WorldWideScience

Sample records for viable design approach

  1. Cybernetically sound organizational structures II: Relating de Sitter's design theory to Beer's viable system model

    NARCIS (Netherlands)

    Achterbergh, J.M.I.M.; Vriens, D.J.

    2011-01-01

    - Purpose – The purpose of this paper is to show how the viable system model (VSM) and de Sitter's design theory can complement each other in the context of the diagnosis and design of viable organizations. - Design/methodology/approach – Key concepts from Beer's model and de Sitter's design theory

  2. Zero based programming: a viable security budgeting approach.

    Science.gov (United States)

    Roll, Frederick G

    2003-01-01

    To get additional dollars or avoid budget cuts or personnel reductions, healthcare security directors should consider a budget approach that best justifies the needs of the department or organization.

  3. Designing viable cropping options for salt-affected lands

    Science.gov (United States)

    Shabala, Sergey; Meinke, Holger

    2017-04-01

    Salinity cost agricultural sector over 27Bln pa in lost opportunities and is an issue that crosses all spatial and temporal scales - from individual fields, farms, catchments, landscapes to national and global levels. Salinity manifests itself in many forms and often leads to further soil degradation such as erosion, nutrient and soil organic matter depletion, and a loss of (soil) biodiversity. Salinity may also cause major disturbance to ecosystems due to its impact on resources (e.g. pollution of aquifers). In extreme cases it can turn previously highly productive areas into wastelands. An increasing global population and unprecedented urban sprawls are now putting additional pressures on our soil and water resources, particularly in regions where urbanisation directly competes with agriculture for access to land and water. And although everyone agrees that avoiding soil salinity in the first instance would be the most effective way of combating it, reality is that the amount of saline land and water resources is rapidly increasing, and will continue to increase, especially in developing countries. Purposefully designing our cropping systems that can cope with various levels of salinity could be one answer to this increasing problem. In this work we review some of the key cropping options that can be deployed to either avoid, reduce or remediate salt-affected lands. We argue that for these measures to be most effective an ongoing science - policy - society dialogue is required to ensure that policy frameworks that govern land and water management are conducive to reducing salinity or even assist in restoring affected areas. We first consider several case studies highlighting the extent of the problem using ongoing salinity hotspots around the globe. We then look at halophytes as a possible biological tools to remediate already saline sols, and discuss prospects of mixed (halophytes and glycophytes) cropping solutions for various agricultural systems at different

  4. Enabling Strategy Formulation by ICT: A Viable Systems Approach

    NARCIS (Netherlands)

    Vriens, D.J.; Achterbergh, J.M.I.M.; Vriens, D.J.

    2003-01-01

    In this chapter the role of ICT for competitive intelligence is approached from the perspective of strategy formulation. The authors hold the view that competitive intelligence can be seen as knowledge necessary for the process of strategy formulation. To determine the role of ICT, it is proposed to

  5. Non-attainment policy: A viable approach for groundwater remediation

    International Nuclear Information System (INIS)

    Javandel, I.

    1995-01-01

    The National Research Council recently completed a three-year study entitled open-quotes Alternatives for Groundwater Cleanupclose quotes. One of the conclusions of this study indicated that for sites with a complex geologic and hydrologic set up, existing technologies may not be able to restore contaminated aquifers to health-based standards. Therefore, the most logical approach in these cases, perhaps, could be to adopt the open-quotes non-attainment zoneclose quotes policy. The essence of this policy is to first contain the plume and stop any further migration of contaminated groundwater, and then to remove the source of contamination. This paper briefly discusses some of the problems encountered with this approach for a contaminated area at the US Department of Energy's Lawrence Berkely National Laboratory

  6. Slurry pipeline design approach

    Energy Technology Data Exchange (ETDEWEB)

    Betinol, Roy; Navarro R, Luis [Brass Chile S.A., Santiago (Chile)

    2009-12-19

    Compared to other engineering technologies, the design of a commercial long distance Slurry Pipeline design is a relatively new engineering concept which gained more recognition in the mid 1960 's. Slurry pipeline was first introduced to reduce cost in transporting coal to power generating units. Since then this technology has caught-up worldwide to transport other minerals such as limestone, copper, zinc and iron. In South America, the use of pipeline is commonly practiced in the transport of Copper (Chile, Peru and Argentina), Iron (Chile and Brazil), Zinc (Peru) and Bauxite (Brazil). As more mining operations expand and new mine facilities are opened, the design of the long distance slurry pipeline will continuously present a commercially viable option. The intent of this paper is to present the design process and discuss any new techniques and approach used today to ensure a better, safer and economical slurry pipeline. (author)

  7. Sustainability and the Viable Systems Approach: Opportunities and Issues for the Governance of the Territory

    Directory of Open Access Journals (Sweden)

    Sergio Barile

    2018-03-01

    Full Text Available The aim of this paper is to propose an approach for representing the territory as a dynamic system of intersubjective relationships that is able to guarantee not only the efficiency of the processes within organizations, but also effective results in the general context and a sustainable impact on the broader environment. This contribution is developed on the basis of the viable systems approach (vSa, which is intended as a theoretical framework for the analysis of social phenomena as well as for orienting government processes. Using this theoretical framework, the proposed approach leads to the representation of the territory as a viable system that is capable of surviving in its own context by creating value for the other entities of the context (public groups of governments, communities, investors, natural environment, future generations, non-human species, thus defining the essential conditions for a sustainable equilibrium. The consideration that social phenomena have to be analyzed by taking into account the different relations and interactions that orient the behavior of individuals and, as a consequence, their main collective manifestations, i.e., organizations, underlines the importance of shifting from a traditional reductionist approach to a systemic approach. In what follows, taking a cue from the definition of sustainability that implies a wider sharing, we provide some initial critical positions, and finally shape the useful elements that can be preparatory to the introduction of a working hypothesis that is capable of delineating a possible itinerary for the development of the territory.

  8. Novel Approach for Enterocutaneous Fistula Treatment with the Use of Viable Cryopreserved Placental Membrane

    Directory of Open Access Journals (Sweden)

    Frederick Nichols

    2016-01-01

    Full Text Available Enterocutaneous fistulas (ECF are a difficult and costly surgical complication to manage. The standard treatment of nil per os (NPO and total paraenteral nutrition (TPN is not well tolerated by patients. TPN is also known for complications associated with long term central venous catheterization and for high cost of prolonged hospital stay. We present two low output ECF cases successfully treated with viable cryopreserved placental membrane (vCPM placed into the fistula tracts. One patient is a 59-year-old male with a low output ECF from a jejunostomy tube site four weeks after the surgery. The second patient is an 87-year-old male with a low output ECF following a small bowel resection secondary to a strangulated inguinal hernia. He was evaluated on day 41 after surgery. NPO and TPN for several weeks did not resolute the ECF. The fistulae were closed postoperatively in both patients with zero output on the same day after one vCPM application. On day 3 postoperatively both patients were started on clear liquid diets and subsequently advanced to regular diets. The ECF have remained resolved for over 2 months. The use of vCPM is a novel promising approach for treatment of ECF.

  9. Teaching Writing within the Disciplines: A Viable Approach for English for Academic Purposes (EAP) Instructors

    Science.gov (United States)

    Leopold, Lisa

    2011-01-01

    This case study of an adjunct-model English for Academic Purposes (EAP) writing course linked to a policy-analysis course describes an effective approach for putting "specificity" into practice in EAP curriculum design. The rationale for interdisciplinary collaboration, the positive learning outcomes from the EAP writing course, the…

  10. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    Science.gov (United States)

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

  11. Salt repository design approach

    International Nuclear Information System (INIS)

    Matthews, S.C.

    1983-01-01

    This paper presents a summary discussion of the approaches that have been and will be taken in design of repository facilities for use with disposal of radioactive wastes in salt formations. Since specific sites have yet to be identified, the discussion is at a general level, supplemented with illustrative examples where appropriate. 5 references, 1 figure

  12. A viable on-chip FPGA configuration memory scrubbing approach for CBM-ToF

    Energy Technology Data Exchange (ETDEWEB)

    Oancea, Andrei-Dumitru; Stuellein, Christian; Manz, Sebastian; Gebelein, Jano; Kebschull, Udo [Infrastruktur und Rechnersysteme in der Informationsverarbeitung (IRI), Goethe-Universitaet, Senckenberganlage 31, 60325 Frankfurt am Main (Germany); Collaboration: CBM-Collaboration

    2015-07-01

    The ToF Detector of the CBM Experiment will be equipped with FPGA-based read-out boards (ROBs). These ROBs will be operated in a radiation environment, and therefore need a mitigation mechanism against soft errors in the SRAM-based configuration memories of the FPGAs. The proposed approach combines intrinsic on-chip single upset correction with extrinsic selective frame scrubbing for multiple-bit upsets. The slow control is realized using the GBT-SCA, which is capable of handling interrupts. This enables the new approach of event-driven configuration frame correction. While conventional blind scrubbing leads to a continuous load on the control path, the selective frame scrubbing reduces this load to a minimum. For verification purposes, radiation tests with a proton beam were performed at COSY, Juelich. The occurred soft errors were classified into single and multiple- bit upsets, enabling an estimation of the rate at which extrinsic intervention is necessary.

  13. From Viability to Sustainability: The Contribution of the Viable Systems Approach (VSA

    Directory of Open Access Journals (Sweden)

    Vincenzo Formisano

    2018-03-01

    Full Text Available The current dynamics of business systems require new ways of conceiving the role of single entities. On this basis, a complex of interactions between the company and the reference context must be activated to guarantee survival dynamics. From these considerations re-emerge the ideas of Peccei (2013 and King (2013 that recognise in the systemic thought the foundations for a sustainable society. The present study derives from these considerations, and aims at contributing to the advancement of the knowledge necessary to overcome the challenges in the sustainability field. The methodological approach, albeit heuristic, can be traced back to the positive scientific and constructivist method. The results of the study showed the prevalence of qualitative and subjective techniques, accompanied by the so-called inductive method, testifying to the intense interaction between the scholar and the object investigated. With regard to future research, it would be interesting to construct a flexible, scalable and extensible model to recover both a database and an ontology for the theoretical framework.

  14. Networked remote area dental services: a viable, sustainable approach to oral health care in challenging environments.

    Science.gov (United States)

    Dyson, Kate; Kruger, Estie; Tennant, Marc

    2012-12-01

    This study examines the cost effectiveness of a model of remote area oral health service. Retrospective financial analysis. Rural and remote primary health services. Clinical activity data and associated cost data relating to the provision of a networked visiting oral health service by the Centre for Rural and Remote Oral Health formed the basis of the study data frameset. The cost-effectiveness of the Centre's model of service provision at five rural and remote sites in Western Australia during the calendar years 2006, 2008 and 2010 was examined in the study. Calculations of the service provision costs and value of care provided were made using data records and the Fee Schedule of Dental Services for Dentists. The ratio of service provision costs to the value of care provided was determined for each site and was benchmarked against the equivalent ratios applicable to large scale government sector models of service provision. The use of networked models have been effective in other disciplines but this study is the first to show a networked hub and spoke approach of five spokes to one hub is cost efficient in remote oral health care. By excluding special cost-saving initiatives introduced by the Centre, the study examines easily translatable direct service provision costs against direct clinical care outcomes in some of Australia's most challenging locations. This study finds that networked hub and spoke models of care can be financially efficient arrangements in remote oral health care. © 2012 The Authors. Australian Journal of Rural Health © National Rural Health Alliance Inc.

  15. Chemical clocks, oscillations, and other temporal effects in analytical chemistry: oddity or viable approach?

    Science.gov (United States)

    Prabhu, Gurpur Rakesh D; Witek, Henryk A; Urban, Pawel L

    2018-05-31

    Most analytical methods are based on "analogue" inputs from sensors of light, electric potentials, or currents. The signals obtained by such sensors are processed using certain calibration functions to determine concentrations of the target analytes. The signal readouts are normally done after an optimised and fixed time period, during which an assay mixture is incubated. This minireview covers another-and somewhat unusual-analytical strategy, which relies on the measurement of time interval between the occurrences of two distinguishable states in the assay reaction. These states manifest themselves via abrupt changes in the properties of the assay mixture (e.g. change of colour, appearance or disappearance of luminescence, change in pH, variations in optical activity or mechanical properties). In some cases, a correlation between the time of appearance/disappearance of a given property and the analyte concentration can be also observed. An example of an assay based on time measurement is an oscillating reaction, in which the period of oscillations is linked to the concentration of the target analyte. A number of chemo-chronometric assays, relying on the existing (bio)transformations or artificially designed reactions, were disclosed in the past few years. They are very attractive from the fundamental point of view but-so far-only few of them have be validated and used to address real-world problems. Then, can chemo-chronometric assays become a practical tool for chemical analysis? Is there a need for further development of such assays? We are aiming to answer these questions.

  16. DUAL MODE OFFERING AS VIABLE APPROACH FOR PROMOTION OF HIGHER EDUCATION IN PAKISTAN

    Directory of Open Access Journals (Sweden)

    Irshad HUSSAIN

    2014-07-01

    Full Text Available Pakistan is a developing with 148 universities and degree awarding institutions including public and private sector. The enrolment as given in the National Educational Policy 2009 was up to 5% only. It reflects greater demands of higher/tertiary education and calls for alternative strategic measures for addressing the issue. An innovative approach was necessary to address the issue of access. Therefore, the Islamia University of Bahawalpur –a formal mode university took an innovative initiative to become a dual mode university by establishing an Institute of Distance Education (IDE in 2011. The institute offered along with others, an M.Phill programme in ten disciplines through distance education mode in semester fall 2011. More than eight hundred applications were received by potential learners against 275 seats. However, after test and interview 189 students were enrolled in M.Phill programme in Applied Psychology, Arabic, Education, English, Media Studies, Islamic Studies, Pakistan Studies, History, Persian, and Urdu. In the beginning, the Institute organized an orientation workshop for learners to guide them studying in distance education system. The programme was offered under semester system and the semester was broke up into two halves –mid-term and final term. The respective departments provided learning materials to students whereas the IDE provided instructional booklet. Submission of two assignments was compulsory for the entire semester; one before mid-term and second before final-term workshop/ examination for each of the courses. Similarly, students’ presence in workshops for 24 hours (12 during mid-term and 12 during final-term workshop for one 3-credit hour course was mandatory. Students’ support services were provided through Skype conference, social media and mobile phones. Students necessarily had to give presentations and submit their assignments after checking their similarity index by using turnitin software. At the

  17. Dual Mode Offering As Viable Approach 
For Promotion Of Higher Education In Pakistan

    Directory of Open Access Journals (Sweden)

    Irshad HUSSAIN

    2014-01-01

    Full Text Available Pakistan is a developing with 148 universities and degree awarding institutions including public and private sector. The enrolment as given in the National Educational Policy 2009 was up to 5% only. It reflects greater demands of higher/tertiary education and calls for alternative strategic measures for addressing the issue. An innovative approach was necessary to address the issue of access. Therefore, the Islamia University of Bahawalpur –a formal mode university took an innovative initiative to become a dual mode university by establishing an Institute of Distance Education (IDE in 2011. The institute offered along with others, an M.Phill programme in ten disciplines through distance education mode in semester fall 2011. More than eight hundred applications were received by potential learners against 275 seats. However, after test and interview 189 students were enrolled in M.Phill programme in Applied Psychology, Arabic, Education, English, Media Studies, Islamic Studies, Pakistan Studies, History, Persian, and Urdu. In the beginning, the Institute organized an orientation workshop for learners to guide them studying in distance education system. The programme was offered under semester system and the semester was broke up into two halves –mid-term and final term. The respective departments provided learning materials to students whereas the IDE provided instructional booklet. Submission of two assignments was compulsory for the entire semester; one before mid-term and second before final-term workshop/ examination for each of the courses. Similarly, students’ presence in workshops for 24 hours (12 during mid-term and 12 during final-term workshop for one 3-credit hour course was mandatory. Students’ support services were provided through Skype conference, social media and mobile phones. Students necessarily had to give presentations and submit their assignments after checking their similarity index by using turnitin software. At the

  18. Holistic approach to production systems from the perspective of lean manufacturing and viable systems model; Aproximacion holistica a los sistemas de produccion desde la perspectiva Lean Manufacturing y Modelos de Sistemas Viables

    Energy Technology Data Exchange (ETDEWEB)

    Puche Regaliza, J. C.; Costas Gual, J.

    2012-07-01

    The reductionism approach usually adopted by many organizations provokes too often a problem of sustain ability in the market over time in these organizations. To increase this sustain ability, we propose a structural and a behavioral change, in a way that the reductionism is replaced by an holistic approach appropriate to address the dynamic complexity inherent in any organization. With regard to structural change, we propose the use of Organizational Cybernetics and particularly the Viable System Model. With respect to behavior change, we propose the use of Lean Manufacturing paradigm. (Author)

  19. Managing Viable Knowledge

    NARCIS (Netherlands)

    Achterbergh, J.M.I.M.; Vriens, D.J.

    2002-01-01

    In this paper, Beer's Viable System Model (VSM) is applied to knowledge management. Based on the VSM, domains of knowledge are identified that an organization should possess to maintain its viability. The logic of the VSM is also used to support the diagnosis, design and implementation of the

  20. International differences in design approach

    International Nuclear Information System (INIS)

    Roberts, A.C.; McFarlane, J.P.

    1998-01-01

    The objective of this paper is to review a number of separate research studies and civil engineering nuclear projects from the authors' experience, with a view to examining the apparent differences in approach taken by different nationalities in the civil engineering design and specification of nuclear facilities. In particular, the development of design codes applicable to the UK nuclear power industry is reviewed and comparisons made with the highly regulated approach adopted in other major nuclear power generating countries. Significant differences resulting from the use of specific design codes and regulations are identified. (author)

  1. Listening Comprehension: Approach, Design, Procedure.

    Science.gov (United States)

    Richards, Jack C.

    1983-01-01

    Three dimensions in the teaching of listening comprehension are outlined: (1) a theory is presented that takes account of the cognitive processes used (approach); (2) listeners' needs are analyzed and a taxonomy of microskills and objectives for teaching them are proposed (design); and (3) classroom exercises and activities are suggested…

  2. Designing for Uncertainty: Three Approaches

    Science.gov (United States)

    Bennett, Scott

    2007-01-01

    Higher education wishes to get long life and good returns on its investment in learning spaces. Doing this has become difficult because rapid changes in information technology have created fundamental uncertainties about the future in which capital investments must deliver value. Three approaches to designing for this uncertainty are described…

  3. ANALYSING PRODUCTION DESIGN: POSITIONS AND APPROACHES

    DEFF Research Database (Denmark)

    Ion Wille, Jakob

    2017-01-01

    This article discusses the challenges of understanding production design and reviews dominant approaches to production design analysis.......This article discusses the challenges of understanding production design and reviews dominant approaches to production design analysis....

  4. Experimental design a chemometric approach

    CERN Document Server

    Deming, SN

    1987-01-01

    Now available in a paperback edition is a book which has been described as ``...an exceptionally lucid, easy-to-read presentation... would be an excellent addition to the collection of every analytical chemist. I recommend it with great enthusiasm.'' (Analytical Chemistry). Unlike most current textbooks, it approaches experimental design from the point of view of the experimenter, rather than that of the statistician. As the reviewer in `Analytical Chemistry' went on to say: ``Deming and Morgan should be given high praise for bringing the principles of experimental design to the level of the p

  5. What we miss in order to be able to design and build a commercially viable fusion reactor

    International Nuclear Information System (INIS)

    Andreani, R.

    1999-01-01

    The paper considers in a critical way the different areas in which work is required to provide sufficient information in view of designing a reliable and attractive fusion reactor. Four main areas of activity are considered: physics, technology, engineering, safety. In physics the trend is positive towards a better understanding of suitable plasma regimes to be confirmed through further experimentation on the operating machines. Engineering has already proven itself by the design and construction of a number of experimental machines. In addition a large data base obtained from design and operation of fission reactors is available. Safety is reaching very satisfactory results in the analysis of the impact of fusion on man and the environment. Where it is still a large unsolved problem is concerning materials capable of standing the harsh fusion environment for an adequate number of years. An intense neutron source is needed in order to allow the necessary developments [it

  6. What we miss in order to be able to design and build a commercially viable fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Andreani, R. [ENEA, Centro Ricerche Frascati, RM (Italy). Dipt. Energia

    1999-07-01

    The paper considers in a critical way the different areas in which work is required to provide sufficient information in view of designing a reliable and attractive fusion reactor. [Italian] Il rapporto considera in modo critico le differenti aree nelle quali si richiede ulteriore lavoro per fornire informazioni al fine di progettare un reattore a fusione affidabile ed economicamente competitivo.

  7. A subtractive approach to interior intrusion detection system design

    International Nuclear Information System (INIS)

    Sons, R.J.; Graham, R.H. Jr.

    1986-01-01

    This paper discusses the subtractive approach to interior intrusion detection system design which assumes that all sensors are viable candidates until they are subjected to the constraints imposed by a particular facility. The constraints are determined by a sequence of questions concerning parameters such as threat definition, facility description and operation, environment, assets to be protected, security system capabilities, and cost. As a result of the questioning, some sensors will be eliminated from the candidate list, and the ''best'' set of sensors for the facility will remain. This form of questioning could be incorporated into an expert system aiding future intrusion detection system designs

  8. Dendritic cells for active immunotherapy: optimizing design and manufacture in order to develop commercially and clinically viable products.

    Science.gov (United States)

    Nicolette, C A; Healey, D; Tcherepanova, I; Whelton, P; Monesmith, T; Coombs, L; Finke, L H; Whiteside, T; Miesowicz, F

    2007-09-27

    Dendritic cell (DC) active immunotherapy is potentially efficacious in a broad array of malignant disease settings. However, challenges remain in optimizing DC-based therapy for maximum clinical efficacy within manufacturing processes that permit quality control and scale-up of consistent products. In this review we discuss the critical issues that must be addressed in order to optimize DC-based product design and manufacture, and highlight the DC based platforms currently addressing these issues. Variables in DC-based product design include the type of antigenic payload used, DC maturation steps and activation processes, and functional assays. Issues to consider in development include: (a) minimizing the invasiveness of patient biological material collection; (b) minimizing handling and manipulations of tissue at the clinical site; (c) centralized product manufacturing and standardized processing and capacity for commercial-scale production; (d) rapid product release turnaround time; (e) the ability to manufacture sufficient product from limited starting material; and (f) standardized release criteria for DC phenotype and function. Improvements in the design and manufacture of DC products have resulted in a handful of promising leads currently in clinical development.

  9. What we miss in order to be able to design and build a commercially viable fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Andreani, R. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dipt. Energia

    1999-07-01

    The paper considers in a critical way the different areas in which work is required to provide sufficient information in view of designing a reliable and attractive fusion reactor. Four main areas of activity are considered: physics, technology, engineering, safety. In physics the trend is positive towards a better understanding of suitable plasma regimes to be confirmed through further experimentation on the operating machines. Engineering has already proven itself by the design and construction of a number of experimental machines. In addition a large data base obtained from design and operation of fission reactors is available. Safety is reaching very satisfactory results in the analysis of the impact of fusion on man and the environment. Where it is still a large unsolved problem is concerning materials capable of standing the harsh fusion environment for an adequate number of years. An intense neutron source is needed in order to allow the necessary developments. [Italian] Il rapporto considera in modo critico le differenti aree nelle quali si richiede ulteriore lavoro per fornire informazini sufficienti al fine di progettare un reattore a fusione affidabile ed economicamente competitivo. Vengono considerate quattro aree principali di attivita': fisica, tecnologia, ingegneria, sicurezza. Nella fisica, vi e' una positiva tendenza verso una migliore comprensione di regimi di plasma favorevoli da confermare attraverso ulteriore sperimentazione sulle macchine funzionanti. L' ingegneria ha gia' dato dimostrazione di se' col progetto e la costruzione di un notevole numero di macchine sperimentali. In aggiunta e' disponibile un gran numero di dati ottenuti dalla progettazione, realizzazione e funzionamento dei reattori a fissione. La sicurezza sta raggiungendo risultati molto soddisfacenti nell'analisi dell'impatto della fusione sull'uomo e sull'ambiente. Un grosso problema tuttora irresoluto e' quello dei

  10. Using design tools in strategy workshops to co-create viable and value creating business model ideas with relational business-to-business partners

    DEFF Research Database (Denmark)

    Evers, Winie; Sørensen, Kirsten Bonde

    To know how to maintain or restore ongoing performance in a firm, managers need to have deep understanding of their business model and the relations on which it is built (Demil & Lecocq, 2010:243). Connected relationships are enabling the survival and growth of firms, as argued by Hakansson...... & Snehota (1995), and effective relational participation therefore involves understanding of one’s own and relational partners’ business models, including the value they seek from their network (George and Bock, 2010). But little research focus on how design can reveal dominant mental models and support...... better relational interaction between firm and its stakeholders, when meeting to co-create viable and value creating business model ideas....

  11. Designing primers and evaluation of the efficiency of propidium monoazide - Quantitative polymerase chain reaction for counting the viable cells of Lactobacillus gasseri and Lactobacillus salivarius.

    Science.gov (United States)

    Lai, Chieh-Hsien; Wu, Sih-Rong; Pang, Jen-Chieh; Ramireddy, Latha; Chiang, Yu-Cheng; Lin, Chien-Ku; Tsen, Hau-Yang

    2017-07-01

    The purpose of this study is to evaluate the efficiency of using propidium monoazide (PMA) real-time quantitative polymerase chain reaction (qPCR) to count the viable cells of Lactobacillus gasseri and Lactobacillus salivarius in probiotic products. Based on the internal transcription spacer and 23S rRNA genes, two primer sets specific for these two Lactobacillus species were designed. For a probiotic product, the total deMan Rogosa Sharpe plate count was 8.65±0.69 log CFU/g, while for qPCR, the cell counts of L. gasseri and L. salivarius were 8.39±0.14 log CFU/g and 8.57±0.24 log CFU/g, respectively. Under the same conditions, for its heat-killed product, qPCR counts for L. gasseri and L. salivarius were 6.70±0.16 log cells/g and 7.67±0.20 log cells/g, while PMA-qPCR counts were 5.33±0.18 log cells/g and 5.05±0.23 log cells/g, respectively. For cell dilutions with a viable cell count of 8.5 log CFU/mL for L. gasseri and L. salivarius, after heat killing, the PMA-qPCR count for both Lactobacillus species was near 5.5 log cells/mL. When the PMA-qPCR counts of these cell dilutions were compared before and after heat killing, although some DNA might be lost during the heat killing, significant qPCR signals from dead cells, i.e., about 4-5 log cells/mL, could not be reduced by PMA treatment. Increasing PMA concentrations from 100 μM to 200 μM or light exposure time from 5 minutes to 15 minutes had no or, if any, only minor effect on the reduction of qPCR signals from their dead cells. Thus, to differentiate viable lactic acid bacterial cells from dead cells using the PMA-qPCR method, the efficiency of PMA to reduce the qPCR signals from dead cells should be notable. Copyright © 2016. Published by Elsevier B.V.

  12. Designing primers and evaluation of the efficiency of propidium monoazide – Quantitative polymerase chain reaction for counting the viable cells of Lactobacillus gasseri and Lactobacillus salivarius

    Directory of Open Access Journals (Sweden)

    Chieh-Hsien Lai

    2017-07-01

    Full Text Available The purpose of this study is to evaluate the efficiency of using propidium monoazide (PMA real-time quantitative polymerase chain reaction (qPCR to count the viable cells of Lactobacillus gasseri and Lactobacillus salivarius in probiotic products. Based on the internal transcription spacer and 23S rRNA genes, two primer sets specific for these two Lactobacillus species were designed. For a probiotic product, the total deMan Rogosa Sharpe plate count was 8.65±0.69 log CFU/g, while for qPCR, the cell counts of L. gasseri and L. salivarius were 8.39±0.14 log CFU/g and 8.57±0.24 log CFU/g, respectively. Under the same conditions, for its heat-killed product, qPCR counts for L. gasseri and L. salivarius were 6.70±0.16 log cells/g and 7.67±0.20 log cells/g, while PMA-qPCR counts were 5.33±0.18 log cells/g and 5.05±0.23 log cells/g, respectively. For cell dilutions with a viable cell count of 8.5 log CFU/mL for L. gasseri and L. salivarius, after heat killing, the PMA-qPCR count for both Lactobacillus species was near 5.5 log cells/mL. When the PMA-qPCR counts of these cell dilutions were compared before and after heat killing, although some DNA might be lost during the heat killing, significant qPCR signals from dead cells, i.e., about 4–5 log cells/mL, could not be reduced by PMA treatment. Increasing PMA concentrations from 100 μM to 200 μM or light exposure time from 5 minutes to 15 minutes had no or, if any, only minor effect on the reduction of qPCR signals from their dead cells. Thus, to differentiate viable lactic acid bacterial cells from dead cells using the PMA-qPCR method, the efficiency of PMA to reduce the qPCR signals from dead cells should be notable.

  13. Ancient Climatic Architectural Design Approach

    Directory of Open Access Journals (Sweden)

    Nasibeh Faghih

    2013-01-01

    Full Text Available Ancient climatic architecture had found out a series of appropriate responses for the best compatibility with the critical climate condition for instance, designing ‘earth sheltered houses’ and ‘courtyard houses’. They could provide human climatic comfort without excessive usage of fossil fuel resources. Owing to the normal thermal conditions in the ground depth, earth sheltered houses can be slightly affected by thermal fluctuations due to being within the earth. In depth further than 6.1 meters, temperature alternation is minute during the year, equaling to average annual temperature of outside. More to the point, courtyard buildings as another traditional design approach, have prepared controlled climatic space based on creating the maximum shade in the summer and maximum solar heat absorption in the winter. The courtyard houses served the multiple functions of lighting to the rooms, acting as a heat absorber in the summer and a radiator in the winter, as well as providing an open space inside for community activities. It must be noted that they divided into summer and winter zones located in south and north of the central courtyard where residents were replaced into them according to changing the seasons. Therefore, Ancient climatic buildings provided better human thermal comfort in comparison with the use contemporary buildings of recent years, except with the air conditioning

  14. Organizational design approaches in management consulting

    NARCIS (Netherlands)

    Visscher, Klaasjan; Visscher-Voerman, Irene

    2010-01-01

    Purpose: The purpose of this paper is to map the variety in organizational design approaches, to clarify their differences, and to find out what constitutes good designing in practice. - Design/methodology/approach: A series of in-depth interviews with experienced, high-reputation consultants is

  15. Highlights in mechatronic design approaches

    NARCIS (Netherlands)

    Dertien, Edwin Christian; Stramigioli, Stefano; Zangh, Dan; Wei, Bin

    2017-01-01

    In the recent years a major change in the engineering process of mechatronics and robotics has taken place. In various design oriented laboratories around the world a shift can be recognised from a focus on analysis, simulation and modelling combined with outsourcing hardware design to the use of

  16. Constructive approaches to the space NPP designing

    International Nuclear Information System (INIS)

    Eremin, A.G.; Korobkov, L.S.; Matveev, A.V.; Trukhanov, Yu.L.; Pyshko, A.P.

    2000-01-01

    An example of designing a space NPP intended for power supply of telecommunication satellite is considered. It is shown that the designing approach based on the introduction of a leading criterion and dividing the design problems in two independent groups (reactor with radiation shield and equipment module) permits to develop the optimal design of a space NPP [ru

  17. Islamic design a mathematical approach

    CERN Document Server

    Wichmann, Brian

    2017-01-01

    This book deals with the genre of geometric design in the Islamic sphere. Part I presents an overview of Islamic history, its extraordinary spread from the Atlantic to the borders of China in its first century, its adoption of the cultural outlook of the older civilisations that it conquered (in the Middle East, Persia and Central Asia), including their philosophical and scientific achievements - from which it came to express its own unique and highly distinctive artistic and architectural forms. Part II represents the mathematical analysis of Islamic geometric designs.  The presentation offers unlimited precision that allows software to reconstruct the design vision of the original artist. This book will be of interest to Islamic academics, mathematicians as well as to artists & art students.

  18. Organization design the collaborative approach

    CERN Document Server

    Stanford, Naomi

    2005-01-01

    Organization Design looks at how you need to change the ways your organization does things in order to increase productivity, performance, and profit. Providing the knowledge and method to handle the kind of recurring organisational change that all businesses face, those which do not involve transforming the entire enterprise but which necessitate significant change at the business unit, divisional, functional, facility or local levels. The problem lies in knowing what needs to change and how to change it. Taking the organisation as a designed system, it describes four major elements of organizations: the work - the basic tasks to be done by the organisation and its parts, the people - characteristics of individuals in the organization, formal organization - structures eg the organisation hierarchy, processes, and methods that are formally created to get individuals to perform tasks, informal organization - emerging arrangements including variations to the norm, processes, and relationships, commonly describe...

  19. Design approach to local blockages

    International Nuclear Information System (INIS)

    Roychowdhury, D.G.; Govindarajan, S.; Chetal, S.C.; Bhoje, S.B.

    2000-01-01

    In LMFBR, whole core meltdown accident falls in residual risk category. Propagation of a local fault to whole core, however, needs attention. Subassembly accidents are divided into two categories, Design Basis and Beyond Design Basis accidents. Design Basis is further classified into four categories. All events affecting fuel pin performance are identified and categorised, Total Instantaneous Blockage has been identified as the envelope of all local faults and categorised as BDB event and the safety objective is to demonstrate that no damage will propagate beyond six neighbouring SA. A core catcher has been provided for retention of core debris and cooling it by natural convection. Local blockages may be active and passive. Active blockages can be detected by DND signal. For passive blockages, detection is difficult. Hence, development of a finite volume computer code based on the porous body formulation has been undertaken to define the maximum allowable defect. Experimental programmes have been undertaken to understand blockage mechanism, define maximum credible defect and the thermalhydraulic behaviour of SA with local blockages. Also an experimental programme with a totally blocked SA with a bundle of heated pins has been undertaken to understand the behaviour of the SA. (author)

  20. Basic Employability Skills: A Triangular Design Approach

    Science.gov (United States)

    Rosenberg, Stuart; Heimler, Ronald; Morote, Elsa-Sofia

    2012-01-01

    Purpose: This paper seeks to examine the basic employability skills needed for job performance, the reception of these skills in college, and the need for additional training in these skills after graduation. Design/methodology/approach: The research was based on a triangular design approach, in which the attitudes of three distinct groups--recent…

  1. Coal liquefaction becomes viable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-11-15

    In 2003 the May/June issue of CoalTrans International speculated that coal liquefaction would become viable due to falling coal prices. This has not proved the case but the sustained high oil price is sparking new interest. A survey by Energy Intelligence and Marketing Research during November 2005 revealed a growth in the number of projects under development or at the feasibility stage. The article reports projects in China, the USA, Australia, New Zealand, the Philippines and India. China is commissioning the first wave of large liquefaction plants. The key question is whether other countries, particularly the USA, will follow.

  2. An Emerging Approach to Systems Design

    DEFF Research Database (Denmark)

    Kensing, Finn; Bødker, Keld; Simonsen, Jesper

    The paper presents our first attempt to formulate a design approach based upon our experiences from nine design projects in various organizations. In the projects we have experimented with techniques for analyzing the needs of the organization in question and for supporting the design process....... The term "approach" is used as something in between commodified methods and isolated techniques supporting one or a few activities....

  3. Plasticity Approach to Shear Design

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1998-01-01

    The paper presents some plastic models for shear design of reinforced concrete beams. Distinction is made between two shear failure modes, namely web crushing and crack sliding. The first mentioned mode is met in beams with large shear reinforcement degrees. The mode of crack sliding is met in non......-shear reinforced beams as well as in lightly shear reinforced beams. For such beams the shear strength is determined by the recently developed crack sliding model. This model is based upon the hypothesis that cracks can be transformed into yield lines, which have lower sliding resistance than yield lines formed...... in uncracked concrete. Good agree between theory and tests has been found.Keywords: dsign, plasticity, reinforced concrete, reinforcement, shear, web crushing....

  4. An Approach to Assist Designers With Their Queries and Designs

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2006-01-01

    Recent research investigating how engineers search for information has concluded that engineering designers acquire assistance when formulating queries. An approach to assist designers with their queries is presented. This approach forms part of a knowledge management system, where indexed...... documents are entered into the system (or are automatically indexed by tools within a system). The method builds up a network based upon indices assigned to documents. The network (or chunk) is presented back to the user once a search for knowledge has been completed. The network is build up as indexed...... documents are entered in to a knowledge-based system and is generated dynamically. The network can be used to assist a designer in searching for information; reformulating a query and; to prompt design tasks. This paper presents an approach to prompt designers with their design queries, along with some...

  5. Experimental design research approaches, perspectives, applications

    CERN Document Server

    Stanković, Tino; Štorga, Mario

    2016-01-01

    This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current research practice where methods are diverging and integration between individual, team and organizational under...

  6. An architectural approach to level design

    CERN Document Server

    Totten, Christopher W

    2014-01-01

    Explore Level Design through the Lens of Architectural and Spatial Experience TheoryWritten by a game developer and professor trained in architecture, An Architectural Approach to Level Design is one of the first books to integrate architectural and spatial design theory with the field of level design. It explores the principles of level design through the context and history of architecture, providing information useful to both academics and game development professionals.Understand Spatial Design Principles for Game Levels in 2D, 3D, and Multiplayer ApplicationsThe book presents architectura

  7. Beyond (eco)design : Current approaches to sustainable packaging design

    NARCIS (Netherlands)

    Wever, R.

    2014-01-01

    Packaging has always received a lot of attention within the field of design for sustainability. The classical approach has been to mainly focus on reducing the impact of the packaging. This approach stems from the ill-informed position that packaging is superfluous, or at best there only for

  8. Design optimization for cost and quality: The robust design approach

    Science.gov (United States)

    Unal, Resit

    1990-01-01

    Designing reliable, low cost, and operable space systems has become the key to future space operations. Designing high quality space systems at low cost is an economic and technological challenge to the designer. A systematic and efficient way to meet this challenge is a new method of design optimization for performance, quality, and cost, called Robust Design. Robust Design is an approach for design optimization. It consists of: making system performance insensitive to material and subsystem variation, thus allowing the use of less costly materials and components; making designs less sensitive to the variations in the operating environment, thus improving reliability and reducing operating costs; and using a new structured development process so that engineering time is used most productively. The objective in Robust Design is to select the best combination of controllable design parameters so that the system is most robust to uncontrollable noise factors. The robust design methodology uses a mathematical tool called an orthogonal array, from design of experiments theory, to study a large number of decision variables with a significantly small number of experiments. Robust design also uses a statistical measure of performance, called a signal-to-noise ratio, from electrical control theory, to evaluate the level of performance and the effect of noise factors. The purpose is to investigate the Robust Design methodology for improving quality and cost, demonstrate its application by the use of an example, and suggest its use as an integral part of space system design process.

  9. Summary of design for behavioural change approaches

    NARCIS (Netherlands)

    Niedderer, Kristina; Clune, Stephen; Ludden, Geke; Niedderer, Kristina; Clune, Stephen; Ludden, Geke

    2017-01-01

    The chapters in Part 2 have presented a diverse selection of design for behavioural change approaches. This summary chapter explores the approaches presented in relation to the psychological and sociological (and other) models that authors have drawn on. This is achieved by first presenting the

  10. Project Management Approaches for Online Learning Design

    Science.gov (United States)

    Eby, Gulsun; Yuzer, T. Volkan

    2013-01-01

    Developments in online learning and its design are areas that continue to grow in order to enhance students' learning environments and experiences. However, in the implementation of new technologies, the importance of properly and fairly overseeing these courses is often undervalued. "Project Management Approaches for Online Learning Design"…

  11. SLS Navigation Model-Based Design Approach

    Science.gov (United States)

    Oliver, T. Emerson; Anzalone, Evan; Geohagan, Kevin; Bernard, Bill; Park, Thomas

    2018-01-01

    The SLS Program chose to implement a Model-based Design and Model-based Requirements approach for managing component design information and system requirements. This approach differs from previous large-scale design efforts at Marshall Space Flight Center where design documentation alone conveyed information required for vehicle design and analysis and where extensive requirements sets were used to scope and constrain the design. The SLS Navigation Team has been responsible for the Program-controlled Design Math Models (DMMs) which describe and represent the performance of the Inertial Navigation System (INS) and the Rate Gyro Assemblies (RGAs) used by Guidance, Navigation, and Controls (GN&C). The SLS Navigation Team is also responsible for the navigation algorithms. The navigation algorithms are delivered for implementation on the flight hardware as a DMM. For the SLS Block 1-B design, the additional GPS Receiver hardware is managed as a DMM at the vehicle design level. This paper provides a discussion of the processes and methods used to engineer, design, and coordinate engineering trades and performance assessments using SLS practices as applied to the GN&C system, with a particular focus on the Navigation components. These include composing system requirements, requirements verification, model development, model verification and validation, and modeling and analysis approaches. The Model-based Design and Requirements approach does not reduce the effort associated with the design process versus previous processes used at Marshall Space Flight Center. Instead, the approach takes advantage of overlap between the requirements development and management process, and the design and analysis process by efficiently combining the control (i.e. the requirement) and the design mechanisms. The design mechanism is the representation of the component behavior and performance in design and analysis tools. The focus in the early design process shifts from the development and

  12. Sustainable supply chain design: a configurational approach.

    Science.gov (United States)

    Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

    2014-01-01

    Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

  13. Sustainable Supply Chain Design: A Configurational Approach

    Science.gov (United States)

    Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

    2014-01-01

    Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

  14. A Design Approach for Tangible User Interfaces

    Directory of Open Access Journals (Sweden)

    Bernard Champoux

    2004-05-01

    Full Text Available This paper proposes a mechanism to design Tangible User Interface (TUI based on Alexander’s (1964 design approach i.e. achieving fitness between the form and its context. Adapted to the design of TUIs, the fitness-of-use mechanism now takes into consideration the potential conflicts between the hardware of the artifact (electro-mechanical components and the form of the user’s control (Physical-ergonomics. The design problem is a search for an effortless co-existence (fitness-of-use between these two aspects. Tangible interface design differs from traditional graphical interface design as unsolved conflicts between hardware and ergonomics can deeply affect the desired interaction. Here we propose a mechanism (in the form of eight questions that support the design by defining the boundaries of the task, orienting the hardware (electro-mechanics and ergonomics of the design space for various sub-tasks and finally fitting the different components of the hardware and physical-ergonomics of the artefact to provide a component level fitness which will delineate the final tangible interfaces. We further evaluate the effectiveness and efficiency of our approach by quantitative user evaluation

  15. Adapting advanced engineering design approaches to building design - potential benefits

    NARCIS (Netherlands)

    Hopfe, C.J.; Struck, C.; Hensen, J.L.M.; Böhms, M.

    2006-01-01

    A number of industries continuously progress advancing their design approaches based on the changing market constraints. Examples such as car, ship and airplane manufacturing industries utilize process setups and techniques, that differ significantly from the processes and techniques used by the

  16. Adapting advanced engineering design approaches to building design. Potential benefits

    NARCIS (Netherlands)

    Böhms, M.

    2006-01-01

    A number of industries continuously progress advancing their design approaches based on the changing market constraints. Examples such as car, ship and airplane manufacturing industries utilize process setups and techniques, that differ significantly from the processes and techniques used by the

  17. A practical approach to programmatic assessment design.

    Science.gov (United States)

    Timmerman, A A; Dijkstra, J

    2017-12-01

    Assessment of complex tasks integrating several competencies calls for a programmatic design approach. As single instruments do not provide the information required to reach a robust judgment of integral performance, 73 guidelines for programmatic assessment design were developed. When simultaneously applying these interrelated guidelines, it is challenging to keep a clear overview of all assessment activities. The goal of this study was to provide practical support for applying a programmatic approach to assessment design, not bound to any specific educational paradigm. The guidelines were first applied in a postgraduate medical training setting, and a process analysis was conducted. This resulted in the identification of four steps for programmatic assessment design: evaluation, contextualisation, prioritisation and justification. Firstly, the (re)design process starts with sufficiently detailing the assessment environment and formulating the principal purpose. Key stakeholders with sufficient (assessment) expertise need to be involved in the analysis of strengths and weaknesses and identification of developmental needs. Central governance is essential to balance efforts and stakes with the principal purpose and decide on prioritisation of design decisions and selection of relevant guidelines. Finally, justification of assessment design decisions, quality assurance and external accountability close the loop, to ensure sound underpinning and continuous improvement of the assessment programme.

  18. Design and Implementation of Collaborative Research Approaches

    Science.gov (United States)

    Venti, Mike W.; Berger, David E.

    2009-01-01

    This poster reviews the collarborative research approaches that NASA has been designing and implementing for the Integrated Vehicle Health Management (IVHM) Project. The inputs for the technical plan are reviewed, the Research Test and Integration Plan (RTIP) WIKI, is used to create and propose a multi-themed and multi-partner research testing opportunities. The outputs are testing opportunities.

  19. Global floor planning approach for VLSI design

    International Nuclear Information System (INIS)

    LaPotin, D.P.

    1986-01-01

    Within a hierarchical design environment, initial decisions regarding the partitioning and choice of module attributes greatly impact the quality of the resulting IC in terms of area and electrical performance. This dissertation presents a global floor-planning approach which allows designers to quickly explore layout issues during the initial stages of the IC design process. In contrast to previous efforts, which address the floor-planning problem from a strict module placement point of view, this approach considers floor-planning from an area planning point of view. The approach is based upon a combined min-cut and slicing paradigm, which ensures routability. To provide flexibility, modules may be specified as having a number of possible dimensions and orientations, and I/O pads as well as layout constraints are considered. A slicing-tree representation is employed, upon which a sequence of traversal operations are applied in order to obtain an area efficient layout. An in-place partitioning technique, which provides an improvement over previous min-cut and slicing-based efforts, is discussed. Global routing and module I/O pin assignment are provided for floor-plan evaluation purposes. A computer program, called Mason, has been developed which efficiently implements the approach and provides an interactive environment for designers to perform floor-planning. Performance of this program is illustrated via several industrial examples

  20. Designing Genetics Instruction for a Socratic Approach

    Science.gov (United States)

    Idros, Sharifah Norhaidah Syed

    2004-01-01

    Science is at heart a rational activity. Reasoning, being an important component of critical thinking has been successfully taught using Socratic methods. As an approach, the instructor or designer of instruction models an inquiring and probing mind focusing on providing questions and not answers. The main aim has been to allow learners to…

  1. Design approach for granular emulsion mixes (GEMS)

    CSIR Research Space (South Africa)

    Grobler, JE

    1994-10-01

    Full Text Available binder contents of less than 1,5%, using test methods such as the California Bearing Ratio test method. The mix and structural design procedures for both approaches are discussed. The research was done on behalf of the Southern African Bitumen and Tar...

  2. Different design approaches to structural fire safety

    DEFF Research Database (Denmark)

    Giuliani, Luisa; Budny, I.

    2013-01-01

    -priori evaluate which design is the safest or the most economical one: a punctual analysis of the different aspects and a comparison of the resulting designs is therefore of interest and is presented in this paper with reference to the case study considered.The third approach refers instead to a performance......-based fire design of the structure(PBFD), where safety goals are explicitly defined and a deeper knowledge of the structural response to fire effects can be achieved, for example with the avail of finite element analyses (FEA). On the other hand, designers can’t follow established procedures when undertaking...... such advanced investigations, which are generally quite complex ones, due to the presence of material degradation and large displacements induced by fire, as well as the possible triggering of local mechanism in the system. An example of advanced investigations for fire design is given in the paper...

  3. Bionic Design Methods - A practical approach

    DEFF Research Database (Denmark)

    Kepler, Jørgen Asbøll; Stokholm, Marianne Denise J.

    2004-01-01

    Nature has served as inspiration for product design throughout history. Applications range from poetic translations of form to utilization of primary functional principles. This paper describes a generally applicable design methodology for transforming natural functional principles to feasible...... product design. From a formulation of design demands, which need not necessarily be very precise, the approach continues with a study of natural objects (anaimals, plants) which are subject to the same demands. From this study, the working principle(s) are derived. This (these) are then clarified through...... illustrative models, which should be simplified as much as possible. The simplified principle may now be evaluated and transformed into practical design. The methodology is clarified through examples, taken from a series of extended workshops held atAalborg University ....

  4. Engineering design: A cognitive process approach

    Science.gov (United States)

    Strimel, Greg Joseph

    research objectives of this study. Two independent coders then coded the video/audio recordings and the additional design data using Halfin's (1973) 17 mental processes for technological problem-solving. The results of this study indicated that the participants employed a wide array of mental processes when solving engineering design challenges. However, the findings provide a general analysis of the number of times participants employed each mental process, as well as the amount of time consumed employing the various mental processes through the different stages of the engineering design process. The results indicated many similarities between the students solving the problem, which may highlight voids in current technology and engineering education curricula. Additionally, the findings showed differences between the processes employed by participants that created the most successful solutions and the participants who developed the least effective solutions. Upon comparing and contrasting these processes, recommendations for instructional strategies to enhance a student's capability for solving engineering design problems were developed. The results also indicated that students, when left without teacher intervention, use a simplified and more natural process to solve design challenges than the 12-step engineering design process reported in much of the literature. Lastly, these data indicated that students followed two different approaches to solving the design problem. Some students employed a sequential and logical approach, while others employed a nebulous, solution centered trial-and-error approach to solving the problem. In this study the participants who were more sequential had better performing solutions. Examining these two approaches and the student cognition data enabled the researcher to generate a conceptual engineering design model for the improved teaching and development of engineering design problem solving.

  5. Mechanism design visual and programmable approaches

    CERN Document Server

    Russell, Kevin; Sodhi, Raj S

    2013-01-01

    "… the book provides a lot of MATLAB® and SimMechanics examples. Students could benefit from the experience of solving the complex spatial synthesis problems using computer tools. The mathematics software tools are very efficient to do the displacement analysis, too."-Wen-Tzong Lee, National Pingtung University of Science and Technology, Neipu, Taiwan"The book covers a vast range of mechanism kinematics and design. The algorithm covering the topics presented is useful for mechanism design in class and homework assignments. The book provides an alternative modern tool, as compared to kinematics analysis methods based on Fortran or QuickBasic algorithms, covering all topics for mechanism design."-Thomas G. Chondros, University of Patras, Greece"… well elaborated for students at their first approach to the subject of mechanism design and its computation with MATLAB®."-Marco Ceccarelli, University of Cassino and South Latium, Italy.

  6. Phytoestrogens: a viable option?

    Science.gov (United States)

    Russell, Lori; Hicks, G Swink; Low, Annette K; Shepherd, Jinna M; Brown, C Andrew

    2002-10-01

    Estrogen replacement therapy is one of the most commonly prescribed medicines in the United States by traditional medical professionals. Over the past decade, the market for complementary/ alternative therapies for hormone replacement has dramatically increased. Women are seeking more "natural" alternatives to treat menopausal symptoms. Well-designed randomized clinical trials are often lacking, as is the information on efficacy and safety. This article will review several popular herbal therapies for menopausal symptoms including phytoestrogens, black cohosh (Cimicifuga racemosa), dong quai (Angelica sinensis), chast tree (Vitex agnus-castus), and wild Mexican yam. Their use, mechanism of action, and adverse effects are outlined.

  7. A simplified approach to design for assembly

    DEFF Research Database (Denmark)

    Moultrie, James; Maier, Anja

    2014-01-01

    The basic principles of design for assembly (DfA) are well established. This paper presents a short review of the development of DfA approaches before presenting a new tool in which these principles are packaged for use in teams, both in an industrial and an educational context. The fundamental...... consideration in the design of this tool is to encourage wide team participation from across an organisation and is thus physical rather than software-based. This tool builds on the process developed by Appleton whilst at the University of Cambridge. In addition to the traditional analysis of component fitting...

  8. Modelling Approach In Islamic Architectural Designs

    Directory of Open Access Journals (Sweden)

    Suhaimi Salleh

    2014-06-01

    Full Text Available Architectural designs contribute as one of the main factors that should be considered in minimizing negative impacts in planning and structural development in buildings such as in mosques. In this paper, the ergonomics perspective is revisited which hence focuses on the conditional factors involving organisational, psychological, social and population as a whole. This paper tries to highlight the functional and architectural integration with ecstatic elements in the form of decorative and ornamental outlay as well as incorporating the building structure such as wall, domes and gates. This paper further focuses the mathematical aspects of the architectural designs such as polar equations and the golden ratio. These designs are modelled into mathematical equations of various forms, while the golden ratio in mosque is verified using two techniques namely, the geometric construction and the numerical method. The exemplary designs are taken from theSabah Bandaraya Mosque in Likas, Kota Kinabalu and the Sarawak State Mosque in Kuching,while the Universiti Malaysia Sabah Mosque is used for the Golden Ratio. Results show thatIslamic architectural buildings and designs have long had mathematical concepts and techniques underlying its foundation, hence, a modelling approach is needed to rejuvenate these Islamic designs.

  9. A revised approach to the ULDB design

    Science.gov (United States)

    Smith, M.; Cathey, H.

    The National Aeronautics and Space Administration Balloon Program has experienced problems in the scaling up of the proposed Ultra Long Duration Balloon. Full deployment of the balloon envelope has been the issue for the larger balloons. There are a number of factors that contribute to this phenomenon. Analytical treatments of the deployment issue are currently underway. It has also been acknowledged that the current fabrication approach using foreshortening is costly, labor intensive, and requires significant handling during production thereby increasing the chances of inducing damage to the envelope. Raven Industries has proposed a new design and fabrication approach that should increase the probability of balloon deployment, does not require foreshortening, will reduce the handling, production labor, and reduce the final balloon cost. This paper will present a description of the logic and approach used to develop this innovation. This development consists of a serial set of steps with decision points that build upon the results of the previous steps. The first steps include limited material development and testing. This will be followed by load testing of bi-axial reinforced cylinders to determine the effect of eliminating the foreshortening. This series of tests have the goal of measuring the strain in the material as it is bi-axially loaded in a condition that closely replicated the application in the full-scale balloon. Constant lobe radius pumpkin shaped test structures will be designed and analyzed. This matrix of model tests, in conjunction with the deployment analyses, will help develop a curve that should clearly present the deployment relationship for this kind of design. This will allow the ``design space'' for this type of balloon to be initially determined. The materials used, analyses, and ground testing results of both cylinders and small pumpkin structures will be presented. Following ground testing, a series of test flights, staged in increments

  10. Economically viable large-scale hydrogen liquefaction

    Science.gov (United States)

    Cardella, U.; Decker, L.; Klein, H.

    2017-02-01

    The liquid hydrogen demand, particularly driven by clean energy applications, will rise in the near future. As industrial large scale liquefiers will play a major role within the hydrogen supply chain, production capacity will have to increase by a multiple of today’s typical sizes. The main goal is to reduce the total cost of ownership for these plants by increasing energy efficiency with innovative and simple process designs, optimized in capital expenditure. New concepts must ensure a manageable plant complexity and flexible operability. In the phase of process development and selection, a dimensioning of key equipment for large scale liquefiers, such as turbines and compressors as well as heat exchangers, must be performed iteratively to ensure technological feasibility and maturity. Further critical aspects related to hydrogen liquefaction, e.g. fluid properties, ortho-para hydrogen conversion, and coldbox configuration, must be analysed in detail. This paper provides an overview on the approach, challenges and preliminary results in the development of efficient as well as economically viable concepts for large-scale hydrogen liquefaction.

  11. Sustainable Design Approach: A case study of BIM use

    Directory of Open Access Journals (Sweden)

    Abdelhameed Wael

    2017-01-01

    The paper describes the methodology of this design approach through BIM strategies adopted in design creation. Case studies of architectural designs are used to highlight the details and benefits of this proposed approach.

  12. ZERODUR: deterministic approach for strength design

    Science.gov (United States)

    Hartmann, Peter

    2012-12-01

    There is an increasing request for zero expansion glass ceramic ZERODUR substrates being capable of enduring higher operational static loads or accelerations. The integrity of structures such as optical or mechanical elements for satellites surviving rocket launches, filigree lightweight mirrors, wobbling mirrors, and reticle and wafer stages in microlithography must be guaranteed with low failure probability. Their design requires statistically relevant strength data. The traditional approach using the statistical two-parameter Weibull distribution suffered from two problems. The data sets were too small to obtain distribution parameters with sufficient accuracy and also too small to decide on the validity of the model. This holds especially for the low failure probability levels that are required for reliable applications. Extrapolation to 0.1% failure probability and below led to design strengths so low that higher load applications seemed to be not feasible. New data have been collected with numbers per set large enough to enable tests on the applicability of the three-parameter Weibull distribution. This distribution revealed to provide much better fitting of the data. Moreover it delivers a lower threshold value, which means a minimum value for breakage stress, allowing of removing statistical uncertainty by introducing a deterministic method to calculate design strength. Considerations taken from the theory of fracture mechanics as have been proven to be reliable with proof test qualifications of delicate structures made from brittle materials enable including fatigue due to stress corrosion in a straight forward way. With the formulae derived, either lifetime can be calculated from given stress or allowable stress from minimum required lifetime. The data, distributions, and design strength calculations for several practically relevant surface conditions of ZERODUR are given. The values obtained are significantly higher than those resulting from the two

  13. An engineering design approach to systems biology.

    Science.gov (United States)

    Janes, Kevin A; Chandran, Preethi L; Ford, Roseanne M; Lazzara, Matthew J; Papin, Jason A; Peirce, Shayn M; Saucerman, Jeffrey J; Lauffenburger, Douglas A

    2017-07-17

    Measuring and modeling the integrated behavior of biomolecular-cellular networks is central to systems biology. Over several decades, systems biology has been shaped by quantitative biologists, physicists, mathematicians, and engineers in different ways. However, the basic and applied versions of systems biology are not typically distinguished, which blurs the separate aspirations of the field and its potential for real-world impact. Here, we articulate an engineering approach to systems biology, which applies educational philosophy, engineering design, and predictive models to solve contemporary problems in an age of biomedical Big Data. A concerted effort to train systems bioengineers will provide a versatile workforce capable of tackling the diverse challenges faced by the biotechnological and pharmaceutical sectors in a modern, information-dense economy.

  14. Distributed design approach in persistent identifiers systems

    Science.gov (United States)

    Golodoniuc, Pavel; Car, Nicholas; Klump, Jens

    2017-04-01

    , we propose using Distributed Hash Tables (DHT), Peer Exchange networks (PEX), Magnet Links, and peer-to-peer (P2P) file sharing networks - the technologies that enable applications such as BitTorrent (Wu et al., 2010). The proposed approach introduces reliable information replication and caching mechanisms, eliminating the need for a central PID data store, and increases overall system fault tolerance due to the lack of a single point of failure. The proposed PID system's design aims to ensure trustworthiness of the system and incorporates important aspects of governance, such as the notion of the authoritative source, data integrity, caching, and data replication control.

  15. Designing Viable Business Models for Living Labs

    Directory of Open Access Journals (Sweden)

    Bernhard R. Katzy

    2012-09-01

    Full Text Available Over 300 regions have integrated the concept of living labs into their economic development strategy since 2006, when the former Finnish Prime Minister Esko Aho launched the living lab innovation policy initiative during his term of European presidency. Despite motivating initial results, however, success cases of turning research into usable new products and services remain few and uncertainty remains on what living labs actually do and contribute. This practitioner-oriented article presents a business excellence model that shows processes of idea creation and team mobilization, new product development, user involvement, and entrepreneurship through which living labs deliver high-potential investment opportunities. Customers of living labs are identified as investors such as venture capitalists or industrial firms because living labs can generate revenue from them to create their own sustainable business model. The article concludes that living labs provide extensive support “lab” infrastructure and that it remains a formidable challenge to finance it, which calls for a more intensive debate.

  16. Designing Viable Republican Constitutions for Modern African ...

    African Journals Online (AJOL)

    sulaiman.adebowale

    2008-04-09

    Apr 9, 2008 ... 45–63. © Council for the Development of Social Science Research in Africa, 2006 ... following grounds: (i) that it was founded on historical injustice to begin with, ..... to protect their subjects against the scourge of slavery?

  17. A Website Design with the Mobile-first Approach

    OpenAIRE

    Satyal, Umesh

    2016-01-01

    This thesis aims to explain the mobile first design approach in web design and development and its advantages over other prevalent approaches. In the study, the mobile web, its trends and different approaches for design and developing a mobile first web application are described and a comparison between mobile sites and mobile first sites is made. The concept of responsive web design and different grid systems are discussed as they are essential factors for responsive web design. Duri...

  18. General approach to quality in design

    International Nuclear Information System (INIS)

    Osborne, W.J.

    1981-01-01

    Design engineers, either consciously or unconsciously, use quality work elements to achieve quality in design. these quality work elements are identified, classified as basic or optional, and explained. The rationale for applying them to the design of fusion devices is presented in terms of effects on performance and costs. Relevant quality terms are defined, and elements of the design quality system are described. Quality of design is the direct responsibility of the design engineer

  19. Systems approach for design control at Monitored Retrievable Storage Project

    International Nuclear Information System (INIS)

    Kumar, P.N.; Williams, J.R.

    1994-01-01

    This paper describes the systems approach in establishing design control for the Monitored Retrievable Storage Project design development. Key elements in design control are enumerated and systems engineering aspects are detailed. Application of lessons learned from the Yucca Mountain Project experience is addressed. An integrated approach combining quality assurance and systems engineering requirements is suggested to practice effective design control

  20. Reflective approach for software design decision making

    NARCIS (Netherlands)

    Razavian, M.; Tang, A.; Capilla, R.; Lago, P.

    2016-01-01

    Good software design practice is difficult to define and teach. Despite the many software design methods and processes that are available, the quality of software design relies on human factors. We notice from literature and our own experiments that some of these factors concern design reasoning and

  1. A business model design framework for viability : a business ecosystem approach

    NARCIS (Netherlands)

    D'Souza, Austin; Velthuijsen, Hugo; Wortmann, J.C.; Huitema, George

    2015-01-01

    Purpose: To facilitate the design of viable business models by proposing a novel business model design framework for viability. Design: A design science research method is adopted to develop a business model design framework for viability. The business model design framework for viability is

  2. Designing future learning. A posthumanist approach to researching design processes

    DEFF Research Database (Denmark)

    Juelskjær, Malou

    I investigate how a design process – leading up to the design of a new education building - enact, transform and highlight tacit everyday practices and experiences in an education setting, whereby becoming an art of managing. I apply a post-humanist performative perspective, highlighting entangled...... agencies rather than focusing on human agency. I focus on the design process rather than the designer. The design process accelerated and performed past and future experiences of schooling, learning, teaching. This called for analytical attention to agential forces of not only the material but also...... and temporalities matter in design processes. Furthermore, the analysis emphasise how design translate affective economies and that attention to those affective economies are vital for the result of the design process....

  3. Impact significance determination-Designing an approach

    International Nuclear Information System (INIS)

    Lawrence, David P.

    2007-01-01

    The question of how best to go about determining the significance of impacts has, to date, only been addressed in a partial and preliminary way. The assumption tends to be made that it is either only necessary to provide explicit, justified reasons for a judgment about significance and/or to explicitly apply a prescribed procedure-a procedure usually involving the staged application of thresholds and/or criteria. The detailed attributes, strengths and limitations of such approaches and possible alternative approaches have yet to be explored systematically. This article addresses these deficiencies by analyzing the characteristics, specific methods and positive and negative tendencies of three general impact significance determination approaches-the technical approach, the collaborative approach and the reasoned argumentation approach. A range of potential composite approaches are also described. With an enhanced understanding of these approaches, together with potential combinations, EIA practitioners and other EIA participants can be in a better position to select an approach appropriate to their needs, to reinforce the positive tendencies and offset the negative tendencies of the selected approach and to combine the best qualities of more than one approach

  4. Design Buildings Optimally: A Lifecycle Assessment Approach

    KAUST Repository

    Hosny, Ossama

    2013-01-01

    This paper structures a generic framework to support optimum design for multi-buildings in desert environment. The framework is targeting an environmental friendly design with minimum lifecycle cost, using Genetic Algorithms (Gas). GAs function through a set of success measures which evaluates the design, formulates a proper objective, and reflects possible tangible/intangible constraints. The framework optimizes the design and categorizes it under a certain environmental category at minimum Life Cycle Cost (LCC). It consists of three main modules: (1) a custom Building InformationModel (BIM) for desert buildings with a compatibility checker as a central interactive database; (2) a system evaluator module to evaluate the proposed success measures for the design; and (3) a GAs optimization module to ensure optimum design. The framework functions through three levels: the building components, integrated building, and multi-building levels. At the component level the design team should be able to select components in a designed sequence to ensure compatibility among various components, while at the building level; the team can relatively locate and orient each individual building. Finally, at the multi-building (compound) level the whole design can be evaluated using success measures of natural light, site capacity, shading impact on natural lighting, thermal change, visual access and energy saving. The framework through genetic algorithms optimizes the design by determining proper types of building components and relative buildings locations and orientations which ensure categorizing the design under a specific category or meet certain preferences at minimum lifecycle cost.

  5. Innovation and design approaches within prospective ergonomics.

    Science.gov (United States)

    Liem, André; Brangier, Eric

    2012-01-01

    In this conceptual article the topic of "Prospective Ergonomics" will be discussed within the context of innovation, design thinking and design processes & methods. Design thinking is essentially a human-centred innovation process that emphasises observation, collaboration, interpretation, visualisation of ideas, rapid concept prototyping and concurrent business analysis, which ultimately influences innovation and business strategy. The objective of this project is to develop a roadmap for innovation, involving consumers, designers and business people in an integrative process, which can be applied to product, service and business design. A theoretical structure comprising of Innovation perspectives (1), Worldviews supported by rationalist-historicist and empirical-idealistic dimensions (2) and Models of "design" reasoning (3) precedes the development and classification of existing methods as well as the introduction of new ones.

  6. An Optimisation Approach for Room Acoustics Design

    DEFF Research Database (Denmark)

    Holm-Jørgensen, Kristian; Kirkegaard, Poul Henning; Andersen, Lars

    2005-01-01

    This paper discuss on a conceptual level the value of optimisation techniques in architectural acoustics room design from a practical point of view. It is chosen to optimise one objective room acoustics design criterium estimated from the sound field inside the room. The sound field is modeled...... using the boundary element method where absorption is incorporated. An example is given where the geometry of a room is defined by four design modes. The room geometry is optimised to get a uniform sound pressure....

  7. Ergonomics approaches to sociotechnical design processes

    DEFF Research Database (Denmark)

    Broberg, Ole

    2003-01-01

    A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating work environment aspects. The design process was seen as a network building activity and as a social shaping process of the artefact. A work environment log is sugges...

  8. Planning and Design: A Systems Approach.

    Science.gov (United States)

    Bozeman, William C.; Clements, Mary A.

    1981-01-01

    Explains "purpose design," a planning and problem-solving strategy involving determination of planning purposes, generation and selection of solutions, specification of solution details, implementation, and evaluation. Describes the application of purpose design to the planning of an alumni association at Black Hawk College, a community…

  9. A RATIONAL APPROACH TO SEPTIC TANK DESIGN

    African Journals Online (AJOL)

    2012-03-01

    Mar 1, 2012 ... to obtain the volume of sludge accumulated in this time interval. Using a minimum ... Design charts and a Microsoft Excel based design programme were produced to ..... Jowett, E. C. and Lay, R. Comparative per- formance of ...

  10. Digital Hardware Design Teaching: An Alternative Approach

    Science.gov (United States)

    Benkrid, Khaled; Clayton, Thomas

    2012-01-01

    This article presents the design and implementation of a complete review of undergraduate digital hardware design teaching in the School of Engineering at the University of Edinburgh. Four guiding principles have been used in this exercise: learning-outcome driven teaching, deep learning, affordability, and flexibility. This has identified…

  11. A HYBRID APPROACH FOR RURAL FEEDER DESIGN

    Directory of Open Access Journals (Sweden)

    DAMANJEET KAUR

    2012-08-01

    Full Text Available In this paper, a population based approach for conductor size selection in rural radial distribution system is presented. The proposed hybrid approach implies a particle swarm optimization (PSO approach in combination with mutant property of differential evolution (DE for conductor size selection in radial distribution system. The conductor size for each feeder segment is selected such that the total cost of capital investment and capitalized cost of energy losses is minimized while constraints of voltage at each node and current carrying capacity of conductor is within the limits. The applicability and effectiveness of the proposed method is demonstrated with the help of 32-node test system.

  12. Design of Quiet Rotorcraft Approach Trajectories

    Science.gov (United States)

    Padula, Sharon L.; Burley, Casey L.; Boyd, D. Douglas, Jr.; Marcolini, Michael A.

    2009-01-01

    A optimization procedure for identifying quiet rotorcraft approach trajectories is proposed and demonstrated. The procedure employs a multi-objective genetic algorithm in order to reduce noise and create approach paths that will be acceptable to pilots and passengers. The concept is demonstrated by application to two different helicopters. The optimized paths are compared with one another and to a standard 6-deg approach path. The two demonstration cases validate the optimization procedure but highlight the need for improved noise prediction techniques and for additional rotorcraft acoustic data sets.

  13. Design Considerations. An Interior Architectural Design Approach to Interiors

    Science.gov (United States)

    Sawyer, William C.

    1971-01-01

    The State University Construction Fund, utilizing the nation's top professional talents, must design by contract, within fixed budgets and strict time schedules, quality architecture for 32 campuses in New York State. (Author)

  14. Thomas Mofolo's sentence design in Chaka approached in translation

    African Journals Online (AJOL)

    Thomas Mofolo's sentence design in Chaka approached in translation. ... by responding to several compelling questions, ranging from how five translators of the work approached it in their respective languages ... AJOL African Journals Online.

  15. Designing products with added emotional value : development and application of an approach for research through design

    NARCIS (Netherlands)

    Desmet, P.M.A.; Overbeeke, C.J.; Tax, S.J.E.T.

    2001-01-01

    In this paper, a design approach is introduced for designing products with added emotional value. First, the approach was established, based on a theoretical framework and a non-verbal instrument to measure emotional responses. Second, the value of the design approach was assessed by applying it to

  16. Integrated Approach to Industrial Packaging Design

    Science.gov (United States)

    Vorobeva, O.

    2017-11-01

    The article reviews studies in the field of industrial packaging design. The major factors which influence technological, ergonomic, economic and ecological features of packaging are established. The main modern trends in packaging design are defined, the principles of marketing communications and their influence on consumers’ consciousness are indicated, and the function of packaging as a transmitter of brand values is specified. Peculiarities of packaging technology and printing techniques in modern printing industry are considered. The role of designers in the stage-by-stage development of the construction, form and graphic design concept of packaging is defined. The examples of authentic packaging are given and the mention of the tetrahedron packaging history is made. At the end of the article, conclusions on the key research aspects are made.

  17. Ergonomic approach for pillow concept design.

    Science.gov (United States)

    Cai, Dengchuan; Chen, Hsiao-Lin

    2016-01-01

    Sleep quality is an essential factor to human beings for health. The current paper conducted four studies to provide a suitable pillow for promoting sleep quality. Study 1 investigated the natural positions of 40 subjects during sleep to derive key-points for a pillow design. The results suggested that the supine and lateral positions were alternatively 24 times a night, and the current pillows were too high for the supine position and too low for lateral positions. Study 2 measured body dimensions related to pillow design of 40 subjects to determine pillow sizes. The results suggested that the pillow height were quite different in supine position and lateral position and needed to take into consideration for a pillow design. Study 3 created a pillow design based on the results of above studies. The pillow was a U-form in the front of view in which the pillow height in the middle area was lower for the supine position, and both sides were higher for the lateral positions. Study 4 assessed sleep quality of 6 subjects by using the proposed pillows and the current pillows. The results showed that the newly designed pillow led to significantly higher sleep quality, and the new design received an innovation patent. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  18. Power magnetic devices a multi-objective design approach

    CERN Document Server

    Sudhoff, Scott D

    2014-01-01

    Presents a multi-objective design approach to the many power magnetic devices in use today Power Magnetic Devices: A Multi-Objective Design Approach addresses the design of power magnetic devices-including inductors, transformers, electromagnets, and rotating electric machinery-using a structured design approach based on formal single- and multi-objective optimization. The book opens with a discussion of evolutionary-computing-based optimization. Magnetic analysis techniques useful to the design of all the devices considered in the book are then set forth. This material is then used for ind

  19. Designing with ethnography : an integrative approach to CSCW design

    NARCIS (Netherlands)

    Iqbal, Rahat; James, A.; Gatward, R.

    2005-01-01

    This paper presents a part of wider research endeavor within the field of Computer Supported Cooperative Work (CSCW) to leverage the use of ethnography for systems design. It investigates the role of ethnography in the development of CSCW systems and its relevance to real world problems,

  20. Negotiating Collaborative Governance Designs: A Discursive Approach

    DEFF Research Database (Denmark)

    Plotnikof, Mie

    2015-01-01

    This article addresses the design and implementation issues of collaborative governance, a public-management practice aimed at involving stakeholders in problem solving and public innovation. Although aspects of for example stakeholder inclusion and power are conceptualized in the literature......, these issues remain challenging in practice. Therefore, the interest in understanding the emerging processes of collaborative governance is growing. This article contributes to theorizing discursive aspects of such processes by conceptualizing and exploring the meaning negotiations through which collaborative...... governance designs emerge and change. The findings of a case study of local governments’ efforts to innovate quality management in education through collaborative governance suggest that such form of governance is continuingly negotiated in communication during both design and implementation phases. Through...

  1. Systems engineering approach to preconceptual design

    International Nuclear Information System (INIS)

    1981-01-01

    Steps in the typical pre-conceptual engineering study are: problem identification, identify alternatives, evaluate alternatives, and recommend solution. Three examples of the use of pre-conceptual approach to save money are given; they include the water supply for fire protection in the 200-West Area of Hanford, emergency power for the Purex plant, and new filter for the Purex plant canyon exhaust

  2. DEM Calibration Approach: design of experiment

    Science.gov (United States)

    Boikov, A. V.; Savelev, R. V.; Payor, V. A.

    2018-05-01

    The problem of DEM models calibration is considered in the article. It is proposed to divide models input parameters into those that require iterative calibration and those that are recommended to measure directly. A new method for model calibration based on the design of the experiment for iteratively calibrated parameters is proposed. The experiment is conducted using a specially designed stand. The results are processed with technical vision algorithms. Approximating functions are obtained and the error of the implemented software and hardware complex is estimated. The prospects of the obtained results are discussed.

  3. A Physical Approach to Tangible Interaction Design

    DEFF Research Database (Denmark)

    Jensen, Mads Vedel

    2007-01-01

    The field of tangible interaction is growing in rich and diverse directions calling for new forms of understanding. In this paper I will present a view on tangible interaction that has a strong focus on movement and interaction qualities. I will describe a design exercise that transfers interaction...... qualities identified from user observations made in particular contexts to the design of new interaction modalities. The exercise was completed with 16 graduate students and resulted in a set of interactive sculptures that aim to convey particular interaction experiences. I will introduce the process...

  4. Food product design. An integrated approach

    NARCIS (Netherlands)

    Linnemann, A.R.; Boekel, van M.A.J.S.

    2007-01-01

    This book explains how to apply barrier technology in food production to improve product stability and the possibilities of modelling and statistics in food product design are elaborated. Attention is given to Life Cycle Assessment as a method to determine the environmental impact of a food from

  5. An Australian Approach to School Design

    Science.gov (United States)

    Robinson, Leigh; Robinson, Taylor

    2009-01-01

    Contemporary education design strongly emphasises stimulating, adaptable learning environments, with spaces able to support various styles of teaching and learning. Delivering successful school buildings requires a close collaborative relationship between the architect and all key stakeholders from initial briefing through to project handover. The…

  6. Service registry design: an information service approach

    NARCIS (Netherlands)

    Ferreira Pires, Luis; Wang, J.; van Oostrum, Arjen; Wijnhoven, Alphonsus B.J.M.

    2010-01-01

    A service registry is a Service-Oriented Architecture (SOA) component that keeps a ‘catalogue’ of available services. It stores service specifications so that these specifications can be found by potential users. Discussions on the design of service registries currently focus on technical issues,

  7. Modularity Design Approach for Preventive Machine Maintenance

    Science.gov (United States)

    Ernawati, D.; Pudji, E.; Ngatilah, Y.; Handoyo, R.

    2018-01-01

    In a company, machine maintenance system will be very influential in production process activity. The company should have a scheduled engine maintenance system that does not require high costs when repairing and replacing machine parts. Modularity Design method is able to provide solutions to the engine maintenance scheduling system and can prevent fatal damage to the engine components. It can minimize the cost of repair and replacement of these machine components.The paper provides a solution to machine maintenance problems. The paper is also completed with case study of milling machines. That case studies can give us a real description about impact implementation of modularity design to prevent fatal damage to components and minimize the cost of repair and replacement of components of the machine.

  8. Statistical experimental design approach in coal briquetting

    Energy Technology Data Exchange (ETDEWEB)

    B. Salopek; S. Pfaff; R. Rajic

    2003-07-01

    The influence of pressure, temperature, humidity and granulation of the coal upon the resistance to pressure and the water absorption of the briquettes has been tested, with the aim to examine how each of the two dependent variables changes depending on the values assumed by any of the four independent variables and which of the mentioned independent variables significantly influences the dependent ones. The full factorial design with 16 experiments and the central composite design with 27 experiments have been applied. The influence of the independent variables upon the dependent ones has been examined by applying the analysis of variance. The influence values of individual factors and their interaction upon the dependent variables have been stated as well as coefficients of curvilinear equation. 2 refs., 2 figs., 5 tabs.

  9. Calculational approach to ionization spectrometer design

    International Nuclear Information System (INIS)

    Gabriel, T.A.

    1974-01-01

    Many factors contribute to the design and overall performance of an ionization spectrometer. These factors include the conditions under which the spectrometer is to be used, the required performance, the development of the hadronic and electromagnetic cascades, leakage and binding energies, saturation effects of densely ionizing particles, nonuniform light collection, sampling fluctuations, etc. The calculational procedures developed at Oak Ridge National Laboratory that have been applied to many spectrometer designs and that include many of the influencing factors in spectrometer design are discussed. The incident-particle types which can be considered with some generality are protons, neutrons, pions, muons, electrons, positrons, and gamma rays. Charged kaons can also be considered but with less generality. The incident-particle energy range can extend into the hundreds of GeV range. The calculations have been verified by comparison with experimental data but only up to approximately 30 GeV. Some comparisons with experimental data are also discussed and presented so that the flexibility of the calculational methods can be demonstrated. (U.S.)

  10. Magnet design approach for pulsed tokamak reactors

    International Nuclear Information System (INIS)

    Kim, S.H.; Evans, K. Jr.; Ehst, D.A.

    1983-12-01

    A choice of various operating modes of a tokamak reactor will have considerable impact on the fatigue lives and cost of ohmic heating (OH), equilibrium field (EF), and toroidal field (TF) coils. OH AND EF coil requirements and their costs, as well as the effects of the fringing fields of the EF coils on the TF coils, have been studied under cyclic operation in the range of N = 10 2 to 10 6 cycles, spanning the range from a noninductively driven reactor (STARFIRE) to a conventional ohmically driven reactor. For a reference design of TF coils the design of the central OH solenoid has been studied as a function of its maximum field, B/sup OH/. Increasing requirements for structural support lead to only negligible increases in volt-seconds for B/sup OH/ greater than or equal to 10.0 T. Fatigue failure of the OH coil is not a concern for N less than or equal to 10 5 ; for N approx. 10 6 fatigue limits the strain to small values, resulting in small increases in structural requirements and modest decreases in volt-seconds. Should noninductive current drive be achievable we note that this not only eliminates the OH coil, but it also permits EF coil placement in the inboard region, which facilitates the creation of highly shaped plasma cross sections (large triangularity, or bean-shaped equilibria). We have computed the stored energy, coil configuration and fringing fields for a number of EF coil design options

  11. Investigating design: A comparison of manifest and latent approaches

    DEFF Research Database (Denmark)

    Cash, Philip; Snider, Chris

    2014-01-01

    This paper contributes to the on-going focus on improving design research methods, by exploring and synthesising two key interrelated research approaches e manifest and latent. These approaches are widely used individually in design research, however, this paper represents the first work bringing...

  12. Approaches to Integrated Building Design Environments

    DEFF Research Database (Denmark)

    Bagger-Petersen, Susanne C; Andersen, Tom

    1996-01-01

    This report discusses functional requirements and specification which needs to be defined and fulfilled to initiate development of an integrated building design environment. The purpose is to outline specifications for further discussion and development. The report documents the first phase...... in an ongoing project at the Technical University of Denmark. The overall project objective is to provide a theoretically well-founded prototype of an integrated IT-system which can serve as a device of feedback from practice and as a test-bed for the developed concept and architecture....

  13. Service design as an approach for recognizing blue ocean

    OpenAIRE

    Koskelo, Minna

    2013-01-01

    This thesis aims to show that service design as an approach can be utilized for discovering new market space, referred as blue ocean and new business opportunities, and thus to show that service design can be seen as an approach for bringing the new logic for value creation into strategic level. From the field of strategic management the theory of blue ocean strategy was chosen for presenting the strategic outcome and further since there are similarities be-tween blue ocean strategy approach ...

  14. A user-oriented and quantifiable approach to irrigation design.

    NARCIS (Netherlands)

    Baars, E.; Bastiaansen, A.P.M.; Menenti, M.

    1995-01-01

    A new user-oriented approach is presented to apply marketing research techniques to quantify perceptions, preferences and utility values of farmers. This approach was applied to design an improved water distribution method for an irrigation scheme in Mendoza, Argentina. The approach comprises two

  15. Viable Syntax: Rethinking Minimalist Architecture

    Directory of Open Access Journals (Sweden)

    Ken Safir

    2010-03-01

    Full Text Available Hauser et al. (2002 suggest that the human language faculty emerged as a genetic innovation in the form of what is called here a ‘keystone factor’—a single, simple, formal mental capability that, interacting with the pre-existing faculties of hominid ancestors, caused a cascade of effects resulting in the language faculty in modern humans. They take Merge to be the keystone factor, but instead it is posited here that Merge is the pre-existing mechanism of thought made viable by a principle that permits relations interpretable at the interfaces to be mapped onto c-command. The simplified minimalist architecture proposed here respects the keystone factor as closely as possible, but is justified on the basis of linguistic analyses it makes available, including a relativized intervention theory applicable across Case, scope, agreement, selection and linearization, a derivation of the A/A’-distinction from Case theory, and predictions such as why in situ wh-interpretation is island-insensitive, but susceptible to intervention effects.

  16. Controller design approach based on linear programming.

    Science.gov (United States)

    Tanaka, Ryo; Shibasaki, Hiroki; Ogawa, Hiromitsu; Murakami, Takahiro; Ishida, Yoshihisa

    2013-11-01

    This study explains and demonstrates the design method for a control system with a load disturbance observer. Observer gains are determined by linear programming (LP) in terms of the Routh-Hurwitz stability criterion and the final-value theorem. In addition, the control model has a feedback structure, and feedback gains are determined to be the linear quadratic regulator. The simulation results confirmed that compared with the conventional method, the output estimated by our proposed method converges to a reference input faster when a load disturbance is added to a control system. In addition, we also confirmed the effectiveness of the proposed method by performing an experiment with a DC motor. © 2013 ISA. Published by ISA. All rights reserved.

  17. Correct-by-construction approaches for SoC design

    CERN Document Server

    Sinha, Roopak; Basu, Samik

    2013-01-01

    This book describes an approach for designing Systems-on-Chip such that the system meets precise mathematical requirements. The methodologies presented enable embedded systems designers to reuse intellectual property (IP) blocks from existing designs in an efficient, reliable manner, automatically generating correct SoCs from multiple, possibly mismatching, components.

  18. Sustainable Design Approach: A case study of BIM use

    Science.gov (United States)

    Abdelhameed, Wael

    2017-11-01

    Achieving sustainable design in areas such as energy-efficient design depends largely on the accuracy of the analysis performed after the design is completed with all its components and material details. There are different analysis approaches and methods that predict relevant values and metrics such as U value, energy use and energy savings. Although certain differences in the accuracy of these approaches and methods have been recorded, this research paper does not focus on such matter, where determining the reason for discrepancies between those approaches and methods is difficult, because all error sources act simultaneously. The research paper rather introduces an approach through which BIM, building information modelling, can be utilised during the initial phases of the designing process, by analysing the values and metrics of sustainable design before going into the design details of a building. Managing all of the project drawings in a single file, BIM -building information modelling- is well known as one digital platform that offers a multidisciplinary detailed design -AEC model (Barison and Santos, 2010, Welle et.al., 2011). The paper presents in general BIM use in the early phases of the design process, in order to achieve certain required areas of sustainable design. The paper proceeds to introduce BIM use in specific areas such as site selection, wind velocity and building orientation, in terms of reaching the farther possible sustainable solution. In the initial phases of designing, material details and building components are not fully specified or selected yet. The designer usually focuses on zoning, topology, circulations, and other design requirements. The proposed approach employs the strategies and analysis of BIM use during those initial design phases in order to have the analysis and results of each solution or alternative design. The stakeholders and designers would have a better effective decision making process with a full clarity of each

  19. Mechatronic System Design Based On An Optimisation Approach

    DEFF Research Database (Denmark)

    Andersen, Torben Ole; Pedersen, Henrik Clemmensen; Hansen, Michael Rygaard

    The envisaged objective of this paper project is to extend the current state of the art regarding the design of complex mechatronic systems utilizing an optimisation approach. We propose to investigate a novel framework for mechatronic system design. The novelty and originality being the use...... of optimisation techniques. The methods used to optimise/design within the classical disciplines will be identified and extended to mechatronic system design....

  20. Cork Design : A Design Action Intervention Approach Towards Sustainable Product Innovation

    NARCIS (Netherlands)

    Mestre, A.C.C.M.

    2014-01-01

    The study Cork Design: A Design Action Intervention Approach Towards Sustainable Product Innovation comprises the systematic implementation of sustainable product innovation within the Portuguese cork sector, through action research. Cork is a natural, recyclable, non-toxic, and renewable resource,

  1. From a Disciplinary to an Interdisciplinary Design Research: Developing an Integrative Approach for Design

    Science.gov (United States)

    Chou, Wen Huei; Wong, Ju-Joan

    2015-01-01

    As the new generation of designers face more complex design issues, the forms of design research start to shift towards a user-centred approach to problem-solving. The cooperation and communication among various fields and specialisations are becoming more complex; in many practical design cases, in particular, technology developers face…

  2. Franz Kafka in the Design Studio: A Hermeneutic-Phenomenological Approach to Architectural Design Education

    Science.gov (United States)

    Hisarligil, Beyhan Bolak

    2012-01-01

    This article demonstrates the outcomes of taking a hermeneutic phenomenological approach to architectural design and discusses the potentials for imaginative reasoning in design education. This study tests the use of literature as a verbal form of art and design and the contribution it can make to imaginative design processes--which are all too…

  3. Integration of case study approach, project design and computer ...

    African Journals Online (AJOL)

    Integration of case study approach, project design and computer modeling in managerial accounting education ... Journal of Fundamental and Applied Sciences ... in the Laboratory of Management Accounting and Controlling Systems at the ...

  4. A Design Thinking Approach to Teaching Knowledge Management

    Science.gov (United States)

    Wang, Shouhong; Wang, Hai

    2008-01-01

    Pedagogies for knowledge management courses are still undeveloped. This Teaching Tip introduces a design thinking approach to teaching knowledge management. An induction model used to guide students' real-life projects for knowledge management is presented. (Contains 1 figure.)

  5. A Statistical Approach to Optimizing Concrete Mixture Design

    OpenAIRE

    Ahmad, Shamsad; Alghamdi, Saeid A.

    2014-01-01

    A step-by-step statistical approach is proposed to obtain optimum proportioning of concrete mixtures using the data obtained through a statistically planned experimental program. The utility of the proposed approach for optimizing the design of concrete mixture is illustrated considering a typical case in which trial mixtures were considered according to a full factorial experiment design involving three factors and their three levels (33). A total of 27 concrete mixtures with three replicate...

  6. Seeking Constructive Synergy: Design Science and the Constructive Research Approach

    DEFF Research Database (Denmark)

    Piirainen, Kalle; Gonzalez, Rafael A.

    2013-01-01

    Information systems research and management science create knowledge which can be applied in organizations. Design science specifically aims at applying existing knowledge to solve interesting and relevant business problems and has been steadily gaining support in information systems research....... However, design science is not the only design-oriented framework. Accordingly, this raises the question of whether it is possible to compare the results obtained from different brands of design-oriented research. This paper contributes to answering this question by comparing two research approaches......, enabling mutual learning possibilities and suggesting improvements in transparency and rigor. The objective of this paper is to compare design science research with the constructive research approach. The conclusion is that the two approaches are compatible, save for details in practical requirements...

  7. Design of efficient and safe neural stimulators a multidisciplinary approach

    CERN Document Server

    van Dongen, Marijn

    2016-01-01

    This book discusses the design of neural stimulator systems which are used for the treatment of a wide variety of brain disorders such as Parkinson’s, depression and tinnitus. Whereas many existing books treating neural stimulation focus on one particular design aspect, such as the electrical design of the stimulator, this book uses a multidisciplinary approach: by combining the fields of neuroscience, electrophysiology and electrical engineering a thorough understanding of the complete neural stimulation chain is created (from the stimulation IC down to the neural cell). This multidisciplinary approach enables readers to gain new insights into stimulator design, while context is provided by presenting innovative design examples. Provides a single-source, multidisciplinary reference to the field of neural stimulation, bridging an important knowledge gap among the fields of bioelectricity, neuroscience, neuroengineering and microelectronics;Uses a top-down approach to understanding the neural activation proc...

  8. Multifaceted Approach to Designing an Online Masters Program.

    Science.gov (United States)

    McNeil, Sara G.; Chernish, William N.; DeFranco, Agnes L.

    At the Conrad N. Hilton College of Hotel and Restaurant Management at the University of Houston (Texas), the faculty and administrators made a conscious effort to take a broad, extensive approach to designing and implementing a fully online masters program. This approach was entered in a comprehensive needs assessment model and sought input from…

  9. A Topology Optimisation Approach to Learning in Architectural Design

    DEFF Research Database (Denmark)

    Mullins, Michael; Kirkegaard, Poul Henning; Jessen, Rasmus Zederkof

    2005-01-01

    describes an attempt to unify analytic and analogical approaches in an architectural education setting, using topology optimization software. It uses as examples recent student projects where the architectural design process based on a topology optimization approach has been investigated. The paper...

  10. Mathematical-programming approaches to test item pool design

    NARCIS (Netherlands)

    Veldkamp, Bernard P.; van der Linden, Willem J.; Ariel, A.

    2002-01-01

    This paper presents an approach to item pool design that has the potential to improve on the quality of current item pools in educational and psychological testing andhence to increase both measurement precision and validity. The approach consists of the application of mathematical programming

  11. Design science research as research approach in doctoral studies

    CSIR Research Space (South Africa)

    Kotzé, P

    2015-08-01

    Full Text Available Since the use of design science research (DSR) gained momentum as a research approach in information systems (IS), the adoption of a DSR approach in postgraduate studies became more acceptable. This paper reflects on a study to investigate how a...

  12. Conjecture Mapping: An Approach to Systematic Educational Design Research

    Science.gov (United States)

    Sandoval, William

    2014-01-01

    Design research is strongly associated with the learning sciences community, and in the 2 decades since its conception it has become broadly accepted. Yet within and without the learning sciences there remains confusion about how to do design research, with most scholarship on the approach describing what it is rather than how to do it. This…

  13. Mobile Autonomous Robot Twente, a mechatronics design approach

    NARCIS (Netherlands)

    Schipper, Denis Alexander; Schipper, D.A.

    2001-01-01

    The main question of this thesis is how the different skills and disciplines involved can be combined to fully exploit the potential of a mechatronics design approach. The choice made was to gain experience in the field of mechatronics design by developing a technical system of high complexity,

  14. The FITS model: an improved Learning by Design approach

    NARCIS (Netherlands)

    Drs. Ing. Koen Michels; Prof. Dr. Marc de Vries; MEd Dave van Breukelen; MEd Frank Schure

    2016-01-01

    Learning by Design (LBD) is a project-based inquiry approach for interdisciplinary teaching that uses design contexts to learn skills and conceptual knowledge. Research around the year 2000 showed that LBD students achieved high skill performances but disappointing conceptual learning gains. A

  15. Implementing Project Based Learning Approach to Graphic Design Course

    Science.gov (United States)

    Riyanti, Menul Teguh; Erwin, Tuti Nuriah; Suriani, S. H.

    2017-01-01

    The purpose of this study was to develop a learning model based Commercial Graphic Design Drafting project-based learning approach, was chosen as a strategy in the learning product development research. University students as the target audience of this model are the students of the fifth semester Visual Communications Design Studies Program…

  16. An Agent Based approach to design Serious Game

    Directory of Open Access Journals (Sweden)

    Manuel Gentile

    2014-06-01

    Full Text Available Serious games are designed to train and educate learners, opening up new learning approaches like exploratory learning and situated cognition.  Despite growing interest in these games, their design is still an artisan process.On the basis of experiences in designing computer simulation, this paper proposes an agent-based approach to guide the design process of a serious game. The proposed methodology allows the designer to strike the right equilibrium between educational effectiveness and entertainment, realism and complexity.The design of the PNPVillage game is used as a case study. The PNPVillage game aims to introduce and foster an entrepreneurial mindset among young students. It was implemented within the framework of the European project “I  can… I cannot… I go!” Rev.2

  17. Polynomial fuzzy observer designs: a sum-of-squares approach.

    Science.gov (United States)

    Tanaka, Kazuo; Ohtake, Hiroshi; Seo, Toshiaki; Tanaka, Motoyasu; Wang, Hua O

    2012-10-01

    This paper presents a sum-of-squares (SOS) approach to polynomial fuzzy observer designs for three classes of polynomial fuzzy systems. The proposed SOS-based framework provides a number of innovations and improvements over the existing linear matrix inequality (LMI)-based approaches to Takagi-Sugeno (T-S) fuzzy controller and observer designs. First, we briefly summarize previous results with respect to a polynomial fuzzy system that is a more general representation of the well-known T-S fuzzy system. Next, we propose polynomial fuzzy observers to estimate states in three classes of polynomial fuzzy systems and derive SOS conditions to design polynomial fuzzy controllers and observers. A remarkable feature of the SOS design conditions for the first two classes (Classes I and II) is that they realize the so-called separation principle, i.e., the polynomial fuzzy controller and observer for each class can be separately designed without lack of guaranteeing the stability of the overall control system in addition to converging state-estimation error (via the observer) to zero. Although, for the last class (Class III), the separation principle does not hold, we propose an algorithm to design polynomial fuzzy controller and observer satisfying the stability of the overall control system in addition to converging state-estimation error (via the observer) to zero. All the design conditions in the proposed approach can be represented in terms of SOS and are symbolically and numerically solved via the recently developed SOSTOOLS and a semidefinite-program solver, respectively. To illustrate the validity and applicability of the proposed approach, three design examples are provided. The examples demonstrate the advantages of the SOS-based approaches for the existing LMI approaches to T-S fuzzy observer designs.

  18. PGT: A Statistical Approach to Prediction and Mechanism Design

    Science.gov (United States)

    Wolpert, David H.; Bono, James W.

    One of the biggest challenges facing behavioral economics is the lack of a single theoretical framework that is capable of directly utilizing all types of behavioral data. One of the biggest challenges of game theory is the lack of a framework for making predictions and designing markets in a manner that is consistent with the axioms of decision theory. An approach in which solution concepts are distribution-valued rather than set-valued (i.e. equilibrium theory) has both capabilities. We call this approach Predictive Game Theory (or PGT). This paper outlines a general Bayesian approach to PGT. It also presents one simple example to illustrate the way in which this approach differs from equilibrium approaches in both prediction and mechanism design settings.

  19. Parametric Approach in Designing Large-Scale Urban Architectural Objects

    Directory of Open Access Journals (Sweden)

    Arne Riekstiņš

    2011-04-01

    Full Text Available When all the disciplines of various science fields converge and develop, new approaches to contemporary architecture arise. The author looks towards approaching digital architecture from parametric viewpoint, revealing its generative capacity, originating from the fields of aeronautical, naval, automobile and product-design industries. The author also goes explicitly through his design cycle workflow for testing the latest methodologies in architectural design. The design process steps involved: extrapolating valuable statistical data about the site into three-dimensional diagrams, defining certain materiality of what is being produced, ways of presenting structural skin and structure simultaneously, contacting the object with the ground, interior program definition of the building with floors and possible spaces, logic of fabrication, CNC milling of the proto-type. The author’s developed tool that is reviewed in this article features enormous performative capacity and is applicable to various architectural design scales.Article in English

  20. On-Chip Dielectrophoretic Separation and Concentration of Viable, Non-Viable and Viable but Not Culturable (VBNC) Escherichia coli

    Energy Technology Data Exchange (ETDEWEB)

    Packard, M M; Shusteff, M; Alocilja, E C

    2012-04-12

    Although bacterial culture remains the gold standard for detection of viable bacteria in environmental specimens, the typical time requirement of twenty-four hours can delay and even jeopardize appropriate public health intervention. In addition, culture is incapable of detecting viable but not culturable (VBNC) species. Conversely, nucleic acid and antibody-based methods greatly decrease time to detection but rarely characterize viability of the bacteria detected. Through selection by membrane permeability, the method described in this work employs positive dielectrophoresis (pDEP) for separation and purification of viable and VBNC species from water and allows concentration of bacteria for downstream applications.

  1. Assessment of Algal Farm Designs Using a Dynamic Modular Approach

    Energy Technology Data Exchange (ETDEWEB)

    Abodeely, Jared [Idaho National Laboratory (INL), Idaho Falls, ID (United States). Biofuels and Renewable Energy Technology; Coleman, Andre M. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States). Hydrology Technical Group; Stevens, Daniel M. [Idaho National Laboratory (INL), Idaho Falls, ID (United States). Biofuels and Renewable Energy Technology; Ray, Allison E. [Idaho National Laboratory (INL), Idaho Falls, ID (United States). Biofuels and Renewable Energy Technology; Cafferty, Kara G. [Idaho National Laboratory (INL), Idaho Falls, ID (United States). Biofuels and Renewable Energy Technology; Newby, Deborah T. [Idaho National Laboratory (INL), Idaho Falls, ID (United States). Biofuels and Renewable Energy Technology

    2014-07-01

    The notion of renewable energy provides an important mechanism for diversifying an energy portfolio, which ultimately would have numerous benefits including increased energy resilience, reduction of foreign energy supplies, reduced GHG emissions, development of a green energy sector that contributes to economic growth, and providing a sustainable energy supply. The conversion of autotrophic algae to liquid transportation fuels is the basis of several decades of research to competitively bring energy-scale production into reality; however, many challenges still remain for making algal biofuels economically viable. Addressing current challenges associated with algal production systems, in part, requires the ability to assess spatial and temporal variability, rapidly evaluate alternative algal production system designs, and perform large-scale assessments considering multiple scenarios for thousands of potential sites. We introduce the Algae Logistics Model (ALM) which helps to address these challenges. The flexible nature of the ALM architecture allows the model to: 1) interface with external biomass production and resource assessment models, as well as other relevant datasets including those with spatiotemporal granularity; 2) interchange design processes to enable operational and economic assessments of multiple design configurations, including the integration of current and new innovative technologies; and 3) conduct trade-off analysis to help understand the site-specific techno-economic trade-offs and inform technology decisions. This study uses the ALM to investigate a baseline open-pond production system determined by model harmonization efforts conducted by the U.S. Department of Energy. Six sites in the U.S. southern-tier were sub-selected and assessed using daily site-specific algae biomass productivity data to determine the economic viability of large-scale open-pond systems. Results show that costs can vary significantly depending on location and biomass

  2. LMI–based robust controller design approach in aircraft multidisciplinary design optimization problem

    Directory of Open Access Journals (Sweden)

    Qinghua Zeng

    2015-07-01

    Full Text Available This article proposes a linear matrix inequality–based robust controller design approach to implement the synchronous design of aircraft control discipline and other disciplines, in which the variation in design parameters is treated as equivalent perturbations. Considering the complicated mapping relationships between the coefficient arrays of aircraft motion model and the aircraft design parameters, the robust controller designed is directly based on the variation in these coefficient arrays so conservative that the multidisciplinary design optimization problem would be too difficult to solve, or even if there is a solution, the robustness of design result is generally poor. Therefore, this article derives the uncertainty model of disciplinary design parameters based on response surface approximation, converts the design problem of the robust controller into a problem of solving a standard linear matrix inequality, and theoretically gives a less conservative design method of the robust controller which is based on the variation in design parameters. Furthermore, the concurrent subspace approach is applied to the multidisciplinary system with this kind of robust controller in the design loop. A multidisciplinary design optimization of a tailless aircraft as example is shown that control discipline can be synchronous optimal design with other discipline, especially this method will greatly reduce the calculated amount of multidisciplinary design optimization and make multidisciplinary design optimization results more robustness of flight performance.

  3. Virtual Reality as Innovative Approach to the Interior Designing

    Science.gov (United States)

    Kaleja, Pavol; Kozlovská, Mária

    2017-06-01

    We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

  4. Bimetric gravity is cosmologically viable

    Directory of Open Access Journals (Sweden)

    Yashar Akrami

    2015-09-01

    Full Text Available Bimetric theory describes gravitational interactions in the presence of an extra spin-2 field. Previous work has suggested that its cosmological solutions are generically plagued by instabilities. We show that by taking the Planck mass for the second metric, Mf, to be small, these instabilities can be pushed back to unobservably early times. In this limit, the theory approaches general relativity with an effective cosmological constant which is, remarkably, determined by the spin-2 interaction scale. This provides a late-time expansion history which is extremely close to ΛCDM, but with a technically-natural value for the cosmological constant. We find Mf should be no larger than the electroweak scale in order for cosmological perturbations to be stable by big-bang nucleosynthesis. We further show that in this limit the helicity-0 mode is no longer strongly-coupled at low energy scales.

  5. A dual model approach to ground water recovery trench design

    International Nuclear Information System (INIS)

    Clodfelter, C.L.; Crouch, M.S.

    1992-01-01

    The design of trenches for contaminated ground water recovery must consider several variables. This paper presents a dual-model approach for effectively recovering contaminated ground water migrating toward a trench by advection. The approach involves an analytical model to determine the vertical influence of the trench and a numerical flow model to determine the capture zone within the trench and the surrounding aquifer. The analytical model is utilized by varying trench dimensions and head values to design a trench which meets the remediation criteria. The numerical flow model is utilized to select the type of backfill and location of sumps within the trench. The dual-model approach can be used to design a recovery trench which effectively captures advective migration of contaminants in the vertical and horizontal planes

  6. How can design approaches be integrated into entrepreneurship education?

    DEFF Research Database (Denmark)

    Færgemann, Helle Meibom; Nørgård, Rikke Toft; Robinson, Sarah

    reflection about the intention and how the elements fit with the entrepreneurship field. The proposed process model presented (Fig 3) primarily has potential to strengthen the awareness of the need to alternate between divergence and convergence many times through an entrepreneurial process. Apart from......Questions we care about: When educating students through entrepreneurship we are interested in how can design approaches and processes be integrated into Entrepreneurship Education and what effect does this have on entrepreneurial learning? Approach: This is a conceptual paper which draws on data...... from a classic entrepreneurship course (mix of for- and through-approach) as well as a classic design course. Furthermore data from the iterative development of an entrepreneurship course with substantial design elements is a key data source. Overall, products and processes in the course have been...

  7. Computer based approach to fatigue analysis and design

    International Nuclear Information System (INIS)

    Comstock, T.R.; Bernard, T.; Nieb, J.

    1979-01-01

    An approach is presented which uses a mini-computer based system for data acquisition, analysis and graphic displays relative to fatigue life estimation and design. Procedures are developed for identifying an eliminating damaging events due to overall duty cycle, forced vibration and structural dynamic characteristics. Two case histories, weld failures in heavy vehicles and low cycle fan blade failures, are discussed to illustrate the overall approach. (orig.) 891 RW/orig. 892 RKD [de

  8. Conceptual design of jewellery: a space-based aesthetics approach

    Directory of Open Access Journals (Sweden)

    Tzintzi Vaia

    2017-01-01

    Full Text Available Conceptual design is a field that offers various aesthetic approaches to generation of nature-based product design concepts. Essentially, Conceptual Product Design (CPD uses similarities based on the geometrical forms and functionalities. Furthermore, the CAD-based freehand sketch is a primary conceptual tool in the early stages of the design process. The proposed Conceptual Product Design concept is dealing with jewelleries that are inspired from space. Specifically, a number of galaxy features, such as galaxy shapes, wormholes and graphical representation of planet magnetic field are used as inspirations. Those space-based design ideas at a conceptual level can lead to further opportunities for research and economic success of the jewellery industry. A number of illustrative case studies are presented and new opportunities can be derived for economic success.

  9. An Approach to Design of Power-Mechatronic Systems

    DEFF Research Database (Denmark)

    Andersen, T. O.; Hansen, M. R.; Conrad, Finn

    2003-01-01

    successful mechatronic engineers. The paper presents and discusses new mechtonic design approach and design methods anr IT-Tools used to demonstrate such approach and IT-Tool for modelling, simulation and control useful in analysis, synthesis, design and application of mechatronic systems with fluid power......The paper focus on today´s, cost-effective electronics, microcomputers, and digital signal processors have brought new advanced technology to appliances and consumer products. Systems with precision sensors and actuators have increased performance by order of magnitude over what was once possible....... The paper discusses what set these new, high-performance, cost-effective systems and devices apart from those of the past? Is it more than just technological advancement? There are many designs where electronics and control are combined with mechanical components, but with very little synergy and poor...

  10. Stimulating Thinking at the Design Pitch: Storytelling Approach and Impact

    OpenAIRE

    Parkinson, David; Warwick, Laura

    2017-01-01

    This paper presents findings from doctoral research to propose that next, we should look to understand storytelling at the design pitch in terms of the relationship between approaches taken and their impacts. A review of literature highlighted the following as desirable impacts for a design pitch: ‘Delivering Understanding’, ‘Demonstrating Value’, ‘Stimulating Critique’, and ‘Encouraging more Holistic Thinking’. These impacts were used to focus a series of semi-structured interviews conducted...

  11. Triangulation based inclusion probabilities: a design-unbiased sampling approach

    OpenAIRE

    Fehrmann, Lutz; Gregoire, Timothy; Kleinn, Christoph

    2011-01-01

    A probabilistic sampling approach for design-unbiased estimation of area-related quantitative characteristics of spatially dispersed population units is proposed. The developed field protocol includes a fixed number of 3 units per sampling location and is based on partial triangulations over their natural neighbors to derive the individual inclusion probabilities. The performance of the proposed design is tested in comparison to fixed area sample plots in a simulation with two forest stands. ...

  12. The FITS model: an improved Learning by Design approach

    OpenAIRE

    Michels, Koen; Vries, de, Marc; Breukelen, van, Dave; Schure, Frank

    2016-01-01

    Learning by Design (LBD) is a project-based inquiry approach for interdisciplinary teaching that uses design contexts to learn skills and conceptual knowledge. Research around the year 2000 showed that LBD students achieved high skill performances but disappointing conceptual learning gains. A series of exploratory studies, previous to the study in this paper, indicated how to enhance concept learning. Small-scale tested modifications, based on explicit teaching and scaffolding, were promisin...

  13. Service-oriented Design: A Multi-viewpoint Approach

    OpenAIRE

    Dijkman, R.M.; Dumas, M.

    2004-01-01

    As the technology associated to the ¿Web Services¿ trend gains significant adoption, the need for a corresponding design approach becomes increasingly important. This paper introduces a foundational model for designing (composite) services. The innovation of this model lies in the identification of four interrelated viewpoints (interface behaviour, provider behaviour, choreography, and orchestration) and their formalization from a control-flow perspective in terms of Petri nets. By formally c...

  14. A new approach to the design of LMFBR liners

    International Nuclear Information System (INIS)

    Polentz, L.M.

    1980-01-01

    An advance in the state-of-the-art of LMFBR liners which permits notable savings in construction costs without any sacrifice of safety is described. The application of the new design concept to the rework of the upper reactor vault liner of the FFTF is discussed. Factors which affect the application of the new design approach to other LMFBRs are delineated and discussed. (author)

  15. A Holistic Approach for Risk Management During Design

    Science.gov (United States)

    Meshkat, Leila

    2006-01-01

    In this paper, an approach for the identification, assessment, mitigation and continuous management of risks during the process of designing a space mission is presented. This approach has been developed by observing the risk patterns that occur at the Project Design Center of the Jet Propulsion Laboratory (TeamX) which develops conceptual, concurrent design of Space Missions. TeamX develops an end-to-end conceptual design of a Space Mission in a matter of one or two weeks. As the risk chair in TeamX, the author has had the opportunity to observe the risk patterns that occur during design over the course of many design sessions. This paper introduces an abstraction and generalization of those patterns. Risk is defined as anything that can go wrong, along with its approximate likelihood and consequence. The indicators, and causes, and effects of these risks are cross cutting across the multiple levels of people and processes involved in the design, and the actual design product itself.

  16. A Novel Approach for Designing Mobile Native Apps

    Directory of Open Access Journals (Sweden)

    Sasmita Pani

    2017-01-01

    Full Text Available Mobile devices are differed from desktop based systems in terms of particular execution environment, constrained resources, and high mobility requirement. To overcome these shortcomings, various agile based methodologies are developed for native mobile applications such as Mobile-D, Scrum etc. These agile techniques are based on various phases and these phases begin from exploring, initializing and implementing the mobile apps. But these techniques are not focusing on elaborating design model for mobile native apps. The aim of the paper is to provide a layered approach or layered model for design of mobile native apps which can be used as a framework for developing mobile native apps. Any mobile native app developer can use this sequential approach or design model for design and development of mobile native apps. This design model gives a standard or framework, based on which generic native mobile apps can be designed and developed. This paper also shows an empirical analysis among the web app design models with the proposed design model for mobile native app development.

  17. Developing Viable Financing Models for Space Tourism

    Science.gov (United States)

    Eilingsfeld, F.; Schaetzler, D.

    2002-01-01

    Increasing commercialization of space services and the impending release of government's control of space access promise to make space ventures more attractive. Still, many investors shy away from going into the space tourism market as long as they do not feel secure that their return expectations will be met. First and foremost, attracting investors from the capital markets requires qualifying financing models. Based on earlier research on the cost of capital for space tourism, this paper gives a brief run-through of commercial, technical and financial due diligence aspects. After that, a closer look is taken at different valuation techniques as well as alternative ways of streamlining financials. Experience from earlier ventures has shown that the high cost of capital represents a significant challenge. Thus, the sophistication and professionalism of business plans and financial models needs to be very high. Special emphasis is given to the optimization of the debt-to-equity ratio over time. The different roles of equity and debt over a venture's life cycle are explained. Based on the latter, guidelines for the design of an optimized loan structure are given. These are then applied to simulating the financial performance of a typical space tourism venture over time, including the calculation of Weighted Average Cost of Capital (WACC) and Net Present Value (NPV). Based on a concluding sensitivity analysis, the lessons learned are presented. If applied properly, these will help to make space tourism economically viable.

  18. Strengthening Agricultural Research Capacity for Viable Extension ...

    African Journals Online (AJOL)

    Strengthening Agricultural Research Capacity for Viable Extension Policies in Nigeria: An Exploration of Ricoeur's Hermeneutic Theory for Analysing Extension Research. ... Progressively more, researchers use hermeneutic philosophy to inform the conduct of interpretive research. Analogy between the philosophical ...

  19. Multi-Criteria Approach in Multifunctional Building Design Process

    Science.gov (United States)

    Gerigk, Mateusz

    2017-10-01

    The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

  20. Designing to target cost: one approach to design/construction integration

    DEFF Research Database (Denmark)

    Jørgensen, Bo

    2005-01-01

    One approach to a more integrated construction delivery process is the concept of ‘designing to target cost’ of which the first examples of application within a lean construction framework have recently been seen. This paper introduces the main principles of the design to target cost method...... and discusses the applicability of this approach to construction. The low degree of organizational and technical continuity from one construction project to the next limits the applicability of the design for target cost approach when compared to its origin in product development of mass manufactured artefacts....... It can be argued that design to target cost may also provide a frame for developing the supply chain towards better coordination and collaboration. Thus methods of design to target cost may serve to facilitate the development of a more integrated supply chain....

  1. A Core Design Approach Aimed at Sustainability and Intrinsic Safety

    International Nuclear Information System (INIS)

    Grasso, Giacomo

    2013-01-01

    The comprehensive approach adopted for the core design of all LFRs investigated within the LEADER project, proved to effectively drive the design to the fulfillment of the aimed sustainability performances, and the respect of the design constraints for the robust implementation of the inherent safety principle: • the ELFR core is able to operate adiabatically, with a very narrow reactivity swing along a 2.5 y cycle; • wide margins are provided for protecting the fuel and the structures even in case of unprotected transients, allowing for very long grace times

  2. An interdisciplinary approach to design at the University of Pretoria ...

    African Journals Online (AJOL)

    This article investigates the implementation of an interdisciplinary approach to Design in Architecture, Landscape Architecture and Interior Architecture at the University of Pretoria, South Africa. Architecture, Landscape Architecture and Interior Architecture were previously offered as distinctive academic disciplines, located ...

  3. Approach to equilibrium calculations for the dragon HTR design

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, U

    1971-06-10

    The calculational methods and the model used in representing the core and the fuel management operations are described. Different layouts of the first core and approach to equilibrium schemes for the Dragon HTR design are investigated. A simple fuelling modus is found and the tchnological and economical implications are discussed in detail.

  4. A rational approach for ω-transaminase-catalyzed process design

    DEFF Research Database (Denmark)

    T. Gundersen, Maria; Lloyd, Richard; Tufvesson, Pär

    Herein we describe a novel rational approach to the design of a ω-transaminase process such that it will fulfill criteria necessary for industrial use. By first determining the fundamental properties of the reaction system, it is possible to suggest appropriate process strategies that may be used...

  5. "Design for Somebody" - Approach Enabling Mobile Technology Development.

    Science.gov (United States)

    Sirkka, Andrew; Merilampi, Sari; Koivisto, Antti; Tommiska, Janika; Saarinen, Tatu-Pekka

    2017-01-01

    This paper presents case examples of Design for Somebody (DfS) philosophy used both in developing novel technologies and modifying existing main stream technologies applicable for users with special needs. DfS embodies variety of mobile technology approaches to generate personalised means to enable and motivate physical, cognitive and social skills development.

  6. A Pro-Forma approach to Car-Carrier Design

    CSIR Research Space (South Africa)

    Benade, R

    2016-11-01

    Full Text Available In this work a pro-forma approach is developed for assessing truck and centre-axle tag-trailer or 50/50 car-carrier designs in terms of their compliance with the South African Performance-Based Standards (PBS) pilot project requirements. First...

  7. Minimizing System Modification in an Incremental Design Approach

    DEFF Research Database (Denmark)

    Pop, Paul; Eles, Petru; Pop, Traian

    2001-01-01

    In this paper we present an approach to mapping and scheduling of distributed embedded systems for hard real-time applications, aiming at minimizing the system modification cost. We consider an incremental design process that starts from an already existing sys-tem running a set of applications. We...

  8. Collaborative design of Open Educational Practices: An Assets based approach

    Directory of Open Access Journals (Sweden)

    Kate Helen Miller

    2018-04-01

    Full Text Available This paper outlines a collaborative approach to the design of open educational resources (OER with community stakeholders so they can be shared with other community practitioners openly, online and repurposed for other contexts. We view curriculum not as something that educationalists provide but rather something that emerges as learners engage with an educational context. We draw on a Project consisting of a partnership between five European Institutions of Higher Education and a range of community stakeholder groups. The partnership will develop a suite of OER for community workers who are implementing assets based approaches in different contexts. We argue that these approaches are negotiated in that one cannot decide how they might operate in a given context without engaging in deliberative discussion. The challenge for us as open education practitioners is how to turn those deliberations into OER and to highlight the important pedagogical aspect of the design process.

  9. Sustainable Design Re-Examined: Integrated Approach to Knowledge Creation for Sustainable Interior Design

    Science.gov (United States)

    Lee, Young S.

    2014-01-01

    The article focuses on a systematic approach to the instructional framework to incorporate three aspects of sustainable design. It also aims to provide an instruction model for sustainable design stressing a collective effort to advance knowledge creation as a community. It develops a framework conjoining the concept of integrated process in…

  10. A MULTI CRITERIA APPROACH TO DESIGNING THE CELLULAR MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    Rika Ampuh Hadiguna

    2005-01-01

    Full Text Available Cellular manufacturing system design problems such as design framework, manufacturing cells layout and layout evaluation. The research objective is developing the framework to designing manufacturing cells with considering the organization and management aspects in shopfloor. In this research have compared the existing layout with proposed layout which applied the multi criteria approach. The proposed method is combining Analytical Hierarchy Process (AHP, Clustering and heuristic approach. The result has show that grouping with Single Linkage Clustering (SLC to be selected as manufacturing cells. The comparison of clustering weight is 0,567, 0,245 and 0,188 for SLC, Complete Linkage Clustering (CLC and Average Linkage Clustering (ALC, respectively. This result shows that generating layout by using grouping result from SLC. The evaluation result shows that types of manufacturing cells better than process layout which used the existing system.

  11. [95/95] Approach for design limits analysis in WWER

    International Nuclear Information System (INIS)

    Shishkov, L.; Tsyganov, S.

    2008-01-01

    The paper discusses a well-known condition [95%/95%], which is important for monitoring some limits of core parameters in the course of designing the reactors (such as PWR or WWER). The condition ensures the postulate 'there is at least a 95 % probability at a 95 % confidence level that' some parameter does not exceed the limit. Such conditions are stated, for instance, in US standards and IAEA norms as recommendations for DNBR and fuel temperature. A question may arise: why can such approach for the limits be only applied to these parameters, while not normally applied to any other parameters? What is the way to ensure the limits in design practice? Using the general statements of mathematical statistics the authors interpret the [95/95] approach as applied to WWER design limits. (Authors)

  12. A Simulation Approach for Performance Validation during Embedded Systems Design

    Science.gov (United States)

    Wang, Zhonglei; Haberl, Wolfgang; Herkersdorf, Andreas; Wechs, Martin

    Due to the time-to-market pressure, it is highly desirable to design hardware and software of embedded systems in parallel. However, hardware and software are developed mostly using very different methods, so that performance evaluation and validation of the whole system is not an easy task. In this paper, we propose a simulation approach to bridge the gap between model-driven software development and simulation based hardware design, by merging hardware and software models into a SystemC based simulation environment. An automated procedure has been established to generate software simulation models from formal models, while the hardware design is originally modeled in SystemC. As the simulation models are annotated with timing information, performance issues are tackled in the same pass as system functionality, rather than in a dedicated approach.

  13. Availability objectives integration to design. The CIDEM approach

    International Nuclear Information System (INIS)

    Degrave, C.; Martin-Onraet, M.

    1994-01-01

    Considering the operation experience feedback from its nuclear park and from foreign parks, and considering new approaches and design tools such as concurrent engineering, total quality, etc., EDF (Electricite de France) has decided to start the CIDEM approach (integration of availability, operating experience feedback and maintenance into design), an analytical and systematical study process for new projects (REP2000 (or PWR2000)), in order to optimize as much as possible the design phase while integrating maintenance, availability and safety objectives, with the view of a minimized kWh cost. This process, already used in other industries, employs concepts such as RAM (Reliability Availability Maintainability), RCM (Reliability Centered Maintenance) and ILS (Integrated Logistic Support). The availability and maintenance scheduling studies for the REP2000 project are detailed. 10 fig., 6 tab

  14. Optimization of significant insolation distribution parameters - A new approach towards BIPV system design

    Energy Technology Data Exchange (ETDEWEB)

    Paul, D. [SSBB and Senior Member-ASQ, Kolkata (India); Mandal, S.N. [Kalyani Govt Engg College, Kalyani (India); Mukherjee, D.; Bhadra Chaudhuri, S.R. [Dept of E. and T. C. Engg, B.E.S.U., Shibpur (India)

    2010-10-15

    System efficiency and payback time are yet to attain a commercially viable level for solar photovoltaic energy projects. Despite huge development in prediction of solar radiation data, there is a gap in extraction of pertinent information from such data. Hence the available data cannot be effectively utilized for engineering application. This is acting as a barrier for the emerging technology. For making accurate engineering and financial calculations regarding any solar energy project, it is crucial to identify and optimize the most significant statistic(s) representing insolation availability by the Photovoltaic setup at the installation site. Quality Function Deployment (QFD) technique has been applied for identifying the statistic(s), which are of high significance from a project designer's point of view. A MATLAB trademark program has been used to build the annual frequency distribution of hourly insolation over any module plane at a given location. Descriptive statistical analysis of such distributions is done through MINITAB trademark. For Building Integrated Photo Voltaic (BIPV) installation, similar statistical analysis has been carried out for the composite frequency distribution, which is formed by weighted summation of insolation distributions for different module planes used in the installation. Vital most influential statistic(s) of the composite distribution have been optimized through Artificial Neural Network computation. This approach is expected to open up a new horizon in BIPV system design. (author)

  15. An industrial approach to design compelling VR and AR experience

    Science.gov (United States)

    Richir, Simon; Fuchs, Philippe; Lourdeaux, Domitile; Buche, Cédric; Querrec, Ronan

    2013-03-01

    The convergence of technologies currently observed in the field of VR, AR, robotics and consumer electronic reinforces the trend of new applications appearing every day. But when transferring knowledge acquired from research to businesses, research laboratories are often at a loss because of a lack of knowledge of the design and integration processes in creating an industrial scale product. In fact, the innovation approaches that take a good idea from the laboratory to a successful industrial product are often little known to researchers. The objective of this paper is to present the results of the work of several research teams that have finalized a working method for researchers and manufacturers that allow them to design virtual or augmented reality systems and enable their users to enjoy "a compelling VR experience". That approach, called "the I2I method", present 11 phases from "Establishing technological and competitive intelligence and industrial property" to "Improvements" through the "Definition of the Behavioral Interface, Virtual Environment and Behavioral Software Assistance". As a result of the experience gained by various research teams, this design approach benefits from contributions from current VR and AR research. Our objective is to validate and continuously move such multidisciplinary design team methods forward.

  16. Development of passive design zones in China using bioclimatic approach

    International Nuclear Information System (INIS)

    Lam, Joseph C.; Yang Liu; Liu Jiaping

    2006-01-01

    This paper presents the work on development of passive design zones for different climates in China. A total of 18 cities representing the five major climatic types, namely severe cold, cold, hot summer and cold winter, mild and hot summer and warm winter were selected for climatic analysis. Measured weather data were gathered and analysed. A bioclimatic approach was adopted in which the comfort zone and 12 monthly climatic lines were determined and plotted on the psychrometric chart for each city. From these bioclimatic charts, the potential use of passive design strategies such as solar heating, natural ventilation, thermal mass with/without night ventilation and evaporative cooling was assessed. A total of nine passive design strategy zones were identified, and appropriate design strategies suggested for both summer and winter consideration

  17. Consistent approach to air-cleaning system duct design

    International Nuclear Information System (INIS)

    Miller, W.H.; Ornberg, S.C.; Rooney, K.L.

    1981-01-01

    Nuclear power plant air-cleaning system effectiveness is dependent on the capability of a duct system to safely convey contaminated gas to a filtration unit and subsequently to a point of discharge. This paper presents a logical and consistent design approach for selecting sheet metal ductwork construction to meet applicable criteria. The differences in design engineers' duct construction specifications are acknowledged. Typical duct construction details and suggestions for their effective use are presented. Improvements in duct design sections of ANSI/ASME N509-80 are highlighted. A detailed leakage analysis of a control room HVAC system is undertaken to illustrate the effects of conceptual design variations on duct construction requirements. Shortcomings of previously published analyses and interpretations of a current standard are included

  18. A new safety approach in the design of fast reactors

    International Nuclear Information System (INIS)

    Neuhold, R.J.; Marchaterre, J.F.; Waltar, A.E.

    1987-01-01

    A new approach to achieving fast reactor safety goals is becoming really apparent in the US Fast Reactor Program. Whereas the ''defense is best'' philosophy still prevails, there has been a tangible shift toward emphasizing passive mechanisms to protect the reactor and provide public safety---rather than relying on add-on active, engineered safety systems. This paper reviews the technical basis for this new safety approach and provides discussion on its implementation in current US liquid metal-cooled reactor designs. 4 refs., 4 figs

  19. Turbopump Design and Analysis Approach for Nuclear Thermal Rockets

    International Nuclear Information System (INIS)

    Chen, Shucheng S.; Veres, Joseph P.; Fittje, James E.

    2006-01-01

    A rocket propulsion system, whether it is a chemical rocket or a nuclear thermal rocket, is fairly complex in detail but rather simple in principle. Among all the interacting parts, three components stand out: they are pumps and turbines (turbopumps), and the thrust chamber. To obtain an understanding of the overall rocket propulsion system characteristics, one starts from analyzing the interactions among these three components. It is therefore of utmost importance to be able to satisfactorily characterize the turbopump, level by level, at all phases of a vehicle design cycle. Here at the NASA Glenn Research Center, as the starting phase of a rocket engine design, specifically a Nuclear Thermal Rocket Engine design, we adopted the approach of using a high level system cycle analysis code (NESS) to obtain an initial analysis of the operational characteristics of a turbopump required in the propulsion system. A set of turbopump design codes (PumpDes and TurbDes) were then executed to obtain sizing and performance parameters of the turbopump that were consistent with the mission requirements. A set of turbopump analyses codes (PUMPA and TURBA) were applied to obtain the full performance map for each of the turbopump components; a two dimensional layout of the turbopump based on these mean line analyses was also generated. Adequacy of the turbopump conceptual design will later be determined by further analyses and evaluation. In this paper, descriptions and discussions of the aforementioned approach are provided and future outlooks are discussed

  20. Cache and memory hierarchy design a performance directed approach

    CERN Document Server

    Przybylski, Steven A

    1991-01-01

    An authoritative book for hardware and software designers. Caches are by far the simplest and most effective mechanism for improving computer performance. This innovative book exposes the characteristics of performance-optimal single and multi-level cache hierarchies by approaching the cache design process through the novel perspective of minimizing execution times. It presents useful data on the relative performance of a wide spectrum of machines and offers empirical and analytical evaluations of the underlying phenomena. This book will help computer professionals appreciate the impact of ca

  1. An Approach to Incremental Design of Distributed Embedded Systems

    DEFF Research Database (Denmark)

    Pop, Paul; Eles, Petru; Pop, Traian

    2001-01-01

    In this paper we present an approach to incremental design of distributed embedded systems for hard real-time applications. We start from an already existing system running a set of applications and the design problem is to implement new functionality on this system. Thus, we propose mapping...... strategies of functionality so that the already running functionality is not disturbed and there is a good chance that, later, new functionality can easily be mapped on the resulted system. The mapping and scheduling for hard real-time embedded systems are considered the context of a realistic communication...

  2. A design approach for systems based on magnetic pulse compression

    International Nuclear Information System (INIS)

    Praveen Kumar, D. Durga; Mitra, S.; Senthil, K.; Sharma, D. K.; Rajan, Rehim N.; Sharma, Archana; Nagesh, K. V.; Chakravarthy, D. P.

    2008-01-01

    A design approach giving the optimum number of stages in a magnetic pulse compression circuit and gain per stage is given. The limitation on the maximum gain per stage is discussed. The total system volume minimization is done by considering the energy storage capacitor volume and magnetic core volume at each stage. At the end of this paper, the design of a magnetic pulse compression based linear induction accelerator of 200 kV, 5 kA, and 100 ns with a repetition rate of 100 Hz is discussed with its experimental results

  3. Participatory knowledge-management design: A semiotic approach

    DEFF Research Database (Denmark)

    Valtolina, Stefano; Barricelli, Barbara Rita; Dittrich, Yvonne

    2012-01-01

    vocabularies, notations, and suitable visual structures for navigating among interface elements. To this end, the paper describes how our semiotic approach supports processes for representing, storing, accessing, and transferring knowledge through which the information architecture of an interactive system can......The aim of this paper is to present a design strategy for collaborative knowledge-management systems based on a semiotic approach. The contents and structure of experts' knowledge is highly dependent on professional or individual practice. Knowledge-management systems that support cooperation...... a semiotic perspective to computer application and human–computer interaction. From a semiotic perspective, the computer application is both a message from the designer to the user about the structure of the problem domain, as well as about interaction with it, and a structured channel for the user...

  4. Designing Course An Initial Approach To Translation Teaching

    Directory of Open Access Journals (Sweden)

    Roswani Siregar

    2017-09-01

    Full Text Available Along with the human history translation is the sustainable communication tool among the cultures to preserve this knowledge from generation to generations. Undoubtedly both translation plays a very important role in an increasingly globalized world and translators have the prominent roles in the development of countries. Many translators really enjoy their work but hesitated to teach a course due to their lack of pedagogical knowledge and believe that the translation skill is gained by personal experiences and talents. Thus this paper attempt to promote the translation teaching in classroom by set the preliminary approach to teach translation. The sequences of teaching design are described by propose the brief definition to the nature of translation the importance translation teaching the translator competence and design of translation course. This paper is the preliminary approach to translation teaching for beginners in university setting.

  5. A design approach for integrating thermoelectric devices using topology optimization

    DEFF Research Database (Denmark)

    Soprani, Stefano; Haertel, Jan Hendrik Klaas; Lazarov, Boyan Stefanov

    2016-01-01

    Efficient operation of thermoelectric devices strongly relies on the thermal integration into the energy conversion system in which they operate. Effective thermal integration reduces the temperature differences between the thermoelectric module and its thermal reservoirs, allowing the system...... to operate more efficiently. This work proposes and experimentally demonstrates a topology optimization approach as a design tool for efficient integration of thermoelectric modules into systems with specific design constraints. The approach allows thermal layout optimization of thermoelectric systems...... for different operating conditions and objective functions, such as temperature span, efficiency, and power recoveryrate. As a specific application, the integration of a thermoelectric cooler into the electronics section ofa downhole oil well intervention tool is investigated, with the objective of minimizing...

  6. A methodological approach to designing sewer system control

    DEFF Research Database (Denmark)

    Mollerup, Ane Loft

    for this thesis was therefore the wish for a methodological approach to sewer system control design. Using a case study the following research hypothesis was tested in this thesis: Using classical and modern control theory, a methodological approach can be derived for designing sewer system control. This can aid....... This was not unexpected, since the true potential of having optimisation arises, when a system has many control loops with limit-ing constraints and/or changing prioritisation between them. The results showed that for small sewer systems, where the complexity is limited, it is not necessarily the best option to implement...... generate control systems of the future that are more robust, more structured, have a better performance and are easi-er to maintain....

  7. A design approach for integrating thermoelectric devices using topology optimization

    International Nuclear Information System (INIS)

    Soprani, S.; Haertel, J.H.K.; Lazarov, B.S.; Sigmund, O.; Engelbrecht, K.

    2016-01-01

    Highlights: • The integration of a thermoelectric (TE) cooler into a robotic tool is optimized. • Topology optimization is suggested as design tool for TE integrated systems. • A 3D optimization technique using temperature dependent TE properties is presented. • The sensitivity of the optimization process to the boundary conditions is studied. • A working prototype is constructed and compared to the model results. - Abstract: Efficient operation of thermoelectric devices strongly relies on the thermal integration into the energy conversion system in which they operate. Effective thermal integration reduces the temperature differences between the thermoelectric module and its thermal reservoirs, allowing the system to operate more efficiently. This work proposes and experimentally demonstrates a topology optimization approach as a design tool for efficient integration of thermoelectric modules into systems with specific design constraints. The approach allows thermal layout optimization of thermoelectric systems for different operating conditions and objective functions, such as temperature span, efficiency, and power recovery rate. As a specific application, the integration of a thermoelectric cooler into the electronics section of a downhole oil well intervention tool is investigated, with the objective of minimizing the temperature of the cooled electronics. Several challenges are addressed: ensuring effective heat transfer from the load, minimizing the thermal resistances within the integrated system, maximizing the thermal protection of the cooled zone, and enhancing the conduction of the rejected heat to the oil well. The design method incorporates temperature dependent properties of the thermoelectric device and other materials. The 3D topology optimization model developed in this work was used to design a thermoelectric system, complete with insulation and heat sink, that was produced and tested. Good agreement between experimental results and

  8. Approach to interior design for passive direct gain solar homes

    Energy Technology Data Exchange (ETDEWEB)

    Kachadorian, C.C.

    1980-01-01

    In response to requests from buyers and builders of direct gain passive solar homes interior design criteria either specific to, or emphasized by, passive solar buildings are investigated. Problems of high sunlight penetration, secondary illumination, material selection, sound control and psychology are approached. Material deterioration, fading, glare, noise, and a sense of spacial confinement can be minimized, contributing to the appeal and saleability of passive solar homes.

  9. Compressor Surge Control Design Using Linear Matrix Inequality Approach

    OpenAIRE

    Uddin, Nur; Gravdahl, Jan Tommy

    2017-01-01

    A novel design for active compressor surge control system (ASCS) using linear matrix inequality (LMI) approach is presented and including a case study on piston-actuated active compressor surge control system (PAASCS). The non-linear system dynamics of the PAASCS is transformed into linear parameter varying (LPV) system dynamics. The system parameters are varying as a function of the compressor performance curve slope. A compressor surge stabilization problem is then formulated as a LMI probl...

  10. Flow-based approach for holistic factory engineering and design

    OpenAIRE

    Constantinescu, C.; Westkämper, E.

    2010-01-01

    The engineering of future factories requires digital tools along life cycle phases from investment planning to ramp-up. Manufacturers need scientific-based integrated highly dynamic data management systems for the participative and integrated factory planning. The paper presents a new approach for the continuously integrated product design, factory and process planning, through a service-oriented architecture for the implementation of digital factory tools. A first prototype of the digital fa...

  11. Adding Value in Construction Design Management by Using Simulation Approach

    OpenAIRE

    Doloi, Hemanta

    2008-01-01

    Simulation modelling has been introduced as a decision support tool for front end planning and design analysis of projects. An integrated approach has been discussed linking project scope, end product or project facility performance and the strategic project objectives at the early stage of projects. The case study example on tram network demonstrates that application of simulation helps assessing performance of project operation and making appropriate investment decisions over life cycle of ...

  12. Designing Privacy for You : A User Centric Approach For Privacy

    OpenAIRE

    Senarath, Awanthika; Arachchilage, Nalin A. G.; Slay, Jill

    2017-01-01

    Privacy directly concerns the user as the data owner (data- subject) and hence privacy in systems should be implemented in a manner which concerns the user (user-centered). There are many concepts and guidelines that support development of privacy and embedding privacy into systems. However, none of them approaches privacy in a user- centered manner. Through this research we propose a framework that would enable developers and designers to grasp privacy in a user-centered manner and implement...

  13. Human Needs as an Approach to Designed Landscapes

    Directory of Open Access Journals (Sweden)

    Dalia Aly

    2018-03-01

    Full Text Available The traditional approach of landscape architecture has always focused on the aesthetic and visual aspects of landscapes while giving less attention to other aspects. This view has limited the benefits that can be derived from designed landscapes, despite the wide-ranging potential they carry for humans; socially, environmentally and economically. As a result, many researchers and practitioners are currently challenging this view to develop a more holistic and multidimensional approach. The present research therefore aims at proposing a new perspective for public designed landscapes based on fundamental human needs. The study methodology was comprised of critical content analysis for three main domains: sustainable development, human needs in specific relation to public landscapes, and significant approaches to fundamental human needs. Reconciliation among these domains was achieved based on a modified version of Max-Neef’s matrix of fundamental human needs. Human needs in public landscapes were merged into the matrix to reach a comprehensive yet specific perspective. The study concluded with a conceptual framework that can provide a wider perspective to human needs in designed landscapes. It proposes a new tool for the analysis of the benefits of public landscapes and their value for humans, which can be further used in various applications.

  14. Reliability-based optimal structural design by the decoupling approach

    International Nuclear Information System (INIS)

    Royset, J.O.; Der Kiureghian, A.; Polak, E.

    2001-01-01

    A decoupling approach for solving optimal structural design problems involving reliability terms in the objective function, the constraint set or both is discussed and extended. The approach employs a reformulation of each problem, in which reliability terms are replaced by deterministic functions. The reformulated problems can be solved by existing semi-infinite optimization algorithms and computational reliability methods. It is shown that the reformulated problems produce solutions that are identical to those of the original problems when the limit-state functions defining the reliability problem are affine. For nonaffine limit-state functions, approximate solutions are obtained by solving series of reformulated problems. An important advantage of the approach is that the required reliability and optimization calculations are completely decoupled, thus allowing flexibility in the choice of the optimization algorithm and the reliability computation method

  15. Design Approaches to Myocardial and Vascular Tissue Engineering.

    Science.gov (United States)

    Akintewe, Olukemi O; Roberts, Erin G; Rim, Nae-Gyune; Ferguson, Michael A H; Wong, Joyce Y

    2017-06-21

    Engineered tissues represent an increasingly promising therapeutic approach for correcting structural defects and promoting tissue regeneration in cardiovascular diseases. One of the challenges associated with this approach has been the necessity for the replacement tissue to promote sufficient vascularization to maintain functionality after implantation. This review highlights a number of promising prevascularization design approaches for introducing vasculature into engineered tissues. Although we focus on encouraging blood vessel formation within myocardial implants, we also discuss techniques developed for other tissues that could eventually become relevant to engineered cardiac tissues. Because the ultimate solution to engineered tissue vascularization will require collaboration between wide-ranging disciplines such as developmental biology, tissue engineering, and computational modeling, we explore contributions from each field.

  16. Task team approach to safeguards and security designs

    International Nuclear Information System (INIS)

    Zack, N.R.; Wilkey, D.D.

    1991-01-01

    In 1987, a U.S. department of Energy (DOE) supported task team was organized at the request of the DOE Idaho Field Office (DOE-ID) to provide support for safeguards and security (S and S) designs of the Special Isotope Separation (SIS) facility. Prior to deferral of the project, the SIS facility was to be constructed at the Idaho National Engineering Laboratory (INEL) to produce weapons grade plutonium from DOE owned fuel grade plutonium. The task team was assembled to provide the resources necessary to assure that S and S considerations were included as an integral part of the design of the facility, and that SIS designs would take advantage of available technology in the areas of physical security, measurements, accountability, and material and personnel tracking. The task team included personnel from DOE/Office of Safeguards and Security (DOE-OSS), DOE-ID, DOE contractors, and the national laboratories providing a wide range of expertise and experience. This paper reports that the team reviewed proposed designs and provided recommendations for safeguards and security features in each stage of the design process. The value of this approach to safeguards and security designs will be discussed with respect to benefits, lessons learned, and recommendations for future applications

  17. EPR design: A combined approach on safety and economic competitiveness

    International Nuclear Information System (INIS)

    Griedl, R.; Sturm, J.; Degrave, C.; Kappler, F.; Martin-Onraet, M.

    2001-01-01

    Starting in 1991, the French and German cooperation led to common work based on the experience of the two designers FRAMATOME and SIEMENS KWU with all their know how, the most important utilities in France and Germany operating NPP and the technical supports of the Licensing Authorities GRS and IPSN. The conclusion of that work was the issue in November 1997 and February 1999 respectively of two Basic Design reports for a European Pressurized Reactor (EPR) with a power of 4250 MWth and 4900 MWth. The Basic Design approach was led under two key items: Enhancement of the overall safety level by implementation of design measures to: make the plant less dependant to common cause failures; practically eliminate all high pressure core melt sequences which could lead to important radioactive releases to the environment; implement specific systems to face severe accident situation with low-pressure core melt. Use of the many years of experiences in two different nuclear designs is to reach an overall availability figure over 91%, partly due to design improvements on the safety level. With such an objective, demonstrated by feedback of experience on already operating plants, the EPR project can be proposed as a competitive alternative to the most recent fossil plants. (author)

  18. Review of the Safety Design Approaches in Sodium Fast Reactors

    International Nuclear Information System (INIS)

    Suk, Soo Dong; Lee, Yong Bum

    2009-12-01

    The principle of the Defense in depth is essential in securing the safety of nuclear power plants, that is, to prevent cores-damaging severs accidents and to minimize the radiological consequences of the accidents 'as low as possible' (ALARA). One of the major design features of sodium fast reactors (SFRs) is that it has a large amount of sodium in the reactor vessel, providing a large heat capacity, such that it is feasible to contain the consequences of sever core damaging accidents in the vessel and primary system boundary. Containment of a severe accident in the primary system boundary, that is called in-vessel retention(IVR), is not a licensing requirement but set up as a design goal in most of the SFR design in the context of risk minimization. The objective of this report is to broadly review and compare the approaches and efforts made in the some of the major SFR designs of the US, Europe and Japan to prevent severe accidents and mitigate their consequences should they occur. Specifically, the subjects described in this report include design criteria or requirements, accident categorization and acceptance criteria, design features to prevent and contain severs accidents

  19. PETROBRAS P-55: a new approach for the topsides design

    Energy Technology Data Exchange (ETDEWEB)

    Bronneberg, Jos; Maas, Hans [SBM Offshore, Schiedam (Netherlands); GustoMSC, Schiedam (Netherlands); Cyranka, Carlos [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2008-07-01

    In July 2007 PETROBRAS awarded Gusto BV the Front End Engineering and Design for the re-design of the Topsides for PETROBRAS-55 Production Platform ('P-55') seeking simplification, reduction of costs and schedule. The PETROBRAS-55 will add an impressive 180 000 barrels oil processing capacity to the Roncador Field in the Campos Basin. Despite its large capacity the functions to be fulfilled on board can be performed by methods well known in the oil industry. Oil dehydration by gravity and electrostatic separators, oil stabilization through heating and depressurization, carbon dioxide removal out of gas through adsorption by amine, gas dehydration through absorption by glycol, produced water treatment through hydrocyclones and gas flotation, etc. Offshore operations in general, due to their independent (self reliance), remote location, limited manning and expertise, etc., need to be as rugged, robust, lean and simple in its set-up and operation as possible. The (front end) engineering plays an essential role in the Endeavour to obtain these characteristics on an offshore unit. The initial configuration is perceived as one of the key elements that will determine to a great extent the feasibility of the much sought simplicity. Since the basic design does not cover the complete project the approach used to meet the objectives was to deliver a safe, operable and lean design, it focused on simplifications. The mainly technical approach is described below. (author)

  20. Control-matrix approach to stellarator design and control

    International Nuclear Information System (INIS)

    Mynick, H. E.; Pomphrey, N.

    2000-01-01

    The full space Z(equivalent to){Z j=1,...,Nz } of independent variables defining a stellarator configuration is large. To find attractive design points in this space, or to understand operational flexibility about a given design point, one needs insight into the topography in Z-space of the physics figures of merit P i which characterize the machine performance, and means of determining those directions in Z-space which give one independent control over the P i , as well as those which affect none of them, and so are available for design flexibility. The control matrix (CM) approach described here provides a mathematical means of obtaining these. In this work, the CM approach is described and used in studying some candidate Quasi-Axisymmetric (QA) stellarator configurations the National Compact Stellarator Experiment design group has been considering. In the process of the analysis, a first exploration of the topography of the configuration space in the vicinity of these candidate systems has been performed, whose character is discussed

  1. Control-matrix approach to stellarator design and control

    International Nuclear Information System (INIS)

    Mynick, H.E.; Pomphrey, N.

    2000-01-01

    The full space Z always equal to {Zj=1,..Nz} of independent variables defining a stellarator configuration is large. To find attractive design points in this space, or to understand operational flexibility about a given design point, one needs insight into the topography in Z-space of the physics figures of merit Pi which characterize the machine performance, and means of determining those directions in Z-space which give one independent control over the Pi, as well as those which affect none of them, and so are available for design flexibility. The control matrix (CM) approach described here provides a mathematical means of obtaining these. In this work, the authors describe the CM approach and use it in studying some candidate Quasi-Axisymmetric (QA) stellarator configurations the NCSX design group has been considering. In the process of the analysis, a first exploration of the topography of the configuration space in the vicinity of these candidate systems has been performed, whose character is discussed

  2. A projective approach to a language of landscape design

    Directory of Open Access Journals (Sweden)

    Catherine Ward Thompson

    1997-10-01

    Full Text Available Building on the work of Kelly (1955 in personal construct psychology, and Peled (1976, I990 in ecoanalysis, this paper develops projective techniques-which use concepts of personal and phenomenological space-as a means for articulating approaches to landscape design. The projective approach involves two stages. In stage one, projective techniques are used to elicit personal constructs (which may be held at a pre-conscious or sub-conscious level, allowing the holistic experience of landscape to be explored. In stage two, using a 'projection location task' derived from the way we experience and construe the regions of our own bodies, elements of these constructs can then be articulated so as to inform the way we interact and engage with the space around us. This gives insight into the meaning of spatial layouts, which can then be translated into a design language for the structural ordering of space. The author draws on original research conducted with children as well as adults, using projective techniques to draw out their desires and needs in relation to designing their landscape environment. The paper discusses the value of such methods for landscape designers and their clients, and outlines some ongoing research to test the validity of the projection location task.

  3. Some approaches to system reliability improvement in engineering design

    International Nuclear Information System (INIS)

    Shen, Kecheng.

    1990-01-01

    In this thesis some approaches to system reliability improvement in engineering design are studied. In particular, the thesis aims at developing alternative methodologies for ranking of component importance which are more related to the design practice and which are more useful in system synthesis than the existing ones. It also aims at developing component reliability models by means of stress-strength interference which will enable both component reliability prediction and design for reliability. A new methodology for ranking of component importance is first developed based on the notion of the increase of the expected system yield. This methodology allows for incorporation of different improvement actions at the component level such as parallel redundancy, standby redundancy, burn-in, minimal repair and perfect replacement. For each of these improvement actions, the increase of system reliability is studied and used as the component importance measure. A possible connection between the commonly known models of component lifetimes and the stress-strength interference models is suggested. Under some general conditions the relationship between component failure rate and the stress and strength distribution characteristics is studied. A heuristic approach for obtaining bounds on failure probability through stress-strength interference is also presented. A case study and a worked example are presented, which illustrate and verify the developed importance measures and their applications in the analytical as well as synthetical work of engineering design. (author)

  4. Data-Driven Controller Design The H2 Approach

    CERN Document Server

    Sanfelice Bazanella, Alexandre; Eckhard, Diego

    2012-01-01

    Data-driven methodologies have recently emerged as an important paradigm alternative to model-based controller design and several such methodologies are formulated as an H2 performance optimization. This book presents a comprehensive theoretical treatment of the H2 approach to data-driven control design. The fundamental properties implied by the H2 problem formulation are analyzed in detail, so that common features to all solutions are identified. Direct methods (VRFT) and iterative methods (IFT, DFT, CbT) are put under a common theoretical framework. The choice of the reference model, the experimental conditions, the optimization method to be used, and several other designer’s choices are crucial to the quality of the final outcome, and firm guidelines for all these choices are derived from the theoretical analysis presented. The practical application of the concepts in the book is illustrated with a large number of practical designs performed for different classes of processes: thermal, fluid processing a...

  5. A New Design Approach to Game-Based learning

    DEFF Research Database (Denmark)

    Larsen, Lasse Juel

    2012-01-01

    to ground the student’s reason to learn. This paper proposes a different approach: using visualisation in immersive 3D worlds as both documentation of learning progress and as a reward system which motivates further learning. The overall design idea is to build a game based learning system from three......This paper puts forward a new design perspective for gamebased learning. The general idea is to abandon the long sought-after dream of designing a closed learning system, where students in both primary and secondary school could learn – without the interference of teachers – whatever subject......-based learning system, but will also confront aspects of modern learning theory, especially the notion of reference between the content of an assignment and the reality with which it should or could be connected (situated learning). The second idea promotes a way of tackling the common experience of the average...

  6. A New Design Approach to game or play based learning

    DEFF Research Database (Denmark)

    Larsen, Lasse Juel

    to ground the students sense of meaning. This paper proposes another approach: using visualization in immersive 3D-worlds as documentation of learning progress while at the same time constituting a reward system which motivate further learning. The overall design idea is to build a game based learning......Abstract: The present paper proposes a new design perspective for game based learning. The general idea is to abandon the long and sought after dream of designing a closed learning system, where students from elementary school to high school without teachers’ interference could learn whatever...... game based learning system, but also confront aspects of modern learning theory especially the notion of reference between content of an assignment and the reality with which it should or could be connected (situated learning). The second idea promotes a way to tackle the common experience...

  7. Numerical Optimization Design of Dynamic Quantizer via Matrix Uncertainty Approach

    Directory of Open Access Journals (Sweden)

    Kenji Sawada

    2013-01-01

    Full Text Available In networked control systems, continuous-valued signals are compressed to discrete-valued signals via quantizers and then transmitted/received through communication channels. Such quantization often degrades the control performance; a quantizer must be designed that minimizes the output difference between before and after the quantizer is inserted. In terms of the broadbandization and the robustness of the networked control systems, we consider the continuous-time quantizer design problem. In particular, this paper describes a numerical optimization method for a continuous-time dynamic quantizer considering the switching speed. Using a matrix uncertainty approach of sampled-data control, we clarify that both the temporal and spatial resolution constraints can be considered in analysis and synthesis, simultaneously. Finally, for the slow switching, we compare the proposed and the existing methods through numerical examples. From the examples, a new insight is presented for the two-step design of the existing continuous-time optimal quantizer.

  8. Innovative features and fuel design approach in the iris reactor

    International Nuclear Information System (INIS)

    Petrovic, B.; Carelli, M.; Greenspan, E.; Matsumoto, H.; Padovani, E.; Ganda, F.

    2002-01-01

    The International Reactor Innovative and Secure (IRIS) is being developed by an international consortium of industry, laboratory, university and utility establishments, led by Westinghouse. The IRIS design addresses key requirements associated with advanced reactors, including improved safety, enhanced proliferation resistance, competitive electricity production cost, and improved waste management. IRIS is a modular, small/medium size (335 MWe) PWR with an integral vessel configuration. The objective has been to base its design on proven LWR technology, so that no new technology development is needed and near-term deployment is possible, yet at the same time to introduce innovative features making it attractive when compared to present PWRs. These opposing requirements resulted in an evolutionary approach to fuel and core design, balancing new features against the need to avoid extensive testing and demonstration programmes. (author)

  9. Bringing service design to manufacturing companies: integrating PSS and service design approaches

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2018-01-01

    in a manufacturing industry. This paper details how the application supports the design of product–service system solutions from the exploration to the implementation stages, highlighting the physical evidence of service, and contributes to advance design research at the intersection of PSS and Service Design.......Manufacturing companies increasingly try to innovate in their offers to consumers by creating more complete solutions that combine product and service components. However, shifting from a product-centric perspective to a solution-oriented perspective is challenging. The present study adopted...... a design research methodology and built on Service-Dominant logic, integrating the human-oriented perspective of Service Design with an organizational network-oriented perspective of Product–Service System. It creates a new Integrative PSS approach, evolves design models, and provides an application...

  10. Learning design Rashomon I – supporting the design of one lesson through different approaches

    Directory of Open Access Journals (Sweden)

    Donatella Persico

    2013-08-01

    Full Text Available This paper presents and compares a variety of approaches that have been developed to guide the decision-making process in learning design. Together with the companion Learning Design Rashomon II (Prieto et al., 2013, devoted to existing tools to support the same process, it aims to provide a view on relevant research results in this field. The common thread followed in these two contributions is inspired by Kurosawa's Rashomon film, which takes multiple perspectives on the same action. Similarly, in this paper, Rashomon I, a lesson on “Healthy Eating” is analysed according to five different approaches, while the Rashomon II paper is used to exemplify the affordances of different tools. For this reason, this paper does not follow the conventional structure of research papers (research question, method, results and discussion, but rather it moves from an introduction providing the rationale for the paper, to a description of the five different approaches to learning design (the 4SPPIces Model, the 4Ts, the e-Design Template, the Design Principles Database and the Design Narrative and then to a discussion of their similarities and differences to inform the choice of potential users.

  11. Application of a quality by design approach to the cell culture process of monoclonal antibody production, resulting in the establishment of a design space.

    Science.gov (United States)

    Nagashima, Hiroaki; Watari, Akiko; Shinoda, Yasuharu; Okamoto, Hiroshi; Takuma, Shinya

    2013-12-01

    This case study describes the application of Quality by Design elements to the process of culturing Chinese hamster ovary cells in the production of a monoclonal antibody. All steps in the cell culture process and all process parameters in each step were identified by using a cause-and-effect diagram. Prospective risk assessment using failure mode and effects analysis identified the following four potential critical process parameters in the production culture step: initial viable cell density, culture duration, pH, and temperature. These parameters and lot-to-lot variability in raw material were then evaluated by process characterization utilizing a design of experiments approach consisting of a face-centered central composite design integrated with a full factorial design. Process characterization was conducted using a scaled down model that had been qualified by comparison with large-scale production data. Multivariate regression analysis was used to establish statistical prediction models for performance indicators and quality attributes; with these, we constructed contour plots and conducted Monte Carlo simulation to clarify the design space. The statistical analyses, especially for raw materials, identified set point values, which were most robust with respect to the lot-to-lot variability of raw materials while keeping the product quality within the acceptance criteria. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

  12. Sycamore produces viable seed after six years

    Science.gov (United States)

    A. F. Ike

    1966-01-01

    In the early stages of any tree improvement program it is desirable to know how soon progenies of selected parents can themselves be included in a breeding program. How soon will they produce viable pollen and seed? In the case of sycamore (Platanus occidentalis L.), the information is meager: the Woody- Plant Seed Manual lists the minimum commercial seedbearing age...

  13. Incomplete by Design: A Study of a Design-in-Use Approach to Systems Implementation

    DEFF Research Database (Denmark)

    Torkilsheyggi, Arnvør Martinsdóttir á; Hertzum, Morten

    2017-01-01

    In complex work settings the design of a system, including the associated work practices, must be completed in use to derive full benefit from the system. We investigate the introduction of an electronic whiteboard throughout a hospital in which management substituted a local design-in-use process......, driven by super users, for a centrally organized implementation process. The aim of this study is to investigate the design-in-use approach to systems implementation with respect to the tension that ensued between hospital management’s expectations to the process and the goals pursued in the individual...

  14. Innovative approaches to clinical development and trial design

    Directory of Open Access Journals (Sweden)

    John J Orloff

    2011-01-01

    Full Text Available Pharmaceutical innovation is increasingly risky, costly and at times inefficient, which has led to a decline in industry productivity. Despite the increased investment in R&D by the industry, the number of new molecular entities achieving marketing authorization is not increasing. Novel approaches to clinical development and trial design could have a key role in overcoming some of these challenges by improving efficiency and reducing attrition rates. The effectiveness of clinical development can be improved by adopting a more integrated model that increases flexibility and maximizes the use of accumulated knowledge. Central to this model of drug development are novel tools, including modelling and simulation, Bayesian methodologies, and adaptive designs, such as seamless adaptive designs and sample-size re-estimation methods. Applications of these methodologies to early- and late-stage drug development are described with some specific examples, along with advantages, challenges, and barriers to implementation. Because they are so flexible, these new trial designs require significant statistical analyses, simulations and logistical considerations to verify their operating characteristics, and therefore tend to require more time for the planning and protocol development phase. Greater awareness of the distinct advantages of innovative designs by regulators and sponsors are crucial to increasing the adoption of these modern tools.

  15. Acting like a physicist: Student approach study to experimental design

    Science.gov (United States)

    Karelina, Anna; Etkina, Eugenia

    2007-12-01

    National studies of science education have unanimously concluded that preparing our students for the demands of the 21st century workplace is one of the major goals. This paper describes a study of student activities in introductory college physics labs, which were designed to help students acquire abilities that are valuable in the workplace. In these labs [called Investigative Science Learning Environment (ISLE) labs], students design their own experiments. Our previous studies have shown that students in these labs acquire scientific abilities such as the ability to design an experiment to solve a problem, the ability to collect and analyze data, the ability to evaluate assumptions and uncertainties, and the ability to communicate. These studies mostly concentrated on analyzing students’ writing, evaluated by specially designed scientific ability rubrics. Recently, we started to study whether the ISLE labs make students not only write like scientists but also engage in discussions and act like scientists while doing the labs. For example, do students plan an experiment, validate assumptions, evaluate results, and revise the experiment if necessary? A brief report of some of our findings that came from monitoring students’ activity during ISLE and nondesign labs was presented in the Physics Education Research Conference Proceedings. We found differences in student behavior and discussions that indicated that ISLE labs do in fact encourage a scientistlike approach to experimental design and promote high-quality discussions. This paper presents a full description of the study.

  16. Acting like a physicist: Student approach study to experimental design

    Directory of Open Access Journals (Sweden)

    Anna Karelina

    2007-10-01

    Full Text Available National studies of science education have unanimously concluded that preparing our students for the demands of the 21st century workplace is one of the major goals. This paper describes a study of student activities in introductory college physics labs, which were designed to help students acquire abilities that are valuable in the workplace. In these labs [called Investigative Science Learning Environment (ISLE labs], students design their own experiments. Our previous studies have shown that students in these labs acquire scientific abilities such as the ability to design an experiment to solve a problem, the ability to collect and analyze data, the ability to evaluate assumptions and uncertainties, and the ability to communicate. These studies mostly concentrated on analyzing students’ writing, evaluated by specially designed scientific ability rubrics. Recently, we started to study whether the ISLE labs make students not only write like scientists but also engage in discussions and act like scientists while doing the labs. For example, do students plan an experiment, validate assumptions, evaluate results, and revise the experiment if necessary? A brief report of some of our findings that came from monitoring students’ activity during ISLE and nondesign labs was presented in the Physics Education Research Conference Proceedings. We found differences in student behavior and discussions that indicated that ISLE labs do in fact encourage a scientistlike approach to experimental design and promote high-quality discussions. This paper presents a full description of the study.

  17. Integrating availability and maintenance objectives in plant design. EDF approach

    International Nuclear Information System (INIS)

    Degrave, Claude; Martin-Onraet, Michel

    1995-01-01

    Energy self sufficiency is a major strategic necessity for France. Regarding the fossil fuels power, competitiveness of nuclear energy is a key goal for Electricite de France. Accordingly, for future nuclear power plants to remain competitive, it is necessary to maintain the kWh production costs of the future units at a level close to those of the latest units under construction (N4 series), while raising the safety level. EDF therefore decided to implement an analytical and systematic process for study of the new projects to optimize the design by integration of the maintenance (durations, costs), availability and radiation exposure goals from the related operating experience. This approach, CIDEM (French acronym for Design Integrating Availability, operating Experience and Maintenance) aims at a single goal: to minimize the kWh production cost incorporating investment, operation and fuel costs, allowing for the operating experience from French and foreign units. The implementation of the CIDEM process constitutes for EDF a new approach to the study of the new Nuclear Power Plant projects. The competitivity of nuclear energy greatly depends on the success of such an approach. The studies conducted in the availability field have already highlighted a number of critical points and have made it possible to define the corresponding goal allocations and to establish a first series of structuring specifications for the project. (J.P.N.)

  18. Design and Development of a Portable Metal Chip Baler using A System Design Approach

    Directory of Open Access Journals (Sweden)

    Hassan Mohd Fahrul

    2017-01-01

    Full Text Available A large amount of metal chips at workplace will result in untidy and unsafe condition thus measurements of safety are needed in some industries, where the metal chips will be collected and put into a container until the volume is sufficient to be recycled. Due to that reason, the metal chips require a lot of spaces for storage before going to recycle. In this study, a portable metal chip baler as a device for compacting those metal chips is presented based on a system approach of engineering design. Basically, the system design evolves through four phases of development that are started from conceptual design, preliminary system design, detail design and development to system test and evaluation. The portable metal chip baler uses current technology such as pneumatic cylinder to compress the metal chips so that the system capable to operate efficiently. The output from this system is the metal chips are compacted into a block shape and a working prototype was developed to prove the concept of the system. As a summary, the conceptual design of portable metal chip baler was proven and was presented using the philosophy of the systems design approach. This tool may assists workers especially in the Small-Medium Enterprise (SME manufacturing industries, school or universities’ workshops for managing metal chips easily and systematically.

  19. Inviscid/Boundary-Layer Aeroheating Approach for Integrated Vehicle Design

    Science.gov (United States)

    Lee, Esther; Wurster, Kathryn E.

    2017-01-01

    A typical entry vehicle design depends on the synthesis of many essential subsystems, including thermal protection system (TPS), structures, payload, avionics, and propulsion, among others. The ability to incorporate aerothermodynamic considerations and TPS design into the early design phase is crucial, as both are closely coupled to the vehicle's aerodynamics, shape and mass. In the preliminary design stage, reasonably accurate results with rapid turn-representative entry envelope was explored. Initial results suggest that for Mach numbers ranging from 9-20, a few inviscid solutions could reasonably sup- port surface heating predictions at Mach numbers variation of +/-2, altitudes variation of +/-10 to 20 kft, and angle-of-attack variation of +/- 5. Agreement with Navier-Stokes solutions was generally found to be within 10-15% for Mach number and altitude, and 20% for angle of attack. A smaller angle-of-attack increment than the 5 deg around times for parametric studies and quickly evolving configurations are necessary to steer design decisions. This investigation considers the use of an unstructured 3D inviscid code in conjunction with an integral boundary-layer method; the former providing the flow field solution and the latter the surface heating. Sensitivity studies for Mach number, angle of attack, and altitude, examine the feasibility of using this approach to populate a representative entry flight envelope based on a limited set of inviscid solutions. Each inviscid solution is used to generate surface heating over the nearby trajectory space. A subset of a considered in this study is recommended. Results of the angle-of-attack sensitivity studies show that smaller increments may be needed for better heating predictions. The approach is well suited for application to conceptual multidisciplinary design and analysis studies where transient aeroheating environments are critical for vehicle TPS and thermal design. Concurrent prediction of aeroheating

  20. Robot companions and ethics a pragmatic approach of ethical design.

    Science.gov (United States)

    Cornet, Gérard

    2013-12-01

    From his experience as ethical expert for two Robot Companion prototype projects aiming at empowering older MCI persons to remain at home and to support their family carers, Gerard Cornet, Gerontologist, review the ethical rules, principles and pragmatic approaches in different cultures. The ethical process of these two funded projects, one European, Companionable (FP7 e-inclusion call1), the other French, Quo vadis (ANR tecsan) are described from the inclusion of the targeted end users in the process, to the assessment and ranking of their main needs and whishes to design the specifications, test the performance expected. Obstacles to turn round and limits for risks evaluation (directs or implicit), acceptability, utility, respect of intimacy and dignity, and balance with freedom and security and frontiers to artificial intelligence are discussed As quoted in the discussion with the French and Japanese experts attending the Toulouse Robotics and medicine symposium (March 26th 2011), the need of a new ethical approach, going further the present ethical rules is needed for the design and social status of ethical robots, having capacity cas factor of progress and global quality of innovation design in an ageing society.

  1. A statistical approach to optimizing concrete mixture design.

    Science.gov (United States)

    Ahmad, Shamsad; Alghamdi, Saeid A

    2014-01-01

    A step-by-step statistical approach is proposed to obtain optimum proportioning of concrete mixtures using the data obtained through a statistically planned experimental program. The utility of the proposed approach for optimizing the design of concrete mixture is illustrated considering a typical case in which trial mixtures were considered according to a full factorial experiment design involving three factors and their three levels (3(3)). A total of 27 concrete mixtures with three replicates (81 specimens) were considered by varying the levels of key factors affecting compressive strength of concrete, namely, water/cementitious materials ratio (0.38, 0.43, and 0.48), cementitious materials content (350, 375, and 400 kg/m(3)), and fine/total aggregate ratio (0.35, 0.40, and 0.45). The experimental data were utilized to carry out analysis of variance (ANOVA) and to develop a polynomial regression model for compressive strength in terms of the three design factors considered in this study. The developed statistical model was used to show how optimization of concrete mixtures can be carried out with different possible options.

  2. A Statistical Approach to Optimizing Concrete Mixture Design

    Directory of Open Access Journals (Sweden)

    Shamsad Ahmad

    2014-01-01

    Full Text Available A step-by-step statistical approach is proposed to obtain optimum proportioning of concrete mixtures using the data obtained through a statistically planned experimental program. The utility of the proposed approach for optimizing the design of concrete mixture is illustrated considering a typical case in which trial mixtures were considered according to a full factorial experiment design involving three factors and their three levels (33. A total of 27 concrete mixtures with three replicates (81 specimens were considered by varying the levels of key factors affecting compressive strength of concrete, namely, water/cementitious materials ratio (0.38, 0.43, and 0.48, cementitious materials content (350, 375, and 400 kg/m3, and fine/total aggregate ratio (0.35, 0.40, and 0.45. The experimental data were utilized to carry out analysis of variance (ANOVA and to develop a polynomial regression model for compressive strength in terms of the three design factors considered in this study. The developed statistical model was used to show how optimization of concrete mixtures can be carried out with different possible options.

  3. A design approach for ultrareliable real-time systems

    Science.gov (United States)

    Lala, Jaynarayan H.; Harper, Richard E.; Alger, Linda S.

    1991-01-01

    A design approach developed over the past few years to formalize redundancy management and validation is described. Redundant elements are partitioned into individual fault-containment regions (FCRs). An FCR is a collection of components that operates correctly regardless of any arbitrary logical or electrical fault outside the region. Conversely, a fault in an FCR cannot cause hardware outside the region to fail. The outputs of all channels are required to agree bit-for-bit under no-fault conditions (exact bitwise consensus). Synchronization, input agreement, and input validity conditions are discussed. The Advanced Information Processing System (AIPS), which is a fault-tolerant distributed architecture based on this approach, is described. A brief overview of recent applications of these systems and current research is presented.

  4. Multicriteria approach for the improvement of energy systems design

    International Nuclear Information System (INIS)

    Giannantoni, C.; Lazzaretto, A.; Macor, A.; Mirandola, A.; Stoppato, A.; Tonon, S.; Ulgiati, S.

    2005-01-01

    An iterative procedure is suggested to evaluate and improve the energy system design. The procedure considers the information deriving from complementary evaluation approaches, each applied within its appropriate time-space window of interest: (a) Process-related, local-scale methods (Energy, Exergy and Thermoeconomic analyses); (b) Environmental assessment methods (Impact Assessment, Emergy Synthesis); (c) Economic methods (Micro- and Macro-Economic and Externality Evaluations). Process-related methods are applied first, in order to provide local-scale performance indicators able to suggest optimization procedures from a user-side point of view. Environmental evaluation approaches are then used to judge the overall environmental quality of the design, in the largest regional and biosphere scales. Finally, micro- and macro-economic evaluation approaches are applied in order to ascertain the soundness of the proposed solution as far as the economic return on the investment as well as global benefits to the Society are concerned. New choices for the design configuration and parameters may be suggested by implementing the iterative procedure. A cogeneration system working in a town of Northern Italy is used as a case study: starting from the present configuration of the plant, modifications are suggested and evaluated, thus identifying the way for improving the performance under various viewpoints. A proposal for plant transformation from Steam Cycle to Combined Cycle is suggested, capable of increasing the plant electric power from 136 to 332 MWe, increasing the energy efficiency from 60 to 63%, increasing the exergy efficiency from 37 to 49%, and decreasing the overall demand for environmental support (transformity) from 1.84x10 5 to 1.27x10 5 seJ/J. The paper points out several benefits and bottlenecks of the existing plant and of the proposed solutions

  5. Operating system design the Xinu approach, Linksys version

    CERN Document Server

    Press, CRC

    2011-01-01

    Introduction and OverviewOperating SystemsApproach Used In The TextA Hierarchical DesignThe Xinu Operating SystemWhat An Operating System Is NotAn Operating System Viewed From The OutsideRemainder Of The TextConcurrent Execution And Operating System ServicesProgramming Models For Multiple ActivitiesOperating System ServicesConcurrent Processing Concepts And TerminologyDistinction Between Sequential And Concurrent ProgramsMultiple Processes Sharing A Single Piece Of CodeProcess Exit And Process TerminationShared Memory, Race Conditions, And SynchronizationSemaphores And Mutual ExclusionType Nam

  6. Societal risk approach to safeguards design and evaluation

    International Nuclear Information System (INIS)

    Murphey, W.M.; Sherr, T.S.; Bennett, C.A.

    1975-01-01

    A comprehensive rationale for safeguards design and evaluation, and a framework for continuing systematic assessment of the system's effectiveness and efficient allocation of available safeguards resources for balanced protection, were developed. The societal risk approach employed considers the likelihood of successful destructive acts involving nuclear materials or facilities and the magnitude of the effects on society. The safeguards problem is described in terms of events affecting societal risk and adversary actions. Structure of the safeguards system and the evaluation of its adequacy are discussed. Adversary characteristics are also discussed

  7. Design of Multithreaded Software The Entity-Life Modeling Approach

    CERN Document Server

    Sandén, Bo I

    2011-01-01

    This book assumes familiarity with threads (in a language such as Ada, C#, or Java) and introduces the entity-life modeling (ELM) design approach for certain kinds of multithreaded software. ELM focuses on "reactive systems," which continuously interact with the problem environment. These "reactive systems" include embedded systems, as well as such interactive systems as cruise controllers and automated teller machines.Part I covers two fundamentals: program-language thread support and state diagramming. These are necessary for understanding ELM and are provided primarily for reference. P

  8. APPROACH ON INTELLIGENT OPTIMIZATION DESIGN BASED ON COMPOUND KNOWLEDGE

    Institute of Scientific and Technical Information of China (English)

    Yao Jianchu; Zhou Ji; Yu Jun

    2003-01-01

    A concept of an intelligent optimal design approach is proposed, which is organized by a kind of compound knowledge model. The compound knowledge consists of modularized quantitative knowledge, inclusive experience knowledge and case-based sample knowledge. By using this compound knowledge model, the abundant quantity information of mathematical programming and the symbolic knowledge of artificial intelligence can be united together in this model. The intelligent optimal design model based on such a compound knowledge and the automatically generated decomposition principles based on it are also presented. Practically, it is applied to the production planning, process schedule and optimization of production process of a refining & chemical work and a great profit is achieved. Specially, the methods and principles are adaptable not only to continuous process industry, but also to discrete manufacturing one.

  9. Designing e-learning solutions with a client centred approach

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Nielsen, Janni; Levinsen, Karin

    2008-01-01

      This paper claims that the strategies applied in designing e-learning solutions tend to focus on how to proceed after the precondition, e.g., learners requirements, pedagogical choice, etc., have been decided upon. Investigating the HCI research field, we find that the methodological approaches...... as the organisation that has initiated the e-learning project and needs to manage the e-learning system after its development. Through the Client Centred Design and in close collaboration with the client, three strategic issues are uncovered and strategic models are presented for each. These models are complementary...... perspectives in a Client Centred framework that is useable as the starting point for others in developing large scale e-learning projects....

  10. A Morphogenetic Design Approach with Embedded Structural Analysis

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Kirkegaard, Poul Henning; Holst, Malene Kirstine

    2010-01-01

    The present paper explores a morphogenetic design approach with embedded structural analysis for architectural design. A material system based on a combined space truss and membrane system has been derived as a growth system with inspiration from natural growth of plants. The structural system...... is capable of adding new elements based on a structural analysis of the existing components and their internal stress levels. A GA decision-making procedure that control the generation of the growth cycles is introduced. This evaluation and generation loop is capable of successfully making decisions based...... on several, and often conflicting, inputs formulated from architectural requirements. An experiment with a tri-pyramid component has been considered, but many other space truss systems could be explored in the same manner and result in highly performative outcomes. not only with respect to the structural...

  11. Surface laser marking optimization using an experimental design approach

    Science.gov (United States)

    Brihmat-Hamadi, F.; Amara, E. H.; Lavisse, L.; Jouvard, J. M.; Cicala, E.; Kellou, H.

    2017-04-01

    Laser surface marking is performed on a titanium substrate using a pulsed frequency doubled Nd:YAG laser ( λ= 532 nm, τ pulse=5 ns) to process the substrate surface under normal atmospheric conditions. The aim of the work is to investigate, following experimental and statistical approaches, the correlation between the process parameters and the response variables (output), using a Design of Experiment method (DOE): Taguchi methodology and a response surface methodology (RSM). A design is first created using MINTAB program, and then the laser marking process is performed according to the planned design. The response variables; surface roughness and surface reflectance were measured for each sample, and incorporated into the design matrix. The results are then analyzed and the RSM model is developed and verified for predicting the process output for the given set of process parameters values. The analysis shows that the laser beam scanning speed is the most influential operating factor followed by the laser pumping intensity during marking, while the other factors show complex influences on the objective functions.

  12. A Multidisciplinary Approach to Mixer-Ejector Analysis and Design

    Science.gov (United States)

    Hendricks, Eric, S.; Seidel, Jonathan, A.

    2012-01-01

    The design of an engine for a civil supersonic aircraft presents a difficult multidisciplinary problem to propulsion system engineers. There are numerous competing requirements for the engine, such as to be efficient during cruise while yet quiet enough at takeoff to meet airport noise regulations. The use of mixer-ejector nozzles presents one possible solution to this challenge. However, designing a mixer-ejector which will successfully address both of these concerns is a difficult proposition. Presented in this paper is an integrated multidisciplinary approach to the analysis and design of these systems. A process that uses several low-fidelity tools to evaluate both the performance and acoustics of mixer-ejectors nozzles is described. This process is further expanded to include system-level modeling of engines and aircraft to determine the effects on mission performance and noise near airports. The overall process is developed in the OpenMDAO framework currently being developed by NASA. From the developed process, sample results are given for a notional mixer-ejector design, thereby demonstrating the capabilities of the method.

  13. New approaches to optimization in aerospace conceptual design

    Science.gov (United States)

    Gage, Peter J.

    1995-01-01

    Aerospace design can be viewed as an optimization process, but conceptual studies are rarely performed using formal search algorithms. Three issues that restrict the success of automatic search are identified in this work. New approaches are introduced to address the integration of analyses and optimizers, to avoid the need for accurate gradient information and a smooth search space (required for calculus-based optimization), and to remove the restrictions imposed by fixed complexity problem formulations. (1) Optimization should be performed in a flexible environment. A quasi-procedural architecture is used to conveniently link analysis modules and automatically coordinate their execution. It efficiently controls a large-scale design tasks. (2) Genetic algorithms provide a search method for discontinuous or noisy domains. The utility of genetic optimization is demonstrated here, but parameter encodings and constraint-handling schemes must be carefully chosen to avoid premature convergence to suboptimal designs. The relationship between genetic and calculus-based methods is explored. (3) A variable-complexity genetic algorithm is created to permit flexible parameterization, so that the level of description can change during optimization. This new optimizer automatically discovers novel designs in structural and aerodynamic tasks.

  14. Computational approaches in the design of synthetic receptors - A review.

    Science.gov (United States)

    Cowen, Todd; Karim, Kal; Piletsky, Sergey

    2016-09-14

    The rational design of molecularly imprinted polymers (MIPs) has been a major contributor to their reputation as "plastic antibodies" - high affinity robust synthetic receptors which can be optimally designed, and produced for a much reduced cost than their biological equivalents. Computational design has become a routine procedure in the production of MIPs, and has led to major advances in functional monomer screening, selection of cross-linker and solvent, optimisation of monomer(s)-template ratio and selectivity analysis. In this review the various computational methods will be discussed with reference to all the published relevant literature since the end of 2013, with each article described by the target molecule, the computational approach applied (whether molecular mechanics/molecular dynamics, semi-empirical quantum mechanics, ab initio quantum mechanics (Hartree-Fock, Møller-Plesset, etc.) or DFT) and the purpose for which they were used. Detailed analysis is given to novel techniques including analysis of polymer binding sites, the use of novel screening programs and simulations of MIP polymerisation reaction. The further advances in molecular modelling and computational design of synthetic receptors in particular will have serious impact on the future of nanotechnology and biotechnology, permitting the further translation of MIPs into the realms of analytics and medical technology. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Pharmaceutical product development: A quality by design approach

    Science.gov (United States)

    Pramod, Kannissery; Tahir, M. Abu; Charoo, Naseem A.; Ansari, Shahid H.; Ali, Javed

    2016-01-01

    The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development. PMID:27606256

  16. Design approaches for access plugs in a basalt repository

    International Nuclear Information System (INIS)

    O'Rourke, J.; Allirot, D.; O'Connor, K.

    1982-01-01

    This paper describes research, laboratory testing, and analytical approaches taken toward the development of designs for sealing boreholes, shafts, and tunnels penetrating from ground surface to a deep, mined nuclear waste repository in basalt. A material selection process leading to identification of preferred sealing materials is discussed, and the laboratory testing program to define the geochemical and geotechnical performance of these materials is described. Analysis of the environmental conditions in the Columbia Plateau basalt flows leads to identification of tentative design criteria for plug systems. These design criteria include performance of the plug as a hydraulic barrier and as a radionuclide barrier. An important problem for effective performance of a plug system as a hydraulic barrier is shown to be a potentially disturbed zone surrounding the excavation in the stressed and jointed host rock. An idealized one-dimensional numerical model is described for analyzing the performance of the plug as a barrier to radionuclide transport. The preliminary analyses led to the conclusion that the composition and dimensions of practical candidate plugs can satisfy both hydraulic and radionuclide barrier criteria. Examples of candidate designs are shown for boreholes, shafts, and tunnels. 9 references, 6 figures, 6 tables

  17. Pharmaceutical product development: A quality by design approach.

    Science.gov (United States)

    Pramod, Kannissery; Tahir, M Abu; Charoo, Naseem A; Ansari, Shahid H; Ali, Javed

    2016-01-01

    The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development.

  18. A Road Map for Knowledge Management Systems Design Using Axiomatic Design Approach

    Directory of Open Access Journals (Sweden)

    Houshmand Mahmoud

    2017-01-01

    Full Text Available Successful design and implementation of knowledge management systems have been the main concern of many researchers. It has been reported that more than 50% of knowledge management systems have failed, therefore, it is required to seek for a new and comprehensive scientific approach to design and implement it. In the design and implementation of a knowledge management system, it is required to know ’what we want to achieve’ and ’how and by what processes we will achieve it’. A literature review conducted and axiomatic design theory selected for this purpose. For the first time, this paper develops a conceptual design of knowledge management systems by means of a hierarchical structure, composed of ’Functional Requirements’ (FRs, ’Design Parameters’ (DPs, and ’Process Variables’ (PVs. The intersection of several studies conducted in the field of knowledge management systems has been used to design the knowledge management model. It reveals that six essential bases of knowledge management are organizational culture, organizational structure, human resources, management and leadership, information technology, and the external environment of the organization; that are represented as top DPs in the structure of the model. These essential factors are decomposed to lower levels by means of zigzagging. The model implemented in Tehran Urban and Suburban Railway Operation Corporation (TUSROC and the results were very promising. The most important result of this study is a roadmap to design successful and efficient knowledge management systems.

  19. Safety Design Approach for the Development of Safety Requirements for Design of Commercial HTGR

    International Nuclear Information System (INIS)

    Ohashi, Hirofumi; Sato, Hiroyuki; Nakagawa, Shigeaki; Tachibana, Yukio; Nishihara, Tetsuo; Yan, Xing; Sakaba, Nariaki; Kunitomi, Kazuhiko

    2014-01-01

    The research committee on “Safety requirements for HTGR design” was established in 2013 under the Atomic Energy Society of Japan to develop the draft safety requirements for the design of commercial High Temperature Gas-cooled Reactors (HTGRs), which incorporate the HTGR safety features demonstrated using the High Temperature Engineering Test Reactor (HTTR), lessons learned from the accident of Fukushima Daiichi Nuclear Power Station and requirements for the integration of the hydrogen production plants. The safety design approach for the commercial HTGRs which is a basement of the safety requirements is determined prior to the development of the safety requirements. The safety design approaches for the commercial HTGRs are to confine the radioactive materials within the coated fuel particles not only during normal operation but also during accident conditions, and the integrity of the coated fuel particles and other requiring physical barriers are protected by the inherent and passive safety features. This paper describes the main topics of the research committee, the safety design approaches and the safety functions of the commercial HTGRs determined in the research committee. (author)

  20. COMPARISON OF THE TRADITIONAL STRENGTH OF MATERIALS APPROACH TO DESIGN WITH THE FRACTURE MECHANICS APPROACH

    International Nuclear Information System (INIS)

    Z. Ceylan

    2002-01-01

    The objective of this activity is to show that the use of the traditional strength of materials approach to the drip shield and the waste package (WP) designs is bounding and appropriate when compared to the fracture mechanics approach. The scope of this activity is limited to determining the failure assessment diagrams for the two materials at issue: Ti-7 and Alloy 22. This calculation is intended for use in support of the license application design of the drip shield and the WP. This activity is associated with the drip shield and the WP designs. The activity evaluation for work package number P32 12234F2, included in ''Technical Work Plan for: Waste Package Design Description for LA'' (Ref. 1, p. A-6), has determined that the development of this document is subject to ''Quality Assurance Requirements and Description'' requirements. The control of the electronic management of data is accomplished in accordance with the methods specified in Reference 1, Section 10. AP-3.124, ''Design Calculations and Analysis'' (Ref. 2), is used to develop and document the calculation

  1. Monotone viable trajectories for functional differential inclusions

    Science.gov (United States)

    Haddad, Georges

    This paper is a study on functional differential inclusions with memory which represent the multivalued version of retarded functional differential equations. The main result gives a necessary and sufficient equations. The main result gives a necessary and sufficient condition ensuring the existence of viable trajectories; that means trajectories remaining in a given nonempty closed convex set defined by given constraints the system must satisfy to be viable. Some motivations for this paper can be found in control theory where F( t, φ) = { f( t, φ, u)} uɛU is the set of possible velocities of the system at time t, depending on the past history represented by the function φ and on a control u ranging over a set U of controls. Other motivations can be found in planning procedures in microeconomics and in biological evolutions where problems with memory do effectively appear in a multivalued version. All these models require viability constraints represented by a closed convex set.

  2. Design of pressure vessels using shape optimization: An integrated approach

    Energy Technology Data Exchange (ETDEWEB)

    Carbonari, R.C., E-mail: ronny@usp.br [Department of Mechatronic Engineering, Escola Politecnica da Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231 Sao Paulo, SP 05508-900 (Brazil); Munoz-Rojas, P.A., E-mail: pablo@joinville.udesc.br [Department of Mechanical Engineering, Universidade do Estado de Santa Catarina, Bom Retiro, Joinville, SC 89223-100 (Brazil); Andrade, E.Q., E-mail: edmundoq@petrobras.com.br [CENPES, PDP/Metodos Cientificos, Petrobras (Brazil); Paulino, G.H., E-mail: paulino@uiuc.edu [Newmark Laboratory, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 205 North Mathews Av., Urbana, IL 61801 (United States); Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 158 Mechanical Engineering Building, 1206 West Green Street, Urbana, IL 61801-2906 (United States); Nishimoto, K., E-mail: knishimo@usp.br [Department of Naval Architecture and Ocean Engineering, Escola Politecnica da Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231 Sao Paulo, SP 05508-900 (Brazil); Silva, E.C.N., E-mail: ecnsilva@usp.br [Department of Mechatronic Engineering, Escola Politecnica da Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231 Sao Paulo, SP 05508-900 (Brazil)

    2011-05-15

    Previous papers related to the optimization of pressure vessels have considered the optimization of the nozzle independently from the dished end. This approach generates problems such as thickness variation from nozzle to dished end (coupling cylindrical region) and, as a consequence, it reduces the optimality of the final result which may also be influenced by the boundary conditions. Thus, this work discusses shape optimization of axisymmetric pressure vessels considering an integrated approach in which the entire pressure vessel model is used in conjunction with a multi-objective function that aims to minimize the von-Mises mechanical stress from nozzle to head. Representative examples are examined and solutions obtained for the entire vessel considering temperature and pressure loading. It is noteworthy that different shapes from the usual ones are obtained. Even though such different shapes may not be profitable considering present manufacturing processes, they may be competitive for future manufacturing technologies, and contribute to a better understanding of the actual influence of shape in the behavior of pressure vessels. - Highlights: > Shape optimization of entire pressure vessel considering an integrated approach. > By increasing the number of spline knots, the convergence stability is improved. > The null angle condition gives lower stress values resulting in a better design. > The cylinder stresses are very sensitive to the cylinder length. > The shape optimization of the entire vessel must be considered for cylinder length.

  3. Design approach for safe tritium handling in ITER

    International Nuclear Information System (INIS)

    Ohira, Shigeru

    2002-01-01

    Outlines for tritium handling and a fundamental approach for ensuring safety are presented. The amount of tritium stored and processed in the ITER facility will be much larger than that in the existing facilities for fusion research, though the processing methods and the conditions of processing (e.g., concentration, pressure, etc.) will be similar for those used in those facilities. Therefore, considerations to be taken for tritium handling, such as limitations of tritium permeation and leaks, provision of an appropriate ventilation/detritiation system for maintenance, measures to ensure mechanical integrity, etc., can be provided based on the knowledge obtained in the facilities. The Technical Advisory Committee of the Science and Technology Agency established a fundamental approach in 2000, and set out the basic safety principles and approaches as technical requirements of safety design and assessment, which were derived from the safety characteristics of the ITER plant. Sufficient prevention of accidents can be achieved by ensuring and maintaining the structural integrity of the enclosures containing radioactive materials against the loads anticipated during operation, and a low hazard potential of radioactive materials, sufficiently within prescribed limits, can be maintained by the vitiation and clean-up system even if large release is postulated. (author)

  4. Optimum Design and Operation of Cyclic Storage Systems; Lumped Approach

    Directory of Open Access Journals (Sweden)

    Leila Ostadrahimi

    2007-01-01

    Full Text Available Conjunctive use of surface and groundwater resources is a preferred approach in water resources management. Compared to dam construction, groundwater has certain advantages, among which are less costs, less sedimentation and evaporation, fewer water quality problems, and less social and cultural problems. To reduce the major problems associated with the development of large-scale surface impoundment systems, cyclic storage systems can be used as an alternative. A cyclic storage system (CYCS is an integrated interactive system consisting of two subsystems of surface water storage (reservoir and groundwater; this system together with artificial recharge is able to satisfy the predefined demands with rather high reliability. In order to optimize these systems, one must consider the hydraulic interactions between all the components, but unfortunately it has been neglected in many studies. In this article, a nonlinear optimization model for design and operation of cyclic storage systems has been developed using the lumped approach. In order to evaluate the model, its results have been compared with the results of a model in which distributed approach had been deployed, and so the efficiency of lumped models to solve the problems of cyclic storage systems has been investigated.

  5. Regulation of Viable and Optimal Cohorts

    Energy Technology Data Exchange (ETDEWEB)

    Aubin, Jean-Pierre, E-mail: aubin.jp@gmail.com [VIMADES (Viabilité, Marchés, Automatique, Décisions) (France)

    2015-10-15

    This study deals with the evolution of (scalar) attributes (resources or income in evolutionary demography or economics, position in traffic management, etc.) of a population of “mobiles” (economic agents, vehicles, etc.). The set of mobiles sharing the same attributes is regarded as an instantaneous cohort described by the number of its elements. The union of instantaneous cohorts during a mobile window between two attributes is a cohort. Given a measure defining the number of instantaneous cohorts, the accumulation of the mobile attributes on a evolving mobile window is the measure of the cohort on this temporal mobile window. Imposing accumulation constraints and departure conditions, this study is devoted to the regulation of the evolutions of the attributes which are1.viable in the sense that the accumulations constraints are satisfied at each instant;2.and, among them, optimal, in the sense that both the duration of the temporal mobile window is maximum and that the accumulation on this temporal mobile window is the largest viable one. This value is the “accumulation valuation” function. Viable and optimal evolutions under accumulation constraints are regulated by an “implicit Volterra integro-differential inclusion” built from the accumulation valuation function, solution to an Hamilton–Jacobi–Bellman partial differential equation under constraints which is constructed for this purpose.

  6. Rethinking Physics for Biologists: A design-based research approach

    Science.gov (United States)

    Sawtelle, Vashti

    2015-03-01

    Biology majors at the University of Maryland are required to take courses in biology, chemistry, and physics - but they often see these courses as disconnected. Over the past three years the NEXUS/Physics course has been working to develop an interdisciplinary learning environment that bridges the disciplinary domains of biology and physics. Across the three years we have gone from teaching in a small class with one instructor to teaching in a large lecture hall with multiple instructors. We have used a design-based research approach to support critical reflection of the course at multiple-time scales. In this presentation I will detail our process of collecting systematic data, listening to and valuing students' reasoning, and bridging diverse perspectives led. I will demonstrate how this process led to improved curricular design, refined assessment objectives, and new design heuristics. This work is supported by NSF-TUES DUE 11-22818, the HHMI NEXUS grant, and a NSF Graduate Research Fellowship (DGE 0750616).

  7. SoC Design Approach Using Convertibility Verification

    Directory of Open Access Journals (Sweden)

    Basu Samik

    2008-01-01

    Full Text Available Abstract Compositional design of systems on chip from preverified components helps to achieve shorter design cycles and time to market. However, the design process is affected by the issue of protocol mismatches, where two components fail to communicate with each other due to protocol differences. Convertibility verification, which involves the automatic generation of a converter to facilitate communication between two mismatched components, is a collection of techniques to address protocol mismatches. We present an approach to convertibility verification using module checking. We use Kripke structures to represent protocols and the temporal logic to describe desired system behavior. A tableau-based converter generation algorithm is presented which is shown to be sound and complete. We have developed a prototype implementation of the proposed algorithm and have used it to verify that it can handle many classical protocol mismatch problems along with SoC problems. The initial idea for -based convertibility verification was presented at SLA++P '07 as presented in the work by Roopak Sinha et al. 2008.

  8. Factorial Design Approach in Proportioning Prestressed Self-Compacting Concrete.

    Science.gov (United States)

    Long, Wu-Jian; Khayat, Kamal Henri; Lemieux, Guillaume; Xing, Feng; Wang, Wei-Lun

    2015-03-13

    In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of -1 to +1, eight axial mixtures were prepared at extreme values of -2 and +2 with the other variables maintained at the central points. Four replicate central mixtures were also evaluated. The effects of five mixture parameters, including binder type, binder content, dosage of viscosity-modifying admixture (VMA), water-cementitious material ratio (w/cm), and sand-to-total aggregate ratio (S/A) on compressive strength, modulus of elasticity, as well as autogenous and drying shrinkage are discussed. The applications of the models to better understand trade-offs between mixture parameters and carry out comparisons among various responses are also highlighted. A logical design approach would be to use the existing model to predict the optimal design, and then run selected tests to quantify the influence of the new binder on the model.

  9. RF control at SSCL - an object oriented design approach

    International Nuclear Information System (INIS)

    Dohan, D.A.; Osberg, E.; Biggs, R.; Bossom, J.; Chillara, K.; Richter, R.; Wade, D.

    1994-01-01

    The Superconducting Super Collider (SSC) in Texas, the construction of which was stopped in 1994, would have represented a major challenge in accelerator research and development. This paper addresses the issues encountered in the parallel design and construction of the control systems for the RF equipment for the five accelerators comprising the SSC. An extensive analysis of the components of the RF control systems has been undertaken, based upon the Schlaer-Mellor object-oriented analysis and design (OOA/OOD) methodology. The RF subsystem components such as amplifiers, tubes, power supplies, PID loops, etc. were analyzed to produce OOA information, behavior and process models. Using these models, OOD was iteratively applied to develop a generic RF control system design. This paper describes the results of this analysis and the development of 'bridges' between the analysis objects, and the EPICS-based software and underlying VME-based hardware architectures. The application of this approach to several of the SSCL RF control systems is discussed. ((orig.))

  10. Signage by Design: A Design-Thinking Approach to Library User Experience

    Directory of Open Access Journals (Sweden)

    Edward Luca

    2016-01-01

    Full Text Available Signage is a powerful visual tool for communication and a crucial component of the library user experience. Signage can welcome, guide, instruct, and delight users, helping them navigate the complex information world of any library. In practice, however, signage can be problematic, revealing tensions between various stakeholders, and contributing to visual noise through information overload; this often leads to signage blindness, library anxiety, and confusion. This article explores how libraries can use a design-thinking approach to improve the user experience in physical library spaces, particularly with respect to signage, based on our experience at the UTS Library, a university library in Australia that serves the University of Technology Sydney (UTS. We found that a design-thinking approach that uses the processes of empathy, problem definition, solution ideation, prototyping, and testing, can help libraries make significant and meaningful changes that can be adopted at relatively low cost.

  11. User involvement in the design of human-computer interactions: some similarities and differences between design approaches

    NARCIS (Netherlands)

    Bekker, M.M.; Long, J.B.

    1998-01-01

    This paper presents a general review of user involvement in the design of human-computer interactions, as advocated by a selection of different approaches to design. The selection comprises User-Centred Design, Participatory Design, Socio-Technical Design, Soft Systems Methodology, and Joint

  12. Regional Design Approach in Designing Climatic Responsive Administrative Building in the 21st Century

    Science.gov (United States)

    Haja Bava Mohidin, Hazrina Binti; Ismail, Alice Sabrina

    2015-01-01

    The objective of this paper is to explicate on the study of modern administrative building in Malaysia which portrays regional design approach that conforms to the local context and climate by reviewing two case studies; Perdana Putra (1999) and former Prime Minister's Office (1967). This paper is significant because the country's stature and political statement was symbolized by administrative building as a national icon. In other words, it is also viewed as a cultural object that is closely tied to a particular social context and nation historical moment. Administrative building, therefore, may exhibit various meanings. This paper uses structuralism paradigm and semiotic principles as a methodological approach. This paper is of importance for practicing architects and society in the future as it offers new knowledge and understanding in identifying the suitable climatic consideration that may reflect regionalist design approach in modern administrative building. These elements then may be adopted in designing public buildings in the future with regional values that are important for expressing national culture to symbolize the identity of place and society as well as responsive to climate change.

  13. Regional Design Approach in Designing Climatic Responsive Administrative Building in the 21st Century

    International Nuclear Information System (INIS)

    Mohidin, Hazrina Binti Haja Bava; Ismail, Alice Sabrina

    2015-01-01

    The objective of this paper is to explicate on the study of modern administrative building in Malaysia which portrays regional design approach that conforms to the local context and climate by reviewing two case studies; Perdana Putra (1999) and former Prime Minister's Office (1967). This paper is significant because the country's stature and political statement was symbolized by administrative building as a national icon. In other words, it is also viewed as a cultural object that is closely tied to a particular social context and nation historical moment. Administrative building, therefore, may exhibit various meanings. This paper uses structuralism paradigm and semiotic principles as a methodological approach. This paper is of importance for practicing architects and society in the future as it offers new knowledge and understanding in identifying the suitable climatic consideration that may reflect regionalist design approach in modern administrative building. These elements then may be adopted in designing public buildings in the future with regional values that are important for expressing national culture to symbolize the identity of place and society as well as responsive to climate change

  14. Designing synthetic networks in silico: a generalised evolutionary algorithm approach.

    Science.gov (United States)

    Smith, Robert W; van Sluijs, Bob; Fleck, Christian

    2017-12-02

    Evolution has led to the development of biological networks that are shaped by environmental signals. Elucidating, understanding and then reconstructing important network motifs is one of the principal aims of Systems & Synthetic Biology. Consequently, previous research has focused on finding optimal network structures and reaction rates that respond to pulses or produce stable oscillations. In this work we present a generalised in silico evolutionary algorithm that simultaneously finds network structures and reaction rates (genotypes) that can satisfy multiple defined objectives (phenotypes). The key step to our approach is to translate a schema/binary-based description of biological networks into systems of ordinary differential equations (ODEs). The ODEs can then be solved numerically to provide dynamic information about an evolved networks functionality. Initially we benchmark algorithm performance by finding optimal networks that can recapitulate concentration time-series data and perform parameter optimisation on oscillatory dynamics of the Repressilator. We go on to show the utility of our algorithm by finding new designs for robust synthetic oscillators, and by performing multi-objective optimisation to find a set of oscillators and feed-forward loops that are optimal at balancing different system properties. In sum, our results not only confirm and build on previous observations but we also provide new designs of synthetic oscillators for experimental construction. In this work we have presented and tested an evolutionary algorithm that can design a biological network to produce desired output. Given that previous designs of synthetic networks have been limited to subregions of network- and parameter-space, the use of our evolutionary optimisation algorithm will enable Synthetic Biologists to construct new systems with the potential to display a wider range of complex responses.

  15. A Design Approach to Teaching Persuasion: Theory and Application.

    Science.gov (United States)

    Neal, W. Patrick; And Others

    One course in persuasion reviews six theories of attitude change--five based on Otto Lerbinger's designs for persuasive communication (cognitive design, stimulus response design, motivational design, personality design, and social design), and a sixth (perceptual design) developed by the instructors. Instruction in each includes a variety of…

  16. Computer Forensics for Graduate Accountants: A Motivational Curriculum Design Approach

    Directory of Open Access Journals (Sweden)

    Grover Kearns

    2010-06-01

    Full Text Available Computer forensics involves the investigation of digital sources to acquire evidence that can be used in a court of law. It can also be used to identify and respond to threats to hosts and systems. Accountants use computer forensics to investigate computer crime or misuse, theft of trade secrets, theft of or destruction of intellectual property, and fraud. Education of accountants to use forensic tools is a goal of the AICPA (American Institute of Certified Public Accountants. Accounting students, however, may not view information technology as vital to their career paths and need motivation to acquire forensic knowledge and skills. This paper presents a curriculum design methodology for teaching graduate accounting students computer forensics. The methodology is tested using perceptions of the students about the success of the methodology and their acquisition of forensics knowledge and skills. An important component of the pedagogical approach is the use of an annotated list of over 50 forensic web-based tools.

  17. Fuzzy Axiomatic Design approach based green supplier selection

    DEFF Research Database (Denmark)

    Kannan, Devika; Govindan, Kannan; Rajendran, Sivakumar

    2015-01-01

    proposes a multi-criteria decision-making (MCDM) approach called Fuzzy Axiomatic Design (FAD) to select the best green supplier for Singapore-based plastic manufacturing company. At first, the environmental criteria was developed along with the traditional criteria based on the literature review......Abstract Green Supply Chain Management (GSCM) is a developing concept recently utilized by manufacturing firms of all sizes. All industries, small or large, seek improvements in the purchasing of raw materials, manufacturing, allocation, transportation efficiency, in curbing storage time, importing...... responsible in addition to being efficiently managed. A significant way to implement responsible GSCM is to reconsider, in innovative ways, the purchase and supply cycle, and a preliminary step would be to ensure that the supplier of goods successfully incorporates green criteria. Therefore, this paper...

  18. Simulation approaches to probabilistic structural design at the component level

    International Nuclear Information System (INIS)

    Stancampiano, P.A.

    1978-01-01

    In this paper, structural failure of large nuclear components is viewed as a random process with a low probability of occurrence. Therefore, a statistical interpretation of probability does not apply and statistical inferences cannot be made due to the sparcity of actual structural failure data. In such cases, analytical estimates of the failure probabilities may be obtained from stress-strength interference theory. Since the majority of real design applications are complex, numerical methods are required to obtain solutions. Monte Carlo simulation appears to be the best general numerical approach. However, meaningful applications of simulation methods suggest research activities in three categories: methods development, failure mode models development, and statistical data models development. (Auth.)

  19. A design thinking approach to evaluating interprofessional education.

    Science.gov (United States)

    Cahn, Peter S; Bzowyckyj, Andrew; Collins, Lauren; Dow, Alan; Goodell, Kristen; Johnson, Alex F; Klocko, David; Knab, Mary; Parker, Kathryn; Reeves, Scott; Zierler, Brenda K

    2016-05-01

    The complex challenge of evaluating the impact of interprofessional education (IPE) on patient and community health outcomes is well documented. Recently, at the Radcliffe Institute for Advanced Study in the United States, leaders in health professions education met to help generate a direction for future IPE evaluation research. Participants followed the stages of design thinking, a process for human-centred problem solving, to reach consensus on recommendations. The group concluded that future studies should focus on measuring an intermediate step between learning activities and patient outcomes. Specifically, knowing how IPE-prepared students and preceptors influence the organisational culture of a clinical site as well as how the culture of clinical sites influences learners' attitudes about collaborative practice will demonstrate the value of educational interventions. With a mixed methods approach and an appreciation for context, researchers will be able to identify the factors that foster effective collaborative practice and, by extension, promote patient-centred care.

  20. An Approach to Automated Fusion System Design and Adaptation

    Directory of Open Access Journals (Sweden)

    Alexander Fritze

    2017-03-01

    Full Text Available Industrial applications are in transition towards modular and flexible architectures that are capable of self-configuration and -optimisation. This is due to the demand of mass customisation and the increasing complexity of industrial systems. The conversion to modular systems is related to challenges in all disciplines. Consequently, diverse tasks such as information processing, extensive networking, or system monitoring using sensor and information fusion systems need to be reconsidered. The focus of this contribution is on distributed sensor and information fusion systems for system monitoring, which must reflect the increasing flexibility of fusion systems. This contribution thus proposes an approach, which relies on a network of self-descriptive intelligent sensor nodes, for the automatic design and update of sensor and information fusion systems. This article encompasses the fusion system configuration and adaptation as well as communication aspects. Manual interaction with the flexibly changing system is reduced to a minimum.

  1. An Approach to Automated Fusion System Design and Adaptation.

    Science.gov (United States)

    Fritze, Alexander; Mönks, Uwe; Holst, Christoph-Alexander; Lohweg, Volker

    2017-03-16

    Industrial applications are in transition towards modular and flexible architectures that are capable of self-configuration and -optimisation. This is due to the demand of mass customisation and the increasing complexity of industrial systems. The conversion to modular systems is related to challenges in all disciplines. Consequently, diverse tasks such as information processing, extensive networking, or system monitoring using sensor and information fusion systems need to be reconsidered. The focus of this contribution is on distributed sensor and information fusion systems for system monitoring, which must reflect the increasing flexibility of fusion systems. This contribution thus proposes an approach, which relies on a network of self-descriptive intelligent sensor nodes, for the automatic design and update of sensor and information fusion systems. This article encompasses the fusion system configuration and adaptation as well as communication aspects. Manual interaction with the flexibly changing system is reduced to a minimum.

  2. A product-service system approach to telehealth application design.

    Science.gov (United States)

    Flores-Vaquero, Paul; Tiwari, Ashutosh; Alcock, Jeffrey; Hutabarat, Windo; Turner, Chris

    2016-06-01

    A considerable proportion of current point-of-care devices do not offer a wide enough set of capabilities if they are to function in any telehealth system. There is a need for intermediate devices that lie between healthcare devices and service networks. The development of an application is suggested that allows for a smartphone to take the role of an intermediate device. This research seeks to identify the telehealth service requirements for long-term condition management using a product-service system approach. The use of product-service system has proven to be a suitable methodology for the design and development of telehealth smartphone applications. © The Author(s) 2014.

  3. An integrated approach to route selection in slurry pipeline design

    Energy Technology Data Exchange (ETDEWEB)

    Betinol, Roy G.; Altmann, Nara [Brass Chile S.A., Santiago (Chile)

    2009-12-19

    The pressure to get engineering projects done and constructed as fast as possible in order to take advantage of the high prices in metals and petrochemicals has been driving companies to skip the conceptual phase and go straight into basic engineering with cost estimates in the level of 15% accuracy. By-passing early engineering and demanding higher cost estimating accuracy is a contradiction. In most cases, savings made on capital investment is much higher had money been spent in conceptual studies which allow for the optimal solution to be found. This paper reviews one of the key aspects in conceptual engineering of slurry pipeline designs: route selection. This activity is often overlooked, causing capital cost and operating difficulties to rise unnecessarily. This paper describes and gives example on how an integrated client/engineering company's approach to route selection can produce significant savings in pipeline construction and operating costs. (author)

  4. A Novel Evolutionary Engineering Design Approach for Mixed-Domain Systems

    DEFF Research Database (Denmark)

    Fan, Zhun; Hu, J.; Seo, K.

    2004-01-01

    This paper presents an approach to engineering design of mixed-domain dynamic systems. The approach aims at system-level design and has two key features: first, it generates engineering designs that satisfy predefined specifications in an automatic manner; second, it can design systems belonging ...... often encountered in evolutionary computation, a HFC (Hierarchical Fair Competition) model is adopted in this work. Examples of an analog filter design and a MEM filter design illustrate the application of the approach....

  5. New approach to design of ceramic/polymer material compounds

    International Nuclear Information System (INIS)

    Todt, A; Nestler, D; Trautmann, M; Wagner, G

    2016-01-01

    The damage tolerance of carbon fibre-reinforced ceramic-matrix composite materials depends on their porosity and can be rather significant. Complex structures are difficult to produce. The integration of simple geometric structures of ceramic-matrix composite materials in complex polymer-based hybrid structures is a possible approach of realising those structures. These hybrid material compounds, produced in a cost-efficient way, combine the different advantages of the individual components in one hybrid material compound. In addition the individual parts can be designed to fit a specific application and the resulting forces. All these different advantages result in a significant reduction of not only the production costs and the production time, but also opens up new areas of application, such as the large-scale production of wear-resistant and chemically inert, energy dampening components for reactors or in areas of medicine. The low wettability of the ceramic component however is a disadvantage of this approach. During the course of this contribution, different C/C composite materials with a specific porosity were produced, while adjusting the resin/hardening agent-ratio, as well as the processing parameters. After the production, different penetration tests were conducted with a polymer component. The final part of the article is comprised of the microstructural analysis and the explanation of the mechanical relationships. (paper)

  6. Matrix approach for the design of service delivery systems

    Directory of Open Access Journals (Sweden)

    Dina Davis-Castro

    2017-04-01

    Full Text Available The gradual change that is occurring from a purely functional approach to one of process, is conditioned from outside and from within organizations. The world changes faster, from one to the next decade. The politic-economic, social and technological conditions of the first half of the 20th century in the world in general, and in Latin America in particular, are far from the last 50 years of the 20th century. The number of changes that have occurred in the first 15 years of the 21st century is also immeasurable. There is a close relationship between the speed of technological change and changes in a good measure socioeconomic.  It leads to uncertain ways of planning the organizations.  Insofar as the cycles innovation - development are shortened, there is a gap between the appearance of products with superior performance in the market and the duration of similar goods previously acquired by users. This phenomenon shows a trend in the behavior of customers. Clients tends to request services solutions, rather than on specific products.  This essay examines some of the phenomena that affect the design of processes of services with a matrix approach, Result of research carried out in this field.

  7. Nuclear safety approach for PWRs design and operation

    International Nuclear Information System (INIS)

    Vignon, D.

    1988-01-01

    The implementation of France's major nuclear programme - 56 PWR units in service or under construction - has gone hand in hand with the development of an original philosophy in the field of nuclear safety. From an initial core of deterministic safety philosophy current in the seventies, which has been wholly retained and in some instances refined, a range of additions has been made to include consideration of a number of additional situations based on a probabilistic approach. This has resulted in a better coherence for safety and a mitigation of the severe accident probability. Furthermore, the establishment of emergency plans has enabled the Safety Authorities and the operator to adopt a coherent and logical approach to severe accidents with the aim of achieving greater defence in depth, this has resulted in the provision of certain additional measures designed to further reduce the consequences of severe accidents. This paper describes the culmination of this work, as exemplified in the new 1 400MWe - N4 advanced plant series currently under construction, of which the essential elements are also incorporated into all previous units, thereby giving them an equivalent level of safety. This now constitutes the French safety policy with respect to PWR nuclear units

  8. INSCAN PRO: a fast ultraviolet spectrometer design approach

    Science.gov (United States)

    Myer, Brian Walker; Dias, João. Mendanha

    2013-11-01

    Spectroscopy diagnostic techniques have applications in such diverse areas as mechanical and aerospace engineering, physical chemistry, optics, food and pharmaceutical industries. However, the technological state-of-the-art spectrometers do not allow very fast processes to be evaluated or controlled. This ability is crucial in the optimization of industrial processes (welding, burning flames, spark ignition, pulsed radiolysis…) where more theoretical-experimental analysis should be performed. The INSCAN project aims to overcome this technological limitation, to satisfy needs in academia and industrial markets, by developing a compact spectrometer with focal lengths less than 200 mm, taking into account three important aspects: acquisition rate of approximately 10 kHz spectra, spectral resolution on the order of 0.1 nm and operating in the spectral range 200 nm to 700 nm. Initial work is described on the optical design of the device and several possible approaches to achieve the specifications are considered. To guide the first order design, we relate the optical linewidth, spectral bandwidth and imaging properties to component characteristics. The symmetrical Czerny-Turner optical mount was chosen for its flexibility and elaborated using ZEMAX. Predictions made based on the simulated system are compared with calibration and characterization measurements on an experimental test bench used to refine the model assumptions.

  9. Electrostatic Discharge Current Linear Approach and Circuit Design Method

    Directory of Open Access Journals (Sweden)

    Pavlos K. Katsivelis

    2010-11-01

    Full Text Available The Electrostatic Discharge phenomenon is a great threat to all electronic devices and ICs. An electric charge passing rapidly from a charged body to another can seriously harm the last one. However, there is a lack in a linear mathematical approach which will make it possible to design a circuit capable of producing such a sophisticated current waveform. The commonly accepted Electrostatic Discharge current waveform is the one set by the IEC 61000-4-2. However, the over-simplified circuit included in the same standard is incapable of producing such a waveform. Treating the Electrostatic Discharge current waveform of the IEC 61000-4-2 as reference, an approximation method, based on Prony’s method, is developed and applied in order to obtain a linear system’s response. Considering a known input, a method to design a circuit, able to generate this ESD current waveform in presented. The circuit synthesis assumes ideal active elements. A simulation is carried out using the PSpice software.

  10. Optimization of minoxidil microemulsions using fractional factorial design approach.

    Science.gov (United States)

    Jaipakdee, Napaphak; Limpongsa, Ekapol; Pongjanyakul, Thaned

    2016-01-01

    The objective of this study was to apply fractional factorial and multi-response optimization designs using desirability function approach for developing topical microemulsions. Minoxidil (MX) was used as a model drug. Limonene was used as an oil phase. Based on solubility, Tween 20 and caprylocaproyl polyoxyl-8 glycerides were selected as surfactants, propylene glycol and ethanol were selected as co-solvent in aqueous phase. Experiments were performed according to a two-level fractional factorial design to evaluate the effects of independent variables: Tween 20 concentration in surfactant system (X1), surfactant concentration (X2), ethanol concentration in co-solvent system (X3), limonene concentration (X4) on MX solubility (Y1), permeation flux (Y2), lag time (Y3), deposition (Y4) of MX microemulsions. It was found that Y1 increased with increasing X3 and decreasing X2, X4; whereas Y2 increased with decreasing X1, X2 and increasing X3. While Y3 was not affected by these variables, Y4 increased with decreasing X1, X2. Three regression equations were obtained and calculated for predicted values of responses Y1, Y2 and Y4. The predicted values matched experimental values reasonably well with high determination coefficient. By using optimal desirability function, optimized microemulsion demonstrating the highest MX solubility, permeation flux and skin deposition was confirmed as low level of X1, X2 and X4 but high level of X3.

  11. A combinatorial approach to the design of vaccines.

    Science.gov (United States)

    Martínez, Luis; Milanič, Martin; Legarreta, Leire; Medvedev, Paul; Malaina, Iker; de la Fuente, Ildefonso M

    2015-05-01

    We present two new problems of combinatorial optimization and discuss their applications to the computational design of vaccines. In the shortest λ-superstring problem, given a family S1,...,S(k) of strings over a finite alphabet, a set Τ of "target" strings over that alphabet, and an integer λ, the task is to find a string of minimum length containing, for each i, at least λ target strings as substrings of S(i). In the shortest λ-cover superstring problem, given a collection X1,...,X(n) of finite sets of strings over a finite alphabet and an integer λ, the task is to find a string of minimum length containing, for each i, at least λ elements of X(i) as substrings. The two problems are polynomially equivalent, and the shortest λ-cover superstring problem is a common generalization of two well known combinatorial optimization problems, the shortest common superstring problem and the set cover problem. We present two approaches to obtain exact or approximate solutions to the shortest λ-superstring and λ-cover superstring problems: one based on integer programming, and a hill-climbing algorithm. An application is given to the computational design of vaccines and the algorithms are applied to experimental data taken from patients infected by H5N1 and HIV-1.

  12. Axenic isolation of viable Giardia muris trophozoites.

    Science.gov (United States)

    Tillotson, K D; Buret, A; Olson, M E

    1991-06-01

    Large numbers of viable Giardia muris trophozoites were isolated from the duodenum of experimentally infected mice 6 days after inoculation with 1,000 G. muris cysts. A series of shaking, incubation, and washing steps in the presence of the broad-spectrum antibiotic piperacillin readily provided 4.9 +/- 1.5 x 10(5) G. muris trophozoites per mouse, free of detectable contaminant organisms. Anaerobic and microaerophilic culturing and scanning electron microscopy demonstrated axenic status and high purity of the isolates. The viability of trophozoites was 98 +/- 2%. Application of this technique should permit novel immunological and epidemiological analyses of G. muris infection and biochemical investigations of this protozoan parasite.

  13. Shared Emotional Values in Sustainable Clothing Design Approaches

    DEFF Research Database (Denmark)

    Durrani, Marium; Petersen, Louise Ravnløkke Munk; Niinimäki, Kirsi

    2016-01-01

    Recent sustainable initiatives in fashion companies are framing design practices that challenge the traditional role of clothing designers. This preliminary study aims to open discussion on challenging traditional clothing design, through an exploration of the shared emotional values between user...... and designers, when designing for longevity....

  14. Usage-Centered Design Approach in Design of Malaysia Sexuality Education (MSE) Courseware

    Science.gov (United States)

    Chan, S. L.; Jaafar, A.

    The problems amongst juveniles increased every year, especially rape case of minor. Therefore, the government of Malaysia has introduced the National Sexuality Education Guideline on 2005. An early study related to the perception of teachers and students toward the sexuality education curriculum taught in secondary schools currently was carried out in 2008. The study showed that there are big gaps between the perception of the teachers and the students towards several issues of Malaysia sexuality education today. The Malaysia Sexuality Education (MSE) courseware was designed based on few learning theories approach. Then MSE was executed through a comprehensive methodology which the model ADDIE integrated with Usage-Centered Design to achieve high usability courseware. In conclusion, the effort of developing the MSE is hopefully will be a solution to the current problem that happens in Malaysia sexuality education now.

  15. A statistical approach to nuclear fuel design and performance

    Science.gov (United States)

    Cunning, Travis Andrew

    As CANDU fuel failures can have significant economic and operational consequences on the Canadian nuclear power industry, it is essential that factors impacting fuel performance are adequately understood. Current industrial practice relies on deterministic safety analysis and the highly conservative "limit of operating envelope" approach, where all parameters are assumed to be at their limits simultaneously. This results in a conservative prediction of event consequences with little consideration given to the high quality and precision of current manufacturing processes. This study employs a novel approach to the prediction of CANDU fuel reliability. Probability distributions are fitted to actual fuel manufacturing datasets provided by Cameco Fuel Manufacturing, Inc. They are used to form input for two industry-standard fuel performance codes: ELESTRES for the steady-state case and ELOCA for the transient case---a hypothesized 80% reactor outlet header break loss of coolant accident. Using a Monte Carlo technique for input generation, 105 independent trials are conducted and probability distributions are fitted to key model output quantities. Comparing model output against recognized industrial acceptance criteria, no fuel failures are predicted for either case. Output distributions are well removed from failure limit values, implying that margin exists in current fuel manufacturing and design. To validate the results and attempt to reduce the simulation burden of the methodology, two dimensional reduction methods are assessed. Using just 36 trials, both methods are able to produce output distributions that agree strongly with those obtained via the brute-force Monte Carlo method, often to a relative discrepancy of less than 0.3% when predicting the first statistical moment, and a relative discrepancy of less than 5% when predicting the second statistical moment. In terms of global sensitivity, pellet density proves to have the greatest impact on fuel performance

  16. A social sustainability approach to birth environment design

    DEFF Research Database (Denmark)

    Jangaard, Karin; Folmer, Mette Blicher

    RESEARCH PROCESS Measuring on welness, lifequality and experience of user involvement in all processes. DESIGN PROCESS Research and design thinking USERINVOLVEMENT Ownership of design solutions CARE MODEL / ORGANISATION Humanity, vison for care and tre......RESEARCH PROCESS Measuring on welness, lifequality and experience of user involvement in all processes. DESIGN PROCESS Research and design thinking USERINVOLVEMENT Ownership of design solutions CARE MODEL / ORGANISATION Humanity, vison for care and tre...

  17. Molecular Dynamics Approach in Designing Thermostable Aspergillus niger Xylanase

    Science.gov (United States)

    Malau, N. D.; Sianturi, M.

    2017-03-01

    Molecular dynamics methods we have applied as a tool in designing thermostable Aspergillus niger Xylanase, by examining Root Mean Square Deviation (RMSD) and The Stability of the Secondary Structure of enzymes structure at its optimum temperature and compare with its high temperature behavior. As RMSD represents structural fluctuation at a particular temperature, a better understanding of this factor will suggest approaches to bioengineer these enzymes to enhance their thermostability. In this work molecular dynamic simulations of Aspergillus niger xylanase (ANX) have been carried at 400K (optimum catalytic temperature) for 2.5 ns and 500K (ANX reported inactive temperature) for 2.5 ns. Analysis have shown that the Root Mean Square Deviation (RMSD) significant increase at higher temperatures compared at optimum temperature and some of the secondary structures of ANX that have been damaged at high temperature. Structural analysis revealed that the fluctuations of the α-helix and β-sheet regions are larger at higher temperatures compared to the fluctuations at optimum temperature.

  18. Strategic approaches to CBRN decontamination research design and investment

    International Nuclear Information System (INIS)

    Jutro, P.

    2009-01-01

    Research funding is society's investment in its future, but in difficult economic times, investment in anything with a less than immediate payoff can be a challenge. Making federal research investment decisions for large scale issues with political, social, and economic consequences has always involved competition for available resources played out in universities, Federal executive departments and agencies, and in the authorizing and appropriating committees and subcommittees of the legislature. Designing a research program that relates to the national need for a long-term strategic approach to consequence management is a challenge in the natural and social sciences as well as in political analysis. A successful effort must involve intensive interactions by research managers with consequence managers, evaluation of the relative cost and potential effectiveness of alternative research strategies, an estimation of time to completion and potential for success of research, and having a common understanding of roles and responsibilities of national and local governments, as well as private enterprise and affected individuals. All this must be undertaken in concert with the development of risk communication strategies that are science-based but deal with managing societal expectations based on the costs and practicality of potential alternative suites of solutions.(author)

  19. A modelling approach to designing microstructures in thermal barrier coatings

    International Nuclear Information System (INIS)

    Gupta, M.; Nylen, P.; Wigren, J.

    2013-01-01

    Thermomechanical properties of Thermal Barrier Coatings (TBCs) are strongly influenced by coating defects, such as delaminations and pores, thus making it essential to have a fundamental understanding of microstructure-property relationships in TBCs to produce a desired coating. Object-Oriented Finite element analysis (OOF) has been shown previously as an effective tool for evaluating thermal and mechanical material behaviour, as this method is capable of incorporating the inherent material microstructure as input to the model. In this work, OOF was used to predict the thermal conductivity and effective Young's modulus of TBC topcoats. A Design of Experiments (DoE) was conducted by varying selected parameters for spraying Yttria-Stabilised Zirconia (YSZ) topcoat. The microstructure was assessed with SEM, and image analysis was used to characterize the porosity content. The relationships between microstructural features and properties predicted by modelling are discussed. The microstructural features having the most beneficial effect on properties were sprayed with a different spray gun so as to verify the results obtained from modelling. Characterisation of the coatings included microstructure evaluation, thermal conductivity and lifetime measurements. The modelling approach in combination with experiments undertaken in this study was shown to be an effective way to achieve coatings with optimised thermo-mechanical properties.

  20. Hydrophobic polymers for orodispersible films: a quality by design approach.

    Science.gov (United States)

    Borges, Ana Filipa; Silva, Branca M A; Silva, Cláudia; Coelho, Jorge F J; Simões, Sérgio

    2016-10-01

    To develop orodispersible films (ODF) based on hydrophobic polymers with higher stability to ordinary environmental humidity conditions without compromising their fast disintegration time. A quality by design approach was applied to screen three different formulations each one based on a different hydrophobic polymer: polyvinyl acetate, methacrylate-based copolymer and shellac. The screening formulations were characterized regarding their mechanical properties, residual water content, disintegration time and appearance, in order to find a suitable ODF formulation according to established critical quality attributes. The selected critical process parameters for the selection of appropriate ODF formulations were the percentage of the different excipients and the plasticizer type. Three hydrophobic-based matrices with fast disintegration were developed. These were generically composed by a hydrophobic polymer, a stabilizer, a disintegrant and a plasticizer. It verified that the common components within the three different formulations behave differently depending on the system/chemical environment that they were included. It was shown that it is possible to develop oral films based on hydrophobic polymers with fast disintegration time, good texture and appearance, breaking a paradigm of the ODF research field.

  1. A general approach for optimal kinematic design of 6-DOF parallel ...

    Indian Academy of Sciences (India)

    Optimal kinematic design of parallel manipulators is a challenging problem. In this work, an attempt has been made to present a generalized approach of kinematic design for a 6-legged parallel manipulator, by considering only the minimally required design parameters. The same approach has been used to design a ...

  2. Senior health clinics: are they financially viable?

    Science.gov (United States)

    McAtee, Robin E; Crandall, Debra; Wright, Larry D; Beverly, Claudia J

    2009-07-01

    Are hospital-based outpatient interdisciplinary clinics a financially viable alternative for caring for our burgeoning population of older adults in America? Although highly popular, with high patient satisfaction rates among older adults and their families, senior health clinics (SHCs) can be expensive to operate, with limited quantifiable health outcomes. This study analyzed three geriatric hospital-based interdisciplinary clinics in rural Arkansas by examining their patient profiles, revenues, and expenses. It closely examined the effects of the downstream revenue using the multiplier effect and acknowledged other factors that weigh heavily on the success of SHCs and the care of older adults. The findings highlight the similarities and differences in the three clinics' operating and financial structures in addition to the clinics' and providers' productivity. The analysis presents an evidence-based illustration that SHCs can break even or lose large amounts of money.

  3. Roots of success: cultivating viable community forestry

    Energy Technology Data Exchange (ETDEWEB)

    MacQueen, Duncan

    2009-05-15

    Is community forestry emerging from the shadows? The evidence shows that locally controlled enterprises can be economically viable, and often build on stronger social and environmental foundations than the big private-sector players. Certainly this is an industry in need of a shakeup. Many forests have become flashpoints where agro-industry, large-scale logging concerns and conservation interests clash, while forest-dependent communities are left out in the cold. Meanwhile, governments – driven by concerns over the climate impacts of deforestation – are having to gear up for legal, sustainable forestry production. Community forestry could be crucial to solving many of these challenges. By building on local core capabilities and developing strategic partnerships, they are forging key new business models that could transform the sector.

  4. Introduce of Viable But Nonculturable Bacteria

    Directory of Open Access Journals (Sweden)

    Mehdi Hassanshahian

    2008-03-01

    Full Text Available Viable-But-Nonculturable-State (VBNC is the condition in which bacteria fail to grow on their routine bacteriological media where they would normally grow and develop into colonies, but are still alive and capable of renewed metabolic activity. VBNC state is useful for evaluating public health and for ascertaining the sterility of drinking water, pharmaceuticals, and foodstuff. A number of bacteria, mostly pathogenic to humans, have been proved to enter into this state in response to natural stresses such as starvation, incubation out of optimum growth temperature, increased osmotic pressure, etc. Once in the VBNC state, they undergo various physiological, structural, and genetic alterations. These alterations result in reduced cell size, conversion from bacilli to coccid, thickened cell walls, and peptidoglycan gaining many cross links. Metabolic changes also occur that include reductions in growth, nutrient transport, and respiratory rate; biosynthesis of new protein, and ATP remaining at a constant level. It has been shown that in the VBNC state, some pathogens conserve their virulence properties. Gene expression continues in the VBNC cell. Nucleic acids remain intact in the early VBNC phase but they gradually undergo degradation with prolonged VBNC. Cytological methods such as direct viable count and reduction of tetrazolium salts, and molecular methods such as reverse transcription polymerase chain reaction and green fluorescent protein have been used for the study of VBNC. Resuscitation from VBNC state starts when the inducing factor(s is/are lifted. Factors that help the resuscitation of VBNC bacteria include addition of certain nutrients and chemicals, introduction of a few culturable cells into the VBNC cell population, and passage through the animal host. As virulence properties are sustained during the VBNC phase, special care must be paid when evaluating sterility of drinking water.

  5. A Contradiction-Based Approach for Innovative Product Design

    Directory of Open Access Journals (Sweden)

    Ko Yao-Tsung

    2016-01-01

    Full Text Available Without creativity in design there is no potential for innovation. This paper investigates the role of contradictions in enhancing creativity in product design. Based on the inventive principles of TRIZ, this paper presents a novel design method by integrating technical and physical contradiction analysis methods into the conceptual design activities of new product development (NPD. Despite the recognized importance of innovative design, there is a lack of the systematic and effective design-thinking process that can covers all conceptual design activities. To address this gap, a sharper and fundamental model of the problem-solving is created for innovative product design based on the contradiction-oriented concept. Eventually, one case study is employed to illustrate the method and the result validates that it can help designers produce more creative outcomes in product design.

  6. Keeping the medical practice financially viable: a marketer's approach.

    Science.gov (United States)

    Patrick, Michelle L; Capraro, Anthony J; Credito, Candace M

    2002-01-01

    This paper explores a way that medical practices might develop a higher margin revenue source by offering a differentiated service that caters to patients who value more personalized service. Using SERVQUAL, German patients were surveyed to determine if there is a relationship between a desire for personalized service and a willingness to pay a premium for medical care. The results indicate that a greater desire for personalized care distinguishes those who pay a premium for medical care from those who do not. This suggests that medical practices can differentiate their service based on more personalized care and charge a higher fee for this service.

  7. Polymerase chain reaction-based discrimination of viable from non-viable Mycoplasma gallisepticum

    Directory of Open Access Journals (Sweden)

    Ching Giap Tan

    2014-09-01

    Full Text Available The present study was based on the reverse transcription polymerase chain reaction (RT-PCR of the 16S ribosomal nucleic acid (rRNA of Mycoplasma for detection of viable Mycoplasma gallisepticum. To determine the stability of M. gallisepticum 16S rRNA in vitro, three inactivation methods were used and the suspensions were stored at different temperatures. The 16S rRNA of M. gallisepticum was detected up to approximately 20–25 h at 37 °C, 22–25 h at 16 °C, and 23–27 h at 4 °C. The test, therefore, could detect viable or recently dead M. gallisepticum (< 20 h. The RT-PCR method was applied during an in vivo study of drug efficacy under experimental conditions, where commercial broiler-breeder eggs were inoculated with M. gallisepticum into the yolk. Hatched chicks that had been inoculated in ovo were treated with Macrolide 1. The method was then applied in a flock of day 0 chicks with naturally acquired vertical transmission of M. gallisepticum, treated with Macrolide 2. Swabs of the respiratory tract were obtained for PCR and RT-PCR evaluations to determine the viability of M. gallisepticum. This study proved that the combination of both PCR and RT-PCR enables detection and differentiation of viable from non-viable M. gallisepticum.

  8. Enumeration of viable and non-viable larvated Ascaris eggs with quantitative PCR

    Science.gov (United States)

    Aims: The goal of the study was to further develop an incubation-qPCR method for quantifying viable Ascaris eggs. The specific objectives were to characterize the detection limit and number of template copies per egg, determine the specificity of the method, and test the method w...

  9. Explaining the Criteria of Designing Urban Furniture and Landscape, with a Cultural-social Design Approach

    Directory of Open Access Journals (Sweden)

    Marzieh Allahdadi

    2017-09-01

    Full Text Available Attention to the deep relationship between human personality and the place in which he lives causes the place to play a crucial role in cultural transformations and prevalence of human life style and formation of values, connections and human activities. Cities are not just a place of transit, but they are also environments that must have mutual communications with the inhabitants in order to realize the meaning of citizen, as there is a distinction between the status of citizenship and urbanization. Urban furniture is one of the elements of urban space that its quantity, beauty and durability play a major role in achieving a healthy and favorable city and satisfies the needs of citizens in terms of performance and beauty. Accordingly, the present study, using descriptive-analytical method and with data collection tools including library and documentary studies, examines the concept of product ecology and answers to the questions whether urban furniture can start or support social interaction or positively affect the roles of citizens? In this paper, the relationship between social-cultural design in urban furniture and the disturbances regarding uneven distribution of elements are identified, and finally the criteria of designing urban furniture and landscape are expressed with a social-design approach.

  10. Evaluation of vertical profiles to design continuous descent approach procedure

    Science.gov (United States)

    Pradeep, Priyank

    The current research focuses on predictability, variability and operational feasibility aspect of Continuous Descent Approach (CDA), which is among the key concepts of the Next Generation Air Transportation System (NextGen). The idle-thrust CDA is a fuel economical, noise and emission abatement procedure, but requires increased separation to accommodate for variability and uncertainties in vertical and speed profiles of arriving aircraft. Although a considerable amount of researches have been devoted to the estimation of potential benefits of the CDA, only few have attempted to explain the predictability, variability and operational feasibility aspect of CDA. The analytical equations derived using flight dynamics and Base of Aircraft and Data (BADA) Total Energy Model (TEM) in this research gives insight into dependency of vertical profile of CDA on various factors like wind speed and gradient, weight, aircraft type and configuration, thrust settings, atmospheric factors (deviation from ISA (DISA), pressure and density of the air) and descent speed profile. Application of the derived equations to idle-thrust CDA gives an insight into sensitivity of its vertical profile to multiple factors. This suggests fixed geometric flight path angle (FPA) CDA has higher degree of predictability and lesser variability at the cost of non-idle and low thrust engine settings. However, with optimized design this impact can be overall minimized. The CDA simulations were performed using Future ATM Concept Evaluation Tool (FACET) based on radar-track and aircraft type data (BADA) of the real air-traffic to some of the busiest airports in the USA (ATL, SFO and New York Metroplex (JFK, EWR and LGA)). The statistical analysis of the vertical profiles of CDA shows 1) mean geometric FPAs derived from various simulated vertical profiles are consistently shallower than 3° glideslope angle and 2) high level of variability in vertical profiles of idle-thrust CDA even in absence of

  11. A Model of Human Variability in Viable Ship Design

    Science.gov (United States)

    2014-02-21

    education and organization level and percentage of recruited team members also contribute to teamwork schema agreement; similarity in gender and age...standard in operational command centers and other workplace environments. Over time or due to the situation, workload levels may exceed some critical...Increased workload may also reveal inequities in the distribution of workload; depending on team members’ roles and responsibilities, some individuals may be

  12. DESIGNING COMPANY PERFORMANCE MEASUREMENT SYSTEM USING BALANCE SCORECARD APPROACH

    Directory of Open Access Journals (Sweden)

    Cecep Mukti Soleh

    2015-05-01

    Full Text Available This research aimed to design how to measure company performance by using balance scorecard approach in coal transportation services industry. Depth interview was used to obtain qualitative data determination of strategic objectives, key performance indicators, strategic initiatives, and in charge units for each balanced scorecard perspectives while the quantitative data were obtained from weighting through questionnaires and analyzed using paired comparison to get a perspective what mostly affected the performance of the company. To measure the achievement of corporate performance, each KPI used (1 the scoring system with the methods that higher is better, lower is better and precise is better; (2 traffic light system with the help of green, yellow, red for identification of target achievement. This research result shows that in the balance scorecard perspective, the most influences on the overall performance of the company include the customer's perspective (31%, financial perspective (29%, internal business processes (21%, learning, and growth 19%. Keywords: balance scorecard, paired comparison, coal transportation serviceABSTRAKPenelitian ini bertujuan untuk merancang pengukuran kinerja perusahaan dengan menggunakan pendekatan balance scorecard di industri jasa pengangkutan batu bara. Data kualitatif diperoleh melalui indepth interview digunakan untuk menentukan sasaran strategik, indikator kinerja utama, inisiatif strategi dan penanggungjawab setiap divisi setiap perspektif balance scorecard, sedangkan data kuantitatif digunakan untuk pembobotan melalui kuesioner dan dianalisis dengan menggunakan metode paired comparisson untuk mendapatkan perspektif yang paling berpengaruh terhadap kinerja perusahaan. Ukuran pencapaian kinerja perusahaan dari setiap KPI menggunakan; (1 scoring system dengan bantuan metode higher is better, lower is better dan precise is better;(2 traffic light system dengan menggunakan bantuan warna hijau, kuning, merah

  13. Reliability Coupled Sensitivity Based Design Approach for Gravity Retaining Walls

    Science.gov (United States)

    Guha Ray, A.; Baidya, D. K.

    2012-09-01

    Sensitivity analysis involving different random variables and different potential failure modes of a gravity retaining wall focuses on the fact that high sensitivity of a particular variable on a particular mode of failure does not necessarily imply a remarkable contribution to the overall failure probability. The present paper aims at identifying a probabilistic risk factor ( R f ) for each random variable based on the combined effects of failure probability ( P f ) of each mode of failure of a gravity retaining wall and sensitivity of each of the random variables on these failure modes. P f is calculated by Monte Carlo simulation and sensitivity analysis of each random variable is carried out by F-test analysis. The structure, redesigned by modifying the original random variables with the risk factors, is safe against all the variations of random variables. It is observed that R f for friction angle of backfill soil ( φ 1 ) increases and cohesion of foundation soil ( c 2 ) decreases with an increase of variation of φ 1 , while R f for unit weights ( γ 1 and γ 2 ) for both soil and friction angle of foundation soil ( φ 2 ) remains almost constant for variation of soil properties. The results compared well with some of the existing deterministic and probabilistic methods and found to be cost-effective. It is seen that if variation of φ 1 remains within 5 %, significant reduction in cross-sectional area can be achieved. But if the variation is more than 7-8 %, the structure needs to be modified. Finally design guidelines for different wall dimensions, based on the present approach, are proposed.

  14. Towards a visual modeling approach to designing microelectromechanical system transducers

    Science.gov (United States)

    Dewey, Allen; Srinivasan, Vijay; Icoz, Evrim

    1999-12-01

    In this paper, we address initial design capture and system conceptualization of microelectromechanical system transducers based on visual modeling and design. Visual modeling frames the task of generating hardware description language (analog and digital) component models in a manner similar to the task of generating software programming language applications. A structured topological design strategy is employed, whereby microelectromechanical foundry cell libraries are utilized to facilitate the design process of exploring candidate cells (topologies), varying key aspects of the transduction for each topology, and determining which topology best satisfies design requirements. Coupled-energy microelectromechanical system characterizations at a circuit level of abstraction are presented that are based on branch constitutive relations and an overall system of simultaneous differential and algebraic equations. The resulting design methodology is called visual integrated-microelectromechanical VHDL-AMS interactive design (VHDL-AMS is visual hardware design language for analog and mixed signal).

  15. A Simple Approach to Study Designs in Complex Biochemical ...

    Indian Academy of Sciences (India)

    Somdatta Sinha

    Protein sequences. • Biochemical & Genetic information. REVERSE ENGINEERING. LARGE NETWORKS. FORWARD ENGINEERING. All designs that are not physically forbidden are realizable, but not all realizable designs are functionally effective. (in relation to context and constraints of the system and environment).

  16. Environmental Approach In Interior Design Education In Turkey

    Directory of Open Access Journals (Sweden)

    Derya Adıgüzel

    2013-12-01

    Full Text Available These days there has been a severe encroachment on nature, a large amount of waste being generated, and natural resources being used irresponsibly during the design, application and usage phases of buildings. Environmental sensitivity is necessary during the construction of new buildings and re-usage of current buildings to resolve environmental problems. In order to increase environmental sensitivity, a great responsibility falls onto interior design along with other disciplines during the creation of living spaces. The accumulation of knowledge from career training and the level of awareness will determine the practical development of environmentally sensitive interior design. Therefore the purpose of this article is to make a determination of the current state of environmental design in interior design education in Turkey. The degree to which environmental design is reflected in the curricula of interior design departments was studied. The relationship between the awareness level of the students and the educational programs will be presented through three samples. Surveys were conducted at three universities that have varying degrees of environmental design within the interior design curricula. As a result, the importance of having an environmentally conscious design understanding within the curricula of interior design and recommendations for improving the environmental design awareness of students will be presented in this article.

  17. Collaborative design in education : evaluation of three approaches

    NARCIS (Netherlands)

    Leeuwen, van J.P.; Gassel, van F.J.M.; Otter, den A.F.H.J.; Duarte, J.P.; Sampaio, A.Z.

    2005-01-01

    Collaboration in design can take place in a physical, social space, in a distributed or virtual environment, or in a combination of both. Design teams use a range of ICT means to support both synchronous and asynchronous communication. While these tools are designed to facilitate collaboration, the

  18. A modular approach to the design of cold moderators

    International Nuclear Information System (INIS)

    Lucas, A.T.

    1998-01-01

    Cold moderators are usually designed to the specific requirements of the parent neutron source. However since all cryogenic moderators within a broad design envelope require certain common parameters, it should be possible to create a central core design served by smaller packages designed, or selected to satisfy a wide range of individual requirements. This paper describes a modular design philosophy that has been applied to two very different cold sources with only minor changes to two of the modules in the system. Both of the systems and the basic differences between them are described in detail

  19. Embedded Control System Design A Model Based Approach

    CERN Document Server

    Forrai, Alexandru

    2013-01-01

    Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging  the gap between theory and practice.  The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are face...

  20. Expert System Approach For Generating And Evaluating Engine Design Alternatives

    Science.gov (United States)

    Shen, Stewart N. T.; Chew, Meng-Sang; Issa, Ghassan F.

    1989-03-01

    Artificial intelligence is becoming an increasingly important subject of study for computer scientists, engineering designers, as well as professionals in other fields. Even though AI technology is a relatively new discipline, many of its concepts have already found practical applications. Expert systems, in particular, have made significant contributions to technologies in such fields as business, medicine, engineering design, chemistry, and particle physics. This paper describes an expert system developed to aid the mechanical designer with the preliminary design of variable-stroke internal-combustion engines. The expert system accomplished its task by generating and evaluating a large number of design alternatives represented in the form of graphs. Through the application of structural and design rules directly to the graphs, optimal and near optimal preliminary design configurations of engines are deduced.

  1. A Holistic Approach to Networked Information Systems Design and Analysis

    Science.gov (United States)

    2016-04-15

    attain quite substantial savings. 11. Optimal algorithms for energy harvesting in wireless networks. We use a Markov- decision-process (MDP) based...approach to obtain optimal policies for transmissions . The key advantage of our approach is that it holistically considers information and energy in a...Coding technique to minimize delays and the number of transmissions in Wireless Systems. As we approach an era of ubiquitous computing with information

  2. The Conceptual Mechanism for Viable Organizational Learning Based on Complex System Theory and the Viable System Model

    Science.gov (United States)

    Sung, Dia; You, Yeongmahn; Song, Ji Hoon

    2008-01-01

    The purpose of this research is to explore the possibility of viable learning organizations based on identifying viable organizational learning mechanisms. Two theoretical foundations, complex system theory and viable system theory, have been integrated to provide the rationale for building the sustainable organizational learning mechanism. The…

  3. ADOBE ILLUSTRATOR AND GIMP - AN APPROACH TO GARMENT DESIGN

    Directory of Open Access Journals (Sweden)

    INDRIE Liliana

    2016-05-01

    Full Text Available Designing clothes has become easier with the use of clothing design software. One of the most popular and basic software made for garments design is Adobe Illustrator. It enables designers and small to medium businesses to create clothing designs with easy access to all assets, including images, colors, brushes, and type styles. While Illustrator has all the necessary elements and features that are ideal for creating designer clothing, GIMP provides basic set of tools for image editing. When used in combination with one another, these two programs provide just about all the tools an apparel designer needs to draw fashion design sketches, technical flat sketches, CAD presentations, graphic artworks, design embroideries etc. In this paper we show how to use the instruments of those two software in order to draw a woman jacket’s garments components and to fill with texture the jacket created. By utilizing Illustrator’s Symbol we created libraries of jacket components (puller zipper, label, then the brushes to design the zipper detail. Finally, by a drag and drop we added the zipper, the zipper puller and the label. GIMP gave us access to precise fabric textures which make our output so realistic that you can almost touch the fabric.

  4. A new design approach to innovative spectrometers. Case study: TROPOLITE

    Science.gov (United States)

    Volatier, Jean-Baptiste; Baümer, Stefan; Kruizinga, Bob; Vink, Rob

    2014-05-01

    Designing a novel optical system is a nested iterative process. The optimization loop, from a starting point to final system is already mostly automated. However this loop is part of a wider loop which is not. This wider loop starts with an optical specification and ends with a manufacturability assessment. When designing a new spectrometer with emphasis on weight and cost, numerous iterations between the optical- and mechanical designer are inevitable. The optical designer must then be able to reliably produce optical designs based on new input gained from multidisciplinary studies. This paper presents a procedure that can automatically generate new starting points based on any kind of input or new constraint that might arise. These starting points can then be handed over to a generic optimization routine to make the design tasks extremely efficient. The optical designer job is then not to design optical systems, but to meta-design a procedure that produces optical systems paving the way for system level optimization. We present here this procedure and its application to the design of TROPOLITE a lightweight push broom imaging spectrometer.

  5. Consequence Based Design. An approach for integrating computational collaborative models (Integrated Dynamic Models) in the building design phase

    DEFF Research Database (Denmark)

    Negendahl, Kristoffer

    relies on various advancements in the area of integrated dynamic models. It also relies on the application and test of the approach in practice to evaluate the Consequence based design and the use of integrated dynamic models. As a result, the Consequence based design approach has been applied in five...... and define new ways to implement integrated dynamic models for the following project. In parallel, seven different developments of new methods, tools and algorithms have been performed to support the application of the approach. The developments concern: Decision diagrams – to clarify goals and the ability...... affect the design process and collaboration between building designers and simulationists. Within the limits of applying the approach of Consequence based design to five case studies, followed by documentation based on interviews, surveys and project related documentations derived from internal reports...

  6. An economically viable space power relay system

    Science.gov (United States)

    Bekey, Ivan; Boudreault, Richard

    1999-09-01

    This paper describes and analyzes the economics of a power relay system that takes advantage of recent technological advances to implement a system that is economically viable. A series of power relay systems are described and analyzed which transport power ranging from 1,250 megawatts to 5,000 megawatts, and distribute it to receiving sites at transcontinental distances. Two classes of systems are discussed—those with a single reflector and delivering all the power to a single rectenna, and a second type which has multiple reflectors and distributes it to 10 rectenna sites, sharing power among them. It is shown that when offering electricity at prices competitive to those prevalent in developed cities in the US that a low IRR is inevitable, and economic feasibility of a business is unlikely. However, when the target market is Japan where the prevalent electricity prices are much greater, that an IRR exceeding 65% is readily attainable. This is extremely attractive to potential investors, making capitalization of a venture likely. The paper shows that the capital investment required for the system can be less than 1 per installed watt, contributing less than 0.02 /KW-hr to the cost of energy provision. Since selling prices in feasible regions range from 0.18 to over 030 $/kW-hr, these costs are but a small fraction of the operating expenses. Thus a very large IRR is possible for such a business.

  7. Deletion of ultraconserved elements yields viable mice

    Energy Technology Data Exchange (ETDEWEB)

    Ahituv, Nadav; Zhu, Yiwen; Visel, Axel; Holt, Amy; Afzal, Veena; Pennacchio, Len A.; Rubin, Edward M.

    2007-07-15

    Ultraconserved elements have been suggested to retainextended perfect sequence identity between the human, mouse, and ratgenomes due to essential functional properties. To investigate thenecessities of these elements in vivo, we removed four non-codingultraconserved elements (ranging in length from 222 to 731 base pairs)from the mouse genome. To maximize the likelihood of observing aphenotype, we chose to delete elements that function as enhancers in amouse transgenic assay and that are near genes that exhibit markedphenotypes both when completely inactivated in the mouse as well as whentheir expression is altered due to other genomic modifications.Remarkably, all four resulting lines of mice lacking these ultraconservedelements were viable and fertile, and failed to reveal any criticalabnormalities when assayed for a variety of phenotypes including growth,longevity, pathology and metabolism. In addition more targeted screens,informed by the abnormalities observed in mice where genes in proximityto the investigated elements had been altered, also failed to revealnotable abnormalities. These results, while not inclusive of all thepossible phenotypic impact of the deleted sequences, indicate thatextreme sequence constraint does not necessarily reflect crucialfunctions required for viability.

  8. Design of an Evolutionary Approach for Intrusion Detection

    Directory of Open Access Journals (Sweden)

    Gulshan Kumar

    2013-01-01

    ensemble methods like bagging and boosting. In addition, the proposed approach is a generalized classification approach that is applicable to the problem of any field having multiple conflicting objectives, and a dataset can be represented in the form of labelled instances in terms of its features.

  9. Design approaches to achieve competitive LMFBR capital costs

    International Nuclear Information System (INIS)

    Arnold, W.H.; Ehrman, C.S.; Sharbaugh, J.E.; Young, W.H.

    1982-01-01

    Through analysis of the essential functional elements of an LMFBR, numerous ways were found to simplify system design, reduce the size of components and equipment, and eliminate some components and systems. The projected capital cost per net kW of this design is competitive with that of current PWRs. RandD programs and the construction and operation of CRBRP now are needed to prove out the features of this new design

  10. Model-Based approaches to Human-Automation Systems Design

    DEFF Research Database (Denmark)

    Jamieson, Greg A.; Andersson, Jonas; Bisantz, Ann

    2012-01-01

    Human-automation interaction in complex systems is common, yet design for this interaction is often conducted without explicit consideration of the role of the human operator. Fortunately, there are a number of modeling frameworks proposed for supporting this design activity. However...... (and reportedly one or two critics) can engage one another on several agreed questions about such frameworks. The goal is to aid non-aligned practitioners in choosing between alternative frameworks for their human-automation interaction design challenges....

  11. Design approaches for enhancing the engineering feasibility of tokamak power reactors

    International Nuclear Information System (INIS)

    Shannon, T.E.; Steiner, D.

    1977-01-01

    The design approach developed in the ORNL Fusion Power Demonstration Study is reviewed. The design concepts having greatest impact on reactor feasibility by the application of current or near term technology are described briefly. These are: blanket structural material, blanket coolant, power conversion system, and pulsed electrical system. Concepts relative to the approach taken to simplify the overall reactor design are listed

  12. A Balanced Theoretical and Empirical Approach for the Development of a Design Support Tool

    DEFF Research Database (Denmark)

    Jensen, Thomas Aakjær; Hansen, Claus Thorp

    1996-01-01

    The introduction of a new design support system may change the engineering designer's work situation. Therefore, it may not be possible to derive all the functionalities for a design support system from solely empirical studies of manual design work. Alternatively the design support system could ...... system, indicating a proposal for how to balance a theoretical and empirical approach. The result of this research will be utilized in the development of a Designer's Workbench to support the synthesis activity in mechanical design....

  13. Design with Concurrent Approach: Development and Flow Analysis ...

    African Journals Online (AJOL)

    Mould-making companies, who wish to maintain the competitive edge, desire to shorten both design and manufacturing leading times by applying a ... In this work, CAE tools have been used in the design stage to reduce the losses to obtain the shortened lead time, high quality and achieving low cost of the mould.

  14. Design for new business development : using an effectual approach?

    NARCIS (Netherlands)

    Reymen, I.M.M.J.

    2010-01-01

    For both managing as well as designing, there is increasingly a need to deal with high uncertainty, to keep control and at the same time be flexible and open for creativity. This position paper focuses on new business development processes, which are viewed as design processes. More specific, it

  15. A different approach to designing visual displays and workstations

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S.A.

    1995-06-01

    The material presented in this paper is based on two studies involving the design of visual displays based on the user`s perspective model of a system. The studies involve a methodology known as Neuro-Linguistic Programming (NLP), and its use in expanding design choices from the user`s ``model of the world,`` and the use of virtual reality.

  16. Architecture Design Approaches and Issues in Cross Layer Systems

    DEFF Research Database (Denmark)

    Cattoni, Andrea Fabio; Sørensen, Troels Bundgaard; Mogensen, Preben

    2012-01-01

    the traditional protocol stack design methodology. However, Cross Layer also carries a risk due to possibly unexpected and undesired effects. In this chapter we want to provide architecture designers with a set of tools and recommendations synthesized from an analysis of the state of art, but enriched...

  17. Heritage Inquiries: A Designerly Approach to Human Values

    DEFF Research Database (Denmark)

    Giaccardi, Elisa; Iversen, Ole Sejer

    into how we come together through separate understandings and attachments to artifacts, places, and events of the past as well as of the present. The aim of the workshop is to explore how design research in the heritage domain can contribute to human-centered interaction design, with a particular...

  18. A New Approach to Concrete Mix Design Using Computer Techniques

    African Journals Online (AJOL)

    In addition such a model can be used to generate data on mix proportions and their corresponding compressive strength, thereby furnishing useful information for general purpose, safe-ready-to-use mix design. Such data were generated and checked against values obtainable from standard mix design practice and found ...

  19. Cultural study in design : In search of a meaningful approach

    NARCIS (Netherlands)

    van Boeijen, A.G.C.

    2014-01-01

    Does the Circuit of Culture help design students to do a cultural study that is meaningful for their design project? Indeed, it provides a good view on the phenomenon culture, its complexity and how contemporary cultures can be studied, providing an overview and structure of the processes that

  20. Modelling conflict management in design: an explicit approach

    NARCIS (Netherlands)

    Brazier, F.M.; van Langen, P.H.G.; Treur, J.

    1995-01-01

    This paper focusses on how conflicts that arise during a design process and the management of conflicts can be modelled. A number of possible conflict types are distinguished and it is described how each of them can be detected during the design process, using an explicit meta-representation.

  1. Application of mechatronic design approach in a reconfigurable manufacturing environment

    CSIR Research Space (South Africa)

    Xing, B

    2008-12-01

    Full Text Available manufacturing system (FMS) do not longer meet the requirement of modern manufacturing. DMS were designed for mass production, while FMS was designed for batch manufacturing. These systems cannot address mass customization. There is a need for greater, more...

  2. Alternative designs of a superconducting synchronous generator: the Southampton approach

    OpenAIRE

    Goddard, K.F.; Lukasik, B.; Sykulski, J.K.

    2008-01-01

    The paper describes various designs undertaken at the University of Southampton for building both cored and coreless superconducting synchronous generators using high temperature superconducting (HTS) tapes. An overview of electromagnetic and mechanical design issues is presented and scalability is considered. Results are included for the full (original) size machine and extended to a double size unit.

  3. SusDesign - An approach for a sustainable process system design and its application to a thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Abul Hossain, K; Khan, F; Hawboldt, K [Mem University of Newfoundland, St John, NF (Canada). Faculty of Engineering & Applied Science

    2010-10-15

    This paper presents a structured process design approach, SusDesign, for the sustainable development of process systems. At each level of process design, design alternatives are generated using a number of thermodynamic tools and applying pollution prevention strategies followed by analysis, evaluation and screening processes for the selection of potential design options. The evaluation and optimization are carried out based on an integrated environmental and cost potential (IECP) index, which has been estimated with the IECP tool. The present paper also describes a flowsheet optimization technique developed using different thermodynamic tools such as exergy/energy analysis, heat and mass integration, and cogeneration/trigeneration in a systematic manner. The proposed SusDesign approach has been successfully implemented in designing a 30 MW thermal power plant. In the case study, the IECP tool has been set up in Aspen HYSYS process simulator to carry out the analysis, evaluation and screening of design alternatives. The application of this approach has developed an efficient, cost effective and environmentally friendly thermal system design with an overall thermal efficiency of 70% and CO{sub 2} and NO emissions of 0.28 kg/kW h and 0.2 g/kW h respectively. The cost of power generation is estimated as 4 cents kWh. These achievements are significant compared to the conventional thermal power plant, which demonstrates the potential of the SusDesign approach for the sustainable development of process systems.

  4. SusDesign - An approach for a sustainable process system design and its application to a thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Hossain, Khandoker Abul [Faculty of Engineering and Applied Science Memorial University of Newfoundland, St. John' s, NL, A1B 3X5 (Canada); Khan, Faisal [Faculty of Engineering and Applied Science Memorial University of Newfoundland, St. John' s, NL, A1B 3X5 (Canada); Hawboldt, Kelly [Faculty of Engineering and Applied Science Memorial University of Newfoundland, St. John' s, NL, A1B 3X5 (Canada)

    2010-10-15

    This paper presents a structured process design approach, SusDesign, for the sustainable development of process systems. At each level of process design, design alternatives are generated using a number of thermodynamic tools and applying pollution prevention strategies followed by analysis, evaluation and screening processes for the selection of potential design options. The evaluation and optimization are carried out based on an integrated environmental and cost potential (IECP) index, which has been estimated with the IECP tool. The present paper also describes a flowsheet optimization technique developed using different thermodynamic tools such as exergy/energy analysis, heat and mass integration, and cogeneration/trigeneration in a systematic manner. The proposed SusDesign approach has been successfully implemented in designing a 30 MW thermal power plant. In the case study, the IECP tool has been set up in Aspen HYSYS process simulator to carry out the analysis, evaluation and screening of design alternatives. The application of this approach has developed an efficient, cost effective and environmentally friendly thermal system design with an overall thermal efficiency of 70% and CO{sub 2} and NO emissions of 0.28 kg/kW h and 0.2 g/kW h respectively. The cost of power generation is estimated as 4 cents /kW h. These achievements are significant compared to the conventional thermal power plant, which demonstrates the potential of the SusDesign approach for the sustainable development of process systems.

  5. SusDesign - An approach for a sustainable process system design and its application to a thermal power plant

    International Nuclear Information System (INIS)

    Hossain, Khandoker Abul; Khan, Faisal; Hawboldt, Kelly

    2010-01-01

    This paper presents a structured process design approach, SusDesign, for the sustainable development of process systems. At each level of process design, design alternatives are generated using a number of thermodynamic tools and applying pollution prevention strategies followed by analysis, evaluation and screening processes for the selection of potential design options. The evaluation and optimization are carried out based on an integrated environmental and cost potential (IECP) index, which has been estimated with the IECP tool. The present paper also describes a flowsheet optimization technique developed using different thermodynamic tools such as exergy/energy analysis, heat and mass integration, and cogeneration/trigeneration in a systematic manner. The proposed SusDesign approach has been successfully implemented in designing a 30 MW thermal power plant. In the case study, the IECP tool has been set up in Aspen HYSYS process simulator to carry out the analysis, evaluation and screening of design alternatives. The application of this approach has developed an efficient, cost effective and environmentally friendly thermal system design with an overall thermal efficiency of 70% and CO 2 and NO emissions of 0.28 kg/kW h and 0.2 g/kW h respectively. The cost of power generation is estimated as 4 cents /kW h. These achievements are significant compared to the conventional thermal power plant, which demonstrates the potential of the SusDesign approach for the sustainable development of process systems.

  6. A Combined Approach for Component-based Software Design

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis; Quartel, Dick; Baldoni, R.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called software components. Several approaches addressing component-based development have been proposed recently. Most of these

  7. Parejas viables que perduran en el tiempo

    Directory of Open Access Journals (Sweden)

    Juan José Cuervo Rodríguez

    2013-01-01

    Full Text Available El presente artículo científico presenta resultados del proceso llevado a cabo en el proyecto de investigación docente "Mecanismos de autorregulación en parejas viables que perduran en el tiempo". Se soporta en una mirada compleja de la psicología basada en una epistemología de la construcción. En el ámbito metodológico, se inscribe en los estudios de terapia familiar desde una perspectiva de la comunicación humana como un todo integrado. Participaron nueve parejas. Los criterios de inclusión fueron: cinco o más años de convivencia, participación voluntaria, no presentar (ni haber presentado problemáticas especiales que ameriten intervención psicoterapéutica y la obtención de un porcentaje significativo en el uso de estrategias de comunicación asertiva en la resolución de conflictos. El método general utilizado fue el análisis de la comunicación en tarea de conversación. Los principales hallazgos señalan una estrecha relación entre el contexto de desarrollo de las parejas, la emergencia de códigos comunicacionales propios y la posibilidad de perdurar en el tiempo; también, se resalta el tipo de comunicación asertiva o constructiva, la construcción de valores como el respeto y la aceptación de las diferencias, y el deseo por vivir y construir bienestar común, como elementos constitutivos de su identidad como pareja.

  8. Dissolvable tattoo sensors: from science fiction to a viable technology

    Science.gov (United States)

    Cheng, Huanyu; Yi, Ning

    2017-01-01

    Early surrealistic painting and science fiction movies have envisioned dissolvable tattoo electronic devices. In this paper, we will review the recent advances that transform that vision into a viable technology, with extended capabilities even beyond the early vision. Specifically, we focus on the discussion of a stretchable design for tattoo sensors and degradable materials for dissolvable sensors, in the form of inorganic devices with a performance comparable to modern electronics. Integration of these two technologies as well as the future developments of bio-integrated devices is also discussed. Many of the appealing ideas behind developments of these devices are drawn from nature and especially biological systems. Thus, bio-inspiration is believed to continue playing a key role in future devices for bio-integration and beyond.

  9. Dissolvable tattoo sensors: from science fiction to a viable technology

    International Nuclear Information System (INIS)

    Cheng, Huanyu; Yi, Ning

    2017-01-01

    Early surrealistic painting and science fiction movies have envisioned dissolvable tattoo electronic devices. In this paper, we will review the recent advances that transform that vision into a viable technology, with extended capabilities even beyond the early vision. Specifically, we focus on the discussion of a stretchable design for tattoo sensors and degradable materials for dissolvable sensors, in the form of inorganic devices with a performance comparable to modern electronics. Integration of these two technologies as well as the future developments of bio-integrated devices is also discussed. Many of the appealing ideas behind developments of these devices are drawn from nature and especially biological systems. Thus, bio-inspiration is believed to continue playing a key role in future devices for bio-integration and beyond. (invited comment)

  10. Robust synthetic biology design: stochastic game theory approach.

    Science.gov (United States)

    Chen, Bor-Sen; Chang, Chia-Hung; Lee, Hsiao-Ching

    2009-07-15

    Synthetic biology is to engineer artificial biological systems to investigate natural biological phenomena and for a variety of applications. However, the development of synthetic gene networks is still difficult and most newly created gene networks are non-functioning due to uncertain initial conditions and disturbances of extra-cellular environments on the host cell. At present, how to design a robust synthetic gene network to work properly under these uncertain factors is the most important topic of synthetic biology. A robust regulation design is proposed for a stochastic synthetic gene network to achieve the prescribed steady states under these uncertain factors from the minimax regulation perspective. This minimax regulation design problem can be transformed to an equivalent stochastic game problem. Since it is not easy to solve the robust regulation design problem of synthetic gene networks by non-linear stochastic game method directly, the Takagi-Sugeno (T-S) fuzzy model is proposed to approximate the non-linear synthetic gene network via the linear matrix inequality (LMI) technique through the Robust Control Toolbox in Matlab. Finally, an in silico example is given to illustrate the design procedure and to confirm the efficiency and efficacy of the proposed robust gene design method. http://www.ee.nthu.edu.tw/bschen/SyntheticBioDesign_supplement.pdf.

  11. Separation of viable and non-viable tomato (Solanum lycopersicum L.) seeds using single seed near-infrared spectroscopy

    DEFF Research Database (Denmark)

    Shrestha, Santosh; Deleuran, Lise Christina; Gislum, René

    2017-01-01

    Single seed near-infrared (NIR) spectroscopy is a non-destructive technology commonly used for predicting lipids, proteins, carbohydrates and water content of agricultural products. The aim of the current study is to investigate the prospects of NIR spectroscopy in classifying viable and non...... identified as important for classification of viable and non-viable tomato seeds by iPLS-DA. The sensitivity i.e. ability to correctly identify the positive samples and specificity i.e. ability to reject the negative samples of the (iPLS-DA) model on identified spectral regions for prediction of viable......-viable tomato seeds of two cultivars using chemometrics. The data exploration were performed by principal component analysis (PCA). Subsequently, viable and non-viable seeds were classified by partial least squares-discriminant analysis (PLS-DA) and interval PLS-DA (iPLS-DA). The indication of clustering...

  12. Rational design of single-molecule magnets: a supramolecular approach.

    Science.gov (United States)

    Glaser, Thorsten

    2011-01-07

    Since the discovery that Mn(12)OAc acts as a single-molecule magnet (SMM), an increasing number of transition metal complexes have been demonstrated to behave as SMMs. The signature of a SMM is a slow relaxation of the magnetization at low temperatures accompanied by a magnetic hysteresis. The origin of SMM behaviour is the existence of an appreciable thermal barrier U for spin-reversal called magnetic anisotropy barrier which is related to the combination of a large total spin ground state (S(t)) and an easy-axis magnetic anisotropy. The extensive research on Mn(12)OAc and other SMMs has established more prerequisites for a rational development of new SMMs besides the high-spin ground state and the magnetic anisotropy: the symmetry should be at least C(3) to minimize the quantum tunneling of the magnetization through the anisotropy barrier but lower than cubic to avoid the cancellation of the local anisotropies upon projection onto the spin ground state. Based on these prerequisites, we have designed the ligand triplesalen which combines the phloroglucinol bridging unit for high spin ground states by the spin-polarization mechanism with a salen-like ligand environment for single-site magnetic anisotropies by a strong tetragonal ligand field. The C(3) symmetric, trinuclear complexes of the triplesalen ligand (talen(t-Bu(2)))(6-) exhibit a strong ligand folding resulting in an overall bowl-shaped molecular structure. This ligand folding preorganizes the axial coordination sites of the metal salen subunits for the complementary binding of three facial nitrogen atoms of a hexacyanometallate unit. This leads to a high driving force for the formation of heptanuclear complexes [M(t)(6)M(c)](n+) by the assembly of three molecular building blocks. Attractive van der Waals interactions of the tert-butyl phenyl units of two triplesalen trinuclear building blocks increase the driving force. In this respect, we have been able to synthesize the isostructural series [Mn(III)(6

  13. Designing Wearable Personal Assistants for Surgeons: An Egocentric Approach

    DEFF Research Database (Denmark)

    Jalaliniya, Shahram; Pederson, Thomas

    2015-01-01

    The design of general-purpose wearable computers demands particular care for how human perception, cognition, and action work and work together. The authors propose a human body-and-mind centric (egocentric as opposed to device-centric) design framework and present initial findings from deploying...... it in the design of a wearable personal assistant (WPA) for orthopedic surgeons. The result is a Google Glass-based prototype system aimed at facilitating touchless interaction with x-ray images, browsing of electronic patient records (EPR) when on the move, and synchronized ad hoc remote collaboration...

  14. Cognitive System Engineering Approach to Design of Work Support Systems

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1995-01-01

    The problem of designing work support systems for flexible, dynamic work environments is discussed and a framework for analysis of work in terms of behavior shaping constraints is described. The application of 'ecological interfaces' presenting to the user a map of the relational structure...... of the work space is advocated from the thesis that a map is a better guidance of discretionary tasks than is a route instruction. For the same reason, support of system design is proposed in terms of maps of the design territory, rather than in terms of guidelines....

  15. Spatiotemporal Dynamics of Total Viable Vibrio spp. in a NW Mediterranean Coastal Area.

    Science.gov (United States)

    Girard, Léa; Peuchet, Sébastien; Servais, Pierre; Henry, Annabelle; Charni-Ben-Tabassi, Nadine; Baudart, Julia

    2017-09-27

    A cellular approach combining Direct Viable Counting and Fluorescent In Situ Hybridization using a one-step multiple-probe technique and Solid Phase Cytometry (DVC-FISH-SPC) was developed to monitor total viable vibrios and cover the detection of a large diversity of vibrios. FISH combined three probes in the same assay and targeted sequences located at different positions on the 16S rRNA of Vibrio and Aliivibrio members. We performed a 10-month in situ study to investigate the weekly dynamics of viable vibrios relative to culturable counts at two northwestern Mediterranean coastal sites, and identified the key physicochemical factors for their occurrence in water using a multivariate analysis. Total viable and culturable cell counts showed the same temporal pattern during the warmer season, whereas the ratios between both methods were inverted during the colder seasons (<15°C), indicating that some of the vibrio community had entered into a viable but non-culturable (VBNC) state. We confirmed that Seawater Surface Temperature explained 51-62% of the total variance in culturable counts, and also showed that the occurrence of viable vibrios is controlled by two variables, pheopigment (15%) and phosphate (12%) concentrations, suggesting that other unidentified factors play a role in maintaining viability.

  16. Design and analysis approach for linear aerospike nozzle

    International Nuclear Information System (INIS)

    Khan, S.U.; Khan, A.A.; Munir, A.

    2014-01-01

    The paper presents an aerodynamic design of a simplified linear aerospike nozzle and its detailed exhaust flow analysis with no spike truncation. Analytical method with isentropic planar flow was used to generate the nozzle contour through MATLAB . The developed code produces a number of outputs comprising nozzle wall profile, flow properties along the nozzle wall, thrust coefficient, thrust, as well as amount of nozzle truncation. Results acquired from design code and numerical analyses are compared for observing differences. The numerical analysis adopted an inviscid model carried out through commercially available and reliable computational fluid dynamics (CFD) software. Use of the developed code would assist the readers to perform quick analysis of different aerodynamic design parameters for the aerospike nozzle that has tremendous scope of application in future launch vehicles. Keyword: Rocket propulsion, Aerospike Nozzle, Control Design, Computational Fluid Dynamics. (author)

  17. BEYOND GREEN BUILDINGS: AN INTEGRATED HOLISTIC DESIGN APPROACH

    Science.gov (United States)

    Technical Challenge: The Urban Sustainable Infrastructure Engineering Program (USIEP) at the University of Colorado at Denver is designing a Sustainable Youth Zone (SYZ) building in a disadvantaged community in Commerce City, CO. The SYZ utilizes a holistic ...

  18. Process Flow Sheet Generation & Design through a Group Contribution Approach

    DEFF Research Database (Denmark)

    d'Anterroches, Loïc

    2006-01-01

    Denne afhandling beskriver udviklingen af et framework til opstilling og design af proces flowsheet ved hjælp af en systematisk strategi for Computer Aided Flowsheet Design (CAFD). Det udviklede framework omfatter formulering, løsning og analyse af CAFD problemer baseret på et koncept med...... forbindelsesregler samt deres bidrag til specifikke flowsheet egenskaber på samme måde som kemiske molekyler bliver syntetiseret og testet for deres egenskaber. Hertil er simple og effektive metoder til processyntese og design blevet udviklet. Alternative flowsheet for kemiske processer opstilles baglæns ved...... at kombinere procesgrupper således at der dannes flowsheet strukturer som har de ønskede egenskaber. Derefter udvælges de mest lovende flowsheetalternativer til design hvorved de enkelte enhedsoperationer beregnes baglæns udfra specifikationerne for deres ind- og udgangsstrømme svarende til procesgruppernes...

  19. Design health village with the approach of sustainable architecture ...

    African Journals Online (AJOL)

    Journal Home > Vol 8, No 3 (2016) > ... a natural environment and away from the pollution of urban life , traditional medical care, hydrotherapy, sports and ... Keywords: Health; city health; smart; sustainability in architecture; architectural design ...

  20. A novel approach to beam optics design for particle accelerators

    International Nuclear Information System (INIS)

    Szilagyi, M.

    1981-01-01

    A new computational method is proposed for optimal design of beam lines. The method is based on a dynamic-programming recursive algorithm that minimizes an additively or multiplicatively expressed function of the desired parameters. (author)

  1. Regular cell design approach considering lithography-induced process variations

    OpenAIRE

    Gómez Fernández, Sergio

    2014-01-01

    The deployment delays for EUVL, forces IC design to continue using 193nm wavelength lithography with innovative and costly techniques in order to faithfully print sub-wavelength features and combat lithography induced process variations. The effect of the lithography gap in current and upcoming technologies is to cause severe distortions due to optical diffraction in the printed patterns and thus degrading manufacturing yield. Therefore, a paradigm shift in layout design is mandatory towards ...

  2. Producing design objects from regular polyhedra: A Pratical approach

    OpenAIRE

    Polimeni, Beniamino

    2017-01-01

    In the last few years, digital modeling techniques have played a major role in Architecture and design, influencing, at the same time, the creative process and the way the objects are fabricated. This revolution has produced a new fertile generation of architects and designers focused on the expanding possibilities of material and formal production reinforcing the idea of architecture as an interaction between art and artisanship. This innovative perspective inspires this paper, w...

  3. A Danish Socio-Cultural Approach To Lighting Design

    DEFF Research Database (Denmark)

    Stidsen, Lone Mandrup; Kirkegaard, Poul Henning

    2013-01-01

    The design of new Danish hospitals is of great interest as the government is investing approximately DKK 40 billion o n creating 'super hospitals'. The architectural quality is under discussion and the goal is to incorporate evidence based knowledge to secure the users wellbeing and optimum recov...... recovery in the healthcare environment as a requirement. Building design is challenged by many disciplines and compromises are being made in order to create best practice for healthcare architecture....

  4. A Learning Organization approach for Knowledge Management at Jupiter Design.

    OpenAIRE

    Jones, Timothy John

    2006-01-01

    This report has been carried out by a student studying for the degree of a Masters in Business Administration at Nottingham University Business School. The focus of the report is to suggest a knowledge management framework for the client Jupiter Design Limited. Jupiter has experienced considerable success and growth over recent years, evolving from a relatively small but well respected design agency into one of the largest agencies operating outside of London. Due to an expanding clie...

  5. Systems Engineering Approach for Conceptual Design of Frigate

    Science.gov (United States)

    2015-09-01

    NUMBER OF PAGES 109 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY CLASSIFICATION OF THIS PAGE Unclassified 19...a higher price . 47 VI. CONCLUSION AND RECOMMENDATIONS At times during designing naval ships, ship designers lose sight of the overall big...launch of 50 surface- skimming , anti- ship cruise missiles. The incoming missiles (RedFire) can be detected by a ship’s surveillance radar at a

  6. Creative approach in designing family hotels in Croatia

    OpenAIRE

    Rocco, Sanja; Šipić, Neven

    2013-01-01

    Hotel industry is becoming a leading segment of tourism in Croatia, evident from the constant increase in accommodation capacities, number of overnights, and employees in the hotel industry. To succeed, hotel managers need to identify the needs of their clients and find creative ways to please them. Hence, the future of small family-owned hotels is likely in differentiation by design. It implies a wide spectre of areas of applicability. The design is implemented in marketing strategy in the p...

  7. Ten ways to design for disgust, sadness, and other enjoyments: A design approach to enrich product experiences with negative emotions

    OpenAIRE

    Fokkinga, S.F.; Desmet, P.M.A.

    2013-01-01

    This paper demonstrates how designers can enrich user experiences by purposefully involving negative emotions in user-product interaction. This approach is derived from a framework of rich experience, which explains how and under what circumstances negative emotions make a product experience richer and enjoyable. The approach consists of three steps, where the designer decides 1) which negative emotion is most appropriate for the user context; 2) how and when this emotion is best elicited; an...

  8. Issues associated with a total systems approach to designing dependable systems

    International Nuclear Information System (INIS)

    Chisholm, G.H.

    1995-01-01

    A total system approach, developed by the nuclear-reactor-safety community, is extrapolated to the design of complex, critical systems. The essential properties of these systems are described, and a generic paradigm for subsequent designs is proposed

  9. Moving Aerospace Structural Design Practice to a Load and Resistance Factor Approach

    Science.gov (United States)

    Larsen, Curtis E.; Raju, Ivatury S.

    2016-01-01

    Aerospace structures are traditionally designed using the factor of safety (FOS) approach. The limit load on the structure is determined and the structure is then designed for FOS times the limit load - the ultimate load. Probabilistic approaches utilize distributions for loads and strengths. Failures are predicted to occur in the region of intersection of the two distributions. The load and resistance factor design (LRFD) approach judiciously combines these two approaches by intensive calibration studies on loads and strength to result in structures that are efficient and reliable. This paper discusses these three approaches.

  10. A Modal Approach to Compact MIMO Antenna Design

    Science.gov (United States)

    Yang, Binbin

    MIMO (Multiple-Input Multiple-Output) technology offers new possibilities for wireless communication through transmission over multiple spatial channels, and enables linear increases in spectral efficiency as the number of the transmitting and receiving antennas increases. However, the physical implementation of such systems in compact devices encounters many physical constraints mainly from the design of multi-antennas. First, an antenna's bandwidth decreases dramatically as its electrical size reduces, a fact known as antenna Q limit; secondly, multiple antennas closely spaced tend to couple with each other, undermining MIMO performance. Though different MIMO antenna designs have been proposed in the literature, there is still a lack of a systematic design methodology and knowledge of performance limits. In this dissertation, we employ characteristic mode theory (CMT) as a powerful tool for MIMO antenna analysis and design. CMT allows us to examine each physical mode of the antenna aperture, and to access its many physical parameters without even exciting the antenna. For the first time, we propose efficient circuit models for MIMO antennas of arbitrary geometry using this modal decomposition technique. Those circuit models demonstrate the powerful physical insight of CMT for MIMO antenna modeling, and simplify MIMO antenna design problem to just the design of specific antenna structural modes and a modal feed network, making possible the separate design of antenna aperture and feeds. We therefore develop a feed-independent shape synthesis technique for optimization of broadband multi-mode apertures. Combining the shape synthesis and circuit modeling techniques for MIMO antennas, we propose a shape-first feed-next design methodology for MIMO antennas, and designed and fabricated two planar MIMO antennas, each occupying an aperture much smaller than the regular size of lambda/2 x lambda/2. Facilitated by the newly developed source formulation for antenna stored

  11. Rural eHealth nutrition education for limited-income families: an iterative and user-centered design approach.

    Science.gov (United States)

    Atkinson, Nancy L; Saperstein, Sandra L; Desmond, Sharon M; Gold, Robert S; Billing, Amy S; Tian, Jing

    2009-06-22

    Adult women living in rural areas have high rates of obesity. Although rural populations have been deemed hard to reach, Internet-based programming is becoming a viable strategy as rural Internet access increases. However, when people are able to get online, they may not find information designed for them and their needs, especially harder to reach populations. This results in a "content gap" for many users. User-centered design is a methodology that can be used to create appropriate online materials. This research was conducted to apply a user-centered approach to the design and development of a health promotion website for low-income mothers living in rural Maryland. Three iterative rounds of concept testing were conducted to (1) identify the name and content needs of the site and assess concerns about registering on a health-related website; (2) determine the tone and look of the website and confirm content and functionality; and (3) determine usability and acceptability. The first two rounds involved focus group and small group discussions, and the third round involved usability testing with individual women as they used the prototype system. The formative research revealed that women with limited incomes were enthusiastic about a website providing nutrition and physical activity information targeted to their incomes and tailored to their personal goals and needs. Other priority content areas identified were budgeting, local resources and information, and content that could be used with their children. Women were able to use the prototype system effectively. This research demonstrated that user-centered design strategies can help close the "content gap" for at-risk audiences.

  12. Design approaches and parameters for magnetically levitated transport systems

    International Nuclear Information System (INIS)

    Danby, G.T.; Powell, J.R.

    1988-01-01

    Mechanically levitated transport system approaches are assessed with regard to thrust power needs, track cost, suspension stability, and safety. The null flux suspension appears as the favored approach, having the least thrust power requirements, highest stability, and lowest amount of track material. Various null flux configurations are described, together with operating parameters. The Linear Synchronous Motor (LSM) propulsion system is also described for propelling the suspended vehicles. Cryogenics and superconductivity aspects are discussed and the effect of high T/sub c/ superconductors evaluated

  13. A Course on Serious Game Design and Development Using an Online Problem-Based Learning Approach

    Science.gov (United States)

    Kapralos, Bill; Fisher, Stephanie; Clarkson, Jessica; van Oostveen, Roland

    2015-01-01

    Purpose: The purpose of this paper is to describe a novel undergraduate course on serious game design and development that integrates both game and instructional design, thus providing an effective approach to teaching serious game design and development. Very little effort has been dedicated to the teaching of proper serious game design and…

  14. Integrated design approach of the pebble bed modular using models

    International Nuclear Information System (INIS)

    Venter, P.J.

    2005-01-01

    The Pebble Bed Modular Reactor (PBMR) is the first pebble bed reactor that will be utilised in a high temperature direct Brayton cycle configuration. This implies that there are a number of unique features in the PBMR that extend from the German experience base. One of the challenges in the design of the PBMR is managing the integrated design process between the designers, the physicists and the analysts. This integrated design process is managed through model-based development work. Three-dimensional CAD models are constructed of the components and parts in the reactor. From the CAD models, CFD models, neutronic models, shielding models, FEM models and other thermodynamic models are derived. These models range from very simple models to extremely detailed and complex models. The models are used in legacy software as well as commercial off-the-shelf software. The different models are also used in code-to-code comparisons to verify the results. This paper will briefly discuss the different models and the interaction between the models, showing the iterative design process that is used in the development of the reactor at PBMR. (author)

  15. DESIGN ANALYSIS OF ELECTRICAL MACHINES THROUGH INTEGRATED NUMERICAL APPROACH

    Directory of Open Access Journals (Sweden)

    ARAVIND C.V.

    2016-02-01

    Full Text Available An integrated design platform for the newer type of machines is presented in this work. The machine parameters are evaluated out using developed modelling tool. With the machine parameters, the machine is modelled using computer aided tool. The designed machine is brought to simulation tool to perform electromagnetic and electromechanical analysis. In the simulation, conditions setting are performed to setup the materials, meshes, rotational speed and the excitation circuit. Electromagnetic analysis is carried out to predict the behavior of the machine based on the movement of flux in the machines. Besides, electromechanical analysis is carried out to analyse the speed-torque characteristic, the current-torque characteristic and the phase angle-torque characteristic. After all the results are analysed, the designed machine is used to generate S block function that is compatible with MATLAB/SIMULINK tool for the dynamic operational characteristics. This allows the integration of existing drive system into the new machines designed in the modelling tool. An example of the machine design is presented to validate the usage of such a tool.

  16. Toward a transdisciplinary approach of ergonomic design for sustainability.

    Science.gov (United States)

    Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

    2012-01-01

    Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

  17. Modern linear control design a time-domain approach

    CERN Document Server

    Caravani, Paolo

    2013-01-01

    This book offers a compact introduction to modern linear control design.  The simplified overview presented of linear time-domain methodology paves the road for the study of more advanced non-linear techniques. Only rudimentary knowledge of linear systems theory is assumed - no use of Laplace transforms or frequency design tools is required. Emphasis is placed on assumptions and logical implications, rather than abstract completeness; on interpretation and physical meaning, rather than theoretical formalism; on results and solutions, rather than derivation or solvability.  The topics covered include transient performance and stabilization via state or output feedback; disturbance attenuation and robust control; regional eigenvalue assignment and constraints on input or output variables; asymptotic regulation and disturbance rejection. Lyapunov theory and Linear Matrix Inequalities (LMI) are discussed as key design methods. All methods are demonstrated with MATLAB to promote practical use and comprehension. ...

  18. A CNN Based Approach for Garments Texture Design Classification

    Directory of Open Access Journals (Sweden)

    S.M. Sofiqul Islam

    2017-05-01

    Full Text Available Identifying garments texture design automatically for recommending the fashion trends is important nowadays because of the rapid growth of online shopping. By learning the properties of images efficiently, a machine can give better accuracy of classification. Several Hand-Engineered feature coding exists for identifying garments design classes. Recently, Deep Convolutional Neural Networks (CNNs have shown better performances for different object recognition. Deep CNN uses multiple levels of representation and abstraction that helps a machine to understand the types of data more accurately. In this paper, a CNN model for identifying garments design classes has been proposed. Experimental results on two different datasets show better results than existing two well-known CNN models (AlexNet and VGGNet and some state-of-the-art Hand-Engineered feature extraction methods.

  19. An automated approach to the design of decision tree classifiers

    Science.gov (United States)

    Argentiero, P.; Chin, R.; Beaudet, P.

    1982-01-01

    An automated technique is presented for designing effective decision tree classifiers predicated only on a priori class statistics. The procedure relies on linear feature extractions and Bayes table look-up decision rules. Associated error matrices are computed and utilized to provide an optimal design of the decision tree at each so-called 'node'. A by-product of this procedure is a simple algorithm for computing the global probability of correct classification assuming the statistical independence of the decision rules. Attention is given to a more precise definition of decision tree classification, the mathematical details on the technique for automated decision tree design, and an example of a simple application of the procedure using class statistics acquired from an actual Landsat scene.

  20. Entropy Minimization Design Approach of Supersonic Internal Passages

    Directory of Open Access Journals (Sweden)

    Jorge Sousa

    2015-08-01

    Full Text Available Fluid machinery operating in the supersonic regime unveil avenues towards more compact technology. However, internal supersonic flows are associated with high aerodynamic and thermal penalties, which usually prevent their practical implementation. Indeed, both shock losses and the limited operational range represent particular challenges to aerodynamic designers that should be taken into account at the initial phase of the design process. This paper presents a design methodology for supersonic passages based on direct evaluations of the velocity field using the method of characteristics and computation of entropy generation across shock waves. This meshless function evaluation tool is then coupled to an optimization scheme, based on evolutionary algorithms that minimize the entropy generation across the supersonic passage. Finally, we assessed the results with 3D Reynolds Averaged Navier Stokes calculations.

  1. Computer aided fixture design - A case based approach

    Science.gov (United States)

    Tanji, Shekhar; Raiker, Saiesh; Mathew, Arun Tom

    2017-11-01

    Automated fixture design plays important role in process planning and integration of CAD and CAM. An automated fixture setup design system is developed where when fixturing surfaces and points are described allowing modular fixture components to get automatically select for generating fixture units and placed into position with satisfying assembled conditions. In past, various knowledge based system have been developed to implement CAFD in practice. In this paper, to obtain an acceptable automated machining fixture design, a case-based reasoning method with developed retrieval system is proposed. Visual Basic (VB) programming language is used in integrating with SolidWorks API (Application programming interface) module for better retrieval procedure reducing computational time. These properties are incorporated in numerical simulation to determine the best fit for practical use.

  2. Task Analysis: A Systematic Approach to Designing New Careers Programs.

    Science.gov (United States)

    Jackson, Vivian C.

    This guide presents the primary approaches, tools, and techniques utilized by the New Careers Training Laboratory (NCTL) staff to provide skills in training and to conduct agency task analyses. Much of the technical information has been taken from an earlier NCTL publication by Tita Beal, "A New Careers Guide for Career Development…

  3. Applied approach slab settlement research, design/construction : final report.

    Science.gov (United States)

    2013-08-01

    Approach embankment settlement is a pervasive problem in Oklahoma and many other states. The bump and/or abrupt slope change poses a danger to traffic and can cause increased dynamic loads on the bridge. Frequent and costly maintenance may be needed ...

  4. Designing renewable energy systems a life cycle assessment approach

    CERN Document Server

    Gerber, Leda

    2014-01-01

    The book discusses a multi-objective optimization approach in LCA that allows the flexible construction of comprehensive Pareto fronts to help understand the weightings and relative importance of its elements. The methodology is applied to the pertinent topics of thermochemical wood conversion, deep geothermal energy, and regional energy planning.

  5. A hybrid approach to designing inbound-resupply strategies

    NARCIS (Netherlands)

    Dullaert, Wout; Vernimmen, Bert; Raa, Birger; Witlox, Frank

    A new hybrid approach was developed to determine the optimal inbound-resupply strategy when suppliers ship goods to receivers. The optimal reorder level was calculated on the basis of a simulation of the distribution of demand and the lead time of the various sourcing alternatives. An evolutionary

  6. Systems approaches for the design of sustainable agro-ecosystems

    NARCIS (Netherlands)

    Kropff, M.J.; Bouma, J.; Jones, J.W.

    2001-01-01

    The complexity of agricultural systems and the need to fulfil multiple objectives in sustainable agro-ecosystems call for interdisciplinary analyzes and input from a wide variety of disciplines in order to better understand the complete agronomic production system. Systems approaches have been

  7. Design of multimodal transport networks : A hierarchical approach

    NARCIS (Netherlands)

    Van Nes, R.

    2002-01-01

    Multimodal transport, that is using two or more transport modes for a trip between which a transfer is necessary, seems an interesting approach to solving today's transportation problems with respect to the deteriorating accessibility of city centres, recurrent congestion, and environmental impact.

  8. Exploring Advertising and Product Design Sexual Implications: A Sociocultural Approach

    Directory of Open Access Journals (Sweden)

    Johannis Tsoumas

    2016-07-01

    Full Text Available This paper explores design thought and application on various fields of its domain, under the prism of the human sexuality. However the two main areas of our concern are the fields of advertising and product design which, according to the author, represent the most significant parts on which the concept of human sexuality is thoroughly applied and still remains effective. Designing under this instinctive human value, one can easily trace the importance of concepts such as charm and pleasure, which can overlap and possibly ‘beat to death’ the concepts of usability and quality of use, in many ways. The starting point of this allegory in handling and promoting new products, most of which are not directly connected with the sense of sexuality, are the advertisements. On the other hand, one will be able to find out the myth of gender and its contradictions in a certain group of products which have direct sexuality references and most of them are designed for a limited, however faithful and increasingly concerned consumer group. Thirdly, the author aims to focus on the ‘discovery’ of socially marginalized consumer groups, such as the homosexual community, by some inventive entrepreneurs and designers, for the formation of a ‘new market’ which seems to thrive in terms of profit. As this, meteoric rise, market is directly connected with analogous social changes globally, one will be able to understand its development, but also the exploitation of homosexual behaviour, via the ideological points of both sides: designers and consumers.

  9. Approach to novel design of CO2 based centrifugal compressor

    Directory of Open Access Journals (Sweden)

    Kura Tomasz

    2016-01-01

    Full Text Available Even though turbomachinery design issues have been investigated almost since the beginning of engineering, its optimization process is still important. With the development of refrigeration devices and ORC based distributed generation facilities, a need for efficient and low-energy compressors and turbines became even more demanding. Such machines working with typical fluid, like air, are well described, but there is a room regarding the fluids like CO2, vapour of organic fluids, etc. The main objective of present studies is to propose a numerical model of the centrifugal compressor, with CO2 as the working fluid. Such unit may be a part of refrigeration cycle. Commonly, the scroll or piston compressors are used in such cases, however some discussed disadvantages show that the novel designs should be looked for. Properly designed centrifugal compressors can have higher efficiency than the presently used. Three dimensional analyses of proposed geometries were conducted – using a model including heat, mass and momentum conservation laws as well as ideal gas law. Verification of the proposed mesh and results was performed in the basis of values obtained using theoretical and empirical equations. With about 700 000 control volumes in the validated model, error of the results was no higher than 5%, with only about 1% in regards to the thermal parameters. Two design proposals were analysed, with performance maps as the main comparison factor. Apart from performance characteristics, the pressure and velocity fields were presented, showing the process of flow structure optimization. The main goal was to reduce negative effects of pressure and velocity gradients on the performance. Proposed precursory design might be a good starting point for further development of compressors. The results of numerical analysis were promising and shows the possibility of proposed design usage in practical applications, however to obtain deep understanding of the

  10. MLED_BI: a new BI Design Approach to Support Multilingualism in Business Intelligence

    Directory of Open Access Journals (Sweden)

    Nedim Dedić

    2017-11-01

    Full Text Available Existing approaches to support Multilingualism (ML in Business Intelligence (BI create problems for business users, present a number of challenges from the technical perspective, and lead to issues with logical dependence in the star schema. In this paper, we propose MLED_BI (Multilingual Enabled Design for Business Intelligence, a novel BI design approach to support the application of ML in BI Environment, which overcomes the issues and problems found with existing approaches. The approach is based on a revision of the data warehouse dimensional modelling approach and treats the Star Schema as a higher level entity. This paper describes MLED_BI and the validation and evaluation approach used.

  11. A constraint-based approach to intelligent support of nuclear reactor design

    International Nuclear Information System (INIS)

    Furuta, Kazuo

    1993-01-01

    Constraint is a powerful representation to formulate and solve problems in design; a constraint-based approach to intelligent support of nuclear reactor design is proposed. We first discuss the features of the approach, and then present the architecture of a nuclear reactor design support system under development. In this design support system, the knowledge base contains constraints useful to structure the design space as object class definitions, and several types of constraint resolvers are provided as design support subsystems. The adopted method of constraint resolution are explained in detail. The usefulness of the approach is demonstrated using two design problems: Design window search and multiobjective optimization in nuclear reactor design. (orig./HP)

  12. Full‐factorial design space exploration approach for multi‐criteria decision making of the design of industrial halls

    NARCIS (Netherlands)

    Lee, B. (Bruno); Pourmousavian, N. (Navid); Hensen, J.L.M.

    2016-01-01

    Industrial halls pose high energy saving potential that is not yet explored under current design practice. Common design approaches such as parametric study or optimization are largely constrained by the assumptions and do not promote flexibility in the decision making process. Based on the unique

  13. Space Station Freedom - Approaching the critical design phase

    Science.gov (United States)

    Kohrs, Richard H.; Huckins, Earle, III

    1992-01-01

    The status and future developments of the Space Station Freedom are discussed. To date detailed design drawings are being produced to manufacture SSF hardware. A critical design review (CDR) for the man-tended capability configuration is planned to be performed in 1993 under the SSF program. The main objective of the CDR is to enable the program to make a full commitment to proceed to manufacture parts and assemblies. NASA recently signed a contract with the Russian space company, NPO Energia, to evaluate potential applications of various Russian space hardware for on-going NASA programs.

  14. 3D natural emulation design approach to virtual communities

    OpenAIRE

    DiPaola, Steve

    2010-01-01

    The design goal for OnLive’s Internet-based Virtual Community system was to develop avatars and virtual communities where the participants sense a tele-presence – that they are really there in the virtual space with other people. This collective sense of "being-there" does not happen over the phone or with teleconferencing; it is a new and emerging phenomenon, unique to 3D virtual communities. While this group presence paradigm is a simple idea, the design and technical issues needed to begin...

  15. Framing design research for service orientation through PSS approaches

    DEFF Research Database (Denmark)

    Sakao, Tomohiko; Sandström, Gunilla Ölundh; Matzen, Detlef

    2009-01-01

    on the literature analysis, the authors present three crucial dimensions for service oriented design research, i.e. an offer dimension representing products and services, a provider dimension, and a customer/user dimension. In addition, three research targets are proposed; PSS-offer modelling, PSS development......, and PSS potential. Furthermore, several promising future research directions are identified. These include evaluating economic consequences or environmental benefits, establishing terminology, organizational issues, and developing methods and tools to support designers. The boundaries to other research...... fields are getting blurry and many aspects of other professionalisms must be taken into account. Thus, there is especially need in future research to open towards other research areas....

  16. New approaches to glove box design at Hanford

    International Nuclear Information System (INIS)

    Lini, D.C.; Fisher, F.D.; Walters, F.F.

    1986-01-01

    Glove boxes provide the primary environmental containment system for plutonium processing operations at US Dept. of Energy (DOE)-owned facilities such as Rockwell Hanford. As noted in previous presentations, glove box designs and operations have evolved through stages that are a result of advances in processing techniques, new regulatory requirements, and cost escalation. These factors will continue to influence the current glove box designs and operations. The purpose of this presentation is to discuss required upgrades and changes that are being incorporated into glove boxes being installed at Rockwell Hanford and other DOE installations or are being evaluated for future upgrades

  17. Strengthening Agricultural Research Capacity for Viable Extension

    African Journals Online (AJOL)

    PROF. MADUKWE

    developing inter-subjective knowledge which could aid policy advocacy, design and implementation ... Hermeneutics defends the ontological claim that human beings are ..... various public spaces and genres are closely attended to by CDA.

  18. Sustainable flexible process innovation. Towards a new building design approach

    NARCIS (Netherlands)

    Brand, G.J.W. van den; Quanjel, E.; Zeiler, W.

    2001-01-01

    Developers and investors ofresidential and office buildings are facing large risks. A yearly loss ofcapital of approximately 50 billion EURO can be reduced by improvement of the design process. The need for more sustainable and end user oriented buildings on a background ofthe dynamics ofever

  19. Electronic system level design an open-source approach

    CERN Document Server

    Rigo, Sandro; Santos, Luiz

    2014-01-01

    This book devises ESL design from the pragmatic perspective of a SystemC-based representation by showing how to build and how to use ESL languages, models and tools. It includes TLM 2.0 and step-by-step examples; it also addresses power modeling.

  20. Pulse Detecting Genetic Circuit – A New Design Approach

    Science.gov (United States)

    Inniss, Mara; Iba, Hitoshi; Way, Jeffrey C.

    2016-01-01

    A robust cellular counter could enable synthetic biologists to design complex circuits with diverse behaviors. The existing synthetic-biological counters, responsive to the beginning of the pulse, are sensitive to the pulse duration. Here we present a pulse detecting circuit that responds only at the falling edge of a pulse–analogous to negative edge triggered electric circuits. As biological events do not follow precise timing, use of such a pulse detector would enable the design of robust asynchronous counters which can count the completion of events. This transcription-based pulse detecting circuit depends on the interaction of two co-expressed lambdoid phage-derived proteins: the first is unstable and inhibits the regulatory activity of the second, stable protein. At the end of the pulse the unstable inhibitor protein disappears from the cell and the second protein triggers the recording of the event completion. Using stochastic simulation we showed that the proposed design can detect the completion of the pulse irrespective to the pulse duration. In our simulation we also showed that fusing the pulse detector with a phage lambda memory element we can construct a counter which can be extended to count larger numbers. The proposed design principle is a new control mechanism for synthetic biology which can be integrated in different circuits for identifying the completion of an event. PMID:27907045

  1. Thermoplastic Composite Wind Turbine Blades : An Integrated Design Approach

    NARCIS (Netherlands)

    Joncas, S.

    2010-01-01

    This thesis proposes a new structural design concept for future large wind turbine blades based on fully recyclable thermoplastic composites (TPC). With respect to material properties, cost and processing, reactively processed anionic polyamide-6 (APA-6) has been identified as the most promising

  2. A structured approach to heat exchanger network retrofit design

    NARCIS (Netherlands)

    Van Reisen, J.L.B.

    2008-01-01

    Process plants have high energy consumption. Much energy can be saved by a proper design of the heat exchanger network, which contains the main heat transferring equipment of the plant. Existing plants can often be made more energy-efficient by a retrofit: the (physical) modification of the

  3. Design of experiment approach for the process optimization of ...

    African Journals Online (AJOL)

    Mulberry is considered as food-medicine herb, with specific nutritional and medicinal values. In this study, response surface methodology (RSM) was employed to optimize the ultrasonic-assisted extraction of total polysaccharide from mulberry using Box-Behnken design (BBD). Based on single factor experiments, a three ...

  4. The Integration of Interior Architecture Education with Digital Design Approaches

    Science.gov (United States)

    Yazicioglu, Deniz Ayse

    2011-01-01

    It is inevitable that as a result of progress in technology and the changes in the ways with which design is conceived, interior architecture schools should be updated according to these requirements and that new educational processes should be tried out. It is for this reason that the scope and aim of this study have been determined as being the…

  5. Design Ontology-Contrasting an empirical and a theoritical approach

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Storga, Mario

    2007-01-01

    This paper presents the result of the research that compares two previous and separate efforts of the authors to develop engineering design ontologies with a longer-term aim to produce a useable and theoretical sound ontology. The research methodology adopted was to examine each of the concepts a...

  6. Communicative Syllabus Design--The Topic and Task Approach.

    Science.gov (United States)

    Reynolds, Michael J.

    An English for Special Purposes (ESP) program, devised for students of the School of Environmental Design at the English Language Centre of King Abdul Aziz University, Jeddah, is described. The course is intended to be of direct relevance to students by developing their English language skills and giving them a basic professional vocabulary. A…

  7. Risk allocation approach to reactor safety design and evaluation

    International Nuclear Information System (INIS)

    Gokcek, O.; Temme, M.I.; Derby, S.L.

    1978-01-01

    This paper describes a risk allocation technique used for determining nuclear power plant design reliability requirements. The concept of risk allocation-optimum choice of safety function reliabilities under a maximum risk constraint - is described. An example of risk allocation is presented to demonstrate the application of the methodology

  8. Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

    International Nuclear Information System (INIS)

    1996-01-01

    The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs

  9. Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs.

  10. PMA-Linked Fluorescence for Rapid Detection of Viable Bacterial Endospores

    Science.gov (United States)

    LaDuc, Myron T.; Venkateswaran, Kasthuri; Mohapatra, Bidyut

    2012-01-01

    The most common approach for assessing the abundance of viable bacterial endospores is the culture-based plating method. However, culture-based approaches are heavily biased and oftentimes incompatible with upstream sample processing strategies, which make viable cells/spores uncultivable. This shortcoming highlights the need for rapid molecular diagnostic tools to assess more accurately the abundance of viable spacecraft-associated microbiota, perhaps most importantly bacterial endospores. Propidium monoazide (PMA) has received a great deal of attention due to its ability to differentiate live, viable bacterial cells from dead ones. PMA gains access to the DNA of dead cells through compromised membranes. Once inside the cell, it intercalates and eventually covalently bonds with the double-helix structures upon photoactivation with visible light. The covalently bound DNA is significantly altered, and unavailable to downstream molecular-based manipulations and analyses. Microbiological samples can be treated with appropriate concentrations of PMA and exposed to visible light prior to undergoing total genomic DNA extraction, resulting in an extract comprised solely of DNA arising from viable cells. This ability to extract DNA selectively from living cells is extremely powerful, and bears great relevance to many microbiological arenas.

  11. An ergonomic approach for designing indian traditional vegetable cutter.

    Science.gov (United States)

    Dhara, Prakash C; De, Sujaya; Sengupta, Piyali; Maity, Payel; Pal, Amitava

    2015-01-01

    In India varieties of hand tools have been used to cut the vegetables. Traditional vegetable cutter is a commonly used hand tool which has been used for years in the kitchen. The tool may have some design related problems. The present study was undertaken to reduce those problems. The study objective was to evaluate a new design of traditional vegetable cutters for use in the Indian kitchen. One hundred and fifty Indian women who regularly used a vegetable cutter for cooking purposes participated in this study. The design of the vegetable cutter was modified based on the postural preference of the users and other anthropometric factors including the blade angle, length, breadth and width of the sitting area. The prevalence of musculoskeletal disorders was assessed by means of a questionnaire for subjects' feedback. New concepts of the design were proposed and a few prototypes were made and were tested by paired comparison using the EMG system. A large number of subjects (61%) used the vegetable cutter while sitting on the floor with folded knees and the prevalence of MSD in most of the body parts was comparatively lower in this posture than that in squatting posture. In the new design, a broad platform was suggested to provide a more comfortable sitting when a subject sits on it with folded knees. For the vegetable cutter, the blade angle was made at 120° with a broad folded wooden base as the final prototype of the cutter. The length, breadth, and thickness of the base were selected based on the results of the anthropometric measurements among the prototypes of the cutters. The selected vegetable cutter showed the least myoelectric activity among the prototypes during cutting vegetables. The modified vegetable cutter appeared to be ergonomically effective, less prone to muscular stress, and compatible for preferred posture of the users.

  12. Design for deconstruction : emergy approach to evaluate deconstruction effectiveness

    OpenAIRE

    Amoêda, R.

    2010-01-01

    Tese de doutoramento em Arquitectura - Projecto e Tecnologias da Construção Recovery of materials is a crucial concern to avoid depletion of natural resources nowadays. Industrial Ecology recognised the role of industrial activities in order to minimise waste flows and to maximise materials and components recovery, by means of reuse and recycling. Construction industries, however, is slowly becoming aware of building materials recovery and at present new approaches are seriousl...

  13. The STEP standard as an approach for design and prototyping

    OpenAIRE

    Plantec , Alain; Ribaud , Vincent

    1998-01-01

    International audience; STEP is an ISO standard (ISO-10303) for the computer-interpretable representation and exchange of product data. Parts of STEP standardize conceptual structures and usage of information in generic or specific domains. The standardization process of these constructs is an evolutionary approach , which uses generated prototypes at different phases of the process. This paper presents a method for the building of prototype generators, inspired by this standardization proces...

  14. Operator Station Design System - A computer aided design approach to work station layout

    Science.gov (United States)

    Lewis, J. L.

    1979-01-01

    The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

  15. Constructive Synergy in Design Science Research: A Comparative Analysis of Design Science Research and the Constructive Research Approach

    DEFF Research Database (Denmark)

    Piirainen, Kalle; Gonzalez, Rafael A.

    2014-01-01

    Information systems research is focused on creating knowledge which can be applied in organizations. Design science research, which specifically aims at applying existing knowledge to solve interesting and relevant business problems, has been steadily gaining support in information systems research....... However, design science research is not the only design-oriented research framework available. Accordingly, this raises the question of whether there is something to learn between the different approaches. This paper contributes to answering this question by comparing design science research...... with the constructive research approach. The conclusion is that the two approaches are similar and compatible, save for details in practical requirements and partly underlying philosophical assumptions. The main finding that arises from the comparison is, however, that there is a potential problem in claiming knowledge...

  16. Constructive Synergy in Design Science Research: A Comparative Analysis of Design Science Research and the Constructive Research Approach

    DEFF Research Database (Denmark)

    Piirainen, Kalle; Gonzalez, Rafael A.

    2014-01-01

    with the constructive research approach. The conclusion is that the two approaches are similar and compatible, save for details in practical requirements and partly underlying philosophical assumptions. The main finding that arises from the comparison is, however, that there is a potential problem in claiming knowledge......Information systems research is focused on creating knowledge which can be applied in organizations. Design science research, which specifically aims at applying existing knowledge to solve interesting and relevant business problems, has been steadily gaining support in information systems research....... However, design science research is not the only design-oriented research framework available. Accordingly, this raises the question of whether there is something to learn between the different approaches. This paper contributes to answering this question by comparing design science research...

  17. Approach to design space from retrospective quality data.

    Science.gov (United States)

    Puñal Peces, Daniel; García-Montoya, Encarna; Manich, Albert; Suñé-Negre, Josep Maria; Pérez-Lozano, Pilar; Miñarro, Montse; Ticó, Josep Ramon

    2016-01-01

    Nowadays, the entire manufacturing process is based on the current GMPs, which emphasize the reproducibility of the process, and companies have a lot of recorded data about their processes. The establishment of the design space (DS) from retrospective data for a wet compression process. A design of experiments (DoE) with historical data from 4 years of industrial production has been carried out using the experimental factors as the results of the previous risk analysis and eight key parameters (quality specifications) that encompassed process and quality control data. Software Statgraphics 5.0 was applied, and data were processed to obtain eight DS as well as their safe and working ranges. Experience shows that it is possible to determine DS retrospectively, being the greatest difficulty in handling and processing of high amounts of data; however, the practicality of this study is very interesting as it let have the DS with minimal investment in experiments since actual production batch data are processed statistically.

  18. Fuel failure monitoring system design approach for KALIMER

    International Nuclear Information System (INIS)

    Song, Soon Ja; Hwang, I. K.; Kwon, Kee Choon

    1998-01-01

    Fuel Failure Monitoring System (FFMS) detects fission gas and locates failed fuels in Liquid Metal Reactor. This system comprises three subsystems; delayed neutron monitoring, cover gas monitoring, and gas tagging. The purpose of this system is to improve the integrity and availability of the liquid metal plant. In this paper, FFMS was analyzed on detection method and compared with various existing liquid metal plants. Sampling and detecting methods were classified with specific plant types. Several technologies of them was recognized and used in most liquid metal reactors. Detection technology and analysis performance, however, must be improved because of new technology when liquid metal plant is built, but the FFMS design scheme will not be changed. Thereby this paper suggests the design to implement KALIMER(Korea Advanced LIquid MEtal Reactor) FFMS

  19. Systems approach to design of power supply to mines

    Energy Technology Data Exchange (ETDEWEB)

    Shul' ga, Yu I; Voloshko, A V

    1986-09-01

    Optimization of power supplies to underground coal mines in the USSR is evaluated. Systems analysis of power systems is discussed. Power system of a coal mine is treated as an element of the branch power system which forms a subsystem of the local and national power system. Design of a system for computerized control of power supplies to underground coal mines is evaluated. Elements of the system, control equipment, types of information stored and processed by the system as well as economic efficiency of using computerized control for power supply in underground mining are discussed. Recommendations for computer-aided design of power systems and use of computerized control systems for power supply in underground coal mining in the USSR are made.

  20. A QFD and SERVQUAL Approach to Hotel Service Design

    OpenAIRE

    Ikiz, Aysun Kapucugil; Masoudi, Ali

    2014-01-01

    Current challenges facing the hotel service providers, such as “high customer demands on quality”, “increasing competition for high customer satisfaction” and “the demand for full services”, are directly related to better understand the attributes of hotel services and improve the service design characteristics accordingly. In service quality literature, SERVQUAL is the most widely used structure to measure customer expectations and perceptions. Quality Function Deployment (QFD) method is als...

  1. Field analysis: approach to the design of teleoperator workstation

    International Nuclear Information System (INIS)

    Saint-Jean, T.; Lescoat, D.A.

    1986-04-01

    Following a brief review of theoretical scope this paper will characterize a methodology to the design of teleoperation workstations. This methodology is illustrated by an example - field analysis of a telemanipulation task in a hot cell. Practical informations are given: operating strategy different from the written procedure, team work organization, different skills. Recommendations are suggested as regards the writing of procedures, the training of personnel and the work organisation

  2. Nuclear energy: the most viable alternative

    International Nuclear Information System (INIS)

    Guena, Ana Maria de Oliveira; Aquino, Afonso Rodrigues de

    2006-01-01

    In this article various forms of electric power generation considered clean are discussed. The paper approaches the nuclear, aeolian, solar and fuel cells, and a resume of the vantage and advantage of each one are discussed, emphasizing their impact on the environment

  3. VIMOS Instrument Control Software Design: an Object Oriented Approach

    Science.gov (United States)

    Brau-Nogué, Sylvie; Lucuix, Christian

    2002-12-01

    The Franco-Italian VIMOS instrument is a VIsible imaging Multi-Object Spectrograph with outstanding multiplex capabilities, allowing to take spectra of more than 800 objects simultaneously, or integral field spectroscopy mode in a 54x54 arcsec area. VIMOS is being installed at the Nasmyth focus of the third Unit Telescope of the European Southern Observatory Very Large Telescope (VLT) at Mount Paranal in Chile. This paper will describe the analysis, the design and the implementation of the VIMOS Instrument Control System, using UML notation. Our Control group followed an Object Oriented software process while keeping in mind the ESO VLT standard control concepts. At ESO VLT a complete software library is available. Rather than applying waterfall lifecycle, ICS project used iterative development, a lifecycle consisting of several iterations. Each iteration consisted in : capture and evaluate the requirements, visual modeling for analysis and design, implementation, test, and deployment. Depending of the project phases, iterations focused more or less on specific activity. The result is an object model (the design model), including use-case realizations. An implementation view and a deployment view complement this product. An extract of VIMOS ICS UML model will be presented and some implementation, integration and test issues will be discussed.

  4. A dynamic approach to real-time performance measurement in design projects

    DEFF Research Database (Denmark)

    Skec, Stanko; Cash, Philip; Storga, Mario

    2017-01-01

    Recent developments in engineering design management point to the need for more dynamic, fine-grain measurement approaches able to deal with multi-dimensional, cross-level process performance in product design. Thus, this paper proposes a new approach to the measurement and management of individu...

  5. Smart energy households' pilot projects in the Netherlands with a design-driven approach

    NARCIS (Netherlands)

    Geelen, D.V.; Scheepens, A.; Kobus, C.; Obinna, U.; Mugge, R.; Schoormans, J.; Reinders, Angelina H.M.E.

    2013-01-01

    Residential smart grid projects can be evaluated by a design-driven approach, which focuses on gaining insights for successful product and service development by taking the end-users as a starting point. Because only little experience exists with this design-driven approach, this paper addresses how

  6. An Optimisation Approach Applied to Design the Hydraulic Power Supply for a Forklift Truck

    DEFF Research Database (Denmark)

    Pedersen, Henrik Clemmensen; Andersen, Torben Ole; Hansen, Michael Rygaard

    2004-01-01

    -level optimisation approach, and is in the current paper exemplified through the design of the hydraulic power supply for a forklift truck. The paper first describes the prerequisites for the method and then explains the different steps in the approach to design the hydraulic system. Finally the results...

  7. Critical Race Design: An Emerging Methodological Approach to Anti-Racist Design and Implementation Research

    Science.gov (United States)

    Khalil, Deena; Kier, Meredith

    2017-01-01

    This article is about introducing Critical Race Design (CRD), a research methodology that centers race and equity at the nucleus of educational opportunities by design. First, the authors define design-based implementation research (DBIR; Penuel, Fishman, Cheng, & Sabelli, 2011) as an equity-oriented education research methodology where…

  8. A Simulation Modeling Approach Method Focused on the Refrigerated Warehouses Using Design of Experiment

    Science.gov (United States)

    Cho, G. S.

    2017-09-01

    For performance optimization of Refrigerated Warehouses, design parameters are selected based on the physical parameters such as number of equipment and aisles, speeds of forklift for ease of modification. This paper provides a comprehensive framework approach for the system design of Refrigerated Warehouses. We propose a modeling approach which aims at the simulation optimization so as to meet required design specifications using the Design of Experiment (DOE) and analyze a simulation model using integrated aspect-oriented modeling approach (i-AOMA). As a result, this suggested method can evaluate the performance of a variety of Refrigerated Warehouses operations.

  9. Service design as an approach to new service development : reflections and futures studies

    OpenAIRE

    Yu, Eun; Sangiorgi, Daniela

    2014-01-01

    This paper illustrates how, although Service Design has been described as evolving from a narrow description of a phase in New Service Development (NSD) to an approach to Service Innovation, the current Service Design research is still focused on the initial stages of NSD. Comparing existing Service Design research with foundational knowledge on NSD, the authors have proposed two complementary directions for future Service Design studies: 1) the expansion of ‘service design as a phase’ to inv...

  10. In search of viable business models for development: sustainable energy in developing countries

    NARCIS (Netherlands)

    Kolk, A.; van den Buuse, D.

    2012-01-01

    Purpose - Although the crucial role of business, and of business-based approaches, in development is increasingly emphasised by academics and practitioners, insight is lacking into the "whether and how" of viable business models, in environmental, social and economical terms. This article analyses

  11. New approaches to design HIV-1 T-cell vaccines.

    Science.gov (United States)

    Perrin, Hélène; Canderan, Glenda; Sékaly, Rafick-Pierre; Trautmann, Lydie

    2010-09-01

    Following the evidence that T-cell responses are crucial in the control of HIV-1 infection, vaccines targeting T-cell responses were tested in recent clinical trials. However, these vaccines showed a lack of efficacy. This review attempts to define the qualitative and quantitative features that are desirable for T-cell-induced responses by vaccines. We also describe strategies that could lead to achievement of this goal. Using the yellow fever vaccine as a benchmark of an efficient vaccine, recent studies identified factors of immune protection and more importantly innate immune pathways needed for the establishment of long-term protective adaptive immunity. To prevent or control HIV-1 infection, a vaccine must induce efficient and persistent antigen-specific T cells endowed with mucosal homing capacity. Such cells should have the capability to counteract HIV-1 diversity and its rapid spread from the initial site of infection. To achieve this goal, the activation of a diversified innate immune response is critical. New systems biology approaches will provide more precise correlates of immune protection that will pave the way for new approaches in T-cell-based vaccines.

  12. An analytics approach to designing patient centered medical homes.

    Science.gov (United States)

    Ajorlou, Saeede; Shams, Issac; Yang, Kai

    2015-03-01

    Recently the patient centered medical home (PCMH) model has become a popular team based approach focused on delivering more streamlined care to patients. In current practices of medical homes, a clinical based prediction frame is recommended because it can help match the portfolio capacity of PCMH teams with the actual load generated by a set of patients. Without such balances in clinical supply and demand, issues such as excessive under and over utilization of physicians, long waiting time for receiving the appropriate treatment, and non-continuity of care will eliminate many advantages of the medical home strategy. In this paper, by using the hierarchical generalized linear model with multivariate responses, we develop a clinical workload prediction model for care portfolio demands in a Bayesian framework. The model allows for heterogeneous variances and unstructured covariance matrices for nested random effects that arise through complex hierarchical care systems. We show that using a multivariate approach substantially enhances the precision of workload predictions at both primary and non primary care levels. We also demonstrate that care demands depend not only on patient demographics but also on other utilization factors, such as length of stay. Our analyses of a recent data from Veteran Health Administration further indicate that risk adjustment for patient health conditions can considerably improve the prediction power of the model.

  13. Design Approach of Biologically-Inspired Musculoskeletal Humanoids

    Directory of Open Access Journals (Sweden)

    Yuto Nakanishi

    2013-04-01

    Full Text Available In order to realize more natural and various motions like humans, humanlike musculoskeletal tendon-driven humanoids have been studied. Especially, it is very challenging to design musculoskeletal body structure which consists of complicated bones, redundant powerful and flexible muscles, and large number of distributed sensors. In addition, it is very challenging to reveal humanlike intelligence to manage these complicated musculoskeletal body structure. This paper sums up life-sized musculoskeletal humanoids Kenta, Kotaro, Kenzoh and Kenshiro which we have developed so far, and describes key technologies to develop and control these robots.

  14. Graphene Based Terahertz Absorber Designed With Effective Surface Conductivity Approach

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Pizzocchero, Filippo; Booth, Tim

    Young field of terahertz (THz) science and technology demands new materials and devices, such as filters, modulators, polarization converters and absorbers. Graphene, a recently discovered single-atom-thick material, provides exciting properties for functional terahertz applications. Graphene...... conductivity and how to use it in optical design. We demonstrate a tunable THz perfect absorber, which consists of continuous graphene various structured graphene metamaterials above a metal mirror. Changing the Fermi level from 0 eV to 0.5 eV allows for drastic changes in absorbance from less than 0.1 to 1...

  15. An engineering approach to an integrated value proposition design framework

    Directory of Open Access Journals (Sweden)

    Van Der Merwe, Carmen

    2015-05-01

    Full Text Available Numerous problems with product quality and time-to-market launches can be traced back to how the product lifecycle process is managed within the organisation. This article provides insight into how an integrated value proposition design framework shifts product lifecycle management from a product-centric view to a customer-centric view, through the use of good engineering practices as found in the systems engineering discipline. Combining this with methods and tools such as the Refined Kano model, Blue Ocean strategy, and the Generalised Bass model enables the organisation to enhance product and service quality while reducing the time-to-market for new value proposition launches.

  16. Modern analog filter analysis and design a practical approach

    CERN Document Server

    Raut, R

    2011-01-01

    Starting from the fundamentals, the present book describes methods of designing analog electronic filters and illustrates these methods by providing numerical and circuit simulation programs. The subject matters comprise many concepts and techniques that are not available in other text books on the market. To name a few - principle of transposition and its application in directly realizing current mode filters from well known voltage mode filters; an insight into the technological aspect of integrated circuit components used to implement an integrated circuit filter; a careful blending of basi

  17. An interactive and flexible approach to stamping design and optimization

    International Nuclear Information System (INIS)

    Roy, Subir; Kunju, Ravi; Kirby, David

    2004-01-01

    This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

  18. Projects: viable alternatives in the Environmental Education?

    Directory of Open Access Journals (Sweden)

    Marcos Jose Terossi

    2011-11-01

    Full Text Available In this article we are going to develop the reflection about the projects, its genesis, its use in education and environmental education.To this end, we will promote the discussion about the so-called "method of projects" and "projects pedagogy", with a comparison between them and outlining the approach that we consider most appropriate to EA, its limits and possibilities within the critical perspective, manufacturing and emancipatory education.

  19. A generic approach for the design of organizational decision support systems (ODSS)

    OpenAIRE

    Chalal, Rachid; National Institute of Computer Science; Nader, Fahima; National Institute of Computer Science

    2007-01-01

    The paper proposes a generic approach to design and develop an Organizational Decision Support System (ODSS). This approach is based at the follows definition: the ODSS is considered as the experts' memory and their decision-taking. Therefore, the ODSS is constituted by two elements, a strategic DSS and a specific referential of the decision situation. Our generic approach for ODSS design is based on the MUSIC (Management and Use of Co-operative Information Systems) model. An illustration of ...

  20. Mapping the Hot Spots: A Zoning Approach to Space Analysis and Design

    Science.gov (United States)

    Bunnell, Adam; Carpenter, Russell; Hensley, Emily; Strong, Kelsey; Williams, ReBecca; Winter, Rachel

    2016-01-01

    This article examines a preliminary approach to space design developed and implemented in Eastern Kentucky University's Noel Studio for Academic Creativity. The approach discussed here is entitled "hot spots," which has allowed the research team to observe trends in space usage and composing activities among students. This approach has…

  1. Design for Survivability: An Approach to Assured Autonomy

    Science.gov (United States)

    Alexandrov, Natalia M.; Ozoroski, Thomas A.

    2016-01-01

    Rapidly expanding unmanned air traffic includes and will continue to include non-cooperative participants. Non-cooperative behavior may be due to technical failure, a lack of appropriate equipment, a careless or malicious operator. Regardless of the cause, the outcome remains: growing density of non-cooperative traffic will increase the risk of collision between unmanned vehicles and aircraft carrying humans. As a result, the degraded safety of airspace may limit access to airspace, with adverse consequences for the traveling public and the economy. Because encounters with small non-cooperative objects, such as birds or wayward drones, can happen too rapidly for an external control system to mitigate them, it is imperative that the aircraft that carry humans survive encounters with non-cooperative vehicles. To-date, design for survivability has been practiced explicitly in the military domain. Survivability against collisions in civil aviation has been limited to tolerances against bird strikes; and these tolerances have proved inadequate on occasion. The growing risk of collision with unmanned vehicles now requires the development of survivability discipline for civilian transport aircraft. The new discipline must be infused into multidisciplinary design methods, on par with traditional disciplines. In this paper, we report on a preliminary study of survivability considerations for the civil aviation domain.

  2. Hybrid Enhanced Epidermal SpaceSuit Design Approaches

    Science.gov (United States)

    Jessup, Joseph M.

    A Space suit that does not rely on gas pressurization is a multi-faceted problem that requires major stability controls to be incorporated during design and construction. The concept of Hybrid Epidermal Enhancement space suit integrates evolved human anthropomorphic and physiological adaptations into its functionality, using commercially available bio-medical technologies to address shortcomings of conventional gas pressure suits, and the impracticalities of MCP suits. The prototype HEE Space Suit explored integumentary homeostasis, thermal control and mobility using advanced bio-medical materials technology and construction concepts. The goal was a space suit that functions as an enhanced, multi-functional bio-mimic of the human epidermal layer that works in attunement with the wearer rather than as a separate system. In addressing human physiological requirements for design and construction of the HEE suit, testing regimes were devised and integrated into the prototype which was then subject to a series of detailed tests using both anatomical reproduction methods and human subject.

  3. One approach to design of speech emotion database

    Science.gov (United States)

    Uhrin, Dominik; Chmelikova, Zdenka; Tovarek, Jaromir; Partila, Pavol; Voznak, Miroslav

    2016-05-01

    This article describes a system for evaluating the credibility of recordings with emotional character. Sound recordings form Czech language database for training and testing systems of speech emotion recognition. These systems are designed to detect human emotions in his voice. The emotional state of man is useful in the security forces and emergency call service. Man in action (soldier, police officer and firefighter) is often exposed to stress. Information about the emotional state (his voice) will help to dispatch to adapt control commands for procedure intervention. Call agents of emergency call service must recognize the mental state of the caller to adjust the mood of the conversation. In this case, the evaluation of the psychological state is the key factor for successful intervention. A quality database of sound recordings is essential for the creation of the mentioned systems. There are quality databases such as Berlin Database of Emotional Speech or Humaine. The actors have created these databases in an audio studio. It means that the recordings contain simulated emotions, not real. Our research aims at creating a database of the Czech emotional recordings of real human speech. Collecting sound samples to the database is only one of the tasks. Another one, no less important, is to evaluate the significance of recordings from the perspective of emotional states. The design of a methodology for evaluating emotional recordings credibility is described in this article. The results describe the advantages and applicability of the developed method.

  4. New approaches to aseismic design and testing in Japan

    International Nuclear Information System (INIS)

    Ohsaki, Y.

    1980-01-01

    Problems of seismic safety and stability of the NPP components are discussed. Main provisions of safety standards being in force in Japan since 1978 are considered. Main specifications of the large-scale vibration-testing machine constructed for testing the mockups of the main components of NPPs with PWP and BWR reactors are given. In accordance with the rules of aseismic component design each element of a reactor must preserve its integrity under any possible seismic effects. Depending on the degree of radioactive contamination of environment resulted from the earthquake, the nuclear reactor equipment is divided into four classes. All buildings, accessories, pipelines and other equipment are also devided into four classes. The rules involve the estimation of seismic stability of components by the statical method on the base of the seismic stability coefficient established by the building standards. The method of ''time historical analysis'', in which the seismic design waves are used as input signals, is applied for the dynamic analysis of buildings; and for the equipment, pipelines and other elements the method of ''spectral analysis'' is used. In the future it is suggested to carry out the fundamental investigations of the NPP equipment safety and reliability, supported by corresponding experimental data, both from the point of view of arizing stresses and serviceability of all components directly at the moment of the earthquake beginning [ru

  5. Heuristic urban transportation network design method, a multilayer coevolution approach

    Science.gov (United States)

    Ding, Rui; Ujang, Norsidah; Hamid, Hussain bin; Manan, Mohd Shahrudin Abd; Li, Rong; Wu, Jianjun

    2017-08-01

    The design of urban transportation networks plays a key role in the urban planning process, and the coevolution of urban networks has recently garnered significant attention in literature. However, most of these recent articles are based on networks that are essentially planar. In this research, we propose a heuristic multilayer urban network coevolution model with lower layer network and upper layer network that are associated with growth and stimulate one another. We first use the relative neighbourhood graph and the Gabriel graph to simulate the structure of rail and road networks, respectively. With simulation we find that when a specific number of nodes are added, the total travel cost ratio between an expanded network and the initial lower layer network has the lowest value. The cooperation strength Λ and the changeable parameter average operation speed ratio Θ show that transit users' route choices change dramatically through the coevolution process and that their decisions, in turn, affect the multilayer network structure. We also note that the simulated relation between the Gini coefficient of the betweenness centrality, Θ and Λ have an optimal point for network design. This research could inspire the analysis of urban network topology features and the assessment of urban growth trends.

  6. Suggest an Aspect-Oriented Design Approach for UML Communication Diagram

    OpenAIRE

    Nather, Mohammed F.; Saleem, Dr. Nada N.

    2013-01-01

    More and more works are done on the design of the Unified Modeling Language (UML) which is designed to help us for modeling effective object oriented software, Existing Object-Oriented design methods are not mature enough to capture non-functional requirement such as concurrency, fault tolerance, distribution and persistence of a software approach. Our approach proposed to use aspect-oriented software development (AOSD) mechanisms to solve the issues for interactions of the communication diag...

  7. Perturbation approach to design of circularly polarised microstrip antennas

    Science.gov (United States)

    Lo, Y. T.; Richards, W. F.

    1981-05-01

    One of the most interesting applications of microstrip antennas is its use for transmitting or receiving circularly polarized (CP) waves. A description is given of a simple but accurate method to determine the critical dimensions needed to produce circular polarization for nearly square and nearly circular microstrip antennas. Shen (1981) in connection with the determination of the proper dimensions of an elliptical patch CP microstrip antenna first expressed the modal field in terms of Mathieu functions. To avoid the complicated numerical computation of the Mathieu functions, he approximated these functions in terms of Bessel functions. It is pointed out that the computation of Mathieu functions, or their approximate expressions can be avoided altogether if a perturbation method is applied to find the resonant frequencies of the two orthogonal modes. The implementation of this approach is demonstrated.

  8. Possibility of object recognition using Altera's model based design approach

    International Nuclear Information System (INIS)

    Tickle, A J; Harvey, P K; Smith, J S; Wu, F

    2009-01-01

    Object recognition is an image processing task of finding a given object in a selected image or video sequence. Object recognition can be divided into two areas: one of these is decision-theoretic and deals with patterns described by quantitative descriptors, for example such as length, area, shape and texture. With this Graphical User Interface Circuitry (GUIC) methodology employed here being relatively new for object recognition systems, the aim of this work is to identify if the developed circuitry can detect certain shapes or strings within the target image. A much smaller reference image feeds the preset data for identification, tests are conducted for both binary and greyscale and the additional mathematical morphology to highlight the area within the target image with the object(s) are located is also presented. This then provides proof that basic recognition methods are valid and would allow the progression to developing decision-theoretical and learning based approaches using GUICs for use in multidisciplinary tasks.

  9. Design of Quiet Rotorcraft Approach Trajectories: Verification Phase

    Science.gov (United States)

    Padula, Sharon L.

    2010-01-01

    Flight testing that is planned for October 2010 will provide an opportunity to evaluate rotorcraft trajectory optimization techniques. The flight test will involve a fully instrumented MD-902 helicopter, which will be flown over an array of microphones. In this work, the helicopter approach trajectory is optimized via a multiobjective genetic algorithm to improve community noise, passenger comfort, and pilot acceptance. Previously developed optimization strategies are modified to accommodate new helicopter data and to increase pilot acceptance. This paper describes the MD-902 trajectory optimization plus general optimization strategies and modifications that are needed to reduce the uncertainty in noise predictions. The constraints that are imposed by the flight test conditions and characteristics of the MD-902 helicopter limit the testing possibilities. However, the insights that will be gained through this research will prove highly valuable.

  10. Approaches to the design of low-cost HUD systems

    Science.gov (United States)

    Wisely, Paul L.; Bleha, Willaim P.

    2014-06-01

    Since their inception during the Second World War in the simple gyro reflector gun sights of combat aircraft such as the Supermarine Spitfire, HUDs have been developed to achieve ever greater capability and performance, initially in military applications but in the final quarter of the last century for civil applications. With increased performance and capability came increased complexity and an attendant steady increase in cost such that HUDs in civil applications are only to be found in some large passenger and high end business jets. The physical volume of current solutions also has a significant impact on where they may be fitted and this paper discusses techniques and approaches to reduce the volume and costs associated with HUD implementation thereby making the operational and safety benefits of HUD available to a broader range of applications in lower cost airframes.

  11. Designing sustainable work systems: the need for a systems approach.

    Science.gov (United States)

    Zink, Klaus J

    2014-01-01

    There is a growing discussion concerning sustainability. While this discussion was at first mainly focused on a society level--and sometimes regarding especially environmental problems, one can now see that this topic is of increasing relevance for companies worldwide and even the social dimension of this three pillar approach is gaining more and more importance. This leads to some questions: Is sustainability already a part of human factors thinking or do we have to further develop our discipline? How can we define sustainable work systems? What are the topics we have to consider? Do we need a new systems ergonomics perspective regarding whole value creation chains and a life-cycle perspective concerning products (and work systems)? How can we deal with potential contradictions about social, ecological, and economic goals? Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  12. Asouzu's Complementary Ontology as a Foundation for a Viable ...

    African Journals Online (AJOL)

    This paper on “Asouzu's Complementary Ontology as a foundation for a viable Ethic of the Environment”, posits that an ethic of the environment can be seen as viable if it considers the whole of reality as ontologically relevant. This point of view would free environmental ethics of anthropocentric bias and its attendant ...

  13. A modern approach to designing ice rinks and arenas

    Energy Technology Data Exchange (ETDEWEB)

    Kosonen, R.; Laitinen, A. [VTT Building Technology (Finland)

    1998-06-01

    Energy consumption and operating costs are important issues for ice-skating rinks, where they have to be considered alongside indoor climate and ice quality. The energy consumption of an ice area is determined by its construction characteristics, plant system and operational aspects. Another key factor is the ice; most energy flows are connected in some way to the refrigeration process. The potential for energy savings, design features that help to reduce operating costs, the energy audit programme coordinated by the Finnish Ice Hockey Association and the example of the renovation of an ice rink at Laitila in Finland are described. The components of energy efficient ice areas (lighting, ice resurfacing, ventilation, refrigeration, automation, construction and envelope) are summarised in a diagram.

  14. The 'design as you go' approach in subsurface exploration planning

    International Nuclear Information System (INIS)

    Sprecher, C.; Kappeler, S.

    1995-01-01

    'Design as you go' in repository construction requires a clear concept of possible scenarios and the identification of decision-points. Between decision-points it has to be ensured, whenever possible, that geological information affecting the repository layout is acquired, digested and projected at a rate which is fast enough to keep pace with tunnel excavation. On the basis of a simplified model of the 'Wellenberg' L/ILW (low and intermediate level waste) site in Switzerland, an attempt is made to show how layout-determining geological features could be defined, identified and characterized, using a formalized data acquisition routine, and how the information is fed back to allow the line of the tunnel to be optimized. (author). 5 figs

  15. Inelastic structural design approach using their relaxation locus

    International Nuclear Information System (INIS)

    Kasahara, Naoto

    2000-08-01

    Elevated temperature structural design codes pay attention to strain concentration at structural discontinuities due to creep and plasticity, since it causes to enlarge creep-fatigue damage of materials. One of the difficulties to predict strain concentration is its dependency on loading, constitutive equations, and relaxation time. This study investigated fundamental mechanism of strain concentration and its main factors. The results revealed that strain concentration was caused from strain redistribution between elastic and inelastic region, which can be quantified by the characteristics of structural compliance. Characteristic of compliance is controlled by elastic region in structures and is insensitive to constitutive equations. It means that inelastic analysis is easily applied to get compliance characteristics. By utilizing this fact, simplified inelastic analysis method was proposed based on characteristics of compliance change for prediction of strain concentration. (author)

  16. A Multilevel Approach for Social Transformations and its Implications on Service Design Education

    DEFF Research Database (Denmark)

    Morelli, Nicola; Götzen, Amalia De

    2017-01-01

    This paper is looking at two parallel transformations -in the methodological approach to service design and in the way new social initiatives are designing new solutions – to suggest a framework to re-organise service design education. The paradigmatic framework for the service design discipline...... and are framed in production/business models that do not refer to the value-chain model that inspired the industrial paradigm. Both those transformations are challenging the discipline of service design and in particular service design education, because it calls for a perspective shift, from a normative...... is shifting from a methodological approach that qualified services as “what is not a product” to a new approach that moves the control over the value creation process from designers and producers to the interaction among a constellation of stakeholders. Together with this shift, a parallel transformation can...

  17. Systematic approach to designing surface covers for uranium-mill tailings

    International Nuclear Information System (INIS)

    Beedlow, P.A.; Cadwell, L.L.; McShane, M.C.

    1982-01-01

    The wide range of environmental conditions present at uranium mill tailings sites precludes the use of a single type of surface cover. Surface covers must be designed on a site-specific basis. To facilitate site specific designs the UMTRA program is developing guidelines for designing surface covers. This paper presents a systematic approach to designing surface covers for tailings that can be applied under any site condition. The approach consists of three phases: (1) An assessment during which the degree of surface protection is determined. (2) A preliminary design that facilitates interaction with those designing other containment system elements. (3) A final design where the cost and effectiveness of the surface cover are determined. The types of information required to apply this approach are discussed

  18. Radiation protection/shield design: a need for a systems approach

    International Nuclear Information System (INIS)

    Disney, R.K.

    1977-01-01

    Radiation protection/shielding design of a nuclear facility requires a coordinated effort of many engineering disciplines to meet the requirements imposed by regulations. The system approach to Clinch River Breeder Reactor Plant (CRBRP) radiation protection is described, and the program developed to implement this approach is defined. In addition, the principal shielding design problems for LMFBR nuclear reactor systems are discussed in relation to LWR nuclear reactor system shielding designs. The methodology used to analyze these problems in the U.S. LMFBR program, the resultant design solutions, and the experimental verification of these designs and/or methods are discussed

  19. Design surface covers: an approach to long-term waste site stabilization

    International Nuclear Information System (INIS)

    Beedlow, P.A.; Cadwell, L.L.; McShane, M.C.

    1983-02-01

    The wide range of existing environmental conditions, potential contaminants and available cover materials at waste disposal sites necessitates site-specific designing of surface covers for effective long-term erosion resistance. This paper presents a systematic approach to designing surface covers for hazardous waste repositories that can be tailored to conditions at any site. The approach consists of three phases: (1) an assessment, during which the degree of required surface protection (erosion potential) is determined; (2) a preliminary design that integrates surface cover design with the need to minimize transport of contaminants; and (3) a final design, where the cost and effectiveness of the surface cover are determined. 1 figure

  20. A Cost Effective System Design Approach for Critical Space Systems

    Science.gov (United States)

    Abbott, Larry Wayne; Cox, Gary; Nguyen, Hai

    2000-01-01

    NASA-JSC required an avionics platform capable of serving a wide range of applications in a cost-effective manner. In part, making the avionics platform cost effective means adhering to open standards and supporting the integration of COTS products with custom products. Inherently, operation in space requires low power, mass, and volume while retaining high performance, reconfigurability, scalability, and upgradability. The Universal Mini-Controller project is based on a modified PC/104-Plus architecture while maintaining full compatibility with standard COTS PC/104 products. The architecture consists of a library of building block modules, which can be mixed and matched to meet a specific application. A set of NASA developed core building blocks, processor card, analog input/output card, and a Mil-Std-1553 card, have been constructed to meet critical functions and unique interfaces. The design for the processor card is based on the PowerPC architecture. This architecture provides an excellent balance between power consumption and performance, and has an upgrade path to the forthcoming radiation hardened PowerPC processor. The processor card, which makes extensive use of surface mount technology, has a 166 MHz PowerPC 603e processor, 32 Mbytes of error detected and corrected RAM, 8 Mbytes of Flash, and I Mbytes of EPROM, on a single PC/104-Plus card. Similar densities have been achieved with the quad channel Mil-Std-1553 card and the analog input/output cards. The power management built into the processor and its peripheral chip allows the power and performance of the system to be adjusted to meet the requirements of the application, allowing another dimension to the flexibility of the Universal Mini-Controller. Unique mechanical packaging allows the Universal Mini-Controller to accommodate standard COTS and custom oversized PC/104-Plus cards. This mechanical packaging also provides thermal management via conductive cooling of COTS boards, which are typically

  1. Applying a learning design methodology in the flipped classroom approach – empowering teachers to reflect and design for learning

    Directory of Open Access Journals (Sweden)

    Evangelia Triantafyllou

    2016-05-01

    Full Text Available One of the recent developments in teaching that heavily relies on current technology is the “flipped classroom” approach. In a flipped classroom the traditional lecture and homework sessions are inverted. Students are provided with online material in order to gain necessary knowledge before class, while class time is devoted to clarifications and application of this knowledge. The hypothesis is that there could be deep and creative discussions when teacher and students physically meet. This paper discusses how the learning design methodology can be applied to represent, share and guide educators through flipped classroom designs. In order to discuss the opportunities arising by this approach, the different components of the Learning Design – Conceptual Map (LD-CM are presented and examined in the context of the flipped classroom. It is shown that viewing the flipped classroom through the lens of learning design can promote the use of theories and methods to evaluate its effect on the achievement of learning objectives, and that it may draw attention to the employment of methods to gather learner responses. Moreover, a learning design approach can enforce the detailed description of activities, tools and resources used in specific flipped classroom models, and it can make educators more aware of the decisions that have to be taken and people who have to be involved when designing a flipped classroom. By using the LD-CM, this paper also draws attention to the importance of characteristics and values of different stakeholders (i.e. institutions, educators, learners, and external agents, which influence the design and success of flipped classrooms. Moreover, it looks at the teaching cycle from a flipped instruction model perspective and adjusts it to cater for the reflection loops educators are involved when designing, implementing and re-designing a flipped classroom. Finally, it highlights the effect of learning design on the guidance

  2. Reactor design and safety approach for a tank-type fast reactor

    International Nuclear Information System (INIS)

    Davies, S.M.; Yamaki, Hideo; Goodman, L.

    1984-06-01

    A tank type plant has been designed that offers compactness, high reliability under seismic and thermal transients, and a safety design approach that provides a balance between public safety and plant availability. This report provides a description of the design philosophy and safety features of the reactor

  3. A Participatory Design Approach for a Mobile App-Based Personal Response System

    Science.gov (United States)

    Song, Donggil; Oh, Eun Young

    2016-01-01

    This study reports on a participatory design approach including the design, development, implementation, and evaluation of a mobile app-based personal response system (PRS). The first cycle formulated initial design principles through context and needs analysis; the second utilized the collaboration with instructors and experts embodying specific…

  4. A lightweight approach for designing enterprise architectures using BPMN : an application in hospitals

    NARCIS (Netherlands)

    Barros, O.; Seguel Pérez, R.E.; Quezada, A.; Dijkman, R.; Hofstetter, J.; Koehler, J.

    2011-01-01

    An Enterprise Architecture (EA) comprises different models at different levels of abstraction. Since existing EA design approaches, e.g. MDA, use UML for modeling, the design of the architecture becomes complex and time consuming. In this paper, we present an integrated and lightweight design

  5. Design principles for simulation games for learning clinical reasoning: A design-based research approach.

    Science.gov (United States)

    Koivisto, J-M; Haavisto, E; Niemi, H; Haho, P; Nylund, S; Multisilta, J

    2018-01-01

    Nurses sometimes lack the competence needed for recognising deterioration in patient conditions and this is often due to poor clinical reasoning. There is a need to develop new possibilities for learning this crucial competence area. In addition, educators need to be future oriented; they need to be able to design and adopt new pedagogical innovations. The purpose of the study is to describe the development process and to generate principles for the design of nursing simulation games. A design-based research methodology is applied in this study. Iterative cycles of analysis, design, development, testing and refinement were conducted via collaboration among researchers, educators, students, and game designers. The study facilitated the generation of reusable design principles for simulation games to guide future designers when designing and developing simulation games for learning clinical reasoning. This study makes a major contribution to research on simulation game development in the field of nursing education. The results of this study provide important insights into the significance of involving nurse educators in the design and development process of educational simulation games for the purpose of nursing education. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Presenting a Multi-level Superstructure Optimization Approach for Mechatronic System Design

    DEFF Research Database (Denmark)

    Pedersen, Henrik C.; Andersen, Torben Ole; Bech, Michael Møller

    2010-01-01

    Synergism and integration in the design process is what sets apart a Mechatronic System from a traditional, multidisciplinary system. However the typical design approach has been to divide the design problem into sub problems for each technology area (mechanics, electronics and control) and descr......Synergism and integration in the design process is what sets apart a Mechatronic System from a traditional, multidisciplinary system. However the typical design approach has been to divide the design problem into sub problems for each technology area (mechanics, electronics and control......) and describe the interface between the technologies, whereas the lack of well-established, systematic engineering methods to form the basic set-off in analysis and design of complete mechatronic systems has been obvious. The focus of the current paper is therefore to present an integrated design approach...... for mechatronic system design, utilizing a multi-level superstructure optimization based approach. Finally two design examples are presented and the possibilities and limitations of the approach are outlined....

  7. Issues of organizational cybernetics and viability beyond Beer's viable systems model

    Science.gov (United States)

    Nechansky, Helmut

    2013-11-01

    The paper starts summarizing the claims of Beer's viable systems model to identify five issues any viable organizations has to deal with in an unequivocal hierarchical structure of five interrelated systems. Then the evidence is introduced for additional issues and related viable structures of organizations, which deviate from Beer's model. These issues are: (1) the establishment and (2) evolution of an organization; (3) systems for independent top-down control (like "Six Sigma"); (4) systems for independent bottom-up correction of performance problems (like "Kaizen"), both working outside a hierarchical structure; (5) pull production systems ("Just in Time") and (6) systems for checks and balances of top-level power (like boards and shareholder meetings). Based on that an evolutionary approach to organizational cybernetics is outlined, addressing the establishment of organizations and possible courses of developments, including recent developments in quality and production engineering, as well as problems of setting and changing goal values determining organizational policies.

  8. Navigating towards Decoupled Aquaponic Systems: A System Dynamics Design Approach

    Directory of Open Access Journals (Sweden)

    Simon Goddek

    2016-07-01

    Full Text Available The classical working principle of aquaponics is to provide nutrient-rich aquacultural water to a hydroponic plant culture unit, which in turn depurates the water that is returned to the aquaculture tanks. A known drawback is that a compromise away from optimal growing conditions for plants and fish must be achieved to produce both crops and fish in the same environmental conditions. The objective of this study was to develop a theoretical concept of a decoupled aquaponic system (DAPS, and predict water, nutrient (N and P, fish, sludge, and plant levels. This has been approached by developing a dynamic aquaponic system model, using inputs from data found in literature covering the fields of aquaculture, hydroponics, and sludge treatment. The outputs from the model showed the dependency of aquacultural water quality on the hydroponic evapotranspiration rate. This result can be explained by the fact that DAPS is based on one-way flows. These one-way flows results in accumulations of remineralized nutrients in the hydroponic component ensuring optimal conditions for the plants. The study also suggests to size the cultivation area based on P availability in the hydroponic component as P is an exhaustible resource and has been identified one of the main limiting factors for plant growth.

  9. A Process Algebraic Approach to Software Architecture Design

    Science.gov (United States)

    Aldini, Alessandro; Bernardo, Marco; Corradini, Flavio

    Process algebra is a formal tool for the specification and the verification of concurrent and distributed systems. It supports compositional modeling through a set of operators able to express concepts like sequential composition, alternative composition, and parallel composition of action-based descriptions. It also supports mathematical reasoning via a two-level semantics, which formalizes the behavior of a description by means of an abstract machine obtained from the application of structural operational rules and then introduces behavioral equivalences able to relate descriptions that are syntactically different. In this chapter, we present the typical behavioral operators and operational semantic rules for a process calculus in which no notion of time, probability, or priority is associated with actions. Then, we discuss the three most studied approaches to the definition of behavioral equivalences - bisimulation, testing, and trace - and we illustrate their congruence properties, sound and complete axiomatizations, modal logic characterizations, and verification algorithms. Finally, we show how these behavioral equivalences and some of their variants are related to each other on the basis of their discriminating power.

  10. Food chain design using multi criteria decision making, an approach to complex design issues

    NARCIS (Netherlands)

    Linnemann, A.R.; Hendrix, E.M.T.; Apaiah, R.K.; Boekel, van M.A.J.S.

    2015-01-01

    Designing a food supply chain for a completely new product involves many stakeholders and knowledge from disciplines in natural and social sciences. This paper describes how Multi Criteria Decision Making (MCDM) facilitated designing a food supply chain in a case of Novel Protein Foods. It made the

  11. Developing an emergency department crowding dashboard: A design science approach.

    Science.gov (United States)

    Martin, Niels; Bergs, Jochen; Eerdekens, Dorien; Depaire, Benoît; Verelst, Sandra

    2017-08-30

    As an emergency department (ED) is a complex adaptive system, the analysis of continuously gathered data is valuable to gain insight in the real-time patient flow. To support the analysis and management of ED operations, relevant data should be provided in an intuitive way. Within this context, this paper outlines the development of a dashboard which provides real-time information regarding ED crowding. The research project underlying this paper follows the principles of design science research, which involves the development and study of artifacts which aim to solve a generic problem. To determine the crowding indicators that are desired in the dashboard, a modified Delphi study is used. The dashboard is implemented using the open source Shinydashboard package in R. A dashboard is developed containing the desired crowding indicators, together with general patient flow characteristics. It is demonstrated using a dataset of a Flemish ED and fulfills the requirements which are defined a priori. The developed dashboard provides real-time information on ED crowding. This information enables ED staff to judge whether corrective actions are required in an effort to avoid the adverse effects of ED crowding. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. SYSTEMATIC PRINCIPLES AND METHODS OF SYMBOLIC APPROACHES IN URBAN DESIGN

    Directory of Open Access Journals (Sweden)

    BULAKH I. V

    2015-12-01

    Full Text Available Formulation of the problem. The low level of expression and personalization of mass architecture of the second half of the twentieth century connected with the spread of industrial technology and even to a greater extent with mechanistic traditionally functional relation to the average person as, abstract consumer architecture. The condition out of the critical situation is focusing on matters aesthetic, artistic understanding and harmonious image creation environment. The problem of increasing architectural and artistic level of architectural and urban planning solutions to overcome the monotony of planning and development, creating aesthetically expressive urban environment does not lose relevance over the past decades. Understanding and acceptance of enigma and dynamic development of cities encourage architects to find new design techniques that are able to provide in the future a reasonable possibility of forming artistic and aesthetic image of the modern city. Purpose. Define and systematize the principles of symbolization architectural and planning images; propose methods symbolism in the architectural planning of image of the urban environment. Conclusion based on analysis of the enhanced concept symbolizing the image of Architecture and Planning, the place, role and symbolization trends at all levels of the urban environment - planning, three-dimensional and improvement of urban areas; first identified the main stages and levels of symbolization (analohyzatsyya, schematization and alehoryzatsiya, their features and characteristics, formulated the basic principles of symbolization architectural and planning of image, namely the principles of communication between figurative analogies, transformation of subsequent circuits, switching allegorical groupings and metamorfizm ultimate goal – symbol birth .

  13. Design of psychosocial factors questionnaires: a systematic measurement approach

    Science.gov (United States)

    Vargas, Angélica; Felknor, Sarah A

    2012-01-01

    Background Evaluation of psychosocial factors requires instruments that measure dynamic complexities. This study explains the design of a set of questionnaires to evaluate work and non-work psychosocial risk factors for stress-related illnesses. Methods The measurement model was based on a review of literature. Content validity was performed by experts and cognitive interviews. Pilot testing was carried out with a convenience sample of 132 workers. Cronbach’s alpha evaluated internal consistency and concurrent validity was estimated by Spearman correlation coefficients. Results Three questionnaires were constructed to evaluate exposure to work and non-work risk factors. Content validity improved the questionnaires coherence with the measurement model. Internal consistency was adequate (α=0.85–0.95). Concurrent validity resulted in moderate correlations of psychosocial factors with stress symptoms. Conclusions Questionnaires´ content reflected a wide spectrum of psychosocial factors sources. Cognitive interviews improved understanding of questions and dimensions. The structure of the measurement model was confirmed. PMID:22628068

  14. Packaging Design. A Systemic Approach to a Complex Artifact

    Directory of Open Access Journals (Sweden)

    Erik Ciravegna

    2017-12-01

    Full Text Available Packaging is a complex artifact, which has considerably expanded its functions over time. It is an object of use (instrumental prosthesis, which allows to contain the product, protect it, store it, transport it, and at the same time, facilitate its physical interaction with the user. Also, it is communication device (communication prosthesis, characterized by functions, among others, of appellative, persuasive, informative and prescriptive kind. For its multifaceted nature, the project of a package requires different skills and the intervention of multiple disciplines: for that reason, should be understood as the result of an integrated set of choices made by a plurality of actors, where each performs a specific role – direct or indirect – in its definition. These actors, together with the relationships that are established throughout the product life cycle, define the so-called “packaging-system”. Within this system, Design –and specifically Communication Design– may play an important role in direction and mediation, potentially giving shape through the project synthesis to solutions which are an expression of the confluence of the needs of the different parties involved and the multiple functions of the artifact, connecting the communicative dimension to a strictly instrumental dimension.

  15. Societal risk approach to safeguards design and evaluation

    International Nuclear Information System (INIS)

    Bennett, C.A.; Murphey, W.M.; Sherr, T.S.

    1975-06-01

    There has been much discussion and public debate concerning the effectiveness of the national system of safeguards against malevolent acts involving nuclear materials. Useful dialogue on this subject has been hampered by the lack of well-defined objectives, system parameters and boundary conditions as a framework for communication. This study provides such a framework. Expressing the safeguards objective in terms of societal risk represents a change in focus, rather than intent, from the earlier view of safeguards as a system for protecting nuclear material against theft or diversion. The study defines both the safeguards problem and the safeguards system in terms that can be related to the general safeguards objective. It is axiomatic that the first step to an effective solution is a careful definition of the problem. The significant and immediate value of this study lies in the rigorous definition and systematic organization of recognized elements into a coherent and comprehensive pattern. Although the title specifically addresses design and evaluation, the framework provided by the study will be a useful management tool for safeguards implementation and administration as well. (U.S.)

  16. Design for validation: An approach to systems validation

    Science.gov (United States)

    Carter, William C.; Dunham, Janet R.; Laprie, Jean-Claude; Williams, Thomas; Howden, William; Smith, Brian; Lewis, Carl M. (Editor)

    1989-01-01

    Every complex system built is validated in some manner. Computer validation begins with review of the system design. As systems became too complicated for one person to review, validation began to rely on the application of adhoc methods by many individuals. As the cost of the changes mounted and the expense of failure increased, more organized procedures became essential. Attempts at devising and carrying out those procedures showed that validation is indeed a difficult technical problem. The successful transformation of the validation process into a systematic series of formally sound, integrated steps is necessary if the liability inherent in the future digita-system-based avionic and space systems is to be minimized. A suggested framework and timetable for the transformtion are presented. Basic working definitions of two pivotal ideas (validation and system life-cyle) are provided and show how the two concepts interact. Many examples are given of past and present validation activities by NASA and others. A conceptual framework is presented for the validation process. Finally, important areas are listed for ongoing development of the validation process at NASA Langley Research Center.

  17. Nuclear power plant analysers: their approach to analysis and design

    International Nuclear Information System (INIS)

    Ancarani, A.; Zanobetti, D.

    1985-01-01

    ''Analysers'' as used for nuclear power plant simulators are powerful tools and their purpose can be variously assigned: it may vary from the aid in the design of power plants to the assistance to operators in emergency situations. A fundamental problem arising from the analysers' concept and use is the definition of the simulation capability. This can be assessed either by comparison with previous operational data statistically significant and suitably elaborated; or by comparison with theoretical (computed) values obtained from engineering codes. In both these, to take advantage of all the possibilities offered by the ''analysers'', it is mandatory that suitable terms of reference be clearly stated and agreed upon. Particular care is devoted to accuracy in the prediction of physical values both for the steady state and the transient situations. For instance, it can be seen that such evaluations can be met by specifying the maximum error on value of parameters (ordinates), save for very fast transients; the maximum error on time (abscissae) for occurrence of extreme values; the maximum error on values of extremes (ordinates); the maximum error on derivatives (slopes) for rapidly variable transients, save near extreme values. The paper also deals with a brief account of the present projects and proposals in different countries as known from various sources, and mentions a possible co-ordination at international level. (author)

  18. A design approach for small vision-based autonomous vehicles

    Science.gov (United States)

    Edwards, Barrett B.; Fife, Wade S.; Archibald, James K.; Lee, Dah-Jye; Wilde, Doran K.

    2006-10-01

    This paper describes the design of a small autonomous vehicle based on the Helios computing platform, a custom FPGA-based board capable of supporting on-board vision. Target applications for the Helios computing platform are those that require lightweight equipment and low power consumption. To demonstrate the capabilities of FPGAs in real-time control of autonomous vehicles, a 16 inch long R/C monster truck was outfitted with a Helios board. The platform provided by such a small vehicle is ideal for testing and development. The proof of concept application for this autonomous vehicle was a timed race through an environment with obstacles. Given the size restrictions of the vehicle and its operating environment, the only feasible on-board sensor is a small CMOS camera. The single video feed is therefore the only source of information from the surrounding environment. The image is then segmented and processed by custom logic in the FPGA that also controls direction and speed of the vehicle based on visual input.

  19. Reinvestigating nanoprecipitation via Box-Behnken design: a systematic approach.

    Science.gov (United States)

    Singh, Yuvraj; Ojha, Preeti; Srivastava, Mukesh; Chourasia, Manish K

    2015-01-01

    This work demonstrates Box-Behnken design (BBD)'s capability in exploring scientific principles governing a process, different from its use in process optimisation. We have investigated nanoprecipitation (NP) of temozolomide with polycaprolactone. Five factors, surfactant, stirring speed (SS), dropping rate (DR), phase-volume ratio (PVR) and drug-polymer ratio (DPR) were varied over three levels. Corresponding particle size (238.9 ± 42.24 nm), zeta potential (ZP, -5.92 ± 3.15 mV), poly dispersity index (PDI, 0.176 ± 0.06) and entrapment efficiency (EE, 65.74 ± 9.83%) were put into different polynomial equations. Analysis of variance, lack of fit tests and regression analysis was applied on these equations to determine the one with best fit. This selected equation was subsequently adapted as the model to describe influence of factors on NP. 3D response surface plots corresponding to models and diagnostic plots relatable to normality of residuals were also constructed. In conclusion, application of BBD efficiently strategised experimental foray conducted to elucidate NP.

  20. Missing links between lean startup, design thinking, and experiential learning approaches in entrepreneurship education

    DEFF Research Database (Denmark)

    Ramsgaard, Michael Breum; Christensen, Marie Ernst

    2016-01-01

    Questions we care about • How do different pedagogical teaching approaches in entrepreneurship education construct learning outcome when comparing the underlying pedagogical models? • Where can unidentified fields and correlations of pedagogical insights between the approaches of lean startup......, design thinking, and experiential learning be identified? • How can new concepts of learning models, taking lean startup, design thinking and experiential learning approaches into account, be developed in entrepreneurship education? Approach This 3e conference paper begins as a conceptual paper...... highlighting the theories and underlying learning models behind three pedagogical approaches within entrepreneurship education, namely lean startup, design thinking and experiential learning. The paper builds this knowledge framework in order to set the design for an empirical investigation of the proposed...

  1. Mapping In Vivo Tumor Oxygenation within Viable Tumor by 19F-MRI and Multispectral Analysis

    Directory of Open Access Journals (Sweden)

    Yunzhou Shi

    2013-11-01

    Full Text Available Quantifying oxygenation in viable tumor remains a major obstacle toward a better understanding of the tumor microenvironment and improving treatment strategies. Current techniques are often complicated by tumor heterogeneity. Herein, a novel in vivo approach that combines 19F magnetic resonance imaging (19F-MRIR1 mapping with diffusionbased multispectral (MS analysis is introduced. This approach restricts the partial pressure of oxygen (pO2 measurements to viable tumor, the tissue of therapeutic interest. The technique exhibited sufficient sensitivity to detect a breathing gas challenge in a xenograft tumor model, and the hypoxic region measured by MS 19F-MRI was strongly correlated with histologic estimates of hypoxia. This approach was then applied to address the effects of antivascular agents on tumor oxygenation, which is a research question that is still under debate. The technique was used to monitor longitudinal pO2 changes in response to an antibody to vascular endothelial growth factor (B20.4.1.1 and a selective dual phosphoinositide 3-kinase/mammalian target of rapamycin inhibitor (GDC-0980. GDC-0980 reduced viable tumor pO2 during a 3-day treatment period, and a significant reduction was also produced by B20.4.1.1. Overall, this method provides an unprecedented view of viable tumor pO2 and contributes to a greater understanding of the effects of antivascular therapies on the tumor's microenvironment.

  2. The design of neonatal incubators: a systems-oriented, human-centered approach.

    Science.gov (United States)

    Ferris, T K; Shepley, M M

    2013-04-01

    This report describes a multidisciplinary design project conducted in an academic setting reflecting a systems-oriented, human-centered philosophy in the design of neonatal incubator technologies. Graduate students in Architectural Design and Human Factors Engineering courses collaborated in a design effort that focused on supporting the needs of three user groups of incubator technologies: infant patients, family members and medical personnel. Design teams followed established human-centered design methods that included interacting with representatives from the user groups, analyzing sets of critical tasks and conducting usability studies with existing technologies. An iterative design and evaluation process produced four conceptual designs of incubators and supporting equipment that better address specific needs of the user groups. This report introduces the human-centered design approach, highlights some of the analysis findings and design solutions, and offers a set of design recommendations for future incubation technologies.

  3. A simultaneous determination of related substances by high performance liquid chromatography in a drug product using quality by design approach.

    Science.gov (United States)

    Tol, Trupti; Kadam, Nilesh; Raotole, Nilesh; Desai, Anita; Samanta, Gautam

    2016-02-05

    The combination of Abacavir, Lamivudine and Dolutegravir is an anti-retroviral formulation that displays high efficacy and superiority in comparison to other anti-retroviral combinations. Analysis of related substances in this combination drug product was very challenging due to the presence of nearly thirty peaks including the three active pharmaceutical ingredients (APIs), eleven known impurities and other pharmaceutical excipients. Objective of this study was to develop a single, selective, and robust high performance liquid chromatography method for the efficient separation of all peaks. Initially, one-factor-at-a-time (OFAT) approach was adopted to develop the method. But, it could not resolve all the critical peaks in such complex matrix. This led to the advent of two different HPLC methods for the determination of related substances, one for Abacavir and Lamivudine and the other for Dolutegravir. But, since analysis of a single sample using two methods instead of one is time and resource consuming and thus expensive, an attempt was made to develop a single and robust method by adopting quality by design (QbD) principles. Design of Experiments (DoE) was applied as a tool to achieve the optimum conditions through Response surface methodology with three method variables, pH, temperature, and mobile phase composition. As the study progressed, it was discovered that establishment of the design space was not viable due to the completely distant pH requirements of the two responses, i.e. (i) retention time for Lamivudine carboxylic acid and (ii) resolution between Abacavir impurity B and unknown impurity. Eventually, neglecting one of these two responses each time, two distinguished design spaces have been established and verified. Edge of failures at both design spaces indicate high probability of failure. It therefore, becomes very important to identify the most robust zone or normal operating range (NOR) within the design space with low risk of failure and high

  4. Photocatalytic water splitting: Quantitative approaches toward photocatalysis by design

    KAUST Repository

    Takanabe, Kazuhiro

    2017-10-11

    then be altered to further improve the process. Accumulation of knowledge ranging in fields from solid-state physics to electrochemistry and the use of a multidisciplinary approach to conduct measurements and modeling in a quantitative manner are required to fully understand and improve the efficiency of photocatalysis.

  5. Photocatalytic water splitting: Quantitative approaches toward photocatalysis by design

    KAUST Repository

    Takanabe, Kazuhiro

    2017-01-01

    then be altered to further improve the process. Accumulation of knowledge ranging in fields from solid-state physics to electrochemistry and the use of a multidisciplinary approach to conduct measurements and modeling in a quantitative manner are required to fully understand and improve the efficiency of photocatalysis.

  6. Energy-aware memory management for embedded multimedia systems a computer-aided design approach

    CERN Document Server

    Balasa, Florin

    2011-01-01

    Energy-Aware Memory Management for Embedded Multimedia Systems: A Computer-Aided Design Approach presents recent computer-aided design (CAD) ideas that address memory management tasks, particularly the optimization of energy consumption in the memory subsystem. It explains how to efficiently implement CAD solutions, including theoretical methods and novel algorithms. The book covers various energy-aware design techniques, including data-dependence analysis techniques, memory size estimation methods, extensions of mapping approaches, and memory banking approaches. It shows how these techniques

  7. Development of Canadian seismic design approach and overview of seismic standards

    Energy Technology Data Exchange (ETDEWEB)

    Usmani, A. [Amec Foster Wheeler, Toronto, ON (Canada); Aziz, T. [TSAziz Consulting Inc., Mississauga, ON (Canada)

    2015-07-01

    Historically the Canadian seismic design approaches have evolved for CANDU® nuclear power plants to ensure that they are designed to withstand a design basis earthquake (DBE) and have margins to meet the safety requirements of beyond DBE (BDBE). While the Canadian approach differs from others, it is comparable and in some cases more conservative. The seismic requirements are captured in five CSA nuclear standards which are kept up to date and incorporate lessons learnt from recent seismic events. This paper describes the evolution of Canadian approach, comparison with others and provides an overview and salient features of CSA seismic standards. (author)

  8. Merged ontology for engineering design: Contrasting empirical and theoretical approaches to develop engineering ontologies

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Storga, M

    2009-01-01

    to developing the ontology engineering design integrated taxonomies (EDIT) with a theoretical approach in which concepts and relations are elicited from engineering design theories ontology (DO) The limitations and advantages of each approach are discussed. The research methodology adopted is to map......This paper presents a comparison of two previous and separate efforts to develop an ontology in the engineering design domain, together with an ontology proposal from which ontologies for a specific application may be derived. The research contrasts an empirical, user-centered approach...

  9. Designing Psychological Treatments for Scalability: The PREMIUM Approach.

    Directory of Open Access Journals (Sweden)

    Sukumar Vellakkal

    Full Text Available Lack of access to empirically-supported psychological treatments (EPT that are contextually appropriate and feasible to deliver by non-specialist health workers (referred to as 'counsellors' are major barrier for the treatment of mental health problems in resource poor countries. To address this barrier, the 'Program for Effective Mental Health Interventions in Under-resourced Health Systems' (PREMIUM designed a method for the development of EPT for severe depression and harmful drinking. This was implemented over three years in India. This study assessed the relative usefulness and costs of the five 'steps' (Systematic reviews, In-depth interviews, Key informant surveys, Workshops with international experts, and Workshops with local experts in the first phase of identifying the strategies and theoretical model of the treatment and two 'steps' (Case series with specialists, and Case series and pilot trial with counsellors in the second phase of enhancing the acceptability and feasibility of its delivery by counsellors in PREMIUM with the aim of arriving at a parsimonious set of steps for future investigators to use for developing scalable EPT.The study used two sources of data: the usefulness ratings by the investigators and the resource utilization. The usefulness of each of the seven steps was assessed through the ratings by the investigators involved in the development of each of the two EPT, viz. Healthy Activity Program for severe depression and Counselling for Alcohol Problems for harmful drinking. Quantitative responses were elicited to rate the utility (usefulness/influence, followed by open-ended questions for explaining the rankings. The resources used by PREMIUM were computed in terms of time (months and monetary costs.The theoretical core of the new treatments were consistent with those of EPT derived from global evidence, viz. Behavioural Activation and Motivational Enhancement for severe depression and harmful drinking respectively

  10. Managing Actors, Resources, and Activities in Innovation Ecosystems – A Design Science Approach

    OpenAIRE

    Valkokari , Katri; Amitrano , Cristina ,; Bifulco , Francesco; Valjakka , Tiina

    2016-01-01

    Part 13: Design Science and Business Models - Design Science Research; International audience; Through a design science approach, the paper explores how actors in a network create and sustain competitive advantage independently and through participation in a system of actors (i.e., a collaborative network) who are not hierarchically managed but, rather, act toward their own goals within the innovation ecosystem. In accordance with design studies, the relevance of research and its quality are ...

  11. a basic approach to designing e calculator and c oach to designing

    African Journals Online (AJOL)

    eobe

    machine may have three main functions ree main functions ... most control systems using digital logic w implemented using individual ... OACH TO DESIGNING EMBEDDED SYSTEMS USING A SI. OACH TO .... Jumper Wires. No Units. 1 yard.

  12. Fuel cells : a viable fossil fuel alternative

    Energy Technology Data Exchange (ETDEWEB)

    Paduada, M.

    2007-02-15

    This article presented a program initiated by Natural Resources Canada (NRCan) to develop proof-of-concept of underground mining vehicles powered by fuel cells in order to eliminate emissions. Recent studies on American and Canadian underground mines provided the basis for estimating the operational cost savings of switching from diesel to fuel cells. For the Canadian mines evaluated, the estimated ventilation system operating cost reductions ranged from 29 per cent to 75 per cent. In order to demonstrate the viability of a fuel cell-powered vehicle, NRCan has designed a modified Caterpillar R1300 loader with a 160 kW hybrid power plant in which 3 stacks of fuel cells deliver up to 90 kW continuously, and a nickel-metal hydride battery provides up to 70 kW. The battery subsystem transiently boosts output to meet peak power requirements and also accommodates regenerative braking. Traction for the loader is provided by a brushless permanent magnet traction motor. The hydraulic pump motor is capable of a 55 kW load continuously. The loader's hydraulic and traction systems are operated independently. Future fuel cell-powered vehicles designed by the program may include a locomotive and a utility vehicle. Future mines running their operations with hydrogen-fueled equipment may also gain advantages by employing fuel cells in the operation of handheld equipment such as radios, flashlights, and headlamps. However, the proton exchange membrane (PEM) fuel cells used in the project are prohibitively expensive. The catalytic content of a fuel cell can add hundreds of dollars per kW of electric output. Production of catalytic precious metals will be strongly connected to the scale of use and acceptance of fuel cells in vehicles. In addition, the efficiency of hydrogen production and delivery is significantly lower than the well-to-tank efficiency of many conventional fuels. It was concluded that an adequate hydrogen infrastructure will be required for the mining industry

  13. Keeping checkpoint/restart viable for exascale systems.

    Energy Technology Data Exchange (ETDEWEB)

    Riesen, Rolf E.; Bridges, Patrick G. (IBM Research, Ireland, Mulhuddart, Dublin); Stearley, Jon R.; Laros, James H., III; Oldfield, Ron A.; Arnold, Dorian (University of New Mexico, Albuquerque, NM); Pedretti, Kevin Thomas Tauke; Ferreira, Kurt Brian; Brightwell, Ronald Brian

    2011-09-01

    Next-generation exascale systems, those capable of performing a quintillion (10{sup 18}) operations per second, are expected to be delivered in the next 8-10 years. These systems, which will be 1,000 times faster than current systems, will be of unprecedented scale. As these systems continue to grow in size, faults will become increasingly common, even over the course of small calculations. Therefore, issues such as fault tolerance and reliability will limit application scalability. Current techniques to ensure progress across faults like checkpoint/restart, the dominant fault tolerance mechanism for the last 25 years, are increasingly problematic at the scales of future systems due to their excessive overheads. In this work, we evaluate a number of techniques to decrease the overhead of checkpoint/restart and keep this method viable for future exascale systems. More specifically, this work evaluates state-machine replication to dramatically increase the checkpoint interval (the time between successive checkpoint) and hash-based, probabilistic incremental checkpointing using graphics processing units to decrease the checkpoint commit time (the time to save one checkpoint). Using a combination of empirical analysis, modeling, and simulation, we study the costs and benefits of these approaches on a wide range of parameters. These results, which cover of number of high-performance computing capability workloads, different failure distributions, hardware mean time to failures, and I/O bandwidths, show the potential benefits of these techniques for meeting the reliability demands of future exascale platforms.

  14. The EDIE method – towards an approach to collaboration-based persuasive design

    DEFF Research Database (Denmark)

    Hansen, Sandra Burri Gram

    2016-01-01

    This paper presents the initial steps towards a collaboration-based method for persuasive design – the EDIE method (Explore, Design, Implement, Evaluate). The method is inspired by Design-Based Research, but developed to combine different design approaches that have dominated the persuasive...... technology field over the past decade. The rhetorical notion of Kairos is considered a key element in the EDIE method, resulting in a distinct focus on participatory design and constructive ethics. The method is explained through a practical example of developing persuasive learning designs in collaboration...

  15. Nested structures approach in designing an isotropic negative-index material for infrared

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Malureanu, Radu; Lavrinenko, Andrei

    2009-01-01

    We propose a new generic approach for designing isotropic metamaterial with nested cubic structures. As an example, a three-dimensional isotropic unit cell design "Split Cube in Cage" (SCiC) is shown to exhibit an effective negative refractive index on infrared wavelengths. We report on the refra......We propose a new generic approach for designing isotropic metamaterial with nested cubic structures. As an example, a three-dimensional isotropic unit cell design "Split Cube in Cage" (SCiC) is shown to exhibit an effective negative refractive index on infrared wavelengths. We report...

  16. System Topology Optimization - An Approach to System Design of Electro-Hydraulic-Mechanical Systems

    DEFF Research Database (Denmark)

    Andersen, T. O.; Hansen, M. R.; Conrad, Finn

    2003-01-01

    The current paper presents an approach to system design of combined electro-hydraulic-mechanical systems. The approach is based on the concurrent handling of the topology as well as the design parameters of the mechanical, hydraulic and controller sub- systems, respectively. Based on an initial...... design the procedure attempts to find the optimal topology and the related parameters. The topology considerations comprise the type of hydraulic pump, the employment of knee linkages or not as well as the type of hydraulic actuators. The design variables also include the signals to the proportional...... valve in a number of predefined load cases as well as the hydraulic and mechanical parameters....

  17. Ten ways to design for disgust, sadness, and other enjoyments : A design approach to enrich product experiences with negative emotions

    NARCIS (Netherlands)

    Fokkinga, S.F.; Desmet, P.M.A.

    2013-01-01

    This paper demonstrates how designers can enrich user experiences by purposefully involving negative emotions in user-product interaction. This approach is derived from a framework of rich experience, which explains how and under what circumstances negative emotions make a product experience richer

  18. A preliminary study of mechanistic approach in pavement design to accommodate climate change effects

    Science.gov (United States)

    Harnaeni, S. R.; Pramesti, F. P.; Budiarto, A.; Setyawan, A.

    2018-03-01

    Road damage is caused by some factors, including climate changes, overload, and inappropriate procedure for material and development process. Meanwhile, climate change is a phenomenon which cannot be avoided. The effects observed include air temperature rise, sea level rise, rainfall changes, and the intensity of extreme weather phenomena. Previous studies had shown the impacts of climate changes on road damage. Therefore, several measures to anticipate the damage should be considered during the planning and construction in order to reduce the cost of road maintenance. There are three approaches generally applied in the design of flexible pavement thickness, namely mechanistic approach, mechanistic-empirical (ME) approach and empirical approach. The advantages of applying mechanistic approach or mechanistic-empirical (ME) approaches are its efficiency and reliability in the design of flexible pavement thickness as well as its capacity to accommodate climate changes in compared to empirical approach. However, generally, the design of flexible pavement thickness in Indonesia still applies empirical approach. This preliminary study aimed to emphasize the importance of the shifting towards a mechanistic approach in the design of flexible pavement thickness.

  19. Viable Solutions for seemingly Intractable Problems

    Directory of Open Access Journals (Sweden)

    Ashok Natarajan

    2015-10-01

    Full Text Available Life is filled with seemingly intractable problems. But life wisdom affirms that if there is a problem, there must be a solution. Or better yet, the solution to the problem lies within the problem itself. Problems have their roots in disharmony. Disharmony arises when a part separates itself from the whole and acts independently of the wider reality of which it is a part, as financial markets have separated themselves from the real economy and economy has detached itself from social and ecological consequences. Insistence on out-moded approaches under new conditions generates intractable problems, as when the framework of a heterogeneous nation-state is employed for the dominance of a single ethnic or religious group. Knowledge and culture are the supreme values of a society and core element of its capacity for accomplishment and development, yet both tend to be exclusively possessed by elites for their own benefit, rather than freely distributed to maximize their impact on society as a whole. Society evolves by the transformation of ignorance into knowledge. Life evolves by organization. The linking and integration of social organizations spur development. Mind itself is an organization and powerful force for development. Energy makes organization more efficient. Any problem can be solved by raising the effectiveness of energy by converting it into skill or capacity and transforming it into power through organization. What one person sees as a problem is an opportunity for another with wider vision. The difference in perception accounts for the difference in levels of accomplishment. So, those with the right perspective see opportunities where others see insolvable problems. Current problems are the result of irrationality, refusal to benefit from past experience and insistence on repeating past errors. Modern science, which was born to fight the superstition of religion, has become a source of superstition. Fully availing of the latest

  20. Design Interactive: A Nonlinear, Multimedia Approach to Teaching Introduction to Visual Communication and Principles of Design

    Science.gov (United States)

    Palilonis, Jennifer; Butler, Darrell; Leidig-Farmen, Pamela

    2013-01-01

    As online teaching techniques continue to evolve, new opportunities surface for research and insight regarding best practices for the development and implementation of interactive, multimedia teaching and learning tools. These tools are particularly attractive for courses that lend themselves to a rich media approach. Such is the case for visual…

  1. An approach to participatory instructional design in secondary education: an exploratory study

    NARCIS (Netherlands)

    Könings, Karen; Brand-Gruwel, Saskia; Van Merriënboer, Jeroen

    2010-01-01

    Könings, K. D., Brand-Gruwel, S., & Van Merriënboer, J. J. G. (2010). An approach to participatory instructional design in secondary education: an exploratory study. Educational Research, 52(1), 45-59.

  2. Appropriate passive design approaches for the various climatic regions in South Africa

    CSIR Research Space (South Africa)

    Conradie, Dirk CU

    2013-01-01

    Full Text Available Previous chapters, Maximising the Sun (Conradie, 2011) and SA Climate Zones and Weather Files (Conradie, 2012), gave an introduction of the current South African climatic characteristics. This chapter explores appropriate passive design approaches...

  3. Using a Competitive Approach to Improve Military Simulation Artificial Intelligence Design

    National Research Council Canada - National Science Library

    Stoykov, Sevdalin

    2008-01-01

    ...) design can lead to improvement of the AI solutions used in military simulations. To demonstrate the potential of the competitive approach, ORTS, a real-time strategy game engine, and its competition setup are used...

  4. The design of Eco Board Games as an umbrella approach to sustainable product design education

    DEFF Research Database (Denmark)

    Boks, Casper; McAloone, Tim C.

    2009-01-01

    The multidisciplinarity and quickly broadening scope of sustainable product design education provide incentives for experimentation with different pedagogical techniques. One of these, involving the development of eco board games, has been used at both the Technical University Denmark and the Nor......The multidisciplinarity and quickly broadening scope of sustainable product design education provide incentives for experimentation with different pedagogical techniques. One of these, involving the development of eco board games, has been used at both the Technical University Denmark...... and the Norwegian University of Science and Technology. This paper aims to reflect on the experiences, in terms of ratonales, learning goals, possible variations of the exercise, delivered course work, and future ambitions....

  5. LEGAL CERTAINTY OF INDUSTRIAL DESIGN REVENUE IN INDONESIA BASED ON INTELLECTUAL PROPERTY APPROACH AND LEGAL COMPARISON

    Directory of Open Access Journals (Sweden)

    Ranti Fauza Mayana

    2018-03-01

    Full Text Available [Legal Certainty Of Industrial Design Revenue  In Indonesia Based On Intellectual Property Approach And Legal Comparison]  Protection of Industrial Designs, as well as intellectual property, is based on the ability of human creativity through creativity, taste and intention. According to Article 25 paragraph (1 TRIPs Protected Industrial Design Agreement is a new or original Industrial Design, this provision holds the principle that the novelty of a design is obtained when the design is differ from the previous, the novelty includes novelty and originality, the principal basis for the grant of Industrial Design, whereas this principle is not fully adopted in the provisions of Industrial Design. The Industrial Design Decree in Indonesia only requires novelty without clarifying how to interpret the novelty requirement so that a large number of Industrial Design Rights are obtained based on the Minor Change approach where slight differences in form and configuration have essentially demonstrated novelty. The minor change approach is considered to exclude the aspect of originality and is less able to provide legal certainty to the holder of the registered Industrial Design Rights. This paper aims to explore minor change approach as the basis for the evaluation of the novelty of Industrial Design in the perspective of comparative law in several countries of the world, namely the United States, Japan, the European Union and Australia as a study and reference material in an effort to establish protection of Industrial Design Rights in Indonesia that can provide legal certainty. Keywords: Industrial Design Revenue, Comparative Law.

  6. Challenges and Limitations of Applying an Emotion-driven Design Approach on Elderly Users

    DEFF Research Database (Denmark)

    Andersen, Casper L.; Gudmundsson, Hjalte P.; Achiche, Sofiane

    2011-01-01

    a competitive advantage for companies. In this paper, challenges of applying an emotion-driven design approach applied on elderly people, in order to identify their user needs towards walking frames, are discussed. The discussion will be based on the experiences and results obtained from the case study...... related to the participants’ age and cognitive abilities. The challenges encountered are discussed and guidelines on what should be taken into account to facilitate an emotion-driven design approach for elderly people are proposed....

  7. Materials selection in micromechanical design: an application of the Ashby approach

    OpenAIRE

    Srikar, V.T.; Spearing, S.M.

    2003-01-01

    The set of materials available to microsystems designers is rapidly expanding. Techniques now exist to introduce and integrate a large number of metals, alloys, ceramics, glasses, polymers, and elastomers into microsystems, motivating the need for a rational approach for materials selection in microsystems design. As a step toward such an approach, we focus on the initial stages of materials selection for micromechanical structures with minimum feature sizes greater than 1 /spl mu/m. The vari...

  8. Russian regulatory approaches to seismic design and seismic analysis of NPP piping

    International Nuclear Information System (INIS)

    Kaliberda, Y.V.

    2003-01-01

    The paper presents an overview of Russian regulatory approaches to seismic design and seismic analysis of NPP piping. The paper is focused on categorization and seismic analysis of nuclear power plant items (piping, equipment, supports, valves, but not building structures). The paper outlines the current seismic recommendations, corresponding methods with the examples of calculation models. The paper considers calculation results of the mechanisms of dynamic behavior and the problems of developing a rational and economical approaches to seismic design and seismic protection. (author)

  9. Design of a flight director/configuration management system for piloted STOL approaches

    Science.gov (United States)

    Hoh, R. H.; Klein, R. H.; Johnson, W. A.

    1973-01-01

    The design and characteristics of a flight director for V/STOL aircraft are discussed. A configuration management system for piloted STOL approaches is described. The individual components of the overall system designed to reduce pilot workload to an acceptable level during curved, decelerating, and descending STOL approaches are defined. The application of the system to augmentor wing aircraft is analyzed. System performance checks and piloted evaluations were conducted on a flight simulator and the results are summarized.

  10. A Declarative Design Approach to Modeling Traditional and Non-Traditional Space Systems

    Science.gov (United States)

    Hoag, Lucy M.

    The space system design process is known to be laborious, complex, and computationally demanding. It is highly multi-disciplinary, involving several interdependent subsystems that must be both highly optimized and reliable due to the high cost of launch. Satellites must also be capable of operating in harsh and unpredictable environments, so integrating high-fidelity analysis is important. To address each of these concerns, a holistic design approach is necessary. However, while the sophistication of space systems has evolved significantly in the last 60 years, improvements in the design process have been comparatively stagnant. Space systems continue to be designed using a procedural, subsystem-by-subsystem approach. This method is inadequate since it generally requires extensive iteration and limited or heuristic-based search, which can be slow, labor-intensive, and inaccurate. The use of a declarative design approach can potentially address these inadequacies. In the declarative programming style, the focus of a problem is placed on what the objective is, and not necessarily how it should be achieved. In the context of design, this entails knowledge expressed as a declaration of statements that are true about the desired artifact instead of explicit instructions on how to implement it. A well-known technique is through constraint-based reasoning, where a design problem is represented as a network of rules and constraints that are reasoned across by a solver to dynamically discover the optimal candidate(s). This enables implicit instantiation of the tradespace and allows for automatic generation of all feasible design candidates. As such, this approach also appears to be well-suited to modeling adaptable space systems, which generally have large tradespaces and possess configurations that are not well-known a priori. This research applied a declarative design approach to holistic satellite design and to tradespace exploration for adaptable space systems. The

  11. Cross-Layer Design Approach for Power Control in Mobile Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    A. Sarfaraz Ahmed

    2015-03-01

    Full Text Available In mobile ad hoc networks, communication among mobile nodes occurs through wireless medium The design of ad hoc network protocol, generally based on a traditional “layered approach”, has been found ineffective to deal with receiving signal strength (RSS-related problems, affecting the physical layer, the network layer and transport layer. This paper proposes a design approach, deviating from the traditional network design, toward enhancing the cross-layer interaction among different layers, namely physical, MAC and network. The Cross-Layer design approach for Power control (CLPC would help to enhance the transmission power by averaging the RSS values and to find an effective route between the source and the destination. This cross-layer design approach was tested by simulation (NS2 simulator and its performance over AODV was found to be better.

  12. Model-based design approaches for plug-in hybrid vehicle design

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, C.J. [CrossChasm Technologies, Cambridge, ON (Canada); Stevens, M.B.; Fowler, M.W. [Waterloo Univ., ON (Canada). Dept. of Chemical Engineering; Fraser, R.A. [Waterloo Univ., ON (Canada). Dept. of Mechanical Engineering; Wilhelm, E.J. [Paul Scherrer Inst., Villigen (Switzerland). Energy Systems Analysis

    2007-07-01

    A model-based design process for plug-in hybrid vehicles (PHEVs) was presented. The paper discussed steps between the initial design concept and a working vehicle prototype, and focused on an investigation of the software-in-the-loop (SIL), hardware-in-the-loop (HIL), and component-in-the-loop (CIL) design phases. The role and benefits of using simulation were also reviewed. A method for mapping and identifying components was provided along with a hybrid control strategy and component-level control optimization process. The role of simulation in component evaluation, architecture design, and de-bugging procedures was discussed, as well as the role simulation networks can play in speeding deployment times. The simulations focused on work performed on a 2005 Chevrolet Equinox converted to a fuel cell hybrid electric vehicle (FCHEV). Components were aggregated to create a complete virtual vehicle. A simplified vehicle model was implemented onto the on-board vehicle control hardware. Optimization metrics were estimated at 10 alpha values during each control loop iteration. The simulation was then used to tune the control system under a variety of drive cycles and conditions. A CIL technique was used to place a physical hybrid electric vehicle (HEV) component under the control of a real time HEV/PHEV simulation. It was concluded that controllers should have a standardized component description that supports integration into advanced testing procedures. 4 refs., 9 figs.

  13. Implementing Universal Design Strategies in Municipalities - A Multidisciplinary Approach to Universal Design and Public Health.

    Science.gov (United States)

    Jensen, Roger

    2016-01-01

    Based on a national program, the regional authorities stimulated each of the 18 municipalities in Telemark 2012-15 to plan and build promenades with universal design. The cooperation between different disciplines was an important factor for good results. The project continues from 2016.

  14. Designing out stigma : a new approach to designing for human diversity

    OpenAIRE

    Bispo, Renato; Branco, Vasco

    2011-01-01

    Comunicação apresentada na conferência The Enless End, Porto, 2011. This paper sets out to present and discuss the “Designing Out Stigma” research project which focused on understanding stigma associated with products and on the repercussions of their use on the building of self-image.

  15. Talons and beaks are viable but underutilized samples for detecting ...

    African Journals Online (AJOL)

    Talons and beaks are viable but underutilized samples for detecting organophosphorus and carbamate pesticide poisoning in raptors. Ngaio Richards, Irene Zorrilla, Joseph Lalah, Peter Otieno, Isabel Fernandez, Monica Calvino, Joaquin Garcia ...

  16. Promoting Women Participation in Aquaculture as a Viable Tool for ...

    African Journals Online (AJOL)

    Promoting Women Participation in Aquaculture as a Viable Tool for Poverty Alleviation in the Rural Areas of Nigeria. ... Open Access DOWNLOAD FULL TEXT ... a source of income, also the paper focus on the roles of women in aquaculture, ...

  17. Experimental design techniques in statistical practice a practical software-based approach

    CERN Document Server

    Gardiner, W P

    1998-01-01

    Provides an introduction to the diverse subject area of experimental design, with many practical and applicable exercises to help the reader understand, present and analyse the data. The pragmatic approach offers technical training for use of designs and teaches statistical and non-statistical skills in design and analysis of project studies throughout science and industry. Provides an introduction to the diverse subject area of experimental design and includes practical and applicable exercises to help understand, present and analyse the data Offers technical training for use of designs and teaches statistical and non-statistical skills in design and analysis of project studies throughout science and industry Discusses one-factor designs and blocking designs, factorial experimental designs, Taguchi methods and response surface methods, among other topics.

  18. The Open Form Inducer Approach for Structure-Based Drug Design.

    Directory of Open Access Journals (Sweden)

    Daniel Ken Inaoka

    Full Text Available Many open form (OF structures of drug targets were obtained a posteriori by analysis of co-crystals with inhibitors. Therefore, obtaining the OF structure of a drug target a priori will accelerate development of potent inhibitors. In addition to its small active site, Trypanosoma cruzi dihydroorotate dehydrogenase (TcDHODH is fully functional in its monomeric form, making drug design approaches targeting the active site and protein-protein interactions unrealistic. Therefore, a novel a priori approach was developed to determination the TcDHODH active site in OF. This approach consists of generating an "OF inducer" (predicted in silico to bind the target and cause steric repulsion with flexible regions proximal to the active site that force it open. We provide the first proof-of-concept of this approach by predicting and crystallizing TcDHODH in complex with an OF inducer, thereby obtaining the OF a priori with its subsequent use in designing potent and selective inhibitors. Fourteen co-crystal structures of TcDHODH with the designed inhibitors are presented herein. This approach has potential to encourage drug design against diseases where the molecular targets are such difficult proteins possessing small AS volume. This approach can be extended to study open/close conformation of proteins in general, the identification of allosteric pockets and inhibitors for other drug targets where conventional drug design approaches are not applicable, as well as the effective exploitation of the increasing number of protein structures deposited in Protein Data Bank.

  19. Expression of proposed implantation marker genes CDX2 and HOXB7 in the blastocyst does not distinguish viable from non-viable human embryos

    DEFF Research Database (Denmark)

    Kirkegaard, Kirstine; Hindkjær, Johnny Juhl; Ingerslev, Hans Jakob

    2012-01-01

    expression differs between viable and non-viable embryos in both human and non-humans, suggesting transcriptome analysis of trophectoderm (TE) as a novel method of improving embryo selection. Potential candidate marker genes have been identified with array studies on animal blastocysts. The aim of this study...... was to investigate the expression of selected genes in human blastocysts in relation to the outcome of implantation. Materials and methods: Embryos from 10 oatients undergoing in vitro fertilization treatment were included in the project. A single blastocyst was chosen for biopsy on the morning of day 5 after oocyte...... of 15 key genes associated with developmental competence in animals were evaluated in high quality human embryos with monogenic or chromosomal disorders from a pre-implantation genetic disorder program. Triplicate cDNA amplifications for quantitative (q) RT-PCR were performed using pre-designed gene...

  20. An unified approach for the design of focal-plane arrays in satellite communication

    NARCIS (Netherlands)

    Zamanifekri, A.; Smolders, A.B.

    2012-01-01

    The aim of this paper is to present a hybrid approach for designing focal plane arrays using commercially available software, considering the fact that the main trade-off in the EM simulation is the accuracy versus computational power. The presented approach is hybrid method based on FDTD/PO. The