloidal Ag and Ag-alloys as anode electrocatalysts for direct borohydride fuel cells

Energy Technology Data Exchange (ETDEWEB)

Atwan, Mohammed H.; Northwood, Derek O. [Mechanical, Auto, and Materials Engineering, University of Windsor, Windsor, N9B 3P4 (Canada); Gyenge, Elod L. [Chemical and Biological Engineering, The University of British Colombia, Vancouver, BC, V6T 1Z4 (Canada)

2007-10-15

In this study, colloidal silver and silver-alloys (Ag-Pt, Ag-Au, Ag-Ir, and Ag-Pd) prepared by the Boenneman technique were evaluated as anode catalysts for sodium borohydride oxidation using cyclic voltammetry (CV), chronoamperometry (CA), chronopotentiometry (CP) and rotating disk electrode (RDE) voltammetry. The CV results show that the colloidal Ag-alloys were electrochemically active towards borohydride oxidation with oxidation potentials ranging between -0.7 and 0.4 V vs. Hg/HgO (MOE). The most negative oxidation potential was recorded on Ag-Pt. CA results show that the steady state current density was highest on Ag-Pt, followed by Ag-Ir, Ag-Au, and Ag-Pd. The lowest overpotential was recorded on Ag-Ir for a current step change of 10mAcm{sup -2}. A significant temperature effect and a small rotation speed effect were found in the rotating disc voltammetry for all the investigated colloids. The highest peak current was recorded on Ag-Au, while the most negative peak potential was recorded on Ag-Ir. (author)

Copper-based electrochemical sensor with palladium electrode for cathodic stripping voltammetry of manganese.

Science.gov (United States)

Kang, Wenjing; Pei, Xing; Bange, Adam; Haynes, Erin N; Heineman, William R; Papautsky, Ian

2014-12-16

In this work, we report on the development of a palladium-based, microfabricated point-of-care electrochemical sensor for the determination of manganese using square wave cathodic stripping voltammetry. Heavy metals require careful monitoring, yet current methods are too complex for a point-of-care system. Voltammetry offers an attractive approach to metal detection on the microscale, but traditional carbon, gold, or platinum electrodes are difficult or expensive to microfabricate, preventing widespread use. Our sensor uses palladium working and auxiliary electrodes and integrates them with a copper-based reference electrode for simple fabrication and compatibility with microfabrication and printed circuit board processing, while maintaining competitive performance in electrochemical detection. Copper electrodes were prepared on glass substrate using a combination of microfabrication procedures followed by electrodeposition of palladium. The disposable sensor system was formed by bonding a poly(dimethylsiloxane) (PDMS) well to the glass substrate. Cathodic stripping voltammetry of manganese using our new disposable palladium-based sensors exhibited 334 nM (18.3 ppb) limit of detection in borate buffer. The sensor was used to demonstrate manganese determination in natural water samples from a pond in Burnet Woods, located in Cincinnati, OH, and the Ohio River.

A practical introduction to computer vision with OpenCV

CERN Document Server

Dawson-Howe, Kenneth

2014-01-01

Explains the theory behind basic computer vision and provides a bridge from the theory to practical implementation using the industry standard OpenCV libraries Computer Vision is a rapidly expanding area and it is becoming progressively easier for developers to make use of this field due to the ready availability of high quality libraries (such as OpenCV 2).  This text is intended to facilitate the practical use of computer vision with the goal being to bridge the gap between the theory and the practical implementation of computer vision. The book will explain how to use the relevant OpenCV

cv. “Sukali Ndiizi”- AAB

African Journals Online (AJOL)

Clara

2013-03-27

Mar 27, 2013 ... improve transformation and regeneration efficiency of banana (cv. “Sukali .... Vuylsteke (1989) proliferation medium in the tissue culture .... DNA repair machinery is more active during cell division ... Biology-Plant 40:31-45.

Determination of copper in whole blood by differential pulse adsorptive stripping voltammetry

Directory of Open Access Journals (Sweden)

Tarik Attar

2014-02-01

Full Text Available A selective and sensitive method for determination of copper in blood by adsorptive differential pulse cathodic stripping voltammetry is presented. The method is based on adsorptive accumulation of the complexes of Cu (II ions with benzenesulfonyl hydrazide onto hanging mercury drop electrode (HMDE, followed by the reduction of the adsorbed species by differential pulse cathodic stripping voltammetry. The effect of various parameters such as supporting electrolyte, concentration of benzenesulfonyl hydrazide, accumulation potential, accumulation time and stirring rate on the selectivity and sensitivity were studied. The optimum conditions for determination of copper include perchloric acid 0.03 M, concentration of benzenesulfonyl hydrazide 7.5×10-5 M, the accumulation potential of -350 mV (vs. Ag/AgCl, the accumulation time of 50 s, and the scan rate of 50 mV s-1. Under optimized conditions, linear calibration curves were established for the concentration of Cu (II in the range of 0.62-275 ng mL-1, with detection limit of 0.186 ng mL-1 for Cu (II. The procedure was successfully applied to the determination of copper ion in whole blood samples.

CV-Online tahab Londoni börsile / Annika Matson

Index Scriptorium Estoniae

Matson, Annika, 1976-

2004-01-01

Personaliotsinguga tegelev firma tahab tulevikus minna Londoni ja OMXi börsile. Diagramm: CV-Online Group loodab tänavu esmakordselt positiivse kulumieelse ärikasumi. Vt. samas: Üks CV-Online'i aktsionäridest on ka Google'i aktsionär; Väsinud ootamast esimest IPOt

Voltammetry and In Situ Scanning Tunneling Microscopy of Cytochrome c Nitrite Reductase on Au(111)-Electrodes

DEFF Research Database (Denmark)

Gwyer, James; Zhang, Jingdong; Butt, Julea

2006-01-01

of the density and orientational distribution of NrfA molecules are disclosed. The submonolayer coverage resolved by in situ STM is readily reconciled with the failure to detect nonturnover signals in cyclic voltammetry of the NrfA films. The molecular structures show a range of lateral dimensions...... a direct approach to correlate electrocatalytic and molecular properties of the protein layer, a long-standing issue in protein film voltammetry....

CV : [luuletused] / Mari Vallisoo

Index Scriptorium Estoniae

Vallisoo, Mari, 1950-2013

2007-01-01

Sisu: CV ; Sõnaraamat ; Tegijad ; "Kus leemekulp?..." ; "Veel üks viimnepäev mis asja teha sellega..." ; "Ülemise riiuli ääre pääl...", "Alkeemik Alberti elamus...", "Valge pulber veel enam valgega...", "Meie isa, kes sa...", "Ükskord, kui Maa...", "Kevadvesi ja -pori...", "Mõisnik Meeskurat müüs mu vaarisale..."

ANALISIS SEWA MENYEWA PARALEL PADA PERUSAHAAN RENT CAR CV. HARKAT DALAM PERSPEKTIF EKONOMI ISLAM

Directory of Open Access Journals (Sweden)

Samsuardi Samsuardi

2013-12-01

Full Text Available This study aims at determining the parallel process of car rental agreement between Harkat Rent Car Company and the owner of the car, and between the company and its customers in an Islamic economics perspective. This study also aims to analyze the risk coverage of the leased car. The data for this study was gathered through interviews, observation and documentation studies. The collected data was then analyzed using descriptive analysis method. Results showed that the process of car leasing begin when customer rented a car from CV. Harkat which was owned by its partner. The company provided a shared price for car owners according to a mutual agreement and applied only for a certain period. Furthermore, the partner has to allocate 20 percent of the income for the company. In addition, the company also required the partner to cover for maintenance costs, insurance, equipment, and spare parts. In the context of Islamic economics, the practice of leasing parallel conducted by the company was not fully Shariah compliance due to practice a lease above a lease and using two contracts in one transaction. =========================================== Penelitian ini bertujuan untuk mengetahui perjanjian sewa menyewa mobil secara paralel antara Perusahaan Rent Car CV. Harkat dengan pemilik mobil dan dengan konsumennya dalam perspektif ekonomi Islam. Penelitian ini juga bertujuan untuk menanganalisis pertanggungan resiko terhadap mobil yang dijadikan objek sewa menyewa tersebut sewa menyewa mobil di Perusahaan Rent Car CV. Data untuk penelitian ini bersumber dari wawancara, obesrvasi dan studi dokumentasi. Metode yang digunakan dalam penelitian ini adalah deskriptif analisis. Hasil penelitian menunjukkan bahwa CV. Harkat menyewakan mobil milik mitra kerjanya (pemilik mobil kepada pelanggan yang membutuhkan sewa mobil untuk keperluannya. Pemilik usaha memberikan harga kongsi kepada pemilik mobil sesuai dengan kesepakatan bersama dan untuk jangka waktu

Evidence of metallic plating on archaeological artefacts by voltammetry of microparticles

Czech Academy of Sciences Publication Activity Database

Ottenwelter, Estelle; Costa, V.

2015-01-01

Roč. 57, č. 3 (2015), s. 497-504 ISSN 0003-813X Institutional support: RVO:67985912 Keywords : metallic plating * voltammetry of microparticles * non-invasive analysis * medieval period * archaeological artefacts Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 1.364, year: 2015

Analysis and modeling of wafer-level process variability in 28 nm FD-SOI using split C-V measurements

Science.gov (United States)

Pradeep, Krishna; Poiroux, Thierry; Scheer, Patrick; Juge, André; Gouget, Gilles; Ghibaudo, Gérard

2018-07-01

This work details the analysis of wafer level global process variability in 28 nm FD-SOI using split C-V measurements. The proposed approach initially evaluates the native on wafer process variability using efficient extraction methods on split C-V measurements. The on-wafer threshold voltage (VT) variability is first studied and modeled using a simple analytical model. Then, a statistical model based on the Leti-UTSOI compact model is proposed to describe the total C-V variability in different bias conditions. This statistical model is finally used to study the contribution of each process parameter to the total C-V variability.

Electrochemical studies and analysis of 1–10 wt% UCl{sub 3} concentrations in molten LiCl–KCl eutectic

Energy Technology Data Exchange (ETDEWEB)

Hoover, Robert O., E-mail: roberthoover@vandals.uidaho.edu [Chemical and Materials Engineering Department and Nuclear Engineering Program, University of Idaho, Idaho Falls, Center for Advanced Energy Studies, 995 University Blvd, Idaho Falls, ID 83401 (United States); Shaltry, Michael R., E-mail: mshaltry@uidaho.edu [Chemical and Materials Engineering Department and Nuclear Engineering Program, University of Idaho, Idaho Falls, Center for Advanced Energy Studies, 995 University Blvd, Idaho Falls, ID 83401 (United States); Martin, Sean, E-mail: Sean.martin@xenuclear.com [Department of Engineering Physics, University of Wisconsin-Madison, 1415 Engineering Drive, Madison, WI 53706 (United States); Sridharan, Kumar, E-mail: kumar@engr.wisc.edu [Department of Engineering Physics, University of Wisconsin-Madison, 1415 Engineering Drive, Madison, WI 53706 (United States); Phongikaroon, Supathorn, E-mail: supathor@uidaho.edu [Chemical and Materials Engineering Department and Nuclear Engineering Program, University of Idaho, Idaho Falls, Center for Advanced Energy Studies, 995 University Blvd, Idaho Falls, ID 83401 (United States)

2014-09-15

Three electrochemical methods – cyclic voltammetry (CV), chronopotentiometry (CP), and anodic stripping voltammetry (ASV) – were applied to solutions of up to 10 wt% UCl{sub 3} in the molten LiCl–KCl eutectic salt at 500 °C to determine electrochemical properties and behaviors and to help provide a scientific basis for the development of an in situ electrochemical probe for determining the concentration of uranium in a used nuclear fuel electrorefiner. Diffusion coefficients of UCl{sub 4} and UCl{sub 3} were calculated to be (6.72 ± 0.360) × 10{sup −6} cm{sup 2}/s and (1.04 ± 0.17) × 10{sup −5} cm{sup 2}/s, respectively. Apparent standard reduction potentials were determined to be (−0.381 ± 0.013) V and (−1.502 ± 0.076) V vs. 5 mol% Ag/AgCl or (−1.448 ± 0.013) V and (−2.568 ± 0.076) V vs. Cl{sub 2}/Cl{sup −} for the U(IV)/U(III) and U(III)/U redox couples, respectively. In comparing this data with supercooled thermodynamic data to determine activity coefficients, the thermodynamic database used was important with resulting activity coefficients ranging from 2.34 × 10{sup −3} to 1.08 × 10{sup −2} for UCl{sub 4} and 4.94 × 10{sup −5} to 4.50 × 10{sup −4} for UCl{sub 3}. Of anodic stripping voltammetry and cyclic voltammetry anodic or cathodic peaks, the CV cathodic peak height divided by square root of scan rate was shown to be the most reliable method of determining UCl{sub 3} concentration in the molten salt.

Anodic Stripping Voltammetry at Nanoelectrodes: Trapping of Mn2+ by Crown Ethers

International Nuclear Information System (INIS)

Danis, Laurence; Gateman, Samantha Michelle; Snowden, Michael Edward; Halalay, Ion C.; Howe, Jane Y.; Mauzeroll, Janine

2015-01-01

The work presented here describes the development and characterization of platinum-mercury hemispherical nanoelectrodes for the spatially resolved quantitative detection of manganese cations. The electrochemical probes were made by electrodeposition of metallic mercury from a mercuric ion solution onto Pt/quartz laser-pulled concentric disk nanoelectrodes (with disk radii ranging from 3 to 500 nm). The nanoelectrodes were characterized by steady-state voltammetry, scanning electrochemical microscopy, environmental scanning electron microscopy, energy-dispersive X-ray spectroscopy and calibrated with respect to the concentration of Mn 2+ ions using anodic stripping voltammetry. The fully characterized probes were employed for the quantitative detection of Mn 2+ . The technique has been used to evaluate the impact of a novel approach for mitigating the undesirable consequences of manganese dissolution in Li-ion batteries

Fox grape cv. Bordô (Vitis labrusca L.) and grapevine cv. Chardonnay (Vitis vinifera L.) cultivated in vitro under different carbohydrates, amino acids and 6-Benzylaminopurine levels

OpenAIRE

Carvalho, Dayse Cristina de; Silva, André Luís Lopes da; Schuck, Mariane Ruzza; Purcino, Marivel; Tanno, Guilherme Nakao; Biasi, Luiz Antonio

2013-01-01

The aim of this work was to study the influence of sucrose and glucose, amino acids and BAP (6-Benzylaminopurine) levels on in vitro shoot regeneration of fox grape cv. Bordô and grapevine cv. Chardonnay. The nodal segments from micropropagated material were used as explants and half-strength MS medium as the basal medium. Sucrose and glucose at 15, 30 and 45 g.L-1 were tested as a carbon source and the supplementation of adenine, asparagine, alanine, glycine, cysteine, glutamine, arginine wa...

Analisis Daya Saing untuk Meningkatkan Kualitas Layanan terhadap Pelanggan dengan Pendekatan CRM di CV. BLITZSPOT

Directory of Open Access Journals (Sweden)

Suryadi Muhammad

2017-04-01

Full Text Available CV. Blitzspot adalah perusahaan yang bergerak di bidang jasa penyediaan layanan internet (internet service provider, yang berkantor pusat di Komplek Padasuka Indah Ruko Blok A-1, Cimahi, Jawa Barat. Berdasarkan hasil wawancara dan hasil observasi pada data transaksi CV. Blitzspot, konsumen CV. Blitzspot yang melakukan transaksi tiap tahunnya selalu berkurang, hal ini dikarenakan konsumen sering membandingkan layanan-layanan yang ditawarkan oleh para pesaing CV. Blitzspot. Bila permasalahan tersebut belum teratasi, konsumen CV. Blitzspot akan menurun tiap tahunnya dan akan selalu berpindah ke pesaing CV. Blitzspot. Direktur Utama CV. Blitzspot ingin menganalisis daya saing untuk menentukan layanan-layanan yang akan diberikan kepada pelanggan CV. Blitzspot dan penentuan strategi untuk mempertahankan konsumen CV. Blitzspot.  Metode Analisis daya saing yang digunakan adalah Model Analisis Berlian Porter dan Metode Pengelompokkan Pelanggan yang digunakan adalah Metode LRFM. Berdasarkan hasil pengujian dan pembahasan yang telah dibuat, maka dapat ditarik kesimpulan bahwa Direktur Utama dapat menganalisis daya saing CV. Blitzspot dengan menggunakan Berlian Porter untuk meningkatkan kualitas layanan terhadap pelanggan CV. Blitzspot.

EARTH, MOON, SUN, AND CV ACCRETION DISKS

International Nuclear Information System (INIS)

Montgomery, M. M.

2009-01-01

Net tidal torque by the secondary on a misaligned accretion disk, like the net tidal torque by the Moon and the Sun on the equatorial bulge of the spinning and tilted Earth, is suggested by others to be a source to retrograde precession in non-magnetic, accreting cataclysmic variable (CV) dwarf novae (DN) systems that show negative superhumps in their light curves. We investigate this idea in this work. We generate a generic theoretical expression for retrograde precession in spinning disks that are misaligned with the orbital plane. Our generic theoretical expression matches that which describes the retrograde precession of Earths' equinoxes. By making appropriate assumptions, we reduce our generic theoretical expression to those generated by others, or to those used by others, to describe retrograde precession in protostellar, protoplanetary, X-ray binary, non-magnetic CV DN, quasar, and black hole systems. We find that spinning, tilted CV DN systems cannot be described by a precessing ring or by a precessing rigid disk. We find that differential rotation and effects on the disk by the accretion stream must be addressed. Our analysis indicates that the best description of a retrogradely precessing spinning, tilted, CV DN accretion disk is a differentially rotating, tilted disk with an attached rotating, tilted ring located near the innermost disk annuli. In agreement with the observations and numerical simulations by others, we find that our numerically simulated CV DN accretion disks retrogradely precess as a unit. Our final, reduced expression for retrograde precession agrees well with our numerical simulation results and with selective observational systems that seem to have main-sequence secondaries. Our results suggest that a major source to retrograde precession is tidal torques like that by the Moon and the Sun on the Earth. In addition, these tidal torques should be common to a variety of systems where one member is spinning and tilted, regardless if

Analisis Strategi Mitigasi Resiko Pada Supply Chain CV Surya Cip Dengan House of Risk Model

OpenAIRE

Pertiwi, Yoana Ellen; Susanty, Aries

2017-01-01

Analysis of Risk Mitigation Strategies on CV Surya CIP's Supply Chain Using House of Risk Model. In the supply chain activities always has the potential of risk, therefore risk management is necessary for handling the risks. At the company that produces plastic molding machine such as CV Surya CIP, in its supply chain activities have a chance to arise risks. The purpose of this study is to identify the various risks that occur in the CV Surya CIP and its causes, severity and determine the ...

Development of pore interconnectivity/morphology in porous silica films investigated by cyclic voltammetry and slow positron annihilation spectroscopy

International Nuclear Information System (INIS)

Tang, Xiuqin; Xiong, Bangyun; Li, Qichao; Mao, Wenfeng; Xiao, Wei; Fang, Pengfei; He, Chunqing

2015-01-01

Highlights: •Porous silica films were studied by cyclic voltammetry and positron annihilation. •Highly interconnected pores were formed in the film fabricated with more CTAB. •Aligned nanochannels were observed in the porous flim prepared with 25 wt.% CTAB. •I − and Ps diffusion in the films was governed by pore interconnectivity/morphology. •Cyclic voltammetry is feasible to explore pore interconnectivity/morphology. -- Abstract: Cyclic voltammetry and positronium (Ps) 3γ-annihilation spectroscopy were applied to investigate pore interconnectivity/morphology of porous silica films fabricated with various loading of cetyltrimethyl ammonium bromide (CTAB). With increasing the ratio of CTAB up to 15 wt.%, the total charge Q, resulted from I − diffusion across the silica films, increased remarkably, indicative of formation of highly interconnected pores in the films prepared with more porogen. However, it decreased dramatically with further loading CTAB of 25 wt.%. Interestingly, 3γ-annihilation fraction I 3γ due to a triplet-state Ps (ortho-positronium, o-Ps) emission from the silica films showed a similar behavior as a function of CTAB loading. The abnormal decrement in Q and I 3γ in the film fabricated with 25 wt.% CTAB was well explained by formation of long nanochannels aligning parallel to the film surface. The results indicated that the total charge Q and Ps 3γ-annihilation fraction were closely associated with I − and Ps diffusion governed by the pore interconnectivity/morphology of the silica films, which made cyclic voltammetry possible to be a feasible tool to characterize pore interconnectivity/morphology of porous thin films

Gamma irradiation studies on Gladiolus cv. White Friendship

International Nuclear Information System (INIS)

Banerji, B.K.; Datta, S.K.; Sharma, S.C.

1994-01-01

Dormant corms of Gladiolus cv. White Friendship were irradiated with 250, 500, 750, 1000 and 1250 Gy of gamma rays. Reduction in survival, plant height, number of leaves and floret, spike length, leaf and corm size and delayed flowering were recorded after irradiation. Morphological abnormalities in foliage and florets and chromosomal aberration during root tip mitosis increased with increase in exposure. Flowering was ceased cent per cent in highest dose of 1250 Gy. LD 50 on survival basis was found in 750 Gy exposure. MV 2 and MV 3 also followed the similar pattern of results as exhibited by MV 1 plants. Pink flower colour mutation was detected in few plants as sectorial chimeric form in MV 2 in treated population. In MV 3 one plant produced spike with lighter pink florets in 750 Gy treatment. This mutant has been isolated in pure form. (author). 10 refs., 2 figs., 2 tabs

Limited geographic distribution of the novel cyclovirus CyCV-VN.

Science.gov (United States)

Le, Van Tan; de Jong, Menno D; Nguyen, Van Kinh; Nguyen, Vu Trung; Taylor, Walter; Wertheim, Heiman F L; van der Ende, Arie; van der Hoek, Lia; Canuti, Marta; Crusat, Martin; Sona, Soeng; Nguyen, Hanh Uyen; Giri, Abhishek; Nguyen, Thi Thuy Chinh Bkrong; Ho, Dang Trung Nghia; Farrar, Jeremy; Bryant, Juliet E; Tran, Tinh Hien; Nguyen, Van Vinh Chau; van Doorn, H Rogier

2014-02-05

A novel cyclovirus, CyCV-VN, was recently identified in cerebrospinal fluid (CSF) from patients with central nervous system (CNS) infections in central and southern Vietnam. To explore the geographic distribution of this novel virus, more than 600 CSF specimens from patients with suspected CNS infections in northern Vietnam, Cambodia, Nepal and The Netherlands were screened for the presence of CyCV-VN but all were negative. Sequence comparison and phylogenetic analysis between CyCV-VN and another novel cyclovirus recently identified in CSF from Malawian patients indicated that these represent distinct cycloviral species, albeit phylogenetically closely related. The data suggest that CyCV-VN has a limited geographic distribution within southern and central Vietnam. Further research is needed to determine the global distribution and diversity of cycloviruses and importantly their possible association with human disease.

Cyclic Voltammetry of Highly Hydrophilic Ions at a Supported Liquid Membrane

Czech Academy of Sciences Publication Activity Database

Ulmeanu, S. M.; Jensen, H.; Samec, Zdeněk; Bouchard, G.; Carrupt, P. A.; Giraut, H. H.

2002-01-01

Roč. 530, 1/2 (2002), s. 10-15 ISSN 0022-0728 R&D Projects: GA AV ČR IAA4040902 Institutional research plan: CEZ:AV0Z4040901 Keywords : liquid-liquid interface * membrane * cyclic voltammetry Subject RIV: CG - Electrochemistry Impact factor: 2.027, year: 2002

Electrochemical studies of quinine in surfactant media using hanging mercury drop electrode: a cyclic voltammetric study.

Science.gov (United States)

Dar, Riyaz Ahmad; Brahman, Pradeep Kumar; Tiwari, Sweety; Pitre, Krishna Sadashiv

2012-10-01

The electrochemical behavior of quinine was investigated by cyclic voltammetry (CV) and square wave voltammetry (SWV) using surfactant. The reduction peak current of quinine increases remarkably in presence of 1% CTAB. Its electrochemical behavior is quasi-reversible in the Britton-Robinson buffers of pH 10.38 by exhibiting the well-defined single cathodic and anodic waves and the ratio of I(p)(a)/I(p)(c) approaching one at the scan rate of 500 mVs(-1). On the basis of CV, SWV and Coulometry, electrochemical reduction mechanism of quinine has been proposed which has shown that protonation occurs on the nitrogen of the quinoline moiety. Linearity was obtained when the peak currents (I(p)) were plotted against concentrations of quinine in the range of 30.0-230.0 ng mL(-1) with a detection limit of 0.132 ng mL(-1) in SWV and 90.0-630.0 ng mL(-1) with a detection limit of 0.238 ng mL(-1) in DPV. Fast and sensitive SWV has been applied for the quantitative analysis of quinine in bark of Cinchona sp. and in soft drinks and a good recovery was obtained. The accuracy and precision of the method are determined and validated statistically. No interferences from other food additives were observed. The relative standard deviation for intraday and interday assay was 0.89 and 0.73% (n=3) respectively. Copyright © 2012 Elsevier B.V. All rights reserved.

A randomized study of the immunogenicity and safety of Japanese encephalitis chimeric virus vaccine (JE-CV) in comparison with SA14-14-2 vaccine in children in the Republic of Korea.

Science.gov (United States)

Kim, Dong Soo; Houillon, Guy; Jang, Gwang Cheon; Cha, Sung-Ho; Choi, Soo-Han; Lee, Jin; Kim, Hwang Min; Kim, Ji Hong; Kang, Jin Han; Kim, Jong-Hyun; Kim, Ki Hwan; Kim, Hee Soo; Bang, Joon; Naimi, Zulaikha; Bosch-Castells, Valérie; Boaz, Mark; Bouckenooghe, Alain

2014-01-01

A new live attenuated Japanese encephalitis chimeric virus vaccine (JE-CV) has been developed based on innovative technology to give protection against JE with an improved immunogenicity and safety profile. In this phase 3, observer-blind study, 274 children aged 12-24 months were randomized 1:1 to receive one dose of JE-CV (Group JE-CV) or the SA14-14-2 vaccine currently used to vaccinate against JE in the Republic of Korea (Group SA14-14-2). JE neutralizing antibody titers were assessed using PRNT50 before and 28 days after vaccination. The primary endpoint of non-inferiority of seroconversion rates on D28 was demonstrated in the Per Protocol analysis set as the difference between Group JE-CV and Group SA14-14-2 was 0.9 percentage points (95% confidence interval [CI]: -2.35; 4.68), which was above the required -10%. Seroconversion and seroprotection rates 28 days after administration of a single vaccine dose were 100% in Group JE-CV and 99.1% in Group SA14-14-2; all children except one (Group SA14-14-2) were seroprotected. Geometric mean titers (GMTs) increased in both groups from D0 to D28; GM of titer ratios were slightly higher in Group JE-CV (182 [95% CI: 131; 251]) than Group SA14-14-2 (116 [95% CI: 85.5, 157]). A single dose of JE-CV was well tolerated and no safety concerns were identified. In conclusion, a single dose of JE-CV or SA14-14-2 vaccine elicited a comparable immune response with a good safety profile. Results obtained in healthy Korean children aged 12-24 months vaccinated with JE-CV are consistent with those obtained in previous studies conducted with JE-CV in toddlers.

Surface characterization by X-ray photoelectron spectroscopy and cyclic voltammetry of products formed during the potentiostatic reduction of chalcopyrite

International Nuclear Information System (INIS)

Nava, Dora; Gonzalez, Ignacio; Leinen, Dietmar; Ramos-Barrado, Jose R.

2008-01-01

Surface characterization of the transient products that precede chalcocite formation during chalcopyrite reduction was carried out. The experimental strategy employed in the present work consisted of the application of different potential pulses (fixed energetic conditions) on the surface of chalcopyrite electrodes in 1.7 M H 2 SO 4 . The chemical products formed at different potential pulses were characterized by cyclic voltammetry (CV) and XPS. Each electrogenerated species presented a specific voltammetric behavior and an XPS spectrum, in which the values of principal photoelectronic peak bond energies for Cu 2p 3/2 , Fe 2p 3/2 and S 2p 3/2 and the atomic concentrations were considered. Several potential intervals could be identified: in 0.115 ≥ E cat ≥ -0.085 V vs. SHE, an intermediate copper sulfide is formed whose composition is between those of chalcopyrite and bornite, such as talnakhite. The reduction of this product occurs slowly, giving bornite at potentials less than -0.085 V. In the applied potential region -0.085 ≥ E cat > -0.185 V, the bornite gradually decomposes causing the incomplete conversion to chalcocite. In the potential interval -0.185 > E cat ≥ -0.285 V, energetic conditions are large enough to allow the immediate decomposition of bornite, forming chalcocite in a more quantitative manner

Study of antioxidant properties of a water-soluble Vitamin E derivative-tocopherol monoglucoside (TMG) by differential pulse voltammetry.

Science.gov (United States)

Korotkova, E I; Avramchik, O A; Kagiya, T V; Karbainov, Y A; Tcherdyntseva, N V

2004-06-17

Study of antioxidant properties of tocopherol monoglucoside (TMG), a water-soluble Vitamin E derivative, by differential pulse voltammetry has been carried out in this work. The pH influence on the antioxidant properties of TMG has been also investigated. It was observed that the antioxidant activity of TMG is greater at 6.90TMG and reactive oxygen species have been considered. Antioxidant activity of some standard antioxidants including Vitamin E was given for comparison. The results indicate that the TMG is an effective antioxidant in neutral solutions. The oxidation potential for TMG at pH 7.31 has been found (E=0.55+/-0.03V versus Ag|AgCl|KCl(sat) electrode). Finally the use of TMG for protection against oxidative stress has been recommended.

Electrocatalysis and kinetics of the direct alcohol fuel cells. DEMS and ac voltammetry studies

Energy Technology Data Exchange (ETDEWEB)

Othman Mostafa, Ehab Mostafa

2013-01-11

For the direct methanol fuel cell (DMFC) operating at low temperature, the main problem that arises at the anode is its poisoning (deactivation) due to the accumulation of the fuel adsorption product (CO{sub ad}) which can only be oxidized at high potentials (> 0.7 V). For low temperature direct ethanol fuel cells (DEFCs), the main problem that arises at the anode, beside its poisoning by ethanol adsorption products (CO{sub ad} and CH{sub x,ad}), is the incomplete ethanol oxidation due to the difficulty of (C-C) bond breaking. In the previous types of fuel cells, a sluggish oxygen reduction reaction (ORR) kinetics was observed at the cathode which results in a large voltage drop. Such behavior is due to strong inhibition of the cathodic ORR, resulting in high overpotentials and therefore, significant deterioration in the energy conversion efficiency of the cell. The slow kinetic behavior stems from the difficulty of (O=O) bond breaking. In order to model the conditions of continuous oxidation/reduction in a fuel cell, the continuous mass transfer to the electrode surface is necessary. Therefore, mass spectrometry and AC voltammetry measurements presented here were done using the thin layer flow through cell. This thesis aims at a determination of the rate constant of single reaction steps during the oxidation of CO, methanol and ethanol at different platinum surfaces. Towards that aim, I investigated the electrocatalytic oxidation and adsorption rate of methanol (chapter 3) and the electrocatalytic oxidation of ethanol (chapter 4) at different Pt surfaces, using DEMS. In chapter 5, the potential dependence of the bulk and adsorbed methanol oxidation reaction rate (presented by the apparent transfer coefficient, {alpha}') and the corresponding Tafel slope of the reaction have been determined under convection conditions using a potential modulation ac voltammetry technique. Finally, as an application of the method presented in chapter 5, my work in chapter 6

Electrochemical Study of Delta-9-Tetrahydrocannabinol by Cyclic Voltammetry Using Screen Printed Electrode, Improvements in Forensic Analysis

Directory of Open Access Journals (Sweden)

Marco Antonio BALBINO

2016-12-01

Full Text Available Rapid screening of seized drugs is a continuing problem for governmental laboratories and customs agents. Recently new and cheaper methods based on electrochemical sensing have been developed for the detection of illicit drugs. Screen printed electrodes are particularly useful in this regard and can provide excellent sensitivity. In this study, a carbon screen printed electrode for the voltammetric analysis of D9-THC was developed. The analysis was performed using cyclic voltammetry with 0.15 mol×L-1 potassium nitrate as a supporting electrolyte. In the analysis, a D9-THC standard solution was added to the surface electrode by a drop coating method. A study of scan rate, time of pre-concentration, and concentration influence parameters showed versatility during the investigation. The high sensitivity, quantitative capability and low limit of detection (1.0 µmol×L-1 demonstrate that this electrochemical method should be an attractive alternative in forensic investigations of seized samples.

VOLTAMMETRY OF AQUEOUS CHLOROAURIC ACID WITH HANGING MERCURY DROP ELECTRODE

Czech Academy of Sciences Publication Activity Database

Korshunov, A.; Josypčuk, Bohdan; Heyrovský, Michael

2011-01-01

Roč. 76, č. 7 (2011), s. 929-936 ISSN 0010-0765 R&D Projects: GA ČR GAP206/11/1638; GA AV ČR IAA400400806; GA MŠk(CZ) LC06063 Institutional research plan: CEZ:AV0Z40400503 Keywords : aqueous chloauric acid * voltammetry * hanging mercury drop electrode Subject RIV: CG - Electrochemistry Impact factor: 1.283, year: 2011

Analytical solutions of the planar cyclic voltammetry process for two soluble species with equal diffusivities and fast electron transfer using the method of eigenfunction expansions

Energy Technology Data Exchange (ETDEWEB)

Samin, Adib; Lahti, Erik; Zhang, Jinsuo, E-mail: zhang.3558@osu.edu [Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, 201 W 19" t" h Avenue, Columbus, Ohio 43210 (United States)

2015-08-15

Cyclic voltammetry is a powerful tool that is used for characterizing electrochemical processes. Models of cyclic voltammetry take into account the mass transport of species and the kinetics at the electrode surface. Analytical solutions of these models are not well-known due to the complexity of the boundary conditions. In this study we present closed form analytical solutions of the planar voltammetry model for two soluble species with fast electron transfer and equal diffusivities using the eigenfunction expansion method. Our solution methodology does not incorporate Laplace transforms and yields good agreement with the numerical solution. This solution method can be extended to cases that are more general and may be useful for benchmarking purposes.

Analytical solutions of the planar cyclic voltammetry process for two soluble species with equal diffusivities and fast electron transfer using the method of eigenfunction expansions

International Nuclear Information System (INIS)

th Avenue, Columbus, Ohio 43210 (United States))" data-affiliation=" (Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, 201 W 19th Avenue, Columbus, Ohio 43210 (United States))" >Samin, Adib; th Avenue, Columbus, Ohio 43210 (United States))" data-affiliation=" (Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, 201 W 19th Avenue, Columbus, Ohio 43210 (United States))" >Lahti, Erik; th Avenue, Columbus, Ohio 43210 (United States))" data-affiliation=" (Nuclear Engineering Program, Department of Mechanical and Aerospace Engineering, The Ohio State University, 201 W 19th Avenue, Columbus, Ohio 43210 (United States))" >Zhang, Jinsuo

2015-01-01

Cyclic voltammetry is a powerful tool that is used for characterizing electrochemical processes. Models of cyclic voltammetry take into account the mass transport of species and the kinetics at the electrode surface. Analytical solutions of these models are not well-known due to the complexity of the boundary conditions. In this study we present closed form analytical solutions of the planar voltammetry model for two soluble species with fast electron transfer and equal diffusivities using the eigenfunction expansion method. Our solution methodology does not incorporate Laplace transforms and yields good agreement with the numerical solution. This solution method can be extended to cases that are more general and may be useful for benchmarking purposes

Cathodic adsorptive stripping voltammetry of an anti-emetic agent Granisetron in pharmaceutical formulation and biological matrix

Directory of Open Access Journals (Sweden)

Rajeev Jain

2012-12-01

Full Text Available Granisetron showed one well-defined reduction peak at Hanging Mercury Drop Electrode (HMDE in the potential range from −1.3 to −1.5 V due to reduction of C=N bond. Solid-phase extraction technique was employed for extraction of Granisetron from spiked human plasma. Granisetron showed peak current enhancement of 4.45% at square-wave voltammetry and 5.33% at cyclic voltammetry as compared with the non stripping techniques. The proposed voltammetric method allowed quantification of Granisetron in pharmaceutical formulation over the target concentration range of 50–200 ng/mL with detection limit 13.63 ng/mL, whereas in human plasma 50–225 ng/mL with detection limit 11.75 ng/mL. Keywords: Granisetron, Human plasma, Solid-phase extraction, Pharmaceutical formulation, Voltammetry, Hanging mercury drop electrode

Structural transformation during Li/Na insertion and theoretical cyclic voltammetry of the δ-NH4V4O10 electrode: a first-principles study.

Science.gov (United States)

Sarkar, Tanmay; Kumar, Parveen; Bharadwaj, Mridula Dixit; Waghmare, Umesh

2016-04-14

A double layer δ-NH4V4O10, due to its high energy storage capacity and excellent rate capability, is a very promising cathode material for Li-ion and Na-ion batteries for large-scale renewable energy storage in transportation and smart grids. While it possesses better stability, and higher ionic and electronic conductivity than the most widely explored V2O5, the mechanisms of its cyclability are yet to be understood. Here, we present a theoretical cyclic voltammetry as a tool based on first-principles calculations, and uncover structural transformations that occur during Li(+)/Na(+) insertion (x) into (Lix/Nax)NH4V4O10. Structural distortions associated with single-phase and multi-phase structural changes during the insertion of Li(+)/Na(+), identified through the analysis of voltage profile and theoretical cyclic voltammetry are in agreement with the reported experimental electrochemical measurements on δ-NH4V4O10. We obtain an insight into its electronic structure with a lower band gap that is responsible for the high rate capability of (Lix/Nax) δ-NH4V4O10. The scheme of theoretical cyclic voltammetry presented here will be useful for addressing issues of cyclability and energy rate in other electrode materials.

Electrochemical study of the tarnish layer of silver deposited on glass

OpenAIRE

Ben Amor , Yasser; Sutter , Eliane; Takenouti , Hisasi; Tribollet , Bernard; Boinet , M.; Faure , R.; Balencie , J.; Durieu , G.

2014-01-01

International audience; Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the tarnished thin layer of silver deposited on glass. Instead of natural tarnishing in air environment, an acceleration of tarnishing process was realized by immersion of Ag covered glass in 10 μM K2S medium. The X-ray photoelectron spectroscopy (XPS) shows that tarnishing product formed on the silver surface consisted of Ag2S and Ag2O. As electrochemical characterizatio...

Electrochemistry of raloxifene on glassy carbon electrode and its determination in pharmaceutical formulations and human plasma.

Science.gov (United States)

Bagheri, Akbar; Hosseini, Hadi

2012-12-01

The electrochemical behavior of raloxifene (RLX) on the surface of a glassy carbon electrode (GCE) has been studied by cyclic voltammetry (CV). The CV studies were performed in various supporting electrolytes, wide range of potential scan rates, and pHs. The results showed an adsorption-controlled and quasi-reversible process for the electrochemical reaction of RLX, and a probable redox mechanism was suggested. Under the optimum conditions, differential pulse voltammetry (DPV) was applied for quantitative determination of the RLX in pharmaceutical formulations. The DPV measurements showed that the anodic peak current of the RLX was linear to its concentration in the range of 0.2-50.0μM with a detection limit of 0.0750μM, relative standard deviation (RSD %) below 3.0%, and a good sensitivity. The proposed method was successfully applied for determination of the RLX in pharmaceutical and human plasma samples with a good selectivity and suitable recovery. Copyright © 2012 Elsevier B.V. All rights reserved.

OpenCV for secret agents

CERN Document Server

Howse, Joseph

2015-01-01

This book is for programmers who want to expand their skills by building fun, smart, and useful systems with OpenCV. The projects are ideal in helping you to think creatively about the uses of computer vision, natural user interfaces, and ubiquitous computers (in your home, car, and hand).

Calibration of ADRET voltage generator type CV102. Program CODAV

International Nuclear Information System (INIS)

Lagarde, Gerard.

1978-07-01

The CODAV programm studied by the Metrology SES/SME laboratory is used for the calibration of ADRET voltage generator type CV.102. A JCAM.10 microcomputer run the measurement cycle and the printout of the results [fr

The draft genome of Corchorus olitorius cv. JRO-524 (Navin

Directory of Open Access Journals (Sweden)

Debabrata Sarkar

2017-06-01

Full Text Available Here, we present the draft genome (377.3 Mbp of Corchorus olitorious cv. JRO-524 (Navin, which is a leading dark jute variety developed from a cross between African (cv. Sudan Green and indigenous (cv. JRO-632 types. We predicted from the draft genome a total of 57,087 protein-coding genes with annotated functions. We identified a large number of 1765 disease resistance-like and defense response genes in the jute genome. The annotated genes showed the highest sequence similarities with that of Theobroma cacao followed by Gossypium raimondii. Seven chromosome-scale genetically anchored pseudomolecules were constructed with a total size of 8.53 Mbp and used for synteny analyses with the cocoa and cotton genomes. Like other plant species, gypsy and copia retrotransposons were the most abundant classes of repeat elements in jute. The raw data of our study are available in SRA database of NCBI with accession number SRX1506532. The genome sequence has been deposited at DDBJ/EMBL/GenBank under the accession LLWS00000000, and the version described in this paper will be the first version (LLWS01000000.

Determination of mobile form contents of Zn, Cd, Pb and Cu in soil extracts by combined stripping voltammetry

International Nuclear Information System (INIS)

Nedeltcheva, T.; Atanassova, M.; Dimitrov, J.; Stanislavova, L.

2005-01-01

The amount of mobile forms of Zn, Pb, Cd and Cu in extracts obtained by treating soil samples with ammonium nitrate were determined by an appropriate combination of anodic and cathodic stripping voltammetry with hanging mercury drop electrode. Every analysis required three mercury drops: on the first one, zinc was determined; on the second, cadmium and lead; on the third, copper was determined. Zinc, lead and cadmium were determined by conventional differential-pulse anodic stripping voltammetry. For copper determination, adsorptive differential-pulse cathodic stripping voltammetry with amalgamation using chloride ions as a complexing agent was applied. The standard deviation of the results was from 1 to 10% depending on the metal content in the sample. Voltammetric results were in good agreement with the AAS analysis. No microwave digestion of soil extracts was necessary

Determination of mobile form contents of Zn, Cd, Pb and Cu in soil extracts by combined stripping voltammetry

Energy Technology Data Exchange (ETDEWEB)

Nedeltcheva, T. [Department of Analytical Chemistry, University of Chemical Technology and Metallurgy, 8 Kl. Ohridsi Blvd., 1756 Sofia (Bulgaria)]. E-mail: nedel@uctm.edu; Atanassova, M. [Department of Analytical Chemistry, University of Chemical Technology and Metallurgy, 8 Kl. Ohridsi Blvd., 1756 Sofia (Bulgaria); Dimitrov, J. [N. Pushkarov Institute of Soil Science and Agroecology, 7 Shosse Bankya St., 1080 Sofia (Bulgaria); Stanislavova, L. [N. Pushkarov Institute of Soil Science and Agroecology, 7 Shosse Bankya St., 1080 Sofia (Bulgaria)

2005-01-10

The amount of mobile forms of Zn, Pb, Cd and Cu in extracts obtained by treating soil samples with ammonium nitrate were determined by an appropriate combination of anodic and cathodic stripping voltammetry with hanging mercury drop electrode. Every analysis required three mercury drops: on the first one, zinc was determined; on the second, cadmium and lead; on the third, copper was determined. Zinc, lead and cadmium were determined by conventional differential-pulse anodic stripping voltammetry. For copper determination, adsorptive differential-pulse cathodic stripping voltammetry with amalgamation using chloride ions as a complexing agent was applied. The standard deviation of the results was from 1 to 10% depending on the metal content in the sample. Voltammetric results were in good agreement with the AAS analysis. No microwave digestion of soil extracts was necessary.

3CV+2: modelo de calidad para la construcción de la vivienda 3CV+2: quality model for dwelling construction

Directory of Open Access Journals (Sweden)

Salvador García Rodríguez

2008-08-01

Full Text Available Este artículo presenta el modelo y los resultados que, desde Junio de 2005, se han alcanzado en el desarrollo del Programa Nacional de Certificación de los Procesos Constructivos de la Vivienda en base al Modelo 3cv+2. El programa se ha desarrollado con base a un convenio entre el Tecnológico de Monterrey y la Cámara Nacional de la Industria de Desarrollo y Promoción de Vivienda. Actualmente se encuentran voluntariamente en el programa 52 empresas inmobiliarias de diferentes estados de la República Mexicana. El modelo de calidad 3cv+2 es una metodología que busca establecer en los niveles operativos de la construcción criterios que permitan reducir la variabilidad del proceso de construcción, y además permita de manera sistemática, y en un proceso de mejora continua, evaluar el desempeño de calidad en proyectos de construcción de vivienda. El modelo 3cv+2 define en su nombre el alcance del mismo, 3 criterios de calidad para la vivienda (insumos, proceso y producto, apoyado por 2 auditorías (+2, la auditoría interna de la propia empresa, mas la auditoría externa hecha por el Tecnológico de Monterrey. El modelo 3cv+2 busca garantizar que los insumos utilizados en la construcción de las viviendas sean de calidad superior, y que los procesos de ejecución posean características de calidad, productividad, eficiencia, racionalización, y estandarización; de tal manera que insumos y productos sean de alto valor agregado, y garanticen la calidad especificada en las etapas parciales y en la vivienda terminada.This paper presents the model and the results that have been achieved during the development of the National Quality Certification Program based on the model 3cv +2 from June 2005. This program has been developed based on an agreement between the Monterrey Tech and the National Chamber of Housing Industry. Nowadays, the program has 52 voluntary real estate companies from different states of Mexico. The 3cv+2 quality model is a

Thin-layer electrochemistry of ferrocenylbenzene derivatives: Intramolecular electronic communication

International Nuclear Information System (INIS)

Wang, Michael C.P.; Li Yunchao; Merbouh, Nabyl; Yu, Hua-Zhong

2008-01-01

Three arylferrocene derivatives, ferrocenylbenzene (MFcB), 1,3-diferrocenylbenzene (DFcB), and 1,3,5-triferrocenylbenzene (TFcB), were prepared and their redox properties systematically explored by thin-layer cyclic voltammetry (CV) and differential-pulse voltammetry (DPV). In contrast to conventional CV measurements that produced only a single pair of redox waves for all three compounds, the thin-layer technique discriminated between the multistep electron-transfer processes of DFcB and TFcB. In particular, two and three pairs of symmetric peaks were observed, respectively, when CV curves were recorded at a graphite electrode coated with a DFcB-containing and a TFcB-containing thin film of nitrobenzene and immersed in aqueous sodium perchlorate solution. These results demonstrate that the ferrocenyl moieties attached to the meta-positions of a benzene ring communicate electronically with each other, as a result of their distinct face-to-face orientations

Initial stages of Pt(111) electrooxidation: dynamic and structural studies by surface X-ray diffraction

International Nuclear Information System (INIS)

Drnec, Jakub; Ruge, Martin; Reikowski, Finn; Rahn, Björn; Carlà, Francesco; Felici, Roberto; Stettner, Jochim; Magnussen, Olaf M.; Harrington, David A.

2017-01-01

In-situ surface X-ray diffraction is used to characterize the surface oxides on a Pt(111) surface in 0.1 M HClO 4 . Detailed analysis at two potentials confirms that the surface restructuring in the initial oxidation stages is consistent with a place exchange process between Pt and O atoms, and the exchanged Pt atoms are located above their original positions in the Pt(111) lattice. The (1,1,1.5) reflection is used to dynamically study the surface during cyclic voltammetry. The restructuring associated with the place exchange initiates with the CV peak at 1.05 V, even though multiple cycles to 1.17 V lead to no changes in the CV. The restructuring is reversible below a critical coverage of place exchanged Pt atoms, which we estimate to be between 0.07 and 0.15 ML. Extensive cycling to potentials higher or equal to 1.17 V leads to progressive disordering of the surface.

Electrochemical studies of biocatalytic anode of sulfonated graphene/ferritin/glucose oxidase layer-by-layer biocomposite films for mediated electron transfer.

Science.gov (United States)

Inamuddin; Haque, Sufia Ul; Naushad, Mu

2016-06-01

In this study, a bioanode was developed by using layer-by-layer (LBL) assembly of sulfonated graphene (SG)/ferritin (Frt)/glucose oxidase (GOx). The SG/Frt biocomposite was used as an electron transfer elevator and mediator, respectively. Glucose oxidase (GOx) from Aspergillus niger was applied as a glucose oxidation biocatalyst. The electrocatalytic oxidation of glucose using GOx modified electrode increases with an increase in the concentration of glucose in the range of 10-50mM. The electrochemical measurements of the electrode was carried out by using cyclic voltammetry (CV) at different scan rates (20-100mVs(-1)) in 30mM of glucose solution prepared in 0.3M potassium ferrocyanide (K4Fe(CN)6) and linear sweep voltammetry (LSV). A saturation current density of 50±2mAcm(-2) at a scan rate of 100mVs(-1) for the oxidation of 30Mm glucose is achieved. Copyright © 2016 Elsevier Inc. All rights reserved.

Functionalized-graphene modified graphite electrode for the selective determination of dopamine in presence of uric acid and ascorbic acid.

Science.gov (United States)

Mallesha, Malledevaru; Manjunatha, Revanasiddappa; Nethravathi, C; Suresh, Gurukar Shivappa; Rajamathi, Michael; Melo, Jose Savio; Venkatesha, Thimmappa Venkatarangaiah

2011-06-01

Graphene is chemically synthesized by solvothermal reduction of colloidal dispersions of graphite oxide. Graphite electrode is modified with functionalized-graphene for electrochemical applications. Electrochemical characterization of functionalized-graphene modified graphite electrode (FGGE) is carried out by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The behavior of FGGE towards ascorbic acid (AA), dopamine (DA) and uric acid (UA) has been investigated by CV, differential pulse voltammetry (DPV) and chronoamperommetry (CA). The FGGE showed excellent catalytic activity towards electrochemical oxidation of AA, DA and UA compared to that of the bare graphite electrode. The electrochemical oxidation signals of AA, DA and UA are well separated into three distinct peaks with peak potential separation of 193mv, 172mv and 264mV between AA-DA, DA-UA and AA-UA respectively in CV studies and the corresponding peak potential separations in DPV mode are 204mv, 141mv and 345mv. The FGGE is successfully used for the simultaneous detection of AA, DA and UA in their ternary mixture and DA in serum and pharmaceutical samples. The excellent electrocatalytic behavior of FGGE may lead to new applications in electrochemical analysis. Copyright © 2011 Elsevier B.V. All rights reserved.

Conductive polymer/reduced graphene oxide/Au nano particles as efficient composite materials in electrochemical supercapacitors

Science.gov (United States)

Shabani Shayeh, J.; Ehsani, A.; Ganjali, M. R.; Norouzi, P.; Jaleh, B.

2015-10-01

Polyaniline/reduced graphene oxide/Au nano particles (PANI/rGO/AuNPs) as a hybrid supercapacitor were deposited on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) method as ternary composites and their electrochemical performance was evaluated in acidic medium. Scanning electron micrographs clearly revealed the formation of nanocomposites on the surface of the working electrode. Scanning electron micrographs (SEM) clearly revealed the formation of nanocomposites on the surface of working electrode. Different electrochemical methods including galvanostatic charge-discharge (CD) experiments, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were carried out in order to investigate the applicability of the system as a supercapacitor. Based on the cyclic voltammogram results obtained, PANI/rGO/AuNPs gave higher specific capacitance, power and energy values than PANI at a current density of 1 mA cm-2. Specific capacitance (SC) of PANI and PANI/rGO/AuNPs electrodes calculated using CV method are 190 and 303 F g-1, respectively. The present study introduces new nanocomposite materials for electrochemical redox capacitors with advantages including long life cycle and stability due to synergistic effects of each component.

Biofuels from the Fresh Water Microalgae Chlorella vulgaris (FWM-CV for Diesel Engines

Directory of Open Access Journals (Sweden)

Saddam H. Al-lwayzy

2014-03-01

Full Text Available This work aims to investigate biofuels for diesel engines produced on a lab-scale from the fresh water microalgae Chlorella vulgaris (FWM-CV. The impact of growing conditions on the properties of biodiesel produced from FWM-CV was evaluated. The properties of FWM-CV biodiesel were found to be within the ASTM standards for biodiesel. Due to the limited amount of biodiesel produced on the lab-scale, the biomass of dry cells of FWM-CV was used to yield emulsified water fuel. The preparation of emulsion fuel with and without FWM-CV cells was conducted using ultrasound to overcome the problems of large size microalgae colonies and to form homogenized emulsions. The emulsified water fuels, prepared using ultrasound, were found to be stable and the size of FWM-CV colonies were effectively reduced to pass through the engine nozzle safely. Engine tests at 3670 rpm were conducted using three fuels: cottonseed biodiesel CS-B100, emulsified cottonseed biodiesel water fuel, water and emulsifier (CS-E20 and emulsified water containing FWM-CV cells CS-ME20. The results showed that the brake specific fuel consumption (BSFC was increased by about 41% when the engine was fueled with emulsified water fuels compared to CS-B100. The engine power, exhaust gas temperature, NOx and CO2 were significantly lower than that produced by CS-B100. The CS-ME20 produced higher power than CS-E20 due to the heating value improvement as a result of adding FWM-CV cells to the fuel.

Organisation des travaux ST-CV

CERN Document Server

Martel, C; CERN. Geneva. ST Division

2003-01-01

Débutée il y a deux ans, la phase de construction des installations de refroidissement du LHC a atteint en 2003 son apogée. De nombreux autres projets sont également gérés par le groupe dans divers secteurs du laboratoire. La spécificité du groupe est de réaliser des installations complexes impliquant des spécificités diverses telles qu’aéraulique, hydraulique, électrique, etc. Pour faire face à ces demandes la section travaux du groupe ST CV a adopté une structure capable de réaliser ces divers projets avec un minimum de personnel. La première partie de ce document décrit l’organisation de la section travaux ST CV. Dans une deuxième partie, les auteurs dressent un état des lieux des chantiers par projet en décrivant plus particulièrement les activités dans les domaines du traitement d’air et de refroidissement par eau.

Corrosion of Cu-xZn alloys in slightly alkaline chloride solutions studied by stripping voltammetry and microanalysis.

Science.gov (United States)

Milosev, I; Minović, A

2001-01-01

The mechanism of corrosion of Cu-xZn alloys (x = 10-40 wt %) in slightly alkaline chloride solutions was investigated by analysing solid reaction products by energy dispersive X-ray analysis (EDS) and dissolved reaction products by differential anodic pulse stripping (DAPS) voltammetry. The corrosion process was studied under open circuit and under potentiostatic conditions at selected potentials. Pure metals were studied comparatively so that an interacting effect of particular metal components in the alloy could be determined. All four Cu-xZn alloys show an improved behaviour compared to pure metals. Under open-circuit condition both components dissolve simultaneously in the solution. With increasing immersion time the preferential, dissolution of zinc in the solution becomes pronounced. It is the highest for Cu-10Zn and the lowest for Cu-30Zn alloy. Under potentiostatic control the dissolution mechanism depends on the electrode potential and changes from exclusive dissolution of zinc to simultaneous dissolution of both components with preferential dissolution of zinc. The latter decreases, as the electrode potential becomes more positive.

Analisis Pengaruh Kemampuan, Usaha dan Dukungan Perusahaan terhadap Kinerja Karyawan pada CV Sandang Gloria Konveksindo

OpenAIRE

Logahan, Jerry; Sari, Synthia Atas; Marisa, Dian

2012-01-01

Clothing Konveksindo CV Gloria is a trading company engaged in the sale of products and clothing items. Therefore, the performance of employees is very important in achieving that goal. The purpose of this study was to analyze the influence of ability, effort, and support the company towards the employee's performance CV Gloria Konveksindo Clothing. The method of analysis used in this study is descriptive, Pearson Regression, and Multiple Regression. Data obtained from the appraisal of employ...

Thermal stability of oils added with avocado (Persea americana cv. Hass) or olive (Olea europaea cv. Arbequina) leaf extracts during the French potatoes frying.

Science.gov (United States)

Jiménez, Paula; García, Paula; Bustamante, Andrés; Barriga, Andrés; Robert, Paz

2017-04-15

Effect of the addition of avocado (Persea americana cv. Hass) or olive (Olea europaea cv. Arbequina) hydroalcoholic leaf extracts (AHE and OHE, respectively) on thermal stability of canola oil (CO) and high oleic sunflower oil (HOSO) during French potatoes frying at 180°C was studied. The extracts were characterized by the total phenolic content, phenol chromatographic profiles and antioxidant activity. B-type trimer procyanidins were the major phenolic compounds identified in AHE. OHE showed higher phenol content, antioxidant activity regarding AHE. CO+OHE and HOSO+OHE decreased the formation of polar compounds and showed an anti-polymeric effect with respect to oils without extracts, whereas AHE extract showed a prooxidant effect on HOSO. Therefore, OHE showed an antioxidant effect on HOSO and CO under the studied conditions. In addition, all systems (CO+AHE, HOSO+AHE, CO+OHE and HOSO+OHE) increased the retention of tocopherols. These results demonstrate the potential utility of OHE as natural antioxidant for oils. Copyright © 2016 Elsevier Ltd. All rights reserved.

Determination of propylthiouracil in pharmaceuticals by differential pulse voltammetry using a cathodically pretreated boron-doped diamond electrode

Energy Technology Data Exchange (ETDEWEB)

Sartori, Elen Romao [Universidade Estadual de Londrina, PR (Brazil). Dept. de Quimica; Trench, Aline Barrios; Rocha-Filho, Romeu C.; Fatibello-Filho, Orlando, E-mail: bello@ufscar.br [Universidade Federal de Sao Carlos (UFSCAR), SP (Brazil). Dept. de Quimica

2013-09-15

A simple procedure is described for the determination of propylthiouracil (PTU) by differential pulse voltammetry (DPV) using a cathodically pretreated boron-doped diamond (BDD) electrode. Cyclic voltammetry studies indicate that the oxidation of PTU is irreversible at a peak potential of 1.42 V (vs. Ag/AgCl (3.0 mol L{sup -1} KCl)) in a Britton-Robinson (BR) buffer solution (pH 2.0). Under optimized conditions, the obtained analytical curve was linear (r = 0.9985) for the PTU concentration range of 1.0 to 29.1 {mu}mol L{sup -1} in a BR buffer solution (pH 2.0), with a detection limit of 0.90 {mu}mol L{sup -1}. The proposed method was successfully applied in the determination of PTU in pharmaceutical samples, with results in agreement at a 95% confidence level with those obtained using an official titration method. (author)

Voltammetry of uranyl chloride in the LiCl - KCl eutectic; Voltammetrie du chlorure d'uranyle dans l'eutectique LiCl - KC1

Energy Technology Data Exchange (ETDEWEB)

Fondanaiche, J C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1965-07-01

Spent UO{sub 2} - PuO{sub 2} fuels can be reprocessed in a molten salt media. Uranium dioxide can easily be dissolved as UO{sub 2}Cl{sub 2} in a molten salt bath using chlorine gas. A study of quantitative analysis of an uranyl chloride solution in the LiCl-KCl eutectic at 400 C has been performed here using voltammetry (a large area-graphite indicator electrode has been employed). The precision which is obtained is around 6 per cent for concentrations below 10{sup -2} M. Precision decreases slightly for more concentrated solutions. The study of polarization curves allowed to give a reduction mechanism for the UO{sub 2}{sup ++} ion. For dilute solutions, this reduction proceeds through the UO{sub 2}{sup +} ion. But interpretation of current-potential curves is made difficult by the dismutation reaction of the UO{sub 2} ion and by the fact that the surface of the indicator electrode is not renewed. (author) [French] Le traitement des combustibles a base d'oxydes (UO{sub 2} - PUO{sub 2}) peut etre effectue au moyen des sels fondus. Le bioxyde d'uranium passe aisement en solution sous forme de UO{sub 2}Cl{sub 2} dans un bain de sels fondus par action du chlore. Nous avons etudie ici l'analyse quantitative d'une solution de chlorure d'uranyle dans l'eutectique LiCl - KCl a 400 C par voltammetrie (electrode indicatrice de graphite d'assez grande surface). La precision est d'environ 6 pour cent pour les concentrations inferieures a 10{sup -2} M; elle est legerement moins bonne pour les solutions plus concentrees. L'examen des courbes de polarisation a permis de donner un mecanisme de reduction de l'ion UO{sub 2}: pour les solutions diluees, cette reduction se fait par l'intermediaire de l'ion UO{sub 2}{sup +}. Mais l'interpretation des courbes intensite-potentiel est rendue delicate par la reaction de dismutation de l'ion UO{sub 2}{sup +} et par le fait que la surface de l'electrode indicatrice n'est pas renouvelee. (auteur)

FORMULASI STRATEGI PENINGKATAN PRODUKSI DOMBA CV MITRA TANI FARM, CIAMPEA, BOGOR

Directory of Open Access Journals (Sweden)

Amalia Sholehana

2014-04-01

Full Text Available ABSTRACTThis research was conducted to formulate to increase the sheep production at CV Mitra Tani Farm (CV MT Farm, Ciampea, Bogor. The research was conducted using descriptive analysis by analyzing the problem experienced by CV. MitraTani Farm. Primary data and secondary data were gathered at this research. The research was also conducted using several analytical methods such as value chain mapping, internal factor evaluation (IFE and external factor evaluation (EFE matrix, SWOT and quantitative strategic planning matrix (QSPM. Based on the value chain analysis, the current production of sheep at CV MT farm is highly depending on the supply from its partners and internal farmers. According to the IFE and EFE results, the differences of each weighted values were respectively 2,120 and 0,686 so the position of the company in the SWOT matrix was situated at Quadrant I. Therefore the company needs to use a growth strategy. The QSPM sequenced the strategy priority as follow (1 increasing the number of lambs, (2 developing the management, (3 strengthening the capital and ownership, (4 improving the quality through technology. The result of the gross profit margin calculation, if the sheep‘s selling is increased up to 1000 sheep per month then the possible annual profit that can be earned by CV MT farm is 40,34% of the total production.Keywords: MT Farm, sheep production, strategies, SWOT, QSPM, gross profit marginABSTRAKPenelitian ini dilakukan untuk memformulasikan strategi peningkatan produksi domba di CV Mitra Tani Farm (CV MT Farm, Ciampea, Bogor. Pendekatan penelitian yang diterapkan adalah analisis deskriptif yang dilakukan dengan mempelajari permasalahan dari objek yang diteliti. Data yang dikumpulkan dalam penelitian ini adalah data primer dan data sekunder. Penelitian dilakukan menggunakan alat analisis berupa pemetaan rantai nilai,  matriks IFE (Internal Factor Evaluation dan EFE (External Factor Evaluation, SWOT, dan QSPM (Quantitative

A flow cell for transient voltammetry and in situ grazing incidence X-ray diffraction characterization of electrocrystallized cadmium(II) tetracyanoquinodimethane

Energy Technology Data Exchange (ETDEWEB)

Veder, Jean-Pierre [Nanochemistry Research Institute, Department of Chemistry, Curtin University, GPO Box U1987, Perth, Western Australia 6845 (Australia); Nafady, Ayman [School of Chemistry, Monash University, Clayton, Victoria 3800 (Australia); Clarke, Graeme [Nanochemistry Research Institute, Department of Chemistry, Curtin University, GPO Box U1987, Perth, Western Australia 6845 (Australia); Williams, Ross P. [Centre for Materials Research, Department of Imaging and Applied Physics, Curtin University, GPO Box U1987, Perth, Western Australia 6845 (Australia); De Marco, Roland, E-mail: r.demarco@curtin.edu.a [Nanochemistry Research Institute, Department of Chemistry, Curtin University, GPO Box U1987, Perth, Western Australia 6845 (Australia); Bond, Alan M. [School of Chemistry, Monash University, Clayton, Victoria 3800 (Australia)

2011-01-01

An easy to fabricate and versatile cell that can be used with a variety of electrochemical techniques, also meeting the stringent requirement for undertaking cyclic voltammetry under transient conditions in in situ electrocrystallization studies and total external reflection X-ray analysis, has been developed. Application is demonstrated through an in situ synchrotron radiation-grazing incidence X-ray diffraction (SR-GIXRD) characterization of electrocrystallized cadmium (II)-tetracyanoquinodimethane material, Cd(TCNQ){sub 2}, from acetonitrile (0.1 mol dm{sup -3} [NBu{sub 4}][PF{sub 6}]). Importantly, this versatile cell design makes SR-GIXRD suitable for almost any combination of total external reflection X-ray analysis (e.g., GIXRF and GIXRD) and electrochemical perturbation, also allowing its application in acidic, basic, aqueous, non-aqueous, low and high flow pressure conditions. Nevertheless, the cell design separates the functions of transient voltammetry and SR-GIXRD measurements, viz., voltammetry is performed at high flow rates with a substantially distended window to minimize the IR (Ohmic) drop of the electrolyte, while SR-GIXRD is undertaken using stop-flow conditions with a very thin layer of electrolyte to minimize X-ray absorption and scattering by the solution.

Cathodic Stripping Voltammetry of Cysteine Using Silver and Copper Solid Amalgam Electrodes

Czech Academy of Sciences Publication Activity Database

Josypčuk, Bohdan; Novotný, Ladislav

2002-01-01

Roč. 56, č. 5 (2002), s. 971-976 ISSN 0039-9140 R&D Projects: GA ČR GV204/97/K084 Institutional research plan: CEZ:AV0Z4040901 Keywords : silver or copper solid amalgam electrode * cysteine * voltammetry Subject RIV: CG - Electrochemistry Impact factor: 2.054, year: 2002

Wyoming CV Pilot Traveler Information Message Sample

Data.gov (United States)

Department of Transportation — This dataset contains a sample of the sanitized Traveler Information Messages (TIM) being generated by the Wyoming Connected Vehicle (CV) Pilot. The full set of TIMs...

Desempenho de seis gramíneas solteiras ou consorciadas com o Stylosanthes guianensis cv. Mineirão e eucalipto em sistema silvipastoril Performance of six tropical grasses alone or associated with Stylosanthes guianensis cv. Mineirão and eucalypt in silvopastoral system

Directory of Open Access Journals (Sweden)

Carlos Mauricio Soares de Andrade

2003-12-01

Full Text Available Conduziu-se este estudo na região dos Cerrados de Minas Gerais, visando avaliar o desempenho de seis gramíneas forrageiras (Brachiaria brizantha cv. Marandu, B. brizantha cv. MG-4, B. decumbens cv. Basilisk, Panicum maximum cv. Mombaça, Melinis minutiflora e Hyparrhenia rufa, consorciadas ou não com a leguminosa Stylosanthes guianensis cv. Mineirão e Eucalyptus sp., em um sistema silvipastoril. As forrageiras foram estabelecidas em parcelas medindo 12 x 10 m, nas entrelinhas do eucalipto, em um delineamento experimental de blocos ao acaso, com três repetições, e avaliadas quanto ao grau de cobertura do solo, % de leguminosa e disponibilidade de matéria seca total no sub-bosque, um ano após o estabelecimento, submetidas a pastejos de curta duração. Após dois ciclos de pastejo, houve redução da proporção da leguminosa no consórcio com todas as gramíneas, sendo mais evidente com as mais agressivas (B. brizantha cv. Marandu e B. decumbens, onde ela quase desapareceu. Entretanto, a presença do estilosantes Mineirão favoreceu a produtividade do sub-bosque, quando consorciado com as demais gramíneas. O melhor desempenho produtivo foi obtido pelas gramíneas B. brizantha cv. Marandu, B. decumbens e P. maximum cv. Mombaça; a última principalmente quando consorciada com o estilosantes Mineirão.A study was conducted in the Brazilian Cerrados to evaluate the performance of six tropical forage grasses (Brachiaria brizantha cv. Marandu, B. brizantha cv. MG-4, B. decumbens cv. Basilisk, Panicum maximum cv. Mombaça, Melinis minutiflora and Hyparrhenia rufa, associated or not with the tropical forage legume Stylosanthes guianensis cv. Mineirão, in a silvopastoral system with a clone of Eucalyptus sp. The forages were established in plots of 12 x 10 m, in the interrows of eucalypts, in a randomized block design with three replications. Ground cover, proportion of the legume and total dry matter availability in the understorey were

Isolation and characterization of a virus (CvV-BW1 that infects symbiotic algae of Paramecium bursaria in Lake Biwa, Japan

Directory of Open Access Journals (Sweden)

Kasahara Masahiro

2010-09-01

Full Text Available Abstract Background We performed an environmental study of viruses infecting the symbiotic single-celled algae of Paramecium bursaria (Paramecium bursaria Chlorella virus, PBCV in Lake Biwa, the largest lake in Japan. The viruses detected were all Chlorella variabilis virus (CvV = NC64A virus. One of them, designated CvV-BW1, was subjected to further characterization. Results CvV-BW1 formed small plaques and had a linear DNA genome of 370 kb, as judged by pulsed-field gel electrophoresis. Restriction analysis indicated that CvV-BW1 DNA belongs to group H, one of the most resistant groups among CvV DNAs. Based on a phylogenetic tree constructed using the dnapol gene, CvV was classified into two clades, A and B. CvV-BW1 belonged to clade B, in contrast to all previously identified virus strains of group H that belonged to clade A. Conclusions We conclude that CvV-BW1 composes a distinct species within C. variabilis virus.

A study on self-incompatibility and its physiological causes in mango (Mangifera indica L.) Cv. Dashehari

International Nuclear Information System (INIS)

Pandey, R.M.; Singh, R.N.; Rathore, D.S.

1974-01-01

In studies on the physiological causes of self-incompatibility in mango (Mangifera indica L.) cv. Dashehari, both self and cross-pollinated fruitlets were analysed for auxin-like substances at different states of their growth. It was found that cross-pollinated fruitlets act as a stronger physiological sink as compared to self-pollinated ones. Activity measurement and autoradiography of leaves and fruitlets at different stages of their growth indicated that the mobility of 32 P was more towards cross-pollinated fruitlets than that of self-pollinated ones. (author)

Electroacupuncture stimulation at CV4 prevents ovariectomy-induced osteoporosis in rats via Wnt-β-catenin signaling.

Science.gov (United States)

Fan, Huailing; Ji, Feng; Lin, Ying; Zhang, Mulan; Qin, Wei; Zhou, Qi; Wu, Qiang

2016-03-01

The present study aimed to investigate the effect of electroacupuncture stimulation at CV4 (also termed Guanyuan) on femoral osteocalcin also termed bone gla protein (BGP), alkaline phosphatase (ALP), bone mineral density (BMD) and biomechanics, as well as the Wnt‑β‑catenin signaling pathway in rats with postmenopausal osteoporosis. Female Sprague‑Dawley rats (4.5‑months old) were randomly divided into sham, Ovx, CV4 and mock groups (n=10/group). With the exception of those in the sham group, the rats were ovariectomized to induce postmenopausal osteoporosis. The rats in the CV4 and mock groups were given electroacupuncture at CV4 and non‑acupoint, respectively. The rats in the Ovx model and sham groups underwent identical fixing procedures, but did not undergo electroacupuncture. Following treatment, hematoxylin and eosin staining was used to observe morphological changes in the left femoral trabecular bone, and a three‑point‑bending test was used to analyze femur biomechanics and determine the BMD. In addition, an enzyme‑linked immunosorbent assay was used to measure the serum levels of ALP/BGP and reverse transcription‑quantitative polymerase chain reaction was used detect the expression levels of Wnt3a, β‑catenin and Runx2. In the present study, it was demonstrated that electroacupuncture at CV4 significantly improved the osteoporotic morphological changes that occurred in the ovariectomized rats, increased serum ALP and BGP levels, enhanced the maximum and fracture loads, increased BMD (Pelectroacupuncture stimulation at CV4 affected bone formation and promoted bone metabolism in rats with postmenopausal osteoporosis, possibly by activating the Wnt‑β‑catenin signaling pathway.

Isotopic coherence of refractory inclusions from CV and CK meteorites: Evidence from multiple isotope systems

Science.gov (United States)

Shollenberger, Quinn R.; Borg, Lars E.; Render, Jan; Ebert, Samuel; Bischoff, Addi; Russell, Sara S.; Brennecka, Gregory A.

2018-05-01

Calcium-aluminum-rich inclusions (CAIs) are the oldest dated materials in the Solar System and numerous previous studies have revealed nucleosynthetic anomalies relative to terrestrial rock standards in many isotopic systems. However, most of the isotopic data from CAIs has been limited to the Allende meteorite and a handful of other CV3 chondrites. To better constrain the isotopic composition of the CAI-forming region, we report the first Sr, Mo, Ba, Nd, and Sm isotopic compositions of two CAIs hosted in the CK3 desert meteorites NWA 4964 and NWA 6254 along with two CAIs from the CV3 desert meteorites NWA 6619 and NWA 6991. After consideration of neutron capture processes and the effects of hot-desert weathering, the Sr, Mo, Ba, Nd, and Sm stable isotopic compositions of the samples show clearly resolvable nucleosynthetic anomalies that are in agreement with previous results from Allende and other CV meteorites. The extent of neutron capture, as manifested by shifts in the observed 149Sm-150Sm isotopic composition of the CAIs is used to estimate the neutron fluence experienced by some of these samples and ranges from 8.40 × 1013 to 2.11 × 1015 n/cm2. Overall, regardless of CAI type or host meteorite, CAIs from CV and CK chondrites have similar nucleosynthetic anomalies within analytical uncertainty. We suggest the region that CV and CK CAIs formed was largely uniform with respect to Sr, Mo, Ba, Nd, and Sm isotopes when CAIs condensed and that CAIs hosted in CV and CK meteorites are derived from the same isotopic reservoir.

Immunogenicity and safety of the 10-valent pneumococcal nontypeable Haemophilus influenzae protein D conjugate vaccine (PHiD-CV) co-administered with DTPa vaccine in Japanese children: A randomized, controlled study.

Science.gov (United States)

Iwata, Satoshi; Kawamura, Naohisa; Kuroki, Haruo; Tokoeda, Yasunobu; Miyazu, Mitsunobu; Iwai, Asayuki; Oishi, Tomohiro; Sato, Tomohide; Suyama, Akari; François, Nancy; Shafi, Fakrudeen; Ruiz-Guiñazú, Javier; Borys, Dorota

2015-01-01

This phase III, randomized, open-label, multicenter study (NCT01027845) conducted in Japan assessed the immunogenicity, safety, and reactogenicity of 10-valent pneumococcal nontypeable Haemophilus influenzae protein D conjugate vaccine (PHiD-CV, given intramuscularly) co-administered with diphtheria-tetanus-acellular pertussis vaccine (DTPa, given subcutaneously). Infants (N=360 ) were randomized (2:1) to receive either PHiD-CV and DTPa (PHiD-CV group) or DTPa alone (control group) as 3-dose primary vaccination (3-4-5 months of age) and booster vaccination (17-19 months of age). Immune responses were measured before and one month after primary/booster vaccination and adverse events (AEs) were recorded. Post-primary immune responses were non-inferior to those in pivotal/efficacy European or Latin American pneumococcal protein D-conjugate vaccine studies. For each PHiD-CV serotype, at least 92.6% of infants post-primary vaccination and at least 97.7% of children post-booster had pneumococcal antibody concentrations ≥0.2 μg/ml, and at least 95.4% post-primary and at least 98.1% post-booster had opsonophagocytic activity (OPA) titers ≥8 . Geometric mean antibody concentrations and OPA titers (except OPA titer for 6B) were higher post-booster than post-priming for each serotype. All PHiD-CV-vaccinated children had anti-protein D antibody concentrations ≥100 EL.U/ml one month post-primary/booster vaccination and all were seroprotected/seropositive against each DTPa antigen. Redness and irritability were the most common solicited AEs in both groups. Incidences of unsolicited AEs were comparable between groups. Serious AEs were reported for 47 children (28 in PHiD-CV group); none were assessed as vaccine-related. In conclusion, PHiD-CV induced robust immune responses and was well tolerated when co-administered with DTPa in a 3-dose priming plus booster regimen to Japanese children.

Sonochemical synthesis of terbium tungstate for developing high power supercapacitors with enhanced energy densities.

Science.gov (United States)

Sobhani-Nasab, Ali; Rahimi-Nasrabadi, Mehdi; Naderi, Hamid Reza; Pourmohamadian, Vafa; Ahmadi, Farhad; Ganjali, Mohammad Reza; Ehrlich, Hermann

2018-07-01

Sonochemically prepared nanoparticles of terbium tungstate (TWNPs) were evaluated through scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy, and the optimal products were further characterized in terms of their electrochemical properties using conventional and continuous cyclic voltammetry (CV, and CCV), galvanostatic charge/discharge technique, and electrochemical impedance spectroscopy (EIS). The CV studies indicated the TWNPs to have specific capacitance (SC) values of 336 and 205 F g -1 at 1 and 200 mV s -1 , and galvanostatic charge-discharge tests revealed the SC of the TWNP-based electrodes to be 300 F g -1 at 1 Ag -1 . Also continuous cyclic voltammetry evaluations proved the sample as having a capacitance retention value of 95.3% after applying 4000 potential cycles. In the light of the results TWNPs were concluded as favorable electrode materials for use in hybrid vehicle systems. Copyright © 2018 Elsevier B.V. All rights reserved.

Graphene–platinum nanocomposite as a sensitive and selective voltammetric sensor for trace level arsenic quantification

Directory of Open Access Journals (Sweden)

R. Kempegowda

2014-01-01

Full Text Available A simple protocol for the chemical modification of graphene with platinum nanoparticles and its subsequent electroanalytical application toward sensitive and selective determination of arsenic has been described. Chemical modification was carried out by the simultaneous and sequential chemical reduction of graphene oxide and hexachloroplatinic acid in the presence of ethylene glycol as a mild reducing agent. The synthesized graphene–platinum nanocomposite (Gr–nPt has been characterized through infrared spectroscopy, x-ray diffraction study, field emission scanning electron microscopy and cyclic voltammetry (CV techniques. CV and square-wave anodic stripping voltammetry have been used to quantify arsenic. The proposed nanostructure showed linearity in the concentration range 10–100 nM with a detection limit of 1.1 nM. The proposed sensor has been successfully applied to measure trace levels of arsenic present in natural sample matrices like borewell water, polluted lake water, agricultural soil, tomato and spinach leaves.

Khatyrka, a new CV3 find from the Koryak Mountains, Eastern Russia

Science.gov (United States)

MacPherson, Glenn J.; Andronicos, Christopher L.; Bindi, Luca; Distler, Vadim V.; Eddy, Michael P.; Eiler, John M.; Guan, Yunbin; Hollister, Lincoln S.; Kostin, Alexander; Kryachko, Valery; Steinhardt, William M.; Yudovskaya, Marina; Steinhardt, Paul J.

2013-08-01

A new meteorite find, named Khatyrka, was recovered from eastern Siberia as a result of a search for naturally occurring quasicrystals. The meteorite occurs as clastic grains within postglacial clay-rich layers along the banks of a small stream in the Koryak Mountains, Chukotka Autonomous Okrug of far eastern Russia. Some of the grains are clearly chondritic and contain Type IA porphyritic olivine chondrules enclosed in matrices that have the characteristic platy olivine texture, matrix olivine composition, and mineralogy (olivine, pentlandite, nickel-rich iron-nickel metal, nepheline, and calcic pyroxene [diopside-hedenbergite solid solution]) of oxidized-subgroup CV3 chondrites. A few grains are fine-grained spinel-rich calcium-aluminum-rich inclusions with mineral oxygen isotopic compositions again typical of such objects in CV3 chondrites. The chondritic and CAI grains contain small fragments of metallic copper-aluminum-iron alloys that include the quasicrystalline phase icosahedrite. One grain is an achondritic intergrowth of Cu-Al metal alloys and forsteritic olivine ± diopsidic pyroxene, both of which have meteoritic (CV3-like) oxygen isotopic compositions. Finally, some grains consist almost entirely of metallic alloys of aluminum + copper ± iron. The Cu-Al-Fe metal alloys and the alloy-bearing achondrite clast are interpreted to be an accretionary component of what otherwise is a fairly normal CV3 (oxidized) chondrite. This association of CV3 chondritic grains with metallic copper-aluminum alloys makes Khatyrka a unique meteorite, perhaps best described as a complex CV3 (ox) breccia.

DNA bases assembled on the Au(110)/electrolyte interface: A combined experimental and theoretical study

DEFF Research Database (Denmark)

Salvatore, Princia; Nazmutdinov, Renat R.; Ulstrup, Jens

2015-01-01

Among the low-index single-crystal gold surfaces, the Au(110) surface is the most active toward molecular adsorption and the one with fewest electrochemical adsorption data reported. Cyclic voltammetry (CV), electrochemically controlled scanning tunneling microscopy (EC-STM), and density functional......, accompanied by a pair of strong voltammetry peaks in the double-layer region in acid solutions. Adsorption of the DNA bases gives featureless voltammograms with lower double-layer capacitance, suggesting that all the bases are chemisorbed on the Au(110) surface. Further investigation of the surface structures...... of the adlayers of the four DNA bases by EC-STM disclosed lifting of the Au(110) reconstruction, specific molecular packing in dense monolayers, and pH dependence of the A and G adsorption. DFT computations based on a cluster model for the Au(110) surface were performed to investigate the adsorption energy...

CV controls from design to operation

CERN Document Server

Blanc, D

2002-01-01

The cooling and Ventilation (CV) group has emphasised the need to redefine its organisational structure at the end of 98. The main objective of this operation was to ensure the CV group to be more competitive and efficient through the growing tasks of the LHC projects. The main evolution given to this reorganisation is that the new structure is more project oriented and then operates on three distinct axes: Design, Work and Operation. Process control project management requires a complete and early interaction and participation of all the actors involved. This procedure to be efficient and constructive must be considered and performed not only during the design stage but along the project planning phases and must go beyond the completion work including the process control operation activity. The paper explains the present project management for process control. It describes the present constraints and gives suggestions to a different approach to these projects to improve performances and efficiency of a contr...

On the Ageing of High Energy Lithium-Ion Batteries—Comprehensive Electrochemical Diffusivity Studies of Harvested Nickel Manganese Cobalt Electrodes

Directory of Open Access Journals (Sweden)

Odile Capron

2018-01-01

Full Text Available This paper examines the impact of the characterisation technique considered for the determination of the L i + solid state diffusion coefficient in uncycled as in cycled Nickel Manganese Cobalt oxide (NMC electrodes. As major characterisation techniques, Cyclic Voltammetry (CV, Galvanostatic Intermittent Titration Technique (GITT and Electrochemical Impedance Spectroscopy (EIS were systematically investigated. L i + diffusion coefficients during the lithiation process of the uncycled and cycled electrodes determined by CV at 3.71 V are shown to be equal to 3 . 48 × 10 - 10 cm 2 ·s - 1 and 1 . 56 × 10 - 10 cm 2 ·s - 1 , respectively. The dependency of the L i + diffusion with the lithium content in the electrodes is further studied in this paper with GITT and EIS. Diffusion coefficients calculated by GITT and EIS characterisations are shown to be in the range between 1 . 76 × 10 - 15 cm 2 ·s - 1 and 4 . 06 × 10 - 12 cm 2 ·s - 1 , while demonstrating the same decreasing trend with the lithiation process of the electrodes. For both electrode types, diffusion coefficients calculated by CV show greater values compared to those determined by GITT and EIS. With ageing, CV and EIS techniques lead to diffusion coefficients in the electrodes at 3.71 V that are decreasing, in contrast to GITT for which results indicate increasing diffusion coefficient. After long-term cycling, ratios of the diffusion coefficients determined by GITT compared to CV become more significant with an increase about 1 order of magnitude, while no significant variation is seen between the diffusion coefficients calculated from EIS in comparison to CV.

Carbon black nanoparticles film electrode prepared by using substrate-induced deposition approach

Energy Technology Data Exchange (ETDEWEB)

Svegl, Irena Grabec; Bele, Marjan [National Institute of Chemistry, P.O. Box 660, SI-1001 Ljubljana (Slovenia); Ogorevc, Bozidar [National Institute of Chemistry, P.O. Box 660, SI-1001 Ljubljana (Slovenia)], E-mail: bogorevc@ki.si

2008-11-03

A new type of carbon film electrode, composed of a thin layer of tightly packed carbon black (CB) nanoparticles deposited onto a gelatin-covered indium tin oxide/glass support using the surface-induced deposition (SID) approach, is presented. Some parameters of the novel SID method were optimized and the surface image and functionalization of the investigated carbon black film electrode (CBFE) was inspected by employing scanning electron microscopy and infrared spectroscopy. A cyclic voltammetry (CV) study was conducted in which the electron-transfer kinetics and CBFE interfacial characteristics were evaluated employing several selected reference redox systems, such as [Ru(NH{sub 3}){sub 6}]{sup 3+/2+}, [Fe(CN){sub 6}]{sup 3-/4-} and Fe{sup 3+/2+} in aqueous, and ferrocene/ferrocenium in acetonitrile media. CV recordings were also performed in order to compare the electrochemical behavior of the CBFE with that of some well-known and established bare carbon-based electrodes. In order to confirm the validity of the CB film preparation method, the electroanalytical performance of the proposed CBFE was examined by carrying out linear sweep voltammetry of ascorbic acid (AA), anodic stripping square-wave voltammetry of Cu(II) in acidic medium, and amperometric measurements of hydrogen peroxide under flow injection conditions. The sensing characteristics of the novel carbon film electrode, demonstrated in this preliminary study, comprise: (i) a wide working potential window ranging from +1.0 to -1.3 V (depending on the solution pH), (ii) a wide applicable pH range (at least from 2 to 12), (iii) low voltammetric background (<5 {mu}A cm{sup -2}), (iv) a satisfactory linear voltammetric and amperometric response (r{sup 2} > 0.99) to various analytes, (v) good reproducibility (for example, r.s.d. of 2% in amperometric detection of H{sub 2}O{sub 2} and r.s.d. of 8.5% for electrode-to-electrode CV runs), and (vi) stable and fast current response (at least 100 CV runs with

Thin-layer voltammetry of soluble species on screen-printed electrodes: proof of concept.

Science.gov (United States)

Botasini, S; Martí, A C; Méndez, E

2016-10-17

Thin-layer diffusion conditions were accomplished on screen-printed electrodes by placing a controlled-weight onto the cast solution and allowing for its natural spreading. The restricted diffusive conditions were assessed by cyclic voltammetry at low voltage scan rates and electrochemical impedance spectroscopy. The relationship between the weight exerted over the drop and the thin-layer thickness achieved was determined, in such a way that the simple experimental set-up designed for this work could be developed into a commercial device with variable control of the thin-layer conditions. The experimental results obtained resemble those reported for the voltammetric features of electroactive soluble species employing electrodes modified with carbon nanotubes or graphene layers, suggesting that the attainment of the benefits reported for these nanomaterials could be done simply by forcing the solution to spread over the screen-printed electrodic system to form a thin layer solution. The advantages of thin-layer voltammetry in the kinetic characterization of quasi-reversible and irreversible processes are highlighted.

Produtividade e valor nutritivo da Brachiaria brizantha cv. Marandu em um sistema silvipastoril Productivity and nutritional value of Brachiaria brizantha cv. Marandu in a silvopastoral system

Directory of Open Access Journals (Sweden)

L.F. Sousa

2007-08-01

Full Text Available O experimento foi realizado em sistema silvipastoril (Ssp localizado no bioma de Cerrado, no município de Lagoa Santa, Minas Gerais, no ano agrícola de 2004-2005. Avaliou-se a influência do Ssp composto pela arbórea bolsa-de-pastor (Zeyheria tuberculosa sobre os parâmetros produção, atributos morfogênicos, composição bromatológica e valor nutritivo da gramínea Brachiaria brizantha cv. Marandu, e os efeitos sobre as condições microclimáticas. O delineamento experimental foi em blocos ao acaso, com cinco blocos (épocas de corte, dois tratamentos (T1 - B. brizantha cv. Marandu sombreada com a Z. tuberculosa e T2 - B. brizantha cv. Marandu, a pleno sol e três repetições (parcelas. O sombreamento proporcionado pela Z. tuberculosa, apesar de reduzir a produção de matéria seca (MS da gramínea, favoreceu o aumento do teor de proteina bruta (PB e não alterou a produção de PB/ha e nem afetou a concentração de FDN. Os teores de FDA foram mais altos que os encontrados a pleno sol, o que provavelmente resultou em menor degradabilidade in vitro da MS e da matéria orgânica, não alterando a degradabilidade efetiva.The experiment was carried out in a Silvopastoral system (Sps located in Brazilian Savannah, Lagoa Santa county, Minas Gerais State, during the agricultural year of 2004-2005. It was studied the influence of Sps formed by "Bolsa de Pastor" (Zeyheria tuberculosa on the production, morphogenic attributes, bromatological composition and nutritional value of the graminaceous Brachiaria brizantha cv. Marandu as well as on the microclimatic aspects. The Sps was established in 1982, in a red-yellow latossol by the natural regeneration process. The experiment was based on a randomized block design, with 5 blocks (cutting times, 2 treatments (T1 - B. brizantha cv. Marandu shaded by Z. tuberculosa and T2 - B. brizantha cv. Marandu at open sky and three repetitions (plots. Although the DM production of the graminaceous in the Sps

Segmentation of kidney using C-V model and anatomy priors

Science.gov (United States)

Lu, Jinghua; Chen, Jie; Zhang, Juan; Yang, Wenjia

2007-12-01

This paper presents an approach for kidney segmentation on abdominal CT images as the first step of a virtual reality surgery system. Segmentation for medical images is often challenging because of the objects' complicated anatomical structures, various gray levels, and unclear edges. A coarse to fine approach has been applied in the kidney segmentation using Chan-Vese model (C-V model) and anatomy prior knowledge. In pre-processing stage, the candidate kidney regions are located. Then C-V model formulated by level set method is applied in these smaller ROI, which can reduce the calculation complexity to a certain extent. At last, after some mathematical morphology procedures, the specified kidney structures have been extracted interactively with prior knowledge. The satisfying results on abdominal CT series show that the proposed approach keeps all the advantages of C-V model and overcome its disadvantages.

Pengaruh Kualitas Pelayanan terhadap Loyalitas Pelanggan di Rental Mobil CV. Ilham Motor Gandu Mlarak Ponorogo

OpenAIRE

Dhika Amalia

2015-01-01

The purpose of this study was to determine the amount of quality customer service and loyalty to know a very dominant factor affecting customer loyalty in the CV . Ilham Motor. This research method is the primary data from the questionnaires , sampling technique is a technique associated with customer 100 CV Ilham Motor . Data analysis is a quantitative method to test the validity , reliability testing , multiple linear regression analysis , the correlation coefficient analytic , analytic det...

Electrodeposition of Iridium Oxide by Cyclic Voltammetry: Application of Response Surface Methodology

Directory of Open Access Journals (Sweden)

Kakooei Saeid

2014-07-01

Full Text Available The effects of scan rate, temperature, and number of cycles on the coating thickness of IrOX electrodeposited on a stainless steel substrate by cyclic voltammetry were investigated in a statistical system. The central composite design, combined with response surface methodology, was used to study condition of electrodeposition. All fabricated electrodes were characterized using electrochemical methods. Field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy were performed for IrOX film characterization. Results showed that scan rate significantly affects the thickness of the electrodeposited layer. Also, the number of cycles has a greater effect than temperature on the IrOX thickness.

AstroCV: Astronomy computer vision library

Science.gov (United States)

González, Roberto E.; Muñoz, Roberto P.; Hernández, Cristian A.

2018-04-01

AstroCV processes and analyzes big astronomical datasets, and is intended to provide a community repository of high performance Python and C++ algorithms used for image processing and computer vision. The library offers methods for object recognition, segmentation and classification, with emphasis in the automatic detection and classification of galaxies.

Voltammetry of Organic Pollutants on FeOOH Nanorods

International Nuclear Information System (INIS)

Zhang, Yuanyuan; Wan, Qijin; Yang, Nianjun

2017-01-01

FeOOH nanorods synthesized using a solvothermal approach have been employed to investigate the electrochemistry of organic pollutions, including ponceau 4R (PR), sunset yellow (SY), and tetrabromobisphenol A (TBBPA). The as-prepared FeOOH nanorods have been characterized using scanning electron microscopes (SEM), transmission electron microscope (TEM), X-ray photoelectron spectrometry, Brunauer-Emmett-Teller measurements, and electrochemical techniques. The modified electrode based on FeOOH nanorods exhibits a porous and net-like structure, resulting in a high surface area and many reactive/adsorption sites for soluble compounds. On this modified electrode, fast electron transfer processes of redox probes have been achieved. Electrochemistry of PR, SY, and TBBPA has been studied in detail using voltammetry, impedance, and chronocoulometry. The sensitive monitoring of both individual and total concentrations of three organic pollutions has been realized. The detection limits are 0.2, 1.0, and 0.55 nM for PR, SY, and TBBPA, respectively. Such an electrode is then promising for the electrochemical investigation and analysis of organic pollutions in different environments.

Extreme Basicity of Biguanide Drugs in Aqueous Solutions: Ion Transfer Voltammetry and DFT Calculations

Czech Academy of Sciences Publication Activity Database

Langmaier, Jan; Pižl, Martin; Samec, Zdeněk; Záliš, Stanislav

2016-01-01

Roč. 120, č. 37 (2016), s. 7344-7350 ISSN 1089-5639 R&D Projects: GA ČR(CZ) GA15-03139S Institutional support: RVO:61388955 Keywords : voltammetry * Alkalinity * Complexation Subject RIV: CG - Electrochemistry Impact factor: 2.847, year: 2016

[Habitat factor analysis for Torreya grandis cv. Merrillii based on spatial information technology].

Science.gov (United States)

Wang, Xiao-ming; Wang, Ke; Ao, Wei-jiu; Deng, Jin-song; Han, Ning; Zhu, Xiao-yun

2008-11-01

Torreya grandis cv. Merrillii, a tertiary survival plant, is a rare tree species of significant economic value and expands rapidly in China. Its special habitat factor analysis has the potential value to provide guide information for its planting, management, and sustainable development, because the suitable growth conditions for this tree species are special and strict. In this paper, the special habitat factors for T. grandis cv. Merrillii in its core region, i.e., in seven villages of Zhuji City, Zhejiang Province were analyzed with Principal Component Analysis (PCA) and a series of data, such as IKONOS image, Digital Elevation Model (DEM), and field survey data supported by the spatial information technology. The results showed that T. grandis cv. Merrillii exhibited high selectivity of environmental factors such as elevation, slope, and aspect. 96.22% of T. grandis cv. Merrillii trees were located at the elevation from 300 to 600 m, 97.52% of them were found to present on the areas whose slope was less than 300, and 74.43% of them distributed on sunny and half-sunny slopes. The results of PCA analysis indicated that the main environmental factors affecting the habitat of T. grandis cv. Merrillii were moisture, heat, and soil nutrients, and moisture might be one of the most important ecological factors for T. grandis cv. Merrillii due to the unique biological and ecological characteristics of the tree species.

Evaluation of faba beans ( Vicia faba cv. Fiord) and sweet lupins ...

African Journals Online (AJOL)

Evaluation of faba beans ( Vicia faba cv. Fiord) and sweet lupins ( Lupizus albus cv. Kiev) as protein sources for ... P igsi n the metabolisrna ndN balance trial consurned5 % less( P < 0.01)o 1'thel upind ietc omparedto the fabab eand iet (l 370 vs. | 440 gld).N o significandt ift'erenceisn the digestiblee nergy( DE) contenta nd ...

Ion transfer voltammetry of metformin and phenformin at a polarized ionic liquid-membrane

Czech Academy of Sciences Publication Activity Database

Langmaier, Jan; Samec, Zdeněk; Samcová, E.

2015-01-01

Roč. 61, č. 3 (2015), s. 214-214 ISSN 0034-6691. [Annual Meeting of the Polarographic Society of Japan /61./. 24.11.2015-25.11.2015, Himeji] R&D Projects: GA ČR(CZ) GA15-03139S Institutional support: RVO:61388955 Keywords : electrochemistry * voltammetry Subject RIV: CG - Electrochemistry

PlantCV v2: Image analysis software for high-throughput plant phenotyping

Directory of Open Access Journals (Sweden)

Malia A. Gehan

2017-12-01

Full Text Available Systems for collecting image data in conjunction with computer vision techniques are a powerful tool for increasing the temporal resolution at which plant phenotypes can be measured non-destructively. Computational tools that are flexible and extendable are needed to address the diversity of plant phenotyping problems. We previously described the Plant Computer Vision (PlantCV software package, which is an image processing toolkit for plant phenotyping analysis. The goal of the PlantCV project is to develop a set of modular, reusable, and repurposable tools for plant image analysis that are open-source and community-developed. Here we present the details and rationale for major developments in the second major release of PlantCV. In addition to overall improvements in the organization of the PlantCV project, new functionality includes a set of new image processing and normalization tools, support for analyzing images that include multiple plants, leaf segmentation, landmark identification tools for morphometrics, and modules for machine learning.

Voltammetry of uranyl chloride in the LiCl - KCl eutectic

International Nuclear Information System (INIS)

Fondanaiche, J.C.

1965-01-01

Spent UO 2 - PuO 2 fuels can be reprocessed in a molten salt media. Uranium dioxide can easily be dissolved as UO 2 Cl 2 in a molten salt bath using chlorine gas. A study of quantitative analysis of an uranyl chloride solution in the LiCl-KCl eutectic at 400 C has been performed here using voltammetry (a large area-graphite indicator electrode has been employed). The precision which is obtained is around 6 per cent for concentrations below 10 -2 M. Precision decreases slightly for more concentrated solutions. The study of polarization curves allowed to give a reduction mechanism for the UO 2 ++ ion. For dilute solutions, this reduction proceeds through the UO 2 + ion. But interpretation of current-potential curves is made difficult by the dismutation reaction of the UO 2 ion and by the fact that the surface of the indicator electrode is not renewed. (author) [fr

Voltammetry of Aluminum Nanoparticles in Aqueous Media with Hanging Mercury Drop Electrode

Czech Academy of Sciences Publication Activity Database

Korshunov, A.; Heyrovský, Michael

2010-01-01

Roč. 22, 17-18 (2010), s. 1989-1993 ISSN 1040-0397. [International Conference on Modern Electroanalytical Methods. Prague, 09.12.2009-14.12.2009] R&D Projects: GA AV ČR IAA400400806 Institutional research plan: CEZ:AV0Z40400503 Keywords : linear cyclic voltammetry * Hanging mercury drop electrode * Aluminum nanoparticles dispersion Subject RIV: CG - Electrochemistry Impact factor: 2.721, year: 2010

Determination of azidothymidine - an antiproliferative and virostatic drug by square-wave voltammetry

Czech Academy of Sciences Publication Activity Database

Vacek, Jan; Andrysík, Zdeněk; Trnková, L.; Kizek, René

2004-01-01

Roč. 16, č. 3 (2004), s. 224-230 ISSN 1040-0397 R&D Projects: GA ČR GA203/02/0422; GA AV ČR IAA1163201; GA AV ČR IBS5004009 Institutional research plan: CEZ:AV0Z5004920 Keywords : azidothymidine (AZT) * square-wave voltammetry * hanging mercury drop electrode (HMDE) Subject RIV: BO - Biophysics Impact factor: 2.038, year: 2004

Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

International Nuclear Information System (INIS)

Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N.

2004-01-01

The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values

Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N

2004-09-15

The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values.

Characterization of inclusion complexes of organic ions with hydrophilic hosts by ion transfer voltammetry with solvent polymeric membranes.

Science.gov (United States)

Olmos, José Manuel; Laborda, Eduardo; Ortuño, Joaquín Ángel; Molina, Ángela

2017-03-01

The quantitative characterization of inclusion complexes formed in aqueous phase between organic ions and hydrophilic hosts by ion-transfer voltammetry with solvent polymeric membrane ion sensors is studied, both in a theoretical and experimental way. Simple analytical solutions are presented for the determination of the binding constant of the complex from the variation with the host concentration of the electrochemical signal. These solutions are valid for any voltammetric technique and for solvent polymeric membrane ion sensors comprising one polarisable interface (1PI) and also, for the first time, two polarisable interfaces (2PIs). Suitable experimental conditions and data analysis procedures are discussed and applied to the study of the interactions of a common ionic liquid cation (1-octyl-3-metyl-imidazolium) and an ionisable drug (clomipramine) with two hydrophilic cyclodextrins: α-cyclodextrin and 2-hydroxypropyl-β-cyclodextrin. The experimental study is performed via square wave voltammetry with 2PIs and 1PI solvent polymeric membranes and in both cases the electrochemical experiments enable the detection of inclusion complexes and the determination of the corresponding binding constant. Copyright © 2016 Elsevier B.V. All rights reserved.

Glyphosate detection with ammonium nitrate and humic acids as potential interfering substances by pulsed voltammetry technique.

Science.gov (United States)

Martínez Gil, Pablo; Laguarda-Miro, Nicolas; Camino, Juan Soto; Peris, Rafael Masot

2013-10-15

Pulsed voltammetry has been used to detect and quantify glyphosate on buffered water in presence of ammonium nitrate and humic substances. Glyphosate is the most widely used herbicide active ingredient in the world. It is a non-selective broad spectrum herbicide but some of its health and environmental effects are still being discussed. Nowadays, glyphosate pollution in water is being monitored but quantification techniques are slow and expensive. Glyphosate wastes are often detected in countryside water bodies where organic substances and fertilizers (commonly based on ammonium nitrate) may also be present. Glyphosate also forms complexes with humic acids so these compounds have also been taken into consideration. The objective of this research is to study the interference of these common pollutants in glyphosate measurements by pulsed voltammetry. The statistical treatment of the voltammetric data obtained lets us discriminate glyphosate from the other studied compounds and a mathematical model has been built to quantify glyphosate concentrations in a buffer despite the presence of humic substances and ammonium nitrate. In this model, the coefficient of determination (R(2)) is 0.977 and the RMSEP value is 2.96 × 10(-5) so the model is considered statistically valid. Copyright © 2013 Elsevier B.V. All rights reserved.

Le « CV multilingue automatisé »

OpenAIRE

Terrier, Linda; Vaillant Sirdey, Christine; Arino, Mathilde

2014-01-01

De par leur mission d’insertion professionnelle, les IUT ont depuis longtemps inscrit dans leurs programmes pédagogiques nationaux l’élaboration du curriculum vitae en langue(s) étrangère(s). La politique de mobilité internationale encourage aujourd’hui toutes les formations universitaires du secteur LANSAD à intégrer la création d’un CV dans leur formation en langue.La rédaction d’un CV, déjà complexe en langue maternelle, réclame pour d’autres langues la maîtrise de savoir-faire spécifiques...

Electrical conductivity measurements of bacterial nanowires from Pseudomonas aeruginosa

International Nuclear Information System (INIS)

Maruthupandy, Muthusamy; Anand, Muthusamy; Beevi, Akbar Sait Hameedha; Priya, Radhakrishnan Jeeva; Maduraiveeran, Govindhan

2015-01-01

The extracellular appendages of bacteria (flagella) that transfer electrons to electrodes are called bacterial nanowires. This study focuses on the isolation and separation of nanowires that are attached via Pseudomonas aeruginosa bacterial culture. The size and roughness of separated nanowires were measured using transmission electron microscopy (TEM) and atomic force microscopy (AFM), respectively. The obtained bacterial nanowires indicated a clear image of bacterial nanowires measuring 16 nm in diameter. The formation of bacterial nanowires was confirmed by microscopic studies (AFM and TEM) and the conductivity nature of bacterial nanowire was investigated by electrochemical techniques. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), which are nondestructive voltammetry techniques, suggest that bacterial nanowires could be the source of electrons—which may be used in various applications, for example, microbial fuel cells, biosensors, organic solar cells, and bioelectronic devices. Routine analysis of electron transfer between bacterial nanowires and the electrode was performed, providing insight into the extracellular electron transfer (EET) to the electrode. CV revealed the catalytic electron transferability of bacterial nanowires and electrodes and showed excellent redox activities. CV and EIS studies showed that bacterial nanowires can charge the surface by producing and storing sufficient electrons, behave as a capacitor, and have features consistent with EET. Finally, electrochemical studies confirmed the development of bacterial nanowires with EET. This study suggests that bacterial nanowires can be used to fabricate biomolecular sensors and nanoelectronic devices. (paper)

Retendering of ST-CV maintenance contract

CERN Document Server

Battistin, M

2003-01-01

During the next three years, the ST/CV group will be deeply involved in the installation works for the LHC project. During this period the need for maintenance activity will decrease. The minimum level will be reached during the “long shutdown” of the PS and SPS machines in 2005. The budget for the maintenance will decrease accordingly, thus the CV group had to review its maintenance strategy. The new contract, which started on January 1st 2003, has been defined to cope with these workload variations during the next years and to guarantee the minimum maintenance activity on the existing equipment. A lump-sum contract based on a win-win strategy has been discarded. The contractor no longer has to guarantee the performance of the CERN cooling and ventilation systems. A new price list strategy based on performance indicators and penalties has been chosen. The contractor now has to guarantee the performance of every maintenance operation demanded by CERN. This modification obliged the Operation section of the...

Effects of temperature, concentration, and uranium chloride mixture on zirconium electrochemical studies in LiCl−KCl eutectic salt

Energy Technology Data Exchange (ETDEWEB)

Hoover, Robert O. [Department of Chemical and Materials Engineering and Nuclear Engineering Program, University of Idaho, Center for Advanced Energy Studies, 995 University Blvd, Idaho Falls, ID 8340 (United States); Yoon, Dalsung [Department of Mechanical & Nuclear Engineering, Virginia Commonwealth University, 401 West Main St., Richmond, VA 23284 (United States); Phongikaroon, Supathorn, E-mail: sphongikaroon@vcu.edu [Department of Mechanical & Nuclear Engineering, Virginia Commonwealth University, 401 West Main St., Richmond, VA 23284 (United States)

2016-08-01

Experimental studies were performed to provide measurement and analysis of zirconium (Zr) electrochemistry in LiCl−KCl eutectic salt at different temperatures and concentrations using cyclic voltammetry (CV). An additional experimental set with uranium chloride added into the system forming UCl{sub 3}−ZrCl{sub 4}−LiCl−KCl was performed to explore the general behavior of these two species together. Results of CV experiments with ZrCl{sub 4} show complicated cathodic and anodic peaks, which were identified along with the Zr reactions. The CV results reveal that diffusion coefficients (D) of ZrCl{sub 4} and ZrCl{sub 2} as the function of temperature can be expressed as D{sub Zr(IV)} = 0.00046exp(−3716/T) and D{sub Zr(II)} = 0.027exp(−5617/T), respectively. The standard rate constants and apparent standard potentials of ZrCl{sub 4} at different temperatures were calculated. Furthermore, the results from the mixture of UCl{sub 3} and ZrCl{sub 4} indicate that high concentrations of UCl{sub 3} hide the features of the smaller concentration of ZrCl{sub 4} while Zr peaks become prominent as the concentration of ZrCl{sub 4} increases.

Novel circulatory connection from the acupoint Zhong Wan(CV12 to pancreas

Directory of Open Access Journals (Sweden)

Minsoo Kim

2008-03-01

Full Text Available Objectives : Demonstrating a novel circulatory path from the acupoint(CV12 to the pancreas. Method : Alcian blue(1% solution, 20μl, pH 7.4 was injected into the acupoint(CV12. Two hours later the surfaces of internal organs were observed by using a stereomicroscope. Results : Alcian blue arrived and colored the omental fat band(OFB on the pancreas. The OFB connected the head and tail of the pancreas, the pancreas and the spleen, and the pancreas and the stomach. Conclusion : The existence of a novel circulatory path from the acupoint CV12 to the pancreas and its OFB was demonstrated.

Detoxification of microcystin-LR in water by Portulaca oleracea cv.

Science.gov (United States)

Isobe, Takatoshi; Okuhata, Hiroshi; Miyasaka, Hitoshi; Jeon, Bong-Seok; Park, Ho-Dong

2014-03-01

Microcystin-LR (0.02 μg/ml) in the hydroculture medium of Portulaca oleracea cv., became below the detection level (<0.0001 μg/ml) by HPLC analysis after 7 days. The toxicity of microcystin estimated with protein phosphatase inhibition assay, however, remained at 37% of the initial level, indicating that microcystin-LR was transformed by P. oleracea cv. into unknown compound(s) of lower toxicity. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Polystyrene/magnetite nanocomposite synthesis and characterization: investigation of magnetic and electrical properties for using as microelectromechanical systems (MEMS

Directory of Open Access Journals (Sweden)

Omidi Mohammad Hassan

2017-02-01

Full Text Available In this work, a novel polystyrene/Fe3O4 nanocomposite prepared by in-situ method is presented. Magnetic Fe3O4 nanoparticles were encapsulated by polystyrene. The FT-IR spectra confirmed polystyrene/Fe3O4 nanocomposite preparation. The electrical properties of prepared nanocomposite were investigated by cyclic voltammetry (CV. The CV analysis showed good electrical conductivity of the synthesized nanocomposite. Magnetic properties of the nanocomposite were studied by vibrating sample magnetometer (VSM. The VSM analysis confirmed magnetic properties of the nanocomposite. The morphology and the size of the synthesized nanocomposite were investigated by field emission scanning electron microscope (FESEM. According to the VSM and CV results, such nanocomposite can be used in microelectromechanical systems.

A Cuprous Oxide Thin Film Non-Enzymatic Glucose Sensor Using Differential Pulse Voltammetry and Other Voltammetry Methods and a Comparison to Different Thin Film Electrodes on the Detection of Glucose in an Alkaline Solution

Directory of Open Access Journals (Sweden)

Yifan Dai

2018-01-01

Full Text Available A cuprous oxide (Cu2O thin layer served as the base for a non-enzymatic glucose sensor in an alkaline medium, 0.1 NaOH solution, with a linear range of 50–200 mg/dL using differential pulse voltammetry (DPV measurement. An X-ray photoelectron spectroscopy (XPS study confirmed the formation of the cuprous oxide layer on the thin gold film sensor prototype. Quantitative detection of glucose in both phosphate-buffered saline (PBS and undiluted human serum was carried out. Neither ascorbic acid nor uric acid, even at a relatively high concentration level (100 mg/dL in serum, interfered with the glucose detection, demonstrating the excellent selectivity of this non-enzymatic cuprous oxide thin layer-based glucose sensor. Chronoamperometry and single potential amperometric voltammetry were used to verify the measurements obtained by DPV, and the positive results validated that the detection of glucose in a 0.1 M NaOH alkaline medium by DPV measurement was effective. Nickel, platinum, and copper are commonly used metals for non-enzymatic glucose detection. The performance of these metal-based sensors for glucose detection using DPV were also evaluated. The cuprous oxide (Cu2O thin layer-based sensor showed the best sensitivity for glucose detection among the sensors evaluated.

Characterization of a novel gene encoding ankyrin repeat domain from Cotesia vestalis polydnavirus (CvBV)

International Nuclear Information System (INIS)

Shi Min; Chen Yafeng; Huang Fang; Liu Pengcheng; Zhou Xueping; Chen Xuexin

2008-01-01

Cotesia vestalis (Haliday) is an endoparasitoid of Plutella xylostella (L.) larvae and injects a polydnavirus (CvBV) into its host during oviposition. In this report we describe the characterization of a gene (CvBV805) and its products. CvBV805 is located on the segment S8 of CvBV genome; it has a size of 909 bp and encodes a predicted protein of 125 amino acids. This protein contains an ankyrin repeat domain with a high degree of similarity with IκB-like genes. Gene transcripts were detected in extracts of the host as early as 2 h post-parasitization (p.p.) and continued to be detected through 24 h. Tissue-specific expression patterns showed that CvBV805 might be involved in early host immunosuppression. CvBV805 was detected in parasitized hosts at 12 h p.p. and in rBac-eGFP-CvBV805-infected Tn-5B1-4 cells at 72 h.p.i. by using western blots analysis. The size of the protein expressed in the host hemocytes and infected Tn-5B1-4 cells was 17 kDa and 56 kDa (including eGFP), respectively, which nearly corresponded with the predicted molecular weight (14.31 kDa) of CvBV805, suggesting that the protein did not undergo extensive post-translational modification. The protein was confirmed to be present within the nuclear region in hemocytes of the parasitized P. xylostella larvae at 48 h p.p. using confocal laser scanning microscopy

DIFFERENTIAL PULSE ANODIC STRIPPING VOLTAMMETRY FOR DETERMINATION OF SOME HEAVY METALS IN URANIUM

Directory of Open Access Journals (Sweden)

Saryati Saryati

2010-06-01

Full Text Available The direct determination of some metals impurity in uranium by using differential pulse anodic stripping voltammetry (DPASV method at a hanging mercury drop electrode and in a carbonate buffer media was developed. It was found that the carbonate buffer show the strongest affinity for uranium and gives the best separation between the DPASV peaks of heavy metals impurities. The carbonate concentration markedly affects the oxidation and reduction the major and the minor constituents of the uranium samples. In 0.1 M carbonate buffer solution pH 10, copper, bismuth, thalium, lead, cadmium, zinc, could be determined without the removal of the uranium matrix. Recovery and relative standard deviation (RSD of this method was in the range of 174% - 85.2% for recovery and 36.8% - 1.2% for RSD. The larger error of analytical result was obtained for Zn at low concentration. In general, the analytic results error and RSD decreased with increasing metals concentration.   Keywords: heavy metal determination, differential pulse anodic stripping voltammetry, uranium

Optical and electrochemical studies of polyaniline/SnO2 fibrous nanocomposites

International Nuclear Information System (INIS)

Manivel, P.; Ramakrishnan, S.; Kothurkar, Nikhil K.; Balamurugan, A.; Ponpandian, N.; Mangalaraj, D.; Viswanathan, C.

2013-01-01

Graphical abstract: Fiber with porous like structure of PANI/SnO 2 nanocomposites were prepared by simplest in situ chemical polymerization method. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The excellent electrochemical properties of composite electrode show the specific capacitance of 173 F/g at a scan rate of 25 m V/s. Display Omitted Highlights: ► Self assembled PANI/SnO 2 nanocomposites were synthesized by simple polymerization method. ► Electrochemical behavior of PANI/SnO 2 nanocomposites electrode was analyzed by CV. ► Nanocomposites exhibit a higher specific capacitance of 173 F/g, compared with pure SnO 2 . -- Abstract: Polyaniline (PANI)/tin oxide (SnO 2 ) fibrous nanocomposites were successfully prepared by an in situ chemical polymerization method with suitable conditions. The obtained composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, photoluminescence (PL), electrical conductivity and cyclic voltammetry studies (CV). The XRD pattern of the as-prepared sample shows the presence of tetragonal SnO 2 and the crystalline structure of SnO 2 was not affected with the incorporation of PANI. The FTIR analysis confirms the uniform attachment of PANI on the surface of SnO 2 nanostructures. SEM images show a fibrous agglomerated structure of PANI/SnO 2 . The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The electrochemical behavior of the PANI/SnO 2 composite electrode was evaluated in a H 2 SO 4 solution using cyclic voltammetry. The composite electrode exhibited a specific capacitance of 173 F/g at a scan rate 25 mV/s. Thus the as-prepared PANI/SnO 2 composite shows excellent electrochemical properties, suggesting that this composite is a promising material for supercapacitors.

Determination of trace mercury in water based on N-octylpyridinium ionic liquids preconcentration and stripping voltammetry.

Science.gov (United States)

Li, Zhenhan; Xia, Shanhong; Wang, Jinfen; Bian, Chao; Tong, Jianhua

2016-01-15

A novel method for determination of trace mercury in water is developed. The method is performed by extracting mercury firstly with ionic liquids (ILs) and then detecting the concentration of mercury in organic media with anodic stripping voltammetry. Liquid-liquid extraction of mercury(II) ions by four ionic liquids with N-octylpyridinium cations ([OPy](+)) was studied. N-octylpyridinium tetrafluoroborate and N-octylpyridinium trifluoromethylsulfonate were found to be efficient and selective extractant for mercury. Temperature controlled dispersive liquid phase microextraction (TC-DLPME) technique was utilized to improve the performance of preconcentration. After extraction, precipitated IL was diluted by acetonitrile buffer and mercury was detected by differential pulse stripping voltammetry (DPSV) with gold disc electrode. Mercury was enriched by 17 times while interfering ions were reduced by two orders of magnitude in the organic media under optimum condition. Sensitivity and selectivity for electrochemical determination of mercury were improved by using the proposed method. Tap, pond and waste water samples were analyzed with recoveries ranging from 81% to 107% and detection limit of 0.05 μg/L. Copyright © 2015 Elsevier B.V. All rights reserved.

Electrocatalytic oxidative determination of reserpine at electrochemically functionalized single walled carbon nanotube with polyaniline

International Nuclear Information System (INIS)

Dar, Riyaz Ahmad; Naikoo, Gowhar Ahmad; Pitre, Krishna Sadashive

2013-01-01

Graphical abstract: Electrode oxidation mechanism of reserpine at PANI modified-SWCNT/CPE. -- Highlights: • Electropolymerization of polyaniline at SWCNT/CPE. • CV, EIS, CC SEM techniques were used for characterization of electrode. • Electrode showed electrocatalytic activity towards anodic oxidation of reserpine. • Oxidation process as irreversible and adsorption-controlled. • Reserpine in bark of Rauwolfia serpentina and in its pharmaceutical formulations. -- Abstract: In the present work a polyaniline film was successfully deposited by electropolymerization on single walled carbon nanotube paste electrode. The electrode was characterized using cyclic voltammetry, electrochemical impedance spectroscopy, chronocoulometry and scanning electron microscopy. The modified electrode showed electrocatalytic behaviour towards the anodic oxidation of reserpine. The adsorptive stripping voltammetric behaviour of reserpine at polyaniline film modified single walled carbon nanotube paste electrode (modified-SWCNTPE) was investigated and validated in pharmaceuticals and biological fluids by cyclic voltammetry (CV) and adsorptive stripping differential pulse voltammetry (AdSDPV) in 0.02 M phosphate buffer in the pH range of 2.5–8.5. Cyclic voltammetry has shown that the oxidation process is irreversible over the pH range studied and exhibited an adsorption-controlled behaviour. Further, the overall electrode process is mainly diffusion controlled with adsorption effects. The proposed more sensitive AdSDPV method allow quantitation over the range 0.085 μg mL −1 to 0.87 μg mL −1 with the detection limit of 0.407 ng mL −1 and has been successfully used to determine reserpine in bark of Rauwolfia serpentina and in its pharmaceutical formulations

Practical measurement of silicon in low alloy steels by differential pulse stripping voltammetry

International Nuclear Information System (INIS)

Rahier, A.; Lunardi, S.; Triki, C.

2005-01-01

A sensitive differential pulse anodic stripping voltammetry has been adapted to allow the determination of Si in low-alloy steels using a hanging mercury drop electrode. The method has been qualified using certified ASTM standards and is now running in routine. The present report describes the experimental details, thereby allowing the reader to carry out the measurements precisely. (author)

FORMATION AND ELECTROCHEMICAL BEHAVIOUR OF POLYION COMPLEXES FOR ELECTROCHROMIC DISPLAY MATERIAL

Institute of Scientific and Technical Information of China (English)

WAN Guoxiang; WANG Bing; DENG Zhenghua; LUO Chunqiao

1988-01-01

Formation of intermacromolecular complexes containing viologen and electron-transfer reaction occurred on the electrode modified by the complex films were studied. Compositions and morphology of the complexes depend on the properties of polyanion and chemical environment of complexation. The analytical results of cyclic voltammetry (CV) and rotating disk voltammetry(RDV) indicated: (1) active sites of viologen in network of complexes transferred single electron reversibly; (2) the redox peak currents showed excellent symmetry and stability; (3) redox potentials were related to properties of polyanions, varying from -0.4 to -0.6V (vs. SCE). Electrochromic materials with different displaying colors could be obtained by changing the structure of polyviologen.

Wilting and biological additive effect on in situ degradability and chemical composition of Arachis pintoi cv Belomonte silage

OpenAIRE

Rosana Aparecida Possenti; Evaldo Ferrari Júnior; Valdinei Tadeu Paulino; Ivani Pozar Otsuk; Patrícia Brás

2010-01-01

The purpose of this work was to evaluate the effect of wilting and biological additive amendment on chemical composition, fermentation and ruminal degradability of Arachis pintoi cv Belmonte silage. The following treatments were analysed: T1- Arachis pintoi cv Belmonte fresh forage; T2 - Arachis pintoi cv Belmonte fresh forage plus bacterial additive added to the forage prior to the ensilage; T3- Arachis pintoi cv Belmonte wilted by the sun for 4 hours; T4- Arachis pintoi cv Belmonte wilted b...

STRATEGI PEMASARAN PRODUK DIGITAL PRINTING PADA CV. FNB DIGITAL JAMBI

OpenAIRE

Yuniarti, Yenni; Mauliana, Sarah

2012-01-01

CV. Digital FNB is one of the companies that involved in Digital Printing business. Based on survey in the middle of 2011-2012, there are 31 digital printing businesses in the city of Jambi. In order to examine the marketing stratey implemented, descriptive study has been conducted, uses interview, observation, and documentation as instruments. The strategy that observed in this study consist of marketing strategy including market segmentation, targeting, product strategy, pricing strategy, ...

Implementasi JSON Parsing Pada Aplikasi Mobile E-commerce Studi Kasus : CV V3 Tekno Indonesia

OpenAIRE

Destian Wijaya, Bhakti; E.M.A, Fenty; Fiade, Andrew

2015-01-01

Sistem operasi Android saat ini merupakan salah satu dari sekian banyak sistem operasi padasmartphone yang sedang mengalami pertumbuhan pesat di dunia, khususnya di Indonesia. CV VitigaTekno Indonesia bergerak di bidang pemasaran gadget membutuhkan media marketing yang dapatdiakses secara online selain website yaitu melalui smartphone. Oleh karena itu penelitian ini berfokuspada bagaimana membuat aplikasi mobile e-commerce pada smartphone Android, dengan caramengambil data yang berasal dari w...

Nutritive evaluation of Medicago truncutula (cv. jernalong) pasture ...

African Journals Online (AJOL)

Nutritive evaluation of Medicago truncutula (cv. jernalong) pasture for sheep. 1. Seasonal .... obtained by laboratory work, using in vitro techniques. (Engels et al. .... model that was used to explain 92,3% of the variance in. IVDOM content.

A novel lable-free electrochemical immunosensor for carcinoembryonic antigen based on gold nanoparticles-thionine-reduced graphene oxide nanocomposite film modified glassy carbon electrode.

Science.gov (United States)

Kong, Fen-Ying; Xu, Mao-Tian; Xu, Jing-Juan; Chen, Hong-Yuan

2011-10-15

In this paper, gold nanoparticle-thionine-reduced graphene oxide (GNP-THi-GR) nanocomposites were prepared to design a label-free immunosensor for the sensitive detection of carcinoembryonic antigen (CEA). The nanocomposites with good biocompatibility, excellent redox electrochemical activity and large surface area were coated onto the glassy carbon electrode (GCE) surface and then CEA antibody (anti-CEA) was immobilized on the electrode to construct the immunosensor. The morphologies and electrochemistry of the formed nanocomposites were investigated by using scanning electron microscopy (SEM), ultraviolet-visible (UV-vis) spectrometry, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). CV and differential pulse voltammetry (DPV) studies demonstrated that the formation of antibody-antigen complexes decreased the peak current of THi in the GNP-THi-GR nanocomposites. The decreased currents were proportional to the CEA concentration in the range of 10-500 pg/mL with a detection limit of 4 pg/mL. The proposed method was simple, fast and inexpensive for the determination of CEA at very low levels. Copyright © 2011 Elsevier B.V. All rights reserved.

Slurry sampling in serum blood for mercury determination by CV-AFS

International Nuclear Information System (INIS)

Aranda, Pedro R.; Gil, Raul A.; Moyano, Susana; De Vito, Irma; Martinez, Luis D.

2009-01-01

The heavy metal mercury (Hg) is a neurotoxin known to have a serious health impact even at relatively low concentrations. A slurry method was developed for the sensitive and precise determination of mercury in human serum blood samples by cold vapor generation coupled to atomic fluorescence spectrometry (CV-AFS). All variables related to the slurry formation were studied. The optimal hydrochloric concentration and tin(II) chloride concentration for CV generation were evaluated. Calibration within the range 0.1-10 μg L -1 Hg was performed with the standard addition method, and compared with an external calibration. Additionally, the reliability of the results obtained was evaluated by analyzing mercury in the same samples, but submitted to microwave-assisted digestion method. The limit of detection was calculated as 25 ng L -1 and the relative standard deviation was 3.9% at levels around of 0.4 μg L -1 Hg

Sim4CV: A Photo-Realistic Simulator for Computer Vision Applications

KAUST Repository

Müller, Matthias

2018-03-24

We present a photo-realistic training and evaluation simulator (Sim4CV) (http://www.sim4cv.org) with extensive applications across various fields of computer vision. Built on top of the Unreal Engine, the simulator integrates full featured physics based cars, unmanned aerial vehicles (UAVs), and animated human actors in diverse urban and suburban 3D environments. We demonstrate the versatility of the simulator with two case studies: autonomous UAV-based tracking of moving objects and autonomous driving using supervised learning. The simulator fully integrates both several state-of-the-art tracking algorithms with a benchmark evaluation tool and a deep neural network architecture for training vehicles to drive autonomously. It generates synthetic photo-realistic datasets with automatic ground truth annotations to easily extend existing real-world datasets and provides extensive synthetic data variety through its ability to reconfigure synthetic worlds on the fly using an automatic world generation tool.

Direct determination of molybdenum in seawater by adsorption cathodic stripping square-wave voltammetry.

Science.gov (United States)

Sun, Y C; Mierzwa, J; Lan, C R

2000-06-30

A reliable and very sensitive procedure for the determination of trace levels of molybdenum in seawater is proposed. The complex of molybdenum with 8-hydroxyquinoline (Oxine) is analyzed by cathodic stripping square-wave voltammetry based on the adsorption collection onto a hanging mercury drop electrode (HMDE). This procedure of molybdenum determination was found to be more favorable than differential pulse cathodic stripping voltammetry because of inherently faster scan rate and much better linearity obtained through the one-peak (instead of one-of-two peaks) calibration. The variation of polarographic peak and peak current with a pH, adsorption time, adsorption potential, and some instrumental parameters such as scan rate and pulse height were optimized. The alteration of polarographic wave and its likely mechanism are also discussed. The relationship between peak current and molybdenum concentration is linear up to 150 mug l(-1). Under the optimal analytical conditions, the determination limit of 0.5 mug l(-1) Mo was reached after 60 s of the stirred collection. The estimated detection limit is better than 0.1 mug l(-1) of Mo. The applicability of this method to analysis of seawater was assessed by the determination of molybdenum in two certified reference seawater samples (CASS-2 and NASS-2) and the comparison of the analytical results for real seawater samples (study on a vertical distribution of Mo in the seawater column) with the results obtained by Zeeman-corrected electrothermal atomization atomic absorption spectrometry (Zeeman ETAAS). A good agreement between two used methods of molybdenum determination was obtained.

Poly(2,5-dimercapto-1,3,4-thiadiazole) as a Cathode for Rechargeable Lithium Batteries with Dramatically Improved Performance

KAUST Repository

Gao, Jie; Lowe, Michael A.; Conte, Sean; Burkhardt, Stephen E.; Abruñ a, Hé ctor D.

2012-01-01

) composite cathode for lithium-ion batteries with a new method and investigated its electrochemical behavior by charge/discharge cycles and cyclic voltammetry (CV) in an ether-based electrolyte. Based on a comparison of the electrochemical performance with a

Electron transfer dynamics across self-assembled N-(2-mercaptoethyl) octadecanamide/mycolic acid layers: impedimetric insights into the structural integrity and interaction with anti-mycolic acid antibodies

CSIR Research Space (South Africa)

Ozoemena, KI

2010-01-01

Full Text Available The integrity and properties of mycolic acid (MA) antigens integrated into a self-assembled monolayer (SAM) of N-(2-mercaptoethyl)octadecanamide, (MEODA), on a gold electrode have been interrogated using cyclic voltammetry (CV) and electrochemical...

Studies on room temperature electrochemical oxidation and its effect on the transport properties of TBCCO films

International Nuclear Information System (INIS)

Shirage, P M; Shivagan, D D; Pawar, S H

2004-01-01

A novel room temperature electrochemical process for the synthesis of single-phase Tl 2 Ba 2 Ca 2 Cu 3 O 10 (TBCCO/Tl-2223) superconducting films has been developed. Electrochemical parameters were optimized by studying linear sweep voltammetry (LSV), cyclic voltammetry (CV) and chronoamperometry (CA) for the deposition of Tl-Ba-Ca-Cu alloy at room temperature. The superconducting films of the TBCCO were obtained by two oxidation techniques. In the first technique, the electrodeposited Tl-Ba-Ca-Cu alloyed films were oxidized at various temperatures in flowing oxygen atmosphere. In the second technique, stoichiometric electrocrystallization to get Tl 2 Ba 2 Ca 2 Cu 3 O 10 (Tl-2223) was completed by electrochemically intercalating oxygen species into Tl-Ba-Ca-Cu alloy at room temperature for various lengths of time. The oxygen content in the samples was varied by varying the electrochemical oxidation period, and the changes in the crystal structure, superconducting transition temperature (T c ) and critical current density (J c ) were recorded. The high temperature furnace oxidation technique was replaced by the room temperature electrochemical oxidation technique. The dependence of superconducting parameters on oxygen content is correlated with structure-property relations

MANAJEMEN RANTAI PASOKAN JAGUNG ASALAN PADA CV AMIN DI LAMPUNG TENGAH

Directory of Open Access Journals (Sweden)

Rahmad Budiono

2016-10-01

Full Text Available Salah satu komoditi palawija yang memiliki peranan yang penting di Indonesia adalah jagung, karena merupakan sumber protein dan kalori yang sangat dibutuhkan oleh ayam peternak. Pengiriman yang belum tepat waktu merupakan penyebab belum efisiennya kinerja rantai pasokan jagung. Oleh karena itu penelitian ini bertujuan untuk (1 mengidentifikasi dan mengkaji pengelolaan rantai pasokan jagung pada CV. AMIN, (2 menganalisis kinerja rantai pasokan jagung dalam hal efisiensi dan pelaksanaan kemitraan, dan (3 menganalisis alternatif kebijakan pengembangan manajemen rantai pasokan berdasarkan hasil evaluasi rantai pasokan.Penelitian akan dilakukan di CV. AMIN, Jl. Raya Merapi, Lampung Tengah dan petani mitra yang berada di kabupaten Nganjuk. Penelitian mengenai manajemen rantai pasokan Jagung tersebut dilakukan pada bulan Desember 2012 hingga Januari 2013. Pengumpulan data dilakukan dengan observasi. Responden dalam penelitian ini adalah petani jagung yang berada di Nganjuk, Pengepul, pihak CV. AMIN, dan Gudang Ternak. Penelitian dilakukan dengan metode analisis deskriptif kerangka Food Supply Chain Networking (FSCN, analisis tataniaga, dan analisis deskriptif dengan menggunakan kesesuaian atribut.

Pengaruh Kualitas Pelayanan Dan Brand Image Terhadap Loyalitas Pelanggan Melalui Kepuasan Pelanggan (Studi Kasus Pada CV. AHASS Sahabat Sejati Motor Tembalang Semarang)

OpenAIRE

Fajarianto, Bayu; Lubis, Nawazirul; Saryadi, Saryadi

2013-01-01

CV. AHASS Sahabat Sejati Motors is the official bike shop on a daily basis to serve the motorcycle repair and maintenance. In April-May 2012 has been measured by customer satisfaction Astra International Tbk Semarang district office to measure service delivery CV. AHASS Sahabat Sejati Motor to customers. As a result there are several attributes of service quality that still need to be improved to make the customer feel satisfied. The better the quality of service, the higher the level of cust...

Theoretical aspects of several successive two-step redox mechanisms in protein-film cyclic staircase voltammetry

International Nuclear Information System (INIS)

Gulaboski, Rubin; Kokoškarova, Pavlinka; Mitrev, Saša

2012-01-01

Highlights: ► Theoretical models for 2e− successive mechanisms are considered. ► The models are compatible for various metal-containing redox proteins. ► Diagnostic criteria are provided to recognize the particular redox mechanism. - Abstract: Protein-film voltammetry (PFV) is a versatile tool designed to provide insight into the enzymes physiological functions by studying the redox properties of various oxido-reductases with suitable voltammetric technique. The determination of the thermodynamic and kinetic parameters relevant to protein's physiological properties is achieved via methodologies established from theoretical considerations of various mechanisms in PFV. So far, the majority of the mathematical models in PFV have been developed for redox proteins undergoing a single-step electron transfer reactions. However, there are many oxido-reductases containing quinone moieties or polyvalent ions of transition metals like Mo, Mn, W, Fe or Co as redox centers, whose redox chemistry can be described only via mathematical models considering successive two-step electron transformation. In this work we consider theoretically the protein-film redox mechanisms of the EE (Electrochemical–Electrochemical), ECE (Electrochemical–Chemical–Electrochemical), and EECat (Electrochemical–Electrochemical–Catalytic) systems under conditions of cyclic staircase voltammetry. We also propose methodologies to determine the kinetics of electron transfer steps by all considered mechanisms. The experimentalists working with PFV can get large benefits from the simulated voltammograms given in this work.

Continuous fast Fourier transforms cyclic voltammetry as a new approach for investigation of skim milk k-casein proteolysis, a comparative study.

Science.gov (United States)

Shayeh, Javad Shabani; Sefidbakht, Yahya; Siadat, Seyed Omid Ranaei; Niknam, Kaveh

2017-10-01

Cheese production is relied upon the action of Rennet on the casein micelles of milk. Chymosin assay methods are usually time consuming and offline. Herein, we report a new electrochemical technique for studying the proteolysis of K-casein. The interaction of rennet and its substrate was studied by fast Fourier transform continuous cyclic voltammetry (FFTCCV) based on a determination of k-casein in aqueous solution. FFTCCV technique is a very useful method for studying the enzymatic procedures. Fast response, no need of modified electrodes or complex equipment is some of FFTCCV advantages. Various concentrations of enzyme and substrate were selected and the increase in the appearance of charged species in solution as a result of the addition of rennet was studied. Data obtained using FFTCCV technique were also confirmed by turbidity analysis. The results show that rennet proteolysis activity occurs in much shorter time scales compare with its aggregation. Hence, following the appearance of charged segments as a result of proteolysis could be under consideration as a rapid and online method. Copyright © 2017 Elsevier B.V. All rights reserved.

Analisis Pengaruh Kemampuan, Usaha dan Dukungan Perusahaan terhadap Kinerja Karyawan pada CV Sandang Gloria Konveksindo

Directory of Open Access Journals (Sweden)

Jerry Logahan

2012-05-01

Full Text Available Clothing Konveksindo CV Gloria is a trading company engaged in the sale of products and clothing items. Therefore, the performance of employees is very important in achieving that goal. The purpose of this study was to analyze the influence of ability, effort, and support the company towards the employee's performance CV Gloria Konveksindo Clothing. The method of analysis used in this study is descriptive, Pearson Regression, and Multiple Regression. Data obtained from the appraisal of employee performance by filling in the questionnaire that has been provided by using a Likert scale that is useful to know the degree of disagreement and agreement existing employees to the question on the questionnaire. The results achieved in this study were the ability of employees to work have an influence for 28.8% of employee performance, employee efforts in working to have the effect of 50.6% on employee performance, corporate support for work processes have the effect of 47.7% the performance of employees, while the ability of employees, employee efforts, and support the company has influence for 66.3% of the employee's performance CV Gloria Konveksindo Clothing. With this capability expected of employees, employee efforts, and support the company serve as the main factor to improve employee performance.

[Regularity of Clinical Application of Lianquan (CV 23) in Chinese Ancient Times According to Literature of Traditional Chinese Medicine].

Science.gov (United States)

Deng, Mei-Jun; Liu, Chun-Yan; Xie, Yu; Zhu, Jie-Bin; Xu, Zhen-Hua

2018-03-25

To summarize the regularity of application of Lianquan (CV 23) in clinical practice in Chinese ancient times through analysis of ancient traditional Chinese medical (TCM) literature. A total of 60 books involving CV 23 from the 1 156 ancient TCM books listed in the fifth edition of Encyclopedia of Traditional Chinese Medicine were collected by using CV 23 as the main keyword and "Sheben" "Benchi", and "Jieben" (the other names of CV 23 in TCM)as the supplementary keywords and analyzed systematically. A database was then constructed from the collected data, including the related types of disorders or symptoms, acupoint recipes, and methods of needling and moxibustion, contraindications, etc. A total of 196 articles related to the application of CV 23 from 60 ancient classical books were collected in accordance with the inclusive criteria. Among them, 155 articles are referred to the indications of CV 23, 35 to types of disorders such as asthma, cough, tongue swelling with difficulty in speaking, protracted tongue, acute contraction of tongue root, vomiting, spasm syndrome, stroke, aphtha, problems of mouth and teeth, throat problems, etc. of the internal medicine, surgery, pediatrics, and five-sense organs; 64 items are referred to the application of single CV 23, 91 to CV 23-included recipes containing 111 adjunct acupoints, and 78 to stimulation of CV 23 with acupuncture needle, moxibustion, pricking blood, and fire needle. Moreover, of the 111 adjunct acupoints, the most commonly used are Shaoshang (LU 11), Tiantu (CV 22), Hegu (LI 4), Yuye (EX-HN 13), Zhongchong (PC 9), etc. Lianquan (CV 23) is mainly used for glossopharyngeal problems chiefly by syndrome-meridian differentiation. The supplement of complementary acupoints or five-shu points in combination with CV 23 has a synergistic effect. Moxibustion (3 moxa- cones in general) is often employed, and the needling depth is usually about 7.5 mm. The common contraindication of CV 23 is severe tongue swelling.

Electrochemical Study of Hydrocarbon-Derived Electrolytes for Supercapacitors

Science.gov (United States)

Noorden, Zulkarnain A.; Matsumoto, Satoshi

2013-10-01

In this paper, we evaluate the essential electrochemical properties - capacitive and resistive behaviors - of hydrocarbon-derived electrolytes for supercapacitor application using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrolytes were systematically prepared from three hydrocarbon-derived compounds, which have different molecular structures and functional groups, by treatment with high-concentration sulfuric acid (H2SO4) at room temperature. Two-electrode cells were assembled by sandwiching an electrolyte-containing glass wool separator with two active electrodes of activated carbon sheets. The dc electrical properties of the tested cells in terms of their capacitive behavior were investigated by CV, and in order to observe the frequency characteristics of the constructed cells, EIS was carried out. Compared with the tested cell with only high-concentration H2SO4 as the electrolyte, the cell with the derived electrolytes exhibit a capacitance as high as 135 F/g with an improved overall internal resistance of 2.5 Ω. Through the use of a simple preparation method and low-cost precursors, hydrocarbon-derived electrolytes could potentially find large-scale and higher-rating supercapacitor applications.

Cloud Point Extraction for Electroanalysis: Anodic Stripping Voltammetry of Cadmium.

Science.gov (United States)

Rusinek, Cory A; Bange, Adam; Papautsky, Ian; Heineman, William R

2015-06-16

Cloud point extraction (CPE) is a well-established technique for the preconcentration of hydrophobic species from water without the use of organic solvents. Subsequent analysis is then typically performed via atomic absorption spectroscopy (AAS), UV-vis spectroscopy, or high performance liquid chromatography (HPLC). However, the suitability of CPE for electroanalytical methods such as stripping voltammetry has not been reported. We demonstrate the use of CPE for electroanalysis using the determination of cadmium (Cd(2+)) by anodic stripping voltammetry (ASV). Rather than using the chelating agents which are commonly used in CPE to form a hydrophobic, extractable metal complex, we used iodide and sulfuric acid to neutralize the charge on Cd(2+) to form an extractable ion pair. This offers good selectivity for Cd(2+) as no interferences were observed from other heavy metal ions. Triton X-114 was chosen as the surfactant for the extraction because its cloud point temperature is near room temperature (22-25 °C). Bare glassy carbon (GC), bismuth-coated glassy carbon (Bi-GC), and mercury-coated glassy carbon (Hg-GC) electrodes were compared for the CPE-ASV. A detection limit for Cd(2+) of 1.7 nM (0.2 ppb) was obtained with the Hg-GC electrode. ASV with CPE gave a 20x decrease (4.0 ppb) in the detection limit compared to ASV without CPE. The suitability of this procedure for the analysis of tap and river water samples was demonstrated. This simple, versatile, environmentally friendly, and cost-effective extraction method is potentially applicable to a wide variety of transition metals and organic compounds that are amenable to detection by electroanalytical methods.

Dopamine and uric acid electrochemical sensor based on a glassy carbon electrode modified with cubic Pd and reduced graphene oxide nanocomposite.

Science.gov (United States)

Wang, Jin; Yang, Beibei; Zhong, Jiatai; Yan, Bo; Zhang, Ke; Zhai, Chunyang; Shiraishi, Yukihide; Du, Yukou; Yang, Ping

2017-07-01

A cubic Pd and reduced graphene oxide modified glassy carbon electrode (Pd/RGO/GCE) was fabricated to simultaneously detect dopamine (DA) and uric acid (UA) by cyclic voltammetry (CV) and different pulse voltammetry (DPV) methods. Compared with Pd/GCE and RGO/GCE, the Pd/RGO/GCE exhibited excellent electrochemical activity in electrocatalytic behaviors. Performing the Pd/RGO/GCE in CV measurement, the well-defined oxidation peak potentials separation between DA and UA reached to 145mV. By using the differential pulse voltammetry (DPV) technique, the calibration curves for DA and UA were found linear with the concentration range of 0.45-421μM and 6-469.5μM and the detection limit (S/N =3) were calculated to be 0.18μM and 1.6μM, respectively. Furthermore, the Pd/RGO/GCE displayed high selectivity when it was applied into the determination of DA and UA even though in presence of high concentration of interferents. Additionally, the prepared electrochemical sensor of Pd/RGO/GCE demonstrated a practical feasibility in rat urine and serum samples determination. Copyright © 2017 Elsevier Inc. All rights reserved.

Analisis Kinerja CV. Fabamus Famili Utama Semarang Dengan Balanced Scorecard

OpenAIRE

Permata, Nilla Mega; Nugraha, Hari Susanta; Nurseto, Sendhang

2014-01-01

A method of measuring the performance of the company to assist in knowing the health condition of the company itself. The study was conducted on the CV. Fabamus First Family with Balanced Scorecard approach to measuring through four perspectives: financial perspective, customer perspective, internal business process perspective and learning and growth perspectives. In the financial aspects of performance measurement with a weight of 70%, 10% customer perspective, internal business process per...

The detection of Cd and Pb in soil solution by differential pulse anodic stripping voltammetry

Czech Academy of Sciences Publication Activity Database

Jakl, M.; Jaklová Dytrtová, J.; Šestáková, Ivana; Szaková, J.; Tlustoš, P.

2008-01-01

Roč. 102, - (2008), s. 99-100 E-ISSN 1213-7103. [International Conference on Electroanalysis /12./. 16.06.2008-19.06.2008, Prague] R&D Projects: GA ČR GA521/06/0496 Institutional research plan: CEZ:AV0Z40400503 Keywords : heavy metals * voltammetry Subject RIV: CG - Electrochemistry

Probing the electrochemical behaviour of SWCNT-cobalt nanoparticles and their electrocatalytic activities towards the detection of nitrite at acidic and physiological pH conditions

CSIR Research Space (South Africa)

Adekunle, AS

2010-05-01

Full Text Available was confirmed by field emission scanning electron microscopy (FESEM), AFM and EDX techniques. The electron transfer behavior of the modified electrodes was investigated in [Fe (CN)6]3-/4- redox probe using cyclic voltammetry (CV) and electrochemical impedance...

Electrochemical and spectroscopic studies of the complexed species of models of nitrohumic acids derived from phthalic acid

Directory of Open Access Journals (Sweden)

Mercê Ana Lucia Ramalho

1998-01-01

Full Text Available The study of model compounds is necessary in order to obtain information about complex organic substances as in the case of humic substances (HS. These substances are potential organic fertilizers and have other important functions in soils, natural waters and organic sediments. The main chemical properties of the complexes formed from 3-nitrophthalic and 4-nitrophthalic acids and the metal ions Fe(III and Zn(II were studied using potentiometric titrations, ultraviolet-visible spectroscopy (UV-Vis and cyclic voltammetry (CV. A trial potentiometric titration was done with a mixture of the models for nitrohumic acids and Cu(II. Equilibrium constants for the systems were calculated and UV-Vis and CV were employed to monitor the formation of the species. Comparative studies involving chelating centres of nitrosalicylic acids and nitrocatechols with Fe(III, Zn(II and Cu(II are presented. The initial studies involving the nitrohumic substances (NHS, a laboratory artifact of HS have been made and good evidence was found for the further use of NHS as a potential organic fertilizer as well as HS. In this present work one of the observed advantages of NHS over HS was that some aromatic nitro- centres can bind some metal ions at p[H] values of normal soils, near 7.0 to 7.5.

Electrochemical behavior of folic acid at calixarene based chemically modified electrodes and its determination by adsorptive stripping voltammetry

International Nuclear Information System (INIS)

Vaze, Vishwanath D.; Srivastava, Ashwini K.

2007-01-01

Voltammetric behavior of folic acid at plain carbon paste electrode and electrode modified with calixarenes has been studied. Two peaks for irreversible oxidation were observed. Out of the three calixarenes chosen for modification of the electrodes, p-tert-butyl-calix[6]arene modified electrode (CME-6) was found to have better sensitivity for folic acid. Chronocoulometric and differential pulse voltammetric studies reveal that folic acid can assemble at CME-6 to form a monolayer whose electron transfer rate is 0.00273 s -1 with 2-electron/2-proton transfer for the peak at +0.71 V against SCE. An adsorption equilibrium constant of 5 x 10 3 l/mol for maximum surface coverage of 2.89 x 10 -10 mol/cm 2 was obtained. The current is found to be rectilinear with concentration by differential pulse voltammetry. However, linearity in the lower range of concentration 8.79 x 10 -12 M to 1.93 x 10 -9 M with correlation coefficient of 0.9920 was achieved by adsorptive stripping voltammetry. The limit of detection obtained was found to be 1.24 x 10 -12 M. This method was used for the determination of folic acid in a variety of samples, viz. serum, asparagus, spinach, oranges and multivitamin preparations

Electrochemical behavior of folic acid at calixarene based chemically modified electrodes and its determination by adsorptive stripping voltammetry

Energy Technology Data Exchange (ETDEWEB)

Vaze, Vishwanath D. [Department of Chemistry, University of Mumbai, Vidyanagari, Santacruz (East), Mumbai 400098 (India); Srivastava, Ashwini K. [Department of Chemistry, University of Mumbai, Vidyanagari, Santacruz (East), Mumbai 400098 (India)], E-mail: aksrivastava@chem.mu.ac.in

2007-12-31

Voltammetric behavior of folic acid at plain carbon paste electrode and electrode modified with calixarenes has been studied. Two peaks for irreversible oxidation were observed. Out of the three calixarenes chosen for modification of the electrodes, p-tert-butyl-calix[6]arene modified electrode (CME-6) was found to have better sensitivity for folic acid. Chronocoulometric and differential pulse voltammetric studies reveal that folic acid can assemble at CME-6 to form a monolayer whose electron transfer rate is 0.00273 s{sup -1} with 2-electron/2-proton transfer for the peak at +0.71 V against SCE. An adsorption equilibrium constant of 5 x 10{sup 3} l/mol for maximum surface coverage of 2.89 x 10{sup -10} mol/cm{sup 2} was obtained. The current is found to be rectilinear with concentration by differential pulse voltammetry. However, linearity in the lower range of concentration 8.79 x 10{sup -12} M to 1.93 x 10{sup -9} M with correlation coefficient of 0.9920 was achieved by adsorptive stripping voltammetry. The limit of detection obtained was found to be 1.24 x 10{sup -12} M. This method was used for the determination of folic acid in a variety of samples, viz. serum, asparagus, spinach, oranges and multivitamin preparations.

Probing Electrode Heterogeneity Using Fourier-Transformed Alternating Current Voltammetry: Application to a Dual-Electrode Configuration.

Science.gov (United States)

Tan, Sze-Yin; Unwin, Patrick R; Macpherson, Julie V; Zhang, Jie; Bond, Alan M

2017-03-07

Quantitative studies of electron transfer processes at electrode/electrolyte interfaces, originally developed for homogeneous liquid mercury or metallic electrodes, are difficult to adapt to the spatially heterogeneous nanostructured electrode materials that are now commonly used in modern electrochemistry. In this study, the impact of surface heterogeneity on Fourier-transformed alternating current voltammetry (FTACV) has been investigated theoretically under the simplest possible conditions where no overlap of diffusion layers occurs and where numerical simulations based on a 1D diffusion model are sufficient to describe the mass transport problem. Experimental data that meet these requirements can be obtained with the aqueous [Ru(NH 3 ) 6 ] 3+/2+ redox process at a dual-electrode system comprised of electrically coupled but well-separated glassy carbon (GC) and boron-doped diamond (BDD) electrodes. Simulated and experimental FTACV data obtained with this electrode configuration, and where distinctly different heterogeneous charge transfer rate constants (k 0 values) apply at the individual GC and BDD electrode surfaces, are in excellent agreement. Principally, because of the far greater dependence of the AC current magnitude on k 0 , it is straightforward with the FTACV method to resolve electrochemical heterogeneities that are ∼1-2 orders of magnitude apart, as applies in the [Ru(NH 3 ) 6 ] 3+/2+ dual-electrode configuration experiments, without prior knowledge of the individual kinetic parameters (k 0 1 and k 0 2 ) or the electrode size ratio (θ 1 :θ 2 ). In direct current voltammetry, a difference in k 0 of >3 orders of magnitude is required to make this distinction.

Comportamiento electroquímico de un electrodo de oro modificado con una monocapa autoensamblada del ácido 2-N-bencil-1- ciclopenten-di-tiocarboxílico

Directory of Open Access Journals (Sweden)

R.R. Contreras

2009-01-01

Full Text Available The study of coverage (nmol/cm-2 of N-bencyl-1-cyclopenten-di-thiocarboxylic acid (novel compound depending on the immersion time of the gold electrode in a solution of the mentioned compound, as well as the characterization of the adsorbed monolayer has been carried out by cyclic voltammetry (CV. The self assembled monolayer (SAM has been tested for stability in defined potential intervals and blocking properties for electron transfer [Fe(CN6]3-/[Fe(CN6]4- and Cu(II. Detection and quantifying of copper by stripping of underpotential deposits and by stripping of bulk deposition formed at the modified gold electrode was carried out by square wave voltammetry (SWV in copper-free phosphate buffer.

Solution NMR Structure of Hypothetical Protein CV_2116 Encoded by a Viral Prophage Element in Chromobacterium violaceum

Directory of Open Access Journals (Sweden)

Yunhuang Yang

2012-06-01

Full Text Available CV_2116 is a small hypothetical protein of 82 amino acids from the Gram-negative coccobacillus Chromobacterium violaceum. A PSI-BLAST search using the CV_2116 sequence as a query identified only one hit (E = 2e⁻⁰⁷ corresponding to a hypothetical protein OR16_04617 from Cupriavidus basilensis OR16, which failed to provide insight into the function of CV_2116. The CV_2116 gene was cloned into the p15TvLic expression plasmid, transformed into E. coli, and ¹³C- and ¹⁵N-labeled NMR samples of CV_2116 were overexpressed in E. coli and purified for structure determination using NMR spectroscopy. The resulting high-quality solution NMR structure of CV_2116 revealed a novel α + β fold containing two anti-parallel β -sheets in the N-terminal two-thirds of the protein and one α-helix in the C-terminal third of the protein. CV_2116 does not belong to any known protein sequence family and a Dali search indicated that no similar structures exist in the protein data bank. Although no function of CV_2116 could be derived from either sequence or structural similarity searches, the neighboring genes of CV_2116 encode various proteins annotated as similar to bacteriophage tail assembly proteins. Interestingly, C. violaceum exhibits an extensive network of bacteriophage tail-like structures that likely result from lateral gene transfer by incorporation of viral DNA into its genome (prophages due to bacteriophage infection. Indeed, C. violaceum has been shown to contain four prophage elements and CV_2116 resides in the fourth of these elements. Analysis of the putative operon in which CV_2116 resides indicates that CV_2116 might be a component of the bacteriophage tail-like assembly that occurs in C. violaceum.

Guidelines on CV networking information flow optimization for Texas.

Science.gov (United States)

2017-03-01

Recognizing the fundamental role of information flow in future transportation applications, the research team investigated the quality and security of information flow in the connected vehicle (CV) environment. The research team identified key challe...

Comportamento agronômico inicial da cv. Chimarrita enxertada em cinco porta-enxertos de pessegueiro Agronomical behavior of cv. Chimarrita on five rootstocks of peach trees

Directory of Open Access Journals (Sweden)

Moacir da Silva Rocha

2007-01-01

Full Text Available O trabalho teve por objetivo avaliar a resposta agronômica da cv. Chimarrita enxertada em cinco porta-enxertos, nas condições edafoclimáticas da região de Pelotas-RS, no período de 2003 a 2005. Durante o período de execução do experimento, foram avaliados o diâmetro do tronco do porta-enxerto e da cultivar-copa, comprimento médio dos ramos principais, volume de copa, massa fresca e massa seca do material vegetal retirado nas podas verde e de inverno, índice de intensidade de poda, massa média dos frutos, produção por planta, eficiência produtiva, produção por hectare, sólidos solúveis totais, firmeza da polpa, diâmetro e coloração dos frutos. O porta-enxerto 'Capdeboscq' induziu o maior crescimento vegetativo na cv. Chimarrita durante os três anos de avaliação, seguido do porta-enxerto 'Okinawa'. Este, por sua vez, induziu o maior rendimento produtivo (1,65 t ha-1. A cv. Capdeboscq proporcionou a obtenção de frutos com maior massa. Os porta-enxertos 'GF 305' e 'Aldrighi' induziram menor desenvolvimento vegetativo e a mais baixa produtividade (0,52 t.ha-1 .The objective for this study was to evaluate the agronomical behavior of cv. Chimarrita on five rootstocks of peach trees in Pelotas- RS from 2003 to 2005. The variables evaluated were: trunk diameters of the rootstock and of the scion; length of the annual terminal growth; volume of the canopy; fresh and dry weight of the material taken by the summer and winter pruning; pruning intensity index; fruit weight; fruit production per tree; production efficiency; productivity per hectare; total soluble solids; pulp firmness; and fruit diameter and color. It was observed that the trees from: rootstock 'Capdeboscq' promoted higher vegetative growth and larger fruits, followed by the ones from the rootstock 'Okinawa' which promoted the highest yield (1, 65 t.ha-1; the rootstock 'GF 305' and 'Aldrighi' had the lowest vegetative development and yield (0, 52 t.ha-1.

Programación de Aplicaciones OpenCV sobre Sistemas Heterogéneos SoC-FPGA

OpenAIRE

Sanchis Cases, Francisco José

2014-01-01

OpenCV es una biblioteca de primitivas de procesado de imagen que permite crear algoritmos de Visión por Computador de última generación. OpenCV fue desarrollado originalmente por Intel en 1999 para mostrar la capacidad de procesamiento de los micros de Intel, por lo que la mayoría de la biblioteca está optimizada para correr en estos micros, incluyendo las extensiones MMX y SSE. http://en.wikipedia.org/wiki/OpenCV. Actualmente es ampliamente utilizada tanto por la comunidad científica como p...

Electrochemical Comparison of the Interaction of 5-Nitrouracil with Single- or Double-Stranded DNA at mercury and glassy carbon electrodes

OpenAIRE

Ibrahim, Mohamed Sayed; Ibrahim, Hossieny Sameh Mohamed; Kamal, Moustafa Mohamed; Temerk, Yassin Mohamed

2014-01-01

The interaction of the 5-Nitrouracil (5NU), with ss-, and ds-DNA was investigated electrochemically in absence and presence of copper ions by using cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV) at hanging mercury drop electrode (HMDE) and glassy carbon electrode (GCE) surfaces. It was found that, in absence of copper ions, the addition of ss- or ds-DNA to a buffered solution of 5NU results in a decrease on the 5NU redox peak current with a remarkable change in th...

Electrochemical evaluation of sweet sorghum fermentable sugar bioenergy feedstock

Science.gov (United States)

Redox active constituents of sorghum, e.g., anthocyanin, flavonoids, and aconitic acid, putatively contribute to its pest resistance. Electrochemical reactivity of sweet sorghum stem juice was evaluated using cyclic voltammetry (CV) for five male (Atlas, Chinese, Dale, Isidomba, N98) and three fema...

Electrosynthesised metal (Ni, Fe, Co) oxide films on single-walled carbon nanotube platforms and their supercapacitance in acidic and neutral pH media

CSIR Research Space (South Africa)

Adekunle, AS

2011-07-01

Full Text Available of the modified electrodes in H2SO4 and Na2SO4 electrolytes was investigated using cyclic voltammetry (CV), galvanostatic constant current charge-discharge (CD) and the electrochemical impedance spectroscopy (EIS) techniques. SWCNT-NiO nanocomposite modified...

High floral bud abscission and lack of open flower abscission in Dendrobium cv. Miss Teen: rapid reduction of ethylene sensitivity in the abscission zone

NARCIS (Netherlands)

Bunya-atichart, K.; Ketsa, S.; Doorn, van W.G.

2006-01-01

We studied the abscission of floral buds and open flowers in cut Dendrobium inflorescences. Abscission of floral buds was high and sensitive to ethylene in all cultivars studied. Many open flowers abscised in most cultivars, but cv. Willie exhibited only small amount of floral fall and cv. Miss Teen

Poly(malachite green) at nafion doped multi-walled carbon nanotube composite film for simple aliphatic alcohols sensor.

Science.gov (United States)

Umasankar, Yogeswaran; Periasamy, Arun Prakash; Chen, Shen-Ming

2010-01-15

Conductive composite film which contains nafion (NF) doped multi-walled carbon nanotubes (MWCNTs) along with the incorporation of poly(malachite green) (PMG) has been synthesized on glassy carbon electrode (GCE), gold and indium tin oxide (ITO) electrodes by potentiostatic methods. The presence of MWCNTs in the composite film (MWCNTs-NF-PMG) enhances surface coverage concentration (Gamma) of PMG to approximately 396%, and increases the electron transfer rate constant (k(s)) to approximately 305%. Similarly, electrochemical quartz crystal microbalance study reveals the enhancement in the deposition of PMG at MWCNTs-NF film. The surface morphology of the composite film deposited on ITO electrode has been studied using scanning electron microscopy (SEM) and scanning tunneling microscopy (STM). These two techniques reveal that the PMG incorporated on MWCNTs-NF film. The MWCNTs-NF-PMG composite film also exhibits promising enhanced electrocatalytic activity towards the simple aliphatic alcohols such as methanol, ethanol and propanol. The electroanalytical responses of analytes at NF-PMG and MWCNTs-NF-PMG films were measured using both cyclic voltammetry (CV) and differential pulse voltammetry (DPV). From electroanalytical studies, well defined voltammetric peaks have been obtained at MWCNTs-NF-PMG composite film for methanol, ethanol and propanol at Epa=609, 614 and 602mV respectively. The sensitivity of MWCNTs-NF-PMG composite film towards methanol, ethanol and propanol in CV technique are 0.59, 0.36 and 0.92microAmM(-1)cm(-2) respectively, which are higher than NF-PMG film. Further, the sensitivity values obtained using DPV are higher than the values obtained using CV technique.

Quasi-steady-state voltammetry of rapid electron transfer reactions at the macroscopic substrate of the scanning electrochemical microscope.

Science.gov (United States)

Nioradze, Nikoloz; Kim, Jiyeon; Amemiya, Shigeru

2011-02-01

We report on a novel theory and experiment for scanning electrochemical microscopy (SECM) to enable quasi-steady-state voltammetry of rapid electron transfer (ET) reactions at macroscopic substrates. With this powerful approach, the substrate potential is cycled widely across the formal potential of a redox couple while the reactant or product of a substrate reaction is amperometrically detected at the tip in the feedback or substrate generation/tip collection mode, respectively. The plot of tip current versus substrate potential features the retraceable sigmoidal shape of a quasi-steady-state voltammogram although a transient voltammogram is obtained at the macroscopic substrate. Finite element simulations reveal that a short tip-substrate distance and a reversible substrate reaction (except under the tip) are required for quasi-steady-state voltammetry. Advantageously, a pair of quasi-steady-state voltammograms is obtained by employing both operation modes to reliably determine all transport, thermodynamic, and kinetic parameters as confirmed experimentally for rapid ET reactions of ferrocenemethanol and 7,7,8,8-tetracyanoquinodimethane at a Pt substrate with ∼0.5 μm-radius Pt tips positioned at 90 nm-1 μm distances. Standard ET rate constants of ∼7 cm/s were obtained for the latter mediator as the largest determined for a substrate reaction by SECM. Various potential applications of quasi-steady-state voltammetry are also proposed.

Ferrocene-based guanidine derivatives: in vitro antimicrobial, DNA binding and docking supported urease inhibition studies.

Science.gov (United States)

Gul, Rukhsana; Rauf, Muhammad Khawar; Badshah, Amin; Azam, Syed Sikander; Tahir, Muhammad Nawaz; Khan, Azim

2014-10-06

Some novel ferrocenyl guanidines 1-8 were synthesized and characterized by different spectroscopic methods, elemental analysis and single crystal X-rays diffraction techniques. The crystallographic studies revealed that the existence of the strong non-bonding interactions facilitate these molecules to interact with biological macro-molecules like DNA that described to inherit good biological activities. The DNA interaction studies carried out by cyclic voltammetry (CV) and UV-visible spectroscopy are in close agreement with the binding constants (K) (0.79-5.4) × 10(5) (CV) and (0.72-5.1) × 10(5) (UV-vis). The shift in peak potential, current and absorption maxima of the studied ferrocenyl guanidines in the presence of DNA revealed that CV coupled with UV-vis spectroscopy could provide an opportune to characterize metal-based compounds-DNA interaction mechanism, a prerequisite for the design of new anticancer agents and understanding the molecular basis of their action. The compounds 1-8 have been screened for their antibacterial, antifungal and urease inhibition potency. A concurrent in silico study has also been applied on ferrocene moiety impregnated guanidines 1-8 to identify most active compounds having for inhibiting the activity of urease (pdb id 3LA4). Most of the compounds were found as potent inhibitors of urease and the compound 1 was found to be the most active with an IC50 of 16.83 ± 0.03 μM. The docking scores are in close agreement with the in vitro obtained IC50 values of inhibitors 1-8. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Automatic tracking of red blood cells in micro channels using OpenCV

Science.gov (United States)

Rodrigues, Vânia; Rodrigues, Pedro J.; Pereira, Ana I.; Lima, Rui

2013-10-01

The present study aims to developan automatic method able to track red blood cells (RBCs) trajectories flowing through a microchannel using the Open Source Computer Vision (OpenCV). The developed method is based on optical flux calculation assisted by the maximization of the template-matching product. The experimental results show a good functional performance of this method.

Study of the activation of the parts components of the CV-28 cyclotron

International Nuclear Information System (INIS)

Fajardo, P.W.

1986-08-01

The CV-17 cyclotron, isochronous, compact, of variable energy is an accelerator of charged particles and is applied in several situations such as: radioisotopes production, neutron production, irradiation damage analysis, activation analysis. During the production of the particle beams, the parts components of the interior of the cyclotron are irradiated and become radioactive. Due the fact of the cyclotron require maintenance, the knowledgement of the radionuclides present is of primordial importance of the view point of the radioprotection. Taking the excitation function of a nuclear reaction is observed that determined reaction may happen and produce a radionuclide. The radionuclides formed in the parts components by charged particles are presented. (V.R.B.)

An improved technique for quasi-static C-V measurements

International Nuclear Information System (INIS)

Turan, R.; Finstad, T.G.

1990-10-01

A new automated quasi-static C-V measurement technique for MOS capacitors has been developed. This techniques uses an integrating electrometer to measure the charge accumulated on a MOS capacitor in response of a small voltage step. Making use of the internal data storage system of a commercial electrometer and a personal computer, the charge Q on the MOS capacitor is measured as a function of time t and stored. The capacitance is then obtained by analyzing this Q-t data set. A Si MOS sample is measured and analyzed in terms of interface charges as an example. Advantages over a commercial quasi-static meter which uses similar measurement technique are presented. It is also shown that this technique is potentially capable of measuring both high and low frequency C-V curves simultaneously. 9 refs. 5 figs

VibroCV: a computer vision-based vibroarthrography platform with possible application to Juvenile Idiopathic Arthritis.

Science.gov (United States)

Wiens, Andrew D; Prahalad, Sampath; Inan, Omer T

2016-08-01

Vibroarthrography, a method for interpreting the sounds emitted by a knee during movement, has been studied for several joint disorders since 1902. However, to our knowledge, the usefulness of this method for management of Juvenile Idiopathic Arthritis (JIA) has not been investigated. To study joint sounds as a possible new biomarker for pediatric cases of JIA we designed and built VibroCV, a platform to capture vibroarthrograms from four accelerometers; electromyograms (EMG) and inertial measurements from four wireless EMG modules; and joint angles from two Sony Eye cameras and six light-emitting diodes with commercially-available off-the-shelf parts and computer vision via OpenCV. This article explains the design of this turn-key platform in detail, and provides a sample recording captured from a pediatric subject.

Analysis of low concentration of free ferric oxides in clays by vis diffuse reflectance spectroscopy and voltammetry

Czech Academy of Sciences Publication Activity Database

Grygar, Tomáš; Dědeček, Jiří; Hradil, David

2002-01-01

Roč. 53, č. 2 (2002), s. 71-77 ISSN 0016-7738 R&D Projects: GA ČR GA205/00/1349 Institutional research plan: CEZ:AV0Z4032918 Keywords : voltammetry * Vis spectroscopy * analysis Subject RIV: CA - Inorganic Chemistry

Crystallic silver amalgam--a novel electrode material.

Science.gov (United States)

Danhel, Ales; Mansfeldova, Vera; Janda, Pavel; Vyskocil, Vlastimil; Barek, Jiri

2011-09-21

A crystallic silver amalgam was found to be a suitable working electrode material for voltammetric determination of electrochemically reducible organic nitro-compounds. Optimum conditions for crystal growth were found, the crystal surface was investigated by atomic force microscopy in tapping mode and single crystals were used for the preparation of quasi-cylindrical single crystal silver amalgam electrode (CAgAE). An electrochemical behavior of this alternative electrode material was investigated in aqueous media by direct current voltammetry, cyclic voltammetry (CV), differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) using 4-nitrophenol as a model compound. Applicable potential windows of the CAgAE were found comparable with those obtained at a hanging mercury drop electrode, providing high hydrogen overpotential, and polished silver solid amalgam electrode. Thanks to the smooth single crystal electrode surface, the effect of the passivation is not too pronounced, direct DPV determination of 100 μmol l(-1) of 4-nitrophenol at CAgAEs in 0.2 mol l(-1) acetate buffer pH 4.8 provides a RSD around 1.5% (n = 15). DPV calibration curves of 4-nitrophenol are linear in the whole concentration range 1-100 μmol l(-1) with a limit of quantification of 1.5 μmol l(-1). The attempt to increase sensitivity by application of AdSV was not successful. The mechanism of 4-nitrophenol reduction at CAgAE was investigated by CV.

Comparison of adsorptive with extractive stripping voltammetry in electrochemical determination of retinol

Directory of Open Access Journals (Sweden)

Milan Sýs

2017-01-01

Full Text Available Adsorptive stripping voltammetry (AdSV of retinol at solid glassy carbon electrode (GCE, carbon paste electrode (CPE covered by thin layer of multi-wall carbon nanotubes (CPE/MWCNTs and carbon paste electrode covered by thin layer of single layer graphene (CPE/Graphene was compared with an extractive stripping voltammetry (ExSV into silicone oil (SO as lipophilic binder of glassy carbon paste electrode (GCPE. All types of selected working electrodes were characterized by a scanning electron microscopy to determine overall morphology of electrode surfaces together with spatial arrangement of used carbon particles. The retinol, also known as vitamin A1, was chosen as a model analyte because it is the most biologically active representative of retinoids which are classified as a significant group of lipophilic vitamins. Based on this comparison, it was observed that electrochemical method with high sensitivity (ExSV at GPCE is generally characterized by shorter linear range of the calibration curve than in case of AdSV at CPE/MWCNTs or CPE/Graphene. Unlike AdSV at solid GCE, all other tested electrochemical methods could represent suitable analytical tools for monitoring of retinoids in different types of foodstuffs. Especially, content of retinol up to tenths milligrams can be easily determined using ExSV. Additionally, negative interference of chemical species present in real samples is minimal in comparison with direct voltammetric methods performed in supporting electrolytes based on organic solvents due to application of accumulation step in "ex-situ" mode.

Simulation of square wave voltammetry of three electrode reactions coupled by two reversible chemical reactions

OpenAIRE

Lovrić, Milivoj

2017-01-01

Three fast and reversible electrode reactions that are connected by two reversible chemical reactions that are permanently in the equilibrium are analysed theoretically for square wave voltammetry. The dependence of peak potentials on the dimensionless equilibrium constants of chemical reactions is calculated. The influence of the basic thermodynamic parameters on the square wave voltammetric responses is analysed.

Storage and methyl jasmonate in postharvest conservation of roses cv. Avalanche

Directory of Open Access Journals (Sweden)

Elka Fabiana Aparecida Almeida

2017-07-01

Full Text Available The use of methyl jasmonate has demonstrated its efficiency to extend the vase life of cut flowers. The objective of this study was to evaluate the effect of methyl jasmonate associated with storage at low temperatures on the postharvest quality of Rosa cv. Avalanche stems. The treatments consisted of 125, 250, 500 and 1000 μM of methyl jasmonate, besides the control with distilled water. The flower buds were sprayed with 4 mL of the solution, according to the treatments, and then kept in a cold chamber (1 °C for periods of 2 and 6 days. Subsequently, the stems were taken to the postharvest laboratory at a temperature of 16 °C. Better quality, higher fresh weight and water absorption were observed in flower stems stored for 2 days. The application of methyl jasmonate caused less turgescence and greater darkening of roses. It was possible to conclude that two days is the best storage time at 1 °C and the use of methyl jasmonate does not maintain the quality of roses cv. Avalanche after harvest.

Determination of band structure parameters and the quasi-particle gap of CdSe quantum dots by cyclic voltammetry.

Science.gov (United States)

Inamdar, Shaukatali N; Ingole, Pravin P; Haram, Santosh K

2008-12-01

Band structure parameters such as the conduction band edge, the valence band edge and the quasi-particle gap of diffusing CdSe quantum dots (Q-dots) of various sizes were determined using cyclic voltammetry. These parameters are strongly dependent on the size of the Q-dots. The results obtained from voltammetric measurements are compared to spectroscopic and theoretical data. The fit obtained to the reported calculations based on the semi-empirical pseudopotential method (SEPM)-especially in the strong size-confinement region, is the best reported so far, according to our knowledge. For the smallest CdSe Q-dots, the difference between the quasi-particle gap and the optical band gap gives the electron-hole Coulombic interaction energy (J(e1,h1)). Interband states seen in the photoluminescence spectra were verified with cyclic voltammetry measurements.

Comparative DEMS study on the electrochemical oxidation of carbon blacks

DEFF Research Database (Denmark)

Ashton, Sean James; Arenz, Matthias

2012-01-01

Publication year: 2012 Source:Journal of Power Sources, Volume 217 Sean J. Ashton, Matthias Arenz The intention of the study presented here is to compare the electrochemical oxidation tendencies of a pristine Ketjen Black EC300 high surface area (HSA) carbon black, and four graphitised counterparts...... heat-treated between 2100 and 3200 °C, such as those typically used as corrosion resistant carbon (CRC) supports for polymer electrolyte membrane fuel cell (PEMFC) catalysts. A methodology combining cyclic voltammetry (CV) and differential electrochemical mass spectrometry (DEMS) is used, which allows......; however, CRC samples graphitised =2800 °C did not exhibit this same behaviour. Highlights ¿ We quantitatively determine electrooxidation of carbon support materials. ¿ We can distinguish between the total and partial electrooxidation. ¿ Non or mildly heat treated carbon forms passivating layer. ¿ Heat...

Electrochemical oxidation and detection of sodium urate in alkaline ...

African Journals Online (AJOL)

Electrochemical behaviour of copper oxides electrode in the presence of sodium urate was investigated. The correlation between the anodic oxidation and the amperometric detection of sodium urate in the alkaline medium on copper oxides electrode was analysed by cyclic voltammetry (CV) and electrochemical ...

Vigor tests to evaluate the physiological quality of corn seeds cv. 'Sertanejo'

Directory of Open Access Journals (Sweden)

Daniela Vieira dos Anjos Sena

Full Text Available ABSTRACT: The vigor tests are intended to monitor the quality of seeds as it allows reliably distinguish lots of low and high vigor, providing additional information to the germination test. So in this study the objective was to identify the most efficient vigor tests on stratification of lots of corn seeds cv. 'Sertanejo'. The experiment was conducted at Laboratory of Seed Analysis at the Center of agricultural Science of the Universidade Federal da Paraíba, using samples from 20 seed lots in a completely randomized design. For characterization of the lots it was evaluated water content, germination and vigor (cold test, electrical conductivity, accelerated aging, seedling emergence in field and germination at low temperatures. The accelerated aging, electrical conductivity and field emergence of seedlings tests are the most efficient for classification of lots of corn seeds cv. 'Sertanejo' in levels of vigor, been the seeds of lot 1 the most vigorous.

Efeito de reguladores de crescimento em uva apirênica, cv. BRS Clara Effect of growth regulators on the seedless grape cv. BRS Clara

Directory of Open Access Journals (Sweden)

Jair Costa Nachtigal

2005-08-01

Full Text Available O presente trabalho teve por objetivo verificar o efeito da aplicação de diferentes concentrações do ácido giberélico (AG3, do thidiazuron (TDZ e do forchlorfenuron (CPPU no aumento do tamanho dos cachos e das bagas e no teor de sólidos solúveis totais de uva sem semente, cv. BRS Clara. As plantas foram conduzidas no sistema de latada, sobre o porta-enxerto IAC 572, no espaçamento 2,5 x 2,0m e com irrigação por microaspersão. Os experimentos foram conduzidos na Estação Experimental de Viticultura Tropical, da Embrapa Uva e Vinho, em Jales-SP. Os reguladores de crescimento foram aplicados via pulverização localizada no cacho, utilizando-se de concentrações de 0 a 4mg.L-1 de CPPU; 0 a 10mg.L-1 de TDZ, e de 0 a 90mg.L-1 de AG3, isolados ou em conjunto. De modo geral, a aplicação dos reguladores de crescimento promove a melhoria da qualidade dos cachos da cv. BRS Clara; o uso do TDZ e do CPPU em conjunto com o AG3 produz um efeito sinérgico, proporcionando melhor resposta do que o uso isolado do AG3; os tratamentos com 60mg.L-1 de AG3; 20mg.L-1 de AG3 + 4mg.L-1 de CPPU, e 10mg.L-1 de AG3 + 5mg.L-1 de TDZ proporcionam os melhores resultados para o aumento do diâmetro das bagas; a aplicação de AG3 antes da floração da cv. BRS Clara provoca abortamento excessivo, reduzindo a qualidade comercial dos cachos; a utilização de concentrações elevadas dos reguladores reduz o teor de sólidos solúveis totais.The objective of this study was to evaluate the effect of different concentrations of gibberellic acid (AG3, thidiazuron (TDZ and forchlorfenuron (CPPU on the size of bunches and berries and on the total soluble solids content, when applied in different concentrations on the seedless grapes, cv. BRS Clara. The grapevines were grafted on the rootstock IAC 572, trained in the pergola system and, spaced 2.5 x 2.0m and irrigated by micro sprinklers. The experiments were carried out at the Embrapa Grape and Wine Experimental

Immobilization of enzymatic extracts of Portulaca oleracea cv. roots for oxidizing aqueous bisphenol A.

Science.gov (United States)

Matsushima, Kazuki; Kaneda, Hirokazu; Harada, Kazuo; Matsuura, Hideyuki; Hirata, Kazumasa

2015-05-01

Water pollution from the release of industrial wastewater is a serious problem for almost every industry. Enzymes from portulaca, Portulaca oleracea cv., have been investigated for their ability to degrade bisphenol A (BPA), one of the well-known estrogenic pollutants. Enzymatic crude extracts from P. oleracea cv. roots were immobilized on aminopropyl-modified glass beads. They maintained BPA metabolic activity over a broad range of pH values and temperatures. The immobilized enzyme was reusable with more than 50 % of its initial activity retained after 12 batch reactions and no loss of activity after storage for 1 month at -30 °C. Thus, the immobilization of extracts from P. oleracea cv. roots is a useful method for removing BPA from industrial wastewater.

Dependence of adenine isolation efficiency on the chain length evidenced using paramagnetic particles and voltammetry measurements

International Nuclear Information System (INIS)

Huska, Dalibor; Adam, Vojtech; Trnkova, Libuse; Kizek, Rene

2009-01-01

The main aim of this work was to study the dependence of oligoadenine isolation efficiency on the chain length by using paramagnetic particles covered by homo-deoxythymidines ((dT)25) with subsequent detection by adsorptive transfer technique coupled with square wave voltammetry. For this purpose, the oligonucleotides of the length A5, A10, A15, A20, A25, A30, A35, A40 and poly(A) in various concentrations were chosen. We determined that the isolation efficiency defined as 'isolated oligonucleotide concentration'/'given oligonucleotide concentration' was about 55% on average. Sequence A25 demonstrated the best binding onto microparticles surface.

Molecularly imprinted polymer based electrochemical detection of L-cysteine at carbon paste electrode.

Science.gov (United States)

Aswini, K K; Vinu Mohan, A M; Biju, V M

2014-04-01

A methacrylic acid (MAA) based molecularly imprinted polymer (MIP) modified carbon paste electrode (CPE) was developed for electrochemical detection of L-cysteine (Cys). Characterisation of MIP was done with FTIR and the modified electrode with cyclic voltammetry (CV) and differential pulse voltammetry (DPV). CV, DPV and impedance analysis demonstrated that the modified electrode is responsive towards the target molecule. The optimum percentage composition of MIP for MIP/CPE and the effect of pH towards the electrode response for Cys were studied. The detection of Cys in the range of 2×10(-8) to 18×10(-8)M at MIP/CPE was monitored by DPV with a limit of detection of 9.6nM and R(2) of 0.9974. Also, various physiological interferents such as ascorbic acid, L-tryptophan, D-glucose, D-cysteine and L-cysteine were found to have little effect on DPV response at MIP/CPE. The utility of the electrode was proved by the effective detection of Cys from tap water and human blood plasma samples with reproducible results. Copyright © 2014 Elsevier B.V. All rights reserved.

Electrochemical determination of morin in Kiwi and Strawberry fruit samples using vanadium pentoxide nano-flakes.

Science.gov (United States)

Sasikumar, Ragu; Govindasamy, Mani; Chen, Shen-Ming; Chieh-Liu, Yu; Ranganathan, Palraj; Rwei, Syang-Peng

2017-10-15

Herein, we report the synthesis of Vanadium Pentoxide Nanoflakes (V 2 O 5 NF) using ionic liquid and employed the V 2 O 5 NF in electrochemical determination of Morin (MR) in fruit samples. The V 2 O 5 NF were characterized by Powder X-ray diffraction (PXRD), scanning electron microscope (SEM), energy-dispersive X-ray analyzer (EDX), differential pulse voltammetry (DPV), and cyclic voltammetry (CV). Remarkably, the as-synthesized V 2 O 5 NF exhibited excellent electrochemical behavior and electrochemical ability towards MR. The CV and DPV studies were recognized that the electrochemical performance of V 2 O 5 NF film modified glassy carbon electrode (V 2 O 5 NF/GCE) towards detection of MR is outstanding in comparison with unmodified GCE. The proposed MR sensor shows a wide linear range, high sensitivity, and low limit of detection are 0.05-10.93μm, 1.130μAμM -1 cm -2 , and 9nM respectively. The fabulous analytical parameters of the developed sensor surpassed the previously reported modified electrodes, rendering the potential application of V 2 O 5 NF in environmental, biomedical, and pharmaceutical samples. Copyright © 2017. Published by Elsevier Inc.

An investigation of drug binding ability of a surface active ionic liquid: micellization, electrochemical, and spectroscopic studies.

Science.gov (United States)

Mahajan, Suruchi; Sharma, Rabia; Mahajan, Rakesh Kumar

2012-12-18

Keeping in view the use of surfactants in drug delivery, the interactions of surface active ionic liquids, such as 1-tetradecyl-3-methylimidazolium bromide (C(14)mimBr), with drugs, viz., dopamine hydrochloride (DH) and acetylcholine chloride (AC), have been studied, and the results are further compared with that of the structurally similar conventional cationic surfactant tetradecyltrimethylammonium bromide (TTAB). The micellization and interfacial behavior of C(14)mimBr and TTAB, in the presence of DH and AC, has been investigated from conductivity and surface tension measurements. Various micellar and adsorption characteristics for these drug-surfactant systems (DH/AC + C(14)mimBr/TTAB) have been investigated, indicating favorable interactions between them. The more detailed information regarding the nature of interactions between C(14)mimBr/TTAB and DH/AC is obtained from cyclic voltammetry (CV) and (1)H NMR measurements. CV measurements have been employed to evaluate the binding constant (K) and the Gibbs free energy change (ΔG) for these drug-surfactant complexes. These measurements indicate the existence of cation-π as well as π-π interactions between drugs and surfactants. A detailed analysis of chemical shifts of protons of drug molecules (DH and AC) in the presence of C(14)mimBr and TTAB has been done by (1)H NMR. The results obtained from (1)H NMR are in agreement with those of CV measurements. (1)H NMR studies along with the conductivity and surface tension measurements help in predicting the possible location of adsorption of these drug molecules in C(14)mimBr and TTAB micelles.

Defective secretion of mucilage is the cellular basis for agravitropism in primary roots of Zea mays cv. Ageotropic

Science.gov (United States)

Miller, I.; Moore, R.

1990-01-01

Root caps of primary, secondary, and seminal roots of Z. mays cv. Kys secrete large amounts of mucilage and are in close contact with the root all along the root apex. These roots are strongly graviresponsive. Secondary and seminal roots of Z. mays cv. Ageotropic are also strongly graviresponsive. Similarly, their caps secrete mucilage and closely appress the root all along the root apex. However, primary roots of Z. mays cv. Ageotropic are non-responsive to gravity. Their caps secrete negligible amounts of mucilage and contact the root only at the extreme apex of the root along the calyptrogen. These roots become graviresponsive when their tips are coated with mucilage or mucilage-like materials. Peripheral cells of root caps of roots of Z. mays cv. Kys contain many dictyosomes associated with vesicles that migrate to and fuse with the plasmalemma. Root-cap cells of secondary and seminal (i.e. graviresponsive) roots of Z. mays cv. Ageotropic are similar to those of primary roots of Z. mays cv. Kys. However, root-cap cells of primary (i.e. non-graviresponsive) roots of Z. mays cv. Ageotropic have distended dictyosomal cisternae filled with an electron-dense, granular material. Large vesicles full of this material populate the cells and apparently do not fuse with the plasmalemma. Taken together, these results suggest that non-graviresponsiveness of primary roots of Z. mays cv. Ageotropic results from the lack of apoplastic continuity between the root and the periphery of the root cap. This is a result of negligible secretion of mucilage by cells along the edge of the root cap which, in turn, appears to be due to the malfunctioning of dictyosomes in these cells.

Light equation in eclipsing binary CV Boo: third body candidate in elliptical orbit

Science.gov (United States)

Bogomazov, A. I.; Kozyreva, V. S.; Satovskii, B. L.; Krushevska, V. N.; Kuznyetsova, Y. G.; Ehgamberdiev, S. A.; Karimov, R. G.; Khalikova, A. V.; Ibrahimov, M. A.; Irsmambetova, T. R.; Tutukov, A. V.

2016-12-01

A short period eclipsing binary star CV Boo is tested for the possible existence of additional bodies in the system with a help of the light equation method. We use data on the moments of minima from the literature as well as from our observations during 2014 May-July. A variation of the CV Boo's orbital period is found with a period of {≈}75 d. This variation can be explained by the influence of a third star with a mass of {≈}0.4 M_{⊙} in an eccentric orbit with e≈0.9. A possibility that the orbital period changes on long time scales is discussed. The suggested tertiary companion is near the chaotic zone around the central binary, so CV Boo represents an interesting example to test its dynamical evolution. A list of 14 minima moments of the binary obtained from our observations is presented.

Experimentation and numerical modeling of cyclic voltammetry for electrochemical micro-sized sensors under the influence of electrolyte flow

DEFF Research Database (Denmark)

Adesokan, Bolaji James; Quan, Xueling; Evgrafov, A.

2016-01-01

of the recorded CV. However, at high scan rates (250 mV/s) and slow flow rates (50 - 200 μ/L), peak currents are recorded which means that mass transport is dominated by the diffusion mechanism and a quasi-steady state of CV is recorded. In the case of insufficient supporting electrolyte, the excess charges....... The numerical results and the experimental data show both qualitative good agreement and quantitative good agreement....

Plant regeneration of Brassica oleracea subsp. italica (Broccoli) CV ...

African Journals Online (AJOL)

STORAGESEVER

2009-06-03

Jun 3, 2009 ... Department of Agriculture Technology, Faculty of Agriculture, Universiti Putra Malaysia, 43400 Serdang, Selangor Darul. Ehsan, Malaysia. Accepted 20 March, 2009. Hypocotyls and shoot tips were used as explants in in vitro plant regeneration of broccoli (Brassica oleracea subsp.italica) cv. Green Marvel.

Conductive polymer/reduced graphene oxide/Au nano particles as efficient composite materials in electrochemical supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Shabani Shayeh, J. [Center of Excellence in Electrochemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Ehsani, A., E-mail: a.ehsani@qom.ac.ir [Department of Chemistry, Faculty of Science, University of Qom, P.O. Box 37185-359, Qom (Iran, Islamic Republic of); Ganjali, M.R.; Norouzi, P. [Center of Excellence in Electrochemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Endocrinology & Metabolism Research Center, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Jaleh, B. [Physics Department, Bu-Ali Sina University, Hamedan 65174 (Iran, Islamic Republic of)

2015-10-30

Graphical abstract: - Highlights: • PANI/rGO/AuNPs as a ternary composite synthesized by electrodeposition. • Presence of rGO/AuNPs caused increasing the stability of electrodes. • Composite represented high specific capacitance, specific power and specific energy values than PANI. - Abstract: Polyaniline/reduced graphene oxide/Au nano particles (PANI/rGO/AuNPs) as a hybrid supercapacitor were deposited on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) method as ternary composites and their electrochemical performance was evaluated in acidic medium. Scanning electron micrographs clearly revealed the formation of nanocomposites on the surface of the working electrode. Scanning electron micrographs (SEM) clearly revealed the formation of nanocomposites on the surface of working electrode. Different electrochemical methods including galvanostatic charge–discharge (CD) experiments, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were carried out in order to investigate the applicability of the system as a supercapacitor. Based on the cyclic voltammogram results obtained, PANI/rGO/AuNPs gave higher specific capacitance, power and energy values than PANI at a current density of 1 mA cm{sup −2}. Specific capacitance (SC) of PANI and PANI/rGO/AuNPs electrodes calculated using CV method are 190 and 303 F g{sup −1}, respectively. The present study introduces new nanocomposite materials for electrochemical redox capacitors with advantages including long life cycle and stability due to synergistic effects of each component.

Conductive polymer/reduced graphene oxide/Au nano particles as efficient composite materials in electrochemical supercapacitors

International Nuclear Information System (INIS)

Shabani Shayeh, J.; Ehsani, A.; Ganjali, M.R.; Norouzi, P.; Jaleh, B.

2015-01-01

Graphical abstract: - Highlights: • PANI/rGO/AuNPs as a ternary composite synthesized by electrodeposition. • Presence of rGO/AuNPs caused increasing the stability of electrodes. • Composite represented high specific capacitance, specific power and specific energy values than PANI. - Abstract: Polyaniline/reduced graphene oxide/Au nano particles (PANI/rGO/AuNPs) as a hybrid supercapacitor were deposited on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) method as ternary composites and their electrochemical performance was evaluated in acidic medium. Scanning electron micrographs clearly revealed the formation of nanocomposites on the surface of the working electrode. Scanning electron micrographs (SEM) clearly revealed the formation of nanocomposites on the surface of working electrode. Different electrochemical methods including galvanostatic charge–discharge (CD) experiments, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were carried out in order to investigate the applicability of the system as a supercapacitor. Based on the cyclic voltammogram results obtained, PANI/rGO/AuNPs gave higher specific capacitance, power and energy values than PANI at a current density of 1 mA cm"−"2. Specific capacitance (SC) of PANI and PANI/rGO/AuNPs electrodes calculated using CV method are 190 and 303 F g"−"1, respectively. The present study introduces new nanocomposite materials for electrochemical redox capacitors with advantages including long life cycle and stability due to synergistic effects of each component.

ANALISIS KUALITAS KEHIDUPAN KERJA, KINERJA, DAN KEPUASAN KERJA PADA CV DUTA SENENAN JEPARA

Directory of Open Access Journals (Sweden)

Noor Arifin

2012-04-01

Full Text Available Abstract: Analysis of Work Quality, Performance, and Job Satisfaction in CV. Duta Senenan Jepara. This study aims to analyze the effect of the quality work life of employees to their performance, analyze the effect of the quality of work life to the job satisfaction, and analyze the effect of the job satisfaction to employee performance. Variables used in this study are: quality of work Life developed by Wayne Cascio 1992; the performance of employees, developed by Elmuti and Kathawala, 1997; and variables Job Satisfaction, provided by Robbin, 1996 and Wexley et al, 1992. The sample of this study consists of 65 employees. The data Analysis were performed using structural equation modeling with partial least square approach. The result suggests that the quality of work life affects the performance; the satisfaction affects the employee performance; and the quality of working life has no effect on employee satisfaction.   Keywords :  quality of work life, on job satisfaction, employee performance   Abstrak: Analisis Kualitas Kehidupan, Kinerja, dan Kepuasan Kerja pada CV. Duta Senenan Jepara. Penelitian ini bertujuan untuk menganalisis pengaruh kualitas kehidupan kerja terhadap kinerja karyawan, menganalisis pengaruh kualitas kehidupan kerja terhadap kepuasan kerja, dan menganalisis pengaruh kepuasan kerja terhadap kinerja karyawan. Variabel yang digunakan dalam penelitian ini adalah: Kualitas Kehidupan Kerja, dari Cascio Wayne 1992. kemudian kinerja karyawan, dari Elmuti dan Kathawala, 1997, dan Kepuasan Kerja, yang dikembangkan oleh Robbin, 1996 serta Wexley et.al., 1992. Penelitian ini mengambil sampel 65 karyawan dari CV DUTA Senenan Jepara. Teknik analisis yang digunakan adalah Structural Equation Modeling (SEM dengan pendekatan Partial Least Square (PLS. Penelitian ini menyimpulkan bahwa kualitas kehidupan kerja sangat berpengaruh terhadap kinerjanya; kepuasan berpengaruh terhadap kinerja karyawan dan kualitas kehidupan kerja tidak

Investigation of antioxidant capacity of the extracts of bilberry (VACCINUM MYRTILLIS L.) by voltammetry

Science.gov (United States)

Vtorushina, A. N.; Nikonova, E. D.

2016-02-01

This paper deals with the urgent issue of the search of new drugs based on plant raw materials that have an influence on various stages of oxidation processes occurring in the human body. The aim of this paper is to determine the antioxidant activity of the bilberry extracts that are used in the medicine practice by a cathodic voltammetry method. We consider the influence of water and alcohol bilberry extracts on the process of oxygen electroreduction. From these extracts the most activity relation to the process of cathodic oxygen reduction showed alcohol (40%) bilberry extract. It was also stated that the alcohol extract of bilberry has a greater antioxidant activity than other known antioxidants such as ascorbic acid, glucose, dihydroquercetin. Thus, after consideration of a number of plant objects, we showed the possibility of applying the method of cathodic voltammetry for the determination of total antioxidant activity of plant material and identifying and highlighting the most perspective sources of biologically active substances (BAS), as well as the ability of identifying extractants that fully extract BAS from plant raw materials. The activity data of extracts of plant raw materials gives an opportunity of establishing an effective yield phytopreparation based on bilberry that has an antioxidant effect.

Investigation of antioxidant capacity of the extracts of bilberry (VACCINUM MYRTILLIS L.) by voltammetry

International Nuclear Information System (INIS)

Vtorushina, A N; Nikonova, E D

2016-01-01

This paper deals with the urgent issue of the search of new drugs based on plant raw materials that have an influence on various stages of oxidation processes occurring in the human body. The aim of this paper is to determine the antioxidant activity of the bilberry extracts that are used in the medicine practice by a cathodic voltammetry method.We consider the influence of water and alcohol bilberry extracts on the process of oxygen electroreduction. From these extracts the most activity relation to the process of cathodic oxygen reduction showed alcohol (40%) bilberry extract. It was also stated that the alcohol extract of bilberry has a greater antioxidant activity than other known antioxidants such as ascorbic acid, glucose, dihydroquercetin.Thus, after consideration of a number of plant objects, we showed the possibility of applying the method of cathodic voltammetry for the determination of total antioxidant activity of plant material and identifying and highlighting the most perspective sources of biologically active substances (BAS), as well as the ability of identifying extractants that fully extract BAS from plant raw materials. The activity data of extracts of plant raw materials gives an opportunity of establishing an effective yield phytopreparation based on bilberry that has an antioxidant effect. (paper)

Single-wall carbon nanotube chemical attachment at platinum electrodes

International Nuclear Information System (INIS)

Rosario-Castro, Belinda I.; Contes-de-Jesus, Enid J.; Lebron-Colon, Marisabel; Meador, Michael A.; Scibioh, M. Aulice; Cabrera, Carlos R.

2010-01-01

Self-assembled monolayer (SAM) techniques were used to adsorb 4-aminothiophenol (4-ATP) on platinum electrodes in order to obtain an amino-terminated SAM as the base for the chemical attachment of single-wall carbon nanotubes (SWCNTs). A physico-chemical, morphological and electrochemical characterizations of SWCNTs attached onto the modified Pt electrodes was done by using reflection-absorption infrared spectroscopy (RAIR), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and cyclic voltammetry (CV) techniques. The SWNTs/4-ATP/Pt surface had regions of small, medium, and large thickness of carbon nanotubes with heights of 100-200 nm, 700 nm to 1.5 μm, and 1.0-3.0 μm, respectively. Cyclic voltammetries (CVs) in sulfuric acid demonstrated that attachment of SWNTs on 4-ATP/Pt is markedly stable, even after 30 potential cycles. CV in ruthenium hexamine was similar to bare Pt electrodes, suggesting that SWNTs assembly is similar to a closely packed microelectrode array.

The Polypyrrole/Multiwalled Carbon Nanotube Modified Au Microelectrode for Sensitive Electrochemical Detection of Trace Levels of Pb2+

Directory of Open Access Journals (Sweden)

Xuxing Zhu

2017-03-01

Full Text Available The sensitive detection of trace levels of heavy metal ions such as Pb2+ is of significant importance due to the health hazard they pose. In this paper, we present a polypyrrole (PPy/multiwalled carbon nanotube (MWCNT-modified Au microelectrode. The PPy/MWCNT composite film was electrochemically deposited on the microelectrode by cyclic voltammetry (CV. The composite film was investigated by scanning electron microscope (SEM, CV, and electrochemical impedance spectroscopy (EIS, and the results show that this film presents a uniformly distributed and web-like entangled structure and good conductivity. Differential pulse stripping voltammetry (DPSV was applied to determine trace levels of Pb2+. Experimental conditions including accumulation time and deposition potential were optimized. In optimal conditions, the PPy/MWCNT-modified microelectrode performed sensitive detection of Pb2+ within a concentration range from 1 to 100 μg·L−1, and the limit of detection was 0.65 μg·L−1 at the signal-to-noise ratio of three.

TENCompetence Learning Design Toolkit, Runtime component, ccsi_v3_2_10c_v1_4

NARCIS (Netherlands)

Sharples, Paul; Popat, Kris; Llobet, Lau; Santos, Patricia; Hernández-Leo, Davinia; Miao, Yongwu; Griffiths, David; Beauvoir, Phillip

2010-01-01

Sharples, P., Popat, K., Llobet, L., Santos, P., Hernandez-Leo, D., Miao, Y., Griffiths, D. & Beauvoir, P. (2009) TENCompetence Learning Design Toolkit, Runtime component, ccsi_v3_2_10c_v1_4 This release is composed of three files corresponding to CopperCore Service Integration (CCSI) v3.2-10cv1.4,

Investigation of using wavelet analysis for classifying pattern of cyclic voltammetry signals

Science.gov (United States)

Jityen, Arthit; Juagwon, Teerasak; Jaisuthi, Rawat; Osotchan, Tanakorn

2017-09-01

Wavelet analysis is an excellent technique for data processing analysis based on linear vector algebra since it has an ability to perform local analysis and is able to analyze an unspecific localized area of a large signal. In this work, the wavelet analysis of cyclic waveform was investigated in order to find the distinguishable feature from the cyclic data. The analyzed wavelet coefficients were proposed to be used as selected cyclic feature parameters. The cyclic voltammogram (CV) of different electrodes consisting of carbon nanotube (CNT) and several types of metal phthalocyanine (MPc) including CoPc, FePc, ZnPc and MnPc powders was used as several sets of cyclic data for various types of coffee. The mixture powder was embedded in a hollow Teflon rod and used as working electrodes. Electrochemical response of the fabricated electrodes in Robusta, blend coffee I, blend coffee II, chocolate malt and cocoa at the same concentrations was measured with scanning rate of 0.05V/s from -1.5 to 1.5V respectively to Ag/AgCl electrode for five scanning loops. The CV of blended CNT electrode with some MPc electrodes indicated the ionic interaction which can be the effect of catalytic oxidation of saccharides and/or polyphenol on the sensor surface. The major information of CV response can be extracted by using several mother wavelet families viz. daubechies (dB1 to dB3), coiflets (coiflet1), biorthogonal (Bior1.1) and symlets (sym2) and then the discrimination of these wavelet coefficients of each data group can be separated by principal component analysis (PCA). The PCA results indicated the clearly separate groups with total contribution more than 62.37% representing from PC1 and PC2.

An extensive study of electrochemical behavior of brimonidine and its determination at glassy carbon electrode

International Nuclear Information System (INIS)

Aleksić, Mara M.; Radulović, Valentina; Agbaba, Danica; Kapetanović, Vera

2013-01-01

Highlights: • The electrochemical behavior of BRIM was investigated by CV, DPV and SWV at GCE. • The effects of pH, scan rate and BRIM concentriation was studied. • The nature of the electrode process, and the mechanism scheme was proposed. • DPV method was developed for the estimation of BRIM in the Alphagan eye drops. -- Abstract: The electrochemical behavior of brimonidine (BRIM), an antiglaucoma agent applied in therapy for lowering high intraocular pressure, was investigated by cyclic voltammetry, differential pulse voltammetry and square wave voltammetry using a glassy carbon electrode (GCE). The reduction of BRIM occurs as one-step quasi-reversible reaction in acid and neutral medium, reaching the full reversibility in alkaline solutions. Reduction process involves the transfer of two electrons and two protons at the pyrazine ring of quinoxaline moiety, forming a dihydro-derivative. In acid and neutral solutions, brimonidine reduction product is partly oxidized to its hydroxy-derivative. BRIM is also oxidized irreversibly with the transfer of one electron and one proton at secondary amine moiety. The effects of pH of the electrolyte solution, scan rate and BRIM concentration were monitored. The nature of the electrode process was found to be controlled by the adsorption at pH > 6 and the total surface concentration of brimonidine adsorbed onto the GCE surface at pH 7, Γ BRIM = 1.35 × 10 −10 mol cm −2 was obtained. Based on this study, differential pulse voltammetric method was developed, validated and suggested for rapid electroanalytical determination of the low concentration of brimonidine. The linearity was achieved within the concentration range from 5 × 10 −7 to 5 × 10 −6 M with LOD = 1.6 × 10 −7 M and LOQ = 5.3 × 10 −7 M. The method was applied for brimonidine determination in pharmaceutical dosage form, eye drops

Death of pastures syndrome: tissue changes in Urochloa hybrida cv. Mulato II and Urochloa brizantha cv. Marandu

Directory of Open Access Journals (Sweden)

N. G. Ribeiro-Júnior

Full Text Available Abstract The quality of forage production is a prerequisite to raising livestock. Therefore, income losses in this activity, primarily cattle raising, can result in the impossibility of economic activity. Through the qualitative and quantitative anatomical study of Urochloa hybrida cv. Mulato II and U. brizantha cv. Marandu, we searched for descriptions and compared changes in the individual vegetative body from populations with death syndrome pastures (DPS. Specimens were collected at different physiological stages from farms in northern Mato Grosso. After collection, the individuals were fixed in FAA50 and stored in 70% alcohol. Histological slides were prepared from the middle third of the sections of roots, rhizomes, and leaves, and the proportions and characteristics of tissues were evaluated in healthy, intermediate, and advanced stages of DPS. Changes were compared between cultivars. With the advancement of the syndrome, the following changes were observed: a more marked decrease in the length of roots in U. hybrida; disorganization of the cortical region of the roots and rhizome cultivars; fungal hyphae in roots and aerenchyma formation in U. hybrida; a decrease in sclerenchyma fiber proportions in roots and leaves; sclerification of the epidermis of U. brizantha rhizomes; and an increase in pericyclic fibers in U. hybrida. Furthermore, there was a decrease in the volume of epidermal cells of the abaxial face of the leaves of both cultivars, with a greater reduction in U. hybrida; a gradual decrease in thickness in the midrib of leaves similar to leaf mesophyll; conduction system obstructions; partial or total cell lysis in roots and rhizomes affected by the syndrome. Obstructions in sieve tube element and companion cells, and sometimes obstruction in xylem vessel elements. The evolution of DPS in cultivars was similar, but there were variations, arising probably from the physiological response to stress, such as aerenchyma formation in

Variation sweep rate cyclic voltammetry on the capacitance electrode activated carbon/PVDF with polymer electrolyte

Science.gov (United States)

Rohmawati, L.; Setyarsih, W.; Nurjannah, T.

2018-03-01

Sweep rate of the process voltammetry cyclic characterization is very influential towards the electrode capacitance value, especially on activated carbon electrodes/PVDF. A simple method of this research by use a mixing for electrode activated carbon/10 wt. % PVDF and the separator is made of a polymer electrolyte (PVA/H3PO4) by a sol gel method. The prototype supercapacitor is made in the form of a sandwich with a separator placed between two electrodes. Electrodes and separators are arranged in layers at a pressure of 1500 psi, then heated at 50°C for 10 minutes. Next done cyclic voltammetry in a potential range of -1 V to 1 V with a sweep rate of 5 mV/s, 10 mV/s, 20 mV/s, 25 mV/s and 50 mV/s. This results of curves voltammogram is reversible, the most wide curve on the sweep rate of 5 mV/s and most narrow curve on a sweep rate of 50 mV/s. Supercapacitor capacitance values obtained by 86 F/g, 43 F/g, 21 F/g, 16 F/g, and 8 F/g.

Auditory extinction and dichotic listening cv task in cerebral infarction preliminary report

Directory of Open Access Journals (Sweden)

Mauro Muszkat

1990-06-01

Full Text Available Six stroke patients were studied using a dichotic listening¹ CV task, 4 with left hemisphere infarction, 2 with right hemisphere infarction. It was observed a «lesion--effect», a shift of hemisphere prevalence to the side opposite a brain lesion. The authors suggest that the lesion-effect can be explained by the auditory extinction phenomenon at the linguistic level.

Modificação da atmosfera na qualidade pós-colheita de ameixas cv. Reubennel Modified atmosphere on postharvest quality of plums cv. Reubennel

Directory of Open Access Journals (Sweden)

Marcelo Barbosa Malgarim

2005-12-01

Full Text Available Ameixas, de modo geral, têm curto período de conservação pós-colheita, havendo necessidade de otimizar as condições de colheita e de armazenamento. Este trabalho objetivou avaliar o efeito de diferentes modificadores de atmosfera, durante o armazenamento refrigerado, na qualidade pós-colheita de ameixas cv. Reubennel. Frutas no estádio de maturação meio-maduro foram submetidas aos seguintes modificadores de atmosfera: filmes de polietileno de 12,5 e 15µm de espessura e cera à base de carnaúba e avaliadas após 10; 20; 30 e 40 dias de armazenamento a 0ºC e UR de 90-95%. Avaliaram-se a perda de massa, cor, firmeza da polpa, pH, sólidos solúveis (SS, acidez titulável (AT, relação SS/AT, incidência de podridões, escurecimento interno e características sensoriais. Essas avaliações foram realizadas 3 dias após a retirada das frutas da câmara fria. Verificou-se que a cera à base de carnaúba GARFRESH N (BL9,5, sem diluição, e filmes de polietileno de 12,5 e 15µm reduziram a perda de massa, porém são impróprios para a modificação da atmosfera, em ameixas cv. Reubennel durante o armazenamento refrigerado. Ameixas cv. Reubennel mantêm a qualidade quando armazenadas durante 30 dias a 0ºC sem atmosfera modificada.Plums quickly loose postharvest quality, which makes imperative to optimize harvest and storage conditions. The objective of this work was to determine the effects of various atmosphere modifiers on the postharvest quality of cold storage plums, cv. Reubennel. Semi-mature fruits were stored under the following atmosphere modifiers conditions: polyethylene films 12,5 or 15µm of thickness; or carnauba wax. After submitted to these conditions the fruits were stored for 10, 20, 30 and 40 days in a cold room at 0ºC and 90-95% RH. Three days after taken out from the cold storage, the fruits were evaluated about: weight loss; color; firmness; pH; soluble solids (SS; titratable acidity (TA; SS/TA ratio; incidence of

Optical and electrochemical studies of polyaniline/SnO{sub 2} fibrous nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Manivel, P. [Department of Nanoscience and Technology, Bharathiar University, Coimbatore 641 046, Tamil Nadu (India); Ramakrishnan, S.; Kothurkar, Nikhil K. [Department of Chemical Engineering and Material Science, Amrita Vishwa Vidyapeetham, Coimbatore 641 112, Tamil Nadu (India); Balamurugan, A.; Ponpandian, N.; Mangalaraj, D. [Department of Nanoscience and Technology, Bharathiar University, Coimbatore 641 046, Tamil Nadu (India); Viswanathan, C., E-mail: viswanathan@buc.edu.in [Department of Nanoscience and Technology, Bharathiar University, Coimbatore 641 046, Tamil Nadu (India)

2013-02-15

Graphical abstract: Fiber with porous like structure of PANI/SnO{sub 2} nanocomposites were prepared by simplest in situ chemical polymerization method. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The excellent electrochemical properties of composite electrode show the specific capacitance of 173 F/g at a scan rate of 25 m V/s. Display Omitted Highlights: ► Self assembled PANI/SnO{sub 2} nanocomposites were synthesized by simple polymerization method. ► Electrochemical behavior of PANI/SnO{sub 2} nanocomposites electrode was analyzed by CV. ► Nanocomposites exhibit a higher specific capacitance of 173 F/g, compared with pure SnO{sub 2}. -- Abstract: Polyaniline (PANI)/tin oxide (SnO{sub 2}) fibrous nanocomposites were successfully prepared by an in situ chemical polymerization method with suitable conditions. The obtained composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, photoluminescence (PL), electrical conductivity and cyclic voltammetry studies (CV). The XRD pattern of the as-prepared sample shows the presence of tetragonal SnO{sub 2} and the crystalline structure of SnO{sub 2} was not affected with the incorporation of PANI. The FTIR analysis confirms the uniform attachment of PANI on the surface of SnO{sub 2} nanostructures. SEM images show a fibrous agglomerated structure of PANI/SnO{sub 2}. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The electrochemical behavior of the PANI/SnO{sub 2} composite electrode was evaluated in a H{sub 2}SO{sub 4} solution using cyclic voltammetry. The composite electrode exhibited a specific capacitance of 173 F/g at a scan rate 25 mV/s. Thus the as-prepared PANI/SnO{sub 2} composite shows excellent electrochemical properties, suggesting that this composite is a promising material for supercapacitors.

Aminoethoxivinilglicina no controle do amadurecimento de frutos de caqui cv. Fuyu Aminoethoxyvinylglycine in the ripening control of persimmon fruits cv. Fuyu

Directory of Open Access Journals (Sweden)

Angela Fuentes Fagundes

2006-04-01

Full Text Available Objetivou-se avaliar o efeito de aminoethoxivinilglicina (AVG, aplicado na pós-colheita, no amadurecimento de frutos de caqui (Diospyros kaki L. cv. Fuyu, armazenados à temperatura de 0 ± 2 ºC. Os frutos foram imersos durante dois minutos em solução de AVG, na concentração de 0; 415; 830 e 1.200 g ha-1 e dissolvidos em água destilada e adição de espalhante adesivo (óleo vegetal a 0,02% (v/v, secos à temperatura ambiente no barracão e armazenados em câmara fria a 0 ± 2 ºC e 95±2 % UR, e avaliados aos 32 e 52 dias com relação à firmeza, sólidos solúveis, pH da polpa, acidez titulável e injúria por frio. O AVG mostrou-se promissor no uso pós-colheita em caqui, onde os frutos tratados conservaram índices de firmeza linear em função da dose e teores de AT, SS e pH aceitáveis para o 'Fuyu'. Porém os frutos apresentaram translucidez, característica de injúria por frio, indicando a necessidade de novos estudos para se compreender a fisiologia pós-colheita deste fruto.An experiment was carried out to analyze the effect of the application of Aminoethoxyvinylglycine (AVG in post harvest application in persimmon fruits (Diospyros kaki L. cv. Fuyu stored at a temperature of 0 ± 2ºC. The fruits were immersed for two minutes into an AVG solution at a concentration of 0; 415; 830; 1200 g ha-1 and dissolved in distillated water. Then it was added adhesive spreader (vegetable oil 0.02% (v/v, dried at room temperature and stored at 0 ± 2 ºC and 95±2 % humidity. The treatments were evaluated on the 32nd and 52nd days to check the firmness, soluble solids, pH of the pulp, tritable acidity and chilling injury. The AVG may be promising in post harvest use with persimmon fruits, where treated fruits preserved linear levels of firmness in function of the doses and TA, SS and pH levels are acceptable for cv. Fuyu. However, fruits showed translucency, which are characteristics of chilling injury, indicating that new studies are

SQUARE WAVE CATHODIC STRIPPING VOLTAMMETRY ADSORPTIVE FOR NICKEL AND COBALT ANALYSIS

Directory of Open Access Journals (Sweden)

Saryati Saryati

2010-06-01

Full Text Available The adsorptive stripping voltammetric determination of Ni and Co based on adsorption of the Ni/Co and dimethylglioxime (DMG complex on a hanging mercury drop electrode is studied. The reduction current of the adsorbed DMG complex is measured by square wave cathodic stripping voltammetry method. The effect of various parameters such as ligand concentration, pH of supporting electrolytic, adsorption potential and adsorption time on the current peak of Ni and Co voltammogram were studied. Optimum condition of this method are supporting electrolyte pH 9, DMG concentration 5×10 -4 M, adsorption potential -0.7 V vs Ag/AgCl and adsorption time 180 second. A linier relationship between the current peak and Ni or Co concentration was obtained in the range 5 - 30 ng/mL and the detection limit 0.6 ng/ml for both Ni and Co. The recovery of Ni and Co were 98.11-104.17% using standard biological materials with RSD 2.59 - 10.37%. Based on ";t"; test can be conclude that the result are nearly equal to the standard reference material.   Keywords: adsorptive stripping voltammetric, dimethylglioxime complex, nickel, cobalt

Detection of trace levels of Pb2+ in tap water at boron-doped diamond electrodes with anodic stripping voltammetry

International Nuclear Information System (INIS)

Dragoe, Diana; Spataru, Nicolae; Kawasaki, Ryuji; Manivannan, Ayyakkannu; Spataru, Tanta; Tryk, Donald A.; Fujishima, Akira

2006-01-01

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting trace levels of lead by linear-sweep anodic stripping voltammetry. The low limit of detection (2 nM) is an advantage compared to other electrode materials, and it was found that at low pH values, copper concentrations that are usually present in drinking water do not affect to a large extent the detection of lead. These findings recommend anodic stripping voltammetry at the BDD electrodes as a suitable mercury-free method for the determination of trace levels of lead in drinking water. The results obtained for the lead detection in tap water real samples are in excellent agreement with those found by inductively coupled plasma-mass spectrometry (ICP-MS), demonstrating the practical analytical utility of the method

Core Problem: Does the CV Parent Body Magnetization require differentiation?

Science.gov (United States)

O'Brien, T.; Tarduno, J. A.; Smirnov, A. V.

2016-12-01

Evidence for the presence of past dynamos from magnetic studies of meteorites can provide key information on the nature and evolution of parent bodies. However, the suggestion of a past core dynamo for the CV parent body based on the study of the Allende meteorite has led to a paradox: a core dynamo requires differentiation, evidence for which is missing in the meteorite record. The key parameter used to distinguish core dynamo versus external field mechanisms is absolute field paleointensity, with high values (>>1 μT) favoring the former. Here we explore the fundamental requirements for absolute field intensity measurement in the Allende meteorite: single domain grains that are non-interacting. Magnetic hysteresis and directional data define strong magnetic interactions, negating a standard interpretation of paleointensity measurements in terms of absolute paleofield values. The Allende low field magnetic susceptibility is dominated by magnetite and FeNi grains, whereas the magnetic remanence is carried by an iron sulfide whose remanence-carrying capacity increases with laboratory cycling at constant field values, indicating reordering. The iron sulfide and FeNi grains are in close proximity, providing mineralogical context for interactions. We interpret the magnetization of Allende to record the intense early solar wind with metal-sulfide interactions amplifying the field, giving the false impression of a higher field value in some prior studies. An undifferentiated CV parent body is thus compatible with Allende's magnetization. Early solar wind magnetization should be the null hypothesis for evaluating the source of magnetization for chondrites and other meteorites.

Screening of pharmacologic adulterant classes in herbal formulations using voltammetry of microparticles.

Science.gov (United States)

Doménech-Carbó, Antonio; Martini, Mariele; de Carvalho, Leandro Machado; Viana, Carine; Doménech-Carbó, María Teresa; Silva, Miguel

2013-02-23

A solid state electrochemical method for screening different families of adulterant chemicals illegally added to commercial phytotherapuetic formulations is described. The proposed method, based on the voltammetry of microparticles approach, permits a fast and sensitive way to distinguish between anorexics (amfepramone, fenproporex, sibutramine), benzozodiazepinic anxiolytics (clonazepam, flurazepam, alprazolam, midazolam, medazepam, chlordiazepoxide, diazepam), antidepressants (bupropione, fluoxetine, sertraline, paroxetine), diuretics (hydrochlorothiazide, furosemide, chlortalidone, amiloride, spironolactone), and hypoglycemics (glimepiride, chlorpropamide, glibenclamide) based on characteristic voltammetric signals recorded on solid micro- or nanosamples attached to graphite electrodes immersed into aqueous electrolytes. Copyright © 2012 Elsevier B.V. All rights reserved.

The learning machine in quantitative chemical analysis : Part I. Anodic Stripping Voltammetry of Cadmium, Lead and Thallium

NARCIS (Netherlands)

Bos, M.; Jasink, G.

1978-01-01

The linear learning machine method was applied to the determination of cadmium, lead and thallium down to 10-8 M by anodic stripping voltammetry at a hanging mercury drop electrode. With a total of three trained multicategory classifiers, concentrations of Cd, Pb and Tl could be predicted with an

Voltammetry of ion transfer across a polarized room-temperature ionic liquid membrane facilitated by valinomycin: theoretical aspects and application.

Science.gov (United States)

Langmaier, Jan; Samec, Zdenek

2009-08-01

Cyclic voltammetry is used to investigate the transfer of alkali-metal cations, protons, and ammonium ions facilitated by the complex formation with valinomycin at the interface between an aqueous electrolyte solution and a room-temperature ionic liquid (RTIL) membrane. The membrane is made of a thin (approximately 112 microm) microporous filter impregnated with an RTIL that is composed of tridodecylmethylammonium cations and tetrakis[3,5-bis(trifluoromethyl)phenyl]borate anions. An extension of the existing theory of voltammetry of ion transfer across polarized liquid membranes makes it possible to evaluate the standard ion-transfer potentials for the hydrophilic cations studied, as well as the stability constants (K(i)) of their 1:1 complexes with valinomycin, as log K(i) = 9.0 (H(+)), 11.1 (Li(+)), 12.8 (Na(+)), 17.2 (K(+)), 15.7 (Rb(+)), 15.1 (Cs(+)), and 14.7 (NH(4)(+)). These data point to the remarkably enhanced stability of the valinomycin complexes within RTIL, and to the enhanced selectivity of valinomycin for K(+) over all other univalent ions studied, compared to the conventional K(+) ion-selective liquid-membrane electrodes. Selective complex formation allows one to resolve voltammetric responses of K(+) and Na(+) in the presence of an excess of Mg(2+) or Ca(2+), which is demonstrated by determination of K(+) and Na(+) in the table and tap water samples.

Developing electrodes chemically modified with cucurbit[6]uril to detect 3,4-methylenedioxymethamphetamine (MDMA) by voltammetry

International Nuclear Information System (INIS)

Tadini, Maraine Catarina; Balbino, Marco Antonio; Eleoterio, Izabel Cristina; Siqueirade Oliveira, Laura; Dias, Luis Gustavo; Jean-François Demets, Grégoire; Firmino de Oliveira, Marcelo

2014-01-01

Graphical abstract: - Highlights: • A new stand in forensic chemistry. • Voltammetric method for the determination of MDMA in seized samples. • A new voltammetric sensor for MDMA. - Abstract: This study aimed to develop an electrode chemically modified with cucurbit[6]uril to detect 3,4-methylenedioxymethamphetamine (MDMA), the main active principle of ecstasy samples, by voltammetry. We modified the electrode surface with a film containing cucurbit[6]uril, Nafion, and methanol, using the dip coating or the spin coating technique. During analysis, we employed an electrochemical cell with a conventional three-electrode system and KCl solution (0.1 mol L −1 ) as the supporting electrolyte. We conducted cyclic voltammetry at concentrations ranging from 4.2 × 10 −6 to 4.8 × 10 −5 mol L −1 . We also accomplished scanning electron microscopy, to investigate the structural behavior of the film that originated on the electrode surface. We obtained the following results when we used dip coating to prepare the modified electrode: standard deviation (SD) = 0.024 μA, limit of detection (LOD) = 3.5 μmol L −1 , limit of quantification (LOQ) = 11.7 μmol L −1 , and amperometric sensitivity (m) = 20.9 × 10 3 μA L mol −1 . As for spin coating, we obtained SD = 0.024 μA, LOD = 2.7 μmol L −1 , LOQ = 9.1 μmol L −1 and m = 25.9 × 10 3 μA mol L −1 . These are very promising data: the modified electrode is more sensitive than the conventional glassy carbon electrode under the studied experimental conditions

Resistance selection on banana CV. Ambon Kuning Against Fusarium Wilt

International Nuclear Information System (INIS)

Sutarto, Ismiyarti; Meldia, Yeni; Jumjunidang

1998-01-01

This research was conducted in order to study the occurrence of mutation on irradiated plantlets and their resistance of plants of banana cv. Ambon Kuning against Fusarium wilt. Plantlets of banana cv. Ambon Kuning sized 5 cm were exposed to gamma rays at the doses 5 - 35 Gy intervals, then were subcultured for obtained M 1 V 5 plantlets. More over, the planlets were acclimatized and were planted in the field was already infected by Fasarium (f).culbense (FOC). The result indicated that irradiated plantlets of the doses 20 - 35 Gy were not able to survive up to 6 months after exposing to gamma rays. Abnormalities of M 1 V 5 plantlets originated from irradiated plantlets at the doses 10 and 15 Gy were shown on rossette plantlets with rigid and dark green leaves, and the formation of smooth mass morphologically shaped like calculus. The appearance of plant height and number of suckers of suckers of M 1 V 5 plants in the field was quite various. The number of survival plants after 8 moths planting was 8, 7, 15, and 28, respectively originated from untreated plants and irradiated plantlets at the doses 5, 10, and 15 Gy. After one year planting , only 2 plants were able to survive from irradiated plantlet at the dose 15 Gy. The plants could produce 27 plantlets obtained from culturing their shoot tips. Further study of these plantlets was needed in order create the stability of their resistance to FOC. (author)

Correlation of the first reduction potential of selected radiosensitizers determined by cyclic voltammetry with theoretical calculations

Czech Academy of Sciences Publication Activity Database

Gál, Miroslav; Kolivoška, Viliam; Ambrová, M.; Híveš, J.; Sokolová, Romana

2011-01-01

Roč. 76, č. 8 (2011), s. 937-946 ISSN 0010-0765 R&D Projects: GA ČR GP203/09/P502; GA ČR GA203/09/0705; GA MŠk LC510 Institutional research plan: CEZ:AV0Z40400503 Keywords : cyclic voltammetry * radical ions * radiochemistry Subject RIV: CG - Electrochemistry Impact factor: 1.283, year: 2011

Square Wave Voltammetry: An Alternative Technique to Determinate Piroxicam Release Profiles from Nanostructured Lipid Carriers.

Science.gov (United States)

Otarola, Jessica; Garrido, Mariano; Correa, N Mariano; Molina, Patricia G

2016-08-04

A new, simple, and fast electrochemical (EC) method has been developed to determine the release profile of piroxicam, a nonsteroidal anti-inflammatory drug, loaded in a drug delivery system based on nanostructured lipid carriers (NLCs). For the first time, the samples were analyzed by using square wave voltammetry, a sensitive EC technique. The piroxicam EC responses allow us to propose a model that explains the experimental results and to subsequently determine the amount of drug loaded into the NLCs formulation as a function of time. In vitro drug release studies showed prolonged drug release (up to 5 days), releasing 60 % of the incorporated drug. The proposed method is a promising and stable alternative for the study of different drug delivery systems. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dependence of adenine isolation efficiency on the chain length evidenced using paramagnetic particles and voltammetry measurements

Energy Technology Data Exchange (ETDEWEB)

Huska, Dalibor [Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University of Agriculture and Forestry, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Adam, Vojtech [Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University of Agriculture and Forestry, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Department of Animal Nutrition and Forage Production, Faculty of Agronomy, Mendel University of Agriculture and Forestry, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Trnkova, Libuse [Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, CZ-625 00 Brno (Czech Republic); Kizek, Rene [Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University of Agriculture and Forestry, Zemedelska 1, CZ-613 00 Brno (Czech Republic)], E-mail: kizek@sci.muni.cz

2009-05-15

The main aim of this work was to study the dependence of oligoadenine isolation efficiency on the chain length by using paramagnetic particles covered by homo-deoxythymidines ((dT)25) with subsequent detection by adsorptive transfer technique coupled with square wave voltammetry. For this purpose, the oligonucleotides of the length A5, A10, A15, A20, A25, A30, A35, A40 and poly(A) in various concentrations were chosen. We determined that the isolation efficiency defined as 'isolated oligonucleotide concentration'/'given oligonucleotide concentration' was about 55% on average. Sequence A25 demonstrated the best binding onto microparticles surface.

Alcohol and CV Health: Jekyll and Hyde J-Curves.

Science.gov (United States)

O'Keefe, Evan L; DiNicolantonio, James J; O'Keefe, James H; Lavie, Carl J

2018-02-16

A routine of light or moderate alcohol consumption (≤1 drink/day for women and 1 to 2 drinks/day for men) is associated with a lower risk for all-cause mortality, coronary artery disease (CAD), type 2 diabetes mellitus (T2D), heart failure (HF), and stroke. Conversely, heavy drinking, (>4 drinks/day) is associated with an increased risk for death and cardiovascular (CV) disease (CVD). Excessive alcohol intake trails behind only smoking and obesity among the 3 leading causes of premature deaths in the United States (US). Heavy alcohol use is a common cause of reversible hypertension (HTN), nonischemic dilated cardiomyopathy, atrial fibrillation (AF), and stroke (both ischemic and hemorrhagic). Among males aged 15 to 59 years, alcohol abuse is perhaps the leading cause of premature death. As such, the risk-to-benefit ratio of drinking is less favorable in younger individuals. A daily habit of light to moderate drinking is ideal for those who choose to consume alcohol regularly. Red wine in particular before or during the evening meal is linked with the best long-term CV outcomes. Most of the studies on alcohol and health are observational, and correlation does not prove causation. Health care professionals should not advise nondrinkers to begin drinking because of the paucity of randomized outcome data coupled with the potential for alcohol abuse even among seemingly low risk individuals. Copyright © 2017. Published by Elsevier Inc.

Determinação eletroquímica da capacidade antioxidante para avaliação do exercício físico

Directory of Open Access Journals (Sweden)

Gandra Paulo Guimarães

2004-01-01

Full Text Available Physical training can adapt or cause injury to skeletal muscles implicating metabolic alterations, which can be detected by biochemical analysis. Apparently the increase in the production of reactive oxygen species (ROS is involved in both processes. Enzymatic and low molecular weight antioxidants (LMWA minimize ROS's deleterious action through redox reactions. Cyclic voltammetry (CV has been suggested as a tool to quantify the antioxidant capacity conferred by LMWA. The use of CV to evaluate the modulation of the antioxidant capacity conferred by LMWA in response to physical exercise is discussed here.

Voltammetry of Lead Cations on a New Type of Silver Composite Electrode in the Presence of Other Cations

Czech Academy of Sciences Publication Activity Database

Navrátil, Tomáš; Šebková, Světlana; Kopanica, M.

2004-01-01

Roč. 379, - (2004), s. 294-301 ISSN 1618-2642 Grant - others:GIT(AR) 101/02/U111/CZ Institutional research plan: CEZ:AV0Z4040901 Keywords : voltammetry * silver composite electrode * lead cations Subject RIV: CG - Electrochemistry Impact factor: 2.098, year: 2004

Determination of antioxidant activity of spices and their active principles by differential pulse voltammetry.

Science.gov (United States)

Palma, Alberto; Ruiz Montoya, Mercedes; Arteaga, Jesús F; Rodríguez Mellado, Jose M

2014-01-22

The anodic oxidation of mercury in the presence of hydrogen peroxide in differential pulse voltammetry (DPV) was used to determine the antioxidant (AO) character of radical scavengers. Hydroperoxide radical is formed at the potentials of the oxidation peak on mercury electrodes, such radical reacting with the antioxidants in different extension. The parameter C10 (antioxidant concentration at which the peak area decreases by 10%) is used to measure the scavenging activity of the individual antioxidants. To establish the scavenging activity of antioxidant mixtures as a whole, the parameter, μ10 as the reverse of V10, V10 being the volume necessary to decrease the peak area in DPV by 10%, was selected. Higher μ10 values correspond to higher scavenging activity. The studies have been extended to aqueous extracts of some species. The results may be useful in explaining the effect of spices in vitro and in vivo studies.

Avaliação da Brachiaria brizantha cv. marandu em sistemas silvipastoris Evaluation of Brachiaria brizantha cv. marandu in silvopastoral systems

Directory of Open Access Journals (Sweden)

G.R. Moreira

2009-06-01

Full Text Available Avaliou-se a degradabilidade in situ da matéria seca (MS da Brachiaria brizantha cv. marandu colhida em dois sistemas silvipastoris compostos pelas arbóreas, ipê felpudo (Zeyheria tuberculosa e aroeira (Myracrodruon urundeuva, localizados no bioma Cerrado, município de Lagoa Santa, MG. O período de coleta da forragem foi de dezembro de 2004 a abril de 2005. O delineamento utilizado foi em blocos ao acaso, segundo esquema de parcelas subdivididas, sendo as parcelas os tratamentos e as sub-parcelas os tempos de degradação. O sombreamento com as arbóreas não influenciou a degradabilidade in situ da matéria seca da forrageira.In situ degradability of dry matter of Brachiaria brizantha cv. marandu harvested in two silvopastoral systems was evaluated. One system was composed by Zeyheria tuberculosa tree and the other by Myracrodruon urundeuva, both located at Brazilian Savannah, Lagoa Santa, MG. A completely ramdomized block experimental design in a splitplot arrangement was used. The treatments were allocated in the plots and the times in the splitplot. No effect of shade was observed for in situ dry matter degradability.

Analisis Dan Rekayasa Supplier Relationship Management System Pada CV. Softcom Medan

OpenAIRE

Sukiman

2012-01-01

CV. SOFTCOM is a business entity engages in the computer sales and repair services. At the beginning of its establishment, the company did not see the importance of specialized brand in selling its product. The background of this study was the phenomenon in which many suppliers and different brands of the products found in the market that the company found it difficult to serve its customers claiming the damage of the sold products, the time of product delivered by the suppliers was frequentl...

Cyclovirus CyCV-VN species distribution is not limited to Vietnam and extends to Africa.

Science.gov (United States)

Garigliany, Mutien-Marie; Hagen, Ralf Matthias; Frickmann, Hagen; May, Jürgen; Schwarz, Norbert Georg; Perse, Amanda; Jöst, Hanna; Börstler, Jessica; Shahhosseini, Nariman; Desmecht, Daniel; Mbunkah, Herbert Afegenwi; Daniel, Achukwi Mbunkah; Kingsley, Manchang Tanyi; Campos, Renata de Mendonca; de Paula, Vanessa Salete; Randriamampionona, Njary; Poppert, Sven; Tannich, Egbert; Rakotozandrindrainy, Raphael; Cadar, Daniel; Schmidt-Chanasit, Jonas

2014-12-18

Cycloviruses, small ssDNA viruses of the Circoviridae family, have been identified in the cerebrospinal fluid from symptomatic human patients. One of these species, cyclovirus-Vietnam (CyCV-VN), was shown to be restricted to central and southern Vietnam. Here we report the detection of CyCV-VN species in stool samples from pigs and humans from Africa, far beyond their supposed limited geographic distribution.

Reactivation of UV- and γ-irradiated herpes virus in UV- and X-irradiated CV-1 cells

International Nuclear Information System (INIS)

Takimoto, K.; Niwa, O.; Sugahara, T.

1982-01-01

Enhanced reactivation of UV- and γ-irradiated herpes virus was investigated by the plaque assay on CV-1 monkey kidney monolayer cells irradiated with UV light or X-rays. Both UV- and X-irradiated CV-1 cells showed enhancement of survival of UV-irradiated virus, while little or no enhancement was detected for γ-irradiated virus assayed on UV- or X-irradiated cells. The enhanced reactivation of UV-irradiated virus was greater when virus infection was delayed 24 or 48 h, than for infection immediately following the irradiation of cells. Thus the UV- or X-irradiated CV-1 cells are able to enhance the repair of UV damaged herpes virus DNA, but not of γ-ray damaged ones. (author)

Investigation of hexagonal boron nitride as an atomically thin corrosion passivation coating in aqueous solution.

Science.gov (United States)

Zhang, Jing; Yang, Yingchao; Lou, Jun

2016-09-09

Hexagonal boron nitride (h-BN) atomic layers were utilized as a passivation coating in this study. A large-area continuous h-BN thin film was grown on nickel foil using a chemical vapor deposition method and then transferred onto sputtered copper as a corrosion passivation coating. The corrosion passivation performance in a Na2SO4 solution of bare and coated copper was investigated by electrochemical methods including cyclic voltammetry (CV), Tafel polarization and electrochemical impedance spectroscopy (EIS). CV and Tafel analysis indicate that the h-BN coating could effectively suppress the anodic dissolution of copper. The EIS fitting result suggests that defects are the dominant leakage source on h-BN films, and improved anti-corrosion performances could be achieved by further passivating these defects.

EN-CV during LS1: upgrade, consolidation, maintenance, operation

International Nuclear Information System (INIS)

Nonis, M.

2012-01-01

The Cooling and Ventilation (CV) Group in the Engineering Department (EN) will be heavily involved in several projects and activities during the long shutdown in 2013 and 2014 (LS1) within a time-frame limited to around twelve months. According to the requests received so far, most projects are related to the upgrade of users' equipment, consolidation work, and the construction of new plants. However, through the experience gained from the first years of the LHC run, some projects are also needed to adapt the existing installations to the new operating parameters. Some of these projects are presented hereafter, outlining the impact that they will have on operational working conditions or risks of breakdown. Among these projects we find: the PM32 raising pumps, the cooling of the CERN Control Center, R2E, the backup cooling towers for ATLAS and cryogenics, a thermosyphon for ATLAS, or new pumps in UWs. Finally, EN-CV activities during LS1 for maintenance, operation, and commissioning will be mentioned since they represent a major workload for the Group

Lead migration from toys by anodic stripping voltammetry using a bismuth film electrode.

Science.gov (United States)

Leal, M Fernanda C; Catarino, Rita I L; Pimenta, Adriana M; Souto, M Renata S; Afonso, Christelle S; Fernandes, Ana F Q

2016-09-02

Metals may be released from toys via saliva during mouthing, via sweat during dermal contact, or via gastric and intestinal fluids after partial or whole ingestion. In this study, we determined the lead migration from toys bought on the Portuguese market for children below 3 years of age. The lead migration was performed according to the European Committee for Standardization EN 71-3, which proposes a 2-hour migration test that simulates human gastric conditions. The voltammetric determination of migrated lead was performed by anodic stripping voltammetry (ASV) at a bismuth film electrode (BiFE). For all the analyzed toys, the values of migrated lead did not exceed the limits imposed by the European Committee for Standardization EN 71-3 (90 mg kg -1 ) and by the EU Directive 2009/48/EC (13.5 mg kg -1 ) on the safety of toys.

Theoretical treatment of high-frequency, large-amplitude ac voltammetry applied to ideal surface-confined redox systems

International Nuclear Information System (INIS)

Bell, Christopher G.; Anastassiou, Costas A.; O’Hare, Danny; Parker, Kim H.; Siggers, Jennifer H.

2012-01-01

Highlights: ► Theory of ac voltammetry on ideal surface-confined redox systems. ► Analytical description of the harmonics and transient of the current response. ► Solution valid for high frequency, large-amplitude sinusoidal input voltage. ► Protocol for determining system parameters from experimental current responses. - Abstract: Large-amplitude ac voltammetry, where the applied voltage is a large-amplitude sinusoidal waveform superimposed onto a dc ramp, is a powerful method for investigating the reaction kinetics of surface-confined redox species. Here we consider the large-amplitude ac voltammetric current response of a quasi-reversible, ideal, surface-confined redox system, for which the redox reaction is described by Butler–Volmer theory. We derive an approximate analytical solution, which is valid whenever the angular frequency of the sine-wave is much larger than the rate of the dc ramp and the standard kinetic rate constant of the redox reaction. We demonstrate how the third harmonic and the initial transient of the current response can be used to estimate parameters of the electrochemical system, namely the kinetic rate constant, the electron transfer coefficient, the adsorption formal potential, the initial proportion of oxidised molecules and the linear double-layer capacitance.

Self-assembled bilayers based on organothiol and organotrimethoxysilane on zinc platform

International Nuclear Information System (INIS)

Berger, Francois; Delhalle, Joseph; Mekhalif, Zineb

2010-01-01

This study describes the formation of a bilayer system developed on electrodeposited zinc. In a first step, a monolayer of 11-mercapto-1-undecanol is grafted on zinc, optimization of the conditions of elaboration have been performed. In a second step, organotrimethoxysilane have been grafted on the zinc modified with the hydroxyl terminated self-assembled monolayer (SAM) to finalize the bilayer system. X-ray photoelectron spectroscopy (XPS), polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS) and contact angle measurements are used to characterize each step of modification. An electrochemical evaluation of the different created systems is carried out by linear sweep voltammetry (LSV), cyclic voltammetry (CV) and scanning vibrating electrode technique (SVET). The impact of the modification of zinc using SAM and self-assembled bilayer (SAB) on the electrochemical activity of the surface is highlighted.

Full-length genome sequences of porcine epidemic diarrhoea virus strain CV777; Use of NGS to analyse genomic and sub-genomic RNAs

DEFF Research Database (Denmark)

Rasmussen, Thomas Bruun; Boniotti, Maria Beatrice; Papetti, Alice

2018-01-01

Porcine epidemic diarrhoea virus, strain CV777, was initially characterized in 1978 as the causative agent of a disease first identified in the UK in 1971. This coronavirus has been widely distributed among laboratories and has been passaged both within pigs and in cell culture. To determine...... the variability between different stocks of the PEDV strain CV777, sequencing of the full-length genome (ca. 28kb) has been performed in 6 different laboratories, using different protocols. Not surprisingly, each of the different full genome sequences were distinct from each other and from the reference sequence...... the analysis of sub-genomic mRNAs from infected cells. It is clearly important to know the features of the specific sample of CV777 being used for experimental studies....

Speciation of Co(II) and Ni(II) in anaerobic bioreactors measured by competitive ligand exchange - adsorptive stripping voltammetry

NARCIS (Netherlands)

Jansen, S.; Steffen, F.; Threels, W.F.; Leeuwen, van H.P.

2005-01-01

Competitive ligand exchange-adsorptive stripping voltammetry is applied to speciation analysis of dissolved Ni(II) and Co(II) in an anaerobic bioreactor and similar batch media. Co and Ni speciation in these media can be measured down to concentration levels of ca. 1 nM. Sulfide interference is

The role of correlations in the determination of the transport properties of LaCl_3 in high temperature molten eutectic LiCl-KCl

International Nuclear Information System (INIS)

Samin, Adib; Wu, Evan; Zhang, Jinsuo

2017-01-01

It is important to develop an accurate assessment of fundamental data of lanthanides in high temperature molten salts to enable an efficient application of pyroprocessing. This requires a careful consideration of uncertainties in the reported results. In this study, cyclic voltammetry (CV) tests of LaCl_3 in KCl-LiCl molten salt were conducted at low concentration levels in the molten salt at 723 K and at several scan rates. The CV signals were subsequently analyzed through the conventional CV analysis and using a BET-based model through a nonlinear least-squares fitting procedure. It was determined that the parameters of the model were strongly correlated and the support plane procedure was implemented to assign joint confidence intervals for the diffusivity of lanthanum. Accounting for the correlations led to a significant increase in the uncertainty of the reported diffusivity which led to better agreement with the literature. Accounting for the correlations may be important for higher concentration levels.

The role of correlations in the determination of the transport properties of LaCl{sub 3} in high temperature molten eutectic LiCl-KCl

Energy Technology Data Exchange (ETDEWEB)

Samin, Adib; Wu, Evan; Zhang, Jinsuo [The Ohio State Univ., Columbus, OH (United States). Dept. of Mechanical and Aerospace Engineering

2017-10-01

It is important to develop an accurate assessment of fundamental data of lanthanides in high temperature molten salts to enable an efficient application of pyroprocessing. This requires a careful consideration of uncertainties in the reported results. In this study, cyclic voltammetry (CV) tests of LaCl{sub 3} in KCl-LiCl molten salt were conducted at low concentration levels in the molten salt at 723 K and at several scan rates. The CV signals were subsequently analyzed through the conventional CV analysis and using a BET-based model through a nonlinear least-squares fitting procedure. It was determined that the parameters of the model were strongly correlated and the support plane procedure was implemented to assign joint confidence intervals for the diffusivity of lanthanum. Accounting for the correlations led to a significant increase in the uncertainty of the reported diffusivity which led to better agreement with the literature. Accounting for the correlations may be important for higher concentration levels.

Characterization of graphene oxide produced by Hummers method and its supercapacitor applications

Energy Technology Data Exchange (ETDEWEB)

Akgül, Ö., E-mail: omeraakgul@gmail.com; Tanrıverdi, A., E-mail: aa.kudret@hotmail.com [Kahramanmaras Sutcu Imam University, Dept. of Physics, 46100 K.Maras-Turkey (Turkey); Alver, Ü., E-mail: ualver@ktu.edu.tr [Karadeniz Technical University, Dept. of Metallurgical and Materials Eng. 61080, Trabzon-Turkey (Turkey)

2016-03-25

In this study, Graphene Oxide (GO) is produced using Hummers method. The produced GO were investigated by x-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), UV-Vis spectrum, Raman spectroscopy and scanning electron microscopy (SEM). GO films on Ni foam were prepared by doctor-blading technique. The electrochemical performances of the as-synthesized GO electrode was evaluated using cyclic voltammetry (CV) in 6 M KOH aqueous solution. Capacitances of GO electrode was measured as 0.76 F/g.

Characterization of graphene oxide produced by Hummers method and its supercapacitor applications

International Nuclear Information System (INIS)

Akgül, Ö.; Tanrıverdi, A.; Alver, Ü.

2016-01-01

In this study, Graphene Oxide (GO) is produced using Hummers method. The produced GO were investigated by x-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), UV-Vis spectrum, Raman spectroscopy and scanning electron microscopy (SEM). GO films on Ni foam were prepared by doctor-blading technique. The electrochemical performances of the as-synthesized GO electrode was evaluated using cyclic voltammetry (CV) in 6 M KOH aqueous solution. Capacitances of GO electrode was measured as 0.76 F/g.

Pyrolytic carbon microelectrodes for impedance based cell sensing

DEFF Research Database (Denmark)

Hassan, Yasmin Mohamed; Caviglia, Claudia; Hemanth, Suhith

2016-01-01

Electrically conductive glass-like carbon structures can be obtained from a polymer template through a pyrolysis process. These structures can be used as electrodes for bio sensing applications such as electrochemical evaluation of cell adhesion and proliferation. This study focuses on the optimi...... to decrease the resistivity of the resulting carbon material and improve the performance in cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Finally, EIS was used to monitor adhesion and proliferation of HeLa cells....

Cyclic voltammetry of ion transfer across a room temperature ionic liquid membrane supported by a microporous filter

Czech Academy of Sciences Publication Activity Database

Langmaier, Jan; Samec, Zdeněk

2007-01-01

Roč. 9, č. 9 (2007), s. 2633-2638 ISSN 1388-2481 R&D Projects: GA AV ČR IAA400400704 Institutional research plan: CEZ:AV0Z40400503 Keywords : room-temperature ionic membrane * cyclic voltammetry * standard Gibbs energy of ion transfer * linear Gibbs energy relationship Subject RIV: CG - Electrochemistry Impact factor: 4.186, year: 2007

Biosynthesized Silver Nanoparticles Used in Preservative Solutions for Chrysanthemum cv. Puma

Directory of Open Access Journals (Sweden)

Luis M. Carrillo-López

2016-01-01

Full Text Available The use of pulse solutions containing antimicrobials has been reported, but more research is necessary. To increase vase life and to study their effect on opening inflorescences, silver nanoparticles were used in vase solutions for cv. Puma Chrysanthemum stems. The nanoparticles were synthesized biologically using Chenopodium ambrosioides L. applied at concentrations of 0.01, 0.05, 0.1, 0.5, 1, and 5 mM and compared with a control. Treatments were replicated five times. The stems were cut to 50 cm and observed until the end of their vase life. Low concentrations of silver nanoparticles promoted inflorescence opening and leaf yellowing, while the control leaves remained green, but there was a lower degree of inflorescence opening. High concentrations of silver nanoparticles (0.5, 1, and 5 mM caused senescence due to low water uptake through the stems. Statistical differences in inflorescence opening and diameter, bacterial growth (CFU mL−1 in vase solutions, fresh weight, water uptake, and vase life were found among treatments. Longer vase life and less weight loss were observed in the stems exposed to low concentrations of silver nanoparticles. Low concentrations of silver nanoparticles promoted inflorescence opening and increased vase life of Chrysanthemum cv. Puma.

Pyrite Passivation by Triethylenetetramine: An Electrochemical Study

Directory of Open Access Journals (Sweden)

Yun Liu

2013-01-01

Full Text Available The potential of triethylenetetramine (TETA to inhibit the oxidation of pyrite in H2SO4 solution had been investigated by using the open-circuit potential (OCP, cyclic voltammetry (CV, potentiodynamic polarization, and electrochemical impedance (EIS, respectively. Experimental results indicate that TETA is an efficient coating agent in preventing the oxidation of pyrite and that the inhibition efficiency is more pronounced with the increase of TETA. The data from potentiodynamic polarization show that the inhibition efficiency (η% increases from 42.08% to 80.98% with the concentration of TETA increasing from 1% to 5%. These results are consistent with the measurement of EIS (43.09% to 82.55%. The information obtained from potentiodynamic polarization also displays that the TETA is a kind of mixed type inhibitor.

Mechanistic modeling of cyclic voltammetry: A helpful tool for understanding biosensor principles and supporting design optimization

DEFF Research Database (Denmark)

Semenova, Daria; Zubov, Alexandr; Silina, Yuliya E.

2018-01-01

Abstract Design, optimization and integration of biosensors hold a great potential for the development of cost-effective screening and point-of-care technologies. However, significant progress in this field can still be obtained on condition that sufficiently accurate mathematical models......, oxidized/reduced forms of the mediator - Prussian Blue/Prussian White). Furthermore, the developed model was applied under various operating conditions as a crucial tool for biosensor design optimization. The obtained qualitative and quantitative dependencies towards amperometric biosensors design...... optimization were independently supported by results of cyclic voltammetry and multi-analytical studies, such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS). Remarkably, a linear...

Toward a hydrogen peroxide sensor for exhaled breath analysis

NARCIS (Netherlands)

Wiedemair, Justyna; van Dorp, Henriëtte; Olthuis, Wouter; van den Berg, Albert

2011-01-01

In this contribution a chip-integrated amperometric sensor for the detection of H2O2 in exhaled breath condensate (EBC) is reported. The electrode chip is characterized, and detection of H2O2 in an aqueous phase is shown by means of cyclic voltammetry (CV) and amperometry. Variation of conditions

STUDI KARAKTERISTIK PERTUMBUHAN DAN PEMBUNGAAN Hippeastrum hybridum hort. cv. ”Red Lion” PADA TANGGAL TANAM YANG BERBEDA

Directory of Open Access Journals (Sweden)

Siti Fatimah Hanum

2012-10-01

Full Text Available Study on growth and flowering characteristic at different planting date done to gain optimum planting date of Hippeastrum hybridum hort.cv.’Red Lion’ at Bali Botanical garden nursery. In this research, three different planting dates, namely July 30, August 30, and September 30 were used. Parameter observed at this experiment was days to first leaf emergence, number of leaves, plant height, Days to flower scape emergence and number of bulblets per plants to know growing character.Number of flowers per scape, diameter of flower, and percent of flowering used to know flower character. It was observed that August planting gives the best result for number of flower per scape, plant height, number of leaves per plants and diameter of flower following by July planting. Late planting meaning September planting did not come out with satisfactory results.

Pengaruh sistem vulkanisasi konvensional (CV dan semi efisien (SEV terhadap sifat aging dan termal vulkanisat campuran karet alam dan karet butil

Directory of Open Access Journals (Sweden)

Arum Yuniari

2015-12-01

Full Text Available The purpose of this research was to study the effect of CV and SEV curing systems on aging and thermal properties of natural rubber and butyl rubber blends. The mixing of rubber and rubber chemicals using two roll-mills and the vulcanization process was carried out by the hydraulic press at 160° C and 150 kg/cm2. The research design used two variations; first, the CV curing system (accelerator/sulfur (1.0/2.5 phr and SEV curing system (accelerator/sulfur (2.1/1.5 phr, second, the ratio of natural rubber/butyl: 100/0; 95/5; 90/10; 85/15; 80/20; 75/25; 70/30; 65/35; 60/40 and 55/45 phr. The parameter observed were tensile strength, elongation at break, hardness before and after aging and thermal properties, e.g.TG/DTA and DSC. The results showed that CV curing systems provided tensile, elongation at break properties gave higher quality and better aging properties. TG/DTA analysis of vulcanizates processed with CV curing systems provided slightly better thermal stability than of the SEV curing system.

A comparative Study of Aptasensor Vs Immunosensor for Label-Free PSA Cancer Detection on GQDs-AuNRs Modified Screen-Printed Electrodes.

Science.gov (United States)

Srivastava, Monika; Nirala, Narsingh R; Srivastava, S K; Prakash, Rajiv

2018-01-31

Label-free and sensitive detection of PSA (Prostate Specific Antigen) is still a big challenge in the arena of prostate cancer diagnosis in males. We present a comparative study for label-free PSA aptasensor and PSA immunosensor for the PSA-specific monoclonal antibody, based on graphene quantum dots-gold nanorods (GQDs-AuNRs) modified screen-printed electrodes. GQDs-AuNRs composite has been synthesized and used as an electro-active material, which shows fast electron transfer and catalytic property. Aptamer or anti-PSA has immobilized onto the surface of modified screen printed electrodes. Three techniques are used simultaneously, viz. cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedence spectroscopy (EIS) to investigate the analytical performance of both PSA aptasensor and PSA immunosensor with its corresponding PSA antigen. Under optimum conditions, both sensors show comparable results with an almost same limit of detection (LOD) of 0.14 ng mL -1 . The results developed with aptasensor and anti-PSA is also checked through the detection of PSA in real samples with acceptable results. Our study suggests some advantages of aptasensor in terms of better stability, simplicity and cost effectiveness. Further our present work shows enormous potential of our developed sensors for real application using voltammetric and EIS techniques simultaneous to get reliable detection of the disease.

Cyclic voltammetry modeling of proton transport effects on redox charge storage in conductive materials: application to a TiO2 mesoporous film.

Science.gov (United States)

Kim, Y S; Balland, V; Limoges, B; Costentin, C

2017-07-21

Cyclic voltammetry is a particularly useful tool for characterizing charge accumulation in conductive materials. A simple model is presented to evaluate proton transport effects on charge storage in conductive materials associated with a redox process coupled with proton insertion in the bulk material from an aqueous buffered solution, a situation frequently encountered in metal oxide materials. The interplay between proton transport inside and outside the materials is described using a formulation of the problem through introduction of dimensionless variables that allows defining the minimum number of parameters governing the cyclic voltammetry response with consideration of a simple description of the system geometry. This approach is illustrated by analysis of proton insertion in a mesoporous TiO 2 film.

Limited geographic distribution of the novel cyclovirus CyCV-VN

NARCIS (Netherlands)

Le, Van Tan; de Jong, Menno D.; Nguyen, Van Kinh; Nguyen, Vu Trung; Taylor, Walter; Wertheim, Heiman F. L.; van der Ende, Arie; van der Hoek, Lia; Canuti, Marta; Crusat, Martin; Sona, Soeng; Nguyen, Hanh Uyen; Giri, Abhishek; Nguyen, Thi Thuy Chinh Bkrong; Ho, Dang Trung Nghia; Farrar, Jeremy; Bryant, Juliet E.; Tran, Tinh Hien; Nguyen, Van Vinh Chau; van Doorn, H. Rogier

2014-01-01

A novel cyclovirus, CyCV-VN, was recently identified in cerebrospinal fluid (CSF) from patients with central nervous system (CNS) infections in central and southern Vietnam. To explore the geographic distribution of this novel virus, more than 600 CSF specimens from patients with suspected CNS

Fox grape cv. Bordô (Vitis labrusca L. and grapevine cv. Chardonnay (Vitis vinifera L. cultivated in vitro under different carbohydrates, amino acids and 6-Benzylaminopurine levels

Directory of Open Access Journals (Sweden)

Dayse Cristina de Carvalho

2013-04-01

Full Text Available The aim of this work was to study the influence of sucrose and glucose, amino acids and BAP (6-Benzylaminopurine levels on in vitro shoot regeneration of fox grape cv. Bordô and grapevine cv. Chardonnay. The nodal segments from micropropagated material were used as explants and half-strength MS medium as the basal medium. Sucrose and glucose at 15, 30 and 45 g.L-1 were tested as a carbon source and the supplementation of adenine, asparagine, alanine, glycine, cysteine, glutamine, arginine was tested at 40 g.L-1. The BAP levels (1 and 5 μM in solid and double-phase media were evaluated and compared with a control medium without BAP. Bordô had best in vitro growth than Chardonnay. Sucrose was a better carbohydrate source than glucose for both the cultivars. Bordô and Chardonnay had different amino acid preferences for some parameters. In conclusion, for in vitro shoot regeneration from the nodal segments, culture on solid medium with 5 μM BAP, 15 g.L-1 sucrose for Bordô and 45 g.L-1 sucrose for Chardonnay showed better results. Similarly, the supplementation of 40 g.L-1 arginine for Bordô and 40 g.L-1 arginine or glycine for Chardonnay showed better results.

Molecular imprinted polypyrrole modified glassy carbon electrode for the determination of tobramycin

International Nuclear Information System (INIS)

Gupta, Vinod Kumar; Yola, Mehmet Lütfi; Özaltın, Nuran; Atar, Necip; Üstündağ, Zafer; Uzun, Lokman

2013-01-01

Graphical abstract: Atomic force microscopic images of (A) bare GCE and (B) TOB imprinted PPy/GCE surface. - Highlights: • Glassy carbon electrode based on molecularly imprinted polypyrrole was prepared. • The developed surfaces were characterized by AFM, FTIR, EIS and CV. • The developed nanosensor was applied to egg and milk samples. - Abstract: Over the past two decades, molecular imprinted polymers have attracted a broad interest from scientists in sensor development. In the preparation of molecular imprinted polymers the desired molecule (template) induces the creation of specific recognition sites in the polymer. In this study, the glassy carbon electrode (GCE) based on molecularly imprinted polypyrrole (PPy) was fabricated for the determination of tobramycin (TOB). The developed electrode was prepared by incorporation of a template molecule (TOB) during the electropolymerization of pyrrole on GCE in aqueous solution using cyclic voltammetry (CV) method. The performance of the imprinted and non-imprinted electrodes was evaluated by square wave voltammetry (SWV). The effect of pH, monomer and template concentrations, electropolymerization cycles on the performance of the imprinted and non-imprinted electrodes was investigated and optimized. The non-modified and TOB-imprinted surfaces were characterized by using atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), electrochemical impedance spectroscopy (EIS) and CV. The linearity range of TOB was 5.0 × 10 −10 –1.0 × 10 −8 M with the detection limit of 1.4 × 10 −10 M. The developed nanosensor was applied successfully for the determination of TOB in egg and milk

C-V characterization of Schottky- and MIS-gate SiGe/Si HEMT structures

International Nuclear Information System (INIS)

Onojima, Norio; Kasamatsu, Akihumi; Hirose, Nobumitsu; Mimura, Takashi; Matsui, Toshiaki

2008-01-01

Electrical properties of Schottky- and metal-insulator-semiconductor (MIS)-gate SiGe/Si high electron mobility transistors (HEMTs) were investigated with capacitance-voltage (C-V) measurements. The MIS-gate HEMT structure was fabricated using a SiN gate insulator formed by catalytic chemical vapor deposition (Cat-CVD). The Cat-CVD SiN thin film (5 nm) was found to be an effective gate insulator with good gate controllability and dielectric properties. We previously investigated device characteristics of sub-100-nm-gate-length Schottky- and MIS-gate HEMTs, and reported that the MIS-gate device had larger maximum drain current density and transconductance (g m ) than the Schottky-gate device. The radio frequency (RF) measurement of the MIS-gate device, however, showed a relatively lower current gain cutoff frequency f T compared with that of the Schottky-gate device. In this study, C-V characterization of the MIS-gate HEMT structure demonstrated that two electron transport channels existed, one at the SiGe/Si buried channel and the other at the SiN/Si surface channel

C-V characterization of Schottky- and MIS-gate SiGe/Si HEMT structures

Energy Technology Data Exchange (ETDEWEB)

Onojima, Norio [National Institute of Information and Communications Technology (NICT), Koganei, Tokyo 184-8795 (Japan)], E-mail: nonojima@nict.go.jp; Kasamatsu, Akihumi; Hirose, Nobumitsu [National Institute of Information and Communications Technology (NICT), Koganei, Tokyo 184-8795 (Japan); Mimura, Takashi [National Institute of Information and Communications Technology (NICT), Koganei, Tokyo 184-8795 (Japan); Fujitsu Laboratories Ltd., Atsugi, Kanagawa 243-0197 (Japan); Matsui, Toshiaki [National Institute of Information and Communications Technology (NICT), Koganei, Tokyo 184-8795 (Japan)

2008-07-30

Electrical properties of Schottky- and metal-insulator-semiconductor (MIS)-gate SiGe/Si high electron mobility transistors (HEMTs) were investigated with capacitance-voltage (C-V) measurements. The MIS-gate HEMT structure was fabricated using a SiN gate insulator formed by catalytic chemical vapor deposition (Cat-CVD). The Cat-CVD SiN thin film (5 nm) was found to be an effective gate insulator with good gate controllability and dielectric properties. We previously investigated device characteristics of sub-100-nm-gate-length Schottky- and MIS-gate HEMTs, and reported that the MIS-gate device had larger maximum drain current density and transconductance (g{sub m}) than the Schottky-gate device. The radio frequency (RF) measurement of the MIS-gate device, however, showed a relatively lower current gain cutoff frequency f{sub T} compared with that of the Schottky-gate device. In this study, C-V characterization of the MIS-gate HEMT structure demonstrated that two electron transport channels existed, one at the SiGe/Si buried channel and the other at the SiN/Si surface channel.

Experimental and theoretical evaluation on the microenvironmental effect of dimethyl sulfoxide on adrenaline in acid aqueous solution

Science.gov (United States)

Yu, Zhang-Yu; Liu, Tao; Guo, Dao-Jun; Liu, Yong-Jun; Liu, Cheng-Bu

2010-12-01

The microenvironmental effect of dimethyl sulfoxide (DMSO) on adrenaline was studied by several approaches including the cyclic voltammetry (CV) of adrenaline at a platinum electrode in acid aqueous solution, the chemical shift of 1H nuclear magnetic resonance ( 1H NMR) of adrenaline, and the change of diffusion coefficient of adrenaline. The experimental results demonstrated that DMSO has significant microenvironmental effect on adrenaline, which was confirmed by the density functional theory (DFT) study on the hydrogen bond (H-bond) complexes of adrenaline with water and DMSO.

Possibility of Recombination Gain Increase in CV Ions at 4.0 nm Via Coherence

Science.gov (United States)

Luo, Y.; Morozov, A.; Gordon, D.; Sprangle, P.; Svidzinsky, A.; Xia, H.; Scully, M.; Suckewer, S.

This paper is about the recent experimental results on amplification of the CV line in the "water window" at 4.03 nm from resonance transition to the ground level of He-like ions in recombination scheme. The indication of the amplification of the CV line has been observed when an elongated narrow plasma channel was created, where high intensity 100 fs beams, optimal for creating CV ions in high density plasma, was propagated up to 0.5-0.6 mm. Without channeling the effective plasma length was much shorter and there was no indication of amplification.The large interest in gain generation in He-like ions in the transition to ground state is due to the possibility of applying a recently developed theory of Lasing Without Inversion (LWI) in XUV and X-ray regions to largely increase the gain for such transitions. The presented results of the indication of CV line amplifications are being discussed from the point of view of using LWI as a superradiance gain increase, hence to construct a very compact soft X-ray laser in the "water window".The last part of the paper is related to the application of the ultra-intensive fs plasma laser, which is currently in the process of development by using stimulated Raman backscattering (SRBS) to create a plasma amplifier and compressor, as the pump for compact laser operating in the "water window" and also at shorter wavelengths.

Parameters affecting the determination of paraquat at silver rotating electrodes using differential pulse voltammetry

Directory of Open Access Journals (Sweden)

A. Farahi

2014-08-01

Full Text Available The electrochemical determination of aqueous paraquat PQ(II by differential pulse voltammetry at a solid rotating silver electrode (RSE is described. The aim of this work is to optimize all factors that can influence this determination. Potential wave forms, potential scan parameters and deposition time were examined for their effect on the paraquat peak shape and intensity. The best responses were obtained with differential pulse voltammetry in 0.1 mol L−1 Na2SO4 as supporting electrolyte using amplitude 50 mV, scan increment 5 mV, deposition time 120 s, frequency 50 s−1 and step amplitude 0.05 V. Electrochemical and mechanical surface cleaning, aimed at removing the amount of paraquat deposited onto the silver surface, were necessary for obtaining a good performance of the electrode. Response linearity, repeatability, accuracy and detection limit were also evaluated. The obtained detection limits were 7.1 × 10−9 mol L−1 and 2.8 × 10−9 mol L−1 for peak 1 and peak 2 respectively. The relative standard deviation (RSD was found to be 1.19% in 1.0 × 10−4 mol L−1 paraquat. The applicability of the RSE for PQ(II determination in milk samples, without any sample pretreatment, was successfully demonstrated.

Embedded 32-bit Differential Pulse Voltammetry (DPV) Technique for 3-electrode Cell Sensing

Science.gov (United States)

N, Aqmar N. Z.; Abdullah, W. F. H.; Zain, Z. M.; Rani, S.

2018-03-01

This paper addresses the development of differential pulse voltammetry (DPV) embedded algorithm using an ARM cortex processor with new developed potentiostat circuit design for in-situ 3-electrode cell sensing. This project is mainly to design a low cost potentiostat for the researchers in laboratories. It is required to develop an embedded algorithm for analytical technique to be used with the designed potentiostat. DPV is one of the most familiar pulse technique method used with 3-electrode cell sensing in chemical studies. Experiment was conducted on 10mM solution of Ferricyanide using the designed potentiostat and the developed DPV algorithm. As a result, the device can generate an excitation signal of DPV from 0.4V to 1.2V and produced a peaked voltammogram with relatively small error compared to the commercial potentiostat; which is only 6.25% difference in peak potential reading. The design of potentiostat device and its DPV algorithm is verified.

Connected Vehicle Pilot Deployment Program, Comprehensive Installation Plan - WYDOT CV Pilot

Science.gov (United States)

2018-02-16

The Wyoming Department of Transportation's (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication technology to re...

Synthesis, characterization and application of Li3Fe2(PO4)3 nanoparticles as cathode of lithium-ion rechargeable batteries

Science.gov (United States)

Karami, Hassan; Taala, Foroozandeh

2011-08-01

This work introduces a new method to synthesize Li3Fe2(PO4)3 nanoparticles in the nanopowder form and study its electrochemical performance by cyclic voltammetry and battery tests. Li3Fe2(PO4)3 is synthesized by the gel combustion method based on polyvinyl alcohol (PVA) as gel making agent. The optimum conditions of the synthesis include 8 wt% PVA, 0.34 wt% lithium slat, 1 wt% iron salt, 0.57 wt% ammonium dihydrogen phosphate, ethanol-water 50:50 as solvent, 675 °C combustion temperature and 4 h combustion time. Characterization of the samples is performed by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), EDX analysis, XRD patterns, BET specific surface area and DSL size distribution. In the optimum conditions, a nanopowder is obtained that consisting of uniform nanoparticles with an average diameter of 70 nm. The optimized sample shows 12.5 m2 g-1 specific surface areas. Cyclic voltammetry (CV) studies show that the synthesized compound has good reversibility and high cyclic stability. The CV results are confirmed by the battery tests. The obtained results show that the synthesized cathodic material has high practical discharge capacity (average 125.5 mAh g-1 approximately same with its theoretical capacity 128.2 mA h-1) and long cycle life.

Pembuatan Dokumen Sop Keamanan Aset Informasi Yang Mengacu Pada Kontrol Kerangka Kerja Iso 27002:2013 (Studi Kasus : Cv Cempaka Tulungagung

Directory of Open Access Journals (Sweden)

Dheni Indra Rachmawan

2017-03-01

Full Text Available Dalam mendukung proses bisnis utamanya, suatu organisasi membutuhkan adanya dukungan teknologi informasi. Penggunaan Teknologi Informasi di banyak perusahaan telah menjadi satu hal penting dalam meningkatkan efektifitas dan efisiensi operasional bisnis yang mendukung tercapainya tujuan perusahaan, termasuk juga pada CV Cempaka Tulungagung. Dalam memenuhi kebutuhan keamanan aset informasi tersebut maka diperlukan adanya sebuah tata kelola dalam bentuk dokumen SOP (Standard Operating Procedure keamanan aset informasi untuk mengurangi adanya ancaman dan risiko serta untuk mendukung penyelarasan pencapaian tujuan organisasi dalam proses bisnisnya. Metode penelitian yang digunakan yaitu OCTAVE sebagai pengolah hasil informasi yang didapatkan dari wawancara dan FMEA digunakan untuk menghitung seberapa tinggi dampak untuk perusahaan jika risiko itu terjadi dan membuat ranking prioritas untuk masing-masing risiko. Kemudian basis yang digunakan dalam membuat prosedur kendali akses aset informasi sebagai manajemen risiko adalah kerangka kerja ISO/IEC:27002:2013. Dalam penelitian ini, hasil akhir yang didapatkan adalah sebuah dokumen SOP yang sesuai dengan kebutuhan keamanan informasi bagi perusahaan CV Cempaka berdasarkan pada kontrol kerangka kerja ISO27002:2013.

Novel Ag@TiO2 nanocomposite synthesized by electrochemically active biofilm for nonenzymatic hydrogen peroxide sensor.

Science.gov (United States)

Khan, Mohammad Mansoob; Ansari, Sajid Ali; Lee, Jintae; Cho, Moo Hwan

2013-12-01

A novel nonenzymatic sensor for H2O2 was developed based on an Ag@TiO2 nanocomposite synthesized using a simple and cost effective approach with an electrochemically active biofilm. The optical, structural, morphological and electrochemical properties of the as-prepared Ag@TiO2 nanocomposite were examined by UV-vis spectroscopy, X-ray diffraction, transmission electron microscopy and cyclic voltammetry (CV). The Ag@TiO2 nanocomposite was fabricated on a glassy carbon electrode (GCE) and their electrochemical performance was analyzed by CV, differential pulse voltammetry and electrochemical impedance spectroscopy. The Ag@TiO2 nanocomposite modified GCE (Ag@TiO2/GCE) displayed excellent performance towards H2O2 sensing at -0.73 V in the linear response range from 0.83 μM to 43.3 μM, within a detection limit and sensitivity of 0.83 μM and ~65.2328±0.01 μA μM(-1) cm(-2), respectively. In addition, Ag@TiO2/GCE exhibited good operational reproducibility and long term stability. © 2013.

EVALUASI SISTEM INFORMASI PERSEDIAAN PADA CV. SARANA TELEMAXINDO

Directory of Open Access Journals (Sweden)

Nelly Nelly

2010-10-01

Full Text Available Evaluation objectives of inventory information systems at CV. Facilities Telemaxindo was to evaluate the weaknesses of the implementation of internal control, as well as estimating and assessing possible risks that might arise. The research method used is literature study of reference books in the library, and field study consisted of observation, interviews with relevant parties, creating check lists, check the inventory information systems documentation, and testing of inventory application systems. The results are findings of control weaknesses in the implementation of security management, operational management control, boundary control, input control, and output control on the present inventory information system. These weaknesses could pose a risk and if not dealt soon it could hurt the company. The resulting conclusion of the security management control, boundary control, control input, and output control is not running well so that it needs to be improved in accordance with the recommendations, while operational management control has been running fairly well.Keywords: evaluation, information system, inventory

Substituent Inductive Effects on the Electrochemical Oxidation of Flavonoids Studied by Square Wave Voltammetry and Ab Initio Calculations.

Science.gov (United States)

Arroyo-Currás, Netzahualcóyotl; Rosas-García, Víctor M; Videa, Marcelo

2016-10-27

Flavonoids are natural products commonly found in the human diet that show antioxidant, anti-inflammatory and anti-hepatotoxic activities. These nutraceutical properties may relate to the electrochemical activity of flavonoids. To increase the understanding of structure-electrochemical activity relations and the inductive effects that OH substituents have on the redox potential of flavonoids, we carried out square-wave voltammetry experiments and ab initio calculations of eight flavonoids selected following a systematic variation in the number of hydroxyl substituents and their location on the flavan backbone: three flavonols, three anthocyanidins, one anthocyanin and the flavonoid backbone flavone. We compared the effect that the number of -OH groups in the ring B of flavan has on the oxidation potential of the flavonoids considered, finding linear correlations for both flavonols and anthocyanidins ( R 2 = 0.98 ). We analyzed the effects that position and number of -OH substituents have on electron density distributions via ab initio quantum chemical calculations. We present direct correlations between structural features and oxidation potentials that provide a deeper insight into the redox chemistry of these molecules.

A Low Cost C8051F006 SoC-Based Quasi-Static C-V Meter for Characterizing Semiconductor Devices

Directory of Open Access Journals (Sweden)

Khairurrijal Khairurrijal

2012-12-01

Full Text Available Based on a C8051F006 SoC (system on-a-chip, a simple and low cost quasi-static capacitance-voltage (C-V meter was designed and developed to obtain C-V characteristics of semiconductor devices. The developed C-V meter consists of a capacitance meter, a programmable voltage source, a C8051F006 SoC-based slave controller, and a personal computer (PC as a master controller. The communication between the master and slave controllers is facilitated by the RS 232 serial communication. The accuracy of the C-V meter was guaranteed by the calibration functions, which are employed by the program in the PC and obtained through the calibration processes of analog to digital converter (ADC, digital to analog converters (DACs of the C8051F006 SoC, and the programmable voltage source. Examining 33-pF and 1000-pF capacitors as well three different p-n junction diodes, it was found that the capacitances of common capacitors are in the range of specified values and typical C-V curves of p-n junction diodes are achieved.

A new immuno- dystrophin-deficient model, the NSG-mdx4Cv mouse, provides evidence for functional improvement following allogeneic satellite cell transplantation

Science.gov (United States)

Arpke, Robert W.; Darabi, Radbod; Mader, Tara L.; Zhang, Yu; Toyama, Akira; Lonetree, Cara-lin; Nash, Nardina; Lowe, Dawn A.; Perlingeiro, Rita C.R.; Kyba, Michael

2013-01-01

Transplantation of a myogenic cell population into an immunodeficient recipient is an excellent way of assessing the in vivo muscle-generating capacity of that cell population. To facilitate both allogeneic and xenogeneic transplantations of muscle-forming cells in mice we have developed a novel immunodeficient muscular dystrophy model, the NSG-mdx4Cv mouse. The IL2Rg mutation, which is linked to the Dmd gene on the X chromosome, simultaneously depletes NK cells and suppresses thymic lymphomas, issues that limit the utility of the SCID/mdx model. The NSG-mdx4Cv mouse presents a muscular dystrophy of similar severity to the conventional mdx mouse. We show that this animal supports robust engraftment of both pig and dog muscle mononuclear cells. The question of whether satellite cells prospectively isolated by flow cytometry can confer a functional benefit upon transplantation has been controversial. Using allogeneic Pax7-ZsGreen donors and NSG-mdx4Cv recipients, we demonstrate definitively that as few as 900 FACS-isolated satellite cells can provide functional regeneration in vivo, in the form of an increased mean maximal force-generation capacity in cell-transplanted muscles, compared to a sham-injected control group. These studies highlight the potency of satellite cells to improve muscle function, and the utility of the NSG-mdx4Cv model for studies on muscle regeneration and Duchenne muscular dystrophy therapy. PMID:23606600

Immediate Effect of Needling at CV-12 (Zhongwan) Acupuncture Point on Blood Glucose Level in Patients with Type 2 Diabetes Mellitus: A Pilot Randomized Placebo-Controlled Trial.

Science.gov (United States)

Kumar, Ranjan; Mooventhan, A; Manjunath, Nandi Krishnamurthy

2017-08-01

Diabetes mellitus is a major global health problem. Needling at CV-12 has reduced blood glucose level in diabetic rats. The aim of this study was to evaluate the effect of needling at CV-12 (Zhongwan) on blood glucose level in patients with type 2 diabetes mellitus (T2DM). Forty T2DM patients were recruited and randomized into either the acupuncture group or placebo control group. The participants in the acupuncture group were needled at CV-12 (4 cun above the center of the umbilicus), and those in the placebo control group were needled at a placebo point on the right side of the abdomen (1 cun beside the CV-12). For both groups, the needle was retained for 30 minutes. Assessments were performed prior to and after the intervention. Statistical analysis was performed using SPSS version 16. There was a significant reduction in random blood glucose level in the acupuncture group compared to baseline. No such significant change was observed in the placebo control group. The result of this study suggests that 30 minutes of needling at CV-12 might be useful in reducing blood glucose level in patients with T2DM. Copyright © 2017. Published by Elsevier B.V.

Innovative application of AC-voltammetry in the characterization of oxides nanolayers formed on metals, under the effect of AC-perturbations

Energy Technology Data Exchange (ETDEWEB)

Bueno, V.; Lazzari, L.; Ormellesse, M. [Politecnico di Milano, Milan (Italy). Dept. of Chemistry, Materials and Chemical Engineering; Spinelli, P. [Politecnico di Torino, Torino (Italy). Dept. of Materials Science and Chemical Engineering

2008-07-01

Stray AC-currents have been reported to cause many cases of unwanted corrosion on metallic structures. This study characterized the formation and stability of the surface oxide film formed on mild steel under the effect of AC voltage in a very basic environment. The response of the system to DC signals was examined, along with its reversibility to AC perturbations. SEM analysis was used to complement AC-Voltammetry. Reaction mechanisms responsible for the AC-corrosion were formulated. AC-Voltammetry involves the application of a controlled sinusoidal voltage onto a solid working electrode while it is being swept in a DC-voltage range, with the faradaic or capacitative components of the resulting AC-current being recorded. The innovative aspect is the application of AC-V to characterize its nano-surface while it is being affected by AC-signals. It was concluded that the AC-V can be useful for the study of redox processes occurring at the surface of a reactive electrode and for the application of a considerable AC perturbation to the electrode in a potentiostatically controlled way. According to the electrochemistry of the double layer, there are 3 main reactions in the NaOH 1M media that are not reversible to DC nor to AC perturbations in the range of cathodic protection of mild steel. When designing metallic systems susceptible to stray currents, the AC-V could quantify the final faradaic, resistive and capacitative responses. 6 refs., 1 fig.

Cherry Picking Robot Vision Recognition System Based on OpenCV

Directory of Open Access Journals (Sweden)

Zhang Qi Rong

2016-01-01

Full Text Available Through OpenCV function, the cherry in a natural environment image after image preprocessing, color recognition, threshold segmentation, morphological filtering, edge detection, circle Hough transform, you can draw the cherry’s center and circular contour, to carry out the purpose of the machine picking. The system is simple and effective.

CvADH1, a member of short-chain alcohol dehydrogenase family, is inducible by gibberellin and sucrose in developing watermelon seeds.

Science.gov (United States)

Kim, Joonyul; Kang, Hong-Gyu; Jun, Sung-Hoon; Lee, Jinwon; Yim, Jieun; An, Gynheung

2003-01-01

To understand the molecular mechanisms that control seed formation, we selected a seed-preferential gene (CvADH1) from the ESTs of developing watermelon seeds. RNA blot analysis and in situ localization showed that CvADH1 was preferentially expressed in the nucellar tissue. The CvADH1 protein shared about 50% homology with short-chain alcohol dehydrogenase including ABA2 in Arabidopsis thaliana, stem secoisolariciresinol dehydrogenase in Forsythia intermedia, and 3beta-hydroxysterol dehydrogenase in Digitalis lanata. We investigated gene-expression levels in seeds from both normally pollinated fruits and those made parthenocarpic via N-(2-chloro-4-pyridyl)-N'-phenylurea treatment, the latter of which lack zygotic tissues. Whereas the transcripts of CvADH1 rapidly started to accumulate from about the pre-heart stage in normal seeds, they were not detectable in the parthenocarpic seeds. Treating the parthenogenic fruit with GA(3) strongly induced gene expression, up to the level accumulated in pollinated seeds. These results suggest that the CvADH1 gene is induced in maternal tissues by signals made in the zygotic tissues, and that gibberellin might be one of those signals. We also observed that CvADH1 expression was induced by sucrose in the parthenocarpic seeds. Therefore, we propose that the CvADH1 gene is inducible by gibberellin, and that sucrose plays an important role in the maternal tissues of watermelon during early seed development.

Stripping voltammetry glassy carbon on the study of Cd and Pb heavy metals pollution using anadara antiquata linn bioindicator

International Nuclear Information System (INIS)

Iswani, G.S.; Hidayat, F.; Zulkarnaen, A.

1996-01-01

The presence of cadmium and lead in sea water and shell fish (anadara antiquata linn) bioindicator in Gresik waters by glassy carbon stripping voltammetry was studied at menu 2 parameters as follows: time and potential plating-1000V and 90 second, sweep rate: 375 mV/second, strip time 2 second, electrolyte: aquatrides, pH = 0.4 (for shell fish) and -1000 V and 120 second, 999 mV/se con, 2 second, chloracetic, pH = 5.0. It was found that the mean of Cd and Pb contents in sea water at pH = 7.0, salinity = 28-29 ppm, oxygen content = 7.1-8.1 and temperature = 27-30 o C which was monitoring at location 1.2 and location 3.4 were 0.01 and 0.17 ppm, 1.44 and 1.35 ppm respectively. Furthermore the mean of Cd and Pb contents in shell fish at location 1.2 and 3.4 (snail range and shell fish dry weight were reported) were 5.94 and 3.05 ppm, 0,03 and 0,03 ppm. The t-tes for Cd and Pb contents in sea waters and shell fish at location 1,2 compared with location 3.4 were significant and no significant. The accuracy of the method was tested with SRM coppepoda MA-A-1-A-a and W-4. (author)

Camera calibration method of binocular stereo vision based on OpenCV

Science.gov (United States)

Zhong, Wanzhen; Dong, Xiaona

2015-10-01

Camera calibration, an important part of the binocular stereo vision research, is the essential foundation of 3D reconstruction of the spatial object. In this paper, the camera calibration method based on OpenCV (open source computer vision library) is submitted to make the process better as a result of obtaining higher precision and efficiency. First, the camera model in OpenCV and an algorithm of camera calibration are presented, especially considering the influence of camera lens radial distortion and decentering distortion. Then, camera calibration procedure is designed to compute those parameters of camera and calculate calibration errors. High-accurate profile extraction algorithm and a checkboard with 48 corners have also been used in this part. Finally, results of calibration program are presented, demonstrating the high efficiency and accuracy of the proposed approach. The results can reach the requirement of robot binocular stereo vision.

Investigation of the Antioxidant Properties of Metallothionein in Transgenic Tobacco Plants using Voltammetry at a Carbon Paste Electrode

Czech Academy of Sciences Publication Activity Database

Shetivska, V.; Adam, V.; Prášek, J.; Macek, Tomáš; Macková, M.; Havel, L.; Dioplan, V.; Zehnálek, J.; Hubálek, J.; Kižek, R.

2011-01-01

Roč. 6, č. 7 (2011), s. 2869-2883 ISSN 1452-3981 Grant - others:GA ČR(CZ) GA522/07/0692; GA ČR(CZ) GA102/08/1546 Institutional research plan: CEZ:AV0Z40550506 Keywords : square wave voltammetry * carbon paste electrode * DNA * metallothionein Subject RIV: CG - Electrochemistry Impact factor: 3.729, year: 2011

Canine Circovirus 1 (CaCV-1) and Canine Parvovirus 2 (CPV-2): Recurrent Dual Infections in a Papillon Breeding Colony.

Science.gov (United States)

Thaiwong, T; Wise, A G; Maes, R K; Mullaney, T; Kiupel, M

2016-11-01

Recurrent outbreaks of sudden death and bloody diarrhea were reported in March 2013 and February 2014 in a breeding colony of Papillon dogs. During the first outbreak, 1 adult dog and 2 eight-month-old puppies died. During the second outbreak, 2 ten-week-old puppies died. One puppy from the first outbreak and 2 puppies from the second outbreak were examined at necropsy. Histologically, all 3 puppies had severe segmental crypt necrosis of the small intestine and marked lymphoid follicle depletion in the spleen and Peyer's patches. Real-time (RT) polymerase chain reaction (PCR) demonstrated abundant canine parvovirus (CPV-2) DNA (Ctcanine circovirus 1 (CaCV-1). Very high levels of CaCV-1 DNA (Ct<13) were detected in small intestine, lymph nodes, and spleen. In situ hybridization for CaCV-1 detected rare positive nuclei of regenerating crypt epithelium but abundant amounts of CaCV-1 nucleic acid in the cytoplasm and nuclei of histiocytes in all lymphoid tissues, including granulomatous inflammatory foci and hepatic Kupffer cells. Significant levels of CaCV-1 DNA were detected in blood and serum (Ct as low as 13) but not feces from 3 surviving dogs at 2 months or 1 year after the outbreak, respectively. We hypothesize that CPV-2 infection predisposed dogs to CaCV-1 infection and ultimately resulted in more severe clinical disease. © The Author(s) 2016.

OpenCV 3.0 computer vision with Java

CERN Document Server

Baggio, Daniel Lélis

2015-01-01

If you are a Java developer, student, researcher, or hobbyist wanting to create computer vision applications in Java then this book is for you. If you are an experienced C/C++ developer who is used to working with OpenCV, you will also find this book very useful for migrating your applications to Java. All you need is basic knowledge of Java, with no prior understanding of computer vision required, as this book will give you clear explanations and examples of the basics.

Electrocatalytic oxidation of K₄[Fe(CN)₆] by metal-reducing bacteriumShewanella oneidensis MR-1

DEFF Research Database (Denmark)

Zheng, Zhiyong; Xiao, Yong; Wu, Ranran

2017-01-01

of an inorganic redox compound K4[Fe(CN)6]. A pair of symmetric peak in the cyclic voltammetry (CV) of K4[Fe(CN)6] were found on bare glassy carbon electrode (GCE). Surprisingly, when the GCE is coated MR-1, the anodic peak almost sustained at the same level; while the cathodic peak apparently shrunk. We...

Self-assembly of the second-generation of nitroaryl-ended dendrons onto carbon

International Nuclear Information System (INIS)

Farías, E.D.; Paez, J.I.; Strumia, M.C.; Baruzzi, A.M.; Passeggi Jr, M.C.G.; Brunetti, V.

2014-01-01

Graphical abstract: - Abstract: We report the self-assembly of the second-generation of nitroaryl-ended dendrons onto carbon surfaces. The immobilized layer was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy and atomic force microscopy (AFM). The response was analyzed in comparison to the first-generation dendron behavior. Reduction of both layers generates the hydroxylamine product. The resulting redox-active layer exhibits a well-behaved redox response for the adsorbed nitroso/hydroxylamine couple. The thermodynamic of the adsorption of both dendrons on glassy carbon electrodes was also studied by CV. The Frumkin adsorption isotherm was the best to describe the specific interactions. The AFM images showed a network film formation with embedded aggregates that completely covered the carbon surface. The average height suggests a tilted preferential adsorption for both molecules

Electrochemical behavior of Th(IV) and its electrodeposition from ThF_4-LiCl-KCl melt

International Nuclear Information System (INIS)

Wang, Xianbin; Huang, Wei; Gong, Yu; Jiang, Feng; Zheng, Haiyang; Zhu, Tiejian; Long, Dewu; Li, Qingnuan

2016-01-01

The electrochemical behavior of Th(IV) ion on molybdenum (Mo) electrode was studied by cyclic voltammetry (CV) and square wave voltammetry (SWV) technologies at 773 K in ThF_4-LiCl-KCl melt. The reduction of Th(IV) to metal Th at −1.67 V (vs. Ag/AgCl) is a four-electron exchange process, which is quasi-reversible and diffusion-controlled. The diffusion coefficient (D) and activation energy of diffusion process for Th(IV) were determined to be 3.77 × 10"−"5 cm"2 s"−"1 and 59.2 kJ mol"−"1. The pulse potential electrolysis of ThF_4-LiCl-KCl melt revealed that 86.8% of Th(IV) can be separated from the melt based on the inductively coupled plasma atomic emission spectrometer (ICP-AES) results.

Spillover effect induced Pt-TiO2/C as ethanol tolerant oxygen reduction reaction catalyst for direct ethanol fuel cells

International Nuclear Information System (INIS)

Meenakshi, S.; Nishanth, K.G.; Sridhar, P.; Pitchumani, S.

2014-01-01

Hypo-hyper-d-electronic interactive nature is used to develop a new carbon supported HT-Pt-TiO 2 composite catalyst comprising Pt and Ti in varying atomic ratio, namely 1:1, 2:1 and 3:1. The electro-catalysts are characterized by XRD, TEM, SEM-EDAX, Cyclic Voltammetry (CV) and Linear sweep voltammetry (LSV) techniques. HT-Pt-TiO 2 /C catalysts exhibit significant improvement in oxygen reduction reaction (ORR) over Pt/C. The effect of composition towards ORR with and without ethanol has been studied. The direct ethanol fuel cell (DEFC) with HT-Pt-TiO 2 /C cathode catalyst exhibits an enhanced peak power density of 41 mW cm −2 , whereas 21 mW cm −2 is obtained for the DEFCs with carbon-supported Pt catalyst operating under identical conditions

Epitaxial growth by monolayer restricted galvanic displacement

Directory of Open Access Journals (Sweden)

Vasilić Rastko

2012-01-01

Full Text Available The development of a new method for epitaxial growth of metals in solution by galvanic displacement of layers pre-deposited by underpotential deposition (UPD was discussed and experimentally illustrated throughout the lecture. Cyclic voltammetry (CV and scanning tunneling microscopy (STM are employed to carry out and monitor a “quasi-perfect”, two-dimensional growth of Ag on Au(111, Cu on Ag(111, and Cu on Au(111 by repetitive galvanic displacement of underpotentially deposited monolayers. A comparative study emphasizes the displacement stoichiometry as an efficient tool for thickness control during the deposition process and as a key parameter that affects the deposit morphology. The excellent quality of layers deposited by monolayer-restricted galvanic displacement is manifested by a steady UPD voltammetry and ascertained by a flat and uniform surface morphology maintained during the entire growth process.

Fast Selective Detection of Pyocyanin Using Cyclic Voltammetry

Science.gov (United States)

Alatraktchi, Fatima AlZahra’a; Breum Andersen, Sandra; Krogh Johansen, Helle; Molin, Søren; Svendsen, Winnie E.

2016-01-01

Pyocyanin is a virulence factor uniquely produced by the pathogen Pseudomonas aeruginosa. The fast and selective detection of pyocyanin in clinical samples can reveal important information about the presence of this microorganism in patients. Electrochemical sensing of the redox-active pyocyanin is a route to directly quantify pyocyanin in real time and in situ in hospitals and clinics. The selective quantification of pyocyanin is, however, limited by other redox-active compounds existing in human fluids and by other metabolites produced by pathogenic bacteria. Here we present a direct selective method to detect pyocyanin in a complex electroactive environment using commercially available electrodes. It is shown that cyclic voltammetry measurements between −1.0 V to 1.0 V reveal a potential detection window of pyocyanin of 0.58–0.82 V that is unaffected by other redox-active interferents. The linear quantification of pyocyanin has an R2 value of 0.991 across the clinically relevant concentration range of 2–100 µM. The proposed method was tested on human saliva showing a standard deviation of 2.5% ± 1% (n = 5) from the known added pyocyanin concentration to the samples. This inexpensive procedure is suggested for clinical use in monitoring the presence and state of P. aeruginosa infection in patients. PMID:27007376

Voltammetric behavior of amfepramone (diethylpropion) at the hanging mercury drop electrode and its analytical determination in pharmaceutical formulations

OpenAIRE

Carvalho, Leandro M. de; Nascimento, Paulo C. do; Bohrer, Denise; Correia, Daniele; Bairros, André V. de; Pomblum, Valdeci J.; Pomblum, Solange G.

2007-01-01

This paper describes a systematic study of the voltammetric behavior of amfepramone at the hanging mercury drop electrode (HMDE) by cyclic (CV) and alternating current (AC) voltammetric methods. The studies showed the adsorptive behavior of amfepramone at the HMDE and were performed in H2SO4 0.1 mol L-1 (pH 1.0) and Ringer buffer (pH 11.0) as supporting electrolytes. The linear range for the amfepramone determination by differential pulse voltammetry (DPV) was 0.05 to 2.0 mg L-1 (r = 0.998) i...

Caracterización de la comunidad vegetal en una asociación de gramíneas mejoradas y Leucaena leucocephala cv.: Cunningham Characterization of the plant community in an association of improved grasses and Leucaena leucocephala cv.: Cunningham

Directory of Open Access Journals (Sweden)

Tania Sánchez

2007-11-01

Full Text Available En una vaquería de la Empresa Genética de Matanzas se realizó un estudio durante cinco años, con el objetivo de caracterizar el comportamiento de la comunidad vegetal en una asociación de gramíneas mejoradas y Leucaena leucocephala cv. Cunningham en condiciones comerciales. Se determinó la composición botánica del pastizal, la densidad de arbóreas, la disponibilidad de materia seca y los contenidos de MS, PB, Ca y P de las especies presentes en el sistema. La composición botánica del pastizal se caracterizó por un porcentaje de pastos mejorados superior al 50%, con predominio de Cynodon nlemfuensis cv. Jamaicano y Panicum maximum cv. Likoni; mientras que la leucaena mantuvo la densidad de plantas, como una adaptación a las condiciones del sistema. La disponibilidad de materia seca total fue superior a las 3 t/ha/rotación durante la etapa experimental. Se concluye que en la asociación de gramíneas mejoradas y L. leucocephala cv. Cunningham se presentó una alta disponibilidad de materia seca y persistencia del pastizal durante los cinco años del estudio, con valores de PB en las gramíneas mejoradas de 9,6-9,8% y en la leucaena de 25%, sin la aplicación de riego ni fertilizantes químicos, lo cual permitió atenuar las diferencias entre los períodos lluvioso y poco lluvioso.In a dairy of the Genetic Enterprise of Matanzas, a work was carried out for five years, with the objective of characterizing the performance of the plant community in an association of improved grasses and Leucaena leucocephala cv Cunningham under commercial conditions. The botanical composition of the pastureland, tree density, dry matter availability and DM, CP, Ca and P contents of the species present in the system were determined. The botanical composition of the pastureland was characterized by a percentage of improved pastures higher than 50%, with predominance of Cynodon nlemfuensis cv. Jamaicano and Panicum maximum cv. Likoni; while leucaena

Surfactant free nickel sulphide nanoparticles for high capacitance supercapacitors

Science.gov (United States)

Nandhini, S.; Muralidharan, G.

2018-04-01

The surfactant free nickel sulphide nanoparticles were synthesized via facile hydrothermal method towards supercapacitor applications. The formation of crystalline spherical nanoparticles was confirmed through structural and morphological studies. Electrochemical behaviour of the electrode was analyzed using cyclic voltammetry (CV), galvanostatic charge-discharge studies (GCD) and electrochemical impedance spectroscopy (EIS). The CV studies imply that specific capacitance of the electrode arises from a combination of surface adsorption and Faradic reaction. The NiS electrode delivered a specific capacitance of about 529 F g-1 at a current density of 2 A g-1 (GCD measurements). A profitable charge transfer resistance of 0.5 Ω was obtained from EIS. The 100 % of capacity retention even after 2000 repeated charge-discharge cycles could be observed in 2 M KOH electrolyte at a much larger rate of 30 A g-1. The experimental results suggest that nickel sulphide is a potential candidate for supercapacitor applications.

Verbal cues effectively orient children's auditory attention in a CV-syllable dichotic listening paradigm.

Science.gov (United States)

Phélip, Marion; Donnot, Julien; Vauclair, Jacques

2015-12-18

In their groundbreaking work featuring verbal dichotic listening tasks, Mondor and Bryden showed that tone cues do not enhance children's attentional orienting, in contrast to adults. The magnitude of the children's right-ear advantage was not attenuated when their attention was directed to the left ear. Verbal cues did, however, appear to favour the orientation of attention at around 10 years, although stimulus-onset asynchronies (SOAs), which ranged between 450 and 750 ms, were not rigorously controlled. The aim of our study was therefore to investigate the role of both types of cues in a typical CV-syllable dichotic listening task administered to 8- to 10-year-olds, applying a protocol as similar as possible to that used by Mondor and Bryden, but controlling for SOA as well as for cued ear. Results confirmed that verbal cues are more effective than tone cues in orienting children's attention. However, in contrast to adults, no effect of SOA was observed. We discuss the relative difficulty young children have processing CV syllables, as well as the role of top-down processes in attentional orienting abilities.

Business Strategy of CV Jaya Sampurna in Facing Soft Drink Distributor Competition in Bekasi

Directory of Open Access Journals (Sweden)

Seri Nurmala

2015-11-01

Full Text Available CV Jaya Sampurna is a soft drink distributor in Bekasi. Distributor company has a low profit margin, moreover the product sold is Fast Moving Consumers Goods with a very low profit margin (3.5%–5%. Therefore the company depends on a high volume of sales. Besides, there are many competitors in this industry, thus the business strategy is needed to improve the competitive advantage of the company. Given the conditions,this research was to identify the internal and the external factors, to identify the formulation of business strategy alternative, and to identify the recommendation of functional strategy for CV Jaya Sampurna. Research used descriptive method; and the type of research used was case study. Data were gathered from questionnaires and interview to three member of managers: Director, Operational Manager, and Finance Manager. Data wereanalyzed by using EFE, IFE, SWOT, IE, Grand Strategy Matrix and QSPM. The result of this research implies that the alternative strategy based on QSPM’s result was market penetration

Exogenous gibberellins inhibit coffee (Coffea arabica cv. Rubi) seed germination and cause cell death in the embryo

NARCIS (Netherlands)

Silva, Da E.A.A.; Toorop, P.E.; Nijsse, J.; Bewley, J.D.; Hilhorst, H.W.M.

2005-01-01

The mechanism of inhibition of coffee (Coffea arabica cv. Rubi) seed germination by exogenous gibberellins (GAs) and the requirement of germination for endogenous GA were studied. Exogenous GA4+7 inhibited coffee seed germination. The response to GA4+7 showed two sensitivity thresholds: a lower one

Agrobacterium-mediated transformation of Easter lily (Lilium longiflorum cv. Nellie White)

Science.gov (United States)

Conditions were optimized for transient transformation of Lilium longiflorum cv. Nellie White using Agrobacterium tumefaciens. Bulb scale and basal meristem explants were inoculated with A. tumefaciens strain AGL1 containing the binary vector pCAMBIA 2301 which has the uidA gene that codes for ß-gl...

Characterization and electrochemical studies of Nafion/nano-TiO2 film modified electrodes

International Nuclear Information System (INIS)

Yuan Shuai; Hu Shengshui

2004-01-01

A nano-TiO 2 film from stable aqueous dispersion has been modified on a glassy carbon electrode (GCE), and was characterized by scanning electron microscopy (SEM) and surface-enhanced Raman spectroscopy (SERS). This nanostructured film exhibits an ability to improve the electron-transfer rate between electrode and dopamine (DA), and electrocatalyze the redox of DA. The electrocatalytical behavior of DA was examined by cyclic voltammetry (CV). Combined with Nafion, the bilayer-modified electrode (N/T/GCE) gives a sensitive voltammetric response of DA regardless of excess ascorbic acid (AA). Electrochemical impedance spectroscopy (EIS) at a fixed potential was performed at variously treated GCEs. The mechanism of the electrode reaction of DA at N/T/GCE and the equivalent circuits of different GCEs have been proposed

ANALISIS KEBUTUHAN TENAGA KERJA RESERVASI TERHADAP PERENCANAAN PENGEMBANGAN SUMBER DAYA MANUSIA PADA CV. CAN TOUR & TRAVEL

Directory of Open Access Journals (Sweden)

Maya Christina

2017-01-01

Full Text Available Employment remains the fundamental probel faced by many countries including Indonesia. One of the efforts the Government of Indonesia in extending employment opportunities is to develop the tourism sector. Bali is one of the potential tourist destinastions and it needs to be marketed. Cooperation between the Travel Bureau with the provider of the accommodation or hotel is one of the ways the potential market and the most instrumental in the development of the company, namely human resources required or called by labor. CV. CAN Tour and Travel is one of the tourist industry in Bali trip with a number of guest handling that quite a lot. This research aims to know the availability of labor needs resevartion in order CV. CAN Tour and Travel development and also to find out how the workforce qualification is required. Determination technique using the key informant that was labor reservation CV. CAN Tour and Travel, while the base of the informant was CV. CAN Tour and Travel Manager. Data analysis technique used is the analysis of workload and workforce needs analysis. The research results obtained indicate that shortage of time working as many as 210 minutes. So the manpower needed by CV. CAN Tour and Travel is two people with the fact that there is only 1 nowaday. It can be seen from the burden of the work done in a day’s work and the workforce absences. So labor needs on the Reservation Department is supposed to be 3 people, with 2 staff 1 reservations and ticketing staff. It was necessary increase manpower in the Labour Departmen’s Reservation in the reservation and also training to develop the ability to work.

Electrochemical characterization of Si in tetra-methyl ammonium hydroxide (TMAH) and TMAH:Triton-X-100 solutions under white light effects

Science.gov (United States)

Conway, Elizabeth M.; Cunnane, Vincent J.

2002-03-01

An experimental study of the electrochemical characteristics of the silicon/tetra-methyl ammonium hydroxide (TMAH) junction under dark and white light conditions are investigated for both n- and p-type Si. The presence of Triton-X-100 (TX100) in the TMAH solution under white light conditions is also studied. Cyclic voltammetry (CV) and ex situ atomic force microscopy (AFM) are employed to study the white light effects on the etching characteristics of silicon in TMAH and TMAH:TX100. It was found that the passivation peak potential shifted significantly for both n- and p-type Si under white light conditions. The positions of the flatband potential for n- and p-type Si were predicted by CV under illumination. Finally, etch rate studies and preliminary surface roughness measurements were performed on p(100) Si in TMAH under both dark and white light conditions. These latter studies concluded that a reduction in the vertical surface roughness occurred in the presence of white light.

An integrated control and readout circuit for implantable multi-target electrochemical biosensing.

Science.gov (United States)

Ghoreishizadeh, Sara S; Baj-Rossi, Camilla; Cavallini, Andrea; Carrara, Sandro; De Micheli, Giovanni

2014-12-01

We describe an integrated biosensor capable of sensing multiple molecular targets using both cyclic voltammetry (CV) and chronoamperometry (CA). In particular, we present our custom IC to realize voltage control and current readout of the biosensors. A mixed-signal circuit block generates sub-Hertz triangular waveform for the biosensors by means of a direct-digital-synthesizer to control CV. A current to pulse-width converter is realized to output the data for CA measurement. The IC is fabricated in 0.18 μm technology. It consumes 220 μW from 1.8 V supply voltage, making it suitable for remotely-powered applications. Electrical measurements show excellent linearity in sub- μA current range. Electrochemical measurements including CA measurements of glucose and lactate and CV measurements of the anti-cancer drug Etoposide have been acquired with the fabricated IC and compared with a commercial equipment. The results obtained with the fabricated IC are in good agreement with those of the commercial equipment for both CV and CA measurements.

Modification of Poly- and Oligosaccharides with Os(VI) pyridine. Voltammetry of the Os(VI) Adducts Obtained by Ligand Exchange

Czech Academy of Sciences Publication Activity Database

Trefulka, Mojmír; Paleček, Emil

2013-01-01

Roč. 25, č. 8 (2013), s. 1813-1817 ISSN 1040-0397 R&D Projects: GA ČR(CZ) GAP301/11/2055 Institutional research plan: CEZ:AV0Z50040702 Institutional support: RVO:68081707 Keywords : OS(VI)-MODIFIED POLYSACCHARIDES * STRIPPING VOLTAMMETRY * TRANS-ESTERIFICATION Subject RIV: BO - Biophysics Impact factor: 2.502, year: 2013

Life assessment of PVD based hard coatings by linear sweep voltammetry for high performance industrial application

International Nuclear Information System (INIS)

Malik, M.; Alam, S.; Irfan, M.; Hassan, Z.

2006-01-01

PVD based hard coatings have remarkable achievements in order to improve Tribological and surface properties of coating tools and dies. As PVD based hard coatings have a wide range of industrial applications especially in aerospace and automobile parts where they met different chemical attacks and in order to improve industrial performance these coatings must provide an excellent resistance against corrosion, high temperature oxidation and chemical reaction. This paper focuses on study of behaviour of PVD based hard coatings under different corrosive environments like as H/sub 2/SO/sub 4/, HCl, NaCl, KCl, NaOH etc. Corrosion rate was calculate under linear sweep voltammetry method where the Tafel extrapolation curves used for continuously monitoring the corrosion rate. The results show that these coatings have an excellent resistance against chemical attack. (author)

Effects of series and parallel resistances on the C-V characteristics of silicon-based metal oxide semiconductor (MOS) devices

Science.gov (United States)

Omar, Rejaiba; Mohamed, Ben Amar; Adel, Matoussi

2015-04-01

This paper investigates the electrical behavior of the Al/SiO2/Si MOS structure. We have used the complex admittance method to develop an analytical model of total capacitance applied to our proposed equivalent circuit. The charge density, surface potential, semiconductor capacitance, flatband and threshold voltages have been determined by resolving the Poisson transport equations. This modeling is used to predict in particular the effects of frequency, parallel and series resistance on the capacitance-voltage characteristic. Results show that the variation of both frequency and parallel resistance causes strong dispersion of the C-V curves in the inversion regime. It also reveals that the series resistance influences the shape of C-V curves essentially in accumulation and inversion modes. A significant decrease of the accumulation capacitance is observed when R s increases in the range 200-50000 Ω. The degradation of the C-V magnitude is found to be more pronounced when the series resistance depends on the substrate doping density. When R s varies in the range 100 Ω-50 kΩ, it shows a decrease in the flatband voltage from -1.40 to -1.26 V and an increase in the threshold voltage negatively from -0.28 to -0.74 V, respectively. Good agreement has been observed between simulated and measured C-V curves obtained at high frequency. This study is necessary to control the adverse effects that disrupt the operation of the MOS structure in different regimes and optimizes the efficiency of such electronic device before manufacturing.

Diagnosis of Elevator Faults with LS-SVM Based on Optimization by K-CV

Directory of Open Access Journals (Sweden)

Zhou Wan

2015-01-01

Full Text Available Several common elevator malfunctions were diagnosed with a least square support vector machine (LS-SVM. After acquiring vibration signals of various elevator functions, their energy characteristics and time domain indicators were extracted by theoretically analyzing the optimal wavelet packet, in order to construct a feature vector of malfunctions for identifying causes of the malfunctions as input of LS-SVM. Meanwhile, parameters about LS-SVM were optimized by K-fold cross validation (K-CV. After diagnosing deviated elevator guide rail, deviated shape of guide shoe, abnormal running of tractor, erroneous rope groove of traction sheave, deviated guide wheel, and tension of wire rope, the results suggested that the LS-SVM based on K-CV optimization was one of effective methods for diagnosing elevator malfunctions.

Effect of inoculation and nitrogen top-dressing on yields and fodder value of winter pea cv. Maksimirski ozimi in wheat cv. Sana mixture

Directory of Open Access Journals (Sweden)

Darko Uher

2007-06-01

Full Text Available Two year field trials (1999 - 2001 were performed to determine theinoculation seed winter pea and nitrogen top-dressing effect on number and active nodules of pea root and also on the green mass and dry matter yield of winter pea cv. Maksimirski ozimi and wheat cv. Sana mixture. Immediately before sowing the inoculation of pea seeds was accomplished by the indigenous variety of Rhizobium leguminosarum bv. viciae which belongs to the collection of Department of Microbiology at the Faculty of Agriculture University of Zagreb. The highest total nodule number on pea root (159 was determined on the inoculated variant as well as active nodule 144. Average mixture green mass yield were ranging from 24,65 t ha-1 (control up to 35,50 t ha-1 (inoculation. Total dry matter yields were ranging from 3,93 t ha-1 (control up to 5,66 t ha-1 (inoculation. Yields crude proteins pea in 2001 were ranging from 692 kg ha-1 (control up to 1058 kg ha-1 (inoculation and for wheat, those values ranged from 199 kg ha-1 (control up to 454 kg ha-1 (nitrogen top-dressing. Total crude proteins mixture yields were in range from 891 kg ha-1 (control up to 1360 kg ha-1 (inoculation.

Dynamics of Pseudomonas aeruginosa azurin and its Cys3Ser mutant at single crystal gold surfaces investigated by cyclic voltammetry and atomic force microscopy

DEFF Research Database (Denmark)

Friis, Esben P.; Andersen, Jens Enevold Thaulov; Madsen, Lars Lithen

1997-01-01

Cyclic voltammetry of Pseudomonas aeruginosa azurin on polycrystalline gold is reversible (E0=360mV vs she;50mM ammonium acetate) but the voltammetric signals decay with time constants of about 3x10-3 s-1. No signal is observed for monocrystalline Au(111). Cys3Ser azurin is electrochemically inac...... into the solution, recovering the free Au(111) surface. The cyclic voltammetry and AFM data are consistent with time dependent adsorption of the azurins on gold via the disulphide bridge (wild-type) or free thiol group (Cys3Ser mutant).......Cyclic voltammetry of Pseudomonas aeruginosa azurin on polycrystalline gold is reversible (E0=360mV vs she;50mM ammonium acetate) but the voltammetric signals decay with time constants of about 3x10-3 s-1. No signal is observed for monocrystalline Au(111). Cys3Ser azurin is electrochemically...... inactive on either type of gold electrode but shows a reversible although decaying peak (362mV, 50mM ammonium acetate; decay time constant ~ 2x10-3 s-1) on edge-plane pyrolytic graphite.Ex situ and in situ atomic force microscopy (AFM) of the azurins on Au(111) show initially arrays of protein structures...

A study of the electrochemical behaviour of electrodes in operating solid-state supercapacitors

International Nuclear Information System (INIS)

Staiti, P.; Lufrano, F.

2007-01-01

The electrochemical behaviour of electrodes and of complete solid-state supercapacitors has been studied by cyclic voltammetry (CV) and galvanostatic charge/discharge (CD) measurements using two independent electrochemical equipments. The first one controlled the execution of the test and recorded the voltage and current values of the complete supercapacitor while the other one recorded the potential changes of the single electrodes. In this work, two different types of capacitors were studied: (a) a symmetric supercapacitor using carbon electrodes, and (b) a hybrid (asymmetric) supercapacitor with ruthenium oxide/carbon in the positive electrode and carbon in the negative electrode. The studies evidenced that in the symmetric capacitors the positive electrode controlled the capacitive performance and an optimal mass ratio from 1.2:1 to 1.3:1 between the positive and the negative electrodes was found in the investigated conditions. For the hybrid supercapacitor it was observed that the ruthenium-based positive electrode influenced the capacitive performance of carbon-based negative electrode and that an accurate balance of carbon loading in the negative electrode was necessary

Anodic stripping voltammetry with carbon paste electrodes for rapid Ag(I) and Cu(II) determinations.

Science.gov (United States)

Labar, C; Lamberts, L

1997-05-01

The simultaneous determination of silver(I) and copper(II) is realized for the routine analysis of trace levels of these elements by anodic stripping voltammetry (ASV) at the carbon paste electrode (CPE). The electrochemical response is studied in 14 different supporting electrolytes, ranging from acidic solutions (pH 0.1) to neutral and basic (pH 9.7) media, and the parameters governing electrodeposition and stripping steps are characterized for each medium by the use of pseudo-voltammograms. Comparison between different modes of matter transport mechanisms is also given. The dynamic range of the method is 0.05 to 150 mug 1(-1) Ag(I) in the majority of the media studied and can be extended to 400 mug l(-1) in selected media, with a general reproducibility in the +/- 2% range for five replicate measurements. The total analysis time lies between approximately 30 s and 10 min. Activation of the CPE surface has been studied, but this pretreatment is demonstrated to be unfavourable and is replaced by a simpler unique 'cleaning' procedure of dipping the CPE in diluted nitric acid.

Electrochemistry and analytical determination of lysergic acid diethylamide (LSD) via adsorptive stripping voltammetry.

Science.gov (United States)

Merli, Daniele; Zamboni, Daniele; Protti, Stefano; Pesavento, Maria; Profumo, Antonella

2014-12-01

Lysergic acid diethylamide (LSD) is hardly detectable and quantifiable in biological samples because of its low active dose. Although several analytical tests are available, routine analysis of this drug is rarely performed. In this article, we report a simple and accurate method for the determination of LSD, based on adsorptive stripping voltammetry in DMF/tetrabutylammonium perchlorate, with a linear range of 1-90 ng L(-1) for deposition times of 50s. LOD of 1.4 ng L(-1) and LOQ of 4.3 ng L(-1) were found. The method can be also applied to biological samples after a simple extraction with 1-chlorobutane. Copyright © 2014 Elsevier B.V. All rights reserved.

Electrochemistry of deferiprone as an orally active iron chelator and HIV-1 replication inhibitor and its determination

OpenAIRE

Yadegari, H.; Jabbari, A.; Heli, H.; Moosavi-Movahedi, A. A.; Majdi, S.

2008-01-01

The electrochemical behavior of the anti-thalassemia and anti-HIV replication drug, deferiprone, was investigated by cyclic voltammetry (CV) at a platinum electrode. In an acetate buffer solution, pH = 4.0, two irreversible anodic peaks for deferiprone, with E(0)1 = 875 mV and E(0)2 = 1235 mV (vs. Ag/AgCl) appeared at a potential sweep rate of 50 mV s-1. Cyclic voltammetric study indicated that the oxidation process is irreversible and diffusion-controlled. The diffusion and the electron tran...

Comparison of tracking algorithms implemented in OpenCV

Directory of Open Access Journals (Sweden)

Janku Peter

2016-01-01

Full Text Available Computer vision is very progressive and modern part of computer science. From scientific point of view, theoretical aspects of computer vision algorithms prevail in many papers and publications. The underlying theory is really important, but on the other hand, the final implementation of an algorithm significantly affects its performance and robustness. For this reason, this paper tries to compare real implementation of tracking algorithms (one part of computer vision problem, which can be found in the very popular library OpenCV. Moreover, the possibilities of optimizations are discussed.

Cyclic voltammetry of Monel 400 in lithium hydroxide solution at elevated temperatures

International Nuclear Information System (INIS)

MacDonald, D.D.

1976-01-01

The electrochemistry of Monel 400 in 1 mole/kg -1 LiOH solution at 25, 125 and 250 0 C has been investigated using the technique of cyclic voltammetry. The general electrochemical behaviour is found to most closely approximate to that of the major component, nickel, although expansion of the current scale reveals anodic and cathodic peaks which probably arise from redox processes involving copper. The general similarity to nickel can be rationalized in terms of either the d electron theory for cupronickel alloys or phase separation, the latter being favoured in the present study. At 25 0 C the majority of charge consumed on sweeping the potential in the positive direction is involved in the formation of an oxide film at potentials close to oxygen evolution. This process is no longer observed at 2500C, due to a sharp reduction in the oxygen evolution overpotential with temperature. The majority of charge consumed on cyclic sweeping at this temperature is attributed to active dissolution of the nickel component of the alloy to form HNiO 2 - (or Ni(OH) 3 - ) at potentials slightly positive to the hydrogen evolution region. (author)

Simultaneous determination of three herbicides by differential pulse voltammetry and chemometrics.

Science.gov (United States)

Ni, Yongnian; Wang, Lin; Kokot, Serge

2011-01-01

A novel differential pulse voltammetry method (DPV) was researched and developed for the simultaneous determination of Pendimethalin, Dinoseb and sodium 5-nitroguaiacolate (5NG) with the aid of chemometrics. The voltammograms of these three compounds overlapped significantly, and to facilitate the simultaneous determination of the three analytes, chemometrics methods were applied. These included classical least squares (CLS), principal component regression (PCR), partial least squares (PLS) and radial basis function-artificial neural networks (RBF-ANN). A separately prepared verification data set was used to confirm the calibrations, which were built from the original and first derivative data matrices of the voltammograms. On the basis relative prediction errors and recoveries of the analytes, the RBF-ANN and the DPLS (D - first derivative spectra) models performed best and are particularly recommended for application. The DPLS calibration model was applied satisfactorily for the prediction of the three analytes from market vegetables and lake water samples.

Mango (Mangifera indica L.) cv. Kent fruit mesocarp de novo transcriptome assembly identifies gene families important for ripening

Science.gov (United States)

Fruit ripening is a physiological and biochemical process genetically programmed to regulate fruit quality parameters like firmness, flavor, odor and color, as well as production of ethylene in climacteric fruit. In this study, a transcriptomic analysis of mango (Mangifera indica L.) mesocarp cv. "K...

Electrochemical Performances of Diamond Like Carbon Films for Pb(II) Detection in Tap Water Using Differential Pulse Anodic Stripping Voltammetry Technique

Czech Academy of Sciences Publication Activity Database

Sbartai, A.; Namour, F.; Barbier, F.; Krejčí, J.; Kučerová, R.; Krejčí, T.; Neděla, Vilém; Sobota, Jaroslav; Jaffrezic-Renault, N.

2013-01-01

Roč. 11, č. 8 (2013), s. 1524-1529 ISSN 1546-198X Institutional support: RVO:68081731 Keywords : Diamond Like Carbon DLC * Lead Detection * Differential Pulse Anodic Stripping * Voltammetry * Tap Water Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.558, year: 2013

Evaluation of colloidal Pd and Pd-alloys as anode electrocatalysts for direct borohydride fuel cells applications

Energy Technology Data Exchange (ETDEWEB)

Atwan, M.H. [General Motors R and D Technical Center, Warren, MI (United States); Gyenge, E.L. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Chemical and Biological Engineering; Northwood, D.O. [Windsor Univ., ON (Canada). Dept. of Mechanical, Automotive and Materials Engineering

2010-07-01

An evaluation was conducted to assess the use of colloidal palladium (Pd) and Pd alloys as anode electrocatalysts for direct borohydride fuel cell applications. A modified Bonneman method was used to investigate borohydride oxidation on supported Pd and Pd-alloy nano-electrocatalysts. Cyclic voltammetry (CV), rotating disk electrode (RDE) voltammetry, and single fuel cell test stations were used to determine Tafel slopes, exchange current densities, oxidation peak potentials, and fuel cell performance. The study also investigated the influence of temperature and oxidant flow and fuel flow rates on fuel cell performance. The study showed that the current density of the fuel cell increased with increases in temperature for all the investigated Pd electrocatalysts. However, the increase in current density was not as high as expected when fuel flow rates were increased. A current density of 50 mA cm{sup -2} was observed at 298 K with a Pd-Ir anode catalyst operating at a cell voltage of 0.5 V. 28 refs., 1 tab., 15 figs.

Heterogeneous compute in computer vision: OpenCL in OpenCV

Science.gov (United States)

Gasparakis, Harris

2014-02-01

We explore the relevance of Heterogeneous System Architecture (HSA) in Computer Vision, both as a long term vision, and as a near term emerging reality via the recently ratified OpenCL 2.0 Khronos standard. After a brief review of OpenCL 1.2 and 2.0, including HSA features such as Shared Virtual Memory (SVM) and platform atomics, we identify what genres of Computer Vision workloads stand to benefit by leveraging those features, and we suggest a new mental framework that replaces GPU compute with hybrid HSA APU compute. As a case in point, we discuss, in some detail, popular object recognition algorithms (part-based models), emphasizing the interplay and concurrent collaboration between the GPU and CPU. We conclude by describing how OpenCL has been incorporated in OpenCV, a popular open source computer vision library, emphasizing recent work on the Transparent API, to appear in OpenCV 3.0, which unifies the native CPU and OpenCL execution paths under a single API, allowing the same code to execute either on CPU or on a OpenCL enabled device, without even recompiling.

Perancangan Kemasan Transportasi Buah Jambu Air (Syzygium aqueum cv Camplong

Directory of Open Access Journals (Sweden)

Iswahyudi

2015-04-01

Full Text Available Jamboo cv Camplong was an exotic fruit from Sampang Indonesia which had high economic values. The quality of fresh Jamboo was greatly influenced by the types of packaging and ways of its transportation that affected its shelf life. The purpose of this research were designing a primary packaging and analyzing the quality of Jamboo cv Camplong after short transportation (from Sampang to Surabaya. Farmers used conventional packaging with capacity of 8.4 kg/box (dimension 478 mm x 146 mm x 354 mm. Based on theoretical packaging design showed that the flute BC cardboard (capacity 4.5 kg/box, dimension 357 mm x 217 mm x 216 mm with partition flute A cardboard. In fact, there was needed modification of the dimension (342 mm x 210 mm x 200 mm because of the fruits diameter (60-65 mm. This result did not change the efficiency usage of transportation space (91-95% and compression strength of box can support (7 boxes/ stack. The result showed that the mechanical damage after transportation were 20.87% for conventional packaging (as control and 7.70% for modification packaging design (packaging with partition.

Applications in Foreign Currency Prima CV Ellindo Money Changer

OpenAIRE

Wisnu Sutrisno; Ire Puspa Wardhani, Skom, MMSI

2004-01-01

This explains the scientific writing about the design of application programs forforeign currency transactions by using Visual Basic 6.0 programming language.In scientific writing database is also used by Visual Data Manager (VisData)integrated in Visual Basic 6.0 program itself. Consists of three tables namelyCurrency,Customer and Transaction.In the end application program for foreign currency transactions will be applied to theCV. Prima Ellindo Money Changer for ease in performing activitie...

In vitro multiplication of banana (Musa sp.) cv. Grand Naine | Ahmed ...

African Journals Online (AJOL)

A micropropagation method is described for banana (Musa Spp.) Cv. Grand Naine. Suckers were surface sterilized with HgCl2 (0.1%) for 6 min which gave minimum contamination with maximum culture establishment. Of various treatment combinations, Murashige and Skoog (MS) medium + BAP 4.00 mg/l with IAA 2.00 ...

Photovoltaic performance of multi-wall carbon nanotube/PEDOT:PSS composite on the counter electrode of a dye-sensitized solar cell

Science.gov (United States)

Rhee, Yonghoon; Ko, Minjae; Jin, Hwayoung; Jin, Joon-Hyung; Min, Nam Ki

2014-08-01

A composite of poly(3,4-ethylendioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and multi-walled carbon nanotubes (MWCNTs) was cyclovoltametrically electropolymerized on a fluorine-doped tin oxide (FTO) substrate and used as a counter electrode for a dye-sensitized solar cell. The PEDOT:PSS-MWCNT composite film was investigated using scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The CV diagrams showed that the PEDOT:PSS-MWCNT composite film has better electro-catalytic activity for the I-/I3- redox reaction than the conventional platinized FTO. The best energy conversion efficiency was observed in EIS data with an MWCNT content of 0.002 wt %.

123 I production using CV-28 cyclotron from IPEN-CNEN/SP

International Nuclear Information System (INIS)

Mestnik, S.A.C.; Mengatti, J.; Nieto, W.; Yanagawa, S.I.; Sumiya, L.C.A.; Silva, C.P.G.; Osso Junior, J.A.

1992-01-01

The main conditions for iodine 123 production by 124 Te (p,2 n) 123 I reaction were presented, using the cyclotron CV-28 at IPEN-CNEN/SP, with protons of E max = 24 MeV. Two types of targets (Te O 2 and Te O 2 + 2% Al 2 O 3 ) and the influence of Al 2 O 3 in iodine release were studied. After the selection, the 124 Te O 2 (96,2%) target, was melted in platinum support and irradiated with proton current until 12 mu A. The separation of 123 I was made by dry distillation, using induction furnace and O 2 atmosphere. (C.G.C.)

Strategi Persaingan Bisnis Jasa Konstruksi Kapal (Studi kasus tentang penerapan strategi bisnis pada perusahaan konstruksi kapal CV. Marine Construction Belawan)

OpenAIRE

Meliala, Fifi Febriana

2015-01-01

Vessel construction services business is a service business that is promising if the business location support. Business services ship construction is still dominated in the area such as Belawan sea. In conducting its business activities or business often followed by intense competition from competitors. Competition is also experienced by CV. Marine Construction Belawan business that competes with similar services, namely, ship construction services. The company has applied for a competitive ...

Electroanalytical measurements of binary-analyte mixtures in molten LiCl-KCl eutectic: Uranium(III)- and Magnesium(II)-Chloride

Energy Technology Data Exchange (ETDEWEB)

Rappleye, Devin, E-mail: rappleye1@llnl.gov; Newton, Matthew L.; Zhang, Chao; Simpson, Michael F.

2017-04-01

The electrochemical behavior of MgCl{sub 2} in molten LiCl-KCl eutectic was investigated to evaluate its suitability as a surrogate for PuCl{sub 3} in studies related to the eletrorefining of used nuclear fuel. The reduction of Mg{sup 2+} was found to be electrochemically reversible up to 300 mV s{sup −1} at 773 K. The diffusion coefficient for Mg{sup 2+} was calculated to be 1.74 and 2.17 × 10{sup −5} cm{sup 2} s{sup −1} with and without U{sup 3+} present, respectively, at 773 K using cyclic voltammetry (CV). Upon comparison to literature data, the diffusion coefficient of Mg{sup 2+} differs by only 8.8% (with U{sup 3+} present) from that of Pu{sup 3+} and the difference in peak potentials was only 79 mV. Binary-analyte mixtures of UCl{sub 3} and MgCl{sub 2} in eutectic LiCl-KCl were further investigated using CV, normal pulse voltammetry (NPV), chronoamperometry (CA) and open-circuit potential (OCP) measurements for the purpose of comparing each technique's accuracy in measuring U{sup 3+} and Mg{sup 2+} concentrations. Of all the techniques tested, NPV resulted in the lowest error which was, on average, 11.4% and 9.81% for U{sup 3+} and Mg{sup 2+}, respectively.

Kinetics of degradation of ascorbic acid by cyclic voltammetry method

Directory of Open Access Journals (Sweden)

Grudić Veselinka V.

2015-01-01

Full Text Available Cyclic voltammetry was used to examine the kinetics of degradation of ascorbic acid (AA at different temperatures. It has been shown that the reduction of the concentration of AA in all temperatures follow the kinetics of the first order reaction. The rate constant of the oxidation reaction increases with temperature as follows: 5x10-5; 2x10-4; 1x10-3 and 3x10-3 min-1 at temperatures of 25°C, 35°C, 65°C and 90°C, respectively. The temperature dependence of the rate constant follows Arrhenius equation, and the value of activation energy of the reaction degradation is 48.2 kJ mol-1 . The effect of storage time at a temperature of 90 °C on AA content in fresh juice of green peppers was investigated. It was shown that AA oxidation reaction in the juice is also the first order reaction, while the lower rate constant in relation to the pure AA (5x10-3 min-1 indicates the influence of other substances present in peppers.

Immunogenicity and Safety of 10-valent Pneumococcal Nontypeable Haemophilus influenzae Protein D Conjugate Vaccine (PHiD-CV) Administered to Children With Sickle Cell Disease Between 8 Weeks and 2 Years of Age: A Phase III, Open, Controlled Study.

Science.gov (United States)

Sirima, Sodiomon B; Tiono, Alfred; Gansané, Zakaria; Siribié, Mohamadou; Zongo, Angèle; Ouédraogo, Alphonse; François, Nancy; Strezova, Ana; Dobbelaere, Kurt; Borys, Dorota

2017-05-01

Immunogenicity, safety and reactogenicity of the 10-valent pneumococcal nontypeable Haemophilus influenzae protein D conjugate vaccine (PHiD-CV) were evaluated in children with sickle cell disease (SCD), who are at increased risk for infections. In this phase III, open-label, single-center, controlled study in Burkina Faso (NCT01175083), children with SCD (S) or without SCD (NS) were assigned to 6 groups (N = 300): children 8-11 weeks of age (vaccines; children 7-11 months of age (7-11S and 7-11NS groups) received 2 primary doses and a booster dose of PHiD-CV; children 12-23 months of age (12-23S and 12-23NS groups) received 2 catch-up doses of PHiD-CV. Pneumococcal antibody responses were measured using 22F-inhibition enzyme-linked immunosorbent assay and functional opsonophagocytic activity. Responses to other antigens were measured by enzyme-linked immunosorbent assay. Adverse events were recorded. One month postprimary vaccination, for each vaccine serotype ≥98% of infants in the vaccination in children vaccination. Safety and reactogenicity profiles were similar in children with or without SCD. PHiD-CV was immunogenic with an acceptable safety profile in children with and without SCD starting vaccination at 8 weeks to 23 months of age.

In Vivo and in Vitro Micrografting of Pistachio, Pistacia vera L. cv. "Siirt"

OpenAIRE

ONAY, Ahmet; PİRİNÇ, Vedat; ADIYAMAN, Filiz; IŞIKALAN, Çiğdem; TİLKAT, Engin; BAŞARAN, Davut

2014-01-01

In this study, the success of in vivo and in vitro micrografts of pistachio (Pistacia vera L. cv. "Siirt") materials are presented. The only variable tested was age (1, 5, 10, and 30-year-old trees). Ten- to 12-day-old axenic seedlings germinated in vitro or seedlings (3 to 5 months-old) grown in pots in vivo were used as rootstocks. Shoot tips collected from the four age classes of mature trees of pistachio were the source of scions. Firm contact between the scion and roots...

Electrochemical deposition of magnesium from analogous ionic liquid based on dimethylformamide

International Nuclear Information System (INIS)

Wang, Huaiyou; Jia, Yongzhong; Wang, Xiaohua; Yao, Ying; Yue, Duyuan; Jing, Yan

2013-01-01

In this paper, a homogeneous, colorless analogous ionic liquid containing dimethylformamide (DMF) and magnesium chloride hexahydrate is synthesized. The conductivity of analogous ionic liquid is measured as a function of temperature and composition. Irreversible electrochemical behavior was generally observed by cyclic voltammetry (CV) in the analogous ionic liquid based electrolytes containing simple Mg salt. CV also shows that the reducing reaction of Mg 2+ is a diffusion control process. Electrochemical impedance spectroscopy (EIS) of analogous ionic liquid was measured at 20 °C, 40 °C and 60 °C. Electrodeposition of magnesium metal from analogous ionic liquid has been studied. The Mg deposits are also systematically characterized by the techniques of powder X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS). Results showed that magnesium was found in the deposited film

Effect of hydroxyl group position at imine structure on corrosion inhibition of mild steel in 0.5 m NaCl

Science.gov (United States)

Mohd, Yusairie; Dzolin, Syaidah Athirah; Bahron, Hadariah; Halim, Nurul Huda Abdul

2017-12-01

Corrosion is inherent for mild steel and it can be retarded through many approaches including electrodeposition of inert inhibitors in the form of organic molecules. Salicylideneaniline (L1) and 4-hydroxybenzalaniline (L2) were electrodeposited on mild steel using cyclic voltammetry (CV) using 0.1 M inhibitor concentration in 0.3 M NaOH. The scanning potential range for coating via CV was set from 0 - 2 V and back to 0 V for five cycles. A yellow film was observed covering the surface of the mild steel. The corrosion behavior of coated and uncoated mild steel was studied using Linear Polarization Resistance (LPR) in 0.5 M NaCl. Both coated mild steel specimens showed better corrosion resistance than the uncoated, with L1 providing a better inhibition protection with the inhibition efficiency of 80.51 %.

Fabrication of La-doped TiO2 Film Electrode and investigation of its electrocatalytic activity for furfural reduction

International Nuclear Information System (INIS)

Wang, Fengwu; Xu, Mai; Wei, Lin; Wei, Yijun; Hu, Yunhu; Fang, Wenyan; Zhu, Chuan Gao

2015-01-01

Lanthanum trivalent ions (La 3+ ) doped nano-TiO 2 film electrode was prepared by the sol–gel method. The prepared electrode was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The electrocatalytic properties of the roughened TiO 2 film electrode towards the electrocatalytic reduction of furfural to furfural alcohol were evaluated by CV and preparative electrolysis experiments. The results of the optimum molar ratio of La: Ti was 0.005:1. Experimental evidence was presented that the La nano-TiO 2 electrode exhibited higher electrocatalytic activity for the reduction of furfural than the undoped nano-TiO 2 electrode in N,N-dimethylformamide medium. Bulk electrolysis studies were also carried out for the reduction of furfural and the product was confirmed by NMR

Electrochemical Sensor for Determination of Parathion Based on Electropolymerization Poly(Safranine Film Electrode

Directory of Open Access Journals (Sweden)

Xingyuan Liu

2011-01-01

Full Text Available Parathion has been determined with voltammetric technique based on a novel sensor fabricated by electropolymerization of safranine on a glassy carbon electrode (GCE. The electrochemical behavior of poly(safranine film electrode and its electrocatalytic activity toward parathion were studied in detail by cyclic voltammetry (CV and linear sweep voltammetry (LSV. All experimental parameters were optimized, and LSV was proposed for its determination. In optimal working conditions, the reduction current of parathion at this poly(safranine-modified electrode exhibited a good linear relationship with parathion concentration in the range of 3.43×10−8 to 3.43×10−5 mol L−1. The detection limit was 1.0×10−8 mol L−1. The high sensitivity and selectivity of the sensor were demonstrated by its practical application for the determination of trace amounts of parathion in fruit samples.

Hydrothermal synthesis of β-Ni(OH)2 and its supercapacitor properties

Science.gov (United States)

Waghmare, Suraj S.; Patil, Prashant B.; Baruva, Shiva K.; Rajput, Madhuri S.; Deokate, Ramesh J.; Mujawar, Sarfraj H.

2018-04-01

In present manuscript, we synthesized the Nickel hydroxide as an electrode material or supercapacitor application, using hydrothermal method with nickel nitrate as nickel source and hexamethylenetetramine as a directing agent. The reaction was carried out at 160°C temperature for 18 hrs. The structural, morphological and electrochemical characterizations were studied by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Cyclic Voltammetry (CV) and Galvanostatic Charge Discharge (GCD) respectively. Phase purity and crystalline nature of as prepared nickel hydroxide β-Ni(OH)2 was reveled from X-ray study. Using Debye Scherer's formula crystallite size of ˜15 nm was estimated for Nickel hydroxide. SEM reveals β-platelets like morphology of Ni(OH)2 average of platelets length of the order of 1 µm. Electrochemical studies (CV and GCD) were carried out in 2M KOH electrolyte solution. The maximum capacitance of 225 Fg-1 was observed for scan rate 5 mV within the potential window of 0.1 to 0.4 V.

Effect of mechanical damage and wound healing on the viscoelastic properties of stems of flax cultivars (Linum usitatissimum L. cv. Eden and cv. Drakkar).

Science.gov (United States)

Paul-Victor, Cloé; Dalle Vacche, Sara; Sordo, Federica; Fink, Siegfried; Speck, Thomas; Michaud, Véronique; Speck, Olga

2017-01-01

As plant fibres are increasingly used in technical textiles and their composites, underlying principles of wound healing in living plant fibres are relevant to product quality, and provide inspiration for biomimetic healing in synthetic materials. In this work, two Linum usitatissimum cultivars differing in their stem mechanical properties, cv. Eden (stems resistant to lodging) and cv. Drakkar (with more flexible stems), were grown without wound or with stems previously wounded with a cut parallel or transversal to the stem. To investigate wound healing efficiency, growth traits, stem biomechanics with Dynamic Mechanical Analysis and anatomy were analysed after 25-day recovery. Longitudinal incisions formed open wounds while transversal incisions generated stem growth restoring the whole cross-section but not the original stem organisation. In the case of transversal wound healing, all the bast fibre bundles in the perturbed area became lignified and pulled apart by parenchyma cells growth. Both Linum cultivars showed a healing efficiency from 79% to 95% with higher scores for transversal healing. Morphological and anatomical modifications of Linum were related to mechanical properties and healing ability. Alongside with an increased understanding of wound healing in plants, our results highlight their possible impact on textile quality and fibre yield.

Lipophilicity of acetylcholine and related ions examined by ion transfer voltammetry at a polarized room-temperature ionic liquid membrane

Czech Academy of Sciences Publication Activity Database

Langmaier, Jan; Záliš, Stanislav; Samec, Zdeněk

2018-01-01

Roč. 815, APR 2018 (2018), s. 183-188 ISSN 1572-6657 R&D Projects: GA ČR(CZ) GA15-03139S; GA ČR(CZ) GA17-05387S Institutional support: RVO:61388955 Keywords : acetylcholine * choline * ion transfer voltammetry Subject RIV: CG - Electrochemistry OBOR OECD: Electrochemistry (dry cells, batteries, fuel cells, corrosion metals, electrolysis) Impact factor: 3.012, year: 2016

Psychophysical scaling of circular vection (CV) produced by optokinetic (OKN) motion: individual differences and effects of practice.

Science.gov (United States)

Kennedy, R S; Hettinger, L J; Harm, D L; Ordy, J M; Dunlap, W P

1996-01-01

Vection (V) refers to the compelling visual illusion of self-motion experienced by stationary individuals when viewing moving visual surrounds. The phenomenon is of theoretical interest because of its relevance for understanding the neural basis of ordinary self-motion perception, and of practical importance because it is the experience that makes simulation, virtual reality displays, and entertainment devices more vicarious. This experiment was performed to address whether an optokinetically induced vection illusion exhibits monotonic and stable psychometric properties and whether individuals differ reliably in these (V) perceptions. Subjects were exposed to varying velocities of the circular vection (CV) display in an optokinetic (OKN) drum 2 meters in diameter in 5 one-hour daily sessions extending over a 1 week period. For grouped data, psychophysical scalings of velocity estimates showed that exponents in a Stevens' type power function were essentially linear (slope = 0.95) and largely stable over sessions. Latencies were slightly longer for the slowest and fastest induction stimuli, and the trend over sessions for average latency was longer as a function of practice implying time course adaptation effects. Test-retest reliabilities for individual slope and intercept measures were moderately strong (r = 0.45) and showed no evidence of superdiagonal form. This implies stability of the individual circularvection (CV) sensitivities. Because the individual CV scores were stable, reliabilities were improved by averaging 4 sessions in order to provide a stronger retest reliability (r = 0.80). Individual latency responses were highly reliable (r = 0.80). Mean CV latency and motion sickness symptoms were greater in males than in females. These individual differences in CV could be predictive of other outcomes, such as susceptibility to disorientation or motion sickness, and for CNS localization of visual-vestibular interactions in the experience of self-motion.

Palladium and palladium-tin supported on multi wall carbon nanotubes or carbon for alkaline direct ethanol fuel cell

Science.gov (United States)

Geraldes, Adriana Napoleão; Furtunato da Silva, Dionisio; Martins da Silva, Júlio César; Antonio de Sá, Osvaldo; Spinacé, Estevam Vitório; Neto, Almir Oliveira; Coelho dos Santos, Mauro

2015-02-01

Pd and PdSn (Pd:Sn atomic ratios of 90:10), supported on Multi Wall Carbon Nanotubes (MWCNT) or Carbon (C), are prepared by an electron beam irradiation reduction method. The obtained materials are characterized by X-Ray diffraction (XRD), Energy dispersive X-ray analysis (EDX), Transmission electron Microscopy (TEM) and Cyclic Voltammetry (CV). The activity for ethanol electro-oxidation is tested in alkaline medium, at room temperature, using Cyclic Voltammetry and Chronoamperometry (CA) and in a single alkaline direct ethanol fuel cell (ADEFC), in the temperature range of 60-90 °C. CV analysis finds that Pd/MWCNT and PdSn/MWCNT presents onset potentials changing to negative values and high current values, compared to Pd/C and PdSn/C electrocatalysts. ATR-FTIR analysis, performed during the CV, identifies acetate and acetaldehyde as principal products formed during the ethanol electro-oxidation, with low conversion to CO2. In single fuel cell tests, at 85 °C, using 2.0 mol L-1 ethanol in 2.0 mol L-1 KOH solutions, the electrocatalysts supported on MWCNT, also, show higher power densities, compared to the materials supported on carbon: PdSn/MWCNT, presents the best result (36 mW cm-2). The results show that the use of MWCNT, instead of carbon, as support, plus the addition of small amounts of Sn to Pd, improves the electrocatalytic activity for Ethanol Oxidation Reaction (EOR).

Electrochemical reduction of oxygen on gold and boron-doped diamond electrodes in ambient temperature, molten acetamide-urea-ammonium nitrate eutectic melt

International Nuclear Information System (INIS)

Dilimon, V.S.; Venkata Narayanan, N.S.; Sampath, S.

2010-01-01

The electrochemical reduction of oxygen has been studied on gold, boron-doped diamond (BDD) and glassy carbon (GC) electrodes in a ternary eutectic mixture of acetamide (CH 3 CONH 2 ), urea (NH 2 CONH 2 ) and ammonium nitrate (NH 4 NO 3 ). Cyclic voltammetry (CV), differential pulse voltammetry (DPV), chronoamperometry and rotating disk electrode (RDE) voltammetry techniques have been employed to follow oxygen reduction reaction (ORR). The mechanism for the electrochemical reduction of oxygen on polycrystalline gold involves 2-step, 2-electron pathways of O 2 to H 2 O 2 and further reduction of H 2 O 2 to H 2 O. The first 2-electron reduction of O 2 to H 2 O 2 passes through superoxide intermediate by 1-electron reduction of oxygen. Kinetic results suggest that the initial 1-electron reduction of oxygen to HO 2 is the rate-determining step of ORR on gold surfaces. The chronoamperometric and RDE studies show a potential dependent change in the number of electrons on gold electrode. The oxygen reduction reaction on boron-doped diamond (BDD) seems to proceed via a direct 4-electron process. The reduction of oxygen on the glassy carbon (GC) electrode is a single step, irreversible, diffusion limited 2-electron reduction process to peroxide.

Evaluation of kinetic parameters of 1, 1'-dibenzoylferrocene in non aqueous methanol solution by cyclic voltammetry (abstract)

International Nuclear Information System (INIS)

Parveen, R.; Kirmani, M.Z.; Naqvi, I.I.

2011-01-01

The electrochemical Kinetic study of 1, 1/sup '/- Dibenzoylferrocene (DBF) at a platinum working electrode in 0.1 mol dm/sup -3/ NaClO/sub 4/ non aqueous medium has been studied by Cyclic voltammetry. The heterogeneous electron transfer rate constants (ks) and the diffusion coefficients (Do) of DBF were estimated at various temperatures (283 - 323 K) and at different scan rates (0.05 - 0.5 V s/sup -1/). A calibration curve, linear over the range of 1 X 10/sup -3/ - 9 X 10/sup -3/ mol dm/sup -3/ ,was plotted at the scan rate of 0.25 Vs/sup -1/. This plot can be used to analyze an unknown sample of the compound. The kinetic data was also used to evaluate the Activation energy (Ea). The thermodynamic parameters such as enthalpy change of activation (delta H/sup */), Entropy change (delta S/sup */) and Gibbs free energy change (delta GH/sup */) were also investigated during the study. (author)

Ensacamento de frutos de pereira cv. Housui Bagging of nashi pear cv. Housui

Directory of Open Access Journals (Sweden)

Ivan Dagoberto Faoro

2004-04-01

Full Text Available Foi avaliada a qualidade de frutos de pêra japonesa cv. Housui (Pyrus pyrifolia var. culta ensacados com diferentes tipos de sacos de papel e em duas épocas: 34 e 83 dias após a florada. O ensacamento não influenciou na firmeza, no teor de sólidos solúveis totais e no peso médio dos frutos. Sacos vermelhos não induziram aumento do pH da polpa, mas o uso de sacos duplos, sacos marrons, sacos de papel kraft marrons e sacos de pipoca brancos aumentaram significativamente o pH. Ao buscar-se maior precocidade de colheita, os melhores resultados foram obtidos com o uso de sacos pequenos de papel manteiga aos 34 dias após a floração e o uso de sacos grandes duplos ou sacos grandes marrons, 83 dias após a plena floração. O ensacamento 34 dias após a plena floração, com sacos grandes de papel duplo de cor marrom ou sacos de papel kraft marrons, ou ainda o uso de sacos pequenos parafinados transparentes de papel manteiga, aos 34 dias, seguidos pela colocação, aos 83 dias, dos dois tipos de sacos grandes citados anteriormente, resultaram em frutos de melhor qualidade externa (película de coloração homogênea e mais clara, lisa e com lenticelas pouco salientes. O uso de sacos vermelhos de papel manteiga e de sacos de pipoca brancos, com ou sem ensacamento prévio com sacos pequenos de papel manteiga parafinado, não resultaram em melhoria substancial da qualidade externa do fruto.The fruit quality of Nashi pears cv. Housui (Pyrus pyrifolia var. culta have been evaluated after bagging with different paper bags at two bagging dates: 34 and 83 days after full bloom. The bagging did not affect the fruit firmness, the total soluble solids and the average fruit weight. Red bags did not affect the pH of the fruit flesh. However the fruit bagged with double bags of brown color, brown kraft paper and white popcorn paper increased the pH. In order to harvest precociously, the use of small transparent paraffin paper bags 34 days after full bloom

Effect of inoculation and nitrogen top-dressing on yields and fodder value of winter pea cv. Maksimirski ozimi in triticale cv. Clercal mixture

Directory of Open Access Journals (Sweden)

Darko Uher

2006-07-01

Full Text Available Two year field trials (1999-2001 were aimed to determine the inoculation seed winter pea and nitrogen top-dressing effect on number and active nodules of pea root and also on the green mass and dry matter yield of winter pea cv. Maksimirski ozimi and triticale cv. Clercal mixture. Immediately before sowing the inoculation of pea seeds was done by the indigenous variety of Rhizobium leguminosarum bv. viciae which belongs to the collection of Department of Microbiology at the Faculty of Agriculture University of Zagreb. The highest total nodule number on pea root (134 was determined on the inoculated variant as well as active nodule (120. Average mixture green mass yields were ranging from 20.9 t ha-1 (control up to 30.1 t ha-1 (inoculation + nitrogen top-dressing. Total dry matter yields were ranging from 3.71 t ha-1 (control up to 5.36 t ha-1 (nitrogen top-dressing. Pea crude protein yields in 2001 were ranging from 500 kg ha-1 (nitrogen top-dressing up to 642 kg ha-1 (inoculation and for triticale, those values were from 322 kg ha-1 (control up to 498 kg ha-1 (nitrogen top-dressing. Total mixture crude proteins yields were from 845 kg ha-1 (control up to 998 kg ha-1 (nitrogen top-dressing.

Characterization of poly(5-hydroxytryptamine)-modified glassy carbon electrode and applications to sensing of norepinephrine and uric acid in preparations and human urines

International Nuclear Information System (INIS)

Shi, Peiying; Miao, Xiaoqing; Yao, Hong; Lin, Sijie; Wei, Biyu; Chen, Jianji; Lin, Xinhua; Tang, Yuhai

2013-01-01

Graphical abstract: A 5-hydroxytryptamine (5-HT) modified electrode was fabricated by electro-polymerization of 5-HT on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) in 0.05 M PBS (pH 7). The characterization of the modified electrode was carried out by atomic force microscopy (AFM), voltammetry and electrochemical impedance spectroscopy (EIS). The mechanism of electro-deposition of 5-HT at GCE was discussed based on electrochemical studies and quantum chemical calculations. The poly(5-HT)-modified electrode could separately detect NE and UA, even in the presence of 10-fold concentration of ascorbic acid (AA) and was applied successfully to the analysis of NE preparations and healthy human urines. Due to the favorable functionalized groups (-NH 2 and -OH), electroactivity, biocompatibility and stability, the poly(5-HT) film could be a promising immobilization matrix for anchoring interested biological molecules in the fabrication of sensors and biosensors. Highlights: ► A poly(5-HT)-modified electrode was fabricated originally by CV. ► The electro-deposition mechanism of 5-HT at GCE was proposed. ► The polymer film shows favorable electrocatalytic properties to NE and UA. ► The modified GCE was applied to the sensing analysis of real samples. -- Abstract: A poly(5-hydroxytryptamine) (poly(5-HT)) modified electrode was fabricated by electropolymerization of 5-hydroxytryptamine (5-HT) on a glassy carbon electrode (GCE) by cyclic voltammetry (CV) in 0.05 M PBS (pH 7). The characterization of poly(5-HT)-modified electrode was carried out by atomic force microscopy (AFM), voltammetry and electrochemical impedance spectroscopy (EIS). Results showed that a brown and heterogeneous film was formed on the surface of the modified electrode. The mechanism of electro-deposition of 5-HT at GCE was discussed. The modified electrode showed good affinity and electrocatalytic properties to some species, such as norepinephrine (NE) and uric acid (UA). Furthermore

Estrutura do pasto disponível e do resíduo pós-pastejo em pastagens de capim-cameroon e capim-marandu Pasture structure and post-grazing herbage mass in pastures of elephantgrass cv. Cameroon and palisadegrass cv. Marandu

Directory of Open Access Journals (Sweden)

Cláudia de Paula Rezende

2008-10-01

Full Text Available Avaliaram-se, em dois experimentos, as características estruturais e o teor de proteína bruta das forrageiras Pennisetum purpureum cv. Cameroon e Brachiaria brizantha cv. Marandu em pastagens submetidas a quatro taxas de lotação rotacionadas. No período das águas, as taxas de lotação impostas a ambas as pastagens foram de 3, 4, 5 e 6 novilhos/ha e, no período seco, de 2, 3, 4 e 5 novilhos/ha. Nos dois experimentos, o capim-cameroon apresentou maior massa de forragem total e massa de forragem verde, que decresceram com o aumento da desfolha imposta pelas taxas de lotação, principalmente no período seco. Nessa forrageira, o aumento da taxa de lotação comprometeu em maior intensidade a fração de matéria seca de lâmina foliar verde. No período das águas, as taxas de lotação que propiciaram maior oferta de massa seca de forragem total, forragem verde e fração de lâmina foliar foram as de 5 e 4 novilhos/ha, respectivamente, para os capins cameroon e marandu. No período seco, no entanto, os maiores valores obtidos para essas variáveis foram, respectivamente, de 4 e 3 novilhos/ha. As taxas de lotação não influenciaram o teor de proteína bruta das gramíneas, que foi maior no componente lâmina foliar verde da planta.Two experiments were carried out to evaluate structural characteristics and crude protein concentration of Pennisetum purpureum cv. Cameroon and Brachiaria brizantha cv. Marandu under four rotational stocking rates. During the rainfall period, the studied stocking rates for both pastures were 3, 4, 5, and 6 steers/ha and in the dry period the stocking rates were 2, 3, 4, and 5 steers/ha. In both experiments, elephantgrass cv. Cameroon produced greater total herbage mass and green herbage mass, which decreased with the increase in defoliation as a result of the used stocking rates, mainly during the dry period. For elephantgrass pastures, the increase in stocking rate had a greater negative effect on the green

A performance comparison of two emotion-recognition implementations using OpenCV and Cognitive Services API

Directory of Open Access Journals (Sweden)

Beltrán Prieto Luis Antonio

2017-01-01

Full Text Available Emotions represent feelings about people in several situations. Various machine learning algorithms have been developed for emotion detection in a multimedia element, such as an image or a video. These techniques can be measured by comparing their accuracy with a given dataset in order to determine which algorithm can be selected among others. This paper deals with the comparison of two implementations of emotion recognition in faces, each implemented with specific technology. OpenCV is an open-source library of functions and packages mostly used for computer-vision analysis and applications. Cognitive services is a set of APIs containing artificial intelligence algorithms for computer-vision, speech, knowledge, and language processing. Two Android mobile applications were developed in order to test the performance between an OpenCV algorithm for emotion recognition and an implementation of Emotion cognitive service. For this research, one thousand tests were carried out per experiment. Our findings show that the OpenCV implementation got a better performance than the Cognitive services application. In both cases, performance can be improved by increasing the sample size per emotion during the training step.

The use of a gold electrode for the determination of amphetamine derivatives and application to their analysis in human urine

Directory of Open Access Journals (Sweden)

Nevešćanin Marina M.

2013-01-01

Full Text Available The catalytic abilities of gold electrode were tested for the quantitative determination of amphetamine (A and 3,4-methylenedioxy-N-methylamphetamine (MDMA standards by their oxidation using cyclic voltammetry (CV. The value of the oxidative currents of A and MDMA standards at 0.80 V vs. SCE in 0.05 M NaHCO3 at the scan rate of 50 mV/s is linear function of concentration in range of 110.9-258.9 mM and 38.7-229.2 mM, respectively. Square wave voltammetry (SWV revealed linear increase of current with concentration of MDMA (range 30.9-91.6 mM and thus quantitative determination of amphetamine derivates. SWV analysis is successfully performed in spiked urine samples as well. A and MDMA in the presence of sucrose and as a content in illegally produced tablets were also analyzed. The voltammetric determination of A and MDMA derivatives using CV and SWV at gold electrode is a rapid, selective and simple procedure and its accuracy was confirmed with reference method, high performance liquid chromatography (HPLC. The spiked urine samples analysis offers additional possibility for the rapid detection of A and MDMA in human urine.

Preparation and electrochemical properties of homogeneous carbon-coated LiFe0.9Mn0.1PO4 as cathode material for lithium-ion batteries

International Nuclear Information System (INIS)

Xu, Yang; Yu, Jingang; Peng, Sui; Liu, Suqin; Wei, Zhongqiang; Li, Xianhong; Li, Yajuan

2012-01-01

Homogeneous carbon-coated LiFe 0.9 Mn 0.1 PO 4 cathode material was synthesized by one-step solid-state reaction using glucose as carbon source. Powder X-ray diffractometry (XRD), transmission electron microscopy (TEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic measurements were employed to characterize the samples. Mn-doping and carbon co-modification did not affect the olivine structure of LiFePO 4 , but improved its kinetics in terms of capacity delivery, polarization and rate capability. When compared with the undoped LiFePO 4 /C, the LiFe 0.9 Mn 0.1 PO 4 /C sample presented good size distribution - around 100-200 nm - and better electrochemical performance. At current rates of 0.1, 1.0, 3.0 and 10.0 C (C = 170 mA g -1 ), the LiFe 0.9 Mn 0.1 PO 4 /C electrode delivered discharge capacities of 154.1, 138.8, 120.0 and 94.0 mA h g -1 , respectively. Results obtained by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) indicated that the polarization and charge transfer resistance of the sample were greatly decreased by Mn-doping. (author)

A real-time camera calibration system based on OpenCV

Science.gov (United States)

Zhang, Hui; Wang, Hua; Guo, Huinan; Ren, Long; Zhou, Zuofeng

2015-07-01

Camera calibration is one of the essential steps in the computer vision research. This paper describes a real-time OpenCV based camera calibration system, and developed and implemented in the VS2008 environment. Experimental results prove that the system to achieve a simple and fast camera calibration, compared with MATLAB, higher precision and does not need manual intervention, and can be widely used in various computer vision system.

Electrochemical Characterization of a PEMEC Using Impedance Spectroscopy

DEFF Research Database (Denmark)

Elsøe, Katrine; Grahl-Madsen, L.; Hjelm, Johan

2017-01-01

In this study, electrochemical impedance spectroscopy (EIS) is applied in combination with cyclic voltammetry (CV) and current density – cell voltage curves (iV-curves) to investigate the processes contributing to the total impedance of a polymer electrolyte membrane electrolysis cell (PEMEC). i......V-curves were linear above 0.35 A cm−2 implying ohmic processes to be performance limiting, however the impedance spectra showed three arcs indicating three electrochemical reactions at these conditions not to be purely ohmic, but also to have capacitive properties. A hypothesis that the composite Ir...

Low density lipoprotein sensor based on surface plasmon resonance

International Nuclear Information System (INIS)

Matharu, Zimple; Sumana, G.; Pandey, M.K.; Gupta, Vinay; Malhotra, B.D.

2009-01-01

Biotinylated heparin has been immobilized onto self-assembled monolayer of 4-aminothiophenol using avidin-biotin specific binding. The modified electrodes have been characterized using surface plasmon resonance technique (SPR), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM) and contact angle (CA) measurements. The interaction of immobilized biotinylated heparin with low density lipoprotein (LDL) has been studied using surface plasmon resonance technique. The biotinylated heparin modified electrode can be used to detect LDL in the range of 20 to 100 mg/dl with the sensitivity of 513.3 m o /μM.

Low density lipoprotein sensor based on surface plasmon resonance

Energy Technology Data Exchange (ETDEWEB)

Matharu, Zimple [Department of Science and Technology Centre on Biomolecular Electronics, National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi-110012 (India); Department of Physics and Astrophysics, University of Delhi, New Delhi-110007 (India); Sumana, G.; Pandey, M.K. [Department of Science and Technology Centre on Biomolecular Electronics, National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi-110012 (India); Gupta, Vinay [Department of Physics and Astrophysics, University of Delhi, New Delhi-110007 (India); Malhotra, B.D., E-mail: bansi.malhotra@gmail.co [Department of Science and Technology Centre on Biomolecular Electronics, National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi-110012 (India)

2009-11-30

Biotinylated heparin has been immobilized onto self-assembled monolayer of 4-aminothiophenol using avidin-biotin specific binding. The modified electrodes have been characterized using surface plasmon resonance technique (SPR), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM) and contact angle (CA) measurements. The interaction of immobilized biotinylated heparin with low density lipoprotein (LDL) has been studied using surface plasmon resonance technique. The biotinylated heparin modified electrode can be used to detect LDL in the range of 20 to 100 mg/dl with the sensitivity of 513.3 m{sup o}/{mu}M.

Electrochemistry and in situ scanning tunnelling microscopy of pure and redox-marked DNA- and UNA-based oligonucleotides on Au(111)-electrode surfaces

DEFF Research Database (Denmark)

Hansen, Allan Glargaard; Salvatore, Princia; Karlsen, K.

2013-01-01

the strongest and in accord with multiple site Ru-attachment. In situ STM disclosed molecular scale features in varying coverage on addition of the metal ions. The Ru-derivatives showed a bias voltage dependent broad maximum in the tunnelling current–overpotential correlation which could be correlated......We have studied adsorption and electrochemical electron transfer of several 13- and 15-base DNA and UNA (unlocked nucleic acids) oligonucleotides (ONs) linked to Au(111)-electrode surfaces via a 50-C6-SH group using cyclic voltammetry (CV) and scanning tunnelling microscopy in aqueous buffer under...

Polytetrafluorethylene film-based liquid-three phase micro extraction coupled with differential pulse voltammetry for the determination of atorvastatin calcium.

Science.gov (United States)

Ensafi, Ali A; Khoddami, Elaheh; Rezaei, Behzad

2013-01-01

In this paper, we describe a new combination method based on polytetrafluorethylene (PTFE) film-based liquid three-phase micro extraction coupled with differential pulse voltammetry (DPV) for the micro extraction and quantification of atorvastatin calcium (ATC) at the ultra-trace level. Different factors affecting the liquid-three phases micro extraction of atorvastatin calcium, including organic solvent, pH of the donor and acceptor phases, concentration of salt, extraction time, stirring rate and electrochemical factors, were investigated, and the optimal extraction conditions were established. The final stable signal was achieved after a 50 min extraction time, which was used for analytical applications. An enrichment factor of 21 was achieved, and the relative standard deviation (RSD) of the method was 4.5% (n = 4). Differential pulse voltammetry exhibited two wide linear dynamic ranges of 20.0-1000.0 pmol L(-1) and 0.001-11.0 µmol L(-1) of ATC. The detection limit was found to be 8.1 pmol L(-1) ATC. Finally, the proposed method was used as a new combination method for the determination of atorvastatin calcium in real samples, such as human urine and plasma.

Health and economic impact of PHiD-CV in Canada and the UK: a Markov modelling exercise.

Science.gov (United States)

Knerer, Gerhart; Ismaila, Afisi; Pearce, David

2012-01-01

The spectrum of diseases caused by Streptococcus pneumoniae and non-typeable Haemophilus influenzae (NTHi) represents a large burden on healthcare systems around the world. Meningitis, bacteraemia, community-acquired pneumonia (CAP), and acute otitis media (AOM) are vaccine-preventable infectious diseases that can have severe consequences. The health economic model presented here is intended to estimate the clinical and economic impact of vaccinating birth cohorts in Canada and the UK with the 10-valent, pneumococcal non-typeable Haemophilus influenzae protein D conjugate vaccine (PHiD-CV) compared with the newly licensed 13-valent pneumococcal conjugate vaccine (PCV-13). The model described herein is a Markov cohort model built to simulate the epidemiological burden of pneumococcal- and NTHi-related diseases within birth cohorts in the UK and Canada. Base-case assumptions include estimates of vaccine efficacy and NTHi infection rates that are based on published literature. The model predicts that the two vaccines will provide a broadly similar impact on all-cause invasive disease and CAP under base-case assumptions. However, PHiD-CV is expected to provide a substantially greater reduction in AOM compared with PCV-13, offering additional savings of Canadian $9.0 million and £4.9 million in discounted direct medical costs in Canada and the UK, respectively. The main limitations of the study are the difficulties in modelling indirect vaccine effects (herd effect and serotype replacement), the absence of PHiD-CV- and PCV-13-specific efficacy data and a lack of comprehensive NTHi surveillance data. Additional limitations relate to the fact that the transmission dynamics of pneumococcal serotypes have not been modelled, nor has antibiotic resistance been accounted for in this paper. This cost-effectiveness analysis suggests that, in Canada and the UK, PHiD-CV's potential to protect against NTHi infections could provide a greater impact on overall disease burden than

Integrated wireless fast-scan cyclic voltammetry recording and electrical stimulation for reward-predictive learning in awake, freely moving rats

Science.gov (United States)

Li, Yu-Ting; Wickens, Jeffery R.; Huang, Yi-Ling; Pan, Wynn H. T.; Chen, Fu-Yu Beverly; Chen, Jia-Jin Jason

2013-08-01

Objective. Fast-scan cyclic voltammetry (FSCV) is commonly used to monitor phasic dopamine release, which is usually performed using tethered recording and for limited types of animal behavior. It is necessary to design a wireless dopamine sensing system for animal behavior experiments. Approach. This study integrates a wireless FSCV system for monitoring the dopamine signal in the ventral striatum with an electrical stimulator that induces biphasic current to excite dopaminergic neurons in awake freely moving rats. The measured dopamine signals are unidirectionally transmitted from the wireless FSCV module to the host unit. To reduce electrical artifacts, an optocoupler and a separate power are applied to isolate the FSCV system and electrical stimulator, which can be activated by an infrared controller. Main results. In the validation test, the wireless backpack system has similar performance in comparison with a conventional wired system and it does not significantly affect the locomotor activity of the rat. In the cocaine administration test, the maximum electrically elicited dopamine signals increased to around 230% of the initial value 20 min after the injection of 10 mg kg-1 cocaine. In a classical conditioning test, the dopamine signal in response to a cue increased to around 60 nM over 50 successive trials while the electrically evoked dopamine concentration decreased from about 90 to 50 nM in the maintenance phase. In contrast, the cue-evoked dopamine concentration progressively decreased and the electrically evoked dopamine was eliminated during the extinction phase. In the histological evaluation, there was little damage to brain tissue after five months chronic implantation of the stimulating electrode. Significance. We have developed an integrated wireless voltammetry system for measuring dopamine concentration and providing electrical stimulation. The developed wireless FSCV system is proven to be a useful experimental tool for the continuous

Solar UV-assisted sample preparation of river water for ultra-trace determination of uranium by adsorptive stripping voltammetry

International Nuclear Information System (INIS)

Woldemichael, G.; Tulu, T.; Flechsig, G.-U.

2012-01-01

The article describes how solar ultraviolet-A radiation can be used to digest samples as needed for voltammetric ultratrace determination of uranium(VI) in river water. We applied adsorptive stripping voltammetry (AdSV) using chloranilic acid as the complexing agent. Samples from the river Warnow in Rostock (Germany) were pretreated with either soft solar UV or wit artificial hard UV from a 30-W source emitting 254-nm light. Samples were irradiated for 12 h, and both methods yielded the same results. We were able to detect around 1 μg.L -1 of uranium(VI) in a sample of river water that also contained dissolved organic carbon at a higher mg.L -1 levels. No AdSV signal was obtained for U(VI) without any UV pre-treatment. Pseudo-polarographic experiments confirmed the dramatic effect of both digestion techniques the the AdSV response. The new method is recommended for use in mobile ultratrace voltammetry of heavy metals for most kinds of natural water samples including tap, spring, ground, sea, and river waters. The direct use of solar radiation for sample pre-treatment represents a sustainable technique for sample preparation that does not consume large quantities of chemicals or energy. (author)

Boron, cobalt and molybdenum in the knottiness and production on pea (Pisum sativum L.) cv Bolero culture

International Nuclear Information System (INIS)

Oliveira Junior, A.; Teixeira, N.T.; Maluf, C.E.; Campos, M.F. de

1989-01-01

The test carried out to study the effect of Boron, Cobalt and Molybdenum on the knottiness and production of the pea (Pisum sativum L.)cv Bolero culture, in controlled conditions. The results showed that Boron didn't affect the knottiness and it increased the production, while, Cobalt and Molybdenum promoted significant increase in the knottiness and productivity. (author) [pt

Electrochemical behavior of CIGS electrodeposition for applications to photovoltaic cells

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyunju; Ji, Changwook; Kim, Yangdo; Hwang, Yoonhwae [Pusan National University, Busan (Korea, Republic of); Lee, Jaeho [Hongik University, Seoul (Korea, Republic of); Jo, Ilguk [Colorado School of Mines, Golden, CO (United States); Kim, Hyoungchan [Korea Institute of Industrial Technology, Busan (Korea, Republic of)

2014-04-15

The electrodeposition mechanism of Cu(In,Ga)Se{sub 2} (CIGS) thin films on ITO substrates was examined by using cyclic voltammetry (CV). The CV study was performed in unitary In, binary In-Se, ternary Cu-In-Se, and quaternary Cu-In-Ga-Se systems. CV of the Cu-In-Ga-Se system revealed a reduction peak at -0.6 V with the addition of GaCl{sub 3} and showed that the current density was affected significantly by the concentrations of GaCl{sub 3} and InCl{sub 3}. This is probably due to the adsorption-site competition between In{sup 3+} and Ga{sup 3+} on the electrode surface. Energy dispersive X-ray spectroscopy confirmed the CV results. The composition of Ga in the CIGS films increased with increasing concentration of GaCl{sub 3} in the electrolyte whereas the composition of In decreased sharply. The as-deposited films were annealed at 500 .deg. C in a N{sub 2} atmosphere for crystallization. XRD revealed three major peaks corresponding to the (112), (220) and (312) planes of CIGS chalcopyrite respectively. On the other hand, a secondary phase, such as In{sub 4}Se{sub 3}, was observed in the CIGS films containing a high In composition.

Verification of the systematic position of California brome (Bromus carinatus Hook. and Arn., Poaceae, cv. 'Broma', on the basis of analysis of issr markers

Directory of Open Access Journals (Sweden)

Agnieszka Sutkowska

2012-10-01

Full Text Available ‘Broma’ is a grass cultivar belonging to the species Bromus carinatus. In the Lists of Agricultural Plant Varieties of the Research Centre for Cultivar Testing (COBORU, it is shown as Bromus willdenowii (= B. catharticus, B. unioloides (List of Agricultural Plant Varieties 1989-2009, whereas already in 1984 Mirek demonstrated on the basis of morphological analysis that this was a different closely related species – B. carinatus. The aim of the present study was to verify the species affiliation of cv. ‘Broma’. The conducted analysis of ISSR molecular markers included representatives of cv. ‘Broma” as well as of B. carinatus and B. willdenowii. The method used allowed the identification of molecular markers of the above-mentioned taxa. The numerical analysis of the obtained results suggests that cv. ‘Broma’ should be classified in the species B. carinatus, not B. willdenowii.

CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Terra-FM1_Edition1-CV)

Science.gov (United States)

Wielicki, Bruce A. (Principal Investigator)

Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2006-11-02] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

Production of calibration sources and/or radioactive tracers with the cyclotron CV-28

International Nuclear Information System (INIS)

Osso Junior, Joao Alberto

1995-01-01

The present stage of production of calibration sources and radioactive tracers with the Cyclotron CV-28 is described. Among the methods already developed special attention is given to the production of 57 Co, 109 Cd and 111 In. (author). 3 refs

Si and SiC Schottky diodes in smart power circuits: a comparative study by I-V-T and C-V measurements

Energy Technology Data Exchange (ETDEWEB)

Hadzi-Vukovic, J [Infineon Technologies, Siemensstrasse 2, 9500 Villach (Austria); Jevtic, M [Institute for Physics, Pregrevica 118, 11080 Zemun (Serbia and Montenegro); Rothleitner, H [Infineon Technologies, Siemensstrasse 2, 9500 Villach (Austria); Croce, P Del [Infineon Technologies, Siemensstrasse 2, 9500 Villach (Austria)

2005-01-01

In this paper we analyze a possibility of manufacturing and implementation of Schottky diodes in the smart power circuits. Three different Schottky diodes, in three different technologies, are realized in Si and SiC processes. The electrical characterizations with I-V-T and C-V measurements are done for all structures. It is shown that Si based Schottky diodes also are suitable to be integrated in the typical smart power circuits.

Si and SiC Schottky diodes in smart power circuits: a comparative study by I-V-T and C-V measurements

International Nuclear Information System (INIS)

Hadzi-Vukovic, J; Jevtic, M; Rothleitner, H; Croce, P Del

2005-01-01

In this paper we analyze a possibility of manufacturing and implementation of Schottky diodes in the smart power circuits. Three different Schottky diodes, in three different technologies, are realized in Si and SiC processes. The electrical characterizations with I-V-T and C-V measurements are done for all structures. It is shown that Si based Schottky diodes also are suitable to be integrated in the typical smart power circuits

In-situ STM study of phosphate adsorption on Cu(111), Au(111) and Cu/Au(111) electrodes

DEFF Research Database (Denmark)

Schlaup, Christian; Horch, Sebastian

2013-01-01

The interaction of Cu(111), Au(111) and Cu-covered Au(111) electrodes with a neutral phosphate buffer solution has been studied by means of cyclic voltammetry (CV) and in situ electrochemical scanning tunneling microscopy (EC-STM). Under low potential conditions, both the Cu(111) and the Au(111......) surface appear apparently adsorbate free, indicated by the presence of a (4×4) structure and the herringbone surface reconstruction, respectively. Upon potential increase, phosphate anions adsorb on both surfaces and for Cu(111) the formation of a (√3×√3)R30° structure is found, whereas on Au(111) a "(√3......×√7)" structure is formed. For a Cu-submonolayer on Au(111), coadsorption of phosphate anions leads to the formation of a (2×2) vacancy structure within an assumed pseudomorphic structure of the Cu-submonolayer with the phosphate anions occupying the vacancies. When desorbing the phosphate anions at low...

Anodic stripping voltammetry of antimony using gold nanoparticle-modified carbon screen-printed electrodes

International Nuclear Information System (INIS)

Dominguez Renedo, Olga; Arcos Martinez, M. Julia

2007-01-01

Carbon screen-printed electrodes (CSPE) modified with gold nanoparticles present an interesting alternative in the determination of antimony using differential pulse anodic stripping voltammetry. Metallic gold nanoparticles deposits have been obtained by direct electrochemical deposition. Scanning electron microscopy measurements show that the electrochemically synthesized gold nanoparticles are deposited in aggregated form. Any undue effects caused by the presence of foreign ions in the solution were also analyzed to ensure that common interferents in the determination of antimony by ASV. The detection limit for Sb(III) obtained was 9.44 x 10 -10 M. In terms of reproducibility, the precision of the above mentioned method in %R.S.D. values was calculated at 2.69% (n = 10). The method was applied to determine levels of antimony in seawater samples and pharmaceutical preparations

Electrochemical Behaviour of Ni and Ni-PVC Electrodes for the Electroxidation of Ethanol

International Nuclear Information System (INIS)

Mohd Syafiq Hamdan; Norazzizi Nordin; Siti Fathrita Mohd Amir; Riyanto; Mohamed Rozali Othman

2011-01-01

In this study, two nickel based electrodes were prepared; nickel foil and nickel-polyvinylchloride (Ni-PVC), in order to study their electrochemical behavior using cyclic voltammetry, CV and chronocoulometry, CC. Ni electrode was prepared from Ni metal foil while Ni-PVC electrode was prepared by mixing a weighed portion of Ni powder and PVC in THF solvent, swirled until the suspension was homogeneous and drying the suspension in an oven at 50 degree Celsius for 3 h. The dry sample was then placed in a 1 cm diameter stainless steel mould and pressed at 10 ton/ cm 2 . From CV data, Ni-PVC electrode showed a better electrochemical behavior compared to Ni metal foil electrode. The use of Ni-PVC electrode at higher concentration of supporting electrolyte (1.0 M KOH) was better than at lower concentration of the same supporting electrolyte in electroxidation of ethanol. In addition to acetic acid, the oxidation of ethanol also produced ethyl acetate and acetaldehyde. (author)

Sensitivity of Phaseolus vulgaris cv. `CIAP 7247F' plants to Glufosinate ammonium herbicide in greenhouse

Directory of Open Access Journals (Sweden)

Idalmis Bermúdez-Caraballoso

2014-01-01

Full Text Available Genetic breeding in Phaseolus by genetic transformation requires an efficient selection system. The present investigation was aimed to determine the minimum lethal concentration of glufosinate-ammonium (Finale ® in beans plants cv. `CIAP 7247F' grown in greenhouse. Different concentrations of the herbicide were applied to the foliage of plants in acclimatization phase (20, 30 y 40 mg l-1 and the control. Results showed that the minimum lethal concentration in plants in acclimatization phase was 30 mg l-1. Results also demonstrated that is possible the use of the herbicide as a selective agent of beans transformants cv. `CIAP 7247F' carrying the bar gene. Keywords: genetic transformation, herbicide, selective agent, tissue culture

Efecto del agua caliente en la germinación de las semillas de Leucaena leucocephala cv. Perú Effect of hot water on the germination of seeds from Leucaena leucocephala cv. Peru

Directory of Open Access Journals (Sweden)

Yolanda González

2008-03-01

Full Text Available En un diseño de clasificación simple se estudió el efecto del tratamiento pregerminativo con agua a 80ºC por dos minutos, en la germinación de las semillas de Leucaena leucocephala cv. Perú almacenadas al frío y al ambiente, durante siete años. Se demostró la presencia de dormancia moderada, con un porcentaje de germinación de 67,3% en la semilla recién cosechada, que fue inferior a la potencialidad germinativa mostrada a través de su alta viabilidad (98,2%. En condiciones controladas y al ambiente la germinación presentó diferencias altamente significativas para los meses de almacenamiento (PIn a simple classification design the effect of the pregerminative treatment with water at 80ºC for two minutes, on the germination of seeds from Leucaena leucocephala cv. Peru stored under cold-storage room and ambient conditions, for seven years, was studied. The presence of moderate dormancy was proven, with a germination percentage of 67,3% in the newly harvested seed, which was lower than the germination potential shown through their high viability (98,2%. Under controlled and ambient conditions germination showed highly significant differences for the storage months (P<0,001 and the highest values without applying pregerminative treatment were achieved at 12, 42 and 48 months (77,6; 71,8 and 75,7% and at 18 months (81,8%, respectively. The application of water at 80ºC for two minutes produced significant increases (P<0,001 in germination with regards to the untreated seed and under controlled conditions it was higher at 12, 24 and 48 months (98,6; 99,6 and 98,5% and under ambient conditions at 6, 12 and 18 months (96,2; 97,7 and 97,7%. It is concluded that the newly harvested seeds from L. leucocephala cv. Peru show around 30% dormancy and can increase their germination by applying water to them at 80ºC for two minutes.

Portable Lock-in Amplifier-Based Electrochemical Method to Measure an Array of 64 Sensors for Point-of-Care Applications.

Science.gov (United States)

Hrdý, Radim; Kynclová, Hana; Klepáčová, Ivana; Bartošík, Martin; Neužil, Pavel

2017-09-05

We present a portable lock-in amplifier-based electrochemical sensing system. The basic unit (cluster) consists of four electrochemical cells (EC), each containing one pseudoreference electrode (PRE) and one working electrode (WE). All four ECs are simultaneously interrogated, each at different frequencies, with square wave pulses superposed on a sawtooth signal for cyclic voltammetry (CV). Lock-in amplification provides independent read-out of four signals, with excellent noise suppression. We expanded a single cluster system into an array of 16 clusters by using electronic switches. The chip with an array of ECs was fabricated using planar technology with a gap between a WE and a PRE of ≈2 μm, which results in partial microelectrode-type behavior. The basic electrode characterization was performed with the model case using a ferricyanide-ferrocyanide redox couple (Fe 2+ /Fe 3+ ) reaction, performing CV and differential pulse voltammetry (DPV). We then used this system to perform cyclic lock-in voltammetry (CLV) to measure concurrently responses of the four ECs. We repeated this method with all 64 ECs on the chip. The standard deviation of a peak oxidation and reduction current in a single channel consisting of 13 ECs was ≈7.46% and ≈5.6%, respectively. The four-EC configuration in each measured spot allows determination of nonperforming ECs and, thus, to eliminate potential false results. This system is built in a portable palm-size format suitable for point-of-care applications. It can perform either individual or multiple measurements of active compounds, such as biomarkers.

Modeling the butterfly: the voltammetry of ((sqrt(3)xsqrt(3))R30 and p(2x2) overlayers of (111) electrodes

NARCIS (Netherlands)

Koper, M.T.M.; Lukkien, J.J.

2000-01-01

The voltammetry of the formation of (v3×v3)R30° and p(2×2) overlayers on (111) electrodes is modeled by analytical and Monte Carlo techniques. Both ordered structures are formed by second-order order–disorder phase transitions that lead to sharply-peaked ‘butterfly’ features in the voltammogram. The

Exploring the SDSS Data Set with Linked Scatter Plots. I. EMP, CEMP, and CV Stars

Energy Technology Data Exchange (ETDEWEB)

Carbon, Duane F.; Henze, Christopher; Nelson, Bron C., E-mail: Duane.F.Carbon@nasa.gov [NASA Ames Research Center, NASA Advanced Supercomputing Facility, Moffett Field, CA, 94035-1000 (United States)

2017-02-01

We present the results of a search for extremely metal-poor (EMP), carbon-enhanced metal-poor (CEMP), and cataclysmic variable (CV) stars using a new exploration tool based on linked scatter plots (LSPs). Our approach is especially designed to work with very large spectrum data sets such as the SDSS, LAMOST, RAVE, and Gaia data sets, and it can be applied to stellar, galaxy, and quasar spectra. As a demonstration, we conduct our search using the SDSS DR10 data set. We first created a 3326-dimensional phase space containing nearly 2 billion measures of the strengths of over 1600 spectral features in 569,738 SDSS stars. These measures capture essentially all the stellar atomic and molecular species visible at the resolution of SDSS spectra. We show how LSPs can be used to quickly isolate and examine interesting portions of this phase space. To illustrate, we use LSPs coupled with cuts in selected portions of phase space to extract EMP stars, CEMP stars, and CV stars. We present identifications for 59 previously unrecognized candidate EMP stars and 11 previously unrecognized candidate CEMP stars. We also call attention to 2 candidate He ii emission CV stars found by the LSP approach that have not yet been discussed in the literature.

Voltammetric Studies on Vitamins D2 and D3 in Organic Solvents

International Nuclear Information System (INIS)

Chan, Ya Yun; Yue, Yanni; Webster, Richard D.

2014-01-01

Highlights: • Vitamins D 2 and D 3 undergo a chemically irreversible oxidation process. • The electrochemical oxidation occurs via one-electron on short (CV) time-scales. • On long time scales (electrolysis) the oxidation occurs via two-electrons. • Chemical oxidation was performed using two molar equivalents of NO + . • Oxidation occurs at the triene moiety. - Abstract: The electrochemical behavior of vitamins D 2 and D 3 were examined by performing cyclic voltammetry (CV), rotating disk electrode voltammetry, controlled potential electrolysis and chemical oxidation in aprotic organic solvents. Both vitamins were electrochemically oxidized in dichloromethane and acetonitrile (E p ox ∼ +0.8 vs. (Fc/Fc + )/V, where E p ox is the anodic peak potential and Fc = ferrocene) via a one-electron chemically irreversible process on the short voltammetric time scale (≤ seconds). Varying the scan rate (0.1 V s −1 to 20 V s −1 ) and temperature (233 K to 293 K) did not strongly affect the voltammetric response recorded on platinum and glassy carbon electrode surfaces with the oxidation process remaining chemically irreversible over the range of scan rates and temperatures tested, indicating that the initially formed cation radical was not long-lived. Repetitive CV experiments indicated that the oxidized product partially adsorbed onto the electrode surface, resulting in diminishing peak currents with multiple scans. Bulk controlled potential electrolysis of the vitamin D compounds performed by alternating several cycles of oxidative electrolysis and reductive pulsed stripping proved to be effective in stripping the adsorbed species off the electrode surfaces. Longer time scale bulk electrolysis experiments led to the detection of a new oxidation peak appearing at less positive potentials as the electrolysis progressed, suggesting that the compounds underwent oxidation on long time scales (minutes to hours) via a two electron process. The vitamins were most

Spectral investigations and DFT studies of 3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione (caffeine) interaction and recognition by single amino acid derived self-assembled nanostructures

Science.gov (United States)

Govindhan, R.; Karthikeyan, B.

2018-03-01

Recognition of xanthine alkaloid caffeine with 3,5-bis(trifluoromethyl)benzylamine derived peptide nanotubes (BTTPNTs) through chemical interaction have been achieved through the host-guest like interaction. DFT simulation is carried out for caffeine interacted with BTTPNTs system and also experimentally characterized by ultraviolet-visible (UV-vis) absorbance, confocal Raman spectra (CRS) with microscopic imaging (CRM), FT-Raman, surface enhanced Raman scattering (SERS), UV-diffuse reflectance spectra (UV-DRS), high resolution transmission electron microscopy (HR-TEM) and cyclic voltammetry (CV) studies. The results are used to examine the morphologies, size of the nanostructure and study of its interaction with the caffeine molecule. The results show that BTTPNTs is having potential for sensing the caffeine molecules through the binding occurred from the NH2 of tyrosine moiety of the BTTPNTs. This intermolecular association through face-to-face stacking of BTTPNTs is explained by detailed DFT calculations.

The Graphene/l-Cysteine/Gold-Modified Electrode for the Differential Pulse Stripping Voltammetry Detection of Trace Levels of Cadmium

OpenAIRE

Yu Song; Chao Bian; Jianhua Tong; Yang Li; Shanghong Xia

2016-01-01

Cadmium(II) is a common water pollutant with high toxicity. It is of significant importance for detecting aqueous contaminants accurately, as these contaminants are harmful to human health and environment. This paper describes the fabrication, characterization, and application of an environment-friendly graphene (Gr)/l-cysteine/gold electrode to detect trace levels of cadmium (Cd) by differential pulse stripping voltammetry (DPSV). The influence of hydrogen overflow was decreased and the curr...

Introduction of a carbon paste electrode based on nickel carbide for investigation of interaction between warfarin and vitamin K1.

Science.gov (United States)

Torkashvand, Maryam; Gholivand, Mohammad Bagher; Taherpour, Avat Arman; Boochani, Arash; Akhtar, Arsalan

2017-05-30

In this paper a novel electrochemical sensor based on nickel carbide (Ni 3 C) nanoparticles as a new modifier was constructed. Ni 3 C nanoparticle was synthesized and characterized by scanning electron microscopy, X-ray diffraction and first-principles study. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) studies confirmed the electrode modification. Afterwards, the new electrode for the first time was used for interaction study between vitamin K1 and warfarin as an anticoagulant drug by differential pulse voltammetry. The adduct formation between the drug and vitamin K1 was improved by decreasing in anodic peak current of warfarin in the presence of different amounts of vitamin K1. The binding constant between warfarin and vitamin K1 was obtained by voltammetric and UV-vis and fluorescence spectroscopic methods. The molecular modeling method was also performed to explore the structural features and binding mechanism of warfarin to vitamin K1. The different aspects of modeling of vitamin K1 and warfarin and their adduct structures confirmed the adduct formation by hydrogen bonding. Copyright © 2017 Elsevier B.V. All rights reserved.

Somaclonal variation in micropropagated Heliconia bihai cv. Lobster Claw I plantlets (Heliconiaceae Variação somaclonal em mudas micropropagadas de Helicônia, Heliconia Bihai cv. Lobster Claw I (Heliconiaceae

Directory of Open Access Journals (Sweden)

Paulo Hercílio Viegas Rodrigues

2008-12-01

Full Text Available The occurrence of somaclonal variation is described in various cultures of agronomic interest. Such variation can be of benefit in the development of new flower varieties. In this study, the occurrence of somaclonal variation in micropropagated changes of Heliconia bihai cv. Lobster Claw I was investigated. Stem apexes were introduced in MS culture media with the addition of 2.5 mg L-1 of benzylaminopure (BAP and 500 mg L-1 of sodium cefotaxime. After selecting the apex stem, it was sub-cultivated in MS media and supplemented with 4.0 mg L-1 of BAP to induce side buds. To conduct the trial, 2,000 plants were selected and compared with plants originated from rhizomes. To calculate the percentage of the variants, the plant stature, the form and color of leaves and pseudostem were evaluated. The plants with buds presenting the same type of variation were considered as variants. The occurrence of three types of somaclonal variants was observed: Variation of the Chlorophyll in the Leaf, Low Stature Variant and Pseudostem and Petiole Color Variant, the latter with ornamental potential. The somaclonal variation rate for Heliconia bihai cv Lobster Claw I, under the proposed conditions, was 61.40%.A ocorrência de variação somaclonal é descrita em diversas culturas de interesse agronômico. A floricultura pode beneficiar-se dessa variabilidade, com a obtenção de novas variedades. Nesse trabalho, estudou-se a ocorrência de variação somaclonal em mudas micropropagadas de Heliconia bihai cv. Lobster Claw I. Ápices caulinares foram introduzidos em meio de cultivo MS com adição de 2,5 mg L-1 de benzilaminopurina (BAP e 500 mg L-1 de cefotaxima sódica. Após a seleção do ápice caulinar, o explante foi subcultivado em meio MS suplementado com 4,0 mg L-1 de BAP para indução de brotações. Foram selecionadas, ao acaso, 2.000 mudas e comparadas com mudas originadas de rizomas, para compor o ensaio. No cálculo da porcentagem dos variantes

A comparison of aphasic and non-brain-injured adults on a dichotic CV-syllable listening task.

Science.gov (United States)

Shanks, J; Ryan, W

1976-06-01

A dichotic CV-syllable listening task was administered to a group of eleven non-brain-injured adults and to a group of eleven adult aphasics. The results of this study may be summarized as follows: 1)The group of non-brain-injured adults showed a slight right ear advantage for dichotically presented CV-syllables. 2)In comparison with the control group the asphasic group showed a bilateral deficit in response to the dichotic CV-syllables, superimposed on a non-significant right ear advantage. 3) The asphasic group demonstrated a great deal of intersubject variability on the dichotic task with six aphasics showing a right ear preference for the stimuli. The non-brain-injured subjects performed more homogeneously on the task. 4) The two subgroups of aphasics, a right ear advantage group and a left ear advantage group, performed significantly different on the dichotic listening task. 5) Single correct data analysis proved valuable by deleting accuracy of report for an examination of trials in which there was true competition for the single left hemispheric speech processor. These results were analyzed in terms of a functional model of auditory processing. In view of this model, the bilateral deficit in dichotic performance of the asphasic group was accounted for by the presence of a lesion within the dominant left hemisphere, where the speech signals from both ears converge for final processing. The right ear advantage shown by one asphasic subgroup was explained by a lesion interfering with the corpus callosal pathways from the left hemisphere; the left ear advantage observed within the other subgroup was explained by a lesion in the area of the auditory processor of the left hemisphere.

Performance enhancement of polymer electrolyte membrane fuel cells by dual-layered membrane electrode assembly structures with carbon nanotubes.

Science.gov (United States)

Jung, Dong-Won; Kim, Jun-Ho; Kim, Se-Hoon; Kim, Jun-Bom; Oh, Eun-Suok

2013-05-01

The effect of dual-layered membrane electrode assemblies (d-MEAs) on the performance of a polymer electrolyte membrane fuel cell (PEMFC) was investigated using the following characterization techniques: single cell performance test, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). It has been shown that the PEMFC with d-MEAs has better cell performance than that with typical mono-layered MEAs (m-MEAs). In particular, the d-MEA whose inner layer is composed of multi-walled carbon nanotubes (MWCNTs) showed the best fuel cell performance. This is due to the fact that the d-MEAs with MWCNTs have the highest electrochemical surface area and the lowest activation polarization, as observed from the CV and EIS test.

Efeito de substrato artificial no enraizamento de estacas de calanchoe (Kalanchoe x blossfeldiana cv. singapur, crassulaceae Artificial substract effect on the rooting of calanchoe (Kalanchoe x blossfeldiana cv. singapur, crassulaceae cuttings

Directory of Open Access Journals (Sweden)

A.L. Gonçalves

1994-08-01

Full Text Available Dez misturas artificiais foram estudadas para avaliar o efeito sobre o enraizamento de estacas apicais de Kalanchoe x blossfeldiana cv. Singapur, da família Crassulaceae. Essas misturas foram as seguintes: vermiculita + casca de arroz tostada nas proporções 1:1, 2:1 e 3:1; vermiculita + torta de filtro Oliver nas proporções 1:1, 2:1 e 3:1; vermiculita + turfa da região de Atibaia-SP, nas proporções 1:l, 2:le3:l; vermiculita + casca de pinheiro (mistura comercial. Os melhores resultados foram obtidos com a mistura vermiculita + torta de filtro Oliver em todas as proporções, vermiculita + casca de arroz tostada 3:1 e vermiculita + turfa 3:1. Os piores desempenhos foram os das misturas vermiculita + casca de pinheiro e vermiculita + turfa 1:1.Ten different artificial mixtures were studied as rooting media for Kalanchoe x blossfeldiana cv. Singapur cuttings. They were: vermiculite + toasted rice hulls (1:1, 2:1, 3:1; vermiculite + Oliver filter cake (1:1, 2:1, 3:1; vermiculite + peat (1:1, 2:1, 3:1; and vermiculite + pine bark (commercial mixture. The best results were observed for vermiculite + Oliver filter cake (1:1, 2:1, 3:1, vermiculite + toasted rice hulls (3:1 and vermiculite + peat (3:1. The worst results were observed with vermiculite + pine bark and vermiculite + peat (1:1.

Simultaneous determination of paracetamol and penicillin V by square-wave voltammetry at a bare boron-doped diamond electrode

International Nuclear Information System (INIS)

Švorc, Ľubomír; Sochr, Jozef; Tomčík, Peter; Rievaj, Miroslav; Bustin, Dušan

2012-01-01

Highlights: ► Unmodified BDD electrode = sensitive electrochemical sensor for drugs determination. ► No special pretreatment of samples except simple dilution. ► Selective method, common compounds present in urine do not interfere in high excess. ► Simultaneous determination of PAR and PEN has yet not been published in literature. - Abstract: A simple, sensitive and selective square-wave voltammetry method for simultaneous determination of paracetamol and penicillin V on a bare (unmodified) boron-doped diamond electrode has been developed. The good potential separation of about 0.35 V between the oxidation peak potentials of both drugs present in mixture was found. It was found by cyclic voltammetry that paracetamol gave quasireversible wave and penicillin V provided irreversible oxidation peak. The effect of supporting electrolyte, pH and scan rate on voltammetric response of both drugs was studied to select the optimum experimental conditions. The optimal conditions for quantitative simultaneous determination were obtained in acetate buffer solution at pH 5.0. The oxidation peak of paracetamol and penicillin V showed a systematic increase in peak currents with increase of their concentration. The calibration curves for the simultaneous determination of paracetamol and penicillin V exhibited the good linear responses within the concentration range from 0.4 to 100 μM for both drugs. The detection limit was established to 0.21 and 0.32 μM for paracetamol and penicillin V, respectively. The method proved the good sensitivity, repeatability (RSD of 1.5 and 2.1% for mixture solution of 10 μM PCM and PEN) and selectivity when influence of interferents commonly existing in human urine was negligible. The practical analytical utility of proposed method was demonstrated by simultaneous determination of paracetamol and penicillin V in human urine samples, with results similar to those obtained using a high-performance liquid chromatography method as an

FAKTOR-FAKTOR KEPUASAN PELANGGAN DAN LOYALITAS PELANGGAN: Studi Kasus Pada CV. Sarana Media Advertising Surabaya

Directory of Open Access Journals (Sweden)

Trisno Musanto

2004-01-01

Full Text Available This reseach briefly explains to what extent customer satisfaction has significant influence to the customer loyalty of 'Iklan Jitu' Jawa Pos newspaper in Sarana Media Advertising. Moreover, it also explores variable that give the biggest contribution to the customer loyalty. Four variables are using as customer satisfaction representatives, which are reliability, response to and remedy of problems, sales experience and convenience of acquisition. Finally, the findings shows that sales experience is the biggest contributor to the customer loyalties. Abstract in Bahasa Indonesia : Penelitian ini dimaksudkan untuk mengetahui sejauh mana kepuasan pelanggan mempunyai pengaruh signifikan terhadap loyalitas pelanggan Iklan Jitu surat kabar Jawa Pos pada CV.Sarana Media Advertiseng dan variabel mana yang memberikan kontribusi terbesar pengaruhnya terhadap loyalitas pelanggan. Dalam penelitian ini mengunakan empat variabel untuk mewakili keppuasan pelanggan yang meliputi : reliability,response to and remedy of problems, sales experience dan convenience of acquisition. Dari hasil perhitungan diketahui bahwa sales experience memberikan kontribusi terbesar terhadap loyalitas pelanggan. Kata kunci : kepuasan pelanggan, loyaliras pelanggan.

IMPLEMENTASI SIX SIGMA UNTUK PENINGKATAN KUALITAS SANDAL DI CV. SANCU CREATIVE INDONESIA

Directory of Open Access Journals (Sweden)

Sonny Koeswara

2013-10-01

Full Text Available Six Sigma adalah metodologi yang terstruktur untuk memperbaiki proses yang difokuskan pada usaha mengurangi variasi pada proses sekaligus mengurangi defect pada produk dengan menggunakan pendekatan statistik dan Problem solving tools secara intensif. Tujuan dari metode Six Sigma ini adalah untuk mendapatkan zero defect dengan menjalankan 5 tahapan yaitu : Define, Measure, Analyze, Improve ,dan Control (DMAIC. Tulisan ini bertujuan untuk menerapkan metode Six Sigma di Cv. Sancu Creative Indonesia yang merupakan badan usaha yang memproduksi sandal karakter. Masalah yang terjadi adalah adanya defect sol sandal mudah mengelupas yang berakibat pada kualitas sandal dan salah satu penghambat visi dan misi perusahaan. Penelitian ini dibagi dalam 5 tahap. Tahap pertama adalah Define, yang bertujuan untuk mengidentifikasi masalah yang terjadi yang berasal dari kebutuhan konsumen berdasarkan data DCA dan OQC defect di CV. SANCU. Tahap kedua adalah Measure yaitu mengukur kondisi level performance proses saat ini (Z-Level. Pada tahap ini dilakukan validasi sistem pengukuran  dengan  menghitung  Dpo,Dpmo,Yield  dan  Sigma  level.  Tahap  ketiga  adalah Analyze yaitu menentukan faktor-faktor penyebab terjadinya sol sandal mengelupas dan sekaligus menentukan vital faktor. Hasil dari pengujian menunjukkan bahwa vital faktor adalah waktu penempelan.Tahap keempat adalah improvement yaitu melakukan perbaikan dengan memberikan timer diarea lokasi penempelan. Control yaitu kegiatan melakukan pemantauan dari hasil perbaikan yang telah di implementasikan Kondisi   setelah   perbaikan   menghasilkan   perubahan   yang   signifikan   terhadap kapabilitas performance pada sandal, yaitu perubahan nilai sigma level setelah perbaikan 4.74s dari yang sebelum perbaikan adalah 4.26 s. Dari nilai tersebut dapat disimpulkan bahwa metode waktu penempelan dan kontrol pada performance sandal Cv. Sancu sudah membaik.

Studies on PEM fuel cell noble metal catalyst dissolution

DEFF Research Database (Denmark)

Andersen, S. M.; Grahl-Madsen, L.; Skou, E. M.

2011-01-01

A combination of electrochemical, spectroscopic and gravimetric methods was carried out on Proton Exchange Membrane (PEM) fuel cell electrodes with the focus on platinum and ruthenium catalysts dissolution, and the membrane degradation. In cyclic voltammetry (CV) experiments, the noble metals were...... found to dissolve in 1 M sulfuric acid solution and the dissolution increased exponentially with the upper potential limit (UPL) between 0.6 and 1.6 vs. RHE. 2-20% of the Pt (depending on the catalyst type) was found to be dissolved during the experiments. Under the same conditions, 30-100% of the Ru...... (depending on the catalyst type) was found to be dissolved. The faster dissolution of ruthenium compared to platinum in the alloy type catalysts was also confirmed by X-ray diffraction measurements. The dissolution of the carbon supported catalyst was found one order of magnitude higher than the unsupported...

PENJADWALAN PRODUKSI MENGGUNAKAN ALGORITMA JADWAL NON DELAY UNTUK MEMINIMALKAN MAKESPAN STUDI KASUS DI CV. BIMA MEBEL

Directory of Open Access Journals (Sweden)

Setyo Harto

2016-04-01

Full Text Available CV. Mebel Bima merupakan sebuah perusahaan yang bergerak dalam bidang pengerjaan kayu khususnya pembuatan berbagai model daun pintu dan kusen. Tipe aliran produksi di perusaaan adalah job shop dikarenakan pengerjaan setiap job memiliki aliran yang berbeda di setiap mesinnya. Penjadwalan produksi di perusahaan adalah diurutkan berdasarkan total waktu penyelesaian job terlama sampai yang terkecil. Permasalahan di perusahaan selama ini adalah besarnya makespan yang dihasilkan oleh penjadwalan dengan metode perusahaan sehingga perusahaan mengalami keterlambatan penyelesaian job dari waktu yang sudah ditetapkan sebelumnya. Berdasarkan masalah tersebut penelitian ini bertujuan untuk menentukan urutan pengerjaan job dengan makespan yang lebih kecil menggunakan algoritma jadwal non delay dengan prioritas SPT. Tahap-tahap dalam penelitian ini adalah dimulai dari observasi langsung di perusahaan, studi literatur, perumusan masalah, pengambilan data, pengolahan data, dan terakhir adalah pembandingan hasil penjadwalan. Metode penjadwalan produksi yang digunakan di perusahaan menghasilkan makespan sebesar 194,4 jam atau 25 hari kerja (1 hari terdapat 8 jam kerja, sedangkan usulan penjadwalan dengan menggunakan algoritma jadwal non delay menghasilkan makespan sebesar 168,79 jam atau 22 hari kerja, dengan demikian Penjadwalan dengan menggunakan algoritma jadwal non delay dapat menghemat total waktu pengerjaan sebesar 24,85 jam atau 3 hari kerja lebih 0,85 jam.

Electrochemical DNA biosensor for detection of porcine oligonucleotides using ruthenium(II) complex as intercalator label redox

Energy Technology Data Exchange (ETDEWEB)

Halid, Nurul Izni Abdullah; Hasbullah, Siti Aishah; Heng, Lee Yook; Karim, Nurul Huda Abd [School of Chemical Sciences and Food Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor Darul Ehsan (Malaysia); Ahmad, Haslina; Harun, Siti Norain [Chemistry Department, Faculty of Science, Universiti Putra Malaysia, 43400, Serdang, Selangor (Malaysia)

2014-09-03

A DNA biosensor detection of oligonucleotides via the interactions of porcine DNA with redox active complex based on the electrochemical transduction is described. A ruthenium(II) complex, [Ru(bpy){sub 2}(PIP)]{sup 2+}, (bpy = 2,2′bipyridine, PIP = 2-phenylimidazo[4,5-f[[1,10-phenanthroline]) as DNA label has been synthesized and characterized by 1H NMR and mass spectra. The study was carried out by covalent bonding immobilization of porcine aminated DNA probes sequences on screen printed electrode (SPE) modified with succinimide-acrylic microspheres and [Ru(bpy){sub 2}(PIP)]{sup 2+} was used as electrochemical redox intercalator label to detect DNA hybridization event. Electrochemical detection was performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the ruthenium (II) complex was active. The results indicate that the interaction of [Ru(bpy){sub 2}(PIP)]{sup 2+} with hybridization complementary DNA has higher response compared to single-stranded and mismatch complementary DNA.

Computational investigation and synthesis of a sol-gel imprinted material for sensing application of some biologically active molecules

Energy Technology Data Exchange (ETDEWEB)

Atta, Nada F., E-mail: Nada_fah1@yahoo.com [Department of Chemistry, Faculty of Science, University of Cairo, Post Code 12613, Giza (Egypt); Hamed, Maher M.; Abdel-Mageed, Ali M. [Department of Chemistry, Faculty of Science, University of Cairo, Post Code 12613, Giza (Egypt)

2010-05-14

A hybrid sol-gel material was molecularly imprinted with a group of neurotransmitters. Imprinted material is a sol-gel thin film that is spin coated on the surface of a glassy carbon electrode. Imprinted films were characterized electrochemically using cyclic voltammetry (CV) and the encapsulated molecules were extracted from the films and complementary molecular cavities are formed that enable their rebind. The films were tested in their corresponding template solutions for rebinding using square wave voltammetry (SWV). Computational approach for exploring the primary intermolecular forces between templates and hydrolyzed form of the precursor monomer, tetraethylorthosilicate (TEOS), were carried out using Hartree-Fock method (HF). Interaction energy values were computed for each adduct formed between a monomer and a template. Analysis of the optimized conformations of various adducts could explain the mode of interaction between the templates and the monomer units. We found that interaction via the amino group is the common mode among the studied compounds and the results are in good agreement with the electrochemical measurements.

Cross-Linked CoMoO4/rGO Nanosheets as Oxygen Reduction Catalyst

Directory of Open Access Journals (Sweden)

Jiaqi Fu

2017-12-01

Full Text Available Development of inexpensive and robust electrocatalysts towards oxygen reduction reaction (ORR is crucial for the cost-affordable manufacturing of metal-air batteries and fuel cells. Here we show that cross-linked CoMoO4 nanosheets and reduced graphene oxide (CoMoO4/rGO can be integrated in a hybrid material under one-pot hydrothermal conditions, yielding a composite material with promising catalytic activity for oxygen reduction reaction (ORR. Cyclic voltammetry (CV and linear sweep voltammetry (LSV were used to investigate the efficiency of the fabricated CoMoO4/rGO catalyst towards ORR in alkaline conditions. The CoMoO4/rGO composite revealed the main reduction peak and onset potential centered at 0.78 and 0.89 V (vs. RHE, respectively. This study shows that the CoMoO4/rGO composite is a highly promising catalyst for the ORR under alkaline conditions, and potential noble metal replacement cathode in fuel cells and metal-air batteries.

Electrodeposited nitrogen-doped graphene/carbon nanotubes nanocomposite as enhancer for simultaneous and sensitive voltammetric determination of caffeine and vanillin.

Science.gov (United States)

Jiang, Lin; Ding, Yaping; Jiang, Feng; Li, Li; Mo, Fan

2014-06-23

A nitrogen-doped graphene/carbon nanotubes (NGR-NCNTs) nanocomposite was employed into the study of the electrochemical sensor via electrodeposition for the first time. The morphology and structure of NGR-NCNTs nanocomposite were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. Meanwhile, the electrochemical performance of the glassy carbon electrode (GCE) modified with electrodeposited NGR-NCNTs (ENGR-NCNTs/GCE) towards caffeine (CAF) and vanillin (VAN) determination was demonstrated by cyclic voltammetry (CV) and square wave voltammetry (SWV). Under optimal condition, ENGR-NCNTs/GCE exhibited a wide linearity of 0.06-50 μM for CAF and 0.01-10 μM for VAN with detection limits of 0.02 μM and 3.3×10(-3) μM, respectively. Furthermore, the application of the proposed sensor in food products was proven to be practical and reliable. The desirable results show that the ENGR-NCNTs nanocomposite has promising potential in electrocatalytic biosensor application. Copyright © 2014 Elsevier B.V. All rights reserved.

On the Usage of Cyclic Voltammetry and Impedance Spectroscopy for Measuring the Concentration of Aqueous Solutions

Directory of Open Access Journals (Sweden)

Manuel Fiedler

2015-02-01

Full Text Available This article describes sensors for concentration measurement based on the electro- chemical properties of the liquid being measured. Herein two electrical methods, namely cyclic voltammetry and impedance spectroscopy, are being presented. The measurement can be performed quasi simultaneously using the same measurement medium. Further optimization of the combined methods is possible by adapting the geometric design of the electrode structure, the electrode material, the optional passivation and the electric coupling (galvanically or capacitively. In summary, by combining multiple sensory principles on a device it becomes possible to analyze mixtures of substances contained in a solution with respect to their composition.

Poly arginine-graphene quantum dots as a biocompatible and non-toxic nanocomposite: Layer-by-layer electrochemical preparation, characterization and non-invasive malondialdehyde sensory application in exhaled breath condensate

Energy Technology Data Exchange (ETDEWEB)

Hasanzadeh, Mohammad, E-mail: hasanzadehm@tbzmed.ac.ir [Drug Applied Research Center, Tabriz University of Medical Sciences, Tabriz 51664 (Iran, Islamic Republic of); Mokhtari, Fozieh [Pharmaceutical Analysis Research Center, Tabriz University of Medical Sciences, Tabriz (Iran, Islamic Republic of); Department of Biochemistry, Higher Education Institute of Rab-Rashid, Tabriz (Iran, Islamic Republic of); Shadjou, Nasrin [Department of Nanochemistry, Nano Technology Research Center, Urmia University, Urmia 57154 (Iran, Islamic Republic of); Department of Nano Technology, Faculty of Science, Urmia University, Urmia 57154 (Iran, Islamic Republic of); Eftekhari, Aziz [Department of Pharmacology and Toxicology, Faculty of Pharmacy, Tabriz University of Medical Sciences, 51664-14766 Tabriz (Iran, Islamic Republic of); Mokhtarzadeh, Ahad [Department of Biochemistry, Higher Education Institute of Rab-Rashid, Tabriz (Iran, Islamic Republic of); School of Medicine, Gonabad University of Medical Sciences, Gonabad (Iran, Islamic Republic of); Jouyban-Gharamaleki, Vahid [Department of Mechatronic Engineering, International Campus, University of Tabriz, Tabriz (Iran, Islamic Republic of); Mahboob, Soltanali [Department of Biochemistry, Higher Education Institute of Rab-Rashid, Tabriz (Iran, Islamic Republic of)

2017-06-01

This study reports on the electropolymerization of a low toxic and biocompatible polymer with entitle poly arginine-graphene quantum dots (PARG-GQDs) as a novel strategy for surface modification of glassy carbon (GC) surface and preparation a new interface for biomedical application. The fabrication of PARG-GQDs on GCE was performed using Layer-by-layer regime. Scanning electron microscopy (SEM) was confirmed dispersion of GQDs on the surface of PARG which lead to increase of surface coverage of PARG. The redox behavior of prepared sensor was then characterized by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CHA), square wave voltammetry (SWV), linear sweep voltammetry (LSV). The electroactivity of PARG-GQDs coating towards detection and determination of malondialdehyde (MDA) as one of the most common biomarkers of oxidative stress, was then studied. Then, application of prepared sensor for the detection of MDA in exhaled breath condensate (EBC) is described. Electrochemical based sensor shows the lower limit of quantification (LLOQ) were 0.329 nanomolar. This work is the first report on the integration of GQDs to poly amino acids. Further development can lead to monitoring of MDA or other exhaled breath biomarkers by GQDs functionalized poly amino acids in EBC using electrochemical methods. - Highlights: • Simple and one pot electropolymerization was used to preparation of Poly arginine-graphene quantum dots. • PARG-GQDs-GCE shows an excellent electroactivity towards malondialdehyde. • High sensitivity and efficiency is achieved through a simple method of modification. • MDA electrochemical sensor for a direct evaluation of oxidative stress in EBC media is possible.

Poly arginine-graphene quantum dots as a biocompatible and non-toxic nanocomposite: Layer-by-layer electrochemical preparation, characterization and non-invasive malondialdehyde sensory application in exhaled breath condensate

International Nuclear Information System (INIS)

Hasanzadeh, Mohammad; Mokhtari, Fozieh; Shadjou, Nasrin; Eftekhari, Aziz; Mokhtarzadeh, Ahad; Jouyban-Gharamaleki, Vahid; Mahboob, Soltanali

2017-01-01

This study reports on the electropolymerization of a low toxic and biocompatible polymer with entitle poly arginine-graphene quantum dots (PARG-GQDs) as a novel strategy for surface modification of glassy carbon (GC) surface and preparation a new interface for biomedical application. The fabrication of PARG-GQDs on GCE was performed using Layer-by-layer regime. Scanning electron microscopy (SEM) was confirmed dispersion of GQDs on the surface of PARG which lead to increase of surface coverage of PARG. The redox behavior of prepared sensor was then characterized by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CHA), square wave voltammetry (SWV), linear sweep voltammetry (LSV). The electroactivity of PARG-GQDs coating towards detection and determination of malondialdehyde (MDA) as one of the most common biomarkers of oxidative stress, was then studied. Then, application of prepared sensor for the detection of MDA in exhaled breath condensate (EBC) is described. Electrochemical based sensor shows the lower limit of quantification (LLOQ) were 0.329 nanomolar. This work is the first report on the integration of GQDs to poly amino acids. Further development can lead to monitoring of MDA or other exhaled breath biomarkers by GQDs functionalized poly amino acids in EBC using electrochemical methods. - Highlights: • Simple and one pot electropolymerization was used to preparation of Poly arginine-graphene quantum dots. • PARG-GQDs-GCE shows an excellent electroactivity towards malondialdehyde. • High sensitivity and efficiency is achieved through a simple method of modification. • MDA electrochemical sensor for a direct evaluation of oxidative stress in EBC media is possible.

Voltammetry for the charge transfer at two immiscible electrolyte solutions interface

International Nuclear Information System (INIS)

Kihara, S.; Suzuki, M.; Maeda, K.; Ogura, K.; Matsui, M.; Yoshida, Z.

1989-01-01

The voltammetry for the charge transfer (VCT) at the interface of immicible solutions is a very powerful method for understanding the dynamic features of the charge transfer because of its unmatched advantage that the transfer energy and the number of charges transferred can be measured simultaneously and in situ. In the present paper, several novel systems for electron transfer are outlined, and the following topics are discussed based on results obtained by the current scan polarography at the solution dropping electrode developed as a technique for VCT: the relation between the half-wave potential in VCT for ion transfer and the characteristics of the ion transferred; the relation between the half-wave potential in VCT for electron transfer and the electrochemical nature of a redox couple added in water and that added in organic solution; and the ion transfer through a liquid membrane promoted by electron transfer. Observations are presented and discussion is made on the characteristics of ion transfer polarograms, those of electron transfer polarograms, and ion transfer promoted by electron transfer at a liquid/membrane interface. (N.K.)

Capacitive behavior studies on electrical double layer capacitor using poly (vinyl alcohol)–lithium perchlorate based polymer electrolyte incorporated with TiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Lim, Chin-Shen; Teoh, K.H.; Liew, Chiam-Wen; Ramesh, S., E-mail: rameshtsubra@gmail.com

2014-01-15

Electric double layer capacitors (EDLCs) based on activated carbon electrodes and poly (vinyl alcohol)–lithium perchlorate (PVA–LiClO{sub 4})-nanosized titania (TiO{sub 2}) doped polymer electrolyte have been fabricated. Incorporation of TiO{sub 2} into PVA–LiClO{sub 4} system increases the ionic conductivity. The highest ionic conductivity of 1.3 × 10{sup −4} S cm{sup −1} is achieved at ambient temperature upon inclusion of 8 wt.% of TiO{sub 2}. Differential scanning calorimetry (DSC) analyses reveal that addition of TiO{sub 2} into polymer system increases the flexibility of polymer chain and favors the ion migration. Scanning electron microscopy (SEM) analyses display the surface morphology of the nanocomposite polymer electrolytes. The electrochemical stability window of composite polymer electrolyte is in the range of −2.3 V to 2.3 V as shown in cyclic voltammetry (CV) studies. The performance of EDLC is evaluated by electrochemical impedance spectroscopy (EIS), CV and galvanostatic charge–discharge technique. CV test discloses a nearly rectangular shape, which signifies the capacitive behavior of an ELDC. The EDLC containing composite polymer electrolyte gives higher specific capacitance value of 12.5 F g{sup −1} compared to non-composite polymer electrolyte with capacitance value of 3.0 F g{sup −1} in charge–discharge technique. The obtained specific capacitance of EDLC is in good agreement with each method used in this present work. Inclusion of filler into the polymer electrolyte enhances the electrochemical stability of EDLC. - Highlights: • PVA–LiClO{sub 4}–TiO{sub 2} possesses ionic conductivity value of 1.30 × 10{sup −4} S cm{sup −1}. • CV indicates the electrochemical stability window in the range of −2.3 V to 2.3 V. • The EDLC gives specific capacitance value of 12.5 F g{sup −1}.

Simulating Linear Sweep Voltammetry from First-Principles: Application to Electrochemical Oxidation of Water on Pt(111) and Pt₃Ni(111)

DEFF Research Database (Denmark)

Viswanathan, Venkatasubramanian; Hansen, Heine Anton; Rossmeisl, Jan

2012-01-01

Cyclic voltammetry is a fundamental experimental method for characterizing adsorbates on electrochemical surfaces. We present a model for the electrochemical solid–liquid interface, and we simulate the linear sweep voltammogram of the electrochemical oxidation of H2O on Pt(111) and Pt3Ni(111...

Penentuan Unsur Tanah Jarang Kelompok Sedang secara Voltammetri Pindai Linier Menggunakan Elektrode Grafit Pensil

Directory of Open Access Journals (Sweden)

Yeni Wahyuni Hartati

2016-01-01

Full Text Available Rare earth elements play an important role in a variety of applications, mostly for high-tech industries. But their presence in mineral jointly separation makes it difficult to determine the content of rare earths because each element has physical and chemical properties are almost identical. The purpose of this study is the use of a linear scan voltammetry method to study the electrochemical characteristics of the medium rare earth element group (Sm, Gd, Eu, Tb, as an alternative method of separation and analysis of rare earth elements. The electrode used is a graphite pencil electrodes without modification, with a variety of supporting electrolyte. The results obtained show some supporting electrolyte provides good reduction peak for gadolinium, compared to the peaks of the reduction potential of the single rare earth ions other. The potential range of the most well using pencil graphite electrode obtained at 0.50 V to -1.00 V. Analysis of single gadolinium provide linear regression equation in a concentration range of 4.0 to 10.0 mg/L by the equation Y = 0.9862 X + 0.828 with R2 = 0.9954. The limit of detection is determined from the linear regression obtained 0.72 mg / L.

Determination of Ascorbic Acid Content of Some Fruit Juices and Wine by Voltammetry Performed at Pt and Carbon Paste Electrodes

Directory of Open Access Journals (Sweden)

Aurel Pisoschi

2011-02-01

Full Text Available A method was developed for assessing ascorbic acid concentration in fruit juices and wine by differential pulse voltammetry. The oxidation peak for ascorbic acid occurs at about 530 mV (versus SCE on a Pt strip working electrode and at about 470 mV on a carbon paste working electrode. The influence of the operational parameters like the pulse amplitude and the pulse period on the analytical signal was investigated. The obtained calibration graph shows a linear dependence between the peak height and ascorbic acid concentration within the range 0.31-20 mM with a Pt working electrode, and within the range 0.07-20 mM with a carbon paste working electrode. The equation of the calibration graph was y = 21.839x + 35.726, r2 = 0.9940, when a Pt strip electrode was used (where y represents the value of the current intensity measured for the peak height, expressed as µA and x the analyte concentration, as mM. R.S.D. = 2.09%, n = 10, Cascorbic acid = 2.5 mM. The equation of the calibration graph was y = 3.4429x + 5.7334, r2 = 0.9971, when a carbon paste electrode was used (where y represents the value of intensity measured for the peak height, expressed as µA and x the analyte concentration, as mM. R.S.D. = 2.35%, n = 10, Cascorbic acid = 2.5 mM. The developed method was applied to ascorbic acid assessment in fruit juices and wine. The ascorbic acid content determined ranged between 6.83 mg/100 mL juice for soft drinks (Fanta Madness and 54.74 mg/100 mL for citrus (lemon juices obtained by squeezing fruit. Different ascorbic acid concentrations (from standard solutions were added to the analysed samples, the degree of recovery being comprised between 94.74 and 104.97%. The results of ascorbic acid assessment by differential pulse voltammetry were compared with those obtained by cyclic voltammetry. The results obtained by the two methods were in good agreement.

Characterisation of biosynthesised silver nanoparticles by scanning electrochemical microscopy (SECM) and voltammetry.

Science.gov (United States)

Battistel, Dario; Baldi, Franco; Gallo, Michele; Faleri, Claudia; Daniele, Salvatore

2015-01-01

Silver nanoparticles (AgNPs) were biosynthesised by a Klebsiella oxytoca strain BAS-10, which, during its growth, is known to produce a branched exopolysaccharide (EPS). Klebsiella oxytoca cultures, treated with AgNO3 and grown under either aerobic or anaerobic conditions, produced silver nanoparticles embedded in EPS (AgNPs-EPS) containing different amounts of Ag(0) and Ag(I) forms. The average size of the AgNPs-EPS was determined by transmission electron microscopy, while the relative abundance of Ag(0)- or Ag(I)-containing AgNPs-EPS was established by scanning electrochemical microscopy (SECM). Moreover, the release of silver(I) species from the various types of AgNPs-EPS was investigated by combining SECM with anodic stripping voltammetry. These measurements allowed obtaining information on the kinetic of silver ions release from AgNPs-EPS and their concentration profiles at the substrate/water interface. Copyright © 2014 Elsevier B.V. All rights reserved.

DETECTION OF MOTORCYCLISTS WITHOUT HELMET AND FINEPAYMENT USING OPEN CV

OpenAIRE

Stemy Simon, Divya Kumaran A.K.

2018-01-01

The helmet is the main safety equipment of motorcyclists, but many drivers do not use it. The main aim of this project is to construct an automatic detection of the motorcyclist without helmet from video using OpenCV library tools. If they are not wearing the helmet, the license plate of the motorcycle is focused automatically. By using Computer Vision technique we can detect and recognize the license plate number. We make the training set of different characters of different sizes. Based on ...

Building 3D Layer-by-Layer Graphene-Gold Nanoparticle Hybrid Architecture with Tunable Interlayer Distance

Science.gov (United States)

2014-06-26

saturated 0.1 M KOH electrolyte aqueous solution. Cyclic voltammetry (CV) and LSV curves were measured on a computer-controlled potentiostat (CHI 760C...analyzed by Raman spectroscopy, molecular simulation using Gaussian 09, X-ray photoelectron spectroscopy (XPS), and electron diffraction (ED). The typical... Raman features of GO are Figure 1. Synthesis of GO-Cys-GNR. Figure 2. Scheme of the representative layer-by-layer graphene−GNR hybrid architecture. The

Facile fabrication of novel silver-polypyrrole-multiwall carbon nanotubes nanocomposite for replacement of platinum in dye-sensitized solar cell

OpenAIRE

Shaista Rafique; Rehana Sharif; Imran Rashid; Sheeba Ghani

2016-01-01

This paper demonstrates the facile synthesis of high performance silver-polypyrrole-multiwall carbon nanotubes (Ag-PPy-FMWCNTS) nanocomposites via electrodeposition method on stainless steel substrate and its application as a low cost counter electrode (CE) for the precious platinum (Pt) free DSSC. The nanocomposites were characterized by variety of techniques such as Fourier transforms infrared (FTIR), X-ray diffraction, Scanning electron microscope (SEM), cyclic voltammetry (CV) and Four pr...

Effect of the Reduction Temperature of PdAg Nanoparticles during the Polyol Process in the Ethanol Electrooxidation Reaction

OpenAIRE

Carrera-Cerritos, R.; Salazar-Hernandez, C.; Galindo-Esquivel, I. R.; Fuentes-Ramirez, R.

2018-01-01

This work reports the effect of reduction temperature during the synthesis of PdAg catalysts through the polyol process and their evaluation in the ethanol electrooxidation reaction (EOR). The characterization was performed using Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD). The electrochemical evaluation for the ethanol electrooxidation reaction was implemented in alkaline medium using chronoamperometry (CA) and cyclic voltammetry (CV). An important effect of the reduct...

Microparticles of Ag/Ag_2S type core-shell as potentiometric sensor for detection of cyanide

International Nuclear Information System (INIS)

Olazo Quispe, Renzo; La Rosa-Toro Gomez, Adolfo

2014-01-01

The synthesis of silver microparticles with surface film of silver sulfide mixed with graphite powder has yielded an electrochemical sensor capable of detecting cyanide with good sensitivity. Silver and silver sulfide microparticles was characterized by cyclic voltammetry (CV), X-ray diffraction (XRD), X-ray Fluorescence (XRF), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectrometry X-ray (EDX). Potentiometric assays were performed to determine the selectivity coefficient of the sensor. (author)

A Geometric Correction Method of Plane Image Based on OpenCV

Directory of Open Access Journals (Sweden)

Li Xiaopeng

2014-02-01

Full Text Available Using OpenCV, a geometric correction method of plane image from single grid image in a state of unknown camera position is presented. The method can remove the perspective and lens distortions from an image. The method is simple and easy to implement, and the efficiency is high. Experiments indicate that this method has high precision, and can be used in some domains such as plane measurement.

C-V and G-V characteristics of ion-implanted MOS structures depending upon the geometrical structure of the implanted region

International Nuclear Information System (INIS)

Zohta, Y.

1977-01-01

It is found that the capacitance-voltage (C-V) and conductance-voltage (G-V) characteristics of MOS capacitors, into which ions of the opposite conductivity type are implanted, depend strongly upon the geometrical structure of the ion-implanted region. This phenomenon can be analyzed in terms of lateral current flow which connects an inversion layer formed in the ion-implanted region to a surrounding nonimplanted substrate. On the basis of this model, the C-V and G-V characteristics are calculated using a simple equivalent circuit, and general relationships inherent in this model are obtained. MOS capacitors with an ion-implanted layer of different geometries have been prepared to measure their C-V and G-V characteristics. Comparison of experimental measurements with theory substantiates the lateral current flow model

Amperometric sensing of anti-HIV drug zidovudine on Ag nanofilm-multiwalled carbon nanotubes modified glassy carbon electrode

Energy Technology Data Exchange (ETDEWEB)

Rafati, Amir Abbas, E-mail: aa_rafati@basu.ac.ir; Afraz, Ahmadreza

2014-06-01

The zidovudine (ZDV) is the first drug approved for the treatment of HIV virus infection. The detection and determination of this drug are very importance in human serum because of its undesirable effects. A new ZDV sensor was fabricated on the basis of nanocomposite of silver nanofilm (Ag-NF) and multiwalled carbon nanotubes (MWCNTs) immobilized on glassy carbon electrode (GCE). The modified electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), cyclic voltammetry (CV), and linear sweep voltammetry (LSV) techniques. Results showed that the electrodeposited silver has a nanofilm structure and further electrochemical studies showed that the prepared nanocomposite has high electrocatalytic activity and is appropriate for using in sensors. The amperometric technique under optimal conditions is used for the determination of ZDV ranging from 0.1 to 400 ppm (0.37 μM–1.5 mM) with a low detection limit of 0.04 ppm (0.15 μM) (S/N = 3) and good sensitivity. The prepared sensor possessed accurate and rapid response to ZDV and shows an average recovery of 98.6% in real samples. - Highlights: • New anti-HIV drug sensor was fabricated on the basis of nanomaterials composite. • The GCE modified by prepared hydrophilic MWCNT silver nanoparticles. • Silver nanofilm electrodeposited on MWCNT/GCE and characterized by SEM, EDX, CV and LSV • Response of electrode to ZDV was thoroughly investigated by electrochemical techniques.

Synthesis and (spectro)electrochemistry of mixed-valent diferrocenyl-dihydrothiopyran derivatives.

Science.gov (United States)

Kowalski, Konrad; Karpowicz, Rafał; Mlostoń, Grzegorz; Miesel, Dominique; Hildebrandt, Alexander; Lang, Heinrich; Czerwieniec, Rafał; Therrien, Bruno

2015-04-07

Three novel diferrocenyl complexes were prepared and characterised. 2,2-Diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran (1, sulphide) was accessible by the hetero-Diels-Alder reaction of diferrocenyl thioketone with 2,3-dimethyl-1,3-butadiene. Stepwise oxidation of 1 gave the respective oxides 2,2-diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran-1-oxide (2, sulfoxide) and 2,2-diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran-1,1-dioxide (3, sulfone), respectively. The molecular structures of 1 and 3 in the solid state were determined by single crystal X-ray crystallography. The oxidation of sulphide 1 to sulfone 3, plays only a minor role on the overall structure of the two compounds. Electrochemical (cyclic voltammetry (= CV), square wave voltammetry (= SWV)) and spectroelectrochemical (in situ UV-Vis/NIR spectroscopy) studies were carried out. The CV and SWV measurements showed that an increase of the sulphur atom oxidation from -2 in 1 to +2 in 3 causes an anodic shift of the ferrocenyl-based oxidation potentials of about 100 mV. The electrochemical oxidation of 1-3 generates mixed-valent cations 1(+)-3(+). These monooxidised species display low-energy electronic absorption bands between 1000 and 3000 nm assigned to IVCT (= Inter-Valence Charge Transfer) electronic transitions. Accordingly, the mixed-valent cations 1(+)-3(+) are classified as weakly coupled class II systems according to Robin and Day.

Studies on the impact of fluoride toxicity on germination and seedling growth of gram seed (Cicer arietinum L. cv. Anuradha

Directory of Open Access Journals (Sweden)

Mondal N.K.

2012-04-01

Full Text Available The influence of 0, 0.1 mM, 0.5 mM, 1.0 mM, 4.0 mM, 8.0 mM fluoride (F concentration on seed germination, seedling growth of gram seeds (cv. Anuradha was studied under laboratory condition. At the end of 15 days of treatment, significant reduction in root length, shoot length, dry weight, fresh weight, % of germination, protein content, catalase activity, tolerance index, vigour index, germination rate, germination relative index, mean daily germination were observed at increasing fluoride concentration. Total soluble sugar content, proline content, peroxidase activity, ascorbic acid oxidase activity, % DFC, % phytotoxicity of root and shoot increased along with gradual increment of F concentration. 4.0 mM F concentration was found to be most sensitive for gram seeds. At 8.0 mM F concentration germination occurred but plants were totally dried after completion of treatment period.

Modified glassy carbon electrodes based on carbon nanostructures for ultrasensitive electrochemical determination of furazolidone

Energy Technology Data Exchange (ETDEWEB)

Shahrokhian, Saeed, E-mail: shahrokhian@sharif.edu [Department of Chemistry, Sharif University of Technology, Tehran 11155-9516 (Iran, Islamic Republic of); Institute for Nanoscience and Nanotechnology, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Naderi, Leila [Department of Chemistry, Sharif University of Technology, Tehran 11155-9516 (Iran, Islamic Republic of); Ghalkhani, Masoumeh [Department of Chemistry, Faculty of Science, Shahid Rajaee Teacher Training University, Lavizan, Tehran (Iran, Islamic Republic of); Institute for advanced technology, Shahid Rajaee Teacher Training University, Lavizan, Tehran, 16788 (Iran, Islamic Republic of)

2016-04-01

The electrochemical behavior of Furazolidone (Fu) was investigated on the surface of the glassy carbon electrode modified with different carbon nanomaterials, including carbon nanotubes (CNTs), carbon nanoparticles (CNPs), nanodiamond-graphite (NDG), graphene oxide (GO), reduced graphene oxide (RGO) and RGO-CNT hybrids (various ratios) using linear sweep voltammetry (LSV). The results of voltammetric studies exhibited a considerable increase in the cathodic peak current of Fu at the RGO modified GCE, compared to other modified electrodes and also bare GCE. The surface morphology and nature of the RGO film was thoroughly characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques. The modified electrode showed two linear dynamic ranges of 0.001–2.0 μM and 2.0–10.0 μM with a detection limit of 0.3 nM for the voltammetric determination of Fu. This sensor was used successfully for Fu determination in pharmaceutical and clinical preparations. - Highlights: • The electrochemical behavior of Furazolidone (Fu) was investigated on the surface of the modified electrode with different carbon nanomaterials by Linear sweep voltammetry. • Two linear dynamic ranges and a low detection limit were obtained. • The modified electrode was applied for the detection of Fu in pharmaceutical and clinical preparations.

Enzymatic biosensor based on entrapment of d-amino acid oxidase on gold nanofilm/MWCNTs nanocomposite modified glassy carbon electrode by sol-gel network: Analytical applications for d-alanine in human serum.

Science.gov (United States)

Shoja, Yalda; Rafati, Amir Abbas; Ghodsi, Javad

2017-05-01

Sensing and determination of d-alanine is studied by using an enzymatic biosensor which was constructed on the basis of d-amino acid oxidase (DAAO) immobilization by sol-gel film onto glassy carbon electrode surface modified with nanocomposite of gold nanofilm (Au-NF) and multiwalled carbon nanotubes (MWCNTs). The Au-NF/MWCNT nanocomposite was prepared by applying the potentiostatic technique for electrodeposition of Au-NF on the MWCNT immobilized on glassy carbon electrode surface. The modified electrode is investigated by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), linear sweep voltammetry (LSV) and cyclic voltammetry(CV) techniques. The linear sweep voltammetry was used for determination of d-alanine and the results showed an excellent linear relationship between biosensor response and d-alanine concentration ranging from 0.25μM to 4.5μM with correction coefficient of 0.999 (n=20). Detection limit for the fabricated sensor was calculated about 20nM (for S/N=3) and sensitivity was about 56.1μAμM -1 cm -2 . The developed biosensor exhibited rapid and accurate response to d-alanine, a good stability (4 weeks) and an average recovery of 98.9% in human serum samples. Copyright © 2017 Elsevier Inc. All rights reserved.

Simultaneous determination of adenine guanine and thymine at multi-walled carbon nanotubes incorporated with poly(new fuchsin) composite film

Energy Technology Data Exchange (ETDEWEB)

Tang Ching; Yogeswaran, Umasankar [Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, No.1, Section 3, Chung-Hsiao East Road, Taipei 106, Taiwan (China); Chen, S.-M. [Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, No.1, Section 3, Chung-Hsiao East Road, Taipei 106, Taiwan (China)], E-mail: smchen78@ms15.hinet.net

2009-03-16

A composite film (MWCNTs-PNF) which contains multi-walled carbon nanotubes (MWCNTs) along with the incorporation of poly(new fuchsin) (PNF) has been synthesized on glassy carbon electrode (GCE), gold (Au) and indium tin oxide (ITO) by potentiostatic methods. The presence of MWCNTs in the composite film enhances surface coverage concentration ({gamma}) of PNF to {approx}176.5%, and increases the electron transfer rate constant (k{sub s}) to {approx}346%. The composite film also exhibits promising enhanced electrocatalytic activity towards the mixture of biochemical compounds such as adenine (AD), guanine (GU) and thymine (THY). The surface morphology of the composite film deposited on ITO has been studied using scanning electron microscopy and atomic force microscopy. These two techniques reveal that the PNF incorporated on MWCNTs. Electrochemical quartz crystal microbalance study reveals the enhancement in the functional properties of MWCNTs and PNF. The electrocatalytic responses of analytes at MWCNTs and MWCNTs-PNF films were measured using both cyclic voltammetry (CV) and differential pulse voltammetry (DPV). From electrocatalysis studies, well separated voltammetric peaks have been obtained at the composite film for AD, GU and THY, with the peak separation of 320.3 and 132.7 mV between GU-AD and AD-THY respectively. The sensitivity of the composite film towards AD, GU and THY in DPV technique is 218.18, 12.62 and 78.22 mA M{sup -1} cm{sup -2} respectively, which are higher than MWCNTs film. Further, electroanalytical studies of AD, GU and THY present in single-strand deoxyribonucleic acid (ssDNA) have been carried out using semi-derivative CV and DPV.

Determination of Silver(I by Differential Pulse Voltammetry Using a Glassy Carbon Electrode Modified with Synthesized N-(2-Aminoethyl-4,4'-Bipyridine

Directory of Open Access Journals (Sweden)

Gabriel Lucian Radu

2010-12-01

Full Text Available A new modified glassy carbon electrode (GCE based on a synthesized N-(2-aminoethyl-4,4'-bipyridine (ABP was developed for the determination of Ag(I by differential pulse voltammetry (DPV. ABP was covalently immobilized on GC electrodes surface using 4-nitrobenzendiazonium (4-NBD and glutaraldehyde (GA. The Ag(I ions were preconcentrated by chemical interaction with bipyridine under a negative potential (−0.6 V; then the reduced ions were oxidized by differential pulse voltammetry and a peak was observed at 0.34 V. The calibration curve was linear in the concentration range from 0.05 μM to 1 μM Ag(I with a detection limit of 0.025 μM and RSD = 3.6%, for 0.4 μM Ag(I. The presence of several common ions in more than 125-fold excess had no effect on the determination of Ag(I. The developed sensor was applied to the determination of Ag(I in water samples using a standard addition method.

Modification of Screen Printed Carbon Electrode (SPCE with Fe3O4 for the Determination of Nitrite (NO2- in Squarewave Voltammetry

Directory of Open Access Journals (Sweden)

Erica Marista Rosida

2017-11-01

Full Text Available Nitrite is one of the food preservatives that the government permits, but on the use of over limits can cause endanger health, so it is necessary to control the content of nitrite in the food. Modification of electrodes on a screen printed carbon electrode (SPCE with Fe3O4 has been successfully done for determination of nitrite. Modification of the electrode has been done by electrodeposition with cyclic voltammetry. Electrodeposition successfully performed with an electrolyte solution of FeCl3 in ethanol. Selection of the optimum drying temperature modified electrode obtained based on the respond of the solution of nitrite in Britton Robinson buffer pH 8. The result of the modification electrode used for the determination of nitrite with squarewave voltammetry method. Reaction between Fe3+ with nitrite a basis for determining nitric indirectly measured so that the peak current is the peak current of Fe3+ of about 0,55 V vs Ag/AgCl. The results showed nitrite measurements with this method has a detection limit of 1.3 x 10-8 M.

Information Hiding In Digital Video Using DCT, DWT and CvT

Science.gov (United States)

Abed Shukur, Wisam; Najah Abdullah, Wathiq; Kareem Qurban, Luheb

2018-05-01

The type of video that used in this proposed hiding a secret information technique is .AVI; the proposed technique of a data hiding to embed a secret information into video frames by using Discrete Cosine Transform (DCT), Discrete Wavelet Transform (DWT) and Curvelet Transform (CvT). An individual pixel consists of three color components (RGB), the secret information is embedded in Red (R) color channel. On the receiver side, the secret information is extracted from received video. After extracting secret information, robustness of proposed hiding a secret information technique is measured and obtained by computing the degradation of the extracted secret information by comparing it with the original secret information via calculating the Normalized cross Correlation (NC). The experiments shows the error ratio of the proposed technique is (8%) while accuracy ratio is (92%) when the Curvelet Transform (CvT) is used, but compared with Discrete Wavelet Transform (DWT) and Discrete Cosine Transform (DCT), the error rates are 11% and 14% respectively, while the accuracy ratios are (89%) and (86%) respectively. So, the experiments shows the Poisson noise gives better results than other types of noises, while the speckle noise gives worst results compared with other types of noises. The proposed technique has been established by using MATLAB R2016a programming language.

Efeito de substratos na aclimatização de mudas micropropagadas de abacaxizeiro cv. Pérola Acclimatization of micropropagated pineapple plants cv. "Pérola": substrata effect

Directory of Open Access Journals (Sweden)

Maria Aparecida Moreira

2006-10-01

Full Text Available Objetivou-se com este trabalho verificar o efeito da matéria orgânica como componente de substratos para mudas micropropagadas de abacaxizeiro cv. Pérola em fase de aclimatização. Mudas micropropagadas de abacaxizeiro cv. Pérola, selecionadas de acordo com o peso (aproximadamente 2 g, foram plantadas em bandejas de isopor de 72 células de 120 cm³ contendo proporções de substratos com terra, esterco bovino, Plantmax e matéria orgânica. O delineamento estatístico utilizado foi o inteiramente casualizado com 4 repetições e 3 plantas por parcela. As avaliações foram feitas 90 dias após o plantio, quando se avaliou: altura da planta, comprimento de raiz, peso de matéria fresca de raiz e parte aérea, peso de matéria seca de raiz e parte aérea e número de folhas. Com os resultados obtidos, conclui-se que a matéria orgânica tem efeito significativo no desenvolvimento das mudas. Com o substrato contendo terra, esterco e Plantmax foi obtido o melhor desenvolvimento das raízes e parte aérea.The objective of this work was to evaluate the effect of the organic matter as component of substrata for micropropagated plants of pineapple cv. Pérola in the acclimatization phase. Micropropagated plants were selected according to the weight (approximately 2g and planted in trays with 72 cels of 120 cm³, containing substrata made of soil, bovine manure, Plantmax and organic matter at different proportions. At 90 days after planting, the following parameters were evaluated: height of the plant, root length, weight of fresh matter of root and aerial part, dry matter weight of root and aerial part and number of leaves. The obtained results allowed to conclude that the organic matter has significant effect on the development of the seedlings. The best results for the development of the roots and aerial part were obtained with substratum containing soil, manure and Plantmax.