Video Surveillance using a Multi-Camera Tracking and Fusion System

OpenAIRE

Zhang , Zhong; Scanlon , Andrew; Yin , Weihong; Yu , Li; Venetianer , Péter L.

2008-01-01

International audience; Usage of intelligent video surveillance (IVS) systems is spreading rapidly. These systems are being utilized in a wide range of applications. In most cases, even in multi-camera installations, the video is processed independently in each feed. This paper describes a system that fuses tracking information from multiple cameras, thus vastly expanding its capabilities. The fusion relies on all cameras being calibrated to a site map, while the individual sensors remain lar...

Video content analysis on body-worn cameras for retrospective investigation

Science.gov (United States)

Bouma, Henri; Baan, Jan; ter Haar, Frank B.; Eendebak, Pieter T.; den Hollander, Richard J. M.; Burghouts, Gertjan J.; Wijn, Remco; van den Broek, Sebastiaan P.; van Rest, Jeroen H. C.

2015-10-01

In the security domain, cameras are important to assess critical situations. Apart from fixed surveillance cameras we observe an increasing number of sensors on mobile platforms, such as drones, vehicles and persons. Mobile cameras allow rapid and local deployment, enabling many novel applications and effects, such as the reduction of violence between police and citizens. However, the increased use of bodycams also creates potential challenges. For example: how can end-users extract information from the abundance of video, how can the information be presented, and how can an officer retrieve information efficiently? Nevertheless, such video gives the opportunity to stimulate the professionals' memory, and support complete and accurate reporting. In this paper, we show how video content analysis (VCA) can address these challenges and seize these opportunities. To this end, we focus on methods for creating a complete summary of the video, which allows quick retrieval of relevant fragments. The content analysis for summarization consists of several components, such as stabilization, scene selection, motion estimation, localization, pedestrian tracking and action recognition in the video from a bodycam. The different components and visual representations of summaries are presented for retrospective investigation.

A model for measurement of noise in CCD digital-video cameras

International Nuclear Information System (INIS)

Irie, K; Woodhead, I M; McKinnon, A E; Unsworth, K

2008-01-01

This study presents a comprehensive measurement of CCD digital-video camera noise. Knowledge of noise detail within images or video streams allows for the development of more sophisticated algorithms for separating true image content from the noise generated in an image sensor. The robustness and performance of an image-processing algorithm is fundamentally limited by sensor noise. The individual noise sources present in CCD sensors are well understood, but there has been little literature on the development of a complete noise model for CCD digital-video cameras, incorporating the effects of quantization and demosaicing

video115_0403 -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

Advantages of computer cameras over video cameras/frame grabbers for high-speed vision applications

Science.gov (United States)

Olson, Gaylord G.; Walker, Jo N.

1997-09-01

Cameras designed to work specifically with computers can have certain advantages in comparison to the use of cameras loosely defined as 'video' cameras. In recent years the camera type distinctions have become somewhat blurred, with a great presence of 'digital cameras' aimed more at the home markets. This latter category is not considered here. The term 'computer camera' herein is intended to mean one which has low level computer (and software) control of the CCD clocking. These can often be used to satisfy some of the more demanding machine vision tasks, and in some cases with a higher rate of measurements than video cameras. Several of these specific applications are described here, including some which use recently designed CCDs which offer good combinations of parameters such as noise, speed, and resolution. Among the considerations for the choice of camera type in any given application would be such effects as 'pixel jitter,' and 'anti-aliasing.' Some of these effects may only be relevant if there is a mismatch between the number of pixels per line in the camera CCD and the number of analog to digital (A/D) sampling points along a video scan line. For the computer camera case these numbers are guaranteed to match, which alleviates some measurement inaccuracies and leads to higher effective resolution.

Robust Video Stabilization Using Particle Keypoint Update and l1-Optimized Camera Path

Directory of Open Access Journals (Sweden)

Semi Jeon

2017-02-01

Full Text Available Acquisition of stabilized video is an important issue for various type of digital cameras. This paper presents an adaptive camera path estimation method using robust feature detection to remove shaky artifacts in a video. The proposed algorithm consists of three steps: (i robust feature detection using particle keypoints between adjacent frames; (ii camera path estimation and smoothing; and (iii rendering to reconstruct a stabilized video. As a result, the proposed algorithm can estimate the optimal homography by redefining important feature points in the flat region using particle keypoints. In addition, stabilized frames with less holes can be generated from the optimal, adaptive camera path that minimizes a temporal total variation (TV. The proposed video stabilization method is suitable for enhancing the visual quality for various portable cameras and can be applied to robot vision, driving assistant systems, and visual surveillance systems.

Acceptance/operational test procedure 241-AN-107 Video Camera System

International Nuclear Information System (INIS)

Pedersen, L.T.

1994-01-01

This procedure will document the satisfactory operation of the 241-AN-107 Video Camera System. The camera assembly, including camera mast, pan-and-tilt unit, camera, and lights, will be installed in Tank 241-AN-107 to monitor activities during the Caustic Addition Project. The camera focus, zoom, and iris remote controls will be functionally tested. The resolution and color rendition of the camera will be verified using standard reference charts. The pan-and-tilt unit will be tested for required ranges of motion, and the camera lights will be functionally tested. The master control station equipment, including the monitor, VCRs, printer, character generator, and video micrometer will be set up and performance tested in accordance with original equipment manufacturer's specifications. The accuracy of the video micrometer to measure objects in the range of 0.25 inches to 67 inches will be verified. The gas drying distribution system will be tested to ensure that a drying gas can be flowed over the camera and lens in the event that condensation forms on these components. This test will be performed by attaching the gas input connector, located in the upper junction box, to a pressurized gas supply and verifying that the check valve, located in the camera housing, opens to exhaust the compressed gas. The 241-AN-107 camera system will also be tested to assure acceptable resolution of the camera imaging components utilizing the camera system lights

Semantic Information Extraction of Lanes Based on Onboard Camera Videos

Science.gov (United States)

Tang, L.; Deng, T.; Ren, C.

2018-04-01

In the field of autonomous driving, semantic information of lanes is very important. This paper proposes a method of automatic detection of lanes and extraction of semantic information from onboard camera videos. The proposed method firstly detects the edges of lanes by the grayscale gradient direction, and improves the Probabilistic Hough transform to fit them; then, it uses the vanishing point principle to calculate the lane geometrical position, and uses lane characteristics to extract lane semantic information by the classification of decision trees. In the experiment, 216 road video images captured by a camera mounted onboard a moving vehicle were used to detect lanes and extract lane semantic information. The results show that the proposed method can accurately identify lane semantics from video images.

video114_0402c -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vesselTatoosh during August 2005. Video data from...

video114_0402b -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

Engineering task plan for flammable gas atmosphere mobile color video camera systems

International Nuclear Information System (INIS)

Kohlman, E.H.

1995-01-01

This Engineering Task Plan (ETP) describes the design, fabrication, assembly, and testing of the mobile video camera systems. The color video camera systems will be used to observe and record the activities within the vapor space of a tank on a limited exposure basis. The units will be fully mobile and designed for operation in the single-shell flammable gas producing tanks. The objective of this tank is to provide two mobile camera systems for use in flammable gas producing single-shell tanks (SSTs) for the Flammable Gas Tank Safety Program. The camera systems will provide observation, video recording, and monitoring of the activities that occur in the vapor space of applied tanks. The camera systems will be designed to be totally mobile, capable of deployment up to 6.1 meters into a 4 inch (minimum) riser

Real-time pedestrian detection with the videos of car camera

Directory of Open Access Journals (Sweden)

Yunling Zhang

2015-12-01

Full Text Available Pedestrians in the vehicle path are in danger of being hit, thus causing severe injury to pedestrians and vehicle occupants. Therefore, real-time pedestrian detection with the video of vehicle-mounted camera is of great significance to vehicle–pedestrian collision warning and traffic safety of self-driving car. In this article, a real-time scheme was proposed based on integral channel features and graphics processing unit. The proposed method does not need to resize the input image. Moreover, the computationally expensive convolution of the detectors and the input image was converted into the dot product of two larger matrixes, which can be computed effectively using a graphics processing unit. The experiments showed that the proposed method could be employed to detect pedestrians in the video of car camera at 20+ frames per second with acceptable error rates. Thus, it can be applied in real-time detection tasks with the videos of car camera.

GoPro Hero Cameras for Creation of a Three-Dimensional, Educational, Neurointerventional Video.

Science.gov (United States)

Park, Min S; Brock, Andrea; Mortimer, Vance; Taussky, Philipp; Couldwell, William T; Quigley, Edward

2017-10-01

Neurointerventional education relies on an apprenticeship model, with the trainee observing and participating in procedures with the guidance of a mentor. While educational videos are becoming prevalent in surgical cases, there is a dearth of comparable educational material for trainees in neurointerventional programs. We sought to create a high-quality, three-dimensional video of a routine diagnostic cerebral angiogram for use as an educational tool. A diagnostic cerebral angiogram was recorded using two GoPro HERO 3+ cameras with the Dual HERO System to capture the proceduralist's hands during the case. This video was edited with recordings from the video monitors to create a real-time three-dimensional video of both the actions of the neurointerventionalist and the resulting wire/catheter movements. The final edited video, in either two or three dimensions, can serve as another instructional tool for the training of residents and/or fellows. Additional videos can be created in a similar fashion of more complicated neurointerventional cases. The GoPro HERO 3+ camera and Dual HERO System can be used to create educational videos of neurointerventional procedures.

Non-mydriatic, wide field, fundus video camera

Science.gov (United States)

Hoeher, Bernhard; Voigtmann, Peter; Michelson, Georg; Schmauss, Bernhard

2014-02-01

We describe a method we call "stripe field imaging" that is capable of capturing wide field color fundus videos and images of the human eye at pupil sizes of 2mm. This means that it can be used with a non-dilated pupil even with bright ambient light. We realized a mobile demonstrator to prove the method and we could acquire color fundus videos of subjects successfully. We designed the demonstrator as a low-cost device consisting of mass market components to show that there is no major additional technical outlay to realize the improvements we propose. The technical core idea of our method is breaking the rotational symmetry in the optical design that is given in many conventional fundus cameras. By this measure we could extend the possible field of view (FOV) at a pupil size of 2mm from a circular field with 20° in diameter to a square field with 68° by 18° in size. We acquired a fundus video while the subject was slightly touching and releasing the lid. The resulting video showed changes at vessels in the region of the papilla and a change of the paleness of the papilla.

Identifying sports videos using replay, text, and camera motion features

Science.gov (United States)

Kobla, Vikrant; DeMenthon, Daniel; Doermann, David S.

1999-12-01

Automated classification of digital video is emerging as an important piece of the puzzle in the design of content management systems for digital libraries. The ability to classify videos into various classes such as sports, news, movies, or documentaries, increases the efficiency of indexing, browsing, and retrieval of video in large databases. In this paper, we discuss the extraction of features that enable identification of sports videos directly from the compressed domain of MPEG video. These features include detecting the presence of action replays, determining the amount of scene text in vide, and calculating various statistics on camera and/or object motion. The features are derived from the macroblock, motion,and bit-rate information that is readily accessible from MPEG video with very minimal decoding, leading to substantial gains in processing speeds. Full-decoding of selective frames is required only for text analysis. A decision tree classifier built using these features is able to identify sports clips with an accuracy of about 93 percent.

A video authentication technique

International Nuclear Information System (INIS)

Johnson, C.S.

1987-01-01

Unattended video surveillance systems are particularly vulnerable to the substitution of false video images into the cable that connects the camera to the video recorder. New technology has made it practical to insert a solid state video memory into the video cable, freeze a video image from the camera, and hold this image as long as desired. Various techniques, such as line supervision and sync detection, have been used to detect video cable tampering. The video authentication technique described in this paper uses the actual video image from the camera as the basis for detecting any image substitution made during the transmission of the video image to the recorder. The technique, designed for unattended video systems, can be used for any video transmission system where a two-way digital data link can be established. The technique uses similar microprocessor circuitry at the video camera and at the video recorder to select sample points in the video image for comparison. The gray scale value of these points is compared at the recorder controller and if the values agree within limits, the image is authenticated. If a significantly different image was substituted, the comparison would fail at a number of points and the video image would not be authenticated. The video authentication system can run as a stand-alone system or at the request of another system

Surgical video recording with a modified GoPro Hero 4 camera.

Science.gov (United States)

Lin, Lily Koo

2016-01-01

Surgical videography can provide analytical self-examination for the surgeon, teaching opportunities for trainees, and allow for surgical case presentations. This study examined if a modified GoPro Hero 4 camera with a 25 mm lens could prove to be a cost-effective method of surgical videography with enough detail for oculoplastic and strabismus surgery. The stock lens mount and lens were removed from a GoPro Hero 4 camera, and was refitted with a Peau Productions SuperMount and 25 mm lens. The modified GoPro Hero 4 camera was then fixed to an overhead surgical light. Camera settings were set to 1080p video resolution. The 25 mm lens allowed for nine times the magnification as the GoPro stock lens. There was no noticeable video distortion. The entire cost was less than 600 USD. The adapted GoPro Hero 4 with a 25 mm lens allows for high-definition, cost-effective, portable video capture of oculoplastic and strabismus surgery. The 25 mm lens allows for detailed videography that can enhance surgical teaching and self-examination.

Flip Video for Dummies

CERN Document Server

Hutsko, Joe

2010-01-01

The full-color guide to shooting great video with the Flip Video camera. The inexpensive Flip Video camera is currently one of the hottest must-have gadgets. It's portable and connects easily to any computer to transfer video you shoot onto your PC or Mac. Although the Flip Video camera comes with a quick-start guide, it lacks a how-to manual, and this full-color book fills that void! Packed with full-color screen shots throughout, Flip Video For Dummies shows you how to shoot the best possible footage in a variety of situations. You'll learn how to transfer video to your computer and then edi

Field Test Data for Detecting Vibrations of a Building Using High-Speed Video Cameras

Science.gov (United States)

2017-10-01

ARL-TR-8185 ● OCT 2017 US Army Research Laboratory Field Test Data for Detecting Vibrations of a Building Using High-Speed Video...Field Test Data for Detecting Vibrations of a Building Using High-Speed Video Cameras by Caitlin P Conn and Geoffrey H Goldman Sensors and...June 2016 – October 2017 4. TITLE AND SUBTITLE Field Test Data for Detecting Vibrations of a Building Using High-Speed Video Cameras 5a. CONTRACT

Candid camera : video surveillance system can help protect assets

Energy Technology Data Exchange (ETDEWEB)

Harrison, L.

2009-11-15

By combining closed-circuit cameras with sophisticated video analytics to create video sensors for use in remote areas, Calgary-based IntelliView Technologies Inc.'s explosion-proof video surveillance system can help the oil and gas sector monitor its assets. This article discussed the benefits, features, and applications of IntelliView's technology. Some of the benefits include a reduced need for on-site security and operating personnel and its patented analytics product known as the SmrtDVR, where the camera's images are stored. The technology can be used in temperatures as cold as minus 50 degrees Celsius and as high as 50 degrees Celsius. The product was commercialized in 2006 when it was used by Nexen Inc. It was concluded that false alarms set off by natural occurrences such as rain, snow, glare and shadows were a huge problem with analytics in the past, but that problem has been solved by IntelliView, which has its own source code, and re-programmed code. 1 fig.

Advances in top-down and bottom-up approaches to video-based camera tracking

OpenAIRE

Marimón Sanjuán, David

2007-01-01

Video-based camera tracking consists in trailing the three dimensional pose followed by a mobile camera using video as sole input. In order to estimate the pose of a camera with respect to a real scene, one or more three dimensional references are needed. Examples of such references are landmarks with known geometric shape, or objects for which a model is generated beforehand. By comparing what is seen by a camera with what is geometrically known from reality, it is possible to recover the po...

Advances in top-down and bottom-up approaches to video-based camera tracking

OpenAIRE

Marimón Sanjuán, David; Ebrahimi, Touradj

2008-01-01

Video-based camera tracking consists in trailing the three dimensional pose followed by a mobile camera using video as sole input. In order to estimate the pose of a camera with respect to a real scene, one or more three dimensional references are needed. Examples of such references are landmarks with known geometric shape, or objects for which a model is generated beforehand. By comparing what is seen by a camera with what is geometrically known from reality, it is possible to recover the po...

In-camera video-stream processing for bandwidth reduction in web inspection

Science.gov (United States)

Jullien, Graham A.; Li, QiuPing; Hajimowlana, S. Hossain; Morvay, J.; Conflitti, D.; Roberts, James W.; Doody, Brian C.

1996-02-01

Automated machine vision systems are now widely used for industrial inspection tasks where video-stream data information is taken in by the camera and then sent out to the inspection system for future processing. In this paper we describe a prototype system for on-line programming of arbitrary real-time video data stream bandwidth reduction algorithms; the output of the camera only contains information that has to be further processed by a host computer. The processing system is built into a DALSA CCD camera and uses a microcontroller interface to download bit-stream data to a XILINXTM FPGA. The FPGA is directly connected to the video data-stream and outputs data to a low bandwidth output bus. The camera communicates to a host computer via an RS-232 link to the microcontroller. Static memory is used to both generate a FIFO interface for buffering defect burst data, and for off-line examination of defect detection data. In addition to providing arbitrary FPGA architectures, the internal program of the microcontroller can also be changed via the host computer and a ROM monitor. This paper describes a prototype system board, mounted inside a DALSA camera, and discusses some of the algorithms currently being implemented for web inspection applications.

ALGORITHM OF PLACEMENT OF VIDEO SURVEILLANCE CAMERAS AND ITS SOFTWARE IMPLEMENTATION

Directory of Open Access Journals (Sweden)

Loktev Alexey Alexeevich

2012-10-01

Full Text Available Comprehensive distributed safety, control, and monitoring systems applied by companies and organizations of different ownership structure play a substantial role in the present-day society. Video surveillance elements that ensure image processing and decision making in automated or automatic modes are the essential components of new systems. This paper covers the modeling of video surveillance systems installed in buildings, and the algorithm, or pattern, of video camera placement with due account for nearly all characteristics of buildings, detection and recognition facilities, and cameras themselves. This algorithm will be subsequently implemented as a user application. The project contemplates a comprehensive approach to the automatic placement of cameras that take account of their mutual positioning and compatibility of tasks. The project objective is to develop the principal elements of the algorithm of recognition of a moving object to be detected by several cameras. The image obtained by different cameras will be processed. Parameters of motion are to be identified to develop a table of possible options of routes. The implementation of the recognition algorithm represents an independent research project to be covered by a different article. This project consists in the assessment of the degree of complexity of an algorithm of camera placement designated for identification of cases of inaccurate algorithm implementation, as well as in the formulation of supplementary requirements and input data by means of intercrossing sectors covered by neighbouring cameras. The project also contemplates identification of potential problems in the course of development of a physical security and monitoring system at the stage of the project design development and testing. The camera placement algorithm has been implemented as a software application that has already been pilot tested on buildings and inside premises that have irregular dimensions. The

Video Comparator

International Nuclear Information System (INIS)

Rose, R.P.

1978-01-01

The Video Comparator is a comparative gage that uses electronic images from two sources, a standard and an unknown. Two matched video cameras are used to obtain the electronic images. The video signals are mixed and displayed on a single video receiver (CRT). The video system is manufactured by ITP of Chatsworth, CA and is a Tele-Microscope II, Model 148. One of the cameras is mounted on a toolmaker's microscope stand and produces a 250X image of a cast. The other camera is mounted on a stand and produces an image of a 250X template. The two video images are mixed in a control box provided by ITP and displayed on a CRT. The template or the cast can be moved to align the desired features. Vertical reference lines are provided on the CRT, and a feature on the cast can be aligned with a line on the CRT screen. The stage containing the casts can be moved using a Boeckleler micrometer equipped with a digital readout, and a second feature aligned with the reference line and the distance moved obtained from the digital display

Development and setting of a time-lapse video camera system for the Antarctic lake observation

Directory of Open Access Journals (Sweden)

Sakae Kudoh

2010-11-01

Full Text Available A submersible video camera system, which aimed to record the growth image of aquatic vegetation in Antarctic lakes for one year, was manufactured. The system consisted of a video camera, a programmable controller unit, a lens-cleaning wiper with a submersible motor, LED lights, and a lithium ion battery unit. Changes of video camera (High Vision System and modification of the lens-cleaning wiper allowed higher sensitivity and clearer recording images compared to the previous submersible video without increasing the power consumption. This system was set on the lake floor in Lake Naga Ike (a tentative name in Skarvsnes in Soya Coast, during the summer activity of the 51th Japanese Antarctic Research Expedition. Interval record of underwater visual image for one year have been started by our diving operation.

Video microblogging

DEFF Research Database (Denmark)

Bornoe, Nis; Barkhuus, Louise

2010-01-01

Microblogging is a recently popular phenomenon and with the increasing trend for video cameras to be built into mobile phones, a new type of microblogging has entered the arena of electronic communication: video microblogging. In this study we examine video microblogging, which is the broadcasting...... of short videos. A series of semi-structured interviews offers an understanding of why and how video microblogging is used and what the users post and broadcast....

Surgical video recording with a modified GoPro Hero 4 camera

Directory of Open Access Journals (Sweden)

Lin LK

2016-01-01

Full Text Available Lily Koo Lin Department of Ophthalmology and Vision Science, University of California, Davis Eye Center, Sacramento, CA, USA Background: Surgical videography can provide analytical self-examination for the surgeon, teaching opportunities for trainees, and allow for surgical case presentations. This study examined if a modified GoPro Hero 4 camera with a 25 mm lens could prove to be a cost-effective method of surgical videography with enough detail for oculoplastic and strabismus surgery. Method: The stock lens mount and lens were removed from a GoPro Hero 4 camera, and was refitted with a Peau Productions SuperMount and 25 mm lens. The modified GoPro Hero 4 camera was then fixed to an overhead surgical light. Results: Camera settings were set to 1080p video resolution. The 25 mm lens allowed for nine times the magnification as the GoPro stock lens. There was no noticeable video distortion. The entire cost was less than 600 USD. Conclusion: The adapted GoPro Hero 4 with a 25 mm lens allows for high-definition, cost-effective, portable video capture of oculoplastic and strabismus surgery. The 25 mm lens allows for detailed videography that can enhance surgical teaching and self-examination. Keywords: teaching, oculoplastic, strabismus

ATR/OTR-SY Tank Camera Purge System and in Tank Color Video Imaging System

International Nuclear Information System (INIS)

Werry, S.M.

1995-01-01

This procedure will document the satisfactory operation of the 101-SY tank Camera Purge System (CPS) and 101-SY in tank Color Camera Video Imaging System (CCVIS). Included in the CPRS is the nitrogen purging system safety interlock which shuts down all the color video imaging system electronics within the 101-SY tank vapor space during loss of nitrogen purge pressure

An evaluation of video cameras for collecting observational data on sanctuary-housed chimpanzees (Pan troglodytes).

Science.gov (United States)

Hansen, Bethany K; Fultz, Amy L; Hopper, Lydia M; Ross, Stephen R

2018-05-01

Video cameras are increasingly being used to monitor captive animals in zoo, laboratory, and agricultural settings. This technology may also be useful in sanctuaries with large and/or complex enclosures. However, the cost of camera equipment and a lack of formal evaluations regarding the use of cameras in sanctuary settings make it challenging for facilities to decide whether and how to implement this technology. To address this, we evaluated the feasibility of using a video camera system to monitor chimpanzees at Chimp Haven. We viewed a group of resident chimpanzees in a large forested enclosure and compared observations collected in person and with remote video cameras. We found that via camera, the observer viewed fewer chimpanzees in some outdoor locations (GLMM post hoc test: est. = 1.4503, SE = 0.1457, Z = 9.951, p sanctuaries to facilitate animal care and observational research. © 2018 Wiley Periodicals, Inc.

Teacher training for using digital video camera in primary education

Directory of Open Access Journals (Sweden)

Pablo García Sempere

2011-12-01

Full Text Available This paper shows the partial results of a research carried out in primary schools, which evaluates the ability of teachers in the use of digital video camera. The study took place in the province of Granada, Spain. Our purpose was to know the level of knowledge, interest, difficulties and training needs so as to improve the teaching practice. The work has been done from a descriptive and ecletic approach. Quantitative (questionnaire and qualitative techniques (focus group have been used in this research. The information obtained shows that most of the teachers have a lack of knowledge in the use of video camera and digital edition. On the other hand, the majority agrees to include initial and permanent training on this subject. Finally, the most important conclusions are presented.

Guerrilla Video: A New Protocol for Producing Classroom Video

Science.gov (United States)

Fadde, Peter; Rich, Peter

2010-01-01

Contemporary changes in pedagogy point to the need for a higher level of video production value in most classroom video, replacing the default video protocol of an unattended camera in the back of the classroom. The rich and complex environment of today's classroom can be captured more fully using the higher level, but still easily manageable,…

Localization of cask and plug remote handling system in ITER using multiple video cameras

Energy Technology Data Exchange (ETDEWEB)

Ferreira, João, E-mail: jftferreira@ipfn.ist.utl.pt [Instituto de Plasmas e Fusão Nuclear - Laboratório Associado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Vale, Alberto [Instituto de Plasmas e Fusão Nuclear - Laboratório Associado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Ribeiro, Isabel [Laboratório de Robótica e Sistemas em Engenharia e Ciência - Laboratório Associado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal)

2013-10-15

Highlights: ► Localization of cask and plug remote handling system with video cameras and markers. ► Video cameras already installed on the building for remote operators. ► Fiducial markers glued or painted on cask and plug remote handling system. ► Augmented reality contents on the video streaming as an aid for remote operators. ► Integration with other localization systems for enhanced robustness and precision. -- Abstract: The cask and plug remote handling system (CPRHS) provides the means for the remote transfer of in-vessel components and remote handling equipment between the Hot Cell building and the Tokamak building in ITER. Different CPRHS typologies will be autonomously guided following predefined trajectories. Therefore, the localization of any CPRHS in operation must be continuously known in real time to provide the feedback for the control system and also for the human supervision. This paper proposes a localization system that uses the video streaming captured by the multiple cameras already installed in the ITER scenario to estimate with precision the position and the orientation of any CPRHS. In addition, an augmented reality system can be implemented using the same video streaming and the libraries for the localization system. The proposed localization system was tested in a mock-up scenario with a scale 1:25 of the divertor level of Tokamak building.

Localization of cask and plug remote handling system in ITER using multiple video cameras

International Nuclear Information System (INIS)

Ferreira, João; Vale, Alberto; Ribeiro, Isabel

2013-01-01

Highlights: ► Localization of cask and plug remote handling system with video cameras and markers. ► Video cameras already installed on the building for remote operators. ► Fiducial markers glued or painted on cask and plug remote handling system. ► Augmented reality contents on the video streaming as an aid for remote operators. ► Integration with other localization systems for enhanced robustness and precision. -- Abstract: The cask and plug remote handling system (CPRHS) provides the means for the remote transfer of in-vessel components and remote handling equipment between the Hot Cell building and the Tokamak building in ITER. Different CPRHS typologies will be autonomously guided following predefined trajectories. Therefore, the localization of any CPRHS in operation must be continuously known in real time to provide the feedback for the control system and also for the human supervision. This paper proposes a localization system that uses the video streaming captured by the multiple cameras already installed in the ITER scenario to estimate with precision the position and the orientation of any CPRHS. In addition, an augmented reality system can be implemented using the same video streaming and the libraries for the localization system. The proposed localization system was tested in a mock-up scenario with a scale 1:25 of the divertor level of Tokamak building

Deep video deblurring

KAUST Repository

Su, Shuochen

2016-11-25

Motion blur from camera shake is a major problem in videos captured by hand-held devices. Unlike single-image deblurring, video-based approaches can take advantage of the abundant information that exists across neighboring frames. As a result the best performing methods rely on aligning nearby frames. However, aligning images is a computationally expensive and fragile procedure, and methods that aggregate information must therefore be able to identify which regions have been accurately aligned and which have not, a task which requires high level scene understanding. In this work, we introduce a deep learning solution to video deblurring, where a CNN is trained end-to-end to learn how to accumulate information across frames. To train this network, we collected a dataset of real videos recorded with a high framerate camera, which we use to generate synthetic motion blur for supervision. We show that the features learned from this dataset extend to deblurring motion blur that arises due to camera shake in a wide range of videos, and compare the quality of results to a number of other baselines.

Engineering task plan for Tanks 241-AN-103, 104, 105 color video camera systems

International Nuclear Information System (INIS)

Kohlman, E.H.

1994-01-01

This Engineering Task Plan (ETP) describes the design, fabrication, assembly, and installation of the video camera systems into the vapor space within tanks 241-AN-103, 104, and 105. The one camera remotely operated color video systems will be used to observe and record the activities within the vapor space. Activities may include but are not limited to core sampling, auger activities, crust layer examination, monitoring of equipment installation/removal, and any other activities. The objective of this task is to provide a single camera system in each of the tanks for the Flammable Gas Tank Safety Program

Normalized Metadata Generation for Human Retrieval Using Multiple Video Surveillance Cameras

Directory of Open Access Journals (Sweden)

Jaehoon Jung

2016-06-01

Full Text Available Since it is impossible for surveillance personnel to keep monitoring videos from a multiple camera-based surveillance system, an efficient technique is needed to help recognize important situations by retrieving the metadata of an object-of-interest. In a multiple camera-based surveillance system, an object detected in a camera has a different shape in another camera, which is a critical issue of wide-range, real-time surveillance systems. In order to address the problem, this paper presents an object retrieval method by extracting the normalized metadata of an object-of-interest from multiple, heterogeneous cameras. The proposed metadata generation algorithm consists of three steps: (i generation of a three-dimensional (3D human model; (ii human object-based automatic scene calibration; and (iii metadata generation. More specifically, an appropriately-generated 3D human model provides the foot-to-head direction information that is used as the input of the automatic calibration of each camera. The normalized object information is used to retrieve an object-of-interest in a wide-range, multiple-camera surveillance system in the form of metadata. Experimental results show that the 3D human model matches the ground truth, and automatic calibration-based normalization of metadata enables a successful retrieval and tracking of a human object in the multiple-camera video surveillance system.

A passive terahertz video camera based on lumped element kinetic inductance detectors

Energy Technology Data Exchange (ETDEWEB)

Rowe, Sam, E-mail: sam.rowe@astro.cf.ac.uk; Pascale, Enzo; Doyle, Simon; Dunscombe, Chris; Hargrave, Peter; Papageorgio, Andreas; Ade, Peter A. R.; Barry, Peter; Bideaud, Aurélien; Brien, Tom; Dodd, Chris; House, Julian; Moseley, Paul; Sudiwala, Rashmi; Tucker, Carole; Walker, Ian [Astronomy Instrumentation Group, School of Physics and Astronomy, Cardiff University, Cardiff CF24 3AA (United Kingdom); Wood, Ken [QMC Instruments Ltd., School of Physics and Astronomy, Cardiff University, Cardiff CF24 3AA (United Kingdom); Grainger, William [Rutherford Appleton Laboratory, STFC, Swindon SN2 1SZ (United Kingdom); Mauskopf, Philip [Astronomy Instrumentation Group, School of Physics and Astronomy, Cardiff University, Cardiff CF24 3AA (United Kingdom); School of Earth Science and Space Exploration, Arizona State University, Tempe, Arizona 85281 (United States); Spencer, Locke [Department of Physics and Astronomy, University of Lethbridge, Lethbridge, Alberta T1K 3M4 (Canada)

2016-03-15

We have developed a passive 350 GHz (850 μm) video-camera to demonstrate lumped element kinetic inductance detectors (LEKIDs)—designed originally for far-infrared astronomy—as an option for general purpose terrestrial terahertz imaging applications. The camera currently operates at a quasi-video frame rate of 2 Hz with a noise equivalent temperature difference per frame of ∼0.1 K, which is close to the background limit. The 152 element superconducting LEKID array is fabricated from a simple 40 nm aluminum film on a silicon dielectric substrate and is read out through a single microwave feedline with a cryogenic low noise amplifier and room temperature frequency domain multiplexing electronics.

A passive terahertz video camera based on lumped element kinetic inductance detectors

International Nuclear Information System (INIS)

Rowe, Sam; Pascale, Enzo; Doyle, Simon; Dunscombe, Chris; Hargrave, Peter; Papageorgio, Andreas; Ade, Peter A. R.; Barry, Peter; Bideaud, Aurélien; Brien, Tom; Dodd, Chris; House, Julian; Moseley, Paul; Sudiwala, Rashmi; Tucker, Carole; Walker, Ian; Wood, Ken; Grainger, William; Mauskopf, Philip; Spencer, Locke

2016-01-01

We have developed a passive 350 GHz (850 μm) video-camera to demonstrate lumped element kinetic inductance detectors (LEKIDs)—designed originally for far-infrared astronomy—as an option for general purpose terrestrial terahertz imaging applications. The camera currently operates at a quasi-video frame rate of 2 Hz with a noise equivalent temperature difference per frame of ∼0.1 K, which is close to the background limit. The 152 element superconducting LEKID array is fabricated from a simple 40 nm aluminum film on a silicon dielectric substrate and is read out through a single microwave feedline with a cryogenic low noise amplifier and room temperature frequency domain multiplexing electronics.

Real-time construction and visualisation of drift-free video mosaics from unconstrained camera motion

Directory of Open Access Journals (Sweden)

Mateusz Brzeszcz

2015-08-01

Full Text Available This work proposes a novel approach for real-time video mosaicking facilitating drift-free mosaic construction and visualisation, with integrated frame blending and redundancy management, that is shown to be flexible to a range of varying mosaic scenarios. The approach supports unconstrained camera motion with in-sequence loop closing, variation in camera focal distance (zoom and recovery from video sequence breaks. Real-time performance, over extended duration sequences, is realised via novel aspects of frame management within the mosaic representation and thus avoiding the high data redundancy associated with temporally dense, spatially overlapping video frame inputs. This managed set of image frames is visualised in real time using a dynamic mosaic representation of overlapping textured graphics primitives in place of the traditional globally constructed, and hence frequently reconstructed, mosaic image. Within this formulation, subsequent optimisation occurring during online construction can thus efficiency adjust relative frame positions via simple primitive position transforms. Effective visualisation is similarly facilitated by online inter-frame blending to overcome the illumination and colour variance associated with modern camera hardware. The evaluation illustrates overall robustness in video mosaic construction under a diverse range of conditions including indoor and outdoor environments, varying illumination and presence of in-scene motion on varying computational platforms.

Euratom experience with video surveillance - Single camera and other non-multiplexed

International Nuclear Information System (INIS)

Otto, P.; Cozier, T.; Jargeac, B.; Castets, J.P.; Wagner, H.G.; Chare, P.; Roewer, V.

1991-01-01

The Euratom Safeguards Directorate (ESD) has been using a number of single camera video systems (Ministar, MIVS, DCS) and non-multiplexed multi-camera systems (Digiquad) for routine safeguards surveillance applications during the last four years. This paper describes aspects of system design and considerations relevant for installation. It reports on system reliability and performance and presents suggestions on future improvements

Video Liveness for Citizen Journalism: Attacks and Defenses

OpenAIRE

Rahman, Mahmudur; Azimpourkivi, Mozhgan; Topkara, Umut; Carbunar, Bogdan

2017-01-01

The impact of citizen journalism raises important video integrity and credibility issues. In this article, we introduce Vamos, the first user transparent video "liveness" verification solution based on video motion, that accommodates the full range of camera movements, and supports videos of arbitrary length. Vamos uses the agreement between video motion and camera movement to corroborate the video authenticity. Vamos can be integrated into any mobile video capture application without requiri...

A Comparison of Techniques for Camera Selection and Hand-Off in a Video Network

Science.gov (United States)

Li, Yiming; Bhanu, Bir

Video networks are becoming increasingly important for solving many real-world problems. Multiple video sensors require collaboration when performing various tasks. One of the most basic tasks is the tracking of objects, which requires mechanisms to select a camera for a certain object and hand-off this object from one camera to another so as to accomplish seamless tracking. In this chapter, we provide a comprehensive comparison of current and emerging camera selection and hand-off techniques. We consider geometry-, statistics-, and game theory-based approaches and provide both theoretical and experimental comparison using centralized and distributed computational models. We provide simulation and experimental results using real data for various scenarios of a large number of cameras and objects for in-depth understanding of strengths and weaknesses of these techniques.

A Method for Estimating Surveillance Video Georeferences

Directory of Open Access Journals (Sweden)

Aleksandar Milosavljević

2017-07-01

Full Text Available The integration of a surveillance camera video with a three-dimensional (3D geographic information system (GIS requires the georeferencing of that video. Since a video consists of separate frames, each frame must be georeferenced. To georeference a video frame, we rely on the information about the camera view at the moment that the frame was captured. A camera view in 3D space is completely determined by the camera position, orientation, and field-of-view. Since the accurate measuring of these parameters can be extremely difficult, in this paper we propose a method for their estimation based on matching video frame coordinates of certain point features with their 3D geographic locations. To obtain these coordinates, we rely on high-resolution orthophotos and digital elevation models (DEM of the area of interest. Once an adequate number of points are matched, Levenberg–Marquardt iterative optimization is applied to find the most suitable video frame georeference, i.e., position and orientation of the camera.

Advances in pediatric gastroenterology: introducing video camera capsule endoscopy.

Science.gov (United States)

Siaw, Emmanuel O

2006-04-01

The video camera capsule endoscope is a gastrointestinal endoscope approved by the U.S. Food and Drug Administration in 2001 for use in diagnosing gastrointestinal disorders in adults. In 2003, the agency approved the device for use in children ages 10 and older, and the endoscope is currently in use at Arkansas Children's Hospital. A capsule camera, lens, battery, transmitter and antenna together record images of the small intestine as the endoscope makes its way through the bowel. The instrument is used with minimal risk to the patient while offering a high degree of accuracy in diagnosing small intestine disorders.

Physics and Video Analysis

Science.gov (United States)

Allain, Rhett

2016-05-01

We currently live in a world filled with videos. There are videos on YouTube, feature movies and even videos recorded with our own cameras and smartphones. These videos present an excellent opportunity to not only explore physical concepts, but also inspire others to investigate physics ideas. With video analysis, we can explore the fantasy world in science-fiction films. We can also look at online videos to determine if they are genuine or fake. Video analysis can be used in the introductory physics lab and it can even be used to explore the make-believe physics embedded in video games. This book covers the basic ideas behind video analysis along with the fundamental physics principles used in video analysis. The book also includes several examples of the unique situations in which video analysis can be used.

Advanced real-time manipulation of video streams

CERN Document Server

Herling, Jan

2014-01-01

Diminished Reality is a new fascinating technology that removes real-world content from live video streams. This sensational live video manipulation actually removes real objects and generates a coherent video stream in real-time. Viewers cannot detect modified content. Existing approaches are restricted to moving objects and static or almost static cameras and do not allow real-time manipulation of video content. Jan Herling presents a new and innovative approach for real-time object removal with arbitrary camera movements.

Video auto stitching in multicamera surveillance system

Science.gov (United States)

He, Bin; Zhao, Gang; Liu, Qifang; Li, Yangyang

2012-01-01

This paper concerns the problem of video stitching automatically in a multi-camera surveillance system. Previous approaches have used multiple calibrated cameras for video mosaic in large scale monitoring application. In this work, we formulate video stitching as a multi-image registration and blending problem, and not all cameras are needed to be calibrated except a few selected master cameras. SURF is used to find matched pairs of image key points from different cameras, and then camera pose is estimated and refined. Homography matrix is employed to calculate overlapping pixels and finally implement boundary resample algorithm to blend images. The result of simulation demonstrates the efficiency of our method.

Camera Networks The Acquisition and Analysis of Videos over Wide Areas

CERN Document Server

Roy-Chowdhury, Amit K

2012-01-01

As networks of video cameras are installed in many applications like security and surveillance, environmental monitoring, disaster response, and assisted living facilities, among others, image understanding in camera networks is becoming an important area of research and technology development. There are many challenges that need to be addressed in the process. Some of them are listed below: - Traditional computer vision challenges in tracking and recognition, robustness to pose, illumination, occlusion, clutter, recognition of objects, and activities; - Aggregating local information for wide

Automatic video segmentation employing object/camera modeling techniques

NARCIS (Netherlands)

Farin, D.S.

2005-01-01

Practically established video compression and storage techniques still process video sequences as rectangular images without further semantic structure. However, humans watching a video sequence immediately recognize acting objects as semantic units. This semantic object separation is currently not

Mobile Video in Everyday Social Interactions

Science.gov (United States)

Reponen, Erika; Lehikoinen, Jaakko; Impiö, Jussi

Video recording has become a spontaneous everyday activity for many people, thanks to the video capabilities of modern mobile phones. Internet connectivity of mobile phones enables fluent sharing of captured material even real-time, which makes video an up-and-coming everyday interaction medium. In this article we discuss the effect of the video camera in the social environment, everyday life situations, mainly based on a study where four groups of people used digital video cameras in their normal settings. We also reflect on another study of ours, relating to real-time mobile video communication and discuss future views. The aim of our research is to understand the possibilities in the domain of mobile video. Live and delayed sharing seem to have their special characteristics, live video being used as a virtual window between places whereas delayed video usage has more scope for good-quality content. While this novel way of interacting via mobile video enables new social patterns, it also raises new concerns for privacy and trust between participating persons in all roles, largely due to the widely spreading possibilities of videos. Video in a social situation affects cameramen (who record), targets (who are recorded), passers-by (who are unintentionally in the situation), and the audience (who follow the videos or recording situations) but also the other way around, the participants affect the video by their varying and evolving personal and communicational motivations for recording.

Patterned Video Sensors For Low Vision

Science.gov (United States)

Juday, Richard D.

1996-01-01

Miniature video cameras containing photoreceptors arranged in prescribed non-Cartesian patterns to compensate partly for some visual defects proposed. Cameras, accompanied by (and possibly integrated with) miniature head-mounted video display units restore some visual function in humans whose visual fields reduced by defects like retinitis pigmentosa.

Surgeon point-of-view recording: Using a high-definition head-mounted video camera in the operating room

Directory of Open Access Journals (Sweden)

Akshay Gopinathan Nair

2015-01-01

Full Text Available Objective: To study the utility of a commercially available small, portable ultra-high definition (HD camera (GoPro Hero 4 for intraoperative recording. Methods: A head mount was used to fix the camera on the operating surgeon′s head. Due care was taken to protect the patient′s identity. The recorded video was subsequently edited and used as a teaching tool. This retrospective, noncomparative study was conducted at three tertiary eye care centers. The surgeries recorded were ptosis correction, ectropion correction, dacryocystorhinostomy, angular dermoid excision, enucleation, blepharoplasty and lid tear repair surgery (one each. The recorded videos were reviewed, edited, and checked for clarity, resolution, and reproducibility. Results: The recorded videos were found to be high quality, which allowed for zooming and visualization of the surgical anatomy clearly. Minimal distortion is a drawback that can be effectively addressed during postproduction. The camera, owing to its lightweight and small size, can be mounted on the surgeon′s head, thus offering a unique surgeon point-of-view. In our experience, the results were of good quality and reproducible. Conclusions: A head-mounted ultra-HD video recording system is a cheap, high quality, and unobtrusive technique to record surgery and can be a useful teaching tool in external facial and ophthalmic plastic surgery.

Surgeon point-of-view recording: Using a high-definition head-mounted video camera in the operating room.

Science.gov (United States)

Nair, Akshay Gopinathan; Kamal, Saurabh; Dave, Tarjani Vivek; Mishra, Kapil; Reddy, Harsha S; Della Rocca, David; Della Rocca, Robert C; Andron, Aleza; Jain, Vandana

2015-10-01

To study the utility of a commercially available small, portable ultra-high definition (HD) camera (GoPro Hero 4) for intraoperative recording. A head mount was used to fix the camera on the operating surgeon's head. Due care was taken to protect the patient's identity. The recorded video was subsequently edited and used as a teaching tool. This retrospective, noncomparative study was conducted at three tertiary eye care centers. The surgeries recorded were ptosis correction, ectropion correction, dacryocystorhinostomy, angular dermoid excision, enucleation, blepharoplasty and lid tear repair surgery (one each). The recorded videos were reviewed, edited, and checked for clarity, resolution, and reproducibility. The recorded videos were found to be high quality, which allowed for zooming and visualization of the surgical anatomy clearly. Minimal distortion is a drawback that can be effectively addressed during postproduction. The camera, owing to its lightweight and small size, can be mounted on the surgeon's head, thus offering a unique surgeon point-of-view. In our experience, the results were of good quality and reproducible. A head-mounted ultra-HD video recording system is a cheap, high quality, and unobtrusive technique to record surgery and can be a useful teaching tool in external facial and ophthalmic plastic surgery.

State of the art in video system performance

Science.gov (United States)

Lewis, Michael J.

1990-01-01

The closed circuit television (CCTV) system that is onboard the Space Shuttle has the following capabilities: camera, video signal switching and routing unit (VSU); and Space Shuttle video tape recorder. However, this system is inadequate for use with many experiments that require video imaging. In order to assess the state-of-the-art in video technology and data storage systems, a survey was conducted of the High Resolution, High Frame Rate Video Technology (HHVT) products. The performance of the state-of-the-art solid state cameras and image sensors, video recording systems, data transmission devices, and data storage systems versus users' requirements are shown graphically.

Optimization of radiation sensors for a passive terahertz video camera for security applications

NARCIS (Netherlands)

Zieger, G.J.M.

2014-01-01

A passive terahertz video camera allows for fast security screenings from distances of several meters. It avoids irradiation or the impressions of nakedness, which oftentimes cause embarrassment and trepidation of the concerned persons. This work describes the optimization of highly sensitive

Feature Quantization and Pooling for Videos

Science.gov (United States)

2014-05-01

less vertical motion. The exceptions are videos from the classes of biking (mainly due to the camera tracking fast bikers), jumping on a trampoline ...tracking the bikers; the jumping videos, featuring people on trampolines , the swing videos, which are usually recorded in profile view, and the walking

VideoWeb Dataset for Multi-camera Activities and Non-verbal Communication

Science.gov (United States)

Denina, Giovanni; Bhanu, Bir; Nguyen, Hoang Thanh; Ding, Chong; Kamal, Ahmed; Ravishankar, Chinya; Roy-Chowdhury, Amit; Ivers, Allen; Varda, Brenda

Human-activity recognition is one of the most challenging problems in computer vision. Researchers from around the world have tried to solve this problem and have come a long way in recognizing simple motions and atomic activities. As the computer vision community heads toward fully recognizing human activities, a challenging and labeled dataset is needed. To respond to that need, we collected a dataset of realistic scenarios in a multi-camera network environment (VideoWeb) involving multiple persons performing dozens of different repetitive and non-repetitive activities. This chapter describes the details of the dataset. We believe that this VideoWeb Activities dataset is unique and it is one of the most challenging datasets available today. The dataset is publicly available online at http://vwdata.ee.ucr.edu/ along with the data annotation.

Intelligent keyframe extraction for video printing

Science.gov (United States)

Zhang, Tong

2004-10-01

Nowadays most digital cameras have the functionality of taking short video clips, with the length of video ranging from several seconds to a couple of minutes. The purpose of this research is to develop an algorithm which extracts an optimal set of keyframes from each short video clip so that the user could obtain proper video frames to print out. In current video printing systems, keyframes are normally obtained by evenly sampling the video clip over time. Such an approach, however, may not reflect highlights or regions of interest in the video. Keyframes derived in this way may also be improper for video printing in terms of either content or image quality. In this paper, we present an intelligent keyframe extraction approach to derive an improved keyframe set by performing semantic analysis of the video content. For a video clip, a number of video and audio features are analyzed to first generate a candidate keyframe set. These features include accumulative color histogram and color layout differences, camera motion estimation, moving object tracking, face detection and audio event detection. Then, the candidate keyframes are clustered and evaluated to obtain a final keyframe set. The objective is to automatically generate a limited number of keyframes to show different views of the scene; to show different people and their actions in the scene; and to tell the story in the video shot. Moreover, frame extraction for video printing, which is a rather subjective problem, is considered in this work for the first time, and a semi-automatic approach is proposed.

What Counts as Educational Video?: Working toward Best Practice Alignment between Video Production Approaches and Outcomes

Science.gov (United States)

Winslett, Greg

2014-01-01

The twenty years since the first digital video camera was made commercially available has seen significant increases in the use of low-cost, amateur video productions for teaching and learning. In the same period, production and consumption of professionally produced video has also increased, as has the distribution platforms to access it.…

VAP/VAT: video analytics platform and test bed for testing and deploying video analytics

Science.gov (United States)

Gorodnichy, Dmitry O.; Dubrofsky, Elan

2010-04-01

Deploying Video Analytics in operational environments is extremely challenging. This paper presents a methodological approach developed by the Video Surveillance and Biometrics Section (VSB) of the Science and Engineering Directorate (S&E) of the Canada Border Services Agency (CBSA) to resolve these problems. A three-phase approach to enable VA deployment within an operational agency is presented and the Video Analytics Platform and Testbed (VAP/VAT) developed by the VSB section is introduced. In addition to allowing the integration of third party and in-house built VA codes into an existing video surveillance infrastructure, VAP/VAT also allows the agency to conduct an unbiased performance evaluation of the cameras and VA software available on the market. VAP/VAT consists of two components: EventCapture, which serves to Automatically detect a "Visual Event", and EventBrowser, which serves to Display & Peruse of "Visual Details" captured at the "Visual Event". To deal with Open architecture as well as with Closed architecture cameras, two video-feed capture mechanisms have been developed within the EventCapture component: IPCamCapture and ScreenCapture.

Automatic mashup generation of multiple-camera videos

NARCIS (Netherlands)

Shrestha, P.

2009-01-01

The amount of user generated video content is growing enormously with the increase in availability and affordability of technologies for video capturing (e.g. camcorders, mobile-phones), storing (e.g. magnetic and optical devices, online storage services), and sharing (e.g. broadband internet,

Low-complexity camera digital signal imaging for video document projection system

Science.gov (United States)

Hsia, Shih-Chang; Tsai, Po-Shien

2011-04-01

We present high-performance and low-complexity algorithms for real-time camera imaging applications. The main functions of the proposed camera digital signal processing (DSP) involve color interpolation, white balance, adaptive binary processing, auto gain control, and edge and color enhancement for video projection systems. A series of simulations demonstrate that the proposed method can achieve good image quality while keeping computation cost and memory requirements low. On the basis of the proposed algorithms, the cost-effective hardware core is developed using Verilog HDL. The prototype chip has been verified with one low-cost programmable device. The real-time camera system can achieve 1270 × 792 resolution with the combination of extra components and can demonstrate each DSP function.

Hierarchical video surveillance architecture: a chassis for video big data analytics and exploration

Science.gov (United States)

Ajiboye, Sola O.; Birch, Philip; Chatwin, Christopher; Young, Rupert

2015-03-01

There is increasing reliance on video surveillance systems for systematic derivation, analysis and interpretation of the data needed for predicting, planning, evaluating and implementing public safety. This is evident from the massive number of surveillance cameras deployed across public locations. For example, in July 2013, the British Security Industry Association (BSIA) reported that over 4 million CCTV cameras had been installed in Britain alone. The BSIA also reveal that only 1.5% of these are state owned. In this paper, we propose a framework that allows access to data from privately owned cameras, with the aim of increasing the efficiency and accuracy of public safety planning, security activities, and decision support systems that are based on video integrated surveillance systems. The accuracy of results obtained from government-owned public safety infrastructure would improve greatly if privately owned surveillance systems `expose' relevant video-generated metadata events, such as triggered alerts and also permit query of a metadata repository. Subsequently, a police officer, for example, with an appropriate level of system permission can query unified video systems across a large geographical area such as a city or a country to predict the location of an interesting entity, such as a pedestrian or a vehicle. This becomes possible with our proposed novel hierarchical architecture, the Fused Video Surveillance Architecture (FVSA). At the high level, FVSA comprises of a hardware framework that is supported by a multi-layer abstraction software interface. It presents video surveillance systems as an adapted computational grid of intelligent services, which is integration-enabled to communicate with other compatible systems in the Internet of Things (IoT).

Compressive Video Recovery Using Block Match Multi-Frame Motion Estimation Based on Single Pixel Cameras

Directory of Open Access Journals (Sweden)

Sheng Bi

2016-03-01

Full Text Available Compressive sensing (CS theory has opened up new paths for the development of signal processing applications. Based on this theory, a novel single pixel camera architecture has been introduced to overcome the current limitations and challenges of traditional focal plane arrays. However, video quality based on this method is limited by existing acquisition and recovery methods, and the method also suffers from being time-consuming. In this paper, a multi-frame motion estimation algorithm is proposed in CS video to enhance the video quality. The proposed algorithm uses multiple frames to implement motion estimation. Experimental results show that using multi-frame motion estimation can improve the quality of recovered videos. To further reduce the motion estimation time, a block match algorithm is used to process motion estimation. Experiments demonstrate that using the block match algorithm can reduce motion estimation time by 30%.

vid116_0501n -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

vid116_0501s -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

vid116_0501c -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

vid116_0501d -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vesselTatoosh during August 2005. Video data from...

Design and Optimization of the VideoWeb Wireless Camera Network

Directory of Open Access Journals (Sweden)

Nguyen HoangThanh

2010-01-01

Full Text Available Sensor networks have been a very active area of research in recent years. However, most of the sensors used in the development of these networks have been local and nonimaging sensors such as acoustics, seismic, vibration, temperature, humidity. The emerging development of video sensor networks poses its own set of unique challenges, including high-bandwidth and low latency requirements for real-time processing and control. This paper presents a systematic approach by detailing the design, implementation, and evaluation of a large-scale wireless camera network, suitable for a variety of practical real-time applications. We take into consideration issues related to hardware, software, control, architecture, network connectivity, performance evaluation, and data-processing strategies for the network. We also perform multiobjective optimization on settings such as video resolution and compression quality to provide insight into the performance trade-offs when configuring such a network and present lessons learned in the building and daily usage of the network.

Innovative Solution to Video Enhancement

Science.gov (United States)

2001-01-01

Through a licensing agreement, Intergraph Government Solutions adapted a technology originally developed at NASA's Marshall Space Flight Center for enhanced video imaging by developing its Video Analyst(TM) System. Marshall's scientists developed the Video Image Stabilization and Registration (VISAR) technology to help FBI agents analyze video footage of the deadly 1996 Olympic Summer Games bombing in Atlanta, Georgia. VISAR technology enhanced nighttime videotapes made with hand-held camcorders, revealing important details about the explosion. Intergraph's Video Analyst System is a simple, effective, and affordable tool for video enhancement and analysis. The benefits associated with the Video Analyst System include support of full-resolution digital video, frame-by-frame analysis, and the ability to store analog video in digital format. Up to 12 hours of digital video can be stored and maintained for reliable footage analysis. The system also includes state-of-the-art features such as stabilization, image enhancement, and convolution to help improve the visibility of subjects in the video without altering underlying footage. Adaptable to many uses, Intergraph#s Video Analyst System meets the stringent demands of the law enforcement industry in the areas of surveillance, crime scene footage, sting operations, and dash-mounted video cameras.

Multimodal Semantics Extraction from User-Generated Videos

Directory of Open Access Journals (Sweden)

Francesco Cricri

2012-01-01

Full Text Available User-generated video content has grown tremendously fast to the point of outpacing professional content creation. In this work we develop methods that analyze contextual information of multiple user-generated videos in order to obtain semantic information about public happenings (e.g., sport and live music events being recorded in these videos. One of the key contributions of this work is a joint utilization of different data modalities, including such captured by auxiliary sensors during the video recording performed by each user. In particular, we analyze GPS data, magnetometer data, accelerometer data, video- and audio-content data. We use these data modalities to infer information about the event being recorded, in terms of layout (e.g., stadium, genre, indoor versus outdoor scene, and the main area of interest of the event. Furthermore we propose a method that automatically identifies the optimal set of cameras to be used in a multicamera video production. Finally, we detect the camera users which fall within the field of view of other cameras recording at the same public happening. We show that the proposed multimodal analysis methods perform well on various recordings obtained in real sport events and live music performances.

High Dynamic Range Video

CERN Document Server

Myszkowski, Karol

2008-01-01

This book presents a complete pipeline forHDR image and video processing fromacquisition, through compression and quality evaluation, to display. At the HDR image and video acquisition stage specialized HDR sensors or multi-exposure techniques suitable for traditional cameras are discussed. Then, we present a practical solution for pixel values calibration in terms of photometric or radiometric quantities, which are required in some technically oriented applications. Also, we cover the problem of efficient image and video compression and encoding either for storage or transmission purposes, in

Falling-incident detection and throughput enhancement in a multi-camera video-surveillance system.

Science.gov (United States)

Shieh, Wann-Yun; Huang, Ju-Chin

2012-09-01

For most elderly, unpredictable falling incidents may occur at the corner of stairs or a long corridor due to body frailty. If we delay to rescue a falling elder who is likely fainting, more serious consequent injury may occur. Traditional secure or video surveillance systems need caregivers to monitor a centralized screen continuously, or need an elder to wear sensors to detect falling incidents, which explicitly waste much human power or cause inconvenience for elders. In this paper, we propose an automatic falling-detection algorithm and implement this algorithm in a multi-camera video surveillance system. The algorithm uses each camera to fetch the images from the regions required to be monitored. It then uses a falling-pattern recognition algorithm to determine if a falling incident has occurred. If yes, system will send short messages to someone needs to be noticed. The algorithm has been implemented in a DSP-based hardware acceleration board for functionality proof. Simulation results show that the accuracy of falling detection can achieve at least 90% and the throughput of a four-camera surveillance system can be improved by about 2.1 times. Copyright © 2011 IPEM. Published by Elsevier Ltd. All rights reserved.

Standardized access, display, and retrieval of medical video

Science.gov (United States)

Bellaire, Gunter; Steines, Daniel; Graschew, Georgi; Thiel, Andreas; Bernarding, Johannes; Tolxdorff, Thomas; Schlag, Peter M.

1999-05-01

The system presented here enhances documentation and data- secured, second-opinion facilities by integrating video sequences into DICOM 3.0. We present an implementation for a medical video server extended by a DICOM interface. Security mechanisms conforming with DICOM are integrated to enable secure internet access. Digital video documents of diagnostic and therapeutic procedures should be examined regarding the clip length and size necessary for second opinion and manageable with today's hardware. Image sources relevant for this paper include 3D laparoscope, 3D surgical microscope, 3D open surgery camera, synthetic video, and monoscopic endoscopes, etc. The global DICOM video concept and three special workplaces of distinct applications are described. Additionally, an approach is presented to analyze the motion of the endoscopic camera for future automatic video-cutting. Digital stereoscopic video sequences are especially in demand for surgery . Therefore DSVS are also integrated into the DICOM video concept. Results are presented describing the suitability of stereoscopic display techniques for the operating room.

3D video

CERN Document Server

Lucas, Laurent; Loscos, Céline

2013-01-01

While 3D vision has existed for many years, the use of 3D cameras and video-based modeling by the film industry has induced an explosion of interest for 3D acquisition technology, 3D content and 3D displays. As such, 3D video has become one of the new technology trends of this century.The chapters in this book cover a large spectrum of areas connected to 3D video, which are presented both theoretically and technologically, while taking into account both physiological and perceptual aspects. Stepping away from traditional 3D vision, the authors, all currently involved in these areas, provide th

Video Toroid Cavity Imager

Energy Technology Data Exchange (ETDEWEB)

Gerald, Rex E. II; Sanchez, Jairo; Rathke, Jerome W.

2004-08-10

A video toroid cavity imager for in situ measurement of electrochemical properties of an electrolytic material sample includes a cylindrical toroid cavity resonator containing the sample and employs NMR and video imaging for providing high-resolution spectral and visual information of molecular characteristics of the sample on a real-time basis. A large magnetic field is applied to the sample under controlled temperature and pressure conditions to simultaneously provide NMR spectroscopy and video imaging capabilities for investigating electrochemical transformations of materials or the evolution of long-range molecular aggregation during cooling of hydrocarbon melts. The video toroid cavity imager includes a miniature commercial video camera with an adjustable lens, a modified compression coin cell imager with a fiat circular principal detector element, and a sample mounted on a transparent circular glass disk, and provides NMR information as well as a video image of a sample, such as a polymer film, with micrometer resolution.

Underwater video enhancement using multi-camera super-resolution

Science.gov (United States)

Quevedo, E.; Delory, E.; Callicó, G. M.; Tobajas, F.; Sarmiento, R.

2017-12-01

Image spatial resolution is critical in several fields such as medicine, communications or satellite, and underwater applications. While a large variety of techniques for image restoration and enhancement has been proposed in the literature, this paper focuses on a novel Super-Resolution fusion algorithm based on a Multi-Camera environment that permits to enhance the quality of underwater video sequences without significantly increasing computation. In order to compare the quality enhancement, two objective quality metrics have been used: PSNR (Peak Signal-to-Noise Ratio) and the SSIM (Structural SIMilarity) index. Results have shown that the proposed method enhances the objective quality of several underwater sequences, avoiding the appearance of undesirable artifacts, with respect to basic fusion Super-Resolution algorithms.

A Taxonomy of Asynchronous Instructional Video Styles

Science.gov (United States)

Chorianopoulos, Konstantinos

2018-01-01

Many educational organizations are employing instructional videos in their pedagogy, but there is a limited understanding of the possible video formats. In practice, the presentation format of instructional videos ranges from direct recording of classroom teaching with a stationary camera, or screencasts with voiceover, to highly elaborate video…

Algorithms for the automatic identification of MARFEs and UFOs in JET database of visible camera videos

International Nuclear Information System (INIS)

Murari, A.; Camplani, M.; Cannas, B.; Usai, P.; Mazon, D.; Delaunay, F.

2010-01-01

MARFE instabilities and UFOs leave clear signatures in JET fast visible camera videos. Given the potential harmful consequences of these events, particularly as triggers of disruptions, it would be important to have the means of detecting them automatically. In this paper, the results of various algorithms to identify automatically the MARFEs and UFOs in JET visible videos are reported. The objective is to retrieve the videos, which have captured these events, exploring the whole JET database of images, as a preliminary step to the development of real-time identifiers in the future. For the detection of MARFEs, a complete identifier has been finalized, using morphological operators and Hu moments. The final algorithm manages to identify the videos with MARFEs with a success rate exceeding 80%. Due to the lack of a complete statistics of examples, the UFO identifier is less developed, but a preliminary code can detect UFOs quite reliably. (authors)

Intelligent video surveillance systems and technology

CERN Document Server

Ma, Yunqian

2009-01-01

From the streets of London to subway stations in New York City, hundreds of thousands of surveillance cameras ubiquitously collect hundreds of thousands of videos, often running 24/7. How can such vast volumes of video data be stored, analyzed, indexed, and searched? How can advanced video analysis and systems autonomously recognize people and detect targeted activities real-time? Collating and presenting the latest information Intelligent Video Surveillance: Systems and Technology explores these issues, from fundamentals principle to algorithmic design and system implementation.An Integrated

Utilization of an video camera in study of the goshawk (Accipiter gentilis diet

Directory of Open Access Journals (Sweden)

Martin Tomešek

2011-01-01

Full Text Available In 2009, research was carried out into the food spectrum of goshawk (Accipiter gentilis by means of automatic digital video cameras with a recoding device in the area of the Chřiby Upland. The monitoring took place at two localities in the vicinity of the village of Buchlovice at the southeastern edge of the Chřiby Upland in a period from hatching the chicks to their flying out from a nest. The unambiguous advantage of using the camera systems at the study of food spectrum is a possibility of the exact determination of brought preys in the majority of cases. As much as possible economic and effective technology prepared according to given conditions was used. Results of using automatic digital video cameras with a recoding device consist in a number of valuable data, which clarify the food spectrum of a given species. The main output of the whole project is determination of the food spectrum of goshawk (Accipiter gentilis from two localities, which showed the following composition: 89 % birds, 9.5 % mammals and 1.5 % other animals or unidentifiable components of food. Birds of the genus Turdus were the most frequent prey in both cases of monitoring. As for mammals, Sciurus vulgaris was most frequent.

Digital video recording and archiving in ophthalmic surgery

Directory of Open Access Journals (Sweden)

Raju Biju

2006-01-01

Full Text Available Currently most ophthalmic operating rooms are equipped with an analog video recording system [analog Charge Couple Device camera for video grabbing and a Video Cassette Recorder for recording]. We discuss the various advantages of a digital video capture device, its archiving capabilities and our experience during the transition from analog to digital video recording and archiving. The basic terminology and concepts related to analog and digital video, along with the choice of hardware, software and formats for archiving are discussed.

VIDEO ETNOGRAFI: PENGALAMAN PENELITIAN SOSIAL DENGAN VIDEO KAMERA DI SULAWESI SELATAN

Directory of Open Access Journals (Sweden)

Moh Yasir Alimi

2013-04-01

Full Text Available Tujuan penelitian ini adalah untuk mengeksplorasi bagaimana video kamera dapat membantu focus pikiran peneliti, mempertajam naluri etnografi, memperbagus hubungan dengan masyarakat dan memperbagus laporan penelitian. Penelitian dilakukan di Sulawesi Selatan selama satu tahun dengan menggunakan handycam Sony DCR-TRV27, handycam Sony yang dilengkapi dengan fitur screen dan layar pengintip untuk siang hari. Kecanggihan teknologi kamera bertemu dengan kekayaan kehidupan social di Sulawesi Selatan, sebagaimana terefleksikan paling baik dalam upacara pernikahan. Video kamera secara sistematik mempunyai tempat yang penting dalam system knowledge/power local. Melakukan hal ini, artikel ini tidak hanya mendiskusikan tentang penggunaan kamera di praktek etnografis, tetapi juga mendiskusikan dunia sosial yang memungkinkan kamera mempunyai peran yang sangat penting didalamnya. In this article, the author explores how a video camera can refocus researcher’s mind, sharpens ethnographic senses, and improve relation with the community. This sophisticated feature of technology has met with the vibrancy of social life in South Sulawesi, best reflected in wedding ceremonies, placing camera nicely in the existing local system of knowledge/power. The research was done for one year using Sony handycam Sony DCR-TRV27. The study is drawn from a year fieldwork experience in South Sulawesi. This article does not only discuss  the use of camera in an ethnographic practice, but also discusses the social world that has enabled the camera to have a central place in it.

Face Recognition and Tracking in Videos

Directory of Open Access Journals (Sweden)

Swapnil Vitthal Tathe

2017-07-01

Full Text Available Advancement in computer vision technology and availability of video capturing devices such as surveillance cameras has evoked new video processing applications. The research in video face recognition is mostly biased towards law enforcement applications. Applications involves human recognition based on face and iris, human computer interaction, behavior analysis, video surveillance etc. This paper presents face tracking framework that is capable of face detection using Haar features, recognition using Gabor feature extraction, matching using correlation score and tracking using Kalman filter. The method has good recognition rate for real-life videos and robust performance to changes due to illumination, environmental factors, scale, pose and orientations.

Video Golf

Science.gov (United States)

1995-01-01

George Nauck of ENCORE!!! invented and markets the Advanced Range Performance (ARPM) Video Golf System for measuring the result of a golf swing. After Nauck requested their assistance, Marshall Space Flight Center scientists suggested video and image processing/computing technology, and provided leads on commercial companies that dealt with the pertinent technologies. Nauck contracted with Applied Research Inc. to develop a prototype. The system employs an elevated camera, which sits behind the tee and follows the flight of the ball down range, catching the point of impact and subsequent roll. Instant replay of the video on a PC monitor at the tee allows measurement of the carry and roll. The unit measures distance and deviation from the target line, as well as distance from the target when one is selected. The information serves as an immediate basis for making adjustments or as a record of skill level progress for golfers.

User interface using a 3D model for video surveillance

Science.gov (United States)

Hata, Toshihiko; Boh, Satoru; Tsukada, Akihiro; Ozaki, Minoru

1998-02-01

These days fewer people, who must carry out their tasks quickly and precisely, are required in industrial surveillance and monitoring applications such as plant control or building security. Utilizing multimedia technology is a good approach to meet this need, and we previously developed Media Controller, which is designed for the applications and provides realtime recording and retrieval of digital video data in a distributed environment. In this paper, we propose a user interface for such a distributed video surveillance system in which 3D models of buildings and facilities are connected to the surveillance video. A novel method of synchronizing camera field data with each frame of a video stream is considered. This method records and reads the camera field data similarity to the video data and transmits it synchronously with the video stream. This enables the user interface to have such useful functions as comprehending the camera field immediately and providing clues when visibility is poor, for not only live video but also playback video. We have also implemented and evaluated the display function which makes surveillance video and 3D model work together using Media Controller with Java and Virtual Reality Modeling Language employed for multi-purpose and intranet use of 3D model.

Application of robust face recognition in video surveillance systems

Science.gov (United States)

Zhang, De-xin; An, Peng; Zhang, Hao-xiang

2018-03-01

In this paper, we propose a video searching system that utilizes face recognition as searching indexing feature. As the applications of video cameras have great increase in recent years, face recognition makes a perfect fit for searching targeted individuals within the vast amount of video data. However, the performance of such searching depends on the quality of face images recorded in the video signals. Since the surveillance video cameras record videos without fixed postures for the object, face occlusion is very common in everyday video. The proposed system builds a model for occluded faces using fuzzy principal component analysis (FPCA), and reconstructs the human faces with the available information. Experimental results show that the system has very high efficiency in processing the real life videos, and it is very robust to various kinds of face occlusions. Hence it can relieve people reviewers from the front of the monitors and greatly enhances the efficiency as well. The proposed system has been installed and applied in various environments and has already demonstrated its power by helping solving real cases.

Noise aliasing in interline-video-based fluoroscopy systems

International Nuclear Information System (INIS)

Lai, H.; Cunningham, I.A.

2002-01-01

Video-based imaging systems for continuous (nonpulsed) x-ray fluoroscopy use a variety of video formats. Conventional video-camera systems may operate in either interlaced or progressive-scan modes, and CCD systems may operate in interline- or frame-transfer modes. A theoretical model of the image noise power spectrum corresponding to these formats is described. It is shown that with respect to frame-transfer or progressive-readout modes, interline or interlaced cameras operating in a frame-integration mode will result in a spectral shift of 25% of the total image noise power from low spatial frequencies to high. In a field-integration mode, noise power is doubled with most of the increase occurring at high spatial frequencies. The differences are due primarily to the effect of noise aliasing. In interline or interlaced formats, alternate lines are obtained with each video field resulting in a vertical sampling frequency for noise that is one half of the physical sampling frequency. The extent of noise aliasing is modified by differences in the statistical correlations between video fields in the different modes. The theoretical model is validated with experiments using an x-ray image intensifier and CCD-camera system. It is shown that different video modes affect the shape of the noise-power spectrum and therefore the detective quantum efficiency. While the effect on observer performance is not addressed, it is concluded that in order to minimize image noise at the critical mid-to-high spatial frequencies for a specified x-ray exposure, fluoroscopic systems should use only frame-transfer (CCD camera) or progressive-scan (conventional video) formats

Intelligent Model for Video Survillance Security System

Directory of Open Access Journals (Sweden)

J. Vidhya

2013-12-01

Full Text Available Video surveillance system senses and trails out all the threatening issues in the real time environment. It prevents from security threats with the help of visual devices which gather the information related to videos like CCTV’S and IP (Internet Protocol cameras. Video surveillance system has become a key for addressing problems in the public security. They are mostly deployed on the IP based network. So, all the possible security threats exist in the IP based application might also be the threats available for the reliable application which is available for video surveillance. In result, it may increase cybercrime, illegal video access, mishandling videos and so on. Hence, in this paper an intelligent model is used to propose security for video surveillance system which ensures safety and it provides secured access on video.

Distributed Real-Time Embedded Video Processing

National Research Council Canada - National Science Library

Lv, Tiehan

2004-01-01

.... A deployable multi-camera video system must perform distributed computation, including computation near the camera as well as remote computations, in order to meet performance and power requirements...

Video systems for alarm assessment

International Nuclear Information System (INIS)

Greenwoll, D.A.; Matter, J.C.; Ebel, P.E.

1991-09-01

The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing closed-circuit television systems for video alarm assessment. There is a section on each of the major components in a video system: camera, lens, lighting, transmission, synchronization, switcher, monitor, and recorder. Each section includes information on component selection, procurement, installation, test, and maintenance. Considerations for system integration of the components are contained in each section. System emphasis is focused on perimeter intrusion detection and assessment systems. A glossary of video terms is included. 13 figs., 9 tabs

Video systems for alarm assessment

Energy Technology Data Exchange (ETDEWEB)

Greenwoll, D.A.; Matter, J.C. (Sandia National Labs., Albuquerque, NM (United States)); Ebel, P.E. (BE, Inc., Barnwell, SC (United States))

1991-09-01

The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing closed-circuit television systems for video alarm assessment. There is a section on each of the major components in a video system: camera, lens, lighting, transmission, synchronization, switcher, monitor, and recorder. Each section includes information on component selection, procurement, installation, test, and maintenance. Considerations for system integration of the components are contained in each section. System emphasis is focused on perimeter intrusion detection and assessment systems. A glossary of video terms is included. 13 figs., 9 tabs.

A semantic autonomous video surveillance system for dense camera networks in Smart Cities.

Science.gov (United States)

Calavia, Lorena; Baladrón, Carlos; Aguiar, Javier M; Carro, Belén; Sánchez-Esguevillas, Antonio

2012-01-01

This paper presents a proposal of an intelligent video surveillance system able to detect and identify abnormal and alarming situations by analyzing object movement. The system is designed to minimize video processing and transmission, thus allowing a large number of cameras to be deployed on the system, and therefore making it suitable for its usage as an integrated safety and security solution in Smart Cities. Alarm detection is performed on the basis of parameters of the moving objects and their trajectories, and is performed using semantic reasoning and ontologies. This means that the system employs a high-level conceptual language easy to understand for human operators, capable of raising enriched alarms with descriptions of what is happening on the image, and to automate reactions to them such as alerting the appropriate emergency services using the Smart City safety network.

A Semantic Autonomous Video Surveillance System for Dense Camera Networks in Smart Cities

Directory of Open Access Journals (Sweden)

Antonio Sánchez-Esguevillas

2012-08-01

Full Text Available This paper presents a proposal of an intelligent video surveillance system able to detect and identify abnormal and alarming situations by analyzing object movement. The system is designed to minimize video processing and transmission, thus allowing a large number of cameras to be deployed on the system, and therefore making it suitable for its usage as an integrated safety and security solution in Smart Cities. Alarm detection is performed on the basis of parameters of the moving objects and their trajectories, and is performed using semantic reasoning and ontologies. This means that the system employs a high-level conceptual language easy to understand for human operators, capable of raising enriched alarms with descriptions of what is happening on the image, and to automate reactions to them such as alerting the appropriate emergency services using the Smart City safety network.

Reliability of video-based identification of footstrike pattern and video time frame at initial contact in recreational runners

DEFF Research Database (Denmark)

Damsted, Camma; Larsen, L H; Nielsen, R.O.

2015-01-01

and video time frame at initial contact during treadmill running using two-dimensional (2D) video recordings. METHODS: Thirty-one recreational runners were recorded twice, 1 week apart, with a high-speed video camera. Two blinded raters evaluated each video twice with an interval of at least 14 days....... RESULTS: Kappa values for within-day identification of footstrike pattern revealed intra-rater agreement of 0.83-0.88 and inter-rater agreement of 0.50-0.63. Corresponding figures for between-day identification of footstrike pattern were 0.63-0.69 and 0.41-0.53, respectively. Identification of video time...... in 36% of the identifications (kappa=0.41). The 95% limits of agreement for identification of video time frame at initial contact may, at times, allow for different identification of footstrike pattern. Clinicians should, therefore, be encouraged to continue using clinical 2D video setups for intra...

Streaming Audio and Video: New Challenges and Opportunities for Museums.

Science.gov (United States)

Spadaccini, Jim

Streaming audio and video present new challenges and opportunities for museums. Streaming media is easier to author and deliver to Internet audiences than ever before; digital video editing is commonplace now that the tools--computers, digital video cameras, and hard drives--are so affordable; the cost of serving video files across the Internet…

An Energy-Efficient and High-Quality Video Transmission Architecture in Wireless Video-Based Sensor Networks

Directory of Open Access Journals (Sweden)

Yasaman Samei

2008-08-01

Full Text Available Technological progress in the fields of Micro Electro-Mechanical Systems (MEMS and wireless communications and also the availability of CMOS cameras, microphones and small-scale array sensors, which may ubiquitously capture multimedia content from the field, have fostered the development of low-cost limited resources Wireless Video-based Sensor Networks (WVSN. With regards to the constraints of videobased sensor nodes and wireless sensor networks, a supporting video stream is not easy to implement with the present sensor network protocols. In this paper, a thorough architecture is presented for video transmission over WVSN called Energy-efficient and high-Quality Video transmission Architecture (EQV-Architecture. This architecture influences three layers of communication protocol stack and considers wireless video sensor nodes constraints like limited process and energy resources while video quality is preserved in the receiver side. Application, transport, and network layers are the layers in which the compression protocol, transport protocol, and routing protocol are proposed respectively, also a dropping scheme is presented in network layer. Simulation results over various environments with dissimilar conditions revealed the effectiveness of the architecture in improving the lifetime of the network as well as preserving the video quality.

An Energy-Efficient and High-Quality Video Transmission Architecture in Wireless Video-Based Sensor Networks.

Science.gov (United States)

Aghdasi, Hadi S; Abbaspour, Maghsoud; Moghadam, Mohsen Ebrahimi; Samei, Yasaman

2008-08-04

Technological progress in the fields of Micro Electro-Mechanical Systems (MEMS) and wireless communications and also the availability of CMOS cameras, microphones and small-scale array sensors, which may ubiquitously capture multimedia content from the field, have fostered the development of low-cost limited resources Wireless Video-based Sensor Networks (WVSN). With regards to the constraints of videobased sensor nodes and wireless sensor networks, a supporting video stream is not easy to implement with the present sensor network protocols. In this paper, a thorough architecture is presented for video transmission over WVSN called Energy-efficient and high-Quality Video transmission Architecture (EQV-Architecture). This architecture influences three layers of communication protocol stack and considers wireless video sensor nodes constraints like limited process and energy resources while video quality is preserved in the receiver side. Application, transport, and network layers are the layers in which the compression protocol, transport protocol, and routing protocol are proposed respectively, also a dropping scheme is presented in network layer. Simulation results over various environments with dissimilar conditions revealed the effectiveness of the architecture in improving the lifetime of the network as well as preserving the video quality.

Structural analysis of color video camera installation on tank 241AW101 (2 Volumes)

Energy Technology Data Exchange (ETDEWEB)

Strehlow, J.P.

1994-08-24

A video camera is planned to be installed on the radioactive storage tank 241AW101 at the DOE` s Hanford Site in Richland, Washington. The camera will occupy the 20 inch port of the Multiport Flange riser which is to be installed on riser 5B of the 241AW101 (3,5,10). The objective of the project reported herein was to perform a seismic analysis and evaluation of the structural components of the camera for a postulated Design Basis Earthquake (DBE) per the reference Structural Design Specification (SDS) document (6). The detail of supporting engineering calculations is documented in URS/Blume Calculation No. 66481-01-CA-03 (1).

Structural analysis of color video camera installation on tank 241AW101 (2 Volumes)

International Nuclear Information System (INIS)

Strehlow, J.P.

1994-01-01

A video camera is planned to be installed on the radioactive storage tank 241AW101 at the DOE' s Hanford Site in Richland, Washington. The camera will occupy the 20 inch port of the Multiport Flange riser which is to be installed on riser 5B of the 241AW101 (3,5,10). The objective of the project reported herein was to perform a seismic analysis and evaluation of the structural components of the camera for a postulated Design Basis Earthquake (DBE) per the reference Structural Design Specification (SDS) document (6). The detail of supporting engineering calculations is documented in URS/Blume Calculation No. 66481-01-CA-03 (1)

Deep-Sky Video Astronomy

CERN Document Server

Massey, Steve

2009-01-01

A guide to using modern integrating video cameras for deep-sky viewing and imaging with the kinds of modest telescopes available commercially to amateur astronomers. It includes an introduction and a brief history of the technology and camera types. It examines the pros and cons of this unrefrigerated yet highly efficient technology

Virtual georeferencing : how an 11-eyed video camera helps the pipeline industry

Energy Technology Data Exchange (ETDEWEB)

Ball, C.

2006-08-15

Designed by Immersive Media Corporation (IMC) the new Telemmersion System is a lightweight camera system capable of generating synchronized high-resolution video streams that represent a full motion spherical world. With 11 cameras configured in a sphere, the system is portable and can be easily mounted on ground and air-borne vehicles for use in surveillance; integration; commanded control of interactive intelligent databases; scenario modelling; and specialized training. The system was recently used to georeference immersive video of existing and proposed pipeline routes. Footage from the system was used to supplement traditional data collection methods for environmental impact assessment; route selection and engineering; regulatory compliance; and public consultation. Traditionally, the medium used to visualize pipeline routes is a map overlaid with aerial photography. Pipeline routes are typically flown throughout the planning stages in order to give environmentalists, engineers and other personnel the opportunity to visually inspect the terrain, identify issues and make decisions. The technology has significantly reduced the costs during the planning stages of pipeline routes, as the remote footage can be stored on DVD, allowing various stakeholders and contractors to view the terrain and zoom in on particular land features. During one recent 3-day trip, 500 km of proposed pipeline was recorded using the technology. Typically, for various regulatory and environmental requirements, a half a dozen trips would have been required. 2 figs.

Video Analytics for Business Intelligence

CERN Document Server

Porikli, Fatih; Xiang, Tao; Gong, Shaogang

2012-01-01

Closed Circuit TeleVision (CCTV) cameras have been increasingly deployed pervasively in public spaces including retail centres and shopping malls. Intelligent video analytics aims to automatically analyze content of massive amount of public space video data and has been one of the most active areas of computer vision research in the last two decades. Current focus of video analytics research has been largely on detecting alarm events and abnormal behaviours for public safety and security applications. However, increasingly CCTV installations have also been exploited for gathering and analyzing business intelligence information, in order to enhance marketing and operational efficiency. For example, in retail environments, surveillance cameras can be utilised to collect statistical information about shopping behaviour and preference for marketing (e.g., how many people entered a shop; how many females/males or which age groups of people showed interests to a particular product; how long did they stay in the sho...

Innovative Video Diagnostic Equipment for Material Science

Science.gov (United States)

Capuano, G.; Titomanlio, D.; Soellner, W.; Seidel, A.

2012-01-01

Materials science experiments under microgravity increasingly rely on advanced optical systems to determine the physical properties of the samples under investigation. This includes video systems with high spatial and temporal resolution. The acquisition, handling, storage and transmission to ground of the resulting video data are very challenging. Since the available downlink data rate is limited, the capability to compress the video data significantly without compromising the data quality is essential. We report on the development of a Digital Video System (DVS) for EML (Electro Magnetic Levitator) which provides real-time video acquisition, high compression using advanced Wavelet algorithms, storage and transmission of a continuous flow of video with different characteristics in terms of image dimensions and frame rates. The DVS is able to operate with the latest generation of high-performance cameras acquiring high resolution video images up to 4Mpixels@60 fps or high frame rate video images up to about 1000 fps@512x512pixels.

Video Conferencing for a Virtual Seminar Room

DEFF Research Database (Denmark)

Forchhammer, Søren; Fosgerau, A.; Hansen, Peter Søren K.

2002-01-01

A PC-based video conferencing system for a virtual seminar room is presented. The platform is enhanced with DSPs for audio and video coding and processing. A microphone array is used to facilitate audio based speaker tracking, which is used for adaptive beam-forming and automatic camera...

The Use of Smart Glasses for Surgical Video Streaming.

Science.gov (United States)

Hiranaka, Takafumi; Nakanishi, Yuta; Fujishiro, Takaaki; Hida, Yuichi; Tsubosaka, Masanori; Shibata, Yosaku; Okimura, Kenjiro; Uemoto, Harunobu

2017-04-01

Observation of surgical procedures performed by experts is extremely important for acquisition and improvement of surgical skills. Smart glasses are small computers, which comprise a head-mounted monitor and video camera, and can be connected to the internet. They can be used for remote observation of surgeries by video streaming. Although Google Glass is the most commonly used smart glasses for medical purposes, it is still unavailable commercially and has some limitations. This article reports the use of a different type of smart glasses, InfoLinker, for surgical video streaming. InfoLinker has been commercially available in Japan for industrial purposes for more than 2 years. It is connected to a video server via wireless internet directly, and streaming video can be seen anywhere an internet connection is available. We have attempted live video streaming of knee arthroplasty operations that were viewed at several different locations, including foreign countries, on a common web browser. Although the quality of video images depended on the resolution and dynamic range of the video camera, speed of internet connection, and the wearer's attention to minimize image shaking, video streaming could be easily performed throughout the procedure. The wearer could confirm the quality of the video as the video was being shot by the head-mounted display. The time and cost for observation of surgical procedures can be reduced by InfoLinker, and further improvement of hardware as well as the wearer's video shooting technique is expected. We believe that this can be used in other medical settings.

Linear array of photodiodes to track a human speaker for video recording

International Nuclear Information System (INIS)

DeTone, D; Neal, H; Lougheed, R

2012-01-01

Communication and collaboration using stored digital media has garnered more interest by many areas of business, government and education in recent years. This is due primarily to improvements in the quality of cameras and speed of computers. An advantage of digital media is that it can serve as an effective alternative when physical interaction is not possible. Video recordings that allow for viewers to discern a presenter's facial features, lips and hand motions are more effective than videos that do not. To attain this, one must maintain a video capture in which the speaker occupies a significant portion of the captured pixels. However, camera operators are costly, and often do an imperfect job of tracking presenters in unrehearsed situations. This creates motivation for a robust, automated system that directs a video camera to follow a presenter as he or she walks anywhere in the front of a lecture hall or large conference room. Such a system is presented. The system consists of a commercial, off-the-shelf pan/tilt/zoom (PTZ) color video camera, a necklace of infrared LEDs and a linear photodiode array detector. Electronic output from the photodiode array is processed to generate the location of the LED necklace, which is worn by a human speaker. The computer controls the video camera movements to record video of the speaker. The speaker's vertical position and depth are assumed to remain relatively constant– the video camera is sent only panning (horizontal) movement commands. The LED necklace is flashed at 70Hz at a 50% duty cycle to provide noise-filtering capability. The benefit to using a photodiode array versus a standard video camera is its higher frame rate (4kHz vs. 60Hz). The higher frame rate allows for the filtering of infrared noise such as sunlight and indoor lighting–a capability absent from other tracking technologies. The system has been tested in a large lecture hall and is shown to be effective.

Linear array of photodiodes to track a human speaker for video recording

Science.gov (United States)

DeTone, D.; Neal, H.; Lougheed, R.

2012-12-01

Communication and collaboration using stored digital media has garnered more interest by many areas of business, government and education in recent years. This is due primarily to improvements in the quality of cameras and speed of computers. An advantage of digital media is that it can serve as an effective alternative when physical interaction is not possible. Video recordings that allow for viewers to discern a presenter's facial features, lips and hand motions are more effective than videos that do not. To attain this, one must maintain a video capture in which the speaker occupies a significant portion of the captured pixels. However, camera operators are costly, and often do an imperfect job of tracking presenters in unrehearsed situations. This creates motivation for a robust, automated system that directs a video camera to follow a presenter as he or she walks anywhere in the front of a lecture hall or large conference room. Such a system is presented. The system consists of a commercial, off-the-shelf pan/tilt/zoom (PTZ) color video camera, a necklace of infrared LEDs and a linear photodiode array detector. Electronic output from the photodiode array is processed to generate the location of the LED necklace, which is worn by a human speaker. The computer controls the video camera movements to record video of the speaker. The speaker's vertical position and depth are assumed to remain relatively constant- the video camera is sent only panning (horizontal) movement commands. The LED necklace is flashed at 70Hz at a 50% duty cycle to provide noise-filtering capability. The benefit to using a photodiode array versus a standard video camera is its higher frame rate (4kHz vs. 60Hz). The higher frame rate allows for the filtering of infrared noise such as sunlight and indoor lighting-a capability absent from other tracking technologies. The system has been tested in a large lecture hall and is shown to be effective.

High-Speed Video Analysis in a Conceptual Physics Class

Science.gov (United States)

Desbien, Dwain M.

2011-09-01

The use of probe ware and computers has become quite common in introductory physics classrooms. Video analysis is also becoming more popular and is available to a wide range of students through commercially available and/or free software.2,3 Video analysis allows for the study of motions that cannot be easily measured in the traditional lab setting and also allows real-world situations to be analyzed. Many motions are too fast to easily be captured at the standard video frame rate of 30 frames per second (fps) employed by most video cameras. This paper will discuss using a consumer camera that can record high-frame-rate video in a college-level conceptual physics class. In particular this will involve the use of model rockets to determine the acceleration during the boost period right at launch and compare it to a simple model of the expected acceleration.

Nyquist Sampling Theorem: Understanding the Illusion of a Spinning Wheel Captured with a Video Camera

Science.gov (United States)

Levesque, Luc

2014-01-01

Inaccurate measurements occur regularly in data acquisition as a result of improper sampling times. An understanding of proper sampling times when collecting data with an analogue-to-digital converter or video camera is crucial in order to avoid anomalies. A proper choice of sampling times should be based on the Nyquist sampling theorem. If the…

Video-based Mobile Mapping System Using Smartphones

Science.gov (United States)

Al-Hamad, A.; Moussa, A.; El-Sheimy, N.

2014-11-01

The last two decades have witnessed a huge growth in the demand for geo-spatial data. This demand has encouraged researchers around the world to develop new algorithms and design new mapping systems in order to obtain reliable sources for geo-spatial data. Mobile Mapping Systems (MMS) are one of the main sources for mapping and Geographic Information Systems (GIS) data. MMS integrate various remote sensing sensors, such as cameras and LiDAR, along with navigation sensors to provide the 3D coordinates of points of interest from moving platform (e.g. cars, air planes, etc.). Although MMS can provide accurate mapping solution for different GIS applications, the cost of these systems is not affordable for many users and only large scale companies and institutions can benefits from MMS systems. The main objective of this paper is to propose a new low cost MMS with reasonable accuracy using the available sensors in smartphones and its video camera. Using the smartphone video camera, instead of capturing individual images, makes the system easier to be used by non-professional users since the system will automatically extract the highly overlapping frames out of the video without the user intervention. Results of the proposed system are presented which demonstrate the effect of the number of the used images in mapping solution. In addition, the accuracy of the mapping results obtained from capturing a video is compared to the same results obtained from using separate captured images instead of video.

Object Occlusion Detection Using Automatic Camera Calibration for a Wide-Area Video Surveillance System

Directory of Open Access Journals (Sweden)

Jaehoon Jung

2016-06-01

Full Text Available This paper presents an object occlusion detection algorithm using object depth information that is estimated by automatic camera calibration. The object occlusion problem is a major factor to degrade the performance of object tracking and recognition. To detect an object occlusion, the proposed algorithm consists of three steps: (i automatic camera calibration using both moving objects and a background structure; (ii object depth estimation; and (iii detection of occluded regions. The proposed algorithm estimates the depth of the object without extra sensors but with a generic red, green and blue (RGB camera. As a result, the proposed algorithm can be applied to improve the performance of object tracking and object recognition algorithms for video surveillance systems.

Script Design for Information Film and Video.

Science.gov (United States)

Shelton, S. M. (Marty); And Others

1993-01-01

Shows how the empathy created in the audience by each of the five genres of film/video is a function of the five elements of film design: camera angle, close up, composition, continuity, and cutting. Discusses film/video script designing. Illustrates these concepts with a sample script and story board. (SR)

Thermal imagers: from ancient analog video output to state-of-the-art video streaming

Science.gov (United States)

Haan, Hubertus; Feuchter, Timo; Münzberg, Mario; Fritze, Jörg; Schlemmer, Harry

2013-06-01

The video output of thermal imagers stayed constant over almost two decades. When the famous Common Modules were employed a thermal image at first was presented to the observer in the eye piece only. In the early 1990s TV cameras were attached and the standard output was CCIR. In the civil camera market output standards changed to digital formats a decade ago with digital video streaming being nowadays state-of-the-art. The reasons why the output technique in the thermal world stayed unchanged over such a long time are: the very conservative view of the military community, long planning and turn-around times of programs and a slower growth of pixel number of TIs in comparison to consumer cameras. With megapixel detectors the CCIR output format is not sufficient any longer. The paper discusses the state-of-the-art compression and streaming solutions for TIs.

Video Capture of Plastic Surgery Procedures Using the GoPro HERO 3+.

Science.gov (United States)

Graves, Steven Nicholas; Shenaq, Deana Saleh; Langerman, Alexander J; Song, David H

2015-02-01

Significant improvements can be made in recoding surgical procedures, particularly in capturing high-quality video recordings from the surgeons' point of view. This study examined the utility of the GoPro HERO 3+ Black Edition camera for high-definition, point-of-view recordings of plastic and reconstructive surgery. The GoPro HERO 3+ Black Edition camera was head-mounted on the surgeon and oriented to the surgeon's perspective using the GoPro App. The camera was used to record 4 cases: 2 fat graft procedures and 2 breast reconstructions. During cases 1-3, an assistant remotely controlled the GoPro via the GoPro App. For case 4 the GoPro was linked to a WiFi remote, and controlled by the surgeon. Camera settings for case 1 were as follows: 1080p video resolution; 48 fps; Protune mode on; wide field of view; 16:9 aspect ratio. The lighting contrast due to the overhead lights resulted in limited washout of the video image. Camera settings were adjusted for cases 2-4 to a narrow field of view, which enabled the camera's automatic white balance to better compensate for bright lights focused on the surgical field. Cases 2-4 captured video sufficient for teaching or presentation purposes. The GoPro HERO 3+ Black Edition camera enables high-quality, cost-effective video recording of plastic and reconstructive surgery procedures. When set to a narrow field of view and automatic white balance, the camera is able to sufficiently compensate for the contrasting light environment of the operating room and capture high-resolution, detailed video.

Automatically assessing properties of dynamic cameras for camera selection and rapid deployment of video content analysis tasks in large-scale ad-hoc networks

Science.gov (United States)

den Hollander, Richard J. M.; Bouma, Henri; van Rest, Jeroen H. C.; ten Hove, Johan-Martijn; ter Haar, Frank B.; Burghouts, Gertjan J.

2017-10-01

Video analytics is essential for managing large quantities of raw data that are produced by video surveillance systems (VSS) for the prevention, repression and investigation of crime and terrorism. Analytics is highly sensitive to changes in the scene, and for changes in the optical chain so a VSS with analytics needs careful configuration and prompt maintenance to avoid false alarms. However, there is a trend from static VSS consisting of fixed CCTV cameras towards more dynamic VSS deployments over public/private multi-organization networks, consisting of a wider variety of visual sensors, including pan-tilt-zoom (PTZ) cameras, body-worn cameras and cameras on moving platforms. This trend will lead to more dynamic scenes and more frequent changes in the optical chain, creating structural problems for analytics. If these problems are not adequately addressed, analytics will not be able to continue to meet end users' developing needs. In this paper, we present a three-part solution for managing the performance of complex analytics deployments. The first part is a register containing meta data describing relevant properties of the optical chain, such as intrinsic and extrinsic calibration, and parameters of the scene such as lighting conditions or measures for scene complexity (e.g. number of people). A second part frequently assesses these parameters in the deployed VSS, stores changes in the register, and signals relevant changes in the setup to the VSS administrator. A third part uses the information in the register to dynamically configure analytics tasks based on VSS operator input. In order to support the feasibility of this solution, we give an overview of related state-of-the-art technologies for autocalibration (self-calibration), scene recognition and lighting estimation in relation to person detection. The presented solution allows for rapid and robust deployment of Video Content Analysis (VCA) tasks in large scale ad-hoc networks.

Human recognition in a video network

Science.gov (United States)

Bhanu, Bir

2009-10-01

Video networks is an emerging interdisciplinary field with significant and exciting scientific and technological challenges. It has great promise in solving many real-world problems and enabling a broad range of applications, including smart homes, video surveillance, environment and traffic monitoring, elderly care, intelligent environments, and entertainment in public and private spaces. This paper provides an overview of the design of a wireless video network as an experimental environment, camera selection, hand-off and control, anomaly detection. It addresses challenging questions for individual identification using gait and face at a distance and present new techniques and their comparison for robust identification.

Video Conference System that Keeps Mutual Eye Contact Among Participants

Directory of Open Access Journals (Sweden)

Masahiko Yahagi

2011-10-01

Full Text Available A novel video conference system is developed. Suppose that three people A, B, and C attend the video conference, the proposed system enables eye contact among every pair. Furthermore, when B and C chat, A feels as if B and C were facing each other (eye contact seems to be kept among B and C. In the case of a triangle video conference, the respective video system is composed of a half mirror, two video cameras, and two monitors. Each participant watches other participants' images that are reflected by the half mirror. Cameras are set behind the half mirror. Since participants' image (face and the camera position are adjusted to be the same direction, eye contact is kept and conversation becomes very natural compared with conventional video conference systems where participants' eyes do not point to the other participant. When 3 participants sit at the vertex of an equilateral triangle, eyes can be kept even for the situation mentioned above (eye contact between B and C from the aspect of A. Eye contact can be kept not only for 2 or 3 participants but also any number of participants as far as they sit at the vertex of a regular polygon.

REAL TIME SPEED ESTIMATION FROM MONOCULAR VIDEO

Directory of Open Access Journals (Sweden)

M. S. Temiz

2012-07-01

Full Text Available In this paper, detailed studies have been performed for developing a real time system to be used for surveillance of the traffic flow by using monocular video cameras to find speeds of the vehicles for secure travelling are presented. We assume that the studied road segment is planar and straight, the camera is tilted downward a bridge and the length of one line segment in the image is known. In order to estimate the speed of a moving vehicle from a video camera, rectification of video images is performed to eliminate the perspective effects and then the interest region namely the ROI is determined for tracking the vehicles. Velocity vectors of a sufficient number of reference points are identified on the image of the vehicle from each video frame. For this purpose sufficient number of points from the vehicle is selected, and these points must be accurately tracked on at least two successive video frames. In the second step, by using the displacement vectors of the tracked points and passed time, the velocity vectors of those points are computed. Computed velocity vectors are defined in the video image coordinate system and displacement vectors are measured by the means of pixel units. Then the magnitudes of the computed vectors in the image space are transformed to the object space to find the absolute values of these magnitudes. The accuracy of the estimated speed is approximately ±1 – 2 km/h. In order to solve the real time speed estimation problem, the authors have written a software system in C++ programming language. This software system has been used for all of the computations and test applications.

Iterative Multiview Side Information for Enhanced Reconstruction in Distributed Video Coding

Directory of Open Access Journals (Sweden)

2009-03-01

Full Text Available Distributed video coding (DVC is a new paradigm for video compression based on the information theoretical results of Slepian and Wolf (SW and Wyner and Ziv (WZ. DVC entails low-complexity encoders as well as separate encoding of correlated video sources. This is particularly attractive for multiview camera systems in video surveillance and camera sensor network applications, where low complexity is required at the encoder. In addition, the separate encoding of the sources implies no communication between the cameras in a practical scenario. This is an advantage since communication is time and power consuming and requires complex networking. In this work, different intercamera estimation techniques for side information (SI generation are explored and compared in terms of estimating quality, complexity, and rate distortion (RD performance. Further, a technique called iterative multiview side information (IMSI is introduced, where the final SI is used in an iterative reconstruction process. The simulation results show that IMSI significantly improves the RD performance for video with significant motion and activity. Furthermore, DVC outperforms AVC/H.264 Intra for video with average and low motion but it is still inferior to the Inter No Motion and Inter Motion modes.

A multiframe soft x-ray camera with fast video capture for the LSX field reversed configuration (FRC) experiment

International Nuclear Information System (INIS)

Crawford, E.A.

1992-01-01

Soft x-ray pinhole imaging has proven to be an exceptionally useful diagnostic for qualitative observation of impurity radiation from field reversed configuration plasmas. We used a four frame device, similar in design to those discussed in an earlier paper [E. A. Crawford, D. P. Taggart, and A. D. Bailey III, Rev. Sci. Instrum. 61, 2795 (1990)] as a routine diagnostic during the last six months of the Large s Experiment (LSX) program. Our camera is an improvement over earlier implementations in several significant aspects. It was designed and used from the onset of the LSX experiments with a video frame capture system so that an instant visual record of the shot was available to the machine operator as well as facilitating quantitative interpretation of intensity information recorded in the images. The camera was installed in the end region of the LSX on axis approximately 5.5 m from the plasma midplane. Experience with bolometers on LSX showed serious problems with ''particle dumps'' at the axial location at various times during the plasma discharge. Therefore, the initial implementation of the camera included an effective magnetic sweeper assembly. Overall performance of the camera, video capture system, and sweeper is discussed

A new video studio for CERN

CERN Multimedia

Anaïs Vernede

2011-01-01

On Monday, 14 February 2011 CERN's new video studio was inaugurated with a recording of "Spotlight on CERN", featuring an interview with the DG, Rolf Heuer.   CERN's new video studio. Almost all international organisations have a studio for their audiovisual communications, and now it's CERN’s turn to acquire such a facility. “In the past, we've made videos using the Globe audiovisual facilities and sometimes using the small photographic studio, which is equipped with simple temporary sets that aren’t really suitable for video,” explains Jacques Fichet, head of CERN‘s audiovisual service. Once the decision had been taken to create the new 100 square-metre video studio, the work took only five months to complete. The studio, located in Building 510, is equipped with a cyclorama (a continuous smooth white wall used as a background) measuring 3 m in height and 16 m in length, as well as a teleprompter, a rail-mounted camera dolly fo...

An unsupervised method for summarizing egocentric sport videos

Science.gov (United States)

Habibi Aghdam, Hamed; Jahani Heravi, Elnaz; Puig, Domenec

2015-12-01

People are getting more interested to record their sport activities using head-worn or hand-held cameras. This type of videos which is called egocentric sport videos has different motion and appearance patterns compared with life-logging videos. While a life-logging video can be defined in terms of well-defined human-object interactions, notwithstanding, it is not trivial to describe egocentric sport videos using well-defined activities. For this reason, summarizing egocentric sport videos based on human-object interaction might fail to produce meaningful results. In this paper, we propose an unsupervised method for summarizing egocentric videos by identifying the key-frames of the video. Our method utilizes both appearance and motion information and it automatically finds the number of the key-frames. Our blind user study on the new dataset collected from YouTube shows that in 93:5% cases, the users choose the proposed method as their first video summary choice. In addition, our method is within the top 2 choices of the users in 99% of studies.

Video Field Studies with your Cell Phone

DEFF Research Database (Denmark)

Buur, Jacob; Fraser, Euan

2010-01-01

Pod? Or with the GoPRO sports camera? Our approach has a strong focus on how to use video in design, rather than on the technical side. The goal is to engage design teams in meaningful discussions based on user empathy, rather than to produce beautiful videos. Basically it is a search for a minimalist way...

Head-camera video recordings of trauma core competency procedures can evaluate surgical resident's technical performance as well as colocated evaluators.

Science.gov (United States)

Mackenzie, Colin F; Pasley, Jason; Garofalo, Evan; Shackelford, Stacy; Chen, Hegang; Longinaker, Nyaradzo; Granite, Guinevere; Pugh, Kristy; Hagegeorge, George; Tisherman, Samuel A

2017-07-01

Unbiased evaluation of trauma core competency procedures is necessary to determine if residency and predeployment training courses are useful. We tested whether a previously validated individual procedure score (IPS) for individual procedure vascular exposure and fasciotomy (FAS) performance skills could discriminate training status by comparing IPS of evaluators colocated with surgeons to blind video evaluations. Performance of axillary artery (AA), brachial artery (BA), and femoral artery (FA) vascular exposures and lower extremity FAS on fresh cadavers by 40 PGY-2 to PGY-6 residents was video-recorded from head-mounted cameras. Two colocated trained evaluators assessed IPS before and after training. One surgeon in each pretraining tertile of IPS for each procedure was randomly identified for blind video review. The same 12 surgeons were video-recorded repeating the procedures less than 4 weeks after training. Five evaluators independently reviewed all 96 randomly arranged deidentified videos. Inter-rater reliability/consistency, intraclass correlation coefficients were compared by colocated versus video review of IPS, and errors. Study methodology and bias were judged by Medical Education Research Study Quality Instrument and the Quality Assessment of Diagnostic Accuracy Studies criteria. There were no differences (p ≥ 0.5) in IPS for AA, FA, FAS, whether evaluators were colocated or reviewed video recordings. Evaluator consistency was 0.29 (BA) - 0.77 (FA). Video and colocated evaluators were in total agreement (p = 1.0) for error recognition. Intraclass correlation coefficient was 0.73 to 0.92, dependent on procedure. Correlations video versus colocated evaluations were 0.5 to 0.9. Except for BA, blinded video evaluators discriminated (p competency. Prognostic study, level II.

Range-Measuring Video Sensors

Science.gov (United States)

Howard, Richard T.; Briscoe, Jeri M.; Corder, Eric L.; Broderick, David

2006-01-01

Optoelectronic sensors of a proposed type would perform the functions of both electronic cameras and triangulation- type laser range finders. That is to say, these sensors would both (1) generate ordinary video or snapshot digital images and (2) measure the distances to selected spots in the images. These sensors would be well suited to use on robots that are required to measure distances to targets in their work spaces. In addition, these sensors could be used for all the purposes for which electronic cameras have been used heretofore. The simplest sensor of this type, illustrated schematically in the upper part of the figure, would include a laser, an electronic camera (either video or snapshot), a frame-grabber/image-capturing circuit, an image-data-storage memory circuit, and an image-data processor. There would be no moving parts. The laser would be positioned at a lateral distance d to one side of the camera and would be aimed parallel to the optical axis of the camera. When the range of a target in the field of view of the camera was required, the laser would be turned on and an image of the target would be stored and preprocessed to locate the angle (a) between the optical axis and the line of sight to the centroid of the laser spot.

CRED Fish Observations from Stereo Video Cameras on a SeaBED AUV collected around Tutuila, American Samoa in 2012

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Black and white imagery were collected using a stereo pair of underwater video cameras mounted on a SeaBED autonomous underwater vehicle (AUV) and deployed around...

Light-reflection random-target method for measurement of the modulation transfer function of a digital video-camera

Czech Academy of Sciences Publication Activity Database

Pospíšil, Jaroslav; Jakubík, P.; Machala, L.

2005-01-01

Roč. 116, - (2005), s. 573-585 ISSN 0030-4026 Institutional research plan: CEZ:AV0Z10100522 Keywords : random-target measuring method * light-reflection white - noise target * digital video camera * modulation transfer function * power spectral density Subject RIV: BH - Optics, Masers, Lasers Impact factor: 0.395, year: 2005

VideoSET: Video Summary Evaluation through Text

OpenAIRE

Yeung, Serena; Fathi, Alireza; Fei-Fei, Li

2014-01-01

In this paper we present VideoSET, a method for Video Summary Evaluation through Text that can evaluate how well a video summary is able to retain the semantic information contained in its original video. We observe that semantics is most easily expressed in words, and develop a text-based approach for the evaluation. Given a video summary, a text representation of the video summary is first generated, and an NLP-based metric is then used to measure its semantic distance to ground-truth text ...

Methods and Algorithms for Detecting Objects in Video Files

Directory of Open Access Journals (Sweden)

Nguyen The Cuong

2018-01-01

Full Text Available Video files are files that store motion pictures and sounds like in real life. In today's world, the need for automated processing of information in video files is increasing. Automated processing of information has a wide range of application including office/home surveillance cameras, traffic control, sports applications, remote object detection, and others. In particular, detection and tracking of object movement in video file plays an important role. This article describes the methods of detecting objects in video files. Today, this problem in the field of computer vision is being studied worldwide.

From different angles : Exploring and applying the design potential of video

NARCIS (Netherlands)

Pasman, G.J.

2012-01-01

Recent developments in both hardware and software have brought video within the scope of design students as a new visual design tool. Being more and more equipped with cameras, for example in their smartphones, and video editing programs on their computers, they are increasing using video to record

Video quality of 3G videophones for telephone cardiopulmonary resuscitation.

Science.gov (United States)

Tränkler, Uwe; Hagen, Oddvar; Horsch, Alexander

2008-01-01

We simulated a cardiopulmonary resuscitation (CPR) scene with a manikin and used two 3G videophones on the caller's side to transmit video to a laptop PC. Five observers (two doctors with experience in emergency medicine and three paramedics) evaluated the video. They judged whether the manikin was breathing and whether they would give advice for CPR; they also graded the confidence of their decision-making. Breathing was only visible from certain orientations of the videophones, at distances below 150 cm with good illumination and a still background. Since the phones produced a degradation in colours and shadows, detection of breathing mainly depended on moving contours. Low camera positioning produced better results than having the camera high up. Darkness, shaking of the camera and a moving background made detection of breathing almost impossible. The video from the two 3G videophones that were tested was of sufficient quality for telephone CPR provided that camera orientation, distance, illumination and background were carefully chosen. Thus it seems possible to use 3G videophones for emergency calls involving CPR. However, further studies on the required video quality in different scenarios are necessary.

Using Photogrammetry to Estimate Tank Waste Volumes from Video

Energy Technology Data Exchange (ETDEWEB)

Field, Jim G. [Washington River Protection Solutions, LLC, Richland, WA (United States)

2013-03-27

Washington River Protection Solutions (WRPS) contracted with HiLine Engineering & Fabrication, Inc. to assess the accuracy of photogrammetry tools as compared to video Camera/CAD Modeling System (CCMS) estimates. This test report documents the results of using photogrammetry to estimate the volume of waste in tank 241-C-I04 from post-retrieval videos and results using photogrammetry to estimate the volume of waste piles in the CCMS test video.

Using Photogrammetry to Estimate Tank Waste Volumes from Video

International Nuclear Information System (INIS)

Field, Jim G.

2013-01-01

Washington River Protection Solutions (WRPS) contracted with HiLine Engineering and Fabrication, Inc. to assess the accuracy of photogrammetry tools as compared to video Camera/CAD Modeling System (CCMS) estimates. This test report documents the results of using photogrammetry to estimate the volume of waste in tank 241-C-I04 from post-retrieval videos and results using photogrammetry to estimate the volume of waste piles in the CCMS test video

Collaborative real-time scheduling of multiple PTZ cameras for multiple object tracking in video surveillance

Science.gov (United States)

Liu, Yu-Che; Huang, Chung-Lin

2013-03-01

This paper proposes a multi-PTZ-camera control mechanism to acquire close-up imagery of human objects in a surveillance system. The control algorithm is based on the output of multi-camera, multi-target tracking. Three main concerns of the algorithm are (1) the imagery of human object's face for biometric purposes, (2) the optimal video quality of the human objects, and (3) minimum hand-off time. Here, we define an objective function based on the expected capture conditions such as the camera-subject distance, pan tile angles of capture, face visibility and others. Such objective function serves to effectively balance the number of captures per subject and quality of captures. In the experiments, we demonstrate the performance of the system which operates in real-time under real world conditions on three PTZ cameras.

Surgeon-Manipulated Live Surgery Video Recording Apparatuses: Personal Experience and Review of Literature.

Science.gov (United States)

Kapi, Emin

2017-06-01

Visual recording of surgical procedures is a method that is used quite frequently in practices of plastic surgery. While presentations containing photographs are quite common in education seminars and congresses, video-containing presentations find more favour. For this reason, the presentation of surgical procedures in the form of real-time video display has increased especially recently. Appropriate technical equipment for video recording is not available in most hospitals, so there is a need to set up external apparatus in the operating room. Among these apparatuses can be listed such options as head-mounted video cameras, chest-mounted cameras, and tripod-mountable cameras. The head-mounted video camera is an apparatus that is capable of capturing high-resolution and detailed close-up footage. The tripod-mountable camera enables video capturing from a fixed point. Certain user-specific modifications can be made to overcome some of these restrictions. Among these modifications, custom-made applications are one of the most effective solutions. The article makes an attempt to present the features and experiences concerning the use of a combination of a head- or chest-mounted action camera, a custom-made portable tripod apparatus of versatile features, and an underwater camera. The descriptions we used are quite easy-to-assembly, quickly installed, and inexpensive apparatuses that do not require specific technical knowledge and can be manipulated by the surgeon personally in all procedures. The author believes that video recording apparatuses will be integrated more to the operating room, become a standard practice, and become more enabling for self-manipulation by the surgeon in the near future. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A Novel High Efficiency Fractal Multiview Video Codec

Directory of Open Access Journals (Sweden)

Shiping Zhu

2015-01-01

Full Text Available Multiview video which is one of the main types of three-dimensional (3D video signals, captured by a set of video cameras from various viewpoints, has attracted much interest recently. Data compression for multiview video has become a major issue. In this paper, a novel high efficiency fractal multiview video codec is proposed. Firstly, intraframe algorithm based on the H.264/AVC intraprediction modes and combining fractal and motion compensation (CFMC algorithm in which range blocks are predicted by domain blocks in the previously decoded frame using translational motion with gray value transformation is proposed for compressing the anchor viewpoint video. Then temporal-spatial prediction structure and fast disparity estimation algorithm exploiting parallax distribution constraints are designed to compress the multiview video data. The proposed fractal multiview video codec can exploit temporal and spatial correlations adequately. Experimental results show that it can obtain about 0.36 dB increase in the decoding quality and 36.21% decrease in encoding bitrate compared with JMVC8.5, and the encoding time is saved by 95.71%. The rate-distortion comparisons with other multiview video coding methods also demonstrate the superiority of the proposed scheme.

Visual fatigue modeling for stereoscopic video shot based on camera motion

Science.gov (United States)

Shi, Guozhong; Sang, Xinzhu; Yu, Xunbo; Liu, Yangdong; Liu, Jing

2014-11-01

As three-dimensional television (3-DTV) and 3-D movie become popular, the discomfort of visual feeling limits further applications of 3D display technology. The cause of visual discomfort from stereoscopic video conflicts between accommodation and convergence, excessive binocular parallax, fast motion of objects and so on. Here, a novel method for evaluating visual fatigue is demonstrated. Influence factors including spatial structure, motion scale and comfortable zone are analyzed. According to the human visual system (HVS), people only need to converge their eyes to the specific objects for static cameras and background. Relative motion should be considered for different camera conditions determining different factor coefficients and weights. Compared with the traditional visual fatigue prediction model, a novel visual fatigue predicting model is presented. Visual fatigue degree is predicted using multiple linear regression method combining with the subjective evaluation. Consequently, each factor can reflect the characteristics of the scene, and the total visual fatigue score can be indicated according to the proposed algorithm. Compared with conventional algorithms which ignored the status of the camera, our approach exhibits reliable performance in terms of correlation with subjective test results.

Teasing Apart Complex Motions using VideoPoint

Science.gov (United States)

Fischer, Mark

2002-10-01

Using video analysis software such as VideoPoint, it is possible to explore the physics of any phenomenon that can be captured on videotape. The good news is that complex motions can be filmed and analyzed. The bad news is that the motions can become very complex very quickly. An example of such a complicated motion, the 2-dimensional motion of an object as filmed by a camera that is moving and rotating in the same plane will be discussed. Methods for extracting the desired object motion will be given as well as suggestions for shooting more easily analyzable video clips.

Neutron imaging system based on a video camera

International Nuclear Information System (INIS)

Dinca, M.

2004-01-01

The non-destructive testing with cold, thermal, epithermal or fast neutrons is nowadays more and more useful because the world-wide level of industrial development requires considerably higher standards of quality of manufactured products and reliability of technological processes especially where any deviation from standards could result in large-scale catastrophic consequences or human loses. Thanks to their properties, easily obtained and very good discrimination of the materials that penetrate, the thermal neutrons are the most used probe. The methods involved for this technique have advanced from neutron radiography based on converter screens and radiological films to neutron radioscopy based on video cameras, that is, from static images to dynamic images. Many neutron radioscopy systems have been used in the past with various levels of success. The quality of an image depends on the quality of the neutron beam and the type of the neutron imaging system. For real time investigations there are involved tube type cameras, CCD cameras and recently CID cameras that capture the image from an appropriate scintillator through the agency of a mirror. The analog signal of the camera is then converted into digital signal by the signal processing technology included into the camera. The image acquisition card or frame grabber from a PC converts the digital signal into an image. The image is formatted and processed by image analysis software. The scanning position of the object is controlled by the computer that commands the electrical motors that move horizontally, vertically and rotate the table of the object. Based on this system, a lot of static image acquisitions, real time non-destructive investigations of dynamic processes and finally, tomographic investigations of the small objects are done in a short time. A system based on a CID camera is presented. Fundamental differences between CCD and CID cameras lie in their pixel readout structure and technique. CIDs

Motion video analysis using planar parallax

Science.gov (United States)

Sawhney, Harpreet S.

1994-04-01

Motion and structure analysis in video sequences can lead to efficient descriptions of objects and their motions. Interesting events in videos can be detected using such an analysis--for instance independent object motion when the camera itself is moving, figure-ground segregation based on the saliency of a structure compared to its surroundings. In this paper we present a method for 3D motion and structure analysis that uses a planar surface in the environment as a reference coordinate system to describe a video sequence. The motion in the video sequence is described as the motion of the reference plane, and the parallax motion of all the non-planar components of the scene. It is shown how this method simplifies the otherwise hard general 3D motion analysis problem. In addition, a natural coordinate system in the environment is used to describe the scene which can simplify motion based segmentation. This work is a part of an ongoing effort in our group towards video annotation and analysis for indexing and retrieval. Results from a demonstration system being developed are presented.

Real-time unmanned aircraft systems surveillance video mosaicking using GPU

Science.gov (United States)

Camargo, Aldo; Anderson, Kyle; Wang, Yi; Schultz, Richard R.; Fevig, Ronald A.

2010-04-01

Digital video mosaicking from Unmanned Aircraft Systems (UAS) is being used for many military and civilian applications, including surveillance, target recognition, border protection, forest fire monitoring, traffic control on highways, monitoring of transmission lines, among others. Additionally, NASA is using digital video mosaicking to explore the moon and planets such as Mars. In order to compute a "good" mosaic from video captured by a UAS, the algorithm must deal with motion blur, frame-to-frame jitter associated with an imperfectly stabilized platform, perspective changes as the camera tilts in flight, as well as a number of other factors. The most suitable algorithms use SIFT (Scale-Invariant Feature Transform) to detect the features consistent between video frames. Utilizing these features, the next step is to estimate the homography between two consecutives video frames, perform warping to properly register the image data, and finally blend the video frames resulting in a seamless video mosaick. All this processing takes a great deal of resources of resources from the CPU, so it is almost impossible to compute a real time video mosaic on a single processor. Modern graphics processing units (GPUs) offer computational performance that far exceeds current CPU technology, allowing for real-time operation. This paper presents the development of a GPU-accelerated digital video mosaicking implementation and compares it with CPU performance. Our tests are based on two sets of real video captured by a small UAS aircraft; one video comes from Infrared (IR) and Electro-Optical (EO) cameras. Our results show that we can obtain a speed-up of more than 50 times using GPU technology, so real-time operation at a video capture of 30 frames per second is feasible.

Authentication Approaches for Standoff Video Surveillance

International Nuclear Information System (INIS)

Baldwin, G.; Sweatt, W.; Thomas, M.

2015-01-01

Video surveillance for international nuclear safeguards applications requires authentication, which confirms to an inspector reviewing the surveillance images that both the source and the integrity of those images can be trusted. To date, all such authentication approaches originate at the camera. Camera authentication would not suffice for a ''standoff video'' application, where the surveillance camera views an image piped to it from a distant objective lens. Standoff video might be desired in situations where it does not make sense to expose sensitive and costly camera electronics to contamination, radiation, water immersion, or other adverse environments typical of hot cells, reprocessing facilities, and within spent fuel pools, for example. In this paper, we offer optical architectures that introduce a standoff distance of several metres between the scene and camera. Several schemes enable one to authenticate not only that the extended optical path is secure, but also that the scene is being viewed live. They employ optical components with remotely-operated spectral, temporal, directional, and intensity properties that are under the control of the inspector. If permitted by the facility operator, illuminators, reflectors and polarizers placed in the scene offer further possibilities. Any tampering that would insert an alternative image source for the camera, although undetectable with conventional cryptographic authentication of digital camera data, is easily exposed using the approaches we describe. Sandia National Laboratories is a multi-programme laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Support to Sandia National Laboratories provided by the NNSA Next Generation Safeguards Initiative is gratefully acknowledged. SAND2014-3196 A. (author)

MPEG-2 Compressed-Domain Algorithms for Video Analysis

Directory of Open Access Journals (Sweden)

Hesseler Wolfgang

2006-01-01

Full Text Available This paper presents new algorithms for extracting metadata from video sequences in the MPEG-2 compressed domain. Three algorithms for efficient low-level metadata extraction in preprocessing stages are described. The first algorithm detects camera motion using the motion vector field of an MPEG-2 video. The second method extends the idea of motion detection to a limited region of interest, yielding an efficient algorithm to track objects inside video sequences. The third algorithm performs a cut detection using macroblock types and motion vectors.

MovieRemix: Having Fun Playing with Videos

Directory of Open Access Journals (Sweden)

Nicola Dusi

2011-01-01

scenario. Known as remix or video remix, the produced video may have new and different meanings with respect to the source material. Unfortunately, when managing audiovisual objects, the technological aspect can be a burden for many creative users. Motivated by the large success of the gaming market, we propose a novel game and an architecture to make the remix process a pleasant and stimulating gaming experience. MovieRemix allows people to act like a movie director, but instead of dealing with cast and cameras, the player has to create a remixed video starting from a given screenplay and from video shots retrieved from the provided catalog. MovieRemix is not a simple video editing tool nor is a simple game: it is a challenging environment that stimulates creativity. To temp to play the game, players can access different levels of screenplay (original, outline, derived and can also challenge other players. Computational and storage issues are kept at the server side, whereas the client device just needs to have the capability of playing streaming videos.

Summarization of Surveillance Video Sequences Using Face Quality Assessment

DEFF Research Database (Denmark)

Nasrollahi, Kamal; Moeslund, Thomas B.; Rahmati, Mohammad

2011-01-01

Constant working surveillance cameras in public places, such as airports and banks, produce huge amount of video data. Faces in such videos can be extracted in real time. However, most of these detected faces are either redundant or useless. Redundant information adds computational costs to facial...

Calibration grooming and alignment for LDUA High Resolution Stereoscopic Video Camera System (HRSVS)

International Nuclear Information System (INIS)

Pardini, A.F.

1998-01-01

The High Resolution Stereoscopic Video Camera System (HRSVS) was designed by the Savannah River Technology Center (SRTC) to provide routine and troubleshooting views of tank interiors during characterization and remediation phases of underground storage tank (UST) processing. The HRSVS is a dual color camera system designed to provide stereo viewing of the interior of the tanks including the tank wall in a Class 1, Division 1, flammable atmosphere. The HRSVS was designed with a modular philosophy for easy maintenance and configuration modifications. During operation of the system with the LDUA, the control of the camera system will be performed by the LDUA supervisory data acquisition system (SDAS). Video and control status 1458 will be displayed on monitors within the LDUA control center. All control functions are accessible from the front panel of the control box located within the Operations Control Trailer (OCT). The LDUA will provide all positioning functions within the waste tank for the end effector. Various electronic measurement instruments will be used to perform CG and A activities. The instruments may include a digital volt meter, oscilloscope, signal generator, and other electronic repair equipment. None of these instruments will need to be calibrated beyond what comes from the manufacturer. During CG and A a temperature indicating device will be used to measure the temperature of the outside of the HRSVS from initial startup until the temperature has stabilized. This device will not need to be in calibration during CG and A but will have to have a current calibration sticker from the Standards Laboratory during any acceptance testing. This sensor will not need to be in calibration during CG and A but will have to have a current calibration sticker from the Standards Laboratory during any acceptance testing

Modeling 3D Unknown object by Range Finder and Video Camera ...

African Journals Online (AJOL)

real world); proprioceptive and exteroceptive sensors allowing the recreating of the 3D geometric database of an environment (virtual world). The virtual world is projected onto a video display terminal (VDT). Computer-generated and video ...

Light-reflection random-target method for measurement of the modulation transfer function of a digital video-camera

Science.gov (United States)

Pospisil, J.; Jakubik, P.; Machala, L.

2005-11-01

This article reports the suggestion, realization and verification of the newly developed measuring means of the noiseless and locally shift-invariant modulation transfer function (MTF) of a digital video camera in a usual incoherent visible region of optical intensity, especially of its combined imaging, detection, sampling and digitizing steps which are influenced by the additive and spatially discrete photodetector, aliasing and quantization noises. Such means relates to the still camera automatic working regime and static two-dimensional spatially continuous light-reflection random target of white-noise property. The introduced theoretical reason for such a random-target method is also performed under exploitation of the proposed simulation model of the linear optical intensity response and possibility to express the resultant MTF by a normalized and smoothed rate of the ascertainable output and input power spectral densities. The random-target and resultant image-data were obtained and processed by means of a processing and evaluational PC with computation programs developed on the basis of MATLAB 6.5E The present examples of results and other obtained results of the performed measurements demonstrate the sufficient repeatability and acceptability of the described method for comparative evaluations of the performance of digital video cameras under various conditions.

Virtual displays for 360-degree video

Science.gov (United States)

Gilbert, Stephen; Boonsuk, Wutthigrai; Kelly, Jonathan W.

2012-03-01

In this paper we describe a novel approach for comparing users' spatial cognition when using different depictions of 360- degree video on a traditional 2D display. By using virtual cameras within a game engine and texture mapping of these camera feeds to an arbitrary shape, we were able to offer users a 360-degree interface composed of four 90-degree views, two 180-degree views, or one 360-degree view of the same interactive environment. An example experiment is described using these interfaces. This technique for creating alternative displays of wide-angle video facilitates the exploration of how compressed or fish-eye distortions affect spatial perception of the environment and can benefit the creation of interfaces for surveillance and remote system teleoperation.

Acquisition, compression and rendering of depth and texture for multi-view video

NARCIS (Netherlands)

Morvan, Y.

2009-01-01

Three-dimensional (3D) video and imaging technologies is an emerging trend in the development of digital video systems, as we presently witness the appearance of 3D displays, coding systems, and 3D camera setups. Three-dimensional multi-view video is typically obtained from a set of synchronized

Video repairing under variable illumination using cyclic motions.

Science.gov (United States)

Jia, Jiaya; Tai, Yu-Wing; Wu, Tai-Pang; Tang, Chi-Keung

2006-05-01

This paper presents a complete system capable of synthesizing a large number of pixels that are missing due to occlusion or damage in an uncalibrated input video. These missing pixels may correspond to the static background or cyclic motions of the captured scene. Our system employs user-assisted video layer segmentation, while the main processing in video repair is fully automatic. The input video is first decomposed into the color and illumination videos. The necessary temporal consistency is maintained by tensor voting in the spatio-temporal domain. Missing colors and illumination of the background are synthesized by applying image repairing. Finally, the occluded motions are inferred by spatio-temporal alignment of collected samples at multiple scales. We experimented on our system with some difficult examples with variable illumination, where the capturing camera can be stationary or in motion.

Design and evaluation of controls for drift, video gain, and color balance in spaceborne facsimile cameras

Science.gov (United States)

Katzberg, S. J.; Kelly, W. L., IV; Rowland, C. W.; Burcher, E. E.

1973-01-01

The facsimile camera is an optical-mechanical scanning device which has become an attractive candidate as an imaging system for planetary landers and rovers. This paper presents electronic techniques which permit the acquisition and reconstruction of high quality images with this device, even under varying lighting conditions. These techniques include a control for low frequency noise and drift, an automatic gain control, a pulse-duration light modulation scheme, and a relative spectral gain control. Taken together, these techniques allow the reconstruction of radiometrically accurate and properly balanced color images from facsimile camera video data. These techniques have been incorporated into a facsimile camera and reproduction system, and experimental results are presented for each technique and for the complete system.

Distributed Video Coding for Multiview and Video-plus-depth Coding

DEFF Research Database (Denmark)

Salmistraro, Matteo

The interest in Distributed Video Coding (DVC) systems has grown considerably in the academic world in recent years. With DVC the correlation between frames is exploited at the decoder (joint decoding). The encoder codes the frame independently, performing relatively simple operations. Therefore......, with DVC the complexity is shifted from encoder to decoder, making the coding architecture a viable solution for encoders with limited resources. DVC may empower new applications which can benefit from this reversed coding architecture. Multiview Distributed Video Coding (M-DVC) is the application...... of the to-be-decoded frame. Another key element is the Residual estimation, indicating the reliability of the SI, which is used to calculate the parameters of the correlation noise model between SI and original frame. In this thesis new methods for Inter-camera SI generation are analyzed in the Stereo...

Video-assisted functional assessment of index pollicisation in congenital anomalies.

Science.gov (United States)

Mas, Virginie; Ilharreborde, Brice; Mallet, Cindy; Mazda, Keyvan; Simon, Anne-Laure; Jehanno, Pascal

2016-08-01

Functional results of index pollicisation are usually assessed by the clinical score of Percival. This score is based on elementary hand movements and does not reflect the function of the neo thumb in daily life activities. The aim of this study was to develop a new video-assisted scoring system based on daily life activities to assess index pollicisation functional outcomes. Twenty-two consecutive children, operated between 1998 and 2012, were examined with a mean of 77 months after surgery. The mean age at surgery was 34 months. Post-operative results were evaluated by a new video-assisted 14-point scoring system consisting of seven basic tasks that are frequently used in daily activities. The series of tasks was performed both on the request of the examiner and in real-life conditions with the use of a hidden camera. Each video recording was examined by three different examiners. Each examiner rated the video recordings three times, with an interval of one week between examinations. Inter- and intra-observer agreements were calculated. Inter- and intra-observer agreements were excellent both on request (κ = 0.87 [0.84-0.97] for inter-observer agreement and 0.92 [0.82-0.98] for intra-observer agreement) and on hidden camera (κ = 0.83 [0.78-0.91] for inter-observer agreement and 0.89 [0.83-0.96] for intra-observer agreement). The results were significantly better on request than on hidden camera (p = 0.045). The correlation between the video-assisted scoring system and the Percival score was poor. The video-assisted scoring system is a reliable tool to assess index pollicisation functional outcomes. The scoring system on hidden camera is more representative of the neo thumb use in daily life complex movements. Level IV.

Integrating IPix immersive video surveillance with unattended and remote monitoring (UNARM) systems

International Nuclear Information System (INIS)

Michel, K.D.; Klosterbuer, S.F.; Langner, D.C.

2004-01-01

Commercially available IPix cameras and software are being researched as a means by which an inspector can be virtually immersed into a nuclear facility. A single IPix camera can provide 360 by 180 degree views with full pan-tilt-zoom capability, and with no moving parts on the camera mount. Immersive video technology can be merged into the current Unattended and Remote Monitoring (UNARM) system, thereby providing an integrated system of monitoring capabilities that tie together radiation, video, isotopic analysis, Global Positioning System (GPS), etc. The integration of the immersive video capability with other monitoring methods already in place provides a significantly enhanced situational awareness to the International Atomic Energy Agency (IAEA) inspectors.

Video Capture of Plastic Surgery Procedures Using the GoPro HERO 3+

Directory of Open Access Journals (Sweden)

Steven Nicholas Graves, MA

2015-02-01

Conclusions: The GoPro HERO 3+ Black Edition camera enables high-quality, cost-effective video recording of plastic and reconstructive surgery procedures. When set to a narrow field of view and automatic white balance, the camera is able to sufficiently compensate for the contrasting light environment of the operating room and capture high-resolution, detailed video.

Video Surveillance in Mental Health Facilities: Is it Ethical?

Science.gov (United States)

Stolovy, Tali; Melamed, Yuval; Afek, Arnon

2015-05-01

Video surveillance is a tool for managing safety and security within public spaces. In mental health facilities, the major benefit of video surveillance is that it enables 24 hour monitoring of patients, which has the potential to reduce violent and aggressive behavior. The major disadvantage is that such observation is by nature intrusive. It diminishes privacy, a factor of huge importance for psychiatric inpatients. Thus, an ongoing debate has developed following the increasing use of cameras in this setting. This article presents the experience of a medium-large academic state hospital that uses video surveillance, and explores the various ethical and administrative aspects of video surveillance in mental health facilities.

Geographic Video 3d Data Model And Retrieval

Science.gov (United States)

Han, Z.; Cui, C.; Kong, Y.; Wu, H.

2014-04-01

Geographic video includes both spatial and temporal geographic features acquired through ground-based or non-ground-based cameras. With the popularity of video capture devices such as smartphones, the volume of user-generated geographic video clips has grown significantly and the trend of this growth is quickly accelerating. Such a massive and increasing volume poses a major challenge to efficient video management and query. Most of the today's video management and query techniques are based on signal level content extraction. They are not able to fully utilize the geographic information of the videos. This paper aimed to introduce a geographic video 3D data model based on spatial information. The main idea of the model is to utilize the location, trajectory and azimuth information acquired by sensors such as GPS receivers and 3D electronic compasses in conjunction with video contents. The raw spatial information is synthesized to point, line, polygon and solid according to the camcorder parameters such as focal length and angle of view. With the video segment and video frame, we defined the three categories geometry object using the geometry model of OGC Simple Features Specification for SQL. We can query video through computing the spatial relation between query objects and three categories geometry object such as VFLocation, VSTrajectory, VSFOView and VFFovCone etc. We designed the query methods using the structured query language (SQL) in detail. The experiment indicate that the model is a multiple objective, integration, loosely coupled, flexible and extensible data model for the management of geographic stereo video.

Content-based video retrieval by example video clip

Science.gov (United States)

Dimitrova, Nevenka; Abdel-Mottaleb, Mohamed

1997-01-01

This paper presents a novel approach for video retrieval from a large archive of MPEG or Motion JPEG compressed video clips. We introduce a retrieval algorithm that takes a video clip as a query and searches the database for clips with similar contents. Video clips are characterized by a sequence of representative frame signatures, which are constructed from DC coefficients and motion information (`DC+M' signatures). The similarity between two video clips is determined by using their respective signatures. This method facilitates retrieval of clips for the purpose of video editing, broadcast news retrieval, or copyright violation detection.

First results on video meteors from Crete, Greece

Science.gov (United States)

Maravelias, G.

2012-01-01

This work presents the first systematic video meteor observations from a, forthcoming permanent, station in Crete, Greece, operating as the first official node within the International Meteor Organization's Video Network. It consists of a Watec 902 H2 Ultimate camera equipped with a Panasonic WV-LA1208 (focal length 12mm, f/0.8) lens running MetRec. The system operated for 42 nights during 2011 (August 19-December 30, 2011) recording 1905 meteors. It is significantly more performant than a previous system used by the author during the Perseids 2010 (DMK camera 21AF04.AS by The Imaging Source, CCTV lens of focal length 2.8 mm, UFO Capture v2.22), which operated for 17 nights (August 4-22, 2010) recording 32 meteors. Differences - according to the author's experience - between the two softwares (MetRec, UFO Capture) are discussed along with a small guide to video meteor hardware.

Non-Cooperative Facial Recognition Video Dataset Collection Plan

Energy Technology Data Exchange (ETDEWEB)

Kimura, Marcia L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Erikson, Rebecca L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lombardo, Nicholas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-08-31

The Pacific Northwest National Laboratory (PNNL) will produce a non-cooperative (i.e. not posing for the camera) facial recognition video data set for research purposes to evaluate and enhance facial recognition systems technology. The aggregate data set consists of 1) videos capturing PNNL role players and public volunteers in three key operational settings, 2) photographs of the role players for enrolling in an evaluation database, and 3) ground truth data that documents when the role player is within various camera fields of view. PNNL will deliver the aggregate data set to DHS who may then choose to make it available to other government agencies interested in evaluating and enhancing facial recognition systems. The three operational settings that will be the focus of the video collection effort include: 1) unidirectional crowd flow 2) bi-directional crowd flow, and 3) linear and/or serpentine queues.

Automatic video surveillance of outdoor scenes using track before detect

DEFF Research Database (Denmark)

Hansen, Morten; Sørensen, Helge Bjarup Dissing; Birkemark, Christian M.

2005-01-01

This paper concerns automatic video surveillance of outdoor scenes using a single camera. The first step in automatic interpretation of the video stream is activity detection based on background subtraction. Usually, this process will generate a large number of false alarms in outdoor scenes due...

A video Hartmann wavefront diagnostic that incorporates a monolithic microlens array

International Nuclear Information System (INIS)

Toeppen, J.S.; Bliss, E.S.; Long, T.W.; Salmon, J.T.

1991-07-01

we have developed a video Hartmann wavefront sensor that incorporates a monolithic array of microlenses as the focusing elements. The sensor uses a monolithic array of photofabricated lenslets. Combined with a video processor, this system reveals local gradients of the wavefront at a video frame rate of 30 Hz. Higher bandwidth is easily attainable with a camera and video processor that have faster frame rates. When used with a temporal filter, the reconstructed wavefront error is less than 1/10th wave

Storage, access, and retrieval of endoscopic and laparoscopic video

Science.gov (United States)

Bellaire, Gunter; Steines, Daniel; Graschew, Georgi; Thiel, Andreas; Bernarding, Johannes; Tolxdorff, Thomas; Schlag, Peter M.

1999-05-01

The system presented here enhances documentation and data- secured, second-opinion facilities by integrating video into DICOM3.0. Digital stereoscopic video sequences (DSVS) are especially in demand for surgery (laparoscopy, microsurgery, surgical microscopy, second opinion, virtual reality). Therefore DSVS are also integrated into the DICOM video concept. We present an implementation for a medical video server extended by a DICOM interface. Security mechanisms conforming with DICOM are integrated to enable secure internet access. Digital (stereoscopic) video sequences relevant for surgery should be examined regarding the clip length necessary for diagnosis and documentation and the clip size manageable with today's hardware. Methods for DSVS compression are described, implemented, and tested. Image sources relevant for this paper include, among others, a stereoscopic laparoscope and a monoscopic endoscope. Additionally, an approach is presented to analyze the motion of the endoscopic camera for future automatic video- cutting.

Immersive video

Science.gov (United States)

Moezzi, Saied; Katkere, Arun L.; Jain, Ramesh C.

1996-03-01

Interactive video and television viewers should have the power to control their viewing position. To make this a reality, we introduce the concept of Immersive Video, which employs computer vision and computer graphics technologies to provide remote users a sense of complete immersion when viewing an event. Immersive Video uses multiple videos of an event, captured from different perspectives, to generate a full 3D digital video of that event. That is accomplished by assimilating important information from each video stream into a comprehensive, dynamic, 3D model of the environment. Using this 3D digital video, interactive viewers can then move around the remote environment and observe the events taking place from any desired perspective. Our Immersive Video System currently provides interactive viewing and `walkthrus' of staged karate demonstrations, basketball games, dance performances, and typical campus scenes. In its full realization, Immersive Video will be a paradigm shift in visual communication which will revolutionize television and video media, and become an integral part of future telepresence and virtual reality systems.

Advanced digital video surveillance for safeguard and physical protection

International Nuclear Information System (INIS)

Kumar, R.

2002-01-01

Full text: Video surveillance is a very crucial component in safeguard and physical protection. Digital technology has revolutionized the surveillance scenario and brought in various new capabilities like better image quality, faster search and retrieval of video images, less storage space for recording, efficient transmission and storage of video, better protection of recorded video images, and easy remote accesses to live and recorded video etc. The basic safeguard requirement for verifiably uninterrupted surveillance has remained largely unchanged since its inception. However, changes to the inspection paradigm to admit automated review and remote monitoring have dramatically increased the demands on safeguard surveillance system. Today's safeguard systems can incorporate intelligent motion detection with very low rate of false alarm and less archiving volume, embedded image processing capability for object behavior and event based indexing, object recognition, efficient querying and report generation etc. It also demands cryptographically authenticating, encrypted, and highly compressed video data for efficient, secure, tamper indicating and transmission. In physical protection, intelligent on robust video motion detection, real time moving object detection and tracking from stationary and moving camera platform, multi-camera cooperative tracking, activity detection and recognition, human motion analysis etc. is going to play a key rote in perimeter security. Incorporation of front and video imagery exploitation tools like automatic number plate recognition, vehicle identification and classification, vehicle undercarriage inspection, face recognition, iris recognition and other biometric tools, gesture recognition etc. makes personnel and vehicle access control robust and foolproof. Innovative digital image enhancement techniques coupled with novel sensor design makes low cost, omni-directional vision capable, all weather, day night surveillance a reality

System design description for the LDUA high resolution stereoscopic video camera system (HRSVS)

International Nuclear Information System (INIS)

Pardini, A.F.

1998-01-01

The High Resolution Stereoscopic Video Camera System (HRSVS), system 6230, was designed to be used as an end effector on the LDUA to perform surveillance and inspection activities within a waste tank. It is attached to the LDUA by means of a Tool Interface Plate (TIP) which provides a feed through for all electrical and pneumatic utilities needed by the end effector to operate. Designed to perform up close weld and corrosion inspection roles in US T operations, the HRSVS will support and supplement the Light Duty Utility Arm (LDUA) and provide the crucial inspection tasks needed to ascertain waste tank condition

Multi-view video segmentation and tracking for video surveillance

Science.gov (United States)

Mohammadi, Gelareh; Dufaux, Frederic; Minh, Thien Ha; Ebrahimi, Touradj

2009-05-01

Tracking moving objects is a critical step for smart video surveillance systems. Despite the complexity increase, multiple camera systems exhibit the undoubted advantages of covering wide areas and handling the occurrence of occlusions by exploiting the different viewpoints. The technical problems in multiple camera systems are several: installation, calibration, objects matching, switching, data fusion, and occlusion handling. In this paper, we address the issue of tracking moving objects in an environment covered by multiple un-calibrated cameras with overlapping fields of view, typical of most surveillance setups. Our main objective is to create a framework that can be used to integrate objecttracking information from multiple video sources. Basically, the proposed technique consists of the following steps. We first perform a single-view tracking algorithm on each camera view, and then apply a consistent object labeling algorithm on all views. In the next step, we verify objects in each view separately for inconsistencies. Correspondent objects are extracted through a Homography transform from one view to the other and vice versa. Having found the correspondent objects of different views, we partition each object into homogeneous regions. In the last step, we apply the Homography transform to find the region map of first view in the second view and vice versa. For each region (in the main frame and mapped frame) a set of descriptors are extracted to find the best match between two views based on region descriptors similarity. This method is able to deal with multiple objects. Track management issues such as occlusion, appearance and disappearance of objects are resolved using information from all views. This method is capable of tracking rigid and deformable objects and this versatility lets it to be suitable for different application scenarios.

Motion-Blur-Free High-Speed Video Shooting Using a Resonant Mirror

Directory of Open Access Journals (Sweden)

Michiaki Inoue

2017-10-01

Full Text Available This study proposes a novel concept of actuator-driven frame-by-frame intermittent tracking for motion-blur-free video shooting of fast-moving objects. The camera frame and shutter timings are controlled for motion blur reduction in synchronization with a free-vibration-type actuator vibrating with a large amplitude at hundreds of hertz so that motion blur can be significantly reduced in free-viewpoint high-frame-rate video shooting for fast-moving objects by deriving the maximum performance of the actuator. We develop a prototype of a motion-blur-free video shooting system by implementing our frame-by-frame intermittent tracking algorithm on a high-speed video camera system with a resonant mirror vibrating at 750 Hz. It can capture 1024 × 1024 images of fast-moving objects at 750 fps with an exposure time of 0.33 ms without motion blur. Several experimental results for fast-moving objects verify that our proposed method can reduce image degradation from motion blur without decreasing the camera exposure time.

Replicas Strategy and Cache Optimization of Video Surveillance Systems Based on Cloud Storage

Directory of Open Access Journals (Sweden)

Rongheng Li

2018-04-01

Full Text Available With the rapid development of video surveillance technology, especially the popularity of cloud-based video surveillance applications, video data begins to grow explosively. However, in the cloud-based video surveillance system, replicas occupy an amount of storage space. Also, the slow response to video playback constrains the performance of the system. In this paper, considering the characteristics of video data comprehensively, we propose a dynamic redundant replicas mechanism based on security levels that can dynamically adjust the number of replicas. Based on the location correlation between cameras, this paper also proposes a data cache strategy to improve the response speed of data reading. Experiments illustrate that: (1 our dynamic redundant replicas mechanism can save storage space while ensuring data security; (2 the cache mechanism can predict the playback behaviors of the users in advance and improve the response speed of data reading according to the location and time correlation of the front-end cameras; and (3 in terms of cloud-based video surveillance, our proposed approaches significantly outperform existing methods.

Video demystified

CERN Document Server

Jack, Keith

2004-01-01

This international bestseller and essential reference is the "bible" for digital video engineers and programmers worldwide. This is by far the most informative analog and digital video reference available, includes the hottest new trends and cutting-edge developments in the field. Video Demystified, Fourth Edition is a "one stop" reference guide for the various digital video technologies. The fourth edition is completely updated with all new chapters on MPEG-4, H.264, SDTV/HDTV, ATSC/DVB, and Streaming Video (Video over DSL, Ethernet, etc.), as well as discussions of the latest standards throughout. The accompanying CD-ROM is updated to include a unique set of video test files in the newest formats. *This essential reference is the "bible" for digital video engineers and programmers worldwide *Contains all new chapters on MPEG-4, H.264, SDTV/HDTV, ATSC/DVB, and Streaming Video *Completely revised with all the latest and most up-to-date industry standards.

Credibility and Authenticity of Digitally Signed Videos in Traffic

Directory of Open Access Journals (Sweden)

Ivan Grgurević

2008-11-01

Full Text Available The paper presents the possibilities of insuring the credibilityand authenticity of the surveillance camera video by digitalsigning, using the public key infrastructure as part of interoperabletraffic and information system in the future intelligenttransport systems. The surveillance camera video is a sequenceof individual frames and a unique digital print, i. e. hash valueis calculated for each of these. By encryption of the hash valuesof the frames using private encryption key of the surveillancecentre, digital signatures are created and they are stored in thedatabase. The surveillance centre can issue a copy of the videoto all the interested subjects for scientific and research workand investigation. Regardless of the scope, each subsequentmanipulation of the video copy contents will certainly changethe hash value of all the frames. The procedure of determiningthe authenticity and credibility of videos is reduced to the comparisonof the hash values of the frames stored in the databaseof the surveillance centre with the values obtained from the interestedsubjects such as the traffic experts and investigators,surveillance-security services etc.

Video pedagogy

OpenAIRE

Länsitie, Janne; Stevenson, Blair; Männistö, Riku; Karjalainen, Tommi; Karjalainen, Asko

2016-01-01

The short film is an introduction to the concept of video pedagogy. The five categories of video pedagogy further elaborate how videos can be used as a part of instruction and learning process. Most pedagogical videos represent more than one category. A video itself doesn’t necessarily define the category – the ways in which the video is used as a part of pedagogical script are more defining factors. What five categories did you find? Did you agree with the categories, or are more...

A practical implementation of free viewpoint video system for soccer games

Science.gov (United States)

Suenaga, Ryo; Suzuki, Kazuyoshi; Tezuka, Tomoyuki; Panahpour Tehrani, Mehrdad; Takahashi, Keita; Fujii, Toshiaki

2015-03-01

In this paper, we present a free viewpoint video generation system with billboard representation for soccer games. Free viewpoint video generation is a technology that enables users to watch 3-D objects from their desired viewpoints. Practical implementation of free viewpoint video for sports events is highly demanded. However, a commercially acceptable system has not yet been developed. The main obstacles are insufficient user-end quality of the synthesized images and highly complex procedures that sometimes require manual operations. In this work, we aim to develop a commercially acceptable free viewpoint video system with a billboard representation. A supposed scenario is that soccer games during the day can be broadcasted in 3-D, even in the evening of the same day. Our work is still ongoing. However, we have already developed several techniques to support our goal. First, we captured an actual soccer game at an official stadium where we used 20 full-HD professional cameras. Second, we have implemented several tools for free viewpoint video generation as follow. In order to facilitate free viewpoint video generation, all cameras should be calibrated. We calibrated all cameras using checker board images and feature points on the field (cross points of the soccer field lines). We extract each player region from captured images manually. The background region is estimated by observing chrominance changes of each pixel in temporal domain (automatically). Additionally, we have developed a user interface for visualizing free viewpoint video generation using a graphic library (OpenGL), which is suitable for not only commercialized TV sets but also devices such as smartphones. However, practical system has not yet been completed and our study is still ongoing.

First results of the multi-purpose real-time processing video camera system on the Wendelstein 7-X stellarator and implications for future devices

Science.gov (United States)

Zoletnik, S.; Biedermann, C.; Cseh, G.; Kocsis, G.; König, R.; Szabolics, T.; Szepesi, T.; Wendelstein 7-X Team

2018-01-01

A special video camera has been developed for the 10-camera overview video system of the Wendelstein 7-X (W7-X) stellarator considering multiple application needs and limitations resulting from this complex long-pulse superconducting stellarator experiment. The event detection intelligent camera (EDICAM) uses a special 1.3 Mpixel CMOS sensor with non-destructive read capability which enables fast monitoring of smaller Regions of Interest (ROIs) even during long exposures. The camera can perform simple data evaluation algorithms (minimum/maximum, mean comparison to levels) on the ROI data which can dynamically change the readout process and generate output signals. Multiple EDICAM cameras were operated in the first campaign of W7-X and capabilities were explored in the real environment. Data prove that the camera can be used for taking long exposure (10-100 ms) overview images of the plasma while sub-ms monitoring and even multi-camera correlated edge plasma turbulence measurements of smaller areas can be done in parallel. These latter revealed that filamentary turbulence structures extend between neighboring modules of the stellarator. Considerations emerging for future upgrades of this system and similar setups on future long-pulse fusion experiments such as ITER are discussed.

Cellphones in Classrooms Land Teachers on Online Video Sites

Science.gov (United States)

Honawar, Vaishali

2007-01-01

Videos of teachers that students taped in secrecy are all over online sites like YouTube and MySpace. Angry teachers, enthusiastic teachers, teachers clowning around, singing, and even dancing are captured, usually with camera phones, for the whole world to see. Some students go so far as to create elaborately edited videos, shot over several…

Architecture and Protocol of a Semantic System Designed for Video Tagging with Sensor Data in Mobile Devices

Science.gov (United States)

Macias, Elsa; Lloret, Jaime; Suarez, Alvaro; Garcia, Miguel

2012-01-01

Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper. PMID:22438753

Architecture and Protocol of a Semantic System Designed for Video Tagging with Sensor Data in Mobile Devices

Directory of Open Access Journals (Sweden)

Alvaro Suarez

2012-02-01

Full Text Available Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper.

Architecture and protocol of a semantic system designed for video tagging with sensor data in mobile devices.

Science.gov (United States)

Macias, Elsa; Lloret, Jaime; Suarez, Alvaro; Garcia, Miguel

2012-01-01

Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper.

Towards real-time remote processing of laparoscopic video

Science.gov (United States)

Ronaghi, Zahra; Duffy, Edward B.; Kwartowitz, David M.

2015-03-01

Laparoscopic surgery is a minimally invasive surgical technique where surgeons insert a small video camera into the patient's body to visualize internal organs and small tools to perform surgical procedures. However, the benefit of small incisions has a drawback of limited visualization of subsurface tissues, which can lead to navigational challenges in the delivering of therapy. Image-guided surgery (IGS) uses images to map subsurface structures and can reduce the limitations of laparoscopic surgery. One particular laparoscopic camera system of interest is the vision system of the daVinci-Si robotic surgical system (Intuitive Surgical, Sunnyvale, CA, USA). The video streams generate approximately 360 megabytes of data per second, demonstrating a trend towards increased data sizes in medicine, primarily due to higher-resolution video cameras and imaging equipment. Processing this data on a bedside PC has become challenging and a high-performance computing (HPC) environment may not always be available at the point of care. To process this data on remote HPC clusters at the typical 30 frames per second (fps) rate, it is required that each 11.9 MB video frame be processed by a server and returned within 1/30th of a second. The ability to acquire, process and visualize data in real-time is essential for performance of complex tasks as well as minimizing risk to the patient. As a result, utilizing high-speed networks to access computing clusters will lead to real-time medical image processing and improve surgical experiences by providing real-time augmented laparoscopic data. We aim to develop a medical video processing system using an OpenFlow software defined network that is capable of connecting to multiple remote medical facilities and HPC servers.

Blind identification of full-field vibration modes from video measurements with phase-based video motion magnification

Science.gov (United States)

Yang, Yongchao; Dorn, Charles; Mancini, Tyler; Talken, Zachary; Kenyon, Garrett; Farrar, Charles; Mascareñas, David

2017-02-01

Experimental or operational modal analysis traditionally requires physically-attached wired or wireless sensors for vibration measurement of structures. This instrumentation can result in mass-loading on lightweight structures, and is costly and time-consuming to install and maintain on large civil structures, especially for long-term applications (e.g., structural health monitoring) that require significant maintenance for cabling (wired sensors) or periodic replacement of the energy supply (wireless sensors). Moreover, these sensors are typically placed at a limited number of discrete locations, providing low spatial sensing resolution that is hardly sufficient for modal-based damage localization, or model correlation and updating for larger-scale structures. Non-contact measurement methods such as scanning laser vibrometers provide high-resolution sensing capacity without the mass-loading effect; however, they make sequential measurements that require considerable acquisition time. As an alternative non-contact method, digital video cameras are relatively low-cost, agile, and provide high spatial resolution, simultaneous, measurements. Combined with vision based algorithms (e.g., image correlation, optical flow), video camera based measurements have been successfully used for vibration measurements and subsequent modal analysis, based on techniques such as the digital image correlation (DIC) and the point-tracking. However, they typically require speckle pattern or high-contrast markers to be placed on the surface of structures, which poses challenges when the measurement area is large or inaccessible. This work explores advanced computer vision and video processing algorithms to develop a novel video measurement and vision-based operational (output-only) modal analysis method that alleviate the need of structural surface preparation associated with existing vision-based methods and can be implemented in a relatively efficient and autonomous manner with little

Sending Safety Video over WiMAX in Vehicle Communications

Directory of Open Access Journals (Sweden)

Jun Steed Huang

2013-10-01

Full Text Available This paper reports on the design of an OPNET simulation platform to test the performance of sending real-time safety video over VANET (Vehicular Adhoc NETwork using the WiMAX technology. To provide a more realistic environment for streaming real-time video, a video model was created based on the study of video traffic traces captured from a realistic vehicular camera, and different design considerations were taken into account. A practical controller over real-time streaming protocol is implemented to control data traffic congestion for future road safety development. Our driving video model was then integrated with the WiMAX OPNET model along with a mobility model based on real road maps. Using this simulation platform, different mobility cases have been studied and the performance evaluated in terms of end-to-end delay, jitter and visual experience.

FPGA-Based Real-Time Motion Detection for Automated Video Surveillance Systems

Directory of Open Access Journals (Sweden)

Sanjay Singh

2016-03-01

Full Text Available Design of automated video surveillance systems is one of the exigent missions in computer vision community because of their ability to automatically select frames of interest in incoming video streams based on motion detection. This research paper focuses on the real-time hardware implementation of a motion detection algorithm for such vision based automated surveillance systems. A dedicated VLSI architecture has been proposed and designed for clustering-based motion detection scheme. The working prototype of a complete standalone automated video surveillance system, including input camera interface, designed motion detection VLSI architecture, and output display interface, with real-time relevant motion detection capabilities, has been implemented on Xilinx ML510 (Virtex-5 FX130T FPGA platform. The prototyped system robustly detects the relevant motion in real-time in live PAL (720 × 576 resolution video streams directly coming from the camera.

Use of video taping during simulator training

International Nuclear Information System (INIS)

Helton, M.; Young, P.

1987-01-01

The use of a video camera for training is not a new idea and is used throughout the country for training in such areas as computers, car repair, music and even in such non-technical areas as fishing. Reviewing a taped simulator training session will aid the student in his job performance regardless of the position he holds in his organization. If the student is to be examined on simulator performance, video will aid in this training in many different ways

On the development of new SPMN diurnal video systems for daylight fireball monitoring

Science.gov (United States)

Madiedo, J. M.; Trigo-Rodríguez, J. M.; Castro-Tirado, A. J.

2008-09-01

Daylight fireball video monitoring High-sensitivity video devices are commonly used for the study of the activity of meteor streams during the night. These provide useful data for the determination, for instance, of radiant, orbital and photometric parameters ([1] to [7]). With this aim, during 2006 three automated video stations supported by Universidad de Huelva were set up in Andalusia within the framework of the SPanish Meteor Network (SPMN). These are endowed with 8-9 high sensitivity wide-field video cameras that achieve a meteor limiting magnitude of about +3. These stations have increased the coverage performed by the low-scan allsky CCD systems operated by the SPMN and, besides, achieve a time accuracy of about 0.01s for determining the appearance of meteor and fireball events. Despite of these nocturnal monitoring efforts, we realised the need of setting up stations for daylight fireball detection. Such effort was also motivated by the appearance of the two recent meteorite-dropping events of Villalbeto de la Peña [8,9] and Puerto Lápice [10]. Although the Villalbeto de la Peña event was casually videotaped, and photographed, no direct pictures or videos were obtained for the Puerto Lápice event. Consequently, in order to perform a continuous recording of daylight fireball events, we setup new automated systems based on CCD video cameras. However, the development of these video stations implies several issues with respect to nocturnal systems that must be properly solved in order to get an optimal operation. The first of these video stations, also supported by University of Huelva, has been setup in Sevilla (Andalusia) during May 2007. But, of course, fireball association is unequivocal only in those cases when two or more stations recorded the fireball, and when consequently the geocentric radiant is accurately determined. With this aim, a second diurnal video station is being setup in Andalusia in the facilities of Centro Internacional de Estudios y

Content Area Vocabulary Videos in Multiple Contexts: A Pedagogical Tool

Science.gov (United States)

Webb, C. Lorraine; Kapavik, Robin Robinson

2015-01-01

The authors challenged pre-service teachers to digitally define a social studies or mathematical vocabulary term in multiple contexts using a digital video camera. The researchers sought to answer the following questions: 1. How will creating a video for instruction affect pre-service teachers' attitudes about teaching with technology, if at all?…

Physics Girl: Where Education meets Cat Videos

Science.gov (United States)

Cowern, Dianna

YouTube is usually considered an entertainment medium to watch cats, gaming, and music videos. But educational channels have been gaining momentum on the platform, some garnering millions of subscribers and billions of views. The Physics Girl YouTube channel is an educational series with PBS Digital Studios created by Dianna Cowern. Using Physics Girl as an example, this talk will examine what it takes to start a short-form educational video series, including logistics and resources. One benefit of video is that every failure is documented on camera and can, and will, be used in this talk as a learning tool. We will look at the channels demographical reach, discuss best practices for effective physics outreach, and survey how online media and technology can facilitate good and bad learning. The aim of this talk is to show how videos are a unique way to share science and enrich the learning experience, in and out of a classroom.

Acceptance/operational test procedure 101-AW tank camera purge system and 101-AW video camera system

International Nuclear Information System (INIS)

Castleberry, J.L.

1994-01-01

This procedure will document the satisfactory operation of the 101-AW Tank Camera Purge System (CPS) and the 101-AW Video Camera System. The safety interlock which shuts down all the electronics inside the 101-AW vapor space, during loss of purge pressure, will be in place and tested to ensure reliable performance. This procedure is separated into four sections. Section 6.1 is performed in the 306 building prior to delivery to the 200 East Tank Farms and involves leak checking all fittings on the 101-AW Purge Panel for leakage using a Snoop solution and resolving the leakage. Section 7.1 verifies that PR-1, the regulator which maintains a positive pressure within the volume (cameras and pneumatic lines), is properly set. In addition the green light (PRESSURIZED) (located on the Purge Control Panel) is verified to turn on above 10 in. w.g. and after the time delay (TDR) has timed out. Section 7.2 verifies that the purge cycle functions properly, the red light (PURGE ON) comes on, and that the correct flowrate is obtained to meet the requirements of the National Fire Protection Association. Section 7.3 verifies that the pan and tilt, camera, associated controls and components operate correctly. This section also verifies that the safety interlock system operates correctly during loss of purge pressure. During the loss of purge operation the illumination of the amber light (PURGE FAILED) will be verified

Progress in passive submillimeter-wave video imaging

Science.gov (United States)

Heinz, Erik; May, Torsten; Born, Detlef; Zieger, Gabriel; Peiselt, Katja; Zakosarenko, Vyacheslav; Krause, Torsten; Krüger, André; Schulz, Marco; Bauer, Frank; Meyer, Hans-Georg

2014-06-01

Since 2007 we are developing passive submillimeter-wave video cameras for personal security screening. In contradiction to established portal-based millimeter-wave scanning techniques, these are suitable for stand-off or stealth operation. The cameras operate in the 350GHz band and use arrays of superconducting transition-edge sensors (TES), reflector optics, and opto-mechanical scanners. Whereas the basic principle of these devices remains unchanged, there has been a continuous development of the technical details, as the detector array, the scanning scheme, and the readout, as well as system integration and performance. The latest prototype of this camera development features a linear array of 128 detectors and a linear scanner capable of 25Hz frame rate. Using different types of reflector optics, a field of view of 1×2m2 and a spatial resolution of 1-2 cm is provided at object distances of about 5-25m. We present the concept of this camera and give details on system design and performance. Demonstration videos show its capability for hidden threat detection and illustrate possible application scenarios.

Two-Stage Classification Approach for Human Detection in Camera Video in Bulk Ports

Directory of Open Access Journals (Sweden)

Mi Chao

2015-09-01

Full Text Available With the development of automation in ports, the video surveillance systems with automated human detection begun to be applied in open-air handling operation areas for safety and security. The accuracy of traditional human detection based on the video camera is not high enough to meet the requirements of operation surveillance. One of the key reasons is that Histograms of Oriented Gradients (HOG features of the human body will show great different between front & back standing (F&B and side standing (Side human body. Therefore, the final training for classifier will only gain a few useful specific features which have contribution to classification and are insufficient to support effective classification, while using the HOG features directly extracted by the samples from different human postures. This paper proposes a two-stage classification method to improve the accuracy of human detection. In the first stage, during preprocessing classification, images is mainly divided into possible F&B human body and not F&B human body, and then they were put into the second-stage classification among side human and non-human recognition. The experimental results in Tianjin port show that the two-stage classifier can improve the classification accuracy of human detection obviously.

Heterogeneous CPU-GPU moving targets detection for UAV video

Science.gov (United States)

Li, Maowen; Tang, Linbo; Han, Yuqi; Yu, Chunlei; Zhang, Chao; Fu, Huiquan

2017-07-01

Moving targets detection is gaining popularity in civilian and military applications. On some monitoring platform of motion detection, some low-resolution stationary cameras are replaced by moving HD camera based on UAVs. The pixels of moving targets in the HD Video taken by UAV are always in a minority, and the background of the frame is usually moving because of the motion of UAVs. The high computational cost of the algorithm prevents running it at higher resolutions the pixels of frame. Hence, to solve the problem of moving targets detection based UAVs video, we propose a heterogeneous CPU-GPU moving target detection algorithm for UAV video. More specifically, we use background registration to eliminate the impact of the moving background and frame difference to detect small moving targets. In order to achieve the effect of real-time processing, we design the solution of heterogeneous CPU-GPU framework for our method. The experimental results show that our method can detect the main moving targets from the HD video taken by UAV, and the average process time is 52.16ms per frame which is fast enough to solve the problem.

Frequency identification of vibration signals using video camera image data.

Science.gov (United States)

Jeng, Yih-Nen; Wu, Chia-Hung

2012-10-16

This study showed that an image data acquisition system connecting a high-speed camera or webcam to a notebook or personal computer (PC) can precisely capture most dominant modes of vibration signal, but may involve the non-physical modes induced by the insufficient frame rates. Using a simple model, frequencies of these modes are properly predicted and excluded. Two experimental designs, which involve using an LED light source and a vibration exciter, are proposed to demonstrate the performance. First, the original gray-level resolution of a video camera from, for instance, 0 to 256 levels, was enhanced by summing gray-level data of all pixels in a small region around the point of interest. The image signal was further enhanced by attaching a white paper sheet marked with a black line on the surface of the vibration system in operation to increase the gray-level resolution. Experimental results showed that the Prosilica CV640C CMOS high-speed camera has the critical frequency of inducing the false mode at 60 Hz, whereas that of the webcam is 7.8 Hz. Several factors were proven to have the effect of partially suppressing the non-physical modes, but they cannot eliminate them completely. Two examples, the prominent vibration modes of which are less than the associated critical frequencies, are examined to demonstrate the performances of the proposed systems. In general, the experimental data show that the non-contact type image data acquisition systems are potential tools for collecting the low-frequency vibration signal of a system.

Frequency Identification of Vibration Signals Using Video Camera Image Data

Directory of Open Access Journals (Sweden)

Chia-Hung Wu

2012-10-01

Full Text Available This study showed that an image data acquisition system connecting a high-speed camera or webcam to a notebook or personal computer (PC can precisely capture most dominant modes of vibration signal, but may involve the non-physical modes induced by the insufficient frame rates. Using a simple model, frequencies of these modes are properly predicted and excluded. Two experimental designs, which involve using an LED light source and a vibration exciter, are proposed to demonstrate the performance. First, the original gray-level resolution of a video camera from, for instance, 0 to 256 levels, was enhanced by summing gray-level data of all pixels in a small region around the point of interest. The image signal was further enhanced by attaching a white paper sheet marked with a black line on the surface of the vibration system in operation to increase the gray-level resolution. Experimental results showed that the Prosilica CV640C CMOS high-speed camera has the critical frequency of inducing the false mode at 60 Hz, whereas that of the webcam is 7.8 Hz. Several factors were proven to have the effect of partially suppressing the non-physical modes, but they cannot eliminate them completely. Two examples, the prominent vibration modes of which are less than the associated critical frequencies, are examined to demonstrate the performances of the proposed systems. In general, the experimental data show that the non-contact type image data acquisition systems are potential tools for collecting the low-frequency vibration signal of a system.

Retail video analytics: an overview and survey

Science.gov (United States)

Connell, Jonathan; Fan, Quanfu; Gabbur, Prasad; Haas, Norman; Pankanti, Sharath; Trinh, Hoang

2013-03-01

Today retail video analytics has gone beyond the traditional domain of security and loss prevention by providing retailers insightful business intelligence such as store traffic statistics and queue data. Such information allows for enhanced customer experience, optimized store performance, reduced operational costs, and ultimately higher profitability. This paper gives an overview of various camera-based applications in retail as well as the state-ofthe- art computer vision techniques behind them. It also presents some of the promising technical directions for exploration in retail video analytics.

"Comuniquemonos, Ya]": strengthening interpersonal communication and health through video.

Science.gov (United States)

1992-01-01

The Nutrition Communication Project has overseen production of a training video interpersonal communication for health workers involved in growth monitoring and promotion (GMP) programs in Latin America entitled Comuniquemonos, Ya] Producers used the following questions as their guidelines: Who is the audience?, Why is the training needed?, and What are the objectives and advantages of using video? Communication specialists, anthropologists, educators, and nutritionists worked together to write the script. Then video camera specialists taped the video in Bolivia and Guatemala. A facilitator's guide complete with an outline of an entire workshop comes with the video. The guide encourages trainees to participate in various situations. Trainees are able to compare their interpersonal skills with those of the health workers on the video. Further they can determine cause and effect. The video has 2 scenes to demonstrate poor and good communication skills using the same health worker in both situations. Other scenes highlight 6 communication skills: developing a warm environment, asking questions, sharing results, listening, observing, and doing demonstration. All types of health workers ranging from physicians to community health workers as well as health workers from various countries (Guatemala, Honduras, Bolivia, and Ecuador) approve of the video. Some trainers have used the video without using the guide and comment that it began a debate on communication 's role in GMP efforts.

Shuttlecock detection system for fully-autonomous badminton robot with two high-speed video cameras

Science.gov (United States)

Masunari, T.; Yamagami, K.; Mizuno, M.; Une, S.; Uotani, M.; Kanematsu, T.; Demachi, K.; Sano, S.; Nakamura, Y.; Suzuki, S.

2017-02-01

Two high-speed video cameras are successfully used to detect the motion of a flying shuttlecock of badminton. The shuttlecock detection system is applied to badminton robots that play badminton fully autonomously. The detection system measures the three dimensional position and velocity of a flying shuttlecock, and predicts the position where the shuttlecock falls to the ground. The badminton robot moves quickly to the position where the shuttle-cock falls to, and hits the shuttlecock back into the opponent's side of the court. In the game of badminton, there is a large audience, and some of them move behind a flying shuttlecock, which are a kind of background noise and makes it difficult to detect the motion of the shuttlecock. The present study demonstrates that such noises can be eliminated by the method of stereo imaging with two high-speed cameras.

Dashboard Videos

Science.gov (United States)

Gleue, Alan D.; Depcik, Chris; Peltier, Ted

2012-01-01

Last school year, I had a web link emailed to me entitled "A Dashboard Physics Lesson." The link, created and posted by Dale Basier on his "Lab Out Loud" blog, illustrates video of a car's speedometer synchronized with video of the road. These two separate video streams are compiled into one video that students can watch and analyze. After seeing…

Efficient Use of Video for 3d Modelling of Cultural Heritage Objects

Science.gov (United States)

Alsadik, B.; Gerke, M.; Vosselman, G.

2015-03-01

Currently, there is a rapid development in the techniques of the automated image based modelling (IBM), especially in advanced structure-from-motion (SFM) and dense image matching methods, and camera technology. One possibility is to use video imaging to create 3D reality based models of cultural heritage architectures and monuments. Practically, video imaging is much easier to apply when compared to still image shooting in IBM techniques because the latter needs a thorough planning and proficiency. However, one is faced with mainly three problems when video image sequences are used for highly detailed modelling and dimensional survey of cultural heritage objects. These problems are: the low resolution of video images, the need to process a large number of short baseline video images and blur effects due to camera shake on a significant number of images. In this research, the feasibility of using video images for efficient 3D modelling is investigated. A method is developed to find the minimal significant number of video images in terms of object coverage and blur effect. This reduction in video images is convenient to decrease the processing time and to create a reliable textured 3D model compared with models produced by still imaging. Two experiments for modelling a building and a monument are tested using a video image resolution of 1920×1080 pixels. Internal and external validations of the produced models are applied to find out the final predicted accuracy and the model level of details. Related to the object complexity and video imaging resolution, the tests show an achievable average accuracy between 1 - 5 cm when using video imaging, which is suitable for visualization, virtual museums and low detailed documentation.

EFFICIENT USE OF VIDEO FOR 3D MODELLING OF CULTURAL HERITAGE OBJECTS

Directory of Open Access Journals (Sweden)

B. Alsadik

2015-03-01

Full Text Available Currently, there is a rapid development in the techniques of the automated image based modelling (IBM, especially in advanced structure-from-motion (SFM and dense image matching methods, and camera technology. One possibility is to use video imaging to create 3D reality based models of cultural heritage architectures and monuments. Practically, video imaging is much easier to apply when compared to still image shooting in IBM techniques because the latter needs a thorough planning and proficiency. However, one is faced with mainly three problems when video image sequences are used for highly detailed modelling and dimensional survey of cultural heritage objects. These problems are: the low resolution of video images, the need to process a large number of short baseline video images and blur effects due to camera shake on a significant number of images. In this research, the feasibility of using video images for efficient 3D modelling is investigated. A method is developed to find the minimal significant number of video images in terms of object coverage and blur effect. This reduction in video images is convenient to decrease the processing time and to create a reliable textured 3D model compared with models produced by still imaging. Two experiments for modelling a building and a monument are tested using a video image resolution of 1920×1080 pixels. Internal and external validations of the produced models are applied to find out the final predicted accuracy and the model level of details. Related to the object complexity and video imaging resolution, the tests show an achievable average accuracy between 1 – 5 cm when using video imaging, which is suitable for visualization, virtual museums and low detailed documentation.

Automatic inference of geometric camera parameters and inter-camera topology in uncalibrated disjoint surveillance cameras

Science.gov (United States)

den Hollander, Richard J. M.; Bouma, Henri; Baan, Jan; Eendebak, Pieter T.; van Rest, Jeroen H. C.

2015-10-01

Person tracking across non-overlapping cameras and other types of video analytics benefit from spatial calibration information that allows an estimation of the distance between cameras and a relation between pixel coordinates and world coordinates within a camera. In a large environment with many cameras, or for frequent ad-hoc deployments of cameras, the cost of this calibration is high. This creates a barrier for the use of video analytics. Automating the calibration allows for a short configuration time, and the use of video analytics in a wider range of scenarios, including ad-hoc crisis situations and large scale surveillance systems. We show an autocalibration method entirely based on pedestrian detections in surveillance video in multiple non-overlapping cameras. In this paper, we show the two main components of automatic calibration. The first shows the intra-camera geometry estimation that leads to an estimate of the tilt angle, focal length and camera height, which is important for the conversion from pixels to meters and vice versa. The second component shows the inter-camera topology inference that leads to an estimate of the distance between cameras, which is important for spatio-temporal analysis of multi-camera tracking. This paper describes each of these methods and provides results on realistic video data.

The design of red-blue 3D video fusion system based on DM642

Science.gov (United States)

Fu, Rongguo; Luo, Hao; Lv, Jin; Feng, Shu; Wei, Yifang; Zhang, Hao

2016-10-01

Aiming at the uncertainty of traditional 3D video capturing including camera focal lengths, distance and angle parameters between two cameras, a red-blue 3D video fusion system based on DM642 hardware processing platform is designed with the parallel optical axis. In view of the brightness reduction of traditional 3D video, the brightness enhancement algorithm based on human visual characteristics is proposed and the luminance component processing method based on YCbCr color space is also proposed. The BIOS real-time operating system is used to improve the real-time performance. The video processing circuit with the core of DM642 enhances the brightness of the images, then converts the video signals of YCbCr to RGB and extracts the R component from one camera, so does the other video and G, B component are extracted synchronously, outputs 3D fusion images finally. The real-time adjustments such as translation and scaling of the two color components are realized through the serial communication between the VC software and BIOS. The system with the method of adding red-blue components reduces the lost of the chrominance components and makes the picture color saturation reduce to more than 95% of the original. Enhancement algorithm after optimization to reduce the amount of data fusion in the processing of video is used to reduce the fusion time and watching effect is improved. Experimental results show that the system can capture images in near distance, output red-blue 3D video and presents the nice experiences to the audience wearing red-blue glasses.

A highly sensitive underwater video system for use in turbid aquaculture ponds.

Science.gov (United States)

Hung, Chin-Chang; Tsao, Shih-Chieh; Huang, Kuo-Hao; Jang, Jia-Pu; Chang, Hsu-Kuang; Dobbs, Fred C

2016-08-24

The turbid, low-light waters characteristic of aquaculture ponds have made it difficult or impossible for previous video cameras to provide clear imagery of the ponds' benthic habitat. We developed a highly sensitive, underwater video system (UVS) for this particular application and tested it in shrimp ponds having turbidities typical of those in southern Taiwan. The system's high-quality video stream and images, together with its camera capacity (up to nine cameras), permit in situ observations of shrimp feeding behavior, shrimp size and internal anatomy, and organic matter residues on pond sediments. The UVS can operate continuously and be focused remotely, a convenience to shrimp farmers. The observations possible with the UVS provide aquaculturists with information critical to provision of feed with minimal waste; determining whether the accumulation of organic-matter residues dictates exchange of pond water; and management decisions concerning shrimp health.

Video game addiction, ADHD symptomatology, and video game reinforcement.

Science.gov (United States)

Mathews, Christine L; Morrell, Holly E R; Molle, Jon E

2018-06-06

Up to 23% of people who play video games report symptoms of addiction. Individuals with attention deficit hyperactivity disorder (ADHD) may be at increased risk for video game addiction, especially when playing games with more reinforcing properties. The current study tested whether level of video game reinforcement (type of game) places individuals with greater ADHD symptom severity at higher risk for developing video game addiction. Adult video game players (N = 2,801; Mean age = 22.43, SD = 4.70; 93.30% male; 82.80% Caucasian) completed an online survey. Hierarchical multiple linear regression analyses were used to test type of game, ADHD symptom severity, and the interaction between type of game and ADHD symptomatology as predictors of video game addiction severity, after controlling for age, gender, and weekly time spent playing video games. ADHD symptom severity was positively associated with increased addiction severity (b = .73 and .68, ps .05. The relationship between ADHD symptom severity and addiction severity did not depend on the type of video game played or preferred most, ps > .05. Gamers who have greater ADHD symptom severity may be at greater risk for developing symptoms of video game addiction and its negative consequences, regardless of type of video game played or preferred most. Individuals who report ADHD symptomatology and also identify as gamers may benefit from psychoeducation about the potential risk for problematic play.

vid113_0401r -- Video groundtruthing collected from RV Tatoosh during August 2005.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

Human recognition at a distance in video

CERN Document Server

Bhanu, Bir

2010-01-01

Most biometric systems employed for human recognition require physical contact with, or close proximity to, a cooperative subject. Far more challenging is the ability to reliably recognize individuals at a distance, when viewed from an arbitrary angle under real-world environmental conditions. Gait and face data are the two biometrics that can be most easily captured from a distance using a video camera. This comprehensive and logically organized text/reference addresses the fundamental problems associated with gait and face-based human recognition, from color and infrared video data that are

Enhancement system of nighttime infrared video image and visible video image

Science.gov (United States)

Wang, Yue; Piao, Yan

2016-11-01

Visibility of Nighttime video image has a great significance for military and medicine areas, but nighttime video image has so poor quality that we can't recognize the target and background. Thus we enhance the nighttime video image by fuse infrared video image and visible video image. According to the characteristics of infrared and visible images, we proposed improved sift algorithm andαβ weighted algorithm to fuse heterologous nighttime images. We would deduced a transfer matrix from improved sift algorithm. The transfer matrix would rapid register heterologous nighttime images. And theαβ weighted algorithm can be applied in any scene. In the video image fusion system, we used the transfer matrix to register every frame and then used αβ weighted method to fuse every frame, which reached the time requirement soft video. The fused video image not only retains the clear target information of infrared video image, but also retains the detail and color information of visible video image and the fused video image can fluency play.

Secure and Efficient Reactive Video Surveillance for Patient Monitoring

Directory of Open Access Journals (Sweden)

An Braeken

2016-01-01

Full Text Available Video surveillance is widely deployed for many kinds of monitoring applications in healthcare and assisted living systems. Security and privacy are two promising factors that align the quality and validity of video surveillance systems with the caliber of patient monitoring applications. In this paper, we propose a symmetric key-based security framework for the reactive video surveillance of patients based on the inputs coming from data measured by a wireless body area network attached to the human body. Only authenticated patients are able to activate the video cameras, whereas the patient and authorized people can consult the video data. User and location privacy are at each moment guaranteed for the patient. A tradeoff between security and quality of service is defined in order to ensure that the surveillance system gets activated even in emergency situations. In addition, the solution includes resistance against tampering with the device on the patient’s side.

SnapVideo: Personalized Video Generation for a Sightseeing Trip.

Science.gov (United States)

Zhang, Luming; Jing, Peiguang; Su, Yuting; Zhang, Chao; Shaoz, Ling

2017-11-01

Leisure tourism is an indispensable activity in urban people's life. Due to the popularity of intelligent mobile devices, a large number of photos and videos are recorded during a trip. Therefore, the ability to vividly and interestingly display these media data is a useful technique. In this paper, we propose SnapVideo, a new method that intelligently converts a personal album describing of a trip into a comprehensive, aesthetically pleasing, and coherent video clip. The proposed framework contains three main components. The scenic spot identification model first personalizes the video clips based on multiple prespecified audience classes. We then search for some auxiliary related videos from YouTube 1 according to the selected photos. To comprehensively describe a scenery, the view generation module clusters the crawled video frames into a number of views. Finally, a probabilistic model is developed to fit the frames from multiple views into an aesthetically pleasing and coherent video clip, which optimally captures the semantics of a sightseeing trip. Extensive user studies demonstrated the competitiveness of our method from an aesthetic point of view. Moreover, quantitative analysis reflects that semantically important spots are well preserved in the final video clip. 1 https://www.youtube.com/.

Identification of Mobile Phone and Analysis of Original Version of Videos through a Delay Time Analysis of Sound Signals from Mobile Phone Videos.

Science.gov (United States)

Hwang, Min Gu; Har, Dong Hwan

2017-11-01

This study designs a method of identifying the camera model used to take videos that are distributed through mobile phones and determines the original version of the mobile phone video for use as legal evidence. For this analysis, an experiment was conducted to find the unique characteristics of each mobile phone. The videos recorded by mobile phones were analyzed to establish the delay time of sound signals, and the differences between the delay times of sound signals for different mobile phones were traced by classifying their characteristics. Furthermore, the sound input signals for mobile phone videos used as legal evidence were analyzed to ascertain whether they have the unique characteristics of the original version. The objective of this study was to find a method for validating the use of mobile phone videos as legal evidence using mobile phones through differences in the delay times of sound input signals. © 2017 American Academy of Forensic Sciences.

Markerless registration for image guided surgery. Preoperative image, intraoperative video image, and patient

International Nuclear Information System (INIS)

Kihara, Tomohiko; Tanaka, Yuko

1998-01-01

Real-time and volumetric acquisition of X-ray CT, MR, and SPECT is the latest trend of the medical imaging devices. A clinical challenge is to use these multi-modality volumetric information complementary on patient in the entire diagnostic and surgical processes. The intraoperative image and patient integration intents to establish a common reference frame by image in diagnostic and surgical processes. This provides a quantitative measure during surgery, for which we have been relied mostly on doctors' skills and experiences. The intraoperative image and patient integration involves various technologies, however, we think one of the most important elements is the development of markerless registration, which should be efficient and applicable to the preoperative multi-modality data sets, intraoperative image, and patient. We developed a registration system which integrates preoperative multi-modality images, intraoperative video image, and patient. It consists of a real-time registration of video camera for intraoperative use, a markerless surface sampling matching of patient and image, our previous works of markerless multi-modality image registration of X-ray CT, MR, and SPECT, and an image synthesis on video image. We think these techniques can be used in many applications which involve video camera like devices such as video camera, microscope, and image Intensifier. (author)

HDR video synthesis for vision systems in dynamic scenes

Science.gov (United States)

Shopovska, Ivana; Jovanov, Ljubomir; Goossens, Bart; Philips, Wilfried

2016-09-01

High dynamic range (HDR) image generation from a number of differently exposed low dynamic range (LDR) images has been extensively explored in the past few decades, and as a result of these efforts a large number of HDR synthesis methods have been proposed. Since HDR images are synthesized by combining well-exposed regions of the input images, one of the main challenges is dealing with camera or object motion. In this paper we propose a method for the synthesis of HDR video from a single camera using multiple, differently exposed video frames, with circularly alternating exposure times. One of the potential applications of the system is in driver assistance systems and autonomous vehicles, involving significant camera and object movement, non- uniform and temporally varying illumination, and the requirement of real-time performance. To achieve these goals simultaneously, we propose a HDR synthesis approach based on weighted averaging of aligned radiance maps. The computational complexity of high-quality optical flow methods for motion compensation is still pro- hibitively high for real-time applications. Instead, we rely on more efficient global projective transformations to solve camera movement, while moving objects are detected by thresholding the differences between the trans- formed and brightness adapted images in the set. To attain temporal consistency of the camera motion in the consecutive HDR frames, the parameters of the perspective transformation are stabilized over time by means of computationally efficient temporal filtering. We evaluated our results on several reference HDR videos, on synthetic scenes, and using 14-bit raw images taken with a standard camera.

Augmented video viewing: transforming video consumption into an active experience

OpenAIRE

WIJNANTS, Maarten; Leën, Jeroen; QUAX, Peter; LAMOTTE, Wim

2014-01-01

Traditional video productions fail to cater to the interactivity standards that the current generation of digitally native customers have become accustomed to. This paper therefore advertises the \\activation" of the video consumption process. In particular, it proposes to enhance HTML5 video playback with interactive features in order to transform video viewing into a dynamic pastime. The objective is to enable the authoring of more captivating and rewarding video experiences for end-users. T...

Logistical and safeguards aspects related to the introduction and implementation of video surveillance equipment by EURATOM

International Nuclear Information System (INIS)

Chare, P.J.; Wagner, H.G.; Otto, P.; Schenkel, R.

1987-01-01

With the growing availability of reliable video equipment for surveillance applications in safeguards and the disappearance of the Super 8 mm cameras, there will be a period of transition from film camera to video surveillance, a process which started two years ago. This gradual transition, as the film cameras come to the end of their useful lives, will afford the safeguards authorities the opportunity to examine in detail the logistical and procedural changes necessary. This paper examines, on the basis of existing video equipment in use or under development, the differences and problems to be encountered in the approach to surveillance. These problems include tamper resistance of signal transmission, on site and headquarters review, preventative maintenance, reliability, repair, and overall performance evaluation. In addition the advantages and flexibility offered by the introduction of video, such as on site review and increased memory capacity, are also discussed. The paper also considers the overall costs and manpower required by EURATOM for the implementation of the video systems as compared to the existing twin Minolta film camera system to ensure the most efficient use of manpower and equipment

Features for detecting smoke in laparoscopic videos

Directory of Open Access Journals (Sweden)

Jalal Nour Aldeen

2017-09-01

Full Text Available Video-based smoke detection in laparoscopic surgery has different potential applications, such as the automatic addressing of surgical events associated with the electrocauterization task and the development of automatic smoke removal. In the literature, video-based smoke detection has been studied widely for fire surveillance systems. Nevertheless, the proposed methods are insufficient for smoke detection in laparoscopic videos because they often depend on assumptions which rarely hold in laparoscopic surgery such as static camera. In this paper, ten visual features based on motion, texture and colour of smoke are proposed and evaluated for smoke detection in laparoscopic videos. These features are RGB channels, energy-based feature, texture features based on gray level co-occurrence matrix (GLCM, HSV colour space feature, features based on the detection of moving regions using optical flow and the smoke colour in HSV colour space. These features were tested on four laparoscopic cholecystectomy videos. Experimental observations show that each feature can provide valuable information in performing the smoke detection task. However, each feature has weaknesses to detect the presence of smoke in some cases. By combining all proposed features smoke with high and even low density can be identified robustly and the classification accuracy increases significantly.

A Standard-Compliant Virtual Meeting System with Active Video Object Tracking

Directory of Open Access Journals (Sweden)

Chang Yao-Jen

2002-01-01

Full Text Available This paper presents an H.323 standard compliant virtual video conferencing system. The proposed system not only serves as a multipoint control unit (MCU for multipoint connection but also provides a gateway function between the H.323 LAN (local-area network and the H.324 WAN (wide-area network users. The proposed virtual video conferencing system provides user-friendly object compositing and manipulation features including 2D video object scaling, repositioning, rotation, and dynamic bit-allocation in a 3D virtual environment. A reliable, and accurate scheme based on background image mosaics is proposed for real-time extracting and tracking foreground video objects from the video captured with an active camera. Chroma-key insertion is used to facilitate video objects extraction and manipulation. We have implemented a prototype of the virtual conference system with an integrated graphical user interface to demonstrate the feasibility of the proposed methods.

A Standard-Compliant Virtual Meeting System with Active Video Object Tracking

Science.gov (United States)

Lin, Chia-Wen; Chang, Yao-Jen; Wang, Chih-Ming; Chen, Yung-Chang; Sun, Ming-Ting

2002-12-01

This paper presents an H.323 standard compliant virtual video conferencing system. The proposed system not only serves as a multipoint control unit (MCU) for multipoint connection but also provides a gateway function between the H.323 LAN (local-area network) and the H.324 WAN (wide-area network) users. The proposed virtual video conferencing system provides user-friendly object compositing and manipulation features including 2D video object scaling, repositioning, rotation, and dynamic bit-allocation in a 3D virtual environment. A reliable, and accurate scheme based on background image mosaics is proposed for real-time extracting and tracking foreground video objects from the video captured with an active camera. Chroma-key insertion is used to facilitate video objects extraction and manipulation. We have implemented a prototype of the virtual conference system with an integrated graphical user interface to demonstrate the feasibility of the proposed methods.

Multi-Task Video Captioning with Video and Entailment Generation

OpenAIRE

Pasunuru, Ramakanth; Bansal, Mohit

2017-01-01

Video captioning, the task of describing the content of a video, has seen some promising improvements in recent years with sequence-to-sequence models, but accurately learning the temporal and logical dynamics involved in the task still remains a challenge, especially given the lack of sufficient annotated data. We improve video captioning by sharing knowledge with two related directed-generation tasks: a temporally-directed unsupervised video prediction task to learn richer context-aware vid...

Video Quality Prediction Models Based on Video Content Dynamics for H.264 Video over UMTS Networks

Directory of Open Access Journals (Sweden)

Asiya Khan

2010-01-01

Full Text Available The aim of this paper is to present video quality prediction models for objective non-intrusive, prediction of H.264 encoded video for all content types combining parameters both in the physical and application layer over Universal Mobile Telecommunication Systems (UMTS networks. In order to characterize the Quality of Service (QoS level, a learning model based on Adaptive Neural Fuzzy Inference System (ANFIS and a second model based on non-linear regression analysis is proposed to predict the video quality in terms of the Mean Opinion Score (MOS. The objective of the paper is two-fold. First, to find the impact of QoS parameters on end-to-end video quality for H.264 encoded video. Second, to develop learning models based on ANFIS and non-linear regression analysis to predict video quality over UMTS networks by considering the impact of radio link loss models. The loss models considered are 2-state Markov models. Both the models are trained with a combination of physical and application layer parameters and validated with unseen dataset. Preliminary results show that good prediction accuracy was obtained from both the models. The work should help in the development of a reference-free video prediction model and QoS control methods for video over UMTS networks.

Streaming Video--The Wave of the Video Future!

Science.gov (United States)

Brown, Laura

2004-01-01

Videos and DVDs give the teachers more flexibility than slide projectors, filmstrips, and 16mm films but teachers and students are excited about a new technology called streaming. Streaming allows the educators to view videos on demand via the Internet, which works through the transfer of digital media like video, and voice data that is received…

Joint Rendering and Segmentation of Free-Viewpoint Video

Directory of Open Access Journals (Sweden)

Ishii Masato

2010-01-01

Full Text Available Abstract This paper presents a method that jointly performs synthesis and object segmentation of free-viewpoint video using multiview video as the input. This method is designed to achieve robust segmentation from online video input without per-frame user interaction and precomputations. This method shares a calculation process between the synthesis and segmentation steps; the matching costs calculated through the synthesis step are adaptively fused with other cues depending on the reliability in the segmentation step. Since the segmentation is performed for arbitrary viewpoints directly, the extracted object can be superimposed onto another 3D scene with geometric consistency. We can observe that the object and new background move naturally along with the viewpoint change as if they existed together in the same space. In the experiments, our method can process online video input captured by a 25-camera array and show the result image at 4.55 fps.

Video-based measurements for wireless capsule endoscope tracking

International Nuclear Information System (INIS)

Spyrou, Evaggelos; Iakovidis, Dimitris K

2014-01-01

The wireless capsule endoscope is a swallowable medical device equipped with a miniature camera enabling the visual examination of the gastrointestinal (GI) tract. It wirelessly transmits thousands of images to an external video recording system, while its location and orientation are being tracked approximately by external sensor arrays. In this paper we investigate a video-based approach to tracking the capsule endoscope without requiring any external equipment. The proposed method involves extraction of speeded up robust features from video frames, registration of consecutive frames based on the random sample consensus algorithm, and estimation of the displacement and rotation of interest points within these frames. The results obtained by the application of this method on wireless capsule endoscopy videos indicate its effectiveness and improved performance over the state of the art. The findings of this research pave the way for a cost-effective localization and travel distance measurement of capsule endoscopes in the GI tract, which could contribute in the planning of more accurate surgical interventions. (paper)

Video-based measurements for wireless capsule endoscope tracking

Science.gov (United States)

Spyrou, Evaggelos; Iakovidis, Dimitris K.

2014-01-01

The wireless capsule endoscope is a swallowable medical device equipped with a miniature camera enabling the visual examination of the gastrointestinal (GI) tract. It wirelessly transmits thousands of images to an external video recording system, while its location and orientation are being tracked approximately by external sensor arrays. In this paper we investigate a video-based approach to tracking the capsule endoscope without requiring any external equipment. The proposed method involves extraction of speeded up robust features from video frames, registration of consecutive frames based on the random sample consensus algorithm, and estimation of the displacement and rotation of interest points within these frames. The results obtained by the application of this method on wireless capsule endoscopy videos indicate its effectiveness and improved performance over the state of the art. The findings of this research pave the way for a cost-effective localization and travel distance measurement of capsule endoscopes in the GI tract, which could contribute in the planning of more accurate surgical interventions.

First- and third-party ground truth for key frame extraction from consumer video clips

Science.gov (United States)

Costello, Kathleen; Luo, Jiebo

2007-02-01

Extracting key frames (KF) from video is of great interest in many applications, such as video summary, video organization, video compression, and prints from video. KF extraction is not a new problem. However, current literature has been focused mainly on sports or news video. In the consumer video space, the biggest challenges for key frame selection from consumer videos are the unconstrained content and lack of any preimposed structure. In this study, we conduct ground truth collection of key frames from video clips taken by digital cameras (as opposed to camcorders) using both first- and third-party judges. The goals of this study are: (1) to create a reference database of video clips reasonably representative of the consumer video space; (2) to identify associated key frames by which automated algorithms can be compared and judged for effectiveness; and (3) to uncover the criteria used by both first- and thirdparty human judges so these criteria can influence algorithm design. The findings from these ground truths will be discussed.

Progress in video immersion using Panospheric imaging

Science.gov (United States)

Bogner, Stephen L.; Southwell, David T.; Penzes, Steven G.; Brosinsky, Chris A.; Anderson, Ron; Hanna, Doug M.

1998-09-01

Having demonstrated significant technical and marketplace advantages over other modalities for video immersion, PanosphericTM Imaging (PI) continues to evolve rapidly. This paper reports on progress achieved since AeroSense 97. The first practical field deployment of the technology occurred in June-August 1997 during the NASA-CMU 'Atacama Desert Trek' activity, where the Nomad mobile robot was teleoperated via immersive PanosphericTM imagery from a distance of several thousand kilometers. Research using teleoperated vehicles at DRES has also verified the exceptional utility of the PI technology for achieving high levels of situational awareness, operator confidence, and mission effectiveness. Important performance enhancements have been achieved with the completion of the 4th Generation PI DSP-based array processor system. The system is now able to provide dynamic full video-rate generation of spatial and computational transformations, resulting in a programmable and fully interactive immersive video telepresence. A new multi- CCD camera architecture has been created to exploit the bandwidth of this processor, yielding a well-matched PI system with greatly improved resolution. While the initial commercial application for this technology is expected to be video tele- conferencing, it also appears to have excellent potential for application in the 'Immersive Cockpit' concept. Additional progress is reported in the areas of Long Wave Infrared PI Imaging, Stereo PI concepts, PI based Video-Servoing concepts, PI based Video Navigation concepts, and Foveation concepts (to merge localized high-resolution views with immersive views).

The LivePhoto Physics videos and video analysis site

Science.gov (United States)

Abbott, David

2009-09-01

The LivePhoto site is similar to an archive of short films for video analysis. Some videos have Flash tools for analyzing the video embedded in the movie. Most of the videos address mechanics topics with titles like Rolling Pencil (check this one out for pedagogy and content knowledge—nicely done!), Juggler, Yo-yo, Puck and Bar (this one is an inelastic collision with rotation), but there are a few titles in other areas (E&M, waves, thermo, etc.).

Consumer-based technology for distribution of surgical videos for objective evaluation.

Science.gov (United States)

Gonzalez, Ray; Martinez, Jose M; Lo Menzo, Emanuele; Iglesias, Alberto R; Ro, Charles Y; Madan, Atul K

2012-08-01

The Global Operative Assessment of Laparoscopic Skill (GOALS) is one validated metric utilized to grade laparoscopic skills and has been utilized to score recorded operative videos. To facilitate easier viewing of these recorded videos, we are developing novel techniques to enable surgeons to view these videos. The objective of this study is to determine the feasibility of utilizing widespread current consumer-based technology to assist in distributing appropriate videos for objective evaluation. Videos from residents were recorded via a direct connection from the camera processor via an S-video output via a cable into a hub to connect to a standard laptop computer via a universal serial bus (USB) port. A standard consumer-based video editing program was utilized to capture the video and record in appropriate format. We utilized mp4 format, and depending on the size of the file, the videos were scaled down (compressed), their format changed (using a standard video editing program), or sliced into multiple videos. Standard available consumer-based programs were utilized to convert the video into a more appropriate format for handheld personal digital assistants. In addition, the videos were uploaded to a social networking website and video sharing websites. Recorded cases of laparoscopic cholecystectomy in a porcine model were utilized. Compression was required for all formats. All formats were accessed from home computers, work computers, and iPhones without difficulty. Qualitative analyses by four surgeons demonstrated appropriate quality to grade for these formats. Our preliminary results show promise that, utilizing consumer-based technology, videos can be easily distributed to surgeons to grade via GOALS via various methods. Easy accessibility may help make evaluation of resident videos less complicated and cumbersome.

Ranking Highlights in Personal Videos by Analyzing Edited Videos.

Science.gov (United States)

Sun, Min; Farhadi, Ali; Chen, Tseng-Hung; Seitz, Steve

2016-11-01

We present a fully automatic system for ranking domain-specific highlights in unconstrained personal videos by analyzing online edited videos. A novel latent linear ranking model is proposed to handle noisy training data harvested online. Specifically, given a targeted domain such as "surfing," our system mines the YouTube database to find pairs of raw and their corresponding edited videos. Leveraging the assumption that an edited video is more likely to contain highlights than the trimmed parts of the raw video, we obtain pair-wise ranking constraints to train our model. The learning task is challenging due to the amount of noise and variation in the mined data. Hence, a latent loss function is incorporated to mitigate the issues caused by the noise. We efficiently learn the latent model on a large number of videos (about 870 min in total) using a novel EM-like procedure. Our latent ranking model outperforms its classification counterpart and is fairly competitive compared with a fully supervised ranking system that requires labels from Amazon Mechanical Turk. We further show that a state-of-the-art audio feature mel-frequency cepstral coefficients is inferior to a state-of-the-art visual feature. By combining both audio-visual features, we obtain the best performance in dog activity, surfing, skating, and viral video domains. Finally, we show that impressive highlights can be detected without additional human supervision for seven domains (i.e., skating, surfing, skiing, gymnastics, parkour, dog activity, and viral video) in unconstrained personal videos.

Video processing for human perceptual visual quality-oriented video coding.

Science.gov (United States)

Oh, Hyungsuk; Kim, Wonha

2013-04-01

We have developed a video processing method that achieves human perceptual visual quality-oriented video coding. The patterns of moving objects are modeled by considering the limited human capacity for spatial-temporal resolution and the visual sensory memory together, and an online moving pattern classifier is devised by using the Hedge algorithm. The moving pattern classifier is embedded in the existing visual saliency with the purpose of providing a human perceptual video quality saliency model. In order to apply the developed saliency model to video coding, the conventional foveation filtering method is extended. The proposed foveation filter can smooth and enhance the video signals locally, in conformance with the developed saliency model, without causing any artifacts. The performance evaluation results confirm that the proposed video processing method shows reliable improvements in the perceptual quality for various sequences and at various bandwidths, compared to existing saliency-based video coding methods.

The benefits of being a video gamer in laparoscopic surgery.

Science.gov (United States)

Sammut, Matthew; Sammut, Mark; Andrejevic, Predrag

2017-09-01

Video games are mainly considered to be of entertainment value in our society. Laparoscopic surgery and video games are activities similarly requiring eye-hand and visual-spatial skills. Previous studies have not conclusively shown a positive correlation between video game experience and improved ability to accomplish visual-spatial tasks in laparoscopic surgery. This study was an attempt to investigate this relationship. The aim of the study was to investigate whether previous video gaming experience affects the baseline performance on a laparoscopic simulator trainer. Newly qualified medical officers with minimal experience in laparoscopic surgery were invited to participate in the study and assigned to the following groups: gamers (n = 20) and non-gamers (n = 20). Analysis included participants' demographic data and baseline video gaming experience. Laparoscopic skills were assessed using a laparoscopic simulator trainer. There were no significant demographic differences between the two groups. Each participant performed three laparoscopic tasks and mean scores between the two groups were compared. The gamer group had statistically significant better results in maintaining the laparoscopic camera horizon ± 15° (p value = 0.009), in the complex ball manipulation accuracy rates (p value = 0.024) and completed the complex laparoscopic simulator task in a significantly shorter time period (p value = 0.001). Although prior video gaming experience correlated with better results, there were no significant differences for camera accuracy rates (p value = 0.074) and in a two-handed laparoscopic exercise task accuracy rates (p value = 0.092). The results show that previous video-gaming experience improved the baseline performance in laparoscopic simulator skills. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

No Reference Video-Quality-Assessment Model for Monitoring Video Quality of IPTV Services

Science.gov (United States)

Yamagishi, Kazuhisa; Okamoto, Jun; Hayashi, Takanori; Takahashi, Akira

Service providers should monitor the quality of experience of a communication service in real time to confirm its status. To do this, we previously proposed a packet-layer model that can be used for monitoring the average video quality of typical Internet protocol television content using parameters derived from transmitted packet headers. However, it is difficult to monitor the video quality per user using the average video quality because video quality depends on the video content. To accurately monitor the video quality per user, a model that can be used for estimating the video quality per video content rather than the average video quality should be developed. Therefore, to take into account the impact of video content on video quality, we propose a model that calculates the difference in video quality between the video quality of the estimation-target video and the average video quality estimated using a packet-layer model. We first conducted extensive subjective quality assessments for different codecs and video sequences. We then model their characteristics based on parameters related to compression and packet loss. Finally, we verify the performance of the proposed model by applying it to unknown data sets different from the training data sets used for developing the model.

Video games

OpenAIRE

Kolář, Vojtěch

2012-01-01

This thesis is based on a detailed analysis of various topics related to the question of whether video games can be art. In the first place it analyzes the current academic discussion on this subject and confronts different opinions of both supporters and objectors of the idea, that video games can be a full-fledged art form. The second point of this paper is to analyze the properties, that are inherent to video games, in order to find the reason, why cultural elite considers video games as i...

Detecting fire in video stream using statistical analysis

Directory of Open Access Journals (Sweden)

Koplík Karel

2017-01-01

Full Text Available The real time fire detection in video stream is one of the most interesting problems in computer vision. In fact, in most cases it would be nice to have fire detection algorithm implemented in usual industrial cameras and/or to have possibility to replace standard industrial cameras with one implementing the fire detection algorithm. In this paper, we present new algorithm for detecting fire in video. The algorithm is based on tracking suspicious regions in time with statistical analysis of their trajectory. False alarms are minimized by combining multiple detection criteria: pixel brightness, trajectories of suspicious regions for evaluating characteristic fire flickering and persistence of alarm state in sequence of frames. The resulting implementation is fast and therefore can run on wide range of affordable hardware.

Specialized video systems for use in underground storage tanks

International Nuclear Information System (INIS)

Heckendom, F.M.; Robinson, C.W.; Anderson, E.K.; Pardini, A.F.

1994-01-01

The Robotics Development Groups at the Savannah River Site and the Hanford site have developed remote video and photography systems for deployment in underground radioactive waste storage tanks at Department of Energy (DOE) sites as a part of the Office of Technology Development (OTD) program within DOE. Figure 1 shows the remote video/photography systems in a typical underground storage tank environment. Viewing and documenting the tank interiors and their associated annular spaces is an extremely valuable tool in characterizing their condition and contents and in controlling their remediation. Several specialized video/photography systems and robotic End Effectors have been fabricated that provide remote viewing and lighting. All are remotely deployable into and from the tank, and all viewing functions are remotely operated. Positioning all control components away from the facility prevents the potential for personnel exposure to radiation and contamination. Overview video systems, both monaural and stereo versions, include a camera, zoom lens, camera positioner, vertical deployment system, and positional feedback. Each independent video package can be inserted through a 100 mm (4 in.) diameter opening. A special attribute of these packages is their design to never get larger than the entry hole during operation and to be fully retrievable. The End Effector systems will be deployed on the large robotic Light Duty Utility Arm (LDUA) being developed by other portions of the OTD-DOE programs. The systems implement a multi-functional ''over the coax'' design that uses a single coaxial cable for all data and control signals over the more than 900 foot cable (or fiber optic) link

The Future of Video

OpenAIRE

Li, F.

2016-01-01

Executive Summary \\ud \\ud A range of technological innovations (e.g. smart phones and digital cameras), infrastructural advances (e.g. broadband and 3G/4G wireless networks) and platform developments (e.g. YouTube, Facebook, Snapchat, Instagram, Amazon, and Netflix) are collectively transforming the way video is produced, distributed, consumed, archived – and importantly, monetised. Changes have been observed well beyond the mainstream TV and film industries, and these changes are increasingl...

An Aerial Video Stabilization Method Based on SURF Feature

Directory of Open Access Journals (Sweden)

Wu Hao

2016-01-01

Full Text Available The video captured by Micro Aerial Vehicle is often degraded due to unexpected random trembling and jitter caused by wind and the shake of the aerial platform. An approach for stabilizing the aerial video based on SURF feature and Kalman filter is proposed. SURF feature points are extracted in each frame, and the feature points between adjacent frames are matched using Fast Library for Approximate Nearest Neighbors search method. Then Random Sampling Consensus matching algorithm and Least Squares Method are used to remove mismatching points pairs, and estimate the transformation between the adjacent images. Finally, Kalman filter is applied to smooth the motion parameters and separate Intentional Motion from Unwanted Motion to stabilize the aerial video. Experiments results show that the approach can stabilize aerial video efficiently with high accuracy, and it is robust to the translation, rotation and zooming motion of camera.

Time-lapse video sysem used to study nesting gyrfalcons

Science.gov (United States)

Booms, Travis; Fuller, Mark R.

2003-01-01

We used solar-powered time-lapse video photography to document nesting Gyrfalcon (Falco rusticolus) food habits in central West Greenland from May to July in 2000 and 2001. We collected 2677.25 h of videotape from three nests, representing 94, 87, and 49% of the nestling period at each nest. The video recorded 921 deliveries of 832 prey items. We placed 95% of the items into prey categories. The image quality was good but did not reveal enough detail to identify most passerines to species. We found no evidence that Gyrfalcons were negatively affected by the video system after the initial camera set-up. The video system experienced some mechanical problems but proved reliable. The system likely can be used to effectively document the food habits and nesting behavior of other birds, especially those delivering large prey to a nest or other frequently used site.

Relacije umetnosti i video igara / Relations of Art and Video Games

OpenAIRE

Manojlo Maravić

2012-01-01

When discussing the art of video games, three different contexts need to be considered: the 'high' art (video games and the art); commercial video games (video games as the art) and the fan art. Video games are a legitimate artistic medium subject to modifications and recontextualisations in the process of creating a specific experience of the player/user/audience and political action by referring to particular social problems. They represent a high technological medium that increases, with p...

Distributed video data fusion and mining

Science.gov (United States)

Chang, Edward Y.; Wang, Yuan-Fang; Rodoplu, Volkan

2004-09-01

This paper presents an event sensing paradigm for intelligent event-analysis in a wireless, ad hoc, multi-camera, video surveillance system. In particilar, we present statistical methods that we have developed to support three aspects of event sensing: 1) energy-efficient, resource-conserving, and robust sensor data fusion and analysis, 2) intelligent event modeling and recognition, and 3) rapid deployment, dynamic configuration, and continuous operation of the camera networks. We outline our preliminary results, and discuss future directions that research might take.

Rare Disease Video Portal

OpenAIRE

Sánchez Bocanegra, Carlos Luis

2011-01-01

Rare Disease Video Portal (RD Video) is a portal web where contains videos from Youtube including all details from 12 channels of Youtube. Rare Disease Video Portal (RD Video) es un portal web que contiene los vídeos de Youtube incluyendo todos los detalles de 12 canales de Youtube. Rare Disease Video Portal (RD Video) és un portal web que conté els vídeos de Youtube i que inclou tots els detalls de 12 Canals de Youtube.

Medical students' perceptions of video-linked lectures and video-streaming

Directory of Open Access Journals (Sweden)

Karen Mattick

2010-12-01

Full Text Available Video-linked lectures allow healthcare students across multiple sites, and between university and hospital bases, to come together for the purposes of shared teaching. Recording and streaming video-linked lectures allows students to view them at a later date and provides an additional resource to support student learning. As part of a UK Higher Education Academy-funded Pathfinder project, this study explored medical students' perceptions of video-linked lectures and video-streaming, and their impact on learning. The methodology involved semi-structured interviews with 20 undergraduate medical students across four sites and five year groups. Several key themes emerged from the analysis. Students generally preferred live lectures at the home site and saw interaction between sites as a major challenge. Students reported that their attendance at live lectures was not affected by the availability of streamed lectures and tended to be influenced more by the topic and speaker than the technical arrangements. These findings will inform other educators interested in employing similar video technologies in their teaching.Keywords: video-linked lecture; video-streaming; student perceptions; decisionmaking; cross-campus teaching.

Automated Indexing and Search of Video Data in Large Collections with inVideo

Directory of Open Access Journals (Sweden)

Shuangbao Paul Wang

2017-08-01

Full Text Available In this paper, we present a novel system, inVideo, for automatically indexing and searching videos based on the keywords spoken in the audio track and the visual content of the video frames. Using the highly efficient video indexing engine we developed, inVideo is able to analyze videos using machine learning and pattern recognition without the need for initial viewing by a human. The time-stamped commenting and tagging features refine the accuracy of search results. The cloud-based implementation makes it possible to conduct elastic search, augmented search, and data analytics. Our research shows that inVideo presents an efficient tool in processing and analyzing videos and increasing interactions in video-based online learning environment. Data from a cybersecurity program with more than 500 students show that applying inVideo to current video material, interactions between student-student and student-faculty increased significantly across 24 sections program-wide.

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... YouTube Videos » NEI YouTube Videos: Amblyopia Listen NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration ... Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: ...

Measurement and protocol for evaluating video and still stabilization systems

Science.gov (United States)

Cormier, Etienne; Cao, Frédéric; Guichard, Frédéric; Viard, Clément

2013-01-01

This article presents a system and a protocol to characterize image stabilization systems both for still images and videos. It uses a six axes platform, three being used for camera rotation and three for camera positioning. The platform is programmable and can reproduce complex motions that have been typically recorded by a gyroscope mounted on different types of cameras in different use cases. The measurement uses a single chart for still image and videos, the texture dead leaves chart. Although the proposed implementation of the protocol uses a motion platform, the measurement itself does not rely on any specific hardware. For still images, a modulation transfer function is measured in different directions and is weighted by a contrast sensitivity function (simulating the human visual system accuracy) to obtain an acutance. The sharpness improvement due to the image stabilization system is a good measurement of performance as recommended by a CIPA standard draft. For video, four markers on the chart are detected with sub-pixel accuracy to determine a homographic deformation between the current frame and a reference position. This model describes well the apparent global motion as translations, but also rotations along the optical axis and distortion due to the electronic rolling shutter equipping most CMOS sensors. The protocol is applied to all types of cameras such as DSC, DSLR and smartphones.

Video digitizer (real time-frame grabber) with region of interest suitable for quantitative data analysis used on the infrared and H alpha cameras installed on the DIII-D experiment

International Nuclear Information System (INIS)

Ferguson, S.W.; Kevan, D.K.; Hill, D.N.; Allen, S.L.

1987-01-01

This paper describes a CAMAC based video digitizer with region of interest (ROI) capability that was designed for use with the infrared and H alpha cameras installed by Lawrence Livermore Laboratory on the DIII-D experiment at G.A. Technologies in San Diego, California. The video digitizer uses a custom built CAMAC video synchronizer module to clock data into a CAMAC transient recorder on a line-by-line basis starting at the beginning of a field. The number of fields that are recorded is limited only by the available transient recorder memory. In order to conserve memory, the CAMAC video synchronizer module provides for the alternative selection of a specific region of interest in each successive field to be recorded. Memory conservation can be optimized by specifying lines in the field, start time, stop time, and the number of data samples per line. This video frame grabber has proved versatile for capturing video in such diverse applications as recording video fields from a video tape recorder played in slow motion or recording video fields in real time during a DIII-D shot. In other cases, one or more lines of video are recorded per frame to give a cross sectional slice of the plasma. Since all the data in the digitizer memory is synchronized to video fields and lines, the data can be read directly into the control computer in the proper matrix format to facilitate rapid processing, display, and permanent storage

MAVIS: Mobile Acquisition and VISualization -\\ud a professional tool for video recording on a mobile platform

OpenAIRE

Watten, Phil; Gilardi, Marco; Holroyd, Patrick; Newbury, Paul

2015-01-01

Professional video recording is a complex process which often requires expensive cameras and large amounts of ancillary equipment.\\ud With the advancement of mobile technologies, cameras on mobile devices have improved to the point where the quality of their output is sometimes comparable to that obtained from a professional video camera and are often used in professional productions.\\ud However, tools that allow professional users to access the information they need to control the technical ...

Disembodied perspective: third-person images in GoPro videos

OpenAIRE

Bédard, Philippe

2015-01-01

Used as much in extreme-sports videos and professional productions as in amateur and home videos, GoPro wearable cameras have become ubiquitous in contemporary moving image culture. During its swift and ongoing rise in popularity, GoPro has also enabled the creation of new and unusual points of view, among which are “third-person images”. This article introduces and defines this particular phenomenon through an approach that deals with both the aesthetic and technical characteristics of the i...

Video Bioinformatics Analysis of Human Embryonic Stem Cell Colony Growth

Science.gov (United States)

Lin, Sabrina; Fonteno, Shawn; Satish, Shruthi; Bhanu, Bir; Talbot, Prue

2010-01-01

Because video data are complex and are comprised of many images, mining information from video material is difficult to do without the aid of computer software. Video bioinformatics is a powerful quantitative approach for extracting spatio-temporal data from video images using computer software to perform dating mining and analysis. In this article, we introduce a video bioinformatics method for quantifying the growth of human embryonic stem cells (hESC) by analyzing time-lapse videos collected in a Nikon BioStation CT incubator equipped with a camera for video imaging. In our experiments, hESC colonies that were attached to Matrigel were filmed for 48 hours in the BioStation CT. To determine the rate of growth of these colonies, recipes were developed using CL-Quant software which enables users to extract various types of data from video images. To accurately evaluate colony growth, three recipes were created. The first segmented the image into the colony and background, the second enhanced the image to define colonies throughout the video sequence accurately, and the third measured the number of pixels in the colony over time. The three recipes were run in sequence on video data collected in a BioStation CT to analyze the rate of growth of individual hESC colonies over 48 hours. To verify the truthfulness of the CL-Quant recipes, the same data were analyzed manually using Adobe Photoshop software. When the data obtained using the CL-Quant recipes and Photoshop were compared, results were virtually identical, indicating the CL-Quant recipes were truthful. The method described here could be applied to any video data to measure growth rates of hESC or other cells that grow in colonies. In addition, other video bioinformatics recipes can be developed in the future for other cell processes such as migration, apoptosis, and cell adhesion. PMID:20495527

A video event trigger for high frame rate, high resolution video technology

Science.gov (United States)

Williams, Glenn L.

1991-12-01

When video replaces film the digitized video data accumulates very rapidly, leading to a difficult and costly data storage problem. One solution exists for cases when the video images represent continuously repetitive 'static scenes' containing negligible activity, occasionally interrupted by short events of interest. Minutes or hours of redundant video frames can be ignored, and not stored, until activity begins. A new, highly parallel digital state machine generates a digital trigger signal at the onset of a video event. High capacity random access memory storage coupled with newly available fuzzy logic devices permits the monitoring of a video image stream for long term or short term changes caused by spatial translation, dilation, appearance, disappearance, or color change in a video object. Pretrigger and post-trigger storage techniques are then adaptable for archiving the digital stream from only the significant video images.

Privacy information management for video surveillance

Science.gov (United States)

Luo, Ying; Cheung, Sen-ching S.

2013-05-01

The widespread deployment of surveillance cameras has raised serious privacy concerns. Many privacy-enhancing schemes have been proposed to automatically redact images of trusted individuals in the surveillance video. To identify these individuals for protection, the most reliable approach is to use biometric signals such as iris patterns as they are immutable and highly discriminative. In this paper, we propose a privacy data management system to be used in a privacy-aware video surveillance system. The privacy status of a subject is anonymously determined based on her iris pattern. For a trusted subject, the surveillance video is redacted and the original imagery is considered to be the privacy information. Our proposed system allows a subject to access her privacy information via the same biometric signal for privacy status determination. Two secure protocols, one for privacy information encryption and the other for privacy information retrieval are proposed. Error control coding is used to cope with the variability in iris patterns and efficient implementation is achieved using surrogate data records. Experimental results on a public iris biometric database demonstrate the validity of our framework.

Risk analysis of a video-surveillance system

NARCIS (Netherlands)

Rothkrantz, L.; Lefter, I.

2011-01-01

The paper describes a surveillance system of cameras installed at lamppost of a military area. The surveillance system has been designed to detect unwanted visitors or suspicious behaviors. The area is composed of streets, building blocks and surrounded by gates and water. The video recordings are

Precise X-ray and video overlay for augmented reality fluoroscopy.

Science.gov (United States)

Chen, Xin; Wang, Lejing; Fallavollita, Pascal; Navab, Nassir

2013-01-01

The camera-augmented mobile C-arm (CamC) augments any mobile C-arm by a video camera and mirror construction and provides a co-registration of X-ray with video images. The accurate overlay between these images is crucial to high-quality surgical outcomes. In this work, we propose a practical solution that improves the overlay accuracy for any C-arm orientation by: (i) improving the existing CamC calibration, (ii) removing distortion effects, and (iii) accounting for the mechanical sagging of the C-arm gantry due to gravity. A planar phantom is constructed and placed at different distances to the image intensifier in order to obtain the optimal homography that co-registers X-ray and video with a minimum error. To alleviate distortion, both X-ray calibration based on equidistant grid model and Zhang's camera calibration method are implemented for distortion correction. Lastly, the virtual detector plane (VDP) method is adapted and integrated to reduce errors due to the mechanical sagging of the C-arm gantry. The overlay errors are 0.38±0.06 mm when not correcting for distortion, 0.27±0.06 mm when applying Zhang's camera calibration, and 0.27±0.05 mm when applying X-ray calibration. Lastly, when taking into account all angular and orbital rotations of the C-arm, as well as correcting for distortion, the overlay errors are 0.53±0.24 mm using VDP and 1.67±1.25 mm excluding VDP. The augmented reality fluoroscope achieves an accurate video and X-ray overlay when applying the optimal homography calculated from distortion correction using X-ray calibration together with the VDP.

Learning Science Through Digital Video: Views on Watching and Creating Videos

Science.gov (United States)

Wade, P.; Courtney, A. R.

2013-12-01

In science, the use of digital video to document phenomena, experiments and demonstrations has rapidly increased during the last decade. The use of digital video for science education also has become common with the wide availability of video over the internet. However, as with using any technology as a teaching tool, some questions should be asked: What science is being learned from watching a YouTube clip of a volcanic eruption or an informational video on hydroelectric power generation? What are student preferences (e.g. multimedia versus traditional mode of delivery) with regard to their learning? This study describes 1) the efficacy of watching digital video in the science classroom to enhance student learning, 2) student preferences of instruction with regard to multimedia versus traditional delivery modes, and 3) the use of creating digital video as a project-based educational strategy to enhance learning. Undergraduate non-science majors were the primary focus group in this study. Students were asked to view video segments and respond to a survey focused on what they learned from the segments. Additionally, they were asked about their preference for instruction (e.g. text only, lecture-PowerPoint style delivery, or multimedia-video). A majority of students indicated that well-made video, accompanied with scientific explanations or demonstration of the phenomena was most useful and preferred over text-only or lecture instruction for learning scientific information while video-only delivery with little or no explanation was deemed not very useful in learning science concepts. The use of student generated video projects as learning vehicles for the creators and other class members as viewers also will be discussed.

Kalman Filter Based Tracking in an Video Surveillance System

Directory of Open Access Journals (Sweden)

SULIMAN, C.

2010-05-01

Full Text Available In this paper we have developed a Matlab/Simulink based model for monitoring a contact in a video surveillance sequence. For the segmentation process and corect identification of a contact in a surveillance video, we have used the Horn-Schunk optical flow algorithm. The position and the behavior of the correctly detected contact were monitored with the help of the traditional Kalman filter. After that we have compared the results obtained from the optical flow method with the ones obtained from the Kalman filter, and we show the correct functionality of the Kalman filter based tracking. The tests were performed using video data taken with the help of a fix camera. The tested algorithm has shown promising results.

Shot Boundary Detection in Soccer Video using Twin-comparison Algorithm and Dominant Color Region

Directory of Open Access Journals (Sweden)

Matko Šarić

2008-06-01

Full Text Available The first step in generic video processing is temporal segmentation, i.e. shot boundary detection. Camera shot transitions can be either abrupt (e.g. cuts or gradual (e.g. fades, dissolves, wipes. Sports video is one of the most challenging domains for robust shot boundary detection. We proposed a shot boundary detection algorithm for soccer video based on the twin-comparison method and the absolute difference between frames in their ratios of dominant colored pixels to total number of pixels. With this approach the detection of gradual transitions is improved by decreasing the number of false positives caused by some camera operations. We also compared performances of our algorithm and the standard twin-comparison method.

Heterogeneity image patch index and its application to consumer video summarization.

Science.gov (United States)

Dang, Chinh T; Radha, Hayder

2014-06-01

Automatic video summarization is indispensable for fast browsing and efficient management of large video libraries. In this paper, we introduce an image feature that we refer to as heterogeneity image patch (HIP) index. The proposed HIP index provides a new entropy-based measure of the heterogeneity of patches within any picture. By evaluating this index for every frame in a video sequence, we generate a HIP curve for that sequence. We exploit the HIP curve in solving two categories of video summarization applications: key frame extraction and dynamic video skimming. Under the key frame extraction frame-work, a set of candidate key frames is selected from abundant video frames based on the HIP curve. Then, a proposed patch-based image dissimilarity measure is used to create affinity matrix of these candidates. Finally, a set of key frames is extracted from the affinity matrix using a min–max based algorithm. Under video skimming, we propose a method to measure the distance between a video and its skimmed representation. The video skimming problem is then mapped into an optimization framework and solved by minimizing a HIP-based distance for a set of extracted excerpts. The HIP framework is pixel-based and does not require semantic information or complex camera motion estimation. Our simulation results are based on experiments performed on consumer videos and are compared with state-of-the-art methods. It is shown that the HIP approach outperforms other leading methods, while maintaining low complexity.

Enhancements to the Sentinel Fireball Network Video Software

Science.gov (United States)

Watson, Wayne

2009-05-01

The Sentinel Fireball Network that supports meteor imaging of bright meteors (fireballs) has been in existence for over ten years. Nearly five years ago it moved from gathering meteor data with a camera and VCR video tape to a fisheye lens attached to a hardware device, the Sentinel box, which allowed meteor data to be recorded on a PC operating under real-time Linux. In 2006, that software, sentuser, was made available on Apple, Linux, and Window operating systems using the Python computer language. It provides basic video and management functionality and a small amount of analytic software capability. This paper describes the new and attractive future features of the software, and, additionally, it reviews some of the research and networks from the past and present using video equipment to collect and analyze fireball data that have applicability to sentuser.

IndigoVision IP video keeps watch over remote gas facilities in Amazon rainforest

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-07-15

In Brazil, IndigoVision's complete IP video security technology is being used to remotely monitor automated gas facilities in the Amazon rainforest. Twelve compounds containing millions of dollars of process automation, telemetry, and telecom equipment are spread across many thousands of miles of forest and centrally monitored in Rio de Janeiro using Control Center, the company's Security Management software. The security surveillance project uses a hybrid IP network comprising satellite, fibre optic, and wireless links. In addition to advanced compression technology and bandwidth tuning tools, the IP video system uses Activity Controlled Framerate (ACF), which controls the frame rate of the camera video stream based on the amount of motion in a scene. In the absence of activity, the video is streamed at a minimum framerate, but the moment activity is detected the framerate jumps to the configured maximum. This significantly reduces the amount of bandwidth needed. At each remote facility, fixed analog cameras are connected to transmitter nodules that convert the feed to high-quality digital video for transmission over the IP network. The system also integrates alarms with video surveillance. PIR intruder detectors are connected to the system via digital inputs on the transmitters. Advanced alarm-handling features in the Control Center software process the PIR detector alarms and alert operators to potential intrusions. This improves operator efficiency and incident response. 1 fig.

Video Design Games

DEFF Research Database (Denmark)

Smith, Rachel Charlotte; Christensen, Kasper Skov; Iversen, Ole Sejer

We introduce Video Design Games to train educators in teaching design. The Video Design Game is a workshop format consisting of three rounds in which participants observe, reflect and generalize based on video snippets from their own practice. The paper reports on a Video Design Game workshop...... in which 25 educators as part of a digital fabrication and design program were able to critically reflect on their teaching practice....

Key Issues in Modeling of Complex 3D Structures from Video Sequences

Directory of Open Access Journals (Sweden)

Shengyong Chen

2012-01-01

Full Text Available Construction of three-dimensional structures from video sequences has wide applications for intelligent video analysis. This paper summarizes the key issues of the theory and surveys the recent advances in the state of the art. Reconstruction of a scene object from video sequences often takes the basic principle of structure from motion with an uncalibrated camera. This paper lists the typical strategies and summarizes the typical solutions or algorithms for modeling of complex three-dimensional structures. Open difficult problems are also suggested for further study.

Video redaction: a survey and comparison of enabling technologies

Science.gov (United States)

Sah, Shagan; Shringi, Ameya; Ptucha, Raymond; Burry, Aaron; Loce, Robert

2017-09-01

With the prevalence of video recordings from smart phones, dash cams, body cams, and conventional surveillance cameras, privacy protection has become a major concern, especially in light of legislation such as the Freedom of Information Act. Video redaction is used to obfuscate sensitive and personally identifiable information. Today's typical workflow involves simple detection, tracking, and manual intervention. Automated methods rely on accurate detection mechanisms being paired with robust tracking methods across the video sequence to ensure the redaction of all sensitive information while minimizing spurious obfuscations. Recent studies have explored the use of convolution neural networks and recurrent neural networks for object detection and tracking. The present paper reviews the redaction problem and compares a few state-of-the-art detection, tracking, and obfuscation methods as they relate to redaction. The comparison introduces an evaluation metric that is specific to video redaction performance. The metric can be evaluated in a manner that allows balancing the penalty for false negatives and false positives according to the needs of particular application, thereby assisting in the selection of component methods and their associated hyperparameters such that the redacted video has fewer frames that require manual review.

Automatic Traffic Data Collection under Varying Lighting and Temperature Conditions in Multimodal Environments: Thermal versus Visible Spectrum Video-Based Systems

Directory of Open Access Journals (Sweden)

Ting Fu

2017-01-01

Full Text Available Vision-based monitoring systems using visible spectrum (regular video cameras can complement or substitute conventional sensors and provide rich positional and classification data. Although new camera technologies, including thermal video sensors, may improve the performance of digital video-based sensors, their performance under various conditions has rarely been evaluated at multimodal facilities. The purpose of this research is to integrate existing computer vision methods for automated data collection and evaluate the detection, classification, and speed measurement performance of thermal video sensors under varying lighting and temperature conditions. Thermal and regular video data was collected simultaneously under different conditions across multiple sites. Although the regular video sensor narrowly outperformed the thermal sensor during daytime, the performance of the thermal sensor is significantly better for low visibility and shadow conditions, particularly for pedestrians and cyclists. Retraining the algorithm on thermal data yielded an improvement in the global accuracy of 48%. Thermal speed measurements were consistently more accurate than for the regular video at daytime and nighttime. Thermal video is insensitive to lighting interference and pavement temperature, solves issues associated with visible light cameras for traffic data collection, and offers other benefits such as privacy, insensitivity to glare, storage space, and lower processing requirements.

Video-based self-review: comparing Google Glass and GoPro technologies.

Science.gov (United States)

Paro, John A M; Nazareli, Rahim; Gurjala, Anadev; Berger, Aaron; Lee, Gordon K

2015-05-01

Professionals in a variety of specialties use video-based review as a method of constant self-evaluation. We believe critical self-reflection will allow a surgical trainee to identify methods for improvement throughout residency and beyond. We have used 2 new popular technologies to evaluate their role in accomplishing the previously mentioned objectives. Our group investigated Google Glass and GoPro cameras. Medical students, residents, and faculty were invited to wear each of the devices during a scheduled operation. After the case, each participant was asked to comment on a number of features of the device including comfort, level of distraction/interference with operating, ease of video acquisition, and battery life. Software and hardware specifications were compiled and compared by the authors. A "proof-of-concept" was also performed using the video-conferencing abilities of Google Glass to perform a simulated flap check. The technical specifications of the 2 cameras favor GoPro over Google Glass. Glass records in 720p with 5-MP still shots, and the GoPro records in 1080p with 12-MP still shots. Our tests of battery life showed more than 2 hours of continuous video with GoPro, and less than 1 hour for Glass. Favorable features of Google Glass included comfort and relative ease of use; they could not comfortably wear loupes while operating, and would have preferred longer hands-free video recording. The GoPro was slightly more cumbersome and required a nonsterile team member to activate all pictures or video; however, loupes could be worn. Google Glass was successfully used in the hospital for a simulated flap check, with overall audio and video being transmitted--fine detail was lost, however. There are benefits and limitations to each of the devices tested. Google Glass is in its infancy and may gain a larger intraoperative role in the future. We plan to use Glass as a way for trainees to easily acquire intraoperative footage as a means to "review tape" and

Hierarchical video summarization

Science.gov (United States)

Ratakonda, Krishna; Sezan, M. Ibrahim; Crinon, Regis J.

1998-12-01

We address the problem of key-frame summarization of vide in the absence of any a priori information about its content. This is a common problem that is encountered in home videos. We propose a hierarchical key-frame summarization algorithm where a coarse-to-fine key-frame summary is generated. A hierarchical key-frame summary facilitates multi-level browsing where the user can quickly discover the content of the video by accessing its coarsest but most compact summary and then view a desired segment of the video with increasingly more detail. At the finest level, the summary is generated on the basis of color features of video frames, using an extension of a recently proposed key-frame extraction algorithm. The finest level key-frames are recursively clustered using a novel pairwise K-means clustering approach with temporal consecutiveness constraint. We also address summarization of MPEG-2 compressed video without fully decoding the bitstream. We also propose efficient mechanisms that facilitate decoding the video when the hierarchical summary is utilized in browsing and playback of video segments starting at selected key-frames.

Facial expression system on video using widrow hoff

Science.gov (United States)

Jannah, M.; Zarlis, M.; Mawengkang, H.

2018-03-01

Facial expressions recognition is one of interesting research. This research contains human feeling to computer application Such as the interaction between human and computer, data compression, facial animation and facial detection from the video. The purpose of this research is to create facial expression system that captures image from the video camera. The system in this research uses Widrow-Hoff learning method in training and testing image with Adaptive Linear Neuron (ADALINE) approach. The system performance is evaluated by two parameters, detection rate and false positive rate. The system accuracy depends on good technique and face position that trained and tested.

Rate control scheme for consistent video quality in scalable video codec.

Science.gov (United States)

Seo, Chan-Won; Han, Jong-Ki; Nguyen, Truong Q

2011-08-01

Multimedia data delivered to mobile devices over wireless channels or the Internet are complicated by bandwidth fluctuation and the variety of mobile devices. Scalable video coding has been developed as an extension of H.264/AVC to solve this problem. Since scalable video codec provides various scalabilities to adapt the bitstream for the channel conditions and terminal types, scalable codec is one of the useful codecs for wired or wireless multimedia communication systems, such as IPTV and streaming services. In such scalable multimedia communication systems, video quality fluctuation degrades the visual perception significantly. It is important to efficiently use the target bits in order to maintain a consistent video quality or achieve a small distortion variation throughout the whole video sequence. The scheme proposed in this paper provides a useful function to control video quality in applications supporting scalability, whereas conventional schemes have been proposed to control video quality in the H.264 and MPEG-4 systems. The proposed algorithm decides the quantization parameter of the enhancement layer to maintain a consistent video quality throughout the entire sequence. The video quality of the enhancement layer is controlled based on a closed-form formula which utilizes the residual data and quantization error of the base layer. The simulation results show that the proposed algorithm controls the frame quality of the enhancement layer in a simple operation, where the parameter decision algorithm is applied to each frame.

Protocol Standards for Reporting Video Data in Academic Journals.

Science.gov (United States)

Rowland, Pamela A; Ignacio, Romeo C; de Moya, Marc A

2016-04-01

Editors of biomedical journals have estimated that a majority (40%-90%) of studies published in scientific journals cannot be replicated, even though an inherent principle of publication is that others should be able to replicate and build on published claims. Each journal sets its own protocols for establishing "quality" in articles, yet over the past 50 years, few journals in any field--especially medical education--have specified protocols for reporting the use of video data in research. The authors found that technical and industry-driven aspects of video recording, as well as a lack of standardization and reporting requirements by research journals, have led to major limitations in the ability to assess or reproduce video data used in research. Specific variables in the videotaping process (e.g., camera angle), which can be changed or be modified, affect the quality of recorded data, leading to major reporting errors and, in turn, unreliable conclusions. As more data are now in the form of digital videos, the historical lack of reporting standards makes it increasingly difficult to accurately replicate medical educational studies. Reproducibility is especially important as the medical education community considers setting national high-stakes standards in medicine and surgery based on video data. The authors of this Perspective provide basic protocol standards for investigators and journals using video data in research publications so as to allow for reproducibility.

Part Two: Learning Science Through Digital Video: Student Views on Watching and Creating Videos

Science.gov (United States)

Wade, P.; Courtney, A. R.

2014-12-01

The use of digital video for science education has become common with the wide availability of video imagery. This study continues research into aspects of using digital video as a primary teaching tool to enhance student learning in undergraduate science courses. Two survey instruments were administered to undergraduate non-science majors. Survey One focused on: a) What science is being learned from watching science videos such as a "YouTube" clip of a volcanic eruption or an informational video on geologic time and b) What are student preferences with regard to their learning (e.g. using video versus traditional modes of delivery)? Survey Two addressed students' perspectives on the storytelling aspect of the video with respect to: a) sustaining interest, b) providing science information, c) style of video and d) quality of the video. Undergraduate non-science majors were the primary focus group in this study. Students were asked to view video segments and respond to a survey focused on what they learned from the segments. The storytelling aspect of each video was also addressed by students. Students watched 15-20 shorter (3-15 minute science videos) created within the last four years. Initial results of this research support that shorter video segments were preferred and the storytelling quality of each video related to student learning.

DV or Not DV: That is the Question When Producing Video for the Internet

Directory of Open Access Journals (Sweden)

Gregory Gutenko

2002-06-01

Full Text Available Pervasive advertising and marketing efforts promote consumer market digital video (DV format camcorders as the ideal acquisition technology for Internet video production. A shared digital nature and simple interconnections between cameras and computers using IEEE1394/FireWire/i.Link® format digital cabling do suggest a natural affinity between DV and Internet production. However, experience with Web delivery reveals numerous obstacles associated with consumer-friendly camcorder design and feature sets that can severely compromise Internet streaming video quality. This paper describes the various features in consumer and industrial grade DV camcorder designs that lead to unnecessary image quality loss, and what must be done to avoid such loss. Conventional video production techniques that can lead to quality loss regardless of the camera technology used are also identified. A number of recommendations are offered that will help the videographer in an educational or production environment adapt to Internet limitations.

The Use of Videos in Teaching - Some Experiences From the University of Copenhagen

Directory of Open Access Journals (Sweden)

Henrik Bregnhøj

2016-11-01

Full Text Available This paper covers videos created and used in different learning patterns. The videos are grouped according to the teaching or learning activities in which they are used. One group of videos are used by the teacher for one-way communication, including: online lectures, experts interacting with one another, instruction videos and introduction videos. Further videos are teacher-student interactive videos, including: feedback on student deliveries, student productions and interactive videos. Examples from different courses at different faculties at The University of Copenhagen of different types of videos (screencasts, pencasts and different kinds of camera recordings, from quick-and-dirty videos made by teachers at their own computer to professionally produced studio recordings as well as audio files are presented with links, as an empirical basis for the discussion. The paper is very practically oriented and looks at e.g. which course design and teaching situation is suitable for which type of video; at which point is an audio file preferable to a video file; and how to produce videos easily and without specialized equipment, if you don’t have access to (or time for professional assistance. In the article, we also point out how a small amount of tips & tricks regarding planning, design and presentation technique can improve recordings made by teachers themselves. We argue that the way to work with audio and video is to start by analyzing the pedagogical needs, in this way adapting the type and use of audio and video to the pedagogical context.

77 FR 48102 - Closed Captioning and Video Description of Video Programming

Science.gov (United States)

2012-08-13

... Captioning and Video Description of Video Programming AGENCY: Federal Communications Commission. [[Page 48103... show that providing captions on their programming would be economically burdensome. DATES: Effective...) establishing requirements for closed captioning on video programming to ensure access by persons with hearing...

Low-complexity JPEG-based progressive video codec for wireless video transmission

DEFF Research Database (Denmark)

Ukhanova, Ann; Forchhammer, Søren

2010-01-01

This paper discusses the question of video codec enhancement for wireless video transmission of high definition video data taking into account constraints on memory and complexity. Starting from parameter adjustment for JPEG2000 compression algorithm used for wireless transmission and achieving...

Data Compression by Shape Compensation for Mobile Video Sensors

Directory of Open Access Journals (Sweden)

Ben-Shung Chow

2009-04-01

Full Text Available Most security systems, with their transmission bandwidth and computing power both being sufficient, emphasize their automatic recognition techniques. However, in some situations such as baby monitors and intruder avoidance by mobile sensors, the decision function sometimes can be shifted to the concerned human to reduce the transmission and computation cost. We therefore propose a binary video compression method in low resolution to achieve a low cost mobile video communication for inexpensive camera sensors. Shape compensation as proposed in this communication successfully replaces the standard Discrete Cosine Transformation (DCT after motion compensation.

Video-based real-time on-street parking occupancy detection system

Science.gov (United States)

Bulan, Orhan; Loce, Robert P.; Wu, Wencheng; Wang, YaoRong; Bernal, Edgar A.; Fan, Zhigang

2013-10-01

Urban parking management is receiving significant attention due to its potential to reduce traffic congestion, fuel consumption, and emissions. Real-time parking occupancy detection is a critical component of on-street parking management systems, where occupancy information is relayed to drivers via smart phone apps, radio, Internet, on-road signs, or global positioning system auxiliary signals. Video-based parking occupancy detection systems can provide a cost-effective solution to the sensing task while providing additional functionality for traffic law enforcement and surveillance. We present a video-based on-street parking occupancy detection system that can operate in real time. Our system accounts for the inherent challenges that exist in on-street parking settings, including illumination changes, rain, shadows, occlusions, and camera motion. Our method utilizes several components from video processing and computer vision for motion detection, background subtraction, and vehicle detection. We also present three traffic law enforcement applications: parking angle violation detection, parking boundary violation detection, and exclusion zone violation detection, which can be integrated into the parking occupancy cameras as a value-added option. Our experimental results show that the proposed parking occupancy detection method performs in real-time at 5 frames/s and achieves better than 90% detection accuracy across several days of videos captured in a busy street block under various weather conditions such as sunny, cloudy, and rainy, among others.

Using Online Interactive Physics-based Video Analysis Exercises to Enhance Learning

Directory of Open Access Journals (Sweden)

Priscilla W. Laws

2017-04-01

Full Text Available As part of our new digital video age, physics students throughout the world can use smart phones, video cameras, computers and tablets to produce and analyze videos of physical phenomena using analysis software such as Logger Pro, Tracker or Coach. For several years, LivePhoto Physics Group members have created short videos of physical phenomena. They have also developed curricular materials that enable students to make predictions and use video analysis software to verify them. In this paper a new LivePhoto Physics project that involves the creation and testing of a series of Interactive Video Vignettes (IVVs will be described. IVVs are short webbased assignments that take less than ten minutes to complete. Each vignette is designed to present a video of a phenomenon, ask for a student’s prediction about it, and then conduct on-line video observations or analyses that allow the user to compare findings with his or her initial prediction. The Vignettes are designed for web delivery as ungraded exercises to supplement textbook reading, or to serve as pre-lecture or pre-laboratory activities that span a number of topics normally introduced in introductory physics courses. A sample Vignette on the topic of Newton’s Third Law will be described, and the outcomes of preliminary research on the impact of Vignettes on student motivation, learning and attitudes will be summarized.

Effective Educational Videos: Principles and Guidelines for Maximizing Student Learning from Video Content

Science.gov (United States)

Brame, Cynthia J.

2016-01-01

Educational videos have become an important part of higher education, providing an important content-delivery tool in many flipped, blended, and online classes. Effective use of video as an educational tool is enhanced when instructors consider three elements: how to manage cognitive load of the video; how to maximize student engagement with the video; and how to promote active learning from the video. This essay reviews literature relevant to each of these principles and suggests practical ways instructors can use these principles when using video as an educational tool. PMID:27789532

Measurement of the Dynamic Displacements of Railway Bridges Using Video Technology

Directory of Open Access Journals (Sweden)

Ribeiro Diogo

2015-01-01

Full Text Available This article describes the development of a non-contact dynamic displacement measurement system for railway bridges based on video technology. The system, consisting of a high speed video camera, an optical lens, lighting lamps and a precision target, can perform measurements with high precision for distances from the camera to the target up to 25 m, with acquisition frame rates ranging from 64 fps to 500 fps, and be articulated with other measurement systems, which promotes its integration in structural health monitoring systems. The system’s performance was evaluated based on two tests, one in the laboratory and other on the field. The laboratory test evaluated the performance of the system in measuring the displacement of a steel beam, subjected to a point load applied dynamically, for distances from the camera to the target between 3 m and 15 m. The field test allowed evaluating the system’s performance in the dynamic measurement of the displacement of a point on the deck of a railway bridge, induced by passing trains at speeds between 160 km/h and 180 km/h, for distances from the camera to the target up to 25 m. The results of both tests show a very good agreement between the displacement measurement obtained with the video system and with a LVDT.

Specialized video systems for use in waste tanks

International Nuclear Information System (INIS)

Anderson, E.K.; Robinson, C.W.; Heckendorn, F.M.

1992-01-01

The Robotics Development Group at the Savannah River Site is developing a remote video system for use in underground radioactive waste storage tanks at the Savannah River Site, as a portion of its site support role. Viewing of the tank interiors and their associated annular spaces is an extremely valuable tool in assessing their condition and controlling their operation. Several specialized video systems have been built that provide remote viewing and lighting, including remotely controlled tank entry and exit. Positioning all control components away from the facility prevents the potential for personnel exposure to radiation and contamination. The SRS waste tanks are nominal 4.5 million liter (1.3 million gallon) underground tanks used to store liquid high level radioactive waste generated by the site, awaiting final disposal. The typical waste tank (Figure 1) is of flattened shape (i.e. wider than high). The tanks sit in a dry secondary containment pan. The annular space between the tank wall and the secondary containment wall is continuously monitored for liquid intrusion and periodically inspected and documented. The latter was historically accomplished with remote still photography. The video systems includes camera, zoom lens, camera positioner, and vertical deployment. The assembly enters through a 125 mm (5 in) diameter opening. A special attribute of the systems is they never get larger than the entry hole during camera aiming etc. and can always be retrieved. The latest systems are easily deployable to a remote setup point and can extend down vertically 15 meters (50ft). The systems are expected to be a valuable asset to tank operations

Applied learning-based color tone mapping for face recognition in video surveillance system

Science.gov (United States)

Yew, Chuu Tian; Suandi, Shahrel Azmin

2012-04-01

In this paper, we present an applied learning-based color tone mapping technique for video surveillance system. This technique can be applied onto both color and grayscale surveillance images. The basic idea is to learn the color or intensity statistics from a training dataset of photorealistic images of the candidates appeared in the surveillance images, and remap the color or intensity of the input image so that the color or intensity statistics match those in the training dataset. It is well known that the difference in commercial surveillance cameras models, and signal processing chipsets used by different manufacturers will cause the color and intensity of the images to differ from one another, thus creating additional challenges for face recognition in video surveillance system. Using Multi-Class Support Vector Machines as the classifier on a publicly available video surveillance camera database, namely SCface database, this approach is validated and compared to the results of using holistic approach on grayscale images. The results show that this technique is suitable to improve the color or intensity quality of video surveillance system for face recognition.

What do we do with all this video? Better understanding public engagement for image and video annotation

Science.gov (United States)

Wiener, C.; Miller, A.; Zykov, V.

2016-12-01

Advanced robotic vehicles are increasingly being used by oceanographic research vessels to enable more efficient and widespread exploration of the ocean, particularly the deep ocean. With cutting-edge capabilities mounted onto robotic vehicles, data at high resolutions is being generated more than ever before, enabling enhanced data collection and the potential for broader participation. For example, high resolution camera technology not only improves visualization of the ocean environment, but also expands the capacity to engage participants remotely through increased use of telepresence and virtual reality techniques. Schmidt Ocean Institute is a private, non-profit operating foundation established to advance the understanding of the world's oceans through technological advancement, intelligent observation and analysis, and open sharing of information. Telepresence-enabled research is an important component of Schmidt Ocean Institute's science research cruises, which this presentation will highlight. Schmidt Ocean Institute is one of the only research programs that make their entire underwater vehicle dive series available online, creating a collection of video that enables anyone to follow deep sea research in real time. We encourage students, educators and the general public to take advantage of freely available dive videos. Additionally, other SOI-supported internet platforms, have engaged the public in image and video annotation activities. Examples of these new online platforms, which utilize citizen scientists to annotate scientific image and video data will be provided. This presentation will include an introduction to SOI-supported video and image tagging citizen science projects, real-time robot tracking, live ship-to-shore communications, and an array of outreach activities that enable scientists to interact with the public and explore the ocean in fascinating detail.

On-line video image processing system for real-time neutron radiography

Energy Technology Data Exchange (ETDEWEB)

Fujine, S; Yoneda, K; Kanda, K [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.

1983-09-15

The neutron radiography system installed at the E-2 experimental hole of the KUR (Kyoto University Reactor) has been used for some NDT applications in the nuclear field. The on-line video image processing system of this facility is introduced in this paper. A 0.5 mm resolution in images was obtained by using a super high quality TV camera developed for X-radiography viewing a NE-426 neutron-sensitive scintillator. The image of the NE-426 on a CRT can be observed directly and visually, thus many test samples can be sequentially observed when necessary for industrial purposes. The video image signals from the TV camera are digitized, with a 33 ms delay, through a video A/D converter (ADC) and can be stored in the image buffer (32 KB DRAM) of a microcomputer (Z-80) system. The digitized pictures are taken with 16 levels of gray scale and resolved to 240 x 256 picture elements (pixels) on a monochrome CRT, with the capability also to display 16 distinct colors on a RGB video display. The direct image of this system could be satisfactory for penetrating the side plates to test MTR type reactor fuels and for the investigation of moving objects.

Performance Analysis of Video Transmission Using Sequential Distortion Minimization Method for Digital Video Broadcasting Terrestrial

Directory of Open Access Journals (Sweden)

Novita Astin

2016-12-01

Full Text Available This paper presents about the transmission of Digital Video Broadcasting system with streaming video resolution 640x480 on different IQ rate and modulation. In the video transmission, distortion often occurs, so the received video has bad quality. Key frames selection algorithm is flexibel on a change of video, but on these methods, the temporal information of a video sequence is omitted. To minimize distortion between the original video and received video, we aimed at adding methodology using sequential distortion minimization algorithm. Its aim was to create a new video, better than original video without significant loss of content between the original video and received video, fixed sequentially. The reliability of video transmission was observed based on a constellation diagram, with the best result on IQ rate 2 Mhz and modulation 8 QAM. The best video transmission was also investigated using SEDIM (Sequential Distortion Minimization Method and without SEDIM. The experimental result showed that the PSNR (Peak Signal to Noise Ratio average of video transmission using SEDIM was an increase from 19,855 dB to 48,386 dB and SSIM (Structural Similarity average increase 10,49%. The experimental results and comparison of proposed method obtained a good performance. USRP board was used as RF front-end on 2,2 GHz.

High Definition Video Streaming Using H.264 Video Compression

OpenAIRE

Bechqito, Yassine

2009-01-01

This thesis presents high definition video streaming using H.264 codec implementation. The experiment carried out in this study was done for an offline streaming video but a model for live high definition streaming is introduced, as well. Prior to the actual experiment, this study describes digital media streaming. Also, the different technologies involved in video streaming are covered. These include streaming architecture and a brief overview on H.264 codec as well as high definition t...

Video Quality Assessment Using Spatio-Velocity Contrast Sensitivity Function

Science.gov (United States)

Hirai, Keita; Tumurtogoo, Jambal; Kikuchi, Ayano; Tsumura, Norimichi; Nakaguchi, Toshiya; Miyake, Yoichi

Due to the development and popularization of high-definition televisions, digital video cameras, Blu-ray discs, digital broadcasting, IP television and so on, it plays an important role to identify and quantify video quality degradations. In this paper, we propose SV-CIELAB which is an objective video quality assessment (VQA) method using a spatio-velocity contrast sensitivity function (SV-CSF). In SV-CIELAB, motion information in videos is effectively utilized for filtering unnecessary information in the spatial frequency domain. As the filter to apply videos, we used the SV-CSF. It is a modulation transfer function of the human visual system, and consists of the relationship among contrast sensitivities, spatial frequencies and velocities of perceived stimuli. In the filtering process, the SV-CSF cannot be directly applied in the spatial frequency domain because spatial coordinate information is required when using velocity information. For filtering by the SV-CSF, we obtain video frames separated in spatial frequency domain. By using velocity information, the separated frames with limited spatial frequencies are weighted by contrast sensitivities in the SV-CSF model. In SV-CIELAB, the criteria are obtained by calculating image differences between filtered original and distorted videos. For the validation of SV-CIELAB, subjective evaluation experiments were conducted. The subjective experimental results were compared with SV-CIELAB and the conventional VQA methods such as CIELAB color difference, Spatial-CIELAB, signal to noise ratio and so on. From the experimental results, it was shown that SV-CIELAB is a more efficient VQA method than the conventional methods.

The Twist Tensor Nuclear Norm for Video Completion.

Science.gov (United States)

Hu, Wenrui; Tao, Dacheng; Zhang, Wensheng; Xie, Yuan; Yang, Yehui

2017-12-01

In this paper, we propose a new low-rank tensor model based on the circulant algebra, namely, twist tensor nuclear norm (t-TNN). The twist tensor denotes a three-way tensor representation to laterally store 2-D data slices in order. On one hand, t-TNN convexly relaxes the tensor multirank of the twist tensor in the Fourier domain, which allows an efficient computation using fast Fourier transform. On the other, t-TNN is equal to the nuclear norm of block circulant matricization of the twist tensor in the original domain, which extends the traditional matrix nuclear norm in a block circulant way. We test the t-TNN model on a video completion application that aims to fill missing values and the experiment results validate its effectiveness, especially when dealing with video recorded by a nonstationary panning camera. The block circulant matricization of the twist tensor can be transformed into a circulant block representation with nuclear norm invariance. This representation, after transformation, exploits the horizontal translation relationship between the frames in a video, and endows the t-TNN model with a more powerful ability to reconstruct panning videos than the existing state-of-the-art low-rank models.

Online video examination

DEFF Research Database (Denmark)

Qvist, Palle

have large influence on their own teaching, learning and curriculum. The programme offers streamed videos in combination with other learning resources. It is a concept which offers video as pure presentation - video lectures - but also as an instructional tool which gives the students the possibility...... to construct their knowledge, collaboration and communication. In its first years the programme has used Skype video communication for collaboration and communication within and between groups, group members and their facilitators. Also exams have been mediated with the help of Skype and have for all students......, examiners and external examiners been a challenge and opportunity and has brought new knowledge and experience. This paper brings results from a questionnaire focusing on how the students experience the video examination....

People detection in nuclear plants by video processing for safety purpose

Energy Technology Data Exchange (ETDEWEB)

Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A., E-mail: calexandre@ien.gov.b, E-mail: mol@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN), Rio de Janeiro, RJ (Brazil); Seixas, Jose M.; Silva, Eduardo Antonio B., E-mail: seixas@lps.ufrj.b, E-mail: eduardo@lps.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Eletrica; Cota, Raphael E.; Ramos, Bruno L., E-mail: brunolange@poli.ufrj.b [Universidade Federal do Rio de Janeiro (EP/UFRJ), RJ (Brazil). Dept. de Engenharia Eletronica e de Computacao

2011-07-01

This work describes the development of a surveillance system for safety purposes in nuclear plants. The final objective is to track people online in videos, in order to estimate the dose received by personnel, during the execution of working tasks in nuclear plants. The estimation will be based on their tracked positions and on dose rate mapping in a real nuclear plant at Instituto de Engenharia Nuclear, Argonauta nuclear research reactor. Cameras have been installed within Argonauta's room, supplying the data needed. Both video processing and statistical signal processing techniques may be used for detection, segmentation and tracking people in video. This first paper reports people segmentation in video using background subtraction, by two different approaches, namely frame differences, and blind signal separation based on the independent component analysis method. Results are commented, along with perspectives for further work. (author)

People detection in nuclear plants by video processing for safety purpose

International Nuclear Information System (INIS)

Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A.; Seixas, Jose M.; Silva, Eduardo Antonio B.; Cota, Raphael E.; Ramos, Bruno L.

2011-01-01

This work describes the development of a surveillance system for safety purposes in nuclear plants. The final objective is to track people online in videos, in order to estimate the dose received by personnel, during the execution of working tasks in nuclear plants. The estimation will be based on their tracked positions and on dose rate mapping in a real nuclear plant at Instituto de Engenharia Nuclear, Argonauta nuclear research reactor. Cameras have been installed within Argonauta's room, supplying the data needed. Both video processing and statistical signal processing techniques may be used for detection, segmentation and tracking people in video. This first paper reports people segmentation in video using background subtraction, by two different approaches, namely frame differences, and blind signal separation based on the independent component analysis method. Results are commented, along with perspectives for further work. (author)

Nest-crowdcontrol: Advanced video-based crowd monitoring for large public events

OpenAIRE

Monari, Eduardo; Fischer, Yvonne; Anneken, Mathias

2015-01-01

Current video surveillance systems still lack of intelligent video and data analysis modules for supporting situation awareness of decision makers. Especially in mass gatherings like large public events, the decision maker would benefit from different views of the area, especially from crowd density estimations. This article describes a multi-camera system called NEST and its application for crowd density analysis. First, the overall system design is presented. Based on this, the crowd densit...

Evaluation of intrusion sensors and video assessment in areas of restricted passage

International Nuclear Information System (INIS)

Hoover, C.E.; Ringler, C.E.

1996-04-01

This report discusses an evaluation of intrusion sensors and video assessment in areas of restricted passage. The discussion focuses on applications of sensors and video assessment in suspended ceilings and air ducts. It also includes current and proposed requirements for intrusion detection and assessment. Detection and nuisance alarm characteristics of selected sensors as well as assessment capabilities of low-cost board cameras were included in the evaluation

Industrial-Strength Streaming Video.

Science.gov (United States)

Avgerakis, George; Waring, Becky

1997-01-01

Corporate training, financial services, entertainment, and education are among the top applications for streaming video servers, which send video to the desktop without downloading the whole file to the hard disk, saving time and eliminating copyrights questions. Examines streaming video technology, lists ten tips for better net video, and ranks…

Automated UAV-based mapping for airborne reconnaissance and video exploitation

Science.gov (United States)

Se, Stephen; Firoozfam, Pezhman; Goldstein, Norman; Wu, Linda; Dutkiewicz, Melanie; Pace, Paul; Naud, J. L. Pierre

2009-05-01

Airborne surveillance and reconnaissance are essential for successful military missions. Such capabilities are critical for force protection, situational awareness, mission planning, damage assessment and others. UAVs gather huge amount of video data but it is extremely labour-intensive for operators to analyse hours and hours of received data. At MDA, we have developed a suite of tools towards automated video exploitation including calibration, visualization, change detection and 3D reconstruction. The on-going work is to improve the robustness of these tools and automate the process as much as possible. Our calibration tool extracts and matches tie-points in the video frames incrementally to recover the camera calibration and poses, which are then refined by bundle adjustment. Our visualization tool stabilizes the video, expands its field-of-view and creates a geo-referenced mosaic from the video frames. It is important to identify anomalies in a scene, which may include detecting any improvised explosive devices (IED). However, it is tedious and difficult to compare video clips to look for differences manually. Our change detection tool allows the user to load two video clips taken from two passes at different times and flags any changes between them. 3D models are useful for situational awareness, as it is easier to understand the scene by visualizing it in 3D. Our 3D reconstruction tool creates calibrated photo-realistic 3D models from video clips taken from different viewpoints, using both semi-automated and automated approaches. The resulting 3D models also allow distance measurements and line-of- sight analysis.

Video change detection for fixed wing UAVs

Science.gov (United States)

Bartelsen, Jan; Müller, Thomas; Ring, Jochen; Mück, Klaus; Brüstle, Stefan; Erdnüß, Bastian; Lutz, Bastian; Herbst, Theresa

2017-10-01

In this paper we proceed the work of Bartelsen et al.1 We present the draft of a process chain for an image based change detection which is designed for videos acquired by fixed wing unmanned aerial vehicles (UAVs). From our point of view, automatic video change detection for aerial images can be useful to recognize functional activities which are typically caused by the deployment of improvised explosive devices (IEDs), e.g. excavations, skid marks, footprints, left-behind tooling equipment, and marker stones. Furthermore, in case of natural disasters, like flooding, imminent danger can be recognized quickly. Due to the necessary flight range, we concentrate on fixed wing UAVs. Automatic change detection can be reduced to a comparatively simple photogrammetric problem when the perspective change between the "before" and "after" image sets is kept as small as possible. Therefore, the aerial image acquisition demands a mission planning with a clear purpose including flight path and sensor configuration. While the latter can be enabled simply by a fixed and meaningful adjustment of the camera, ensuring a small perspective change for "before" and "after" videos acquired by fixed wing UAVs is a challenging problem. Concerning this matter, we have performed tests with an advanced commercial off the shelf (COTS) system which comprises a differential GPS and autopilot system estimating the repetition accuracy of its trajectory. Although several similar approaches have been presented,23 as far as we are able to judge, the limits for this important issue are not estimated so far. Furthermore, we design a process chain to enable the practical utilization of video change detection. It consists of a front-end of a database to handle large amounts of video data, an image processing and change detection implementation, and the visualization of the results. We apply our process chain on the real video data acquired by the advanced COTS fixed wing UAV and synthetic data. For the

Video modeling by experts with video feedback to enhance gymnastics skills.

Science.gov (United States)

Boyer, Eva; Miltenberger, Raymond G; Batsche, Catherine; Fogel, Victoria

2009-01-01

The effects of combining video modeling by experts with video feedback were analyzed with 4 female competitive gymnasts (7 to 10 years old) in a multiple baseline design across behaviors. During the intervention, after the gymnast performed a specific gymnastics skill, she viewed a video segment showing an expert gymnast performing the same skill and then viewed a video replay of her own performance of the skill. The results showed that all gymnasts demonstrated improved performance across three gymnastics skills following exposure to the intervention.

GPS-Aided Video Tracking

Directory of Open Access Journals (Sweden)

Udo Feuerhake

2015-08-01

Full Text Available Tracking moving objects is both challenging and important for a large variety of applications. Different technologies based on the global positioning system (GPS and video or radio data are used to obtain the trajectories of the observed objects. However, in some use cases, they fail to provide sufficiently accurate, complete and correct data at the same time. In this work we present an approach for fusing GPS- and video-based tracking in order to exploit their individual advantages. In this way we aim to combine the reliability of GPS tracking with the high geometric accuracy of camera detection. For the fusion of the movement data provided by the different devices we use a hidden Markov model (HMM formulation and the Viterbi algorithm to extract the most probable trajectories. In three experiments, we show that our approach is able to deal with challenging situations like occlusions or objects which are temporarily outside the monitored area. The results show the desired increase in terms of accuracy, completeness and correctness.

A Novel Quantum Video Steganography Protocol with Large Payload Based on MCQI Quantum Video

Science.gov (United States)

Qu, Zhiguo; Chen, Siyi; Ji, Sai

2017-11-01

As one of important multimedia forms in quantum network, quantum video attracts more and more attention of experts and scholars in the world. A secure quantum video steganography protocol with large payload based on the video strip encoding method called as MCQI (Multi-Channel Quantum Images) is proposed in this paper. The new protocol randomly embeds the secret information with the form of quantum video into quantum carrier video on the basis of unique features of video frames. It exploits to embed quantum video as secret information for covert communication. As a result, its capacity are greatly expanded compared with the previous quantum steganography achievements. Meanwhile, the new protocol also achieves good security and imperceptibility by virtue of the randomization of embedding positions and efficient use of redundant frames. Furthermore, the receiver enables to extract secret information from stego video without retaining the original carrier video, and restore the original quantum video as a follow. The simulation and experiment results prove that the algorithm not only has good imperceptibility, high security, but also has large payload.

Remote Video Auditing in the Surgical Setting.

Science.gov (United States)

Pedersen, Anne; Getty Ritter, Elizabeth; Beaton, Megan; Gibbons, David

2017-02-01

Remote video auditing, a method first adopted by the food preparation industry, was later introduced to the health care industry as a novel approach to improving hand hygiene practices. This strategy yielded tremendous and sustained improvement, causing leaders to consider the potential effects of such technology on the complex surgical environment. This article outlines the implementation of remote video auditing and the first year of activity, outcomes, and measurable successes in a busy surgery department in the eastern United States. A team of anesthesia care providers, surgeons, and OR personnel used low-resolution cameras, large-screen displays, and cell phone alerts to make significant progress in three domains: application of the Universal Protocol for preventing wrong site, wrong procedure, wrong person surgery; efficiency metrics; and cleaning compliance. The use of cameras with real-time auditing and results-sharing created an environment of continuous learning, compliance, and synergy, which has resulted in a safer, cleaner, and more efficient OR. Copyright © 2017 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Social Properties of Mobile Video

Science.gov (United States)

Mitchell, April Slayden; O'Hara, Kenton; Vorbau, Alex

Mobile video is now an everyday possibility with a wide array of commercially available devices, services, and content. These new technologies have created dramatic shifts in the way video-based media can be produced, consumed, and delivered by people beyond the familiar behaviors associated with fixed TV and video technologies. Such technology revolutions change the way users behave and change their expectations in regards to their mobile video experiences. Building upon earlier studies of mobile video, this paper reports on a study using diary techniques and ethnographic interviews to better understand how people are using commercially available mobile video technologies in their everyday lives. Drawing on reported episodes of mobile video behavior, the study identifies the social motivations and values underpinning these behaviors that help characterize mobile video consumption beyond the simplistic notion of viewing video only to kill time. This paper also discusses the significance of user-generated content and the usage of video in social communities through the description of two mobile video technology services that allow users to create and share content. Implications for adoption and design of mobile video technologies and services are discussed as well.

Video Podcasts

DEFF Research Database (Denmark)

Nortvig, Anne Mette; Sørensen, Birgitte Holm

2016-01-01

This project’s aim was to support and facilitate master’s students’ preparation and collaboration by making video podcasts of short lectures available on YouTube prior to students’ first face-to-face seminar. The empirical material stems from group interviews, from statistical data created through...... YouTube analytics and from surveys answered by students after the seminar. The project sought to explore how video podcasts support learning and reflection online and how students use and reflect on the integration of online activities in the videos. Findings showed that students engaged actively...

Video games.

Science.gov (United States)

Funk, Jeanne B

2005-06-01

The video game industry insists that it is doing everything possible to provide information about the content of games so that parents can make informed choices; however, surveys indicate that ratings may not reflect consumer views of the nature of the content. This article describes some of the currently popular video games, as well as developments that are on the horizon, and discusses the status of research on the positive and negative impacts of playing video games. Recommendations are made to help parents ensure that children play games that are consistent with their values.

Direct measurement of erythrocyte deformability in diabetes mellitus with a transparent microchannel capillary model and high-speed video camera system.

Science.gov (United States)

Tsukada, K; Sekizuka, E; Oshio, C; Minamitani, H

2001-05-01

To measure erythrocyte deformability in vitro, we made transparent microchannels on a crystal substrate as a capillary model. We observed axisymmetrically deformed erythrocytes and defined a deformation index directly from individual flowing erythrocytes. By appropriate choice of channel width and erythrocyte velocity, we could observe erythrocytes deforming to a parachute-like shape similar to that occurring in capillaries. The flowing erythrocytes magnified 200-fold through microscopy were recorded with an image-intensified high-speed video camera system. The sensitivity of deformability measurement was confirmed by comparing the deformation index in healthy controls with erythrocytes whose membranes were hardened by glutaraldehyde. We confirmed that the crystal microchannel system is a valuable tool for erythrocyte deformability measurement. Microangiopathy is a characteristic complication of diabetes mellitus. A decrease in erythrocyte deformability may be part of the cause of this complication. In order to identify the difference in erythrocyte deformability between control and diabetic erythrocytes, we measured erythrocyte deformability using transparent crystal microchannels and a high-speed video camera system. The deformability of diabetic erythrocytes was indeed measurably lower than that of erythrocytes in healthy controls. This result suggests that impaired deformability in diabetic erythrocytes can cause altered viscosity and increase the shear stress on the microvessel wall. Copyright 2001 Academic Press.

Video steganography based on bit-plane decomposition of wavelet-transformed video

Science.gov (United States)

Noda, Hideki; Furuta, Tomofumi; Niimi, Michiharu; Kawaguchi, Eiji

2004-06-01

This paper presents a steganography method using lossy compressed video which provides a natural way to send a large amount of secret data. The proposed method is based on wavelet compression for video data and bit-plane complexity segmentation (BPCS) steganography. BPCS steganography makes use of bit-plane decomposition and the characteristics of the human vision system, where noise-like regions in bit-planes of a dummy image are replaced with secret data without deteriorating image quality. In wavelet-based video compression methods such as 3-D set partitioning in hierarchical trees (SPIHT) algorithm and Motion-JPEG2000, wavelet coefficients in discrete wavelet transformed video are quantized into a bit-plane structure and therefore BPCS steganography can be applied in the wavelet domain. 3-D SPIHT-BPCS steganography and Motion-JPEG2000-BPCS steganography are presented and tested, which are the integration of 3-D SPIHT video coding and BPCS steganography, and that of Motion-JPEG2000 and BPCS, respectively. Experimental results show that 3-D SPIHT-BPCS is superior to Motion-JPEG2000-BPCS with regard to embedding performance. In 3-D SPIHT-BPCS steganography, embedding rates of around 28% of the compressed video size are achieved for twelve bit representation of wavelet coefficients with no noticeable degradation in video quality.

Statistical Analysis of Video Frame Size Distribution Originating from Scalable Video Codec (SVC

Directory of Open Access Journals (Sweden)

Sima Ahmadpour

2017-01-01

Full Text Available Designing an effective and high performance network requires an accurate characterization and modeling of network traffic. The modeling of video frame sizes is normally applied in simulation studies and mathematical analysis and generating streams for testing and compliance purposes. Besides, video traffic assumed as a major source of multimedia traffic in future heterogeneous network. Therefore, the statistical distribution of video data can be used as the inputs for performance modeling of networks. The finding of this paper comprises the theoretical definition of distribution which seems to be relevant to the video trace in terms of its statistical properties and finds the best distribution using both the graphical method and the hypothesis test. The data set used in this article consists of layered video traces generating from Scalable Video Codec (SVC video compression technique of three different movies.

Robust Adaptable Video Copy Detection

DEFF Research Database (Denmark)

Assent, Ira; Kremer, Hardy

2009-01-01

in contrast). Our query processing combines filtering and indexing structures for efficient multistep computation of video copies under this model. We show that our model successfully identifies altered video copies and does so more reliably than existing models.......Video copy detection should be capable of identifying video copies subject to alterations e.g. in video contrast or frame rates. We propose a video copy detection scheme that allows for adaptable detection of videos that are altered temporally (e.g. frame rate change) and/or visually (e.g. change...

Development of P4140 video data wall projector; Video data wall projector

Energy Technology Data Exchange (ETDEWEB)

Watanabe, H.; Inoue, H. [Toshiba Corp., Tokyo (Japan)

1998-12-01

The P4140 is a 3 cathode-ray tube (CRT) video data wall projector for super video graphics array (SVGA) signals. It is used as an image display unit, providing a large screen when several sets are put together. A high-quality picture has been realized by higher resolution and improved color uniformity technology. A new convergence adjustment system has also been developed through the optimal combination of digital and analog technologies. This video data wall installation has been greatly enhanced by the automation of cubes and cube performance settings. The P4140 video data wall projector can be used for displaying not only data but video as well. (author)

Brownian motion using video capture

International Nuclear Information System (INIS)

Salmon, Reese; Robbins, Candace; Forinash, Kyle

2002-01-01

Although other researchers had previously observed the random motion of pollen grains suspended in water through a microscope, Robert Brown's name is associated with this behaviour based on observations he made in 1828. It was not until Einstein's work in the early 1900s however, that the origin of this irregular motion was established to be the result of collisions with molecules which were so small as to be invisible in a light microscope (Einstein A 1965 Investigations on the Theory of the Brownian Movement ed R Furth (New York: Dover) (transl. Cowper A D) (5 papers)). Jean Perrin in 1908 (Perrin J 1923 Atoms (New York: Van Nostrand-Reinhold) (transl. Hammick D)) was able, through a series of painstaking experiments, to establish the validity of Einstein's equation. We describe here the details of a junior level undergraduate physics laboratory experiment where students used a microscope, a video camera and video capture software to verify Einstein's famous calculation of 1905. (author)

Advanced video coding systems

CERN Document Server

Gao, Wen

2015-01-01

This comprehensive and accessible text/reference presents an overview of the state of the art in video coding technology. Specifically, the book introduces the tools of the AVS2 standard, describing how AVS2 can help to achieve a significant improvement in coding efficiency for future video networks and applications by incorporating smarter coding tools such as scene video coding. Topics and features: introduces the basic concepts in video coding, and presents a short history of video coding technology and standards; reviews the coding framework, main coding tools, and syntax structure of AV

Intelligent video surveillance systems

CERN Document Server

Dufour, Jean-Yves

2012-01-01

Belonging to the wider academic field of computer vision, video analytics has aroused a phenomenal surge of interest since the current millennium. Video analytics is intended to solve the problem of the incapability of exploiting video streams in real time for the purpose of detection or anticipation. It involves analyzing the videos using algorithms that detect and track objects of interest over time and that indicate the presence of events or suspect behavior involving these objects.The aims of this book are to highlight the operational attempts of video analytics, to identify possi

On-board processing of video image sequences

DEFF Research Database (Denmark)

Andersen, Jakob Dahl; Chanrion, Olivier Arnaud; Forchhammer, Søren

2008-01-01

and evaluated. On-board there are six video cameras each capturing images of 1024times1024 pixels of 12 bpp at a frame rate of 15 fps, thus totalling 1080 Mbits/s. In comparison the average downlink data rate for these images is projected to be 50 kbit/s. This calls for efficient on-board processing to select...

Video Vectorization via Tetrahedral Remeshing.

Science.gov (United States)

Wang, Chuan; Zhu, Jie; Guo, Yanwen; Wang, Wenping

2017-02-09

We present a video vectorization method that generates a video in vector representation from an input video in raster representation. A vector-based video representation offers the benefits of vector graphics, such as compactness and scalability. The vector video we generate is represented by a simplified tetrahedral control mesh over the spatial-temporal video volume, with color attributes defined at the mesh vertices. We present novel techniques for simplification and subdivision of a tetrahedral mesh to achieve high simplification ratio while preserving features and ensuring color fidelity. From an input raster video, our method is capable of generating a compact video in vector representation that allows a faithful reconstruction with low reconstruction errors.

Application of video imaging for improvement of patient set-up

International Nuclear Information System (INIS)

Ploeger, Lennert S.; Frenay, Michel; Betgen, Anja; Bois, Josien A. de; Gilhuijs, Kenneth G.A.; Herk, Marcel van

2003-01-01

Background and purpose: For radiotherapy of prostate cancer, the patient is usually positioned in the left-right (LR) direction by aligning a single marker on the skin with the projection of a room laser. The aim of this study is to investigate the feasibility of a room-mounted video camera in combination with previously acquired CT data to improve patient set-up along the LR axis. Material and methods: The camera was mounted in the treatment room at the caudal side of the patient. For 22 patients with prostate cancer 127 video and portal images were acquired. The set-up error determined by video imaging was found by matching video images with rendered CT images using various techniques. This set-up error was retrospectively compared with the set-up error derived from portal images. It was investigated whether the number of corrections based on portal imaging would decrease if the information obtained from the video images had been used prior to irradiation. Movement of the skin with respect to bone was quantified using an analysis of variance method. Results: The measurement of the set-up error was most accurate for a technique where outlines and groins on the left and right side of the patient were delineated and aligned individually to the corresponding features extracted from the rendered CT image. The standard deviations (SD) of the systematic and random components of the set-up errors derived from the portal images in the LR direction were 1.5 and 2.1 mm, respectively. When the set-up of the patients was retrospectively adjusted based on the video images, the SD of the systematic and random errors decreased to 1.1 and 1.3 mm, respectively. From retrospective analysis, a reduction of the number of set-up corrections (from nine to six corrections) is expected when the set-up would have been adjusted using the video images. The SD of the magnitude of motion of the skin of the patient with respect to the bony anatomy was estimated to be 1.1 mm. Conclusion: Video

Video-rate or high-precision: a flexible range imaging camera

Science.gov (United States)

Dorrington, Adrian A.; Cree, Michael J.; Carnegie, Dale A.; Payne, Andrew D.; Conroy, Richard M.; Godbaz, John P.; Jongenelen, Adrian P. P.

2008-02-01

A range imaging camera produces an output similar to a digital photograph, but every pixel in the image contains distance information as well as intensity. This is useful for measuring the shape, size and location of objects in a scene, hence is well suited to certain machine vision applications. Previously we demonstrated a heterodyne range imaging system operating in a relatively high resolution (512-by-512) pixels and high precision (0.4 mm best case) configuration, but with a slow measurement rate (one every 10 s). Although this high precision range imaging is useful for some applications, the low acquisition speed is limiting in many situations. The system's frame rate and length of acquisition is fully configurable in software, which means the measurement rate can be increased by compromising precision and image resolution. In this paper we demonstrate the flexibility of our range imaging system by showing examples of high precision ranging at slow acquisition speeds and video-rate ranging with reduced ranging precision and image resolution. We also show that the heterodyne approach and the use of more than four samples per beat cycle provides better linearity than the traditional homodyne quadrature detection approach. Finally, we comment on practical issues of frame rate and beat signal frequency selection.

The modular integrated video system (MIVS)

International Nuclear Information System (INIS)

Schneider, S.L.; Sonnier, C.S.

1987-01-01

The Modular Integrated Video System (MIVS) is being developed for the International Atomic Energy Agency (IAEA) for use in facilities where mains power is available and the separation of the Camera and Recording Control Unit is desirable. The system is being developed under the US Program for Technical Assistance to the IAEA Safeguards (POTAS). The MIVS is designed to be a user-friendly system, allowing operation with minimal effort and training. The system software, through the use of a Liquid Crystal Display (LCD) and four soft keys, leads the inspector through the setup procedures to accomplish the intended surveillance or maintenance task. Review of surveillance data is accomplished with the use of a Portable Review Station. This Review Station will aid the inspector in the review process and determine the number of missed video scenes during a surveillance period

Improved embedded non-linear processing of video for camera surveillance

NARCIS (Netherlands)

Cvetkovic, S.D.; With, de P.H.N.

2009-01-01

For a real time imaging in surveillance applications, image fidelity is of primary importance to ensure customer confidence. The fidelity is obtained amongst others via dynamic range expansion and video signal enhancement. The dynamic range of the signal needs adaptation, because the sensor signal

Low-latency video transmission over high-speed WPANs based on low-power video compression

DEFF Research Database (Denmark)

Belyaev, Evgeny; Turlikov, Andrey; Ukhanova, Ann

2010-01-01

This paper presents latency-constrained video transmission over high-speed wireless personal area networks (WPANs). Low-power video compression is proposed as an alternative to uncompressed video transmission. A video source rate control based on MINMAX quality criteria is introduced. Practical...

Video Self-Modeling

Science.gov (United States)

Buggey, Tom; Ogle, Lindsey

2012-01-01

Video self-modeling (VSM) first appeared on the psychology and education stage in the early 1970s. The practical applications of VSM were limited by lack of access to tools for editing video, which is necessary for almost all self-modeling videos. Thus, VSM remained in the research domain until the advent of camcorders and VCR/DVD players and,…

Video dosimetry: evaluation of X-radiation dose by video fluoroscopic image

International Nuclear Information System (INIS)

Nova, Joao Luiz Leocadio da; Lopes, Ricardo Tadeu

1996-01-01

A new methodology to evaluate the entrance surface dose on patients under radiodiagnosis is presented. A phantom is used in video fluoroscopic procedures in on line video signal system. The images are obtained from a Siemens Polymat 50 and are digitalized. The results show that the entrance surface dose can be obtained in real time from video imaging

Akademisk video

DEFF Research Database (Denmark)

Frølunde, Lisbeth

2017-01-01

Dette kapitel har fokus på metodiske problemstillinger, der opstår i forhold til at bruge (digital) video i forbindelse med forskningskommunikation, ikke mindst online. Video har længe været benyttet i forskningen til dataindsamling og forskningskommunikation. Med digitaliseringen og internettet ...

Science on TeacherTube: A Mixed Methods Analysis of Teacher Produced Video

Science.gov (United States)

Chmiel, Margaret (Marjee)

Increased bandwidth, inexpensive video cameras and easy-to-use video editing software have made social media sites featuring user generated video (UGV) an increasingly popular vehicle for online communication. As such, UGV have come to play a role in education, both formal and informal, but there has been little research on this topic in scholarly literature. In this mixed-methods study, a content and discourse analysis are used to describe the most successful UGV in the science channel of an education-focused site called TeacherTube. The analysis finds that state achievement tests, and their focus on vocabulary and recall-level knowledge, drive much of the content found on TeacherTube.

VBR video traffic models

CERN Document Server

Tanwir, Savera

2014-01-01

There has been a phenomenal growth in video applications over the past few years. An accurate traffic model of Variable Bit Rate (VBR) video is necessary for performance evaluation of a network design and for generating synthetic traffic that can be used for benchmarking a network. A large number of models for VBR video traffic have been proposed in the literature for different types of video in the past 20 years. Here, the authors have classified and surveyed these models and have also evaluated the models for H.264 AVC and MVC encoded video and discussed their findings.

Video Games as a Multifaceted Medium: A Review of Quantitative Social Science Research on Video Games and a Typology of Video Game Research Approaches

Directory of Open Access Journals (Sweden)

James D. Ivory

2013-01-01

Full Text Available Although there is a vast and useful body of quantitative social science research dealing with the social role and impact of video games, it is difficult to compare studies dealing with various dimensions of video games because they are informed by different perspectives and assumptions, employ different methodologies, and address different problems. Studies focusing on different social dimensions of video games can produce varied findings about games’ social function that are often difficult to reconcile— or even contradictory. Research is also often categorized by topic area, rendering a comprehensive view of video games’ social role across topic areas difficult. This interpretive review presents a novel typology of four identified approaches that categorize much of the quantitative social science video game research conducted to date: “video games as stimulus,” “video games as avocation,” “video games as skill,” and “video games as social environment.” This typology is useful because it provides an organizational structure within which the large and growing number of studies on video games can be categorized, guiding comparisons between studies on different research topics and aiding a more comprehensive understanding of video games’ social role. Categorizing the different approaches to video game research provides a useful heuristic for those critiquing and expanding that research, as well as an understandable entry point for scholars new to video game research. Further, and perhaps more importantly, the typology indicates when topics should be explored using different approaches than usual to shed new light on the topic areas. Lastly, the typology exposes the conceptual disconnects between the different approaches to video game research, allowing researchers to consider new ways to bridge gaps between the different approaches’ strengths and limitations with novel methods.

Piloting the feasibility of head-mounted video technology to augment student feedback during simulated clinical decision-making: An observational design pilot study.

Science.gov (United States)

Forbes, Helen; Bucknall, Tracey K; Hutchinson, Alison M

2016-04-01

Clinical decision-making is a complex activity that is critical to patient safety. Simulation, augmented by feedback, affords learners the opportunity to learn critical clinical decision-making skills. More detailed feedback following simulation exercises has the potential to further enhance student learning, particularly in relation to developing improved clinical decision-making skills. To investigate the feasibility of head-mounted video camera recordings, to augment feedback, following acute patient deterioration simulations. Pilot study using an observational design. Ten final-year nursing students participated in three simulation exercises, each focussed on detection and management of patient deterioration. Two observers collected behavioural data using an adapted version of Gaba's Clinical Simulation Tool, to provide verbal feedback to each participant, following each simulation exercise. Participants wore a head-mounted video camera during the second simulation exercise only. Video recordings were replayed to participants to augment feedback, following the second simulation exercise. Data were collected on: participant performance (observed and perceived); participant perceptions of feedback methods; and head-mounted video camera recording feasibility and capability for detailed audio-visual feedback. Management of patient deterioration improved for six participants (60%). Increased perceptions of confidence (70%) and competence (80%), were reported by the majority of participants. Few participants (20%) agreed that the video recording specifically enhanced their learning. The visual field of the head-mounted video camera was not always synchronised with the participant's field of vision, thus affecting the usefulness of some recordings. The usefulness of the video recordings, to enhance verbal feedback to participants on detection and management of simulated patient deterioration, was inconclusive. Modification of the video camera glasses, to improve

Video Enhancement and Dynamic Range Control of HDR Sequences for Automotive Applications

Directory of Open Access Journals (Sweden)

Giovanni Ramponi

2007-01-01

Full Text Available CMOS video cameras with high dynamic range (HDR output are particularly suitable for driving assistance applications, where lighting conditions can strongly vary, going from direct sunlight to dark areas in tunnels. However, common visualization devices can only handle a low dynamic range, and thus a dynamic range reduction is needed. Many algorithms have been proposed in the literature to reduce the dynamic range of still pictures. Anyway, extending the available methods to video is not straightforward, due to the peculiar nature of video data. We propose an algorithm for both reducing the dynamic range of video sequences and enhancing its appearance, thus improving visual quality and reducing temporal artifacts. We also provide an optimized version of our algorithm for a viable hardware implementation on an FPGA. The feasibility of this implementation is demonstrated by means of a case study.

Digital Video in Research

DEFF Research Database (Denmark)

Frølunde, Lisbeth

2012-01-01

Is video becoming “the new black” in academia, if so, what are the challenges? The integration of video in research methodology (for collection, analysis) is well-known, but the use of “academic video” for dissemination is relatively new (Eriksson and Sørensen). The focus of this paper is academic......). In the video, I appear (along with other researchers) and two Danish film directors, and excerpts from their film. My challenges included how to edit the academic video and organize the collaborative effort. I consider video editing as a semiotic, transformative process of “reassembling” voices....... In the discussion, I review academic video in terms of relevance and implications for research practice. The theoretical background is social constructivist, combining social semiotics (Kress, van Leeuwen, McCloud), visual anthropology (Banks, Pink) and dialogic theory (Bakhtin). The Bakhtinian notion of “voices...

Technology survey on video face tracking

Science.gov (United States)

Zhang, Tong; Gomes, Herman Martins

2014-03-01

With the pervasiveness of monitoring cameras installed in public areas, schools, hospitals, work places and homes, video analytics technologies for interpreting these video contents are becoming increasingly relevant to people's lives. Among such technologies, human face detection and tracking (and face identification in many cases) are particularly useful in various application scenarios. While plenty of research has been conducted on face tracking and many promising approaches have been proposed, there are still significant challenges in recognizing and tracking people in videos with uncontrolled capturing conditions, largely due to pose and illumination variations, as well as occlusions and cluttered background. It is especially complex to track and identify multiple people simultaneously in real time due to the large amount of computation involved. In this paper, we present a survey on literature and software that are published or developed during recent years on the face tracking topic. The survey covers the following topics: 1) mainstream and state-of-the-art face tracking methods, including features used to model the targets and metrics used for tracking; 2) face identification and face clustering from face sequences; and 3) software packages or demonstrations that are available for algorithm development or trial. A number of publically available databases for face tracking are also introduced.

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... search for current job openings visit HHS USAJobs Home >> NEI YouTube Videos >> NEI YouTube Videos: Amblyopia Listen NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia Animations Blindness Cataract ...

Talking Video in 'Everyday Life'

DEFF Research Database (Denmark)

McIlvenny, Paul

For better or worse, video technologies have made their way into many domains of social life, for example in the domain of therapeutics. Techniques such as Marte Meo, Video Interaction Guidance (ViG), Video-Enhanced Reflection on Communication, Video Home Training and Video intervention....../prevention (VIP) all promote the use of video as a therapeutic tool. This paper focuses on media therapeutics and the various in situ uses of video technologies in the mass media for therapeutic purposes. Reality TV parenting programmes such as Supernanny, Little Angels, The House of Tiny Tearaways, Honey, We...... observation and instruction (directives) relayed across different spaces; 2) the use of recorded video by participants to visualise, spatialise and localise talk and action that is distant in time and/or space; 3) the translating, stretching and cutting of social experience in and through the situated use...

Video Classification and Adaptive QoP/QoS Control for Multiresolution Video Applications on IPTV

Directory of Open Access Journals (Sweden)

Huang Shyh-Fang

2012-01-01

Full Text Available With the development of heterogeneous networks and video coding standards, multiresolution video applications over networks become important. It is critical to ensure the service quality of the network for time-sensitive video services. Worldwide Interoperability for Microwave Access (WIMAX is a good candidate for delivering video signals because through WIMAX the delivery quality based on the quality-of-service (QoS setting can be guaranteed. The selection of suitable QoS parameters is, however, not trivial for service users. Instead, what a video service user really concerns with is the video quality of presentation (QoP which includes the video resolution, the fidelity, and the frame rate. In this paper, we present a quality control mechanism in multiresolution video coding structures over WIMAX networks and also investigate the relationship between QoP and QoS in end-to-end connections. Consequently, the video presentation quality can be simply mapped to the network requirements by a mapping table, and then the end-to-end QoS is achieved. We performed experiments with multiresolution MPEG coding over WIMAX networks. In addition to the QoP parameters, the video characteristics, such as, the picture activity and the video mobility, also affect the QoS significantly.

Video capture virtual reality as a flexible and effective rehabilitation tool

Directory of Open Access Journals (Sweden)

Katz Noomi

2004-12-01

Full Text Available Abstract Video capture virtual reality (VR uses a video camera and software to track movement in a single plane without the need to place markers on specific bodily locations. The user's image is thereby embedded within a simulated environment such that it is possible to interact with animated graphics in a completely natural manner. Although this technology first became available more than 25 years ago, it is only within the past five years that it has been applied in rehabilitation. The objective of this article is to describe the way this technology works, to review its assets relative to other VR platforms, and to provide an overview of some of the major studies that have evaluated the use of video capture technologies for rehabilitation.

A real-time remote video streaming platform for ultrasound imaging.

Science.gov (United States)

Ahmadi, Mehdi; Gross, Warren J; Kadoury, Samuel

2016-08-01

Ultrasound is a viable imaging technology in remote and resources-limited areas. Ultrasonography is a user-dependent skill which depends on a high degree of training and hands-on experience. However, there is a limited number of skillful sonographers located in remote areas. In this work, we aim to develop a real-time video streaming platform which allows specialist physicians to remotely monitor ultrasound exams. To this end, an ultrasound stream is captured and transmitted through a wireless network into remote computers, smart-phones and tablets. In addition, the system is equipped with a camera to track the position of the ultrasound probe. The main advantage of our work is using an open source platform for video streaming which gives us more control over streaming parameters than the available commercial products. The transmission delays of the system are evaluated for several ultrasound video resolutions and the results show that ultrasound videos close to the high-definition (HD) resolution can be received and displayed on an Android tablet with the delay of 0.5 seconds which is acceptable for accurate real-time diagnosis.

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... search for current job openings visit HHS USAJobs Home » NEI YouTube Videos » NEI YouTube Videos: Amblyopia Listen NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia Animations Blindness Cataract ...

Preliminary condensation pool experiments with steam using DN80 and DN100 blowdown pipes[VIDEO CAMERAS

Energy Technology Data Exchange (ETDEWEB)

Laine, J.; Puustinen, M. [Lappeenranta University of Technology (Finland)

2004-03-01

The report summarizes the results of the preliminary steam blowdown experiments. Altogether eight experiment series, each consisting of several steam blows, were carried out in autumn 2003 with a scaled-down condensation pool test rig designed and constructed at Lappeenranta University of Technology. The main purpose of the experiments was to evaluate the capabilities of the test rig and the needs for measurement and visualization devices. The experiments showed that a high-speed video camera is essential for visual observation due to the rapid condensation of steam bubbles. Furthermore, the maximum measurement frequency of the current combination of instrumentation and data acquisition system is inadequate for the actual steam tests in 2004. (au)

A lateral chromatic aberration correction system for ultrahigh-definition color video camera

Science.gov (United States)

Yamashita, Takayuki; Shimamoto, Hiroshi; Funatsu, Ryohei; Mitani, Kohji; Nojiri, Yuji

2006-02-01

We have developed color camera for an 8k x 4k-pixel ultrahigh-definition video system, which is called Super Hi- Vision, with a 5x zoom lens and a signal-processing system incorporating a function for real-time lateral chromatic aberration correction. The chromatic aberration of the lens degrades color image resolution. So in order to develop a compact zoom lens consistent with ultrahigh-resolution characteristics, we incorporated a real-time correction function in the signal-processing system. The signal-processing system has eight memory tables to store the correction data at eight focal length points on the blue and red channels. When the focal length data is inputted from the lens control units, the relevant correction data are interpolated from two of eights correction data tables. This system performs geometrical conversion on both channels using this correction data. This paper describes that the correction function can successfully reduce the lateral chromatic aberration, to an amount small enough to ensure the desired image resolution was achieved over the entire range of the lens in real time.

Airborne Video Surveillance

National Research Council Canada - National Science Library

Blask, Steven

2002-01-01

The DARPA Airborne Video Surveillance (AVS) program was established to develop and promote technologies to make airborne video more useful, providing capabilities that achieve a UAV force multiplier...

Reflections on academic video

Directory of Open Access Journals (Sweden)

Thommy Eriksson

2012-11-01

Full Text Available As academics we study, research and teach audiovisual media, yet rarely disseminate and mediate through it. Today, developments in production technologies have enabled academic researchers to create videos and mediate audiovisually. In academia it is taken for granted that everyone can write a text. Is it now time to assume that everyone can make a video essay? Using the online journal of academic videos Audiovisual Thinking and the videos published in it as a case study, this article seeks to reflect on the emergence and legacy of academic audiovisual dissemination. Anchoring academic video and audiovisual dissemination of knowledge in two critical traditions, documentary theory and semiotics, we will argue that academic video is in fact already present in a variety of academic disciplines, and that academic audiovisual essays are bringing trends and developments that have long been part of academic discourse to their logical conclusion.

Informal Physics Learning from Video Games: A Case Study Using Gameplay Videos

Science.gov (United States)

Croxton, DeVaughn; Kortemeyer, Gerd

2018-01-01

Researching informal gameplay can be challenging, since as soon as a formal study design is imposed, it becomes neither casual nor self-motivated. As a case study of a non-invasive design, we analyze publicly posted gameplay videos to assess the effectiveness of a physics educational video game on special relativity. These videos offer unique…

Video Recording With a GoPro in Hand and Upper Extremity Surgery.

Science.gov (United States)

Vara, Alexander D; Wu, John; Shin, Alexander Y; Sobol, Gregory; Wiater, Brett

2016-10-01

Video recordings of surgical procedures are an excellent tool for presentations, analyzing self-performance, illustrating publications, and educating surgeons and patients. Recording the surgeon's perspective with high-resolution video in the operating room or clinic has become readily available and advances in software improve the ease of editing these videos. A GoPro HERO 4 Silver or Black was mounted on a head strap and worn over the surgical scrub cap, above the loupes of the operating surgeon. Five live surgical cases were recorded with the camera. The videos were uploaded to a computer and subsequently edited with iMovie or the GoPro software. The optimal settings for both the Silver and Black editions, when operating room lights are used, were determined to be a narrow view, 1080p, 60 frames per second (fps), spot meter on, protune on with auto white balance, exposure compensation at -0.5, and without a polarizing lens. When the operating room lights were not used, it was determined that the standard settings for a GoPro camera were ideal for positioning and editing (4K, 15 frames per second, spot meter and protune off). The GoPro HERO 4 provides high-quality, the surgeon perspective, and a cost-effective video recording of upper extremity surgical procedures. Challenges include finding the optimal settings for each surgical procedure and the length of recording due to battery life limitations. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

A new video programme

CERN Multimedia

CERN video productions

2011-01-01

"What's new @ CERN?", a new monthly video programme, will be broadcast on the Monday of every month on webcast.cern.ch. Aimed at the general public, the programme will cover the latest CERN news, with guests and explanatory features. Tune in on Monday 3 October at 4 pm (CET) to see the programme in English, and then at 4:20 pm (CET) for the French version.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-posterframe-640x360-at-10-percent.jpg', '1383406', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-0600-kbps-maxH-360-25-fps-...

Data Management Rubric for Video Data in Organismal Biology.

Science.gov (United States)

Brainerd, Elizabeth L; Blob, Richard W; Hedrick, Tyson L; Creamer, Andrew T; Müller, Ulrike K

2017-07-01

Standards-based data management facilitates data preservation, discoverability, and access for effective data reuse within research groups and across communities of researchers. Data sharing requires community consensus on standards for data management, such as storage and formats for digital data preservation, metadata (i.e., contextual data about the data) that should be recorded and stored, and data access. Video imaging is a valuable tool for measuring time-varying phenotypes in organismal biology, with particular application for research in functional morphology, comparative biomechanics, and animal behavior. The raw data are the videos, but videos alone are not sufficient for scientific analysis. Nearly endless videos of animals can be found on YouTube and elsewhere on the web, but these videos have little value for scientific analysis because essential metadata such as true frame rate, spatial calibration, genus and species, weight, age, etc. of organisms, are generally unknown. We have embarked on a project to build community consensus on video data management and metadata standards for organismal biology research. We collected input from colleagues at early stages, organized an open workshop, "Establishing Standards for Video Data Management," at the Society for Integrative and Comparative Biology meeting in January 2017, and then collected two more rounds of input on revised versions of the standards. The result we present here is a rubric consisting of nine standards for video data management, with three levels within each standard: good, better, and best practices. The nine standards are: (1) data storage; (2) video file formats; (3) metadata linkage; (4) video data and metadata access; (5) contact information and acceptable use; (6) camera settings; (7) organism(s); (8) recording conditions; and (9) subject matter/topic. The first four standards address data preservation and interoperability for sharing, whereas standards 5-9 establish minimum metadata

Self-Recognition in Live Videos by Young Children: Does Video Training Help?

Science.gov (United States)

Demir, Defne; Skouteris, Helen

2010-01-01

The overall aim of the experiment reported here was to establish whether self-recognition in live video can be facilitated when live video training is provided to children aged 2-2.5 years. While the majority of children failed the test of live self-recognition prior to video training, more than half exhibited live self-recognition post video…

A review of video security training and assessment-systems and their applications

International Nuclear Information System (INIS)

Cellucci, J.; Hall, R.J.

1991-01-01

This paper reports that during the last 10 years computer-aided video data collection and playback systems have been used as nuclear facility security training and assessment tools with varying degrees of success. These mobile systems have been used by trained security personnel for response force training, vulnerability assessment, force-on-force exercises and crisis management. Typically, synchronous recordings from multiple video cameras, communications audio, and digital sensor inputs; are played back to the exercise participants and then edited for training and briefing. Factors that have influence user acceptance include: frequency of use, the demands placed on security personnel, fear of punishment, user training requirements and equipment cost. The introduction of S-VHS video and new software for scenario planning, video editing and data reduction; should bring about a wider range of security applications and supply the opportunity for significant cost sharing with other user groups

A Framework for Video Modeling

NARCIS (Netherlands)

Petkovic, M.; Jonker, Willem

In recent years, research in video databases has increased greatly, but relatively little work has been done in the area of semantic content-based retrieval. In this paper, we present a framework for video modelling with emphasis on semantic content of video data. The video data model presented

Advanced methods for image registration applied to JET videos

Energy Technology Data Exchange (ETDEWEB)

Craciunescu, Teddy, E-mail: teddy.craciunescu@jet.uk [EURATOM-MEdC Association, NILPRP, Bucharest (Romania); Murari, Andrea [Consorzio RFX, Associazione EURATOM-ENEA per la Fusione, Padova (Italy); Gelfusa, Michela [Associazione EURATOM-ENEA – University of Rome “Tor Vergata”, Roma (Italy); Tiseanu, Ion; Zoita, Vasile [EURATOM-MEdC Association, NILPRP, Bucharest (Romania); Arnoux, Gilles [EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom)

2015-10-15

Graphical abstract: - Highlights: • Development of an image registration method for JET IR and fast visible cameras. • Method based on SIFT descriptors and coherent point drift points set registration technique. • Method able to deal with extremely noisy images and very low luminosity images. • Computation time compatible with the inter-shot analysis. - Abstract: The last years have witnessed a significant increase in the use of digital cameras on JET. They are routinely applied for imaging in the IR and visible spectral regions. One of the main technical difficulties in interpreting the data of camera based diagnostics is the presence of movements of the field of view. Small movements occur due to machine shaking during normal pulses while large ones may arise during disruptions. Some cameras show a correlation of image movement with change of magnetic field strength. For deriving unaltered information from the videos and for allowing correct interpretation an image registration method, based on highly distinctive scale invariant feature transform (SIFT) descriptors and on the coherent point drift (CPD) points set registration technique, has been developed. The algorithm incorporates a complex procedure for rejecting outliers. The method has been applied for vibrations correction to videos collected by the JET wide angle infrared camera and for the correction of spurious rotations in the case of the JET fast visible camera (which is equipped with an image intensifier). The method has proved to be able to deal with the images provided by this camera frequently characterized by low contrast and a high level of blurring and noise.

Video library for video imaging detection at intersection stop lines.

Science.gov (United States)

2010-04-01

The objective of this activity was to record video that could be used for controlled : evaluation of video image vehicle detection system (VIVDS) products and software upgrades to : existing products based on a list of conditions that might be diffic...

Comparison of cardiopulmonary resuscitation techniques using video camera recordings.

OpenAIRE

Mann, C J; Heyworth, J

1996-01-01

OBJECTIVE--To use video recordings to compare the performance of resuscitation teams in relation to their previous training in cardiac resuscitation. METHODS--Over a 10 month period all cardiopulmonary resuscitations carried out in an accident and emergency (A&E) resuscitation room were videotaped. The following variables were monitored: (1) time to perform three defibrillatory shocks; (2) time to give intravenous adrenaline (centrally or peripherally); (3) the numbers and grade of medical an...

Satellite markers: a simple method for ground truth car pose on stereo video

Science.gov (United States)

Gil, Gustavo; Savino, Giovanni; Piantini, Simone; Pierini, Marco

2018-04-01

Artificial prediction of future location of other cars in the context of advanced safety systems is a must. The remote estimation of car pose and particularly its heading angle is key to predict its future location. Stereo vision systems allow to get the 3D information of a scene. Ground truth in this specific context is associated with referential information about the depth, shape and orientation of the objects present in the traffic scene. Creating 3D ground truth is a measurement and data fusion task associated with the combination of different kinds of sensors. The novelty of this paper is the method to generate ground truth car pose only from video data. When the method is applied to stereo video, it also provides the extrinsic camera parameters for each camera at frame level which are key to quantify the performance of a stereo vision system when it is moving because the system is subjected to undesired vibrations and/or leaning. We developed a video post-processing technique which employs a common camera calibration tool for the 3D ground truth generation. In our case study, we focus in accurate car heading angle estimation of a moving car under realistic imagery. As outcomes, our satellite marker method provides accurate car pose at frame level, and the instantaneous spatial orientation for each camera at frame level.

The Children's Video Marketplace.

Science.gov (United States)

Ducey, Richard V.

This report examines a growing submarket, the children's video marketplace, which comprises broadcast, cable, and video programming for children 2 to 11 years old. A description of the tremendous growth in the availability and distribution of children's programming is presented, the economics of the children's video marketplace are briefly…

Toward enhancing the distributed video coder under a multiview video codec framework

Science.gov (United States)

Lee, Shih-Chieh; Chen, Jiann-Jone; Tsai, Yao-Hong; Chen, Chin-Hua

2016-11-01

The advance of video coding technology enables multiview video (MVV) or three-dimensional television (3-D TV) display for users with or without glasses. For mobile devices or wireless applications, a distributed video coder (DVC) can be utilized to shift the encoder complexity to decoder under the MVV coding framework, denoted as multiview distributed video coding (MDVC). We proposed to exploit both inter- and intraview video correlations to enhance side information (SI) and improve the MDVC performance: (1) based on the multiview motion estimation (MVME) framework, a categorized block matching prediction with fidelity weights (COMPETE) was proposed to yield a high quality SI frame for better DVC reconstructed images. (2) The block transform coefficient properties, i.e., DCs and ACs, were exploited to design the priority rate control for the turbo code, such that the DVC decoding can be carried out with fewest parity bits. In comparison, the proposed COMPETE method demonstrated lower time complexity, while presenting better reconstructed video quality. Simulations show that the proposed COMPETE can reduce the time complexity of MVME to 1.29 to 2.56 times smaller, as compared to previous hybrid MVME methods, while the image peak signal to noise ratios (PSNRs) of a decoded video can be improved 0.2 to 3.5 dB, as compared to H.264/AVC intracoding.

stil113_0401r -- Point coverage of locations of still frames extracted from video imagery which depict sediment types

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... Amaurosis Low Vision Refractive Errors Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: Amblyopia NEI Home Contact Us A-Z Site Map NEI on Social Media Information in Spanish (Información en español) Website, ...

Time-Lapse Videos for Physics Education: Specific Examples

Science.gov (United States)

Vollmer, Michael; Möllmann, Klaus-Peter

2018-01-01

There are many physics experiments with long time scales such that they are usually neither shown in the physics class room nor in student labs. However, they can be easily recorded with time-lapse cameras and the respective time-lapse videos allow qualitative and/or quantitative analysis of the underlying physics. Here, we present some examples…

The energy expenditure of an activity-promoting video game compared to sedentary video games and TV watching.

Science.gov (United States)

Mitre, Naim; Foster, Randal C; Lanningham-Foster, Lorraine; Levine, James A

2011-01-01

In the present study we investigated the effect of television watching and the use of activity-promoting video games on energy expenditure in obese and lean children. Energy expenditure and physical activity were measured while participants were watching television, playing a video game on a traditional sedentary video game console, and while playing the same video game on an activity-promoting video game console. Energy expenditure was significantly greater than television watching and playing video games on a sedentary video game console when children played the video game on the activity-promoting console. When examining movement with accelerometry, children moved significantly more when playing the video game on the Nintendo Wii console. Activity-promoting video games have shown to increase movement, and be an important tool to raise energy expenditure by 50% when compared to sedentary activities of daily living.

Fast compressed domain motion detection in H.264 video streams for video surveillance applications

DEFF Research Database (Denmark)

Szczerba, Krzysztof; Forchhammer, Søren; Støttrup-Andersen, Jesper

2009-01-01

This paper presents a novel approach to fast motion detection in H.264/MPEG-4 advanced video coding (AVC) compressed video streams for IP video surveillance systems. The goal is to develop algorithms which may be useful in a real-life industrial perspective by facilitating the processing of large...... on motion vectors embedded in the video stream without requiring a full decoding and reconstruction of video frames. To improve the robustness to noise, a confidence measure based on temporal and spatial clues is introduced to increase the probability of correct detection. The algorithm was tested on indoor...

Sound for digital video

CERN Document Server

Holman, Tomlinson

2013-01-01

Achieve professional quality sound on a limited budget! Harness all new, Hollywood style audio techniques to bring your independent film and video productions to the next level.In Sound for Digital Video, Second Edition industry experts Tomlinson Holman and Arthur Baum give you the tools and knowledge to apply recent advances in audio capture, video recording, editing workflow, and mixing to your own film or video with stunning results. This fresh edition is chockfull of techniques, tricks, and workflow secrets that you can apply to your own projects from preproduction

Experimental video signals distribution MMF network based on IEEE 802.11 standard

Science.gov (United States)

Kowalczyk, Marcin; Maksymiuk, Lukasz; Siuzdak, Jerzy

2014-11-01

The article was focused on presentation the achievements in a scope of experimental research on transmission of digital video streams in the frame of specially realized for this purpose ROF (Radio over Fiber) network. Its construction was based on the merge of wireless IEEE 802.11 network, popularly referred as Wi-Fi, with a passive optical network PON based on multimode fibers MMF. The proposed approach can constitute interesting proposal in area of solutions in the scope of the systems monitoring extensive, within which is required covering of a large area with ensuring of a relatively high degree of immunity on the interferences transmitted signals from video IP cameras to the monitoring center and a high configuration flexibility (easily change the deployment of cameras) of such network.

Gamifying Video Object Segmentation.

Science.gov (United States)

Spampinato, Concetto; Palazzo, Simone; Giordano, Daniela

2017-10-01

Video object segmentation can be considered as one of the most challenging computer vision problems. Indeed, so far, no existing solution is able to effectively deal with the peculiarities of real-world videos, especially in cases of articulated motion and object occlusions; limitations that appear more evident when we compare the performance of automated methods with the human one. However, manually segmenting objects in videos is largely impractical as it requires a lot of time and concentration. To address this problem, in this paper we propose an interactive video object segmentation method, which exploits, on one hand, the capability of humans to identify correctly objects in visual scenes, and on the other hand, the collective human brainpower to solve challenging and large-scale tasks. In particular, our method relies on a game with a purpose to collect human inputs on object locations, followed by an accurate segmentation phase achieved by optimizing an energy function encoding spatial and temporal constraints between object regions as well as human-provided location priors. Performance analysis carried out on complex video benchmarks, and exploiting data provided by over 60 users, demonstrated that our method shows a better trade-off between annotation times and segmentation accuracy than interactive video annotation and automated video object segmentation approaches.

A blinded assessment of video quality in wearable technology for telementoring in open surgery: the Google Glass experience.

Science.gov (United States)

Hashimoto, Daniel A; Phitayakorn, Roy; Fernandez-del Castillo, Carlos; Meireles, Ozanan

2016-01-01

The goal of telementoring is to recreate face-to-face encounters with a digital presence. Open-surgery telementoring is limited by lack of surgeon's point-of-view cameras. Google Glass is a wearable computer that looks like a pair of glasses but is equipped with wireless connectivity, a camera, and viewing screen for video conferencing. This study aimed to assess the safety of using Google Glass by assessing the video quality of a telementoring session. Thirty-four (n = 34) surgeons at a single institution were surveyed and blindly compared via video captured with Google Glass versus an Apple iPhone 5 during the open cholecystectomy portion of a Whipple. Surgeons were asked to evaluate the quality of the video and its adequacy for safe use in telementoring. Thirty-four of 107 invited surgical attendings (32%) responded to the anonymous survey. A total of 50% rated the Google Glass video as fair with the other 50% rating it as bad to poor. A total of 52.9% of respondents rated the Apple iPhone video as good. A significantly greater proportion of respondents felt Google Glass video quality was inadequate for telementoring versus the Apple iPhone's (82.4 vs 26.5%, p safe telementoring. As the device is still in initial phases of development, future iterations or competitor devices may provide a better telementoring application for wearable devices.

An Automatic Video Meteor Observation Using UFO Capture at the Showa Station

Science.gov (United States)

Fujiwara, Y.; Nakamura, T.; Ejiri, M.; Suzuki, H.

2012-05-01

The goal of our study is to clarify meteor activities in the southern hemi-sphere by continuous optical observations with video cameras with automatic meteor detection and recording at Syowa station, Antarctica.

Real-Time FPGA-Based Object Tracker with Automatic Pan-Tilt Features for Smart Video Surveillance Systems

Directory of Open Access Journals (Sweden)

Sanjay Singh

2017-05-01

Full Text Available The design of smart video surveillance systems is an active research field among the computer vision community because of their ability to perform automatic scene analysis by selecting and tracking the objects of interest. In this paper, we present the design and implementation of an FPGA-based standalone working prototype system for real-time tracking of an object of interest in live video streams for such systems. In addition to real-time tracking of the object of interest, the implemented system is also capable of providing purposive automatic camera movement (pan-tilt in the direction determined by movement of the tracked object. The complete system, including camera interface, DDR2 external memory interface controller, designed object tracking VLSI architecture, camera movement controller and display interface, has been implemented on the Xilinx ML510 (Virtex-5 FX130T FPGA Board. Our proposed, designed and implemented system robustly tracks the target object present in the scene in real time for standard PAL (720 × 576 resolution color video and automatically controls camera movement in the direction determined by the movement of the tracked object.

SIRSALE: integrated video database management tools

Science.gov (United States)

Brunie, Lionel; Favory, Loic; Gelas, J. P.; Lefevre, Laurent; Mostefaoui, Ahmed; Nait-Abdesselam, F.

2002-07-01

Video databases became an active field of research during the last decade. The main objective in such systems is to provide users with capabilities to friendly search, access and playback distributed stored video data in the same way as they do for traditional distributed databases. Hence, such systems need to deal with hard issues : (a) video documents generate huge volumes of data and are time sensitive (streams must be delivered at a specific bitrate), (b) contents of video data are very hard to be automatically extracted and need to be humanly annotated. To cope with these issues, many approaches have been proposed in the literature including data models, query languages, video indexing etc. In this paper, we present SIRSALE : a set of video databases management tools that allow users to manipulate video documents and streams stored in large distributed repositories. All the proposed tools are based on generic models that can be customized for specific applications using ad-hoc adaptation modules. More precisely, SIRSALE allows users to : (a) browse video documents by structures (sequences, scenes, shots) and (b) query the video database content by using a graphical tool, adapted to the nature of the target video documents. This paper also presents an annotating interface which allows archivists to describe the content of video documents. All these tools are coupled to a video player integrating remote VCR functionalities and are based on active network technology. So, we present how dedicated active services allow an optimized video transport for video streams (with Tamanoir active nodes). We then describe experiments of using SIRSALE on an archive of news video and soccer matches. The system has been demonstrated to professionals with a positive feedback. Finally, we discuss open issues and present some perspectives.

Multiple Feature Fusion Based on Co-Training Approach and Time Regularization for Place Classification in Wearable Video

Directory of Open Access Journals (Sweden)

Vladislavs Dovgalecs

2013-01-01

Full Text Available The analysis of video acquired with a wearable camera is a challenge that multimedia community is facing with the proliferation of such sensors in various applications. In this paper, we focus on the problem of automatic visual place recognition in a weakly constrained environment, targeting the indexing of video streams by topological place recognition. We propose to combine several machine learning approaches in a time regularized framework for image-based place recognition indoors. The framework combines the power of multiple visual cues and integrates the temporal continuity information of video. We extend it with computationally efficient semisupervised method leveraging unlabeled video sequences for an improved indexing performance. The proposed approach was applied on challenging video corpora. Experiments on a public and a real-world video sequence databases show the gain brought by the different stages of the method.

Medical video server construction.

Science.gov (United States)

Dańda, Jacek; Juszkiewicz, Krzysztof; Leszczuk, Mikołaj; Loziak, Krzysztof; Papir, Zdzisław; Sikora, Marek; Watza, Rafal

2003-01-01

The paper discusses two implementation options for a Digital Video Library, a repository used for archiving, accessing, and browsing of video medical records. Two crucial issues to be decided on are a video compression format and a video streaming platform. The paper presents numerous decision factors that have to be taken into account. The compression formats being compared are DICOM as a format representative for medical applications, both MPEGs, and several new formats targeted for an IP networking. The comparison includes transmission rates supported, compression rates, and at least options for controlling a compression process. The second part of the paper presents the ISDN technique as a solution for provisioning of tele-consultation services between medical parties that are accessing resources uploaded to a digital video library. There are several backbone techniques (like corporate LANs/WANs, leased lines or even radio/satellite links) available, however, the availability of network resources for hospitals was the prevailing choice criterion pointing to ISDN solutions. Another way to provide access to the Digital Video Library is based on radio frequency domain solutions. The paper describes possibilities of both, wireless and cellular network's data transmission service to be used as a medical video server transport layer. For the cellular net-work based solution two communication techniques are used: Circuit Switched Data and Packet Switched Data.

Image processing of integrated video image obtained with a charged-particle imaging video monitor system

International Nuclear Information System (INIS)

Iida, Takao; Nakajima, Takehiro

1988-01-01

A new type of charged-particle imaging video monitor system was constructed for video imaging of the distributions of alpha-emitting and low-energy beta-emitting nuclides. The system can display not only the scintillation image due to radiation on the video monitor but also the integrated video image becoming gradually clearer on another video monitor. The distortion of the image is about 5% and the spatial resolution is about 2 line pairs (lp)mm -1 . The integrated image is transferred to a personal computer and image processing is performed qualitatively and quantitatively. (author)

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: Amblyopia ... *PDF files require the free Adobe® Reader® software for viewing. This website is maintained by the ...

Smart Streaming for Online Video Services

OpenAIRE

Chen, Liang; Zhou, Yipeng; Chiu, Dah Ming

2013-01-01

Bandwidth consumption is a significant concern for online video service providers. Practical video streaming systems usually use some form of HTTP streaming (progressive download) to let users download the video at a faster rate than the video bitrate. Since users may quit before viewing the complete video, however, much of the downloaded video will be "wasted". To the extent that users' departure behavior can be predicted, we develop smart streaming that can be used to improve user QoE with ...

Video outside versus video inside the web: do media setting and image size have an impact on the emotion-evoking potential of video?

NARCIS (Netherlands)

Verleur, R.; Verhagen, Pleunes Willem; Crawford, Margaret; Simonson, Michael; Lamboy, Carmen

2001-01-01

To explore the educational potential of video-evoked affective responses in a Web-based environment, the question was raised whether video in a Web-based environment is experienced differently from video in a traditional context. An experiment was conducted that studied the affect-evoking power of

Video games: good, bad, or other?

Science.gov (United States)

Prot, Sara; McDonald, Katelyn A; Anderson, Craig A; Gentile, Douglas A

2012-06-01

Video games are a pervasive pastime among children and adolescents. The growing popularity of video games has instigated a debate among parents, researchers, video game producers, and policymakers concerning potential harmful and helpful effects of video games on children. This article provides an overview of research findings on the positive and negative effects of video games, thus providing an empirical answer to the question, are video games good or bad? The article also provides some guidelines to help pediatricians, parents, and other caregivers protect children from negative effects and to maximize positive effects of video games. Copyright © 2012 Elsevier Inc. All rights reserved.

Blind prediction of natural video quality.

Science.gov (United States)

Saad, Michele A; Bovik, Alan C; Charrier, Christophe

2014-03-01

We propose a blind (no reference or NR) video quality evaluation model that is nondistortion specific. The approach relies on a spatio-temporal model of video scenes in the discrete cosine transform domain, and on a model that characterizes the type of motion occurring in the scenes, to predict video quality. We use the models to define video statistics and perceptual features that are the basis of a video quality assessment (VQA) algorithm that does not require the presence of a pristine video to compare against in order to predict a perceptual quality score. The contributions of this paper are threefold. 1) We propose a spatio-temporal natural scene statistics (NSS) model for videos. 2) We propose a motion model that quantifies motion coherency in video scenes. 3) We show that the proposed NSS and motion coherency models are appropriate for quality assessment of videos, and we utilize them to design a blind VQA algorithm that correlates highly with human judgments of quality. The proposed algorithm, called video BLIINDS, is tested on the LIVE VQA database and on the EPFL-PoliMi video database and shown to perform close to the level of top performing reduced and full reference VQA algorithms.

Hydrogen peroxide plasma sterilization of a waterproof, high-definition video camera case for intraoperative imaging in veterinary surgery.

Science.gov (United States)

Adin, Christopher A; Royal, Kenneth D; Moore, Brandon; Jacob, Megan

2018-06-13

To evaluate the safety and usability of a wearable, waterproof high-definition camera/case for acquisition of surgical images by sterile personnel. An in vitro study to test the efficacy of biodecontamination of camera cases. Usability for intraoperative image acquisition was assessed in clinical procedures. Two waterproof GoPro Hero4 Silver camera cases were inoculated by immersion in media containing Staphylococcus pseudointermedius or Escherichia coli at ≥5.50E+07 colony forming units/mL. Cases were biodecontaminated by manual washing and hydrogen peroxide plasma sterilization. Cultures were obtained by swab and by immersion in enrichment broth before and after each contamination/decontamination cycle (n = 4). The cameras were then applied by a surgeon in clinical procedures by using either a headband or handheld mode and were assessed for usability according to 5 user characteristics. Cultures of all poststerilization swabs were negative. One of 8 cultures was positive in enrichment broth, consistent with a low level of contamination in 1 sample. Usability of the camera was considered poor in headband mode, with limited battery life, inability to control camera functions, and lack of zoom function affecting image quality. Handheld operation of the camera by the primary surgeon improved usability, allowing close-up still and video intraoperative image acquisition. Vaporized hydrogen peroxide sterilization of this camera case was considered effective for biodecontamination. Handheld operation improved usability for intraoperative image acquisition. Vaporized hydrogen peroxide sterilization and thorough manual washing of a waterproof camera may provide cost effective intraoperative image acquisition for documentation purposes. © 2018 The American College of Veterinary Surgeons.

Hierarchical event selection for video storyboards with a case study on snooker video visualization.

Science.gov (United States)

Parry, Matthew L; Legg, Philip A; Chung, David H S; Griffiths, Iwan W; Chen, Min

2011-12-01

Video storyboard, which is a form of video visualization, summarizes the major events in a video using illustrative visualization. There are three main technical challenges in creating a video storyboard, (a) event classification, (b) event selection and (c) event illustration. Among these challenges, (a) is highly application-dependent and requires a significant amount of application specific semantics to be encoded in a system or manually specified by users. This paper focuses on challenges (b) and (c). In particular, we present a framework for hierarchical event representation, and an importance-based selection algorithm for supporting the creation of a video storyboard from a video. We consider the storyboard to be an event summarization for the whole video, whilst each individual illustration on the board is also an event summarization but for a smaller time window. We utilized a 3D visualization template for depicting and annotating events in illustrations. To demonstrate the concepts and algorithms developed, we use Snooker video visualization as a case study, because it has a concrete and agreeable set of semantic definitions for events and can make use of existing techniques of event detection and 3D reconstruction in a reliable manner. Nevertheless, most of our concepts and algorithms developed for challenges (b) and (c) can be applied to other application areas. © 2010 IEEE

A System based on Adaptive Background Subtraction Approach for Moving Object Detection and Tracking in Videos

Directory of Open Access Journals (Sweden)

Bahadır KARASULU

2013-04-01

Full Text Available Video surveillance systems are based on video and image processing research areas in the scope of computer science. Video processing covers various methods which are used to browse the changes in existing scene for specific video. Nowadays, video processing is one of the important areas of computer science. Two-dimensional videos are used to apply various segmentation and object detection and tracking processes which exists in multimedia content-based indexing, information retrieval, visual and distributed cross-camera surveillance systems, people tracking, traffic tracking and similar applications. Background subtraction (BS approach is a frequently used method for moving object detection and tracking. In the literature, there exist similar methods for this issue. In this research study, it is proposed to provide a more efficient method which is an addition to existing methods. According to model which is produced by using adaptive background subtraction (ABS, an object detection and tracking system’s software is implemented in computer environment. The performance of developed system is tested via experimental works with related video datasets. The experimental results and discussion are given in the study

Rheumatoid Arthritis Educational Video Series

Medline Plus

Full Text Available ... Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... member of our patient care team. Managing Your Arthritis Managing Your Arthritis Managing Chronic Pain and Depression ...

Rheumatoid Arthritis Educational Video Series

Science.gov (United States)

... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

Video game addiction: The push to pathologize video games

DEFF Research Database (Denmark)

Nielsen, Rune Kristian Lundedal; Ferguson, Christopher; Bean, Anthony

2017-01-01

With proposals to include “gaming disorder” in both the Diagnostic and Statistical Manual (DSM) and International Compendium of Diseases (ICD), the concept of video game addiction has gained traction. However, many aspects of this concept remain controversial. At present, little clarity has been...... achieved regarding diagnostic criteria and appropriate symptoms. It is unclear if symptoms that involve problematic video gaming behavior should be reified as a new disorder, or are the expression of underlying mental conditions. Nonetheless, the recent proposals around gaming disorder from respected...... and necessity of the overarching construct. This raises multiple concerns. First, the current approaches to understanding “gaming addiction” are rooted in substance abuse research and approaches do not necessarily translate to media consumption. Second, some research has indicated that “video game addiction...

Multimodal Feature Learning for Video Captioning

Directory of Open Access Journals (Sweden)

Sujin Lee

2018-01-01

Full Text Available Video captioning refers to the task of generating a natural language sentence that explains the content of the input video clips. This study proposes a deep neural network model for effective video captioning. Apart from visual features, the proposed model learns additionally semantic features that describe the video content effectively. In our model, visual features of the input video are extracted using convolutional neural networks such as C3D and ResNet, while semantic features are obtained using recurrent neural networks such as LSTM. In addition, our model includes an attention-based caption generation network to generate the correct natural language captions based on the multimodal video feature sequences. Various experiments, conducted with the two large benchmark datasets, Microsoft Video Description (MSVD and Microsoft Research Video-to-Text (MSR-VTT, demonstrate the performance of the proposed model.

Video game use and cognitive performance: does it vary with the presence of problematic video game use?

Science.gov (United States)

Collins, Emily; Freeman, Jonathan

2014-03-01

Action video game players have been found to outperform nonplayers on a variety of cognitive tasks. However, several failures to replicate these video game player advantages have indicated that this relationship may not be straightforward. Moreover, despite the discovery that problematic video game players do not appear to demonstrate the same superior performance as nonproblematic video game players in relation to multiple object tracking paradigms, this has not been investigated for other tasks. Consequently, this study compared gamers and nongamers in task switching ability, visual short-term memory, mental rotation, enumeration, and flanker interference, as well as investigated the influence of self-reported problematic video game use. A total of 66 participants completed the experiment, 26 of whom played action video games, including 20 problematic players. The results revealed no significant effect of playing action video games, nor any influence of problematic video game play. This indicates that the previously reported cognitive advantages in video game players may be restricted to specific task features or samples. Furthermore, problematic video game play may not have a detrimental effect on cognitive performance, although this is difficult to ascertain considering the lack of video game player advantage. More research is therefore sorely needed.

Video frame processor

International Nuclear Information System (INIS)

Joshi, V.M.; Agashe, Alok; Bairi, B.R.

1993-01-01

This report provides technical description regarding the Video Frame Processor (VFP) developed at Bhabha Atomic Research Centre. The instrument provides capture of video images available in CCIR format. Two memory planes each with a capacity of 512 x 512 x 8 bit data enable storage of two video image frames. The stored image can be processed on-line and on-line image subtraction can also be carried out for image comparisons. The VFP is a PC Add-on board and is I/O mapped within the host IBM PC/AT compatible computer. (author). 9 refs., 4 figs., 19 photographs

Reduction in Fall Rate in Dementia Managed Care Through Video Incident Review: Pilot Study.

Science.gov (United States)

Bayen, Eleonore; Jacquemot, Julien; Netscher, George; Agrawal, Pulkit; Tabb Noyce, Lynn; Bayen, Alexandre

2017-10-17

Falls of individuals with dementia are frequent, dangerous, and costly. Early detection and access to the history of a fall is crucial for efficient care and secondary prevention in cognitively impaired individuals. However, most falls remain unwitnessed events. Furthermore, understanding why and how a fall occurred is a challenge. Video capture and secure transmission of real-world falls thus stands as a promising assistive tool. The objective of this study was to analyze how continuous video monitoring and review of falls of individuals with dementia can support better quality of care. A pilot observational study (July-September 2016) was carried out in a Californian memory care facility. Falls were video-captured (24×7), thanks to 43 wall-mounted cameras (deployed in all common areas and in 10 out of 40 private bedrooms of consenting residents and families). Video review was provided to facility staff, thanks to a customized mobile device app. The outcome measures were the count of residents' falls happening in the video-covered areas, the acceptability of video recording, the analysis of video review, and video replay possibilities for care practice. Over 3 months, 16 falls were video-captured. A drop in fall rate was observed in the last month of the study. Acceptability was good. Video review enabled screening for the severity of falls and fall-related injuries. Video replay enabled identifying cognitive-behavioral deficiencies and environmental circumstances contributing to the fall. This allowed for secondary prevention in high-risk multi-faller individuals and for updated facility care policies regarding a safer living environment for all residents. Video monitoring offers high potential to support conventional care in memory care facilities. ©Eleonore Bayen, Julien Jacquemot, George Netscher, Pulkit Agrawal, Lynn Tabb Noyce, Alexandre Bayen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 17.10.2017.

Visual Analytics and Storytelling through Video

Energy Technology Data Exchange (ETDEWEB)

Wong, Pak C.; Perrine, Kenneth A.; Mackey, Patrick S.; Foote, Harlan P.; Thomas, Jim

2005-10-31

This paper supplements a video clip submitted to the Video Track of IEEE Symposium on Information Visualization 2005. The original video submission applies a two-way storytelling approach to demonstrate the visual analytics capabilities of a new visualization technique. The paper presents our video production philosophy, describes the plot of the video, explains the rationale behind the plot, and finally, shares our production experiences with our readers.

SU-C-18A-02: Image-Based Camera Tracking: Towards Registration of Endoscopic Video to CT

International Nuclear Information System (INIS)

Ingram, S; Rao, A; Wendt, R; Castillo, R; Court, L; Yang, J; Beadle, B

2014-01-01

Purpose: Endoscopic examinations are routinely performed on head and neck and esophageal cancer patients. However, these images are underutilized for radiation therapy because there is currently no way to register them to a CT of the patient. The purpose of this work is to develop a method to track the motion of an endoscope within a structure using images from standard clinical equipment. This method will be incorporated into a broader endoscopy/CT registration framework. Methods: We developed a software algorithm to track the motion of an endoscope within an arbitrary structure. We computed frame-to-frame rotation and translation of the camera by tracking surface points across the video sequence and utilizing two-camera epipolar geometry. The resulting 3D camera path was used to recover the surrounding structure via triangulation methods. We tested this algorithm on a rigid cylindrical phantom with a pattern spray-painted on the inside. We did not constrain the motion of the endoscope while recording, and we did not constrain our measurements using the known structure of the phantom. Results: Our software algorithm can successfully track the general motion of the endoscope as it moves through the phantom. However, our preliminary data do not show a high degree of accuracy in the triangulation of 3D point locations. More rigorous data will be presented at the annual meeting. Conclusion: Image-based camera tracking is a promising method for endoscopy/CT image registration, and it requires only standard clinical equipment. It is one of two major components needed to achieve endoscopy/CT registration, the second of which is tying the camera path to absolute patient geometry. In addition to this second component, future work will focus on validating our camera tracking algorithm in the presence of clinical imaging features such as patient motion, erratic camera motion, and dynamic scene illumination

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... questions Clinical Studies Publications Catalog Photos and Images Spanish Language Information Grants and Funding Extramural Research Division ... Low Vision Refractive Errors Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video ...

Interactive Video, The Next Step

Science.gov (United States)

Strong, L. R.; Wold-Brennon, R.; Cooper, S. K.; Brinkhuis, D.

2012-12-01

Video has the ingredients to reach us emotionally - with amazing images, enthusiastic interviews, music, and video game-like animations-- and it's emotion that motivates us to learn more about our new interest. However, watching video is usually passive. New web-based technology is expanding and enhancing the video experience, creating opportunities to use video with more direct interaction. This talk will look at an Educaton and Outreach team's experience producing video-centric curriculum using innovative interactive media tools from TED-Ed and FlixMaster. The Consortium for Ocean Leadership's Deep Earth Academy has partnered with the Center for Dark Energy Biosphere Investigations (C-DEBI) to send educators and a video producer aboard three deep sea research expeditions to the Juan de Fuca plate to install and service sub-seafloor observatories. This collaboration between teachers, students, scientists and media producers has proved a productive confluence, providing new ways of understanding both ground-breaking science and the process of science itself - by experimenting with new ways to use multimedia during ocean-going expeditions and developing curriculum and other projects post-cruise.

Real-time video quality monitoring

Science.gov (United States)

Liu, Tao; Narvekar, Niranjan; Wang, Beibei; Ding, Ran; Zou, Dekun; Cash, Glenn; Bhagavathy, Sitaram; Bloom, Jeffrey

2011-12-01

The ITU-T Recommendation G.1070 is a standardized opinion model for video telephony applications that uses video bitrate, frame rate, and packet-loss rate to measure the video quality. However, this model was original designed as an offline quality planning tool. It cannot be directly used for quality monitoring since the above three input parameters are not readily available within a network or at the decoder. And there is a great room for the performance improvement of this quality metric. In this article, we present a real-time video quality monitoring solution based on this Recommendation. We first propose a scheme to efficiently estimate the three parameters from video bitstreams, so that it can be used as a real-time video quality monitoring tool. Furthermore, an enhanced algorithm based on the G.1070 model that provides more accurate quality prediction is proposed. Finally, to use this metric in real-world applications, we present an example emerging application of real-time quality measurement to the management of transmitted videos, especially those delivered to mobile devices.

Collaborative Video Search Combining Video Retrieval with Human-Based Visual Inspection

NARCIS (Netherlands)

Hudelist, M.A.; Cobârzan, C.; Beecks, C.; van de Werken, Rob; Kletz, S.; Hürst, W.O.; Schoeffmann, K.

2016-01-01

We propose a novel video browsing approach that aims at optimally integrating traditional, machine-based retrieval methods with an interface design optimized for human browsing performance. Advanced video retrieval and filtering (e.g., via color and motion signatures, and visual concepts) on a

76 FR 55585 - Video Description: Implementation of the Twenty-First Century Communications and Video...

Science.gov (United States)

2011-09-08

... of Video Programming Report and Order (15 F.C.C.R. 15,230 (2000)), recon. granted in part and denied... dialogue, makes video programming more accessible to individuals who are blind or visually impaired. The... networks, and multichannel video programming distributor systems (``MVPDs'') with more than 50,000...

Perceptual video quality assessment in H.264 video coding standard using objective modeling.

Science.gov (United States)

Karthikeyan, Ramasamy; Sainarayanan, Gopalakrishnan; Deepa, Subramaniam Nachimuthu

2014-01-01

Since usage of digital video is wide spread nowadays, quality considerations have become essential, and industry demand for video quality measurement is rising. This proposal provides a method of perceptual quality assessment in H.264 standard encoder using objective modeling. For this purpose, quality impairments are calculated and a model is developed to compute the perceptual video quality metric based on no reference method. Because of the shuttle difference between the original video and the encoded video the quality of the encoded picture gets degraded, this quality difference is introduced by the encoding process like Intra and Inter prediction. The proposed model takes into account of the artifacts introduced by these spatial and temporal activities in the hybrid block based coding methods and an objective modeling of these artifacts into subjective quality estimation is proposed. The proposed model calculates the objective quality metric using subjective impairments; blockiness, blur and jerkiness compared to the existing bitrate only calculation defined in the ITU G 1070 model. The accuracy of the proposed perceptual video quality metrics is compared against popular full reference objective methods as defined by VQEG.

Comparison of the Effects of Continuous Video Modeling, Video Prompting, and Video Modeling on Task Completion by Young Adults with Moderate Intellectual Disability

Science.gov (United States)

Mechling, Linda C.; Ayres, Kevin M.; Bryant, Kathryn J.; Foster, Ashley L.

2014-01-01

This study compared the effects of three procedures (video prompting: VP, video modeling: VM, and continuous video modeling: CVM) on task completion by three high school students with moderate intellectual disability. The comparison was made across three sets of fundamentally different tasks (putting away household items in clusters of two items;…

Flexible Human Behavior Analysis Framework for Video Surveillance Applications

Directory of Open Access Journals (Sweden)

Weilun Lao

2010-01-01

Full Text Available We study a flexible framework for semantic analysis of human motion from surveillance video. Successful trajectory estimation and human-body modeling facilitate the semantic analysis of human activities in video sequences. Although human motion is widely investigated, we have extended such research in three aspects. By adding a second camera, not only more reliable behavior analysis is possible, but it also enables to map the ongoing scene events onto a 3D setting to facilitate further semantic analysis. The second contribution is the introduction of a 3D reconstruction scheme for scene understanding. Thirdly, we perform a fast scheme to detect different body parts and generate a fitting skeleton model, without using the explicit assumption of upright body posture. The extension of multiple-view fusion improves the event-based semantic analysis by 15%–30%. Our proposed framework proves its effectiveness as it achieves a near real-time performance (13–15 frames/second and 6–8 frames/second for monocular and two-view video sequences.

Rheumatoid Arthritis Educational Video Series

Medline Plus

Full Text Available ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

Improved people detection in nuclear plants by video processing for safety purpose

Energy Technology Data Exchange (ETDEWEB)

Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A.; Carvalho, Paulo Victor R., E-mail: calexandre@ien.gov.br, E-mail: mol@ien.gov.br, E-mail: paulov@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Seixas, Jose M.; Silva, Eduardo Antonio B., E-mail: seixas@lps.ufrj.br, E-mail: eduardo@smt.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Eletrica; Waintraub, Fabio, E-mail: fabiowaintraub@hotmail.com [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politecnica. Departamento de Engenharia Eletronica e de Computacao

2013-07-01

This work describes improvements in a surveillance system for safety purposes in nuclear plants. The objective is to track people online in video, in order to estimate the dose received by personnel, during working tasks executed in nuclear plants. The estimation will be based on their tracked positions and on dose rate mapping in a nuclear research reactor, Argonauta. Cameras have been installed within Argonauta room, supplying the data needed. Video processing methods were combined for detecting and tracking people in video. More specifically, segmentation, performed by background subtraction, was combined with a tracking method based on color distribution. The use of both methods improved the overall results. An alternative approach was also evaluated, by means of blind source signal separation. Results are commented, along with perspectives. (author)

Improved people detection in nuclear plants by video processing for safety purpose

International Nuclear Information System (INIS)

Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A.; Carvalho, Paulo Victor R.; Seixas, Jose M.; Silva, Eduardo Antonio B.; Waintraub, Fabio

2013-01-01

This work describes improvements in a surveillance system for safety purposes in nuclear plants. The objective is to track people online in video, in order to estimate the dose received by personnel, during working tasks executed in nuclear plants. The estimation will be based on their tracked positions and on dose rate mapping in a nuclear research reactor, Argonauta. Cameras have been installed within Argonauta room, supplying the data needed. Video processing methods were combined for detecting and tracking people in video. More specifically, segmentation, performed by background subtraction, was combined with a tracking method based on color distribution. The use of both methods improved the overall results. An alternative approach was also evaluated, by means of blind source signal separation. Results are commented, along with perspectives. (author)

Social video content delivery

CERN Document Server

Wang, Zhi; Zhu, Wenwu

2016-01-01

This brief presents new architecture and strategies for distribution of social video content. A primary framework for socially-aware video delivery and a thorough overview of the possible approaches is provided. The book identifies the unique characteristics of socially-aware video access and social content propagation, revealing the design and integration of individual modules that are aimed at enhancing user experience in the social network context. The change in video content generation, propagation, and consumption for online social networks, has significantly challenged the traditional video delivery paradigm. Given the massive amount of user-generated content shared in online social networks, users are now engaged as active participants in the social ecosystem rather than as passive receivers of media content. This revolution is being driven further by the deep penetration of 3G/4G wireless networks and smart mobile devices that are seamlessly integrated with online social networking and media-sharing s...

A generic flexible and robust approach for intelligent real-time video-surveillance systems

Science.gov (United States)

Desurmont, Xavier; Delaigle, Jean-Francois; Bastide, Arnaud; Macq, Benoit

2004-05-01

In this article we present a generic, flexible and robust approach for an intelligent real-time video-surveillance system. A previous version of the system was presented in [1]. The goal of these advanced tools is to provide help to operators by detecting events of interest in visual scenes and highlighting alarms and compute statistics. The proposed system is a multi-camera platform able to handle different standards of video inputs (composite, IP, IEEE1394 ) and which can basically compress (MPEG4), store and display them. This platform also integrates advanced video analysis tools, such as motion detection, segmentation, tracking and interpretation. The design of the architecture is optimised to playback, display, and process video flows in an efficient way for video-surveillance application. The implementation is distributed on a scalable computer cluster based on Linux and IP network. It relies on POSIX threads for multitasking scheduling. Data flows are transmitted between the different modules using multicast technology and under control of a TCP-based command network (e.g. for bandwidth occupation control). We report here some results and we show the potential use of such a flexible system in third generation video surveillance system. We illustrate the interest of the system in a real case study, which is the indoor surveillance.

Children's Video Games as Interactive Racialization

OpenAIRE

Martin, Cathlena

2008-01-01

Cathlena Martin explores in her paper "Children's Video Games as Interactive Racialization" selected children's video games. Martin argues that children's video games often act as reinforcement for the games' television and film counterparts and their racializing characteristics and features. In Martin's analysis the video games discussed represent media through which to analyze racial identities and ideologies. In making the case for positive female minority leads in children's video games, ...

The use of video in educational research and teacher training in the digital classroom

Directory of Open Access Journals (Sweden)

Falcinelli Floriana

2016-06-01

Full Text Available The introduction of new technologies, video in particular, in educational and pedagogical research has not only changed how research is conducted in the educational field but has also brought about significant changes in teacher training. The advent of digitalisation, along with the miniaturisation of both video cameras and storage media, has led to a dramatic increase in the use of video, particularly in terms of video production. This has led to the introduction of new teaching practices and new training initiatives derived from the analysis of these practices. The use of video, at an educational and didactic level on the one hand, and as an instrument for field observation on the other, offers a variety of benefits, along with some critical issues. One of the advantages is the capacity to allow for an analytical vision of complex actions, which may be reviewed at different times, by a variety of interlocutors. The aim of this study is to present a reflection based on research conducted in nine digital classes, focussing on the use of video as both an instrument for recording, collecting and analysing data, as well as a training tool in the didactic practice of teachers.

Subjective Video Quality Assessment in H.264/AVC Video Coding Standard

Directory of Open Access Journals (Sweden)

Z. Miličević

2012-11-01

Full Text Available This paper seeks to provide an approach for subjective video quality assessment in the H.264/AVC standard. For this purpose a special software program for the subjective assessment of quality of all the tested video sequences is developed. It was developed in accordance with recommendation ITU-T P.910, since it is suitable for the testing of multimedia applications. The obtained results show that in the proposed selective intra prediction and optimized inter prediction algorithm there is a small difference in picture quality (signal-to-noise ratio between decoded original and modified video sequences.

Illusory control, gambling, and video gaming: an investigation of regular gamblers and video game players.

Science.gov (United States)

King, Daniel L; Ejova, Anastasia; Delfabbro, Paul H

2012-09-01

There is a paucity of empirical research examining the possible association between gambling and video game play. In two studies, we examined the association between video game playing, erroneous gambling cognitions, and risky gambling behaviour. One hundred and fifteen participants, including 65 electronic gambling machine (EGM) players and 50 regular video game players, were administered a questionnaire that examined video game play, gambling involvement, problem gambling, and beliefs about gambling. We then assessed each groups' performance on a computerised gambling task that involved real money. A post-game survey examined perceptions of the skill and chance involved in the gambling task. The results showed that video game playing itself was not significantly associated with gambling involvement or problem gambling status. However, among those persons who both gambled and played video games, video game playing was uniquely and significantly positively associated with the perception of direct control over chance-based gambling events. Further research is needed to better understand the nature of this association, as it may assist in understanding the impact of emerging digital gambling technologies.

Lights, Camera, Action: Advancing Learning, Research, and Program Evaluation through Video Production in Educational Leadership Preparation

Science.gov (United States)

Friend, Jennifer; Militello, Matthew

2015-01-01

This article analyzes specific uses of digital video production in the field of educational leadership preparation, advancing a three-part framework that includes the use of video in (a) teaching and learning, (b) research methods, and (c) program evaluation and service to the profession. The first category within the framework examines videos…

still115_0403-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

Video-Based Big Data Analytics in Cyberlearning

Science.gov (United States)

Wang, Shuangbao; Kelly, William

2017-01-01

In this paper, we present a novel system, inVideo, for video data analytics, and its use in transforming linear videos into interactive learning objects. InVideo is able to analyze video content automatically without the need for initial viewing by a human. Using a highly efficient video indexing engine we developed, the system is able to analyze…

Web Audio/Video Streaming Tool

Science.gov (United States)

Guruvadoo, Eranna K.

2003-01-01

In order to promote NASA-wide educational outreach program to educate and inform the public of space exploration, NASA, at Kennedy Space Center, is seeking efficient ways to add more contents to the web by streaming audio/video files. This project proposes a high level overview of a framework for the creation, management, and scheduling of audio/video assets over the web. To support short-term goals, the prototype of a web-based tool is designed and demonstrated to automate the process of streaming audio/video files. The tool provides web-enabled users interfaces to manage video assets, create publishable schedules of video assets for streaming, and schedule the streaming events. These operations are performed on user-defined and system-derived metadata of audio/video assets stored in a relational database while the assets reside on separate repository. The prototype tool is designed using ColdFusion 5.0.

Robust video object cosegmentation.

Science.gov (United States)