WorldWideScience

Sample records for voltages display reproducible

  1. Reproducible and controllable induction voltage adder for scaled beam experiments

    Science.gov (United States)

    Sakai, Yasuo; Nakajima, Mitsuo; Horioka, Kazuhiko

    2016-08-01

    A reproducible and controllable induction adder was developed using solid-state switching devices and Finemet cores for scaled beam compression experiments. A gate controlled MOSFET circuit was developed for the controllable voltage driver. The MOSFET circuit drove the induction adder at low magnetization levels of the cores which enabled us to form reproducible modulation voltages with jitter less than 0.3 ns. Preliminary beam compression experiments indicated that the induction adder can improve the reproducibility of modulation voltages and advance the beam physics experiments.

  2. Optical layout of autostereoscopic display that simultaneously reproduces two views each with full-screen resolution.

    Science.gov (United States)

    Ezhov, Vasily

    2014-12-20

    Traditional 60 Hz autostereoscopic displays with static amplitude parallax barriers have a half of full-screen resolution in each of the two displayed views of a 3D scene. The known 120 Hz autostereoscopic displays with dynamic amplitude parallax barriers have full-screen resolution but are characterized by essential light intensity losses and crosstalk in each of displayed views. The recently proposed autostereoscopic displays with simultaneous reproducing two image elements in each display pixel and with a polarization parallax barrier have full-screen resolution. However, the existing optical layout of these displays does not provide optimum operating conditions for the polarization parallax barrier creating a tendency to degrade the contrast and color characteristics. This paper presents a new optical layout characterized by the rearrangement of optical components of the previous layout. In this approach, the highlighted problems are addressed without any trade-offs. Through informal subjective visual tests, this proposal is found to provide good contrast and good color balance in the output image.

  3. Low voltage transflective blue-phase liquid crystal display with a non-uniform etching substrate

    Science.gov (United States)

    Wang, Jian; Mao, Jiang-Lin; Fan, Hao-Xiang; Wang, Qiong-Hua

    2016-09-01

    A transflective polymer-stabilized blue-phase liquid crystal display (BP-LCD) with a non-uniform etching substrate is proposed. In-plane switching (IPS) electrodes on the bottom substrate are put on the different gaps, and the bottom substrate between the electrodes is etched into different depths in transmissive (T) and reflective (R) regions. This structure can balance the optical phase retardation in the two regions and is helpful to achieve well-matched voltag-dependent transmittance and reflectance curves. This transflective display has high optical efficiency, a wide viewing angle, and low operating voltage (approximately 6 V). Project supported by the National Natural Science Foundation of China (Grant Nos. 61535007 and 61320106015) and the National Basic Research Program of China (Grant No. 2013CB328802).

  4. Low-Voltage, Low-Power, Organic Light-Emitting Transistors for Active Matrix Displays

    Science.gov (United States)

    McCarthy, M. A.; Liu, B.; Donoghue, E. P.; Kravchenko, I.; Kim, D. Y.; So, F.; Rinzler, A. G.

    2011-04-01

    Intrinsic nonuniformity in the polycrystalline-silicon backplane transistors of active matrix organic light-emitting diode displays severely limits display size. Organic semiconductors might provide an alternative, but their mobility remains too low to be useful in the conventional thin-film transistor design. Here we demonstrate an organic channel light-emitting transistor operating at low voltage, with low power dissipation, and high aperture ratio, in the three primary colors. The high level of performance is enabled by a single-wall carbon nanotube network source electrode that permits integration of the drive transistor and the light emitter into an efficient single stacked device. The performance demonstrated is comparable to that of polycrystalline-silicon backplane transistor-driven display pixels.

  5. Breakdown Voltage Research of Penning Gas Mixture in Plasma Display Panel

    Institute of Scientific and Technical Information of China (English)

    Guo Bingang; Liu Chunliang; Song Zhongxiao; Fan Yufeng; Xia Xing; Liu Liu; Fan Duowang

    2005-01-01

    Paschen law and equations, which ignore the influence of the Penning ionization on the electron ionization coefficient (α), are always used as the approximation of the breakdown voltage criterion of the Penning gas mixture in current researches of discharge characteristics of the plasma display panel (PDP). It is doubtful that whether their results match the facts. Based on the Townsend gas self-sustaining discharge condition and the chemical kinetics analysis of the Penning gas mixture discharging in PDP, the empirical equation to describe the breakdown of the Penning gas mixture is given. It is used to calculate the breakdown voltage curves of Ne-Xe/MgO and Ne-Ar/MgO in a testing macroscopic discharge cell of AC-PDP. The effective secondary electron emission coefficients (γeff) of the MgO protective layers are derived by comparing the breakdown voltage curves obtained from the empirical equation with the experimental data of breakdown voltages. In comparison with the results calculated by the Paschen law and the equation which ignore the influence of the Penning ionization on α , the results calculated by the empirical equation have better conformity with experimental data. The empirical equation characterizes the breakdown of the Penning gas mixture in PDP effectively, and gives a convenient way to study its breakdown characteristics and the secondary electron emission behaviors.

  6. Voltage Drop Compensation Method for Active Matrix Organic Light Emitting Diode Displays

    Science.gov (United States)

    Choi, Sang-moo; Ryu, Do-hyung; Kim, Keum-nam; Choi, Jae-beom; Kim, Byung-hee; Berkeley, Brian

    2011-03-01

    In this paper, the conventional voltage drop compensation methods are reviewed and the novel design and driving scheme, the advanced power de-coupled (aPDC) driving method, is proposed to effectively compensate the voltage IR drop of active matrix light emitting diode (AMOLED) displays. The advanced PDC driving scheme can be applied to general AMOLED pixel circuits that have been developed with only minor modification or without requiring modification in pixel circuit. A 14-in. AMOLED panel with the aPDC driving scheme was fabricated. Long range uniformity (LRU) of the 14-in. AMOLED panel was improved from 43% without the aPDC driving scheme, to over 87% at the same brightness by using the scheme and the layout complexity of the panel with new design scheme is less than that of the panel with the conventional design scheme.

  7. Solution Processable Electrochemiluminescent Ion Gels for Flexible, Low Voltage, Emissive Displays on Plastic

    Science.gov (United States)

    Moon, Hong Chul; Lodge, Timothy P.; Frisbie, C. Daniel

    2014-03-01

    We have expanded the functionality of ion gels and successfully demonstrated low voltage, flexible electrochemiluminescent (ECL) devices using patterned ECL gels. An ECL device composed of only an emissive gel and two electrodes was fabricated on an ITO-coated substrate by solution casting the ECL gel and brush-painting the top silver electrode. The device turned on at an AC voltage as low as 2.6 V (-1.3 V ~ +1.3 V) and showed a relatively rapid response (sub-ms). Also, we varied the mechanical properties of the ECL gel simply by substituting polystyrene-block-poly(methyl methacrylate)-block-polystyrene (SMS) with commercially available poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-co-HFP)), enabling the fabrication of flexible ECL devices on any target substrate by the ``cut-and-stick'' strategy. This simple, rubbery ECL gel should be attractive for flexible electronics applications such as displays on packaging.

  8. Wall-shaped electrodes for reducing the operation voltage of polymer-stabilized blue phase liquid crystal displays

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Miyoung; Kim, Min Su; Kang, Byeong Gyun; Kim, Mi-Kyung; Yoon, Sukin; Lee, Seung Hee [Polymer BIN Fusion Research Center, Department of Polymer Nano-Science and Technology, Chonbuk National University, Chonju, Chonbuk 561-756 (Korea, Republic of); Ge Zhibing; Rao Linghui; Gauza, Sebastian; Wu, Shin-Tson, E-mail: lsh1@chonbuk.ac.k, E-mail: swu@creol.ucf.ed [College of Optics and Photonics, University of Central Florida, Orlando, FL 32816 (United States)

    2009-12-07

    Polymer-stabilized blue phase liquid crystal displays based on the Kerr effect are emerging due to their submillisecond response time, wide view and simple fabrication process. However, the conventional in-plane switching device exhibits a relatively high operating voltage because the electric fields are restricted in the vicinity of the electrode surface. To overcome this technical barrier, we propose a partitioned wall-shaped electrode configuration so that the induced birefringence is uniform between electrodes throughout the entire cell gap. Consequently, the operating voltage is reduced by {approx} 2.8x with two transistors. The responsible physical mechanisms are explained.

  9. Electrostatic-Force-Assisted Dispensing Printing of Electrochromic Gels for Low-Voltage Displays.

    Science.gov (United States)

    Kim, Keon-Woo; Oh, Hwan; Bae, Jae Hyun; Kim, Haekyoung; Moon, Hong Chul; Kim, Se Hyun

    2017-06-07

    In this study, low-voltage, printed, ion gel-based electrochromic devices (ECDs) were successfully fabricated. While conventional dispensing printing provides irregularly printed electrochromic (EC) gels, we improved the adhesion between the printed gel and the substrate by applying an external voltage. This is called electrostatic-force-assisted dispensing printing. As a result, we obtained well-defined, printed, EC gels on substrates such as indium tin oxide-coated glass. We fabricated a gel-based ECD by simply sandwiching the printed EC gel between two transparent electrodes. The resulting ECD, which required a low coloration voltage (∼0.6 V), exhibited a high coloration efficiency (η) of 161 cm(2)/C and a large transmittance contrast (∼82%) between the bleached and colored states at -0.7 V. In addition, electrostatic-force-assisted dispensing printing was utilized to fabricate directly patterned ECDs.

  10. Quantum entanglement in the voltage dependent sodium channel can reproduce the salient features of neuronal action potential initiation

    CERN Document Server

    Summhammer, Johann

    2007-01-01

    We investigate the effects of a quantum entanglement regime within an ion conducting molecule (ion channel) of the neuronal plasma membrane on the onset dynamics of propagating nerve pulses (action potentials). In particular, we model the onset parameters of the sodium current in the Hodgkin Huxley equation as three similar but independent probabilistic mechanisms which become quantum entangled. The underlying physics is general and can involve entanglement between various degrees of freedom underlaying ion transition states or 'gating states' during conduction, e.g. Na$^+$ ions in different channel locations, or different 'affinity' states of ions with atoms lining the sub-regions of the channel protein ('filter-states'). We find that the 'quantum corrected' Hodgkin Huxley equation incorporating entangled systems states can reproduce action potential pulses with the critical onset dynamics observed recently in neocortical neurons in vivo by Naundorf et al. [Nature {\\bf 440}, 1060 (20 April 2006)]. Interestin...

  11. Solution-processable electrochemiluminescent ion gels for flexible, low-voltage, emissive displays on plastic.

    Science.gov (United States)

    Moon, Hong Chul; Lodge, Timothy P; Frisbie, C Daniel

    2014-03-05

    Ion gels comprising ABA triblock copolymers and ionic liquids have received much attention as functional materials in numerous applications, especially as gate dielectrics in organic transistors. Here we have expanded the functionality of ion gels by demonstrating low-voltage, flexible electrochemiluminescent (ECL) devices using patterned ion gels containing redox-active luminophores. The ECL devices consisted only of a 30 μm thick emissive gel and two electrodes and were fabricated on indium tin oxide-coated substrates (e.g., polyester) simply by solution-casting the ECL gel and brush-painting a top Ag electrode. The triblock copolymer employed in the gel was polystyrene-block-poly(methyl methacrylate)-block-polystyrene, where the solvophobic polystyrene end blocks associate into micellar cross-links in the versatile ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMI][TFSI]). An ECL gel containing ~6.25 wt % Ru(bpy)3Cl2 (relative to [EMI][TFSI]) as the luminophore turned on at an AC peak-to-peak voltage as low as 2.6 V (i.e., -1.3 to +1.3 V) and showed a relatively rapid response (sub-ms). The wavelength of maximum emission was 610 nm (red-orange). With the use of an iridium(III) complex, Ir(diFppy)2(bpy)PF6 [diFppy = 2-(2',4'-difluorophenyl)pyridine; bpy = 2,2'-bipyridyl], the emitting color was tuned to a maximum wavelength of 540 nm (green). Moreover, when a blended luminophore system containing a 60:40 mixture of Ru(bpy)3(2+) and Ir(diFppy)2(bpy)(+) was used in the emissive layer, the luminance of red-orange-colored light was enhanced by a factor of 2, which is explained by the generation of the additional excited state Ru(bpy)3(2+)* by a coreactant pathway with Ir(diFppy)2(bpy)(+)* in addition to the usual annihilation pathway. This is the first time that enhanced ECL has been achieved in ion gels (or ionic liquids) using a coreactant. Overall, the results indicate that ECL ion gels are attractive multifunctional materials for

  12. Threshold-Voltage-Shift Compensation and Suppression Method Using Hydrogenated Amorphous Silicon Thin-Film Transistors for Large Active Matrix Organic Light-Emitting Diode Displays

    Science.gov (United States)

    Oh, Kyonghwan; Kwon, Oh-Kyong

    2012-03-01

    A threshold-voltage-shift compensation and suppression method for active matrix organic light-emitting diode (AMOLED) displays fabricated using a hydrogenated amorphous silicon thin-film transistor (TFT) backplane is proposed. The proposed method compensates for the threshold voltage variation of TFTs due to different threshold voltage shifts during emission time and extends the lifetime of the AMOLED panel. Measurement results show that the error range of emission current is from -1.1 to +1.7% when the threshold voltage of TFTs varies from 1.2 to 3.0 V.

  13. The voltage-gated potassium channel subfamily KQT member 4 (KCNQ4) displays parallel evolution in echolocating bats.

    Science.gov (United States)

    Liu, Yang; Han, Naijian; Franchini, Lucía F; Xu, Huihui; Pisciottano, Francisco; Elgoyhen, Ana Belén; Rajan, Koilmani Emmanuvel; Zhang, Shuyi

    2012-05-01

    Bats are the only mammals that use highly developed laryngeal echolocation, a sensory mechanism based on the ability to emit laryngeal sounds and interpret the returning echoes to identify objects. Although this capability allows bats to orientate and hunt in complete darkness, endowing them with great survival advantages, the genetic bases underlying the evolution of bat echolocation are still largely unknown. Echolocation requires high-frequency hearing that in mammals is largely dependent on somatic electromotility of outer hair cells. Then, understanding the molecular evolution of outer hair cell genes might help to unravel the evolutionary history of echolocation. In this work, we analyzed the molecular evolution of two key outer hair cell genes: the voltage-gated potassium channel gene KCNQ4 and CHRNA10, the gene encoding the α10 nicotinic acetylcholine receptor subunit. We reconstructed the phylogeny of bats based on KCNQ4 and CHRNA10 protein and nucleotide sequences. A phylogenetic tree built using KCNQ4 amino acid sequences showed that two paraphyletic clades of laryngeal echolocating bats grouped together, with eight shared substitutions among particular lineages. In addition, our analyses indicated that two of these parallel substitutions, M388I and P406S, were probably fixed under positive selection and could have had a strong functional impact on KCNQ4. Moreover, our results indicated that KCNQ4 evolved under positive selection in the ancestral lineage leading to mammals, suggesting that this gene might have been important for the evolution of mammalian hearing. On the other hand, we found that CHRNA10, a gene that evolved adaptively in the mammalian lineage, was under strong purifying selection in bats. Thus, the CHRNA10 amino acid tree did not show echolocating bat monophyly and reproduced the bat species tree. These results suggest that only a subset of hearing genes could underlie the evolution of echolocation. The present work continues to

  14. Vortex beam generation and other advanced optics experiments reproduced with a twisted-nematic liquid-crystal display with limited phase modulation

    Science.gov (United States)

    Cofré, Aaron; García-Martínez, Pascuala; Vargas, Asticio; Moreno, Ignacio

    2017-01-01

    In this work we propose the use of twisted-nematic liquid-crystal spatial light modulators (TN-LC-SLM) as a useful tool for training students in the manipulation of light beams with phase-only masks. In particular, we focus the work on the realization of phase-only gratings and phase-only spiral phases for the generation of vortex beams, beams carrying orbital angular momentum (OAM). Despite the extensive activity in this field, its experimental implementation for educational purposes is limited because it requires the use of very expensive high-resolution liquid-crystal on silicon (LCOS) SLMs. Here, we show that a low-cost experimental implementation can be done with older TNLC technology. However, these devices, intended for display applications, exhibit rather limited optical phase modulation properties in comparison with modern LCOS devices, such as a very low range of phase modulation and a general coupled intensity modulation. However, we show that a precise characterization of their retardance parameters permits their operation in useful modulation configurations. As examples, we include one continuous phase-only configuration useful for reproducing the optimal triplicator phase grating, and a binary π-phase modulation. We include experiments with the realization of different phase diffraction gratings, and their combination with spiral phase patterns and lens functions to generate a variety of vortex beams.

  15. Reduced operating voltage and grey-to-grey response time in a vertically aligned liquid crystal display using a mixture of two polyimide alignment materials

    Science.gov (United States)

    Lee, Ji-Hoon; Choi, Young Eun; Lee, Jun Hee; Lee, Byeong Hoon; Song, Won Il; Jeong, Kwang-Un; Lee, Gi-Dong; Lee, Seung Hee

    2013-12-01

    We proposed a method to reduce the operating voltage and the grey-to-grey switching time of a vertically aligned liquid crystal display using a mixture of planar and vertical polyimide alignment materials. The surface anchoring energy of the two-polyimide mixture was smaller than that of the pure vertical polyimide and consequently, liquid crystal molecules were easily switched to a planar state with an electric field, resulting in a greater maximum retardation than that of the pure polyimide at the same applied voltage. Rising time was also significantly reduced due to the suppressed optical bouncing effect in the mixed planar polyimide, and the decaying time showed negligible change. With the proposed approach, we can reduce the cell gap to obtain half-wave retardation allowing for faster response time while keeping a low operating voltage.

  16. Transparent Pixel Circuit with Threshold Voltage Compensation Using ZnO Thin-Film Transistors for Active-Matrix Organic Light Emitting Diode Displays

    Science.gov (United States)

    Yang, Ik-Seok; Kwon, Oh-Kyong

    2009-03-01

    A transparent pixel circuit with a threshold voltage compensating scheme using ZnO thin-film transistors (TFTs) for active-matrix organic light emitting diode (AMOLED) displays is proposed. This circuit consists of five n-type ZnO TFTs and two capacitors and can compensate for the threshold voltage variation of ZnO TFTs in real time. From simulation results, the maximum deviation of the emission current of the pixel circuit with a threshold voltage variation of ±1 V is determined to be less than 10 nA. From measurement results, it is verified that the maximum deviation of measured emission currents with measurement position in a glass substrate is less than 15 nA in a higher current range, and the deviation of emission current with time is less than 3%.

  17. Reproducibility blues.

    Science.gov (United States)

    Pulverer, Bernd

    2015-11-12

    Research findings advance science only if they are significant, reliable and reproducible. Scientists and journals must publish robust data in a way that renders it optimally reproducible. Reproducibility has to be incentivized and supported by the research infrastructure but without dampening innovation.

  18. Improvement in Brightness Uniformity by Compensating for the Threshold Voltages of Both the Driving Thin-Film Transistor and the Organic Light-Emitting Diode for Active-Matrix Organic Light-Emitting Diode Displays

    Science.gov (United States)

    Fan, Ching-Lin; Lai, Hui-Lung; Chang, Jyu-Yu

    2010-05-01

    In this paper, we propose a novel pixel design and driving method for active-matrix organic light-emitting diode (AM-OLED) displays using low-temperature polycrystalline silicon thin-film transistors (LTPS-TFTs). The proposed threshold voltage compensation circuit, which comprised five transistors and two capacitors, has been verified to supply uniform output current by simulation work using the automatic integrated circuit modeling simulation program with integrated circuit emphasis (AIM-SPICE) simulator. The driving scheme of this voltage programming method includes four periods: precharging, compensation, data input, and emission. The simulated results demonstrate excellent properties such as low error rate of OLED anode voltage variation (<1%) and high output current. The proposed pixel circuit shows high immunity to the threshold voltage deviation characteristics of both the driving poly-Si TFT and the OLED.

  19. Elusive reproducibility.

    Science.gov (United States)

    Gori, Gio Batta

    2014-08-01

    Reproducibility remains a mirage for many biomedical studies because inherent experimental uncertainties generate idiosyncratic outcomes. The authentication and error rates of primary empirical data are often elusive, while multifactorial confounders beset experimental setups. Substantive methodological remedies are difficult to conceive, signifying that many biomedical studies yield more or less plausible results, depending on the attending uncertainties. Real life applications of those results remain problematic, with important exceptions for counterfactual field validations of strong experimental signals, notably for some vaccines and drugs, and for certain safety and occupational measures. It is argued that industrial, commercial and public policies and regulations could not ethically rely on unreliable biomedical results; rather, they should be rationally grounded on transparent cost-benefit tradeoffs.

  20. Pixel structures to compensate nonuniform threshold voltage and mobility of polycrystalline silicon thin-film transistors using subthreshold current for large-size active matrix organic light-emitting diode displays

    Science.gov (United States)

    Na, Jun-Seok; Kwon, Oh-Kyong

    2014-01-01

    We propose pixel structures for large-size and high-resolution active matrix organic light-emitting diode (AMOLED) displays using a polycrystalline silicon (poly-Si) thin-film transistor (TFT) backplane. The proposed pixel structures compensate the variations of the threshold voltage and mobility of the driving TFT using the subthreshold current. The simulated results show that the emission current error of the proposed pixel structure B ranges from -2.25 to 2.02 least significant bit (LSB) when the variations of the threshold voltage and mobility of the driving TFT are ±0.5 V and ±10%, respectively.

  1. Current-voltage characteristics and transition voltage spectroscopy of individual redox proteins.

    Science.gov (United States)

    Artés, Juan M; López-Martínez, Montserrat; Giraudet, Arnaud; Díez-Pérez, Ismael; Sanz, Fausto; Gorostiza, Pau

    2012-12-19

    Understanding how molecular conductance depends on voltage is essential for characterizing molecular electronics devices. We reproducibly measured current-voltage characteristics of individual redox-active proteins by scanning tunneling microscopy under potentiostatic control in both tunneling and wired configurations. From these results, transition voltage spectroscopy (TVS) data for individual redox molecules can be calculated and analyzed statistically, adding a new dimension to conductance measurements. The transition voltage (TV) is discussed in terms of the two-step electron transfer (ET) mechanism. Azurin displays the lowest TV measured to date (0.4 V), consistent with the previously reported distance decay factor. This low TV may be advantageous for fabricating and operating molecular electronic devices for different applications. Our measurements show that TVS is a helpful tool for single-molecule ET measurements and suggest a mechanism for gating of ET between partner redox proteins.

  2. Improvement in Brightness Uniformity by Compensating for the Threshold Voltages of Both the Driving Thin-Film Transistor and the Organic Light-Emitting Diode for Active-Matrix Organic Light-Emitting Diode Displays

    Directory of Open Access Journals (Sweden)

    Ching-Lin Fan

    2014-01-01

    Full Text Available This paper proposes a novel pixel circuit design and driving method for active-matrix organic light-emitting diode (AM-OLED displays that use low-temperature polycrystalline-silicon thin-film transistors (LTPS-TFTs as driving element. The automatic integrated circuit modeling simulation program with integrated circuit emphasis (AIM-SPICE simulator was used to verify that the proposed pixel circuit, which comprises five transistors and one capacitor, can supply uniform output current. The voltage programming method of the proposed pixel circuit comprises three periods: reset, compensation with data input, and emission periods. The simulated results reflected excellent performance. For instance, when ΔVTH=±0.33 V, the average error rate of the OLED current variation was low (<0.8%, and when ΔVTH_OLED=+0.33 V, the error rate of the OLED current variation was 4.7%. Moreover, when the I×R (current × resistance drop voltage of a power line was 0.3 V, the error rate of the OLED current variation was 5.8%. The simulated results indicated that the proposed pixel circuit exhibits high immunity to the threshold voltage deviation of both the driving poly-Si TFTs and OLEDs, and simultaneously compensates for the I×R drop voltage of a power line.

  3. Power Efficient Design of DisplayPort (7.0) Using Low-voltage differential signaling IO Standard Via UltraScale Field Programming Gate Arrays

    DEFF Research Database (Denmark)

    Das, Bhagwan; Abdullah, M.F.L.; Hussain, Dil muhammed Akbar

    2017-01-01

    Port (7.0) need be reduced. In this paper, a power efficient design for DisplayPort (7.0) is proposed using LVDS IO Standard. The proposed design is tested for different frequencies; 500 MHz, 700 MHz, 1.0 GHz, and 1.6 GHz. The design is implemented using vhdl in UltraScale FPGA. It is determined...... the designed vhdl based design of DisplayPort (7.0) can reduced 92% using LVDS IO Standard for all frequencies; 500 MHz, 700 MHz, 1.0 GHz, and 1.6 GHz, compared to vhdl based design of DisplayPort (7.0) without using IO Standard. The proposed design of vhdl based design of DisplayPort (7.0) using LVDS IO...... Standard offers no power consumption for DisplayPort (7.0) in standby mode. The vhdl based design of DisplayPort (7.0) using LVDS IO Standard will be helpful to process the high resolution video at low power consumption...

  4. LTPS-TFT Pixel Circuit Compensating for TFT Threshold Voltage Shift and IR-Drop on the Power Line for AMOLED Displays

    Directory of Open Access Journals (Sweden)

    Ching-Lin Fan

    2012-01-01

    Full Text Available We propose a new pixel design for the active matrix organic light-emitting diode (AMOLED using low-temperature polycrystalline silicon thin-film transistors (LTPS-TFTs. The proposed pixel is composed of four switching TFTs, one driving TFT (DTFT, and one capacitor. The simulation results are performed by AIM-SPICE software. The error rate of OLED output current with (threshold voltage variation (0.3 V and power line drop by 1 V are improved to about 1.67% and 15%, respectively. Thus, the proposed pixel circuit can successfully overcome drawbacks suffered from DTFT threshold voltage deviation and IR-drop on power line.

  5. The Need for Reproducibility

    Energy Technology Data Exchange (ETDEWEB)

    Robey, Robert W. [Los Alamos National Laboratory

    2016-06-27

    The purpose of this presentation is to consider issues of reproducibility, specifically it determines whether bitwise reproducible computation is possible, if computational research in DOE improves its publication process, and if reproducible results can be achieved apart from the peer review process?

  6. Lowering of the firing voltage and reducing of the discharge delay time in alternating current plasma display panels by a discontinuous spin-coated LaB6 film on the MgO protective layer

    Directory of Open Access Journals (Sweden)

    Jiang Deng

    2014-03-01

    Full Text Available A spin coated LaB6 discontinuous film is covered on MgO protective layer to improve the discharge performance of alternating current plasma display panels. Under the premise of high transmittance of more than 90%, a very small amount of polycrystal LaB6 powders added in an organic solvent are chosen as the coating solution. The discharge characteristics results show that with 250 torr 5% Xe-Ne pressure, the firing voltage and discharge delay time of the test panel with LaB6/MgO double protective layer are decreased by 13.4% and 36.5%, respectively, compared with that of conventional MgO protective layer, likely owing to the low work function of LaB6. Furthermore, the aging time of the proposed structure is comparable to that of pure MgO protective layer. Therefore, it will not increase the production costs and is highly suitable to be applied for alternating current plasma display panels with low electrical power consumption.

  7. Lowering of the firing voltage and reducing of the discharge delay time in alternating current plasma display panels by a discontinuous spin-coated LaB{sub 6} film on the MgO protective layer

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Jiang, E-mail: dj78291@163.com [School of Physical Electronic, University of Electronic Science and Technology of China, No.4, Section 2, Jianshe North Road, 610054 Chengdu (China); Zeng, Baoqing [School of Physical Electronic, University of Electronic Science and Technology of China, No.4, Section 2, Jianshe North Road, 610054 Chengdu (China); Zhongshan Institute, University of Electronic Science and Technology of China, 528402 zhongshan (China); Wang, Xiaoju; Lin, Zulun; Qi, Kangcheng; Cao, Guichuan [School of Opto-electronic Information, University of Electronic Science and Technology of China, No.4, Section 2, Jianshe North Road, 610054 Chengdu (China)

    2014-03-15

    A spin coated LaB{sub 6} discontinuous film is covered on MgO protective layer to improve the discharge performance of alternating current plasma display panels. Under the premise of high transmittance of more than 90%, a very small amount of polycrystal LaB{sub 6} powders added in an organic solvent are chosen as the coating solution. The discharge characteristics results show that with 250 torr 5% Xe-Ne pressure, the firing voltage and discharge delay time of the test panel with LaB{sub 6}/MgO double protective layer are decreased by 13.4% and 36.5%, respectively, compared with that of conventional MgO protective layer, likely owing to the low work function of LaB{sub 6.} Furthermore, the aging time of the proposed structure is comparable to that of pure MgO protective layer. Therefore, it will not increase the production costs and is highly suitable to be applied for alternating current plasma display panels with low electrical power consumption.

  8. Voltage verification unit

    Science.gov (United States)

    Martin, Edward J.

    2008-01-15

    A voltage verification unit and method for determining the absence of potentially dangerous potentials within a power supply enclosure without Mode 2 work is disclosed. With this device and method, a qualified worker, following a relatively simple protocol that involves a function test (hot, cold, hot) of the voltage verification unit before Lock Out/Tag Out and, and once the Lock Out/Tag Out is completed, testing or "trying" by simply reading a display on the voltage verification unit can be accomplished without exposure of the operator to the interior of the voltage supply enclosure. According to a preferred embodiment, the voltage verification unit includes test leads to allow diagnostics with other meters, without the necessity of accessing potentially dangerous bus bars or the like.

  9. A right to reproduce?

    Science.gov (United States)

    Quigley, Muireann

    2010-10-01

    How should we conceive of a right to reproduce? And, morally speaking, what might be said to justify such a right? These are just two questions of interest that are raised by the technologies of assisted reproduction. This paper analyses the possible legitimate grounds for a right to reproduce within the two main theories of rights; interest theory and choice theory.

  10. Magni Reproducibility Example

    DEFF Research Database (Denmark)

    2016-01-01

    An example of how to use the magni.reproducibility package for storing metadata along with results from a computational experiment. The example is based on simulating the Mandelbrot set.......An example of how to use the magni.reproducibility package for storing metadata along with results from a computational experiment. The example is based on simulating the Mandelbrot set....

  11. Reproducibility in Seismic Imaging

    Directory of Open Access Journals (Sweden)

    González-Verdejo O.

    2012-04-01

    Full Text Available Within the field of exploration seismology, there is interest at national level of integrating reproducibility in applied, educational and research activities related to seismic processing and imaging. This reproducibility implies the description and organization of the elements involved in numerical experiments. Thus, a researcher, teacher or student can study, verify, repeat, and modify them independently. In this work, we document and adapt reproducibility in seismic processing and imaging to spread this concept and its benefits, and to encourage the use of open source software in this area within our academic and professional environment. We present an enhanced seismic imaging example, of interest in both academic and professional environments, using Mexican seismic data. As a result of this research, we prove that it is possible to assimilate, adapt and transfer technology at low cost, using open source software and following a reproducible research scheme.

  12. Low driving voltage and fast-response in-plane switching liquid crystal display%低驱动电压和快速响应的共面转换液晶显示器

    Institute of Scientific and Technical Information of China (English)

    王森; 孙玉宝

    2016-01-01

    In-plane switching liquid crystal displays (IPS-LCDs)are widely applied in TFT-LCD for its excellent viewing angle and outstanding ability of color reproduction.However,its development in high-end LCDs is limited by its slow response.A fast response IPS-LCD with protrusion electrode is proposed in this paper,and its optical characteristics is simulated by TechWiz software.With the pro-trusion electrode,the driving voltage of IPS-LCD is reduced by 2.3 V.Although the driving voltage is reduced,the electric field in the liquid crystal layer is changed due to the electrode on protrusion,so the rise response speed is improved.In addition,the protrusion structure reduces the effective cell gap of the LC layer,and the decay time is proportional to the square of the cell thickness,so the decay re-sponse speed is also obviously improved.The whole response speed is improved by approximately 38% in contrast with the conventional IPS-LCD.%共面转换液晶显示器(IPS-LCD)由于其优异的视角特性和色彩还原能力在 TFT-LCD 中得到了广泛应用,然而响应速度慢的缺点始终限制着其在高端液晶显示器中的发展.本文中提出一种凸起电极结构的共面转换液晶显示器,并采用 TechWiz 软件模拟了该结构的电光特性.与传统 IPS-LCD 相比,我们提出的新结构 IPS-LCD 的驱动电压降低了2.3 V.在响应时间方面,尽管驱动电压降低了,但是由于凸起电极改变液晶层中的电场状况,因此上升响应速度得到了一定提高.此外,凸起结构减小了液晶层的等效盒厚,因为下降时间正比于液晶盒厚的平方,所以下降响应速度也得到了明显提高,该结构的整体响应速度相比传统结构提高了大约38%.

  13. Image Descriptors for Displays

    Science.gov (United States)

    1975-03-01

    hypothetical televison display. The viewing distance is 4 picture heights, and the bandwidth limitation has been set by the U.S. Monochrome Standards...significantly influence the power spectrum over most of the video frequency range. A large dc component and a small random component provide another scene... influences . It was Illuminated with natural light to a brightness of over 300 ft-L. The high brightness levels were chosen so as to nearly reproduce the

  14. Isomerically Pure Tetramethylrhodamine Voltage Reporters.

    Science.gov (United States)

    Deal, Parker E; Kulkarni, Rishikesh U; Al-Abdullatif, Sarah H; Miller, Evan W

    2016-07-27

    We present the design, synthesis, and application of a new family of fluorescent voltage indicators based on isomerically pure tetramethylrhodamines. These new Rhodamine Voltage Reporters, or RhoVRs, use photoinduced electron transfer (PeT) as a trigger for voltage sensing, display excitation and emission profiles in the green to orange region of the visible spectrum, demonstrate high sensitivity to membrane potential changes (up to 47% ΔF/F per 100 mV), and employ a tertiary amide derived from sarcosine, which aids in membrane localization and simultaneously simplifies the synthetic route to the voltage sensors. The most sensitive of the RhoVR dyes, RhoVR 1, features a methoxy-substituted diethylaniline donor and phenylenevinylene molecular wire at the 5'-position of the rhodamine aryl ring, exhibits the highest voltage sensitivity to date for red-shifted PeT-based voltage sensors, and is compatible with simultaneous imaging alongside green fluorescent protein-based indicators. The discoveries that sarcosine-based tertiary amides in the context of molecular-wire voltage indicators prevent dye internalization and 5'-substituted voltage indicators exhibit improved voltage sensitivity should be broadly applicable to other types of PeT-based voltage-sensitive fluorophores.

  15. Reproducible research in palaeomagnetism

    Science.gov (United States)

    Lurcock, Pontus; Florindo, Fabio

    2015-04-01

    The reproducibility of research findings is attracting increasing attention across all scientific disciplines. In palaeomagnetism as elsewhere, computer-based analysis techniques are becoming more commonplace, complex, and diverse. Analyses can often be difficult to reproduce from scratch, both for the original researchers and for others seeking to build on the work. We present a palaeomagnetic plotting and analysis program designed to make reproducibility easier. Part of the problem is the divide between interactive and scripted (batch) analysis programs. An interactive desktop program with a graphical interface is a powerful tool for exploring data and iteratively refining analyses, but usually cannot operate without human interaction. This makes it impossible to re-run an analysis automatically, or to integrate it into a larger automated scientific workflow - for example, a script to generate figures and tables for a paper. In some cases the parameters of the analysis process itself are not saved explicitly, making it hard to repeat or improve the analysis even with human interaction. Conversely, non-interactive batch tools can be controlled by pre-written scripts and configuration files, allowing an analysis to be 'replayed' automatically from the raw data. However, this advantage comes at the expense of exploratory capability: iteratively improving an analysis entails a time-consuming cycle of editing scripts, running them, and viewing the output. Batch tools also tend to require more computer expertise from their users. PuffinPlot is a palaeomagnetic plotting and analysis program which aims to bridge this gap. First released in 2012, it offers both an interactive, user-friendly desktop interface and a batch scripting interface, both making use of the same core library of palaeomagnetic functions. We present new improvements to the program that help to integrate the interactive and batch approaches, allowing an analysis to be interactively explored and refined

  16. Matrix-addressable electrochromic display cell

    Science.gov (United States)

    Beni, G.; Schiavone, L. M.

    1981-04-01

    We report an electrochromic display cell with intrinsic matrix addressability. The cell, based on a sputtered iridium oxide film (SIROF) and a tantalum-oxide hysteretic counterelectrode, has electrochromic parameters (i.e., response times, operating voltages, and contrast) similar to those of other SIROF display devices, but in addition, has short-circuit memory and voltage threshold. Memory and threshold are sufficiently large to allow, in principle, multiplexing of electrochromic display panels of large-screen TV pixel size.

  17. Opening Reproducible Research

    Science.gov (United States)

    Nüst, Daniel; Konkol, Markus; Pebesma, Edzer; Kray, Christian; Klötgen, Stephanie; Schutzeichel, Marc; Lorenz, Jörg; Przibytzin, Holger; Kussmann, Dirk

    2016-04-01

    Open access is not only a form of publishing such that research papers become available to the large public free of charge, it also refers to a trend in science that the act of doing research becomes more open and transparent. When science transforms to open access we not only mean access to papers, research data being collected, or data being generated, but also access to the data used and the procedures carried out in the research paper. Increasingly, scientific results are generated by numerical manipulation of data that were already collected, and may involve simulation experiments that are completely carried out computationally. Reproducibility of research findings, the ability to repeat experimental procedures and confirm previously found results, is at the heart of the scientific method (Pebesma, Nüst and Bivand, 2012). As opposed to the collection of experimental data in labs or nature, computational experiments lend themselves very well for reproduction. Some of the reasons why scientists do not publish data and computational procedures that allow reproduction will be hard to change, e.g. privacy concerns in the data, fear for embarrassment or of losing a competitive advantage. Others reasons however involve technical aspects, and include the lack of standard procedures to publish such information and the lack of benefits after publishing them. We aim to resolve these two technical aspects. We propose a system that supports the evolution of scientific publications from static papers into dynamic, executable research documents. The DFG-funded experimental project Opening Reproducible Research (ORR) aims for the main aspects of open access, by improving the exchange of, by facilitating productive access to, and by simplifying reuse of research results that are published over the Internet. Central to the project is a new form for creating and providing research results, the executable research compendium (ERC), which not only enables third parties to

  18. Randomised reproducing graphs

    CERN Document Server

    Jordan, Jonathan

    2011-01-01

    We introduce a model for a growing random graph based on simultaneous reproduction of the vertices. The model can be thought of as a generalisation of the reproducing graphs of Southwell and Cannings and Bonato et al to allow for a random element, and there are three parameters, $\\alpha$, $\\beta$ and $\\gamma$, which are the probabilities of edges appearing between different types of vertices. We show that as the probabilities associated with the model vary there are a number of phase transitions, in particular concerning the degree sequence. If $(1+\\alpha)(1+\\gamma)1$ then the degree of a typical vertex grows to infinity, and the proportion of vertices having any fixed degree $d$ tends to zero. We also give some results on the number of edges and on the spectral gap.

  19. Projection displays

    Science.gov (United States)

    Chiu, George L.; Yang, Kei H.

    1998-08-01

    Projection display in today's market is dominated by cathode ray tubes (CRTs). Further progress in this mature CRT projector technology will be slow and evolutionary. Liquid crystal based projection displays have gained rapid acceptance in the business market. New technologies are being developed on several fronts: (1) active matrix built from polysilicon or single crystal silicon; (2) electro- optic materials using ferroelectric liquid crystal, polymer dispersed liquid crystals or other liquid crystal modes, (3) micromechanical-based transducers such as digital micromirror devices, and grating light valves, (4) high resolution displays to SXGA and beyond, and (5) high brightness. This article reviews the projection displays from a transducer technology perspective along with a discussion of markets and trends.

  20. High-voltage picoamperemeter

    Energy Technology Data Exchange (ETDEWEB)

    Bugl, Andrea; Ball, Markus; Boehmer, Michael; Doerheim, Sverre; Hoenle, Andreas; Konorov, Igor [Technische Universitaet Muenchen, Garching (Germany); Ketzer, Bernhard [Technische Universitaet Muenchen, Garching (Germany); Helmholtz-Institut fuer Strahlen- und Kernphysik, Bonn (Germany)

    2014-07-01

    Current measurements in the nano- and picoampere region on high voltage are an important tool to understand charge transfer processes in micropattern gas detectors like the Gas Electron Multiplier (GEM). They are currently used to e.g. optimize the field configuration in a multi-GEM stack to be used in the ALICE TPC after the upgrade of the experiment during the 2nd long shutdown of the LHC. Devices which allow measurements down to 1pA at high voltage up to 6 kV have been developed at TU Muenchen. They are based on analog current measurements via the voltage drop over a switchable shunt. A microcontroller collects 128 digital ADC values and calculates their mean and standard deviation. This information is sent with a wireless transmitting unit to a computer and stored in a root file. A nearly unlimited number of devices can be operated simultaneously and read out by a single receiver. The results can also be displayed on a LCD directly at the device. Battery operation and the wireless readout are important to protect the user from any contact to high voltage. The principle of the device is explained, and systematic studies of their properties are shown.

  1. Voltage-gated lipid ion channels

    DEFF Research Database (Denmark)

    Blicher, Andreas; Heimburg, Thomas Rainer

    2013-01-01

    Synthetic lipid membranes can display channel-like ion conduction events even in the absence of proteins. We show here that these events are voltage-gated with a quadratic voltage dependence as expected from electrostatic theory of capacitors. To this end, we recorded channel traces and current...

  2. Accurate Switched-Voltage voltage averaging circuit

    OpenAIRE

    金光, 一幸; 松本, 寛樹

    2006-01-01

    Abstract ###This paper proposes an accurate Switched-Voltage (SV) voltage averaging circuit. It is presented ###to compensated for NMOS missmatch error at MOS differential type voltage averaging circuit. ###The proposed circuit consists of a voltage averaging and a SV sample/hold (S/H) circuit. It can ###operate using nonoverlapping three phase clocks. Performance of this circuit is verified by PSpice ###simulations.

  3. 双稳态显示的一种新型低功耗高压驱动%A New Power-Efficient High-Voltage Driver for Bistable Displays

    Institute of Scientific and Technical Information of China (English)

    Ann Monté; Jan Doutreloigne; André Van Calster

    2008-01-01

    A big problem in portable applications like e-books and pda's (personal digital assistant) is the lifetime of the batteries. The power consumption of the battery is determined by the processing of the ap-paratus on one hand and by the driver of its display on the other hand. A reduction of the power consump-tion can be achieved by optimizing the display driver. It will be proved that the energy consumed by the driver can be reduced for 50% by designing an intelligent driver that calculates the row and column wave-forms for every image based on the several energy-saving principles.%电池的使用寿命不够长是电子书、PDA 等之类的便携式显示应用的一个重大问题.电池的功耗一方面取决于其制作工艺,另一方面还与显示器的驱动有关.优化显示器的驱动可以降低其功耗.文章介绍了一种智能型驱动,通过对其每个图像的行列波的计算可知其功耗降低了 50%.

  4. Contextual sensitivity in scientific reproducibility.

    Science.gov (United States)

    Van Bavel, Jay J; Mende-Siedlecki, Peter; Brady, William J; Reinero, Diego A

    2016-06-07

    In recent years, scientists have paid increasing attention to reproducibility. For example, the Reproducibility Project, a large-scale replication attempt of 100 studies published in top psychology journals found that only 39% could be unambiguously reproduced. There is a growing consensus among scientists that the lack of reproducibility in psychology and other fields stems from various methodological factors, including low statistical power, researcher's degrees of freedom, and an emphasis on publishing surprising positive results. However, there is a contentious debate about the extent to which failures to reproduce certain results might also reflect contextual differences (often termed "hidden moderators") between the original research and the replication attempt. Although psychologists have found extensive evidence that contextual factors alter behavior, some have argued that context is unlikely to influence the results of direct replications precisely because these studies use the same methods as those used in the original research. To help resolve this debate, we recoded the 100 original studies from the Reproducibility Project on the extent to which the research topic of each study was contextually sensitive. Results suggested that the contextual sensitivity of the research topic was associated with replication success, even after statistically adjusting for several methodological characteristics (e.g., statistical power, effect size). The association between contextual sensitivity and replication success did not differ across psychological subdisciplines. These results suggest that researchers, replicators, and consumers should be mindful of contextual factors that might influence a psychological process. We offer several guidelines for dealing with contextual sensitivity in reproducibility.

  5. 3D touchable holographic light-field display.

    Science.gov (United States)

    Yamaguchi, Masahiro; Higashida, Ryo

    2016-01-20

    We propose a new type of 3D user interface: interaction with a light field reproduced by a 3D display. The 3D display used in this work reproduces a 3D light field, and a real image can be reproduced in midair between the display and the user. When using a finger to touch the real image, the light field from the display will scatter. Then, the 3D touch sensing is realized by detecting the scattered light by a color camera. In the experiment, the light-field display is constructed with a holographic screen and a projector; thus, a preliminary implementation of a 3D touch is demonstrated.

  6. Augmenting digital displays with computation

    Science.gov (United States)

    Liu, Jing

    As we inevitably step deeper and deeper into a world connected via the Internet, more and more information will be exchanged digitally. Displays are the interface between digital information and each individual. Naturally, one fundamental goal of displays is to reproduce information as realistically as possible since humans still care a lot about what happens in the real world. Human eyes are the receiving end of such information exchange; therefore it is impossible to study displays without studying the human visual system. In fact, the design of displays is rather closely coupled with what human eyes are capable of perceiving. For example, we are less interested in building displays that emit light in the invisible spectrum. This dissertation explores how we can augment displays with computation, which takes both display hardware and the human visual system into consideration. Four novel projects on display technologies are included in this dissertation: First, we propose a software-based approach to driving multiview autostereoscopic displays. Our display algorithm can dynamically assign views to hardware display zones based on multiple observers' current head positions, substantially reducing crosstalk and stereo inversion. Second, we present a dense projector array that creates a seamless 3D viewing experience for multiple viewers. We smoothly interpolate the set of viewer heights and distances on a per-vertex basis across the arrays field of view, reducing image distortion, crosstalk, and artifacts from tracking errors. Third, we propose a method for high dynamic range display calibration that takes into account the variation of the chrominance error over luminance. We propose a data structure for enabling efficient representation and querying of the calibration function, which also allows user-guided balancing between memory consumption and the amount of computation. Fourth, we present user studies that demonstrate that the ˜ 60 Hz critical flicker fusion

  7. Striations in Plasma Display Panel

    Institute of Scientific and Technical Information of China (English)

    OUYANG Ji-Ting; CAO Jing; MIAO Jin-Song

    2005-01-01

    @@ The phenomenon of striation has been investigated experimentally in a macroscopic ac-plasma display panel (PDP). The relationship between the characteristics of striation and the operation conditions including voltage, frequency, rib, and electrode configuration, etc is obtained experimentally. The origin of the striations is considered to be the ionization waves in the transient positive column near the dielectric surface in the anode area during the discharge, and the perturbation is caused by resonance kinetic effects in inert gas.

  8. Towards Reproducibility in Computational Hydrology

    Science.gov (United States)

    Hutton, Christopher; Wagener, Thorsten; Freer, Jim; Han, Dawei

    2016-04-01

    The ability to reproduce published scientific findings is a foundational principle of scientific research. Independent observation helps to verify the legitimacy of individual findings; build upon sound observations so that we can evolve hypotheses (and models) of how catchments function; and move them from specific circumstances to more general theory. The rise of computational research has brought increased focus on the issue of reproducibility across the broader scientific literature. This is because publications based on computational research typically do not contain sufficient information to enable the results to be reproduced, and therefore verified. Given the rise of computational analysis in hydrology over the past 30 years, to what extent is reproducibility, or a lack thereof, a problem in hydrology? Whilst much hydrological code is accessible, the actual code and workflow that produced and therefore documents the provenance of published scientific findings, is rarely available. We argue that in order to advance and make more robust the process of hypothesis testing and knowledge creation within the computational hydrological community, we need to build on from existing open data initiatives and adopt common standards and infrastructures to: first make code re-useable and easy to find through consistent use of metadata; second, publish well documented workflows that combine re-useable code together with data to enable published scientific findings to be reproduced; finally, use unique persistent identifiers (e.g. DOIs) to reference re-useable and reproducible code, thereby clearly showing the provenance of published scientific findings. Whilst extra effort is require to make work reproducible, there are benefits to both the individual and the broader community in doing so, which will improve the credibility of the science in the face of the need for societies to adapt to changing hydrological environments.

  9. Universal Numeric Segmented Display

    CERN Document Server

    Azad, Md Abul kalam; Kamruzzaman, S M

    2010-01-01

    Segmentation display plays a vital role to display numerals. But in today's world matrix display is also used in displaying numerals. Because numerals has lots of curve edges which is better supported by matrix display. But as matrix display is costly and complex to implement and also needs more memory, segment display is generally used to display numerals. But as there is yet no proposed compact display architecture to display multiple language numerals at a time, this paper proposes uniform display architecture to display multiple language digits and general mathematical expressions with higher accuracy and simplicity by using a 18-segment display, which is an improvement over the 16 segment display.

  10. Reproducible Research in Speech Sciences

    Directory of Open Access Journals (Sweden)

    Kandaacute;lmandaacute;n Abari

    2012-11-01

    Full Text Available Reproducible research is the minimum standard of scientific claims in cases when independent replication proves to be difficult. With the special combination of available software tools, we provide a reproducibility recipe for the experimental research conducted in some fields of speech sciences. We have based our model on the triad of the R environment, the EMU-format speech database, and the executable publication. We present the use of three typesetting systems (LaTeX, Markdown, Org, with the help of a mini research.

  11. Real time speech formant analyzer and display

    Energy Technology Data Exchange (ETDEWEB)

    Holland, George E. (Ames, IA); Struve, Walter S. (Ames, IA); Homer, John F. (Ames, IA)

    1987-01-01

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  12. Hysteresis in voltage-gated channels.

    Science.gov (United States)

    Villalba-Galea, Carlos A

    2016-09-30

    Ion channels constitute a superfamily of membrane proteins found in all living creatures. Their activity allows fast translocation of ions across the plasma membrane down the ion's transmembrane electrochemical gradient, resulting in a difference in electrical potential across the plasma membrane, known as the membrane potential. A group within this superfamily, namely voltage-gated channels, displays activity that is sensitive to the membrane potential. The activity of voltage-gated channels is controlled by the membrane potential, while the membrane potential is changed by these channels' activity. This interplay produces variations in the membrane potential that have evolved into electrical signals in many organisms. These signals are essential for numerous biological processes, including neuronal activity, insulin release, muscle contraction, fertilization and many others. In recent years, the activity of the voltage-gated channels has been observed not to follow a simple relationship with the membrane potential. Instead, it has been shown that the activity of voltage-gated channel displays hysteresis. In fact, a growing number of evidence have demonstrated that the voltage dependence of channel activity is dynamically modulated by activity itself. In spite of the great impact that this property can have on electrical signaling, hysteresis in voltage-gated channels is often overlooked. Addressing this issue, this review provides examples of voltage-gated ion channels displaying hysteretic behavior. Further, this review will discuss how Dynamic Voltage Dependence in voltage-gated channels can have a physiological role in electrical signaling. Furthermore, this review will elaborate on the current thoughts on the mechanism underlying hysteresis in voltage-gated channels.

  13. Reproducible Bioinformatics Research for Biologists

    Science.gov (United States)

    This book chapter describes the current Big Data problem in Bioinformatics and the resulting issues with performing reproducible computational research. The core of the chapter provides guidelines and summaries of current tools/techniques that a noncomputational researcher would need to learn to pe...

  14. Evaluation of multichannel reproduced sound

    DEFF Research Database (Denmark)

    Choisel, Sylvain; Wickelmaier, Florian Maria

    2007-01-01

    A study was conducted with the goal of quantifying auditory attributes which underlie listener preference for multichannel reproduced sound. Short musical excerpts were presented in mono, stereo and several multichannel formats to a panel of forty selected listeners. Scaling of auditory attributes...

  15. [Reproducibility of subjective refraction measurement].

    Science.gov (United States)

    Grein, H-J; Schmidt, O; Ritsche, A

    2014-11-01

    Reproducibility of subjective refraction measurement is limited by various factors. The main factors affecting reproducibility include the characteristics of the measurement method and of the subject and the examiner. This article presents the results of a study on this topic, focusing on the reproducibility of subjective refraction measurement in healthy eyes. The results of previous studies are not all presented in the same way by the respective authors and cannot be fully standardized without consulting the original scientific data. To the extent that they are comparable, the results of our study largely correspond largely with those of previous investigations: During repeated subjective refraction measurement, 95% of the deviation from the mean value was approximately ±0.2 D to ±0.65 D for the spherical equivalent and cylindrical power. The reproducibility of subjective refraction measurement in healthy eyes is limited, even under ideal conditions. Correct assessment of refraction results is only feasible after identifying individual variability. Several measurements are required. Refraction cannot be measured without a tolerance range. The English full-text version of this article is available at SpringerLink (under supplemental).

  16. Reproducible research in computational science.

    Science.gov (United States)

    Peng, Roger D

    2011-12-02

    Computational science has led to exciting new developments, but the nature of the work has exposed limitations in our ability to evaluate published findings. Reproducibility has the potential to serve as a minimum standard for judging scientific claims when full independent replication of a study is not possible.

  17. Voltage regulation of connexin channel conductance.

    Science.gov (United States)

    Oh, Seunghoon; Bargiello, Thaddeus A

    2015-01-01

    Voltage is an important parameter that regulates the conductance of both intercellular and plasma membrane channels (undocked hemichannels) formed by the 21 members of the mammalian connexin gene family. Connexin channels display two forms of voltage-dependence, rectification of ionic currents and voltage-dependent gating. Ionic rectification results either from asymmetries in the distribution of fixed charges due to heterotypic pairing of different hemichannels, or by channel block, arising from differences in the concentrations of divalent cations on opposite sides of the junctional plaque. This rectification likely underpins the electrical rectification observed in some electrical synapses. Both intercellular and undocked hemichannels also display two distinct forms of voltage-dependent gating, termed Vj (fast)-gating and loop (slow)-gating. This review summarizes our current understanding of the molecular determinants and mechanisms underlying these conformational changes derived from experimental, molecular-genetic, structural, and computational approaches.

  18. Performance studies of electrochromic displays

    Science.gov (United States)

    Ionescu, Ciprian; Dobre, Robert Alexandru

    2015-02-01

    The idea of having flexible, very thin, light, low power and even low cost display devices implemented using new materials and technologies is very exciting. Nowadays we can talk about more than just concepts, such devices exist, and they are part of an emerging concept: FOLAE (Flexible Organic and Large Area Electronics). Among the advantages of electrochromic devices are the low power consumption (they are non-emissive, i.e. passive) and the aspect like ink on paper with good viewing angle. Some studies are still necessary for further development, before proper performances are met and the functional behavior can be predicted. This paper presents the results of the research activity conducted to develop electric characterization platform for the organic electronics display devices, especially electrochromic displays, to permit a thorough study. The hardware part of platform permits the measuring of different electric and optical parameters. Charging/discharging a display element presents high interest for optimal driving circuitry. In this sense, the corresponding waveforms are presented. The contrast of the display is also measured for different operation conditions as driving voltage levels and duration. The effect of temperature on electrical and optical parameters (contrast) of the display will be also presented.

  19. Reproducibility of NIF hohlraum measurements

    Science.gov (United States)

    Moody, J. D.; Ralph, J. E.; Turnbull, D. P.; Casey, D. T.; Albert, F.; Bachmann, B. L.; Doeppner, T.; Divol, L.; Grim, G. P.; Hoover, M.; Landen, O. L.; MacGowan, B. J.; Michel, P. A.; Moore, A. S.; Pino, J. E.; Schneider, M. B.; Tipton, R. E.; Smalyuk, V. A.; Strozzi, D. J.; Widmann, K.; Hohenberger, M.

    2015-11-01

    The strategy of experimentally ``tuning'' the implosion in a NIF hohlraum ignition target towards increasing hot-spot pressure, areal density of compressed fuel, and neutron yield relies on a level of experimental reproducibility. We examine the reproducibility of experimental measurements for a collection of 15 identical NIF hohlraum experiments. The measurements include incident laser power, backscattered optical power, x-ray measurements, hot-electron fraction and energy, and target characteristics. We use exact statistics to set 1-sigma confidence levels on the variations in each of the measurements. Of particular interest is the backscatter and laser-induced hot-spot locations on the hohlraum wall. Hohlraum implosion designs typically include variability specifications [S. W. Haan et al., Phys. Plasmas 18, 051001 (2011)]. We describe our findings and compare with the specifications. This work was performed under the auspices of the U.S. Department of Energy by University of California, Lawrence Livermore National Laboratory under Contract W-7405-Eng-48.

  20. Voltage-gated lipid ion channels

    DEFF Research Database (Denmark)

    Blicher, Andreas; Heimburg, Thomas Rainer

    2013-01-01

    Synthetic lipid membranes can display channel-like ion conduction events even in the absence of proteins. We show here that these events are voltage-gated with a quadratic voltage dependence as expected from electrostatic theory of capacitors. To this end, we recorded channel traces and current...... histograms in patch-experiments on lipid membranes. We derived a theoretical current-voltage relationship for pores in lipid membranes that describes the experimental data very well when assuming an asymmetric membrane. We determined the equilibrium constant between closed and open state and the open...... probability as a function of voltage. The voltage-dependence of the lipid pores is found comparable to that of protein channels. Lifetime distributions of open and closed events indicate that the channel open distribution does not follow exponential statistics but rather power law behavior for long open times...

  1. Transient Voltage Recorder

    Science.gov (United States)

    Medelius, Pedro J. (Inventor); Simpson, Howard J. (Inventor)

    2002-01-01

    A voltage transient recorder can detect lightning induced transient voltages. The recorder detects a lightning induced transient voltage and adjusts input amplifiers to accurately record transient voltage magnitudes. The recorder stores voltage data from numerous monitored channels, or devices. The data is time stamped and can be output in real time, or stored for later retrieval. The transient recorder, in one embodiment, includes an analog-to-digital converter and a voltage threshold detector. When an input voltage exceeds a pre-determined voltage threshold, the recorder stores the incoming voltage magnitude and time of arrival. The recorder also determines if its input amplifier circuits clip the incoming signal or if the incoming signal is too low. If the input data is clipped or too low, the recorder adjusts the gain of the amplifier circuits to accurately acquire subsequent components of the lightning induced transients.

  2. Reproducibility of a reaming test

    DEFF Research Database (Denmark)

    Pilny, Lukas; Müller, Pavel; De Chiffre, Leonardo

    2014-01-01

    The reproducibility of a reaming test was analysed to document its applicability as a performance test for cutting fluids. Reaming tests were carried out on a drilling machine using HSS reamers. Workpiece material was an austenitic stainless steel, machined using 4.75 m•min−1 cutting speed and 0...... a built–up edge occurrence hindering a robust evaluation of cutting fluid performance, if the data evaluation is based on surface finish only. Measurements of hole geometry provide documentation to recognise systematic error distorting the performance test....

  3. Reproducibility of a reaming test

    DEFF Research Database (Denmark)

    Pilny, Lukas; Müller, Pavel; De Chiffre, Leonardo

    2012-01-01

    The reproducibility of a reaming test was analysed to document its applicability as a performance test for cutting fluids. Reaming tests were carried out on a drilling machine using HSS reamers. Workpiece material was an austenitic stainless steel, machined using 4.75 m∙min-1 cutting speed and 0...... a built-up edge occurrence hindering a robust evaluation of cutting fluid performance, if the data evaluation is based on surface finish only. Measurements of hole geometry provide documentation to recognize systematic error distorting the performance test....

  4. Automatic voltage imbalance detector

    Science.gov (United States)

    Bobbett, Ronald E.; McCormick, J. Byron; Kerwin, William J.

    1984-01-01

    A device for indicating and preventing damage to voltage cells such as galvanic cells and fuel cells connected in series by detecting sequential voltages and comparing these voltages to adjacent voltage cells. The device is implemented by using operational amplifiers and switching circuitry is provided by transistors. The device can be utilized in battery powered electric vehicles to prevent galvanic cell damage and also in series connected fuel cells to prevent fuel cell damage.

  5. Mixed voltage VLSI design

    Science.gov (United States)

    Panwar, Ramesh; Rennels, David; Alkalaj, Leon

    1993-01-01

    A technique for minimizing the power dissipated in a Very Large Scale Integration (VLSI) chip by lowering the operating voltage without any significant penalty in the chip throughput even though low voltage operation results in slower circuits. Since the overall throughput of a VLSI chip depends on the speed of the critical path(s) in the chip, it may be possible to sustain the throughput rates attained at higher voltages by operating the circuits in the critical path(s) with a high voltage while operating the other circuits with a lower voltage to minimize the power dissipation. The interface between the gates which operate at different voltages is crucial for low power dissipation since the interface may possibly have high static current dissipation thus negating the gains of the low voltage operation. The design of a voltage level translator which does the interface between the low voltage and high voltage circuits without any significant static dissipation is presented. Then, the results of the mixed voltage design using a greedy algorithm on three chips for various operating voltages are presented.

  6. Grating light modulator for projection display

    Institute of Scientific and Technical Information of China (English)

    Jiyong Sun; Shanglian Huang; Jie Zhang; Zhihai Zhang; Yong Zhu

    2009-01-01

    A novel grating light modulator for projection display is introduced. It consists of an upper moveable grat-ing, a bottom mirror, and four supporting posts between them. The moveable grating and the bottom mir-ror compose a phase grating whose phase difference is controlled by the actuating voltage. When the phase difference is 2kπ, the grating light modulator will switch the incident light to zero-order diffraction; when the phase difference is (2k - 1)π, the grating light modulator will diffract light to first-order diffraction. A 16 × 16 modulator array is fabricated by the surface micromachining technology. The device works well when it is actuated by a voltage with 1-kHz frequency and 10-V amplitude. The fabricated grating light modulator can show blackness and brightness when controlled by the voltage. This modulator has potential applications in projection display system.

  7. Evaluation of guidewire path reproducibility.

    Science.gov (United States)

    Schafer, Sebastian; Hoffmann, Kenneth R; Noël, Peter B; Ionita, Ciprian N; Dmochowski, Jacek

    2008-05-01

    The number of minimally invasive vascular interventions is increasing. In these interventions, a variety of devices are directed to and placed at the site of intervention. The device used in almost all of these interventions is the guidewire, acting as a monorail for all devices which are delivered to the intervention site. However, even with the guidewire in place, clinicians still experience difficulties during the interventions. As a first step toward understanding these difficulties and facilitating guidewire and device guidance, we have investigated the reproducibility of the final paths of the guidewire in vessel phantom models on different factors: user, materials and geometry. Three vessel phantoms (vessel diameters approximately 4 mm) were constructed having tortuousity similar to the internal carotid artery from silicon tubing and encased in Sylgard elastomer. Several trained users repeatedly passed two guidewires of different flexibility through the phantoms under pulsatile flow conditions. After the guidewire had been placed, rotational c-arm image sequences were acquired (9 in. II mode, 0.185 mm pixel size), and the phantom and guidewire were reconstructed (512(3), 0.288 mm voxel size). The reconstructed volumes were aligned. The centerlines of the guidewire and the phantom vessel were then determined using region-growing techniques. Guidewire paths appear similar across users but not across materials. The average root mean square difference of the repeated placement was 0.17 +/- 0.02 mm (plastic-coated guidewire), 0.73 +/- 0.55 mm (steel guidewire) and 1.15 +/- 0.65 mm (steel versus plastic-coated). For a given guidewire, these results indicate that the guidewire path is relatively reproducible in shape and position.

  8. Displaying gray shades in liquid crystal displays

    Indian Academy of Sciences (India)

    T N Ruckmongathan

    2003-08-01

    Quality of image in a display depends on the contrast, colour, resolution and the number of gray shades. A large number of gray shades is necessary to display images without any contour lines. These contours are due to limited number of gray shades in the display causing abrupt changes in grayness of the image, while the original image has a gradual change in brightness. Amplitude modulation has the capability to display a large number of gray shades with minimum number of time intervals [1,2]. This paper will cover the underlying principle of amplitude modulation, some variants and its extension to multi-line addressing. Other techniques for displaying gray shades in passive matrix displays are reviewed for the sake of comparison.

  9. Invisible Display in Aluminum

    DEFF Research Database (Denmark)

    Prichystal, Jan Phuklin; Hansen, Hans Nørgaard; Bladt, Henrik Henriksen

    2005-01-01

    for an integrated display in a metal surface is often ruled by design and functionality of a product. The integration of displays in metal surfaces requires metal removal in order to clear the area of the display to some extent. The idea behind an invisible display in Aluminum concerns the processing of a metal...

  10. Technological Aspects: High Voltage

    CERN Document Server

    Faircloth, D C

    2013-01-01

    This paper covers the theory and technological aspects of high-voltage design for ion sources. Electric field strengths are critical to understanding high-voltage breakdown. The equations governing electric fields and the techniques to solve them are discussed. The fundamental physics of high-voltage breakdown and electrical discharges are outlined. Different types of electrical discharges are catalogued and their behaviour in environments ranging from air to vacuum are detailed. The importance of surfaces is discussed. The principles of designing electrodes and insulators are introduced. The use of high-voltage platforms and their relation to system design are discussed. The use of commercially available high-voltage technology such as connectors, feedthroughs and cables are considered. Different power supply technologies and their procurement are briefly outlined. High-voltage safety, electric shocks and system design rules are covered.

  11. Stray voltage mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Jamali, B.; Piercy, R.; Dick, P. [Kinetrics Inc., Toronto, ON (Canada). Transmission and Distribution Technologies

    2008-04-09

    This report discussed issues related to farm stray voltage and evaluated mitigation strategies and costs for limiting voltage to farms. A 3-phase, 3-wire system with no neutral ground was used throughout North America before the 1930s. Transformers were connected phase to phase without any electrical connection between the primary and secondary sides of the transformers. Distribution voltage levels were then increased and multi-grounded neutral wires were added. The earth now forms a parallel return path for the neutral current that allows part of the neutral current to flow continuously through the earth. The arrangement is responsible for causing stray voltage. Stray voltage causes uneven milk production, increased incidences of mastitis, and can create a reluctance to drink water amongst cows when stray voltages are present. Off-farm sources of stray voltage include phase unbalances, undersized neutral wire, and high resistance splices on the neutral wire. Mitigation strategies for reducing stray voltage include phase balancing; conversion from single to 3-phase; increasing distribution voltage levels, and changing pole configurations. 22 refs., 5 tabs., 13 figs.

  12. High voltage engineering

    CERN Document Server

    Rizk, Farouk AM

    2014-01-01

    Inspired by a new revival of worldwide interest in extra-high-voltage (EHV) and ultra-high-voltage (UHV) transmission, High Voltage Engineering merges the latest research with the extensive experience of the best in the field to deliver a comprehensive treatment of electrical insulation systems for the next generation of utility engineers and electric power professionals. The book offers extensive coverage of the physical basis of high-voltage engineering, from insulation stress and strength to lightning attachment and protection and beyond. Presenting information critical to the design, selec

  13. High voltage test techniques

    CERN Document Server

    Kind, Dieter

    2001-01-01

    The second edition of High Voltage Test Techniques has been completely revised. The present revision takes into account the latest international developments in High Voltage and Measurement technology, making it an essential reference for engineers in the testing field.High Voltage Technology belongs to the traditional area of Electrical Engineering. However, this is not to say that the area has stood still. New insulating materials, computing methods and voltage levels repeatedly pose new problems or open up methods of solution; electromagnetic compatibility (EMC) or components and systems al

  14. Mitigation of Unbalanced Voltage Sags and Voltage Unbalance in CIGRE Low Voltage Distribution Network

    OpenAIRE

    Mustafa, Ghullam; Bak-Jensen, Birgitte; Mahat, Pukar; Cecati, Carlo

    2013-01-01

    Any problem with voltage in a power network is undesirable as it aggravates the quality of the power. Power electronic devices such as Voltage Source Converter (VSC) based Static Synchronous Compensator (STATCOM) etc. can be used to mitigate the voltage problems in the distribution system. The voltage problems dealt with in this paper are to show how to mitigate unbalanced voltage sags and voltage unbalance in the CIGRE Low Voltage (LV) test network and net-works like this. The voltage unbala...

  15. Handbook of display technology

    CERN Document Server

    Castellano, Joseph A

    1992-01-01

    This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display tech

  16. Phosphorylation of purified mitochondrial Voltage-Dependent Anion Channel by c-Jun N-terminal Kinase-3 modifies channel voltage-dependence

    Directory of Open Access Journals (Sweden)

    Rajeev Gupta

    2017-06-01

    Full Text Available Voltage-Dependent Anion Channel (VDAC phosphorylated by c-Jun N-terminal Kinase-3 (JNK3 was incorporated into the bilayer lipid membrane. Single-channel electrophysiological properties of the native and the phosphorylated VDAC were compared. The open probability versus voltage curve of the native VDAC displayed symmetry around the voltage axis, whereas that of the phosphorylated VDAC showed asymmetry. This result indicates that phosphorylation by JNK3 modifies voltage-dependence of VDAC.

  17. Large Capacity SMES for Voltage Dip Compensation

    Science.gov (United States)

    Iwatani, Yu; Saito, Fusao; Ito, Toshinobu; Shimada, Mamoru; Ishida, Satoshi; Shimanuki, Yoshio

    Voltage dips of power grids due to thunderbolts, snow damage, and so on, cause serious damage to production lines of precision instruments, for example, semiconductors. In recent years, in order to solve this problem, uninterruptible power supply systems (UPS) are used. UPS, however, has small capacity, so a great number of UPS are needed in large factories. Therefore, we have manufactured the superconducting magnetic energy storage (SMES) system for voltage dip compensation able to protect loads with large capacity collectively. SMES has advantages such as space conservation, long lifetime and others. In field tests, cooperating with CHUBU Electric Power Co., Inc. we proved that SMES is valuable for compensating voltage dips. Since 2007, 10MVA SMES improved from field test machines has been running in a domestic liquid crystal display plant, and in 2008, it protected plant loads from a number of voltage dips. In this paper, we report the action principle and components of the improved SMES for voltage dip compensation, and examples of waveforms when 10MVA SMES compensated voltage dips.

  18. A Compressive Superresolution Display

    KAUST Repository

    Heide, Felix

    2014-06-22

    In this paper, we introduce a new compressive display architecture for superresolution image presentation that exploits co-design of the optical device configuration and compressive computation. Our display allows for superresolution, HDR, or glasses-free 3D presentation.

  19. Lunar Sample Display Locations

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA provides a number of lunar samples for display at museums, planetariums, and scientific expositions around the world. Lunar displays are open to the public....

  20. Theory of reproducing kernels and applications

    CERN Document Server

    Saitoh, Saburou

    2016-01-01

    This book provides a large extension of the general theory of reproducing kernels published by N. Aronszajn in 1950, with many concrete applications. In Chapter 1, many concrete reproducing kernels are first introduced with detailed information. Chapter 2 presents a general and global theory of reproducing kernels with basic applications in a self-contained way. Many fundamental operations among reproducing kernel Hilbert spaces are dealt with. Chapter 2 is the heart of this book. Chapter 3 is devoted to the Tikhonov regularization using the theory of reproducing kernels with applications to numerical and practical solutions of bounded linear operator equations. In Chapter 4, the numerical real inversion formulas of the Laplace transform are presented by applying the Tikhonov regularization, where the reproducing kernels play a key role in the results. Chapter 5 deals with ordinary differential equations; Chapter 6 includes many concrete results for various fundamental partial differential equations. In Chapt...

  1. Filters, reproducing kernel, and adaptive meshfree method

    Science.gov (United States)

    You, Y.; Chen, J.-S.; Lu, H.

    Reproducing kernel, with its intrinsic feature of moving averaging, can be utilized as a low-pass filter with scale decomposition capability. The discrete convolution of two nth order reproducing kernels with arbitrary support size in each kernel results in a filtered reproducing kernel function that has the same reproducing order. This property is utilized to separate the numerical solution into an unfiltered lower order portion and a filtered higher order portion. As such, the corresponding high-pass filter of this reproducing kernel filter can be used to identify the locations of high gradient, and consequently serves as an operator for error indication in meshfree analysis. In conjunction with the naturally conforming property of the reproducing kernel approximation, a meshfree adaptivity method is also proposed.

  2. Examination of reproducibility in microbiological degredation experiments

    DEFF Research Database (Denmark)

    Sommer, Helle Mølgaard; Spliid, Henrik; Holst, Helle

    1998-01-01

    Experimental data indicate that certain microbiological degradation experiments have a limited reproducibility. Nine identical batch experiments were carried out on 3 different days to examine reproducibility. A pure culture, isolated from soil, grew with toluene as the only carbon and energy sou....... The limited reproducibility may be caused by variability in the preculture, or more precisely, variations in the physiological state of the bacteria in the precultures just before used as inoculum....

  3. High Voltage Distribution

    Science.gov (United States)

    Norbeck, Edwin; Miller, Michael; Onel, Yasar

    2010-11-01

    For detector arrays that require 5 to 10 kV at a few microamps each for hundreds of detectors, using hundreds of HV power supplies is unreasonable. Bundles of hundreds of HV cables take up space that should be filled with detectors. A typical HV module can supply 1 ma, enough current for hundreds of detectors. It is better to use a single HV module and distribute the current as needed. We show a circuit that, for each detector, measures the current, cuts off the voltage if the current exceeds a set maximum, and allows the HV to be turned on or off from a control computer. The entire array requires a single HV cable and 2 or 3 control lines. This design provides the same voltage to all of the detectors, the voltage set by the single HV module. Some additional circuitry would allow a computer controlled voltage drop between the HV and each individual detector.

  4. Invisible Display in Aluminum

    DEFF Research Database (Denmark)

    Prichystal, Jan Phuklin; Hansen, Hans Nørgaard; Bladt, Henrik Henriksen

    2005-01-01

    Bang & Olufsen a/s has been working with ideas for invisible integration of displays in metal surfaces. Invisible integration of information displays traditionally has been possible by placing displays behind transparent or semitransparent materials such as plastic or glass. The wish for an integ...... be obtained by shining light from the backside of the workpiece. When there is no light from the backside, the front surface seems totally untouched. This was achieved by laser ablation with ultra-short pulses.......Bang & Olufsen a/s has been working with ideas for invisible integration of displays in metal surfaces. Invisible integration of information displays traditionally has been possible by placing displays behind transparent or semitransparent materials such as plastic or glass. The wish...... for an integrated display in a metal surface is often ruled by design and functionality of a product. The integration of displays in metal surfaces requires metal removal in order to clear the area of the display to some extent. The idea behind an invisible display in Aluminum concerns the processing of a metal...

  5. High voltage engineering fundamentals

    CERN Document Server

    Kuffel, E; Hammond, P

    1984-01-01

    Provides a comprehensive treatment of high voltage engineering fundamentals at the introductory and intermediate levels. It covers: techniques used for generation and measurement of high direct, alternating and surge voltages for general application in industrial testing and selected special examples found in basic research; analytical and numerical calculation of electrostatic fields in simple practical insulation system; basic ionisation and decay processes in gases and breakdown mechanisms of gaseous, liquid and solid dielectrics; partial discharges and modern discharge detectors; and over

  6. Reproducibility principles, problems, practices, and prospects

    CERN Document Server

    Maasen, Sabine

    2016-01-01

    Featuring peer-reviewed contributions from noted experts in their fields of research, Reproducibility: Principles, Problems, Practices, and Prospects presents state-of-the-art approaches to reproducibility, the gold standard sound science, from multi- and interdisciplinary perspectives. Including comprehensive coverage for implementing and reflecting the norm of reproducibility in various pertinent fields of research, the book focuses on how the reproducibility of results is applied, how it may be limited, and how such limitations can be understood or even controlled in the natural sciences, computational sciences, life sciences, social sciences, and studies of science and technology. The book presents many chapters devoted to a variety of methods and techniques, as well as their epistemic and ontological underpinnings, which have been developed to safeguard reproducible research and curtail deficits and failures. The book also investigates the political, historical, and social practices that underlie repro...

  7. Explorations in statistics: statistical facets of reproducibility.

    Science.gov (United States)

    Curran-Everett, Douglas

    2016-06-01

    Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This eleventh installment of Explorations in Statistics explores statistical facets of reproducibility. If we obtain an experimental result that is scientifically meaningful and statistically unusual, we would like to know that our result reflects a general biological phenomenon that another researcher could reproduce if (s)he repeated our experiment. But more often than not, we may learn this researcher cannot replicate our result. The National Institutes of Health and the Federation of American Societies for Experimental Biology have created training modules and outlined strategies to help improve the reproducibility of research. These particular approaches are necessary, but they are not sufficient. The principles of hypothesis testing and estimation are inherent to the notion of reproducibility in science. If we want to improve the reproducibility of our research, then we need to rethink how we apply fundamental concepts of statistics to our science.

  8. Low-voltage gyrotrons

    Science.gov (United States)

    Glyavin, M. Yu.; Zavolskiy, N. A.; Sedov, A. S.; Nusinovich, G. S.

    2013-03-01

    For a long time, the gyrotrons were primarily developed for electron cyclotron heating and current drive of plasmas in controlled fusion reactors where a multi-megawatt, quasi-continuous millimeter-wave power is required. In addition to this important application, there are other applications (and their number increases with time) which do not require a very high power level, but such issues as the ability to operate at low voltages and have compact devices are very important. For example, gyrotrons are of interest for a dynamic nuclear polarization, which improves the sensitivity of the nuclear magnetic resonance spectroscopy. In this paper, some issues important for operation of gyrotrons driven by low-voltage electron beams are analyzed. An emphasis is made on the efficiency of low-voltage gyrotron operation at the fundamental and higher cyclotron harmonics. These efficiencies calculated with the account for ohmic losses were, first, determined in the framework of the generalized gyrotron theory based on the cold-cavity approximation. Then, more accurate, self-consistent calculations for the fundamental and second harmonic low-voltage sub-THz gyrotron designs were carried out. Results of these calculations are presented and discussed. It is shown that operation of the fundamental and second harmonic gyrotrons with noticeable efficiencies is possible even at voltages as low as 5-10 kV. Even the third harmonic gyrotrons can operate at voltages about 15 kV, albeit with rather low efficiency (1%-2% in the submillimeter wavelength region).

  9. Touch sensitive electrorheological fluid based tactile display

    Science.gov (United States)

    Liu, Yanju; Davidson, Rob; Taylor, Paul

    2005-12-01

    A tactile display is programmable device whose controlled surface is intended to be investigated by human touch. It has a great number of potential applications in the field of virtual reality and elsewhere. In this research, a 5 × 5 tactile display array including electrorheological (ER) fluid has been developed and investigated. Force responses of the tactile display array have been measured while a probe was moved across the upper surface. The purpose of this was to simulate the action of touch performed by human finger. Experimental results show that the sensed surface information could be controlled effectively by adjusting the voltage activation pattern imposed on the tactels. The performance of the tactile display is durable and repeatable. The touch sensitivity of this ER fluid based tactile display array has also been investigated in this research. The results show that it is possible to sense the touching force normal to the display's surface by monitoring the change of current passing through the ER fluid. These encouraging results are helpful for constructing a new type of tactile display based on ER fluid which can act as both sensor and actuator at the same time.

  10. Polyplanar optic display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.; Biscardi, C.; Brewster, C.; DeSanto, L. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology; Beiser, L. [Leo Beiser Inc., Flushing, NY (United States)

    1997-07-01

    The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 100 milliwatt green solid state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the electronic interfacing to the DLP{trademark} chip, the opto-mechanical design and viewing angle characteristics.

  11. OLED displays and lighting

    CERN Document Server

    Koden, Mitsuhiro

    2017-01-01

    Organic light-emitting diodes (OLEDs) have emerged as the leading technology for the new display and lighting market. OLEDs are solid-state devices composed of thin films of organic molecules that create light with the application of electricity. OLEDs can provide brighter, crisper displays on electronic devices and use less power than conventional light-emitting diodes (LEDs) or liquid crystal displays (LCDs) used today. This book covers both the fundamentals and practical applications of flat and flexible OLEDs.

  12. Scalable Resolution Display Walls

    KAUST Repository

    Leigh, Jason

    2013-01-01

    This article will describe the progress since 2000 on research and development in 2-D and 3-D scalable resolution display walls that are built from tiling individual lower resolution flat panel displays. The article will describe approaches and trends in display hardware construction, middleware architecture, and user-interaction design. The article will also highlight examples of use cases and the benefits the technology has brought to their respective disciplines. © 1963-2012 IEEE.

  13. JAVA Stereo Display Toolkit

    Science.gov (United States)

    Edmonds, Karina

    2008-01-01

    This toolkit provides a common interface for displaying graphical user interface (GUI) components in stereo using either specialized stereo display hardware (e.g., liquid crystal shutter or polarized glasses) or anaglyph display (red/blue glasses) on standard workstation displays. An application using this toolkit will work without modification in either environment, allowing stereo software to reach a wider audience without sacrificing high-quality display on dedicated hardware. The toolkit is written in Java for use with the Swing GUI Toolkit and has cross-platform compatibility. It hooks into the graphics system, allowing any standard Swing component to be displayed in stereo. It uses the OpenGL graphics library to control the stereo hardware and to perform the rendering. It also supports anaglyph and special stereo hardware using the same API (application-program interface), and has the ability to simulate color stereo in anaglyph mode by combining the red band of the left image with the green/blue bands of the right image. This is a low-level toolkit that accomplishes simply the display of components (including the JadeDisplay image display component). It does not include higher-level functions such as disparity adjustment, 3D cursor, or overlays all of which can be built using this toolkit.

  14. Device for monitoring cell voltage

    Science.gov (United States)

    Doepke, Matthias [Garbsen, DE; Eisermann, Henning [Edermissen, DE

    2012-08-21

    A device for monitoring a rechargeable battery having a number of electrically connected cells includes at least one current interruption switch for interrupting current flowing through at least one associated cell and a plurality of monitoring units for detecting cell voltage. Each monitoring unit is associated with a single cell and includes a reference voltage unit for producing a defined reference threshold voltage and a voltage comparison unit for comparing the reference threshold voltage with a partial cell voltage of the associated cell. The reference voltage unit is electrically supplied from the cell voltage of the associated cell. The voltage comparison unit is coupled to the at least one current interruption switch for interrupting the current of at least the current flowing through the associated cell, with a defined minimum difference between the reference threshold voltage and the partial cell voltage.

  15. High voltage pulse generator

    Science.gov (United States)

    Fasching, George E.

    1977-03-08

    An improved high-voltage pulse generator has been provided which is especially useful in ultrasonic testing of rock core samples. An N number of capacitors are charged in parallel to V volts and at the proper instance are coupled in series to produce a high-voltage pulse of N times V volts. Rapid switching of the capacitors from the paralleled charging configuration to the series discharging configuration is accomplished by using silicon-controlled rectifiers which are chain self-triggered following the initial triggering of a first one of the rectifiers connected between the first and second of the plurality of charging capacitors. A timing and triggering circuit is provided to properly synchronize triggering pulses to the first SCR at a time when the charging voltage is not being applied to the parallel-connected charging capacitors. Alternate circuits are provided for controlling the application of the charging voltage from a charging circuit to be applied to the parallel capacitors which provides a selection of at least two different intervals in which the charging voltage is turned "off" to allow the SCR's connecting the capacitors in series to turn "off" before recharging begins. The high-voltage pulse-generating circuit including the N capacitors and corresponding SCR's which connect the capacitors in series when triggered "on" further includes diodes and series-connected inductors between the parallel-connected charging capacitors which allow sufficiently fast charging of the capacitors for a high pulse repetition rate and yet allow considerable control of the decay time of the high-voltage pulses from the pulse-generating circuit.

  16. Learning Reproducibility with a Yearly Networking Contest

    KAUST Repository

    Canini, Marco

    2017-08-10

    Better reproducibility of networking research results is currently a major goal that the academic community is striving towards. This position paper makes the case that improving the extent and pervasiveness of reproducible research can be greatly fostered by organizing a yearly international contest. We argue that holding a contest undertaken by a plurality of students will have benefits that are two-fold. First, it will promote hands-on learning of skills that are helpful in producing artifacts at the replicable-research level. Second, it will advance the best practices regarding environments, testbeds, and tools that will aid the tasks of reproducibility evaluation committees by and large.

  17. Thou Shalt Be Reproducible! A Technology Perspective

    Directory of Open Access Journals (Sweden)

    Patrick Mair

    2016-07-01

    Full Text Available This article elaborates on reproducibility in psychology from a technological viewpoint. Modernopen source computational environments are shown and explained that foster reproducibilitythroughout the whole research life cycle, and to which emerging psychology researchers shouldbe sensitized, are shown and explained. First, data archiving platforms that make datasets publiclyavailable are presented. Second, R is advocated as the data-analytic lingua franca in psychologyfor achieving reproducible statistical analysis. Third, dynamic report generation environments forwriting reproducible manuscripts that integrate text, data analysis, and statistical outputs such asfigures and tables in a single document are described. Supplementary materials are provided inorder to get the reader started with these technologies.

  18. The Economics of Reproducibility in Preclinical Research.

    Directory of Open Access Journals (Sweden)

    Leonard P Freedman

    2015-06-01

    Full Text Available Low reproducibility rates within life science research undermine cumulative knowledge production and contribute to both delays and costs of therapeutic drug development. An analysis of past studies indicates that the cumulative (total prevalence of irreproducible preclinical research exceeds 50%, resulting in approximately US$28,000,000,000 (US$28B/year spent on preclinical research that is not reproducible-in the United States alone. We outline a framework for solutions and a plan for long-term improvements in reproducibility rates that will help to accelerate the discovery of life-saving therapies and cures.

  19. Standardizing visual display quality

    NARCIS (Netherlands)

    Besuijen, Ko; Spenkelink, Gerd P.J.

    1998-01-01

    The current ISO 9241–3 standard for visual display quality and the proposed user performance tests are reviewed. The standard is found to be more engineering than ergonomic and problems with system configuration, software applications, display settings, user behaviour, wear and physical environment

  20. Polyplanar optical display electronics

    Energy Technology Data Exchange (ETDEWEB)

    DeSanto, L.; Biscardi, C. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology

    1997-07-01

    The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. The prototype ten inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a 100 milliwatt green solid-state laser (10,000 hr. life) at 532 nm as its light source. To produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments. In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the Digital Micromirror Device (DMD{trademark}) circuit board is removed from the Texas Instruments DLP light engine assembly. Due to the compact architecture of the projection system within the display chassis, the DMD{trademark} chip is operated remotely from the Texas Instruments circuit board. The authors discuss the operation of the DMD{trademark} divorced from the light engine and the interfacing of the DMD{trademark} board with various video formats (CVBS, Y/C or S-video and RGB) including the format specific to the B-52 aircraft. A brief discussion of the electronics required to drive the laser is also presented.

  1. Helmet-Mounted Displays (HMD)

    Data.gov (United States)

    Federal Laboratory Consortium — The Helmet-Mounted Display labis responsible for monocular HMD day display evaluations; monocular HMD night vision performance processes; binocular HMD day display...

  2. Visual merchandising window display

    Directory of Open Access Journals (Sweden)

    Opris (Cas. Stanila M.

    2013-12-01

    Full Text Available Window display plays a major part in the selling strategies; it does not only include the simple display of goods, nowadays it is a form of art, also having the purpose of sustaining the brand image. This article wants to reveal the tools that are essential in creating a fabulous window display. Being a window designer is not an easy job, you have to always think ahead trends, to have a sense of colour, to know how to use light to attract customers in the store after only one glance at the window. The big store window displays are theatre scenes: with expensive backgrounds, special effects and high fashion mannequins. The final role of the displays is to convince customers to enter the store and trigger the purchasing act which is the final goal of the retail activity.

  3. Reproducibility Experiment of OSL and TL Dosimeter

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Reproducibility is an important property of personal dosimeter. It not only can indicate the stability of dosimeter, appraise the precision and accuracy of measured value, but also can evaluate the

  4. Reproducible statistical analysis with multiple languages

    DEFF Research Database (Denmark)

    Lenth, Russell; Højsgaard, Søren

    2011-01-01

    This paper describes the system for making reproducible statistical analyses. differs from other systems for reproducible analysis in several ways. The two main differences are: (1) Several statistics programs can be in used in the same document. (2) Documents can be prepared using OpenOffice or ......This paper describes the system for making reproducible statistical analyses. differs from other systems for reproducible analysis in several ways. The two main differences are: (1) Several statistics programs can be in used in the same document. (2) Documents can be prepared using Open......Office or \\LaTeX. The main part of this paper is an example showing how to use and together in an OpenOffice text document. The paper also contains some practical considerations on the use of literate programming in statistics....

  5. Reproducible research in vadose zone sciences

    Science.gov (United States)

    A significant portion of present-day soil and Earth science research is computational, involving complex data analysis pipelines, advanced mathematical and statistical models, and sophisticated computer codes. Opportunities for scientific progress are greatly diminished if reproducing and building o...

  6. Defense display market assessment

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1998-09-01

    This paper addresses the number, function and size of principal military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. Principal military displays are defined as those occupying appreciable crewstation real-estate and/or those without which the platform could not carry out its intended mission. DoD 'office' applications are excluded from this study. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, angle, color, video capability, and night vision imaging system (NVIS) compatibility. Funded, future acquisitions, planned and predicted crewstation modification kits, and form-fit upgrades are taken into account. This paper provides an overview of the DoD niche market, allowing both government and industry a necessary reference by which to meet DoD requirements for military displays in a timely and cost-effective manner. The aggregate DoD market for direct-view and large-area military displays is presently estimated to be in excess of 242,000. Miniature displays are those which must be magnified to be viewed, involve a significantly different manufacturing paradigm and are used in helmet mounted displays and thermal weapon sight applications. Some 114,000 miniature displays are presently included within Service weapon system acquisition plans. For vendor production planning purposes it is noted that foreign military sales could substantially increase these quantities. The vanishing vendor syndrome (VVS) for older display technologies continues to be a growing, pervasive problem throughout DoD, which consequently must leverage the more modern display technologies being developed for civil- commercial markets.

  7. Reproducibility of AMPLICOR enterovirus PCR test results.

    OpenAIRE

    1997-01-01

    The reproducibility of AMPLICOR enterovirus PCR test results was determined with clinical samples of cerebrospinal fluid, serum, urine, and throat and rectal swabs. Among 608 samples from which duplicate aliquots were run simultaneously, only seven pairs gave discordant results. Among 104 samples from which duplicate aliquots were run in separate assays, no discordance was seen. Overall, the reproducibility of test kit results was 99% (705 of 712).

  8. Voltage Regulators for Photovoltaic Systems

    Science.gov (United States)

    Delombard, R.

    1986-01-01

    Two simple circuits developed to provide voltage regulation for highvoltage (i.e., is greater than 75 volts) and low-voltage (i.e., is less than 36 volts) photovoltaic/battery power systems. Use of these circuits results in voltage regulator small, low-cost, and reliable, with very low power dissipation. Simple oscillator circuit controls photovoltaic-array current to regulate system voltage and control battery charging. Circuit senses battery (and system) voltage and adjusts array current to keep battery voltage from exceeding maximum voltage.

  9. Studying Voltage Transformer Ferroresonance

    Directory of Open Access Journals (Sweden)

    Hamid Radmanesh

    2012-09-01

    Full Text Available This study studies the effect of Circuit Breaker Shunt Resistance (CBSR, Metal Oxide Vaistor (MOV and Neutral earth Resistance (NR on the control of ferroresonance in the voltage transformer. It is expected that NR can controlled ferroresonance better than MOV and CBSR. Study has been done on a one phase voltage transformer rated 100 VA, 275 kV. The simulation results reveal that considering the CBSR and MOV exhibits a great mitigating effect on ferroresonance overvoltages, but these resistances cannot control these phenomena for all range of parameters. By applying NR to the system structure, ferroresonance has been controlled and its amplitude has been damped for all parameters values.

  10. Panoramic projection avionics displays

    Science.gov (United States)

    Kalmanash, Michael H.

    2003-09-01

    Avionics projection displays are entering production in advanced tactical aircraft. Early adopters of this technology in the avionics community used projection displays to replace or upgrade earlier units incorporating direct-view CRT or AMLCD devices. Typical motivation for these upgrades were the alleviation of performance, cost and display device availability concerns. In these systems, the upgraded (projection) displays were one-for-one form / fit replacements for the earlier units. As projection technology has matured, this situation has begun to evolve. The Lockheed-Martin F-35 is the first program in which the cockpit has been specifically designed to take advantage of one of the more unique capabilities of rear projection display technology, namely the ability to replace multiple small screens with a single large conformal viewing surface in the form of a panoramic display. Other programs are expected to follow, since the panoramic formats enable increased mission effectiveness, reduced cost and greater information transfer to the pilot. Some of the advantages and technical challenges associated with panoramic projection displays for avionics applications are described below.

  11. Reproducibility in Data-Scarce Environments

    Science.gov (United States)

    Darch, P. T.

    2016-12-01

    Among the usual requirements for reproducibility are large volumes of data and computationally intensive methods. Many fields within earth sciences, however, do not meet these requirements. Data are scarce and data-intensive methods are not well established. How can science be reproducible under these conditions? What changes, both infrastructural and cultural, are needed to advance reproducibility? This paper presents findings from a long-term social scientific case study of an emergent and data scarce field, the deep subseafloor biosphere. This field studies interactions between microbial communities living in the seafloor and the physical environments they inhabit. Factors such as these make reproducibility seem a distant goal for this community: - The relative newness of the field. Serious study began in the late 1990s; - The highly multidisciplinary nature of the field. Researchers come from a range of physical and life science backgrounds; - Data scarcity. Domain researchers produce much of these data in their own onshore laboratories by analyzing cores from international ocean drilling expeditions. Allocation of cores is negotiated between researchers from many fields. These factors interact in multiple ways to inhibit reproducibility: - Incentive structures emphasize producing new data and new knowledge rather than reanalysing extant data; - Only a few steps of laboratory analyses can be reproduced - such as analysis of DNA sequences, but not extraction of DNA from cores -, due to scarcity of cores; - Methodological heterogeneity is a consequence of multidisciplinarity, as researchers bring different techniques from diverse fields. - Few standards for data collection or analysis are available at this early stage of the field; - While datasets from multiple biological and physical phenomena can be integrated into a single workflow, curation tends to be divergent. Each type of dataset may be subject to different disparate policies and contributed to different

  12. VOLTAGE REGULATORS ASYNCHRONOUS GENERATORS

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2015-06-01

    Full Text Available A promising is currently the use of asynchronous generators with capacitive excitation as a source of electricity in stand-alone power systems. Drive asynchronous generators may exercise as a thermal engine and wind wheel wind power plant or turbines of small hydropower plants. The article discusses the structural and schematics of voltage stabilizers and frequency of asynchronous generators with improved operational and technical specifications. Technical novelty of design solutions of the magnetic system and stabilizers asynchronous generator of electricity parameters confirmed by the patents for the invention of the Russian Federation. The proposed technical solution voltage stabilizer asynchronous generators, can reduce the weight of the block capacitors excitation and reactive power compensation, as well as to simplify the control system power circuit which has less power electronic devices. For wind power plants it is an important issue not only to stabilize the voltage of the generator, but also the frequency of the current. Recommend functionality stabilizer schemes parameters of electric power made for direct frequency converters with artificial and natural switching power electronic devices. It is also proposed as part of stabilization systems use single-phase voltage, three-phase transformers with rotating magnetic field, reduce the level of electromagnetic interference generated by power electronic devices for switching, enhance the efficiency and reliability of the stabilizer.

  13. Geomagnetism and Induced Voltage

    Science.gov (United States)

    Abdul-Razzaq, W.; Biller, R. D.

    2010-01-01

    Introductory physics laboratories have seen an influx of "conceptual integrated science" over time in their classrooms with elements of other sciences such as chemistry, biology, Earth science, and astronomy. We describe a laboratory to introduce this development, as it attracts attention to the voltage induced in the human brain as it…

  14. Small - Display Cartography

    DEFF Research Database (Denmark)

    Nissen, Flemming; Hvas, Anders; Münster-Swendsen, Jørgen

    This report comprises the work carried out in the work-package of small display cartography. The work-package has aimed at creating a general framework for the small-display cartography. A solid framework facilitates an increased use of spatial data in mobile devices - thus enabling, together...... with the rapidly evolving positioning techniques, a new category of position-dependent, map-based services to be introduced. The report consists of the following parts: Part I: Categorization of handheld devices, Part II: Cartographic design for small-display devices, Part III: Study on the GiMoDig Client ? Portal...... Service Communication and finally, Part IV: Concluding remarks and topics for further research on small-display cartography. Part II includes a separate Appendix D consisting of a cartographic design specification. Part III includes a separate Appendix C consisting of a schema specification, a separate...

  15. Flexible displays, rigid designs?

    DEFF Research Database (Denmark)

    Hornbæk, Kasper

    2015-01-01

    Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs....

  16. Liquid Crystal Airborne Display

    Science.gov (United States)

    1977-08-01

    81/2X 11- 10 -9 .8 display using a large advertising alphanimeric ( TCI ) has been added to the front of the optical box used in the F-4 aircraft for HUD...properties over a wide range of tempera - tures, including normal room temperature. What are Liquid Crystals? Liquid crystals have been classified in three...natic fanctions and to present data needed for the semi- automatic and manual control of system functions. Existing aircraft using CRT display

  17. Military display performance parameters

    Science.gov (United States)

    Desjardins, Daniel D.; Meyer, Frederick

    2012-06-01

    The military display market is analyzed in terms of four of its segments: avionics, vetronics, dismounted soldier, and command and control. Requirements are summarized for a number of technology-driving parameters, to include luminance, night vision imaging system compatibility, gray levels, resolution, dimming range, viewing angle, video capability, altitude, temperature, shock and vibration, etc., for direct-view and virtual-view displays in cockpits and crew stations. Technical specifications are discussed for selected programs.

  18. Raster graphics display library

    Science.gov (United States)

    Grimsrud, Anders; Stephenson, Michael B.

    1987-01-01

    The Raster Graphics Display Library (RGDL) is a high level subroutine package that give the advanced raster graphics display capabilities needed. The RGDL uses FORTRAN source code routines to build subroutines modular enough to use as stand-alone routines in a black box type of environment. Six examples are presented which will teach the use of RGDL in the fastest, most complete way possible. Routines within the display library that are used to produce raster graphics are presented in alphabetical order, each on a separate page. Each user-callable routine is described by function and calling parameters. All common blocks that are used in the display library are listed and the use of each variable within each common block is discussed. A reference on the include files that are necessary to compile the display library is contained. Each include file and its purpose are listed. The link map for MOVIE.BYU version 6, a general purpose computer graphics display system that uses RGDL software, is also contained.

  19. Reproducing Kernel for D2(Ω, ρ) and Metric Induced by Reproducing Kernel

    Institute of Scientific and Technical Information of China (English)

    ZHAO Zhen Gang

    2009-01-01

    An important property of the reproducing kernel of D2(Ω, ρ) is obtained and the reproducing kernels for D2(Ω, ρ) are calculated when Ω = Bn × Bn and ρ are some special functions. A reproducing kernel is used to construct a semi-positive definite matrix and a distance function defined on Ω×Ω. An inequality is obtained about the distance function and the pseudodistance induced by the matrix.

  20. Reproducibility, controllability, and optimization of LENR experiments

    Energy Technology Data Exchange (ETDEWEB)

    Nagel, David J. [The George Washington University, Washington DC 20052 (United States)

    2006-07-01

    Low-energy nuclear reaction (LENR) measurements are significantly, and increasingly reproducible. Practical control of the production of energy or materials by LENR has yet to be demonstrated. Minimization of costly inputs and maximization of desired outputs of LENR remain for future developments. The paper concludes by underlying that it is now clearly that demands for reproducible experiments in the early years of LENR experiments were premature. In fact, one can argue that irreproducibility should be expected for early experiments in a complex new field. As emphasized in the paper and as often happened in the history of science, experimental and theoretical progress can take even decades. It is likely to be many years before investments in LENR experiments will yield significant returns, even for successful research programs. However, it is clearly that a fundamental understanding of the anomalous effects observed in numerous experiments will significantly increase reproducibility, improve controllability, enable optimization of processes, and accelerate the economic viability of LENR.

  1. Reproducibility of surface roughness in reaming

    DEFF Research Database (Denmark)

    Müller, Pavel; De Chiffre, Leonardo

    concentration of the oil in water-based cutting fluid (or when using a straight mineral oil) results in surface profiles that are more reproducible at higher cutting speed. Moreover, it can be seen that three cutting fluids (two water-based cutting fluids with different oil concentration and a straight mineral......An investigation on the reproducibility of surface roughness in reaming was performed to document the applicability of this approach for testing cutting fluids. Austenitic stainless steel was used as a workpiece material and HSS reamers as cutting tools. Reproducibility of the results was evaluated...... oil) used in connection with a low cutting speed result in "identical" surface profiles. Biggest uncertainty contributors were due to the process repeatability and repeatability around the hole circumference. This was however only in the case of high cutting speeds and low degree of oil concentration...

  2. Reproducibility of operator processing for radiation dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Sui Shen; DeNardo, Gerald L.; DeNardo, Sally J.; Aina, Yuan; DeNardo, Diane A.; Lamborn, Kathleen R

    1997-01-01

    Reproducibility of operator processing for radiation dose and biological half-life was assessed for radioimmunotherapy. Mean coefficient of variation for intra-operator consecutive processing and for inter-operator processing was less than 15% for all tissues. The mean coefficient of variation for intra-operator processing over 2 wk or inter-operator processing comparing an experienced and less experienced operator was generally greater, and particularly so for tumors. Satisfactory reproducibility was achievable using visual determination of regions of interests after 80 h of training.

  3. Archiving Reproducible Research with R and Dataverse

    DEFF Research Database (Denmark)

    Leeper, Thomas

    2014-01-01

    Reproducible research and data archiving are increasingly important issues in research involving statistical analyses of quantitative data. This article introduces the dvn package, which allows R users to publicly archive datasets, analysis files, codebooks, and associated metadata in Dataverse...... Network online repositories, an open-source data archiving project sponsored by Harvard University. In this article I review the importance of data archiving in the context of reproducible research, introduce the Dataverse Network, explain the implementation of the dvn package, and provide example code...... for archiving and releasing data using the package....

  4. Archiving Reproducible Research with R and Dataverse

    DEFF Research Database (Denmark)

    Leeper, Thomas

    2014-01-01

    Reproducible research and data archiving are increasingly important issues in research involving statistical analyses of quantitative data. This article introduces the dvn package, which allows R users to publicly archive datasets, analysis files, codebooks, and associated metadata in Dataverse...... Network online repositories, an open-source data archiving project sponsored by Harvard University. In this article I review the importance of data archiving in the context of reproducible research, introduce the Dataverse Network, explain the implementation of the dvn package, and provide example code...

  5. Reproducible extracellular vesicle size and concentration determination with tunable resistive pulse sensing

    Directory of Open Access Journals (Sweden)

    Frank A. W. Coumans

    2014-12-01

    Full Text Available Introduction: The size of extracellular vesicles (EVs can be determined with a tunable resistive pulse sensor (TRPS. Because the sensing pore diameter varies from pore to pore, the minimum detectable diameter also varies. The aim of this study is to determine and improve the reproducibility of TRPS measurements. Methods: Experiments were performed with the qNano system (Izon using beads and a standard urine vesicle sample. With a combination of voltage and stretch that yields a high blockade height, we investigate whether the minimum detected diameter is more reproducible when we configure the instrument targeting (a fixed stretch and voltage, or (b fixed blockade height. Results: Daily measurements with a fixed stretch and voltage (n=102 on a standard urine sample show a minimum detected vesicle diameter of 128±19 nm [mean±standard deviation; coefficient of variation (CV 14.8%]. The vesicle concentration was 2.4·109±3.8·109 vesicles/mL (range 1.4·108–1.8·1010. When we compared setting a fixed stretch and voltage to setting a fixed blockade height on 3 different pores, we found a minimum detected vesicle diameter of 118 nm (CV 15.5%, stretch, and 123 nm (CV 4.5%, blockade height. The detected vesicle concentration was 3.2–8.2·108 vesicles/mL with fixed stretch and 6.4–7.8·108 vesicles/mL with fixed blockade height. Summary/conclusion: Pore-to-pore variability is the cause of the variation in minimum detected size when setting a fixed stretch and voltage. The reproducibility of the minimum detectable diameter is much improved by setting a fixed blockade height.

  6. Deployment of low-voltage regulator considering existing voltage control in medium-voltage distribution systems

    Directory of Open Access Journals (Sweden)

    Hiroshi Kikusato

    2016-01-01

    Full Text Available Many photovoltaic (PV systems have been installed in distribution systems. This installation complicates the maintenance of all voltages within the appropriate range in all low-voltage distribution systems (LVDSs because the trends in voltage fluctuation differ in each LVDS. The installation of a low-voltage regulator (LVR that can accordingly control the voltage in each LVDS has been studied as a solution to this problem. Voltage control in a medium-voltage distribution system must be considered to study the deployment of LVRs. In this study, we installed LVRs in the LVDSs in which the existing voltage-control scheme cannot prevent voltage deviation and performed a numerical simulation by using a distribution system model with PV to evaluate the deployment of the LVRs.

  7. Analyzing of Dynamic Voltage Restorer in Series Compensation Voltage

    Directory of Open Access Journals (Sweden)

    Naser Parhizgar

    2012-02-01

    Full Text Available The Dynamic Voltage Restorer (DVR is a series-connected compensator to generate a controllable voltage to against the short-term voltage disturbances. The technique of DVR is an effective and cost competitive approach to improve voltage quality at the load side. This study presents a single-phase and threephase DVR system with reduced switch-count topology to protect the sensitive load against abnormal voltage conditions. Most basic function, the DVR configuration consist of a two level Voltage Source Converter (VSC, a dc energy storage device, a coupling transformer Connected in shunt with the ac system This study presents the application of Dynamic Voltage Restorer (DVR on power distribution systems for mitigation of voltage sag at critical loads. DVR is one of the compensating types of custom power devices. The DVR, which is based on forced-commutated Voltage Source Converter (VSC has been proved suitable for the task of compensating voltage sags/swells. Simulation results are presented to illustrate and understand the performances of DVR in supporting load voltages under voltage sags/swells conditions.

  8. High Voltage Charge Pump

    KAUST Repository

    Emira, Ahmed A.

    2014-10-09

    Various embodiments of a high voltage charge pump are described. One embodiment is a charge pump circuit that comprises a plurality of switching stages each including a clock input, a clock input inverse, a clock output, and a clock output inverse. The circuit further comprises a plurality of pumping capacitors, wherein one or more pumping capacitors are coupled to a corresponding switching stage. The circuit also comprises a maximum selection circuit coupled to a last switching stage among the plurality of switching stages, the maximum selection circuit configured to filter noise on the output clock and the output clock inverse of the last switching stage, the maximum selection circuit further configured to generate a DC output voltage based on the output clock and the output clock inverse of the last switching stage.

  9. Increased voltage photovoltaic cell

    Science.gov (United States)

    Ross, B.; Bickler, D. B.; Gallagher, B. D. (Inventor)

    1985-01-01

    A photovoltaic cell, such as a solar cell, is provided which has a higher output voltage than prior cells. The improved cell includes a substrate of doped silicon, a first layer of silicon disposed on the substrate and having opposite doping, and a second layer of silicon carbide disposed on the first layer. The silicon carbide preferably has the same type of doping as the first layer.

  10. High Voltage Seismic Generator

    Science.gov (United States)

    Bogacz, Adrian; Pala, Damian; Knafel, Marcin

    2015-04-01

    This contribution describes the preliminary result of annual cooperation of three student research groups from AGH UST in Krakow, Poland. The aim of this cooperation was to develop and construct a high voltage seismic wave generator. Constructed device uses a high-energy electrical discharge to generate seismic wave in ground. This type of device can be applied in several different methods of seismic measurement, but because of its limited power it is mainly dedicated for engineering geophysics. The source operates on a basic physical principles. The energy is stored in capacitor bank, which is charged by two stage low to high voltage converter. Stored energy is then released in very short time through high voltage thyristor in spark gap. The whole appliance is powered from li-ion battery and controlled by ATmega microcontroller. It is possible to construct larger and more powerful device. In this contribution the structure of device with technical specifications is resented. As a part of the investigation the prototype was built and series of experiments conducted. System parameter was measured, on this basis specification of elements for the final device were chosen. First stage of the project was successful. It was possible to efficiently generate seismic waves with constructed device. Then the field test was conducted. Spark gap wasplaced in shallowborehole(0.5 m) filled with salt water. Geophones were placed on the ground in straight line. The comparison of signal registered with hammer source and sparker source was made. The results of the test measurements are presented and discussed. Analysis of the collected data shows that characteristic of generated seismic signal is very promising, thus confirms possibility of practical application of the new high voltage generator. The biggest advantage of presented device after signal characteristics is its size which is 0.5 x 0.25 x 0.2 m and weight approximately 7 kg. This features with small li-ion battery makes

  11. Inter-examiner reproducibility of tests for lumbar motor control

    Directory of Open Access Journals (Sweden)

    Elkjaer Arne

    2011-05-01

    Full Text Available Abstract Background Many studies show a relation between reduced lumbar motor control (LMC and low back pain (LBP. However, test circumstances vary and during test performance, subjects may change position. In other words, the reliability - i.e. reproducibility and validity - of tests for LMC should be based on quantitative data. This has not been considered before. The aim was to analyse the reproducibility of five different quantitative tests for LMC commonly used in daily clinical practice. Methods The five tests for LMC were: repositioning (RPS, sitting forward lean (SFL, sitting knee extension (SKE, and bent knee fall out (BKFO, all measured in cm, and leg lowering (LL, measured in mm Hg. A total of 40 subjects (14 males, 26 females 25 with and 15 without LBP, with a mean age of 46.5 years (SD 14.8, were examined independently and in random order by two examiners on the same day. LBP subjects were recruited from three physiotherapy clinics with a connection to the clinic's gym or back-school. Non-LBP subjects were recruited from the clinic's staff acquaintances, and from patients without LBP. Results The means and standard deviations for each of the tests were 0.36 (0.27 cm for RPS, 1.01 (0.62 cm for SFL, 0.40 (0.29 cm for SKE, 1.07 (0.52 cm for BKFO, and 32.9 (7.1 mm Hg for LL. All five tests for LMC had reproducibility with the following ICCs: 0.90 for RPS, 0.96 for SFL, 0.96 for SKE, 0.94 for BKFO, and 0.98 for LL. Bland and Altman plots showed that most of the differences between examiners A and B were less than 0.20 cm. Conclusion These five tests for LMC displayed excellent reproducibility. However, the diagnostic accuracy of these tests needs to be addressed in larger cohorts of subjects, establishing values for the normal population. Also cut-points between subjects with and without LBP must be determined, taking into account age, level of activity, degree of impairment and participation in sports. Whether reproducibility of these

  12. Voltage-Induced Effect on Resistance of C:N/Si Heterojunctions

    Institute of Scientific and Technical Information of China (English)

    GAO Xi-Li; ZHANG Xiao-Zhong; WAN Cai-Hua; WANG Ji-Min

    2012-01-01

    Nitrogen doped a-C/Silicon (a-C:N/Si) heterojunctions have been fabricated by using the pulsed laser deposition (PLD) technique and their current-voltage characteristics at various temperatures are investigated.For reverse applied voltages,a-C:N/Si heterojunctions exhibit metal-insulator transition characteristics and the transition temperature can be controlled by the applied voltages.After the excitation of repeated high reverse applied voltages,the current-voltage curves show obvious hysteresis behaviors at low temperatures.These hysteresis behaviors are reproducible and the ratio of the high/low resistance can be greater than 104.%Nitrogen doped a-C/Silicon (a-C:N/Si) heterojunctions have been fabricated by using the pulsed laser deposition (PLD) technique and their current-voltage characteristics at various temperatures are investigated. For reverse applied voltages, a-C.N/Si heterojunctions exhibit metal-insulator transition characteristics and the transition temperature can be controlled by the applied voltages. After the excitation of repeated high reverse applied voltages, the current-voltage curves show obvious hysteresis behaviors at low temperatures. These hysteresis behaviors are reproducible and the ratio of the high/low resistance can be greater than 104.

  13. Dynamic plasmonic colour display

    Science.gov (United States)

    Duan, Xiaoyang; Kamin, Simon; Liu, Na

    2017-02-01

    Plasmonic colour printing based on engineered metasurfaces has revolutionized colour display science due to its unprecedented subwavelength resolution and high-density optical data storage. However, advanced plasmonic displays with novel functionalities including dynamic multicolour printing, animations, and highly secure encryption have remained in their infancy. Here we demonstrate a dynamic plasmonic colour display technique that enables all the aforementioned functionalities using catalytic magnesium metasurfaces. Controlled hydrogenation and dehydrogenation of the constituent magnesium nanoparticles, which serve as dynamic pixels, allow for plasmonic colour printing, tuning, erasing and restoration of colour. Different dynamic pixels feature distinct colour transformation kinetics, enabling plasmonic animations. Through smart material processing, information encoded on selected pixels, which are indiscernible to both optical and scanning electron microscopies, can only be read out using hydrogen as a decoding key, suggesting a new generation of information encryption and anti-counterfeiting applications.

  14. The Ultimate Display

    CERN Document Server

    Fluke, C J

    2016-01-01

    Astronomical images and datasets are increasingly high-resolution and multi-dimensional. The vast majority of astronomers perform all of their visualisation and analysis tasks on low-resolution, two-dimensional desktop monitors. If there were no technological barriers to designing the ultimate stereoscopic display for astronomy, what would it look like? What capabilities would we require of our compute hardware to drive it? And are existing technologies even close to providing a true 3D experience that is compatible with the depth resolution of human stereoscopic vision? We consider the CAVE2 (an 80 Megapixel, hybrid 2D and 3D virtual reality environment directly integrated with a 100 Tflop/s GPU-powered supercomputer) and the Oculus Rift (a low- cost, head-mounted display) as examples at opposite financial ends of the immersive display spectrum.

  15. Hyperbolic L2-modules with Reproducing Kernels

    Institute of Scientific and Technical Information of China (English)

    David EELPODE; Frank SOMMEN

    2006-01-01

    Abstract In this paper, the Dirac operator on the Klein model for the hyperbolic space is considered. A function space containing L2-functions on the sphere Sm-1 in (R)m, which are boundary values of solutions for this operator, is defined, and it is proved that this gives rise to a Hilbert module with a reproducing kernel.

  16. Estimating the reproducibility of psychological science

    NARCIS (Netherlands)

    Anderson, Joanna E.; Aarts, Alexander A.; Anderson, Christopher J.; Attridge, Peter R.; Attwood, Angela; Axt, Jordan; Babel, Molly; Bahník, Štěpán; Baranski, Erica; Barnett-Cowan, Michael; Bartmess, Elizabeth; Beer, Jennifer; Bell, Raoul; Bentley, Heather; Beyan, Leah; Binion, Grace; Borsboom, Denny; Bosch, Annick; Bosco, Frank A.; Bowman, Sara D.; Brandt, Mark J.; Braswell, Erin; Brohmer, Hilmar; Brown, Benjamin T.; Brown, Kristina; Brüning, Jovita; Calhoun-Sauls, Ann; Callahan, Shannon P.; Chagnon, Elizabeth; Chandler, Jesse; Chartier, Christopher R.; Cheung, Felix; Christopherson, Cody D.; Cillessen, Linda; Clay, Russ; Cleary, Hayley; Cloud, Mark D.; Conn, Michael; Cohoon, Johanna; Columbus, Simon; Cordes, Andreas; Costantini, Giulio; Alvarez, Leslie D Cramblet; Cremata, Ed; Crusius, Jan; DeCoster, Jamie; DeGaetano, Michelle A.; Penna, Nicolás Delia; Den Bezemer, Bobby; Deserno, Marie K.; Devitt, Olivia; Dewitte, Laura; Dobolyi, David G.; Dodson, Geneva T.; Donnellan, M. Brent; Donohue, Ryan; Dore, Rebecca A.; Dorrough, Angela; Dreber, Anna; Dugas, Michelle; Dunn, Elizabeth W.; Easey, Kayleigh; Eboigbe, Sylvia; Eggleston, Casey; Embley, Jo; Epskamp, Sacha; Errington, Timothy M.; Estel, Vivien; Farach, Frank J.; Feather, Jenelle; Fedor, Anna; Fernández-Castilla, Belén; Fiedler, Susann; Field, James G.; Fitneva, Stanka A.; Flagan, Taru; Forest, Amanda L.; Forsell, Eskil; Foster, Joshua D.; Frank, Michael C.; Frazier, Rebecca S.; Fuchs, Heather; Gable, Philip; Galak, Jeff; Galliani, Elisa Maria; Gampa, Anup; Garcia, Sara; Gazarian, Douglas; Gilbert, Elizabeth; Giner-Sorolla, Roger; Glöckner, Andreas; Goellner, Lars; Goh, Jin X.; Goldberg, Rebecca; Goodbourn, Patrick T.; Gordon-McKeon, Shauna; Gorges, Bryan; Gorges, Jessie; Goss, Justin; Graham, Jesse; Grange, James A.; Gray, Jeremy; Hartgerink, Chris; Hartshorne, Joshua; Hasselman, Fred; Hayes, Timothy; Heikensten, Emma; Henninger, Felix; Hodsoll, John; Holubar, Taylor; Hoogendoorn, Gea; Humphries, Denise J.; Hung, Cathy O Y; Immelman, Nathali; Irsik, Vanessa C.; Jahn, Georg; Jäkel, Frank; Jekel, Marc; Johannesson, Magnus; Johnson, Larissa G.; Johnson, David J.; Johnson, Kate M.; Johnston, William J.; Jonas, Kai; Joy-Gaba, Jennifer A.; Kappes, Heather Barry; Kelso, Kim; Kidwell, Mallory C.; Kim, Seung Kyung; Kirkhart, Matthew; Kleinberg, Bennett; Knežević, Goran; Kolorz, Franziska Maria; Kossakowski, Jolanda J.; Krause, Robert Wilhelm; Krijnen, Job; Kuhlmann, Tim; Kunkels, Yoram K.; Kyc, Megan M.; Lai, Calvin K.; Laique, Aamir; Lakens, Daniël|info:eu-repo/dai/nl/298811855; Lane, Kristin A.; Lassetter, Bethany; Lazarević, Ljiljana B.; Le Bel, Etienne P.; Lee, Key Jung; Lee, Minha; Lemm, Kristi; Levitan, Carmel A.; Lewis, Melissa; Lin, Lin; Lin, Stephanie; Lippold, Matthias; Loureiro, Darren; Luteijn, Ilse; MacKinnon, Sean; Mainard, Heather N.; Marigold, Denise C.; Martin, Daniel P.; Martinez, Tylar; Masicampo, E. J.; Matacotta, Josh; Mathur, Maya; May, Michael; Mechin, Nicole; Mehta, Pranjal; Meixner, Johannes; Melinger, Alissa; Miller, Jeremy K.; Miller, Mallorie; Moore, Katherine; Möschl, Marcus; Motyl, Matt; Müller, Stephanie M.; Munafo, Marcus; Neijenhuijs, Koen I.; Nervi, Taylor; Nicolas, Gandalf; Nilsonne, Gustav; Nosek, Brian A.; Nuijten, Michèle B.; Olsson, Catherine; Osborne, Colleen; Ostkamp, Lutz; Pavel, Misha; Penton-Voak, Ian S.; Perna, Olivia; Pernet, Cyril; Perugini, Marco; Pipitone, R. Nathan; Pitts, Michael; Plessow, Franziska; Prenoveau, Jason M.; Rahal, Rima Maria; Ratliff, Kate A.; Reinhard, David; Renkewitz, Frank; Ricker, Ashley A.; Rigney, Anastasia; Rivers, Andrew M.; Roebke, Mark; Rutchick, Abraham M.; Ryan, Robert S.; Sahin, Onur; Saide, Anondah; Sandstrom, Gillian M.; Santos, David; Saxe, Rebecca; Schlegelmilch, René; Schmidt, Kathleen; Scholz, Sabine; Seibel, Larissa; Selterman, Dylan Faulkner; Shaki, Samuel; Simpson, William B.; Sinclair, H. Colleen; Skorinko, Jeanine L M; Slowik, Agnieszka; Snyder, Joel S.; Soderberg, Courtney; Sonnleitner, Carina; Spencer, Nick; Spies, Jeffrey R.; Steegen, Sara; Stieger, Stefan; Strohminger, Nina; Sullivan, Gavin B.; Talhelm, Thomas; Tapia, Megan; Te Dorsthorst, Anniek; Thomae, Manuela; Thomas, Sarah L.; Tio, Pia; Traets, Frits; Tsang, Steve; Tuerlinckx, Francis; Turchan, Paul; Valášek, Milan; Van't Veer, Anna E.; Van Aert, Robbie; Van Assen, Marcel|info:eu-repo/dai/nl/407629971; Van Bork, Riet; Van De Ven, Mathijs; Van Den Bergh, Don; Van Der Hulst, Marije; Van Dooren, Roel; Van Doorn, Johnny; Van Renswoude, Daan R.; Van Rijn, Hedderik; Vanpaemel, Wolf; Echeverría, Alejandro Vásquez; Vazquez, Melissa; Velez, Natalia; Vermue, Marieke; Verschoor, Mark; Vianello, Michelangelo; Voracek, Martin; Vuu, Gina; Wagenmakers, Eric Jan; Weerdmeester, Joanneke; Welsh, Ashlee; Westgate, Erin C.; Wissink, Joeri; Wood, Michael; Woods, Andy; Wright, Emily; Wu, Sining; Zeelenberg, Marcel; Zuni, Kellylynn

    2015-01-01

    Reproducibility is a defining feature of science, but the extent to which it characterizes current research is unknown. We conducted replications of 100 experimental and correlational studies published in three psychology journals using high-powered designs and original materials when available. Rep

  17. Estimating the reproducibility of psychological science

    NARCIS (Netherlands)

    Anderson, Joanna E.; Aarts, Alexander A.; Anderson, Christopher J.; Attridge, Peter R.; Attwood, Angela; Axt, Jordan; Babel, Molly; Bahník, Štěpán; Baranski, Erica; Barnett-Cowan, Michael; Bartmess, Elizabeth; Beer, Jennifer; Bell, Raoul; Bentley, Heather; Beyan, Leah; Binion, Grace; Borsboom, Denny; Bosch, Annick; Bosco, Frank A.; Bowman, Sara D.; Brandt, Mark J.; Braswell, Erin; Brohmer, Hilmar; Brown, Benjamin T.; Brown, Kristina; Brüning, Jovita; Calhoun-Sauls, Ann; Callahan, Shannon P.; Chagnon, Elizabeth; Chandler, Jesse; Chartier, Christopher R.; Cheung, Felix; Christopherson, Cody D.; Cillessen, Linda; Clay, Russ; Cleary, Hayley; Cloud, Mark D.; Conn, Michael; Cohoon, Johanna; Columbus, Simon; Cordes, Andreas; Costantini, Giulio; Alvarez, Leslie D Cramblet; Cremata, Ed; Crusius, Jan; DeCoster, Jamie; DeGaetano, Michelle A.; Penna, Nicolás Delia; Den Bezemer, Bobby; Deserno, Marie K.; Devitt, Olivia; Dewitte, Laura; Dobolyi, David G.; Dodson, Geneva T.; Donnellan, M. Brent; Donohue, Ryan; Dore, Rebecca A.; Dorrough, Angela; Dreber, Anna; Dugas, Michelle; Dunn, Elizabeth W.; Easey, Kayleigh; Eboigbe, Sylvia; Eggleston, Casey; Embley, Jo; Epskamp, Sacha; Errington, Timothy M.; Estel, Vivien; Farach, Frank J.; Feather, Jenelle; Fedor, Anna; Fernández-Castilla, Belén; Fiedler, Susann; Field, James G.; Fitneva, Stanka A.; Flagan, Taru; Forest, Amanda L.; Forsell, Eskil; Foster, Joshua D.; Frank, Michael C.; Frazier, Rebecca S.; Fuchs, Heather; Gable, Philip; Galak, Jeff; Galliani, Elisa Maria; Gampa, Anup; Garcia, Sara; Gazarian, Douglas; Gilbert, Elizabeth; Giner-Sorolla, Roger; Glöckner, Andreas; Goellner, Lars; Goh, Jin X.; Goldberg, Rebecca; Goodbourn, Patrick T.; Gordon-McKeon, Shauna; Gorges, Bryan; Gorges, Jessie; Goss, Justin; Graham, Jesse; Grange, James A.; Gray, Jeremy; Hartgerink, Chris; Hartshorne, Joshua; Hasselman, Fred; Hayes, Timothy; Heikensten, Emma; Henninger, Felix; Hodsoll, John; Holubar, Taylor; Hoogendoorn, Gea; Humphries, Denise J.; Hung, Cathy O Y; Immelman, Nathali; Irsik, Vanessa C.; Jahn, Georg; Jäkel, Frank; Jekel, Marc; Johannesson, Magnus; Johnson, Larissa G.; Johnson, David J.; Johnson, Kate M.; Johnston, William J.; Jonas, Kai; Joy-Gaba, Jennifer A.; Kappes, Heather Barry; Kelso, Kim; Kidwell, Mallory C.; Kim, Seung Kyung; Kirkhart, Matthew; Kleinberg, Bennett; Knežević, Goran; Kolorz, Franziska Maria; Kossakowski, Jolanda J.; Krause, Robert Wilhelm; Krijnen, Job; Kuhlmann, Tim; Kunkels, Yoram K.; Kyc, Megan M.; Lai, Calvin K.; Laique, Aamir; Lakens, Daniël|info:eu-repo/dai/nl/298811855; Lane, Kristin A.; Lassetter, Bethany; Lazarević, Ljiljana B.; Le Bel, Etienne P.; Lee, Key Jung; Lee, Minha; Lemm, Kristi; Levitan, Carmel A.; Lewis, Melissa; Lin, Lin; Lin, Stephanie; Lippold, Matthias; Loureiro, Darren; Luteijn, Ilse; MacKinnon, Sean; Mainard, Heather N.; Marigold, Denise C.; Martin, Daniel P.; Martinez, Tylar; Masicampo, E. J.; Matacotta, Josh; Mathur, Maya; May, Michael; Mechin, Nicole; Mehta, Pranjal; Meixner, Johannes; Melinger, Alissa; Miller, Jeremy K.; Miller, Mallorie; Moore, Katherine; Möschl, Marcus; Motyl, Matt; Müller, Stephanie M.; Munafo, Marcus; Neijenhuijs, Koen I.; Nervi, Taylor; Nicolas, Gandalf; Nilsonne, Gustav; Nosek, Brian A.; Nuijten, Michèle B.; Olsson, Catherine; Osborne, Colleen; Ostkamp, Lutz; Pavel, Misha; Penton-Voak, Ian S.; Perna, Olivia; Pernet, Cyril; Perugini, Marco; Pipitone, R. Nathan; Pitts, Michael; Plessow, Franziska; Prenoveau, Jason M.; Rahal, Rima Maria; Ratliff, Kate A.; Reinhard, David; Renkewitz, Frank; Ricker, Ashley A.; Rigney, Anastasia; Rivers, Andrew M.; Roebke, Mark; Rutchick, Abraham M.; Ryan, Robert S.; Sahin, Onur; Saide, Anondah; Sandstrom, Gillian M.; Santos, David; Saxe, Rebecca; Schlegelmilch, René; Schmidt, Kathleen; Scholz, Sabine; Seibel, Larissa; Selterman, Dylan Faulkner; Shaki, Samuel; Simpson, William B.; Sinclair, H. Colleen; Skorinko, Jeanine L M; Slowik, Agnieszka; Snyder, Joel S.; Soderberg, Courtney; Sonnleitner, Carina; Spencer, Nick; Spies, Jeffrey R.; Steegen, Sara; Stieger, Stefan; Strohminger, Nina; Sullivan, Gavin B.; Talhelm, Thomas; Tapia, Megan; Te Dorsthorst, Anniek; Thomae, Manuela; Thomas, Sarah L.; Tio, Pia; Traets, Frits; Tsang, Steve; Tuerlinckx, Francis; Turchan, Paul; Valášek, Milan; Van't Veer, Anna E.; Van Aert, Robbie; Van Assen, Marcel|info:eu-repo/dai/nl/407629971; Van Bork, Riet; Van De Ven, Mathijs; Van Den Bergh, Don; Van Der Hulst, Marije; Van Dooren, Roel; Van Doorn, Johnny; Van Renswoude, Daan R.; Van Rijn, Hedderik; Vanpaemel, Wolf

    2015-01-01

    Reproducibility is a defining feature of science, but the extent to which it characterizes current research is unknown. We conducted replications of 100 experimental and correlational studies published in three psychology journals using high-powered designs and original materials when available.

  18. Estimating the reproducibility of psychological science

    NARCIS (Netherlands)

    Aarts, Alexander A.; Anderson, Joanna E.; Anderson, Christopher J.; Attridge, Peter R.; Attwood, Angela; Axt, Jordan; Babel, Molly; Bahnik, Stepan; Baranski, Erica; Barnett-Cowan, Michael; Bartmess, Elizabeth; Beer, Jennifer; Bell, Raoul; Bentley, Heather; Beyan, Leah; Binion, Grace; Borsboom, Denny; Bosch, Annick; Bosco, Frank A.; Bowman, Sara D.; Brandt, Mark J.; Braswell, Erin; Brohmer, Hilmar; Brown, Benjamin T.; Brown, Kristina; Bruening, Jovita; Calhoun-Sauls, Ann; Chagnon, Elizabeth; Callahan, Shannon P.; Chandler, Jesse; Chartier, Christopher R.; Cheung, Felix; Cillessen, Linda; Christopherson, Cody D.; Clay, Russ; Cleary, Hayley; Cloud, Mark D.; Cohn, Michael; Cohoon, Johanna; Columbus, Simon; Cordes, Andreas; Costantini, Giulio; Alvarez, Leslie D. Cramblet; Cremata, Ed; Crusius, Jan; DeCoster, Jamie; DeGaetano, Michelle A.; Della Penna, Nicolas; den Bezemer, Bobby; Deserno, Marie K.; Devitt, Olivia; Dewitte, Laura; Dobolyi, David G.; Dodson, Geneva T.; Donnellan, M. Brent; Donohue, Ryan; Dore, Rebecca A.; Dorrough, Angela; Dreber, Anna; Dugas, Michelle; Dunn, Elizabeth W.; Easey, Kayleigh; Eboigbe, Sylvia; Eggleston, Casey; Embley, Jo; Epskamp, Sacha; Errington, Timothy M.; Estel, Vivien; Farach, Frank J.; Feather, Jenelle; Fedor, Anna; Fernandez-Castilla, Belen; Fiedler, Susann; Field, James G.; Fitneva, Stanka A.; Flagan, Taru; Forest, Amanda L.; Forsell, Eskil; Foster, Joshua D.; Frank, Michael C.; Frazier, Rebecca S.; Fuchs, Heather; Gable, Philip; Galak, Jeff; Galliani, Elisa Maria; Gampa, Anup; Garcia, Sara; Gazarian, Douglas; Gilbert, Elizabeth; Giner-Sorolla, Roger; Gloeckner, Andreas; Goellner, Lars; Goh, Jin X.; Goldberg, Rebecca; Goodbourn, Patrick T.; Gordon-McKeon, Shauna; Gorges, Bryan; Gorges, Jessie; Goss, Justin; Graham, Jesse; Grange, James A.; Gray, Jeremy; Hartgerink, Chris; Hartshorne, Joshua; Hasselman, Fred; Hayes, Timothy; Heikensten, Emma; Henninger, Felix; Hodsoll, John; Holubar, Taylor; Hoogendoorn, Gea; Humphries, Denise J.; Hung, Cathy O. -Y.; Immelman, Nathali; Irsik, Vanessa C.; Jahn, Georg; Jaekel, Frank; Jekel, Marc; Johannesson, Magnus; Johnson, Larissa G.; Johnson, David J.; Johnson, Kate M.; Johnston, William J.; Jonas, Kai; Joy-Gaba, Jennifer A.; Kappes, Heather Barry; Kelso, Kim; Kidwell, Mallory C.; Kim, Seung Kyung; Kirkhart, Matthew; Kleinberg, Bennett; Knezevic, Goran; Kolorz, Franziska Maria; Kossakowski, Jolanda J.; Krause, Robert Wilhelm; Krijnen, Job; Kuhlmann, Tim; Kunkels, Yoram K.; Kyc, Megan M.; Lai, Calvin K.; Laique, Aamir; Lakens, Daniel; Lane, Kristin A.; Lassetter, Bethany; Lazarevic, Ljiljana B.; LeBel, Etienne P.; Lee, Key Jung; Lee, Minha; Lemm, Kristi; Levitan, Carmel A.; Lewis, M.; Lin, Lin; Lin, Stephanie; Lippold, Matthias; Loureiro, Darren; Luteijn, Ilse; Mackinnon, Sean; Mainard, Heather N.; Marigold, Denise C.; Martin, Daniel P.; Martinez, Tylar; Masicampo, E. J.; Matacotta, Josh; Mathur, Maya; May, Michael; Mechin, Nicole; Mehta, Pranjal; Meixner, Johannes; Melinger, Alissa; Miller, Jeremy K.; Miller, Mallorie; Moore, Katherine; Moeschl, Marcus; Motyl, Matt; Mueller, Stephanie M.; Munafo, Marcus; Neijenhuijs, Koen I.; Nervi, Taylor; Nicolas, Gandalf; Nilsonne, Gustav; Nosek, Brian A.; Nuijten, Michele B.; Olsson, Catherine; Osborne, Colleen; Ostkamp, Lutz; Pavel, Misha; Penton-Voak, Ian S.; Perna, Olivia; Pernet, Cyril; Perugini, Marco; Pipitone, R. Nathan; Pitts, Michael; Plessow, Franziska; Prenoveau, Jason M.; Rahal, Rima-Maria; Ratliff, Kate A.; Reinhard, David; Renkewitz, Frank; Ricker, Ashley A.; Rigney, Anastasia; Rivers, Andrew M.; Roebke, Mark; Rutchick, Abraham M.; Ryan, Robert S.; Sahin, Onur; Saide, Anondah; Sandstrom, Gillian M.; Santos, David; Saxe, Rebecca; Schmidt, Kathleen; Schlegelmilch, Rene; Seibel, Larissa; Scholz, Sabine; Selterman, Dylan Faulkner; Shaki, Samuel; Simpson, William B.; Sinclair, H. Colleen; Skorinko, Jeanine L. M.; Slowik, Agnieszka; Snyder, Joel S.; Soderberg, Courtney; Sonnleitner, Carina; Spencer, Nick; Spies, Jeffrey R.; Steegen, Sara; Stieger, Stefan; Strohminger, Nina; Sullivan, Gavin B.; Talhelm, Thomas; Tapia, Megan; te Dorsthorst, Anniek; Thomae, Manuela; Thomas, Sarah L.; Tio, Pia; Traets, Frits; Tsang, Steve; Tuerlinckx, Francis; Turchan, Paul; Valasek, Milan; van 't Veer, Anna E.; Van Aert, Robbie; van Assen, M.A.L.M.; van Bork, Riet; van de Ven, Mathijs; van den Bergh, Don; van der Hulst, Marije; van Dooren, Roel; van Doorn, Johnny; van Renswoude, Daan R.; van Rijn, Hedderik; Vanpaemel, Wolf; Echeverria, Alejandro Vasquez; Vazquez, Melissa; Velez, Natalia; Vermue, Marieke; Verschoor, Mark

    2015-01-01

    INTRODUCTION Reproducibility is a defining feature of science, but the extent to which it characterizes current research is unknown. Scientific claims should not gain credence because of the status or authority of their originator but by the replicability of their supporting evidence. Even research

  19. Estimating the reproducibility of psychological science

    NARCIS (Netherlands)

    Anderson, Joanna E.; Aarts, Alexander A.; Anderson, Christopher J.; Attridge, Peter R.; Attwood, Angela; Axt, Jordan; Babel, Molly; Bahník, Štěpán; Baranski, Erica; Barnett-Cowan, Michael; Bartmess, Elizabeth; Beer, Jennifer; Bell, Raoul; Bentley, Heather; Beyan, Leah; Binion, Grace; Borsboom, Denny; Bosch, Annick; Bosco, Frank A.; Bowman, Sara D.; Brandt, Mark J.; Braswell, Erin; Brohmer, Hilmar; Brown, Benjamin T.; Brown, Kristina; Brüning, Jovita; Calhoun-Sauls, Ann; Callahan, Shannon P.; Chagnon, Elizabeth; Chandler, Jesse; Chartier, Christopher R.; Cheung, Felix; Christopherson, Cody D.; Cillessen, Linda; Clay, Russ; Cleary, Hayley; Cloud, Mark D.; Conn, Michael; Cohoon, Johanna; Columbus, Simon; Cordes, Andreas; Costantini, Giulio; Alvarez, Leslie D Cramblet; Cremata, Ed; Crusius, Jan; DeCoster, Jamie; DeGaetano, Michelle A.; Penna, Nicolás Delia; Den Bezemer, Bobby; Deserno, Marie K.; Devitt, Olivia; Dewitte, Laura; Dobolyi, David G.; Dodson, Geneva T.; Donnellan, M. Brent; Donohue, Ryan; Dore, Rebecca A.; Dorrough, Angela; Dreber, Anna; Dugas, Michelle; Dunn, Elizabeth W.; Easey, Kayleigh; Eboigbe, Sylvia; Eggleston, Casey; Embley, Jo; Epskamp, Sacha; Errington, Timothy M.; Estel, Vivien; Farach, Frank J.; Feather, Jenelle; Fedor, Anna; Fernández-Castilla, Belén; Fiedler, Susann; Field, James G.; Fitneva, Stanka A.; Flagan, Taru; Forest, Amanda L.; Forsell, Eskil; Foster, Joshua D.; Frank, Michael C.; Frazier, Rebecca S.; Fuchs, Heather; Gable, Philip; Galak, Jeff; Galliani, Elisa Maria; Gampa, Anup; Garcia, Sara; Gazarian, Douglas; Gilbert, Elizabeth; Giner-Sorolla, Roger; Glöckner, Andreas; Goellner, Lars; Goh, Jin X.; Goldberg, Rebecca; Goodbourn, Patrick T.; Gordon-McKeon, Shauna; Gorges, Bryan; Gorges, Jessie; Goss, Justin; Graham, Jesse; Grange, James A.; Gray, Jeremy; Hartgerink, Chris; Hartshorne, Joshua; Hasselman, Fred; Hayes, Timothy; Heikensten, Emma; Henninger, Felix; Hodsoll, John; Holubar, Taylor; Hoogendoorn, Gea; Humphries, Denise J.; Hung, Cathy O Y; Immelman, Nathali; Irsik, Vanessa C.; Jahn, Georg; Jäkel, Frank; Jekel, Marc; Johannesson, Magnus; Johnson, Larissa G.; Johnson, David J.; Johnson, Kate M.; Johnston, William J.; Jonas, Kai; Joy-Gaba, Jennifer A.; Kappes, Heather Barry; Kelso, Kim; Kidwell, Mallory C.; Kim, Seung Kyung; Kirkhart, Matthew; Kleinberg, Bennett; Knežević, Goran; Kolorz, Franziska Maria; Kossakowski, Jolanda J.; Krause, Robert Wilhelm; Krijnen, Job; Kuhlmann, Tim; Kunkels, Yoram K.; Kyc, Megan M.; Lai, Calvin K.; Laique, Aamir; Lakens, Daniël; Lane, Kristin A.; Lassetter, Bethany; Lazarević, Ljiljana B.; Le Bel, Etienne P.; Lee, Key Jung; Lee, Minha; Lemm, Kristi; Levitan, Carmel A.; Lewis, Melissa; Lin, Lin; Lin, Stephanie; Lippold, Matthias; Loureiro, Darren; Luteijn, Ilse; MacKinnon, Sean; Mainard, Heather N.; Marigold, Denise C.; Martin, Daniel P.; Martinez, Tylar; Masicampo, E. J.; Matacotta, Josh; Mathur, Maya; May, Michael; Mechin, Nicole; Mehta, Pranjal; Meixner, Johannes; Melinger, Alissa; Miller, Jeremy K.; Miller, Mallorie; Moore, Katherine; Möschl, Marcus; Motyl, Matt; Müller, Stephanie M.; Munafo, Marcus; Neijenhuijs, Koen I.; Nervi, Taylor; Nicolas, Gandalf; Nilsonne, Gustav; Nosek, Brian A.; Nuijten, Michèle B.; Olsson, Catherine; Osborne, Colleen; Ostkamp, Lutz; Pavel, Misha; Penton-Voak, Ian S.; Perna, Olivia; Pernet, Cyril; Perugini, Marco; Pipitone, R. Nathan; Pitts, Michael; Plessow, Franziska; Prenoveau, Jason M.; Rahal, Rima Maria; Ratliff, Kate A.; Reinhard, David; Renkewitz, Frank; Ricker, Ashley A.; Rigney, Anastasia; Rivers, Andrew M.; Roebke, Mark; Rutchick, Abraham M.; Ryan, Robert S.; Sahin, Onur; Saide, Anondah; Sandstrom, Gillian M.; Santos, David; Saxe, Rebecca; Schlegelmilch, René; Schmidt, Kathleen; Scholz, Sabine; Seibel, Larissa; Selterman, Dylan Faulkner; Shaki, Samuel; Simpson, William B.; Sinclair, H. Colleen; Skorinko, Jeanine L M; Slowik, Agnieszka; Snyder, Joel S.; Soderberg, Courtney; Sonnleitner, Carina; Spencer, Nick; Spies, Jeffrey R.; Steegen, Sara; Stieger, Stefan; Strohminger, Nina; Sullivan, Gavin B.; Talhelm, Thomas; Tapia, Megan; Te Dorsthorst, Anniek; Thomae, Manuela; Thomas, Sarah L.; Tio, Pia; Traets, Frits; Tsang, Steve; Tuerlinckx, Francis; Turchan, Paul; Valášek, Milan; Van't Veer, Anna E.; Van Aert, Robbie; Van Assen, Marcel; Van Bork, Riet; Van De Ven, Mathijs; Van Den Bergh, Don; Van Der Hulst, Marije; Van Dooren, Roel; Van Doorn, Johnny; Van Renswoude, Daan R.; Van Rijn, Hedderik; Vanpaemel, Wolf; Echeverría, Alejandro Vásquez; Vazquez, Melissa; Velez, Natalia; Vermue, Marieke; Verschoor, Mark; Vianello, Michelangelo; Voracek, Martin; Vuu, Gina; Wagenmakers, Eric Jan; Weerdmeester, Joanneke; Welsh, Ashlee; Westgate, Erin C.; Wissink, Joeri; Wood, Michael; Woods, Andy; Wright, Emily; Wu, Sining; Zeelenberg, Marcel; Zuni, Kellylynn

    2015-01-01

    Reproducibility is a defining feature of science, but the extent to which it characterizes current research is unknown. We conducted replications of 100 experimental and correlational studies published in three psychology journals using high-powered designs and original materials when available. Rep

  20. Estimating the reproducibility of psychological science

    NARCIS (Netherlands)

    Aarts, Alexander A.; Anderson, Joanna E.; Anderson, Christopher J.; Attridge, Peter R.; Attwood, Angela; Axt, Jordan; Babel, Molly; Bahnik, Stepan; Baranski, Erica; Barnett-Cowan, Michael; Bartmess, Elizabeth; Beer, Jennifer; Bell, Raoul; Bentley, Heather; Beyan, Leah; Binion, Grace; Borsboom, Denny; Bosch, Annick; Bosco, Frank A.; Bowman, Sara D.; Brandt, Mark J.; Braswell, Erin; Brohmer, Hilmar; Brown, Benjamin T.; Brown, Kristina; Bruening, Jovita; Calhoun-Sauls, Ann; Chagnon, Elizabeth; Callahan, Shannon P.; Chandler, Jesse; Chartier, Christopher R.; Cheung, Felix; Cillessen, Linda; Christopherson, Cody D.; Clay, Russ; Cleary, Hayley; Cloud, Mark D.; Cohn, Michael; Cohoon, Johanna; Columbus, Simon; Cordes, Andreas; Costantini, Giulio; Alvarez, Leslie D. Cramblet; Cremata, Ed; Crusius, Jan; DeCoster, Jamie; DeGaetano, Michelle A.; Della Penna, Nicolas; den Bezemer, Bobby; Deserno, Marie K.; Devitt, Olivia; Dewitte, Laura; Dobolyi, David G.; Dodson, Geneva T.; Donnellan, M. Brent; Donohue, Ryan; Dore, Rebecca A.; Dorrough, Angela; Dreber, Anna; Dugas, Michelle; Dunn, Elizabeth W.; Easey, Kayleigh; Eboigbe, Sylvia; Eggleston, Casey; Embley, Jo; Epskamp, Sacha; Errington, Timothy M.; Estel, Vivien; Farach, Frank J.; Feather, Jenelle; Fedor, Anna; Fernandez-Castilla, Belen; Fiedler, Susann; Field, James G.; Fitneva, Stanka A.; Flagan, Taru; Forest, Amanda L.; Forsell, Eskil; Foster, Joshua D.; Frank, Michael C.; Frazier, Rebecca S.; Fuchs, Heather; Gable, Philip; Galak, Jeff; Galliani, Elisa Maria; Gampa, Anup; Garcia, Sara; Gazarian, Douglas; Gilbert, Elizabeth; Giner-Sorolla, Roger; Gloeckner, Andreas; Goellner, Lars; Goh, Jin X.; Goldberg, Rebecca; Goodbourn, Patrick T.; Gordon-McKeon, Shauna; Gorges, Bryan; Gorges, Jessie; Goss, Justin; Graham, Jesse; Grange, James A.; Gray, Jeremy; Hartgerink, Chris; Hartshorne, Joshua; Hasselman, Fred; Hayes, Timothy; Heikensten, Emma; Henninger, Felix; Hodsoll, John; Holubar, Taylor; Hoogendoorn, Gea; Humphries, Denise J.; Hung, Cathy O. -Y.; Immelman, Nathali; Irsik, Vanessa C.; Jahn, Georg; Jaekel, Frank; Jekel, Marc; Johannesson, Magnus; Johnson, Larissa G.; Johnson, David J.; Johnson, Kate M.; Johnston, William J.; Jonas, Kai; Joy-Gaba, Jennifer A.; Kappes, Heather Barry; Kelso, Kim; Kidwell, Mallory C.; Kim, Seung Kyung; Kirkhart, Matthew; Kleinberg, Bennett; Knezevic, Goran; Kolorz, Franziska Maria; Kossakowski, Jolanda J.; Krause, Robert Wilhelm; Krijnen, Job; Kuhlmann, Tim; Kunkels, Yoram K.; Kyc, Megan M.; Lai, Calvin K.; Laique, Aamir; Lakens, Daniel; Lane, Kristin A.; Lassetter, Bethany; Lazarevic, Ljiljana B.; LeBel, Etienne P.; Lee, Key Jung; Lee, Minha; Lemm, Kristi; Levitan, Carmel A.; Lewis, M.; Lin, Lin; Lin, Stephanie; Lippold, Matthias; Loureiro, Darren; Luteijn, Ilse; Mackinnon, Sean; Mainard, Heather N.; Marigold, Denise C.; Martin, Daniel P.; Martinez, Tylar; Masicampo, E. J.; Matacotta, Josh; Mathur, Maya; May, Michael; Mechin, Nicole; Mehta, Pranjal; Meixner, Johannes; Melinger, Alissa; Miller, Jeremy K.; Miller, Mallorie; Moore, Katherine; Moeschl, Marcus; Motyl, Matt; Mueller, Stephanie M.; Munafo, Marcus; Neijenhuijs, Koen I.; Nervi, Taylor; Nicolas, Gandalf; Nilsonne, Gustav; Nosek, Brian A.; Nuijten, Michele B.; Olsson, Catherine; Osborne, Colleen; Ostkamp, Lutz; Pavel, Misha; Penton-Voak, Ian S.; Perna, Olivia; Pernet, Cyril; Perugini, Marco; Pipitone, R. Nathan; Pitts, Michael; Plessow, Franziska; Prenoveau, Jason M.; Rahal, Rima-Maria; Ratliff, Kate A.; Reinhard, David; Renkewitz, Frank; Ricker, Ashley A.; Rigney, Anastasia; Rivers, Andrew M.; Roebke, Mark; Rutchick, Abraham M.; Ryan, Robert S.; Sahin, Onur; Saide, Anondah; Sandstrom, Gillian M.; Santos, David; Saxe, Rebecca; Schmidt, Kathleen; Schlegelmilch, Rene; Seibel, Larissa; Scholz, Sabine; Selterman, Dylan Faulkner; Shaki, Samuel; Simpson, William B.; Sinclair, H. Colleen; Skorinko, Jeanine L. M.; Slowik, Agnieszka; Snyder, Joel S.; Soderberg, Courtney; Sonnleitner, Carina; Spencer, Nick; Spies, Jeffrey R.; Steegen, Sara; Stieger, Stefan; Strohminger, Nina; Sullivan, Gavin B.; Talhelm, Thomas; Tapia, Megan; te Dorsthorst, Anniek; Thomae, Manuela; Thomas, Sarah L.; Tio, Pia; Traets, Frits; Tsang, Steve; Tuerlinckx, Francis; Turchan, Paul; Valasek, Milan; van 't Veer, Anna E.; Van Aert, Robbie; van Assen, M.A.L.M.; van Bork, Riet; van de Ven, Mathijs; van den Bergh, Don; van der Hulst, Marije; van Dooren, Roel; van Doorn, Johnny; van Renswoude, Daan R.; van Rijn, Hedderik; Vanpaemel, Wolf; Echeverria, Alejandro Vasquez; Vazquez, Melissa; Velez, Natalia; Vermue, Marieke; Verschoor, Mark; Vianello, Michelangelo; Voracek, Martin; Vuu, Gina; Wagenmakers, Eric-Jan; Weerdmeester, Joanneke; Welsh, Ashlee; Westgate, Erin C.; Wissink, Joeri; Wood, Michael; Woods, Andy; Wright, Emily; Wu, Sining; Zeelenberg, Marcel; Zuni, Kellylynn

    2015-01-01

    INTRODUCTION Reproducibility is a defining feature of science, but the extent to which it characterizes current research is unknown. Scientific claims should not gain credence because of the status or authority of their originator but by the replicability of their supporting evidence. Even research

  1. Spatial mapping and statistical reproducibility of an array of 256 one-dimensional quantum wires

    Energy Technology Data Exchange (ETDEWEB)

    Al-Taie, H., E-mail: ha322@cam.ac.uk; Kelly, M. J. [Centre for Advanced Photonics and Electronics, Electrical Engineering Division, Department of Engineering, 9 J. J. Thomson Avenue, University of Cambridge, Cambridge CB3 0FA (United Kingdom); Cavendish Laboratory, Department of Physics, University of Cambridge, J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Smith, L. W.; Lesage, A. A. J.; Griffiths, J. P.; Beere, H. E.; Jones, G. A. C.; Ritchie, D. A.; Smith, C. G. [Cavendish Laboratory, Department of Physics, University of Cambridge, J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); See, P. [National Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW (United Kingdom)

    2015-08-21

    We utilize a multiplexing architecture to measure the conductance properties of an array of 256 split gates. We investigate the reproducibility of the pinch off and one-dimensional definition voltage as a function of spatial location on two different cooldowns, and after illuminating the device. The reproducibility of both these properties on the two cooldowns is high, the result of the density of the two-dimensional electron gas returning to a similar state after thermal cycling. The spatial variation of the pinch-off voltage reduces after illumination; however, the variation of the one-dimensional definition voltage increases due to an anomalous feature in the center of the array. A technique which quantifies the homogeneity of split-gate properties across the array is developed which captures the experimentally observed trends. In addition, the one-dimensional definition voltage is used to probe the density of the wafer at each split gate in the array on a micron scale using a capacitive model.

  2. Spatial mapping and statistical reproducibility of an array of 256 one-dimensional quantum wires

    Science.gov (United States)

    Al-Taie, H.; Smith, L. W.; Lesage, A. A. J.; See, P.; Griffiths, J. P.; Beere, H. E.; Jones, G. A. C.; Ritchie, D. A.; Kelly, M. J.; Smith, C. G.

    2015-08-01

    We utilize a multiplexing architecture to measure the conductance properties of an array of 256 split gates. We investigate the reproducibility of the pinch off and one-dimensional definition voltage as a function of spatial location on two different cooldowns, and after illuminating the device. The reproducibility of both these properties on the two cooldowns is high, the result of the density of the two-dimensional electron gas returning to a similar state after thermal cycling. The spatial variation of the pinch-off voltage reduces after illumination; however, the variation of the one-dimensional definition voltage increases due to an anomalous feature in the center of the array. A technique which quantifies the homogeneity of split-gate properties across the array is developed which captures the experimentally observed trends. In addition, the one-dimensional definition voltage is used to probe the density of the wafer at each split gate in the array on a micron scale using a capacitive model.

  3. Tactile display with dielectric multilayer elastomer actuatorsq

    Science.gov (United States)

    Matysek, Marc; Lotz, Peter; Schlaak, Helmut F.

    2009-03-01

    Tactile perception is the human sensation of surface textures through the vibrations generated by stroking a finger over the surface. The skin responds to several distributed physical quantities. Perhaps the most important are high-frequency vibrations, pressure distributions (static shape) and thermal properties. The integration of tactile displays in man-machine interfaces promises a more intuitive handling. For this reason many tactile displays are developed using different technologies. We present several state-of-the-art tactile displays based on different types of dielectric elastomer actuators to clarify the advantages of our matrix display based on multilayer technology. Using this technology perpendicular and hexagonal arrays of actuator elements (tactile stimulators) can be integrated into a PDMS substrate. Element diameters down to 1 mm allow stimuli at the range of the human two-point-discrimination threshold. Driving the elements by column and row addressing enables various stimulation patterns with a reduced number of feeding lines. The transient analysis determines charging times of the capacitive actuators depending on actuator geometry and material parameters. This is very important to ensure an adequate dynamic characteristic of the actuators to stimulate the human skin by vibrations. The suitability of multilayer dielectric elastomer actuators for actuation in tactile displays has been determined. Beside the realization of a static tactile display - where multilayer DEA are integrated as drives for movable contact pins - we focus on the direct use of DEA as a vibrotactile display. Finally, we present the scenario and achieved results of a recognition threshold test. Even relative low voltages in the range of 800 V generate vibrations with 100% recognition ratio within the group of participants. Furthermore, the frequency dependent characteristic of the determined recognition threshold confirms with established literature.

  4. Mitigation of Voltage Sags in CIGRE Low Voltage Distribution Network

    DEFF Research Database (Denmark)

    Mustafa, Ghullam; Bak-Jensen, Birgitte; Mahat, Pukar;

    2013-01-01

    problems in the distribution system. The voltage problems dealt with in this paper are to show how to mitigate voltage sags in the CIGRE Low Voltage (LV) test network and networks like this. The voltage sags, for the tested cases in the CIGRE LV test network are mainly due to three phase faults....... The compensation of voltage sags in the different parts of CIGRE distribution network is done by using the four STATCOM compensators already existing in the test grid. The simulations are carried out in DIgSILENT power factory software version 15.0....

  5. A PHYSICAL ACTIVITY QUESTIONNAIRE: REPRODUCIBILITY AND VALIDITY

    Directory of Open Access Journals (Sweden)

    Nicolas Barbosa

    2007-12-01

    Full Text Available This study evaluates the Quantification de L'Activite Physique en Altitude chez les Enfants (QAPACE supervised self-administered questionnaire reproducibility and validity on the estimation of the mean daily energy expenditure (DEE on Bogotá's schoolchildren. The comprehension was assessed on 324 students, whereas the reproducibility was studied on a different random sample of 162 who were exposed twice to it. Reproducibility was assessed using both the Bland-Altman plot and the intra-class correlation coefficient (ICC. The validity was studied in a sample of 18 girls and 18 boys randomly selected, which completed the test - re-test study. The DEE derived from the questionnaire was compared with the laboratory measurement results of the peak oxygen uptake (Peak VO2 from ergo-spirometry and Leger Test. The reproducibility ICC was 0.96 (95% C.I. 0.95-0.97; by age categories 8-10, 0.94 (0.89-0. 97; 11-13, 0.98 (0.96- 0.99; 14-16, 0.95 (0.91-0.98. The ICC between mean TEE as estimated by the questionnaire and the direct and indirect Peak VO2 was 0.76 (0.66 (p<0.01; by age categories, 8-10, 11-13, and 14-16 were 0.89 (0.87, 0.76 (0.78 and 0.88 (0.80 respectively. The QAPACE questionnaire is reproducible and valid for estimating PA and showed a high correlation with the Peak VO2 uptake

  6. ITK: Enabling Reproducible Research and Open Science

    Directory of Open Access Journals (Sweden)

    Matthew Michael McCormick

    2014-02-01

    Full Text Available Reproducibility verification is essential to the practice of the scientific method. Researchers report their findings, which are strengthened as other independent groups in the scientific community share similar outcomes. In the many scientific fields where software has become a fundamental tool for capturing and analyzing data, this requirement of reproducibility implies that reliable and comprehensive software platforms and tools should be made available to the scientific community. The tools will empower them and the public to verify, through practice, the reproducibility of observations that are reported in the scientific literature.Medical image analysis is one of the fields in which the use of computational resources, both software and hardware, are an essential platform for performing experimental work. In this arena, the introduction of the Insight Toolkit (ITK in 1999 has transformed the field and facilitates its progress by accelerating the rate at which algorithmic implementations are developed, tested, disseminated and improved. By building on the efficiency and quality of open source methodologies, ITK has provided the medical image community with an effective platform on which to build a daily workflow that incorporates the true scientific practices of reproducibility verification.This article describes the multiple tools, methodologies, and practices that the ITK community has adopted, refined, and followed during the past decade, in order to become one of the research communities with the most modern reproducibility verification infrastructure. For example, 207 contributors have created over 2400 unit tests that provide over 84% code line test coverage. The Insight Journal, an open publication journal associated with the toolkit, has seen over 360,000 publication downloads. The median normalized closeness centrality, a measure of knowledge flow, resulting from the distributed peer code review system was high, 0.46.

  7. Voltage Controlled Dynamic Demand Response

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Mahat, Pukar

    2013-01-01

    . An adaptive dynamic model has been developed to determine composite voltage dependency of an aggregated load on feeder level. Following the demand dispatch or control signal, optimum voltage setting at the LV substation is determined based on the voltage dependency of the load. Furthermore, a new technique...

  8. Charge-pump voltage converter

    Science.gov (United States)

    Brainard, John P.; Christenson, Todd R.

    2009-11-03

    A charge-pump voltage converter for converting a low voltage provided by a low-voltage source to a higher voltage. Charge is inductively generated on a transfer rotor electrode during its transit past an inductor stator electrode and subsequently transferred by the rotating rotor to a collector stator electrode for storage or use. Repetition of the charge transfer process leads to a build-up of voltage on a charge-receiving device. Connection of multiple charge-pump voltage converters in series can generate higher voltages, and connection of multiple charge-pump voltage converters in parallel can generate higher currents. Microelectromechanical (MEMS) embodiments of this invention provide a small and compact high-voltage (several hundred V) voltage source starting with a few-V initial voltage source. The microscale size of many embodiments of this invention make it ideally suited for MEMS- and other micro-applications where integration of the voltage or charge source in a small package is highly desirable.

  9. Reproducibility of the Optical Biometer OA-1000 (Tomey

    Directory of Open Access Journals (Sweden)

    Susanne Christiane Goebels

    2014-01-01

    Full Text Available Aim. The OA-1000 (Tomey, Japan is a new optical biometer, which measures axial length (AL, anterior chamber depth (ACD, and central corneal thickness (CT utilizing optical interference technology. The aim of this study was to prove the reproducibility which is considered fundamental for other clinical investigations. Methods. 55 healthy volunteers were enrolled in this study. For each measurement of AL, ACD, and CT the biometer is grabbing a sequence of 10 shots and mean value (mean and standard deviation (SD are displayed. Five consecutive measurements were performed and average and standard deviation were assessed. Cronbach’s α was derived as a quality measure for reproducibility. Results. For AL measurement Cronbach’s α was 1.000, for CT 0.999, and for ACD 0.979, respectively. Mean value for AL was 23.36±1.03 mm, for ACD it was 3.60±0.687 mm, and for CT it was 552.08±29.70 μm, respectively. Standard deviation for AL was 0.013±0.022 mm, for ACD 0.09±0.11 mm, and for CT 2.18±1.75 μm. One correlation was found between mean values for AL and ACD (R = 0.388, P = 0.005; no other correlations were found between mean values or values of standard deviation of AL, ACD, or CT. Conclusion. The OA-1000 shows an excellent reproducibility for measurement of AL, ACD, and CT and can be used in clinical practice.

  10. Transient voltage sharing in series-coupled high voltage switches

    Directory of Open Access Journals (Sweden)

    Editorial Office

    1992-07-01

    Full Text Available For switching voltages in excess of the maximum blocking voltage of a switching element (for example, thyristor, MOSFET or bipolar transistor such elements are often coupled in series - and additional circuitry has to be provided to ensure equal voltage sharing. Between each such series element and system ground there is a certain parasitic capacitance that may draw a significant current during high-speed voltage transients. The "open" switch is modelled as a ladder network. Analy­sis reveals an exponential progression in the distribution of the applied voltage across the elements. Overstressing thus oc­curs in some of the elements at levels of the total voltage that are significantly below the design value. This difficulty is overcome by grading the voltage sharing circuitry, coupled in parallel with each element, in a prescribed manner, as set out here.

  11. Refreshing Refreshable Braille Displays.

    Science.gov (United States)

    Russomanno, Alexander; O'Modhrain, Sile; Gillespie, R Brent; Rodger, Matthew W M

    2015-01-01

    The increased access to books afforded to blind people via e-publishing has given them long-sought independence for both recreational and educational reading. In most cases, blind readers access materials using speech output. For some content such as highly technical texts, music, and graphics, speech is not an appropriate access modality as it does not promote deep understanding. Therefore blind braille readers often prefer electronic braille displays. But, these are prohibitively expensive. The search is on, therefore, for a low-cost refreshable display that would go beyond current technologies and deliver graphical content as well as text. And many solutions have been proposed, some of which reduce costs by restricting the number of characters that can be displayed, even down to a single braille cell. In this paper, we demonstrate that restricting tactile cues during braille reading leads to poorer performance in a letter recognition task. In particular, we show that lack of sliding contact between the fingertip and the braille reading surface results in more errors and that the number of errors increases as a function of presentation speed. These findings suggest that single cell displays which do not incorporate sliding contact are likely to be less effective for braille reading.

  12. Virtual Auditory Displays

    Science.gov (United States)

    2000-01-01

    timbre , intensity, distance, room modeling, radio communication Virtual Environments Handbook Chapter 4 Virtual Auditory Displays Russell D... musical note “A” as a pure sinusoid, there will be 440 condensations and rarefactions per second. The distance between two adjacent condensations or...and complexity are pitch, loudness, and timbre respectively. This distinction between physical and perceptual measures of sound properties is an

  13. Virtual acoustic displays

    Science.gov (United States)

    Wenzel, Elizabeth M.

    1991-01-01

    A 3D auditory display can potentially enhance information transfer by combining directional and iconic information in a quite naturalistic representation of dynamic objects in the interface. Another aspect of auditory spatial clues is that, in conjunction with other modalities, it can act as a potentiator of information in the display. For example, visual and auditory cues together can reinforce the information content of the display and provide a greater sense of presence or realism in a manner not readily achievable by either modality alone. This phenomenon will be particularly useful in telepresence applications, such as advanced teleconferencing environments, shared electronic workspaces, and monitoring telerobotic activities in remote or hazardous situations. Thus, the combination of direct spatial cues with good principles of iconic design could provide an extremely powerful and information-rich display which is also quite easy to use. An alternative approach, recently developed at ARC, generates externalized, 3D sound cues over headphones in realtime using digital signal processing. Here, the synthesis technique involves the digital generation of stimuli using Head-Related Transfer Functions (HRTF's) measured in the two ear-canals of individual subjects. Other similar approaches include an analog system developed by Loomis, et. al., (1990) and digital systems which make use of transforms derived from normative mannikins and simulations of room acoustics. Such an interface also requires the careful psychophysical evaluation of listener's ability to accurately localize the virtual or synthetic sound sources. From an applied standpoint, measurement of each potential listener's HRTF's may not be possible in practice. For experienced listeners, localization performance was only slightly degraded compared to a subject's inherent ability. Alternatively, even inexperienced listeners may be able to adapt to a particular set of HRTF's as long as they provide adequate

  14. No-Voltage Meter

    Science.gov (United States)

    1976-02-01

    VW- IKft, 1/4 H4 -Wv- IK!1, I/4W INTERNAL VOLTAGE NOTE ALL TRANSISTORS ARE 2N43A OR EQUIVALENT GERMANIUM ALLOY PNP AA ALKALINE BATTERY...D-,, regardless of polarity. This signal is then full-wave rectified by the diode-connected Germanium transistor bridge, T,, T-,, T3, and T4... Transistor T5 acts as a second current limiter. Resistor R2 was selected to give 90 f# of full-scale meter deflection with an input signal of 115 volts

  15. Benchmarking of Voltage Sag Generators

    DEFF Research Database (Denmark)

    Yang, Yongheng; Blaabjerg, Frede; Zou, Zhixiang

    2012-01-01

    The increased penetration of renewable energy systems, like photovoltaic and wind power systems, rises the concern about the power quality and stability of the utility grid. Some regulations for Low Voltage Ride-Through (LVRT) for medium voltage or high voltage applications, are coming into force...... to guide these grid-connected distributed power generation systems. In order to verify the response of such systems for voltage disturbance, mainly for evaluation of voltage sags/dips, a Voltage Sag Generator (VSG) is needed. This paper evaluates such sag test devices according to IEC 61000 in order...... to provide cheaper solutions to test against voltage sags. Simulation and experimental results demonstrate that the shunt impedance based VSG solution is the easiest and cheapest one for laboratory test applications. The back-to-back fully controlled converter based VSG is the most flexible solution...

  16. Additive Manufacturing: Reproducibility of Metallic Parts

    Directory of Open Access Journals (Sweden)

    Konda Gokuldoss Prashanth

    2017-02-01

    Full Text Available The present study deals with the properties of five different metals/alloys (Al-12Si, Cu-10Sn and 316L—face centered cubic structure, CoCrMo and commercially pure Ti (CP-Ti—hexagonal closed packed structure fabricated by selective laser melting. The room temperature tensile properties of Al-12Si samples show good consistency in results within the experimental errors. Similar reproducible results were observed for sliding wear and corrosion experiments. The other metal/alloy systems also show repeatable tensile properties, with the tensile curves overlapping until the yield point. The curves may then follow the same path or show a marginal deviation (~10 MPa until they reach the ultimate tensile strength and a negligible difference in ductility levels (of ~0.3% is observed between the samples. The results show that selective laser melting is a reliable fabrication method to produce metallic materials with consistent and reproducible properties.

  17. Reproducibility of scoring emphysema by HRCT

    Energy Technology Data Exchange (ETDEWEB)

    Malinen, A.; Partanen, K.; Rytkoenen, H.; Vanninen, R. [Kuopio Univ. Hospital (Finland). Dept. of Clinical Radiology; Erkinjuntti-Pekkanen, R. [Kuopio Univ. Hospital (Finland). Dept. of Pulmonary Diseases

    2002-04-01

    Purpose: We evaluated the reproducibility of three visual scoring methods of emphysema and compared these methods with pulmonary function tests (VC, DLCO, FEV1 and FEV%) among farmer's lung patients and farmers. Material and Methods: Three radiologists examined high-resolution CT images of farmer's lung patients and their matched controls (n=70) for chronic interstitial lung diseases. Intraobserver reproducibility and interobserver variability were assessed for three methods: severity, Sanders' (extent) and Sakai. Pulmonary function tests as spirometry and diffusing capacity were measured. Results: Intraobserver -values for all three methods were good (0.51-0.74). Interobserver varied from 0.35 to 0.72. The Sanders' and the severity methods correlated strongly with pulmonary function tests, especially DLCO and FEV1. Conclusion: The Sanders' method proved to be reliable in evaluating emphysema, in terms of good consistency of interpretation and good correlation with pulmonary function tests.

  18. Reproducibility of electroretinograms recorded with DTL electrodes.

    Science.gov (United States)

    Hébert, M; Lachapelle, P; Dumont, M

    The purpose of this study was to examine whether the use of the DTL fiber electrode yields stable and reproducible electroretinographic recordings. To do so, luminance response function, derived from dark-adapted electroretinograms, was obtained from both eyes of 10 normal subjects at two recording sessions spaced by 7-14 days. The data thus generated was used to calculate Naka-Rushton Vmax and k parameters and values obtained at the two recording sessions were compared. Our results showed that there was no significant difference in the values of Vmax and k calculated from the data generated at the two recording sessions. The above clearly demonstrate that the use of the DTL fiber electrode does not jeopardize, in any way, the stability and reproducibility of ERG responses.

  19. Repeatability and Reproducibility of Virtual Subjective Refraction.

    Science.gov (United States)

    Perches, Sara; Collados, M Victoria; Ares, Jorge

    2016-10-01

    To establish the repeatability and reproducibility of a virtual refraction process using simulated retinal images. With simulation software, aberrated images corresponding with each step of the refraction process were calculated following the typical protocol of conventional subjective refraction. Fifty external examiners judged simulated retinal images until the best sphero-cylindrical refraction and the best visual acuity were achieved starting from the aberrometry data of three patients. Data analyses were performed to assess repeatability and reproducibility of the virtual refraction as a function of pupil size and aberrometric profile of different patients. SD values achieved in three components of refraction (M, J0, and J45) are lower than 0.25D in repeatability analysis. Regarding reproducibility, we found SD values lower than 0.25D in the most cases. When the results of virtual refraction with different pupil diameters (4 and 6 mm) were compared, the mean of differences (MoD) obtained were not clinically significant (less than 0.25D). Only one of the aberrometry profiles with high uncorrected astigmatism shows poor results for the M component in reproducibility and pupil size dependence analysis. In all cases, vision achieved was better than 0 logMAR. A comparison between the compensation obtained with virtual and conventional subjective refraction was made as an example of this application, showing good quality retinal images in both processes. The present study shows that virtual refraction has similar levels of precision as conventional subjective refraction. Moreover, virtual refraction has also shown that when high low order astigmatism is present, the refraction result is less precise and highly dependent on pupil size.

  20. Data Identifiers and Citations Enable Reproducible Science

    Science.gov (United States)

    Tilmes, C.

    2011-12-01

    Modern science often involves data processing with tremendous volumes of data. Keeping track of that data has been a growing challenge for data center. Researchers who access and use that data don't always reference and cite their data sources adequately for consumers of their research to follow their methodology or reproduce their analyses or experiments. Recent research has led to recommendations for good identifiers and citations that can help address this problem. This paper will describe some of the best practices in data identifiers, reference and citation. Using a simplified example scenario based on a long term remote sensing satellite mission, it will explore issues in identifying dynamic data sets and the importance of good data citations for reproducibility. It will describe the difference between granule and collection level identifiers, using UUIDs and DOIs to illustrate some recommendations for developing identifiers and assigning them during data processing. As data processors create data products, the provenance of the input products and precise steps that led to their creation are recorded and published for users of the data to see. As researchers access the data from an archive, they can use the provenance to help understand the genesis of the data, which could have effects on their usage of the data. By citing the data on publishing their research, others can retrieve the precise data used in their research and reproduce the analyses and experiments to confirm the results. Describing the experiment to a sufficient extent to reproduce the research enforces a formal approach that lends credibility to the results, and ultimately, to the policies of decision makers depending on that research.

  1. Tactile display device using an electrorheological fluid

    Science.gov (United States)

    Garner, H. Douglas

    1994-08-01

    A tactile display device utilizes an electrorheological fluid to activate a plurality of tactile dots. A voltage is selectively produced uniformly across an electrorheological fluid flowing between a common ground electrode and a plurality of conductive dot electrodes, thereby producing an increase in the fluid's viscosity to the extent that fluid flow between the two electrodes is restricted. The flow restriction produces a build-up of electrorheological fluid in a corresponding dot actuator chamber. The resulting pressure increase in the chamber displaces an elastic diaphragm fixed to a display surface to form a lump which can be perceived by the reader as one dot in a Braille character cell. A flow regulation system provides a continually pressurized flow system and provides for free flow of the electrorheological fluid through the plurality of dot actuator chambers when they are not activated. The device is adaptable to printed circuit techniques and can simultaneously display tactile dots representative of a full page of Braille characters stored on a medium such as a tape cassette or to display tactile dots representative of non-Braille data appearing on a computer monitor or contained on another data storage medium. In an alternate embodiment, the elastic diaphragm drives a plurality of spring-loaded pins provided with positive stops to maintain consistent displacements of the pins in both their actuated and nonactuated positions.

  2. Tissue Doppler imaging reproducibility during exercise.

    Science.gov (United States)

    Bougault, V; Nottin, S; Noltin, S; Doucende, G; Obert, P

    2008-05-01

    Tissue Doppler imaging (TDI) is an echocardiographic technique used during exercising to improve the accuracy of a cardiovascular diagnostic. The validity of TDI requires its reproducibility, which has never been challenged during moderate to maximal intensity exercising. The present study was specifically designed to assess the transmitral Doppler and pulsed TDI reproducibility in 19 healthy men, who had undergone two identical semi-supine maximal exercise tests on a cycle ergometer. Systolic (S') and diastolic (E') tissue velocities at the septal and lateral walls as well as early transmitral velocities (E) were assessed during exercise up to maximal effort. The data were compared between the two tests at 40 %, 60 %, 80 % and 100 % of maximal aerobic power. Despite upper body movements and hyperventilation, good quality echocardiographic images were obtained in each case. Regardless of exercise intensity, no differences were noticed between the two tests for all measurements. The variation coefficients for Doppler variables ranged from 3 % to 9 % over the transition from rest to maximal exercise. The random measurement error was, on average, 5.8 cm/s for E' and 4.4 cm/s for S'. Overall, the reproducibility of TDI was acceptable. Tissue Doppler imaging can be used to accurately evaluate LV diastolic and/or systolic function for this range of exercise intensity.

  3. How to Write a Reproducible Paper

    Science.gov (United States)

    Irving, D. B.

    2016-12-01

    The geosciences have undergone a computational revolution in recent decades, to the point where almost all modern research relies heavily on software and code. Despite this profound change in the research methods employed by geoscientists, the reporting of computational results has changed very little in academic journals. This lag has led to something of a reproducibility crisis, whereby it is impossible to replicate and verify most of today's published computational results. While it is tempting to decry the slow response of journals and funding agencies in the face of this crisis, there are very few examples of reproducible research upon which to base new communication standards. In an attempt to address this deficiency, this presentation will describe a procedure for reporting computational results that was employed in a recent Journal of Climate paper. The procedure was developed to be consistent with recommended computational best practices and seeks to minimize the time burden on authors, which has been identified as the most important barrier to publishing code. It should provide a starting point for geoscientists looking to publish reproducible research, and could be adopted by journals as a formal minimum communication standard.

  4. Tools and techniques for computational reproducibility.

    Science.gov (United States)

    Piccolo, Stephen R; Frampton, Michael B

    2016-07-11

    When reporting research findings, scientists document the steps they followed so that others can verify and build upon the research. When those steps have been described in sufficient detail that others can retrace the steps and obtain similar results, the research is said to be reproducible. Computers play a vital role in many research disciplines and present both opportunities and challenges for reproducibility. Computers can be programmed to execute analysis tasks, and those programs can be repeated and shared with others. The deterministic nature of most computer programs means that the same analysis tasks, applied to the same data, will often produce the same outputs. However, in practice, computational findings often cannot be reproduced because of complexities in how software is packaged, installed, and executed-and because of limitations associated with how scientists document analysis steps. Many tools and techniques are available to help overcome these challenges; here we describe seven such strategies. With a broad scientific audience in mind, we describe the strengths and limitations of each approach, as well as the circumstances under which each might be applied. No single strategy is sufficient for every scenario; thus we emphasize that it is often useful to combine approaches.

  5. Coordinated Voltage Control of Distributed PV Inverters for Voltage Regulation in Low Voltage Distribution Networks

    DEFF Research Database (Denmark)

    Nainar, Karthikeyan; Pokhrel, Basanta Raj; Pillai, Jayakrishnan Radhakrishna

    2017-01-01

    This paper reviews and analyzes the existing voltage control methods of distributed solar PV inverters to improve the voltage regulation and thereby the hosting capacity of a low-voltage distribution network. A novel coordinated voltage control method is proposed based on voltage sensitivity...... analysis, which is simple for computation and requires moderate automation and communication infrastructure. The proposed method is suitable for a hierarchical control structure where a supervisory controller has the provision to adapt the settings of local PV inverter controllers for overall system...

  6. Heat-pump performance: voltage dip/sag, under-voltage and over-voltage

    Directory of Open Access Journals (Sweden)

    William J.B. Heffernan

    2014-12-01

    Full Text Available Reverse cycle air-source heat-pumps are an increasingly significant load in New Zealand and in many other countries. This has raised concern over the impact wide-spread use of heat-pumps may have on the grid. The characteristics of the loads connected to the power system are changing because of heat-pumps. Their performance during under-voltage events such as voltage dips has the potential to compound the event and possibly cause voltage collapse. In this study, results from testing six heat-pumps are presented to assess their performance at various voltages and hence their impact on voltage stability.

  7. Refrigerated display cabinets; Butikskyla

    Energy Technology Data Exchange (ETDEWEB)

    Fahlen, Per

    2000-07-01

    This report summarizes experience from SP research and assignments regarding refrigerated transport and storage of food, mainly in the retail sector. It presents the fundamentals of heat and mass transfer in display cabinets with special focus on indirect systems and secondary refrigerants. Moreover, the report includes a brief account of basic food hygiene and the related regulations. The material has been compiled for educational purposes in the Masters program at Chalmers Technical University.

  8. Reproducibility of magnetic resonance perfusion imaging.

    Directory of Open Access Journals (Sweden)

    Xiaomeng Zhang

    Full Text Available Dynamic MR biomarkers (T2*-weighted or susceptibility-based and T1-weighted or relaxivity-enhanced have been applied to assess tumor perfusion and its response to therapies. A significant challenge in the development of reliable biomarkers is a rigorous assessment and optimization of reproducibility. The purpose of this study was to determine the measurement reproducibility of T1-weighted dynamic contrast-enhanced (DCE-MRI and T2*-weighted dynamic susceptibility contrast (DSC-MRI with two contrast agents (CA of different molecular weight (MW: gadopentetate (Gd-DTPA, 0.5 kDa and Gadomelitol (P792, 6.5 kDa. Each contrast agent was tested with eight mice that had subcutaneous MDA-MB-231 breast xenograft tumors. Each mouse was imaged with a combined DSC-DCE protocol three times within one week to achieve measures of reproducibility. DSC-MRI results were evaluated with a contrast to noise ratio (CNR efficiency threshold. There was a clear signal drop (>95% probability threshold in the DSC of normal tissue, while signal changes were minimal or non-existent (<95% probability threshold in tumors. Mean within-subject coefficient of variation (wCV of relative blood volume (rBV in normal tissue was 11.78% for Gd-DTPA and 6.64% for P792. The intra-class correlation coefficient (ICC of rBV in normal tissue was 0.940 for Gd-DTPA and 0.978 for P792. The inter-subject correlation coefficient was 0.092. Calculated K(trans from DCE-MRI showed comparable reproducibility (mean wCV, 5.13% for Gd-DTPA, 8.06% for P792. ICC of K(trans showed high intra-subject reproducibility (ICC = 0.999/0.995 and inter-subject heterogeneity (ICC = 0.774. Histograms of K(trans distributions for three measurements had high degrees of overlap (sum of difference of the normalized histograms <0.01. These results represent homogeneous intra-subject measurement and heterogeneous inter-subject character of biological population, suggesting that perfusion MRI could be an imaging biomarker to

  9. Voltage Swells Improvement in Low Voltage Network Using Dynamic Voltage Restorer

    Directory of Open Access Journals (Sweden)

    R. Omar

    2011-01-01

    Full Text Available Problem statement: Voltage disturbances are the most common power quality problem due to the increased use of a large numbers of sophisticated electronic equipment in industrial distribution system. The voltage disturbances such as voltage sags, swells, harmonics, unbalance and flickers. High quality in the power supply is needed, since failures due to such disturbances usually have a high impact on production cost. There are many different solutions to compensate voltage disturbances but the use of a DVR is considered to be the most cost effective method. The objective of this study is to propose a new topology of a DVR in order to mitigate voltage swells using a powerful power custom device namely the Dynamic Voltage Restorer (DVR. Approach: New configuration of a DVR with an improvement of a controller based on direct-quadrature-zero method has been introduced to compensate voltage swells in the network. Results: The effectiveness of the DVR with its controller were verify using Matlab/Simulinks SimPower Toolbox and then implemented using 5KVA DVR experimental setup. Simulations and experimental results demonstrate the effective dynamic performance of the proposed configuration. Conclusion: The implimentation of the proposed DVR validate the capabilities in mitigating of voltage swells effectiveness.During voltage swells, the DVR injects an appropriate voltage to maintain the load voltage at its nominal value.

  10. Electroluminescence Gray Scale Display Driving Method and Circuit

    Institute of Scientific and Technical Information of China (English)

    KANG Hao; LI Rong-yu; YANG Xin

    2007-01-01

    The increasing use of color terminals for personal computers has raised a demand for video graphic adapter(VGA)-format panel displays. Since only monochrome(ZnS∶Mn) electroluminescence(EL) displays of suitable size and speed are available, lack of colors has to be replaced by grayscale in the first place. There are two basic driving methods to achieve grayscale in thin-film EL displays: pulse amplitude modulation(PAM) method and pulse width modulation(PWM) method. But there are serious disadvantages of the two traditional methods. For the former method, the high voltage PAM ICs are too expensive to produce the grayscale EL display in bulks and the driver integrated circuit(IC) is complex. Though the PWM method has good grayscale display quality, the hardware implementation is too complex. A new driving method with which the width and the amplitude of the pulse can be modulated and simultaneously the challenge can be solved efficaciously is presented.

  11. Book Display as Adult Service

    Directory of Open Access Journals (Sweden)

    Matthew S. Moore

    1997-03-01

    Full Text Available 無Book display as an adult service is defined as choosing and positioning adult books from the collection to increase their circulation. The author contrasts bookstore arrangement for sales versus library arrangement for access. The paper considers the library-as-a-whole as a display, examines the right size for an in-library display, and discusses mass displays, end-caps, on-shelf displays, and the Tiffany approach. The author proposes that an effective display depends on an imaginative, unifying theme, and that book displays are part of the joy of libraries.

  12. Handbook of Visual Display Technology

    CERN Document Server

    Cranton, Wayne; Fihn, Mark

    2012-01-01

    The Handbook of Visual Display Technology is a unique work offering a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. An invaluable compilation of information, the Handbook will serve as a single reference source with expert contributions from over 150 international display professionals and academic researchers. All classes of display device are covered including LCDs, reflective displays, flexible solutions and emissive devices such as OLEDs and plasma displays, with discussion of established principles, emergent technologies, and particular areas of application. The wide-ranging content also encompasses the fundamental science of light and vision, image manipulation, core materials and processing techniques, display driving and metrology.

  13. Open and reproducible global land use classification

    Science.gov (United States)

    Nüst, Daniel; Václavík, Tomáš; Pross, Benjamin

    2015-04-01

    Researchers led by the Helmholtz Centre for Environmental research (UFZ) developed a new world map of land use systems based on over 30 diverse indicators (http://geoportal.glues.geo.tu-dresden.de/stories/landsystemarchetypes.html) of land use intensity, climate and environmental and socioeconomic factors. They identified twelve land system archetypes (LSA) using a data-driven classification algorithm (self-organizing maps) to assess global impacts of land use on the environment, and found unexpected similarities across global regions. We present how the algorithm behind this analysis can be published as an executable web process using 52°North WPS4R (https://wiki.52north.org/bin/view/Geostatistics/WPS4R) within the GLUES project (http://modul-a.nachhaltiges-landmanagement.de/en/scientific-coordination-glues/). WPS4R is an open source collaboration platform for researchers, analysts and software developers to publish R scripts (http://www.r-project.org/) as a geo-enabled OGC Web Processing Service (WPS) process. The interoperable interface to call the geoprocess allows both reproducibility of the analysis and integration of user data without knowledge about web services or classification algorithms. The open platform allows everybody to replicate the analysis in their own environments. The LSA WPS process has several input parameters, which can be changed via a simple web interface. The input parameters are used to configure both the WPS environment and the LSA algorithm itself. The encapsulation as a web process allows integration of non-public datasets, while at the same time the publication requires a well-defined documentation of the analysis. We demonstrate this platform specifically to domain scientists and show how reproducibility and open source publication of analyses can be enhanced. We also discuss future extensions of the reproducible land use classification, such as the possibility for users to enter their own areas of interest to the system and

  14. Nonlinear sequential laminates reproducing hollow sphere assemblages

    Science.gov (United States)

    Idiart, Martín I.

    2007-07-01

    A special class of nonlinear porous materials with isotropic 'sequentially laminated' microstructures is found to reproduce exactly the hydrostatic behavior of 'hollow sphere assemblages'. It is then argued that this result supports the conjecture that Gurson's approximate criterion for plastic porous materials, and its viscoplastic extension of Leblond et al. (1994), may actually yield rigorous upper bounds for the hydrostatic flow stress of porous materials containing an isotropic, but otherwise arbitrary, distribution of porosity. To cite this article: M.I. Idiart, C. R. Mecanique 335 (2007).

  15. Response to Comment on "Estimating the reproducibility of psychological science".

    Science.gov (United States)

    Anderson, Christopher J; Bahník, Štěpán; Barnett-Cowan, Michael; Bosco, Frank A; Chandler, Jesse; Chartier, Christopher R; Cheung, Felix; Christopherson, Cody D; Cordes, Andreas; Cremata, Edward J; Della Penna, Nicolas; Estel, Vivien; Fedor, Anna; Fitneva, Stanka A; Frank, Michael C; Grange, James A; Hartshorne, Joshua K; Hasselman, Fred; Henninger, Felix; van der Hulst, Marije; Jonas, Kai J; Lai, Calvin K; Levitan, Carmel A; Miller, Jeremy K; Moore, Katherine S; Meixner, Johannes M; Munafò, Marcus R; Neijenhuijs, Koen I; Nilsonne, Gustav; Nosek, Brian A; Plessow, Franziska; Prenoveau, Jason M; Ricker, Ashley A; Schmidt, Kathleen; Spies, Jeffrey R; Stieger, Stefan; Strohminger, Nina; Sullivan, Gavin B; van Aert, Robbie C M; van Assen, Marcel A L M; Vanpaemel, Wolf; Vianello, Michelangelo; Voracek, Martin; Zuni, Kellylynn

    2016-03-01

    Gilbert et al. conclude that evidence from the Open Science Collaboration's Reproducibility Project: Psychology indicates high reproducibility, given the study methodology. Their very optimistic assessment is limited by statistical misconceptions and by causal inferences from selectively interpreted, correlational data. Using the Reproducibility Project: Psychology data, both optimistic and pessimistic conclusions about reproducibility are possible, and neither are yet warranted.

  16. Voltage Dependence of Supercapacitor Capacitance

    Directory of Open Access Journals (Sweden)

    Szewczyk Arkadiusz

    2016-09-01

    Full Text Available Electronic Double-Layer Capacitors (EDLC, called Supercapacitors (SC, are electronic devices that are capable to store a relatively high amount of energy in a small volume comparing to other types of capacitors. They are composed of an activated carbon layer and electrolyte solution. The charge is stored on electrodes, forming the Helmholtz layer, and in electrolyte. The capacitance of supercapacitor is voltage- dependent. We propose an experimental method, based on monitoring of charging and discharging a supercapacitor, which enables to evaluate the charge in an SC structure as well as the Capacitance-Voltage (C-V dependence. The measurement setup, method and experimental results of charging/discharging commercially available supercapacitors in various voltage and current conditions are presented. The total charge stored in an SC structure is proportional to the square of voltage at SC electrodes while the charge on electrodes increases linearly with the voltage on SC electrodes. The Helmholtz capacitance increases linearly with the voltage bias while a sublinear increase of total capacitance was found. The voltage on SC increases after the discharge of electrodes due to diffusion of charges from the electrolyte to the electrodes. We have found that the recovery voltage value is linearly proportional to the initial bias voltage value.

  17. Heart rate variability reproducibility during exercise.

    Science.gov (United States)

    McNarry, Melitta A; Lewis, Michael J

    2012-07-01

    The use of heart rate variability (HRV) parameters during exercise is not supported by appropriate reliability studies. In 80 healthy adults, ECG was recorded during three 6 min bouts of exercise, separated by 6 min of unloaded cycling. Two bouts were at a moderate intensity while the final bout was at a heavy exercise intensity. This protocol was repeated under the same conditions on three occasions, with a controlled start time (pre-determined at the first visit). Standard time and frequency domain indices of HRV were derived. Reliability was assessed by Bland–Altman plots, 95% limits of agreement and intraclass correlation coefficients (ICC). The sample size required to detect a mean difference ≥30% of the between-subject standard deviation was also estimated. There was no systematic change between days. All HRV parameters demonstrated a high degree of reproducibility during baseline (ICC range: 0.58–0.75), moderate (ICC: 0.58–0.85) and heavy intensity exercise (ICC range: 0.40–0.76). The reproducibility was slightly diminished during heavy intensity exercise relative to both unloaded baseline cycling and moderate exercise. This study indicates that HRV parameters can be reliably determined during exercise, and it underlines the importance of standardizing exercise intensity with regard to fitness levels if HRV is to be reliably determined.

  18. Latest development of display technologies

    Science.gov (United States)

    Gao, Hong-Yue; Yao, Qiu-Xiang; Liu, Pan; Zheng, Zhi-Qiang; Liu, Ji-Cheng; Zheng, Hua-Dong; Zeng, Chao; Yu, Ying-Jie; Sun, Tao; Zeng, Zhen-Xiang

    2016-09-01

    In this review we will focus on recent progress in the field of two-dimensional (2D) and three-dimensional (3D) display technologies. We present the current display materials and their applications, including organic light-emitting diodes (OLEDs), flexible OLEDs quantum dot light emitting diodes (QLEDs), active-matrix organic light emitting diodes (AMOLEDs), electronic paper (E-paper), curved displays, stereoscopic 3D displays, volumetric 3D displays, light field 3D displays, and holographic 3D displays. Conventional 2D display devices, such as liquid crystal devices (LCDs) often result in ambiguity in high-dimensional data images because of lacking true depth information. This review thus provides a detailed description of 3D display technologies.

  19. Reproducibility and reusability of scientific software

    Science.gov (United States)

    Shamir, Lior

    2017-01-01

    Information science and technology has been becoming an integral part of astronomy research, and due to the consistent growth in the size and impact of astronomical databases, that trend is bound to continue. While software is a vital part information systems and data analysis processes, in many cases the importance of the software and the standards of reporting on the use of source code has not yet elevated in the scientific communication process to the same level as other parts of the research. The purpose of the discussion is to examine the role of software in the scientific communication process in the light of transparency, reproducibility, and reusability of the research, as well as discussing software in astronomy in comparison to other disciplines.

  20. PSYCHOLOGY. Estimating the reproducibility of psychological science.

    Science.gov (United States)

    2015-08-28

    Reproducibility is a defining feature of science, but the extent to which it characterizes current research is unknown. We conducted replications of 100 experimental and correlational studies published in three psychology journals using high-powered designs and original materials when available. Replication effects were half the magnitude of original effects, representing a substantial decline. Ninety-seven percent of original studies had statistically significant results. Thirty-six percent of replications had statistically significant results; 47% of original effect sizes were in the 95% confidence interval of the replication effect size; 39% of effects were subjectively rated to have replicated the original result; and if no bias in original results is assumed, combining original and replication results left 68% with statistically significant effects. Correlational tests suggest that replication success was better predicted by the strength of original evidence than by characteristics of the original and replication teams.

  1. Poor reproducibility of allergic rhinitis SNP associations.

    Directory of Open Access Journals (Sweden)

    Daniel Nilsson

    Full Text Available Replication of reported associations is crucial to the investigation of complex disease. More than 100 SNPs have previously been reported as associated with allergic rhinitis (AR, but few of these have been replicated successfully. To investigate the general reproducibility of reported AR-associations in candidate gene studies, one Swedish (352 AR-cases, 709 controls and one Singapore Chinese population (948 AR-cases, 580 controls were analyzed using 49 AR-associated SNPs. The overall pattern of P-values indicated that very few of the investigated SNPs were associated with AR. Given published odds ratios (ORs most SNPs showed high power to detect an association, but no correlations were found between the ORs of the two study populations or with published ORs. None of the association signals were in common to the two genome-wide association studies published in AR, indicating that the associations represent false positives or have much lower effect-sizes than reported.

  2. Is Grannum grading of the placenta reproducible?

    Science.gov (United States)

    Moran, Mary; Ryan, John; Brennan, Patrick C.; Higgins, Mary; McAuliffe, Fionnuala M.

    2009-02-01

    Current ultrasound assessment of placental calcification relies on Grannum grading. The aim of this study was to assess if this method is reproducible by measuring inter- and intra-observer variation in grading placental images, under strictly controlled viewing conditions. Thirty placental images were acquired and digitally saved. Five experienced sonographers independently graded the images on two separate occasions. In order to eliminate any technological factors which could affect data reliability and consistency all observers reviewed images at the same time. To optimise viewing conditions ambient lighting was maintained between 25-40 lux, with monitors calibrated to the GSDF standard to ensure consistent brightness and contrast. Kappa (κ) analysis of the grades assigned was used to measure inter- and intra-observer reliability. Intra-observer agreement had a moderate mean κ-value of 0.55, with individual comparisons ranging from 0.30 to 0.86. Two images saved from the same patient, during the same scan, were each graded as I, II and III by the same observer. A mean κ-value of 0.30 (range from 0.13 to 0.55) indicated fair inter-observer agreement over the two occasions and only one image was graded consistently the same by all five observers. The study findings confirmed the lack of reproducibility associated with Grannum grading of the placenta despite optimal viewing conditions and highlight the need for new methods of assessing placental health in order to improve neonatal outcomes. Alternative methods for quantifying placental calcification such as a software based technique and 3D ultrasound assessment need to be explored.

  3. Cataloging altered gene expression in young and senescent cells using enhanced differential display

    NARCIS (Netherlands)

    Linskens, Maarten H.K.; Feng, Junli; Andrews, William H.; Enlow, Brett E.; Saati, Shahin M.; Tonkin, Leath A.; Funk, Walter D.; Villeponteau, Bryant

    1995-01-01

    Recently, a novel PCR-based technique, differential display (DD), has facilitated the study of differentially expressed genes at the mRNA level. We report here an improved version of DD, which we call Enhanced Differential Display (EDD). We have modified the technique to enhance reproducibility and

  4. Geometrical Configuration of Cabling as Factor Influencing the Reproducibility of EMC Immunity Tests

    Directory of Open Access Journals (Sweden)

    I. Szolik

    2006-12-01

    Full Text Available The paper deals with analysis of the influence of geometrical configuration of device cabling upon voltages induced in cable interfaces. The analyzed properties are the cable height and the cable length for common mode disturbance, and the loop width for differential mode disturbance. The analysis is solved both by analytical calculation and by numerical simulation. Achieved results are compared mutually as well as with results obtained by measurements performed according to standardized procedures. Finally the analyzed parameters are ordered in correspondence of their importance for objectivity and reproducibility of immunity tests against electromagnetic field.

  5. LHCb Event display

    CERN Document Server

    Trisovic, Ana

    2014-01-01

    The LHCb Event Display was made for educational purposes at the European Organization for Nuclear Research, CERN in Geneva, Switzerland. The project was implemented as a stand-alone application using C++ and ROOT, a framework developed by CERN for data analysis. This paper outlines the development and architecture of the application in detail, as well as the motivation for the development and the goals of the exercise. The application focuses on the visualization of events recorded by the LHCb detector, where an event represents a set of charged particle tracks in one proton-proton collision. Every particle track is coloured by its type and can be selected to see its essential information such as mass and momentum. The application allows students to save this information and calculate the invariant mass for any pair of particles. Furthermore, the students can use additional calculating tools in the application and build up a histogram of these invariant masses. The goal for the students is to find a $D^0$ par...

  6. Colorimetry for CRT displays.

    Science.gov (United States)

    Golz, Jürgen; MacLeod, Donald I A

    2003-05-01

    We analyze the sources of error in specifying color in CRT displays. These include errors inherent in the use of the color matching functions of the CIE 1931 standard observer when only colorimetric, not radiometric, calibrations are available. We provide transformation coefficients that prove to correct the deficiencies of this observer very well. We consider four different candidate sets of cone sensitivities. Some of these differ substantially; variation among candidate cone sensitivities exceeds the variation among phosphors. Finally, the effects of the recognized forms of observer variation on the visual responses (cone excitations or cone contrasts) generated by CRT stimuli are investigated and quantitatively specified. Cone pigment polymorphism gives rise to variation of a few per cent in relative excitation by the different phosphors--a variation larger than the errors ensuing from the adoption of the CIE standard observer, though smaller than the differences between some candidate cone sensitivities. Macular pigmentation has a larger influence, affecting mainly responses to the blue phosphor. The estimated combined effect of all sources of observer variation is comparable in magnitude with the largest differences between competing cone sensitivity estimates but is not enough to disrupt very seriously the relation between the L and M cone weights and the isoluminance settings of individual observers. It is also comparable with typical instrumental colorimetric errors, but we discuss these only briefly.

  7. Wearable wireless tactile display for virtual interactions with soft bodies

    Directory of Open Access Journals (Sweden)

    Gabriele eFrediani

    2014-09-01

    Full Text Available We describe here a wearable, wireless, compact and lightweight tactile display, able to mechanically stimulate the fingertip of users, so as to simulate contact with soft bodies in virtual environments. The device was based on dielectric elastomer actuators, as high-performance electromechanically active polymers. The actuator was arranged at the user’s fingertip, integrated within a plastic case, which also hosted a compact high-voltage circuitry. A custom-made wireless control unit was arranged on the forearm and connected to the display via low-voltage leads. We present the structure of the device and a characterization of it, in terms of electromechanical response and stress relaxation. Furthermore, we present results of a psychophysical test aimed at assessing the ability of the system to generate different levels of force that can be perceived by users.

  8. Data Display in Qualitative Research

    Directory of Open Access Journals (Sweden)

    Susana Verdinelli PsyD

    2013-02-01

    Full Text Available Visual displays help in the presentation of inferences and conclusions and represent ways of organizing, summarizing, simplifying, or transforming data. Data displays such as matrices and networks are often utilized to enhance data analysis and are more commonly seen in quantitative than in qualitative studies. This study reviewed the data displays used by three prestigious qualitative research journals within a period of three years. The findings include the types of displays used in these qualitative journals, the frequency of use, and the purposes for using visual displays as opposed to presenting data in text.

  9. Voltage Sensors Monitor Harmful Static

    Science.gov (United States)

    2009-01-01

    A tiny sensor, small enough to be worn on clothing, now monitors voltage changes near sensitive instruments after being created to alert Agency workers to dangerous static buildup near fuel operations and avionics. San Diego s Quasar Federal Systems received a Small Business Innovation Research (SBIR) contract from Kennedy Space Center to develop its remote voltage sensor (RVS), a dime-sized electrometer designed to measure triboelectric changes in the environment. One of the unique qualities of the RVS is that it can detect static at greater distances than previous devices, measuring voltage changes from a few centimeters to a few meters away, due to its much-improved sensitivity.

  10. Unique interactive projection display screen

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.

    1997-11-01

    Projection systems continue to be the best method to produce large (1 meter and larger) displays. However, in order to produce a large display, considerable volume is typically required. The Polyplanar Optic Display (POD) is a novel type of projection display screen, which for the first time, makes it possible to produce a large projection system that is self-contained and only inches thick. In addition, this display screen is matte black in appearance allowing it to be used in high ambient light conditions. This screen is also interactive and can be remotely controlled via an infrared optical pointer resulting in mouse-like control of the display. Furthermore, this display need not be flat since it can be made curved to wrap around a viewer as well as being flexible.

  11. Are classifications of proximal radius fractures reproducible?

    Directory of Open Access Journals (Sweden)

    dos Santos João BG

    2009-10-01

    Full Text Available Abstract Background Fractures of the proximal radius need to be classified in an appropriate and reproducible manner. The aim of this study was to assess the reliability of the three most widely used classification systems. Methods Elbow radiographs images of patients with proximal radius fractures were classified according to Mason, Morrey, and Arbeitsgemeinschaft für osteosynthesefragen/Association for the Study of Internal Fixation (AO/ASIF classifications by four observers with different experience with this subject to assess their intra- and inter-observer agreement. Each observer analyzed the images on three different occasions on a computer with numerical sequence randomly altered. Results We found that intra-observer agreement of Mason and Morrey classifications were satisfactory (κ = 0.582 and 0.554, respectively, while the AO/ASIF classification had poor intra-observer agreement (κ = 0.483. Inter-observer agreement was higher in the Mason (κ = 0.429-0.560 and Morrey (κ = 0.319-0.487 classifications than in the AO/ASIF classification (κ = 0.250-0.478, which showed poor reliability. Conclusion Inter- and intra-observer agreement of the Mason and Morey classifications showed overall satisfactory reliability when compared to the AO/ASIF system. The Mason classification is the most reliable system.

  12. The reproducible radio outbursts of SS Cygni

    Science.gov (United States)

    Russell, T. D.; Miller-Jones, J. C. A.; Sivakoff, G. R.; Altamirano, D.; O'Brien, T. J.; Page, K. L.; Templeton, M. R.; Körding, E. G.; Knigge, C.; Rupen, M. P.; Fender, R. P.; Heinz, S.; Maitra, D.; Markoff, S.; Migliari, S.; Remillard, R. A.; Russell, D. M.; Sarazin, C. L.; Waagen, E. O.

    2016-08-01

    We present the results of our intensive radio observing campaign of the dwarf nova SS Cyg during its 2010 April outburst. We argue that the observed radio emission was produced by synchrotron emission from a transient radio jet. Comparing the radio light curves from previous and subsequent outbursts of this system (including high-resolution observations from outbursts in 2011 and 2012) shows that the typical long and short outbursts of this system exhibit reproducible radio outbursts that do not vary significantly between outbursts, which is consistent with the similarity of the observed optical, ultraviolet and X-ray light curves. Contemporaneous optical and X-ray observations show that the radio emission appears to have been triggered at the same time as the initial X-ray flare, which occurs as disc material first reaches the boundary layer. This raises the possibility that the boundary region may be involved in jet production in accreting white dwarf systems. Our high spatial resolution monitoring shows that the compact jet remained active throughout the outburst with no radio quenching.

  13. The reproducible radio outbursts of SS Cygni

    CERN Document Server

    Russell, T D; Sivakoff, G R; Altamirano, D; O'Brien, T J; Page, K L; Templeton, M R; Koerding, E G; Knigge, C; Rupen, M P; Fender, R P; Heinz, S; Maitra, D; Markoff, S; Migliari, S; Remillard, R A; Russell, D M; Sarazin, C L; Waagen, E O

    2016-01-01

    We present the results of our intensive radio observing campaign of the dwarf nova SS Cyg during its 2010 April outburst. We argue that the observed radio emission was produced by synchrotron emission from a transient radio jet. Comparing the radio light curves from previous and subsequent outbursts of this system (including high-resolution observations from outbursts in 2011 and 2012) shows that the typical long and short outbursts of this system exhibit reproducible radio outbursts that do not vary significantly between outbursts, which is consistent with the similarity of the observed optical, ultraviolet and X-ray light curves. Contemporaneous optical and X-ray observations show that the radio emission appears to have been triggered at the same time as the initial X-ray flare, which occurs as disk material first reaches the boundary layer. This raises the possibility that the boundary region may be involved in jet production in accreting white dwarf systems. Our high spatial resolution monitoring shows th...

  14. Reproducing the entropy structure in galaxy groups

    CERN Document Server

    Finoguenov, A; Tornatore, L; Böhringer, H

    2003-01-01

    We carry out a comparison between observations and hydrodynamic simulations of entropy profiles of groups and clusters of galaxies. We use the Tree+SPH GADGET code to simulate four halos of sizes in the M_500 = 1.0 - 16.e13 h^-1 Msun range, corresponding to poor groups up to Virgo-like clusters. We concentrate on the effect of introducing radiative cooling, star formation, and a variety of non-gravitational heating schemes on the entropy structure and the stellar fraction. We show that all the simulations result in a correct entropy profile for the Virgo-like cluster. With the heating energy budget of ~0.7 keV/particle injected at z_h=3, we are also able to reproduce the entropy profiles of groups. We obtain the flat entropy cores as a combined effect of preheating and cooling, while we achieve the high entropy at outskirts by preheating. The resulting baryon fraction locked into stars is in the 25-30% range, compared to 35-40% in the case of no preheating. Heating at higher redshift, z_h=9, strongly delays t...

  15. Reproducibility of neuroimaging analyses across operating systems.

    Science.gov (United States)

    Glatard, Tristan; Lewis, Lindsay B; Ferreira da Silva, Rafael; Adalat, Reza; Beck, Natacha; Lepage, Claude; Rioux, Pierre; Rousseau, Marc-Etienne; Sherif, Tarek; Deelman, Ewa; Khalili-Mahani, Najmeh; Evans, Alan C

    2015-01-01

    Neuroimaging pipelines are known to generate different results depending on the computing platform where they are compiled and executed. We quantify these differences for brain tissue classification, fMRI analysis, and cortical thickness (CT) extraction, using three of the main neuroimaging packages (FSL, Freesurfer and CIVET) and different versions of GNU/Linux. We also identify some causes of these differences using library and system call interception. We find that these packages use mathematical functions based on single-precision floating-point arithmetic whose implementations in operating systems continue to evolve. While these differences have little or no impact on simple analysis pipelines such as brain extraction and cortical tissue classification, their accumulation creates important differences in longer pipelines such as subcortical tissue classification, fMRI analysis, and cortical thickness extraction. With FSL, most Dice coefficients between subcortical classifications obtained on different operating systems remain above 0.9, but values as low as 0.59 are observed. Independent component analyses (ICA) of fMRI data differ between operating systems in one third of the tested subjects, due to differences in motion correction. With Freesurfer and CIVET, in some brain regions we find an effect of build or operating system on cortical thickness. A first step to correct these reproducibility issues would be to use more precise representations of floating-point numbers in the critical sections of the pipelines. The numerical stability of pipelines should also be reviewed.

  16. Design of PH sensor signal acquisition and display system

    Science.gov (United States)

    Qian, Huifa; Zhang, Quanzhu; Deng, Yonghong

    2017-06-01

    With the continuous development of sensor manufacturing technology, how to better deal with the signal is particularly important. PH value of the sensor voltage generated by the signal as a signal, through the MCU acquisition A / D conversion, and ultimately through the digital display of its PH value. The system uses hardware and software to achieve the results obtained with the high-precision PH meter to strive to improve the accuracy and reduce error.

  17. Fast-response liquid crystal display by the VA-IPS display mode with nematic liquid crystal and polymer networks

    Science.gov (United States)

    Chen, Tien-Jung; Lin, Guan-Jhong; Chen, Bo-Yu; Wu, Jin-Jei; Yang, Ying-Jay

    2012-10-01

    To improve electrooptical characteristics of the vertical aligned (VA) liquid crystal displays (LCDs), the monomer material and in-plane switching (IPS) field produced by interdigital electrodes are employed in LC cells. The fast switching response and well optical transmittance of the VA-IPS display mode are successfully achieved by mixing the nematic LC with polymer networks, attributed to the surface anchoring, and the molecular orientation of the LC cell will be further governed, especially under the greater applied voltage. Furthermore, the high concentration doping of the monomer can effectively improve the response behavior, but it also results in the transmittance sacrificed due to the light scattering, and the threshold voltage (Vth) increased.

  18. Reproducibility of corpus cavernosum electromyography in healthy young man

    NARCIS (Netherlands)

    Jiang, X.; Frantzen, J.; Holsheimer, J.; Meuleman, E.

    2005-01-01

    Research on reproducibility of corpus cavernosum electromyography (CC-EMG) is relevant because reproducible signals indicate a biological phenomenon and not an artefact. Reproducible signals are also required to use CC-EMG as a diagnostic tool for erectile dysfunction. The aim of this study was to a

  19. Low Voltage Power Supply Incorporating Ceramic Transformer

    CERN Document Server

    Imori, M

    2007-01-01

    A low voltage power supply provides the regulated output voltage of 1 V from the supply voltage around 48 V. The low voltage power supply incorporates a ceramic transformer which utilizes piezoelectric effect to convert voltage. The ceramic transformer isolates the secondary from the primary, thus providing the ground isolation between the supply and the output voltages. The ceramic transformer takes the place of the conventional magnetic transformer. The ceramic transformer is constructed from a ceramic bar and does not include any magnetic material. So the low voltage power supply can operate under a magnetic field. The output voltage is stabilized by feedback. A feedback loop consists of an error amplifier, a voltage controlled oscillator and a driver circuit. The amplitude ratio of the transformer has dependence on the frequency, which is utilized to stabilize the output voltage. The low voltage power supply is investigated on the analogy of the high voltage power supply similarly incorporating the cerami...

  20. Augmented reality 3D display based on integral imaging

    Science.gov (United States)

    Deng, Huan; Zhang, Han-Le; He, Min-Yang; Wang, Qiong-Hua

    2017-02-01

    Integral imaging (II) is a good candidate for augmented reality (AR) display, since it provides various physiological depth cues so that viewers can freely change the accommodation and convergence between the virtual three-dimensional (3D) images and the real-world scene without feeling any visual discomfort. We propose two AR 3D display systems based on the theory of II. In the first AR system, a micro II display unit reconstructs a micro 3D image, and the mciro-3D image is magnified by a convex lens. The lateral and depth distortions of the magnified 3D image are analyzed and resolved by the pitch scaling and depth scaling. The magnified 3D image and real 3D scene are overlapped by using a half-mirror to realize AR 3D display. The second AR system uses a micro-lens array holographic optical element (HOE) as an image combiner. The HOE is a volume holographic grating which functions as a micro-lens array for the Bragg-matched light, and as a transparent glass for Bragg mismatched light. A reference beam can reproduce a virtual 3D image from one side and a reference beam with conjugated phase can reproduce the second 3D image from other side of the micro-lens array HOE, which presents double-sided 3D display feature.

  1. Modular High Voltage Power Supply

    Energy Technology Data Exchange (ETDEWEB)

    Newell, Matthew R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-18

    The goal of this project is to develop a modular high voltage power supply that will meet the needs of safeguards applications and provide a modular plug and play supply for use with standard electronic racks.

  2. Reliability criteria for voltage stability

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Carson W.; Silverstein, Brian L. [Bonneville Power Administration, Portland, OR (United States)

    1994-12-31

    In face of costs pressures, there is need to allocate scare resources more effectively in order to achieve voltage stability. This naturally leads to development of probabilistic criteria and notions of rick management. In this paper it is presented a discussion about criteria for long term voltage stability limited to the case in which the time frames are topically several minutes. (author) 14 refs., 1 fig.

  3. A Voltage Quality Detection Method

    DEFF Research Database (Denmark)

    Chen, Zhe; Wei, Mu

    2008-01-01

    This paper presents a voltage quality detection method based on a phase-locked loop (PLL) technique. The technique can detect the voltage magnitude and phase angle of each individual phase under both normal and fault power system conditions. The proposed method has the potential to evaluate vario...... power quality disturbances, such as interruptions, sags and imbalances. Simulation studies have been performed. The effectiveness of the proposed method has been demonstrated under the simulated typical power disturbances....

  4. Rapid display of radiographic images

    Science.gov (United States)

    Cox, Jerome R., Jr.; Moore, Stephen M.; Whitman, Robert A.; Blaine, G. James; Jost, R. Gilbert; Karlsson, L. M.; Monsees, Thomas L.; Hassen, Gregory L.; David, Timothy C.

    1991-07-01

    The requirements for the rapid display of radiographic images exceed the capabilities of widely available display, computer, and communications technologies. Computed radiography captures data with a resolution of about four megapixels. Large-format displays are available that can present over four megapixels. One megapixel displays are practical for use in combination with large-format displays and in areas where the viewing task does not require primary diagnosis. This paper describes an electronic radiology system that approximates the highest quality systems, but through the use of several interesting techniques allows the possibility of its widespread installation throughout hospitals. The techniques used can be grouped under three major system concepts: a local, high-speed image server, one or more physician's workstations each with one or more high-performance auxiliary displays specialized to the radiology viewing task, and dedicated, high-speed communication links between the server and the displays. This approach is enhanced by the use of a progressive transmission scheme to decrease the latency for viewing four megapixel images. The system includes an image server with storage for over 600 4-megapixel images and a high-speed link. A subsampled megapixel image is fetched from disk and transmitted to the display in about one second followed by the full resolution 4-megapixel image in about 2.5 seconds. Other system components include a megapixel display with a 6-megapixel display memory space and frame-rate update of image roam, zoom, and contrast. Plans for clinical use are presented.

  5. Military display market segment: helicopters

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    2004-09-01

    The military display market is analyzed in terms of one of its segments: helicopter displays. Parameters requiring special consideration, to include luminance ranges, contrast ratio, viewing angles, and chromaticity coordinates, are examined. Performance requirements for rotary-wing displays relative to several premier applications are summarized. Display sizes having aggregate defense applications of 5,000 units or greater and having DoD applications across 10 or more platforms, are tabulated. The issue of size commonality is addressed where distribution of active area sizes across helicopter platforms, individually, in groups of two through nine, and ten or greater, is illustrated. Rotary-wing displays are also analyzed by technology, where total quantities of such displays are broken out into CRT, LCD, AMLCD, EM, LED, Incandescent, Plasma and TFEL percentages. Custom, versus Rugged commercial, versus commercial off-the-shelf designs are contrasted. High and low information content designs are identified. Displays for several high-profile military helicopter programs are discussed, to include both technical specifications and program history. The military display market study is summarized with breakouts for the helicopter market segment. Our defense-wide study as of March 2004 has documented 1,015,494 direct view and virtual image displays distributed across 1,181 display sizes and 503 weapon systems. Helicopter displays account for 67,472 displays (just 6.6% of DoD total) and comprise 83 sizes (7.0% of total DoD) in 76 platforms (15.1% of total DoD). Some 47.6% of these rotary-wing applications involve low information content displays comprising just a few characters in one color; however, as per fixed-wing aircraft, the predominant instantiation involves higher information content units capable of showing changeable graphics, color and video.

  6. Reversible and Reproducible Giant Universal Electroresistance Effect

    Institute of Scientific and Technical Information of China (English)

    SYED Rizwan; ZHANG Sen; YU Tian; ZHAO Yong-Gang; ZHANG Shu-Feng; HAN Xiu-Feng

    2011-01-01

    After the prediction of the giant electroresistance effect, much work has been carried out to find this effect in practical devices. We demonstrate a novel way to obtain a large electroresistance (ER) effect in the multilayer system at room temperature. The current-in-plane (CIP) electric transport measurement is performed on the multilayer structure consisting of (011)-Pb(Mg1/3Nb2/3)O3-PbTiO3(PMN-PT)/Ta/Al-O/metal. It is found that the resistance of the top metallic layer shows a hysteretic behavior as a function electric field, which corresponds well with the substrate polarization versus electric Reid (P-E) loop. This reversible hysteretic R-E behavior is independent of the applied magnetic field as well as the magnetic structure of the top metallic layer and keeps its memory state. This novel memory effect is attributed to the polarization reversal induced electrostatic potential, which is felt throughout the multilayer stack and is enhanced by the dielectric Al-O layer producing unique hysteretic, reversible, and reproducible resistance switching behavior. This novel universal electroresistance effect will open a new gateway to the development of future multiferroic memory devices operating at room temperature.%After the prediction of the giant electroresistance effect,much work has been carried out to find this effect in practical devices.We demonstrate a novel way to obtain a large electroresistance (ER) effect in the multilayer system at room temperature.The current-in-plane (CIP) electric transport measurement is performed on the multilayer structure consisting of (011)-Pb(Mg1/3 Nb2/3) O3-PbTiO3 (PMN-PT)/Ta/Al-O/metal.It is found that the resistance of the top metallic layer shows a hysteretic behavior as a function electric field,which corresponds well with the substrate polarization versus electric field (P-E) loop.This reversible hysteretic R-E behavior is independent of the applied magnetic field as well as the magnetic structure of the top metallic

  7. A matter of quantum voltages.

    Science.gov (United States)

    Sellner, Bernhard; Kathmann, Shawn M

    2014-11-14

    Voltages inside matter are relevant to crystallization, materials science, biology, catalysis, and aqueous chemistry. The variation of voltages in matter can be measured by experiment, however, modern supercomputers allow the calculation of accurate quantum voltages with spatial resolutions of bulk systems well beyond what can currently be measured provided a sufficient level of theory is employed. Of particular interest is the Mean Inner Potential (V(o))--the spatial average of these quantum voltages referenced to the vacuum. Here we establish a protocol to reliably evaluate V(o) from quantum calculations. Voltages are very sensitive to the distribution of electrons and provide metrics to understand interactions in condensed phases. In the present study, we find excellent agreement with measurements of V(o) for vitrified water and salt crystals and demonstrate the impact of covalent and ionic bonding as well as intermolecular/atomic interactions. Certain aspects in this regard are highlighted making use of simple model systems/approximations. Furthermore, we predict V(o) as well as the fluctuations of these voltages in aqueous NaCl electrolytes and characterize the changes in their behavior as the resolution increases below the size of atoms.

  8. X-1 on display

    Science.gov (United States)

    1949-01-01

    A Bell Aircraft Corporation X-1 series aircraft on display at an Open House at NACA Muroc Flight Test Unit or High-Speed Flight Research Station hangar on South Base of Edwards Air Force Base, California. (The precise date of the photo is uncertain, but it is probably before 1948.) The instrumentation that was carried aboard the aircraft to gather data is on display. The aircraft data was recorded on oscillograph film that was read, calibrated, and converted into meaningful parameters for the engineers to evaluate from each research flight. In the background of the photo are several early U.S. jets. These include several Lockheed P-80 Shooting Stars, which were used as chase planes on X-1 flights; two Bell P-59 Airacomets, the first U.S. jet pursuit aircraft (fighter in later parlance); and a prototype Republic XP-84 Thunderjet. There were five versions of the Bell X-1 rocket-powered research aircraft that flew at the NACA High-Speed Flight Research Station, Edwards, California. The bullet-shaped X-1 aircraft were built by Bell Aircraft Corporation, Buffalo, N.Y. for the U.S. Army Air Forces (after 1947, U.S. Air Force) and the National Advisory Committee for Aeronautics (NACA). The X-1 Program was originally designated the XS-1 for eXperimental Sonic. The X-1's mission was to investigate the transonic speed range (speeds from just below to just above the speed of sound) and, if possible, to break the 'sound barrier.' Three different X-1s were built and designated: X-1-1, X-1-2 (later modified to become the X-1E), and X-1-3. The basic X-1 aircraft were flown by a large number of different pilots from 1946 to 1951. The X-1 Program not only proved that humans could go beyond the speed of sound, it reinforced the understanding that technological barriers could be overcome. The X-1s pioneered many structural and aerodynamic advances including extremely thin, yet extremely strong wing sections; supersonic fuselage configurations; control system requirements; powerplant

  9. VOLTAGE COMPENSATION USING ARTIFICIAL NEURAL NETWORK

    African Journals Online (AJOL)

    VOLTAGE COMPENSATION USING ARTIFICIAL NEURAL NETWORK: A CASE STUDY OF RUMUOLA DISTRIBUTION NETWORK. ... The artificial neural networks controller engaged to controlling the dynamic voltage ... Article Metrics.

  10. Laser illuminated flat panel display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.

    1995-12-31

    A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  11. Research Reproducibility in Geosciences: Current Landscape, Practices and Perspectives

    Science.gov (United States)

    Yan, An

    2016-04-01

    Reproducibility of research can gauge the validity of its findings. Yet currently we lack understanding of how much of a problem research reproducibility is in geosciences. We developed an online survey on faculty and graduate students in geosciences, and received 136 responses from research institutions and universities in Americas, Asia, Europe and other parts of the world. This survey examined (1) the current state of research reproducibility in geosciences by asking researchers' experiences with unsuccessful replication work, and what obstacles that lead to their replication failures; (2) the current reproducibility practices in community by asking what efforts researchers made to try to reproduce other's work and make their own work reproducible, and what the underlying factors that contribute to irreproducibility are; (3) the perspectives on reproducibility by collecting researcher's thoughts and opinions on this issue. The survey result indicated that nearly 80% of respondents who had ever reproduced a published study had failed at least one time in reproducing. Only one third of the respondents received helpful feedbacks when they contacted the authors of a published study for data, code, or other information. The primary factors that lead to unsuccessful replication attempts are insufficient details of instructions in published literature, and inaccessibility of data, code and tools needed in the study. Our findings suggest a remarkable lack of research reproducibility in geoscience. Changing the incentive mechanism in academia, as well as developing policies and tools that facilitate open data and code sharing are the promising ways for geosciences community to alleviate this reproducibility problem.

  12. Presentation of Various Tactile Sensations Using Micro-Needle Electrotactile Display.

    Science.gov (United States)

    Tezuka, Mayuko; Kitamura, Norihide; Tanaka, Kohei; Miki, Norihisa

    2016-01-01

    Tactile displays provoke tactile sensations by artificially stimulating tactile receptors. While many types of tactile displays have been developed, electrotactile displays that exploit electric stimulation can be designed to be thin, light, flexible and thus, wearable. However, the high voltages required to stimulate tactile receptors and limited varieties of possible sensations pose problems. In our previous work, we developed an electrotactile display using a micro-needle electrode array that can drastically reduce the required voltage by penetrating through the high-impedance stratum corneum painlessly, but displaying various tactile sensations was still a challenge. In this work, we demonstrate presentation of tactile sensation of different roughness to the subjects, which is enabled by the arrangement of the electrodes; the needle electrodes are on the fingertip and the ground electrode is on the fingernail. With this arrangement, the display can stimulate the tactile receptors that are located not only in the shallow regions of the finger but also those in the deep regions. It was experimentally revealed that the required voltage was further reduced compared to previous devices and that the roughness presented by the display was controlled by the pulse frequency and the switching time, or the stimulation flow rate. The proposed electrotactile display is readily applicable as a new wearable haptic device for advanced information communication technology.

  13. Miniature information displays: primary applications

    Science.gov (United States)

    Alvelda, Phillip; Lewis, Nancy D.

    1998-04-01

    Positioned to replace current liquid crystal display technology in many applications, miniature information displays have evolved to provide several truly portable platforms for the world's growing personal computing and communication needs. The technology and functionality of handheld computer and communicator systems has finally surpassed many of the standards that were originally established for desktop systems. In these new consumer electronics, performance, display size, packaging, power consumption, and cost have always been limiting factors for fabricating genuinely portable devices. The rapidly growing miniature information display manufacturing industry is making it possible to bring a wide range of highly anticipated new products to new markets.

  14. Colorimetric evaluation of display performance

    Science.gov (United States)

    Kosmowski, Bogdan B.

    2001-08-01

    The development of information techniques, using new technologies, physical phenomena and coding schemes, enables new application areas to be benefited form the introduction of displays. The full utilization of the visual perception of a human operator, requires the color coding process to be implemented. The evolution of displays, from achromatic (B&W) and monochromatic, to multicolor and full-color, enhances the possibilities of information coding, creating however a need for the quantitative methods of display parameter assessment. Quantitative assessment of color displays, restricted to photometric measurements of their parameters, is an estimate leading to considerable errors. Therefore, the measurements of a display's color properties have to be based on spectral measurements of the display and its elements. The quantitative assessment of the display system parameters should be made using colorimetric systems like CIE1931, CIE1976 LAB or LUV. In the paper, the constraints on the measurement method selection for the color display evaluation are discussed and the relations between their qualitative assessment and the ergonomic conditions of their application are also presented. The paper presents the examples of using LUV colorimetric system and color difference (Delta) E in the optimization of color liquid crystal displays.

  15. Maintenance Procedure Display: Head Mounted Display (HMD) Evaluations

    Science.gov (United States)

    Whitmore, Milrian; Litaker, Harry L., Jr.; Solem, Jody A.; Holden, Kritina L.; Hoffman, Ronald R.

    2007-01-01

    A viewgraph presentation describing maintenance procedures for head mounted displays is shown. The topics include: 1) Study Goals; 2) Near Eye Displays (HMDs); 3) Design; 4) Phase I-Evaluation Methods; 5) Phase 1 Results; 6) Improved HMD Mounting; 7) Phase 2 -Evaluation Methods; 8) Phase 2 Preliminary Results; and 9) Next Steps.

  16. Precision and reproducibility in AMS radiocarbon measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Hotchkis, M.A.; Fink, D.; Hua, Q.; Jacobsen, G.E.; Lawson, E. M.; Smith, A.M.; Tuniz, C. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1996-12-31

    Accelerator Mass Spectrometry (AMS) is a technique by which rare radioisotopes such as {sup 14}C can be measured at environmental levels with high efficiency. Instead of detecting radioactivity, which is very weak for long-lived environmental radioisotopes, atoms are counted directly. The sample is placed in an ion source, from which a negative ion beam of the atoms of interest is extracted, mass analysed, and injected into a tandem accelerator. After stripping to positive charge states in the accelerator HV terminal, the ions are further accelerated, analysed with magnetic and electrostatic devices and counted in a detector. An isotopic ratio is derived from the number of radioisotope atoms counted in a given time and the beam current of a stable isotope of the same element, measured after the accelerator. For radiocarbon, {sup 14}C/{sup 13}C ratios are usually measured, and the ratio of an unknown sample is compared to that of a standard. The achievable precision for such ratio measurements is limited primarily by {sup 14}C counting statistics and also by a variety of factors related to accelerator and ion source stability. At the ANTARES AMS facility at Lucas Heights Research Laboratories we are currently able to measure {sup 14}C with 0.5% precision. In the two years since becoming operational, more than 1000 {sup 14}C samples have been measured. Recent improvements in precision for {sup 14}C have been achieved with the commissioning of a 59 sample ion source. The measurement system, from sample changing to data acquisition, is under common computer control. These developments have allowed a new regime of automated multi-sample processing which has impacted both on the system throughput and the measurement precision. We have developed data evaluation methods at ANTARES which cross-check the self-consistency of the statistical analysis of our data. Rigorous data evaluation is invaluable in assessing the true reproducibility of the measurement system and aids in

  17. Electrode voltage fall and total voltage of a transient arc

    Science.gov (United States)

    Valensi, F.; Ratovoson, L.; Razafinimanana, M.; Masquère, M.; Freton, P.; Gleizes, A.

    2016-06-01

    This paper deals with an experimental study of the components of a transient arc total voltage with duration of a few tens of ms and a current peak close to 1000 A. The cathode tip is made of graphite whereas the flat anode is made either of copper or of graphite; the electrodes gap is a few mm. The analysis of the electrical parameters is supported and validated by fast imaging and by two models: the first one is a 2D physical model of the arc allowing to calculate both the plasma temperature field and the arc voltage; the second model is able to estimate the transient heating of the graphite electrode. The main aim of the study was to detect the possible change of the cathode voltage fall (CVF) during the first instants of the arc. Indeed it is expected that during the first ms the graphite cathode is rather cool and the main mechanism of the electron emission should be the field effect emission, whereas after several tens of ms the cathode is strongly heated and thermionic emission should be predominant. We have observed some change in the apparent CVF but we have shown that this apparent change can be attributed to the variation of the solid cathode resistance. On the other hand, the possible change of CVF corresponding to the transition between a ‘cold’ and a ‘hot’ cathode should be weak and could not be characterized considering our measurement uncertainty of about 2 V. The arc column voltage (ACV) was estimated by subtracting the electrode voltage fall from the total arc voltage. The experimental transient evolution of the ACV is in very good agreement with the theoretical variation predicted by the model, showing the good ability of the model to study this kind of transient arc.

  18. Updated defense display market assessment

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1999-08-01

    This paper addresses the number, function and size of principal military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. Principal military displays are defined as those occupying appreciable crewstation real-estate and/or those without which the platform could not carry out its intended mission. DoD 'office' applications are excluded from this study. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, angle, color, video capability, and night vision imaging system compatibility. Funded, future acquisitions, planned and predicted crewstation modification kits, and form-fit upgrades are taken into account. This paper provides an overview of the DoD niche market, allowing both government and industry a necessary reference by which to meet DoD requirements for military displays in a timely and cost-effective manner. The aggregate DoD installed base for direct-view and large-area military displays is presently estimated to be in excess of 313,000. Miniature displays are those which must be magnified to be viewed, involve a significantly different manufacturing paradigm and are used in helmet mounted displays and thermal weapon sight applications. Some 114,000 miniature displays are presently included within future weapon system acquisition plans. For vendor production planning purposes it is noted that foreign military sales could substantially increase these quantities. The vanishing vendor syndrome (VVS) for older display technologies continues to be a growing, pervasive problem throughout DoD, which consequently must leverage the more modern, especially flat panel, display technologies being developed to replace older, especially cathode ray tube, technology for civil-commercial markets. Total DoD display needs (FPD, HMD) are some 427,000.

  19. Unbalanced Voltage Compensation in Low Voltage Residential AC Grids

    DEFF Research Database (Denmark)

    Trintis, Ionut; Douglass, Philip; Munk-Nielsen, Stig

    2016-01-01

    This paper describes the design and test of a control algorithm for active front-end rectifiers that draw power from a residential AC grid to feed heat pump loads. The control algorithm is able to control the phase to neutral or phase to phase RMS voltages at the point of common coupling....... The voltage control was evaluated with either active or reactive independent phase load current control. The control performance in field operation in a residential grid situated in Bornholm, Denmark was investigated for different use cases....

  20. Automated Voltage Control in LHCb

    CERN Document Server

    Granado Cardoso, L; Jacobsson, R

    2011-01-01

    LHCb is one of the 4 LHC experiments. In order to ensure the safety of the detector and to maximize efficiency, LHCb needs to coordinate its own operations, in particular the voltage configuration of the different subdetectors, according to the accelerator status. A control software has been developed for this purpose, based on the Finite State Machine toolkit and the SCADA system used for control throughout LHCb (and the other LHC experiments). This software permits to efficiently drive both the Low Voltage (LV) and High Voltage (HV) systems of the 10 different sub-detectors that constitute LHCb, setting each sub-system to the required voltage (easily configurable at run-time) based on the accelerator state. The control software is also responsible for monitoring the state of the Sub-detector voltages and adding it to the event data in the form of status-bits. Safe and yet flexible operation of the LHCb detector has been obtained and automatic actions, triggered by the state changes of the ...

  1. Flexible Bistable Cholesteric Reflective Displays

    Science.gov (United States)

    Yang, Deng-Ke

    2006-03-01

    Cholesteric liquid crystals (ChLCs) exhibit two stable states at zero field condition-the reflecting planar state and the nonreflecting focal conic state. ChLCs are an excellent candidate for inexpensive and rugged electronic books and papers. This paper will review the display cell structure,materials and drive schemes for flexible bistable cholesteric (Ch) reflective displays.

  2. Electroluminescent Polymers and Carbon Nanotubes for Flat Panel Displays

    Institute of Scientific and Technical Information of China (English)

    Liming Dai; Limin Dong; Mei Gao; Shaoming Huang; Oddvar Johansen; Albert W.H.Mau,Zoran Vasic; Berthold Winkler; Yongyuang Yang

    2000-01-01

    polymeric light-emitting diodes(LEDs) with sufficient brightness. efficiencies, low driving voltages, and various interesting features have been reported. The relatively short device lifetime, however, still remains as a major problem to be solved before any commercial applications will be realized. In this regard,carbon nanotubes have recently been proposed as more robust electron field emitters for flat panel displays. We have synthesised large arrays of vertically aligned carbon nanotubes, from which micropatterns of the aligned nanotubes suitable for flat panel displays were fabricated on various substrates. In this paper, we summarise our work on the synthesis and microfabrication of electroluminescent polymers and carbon nanotubes for flat panel displays with reference to other complementary work as appropriate.

  3. Three-dimensional display technologies.

    Science.gov (United States)

    Geng, Jason

    2013-01-01

    The physical world around us is three-dimensional (3D), yet traditional display devices can show only two-dimensional (2D) flat images that lack depth (i.e., the third dimension) information. This fundamental restriction greatly limits our ability to perceive and to understand the complexity of real-world objects. Nearly 50% of the capability of the human brain is devoted to processing visual information [Human Anatomy & Physiology (Pearson, 2012)]. Flat images and 2D displays do not harness the brain's power effectively. With rapid advances in the electronics, optics, laser, and photonics fields, true 3D display technologies are making their way into the marketplace. 3D movies, 3D TV, 3D mobile devices, and 3D games have increasingly demanded true 3D display with no eyeglasses (autostereoscopic). Therefore, it would be very beneficial to readers of this journal to have a systematic review of state-of-the-art 3D display technologies.

  4. Development of a New Cascade Voltage-Doubler for Voltage Multiplication

    OpenAIRE

    Arash Toudeshki; Norman Mariun; Hashim Hizam; Noor Izzri Abdul Wahab

    2014-01-01

    For more than eight decades, cascade voltage-doubler circuits are used as a method to produce DC output voltage higher than the input voltage. In this paper, the topological developments of cascade voltage-doublers are reviewed. A new circuit configuration for cascade voltage-doubler is presented. This circuit can produce a higher value of the DC output voltage and better output quality compared to the conventional cascade voltage-doubler circuits, with the same number of stages.

  5. Low-Energy Real-Time OS Using Voltage Scheduling Algorithm for Variable Voltage Processors

    OpenAIRE

    Okuma, Takanori; Yasuura, Hiroto

    2001-01-01

    This paper presents a real-time OS based on $ mu $ITRON using proposed voltage scheduling algorithm for variable voltage processors which can vary supply voltage dynamically. The proposed voltage scheduling algorithms assign voltage level for each task dynamically in order to minimize energy consumption under timing constraints. Using the presented real-time OS, running tasks with low supply voltage leads to drastic energy reduction. In addition, the presented voltage scheduling algorithm is ...

  6. Simple buck/boost voltage regulator

    Science.gov (United States)

    Paulkovich, J.; Rodriguez, G. E.

    1980-01-01

    Circuit corrects low or high supply voltage, produces regulated output voltage. Circuit has fewer components because inductory/transformer combination and pulse-width modulator serve double duty. Regulator handles input voltage variation from as low as one half output voltage to as high as input transistor rating. Solar arrays, fuel cells, and thermionic generators might use this regulator.

  7. 30 CFR 18.47 - Voltage limitation.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Voltage limitation. 18.47 Section 18.47 Mineral... § 18.47 Voltage limitation. (a) A tool or switch held in the operator's hand or supported against his... particular voltage(s) are provided in the design and construction of the equipment, its wiring,...

  8. Flat panel display - Impurity doping technology for flat panel displays

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Toshiharu [Advanced Technology Planning, Sumitomo Eaton Nova Corporation, SBS Tower 9F, 10-1, Yoga 4-chome, Setagaya-ku, 158-0097 Tokyo (Japan)]. E-mail: suzuki_tsh@senova.co.jp

    2005-08-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified.

  9. Cavity Voltage Phase Modulation MD

    CERN Document Server

    Mastoridis, Themistoklis; Molendijk, John; Timko, Helga; CERN. Geneva. ATS Department

    2016-01-01

    The LHC RF/LLRF system is currently configured for extremely stable RF voltage to minimize transient beam loading effects. The present scheme cannot be extended beyond nominal beam current since the demanded power would exceed the peak klystron power and lead to saturation. A new scheme has therefore been proposed: for beam currents above nominal (and possibly earlier), the cavity phase modulation by the beam will not be corrected (transient beam loading), but the strong RF feedback and One-Turn Delay feedback will still be active for loop and beam stability in physics. To achieve this, the voltage set point will be adapted for each bunch. The goal of this MD was to test a new algorithm that would adjust the voltage set point to achieve the cavity phase modulation that would minimize klystron forward power.

  10. Portable High Voltage Impulse Generator

    Directory of Open Access Journals (Sweden)

    S. Gómez

    2011-07-01

    Full Text Available This paper presents a portable high voltage impulse generator which was designed and built with insulation up to 20 kV. This design was based on previous work in which simulation software for standard waves was developed. Commercial components and low-cost components were used in this work; however, these particular elements are not generally used for high voltage applications. The impulse generators used in industry and laboratories are usually expensive; they are built to withstand extra high voltage and they are big, making them impossible to transport. The proposed generator is portable, thereby allowing tests to be made on devices that cannot be moved from their location. The results obtained with the proposed impulse generator were satisfactory in terms of time and waveforms compared to other commercial impulse generators and the standard impulse wave simulator.

  11. Process engineering of high voltage alginate encapsulation of mesenchymal stem cells

    Energy Technology Data Exchange (ETDEWEB)

    Gryshkov, Oleksandr, E-mail: gryshkov@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Pogozhykh, Denys, E-mail: pogozhykh@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Zernetsch, Holger, E-mail: zernetsch@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Hofmann, Nicola, E-mail: hofmann@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Mueller, Thomas, E-mail: mueller.thomas@mh-hannover.de [Institute for Transfusion Medicine, Medical School Hannover, D-30625 Hannover (Germany); Glasmacher, Birgit, E-mail: glasmacher@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany)

    2014-03-01

    Encapsulation of stem cells in alginate beads is promising as a sophisticated drug delivery system in treatment of a wide range of acute and chronic diseases. However, common use of air flow encapsulation of cells in alginate beads fails to produce beads with narrow size distribution, intact spherical structure and controllable sizes that can be scaled up. Here we show that high voltage encapsulation (≥ 15 kV) can be used to reproducibly generate spherical alginate beads (200–400 μm) with narrow size distribution (± 5–7%) in a controlled manner under optimized process parameters. Flow rate of alginate solution ranged from 0.5 to 10 ml/h allowed producing alginate beads with a size of 320 and 350 μm respectively, suggesting that this approach can be scaled up. Moreover, we found that applied voltages (15–25 kV) did not alter the viability and proliferation of encapsulated mesenchymal stem cells post-encapsulation and cryopreservation as compared to air flow. We are the first who employed a comparative analysis of electro-spraying and air flow encapsulation to study the effect of high voltage on alginate encapsulated cells. This report provides background in application of high voltage to encapsulate living cells for further medical purposes. Long-term comparison and work on alginate–cell interaction within these structures will be forthcoming. - Highlights: • High voltage alginate encapsulation of mesenchymal stem cells (MSCs) was designed. • Reproducible and spherical alginate beads were generated via high voltage. • Air flow encapsulation was utilized as a comparative approach to high voltage. • High voltage did not alter the viability and proliferation of encapsulated MSCs. • High voltage encapsulation can be scaled up and applied in cell-based therapy.

  12. A low voltage CMOS low drop-out voltage regulator

    Science.gov (United States)

    Bakr, Salma Ali; Abbasi, Tanvir Ahmad; Abbasi, Mohammas Suhaib; Aldessouky, Mohamed Samir; Abbasi, Mohammad Usaid

    2009-05-01

    A low voltage implementation of a CMOS Low Drop-Out voltage regulator (LDO) is presented. The requirement of low voltage devices is crucial for portable devices that require extensive computations in a low power environment. The LDO is implemented in 90nm generic CMOS technology. It generates a fixed 0.8V from a 2.5V supply which on discharging goes to 1V. The buffer stage used is unity gain configured unbuffered OpAmp with rail-to-rail swing input stage. The simulation result shows that the implemented circuit provides load regulation of 0.004%/mA and line regulation of -11.09mV/V. The LDO provides full load transient response with a settling time of 5.2μs. Further, the dropout voltage is 200mV and the quiescent current through the pass transistor (Iload=0) is 20μA. The total power consumption of this LDO (excluding bandgap reference) is only 80μW.

  13. Implementation of Dynamic Voltage Restorer for Mitigation of Voltage Sag

    Directory of Open Access Journals (Sweden)

    K.Vinod Kumar

    2013-07-01

    Full Text Available Power quality is one of major concerns in the present. It has become important, especially with the introduction of sophisticated devices, whose performance is very sensitive to the quality of power supply. The dynamic voltage restorer (DVR is one of the modern devices used in distribution systems to improve the power quality. In this paper, emergency control in distribution systems is discussed by using the proposed multifunctional DVR control strategy.Also, themultiloop controller using the Posicast and P+Resonant controllers is proposed in order to improve the transient response and eliminate the steady state error in DVR response,respectively.The proposed process is applied to some riots in load voltage effected by induction motors starting, and a three-phase short circuit fault. The three-phase short circuits, and the large induction motors are suddenly started then voltage sags areoccurred.The innovation here is that by using the Multifunctional Dynamic Voltage Restorer, improve the power quality in distribution side. Simulation results show the capability of the DVR to control the emergency conditions of the distribution systems by using MATLAB/Simulink software.

  14. The high voltage homopolar generator

    Science.gov (United States)

    Price, J. H.; Gully, J. H.; Driga, M. D.

    1986-11-01

    System and component design features of proposed high voltage homopolar generator (HVHPG) are described. The system is to have an open circuit voltage of 500 V, a peak output current of 500 kA, 3.25 MJ of stored inertial energy and possess an average magnetic-flux density of 5 T. Stator assembly components are discussed, including the stator, mount structure, hydrostatic bearings, main and motoring brushgears and rotor. Planned operational procedures such as monitoring the rotor to full speed and operation with a superconducting field coil are delineated.

  15. On the Inclusion Relation of Reproducing Kernel Hilbert Spaces

    OpenAIRE

    Zhang, Haizhang; Zhao, Liang

    2011-01-01

    To help understand various reproducing kernels used in applied sciences, we investigate the inclusion relation of two reproducing kernel Hilbert spaces. Characterizations in terms of feature maps of the corresponding reproducing kernels are established. A full table of inclusion relations among widely-used translation invariant kernels is given. Concrete examples for Hilbert-Schmidt kernels are presented as well. We also discuss the preservation of such a relation under various operations of ...

  16. ReproPhylo: An Environment for Reproducible Phylogenomics

    OpenAIRE

    2015-01-01

    The reproducibility of experiments is key to the scientific process, and particularly necessary for accurate reporting of analyses in data-rich fields such as phylogenomics. We present ReproPhylo, a phylogenomic analysis environment developed to ensure experimental reproducibility, to facilitate the handling of large-scale data, and to assist methodological experimentation. Reproducibility, and instantaneous repeatability, is built in to the ReproPhylo system and does not require user interve...

  17. Resilient architecture design for voltage variation

    CERN Document Server

    Reddi, Vijay Janapa

    2013-01-01

    Shrinking feature size and diminishing supply voltage are making circuits sensitive to supply voltage fluctuations within the microprocessor, caused by normal workload activity changes. If left unattended, voltage fluctuations can lead to timing violations or even transistor lifetime issues that degrade processor robustness. Mechanisms that learn to tolerate, avoid, and eliminate voltage fluctuations based on program and microarchitectural events can help steer the processor clear of danger, thus enabling tighter voltage margins that improve performance or lower power consumption. We describe

  18. Participant Nonnaiveté and the reproducibility of cognitive psychology.

    Science.gov (United States)

    Zwaan, Rolf A; Pecher, Diane; Paolacci, Gabriele; Bouwmeester, Samantha; Verkoeijen, Peter; Dijkstra, Katinka; Zeelenberg, René

    2017-07-25

    Many argue that there is a reproducibility crisis in psychology. We investigated nine well-known effects from the cognitive psychology literature-three each from the domains of perception/action, memory, and language, respectively-and found that they are highly reproducible. Not only can they be reproduced in online environments, but they also can be reproduced with nonnaïve participants with no reduction of effect size. Apparently, some cognitive tasks are so constraining that they encapsulate behavior from external influences, such as testing situation and prior recent experience with the experiment to yield highly robust effects.

  19. Virtual Reference Environments: a simple way to make research reproducible.

    Science.gov (United States)

    Hurley, Daniel G; Budden, David M; Crampin, Edmund J

    2015-09-01

    'Reproducible research' has received increasing attention over the past few years as bioinformatics and computational biology methodologies become more complex. Although reproducible research is progressing in several valuable ways, we suggest that recent increases in internet bandwidth and disk space, along with the availability of open-source and free-software licences for tools, enable another simple step to make research reproducible. In this article, we urge the creation of minimal virtual reference environments implementing all the tools necessary to reproduce a result, as a standard part of publication. We address potential problems with this approach, and show an example environment from our own work.

  20. Tone compatibility between HDR displays

    Science.gov (United States)

    Bist, Cambodge; Cozot, Rémi; Madec, Gérard; Ducloux, Xavier

    2016-09-01

    High Dynamic Range (HDR) is the latest trend in television technology and we expect an in ux of HDR capable consumer TVs in the market. Initial HDR consumer displays will operate on a peak brightness of about 500-1000 nits while in the coming years display peak brightness is expected to go beyond 1000 nits. However, professionally graded HDR content can range from 1000 to 4000 nits. As with Standard Dynamic Range (SDR) content, we can expect HDR content to be available in variety of lighting styles such as low key, medium key and high key video. This raises concerns over tone-compatibility between HDR displays especially when adapting to various lighting styles. It is expected that dynamic range adaptation between HDR displays uses similar techniques as found with tone mapping and tone expansion operators. In this paper, we survey simple tone mapping methods of 4000 nits color-graded HDR content for 1000 nits HDR displays. We also investigate tone expansion strategies when HDR content graded in 1000 nits is displayed on 4000 nits HDR monitors. We conclude that the best tone reproduction technique between HDR displays strongly depends on the lighting style of the content.

  1. An AMOLED AC-Biased Pixel Design Compensating the Threshold Voltage and I-R Drop

    Directory of Open Access Journals (Sweden)

    Ching-Lin Fan

    2011-01-01

    Full Text Available We propose a novel pixel design and an AC bias driving method for active-matrix organic light-emitting diode (AM-OLED displays using low-temperature polycrystalline silicon thin-film transistors (LTPS-TFTs. The proposed threshold voltage and I-R drop compensation circuit, which comprised three transistors and one capacitor, have been verified to supply uniform output current by simulation work using the Automatic Integrated Circuit Modeling Simulation Program with Integrated Circuit Emphasis (AIM-SPICE simulator. The simulated results demonstrate excellent properties such as low error rate of OLED anode voltage variation (<0.7% and low voltage drop of VDD power line. The proposed pixel circuit effectively enables threshold-voltage-deviation correction of driving TFT and compensates for the voltage drop of VDD power line using AC bias on OLED cathode.

  2. VOLTAGE REGULATORS OF SYNCHRONOUS GENERATORS

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2015-06-01

    Full Text Available Synchronous generators are the primary source of electrical power autonomous electrosupply systems, including backup systems. They are also used in a structure of rotating electricity converters and are widely used in renewable energy as part of wind power plants of small, mini and micro hydroelectric plants. Increasing the speed and the accuracy of the system of the voltage regulation of synchronous generators is possible due to the development of combined systems containing more stabilizers. The article illustrates the functional schemes of circuit voltage stabilizers and frequency synchronous generators (with electromagnetic excitation and permanent magnet excitation and describes the features of their work, including two and three-aggregate rotating converters of electricity used in uninterruptible power supply systems. To improve the technical characteristics of the system of stabilization we have proposed functional solutions for stabilizers of synchronous generators made on the base of direct frequency converters and using a transformer with a rotating magnetic field. To improve the reliability of and to improve the operational characteristics of the autonomous independent sources of electricity we suggest creating the main functional blocks and the elements of the stabilization system in a modular way. The functional circuit solutions of voltage regulators of synchronous generators and the characteristics of their work considered in the article, are able to improve the efficiency of pre-design work in the development of new technical solutions for stabilizing the voltage and the frequency in synchronous generators of electrosupply autonomous systems

  3. Frequency-controlled voltage regulator

    Science.gov (United States)

    Mclyman, W. T.

    1980-01-01

    Converting input ac to higher frequency reduce size and weight and makes possible unique kind of regulation. Since conversion frequency is above range of human hearing, supply generated on audible noise. It also exploits highfrequency conversion features to regulate its output voltage in novel way. Circuit is inherently short-circuit proof.

  4. Ten inch Planar Optic Display

    Energy Technology Data Exchange (ETDEWEB)

    Beiser, L. [Beiser (Leo) Inc., Flushing, NY (United States); Veligdan, J. [Brookhaven National Lab., Upton, NY (United States)

    1996-04-01

    A Planar Optic Display (POD) is being built and tested for suitability as a high brightness replacement for the cathode ray tube, (CRT). The POD display technology utilizes a laminated optical waveguide structure which allows a projection type of display to be constructed in a thin (I to 2 inch) housing. Inherent in the optical waveguide is a black cladding matrix which gives the display a black appearance leading to very high contrast. A Digital Micromirror Device, (DMD) from Texas Instruments is used to create video images in conjunction with a 100 milliwatt green solid state laser. An anamorphic optical system is used to inject light into the POD to form a stigmatic image. In addition to the design of the POD screen, we discuss: image formation, image projection, and optical design constraints.

  5. ENERGY STAR Certified Displays - Deprecated

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset is up-to-date but newer better data can be retrieved at: https://data.energystar.gov/dataset/ENERGY-STAR-Certified-Displays/xsyb-v8gs Certified models...

  6. Color speckle in laser displays

    Science.gov (United States)

    Kuroda, Kazuo

    2015-07-01

    At the beginning of this century, lighting technology has been shifted from discharge lamps, fluorescent lamps and electric bulbs to solid-state lighting. Current solid-state lighting is based on the light emitting diodes (LED) technology, but the laser lighting technology is developing rapidly, such as, laser cinema projectors, laser TVs, laser head-up displays, laser head mounted displays, and laser headlamps for motor vehicles. One of the main issues of laser displays is the reduction of speckle noise1). For the monochromatic laser light, speckle is random interference pattern on the image plane (retina for human observer). For laser displays, RGB (red-green-blue) lasers form speckle patterns independently, which results in random distribution of chromaticity, called color speckle2).

  7. Ultraminiature, Micropower Multipurpose Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High information content electronic displays remain the most difficult element of the human-machine interface to effectively miniaturize. Mobile applications need a...

  8. Voltage-gated Proton Channels

    Science.gov (United States)

    DeCoursey, Thomas E.

    2014-01-01

    Voltage-gated proton channels, HV1, have vaulted from the realm of the esoteric into the forefront of a central question facing ion channel biophysicists, namely the mechanism by which voltage-dependent gating occurs. This transformation is the result of several factors. Identification of the gene in 2006 revealed that proton channels are homologues of the voltage-sensing domain of most other voltage-gated ion channels. Unique, or at least eccentric, properties of proton channels include dimeric architecture with dual conduction pathways, perfect proton selectivity, a single-channel conductance ~103 smaller than most ion channels, voltage-dependent gating that is strongly modulated by the pH gradient, ΔpH, and potent inhibition by Zn2+ (in many species) but an absence of other potent inhibitors. The recent identification of HV1 in three unicellular marine plankton species has dramatically expanded the phylogenetic family tree. Interest in proton channels in their own right has increased as important physiological roles have been identified in many cells. Proton channels trigger the bioluminescent flash of dinoflagellates, facilitate calcification by coccolithophores, regulate pH-dependent processes in eggs and sperm during fertilization, secrete acid to control the pH of airway fluids, facilitate histamine secretion by basophils, and play a signaling role in facilitating B-cell receptor mediated responses in B lymphocytes. The most elaborate and best-established functions occur in phagocytes, where proton channels optimize the activity of NADPH oxidase, an important producer of reactive oxygen species. Proton efflux mediated by HV1 balances the charge translocated across the membrane by electrons through NADPH oxidase, minimizes changes in cytoplasmic and phagosomal pH, limits osmotic swelling of the phagosome, and provides substrate H+ for the production of H2O2 and HOCl, reactive oxygen species crucial to killing pathogens. PMID:23798303

  9. Effective color design for displays

    Science.gov (United States)

    MacDonald, Lindsay W.

    2002-06-01

    Visual communication is a key aspect of human-computer interaction, which contributes to the satisfaction of user and application needs. For effective design of presentations on computer displays, color should be used in conjunction with the other visual variables. The general needs of graphic user interfaces are discussed, followed by five specific tasks with differing criteria for display color specification - advertising, text, information, visualization and imaging.

  10. 46 CFR 56.30-3 - Piping joints (reproduces 110).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping joints (reproduces 110). 56.30-3 Section 56.30-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Selection and Limitations of Piping Joints § 56.30-3 Piping joints (reproduces 110). The type...

  11. Reproducibility along a 10 cm vertical visual analogue scale.

    OpenAIRE

    Dixon, J. S.; Bird, H A

    1981-01-01

    Reproducibility along a vertical 10 cm visual analogue scale (VAS) was investigated. Eight normal volunteers attempted to duplicate a set of marked VAS. There was a tendency to estimate too high on the scale, and reproducibility was found to be variable along its length. This indicates that the error involved in the use of VASs is even more complex than previously thought.

  12. Completely reproducible description of digital sound data with cellular automata

    Energy Technology Data Exchange (ETDEWEB)

    Wada, Masato; Kuroiwa, Jousuke; Nara, Shigetoshi

    2002-12-30

    A novel method of compressive and completely reproducible description of digital sound data by means of rule dynamics of CA (cellular automata) is proposed. The digital data of spoken words and music recorded with the standard format of a compact disk are reproduced completely by this method with use of only two rules in a one-dimensional CA without loss of information.

  13. Development of Reproducing Alumina-Magnesia-Carbon Bricks

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The reproducing alumina-magnesia-carbon bricks were prepared with the dumped bricks as starting materials. The bulk density, apparent porosity, crushing strength, modolus of rupture and slag resistance of the specimen were analyzed. The results show that the used refractories can be reused and recycled by the right method. The reproducing alumina-magnesia-carbon bricks with better abilities were prepared.

  14. Multimeric nature of voltage-gated proton channels.

    Science.gov (United States)

    Koch, Hans P; Kurokawa, Tatsuki; Okochi, Yoshifumi; Sasaki, Mari; Okamura, Yasushi; Larsson, H Peter

    2008-07-01

    Voltage-gated potassium channels are comprised of four subunits, and each subunit has a pore domain and a voltage-sensing domain (VSD). The four pore domains assemble to form one single central pore, and the four individual VSDs control the gate of the pore. Recently, a family of voltage-gated proton channels, such as H(V) or voltage sensor only protein (VSOP), was discovered that contain a single VSD but no pore domain. It has been assumed that VSOP channels are monomeric and contain a single VSD that functions as both the VSD and the pore domain. It remains unclear, however, how a protein that contains only a VSD and no pore domain can conduct ions. Using fluorescence measurements and immunoprecipitation techniques, we show here that VSOP channels are expressed as multimeric channels. Further, FRET experiments on constructs with covalently linked subunits show that VSOP channels are dimers. Truncation of the cytoplasmic regions of VSOP reduced the dimerization, suggesting that the dimerization is caused mainly by cytoplasmic protein-protein interactions. However, these N terminus- and C terminus-deleted channels displayed large proton currents. Therefore, we conclude that even though VSOP channels are expressed mainly as dimers in the cell membrane, single VSOP subunits could function independently as proton channels.

  15. VFT PHASE VOLTAGE MEASUREMENT IN THREE-PHASE ENCLOSED GIS

    Institute of Scientific and Technical Information of China (English)

    邹建华; 岳子丁; 李洋

    2002-01-01

    The measuring of VFT phase voltage in three-phase enclosed GIS is more complex and difficult than in single-phase ones. There are 3 capacitive sensors in the measuring system, the outputs of which are with a linear relation to the three phase voltages. This linear relation is presented with a factorial matrix. Because each capacitive sensor is coupled with the electric field of three phases (A, B, and C), the electric coupling coefficients are introduced. In order to determine the matrix of electric coupling coefficients, the numerical calculation method can be used. From the discussion on two types of three-phase enclosed GIS bus, i.e. standard arrangement and biased arrangement, the dominant electric coupling coefficients are named, which can be simply and approximately calculated by an analytic expression. Finally, as an example, the waveforms of VFT phase voltage generated on a three-phase enclosed GIS bus model are displayed. When a capacitive sensor is located at the 'shortest point' of phase A (or B, or C), the VFT phase voltage VA (or VB, or VC) can almost be measured by that capacitive sensor alone.

  16. Over-voltage protection system and method

    Energy Technology Data Exchange (ETDEWEB)

    Chi, Song; Dong, Dong; Lai, Rixin

    2017-05-02

    An over-voltage protection system includes an electronic valve connected across two terminals of a circuit and an over-voltage detection circuit connected across one of the plurality of semiconductor devices for detecting an over-voltage across the circuit. The electronic valve includes a plurality of semiconductor devices connected in series. The over-voltage detection circuit includes a voltage divider circuit connected to a break-over diode in a way to provide a representative low voltage to the break-over diode and an optocoupler configured to receive a current from the break-over diode when the representative low voltage exceeds a threshold voltage of the break-over diode indicating an over-voltage condition. The representative low voltage provided to the break-over diode represents a voltage across the one semiconductor device. A plurality of self-powered gate drive circuits are connected to the plurality of semiconductor devices, wherein the plurality of self-powered gate drive circuits receive over-voltage triggering pulses from the optocoupler during the over-voltage condition and switch on the plurality of semiconductor devices to bypass the circuit.

  17. The VLT Real Time Display

    Science.gov (United States)

    Herlin, T.; Brighton, A.; Biereichel, P.

    The VLT Real-Time Display (RTD) software was developed in order to support image display in real-time, providing a tool for users to display video like images from a camera or detector as fast as possible on an X-Server. The RTD software is implemented as a package providing a Tcl/Tk image widget written in C++ and an independent image handling library and can be used as a building block, adding display capabilities to dedicated VLT control applications. The RTD widget provides basic image display functionality like: panning, zooming, color scaling, colormaps, intensity changes, pixel query, overlaying of line graphics. A large set of assisting widgets, e.g., colorbar, zoom window, spectrum plot are provided to enable the building of image applications. The support for real-time is provided by an RTD image event mechanism used for camera or detector subsystems to pass images to the RTD widget. Image data are passed efficiently via shared memory. This paper describes the architecture of the RTD software and summarizes the features provided by RTD.

  18. Phosphors for flat panel emissive displays

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, M.T.; Walko, R.J.; Phillips, M.L.F.

    1995-07-01

    An overview of emissive display technologies is presented. Display types briefly described include: cathode ray tubes (CRTs), field emission displays (FEDs), electroluminescent displays (ELDs), and plasma display panels (PDPs). The critical role of phosphors in further development of the latter three flat panel emissive display technologies is outlined. The need for stable, efficient red, green, and blue phosphors for RGB fall color displays is emphasized.

  19. Advances in high voltage engineering

    CERN Document Server

    Haddad, A

    2005-01-01

    This book addresses the very latest research and development issues in high voltage technology and is intended as a reference source for researchers and students in the field, specifically covering developments throughout the past decade. This unique blend of expert authors and comprehensive subject coverage means that this book is ideally suited as a reference source for engineers and academics in the field for years to come.

  20. High Voltage Pulse Testing Survey.

    Science.gov (United States)

    1985-10-01

    Cryogenic 23 E. Liquids 26 F. Solids 28 1. Polyethylene 28 2. Cross-Linked Polyethylene ( XLPE ) 29 3. Polyimide and Polyvenylchloride (PVC) 31 VI Benefits 35 A...Strength of XLPE Cables 29 vii * 4" I PROGRAM OBJECTIVES The Pulse Test Survey summarizes government, industry, and technical reports on high voltage pulse...system of silicone oil on a XLPE (cross-linked polyethylene) spacer tends to lower the impulse breakdown by approximately 10 percent. The negative impulse

  1. TRANSISTOR HIGH VOLTAGE POWER SUPPLY

    Science.gov (United States)

    Driver, G.E.

    1958-07-15

    High voltage, direct current power supplies are described for use with battery powered nuclear detection equipment. The particular advantages of the power supply described, are increased efficiency and reduced size and welght brought about by the use of transistors in the circuit. An important feature resides tn the employment of a pair of transistors in an alternatefiring oscillator circuit having a coupling transformer and other circuit components which are used for interconnecting the various electrodes of the transistors.

  2. Low voltage electron beam accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Ochi, Masafumi [Iwasaki Electric Co., Ltd., Tokyo (Japan)

    2003-02-01

    Widely used electron accelerators in industries are the electron beams with acceleration voltage at 300 kV or less. The typical examples are shown on manufactures in Japan, equipment configuration, operation, determination of process parameters, and basic maintenance requirement of the electron beam processors. New electron beam processors with acceleration voltage around 100 kV were introduced maintaining the relatively high dose speed capability of around 10,000 kGy x mpm at production by ESI (Energy Science Inc. USA, Iwasaki Electric Group). The application field like printing and coating for packaging requires treating thickness of 30 micron or less. It does not require high voltage over 110 kV. Also recently developed is a miniature bulb type electron beam tube with energy less than 60 kV. The new application area for this new electron beam tube is being searched. The drive force of this technology to spread in the industries would be further development of new application, process and market as well as the price reduction of the equipment, upon which further acknowledgement and acceptance of the technology to societies and industries would entirely depend. (Y. Tanaka)

  3. Selection of the Optimum Electrospray Voltage for Gradient Elution LC-MS Measurements

    Science.gov (United States)

    Marginean, Ioan; Kelly, Ryan T.; Moore, Ronald J.; Prior, David C.; LaMarche, Brian L.; Tang, Keqi; Smith, Richard D.

    2009-01-01

    Changes in liquid composition during gradient elution liquid chromatography (LC) coupled to mass spectrometry (MS) analyses affect the electrospray operation. To establish methodologies for judicious selection of the electrospray voltage, we monitored in real-time the effect of the LC gradient on the spray current. The optimum range of the electrospray voltage decreased as the concentration of organic solvent in the eluent increased during reversed-phase LC analyses. These results provided the means to rationally select the voltage so as to ensure effective electrospray operation throughout gradient-elution LC separations. For analyses in which the electrospray was operated at constant voltage, a small run-to-run variation in the spray current was observed, indicating a changing electric field due to fouling or degradation of the emitter. Algorithms using feedback from spray current measurements to maintain the electrospray voltage within the optimum operating range throughout gradient elution LC-MS were evaluated. The electrospray operation with voltage regulation and at a constant, judiciously selected voltage during gradient elution LC-MS measurements produced data with similar reproducibility. SYNOPSIS Electrospray current measurements during gradient elution liquid chromatography analyses provide reliable feedback for monitoring, understanding, and improving performance. PMID:19196520

  4. Selection of the Optimum Electrospray Voltage for Gradient Elution LC-MS Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Marginean, Ioan; Kelly, Ryan T.; Moore, Ronald J.; Prior, David C.; Lamarche, Brian L.; Tang, Keqi; Smith, Richard D.

    2009-04-01

    Changes in liquid composition during gradient elution liquid chromatography (LC) and mass spectrometry (MS) analyses affect the electrospray operation. To establish methodologies for judicious selection of the electrospray voltage, we monitored in real-time the effect of the LC gradient on the spray current. The optimum range of the electrospray voltage shifted to lower values as the concentration of organic solvent in the eluent increased during reversed-phase LC analyses. These results provided the means to rationally select the voltage that ensured successful electrospray operation throughout gradient elution LC-MS experiments. A small run-to-run drift in the spray current was observed for electrosprays operated at constant voltage. This could be the result of fouling or degradation of the electrospray emitter, which affected the electric field driving the electrospray. Algorithms using feedback from spray current measurements to maintain the electrospray voltage within the optimum operating range throughout gradient elution LC-MS were evaluated. The electrospray operation with voltage regulation and at constant, judiciously selected voltage during gradient elution LC-MS measurements produced data with similar reproducibility.

  5. Non-reproducible Electrical Properties Of Semiconductor PVDF-HFP (Hexafluoropropylenevinylidenefluoride) Copolymer

    Science.gov (United States)

    Likoglu, Gulbeden; Guney, H. Yuksel; Abaci, Ufuk

    2007-04-01

    The I-V characteristic of carbon black-filled PVDF-HFP copolymer has been investigated as functions of electrical field, temperature and time. In addition, the conductivity has been measured by applying fixed voltage at different temperature. Electrical properties of the carbon-black-filled PVDf-HFP have been compared with the electrical properties of pure PVDF and PVDF-HFP samples. The variation of conductivity with respect to electrical field and temperature has been obtained experimentally. Although the conductivity has been especially increasing with using temperature as semiconductor, it tends to decrease after a certain electrical field. Because of the dipolar structure, the I-V characteristic of the material has shown non-reproducible and hysteresis behavior. It has observed that the variation of conductivity as a function of temperature under fixed electrical field followed different exponential ways which depends on time after a certain temperature value.

  6. BES Monitoring & Displaying System

    Institute of Scientific and Technical Information of China (English)

    MengWANG; BingyunZHANG; 等

    2001-01-01

    BES1 Monitoring & Displaying System(BESMDS)is projected to monitor and display the running status of DAQ and Slow Control systems of BES through the Web for worldwide accessing.It provides a real-time remote means of monitoring as well as an approach to study the environmental influence upon physical data taking.The system collects real-time data separately from BES online subsystems by network sockets and stores the data into a database.People can access the system through its web site.which retrieves data on request from the database and can display results in dynamically created images.Its web address in http:// besmds,ihep.ac.cn/

  7. Engineering antibodies by yeast display.

    Science.gov (United States)

    Boder, Eric T; Raeeszadeh-Sarmazdeh, Maryam; Price, J Vincent

    2012-10-15

    Since its first application to antibody engineering 15 years ago, yeast display technology has been developed into a highly potent tool for both affinity maturing lead molecules and isolating novel antibodies and antibody-like species. Robust approaches to the creation of diversity, construction of yeast libraries, and library screening or selection have been elaborated, improving the quality of engineered molecules and certainty of success in an antibody engineering campaign and positioning yeast display as one of the premier antibody engineering technologies currently in use. Here, we summarize the history of antibody engineering by yeast surface display, approaches used in its application, and a number of examples highlighting the utility of this method for antibody engineering.

  8. PROGRAMMABLE DISPLAY PUSHBUTTON LEGEND EDITOR

    Science.gov (United States)

    Busquets, A. M.

    1994-01-01

    The Programmable Display Pushbutton (PDP) is a pushbutton device available from Micro Switch which has a programmable 16 x 35 matrix of LEDs on the pushbutton surface. Any desired legends can be displayed on the PDPs, producing user-friendly applications which greatly reduce the need for dedicated manual controls. Because the PDP can interact with the operator, it can call for the correct response before transmitting its next message. It is both a simple manual control and a sophisticated programmable link between the operator and the host system. The Programmable Display Pushbutton Legend Editor, PDPE, is used to create the LED displays for the pushbuttons. PDPE encodes PDP control commands and legend data into message byte strings sent to a Logic Refresh and Control Unit (LRCU). The LRCU serves as the driver for a set of four PDPs. The legend editor (PDPE) transmits to the LRCU user specified commands that control what is displayed on the LED face of the individual pushbuttons. Upon receiving a command, the LRCU transmits an acknowledgement that the message was received and executed successfully. The user then observes the effect of the command on the PDP displays and decides whether or not to send the byte code of the message to a data file so that it may be called by an applications program. The PDPE program is written in FORTRAN for interactive execution. It was developed on a DEC VAX 11/780 under VMS. It has a central memory requirement of approximately 12800 bytes. It requires four Micro Switch PDPs and two RS-232 VAX 11/780 terminal ports. The PDPE program was developed in 1985.

  9. Effect of Wall Charge on Striation in Plasma Display Cells

    Institute of Scientific and Technical Information of China (English)

    HE Feng; OUYANG Jiting; CAO Jing; FENG Shuo; MIAO Jinsong; WANG Jianqi

    2007-01-01

    Different configurations and driving voltages have been employed to investigate the effect of the wall charge on the striations in macroscopic plasma display panel (PDP) cells.The experimental results show that a discharge channel near the dielectric layer is indispensable to striation occurring in the anode area during a discharge,while the pre-accumulated charge on the dielectric layer and the surface state are not important.The origin of the striation is related only to the physical process in the cell.The dielectric layer acts as a charge collector during a PDP discharge.

  10. A faster switching regime for zenithal bistable nematic displays

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, J

    1997-12-01

    A simpler and faster switching regime for Zenithal Bistable Nematic displays is reported. A cell, based on homeotropic alignment of nematic liquid crystal over a continuous blazed monograting on one surface, can be switched using bipolar pulses an order of magnitude faster than monopolar pulses of the same voltage. We propose that this regime relies on simple dielectric coupling to drive the cell into a higher energy state with a long pulse time, and the relaxation into a lower energy state after the creation of surface defects from a shorter applied pulse. Although flexoelectric effects are observed, they do not form the basis of state selection as was proposed for the monopolar pulses

  11. Piezo Voltage Controlled Planar Hall Effect Devices

    OpenAIRE

    Bao Zhang; Kang-Kang Meng; Mei-Yin Yang; Edmonds, K. W.; Hao Zhang; Kai-Ming Cai; Yu Sheng; Nan Zhang; Yang Ji; Jian-Hua Zhao; Hou-Zhi Zheng; Kai-You Wang

    2015-01-01

    The electrical control of the magnetization switching in ferromagnets is highly desired for future spintronic applications. Here we report on hybrid piezoelectric (PZT)/ferromagnetic (Co2FeAl) devices in which the planar Hall voltage in the ferromagnetic layer is tuned solely by piezo voltages. The change of planar Hall voltage is associated with magnetization switching through 90° in the plane under piezo voltages. Room temperature magnetic NOT and NOR gates are demonstrated based on the pie...

  12. Computational multi-projection display.

    Science.gov (United States)

    Moon, Seokil; Park, Soon-Gi; Lee, Chang-Kun; Cho, Jaebum; Lee, Seungjae; Lee, Byoungho

    2016-04-18

    A computational multi-projection display is proposed by employing a multi-projection system combining with compressive light field displays. By modulating the intensity of light rays from a spatial light modulator inside a single projector, the proposed system can offer several compact views to observer. Since light rays are spread to all directions, the system can provide flexible positioning of viewpoints without stacking projectors in vertical direction. Also, if the system is constructed properly, it is possible to generate view images with inter-pupillary gap and satisfy the super multi-view condition. We explain the principle of the proposed system and verify its feasibility with simulations and experimental results.

  13. 49 CFR 234.221 - Lamp voltage.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Lamp voltage. 234.221 Section 234.221 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION..., Inspection, and Testing Maintenance Standards § 234.221 Lamp voltage. The voltage at each lamp shall...

  14. Bootstrapped Low-Voltage Analog Switches

    DEFF Research Database (Denmark)

    Steensgaard-Madsen, Jesper

    1999-01-01

    Novel low-voltage constant-impedance analog switch circuits are proposed. The switch element is a single MOSFET, and constant-impedance operation is obtained using simple circuits to adjust the gate and bulk voltages relative to the switched signal. Low-voltage (1-volt) operation is made feasible...

  15. Display standards for commercial flight decks

    Science.gov (United States)

    Lamberth, Larry S.; Penn, Cecil W.

    1994-06-01

    SAE display standards are used as guidelines for certifying commercial airborne electronic displays. The SAE document generation structure and approval process is described. The SAE committees that generate display standards are described. Three SAE documents covering flat panel displays (AS-8034, ARP-4256, and ARP-4260) are discussed with their current status. Head-Up Display documents are also in work.

  16. Flow reversal at low voltage and low frequency in a microfabricated ac electrokinetic pump

    DEFF Research Database (Denmark)

    Gregersen, Misha Marie; Olesen, Laurits Højgaard; Brask, Anders

    2007-01-01

    Microfluidic chips have been fabricated in Pyrex glass to study electrokinetic pumping generated by a low-voltage ac bias applied to an in-channel asymmetric metallic electrode array. A measurement procedure has been established and followed carefully resulting in a high degree of reproducibility...... of the measurements over several days. A large coverage fraction of the electrode array in the microfluidic channels has led to an increased sensitivity allowing for pumping measurements at low bias voltages. Depending on the ionic concentration a hitherto unobserved reversal of the pumping direction has been...

  17. Thermal Stress Analysis of Medium-Voltage Converters for Smart Transformers

    DEFF Research Database (Denmark)

    Andresen, Markus; Ma, Ke; De Carne, Giovanni

    2017-01-01

    . To address this concern, this work conducts thermal stress analysis for a modular multilevel converter (MMC), which is a promising solution for the medium voltage stage of the ST. The focus is put on the mission profiles of the transformer and the impact on the thermal stress of power semiconductor devices....... Normal operation at different power levels and medium voltage grid faults in a feeder fed by a traditional transformer are considered as well as the electrical and the thermal stress of the disconnection and the reconnection procedures. For the validation, the thermal stress of one MMC cell is reproduced...

  18. Reproducible in vitro regeneration system for purifying sugarcane ...

    African Journals Online (AJOL)

    Tansgenic Lab

    2012-05-24

    May 24, 2012 ... Full Length Research Paper. Reproducible in ... regeneration was varied from basal to top sections. Nevertheless ... 2005). The application of biotechnology to sugarcane is comparatively ..... Damon RA, Harvey WR (1987).

  19. Transition questions in clinical practice - validity and reproducibility

    DEFF Research Database (Denmark)

    Lauridsen, Henrik Hein

    2008-01-01

    of construct validity and reproducibility of a TQ and make proposals for standardised use. One-hundred-and-ninety-one patients with low back pain and/or leg pain were followed over an 8-week period receiving 3 disability and 2 pain questionnaires together with a 7-point TQ. Reproducibility was determined using...... are reproducible in patients with low back pain and/or leg pain. Despite critique of several biases, our results have reinforced the construct validity of TQ’s as an outcome measure since only 1 hypothesis was rejected. On the basis of our findings we have outlined a proposal for a standardised use of transition......Transition questions in CLINICAL practice - validity and reproducibility Lauridsen HH1, Manniche C3, Grunnet-Nilsson N1, Hartvigsen J1,2 1   Clinical Locomotion Science, Institute of Sports Science and Clinical Biomechanics, University of Southern Denmark, Odense, Denmark. e-mail: hlauridsen...

  20. Reproducibility of ERG responses obtained with the DTL electrode.

    Science.gov (United States)

    Hébert, M; Vaegan; Lachapelle, P

    1999-03-01

    Previous investigators have suggested that the DTL fibre electrode might not be suitable for the recording of replicable electroretinograms. We present experimental evidence that when used adequately, this electrode does permit the recording of highly reproducible retinal potentials.

  1. Preparation of Panel and Charged Particles for Electrophoretic Display

    Science.gov (United States)

    Choi, Hyung Suk; Park, Jin Woo; Park, Lee Soon; Lee, Jung Kyung; Han, Yoon Soo; Kwon, Younghwan

    Studies on the formulation of photosensitive paste for transparent soft mold press (TSMP) method have been performed. With the optimum formulation of the photosensitive paste the box-type barrier rib with good flexibility and high solvent resistance was fabricated, suitable for the panel material of the electrophoretic display. Cationically-charged white particles were prepared by using TiO2 nanoparticles, silane coupling agent with amino groups, dispersant and acetic acid. The cationically charged TiO2 particles exhibited 74.09 mV of zeta potential and 3.11 × 10-5 cm2/Vs of mobility. Electrophoretic display fabricated with the charged TiO2 particles exhibited 10 V of low driving voltage and maximum contrast ratio (5.3/1) at 30 V.

  2. Dose estimate by personal music players based on weighted output voltage

    DEFF Research Database (Denmark)

    Hammershøi, Dorte; Ordoñez Pizarro, Rodrigo Eduardo; Christensen, Anders Tornvig

    2015-01-01

    The exposure by personal music players may in future be displayed to users, as described in the current draft of EN 50332-3. The suggested procedure includes a weighting of the electrical output voltages of the music player, and does not include the significance of the earphone sensitivity. It does...

  3. Display Apple M7649Zm

    CERN Multimedia

    2001-01-01

    It was Designed for the Power Mac G4. This Apple studio display gives you edge-to-edge distortion-free images. With more than 16.7 million colors and 1,280 x 1,024 dpi resolution, you view brilliant and bright images on this Apple 17-inch monitor.

  4. Book Display as Adult Service.

    Science.gov (United States)

    Moore, Matthew S.

    1997-01-01

    Defines book display as an adult service as choosing and positioning adult books from the library collection to increase their circulation. The author contrasts bookstore arrangement for sales versus library arrangement for access, including contrasting missions, genre grouping, weeding, problems, and dimensions. (Author/LRW)

  5. Real Time Sonic Boom Display

    Science.gov (United States)

    Haering, Ed

    2014-01-01

    This presentation will provide general information about sonic boom mitigation technology to the public in order to supply information to potential partners and licensees. The technology is a combination of flight data, atmospheric data and terrain information implemented into a control room real time display for flight planning. This research is currently being performed and as such, any results and conclusions are ongoing.

  6. Graphics Display of Foreign Scripts.

    Science.gov (United States)

    Abercrombie, John R.

    1987-01-01

    Describes Graphics Project for Foreign Language Learning at the University of Pennsylvania, which has developed ways of displaying foreign scripts on microcomputers. Character design on computer screens is explained; software for graphics, printing, and language instruction is discussed; and a text editor is described that corrects optically…

  7. Verbal Modification via Visual Display

    Science.gov (United States)

    Richmond, Edmun B.; Wallace-Childers, La Donna

    1977-01-01

    The inability of foreign language students to produce acceptable approximations of new vowel sounds initiated a study to devise a real-time visual display system whereby the students could match vowel production to a visual pedagogical model. The system used amateur radio equipment and a standard oscilloscope. (CHK)

  8. Colour displays for categorical images

    NARCIS (Netherlands)

    Glasbey, C.; Heijden, van der G.W.A.M.; Toh, V.F.K.; Gray, A.J.

    2007-01-01

    We propose a method for identifying a set of colours for displaying 2D and 3D categorical images when the categories are unordered labels. The principle is to find maximally distinct sets of colours. We either generate colours sequentially, to maximize the dissimilarity or distance between a new col

  9. Autostereoscopic display with eye tracking

    Science.gov (United States)

    Tomono, Takao; Hoon, Kyung; Ha, Yong Soo; Kim, Sung-Sik; Son, Jung-Young

    2002-05-01

    Auto-stereoscopic 21-inch display with eye tracking having wide viewing zone and bright image was fabricated. The image of display is projected to retinal through several optical components. We calculated optical system for wider viewing zone by using Inverse-Ray Trace Method. The viewing zone of first model is 155mm (theoretical value: 161mm). We could widen viewing zone by controlling paraxial radius of curvature of spherical mirror, the distance between lenses and so on. The viewing zone of second model is 208mm. We used two spherical mirrors to obtain twice brightness. We applied eye-tracking system to the display system. Eye recognition is based on neural network card based on ZICS technology. We fabricated Auto-stereoscopic 21-inch display with eye tracking. We measured viewing zone based on illumination area. The viewing zone was 206mm, which was close to theoretical value. We could get twice brightness also. We could see 3D image according to position without headgear.

  10. Crystal ball single event display

    Energy Technology Data Exchange (ETDEWEB)

    Grosnick, D.; Gibson, A. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy; Allgower, C. [Argonne National Lab., IL (United States). High Energy Physics Div.; Alyea, J. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy]|[Argonne National Lab., IL (United States). High Energy Physics Div.

    1997-10-15

    The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about {pi}{sup o}`s and {eta}`s formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer.

  11. GridOrbit public display

    DEFF Research Database (Denmark)

    Ramos, Juan David Hincapie; Tabard, Aurélien; Bardram, Jakob

    2010-01-01

    We introduce GridOrbit, a public awareness display that visualizes the activity of a community grid used in a biology laboratory. This community grid executes bioin-formatics algorithms and relies on users to donate CPU cycles to the grid. The goal of GridOrbit is to create a shared awareness about...

  12. Information retrieval and display system

    Science.gov (United States)

    Groover, J. L.; King, W. L.

    1977-01-01

    Versatile command-driven data management system offers users, through simplified command language, a means of storing and searching data files, sorting data files into specified orders, performing simple or complex computations, effecting file updates, and printing or displaying output data. Commands are simple to use and flexible enough to meet most data management requirements.

  13. Making neurophysiological data analysis reproducible. Why and how?

    OpenAIRE

    Delescluse, Matthieu; Franconville, Romain; Joucla, Sébastien; Lieury, Tiffany; Pouzat, Christophe

    2011-01-01

    Manuscript submitted to "The Journal of Physiology (Paris)". Second version.; Reproducible data analysis is an approach aiming at complementing classical printed scientific articles with everything required to independently reproduce the results they present. ''Everything'' covers here: the data, the computer codes and a precise description of how the code was applied to the data. A brief history of this approach is presented first, starting with what economists have been calling replication ...

  14. Comment on "Estimating the reproducibility of psychological science".

    Science.gov (United States)

    Gilbert, Daniel T; King, Gary; Pettigrew, Stephen; Wilson, Timothy D

    2016-03-04

    A paper from the Open Science Collaboration (Research Articles, 28 August 2015, aac4716) attempting to replicate 100 published studies suggests that the reproducibility of psychological science is surprisingly low. We show that this article contains three statistical errors and provides no support for such a conclusion. Indeed, the data are consistent with the opposite conclusion, namely, that the reproducibility of psychological science is quite high.

  15. ON APPROXIMATION BY REPRODUCING KERNEL SPACES IN WEIGHTED Lp SPACES

    Institute of Scientific and Technical Information of China (English)

    Baohuai SHENG

    2007-01-01

    In this paper, we investigate the order of approximation by reproducing kernel spaces on (-1, 1) in weighted Lp spaces. We first restate the translation network from the view of reproducing kernel spaces and then construct a sequence of approximating operators with the help of Jacobi orthogonal polynomials, with which we establish a kind of Jackson inequality to describe the error estimate.Finally, The results are used to discuss an approximation problem arising from learning theory.

  16. On The Reproducibility of Seasonal Land-surface Climate

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, T J

    2004-10-22

    The sensitivity of the continental seasonal climate to initial conditions is estimated from an ensemble of decadal simulations of an atmospheric general circulation model with the same specifications of radiative forcings and monthly ocean boundary conditions, but with different initial states of atmosphere and land. As measures of the ''reproducibility'' of continental climate for different initial conditions, spatio-temporal correlations are computed across paired realizations of eleven model land-surface variables in which the seasonal cycle is either included or excluded--the former case being pertinent to climate simulation, and the latter to seasonal anomaly prediction. It is found that the land-surface variables which include the seasonal cycle are impacted only marginally by changes in initial conditions; moreover, their seasonal climatologies exhibit high spatial reproducibility. In contrast, the reproducibility of a seasonal land-surface anomaly is generally low, although it is substantially higher in the Tropics; its spatial reproducibility also markedly fluctuates in tandem with warm and cold phases of the El Nino/Southern Oscillation. However, the overall degree of reproducibility depends strongly on the particular land-surface anomaly considered. It is also shown that the predictability of a land-surface anomaly implied by its reproducibility statistics is consistent with what is inferred from more conventional predictability metrics. Implications of these results for climate model intercomparison projects and for operational forecasts of seasonal continental climate also are elaborated.

  17. Voltage Management in Unbalanced Low Voltage Networks Using a Decoupled Phase-Tap-Changer Transformer

    DEFF Research Database (Denmark)

    Coppo, Massimiliano; Turri, Roberto; Marinelli, Mattia

    2014-01-01

    The paper studies a medium voltage-low voltage transformer with a decoupled on load tap changer capability on each phase. The overall objective is the evaluation of the potential benefits on a low voltage network of such possibility. A realistic Danish low voltage network is used for the analysis...

  18. Estimating Voltage Asymmetry Making by One Phase Micro-generator in Low Voltage Network

    Directory of Open Access Journals (Sweden)

    Marian Sobierajski

    2014-12-01

    Full Text Available Connection of one phase micro-generator to the low voltage network increases voltage asymmetry. The voltage asymmetry is defined as the quotient of negative and positive voltage components. The mathematical background of exact and rough computation of the asymmetry quotient is presented in the paper. Considerations are illustrated by simple examples.

  19. 76 FR 70721 - Voltage Coordination on High Voltage Grids; Notice of Staff Workshop

    Science.gov (United States)

    2011-11-15

    ... Energy Regulatory Commission Voltage Coordination on High Voltage Grids; Notice of Staff Workshop Take notice that the Federal Energy Regulatory Commission will hold a Workshop on Voltage Coordination on High Voltage Grids on Thursday, December 1, 2011 from 9 a.m. to 4:30 p.m. This staff-led workshop will be...

  20. Two-dimensional model of an AC plasma display panel cell in a neon-xenon mixture

    Energy Technology Data Exchange (ETDEWEB)

    Boeuf, J.P.; Pitchford, L.C. [Universite Paul Sabatier, Toulouse (France)

    1995-12-31

    We present a 2-D fluid model of an AC plasma display panel cell. Plasma Display Panels (PDP) are flat display devices where the light of each picture element is emitted from a plasma created by an electric discharge. In the simplest electrode configuration, AC plasma display panels consist of two glass plates, each with parallel electrodes deposited on their surfaces. The electrodes are covered with a dielectric film above which a protective MgO layer is deposited. The plates are sealed together with their electrodes at right angles, and the cap between the plates is filled with a rare gas mixture. An electric discharge can be initiated in the gas cap by applying a voltage pulse between a line electrode and a column electrode. This discharge is transient due to the dielectric layers covering the electrode: the charges deposited on the dielectric surfaces induce in the gas cap a voltage which opposes the electrode voltage. Since the electrode voltage is AC (frequency in the 10-100 kHz range), a discharge is initiated each time the electrode voltage changes sign (the voltage across the dielectric layers adds to the electrode voltage when it changes sign). The {open_quotes}ON{close_quotes} state of a picture element is therefore a succession of transient discharges. In color displays, the UV light of the discharge is used to excite phosphors in the three fundamental colors (at least three discharge cells are used for one pixel of the screen). Neon-xenon or helium-xenon mixtures are generally used in color displays where photons emitted by excited atomic (147 nm) and molecular (150 nm and 173 nm) xenon are used to excite the phosphors.

  1. Display Sharing: An Alternative Paradigm

    Science.gov (United States)

    Brown, Michael A.

    2010-01-01

    The current Johnson Space Center (JSC) Mission Control Center (MCC) Video Transport System (VTS) provides flight controllers and management the ability to meld raw video from various sources with telemetry to improve situational awareness. However, maintaining a separate infrastructure for video delivery and integration of video content with data adds significant complexity and cost to the system. When considering alternative architectures for a VTS, the current system's ability to share specific computer displays in their entirety to other locations, such as large projector systems, flight control rooms, and back supporting rooms throughout the facilities and centers must be incorporated into any new architecture. Internet Protocol (IP)-based systems also support video delivery and integration. IP-based systems generally have an advantage in terms of cost and maintainability. Although IP-based systems are versatile, the task of sharing a computer display from one workstation to another can be time consuming for an end-user and inconvenient to administer at a system level. The objective of this paper is to present a prototype display sharing enterprise solution. Display sharing is a system which delivers image sharing across the LAN while simultaneously managing bandwidth, supporting encryption, enabling recovery and resynchronization following a loss of signal, and, minimizing latency. Additional critical elements will include image scaling support, multi -sharing, ease of initial integration and configuration, integration with desktop window managers, collaboration tools, host and recipient controls. This goal of this paper is to summarize the various elements of an IP-based display sharing system that can be used in today's control center environment.

  2. Investigation of the negative differential resistance reproducibility in AlN/GaN double-barrier resonant tunnelling diodes

    Energy Technology Data Exchange (ETDEWEB)

    Boucherit, M.; Soltani, A.; Rousseau, M.; Deresmes, D.; Berthe, M.; Durand, C.; De Jaeger, J.-C. [IEMN/UMR-CNRS 8520, Universite Lille1, PRES Universite Lille Nord de France (France); Monroy, E. [Equipe mixte CEA-CNRS-UJF Nanophysique et Semiconducteurs, DRFMC/SP2M/PSC, CEA-Grenoble (France)

    2011-10-31

    AlN/GaN double-barrier resonant tunnelling diodes were grown by molecular beam epitaxy on GaN/sapphire template and processed into mesa diameters from 2 {mu}m to 4 {mu}m. The current-voltage characteristics were carried out in direct current operation and under-high vacuum. A sharp negative differential resistance (NDR) was detected in the forward bias at 120 K. The NDR was observed for the mesa size of 2 {mu}m at 4 V with a peak-to-valley current ratio of 3.5. The measurement conditions were chosen to make NDR reproducible more than 50 times and apparent in both scan voltage directions after electrical treatment.

  3. Improving transition voltage spectroscopy of molecular junctions

    DEFF Research Database (Denmark)

    Markussen, Troels; Chen, Jingzhe; Thygesen, Kristian Sommer

    2011-01-01

    Transition voltage spectroscopy (TVS) is a promising spectroscopic tool for molecular junctions. The principles in TVS is to find the minimum on a Fowler-Nordheim plot where ln(I/V2) is plotted against 1/V and relate the voltage at the minimum Vmin to the closest molecular level. Importantly, Vmin...... is approximately half the voltage required to see a peak in the dI/dV curve. Information about the molecular level position can thus be obtained at relatively low voltages. In this work we show that the molecular level position can be determined at even lower voltages, Vmin(α), by finding the minimum of ln...

  4. Piezo Voltage Controlled Planar Hall Effect Devices

    Science.gov (United States)

    Zhang, Bao; Meng, Kang-Kang; Yang, Mei-Yin; Edmonds, K. W.; Zhang, Hao; Cai, Kai-Ming; Sheng, Yu; Zhang, Nan; Ji, Yang; Zhao, Jian-Hua; Zheng, Hou-Zhi; Wang, Kai-You

    2016-06-01

    The electrical control of the magnetization switching in ferromagnets is highly desired for future spintronic applications. Here we report on hybrid piezoelectric (PZT)/ferromagnetic (Co2FeAl) devices in which the planar Hall voltage in the ferromagnetic layer is tuned solely by piezo voltages. The change of planar Hall voltage is associated with magnetization switching through 90° in the plane under piezo voltages. Room temperature magnetic NOT and NOR gates are demonstrated based on the piezo voltage controlled Co2FeAl planar Hall effect devices without the external magnetic field. Our demonstration may lead to the realization of both information storage and processing using ferromagnetic materials.

  5. Piezo Voltage Controlled Planar Hall Effect Devices.

    Science.gov (United States)

    Zhang, Bao; Meng, Kang-Kang; Yang, Mei-Yin; Edmonds, K W; Zhang, Hao; Cai, Kai-Ming; Sheng, Yu; Zhang, Nan; Ji, Yang; Zhao, Jian-Hua; Zheng, Hou-Zhi; Wang, Kai-You

    2016-06-22

    The electrical control of the magnetization switching in ferromagnets is highly desired for future spintronic applications. Here we report on hybrid piezoelectric (PZT)/ferromagnetic (Co2FeAl) devices in which the planar Hall voltage in the ferromagnetic layer is tuned solely by piezo voltages. The change of planar Hall voltage is associated with magnetization switching through 90° in the plane under piezo voltages. Room temperature magnetic NOT and NOR gates are demonstrated based on the piezo voltage controlled Co2FeAl planar Hall effect devices without the external magnetic field. Our demonstration may lead to the realization of both information storage and processing using ferromagnetic materials.

  6. An electrochemical study of a liquid crystal used in information displays

    Science.gov (United States)

    Oglesby, D. M.; Kern, J. B.; Robertson, J. B.

    1974-01-01

    The operational lifetime of liquid crystal displays were investigated. Electrochemical reaction at the electrodes of the display can cause failure after 2000 to 3000 hours of operation. Studies using cyclic voltametry of electrochemical reactions of N (p-methoxybenzilidene p-butylaniline (MBBA), a nematic liquid crystal were made. These studies indicate the presence of a reversible reduction of MBBA at the cathode, and that the reduction product undergoes a further reaction leading to products which are not reversibly oxidized. It is concluded that the degradation of the liquid crystal in displays can be reduced with a suitable frequency of alternating voltage.

  7. New-type planar field emission display with superaligned carbon nanotube yarn emitter.

    Science.gov (United States)

    Liu, Peng; Wei, Yang; Liu, Kai; Liu, Liang; Jiang, Kaili; Fan, Shoushan

    2012-05-09

    With the superaligned carbon nanotube yarn as emitter, we have fabricated a 16 × 16 pixel field emission display prototype by adopting screen printing and laser cutting technologies. A planar diode field emission structure has been adopted. A very sharp carbon nanotube yarn tip emitter can be formed by laser cutting. Low voltage phosphor was coated on the anode electrodes also by screen printing. With a specially designed circuit, we have demonstrated the dynamic character display with the field emission display prototype. The emitter material and fabrication technologies in this paper are both easy to scale up to large areas.

  8. Capacitor Voltages Measurement and Balancing in Flying Capacitor Multilevel Converters Utilizing a Single Voltage Sensor

    DEFF Research Database (Denmark)

    Farivar, Glen; Ghias, Amer M. Y. M.; Hredzak, Branislav

    2017-01-01

    This paper proposes a new method for measuring capacitor voltages in multilevel flying capacitor (FC) converters that requires only one voltage sensor per phase leg. Multiple dc voltage sensors traditionally used to measure the capacitor voltages are replaced with a single voltage sensor at the ac...... side of the phase leg. The proposed method is subsequently used to balance the capacitor voltages using only the measured ac voltage. The operation of the proposed measurement and balancing method is independent of the number of the converter levels. Experimental results presented for a five-level FC...

  9. Fabricación reproducible de puntas de barrido para microscopios de efecto túnel

    Directory of Open Access Journals (Sweden)

    Rodrigo Bernal

    2008-05-01

    Full Text Available La fabricación reproducible de puntas de barrido para microscopios de efecto túnel es demostrada usando un método electroquímico. Las puntas son hechas a partir de alambre de tungsteno de 0.5 mm de diámetro. Controlando las condiciones de fabricación: la inmersión en la solución electrolítica, rangos de voltaje-corriente y duración del proceso se logra realizar puntas con relaciones de aspecto de 0.68 y radios de punta de 330 nm en el mejor caso./ Reproducible fabrication of Scanning Tunneling Microscope tips is carried out following an electrochemical procedure widely reported. Tips are made from 0.5 diameter tungsten wire. Controlling fabrication parameters (immersion in the electrochemical solution, current-voltage ranges, duration of the process, among others we achieve aspect ratios of 0.68 and tip radii of 330 nm in the best case.

  10. Voltage-Sensitive Load Controllers for Voltage Regulation and Increased Load Factor in Distribution Systems

    DEFF Research Database (Denmark)

    Douglass, Philip James; Garcia-Valle, Rodrigo; Østergaard, Jacob

    2014-01-01

    consumption which can be mapped to temperature setpoint offsets of thermostat controlled loads. In networks where a lower voltage level corresponds to high system load (and vice versa), this controller acts to regulate voltage and increase the load factor. Simulations are conducted on low- and medium-voltage......This paper presents a novel controller design for controlling appliances based on local measurements of voltage. The controller finds the normalized voltage deviation accounting for the sensitivity of voltage measurements to appliance state. The controller produces a signal indicating desired power...... distribution systems with residential loads including voltage-sensitive water heaters. In low-voltage systems, the results of the simulations show the controller to be effective at reducing the extremes of voltage and increasing the load factor while respecting end-use temperature constraints. In medium-voltage...

  11. Voltage-controlled photonic oscillator.

    Science.gov (United States)

    Savchenkov, A A; Ilchenko, V S; Liang, W; Eliyahu, D; Matsko, A B; Seidel, D; Maleki, L

    2010-05-15

    We report the development and demonstration of an X-band voltage-controlled photonic oscillator based on a whispering gallery mode resonator made of an electro-optic crystalline material. The oscillator has good spectral purity and wide, agile, linear tunability. We have modified the existing theoretical model of the opto-electronic oscillator to describe the performance of our tunable oscillator and have found a good agreement between the theoretical predictions and the measurement results. We show that the device is promising for higher-frequency applications where high-performance tunable oscillators with wide tunability do not exist.

  12. Reproducibility of high-resolution MRI for the middle cerebral artery plaque at 3 T

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Wan-Qun [Department of Radiology, Guangdong Academy of Medical Sciences, Guangdong General Hospital, Guangzhou, Guangdong 510080 (China); Huang, Biao, E-mail: cjr.huangbiao@vip.163.com [Department of Radiology, Guangdong Academy of Medical Sciences, Guangdong General Hospital, Guangzhou, Guangdong 510080 (China); Liu, Xin-Tong [Department of Neurology, Guangdong Academy of Medical Sciences, Guangdong General Hospital, Guangzhou, Guangdong 510080 (China); Liu, Hong-Jun; Li, Pei-Jun [Department of Radiology, Guangdong Academy of Medical Sciences, Guangdong General Hospital, Guangzhou, Guangdong 510080 (China); Zhu, Wen-Zhen, E-mail: zhuwenzhen@hotmail.com [Department of Radiology, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei 430030 (China)

    2014-01-15

    Purpose: To assess the reproducibility of HR-MRI for the identification of MCA atherosclerotic plaque components and quantification of stenosis. Materials and methods: Seventy-three consecutive subjects who initially had ischemic stroke or asymptomatic MCA stenosis (>50%) were enrolled in the study. All subjects were scanned using 3.0 T MRI. Two independent readers reviewed all images and one reader reevaluated all images four weeks later. The tissue components of plaques were analyzed qualitatively and the vessels were quantitative measured. Results: HR-MRI displayed the artery wall and lumen clearly. The intra-observer reproducibility was excellent for the identification of plaques (kappa [κ] = 0.96; 95% CI: 0.83–1.04) and contrast enhancement (κ = 0.89; 0.78–0.95); it was substantial for intra-plaque hemorrhage (κ = 0.79; 0.57–0.96) and the fibrous cap (κ = 0.65; 0.42–0.86). The inter-observer reproducibility was excellent for plaques (κ = 0.92; 0.73–1.06), substantial for contrast enhancement (κ = 0.80; 0.65–0.93), intra-plaque hemorrhage (κ = 0.68; 0.47–0.92) and moderate for the fibrous cap (κ = 0.58; 0.44–0.79). Both intra-observer and inter-observer reproducibility were excellent for quantitative vessel, lumen and wall measurements with intraclass correlation coefficients ranging from 0.91 to 0.97 and 0.87 to 0.96, respectively. However, vessel and wall areas and the intervals defined by the Bland–Altman plots were wide in comparison to the mean. Conclusions: The identification of MCA atherosclerotic plaque components and the quantification of vessel and lumen measurements are reproducible. The reproducibility is overall acceptable. HR-MRI may provide a useful tool for clinical risk evaluation in MCA atherosclerosis.

  13. Voltage Management in Unbalanced Low Voltage Networks Using a Decoupled Phase-Tap-Changer Transformer

    OpenAIRE

    Coppo, Massimiliano; Turri, Roberto; Marinelli, Mattia; Han, Xue

    2014-01-01

    The paper studies a medium voltage-low voltage transformer with a decoupled on load tap changer capability on each phase. The overall objective is the evaluation of the potential benefits on a low voltage network of such possibility. A realistic Danish low voltage network is used for the analysis. The load profiles are characterized by using single phase measurement data on voltages, currents and active powers with a 10 minutes resolution. Different scenarios are considered: no tap action, th...

  14. Low energy switching driver for printed electrochromic displays

    Science.gov (United States)

    Ionescu, Ciprian; Dobre, Robert Alexandru

    2016-12-01

    This paper continues our investigations in relatively new developed printed electrochromic displays (ECDs). There are some advantages of ECDs that recommend them for specific low end and short time disposable display applications, for instance the ECD devices present low power consumption (they are non-emissive, reflective, i.e. passive) and have a good viewing angle, looking like ink on paper. It is to note that these displays are still in research, and partly present on the market. There are a lot of papers regarding the chemistry and electro-chemistry of the device, but very few about concrete schematics for driving these displays. Due to their low penetration in applications, and due to lack of standardization, there are not yet realized custom drivers in form of integrated circuits. The driving of these circuits is not at all so simple. These are very sensitive devices in what it concerns exceeding the drive pulse duration and voltage level. In order to take full advantage of the low power consumption of this device, a good driver circuitry needs to be realized also in the "low power" class. We propose in this paper an original driving circuit, that has very low consumption and that can be even supplied by a supercapacitor or by a printed battery. The whole structure can be further integrated as a system on foil.

  15. Fast-response liquid-crystal lens for 3D displays

    Science.gov (United States)

    Liu, Yifan; Ren, Hongwen; Xu, Su; Li, Yan; Wu, Shin-Tson

    2014-02-01

    Three-dimensional (3D) display has become an increasingly important technology trend for information display applications. Dozens of different 3D display solutions have been proposed. The autostereoscopic 3D display based on lenticular microlens array is a promising approach, and fast-switching microlens array enables this system to display both 3D and conventional 2D images. Here we report two different fast-response microlens array designs. The first one is a blue phase liquid crystal lens driven by the Pedot: PSS resistive film electrodes. This BPLC lens exhibits several attractive features, such as polarization insensitivity, fast response time, simple driving scheme, and relatively low driving voltage, as compared to other BPLC lens designs. The second lens design has a double-layered structure. The first layer is a polarization dependent polymer microlens array, and the second layer is a thin twisted-nematic (TN) liquid crystal cell. When the TN cell is switched on/off, the traversing light through the polymeric lens array is either focused or defocused, so that 2D/3D images are displayed correspondingly. This lens design has low driving voltage, fast response time, and simple driving scheme. Simulation and experiment demonstrate that the performance of both switchable lenses meet the requirement of 3D display system design.

  16. SmartStretch™ technology. III. The impact of medium voltage stimulation and SmartStretch™ technology on sheep topside (m. semimembranosus) meat quality traits under commercial processing conditions.

    Science.gov (United States)

    Toohey, E S; van de Ven, R; Thompson, J M; Geesink, G H; Hopkins, D L

    2013-02-01

    This study evaluated the interaction between medium voltage electrical stimulation, SmartStretch™ stretching and ageing treatments on key meat quality traits of hot boned sheep m. semimembranosus. Medium voltage stimulation reduced initial pH (Pmeat quality traits. There was a significant interaction between stretch treatment and ageing (Pmeat display time.

  17. Demonstration of Vibrational Braille Code Display Using Large Displacement Micro-Electro-Mechanical Systems Actuators

    Science.gov (United States)

    Watanabe, Junpei; Ishikawa, Hiroaki; Arouette, Xavier; Matsumoto, Yasuaki; Miki, Norihisa

    2012-06-01

    In this paper, we present a vibrational Braille code display with large-displacement micro-electro-mechanical systems (MEMS) actuator arrays. Tactile receptors are more sensitive to vibrational stimuli than to static ones. Therefore, when each cell of the Braille code vibrates at optimal frequencies, subjects can recognize the codes more efficiently. We fabricated a vibrational Braille code display that used actuators consisting of piezoelectric actuators and a hydraulic displacement amplification mechanism (HDAM) as cells. The HDAM that encapsulated incompressible liquids in microchambers with two flexible polymer membranes could amplify the displacement of the MEMS actuator. We investigated the voltage required for subjects to recognize Braille codes when each cell, i.e., the large-displacement MEMS actuator, vibrated at various frequencies. Lower voltages were required at vibration frequencies higher than 50 Hz than at vibration frequencies lower than 50 Hz, which verified that the proposed vibrational Braille code display is efficient by successfully exploiting the characteristics of human tactile receptors.

  18. Displays for future intermediate UAV

    Science.gov (United States)

    Desjardins, Daniel; Metzler, James; Blakesley, David; Rister, Courtney; Nuhu, Abdul-Razak

    2008-04-01

    The Dedicated Autonomous Extended Duration Airborne Long-range Utility System (DAEDALUS) is a prototype Unmanned Aerial Vehicle (UAV) that won the 2007 AFRL Commander's Challenge. The purpose of the Commander's Challenge was to find an innovative solution to urgent warfighter needs by designing a UAV with increased persistence for tactical employment of sensors and communication systems. DAEDALUS was chosen as a winning prototype by AFRL, AFMC and SECAF. Follow-on units are intended to fill an intermediate role between currently fielded Tier I and Tier II UAV's. The UAV design discussed in this paper, including sensors and displays, will enter Phase II for Rapid Prototype Development with the intent of developing the design for eventual production. This paper will discuss the DAEDALUS UAV prototype system, with particular focus on its communications, to include the infrared sensor and electro-optical camera, but also displays, specifically man-portable.

  19. Characterization of the rotating display.

    Science.gov (United States)

    Keyes, J W; Fahey, F H; Harkness, B A; Eggli, D F; Balseiro, J; Ziessman, H A

    1988-09-01

    The rotating display is a useful method for reviewing single photon emission computed tomography (SPECT) data. This study evaluated the requirements for a subjectively pleasing and useful implementation of this technique. Twelve SPECT data sets were modified and viewed by several observers who recorded the minimum framing rates for apparent smooth rotation, 3D effect, effects of image size, and other parameters. The results showed that a minimum of 16 frames was needed for a useful display. Smaller image sizes and more frames were preferred. The recommended minimal framing rate for a 64-frame study is 16-17 frames per second and for a 32-frame study, 12-13 frames per second. Other enhancements also were useful.

  20. Interactive display of polygonal data

    Energy Technology Data Exchange (ETDEWEB)

    Wood, P.M.

    1977-10-01

    Interactive computer graphics is an excellent approach to many types of applications. It is an exciting method of doing geographic analysis when desiring to rapidly examine existing geographically related data or to display specially prepared data and base maps for publication. One such program is the interactive thematic mapping system called CARTE, which combines polygonal base maps with statistical data to produce shaded maps using a variety of shading symbolisms on a variety of output devices. A polygonal base map is one where geographic entities are described by points, lines, or polygons. It is combined with geocoded data to produce special subject or thematic maps. Shading symbolisms include texture shading for areas, varying widths for lines, and scaled symbols for points. Output devices include refresh and storage CRTs and auxiliary Calcomp or COM hardcopy. The system is designed to aid in the quick display of spatial data and in detailed map design.

  1. Game engines and immersive displays

    Science.gov (United States)

    Chang, Benjamin; Destefano, Marc

    2014-02-01

    While virtual reality and digital games share many core technologies, the programming environments, toolkits, and workflows for developing games and VR environments are often distinct. VR toolkits designed for applications in visualization and simulation often have a different feature set or design philosophy than game engines, while popular game engines often lack support for VR hardware. Extending a game engine to support systems such as the CAVE gives developers a unified development environment and the ability to easily port projects, but involves challenges beyond just adding stereo 3D visuals. In this paper we outline the issues involved in adapting a game engine for use with an immersive display system including stereoscopy, tracking, and clustering, and present example implementation details using Unity3D. We discuss application development and workflow approaches including camera management, rendering synchronization, GUI design, and issues specific to Unity3D, and present examples of projects created for a multi-wall, clustered, stereoscopic display.

  2. Proof nets for display logic

    CERN Document Server

    Moot, Richard

    2007-01-01

    This paper explores several extensions of proof nets for the Lambek calculus in order to handle the different connectives of display logic in a natural way. The new proof net calculus handles some recent additions to the Lambek vocabulary such as Galois connections and Grishin interactions. It concludes with an exploration of the generative capacity of the Lambek-Grishin calculus, presenting an embedding of lexicalized tree adjoining grammars into the Lambek-Grishin calculus.

  3. Modern Display Technologies and Applications

    Science.gov (United States)

    1982-01-01

    conventional tubes, LSI circuitry offers the possibility of correcting some of the deficiencies in electron-optic perform- ance and may lead to acceptable...certain ceramic materials such as PLZT (lead lanthanum zirconate titanate) can be utilized for display applications. PLZT is transparent in the visible...consuming power (3.8.12). 3.8.4.2 State of development, Magnetic particles have been made of polyethylene with powdered Strontium ferrite as a filler

  4. Fabrication of Electrophoretic Display Driven by Membrane Switch Array

    Science.gov (United States)

    Senda, Kazuo; Usui, Hiroaki

    2010-04-01

    Electrophoretic devices (EPDs) and organic light-emitting diodes (OLEDs) have potential application in a large-area flexible displays, such as digital signage. For this purpose, a new backplane is capable of driving a large unit is required instead of thin-film transistors. In this paper we describe the fabrication of a membrane switch array suitable for driving large-scale flat-panel displays. An array of membrane switches was prepared using flexible printed circuit (FPC) technology of polyimide films, by combining low-temperature processes of lamination and copper electroplating methods. An array of 256 matrix switches with a pixel size of 7 mm2 was prepared to drive the EPD front panel. The switches were driven at a voltage of about 40 V and a frequency of 10 Hz. The operation characteristics agreed well with the result of the theoretical calculation. The calculation also suggested that driving voltage can be lowered by increasing pixel size. The contact resistance of the membrane switch was as low as 0.2 Ω, which implies the wide applicability of this device for driving a variety of elements.

  5. Actively addressed single pixel full-colour plasmonic display

    Science.gov (United States)

    Franklin, Daniel; Frank, Russell; Wu, Shin-Tson; Chanda, Debashis

    2017-05-01

    Dynamic, colour-changing surfaces have many applications including displays, wearables and active camouflage. Plasmonic nanostructures can fill this role by having the advantages of ultra-small pixels, high reflectivity and post-fabrication tuning through control of the surrounding media. However, previous reports of post-fabrication tuning have yet to cover a full red-green-blue (RGB) colour basis set with a single nanostructure of singular dimensions. Here, we report a method which greatly advances this tuning and demonstrates a liquid crystal-plasmonic system that covers the full RGB colour basis set, only as a function of voltage. This is accomplished through a surface morphology-induced, polarization-dependent plasmonic resonance and a combination of bulk and surface liquid crystal effects that manifest at different voltages. We further demonstrate the system's compatibility with existing LCD technology by integrating it with a commercially available thin-film-transistor array. The imprinted surface interfaces readily with computers to display images as well as video.

  6. Multiview synthesis for autostereoscopic displays

    Science.gov (United States)

    Dane, Gökçe.; Bhaskaran, Vasudev

    2013-09-01

    Autostereoscopic (AS) displays spatially multiplex multiple views, providing a more immersive experience by enabling users to view the content from different angles without the need of 3D glasses. Multiple views could be captured from multiple cameras at different orientations, however this could be expensive, time consuming and not applicable to some applications. The goal of multiview synthesis in this paper is to generate multiple views from a stereo image pair and disparity map by using various video processing techniques including depth/disparity map processing, initial view interpolation, inpainting and post-processing. We specifically emphasize the need for disparity processing when there is no depth information is available that is associated with the 2D data and we propose a segmentation based disparity processing algorithm to improve disparity map. Furthermore we extend the texture based 2D inpainting algorithm to 3D and further improve the hole-filling performance of view synthesis. The benefit of each step of the proposed algorithm is demonstrated with comparison to state of the art algorithms in terms of visual quality and PSNR metric. Our system is evaluated in an end-to-end multi view synthesis framework where only stereo image pair is provided as input to the system and 8 views are outputted and displayed in 8-view Alioscopy AS display.

  7. 49 CFR 236.551 - Power supply voltage; requirement.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Power supply voltage; requirement. 236.551 Section... supply voltage; requirement. The voltage of power supply shall be maintained within 10 percent of rated voltage....

  8. Independent movement of the voltage sensors in KV2.1/KV6.4 heterotetramers.

    Science.gov (United States)

    Bocksteins, Elke; Snyders, Dirk J; Holmgren, Miguel

    2017-01-31

    Heterotetramer voltage-gated K(+) (KV) channels KV2.1/KV6.4 display a gating charge-voltage (QV) distribution composed by two separate components. We use state dependent chemical accessibility to cysteines substituted in either KV2.1 or KV6.4 to assess the voltage sensor movements of each subunit. By comparing the voltage dependences of chemical modification and gating charge displacement, here we show that each gating charge component corresponds to a specific subunit forming the heterotetramer. The voltage sensors from KV6.4 subunits move at more negative potentials than the voltage sensors belonging to KV2.1 subunits. These results indicate that the voltage sensors from the tetrameric channels move independently. In addition, our data shows that 75% of the total charge is attributed to KV2.1, while 25% to KV6.4. Thus, the most parsimonious model for KV2.1/KV6.4 channels' stoichiometry is 3:1.

  9. Reproducibility of thalamic segmentation based on probabilistic tractography.

    Science.gov (United States)

    Traynor, Catherine; Heckemann, Rolf A; Hammers, Alexander; O'Muircheartaigh, Jonathan; Crum, William R; Barker, Gareth J; Richardson, Mark P

    2010-08-01

    Reliable identification of thalamic nuclei is required to improve targeting of electrodes used in Deep Brain Stimulation (DBS), and for exploring the role of thalamus in health and disease. A previously described method using probabilistic tractography to segment the thalamus based on connections to cortical target regions was implemented. Both within- and between-subject reproducibility were quantitatively assessed by the overlap of the resulting segmentations; the effect of two different numbers of target regions (6 and 31) on reproducibility of the segmentation results was also investigated. Very high reproducibility was observed when a single dataset was processed multiple times using different starting conditions. Thalamic segmentation was also very reproducible when multiple datasets from the same subject were processed using six cortical target regions. Within-subject reproducibility was reduced when the number of target regions was increased, particularly in medial and posterior regions of the thalamus. A large degree of overlap in segmentation results from different subjects was obtained, particularly in thalamic regions classified as connecting to frontal, parietal, temporal and pre-central cortical target regions.

  10. Using prediction markets to estimate the reproducibility of scientific research.

    Science.gov (United States)

    Dreber, Anna; Pfeiffer, Thomas; Almenberg, Johan; Isaksson, Siri; Wilson, Brad; Chen, Yiling; Nosek, Brian A; Johannesson, Magnus

    2015-12-15

    Concerns about a lack of reproducibility of statistically significant results have recently been raised in many fields, and it has been argued that this lack comes at substantial economic costs. We here report the results from prediction markets set up to quantify the reproducibility of 44 studies published in prominent psychology journals and replicated in the Reproducibility Project: Psychology. The prediction markets predict the outcomes of the replications well and outperform a survey of market participants' individual forecasts. This shows that prediction markets are a promising tool for assessing the reproducibility of published scientific results. The prediction markets also allow us to estimate probabilities for the hypotheses being true at different testing stages, which provides valuable information regarding the temporal dynamics of scientific discovery. We find that the hypotheses being tested in psychology typically have low prior probabilities of being true (median, 9%) and that a "statistically significant" finding needs to be confirmed in a well-powered replication to have a high probability of being true. We argue that prediction markets could be used to obtain speedy information about reproducibility at low cost and could potentially even be used to determine which studies to replicate to optimally allocate limited resources into replications.

  11. Reproducibility of regional brain metabolic responses to lorazepam

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G.J.; Volkow, N.D.; Overall, J. [Brookhaven National Lab., Upton, NY (United States)]|[SUNY, Stony Brook, NY (United States)] [and others

    1996-10-01

    Changes in regional brain glucose metabolism in response to benzodiazepine agonists have been used as indicators of benzodiazepine-GABA receptor function. The purpose of this study was to assess the reproducibility of these responses. Sixteen healthy right-handed men underwent scanning with PET and [{sup 18}F]fluorodeoxyglucose (FDG) twice: before placebo and before lorazepam (30 {mu}g/kg). The same double FDG procedure was repeated 6-8 wk later on the men to assess test-retest reproducibility. The regional absolute brain metabolic values obtained during the second evaluation were significantly lower than those obtained from the first evaluation regardless of condition (p {le} 0.001). Lorazepam significantly and consistently decreased both whole-brain metabolism and the magnitude. The regional pattern of the changes were comparable for both studies (12.3% {plus_minus} 6.9% and 13.7% {plus_minus} 7.4%). Lorazepam effects were the largest in the thalamus (22.2% {plus_minus} 8.6% and 22.4% {plus_minus} 6.9%) and occipital cortex (19% {plus_minus} 8.9% and 21.8% {plus_minus} 8.9%). Relative metabolic measures were highly reproducible both for pharmacolgic and replication condition. This study measured the test-retest reproducibility in regional brain metabolic responses, and although the global and regional metabolic values were significantly lower for the repeated evaluation, the response to lorazepam was highly reproducible. 1613 refs., 3 figs., 3 tabs.

  12. Validation and reproducibility of an Australian caffeine food frequency questionnaire.

    Science.gov (United States)

    Watson, E J; Kohler, M; Banks, S; Coates, A M

    2017-08-01

    The aim of this study was to measure validity and reproducibility of a caffeine food frequency questionnaire (C-FFQ) developed for the Australian population. The C-FFQ was designed to assess average daily caffeine consumption using four categories of food and beverages including; energy drinks; soft drinks/soda; coffee and tea and chocolate (food and drink). Participants completed a seven-day food diary immediately followed by the C-FFQ on two consecutive days. The questionnaire was first piloted in 20 adults, and then, a validity/reproducibility study was conducted (n = 90 adults). The C-FFQ showed moderate correlations (r = .60), fair agreement (mean difference 63 mg) and reasonable quintile rankings indicating fair to moderate agreement with the seven-day food diary. To test reproducibility, the C-FFQ was compared to itself and showed strong correlations (r = .90), good quintile rankings and strong kappa values (κ = 0.65), indicating strong reproducibility. The C-FFQ shows adequate validity and reproducibility and will aid researchers in Australia to quantify caffeine consumption.

  13. Investigation of the touch sensitivity of ER fluid based tactile display

    Science.gov (United States)

    Liu, Yanju; Davidson, Rob; Taylor, Paul

    2005-05-01

    A tactile display is programmable device whose controlled surface is intended to be investigated by human touch. It has a great number of potential applications in the field of virtual reality and elsewhere. In this research, a 5x5 touch sensitive tactile display array including electrorheological (ER) fluid has been developed and investigated. Experimental results show that the sensed surface information could be controlled effectively by adjusting the voltage activation pattern imposed on the tactels. In the meantime, it is possible to sense the touching force normal to the display"s surface by monitoring the change of current passing through the ER fluid. These encouraging results are helpful for constructing a new type of tactile display based on ER fluid which can act as both sensor and actuator at the same time.

  14. Voltage Unbalance Compensation with Smart Three-phase Loads

    DEFF Research Database (Denmark)

    Douglass, Philip; Trintis, Ionut; Munk-Nielsen, Stig

    2016-01-01

    voltage, but it does not reduce the negative sequence voltage. The controller that uses phase-phase voltage as input eliminates negative sequence voltage, and reduces voltage deviations from the average to approximately half their initial value. Current unbalance is reduced when the voltage unbalance...... is caused by asymmetrical loads. These results suggest that the optimal algorithm to reduce system unbalance depends on which system parameter is most important: phase-neutral voltage unbalance, phase-phase voltage unbalance, or current unbalance....

  15. Power conditioning using dynamic voltage restorers under different voltage sag types

    Directory of Open Access Journals (Sweden)

    Ahmed M. Saeed

    2016-01-01

    Full Text Available Voltage sags can be symmetrical or unsymmetrical depending on the causes of the sag. At the present time, one of the most common procedures for mitigating voltage sags is by the use of dynamic voltage restorers (DVRs. By definition, a DVR is a controlled voltage source inserted between the network and a sensitive load through a booster transformer injecting voltage into the network in order to correct any disturbance affecting a sensitive load voltage. In this paper, modelling of DVR for voltage correction using MatLab software is presented. The performance of the device under different voltage sag types is described, where the voltage sag types are introduced using the different types of short-circuit faults included in the environment of the MatLab/Simulink package. The robustness of the proposed device is evaluated using the common voltage sag indices, while taking into account voltage and current unbalance percentages, where maintaining the total harmonic distortion percentage of the load voltage within a specified range is desired. Finally, several simulation results are shown in order to highlight that the DVR is capable of effective correction of the voltage sag while minimizing the grid voltage unbalance and distortion, regardless of the fault type.

  16. Power conditioning using dynamic voltage restorers under different voltage sag types.

    Science.gov (United States)

    Saeed, Ahmed M; Abdel Aleem, Shady H E; Ibrahim, Ahmed M; Balci, Murat E; El-Zahab, Essam E A

    2016-01-01

    Voltage sags can be symmetrical or unsymmetrical depending on the causes of the sag. At the present time, one of the most common procedures for mitigating voltage sags is by the use of dynamic voltage restorers (DVRs). By definition, a DVR is a controlled voltage source inserted between the network and a sensitive load through a booster transformer injecting voltage into the network in order to correct any disturbance affecting a sensitive load voltage. In this paper, modelling of DVR for voltage correction using MatLab software is presented. The performance of the device under different voltage sag types is described, where the voltage sag types are introduced using the different types of short-circuit faults included in the environment of the MatLab/Simulink package. The robustness of the proposed device is evaluated using the common voltage sag indices, while taking into account voltage and current unbalance percentages, where maintaining the total harmonic distortion percentage of the load voltage within a specified range is desired. Finally, several simulation results are shown in order to highlight that the DVR is capable of effective correction of the voltage sag while minimizing the grid voltage unbalance and distortion, regardless of the fault type.

  17. Relevant principal factors affecting the reproducibility of insect primary culture.

    Science.gov (United States)

    Ogata, Norichika; Iwabuchi, Kikuo

    2017-06-01

    The primary culture of insect cells often suffers from problems with poor reproducibility in the quality of the final cell preparations. The cellular composition of the explants (cell number and cell types), surgical methods (surgical duration and surgical isolation), and physiological and genetic differences between donors may be critical factors affecting the reproducibility of culture. However, little is known about where biological variation (interindividual differences between donors) ends and technical variation (variance in replication of culture conditions) begins. In this study, we cultured larval fat bodies from the Japanese rhinoceros beetle, Allomyrina dichotoma, and evaluated, using linear mixed models, the effect of interindividual variation between donors on the reproducibility of the culture. We also performed transcriptome analysis of the hemocyte-like cells mainly seen in the cultures using RNA sequencing and ultrastructural analyses of hemocytes using a transmission electron microscope, revealing that the cultured cells have many characteristics of insect hemocytes.

  18. Metaresearch for Evaluating Reproducibility in Ecology and Evolution

    Science.gov (United States)

    Fidler, Fiona; Chee, Yung En; Wintle, Bonnie C.; Burgman, Mark A.; McCarthy, Michael A.; Gordon, Ascelin

    2017-01-01

    Abstract Recent replication projects in other disciplines have uncovered disturbingly low levels of reproducibility, suggesting that those research literatures may contain unverifiable claims. The conditions contributing to irreproducibility in other disciplines are also present in ecology. These include a large discrepancy between the proportion of “positive” or “significant” results and the average statistical power of empirical research, incomplete reporting of sampling stopping rules and results, journal policies that discourage replication studies, and a prevailing publish-or-perish research culture that encourages questionable research practices. We argue that these conditions constitute sufficient reason to systematically evaluate the reproducibility of the evidence base in ecology and evolution. In some cases, the direct replication of ecological research is difficult because of strong temporal and spatial dependencies, so here, we propose metaresearch projects that will provide proxy measures of reproducibility. PMID:28596617

  19. Reproducibility of an organoleptic method for halitosis assessment

    Directory of Open Access Journals (Sweden)

    Késsia Suênia Fidelis de Mesquita-Guimarães

    2017-01-01

    Full Text Available Background: The organoleptic evaluation is considered the gold standard between evaluation methods of halitosis, but its main drawback is the difficulty of reproducibility. Purpose: The aim of this study was to evaluate the reproducibility of an organoleptic evaluation method using three levels of scores (0 = no odor, 1 = moderate odor, and 2 = strong odor to increase reliability between researchers and clinicians. Methods: The evaluation was blindly conducted by two examiners previously calibrated by the Smell Identification Test and compliance in clinical trials. Statistical calculations were done with STATA ® software version 9.0. Results: The degree of agreement between examiners was 82.5%, with estimated Kappa (κ =0.69, with substantial agreement.   Conclusion: The scale used in this study by organoleptic method was effective and reproducible but must be repeated and compared to other methods for better consistency of results.

  20. CRKSPH - A Conservative Reproducing Kernel Smoothed Particle Hydrodynamics Scheme

    CERN Document Server

    Frontiere, Nicholas; Owen, J Michael

    2016-01-01

    We present a formulation of smoothed particle hydrodynamics (SPH) that employs a first-order consistent reproducing kernel function, exactly interpolating linear fields with particle tracers. Previous formulations using reproducing kernel (RK) interpolation have had difficulties maintaining conservation of momentum due to the fact the RK kernels are not, in general, spatially symmetric. Here, we utilize a reformulation of the fluid equations such that mass, momentum, and energy are all manifestly conserved without any assumption about kernel symmetries. Additionally, by exploiting the increased accuracy of the RK method's gradient, we formulate a simple limiter for the artificial viscosity that reduces the excess diffusion normally incurred by the ordinary SPH artificial viscosity. Collectively, we call our suite of modifications to the traditional SPH scheme Conservative Reproducing Kernel SPH, or CRKSPH. CRKSPH retains the benefits of traditional SPH methods (such as preserving Galilean invariance and manif...

  1. Gestures to Intuitively Control Large Displays

    NARCIS (Netherlands)

    Fikkert, F.W.; Vet, van der P.E.; Rauwerda, H.; Breit, T.; Nijholt, A.; Sales Dias, M.; Gibet, S.; Wanderley, M.W.; Bastos, R.

    2009-01-01

    Large displays are highly suited to support discussions in empirical science. Such displays can display project results on a large digital surface to feed the discussion. This paper describes our approach to closely involve multidisciplinary omics scientists in the design of an intuitive display con

  2. 27 CFR 6.55 - Display service.

    Science.gov (United States)

    2010-04-01

    ... Distribution Service § 6.55 Display service. Industry member reimbursements to retailers for setting up product or other displays constitutes paying the retailer for rendering a display service within the meaning... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Display service. 6.55...

  3. Effective Form of Reproducing the Total Financial Potential of Ukraine

    Directory of Open Access Journals (Sweden)

    Portna Oksana V.

    2015-03-01

    Full Text Available Development of scientific principles of reproducing the total financial potential of the country and its effective form is an urgent problem both in theoretical and practical aspects of the study, the solution of which is intended to ensure the active mobilization and effective use of the total financial potential of Ukraine, and as a result — its expanded reproduction as well, which would contribute to realization of the internal capacities for stabilization of the national economy. The purpose of the article is disclosing the essence of the effective form of reproducing the total financial potential of the country, analyzing the results of reproducing the total financial potential of Ukraine. It has been proved that the basis for the effective form of reproducing the total financial potential of the country is the volume and flow of resources, which are associated with the «real» economy, affect the dynamics of GDP and define it, i.e. resource and process forms of reproducing the total financial potential of Ukraine (which precede the effective one. The analysis of reproducing the total financial potential of Ukraine has shown that in the analyzed period there was an increase in the financial possibilities of the country, but steady dynamics of reduction of the total financial potential was observed. If we consider the amount of resources involved in production, creating a net value added and GDP, it occurs on a restricted basis. Growth of the total financial potential of Ukraine is connected only with extensive quantitative factors rather than intensive qualitative changes.

  4. Reproducibility of psychophysics and electroencephalography during offset analgesia.

    Science.gov (United States)

    Nilsson, M; Piasco, A; Nissen, T D; Graversen, C; Gazerani, P; Lucas, M-F; Dahan, A; Drewes, A M; Brock, C

    2014-07-01

    Offset analgesia (OA) is a pain-inhibiting mechanism, defined as a disproportionately large decrease in pain perception in response to a discrete decrease in noxious stimulus intensity. Hence, the aims were (1) to investigate whether psychophysics and electroencephalography (EEG) can be assessed simultaneously during OA and (2) to assess whether OA is reproducible within the same day as well as between different days. Two separate studies investigated OA: Study I (13 healthy volunteers; seven men; 25.5 ± 0.65 years) aimed at determining the feasibility of recording psychophysics and EEG simultaneously during OA. Study II (18 healthy volunteers; 12 men; 34 ± 3.15 years) assessed reproducibility of OA in terms of psychophysics and EEG. Subjects were presented to a 30-s OA heat stimulus paradigm on the volar forearm and psychophysics, and EEG recordings were obtained throughout the procedure. Reproducibility was assessed within the same day and between different days, using intraclass correlation coefficients (ICCs). Additionally, the reproducible psychophysical parameters were correlated to relevant EEG frequency bands. Simultaneous recording of psychophysics and EEG affects the frequency distribution in terms of alpha suppression. Reproducibility was proven for the psychophysics and EEG frequency bands both within the same day (all ICCs > 0.62) and between different days (all ICCs > 0.66, except for the delta band). Correlations between psychophysics and EEG were found in the theta (4-8 Hz), alpha (8-12 Hz) and gamma (32-80 Hz) bands (all p < 0.01). OA is a robust and reproducible model for experimental pain research, making it suitable for future research. © 2013 European Pain Federation - EFIC®

  5. Reproducibility of Circulating MicroRNAs in Stored Plasma Samples.

    Directory of Open Access Journals (Sweden)

    Monica L Bertoia

    Full Text Available Most studies of microRNA (miRNA and disease have examined tissue-specific expression in limited numbers of samples. The presence of circulating miRNAs in plasma samples provides the opportunity to examine prospective associations between miRNA expression and disease in initially healthy individuals. However, little data exist on the reproducibility of miRNAs in stored plasma.We used Real-Time PCR to measure 61 pre-selected microRNA candidates in stored plasma. Coefficients of variation (CVs were used to assess inter-assay reliability (n = 15 and within-person stability over one year (n = 80. Intraclass correlation coefficients (ICCs and polychoric correlation coefficients were used to assess within-person stability and delayed processing reproducibility (whole blood stored at 4°C for 0, 24 and 48 hours; n = 12 samples.Of 61 selected miRNAs, 23 were detected in at least 50% of samples and had average CVs below 20% for inter-assay reproducibility and 31 for delayed processing reproducibility. Ten miRNAs were detected in at least 50% of samples, had average CVs below 20% and had ICCs above 0.4 for within-person stability over 1-2 years, six of which satisfied criteria for both interassay reproducibility and short-term within-person stability (miR-17-5p, -191-5p, -26a-5p, -27b-3p, -320a, and -375 and two all three types of reproducibility (miR-27b-3p and -26a-5p. However, many miRNAs with acceptable average CVs had high maximum CVs, most had low expression levels, and several had low ICCs with delayed processing.About a tenth of miRNAs plausibly related to chronic disease were reliably detected in stored samples of healthy adults.

  6. Reproducibility of graph metrics in fMRI networks

    Directory of Open Access Journals (Sweden)

    Qawi K Telesford

    2010-12-01

    Full Text Available The reliability of graph metrics calculated in network analysis is essential to the interpretation of complex network organization. These graph metrics are used to deduce the small-world properties in networks. In this study, we investigated the test-retest reliability of graph metrics from functional magnetic resonance imaging (fMRI data collected for two runs in 45 healthy older adults. Graph metrics were calculated on data for both runs and compared using intraclass correlation coefficient (ICC statistics and Bland-Altman (BA plots. ICC scores describe the level of absolute agreement between two measurements and provide a measure of reproducibility. For mean graph metrics, ICC scores were high for clustering coefficient (ICC=0.86, global efficiency (ICC=0.83, path length (ICC=0.79, and local efficiency (ICC=0.75; the ICC score for degree was found to be low (ICC=0.29. ICC scores were also used to generate reproducibility maps in brain space to test voxel-wise reproducibility for unsmoothed and smoothed data. Reproducibility was uniform across the brain for global efficiency and path length, but was only high in network hubs for clustering coefficient, local efficiency and degree. BA plots were used to test the measurement repeatability of all graph metrics. All graph metrics fell within the limits for repeatability. Together, these results suggest that with exception of degree, mean graph metrics are reproducible and suitable for clinical studies. Further exploration is warranted to better understand reproducibility across the brain on a voxel-wise basis.

  7. Benchmarking contactless acquisition sensor reproducibility for latent fingerprint trace evidence

    Science.gov (United States)

    Hildebrandt, Mario; Dittmann, Jana

    2015-03-01

    Optical, nano-meter range, contactless, non-destructive sensor devices are promising acquisition techniques in crime scene trace forensics, e.g. for digitizing latent fingerprint traces. Before new approaches are introduced in crime investigations, innovations need to be positively tested and quality ensured. In this paper we investigate sensor reproducibility by studying different scans from four sensors: two chromatic white light sensors (CWL600/CWL1mm), one confocal laser scanning microscope, and one NIR/VIS/UV reflection spectrometer. Firstly, we perform an intra-sensor reproducibility testing for CWL600 with a privacy conform test set of artificial-sweat printed, computer generated fingerprints. We use 24 different fingerprint patterns as original samples (printing samples/templates) for printing with artificial sweat (physical trace samples) and their acquisition with contactless sensory resulting in 96 sensor images, called scan or acquired samples. The second test set for inter-sensor reproducibility assessment consists of the first three patterns from the first test set, acquired in two consecutive scans using each device. We suggest using a simple feature space set in spatial and frequency domain known from signal processing and test its suitability for six different classifiers classifying scan data into small differences (reproducible) and large differences (non-reproducible). Furthermore, we suggest comparing the classification results with biometric verification scores (calculated with NBIS, with threshold of 40) as biometric reproducibility score. The Bagging classifier is nearly for all cases the most reliable classifier in our experiments and the results are also confirmed with the biometric matching rates.

  8. High voltage load resistor array

    Energy Technology Data Exchange (ETDEWEB)

    Lehmann, Monty Ray [Smithfield, VA

    2005-01-18

    A high voltage resistor comprising an array of a plurality of parallel electrically connected resistor elements each containing a resistive solution, attached at each end thereof to an end plate, and about the circumference of each of the end plates, a corona reduction ring. Each of the resistor elements comprises an insulating tube having an electrode inserted into each end thereof and held in position by one or more hose clamps about the outer periphery of the insulating tube. According to a preferred embodiment, the electrode is fabricated from stainless steel and has a mushroom shape at one end, that inserted into the tube, and a flat end for engagement with the end plates that provides connection of the resistor array and with a load.

  9. Reproducibility of esophageal scintigraphy using semi-solid yoghurt

    Energy Technology Data Exchange (ETDEWEB)

    Imai, Yukinori; Kinoshita, Manabu; Asakura, Yasushi; Kakinuma, Tohru; Shimoji, Katsunori; Fujiwara, Kenji; Suzuki, Kenji; Miyamae, Tatsuya [Saitama Medical School, Moroyama (Japan)

    1999-10-01

    Esophageal scintigraphy is a non-invasive method which evaluate esophageal function quantitatively. We applied new technique using semi-solid yoghurt, which can evaluate esophageal function in a sitting position. To evaluate the reproducibility of this method, scintigraphy were performed in 16 healthy volunteers. From the result of four swallows except the first one, the mean coefficients of variation in esophageal transit time and esophageal emptying time were 12.8% and 13.4% respectively (interday variation). As regards the interday variation, this method had also good reproducibility from the result on the 2 separate days. (author)

  10. Reproducing Kernel Particle Method for Non-Linear Fracture Analysis

    Institute of Scientific and Technical Information of China (English)

    Cao Zhongqing; Zhou Benkuan; Chen Dapeng

    2006-01-01

    To study the non-linear fracture, a non-linear constitutive model for piezoelectric ceramics was proposed, in which the polarization switching and saturation were taken into account. Based on the model, the non-linear fracture analysis was implemented using reproducing kernel particle method (RKPM). Using local J-integral as a fracture criterion, a relation curve of fracture loads against electric fields was obtained. Qualitatively, the curve is in agreement with the experimental observations reported in literature. The reproducing equation, the shape function of RKPM, and the transformation method to impose essential boundary conditions for meshless methods were also introduced. The computation was implemented using object-oriented programming method.

  11. Some remarks about interpolating sequences in reproducing kernel Hilbert spaces

    CERN Document Server

    Raghupathi, Mrinal

    2011-01-01

    In this paper we study two separate problems on interpolation. We first give a new proof of Stout's Theorem on necessary and sufficient conditions for a sequence of points to be an interpolating sequence for the multiplier algebra and for an associated Hilbert space. We next turn our attention to the question of interpolation for reproducing kernel Hilbert spaces on the polydisc and provide a collection of equivalent statements about when it is possible to interpolation in the Schur-Agler class of the associated reproducing kernel Hilbert space.

  12. Voltage-Controlled Floating Resistor Using DDCC

    Directory of Open Access Journals (Sweden)

    M. Kumngern

    2011-04-01

    Full Text Available This paper presents a new simple configuration to realize the voltage-controlled floating resistor, which is suitable for integrated circuit implementation. The proposed resistor is composed of three main components: MOS transistor operating in the non-saturation region, DDCC, and MOS voltage divider. The MOS transistor operating in the non-saturation region is used to configure a floating linear resistor. The DDCC and the MOS transistor voltage divider are used for canceling the nonlinear component term of MOS transistor in the non-saturation region to obtain a linear current/voltage relationship. The DDCC is employed to provide a simple summer of the circuit. This circuit offers an ease for realizing the voltage divider circuit and the temperature effect that includes in term of threshold voltage can be compensated. The proposed configuration employs only 16 MOS transistors. The performances of the proposed circuit are simulated with PSPICE to confirm the presented theory.

  13. Review of Defense Display Research Programs

    Science.gov (United States)

    2001-01-01

    Programs Flat Panel Autostereoscopic N-perspective 3D High Definition DMD Digital Projector Light Piping & Quantum Cavity Displays Solid State Laser...Megapixel Displays • Size Commonality • 67 % Weight Reduction • > 200 sq. in. per Display 20-20 Vision Simulators True 3D , sparse symbols Foldable Display...megapixel 2D and True 3D Display Technology 25M & T3D FY02-FY06 New service thrusts

  14. Recent Trend in Development of Olfactory Displays

    Science.gov (United States)

    Yanagida, Yasuyuki

    An olfactory display is a device that generates scented air with desired concentration of aroma, and delivers it to the user's olfactory organ. In this article, the nature of olfaction is briefly described from the view point of how to configure olfactory displays. Next, component technologies to compose olfactory displays, i.e., making scents and delivering scents, are categorized. Several existing olfactory display systems are introduced to show the current status of research and development of olfactory displays.

  15. Programable Driver for Voltage-Controlled Oscillators

    Science.gov (United States)

    Fowler, L. E.; Mcneil, J. A.

    1985-01-01

    Electronically programable read-only memory (EPROM) and digital-to-analog converter provide customized time-varying voltage for frequency modulation. Voltage used to modulate IMPATT oscillator that serves as microwave pump for solid-state maser in low-noise amplifier. EPROM simple to tailor voltage waveform to suit characteristics of given maser. Digital information for waveform programed into EPROM chip; digital-to-analog converter reads information and produces corresponding analog wave. Principle readily adapted to other applications.

  16. Generator of ultrashort megavolt voltage pulses

    CERN Document Server

    Zheltov, K A; Shalimanov, V F

    2002-01-01

    Paper describes approx 3 ns duration and > 1 MW amplitude voltage pulse generator under high-ohmic (approx 450 Ohm) load. Generator comprises pulse transformer with magnetized core, as well as, resonance tuned circuit of high-voltage solenoid and accumulating spaces of a shaping line containing, moreover, spark gap to switch charge in transmitting line. Paper contains the results of voltage measuring in generator basic units

  17. Investigation of pulsed voltage limiters characteristics

    Directory of Open Access Journals (Sweden)

    Karimov A. V.

    2012-06-01

    Full Text Available A new method for measuring the voltage limit is offered. It has been designed to measure high-power pulsed current of voltage limiters. The error of this method is half as much as the error of the known method of direct measurement. The investigation of dependence of power capability of single-crystal and double-crystal voltage limiters and of the pulsed operation time on pulse duration.

  18. Low-Voltage Switched-Capacitor Circuits

    DEFF Research Database (Denmark)

    Bidari, E.; Keskin, M.; Maloberti, F.

    1999-01-01

    Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications.......Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications....

  19. Characterisation of the VELO High Voltage System

    CERN Document Server

    Rakotomiaramanana, B; Eklund, L

    2008-01-01

    The high voltage system supplies the bias voltage to the 88 silicon sensors which comprise the LHCb Vertex Locator (VELO). This note describes the results of the tests which have been performed on the hardware of the high voltage system of the VELO. Each individual test detailed in this note corresponds to a specific requirement of the system. These requirements arise primarily from ensuring the safety of the silicon sensors and the quality of the data taken from the VELO modules. The tests performed are in four categories: normal operation of the high voltage system; vercation of its stability under operation; discussion of its behaviour in failure modes; and details of operation at low voltage. Noteworthy issues, identified through the tests, include the behaviour of the high voltage modules at voltages below 9V, the current limit that can be applied during ramping of the voltage, and the speed with which the voltage is cut during failures of the system. The results of these tests provide high confidence th...

  20. Characterisation of the VELO High Voltage System

    CERN Document Server

    Rakotomiaramanana, B; Parkes, C; Eklund, L

    2008-01-01

    The high voltage system supplies the bias voltage to the 88 silicon sensors which comprise the LHCb Vertex Locator (VELO). This note describes the results of the tests which have been performed on the hardware of the high voltage system of the VELO. Each individual test detailed in this note corresponds to a specific requirement of the system. These requirements arise primarily from ensuring the safety of the silicon sensors and the quality of the data taken from the VELO modules. The tests performed are in four categories: normal operation of the high voltage system; verification of its stability under operation; discussion of its behaviour in failure modes; and details of operation at low voltage. Noteworthy issues, identified through the tests, include the behaviour of the high voltage modules at voltages below 9V, the current limit that can be applied during ramping of the voltage, and the speed with which the voltage is cut during failures of the system. The results of these tests provide high confidence...

  1. Microprocessor-controlled, programmable ramp voltage generator

    Energy Technology Data Exchange (ETDEWEB)

    Hopwood, J.

    1978-11-01

    A special-purpose voltage generator has been developed for driving the quadrupole mass filter of a residual gas analyzer. The generator is microprocessor-controlled with desired ramping parameters programmed by setting front-panel digital thumb switches. The start voltage, stop voltage, and time of each excursion are selectable. A maximum of five start-stop levels may be pre-selected for each program. The ramp voltage is 0 to 10 volts with sweep times from 0.1 to 999.99 seconds.

  2. Magnetoelectric voltage coefficients of magnetoelectric composites

    Institute of Scientific and Technical Information of China (English)

    WAN Yong-ping; ZHONG Zheng; QIU Jin-hao

    2006-01-01

    The magnetoelectric(ME) effect of the particulate magnetostrictive/piezoelectric composite was theoretically studied. The dependence of the ME voltage coefficients on the material properties of the magnetostrictive phase was discussed. The permittivity,permeability and the elastic modulus of the magnetostrictive phase generally have obvious influences on the ME voltage coefficients. The magnetostrictive phase with a large permittivity,large permeability or stiffer modulus will respectively contribute to the higher ME voltage coefficients. For a certain kind of piezoelectric matrix,the ME voltage coefficients can be improved to some extent by choosing those magnetostrictive materials with large permittivity,permeability or high elastic modulus.

  3. Maximum permissible voltage of YBCO coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)

    2014-06-15

    Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.

  4. Inductive voltage divider modeling in Matlab

    Science.gov (United States)

    Andreev, S. A.; Kim, V. L.

    2017-01-01

    Inductive voltage dividers have the most appropriate metrological characteristics on alternative current and are widely used for converting physical signals. The model of a double-decade inductive voltage divider was designed with the help of Matlab/Simulink. The first decade is an inductive voltage divider with balanced winding, the second decade is a single-stage inductive voltage divider. In the paper, a new transfer function algorithm was given. The study shows errors and differences that appeared between the third degree reduced model and a twenty degree unreduced model. The obtained results of amplitude error differ no more than by 7 % between the reduced and unreduced model.

  5. Development of a voltage scanner of chopper

    CERN Document Server

    Shen Guan Ren; LiShengLi; WangQuanXing; Wu Long Cheng

    2001-01-01

    Development of voltage sweeper of chopper with CPNG are introduced. Voltage sweeper is one of important key parts of chopper. Two years working prove that it is stable and reliable. Its main technology performance save: sine wave frequency: 750 kHz +- 20 Hz; total distortion: 65 Db; output voltage (V-V): 0->=4000 V; the error7 W; voltage supply: 220V AC +-10%, 50 +- 1 Hz; total power supply: <100W; Work temperature range: 0 - 40 degree; Stability in long time <=1%

  6. A Rationally Designed, General Strategy for Membrane Orientation of Photoinduced Electron Transfer-Based Voltage-Sensitive Dyes.

    Science.gov (United States)

    Kulkarni, Rishikesh U; Yin, Hang; Pourmandi, Narges; James, Feroz; Adil, Maroof M; Schaffer, David V; Wang, Yi; Miller, Evan W

    2017-02-17

    Voltage imaging with fluorescent dyes offers promise for interrogating the complex roles of membrane potential in coordinating the activity of neurons in the brain. Yet, low sensitivity often limits the broad applicability of optical voltage indicators. In this paper, we use molecular dynamics (MD) simulations to guide the design of new, ultrasensitive fluorescent voltage indicators that use photoinduced electron transfer (PeT) as a voltage-sensing switch. MD simulations predict an approximately 16% increase in voltage sensitivity resulting purely from improved alignment of dye with the membrane. We confirm this theoretical finding by synthesizing 9 new voltage-sensitive (VoltageFluor, or VF) dyes and establishing that all of them display the expected improvement of approximately 19%. This synergistic outworking of theory and experiment enabled computational and theoretical estimation of VF dye orientation in lipid bilayers and has yielded the most sensitive PeT-based VF dye to date. We use this new voltage indicator to monitor voltage spikes in neurons from rat hippocampus and human pluripotent-stem-cell-derived dopaminergic neurons.

  7. Optical display for radar sensing

    Science.gov (United States)

    Szu, Harold; Hsu, Charles; Willey, Jefferson; Landa, Joseph; Hsieh, Minder; Larsen, Louis V.; Krzywicki, Alan T.; Tran, Binh Q.; Hoekstra, Philip; Dillard, John T.; Krapels, Keith A.; Wardlaw, Michael; Chu, Kai-Dee

    2015-05-01

    Boltzmann headstone S = kB Log W turns out to be the Rosette stone for Greek physics translation optical display of the microwave sensing hieroglyphics. The LHS is the molecular entropy S measuring the degree of uniformity scattering off the sensing cross sections. The RHS is the inverse relationship (equation) predicting the Planck radiation spectral distribution parameterized by the Kelvin temperature T. Use is made of the conservation energy law of the heat capacity of Reservoir (RV) change T Δ S = -ΔE equals to the internal energy change of black box (bb) subsystem. Moreover, an irreversible thermodynamics Δ S > 0 for collision mixing toward totally larger uniformity of heat death, asserted by Boltzmann, that derived the so-called Maxwell-Boltzmann canonical probability. Given the zero boundary condition black box, Planck solved a discrete standing wave eigenstates (equation). Together with the canonical partition function (equation) an average ensemble average of all possible internal energy yielded the celebrated Planck radiation spectral (equation) where the density of states (equation). In summary, given the multispectral sensing data (equation), we applied Lagrange Constraint Neural Network (LCNN) to solve the Blind Sources Separation (BSS) for a set of equivalent bb target temperatures. From the measurements of specific value, slopes and shapes we can fit a set of Kelvin temperatures T's for each bb targets. As a result, we could apply the analytical continuation for each entropy sources along the temperature-unique Planck spectral curves always toward the RGB color temperature display for any sensing probing frequency.

  8. Simulated monitor display for CCTV

    Energy Technology Data Exchange (ETDEWEB)

    Steele, B.J.

    1982-01-01

    Two computer programs have been developed which generate a two-dimensional graphic perspective of the video output produced by a Closed Circuit Television (CCTV) camera. Both programs were primarily written to produce a graphic display simulating the field-of-view (FOV) of a perimeter assessment system as seen on a CCTV monitor. The original program was developed for use on a Tektronix 4054 desktop computer; however, the usefulness of this graphic display program led to the development of a similar program for a Hewlett-Packard 9845B desktop computer. After entry of various input parameters, such as, camera lens and orientation, the programs automatically calculate and graphically plot the locations of various items, e.g., fences, an assessment zone, running men, and intrusion detection sensors. Numerous special effects can be generated to simulate such things as roads, interior walls, or sides of buildings. Other objects can be digitized and entered into permanent memory similar to the running men. With this type of simulated monitor perspective, proposed camera locations with respect to fences and a particular assessment zone can be rapidly evaluated without the costly time delays and expenditures associated with field evaluation.

  9. Flat-panel electronic displays: a triumph of physics, chemistry and engineering.

    Science.gov (United States)

    Hilsum, Cyril

    2010-03-13

    This paper describes the history and science behind the development of modern flat-panel displays, and assesses future trends. Electronic displays are an important feature of modern life. For many years the cathode ray tube, an engineering marvel, was universal, but its shape was cumbersome and its operating voltage too high. The need for a flat-panel display, working at a low voltage, became imperative, and much research has been applied to this need. Any versatile flat-panel display will exploit an electro-optical effect, a transparent conductor and an addressing system to deliver data locally. The first need is to convert an electrical signal into a visible change. Two methods are available, the first giving emission of light, the second modulating ambient illumination. The most useful light-emitting media are semiconductors, historically exploiting III-V or II-VI compounds, but more recently organic or polymer semiconductors. Another possible effect uses gas plasma discharges. The modulating, or subtractive, effects that have been studied include liquid crystals, electrophoresis, electrowetting and electrochromism. A transparent conductor makes it possible to apply a voltage to an extended area while observing the results. The design is a compromise, since the free electrons that carry current also absorb light. The first materials used were metals, but some semiconductors, when heavily doped, give a better balance, with high transmission for a low resistance. Delivering data unambiguously to a million or so picture elements across the display area is no easy task. The preferred solution is an amorphous silicon thin-film transistor deposited at each cross-point in an X-Y matrix. Success in these endeavours has led to many applications for flat-panel displays, including television, flexible displays, electronic paper, electronic books and advertising signs.

  10. Excitation of voltage oscillations in an induction voltage adder

    Directory of Open Access Journals (Sweden)

    Nichelle Bruner

    2009-07-01

    Full Text Available The induction voltage adder is an accelerator architecture used in recent designs of pulsed-power driven x-ray radiographic systems such as Sandia National Laboratories’ Radiographic Integrated Test Stand (RITS, the Atomic Weapons Establishment’s planned Hydrus Facility, and the Naval Research Laboratory’s Mercury. Each of these designs relies on magnetic insulation to prevent electron loss across the anode-cathode gap in the vicinity of the adder as well as in the coaxial transmission line. Particle-in-cell simulations of the RITS adder and transmission line show that, as magnetic insulation is being established during a pulse, some electron loss occurs across the gap. Sufficient delay in the cavity pulse timings provides an opportunity for high-momentum electrons to deeply penetrate the cavities of the adder cells where they can excite radio-frequency resonances. These oscillations may be amplified in subsequent gaps, resulting in oscillations in the output power. The specific modes supported by the RITS-6 accelerator and details of the mechanism by which they are excited are presented in this paper.

  11. Spatial aspects of reproduced sound in small rooms

    DEFF Research Database (Denmark)

    Bech, Søren

    1998-01-01

    This paper reports on the influence of individual reflections on the auditory spatial aspects of reproduced sound. The sound field produced by a single loudspeaker positioned in a normal listening room has been simulated using an electroacoustical synthesis of the direct sound, 17 individual refl...

  12. Measurement of Liver Iron Concentration by MRI Is Reproducible

    Directory of Open Access Journals (Sweden)

    José María Alústiza

    2015-01-01

    Full Text Available Purpose. The objectives were (i construction of a phantom to reproduce the behavior of iron overload in the liver by MRI and (ii assessment of the variability of a previously validated method to quantify liver iron concentration between different MRI devices using the phantom and patients. Materials and Methods. A phantom reproducing the liver/muscle ratios of two patients with intermediate and high iron overload. Nine patients with different levels of iron overload were studied in 4 multivendor devices and 8 of them were studied twice in the machine where the model was developed. The phantom was analysed in the same equipment and 14 times in the reference machine. Results. FeCl3 solutions containing 0.3, 0.5, 0.6, and 1.2 mg Fe/mL were chosen to generate the phantom. The average of the intramachine variability for patients was 10% and for the intermachines 8%. For the phantom the intramachine coefficient of variation was always below 0.1 and the average of intermachine variability was 10% for moderate and 5% for high iron overload. Conclusion. The phantom reproduces the behavior of patients with moderate or high iron overload. The proposed method of calculating liver iron concentration is reproducible in several different 1.5 T systems.

  13. ReproPhylo: An Environment for Reproducible Phylogenomics.

    Science.gov (United States)

    Szitenberg, Amir; John, Max; Blaxter, Mark L; Lunt, David H

    2015-09-01

    The reproducibility of experiments is key to the scientific process, and particularly necessary for accurate reporting of analyses in data-rich fields such as phylogenomics. We present ReproPhylo, a phylogenomic analysis environment developed to ensure experimental reproducibility, to facilitate the handling of large-scale data, and to assist methodological experimentation. Reproducibility, and instantaneous repeatability, is built in to the ReproPhylo system and does not require user intervention or configuration because it stores the experimental workflow as a single, serialized Python object containing explicit provenance and environment information. This 'single file' approach ensures the persistence of provenance across iterations of the analysis, with changes automatically managed by the version control program Git. This file, along with a Git repository, are the primary reproducibility outputs of the program. In addition, ReproPhylo produces an extensive human-readable report and generates a comprehensive experimental archive file, both of which are suitable for submission with publications. The system facilitates thorough experimental exploration of both parameters and data. ReproPhylo is a platform independent CC0 Python module and is easily installed as a Docker image or a WinPython self-sufficient package, with a Jupyter Notebook GUI, or as a slimmer version in a Galaxy distribution.

  14. ReproPhylo: An Environment for Reproducible Phylogenomics.

    Directory of Open Access Journals (Sweden)

    Amir Szitenberg

    2015-09-01

    Full Text Available The reproducibility of experiments is key to the scientific process, and particularly necessary for accurate reporting of analyses in data-rich fields such as phylogenomics. We present ReproPhylo, a phylogenomic analysis environment developed to ensure experimental reproducibility, to facilitate the handling of large-scale data, and to assist methodological experimentation. Reproducibility, and instantaneous repeatability, is built in to the ReproPhylo system and does not require user intervention or configuration because it stores the experimental workflow as a single, serialized Python object containing explicit provenance and environment information. This 'single file' approach ensures the persistence of provenance across iterations of the analysis, with changes automatically managed by the version control program Git. This file, along with a Git repository, are the primary reproducibility outputs of the program. In addition, ReproPhylo produces an extensive human-readable report and generates a comprehensive experimental archive file, both of which are suitable for submission with publications. The system facilitates thorough experimental exploration of both parameters and data. ReproPhylo is a platform independent CC0 Python module and is easily installed as a Docker image or a WinPython self-sufficient package, with a Jupyter Notebook GUI, or as a slimmer version in a Galaxy distribution.

  15. On the reproducibility of meta-analyses : six practical recommendations

    NARCIS (Netherlands)

    Lakens, D.; Hilgard, J.; Staaks, J.

    2016-01-01

    Meta-analyses play an important role in cumulative science by combining information across multiple studies and attempting to provide effect size estimates corrected for publication bias. Research on the reproducibility of meta-analyses reveals that errors are common, and the percentage of effect si

  16. ON APPROXIMATION BY SPHERICAL REPRODUCING KERNEL HILBERT SPACES

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The spherical approximation between two nested reproducing kernels Hilbert spaces generated from different smooth kernels is investigated. It is shown that the functions of a space can be approximated by that of the subspace with better smoothness. Furthermore, the upper bound of approximation error is given.

  17. The United States Today: An Atlas of Reproducible Pages.

    Science.gov (United States)

    World Eagle, Inc., Wellesley, MA.

    Black and white maps, graphs and tables that may be reproduced are presented in this volume focusing on the United States. Some of the features of the United States depicted are: size, population, agriculture and resources, manufactures, trade, citizenship, employment, income, poverty, the federal budget, energy, health, education, crime, and the…

  18. Reproducibility Issues : Avoiding Pitfalls in Animal Inflammation Models

    NARCIS (Netherlands)

    Laman, Jon D; Kooistra, Susanne M; Clausen, Björn E; Clausen, Björn E.; Laman, Jon D.

    2017-01-01

    In light of an enhanced awareness of ethical questions and ever increasing costs when working with animals in biomedical research, there is a dedicated and sometimes fierce debate concerning the (lack of) reproducibility of animal models and their relevance for human inflammatory diseases. Despite

  19. Modeling and evaluating repeatability and reproducibility of ordinal classifications

    NARCIS (Netherlands)

    J. de Mast; W.N. van Wieringen

    2010-01-01

    This paper argues that currently available methods for the assessment of the repeatability and reproducibility of ordinal classifications are not satisfactory. The paper aims to study whether we can modify a class of models from Item Response Theory, well established for the study of the reliability

  20. Collecting highly reproducible images to support dermatological medical diagnosis

    DEFF Research Database (Denmark)

    Gomez, David Delgado; Carstensen, Jens Michael; Ersbøll, Bjarne Kjær

    2006-01-01

    In this article, an integrated imaging system for acquisition of accurate standardized images is proposed. The system also aims at making highly reproducible images over time, so images taken at different times can be compared. The system is made up of an integrating intensity sphere illumination...

  1. Reproducibility of Manual Platelet Estimation Following Automated Low Platelet Counts

    Directory of Open Access Journals (Sweden)

    Zainab S Al-Hosni

    2016-11-01

    Full Text Available Objectives: Manual platelet estimation is one of the methods used when automated platelet estimates are very low. However, the reproducibility of manual platelet estimation has not been adequately studied. We sought to assess the reproducibility of manual platelet estimation following automated low platelet counts and to evaluate the impact of the level of experience of the person counting on the reproducibility of manual platelet estimates. Methods: In this cross-sectional study, peripheral blood films of patients with platelet counts less than 100 × 109/L were retrieved and given to four raters to perform manual platelet estimation independently using a predefined method (average of platelet counts in 10 fields using 100× objective multiplied by 20. Data were analyzed using intraclass correlation coefficient (ICC as a method of reproducibility assessment. Results: The ICC across the four raters was 0.840, indicating excellent agreement. The median difference of the two most experienced raters was 0 (range: -64 to 78. The level of platelet estimate by the least-experienced rater predicted the disagreement (p = 0.037. When assessing the difference between pairs of raters, there was no significant difference in the ICC (p = 0.420. Conclusions: The agreement between different raters using manual platelet estimation was excellent. Further confirmation is necessary, with a prospective study using a gold standard method of platelet counts.

  2. Calderon type reproducing formula on spaces of homogeneous type

    Institute of Scientific and Technical Information of China (English)

    邓东皋; 韩永生

    1995-01-01

    By using the Calderon-Zygmund operator theory, a continuous version of the Calderon type reproducing formula associated to a para-accretive function on spaces of homogeneous type is proved. A new characterization of the Besov and Triebel-Lizorkin spaces on spaces of homogeneous type is also obtained.

  3. Reproducibility of Tactile Assessments for Children with Unilateral Cerebral Palsy

    Science.gov (United States)

    Auld, Megan Louise; Ware, Robert S.; Boyd, Roslyn Nancy; Moseley, G. Lorimer; Johnston, Leanne Marie

    2012-01-01

    A systematic review identified tactile assessments used in children with cerebral palsy (CP), but their reproducibility is unknown. Sixteen children with unilateral CP and 31 typically developing children (TDC) were assessed 2-4 weeks apart. Test-retest percent agreements within one point for children with unilateral CP (and TDC) were…

  4. Reproducible and replicable CFD: it's harder than you think

    CERN Document Server

    Mesnard, Olivier

    2016-01-01

    Completing a full replication study of our previously published findings on bluff-body aerodynamics was harder than we thought. Despite the fact that we have good reproducible-research practices, sharing our code and data openly. Here's what we learned from three years, four CFD codes and hundreds of runs.

  5. Reproducibility of Tactile Assessments for Children with Unilateral Cerebral Palsy

    Science.gov (United States)

    Auld, Megan Louise; Ware, Robert S.; Boyd, Roslyn Nancy; Moseley, G. Lorimer; Johnston, Leanne Marie

    2012-01-01

    A systematic review identified tactile assessments used in children with cerebral palsy (CP), but their reproducibility is unknown. Sixteen children with unilateral CP and 31 typically developing children (TDC) were assessed 2-4 weeks apart. Test-retest percent agreements within one point for children with unilateral CP (and TDC) were…

  6. Timbral aspects of reproduced sound in small rooms. I

    DEFF Research Database (Denmark)

    Bech, Søren

    1995-01-01

    This paper reports some of the influences of individual reflections on the timbre of reproduced sound. A single loudspeaker with frequency-independent directivity characteristics, positioned in a listening room of normal size with frequency-independent absorption coefficients of the room surfaces...

  7. Scaled–up sonochemical microreactor with increased efficiency and reproducibility

    NARCIS (Netherlands)

    Verhaagen, Bram; Liu, Youlin; Galdames Perez, Andres; Castro-Hernandez, Elena; Fernandez Rivas, David

    2016-01-01

    Bubbles created with ultrasound from artificial microscopic crevices can improve energy efficiency values for the creation of radicals; nevertheless it has been conducted so far only under special laboratory conditions. Limited reproducibility of results and poor energy efficiency are constraints fo

  8. Exploring the Coming Repositories of Reproducible Experiments: Challenges and Opportunities

    DEFF Research Database (Denmark)

    Freire, Juliana; Bonnet, Philippe; Shasha, Dennis

    2011-01-01

    Computational reproducibility efforts in many communities will soon give rise to validated software and data repositories of high quality. A scientist in a field may want to query the components of such repositories to build new software workflows, perhaps after adding the scientist’s own algorithm...

  9. Reproducibility in density functional theory calculations of solids

    DEFF Research Database (Denmark)

    Lejaeghere, Kurt; Bihlmayer, Gustav; Björkman, Torbjörn

    2016-01-01

    The widespread popularity of density functional theory has given rise to an extensive range of dedicated codes for predicting molecular and crystalline properties. However, each code implements the formalism in a different way, raising questions about the reproducibility of such predictions. We r...

  10. Reproducibility of Electrical Caries Measurements : A Technical Problem?

    NARCIS (Netherlands)

    Huysmans, M. C. D. N. J. M.; Kühnisch, J.; Bosch, J. J. ten

    2005-01-01

    The currently available instrument for lectrical detection of occlusal caries lesions [Electronic Caries Monitor (ECM)] uses a site-specific measurement with co-axial air drying. The reproducibility of this method has been reported to be fair to good. It was noticed that the measurement variation of

  11. Reproducibility of electrical caries measurements : A technical problem?

    NARCIS (Netherlands)

    Huysmans, M.C.D.N.J.M.; Kuhnisch, J.; ten Bosch, J.

    2005-01-01

    The currently available instrument for electrical detection of occlusal caries lesions [Electronic Caries Monitor (ECM)] uses a site-specific measurement with co-axial air drying. The reproducibility of this method has been reported to be fair to good. It was noticed that the measurement variation

  12. Selecting participants for listening tests of multi-channel reproduced sound

    DEFF Research Database (Denmark)

    Wickelmaier, Florian; Choisel, Sylvain

    2005-01-01

    , and their verbal production abilities. The listeners displayed large individual differences in their performance. 40 subjects were selected based on the test results. The self-assessed listening habits and experience in the web questionnaire could not predict the results of the selection procedure. Further......A selection procedure was devised in order to select listeners for experiments in which their main task will be to judge multi-channel reproduced sound. 91 participants filled in a web-based questionnaire. 78 of them took part in an assessment of their hearing thresholds, their spatial hearing......, the hearing thresholds did not correlate with the spatial-hearing test. This leads to the conclusion that task-specific performance tests might be the preferable means of selecting a listening panel....

  13. Selecting participants for listening tests of multi-channel reproduced sound

    DEFF Research Database (Denmark)

    Wickelmaier, Florian Maria; Choisel, Sylvain

    2005-01-01

    , their spatial hearing, and their verbal production abilities. The listeners displayed large individual differences in their performance. Forty subjects were selected based on the test results. The self-assessed listening habits and experience in the web-questionnaire could not predict the results......A selection procedure was devised in order to select listeners for experiments in which their main task will be to judge multichannel reproduced sound. Ninety-one participants filled in a web-based questionnaire. Seventy-eight of them took part in an assessment of their hearing thresholds...... of the selection procedure. Further, the hearing thresholds did not correlate with the spatial-hearing test. This leads to the conclusion that task-specific performance tests might be the preferable means of selecting a listening panel....

  14. The variability of Sun-like stars: reproducing observed photometric trends

    CERN Document Server

    Shapiro, A I; Krivova, N A; Schmutz, W K; Ball, W T; Knaack, R; Rozanov, E V; Unruh, Y C

    2014-01-01

    The Sun and stars with low magnetic activity levels, become photometrically brighter when their activity increases. Magnetically more active stars display the opposite behaviour and get fainter when their activity increases. We reproduce the observed photometric trends in stellar variations with a model that treats stars as hypothetical Suns with coverage by magnetic features different from that of the Sun. The presented model attributes the variability of stellar spectra to the imbalance between the contributions from different components of the solar atmosphere, such as dark starspots and bright faculae. A stellar spectrum is calculated from spectra of the individual components, by weighting them with corresponding disc area coverages. The latter are obtained by extrapolating the solar dependences of spot and facular disc area coverages on chromospheric activity to stars with different levels of mean chromospheric activity. We have found that the contribution by starspots to the variability increases faster...

  15. Audiovisual biofeedback improves diaphragm motion reproducibility in MRI

    Science.gov (United States)

    Kim, Taeho; Pollock, Sean; Lee, Danny; O’Brien, Ricky; Keall, Paul

    2012-01-01

    Purpose: In lung radiotherapy, variations in cycle-to-cycle breathing results in four-dimensional computed tomography imaging artifacts, leading to inaccurate beam coverage and tumor targeting. In previous studies, the effect of audiovisual (AV) biofeedback on the external respiratory signal reproducibility has been investigated but the internal anatomy motion has not been fully studied. The aim of this study is to test the hypothesis that AV biofeedback improves diaphragm motion reproducibility of internal anatomy using magnetic resonance imaging (MRI). Methods: To test the hypothesis 15 healthy human subjects were enrolled in an ethics-approved AV biofeedback study consisting of two imaging sessions spaced ∼1 week apart. Within each session MR images were acquired under free breathing and AV biofeedback conditions. The respiratory signal to the AV biofeedback system utilized optical monitoring of an external marker placed on the abdomen. Synchronously, serial thoracic 2D MR images were obtained to measure the diaphragm motion using a fast gradient-recalled-echo MR pulse sequence in both coronal and sagittal planes. The improvement in the diaphragm motion reproducibility using the AV biofeedback system was quantified by comparing cycle-to-cycle variability in displacement, respiratory period, and baseline drift. Additionally, the variation in improvement between the two sessions was also quantified. Results: The average root mean square error (RMSE) of diaphragm cycle-to-cycle displacement was reduced from 2.6 mm with free breathing to 1.6 mm (38% reduction) with the implementation of AV biofeedback (p-value biofeedback (p-value biofeedback (p-value = 0.012). The diaphragm motion reproducibility improvements with AV biofeedback were consistent with the abdominal motion reproducibility that was observed from the external marker motion variation. Conclusions: This study was the first to investigate the potential of AV biofeedback to improve the motion

  16. A Synchrophasor Based Optimal Voltage Control Scheme with Successive Voltage Stability Margin Improvement

    Directory of Open Access Journals (Sweden)

    Heng-Yi Su

    2016-01-01

    Full Text Available This paper proposes an optimal control scheme based on a synchronized phasor (synchrophasor for power system secondary voltage control. The framework covers voltage stability monitoring and control. Specifically, a voltage stability margin estimation algorithm is developed and built in the newly designed adaptive secondary voltage control (ASVC method to achieve more reliable and efficient voltage regulation in power systems. This new approach is applied to improve voltage profile across the entire power grid by an optimized plan for VAR (reactive power sources allocation; therefore, voltage stability margin of a power system can be increased to reduce the risk of voltage collapse. An extensive simulation study on the IEEE 30-bus test system is carried out to demonstrate the feasibility and effectiveness of the proposed scheme.

  17. A linear auroral current-voltage relation in fluid theory

    Directory of Open Access Journals (Sweden)

    J. Vedin

    2004-04-01

    Full Text Available Progress in our understanding of auroral currents and auroral electron acceleration has for decades been hampered by an apparent incompatibility between kinetic and fluid models of the physics involved. A well established kinetic model predicts that steady upward field-aligned currents should be linearly related to the potential drop along the field line, but collisionless fluid models that reproduce this linear current-voltage relation have not been found. Using temperatures calculated from the kinetic model in the presence of an upward auroral current, we construct here approximants for the parallel and perpendicular temperatures. Although our model is rather simplified, we find that the fluid equations predict a realistic large-scale parallel electric field and a linear current-voltage relation when these approximants are employed as nonlocal equations of state. This suggests that the concepts we introduce can be applied to the development of accurate equations of state for fluid simulations of auroral flux tubes.

    Key words. Magnetospheric physics (auroral phenomena; magnetosphere-ionosphere interactions – Space plasma physics (kinetic and MHD theory

  18. Reproducibility of multifocal VEP latency using different stimulus presentations.

    Science.gov (United States)

    Sriram, Prema; Klistorner, Alexander; Arvind, Hemamalini; Graham, Stuart L

    2012-08-01

    The aims of the article were to study the reproducibility of latency of multifocal visual evoked potential (mfVEP) recorded using different stimulus presentations and to identify the peak with least variability. Ten normal subjects, aged between 22 and 52 years (mean age 32 ± 8.37 years), participated in the study. All subjects underwent mfVEP testing with pattern reversal and pattern pulse stimulus presentations. The stimulus subtends 26° from fixation and includes 24 segments. Only the vertical channel was recorded on all subjects. Testing was repeated after 1-2 weeks. Only the right eye of all subjects was analysed. Segments with low signal-to-noise ratios (SNR < 1.5) were excluded from analysis. The latencies were analysed to confirm values from the same peak for the two tests. The latency values were then analysed for the start of the response, the first peak and the second peak. The waveforms were reproducible throughout the field. Reproducibility of latency at the "start of the response" was significantly lesser than the first and the second peaks studied, while the reproducibility of latency at the first peak was not statistically different from the second peak for either pattern reversal or pattern pulse stimulation. The latency values were not different between the first and the second sessions for either pattern reversal or pattern pulse stimulation for any of the peaks. The pattern reversal stimulus presentation produced less variability in latency. The first peak is the most reproducible among the three measures in both the stimulus presentation.

  19. Reproducibility of anthropometric measurements in children: a longitudinal study.

    Science.gov (United States)

    Leppik, Aire; Jürimäe, Toivo; Jürimäe, Jaak

    2004-03-01

    The purpose of this study was to establish the reproducibility of a series of anthropometric measures performed twice during one week during a three year period in boys and girls. The subjects of this investigation were 39 children (21 boys and 18 girls), 9-10 year of age at the beginning of the study. Children were measured three times with one year interval. Children were classified by Tanner stage 1-2 during the first measurements, stage 1-3 during the second measurements and stage 1-4 during the third measurements. Body height and weight were measured and BMI calculated. All anthropometric parameters were measured according to the protocol recommended by the International Society for the Advancement of Kinanthropometry (Norton & Olds 1996). Nine skinfolds, 13 girths, eight lengths and eight breadths/lengths were measured. The reproducibility of body height (r = 0.995-0.999), body weight (r = 0.990-0.999) and BMI (r = 0.969-0.999) was very high in boys and girls. The intraclass correlations (ICC), technical errors (TE) and coefficients of variation (CV) were quite different depending on the measurement site of the skinfold thickness. It was surprising that the ICCs were highest and TEs and CVs were lowest during the second year of the measurement. The computed ICC was high, and TE and CV values were quite similar and relatively low in girth, length and breadth/length measurements. It was concluded that the reproducibility of girths, lengths and breadths/lengths in children is very high and the reproducibility of skinfolds is high. Specifically, the reproducibility is very high immediately before puberty in boys and girls.

  20. Computational see-through near-eye displays

    Science.gov (United States)

    Maimone, Andrew S.

    See-through near-eye displays with the form factor and field of view of eyeglasses are a natural choice for augmented reality systems: the non-encumbering size enables casual and extended use and large field of view enables general-purpose spatially registered applications. However, designing displays with these attributes is currently an open problem. Support for enhanced realism through mutual occlusion and the focal depth cues is also not found in eyeglasses-like displays. This dissertation provides a new strategy for eyeglasses-like displays that follows the principles of computational displays, devices that rely on software as a fundamental part of image formation. Such devices allow more hardware simplicity and flexibility, showing greater promise of meeting form factor and field of view goals while enhancing realism. This computational approach is realized in two novel and complementary see-through near-eye display designs. The first subtractive approach filters omnidirectional light through a set of optimized patterns displayed on a stack of spatial light modulators, reproducing a light field corresponding to in-focus imagery. The design is thin and scales to wide fields of view; see-through is achieved with transparent components placed directly in front of the eye. Preliminary support for focal cues and environment occlusion is also demonstrated. The second additive approach uses structured point light illumination to form an image with a minimal set of rays. Each of an array of defocused point light sources is modulated by a region of a spatial light modulator, essentially encoding an image in the focal blur. See-through is also achieved with transparent components and thin form factors and wide fields of view (>= 100 degrees) are demonstrated. The designs are examined in theoretical terms, in simulation, and through prototype hardware with public demonstrations. This analysis shows that the proposed computational near-eye display designs offer a

  1. Evaluation of the Voltage Support Strategies for the Low Voltage Grid Connected PV

    DEFF Research Database (Denmark)

    Demirok, Erhan; Sera, Dezso; Teodorescu, Remus

    2010-01-01

    PVs. In order to increase PV penetration level further, new voltage support control functions for individual inverters are required. This paper investigates distributed reactive power regulation and active power curtailment strategies regarding the development of PV connection capacity by evaluation......Admissible range of grid voltage is one of the strictest constraints for the penetration of distributed photovoltaic (PV) generators especially connection to low voltage (LV) public networks. Voltage limits are usually fulfilled either by network reinforcements or limiting of power injections from...

  2. Intra- and inter-radiation therapist reproducibility of daily isocenter verification using prostatic fiducial markers

    Directory of Open Access Journals (Sweden)

    Miller Robert W

    2006-02-01

    Full Text Available Abstract Background We sought to determine the intra- and inter-radiation therapist reproducibility of a previously established matching technique for daily verification and correction of isocenter position relative to intraprostatic fiducial markers (FM. Materials and methods With the patient in the treatment position, anterior-posterior and left lateral electronic images are acquired on an amorphous silicon flat panel electronic portal imaging device. After each portal image is acquired, the therapist manually translates and aligns the fiducial markers in the image to the marker contours on the digitally reconstructed radiograph. The distances between the planned and actual isocenter location is displayed. In order to determine the reproducibility of this technique, four therapists repeated and recorded this operation two separate times on 20 previously acquired portal image datasets from two patients. The data were analyzed to obtain the mean variability in the distances measured between and within observers. Results The mean and median intra-observer variability ranged from 0.4 to 0.7 mm and 0.3 to 0.6 mm respectively with a standard deviation of 0.4 to 1.0 mm. Inter-observer results were similar with a mean variability of 0.9 mm, a median of 0.6 mm, and a standard deviation of 0.7 mm. When using a 5 mm threshold, only 0.5% of treatments will undergo a table shift due to intra or inter-observer error, increasing to an error rate of 2.4% if this threshold were reduced to 3 mm. Conclusion We have found high reproducibility with a previously established method for daily verification and correction of isocenter position relative to prostatic fiducial markers using electronic portal imaging.

  3. Influence of current limitation on voltage stability with voltage sourced converter HVDC

    DEFF Research Database (Denmark)

    Zeni, Lorenzo; Jóhannsson, Hjörtur; Hansen, Anca Daniela;

    2013-01-01

    A first study of voltage stability with relevant amount of Voltage Sourced Converter based High Voltage Direct Current (VSC-HVDC) transmission is presented, with particular focus on the converters’ behaviour when reaching their rated current. The detrimental effect of entering the current...

  4. Voltage stability in low voltage microgrids in aspects of active and reactive power demand

    Directory of Open Access Journals (Sweden)

    Parol Mirosław

    2016-03-01

    Full Text Available Low voltage microgrids are autonomous subsystems, in which generation, storage and power and electrical energy consumption appear. In the paper the main attention has been paid to the voltage stability issue in low voltage microgrid for different variants of its operation. In the introduction a notion of microgrid has been presented, and also the issue of influence of active and reactive power balance on node voltage level has been described. Then description of voltage stability issue has been presented. The conditions of voltage stability and indicators used to determine voltage stability margin in the microgrid have been described. Description of the low voltage test microgrid, as well as research methodology along with definition of considered variants of its operation have been presented further. The results of exemplary calculations carried out for the daily changes in node load of the active and reactive power, i.e. the voltage and the voltage stability margin indexes in nodes have been presented. Furthermore, the changes of voltage stability margin indexes depending on the variant of the microgrid operation have been presented. Summary and formulation of conclusions related to the issue of voltage stability in microgrids have been included at the end of the paper.

  5. GridOrbit public display

    DEFF Research Database (Denmark)

    Ramos, Juan David Hincapie; Tabard, Aurélien; Bardram, Jakob

    2010-01-01

    We introduce GridOrbit, a public awareness display that visualizes the activity of a community grid used in a biology laboratory. This community grid executes bioin-formatics algorithms and relies on users to donate CPU cycles to the grid. The goal of GridOrbit is to create a shared awareness about...... the research taking place in the biology laboratory. This should promote contribu-tions to the grid, and thereby mediate the appropriation of the grid technology. GridOrbit visualizes the activity in the grid, shows information about the different active projects, and supports a messaging functionality where...... people comment on projects. Our work explores the usage of interactive technologies as enablers for the appropriation of an otherwise invisible infrastructure....

  6. Reduced Voltage Scaling in Clock Distribution Networks

    Directory of Open Access Journals (Sweden)

    Khader Mohammad

    2009-01-01

    Full Text Available We propose a novel circuit technique to generate a reduced voltage swing (RVS signals for active power reduction on main buses and clocks. This is achieved without performance degradation, without extra power supply requirement, and with minimum area overhead. The technique stops the discharge path on the net that is swinging low at a certain voltage value. It reduces active power on the target net by as much as 33% compared to traditional full swing signaling. The logic 0 voltage value is programmable through control bits. If desired, the reduced-swing mode can also be disabled. The approach assumes that the logic 0 voltage value is always less than the threshold voltage of the nMOS receivers, which eliminate the need of the low to high voltage translation. The reduced noise margin and the increased leakage on the receiver transistors using this approach have been addressed through the selective usage of multithreshold voltage (MTV devices and the programmability of the low voltage value.

  7. Low-Voltage Continuous Electrospinning Patterning.

    Science.gov (United States)

    Li, Xia; Li, Zhaoying; Wang, Liyun; Ma, Guokun; Meng, Fanlong; Pritchard, Robyn H; Gill, Elisabeth L; Liu, Ye; Huang, Yan Yan Shery

    2016-11-30

    Electrospinning is a versatile technique for the construction of microfibrous and nanofibrous structures with considerable potential in applications ranging from textile manufacturing to tissue engineering scaffolds. In the simplest form, electrospinning uses a high voltage of tens of thousands volts to draw out ultrafine polymer fibers over a large distance. However, the high voltage limits the flexible combination of material selection, deposition substrate, and control of patterns. Prior studies show that by performing electrospinning with a well-defined "near-field" condition, the operation voltage can be decreased to the kilovolt range, and further enable more precise patterning of fibril structures on a planar surface. In this work, by using solution dependent "initiators", we demonstrate a further lowering of voltage with an ultralow voltage continuous electrospinning patterning (LEP) technique, which reduces the applied voltage threshold to as low as 50 V, simultaneously permitting direct fiber patterning. The versatility of LEP is shown using a wide range of combination of polymer and solvent systems for thermoplastics and biopolymers. Novel functionalities are also incorporated when a low voltage mode is used in place of a high voltage mode, such as direct printing of living bacteria; the construction of suspended single fibers and membrane networks. The LEP technique reported here should open up new avenues in the patterning of bioelements and free-form nano- to microscale fibrous structures.

  8. Modeling and Simulation of Low Voltage Arcs

    NARCIS (Netherlands)

    Ghezzi, L.; Balestrero, A.

    2010-01-01

    Modeling and Simulation of Low Voltage Arcs is an attempt to improve the physical understanding, mathematical modeling and numerical simulation of the electric arcs that are found during current interruptions in low voltage circuit breakers. An empirical description is gained by refined electrical

  9. High-voltage engineering and testing

    CERN Document Server

    Ryan, Hugh M

    2013-01-01

    This 3rd edition of High Voltage Engineering Testing describes strategic developments in the field and reflects on how they can best be managed. All the key components of high voltage and distribution systems are covered including electric power networks, UHV and HV. Distribution systems including HVDC and power electronic systems are also considered.

  10. Modeling and Simulation of Low Voltage Arcs

    NARCIS (Netherlands)

    Ghezzi, L.; Balestrero, A.

    2010-01-01

    Modeling and Simulation of Low Voltage Arcs is an attempt to improve the physical understanding, mathematical modeling and numerical simulation of the electric arcs that are found during current interruptions in low voltage circuit breakers. An empirical description is gained by refined electrical m

  11. Simplified Night Sky Display System

    Science.gov (United States)

    Castellano, Timothy P.

    2010-01-01

    A document describes a simple night sky display system that is portable, lightweight, and includes, at most, four components in its simplest configuration. The total volume of this system is no more than 10(sup 6) cm(sup 3) in a disassembled state, and weighs no more than 20 kilograms. The four basic components are a computer, a projector, a spherical light-reflecting first surface and mount, and a spherical second surface for display. The computer has temporary or permanent memory that contains at least one signal representing one or more images of a portion of the sky when viewed from an arbitrary position, and at a selected time. The first surface reflector is spherical and receives and reflects the image from the projector onto the second surface, which is shaped like a hemisphere. This system may be used to simulate selected portions of the night sky, preserving the appearance and kinesthetic sense of the celestial sphere surrounding the Earth or any other point in space. These points will then show motions of planets, stars, galaxies, nebulae, and comets that are visible from that position. The images may be motionless, or move with the passage of time. The array of images presented, and vantage points in space, are limited only by the computer software that is available, or can be developed. An optional approach is to have the screen (second surface) self-inflate by means of gas within the enclosed volume, and then self-regulate that gas in order to support itself without any other mechanical support.

  12. Practical considerations in voltage stability assessment

    Energy Technology Data Exchange (ETDEWEB)

    Kundur, P.; Gao, B. [Powertech Labs. Inc., Surrey, BC (Canada)

    1994-12-31

    This paper deals with some of the most important practical issues related to voltage stability assessment of large practical systems. A brief discussion of the practical aspects of voltage stability problem and prevention of voltage instability is given first, followed by descriptions of different analytical techniques and tools for voltage stability analysis. Presentations of analytical tools is focused on the VSTAB program which incorporates the modal analysis, continuation power flow, and shortest distance to instability techniques, Finally, an example case study of a practical large system is presented. The case study illustrates how modal analysis is used to determine the most effective load shedding scheme for preventing voltage instability. (author) 15 refs., 2 figs., 2 tabs.

  13. Radiatively heated high voltage pyroelectric crystal pulser

    Energy Technology Data Exchange (ETDEWEB)

    Antolak, A.J., E-mail: antolak@sandia.gov [Sandia National Laboratories, Livermore, CA 94550 (United States); Chen, A.X. [Sandia National Laboratories, Livermore, CA 94550 (United States); Leung, K.-N. [Sandia National Laboratories, Livermore, CA 94550 (United States); Nuclear Engineering Department, University of California, Berkeley (United States); Morse, D.H.; Raber, T.N. [Sandia National Laboratories, Livermore, CA 94550 (United States)

    2014-01-21

    Thin lithium tantalate pyroelectric crystals in a multi-stage pulser were heated by quartz lamps during their charging phase to generate high voltage pulses. The charging voltage was determined empirically based on the measured breakdown voltage in air and verified by the induced breakdown voltage of an external high voltage power supply. A four-stage pyroelectric crystal device generated pulse discharges of up to 86 kV using both quartz lamps (radiative) and thermoelectric (conductive) heating. Approximately 50 mJ of electrical energy was harvested from the crystals when radiatively heated in air, and up to 720 mJ was produced when the crystals were submerged in a dielectric fluid. It is anticipated that joule-level pulse discharges could be obtained by employing additional stages and optimizing the heating configuration.

  14. Non-contact current and voltage sensor

    Science.gov (United States)

    Carpenter, Gary D; El-Essawy, Wael; Ferreira, Alexandre Peixoto; Keller, Thomas Walter; Rubio, Juan C; Schappert, Michael A

    2014-03-25

    A detachable current and voltage sensor provides an isolated and convenient device to measure current passing through a conductor such as an AC branch circuit wire, as well as providing an indication of an electrostatic potential on the wire, which can be used to indicate the phase of the voltage on the wire, and optionally a magnitude of the voltage. The device includes a housing that contains the current and voltage sensors, which may be a ferrite cylinder with a hall effect sensor disposed in a gap along the circumference to measure current, or alternative a winding provided through the cylinder along its axis and a capacitive plate or wire disposed adjacent to, or within, the ferrite cylinder to provide the indication of the voltage.

  15. Coordinated Voltage Control of Active Distribution Network

    Directory of Open Access Journals (Sweden)

    Xie Jiang

    2016-01-01

    Full Text Available This paper presents a centralized coordinated voltage control method for active distribution network to solve off-limit problem of voltage after incorporation of distributed generation (DG. The proposed method consists of two parts, it coordinated primal-dual interior point method-based voltage regulation schemes of DG reactive powers and capacitors with centralized on-load tap changer (OLTC controlling method which utilizes system’s maximum and minimum voltages, to improve the qualified rate of voltage and reduce the operation numbers of OLTC. The proposed coordination has considered the cost of capacitors. The method is tested using a radial edited IEEE-33 nodes distribution network which is modelled using MATLAB.

  16. A consistent approach to estimate the breakdown voltage of high voltage electrodes under positive switching impulses

    Science.gov (United States)

    Arevalo, L.; Wu, D.; Jacobson, B.

    2013-08-01

    The main propose of this paper is to present a physical model of long air gap electrical discharges under positive switching impulses. The development and progression of discharges in long air gaps are attributable to two intertwined physical phenomena, namely, the leader channel and the streamer zone. Experimental studies have been used to develop empirical and physical models capable to represent the streamer zone and the leader channel. The empirical ones have led to improvements in the electrical design of high voltage apparatus and insulation distances, but they cannot take into account factors associated with fundamental physics and/or the behavior of materials. The physical models have been used to describe and understand the discharge phenomena of laboratory and lightning discharges. However, because of the complex simulations necessary to reproduce real cases, they are not in widespread use in the engineering of practical applications. Hence, the aim of the work presented here is to develop a model based on physics of the discharge capable to validate and complement the existing engineering models. The model presented here proposes a new geometrical approximation for the representation of the streamer and the calculation of the accumulated electrical charge. The model considers a variable streamer region that changes with the temporal and spatial variations of the electric field. The leader channel is modeled using the non local thermo-equilibrium equations. Furthermore, statistical delays before the inception of the first corona, and random distributions to represent the tortuous nature of the path taken by the leader channel were included based on the behavior observed in experimental tests, with the intention of ensuring the discharge behaved in a realistic manner. For comparison purposes, two different gap configurations were simulated. A reasonable agreement was found between the physical model and the experimental test results.

  17. Reproducibility, interchangeability of measures, time to measure stabilization, and reference values of two tissue oximeters in healthy volunteers

    Science.gov (United States)

    Cournoyer, Alexis; Denault, André; Cossette, Sylvie; Fortier, Annik; Daoust, Raoul; Iseppon, Massimiliano; Chauny, Jean-Marc; Notebaert, Eric

    2016-09-01

    This study aimed to compare two tissue oximeters, the INVOS 5100c and the Equanox 7600, in terms of their reproducibility and the interchangeability of their measures. In a randomized order, three measurements were taken at six different sites on both sides of the body in 53 healthy volunteers. Intraclass correlation coefficients (ICC) and within-subject standard deviation (Sw) were calculated for each device. The ICCs were compared using Fisher r-to-z transformation and the Sw were compared using paired-sample t-tests. We found no difference between the reproducibility of the INVOS {ICC=0.92 [95% confidence interval (CI) 0.90 to 0.93]} and Equanox [ICC=0.90 (95% CI 0.88 to 0.93)] in terms of ICCs (p=0.06). However, the Equanox [Sw=1.96 (95% CI 1.91 to 2.02)] showed a better Sw than the INVOS [Sw=2.11 (95% CI 2.05 to 2.17)] (p=0.019). Also, when compared directly to stable condition, the readings produced by the two oximeters varied considerably [ICC 0.43 (95% CI 0.36 to 0.49)]. When taken individually, both tissue oximeters displayed good reproducibility, the Equanox being slightly better than the INVOS in terms of absolute reproducibility. However, when compared, the oximeters showed poor interdevices agreement. Reference values were also described.

  18. ProPath Display Process Overview

    Data.gov (United States)

    Department of Veterans Affairs — This API displays an overview of the process including the description, goals, associated roles (linked to their detailed information). It also displays all of the...

  19. Holographic Waveguided See-Through Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for lightweight, space suit-mounted displays, Luminit proposes a novel Holographic Waveguided See-Through Display. Our proposed Holographic...

  20. Projection/Reflection Heads-up Display

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for an EVA information display device, Physical Optics Corporation (POC) proposes to develop a new Projection/Reflection Heads-up Display...

  1. OZ: An Innovative Primary Flight Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed SBIR project will develop OZ, an innovative primary flight display for aircraft. The OZ display, designed from "first principles" of vision science,...

  2. MASSIVE DATA, THE DIGITIZATION OF SCIENCE, AND REPRODUCIBILITY OF RESULTS

    CERN Document Server

    CERN. Geneva

    2010-01-01

    As the scientific enterprise becomes increasingly computational and data-driven, the nature of the information communicated must change. Without inclusion of the code and data with published computational results, we are engendering a credibility crisis in science. Controversies such as ClimateGate, the microarray-based drug sensitivity clinical trials under investigation at Duke University, and retractions from prominent journals due to unverified code suggest the need for greater transparency in our computational science. In this talk I argue that the scientific method be restored to (1) a focus on error control as central to scientific communication and (2) complete communication of the underlying methodology producing the results, ie. reproducibility. I outline barriers to these goals based on recent survey work (Stodden 2010), and suggest solutions such as the “Reproducible Research Standard” (Stodden 2009), giving open licensing options designed to create an intellectual property framework for scien...

  3. Reproducing entanglement through local classical resources with no communication

    CERN Document Server

    Di Lorenzo, Antonio

    2011-01-01

    Entanglement is one of the most intriguing features of quantum mechanics. It gives rise to peculiar correlations which cannot be reproduced by a large class of alternative theories, the so-called hidden-variable models, that use parameters in addition to the wave-function. This incompatibility was quantified through the celebrated Bell inequalities, and more recently through new inequalities due to Leggett. Experiments confirm the predictions of quantum mechanics. However, this does not imply that quantum mechanics is the ultimate theory, unsusceptible of improvement, nor that quantum mechanics is essentially non-local. The theories ruled out by Bell and Leggett inequalities are required to satisfy some hypotheses, none of which is implied by locality alone. By dropping one or more hypotheses, it is possible not only to violate said inequalities, but to reproduce the quantum mechanical predictions altogether. So far, the models proposed were only mathematical constructs. In this paper we provide a classical r...

  4. Reproducibility Issues: Avoiding Pitfalls in Animal Inflammation Models.

    Science.gov (United States)

    Laman, Jon D; Kooistra, Susanne M; Clausen, Björn E

    2017-01-01

    In light of an enhanced awareness of ethical questions and ever increasing costs when working with animals in biomedical research, there is a dedicated and sometimes fierce debate concerning the (lack of) reproducibility of animal models and their relevance for human inflammatory diseases. Despite evident advancements in searching for alternatives, that is, replacing, reducing, and refining animal experiments-the three R's of Russel and Burch (1959)-understanding the complex interactions of the cells of the immune system, the nervous system and the affected tissue/organ during inflammation critically relies on in vivo models. Consequently, scientific advancement and ultimately novel therapeutic interventions depend on improving the reproducibility of animal inflammation models. As a prelude to the remaining hands-on protocols described in this volume, here, we summarize potential pitfalls of preclinical animal research and provide resources and background reading on how to avoid them.

  5. Properties of galaxies reproduced by a hydrodynamic simulation

    CERN Document Server

    Vogelsberger, Mark; Springel, Volker; Torrey, Paul; Sijacki, Debora; Xu, Dandan; Snyder, Gregory F; Bird, Simeon; Nelson, Dylan; Hernquist, Lars

    2014-01-01

    Previous simulations of the growth of cosmic structures have broadly reproduced the 'cosmic web' of galaxies that we see in the Universe, but failed to create a mixed population of elliptical and spiral galaxies due to numerical inaccuracies and incomplete physical models. Moreover, because of computational constraints, they were unable to track the small scale evolution of gas and stars to the present epoch within a representative portion of the Universe. Here we report a simulation that starts 12 million years after the Big Bang, and traces 13 billion years of cosmic evolution with 12 billion resolution elements in a volume of $(106.5\\,{\\rm Mpc})^3$. It yields a reasonable population of ellipticals and spirals, reproduces the distribution of galaxies in clusters and statistics of hydrogen on large scales, and at the same time the metal and hydrogen content of galaxies on small scales.

  6. Highly reproducible SERS arrays directly written by inkjet printing

    Science.gov (United States)

    Yang, Qiang; Deng, Mengmeng; Li, Huizeng; Li, Mingzhu; Zhang, Cong; Shen, Weizhi; Li, Yanan; Guo, Dan; Song, Yanlin

    2014-12-01

    SERS arrays with uniform gold nanoparticle distribution were fabricated by direct-writing with an inkjet printing method. Quantitative analysis based on Raman detection was achieved with a small standard statistical deviation of less than 4% for the reproducibility and less than 5% for the long-term stability for 12 weeks.SERS arrays with uniform gold nanoparticle distribution were fabricated by direct-writing with an inkjet printing method. Quantitative analysis based on Raman detection was achieved with a small standard statistical deviation of less than 4% for the reproducibility and less than 5% for the long-term stability for 12 weeks. Electronic supplementary information (ESI) available: Additional information on the experimental details, gold nanoparticle characterization, and theoretical calculation for the diameters of contact area of droplets on substrates with different contact angles. See DOI: 10.1039/c4nr04656k

  7. Reproducibility of Mammography Units, Film Processing and Quality Imaging

    Science.gov (United States)

    Gaona, Enrique

    2003-09-01

    The purpose of this study was to carry out an exploratory survey of the problems of quality control in mammography and processors units as a diagnosis of the current situation of mammography facilities. Measurements of reproducibility, optical density, optical difference and gamma index are included. Breast cancer is the most frequently diagnosed cancer and is the second leading cause of cancer death among women in the Mexican Republic. Mammography is a radiographic examination specially designed for detecting breast pathology. We found that the problems of reproducibility of AEC are smaller than the problems of processors units because almost all processors fall outside of the acceptable variation limits and they can affect the mammography quality image and the dose to breast. Only four mammography units agree with the minimum score established by ACR and FDA for the phantom image.

  8. Pressure stabilizer for reproducible picoinjection in droplet microfluidic systems.

    Science.gov (United States)

    Rhee, Minsoung; Light, Yooli K; Yilmaz, Suzan; Adams, Paul D; Saxena, Deepak; Meagher, Robert J; Singh, Anup K

    2014-12-07

    Picoinjection is a promising technique to add reagents into pre-formed emulsion droplets on chip however, it is sensitive to pressure fluctuation, making stable operation of the picoinjector challenging. We present a chip architecture using a simple pressure stabilizer for consistent and highly reproducible picoinjection in multi-step biochemical assays with droplets. Incorporation of the stabilizer immediately upstream of a picoinjector or a combination of injectors greatly reduces pressure fluctuations enabling reproducible and effective picoinjection in systems where the pressure varies actively during operation. We demonstrate the effectiveness of the pressure stabilizer for an integrated platform for on-demand encapsulation of bacterial cells followed by picoinjection of reagents for lysing the encapsulated cells. The pressure stabilizer was also used for picoinjection of multiple displacement amplification (MDA) reagents to achieve genomic DNA amplification of lysed bacterial cells.

  9. GMR biosensor arrays: correction techniques for reproducibility and enhanced sensitivity.

    Science.gov (United States)

    Hall, D A; Gaster, R S; Osterfeld, S J; Murmann, B; Wang, S X

    2010-05-15

    Giant magnetoresistive biosensors possess great potential in biomedical applications for quantitatively detecting magnetically tagged biomolecules. Magnetic sensing does not suffer from the high background levels found in optical sensing modalities such as the enzyme linked immunosorbent assay translating into a technology with higher sensitivity. However, to reveal the full potential of these sensors and compensate for non-idealities such as temperature dependence, digital correction and calibration techniques are not only useful but imperative. Using these calibration techniques to correct for process variations and dynamic changes in the sensing environment (such as temperature and magnetic field), we are able to obtain extremely sensitive and, more importantly, reproducible results for quantifiable biomolecular reorganization. The reproducibility of the system was improved by over 3 x using digital correction techniques and the sensors are made temperature independent by using a novel background correction technique. 2010 Elsevier B.V. All rights reserved.

  10. Towards reproducibility of research by reuse of IT best practices

    CERN Document Server

    CERN. Geneva

    2013-01-01

    Reproducibility of any research gives much higher credibility both to research results and to the researchers. This is true for any kind of research including computer science, where a lot of tools and approaches have been developed to ensure reproducibility. In this talk I will focus on basic and seemingly simple principles, which sometimes look too obvious to follow, but help researchers build beautiful and reliable systems that produce consistent, measurable results. My talk will cover, among other things, the problem of embedding machine learning techniques into analysis strategy. I will also speak about the most common pitfalls in this process and how to avoid them. In addition, I will demonstrate the research environment based on the principles that I will have outlined. About the speaker Andrey Ustyuzhanin (36) is Head of CERN partnership program at Yandex. He is involved in the development of event indexing and event filtering services which Yandex has been providing for the LHCb experiment sinc...

  11. Reproducible Ultrahigh Electromagnetic SERS Enhancement in Nanosphere-Plane Junctions

    CERN Document Server

    Long, Jing; Li, Hongquan; Yang, Tian

    2015-01-01

    Surface enhanced Raman scattering (SERS) in nanoscale hotspots has been placed great hopes upon for identification of minimum chemical traces and in-situ investigation of single molecule structures and dynamics. However, previous work consists of either irreproducible enhancement factors (EF) from random aggregates, or moderate EFs despite better reproducibility. Consequently, systematic study of SERS at the single and few molecules level is still very limited, and the promised applications are far from being realized. Here we report EFs as high as the most intense hotspots in previous work yet achieved in a reproducible and well controlled manner, that is, electromagnetic EFs (EMEF) of 10^9~10 with an error down to 10^+/-0.08 from gold nanospheres on atomically flat gold planes under radially polarized (RP) laser excitation. In addition, our experiment reveals the EF's unexpected nonlinearity under as low as hundreds of nanowatts of laser power.

  12. Facebook and the Fun of Drinking Photos: Reproducing Gendered Regimes of Power

    Directory of Open Access Journals (Sweden)

    Antonia C. Lyons

    2016-10-01

    Full Text Available Young adults regularly engage in heavy drinking episodes with friends and share these practices via digital images and ongoing interactions on social media. This study explored the meanings and values that young adults attach to Facebook social media photo-sharing practices around drinking and socializing, and how these practices were gendered, in what ways, and with what effects. We conducted 24 friendship discussion groups (64 females, 41 males and 15 individual interviews (10 females, 5 males in which participants showed and discussed their (screen-recorded Facebook pages. Analyses demonstrated that drinking photos facilitated valued forms of sociality, visibility, and popularity for all participants, but the labor involved in preparing for, taking, selecting, uploading, tagging, and untagging drinking photos was heavily gendered. The tensions inherent in performing femininity within the “culture of intoxication” meant that young women engaged more intensively with photographic activities related to online self-displays. Although young men have (and engage with many drinking photos on their Facebook pages, they derided routine and excessive photo-taking and uploading activities, particularly practices around self-imaging/posing, as trivial, silly, and inherently feminine. Sharing drinking images online provides a site of pleasure, leisure, and self-display for both men and women, but was more complex and challenging for young women who are performing identities in a patriarchal, heteronormative, postfeminist, and commercially driven digital environment. The technological practices involved in producing online drinking photos reproduce regimes of gendered power.

  13. Effective Reproducible Research with Org-Mode and Git

    OpenAIRE

    Stanisic, Luka; Legrand, Arnaud

    2014-01-01

    International audience; In this article we address the question of developing a lightweight and effective workflow for conducting experimental research on modern parallel computer systems in a reproducible way. Our workflowsimply builds on two well-known tools (Org-mode and Git) and enablesto address issues such as provenance tracking, experimental setup reconstruction, replicable analysis. Although this workflow is perfectible and cannot be seen as a final solution, we have been usingit for ...

  14. Bounded symbols and reproducing kernel thesis for truncated Toeplitz operators

    CERN Document Server

    Baranov, A; Fricain, Emmanuel; Mashreghi, Javad; Timotin, Dan

    2009-01-01

    Compressions of Toeplitz operators to coinvariant subspaces of $H^2$ are called \\emph{truncated Toeplitz operators}. We study two questions related to these operators. The first, raised by Sarason, is whether boundedness of the operator implies the existence of a bounded symbol; the second is the reproducing kernel thesis. We show that in general the answer to the first question is negative, and we exhibit some classes of spaces for which the answers to both questions are positive.

  15. How reproducible are the measurements of leaf fluctuating asymmetry?

    Directory of Open Access Journals (Sweden)

    Mikhail V. Kozlov

    2015-06-01

    Full Text Available Fluctuating asymmetry (FA represents small, non-directional deviations from perfect symmetry in morphological characters. FA is generally assumed to increase in response to stress; therefore, FA is frequently used in ecological studies as an index of environmental or genetic stress experienced by an organism. The values of FA are usually small, and therefore the reliable detection of FA requires precise measurements. The reproducibility of fluctuating asymmetry (FA was explored by comparing the results of measurements of scanned images of 100 leaves of downy birch (Betula pubescens conducted by 31 volunteer scientists experienced in studying plant FA. The median values of FA varied significantly among the participants, from 0.000 to 0.074, and the coefficients of variation in FA for individual leaves ranged from 25% to 179%. The overall reproducibility of the results among the participants was rather low (0.074. Variation in instruments and methods used by the participants had little effect on the reported FA values, but the reproducibility of the measurements increased by 30% following exclusion of data provided by seven participants who had modified the suggested protocol for leaf measurements. The scientists working with plant FA are advised to pay utmost attention to adequate and detailed description of their data acquisition protocols in their forthcoming publications, because all characteristics of instruments and methods need to be controlled to increase the quality and reproducibility of the data. Whenever possible, the images of all measured objects and the results of primary measurements should be published as electronic appendices to scientific papers.

  16. Reproducing Kernel Method for Fractional Riccati Differential Equations

    Directory of Open Access Journals (Sweden)

    X. Y. Li

    2014-01-01

    Full Text Available This paper is devoted to a new numerical method for fractional Riccati differential equations. The method combines the reproducing kernel method and the quasilinearization technique. Its main advantage is that it can produce good approximations in a larger interval, rather than a local vicinity of the initial position. Numerical results are compared with some existing methods to show the accuracy and effectiveness of the present method.

  17. Reproducibility of urinary biomarkers in multiple 24-h urine samples.

    Science.gov (United States)

    Sun, Qi; Bertrand, Kimberly A; Franke, Adrian A; Rosner, Bernard; Curhan, Gary C; Willett, Walter C

    2017-01-01

    Limited knowledge regarding the reproducibility of biomarkers in 24-h urine samples has hindered the collection and use of the samples in epidemiologic studies. We aimed to evaluate the reproducibility of various markers in repeat 24-h urine samples. We calculated intraclass correlation coefficients (ICCs) of biomarkers measured in 24-h urine samples that were collected in 3168 participants in the NHS (Nurses' Health Study), NHSII (Nurses' Health Study II), and Health Professionals Follow-Up Study. In 742 women with 4 samples each collected over the course of 1 y, ICCs for sodium were 0.32 in the NHS and 0.34 in the NHSII. In 2439 men and women with 2 samples each collected over 1 wk to ≥1 mo, the ICCs ranged from 0.33 to 0.68 for sodium at various intervals between collections. The urinary excretion of potassium, calcium, magnesium, phosphate, sulfate, and other urinary markers showed generally higher reproducibility (ICCs >0.4). In 47 women with two 24-h urine samples, ICCs ranged from 0.15 (catechin) to 0.75 (enterolactone) for polyphenol metabolites. For phthalates, ICCs were generally ≤0.26 except for monobenzyl phthalate (ICC: 0.55), whereas the ICC was 0.39 for bisphenol A (BPA). We further estimated that, for the large majority of the biomarkers, the mean of three 24-h urine samples could provide a correlation of ≥0.8 with true long-term urinary excretion. These data suggest that the urinary excretion of various biomarkers, such as minerals, electrolytes, most polyphenols, and BPA, is reasonably reproducible in 24-h urine samples that are collected within a few days or ≤1 y. Our findings show that three 24-h samples are sufficient for the measurement of long-term exposure status in epidemiologic studies. © 2017 American Society for Nutrition.

  18. Reproducibility in density functional theory calculations of solids

    OpenAIRE

    2016-01-01

    This is the author accepted manuscript.The final version is available from the American Association for the Advancement of Science via http://dx.doi.org/10.1126/science.aad3000 The widespread popularity of density-functional theory has given rise to a vast range of dedicated codes to predict molecular and crystalline properties. However, each code implements the formalism in a different way, raising questions on the reproducibility of such predictions. We report the results of a community-...

  19. Pressure Stabilizer for Reproducible Picoinjection in Droplet Microfluidic Systems

    OpenAIRE

    Rhee, Minsoung; Light, Yooli K.; Yilmaz, Suzan; Adams, Paul D.; Saxena, Deepak; Meagher, Robert J.; Singh, Anup K.

    2014-01-01

    Picoinjection is a promising technique to add reagents into pre-formed emulsion droplets on chip; however, it is sensitive to pressure fluctuation, making stable operation of the picoinjector challenging. We present a chip architecture using a simple pressure stabilizer for consistent and highly reproducible picoinjection in multi-step biochemical assays with droplets. Incorporation of the stabilizer immediately upstream of a picoinjector or a combination of injectors greatly reduces pressure...

  20. Toner Display Based on Movement of Tribo-electrically Charged Particles

    Institute of Scientific and Technical Information of China (English)

    Takashi Kitamura

    2004-01-01

    The mechanism of toner display based on an electrical movement of black and white charged particles has been investigated. Two kinds of particles of black and white charged in the different electric polarity are enclosed in two ITO transparent electrodes using an insulating spacer. The particle movement is controlled by the external electric field applied between two transparent electrodes. The black toner is adhered on the electrode by an electrostatic force across the CTL to display a black image. The toners can be put back to the counter electrode by applying a reverse electric field, and a white image is formed. The black and white solid images are displayed by the switch of polarity of applied voltage in toner display cell. The polarity of charge and the value of charge to mass ratio of two particles were measured by observation of the particle separation on the surface-type electrodes and using q/m meter, respectively.

  1. The Reproducibility of Nuclear Morphometric Measurements in Invasive Breast Carcinoma

    Directory of Open Access Journals (Sweden)

    Pauliina Kronqvist

    1997-01-01

    Full Text Available The intraobserver and interobserver reproducibility of computerized nuclear morphometry was determined in repeated measurements of 212 samples of invasive breast cancer. The influence of biological variation and the selection of the measurement area was also tested. Morphometrically determined mean nuclear profile area (Pearson’s r 0.89, grading efficiency (GE 0.95 and standard deviation (SD of nuclear profile area (Pearson’s r 0.84, GE 0.89 showed high reproducibility. In this respect, nuclear morphometry equals with other established methods of quantitative pathology and exceeds the results of subjective grading of nuclear atypia in invasive breast cancer. A training period of eight days was sufficient to produce clear improvement in consistency of nuclear morphometry results. By estimating the sources of variation it could be shown that the variation associated with the measurement procedure itself is small. Instead, sample associated variation is responsible for the majority of variation in the measurements (82.9% in mean nuclear profile area and 65.9% in SD of nuclear profile area. This study points out that when standardized methods are applied computerized morphometry is a reproducible and reliable method of assessing nuclear atypia in invasive breast cancer. For further improvement special emphasize should be put on sampling rules of selecting the microscope fields and measurement areas.

  2. CRKSPH - A Conservative Reproducing Kernel Smoothed Particle Hydrodynamics Scheme

    Science.gov (United States)

    Frontiere, Nicholas; Raskin, Cody D.; Owen, J. Michael

    2017-03-01

    We present a formulation of smoothed particle hydrodynamics (SPH) that utilizes a first-order consistent reproducing kernel, a smoothing function that exactly interpolates linear fields with particle tracers. Previous formulations using reproducing kernel (RK) interpolation have had difficulties maintaining conservation of momentum due to the fact the RK kernels are not, in general, spatially symmetric. Here, we utilize a reformulation of the fluid equations such that mass, linear momentum, and energy are all rigorously conserved without any assumption about kernel symmetries, while additionally maintaining approximate angular momentum conservation. Our approach starts from a rigorously consistent interpolation theory, where we derive the evolution equations to enforce the appropriate conservation properties, at the sacrifice of full consistency in the momentum equation. Additionally, by exploiting the increased accuracy of the RK method's gradient, we formulate a simple limiter for the artificial viscosity that reduces the excess diffusion normally incurred by the ordinary SPH artificial viscosity. Collectively, we call our suite of modifications to the traditional SPH scheme Conservative Reproducing Kernel SPH, or CRKSPH. CRKSPH retains many benefits of traditional SPH methods (such as preserving Galilean invariance and manifest conservation of mass, momentum, and energy) while improving on many of the shortcomings of SPH, particularly the overly aggressive artificial viscosity and zeroth-order inaccuracy. We compare CRKSPH to two different modern SPH formulations (pressure based SPH and compatibly differenced SPH), demonstrating the advantages of our new formulation when modeling fluid mixing, strong shock, and adiabatic phenomena.

  3. Validity and reproducibility of a Spanish dietary history.

    Directory of Open Access Journals (Sweden)

    Pilar Guallar-Castillón

    Full Text Available OBJECTIVE: To assess the validity and reproducibility of food and nutrient intake estimated with the electronic diet history of ENRICA (DH-E, which collects information on numerous aspects of the Spanish diet. METHODS: The validity of food and nutrient intake was estimated using Pearson correlation coefficients between the DH-E and the mean of seven 24-hour recalls collected every 2 months over the previous year. The reproducibility was estimated using intraclass correlation coefficients between two DH-E made one year apart. RESULTS: The correlations coefficients between the DH-E and the mean of seven 24-hour recalls for the main food groups were cereals (r = 0.66, meat (r = 0.66, fish (r = 0.42, vegetables (r = 0.62 and fruits (r = 0.44. The mean correlation coefficient for all 15 food groups considered was 0.53. The correlations for macronutrients were: energy (r = 0.76, proteins (r= 0.58, lipids (r = 0.73, saturated fat (r = 0.73, monounsaturated fat (r = 0.59, polyunsaturated fat (r = 0.57, and carbohydrates (r = 0.66. The mean correlation coefficient for all 41 nutrients studied was 0.55. The intraclass correlation coefficient between the two DH-E was greater than 0.40 for most foods and nutrients. CONCLUSIONS: The DH-E shows good validity and reproducibility for estimating usual intake of foods and nutrients.

  4. Dosimetric Algorithm to Reproduce Isodose Curves Obtained from a LINAC

    Science.gov (United States)

    Estrada Espinosa, Julio Cesar; Martínez Ovalle, Segundo Agustín; Pereira Benavides, Cinthia Kotzian

    2014-01-01

    In this work isodose curves are obtained by the use of a new dosimetric algorithm using numerical data from percentage depth dose (PDD) and the maximum absorbed dose profile, calculated by Monte Carlo in a 18 MV LINAC. The software allows reproducing the absorbed dose percentage in the whole irradiated volume quickly and with a good approximation. To validate results an 18 MV LINAC with a whole geometry and a water phantom were constructed. On this construction, the distinct simulations were processed by the MCNPX code and then obtained the PDD and profiles for the whole depths of the radiation beam. The results data were used by the code to produce the dose percentages in any point of the irradiated volume. The absorbed dose for any voxel's size was also reproduced at any point of the irradiated volume, even when the voxels are considered to be of a pixel's size. The dosimetric algorithm is able to reproduce the absorbed dose induced by a radiation beam over a water phantom, considering PDD and profiles, whose maximum percent value is in the build-up region. Calculation time for the algorithm is only a few seconds, compared with the days taken when it is carried out by Monte Carlo. PMID:25045398

  5. Reproducibility of LCA models of crude oil production.

    Science.gov (United States)

    Vafi, Kourosh; Brandt, Adam R

    2014-11-04

    Scientific models are ideally reproducible, with results that converge despite varying methods. In practice, divergence between models often remains due to varied assumptions, incompleteness, or simply because of avoidable flaws. We examine LCA greenhouse gas (GHG) emissions models to test the reproducibility of their estimates for well-to-refinery inlet gate (WTR) GHG emissions. We use the Oil Production Greenhouse gas Emissions Estimator (OPGEE), an open source engineering-based life cycle assessment (LCA) model, as the reference model for this analysis. We study seven previous studies based on six models. We examine the reproducibility of prior results by successive experiments that align model assumptions and boundaries. The root-mean-square error (RMSE) between results varies between ∼1 and 8 g CO2 eq/MJ LHV when model inputs are not aligned. After model alignment, RMSE generally decreases only slightly. The proprietary nature of some of the models hinders explanations for divergence between the results. Because verification of the results of LCA GHG emissions is often not possible by direct measurement, we recommend the development of open source models for use in energy policy. Such practice will lead to iterative scientific review, improvement of models, and more reliable understanding of emissions.

  6. Mechanostructure and composition of highly reproducible decellularized liver matrices.

    Science.gov (United States)

    Mattei, G; Di Patria, V; Tirella, A; Alaimo, A; Elia, G; Corti, A; Paolicchi, A; Ahluwalia, A

    2014-02-01

    Despite the increasing number of papers on decellularized scaffolds, there is little consensus on the optimum method of decellularizing biological tissue such that the micro-architecture and protein content of the matrix are conserved as far as possible. Focusing on the liver, the aim of this study was therefore to develop a method for the production of well-characterized and reproducible matrices that best preserves the structure and composition of the native extra cellular matrix (ECM). Given the importance of matrix stiffness in regulating cell response, the mechanical properties of the decellularized tissue were also considered. The testing and analysis framework is based on the characterization of decellularized and untreated samples in the same reproducible initial state (i.e., the equilibrium swollen state). Decellularized ECM (dECM) were characterized using biochemical, histological, mechanical and structural analyses to identify the best procedure to ensure complete cell removal while preserving most of the native ECM structure and composition. Using this method, sterile decellularized porcine ECM with highly conserved intra-lobular micro-structure and protein content were obtained in a consistent and reproducible manner using the equilibrium swollen state of tissue or matrix as a reference. A significant reduction in the compressive elastic modulus was observed for liver dECM with respect to native tissue, suggesting a re-examination of design parameters for ECM-mimicking scaffolds for engineering tissues in vitro.

  7. Indomethacin reproducibly induces metamorphosis in Cassiopea xamachana scyphistomae

    Science.gov (United States)

    Cabrales-Arellano, Patricia; Islas-Flores, Tania; Thomé, Patricia E.

    2017-01-01

    Cassiopea xamachana jellyfish are an attractive model system to study metamorphosis and/or cnidarian–dinoflagellate symbiosis due to the ease of cultivation of their planula larvae and scyphistomae through their asexual cycle, in which the latter can bud new larvae and continue the cycle without differentiation into ephyrae. Then, a subsequent induction of metamorphosis and full differentiation into ephyrae is believed to occur when the symbionts are acquired by the scyphistomae. Although strobilation induction and differentiation into ephyrae can be accomplished in various ways, a controlled, reproducible metamorphosis induction has not been reported. Such controlled metamorphosis induction is necessary for an ensured synchronicity and reproducibility of biological, biochemical, and molecular analyses. For this purpose, we tested if differentiation could be pharmacologically stimulated as in Aurelia aurita, by the metamorphic inducers thyroxine, KI, NaI, Lugol’s iodine, H2O2, indomethacin, or retinol. We found reproducibly induced strobilation by 50 μM indomethacin after six days of exposure, and 10–25 μM after 7 days. Strobilation under optimal conditions reached 80–100% with subsequent ephyrae release after exposure. Thyroxine yielded inconsistent results as it caused strobilation occasionally, while all other chemicals had no effect. Thus, indomethacin can be used as a convenient tool for assessment of biological phenomena through a controlled metamorphic process in C. xamachana scyphistomae. PMID:28265497

  8. Representativity and reproducibility of DNA malignancy grading in different carcinomas.

    Science.gov (United States)

    Böcking, A; Chatelain, R; Homge, M; Daniel, R; Gillissen, A; Wohltmann, D

    1989-04-01

    The reproducibility of the determination of the "DNA malignancy grade" (DNA-MG) was tested in 56 carcinomas of the colon, breast and lung while its representativity was tested on 195 slides from 65 tumors of the colon, breast and lung. DNA measurements were performed on Feulgen-stained smears with the TAS Plus TV-based image analysis system combined with an automated microscope. The variance of the DNA values of tumor cells around the 2c peak, the "2c deviation index" (2cDI), was taken as a basis for the computation of the DNA-MG, which ranges on a continuous scale from 0.01 to 3.00. The representativity, analyzed by comparison of the DNA-MGs measured in three different areas of the same tumor greater than or equal to 1.5 cm apart from each other, yielded an 81% agreement. No significant differences between DNA-MGs of these areas were found. The intraobserver and interobserver reproducibilities of the DNA grading system, investigated by repeated DNA measurements, were 83.9% and 82.2%, respectively. In comparison, histopathologic grading of the 27 breast cancers studied yielded 65% intraobserver and 57% interobserver reproducibilities and 66% representativity.

  9. Establishing a reproducible protocol for measuring index active extension strength.

    Science.gov (United States)

    Matter-Parrat, V; Hidalgo Diaz, J J; Collon, S; Salazar Botero, S; Prunières, G; Ichihara, S; Facca, S; Liverneaux, P

    2017-02-01

    The goal of this study was to establish a reproducible protocol to measure active extension strength in the index finger. The secondary objectives consisted in correlating the independent or associated index extension strength to the other fingers force of contraction of the extensor indicis propius with hand dominance. The population studied consisted of 24 healthy volunteers, including 19 women and 20 right-handed individuals. The independent and dependent index extension strength in each hand was measured three times with a dynamometer by three examiners at Day 0 and again at Day 7. Intra and inter-examiner reproducibility were, respectively, >0.90 and >0.75 in all cases. The independent extension strength was lower than the dependent one. There was no difference between the independent index extension strength on the dominant and non-dominant sides. The same was true for the dependent strength. Our results show that our protocol is reproducible in measuring independent and dependent index extension strength. Dominance did not come into account.

  10. Dosimetric algorithm to reproduce isodose curves obtained from a LINAC.

    Science.gov (United States)

    Estrada Espinosa, Julio Cesar; Martínez Ovalle, Segundo Agustín; Pereira Benavides, Cinthia Kotzian

    2014-01-01

    In this work isodose curves are obtained by the use of a new dosimetric algorithm using numerical data from percentage depth dose (PDD) and the maximum absorbed dose profile, calculated by Monte Carlo in a 18 MV LINAC. The software allows reproducing the absorbed dose percentage in the whole irradiated volume quickly and with a good approximation. To validate results an 18 MV LINAC with a whole geometry and a water phantom were constructed. On this construction, the distinct simulations were processed by the MCNPX code and then obtained the PDD and profiles for the whole depths of the radiation beam. The results data were used by the code to produce the dose percentages in any point of the irradiated volume. The absorbed dose for any voxel's size was also reproduced at any point of the irradiated volume, even when the voxels are considered to be of a pixel's size. The dosimetric algorithm is able to reproduce the absorbed dose induced by a radiation beam over a water phantom, considering PDD and profiles, whose maximum percent value is in the build-up region. Calculation time for the algorithm is only a few seconds, compared with the days taken when it is carried out by Monte Carlo.

  11. Dosimetric Algorithm to Reproduce Isodose Curves Obtained from a LINAC

    Directory of Open Access Journals (Sweden)

    Julio Cesar Estrada Espinosa

    2014-01-01

    Full Text Available In this work isodose curves are obtained by the use of a new dosimetric algorithm using numerical data from percentage depth dose (PDD and the maximum absorbed dose profile, calculated by Monte Carlo in a 18 MV LINAC. The software allows reproducing the absorbed dose percentage in the whole irradiated volume quickly and with a good approximation. To validate results an 18 MV LINAC with a whole geometry and a water phantom were constructed. On this construction, the distinct simulations were processed by the MCNPX code and then obtained the PDD and profiles for the whole depths of the radiation beam. The results data were used by the code to produce the dose percentages in any point of the irradiated volume. The absorbed dose for any voxel’s size was also reproduced at any point of the irradiated volume, even when the voxels are considered to be of a pixel’s size. The dosimetric algorithm is able to reproduce the absorbed dose induced by a radiation beam over a water phantom, considering PDD and profiles, whose maximum percent value is in the build-up region. Calculation time for the algorithm is only a few seconds, compared with the days taken when it is carried out by Monte Carlo.

  12. Reproducibility of gene expression across generations of Affymetrix microarrays

    Directory of Open Access Journals (Sweden)

    Haslett Judith N

    2003-06-01

    Full Text Available Abstract Background The development of large-scale gene expression profiling technologies is rapidly changing the norms of biological investigation. But the rapid pace of change itself presents challenges. Commercial microarrays are regularly modified to incorporate new genes and improved target sequences. Although the ability to compare datasets across generations is crucial for any long-term research project, to date no means to allow such comparisons have been developed. In this study the reproducibility of gene expression levels across two generations of Affymetrix GeneChips® (HuGeneFL and HG-U95A was measured. Results Correlation coefficients were computed for gene expression values across chip generations based on different measures of similarity. Comparing the absolute calls assigned to the individual probe sets across the generations found them to be largely unchanged. Conclusion We show that experimental replicates are highly reproducible, but that reproducibility across generations depends on the degree of similarity of the probe sets and the expression level of the corresponding transcript.

  13. Indomethacin reproducibly induces metamorphosis in Cassiopea xamachana scyphistomae

    Directory of Open Access Journals (Sweden)

    Patricia Cabrales-Arellano

    2017-03-01

    Full Text Available Cassiopea xamachana jellyfish are an attractive model system to study metamorphosis and/or cnidarian–dinoflagellate symbiosis due to the ease of cultivation of their planula larvae and scyphistomae through their asexual cycle, in which the latter can bud new larvae and continue the cycle without differentiation into ephyrae. Then, a subsequent induction of metamorphosis and full differentiation into ephyrae is believed to occur when the symbionts are acquired by the scyphistomae. Although strobilation induction and differentiation into ephyrae can be accomplished in various ways, a controlled, reproducible metamorphosis induction has not been reported. Such controlled metamorphosis induction is necessary for an ensured synchronicity and reproducibility of biological, biochemical, and molecular analyses. For this purpose, we tested if differentiation could be pharmacologically stimulated as in Aurelia aurita, by the metamorphic inducers thyroxine, KI, NaI, Lugol’s iodine, H2O2, indomethacin, or retinol. We found reproducibly induced strobilation by 50 μM indomethacin after six days of exposure, and 10–25 μM after 7 days. Strobilation under optimal conditions reached 80–100% with subsequent ephyrae release after exposure. Thyroxine yielded inconsistent results as it caused strobilation occasionally, while all other chemicals had no effect. Thus, indomethacin can be used as a convenient tool for assessment of biological phenomena through a controlled metamorphic process in C. xamachana scyphistomae.

  14. Emerging Large-Screen Display Technology

    Science.gov (United States)

    1992-11-01

    1255, Santa Clara, CA. 25. Williams, R. D., and F. Garcia, 1988, "A Real Time Autostereoscopic Multiplanar 3D Display System," Society for Information...K. Miyaji, 1989, " 3D Display using Laser and Moving Screen, Japan Display 1989, Paper P3-5. 27. Sterling, R. D., R. D. TeKolste, J. M. Haggerty, T. C

  15. Liquid crystal displays for aircraft engineering

    Directory of Open Access Journals (Sweden)

    Kovalenko L. F.

    2009-06-01

    Full Text Available Operating conditions for liquid-crystal displays of aircraft instruments have been examined. Requirements to engineering of a liquid-crystal display for operation in severe environment have been formulated. The implementation options for liquid-crystal matrix illumination have been analyzed in order to ensure the sufficient brightness depending on external illumination of a display screen.

  16. Microfluidics for electronic paper-like displays

    NARCIS (Netherlands)

    Shui, Lingling; Hayes, Robert A.; Jin, Mingliang; Zhang, X.; Zhang, Xiao; Bai, Pengfei; van den Berg, Albert; Zhou, Guofu

    2014-01-01

    Displays are ubiquitous in modern life, and there is a growing need to develop active, full color, video-rate reflective displays that perform well in high-light conditions. The core of display technology is to generate or manipulate light in the visible wavelength. Colored fluids or fluids with

  17. Data Display Markup Language (DDML) Handbook

    Science.gov (United States)

    2017-01-31

    Moreover, the tendency of T&E is towards a plug-and-play-like data acquisition system that requires standard languages and modules for data displays...Telemetry Group DOCUMENT 127-17 DATA DISPLAY MARKUP LANGUAGE (DDML) HANDBOOK DISTRIBUTION A: APPROVED FOR...DOCUMENT 127-17 DATA DISPLAY MARKUP LANGUAGE (DDML) HANDBOOK January 2017 Prepared by Telemetry Group

  18. Reconfigurable Full-Page Braille Displays

    Science.gov (United States)

    Garner, H. Douglas

    1994-01-01

    Electrically actuated braille display cells of proposed type arrayed together to form full-page braille displays. Like other braille display cells, these provide changeable patterns of bumps driven by digitally recorded text stored on magnetic tapes or in solid-state electronic memories. Proposed cells contain electrorheological fluid. Viscosity of such fluid increases in strong electrostatic field.

  19. 27 CFR 6.83 - Product displays.

    Science.gov (United States)

    2010-04-01

    ... industry member of giving or selling product displays to a retailer does not constitute a means to induce... costs are excluded. (2) All product displays must bear conspicuous and substantial advertising matter on... address of the retailer may appear on the product displays. (3) The giving or selling of such...

  20. New Control Technique Applied in Dynamic Voltage Restorer for Voltage Sag Mitigation

    Directory of Open Access Journals (Sweden)

    Rosli Omar

    2010-01-01

    Full Text Available The Dynamic Voltage Restorer (DVR was a power electronics device that was able to compensate voltage sags on critical loads dynamically. The DVR consists of VSC, injection transformers, passive filters and energy storage (lead acid battery. By injecting an appropriate voltage, the DVR restores a voltage waveform and ensures constant load voltage. There were so many types of the control techniques being used in DVR for mitigating voltage sags. The efficiency of the DVR depends on the efficiency of the control technique involved in switching the inverter. Problem statement: Simulation and experimental investigation toward new algorithms development based on SVPWM. Understanding the nature of DVR and performance comparisons between the various controller technologies available. The proposed controller using space vector modulation techniques obtain higher amplitude modulation indexes if compared with conventional SPWM techniques. Moreover, space vector modulation techniques can be easily implemented using digital processors. Space vector PWM can produce about 15% higher output voltage than standard Sinusoidal PWM. Approach: The purpose of this research was to study the implementation of SVPWM in DVR. The proposed control algorithm was investigated through computer simulation by using PSCAD/EMTDC software. Results: From simulation and experimental results showed the effectiveness and efficiency of the proposed controller based on SVPWM in mitigating voltage sags in low voltage distribution systems. It was concluded that its controller also works well both in balance and unbalance conditions of voltages. Conclusion/Recommendations: The simulation and experimental results of a DVR using PSCAD/EMTDC software based on SVPWM technique showed clearly the performance of the DVR in mitigating voltage sags. The DVR operates without any difficulties to inject the appropriate voltage component to correct rapidly any anomaly in the supply voltage to keep the

  1. CERN students display their work

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    The first poster session by students working on the LHC experiments, organised by the LPCC, was a great success. Showcasing the talents of over a hundred young physicists from all over the world, it was an opportunity for everyone at CERN to check out the wide range of research work being done by the new generation of physicists at CERN.   At 5.30 p.m. on Wednesday 23 March, the first poster session by CERN students took place in Restaurant No.1, where no fewer than 87 posters went on public display. The students were split into 8 groups according to their research field* and all were on hand to answer the questions of an inquisitive audience. TH Department's Michelangelo Mangano, who is head of the LHC Physics Centre at CERN (LPCC) and is responsible for the initiative, confirms that nothing was left to chance, even the choice of date: "We wanted to make the most of the general enthusiasm around the winter conferences and the meeting of the LHC Experiments Committee to present the stud...

  2. Citizenship displayed by disabled people

    Directory of Open Access Journals (Sweden)

    Eliana Prado Carlino

    2010-12-01

    Full Text Available By investigating the processes by which successful teachers become activate citizens and by listening to the diversity and richness of their life and formation stories, this work became possible. Its aim is to display some of the utterances of two Down Syndrome individuals and their active-citizenship activities. Their stories were told in the reports of two teachers when describing their personal and professional history, and were considered to be an integral part of it. Thus, some of the utterances and perceptions with which these two individuals elaborate their references, their worldview and their active-citizenship activity are evidenced in this paper. This article is based on the language conceptions of Vygotsky and Bakhtin who defend the idea that the group and the social mentality are ingrain in the individual. Hence, the history of one person reveals that of many others, since there is a deep link between the individual and the social in the formation of a subjective worldview. As a result, it can be easily seen that the utterances expressed by the participants in this research cannot be considered strictly individual because enunciation is social in nature. Despite the fact that the utterances are those of individuals, they manifest a collective reality. This demonstrates the real advantages and possibilities that deficient people get from their participation and intervention in society.

  3. Tactile feedback display with spatial and temporal resolutions.

    Science.gov (United States)

    Vishniakou, Siarhei; Lewis, Brian W; Niu, Xiaofan; Kargar, Alireza; Sun, Ke; Kalajian, Michael; Park, Namseok; Yang, Muchuan; Jing, Yi; Brochu, Paul; Sun, Zhelin; Li, Chun; Nguyen, Truong; Pei, Qibing; Wang, Deli

    2013-01-01

    We report the electronic recording of the touch contact and pressure using an active matrix pressure sensor array made of transparent zinc oxide thin-film transistors and tactile feedback display using an array of diaphragm actuators made of an interpenetrating polymer elastomer network. Digital replay, editing and manipulation of the recorded touch events were demonstrated with both spatial and temporal resolutions. Analog reproduction of the force is also shown possible using the polymer actuators, despite of the high driving voltage. The ability to record, store, edit, and replay touch information adds an additional dimension to digital technologies and extends the capabilities of modern information exchange with the potential to revolutionize physical learning, social networking, e-commerce, robotics, gaming, medical and military applications.

  4. Tactile Feedback Display with Spatial and Temporal Resolutions

    Science.gov (United States)

    Vishniakou, Siarhei; Lewis, Brian W.; Niu, Xiaofan; Kargar, Alireza; Sun, Ke; Kalajian, Michael; Park, Namseok; Yang, Muchuan; Jing, Yi; Brochu, Paul; Sun, Zhelin; Li, Chun; Nguyen, Truong; Pei, Qibing; Wang, Deli

    2013-08-01

    We report the electronic recording of the touch contact and pressure using an active matrix pressure sensor array made of transparent zinc oxide thin-film transistors and tactile feedback display using an array of diaphragm actuators made of an interpenetrating polymer elastomer network. Digital replay, editing and manipulation of the recorded touch events were demonstrated with both spatial and temporal resolutions. Analog reproduction of the force is also shown possible using the polymer actuators, despite of the high driving voltage. The ability to record, store, edit, and replay touch information adds an additional dimension to digital technologies and extends the capabilities of modern information exchange with the potential to revolutionize physical learning, social networking, e-commerce, robotics, gaming, medical and military applications.

  5. Field emission digital display tube with nano-graphite film cathode

    Institute of Scientific and Technical Information of China (English)

    Jicai Deng; Zhanling Lu; Binglin Zhang

    2008-01-01

    The field emission digital display tube with a nano-crystalline graphite cold cathode is designed and fabricated. Under the control of the driving circuits, a dynamic digital display with uniform luminance distribution is realized. The luminance of the character segments is 190 cd/m2 at the operating voltage of 900 V. And the stable emission is attained with a fluctuation of about 3% at an average segment current of 75 μA. The results demonstrate that nano-crystalline graphite film is a promising material for cold cathode.

  6. Fuel Cell/Electrochemical Cell Voltage Monitor

    Science.gov (United States)

    Vasquez, Arturo

    2012-01-01

    A concept has been developed for a new fuel cell individual-cell-voltage monitor that can be directly connected to a multi-cell fuel cell stack for direct substack power provisioning. It can also provide voltage isolation for applications in high-voltage fuel cell stacks. The technology consists of basic modules, each with an 8- to 16-cell input electrical measurement connection port. For each basic module, a power input connection would be provided for direct connection to a sub-stack of fuel cells in series within the larger stack. This power connection would allow for module power to be available in the range of 9-15 volts DC. The relatively low voltage differences that the module would encounter from the input electrical measurement connection port, coupled with the fact that the module's operating power is supplied by the same substack voltage input (and so will be at similar voltage), provides for elimination of high-commonmode voltage issues within each module. Within each module, there would be options for analog-to-digital conversion and data transfer schemes. Each module would also include a data-output/communication port. Each of these ports would be required to be either non-electrical (e.g., optically isolated) or electrically isolated. This is necessary to account for the fact that the plurality of modules attached to the stack will normally be at a range of voltages approaching the full range of the fuel cell stack operating voltages. A communications/ data bus could interface with the several basic modules. Options have been identified for command inputs from the spacecraft vehicle controller, and for output-status/data feeds to the vehicle.

  7. Polymer-based electrochemical devices for logic functions and paper displays

    Science.gov (United States)

    Berggren, Magnus; Nilsson, David; Chen, Miaoxiang; Andersson, Peter; Kugler, Thomas; Malmstroem, Anna; Haell, Jessica; Remonen, Tommi; Robinson, Nathaniel D.

    2003-07-01

    Here, we report on devices based on patterned thin films of the conducting polymer system poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulphonic acid) (PEDOT:PSS) combined with patterns of solid electrolyte. The key device functionalities base on the updating of the RedOx state of PEDOT. This results in control of the electronic properties of this conjugated polymer, i.e. the conductivity and optical properties are updated. Based on this we have achieved electric current rectifiers, transistors and display cells. Also, matrix addressed displays will be presented. Electrochemical switching is taking place when the oxidation and reduction potentials are overcome respectively. Therefore, these devices operate at voltage levels less then 2 Volts. Low voltage operation is achieved in devices not requiring any extremely narrow dimensions, as is the case for field effect driven devices. All devices reported can or has been made using standard printing techniques on flexible carriers.

  8. Optimizing virtual reality for all users through gaze-contingent and adaptive focus displays

    Science.gov (United States)

    Padmanaban, Nitish; Konrad, Robert; Stramer, Tal; Wetzstein, Gordon

    2017-01-01

    From the desktop to the laptop to the mobile device, personal computing platforms evolve over time. Moving forward, wearable computing is widely expected to be integral to consumer electronics and beyond. The primary interface between a wearable computer and a user is often a near-eye display. However, current generation near-eye displays suffer from multiple limitations: they are unable to provide fully natural visual cues and comfortable viewing experiences for all users. At their core, many of the issues with near-eye displays are caused by limitations in conventional optics. Current displays cannot reproduce the changes in focus that accompany natural vision, and they cannot support users with uncorrected refractive errors. With two prototype near-eye displays, we show how these issues can be overcome using display modes that adapt to the user via computational optics. By using focus-tunable lenses, mechanically actuated displays, and mobile gaze-tracking technology, these displays can be tailored to correct common refractive errors and provide natural focus cues by dynamically updating the system based on where a user looks in a virtual scene. Indeed, the opportunities afforded by recent advances in computational optics open up the possibility of creating a computing platform in which some users may experience better quality vision in the virtual world than in the real one. PMID:28193871

  9. Optimizing virtual reality for all users through gaze-contingent and adaptive focus displays

    Science.gov (United States)

    Padmanaban, Nitish; Konrad, Robert; Stramer, Tal; Cooper, Emily A.; Wetzstein, Gordon

    2017-02-01

    From the desktop to the laptop to the mobile device, personal computing platforms evolve over time. Moving forward, wearable computing is widely expected to be integral to consumer electronics and beyond. The primary interface between a wearable computer and a user is often a near-eye display. However, current generation near-eye displays suffer from multiple limitations: they are unable to provide fully natural visual cues and comfortable viewing experiences for all users. At their core, many of the issues with near-eye displays are caused by limitations in conventional optics. Current displays cannot reproduce the changes in focus that accompany natural vision, and they cannot support users with uncorrected refractive errors. With two prototype near-eye displays, we show how these issues can be overcome using display modes that adapt to the user via computational optics. By using focus-tunable lenses, mechanically actuated displays, and mobile gaze-tracking technology, these displays can be tailored to correct common refractive errors and provide natural focus cues by dynamically updating the system based on where a user looks in a virtual scene. Indeed, the opportunities afforded by recent advances in computational optics open up the possibility of creating a computing platform in which some users may experience better quality vision in the virtual world than in the real one.

  10. High voltage electricity installations a planning perspective

    CERN Document Server

    Jay, Stephen Andrew

    2006-01-01

    The presence of high voltage power lines has provoked widespread concern for many years. High Voltage Electricity Installations presents an in-depth study of policy surrounding the planning of high voltage installations, discussing the manner in which they are percieved by the public, and the associated environmental issues. An analysis of these concerns, along with the geographical, environmental and political influences that shape their expression, is presented. Investigates local planning policy in an area of the energy sector that is of highly topical environmental and public concern Cover

  11. Piezoelectric Voltage Coupled Reentrant Cavity Resonator

    CERN Document Server

    Carvalho, Natalia C; Floch, Jean-Michel Le; Tobar, Michael Edmund

    2014-01-01

    A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that such a cavity can be implemented as a voltage tunable resonator, a transducer for exciting and measuring mechanical modes of the structure and a transducer for measuring comparative sensitivity of the piezoelectric material. Experiments were conducted at room and cryogenic temperatures with results verified using Finite Element software.

  12. Voltage controlled spintronics device for logic applications.

    Energy Technology Data Exchange (ETDEWEB)

    Bader, S. D.; You, C.-Y.

    1999-09-03

    We consider logic device concepts based on our previously proposed spintronics device element whose magnetization orientation is controlled by application of a bias voltage instead of a magnetic field. The basic building block is the voltage-controlled rotation (VCR) element that consists of a four-layer structure--two ferromagnetic layers separated by both nanometer-thick insulator and metallic spacer layers. The interlayer exchange coupling between the two ferromagnetic layers oscillates as a function of applied voltage. We illustrate transistor-like concepts and re-programmable logic gates based on VCR elements.

  13. Dynamic lens and monovision 3D displays to improve viewer comfort

    CERN Document Server

    Johnson, Paul V; Kim, Joowan; Saunter, Christopher D; Love, Gordon D; Banks, Martin S

    2016-01-01

    Stereoscopic 3D (S3D) displays provide an additional sense of depth compared to non-stereoscopic displays by sending slightly different images to the two eyes. But conventional S3D displays do not reproduce all natural depth cues. In particular, focus cues are incorrect causing mismatches between accommodation and vergence: The eyes must accommodate to the display screen to create sharp retinal images even when binocular disparity drives the eyes to converge to other distances. This mismatch causes visual discomfort and reduces visual performance. We propose and assess two new techniques that are designed to reduce the vergence-accommodation conflict and thereby decrease discomfort and increase visual performance. These techniques are much simpler to implement than previous conflict-reducing techniques.

  14. Laser-based displays: a review.

    Science.gov (United States)

    Chellappan, Kishore V; Erden, Erdem; Urey, Hakan

    2010-09-01

    After the invention of lasers, in the past 50 years progress made in laser-based display technology has been very promising, with commercial products awaiting release to the mass market. Compact laser systems, such as edge-emitting diodes, vertical-cavity surface-emitting lasers, and optically pumped semiconductor lasers, are suitable candidates for laser-based displays. Laser speckle is an important concern, as it degrades image quality. Typically, one or multiple speckle reduction techniques are employed in laser displays to reduce speckle contrast. Likewise, laser safety issues need to be carefully evaluated in designing laser displays under different usage scenarios. Laser beam shaping using refractive and diffractive components is an integral part of laser displays, and the requirements depend on the source specifications, modulation technique, and the scanning method being employed in the display. A variety of laser-based displays have been reported, and many products such as pico projectors and laser televisions are commercially available already.

  15. Study of highly precise outdoor characterization technique for photovoltaic modules in terms of reproducibility

    Science.gov (United States)

    Fukabori, Akihiro; Takenouchi, Takakazu; Matsuda, Youji; Tsuno, Yuki; Hishikawa, Yoshihiro

    2015-08-01

    In this study, novel outdoor measurements were conducted for highly precise characterization of photovoltaic (PV) modules by measuring current-voltage (I-V) curves with fast sweep speeds and module’s temperature, and with a PV sensor for reference. Fast sweep speeds suppressed the irradiance variation. As a result, smooth I-V curves were obtained and the PV parameter deviation was suppressed. The module’s temperature was measured by attaching resistive temperature detector sensors on the module’s backsheet. The PV sensor was measured synchronously with the PV module. The PV parameters including Isc, Pmax, Voc, and FF were estimated after correcting the I-V curves using the IEC standards. The reproducibility of Isc, Pmax, Voc, and FF relative to the outdoor fits was evaluated as 0.43, 0.58, 0.24, and 0.23%, respectively. The results demonstrate that highly precise measurements are possible using a PV measurement system with the three above-mentioned features.

  16. Microspheres in Plasma Display Panels

    Science.gov (United States)

    2006-01-01

    Filling small bubbles of molten glass with gases is just as difficult as it sounds, but the technical staff at NASA is not known to shy away from a difficult task. When Microsphere Systems, Inc. (MSI), of Ypsilanti, Michigan, and Imaging Systems Technology, Inc. (IST), of Toledo, Ohio, were trying to push the limits of plasma displays but were having difficulty with the designs, NASA s Glenn Garrett Morgan Commercialization Initiative (GMCI) assembled key personnel at Glenn Research Center and Ohio State University for a brainstorming session to come up with a solution for the companies. They needed a system that could produce hollow, glass micro-sized spheres (microspheres) that could be filled with a variety of gasses. But the extremely high temperature required to force the micro-sized glass bubbles to form at the tip of a metal nozzle resulted in severe discoloration of the microspheres. After countless experiments on various glass-metal combinations, they had turned to the GMCI for help. NASA experts in advanced metals, ceramics, and glass concluded that a new design approach was necessary. The team determined that what was needed was a phosphate glass composition that would remain transparent, and they went to work on a solution. Six weeks later, using the design tips from the NASA team, Tim Henderson, president of MSI, had designed a new system in which all surfaces in contact with the molten glass would be ceramic instead of metal. Meanwhile, IST was able to complete a Phase I Small Business Innovation Research (SBIR) grant supported by the National Science Foundation (NSF) and supply a potential customer with samples of the microspheres for evaluation as filler materials for high-performance insulations.

  17. Military display market segment: wearable and portable

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    2003-09-01

    The military display market (MDM) is analyzed in terms of one of its segments, wearable and portable displays. Wearable and portable displays are those embedded in gear worn or carried by warfighters. Categories include hand-mobile (direct-view and monocular/binocular), palm-held, head/helmet-mounted, body-strapped, knee-attached, lap-born, neck-lanyard, and pocket/backpack-stowed. Some 62 fielded and developmental display sizes are identified in this wearable/portable MDM segment. Parameters requiring special consideration, such as weight, luminance ranges, light emission, viewing angles, and chromaticity coordinates, are summarized and compared. Ruggedized commercial versus commercial off-the-shelf designs are contrasted; and a number of custom displays are also found in this MDM category. Display sizes having aggregate quantities of 5,000 units or greater or having 2 or more program applications are identified. Wearable and portable displays are also analyzed by technology (LCD, LED, CRT, OLED and plasma). The technical specifications and program history of several high-profile military programs are discussed to provide a systems context for some representative displays and their function. As of August 2002 our defense-wide military display market study has documented 438,882 total display units distributed across 1,163 display sizes and 438 weapon systems. Wearable and portable displays account for 202,593 displays (46% of total DoD) yet comprise just 62 sizes (5% of total DoD) in 120 weapons systems (27% of total DoD). Some 66% of these wearable and portable applications involve low information content displays comprising just a few characters in one color; however, there is an accelerating trend towards higher information content units capable of showing changeable graphics, color and video.

  18. Programmable high voltage power supply with regulation confined to the high voltage section

    Science.gov (United States)

    Castell, Karen D. (Inventor); Ruitberg, Arthur P. (Inventor)

    1994-01-01

    A high voltage power supply in a dc-dc converter configuration includes a pre-regulator which filters and regulates the dc input and drives an oscillator which applies, in turn, a low voltage ac signal to the low side of a step-up high voltage transformer. The high voltage side of the transformer drives a voltage multiplier which provides a stepped up dc voltage to an output filter. The output voltage is sensed by a feedback network which then controls a regulator. Both the input and output of the regulator are on the high voltage side, avoiding isolation problems. The regulator furnishes a portion of the drive to the voltage multiplier, avoiding having a regulator in series with the load with its attendant, relatively high power losses. This power supply is highly regulated, has low power consumption, a low parts count and may be manufactured at low cost. The power supply has a programmability feature that allows for the selection of a large range of output voltages.

  19. Transformerless DC-DC Converter Using Cockcroft-Walton Voltage Multiplier to Obtain High DC Voltage

    Directory of Open Access Journals (Sweden)

    Meghana G Naik,

    2014-11-01

    Full Text Available In the present scenario the use of transformer for high voltages in converter circuit reduces the overall operating efficiency due to leakage inductance and use of transformer also increases the operational cost. . Therefore the proposed system is implemented with transformer less DC-DC converter so as to obtain high DC voltage with the use of nine stage Cockcroft-Walton (CW voltage multiplier. The proposed converter operates in CCM (continuous conduction mode, so that the converter switch stress, the switching losses are reduced. The DC voltage at the input of the proposed model is low and is boosted up by boost inductor (Ls in DC-DC converter stage and performs inverter operation. The number of stages in CW-voltage multiplier circuit is applied with low input pulsating DC (AC Voltage voltage where it is getting converted to high DC output voltage. The proposed converter switches operates at two independent frequencies, modulating (fsm andalternating (fsc frequency. The fsm operates at higher frequency of the output while the fsc operates at lower frequency of the desired output voltage ripple and the output ripples can be adjusted by the switch Sc1 and Sc2. The regulation of the output voltage is achieved by controlling the Duty ratio.The simulation is carried over by the MATLABSIMULINK.

  20. Degradation Mechanism of Polyimide Film Under Square Impulse Voltages

    Institute of Scientific and Technical Information of China (English)

    LUO Yang; WU Guangning; XIA Jinfeng; ZHU Guangya; WANG Peng; CAO Kaijiang

    2013-01-01

    Partial discharge (PD) under a sequence of high-repetition-rate square pulses is one of the key factors leading to premature failure of insulation systems of inverter-fed motors.Polyimide (PI) film is an important type of insulating material used in the inverter-fed motors.In this paper,micro-morphology and structure change of PI film aged by bipolar continuous square impulse voltage (BCSIV) with amplitude above partial discharge inception voltage (PDIV) are investigated by scanning electron microscope (SEM).The chemical bonds of PI chain are analyzed through Fourier transform infrared spectroscopy (FTIR).The results show that the degradation mechanism of PI film is the fracturing of chemical bonds caused by the erosion from PDs.Three layers are displayed in both 100 HN film and 100 CR film.The degradation path of PI film is initiated from surface and then gradually extends to the interior with continuous aging.Nano-fillers can retard the degradation of PI film and prolong its lifetime.

  1. Technical feasibility study of Voltage Optimization Unit

    DEFF Research Database (Denmark)

    Hu, Junjie; Marinelli, Mattia; Coppo, Massimiliano

    transformer with OLTC per phase is necessary and valuable. The main conclusion is that power distribution transformer with OLTC control on each phase can significantly improve the PV hosting capacity in the analyzed unbal-anced scenarios. To investigate the verification problem, a simulation study...... is performed using the soft-wares DigSilent PowerFactory and Matlab. In this simulation study, a real low voltage network from Dong Eldistribution is modeled in Powerfactory. The measured data of the real low voltage network is analyzed and the resulting loading profiles including active and reactive power...... are used as load basics for the analysis. In term of PV genera-tion profiles, a realistic PV output power is assumed. Four relevant indicies such as phase neutral voltage, netural potential voltage, unbalanced factor (VUF), and power losses are evaluated in the present study. The simulation tests include...

  2. Can undersea voltage measurements detect tsunamis?

    Digital Repository Service at National Institute of Oceanography (India)

    Manoj, C.; Kuvshinov, A.; Neetu, S.; Harinarayana, T.

    The movement of electrically conducting ocean water in the ambient geomagnetic field induces secondary electric and magnetic fields in the oceans. Ocean water transport is now routinely inferred from undersea cable voltage data. We try to answer...

  3. Low voltage arc formation in railguns

    Science.gov (United States)

    Hawke, Ronald S.

    1987-01-01

    A low voltage plasma arc is first established across the rails behind the projectile by switching a low voltage high current source across the rails to establish a plasma arc by vaporizing a fuse mounted on the back of the projectile, maintaining the voltage across the rails below the railgun breakdown voltage to prevent arc formation ahead of the projectile. After the plasma arc has been formed behind the projectile a discriminator switches the full energy bank across the rails to accelerate the projectile. A gas gun injector may be utilized to inject a projectile into the breech of a railgun. The invention permits the use of a gas gun or gun powder injector and an evacuated barrel without the risk of spurious arc formation in front of the projectile.

  4. Induced voltage in an open wire

    CERN Document Server

    Morawetz, K; Trupp, A

    2015-01-01

    A puzzle arising from Faraday's law is considered and solved concerning the question which voltage is induced in an open wire feeling a time-varying homogeneous magnetic field. The longitudinal electric field contributes 1/3 and the transverse field 2/3 to the induced voltage. The representation of a homogeneous and time-varying magnetic field implies unavoidably a certain symmetry point or line dependent on the geometry of the source. As a consequence the induced voltage of an open wire is found to be the area covered with respect to the symmetry line or point perpendicular to the magnetic field. This in turn allows to find the symmetry points of a magnetic field source by measuring the voltage of an open wire. We present two exactly solvable models for a symmetry point and for a symmetry line. The results are applicable to open circuit problems and for astrophysical applications.

  5. High voltage and electrical insulation engineering

    CERN Document Server

    Arora, Ravindra

    2011-01-01

    "The book is written for students as well as for teachers and researchers in the field of High Voltage and Insulation Engineering. It is based on the advance level courses conducted at TU Dresden, Germany and Indian Institute of Technology Kanpur, India. The book has a novel approach describing the fundamental concept of field dependent behavior of dielectrics subjected to high voltage. There is no other book in the field of high voltage engineering following this new approach in describing the behavior of dielectrics. The contents begin with the description of fundamental terminology in the subject of high voltage engineering. It is followed by the classification of electric fields and the techniques of field estimation. Performance of gaseous, liquid and solid dielectrics under different field conditions is described in the subsequent chapters. Separate chapters on vacuum as insulation and the lightning phenomenon are included"--

  6. Combined Digital Electronic Current and Voltage Transducer

    Institute of Scientific and Technical Information of China (English)

    段雄英; 邹积岩; 等

    2002-01-01

    A high-performance current and voltage measurement system has been developed in power system.The system is composed of two parts:one current measurement element and one voltage measurement element.A Rogowski coil and a capacitive voltage divider are used respectively for the line current and voltage measurements.Active electronic components are used to modulate signal,and power supply for these components is drawn from power line via an auxiliary current transformer,Measurement signal is transmitted y optical fibers,which is resistant to electromagnetic induction and noise,With careful design and the use of digital signal processing technology,the whole system can meet 0.5% accuracy for metering and provides large dynamic range coupled with good accuracy for protective relaying use.

  7. Compact, Lightweight, High Voltage Propellant Isolators Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TA&T, Inc. proposes an enabling fabrication process for high voltage isolators required in high power solar electric and nuclear electric propulsion (SEP and...

  8. Compact, Lightweight, High Voltage Propellant Isolators Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TA&T, Inc. proposes an enabling fabrication process for high voltage isolators required in high power solar electric and nuclear electric propulsion (SEP and...

  9. Differential subtraction display: a unified approach for isolation of cDNAs from differentially expressed genes.

    Science.gov (United States)

    Pardinas, J R; Combates, N J; Prouty, S M; Stenn, K S; Parimoo, S

    1998-03-15

    We have developed a novel efficient approach, termed differential subtraction display, for the identification of differentially expressed genes. Several critical parameters for the reproducibility and enhanced sensitivity of display, as well as steps to reduce the number of false positive cDNA species, have been defined. These include- (a) use of standardized oligo(dT)-primed cDNA pools rather than total RNA as the starting material for differential display, (b) critical role of optimal cDNA input for each distinct class of primers, (c) phenomena of primer dominance and interference, and (d) design of a novel set of enhanced specificity anchor primers. Introduction of an efficient subtractive hybridization step prior to cloning of cDNA species enriches the bona fide cDNA species that are either exclusively present in one sample (+/-) or show altered expression (up-/down-regulation) in RNA samples from two different tissues or cell types. This approach, in comparison to differential display, has several advantages in terms of reproducibility and enhanced sensitivity of display coupled to the cloning of enriched bona fide cDNA species corresponding to differentially expressed RNAs.

  10. Venusian Polar Vortex reproduced by a general circulation model

    Science.gov (United States)

    Ando, Hiroki; Sugimoto, Norihiko; Takagi, Masahiro

    2016-10-01

    Unlike the polar vortices observed in the Earth, Mars and Titan atmospheres, the observed Venus polar vortex is warmer than the mid-latitudes at cloud-top levels (~65 km). This warm polar vortex is zonally surrounded by a cold latitude band located at ~60 degree latitude, which is a unique feature called 'cold collar' in the Venus atmosphere [e.g. Taylor et al. 1980; Piccioni et al. 2007]. Although these structures have been observed in numerous previous observations, the formation mechanism is still unknown. In addition, an axi-asymmetric feature is always seen in the warm polar vortex. It changes temporally and sometimes shows a hot polar dipole or S-shaped structure as shown by a lot of infrared measurements [e.g. Garate-Lopez et al. 2013; 2015]. However, its vertical structure has not been investigated. To solve these problems, we performed a numerical simulation of the Venus atmospheric circulation using a general circulation model named AFES for Venus [Sugimoto et al. 2014] and reproduced these puzzling features.And then, the reproduced structures of the atmosphere and the axi-asymmetirc feature are compared with some previous observational results.In addition, the quasi-periodical zonal-mean zonal wind fluctuation is also seen in the Venus polar vortex reproduced in our model. This might be able to explain some observational results [e.g. Luz et al. 2007] and implies that the polar vacillation might also occur in the Venus atmosphere, which is silimar to the Earth's polar atmosphere. We will also show some initial results about this point in this presentation.

  11. Reproducibility and Transparency in Ocean-Climate Modeling

    Science.gov (United States)

    Hannah, N.; Adcroft, A.; Hallberg, R.; Griffies, S. M.

    2015-12-01

    Reproducibility is a cornerstone of the scientific method. Within geophysical modeling and simulation achieving reproducibility can be difficult, especially given the complexity of numerical codes, enormous and disparate data sets, and variety of supercomputing technology. We have made progress on this problem in the context of a large project - the development of new ocean and sea ice models, MOM6 and SIS2. Here we present useful techniques and experience.We use version control not only for code but the entire experiment working directory, including configuration (run-time parameters, component versions), input data and checksums on experiment output. This allows us to document when the solutions to experiments change, whether due to code updates or changes in input data. To avoid distributing large input datasets we provide the tools for generating these from the sources, rather than provide raw input data.Bugs can be a source of non-determinism and hence irreproducibility, e.g. reading from or branching on uninitialized memory. To expose these we routinely run system tests, using a memory debugger, multiple compilers and different machines. Additional confidence in the code comes from specialised tests, for example automated dimensional analysis and domain transformations. This has entailed adopting a code style where we deliberately restrict what a compiler can do when re-arranging mathematical expressions.In the spirit of open science, all development is in the public domain. This leads to a positive feedback, where increased transparency and reproducibility makes using the model easier for external collaborators, who in turn provide valuable contributions. To facilitate users installing and running the model we provide (version controlled) digital notebooks that illustrate and record analysis of output. This has the dual role of providing a gross, platform-independent, testing capability and a means to documents model output and analysis.

  12. Assessment of precision and reproducibility of a new myograph

    Directory of Open Access Journals (Sweden)

    Piepenbrock Siegfried

    2007-12-01

    Full Text Available Abstract Background The physiological characteristics of muscle activity and the assessment of muscle strength represent important diagnostic information. There are many devices that measure muscle force in humans, but some require voluntary contractions, which are difficult to assess in weak or unconscious patients who are unable to complete a full range of voluntary force assessment tasks. Other devices, which obtain standard muscle contractions by electric stimulations, do not have the technology required to induce and measure reproducible valid contractions at the optimum muscle length. Methods In our study we used a newly developed diagnostic device which measures accurately the reproducibility and time-changed-variability of the muscle force in an individual muscle. A total of 500 in-vivo measurements of supra-maximal isometric single twitch contractions were carried out on the musculus adductor pollicis of 5 test subjects over 10 sessions, with ten repetitions per session. The same protocol was performed on 405 test subjects with two repetitions each to determine a reference-interval on healthy subjects. Results Using our test setting, we found a high reproducibility of the muscle contractions of each test subject. The precision of the measurements performed with our device was 98.74%. Only two consecutive measurements are needed in order to assess a real, representative individual value of muscle force. The mean value of the force of contraction was 9.51 N and the 95% reference interval was 4.77–14.25 N. Conclusion The new myograph is a highly reliable measuring device with which the adductor pollicis can be investigated at the optimum length. It has the potential to become a reliable and valid tool for diagnostic in the clinical setting and for monitoring neuromuscular diseases.

  13. Psychophysiological responses to pain identify reproducible human clusters.

    Science.gov (United States)

    Farmer, Adam D; Coen, Steven J; Kano, Michiko; Paine, Peter A; Shwahdi, Mustafa; Jafari, Jafar; Kishor, Jessin; Worthen, Sian F; Rossiter, Holly E; Kumari, Veena; Williams, Steven C R; Brammer, Michael; Giampietro, Vincent P; Droney, Joanne; Riley, Julia; Furlong, Paul L; Knowles, Charles H; Lightman, Stafford L; Aziz, Qasim

    2013-11-01

    Pain is a ubiquitous yet highly variable experience. The psychophysiological and genetic factors responsible for this variability remain unresolved. We hypothesised the existence of distinct human pain clusters (PCs) composed of distinct psychophysiological and genetic profiles coupled with differences in the perception and the brain processing of pain. We studied 120 healthy subjects in whom the baseline personality and anxiety traits and the serotonin transporter-linked polymorphic region (5-HTTLPR) genotype were measured. Real-time autonomic nervous system parameters and serum cortisol were measured at baseline and after standardised visceral and somatic pain stimuli. Brain processing reactions to visceral pain were studied in 29 subjects using functional magnetic resonance imaging (fMRI). The reproducibility of the psychophysiological responses to pain was assessed at year. In group analysis, visceral and somatic pain caused an expected increase in sympathetic and cortisol responses and activated the pain matrix according to fMRI studies. However, using cluster analysis, we found 2 reproducible PCs: at baseline, PC1 had higher neuroticism/anxiety scores (P ≤ 0.01); greater sympathetic tone (Ppain, less stimulus was tolerated (P ≤ 0.01), and there was an increase in parasympathetic tone (P ≤ 0.05). The 5-HTTLPR short allele was over-represented (P ≤ 0.005). PC2 had the converse profile at baseline and during pain. Brain activity differed (P ≤ 0.001); greater activity occurred in the left frontal cortex in PC1, whereas PC2 showed greater activity in the right medial/frontal cortex and right anterior insula. In health, 2 distinct reproducible PCs exist in humans. In the future, PC characterization may help to identify subjects at risk for developing chronic pain and may reduce variability in brain imaging studies.

  14. Reproducibility and responsiveness of the Whiplash Disability Questionnaire.

    Science.gov (United States)

    Willis, Cameron; Niere, Kenneth Robert; Hoving, Jan Lucas; Green, Sally; O'Leary, Elizabeth F; Buchbinder, Rachelle

    2004-08-01

    This study continued the validation of a Whiplash Specific Disability Questionnaire (WDQ) that was developed from the Neck Disability Index (NDI) using self-reported disabilities in a group of participants experiencing whiplash-associated disorders [J Manipulative Physiol Ther 14 (1991) 409]. Previous research has established the content, construct and face validity and internal consistency of the WDQ. The aim of this study was to establish the short-term and medium-term test-retest reliability and responsiveness of the WDQ. Participants (n = 63) receiving physiotherapy treatment for WAD were recruited from 30 private physiotherapy practices in Melbourne, Australia. Each participant completed three WDQ questionnaires over a 1-month period, the first two separated by 24 h. The third questionnaire contained an additional item that asked respondents to rate their perceived change in condition over the month. Reproducibility was determined using an intra-class correlation co-efficient. Responsiveness was assessed via correlation with participant perceived change, the effect size, standardised response mean (SRM) and the responsiveness statistic. Results demonstrated excellent short-term test-retest reliability (ICC 0.96). Reproducibility over 1 month was excellent (ICC 0.93). Correlation between change in WDQ score over 1 month and participant perceived change was r(s) = 0.64, the effect size was 0.03, the SRM was 0.08 and the responsiveness statistics were 0.90 (participants who improved) and -1.60 (participants who deteriorated). The minimal detectable change of the WDQ was established at 15 points. These results demonstrate that the WDQ has excellent short- and medium-term reproducibility and responsiveness in a population seeking treatment for WAD.

  15. Reproducibility of gallbladder ejection fraction measured by fatty meal cholescintigraphy

    Energy Technology Data Exchange (ETDEWEB)

    Al-Muqbel, Kusai M.; Hani, M. N. Hani; Elheis, M. A.; Al-Omari, M. H. [School of Medicine, Jordan University of Science and Technology, Irbid (Jordan)

    2010-12-15

    There are conflicting data in the literature regarding the reproducibility of the gallbladder ejection fraction (GBEF) measured by fatty meal cholescintigraphy (CS). We aimed to test the reproducibility of GBEF measured by fatty meal CS. Thirty-five subjects (25 healthy volunteers and 10 patients with chronic abdominal pain) underwent fatty meal CS twice in order to measure GBEF1 and GBEF2. The healthy volunteers underwent a repeat scan within 1-13 months from the first scan. The patients underwent a repeat scan within 1-4 years from the first scan and were not found to have chronic acalculous cholecystitis (CAC). Our standard fatty meal was composed of a 60-g Snickers chocolate bar and 200 ml full-fat yogurt. The mean {+-} SD values for GBEF1 and GBEF2 were 52{+-}17% and 52{+-}16%, respectively. There was a direct linear correlation between the values of GBEF1 and GBEF2 for the subjects, with a correlation coefficient of 0.509 (p=0.002). Subgroup data analysis of the volunteer group showed that there was significant linear correlation between volunteer values of GBEF1 and GBEF2, with a correlation coefficient of 0.473 (p=0.017). Subgroup data analysis of the non-CAC patient group showed no significant correlation between patient values of GBEF1 and GBEF2, likely due to limited sample size. This study showed that fatty meal CS is a reliable test in gallbladder motility evaluation and that GBEF measured by fatty meal CS is reproducible

  16. Voltage, Temperature, Frequency Margin Test Report

    DEFF Research Database (Denmark)

    Denver, Troelz

    1999-01-01

    The purpose of the tests is to establish the camera functionality when it is exposed to an extreme environment for prolonged periods, thus simulating the end of life performance. This environment covers temperature, input clock frequency and supply voltage variation......The purpose of the tests is to establish the camera functionality when it is exposed to an extreme environment for prolonged periods, thus simulating the end of life performance. This environment covers temperature, input clock frequency and supply voltage variation...

  17. Joint voltages resulting from lightning currents.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, William Arthur; Warne, Larry Kevin; Merewether, Kimball O.; Chen, Kenneth C.

    2007-03-01

    Simple formulas are given for the interior voltages appearing across bolted joints from exterior lightning currents. External slot and bolt inductances as well as internal slot and bolt diffusion effects are included. Both linear and ferromagnetic wall materials are considered. A useful simplification of the slot current distribution into linear stripline and cylindrical parts (near the bolts) allows the nonlinear voltages to be estimated in closed form.

  18. Voltage Mode-to-Current Mode Transformation

    Directory of Open Access Journals (Sweden)

    Tejmal S. Rathore

    2012-10-01

    Full Text Available This paper proposes a procedure for converting a class of Op Amp-, FTFN-, CC- and CFAbased voltage mode circuits to corresponding current mode circuits without requiring any additional circuit elements and finally from Op Amp-based voltage mode circuits to any of the FTFN, CC and CFA current mode circuits. The latter circuits perform better at high frequency than the former ones. The validity of the transformation has been checked on simulated circuits with PSPICE.

  19. Low-Voltage Hall Thruster Mode Transitions

    Science.gov (United States)

    2014-06-01

    Technical Paper 3. DATES COVERED (From - To) June 2014- July 2014 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER In-House Low-Voltage Hall Thruster Mode...ABSTRACT Past investigations of the 6kW-class H6 Hall thruster during low-voltage operation revealed two operating modes, corresponding to the...topologies were characterized for the H6 Hall thruster from 100V to 200V discharge, with variation in cathode flow fraction, cathode position inside and

  20. Reproducing wavelet kernel method in nonlinear system identification

    Institute of Scientific and Technical Information of China (English)

    WEN Xiang-jun; XU Xiao-ming; CAI Yun-ze

    2008-01-01

    By combining the wavelet decomposition with kernel method, a practical approach of universal multi-scale wavelet kernels constructed in reproducing kernel Hilbert space (RKHS) is discussed, and an identifica-tion scheme using wavelet support vector machines ( WSVM ) estimator is proposed for nonlinear dynamic sys-tems. The good approximating properties of wavelet kernel function enhance the generalization ability of the pro-posed method, and the comparison of some numerical experimental results between the novel approach and some existing methods is encouraging.